diff --git a/CHANGELOG.md b/CHANGELOG.md
index 778f25e49..54439952b 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -5,6 +5,7 @@ All notable changes to Bambuddy will be documented in this file.
 ## [1.2.6b1] - Unreleased
 
 ### Added
+- **Colour swatches for printer slots in the Print / Schedule dialog's filament mapping (#3159, requested by @frantiseklorenc)** — The dialog's filament mapping compares the colour the slice asked for against the colour actually in the machine, and until now only the left-hand side of that comparison had a swatch. The right-hand side — the slot, and every slot in its dropdown — was text, and the text is not reliable: a slot's colour name comes from the Color Catalog or, failing that, from hue, so a third-party beige is announced as "Orange". On a farm running twenty or thirty non-Bambu colours that are swapped between machines daily, a "Color mismatch" warning then gives no way to tell a real mismatch from two names for the same hex without opening the printer card in another tab. Each slot now carries its colour, in the picker and on the row, together with its hex; the slot whose colour is exactly the one the slice asked for is ticked. It works for a slot bound to an inventory spool and for one configured through Configure Slot or on the printer itself, which is the distinction that mattered — the second kind has no inventory row behind it and draws the colour the printer reports. A bound spool also contributes what a tray record cannot carry: its remaining colour stops and its effect, so a two-tone or glittery spool draws as itself rather than as its base colour. The same treatment is applied to the filament-override picker used for model-based assignment, which is the same choice on the other dispatch path and would otherwise have stayed text-only. Both controls stop being `<select>`s to do it — an `<option>` renders text and nothing else — and both keep full keyboard operation, listbox semantics and the border colouring that encodes match, same-type-different-colour and not-loaded.
 - **Swedish (sv) is now a supported interface language (#3052, requested and contributed by @AntonPalmqvist in #3062)** — Adds `sv` as the fifteenth locale, listed as "Svenska" in the language picker. The file arrived in better structural shape than any locale contribution so far: 6302 leaves in 458 objects, the same shape as `en.ts` down to the nesting, no duplicate keys, no keys `sv` has that `en` does not, plural suffixes exact, and every `<Trans>` component tag preserved — French has quietly dropped `<strong>` from five strings and nobody noticed, so that is a real bar. The 74 entries in the new `SV_COGNATES` allow-list were each checked against the strings actually identical to English: every one is load-bearing, none dead, which is what the list's "curated, not a shortcut" comment claims. Four things needed correcting before it could be wired up. The submission was clean on the day it was made and then went stale: thirteen keys and three placeholder sets landed on `dev` in the fortnight that followed (#3051, #3063, #1334, #3090, #3092, #3114, #3110), so `{{id}}` in `inventory.tagAlreadyLinked` and `{{runtime}}` in two `diagnostic.check.network_mode` strings were missing and the parity gate was red through no fault of the translation. More consequential, three literal identifiers had been translated along with the prose around them: `device/<serial>/report` and `{{prefix}}/printers/<serial>/status` are MQTT topics on the wire, and the column names in the CSV import hint are what the importer matches on — `märke, subtyp, färgnamn` would have told a Swedish user to build a file that cannot import, so the columns are verbatim again and only the word describing them is translated, the way `de`, `fr`, `nl`, `it` and `es` do it. The four `backup.repoUrlPlaceholder` values were changed back from `exempel.com` to `example.com`, which is the domain reserved for documentation; `exempel.com` belongs to somebody. And the file had been using both `slicer` and the `skivare` family for the same word — a problem in a translation that says `skrivare` or one of its inflections 377 times, with `skivaren` one letter away from `skrivaren` and both words landing in the same sentence in `diagnostic.check.printer_publishing.pass`. It is `slicer` throughout now. Three strings left in English were also translated rather than exempted (`Support` → Stöd, `Teal` → Blågrön, `Display` → Skärm), which retired three cognate entries. Parity green at 6302 leaves across all 15 locales.
 - **Sub-projects on the Projects page can be folded away (#2991)** — A project with sub-projects drew every one of them expanded underneath it, at every level, with nothing to shut. That is fine for two projects and unusable for a three-level hierarchy over a couple of hundred archives, where the page becomes one long scroll before the first thing you were looking for. Each group's "Sub-projects of X" caption is now a chevron that folds that group, and a **Collapse** pill next to the status filter tabs sets the default for the whole page and is remembered across reloads. The caption stays visible when a group is shut — it is the way back in, and it carries a count of what is behind it. That count is of the cards actually nested there, not the card's own sub-project badge: the API counts sub-projects across every status on purpose, so under the default Active filter the badge can legitimately say 2 where only one card will unfold. A group folded by hand deviates from the default until the pill is pressed, which resets those deviations rather than leaving a group defying the switch that was just flipped. Nothing changes for a page with no nesting, where the pill is not shown at all, and the default with no stored preference is still fully expanded.
 - **A spool can carry a different filament preset on each printer model, and its K profiles are picked per hotend** — A slicer preset is bound to a printer model: `Bambu PLA Basic @BBL X1C` is not the same preset as `@BBL H2C`. A spool stored exactly one, which was right until the same spool was used on a second model — the AMS slot on the other machine was then configured with a preset that machine has no profile for. The spool form's PA Profile tab is now a **Printers** tab holding both halves of the answer: a model list on the left, and on the right that model's filament presets and the K profiles for each of its hotends. Presets are keyed on the printer *model*, because `@BBL X1C` is the same preset on every X1C you own and asking once per machine would mean picking the identical value twice; K profiles stay keyed on the individual printer, extruder and nozzle diameter, because a K value is measured on one physical hotend and two machines of the same model legitimately differ. Both halves cover **every nozzle size — 0.2, 0.4, 0.6 and 0.8 — not only the size currently fitted**, because a spool is configured once and nozzles get swapped: presets get a row per size (the preset is written to an AMS slot, a slot feeds exactly one nozzle, and Bambu names its presets per size anyway), and K profiles are laid out as a grid with size down the side and hotend across the top, a dash marking a size the printer has no calibration for. Anything left alone inherits the spool's own preset and keeps inheriting it when that changes later, so only what actually differs needs an override, and a spool nobody has configured behaves exactly as it did before. Each model is offered only the presets that name it — using the same matcher the Configure AMS Slot modal filters with, now shared between them — while presets whose name identifies no model, which is most user-authored and OrcaSlicer ones, stay available everywhere, and a preset already saved is never hidden from the control that shows it. Every preset carries an origin badge — Bambu Cloud, Orca Cloud, Local or Built-in — in the same wording and colours the Configure AMS Slot modal has used since #1623, because the same filament exists in several of those sources and which one is picked decides what actually reaches the printer. **Auto-match** fills every size of every model with the variant of the spool's preset that names it, preferring the variant for that exact size; a model with no such variant is left inherited rather than given an approximate one. The model list stays one row per model however large the fleet is, and carries a count of hotends still without a K profile so an unfinished spool is visible without opening anything. One limit worth knowing: a per-model override can be one of your own cloud presets, whose id the slicer refuses in a slot's filament field, so such an override configures the slot but is not used as the calibration link — the spool's own preset is used there instead.
diff --git a/backend/app/services/filament_deficit.py b/backend/app/services/filament_deficit.py
index 684bf3c18..a347df974 100644
--- a/backend/app/services/filament_deficit.py
+++ b/backend/app/services/filament_deficit.py
@@ -342,6 +342,15 @@ class SlotSpoolIdentity:
     subtype: str | None
     color_name: str | None
     rgba: str | None
+    # The rest of the spool's colour, for drawing it rather than naming it
+    # (#3159). A tray record carries one hex and nothing else, so a two-tone
+    # or glittery spool renders as its base colour unless the binding says
+    # otherwise -- and on a farm of third-party spools that is exactly the
+    # swatch somebody is comparing against the slicer's colour. Same shape the
+    # inventory row stores: ``extra_colors`` a comma-separated hex list,
+    # ``effect_type`` one of the client's FilamentEffect names.
+    extra_colors: str | None = None
+    effect_type: str | None = None
 
     def to_dict(self) -> dict:
         return {
@@ -350,6 +359,8 @@ class SlotSpoolIdentity:
             "subtype": self.subtype,
             "color_name": self.color_name,
             "rgba": self.rgba,
+            "extra_colors": self.extra_colors,
+            "effect_type": self.effect_type,
         }
 
 
@@ -367,6 +378,8 @@ def _identity_from_internal(spool) -> SlotSpoolIdentity:
         subtype=_clean(spool.subtype),
         color_name=_clean(spool.color_name),
         rgba=_clean(spool.rgba),
+        extra_colors=_clean(spool.extra_colors),
+        effect_type=_clean(spool.effect_type),
     )
 
 
@@ -408,6 +421,11 @@ def _identity_from_spoolman(spool_dict: dict) -> SlotSpoolIdentity | None:
         subtype=_clean(mapped.get("subtype")),
         color_name=color_name,
         rgba=_clean(mapped.get("rgba")),
+        # `_map_spoolman_spool` builds `extra_colors` from Spoolman's own
+        # multi-colour hexes and pins `effect_type` to None, because Spoolman
+        # has no field for it -- see the note there.
+        extra_colors=_clean(mapped.get("extra_colors")),
+        effect_type=_clean(mapped.get("effect_type")),
     )
 
 
diff --git a/backend/tests/unit/services/test_filament_deficit.py b/backend/tests/unit/services/test_filament_deficit.py
index ae4a0353b..2367fbe78 100644
--- a/backend/tests/unit/services/test_filament_deficit.py
+++ b/backend/tests/unit/services/test_filament_deficit.py
@@ -991,8 +991,52 @@ class TestSlotSpoolIdentity:
             # naming this slot from the hex is exactly the bug.
             "color_name": "Orange",
             "rgba": "FEC600FF",
+            # A plain single-colour spool: nothing extra to draw (#3159).
+            "extra_colors": None,
+            "effect_type": None,
         }
 
+    @pytest.mark.asyncio
+    async def test_internal_mode_carries_the_rest_of_the_colour(self, db_session, printer_factory):
+        """A tray record holds one hex, so the binding is the only source for the rest.
+
+        Without this the Print dialog's slot picker (#3159) draws a two-tone or
+        glittery spool as its base colour -- the one comparison the picker
+        exists to make, made against the wrong swatch.
+        """
+        from backend.app.services.filament_deficit import build_slot_materials
+
+        printer = await printer_factory(model="H2C")
+        spool = Spool(
+            brand="eSUN",
+            material="PLA",
+            subtype="Multicolor",
+            color_name="Rainbow",
+            rgba="FF0000FF",
+            extra_colors="00FF00,0000FF",
+            effect_type="Glitter",
+            label_weight=1000,
+            weight_used=0.0,
+        )
+        db_session.add(spool)
+        await db_session.commit()
+        await db_session.refresh(spool)
+        await _assign(db_session, printer_id=printer.id, spool_id=spool.id, ams_id=2, tray_id=0)
+
+        patches = TestFilamentDeficitBackupAware._patch_status(printer_id=printer.id, backup_on=False, model="H2C")
+        for p in patches:
+            p.start()
+        try:
+            slots = await build_slot_materials(db_session, printer.id)
+        finally:
+            for p in patches:
+                p.stop()
+
+        identity = slots[0].spool
+        assert identity is not None
+        assert identity.extra_colors == "00FF00,0000FF"
+        assert identity.effect_type == "Glitter"
+
     @pytest.mark.asyncio
     async def test_blank_fields_become_null_so_the_client_can_fall_back(self, db_session, printer_factory):
         """Per-field, not all-or-nothing: an unnamed colour still falls back to
diff --git a/backend/tests/unit/test_inventory_remain_endpoint.py b/backend/tests/unit/test_inventory_remain_endpoint.py
index 6eb2f7405..2fdccf28f 100644
--- a/backend/tests/unit/test_inventory_remain_endpoint.py
+++ b/backend/tests/unit/test_inventory_remain_endpoint.py
@@ -206,4 +206,8 @@ class TestGetInventoryRemain:
             "subtype": "Basic",
             "color_name": "Orange",
             "rgba": "FEC600FF",
+            # The rest of the colour, for the slot picker's swatch (#3159).
+            # None here: this spool is a single flat colour.
+            "extra_colors": None,
+            "effect_type": None,
         }
diff --git a/frontend/src/__tests__/components/FilamentMapping.test.tsx b/frontend/src/__tests__/components/FilamentMapping.test.tsx
index d1917fa40..e45ca8522 100644
--- a/frontend/src/__tests__/components/FilamentMapping.test.tsx
+++ b/frontend/src/__tests__/components/FilamentMapping.test.tsx
@@ -10,13 +10,29 @@
  */
 
 import { describe, it, expect, beforeEach, afterEach, vi } from 'vitest';
-import { screen, waitFor, cleanup, fireEvent } from '@testing-library/react';
+import { screen, waitFor, cleanup, fireEvent, within } from '@testing-library/react';
 import { http, HttpResponse } from 'msw';
 import { render } from '../utils';
 import { server } from '../mocks/server';
 import { FilamentMapping } from '../../components/PrintModal/FilamentMapping';
 import type { PrinterStatus } from '../../api/client';
 
+/**
+ * Open the slot picker and hand back its listbox.
+ *
+ * The picker replaced a native `<select>` (#3159). A `<select>` keeps every
+ * `<option>` mounted whether or not it is open, so these assertions used to
+ * read the closed control; a listbox renders its rows only while open. They
+ * are about what the user is *offered*, so they open it first — and scope to
+ * the listbox, because the chosen slot's label now also appears on the
+ * trigger.
+ */
+async function openSlotPicker(): Promise<HTMLElement> {
+  const trigger = await waitFor(() => screen.getAllByRole('combobox')[0]);
+  fireEvent.click(trigger);
+  return await waitFor(() => screen.getByRole('listbox'));
+}
+
 const mockFilamentReqs = {
   filaments: [
     // Required filament asks for the LEFT extruder (nozzle_id=1).
@@ -92,19 +108,18 @@ describe('FilamentMapping — FTS routing', () => {
       />,
     );
 
-    // Both PLA and PETG slots must appear in the dropdown despite ams_extruder_map
-    // being empty and the requirement asking for nozzle 1. Without the FTS guard
-    // the dropdown would render only the "-- Select slot --" placeholder.
-    await waitFor(() => {
-      expect(screen.getByText(/Bambu PLA/)).toBeInTheDocument();
-    });
-    expect(screen.getByText(/Bambu PETG/)).toBeInTheDocument();
+    // Both PLA and PETG slots must be offered despite ams_extruder_map being
+    // empty and the requirement asking for nozzle 1. Without the FTS guard the
+    // picker would offer only the "-- Select slot --" placeholder.
+    const listbox = await openSlotPicker();
+    expect(within(listbox).getByText(/Bambu PLA/)).toBeInTheDocument();
+    expect(within(listbox).getByText(/Bambu PETG/)).toBeInTheDocument();
 
     // Each slot is badged for the switch INLET its AMS is plumbed into, using
     // the same L-for-In-A lettering as the printer card. Both slots are in
     // AMS 0, which is on In-A.
-    expect(screen.getByText(/Bambu PETG/).textContent).toMatch(/\[L\]/);
-    expect(screen.getByText(/Bambu PLA/).textContent).toMatch(/\[L\]/);
+    expect(within(listbox).getByText(/Bambu PETG/).textContent).toMatch(/\[L\]/);
+    expect(within(listbox).getByText(/Bambu PLA/).textContent).toMatch(/\[L\]/);
   });
 
   it('does not badge slots whose AMS has no inlet binding yet', async () => {
@@ -135,10 +150,8 @@ describe('FilamentMapping — FTS routing', () => {
       />,
     );
 
-    await waitFor(() => {
-      expect(screen.getByText(/Bambu PETG/)).toBeInTheDocument();
-    });
-    expect(screen.getByText(/Bambu PETG/).textContent).not.toMatch(/\[[LR]\]/);
+    const listbox = await openSlotPicker();
+    expect(within(listbox).getByText(/Bambu PETG/).textContent).not.toMatch(/\[[LR]\]/);
   });
 
   it('renders the per-slot force-color-match checkbox in printer mode (#1717)', async () => {
@@ -258,12 +271,11 @@ describe('FilamentMapping — FTS routing', () => {
     );
 
     // Required nozzle is 1 (LEFT) and AMS 0 is wired to extruder 0 (RIGHT).
-    // Both slots must STILL appear so the user can pick them — explicitly the
-    // cross-extruder scenario the #1722 fix unblocks.
-    await waitFor(() => {
-      expect(screen.getByText(/Bambu PLA/)).toBeInTheDocument();
-    });
-    expect(screen.getByText(/Bambu PETG/)).toBeInTheDocument();
+    // Both slots must STILL be offered so the user can pick them — explicitly
+    // the cross-extruder scenario the #1722 fix unblocks.
+    const listbox = await openSlotPicker();
+    expect(within(listbox).getByText(/Bambu PLA/)).toBeInTheDocument();
+    expect(within(listbox).getByText(/Bambu PETG/)).toBeInTheDocument();
   });
 
   it('renders sub-brand + material-disambiguated colour on the required side (#1718)', async () => {
diff --git a/frontend/src/__tests__/components/FilamentOverride.test.tsx b/frontend/src/__tests__/components/FilamentOverride.test.tsx
index 6481cf772..12d95f16e 100644
--- a/frontend/src/__tests__/components/FilamentOverride.test.tsx
+++ b/frontend/src/__tests__/components/FilamentOverride.test.tsx
@@ -6,7 +6,7 @@
  */
 
 import { describe, it, expect, vi, afterEach } from 'vitest';
-import { screen, fireEvent, cleanup, waitFor } from '@testing-library/react';
+import { screen, fireEvent, cleanup, waitFor, within } from '@testing-library/react';
 import { http, HttpResponse } from 'msw';
 import { render } from '../utils';
 import { server } from '../mocks/server';
@@ -27,6 +27,33 @@ const defaultAvailable = [
 
 const mockOnChange = vi.fn();
 
+/**
+ * Open an override picker and hand back its rows.
+ *
+ * These assertions used to read `select.querySelectorAll('option')`. The
+ * control gained a swatch per choice (#3159), which an `<option>` cannot
+ * render, so it is a listbox now: its rows exist only while it is open, and
+ * each carries its identity on `data-value` the way `<option value>` did.
+ */
+function openPicker(index = 0): HTMLElement[] {
+  fireEvent.click(screen.getAllByRole('combobox')[index]);
+  return within(screen.getByRole('listbox')).getAllByRole('option');
+}
+
+/** The identities the picker offers, in order — the old `option.value` list. */
+function optionValues(index = 0): (string | null)[] {
+  return openPicker(index).map((o) => o.getAttribute('data-value'));
+}
+
+/**
+ * What the closed control reads as. With nothing overridden this is the
+ * "original filament" row, which is where the #1718 label resolution lands —
+ * previously read off `option[value=""]`.
+ */
+function triggerText(index = 0): string {
+  return screen.getAllByRole('combobox')[index].textContent ?? '';
+}
+
 afterEach(() => {
   cleanup();
   vi.clearAllMocks();
@@ -122,15 +149,10 @@ describe('FilamentOverride', () => {
         />
       );
 
-      const select = screen.getByRole('combobox');
-      const options = select.querySelectorAll('option');
-
-      // 1 default "Original" option + 2 PLA options (not PETG)
-      expect(options).toHaveLength(3);
-
-      // Verify no PETG option values exist
-      const optionValues = Array.from(options).map((o) => o.getAttribute('value'));
-      expect(optionValues).not.toContain('PETG|#0000FF');
+      // 1 default "Original" row + 2 PLA rows (not PETG)
+      const values = optionValues();
+      expect(values).toHaveLength(3);
+      expect(values).not.toContain('PETG|#0000FF');
     });
 
     it('shows all same-type options regardless of color', () => {
@@ -149,11 +171,8 @@ describe('FilamentOverride', () => {
         />
       );
 
-      const select = screen.getByRole('combobox');
-      const options = select.querySelectorAll('option');
-
-      // 1 default "Original" option + 3 PLA color options
-      expect(options).toHaveLength(4);
+      // 1 default "Original" row + 3 PLA colour rows
+      expect(optionValues()).toHaveLength(4);
     });
   });
 
@@ -173,9 +192,7 @@ describe('FilamentOverride', () => {
         />
       );
 
-      const select = screen.getByRole('combobox');
-      const options = Array.from(select.querySelectorAll('option'));
-      const optionTexts = options.map((o) => o.textContent);
+      const optionTexts = openPicker().map((o) => o.textContent);
 
       // Should show "PLA Basic" and "PLA Matte", not just "PLA"
       expect(optionTexts.some((t) => t?.includes('PLA Basic'))).toBe(true);
@@ -196,11 +213,9 @@ describe('FilamentOverride', () => {
         />
       );
 
-      const select = screen.getByRole('combobox');
-      const options = Array.from(select.querySelectorAll('option'));
-      // Non-default option should show "PLA" as the type fallback
-      const nonDefaultOptions = options.filter((o) => o.getAttribute('value') !== '');
-      expect(nonDefaultOptions[0].textContent).toContain('PLA');
+      // Non-default row should show "PLA" as the type fallback
+      const nonDefault = openPicker().filter((o) => o.getAttribute('data-value') !== '');
+      expect(nonDefault[0].textContent).toContain('PLA');
     });
   });
 
@@ -226,15 +241,11 @@ describe('FilamentOverride', () => {
         />
       );
 
-      const select = screen.getByRole('combobox');
-      const options = select.querySelectorAll('option');
-
       // 1 default + 1 PLA with extruder_id=0 (extruder_id=1 is filtered out)
-      expect(options).toHaveLength(2);
-
-      const optionValues = Array.from(options).map((o) => o.getAttribute('value'));
-      expect(optionValues).toContain('PLA|#FF0000');
-      expect(optionValues).not.toContain('PLA|#00FF00');
+      const values = optionValues();
+      expect(values).toHaveLength(2);
+      expect(values).toContain('PLA|#FF0000');
+      expect(values).not.toContain('PLA|#00FF00');
     });
 
     it('shows all filaments when nozzle_id is undefined', () => {
@@ -258,11 +269,8 @@ describe('FilamentOverride', () => {
         />
       );
 
-      const select = screen.getByRole('combobox');
-      const options = select.querySelectorAll('option');
-
-      // 1 default + 2 PLA options (no nozzle filtering)
-      expect(options).toHaveLength(3);
+      // 1 default + 2 PLA rows (no nozzle filtering)
+      expect(optionValues()).toHaveLength(3);
     });
 
     it('includes filaments with null extruder_id', () => {
@@ -287,16 +295,12 @@ describe('FilamentOverride', () => {
         />
       );
 
-      const select = screen.getByRole('combobox');
-      const options = select.querySelectorAll('option');
-
       // 1 default + extruder_id=0 + extruder_id=null (extruder_id=1 filtered out)
-      expect(options).toHaveLength(3);
-
-      const optionValues = Array.from(options).map((o) => o.getAttribute('value'));
-      expect(optionValues).toContain('PLA|#FF0000');
-      expect(optionValues).toContain('PLA|#00FF00');
-      expect(optionValues).not.toContain('PLA|#FFFFFF');
+      const values = optionValues();
+      expect(values).toHaveLength(3);
+      expect(values).toContain('PLA|#FF0000');
+      expect(values).toContain('PLA|#00FF00');
+      expect(values).not.toContain('PLA|#FFFFFF');
     });
   });
 
@@ -311,8 +315,8 @@ describe('FilamentOverride', () => {
         />
       );
 
-      const select = screen.getByRole('combobox');
-      fireEvent.change(select, { target: { value: 'PLA|#00FF00' } });
+      const row = openPicker().find((o) => o.getAttribute('data-value') === 'PLA|#00FF00');
+      fireEvent.click(row as HTMLElement);
 
       expect(mockOnChange).toHaveBeenCalledWith({
         1: { type: 'PLA', color: '#00FF00' },
@@ -333,13 +337,60 @@ describe('FilamentOverride', () => {
         />
       );
 
-      const select = screen.getByRole('combobox');
-      fireEvent.change(select, { target: { value: '' } });
+      const row = openPicker().find((o) => o.getAttribute('data-value') === '');
+      fireEvent.click(row as HTMLElement);
 
       expect(mockOnChange).toHaveBeenCalledWith({});
     });
   });
 
+  describe('colour swatches (#3159)', () => {
+    it('draws the colour of every filament it offers, and of the original', () => {
+      render(
+        <FilamentOverride
+          filamentReqs={defaultFilamentReqs}
+          availableFilaments={defaultAvailable}
+          overrides={{}}
+          onChange={mockOnChange}
+        />
+      );
+
+      const rows = openPicker();
+      // The original-filament row plus the two same-type candidates: model
+      // mode pools across printers, so there is no slot binding behind an
+      // entry and each swatch is the plain tray colour.
+      expect(rows).toHaveLength(3);
+      for (const row of rows) {
+        expect(within(row).getByTestId('filament-swatch')).toBeInTheDocument();
+      }
+    });
+
+    it('prints each candidate hex and marks the one the slice asked for', () => {
+      render(
+        <FilamentOverride
+          filamentReqs={defaultFilamentReqs}
+          availableFilaments={defaultAvailable}
+          overrides={{}}
+          onChange={mockOnChange}
+        />
+      );
+
+      const rows = openPicker();
+      const listbox = screen.getByRole('listbox');
+      expect(within(listbox).getByText('#00FF00')).toBeInTheDocument();
+      // #FF0000 twice: the original-filament row states what the slice asked
+      // for, and one candidate carries it.
+      expect(within(listbox).getAllByText('#FF0000')).toHaveLength(2);
+
+      // The marker belongs on the candidate, not on the original — it answers
+      // "which of these is the colour the slice asked for", which is the
+      // judgement the colour names cannot be trusted to make.
+      const marked = rows.filter((r) => within(r).queryByTitle('Exact colour match'));
+      expect(marked).toHaveLength(1);
+      expect(marked[0].getAttribute('data-value')).toBe('PLA|#FF0000');
+    });
+  });
+
   describe('original-label SKU resolution (#1718)', () => {
     it('uses the builtin filament name when tray_info_idx maps to a known SKU', async () => {
       // Stamped by Bambu Studio when slicing with PLA Matte Charcoal: 3MF
@@ -367,15 +418,11 @@ describe('FilamentOverride', () => {
         />,
       );
 
-      // Wait for the queries to resolve and the resolved label to land in
-      // the dropdown's "original" placeholder option. The tooltip on the
-      // color swatch carries the same text, so we scope to the option to
-      // avoid the multi-match.
-      await waitFor(() => {
-        const select = screen.getByRole('combobox');
-        const placeholder = select.querySelector('option[value=""]');
-        expect(placeholder?.textContent).toMatch(/Bambu PLA Matte/);
-      });
+      // Wait for the queries to resolve and the resolved label to land on the
+      // control, which reads as the "original filament" row while nothing is
+      // overridden. Reading the closed trigger rather than the open list keeps
+      // this clear of the swatch tooltip, which carries the same text.
+      await waitFor(() => expect(triggerText()).toMatch(/Bambu PLA Matte/));
     });
 
     it('prefers the cloud user-preset name over the builtin entry for the same id', async () => {
@@ -405,11 +452,7 @@ describe('FilamentOverride', () => {
         />,
       );
 
-      await waitFor(() => {
-        const select = screen.getByRole('combobox');
-        const placeholder = select.querySelector('option[value=""]');
-        expect(placeholder?.textContent).toMatch(/My House PLA/);
-      });
+      await waitFor(() => expect(triggerText()).toMatch(/My House PLA/));
       // The builtin fallback must NOT bleed through anywhere — neither the
       // placeholder option nor the tooltip.
       expect(screen.queryByText(/Bambu PLA Basic/)).not.toBeInTheDocument();
@@ -452,11 +495,7 @@ describe('FilamentOverride', () => {
         />,
       );
 
-      await waitFor(() => {
-        const select = screen.getByRole('combobox');
-        const placeholder = select.querySelector('option[value=""]');
-        expect(placeholder?.textContent).toMatch(/Bambu PLA Matte \(Charcoal\)/);
-      });
+      await waitFor(() => expect(triggerText()).toMatch(/Bambu PLA Matte \(Charcoal\)/));
     });
 
     it('disambiguates per slot when two slots share a hex but differ in material', async () => {
@@ -497,10 +536,9 @@ describe('FilamentOverride', () => {
       );
 
       await waitFor(() => {
-        const selects = screen.getAllByRole('combobox');
-        expect(selects).toHaveLength(2);
-        expect(selects[0].querySelector('option[value=""]')?.textContent).toMatch(/Bambu PLA Matte \(Charcoal\)/);
-        expect(selects[1].querySelector('option[value=""]')?.textContent).toMatch(/Bambu PLA Basic \(Black\)/);
+        expect(screen.getAllByRole('combobox')).toHaveLength(2);
+        expect(triggerText(0)).toMatch(/Bambu PLA Matte \(Charcoal\)/);
+        expect(triggerText(1)).toMatch(/Bambu PLA Basic \(Black\)/);
       });
     });
 
@@ -536,10 +574,8 @@ describe('FilamentOverride', () => {
       // Wait for the builtin lookup to land so we know the row mounted; the
       // colour fallback to getColorName for #FF0000 produces "Red"-shaped text.
       await waitFor(() => {
-        const select = screen.getByRole('combobox');
-        const placeholder = select.querySelector('option[value=""]');
-        expect(placeholder?.textContent).toMatch(/Bambu PLA Matte/);
-        expect(placeholder?.textContent).not.toMatch(/null/);
+        expect(triggerText()).toMatch(/Bambu PLA Matte/);
+        expect(triggerText()).not.toMatch(/null/);
       });
     });
 
@@ -571,9 +607,7 @@ describe('FilamentOverride', () => {
       await waitFor(() => {
         expect(screen.getByText('(25g)')).toBeInTheDocument();
       });
-      const select = screen.getByRole('combobox');
-      const placeholder = select.querySelector('option[value=""]');
-      expect(placeholder?.textContent).toMatch(/PLA \(/);
+      expect(triggerText()).toMatch(/PLA \(/);
     });
   });
 });
diff --git a/frontend/src/__tests__/components/PrintModal.test.tsx b/frontend/src/__tests__/components/PrintModal.test.tsx
index 3e1a236dc..e87bcebb3 100644
--- a/frontend/src/__tests__/components/PrintModal.test.tsx
+++ b/frontend/src/__tests__/components/PrintModal.test.tsx
@@ -8,7 +8,7 @@
 
 import { describe, it, expect, vi, beforeEach } from 'vitest';
 import type React from 'react';
-import { screen, waitFor, fireEvent, render as rtlRender } from '@testing-library/react';
+import { screen, waitFor, fireEvent, within, render as rtlRender } from '@testing-library/react';
 import userEvent from '@testing-library/user-event';
 import { QueryClient, QueryClientProvider } from '@tanstack/react-query';
 import { BrowserRouter } from 'react-router-dom';
@@ -59,6 +59,32 @@ const createMockQueueItem = (overrides: Partial<PrintQueueItem> = {}): PrintQueu
   ...overrides,
 });
 
+/**
+ * Choose a row in a SlotPicker (#3159).
+ *
+ * The slot and override controls were native `<select>`s until a swatch had to
+ * go next to each choice, which an `<option>` cannot render. They are listboxes
+ * now, so a test picks by opening the control and clicking a row instead of
+ * calling `selectOptions` with a value. `triggerName` matches the control's
+ * aria-label ("Printer slot for …" / "Filament override for …"), which is a
+ * steadier handle than the old "find the select that has an option with this
+ * value".
+ */
+async function pickFromSlotPicker(
+  user: ReturnType<typeof userEvent.setup>,
+  triggerName: RegExp,
+  rowText: RegExp,
+): Promise<void> {
+  const trigger = await waitFor(() => {
+    const found = screen.getAllByRole('combobox', { name: triggerName });
+    if (found.length === 0) throw new Error(`no picker matching ${triggerName}`);
+    return found[0];
+  });
+  await user.click(trigger);
+  const listbox = await screen.findByRole('listbox');
+  await user.click(within(listbox).getByText(rowText));
+}
+
 describe('PrintModal', () => {
   const mockOnClose = vi.fn();
   const mockOnSuccess = vi.fn();
@@ -1778,15 +1804,10 @@ describe('PrintModal — per-plate filament mapping (#2551 follow-up)', () => {
     await waitFor(() => expect(screen.getByText(/Filament Mapping — Plate 1/)).toBeInTheDocument());
 
     // Force plate 1's slot 1 onto the black tray (1) instead of the auto-matched red (0).
+    // A2 is AMS 0 / tray 1, i.e. global tray id 1 — the value the old
+    // `selectOptions(..., '1')` picked.
     await user.click(screen.getByText(/Filament Mapping — Plate 1/));
-    const traySelects = await waitFor(() => {
-      const found = screen.getAllByRole('combobox').filter((el) =>
-        Array.from((el as HTMLSelectElement).options).some((o) => o.value === '1'),
-      );
-      if (found.length === 0) throw new Error('no tray select rendered');
-      return found;
-    });
-    await user.selectOptions(traySelects[0], '1');
+    await pickFromSlotPicker(user, /printer slot for/i, /^A2:/);
 
     // Now move the job to the other printer.
     await user.click(screen.getByText('X1 Carbon')); // deselect
@@ -2347,6 +2368,47 @@ describe('PrintModal — override survives "Any model" -> "Specific Printer" (#3
     await user.click(document.querySelector('button[type="submit"]') as HTMLElement);
   };
 
+  // The slot picker's list is portaled to <body>, outside the dialog's own
+  // DOM, and the dialog closes both on a click outside itself and on Escape.
+  // Either would be a bad regression: picking a slot, or dismissing the list,
+  // would throw away everything typed into the dialog (#3159).
+  it('does not close the dialog when a slot is picked from the portaled list', async () => {
+    const user = userEvent.setup();
+    render(<PrintModal mode="edit-queue-item" archiveId={1} archiveName="Job" queueItem={anyP2SItem()} onClose={mockOnClose} />);
+
+    await moveToPrinter01(user);
+    // The panel is collapsed by default; the picker only exists once open.
+    await user.click(await screen.findByText(/filament mapping/i));
+
+    const trigger = await screen.findByRole('combobox', { name: /printer slot for/i });
+    await user.click(trigger);
+    const listbox = await screen.findByRole('listbox');
+    await user.click(within(listbox).getAllByRole('option')[1]);
+
+    expect(mockOnClose).not.toHaveBeenCalled();
+    expect(screen.getByText(/filament mapping/i)).toBeInTheDocument();
+  });
+
+  it('closes only the slot list on Escape, not the dialog', async () => {
+    const user = userEvent.setup();
+    render(<PrintModal mode="edit-queue-item" archiveId={1} archiveName="Job" queueItem={anyP2SItem()} onClose={mockOnClose} />);
+
+    await moveToPrinter01(user);
+    await user.click(await screen.findByText(/filament mapping/i));
+
+    await user.click(await screen.findByRole('combobox', { name: /printer slot for/i }));
+    await screen.findByRole('listbox');
+    await user.keyboard('{Escape}');
+
+    await waitFor(() => expect(screen.queryByRole('listbox')).not.toBeInTheDocument());
+    expect(mockOnClose).not.toHaveBeenCalled();
+
+    // And a second Escape, with no list open, still closes the dialog — the
+    // picker must not have swallowed the key permanently.
+    await user.keyboard('{Escape}');
+    expect(mockOnClose).toHaveBeenCalled();
+  });
+
   it('matches the chosen printer against the override and keeps it on the item', async () => {
     const user = userEvent.setup();
     render(<PrintModal mode="edit-queue-item" archiveId={1} archiveName="Job" queueItem={anyP2SItem()} onClose={mockOnClose} />);
@@ -2486,14 +2548,13 @@ describe('PrintModal — override survives "Any model" -> "Specific Printer" (#3
       return select as HTMLSelectElement;
     });
     await user.selectOptions(modelSelect, 'P2S');
-    const overrideSelect = await waitFor(() => {
-      const select = screen
-        .getAllByRole('combobox')
-        .find((el) => [...(el as HTMLSelectElement).options].some((o) => o.value === `PLA|${BONE_WHITE}`));
-      if (!select) throw new Error('override select not rendered');
-      return select as HTMLSelectElement;
-    });
-    await user.selectOptions(overrideSelect, `PLA|${BONE_WHITE}`);
+    // Matched on the hex the row now prints (#3159) rather than on the option
+    // value, so the assertion names the colour the user is actually picking.
+    await pickFromSlotPicker(
+      user,
+      /filament override for/i,
+      new RegExp(BONE_WHITE.toUpperCase().replace('#', '#?')),
+    );
 
     await moveToPrinter01(user);
     await waitFor(() => expect(screen.getByText(/filament mapping/i)).toBeInTheDocument());
diff --git a/frontend/src/__tests__/components/PrintModalCrossModel.test.tsx b/frontend/src/__tests__/components/PrintModalCrossModel.test.tsx
index 00ae8e62d..97277257d 100644
--- a/frontend/src/__tests__/components/PrintModalCrossModel.test.tsx
+++ b/frontend/src/__tests__/components/PrintModalCrossModel.test.tsx
@@ -9,7 +9,7 @@
  */
 
 import { describe, it, expect, beforeEach } from 'vitest';
-import { screen, waitFor, fireEvent } from '@testing-library/react';
+import { screen, waitFor, fireEvent, within } from '@testing-library/react';
 import userEvent from '@testing-library/user-event';
 import { http, HttpResponse } from 'msw';
 import { render } from '../utils';
@@ -94,8 +94,14 @@ describe('PrintModal cross-model mode', () => {
 
     // PLA Matte is loaded only on the H2D. It has to be offered anyway: the job
     // can land there, and choosing it simply narrows which candidates match.
+    // The control is a listbox since it gained a swatch per choice (#3159), so
+    // its rows exist only while it is open.
+    const trigger = await screen.findByRole('combobox', { name: /filament override for/i });
+    fireEvent.click(trigger);
     await waitFor(() => {
-      const options = screen.getAllByRole('option').map((o) => o.textContent ?? '');
+      const options = within(screen.getByRole('listbox'))
+        .getAllByRole('option')
+        .map((o) => o.textContent ?? '');
       expect(options.some((o) => o.includes('PLA Matte'))).toBe(true);
       expect(options.some((o) => o.includes('PLA Basic'))).toBe(true);
     });
diff --git a/frontend/src/__tests__/components/SlotPicker.test.tsx b/frontend/src/__tests__/components/SlotPicker.test.tsx
new file mode 100644
index 000000000..c5db054c6
--- /dev/null
+++ b/frontend/src/__tests__/components/SlotPicker.test.tsx
@@ -0,0 +1,183 @@
+/**
+ * Tests for SlotPicker — the filament chooser that replaced the Print /
+ * Schedule dialog's native `<select>`s so each choice can carry its colour
+ * (#3159).
+ *
+ * The point of the control is the swatch, so these pin that a colour is drawn
+ * for every row and for the chosen one; that a slot with no inventory binding
+ * still gets the tray's own colour; and that the keyboard still works, because
+ * the `<select>` this replaced was operable without a mouse and losing that
+ * would be a regression dressed up as a feature.
+ */
+
+import { describe, it, expect, vi } from 'vitest';
+import { screen, within, waitFor } from '@testing-library/react';
+import userEvent from '@testing-library/user-event';
+import { render } from '../utils';
+import { SlotPicker, type SlotPickerOption } from '../../components/PrintModal/SlotPicker';
+import { displayHex } from '../../components/PrintModal/displayHex';
+
+const OPTIONS: SlotPickerOption[] = [
+  {
+    value: '0',
+    label: 'A1: Devil Design PLA Basic (Orange)',
+    meta: ' - 820g left',
+    rgba: '#FEC600',
+    hex: '#FEC600',
+  },
+  {
+    value: '1',
+    // A slot configured on the printer with no inventory spool behind it: the
+    // tray colour is all there is, and it still has to draw.
+    label: 'A2: PLA (Black)',
+    rgba: '#000000',
+    hex: '#000000',
+  },
+  {
+    value: '2',
+    label: 'A3: eSUN PLA Silk (Rainbow)',
+    rgba: '#FF0000',
+    extraColors: '00FF00,0000FF',
+    subtype: 'Multicolor',
+    hex: '#FF0000',
+    exactMatch: true,
+  },
+];
+
+function renderPicker(props: Partial<React.ComponentProps<typeof SlotPicker>> = {}) {
+  const onChange = props.onChange ?? vi.fn();
+  render(
+    <SlotPicker
+      value=""
+      options={OPTIONS}
+      placeholder="-- Select slot --"
+      ariaLabel="Printer slot for PLA"
+      exactMatchLabel="Exact colour match"
+      {...props}
+      onChange={onChange}
+    />,
+  );
+  return { onChange };
+}
+
+async function open(user: ReturnType<typeof userEvent.setup>) {
+  await user.click(screen.getByRole('combobox', { name: /printer slot for pla/i }));
+  return await screen.findByRole('listbox');
+}
+
+describe('displayHex', () => {
+  it('prints six digits for an opaque colour and eight for a see-through one', () => {
+    // Alpha is kept only when it carries information: a Clear filament must
+    // not read as if it were solid, and an opaque spool must not be given a
+    // meaningless "FF" tail.
+    expect(displayHex('#FEC600')).toBe('#FEC600');
+    expect(displayHex('FEC600FF')).toBe('#FEC600');
+    expect(displayHex('#00AAFF80')).toBe('#00AAFF80');
+    expect(displayHex('#00000000')).toBe('#00000000');
+  });
+
+  it('prints nothing rather than something misleading', () => {
+    expect(displayHex(null)).toBeNull();
+    expect(displayHex('')).toBeNull();
+    expect(displayHex('#ABC')).toBeNull();
+    expect(displayHex('not-a-colour')).toBeNull();
+  });
+});
+
+describe('SlotPicker', () => {
+  it('draws a swatch for every offered slot', async () => {
+    const user = userEvent.setup();
+    renderPicker();
+
+    const listbox = await open(user);
+    // One per option. The placeholder has no colour and deliberately draws
+    // nothing rather than a grey swatch, which would read as a grey spool.
+    expect(within(listbox).getAllByTestId('filament-swatch')).toHaveLength(OPTIONS.length);
+  });
+
+  it('draws the chosen slot\'s colour on the closed control', async () => {
+    renderPicker({ value: '1' });
+
+    const trigger = screen.getByRole('combobox', { name: /printer slot for pla/i });
+    const swatch = within(trigger).getByTestId('filament-swatch');
+    expect(swatch).toBeInTheDocument();
+    expect(trigger).toHaveTextContent('A2: PLA (Black)');
+  });
+
+  it('renders a multi-colour spool as a gradient, not its base colour', async () => {
+    const user = userEvent.setup();
+    renderPicker();
+
+    const listbox = await open(user);
+    const rainbow = within(listbox).getByRole('option', { name: /eSUN PLA Silk/ });
+    const swatch = within(rainbow).getByTestId('filament-swatch');
+    // `Multicolor` is what turns the stops into a conic sweep; a slot with no
+    // extra stops would be a flat linear-gradient of one colour.
+    expect(swatch.style.backgroundImage).toContain('conic-gradient');
+    expect(swatch.style.backgroundImage).toContain('#00FF00');
+  });
+
+  it('shows each slot\'s hex and marks the one that matches exactly', async () => {
+    const user = userEvent.setup();
+    renderPicker();
+
+    const listbox = await open(user);
+    expect(within(listbox).getByText('#FEC600')).toBeInTheDocument();
+    // The marker is what answers "is this a real mismatch or two names for the
+    // same hex" without leaving the dialog.
+    const exact = within(listbox).getByTitle('Exact colour match');
+    expect(within(listbox).getByRole('option', { name: /eSUN PLA Silk/ })).toContainElement(exact);
+  });
+
+  it('picks a slot with the keyboard', async () => {
+    const user = userEvent.setup();
+    const { onChange } = renderPicker();
+
+    const trigger = screen.getByRole('combobox', { name: /printer slot for pla/i });
+    trigger.focus();
+    // Row 0 is the placeholder, so two presses land on the second slot.
+    await user.keyboard('{ArrowDown}');
+    await screen.findByRole('listbox');
+    await user.keyboard('{ArrowDown}{ArrowDown}{Enter}');
+
+    expect(onChange).toHaveBeenCalledWith('1');
+    await waitFor(() => expect(screen.queryByRole('listbox')).not.toBeInTheDocument());
+  });
+
+  it('closes on Escape without letting the dialog around it see the key', async () => {
+    const user = userEvent.setup();
+    const onDialogEscape = vi.fn();
+    document.addEventListener('keydown', onDialogEscape);
+    try {
+      renderPicker();
+      await open(user);
+      await user.keyboard('{Escape}');
+
+      await waitFor(() => expect(screen.queryByRole('listbox')).not.toBeInTheDocument());
+      // The picker stops propagation, so a dialog listening for Escape on the
+      // document never sees it and stays open (#3159).
+      expect(onDialogEscape).not.toHaveBeenCalled();
+    } finally {
+      document.removeEventListener('keydown', onDialogEscape);
+    }
+  });
+
+  it('reports the value the caller gave the row, not its position', async () => {
+    const user = userEvent.setup();
+    const { onChange } = renderPicker();
+
+    const listbox = await open(user);
+    await user.click(within(listbox).getByRole('option', { name: /Devil Design/ }));
+    expect(onChange).toHaveBeenCalledWith('0');
+  });
+
+  it('offers the placeholder as a real choice so a slot can be cleared', async () => {
+    const user = userEvent.setup();
+    const { onChange } = renderPicker({ value: '1' });
+
+    await user.click(screen.getByRole('combobox', { name: /printer slot for pla/i }));
+    const listbox = await screen.findByRole('listbox');
+    await user.click(within(listbox).getByRole('option', { name: /Select slot/ }));
+    expect(onChange).toHaveBeenCalledWith('');
+  });
+});
diff --git a/frontend/src/__tests__/hooks/useFilamentMapping.test.ts b/frontend/src/__tests__/hooks/useFilamentMapping.test.ts
index 9b8fc6fa5..2eeb6380f 100644
--- a/frontend/src/__tests__/hooks/useFilamentMapping.test.ts
+++ b/frontend/src/__tests__/hooks/useFilamentMapping.test.ts
@@ -397,6 +397,82 @@ describe('computeAmsMapping', () => {
   });
 });
 
+describe('buildLoadedFilaments - slot colour for the picker (#3159)', () => {
+  it('carries the bound spool\'s extra stops and effect onto the slot', () => {
+    // A tray record holds one hex and nothing else, so a two-tone or glittery
+    // spool would draw as its base colour in the Print dialog's slot picker.
+    // The binding is the only place the rest of the colour exists.
+    const status = createPrinterStatus([
+      { id: 0, tray: [{ id: 0, tray_type: 'PLA', tray_color: 'FF0000', tray_info_idx: 'GFA00' }] },
+    ]);
+    const slotSpools = new Map([
+      [
+        0,
+        {
+          brand: 'eSUN',
+          material: 'PLA',
+          subtype: 'Multicolor',
+          color_name: 'Rainbow',
+          rgba: 'FF0000FF',
+          extra_colors: '00FF00,0000FF',
+          effect_type: null,
+        },
+      ],
+    ]);
+
+    const [slot] = buildLoadedFilaments(status, slotSpools);
+
+    expect(slot).toMatchObject({
+      extraColors: '00FF00,0000FF',
+      spoolSubtype: 'Multicolor',
+      colorName: 'Rainbow',
+    });
+    expect(slot.effectType).toBeUndefined();
+  });
+
+  it('leaves a slot with no binding to its own tray colour', () => {
+    // Configure Slot / set-on-the-printer slots have no inventory spool behind
+    // them. The firmware reports no stops and never will, so the picker draws a
+    // solid swatch -- which is the honest one, not a missing feature.
+    const status = createPrinterStatus([
+      { id: 0, tray: [{ id: 0, tray_type: 'PLA', tray_color: '00AAFFFF', tray_info_idx: 'GFA00' }] },
+    ]);
+
+    const [slot] = buildLoadedFilaments(status);
+
+    expect(slot.color).toBe('#00AAFF');
+    expect(slot.extraColors).toBeUndefined();
+    expect(slot.effectType).toBeUndefined();
+    expect(slot.spoolSubtype).toBeUndefined();
+  });
+
+  it('carries them for the external spool holder too', () => {
+    const status = createPrinterStatus(
+      [],
+      [{ id: 254, tray_type: 'PLA', tray_color: 'AABBCCFF', tray_info_idx: 'GFA00' }] as PrinterStatus['vt_tray'],
+    );
+    const slotSpools = new Map([
+      [
+        254,
+        {
+          brand: 'Devil Design',
+          material: 'PLA',
+          subtype: 'Galaxy',
+          color_name: 'Galaxy Black',
+          rgba: 'AABBCCFF',
+          extra_colors: null,
+          effect_type: 'Glitter',
+        },
+      ],
+    ]);
+
+    const [slot] = buildLoadedFilaments(status, slotSpools);
+
+    expect(slot.effectType).toBe('Glitter');
+    expect(slot.spoolSubtype).toBe('Galaxy');
+  });
+});
+
 describe('buildLoadedFilaments - nozzle awareness', () => {
   it('sets extruderId from ams_extruder_map', () => {
     const status = createPrinterStatus([
diff --git a/frontend/src/api/client.ts b/frontend/src/api/client.ts
index 846010868..1eea42ae4 100644
--- a/frontend/src/api/client.ts
+++ b/frontend/src/api/client.ts
@@ -3730,6 +3730,15 @@ export interface SlotSpoolIdentity {
   subtype: string | null;
   color_name: string | null;
   rgba: string | null;
+  /** Comma-separated hex stops for a multi-colour spool, and the effect
+   *  overlay — the two things a tray record cannot carry, so a slot swatch
+   *  can be drawn the way the inventory row draws it (#3159).
+   *
+   *  Optional rather than required: the backend sends both keys on every
+   *  binding, but a frontend running against an older one gets neither, and
+   *  every reader here already falls back to a solid swatch. */
+  extra_colors?: string | null;
+  effect_type?: string | null;
 }
 
 export interface InventoryRemainResponse {
diff --git a/frontend/src/components/PrintModal/FilamentMapping.tsx b/frontend/src/components/PrintModal/FilamentMapping.tsx
index 4b3b0823c..0042e02a2 100644
--- a/frontend/src/components/PrintModal/FilamentMapping.tsx
+++ b/frontend/src/components/PrintModal/FilamentMapping.tsx
@@ -5,8 +5,10 @@ import { Circle, Check, AlertTriangle, RefreshCw, ChevronDown, ChevronUp, Palett
 import { api } from '../../api/client';
 import type { SlotSpoolIdentity } from '../../api/client';
 import { useFilamentMapping } from '../../hooks/useFilamentMapping';
-import { getGlobalTrayId, effectivePreferLowest, FTS_INLET_SIDE } from '../../utils/amsHelpers';
+import { getGlobalTrayId, effectivePreferLowest, FTS_INLET_SIDE, normalizeColorForCompare } from '../../utils/amsHelpers';
 import { disambiguateColorNames, getColorName } from '../../utils/colors';
+import { SlotPicker } from './SlotPicker';
+import { displayHex } from './displayHex';
 import { useFilamentLabels } from './useFilamentLabels';
 import { autoAssignRackPositions, rackOptionsForGroup } from '../../utils/nozzleRack';
 import type { FilamentMappingProps, RackGroupInfo } from './types';
@@ -490,11 +492,32 @@ export function FilamentMapping({
                 </span>
                 {/* Arrow */}
                 <span className="text-bambu-gray">→</span>
-                {/* Slot selector dropdown */}
-                <select
-                  value={item.loaded?.globalTrayId ?? ''}
-                  onChange={(e) => handleSlotChange(slotId, e.target.value)}
-                  className={`flex-1 px-2 py-1 rounded border text-xs bg-bambu-dark-secondary focus:outline-none focus:ring-1 focus:ring-bambu-green ${
+                {/*
+                  Slot picker. Not a <select>: an <option> renders text only,
+                  and the colour of the slot is the whole point of this row
+                  (#3159) -- colour names come from the catalogue or from hue,
+                  so a third-party beige reads as "Orange" and the mismatch
+                  warning cannot be judged without seeing both swatches.
+
+                  #1722: every loaded slot is offered for every filament row,
+                  regardless of which extruder the slot is wired to. Before that
+                  change a slot was only listed when its extruder matched the
+                  filament's slicer-assigned nozzle (item.nozzle_id), which
+                  locked users out of cross-extruder picks even when they'd
+                  intentionally loaded the required filament into the "other"
+                  AMS. The L/R badge on the filament row still tells the user
+                  what the slicer planned; the picker trusts the user to pick
+                  based on their physical setup. Printer firmware accepts or
+                  rejects the ams_mapping at start-print -- failure is loud,
+                  not silent.
+                */}
+                <SlotPicker
+                  value={item.loaded?.globalTrayId != null ? String(item.loaded.globalTrayId) : ''}
+                  onChange={(next) => handleSlotChange(slotId, next)}
+                  placeholder={`-- ${t('printModal.selectSlot')} --`}
+                  ariaLabel={t('printModal.slotForFilament', { name: resolvedName })}
+                  exactMatchLabel={t('printModal.exactColorMatch')}
+                  className={`${
                     item.status === 'match'
                       ? 'border-bambu-green/50 text-bambu-green'
                       : item.status === 'type_only'
@@ -502,24 +525,7 @@ export function FilamentMapping({
                       : 'border-orange-500 dark:border-orange-400/50 text-orange-700 dark:text-orange-400'
                   } ${item.isManual ? 'ring-1 ring-blue-400/50' : ''}`}
                   title={item.isManual ? t('printModal.manuallySelected') : t('printModal.autoMatched')}
-                >
-                  <option value="" className="bg-bambu-dark text-bambu-gray">
-                    -- {t('printModal.selectSlot')} --
-                  </option>
-                  {/*
-                    #1722: every loaded slot is offered for every filament row,
-                    regardless of which extruder the slot is wired to. Before this
-                    change a slot was only listed when its extruder matched the
-                    filament's slicer-assigned nozzle (item.nozzle_id), which
-                    locked users out of cross-extruder picks even when they'd
-                    intentionally loaded the required filament into the "other"
-                    AMS. The L/R badge on the filament row still tells the user
-                    what the slicer planned; the dropdown now trusts the user to
-                    pick based on their physical setup. Printer firmware accepts
-                    or rejects the ams_mapping at start-print — failure is loud,
-                    not silent.
-                  */}
-                  {loadedFilaments.map((f) => {
+                  options={loadedFilaments.map((f) => {
                       const remainingWeight = trayRemainingWeightMap.get(f.globalTrayId);
                       const remainingLabel = remainingWeight != null
                         ? t('printModal.slotRemainingShort', {
@@ -536,13 +542,24 @@ export function FilamentMapping({
                       // two views agree. Not translated: L and R are the letters on
                       // the machine.
                       const ftsBadge = ftsInlet == null ? '' : ` [${FTS_INLET_SIDE[ftsInlet]}]`;
-                      return (
-                        <option key={f.globalTrayId} value={f.globalTrayId} className="bg-bambu-dark text-white">
-                          {f.label}: {f.spoolName || f.traySubBrands || f.type} ({f.colorName}){remainingLabel}{ftsBadge}
-                        </option>
-                      );
+                      return {
+                        value: String(f.globalTrayId),
+                        label: `${f.label}: ${f.spoolName || f.traySubBrands || f.type} (${f.colorName})`,
+                        meta: `${remainingLabel}${ftsBadge}`,
+                        rgba: f.color,
+                        extraColors: f.extraColors,
+                        effectType: f.effectType,
+                        subtype: f.spoolSubtype,
+                        hex: displayHex(f.color),
+                        // The hex the slice asked for, against the hex the
+                        // printer reports -- the comparison the colour names
+                        // cannot be trusted to make.
+                        exactMatch:
+                          normalizeColorForCompare(item.color) !== '' &&
+                          normalizeColorForCompare(f.color) === normalizeColorForCompare(item.color),
+                      };
                   })}
-                </select>
+                />
                 {/* Status icon */}
                 {item.status === 'match' ? (
                   <Check className="w-3 h-3 text-bambu-green" />
diff --git a/frontend/src/components/PrintModal/FilamentOverride.tsx b/frontend/src/components/PrintModal/FilamentOverride.tsx
index 47d5fbfd6..106859f06 100644
--- a/frontend/src/components/PrintModal/FilamentOverride.tsx
+++ b/frontend/src/components/PrintModal/FilamentOverride.tsx
@@ -2,7 +2,9 @@ import { useMemo } from 'react';
 import { useTranslation } from 'react-i18next';
 import { Circle, RotateCcw, Palette } from 'lucide-react';
 import { getColorName } from '../../utils/colors';
-import { canonicalFilamentType } from '../../utils/amsHelpers';
+import { canonicalFilamentType, normalizeColorForCompare } from '../../utils/amsHelpers';
+import { SlotPicker } from './SlotPicker';
+import { displayHex } from './displayHex';
 import { useFilamentLabels } from './useFilamentLabels';
 import type { FilamentReqsData } from './types';
 
@@ -123,30 +125,42 @@ export function FilamentOverride({
                 </span>
                 {/* Arrow */}
                 <span className="text-bambu-gray">→</span>
-                {/* Override dropdown — only compatible (same-type) filaments */}
-                <select
+                {/* Override picker — only compatible (same-type) filaments.
+                    Carries a swatch for the same reason the mapping row does
+                    (#3159): this is the model-mode half of the same choice,
+                    and leaving it text-only would make the two paths read
+                    differently for one decision. Model mode pools filaments
+                    across every printer of the model, so there is no slot
+                    binding behind an entry and the swatch is the plain tray
+                    colour -- solid, with no multi-colour stops to draw. */}
+                <SlotPicker
                   value={isOverridden ? `${override.type}|${override.color}` : ''}
-                  onChange={(e) => handleChange(req.slot_id, e.target.value)}
+                  onChange={(next) => handleChange(req.slot_id, next)}
+                  placeholder={`${t('printModal.originalFilament')}: ${resolvedName} (${colorLabel})`}
+                  placeholderOption={{ rgba: req.color, hex: displayHex(req.color) }}
                   disabled={compatible.length === 0}
-                  className={`flex-1 px-2 py-1 rounded border text-xs bg-bambu-dark-secondary focus:outline-none focus:ring-1 focus:ring-bambu-green ${
+                  ariaLabel={t('printModal.overrideForFilament', { name: resolvedName })}
+                  exactMatchLabel={t('printModal.exactColorMatch')}
+                  className={
                     isOverridden
                       ? 'border-blue-500/50 dark:border-blue-400/50 text-blue-700 dark:text-blue-400'
                       : 'border-bambu-gray/30 text-bambu-gray'
-                  }`}
-                >
-                  <option value="" className="bg-bambu-dark text-bambu-gray">
-                    {t('printModal.originalFilament')}: {resolvedName} ({colorLabel})
-                  </option>
-                  {compatible.map((f, idx) => (
-                    <option
-                    key={`${f.type}-${f.color}-${f.tray_sub_brands}-${idx}`}
-                      value={`${f.type}|${f.color}`}
-                      className="bg-bambu-dark text-white"
-                    >
-                    {f.tray_sub_brands || f.type} ({getColorName(f.color, f.tray_sub_brands)})
-                    </option>
-                  ))}
-                </select>
+                  }
+                  options={compatible.map((f, idx) => ({
+                    // The value has to stay `TYPE|COLOR` -- `handleChange`
+                    // parses it -- but two spools of the same type and colour
+                    // on different printers collapse to one value, so the key
+                    // keeps the sub-brand and the index as it did before.
+                    value: `${f.type}|${f.color}`,
+                    key: `${f.type}-${f.color}-${f.tray_sub_brands}-${idx}`,
+                    label: `${f.tray_sub_brands || f.type} (${getColorName(f.color, f.tray_sub_brands)})`,
+                    rgba: f.color,
+                    hex: displayHex(f.color),
+                    exactMatch:
+                      normalizeColorForCompare(req.color) !== '' &&
+                      normalizeColorForCompare(f.color) === normalizeColorForCompare(req.color),
+                  }))}
+                />
                 {/* Reset button */}
                 {isOverridden ? (
                   <button
diff --git a/frontend/src/components/PrintModal/SlotPicker.tsx b/frontend/src/components/PrintModal/SlotPicker.tsx
new file mode 100644
index 000000000..5415464c3
--- /dev/null
+++ b/frontend/src/components/PrintModal/SlotPicker.tsx
@@ -0,0 +1,302 @@
+import { useCallback, useEffect, useLayoutEffect, useRef, useState } from 'react';
+import { createPortal } from 'react-dom';
+import { ChevronDown, Check } from 'lucide-react';
+import { FilamentSwatch } from '../FilamentSwatch';
+
+/**
+ * One-line filament picker that can show a colour, which a `<select>` cannot.
+ *
+ * The Print / Schedule dialog is where the slicer's colour is compared against
+ * what is actually in the machine, and until now the right-hand side of that
+ * comparison was text only (#3159). Colour names are not a substitute: they are
+ * resolved from the Color Catalog or from hue, so a third-party beige reads as
+ * "Orange" and a "Color mismatch" warning gives no way to tell a real mismatch
+ * from two names for the same hex. `<option>` renders text and nothing else, so
+ * the swatch means this cannot be a native select.
+ *
+ * What is kept from the select it replaces: full keyboard operation (arrows,
+ * Home/End, Enter, Escape), `role="listbox"` semantics, and the caller's own
+ * border colouring, which encodes match / type-only / mismatch on the mapping
+ * row and overridden / original on the override row.
+ *
+ * Deliberately not a shared "Select": the rows are a swatch, a name, a hex and
+ * a badge, and this is the second such control in the app after
+ * `spool-form/PresetPicker` — which documents the same reasoning. A shared
+ * abstraction over two call sites with different row shapes would be guessing
+ * at the third.
+ */
+
+export interface SlotPickerOption {
+  /** The value handed back to `onChange`; mirrors the old `<option value>`. */
+  value: string;
+  /** Main text of the row. */
+  label: string;
+  /** RRGGBBAA (or RRGGBB) without `#`. Absent renders no swatch at all rather
+   *  than a grey one, so "no colour known" never looks like a grey spool. */
+  rgba?: string | null;
+  /** Comma-separated extra hex stops for a multi-colour spool. */
+  extraColors?: string | null;
+  /** Effect overlay name, as `FilamentSwatch` understands it. */
+  effectType?: string | null;
+  /** Filament subtype; `Multicolor` renders the stops as a conic sweep. */
+  subtype?: string | null;
+  /** Muted suffix after the label — remaining grams, FTS inlet badge. */
+  meta?: string;
+  /** Shown in the dropdown row so two similar colours can be told apart by
+   *  their hex rather than by two names that resolved the same way. */
+  hex?: string | null;
+  /** Marks the row whose colour is exactly the one the slice asked for. */
+  exactMatch?: boolean;
+  /** React key, when `value` is not unique. Model-mode pools filaments across
+   *  every printer of a model, so two spools of the same type and colour
+   *  collapse to one `TYPE|COLOR` value while still being two rows. */
+  key?: string;
+}
+
+interface SlotPickerProps {
+  /** Currently chosen option value, or '' for the placeholder row. */
+  value: string;
+  options: SlotPickerOption[];
+  /** What the '' row reads as. */
+  placeholder: string;
+  /** Colour for the '' row, when it has one (the override panel's '' row is
+   *  the 3MF's own filament, which does have a colour). */
+  placeholderOption?: Omit<SlotPickerOption, 'value' | 'label'>;
+  onChange: (value: string) => void;
+  disabled?: boolean;
+  ariaLabel: string;
+  /** Native tooltip on the trigger. */
+  title?: string;
+  /** Border / text classes the caller uses to encode status. */
+  className?: string;
+  /** Tooltip for the exact-match marker. */
+  exactMatchLabel?: string;
+}
+
+const SWATCH_CLASS = 'w-3 h-3';
+
+export function SlotPicker({
+  value,
+  options,
+  placeholder,
+  placeholderOption,
+  onChange,
+  disabled = false,
+  ariaLabel,
+  title,
+  className = '',
+  exactMatchLabel,
+}: SlotPickerProps) {
+  const [open, setOpen] = useState(false);
+  const [activeIndex, setActiveIndex] = useState(0);
+  const [coords, setCoords] = useState<{ top: number; left: number; width: number } | null>(null);
+  const triggerRef = useRef<HTMLButtonElement>(null);
+  const listRef = useRef<HTMLDivElement>(null);
+
+  // The placeholder is row 0, so an index addresses both it and the options
+  // with one number — which is what the arrow keys and aria-activedescendant
+  // need.
+  const rows: SlotPickerOption[] = [
+    { ...(placeholderOption ?? {}), value: '', label: placeholder },
+    ...options,
+  ];
+  const selectedIndex = Math.max(
+    0,
+    rows.findIndex((r) => r.value === value),
+  );
+  const selected = rows[selectedIndex];
+
+  const place = useCallback(() => {
+    const el = triggerRef.current;
+    if (!el) return;
+    const rect = el.getBoundingClientRect();
+    // Flip above when the row sits low enough that a downward list would run
+    // off the viewport. The dialog body scrolls, so a mapping row near its
+    // bottom is the ordinary case, not the edge one.
+    const below = window.innerHeight - rect.bottom;
+    const height = Math.min(listRef.current?.scrollHeight ?? 0, 240);
+    const flip = below < height + 8 && rect.top > below;
+    setCoords({
+      top: flip ? Math.max(8, rect.top - height - 4) : rect.bottom + 4,
+      left: rect.left,
+      width: rect.width,
+    });
+  }, []);
+
+  useLayoutEffect(() => {
+    if (open) place();
+  }, [open, place]);
+
+  useEffect(() => {
+    if (!open) return;
+    const onPointerDown = (e: MouseEvent) => {
+      const target = e.target as Node;
+      if (triggerRef.current?.contains(target) || listRef.current?.contains(target)) return;
+      setOpen(false);
+    };
+    // Escape closes this control WITHOUT closing the dialog around it, which a
+    // bare document listener would otherwise let happen — same guard
+    // `PresetPicker` documents.
+    const onKeyDown = (e: KeyboardEvent) => {
+      if (e.key !== 'Escape') return;
+      e.stopPropagation();
+      setOpen(false);
+      triggerRef.current?.focus();
+    };
+    // The list is portaled to <body>, so it does not travel with the dialog's
+    // own scroll container: follow it rather than leaving it behind.
+    const reposition = () => place();
+    document.addEventListener('mousedown', onPointerDown);
+    document.addEventListener('keydown', onKeyDown, true);
+    window.addEventListener('scroll', reposition, true);
+    window.addEventListener('resize', reposition);
+    return () => {
+      document.removeEventListener('mousedown', onPointerDown);
+      document.removeEventListener('keydown', onKeyDown, true);
+      window.removeEventListener('scroll', reposition, true);
+      window.removeEventListener('resize', reposition);
+    };
+  }, [open, place]);
+
+  const choose = (index: number) => {
+    onChange(rows[index].value);
+    setOpen(false);
+    triggerRef.current?.focus();
+  };
+
+  const openAt = (index: number) => {
+    setActiveIndex(index);
+    setOpen(true);
+  };
+
+  const handleTriggerKey = (e: React.KeyboardEvent) => {
+    if (disabled) return;
+    if (!open) {
+      if (e.key === 'ArrowDown' || e.key === 'ArrowUp' || e.key === 'Enter' || e.key === ' ') {
+        e.preventDefault();
+        openAt(selectedIndex);
+      }
+      return;
+    }
+    if (e.key === 'ArrowDown') {
+      e.preventDefault();
+      setActiveIndex((i) => Math.min(rows.length - 1, i + 1));
+    } else if (e.key === 'ArrowUp') {
+      e.preventDefault();
+      setActiveIndex((i) => Math.max(0, i - 1));
+    } else if (e.key === 'Home') {
+      e.preventDefault();
+      setActiveIndex(0);
+    } else if (e.key === 'End') {
+      e.preventDefault();
+      setActiveIndex(rows.length - 1);
+    } else if (e.key === 'Enter' || e.key === ' ') {
+      e.preventDefault();
+      choose(activeIndex);
+    } else if (e.key === 'Tab') {
+      setOpen(false);
+    }
+  };
+
+  const listId = `slot-picker-${ariaLabel.replace(/\W+/g, '-')}`;
+
+  const renderSwatch = (row: SlotPickerOption) =>
+    row.rgba ? (
+      <FilamentSwatch
+        rgba={row.rgba}
+        extraColors={row.extraColors}
+        effectType={row.effectType}
+        subtype={row.subtype}
+        className={SWATCH_CLASS}
+        effectSize="table"
+      />
+    ) : null;
+
+  return (
+    <>
+      <button
+        ref={triggerRef}
+        type="button"
+        role="combobox"
+        aria-label={ariaLabel}
+        aria-haspopup="listbox"
+        aria-expanded={open}
+        aria-controls={open ? listId : undefined}
+        // On the combobox, not on the listbox: focus stays on the trigger
+        // while the list is open, and this is what tells a screen reader which
+        // row the arrow keys are on.
+        aria-activedescendant={open ? `${listId}-${activeIndex}` : undefined}
+        disabled={disabled}
+        title={title}
+        onClick={() => (open ? setOpen(false) : openAt(selectedIndex))}
+        onKeyDown={handleTriggerKey}
+        className={`flex-1 min-w-0 flex items-center gap-1.5 px-2 py-1 rounded border text-xs bg-bambu-dark-secondary text-left focus:outline-none focus:ring-1 focus:ring-bambu-green disabled:opacity-50 ${className}`}
+      >
+        {renderSwatch(selected)}
+        <span className="flex-1 min-w-0 truncate">
+          {selected.label}
+          {selected.meta ? <span className="text-bambu-gray">{selected.meta}</span> : null}
+        </span>
+        <ChevronDown className="w-3 h-3 shrink-0 opacity-70" />
+      </button>
+
+      {open &&
+        createPortal(
+          <div
+            ref={listRef}
+            id={listId}
+            role="listbox"
+            aria-label={ariaLabel}
+            className="fixed z-[60] max-h-60 overflow-y-auto rounded-lg border border-bambu-dark-tertiary bg-bambu-dark-secondary p-1 shadow-xl"
+            style={{
+              top: coords?.top ?? -9999,
+              left: coords?.left ?? -9999,
+              width: coords?.width,
+              // Hide until placed, so there is no flash at (-9999,-9999) —
+              // same trick FilamentHoverCard uses.
+              visibility: coords ? 'visible' : 'hidden',
+            }}
+          >
+            {rows.map((row, index) => (
+              <button
+                key={row.key ?? `${row.value}-${index}`}
+                id={`${listId}-${index}`}
+                type="button"
+                role="option"
+                // What `<option value>` carried before this was a listbox: the
+                // identity of the choice, separate from how it reads.
+                data-value={row.value}
+                aria-selected={index === selectedIndex}
+                onMouseEnter={() => setActiveIndex(index)}
+                onClick={() => choose(index)}
+                className={`w-full flex items-center gap-1.5 text-left px-2 py-1.5 rounded-md text-xs ${
+                  index === selectedIndex
+                    ? 'bg-bambu-green/15 text-bambu-green'
+                    : index === activeIndex
+                      ? 'bg-bambu-dark text-white'
+                      : 'text-white'
+                }`}
+              >
+                {renderSwatch(row)}
+                <span className="flex-1 min-w-0 truncate" title={row.label}>
+                  {row.label}
+                  {row.meta ? <span className="text-bambu-gray">{row.meta}</span> : null}
+                </span>
+                {row.hex ? (
+                  <span className="shrink-0 font-mono text-[10px] uppercase text-bambu-gray">{row.hex}</span>
+                ) : null}
+                {row.exactMatch ? (
+                  <span title={exactMatchLabel} className="shrink-0 text-bambu-green">
+                    <Check className="w-3 h-3" />
+                  </span>
+                ) : null}
+              </button>
+            ))}
+          </div>,
+          document.body,
+        )}
+    </>
+  );
+}
+
+export default SlotPicker;
diff --git a/frontend/src/components/PrintModal/displayHex.ts b/frontend/src/components/PrintModal/displayHex.ts
new file mode 100644
index 000000000..79a147f36
--- /dev/null
+++ b/frontend/src/components/PrintModal/displayHex.ts
@@ -0,0 +1,19 @@
+/**
+ * The hex to print next to a swatch in the slot picker (#3159).
+ *
+ * Shown because two slots whose colour names resolved the same way -- both
+ * "Orange", one a beige -- are otherwise indistinguishable in the list, and
+ * comparing them against the slice's colour is the reason the picker exists.
+ *
+ * Alpha is kept only when it carries information: a translucent spool prints
+ * all eight digits, an opaque one prints six, so a Clear filament is not shown
+ * as if it were solid. Returns null for anything unreadable, and the caller
+ * then prints no hex rather than a misleading one.
+ */
+export function displayHex(color: string | null | undefined): string | null {
+  if (!color) return null;
+  const clean = color.trim().replace(/^#/, '');
+  if (!/^[0-9a-fA-F]{6}([0-9a-fA-F]{2})?$/.test(clean)) return null;
+  const keepAlpha = clean.length === 8 && clean.substring(6, 8).toLowerCase() !== 'ff';
+  return `#${(keepAlpha ? clean : clean.substring(0, 6)).toUpperCase()}`;
+}
diff --git a/frontend/src/hooks/useFilamentMapping.ts b/frontend/src/hooks/useFilamentMapping.ts
index 27433691c..39538486c 100644
--- a/frontend/src/hooks/useFilamentMapping.ts
+++ b/frontend/src/hooks/useFilamentMapping.ts
@@ -85,6 +85,9 @@ export function buildLoadedFilaments(
           trayInfoIdx: tray.tray_info_idx || '',
           traySubBrands: tray.tray_sub_brands || '',
           spoolName: spoolDisplayName(identity) ?? undefined,
+          extraColors: identity?.extra_colors ?? undefined,
+          effectType: identity?.effect_type ?? undefined,
+          spoolSubtype: identity?.subtype ?? undefined,
           extruderId: amsExtruderMap?.[String(amsUnit.id)],
           remain: tray.remain ?? -1,
         });
@@ -114,6 +117,9 @@ export function buildLoadedFilaments(
         trayInfoIdx: extTray.tray_info_idx || '',
         traySubBrands: extTray.tray_sub_brands || '',
         spoolName: spoolDisplayName(identity) ?? undefined,
+        extraColors: identity?.extra_colors ?? undefined,
+        effectType: identity?.effect_type ?? undefined,
+        spoolSubtype: identity?.subtype ?? undefined,
         extruderId: hasDualNozzle ? (255 - trayId) : undefined,
         remain: extTray.remain ?? -1,
       });
@@ -184,6 +190,16 @@ export interface LoadedFilament {
   extruderId?: number;
   /** Remaining filament percentage (0-100), -1 = unknown */
   remain: number;
+  /** The bound spool's remaining colour stops and effect overlay, when the
+   *  slot has a binding (#3159). Display only, like `spoolName`: a tray record
+   *  carries one hex, so without these a two-tone spool draws as its base
+   *  colour. Absent for a slot configured on the printer -- the firmware has
+   *  nothing to report, and a solid swatch is then the honest one. */
+  extraColors?: string;
+  effectType?: string;
+  /** The bound spool's subtype ("PLA Silk", "Multicolor"), which decides
+   *  whether the swatch renders its stops as a conic sweep. */
+  spoolSubtype?: string;
 }
 
 /**
diff --git a/frontend/src/i18n/locales/de.ts b/frontend/src/i18n/locales/de.ts
index 67c9bac5c..ebc49c0ff 100644
--- a/frontend/src/i18n/locales/de.ts
+++ b/frontend/src/i18n/locales/de.ts
@@ -5034,6 +5034,9 @@ export default {
     manuallySelected: 'Manuell ausgewählt',
     autoMatched: 'Automatisch zugeordnet',
     selectSlot: 'Slot wählen',
+    exactColorMatch: 'Exakte Farbübereinstimmung',
+    slotForFilament: 'Drucker-Slot für {{name}}',
+    overrideForFilament: 'Filament-Überschreibung für {{name}}',
     sameTypeDifferentColorDetail: 'Gleicher Typ, andere Farbe: benötigt {{required}}, im Slot ist {{loaded}}',
     requiredTypeNotInPrinter: 'Benötigter Filamenttyp im Drucker nicht gefunden.',
     whenToPrint: 'Wann drucken',
diff --git a/frontend/src/i18n/locales/en.ts b/frontend/src/i18n/locales/en.ts
index e80008d31..fc06ecc5c 100644
--- a/frontend/src/i18n/locales/en.ts
+++ b/frontend/src/i18n/locales/en.ts
@@ -5079,6 +5079,9 @@ export default {
     manuallySelected: 'Manually selected',
     autoMatched: 'Auto-matched',
     selectSlot: 'Select slot',
+    exactColorMatch: 'Exact colour match',
+    slotForFilament: 'Printer slot for {{name}}',
+    overrideForFilament: 'Filament override for {{name}}',
     sameTypeDifferentColorDetail: 'Same type, different color: needs {{required}}, slot has {{loaded}}',
     requiredTypeNotInPrinter: 'Required filament type not found in printer.',
     whenToPrint: 'When to print',
diff --git a/frontend/src/i18n/locales/es.ts b/frontend/src/i18n/locales/es.ts
index 2d614e65b..7a742344e 100644
--- a/frontend/src/i18n/locales/es.ts
+++ b/frontend/src/i18n/locales/es.ts
@@ -5041,6 +5041,9 @@ export default {
     manuallySelected: 'Seleccionado manualmente',
     autoMatched: 'Emparejado automáticamente',
     selectSlot: 'Elegir ranura',
+    exactColorMatch: 'Coincidencia exacta de color',
+    slotForFilament: 'Ranura de impresora para {{name}}',
+    overrideForFilament: 'Anulación de filamento para {{name}}',
     sameTypeDifferentColorDetail: 'Mismo tipo, color distinto: necesita {{required}}, la ranura tiene {{loaded}}',
     requiredTypeNotInPrinter: 'El tipo de filamento requerido no se encuentra en la impresora.',
     whenToPrint: 'Cuándo imprimir',
diff --git a/frontend/src/i18n/locales/fr.ts b/frontend/src/i18n/locales/fr.ts
index 45442817a..5480478e7 100644
--- a/frontend/src/i18n/locales/fr.ts
+++ b/frontend/src/i18n/locales/fr.ts
@@ -5023,6 +5023,9 @@ export default {
     manuallySelected: 'Sélectionné manuellement',
     autoMatched: 'Associé automatiquement',
     selectSlot: 'Choisir un emplacement',
+    exactColorMatch: 'Correspondance exacte des couleurs',
+    slotForFilament: 'Emplacement imprimante pour {{name}}',
+    overrideForFilament: 'Remplacement de filament pour {{name}}',
     sameTypeDifferentColorDetail: 'Même type, couleur différente : requiert {{required}}, l’emplacement contient {{loaded}}',
     requiredTypeNotInPrinter: 'Type de filament requis introuvable dans l’imprimante.',
     whenToPrint: 'Quand imprimer',
diff --git a/frontend/src/i18n/locales/it.ts b/frontend/src/i18n/locales/it.ts
index 19c3e5190..ac496cf21 100644
--- a/frontend/src/i18n/locales/it.ts
+++ b/frontend/src/i18n/locales/it.ts
@@ -5022,6 +5022,9 @@ export default {
     manuallySelected: 'Selezionato manualmente',
     autoMatched: 'Abbinato automaticamente',
     selectSlot: 'Scegli slot',
+    exactColorMatch: 'Corrispondenza esatta del colore',
+    slotForFilament: 'Slot stampante per {{name}}',
+    overrideForFilament: 'Sostituzione filamento per {{name}}',
     sameTypeDifferentColorDetail: 'Stesso tipo, colore diverso: richiede {{required}}, lo slot ha {{loaded}}',
     requiredTypeNotInPrinter: 'Tipo di filamento richiesto non trovato nella stampante.',
     whenToPrint: 'Quando stampare',
diff --git a/frontend/src/i18n/locales/ja.ts b/frontend/src/i18n/locales/ja.ts
index 2d65adaa0..370b61644 100644
--- a/frontend/src/i18n/locales/ja.ts
+++ b/frontend/src/i18n/locales/ja.ts
@@ -5034,6 +5034,9 @@ export default {
     manuallySelected: '手動で選択',
     autoMatched: '自動で一致',
     selectSlot: 'スロットを選択',
+    exactColorMatch: '色が完全に一致',
+    slotForFilament: '{{name}} のプリンタースロット',
+    overrideForFilament: '{{name}} のフィラメントオーバーライド',
     sameTypeDifferentColorDetail: '同じ種類、異なる色: 必要な色は {{required}}、スロットは {{loaded}}',
     requiredTypeNotInPrinter: '必要なフィラメントタイプがプリンターに見つかりません。',
     whenToPrint: '印刷タイミング',
diff --git a/frontend/src/i18n/locales/ko.ts b/frontend/src/i18n/locales/ko.ts
index 6e22c3e6f..7469a1c1e 100644
--- a/frontend/src/i18n/locales/ko.ts
+++ b/frontend/src/i18n/locales/ko.ts
@@ -4804,6 +4804,9 @@ export default {
     manuallySelected: '수동으로 선택됨',
     autoMatched: '자동으로 일치됨',
     selectSlot: '슬롯 선택',
+    exactColorMatch: '색상 정확히 일치',
+    slotForFilament: '{{name}}의 프린터 슬롯',
+    overrideForFilament: '{{name}}의 필라멘트 재정의',
     sameTypeDifferentColorDetail: '같은 유형, 다른 색상: {{required}} 필요, 슬롯에는 {{loaded}}',
     requiredTypeNotInPrinter: '필요한 필라멘트 유형을 프린터에서 찾을 수 없습니다.',
     whenToPrint: '인쇄 시점',
diff --git a/frontend/src/i18n/locales/nl.ts b/frontend/src/i18n/locales/nl.ts
index 51e12e00d..81744d078 100644
--- a/frontend/src/i18n/locales/nl.ts
+++ b/frontend/src/i18n/locales/nl.ts
@@ -5079,6 +5079,9 @@ export default {
     manuallySelected: 'Handmatig geselecteerd',
     autoMatched: 'Automatisch gekoppeld',
     selectSlot: 'Sleuf selecteren',
+    exactColorMatch: 'Exacte kleurovereenkomst',
+    slotForFilament: 'Printersleuf voor {{name}}',
+    overrideForFilament: 'Filament overschrijven voor {{name}}',
     sameTypeDifferentColorDetail: 'Zelfde type, andere kleur: vereist {{required}}, sleuf bevat {{loaded}}',
     requiredTypeNotInPrinter: 'Vereist filamenttype niet gevonden in printer.',
     whenToPrint: 'Wanneer afdrukken',
diff --git a/frontend/src/i18n/locales/pt-BR.ts b/frontend/src/i18n/locales/pt-BR.ts
index 829f354f7..d1383c4d3 100644
--- a/frontend/src/i18n/locales/pt-BR.ts
+++ b/frontend/src/i18n/locales/pt-BR.ts
@@ -5022,6 +5022,9 @@ export default {
     manuallySelected: 'Selecionado manualmente',
     autoMatched: 'Correspondido automaticamente',
     selectSlot: 'Escolher slot',
+    exactColorMatch: 'Correspondência exata de cor',
+    slotForFilament: 'Slot da impressora para {{name}}',
+    overrideForFilament: 'Substituição de filamento para {{name}}',
     sameTypeDifferentColorDetail: 'Mesmo tipo, cor diferente: precisa de {{required}}, o slot tem {{loaded}}',
     requiredTypeNotInPrinter: 'Tipo de filamento necessário não encontrado na impressora.',
     whenToPrint: 'Quando imprimir',
diff --git a/frontend/src/i18n/locales/ru.ts b/frontend/src/i18n/locales/ru.ts
index e6fe22b62..1e42f9d64 100644
--- a/frontend/src/i18n/locales/ru.ts
+++ b/frontend/src/i18n/locales/ru.ts
@@ -4793,6 +4793,9 @@ export default {
     manuallySelected: "Выбрано вручную",
     autoMatched: "Подобрано автоматически",
     selectSlot: "Выбрать слот",
+    exactColorMatch: "Точное совпадение цвета",
+    slotForFilament: "Слот принтера для {{name}}",
+    overrideForFilament: "Переопределение филамента для {{name}}",
     sameTypeDifferentColorDetail: "Тот же тип, другой цвет: нужен {{required}}, в слоте {{loaded}}",
     requiredTypeNotInPrinter: "Требуемый тип филамента не найден в принтере.",
     whenToPrint: "Когда печатать",
diff --git a/frontend/src/i18n/locales/sv.ts b/frontend/src/i18n/locales/sv.ts
index 47b5da2b9..f28959a11 100644
--- a/frontend/src/i18n/locales/sv.ts
+++ b/frontend/src/i18n/locales/sv.ts
@@ -5079,6 +5079,9 @@ errors: {
     manuallySelected: 'Manuellt vald',
     autoMatched: 'Auto-matchad',
     selectSlot: 'Välj fack',
+    exactColorMatch: 'Exakt färgmatchning',
+    slotForFilament: 'Skrivarfack för {{name}}',
+    overrideForFilament: 'Åsidosätt filament för {{name}}',
     sameTypeDifferentColorDetail: 'Samma typ, annan färg: behöver {{required}}, facket har {{loaded}}',
     requiredTypeNotInPrinter: 'Krävd filamenttyp hittades inte i skrivaren.',
     whenToPrint: 'När utskriften ska starta',
diff --git a/frontend/src/i18n/locales/tr.ts b/frontend/src/i18n/locales/tr.ts
index adc133a82..690396056 100644
--- a/frontend/src/i18n/locales/tr.ts
+++ b/frontend/src/i18n/locales/tr.ts
@@ -5011,6 +5011,9 @@ export default {
     manuallySelected: 'Elle seçildi',
     autoMatched: 'Otomatik eşleşti',
     selectSlot: 'Yuva seç',
+    exactColorMatch: 'Tam renk eşleşmesi',
+    slotForFilament: '{{name}} için yazıcı yuvası',
+    overrideForFilament: '{{name}} için filament geçersiz kılma',
     sameTypeDifferentColorDetail: 'Aynı tür, farklı renk: {{required}} gerekiyor, yuvada {{loaded}} var',
     requiredTypeNotInPrinter: 'Gereken filament türü yazıcıda bulunamadı.',
     whenToPrint: 'Ne zaman yazdırılsın',
diff --git a/frontend/src/i18n/locales/uk.ts b/frontend/src/i18n/locales/uk.ts
index fe3c2f70c..cf81ed5ce 100644
--- a/frontend/src/i18n/locales/uk.ts
+++ b/frontend/src/i18n/locales/uk.ts
@@ -5076,6 +5076,9 @@ export default {
     manuallySelected: "Вибрано вручну",
     autoMatched: "Підібрано автоматично",
     selectSlot: "Вибрати слот",
+    exactColorMatch: "Точний збіг кольору",
+    slotForFilament: "Слот принтера для {{name}}",
+    overrideForFilament: "Перевизначення філаменту для {{name}}",
     sameTypeDifferentColorDetail: "Того самого типу, іншого кольору: потрібен {{required}}, у слоті {{loaded}}",
     requiredTypeNotInPrinter: "Потрібний тип філаменту не знайдено у принтері.",
     whenToPrint: "Коли друкувати",
diff --git a/frontend/src/i18n/locales/zh-CN.ts b/frontend/src/i18n/locales/zh-CN.ts
index 7e3350f55..125e15e0e 100644
--- a/frontend/src/i18n/locales/zh-CN.ts
+++ b/frontend/src/i18n/locales/zh-CN.ts
@@ -5022,6 +5022,9 @@ export default {
     manuallySelected: '手动选择',
     autoMatched: '自动匹配',
     selectSlot: '选择槽位',
+    exactColorMatch: '颜色完全匹配',
+    slotForFilament: '{{name}} 的打印机槽位',
+    overrideForFilament: '{{name}} 的耗材覆盖',
     sameTypeDifferentColorDetail: '相同类型，不同颜色：需要 {{required}}，槽位为 {{loaded}}',
     requiredTypeNotInPrinter: '打印机中未找到所需的耗材类型。',
     whenToPrint: '何时打印',
diff --git a/frontend/src/i18n/locales/zh-TW.ts b/frontend/src/i18n/locales/zh-TW.ts
index 33910c38d..af37d8640 100644
--- a/frontend/src/i18n/locales/zh-TW.ts
+++ b/frontend/src/i18n/locales/zh-TW.ts
@@ -5022,6 +5022,9 @@ export default {
     manuallySelected: '手動選擇',
     autoMatched: '自動比對',
     selectSlot: '選擇插槽',
+    exactColorMatch: '顏色完全相符',
+    slotForFilament: '{{name}} 的印表機插槽',
+    overrideForFilament: '{{name}} 的耗材覆蓋',
     sameTypeDifferentColorDetail: '相同類型，不同顏色：需要 {{required}}，插槽為 {{loaded}}',
     requiredTypeNotInPrinter: '印表機中找不到所需的耗材類型。',
     whenToPrint: '何時列印',
diff --git a/static/assets/index-CN5d-0KI.js b/static/assets/index-CCYi0XHi.js
similarity index 88%
rename from static/assets/index-CN5d-0KI.js
rename to static/assets/index-CCYi0XHi.js
index 68dd86951..51cc93ce5 100644
--- a/static/assets/index-CN5d-0KI.js
+++ b/static/assets/index-CCYi0XHi.js
@@ -6,49 +6,49 @@ var e=Object.create,t=Object.defineProperty,n=Object.getOwnPropertyDescriptor,r=
 `+c[r].replace(` at new `,` at `);return e.displayName&&u.includes(`<anonymous>`)&&(u=u.replace(`<anonymous>`,e.displayName)),u}while(1<=r&&0<=i);break}}}finally{fe=!1,Error.prepareStackTrace=n}return(n=e?e.displayName||e.name:``)?de(n):``}function me(e,t){switch(e.tag){case 26:case 27:case 5:return de(e.type);case 16:return de(`Lazy`);case 13:return e.child!==t&&t!==null?de(`Suspense Fallback`):de(`Suspense`);case 19:return de(`SuspenseList`);case 0:case 15:return pe(e.type,!1);case 11:return pe(e.type.render,!1);case 1:return pe(e.type,!0);case 31:return de(`Activity`);default:return``}}function he(e){try{var t=``,n=null;do t+=me(e,n),n=e,e=e.return;while(e);return t}catch(e){return`
 Error generating stack: `+e.message+`
 `+e.stack}}var ge=Object.prototype.hasOwnProperty,_e=t.unstable_scheduleCallback,ve=t.unstable_cancelCallback,ye=t.unstable_shouldYield,be=t.unstable_requestPaint,xe=t.unstable_now,Se=t.unstable_getCurrentPriorityLevel,Ce=t.unstable_ImmediatePriority,we=t.unstable_UserBlockingPriority,Te=t.unstable_NormalPriority,Ee=t.unstable_LowPriority,De=t.unstable_IdlePriority,Oe=t.log,ke=t.unstable_setDisableYieldValue,Ae=null,je=null;function Me(e){if(typeof Oe==`function`&&ke(e),je&&typeof je.setStrictMode==`function`)try{je.setStrictMode(Ae,e)}catch{}}var Ne=Math.clz32?Math.clz32:Ie,Pe=Math.log,Fe=Math.LN2;function Ie(e){return e>>>=0,e===0?32:31-(Pe(e)/Fe|0)|0}var Le=256,Re=262144,ze=4194304;function Be(e){var t=e&42;if(t!==0)return t;switch(e&-e){case 1:return 1;case 2:return 2;case 4:return 4;case 8:return 8;case 16:return 16;case 32:return 32;case 64:return 64;case 128:return 128;case 256:case 512:case 1024:case 2048:case 4096:case 8192:case 16384:case 32768:case 65536:case 131072:return e&261888;case 262144:case 524288:case 1048576:case 2097152:return e&3932160;case 4194304:case 8388608:case 16777216:case 33554432:return e&62914560;case 67108864:return 67108864;case 134217728:return 134217728;case 268435456:return 268435456;case 536870912:return 536870912;case 1073741824:return 0;default:return e}}function Ve(e,t,n){var r=e.pendingLanes;if(r===0)return 0;var i=0,a=e.suspendedLanes,o=e.pingedLanes;e=e.warmLanes;var s=r&134217727;return s===0?(s=r&~a,s===0?o===0?n||(n=r&~e,n!==0&&(i=Be(n))):i=Be(o):i=Be(s)):(r=s&~a,r===0?(o&=s,o===0?n||(n=s&~e,n!==0&&(i=Be(n))):i=Be(o)):i=Be(r)),i===0?0:t!==0&&t!==i&&(t&a)===0&&(a=i&-i,n=t&-t,a>=n||a===32&&n&4194048)?t:i}function He(e,t){return(e.pendingLanes&~(e.suspendedLanes&~e.pingedLanes)&t)===0}function Ue(e,t){switch(e){case 1:case 2:case 4:case 8:case 64:return t+250;case 16:case 32:case 128:case 256:case 512:case 1024:case 2048:case 4096:case 8192:case 16384:case 32768:case 65536:case 131072:case 262144:case 524288:case 1048576:case 2097152:return t+5e3;case 4194304:case 8388608:case 16777216:case 33554432:return-1;case 67108864:case 134217728:case 268435456:case 536870912:case 1073741824:return-1;default:return-1}}function We(){var e=ze;return ze<<=1,!(ze&62914560)&&(ze=4194304),e}function Ge(e){for(var t=[],n=0;31>n;n++)t.push(e);return t}function Ke(e,t){e.pendingLanes|=t,t!==268435456&&(e.suspendedLanes=0,e.pingedLanes=0,e.warmLanes=0)}function qe(e,t,n,r,i,a){var o=e.pendingLanes;e.pendingLanes=n,e.suspendedLanes=0,e.pingedLanes=0,e.warmLanes=0,e.expiredLanes&=n,e.entangledLanes&=n,e.errorRecoveryDisabledLanes&=n,e.shellSuspendCounter=0;var s=e.entanglements,c=e.expirationTimes,l=e.hiddenUpdates;for(n=o&~n;0<n;){var u=31-Ne(n),d=1<<u;s[u]=0,c[u]=-1;var f=l[u];if(f!==null)for(l[u]=null,u=0;u<f.length;u++){var p=f[u];p!==null&&(p.lane&=-536870913)}n&=~d}r!==0&&Je(e,r,0),a!==0&&i===0&&e.tag!==0&&(e.suspendedLanes|=a&~(o&~t))}function Je(e,t,n){e.pendingLanes|=t,e.suspendedLanes&=~t;var r=31-Ne(t);e.entangledLanes|=t,e.entanglements[r]=e.entanglements[r]|1073741824|n&261930}function Ye(e,t){var n=e.entangledLanes|=t;for(e=e.entanglements;n;){var r=31-Ne(n),i=1<<r;i&t|e[r]&t&&(e[r]|=t),n&=~i}}function Xe(e,t){var n=t&-t;return n=n&42?1:Ze(n),(n&(e.suspendedLanes|t))===0?n:0}function Ze(e){switch(e){case 2:e=1;break;case 8:e=4;break;case 32:e=16;break;case 256:case 512:case 1024:case 2048:case 4096:case 8192:case 16384:case 32768:case 65536:case 131072:case 262144:case 524288:case 1048576:case 2097152:case 4194304:case 8388608:case 16777216:case 33554432:e=128;break;case 268435456:e=134217728;break;default:e=0}return e}function Qe(e){return e&=-e,2<e?8<e?e&134217727?32:268435456:8:2}function $e(){var e=L.p;return e===0?(e=window.event,e===void 0?32:pp(e.type)):e}function et(e,t){var n=L.p;try{return L.p=e,t()}finally{L.p=n}}var U=Math.random().toString(36).slice(2),tt=`__reactFiber$`+U,nt=`__reactProps$`+U,rt=`__reactContainer$`+U,it=`__reactEvents$`+U,at=`__reactListeners$`+U,ot=`__reactHandles$`+U,st=`__reactResources$`+U,ct=`__reactMarker$`+U;function lt(e){delete e[tt],delete e[nt],delete e[it],delete e[at],delete e[ot]}function ut(e){var t=e[tt];if(t)return t;for(var n=e.parentNode;n;){if(t=n[rt]||n[tt]){if(n=t.alternate,t.child!==null||n!==null&&n.child!==null)for(e=df(e);e!==null;){if(n=e[tt])return n;e=df(e)}return t}e=n,n=e.parentNode}return null}function dt(e){if(e=e[tt]||e[rt]){var t=e.tag;if(t===5||t===6||t===13||t===31||t===26||t===27||t===3)return e}return null}function ft(e){var t=e.tag;if(t===5||t===26||t===27||t===6)return e.stateNode;throw Error(i(33))}function pt(e){var t=e[st];return t||=e[st]={hoistableStyles:new Map,hoistableScripts:new Map},t}function mt(e){e[ct]=!0}var ht=new Set,gt={};function _t(e,t){vt(e,t),vt(e+`Capture`,t)}function vt(e,t){for(gt[e]=t,e=0;e<t.length;e++)ht.add(t[e])}var yt=RegExp(`^[:A-Z_a-z\\u00C0-\\u00D6\\u00D8-\\u00F6\\u00F8-\\u02FF\\u0370-\\u037D\\u037F-\\u1FFF\\u200C-\\u200D\\u2070-\\u218F\\u2C00-\\u2FEF\\u3001-\\uD7FF\\uF900-\\uFDCF\\uFDF0-\\uFFFD][:A-Z_a-z\\u00C0-\\u00D6\\u00D8-\\u00F6\\u00F8-\\u02FF\\u0370-\\u037D\\u037F-\\u1FFF\\u200C-\\u200D\\u2070-\\u218F\\u2C00-\\u2FEF\\u3001-\\uD7FF\\uF900-\\uFDCF\\uFDF0-\\uFFFD\\-.0-9\\u00B7\\u0300-\\u036F\\u203F-\\u2040]*$`),bt={},xt={};function St(e){return ge.call(xt,e)?!0:ge.call(bt,e)?!1:yt.test(e)?xt[e]=!0:(bt[e]=!0,!1)}function Ct(e,t,n){if(St(t))if(n===null)e.removeAttribute(t);else{switch(typeof n){case`undefined`:case`function`:case`symbol`:e.removeAttribute(t);return;case`boolean`:var r=t.toLowerCase().slice(0,5);if(r!==`data-`&&r!==`aria-`){e.removeAttribute(t);return}}e.setAttribute(t,``+n)}}function wt(e,t,n){if(n===null)e.removeAttribute(t);else{switch(typeof n){case`undefined`:case`function`:case`symbol`:case`boolean`:e.removeAttribute(t);return}e.setAttribute(t,``+n)}}function Tt(e,t,n,r){if(r===null)e.removeAttribute(n);else{switch(typeof r){case`undefined`:case`function`:case`symbol`:case`boolean`:e.removeAttribute(n);return}e.setAttributeNS(t,n,``+r)}}function Et(e){switch(typeof e){case`bigint`:case`boolean`:case`number`:case`string`:case`undefined`:return e;case`object`:return e;default:return``}}function Dt(e){var t=e.type;return(e=e.nodeName)&&e.toLowerCase()===`input`&&(t===`checkbox`||t===`radio`)}function Ot(e,t,n){var r=Object.getOwnPropertyDescriptor(e.constructor.prototype,t);if(!e.hasOwnProperty(t)&&r!==void 0&&typeof r.get==`function`&&typeof r.set==`function`){var i=r.get,a=r.set;return Object.defineProperty(e,t,{configurable:!0,get:function(){return i.call(this)},set:function(e){n=``+e,a.call(this,e)}}),Object.defineProperty(e,t,{enumerable:r.enumerable}),{getValue:function(){return n},setValue:function(e){n=``+e},stopTracking:function(){e._valueTracker=null,delete e[t]}}}}function kt(e){if(!e._valueTracker){var t=Dt(e)?`checked`:`value`;e._valueTracker=Ot(e,t,``+e[t])}}function At(e){if(!e)return!1;var t=e._valueTracker;if(!t)return!0;var n=t.getValue(),r=``;return e&&(r=Dt(e)?e.checked?`true`:`false`:e.value),e=r,e===n?!1:(t.setValue(e),!0)}function jt(e){if(e||=typeof document<`u`?document:void 0,e===void 0)return null;try{return e.activeElement||e.body}catch{return e.body}}var Mt=/[\n"\\]/g;function Nt(e){return e.replace(Mt,function(e){return`\\`+e.charCodeAt(0).toString(16)+` `})}function Pt(e,t,n,r,i,a,o,s){e.name=``,o!=null&&typeof o!=`function`&&typeof o!=`symbol`&&typeof o!=`boolean`?e.type=o:e.removeAttribute(`type`),t==null?o!==`submit`&&o!==`reset`||e.removeAttribute(`value`):o===`number`?(t===0&&e.value===``||e.value!=t)&&(e.value=``+Et(t)):e.value!==``+Et(t)&&(e.value=``+Et(t)),t==null?n==null?r!=null&&e.removeAttribute(`value`):It(e,o,Et(n)):It(e,o,Et(t)),i==null&&a!=null&&(e.defaultChecked=!!a),i!=null&&(e.checked=i&&typeof i!=`function`&&typeof i!=`symbol`),s!=null&&typeof s!=`function`&&typeof s!=`symbol`&&typeof s!=`boolean`?e.name=``+Et(s):e.removeAttribute(`name`)}function Ft(e,t,n,r,i,a,o,s){if(a!=null&&typeof a!=`function`&&typeof a!=`symbol`&&typeof a!=`boolean`&&(e.type=a),t!=null||n!=null){if(!(a!==`submit`&&a!==`reset`||t!=null)){kt(e);return}n=n==null?``:``+Et(n),t=t==null?n:``+Et(t),s||t===e.value||(e.value=t),e.defaultValue=t}r??=i,r=typeof r!=`function`&&typeof r!=`symbol`&&!!r,e.checked=s?e.checked:!!r,e.defaultChecked=!!r,o!=null&&typeof o!=`function`&&typeof o!=`symbol`&&typeof o!=`boolean`&&(e.name=o),kt(e)}function It(e,t,n){t===`number`&&jt(e.ownerDocument)===e||e.defaultValue===``+n||(e.defaultValue=``+n)}function Lt(e,t,n,r){if(e=e.options,t){t={};for(var i=0;i<n.length;i++)t[`$`+n[i]]=!0;for(n=0;n<e.length;n++)i=t.hasOwnProperty(`$`+e[n].value),e[n].selected!==i&&(e[n].selected=i),i&&r&&(e[n].defaultSelected=!0)}else{for(n=``+Et(n),t=null,i=0;i<e.length;i++){if(e[i].value===n){e[i].selected=!0,r&&(e[i].defaultSelected=!0);return}t!==null||e[i].disabled||(t=e[i])}t!==null&&(t.selected=!0)}}function Rt(e,t,n){if(t!=null&&(t=``+Et(t),t!==e.value&&(e.value=t),n==null)){e.defaultValue!==t&&(e.defaultValue=t);return}e.defaultValue=n==null?``:``+Et(n)}function zt(e,t,n,r){if(t==null){if(r!=null){if(n!=null)throw Error(i(92));if(F(r)){if(1<r.length)throw Error(i(93));r=r[0]}n=r}n??=``,t=n}n=Et(t),e.defaultValue=n,r=e.textContent,r===n&&r!==``&&r!==null&&(e.value=r),kt(e)}function Bt(e,t){if(t){var n=e.firstChild;if(n&&n===e.lastChild&&n.nodeType===3){n.nodeValue=t;return}}e.textContent=t}var Vt=new Set(`animationIterationCount aspectRatio borderImageOutset borderImageSlice borderImageWidth boxFlex boxFlexGroup boxOrdinalGroup columnCount columns flex flexGrow flexPositive flexShrink flexNegative flexOrder gridArea gridRow gridRowEnd gridRowSpan gridRowStart gridColumn gridColumnEnd gridColumnSpan gridColumnStart fontWeight lineClamp lineHeight opacity order orphans scale tabSize widows zIndex zoom fillOpacity floodOpacity stopOpacity strokeDasharray strokeDashoffset strokeMiterlimit strokeOpacity strokeWidth MozAnimationIterationCount MozBoxFlex MozBoxFlexGroup MozLineClamp msAnimationIterationCount msFlex msZoom msFlexGrow msFlexNegative msFlexOrder msFlexPositive msFlexShrink msGridColumn msGridColumnSpan msGridRow msGridRowSpan WebkitAnimationIterationCount WebkitBoxFlex WebKitBoxFlexGroup WebkitBoxOrdinalGroup WebkitColumnCount WebkitColumns WebkitFlex WebkitFlexGrow WebkitFlexPositive WebkitFlexShrink WebkitLineClamp`.split(` `));function Ht(e,t,n){var r=t.indexOf(`--`)===0;n==null||typeof n==`boolean`||n===``?r?e.setProperty(t,``):t===`float`?e.cssFloat=``:e[t]=``:r?e.setProperty(t,n):typeof n!=`number`||n===0||Vt.has(t)?t===`float`?e.cssFloat=n:e[t]=(``+n).trim():e[t]=n+`px`}function Ut(e,t,n){if(t!=null&&typeof t!=`object`)throw Error(i(62));if(e=e.style,n!=null){for(var r in n)!n.hasOwnProperty(r)||t!=null&&t.hasOwnProperty(r)||(r.indexOf(`--`)===0?e.setProperty(r,``):r===`float`?e.cssFloat=``:e[r]=``);for(var a in t)r=t[a],t.hasOwnProperty(a)&&n[a]!==r&&Ht(e,a,r)}else for(var o in t)t.hasOwnProperty(o)&&Ht(e,o,t[o])}function Wt(e){if(e.indexOf(`-`)===-1)return!1;switch(e){case`annotation-xml`:case`color-profile`:case`font-face`:case`font-face-src`:case`font-face-uri`:case`font-face-format`:case`font-face-name`:case`missing-glyph`:return!1;default:return!0}}var Gt=new Map([[`acceptCharset`,`accept-charset`],[`htmlFor`,`for`],[`httpEquiv`,`http-equiv`],[`crossOrigin`,`crossorigin`],[`accentHeight`,`accent-height`],[`alignmentBaseline`,`alignment-baseline`],[`arabicForm`,`arabic-form`],[`baselineShift`,`baseline-shift`],[`capHeight`,`cap-height`],[`clipPath`,`clip-path`],[`clipRule`,`clip-rule`],[`colorInterpolation`,`color-interpolation`],[`colorInterpolationFilters`,`color-interpolation-filters`],[`colorProfile`,`color-profile`],[`colorRendering`,`color-rendering`],[`dominantBaseline`,`dominant-baseline`],[`enableBackground`,`enable-background`],[`fillOpacity`,`fill-opacity`],[`fillRule`,`fill-rule`],[`floodColor`,`flood-color`],[`floodOpacity`,`flood-opacity`],[`fontFamily`,`font-family`],[`fontSize`,`font-size`],[`fontSizeAdjust`,`font-size-adjust`],[`fontStretch`,`font-stretch`],[`fontStyle`,`font-style`],[`fontVariant`,`font-variant`],[`fontWeight`,`font-weight`],[`glyphName`,`glyph-name`],[`glyphOrientationHorizontal`,`glyph-orientation-horizontal`],[`glyphOrientationVertical`,`glyph-orientation-vertical`],[`horizAdvX`,`horiz-adv-x`],[`horizOriginX`,`horiz-origin-x`],[`imageRendering`,`image-rendering`],[`letterSpacing`,`letter-spacing`],[`lightingColor`,`lighting-color`],[`markerEnd`,`marker-end`],[`markerMid`,`marker-mid`],[`markerStart`,`marker-start`],[`overlinePosition`,`overline-position`],[`overlineThickness`,`overline-thickness`],[`paintOrder`,`paint-order`],[`panose-1`,`panose-1`],[`pointerEvents`,`pointer-events`],[`renderingIntent`,`rendering-intent`],[`shapeRendering`,`shape-rendering`],[`stopColor`,`stop-color`],[`stopOpacity`,`stop-opacity`],[`strikethroughPosition`,`strikethrough-position`],[`strikethroughThickness`,`strikethrough-thickness`],[`strokeDasharray`,`stroke-dasharray`],[`strokeDashoffset`,`stroke-dashoffset`],[`strokeLinecap`,`stroke-linecap`],[`strokeLinejoin`,`stroke-linejoin`],[`strokeMiterlimit`,`stroke-miterlimit`],[`strokeOpacity`,`stroke-opacity`],[`strokeWidth`,`stroke-width`],[`textAnchor`,`text-anchor`],[`textDecoration`,`text-decoration`],[`textRendering`,`text-rendering`],[`transformOrigin`,`transform-origin`],[`underlinePosition`,`underline-position`],[`underlineThickness`,`underline-thickness`],[`unicodeBidi`,`unicode-bidi`],[`unicodeRange`,`unicode-range`],[`unitsPerEm`,`units-per-em`],[`vAlphabetic`,`v-alphabetic`],[`vHanging`,`v-hanging`],[`vIdeographic`,`v-ideographic`],[`vMathematical`,`v-mathematical`],[`vectorEffect`,`vector-effect`],[`vertAdvY`,`vert-adv-y`],[`vertOriginX`,`vert-origin-x`],[`vertOriginY`,`vert-origin-y`],[`wordSpacing`,`word-spacing`],[`writingMode`,`writing-mode`],[`xmlnsXlink`,`xmlns:xlink`],[`xHeight`,`x-height`]]),Kt=/^[\u0000-\u001F ]*j[\r\n\t]*a[\r\n\t]*v[\r\n\t]*a[\r\n\t]*s[\r\n\t]*c[\r\n\t]*r[\r\n\t]*i[\r\n\t]*p[\r\n\t]*t[\r\n\t]*:/i;function qt(e){return Kt.test(``+e)?`javascript:throw new Error('React has blocked a javascript: URL as a security precaution.')`:e}function Jt(){}var Yt=null;function Xt(e){return e=e.target||e.srcElement||window,e.correspondingUseElement&&(e=e.correspondingUseElement),e.nodeType===3?e.parentNode:e}var Zt=null,Qt=null;function $t(e){var t=dt(e);if(t&&(e=t.stateNode)){var n=e[nt]||null;a:switch(e=t.stateNode,t.type){case`input`:if(Pt(e,n.value,n.defaultValue,n.defaultValue,n.checked,n.defaultChecked,n.type,n.name),t=n.name,n.type===`radio`&&t!=null){for(n=e;n.parentNode;)n=n.parentNode;for(n=n.querySelectorAll(`input[name="`+Nt(``+t)+`"][type="radio"]`),t=0;t<n.length;t++){var r=n[t];if(r!==e&&r.form===e.form){var a=r[nt]||null;if(!a)throw Error(i(90));Pt(r,a.value,a.defaultValue,a.defaultValue,a.checked,a.defaultChecked,a.type,a.name)}}for(t=0;t<n.length;t++)r=n[t],r.form===e.form&&At(r)}break a;case`textarea`:Rt(e,n.value,n.defaultValue);break a;case`select`:t=n.value,t!=null&&Lt(e,!!n.multiple,t,!1)}}}var en=!1;function tn(e,t,n){if(en)return e(t,n);en=!0;try{return e(t)}finally{if(en=!1,(Zt!==null||Qt!==null)&&(xu(),Zt&&(t=Zt,e=Qt,Qt=Zt=null,$t(t),e)))for(t=0;t<e.length;t++)$t(e[t])}}function W(e,t){var n=e.stateNode;if(n===null)return null;var r=n[nt]||null;if(r===null)return null;n=r[t];a:switch(t){case`onClick`:case`onClickCapture`:case`onDoubleClick`:case`onDoubleClickCapture`:case`onMouseDown`:case`onMouseDownCapture`:case`onMouseMove`:case`onMouseMoveCapture`:case`onMouseUp`:case`onMouseUpCapture`:case`onMouseEnter`:(r=!r.disabled)||(e=e.type,r=!(e===`button`||e===`input`||e===`select`||e===`textarea`)),e=!r;break a;default:e=!1}if(e)return null;if(n&&typeof n!=`function`)throw Error(i(231,t,typeof n));return n}var nn=!(typeof window>`u`||window.document===void 0||window.document.createElement===void 0),rn=!1;if(nn)try{var an={};Object.defineProperty(an,"passive",{get:function(){rn=!0}}),window.addEventListener(`test`,an,an),window.removeEventListener(`test`,an,an)}catch{rn=!1}var on=null,sn=null,cn=null;function ln(){if(cn)return cn;var e,t=sn,n=t.length,r,i=`value`in on?on.value:on.textContent,a=i.length;for(e=0;e<n&&t[e]===i[e];e++);var o=n-e;for(r=1;r<=o&&t[n-r]===i[a-r];r++);return cn=i.slice(e,1<r?1-r:void 0)}function un(e){var t=e.keyCode;return`charCode`in e?(e=e.charCode,e===0&&t===13&&(e=13)):e=t,e===10&&(e=13),32<=e||e===13?e:0}function dn(){return!0}function fn(){return!1}function pn(e){function t(t,n,r,i,a){for(var o in this._reactName=t,this._targetInst=r,this.type=n,this.nativeEvent=i,this.target=a,this.currentTarget=null,e)e.hasOwnProperty(o)&&(t=e[o],this[o]=t?t(i):i[o]);return this.isDefaultPrevented=(i.defaultPrevented==null?!1===i.returnValue:i.defaultPrevented)?dn:fn,this.isPropagationStopped=fn,this}return p(t.prototype,{preventDefault:function(){this.defaultPrevented=!0;var e=this.nativeEvent;e&&(e.preventDefault?e.preventDefault():typeof e.returnValue!=`unknown`&&(e.returnValue=!1),this.isDefaultPrevented=dn)},stopPropagation:function(){var e=this.nativeEvent;e&&(e.stopPropagation?e.stopPropagation():typeof e.cancelBubble!=`unknown`&&(e.cancelBubble=!0),this.isPropagationStopped=dn)},persist:function(){},isPersistent:dn}),t}var mn={eventPhase:0,bubbles:0,cancelable:0,timeStamp:function(e){return e.timeStamp||Date.now()},defaultPrevented:0,isTrusted:0},hn=pn(mn),gn=p({},mn,{view:0,detail:0}),_n=pn(gn),vn,yn,bn,xn=p({},gn,{screenX:0,screenY:0,clientX:0,clientY:0,pageX:0,pageY:0,ctrlKey:0,shiftKey:0,altKey:0,metaKey:0,getModifierState:Mn,button:0,buttons:0,relatedTarget:function(e){return e.relatedTarget===void 0?e.fromElement===e.srcElement?e.toElement:e.fromElement:e.relatedTarget},movementX:function(e){return`movementX`in e?e.movementX:(e!==bn&&(bn&&e.type===`mousemove`?(vn=e.screenX-bn.screenX,yn=e.screenY-bn.screenY):yn=vn=0,bn=e),vn)},movementY:function(e){return`movementY`in e?e.movementY:yn}}),Sn=pn(xn),Cn=pn(p({},xn,{dataTransfer:0})),wn=pn(p({},gn,{relatedTarget:0})),Tn=pn(p({},mn,{animationName:0,elapsedTime:0,pseudoElement:0})),En=pn(p({},mn,{clipboardData:function(e){return`clipboardData`in e?e.clipboardData:window.clipboardData}})),Dn=pn(p({},mn,{data:0})),On={Esc:`Escape`,Spacebar:` `,Left:`ArrowLeft`,Up:`ArrowUp`,Right:`ArrowRight`,Down:`ArrowDown`,Del:`Delete`,Win:`OS`,Menu:`ContextMenu`,Apps:`ContextMenu`,Scroll:`ScrollLock`,MozPrintableKey:`Unidentified`},kn={8:`Backspace`,9:`Tab`,12:`Clear`,13:`Enter`,16:`Shift`,17:`Control`,18:`Alt`,19:`Pause`,20:`CapsLock`,27:`Escape`,32:` `,33:`PageUp`,34:`PageDown`,35:`End`,36:`Home`,37:`ArrowLeft`,38:`ArrowUp`,39:`ArrowRight`,40:`ArrowDown`,45:`Insert`,46:`Delete`,112:`F1`,113:`F2`,114:`F3`,115:`F4`,116:`F5`,117:`F6`,118:`F7`,119:`F8`,120:`F9`,121:`F10`,122:`F11`,123:`F12`,144:`NumLock`,145:`ScrollLock`,224:`Meta`},An={Alt:`altKey`,Control:`ctrlKey`,Meta:`metaKey`,Shift:`shiftKey`};function jn(e){var t=this.nativeEvent;return t.getModifierState?t.getModifierState(e):(e=An[e])?!!t[e]:!1}function Mn(){return jn}var Nn=pn(p({},gn,{key:function(e){if(e.key){var t=On[e.key]||e.key;if(t!==`Unidentified`)return t}return e.type===`keypress`?(e=un(e),e===13?`Enter`:String.fromCharCode(e)):e.type===`keydown`||e.type===`keyup`?kn[e.keyCode]||`Unidentified`:``},code:0,location:0,ctrlKey:0,shiftKey:0,altKey:0,metaKey:0,repeat:0,locale:0,getModifierState:Mn,charCode:function(e){return e.type===`keypress`?un(e):0},keyCode:function(e){return e.type===`keydown`||e.type===`keyup`?e.keyCode:0},which:function(e){return e.type===`keypress`?un(e):e.type===`keydown`||e.type===`keyup`?e.keyCode:0}})),Pn=pn(p({},xn,{pointerId:0,width:0,height:0,pressure:0,tangentialPressure:0,tiltX:0,tiltY:0,twist:0,pointerType:0,isPrimary:0})),Fn=pn(p({},gn,{touches:0,targetTouches:0,changedTouches:0,altKey:0,metaKey:0,ctrlKey:0,shiftKey:0,getModifierState:Mn})),In=pn(p({},mn,{propertyName:0,elapsedTime:0,pseudoElement:0})),Ln=pn(p({},xn,{deltaX:function(e){return`deltaX`in e?e.deltaX:`wheelDeltaX`in e?-e.wheelDeltaX:0},deltaY:function(e){return`deltaY`in e?e.deltaY:`wheelDeltaY`in e?-e.wheelDeltaY:`wheelDelta`in e?-e.wheelDelta:0},deltaZ:0,deltaMode:0})),Rn=pn(p({},mn,{newState:0,oldState:0})),zn=[9,13,27,32],Bn=nn&&`CompositionEvent`in window,Vn=null;nn&&`documentMode`in document&&(Vn=document.documentMode);var Hn=nn&&`TextEvent`in window&&!Vn,Un=nn&&(!Bn||Vn&&8<Vn&&11>=Vn),Wn=` `,Gn=!1;function Kn(e,t){switch(e){case`keyup`:return zn.indexOf(t.keyCode)!==-1;case`keydown`:return t.keyCode!==229;case`keypress`:case`mousedown`:case`focusout`:return!0;default:return!1}}function qn(e){return e=e.detail,typeof e==`object`&&`data`in e?e.data:null}var Jn=!1;function Yn(e,t){switch(e){case`compositionend`:return qn(t);case`keypress`:return t.which===32?(Gn=!0,Wn):null;case`textInput`:return e=t.data,e===Wn&&Gn?null:e;default:return null}}function Xn(e,t){if(Jn)return e===`compositionend`||!Bn&&Kn(e,t)?(e=ln(),cn=sn=on=null,Jn=!1,e):null;switch(e){case`paste`:return null;case`keypress`:if(!(t.ctrlKey||t.altKey||t.metaKey)||t.ctrlKey&&t.altKey){if(t.char&&1<t.char.length)return t.char;if(t.which)return String.fromCharCode(t.which)}return null;case`compositionend`:return Un&&t.locale!==`ko`?null:t.data;default:return null}}var Zn={color:!0,date:!0,datetime:!0,"datetime-local":!0,email:!0,month:!0,number:!0,password:!0,range:!0,search:!0,tel:!0,text:!0,time:!0,url:!0,week:!0};function Qn(e){var t=e&&e.nodeName&&e.nodeName.toLowerCase();return t===`input`?!!Zn[e.type]:t===`textarea`}function $n(e,t,n,r){Zt?Qt?Qt.push(r):Qt=[r]:Zt=r,t=Dd(t,`onChange`),0<t.length&&(n=new hn(`onChange`,`change`,null,n,r),e.push({event:n,listeners:t}))}var er=null,tr=null;function nr(e){bd(e,0)}function rr(e){if(At(ft(e)))return e}function ir(e,t){if(e===`change`)return t}var ar=!1;if(nn){var or;if(nn){var sr=`oninput`in document;if(!sr){var cr=document.createElement(`div`);cr.setAttribute(`oninput`,`return;`),sr=typeof cr.oninput==`function`}or=sr}else or=!1;ar=or&&(!document.documentMode||9<document.documentMode)}function lr(){er&&(er.detachEvent(`onpropertychange`,ur),tr=er=null)}function ur(e){if(e.propertyName===`value`&&rr(tr)){var t=[];$n(t,tr,e,Xt(e)),tn(nr,t)}}function dr(e,t,n){e===`focusin`?(lr(),er=t,tr=n,er.attachEvent(`onpropertychange`,ur)):e===`focusout`&&lr()}function fr(e){if(e===`selectionchange`||e===`keyup`||e===`keydown`)return rr(tr)}function pr(e,t){if(e===`click`)return rr(t)}function mr(e,t){if(e===`input`||e===`change`)return rr(t)}function hr(e,t){return e===t&&(e!==0||1/e==1/t)||e!==e&&t!==t}var gr=typeof Object.is==`function`?Object.is:hr;function _r(e,t){if(gr(e,t))return!0;if(typeof e!=`object`||!e||typeof t!=`object`||!t)return!1;var n=Object.keys(e),r=Object.keys(t);if(n.length!==r.length)return!1;for(r=0;r<n.length;r++){var i=n[r];if(!ge.call(t,i)||!gr(e[i],t[i]))return!1}return!0}function vr(e){for(;e&&e.firstChild;)e=e.firstChild;return e}function yr(e,t){var n=vr(e);e=0;for(var r;n;){if(n.nodeType===3){if(r=e+n.textContent.length,e<=t&&r>=t)return{node:n,offset:t-e};e=r}a:{for(;n;){if(n.nextSibling){n=n.nextSibling;break a}n=n.parentNode}n=void 0}n=vr(n)}}function br(e,t){return e&&t?e===t?!0:e&&e.nodeType===3?!1:t&&t.nodeType===3?br(e,t.parentNode):`contains`in e?e.contains(t):e.compareDocumentPosition?!!(e.compareDocumentPosition(t)&16):!1:!1}function xr(e){e=e!=null&&e.ownerDocument!=null&&e.ownerDocument.defaultView!=null?e.ownerDocument.defaultView:window;for(var t=jt(e.document);t instanceof e.HTMLIFrameElement;){try{var n=typeof t.contentWindow.location.href==`string`}catch{n=!1}if(n)e=t.contentWindow;else break;t=jt(e.document)}return t}function Sr(e){var t=e&&e.nodeName&&e.nodeName.toLowerCase();return t&&(t===`input`&&(e.type===`text`||e.type===`search`||e.type===`tel`||e.type===`url`||e.type===`password`)||t===`textarea`||e.contentEditable===`true`)}var Cr=nn&&`documentMode`in document&&11>=document.documentMode,wr=null,Tr=null,Er=null,Dr=!1;function Or(e,t,n){var r=n.window===n?n.document:n.nodeType===9?n:n.ownerDocument;Dr||wr==null||wr!==jt(r)||(r=wr,`selectionStart`in r&&Sr(r)?r={start:r.selectionStart,end:r.selectionEnd}:(r=(r.ownerDocument&&r.ownerDocument.defaultView||window).getSelection(),r={anchorNode:r.anchorNode,anchorOffset:r.anchorOffset,focusNode:r.focusNode,focusOffset:r.focusOffset}),Er&&_r(Er,r)||(Er=r,r=Dd(Tr,`onSelect`),0<r.length&&(t=new hn(`onSelect`,`select`,null,t,n),e.push({event:t,listeners:r}),t.target=wr)))}function kr(e,t){var n={};return n[e.toLowerCase()]=t.toLowerCase(),n[`Webkit`+e]=`webkit`+t,n[`Moz`+e]=`moz`+t,n}var Ar={animationend:kr(`Animation`,`AnimationEnd`),animationiteration:kr(`Animation`,`AnimationIteration`),animationstart:kr(`Animation`,`AnimationStart`),transitionrun:kr(`Transition`,`TransitionRun`),transitionstart:kr(`Transition`,`TransitionStart`),transitioncancel:kr(`Transition`,`TransitionCancel`),transitionend:kr(`Transition`,`TransitionEnd`)},jr={},Mr={};nn&&(Mr=document.createElement(`div`).style,`AnimationEvent`in window||(delete Ar.animationend.animation,delete Ar.animationiteration.animation,delete Ar.animationstart.animation),`TransitionEvent`in window||delete Ar.transitionend.transition);function Nr(e){if(jr[e])return jr[e];if(!Ar[e])return e;var t=Ar[e],n;for(n in t)if(t.hasOwnProperty(n)&&n in Mr)return jr[e]=t[n];return e}var Pr=Nr(`animationend`),Fr=Nr(`animationiteration`),Ir=Nr(`animationstart`),Lr=Nr(`transitionrun`),Rr=Nr(`transitionstart`),zr=Nr(`transitioncancel`),Br=Nr(`transitionend`),Vr=new Map,Hr=`abort auxClick beforeToggle cancel canPlay canPlayThrough click close contextMenu copy cut drag dragEnd dragEnter dragExit dragLeave dragOver dragStart drop durationChange emptied encrypted ended error gotPointerCapture input invalid keyDown keyPress keyUp load loadedData loadedMetadata loadStart lostPointerCapture mouseDown mouseMove mouseOut mouseOver mouseUp paste pause play playing pointerCancel pointerDown pointerMove pointerOut pointerOver pointerUp progress rateChange reset resize seeked seeking stalled submit suspend timeUpdate touchCancel touchEnd touchStart volumeChange scroll toggle touchMove waiting wheel`.split(` `);Hr.push(`scrollEnd`);function Ur(e,t){Vr.set(e,t),_t(t,[e])}var Wr=typeof reportError==`function`?reportError:function(e){if(typeof window==`object`&&typeof window.ErrorEvent==`function`){var t=new window.ErrorEvent(`error`,{bubbles:!0,cancelable:!0,message:typeof e==`object`&&e&&typeof e.message==`string`?String(e.message):String(e),error:e});if(!window.dispatchEvent(t))return}else if(typeof process==`object`&&typeof process.emit==`function`){process.emit(`uncaughtException`,e);return}console.error(e)},Gr=[],Kr=0,qr=0;function Jr(){for(var e=Kr,t=qr=Kr=0;t<e;){var n=Gr[t];Gr[t++]=null;var r=Gr[t];Gr[t++]=null;var i=Gr[t];Gr[t++]=null;var a=Gr[t];if(Gr[t++]=null,r!==null&&i!==null){var o=r.pending;o===null?i.next=i:(i.next=o.next,o.next=i),r.pending=i}a!==0&&Qr(n,i,a)}}function Yr(e,t,n,r){Gr[Kr++]=e,Gr[Kr++]=t,Gr[Kr++]=n,Gr[Kr++]=r,qr|=r,e.lanes|=r,e=e.alternate,e!==null&&(e.lanes|=r)}function Xr(e,t,n,r){return Yr(e,t,n,r),$r(e)}function Zr(e,t){return Yr(e,null,null,t),$r(e)}function Qr(e,t,n){e.lanes|=n;var r=e.alternate;r!==null&&(r.lanes|=n);for(var i=!1,a=e.return;a!==null;)a.childLanes|=n,r=a.alternate,r!==null&&(r.childLanes|=n),a.tag===22&&(e=a.stateNode,e===null||e._visibility&1||(i=!0)),e=a,a=a.return;return e.tag===3?(a=e.stateNode,i&&t!==null&&(i=31-Ne(n),e=a.hiddenUpdates,r=e[i],r===null?e[i]=[t]:r.push(t),t.lane=n|536870912),a):null}function $r(e){if(50<fu)throw fu=0,pu=null,Error(i(185));for(var t=e.return;t!==null;)e=t,t=e.return;return e.tag===3?e.stateNode:null}var ei={};function ti(e,t,n,r){this.tag=e,this.key=n,this.sibling=this.child=this.return=this.stateNode=this.type=this.elementType=null,this.index=0,this.refCleanup=this.ref=null,this.pendingProps=t,this.dependencies=this.memoizedState=this.updateQueue=this.memoizedProps=null,this.mode=r,this.subtreeFlags=this.flags=0,this.deletions=null,this.childLanes=this.lanes=0,this.alternate=null}function ni(e,t,n,r){return new ti(e,t,n,r)}function ri(e){return e=e.prototype,!(!e||!e.isReactComponent)}function ii(e,t){var n=e.alternate;return n===null?(n=ni(e.tag,t,e.key,e.mode),n.elementType=e.elementType,n.type=e.type,n.stateNode=e.stateNode,n.alternate=e,e.alternate=n):(n.pendingProps=t,n.type=e.type,n.flags=0,n.subtreeFlags=0,n.deletions=null),n.flags=e.flags&65011712,n.childLanes=e.childLanes,n.lanes=e.lanes,n.child=e.child,n.memoizedProps=e.memoizedProps,n.memoizedState=e.memoizedState,n.updateQueue=e.updateQueue,t=e.dependencies,n.dependencies=t===null?null:{lanes:t.lanes,firstContext:t.firstContext},n.sibling=e.sibling,n.index=e.index,n.ref=e.ref,n.refCleanup=e.refCleanup,n}function ai(e,t){e.flags&=65011714;var n=e.alternate;return n===null?(e.childLanes=0,e.lanes=t,e.child=null,e.subtreeFlags=0,e.memoizedProps=null,e.memoizedState=null,e.updateQueue=null,e.dependencies=null,e.stateNode=null):(e.childLanes=n.childLanes,e.lanes=n.lanes,e.child=n.child,e.subtreeFlags=0,e.deletions=null,e.memoizedProps=n.memoizedProps,e.memoizedState=n.memoizedState,e.updateQueue=n.updateQueue,e.type=n.type,t=n.dependencies,e.dependencies=t===null?null:{lanes:t.lanes,firstContext:t.firstContext}),e}function oi(e,t,n,r,a,o){var s=0;if(r=e,typeof e==`function`)ri(e)&&(s=1);else if(typeof e==`string`)s=Hf(e,n,ne.current)?26:e===`html`||e===`head`||e===`body`?27:5;else a:switch(e){case k:return e=ni(31,n,t,a),e.elementType=k,e.lanes=o,e;case y:return si(n.children,a,o,t);case b:s=8,a|=24;break;case x:return e=ni(12,n,t,a|2),e.elementType=x,e.lanes=o,e;case T:return e=ni(13,n,t,a),e.elementType=T,e.lanes=o,e;case E:return e=ni(19,n,t,a),e.elementType=E,e.lanes=o,e;default:if(typeof e==`object`&&e)switch(e.$$typeof){case C:s=10;break a;case S:s=9;break a;case w:s=11;break a;case D:s=14;break a;case O:s=16,r=null;break a}s=29,n=Error(i(130,e===null?`null`:typeof e,``)),r=null}return t=ni(s,n,t,a),t.elementType=e,t.type=r,t.lanes=o,t}function si(e,t,n,r){return e=ni(7,e,r,t),e.lanes=n,e}function ci(e,t,n){return e=ni(6,e,null,t),e.lanes=n,e}function li(e){var t=ni(18,null,null,0);return t.stateNode=e,t}function ui(e,t,n){return t=ni(4,e.children===null?[]:e.children,e.key,t),t.lanes=n,t.stateNode={containerInfo:e.containerInfo,pendingChildren:null,implementation:e.implementation},t}var di=new WeakMap;function fi(e,t){if(typeof e==`object`&&e){var n=di.get(e);return n===void 0?(t={value:e,source:t,stack:he(t)},di.set(e,t),t):n}return{value:e,source:t,stack:he(t)}}var pi=[],mi=0,hi=null,gi=0,_i=[],vi=0,yi=null,bi=1,xi=``;function Si(e,t){pi[mi++]=gi,pi[mi++]=hi,hi=e,gi=t}function Ci(e,t,n){_i[vi++]=bi,_i[vi++]=xi,_i[vi++]=yi,yi=e;var r=bi;e=xi;var i=32-Ne(r)-1;r&=~(1<<i),n+=1;var a=32-Ne(t)+i;if(30<a){var o=i-i%5;a=(r&(1<<o)-1).toString(32),r>>=o,i-=o,bi=1<<32-Ne(t)+i|n<<i|r,xi=a+e}else bi=1<<a|n<<i|r,xi=e}function wi(e){e.return!==null&&(Si(e,1),Ci(e,1,0))}function Ti(e){for(;e===hi;)hi=pi[--mi],pi[mi]=null,gi=pi[--mi],pi[mi]=null;for(;e===yi;)yi=_i[--vi],_i[vi]=null,xi=_i[--vi],_i[vi]=null,bi=_i[--vi],_i[vi]=null}function Ei(e,t){_i[vi++]=bi,_i[vi++]=xi,_i[vi++]=yi,bi=t.id,xi=t.overflow,yi=e}var Di=null,Oi=null,ki=!1,Ai=null,ji=!1,Mi=Error(i(519));function Ni(e){throw zi(fi(Error(i(418,1<arguments.length&&arguments[1]!==void 0&&arguments[1]?`text`:`HTML`,``)),e)),Mi}function Pi(e){var t=e.stateNode,n=e.type,r=e.memoizedProps;switch(t[tt]=e,t[nt]=r,n){case`dialog`:Z(`cancel`,t),Z(`close`,t);break;case`iframe`:case`object`:case`embed`:Z(`load`,t);break;case`video`:case`audio`:for(n=0;n<yd.length;n++)Z(yd[n],t);break;case`source`:Z(`error`,t);break;case`img`:case`image`:case`link`:Z(`error`,t),Z(`load`,t);break;case`details`:Z(`toggle`,t);break;case`input`:Z(`invalid`,t),Ft(t,r.value,r.defaultValue,r.checked,r.defaultChecked,r.type,r.name,!0);break;case`select`:Z(`invalid`,t);break;case`textarea`:Z(`invalid`,t),zt(t,r.value,r.defaultValue,r.children)}n=r.children,typeof n!=`string`&&typeof n!=`number`&&typeof n!=`bigint`||t.textContent===``+n||!0===r.suppressHydrationWarning||Md(t.textContent,n)?(r.popover!=null&&(Z(`beforetoggle`,t),Z(`toggle`,t)),r.onScroll!=null&&Z(`scroll`,t),r.onScrollEnd!=null&&Z(`scrollend`,t),r.onClick!=null&&(t.onclick=Jt),t=!0):t=!1,t||Ni(e,!0)}function Fi(e){for(Di=e.return;Di;)switch(Di.tag){case 5:case 31:case 13:ji=!1;return;case 27:case 3:ji=!0;return;default:Di=Di.return}}function Ii(e){if(e!==Di)return!1;if(!ki)return Fi(e),ki=!0,!1;var t=e.tag,n;if((n=t!==3&&t!==27)&&((n=t===5)&&(n=e.type,n=!(n!==`form`&&n!==`button`)||Wd(e.type,e.memoizedProps)),n=!n),n&&Oi&&Ni(e),Fi(e),t===13){if(e=e.memoizedState,e=e===null?null:e.dehydrated,!e)throw Error(i(317));Oi=uf(e)}else if(t===31){if(e=e.memoizedState,e=e===null?null:e.dehydrated,!e)throw Error(i(317));Oi=uf(e)}else t===27?(t=Oi,Qd(e.type)?(e=lf,lf=null,Oi=e):Oi=t):Oi=Di?cf(e.stateNode.nextSibling):null;return!0}function Li(){Oi=Di=null,ki=!1}function Ri(){var e=Ai;return e!==null&&(Ql===null?Ql=e:Ql.push.apply(Ql,e),Ai=null),e}function zi(e){Ai===null?Ai=[e]:Ai.push(e)}var Bi=V(null),Vi=null,Hi=null;function Ui(e,t,n){te(Bi,t._currentValue),t._currentValue=n}function Wi(e){e._currentValue=Bi.current,ee(Bi)}function Gi(e,t,n){for(;e!==null;){var r=e.alternate;if((e.childLanes&t)===t?r!==null&&(r.childLanes&t)!==t&&(r.childLanes|=t):(e.childLanes|=t,r!==null&&(r.childLanes|=t)),e===n)break;e=e.return}}function Ki(e,t,n,r){var a=e.child;for(a!==null&&(a.return=e);a!==null;){var o=a.dependencies;if(o!==null){var s=a.child;o=o.firstContext;a:for(;o!==null;){var c=o;o=a;for(var l=0;l<t.length;l++)if(c.context===t[l]){o.lanes|=n,c=o.alternate,c!==null&&(c.lanes|=n),Gi(o.return,n,e),r||(s=null);break a}o=c.next}}else if(a.tag===18){if(s=a.return,s===null)throw Error(i(341));s.lanes|=n,o=s.alternate,o!==null&&(o.lanes|=n),Gi(s,n,e),s=null}else s=a.child;if(s!==null)s.return=a;else for(s=a;s!==null;){if(s===e){s=null;break}if(a=s.sibling,a!==null){a.return=s.return,s=a;break}s=s.return}a=s}}function qi(e,t,n,r){e=null;for(var a=t,o=!1;a!==null;){if(!o){if(a.flags&524288)o=!0;else if(a.flags&262144)break}if(a.tag===10){var s=a.alternate;if(s===null)throw Error(i(387));if(s=s.memoizedProps,s!==null){var c=a.type;gr(a.pendingProps.value,s.value)||(e===null?e=[c]:e.push(c))}}else if(a===ae.current){if(s=a.alternate,s===null)throw Error(i(387));s.memoizedState.memoizedState!==a.memoizedState.memoizedState&&(e===null?e=[Zf]:e.push(Zf))}a=a.return}e!==null&&Ki(t,e,n,r),t.flags|=262144}function Ji(e){for(e=e.firstContext;e!==null;){if(!gr(e.context._currentValue,e.memoizedValue))return!0;e=e.next}return!1}function Yi(e){Vi=e,Hi=null,e=e.dependencies,e!==null&&(e.firstContext=null)}function Xi(e){return Qi(Vi,e)}function Zi(e,t){return Vi===null&&Yi(e),Qi(e,t)}function Qi(e,t){var n=t._currentValue;if(t={context:t,memoizedValue:n,next:null},Hi===null){if(e===null)throw Error(i(308));Hi=t,e.dependencies={lanes:0,firstContext:t},e.flags|=524288}else Hi=Hi.next=t;return n}var $i=typeof AbortController<`u`?AbortController:function(){var e=[],t=this.signal={aborted:!1,addEventListener:function(t,n){e.push(n)}};this.abort=function(){t.aborted=!0,e.forEach(function(e){return e()})}},ea=t.unstable_scheduleCallback,ta=t.unstable_NormalPriority,na={$$typeof:C,Consumer:null,Provider:null,_currentValue:null,_currentValue2:null,_threadCount:0};function ra(){return{controller:new $i,data:new Map,refCount:0}}function ia(e){e.refCount--,e.refCount===0&&ea(ta,function(){e.controller.abort()})}var aa=null,oa=0,sa=0,ca=null;function la(e,t){if(aa===null){var n=aa=[];oa=0,sa=pd(),ca={status:`pending`,value:void 0,then:function(e){n.push(e)}}}return oa++,t.then(ua,ua),t}function ua(){if(--oa===0&&aa!==null){ca!==null&&(ca.status=`fulfilled`);var e=aa;aa=null,sa=0,ca=null;for(var t=0;t<e.length;t++)(0,e[t])()}}function da(e,t){var n=[],r={status:`pending`,value:null,reason:null,then:function(e){n.push(e)}};return e.then(function(){r.status=`fulfilled`,r.value=t;for(var e=0;e<n.length;e++)(0,n[e])(t)},function(e){for(r.status=`rejected`,r.reason=e,e=0;e<n.length;e++)(0,n[e])(void 0)}),r}var fa=I.S;I.S=function(e,t){tu=xe(),typeof t==`object`&&t&&typeof t.then==`function`&&la(e,t),fa!==null&&fa(e,t)};var pa=V(null);function ma(){var e=pa.current;return e===null?Il.pooledCache:e}function ha(e,t){t===null?te(pa,pa.current):te(pa,t.pool)}function ga(){var e=ma();return e===null?null:{parent:na._currentValue,pool:e}}var _a=Error(i(460)),va=Error(i(474)),ya=Error(i(542)),ba={then:function(){}};function xa(e){return e=e.status,e===`fulfilled`||e===`rejected`}function Sa(e,t,n){switch(n=e[n],n===void 0?e.push(t):n!==t&&(t.then(Jt,Jt),t=n),t.status){case`fulfilled`:return t.value;case`rejected`:throw e=t.reason,Ea(e),e;default:if(typeof t.status==`string`)t.then(Jt,Jt);else{if(e=Il,e!==null&&100<e.shellSuspendCounter)throw Error(i(482));e=t,e.status=`pending`,e.then(function(e){if(t.status===`pending`){var n=t;n.status=`fulfilled`,n.value=e}},function(e){if(t.status===`pending`){var n=t;n.status=`rejected`,n.reason=e}})}switch(t.status){case`fulfilled`:return t.value;case`rejected`:throw e=t.reason,Ea(e),e}throw wa=t,_a}}function Ca(e){try{var t=e._init;return t(e._payload)}catch(e){throw typeof e==`object`&&e&&typeof e.then==`function`?(wa=e,_a):e}}var wa=null;function Ta(){if(wa===null)throw Error(i(459));var e=wa;return wa=null,e}function Ea(e){if(e===_a||e===ya)throw Error(i(483))}var Da=null,Oa=0;function ka(e){var t=Oa;return Oa+=1,Da===null&&(Da=[]),Sa(Da,e,t)}function Aa(e,t){t=t.props.ref,e.ref=t===void 0?null:t}function ja(e,t){throw t.$$typeof===h?Error(i(525)):(e=Object.prototype.toString.call(t),Error(i(31,e===`[object Object]`?`object with keys {`+Object.keys(t).join(`, `)+`}`:e)))}function Ma(e){function t(t,n){if(e){var r=t.deletions;r===null?(t.deletions=[n],t.flags|=16):r.push(n)}}function n(n,r){if(!e)return null;for(;r!==null;)t(n,r),r=r.sibling;return null}function r(e){for(var t=new Map;e!==null;)e.key===null?t.set(e.index,e):t.set(e.key,e),e=e.sibling;return t}function a(e,t){return e=ii(e,t),e.index=0,e.sibling=null,e}function o(t,n,r){return t.index=r,e?(r=t.alternate,r===null?(t.flags|=67108866,n):(r=r.index,r<n?(t.flags|=67108866,n):r)):(t.flags|=1048576,n)}function s(t){return e&&t.alternate===null&&(t.flags|=67108866),t}function c(e,t,n,r){return t===null||t.tag!==6?(t=ci(n,e.mode,r),t.return=e,t):(t=a(t,n),t.return=e,t)}function l(e,t,n,r){var i=n.type;return i===y?d(e,t,n.props.children,r,n.key):t!==null&&(t.elementType===i||typeof i==`object`&&i&&i.$$typeof===O&&Ca(i)===t.type)?(t=a(t,n.props),Aa(t,n),t.return=e,t):(t=oi(n.type,n.key,n.props,null,e.mode,r),Aa(t,n),t.return=e,t)}function u(e,t,n,r){return t===null||t.tag!==4||t.stateNode.containerInfo!==n.containerInfo||t.stateNode.implementation!==n.implementation?(t=ui(n,e.mode,r),t.return=e,t):(t=a(t,n.children||[]),t.return=e,t)}function d(e,t,n,r,i){return t===null||t.tag!==7?(t=si(n,e.mode,r,i),t.return=e,t):(t=a(t,n),t.return=e,t)}function f(e,t,n){if(typeof t==`string`&&t!==``||typeof t==`number`||typeof t==`bigint`)return t=ci(``+t,e.mode,n),t.return=e,t;if(typeof t==`object`&&t){switch(t.$$typeof){case _:return n=oi(t.type,t.key,t.props,null,e.mode,n),Aa(n,t),n.return=e,n;case v:return t=ui(t,e.mode,n),t.return=e,t;case O:return t=Ca(t),f(e,t,n)}if(F(t)||M(t))return t=si(t,e.mode,n,null),t.return=e,t;if(typeof t.then==`function`)return f(e,ka(t),n);if(t.$$typeof===C)return f(e,Zi(e,t),n);ja(e,t)}return null}function p(e,t,n,r){var i=t===null?null:t.key;if(typeof n==`string`&&n!==``||typeof n==`number`||typeof n==`bigint`)return i===null?c(e,t,``+n,r):null;if(typeof n==`object`&&n){switch(n.$$typeof){case _:return n.key===i?l(e,t,n,r):null;case v:return n.key===i?u(e,t,n,r):null;case O:return n=Ca(n),p(e,t,n,r)}if(F(n)||M(n))return i===null?d(e,t,n,r,null):null;if(typeof n.then==`function`)return p(e,t,ka(n),r);if(n.$$typeof===C)return p(e,t,Zi(e,n),r);ja(e,n)}return null}function m(e,t,n,r,i){if(typeof r==`string`&&r!==``||typeof r==`number`||typeof r==`bigint`)return e=e.get(n)||null,c(t,e,``+r,i);if(typeof r==`object`&&r){switch(r.$$typeof){case _:return e=e.get(r.key===null?n:r.key)||null,l(t,e,r,i);case v:return e=e.get(r.key===null?n:r.key)||null,u(t,e,r,i);case O:return r=Ca(r),m(e,t,n,r,i)}if(F(r)||M(r))return e=e.get(n)||null,d(t,e,r,i,null);if(typeof r.then==`function`)return m(e,t,n,ka(r),i);if(r.$$typeof===C)return m(e,t,n,Zi(t,r),i);ja(t,r)}return null}function h(i,a,s,c){for(var l=null,u=null,d=a,h=a=0,g=null;d!==null&&h<s.length;h++){d.index>h?(g=d,d=null):g=d.sibling;var _=p(i,d,s[h],c);if(_===null){d===null&&(d=g);break}e&&d&&_.alternate===null&&t(i,d),a=o(_,a,h),u===null?l=_:u.sibling=_,u=_,d=g}if(h===s.length)return n(i,d),ki&&Si(i,h),l;if(d===null){for(;h<s.length;h++)d=f(i,s[h],c),d!==null&&(a=o(d,a,h),u===null?l=d:u.sibling=d,u=d);return ki&&Si(i,h),l}for(d=r(d);h<s.length;h++)g=m(d,i,h,s[h],c),g!==null&&(e&&g.alternate!==null&&d.delete(g.key===null?h:g.key),a=o(g,a,h),u===null?l=g:u.sibling=g,u=g);return e&&d.forEach(function(e){return t(i,e)}),ki&&Si(i,h),l}function g(a,s,c,l){if(c==null)throw Error(i(151));for(var u=null,d=null,h=s,g=s=0,_=null,v=c.next();h!==null&&!v.done;g++,v=c.next()){h.index>g?(_=h,h=null):_=h.sibling;var y=p(a,h,v.value,l);if(y===null){h===null&&(h=_);break}e&&h&&y.alternate===null&&t(a,h),s=o(y,s,g),d===null?u=y:d.sibling=y,d=y,h=_}if(v.done)return n(a,h),ki&&Si(a,g),u;if(h===null){for(;!v.done;g++,v=c.next())v=f(a,v.value,l),v!==null&&(s=o(v,s,g),d===null?u=v:d.sibling=v,d=v);return ki&&Si(a,g),u}for(h=r(h);!v.done;g++,v=c.next())v=m(h,a,g,v.value,l),v!==null&&(e&&v.alternate!==null&&h.delete(v.key===null?g:v.key),s=o(v,s,g),d===null?u=v:d.sibling=v,d=v);return e&&h.forEach(function(e){return t(a,e)}),ki&&Si(a,g),u}function b(e,r,o,c){if(typeof o==`object`&&o&&o.type===y&&o.key===null&&(o=o.props.children),typeof o==`object`&&o){switch(o.$$typeof){case _:a:{for(var l=o.key;r!==null;){if(r.key===l){if(l=o.type,l===y){if(r.tag===7){n(e,r.sibling),c=a(r,o.props.children),c.return=e,e=c;break a}}else if(r.elementType===l||typeof l==`object`&&l&&l.$$typeof===O&&Ca(l)===r.type){n(e,r.sibling),c=a(r,o.props),Aa(c,o),c.return=e,e=c;break a}n(e,r);break}else t(e,r);r=r.sibling}o.type===y?(c=si(o.props.children,e.mode,c,o.key),c.return=e,e=c):(c=oi(o.type,o.key,o.props,null,e.mode,c),Aa(c,o),c.return=e,e=c)}return s(e);case v:a:{for(l=o.key;r!==null;){if(r.key===l)if(r.tag===4&&r.stateNode.containerInfo===o.containerInfo&&r.stateNode.implementation===o.implementation){n(e,r.sibling),c=a(r,o.children||[]),c.return=e,e=c;break a}else{n(e,r);break}else t(e,r);r=r.sibling}c=ui(o,e.mode,c),c.return=e,e=c}return s(e);case O:return o=Ca(o),b(e,r,o,c)}if(F(o))return h(e,r,o,c);if(M(o)){if(l=M(o),typeof l!=`function`)throw Error(i(150));return o=l.call(o),g(e,r,o,c)}if(typeof o.then==`function`)return b(e,r,ka(o),c);if(o.$$typeof===C)return b(e,r,Zi(e,o),c);ja(e,o)}return typeof o==`string`&&o!==``||typeof o==`number`||typeof o==`bigint`?(o=``+o,r!==null&&r.tag===6?(n(e,r.sibling),c=a(r,o),c.return=e,e=c):(n(e,r),c=ci(o,e.mode,c),c.return=e,e=c),s(e)):n(e,r)}return function(e,t,n,r){try{Oa=0;var i=b(e,t,n,r);return Da=null,i}catch(t){if(t===_a||t===ya)throw t;var a=ni(29,t,null,e.mode);return a.lanes=r,a.return=e,a}}}var Na=Ma(!0),Pa=Ma(!1),Fa=!1;function Ia(e){e.updateQueue={baseState:e.memoizedState,firstBaseUpdate:null,lastBaseUpdate:null,shared:{pending:null,lanes:0,hiddenCallbacks:null},callbacks:null}}function La(e,t){e=e.updateQueue,t.updateQueue===e&&(t.updateQueue={baseState:e.baseState,firstBaseUpdate:e.firstBaseUpdate,lastBaseUpdate:e.lastBaseUpdate,shared:e.shared,callbacks:null})}function Ra(e){return{lane:e,tag:0,payload:null,callback:null,next:null}}function za(e,t,n){var r=e.updateQueue;if(r===null)return null;if(r=r.shared,Fl&2){var i=r.pending;return i===null?t.next=t:(t.next=i.next,i.next=t),r.pending=t,t=$r(e),Qr(e,null,n),t}return Yr(e,r,t,n),$r(e)}function Ba(e,t,n){if(t=t.updateQueue,t!==null&&(t=t.shared,n&4194048)){var r=t.lanes;r&=e.pendingLanes,n|=r,t.lanes=n,Ye(e,n)}}function Va(e,t){var n=e.updateQueue,r=e.alternate;if(r!==null&&(r=r.updateQueue,n===r)){var i=null,a=null;if(n=n.firstBaseUpdate,n!==null){do{var o={lane:n.lane,tag:n.tag,payload:n.payload,callback:null,next:null};a===null?i=a=o:a=a.next=o,n=n.next}while(n!==null);a===null?i=a=t:a=a.next=t}else i=a=t;n={baseState:r.baseState,firstBaseUpdate:i,lastBaseUpdate:a,shared:r.shared,callbacks:r.callbacks},e.updateQueue=n;return}e=n.lastBaseUpdate,e===null?n.firstBaseUpdate=t:e.next=t,n.lastBaseUpdate=t}var Ha=!1;function Ua(){if(Ha){var e=ca;if(e!==null)throw e}}function Wa(e,t,n,r){Ha=!1;var i=e.updateQueue;Fa=!1;var a=i.firstBaseUpdate,o=i.lastBaseUpdate,s=i.shared.pending;if(s!==null){i.shared.pending=null;var c=s,l=c.next;c.next=null,o===null?a=l:o.next=l,o=c;var u=e.alternate;u!==null&&(u=u.updateQueue,s=u.lastBaseUpdate,s!==o&&(s===null?u.firstBaseUpdate=l:s.next=l,u.lastBaseUpdate=c))}if(a!==null){var d=i.baseState;o=0,u=l=c=null,s=a;do{var f=s.lane&-536870913,m=f!==s.lane;if(m?(Rl&f)===f:(r&f)===f){f!==0&&f===sa&&(Ha=!0),u!==null&&(u=u.next={lane:0,tag:s.tag,payload:s.payload,callback:null,next:null});a:{var h=e,g=s;f=t;var _=n;switch(g.tag){case 1:if(h=g.payload,typeof h==`function`){d=h.call(_,d,f);break a}d=h;break a;case 3:h.flags=h.flags&-65537|128;case 0:if(h=g.payload,f=typeof h==`function`?h.call(_,d,f):h,f==null)break a;d=p({},d,f);break a;case 2:Fa=!0}}f=s.callback,f!==null&&(e.flags|=64,m&&(e.flags|=8192),m=i.callbacks,m===null?i.callbacks=[f]:m.push(f))}else m={lane:f,tag:s.tag,payload:s.payload,callback:s.callback,next:null},u===null?(l=u=m,c=d):u=u.next=m,o|=f;if(s=s.next,s===null){if(s=i.shared.pending,s===null)break;m=s,s=m.next,m.next=null,i.lastBaseUpdate=m,i.shared.pending=null}}while(1);u===null&&(c=d),i.baseState=c,i.firstBaseUpdate=l,i.lastBaseUpdate=u,a===null&&(i.shared.lanes=0),Kl|=o,e.lanes=o,e.memoizedState=d}}function Ga(e,t){if(typeof e!=`function`)throw Error(i(191,e));e.call(t)}function Ka(e,t){var n=e.callbacks;if(n!==null)for(e.callbacks=null,e=0;e<n.length;e++)Ga(n[e],t)}var qa=V(null),Ja=V(0);function Ya(e,t){e=Wl,te(Ja,e),te(qa,t),Wl=e|t.baseLanes}function Xa(){te(Ja,Wl),te(qa,qa.current)}function Za(){Wl=Ja.current,ee(qa),ee(Ja)}var Qa=V(null),$a=null;function eo(e){var t=e.alternate;te(ao,ao.current&1),te(Qa,e),$a===null&&(t===null||qa.current!==null||t.memoizedState!==null)&&($a=e)}function to(e){te(ao,ao.current),te(Qa,e),$a===null&&($a=e)}function no(e){e.tag===22?(te(ao,ao.current),te(Qa,e),$a===null&&($a=e)):ro(e)}function ro(){te(ao,ao.current),te(Qa,Qa.current)}function io(e){ee(Qa),$a===e&&($a=null),ee(ao)}var ao=V(0);function oo(e){for(var t=e;t!==null;){if(t.tag===13){var n=t.memoizedState;if(n!==null&&(n=n.dehydrated,n===null||af(n)||of(n)))return t}else if(t.tag===19&&(t.memoizedProps.revealOrder===`forwards`||t.memoizedProps.revealOrder===`backwards`||t.memoizedProps.revealOrder===`unstable_legacy-backwards`||t.memoizedProps.revealOrder===`together`)){if(t.flags&128)return t}else if(t.child!==null){t.child.return=t,t=t.child;continue}if(t===e)break;for(;t.sibling===null;){if(t.return===null||t.return===e)return null;t=t.return}t.sibling.return=t.return,t=t.sibling}return null}var G=0,so=null,co=null,lo=null,uo=!1,fo=!1,po=!1,mo=0,ho=0,go=null,_o=0;function vo(){throw Error(i(321))}function yo(e,t){if(t===null)return!1;for(var n=0;n<t.length&&n<e.length;n++)if(!gr(e[n],t[n]))return!1;return!0}function bo(e,t,n,r,i,a){return G=a,so=t,t.memoizedState=null,t.updateQueue=null,t.lanes=0,I.H=e===null||e.memoizedState===null?Fs:Is,po=!1,a=n(r,i),po=!1,fo&&(a=So(t,n,r,i)),xo(e),a}function xo(e){I.H=Ps;var t=co!==null&&co.next!==null;if(G=0,lo=co=so=null,uo=!1,ho=0,go=null,t)throw Error(i(300));e===null||Qs||(e=e.dependencies,e!==null&&Ji(e)&&(Qs=!0))}function So(e,t,n,r){so=e;var a=0;do{if(fo&&(go=null),ho=0,fo=!1,25<=a)throw Error(i(301));if(a+=1,lo=co=null,e.updateQueue!=null){var o=e.updateQueue;o.lastEffect=null,o.events=null,o.stores=null,o.memoCache!=null&&(o.memoCache.index=0)}I.H=Ls,o=t(n,r)}while(fo);return o}function Co(){var e=I.H,t=e.useState()[0];return t=typeof t.then==`function`?Oo(t):t,e=e.useState()[0],(co===null?null:co.memoizedState)!==e&&(so.flags|=1024),t}function wo(){var e=mo!==0;return mo=0,e}function K(e,t,n){t.updateQueue=e.updateQueue,t.flags&=-2053,e.lanes&=~n}function q(e){if(uo){for(e=e.memoizedState;e!==null;){var t=e.queue;t!==null&&(t.pending=null),e=e.next}uo=!1}G=0,lo=co=so=null,fo=!1,ho=mo=0,go=null}function To(){var e={memoizedState:null,baseState:null,baseQueue:null,queue:null,next:null};return lo===null?so.memoizedState=lo=e:lo=lo.next=e,lo}function Eo(){if(co===null){var e=so.alternate;e=e===null?null:e.memoizedState}else e=co.next;var t=lo===null?so.memoizedState:lo.next;if(t!==null)lo=t,co=e;else{if(e===null)throw so.alternate===null?Error(i(467)):Error(i(310));co=e,e={memoizedState:co.memoizedState,baseState:co.baseState,baseQueue:co.baseQueue,queue:co.queue,next:null},lo===null?so.memoizedState=lo=e:lo=lo.next=e}return lo}function Do(){return{lastEffect:null,events:null,stores:null,memoCache:null}}function Oo(e){var t=ho;return ho+=1,go===null&&(go=[]),e=Sa(go,e,t),t=so,(lo===null?t.memoizedState:lo.next)===null&&(t=t.alternate,I.H=t===null||t.memoizedState===null?Fs:Is),e}function ko(e){if(typeof e==`object`&&e){if(typeof e.then==`function`)return Oo(e);if(e.$$typeof===C)return Xi(e)}throw Error(i(438,String(e)))}function Ao(e){var t=null,n=so.updateQueue;if(n!==null&&(t=n.memoCache),t==null){var r=so.alternate;r!==null&&(r=r.updateQueue,r!==null&&(r=r.memoCache,r!=null&&(t={data:r.data.map(function(e){return e.slice()}),index:0})))}if(t??={data:[],index:0},n===null&&(n=Do(),so.updateQueue=n),n.memoCache=t,n=t.data[t.index],n===void 0)for(n=t.data[t.index]=Array(e),r=0;r<e;r++)n[r]=A;return t.index++,n}function jo(e,t){return typeof t==`function`?t(e):t}function J(e){return Mo(Eo(),co,e)}function Mo(e,t,n){var r=e.queue;if(r===null)throw Error(i(311));r.lastRenderedReducer=n;var a=e.baseQueue,o=r.pending;if(o!==null){if(a!==null){var s=a.next;a.next=o.next,o.next=s}t.baseQueue=a=o,r.pending=null}if(o=e.baseState,a===null)e.memoizedState=o;else{t=a.next;var c=s=null,l=null,u=t,d=!1;do{var f=u.lane&-536870913;if(f===u.lane?(G&f)===f:(Rl&f)===f){var p=u.revertLane;if(p===0)l!==null&&(l=l.next={lane:0,revertLane:0,gesture:null,action:u.action,hasEagerState:u.hasEagerState,eagerState:u.eagerState,next:null}),f===sa&&(d=!0);else if((G&p)===p){u=u.next,p===sa&&(d=!0);continue}else f={lane:0,revertLane:u.revertLane,gesture:null,action:u.action,hasEagerState:u.hasEagerState,eagerState:u.eagerState,next:null},l===null?(c=l=f,s=o):l=l.next=f,so.lanes|=p,Kl|=p;f=u.action,po&&n(o,f),o=u.hasEagerState?u.eagerState:n(o,f)}else p={lane:f,revertLane:u.revertLane,gesture:u.gesture,action:u.action,hasEagerState:u.hasEagerState,eagerState:u.eagerState,next:null},l===null?(c=l=p,s=o):l=l.next=p,so.lanes|=f,Kl|=f;u=u.next}while(u!==null&&u!==t);if(l===null?s=o:l.next=c,!gr(o,e.memoizedState)&&(Qs=!0,d&&(n=ca,n!==null)))throw n;e.memoizedState=o,e.baseState=s,e.baseQueue=l,r.lastRenderedState=o}return a===null&&(r.lanes=0),[e.memoizedState,r.dispatch]}function No(e){var t=Eo(),n=t.queue;if(n===null)throw Error(i(311));n.lastRenderedReducer=e;var r=n.dispatch,a=n.pending,o=t.memoizedState;if(a!==null){n.pending=null;var s=a=a.next;do o=e(o,s.action),s=s.next;while(s!==a);gr(o,t.memoizedState)||(Qs=!0),t.memoizedState=o,t.baseQueue===null&&(t.baseState=o),n.lastRenderedState=o}return[o,r]}function Po(e,t,n){var r=so,a=Eo(),o=ki;if(o){if(n===void 0)throw Error(i(407));n=n()}else n=t();var s=!gr((co||a).memoizedState,n);if(s&&(a.memoizedState=n,Qs=!0),a=a.queue,as(Lo.bind(null,r,a,e),[e]),a.getSnapshot!==t||s||lo!==null&&lo.memoizedState.tag&1){if(r.flags|=2048,es(9,{destroy:void 0},Io.bind(null,r,a,n,t),null),Il===null)throw Error(i(349));o||G&127||Fo(r,t,n)}return n}function Fo(e,t,n){e.flags|=16384,e={getSnapshot:t,value:n},t=so.updateQueue,t===null?(t=Do(),so.updateQueue=t,t.stores=[e]):(n=t.stores,n===null?t.stores=[e]:n.push(e))}function Io(e,t,n,r){t.value=n,t.getSnapshot=r,Ro(t)&&zo(e)}function Lo(e,t,n){return n(function(){Ro(t)&&zo(e)})}function Ro(e){var t=e.getSnapshot;e=e.value;try{var n=t();return!gr(e,n)}catch{return!0}}function zo(e){var t=Zr(e,2);t!==null&&gu(t,e,2)}function Bo(e){var t=To();if(typeof e==`function`){var n=e;if(e=n(),po){Me(!0);try{n()}finally{Me(!1)}}}return t.memoizedState=t.baseState=e,t.queue={pending:null,lanes:0,dispatch:null,lastRenderedReducer:jo,lastRenderedState:e},t}function Vo(e,t,n,r){return e.baseState=n,Mo(e,co,typeof r==`function`?r:jo)}function Ho(e,t,n,r,a){if(js(e))throw Error(i(485));if(e=t.action,e!==null){var o={payload:a,action:e,next:null,isTransition:!0,status:`pending`,value:null,reason:null,listeners:[],then:function(e){o.listeners.push(e)}};I.T===null?o.isTransition=!1:n(!0),r(o),n=t.pending,n===null?(o.next=t.pending=o,Uo(t,o)):(o.next=n.next,t.pending=n.next=o)}}function Uo(e,t){var n=t.action,r=t.payload,i=e.state;if(t.isTransition){var a=I.T,o={};I.T=o;try{var s=n(i,r),c=I.S;c!==null&&c(o,s),Wo(e,t,s)}catch(n){Ko(e,t,n)}finally{a!==null&&o.types!==null&&(a.types=o.types),I.T=a}}else try{a=n(i,r),Wo(e,t,a)}catch(n){Ko(e,t,n)}}function Wo(e,t,n){typeof n==`object`&&n&&typeof n.then==`function`?n.then(function(n){Go(e,t,n)},function(n){return Ko(e,t,n)}):Go(e,t,n)}function Go(e,t,n){t.status=`fulfilled`,t.value=n,qo(t),e.state=n,t=e.pending,t!==null&&(n=t.next,n===t?e.pending=null:(n=n.next,t.next=n,Uo(e,n)))}function Ko(e,t,n){var r=e.pending;if(e.pending=null,r!==null){r=r.next;do t.status=`rejected`,t.reason=n,qo(t),t=t.next;while(t!==r)}e.action=null}function qo(e){e=e.listeners;for(var t=0;t<e.length;t++)(0,e[t])()}function Jo(e,t){return t}function Yo(e,t){if(ki){var n=Il.formState;if(n!==null){a:{var r=so;if(ki){if(Oi){b:{for(var i=Oi,a=ji;i.nodeType!==8;){if(!a){i=null;break b}if(i=cf(i.nextSibling),i===null){i=null;break b}}a=i.data,i=a===`F!`||a===`F`?i:null}if(i){Oi=cf(i.nextSibling),r=i.data===`F!`;break a}}Ni(r)}r=!1}r&&(t=n[0])}}return n=To(),n.memoizedState=n.baseState=t,r={pending:null,lanes:0,dispatch:null,lastRenderedReducer:Jo,lastRenderedState:t},n.queue=r,n=Os.bind(null,so,r),r.dispatch=n,r=Bo(!1),a=As.bind(null,so,!1,r.queue),r=To(),i={state:t,dispatch:null,action:e,pending:null},r.queue=i,n=Ho.bind(null,so,i,a,n),i.dispatch=n,r.memoizedState=e,[t,n,!1]}function Xo(e){return Zo(Eo(),co,e)}function Zo(e,t,n){if(t=Mo(e,t,Jo)[0],e=J(jo)[0],typeof t==`object`&&t&&typeof t.then==`function`)try{var r=Oo(t)}catch(e){throw e===_a?ya:e}else r=t;t=Eo();var i=t.queue,a=i.dispatch;return n!==t.memoizedState&&(so.flags|=2048,es(9,{destroy:void 0},Qo.bind(null,i,n),null)),[r,a,e]}function Qo(e,t){e.action=t}function $o(e){var t=Eo(),n=co;if(n!==null)return Zo(t,n,e);Eo(),t=t.memoizedState,n=Eo();var r=n.queue.dispatch;return n.memoizedState=e,[t,r,!1]}function es(e,t,n,r){return e={tag:e,create:n,deps:r,inst:t,next:null},t=so.updateQueue,t===null&&(t=Do(),so.updateQueue=t),n=t.lastEffect,n===null?t.lastEffect=e.next=e:(r=n.next,n.next=e,e.next=r,t.lastEffect=e),e}function ts(){return Eo().memoizedState}function ns(e,t,n,r){var i=To();so.flags|=e,i.memoizedState=es(1|t,{destroy:void 0},n,r===void 0?null:r)}function rs(e,t,n,r){var i=Eo();r=r===void 0?null:r;var a=i.memoizedState.inst;co!==null&&r!==null&&yo(r,co.memoizedState.deps)?i.memoizedState=es(t,a,n,r):(so.flags|=e,i.memoizedState=es(1|t,a,n,r))}function is(e,t){ns(8390656,8,e,t)}function as(e,t){rs(2048,8,e,t)}function ss(e){so.flags|=4;var t=so.updateQueue;if(t===null)t=Do(),so.updateQueue=t,t.events=[e];else{var n=t.events;n===null?t.events=[e]:n.push(e)}}function cs(e){var t=Eo().memoizedState;return ss({ref:t,nextImpl:e}),function(){if(Fl&2)throw Error(i(440));return t.impl.apply(void 0,arguments)}}function ls(e,t){return rs(4,2,e,t)}function us(e,t){return rs(4,4,e,t)}function ds(e,t){if(typeof t==`function`){e=e();var n=t(e);return function(){typeof n==`function`?n():t(null)}}if(t!=null)return e=e(),t.current=e,function(){t.current=null}}function fs(e,t,n){n=n==null?null:n.concat([e]),rs(4,4,ds.bind(null,t,e),n)}function ps(){}function ms(e,t){var n=Eo();t=t===void 0?null:t;var r=n.memoizedState;return t!==null&&yo(t,r[1])?r[0]:(n.memoizedState=[e,t],e)}function hs(e,t){var n=Eo();t=t===void 0?null:t;var r=n.memoizedState;if(t!==null&&yo(t,r[1]))return r[0];if(r=e(),po){Me(!0);try{e()}finally{Me(!1)}}return n.memoizedState=[r,t],r}function gs(e,t,n){return n===void 0||G&1073741824&&!(Rl&261930)?e.memoizedState=t:(e.memoizedState=n,e=hu(),so.lanes|=e,Kl|=e,n)}function _s(e,t,n,r){return gr(n,t)?n:qa.current===null?!(G&42)||G&1073741824&&!(Rl&261930)?(Qs=!0,e.memoizedState=n):(e=hu(),so.lanes|=e,Kl|=e,t):(e=gs(e,n,r),gr(e,t)||(Qs=!0),e)}function vs(e,t,n,r,i){var a=L.p;L.p=a!==0&&8>a?a:8;var o=I.T,s={};I.T=s,As(e,!1,t,n);try{var c=i(),l=I.S;l!==null&&l(s,c),typeof c==`object`&&c&&typeof c.then==`function`?ks(e,t,da(c,r),mu(e)):ks(e,t,r,mu(e))}catch(n){ks(e,t,{then:function(){},status:`rejected`,reason:n},mu())}finally{L.p=a,o!==null&&s.types!==null&&(o.types=s.types),I.T=o}}function ys(){}function bs(e,t,n,r){if(e.tag!==5)throw Error(i(476));var a=xs(e).queue;vs(e,a,t,R,n===null?ys:function(){return Ss(e),n(r)})}function xs(e){var t=e.memoizedState;if(t!==null)return t;t={memoizedState:R,baseState:R,baseQueue:null,queue:{pending:null,lanes:0,dispatch:null,lastRenderedReducer:jo,lastRenderedState:R},next:null};var n={};return t.next={memoizedState:n,baseState:n,baseQueue:null,queue:{pending:null,lanes:0,dispatch:null,lastRenderedReducer:jo,lastRenderedState:n},next:null},e.memoizedState=t,e=e.alternate,e!==null&&(e.memoizedState=t),t}function Ss(e){var t=xs(e);t.next===null&&(t=e.alternate.memoizedState),ks(e,t.next.queue,{},mu())}function Cs(){return Xi(Zf)}function ws(){return Eo().memoizedState}function Ts(){return Eo().memoizedState}function Es(e){for(var t=e.return;t!==null;){switch(t.tag){case 24:case 3:var n=mu();e=Ra(n);var r=za(t,e,n);r!==null&&(gu(r,t,n),Ba(r,t,n)),t={cache:ra()},e.payload=t;return}t=t.return}}function Ds(e,t,n){var r=mu();n={lane:r,revertLane:0,gesture:null,action:n,hasEagerState:!1,eagerState:null,next:null},js(e)?Ms(t,n):(n=Xr(e,t,n,r),n!==null&&(gu(n,e,r),Ns(n,t,r)))}function Os(e,t,n){ks(e,t,n,mu())}function ks(e,t,n,r){var i={lane:r,revertLane:0,gesture:null,action:n,hasEagerState:!1,eagerState:null,next:null};if(js(e))Ms(t,i);else{var a=e.alternate;if(e.lanes===0&&(a===null||a.lanes===0)&&(a=t.lastRenderedReducer,a!==null))try{var o=t.lastRenderedState,s=a(o,n);if(i.hasEagerState=!0,i.eagerState=s,gr(s,o))return Yr(e,t,i,0),Il===null&&Jr(),!1}catch{}if(n=Xr(e,t,i,r),n!==null)return gu(n,e,r),Ns(n,t,r),!0}return!1}function As(e,t,n,r){if(r={lane:2,revertLane:pd(),gesture:null,action:r,hasEagerState:!1,eagerState:null,next:null},js(e)){if(t)throw Error(i(479))}else t=Xr(e,n,r,2),t!==null&&gu(t,e,2)}function js(e){var t=e.alternate;return e===so||t!==null&&t===so}function Ms(e,t){fo=uo=!0;var n=e.pending;n===null?t.next=t:(t.next=n.next,n.next=t),e.pending=t}function Ns(e,t,n){if(n&4194048){var r=t.lanes;r&=e.pendingLanes,n|=r,t.lanes=n,Ye(e,n)}}var Ps={readContext:Xi,use:ko,useCallback:vo,useContext:vo,useEffect:vo,useImperativeHandle:vo,useLayoutEffect:vo,useInsertionEffect:vo,useMemo:vo,useReducer:vo,useRef:vo,useState:vo,useDebugValue:vo,useDeferredValue:vo,useTransition:vo,useSyncExternalStore:vo,useId:vo,useHostTransitionStatus:vo,useFormState:vo,useActionState:vo,useOptimistic:vo,useMemoCache:vo,useCacheRefresh:vo};Ps.useEffectEvent=vo;var Fs={readContext:Xi,use:ko,useCallback:function(e,t){return To().memoizedState=[e,t===void 0?null:t],e},useContext:Xi,useEffect:is,useImperativeHandle:function(e,t,n){n=n==null?null:n.concat([e]),ns(4194308,4,ds.bind(null,t,e),n)},useLayoutEffect:function(e,t){return ns(4194308,4,e,t)},useInsertionEffect:function(e,t){ns(4,2,e,t)},useMemo:function(e,t){var n=To();t=t===void 0?null:t;var r=e();if(po){Me(!0);try{e()}finally{Me(!1)}}return n.memoizedState=[r,t],r},useReducer:function(e,t,n){var r=To();if(n!==void 0){var i=n(t);if(po){Me(!0);try{n(t)}finally{Me(!1)}}}else i=t;return r.memoizedState=r.baseState=i,e={pending:null,lanes:0,dispatch:null,lastRenderedReducer:e,lastRenderedState:i},r.queue=e,e=e.dispatch=Ds.bind(null,so,e),[r.memoizedState,e]},useRef:function(e){var t=To();return e={current:e},t.memoizedState=e},useState:function(e){e=Bo(e);var t=e.queue,n=Os.bind(null,so,t);return t.dispatch=n,[e.memoizedState,n]},useDebugValue:ps,useDeferredValue:function(e,t){return gs(To(),e,t)},useTransition:function(){var e=Bo(!1);return e=vs.bind(null,so,e.queue,!0,!1),To().memoizedState=e,[!1,e]},useSyncExternalStore:function(e,t,n){var r=so,a=To();if(ki){if(n===void 0)throw Error(i(407));n=n()}else{if(n=t(),Il===null)throw Error(i(349));Rl&127||Fo(r,t,n)}a.memoizedState=n;var o={value:n,getSnapshot:t};return a.queue=o,is(Lo.bind(null,r,o,e),[e]),r.flags|=2048,es(9,{destroy:void 0},Io.bind(null,r,o,n,t),null),n},useId:function(){var e=To(),t=Il.identifierPrefix;if(ki){var n=xi,r=bi;n=(r&~(1<<32-Ne(r)-1)).toString(32)+n,t=`_`+t+`R_`+n,n=mo++,0<n&&(t+=`H`+n.toString(32)),t+=`_`}else n=_o++,t=`_`+t+`r_`+n.toString(32)+`_`;return e.memoizedState=t},useHostTransitionStatus:Cs,useFormState:Yo,useActionState:Yo,useOptimistic:function(e){var t=To();t.memoizedState=t.baseState=e;var n={pending:null,lanes:0,dispatch:null,lastRenderedReducer:null,lastRenderedState:null};return t.queue=n,t=As.bind(null,so,!0,n),n.dispatch=t,[e,t]},useMemoCache:Ao,useCacheRefresh:function(){return To().memoizedState=Es.bind(null,so)},useEffectEvent:function(e){var t=To(),n={impl:e};return t.memoizedState=n,function(){if(Fl&2)throw Error(i(440));return n.impl.apply(void 0,arguments)}}},Is={readContext:Xi,use:ko,useCallback:ms,useContext:Xi,useEffect:as,useImperativeHandle:fs,useInsertionEffect:ls,useLayoutEffect:us,useMemo:hs,useReducer:J,useRef:ts,useState:function(){return J(jo)},useDebugValue:ps,useDeferredValue:function(e,t){return _s(Eo(),co.memoizedState,e,t)},useTransition:function(){var e=J(jo)[0],t=Eo().memoizedState;return[typeof e==`boolean`?e:Oo(e),t]},useSyncExternalStore:Po,useId:ws,useHostTransitionStatus:Cs,useFormState:Xo,useActionState:Xo,useOptimistic:function(e,t){return Vo(Eo(),co,e,t)},useMemoCache:Ao,useCacheRefresh:Ts};Is.useEffectEvent=cs;var Ls={readContext:Xi,use:ko,useCallback:ms,useContext:Xi,useEffect:as,useImperativeHandle:fs,useInsertionEffect:ls,useLayoutEffect:us,useMemo:hs,useReducer:No,useRef:ts,useState:function(){return No(jo)},useDebugValue:ps,useDeferredValue:function(e,t){var n=Eo();return co===null?gs(n,e,t):_s(n,co.memoizedState,e,t)},useTransition:function(){var e=No(jo)[0],t=Eo().memoizedState;return[typeof e==`boolean`?e:Oo(e),t]},useSyncExternalStore:Po,useId:ws,useHostTransitionStatus:Cs,useFormState:$o,useActionState:$o,useOptimistic:function(e,t){var n=Eo();return co===null?(n.baseState=e,[e,n.queue.dispatch]):Vo(n,co,e,t)},useMemoCache:Ao,useCacheRefresh:Ts};Ls.useEffectEvent=cs;function Rs(e,t,n,r){t=e.memoizedState,n=n(r,t),n=n==null?t:p({},t,n),e.memoizedState=n,e.lanes===0&&(e.updateQueue.baseState=n)}var zs={enqueueSetState:function(e,t,n){e=e._reactInternals;var r=mu(),i=Ra(r);i.payload=t,n!=null&&(i.callback=n),t=za(e,i,r),t!==null&&(gu(t,e,r),Ba(t,e,r))},enqueueReplaceState:function(e,t,n){e=e._reactInternals;var r=mu(),i=Ra(r);i.tag=1,i.payload=t,n!=null&&(i.callback=n),t=za(e,i,r),t!==null&&(gu(t,e,r),Ba(t,e,r))},enqueueForceUpdate:function(e,t){e=e._reactInternals;var n=mu(),r=Ra(n);r.tag=2,t!=null&&(r.callback=t),t=za(e,r,n),t!==null&&(gu(t,e,n),Ba(t,e,n))}};function Bs(e,t,n,r,i,a,o){return e=e.stateNode,typeof e.shouldComponentUpdate==`function`?e.shouldComponentUpdate(r,a,o):t.prototype&&t.prototype.isPureReactComponent?!_r(n,r)||!_r(i,a):!0}function Vs(e,t,n,r){e=t.state,typeof t.componentWillReceiveProps==`function`&&t.componentWillReceiveProps(n,r),typeof t.UNSAFE_componentWillReceiveProps==`function`&&t.UNSAFE_componentWillReceiveProps(n,r),t.state!==e&&zs.enqueueReplaceState(t,t.state,null)}function Hs(e,t){var n=t;if(`ref`in t)for(var r in n={},t)r!==`ref`&&(n[r]=t[r]);if(e=e.defaultProps)for(var i in n===t&&(n=p({},n)),e)n[i]===void 0&&(n[i]=e[i]);return n}function eee(e){Wr(e)}function Us(e){console.error(e)}function Ws(e){Wr(e)}function Gs(e,t){try{var n=e.onUncaughtError;n(t.value,{componentStack:t.stack})}catch(e){setTimeout(function(){throw e})}}function Ks(e,t,n){try{var r=e.onCaughtError;r(n.value,{componentStack:n.stack,errorBoundary:t.tag===1?t.stateNode:null})}catch(e){setTimeout(function(){throw e})}}function qs(e,t,n){return n=Ra(n),n.tag=3,n.payload={element:null},n.callback=function(){Gs(e,t)},n}function Js(e){return e=Ra(e),e.tag=3,e}function Ys(e,t,n,r){var i=n.type.getDerivedStateFromError;if(typeof i==`function`){var a=r.value;e.payload=function(){return i(a)},e.callback=function(){Ks(t,n,r)}}var o=n.stateNode;o!==null&&typeof o.componentDidCatch==`function`&&(e.callback=function(){Ks(t,n,r),typeof i!=`function`&&(iu===null?iu=new Set([this]):iu.add(this));var e=r.stack;this.componentDidCatch(r.value,{componentStack:e===null?``:e})})}function Xs(e,t,n,r,a){if(n.flags|=32768,typeof r==`object`&&r&&typeof r.then==`function`){if(t=n.alternate,t!==null&&qi(t,n,a,!0),n=Qa.current,n!==null){switch(n.tag){case 31:case 13:return $a===null?Ou():n.alternate===null&&Gl===0&&(Gl=3),n.flags&=-257,n.flags|=65536,n.lanes=a,r===ba?n.flags|=16384:(t=n.updateQueue,t===null?n.updateQueue=new Set([r]):t.add(r),qu(e,r,a)),!1;case 22:return n.flags|=65536,r===ba?n.flags|=16384:(t=n.updateQueue,t===null?(t={transitions:null,markerInstances:null,retryQueue:new Set([r])},n.updateQueue=t):(n=t.retryQueue,n===null?t.retryQueue=new Set([r]):n.add(r)),qu(e,r,a)),!1}throw Error(i(435,n.tag))}return qu(e,r,a),Ou(),!1}if(ki)return t=Qa.current,t===null?(r!==Mi&&(t=Error(i(423),{cause:r}),zi(fi(t,n))),e=e.current.alternate,e.flags|=65536,a&=-a,e.lanes|=a,r=fi(r,n),a=qs(e.stateNode,r,a),Va(e,a),Gl!==4&&(Gl=2)):(!(t.flags&65536)&&(t.flags|=256),t.flags|=65536,t.lanes=a,r!==Mi&&(e=Error(i(422),{cause:r}),zi(fi(e,n)))),!1;var o=Error(i(520),{cause:r});if(o=fi(o,n),Zl===null?Zl=[o]:Zl.push(o),Gl!==4&&(Gl=2),t===null)return!0;r=fi(r,n),n=t;do{switch(n.tag){case 3:return n.flags|=65536,e=a&-a,n.lanes|=e,e=qs(n.stateNode,r,e),Va(n,e),!1;case 1:if(t=n.type,o=n.stateNode,!(n.flags&128)&&(typeof t.getDerivedStateFromError==`function`||o!==null&&typeof o.componentDidCatch==`function`&&(iu===null||!iu.has(o))))return n.flags|=65536,a&=-a,n.lanes|=a,a=Js(a),Ys(a,e,n,r),Va(n,a),!1}n=n.return}while(n!==null);return!1}var Zs=Error(i(461)),Qs=!1;function $s(e,t,n,r){t.child=e===null?Pa(t,null,n,r):Na(t,e.child,n,r)}function ec(e,t,n,r,i){n=n.render;var a=t.ref;if(`ref`in r){var o={};for(var s in r)s!==`ref`&&(o[s]=r[s])}else o=r;return Yi(t),r=bo(e,t,n,o,a,i),s=wo(),e!==null&&!Qs?(K(e,t,i),wc(e,t,i)):(ki&&s&&wi(t),t.flags|=1,$s(e,t,r,i),t.child)}function tc(e,t,n,r,i){if(e===null){var a=n.type;return typeof a==`function`&&!ri(a)&&a.defaultProps===void 0&&n.compare===null?(t.tag=15,t.type=a,nc(e,t,a,r,i)):(e=oi(n.type,null,r,t,t.mode,i),e.ref=t.ref,e.return=t,t.child=e)}if(a=e.child,!Tc(e,i)){var o=a.memoizedProps;if(n=n.compare,n=n===null?_r:n,n(o,r)&&e.ref===t.ref)return wc(e,t,i)}return t.flags|=1,e=ii(a,r),e.ref=t.ref,e.return=t,t.child=e}function nc(e,t,n,r,i){if(e!==null){var a=e.memoizedProps;if(_r(a,r)&&e.ref===t.ref)if(Qs=!1,t.pendingProps=r=a,Tc(e,i))e.flags&131072&&(Qs=!0);else return t.lanes=e.lanes,wc(e,t,i)}return uc(e,t,n,r,i)}function rc(e,t,n,r){var i=r.children,a=e===null?null:e.memoizedState;if(e===null&&t.stateNode===null&&(t.stateNode={_visibility:1,_pendingMarkers:null,_retryCache:null,_transitions:null}),r.mode===`hidden`){if(t.flags&128){if(a=a===null?n:a.baseLanes|n,e!==null){for(r=t.child=e.child,i=0;r!==null;)i=i|r.lanes|r.childLanes,r=r.sibling;r=i&~a}else r=0,t.child=null;return ac(e,t,a,n,r)}if(n&536870912)t.memoizedState={baseLanes:0,cachePool:null},e!==null&&ha(t,a===null?null:a.cachePool),a===null?Xa():Ya(t,a),no(t);else return r=t.lanes=536870912,ac(e,t,a===null?n:a.baseLanes|n,n,r)}else a===null?(e!==null&&ha(t,null),Xa(),ro(t)):(ha(t,a.cachePool),Ya(t,a),ro(t),t.memoizedState=null);return $s(e,t,i,n),t.child}function ic(e,t){return e!==null&&e.tag===22||t.stateNode!==null||(t.stateNode={_visibility:1,_pendingMarkers:null,_retryCache:null,_transitions:null}),t.sibling}function ac(e,t,n,r,i){var a=ma();return a=a===null?null:{parent:na._currentValue,pool:a},t.memoizedState={baseLanes:n,cachePool:a},e!==null&&ha(t,null),Xa(),no(t),e!==null&&qi(e,t,r,!0),t.childLanes=i,null}function oc(e,t){return t=yc({mode:t.mode,children:t.children},e.mode),t.ref=e.ref,e.child=t,t.return=e,t}function sc(e,t,n){return Na(t,e.child,null,n),e=oc(t,t.pendingProps),e.flags|=2,io(t),t.memoizedState=null,e}function cc(e,t,n){var r=t.pendingProps,a=(t.flags&128)!=0;if(t.flags&=-129,e===null){if(ki){if(r.mode===`hidden`)return e=oc(t,r),t.lanes=536870912,ic(null,e);if(to(t),(e=Oi)?(e=rf(e,ji),e=e!==null&&e.data===`&`?e:null,e!==null&&(t.memoizedState={dehydrated:e,treeContext:yi===null?null:{id:bi,overflow:xi},retryLane:536870912,hydrationErrors:null},n=li(e),n.return=t,t.child=n,Di=t,Oi=null)):e=null,e===null)throw Ni(t);return t.lanes=536870912,null}return oc(t,r)}var o=e.memoizedState;if(o!==null){var s=o.dehydrated;if(to(t),a)if(t.flags&256)t.flags&=-257,t=sc(e,t,n);else if(t.memoizedState!==null)t.child=e.child,t.flags|=128,t=null;else throw Error(i(558));else if(Qs||qi(e,t,n,!1),a=(n&e.childLanes)!==0,Qs||a){if(r=Il,r!==null&&(s=Xe(r,n),s!==0&&s!==o.retryLane))throw o.retryLane=s,Zr(e,s),gu(r,e,s),Zs;Ou(),t=sc(e,t,n)}else e=o.treeContext,Oi=cf(s.nextSibling),Di=t,ki=!0,Ai=null,ji=!1,e!==null&&Ei(t,e),t=oc(t,r),t.flags|=4096;return t}return e=ii(e.child,{mode:r.mode,children:r.children}),e.ref=t.ref,t.child=e,e.return=t,e}function lc(e,t){var n=t.ref;if(n===null)e!==null&&e.ref!==null&&(t.flags|=4194816);else{if(typeof n!=`function`&&typeof n!=`object`)throw Error(i(284));(e===null||e.ref!==n)&&(t.flags|=4194816)}}function uc(e,t,n,r,i){return Yi(t),n=bo(e,t,n,r,void 0,i),r=wo(),e!==null&&!Qs?(K(e,t,i),wc(e,t,i)):(ki&&r&&wi(t),t.flags|=1,$s(e,t,n,i),t.child)}function dc(e,t,n,r,i,a){return Yi(t),t.updateQueue=null,n=So(t,r,n,i),xo(e),r=wo(),e!==null&&!Qs?(K(e,t,a),wc(e,t,a)):(ki&&r&&wi(t),t.flags|=1,$s(e,t,n,a),t.child)}function fc(e,t,n,r,i){if(Yi(t),t.stateNode===null){var a=ei,o=n.contextType;typeof o==`object`&&o&&(a=Xi(o)),a=new n(r,a),t.memoizedState=a.state!==null&&a.state!==void 0?a.state:null,a.updater=zs,t.stateNode=a,a._reactInternals=t,a=t.stateNode,a.props=r,a.state=t.memoizedState,a.refs={},Ia(t),o=n.contextType,a.context=typeof o==`object`&&o?Xi(o):ei,a.state=t.memoizedState,o=n.getDerivedStateFromProps,typeof o==`function`&&(Rs(t,n,o,r),a.state=t.memoizedState),typeof n.getDerivedStateFromProps==`function`||typeof a.getSnapshotBeforeUpdate==`function`||typeof a.UNSAFE_componentWillMount!=`function`&&typeof a.componentWillMount!=`function`||(o=a.state,typeof a.componentWillMount==`function`&&a.componentWillMount(),typeof a.UNSAFE_componentWillMount==`function`&&a.UNSAFE_componentWillMount(),o!==a.state&&zs.enqueueReplaceState(a,a.state,null),Wa(t,r,a,i),Ua(),a.state=t.memoizedState),typeof a.componentDidMount==`function`&&(t.flags|=4194308),r=!0}else if(e===null){a=t.stateNode;var s=t.memoizedProps,c=Hs(n,s);a.props=c;var l=a.context,u=n.contextType;o=ei,typeof u==`object`&&u&&(o=Xi(u));var d=n.getDerivedStateFromProps;u=typeof d==`function`||typeof a.getSnapshotBeforeUpdate==`function`,s=t.pendingProps!==s,u||typeof a.UNSAFE_componentWillReceiveProps!=`function`&&typeof a.componentWillReceiveProps!=`function`||(s||l!==o)&&Vs(t,a,r,o),Fa=!1;var f=t.memoizedState;a.state=f,Wa(t,r,a,i),Ua(),l=t.memoizedState,s||f!==l||Fa?(typeof d==`function`&&(Rs(t,n,d,r),l=t.memoizedState),(c=Fa||Bs(t,n,c,r,f,l,o))?(u||typeof a.UNSAFE_componentWillMount!=`function`&&typeof a.componentWillMount!=`function`||(typeof a.componentWillMount==`function`&&a.componentWillMount(),typeof a.UNSAFE_componentWillMount==`function`&&a.UNSAFE_componentWillMount()),typeof a.componentDidMount==`function`&&(t.flags|=4194308)):(typeof a.componentDidMount==`function`&&(t.flags|=4194308),t.memoizedProps=r,t.memoizedState=l),a.props=r,a.state=l,a.context=o,r=c):(typeof a.componentDidMount==`function`&&(t.flags|=4194308),r=!1)}else{a=t.stateNode,La(e,t),o=t.memoizedProps,u=Hs(n,o),a.props=u,d=t.pendingProps,f=a.context,l=n.contextType,c=ei,typeof l==`object`&&l&&(c=Xi(l)),s=n.getDerivedStateFromProps,(l=typeof s==`function`||typeof a.getSnapshotBeforeUpdate==`function`)||typeof a.UNSAFE_componentWillReceiveProps!=`function`&&typeof a.componentWillReceiveProps!=`function`||(o!==d||f!==c)&&Vs(t,a,r,c),Fa=!1,f=t.memoizedState,a.state=f,Wa(t,r,a,i),Ua();var p=t.memoizedState;o!==d||f!==p||Fa||e!==null&&e.dependencies!==null&&Ji(e.dependencies)?(typeof s==`function`&&(Rs(t,n,s,r),p=t.memoizedState),(u=Fa||Bs(t,n,u,r,f,p,c)||e!==null&&e.dependencies!==null&&Ji(e.dependencies))?(l||typeof a.UNSAFE_componentWillUpdate!=`function`&&typeof a.componentWillUpdate!=`function`||(typeof a.componentWillUpdate==`function`&&a.componentWillUpdate(r,p,c),typeof a.UNSAFE_componentWillUpdate==`function`&&a.UNSAFE_componentWillUpdate(r,p,c)),typeof a.componentDidUpdate==`function`&&(t.flags|=4),typeof a.getSnapshotBeforeUpdate==`function`&&(t.flags|=1024)):(typeof a.componentDidUpdate!=`function`||o===e.memoizedProps&&f===e.memoizedState||(t.flags|=4),typeof a.getSnapshotBeforeUpdate!=`function`||o===e.memoizedProps&&f===e.memoizedState||(t.flags|=1024),t.memoizedProps=r,t.memoizedState=p),a.props=r,a.state=p,a.context=c,r=u):(typeof a.componentDidUpdate!=`function`||o===e.memoizedProps&&f===e.memoizedState||(t.flags|=4),typeof a.getSnapshotBeforeUpdate!=`function`||o===e.memoizedProps&&f===e.memoizedState||(t.flags|=1024),r=!1)}return a=r,lc(e,t),r=(t.flags&128)!=0,a||r?(a=t.stateNode,n=r&&typeof n.getDerivedStateFromError!=`function`?null:a.render(),t.flags|=1,e!==null&&r?(t.child=Na(t,e.child,null,i),t.child=Na(t,null,n,i)):$s(e,t,n,i),t.memoizedState=a.state,e=t.child):e=wc(e,t,i),e}function pc(e,t,n,r){return Li(),t.flags|=256,$s(e,t,n,r),t.child}var mc={dehydrated:null,treeContext:null,retryLane:0,hydrationErrors:null};function hc(e){return{baseLanes:e,cachePool:ga()}}function gc(e,t,n){return e=e===null?0:e.childLanes&~n,t&&(e|=Yl),e}function _c(e,t,n){var r=t.pendingProps,a=!1,o=(t.flags&128)!=0,s;if((s=o)||(s=e!==null&&e.memoizedState===null?!1:(ao.current&2)!=0),s&&(a=!0,t.flags&=-129),s=(t.flags&32)!=0,t.flags&=-33,e===null){if(ki){if(a?eo(t):ro(t),(e=Oi)?(e=rf(e,ji),e=e!==null&&e.data!==`&`?e:null,e!==null&&(t.memoizedState={dehydrated:e,treeContext:yi===null?null:{id:bi,overflow:xi},retryLane:536870912,hydrationErrors:null},n=li(e),n.return=t,t.child=n,Di=t,Oi=null)):e=null,e===null)throw Ni(t);return of(e)?t.lanes=32:t.lanes=536870912,null}var c=r.children;return r=r.fallback,a?(ro(t),a=t.mode,c=yc({mode:`hidden`,children:c},a),r=si(r,a,n,null),c.return=t,r.return=t,c.sibling=r,t.child=c,r=t.child,r.memoizedState=hc(n),r.childLanes=gc(e,s,n),t.memoizedState=mc,ic(null,r)):(eo(t),vc(t,c))}var l=e.memoizedState;if(l!==null&&(c=l.dehydrated,c!==null)){if(o)t.flags&256?(eo(t),t.flags&=-257,t=bc(e,t,n)):t.memoizedState===null?(ro(t),c=r.fallback,a=t.mode,r=yc({mode:`visible`,children:r.children},a),c=si(c,a,n,null),c.flags|=2,r.return=t,c.return=t,r.sibling=c,t.child=r,Na(t,e.child,null,n),r=t.child,r.memoizedState=hc(n),r.childLanes=gc(e,s,n),t.memoizedState=mc,t=ic(null,r)):(ro(t),t.child=e.child,t.flags|=128,t=null);else if(eo(t),of(c)){if(s=c.nextSibling&&c.nextSibling.dataset,s)var u=s.dgst;s=u,r=Error(i(419)),r.stack=``,r.digest=s,zi({value:r,source:null,stack:null}),t=bc(e,t,n)}else if(Qs||qi(e,t,n,!1),s=(n&e.childLanes)!==0,Qs||s){if(s=Il,s!==null&&(r=Xe(s,n),r!==0&&r!==l.retryLane))throw l.retryLane=r,Zr(e,r),gu(s,e,r),Zs;af(c)||Ou(),t=bc(e,t,n)}else af(c)?(t.flags|=192,t.child=e.child,t=null):(e=l.treeContext,Oi=cf(c.nextSibling),Di=t,ki=!0,Ai=null,ji=!1,e!==null&&Ei(t,e),t=vc(t,r.children),t.flags|=4096);return t}return a?(ro(t),c=r.fallback,a=t.mode,l=e.child,u=l.sibling,r=ii(l,{mode:`hidden`,children:r.children}),r.subtreeFlags=l.subtreeFlags&65011712,u===null?(c=si(c,a,n,null),c.flags|=2):c=ii(u,c),c.return=t,r.return=t,r.sibling=c,t.child=r,ic(null,r),r=t.child,c=e.child.memoizedState,c===null?c=hc(n):(a=c.cachePool,a===null?a=ga():(l=na._currentValue,a=a.parent===l?a:{parent:l,pool:l}),c={baseLanes:c.baseLanes|n,cachePool:a}),r.memoizedState=c,r.childLanes=gc(e,s,n),t.memoizedState=mc,ic(e.child,r)):(eo(t),n=e.child,e=n.sibling,n=ii(n,{mode:`visible`,children:r.children}),n.return=t,n.sibling=null,e!==null&&(s=t.deletions,s===null?(t.deletions=[e],t.flags|=16):s.push(e)),t.child=n,t.memoizedState=null,n)}function vc(e,t){return t=yc({mode:`visible`,children:t},e.mode),t.return=e,e.child=t}function yc(e,t){return e=ni(22,e,null,t),e.lanes=0,e}function bc(e,t,n){return Na(t,e.child,null,n),e=vc(t,t.pendingProps.children),e.flags|=2,t.memoizedState=null,e}function xc(e,t,n){e.lanes|=t;var r=e.alternate;r!==null&&(r.lanes|=t),Gi(e.return,t,n)}function Sc(e,t,n,r,i,a){var o=e.memoizedState;o===null?e.memoizedState={isBackwards:t,rendering:null,renderingStartTime:0,last:r,tail:n,tailMode:i,treeForkCount:a}:(o.isBackwards=t,o.rendering=null,o.renderingStartTime=0,o.last=r,o.tail=n,o.tailMode=i,o.treeForkCount=a)}function Cc(e,t,n){var r=t.pendingProps,i=r.revealOrder,a=r.tail;r=r.children;var o=ao.current,s=(o&2)!=0;if(s?(o=o&1|2,t.flags|=128):o&=1,te(ao,o),$s(e,t,r,n),r=ki?gi:0,!s&&e!==null&&e.flags&128)a:for(e=t.child;e!==null;){if(e.tag===13)e.memoizedState!==null&&xc(e,n,t);else if(e.tag===19)xc(e,n,t);else if(e.child!==null){e.child.return=e,e=e.child;continue}if(e===t)break a;for(;e.sibling===null;){if(e.return===null||e.return===t)break a;e=e.return}e.sibling.return=e.return,e=e.sibling}switch(i){case`forwards`:for(n=t.child,i=null;n!==null;)e=n.alternate,e!==null&&oo(e)===null&&(i=n),n=n.sibling;n=i,n===null?(i=t.child,t.child=null):(i=n.sibling,n.sibling=null),Sc(t,!1,i,n,a,r);break;case`backwards`:case`unstable_legacy-backwards`:for(n=null,i=t.child,t.child=null;i!==null;){if(e=i.alternate,e!==null&&oo(e)===null){t.child=i;break}e=i.sibling,i.sibling=n,n=i,i=e}Sc(t,!0,n,null,a,r);break;case`together`:Sc(t,!1,null,null,void 0,r);break;default:t.memoizedState=null}return t.child}function wc(e,t,n){if(e!==null&&(t.dependencies=e.dependencies),Kl|=t.lanes,(n&t.childLanes)===0)if(e!==null){if(qi(e,t,n,!1),(n&t.childLanes)===0)return null}else return null;if(e!==null&&t.child!==e.child)throw Error(i(153));if(t.child!==null){for(e=t.child,n=ii(e,e.pendingProps),t.child=n,n.return=t;e.sibling!==null;)e=e.sibling,n=n.sibling=ii(e,e.pendingProps),n.return=t;n.sibling=null}return t.child}function Tc(e,t){return(e.lanes&t)===0?(e=e.dependencies,!!(e!==null&&Ji(e))):!0}function Ec(e,t,n){switch(t.tag){case 3:oe(t,t.stateNode.containerInfo),Ui(t,na,e.memoizedState.cache),Li();break;case 27:case 5:H(t);break;case 4:oe(t,t.stateNode.containerInfo);break;case 10:Ui(t,t.type,t.memoizedProps.value);break;case 31:if(t.memoizedState!==null)return t.flags|=128,to(t),null;break;case 13:var r=t.memoizedState;if(r!==null)return r.dehydrated===null?(n&t.child.childLanes)===0?(eo(t),e=wc(e,t,n),e===null?null:e.sibling):_c(e,t,n):(eo(t),t.flags|=128,null);eo(t);break;case 19:var i=(e.flags&128)!=0;if(r=(n&t.childLanes)!==0,r||=(qi(e,t,n,!1),(n&t.childLanes)!==0),i){if(r)return Cc(e,t,n);t.flags|=128}if(i=t.memoizedState,i!==null&&(i.rendering=null,i.tail=null,i.lastEffect=null),te(ao,ao.current),r)break;return null;case 22:return t.lanes=0,rc(e,t,n,t.pendingProps);case 24:Ui(t,na,e.memoizedState.cache)}return wc(e,t,n)}function Dc(e,t,n){if(e!==null)if(e.memoizedProps!==t.pendingProps)Qs=!0;else{if(!Tc(e,n)&&!(t.flags&128))return Qs=!1,Ec(e,t,n);Qs=!!(e.flags&131072)}else Qs=!1,ki&&t.flags&1048576&&Ci(t,gi,t.index);switch(t.lanes=0,t.tag){case 16:a:{var r=t.pendingProps;if(e=Ca(t.elementType),t.type=e,typeof e==`function`)ri(e)?(r=Hs(e,r),t.tag=1,t=fc(null,t,e,r,n)):(t.tag=0,t=uc(null,t,e,r,n));else{if(e!=null){var a=e.$$typeof;if(a===w){t.tag=11,t=ec(null,t,e,r,n);break a}else if(a===D){t.tag=14,t=tc(null,t,e,r,n);break a}}throw t=P(e)||e,Error(i(306,t,``))}}return t;case 0:return uc(e,t,t.type,t.pendingProps,n);case 1:return r=t.type,a=Hs(r,t.pendingProps),fc(e,t,r,a,n);case 3:a:{if(oe(t,t.stateNode.containerInfo),e===null)throw Error(i(387));r=t.pendingProps;var o=t.memoizedState;a=o.element,La(e,t),Wa(t,r,null,n);var s=t.memoizedState;if(r=s.cache,Ui(t,na,r),r!==o.cache&&Ki(t,[na],n,!0),Ua(),r=s.element,o.isDehydrated)if(o={element:r,isDehydrated:!1,cache:s.cache},t.updateQueue.baseState=o,t.memoizedState=o,t.flags&256){t=pc(e,t,r,n);break a}else if(r!==a){a=fi(Error(i(424)),t),zi(a),t=pc(e,t,r,n);break a}else{switch(e=t.stateNode.containerInfo,e.nodeType){case 9:e=e.body;break;default:e=e.nodeName===`HTML`?e.ownerDocument.body:e}for(Oi=cf(e.firstChild),Di=t,ki=!0,Ai=null,ji=!0,n=Pa(t,null,r,n),t.child=n;n;)n.flags=n.flags&-3|4096,n=n.sibling}else{if(Li(),r===a){t=wc(e,t,n);break a}$s(e,t,r,n)}t=t.child}return t;case 26:return lc(e,t),e===null?(n=Of(t.type,null,t.pendingProps,null))?t.memoizedState=n:ki||(n=t.type,e=t.pendingProps,r=Vd(ie.current).createElement(n),r[tt]=t,r[nt]=e,Fd(r,n,e),mt(r),t.stateNode=r):t.memoizedState=Of(t.type,e.memoizedProps,t.pendingProps,e.memoizedState),null;case 27:return H(t),e===null&&ki&&(r=t.stateNode=ff(t.type,t.pendingProps,ie.current),Di=t,ji=!0,a=Oi,Qd(t.type)?(lf=a,Oi=cf(r.firstChild)):Oi=a),$s(e,t,t.pendingProps.children,n),lc(e,t),e===null&&(t.flags|=4194304),t.child;case 5:return e===null&&ki&&((a=r=Oi)&&(r=nf(r,t.type,t.pendingProps,ji),r===null?a=!1:(t.stateNode=r,Di=t,Oi=cf(r.firstChild),ji=!1,a=!0)),a||Ni(t)),H(t),a=t.type,o=t.pendingProps,s=e===null?null:e.memoizedProps,r=o.children,Wd(a,o)?r=null:s!==null&&Wd(a,s)&&(t.flags|=32),t.memoizedState!==null&&(a=bo(e,t,Co,null,null,n),Zf._currentValue=a),lc(e,t),$s(e,t,r,n),t.child;case 6:return e===null&&ki&&((e=n=Oi)&&(n=Q(n,t.pendingProps,ji),n===null?e=!1:(t.stateNode=n,Di=t,Oi=null,e=!0)),e||Ni(t)),null;case 13:return _c(e,t,n);case 4:return oe(t,t.stateNode.containerInfo),r=t.pendingProps,e===null?t.child=Na(t,null,r,n):$s(e,t,r,n),t.child;case 11:return ec(e,t,t.type,t.pendingProps,n);case 7:return $s(e,t,t.pendingProps,n),t.child;case 8:return $s(e,t,t.pendingProps.children,n),t.child;case 12:return $s(e,t,t.pendingProps.children,n),t.child;case 10:return r=t.pendingProps,Ui(t,t.type,r.value),$s(e,t,r.children,n),t.child;case 9:return a=t.type._context,r=t.pendingProps.children,Yi(t),a=Xi(a),r=r(a),t.flags|=1,$s(e,t,r,n),t.child;case 14:return tc(e,t,t.type,t.pendingProps,n);case 15:return nc(e,t,t.type,t.pendingProps,n);case 19:return Cc(e,t,n);case 31:return cc(e,t,n);case 22:return rc(e,t,n,t.pendingProps);case 24:return Yi(t),r=Xi(na),e===null?(a=ma(),a===null&&(a=Il,o=ra(),a.pooledCache=o,o.refCount++,o!==null&&(a.pooledCacheLanes|=n),a=o),t.memoizedState={parent:r,cache:a},Ia(t),Ui(t,na,a)):((e.lanes&n)!==0&&(La(e,t),Wa(t,null,null,n),Ua()),a=e.memoizedState,o=t.memoizedState,a.parent===r?(r=o.cache,Ui(t,na,r),r!==a.cache&&Ki(t,[na],n,!0)):(a={parent:r,cache:r},t.memoizedState=a,t.lanes===0&&(t.memoizedState=t.updateQueue.baseState=a),Ui(t,na,r))),$s(e,t,t.pendingProps.children,n),t.child;case 29:throw t.pendingProps}throw Error(i(156,t.tag))}function Oc(e){e.flags|=4}function kc(e,t,n,r,i){if((t=(e.mode&32)!=0)&&(t=!1),t){if(e.flags|=16777216,(i&335544128)===i)if(e.stateNode.complete)e.flags|=8192;else if(Tu())e.flags|=8192;else throw wa=ba,va}else e.flags&=-16777217}function Ac(e,t){if(t.type!==`stylesheet`||t.state.loading&4)e.flags&=-16777217;else if(e.flags|=16777216,!Uf(t))if(Tu())e.flags|=8192;else throw wa=ba,va}function jc(e,t){t!==null&&(e.flags|=4),e.flags&16384&&(t=e.tag===22?536870912:We(),e.lanes|=t,Xl|=t)}function Mc(e,t){if(!ki)switch(e.tailMode){case`hidden`:t=e.tail;for(var n=null;t!==null;)t.alternate!==null&&(n=t),t=t.sibling;n===null?e.tail=null:n.sibling=null;break;case`collapsed`:n=e.tail;for(var r=null;n!==null;)n.alternate!==null&&(r=n),n=n.sibling;r===null?t||e.tail===null?e.tail=null:e.tail.sibling=null:r.sibling=null}}function Nc(e){var t=e.alternate!==null&&e.alternate.child===e.child,n=0,r=0;if(t)for(var i=e.child;i!==null;)n|=i.lanes|i.childLanes,r|=i.subtreeFlags&65011712,r|=i.flags&65011712,i.return=e,i=i.sibling;else for(i=e.child;i!==null;)n|=i.lanes|i.childLanes,r|=i.subtreeFlags,r|=i.flags,i.return=e,i=i.sibling;return e.subtreeFlags|=r,e.childLanes=n,t}function Pc(e,t,n){var r=t.pendingProps;switch(Ti(t),t.tag){case 16:case 15:case 0:case 11:case 7:case 8:case 12:case 9:case 14:return Nc(t),null;case 1:return Nc(t),null;case 3:return n=t.stateNode,r=null,e!==null&&(r=e.memoizedState.cache),t.memoizedState.cache!==r&&(t.flags|=2048),Wi(na),se(),n.pendingContext&&(n.context=n.pendingContext,n.pendingContext=null),(e===null||e.child===null)&&(Ii(t)?Oc(t):e===null||e.memoizedState.isDehydrated&&!(t.flags&256)||(t.flags|=1024,Ri())),Nc(t),null;case 26:var a=t.type,o=t.memoizedState;return e===null?(Oc(t),o===null?(Nc(t),kc(t,a,null,r,n)):(Nc(t),Ac(t,o))):o?o===e.memoizedState?(Nc(t),t.flags&=-16777217):(Oc(t),Nc(t),Ac(t,o)):(e=e.memoizedProps,e!==r&&Oc(t),Nc(t),kc(t,a,e,r,n)),null;case 27:if(ce(t),n=ie.current,a=t.type,e!==null&&t.stateNode!=null)e.memoizedProps!==r&&Oc(t);else{if(!r){if(t.stateNode===null)throw Error(i(166));return Nc(t),null}e=ne.current,Ii(t)?Pi(t,e):(e=ff(a,r,n),t.stateNode=e,Oc(t))}return Nc(t),null;case 5:if(ce(t),a=t.type,e!==null&&t.stateNode!=null)e.memoizedProps!==r&&Oc(t);else{if(!r){if(t.stateNode===null)throw Error(i(166));return Nc(t),null}if(o=ne.current,Ii(t))Pi(t,o);else{var s=Vd(ie.current);switch(o){case 1:o=s.createElementNS(`http://www.w3.org/2000/svg`,a);break;case 2:o=s.createElementNS(`http://www.w3.org/1998/Math/MathML`,a);break;default:switch(a){case`svg`:o=s.createElementNS(`http://www.w3.org/2000/svg`,a);break;case`math`:o=s.createElementNS(`http://www.w3.org/1998/Math/MathML`,a);break;case`script`:o=s.createElement(`div`),o.innerHTML=`<script><\/script>`,o=o.removeChild(o.firstChild);break;case`select`:o=typeof r.is==`string`?s.createElement(`select`,{is:r.is}):s.createElement(`select`),r.multiple?o.multiple=!0:r.size&&(o.size=r.size);break;default:o=typeof r.is==`string`?s.createElement(a,{is:r.is}):s.createElement(a)}}o[tt]=t,o[nt]=r;a:for(s=t.child;s!==null;){if(s.tag===5||s.tag===6)o.appendChild(s.stateNode);else if(s.tag!==4&&s.tag!==27&&s.child!==null){s.child.return=s,s=s.child;continue}if(s===t)break a;for(;s.sibling===null;){if(s.return===null||s.return===t)break a;s=s.return}s.sibling.return=s.return,s=s.sibling}t.stateNode=o;a:switch(Fd(o,a,r),a){case`button`:case`input`:case`select`:case`textarea`:r=!!r.autoFocus;break a;case`img`:r=!0;break a;default:r=!1}r&&Oc(t)}}return Nc(t),kc(t,t.type,e===null?null:e.memoizedProps,t.pendingProps,n),null;case 6:if(e&&t.stateNode!=null)e.memoizedProps!==r&&Oc(t);else{if(typeof r!=`string`&&t.stateNode===null)throw Error(i(166));if(e=ie.current,Ii(t)){if(e=t.stateNode,n=t.memoizedProps,r=null,a=Di,a!==null)switch(a.tag){case 27:case 5:r=a.memoizedProps}e[tt]=t,e=!!(e.nodeValue===n||r!==null&&!0===r.suppressHydrationWarning||Md(e.nodeValue,n)),e||Ni(t,!0)}else e=Vd(e).createTextNode(r),e[tt]=t,t.stateNode=e}return Nc(t),null;case 31:if(n=t.memoizedState,e===null||e.memoizedState!==null){if(r=Ii(t),n!==null){if(e===null){if(!r)throw Error(i(318));if(e=t.memoizedState,e=e===null?null:e.dehydrated,!e)throw Error(i(557));e[tt]=t}else Li(),!(t.flags&128)&&(t.memoizedState=null),t.flags|=4;Nc(t),e=!1}else n=Ri(),e!==null&&e.memoizedState!==null&&(e.memoizedState.hydrationErrors=n),e=!0;if(!e)return t.flags&256?(io(t),t):(io(t),null);if(t.flags&128)throw Error(i(558))}return Nc(t),null;case 13:if(r=t.memoizedState,e===null||e.memoizedState!==null&&e.memoizedState.dehydrated!==null){if(a=Ii(t),r!==null&&r.dehydrated!==null){if(e===null){if(!a)throw Error(i(318));if(a=t.memoizedState,a=a===null?null:a.dehydrated,!a)throw Error(i(317));a[tt]=t}else Li(),!(t.flags&128)&&(t.memoizedState=null),t.flags|=4;Nc(t),a=!1}else a=Ri(),e!==null&&e.memoizedState!==null&&(e.memoizedState.hydrationErrors=a),a=!0;if(!a)return t.flags&256?(io(t),t):(io(t),null)}return io(t),t.flags&128?(t.lanes=n,t):(n=r!==null,e=e!==null&&e.memoizedState!==null,n&&(r=t.child,a=null,r.alternate!==null&&r.alternate.memoizedState!==null&&r.alternate.memoizedState.cachePool!==null&&(a=r.alternate.memoizedState.cachePool.pool),o=null,r.memoizedState!==null&&r.memoizedState.cachePool!==null&&(o=r.memoizedState.cachePool.pool),o!==a&&(r.flags|=2048)),n!==e&&n&&(t.child.flags|=8192),jc(t,t.updateQueue),Nc(t),null);case 4:return se(),e===null&&Cd(t.stateNode.containerInfo),Nc(t),null;case 10:return Wi(t.type),Nc(t),null;case 19:if(ee(ao),r=t.memoizedState,r===null)return Nc(t),null;if(a=(t.flags&128)!=0,o=r.rendering,o===null)if(a)Mc(r,!1);else{if(Gl!==0||e!==null&&e.flags&128)for(e=t.child;e!==null;){if(o=oo(e),o!==null){for(t.flags|=128,Mc(r,!1),e=o.updateQueue,t.updateQueue=e,jc(t,e),t.subtreeFlags=0,e=n,n=t.child;n!==null;)ai(n,e),n=n.sibling;return te(ao,ao.current&1|2),ki&&Si(t,r.treeForkCount),t.child}e=e.sibling}r.tail!==null&&xe()>nu&&(t.flags|=128,a=!0,Mc(r,!1),t.lanes=4194304)}else{if(!a)if(e=oo(o),e!==null){if(t.flags|=128,a=!0,e=e.updateQueue,t.updateQueue=e,jc(t,e),Mc(r,!0),r.tail===null&&r.tailMode===`hidden`&&!o.alternate&&!ki)return Nc(t),null}else 2*xe()-r.renderingStartTime>nu&&n!==536870912&&(t.flags|=128,a=!0,Mc(r,!1),t.lanes=4194304);r.isBackwards?(o.sibling=t.child,t.child=o):(e=r.last,e===null?t.child=o:e.sibling=o,r.last=o)}return r.tail===null?(Nc(t),null):(e=r.tail,r.rendering=e,r.tail=e.sibling,r.renderingStartTime=xe(),e.sibling=null,n=ao.current,te(ao,a?n&1|2:n&1),ki&&Si(t,r.treeForkCount),e);case 22:case 23:return io(t),Za(),r=t.memoizedState!==null,e===null?r&&(t.flags|=8192):e.memoizedState!==null!==r&&(t.flags|=8192),r?n&536870912&&!(t.flags&128)&&(Nc(t),t.subtreeFlags&6&&(t.flags|=8192)):Nc(t),n=t.updateQueue,n!==null&&jc(t,n.retryQueue),n=null,e!==null&&e.memoizedState!==null&&e.memoizedState.cachePool!==null&&(n=e.memoizedState.cachePool.pool),r=null,t.memoizedState!==null&&t.memoizedState.cachePool!==null&&(r=t.memoizedState.cachePool.pool),r!==n&&(t.flags|=2048),e!==null&&ee(pa),null;case 24:return n=null,e!==null&&(n=e.memoizedState.cache),t.memoizedState.cache!==n&&(t.flags|=2048),Wi(na),Nc(t),null;case 25:return null;case 30:return null}throw Error(i(156,t.tag))}function Fc(e,t){switch(Ti(t),t.tag){case 1:return e=t.flags,e&65536?(t.flags=e&-65537|128,t):null;case 3:return Wi(na),se(),e=t.flags,e&65536&&!(e&128)?(t.flags=e&-65537|128,t):null;case 26:case 27:case 5:return ce(t),null;case 31:if(t.memoizedState!==null){if(io(t),t.alternate===null)throw Error(i(340));Li()}return e=t.flags,e&65536?(t.flags=e&-65537|128,t):null;case 13:if(io(t),e=t.memoizedState,e!==null&&e.dehydrated!==null){if(t.alternate===null)throw Error(i(340));Li()}return e=t.flags,e&65536?(t.flags=e&-65537|128,t):null;case 19:return ee(ao),null;case 4:return se(),null;case 10:return Wi(t.type),null;case 22:case 23:return io(t),Za(),e!==null&&ee(pa),e=t.flags,e&65536?(t.flags=e&-65537|128,t):null;case 24:return Wi(na),null;case 25:return null;default:return null}}function Ic(e,t){switch(Ti(t),t.tag){case 3:Wi(na),se();break;case 26:case 27:case 5:ce(t);break;case 4:se();break;case 31:t.memoizedState!==null&&io(t);break;case 13:io(t);break;case 19:ee(ao);break;case 10:Wi(t.type);break;case 22:case 23:io(t),Za(),e!==null&&ee(pa);break;case 24:Wi(na)}}function Lc(e,t){try{var n=t.updateQueue,r=n===null?null:n.lastEffect;if(r!==null){var i=r.next;n=i;do{if((n.tag&e)===e){r=void 0;var a=n.create,o=n.inst;r=a(),o.destroy=r}n=n.next}while(n!==i)}}catch(e){Ku(t,t.return,e)}}function Rc(e,t,n){try{var r=t.updateQueue,i=r===null?null:r.lastEffect;if(i!==null){var a=i.next;r=a;do{if((r.tag&e)===e){var o=r.inst,s=o.destroy;if(s!==void 0){o.destroy=void 0,i=t;var c=n,l=s;try{l()}catch(e){Ku(i,c,e)}}}r=r.next}while(r!==a)}}catch(e){Ku(t,t.return,e)}}function zc(e){var t=e.updateQueue;if(t!==null){var n=e.stateNode;try{Ka(t,n)}catch(t){Ku(e,e.return,t)}}}function Bc(e,t,n){n.props=Hs(e.type,e.memoizedProps),n.state=e.memoizedState;try{n.componentWillUnmount()}catch(n){Ku(e,t,n)}}function Vc(e,t){try{var n=e.ref;if(n!==null){switch(e.tag){case 26:case 27:case 5:var r=e.stateNode;break;case 30:r=e.stateNode;break;default:r=e.stateNode}typeof n==`function`?e.refCleanup=n(r):n.current=r}}catch(n){Ku(e,t,n)}}function Hc(e,t){var n=e.ref,r=e.refCleanup;if(n!==null)if(typeof r==`function`)try{r()}catch(n){Ku(e,t,n)}finally{e.refCleanup=null,e=e.alternate,e!=null&&(e.refCleanup=null)}else if(typeof n==`function`)try{n(null)}catch(n){Ku(e,t,n)}else n.current=null}function Uc(e){var t=e.type,n=e.memoizedProps,r=e.stateNode;try{a:switch(t){case`button`:case`input`:case`select`:case`textarea`:n.autoFocus&&r.focus();break a;case`img`:n.src?r.src=n.src:n.srcSet&&(r.srcset=n.srcSet)}}catch(t){Ku(e,e.return,t)}}function Wc(e,t,n){try{var r=e.stateNode;Id(r,e.type,n,t),r[nt]=t}catch(t){Ku(e,e.return,t)}}function Gc(e){return e.tag===5||e.tag===3||e.tag===26||e.tag===27&&Qd(e.type)||e.tag===4}function Kc(e){a:for(;;){for(;e.sibling===null;){if(e.return===null||Gc(e.return))return null;e=e.return}for(e.sibling.return=e.return,e=e.sibling;e.tag!==5&&e.tag!==6&&e.tag!==18;){if(e.tag===27&&Qd(e.type)||e.flags&2||e.child===null||e.tag===4)continue a;e.child.return=e,e=e.child}if(!(e.flags&2))return e.stateNode}}function qc(e,t,n){var r=e.tag;if(r===5||r===6)e=e.stateNode,t?(n.nodeType===9?n.body:n.nodeName===`HTML`?n.ownerDocument.body:n).insertBefore(e,t):(t=n.nodeType===9?n.body:n.nodeName===`HTML`?n.ownerDocument.body:n,t.appendChild(e),n=n._reactRootContainer,n!=null||t.onclick!==null||(t.onclick=Jt));else if(r!==4&&(r===27&&Qd(e.type)&&(n=e.stateNode,t=null),e=e.child,e!==null))for(qc(e,t,n),e=e.sibling;e!==null;)qc(e,t,n),e=e.sibling}function Jc(e,t,n){var r=e.tag;if(r===5||r===6)e=e.stateNode,t?n.insertBefore(e,t):n.appendChild(e);else if(r!==4&&(r===27&&Qd(e.type)&&(n=e.stateNode),e=e.child,e!==null))for(Jc(e,t,n),e=e.sibling;e!==null;)Jc(e,t,n),e=e.sibling}function Yc(e){var t=e.stateNode,n=e.memoizedProps;try{for(var r=e.type,i=t.attributes;i.length;)t.removeAttributeNode(i[0]);Fd(t,r,n),t[tt]=e,t[nt]=n}catch(t){Ku(e,e.return,t)}}var Xc=!1,Zc=!1,Qc=!1,$c=typeof WeakSet==`function`?WeakSet:Set,Y=null;function el(e,t){if(e=e.containerInfo,zd=op,e=xr(e),Sr(e)){if(`selectionStart`in e)var n={start:e.selectionStart,end:e.selectionEnd};else a:{n=(n=e.ownerDocument)&&n.defaultView||window;var r=n.getSelection&&n.getSelection();if(r&&r.rangeCount!==0){n=r.anchorNode;var a=r.anchorOffset,o=r.focusNode;r=r.focusOffset;try{n.nodeType,o.nodeType}catch{n=null;break a}var s=0,c=-1,l=-1,u=0,d=0,f=e,p=null;b:for(;;){for(var m;f!==n||a!==0&&f.nodeType!==3||(c=s+a),f!==o||r!==0&&f.nodeType!==3||(l=s+r),f.nodeType===3&&(s+=f.nodeValue.length),(m=f.firstChild)!==null;)p=f,f=m;for(;;){if(f===e)break b;if(p===n&&++u===a&&(c=s),p===o&&++d===r&&(l=s),(m=f.nextSibling)!==null)break;f=p,p=f.parentNode}f=m}n=c===-1||l===-1?null:{start:c,end:l}}else n=null}n||={start:0,end:0}}else n=null;for(Bd={focusedElem:e,selectionRange:n},op=!1,Y=t;Y!==null;)if(t=Y,e=t.child,t.subtreeFlags&1028&&e!==null)e.return=t,Y=e;else for(;Y!==null;){switch(t=Y,o=t.alternate,e=t.flags,t.tag){case 0:if(e&4&&(e=t.updateQueue,e=e===null?null:e.events,e!==null))for(n=0;n<e.length;n++)a=e[n],a.ref.impl=a.nextImpl;break;case 11:case 15:break;case 1:if(e&1024&&o!==null){e=void 0,n=t,a=o.memoizedProps,o=o.memoizedState,r=n.stateNode;try{var h=Hs(n.type,a);e=r.getSnapshotBeforeUpdate(h,o),r.__reactInternalSnapshotBeforeUpdate=e}catch(e){Ku(n,n.return,e)}}break;case 3:if(e&1024){if(e=t.stateNode.containerInfo,n=e.nodeType,n===9)tf(e);else if(n===1)switch(e.nodeName){case`HEAD`:case`HTML`:case`BODY`:tf(e);break;default:e.textContent=``}}break;case 5:case 26:case 27:case 6:case 4:case 17:break;default:if(e&1024)throw Error(i(163))}if(e=t.sibling,e!==null){e.return=t.return,Y=e;break}Y=t.return}}function tl(e,t,n){var r=n.flags;switch(n.tag){case 0:case 11:case 15:gl(e,n),r&4&&Lc(5,n);break;case 1:if(gl(e,n),r&4)if(e=n.stateNode,t===null)try{e.componentDidMount()}catch(e){Ku(n,n.return,e)}else{var i=Hs(n.type,t.memoizedProps);t=t.memoizedState;try{e.componentDidUpdate(i,t,e.__reactInternalSnapshotBeforeUpdate)}catch(e){Ku(n,n.return,e)}}r&64&&zc(n),r&512&&Vc(n,n.return);break;case 3:if(gl(e,n),r&64&&(e=n.updateQueue,e!==null)){if(t=null,n.child!==null)switch(n.child.tag){case 27:case 5:t=n.child.stateNode;break;case 1:t=n.child.stateNode}try{Ka(e,t)}catch(e){Ku(n,n.return,e)}}break;case 27:t===null&&r&4&&Yc(n);case 26:case 5:gl(e,n),t===null&&r&4&&Uc(n),r&512&&Vc(n,n.return);break;case 12:gl(e,n);break;case 31:gl(e,n),r&4&&sl(e,n);break;case 13:gl(e,n),r&4&&cl(e,n),r&64&&(e=n.memoizedState,e!==null&&(e=e.dehydrated,e!==null&&(n=Xu.bind(null,n),sf(e,n))));break;case 22:if(r=n.memoizedState!==null||Xc,!r){t=t!==null&&t.memoizedState!==null||Zc,i=Xc;var a=Zc;Xc=r,(Zc=t)&&!a?vl(e,n,(n.subtreeFlags&8772)!=0):gl(e,n),Xc=i,Zc=a}break;case 30:break;default:gl(e,n)}}function nl(e){var t=e.alternate;t!==null&&(e.alternate=null,nl(t)),e.child=null,e.deletions=null,e.sibling=null,e.tag===5&&(t=e.stateNode,t!==null&&lt(t)),e.stateNode=null,e.return=null,e.dependencies=null,e.memoizedProps=null,e.memoizedState=null,e.pendingProps=null,e.stateNode=null,e.updateQueue=null}var rl=null,il=!1;function al(e,t,n){for(n=n.child;n!==null;)ol(e,t,n),n=n.sibling}function ol(e,t,n){if(je&&typeof je.onCommitFiberUnmount==`function`)try{je.onCommitFiberUnmount(Ae,n)}catch{}switch(n.tag){case 26:Zc||Hc(n,t),al(e,t,n),n.memoizedState?n.memoizedState.count--:n.stateNode&&(n=n.stateNode,n.parentNode.removeChild(n));break;case 27:Zc||Hc(n,t);var r=rl,i=il;Qd(n.type)&&(rl=n.stateNode,il=!1),al(e,t,n),pf(n.stateNode),rl=r,il=i;break;case 5:Zc||Hc(n,t);case 6:if(r=rl,i=il,rl=null,al(e,t,n),rl=r,il=i,rl!==null)if(il)try{(rl.nodeType===9?rl.body:rl.nodeName===`HTML`?rl.ownerDocument.body:rl).removeChild(n.stateNode)}catch(e){Ku(n,t,e)}else try{rl.removeChild(n.stateNode)}catch(e){Ku(n,t,e)}break;case 18:rl!==null&&(il?(e=rl,$d(e.nodeType===9?e.body:e.nodeName===`HTML`?e.ownerDocument.body:e,n.stateNode),Mp(e)):$d(rl,n.stateNode));break;case 4:r=rl,i=il,rl=n.stateNode.containerInfo,il=!0,al(e,t,n),rl=r,il=i;break;case 0:case 11:case 14:case 15:Rc(2,n,t),Zc||Rc(4,n,t),al(e,t,n);break;case 1:Zc||(Hc(n,t),r=n.stateNode,typeof r.componentWillUnmount==`function`&&Bc(n,t,r)),al(e,t,n);break;case 21:al(e,t,n);break;case 22:Zc=(r=Zc)||n.memoizedState!==null,al(e,t,n),Zc=r;break;default:al(e,t,n)}}function sl(e,t){if(t.memoizedState===null&&(e=t.alternate,e!==null&&(e=e.memoizedState,e!==null))){e=e.dehydrated;try{Mp(e)}catch(e){Ku(t,t.return,e)}}}function cl(e,t){if(t.memoizedState===null&&(e=t.alternate,e!==null&&(e=e.memoizedState,e!==null&&(e=e.dehydrated,e!==null))))try{Mp(e)}catch(e){Ku(t,t.return,e)}}function ll(e){switch(e.tag){case 31:case 13:case 19:var t=e.stateNode;return t===null&&(t=e.stateNode=new $c),t;case 22:return e=e.stateNode,t=e._retryCache,t===null&&(t=e._retryCache=new $c),t;default:throw Error(i(435,e.tag))}}function ul(e,t){var n=ll(e);t.forEach(function(t){if(!n.has(t)){n.add(t);var r=Zu.bind(null,e,t);t.then(r,r)}})}function dl(e,t){var n=t.deletions;if(n!==null)for(var r=0;r<n.length;r++){var a=n[r],o=e,s=t,c=s;a:for(;c!==null;){switch(c.tag){case 27:if(Qd(c.type)){rl=c.stateNode,il=!1;break a}break;case 5:rl=c.stateNode,il=!1;break a;case 3:case 4:rl=c.stateNode.containerInfo,il=!0;break a}c=c.return}if(rl===null)throw Error(i(160));ol(o,s,a),rl=null,il=!1,o=a.alternate,o!==null&&(o.return=null),a.return=null}if(t.subtreeFlags&13886)for(t=t.child;t!==null;)pl(t,e),t=t.sibling}var fl=null;function pl(e,t){var n=e.alternate,r=e.flags;switch(e.tag){case 0:case 11:case 14:case 15:dl(t,e),ml(e),r&4&&(Rc(3,e,e.return),Lc(3,e),Rc(5,e,e.return));break;case 1:dl(t,e),ml(e),r&512&&(Zc||n===null||Hc(n,n.return)),r&64&&Xc&&(e=e.updateQueue,e!==null&&(r=e.callbacks,r!==null&&(n=e.shared.hiddenCallbacks,e.shared.hiddenCallbacks=n===null?r:n.concat(r))));break;case 26:var a=fl;if(dl(t,e),ml(e),r&512&&(Zc||n===null||Hc(n,n.return)),r&4){var o=n===null?null:n.memoizedState;if(r=e.memoizedState,n===null)if(r===null)if(e.stateNode===null){a:{r=e.type,n=e.memoizedProps,a=a.ownerDocument||a;b:switch(r){case`title`:o=a.getElementsByTagName(`title`)[0],(!o||o[ct]||o[tt]||o.namespaceURI===`http://www.w3.org/2000/svg`||o.hasAttribute(`itemprop`))&&(o=a.createElement(r),a.head.insertBefore(o,a.querySelector(`head > title`))),Fd(o,r,n),o[tt]=e,mt(o),r=o;break a;case`link`:var s=Bf(`link`,`href`,a).get(r+(n.href||``));if(s){for(var c=0;c<s.length;c++)if(o=s[c],o.getAttribute(`href`)===(n.href==null||n.href===``?null:n.href)&&o.getAttribute(`rel`)===(n.rel==null?null:n.rel)&&o.getAttribute(`title`)===(n.title==null?null:n.title)&&o.getAttribute(`crossorigin`)===(n.crossOrigin==null?null:n.crossOrigin)){s.splice(c,1);break b}}o=a.createElement(r),Fd(o,r,n),a.head.appendChild(o);break;case`meta`:if(s=Bf(`meta`,`content`,a).get(r+(n.content||``))){for(c=0;c<s.length;c++)if(o=s[c],o.getAttribute(`content`)===(n.content==null?null:``+n.content)&&o.getAttribute(`name`)===(n.name==null?null:n.name)&&o.getAttribute(`property`)===(n.property==null?null:n.property)&&o.getAttribute(`http-equiv`)===(n.httpEquiv==null?null:n.httpEquiv)&&o.getAttribute(`charset`)===(n.charSet==null?null:n.charSet)){s.splice(c,1);break b}}o=a.createElement(r),Fd(o,r,n),a.head.appendChild(o);break;default:throw Error(i(468,r))}o[tt]=e,mt(o),r=o}e.stateNode=r}else Vf(a,e.type,e.stateNode);else e.stateNode=Ff(a,r,e.memoizedProps);else o===r?r===null&&e.stateNode!==null&&Wc(e,e.memoizedProps,n.memoizedProps):(o===null?n.stateNode!==null&&(n=n.stateNode,n.parentNode.removeChild(n)):o.count--,r===null?Vf(a,e.type,e.stateNode):Ff(a,r,e.memoizedProps))}break;case 27:dl(t,e),ml(e),r&512&&(Zc||n===null||Hc(n,n.return)),n!==null&&r&4&&Wc(e,e.memoizedProps,n.memoizedProps);break;case 5:if(dl(t,e),ml(e),r&512&&(Zc||n===null||Hc(n,n.return)),e.flags&32){a=e.stateNode;try{Bt(a,``)}catch(t){Ku(e,e.return,t)}}r&4&&e.stateNode!=null&&(a=e.memoizedProps,Wc(e,a,n===null?a:n.memoizedProps)),r&1024&&(Qc=!0);break;case 6:if(dl(t,e),ml(e),r&4){if(e.stateNode===null)throw Error(i(162));r=e.memoizedProps,n=e.stateNode;try{n.nodeValue=r}catch(t){Ku(e,e.return,t)}}break;case 3:if(zf=null,a=fl,fl=gf(t.containerInfo),dl(t,e),fl=a,ml(e),r&4&&n!==null&&n.memoizedState.isDehydrated)try{Mp(t.containerInfo)}catch(t){Ku(e,e.return,t)}Qc&&(Qc=!1,hl(e));break;case 4:r=fl,fl=gf(e.stateNode.containerInfo),dl(t,e),ml(e),fl=r;break;case 12:dl(t,e),ml(e);break;case 31:dl(t,e),ml(e),r&4&&(r=e.updateQueue,r!==null&&(e.updateQueue=null,ul(e,r)));break;case 13:dl(t,e),ml(e),e.child.flags&8192&&e.memoizedState!==null!=(n!==null&&n.memoizedState!==null)&&(eu=xe()),r&4&&(r=e.updateQueue,r!==null&&(e.updateQueue=null,ul(e,r)));break;case 22:a=e.memoizedState!==null;var l=n!==null&&n.memoizedState!==null,u=Xc,d=Zc;if(Xc=u||a,Zc=d||l,dl(t,e),Zc=d,Xc=u,ml(e),r&8192)a:for(t=e.stateNode,t._visibility=a?t._visibility&-2:t._visibility|1,a&&(n===null||l||Xc||Zc||_l(e)),n=null,t=e;;){if(t.tag===5||t.tag===26){if(n===null){l=n=t;try{if(o=l.stateNode,a)s=o.style,typeof s.setProperty==`function`?s.setProperty(`display`,`none`,`important`):s.display=`none`;else{c=l.stateNode;var f=l.memoizedProps.style,p=f!=null&&f.hasOwnProperty(`display`)?f.display:null;c.style.display=p==null||typeof p==`boolean`?``:(``+p).trim()}}catch(e){Ku(l,l.return,e)}}}else if(t.tag===6){if(n===null){l=t;try{l.stateNode.nodeValue=a?``:l.memoizedProps}catch(e){Ku(l,l.return,e)}}}else if(t.tag===18){if(n===null){l=t;try{var m=l.stateNode;a?ef(m,!0):ef(l.stateNode,!1)}catch(e){Ku(l,l.return,e)}}}else if((t.tag!==22&&t.tag!==23||t.memoizedState===null||t===e)&&t.child!==null){t.child.return=t,t=t.child;continue}if(t===e)break a;for(;t.sibling===null;){if(t.return===null||t.return===e)break a;n===t&&(n=null),t=t.return}n===t&&(n=null),t.sibling.return=t.return,t=t.sibling}r&4&&(r=e.updateQueue,r!==null&&(n=r.retryQueue,n!==null&&(r.retryQueue=null,ul(e,n))));break;case 19:dl(t,e),ml(e),r&4&&(r=e.updateQueue,r!==null&&(e.updateQueue=null,ul(e,r)));break;case 30:break;case 21:break;default:dl(t,e),ml(e)}}function ml(e){var t=e.flags;if(t&2){try{for(var n,r=e.return;r!==null;){if(Gc(r)){n=r;break}r=r.return}if(n==null)throw Error(i(160));switch(n.tag){case 27:var a=n.stateNode;Jc(e,Kc(e),a);break;case 5:var o=n.stateNode;n.flags&32&&(Bt(o,``),n.flags&=-33),Jc(e,Kc(e),o);break;case 3:case 4:var s=n.stateNode.containerInfo;qc(e,Kc(e),s);break;default:throw Error(i(161))}}catch(t){Ku(e,e.return,t)}e.flags&=-3}t&4096&&(e.flags&=-4097)}function hl(e){if(e.subtreeFlags&1024)for(e=e.child;e!==null;){var t=e;hl(t),t.tag===5&&t.flags&1024&&t.stateNode.reset(),e=e.sibling}}function gl(e,t){if(t.subtreeFlags&8772)for(t=t.child;t!==null;)tl(e,t.alternate,t),t=t.sibling}function _l(e){for(e=e.child;e!==null;){var t=e;switch(t.tag){case 0:case 11:case 14:case 15:Rc(4,t,t.return),_l(t);break;case 1:Hc(t,t.return);var n=t.stateNode;typeof n.componentWillUnmount==`function`&&Bc(t,t.return,n),_l(t);break;case 27:pf(t.stateNode);case 26:case 5:Hc(t,t.return),_l(t);break;case 22:t.memoizedState===null&&_l(t);break;case 30:_l(t);break;default:_l(t)}e=e.sibling}}function vl(e,t,n){for(n&&=(t.subtreeFlags&8772)!=0,t=t.child;t!==null;){var r=t.alternate,i=e,a=t,o=a.flags;switch(a.tag){case 0:case 11:case 15:vl(i,a,n),Lc(4,a);break;case 1:if(vl(i,a,n),r=a,i=r.stateNode,typeof i.componentDidMount==`function`)try{i.componentDidMount()}catch(e){Ku(r,r.return,e)}if(r=a,i=r.updateQueue,i!==null){var s=r.stateNode;try{var c=i.shared.hiddenCallbacks;if(c!==null)for(i.shared.hiddenCallbacks=null,i=0;i<c.length;i++)Ga(c[i],s)}catch(e){Ku(r,r.return,e)}}n&&o&64&&zc(a),Vc(a,a.return);break;case 27:Yc(a);case 26:case 5:vl(i,a,n),n&&r===null&&o&4&&Uc(a),Vc(a,a.return);break;case 12:vl(i,a,n);break;case 31:vl(i,a,n),n&&o&4&&sl(i,a);break;case 13:vl(i,a,n),n&&o&4&&cl(i,a);break;case 22:a.memoizedState===null&&vl(i,a,n),Vc(a,a.return);break;case 30:break;default:vl(i,a,n)}t=t.sibling}}function yl(e,t){var n=null;e!==null&&e.memoizedState!==null&&e.memoizedState.cachePool!==null&&(n=e.memoizedState.cachePool.pool),e=null,t.memoizedState!==null&&t.memoizedState.cachePool!==null&&(e=t.memoizedState.cachePool.pool),e!==n&&(e!=null&&e.refCount++,n!=null&&ia(n))}function bl(e,t){e=null,t.alternate!==null&&(e=t.alternate.memoizedState.cache),t=t.memoizedState.cache,t!==e&&(t.refCount++,e!=null&&ia(e))}function xl(e,t,n,r){if(t.subtreeFlags&10256)for(t=t.child;t!==null;)Sl(e,t,n,r),t=t.sibling}function Sl(e,t,n,r){var i=t.flags;switch(t.tag){case 0:case 11:case 15:xl(e,t,n,r),i&2048&&Lc(9,t);break;case 1:xl(e,t,n,r);break;case 3:xl(e,t,n,r),i&2048&&(e=null,t.alternate!==null&&(e=t.alternate.memoizedState.cache),t=t.memoizedState.cache,t!==e&&(t.refCount++,e!=null&&ia(e)));break;case 12:if(i&2048){xl(e,t,n,r),e=t.stateNode;try{var a=t.memoizedProps,o=a.id,s=a.onPostCommit;typeof s==`function`&&s(o,t.alternate===null?`mount`:`update`,e.passiveEffectDuration,-0)}catch(e){Ku(t,t.return,e)}}else xl(e,t,n,r);break;case 31:xl(e,t,n,r);break;case 13:xl(e,t,n,r);break;case 23:break;case 22:a=t.stateNode,o=t.alternate,t.memoizedState===null?a._visibility&2?xl(e,t,n,r):(a._visibility|=2,Cl(e,t,n,r,(t.subtreeFlags&10256)!=0||!1)):a._visibility&2?xl(e,t,n,r):wl(e,t),i&2048&&yl(o,t);break;case 24:xl(e,t,n,r),i&2048&&bl(t.alternate,t);break;default:xl(e,t,n,r)}}function Cl(e,t,n,r,i){for(i&&=(t.subtreeFlags&10256)!=0||!1,t=t.child;t!==null;){var a=e,o=t,s=n,c=r,l=o.flags;switch(o.tag){case 0:case 11:case 15:Cl(a,o,s,c,i),Lc(8,o);break;case 23:break;case 22:var u=o.stateNode;o.memoizedState===null?(u._visibility|=2,Cl(a,o,s,c,i)):u._visibility&2?Cl(a,o,s,c,i):wl(a,o),i&&l&2048&&yl(o.alternate,o);break;case 24:Cl(a,o,s,c,i),i&&l&2048&&bl(o.alternate,o);break;default:Cl(a,o,s,c,i)}t=t.sibling}}function wl(e,t){if(t.subtreeFlags&10256)for(t=t.child;t!==null;){var n=e,r=t,i=r.flags;switch(r.tag){case 22:wl(n,r),i&2048&&yl(r.alternate,r);break;case 24:wl(n,r),i&2048&&bl(r.alternate,r);break;default:wl(n,r)}t=t.sibling}}var Tl=8192;function El(e,t,n){if(e.subtreeFlags&Tl)for(e=e.child;e!==null;)Dl(e,t,n),e=e.sibling}function Dl(e,t,n){switch(e.tag){case 26:El(e,t,n),e.flags&Tl&&e.memoizedState!==null&&Wf(n,fl,e.memoizedState,e.memoizedProps);break;case 5:El(e,t,n);break;case 3:case 4:var r=fl;fl=gf(e.stateNode.containerInfo),El(e,t,n),fl=r;break;case 22:e.memoizedState===null&&(r=e.alternate,r!==null&&r.memoizedState!==null?(r=Tl,Tl=16777216,El(e,t,n),Tl=r):El(e,t,n));break;default:El(e,t,n)}}function Ol(e){var t=e.alternate;if(t!==null&&(e=t.child,e!==null)){t.child=null;do t=e.sibling,e.sibling=null,e=t;while(e!==null)}}function kl(e){var t=e.deletions;if(e.flags&16){if(t!==null)for(var n=0;n<t.length;n++){var r=t[n];Y=r,Ml(r,e)}Ol(e)}if(e.subtreeFlags&10256)for(e=e.child;e!==null;)Al(e),e=e.sibling}function Al(e){switch(e.tag){case 0:case 11:case 15:kl(e),e.flags&2048&&Rc(9,e,e.return);break;case 3:kl(e);break;case 12:kl(e);break;case 22:var t=e.stateNode;e.memoizedState!==null&&t._visibility&2&&(e.return===null||e.return.tag!==13)?(t._visibility&=-3,jl(e)):kl(e);break;default:kl(e)}}function jl(e){var t=e.deletions;if(e.flags&16){if(t!==null)for(var n=0;n<t.length;n++){var r=t[n];Y=r,Ml(r,e)}Ol(e)}for(e=e.child;e!==null;){switch(t=e,t.tag){case 0:case 11:case 15:Rc(8,t,t.return),jl(t);break;case 22:n=t.stateNode,n._visibility&2&&(n._visibility&=-3,jl(t));break;default:jl(t)}e=e.sibling}}function Ml(e,t){for(;Y!==null;){var n=Y;switch(n.tag){case 0:case 11:case 15:Rc(8,n,t);break;case 23:case 22:if(n.memoizedState!==null&&n.memoizedState.cachePool!==null){var r=n.memoizedState.cachePool.pool;r!=null&&r.refCount++}break;case 24:ia(n.memoizedState.cache)}if(r=n.child,r!==null)r.return=n,Y=r;else a:for(n=e;Y!==null;){r=Y;var i=r.sibling,a=r.return;if(nl(r),r===n){Y=null;break a}if(i!==null){i.return=a,Y=i;break a}Y=a}}}var Nl={getCacheForType:function(e){var t=Xi(na),n=t.data.get(e);return n===void 0&&(n=e(),t.data.set(e,n)),n},cacheSignal:function(){return Xi(na).controller.signal}},Pl=typeof WeakMap==`function`?WeakMap:Map,Fl=0,Il=null,Ll=null,Rl=0,zl=0,Bl=null,Vl=!1,Hl=!1,Ul=!1,Wl=0,Gl=0,Kl=0,ql=0,Jl=0,Yl=0,Xl=0,Zl=null,Ql=null,$l=!1,eu=0,tu=0,nu=1/0,ru=null,iu=null,au=0,ou=null,su=null,cu=0,lu=0,uu=null,du=null,fu=0,pu=null;function mu(){return Fl&2&&Rl!==0?Rl&-Rl:I.T===null?$e():pd()}function hu(){if(Yl===0)if(!(Rl&536870912)||ki){var e=Re;Re<<=1,!(Re&3932160)&&(Re=262144),Yl=e}else Yl=536870912;return e=Qa.current,e!==null&&(e.flags|=32),Yl}function gu(e,t,n){(e===Il&&(zl===2||zl===9)||e.cancelPendingCommit!==null)&&(Cu(e,0),bu(e,Rl,Yl,!1)),Ke(e,n),(!(Fl&2)||e!==Il)&&(e===Il&&(!(Fl&2)&&(ql|=n),Gl===4&&bu(e,Rl,Yl,!1)),ad(e))}function _u(e,t,n){if(Fl&6)throw Error(i(327));var r=!n&&(t&127)==0&&(t&e.expiredLanes)===0||He(e,t),a=r?ju(e,t):ku(e,t,!0),o=r;do{if(a===0){Hl&&!r&&bu(e,t,0,!1);break}else{if(n=e.current.alternate,o&&!yu(n)){a=ku(e,t,!1),o=!1;continue}if(a===2){if(o=t,e.errorRecoveryDisabledLanes&o)var s=0;else s=e.pendingLanes&-536870913,s=s===0?s&536870912?536870912:0:s;if(s!==0){t=s;a:{var c=e;a=Zl;var l=c.current.memoizedState.isDehydrated;if(l&&(Cu(c,s).flags|=256),s=ku(c,s,!1),s!==2){if(Ul&&!l){c.errorRecoveryDisabledLanes|=o,ql|=o,a=4;break a}o=Ql,Ql=a,o!==null&&(Ql===null?Ql=o:Ql.push.apply(Ql,o))}a=s}if(o=!1,a!==2)continue}}if(a===1){Cu(e,0),bu(e,t,0,!0);break}a:{switch(r=e,o=a,o){case 0:case 1:throw Error(i(345));case 4:if((t&4194048)!==t)break;case 6:bu(r,t,Yl,!Vl);break a;case 2:Ql=null;break;case 3:case 5:break;default:throw Error(i(329))}if((t&62914560)===t&&(a=eu+300-xe(),10<a)){if(bu(r,t,Yl,!Vl),Ve(r,0,!0)!==0)break a;cu=t,r.timeoutHandle=qd(vu.bind(null,r,n,Ql,ru,$l,t,Yl,ql,Xl,Vl,o,`Throttled`,-0,0),a);break a}vu(r,n,Ql,ru,$l,t,Yl,ql,Xl,Vl,o,null,-0,0)}}break}while(1);ad(e)}function vu(e,t,n,r,i,a,o,s,c,l,u,d,f,p){if(e.timeoutHandle=-1,d=t.subtreeFlags,d&8192||(d&16785408)==16785408){d={stylesheets:null,count:0,imgCount:0,imgBytes:0,suspenseyImages:[],waitingForImages:!0,waitingForViewTransition:!1,unsuspend:Jt},Dl(t,a,d);var m=(a&62914560)===a?eu-xe():(a&4194048)===a?tu-xe():0;if(m=Kf(d,m),m!==null){cu=a,e.cancelPendingCommit=m(Ru.bind(null,e,t,a,n,r,i,o,s,c,u,d,null,f,p)),bu(e,a,o,!l);return}}Ru(e,t,a,n,r,i,o,s,c)}function yu(e){for(var t=e;;){var n=t.tag;if((n===0||n===11||n===15)&&t.flags&16384&&(n=t.updateQueue,n!==null&&(n=n.stores,n!==null)))for(var r=0;r<n.length;r++){var i=n[r],a=i.getSnapshot;i=i.value;try{if(!gr(a(),i))return!1}catch{return!1}}if(n=t.child,t.subtreeFlags&16384&&n!==null)n.return=t,t=n;else{if(t===e)break;for(;t.sibling===null;){if(t.return===null||t.return===e)return!0;t=t.return}t.sibling.return=t.return,t=t.sibling}}return!0}function bu(e,t,n,r){t&=~Jl,t&=~ql,e.suspendedLanes|=t,e.pingedLanes&=~t,r&&(e.warmLanes|=t),r=e.expirationTimes;for(var i=t;0<i;){var a=31-Ne(i),o=1<<a;r[a]=-1,i&=~o}n!==0&&Je(e,n,t)}function xu(){return Fl&6?!0:(od(0,!1),!1)}function Su(){if(Ll!==null){if(zl===0)var e=Ll.return;else e=Ll,Hi=Vi=null,q(e),Da=null,Oa=0,e=Ll;for(;e!==null;)Ic(e.alternate,e),e=e.return;Ll=null}}function Cu(e,t){var n=e.timeoutHandle;n!==-1&&(e.timeoutHandle=-1,Jd(n)),n=e.cancelPendingCommit,n!==null&&(e.cancelPendingCommit=null,n()),cu=0,Su(),Il=e,Ll=n=ii(e.current,null),Rl=t,zl=0,Bl=null,Vl=!1,Hl=He(e,t),Ul=!1,Xl=Yl=Jl=ql=Kl=Gl=0,Ql=Zl=null,$l=!1,t&8&&(t|=t&32);var r=e.entangledLanes;if(r!==0)for(e=e.entanglements,r&=t;0<r;){var i=31-Ne(r),a=1<<i;t|=e[i],r&=~a}return Wl=t,Jr(),n}function wu(e,t){so=null,I.H=Ps,t===_a||t===ya?(t=Ta(),zl=3):t===va?(t=Ta(),zl=4):zl=t===Zs?8:typeof t==`object`&&t&&typeof t.then==`function`?6:1,Bl=t,Ll===null&&(Gl=1,Gs(e,fi(t,e.current)))}function Tu(){var e=Qa.current;return e===null?!0:(Rl&4194048)===Rl?$a===null:(Rl&62914560)===Rl||Rl&536870912?e===$a:!1}function Eu(){var e=I.H;return I.H=Ps,e===null?Ps:e}function Du(){var e=I.A;return I.A=Nl,e}function Ou(){Gl=4,Vl||(Rl&4194048)!==Rl&&Qa.current!==null||(Hl=!0),!(Kl&134217727)&&!(ql&134217727)||Il===null||bu(Il,Rl,Yl,!1)}function ku(e,t,n){var r=Fl;Fl|=2;var i=Eu(),a=Du();(Il!==e||Rl!==t)&&(ru=null,Cu(e,t)),t=!1;var o=Gl;a:do try{if(zl!==0&&Ll!==null){var s=Ll,c=Bl;switch(zl){case 8:Su(),o=6;break a;case 3:case 2:case 9:case 6:Qa.current===null&&(t=!0);var l=zl;if(zl=0,Bl=null,Fu(e,s,c,l),n&&Hl){o=0;break a}break;default:l=zl,zl=0,Bl=null,Fu(e,s,c,l)}}Au(),o=Gl;break}catch(t){wu(e,t)}while(1);return t&&e.shellSuspendCounter++,Hi=Vi=null,Fl=r,I.H=i,I.A=a,Ll===null&&(Il=null,Rl=0,Jr()),o}function Au(){for(;Ll!==null;)Nu(Ll)}function ju(e,t){var n=Fl;Fl|=2;var r=Eu(),a=Du();Il!==e||Rl!==t?(ru=null,nu=xe()+500,Cu(e,t)):Hl=He(e,t);a:do try{if(zl!==0&&Ll!==null){t=Ll;var o=Bl;b:switch(zl){case 1:zl=0,Bl=null,Fu(e,t,o,1);break;case 2:case 9:if(xa(o)){zl=0,Bl=null,Pu(t);break}t=function(){zl!==2&&zl!==9||Il!==e||(zl=7),ad(e)},o.then(t,t);break a;case 3:zl=7;break a;case 4:zl=5;break a;case 7:xa(o)?(zl=0,Bl=null,Pu(t)):(zl=0,Bl=null,Fu(e,t,o,7));break;case 5:var s=null;switch(Ll.tag){case 26:s=Ll.memoizedState;case 5:case 27:var c=Ll;if(s?Uf(s):c.stateNode.complete){zl=0,Bl=null;var l=c.sibling;if(l!==null)Ll=l;else{var u=c.return;u===null?Ll=null:(Ll=u,Iu(u))}break b}}zl=0,Bl=null,Fu(e,t,o,5);break;case 6:zl=0,Bl=null,Fu(e,t,o,6);break;case 8:Su(),Gl=6;break a;default:throw Error(i(462))}}Mu();break}catch(t){wu(e,t)}while(1);return Hi=Vi=null,I.H=r,I.A=a,Fl=n,Ll===null?(Il=null,Rl=0,Jr(),Gl):0}function Mu(){for(;Ll!==null&&!ye();)Nu(Ll)}function Nu(e){var t=Dc(e.alternate,e,Wl);e.memoizedProps=e.pendingProps,t===null?Iu(e):Ll=t}function Pu(e){var t=e,n=t.alternate;switch(t.tag){case 15:case 0:t=dc(n,t,t.pendingProps,t.type,void 0,Rl);break;case 11:t=dc(n,t,t.pendingProps,t.type.render,t.ref,Rl);break;case 5:q(t);default:Ic(n,t),t=Ll=ai(t,Wl),t=Dc(n,t,Wl)}e.memoizedProps=e.pendingProps,t===null?Iu(e):Ll=t}function Fu(e,t,n,r){Hi=Vi=null,q(t),Da=null,Oa=0;var i=t.return;try{if(Xs(e,i,t,n,Rl)){Gl=1,Gs(e,fi(n,e.current)),Ll=null;return}}catch(t){if(i!==null)throw Ll=i,t;Gl=1,Gs(e,fi(n,e.current)),Ll=null;return}t.flags&32768?(ki||r===1?e=!0:Hl||Rl&536870912?e=!1:(Vl=e=!0,(r===2||r===9||r===3||r===6)&&(r=Qa.current,r!==null&&r.tag===13&&(r.flags|=16384))),Lu(t,e)):Iu(t)}function Iu(e){var t=e;do{if(t.flags&32768){Lu(t,Vl);return}e=t.return;var n=Pc(t.alternate,t,Wl);if(n!==null){Ll=n;return}if(t=t.sibling,t!==null){Ll=t;return}Ll=t=e}while(t!==null);Gl===0&&(Gl=5)}function Lu(e,t){do{var n=Fc(e.alternate,e);if(n!==null){n.flags&=32767,Ll=n;return}if(n=e.return,n!==null&&(n.flags|=32768,n.subtreeFlags=0,n.deletions=null),!t&&(e=e.sibling,e!==null)){Ll=e;return}Ll=e=n}while(e!==null);Gl=6,Ll=null}function Ru(e,t,n,r,a,o,s,c,l){e.cancelPendingCommit=null;do Uu();while(au!==0);if(Fl&6)throw Error(i(327));if(t!==null){if(t===e.current)throw Error(i(177));if(o=t.lanes|t.childLanes,o|=qr,qe(e,n,o,s,c,l),e===Il&&(Ll=Il=null,Rl=0),su=t,ou=e,cu=n,lu=o,uu=a,du=r,t.subtreeFlags&10256||t.flags&10256?(e.callbackNode=null,e.callbackPriority=0,Qu(Te,function(){return Wu(),null})):(e.callbackNode=null,e.callbackPriority=0),r=(t.flags&13878)!=0,t.subtreeFlags&13878||r){r=I.T,I.T=null,a=L.p,L.p=2,s=Fl,Fl|=4;try{el(e,t,n)}finally{Fl=s,L.p=a,I.T=r}}au=1,zu(),Bu(),Vu()}}function zu(){if(au===1){au=0;var e=ou,t=su,n=(t.flags&13878)!=0;if(t.subtreeFlags&13878||n){n=I.T,I.T=null;var r=L.p;L.p=2;var i=Fl;Fl|=4;try{pl(t,e);var a=Bd,o=xr(e.containerInfo),s=a.focusedElem,c=a.selectionRange;if(o!==s&&s&&s.ownerDocument&&br(s.ownerDocument.documentElement,s)){if(c!==null&&Sr(s)){var l=c.start,u=c.end;if(u===void 0&&(u=l),`selectionStart`in s)s.selectionStart=l,s.selectionEnd=Math.min(u,s.value.length);else{var d=s.ownerDocument||document,f=d&&d.defaultView||window;if(f.getSelection){var p=f.getSelection(),m=s.textContent.length,h=Math.min(c.start,m),g=c.end===void 0?h:Math.min(c.end,m);!p.extend&&h>g&&(o=g,g=h,h=o);var _=yr(s,h),v=yr(s,g);if(_&&v&&(p.rangeCount!==1||p.anchorNode!==_.node||p.anchorOffset!==_.offset||p.focusNode!==v.node||p.focusOffset!==v.offset)){var y=d.createRange();y.setStart(_.node,_.offset),p.removeAllRanges(),h>g?(p.addRange(y),p.extend(v.node,v.offset)):(y.setEnd(v.node,v.offset),p.addRange(y))}}}}for(d=[],p=s;p=p.parentNode;)p.nodeType===1&&d.push({element:p,left:p.scrollLeft,top:p.scrollTop});for(typeof s.focus==`function`&&s.focus(),s=0;s<d.length;s++){var b=d[s];b.element.scrollLeft=b.left,b.element.scrollTop=b.top}}op=!!zd,Bd=zd=null}finally{Fl=i,L.p=r,I.T=n}}e.current=t,au=2}}function Bu(){if(au===2){au=0;var e=ou,t=su,n=(t.flags&8772)!=0;if(t.subtreeFlags&8772||n){n=I.T,I.T=null;var r=L.p;L.p=2;var i=Fl;Fl|=4;try{tl(e,t.alternate,t)}finally{Fl=i,L.p=r,I.T=n}}au=3}}function Vu(){if(au===4||au===3){au=0,be();var e=ou,t=su,n=cu,r=du;t.subtreeFlags&10256||t.flags&10256?au=5:(au=0,su=ou=null,Hu(e,e.pendingLanes));var i=e.pendingLanes;if(i===0&&(iu=null),Qe(n),t=t.stateNode,je&&typeof je.onCommitFiberRoot==`function`)try{je.onCommitFiberRoot(Ae,t,void 0,(t.current.flags&128)==128)}catch{}if(r!==null){t=I.T,i=L.p,L.p=2,I.T=null;try{for(var a=e.onRecoverableError,o=0;o<r.length;o++){var s=r[o];a(s.value,{componentStack:s.stack})}}finally{I.T=t,L.p=i}}cu&3&&Uu(),ad(e),i=e.pendingLanes,n&261930&&i&42?e===pu?fu++:(fu=0,pu=e):fu=0,od(0,!1)}}function Hu(e,t){(e.pooledCacheLanes&=t)===0&&(t=e.pooledCache,t!=null&&(e.pooledCache=null,ia(t)))}function Uu(){return zu(),Bu(),Vu(),Wu()}function Wu(){if(au!==5)return!1;var e=ou,t=lu;lu=0;var n=Qe(cu),r=I.T,a=L.p;try{L.p=32>n?32:n,I.T=null,n=uu,uu=null;var o=ou,s=cu;if(au=0,su=ou=null,cu=0,Fl&6)throw Error(i(331));var c=Fl;if(Fl|=4,Al(o.current),Sl(o,o.current,s,n),Fl=c,od(0,!1),je&&typeof je.onPostCommitFiberRoot==`function`)try{je.onPostCommitFiberRoot(Ae,o)}catch{}return!0}finally{L.p=a,I.T=r,Hu(e,t)}}function Gu(e,t,n){t=fi(n,t),t=qs(e.stateNode,t,2),e=za(e,t,2),e!==null&&(Ke(e,2),ad(e))}function Ku(e,t,n){if(e.tag===3)Gu(e,e,n);else for(;t!==null;){if(t.tag===3){Gu(t,e,n);break}else if(t.tag===1){var r=t.stateNode;if(typeof t.type.getDerivedStateFromError==`function`||typeof r.componentDidCatch==`function`&&(iu===null||!iu.has(r))){e=fi(n,e),n=Js(2),r=za(t,n,2),r!==null&&(Ys(n,r,t,e),Ke(r,2),ad(r));break}}t=t.return}}function qu(e,t,n){var r=e.pingCache;if(r===null){r=e.pingCache=new Pl;var i=new Set;r.set(t,i)}else i=r.get(t),i===void 0&&(i=new Set,r.set(t,i));i.has(n)||(Ul=!0,i.add(n),e=Ju.bind(null,e,t,n),t.then(e,e))}function Ju(e,t,n){var r=e.pingCache;r!==null&&r.delete(t),e.pingedLanes|=e.suspendedLanes&n,e.warmLanes&=~n,Il===e&&(Rl&n)===n&&(Gl===4||Gl===3&&(Rl&62914560)===Rl&&300>xe()-eu?!(Fl&2)&&Cu(e,0):Jl|=n,Xl===Rl&&(Xl=0)),ad(e)}function Yu(e,t){t===0&&(t=We()),e=Zr(e,t),e!==null&&(Ke(e,t),ad(e))}function Xu(e){var t=e.memoizedState,n=0;t!==null&&(n=t.retryLane),Yu(e,n)}function Zu(e,t){var n=0;switch(e.tag){case 31:case 13:var r=e.stateNode,a=e.memoizedState;a!==null&&(n=a.retryLane);break;case 19:r=e.stateNode;break;case 22:r=e.stateNode._retryCache;break;default:throw Error(i(314))}r!==null&&r.delete(t),Yu(e,n)}function Qu(e,t){return _e(e,t)}var $u=null,ed=null,td=!1,nd=!1,rd=!1,id=0;function ad(e){e!==ed&&e.next===null&&(ed===null?$u=ed=e:ed=ed.next=e),nd=!0,td||(td=!0,fd())}function od(e,t){if(!rd&&nd){rd=!0;do for(var n=!1,r=$u;r!==null;){if(!t)if(e!==0){var i=r.pendingLanes;if(i===0)var a=0;else{var o=r.suspendedLanes,s=r.pingedLanes;a=(1<<31-Ne(42|e)+1)-1,a&=i&~(o&~s),a=a&201326741?a&201326741|1:a?a|2:0}a!==0&&(n=!0,dd(r,a))}else a=Rl,a=Ve(r,r===Il?a:0,r.cancelPendingCommit!==null||r.timeoutHandle!==-1),!(a&3)||He(r,a)||(n=!0,dd(r,a));r=r.next}while(n);rd=!1}}function sd(){cd()}function cd(){nd=td=!1;var e=0;id!==0&&Kd()&&(e=id);for(var t=xe(),n=null,r=$u;r!==null;){var i=r.next,a=ld(r,t);a===0?(r.next=null,n===null?$u=i:n.next=i,i===null&&(ed=n)):(n=r,(e!==0||a&3)&&(nd=!0)),r=i}au!==0&&au!==5||od(e,!1),id!==0&&(id=0)}function ld(e,t){for(var n=e.suspendedLanes,r=e.pingedLanes,i=e.expirationTimes,a=e.pendingLanes&-62914561;0<a;){var o=31-Ne(a),s=1<<o,c=i[o];c===-1?((s&n)===0||(s&r)!==0)&&(i[o]=Ue(s,t)):c<=t&&(e.expiredLanes|=s),a&=~s}if(t=Il,n=Rl,n=Ve(e,e===t?n:0,e.cancelPendingCommit!==null||e.timeoutHandle!==-1),r=e.callbackNode,n===0||e===t&&(zl===2||zl===9)||e.cancelPendingCommit!==null)return r!==null&&r!==null&&ve(r),e.callbackNode=null,e.callbackPriority=0;if(!(n&3)||He(e,n)){if(t=n&-n,t===e.callbackPriority)return t;switch(r!==null&&ve(r),Qe(n)){case 2:case 8:n=we;break;case 32:n=Te;break;case 268435456:n=De;break;default:n=Te}return r=ud.bind(null,e),n=_e(n,r),e.callbackPriority=t,e.callbackNode=n,t}return r!==null&&r!==null&&ve(r),e.callbackPriority=2,e.callbackNode=null,2}function ud(e,t){if(au!==0&&au!==5)return e.callbackNode=null,e.callbackPriority=0,null;var n=e.callbackNode;if(Uu()&&e.callbackNode!==n)return null;var r=Rl;return r=Ve(e,e===Il?r:0,e.cancelPendingCommit!==null||e.timeoutHandle!==-1),r===0?null:(_u(e,r,t),ld(e,xe()),e.callbackNode!=null&&e.callbackNode===n?ud.bind(null,e):null)}function dd(e,t){if(Uu())return null;_u(e,t,!0)}function fd(){Xd(function(){Fl&6?_e(Ce,sd):cd()})}function pd(){if(id===0){var e=sa;e===0&&(e=Le,Le<<=1,!(Le&261888)&&(Le=256)),id=e}return id}function md(e){return e==null||typeof e==`symbol`||typeof e==`boolean`?null:typeof e==`function`?e:qt(``+e)}function hd(e,t){var n=t.ownerDocument.createElement(`input`);return n.name=t.name,n.value=t.value,e.id&&n.setAttribute(`form`,e.id),t.parentNode.insertBefore(n,t),e=new FormData(e),n.parentNode.removeChild(n),e}function gd(e,t,n,r,i){if(t===`submit`&&n&&n.stateNode===i){var a=md((i[nt]||null).action),o=r.submitter;o&&(t=(t=o[nt]||null)?md(t.formAction):o.getAttribute(`formAction`),t!==null&&(a=t,o=null));var s=new hn(`action`,`action`,null,r,i);e.push({event:s,listeners:[{instance:null,listener:function(){if(r.defaultPrevented){if(id!==0){var e=o?hd(i,o):new FormData(i);bs(n,{pending:!0,data:e,method:i.method,action:a},null,e)}}else typeof a==`function`&&(s.preventDefault(),e=o?hd(i,o):new FormData(i),bs(n,{pending:!0,data:e,method:i.method,action:a},a,e))},currentTarget:i}]})}}for(var _d=0;_d<Hr.length;_d++){var vd=Hr[_d];Ur(vd.toLowerCase(),`on`+(vd[0].toUpperCase()+vd.slice(1)))}Ur(Pr,`onAnimationEnd`),Ur(Fr,`onAnimationIteration`),Ur(Ir,`onAnimationStart`),Ur(`dblclick`,`onDoubleClick`),Ur(`focusin`,`onFocus`),Ur(`focusout`,`onBlur`),Ur(Lr,`onTransitionRun`),Ur(Rr,`onTransitionStart`),Ur(zr,`onTransitionCancel`),Ur(Br,`onTransitionEnd`),vt(`onMouseEnter`,[`mouseout`,`mouseover`]),vt(`onMouseLeave`,[`mouseout`,`mouseover`]),vt(`onPointerEnter`,[`pointerout`,`pointerover`]),vt(`onPointerLeave`,[`pointerout`,`pointerover`]),_t(`onChange`,`change click focusin focusout input keydown keyup selectionchange`.split(` `)),_t(`onSelect`,`focusout contextmenu dragend focusin keydown keyup mousedown mouseup selectionchange`.split(` `)),_t(`onBeforeInput`,[`compositionend`,`keypress`,`textInput`,`paste`]),_t(`onCompositionEnd`,`compositionend focusout keydown keypress keyup mousedown`.split(` `)),_t(`onCompositionStart`,`compositionstart focusout keydown keypress keyup mousedown`.split(` `)),_t(`onCompositionUpdate`,`compositionupdate focusout keydown keypress keyup mousedown`.split(` `));var yd=`abort canplay canplaythrough durationchange emptied encrypted ended error loadeddata loadedmetadata loadstart pause play playing progress ratechange resize seeked seeking stalled suspend timeupdate volumechange waiting`.split(` `),X=new Set(`beforetoggle cancel close invalid load scroll scrollend toggle`.split(` `).concat(yd));function bd(e,t){t=(t&4)!=0;for(var n=0;n<e.length;n++){var r=e[n],i=r.event;r=r.listeners;a:{var a=void 0;if(t)for(var o=r.length-1;0<=o;o--){var s=r[o],c=s.instance,l=s.currentTarget;if(s=s.listener,c!==a&&i.isPropagationStopped())break a;a=s,i.currentTarget=l;try{a(i)}catch(e){Wr(e)}i.currentTarget=null,a=c}else for(o=0;o<r.length;o++){if(s=r[o],c=s.instance,l=s.currentTarget,s=s.listener,c!==a&&i.isPropagationStopped())break a;a=s,i.currentTarget=l;try{a(i)}catch(e){Wr(e)}i.currentTarget=null,a=c}}}}function Z(e,t){var n=t[it];n===void 0&&(n=t[it]=new Set);var r=e+`__bubble`;n.has(r)||(wd(t,e,2,!1),n.add(r))}function xd(e,t,n){var r=0;t&&(r|=4),wd(n,e,r,t)}var Sd=`_reactListening`+Math.random().toString(36).slice(2);function Cd(e){if(!e[Sd]){e[Sd]=!0,ht.forEach(function(t){t!==`selectionchange`&&(X.has(t)||xd(t,!1,e),xd(t,!0,e))});var t=e.nodeType===9?e:e.ownerDocument;t===null||t[Sd]||(t[Sd]=!0,xd(`selectionchange`,!1,t))}}function wd(e,t,n,r){switch(pp(t)){case 2:var i=sp;break;case 8:i=cp;break;default:i=lp}n=i.bind(null,t,n,e),i=void 0,!rn||t!==`touchstart`&&t!==`touchmove`&&t!==`wheel`||(i=!0),r?i===void 0?e.addEventListener(t,n,!0):e.addEventListener(t,n,{capture:!0,passive:i}):i===void 0?e.addEventListener(t,n,!1):e.addEventListener(t,n,{passive:i})}function Td(e,t,n,r,i){var a=r;if(!(t&1)&&!(t&2)&&r!==null)a:for(;;){if(r===null)return;var s=r.tag;if(s===3||s===4){var c=r.stateNode.containerInfo;if(c===i)break;if(s===4)for(s=r.return;s!==null;){var l=s.tag;if((l===3||l===4)&&s.stateNode.containerInfo===i)return;s=s.return}for(;c!==null;){if(s=ut(c),s===null)return;if(l=s.tag,l===5||l===6||l===26||l===27){r=a=s;continue a}c=c.parentNode}}r=r.return}tn(function(){var r=a,i=Xt(n),s=[];a:{var c=Vr.get(e);if(c!==void 0){var l=hn,u=e;switch(e){case`keypress`:if(un(n)===0)break a;case`keydown`:case`keyup`:l=Nn;break;case`focusin`:u=`focus`,l=wn;break;case`focusout`:u=`blur`,l=wn;break;case`beforeblur`:case`afterblur`:l=wn;break;case`click`:if(n.button===2)break a;case`auxclick`:case`dblclick`:case`mousedown`:case`mousemove`:case`mouseup`:case`mouseout`:case`mouseover`:case`contextmenu`:l=Sn;break;case`drag`:case`dragend`:case`dragenter`:case`dragexit`:case`dragleave`:case`dragover`:case`dragstart`:case`drop`:l=Cn;break;case`touchcancel`:case`touchend`:case`touchmove`:case`touchstart`:l=Fn;break;case Pr:case Fr:case Ir:l=Tn;break;case Br:l=In;break;case`scroll`:case`scrollend`:l=_n;break;case`wheel`:l=Ln;break;case`copy`:case`cut`:case`paste`:l=En;break;case`gotpointercapture`:case`lostpointercapture`:case`pointercancel`:case`pointerdown`:case`pointermove`:case`pointerout`:case`pointerover`:case`pointerup`:l=Pn;break;case`toggle`:case`beforetoggle`:l=Rn}var d=(t&4)!=0,f=!d&&(e===`scroll`||e===`scrollend`),p=d?c===null?null:c+`Capture`:c;d=[];for(var m=r,h;m!==null;){var g=m;if(h=g.stateNode,g=g.tag,g!==5&&g!==26&&g!==27||h===null||p===null||(g=W(m,p),g!=null&&d.push(Ed(m,g,h))),f)break;m=m.return}0<d.length&&(c=new l(c,u,null,n,i),s.push({event:c,listeners:d}))}}if(!(t&7)){a:{if(c=e===`mouseover`||e===`pointerover`,l=e===`mouseout`||e===`pointerout`,c&&n!==Yt&&(u=n.relatedTarget||n.fromElement)&&(ut(u)||u[rt]))break a;if((l||c)&&(c=i.window===i?i:(c=i.ownerDocument)?c.defaultView||c.parentWindow:window,l?(u=n.relatedTarget||n.toElement,l=r,u=u?ut(u):null,u!==null&&(f=o(u),d=u.tag,u!==f||d!==5&&d!==27&&d!==6)&&(u=null)):(l=null,u=r),l!==u)){if(d=Sn,g=`onMouseLeave`,p=`onMouseEnter`,m=`mouse`,(e===`pointerout`||e===`pointerover`)&&(d=Pn,g=`onPointerLeave`,p=`onPointerEnter`,m=`pointer`),f=l==null?c:ft(l),h=u==null?c:ft(u),c=new d(g,m+`leave`,l,n,i),c.target=f,c.relatedTarget=h,g=null,ut(i)===r&&(d=new d(p,m+`enter`,u,n,i),d.target=h,d.relatedTarget=f,g=d),f=g,l&&u)b:{for(d=Od,p=l,m=u,h=0,g=p;g;g=d(g))h++;g=0;for(var _=m;_;_=d(_))g++;for(;0<h-g;)p=d(p),h--;for(;0<g-h;)m=d(m),g--;for(;h--;){if(p===m||m!==null&&p===m.alternate){d=p;break b}p=d(p),m=d(m)}d=null}else d=null;l!==null&&kd(s,c,l,d,!1),u!==null&&f!==null&&kd(s,f,u,d,!0)}}a:{if(c=r?ft(r):window,l=c.nodeName&&c.nodeName.toLowerCase(),l===`select`||l===`input`&&c.type===`file`)var v=ir;else if(Qn(c))if(ar)v=mr;else{v=fr;var y=dr}else l=c.nodeName,!l||l.toLowerCase()!==`input`||c.type!==`checkbox`&&c.type!==`radio`?r&&Wt(r.elementType)&&(v=ir):v=pr;if(v&&=v(e,r)){$n(s,v,n,i);break a}y&&y(e,c,r),e===`focusout`&&r&&c.type===`number`&&r.memoizedProps.value!=null&&It(c,`number`,c.value)}switch(y=r?ft(r):window,e){case`focusin`:(Qn(y)||y.contentEditable===`true`)&&(wr=y,Tr=r,Er=null);break;case`focusout`:Er=Tr=wr=null;break;case`mousedown`:Dr=!0;break;case`contextmenu`:case`mouseup`:case`dragend`:Dr=!1,Or(s,n,i);break;case`selectionchange`:if(Cr)break;case`keydown`:case`keyup`:Or(s,n,i)}var b;if(Bn)b:{switch(e){case`compositionstart`:var x=`onCompositionStart`;break b;case`compositionend`:x=`onCompositionEnd`;break b;case`compositionupdate`:x=`onCompositionUpdate`;break b}x=void 0}else Jn?Kn(e,n)&&(x=`onCompositionEnd`):e===`keydown`&&n.keyCode===229&&(x=`onCompositionStart`);x&&(Un&&n.locale!==`ko`&&(Jn||x!==`onCompositionStart`?x===`onCompositionEnd`&&Jn&&(b=ln()):(on=i,sn=`value`in on?on.value:on.textContent,Jn=!0)),y=Dd(r,x),0<y.length&&(x=new Dn(x,e,null,n,i),s.push({event:x,listeners:y}),b?x.data=b:(b=qn(n),b!==null&&(x.data=b)))),(b=Hn?Yn(e,n):Xn(e,n))&&(x=Dd(r,`onBeforeInput`),0<x.length&&(y=new Dn(`onBeforeInput`,`beforeinput`,null,n,i),s.push({event:y,listeners:x}),y.data=b)),gd(s,e,r,n,i)}bd(s,t)})}function Ed(e,t,n){return{instance:e,listener:t,currentTarget:n}}function Dd(e,t){for(var n=t+`Capture`,r=[];e!==null;){var i=e,a=i.stateNode;if(i=i.tag,i!==5&&i!==26&&i!==27||a===null||(i=W(e,n),i!=null&&r.unshift(Ed(e,i,a)),i=W(e,t),i!=null&&r.push(Ed(e,i,a))),e.tag===3)return r;e=e.return}return[]}function Od(e){if(e===null)return null;do e=e.return;while(e&&e.tag!==5&&e.tag!==27);return e||null}function kd(e,t,n,r,i){for(var a=t._reactName,o=[];n!==null&&n!==r;){var s=n,c=s.alternate,l=s.stateNode;if(s=s.tag,c!==null&&c===r)break;s!==5&&s!==26&&s!==27||l===null||(c=l,i?(l=W(n,a),l!=null&&o.unshift(Ed(n,l,c))):i||(l=W(n,a),l!=null&&o.push(Ed(n,l,c)))),n=n.return}o.length!==0&&e.push({event:t,listeners:o})}var Ad=/\r\n?/g,tee=/\u0000|\uFFFD/g;function jd(e){return(typeof e==`string`?e:``+e).replace(Ad,`
-`).replace(tee,``)}function Md(e,t){return t=jd(t),jd(e)===t}function Nd(e,t,n,r,a,o){switch(n){case`children`:typeof r==`string`?t===`body`||t===`textarea`&&r===``||Bt(e,r):(typeof r==`number`||typeof r==`bigint`)&&t!==`body`&&Bt(e,``+r);break;case`className`:wt(e,`class`,r);break;case`tabIndex`:wt(e,`tabindex`,r);break;case`dir`:case`role`:case`viewBox`:case`width`:case`height`:wt(e,n,r);break;case`style`:Ut(e,r,o);break;case`data`:if(t!==`object`){wt(e,`data`,r);break}case`src`:case`href`:if(r===``&&(t!==`a`||n!==`href`)){e.removeAttribute(n);break}if(r==null||typeof r==`function`||typeof r==`symbol`||typeof r==`boolean`){e.removeAttribute(n);break}r=qt(``+r),e.setAttribute(n,r);break;case`action`:case`formAction`:if(typeof r==`function`){e.setAttribute(n,`javascript:throw new Error('A React form was unexpectedly submitted. If you called form.submit() manually, consider using form.requestSubmit() instead. If you\\'re trying to use event.stopPropagation() in a submit event handler, consider also calling event.preventDefault().')`);break}else typeof o==`function`&&(n===`formAction`?(t!==`input`&&Nd(e,t,`name`,a.name,a,null),Nd(e,t,`formEncType`,a.formEncType,a,null),Nd(e,t,`formMethod`,a.formMethod,a,null),Nd(e,t,`formTarget`,a.formTarget,a,null)):(Nd(e,t,`encType`,a.encType,a,null),Nd(e,t,`method`,a.method,a,null),Nd(e,t,`target`,a.target,a,null)));if(r==null||typeof r==`symbol`||typeof r==`boolean`){e.removeAttribute(n);break}r=qt(``+r),e.setAttribute(n,r);break;case`onClick`:r!=null&&(e.onclick=Jt);break;case`onScroll`:r!=null&&Z(`scroll`,e);break;case`onScrollEnd`:r!=null&&Z(`scrollend`,e);break;case`dangerouslySetInnerHTML`:if(r!=null){if(typeof r!=`object`||!(`__html`in r))throw Error(i(61));if(n=r.__html,n!=null){if(a.children!=null)throw Error(i(60));e.innerHTML=n}}break;case`multiple`:e.multiple=r&&typeof r!=`function`&&typeof r!=`symbol`;break;case`muted`:e.muted=r&&typeof r!=`function`&&typeof r!=`symbol`;break;case`suppressContentEditableWarning`:case`suppressHydrationWarning`:case`defaultValue`:case`defaultChecked`:case`innerHTML`:case`ref`:break;case`autoFocus`:break;case`xlinkHref`:if(r==null||typeof r==`function`||typeof r==`boolean`||typeof r==`symbol`){e.removeAttribute(`xlink:href`);break}n=qt(``+r),e.setAttributeNS(`http://www.w3.org/1999/xlink`,`xlink:href`,n);break;case`contentEditable`:case`spellCheck`:case`draggable`:case`value`:case`autoReverse`:case`externalResourcesRequired`:case`focusable`:case`preserveAlpha`:r!=null&&typeof r!=`function`&&typeof r!=`symbol`?e.setAttribute(n,``+r):e.removeAttribute(n);break;case`inert`:case`allowFullScreen`:case`async`:case`autoPlay`:case`controls`:case`default`:case`defer`:case`disabled`:case`disablePictureInPicture`:case`disableRemotePlayback`:case`formNoValidate`:case`hidden`:case`loop`:case`noModule`:case`noValidate`:case`open`:case`playsInline`:case`readOnly`:case`required`:case`reversed`:case`scoped`:case`seamless`:case`itemScope`:r&&typeof r!=`function`&&typeof r!=`symbol`?e.setAttribute(n,``):e.removeAttribute(n);break;case`capture`:case`download`:!0===r?e.setAttribute(n,``):!1!==r&&r!=null&&typeof r!=`function`&&typeof r!=`symbol`?e.setAttribute(n,r):e.removeAttribute(n);break;case`cols`:case`rows`:case`size`:case`span`:r!=null&&typeof r!=`function`&&typeof r!=`symbol`&&!isNaN(r)&&1<=r?e.setAttribute(n,r):e.removeAttribute(n);break;case`rowSpan`:case`start`:r==null||typeof r==`function`||typeof r==`symbol`||isNaN(r)?e.removeAttribute(n):e.setAttribute(n,r);break;case`popover`:Z(`beforetoggle`,e),Z(`toggle`,e),Ct(e,`popover`,r);break;case`xlinkActuate`:Tt(e,`http://www.w3.org/1999/xlink`,`xlink:actuate`,r);break;case`xlinkArcrole`:Tt(e,`http://www.w3.org/1999/xlink`,`xlink:arcrole`,r);break;case`xlinkRole`:Tt(e,`http://www.w3.org/1999/xlink`,`xlink:role`,r);break;case`xlinkShow`:Tt(e,`http://www.w3.org/1999/xlink`,`xlink:show`,r);break;case`xlinkTitle`:Tt(e,`http://www.w3.org/1999/xlink`,`xlink:title`,r);break;case`xlinkType`:Tt(e,`http://www.w3.org/1999/xlink`,`xlink:type`,r);break;case`xmlBase`:Tt(e,`http://www.w3.org/XML/1998/namespace`,`xml:base`,r);break;case`xmlLang`:Tt(e,`http://www.w3.org/XML/1998/namespace`,`xml:lang`,r);break;case`xmlSpace`:Tt(e,`http://www.w3.org/XML/1998/namespace`,`xml:space`,r);break;case`is`:Ct(e,`is`,r);break;case`innerText`:case`textContent`:break;default:(!(2<n.length)||n[0]!==`o`&&n[0]!==`O`||n[1]!==`n`&&n[1]!==`N`)&&(n=Gt.get(n)||n,Ct(e,n,r))}}function Pd(e,t,n,r,a,o){switch(n){case`style`:Ut(e,r,o);break;case`dangerouslySetInnerHTML`:if(r!=null){if(typeof r!=`object`||!(`__html`in r))throw Error(i(61));if(n=r.__html,n!=null){if(a.children!=null)throw Error(i(60));e.innerHTML=n}}break;case`children`:typeof r==`string`?Bt(e,r):(typeof r==`number`||typeof r==`bigint`)&&Bt(e,``+r);break;case`onScroll`:r!=null&&Z(`scroll`,e);break;case`onScrollEnd`:r!=null&&Z(`scrollend`,e);break;case`onClick`:r!=null&&(e.onclick=Jt);break;case`suppressContentEditableWarning`:case`suppressHydrationWarning`:case`innerHTML`:case`ref`:break;case`innerText`:case`textContent`:break;default:if(!gt.hasOwnProperty(n))a:{if(n[0]===`o`&&n[1]===`n`&&(a=n.endsWith(`Capture`),t=n.slice(2,a?n.length-7:void 0),o=e[nt]||null,o=o==null?null:o[n],typeof o==`function`&&e.removeEventListener(t,o,a),typeof r==`function`)){typeof o!=`function`&&o!==null&&(n in e?e[n]=null:e.hasAttribute(n)&&e.removeAttribute(n)),e.addEventListener(t,r,a);break a}n in e?e[n]=r:!0===r?e.setAttribute(n,``):Ct(e,n,r)}}}function Fd(e,t,n){switch(t){case`div`:case`span`:case`svg`:case`path`:case`a`:case`g`:case`p`:case`li`:break;case`img`:Z(`error`,e),Z(`load`,e);var r=!1,a=!1,o;for(o in n)if(n.hasOwnProperty(o)){var s=n[o];if(s!=null)switch(o){case`src`:r=!0;break;case`srcSet`:a=!0;break;case`children`:case`dangerouslySetInnerHTML`:throw Error(i(137,t));default:Nd(e,t,o,s,n,null)}}a&&Nd(e,t,`srcSet`,n.srcSet,n,null),r&&Nd(e,t,`src`,n.src,n,null);return;case`input`:Z(`invalid`,e);var c=o=s=a=null,l=null,u=null;for(r in n)if(n.hasOwnProperty(r)){var d=n[r];if(d!=null)switch(r){case`name`:a=d;break;case`type`:s=d;break;case`checked`:l=d;break;case`defaultChecked`:u=d;break;case`value`:o=d;break;case`defaultValue`:c=d;break;case`children`:case`dangerouslySetInnerHTML`:if(d!=null)throw Error(i(137,t));break;default:Nd(e,t,r,d,n,null)}}Ft(e,o,c,l,u,s,a,!1);return;case`select`:for(a in Z(`invalid`,e),r=s=o=null,n)if(n.hasOwnProperty(a)&&(c=n[a],c!=null))switch(a){case`value`:o=c;break;case`defaultValue`:s=c;break;case`multiple`:r=c;default:Nd(e,t,a,c,n,null)}t=o,n=s,e.multiple=!!r,t==null?n!=null&&Lt(e,!!r,n,!0):Lt(e,!!r,t,!1);return;case`textarea`:for(s in Z(`invalid`,e),o=a=r=null,n)if(n.hasOwnProperty(s)&&(c=n[s],c!=null))switch(s){case`value`:r=c;break;case`defaultValue`:a=c;break;case`children`:o=c;break;case`dangerouslySetInnerHTML`:if(c!=null)throw Error(i(91));break;default:Nd(e,t,s,c,n,null)}zt(e,r,a,o);return;case`option`:for(l in n)if(n.hasOwnProperty(l)&&(r=n[l],r!=null))switch(l){case`selected`:e.selected=r&&typeof r!=`function`&&typeof r!=`symbol`;break;default:Nd(e,t,l,r,n,null)}return;case`dialog`:Z(`beforetoggle`,e),Z(`toggle`,e),Z(`cancel`,e),Z(`close`,e);break;case`iframe`:case`object`:Z(`load`,e);break;case`video`:case`audio`:for(r=0;r<yd.length;r++)Z(yd[r],e);break;case`image`:Z(`error`,e),Z(`load`,e);break;case`details`:Z(`toggle`,e);break;case`embed`:case`source`:case`link`:Z(`error`,e),Z(`load`,e);case`area`:case`base`:case`br`:case`col`:case`hr`:case`keygen`:case`meta`:case`param`:case`track`:case`wbr`:case`menuitem`:for(u in n)if(n.hasOwnProperty(u)&&(r=n[u],r!=null))switch(u){case`children`:case`dangerouslySetInnerHTML`:throw Error(i(137,t));default:Nd(e,t,u,r,n,null)}return;default:if(Wt(t)){for(d in n)n.hasOwnProperty(d)&&(r=n[d],r!==void 0&&Pd(e,t,d,r,n,void 0));return}}for(c in n)n.hasOwnProperty(c)&&(r=n[c],r!=null&&Nd(e,t,c,r,n,null))}function Id(e,t,n,r){switch(t){case`div`:case`span`:case`svg`:case`path`:case`a`:case`g`:case`p`:case`li`:break;case`input`:var a=null,o=null,s=null,c=null,l=null,u=null,d=null;for(m in n){var f=n[m];if(n.hasOwnProperty(m)&&f!=null)switch(m){case`checked`:break;case`value`:break;case`defaultValue`:l=f;default:r.hasOwnProperty(m)||Nd(e,t,m,null,r,f)}}for(var p in r){var m=r[p];if(f=n[p],r.hasOwnProperty(p)&&(m!=null||f!=null))switch(p){case`type`:o=m;break;case`name`:a=m;break;case`checked`:u=m;break;case`defaultChecked`:d=m;break;case`value`:s=m;break;case`defaultValue`:c=m;break;case`children`:case`dangerouslySetInnerHTML`:if(m!=null)throw Error(i(137,t));break;default:m!==f&&Nd(e,t,p,m,r,f)}}Pt(e,s,c,l,u,d,o,a);return;case`select`:for(o in m=s=c=p=null,n)if(l=n[o],n.hasOwnProperty(o)&&l!=null)switch(o){case`value`:break;case`multiple`:m=l;default:r.hasOwnProperty(o)||Nd(e,t,o,null,r,l)}for(a in r)if(o=r[a],l=n[a],r.hasOwnProperty(a)&&(o!=null||l!=null))switch(a){case`value`:p=o;break;case`defaultValue`:c=o;break;case`multiple`:s=o;default:o!==l&&Nd(e,t,a,o,r,l)}t=c,n=s,r=m,p==null?!!r!=!!n&&(t==null?Lt(e,!!n,n?[]:``,!1):Lt(e,!!n,t,!0)):Lt(e,!!n,p,!1);return;case`textarea`:for(c in m=p=null,n)if(a=n[c],n.hasOwnProperty(c)&&a!=null&&!r.hasOwnProperty(c))switch(c){case`value`:break;case`children`:break;default:Nd(e,t,c,null,r,a)}for(s in r)if(a=r[s],o=n[s],r.hasOwnProperty(s)&&(a!=null||o!=null))switch(s){case`value`:p=a;break;case`defaultValue`:m=a;break;case`children`:break;case`dangerouslySetInnerHTML`:if(a!=null)throw Error(i(91));break;default:a!==o&&Nd(e,t,s,a,r,o)}Rt(e,p,m);return;case`option`:for(var h in n)if(p=n[h],n.hasOwnProperty(h)&&p!=null&&!r.hasOwnProperty(h))switch(h){case`selected`:e.selected=!1;break;default:Nd(e,t,h,null,r,p)}for(l in r)if(p=r[l],m=n[l],r.hasOwnProperty(l)&&p!==m&&(p!=null||m!=null))switch(l){case`selected`:e.selected=p&&typeof p!=`function`&&typeof p!=`symbol`;break;default:Nd(e,t,l,p,r,m)}return;case`img`:case`link`:case`area`:case`base`:case`br`:case`col`:case`embed`:case`hr`:case`keygen`:case`meta`:case`param`:case`source`:case`track`:case`wbr`:case`menuitem`:for(var g in n)p=n[g],n.hasOwnProperty(g)&&p!=null&&!r.hasOwnProperty(g)&&Nd(e,t,g,null,r,p);for(u in r)if(p=r[u],m=n[u],r.hasOwnProperty(u)&&p!==m&&(p!=null||m!=null))switch(u){case`children`:case`dangerouslySetInnerHTML`:if(p!=null)throw Error(i(137,t));break;default:Nd(e,t,u,p,r,m)}return;default:if(Wt(t)){for(var _ in n)p=n[_],n.hasOwnProperty(_)&&p!==void 0&&!r.hasOwnProperty(_)&&Pd(e,t,_,void 0,r,p);for(d in r)p=r[d],m=n[d],!r.hasOwnProperty(d)||p===m||p===void 0&&m===void 0||Pd(e,t,d,p,r,m);return}}for(var v in n)p=n[v],n.hasOwnProperty(v)&&p!=null&&!r.hasOwnProperty(v)&&Nd(e,t,v,null,r,p);for(f in r)p=r[f],m=n[f],!r.hasOwnProperty(f)||p===m||p==null&&m==null||Nd(e,t,f,p,r,m)}function Ld(e){switch(e){case`css`:case`script`:case`font`:case`img`:case`image`:case`input`:case`link`:return!0;default:return!1}}function Rd(){if(typeof performance.getEntriesByType==`function`){for(var e=0,t=0,n=performance.getEntriesByType(`resource`),r=0;r<n.length;r++){var i=n[r],a=i.transferSize,o=i.initiatorType,s=i.duration;if(a&&s&&Ld(o)){for(o=0,s=i.responseEnd,r+=1;r<n.length;r++){var c=n[r],l=c.startTime;if(l>s)break;var u=c.transferSize,d=c.initiatorType;u&&Ld(d)&&(c=c.responseEnd,o+=u*(c<s?1:(s-l)/(c-l)))}if(--r,t+=8*(a+o)/(i.duration/1e3),e++,10<e)break}}if(0<e)return t/e/1e6}return navigator.connection&&(e=navigator.connection.downlink,typeof e==`number`)?e:5}var zd=null,Bd=null;function Vd(e){return e.nodeType===9?e:e.ownerDocument}function Hd(e){switch(e){case`http://www.w3.org/2000/svg`:return 1;case`http://www.w3.org/1998/Math/MathML`:return 2;default:return 0}}function Ud(e,t){if(e===0)switch(t){case`svg`:return 1;case`math`:return 2;default:return 0}return e===1&&t===`foreignObject`?0:e}function Wd(e,t){return e===`textarea`||e===`noscript`||typeof t.children==`string`||typeof t.children==`number`||typeof t.children==`bigint`||typeof t.dangerouslySetInnerHTML==`object`&&t.dangerouslySetInnerHTML!==null&&t.dangerouslySetInnerHTML.__html!=null}var Gd=null;function Kd(){var e=window.event;return e&&e.type===`popstate`?e===Gd?!1:(Gd=e,!0):(Gd=null,!1)}var qd=typeof setTimeout==`function`?setTimeout:void 0,Jd=typeof clearTimeout==`function`?clearTimeout:void 0,Yd=typeof Promise==`function`?Promise:void 0,Xd=typeof queueMicrotask==`function`?queueMicrotask:Yd===void 0?qd:function(e){return Yd.resolve(null).then(e).catch(Zd)};function Zd(e){setTimeout(function(){throw e})}function Qd(e){return e===`head`}function $d(e,t){var n=t,r=0;do{var i=n.nextSibling;if(e.removeChild(n),i&&i.nodeType===8)if(n=i.data,n===`/$`||n===`/&`){if(r===0){e.removeChild(i),Mp(t);return}r--}else if(n===`$`||n===`$?`||n===`$~`||n===`$!`||n===`&`)r++;else if(n===`html`)pf(e.ownerDocument.documentElement);else if(n===`head`){n=e.ownerDocument.head,pf(n);for(var a=n.firstChild;a;){var o=a.nextSibling,s=a.nodeName;a[ct]||s===`SCRIPT`||s===`STYLE`||s===`LINK`&&a.rel.toLowerCase()===`stylesheet`||n.removeChild(a),a=o}}else n===`body`&&pf(e.ownerDocument.body);n=i}while(n);Mp(t)}function ef(e,t){var n=e;e=0;do{var r=n.nextSibling;if(n.nodeType===1?t?(n._stashedDisplay=n.style.display,n.style.display=`none`):(n.style.display=n._stashedDisplay||``,n.getAttribute(`style`)===``&&n.removeAttribute(`style`)):n.nodeType===3&&(t?(n._stashedText=n.nodeValue,n.nodeValue=``):n.nodeValue=n._stashedText||``),r&&r.nodeType===8)if(n=r.data,n===`/$`){if(e===0)break;e--}else n!==`$`&&n!==`$?`&&n!==`$~`&&n!==`$!`||e++;n=r}while(n)}function tf(e){var t=e.firstChild;for(t&&t.nodeType===10&&(t=t.nextSibling);t;){var n=t;switch(t=t.nextSibling,n.nodeName){case`HTML`:case`HEAD`:case`BODY`:tf(n),lt(n);continue;case`SCRIPT`:case`STYLE`:continue;case`LINK`:if(n.rel.toLowerCase()===`stylesheet`)continue}e.removeChild(n)}}function nf(e,t,n,r){for(;e.nodeType===1;){var i=n;if(e.nodeName.toLowerCase()!==t.toLowerCase()){if(!r&&(e.nodeName!==`INPUT`||e.type!==`hidden`))break}else if(!r)if(t===`input`&&e.type===`hidden`){var a=i.name==null?null:``+i.name;if(i.type===`hidden`&&e.getAttribute(`name`)===a)return e}else return e;else if(!e[ct])switch(t){case`meta`:if(!e.hasAttribute(`itemprop`))break;return e;case`link`:if(a=e.getAttribute(`rel`),a===`stylesheet`&&e.hasAttribute(`data-precedence`)||a!==i.rel||e.getAttribute(`href`)!==(i.href==null||i.href===``?null:i.href)||e.getAttribute(`crossorigin`)!==(i.crossOrigin==null?null:i.crossOrigin)||e.getAttribute(`title`)!==(i.title==null?null:i.title))break;return e;case`style`:if(e.hasAttribute(`data-precedence`))break;return e;case`script`:if(a=e.getAttribute(`src`),(a!==(i.src==null?null:i.src)||e.getAttribute(`type`)!==(i.type==null?null:i.type)||e.getAttribute(`crossorigin`)!==(i.crossOrigin==null?null:i.crossOrigin))&&a&&e.hasAttribute(`async`)&&!e.hasAttribute(`itemprop`))break;return e;default:return e}if(e=cf(e.nextSibling),e===null)break}return null}function Q(e,t,n){if(t===``)return null;for(;e.nodeType!==3;)if((e.nodeType!==1||e.nodeName!==`INPUT`||e.type!==`hidden`)&&!n||(e=cf(e.nextSibling),e===null))return null;return e}function rf(e,t){for(;e.nodeType!==8;)if((e.nodeType!==1||e.nodeName!==`INPUT`||e.type!==`hidden`)&&!t||(e=cf(e.nextSibling),e===null))return null;return e}function af(e){return e.data===`$?`||e.data===`$~`}function of(e){return e.data===`$!`||e.data===`$?`&&e.ownerDocument.readyState!==`loading`}function sf(e,t){var n=e.ownerDocument;if(e.data===`$~`)e._reactRetry=t;else if(e.data!==`$?`||n.readyState!==`loading`)t();else{var r=function(){t(),n.removeEventListener(`DOMContentLoaded`,r)};n.addEventListener(`DOMContentLoaded`,r),e._reactRetry=r}}function cf(e){for(;e!=null;e=e.nextSibling){var t=e.nodeType;if(t===1||t===3)break;if(t===8){if(t=e.data,t===`$`||t===`$!`||t===`$?`||t===`$~`||t===`&`||t===`F!`||t===`F`)break;if(t===`/$`||t===`/&`)return null}}return e}var lf=null;function uf(e){e=e.nextSibling;for(var t=0;e;){if(e.nodeType===8){var n=e.data;if(n===`/$`||n===`/&`){if(t===0)return cf(e.nextSibling);t--}else n!==`$`&&n!==`$!`&&n!==`$?`&&n!==`$~`&&n!==`&`||t++}e=e.nextSibling}return null}function df(e){e=e.previousSibling;for(var t=0;e;){if(e.nodeType===8){var n=e.data;if(n===`$`||n===`$!`||n===`$?`||n===`$~`||n===`&`){if(t===0)return e;t--}else n!==`/$`&&n!==`/&`||t++}e=e.previousSibling}return null}function ff(e,t,n){switch(t=Vd(n),e){case`html`:if(e=t.documentElement,!e)throw Error(i(452));return e;case`head`:if(e=t.head,!e)throw Error(i(453));return e;case`body`:if(e=t.body,!e)throw Error(i(454));return e;default:throw Error(i(451))}}function pf(e){for(var t=e.attributes;t.length;)e.removeAttributeNode(t[0]);lt(e)}var mf=new Map,hf=new Set;function gf(e){return typeof e.getRootNode==`function`?e.getRootNode():e.nodeType===9?e:e.ownerDocument}var _f=L.d;L.d={f:vf,r:yf,D:Sf,C:Cf,L:wf,m:Tf,X:Ef,S:nee,M:Df};function vf(){var e=_f.f(),t=xu();return e||t}function yf(e){var t=dt(e);t!==null&&t.tag===5&&t.type===`form`?Ss(t):_f.r(e)}var bf=typeof document>`u`?null:document;function xf(e,t,n){var r=bf;if(r&&typeof t==`string`&&t){var i=Nt(t);i=`link[rel="`+e+`"][href="`+i+`"]`,typeof n==`string`&&(i+=`[crossorigin="`+n+`"]`),hf.has(i)||(hf.add(i),e={rel:e,crossOrigin:n,href:t},r.querySelector(i)===null&&(t=r.createElement(`link`),Fd(t,`link`,e),mt(t),r.head.appendChild(t)))}}function Sf(e){_f.D(e),xf(`dns-prefetch`,e,null)}function Cf(e,t){_f.C(e,t),xf(`preconnect`,e,t)}function wf(e,t,n){_f.L(e,t,n);var r=bf;if(r&&e&&t){var i=`link[rel="preload"][as="`+Nt(t)+`"]`;t===`image`&&n&&n.imageSrcSet?(i+=`[imagesrcset="`+Nt(n.imageSrcSet)+`"]`,typeof n.imageSizes==`string`&&(i+=`[imagesizes="`+Nt(n.imageSizes)+`"]`)):i+=`[href="`+Nt(e)+`"]`;var a=i;switch(t){case`style`:a=kf(e);break;case`script`:a=Nf(e)}mf.has(a)||(e=p({rel:`preload`,href:t===`image`&&n&&n.imageSrcSet?void 0:e,as:t},n),mf.set(a,e),r.querySelector(i)!==null||t===`style`&&r.querySelector(Af(a))||t===`script`&&r.querySelector(Pf(a))||(t=r.createElement(`link`),Fd(t,`link`,e),mt(t),r.head.appendChild(t)))}}function Tf(e,t){_f.m(e,t);var n=bf;if(n&&e){var r=t&&typeof t.as==`string`?t.as:`script`,i=`link[rel="modulepreload"][as="`+Nt(r)+`"][href="`+Nt(e)+`"]`,a=i;switch(r){case`audioworklet`:case`paintworklet`:case`serviceworker`:case`sharedworker`:case`worker`:case`script`:a=Nf(e)}if(!mf.has(a)&&(e=p({rel:`modulepreload`,href:e},t),mf.set(a,e),n.querySelector(i)===null)){switch(r){case`audioworklet`:case`paintworklet`:case`serviceworker`:case`sharedworker`:case`worker`:case`script`:if(n.querySelector(Pf(a)))return}r=n.createElement(`link`),Fd(r,`link`,e),mt(r),n.head.appendChild(r)}}}function nee(e,t,n){_f.S(e,t,n);var r=bf;if(r&&e){var i=pt(r).hoistableStyles,a=kf(e);t||=`default`;var o=i.get(a);if(!o){var s={loading:0,preload:null};if(o=r.querySelector(Af(a)))s.loading=5;else{e=p({rel:`stylesheet`,href:e,"data-precedence":t},n),(n=mf.get(a))&&Lf(e,n);var c=o=r.createElement(`link`);mt(c),Fd(c,`link`,e),c._p=new Promise(function(e,t){c.onload=e,c.onerror=t}),c.addEventListener(`load`,function(){s.loading|=1}),c.addEventListener(`error`,function(){s.loading|=2}),s.loading|=4,If(o,t,r)}o={type:`stylesheet`,instance:o,count:1,state:s},i.set(a,o)}}}function Ef(e,t){_f.X(e,t);var n=bf;if(n&&e){var r=pt(n).hoistableScripts,i=Nf(e),a=r.get(i);a||(a=n.querySelector(Pf(i)),a||(e=p({src:e,async:!0},t),(t=mf.get(i))&&Rf(e,t),a=n.createElement(`script`),mt(a),Fd(a,`link`,e),n.head.appendChild(a)),a={type:`script`,instance:a,count:1,state:null},r.set(i,a))}}function Df(e,t){_f.M(e,t);var n=bf;if(n&&e){var r=pt(n).hoistableScripts,i=Nf(e),a=r.get(i);a||(a=n.querySelector(Pf(i)),a||(e=p({src:e,async:!0,type:`module`},t),(t=mf.get(i))&&Rf(e,t),a=n.createElement(`script`),mt(a),Fd(a,`link`,e),n.head.appendChild(a)),a={type:`script`,instance:a,count:1,state:null},r.set(i,a))}}function Of(e,t,n,r){var a=(a=ie.current)?gf(a):null;if(!a)throw Error(i(446));switch(e){case`meta`:case`title`:return null;case`style`:return typeof n.precedence==`string`&&typeof n.href==`string`?(t=kf(n.href),n=pt(a).hoistableStyles,r=n.get(t),r||(r={type:`style`,instance:null,count:0,state:null},n.set(t,r)),r):{type:`void`,instance:null,count:0,state:null};case`link`:if(n.rel===`stylesheet`&&typeof n.href==`string`&&typeof n.precedence==`string`){e=kf(n.href);var o=pt(a).hoistableStyles,s=o.get(e);if(s||(a=a.ownerDocument||a,s={type:`stylesheet`,instance:null,count:0,state:{loading:0,preload:null}},o.set(e,s),(o=a.querySelector(Af(e)))&&!o._p&&(s.instance=o,s.state.loading=5),mf.has(e)||(n={rel:`preload`,as:`style`,href:n.href,crossOrigin:n.crossOrigin,integrity:n.integrity,media:n.media,hrefLang:n.hrefLang,referrerPolicy:n.referrerPolicy},mf.set(e,n),o||Mf(a,e,n,s.state))),t&&r===null)throw Error(i(528,``));return s}if(t&&r!==null)throw Error(i(529,``));return null;case`script`:return t=n.async,n=n.src,typeof n==`string`&&t&&typeof t!=`function`&&typeof t!=`symbol`?(t=Nf(n),n=pt(a).hoistableScripts,r=n.get(t),r||(r={type:`script`,instance:null,count:0,state:null},n.set(t,r)),r):{type:`void`,instance:null,count:0,state:null};default:throw Error(i(444,e))}}function kf(e){return`href="`+Nt(e)+`"`}function Af(e){return`link[rel="stylesheet"][`+e+`]`}function jf(e){return p({},e,{"data-precedence":e.precedence,precedence:null})}function Mf(e,t,n,r){e.querySelector(`link[rel="preload"][as="style"][`+t+`]`)?r.loading=1:(t=e.createElement(`link`),r.preload=t,t.addEventListener(`load`,function(){return r.loading|=1}),t.addEventListener(`error`,function(){return r.loading|=2}),Fd(t,`link`,n),mt(t),e.head.appendChild(t))}function Nf(e){return`[src="`+Nt(e)+`"]`}function Pf(e){return`script[async]`+e}function Ff(e,t,n){if(t.count++,t.instance===null)switch(t.type){case`style`:var r=e.querySelector(`style[data-href~="`+Nt(n.href)+`"]`);if(r)return t.instance=r,mt(r),r;var a=p({},n,{"data-href":n.href,"data-precedence":n.precedence,href:null,precedence:null});return r=(e.ownerDocument||e).createElement(`style`),mt(r),Fd(r,`style`,a),If(r,n.precedence,e),t.instance=r;case`stylesheet`:a=kf(n.href);var o=e.querySelector(Af(a));if(o)return t.state.loading|=4,t.instance=o,mt(o),o;r=jf(n),(a=mf.get(a))&&Lf(r,a),o=(e.ownerDocument||e).createElement(`link`),mt(o);var s=o;return s._p=new Promise(function(e,t){s.onload=e,s.onerror=t}),Fd(o,`link`,r),t.state.loading|=4,If(o,n.precedence,e),t.instance=o;case`script`:return o=Nf(n.src),(a=e.querySelector(Pf(o)))?(t.instance=a,mt(a),a):(r=n,(a=mf.get(o))&&(r=p({},n),Rf(r,a)),e=e.ownerDocument||e,a=e.createElement(`script`),mt(a),Fd(a,`link`,r),e.head.appendChild(a),t.instance=a);case`void`:return null;default:throw Error(i(443,t.type))}else t.type===`stylesheet`&&!(t.state.loading&4)&&(r=t.instance,t.state.loading|=4,If(r,n.precedence,e));return t.instance}function If(e,t,n){for(var r=n.querySelectorAll(`link[rel="stylesheet"][data-precedence],style[data-precedence]`),i=r.length?r[r.length-1]:null,a=i,o=0;o<r.length;o++){var s=r[o];if(s.dataset.precedence===t)a=s;else if(a!==i)break}a?a.parentNode.insertBefore(e,a.nextSibling):(t=n.nodeType===9?n.head:n,t.insertBefore(e,t.firstChild))}function Lf(e,t){e.crossOrigin??=t.crossOrigin,e.referrerPolicy??=t.referrerPolicy,e.title??=t.title}function Rf(e,t){e.crossOrigin??=t.crossOrigin,e.referrerPolicy??=t.referrerPolicy,e.integrity??=t.integrity}var zf=null;function Bf(e,t,n){if(zf===null){var r=new Map,i=zf=new Map;i.set(n,r)}else i=zf,r=i.get(n),r||(r=new Map,i.set(n,r));if(r.has(e))return r;for(r.set(e,null),n=n.getElementsByTagName(e),i=0;i<n.length;i++){var a=n[i];if(!(a[ct]||a[tt]||e===`link`&&a.getAttribute(`rel`)===`stylesheet`)&&a.namespaceURI!==`http://www.w3.org/2000/svg`){var o=a.getAttribute(t)||``;o=e+o;var s=r.get(o);s?s.push(a):r.set(o,[a])}}return r}function Vf(e,t,n){e=e.ownerDocument||e,e.head.insertBefore(n,t===`title`?e.querySelector(`head > title`):null)}function Hf(e,t,n){if(n===1||t.itemProp!=null)return!1;switch(e){case`meta`:case`title`:return!0;case`style`:if(typeof t.precedence!=`string`||typeof t.href!=`string`||t.href===``)break;return!0;case`link`:if(typeof t.rel!=`string`||typeof t.href!=`string`||t.href===``||t.onLoad||t.onError)break;switch(t.rel){case`stylesheet`:return e=t.disabled,typeof t.precedence==`string`&&e==null;default:return!0}case`script`:if(t.async&&typeof t.async!=`function`&&typeof t.async!=`symbol`&&!t.onLoad&&!t.onError&&t.src&&typeof t.src==`string`)return!0}return!1}function Uf(e){return!(e.type===`stylesheet`&&!(e.state.loading&3))}function Wf(e,t,n,r){if(n.type===`stylesheet`&&(typeof r.media!=`string`||!1!==matchMedia(r.media).matches)&&!(n.state.loading&4)){if(n.instance===null){var i=kf(r.href),a=t.querySelector(Af(i));if(a){t=a._p,typeof t==`object`&&t&&typeof t.then==`function`&&(e.count++,e=qf.bind(e),t.then(e,e)),n.state.loading|=4,n.instance=a,mt(a);return}a=t.ownerDocument||t,r=jf(r),(i=mf.get(i))&&Lf(r,i),a=a.createElement(`link`),mt(a);var o=a;o._p=new Promise(function(e,t){o.onload=e,o.onerror=t}),Fd(a,`link`,r),n.instance=a}e.stylesheets===null&&(e.stylesheets=new Map),e.stylesheets.set(n,t),(t=n.state.preload)&&!(n.state.loading&3)&&(e.count++,n=qf.bind(e),t.addEventListener(`load`,n),t.addEventListener(`error`,n))}}var Gf=0;function Kf(e,t){return e.stylesheets&&e.count===0&&Yf(e,e.stylesheets),0<e.count||0<e.imgCount?function(n){var r=setTimeout(function(){if(e.stylesheets&&Yf(e,e.stylesheets),e.unsuspend){var t=e.unsuspend;e.unsuspend=null,t()}},6e4+t);0<e.imgBytes&&Gf===0&&(Gf=62500*Rd());var i=setTimeout(function(){if(e.waitingForImages=!1,e.count===0&&(e.stylesheets&&Yf(e,e.stylesheets),e.unsuspend)){var t=e.unsuspend;e.unsuspend=null,t()}},(e.imgBytes>Gf?50:800)+t);return e.unsuspend=n,function(){e.unsuspend=null,clearTimeout(r),clearTimeout(i)}}:null}function qf(){if(this.count--,this.count===0&&(this.imgCount===0||!this.waitingForImages)){if(this.stylesheets)Yf(this,this.stylesheets);else if(this.unsuspend){var e=this.unsuspend;this.unsuspend=null,e()}}}var Jf=null;function Yf(e,t){e.stylesheets=null,e.unsuspend!==null&&(e.count++,Jf=new Map,t.forEach(Xf,e),Jf=null,qf.call(e))}function Xf(e,t){if(!(t.state.loading&4)){var n=Jf.get(e);if(n)var r=n.get(null);else{n=new Map,Jf.set(e,n);for(var i=e.querySelectorAll(`link[data-precedence],style[data-precedence]`),a=0;a<i.length;a++){var o=i[a];(o.nodeName===`LINK`||o.getAttribute(`media`)!==`not all`)&&(n.set(o.dataset.precedence,o),r=o)}r&&n.set(null,r)}i=t.instance,o=i.getAttribute(`data-precedence`),a=n.get(o)||r,a===r&&n.set(null,i),n.set(o,i),this.count++,r=qf.bind(this),i.addEventListener(`load`,r),i.addEventListener(`error`,r),a?a.parentNode.insertBefore(i,a.nextSibling):(e=e.nodeType===9?e.head:e,e.insertBefore(i,e.firstChild)),t.state.loading|=4}}var Zf={$$typeof:C,Provider:null,Consumer:null,_currentValue:R,_currentValue2:R,_threadCount:0};function Qf(e,t,n,r,i,a,o,s,c){this.tag=1,this.containerInfo=e,this.pingCache=this.current=this.pendingChildren=null,this.timeoutHandle=-1,this.callbackNode=this.next=this.pendingContext=this.context=this.cancelPendingCommit=null,this.callbackPriority=0,this.expirationTimes=Ge(-1),this.entangledLanes=this.shellSuspendCounter=this.errorRecoveryDisabledLanes=this.expiredLanes=this.warmLanes=this.pingedLanes=this.suspendedLanes=this.pendingLanes=0,this.entanglements=Ge(0),this.hiddenUpdates=Ge(null),this.identifierPrefix=r,this.onUncaughtError=i,this.onCaughtError=a,this.onRecoverableError=o,this.pooledCache=null,this.pooledCacheLanes=0,this.formState=c,this.incompleteTransitions=new Map}function $f(e,t,n,r,i,a,o,s,c,l,u,d){return e=new Qf(e,t,n,o,c,l,u,d,s),t=1,!0===a&&(t|=24),a=ni(3,null,null,t),e.current=a,a.stateNode=e,t=ra(),t.refCount++,e.pooledCache=t,t.refCount++,a.memoizedState={element:r,isDehydrated:n,cache:t},Ia(a),e}function ep(e){return e?(e=ei,e):ei}function tp(e,t,n,r,i,a){i=ep(i),r.context===null?r.context=i:r.pendingContext=i,r=Ra(t),r.payload={element:n},a=a===void 0?null:a,a!==null&&(r.callback=a),n=za(e,r,t),n!==null&&(gu(n,e,t),Ba(n,e,t))}function np(e,t){if(e=e.memoizedState,e!==null&&e.dehydrated!==null){var n=e.retryLane;e.retryLane=n!==0&&n<t?n:t}}function rp(e,t){np(e,t),(e=e.alternate)&&np(e,t)}function ip(e){if(e.tag===13||e.tag===31){var t=Zr(e,67108864);t!==null&&gu(t,e,67108864),rp(e,67108864)}}function ap(e){if(e.tag===13||e.tag===31){var t=mu();t=Ze(t);var n=Zr(e,t);n!==null&&gu(n,e,t),rp(e,t)}}var op=!0;function sp(e,t,n,r){var i=I.T;I.T=null;var a=L.p;try{L.p=2,lp(e,t,n,r)}finally{L.p=a,I.T=i}}function cp(e,t,n,r){var i=I.T;I.T=null;var a=L.p;try{L.p=8,lp(e,t,n,r)}finally{L.p=a,I.T=i}}function lp(e,t,n,r){if(op){var i=up(r);if(i===null)Td(e,t,r,dp,n),Sp(e,r);else if(wp(i,e,t,n,r))r.stopPropagation();else if(Sp(e,r),t&4&&-1<xp.indexOf(e)){for(;i!==null;){var a=dt(i);if(a!==null)switch(a.tag){case 3:if(a=a.stateNode,a.current.memoizedState.isDehydrated){var o=Be(a.pendingLanes);if(o!==0){var s=a;for(s.pendingLanes|=2,s.entangledLanes|=2;o;){var c=1<<31-Ne(o);s.entanglements[1]|=c,o&=~c}ad(a),!(Fl&6)&&(nu=xe()+500,od(0,!1))}}break;case 31:case 13:s=Zr(a,2),s!==null&&gu(s,a,2),xu(),rp(a,2)}if(a=up(r),a===null&&Td(e,t,r,dp,n),a===i)break;i=a}i!==null&&r.stopPropagation()}else Td(e,t,r,null,n)}}function up(e){return e=Xt(e),fp(e)}var dp=null;function fp(e){if(dp=null,e=ut(e),e!==null){var t=o(e);if(t===null)e=null;else{var n=t.tag;if(n===13){if(e=s(t),e!==null)return e;e=null}else if(n===31){if(e=c(t),e!==null)return e;e=null}else if(n===3){if(t.stateNode.current.memoizedState.isDehydrated)return t.tag===3?t.stateNode.containerInfo:null;e=null}else t!==e&&(e=null)}}return dp=e,null}function pp(e){switch(e){case`beforetoggle`:case`cancel`:case`click`:case`close`:case`contextmenu`:case`copy`:case`cut`:case`auxclick`:case`dblclick`:case`dragend`:case`dragstart`:case`drop`:case`focusin`:case`focusout`:case`input`:case`invalid`:case`keydown`:case`keypress`:case`keyup`:case`mousedown`:case`mouseup`:case`paste`:case`pause`:case`play`:case`pointercancel`:case`pointerdown`:case`pointerup`:case`ratechange`:case`reset`:case`resize`:case`seeked`:case`submit`:case`toggle`:case`touchcancel`:case`touchend`:case`touchstart`:case`volumechange`:case`change`:case`selectionchange`:case`textInput`:case`compositionstart`:case`compositionend`:case`compositionupdate`:case`beforeblur`:case`afterblur`:case`beforeinput`:case`blur`:case`fullscreenchange`:case`focus`:case`hashchange`:case`popstate`:case`select`:case`selectstart`:return 2;case`drag`:case`dragenter`:case`dragexit`:case`dragleave`:case`dragover`:case`mousemove`:case`mouseout`:case`mouseover`:case`pointermove`:case`pointerout`:case`pointerover`:case`scroll`:case`touchmove`:case`wheel`:case`mouseenter`:case`mouseleave`:case`pointerenter`:case`pointerleave`:return 8;case`message`:switch(Se()){case Ce:return 2;case we:return 8;case Te:case Ee:return 32;case De:return 268435456;default:return 32}default:return 32}}var mp=!1,hp=null,gp=null,_p=null,vp=new Map,yp=new Map,bp=[],xp=`mousedown mouseup touchcancel touchend touchstart auxclick dblclick pointercancel pointerdown pointerup dragend dragstart drop compositionend compositionstart keydown keypress keyup input textInput copy cut paste click change contextmenu reset`.split(` `);function Sp(e,t){switch(e){case`focusin`:case`focusout`:hp=null;break;case`dragenter`:case`dragleave`:gp=null;break;case`mouseover`:case`mouseout`:_p=null;break;case`pointerover`:case`pointerout`:vp.delete(t.pointerId);break;case`gotpointercapture`:case`lostpointercapture`:yp.delete(t.pointerId)}}function Cp(e,t,n,r,i,a){return e===null||e.nativeEvent!==a?(e={blockedOn:t,domEventName:n,eventSystemFlags:r,nativeEvent:a,targetContainers:[i]},t!==null&&(t=dt(t),t!==null&&ip(t)),e):(e.eventSystemFlags|=r,t=e.targetContainers,i!==null&&t.indexOf(i)===-1&&t.push(i),e)}function wp(e,t,n,r,i){switch(t){case`focusin`:return hp=Cp(hp,e,t,n,r,i),!0;case`dragenter`:return gp=Cp(gp,e,t,n,r,i),!0;case`mouseover`:return _p=Cp(_p,e,t,n,r,i),!0;case`pointerover`:var a=i.pointerId;return vp.set(a,Cp(vp.get(a)||null,e,t,n,r,i)),!0;case`gotpointercapture`:return a=i.pointerId,yp.set(a,Cp(yp.get(a)||null,e,t,n,r,i)),!0}return!1}function Tp(e){var t=ut(e.target);if(t!==null){var n=o(t);if(n!==null){if(t=n.tag,t===13){if(t=s(n),t!==null){e.blockedOn=t,et(e.priority,function(){ap(n)});return}}else if(t===31){if(t=c(n),t!==null){e.blockedOn=t,et(e.priority,function(){ap(n)});return}}else if(t===3&&n.stateNode.current.memoizedState.isDehydrated){e.blockedOn=n.tag===3?n.stateNode.containerInfo:null;return}}}e.blockedOn=null}function Ep(e){if(e.blockedOn!==null)return!1;for(var t=e.targetContainers;0<t.length;){var n=up(e.nativeEvent);if(n===null){n=e.nativeEvent;var r=new n.constructor(n.type,n);Yt=r,n.target.dispatchEvent(r),Yt=null}else return t=dt(n),t!==null&&ip(t),e.blockedOn=n,!1;t.shift()}return!0}function Dp(e,t,n){Ep(e)&&n.delete(t)}function Op(){mp=!1,hp!==null&&Ep(hp)&&(hp=null),gp!==null&&Ep(gp)&&(gp=null),_p!==null&&Ep(_p)&&(_p=null),vp.forEach(Dp),yp.forEach(Dp)}function kp(e,n){e.blockedOn===n&&(e.blockedOn=null,mp||(mp=!0,t.unstable_scheduleCallback(t.unstable_NormalPriority,Op)))}var Ap=null;function jp(e){Ap!==e&&(Ap=e,t.unstable_scheduleCallback(t.unstable_NormalPriority,function(){Ap===e&&(Ap=null);for(var t=0;t<e.length;t+=3){var n=e[t],r=e[t+1],i=e[t+2];if(typeof r!=`function`){if(fp(r||n)===null)continue;break}var a=dt(n);a!==null&&(e.splice(t,3),t-=3,bs(a,{pending:!0,data:i,method:n.method,action:r},r,i))}}))}function Mp(e){function t(t){return kp(t,e)}hp!==null&&kp(hp,e),gp!==null&&kp(gp,e),_p!==null&&kp(_p,e),vp.forEach(t),yp.forEach(t);for(var n=0;n<bp.length;n++){var r=bp[n];r.blockedOn===e&&(r.blockedOn=null)}for(;0<bp.length&&(n=bp[0],n.blockedOn===null);)Tp(n),n.blockedOn===null&&bp.shift();if(n=(e.ownerDocument||e).$$reactFormReplay,n!=null)for(r=0;r<n.length;r+=3){var i=n[r],a=n[r+1],o=i[nt]||null;if(typeof a==`function`)o||jp(n);else if(o){var s=null;if(a&&a.hasAttribute(`formAction`)){if(i=a,o=a[nt]||null)s=o.formAction;else if(fp(i)!==null)continue}else s=o.action;typeof s==`function`?n[r+1]=s:(n.splice(r,3),r-=3),jp(n)}}}function Np(){function e(e){e.canIntercept&&e.info===`react-transition`&&e.intercept({handler:function(){return new Promise(function(e){return i=e})},focusReset:`manual`,scroll:`manual`})}function t(){i!==null&&(i(),i=null),r||setTimeout(n,20)}function n(){if(!r&&!navigation.transition){var e=navigation.currentEntry;e&&e.url!=null&&navigation.navigate(e.url,{state:e.getState(),info:`react-transition`,history:`replace`})}}if(typeof navigation==`object`){var r=!1,i=null;return navigation.addEventListener(`navigate`,e),navigation.addEventListener(`navigatesuccess`,t),navigation.addEventListener(`navigateerror`,t),setTimeout(n,100),function(){r=!0,navigation.removeEventListener(`navigate`,e),navigation.removeEventListener(`navigatesuccess`,t),navigation.removeEventListener(`navigateerror`,t),i!==null&&(i(),i=null)}}}function Pp(e){this._internalRoot=e}Fp.prototype.render=Pp.prototype.render=function(e){var t=this._internalRoot;if(t===null)throw Error(i(409));var n=t.current;tp(n,mu(),e,t,null,null)},Fp.prototype.unmount=Pp.prototype.unmount=function(){var e=this._internalRoot;if(e!==null){this._internalRoot=null;var t=e.containerInfo;tp(e.current,2,null,e,null,null),xu(),t[rt]=null}};function Fp(e){this._internalRoot=e}Fp.prototype.unstable_scheduleHydration=function(e){if(e){var t=$e();e={blockedOn:null,target:e,priority:t};for(var n=0;n<bp.length&&t!==0&&t<bp[n].priority;n++);bp.splice(n,0,e),n===0&&Tp(e)}};var Ip=n.version;if(Ip!==`19.2.4`)throw Error(i(527,Ip,`19.2.4`));L.findDOMNode=function(e){var t=e._reactInternals;if(t===void 0)throw typeof e.render==`function`?Error(i(188)):(e=Object.keys(e).join(`,`),Error(i(268,e)));return e=u(t),e=e===null?null:d(e),e=e===null?null:e.stateNode,e};var Lp={bundleType:0,version:`19.2.4`,rendererPackageName:`react-dom`,currentDispatcherRef:I,reconcilerVersion:`19.2.4`};if(typeof __REACT_DEVTOOLS_GLOBAL_HOOK__<`u`){var Rp=__REACT_DEVTOOLS_GLOBAL_HOOK__;if(!Rp.isDisabled&&Rp.supportsFiber)try{Ae=Rp.inject(Lp),je=Rp}catch{}}e.createRoot=function(e,t){if(!a(e))throw Error(i(299));var n=!1,r=``,o=eee,s=Us,c=Ws;return t!=null&&(!0===t.unstable_strictMode&&(n=!0),t.identifierPrefix!==void 0&&(r=t.identifierPrefix),t.onUncaughtError!==void 0&&(o=t.onUncaughtError),t.onCaughtError!==void 0&&(s=t.onCaughtError),t.onRecoverableError!==void 0&&(c=t.onRecoverableError)),t=$f(e,1,!1,null,null,n,r,null,o,s,c,Np),e[rt]=t.current,Cd(e),new Pp(t)}})),v=o(((e,t)=>{function n(){if(!(typeof __REACT_DEVTOOLS_GLOBAL_HOOK__>`u`||typeof __REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE!=`function`))try{__REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE(n)}catch(e){console.error(e)}}n(),t.exports=_()})),y=l(f()),b=v(),x=e=>typeof e==`string`,S=()=>{let e,t,n=new Promise((n,r)=>{e=n,t=r});return n.resolve=e,n.reject=t,n},C=e=>e==null?``:``+e,w=(e,t,n)=>{e.forEach(e=>{t[e]&&(n[e]=t[e])})},T=/###/g,E=e=>e&&e.indexOf(`###`)>-1?e.replace(T,`.`):e,D=e=>!e||x(e),O=(e,t,n)=>{let r=x(t)?t.split(`.`):t,i=0;for(;i<r.length-1;){if(D(e))return{};let t=E(r[i]);!e[t]&&n&&(e[t]=new n),e=Object.prototype.hasOwnProperty.call(e,t)?e[t]:{},++i}return D(e)?{}:{obj:e,k:E(r[i])}},k=(e,t,n)=>{let{obj:r,k:i}=O(e,t,Object);if(r!==void 0||t.length===1){r[i]=n;return}let a=t[t.length-1],o=t.slice(0,t.length-1),s=O(e,o,Object);for(;s.obj===void 0&&o.length;)a=`${o[o.length-1]}.${a}`,o=o.slice(0,o.length-1),s=O(e,o,Object),s?.obj&&s.obj[`${s.k}.${a}`]!==void 0&&(s.obj=void 0);s.obj[`${s.k}.${a}`]=n},A=(e,t,n,r)=>{let{obj:i,k:a}=O(e,t,Object);i[a]=i[a]||[],i[a].push(n)},j=(e,t)=>{let{obj:n,k:r}=O(e,t);if(n&&Object.prototype.hasOwnProperty.call(n,r))return n[r]},M=(e,t,n)=>{let r=j(e,n);return r===void 0?j(t,n):r},N=(e,t,n)=>{for(let r in t)r!==`__proto__`&&r!==`constructor`&&(r in e?x(e[r])||e[r]instanceof String||x(t[r])||t[r]instanceof String?n&&(e[r]=t[r]):N(e[r],t[r],n):e[r]=t[r]);return e},P=e=>e.replace(/[\-\[\]\/\{\}\(\)\*\+\?\.\\\^\$\|]/g,`\\$&`),F={"&":`&amp;`,"<":`&lt;`,">":`&gt;`,'"':`&quot;`,"'":`&#39;`,"/":`&#x2F;`},I=e=>x(e)?e.replace(/[&<>"'\/]/g,e=>F[e]):e,L=class{constructor(e){this.capacity=e,this.regExpMap=new Map,this.regExpQueue=[]}getRegExp(e){let t=this.regExpMap.get(e);if(t!==void 0)return t;let n=new RegExp(e);return this.regExpQueue.length===this.capacity&&this.regExpMap.delete(this.regExpQueue.shift()),this.regExpMap.set(e,n),this.regExpQueue.push(e),n}},R=[` `,`,`,`?`,`!`,`;`],z=new L(20),B=(e,t,n)=>{t||=``,n||=``;let r=R.filter(e=>t.indexOf(e)<0&&n.indexOf(e)<0);if(r.length===0)return!0;let i=z.getRegExp(`(${r.map(e=>e===`?`?`\\?`:e).join(`|`)})`),a=!i.test(e);if(!a){let t=e.indexOf(n);t>0&&!i.test(e.substring(0,t))&&(a=!0)}return a},V=(e,t,n=`.`)=>{if(!e)return;if(e[t])return Object.prototype.hasOwnProperty.call(e,t)?e[t]:void 0;let r=t.split(n),i=e;for(let e=0;e<r.length;){if(!i||typeof i!=`object`)return;let t,a=``;for(let o=e;o<r.length;++o)if(o!==e&&(a+=n),a+=r[o],t=i[a],t!==void 0){if([`string`,`number`,`boolean`].indexOf(typeof t)>-1&&o<r.length-1)continue;e+=o-e+1;break}i=t}return i},ee=e=>e?.replace(`_`,`-`),te={type:`logger`,log(e){this.output(`log`,e)},warn(e){this.output(`warn`,e)},error(e){this.output(`error`,e)},output(e,t){console?.[e]?.apply?.(console,t)}},ne=new class e{constructor(e,t={}){this.init(e,t)}init(e,t={}){this.prefix=t.prefix||`i18next:`,this.logger=e||te,this.options=t,this.debug=t.debug}log(...e){return this.forward(e,`log`,``,!0)}warn(...e){return this.forward(e,`warn`,``,!0)}error(...e){return this.forward(e,`error`,``)}deprecate(...e){return this.forward(e,`warn`,`WARNING DEPRECATED: `,!0)}forward(e,t,n,r){return r&&!this.debug?null:(x(e[0])&&(e[0]=`${n}${this.prefix} ${e[0]}`),this.logger[t](e))}create(t){return new e(this.logger,{prefix:`${this.prefix}:${t}:`,...this.options})}clone(t){return t||=this.options,t.prefix=t.prefix||this.prefix,new e(this.logger,t)}},re=class{constructor(){this.observers={}}on(e,t){return e.split(` `).forEach(e=>{this.observers[e]||(this.observers[e]=new Map);let n=this.observers[e].get(t)||0;this.observers[e].set(t,n+1)}),this}off(e,t){if(this.observers[e]){if(!t){delete this.observers[e];return}this.observers[e].delete(t)}}emit(e,...t){this.observers[e]&&Array.from(this.observers[e].entries()).forEach(([e,n])=>{for(let r=0;r<n;r++)e(...t)}),this.observers[`*`]&&Array.from(this.observers[`*`].entries()).forEach(([n,r])=>{for(let i=0;i<r;i++)n.apply(n,[e,...t])})}},ie=class extends re{constructor(e,t={ns:[`translation`],defaultNS:`translation`}){super(),this.data=e||{},this.options=t,this.options.keySeparator===void 0&&(this.options.keySeparator=`.`),this.options.ignoreJSONStructure===void 0&&(this.options.ignoreJSONStructure=!0)}addNamespaces(e){this.options.ns.indexOf(e)<0&&this.options.ns.push(e)}removeNamespaces(e){let t=this.options.ns.indexOf(e);t>-1&&this.options.ns.splice(t,1)}getResource(e,t,n,r={}){let i=r.keySeparator===void 0?this.options.keySeparator:r.keySeparator,a=r.ignoreJSONStructure===void 0?this.options.ignoreJSONStructure:r.ignoreJSONStructure,o;e.indexOf(`.`)>-1?o=e.split(`.`):(o=[e,t],n&&(Array.isArray(n)?o.push(...n):x(n)&&i?o.push(...n.split(i)):o.push(n)));let s=j(this.data,o);return!s&&!t&&!n&&e.indexOf(`.`)>-1&&(e=o[0],t=o[1],n=o.slice(2).join(`.`)),s||!a||!x(n)?s:V(this.data?.[e]?.[t],n,i)}addResource(e,t,n,r,i={silent:!1}){let a=i.keySeparator===void 0?this.options.keySeparator:i.keySeparator,o=[e,t];n&&(o=o.concat(a?n.split(a):n)),e.indexOf(`.`)>-1&&(o=e.split(`.`),r=t,t=o[1]),this.addNamespaces(t),k(this.data,o,r),i.silent||this.emit(`added`,e,t,n,r)}addResources(e,t,n,r={silent:!1}){for(let r in n)(x(n[r])||Array.isArray(n[r]))&&this.addResource(e,t,r,n[r],{silent:!0});r.silent||this.emit(`added`,e,t,n)}addResourceBundle(e,t,n,r,i,a={silent:!1,skipCopy:!1}){let o=[e,t];e.indexOf(`.`)>-1&&(o=e.split(`.`),r=n,n=t,t=o[1]),this.addNamespaces(t);let s=j(this.data,o)||{};a.skipCopy||(n=JSON.parse(JSON.stringify(n))),r?N(s,n,i):s={...s,...n},k(this.data,o,s),a.silent||this.emit(`added`,e,t,n)}removeResourceBundle(e,t){this.hasResourceBundle(e,t)&&delete this.data[e][t],this.removeNamespaces(t),this.emit(`removed`,e,t)}hasResourceBundle(e,t){return this.getResource(e,t)!==void 0}getResourceBundle(e,t){return t||=this.options.defaultNS,this.getResource(e,t)}getDataByLanguage(e){return this.data[e]}hasLanguageSomeTranslations(e){let t=this.getDataByLanguage(e);return!!(t&&Object.keys(t)||[]).find(e=>t[e]&&Object.keys(t[e]).length>0)}toJSON(){return this.data}},ae={processors:{},addPostProcessor(e){this.processors[e.name]=e},handle(e,t,n,r,i){return e.forEach(e=>{t=this.processors[e]?.process(t,n,r,i)??t}),t}},oe=Symbol(`i18next/PATH_KEY`);function se(){let e=[],t=Object.create(null),n;return t.get=(r,i)=>(n?.revoke?.(),i===oe?e:(e.push(i),n=Proxy.revocable(r,t),n.proxy)),Proxy.revocable(Object.create(null),t).proxy}function H(e,t){let{[oe]:n}=e(se());return n.join(t?.keySeparator??`.`)}var ce={},le=e=>!x(e)&&typeof e!=`boolean`&&typeof e!=`number`,ue=class e extends re{constructor(e,t={}){super(),w([`resourceStore`,`languageUtils`,`pluralResolver`,`interpolator`,`backendConnector`,`i18nFormat`,`utils`],e,this),this.options=t,this.options.keySeparator===void 0&&(this.options.keySeparator=`.`),this.logger=ne.create(`translator`)}changeLanguage(e){e&&(this.language=e)}exists(e,t={interpolation:{}}){let n={...t};if(e==null)return!1;let r=this.resolve(e,n);if(r?.res===void 0)return!1;let i=le(r.res);return!(n.returnObjects===!1&&i)}extractFromKey(e,t){let n=t.nsSeparator===void 0?this.options.nsSeparator:t.nsSeparator;n===void 0&&(n=`:`);let r=t.keySeparator===void 0?this.options.keySeparator:t.keySeparator,i=t.ns||this.options.defaultNS||[],a=n&&e.indexOf(n)>-1,o=!this.options.userDefinedKeySeparator&&!t.keySeparator&&!this.options.userDefinedNsSeparator&&!t.nsSeparator&&!B(e,n,r);if(a&&!o){let t=e.match(this.interpolator.nestingRegexp);if(t&&t.length>0)return{key:e,namespaces:x(i)?[i]:i};let a=e.split(n);(n!==r||n===r&&this.options.ns.indexOf(a[0])>-1)&&(i=a.shift()),e=a.join(r)}return{key:e,namespaces:x(i)?[i]:i}}translate(t,n,r){let i=typeof n==`object`?{...n}:n;if(typeof i!=`object`&&this.options.overloadTranslationOptionHandler&&(i=this.options.overloadTranslationOptionHandler(arguments)),typeof i==`object`&&(i={...i}),i||={},t==null)return``;typeof t==`function`&&(t=H(t,{...this.options,...i})),Array.isArray(t)||(t=[String(t)]);let a=i.returnDetails===void 0?this.options.returnDetails:i.returnDetails,o=i.keySeparator===void 0?this.options.keySeparator:i.keySeparator,{key:s,namespaces:c}=this.extractFromKey(t[t.length-1],i),l=c[c.length-1],u=i.nsSeparator===void 0?this.options.nsSeparator:i.nsSeparator;u===void 0&&(u=`:`);let d=i.lng||this.language,f=i.appendNamespaceToCIMode||this.options.appendNamespaceToCIMode;if(d?.toLowerCase()===`cimode`)return f?a?{res:`${l}${u}${s}`,usedKey:s,exactUsedKey:s,usedLng:d,usedNS:l,usedParams:this.getUsedParamsDetails(i)}:`${l}${u}${s}`:a?{res:s,usedKey:s,exactUsedKey:s,usedLng:d,usedNS:l,usedParams:this.getUsedParamsDetails(i)}:s;let p=this.resolve(t,i),m=p?.res,h=p?.usedKey||s,g=p?.exactUsedKey||s,_=[`[object Number]`,`[object Function]`,`[object RegExp]`],v=i.joinArrays===void 0?this.options.joinArrays:i.joinArrays,y=!this.i18nFormat||this.i18nFormat.handleAsObject,b=i.count!==void 0&&!x(i.count),S=e.hasDefaultValue(i),C=b?this.pluralResolver.getSuffix(d,i.count,i):``,w=i.ordinal&&b?this.pluralResolver.getSuffix(d,i.count,{ordinal:!1}):``,T=b&&!i.ordinal&&i.count===0,E=T&&i[`defaultValue${this.options.pluralSeparator}zero`]||i[`defaultValue${C}`]||i[`defaultValue${w}`]||i.defaultValue,D=m;y&&!m&&S&&(D=E);let O=le(D),k=Object.prototype.toString.apply(D);if(y&&D&&O&&_.indexOf(k)<0&&!(x(v)&&Array.isArray(D))){if(!i.returnObjects&&!this.options.returnObjects){this.options.returnedObjectHandler||this.logger.warn(`accessing an object - but returnObjects options is not enabled!`);let e=this.options.returnedObjectHandler?this.options.returnedObjectHandler(h,D,{...i,ns:c}):`key '${s} (${this.language})' returned an object instead of string.`;return a?(p.res=e,p.usedParams=this.getUsedParamsDetails(i),p):e}if(o){let e=Array.isArray(D),t=e?[]:{},n=e?g:h;for(let e in D)if(Object.prototype.hasOwnProperty.call(D,e)){let r=`${n}${o}${e}`;S&&!m?t[e]=this.translate(r,{...i,defaultValue:le(E)?E[e]:void 0,joinArrays:!1,ns:c}):t[e]=this.translate(r,{...i,joinArrays:!1,ns:c}),t[e]===r&&(t[e]=D[e])}m=t}}else if(y&&x(v)&&Array.isArray(m))m=m.join(v),m&&=this.extendTranslation(m,t,i,r);else{let e=!1,n=!1;!this.isValidLookup(m)&&S&&(e=!0,m=E),this.isValidLookup(m)||(n=!0,m=s);let a=(i.missingKeyNoValueFallbackToKey||this.options.missingKeyNoValueFallbackToKey)&&n?void 0:m,c=S&&E!==m&&this.options.updateMissing;if(n||e||c){if(this.logger.log(c?`updateKey`:`missingKey`,d,l,s,c?E:m),o){let e=this.resolve(s,{...i,keySeparator:!1});e&&e.res&&this.logger.warn(`Seems the loaded translations were in flat JSON format instead of nested. Either set keySeparator: false on init or make sure your translations are published in nested format.`)}let e=[],t=this.languageUtils.getFallbackCodes(this.options.fallbackLng,i.lng||this.language);if(this.options.saveMissingTo===`fallback`&&t&&t[0])for(let n=0;n<t.length;n++)e.push(t[n]);else this.options.saveMissingTo===`all`?e=this.languageUtils.toResolveHierarchy(i.lng||this.language):e.push(i.lng||this.language);let n=(e,t,n)=>{let r=S&&n!==m?n:a;this.options.missingKeyHandler?this.options.missingKeyHandler(e,l,t,r,c,i):this.backendConnector?.saveMissing&&this.backendConnector.saveMissing(e,l,t,r,c,i),this.emit(`missingKey`,e,l,t,m)};this.options.saveMissing&&(this.options.saveMissingPlurals&&b?e.forEach(e=>{let t=this.pluralResolver.getSuffixes(e,i);T&&i[`defaultValue${this.options.pluralSeparator}zero`]&&t.indexOf(`${this.options.pluralSeparator}zero`)<0&&t.push(`${this.options.pluralSeparator}zero`),t.forEach(t=>{n([e],s+t,i[`defaultValue${t}`]||E)})}):n(e,s,E))}m=this.extendTranslation(m,t,i,p,r),n&&m===s&&this.options.appendNamespaceToMissingKey&&(m=`${l}${u}${s}`),(n||e)&&this.options.parseMissingKeyHandler&&(m=this.options.parseMissingKeyHandler(this.options.appendNamespaceToMissingKey?`${l}${u}${s}`:s,e?m:void 0,i))}return a?(p.res=m,p.usedParams=this.getUsedParamsDetails(i),p):m}extendTranslation(e,t,n,r,i){if(this.i18nFormat?.parse)e=this.i18nFormat.parse(e,{...this.options.interpolation.defaultVariables,...n},n.lng||this.language||r.usedLng,r.usedNS,r.usedKey,{resolved:r});else if(!n.skipInterpolation){n.interpolation&&this.interpolator.init({...n,interpolation:{...this.options.interpolation,...n.interpolation}});let a=x(e)&&(n?.interpolation?.skipOnVariables===void 0?this.options.interpolation.skipOnVariables:n.interpolation.skipOnVariables),o;if(a){let t=e.match(this.interpolator.nestingRegexp);o=t&&t.length}let s=n.replace&&!x(n.replace)?n.replace:n;if(this.options.interpolation.defaultVariables&&(s={...this.options.interpolation.defaultVariables,...s}),e=this.interpolator.interpolate(e,s,n.lng||this.language||r.usedLng,n),a){let t=e.match(this.interpolator.nestingRegexp),r=t&&t.length;o<r&&(n.nest=!1)}!n.lng&&r&&r.res&&(n.lng=this.language||r.usedLng),n.nest!==!1&&(e=this.interpolator.nest(e,(...e)=>i?.[0]===e[0]&&!n.context?(this.logger.warn(`It seems you are nesting recursively key: ${e[0]} in key: ${t[0]}`),null):this.translate(...e,t),n)),n.interpolation&&this.interpolator.reset()}let a=n.postProcess||this.options.postProcess,o=x(a)?[a]:a;return e!=null&&o?.length&&n.applyPostProcessor!==!1&&(e=ae.handle(o,e,t,this.options&&this.options.postProcessPassResolved?{i18nResolved:{...r,usedParams:this.getUsedParamsDetails(n)},...n}:n,this)),e}resolve(e,t={}){let n,r,i,a,o;return x(e)&&(e=[e]),e.forEach(e=>{if(this.isValidLookup(n))return;let s=this.extractFromKey(e,t),c=s.key;r=c;let l=s.namespaces;this.options.fallbackNS&&(l=l.concat(this.options.fallbackNS));let u=t.count!==void 0&&!x(t.count),d=u&&!t.ordinal&&t.count===0,f=t.context!==void 0&&(x(t.context)||typeof t.context==`number`)&&t.context!==``,p=t.lngs?t.lngs:this.languageUtils.toResolveHierarchy(t.lng||this.language,t.fallbackLng);l.forEach(e=>{this.isValidLookup(n)||(o=e,!ce[`${p[0]}-${e}`]&&this.utils?.hasLoadedNamespace&&!this.utils?.hasLoadedNamespace(o)&&(ce[`${p[0]}-${e}`]=!0,this.logger.warn(`key "${r}" for languages "${p.join(`, `)}" won't get resolved as namespace "${o}" was not yet loaded`,`This means something IS WRONG in your setup. You access the t function before i18next.init / i18next.loadNamespace / i18next.changeLanguage was done. Wait for the callback or Promise to resolve before accessing it!!!`)),p.forEach(r=>{if(this.isValidLookup(n))return;a=r;let o=[c];if(this.i18nFormat?.addLookupKeys)this.i18nFormat.addLookupKeys(o,c,r,e,t);else{let e;u&&(e=this.pluralResolver.getSuffix(r,t.count,t));let n=`${this.options.pluralSeparator}zero`,i=`${this.options.pluralSeparator}ordinal${this.options.pluralSeparator}`;if(u&&(t.ordinal&&e.indexOf(i)===0&&o.push(c+e.replace(i,this.options.pluralSeparator)),o.push(c+e),d&&o.push(c+n)),f){let r=`${c}${this.options.contextSeparator||`_`}${t.context}`;o.push(r),u&&(t.ordinal&&e.indexOf(i)===0&&o.push(r+e.replace(i,this.options.pluralSeparator)),o.push(r+e),d&&o.push(r+n))}}let s;for(;s=o.pop();)this.isValidLookup(n)||(i=s,n=this.getResource(r,e,s,t))}))})}),{res:n,usedKey:r,exactUsedKey:i,usedLng:a,usedNS:o}}isValidLookup(e){return e!==void 0&&!(!this.options.returnNull&&e===null)&&!(!this.options.returnEmptyString&&e===``)}getResource(e,t,n,r={}){return this.i18nFormat?.getResource?this.i18nFormat.getResource(e,t,n,r):this.resourceStore.getResource(e,t,n,r)}getUsedParamsDetails(e={}){let t=[`defaultValue`,`ordinal`,`context`,`replace`,`lng`,`lngs`,`fallbackLng`,`ns`,`keySeparator`,`nsSeparator`,`returnObjects`,`returnDetails`,`joinArrays`,`postProcess`,`interpolation`],n=e.replace&&!x(e.replace),r=n?e.replace:e;if(n&&e.count!==void 0&&(r.count=e.count),this.options.interpolation.defaultVariables&&(r={...this.options.interpolation.defaultVariables,...r}),!n){r={...r};for(let e of t)delete r[e]}return r}static hasDefaultValue(e){for(let t in e)if(Object.prototype.hasOwnProperty.call(e,t)&&t.substring(0,12)===`defaultValue`&&e[t]!==void 0)return!0;return!1}},de=class{constructor(e){this.options=e,this.supportedLngs=this.options.supportedLngs||!1,this.logger=ne.create(`languageUtils`)}getScriptPartFromCode(e){if(e=ee(e),!e||e.indexOf(`-`)<0)return null;let t=e.split(`-`);return t.length===2||(t.pop(),t[t.length-1].toLowerCase()===`x`)?null:this.formatLanguageCode(t.join(`-`))}getLanguagePartFromCode(e){if(e=ee(e),!e||e.indexOf(`-`)<0)return e;let t=e.split(`-`);return this.formatLanguageCode(t[0])}formatLanguageCode(e){if(x(e)&&e.indexOf(`-`)>-1){let t;try{t=Intl.getCanonicalLocales(e)[0]}catch{}return t&&this.options.lowerCaseLng&&(t=t.toLowerCase()),t||(this.options.lowerCaseLng?e.toLowerCase():e)}return this.options.cleanCode||this.options.lowerCaseLng?e.toLowerCase():e}isSupportedCode(e){return(this.options.load===`languageOnly`||this.options.nonExplicitSupportedLngs)&&(e=this.getLanguagePartFromCode(e)),!this.supportedLngs||!this.supportedLngs.length||this.supportedLngs.indexOf(e)>-1}getBestMatchFromCodes(e){if(!e)return null;let t;return e.forEach(e=>{if(t)return;let n=this.formatLanguageCode(e);(!this.options.supportedLngs||this.isSupportedCode(n))&&(t=n)}),!t&&this.options.supportedLngs&&e.forEach(e=>{if(t)return;let n=this.getScriptPartFromCode(e);if(this.isSupportedCode(n))return t=n;let r=this.getLanguagePartFromCode(e);if(this.isSupportedCode(r))return t=r;t=this.options.supportedLngs.find(e=>{if(e===r||!(e.indexOf(`-`)<0&&r.indexOf(`-`)<0)&&(e.indexOf(`-`)>0&&r.indexOf(`-`)<0&&e.substring(0,e.indexOf(`-`))===r||e.indexOf(r)===0&&r.length>1))return e})}),t||=this.getFallbackCodes(this.options.fallbackLng)[0],t}getFallbackCodes(e,t){if(!e)return[];if(typeof e==`function`&&(e=e(t)),x(e)&&(e=[e]),Array.isArray(e))return e;if(!t)return e.default||[];let n=e[t];return n||=e[this.getScriptPartFromCode(t)],n||=e[this.formatLanguageCode(t)],n||=e[this.getLanguagePartFromCode(t)],n||=e.default,n||[]}toResolveHierarchy(e,t){let n=this.getFallbackCodes((t===!1?[]:t)||this.options.fallbackLng||[],e),r=[],i=e=>{e&&(this.isSupportedCode(e)?r.push(e):this.logger.warn(`rejecting language code not found in supportedLngs: ${e}`))};return x(e)&&(e.indexOf(`-`)>-1||e.indexOf(`_`)>-1)?(this.options.load!==`languageOnly`&&i(this.formatLanguageCode(e)),this.options.load!==`languageOnly`&&this.options.load!==`currentOnly`&&i(this.getScriptPartFromCode(e)),this.options.load!==`currentOnly`&&i(this.getLanguagePartFromCode(e))):x(e)&&i(this.formatLanguageCode(e)),n.forEach(e=>{r.indexOf(e)<0&&i(this.formatLanguageCode(e))}),r}},fe={zero:0,one:1,two:2,few:3,many:4,other:5},pe={select:e=>e===1?`one`:`other`,resolvedOptions:()=>({pluralCategories:[`one`,`other`]})},me=class{constructor(e,t={}){this.languageUtils=e,this.options=t,this.logger=ne.create(`pluralResolver`),this.pluralRulesCache={}}addRule(e,t){this.rules[e]=t}clearCache(){this.pluralRulesCache={}}getRule(e,t={}){let n=ee(e===`dev`?`en`:e),r=t.ordinal?`ordinal`:`cardinal`,i=JSON.stringify({cleanedCode:n,type:r});if(i in this.pluralRulesCache)return this.pluralRulesCache[i];let a;try{a=new Intl.PluralRules(n,{type:r})}catch{if(!Intl)return this.logger.error(`No Intl support, please use an Intl polyfill!`),pe;if(!e.match(/-|_/))return pe;let n=this.languageUtils.getLanguagePartFromCode(e);a=this.getRule(n,t)}return this.pluralRulesCache[i]=a,a}needsPlural(e,t={}){let n=this.getRule(e,t);return n||=this.getRule(`dev`,t),n?.resolvedOptions().pluralCategories.length>1}getPluralFormsOfKey(e,t,n={}){return this.getSuffixes(e,n).map(e=>`${t}${e}`)}getSuffixes(e,t={}){let n=this.getRule(e,t);return n||=this.getRule(`dev`,t),n?n.resolvedOptions().pluralCategories.sort((e,t)=>fe[e]-fe[t]).map(e=>`${this.options.prepend}${t.ordinal?`ordinal${this.options.prepend}`:``}${e}`):[]}getSuffix(e,t,n={}){let r=this.getRule(e,n);return r?`${this.options.prepend}${n.ordinal?`ordinal${this.options.prepend}`:``}${r.select(t)}`:(this.logger.warn(`no plural rule found for: ${e}`),this.getSuffix(`dev`,t,n))}},he=(e,t,n,r=`.`,i=!0)=>{let a=M(e,t,n);return!a&&i&&x(n)&&(a=V(e,n,r),a===void 0&&(a=V(t,n,r))),a},ge=e=>e.replace(/\$/g,`$$$$`),_e=class{constructor(e={}){this.logger=ne.create(`interpolator`),this.options=e,this.format=e?.interpolation?.format||(e=>e),this.init(e)}init(e={}){e.interpolation||={escapeValue:!0};let{escape:t,escapeValue:n,useRawValueToEscape:r,prefix:i,prefixEscaped:a,suffix:o,suffixEscaped:s,formatSeparator:c,unescapeSuffix:l,unescapePrefix:u,nestingPrefix:d,nestingPrefixEscaped:f,nestingSuffix:p,nestingSuffixEscaped:m,nestingOptionsSeparator:h,maxReplaces:g,alwaysFormat:_}=e.interpolation;this.escape=t===void 0?I:t,this.escapeValue=n===void 0?!0:n,this.useRawValueToEscape=r===void 0?!1:r,this.prefix=i?P(i):a||`{{`,this.suffix=o?P(o):s||`}}`,this.formatSeparator=c||`,`,this.unescapePrefix=l?``:u||`-`,this.unescapeSuffix=this.unescapePrefix?``:l||``,this.nestingPrefix=d?P(d):f||P(`$t(`),this.nestingSuffix=p?P(p):m||P(`)`),this.nestingOptionsSeparator=h||`,`,this.maxReplaces=g||1e3,this.alwaysFormat=_===void 0?!1:_,this.resetRegExp()}reset(){this.options&&this.init(this.options)}resetRegExp(){let e=(e,t)=>e?.source===t?(e.lastIndex=0,e):new RegExp(t,`g`);this.regexp=e(this.regexp,`${this.prefix}(.+?)${this.suffix}`),this.regexpUnescape=e(this.regexpUnescape,`${this.prefix}${this.unescapePrefix}(.+?)${this.unescapeSuffix}${this.suffix}`),this.nestingRegexp=e(this.nestingRegexp,`${this.nestingPrefix}((?:[^()"']+|"[^"]*"|'[^']*'|\\((?:[^()]|"[^"]*"|'[^']*')*\\))*?)${this.nestingSuffix}`)}interpolate(e,t,n,r){let i,a,o,s=this.options&&this.options.interpolation&&this.options.interpolation.defaultVariables||{},c=e=>{if(e.indexOf(this.formatSeparator)<0){let i=he(t,s,e,this.options.keySeparator,this.options.ignoreJSONStructure);return this.alwaysFormat?this.format(i,void 0,n,{...r,...t,interpolationkey:e}):i}let i=e.split(this.formatSeparator),a=i.shift().trim(),o=i.join(this.formatSeparator).trim();return this.format(he(t,s,a,this.options.keySeparator,this.options.ignoreJSONStructure),o,n,{...r,...t,interpolationkey:a})};this.resetRegExp();let l=r?.missingInterpolationHandler||this.options.missingInterpolationHandler,u=r?.interpolation?.skipOnVariables===void 0?this.options.interpolation.skipOnVariables:r.interpolation.skipOnVariables;return[{regex:this.regexpUnescape,safeValue:e=>ge(e)},{regex:this.regexp,safeValue:e=>this.escapeValue?ge(this.escape(e)):ge(e)}].forEach(t=>{for(o=0;i=t.regex.exec(e);){let n=i[1].trim();if(a=c(n),a===void 0)if(typeof l==`function`){let t=l(e,i,r);a=x(t)?t:``}else if(r&&Object.prototype.hasOwnProperty.call(r,n))a=``;else if(u){a=i[0];continue}else this.logger.warn(`missed to pass in variable ${n} for interpolating ${e}`),a=``;else !x(a)&&!this.useRawValueToEscape&&(a=C(a));let s=t.safeValue(a);if(e=e.replace(i[0],s),u?(t.regex.lastIndex+=a.length,t.regex.lastIndex-=i[0].length):t.regex.lastIndex=0,o++,o>=this.maxReplaces)break}}),e}nest(e,t,n={}){let r,i,a,o=(e,t)=>{let n=this.nestingOptionsSeparator;if(e.indexOf(n)<0)return e;let r=e.split(RegExp(`${n}[ ]*{`)),i=`{${r[1]}`;e=r[0],i=this.interpolate(i,a);let o=i.match(/'/g),s=i.match(/"/g);((o?.length??0)%2==0&&!s||s.length%2!=0)&&(i=i.replace(/'/g,`"`));try{a=JSON.parse(i),t&&(a={...t,...a})}catch(t){return this.logger.warn(`failed parsing options string in nesting for key ${e}`,t),`${e}${n}${i}`}return a.defaultValue&&a.defaultValue.indexOf(this.prefix)>-1&&delete a.defaultValue,e};for(;r=this.nestingRegexp.exec(e);){let s=[];a={...n},a=a.replace&&!x(a.replace)?a.replace:a,a.applyPostProcessor=!1,delete a.defaultValue;let c=/{.*}/.test(r[1])?r[1].lastIndexOf(`}`)+1:r[1].indexOf(this.formatSeparator);if(c!==-1&&(s=r[1].slice(c).split(this.formatSeparator).map(e=>e.trim()).filter(Boolean),r[1]=r[1].slice(0,c)),i=t(o.call(this,r[1].trim(),a),a),i&&r[0]===e&&!x(i))return i;x(i)||(i=C(i)),i||=(this.logger.warn(`missed to resolve ${r[1]} for nesting ${e}`),``),s.length&&(i=s.reduce((e,t)=>this.format(e,t,n.lng,{...n,interpolationkey:r[1].trim()}),i.trim())),e=e.replace(r[0],i),this.regexp.lastIndex=0}return e}},ve=e=>{let t=e.toLowerCase().trim(),n={};if(e.indexOf(`(`)>-1){let r=e.split(`(`);t=r[0].toLowerCase().trim();let i=r[1].substring(0,r[1].length-1);t===`currency`&&i.indexOf(`:`)<0?n.currency||=i.trim():t===`relativetime`&&i.indexOf(`:`)<0?n.range||=i.trim():i.split(`;`).forEach(e=>{if(e){let[t,...r]=e.split(`:`),i=r.join(`:`).trim().replace(/^'+|'+$/g,``),a=t.trim();n[a]||(n[a]=i),i===`false`&&(n[a]=!1),i===`true`&&(n[a]=!0),isNaN(i)||(n[a]=parseInt(i,10))}})}return{formatName:t,formatOptions:n}},ye=e=>{let t={};return(n,r,i)=>{let a=i;i&&i.interpolationkey&&i.formatParams&&i.formatParams[i.interpolationkey]&&i[i.interpolationkey]&&(a={...a,[i.interpolationkey]:void 0});let o=r+JSON.stringify(a),s=t[o];return s||(s=e(ee(r),i),t[o]=s),s(n)}},be=e=>(t,n,r)=>e(ee(n),r)(t),xe=class{constructor(e={}){this.logger=ne.create(`formatter`),this.options=e,this.init(e)}init(e,t={interpolation:{}}){this.formatSeparator=t.interpolation.formatSeparator||`,`;let n=t.cacheInBuiltFormats?ye:be;this.formats={number:n((e,t)=>{let n=new Intl.NumberFormat(e,{...t});return e=>n.format(e)}),currency:n((e,t)=>{let n=new Intl.NumberFormat(e,{...t,style:`currency`});return e=>n.format(e)}),datetime:n((e,t)=>{let n=new Intl.DateTimeFormat(e,{...t});return e=>n.format(e)}),relativetime:n((e,t)=>{let n=new Intl.RelativeTimeFormat(e,{...t});return e=>n.format(e,t.range||`day`)}),list:n((e,t)=>{let n=new Intl.ListFormat(e,{...t});return e=>n.format(e)})}}add(e,t){this.formats[e.toLowerCase().trim()]=t}addCached(e,t){this.formats[e.toLowerCase().trim()]=ye(t)}format(e,t,n,r={}){let i=t.split(this.formatSeparator);if(i.length>1&&i[0].indexOf(`(`)>1&&i[0].indexOf(`)`)<0&&i.find(e=>e.indexOf(`)`)>-1)){let e=i.findIndex(e=>e.indexOf(`)`)>-1);i[0]=[i[0],...i.splice(1,e)].join(this.formatSeparator)}return i.reduce((e,t)=>{let{formatName:i,formatOptions:a}=ve(t);if(this.formats[i]){let t=e;try{let o=r?.formatParams?.[r.interpolationkey]||{},s=o.locale||o.lng||r.locale||r.lng||n;t=this.formats[i](e,s,{...a,...r,...o})}catch(e){this.logger.warn(e)}return t}else this.logger.warn(`there was no format function for ${i}`);return e},e)}},Se=(e,t)=>{e.pending[t]!==void 0&&(delete e.pending[t],e.pendingCount--)},Ce=class extends re{constructor(e,t,n,r={}){super(),this.backend=e,this.store=t,this.services=n,this.languageUtils=n.languageUtils,this.options=r,this.logger=ne.create(`backendConnector`),this.waitingReads=[],this.maxParallelReads=r.maxParallelReads||10,this.readingCalls=0,this.maxRetries=r.maxRetries>=0?r.maxRetries:5,this.retryTimeout=r.retryTimeout>=1?r.retryTimeout:350,this.state={},this.queue=[],this.backend?.init?.(n,r.backend,r)}queueLoad(e,t,n,r){let i={},a={},o={},s={};return e.forEach(e=>{let r=!0;t.forEach(t=>{let o=`${e}|${t}`;!n.reload&&this.store.hasResourceBundle(e,t)?this.state[o]=2:this.state[o]<0||(this.state[o]===1?a[o]===void 0&&(a[o]=!0):(this.state[o]=1,r=!1,a[o]===void 0&&(a[o]=!0),i[o]===void 0&&(i[o]=!0),s[t]===void 0&&(s[t]=!0)))}),r||(o[e]=!0)}),(Object.keys(i).length||Object.keys(a).length)&&this.queue.push({pending:a,pendingCount:Object.keys(a).length,loaded:{},errors:[],callback:r}),{toLoad:Object.keys(i),pending:Object.keys(a),toLoadLanguages:Object.keys(o),toLoadNamespaces:Object.keys(s)}}loaded(e,t,n){let r=e.split(`|`),i=r[0],a=r[1];t&&this.emit(`failedLoading`,i,a,t),!t&&n&&this.store.addResourceBundle(i,a,n,void 0,void 0,{skipCopy:!0}),this.state[e]=t?-1:2,t&&n&&(this.state[e]=0);let o={};this.queue.forEach(n=>{A(n.loaded,[i],a),Se(n,e),t&&n.errors.push(t),n.pendingCount===0&&!n.done&&(Object.keys(n.loaded).forEach(e=>{o[e]||(o[e]={});let t=n.loaded[e];t.length&&t.forEach(t=>{o[e][t]===void 0&&(o[e][t]=!0)})}),n.done=!0,n.errors.length?n.callback(n.errors):n.callback())}),this.emit(`loaded`,o),this.queue=this.queue.filter(e=>!e.done)}read(e,t,n,r=0,i=this.retryTimeout,a){if(!e.length)return a(null,{});if(this.readingCalls>=this.maxParallelReads){this.waitingReads.push({lng:e,ns:t,fcName:n,tried:r,wait:i,callback:a});return}this.readingCalls++;let o=(o,s)=>{if(this.readingCalls--,this.waitingReads.length>0){let e=this.waitingReads.shift();this.read(e.lng,e.ns,e.fcName,e.tried,e.wait,e.callback)}if(o&&s&&r<this.maxRetries){setTimeout(()=>{this.read.call(this,e,t,n,r+1,i*2,a)},i);return}a(o,s)},s=this.backend[n].bind(this.backend);if(s.length===2){try{let n=s(e,t);n&&typeof n.then==`function`?n.then(e=>o(null,e)).catch(o):o(null,n)}catch(e){o(e)}return}return s(e,t,o)}prepareLoading(e,t,n={},r){if(!this.backend)return this.logger.warn(`No backend was added via i18next.use. Will not load resources.`),r&&r();x(e)&&(e=this.languageUtils.toResolveHierarchy(e)),x(t)&&(t=[t]);let i=this.queueLoad(e,t,n,r);if(!i.toLoad.length)return i.pending.length||r(),null;i.toLoad.forEach(e=>{this.loadOne(e)})}load(e,t,n){this.prepareLoading(e,t,{},n)}reload(e,t,n){this.prepareLoading(e,t,{reload:!0},n)}loadOne(e,t=``){let n=e.split(`|`),r=n[0],i=n[1];this.read(r,i,`read`,void 0,void 0,(n,a)=>{n&&this.logger.warn(`${t}loading namespace ${i} for language ${r} failed`,n),!n&&a&&this.logger.log(`${t}loaded namespace ${i} for language ${r}`,a),this.loaded(e,n,a)})}saveMissing(e,t,n,r,i,a={},o=()=>{}){if(this.services?.utils?.hasLoadedNamespace&&!this.services?.utils?.hasLoadedNamespace(t)){this.logger.warn(`did not save key "${n}" as the namespace "${t}" was not yet loaded`,`This means something IS WRONG in your setup. You access the t function before i18next.init / i18next.loadNamespace / i18next.changeLanguage was done. Wait for the callback or Promise to resolve before accessing it!!!`);return}if(!(n==null||n===``)){if(this.backend?.create){let s={...a,isUpdate:i},c=this.backend.create.bind(this.backend);if(c.length<6)try{let i;i=c.length===5?c(e,t,n,r,s):c(e,t,n,r),i&&typeof i.then==`function`?i.then(e=>o(null,e)).catch(o):o(null,i)}catch(e){o(e)}else c(e,t,n,r,o,s)}!e||!e[0]||this.store.addResource(e[0],t,n,r)}}},we=()=>({debug:!1,initAsync:!0,ns:[`translation`],defaultNS:[`translation`],fallbackLng:[`dev`],fallbackNS:!1,supportedLngs:!1,nonExplicitSupportedLngs:!1,load:`all`,preload:!1,simplifyPluralSuffix:!0,keySeparator:`.`,nsSeparator:`:`,pluralSeparator:`_`,contextSeparator:`_`,partialBundledLanguages:!1,saveMissing:!1,updateMissing:!1,saveMissingTo:`fallback`,saveMissingPlurals:!0,missingKeyHandler:!1,missingInterpolationHandler:!1,postProcess:!1,postProcessPassResolved:!1,returnNull:!1,returnEmptyString:!0,returnObjects:!1,joinArrays:!1,returnedObjectHandler:!1,parseMissingKeyHandler:!1,appendNamespaceToMissingKey:!1,appendNamespaceToCIMode:!1,overloadTranslationOptionHandler:e=>{let t={};if(typeof e[1]==`object`&&(t=e[1]),x(e[1])&&(t.defaultValue=e[1]),x(e[2])&&(t.tDescription=e[2]),typeof e[2]==`object`||typeof e[3]==`object`){let n=e[3]||e[2];Object.keys(n).forEach(e=>{t[e]=n[e]})}return t},interpolation:{escapeValue:!0,format:e=>e,prefix:`{{`,suffix:`}}`,formatSeparator:`,`,unescapePrefix:`-`,nestingPrefix:`$t(`,nestingSuffix:`)`,nestingOptionsSeparator:`,`,maxReplaces:1e3,skipOnVariables:!0},cacheInBuiltFormats:!0}),Te=e=>(x(e.ns)&&(e.ns=[e.ns]),x(e.fallbackLng)&&(e.fallbackLng=[e.fallbackLng]),x(e.fallbackNS)&&(e.fallbackNS=[e.fallbackNS]),e.supportedLngs?.indexOf?.(`cimode`)<0&&(e.supportedLngs=e.supportedLngs.concat([`cimode`])),typeof e.initImmediate==`boolean`&&(e.initAsync=e.initImmediate),e),Ee=()=>{},De=e=>{Object.getOwnPropertyNames(Object.getPrototypeOf(e)).forEach(t=>{typeof e[t]==`function`&&(e[t]=e[t].bind(e))})},Oe=class e extends re{constructor(e={},t){if(super(),this.options=Te(e),this.services={},this.logger=ne,this.modules={external:[]},De(this),t&&!this.isInitialized&&!e.isClone){if(!this.options.initAsync)return this.init(e,t),this;setTimeout(()=>{this.init(e,t)},0)}}init(e={},t){this.isInitializing=!0,typeof e==`function`&&(t=e,e={}),e.defaultNS==null&&e.ns&&(x(e.ns)?e.defaultNS=e.ns:e.ns.indexOf(`translation`)<0&&(e.defaultNS=e.ns[0]));let n=we();this.options={...n,...this.options,...Te(e)},this.options.interpolation={...n.interpolation,...this.options.interpolation},e.keySeparator!==void 0&&(this.options.userDefinedKeySeparator=e.keySeparator),e.nsSeparator!==void 0&&(this.options.userDefinedNsSeparator=e.nsSeparator);let r=e=>e?typeof e==`function`?new e:e:null;if(!this.options.isClone){this.modules.logger?ne.init(r(this.modules.logger),this.options):ne.init(null,this.options);let e;e=this.modules.formatter?this.modules.formatter:xe;let t=new de(this.options);this.store=new ie(this.options.resources,this.options);let i=this.services;i.logger=ne,i.resourceStore=this.store,i.languageUtils=t,i.pluralResolver=new me(t,{prepend:this.options.pluralSeparator,simplifyPluralSuffix:this.options.simplifyPluralSuffix}),this.options.interpolation.format&&this.options.interpolation.format!==n.interpolation.format&&this.logger.deprecate(`init: you are still using the legacy format function, please use the new approach: https://www.i18next.com/translation-function/formatting`),e&&(!this.options.interpolation.format||this.options.interpolation.format===n.interpolation.format)&&(i.formatter=r(e),i.formatter.init&&i.formatter.init(i,this.options),this.options.interpolation.format=i.formatter.format.bind(i.formatter)),i.interpolator=new _e(this.options),i.utils={hasLoadedNamespace:this.hasLoadedNamespace.bind(this)},i.backendConnector=new Ce(r(this.modules.backend),i.resourceStore,i,this.options),i.backendConnector.on(`*`,(e,...t)=>{this.emit(e,...t)}),this.modules.languageDetector&&(i.languageDetector=r(this.modules.languageDetector),i.languageDetector.init&&i.languageDetector.init(i,this.options.detection,this.options)),this.modules.i18nFormat&&(i.i18nFormat=r(this.modules.i18nFormat),i.i18nFormat.init&&i.i18nFormat.init(this)),this.translator=new ue(this.services,this.options),this.translator.on(`*`,(e,...t)=>{this.emit(e,...t)}),this.modules.external.forEach(e=>{e.init&&e.init(this)})}if(this.format=this.options.interpolation.format,t||=Ee,this.options.fallbackLng&&!this.services.languageDetector&&!this.options.lng){let e=this.services.languageUtils.getFallbackCodes(this.options.fallbackLng);e.length>0&&e[0]!==`dev`&&(this.options.lng=e[0])}!this.services.languageDetector&&!this.options.lng&&this.logger.warn(`init: no languageDetector is used and no lng is defined`),[`getResource`,`hasResourceBundle`,`getResourceBundle`,`getDataByLanguage`].forEach(e=>{this[e]=(...t)=>this.store[e](...t)}),[`addResource`,`addResources`,`addResourceBundle`,`removeResourceBundle`].forEach(e=>{this[e]=(...t)=>(this.store[e](...t),this)});let i=S(),a=()=>{let e=(e,n)=>{this.isInitializing=!1,this.isInitialized&&!this.initializedStoreOnce&&this.logger.warn(`init: i18next is already initialized. You should call init just once!`),this.isInitialized=!0,this.options.isClone||this.logger.log(`initialized`,this.options),this.emit(`initialized`,this.options),i.resolve(n),t(e,n)};if(this.languages&&!this.isInitialized)return e(null,this.t.bind(this));this.changeLanguage(this.options.lng,e)};return this.options.resources||!this.options.initAsync?a():setTimeout(a,0),i}loadResources(e,t=Ee){let n=t,r=x(e)?e:this.language;if(typeof e==`function`&&(n=e),!this.options.resources||this.options.partialBundledLanguages){if(r?.toLowerCase()===`cimode`&&(!this.options.preload||this.options.preload.length===0))return n();let e=[],t=t=>{t&&t!==`cimode`&&this.services.languageUtils.toResolveHierarchy(t).forEach(t=>{t!==`cimode`&&e.indexOf(t)<0&&e.push(t)})};r?t(r):this.services.languageUtils.getFallbackCodes(this.options.fallbackLng).forEach(e=>t(e)),this.options.preload?.forEach?.(e=>t(e)),this.services.backendConnector.load(e,this.options.ns,e=>{!e&&!this.resolvedLanguage&&this.language&&this.setResolvedLanguage(this.language),n(e)})}else n(null)}reloadResources(e,t,n){let r=S();return typeof e==`function`&&(n=e,e=void 0),typeof t==`function`&&(n=t,t=void 0),e||=this.languages,t||=this.options.ns,n||=Ee,this.services.backendConnector.reload(e,t,e=>{r.resolve(),n(e)}),r}use(e){if(!e)throw Error(`You are passing an undefined module! Please check the object you are passing to i18next.use()`);if(!e.type)throw Error(`You are passing a wrong module! Please check the object you are passing to i18next.use()`);return e.type===`backend`&&(this.modules.backend=e),(e.type===`logger`||e.log&&e.warn&&e.error)&&(this.modules.logger=e),e.type===`languageDetector`&&(this.modules.languageDetector=e),e.type===`i18nFormat`&&(this.modules.i18nFormat=e),e.type===`postProcessor`&&ae.addPostProcessor(e),e.type===`formatter`&&(this.modules.formatter=e),e.type===`3rdParty`&&this.modules.external.push(e),this}setResolvedLanguage(e){if(!(!e||!this.languages)&&!([`cimode`,`dev`].indexOf(e)>-1)){for(let e=0;e<this.languages.length;e++){let t=this.languages[e];if(!([`cimode`,`dev`].indexOf(t)>-1)&&this.store.hasLanguageSomeTranslations(t)){this.resolvedLanguage=t;break}}!this.resolvedLanguage&&this.languages.indexOf(e)<0&&this.store.hasLanguageSomeTranslations(e)&&(this.resolvedLanguage=e,this.languages.unshift(e))}}changeLanguage(e,t){this.isLanguageChangingTo=e;let n=S();this.emit(`languageChanging`,e);let r=e=>{this.language=e,this.languages=this.services.languageUtils.toResolveHierarchy(e),this.resolvedLanguage=void 0,this.setResolvedLanguage(e)},i=(i,a)=>{a?this.isLanguageChangingTo===e&&(r(a),this.translator.changeLanguage(a),this.isLanguageChangingTo=void 0,this.emit(`languageChanged`,a),this.logger.log(`languageChanged`,a)):this.isLanguageChangingTo=void 0,n.resolve((...e)=>this.t(...e)),t&&t(i,(...e)=>this.t(...e))},a=t=>{!e&&!t&&this.services.languageDetector&&(t=[]);let n=x(t)?t:t&&t[0],a=this.store.hasLanguageSomeTranslations(n)?n:this.services.languageUtils.getBestMatchFromCodes(x(t)?[t]:t);a&&(this.language||r(a),this.translator.language||this.translator.changeLanguage(a),this.services.languageDetector?.cacheUserLanguage?.(a)),this.loadResources(a,e=>{i(e,a)})};return!e&&this.services.languageDetector&&!this.services.languageDetector.async?a(this.services.languageDetector.detect()):!e&&this.services.languageDetector&&this.services.languageDetector.async?this.services.languageDetector.detect.length===0?this.services.languageDetector.detect().then(a):this.services.languageDetector.detect(a):a(e),n}getFixedT(e,t,n){let r=(e,t,...i)=>{let a;a=typeof t==`object`?{...t}:this.options.overloadTranslationOptionHandler([e,t].concat(i)),a.lng=a.lng||r.lng,a.lngs=a.lngs||r.lngs,a.ns=a.ns||r.ns,a.keyPrefix!==``&&(a.keyPrefix=a.keyPrefix||n||r.keyPrefix);let o=this.options.keySeparator||`.`,s;return a.keyPrefix&&Array.isArray(e)?s=e.map(e=>(typeof e==`function`&&(e=H(e,{...this.options,...t})),`${a.keyPrefix}${o}${e}`)):(typeof e==`function`&&(e=H(e,{...this.options,...t})),s=a.keyPrefix?`${a.keyPrefix}${o}${e}`:e),this.t(s,a)};return x(e)?r.lng=e:r.lngs=e,r.ns=t,r.keyPrefix=n,r}t(...e){return this.translator?.translate(...e)}exists(...e){return this.translator?.exists(...e)}setDefaultNamespace(e){this.options.defaultNS=e}hasLoadedNamespace(e,t={}){if(!this.isInitialized)return this.logger.warn(`hasLoadedNamespace: i18next was not initialized`,this.languages),!1;if(!this.languages||!this.languages.length)return this.logger.warn(`hasLoadedNamespace: i18n.languages were undefined or empty`,this.languages),!1;let n=t.lng||this.resolvedLanguage||this.languages[0],r=this.options?this.options.fallbackLng:!1,i=this.languages[this.languages.length-1];if(n.toLowerCase()===`cimode`)return!0;let a=(e,t)=>{let n=this.services.backendConnector.state[`${e}|${t}`];return n===-1||n===0||n===2};if(t.precheck){let e=t.precheck(this,a);if(e!==void 0)return e}return!!(this.hasResourceBundle(n,e)||!this.services.backendConnector.backend||this.options.resources&&!this.options.partialBundledLanguages||a(n,e)&&(!r||a(i,e)))}loadNamespaces(e,t){let n=S();return this.options.ns?(x(e)&&(e=[e]),e.forEach(e=>{this.options.ns.indexOf(e)<0&&this.options.ns.push(e)}),this.loadResources(e=>{n.resolve(),t&&t(e)}),n):(t&&t(),Promise.resolve())}loadLanguages(e,t){let n=S();x(e)&&(e=[e]);let r=this.options.preload||[],i=e.filter(e=>r.indexOf(e)<0&&this.services.languageUtils.isSupportedCode(e));return i.length?(this.options.preload=r.concat(i),this.loadResources(e=>{n.resolve(),t&&t(e)}),n):(t&&t(),Promise.resolve())}dir(e){if(e||=this.resolvedLanguage||(this.languages?.length>0?this.languages[0]:this.language),!e)return`rtl`;try{let t=new Intl.Locale(e);if(t&&t.getTextInfo){let e=t.getTextInfo();if(e&&e.direction)return e.direction}}catch{}let t=`ar.shu.sqr.ssh.xaa.yhd.yud.aao.abh.abv.acm.acq.acw.acx.acy.adf.ads.aeb.aec.afb.ajp.apc.apd.arb.arq.ars.ary.arz.auz.avl.ayh.ayl.ayn.ayp.bbz.pga.he.iw.ps.pbt.pbu.pst.prp.prd.ug.ur.ydd.yds.yih.ji.yi.hbo.men.xmn.fa.jpr.peo.pes.prs.dv.sam.ckb`.split(`.`),n=this.services?.languageUtils||new de(we());return e.toLowerCase().indexOf(`-latn`)>1?`ltr`:t.indexOf(n.getLanguagePartFromCode(e))>-1||e.toLowerCase().indexOf(`-arab`)>1?`rtl`:`ltr`}static createInstance(t={},n){let r=new e(t,n);return r.createInstance=e.createInstance,r}cloneInstance(t={},n=Ee){let r=t.forkResourceStore;r&&delete t.forkResourceStore;let i={...this.options,...t,isClone:!0},a=new e(i);return(t.debug!==void 0||t.prefix!==void 0)&&(a.logger=a.logger.clone(t)),[`store`,`services`,`language`].forEach(e=>{a[e]=this[e]}),a.services={...this.services},a.services.utils={hasLoadedNamespace:a.hasLoadedNamespace.bind(a)},r&&(a.store=new ie(Object.keys(this.store.data).reduce((e,t)=>(e[t]={...this.store.data[t]},e[t]=Object.keys(e[t]).reduce((n,r)=>(n[r]={...e[t][r]},n),e[t]),e),{}),i),a.services.resourceStore=a.store),a.translator=new ue(a.services,i),a.translator.on(`*`,(e,...t)=>{a.emit(e,...t)}),a.init(i,n),a.translator.options=i,a.translator.backendConnector.services.utils={hasLoadedNamespace:a.hasLoadedNamespace.bind(a)},a}toJSON(){return{options:this.options,store:this.store,language:this.language,languages:this.languages,resolvedLanguage:this.resolvedLanguage}}}.createInstance();Oe.createInstance,Oe.dir,Oe.init,Oe.loadResources,Oe.reloadResources,Oe.use,Oe.changeLanguage,Oe.getFixedT,Oe.t,Oe.exists,Oe.setDefaultNamespace,Oe.hasLoadedNamespace,Oe.loadNamespaces,Oe.loadLanguages;var ke=(e,t,n,r)=>{let i=[n,{code:t,...r||{}}];if(e?.services?.logger?.forward)return e.services.logger.forward(i,`warn`,`react-i18next::`,!0);Ie(i[0])&&(i[0]=`react-i18next:: ${i[0]}`),e?.services?.logger?.warn?e.services.logger.warn(...i):console?.warn&&console.warn(...i)},Ae={},je=(e,t,n,r)=>{Ie(n)&&Ae[n]||(Ie(n)&&(Ae[n]=new Date),ke(e,t,n,r))},Me=(e,t)=>()=>{if(e.isInitialized)t();else{let n=()=>{setTimeout(()=>{e.off(`initialized`,n)},0),t()};e.on(`initialized`,n)}},Ne=(e,t,n)=>{e.loadNamespaces(t,Me(e,n))},Pe=(e,t,n,r)=>{if(Ie(n)&&(n=[n]),e.options.preload&&e.options.preload.indexOf(t)>-1)return Ne(e,n,r);n.forEach(t=>{e.options.ns.indexOf(t)<0&&e.options.ns.push(t)}),e.loadLanguages(t,Me(e,r))},Fe=(e,t,n={})=>!t.languages||!t.languages.length?(je(t,`NO_LANGUAGES`,`i18n.languages were undefined or empty`,{languages:t.languages}),!0):t.hasLoadedNamespace(e,{lng:n.lng,precheck:(t,r)=>{if(n.bindI18n&&n.bindI18n.indexOf(`languageChanging`)>-1&&t.services.backendConnector.backend&&t.isLanguageChangingTo&&!r(t.isLanguageChangingTo,e))return!1}}),Ie=e=>typeof e==`string`,Le=e=>typeof e==`object`&&!!e,Re=/&(?:amp|#38|lt|#60|gt|#62|apos|#39|quot|#34|nbsp|#160|copy|#169|reg|#174|hellip|#8230|#x2F|#47);/g,ze={"&amp;":`&`,"&#38;":`&`,"&lt;":`<`,"&#60;":`<`,"&gt;":`>`,"&#62;":`>`,"&apos;":`'`,"&#39;":`'`,"&quot;":`"`,"&#34;":`"`,"&nbsp;":` `,"&#160;":` `,"&copy;":`©`,"&#169;":`©`,"&reg;":`®`,"&#174;":`®`,"&hellip;":`…`,"&#8230;":`…`,"&#x2F;":`/`,"&#47;":`/`},Be=e=>ze[e],Ve={bindI18n:`languageChanged`,bindI18nStore:``,transEmptyNodeValue:``,transSupportBasicHtmlNodes:!0,transWrapTextNodes:``,transKeepBasicHtmlNodesFor:[`br`,`strong`,`i`,`p`],useSuspense:!0,unescape:e=>e.replace(Re,Be),transDefaultProps:void 0},He=(e={})=>{Ve={...Ve,...e}},Ue=()=>Ve,We,Ge=e=>{We=e},Ke=()=>We,qe={type:`3rdParty`,init(e){He(e.options.react),Ge(e)}},Je=(0,y.createContext)(),Ye=class{constructor(){this.usedNamespaces={}}addUsedNamespaces(e){e.forEach(e=>{this.usedNamespaces[e]||(this.usedNamespaces[e]=!0)})}getUsedNamespaces(){return Object.keys(this.usedNamespaces)}},Xe=o((e=>{var t=f();function n(e,t){return e===t&&(e!==0||1/e==1/t)||e!==e&&t!==t}var r=typeof Object.is==`function`?Object.is:n,i=t.useState,a=t.useEffect,o=t.useLayoutEffect,s=t.useDebugValue;function c(e,t){var n=t(),r=i({inst:{value:n,getSnapshot:t}}),c=r[0].inst,u=r[1];return o(function(){c.value=n,c.getSnapshot=t,l(c)&&u({inst:c})},[e,n,t]),a(function(){return l(c)&&u({inst:c}),e(function(){l(c)&&u({inst:c})})},[e]),s(n),n}function l(e){var t=e.getSnapshot;e=e.value;try{var n=t();return!r(e,n)}catch{return!0}}function u(e,t){return t()}var d=typeof window>`u`||window.document===void 0||window.document.createElement===void 0?u:c;e.useSyncExternalStore=t.useSyncExternalStore===void 0?d:t.useSyncExternalStore})),Ze=o(((e,t)=>{t.exports=Xe()})),Qe=Ze(),$e={t:(e,t)=>Ie(t)?t:Le(t)&&Ie(t.defaultValue)?t.defaultValue:Array.isArray(e)?e[e.length-1]:e,ready:!1},et=()=>()=>{},U=(e,t={})=>{let{i18n:n}=t,{i18n:r,defaultNS:i}=(0,y.useContext)(Je)||{},a=n||r||Ke();a&&!a.reportNamespaces&&(a.reportNamespaces=new Ye),a||je(a,`NO_I18NEXT_INSTANCE`,`useTranslation: You will need to pass in an i18next instance by using initReactI18next`);let o=(0,y.useMemo)(()=>({...Ue(),...a?.options?.react,...t}),[a,t]),{useSuspense:s,keyPrefix:c}=o,l=e||i||a?.options?.defaultNS,u=Ie(l)?[l]:l||[`translation`],d=(0,y.useMemo)(()=>u,u);a?.reportNamespaces?.addUsedNamespaces?.(d);let f=(0,y.useRef)(0),p=(0,y.useCallback)(e=>{if(!a)return et;let{bindI18n:t,bindI18nStore:n}=o,r=()=>{f.current+=1,e()};return t&&a.on(t,r),n&&a.store.on(n,r),()=>{t&&t.split(` `).forEach(e=>a.off(e,r)),n&&n.split(` `).forEach(e=>a.store.off(e,r))}},[a,o]),m=(0,y.useRef)(),h=(0,y.useCallback)(()=>{if(!a)return $e;let e=!!(a.isInitialized||a.initializedStoreOnce)&&d.every(e=>Fe(e,a,o)),n=t.lng||a.language,r=f.current,i=m.current;if(i&&i.ready===e&&i.lng===n&&i.keyPrefix===c&&i.revision===r)return i;let s={t:a.getFixedT(n,o.nsMode===`fallback`?d:d[0],c),ready:e,lng:n,keyPrefix:c,revision:r};return m.current=s,s},[a,d,c,o,t.lng]),[g,_]=(0,y.useState)(0),{t:v,ready:b}=(0,Qe.useSyncExternalStore)(p,h,h);(0,y.useEffect)(()=>{if(a&&!b&&!s){let e=()=>_(e=>e+1);t.lng?Pe(a,t.lng,d,e):Ne(a,d,e)}},[a,t.lng,d,b,s,g]);let x=a||{},S=(0,y.useRef)(null),C=(0,y.useRef)(),w=e=>{let t=Object.getOwnPropertyDescriptors(e);t.__original&&delete t.__original;let n=Object.create(Object.getPrototypeOf(e),t);if(!Object.prototype.hasOwnProperty.call(n,`__original`))try{Object.defineProperty(n,"__original",{value:e,writable:!1,enumerable:!1,configurable:!1})}catch{}return n},T=(0,y.useMemo)(()=>{let e=x,t=e?.language,n=e;e&&(S.current&&S.current.__original===e&&C.current===t?n=S.current:(n=w(e),S.current=n,C.current=t));let r=[v,n,b];return r.t=v,r.i18n=n,r.ready=b,r},[v,x,b,x.resolvedLanguage,x.language,x.languages]);if(a&&s&&!b)throw new Promise(e=>{let n=()=>e();t.lng?Pe(a,t.lng,d,n):Ne(a,d,n)});return T},{slice:tt,forEach:nt}=[];function rt(e){return nt.call(tt.call(arguments,1),t=>{if(t)for(let n in t)e[n]===void 0&&(e[n]=t[n])}),e}function it(e){return typeof e==`string`?[/<\s*script.*?>/i,/<\s*\/\s*script\s*>/i,/<\s*img.*?on\w+\s*=/i,/<\s*\w+\s*on\w+\s*=.*?>/i,/javascript\s*:/i,/vbscript\s*:/i,/expression\s*\(/i,/eval\s*\(/i,/alert\s*\(/i,/document\.cookie/i,/document\.write\s*\(/i,/window\.location/i,/innerHTML/i].some(t=>t.test(e)):!1}var at=/^[\u0009\u0020-\u007e\u0080-\u00ff]+$/,ot=function(e,t){let n=arguments.length>2&&arguments[2]!==void 0?arguments[2]:{path:`/`},r=`${e}=${encodeURIComponent(t)}`;if(n.maxAge>0){let e=n.maxAge-0;if(Number.isNaN(e))throw Error(`maxAge should be a Number`);r+=`; Max-Age=${Math.floor(e)}`}if(n.domain){if(!at.test(n.domain))throw TypeError(`option domain is invalid`);r+=`; Domain=${n.domain}`}if(n.path){if(!at.test(n.path))throw TypeError(`option path is invalid`);r+=`; Path=${n.path}`}if(n.expires){if(typeof n.expires.toUTCString!=`function`)throw TypeError(`option expires is invalid`);r+=`; Expires=${n.expires.toUTCString()}`}if(n.httpOnly&&(r+=`; HttpOnly`),n.secure&&(r+=`; Secure`),n.sameSite)switch(typeof n.sameSite==`string`?n.sameSite.toLowerCase():n.sameSite){case!0:r+=`; SameSite=Strict`;break;case`lax`:r+=`; SameSite=Lax`;break;case`strict`:r+=`; SameSite=Strict`;break;case`none`:r+=`; SameSite=None`;break;default:throw TypeError(`option sameSite is invalid`)}return n.partitioned&&(r+=`; Partitioned`),r},st={create(e,t,n,r){let i=arguments.length>4&&arguments[4]!==void 0?arguments[4]:{path:`/`,sameSite:`strict`};n&&(i.expires=new Date,i.expires.setTime(i.expires.getTime()+n*60*1e3)),r&&(i.domain=r),document.cookie=ot(e,t,i)},read(e){let t=`${e}=`,n=document.cookie.split(`;`);for(let e=0;e<n.length;e++){let r=n[e];for(;r.charAt(0)===` `;)r=r.substring(1,r.length);if(r.indexOf(t)===0)return r.substring(t.length,r.length)}return null},remove(e,t){this.create(e,``,-1,t)}},ct={name:`cookie`,lookup(e){let{lookupCookie:t}=e;if(t&&typeof document<`u`)return st.read(t)||void 0},cacheUserLanguage(e,t){let{lookupCookie:n,cookieMinutes:r,cookieDomain:i,cookieOptions:a}=t;n&&typeof document<`u`&&st.create(n,e,r,i,a)}},lt={name:`querystring`,lookup(e){let{lookupQuerystring:t}=e,n;if(typeof window<`u`){let{search:e}=window.location;!window.location.search&&window.location.hash?.indexOf(`?`)>-1&&(e=window.location.hash.substring(window.location.hash.indexOf(`?`)));let r=e.substring(1).split(`&`);for(let e=0;e<r.length;e++){let i=r[e].indexOf(`=`);i>0&&r[e].substring(0,i)===t&&(n=r[e].substring(i+1))}}return n}},ut={name:`hash`,lookup(e){let{lookupHash:t,lookupFromHashIndex:n}=e,r;if(typeof window<`u`){let{hash:e}=window.location;if(e&&e.length>2){let i=e.substring(1);if(t){let e=i.split(`&`);for(let n=0;n<e.length;n++){let i=e[n].indexOf(`=`);i>0&&e[n].substring(0,i)===t&&(r=e[n].substring(i+1))}}if(r)return r;if(!r&&n>-1){let t=e.match(/\/([a-zA-Z-]*)/g);return Array.isArray(t)?t[typeof n==`number`?n:0]?.replace(`/`,``):void 0}}}return r}},dt=null,ft=()=>{if(dt!==null)return dt;try{if(dt=typeof window<`u`&&window.localStorage!==null,!dt)return!1;let e=`i18next.translate.boo`;window.localStorage.setItem(e,`foo`),window.localStorage.removeItem(e)}catch{dt=!1}return dt},pt={name:`localStorage`,lookup(e){let{lookupLocalStorage:t}=e;if(t&&ft())return window.localStorage.getItem(t)||void 0},cacheUserLanguage(e,t){let{lookupLocalStorage:n}=t;n&&ft()&&window.localStorage.setItem(n,e)}},mt=null,ht=()=>{if(mt!==null)return mt;try{if(mt=typeof window<`u`&&window.sessionStorage!==null,!mt)return!1;let e=`i18next.translate.boo`;window.sessionStorage.setItem(e,`foo`),window.sessionStorage.removeItem(e)}catch{mt=!1}return mt},gt={name:`sessionStorage`,lookup(e){let{lookupSessionStorage:t}=e;if(t&&ht())return window.sessionStorage.getItem(t)||void 0},cacheUserLanguage(e,t){let{lookupSessionStorage:n}=t;n&&ht()&&window.sessionStorage.setItem(n,e)}},_t={name:`navigator`,lookup(e){let t=[];if(typeof navigator<`u`){let{languages:e,userLanguage:n,language:r}=navigator;if(e)for(let n=0;n<e.length;n++)t.push(e[n]);n&&t.push(n),r&&t.push(r)}return t.length>0?t:void 0}},vt={name:`htmlTag`,lookup(e){let{htmlTag:t}=e,n,r=t||(typeof document<`u`?document.documentElement:null);return r&&typeof r.getAttribute==`function`&&(n=r.getAttribute(`lang`)),n}},yt={name:`path`,lookup(e){let{lookupFromPathIndex:t}=e;if(typeof window>`u`)return;let n=window.location.pathname.match(/\/([a-zA-Z-]*)/g);if(Array.isArray(n))return n[typeof t==`number`?t:0]?.replace(`/`,``)}},bt={name:`subdomain`,lookup(e){let{lookupFromSubdomainIndex:t}=e,n=typeof t==`number`?t+1:1,r=typeof window<`u`&&window.location?.hostname?.match(/^(\w{2,5})\.(([a-z0-9-]{1,63}\.[a-z]{2,6})|localhost)/i);if(r)return r[n]}},xt=!1;try{document.cookie,xt=!0}catch{}var St=[`querystring`,`cookie`,`localStorage`,`sessionStorage`,`navigator`,`htmlTag`];xt||St.splice(1,1);var Ct=()=>({order:St,lookupQuerystring:`lng`,lookupCookie:`i18next`,lookupLocalStorage:`i18nextLng`,lookupSessionStorage:`i18nextLng`,caches:[`localStorage`],excludeCacheFor:[`cimode`],convertDetectedLanguage:e=>e}),wt=class{constructor(e){let t=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{};this.type=`languageDetector`,this.detectors={},this.init(e,t)}init(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:{languageUtils:{}},t=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{},n=arguments.length>2&&arguments[2]!==void 0?arguments[2]:{};this.services=e,this.options=rt(t,this.options||{},Ct()),typeof this.options.convertDetectedLanguage==`string`&&this.options.convertDetectedLanguage.indexOf(`15897`)>-1&&(this.options.convertDetectedLanguage=e=>e.replace(`-`,`_`)),this.options.lookupFromUrlIndex&&(this.options.lookupFromPathIndex=this.options.lookupFromUrlIndex),this.i18nOptions=n,this.addDetector(ct),this.addDetector(lt),this.addDetector(pt),this.addDetector(gt),this.addDetector(_t),this.addDetector(vt),this.addDetector(yt),this.addDetector(bt),this.addDetector(ut)}addDetector(e){return this.detectors[e.name]=e,this}detect(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:this.options.order,t=[];return e.forEach(e=>{if(this.detectors[e]){let n=this.detectors[e].lookup(this.options);n&&typeof n==`string`&&(n=[n]),n&&(t=t.concat(n))}}),t=t.filter(e=>e!=null&&!it(e)).map(e=>this.options.convertDetectedLanguage(e)),this.services&&this.services.languageUtils&&this.services.languageUtils.getBestMatchFromCodes?t:t.length>0?t[0]:null}cacheUserLanguage(e){let t=arguments.length>1&&arguments[1]!==void 0?arguments[1]:this.options.caches;t&&(this.options.excludeCacheFor&&this.options.excludeCacheFor.indexOf(e)>-1||t.forEach(t=>{this.detectors[t]&&this.detectors[t].cacheUserLanguage(e,this.options)}))}};wt.type=`languageDetector`;var Tt={en:{translation:{nav:{printers:`Printers`,archives:`Archives`,queue:`Print Queue`,stats:`Statistics`,profiles:`Profiles`,maintenance:`Maintenance`,projects:`Projects`,finance:`Finance`,inventory:`Filament`,files:`File Manager`,makerworld:`MakerWorld`,notifications:`Notifications`,settings:`Settings`,system:`System`,collapseSidebar:`Collapse sidebar`,expandSidebar:`Expand sidebar`,update:`Update`,updateAvailable:`Update available: v{{version}}`,updateAvailableBanner:`Version {{version}} is available!`,viewUpdate:`View update`,viewOnGithub:`View on GitHub`,keyboardShortcuts:`Keyboard shortcuts (?)`,switchToLight:`Switch to light mode`,switchToDark:`Switch to dark mode`,switchToSystem:`Switch to system mode`,smartSwitches:`Smart Switches`,logout:`Logout`,installApp:`Install app`,installAppSuccess:`Bambuddy was installed`},common:{plusNMore:`+{{count}} more`,save:`Save`,saving:`Saving...`,cancel:`Cancel`,delete:`Delete`,edit:`Edit`,add:`Add`,close:`Close`,confirm:`Confirm`,loading:`Loading...`,error:`Error`,errorLoading:`Error loading data`,retry:`Retry`,success:`Success`,warning:`Warning`,enabled:`Enabled`,disabled:`Disabled`,yes:`Yes`,no:`No`,on:`On`,off:`Off`,all:`All`,none:`None`,search:`Search`,filter:`Filter`,sort:`Sort`,refresh:`Refresh`,download:`Download`,upload:`Upload`,uploading:`Uploading...`,uploadFailed:`Upload failed`,actions:`Actions`,status:`Status`,name:`Name`,user:`User`,description:`Description`,date:`Date`,time:`Time`,hours:`hours`,minutes:`minutes`,seconds:`seconds`,days:`days`,enable:`Enable`,disable:`Disable`,permissions:`Permissions`,noPrinters:`No printers configured`,noData:`No data available`,linkNotFound:`Link not found`,required:`Required`,optional:`Optional`,dismiss:`Dismiss`,apply:`Apply`,reset:`Reset`,export:`Export`,import:`Import`,clear:`Clear`,selectAll:`Select All`,deselectAll:`Deselect All`,noChange:`— No change —`,unchanged:`Unchanged`,unassigned:`Unassigned`,unknown:`Unknown`,unknownError:`Unknown error`,today:`Today`,tomorrow:`Tomorrow`,asap:`ASAP`,overdue:`Overdue`,now:`Now`,collapse:`Collapse`,expand:`Expand`,previous:`Previous`,next:`Next`,viewArchive:`View archive`,viewInFileManager:`View in File Manager`,addedBy:`Added by {{username}}`,prints:`prints`,more:`+{{count}} more`,ascending:`Ascending`,descending:`Descending`,back:`Back`,copy:`Copy`,copied:`Copied!`,printer:`Printer`,remove:`Remove`,type:`Type`,print:`Print`,rename:`Rename`,move:`Move`,create:`Create`,duplicate:`Duplicate`,left:`Left`,right:`Right`,run:`Run`,running:`Running...`},finance:{allTypes:`All types`,allCostCenters:`All cost centers`,title:`Finance`,subtitle:`Wallet, personal transactions, and cost centers`,noAccess:`You do not have permission to view finance data.`,personalView:`Personal view`,adminView:`Admin view`,createCostCenter:`Create cost center`,adjustWallet:`Adjust wallet`,addManualPrint:`Add manual print`,manageMembers:`Manage cost center members`,currentBalance:`Personal balance`,transactions:`Transactions`,personalTransactions:`Personal transactions`,costCenters:`Cost centers`,availableForPrinting:`Available for print assignment`,costCenterName:`Name`,budgetType:`Budget type`,monthlyBudget:`Monthly budget`,totalBudget:`Total budget`,noBudget:`No budget`,create:`Create`,selectUser:`Select user`,transactionType:`Type`,amount:`Amount`,noCostCenter:`No cost center`,descriptionOptional:`Description (optional)`,applyAdjustment:`Apply adjustment`,memberCanPrint:`Member can print`,addMember:`Add member`,canPrint:`Can print`,noMembers:`No members assigned.`,editCostCenter:`Edit cost center`,myCostCenters:`My cost centers`,costCentersHint:`Review budget limits and keep costs under control`,noCostCenters:`No cost centers found.`,owner:`Owner`,balance:`Account balance`,unlimited:`Unlimited`,budgetPolicyHint:`Account balances track costs. Printing is limited only by the selected cost center budget; without a budget, printing is unlimited.`,budget:`Budget`,shared:`Shared`,cannotEditPrivateCostCenter:`Private cost centers cannot be edited here`,recentTransactions:`Recent transactions`,transactionsHint:`Filter by type and cost center`,first:`First`,prev:`Previous`,next:`Next`,last:`Last`,pageNumberOf:`Page {{page}} of {{total}}`,noTransactions:`No transactions available.`,noTransactionsForFilter:`No transactions match the selected filters.`,costCenter:`Cost center`,balanceAfter:`Balance after`,userWithId:`User #{{id}}`,partial:`Partial`,editTransaction:`Edit Transaction`,selectCostCenter:`Select cost center...`,costCenterRequired:`Please select a cost center`,amountExample:`e.g., 4.00`,manualAdjustmentExample:`e.g., Manual adjustment`,userRequired:`Please select a user`,amountInvalid:`Amount must be a valid number`,createdCostCenter:`Cost center created`,createCostCenterFailed:`Failed to create cost center`,transactionDeleted:`Transaction deleted`,deleteTransactionFailed:`Failed to delete transaction`,transactionEdited:`Transaction updated and ledger recalculated`,editTransactionFailed:`Failed to edit transaction`,manualPrintCreated:`Manual print charge added and ledger recalculated`,manualPrintFailed:`Failed to create manual print`,memberSaved:`Member saved`,memberSaveFailed:`Failed to save member`,memberRemoved:`Member removed`,memberRemoveFailed:`Failed to remove member`,costCenterNameRequired:`Cost center name is required`,costCenterUpdated:`Cost center updated`,costCenterUpdateFailed:`Failed to update cost center`,confirmDeleteCostCenter:`Delete cost center "{{name}}"?`,costCenterDeleted:`Cost center deleted`,costCenterDeleteFailed:`Failed to delete cost center`,deleteTransactionConfirm:`Delete this transaction? Balances will be recalculated automatically.`,deposit:`Deposit`,withdraw:`Withdraw`,printCharge:`Print charge`,deleteTransaction:`Delete transaction`},printers:{title:`Printers`,addPrinter:`Add Printer`,addPreflight:{checking:`Checking connection...`,warning:`Some connection checks failed. This printer may show as offline. Review the checks below, fix what you can, or save anyway.`,back:`Back`,saveAnyway:`Save anyway`},editPrinter:`Edit Printer`,deletePrinter:`Delete Printer`,printerName:`Printer Name`,serialNumber:`Serial Number`,ipAddress:`IP Address / Hostname`,accessCode:`Access Code`,model:`Model`,nozzleCount:`Nozzle Count`,autoArchive:`Auto Archive`,status:{available:`Available`,idle:`Idle`,printing:`Printing`,paused:`Paused`,offline:`Offline`,problem:`Problem`,error:`Error`,finished:`Finished`,unknown:`Unknown`},temperatures:{nozzle:`Nozzle`,bed:`Bed`,chamber:`Chamber`},heaterHistory:{title:`Heater History`,openLabel:`View heater history`,nozzle:`Nozzle`,nozzle2:`Nozzle 2`,bed:`Bed`,chamber:`Chamber`,error:`Failed to load history`,empty:`No data recorded yet`},progress:`{{percent}}% complete`,timeRemaining:`{{time}} remaining`,deleteConfirm:`Are you sure you want to delete "{{name}}"?`,maintenanceOk:`Maintenance OK`,maintenanceWarning:`{{count}} warning`,maintenanceWarning_plural:`{{count}} warnings`,maintenanceDue:`{{count}} due`,maintenanceDue_plural:`{{count}} due`,sort:{name:`Name`,status:`Status`,model:`Model`,location:`Location`,eta:`ETA`,ascending:`Sort ascending`,descending:`Sort descending`},cardSize:{small:`Small cards`,medium:`Medium cards`,large:`Large cards`,extraLarge:`Extra large cards`},pageView:{openCamWallPage:`Open cam wall as page`,cards:`Cards`,camWall:`Cam wall`},camWall:{page:{tokenRejected:`This Cam Wall link is no longer valid. The token may have expired or been revoked.`,loadFailed:`Could not load the printers.`},noPrinters:`No printers to show`,noSignal:`No signal`,live:`Live`,snap:`Snap`,off:`Off`,summary:`{{live}} live, {{snap}} snapshots, {{total}} total`,layer:`Layer {{cur}}/{{total}}`,timeLeft:`{{time}} left`,statusMode:{off:`Off`,compact:`Compact`,full:`Full`},settings:{title:`Cam wall settings`,maxLive:`Max live streams`,maxLiveHint:`How many tiles stream live at once. Others refresh as snapshots.`,snapshotInterval:`Snapshot interval (seconds)`,snapshotIntervalHint:`How often non-live tiles fetch a fresh snapshot.`,statusOverlay:`Status overlay`,statusOverlayHint:`Compact: state badge only. Full: + progress, layer, time left.`}},hideOffline:`Hide offline`,nextAvailable:`Next available`,powerOn:`Power On`,offlinePrintersWithPlugs:`Offline printers with smart plugs`,noPrintersConfigured:`No printers configured yet`,search:`Search printers...`,noSearchResults:`No printers match your search or filters`,filter:{allStatuses:`All statuses`,allLocations:`All locations`},toolbar:{filters:`Filters`,view:`View`,actions:`Actions`},readyToPrint:`Ready to print`,external:`External`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Delete print archives`,noLabel:`No label`,printPreview:`Print preview`,width:`Width`,height:`Height`,noObjectsFound:`No objects found`,objectsLoadedOnPrintStart:`Objects are loaded when a print starts`,willBeSkipped:`Will be skipped`,name:`Name`,serialCannotBeChanged:`Serial number cannot be changed`,locationHelp:`Used to group printers and filter queue jobs`,wifiSignal:{veryWeak:`Very weak`,weak:`Weak`,fair:`Fair`,good:`Good`,excellent:`Excellent`},maintenanceUpToDate:`All maintenance up to date - Click to view`,maintenance:{title:`In Maintenance`,subtitle:`This printer is paused — not connected, not eligible for the queue, not sending notifications.`,pillLabel:`Maintenance`,exitButton:`Exit maintenance`,menuEnter:`Enter maintenance mode`,menuExit:`Exit maintenance mode`,toastEntered:`{{name}} is now in maintenance mode`,toastExited:`{{name}} is back online`,confirmMidPrintTitle:`Enter maintenance mode mid-print?`,confirmMidPrintMessage:`{{name}} is currently printing. Entering maintenance mode will disconnect MQTT and stop progress tracking and completion notifications for this job. Continue?`,editFieldLabel:`Maintenance mode`,editFieldHelp:`When on, this printer is paused from MQTT, queue dispatch and notifications — useful for repair, parallel Bambuddy installs, or temporary suspension.`},chamberLightOn:`Turn on chamber light`,chamberLightOff:`Turn off chamber light`,files:`Files`,browseFiles:`Browse printer files`,autoOffAfterPrint:`Auto power-off after print`,autoOffExecuted:`Auto-off was executed - turn printer on to reset`,hmsErrors:`HMS Errors`,viewHmsErrors:`View {{count}} HMS error(s)`,resume:`Resume`,pause:`Pause`,stop:`Stop`,camera:`Camera`,skipObject:`Skip Object`,reconnect:`Reconnect`,forceRefresh:`Force Refresh`,forceRefreshSuccess:`Refresh requested`,mqttDebug:`MQTT Debug`,printerInformation:`Printer Information`,copyToClipboard:`Copy`,copied:`Copied!`,state:`State`,wifiSignalLabel:`WiFi Signal`,developerMode:`Developer Mode`,enabled:`Enabled`,disabled:`Disabled`,addedOn:`Added`,sdCard:`SD Card`,inserted:`Inserted`,notInserted:`Not inserted`,totalPrintHours:`Print Hours`,activeNozzle:`Active: {{nozzle}} nozzle`,amsSwitchInletTooltip:`Filament Track Switch IN-{{inlet}} ({{side}}) — feeds both nozzles`,nozzleRack:`Nozzle Rack`,nozzleDocked:`Docked`,nozzleMounted:`Mounted`,nozzleActive:`Active`,nozzleIdle:`Idle`,nozzleDiameter:`Diameter`,nozzleType:`Type`,nozzleStatus:`Status`,nozzleFilament:`Filament`,nozzleWear:`Wear`,nozzleMaxTemp:`Max Temp`,nozzleSerial:`Serial`,nozzleHardenedSteel:`Hardened Steel`,nozzleStainlessSteel:`Stainless Steel`,nozzleTungstenCarbide:`Tungsten Carbide`,nozzleFlow:`Flow`,nozzleHighFlow:`High Flow`,nozzleStandardFlow:`Standard`,firmwareUpdate:`Firmware Update`,firmwareInstructions:`On the printer's touchscreen, go to`,firmwareNav:`Navigate to`,settings:`Settings`,firmware:`Firmware`,discoverPrinters:`Discover Printers`,searching:`Searching...`,manualEntry:`Manual Entry`,addFromCloud:`Add from Cloud`,toast:{printerDeleted:`Printer deleted`,missingSpoolAssignment:`Print started on {{printer}}. Missing spool assignment for: {{slots}}`,killSwitchTriggered:`The billing kill switch stopped an unauthorized print on {{printer}}: {{filename}}`,billingChargeFailed:`Billing failed for {{filename}} on {{printer}}. The budget reservation was retained; check the server logs.`,assignmentVerified:`Filament loaded on slot {{slot}} ({{printer}})`,assignmentVerifiedNoKprofile:`Slot {{slot}} on {{printer}} loaded, but the flow calibration (K-profile) was not applied`,assignmentNotConfirmed:`Could not confirm the assignment for slot {{slot}} on {{printer}} — check the AMS slot`,printerAdded:`Printer added`,printerUpdated:`Printer updated`,failedToDelete:`Failed to delete printer`,failedToAdd:`Failed to add printer`,connectionFailedNotAdded:`Could not connect to the printer. Verify the IP, serial number, and access code, and confirm LAN-only mode is on. The printer was not added.`,failedToUpdate:`Failed to update printer`,commandSent:`Command sent`,failedToSendCommand:`Failed to send command`,turnedOn:`{{name}} turned on`,failedToPowerOn:`Failed to power on {{name}}`,scriptTriggered:`Script triggered`,printStopped:`Print stopped`,printPaused:`Print paused`,printResumed:`Print resumed`,referenceDeleted:`Reference deleted`,detectionAreaSaved:`Detection area saved`,failedToRunScript:`Failed to run script`,failedToStopPrint:`Failed to stop print`,failedToPausePrint:`Failed to pause print`,failedToResumePrint:`Failed to resume print`,failedToControlChamberLight:`Failed to control chamber light`,failedToSetSpeed:`Failed to set print speed`,failedToUpdateSetting:`Failed to update setting`,failedToSkipObjects:`Failed to skip objects`,failedToRereadRfid:`Failed to re-read RFID`,failedToCheckPlate:`Failed to check plate`,failedToUpdateLabel:`Failed to update label`,failedToDeleteReference:`Failed to delete reference`,failedToSaveDetectionArea:`Failed to save detection area`,plateCheckEnabled:`Plate check enabled`,plateCheckDisabled:`Plate check disabled`,calibrationSaved:`Calibration saved!`,calibrationFailed:`Calibration failed`,rfidRereadInitiated:`RFID re-read initiated`,loadInitiated:`Loading filament…`,unloadInitiated:`Unloading filament…`,failedToLoad:`Failed to load filament`,failedToUnload:`Failed to unload filament`},connection:{connected:`Connected`,offline:`Offline`},plateStatus:{markCleared:`Mark plate as cleared`,cleared:`Plate Clear`,notCleared:`Plate not Clear`,inUse:`Plate in Use`},queue:{inQueue:`{{count}} print in queue`,inQueue_plural:`{{count}} prints in queue`},controls:`Controls`,rfid:{reread:`Re-read RFID`},ams:{load:`Load`,unload:`Unload`,feedTitle:`Load {{slot}} to which nozzle?`,feedPrompt:`The Filament Track Switch can route this slot to either hotend. Choose which one to feed.`,feedLeft:`Left nozzle`,feedRight:`Right nozzle`,feedAlreadyLoaded:`Already loaded`,switchNotReady:`The Filament Track Switch is not set up yet. Assign every AMS to an inlet on the printer, then try again.`},bedJog:{limitWarning:`Travel limits are not enforced during manual moves — a Bambu firmware bug ignores software endstops for remote commands. Move carefully to avoid a collision.`,title:`Jog Controls`,bed:`Bed`,step:`Step (mm)`,up:`Move plate up`,down:`Move plate down`,toolheadUp:`Move toolhead up`,toolheadDown:`Move toolhead down`,disabledWhilePrinting:`Disabled while printing`,notHomedTitle:`Printer is not homed`,notHomedMessage:`The printer has not been homed since the last print. Run auto-home first for safe positioning (parks the toolhead, then homes X, Y, and Z), or move anyway — soft endstops will be bypassed.`,homeZ:`Auto Home`,moveAnyway:`Move anyway`,homingStarted:`Auto-homing printer…`},permission:{noAdd:`You do not have permission to add printers`,noEdit:`You do not have permission to edit printers`,noDelete:`You do not have permission to delete printers`,noControl:`You do not have permission to control printers`,noFiles:`You do not have permission to access printer files`,noAmsRfid:`You do not have permission to re-read AMS RFID`,noSmartPlugControl:`You do not have permission to control smart plugs`,noCamera:`You do not have permission to view cameras`},modal:{addTitle:`Add Printer`,editTitle:`Edit Printer`,myPrinter:`My Printer`,selectModel:`Select model...`,locationGroup:`Location / Group (optional)`,locationPlaceholder:`e.g., Workshop, Office, Basement`,autoArchiveLabel:`Auto-archive completed prints`,fromPrinterSettings:`From printer settings`,modelOptional:`Model (optional)`,saveChanges:`Save Changes`},skipObjects:{tooltip:`Skip objects`,onlyWhilePrinting:`Skip objects (only while printing)`,requiresMultiple:`Skip objects (requires 2+ objects)`,title:`Skip Objects`,matchIdsInfo:`Match IDs with your printer display`,printerShowsIds:`The printer screen shows object IDs on the build plate`,skipSelected:`Skip Selected`,skipping:`Skipping...`,noObjectsSelected:`No objects selected`,selectObjectsToSkip:`Select objects you want to skip from the current print`,skipped:`skipped`,objectsSkipped:`Objects skipped`,activeCount:`{{count}} active`,waitForLayer:`Wait for layer 2+ to skip objects (currently layer {{layer}})`,skip:`Skip`,confirmTitle:`Skip Object?`,confirmMessage:`Are you sure you want to skip "{{name}}"? This cannot be undone.`,confirmAllMessage:`All remaining objects are selected. This will stop the print job. Continue?`,confirmMultipleMessage:`Skip {{count}} selected objects? This cannot be undone.`},confirm:{deleteTitle:`Delete Printer`,deleteMessage:`Are you sure you want to delete "{{name}}"? This will remove all connection settings.`,deleteArchivesNote:`All print history for this printer will be permanently deleted.`,keepArchivesNote:`Print history will be kept but no longer associated with this printer.`,stopTitle:`Stop Print`,stopMessage:`Are you sure you want to stop the current print on "{{name}}"? This will cancel the print job.`,stopButton:`Stop Print`,pauseTitle:`Pause Print`,pauseMessage:`Are you sure you want to pause the current print on "{{name}}"?`,pauseButton:`Pause Print`,resumeTitle:`Resume Print`,resumeMessage:`Are you sure you want to resume the print on "{{name}}"?`,resumeButton:`Resume Print`,powerOnTitle:`Power On Printer`,powerOnMessage:`Are you sure you want to turn ON the power for "{{name}}"?`,powerOnButton:`Power On`,powerOffTitle:`Power Off Printer`,powerOffMessage:`Are you sure you want to turn OFF the power for "{{name}}"?`,powerOffWarning:`WARNING: "{{name}}" is currently printing! Are you sure you want to turn OFF the power? This will interrupt the print and may damage the printer.`,powerOffButton:`Power Off`,haToggleTitle:`Toggle "{{name}}"`,haToggleMessage:`Toggle the Home Assistant entity {{entity}}? This may turn power off if it is currently on.`,haToggleWarning:`WARNING: "{{name}}" is currently printing! Toggling {{entity}} may cut power and interrupt the print. Continue?`,haToggleButton:`Toggle`},bulk:{select:`Select`,selectAll:`Select All`,selectByLocation:`Select by Location`,selected:`{{count}} selected`,actions:{stop:`Stop`,pause:`Pause`,resume:`Resume`,clearPlate:`Clear Bed`,clearHMS:`Clear Notifications`},confirm:{stopTitle:`Stop {{count}} Prints`,stopMessage:`This will cancel active prints on {{count}} printer(s). This action cannot be undone.`,stopButton:`Stop All`,pauseTitle:`Pause {{count}} Prints`,pauseMessage:`This will pause active prints on {{count}} printer(s).`,pauseButton:`Pause All`,clearPlateTitle:`Clear {{count}} Print Beds`,clearPlateMessage:`This will clear the print bed on {{count}} printer(s) and may trigger queued jobs.`,clearPlateButton:`Clear All`},success:`{{action}} completed on {{count}} printer(s)`,partial:`{{succeeded}} succeeded, {{failed}} failed`,noneApplicable:`No selected printers are in the right state for this action`,selectByState:`Select by State`},discovery:{title:`Discover Printers`,searching:`Searching...`,scanning:`Scanning...`,scanProgress:`Scanning... {{scanned}}/{{total}}`,foundPrinters:`Found {{count}} printer(s)`,noPrintersFound:`No printers found`,noPrintersFoundSubnet:`No printers found in the specified subnet.`,noPrintersFoundNetwork:`No printers found on the network.`,allConfigured:`All discovered printers are already configured.`,alreadyAdded:`Already added`,select:`Select`,manualEntry:`Manual Entry`,addFromCloud:`Add from Cloud`,subnetToScan:`Subnet to scan`,dockerNote:`Docker detected. Enter your printer's subnet in CIDR notation. Requires network_mode: host in docker-compose.yml.`,scanSubnet:`Scan Subnet for Printers`,discoverNetwork:`Discover Printers on Network`,scanningSubnet:`Scanning subnet for Bambu printers...`,scanningNetwork:`Scanning network...`,serialRequired:`Serial required`,unknown:`Unknown`,failedToStart:`Failed to start discovery`,customSubnetOption:`Custom subnet...`,customSubnetLabel:`Custom subnet (CIDR)`,customSubnetNote:`Use a custom subnet if your printer is on a different network than this server. The FTP (990) and MQTT (8883) ports must be reachable across the routing boundary.`},drying:{start:`Start Drying`,stop:`Stop Drying`,temperature:`Temperature`,duration:`Duration`,hours:`hours`,timeRemaining:`{{time}} left`,active:`Drying`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`Drying not supported`,powerRequired:`Connect AMS power adapter to enable drying`,cannotDryNow:`AMS can't start drying right now`,startingDrying:`Starting drying...`,toastCommandSent:`Drying command sent`,toastStopped:`Drying stopped`,toastNotStarted:`The printer accepted the command but the AMS never started drying. Check that the AMS power adapter is connected and that the printer is idle.`,screenOnly:`AMS drying on this printer can only be controlled from the printer's own screen (Bambu limitation)`,stoppingDrying:`Stopping drying...`,rotateTray:`Rotate spool during drying`,rotateUnavailableReason:`Unavailable — a slot in this AMS is loaded to the toolhead. The spool is locked by the feed tube and cannot rotate. Retract the filament first.`,startMode:`Start time`,modeNow:`Now`,modeDelay:`After delay`,modeAtTime:`At time`,schedule:`Schedule`,scheduledFor:`Drying scheduled for {{time}}`,scheduledAsap:`Drying scheduled (waiting for printer)`,cancelScheduled:`Cancel scheduled drying`,scheduleFailed:`Failed to schedule drying`,retractFilament:`Retract the filament at the AMS outlet to start drying`,waitingAmsNotFound:`Waiting for the AMS to be detected`,waitingOffline:`Waiting for the printer to come online`,waitingPrinterBusy:`Waiting for the printer to be free`,waitingAlreadyDrying:`Waiting for the current drying cycle to finish`,waitingInterrupted:`Interrupted, will restart when the printer is free`,scheduleFailedReason:`Scheduled drying failed: {{reason}}`,scheduleFailedUnknown:`Unknown error`,dismissFailed:`Dismiss`},amsBackup:{titleOn:`AMS Filament Backup is ON. Click to disable.`,titleOff:`AMS Filament Backup is OFF. Click to enable.`,titleUnknown:`AMS Filament Backup status unavailable on this printer.`,toastEnabled:`AMS Filament Backup enabled`,toastDisabled:`AMS Filament Backup disabled`,modalTitle:`AMS Filament Backup`,modalHelp:`When the active slot runs out, the printer cycles through any matching same-preset, same-colour slots in this order.`,modalNoSlots:`No filament loaded.`,modalNoPairs:`No backup pairs — no two slots share the same filament profile and colour.`,extruderRightShort:`R`,extruderLeftShort:`L`,stateOn:`Enabled`,stateOff:`Disabled`,stateUnknown:`Unsupported on this printer`},activeJobSlot:{title:`This slot is filament {{n}} in the active print`,ariaLabel:`Active print slot {{n}}`},expectedSlot:{title:`The printer is waiting for filament in this slot`,ariaLabel:`Expected filament slot {{n}}`,label:`{{ams}} · Slot {{slot}}`,external:`External spool`},filaments:`Filaments`,externalSpool:{hide:`Hide external spool`,show:`Show external spool`},openCameraOverlay:`Open camera overlay`,openCameraWindow:`Open camera in new window`,firmwareUpdateAvailable:`Firmware update available: {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — Up to date`,firmwareUpdateButton:`Update`,plateDetection:{noPermission:`You do not have permission to update printers`,enabledClick:`Plate check enabled - Click to disable`,disabledClick:`Plate check disabled - Click to enable`,manageCalibration:`Manage plate detection calibration`,calibrationRequired:`Calibration Required`,calibrationInstructions:`Please ensure the build plate is <strong>completely empty</strong>, then click Calibrate.`,calibrationDescription:`Calibration captures a reference image of the empty plate. Future checks will compare against this reference to detect objects.`,calibrationTip:`<strong>Tip:</strong> You can store up to 5 calibrations for different plates. The system automatically uses the best match when checking.`,plateEmpty:`Plate appears empty`,objectsDetected:`Objects detected on plate`,confidence:`Confidence`,difference:`Difference`,analysisPreview:`Analysis preview:`,analysisLegend:`Green box = detection area, Red overlay = differences from calibration`,savedReferences:`Saved References ({{count}}/{{max}})`,deleteReference:`Delete reference`,labelPlaceholder:`Label...`,clickToEdit:`{{label}} - Click to edit`,clickToAddLabel:`Click to add label`},speed:{title:`Print Speed`,silent:`Silent (50%)`,standard:`Standard (100%)`,sport:`Sport (124%)`,ludicrous:`Ludicrous (166%)`},airduct:{title:`Airduct Mode`,cooling:`Cooling`,heating:`Heating`},noSdCard:`No SD`,door:{open:`Open`,closed:`Closed`},fans:{partCooling:`Part Cooling Fan`,auxiliary:`Auxiliary Fan`,leftAuxiliary:`Left Auxiliary Fan`,exhaust:`Exhaust`,chamber:`Chamber Fan`},clickToViewHmsErrors:`Click to view HMS errors`,aiDetection:{safe:`Safe`,warning:`Warning`,failure:`Failure`,idle:`Idle`,error:`Not checking`,unknown:`Starting`,tooltipError:`AI Failure Detection is not checking this print: {{reason}} - click for details`,tooltipUnknown:`AI Failure Detection: waiting for the first result - click for details`,errorHint:`This print is not being checked. Detection resumes automatically once the problem below is fixed.`,tooltip:`AI Failure Detection: {{status}} (score {{score}}) - click for details`,tooltipIdle:`AI Failure Detection enabled - monitoring starts with the next print - click for details`,modalTitle:`AI Failure Detection - {{name}}`,currentStatus:`Status`,score:`Score`,framesAnalyzed:`Frames analyzed`,idleHint:`No print is being monitored right now. Monitoring starts automatically with the next print.`,lastError:`Last error`,openSettings:`Open settings`},estimatedCompletion:`Estimated completion time`,plateNumber:`Plate {{number}}`,slotOptions:`Slot options`,amsPopup:{friendlyName:`AMS Name`,friendlyNamePlaceholder:`e.g. AMS Friendly Name`,serialNumber:`Serial Number`,firmwareVersion:`Firmware`,save:`Save`,clear:`Clear`,noEditPermission:`You do not have permission to rename AMS units`},firmwareModal:{title:`Firmware Update`,titleUpToDate:`Firmware Info`,currentVersion:`Current:`,latestVersion:`Latest:`,releaseNotes:`Release Notes`,checkingPrereqs:`Checking prerequisites...`,sdCardReady:`SD card ready. Click below to upload firmware.`,uploadedSuccess:`Firmware uploaded to SD card!`,applyInstructions:`To apply the update on your printer:`,step1:`On the printer's touchscreen, go to <strong>Settings</strong>`,step2:`Navigate to <strong>Firmware</strong>`,step3:`Select <strong>Update from SD card</strong>`,step4:`The update will take 10-20 minutes`,done:`Done`,starting:`Starting...`,uploadFirmware:`Upload Firmware`,uploadFailed:`Failed to start upload: {{error}}`,uploadedToast:`Firmware uploaded! Trigger update from printer screen.`,availableVersions:`Available versions`,usable:`Usable`,unavailable:`Unavailable`,installed:`Installed`,newerBadge:`newer`,olderBadge:`older`,currentBadge:`current`},accessCodePlaceholder:`Leave empty to keep current`,roi:{title:`Detection Area (ROI)`,xStart:`X Start`,yStart:`Y Start`,width:`Width`,height:`Height`,instruction:`Adjust the detection area to focus on the build plate. The green box in the preview shows the current area.`},developerModeWarning:`Developer LAN mode is not enabled on: {{names}}. Some features may not work.`,howToEnable:`How to enable`,incompatibleFile:`This file was sliced for {{slicedFor}}, but this printer is a {{printerModel}}`,dropNotPrintable:`Only .gcode and .gcode.3mf files can be printed`,dropToPrint:`Drop to print`,dropToQueue:`Drop to queue`},archives:{media:{title:`Print videos`,download:`Download print videos`,searching:`Checking the printer for videos…`,searchFailed:`Could not check the printer for videos.`,none:`No timelapse or IP camera chunks were found for this print.`,attachedTimelapse:`Attached timelapse`,printerFiles:`Files still on the printer`,downloadSelected:`Download selected`,printerMissing:`Printer is no longer configured`,timelapseUnavailable:`The timelapse directory could not be read`,ipcamUnavailable:`The IP camera directory could not be read`},title:`Print Archives`,no3mfBanner:{title:`Some recent prints couldn't be archived with thumbnails`,body:`The slicer didn't leave the .gcode.3mf on the printer's SD card, so Bambuddy couldn't pull the thumbnail or slicer metadata. This is usually because "Store sent files on external storage" is off in the slicer (Bambu Studio / OrcaSlicer Device tab).`,docsLink:`See install step 4`,dismissLabel:`Dismiss this notice`,docsLinkInternalStorage:`Why this happens`,titleInternalStorage:`Some recent prints stayed on the printer's internal storage`,bodyInternalStorage:`Bambu Studio put the sliced file on the printer's internal storage instead of the card, so there was nothing for Bambuddy to read over FTP. On H2-series, P2S and X2D its Print button always does that — only Send offers a choice, and that defaults to Cache too. Those prints are still archived with their name and timing, just without a thumbnail or slicer metadata. For complete archives, start the print from Bambuddy, or slice in OrcaSlicer — or in Bambu Studio use Send with External selected and start the print afterwards. All of them need a card or stick in the printer.`,titleNoExternalStorage:`Some recent prints couldn't be archived — no storage in the printer`,bodyNoExternalStorage:`The printer reports no card or stick in its slot, so the sliced file had nowhere to land and Bambuddy had nothing to read. Insert one and the next print will archive in full.`,titleInternalHistory:`Some recent prints were started from a file already on the printer`,bodyInternalHistory:`Those prints ran from the printer's own library — a re-print from its screen, a start from Handy, or a file sent earlier and printed later. Bambuddy reads print files over FTP, which serves only the card or stick, while the printer keeps that library in an area FTP cannot reach, so there was no 3MF to read. No slicer setting changes this, because nothing was sent for these prints. They are still archived with their name and timing, and Edit Archive lets you fill in the filament used by hand. For a complete archive, start the print from Bambuddy or from your slicer instead.`,titleFtpsCooloff:`Some recent prints couldn't be archived — the printer refused the file connection`,bodyFtpsCooloff:`Bambuddy opened the printer's file-transfer port (FTPS 990) and the printer answered with something that is not TLS, so nothing could be read from it. Those prints are still archived with their name and timing, just without a thumbnail or slicer metadata. This is not a slicer setting and not something you changed — the same models and firmware run normally on other installs, and an affected printer usually works again later on its own. After such a failure Bambuddy pauses transfers to that printer for five minutes and comes back for the file once the pause clears, so a short episode fills itself in; a card still empty means the refusal outlasted the retry. What triggers it is not yet known. If it keeps happening, turn on debug logging on the System page and attach a support bundle to your report.`,titleFtpTransferFailed:`Some recent prints couldn't be archived — the file transfer ran out of time`,bodyFtpTransferFailed:`The sliced file was on the printer's card and the printer served it, but the transfer did not finish in the time allowed. At print start the printer is also handling its camera, its status messages and the job upload, and a large 3MF does not always get through against all that. Those prints are still archived with their name and timing, just without a thumbnail or slicer metadata. This is not a slicer setting and not something you changed. Bambuddy comes back for the file three times over the following ten minutes, so most of these fill themselves in; a card still empty means every attempt ran out of time too. If it keeps happening, raise Connection Timeout under Settings > Network > FTP Retry.`},searchPlaceholder:`Search archives...`,filterByPrinter:`Filter by printer`,filterByStatus:`Filter by status`,sortBy:`Sort by`,sortNewest:`Newest first`,sortOldest:`Oldest first`,sortName:`Name`,sortDuration:`Duration`,sortLargest:`Largest first`,sortSmallest:`Smallest first`,sortSize:`Size`,noArchives:`No archives found`,noArchivesSearch:`No archives match your search`,originalPrintNotVisible:`Original print not visible - try clearing filters`,noArchivesYet:`No archives yet`,prints:`prints`,pagination:{showing:`Showing`,to:`to`,of:`of`,show:`Show`,page:`Page`,all:`All`},loadingArchives:`Loading archives...`,releaseToUpload:`Release to upload`,showAll:`Show all`,showFavoritesOnly:`Show favorites only`,gridView:`Grid view`,listView:`List view`,calendarView:`Calendar view`,logView:`Print Log`,manageTags:`Manage Tags`,showFailedPrints:`Show failed prints`,hideFailedPrints:`Hide failed prints`,hideDuplicates:`Hide Duplicates`,viewOriginalPrint:`Click to view original print (#{{id}})`,printTime:`Print Time`,filamentUsed:`Filament Used`,cost:`Cost`,preview:`Preview`,deleteArchive:`Delete Archive`,deleteConfirm:`Are you sure you want to delete this archive?`,favorite:`Favorite`,unfavorite:`Remove from favorites`,viewDetails:`View Details`,status:{completed:`Completed`,failed:`Failed`,stopped:`Stopped`},toast:{source3mfAttached:`Source 3MF attached: {{filename}}`,failedUploadSource3mf:`Failed to upload source 3MF`,source3mfRemoved:`Source 3MF removed`,failedRemoveSource3mf:`Failed to remove source 3MF`,f3dAttached:`F3D attached: {{filename}}`,failedUploadF3d:`Failed to upload F3D`,f3dRemoved:`F3D removed`,failedRemoveF3d:`Failed to remove F3D`,timelapseAttached:`Timelapse attached: {{filename}}`,timelapseAlreadyAttached:`Timelapse already attached`,noMatchingTimelapse:`No matching timelapse found`,failedScanTimelapse:`Failed to scan for timelapse`,failedAttachTimelapse:`Failed to attach timelapse`,timelapseRemoved:`Timelapse removed`,failedRemoveTimelapse:`Failed to remove timelapse`,timelapseUploaded:`Timelapse uploaded: {{filename}}`,failedUploadTimelapse:`Failed to upload timelapse`,archiveDeleted:`Archive deleted`,failedDeleteArchive:`Failed to delete archive`,addedToFavorites:`Added to favorites`,removedFromFavorites:`Removed from favorites`,projectUpdated:`Project updated`,failedUpdateProject:`Failed to update project`,linkCopied:`Link copied to clipboard`,failedCopyLink:`Failed to copy link`,photoDeleted:`Photo deleted`,failedDeletePhoto:`Failed to delete photo`,failedDeleteArchives:`Failed to delete archives`,failedUpdateFavorites:`Failed to update favorites`,exportDownloaded:`Export downloaded`,exportFailed:`Export failed`},menu:{print:`Print`,openInBambuStudio:`Open in Slicer`,slice:`Slice`,externalLink:`External Link`,viewOnMakerWorld:`View on MakerWorld`,preview3d:`3D Preview`,viewTimelapse:`View Timelapse`,scanForTimelapse:`Scan for Timelapse`,uploadTimelapse:`Upload Timelapse`,removeTimelapse:`Remove Timelapse`,downloadSource3mf:`Download Source 3MF`,uploadSource3mf:`Upload Source 3MF`,replaceSource3mf:`Replace Source 3MF`,removeSource3mf:`Remove Source 3MF`,uploadF3d:`Upload F3D`,replaceF3d:`Replace F3D`,downloadF3d:`Download F3D`,removeF3d:`Remove F3D`,download:`Download`,copyDownloadLink:`Copy Download Link`,qrCode:`QR Code`,viewPhotos:`View Photos`,viewPhotosCount:`View Photos ({{count}})`,projectPage:`Project Page`,addToFavorites:`Add to Favorites`,removeFromFavorites:`Remove from Favorites`,edit:`Edit`,printLog:`Print Log`,goToProject:`Go to Project: {{name}}`,addToProject:`Add to Project`,removeFromProject:`Remove from Project`,loading:`Loading...`,noProjectsAvailable:`No projects available`,searchProjects:`Search projects…`,select:`Select`,deselect:`Deselect`,delete:`Delete`},permission:{noReprint:`You do not have permission to reprint this archive`,noAddToQueue:`You do not have permission to add to queue`,noUpdateArchives:`You do not have permission to update archives`,noUploadFiles:`You do not have permission to upload files`,noDownload:`You do not have permission to download archives`,noCopyLink:`You do not have permission to copy download links`,noDelete:`You do not have permission to delete this archive`,noEdit:`You do not have permission to edit this entry`,noCreate:`You do not have permission to create archives`},platePicker:{title:`Select plate to preview`,hint:`This archive has multiple plates. Pick one to open in the GCode viewer.`,plateLabel:`Plate {{index}}`,objectCount:`{{count}} object`,objectCount_plural:`{{count}} objects`,noGcode:`This archive has no sliced G-code to preview. Open it in Bambu Studio to slice first.`},card:{previousPlate:`Previous plate`,nextPlate:`Next plate`,plateNumber:`Plate {{index}}`,moreOptions:`Right-click for more options`,addToFavorites:`Add to favorites`,removeFromFavorites:`Remove from favorites`,cancelled:`cancelled`,failed:`failed`,duplicate:`duplicate`,duplicateTitle:`This model has been printed before`,openSource3mf:`Open source 3MF in Bambu Studio (right-click for more options)`,downloadF3d:`Download Fusion 360 design file`,viewTimelapse:`View timelapse`,viewPhoto:`View 1 photo`,viewPhotos:`View {{count}} photos`,openFolder:`Open folder: {{name}}`,slicedFile:`Sliced file - ready to print`,sourceFile:`Source file only - no AMS mapping available`,gcode:`GCODE`,source:`SOURCE`,project:`Project: {{name}}`,runsBadge:`{{count}} prints`,runsBadgeTitle:`{{count}} prints total — {{successful}} successful, {{failed}} failed. Click to see the full print log.`,estimated:`Estimated: {{time}}`,actual:`Actual: {{time}}`,accuracy:`Accuracy: {{percent}}%`,filament:`{{weight}}g`,layer:`{{count}} layer`,layers:`{{count}} layers`,object:`{{count}} object`,objects:`{{count}} objects`,slicedFor:`Sliced for {{model}}`,uploadedBy:`Uploaded By`,noPermissionReprint:`You do not have permission to reprint`,noFileForReprint:`No 3MF file available — the file could not be downloaded from the printer when the print was recorded`,slicerAmsMapping:`AMS mapping saved ({{printer}})`,slicerAmsMappingTooltip:`The slicer's own AMS slot choice was saved for {{printer}}. Tray numbers only mean something on that printer, so a reprint reuses them only when it targets {{printer}} again.`,noPermissionEdit:`You do not have permission to edit archives`,noPermissionDelete:`You do not have permission to delete archives`,openInBambuStudio:`Open in Slicer`,openInBambuStudioToSlice:`Open in Slicer to slice`,slice:`Slice`,externalLink:`External Link`,makerWorld:`MakerWorld: {{designer}}`,viewProject:`View project`,noExternalLink:`No external link`,preview3d:`3D Preview`,download:`Download`,edit:`Edit`,delete:`Delete`},runLog:{title:`Print Log`,modalTitle:`Print Log — {{name}}`,modalTitleFallback:`this archive`,empty:`No print events recorded for this archive yet.`,col:{date:`Date`,status:`Status`,duration:`Duration`,filament:`Filament`,cost:`Cost`},status:{completed:`Completed`,failed:`Failed`,cancelled:`Cancelled`,stopped:`Stopped`,skipped:`Skipped`,printing:`Printing`}},modal:{deleteArchive:`Delete Archive`,deleteConfirm:`Are you sure you want to delete "{{name}}"? This action cannot be undone.`,deleteButton:`Delete`,deletePurgeStats:`Also remove this print from Quick Stats (filament, time, cost, energy)`,deleteQueueItemsWarning:`{{count}} queue item(s) linked to this archive will also be removed.`,deleteBlockedByPrinting:`Cannot delete — {{count}} queue item(s) are currently printing. Stop the print first, then retry.`,removeSource3mf:`Remove Source 3MF`,removeSource3mfConfirm:`Are you sure you want to remove the source 3MF file from "{{name}}"? This will delete the original slicer project file.`,removeButton:`Remove`,removeF3d:`Remove F3D`,removeF3dConfirm:`Are you sure you want to remove the Fusion 360 design file from "{{name}}"?`,removeTimelapse:`Remove Timelapse`,removeTimelapseConfirm:`Are you sure you want to remove the timelapse video from "{{name}}"?`,timelapse:`{{name}} - Timelapse`,selectTimelapse:`Select Timelapse`,selectTimelapseDesc:`No auto-match found. Select the timelapse for this print:`,deleteArchives:`Delete Archives`,deleteArchivesConfirm:`Are you sure you want to delete {{count}} archive(s)? This action cannot be undone.`,deleteCount:`Delete {{count}}`},page:{title:`Archives`,printsCount:`{{filtered}} of {{total}} prints`,dropFilesHere:`Drop .3mf files here`,releaseToUpload:`Release to upload`,only3mfSupported:`Only .3mf files are supported`,close:`Close`,selected:`{{count}} selected`,selectAll:`Select All`,tags:`Tags`,project:`Project`,favorite:`Favorite`,delete:`Delete`,toggledFavorites:`Toggled favorites for {{count}} archive(s)`,failedUpdateFavorites:`Failed to update favorites`,archivesDeleted:`{{count}} archive(s) deleted`,failedDeleteArchives:`Failed to delete archives`,photoDeleted:`Photo deleted`,failedDeletePhoto:`Failed to delete photo`},list:{name:`Name`,printer:`Printer`,date:`Date`,size:`Size`,actions:`Actions`,hasTimelapse:`Has timelapse`},log:{date:`Date`,printName:`Print Name`,printer:`Printer`,user:`User`,status:`Status`,duration:`Duration`,filament:`Filament`,filamentUsed:`Filament Used`,cost:`Cost`,energy:`Energy`,energyCost:`Energy Cost`,completedAt:`Finished`,columns:`Columns`,sortBy:`Sort by {{column}}`,allPrinters:`All Printers`,allUsers:`All Users`,allStatuses:`All Statuses`,cancelled:`Cancelled`,skipped:`Skipped`,dateFrom:`From`,dateTo:`To`,noEntries:`No print log entries found`,showing:`Showing {{count}} of {{total}} entries`,rowsPerPage:`Rows`,page:`Page`,prev:`Prev`,next:`Next`,clearLog:`Clear Log`,clearLogTitle:`Clear Print Log`,clearLogConfirm:`All print log entries will be permanently deleted. Archives and queue items are not affected. This action cannot be undone. Are you sure?`,clearLogButton:`Clear All`,cleared:`{{count}} log entries cleared`,clearFailed:`Failed to clear print log`,deleteEntryTitle:`Delete print log entry`,deleteEntryConfirm:`This entry will be removed from the log and its filament, time, and cost contributions will drop out of Quick Stats. The matching archive (if any) is not affected. This action cannot be undone.`,entryDeleted:`Print log entry deleted`,entryDeleteFailed:`Failed to delete print log entry`,editEntryTitle:`Edit print log entry`,editEntryDescription:`Classify this print run. The Failure Analysis widget groups by these values, so updates flow through to stats immediately.`,entryUpdated:`Print log entry updated`,entryUpdateFailed:`Failed to update print log entry`,statuses:{completed:`Completed`,failed:`Failed`,stopped:`Stopped`,cancelled:`Cancelled`,skipped:`Skipped`}}},dispatchToast:{untitled:`Print job`,startingPrints:`Starting prints`,progressSummary:`{{complete}}/{{total}} complete • Processing: {{processing}}`,expandDetails:`Expand dispatch details`,collapseDetails:`Collapse dispatch details`,awaitingPrinter:`Awaiting printer…`,status:{processing:`Processing`,completed:`Completed`,failed:`Failed`},failed:{generic:`Dispatch failed`,upload_failed:`Upload to printer failed`,start_command_failed:`Printer rejected start command`},dismiss:`Dismiss`},pipelineRuns:{title:`Pipeline Runs`,loading:`Loading…`,empty:`No pipeline runs yet.`,filter:{pipeline:`Pipeline`,status:`Status`,target:`Target`,all:`All`,allPipelines:`All pipelines`,allStatus:`All statuses`,allTargets:`All targets`,clear:`Clear filters`,noMatches:`No runs match the current filters.`},totalCount_one:`{{n}} run`,totalCount_other:`{{n}} runs`,copies:`{{n}} copies`,failedCount:`{{n}} failed`,copyN:`Copy {{n}}`,retryFailed:`Retry failed`,retryOf:`retry of #{{n}}`,pagination:`{{start}}–{{end}} of {{total}}`,cancelledByUser:`Cancelled by user`,toast:{cancelled:`Run cancelled`,cancelFailed:`Cancel failed`,retryStarted:`Retry started`,retryFailed:`Retry failed`,cleared:`{{n}} runs cleared`,clearFailed:`Clear failed`},clearLog:`Clear log`,clearConfirmTitle:`Clear log?`,clearConfirmBody:`Delete every completed, failed, cancelled, and partial-failure pipeline run? In-flight runs are kept. This cannot be undone.`,clearConfirmAction:`Clear`,jobStatus:{pending:`pending`,awaiting_printer:`awaiting printer`,queued:`queued`,printing:`printing`,completed:`completed`,failed:`failed`,cancelled:`cancelled`}},queue:{title:`Print Queue`,subtitle:`Schedule and manage your print jobs`,filamentShort:{rowBadge:`Insufficient filament for the assigned spool`,rowTooltip:`The dispatch scheduler flagged this item. Click Play to see the per-slot deficit and decide whether to print anyway.`,confirmTitle:`Insufficient filament`,confirmIntro:`The assigned spool cannot satisfy at least one slot. Print anyway?`,lineItem:`Slot {{slot}}: needs {{required}} g, {{remaining}} g remaining`,unknown:`unknown`,printAnyway:`Print Anyway`},slicerAmsMapping:{rowBadge:`AMS slots saved for this printer`,rowTooltip:`This archive carries the exact AMS slots the slicer picked, saved for the printer this item targets. A reprint on it can reuse those trays instead of matching again by type and colour.`},editQueueItem:`Edit Queue Item`,selectAllPlates:`Select All {{count}} Plates`,deselectAll:`Deselect All`,printQueued:`Print queued`,printQueuedWillStartWhenIdle:`Will start when printer is idle`,itemsQueued:`{{count}} items queued`,sending:`Sending...`,sendingProgress:`Sending {{current}}/{{total}}...`,adding:`Adding...`,addingProgress:`Adding {{current}}/{{total}}...`,savingProgress:`Saving {{current}}/{{total}}...`,clearQueue:`Clear Queue`,clearHistory:`Clear History`,emptyQueue:`Queue is empty`,position:`Position`,scheduledTime:`Scheduled Time`,moveUp:`Move Up`,moveDown:`Move Down`,startNow:`Start Now`,printingInProgress:`Printing in progress...`,viewArchive:`View archive`,viewInFileManager:`View in File Manager`,itemCount:`{{count}} item`,itemCount_plural:`{{count}} items`,dragToReorder:`Drag to reorder (ASAP only)`,reorderHint:`Position only affects ASAP items. Scheduled items run at their set time.`,sjf:{label:`SJF`,tooltip:`Shortest Job First — scheduler prioritizes shorter prints`},addedBy:`Added by {{name}}`,nextInQueue:`Next in queue`,clearPlateSuccess:`Plate cleared — ready for next print`,plateNumber:`Plate {{index}}`,quantity:`Quantity`,quantityHint:`Creates {{count}} queue items`,plateQuantityLabel:`Runs of {{plate}}`,plateQuantityTotal_one:`{{count}} run in total`,plateQuantityTotal_other:`{{count}} runs in total`,batchOrders:{title:`Batch Orders`,emptyTitle:`No batch orders`,emptyDescription:`Queue a multi-plate file, or more than one copy of a plate, and the order shows up here with its progress.`,filter:{active:`Active`,completed:`Completed`,cancelled:`Cancelled`,all:`All`},status:{active:`Active`,completed:`Completed`,cancelled:`Cancelled`},noTargets:`Grouping only`,noTargetsHint:`Created before per-plate targets existed, so it tracks the runs it queued rather than a target.`,dispatchRemaining:`Queue {{count}} remaining`,dispatchPlate:`Queue remaining`,strandedPlate:`Nothing left to copy settings from`,strandedNotice:`Cannot queue {{runs}} of the {{owed}} runs still owed: that plate has no queued or finished run left to copy settings from. Queue the plate once from the file, or cancel the order.`,dispatched:`Queued the remaining runs for {{name}}`,plateProgress:`{{completed}} of {{target}} done`,remaining:`{{count}} still owed`,failed:`{{count}} failed`,printing:`{{count}} printing`,wholeFile:`Whole file`,due:`Due {{date}}`,costSoFar:`{{amount}} so far`,costRemaining:`({{amount}} to go)`},activeBatches:`Active Batches`,batchProgress:`{{completed}} of {{total}} completed`,cancelBatch:`Cancel Remaining`,batchCancelled:`Remaining batch items cancelled`,cancelBatchConfirmTitle:`Cancel Batch`,cancelBatchConfirmMessage:`Close this order? Any runs still queued are cancelled, and it stops asking for what it has not produced.`,batch:{defaultName:`Batch`,label:`{{count}} item`,label_plural:`{{count}} items`,pendingCount:`{{count}} pending`,pendingCount_plural:`{{count}} pending`,expand:`Expand batch`,collapse:`Collapse batch`,groupAsBatch:`Group as batch…`,groupAsBatchDescription:`Combine the {{count}} selected items into a single collapsible batch.`,nameLabel:`Batch name`,namePlaceholder:`e.g. Friday gifts`,create:`Create batch`,ungroup:`Ungroup`,ungroupConfirmTitle:`Ungroup batch?`,ungroupConfirmMessage:`The items will stay in the queue but no longer be grouped together.`,dragGroup:`Drag group`},tabs:{batches:`Batches`,queue:`Queue`,history:`History`,timeline:`Timeline`,pipelines:`Pipelines`},layout:{flatList:`List`,byPrinter:`By Printer`,groupByPrinter:`Group by Printer`},history:{emptyTitle:`No history yet`,emptyDescription:`Completed, cancelled, and failed prints will appear here.`,showMore:`Show more`,showingCount:`Showing {{shown}} of {{total}}`},dragGhost:{multiCount:`{{count}} items`,batch:`{{name}} ({{count}} copy)`,batch_plural:`{{name}} ({{count}} copies)`},sections:{currentlyPrinting:`Currently Printing`,queued:`Queued`,history:`History`},status:{pending:`Pending`,waiting:`Waiting`,printing:`Printing`,paused:`Paused`,completed:`Completed`,failed:`Failed`,skipped:`Skipped`,cancelled:`Cancelled`},summary:{printing:`Printing`,queued:`Queued`,totalTime:`Total Queue Time`,totalWeight:`Total Queue Weight`,history:`History`},filter:{allPrinters:`All Printers`,unassigned:`Unassigned`,allStatus:`All Status`,allLocations:`All Locations`,any:`Any`},sort:{byPosition:`Sort by Position`,byName:`Sort by Name`,byPrinter:`Sort by Printer`,bySchedule:`Sort by Schedule`,byDate:`Sort by Date`,ascendingOldest:`Ascending (oldest first)`,descendingNewest:`Descending (newest first)`},badges:{staged:`Staged`,requiresPrevious:`Requires previous success`,autoPowerOff:`Auto power off`,gcodeInjection:`G-code`},empty:{title:`No prints scheduled`,description:`Schedule a print from the Archives page using the "Schedule" option in the context menu, or drag and drop files to get started.`},time:{etaIfStartedNow:`Completion time if this job started now`,whenFree:`When a printer is free`,overdue:`Overdue`,now:`Now`,lessThanMinute:`In less than a minute`,inMinutes:`In {{count}} min`,inHours:`In {{count}} hours`},actions:{startPrint:`Start Print`,stopPrint:`Stop Print`,requeue:`Re-queue`},bulkEdit:{title:`Edit {{count}} Item`,title_plural:`Edit {{count}} Items`,description:`Only changed settings will be applied to selected items.`,printer:`Printer`,noChange:`— No change —`,queueOptions:`Queue Options`,staged:`Staged (manual start)`,autoPowerOff:`Auto power off after print`,requirePrevious:`Require previous success`,gcodeInjection:`Inject G-code`,printOptions:`Print Options`,bedLevelling:`Bed levelling`,flowCalibration:`Flow calibration`,vibrationCalibration:`Vibration calibration`,layerInspection:`First layer inspection`,timelapse:`Timelapse`,useAms:`Use AMS`,nozzleOffsetCali:`Nozzle offset calibration`,applyChanges:`Apply Changes`,selectAll:`Select All`,deselectAll:`Deselect All`,selected:`{{count}} selected`,editSelected:`Edit Selected`,cancelSelected:`Cancel Selected`},confirm:{cancelTitle:`Cancel Scheduled Print`,cancelMessage:`Are you sure you want to cancel "{{name}}"?`,stopTitle:`Stop Print`,stopMessage:`Are you sure you want to stop the current print "{{name}}"? This will cancel the print job on the printer.`,removeTitle:`Remove from History`,removeMessage:`Are you sure you want to remove "{{name}}" from the queue history?`,clearHistoryTitle:`Clear History`,clearHistoryMessage:`Are you sure you want to remove all {{count}} item(s) from the history?`,cancelButton:`Cancel Print`,stopButton:`Stop Print`,thisPrint:`this print`,thisItem:`this item`},toast:{cancelled:`Queue item cancelled`,cancelFailed:`Failed to cancel item`,removed:`Queue item removed`,keptForOrder:`Cancelled instead of removed: this is the only run its batch order can re-queue this plate from`,historyKeptForOrders:`Kept {{kept}} that batch orders still need.`,removeFailed:`Failed to remove item`,stopped:`Print stopped`,stopFailed:`Failed to stop print`,released:`Print released to queue`,startFailed:`Failed to start print`,reorderFailed:`Failed to reorder queue`,historyCleared:`Cleared {{count}} history item(s)`,clearHistoryFailed:`Failed to clear history`,updateFailed:`Failed to update items`,bulkCancelled:`Cancelled {{count}} item(s)`,bulkCancelFailed:`Failed to cancel items`,batchCreated:`Batch "{{name}}" created`,batchCreateFailed:`Failed to create batch`,batchUngrouped:`Ungrouped {{count}} item(s)`,batchUngroupFailed:`Failed to ungroup batch`,resumedAfterFailure:`Resumed queue — {{restored}} job(s) restored to pending`,resumeAfterFailureFailed:`Failed to resume queue`},resumeAfterFailure:{banner:`{{printer}} is blocked by a previous-print failure — {{count}} job(s) skipped`,bannerHint:`Fix the printer issue, then resume to restore the skipped jobs and clear the gate.`,button:`Resume after failure`,confirmTitle:`Resume queue after failure?`,confirmMessage:`Restore {{count}} skipped job(s) on {{printer}} to pending and clear the previous-print gate. Make sure the printer is ready before continuing.`},timeline:{listView:`List`,timelineView:`Timeline`,unassigned:`Unassigned`,noData:`No scheduled prints for this day`,nothingCommitted:`No committed schedules in this window. Staged items, waiting items, and ASAP jobs on idle printers are not shown — set a scheduled time or release a staged item to see it here.`,allDoneBy:`All prints estimated done by {{time}}`,staged:`Staged`,filterAll:`Show All`,filterPrinting:`Printing`,filterQueued:`Queued`,time:{anyMoment:`any moment`,minutesLeft:`{{minutes}}m left`,hoursLeft:`{{hours}}h left`,hoursMinutesLeft:`{{hours}}h {{minutes}}m left`},day:{previous:`Previous day`,next:`Next day`,today:`Today`},window:{back12h:`Back 12 hours`,forward12h:`Forward 12 hours`,now:`Now`},printerColumnHeader:`Printer`},permissions:{noStopPrint:`You do not have permission to stop prints`,noStartPrint:`You do not have permission to start prints`,noEdit:`You do not have permission to edit this queue item`,noCancel:`You do not have permission to cancel this queue item`,noRequeue:`You do not have permission to re-queue items`,noRemove:`You do not have permission to remove this queue item`,noClearHistory:`You do not have permission to clear all history`,noEditItems:`You do not have permission to edit queue items`,noCancelItems:`You do not have permission to cancel queue items`}},stats:{title:`Statistics`,subtitle:`Drag widgets to rearrange. Click the eye icon to hide.`,overview:`Overview`,totalPrints:`Total Prints`,successRate:`Success Rate`,totalPrintTime:`Total Print Time`,printTime:`Print Time`,totalFilament:`Total Filament Used`,filamentUsed:`Filament Used`,filamentCost:`Filament Cost`,totalCost:`Total Cost`,energyUsed:`Energy Used`,energyCost:`Energy Cost`,energyWarmingUpTooltip:`Energy tracking is still collecting hourly snapshots. Date-range totals will become accurate once at least one snapshot exists before the selected range. Early values may undercount.`,averagePrintTime:`Average Print Time`,printsPerDay:`Prints per Day`,byPrinter:`By Printer`,printsByPrinter:`Prints by Printer`,byMaterial:`By Material`,byMonth:`By Month`,last7Days:`Last 7 Days`,last30Days:`Last 30 Days`,last90Days:`Last 90 Days`,allTime:`All Time`,quickStats:`Quick Stats`,printActivity:`Print Activity`,filamentTypes:`Filament Types`,filamentTrends:`Filament Trends`,failureAnalysis:`Failure Analysis`,timeAccuracy:`Time Accuracy`,successful:`Successful:`,failed:`Failed:`,cancelled:`Cancelled:`,perfectEstimate:`100% = perfect estimate`,noTimeAccuracyData:`No time accuracy data yet`,noFilamentData:`No filament data available`,noPrinterData:`No printer data available`,noPrintData:`No print data available`,noPrintDataLast30Days:`No print data in the last 30 days`,failureReasons:`Failure Reasons`,topFailureReasons:`Top Failure Reasons`,failedPrintsCount:`{{failed}} / {{total}} prints failed`,lastWeekRate:`Last week: {{rate}}%`,resetLayout:`Reset Layout`,recalculateCosts:`Recalculate Costs`,recalculateCostsHint:`Recalculate all archive costs using current filament prices`,exportStats:`Export Stats`,exportAsCsv:`Export as CSV`,exportAsExcel:`Export as Excel`,hiddenCount:`{{count}} Hidden`,exportDownloaded:`Export downloaded`,exportFailed:`Export failed`,layoutReset:`Layout reset`,recalculatedCosts:`Recalculated costs for {{count}} archives`,recalculateFailed:`Failed to recalculate costs`,loadingStats:`Loading statistics...`,noPermissionResetLayout:`You do not have permission to reset layout`,noPermissionRecalculate:`You do not have permission to recalculate costs`,noPrintDataInRange:`No print data in selected range`,periodFilament:`Period Filament`,periodCost:`Period Cost`,avgPerPrint:`Avg per Print`,usageOverTime:`Usage Over Time`,energyOverTime:`Energy Over Time`,filamentByWeight:`Weight`,printDuration:`Print Duration`,printerUtilization:`Printer Utilization`,filamentSuccess:`Success by Material`,printHabits:`Print Habits`,printTimeOfDay:`Print Time of Day`,colorDistribution:`Color Distribution`,noColorData:`No color data available`,records:`Records`,longestPrint:`Longest Print`,heaviestPrint:`Heaviest Print`,mostExpensivePrint:`Most Expensive`,busiestDay:`Busiest Day`,successStreak:`Success Streak`,streakPrint:`consecutive print`,streakPrints:`{{count}} consecutive prints`,printerStats:`Printer Stats`,hours:`hours`,avgPrints:`Avg. prints`,noArchiveData:`No print data available`,filamentByTime:`Time`,avgWeight:`Avg. weight`,avgTime:`Avg. time`,filamentByPrints:`Prints`,timeframe:{today:`Today`,"this-week":`This Week`,"this-month":`This Month`,"last-7":`Last 7 Days`,"last-30":`Last 30 Days`,"last-90":`Last 90 Days`,"this-year":`This Year`,"all-time":`All Time`,custom:`Custom Range`,from:`From`,to:`To`},allUsers:`All Users`,noUser:`No User (System)`,filterByUser:`Filter by User`},maintenance:{title:`Maintenance`,overview:`Overview`,allOk:`All maintenance up to date`,dueCount:`{{count}} item due`,dueCount_plural:`{{count}} items due`,warningCount:`{{count}} warning`,warningCount_plural:`{{count}} warnings`,totalPrintTime:`Total Print Time`,nextMaintenance:`Next Maintenance`,nothingDue:`Nothing due`,tasks:`Tasks`,lastPerformed:`Last performed`,interval:`Interval`,hoursRemaining:`{{hours}}h remaining`,hoursOverdue:`{{hours}}h overdue`,markDone:`Mark as Done`,performMaintenance:`Perform Maintenance`,history:`History`,noHistory:`No maintenance history`,editPrintHours:`Edit Print Hours`,currentHours:`Current Hours`,statusTab:`Status`,settingsTab:`Settings`,overdueCount:`{{count}} overdue`,dueSoonCount:`{{count}} due soon`,dueSoon:`Due soon`,allGood:`All good`,overdueBy:`Overdue by {{duration}}`,dueIn:`Due in {{duration}}`,timeLeft:`{{duration}} left`,day:`1 day`,days:`{{count}} days`,week:`1 week`,weeks:`{{count}} weeks`,month:`1 month`,months:`{{count}} months`,year:`1 year`,maintenanceTypes:`Maintenance Types`,maintenanceTypesDescription:`System types and your custom maintenance tasks`,addCustomType:`Add Custom Type`,restoreDefaults:`Restore Default Tasks`,intervalType:`Interval Type`,intervalValue:`Interval ({{type}})`,icon:`Icon`,documentationLink:`Documentation Link (optional)`,assignToPrinters:`Assign to Printers`,selectAtLeastOnePrinter:`Select at least one printer`,addType:`Add Type`,custom:`Custom`,printHours:`Print Hours`,calendarDays:`Calendar Days`,exampleName:`e.g., Replace HEPA Filter`,viewDocumentation:`View documentation`,timeBasedInterval:`Time-based interval`,intervalOverrides:`Interval Overrides`,intervalOverridesDescription:`Customize intervals for specific printers`,assignedToPrinters:`Assigned to printers:`,noPrintersAssigned:`No printers assigned`,addPrinterShort:`Add:`,printersAssignedClick:`{{count}} printer(s) assigned - click to manage`,removeFromPrinter:`Remove from this printer`,types:{lubricateCarbonRods:`Lubricate Carbon Rods`,lubricateRails:`Lubricate Linear Rails`,cleanNozzle:`Clean Nozzle/Hotend`,checkBelts:`Check Belt Tension`,cleanBuildPlate:`Clean Build Plate`,checkExtruder:`Check Extruder Gears`,checkCooling:`Check Cooling Fans`,generalInspection:`General Inspection`,cleanCarbonRods:`Clean Carbon Rods`,lubricateSteelRods:`Lubricate Steel Rods`,cleanSteelRods:`Clean Steel Rods`,cleanLinearRails:`Clean Linear Rails`,checkPtfeTube:`Check PTFE Tube`,replaceHepaFilter:`Replace HEPA Filter`,replaceCarbonFilter:`Replace Carbon Filter`,lubricateLeftNozzleRail:`Lubricate Left Nozzle Rail`},maintenanceComplete:`Maintenance marked as complete`,typeUpdated:`Maintenance type updated`,typeDeleted:`Maintenance type deleted`,defaultsRestored:`Restored {{count}} default task(s)`,printHoursUpdated:`Print hours updated`,printerAssigned:`Printer assigned`,printerRemoved:`Printer removed`,deleteTypeConfirm:`Delete "{{name}}"?`,deleteSystemTypeTitle:`Delete default maintenance task?`,deleteSystemTypeMessage:`Are you sure you want to delete the default maintenance task "{{name}}"?`,noPermissionUpdate:`You do not have permission to update maintenance items`,noPermissionPerform:`You do not have permission to perform maintenance`,noPermissionEditTypes:`You do not have permission to edit maintenance types`,noPermissionDeleteTypes:`You do not have permission to delete maintenance types`,noPermissionEditHours:`You do not have permission to edit print hours`,noPermissionRemovePrinter:`You do not have permission to remove printer assignments`,noPermissionAssignPrinter:`You do not have permission to assign printers`,noPermissionEditIntervals:`You do not have permission to edit intervals`,configureSettings:`Configure maintenance types and intervals`},settings:{sliceEngine:`Slice engine`,sliceEngineSidecar:`Server sidecar`,sliceEngineSidecarHint:`Slicing runs on the server, in the slicer sidecar container.`,sliceEngineBrowser:`In browser`,sliceEngineBrowserHint:`Slicing runs on this device, with no server involved.`,title:`Settings`,general:`General`,tabs:{general:`General`,smartPlugs:`Smart Plugs`,sensors:`Sensors`,notifications:`Notifications`,queue:`Workflow`,queueDispatch:`Queue & Dispatch`,queuePipelines:`Pipelines`,filament:`Filament`,network:`Network`,apiKeys:`API Keys`,virtualPrinter:`Virtual Printer`,spoolbuddy:`SpoolBuddy`,failureDetection:`Failure Detection`,users:`Authentication`,backup:`Backup`,emailAuth:`Email Authentication`,ldap:`LDAP`,twoFa:`Two-Factor Auth`,oidc:`SSO / OIDC`,security:`Security`},spoolbuddy:{infoTitle:`SpoolBuddy devices`,infoBody:`SpoolBuddy kiosks register themselves automatically via heartbeat. Unregister a device here if it is no longer in use or if a stale duplicate was left behind by a daemon crash.`,duplicatesTitle:`{{count}} devices registered`,duplicatesBody:`Only the first registered device is used by the kiosk UI. If one of these is a stale duplicate from a crash, unregister it — an online device will re-register itself on its next heartbeat.`,empty:`No SpoolBuddy devices registered yet.`,online:`Online`,offline:`Offline`,unregister:`Unregister`,unregisterSuccess:`Device unregistered`,unregisterError:`Failed to unregister device`,confirmTitle:`Unregister SpoolBuddy device?`,confirmBody:`This will remove "{{hostname}}" ({{deviceId}}) from the database. If the device is online, it will re-register itself on its next heartbeat.`,ipAddress:`IP address`,firmware:`Firmware`,lastSeen:`Last seen`,daemonUptime:`Daemon uptime`,systemUptime:`System uptime`,never:`never`,nfc:`NFC`,scale:`Scale`,cpuTemp:`CPU temp`,cpuLoad:`CPU load`,memory:`Memory`,disk:`Disk`,update:`Update`,updateConfirmTitle:`Update Spoolbuddy daemon?`,updateConfirmBody:`Trigger a software update on "{{hostname}}"? The daemon will restart once the update is applied.`,restartBrowser:`Restart Browser`,restartBrowserConfirmTitle:`Restart kiosk browser?`,restartBrowserConfirmBody:`Restart the kiosk browser on "{{hostname}}"? The display will blank briefly.`,restartDaemon:`Restart Daemon`,restartDaemonConfirmTitle:`Restart Spoolbuddy daemon?`,restartDaemonConfirmBody:`Restart the Spoolbuddy daemon on "{{hostname}}"? The device will go offline for a few seconds.`,reboot:`Reboot`,rebootConfirmTitle:`Reboot device?`,rebootConfirmBody:`Reboot "{{hostname}}"? The device will be offline for around a minute.`,shutdown:`Shutdown`,shutdownConfirmTitle:`Shutdown device?`,shutdownConfirmBody:`Shutdown "{{hostname}}"? You will need physical access to power it back on.`,commandConfirm:`Confirm`,commandQueued:`Command queued`,commandError:`Failed to send command`},ldap:{title:`LDAP Authentication`,enabledDesc:`LDAP authentication is enabled`,disabledDesc:`LDAP authentication is disabled`,disabledHint:`Configure and save LDAP settings below, then enable.`,enabled:`LDAP authentication enabled`,disabled:`LDAP authentication disabled`,feature1:`Users can login with LDAP credentials`,feature2:`Local admin account remains as fallback`,feature3:`LDAP groups are mapped to BamBuddy groups on login`,serverConfig:`LDAP Server Configuration`,serverUrl:`Server URL`,serverUrlHint:`Use ldaps:// for SSL or ldap:// with StartTLS`,security:`Security`,securityHint:`StartTLS upgrades a plain connection to TLS. LDAPS uses TLS from the start.`,bindDn:`Bind DN (Service Account)`,bindPassword:`Bind Password`,searchBase:`Search Base DN`,userFilter:`User Search Filter`,userFilterHint:`{username} is replaced with the login username. Use (uid={username}) for OpenLDAP.`,advanced:`Advanced`,autoProvision:`Auto-provision users`,autoProvisionHint:`Automatically create a BamBuddy account on first LDAP login`,defaultGroup:`Default group`,defaultGroupNone:`— None (no fallback) —`,defaultGroupHint:`Fallback group assigned when an LDAP user authenticates but is not listed in any mapped LDAP group. Leave empty to leave unmapped users without permissions.`,groupMapping:`Group Mapping (JSON)`,groupMappingHint:`Map LDAP group DNs to BamBuddy groups. Available groups: `,testConnection:`Test Connection`,settingsSaved:`LDAP settings saved`,errors:{serverRequired:`LDAP server URL is required`,searchBaseRequired:`Search base DN is required`,enableAuthFirst:`Enable authentication first`,configureLdapFirst:`Save LDAP settings first`}},email:{smtpSettings:`SMTP Configuration`,smtpHost:`SMTP Server`,smtpPort:`SMTP Port`,security:`Security`,authentication:`Authentication`,username:`Username`,password:`Password`,fromEmail:`From Email`,fromName:`From Name`,testConnection:`Test SMTP Connection`,testRecipient:`Test Recipient Email`,sendTest:`Send Test Email`,sending:`Sending...`,save:`Save Settings`,saving:`Saving...`,advancedAuth:`Advanced Authentication`,advancedAuthEnabled:`Advanced Authentication is enabled`,advancedAuthEnabledDesc:`Email-based user management features are active. New users will receive auto-generated passwords via email, and users can reset their passwords through the forgot password feature.`,advancedAuthDisabled:`Advanced Authentication is disabled`,advancedAuthDisabledDesc:`Enable advanced authentication to activate email-based features for user management.`,enable:`Enable`,disable:`Disable`,feature1:`Passwords are auto-generated and emailed to new users`,feature2:`Users can login with username or email`,feature3:`Forgot password feature is available`,feature4:`Admins can reset user passwords via email`,errors:{requiredFields:`Please fill in all required fields`,usernameRequired:`Username is required when authentication is enabled`,enterTestEmail:`Please enter a test email address`,smtpServerAndEmail:`Please fill in SMTP Server and From Email before testing`,usernamePasswordRequired:`Username and Password are required when authentication is enabled`,configureSmtpFirst:`Please configure and test SMTP settings first`,enableAuthFirst:`Please enable authentication first to use email-based features.`},success:{settingsSaved:`SMTP settings saved successfully`},securityOptions:{starttls:`STARTTLS (Port 587)`,ssl:`SSL/TLS (Port 465)`,none:`None (Port 25)`},authOptions:{enabled:`Enabled`,disabled:`Disabled`}},appearance:`Appearance`,notifications:`Notifications`,smartPlugs:`Smart Plugs`,spoolman:`Spoolman`,updates:`Updates`,language:`Language`,languageDescription:`Select your preferred language`,theme:`Theme`,themeLight:`Light`,themeDark:`Dark`,themeSystem:`System`,defaultView:`Default View`,defaultViewDescription:`Page to show when opening the app`,checkForUpdates:`Check for Updates`,autoUpdate:`Auto Update`,currentVersion:`Current Version`,latestVersion:`Latest Version`,upToDate:`You are up to date`,updateAvailable:`Update available`,notificationLanguage:`Notification Language`,notificationLanguageDescription:`Language for push notifications`,bedCooledThreshold:`Bed Cooled Threshold`,bedCooledThresholdDescription:`Temperature below which the bed is considered cooled after a print`,userNotificationsEnabled:`User Notifications`,userNotificationsEnabledDescription:`Enable the user notifications menu and email notifications for print job events. Requires Advanced Authentication.`,userNotificationsDisabledHint:`Enable Advanced Authentication to use user notifications.`,notificationProviders:`Notification Providers`,addProvider:`Add Provider`,editProvider:`Edit Provider`,providerType:`Provider Type`,testNotification:`Test Notification`,testSuccess:`Test notification sent successfully`,testFailed:`Failed to send test notification`,quietHours:`Quiet Hours`,quietHoursDescription:`Do not disturb during these hours`,quietHoursStart:`Start`,quietHoursEnd:`End`,events:{title:`Notification Events`,printStart:`Print Started`,printComplete:`Print Completed`,printFailed:`Print Failed`,printStopped:`Print Stopped`,printProgress:`Progress Milestones`,printProgressDescription:`Notify at 25%, 50%, 75%`,printerOffline:`Printer Offline`,printerError:`Printer Error`,filamentLow:`Low Filament`,maintenanceDue:`Maintenance Due`,maintenanceDueDescription:`Notify when maintenance is needed`},smartPlug:{title:`Smart Plugs`,add:`Add Smart Plug`,edit:`Edit Smart Plug`,name:`Name`,ipAddress:`IP Address`,linkedPrinter:`Linked Printer`,autoOn:`Auto Power On`,autoOnDescription:`Turn on when print starts`,autoOff:`Auto Power Off`,autoOffDescription:`Turn off after print completes`,offDelay:`Off Delay`,offDelayMinutes:`Minutes after print`,offDelayTemp:`When nozzle below temperature`,currentState:`Current State`,turnOn:`Turn On`,turnOff:`Turn Off`},filamentTracking:`Filament Tracking`,filamentTrackingDesc:`Choose how to track your filament spools. You can use the built-in inventory or connect an external Spoolman server.`,autoAddUnknownRfid:`Auto-add unknown RFID spools`,autoAddUnknownRfidDesc:`Automatically create an inventory entry when a spool with an unknown RFID tag is detected. Turn off if you pre-register new spools manually to avoid duplicates.`,filamentChecks:`Filament checks`,disableFilamentWarnings:`Disable filament warnings`,disableFilamentWarningsDesc:`Don't show warnings about insufficient filament when printing or queueing`,preferLowestFilament:`Prefer lowest remaining filament`,preferLowestFilamentDesc:`When multiple spools match, use the one with the least filament remaining`,preferLowestFilamentBackupNote:`Only takes effect when AMS Filament Backup is enabled on the printer — otherwise the printer cannot switch to a second spool when the picked one runs out.`,trackingModeBuiltIn:`Built-in Inventory`,trackingModeBuiltInDesc:`RFID auto-matching and usage tracking included`,trackingModeSpoolmanDesc:`External filament management server`,builtInFeatureRfid:`Automatically detects Bambu Lab RFID spools in AMS`,builtInFeatureUsage:`Tracks filament consumption per print`,builtInFeatureCatalog:`Manage spools, colors, and K-factor profiles`,builtInFeatureThirdParty:`Third-party spools can be assigned to inventory spools`,amsSyncButton:`Sync Weights from AMS`,amsSyncTitle:`Sync Spool Weights from AMS`,amsSyncMessage:`This will overwrite all inventory spool weights with the current AMS remain% values from connected printers. Use this to recover from corrupted weight data. Printers must be online.`,amsSyncing:`Syncing...`,amsSyncSuccess:`{{synced}} spool(s) synced, {{skipped}} skipped`,amsSyncError:`Failed to sync weights from AMS`,spoolmanAmsSyncButton:`Sync Spoolman Weights from AMS`,spoolmanAmsSyncTitle:`Sync Spoolman Spool Weights from AMS`,spoolmanAmsSyncMessage:`This will update all Spoolman spool weights based on the current AMS remain% values from connected printers. Printers must be online.`,spoolmanAmsSyncing:`Syncing...`,spoolmanAmsSyncSuccess:`{{synced}} spool(s) synced, {{skipped}} skipped`,spoolmanAmsSyncError:`Failed to sync Spoolman weights from AMS`,spoolmanAmsSyncErrorUnreachable:`Failed to sync Spoolman weights (Spoolman unreachable)`,spoolmanAmsSyncErrorNotConfigured:`Failed to sync Spoolman weights (Spoolman not configured)`,spoolmanNotConfigured:`Spoolman not configured`,spoolmanFilamentCatalogTitle:`Spoolman Filament Catalog`,spoolmanFilamentCatalogDesc:`Filament names and tare weights from your Spoolman instance. Name and spool weight are editable here; all other properties are managed directly in Spoolman.`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`URL of your Spoolman server (e.g., http://localhost:7912)`,spoolmanConnected:`Connected`,spoolmanDisconnected:`Disconnected`,status:`Status`,connect:`Connect`,disconnect:`Disconnect`,howSyncWorks:`How Sync Works`,syncInfoRfidOnly:`Only official Bambu Lab spools with RFID are synced`,syncInfoAutoCreate:`New spools are auto-created in Spoolman on first sync`,syncInfoThirdPartySkipped:`Non-Bambu Lab spools (third-party, refilled) are skipped`,linkingExistingSpools:`Linking Existing Spools`,linkingExistingSpoolsDesc:`To link existing Spoolman spools to your AMS, hover over an AMS slot and click "Link to Spoolman".`,syncMode:`Sync Mode`,syncModeAuto:`Automatic`,syncModeManual:`Manual Only`,syncModeAutoDesc:`AMS data syncs automatically when changes are detected`,syncModeManualDesc:`Only sync when manually triggered`,syncAmsData:`Sync AMS Data`,syncAmsDataDesc:`Manually sync printer AMS data to Spoolman`,allPrinters:`All Printers`,noDefaultPrinter:`No default (ask each time)`,sidebarOrder:`Sidebar order`,saveThumbnails:`Save thumbnails`,captureFinishPhoto:`Capture finish photo`,noPrintersConfigured:`No printers configured`,archiveMode:{always:`Always create archive entry`,never:`Never create archive entry`,ask:`Ask each time`},checkForUpdatesLabel:`Check for updates`,checkPrinterFirmware:`Check printer firmware`,includeBetaUpdates:`Include beta versions`,includeBetaUpdatesDesc:`Notify about beta and prerelease versions when checking for updates`,localLogin:{disable:`Disable local username/password login`,disableHint:`When enabled, only SSO providers can sign in. LDAP is unaffected. Set BAMBUDDY_LOCAL_LOGIN=true on the server to keep a recovery path.`},enableRetry:`Enable retry`,homeAssistantDescription:`Control smart plugs via Home Assistant`,environmentManagedLabel:`(Environment Managed)`,autoEnabledViaEnv:`Automatically enabled via environment variables`,urlFromEnvReadOnly:`Value set by HA_URL environment variable (read-only)`,tokenFromEnvReadOnly:`Value set by HA_TOKEN environment variable (read-only)`,mqttConnectedTo:`Connected to`,prometheusDescription:`Expose printer data in Prometheus format`,noSmartPlugsTitle:`No smart plugs configured`,noSmartPlugsDescription:`Add a Tasmota-based smart plug to track energy usage and automate power control.`,noProvidersTitle:`No providers configured`,noProvidersDescription:`Add a provider to receive alerts.`,noTemplatesAvailable:`No templates available. Restart the backend to seed default templates.`,apiPermissionView:`View printer status and queue`,apiPermissionEdit:`Add and remove items from print queue`,apiKeysEmptyTitle:`No API keys`,apiKeysEmptyDescription:`Create an API key to integrate with external services.`,noUsersFound:`No users found`,noGroupsFound:`No groups found`,noGroupsAvailable:`No groups available`,passwordsDoNotMatch:`Passwords do not match`,systemGroupWarning:`System group names cannot be changed`,authDisabledTitle:`Authentication is Disabled`,authDisabledFeature1:`Require login to access the system`,authDisabledFeature2:`Create multiple users with group-based permissions`,authDisabledFeature3:`Control access with 50+ granular permissions`,userHasCreated:`This user has created:`,userItemsQuestion:`What would you like to do with these items?`,deleteUserConfirm:`Are you sure you want to delete this user?`,actionCannotBeUndone:`This action cannot be undone.`,addFirstSmartPlug:`Add Your First Smart Plug`,providers:`Providers`,log:`Log`,testAll:`Test All`,testResults:`Test Results`,testPassedCount:`{{count}} passed`,testFailedCount:`{{count}} failed`,messageTemplates:`Message Templates`,messageTemplatesDescription:`Customize notification messages for each event.`,apiKeys:`API Keys`,apiKeysDescription:`Create API keys for external integrations and webhooks.`,createKey:`Create Key`,apiKeyCreated:`API Key Created Successfully`,apiKeyCopyWarning:`Copy this key now - it won't be shown again!`,useInApiBrowser:`Use in API Browser`,apiKeyQrButton:`QR code`,apiKeyQrTitle:`Scan to configure`,apiKeyQrCaption:`Scan with your mobile app to add this server and API key.`,apiKeyQrWarning:`Contains your secret API key — don't share or screenshot it where others can see.`,createNewApiKey:`Create New API Key`,keyName:`Key Name`,keyNamePlaceholder:`e.g., Home Assistant, OctoPrint`,readStatus:`Read Status`,readStatusDescription:`View printer status, queue, library, archives, and slicer pipelines`,manageQueue:`Manage Queue`,manageQueueDescription:`Add and remove items from print queue. With Manage Library, run slicer pipelines`,controlPrinter:`Control Printer`,controlPrinterDescription:`Pause, resume, and stop prints`,manageLibrary:`Manage Library`,manageLibraryDescription:`Upload, rename, delete, and slice library files; import models from MakerWorld. With Manage Queue, run slicer pipelines`,manageInventory:`Manage Inventory`,manageInventoryDescription:`Create, update, and delete spools and inventory records. Required for SpoolBuddy kiosks (NFC scan, scale readings, kiosk system commands).`,manageMaintenance:`Manage Maintenance`,manageMaintenanceDescription:`Log completed maintenance, reset counters, edit intervals, and manage the maintenance-type catalog. Suited to Home Assistant automations that record "I cleaned the nozzle" without granting broader printer control.`,manageArchives:`Manage Archives`,manageArchivesDescription:`Edit and delete print archives, including removing old prints and their contribution to statistics. Suited to automations that prune the print history.`,manageProjects:`Manage Projects`,manageProjectsDescription:`Create, update, and delete projects, and add archives to them. Suited to automations that organize prints into projects.`,libraryBadge:`Library`,inventoryBadge:`Inventory`,maintenanceBadge:`Maintenance`,archivesBadge:`Archives`,projectsBadge:`Projects`,cloudAccess:`Allow cloud access`,cloudAccessDescription:`Read Bambu Cloud presets and filaments on your behalf. Requires you to be signed into Bambu Cloud.`,cloudBadge:`Cloud`,updateEnergyCost:`Update electricity price`,updateEnergyCostDescription:`Allow this key to POST a new per-kWh electricity price to /settings/electricity-price. Useful for Home Assistant dynamic-tariff automations (Tibber, Octopus, etc.). This is the only settings field writable via API key.`,energyCostBadge:`Energy`,legacyKey:`Legacy`,legacyKeyTooltip:`Created before per-user ownership; recreate to use cloud access`,unnamedKey:`Unnamed Key`,lastUsed:`Last used`,read:`Read`,control:`Control`,createFirstKey:`Create Your First Key`,webhookEndpoints:`Webhook Endpoints`,webhookApiKeyHint:`Use your API key in the X-API-Key header.`,webhook:{getAllStatus:`Get all printer status`,getSpecificStatus:`Get specific printer status`,addToQueue:`Add to print queue`,pausePrint:`Pause print`,resumePrint:`Resume print`,stopPrint:`Stop print`},apiBrowser:`API Browser`,apiBrowserDescription:`Explore and test all available API endpoints.`,apiKeyForTesting:`API Key for Testing`,apiKeyPlaceholder:`Paste your API key here to test authenticated endpoints...`,apiKeyHint:`This key will be sent as X-API-Key header with requests.`,deleteApiKeyTitle:`Delete API Key`,deleteApiKeyMessage:`Are you sure you want to delete this API key? Any integrations using this key will stop working.`,deleteKey:`Delete Key`,amsDisplayThresholds:`AMS Display Thresholds`,amsThresholdsDescription:`Configure color thresholds for AMS humidity and temperature indicators.`,humidity:`Humidity`,goodGreen:`Good (green)`,fairOrange:`Fair (orange)`,aboveFairBad:`Above fair threshold shows as red (bad)`,fairAlsoDryingThreshold:`This threshold is also used to trigger auto-drying when enabled`,fairBelowDryingFloor:`Auto-drying cannot reach this value: an AMS reads {{floor}}% or more while its heater runs, so every cycle would end and restart immediately. Raise it above {{floor}}% if auto-drying is on.`,temperature:`Temperature`,goodBlue:`Good (blue)`,aboveFairHot:`Above fair threshold shows as red (hot)`,tempAlarmThreshold:`Alarm above`,tempAlarmSeparateFromBand:`Only the alarm threshold sends notifications — Good and Fair colour the display. Leave it empty to alarm at the fair threshold, as before.`,tempAlarmMustBePositive:`A threshold of 0 or less is ignored — the alarm falls back to the fair threshold.`,historyRetention:`History Retention`,keepSensorHistory:`Keep sensor history for`,historyRetentionDescription:`Older humidity and temperature data will be automatically deleted`,defaultPrintOptions:`Default Print Options`,defaultPrintOptionsDescription:`Set default values for print options when starting new prints. These can be overridden per print in the print dialog.`,defaultBedLevelling:`Bed Levelling`,defaultBedLevellingDesc:`Auto-level bed before print`,defaultFlowCali:`Flow Calibration`,defaultFlowCaliDesc:`Calibrate extrusion flow`,defaultVibrationCali:`Vibration Calibration`,defaultVibrationCaliDesc:`Reduce ringing artifacts`,defaultLayerInspect:`First Layer Inspection`,defaultLayerInspectDesc:`AI inspection of first layer`,defaultTimelapse:`Timelapse`,defaultTimelapseDesc:`Record timelapse video`,defaultNozzleOffsetCali:`Nozzle Offset Calibration`,defaultNozzleOffsetCaliDesc:`Calibrate nozzle offsets between extruders`,tempFanPresetsTitle:`Temperature & Fan Presets`,tempFanPresetsDescription:`Customize the quick-select values shown in printer-card temperature and fan-speed popovers. The Off button is always shown.`,tempFanPresetsNozzle:`Nozzle temperature`,tempFanPresetsBed:`Bed temperature`,tempFanPresetsChamber:`Chamber temperature`,tempFanPresetsFan:`Fan speed`,tempFanPresetsReset:`Reset to defaults`,concurrentUploadsTitle:`Concurrent Uploads`,concurrentUploadsDescription:`How many printers the queue may send files to at the same time. Printers receive files slowly (a large print can take several minutes), and each one waits its turn — so on a bigger fleet, raising this is what stops the last printer in a batch from waiting out every transfer before it. Lower it if your network or Bambuddy host struggles with parallel transfers.`,concurrentUploadsLabel:`Printers uploaded to at once`,concurrentUploadsHelp:`1 sends to one printer at a time (the old behaviour). Default is 4.`,staggeredStart:`Staggered Start`,staggeredStartDescription:`Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.`,preheatTitle:`Preheat & Heat Soak`,preheatDescription:`Heat the bed (and chamber, if supported) and hold at temperature before each queued print starts. Helpful for engineering filaments (PA, ABS) on printers without an active chamber heater — the bed warms the chamber by radiation while the soak timer runs. The bed target is read from the print file; chamber behaviour depends on printer model.`,preheatEnabled:`Enable preheat & soak`,preheatEnabledDesc:`When off, queued prints dispatch immediately. Each queue item can override per print.`,preheatFilamentTargetsLabel:`Per-filament chamber target (°C)`,preheatFilamentTargetsHint:`Bambuddy picks the highest target across the loaded AMS slots. A print whose slots all derive 0 — PLA, PETG, TPU, PVA — skips preheat entirely and starts immediately.`,preheatFilamentTargetsReset:`Reset to defaults`,preheatFilamentTargetsDefaultRow:`Other / unmapped`,preheatMaxWait:`Max wait (seconds)`,preheatMaxWaitHelp:`Cap on the chamber warm-up phase before falling through.`,preheatSoak:`Soak (seconds)`,preheatSoakHelp:`Hold time after target reached or max-wait elapsed.`,preheatHardwareTitle:`Per-printer behaviour:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E actively heat the chamber via M141. X1C/P2S read chamber temp but rely on bed-radiation heating. P1S/P1P/A1/A1 Mini have no chamber sensor — only the soak timer applies.`,preheatPerItemDesc:`Heat the bed and chamber before this print starts. Defaults to the global Settings → Workflow toggle.`,preheatOverride_inherit:`Inherit`,preheatOverride_on:`On`,preheatOverride_off:`Off`,calibrationMode_off:`Off`,calibrationMode_on:`On`,calibrationMode_auto:`Auto`,preheatTargetOverride:`Chamber target override (°C, blank = filament default)`,preheatTargetOverrideHelp:`0 heats the bed and runs the soak without the chamber. Leave blank and a print with no chamber requirement skips preheat entirely.`,plateClear:`Plate-Clear Confirmation`,requirePlateClear:`Require plate-clear confirmation`,requirePlateClearDescription:`When enabled, the scheduler waits for per-printer plate-clear confirmation before starting queued prints on printers with finished jobs. Disabling this also hides the plate status badge and the "Mark plate as cleared" button on printer cards.`,keepBedWarm:`Keep bed warm between prints`,keepBedWarmDesc:`While awaiting plate-clear, hold the bed at the keep-warm temperature below so the chamber stays hot — or at the next print's own bed temperature when that is higher. Only applies when the next print needs chamber heating (ASA, ABS, PA, PC etc.). Requires plate-clear confirmation to be enabled.`,keepWarmBedTemp:`Keep-warm bed temperature (°C)`,keepWarmBedTempHelp:`Used whenever the bed's job is to heat the chamber — the keep-warm hold, and preheat when the print file carries no bed temperature. A higher bed temperature from the print file always wins.`,keepWarmMaxMinutes:`Stop keeping warm after (minutes)`,keepWarmMaxMinutesHelp:`If the plate is not cleared within this time, the heaters are switched off rather than held indefinitely.`,gcodeInjection:`G-code Injection`,gcodeInjectionDescription:`Configure custom G-code to inject at the start and/or end of prints for auto-print systems like Farmloop, SwapMod, AutoClear, and Printflow 3D. Snippets are configured per printer model and applied when "Inject G-code" is enabled on a queue item.`,gcodeInjectionNoPrinters:`No printers found. Add printers to configure G-code snippets.`,gcodeStartLabel:`Start G-code`,gcodeEndLabel:`End G-code`,gcodeStartPlaceholder:`G-code prepended before the print starts...`,gcodeEndPlaceholder:`G-code appended after the print ends...`,staggerGroupSize:`Group size`,staggerGroupSizeHelp:`Printers to start simultaneously per group`,staggerInterval:`Interval (minutes)`,staggerIntervalHelp:`Delay between each group starting`,queueDrying:`Queue Auto-Drying`,queueDryingDescription:`Automatically dry AMS filament when printer is idle between queued prints. Uses humidity threshold above to trigger drying.`,queueDryingEnabled:`Enable auto-drying`,queueDryingEnabledDescription:`Start AMS drying automatically when printer is idle and humidity is above threshold`,queueDryingBlock:`Wait for drying to complete`,queueDryingBlockDescription:`Block the print queue until drying finishes. When off, prints take priority over drying.`,ambientDryingEnabled:`Ambient drying`,ambientDryingEnabledDescription:`Automatically dry filament on idle printers when humidity exceeds threshold, even without queued prints.`,printDryingEnabled:`Continue drying while printing`,printDryingEnabledDescription:`Allow auto-drying to keep running during a print on supported hardware (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L on recent firmware). Drying temperature is automatically capped 5°C below the idle preset to protect spools.`,dryingPresets:`Drying Presets`,dryingPresetsDescription:`Temperature and duration per filament type. AMS 2 Pro uses lower temps, AMS-HT supports higher temps.`,dryingFilament:`Filament`,humidityThresholds:`Humidity Thresholds`,humidityThresholdsDescription:`Per-filament humidity trigger for auto-drying and alarms. Mixed loads in one AMS use the lowest threshold.`,humidityThresholdCol:`Threshold`,humidityThresholdDefault:`Default (unknown types)`,printModal:`Print Modal`,expandCustomMapping:`Expand custom mapping by default`,expandCustomMappingDescription:`When printing to multiple printers, show per-printer AMS mapping expanded`,authentication:`Authentication`,authEnabledDescription:`Your instance is secured with user authentication`,authDisabledDescription:`Enable to require login and manage user access`,authDisabledMessage:`Enable authentication to create user accounts, manage permissions, and secure your Bambuddy instance.`,enableAuthentication:`Enable Authentication`,currentUser:`Current User`,changePassword:`Change Password`,admin:`Admin`,users:`Users`,addUser:`Add User`,groups:`Groups`,addGroup:`Add Group`,system:`System`,noDescription:`No description`,userCount:`{{count}} users`,permissionCount:`{{count}} permissions`,createUser:`Create User`,username:`Username`,enterUsername:`Enter username`,password:`Password`,enterPassword:`Enter password`,passwordRequirements:`At least 8 characters, with one uppercase, one lowercase, one digit, and one special character.`,confirmPassword:`Confirm Password`,confirmPasswordPlaceholder:`Confirm password`,viewReleaseOnGitHub:`View release on GitHub`,turnAllPlugsOn:`Turn all plugs on`,turnAllPlugsOff:`Turn all plugs off`,clearNotificationLogs:`Clear Notification Logs`,clearLogsMessage:`This will permanently delete all notification logs older than 30 days. This action cannot be undone.`,clearLogs:`Clear Logs`,resetUiPreferences:`Reset UI Preferences`,resetUiPreferencesMessage:`This will reset all UI preferences to defaults: sidebar order, theme, dashboard layout, view modes, and sorting preferences. Your printers, archives, and server settings will NOT be affected. The page will reload after clearing.`,resetPreferences:`Reset Preferences`,deleteGroupTitle:`Delete Group`,deleteGroupMessage:`Are you sure you want to delete this group? Users in this group will lose these permissions.`,deleteGroup:`Delete Group`,disableAuthenticationTitle:`Disable Authentication`,disableAuthenticationMessage:`Are you sure you want to disable authentication? This will make your Bambuddy instance accessible without login. All users will remain in the database but authentication will be disabled.`,disableAuthentication:`Disable Authentication`,configureBambuddy:`Configure Bambuddy`,systemDefault:`System Default`,archiveSettings:`Archive Settings`,newWindow:`New Window`,embeddedOverlay:`Embedded Overlay`,preferredSlicer:`Preferred Slicer`,preferredSlicerDescription:`Slicer used for in-app slicing via the API sidecar`,openInSlicerLabel:`Open in Slicer`,openInSlicerInherit:`Same as API slicer`,openInSlicerDescription:`Desktop slicer used by the 'Open in Slicer' button. Leave on 'Same as API slicer' to inherit, or pick a different slicer to use locally.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.`,useSlicerApi:`Use Slicer API`,useSlicerApiDescription:`When on, "Slice" actions open the in-app slicer modal and call the slicer-API sidecar. When off (default), they hand off to the desktop slicer via URI scheme.`,slicerCard:`Slicer`,orcaslicerApiUrl:`OrcaSlicer sidecar URL`,bambuStudioApiUrl:`Bambu Studio sidecar URL`,slicerStallTimeout:`Slicer stall timeout (minutes)`,slicerStallTimeoutDescription:`Give up on a slice after this long with no progress from the sidecar. Heavy models that keep reporting progress are never cut off, however long they take. Sidecars that do not report progress use this as a total time limit instead.`,slicerApiUrlDescription:`URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.`,externalCameras:`External Cameras`,costTracking:`Cost Tracking`,billingEnabled:`Enable Billing`,billingEnabledDescription:`Charge users for prints and enable finance features`,printerKillSwitch:`Unauthorized print kill switch`,printerKillSwitchDescription:`Immediately stop prints that start without authorization.`,financeBudgetReset:`Finance Monthly Budget Reset`,financeBudgetResetDay:`Reset Day`,financeBudgetResetDayHelp:`For short months, reset uses the last day of the month.`,financeBudgetResetTimezone:`Reset timezone`,financeBudgetResetTimezoneHelp:`Budget window start is calculated in this timezone.")`,rebuildLedger:`Rebuild wallet ledger`,rebuildLedgerStarted:`Ledger rebuild started`,rebuildLedgerConfirmTitle:`Rebuild wallet ledger?`,rebuildLedgerConfirmMessage:`This will rebuild the wallet ledger to repair historical balance values. Run this only if you know what you are doing.`,rebuildLedgerInProgress:`Starting rebuild...`,printsOnly:`Prints Only`,totalConsumption:`Total Consumption`,dataManagement:`Data Management`,storageUsage:`Storage Usage`,storageUsageDescription:`Breakdown of data usage by category`,storageUsageTotal:`Total`,storageUsageErrors:`Errors`,storageUsageOtherBreakdown:`Other (includes static assets, scripts, and configuration files)`,storageUsageSystem:`System`,storageUsageData:`Data`,storageUsageUnavailable:`Storage usage information unavailable`,clearNotificationLogsDescription:`Delete notification logs older than 30 days`,resetUiPreferencesDescription:`Reset sidebar order, theme, view modes, and layout preferences. Printers, archives, and settings are not affected.`,enableHomeAssistant:`Enable Home Assistant`,enableMqtt:`Enable MQTT`,useTls:`Use TLS`,enableMetricsEndpoint:`Enable Metrics Endpoint`,availableMetrics:`Available Metrics`,editUser:`Edit User`,deleteUserTitle:`Delete User`,groupName:`Group Name`,leaveEmptyForAnonymous:`Leave empty for anonymous`,leaveEmptyForNoAuth:`Leave empty for no authentication`,enterNewPassword:`Enter new password`,confirmNewPassword:`Confirm new password`,enterGroupName:`Enter group name`,enterDescriptionOptional:`Enter description (optional)`,enterCurrentPassword:`Enter current password`,enterNewPasswordMin6:`Enter new password (min 6 characters)`,toast:{keyCopied:`Key copied to clipboard`,copyFailed:`Failed to copy key`,keyAddedToBrowser:`Key added to API Browser`,clearLogsFailed:`Failed to clear logs`,uiPreferencesReset:`UI preferences reset. Refreshing...`,authDisabled:`Authentication disabled successfully`,authDisableFailed:`Failed to disable authentication`,apiKeyCreated:`API key created`,apiKeyDeleted:`API key deleted`,userCreated:`User created successfully`,userUpdated:`User updated successfully`,userDeleted:`User deleted successfully`,groupCreated:`Group created successfully`,groupUpdated:`Group updated successfully`,groupDeleted:`Group deleted successfully`,fillRequiredFields:`Please fill in all required fields`,passwordsDoNotMatch:`Passwords do not match`,passwordTooShort:`Password must be at least 8 characters`,passwordNeedsUppercase:`Password must contain at least one uppercase letter`,passwordNeedsLowercase:`Password must contain at least one lowercase letter`,passwordNeedsDigit:`Password must contain at least one digit`,passwordNeedsSpecial:`Password must contain at least one special character`,enterGroupName:`Please enter a group name`,settingsSaved:`Settings saved`,noPermissionUpdate:`You do not have permission to change settings`,cameraSettingsSaved:`Camera settings saved`,enterCameraUrl:`Please enter a camera URL`,passwordChanged:`Password changed successfully`,connectionFailed:`Connection failed`,testFailed:`Test failed`,cameraConnected:`Camera connected{{resolution}}`,cameraConnectedCoalesced:`Camera connected{{resolution}} (shared with a capture already running)`},testConnection:`Test Connection`,catalog:{spoolCatalog:`Spool Catalog`,spoolCatalogDescription:`Empty spool weights by brand/type. Used for automatic weight lookup when adding spools.`,searchCatalog:`Search catalog...`,addNewEntry:`Add New Entry`,namePlaceholder:`Name (e.g., Bambu Lab - Plastic)`,weight:`Weight`,type:`Type`,default:`Default`,custom:`Custom`,noMatch:`No entries match your search`,empty:`No entries in catalog`,deleteEntry:`Delete Entry`,deleteConfirm:`Are you sure you want to delete "{{name}}"?`,resetCatalog:`Reset Catalog`,resetConfirm:`Reset catalog to defaults? This will remove all custom entries.`,loadFailed:`Failed to load spool catalog`,nameWeightRequired:`Name and weight are required`,entryAdded:`Entry added`,addFailed:`Failed to add entry`,entryUpdated:`Entry updated`,updateFailed:`Failed to update entry`,entryDeleted:`Entry deleted`,deleteFailed:`Failed to delete entry`,resetSuccess:`Catalog reset to defaults`,resetFailed:`Failed to reset catalog`,exported:`Exported {{count}} entries`,imported:`Imported {{added}} entries ({{skipped}} skipped)`,importFailed:`Failed to import: invalid JSON format`,exportTooltip:`Export catalog to JSON`,importTooltip:`Import catalog from JSON`,resetTooltip:`Reset to defaults`,selectedCount:`{{count}} selected`,deleteSelected:`Delete Selected`,bulkDeleteConfirm:`Are you sure you want to delete {{count}} entries?`,bulkDeleted:`Deleted {{count}} entries`,bulkDeleteFailed:`Failed to delete entries`,material:`Material`,spoolWeight:`Spool Weight`,color:`Color`,updateSpoolWeight:`Update Spool Weight`,filamentUpdated:`Filament updated`,filamentUpdateFailed:`Failed to update filament`,filamentUpdateInvalid:`Invalid filament data`,keepExistingSpoolWeight:`Keep old weight for existing spools`,keepExistingSpoolWeightDesc:`Spools already created with this filament type retain the old tare weight. New spools use the updated value.`,applyToAllSpools:`Apply to all spools`,applyToAllSpoolsDesc:`All weight calculations for this filament type immediately use the new tare weight.`},colorCatalog:{title:`Color Catalog`,description:`Filament colors by manufacturer/material. Used for automatic color lookup when adding spools.`,searchColors:`Search colors...`,allManufacturers:`All manufacturers`,addNewColor:`Add New Color`,manufacturer:`Manufacturer`,colorName:`Color Name`,hex:`Hex`,materialOptional:`Material (optional)`,showing:`Showing {{filtered}} of {{total}} colors`,noMatch:`No colors match your search`,empty:`No colors in catalog`,deleteColor:`Delete Color`,deleteConfirm:`Are you sure you want to delete "{{name}}"?`,resetCatalog:`Reset Color Catalog`,resetConfirm:`Reset catalog to defaults? This will remove all custom colors.`,sync:`Sync`,starting:`Starting...`,syncTooltip:`Sync from FilamentColors.xyz (2000+ colors, may take a minute)`,loadFailed:`Failed to load color catalog`,fieldsRequired:`Manufacturer, color name, and hex color are required`,colorAdded:`Color added`,addFailed:`Failed to add color`,colorUpdated:`Color updated`,updateFailed:`Failed to update color`,colorDeleted:`Color deleted`,deleteFailed:`Failed to delete color`,resetSuccess:`Color catalog reset to defaults`,resetFailed:`Failed to reset catalog`,syncUpToDate:`Already up to date ({{count}} colors checked)`,syncComplete:`Added {{added}} new colors ({{skipped}} already existed)`,syncError:`Sync error`,syncFailed:`Failed to sync from FilamentColors.xyz`,exported:`Exported {{count}} colors`,imported:`Imported {{added}} colors ({{skipped}} skipped)`,importFailed:`Failed to import: invalid JSON format`,selectedCount:`{{count}} selected`,deleteSelected:`Delete Selected`,bulkDeleteConfirm:`Are you sure you want to delete {{count}} colors?`,bulkDeleted:`Deleted {{count}} colors`,bulkDeleteFailed:`Failed to delete colors`},dateFormat:`Date Format`,dateFormatUs:`US (MM/DD/YYYY)`,dateFormatEu:`EU (DD/MM/YYYY)`,dateFormatIso:`ISO (YYYY-MM-DD)`,timeFormat:`Time Format`,timeFormat12:`12-hour (3:30 PM)`,timeFormat24:`24-hour (15:30)`,defaultPrinter:`Default Printer`,defaultPrinterDescription:`Pre-select this printer for uploads, reprints, and other operations.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Use Sidebar to reorder items, reset visibility, and manage custom links.`,setDefault:`Set Default`,sidebarOrderSetDefaultHint:`Set default applies the current menu order to users who haven't customized theirs.`,sidebarDefaultSet:`Default menu order has been set.`,sidebarDefaultCleared:`Default menu order cleared.`,sidebarDefaultFailed:`Failed to set default menu order.`,reset:`Reset`,darkMode:`Dark Mode`,lightMode:`Light Mode`,active:`(active)`,background:`Background`,accent:`Accent`,style:`Style`,bgNeutral:`Neutral`,bgWarm:`Warm`,bgCool:`Cool`,bgOled:`OLED Black`,bgSlate:`Slate Blue`,bgForest:`Forest Green`,accentGreen:`Green`,accentTeal:`Teal`,accentBlue:`Blue`,accentOrange:`Orange`,accentPurple:`Purple`,accentRed:`Red`,styleClassic:`Classic`,styleGlow:`Glow`,styleVibrant:`Vibrant`,themeToggleHint:`Toggle between dark, light, and system mode using the icon in the sidebar.`,progressInTitle:`Print progress in tab`,progressInTitleDescription:`Show the active print's percentage and a progress ring in the browser tab.`,autoArchivePrints:`Auto-archive prints`,autoArchiveDescription:`Automatically save 3MF files when prints complete`,saveThumbnailsDescription:`Extract and save preview images from 3MF files`,captureFinishPhotoDescription:`Take a photo from printer camera when print completes. Bambuddy records a brief timelapse during the print so the photo can be sourced from the moment before the bed drops; the timelapse file is kept if you enabled timelapse for this print, otherwise it is deleted automatically after the photo is captured.`,finishPhotoRestorePlate:`Restore plate for finish photo`,finishPhotoRestorePlateDescription:`The printer drops the build plate about 100 mm when a print ends, leaving the finished print below the camera's framing. Bambuddy raises it back to just above the last printed layer, takes the photo, then lowers it again. Skipped when the print height is unknown or another job is queued.`,ffmpegNotInstalled:`ffmpeg not installed`,ffmpegRequired:`Camera capture requires ffmpeg. Install it via <brew>brew install ffmpeg</brew> (macOS) or <apt>apt install ffmpeg</apt> (Linux).`,camera:`Camera`,cameraViewMode:`Camera View Mode`,cameraOverlayDescription:`Camera opens in a resizable overlay on the main screen`,cameraWindowDescription:`Camera opens in a separate browser window`,externalCamerasDescription:`Configure external cameras to replace the built-in printer camera. Supports MJPEG streams, RTSP, HTTP snapshots, and USB cameras (V4L2). When enabled, the external camera is used for live view and finish photos.`,cameraPlaceholderUsb:`Device path (/dev/video0)`,cameraPlaceholderUrl:`Camera URL (rtsp://... or http://...)`,cameraTypeMjpeg:`MJPEG Stream`,cameraTypeRtsp:`RTSP Stream`,cameraTypeSnapshot:`HTTP Snapshot`,cameraTypeUsb:`USB Camera (V4L2)`,cameraSnapshotUrl:`Snapshot URL (optional)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`Single-frame URL used for notification thumbnails, finish photos, layer-timelapse frames, and plate detection. Timelapse and plate detection each require their own per-printer toggle — this URL is just the image source they pull from when active. Leave blank to capture from the live stream above. Useful for go2rtc (/api/frame.jpeg) and IP cameras with a dedicated snapshot endpoint.`,cameraRotation:`Rotation`,test:`Test`,connected:`Connected`,disconnected:`Disconnected`,currency:`Currency`,defaultFilamentCost:`Default filament cost (per kg)`,electricityCost:`Electricity cost per kWh`,energyDisplayMode:`Energy display mode`,energyModePrintDescription:`Dashboard shows sum of energy used during prints`,energyModeTotalDescription:`Dashboard shows lifetime energy from smart plugs`,fileManager:`File Manager`,createArchiveEntry:`Create Archive Entry When Printing`,createArchiveEntryDescription:`When printing from File Manager, optionally create an archive entry`,lowDiskSpaceWarning:`Low Disk Space Warning`,lowDiskSpaceDescription:`Show warning when free disk space falls below this threshold`,printerFirmware:`Printer Firmware`,checkFirmwareDescription:`Check for printer firmware updates from Bambu Lab`,bambuddySoftware:`Bambuddy Software`,autoCheckDescription:`Automatically check for new versions on startup`,checkNow:`Check now`,updateAvailableVersion:`Update available: v{{version}}`,releaseNotes:`Release Notes`,updateViaDocker:`Update via Docker Compose:`,composeDirectory:`Compose directory`,composeDirectoryHint:`Directory containing your docker-compose.yml. Leave blank to omit the cd.`,copyUpdateCommand:`Copy update command`,updateViaHomeAssistant:`Updates are managed by the Home Assistant Supervisor. Open Settings → Add-ons → Bambuddy in Home Assistant to install the new version.`,updateViaWindowsInstaller:`Windows installations are updated by re-running the installer. Download the new version below — your data, settings and printers are preserved.`,downloadWindowsInstaller:`Download installer for v{{version}}`,installUpdate:`Install Update`,latestVersionRunning:`You're running the latest version`,failedToCheckUpdates:`Failed to check for updates: {{error}}`,backupRestore:`Backup & Restore`,backupRestoreDescription:`Export/import settings and configure GitHub backup`,goToBackup:`Go to Backup`,externalUrl:`External URL`,externalUrlDescription:`The external URL where Bambuddy is accessible. Used for notification images and external integrations.`,bambuddyUrl:`Bambuddy URL`,externalUrlHint:`Include protocol and port (e.g., http://192.168.1.100:8000)`,ftpRetry:`FTP Retry`,ftpRetryDescription:`Retry FTP operations when printer WiFi is unreliable. Applies to 3MF downloads, print uploads, timelapse downloads, and firmware updates.`,autoRetryDescription:`Automatically retry failed FTP operations`,retryAttempts:`Retry attempts`,retryDelay:`Retry delay`,connectionTimeout:`Connection timeout`,time_one:`{{count}} time`,time_other:`{{count}} times`,second_one:`{{count}} second`,second_other:`{{count}} seconds`,nSeconds:`{{count}} seconds`,increaseForWeakWifi:`Increase for printers with weak WiFi`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Connect to Home Assistant to control smart plugs via HA's REST API. Supports switch, light, input_boolean, and script entities.`,homeAssistantUrl:`Home Assistant URL`,longLivedAccessToken:`Long-Lived Access Token`,haTokenHint:`Create a token in HA: Profile → Long-Lived Access Tokens → Create Token`,connectionSuccessful:`Connection Successful`,connectionFailed:`Connection Failed`,haConnectionSuccess:`Successfully connected to Home Assistant.`,haConnectionFailed:`Failed to connect to Home Assistant.`,mqttPublishing:`MQTT Publishing`,mqttDescription:`Publish BamBuddy events to an external MQTT broker for integration with Node-RED, Home Assistant, and other automation systems.`,mqttEnableDescription:`Publish events to external MQTT broker`,brokerHostname:`Broker hostname`,port:`Port`,usernameOptional:`Username (optional)`,passwordOptional:`Password (optional)`,topicPrefix:`Topic prefix`,topicPrefixHint:`Topics will be: {{prefix}}/printers/<serial>/status, etc.`,prometheusMetrics:`Prometheus Metrics`,prometheusEndpointDescription:`Expose printer metrics at <code>/api/v1/metrics</code> for Prometheus/Grafana monitoring.`,bearerTokenOptional:`Bearer Token (optional)`,bearerTokenHint:`If set, requests must include <code>Authorization: Bearer <token></code>`,metricsConnectionStatus:`Connection status`,metricsPrinterState:`Printer state (idle/printing/etc)`,metricsPrintProgress:`Print progress 0-100%`,metricsBedTemp:`Bed temperature`,metricsNozzleTemp:`Nozzle temperature`,metricsPrintsTotal:`Total prints by result`,metricsMore:`...and more (layers, fans, queue, filament usage)`,smartPlugsDescription:`Connect smart plugs (Tasmota or Home Assistant) to automate power control and track energy usage for your printers.`,allOn:`All On`,allOff:`All Off`,addSmartPlug:`Add Smart Plug`,energySummary:`Energy Summary`,currentPower:`Current Power`,plugsOnline:`{{reachable}}/{{total}} plugs online`,today:`Today`,yesterday:`Yesterday`,total:`Total`,enablePlugsForSummary:`Enable plugs to see energy summary`,addNotificationProvider:`Add`,systemBadge:`(System)`,creating:`Creating...`,changing:`Changing...`,deleteUserAndItems:`Delete user AND their items`,deleteUserKeepItems:`Delete user, keep items (become ownerless)`,ok:`OK`,twoFa:{totpTitle:`Authenticator App (TOTP)`,totpDesc:`Use an authenticator app like Google Authenticator, Aegis or Authy.`,emailOtpTitle:`Email OTP`,emailOtpDesc:`Send a one-time code to {{email}} when you log in.`,emailOtpNoEmail:`Add an email address to your account to enable this method.`,addEmailFirst:`Your account has no email address. Ask an admin to add one before enabling Email OTP.`,setupTotp:`Set up Authenticator App`,setupAuthApp:`Set up Authenticator App`,setupInstructions:`Scan the QR code below with your authenticator app, then confirm with a code.`,manualEntry:`Can't scan? Enter this secret manually:`,scannedContinue:`I've scanned the code — continue`,enterCodeToConfirm:`Enter the 6-digit code from your authenticator app to confirm setup.`,activate:`Activate`,disableTotp:`Disable Authenticator`,disableConfirmHint:`Enter a valid TOTP code or a backup code to disable the authenticator.`,totpDisabled:`Authenticator app disabled.`,emailOtpEnabled:`Email OTP enabled.`,emailOtpDisabled:`Email OTP disabled.`,smtpRequired:`Please configure and test SMTP settings first.`,invalidCode:`Invalid code. Please try again.`,enableEmailOtp:`Enable Email OTP`,disableEmailOtp:`Disable Email OTP`,emailSetupEnterCode:`A verification code has been sent to your email address. Enter it below to confirm you own this inbox.`,verifyAndEnable:`Verify & Enable`,emailDisablePasswordHint:`Enter your account password to confirm disabling email OTP.`,passwordPlaceholder:`Enter your password`,backupCodesTitle:`Save your backup codes`,backupCodesWarning:`Save these codes somewhere safe. Each code can only be used once and they will not be shown again.`,backupCodesRemaining:`{{count}} backup codes remaining`,savedCodes:`I've saved my codes`,regenBackup:`Regenerate Backup Codes`,regenBackupHint:`Enter your current TOTP code to generate 10 new backup codes. All existing backup codes will be invalidated.`,newBackupCodes:`New backup codes`,linkedAccounts:`Linked SSO Accounts`,linkedAccountsDesc:`These external identity providers are linked to your account.`,oidcUnlinked:`Account unlinked.`},sessionPolicy:{title:`Session Policy`,description:`Maximum session lifetime for new user logins. Already-issued tokens keep their original expiry.`,preset24h:`24 hours`,preset7d:`7 days`,preset30d:`30 days`,customHoursLabel:`Custom session lifetime in hours`,hoursSuffix:`hours`,warning:`Longer sessions reduce automatic logout protection. Recommended only for trusted single-user deployments.`},oidc:{title:`SSO / OIDC Providers`,desc:`Configure OpenID Connect providers to allow single sign-on via external identity providers.`,addProvider:`Add Provider`,newProvider:`New Provider`,empty:`No OIDC providers configured yet.`,created:`Provider created.`,updated:`Provider updated.`,deleted:`Provider deleted.`,refreshIcon:`Refresh icon`,removeIcon:`Remove icon`,iconRefreshed:`Icon refreshed.`,iconRemoved:`Icon removed.`,iconFetchFailed:`Icon could not be fetched from the provider URL.`,deleteTitle:`Delete Provider`,deleteMessage:`Delete "{{name}}"? All linked user accounts will be disconnected.`,form:{name:`Display Name`,issuerUrl:`Issuer URL`,clientId:`Client ID`,clientSecret:`Client Secret`,scopes:`Scopes`,iconUrl:`Icon URL (optional)`,enabled:`Enabled`,autoCreate:`Auto-create users`,autoCreateDesc:`Automatically create a local account on first login.`,autoLink:`Auto-link existing accounts`,autoLinkDesc:`Link existing local accounts by matching email on first login.`,secretHint:`leave blank to keep current`,secretPlaceholder:`new secret`,emailClaim:`Email Claim`,emailClaimDesc:`JWT claim used as email identity. Use 'preferred_username' or 'upn' for Azure Entra ID (which does not send email_verified). Only use trusted claim names.`,emailClaimPlaceholder:`email`,emailClaimCustomClaimAutoLinkWarning:`Custom claims are safe for auto-link only when the value is tenant-administered (e.g. Azure Entra ID upn / preferred_username). Do not enable auto-link if your IdP allows users to self-assert this claim.`,requireEmailVerified:`Require email verified`,requireEmailVerifiedDesc:`Only accept the email claim when the provider marks it as verified.`,requireEmailVerifiedWarning:`Warning: email will be accepted even without verification. Use only with trusted providers.`,requireEmailVerifiedAutoLink:`Disable auto-link first to change this setting.`,defaultGroup:`Default Group`,defaultGroupDesc:`Group assigned to auto-created users. Falls back to Viewers if not set.`,defaultGroupViewersFallback:`Viewers (default)`,autologin:`Autologin`,autologinDesc:`Redirect unauthenticated visitors straight to this provider. Only one provider can carry this flag.`}},encryption:{title:`MFA Encryption Status`,enabledFromEnv:`At-rest encryption enabled (key from MFA_ENCRYPTION_KEY environment variable)`,enabledFromFile:`At-rest encryption enabled (key loaded from data directory)`,enabledGenerated:`At-rest encryption enabled with auto-generated key`,notConfigured:`At-rest encryption not configured`,notConfiguredDesc:`TOTP secrets and OIDC client_secrets are stored in plaintext. Set MFA_ENCRYPTION_KEY or restart Bambuddy with a writable data directory to auto-generate one.`,allEncrypted:`All MFA secrets are encrypted at rest.`,legacyRowsLabel:`Legacy plaintext rows`,encryptedRowsLabel:`Encrypted rows`,legacyRowsWarning:`{{count}} legacy plaintext row(s) detected. Re-save the OIDC provider or re-enroll the user’s authenticator app to migrate to encrypted storage.`,backupHint:`The auto-generated key is stored at DATA_DIR/.mfa_encryption_key and is included in local backup ZIPs. Keep your backups secure or set MFA_ENCRYPTION_KEY explicitly.`,decryptionBrokenTitle:`Encryption key missing`,decryptionBrokenError:`{{count}} encrypted record(s) cannot be decrypted because the encryption key is no longer available. Restore the previous MFA_ENCRYPTION_KEY or DATA_DIR/.mfa_encryption_key to recover.`,migrationErrorWarning:`{{count}} legacy row(s) failed to re-encrypt at startup. Check server logs and restart Bambuddy to retry.`},pipelineLimits:{title:`Slicer Pipeline limits`,maxCopiesLabel:`Max copies per run`,maxCopiesDesc:`Upper bound on the copies operators can request when running a pipeline. Server-side hard cap is 1000.`},pipelines:{title:`Slicer Pipelines`,subtitle:`Reusable preset bundles (printer + process + filaments + bed type). Save one from the Slice dialog and apply it with a single click on the next file.`,loading:`Loading pipelines…`,loadError:`Could not load pipelines.`,confirmDelete:`Delete this pipeline? This cannot be undone.`,staleWarning:`One or more referenced presets no longer exist. Re-save this pipeline from the Slice dialog to fix.`,empty:{title:`No pipelines yet.`,howto:`Open the Slice dialog for any file, pick your printer / process / filaments / bed type, then click "Save as pipeline". Your saved pipelines will appear here.`},field:{name:`Pipeline name`,description:`Description`,targetPrinter:`Target printer`,noTarget:`— No target —`,targetKind:`Target type`,targetKindSpecific:`Specific printer`,targetKindClass:`Printer class`,targetModelClass:`Printer model`,fanoutStrategy:`Fanout strategy`,fanout:{max_parallel:`Max parallel — distribute across any idle matching printer`,round_robin:`Round robin — cycle through eligible printers`,fill_one_first:`Fill one first — pin all copies to one printer`},fanoutShort:{max_parallel:`parallel`,round_robin:`round robin`,fill_one_first:`fill one first`}},action:{save:`Save`,cancel:`Cancel`,rename:`Rename`,delete:`Delete`},slot:{printer:`Printer`,process:`Process`,filament:`Filament`,filamentN:`Filament {{n}}`,filamentAll:`All {{n}} slots`,bed:`Bed`},group:{profiles:`Profiles`,filaments:`Filaments`},searchPlaceholder:`Search pipelines…`,filterTargetType:`Filter by target type`,filterTarget:`Filter by target`,filter:{all:`All targets`,noTarget:`No target set`,count:`{{shown}} / {{total}}`,noMatches:`No pipelines match the current filters.`},toast:{saved:`Pipeline saved`,saveFailed:`Save failed`,deleted:`Pipeline deleted`,deleteFailed:`Delete failed`},noTargetHint:`Set a target printer to run this`,noTargetWarning:`Set a target printer before running this pipeline.`,runs:{lastRun:`Last run`,status:{queued:`queued`,slicing:`slicing`,dispatching:`dispatching`,in_progress:`printing`,completed:`completed`,failed:`failed`,partial_failure:`partial failure`,cancelled:`cancelled`}}}},notification:{printStarted:{title:`Print Started`,body:`{{printer}}: {{filename}} has started printing`},printCompleted:{title:`Print Completed`,body:`{{printer}}: {{filename}} completed successfully`},printFailed:{title:`Print Failed`,body:`{{printer}}: {{filename}} has failed`},printStopped:{title:`Print Stopped`,body:`{{printer}}: {{filename}} was stopped`},printProgress:{title:`Print Progress`,body:`{{printer}}: {{filename}} is {{percent}}% complete`},printerOffline:{title:`Printer Offline`,body:`{{printer}} is offline`},printerError:{title:`Printer Error`,body:`{{printer}}: {{error}}`},filamentLow:{title:`Low Filament`,body:`{{printer}}: Filament is running low`},maintenanceDue:{title:`Maintenance Due`,body:`{{printer}}: {{items}} need attention`}},errors:{generic:`Something went wrong`,networkError:`Network error. Please check your connection.`,notFound:`Not found`,unauthorized:`Unauthorized`,serverError:`Server error`,validationError:`Please check your input`,printerConnectionFailed:`Failed to connect to printer`,saveFailed:`Failed to save changes`,deleteFailed:`Failed to delete`,loadFailed:`Failed to load data`},hmsErrors:{title:`Errors - {{name}}`,noErrors:`No errors`,viewOnWiki:`View on Bambu Lab Wiki`,mqttVerifyFailedRemedy:`Enable Developer Mode on the printer, restart the printer, then start the job again.`,unknownCode:`Unknown HMS code — see the Bambu Lab wiki for details.`,clearInstructions:`Clear errors on the printer to dismiss them here.`,clearErrors:`Clear Errors`,clearSuccess:`HMS errors cleared`,clearFailed:`Failed to clear HMS errors`,actionSuccess:`Action sent to printer`,actionFailed:`Failed to send action`,runoutExpectedSlot:`Filament ran out in {{ranOut}}. The printer is now waiting for compatible filament in {{expected}}. Insert a spool into {{expected}}, then select Retry.`,runoutExpectedSlotOnly:`The printer is waiting for compatible filament in {{expected}}. Insert a spool there, then select Retry.`,runoutSlotUnknown:`Filament ran out and the print is paused. Bambuddy could not determine which slot the printer now expects — check the printer screen for the requested slot.`,actions:{RESUME_PRINTING:`Resume Printing`,RESUME_PRINTING_DEFECTS:`Resume (defects acceptable)`,RESUME_PRINTING_PROBELM_SOLVED:`Resume (problem solved)`,STOP_PRINTING:`Stop Printing`,CHECK_ASSISTANT:`Check Assistant`,FILAMENT_EXTRUDED:`Filament Extruded, Continue`,RETRY_FILAMENT_EXTRUDED:`Not Extruded Yet, Retry`,CONTINUE:`Finished, Continue`,LOAD_VIRTUAL_TRAY:`Load Filament`,OK_BUTTON:`OK`,FILAMENT_LOAD_RESUME:`Filament Loaded, Resume`,JUMP_TO_LIVEVIEW:`View Liveview`,NO_REMINDER_NEXT_TIME:`No Reminder Next Time`,REFRESH_NOZZLE:`Recheck`,IGNORE_NO_REMINDER_NEXT_TIME:`Ignore. Don't Remind Next Time`,IGNORE_RESUME:`Ignore this and Resume`,PROBLEM_SOLVED_RESUME:`Problem Solved and Resume`,TURN_OFF_FIRE_ALARM:`Got it, Turn off the Fire Alarm.`,RETRY_PROBLEM_SOLVED:`Retry (problem solved)`,CANCLE:`Cancle`,STOP_DRYING:`Stop Drying`,PROCEED:`Proceed`,OK_JUMP_RACK:`OK`,ABORT:`Abort`,DISABLE_PURIFICATION:`Disable Purification for This Print`,DONT_REMIND_NEXT_TIME:`Don't Remind Me`,DBL_CHECK_CANCEL:`Cancel`,DBL_CHECK_DONE:`Done`,DBL_CHECK_RETRY:`Retry`,DBL_CHECK_RESUME:`Resume`,DBL_CHECK_OK:`Confirm`,REMOVE_CLOSE_BTN:`Close`}},mqttDebug:{title:`MQTT Debug Log`,searchPlaceholder:`Search topic or payload...`,noMessages:`No messages logged yet`,startLoggingHint:`Click "Start Logging" to begin capturing MQTT messages`,noMessagesMatch:`No messages match your filter`,adjustFilterHint:`Try adjusting your search or filter criteria`,incoming:`Incoming`,outgoing:`Outgoing`,loggingStopped:`Logging stopped`,loggingActive:`Logging active - messages will auto-refresh`,startLogging:`Start Logging`,stopLogging:`Stop Logging`,clearLog:`Clear Log`,topic:`Topic`,timestamp:`Timestamp`,direction:`Direction`,all:`All`},printerFiles:{zipStarted_one:`Started ZIP download for {{count}} file`,zipStarted_other:`Started ZIP download for {{count}} files`,zipPartial:`ZIP download started with {{successful}} of {{total}} files; the rest could not be retrieved`,downloadFailed:`Download failed: {{error}}`,unknownError:`Unknown error`,shiftSelectHint:`Shift-click to select a range`,selectFile:`Select {{name}}`,deselectFile:`Deselect {{name}}`,title:`File Manager`,storageUsed:`Used:`,storageFree:`Free:`,filterPlaceholder:`Filter files...`,deleteButton:`Delete`,deleteFiles:`Delete {{count}} Files`,deleteFileConfirm:`Delete "{{name}}"? This cannot be undone.`,deleteFilesConfirm:`Delete {{count}} selected files? This cannot be undone.`,noFiles:`No files on printer`,printerUnavailable:`The printer file service is unavailable. Try again when the printer is reachable.`,loadingFiles:`Loading files...`,failedToLoad:`Failed to load files`,toast:{filesDeleted:`Deleted {{count}} file(s)`,deleteFailed:`Delete failed: {{error}}`}},confirm:{delete:`Are you sure you want to delete this?`,unsavedChanges:`You have unsaved changes. Are you sure you want to leave?`,clearQueue:`Are you sure you want to clear the queue?`},login:{title:`Bambuddy Login`,subtitle:`Sign in to your account`,username:`Username`,usernamePlaceholder:`Enter your username`,usernameOrEmail:`Username or Email`,usernameOrEmailPlaceholder:`Username or @ Email`,password:`Password`,passwordPlaceholder:`Enter your password`,signIn:`Sign in`,signingIn:`Logging in...`,rememberMe:`Remember Me`,forgotPassword:`Forgot your password?`,autologinFailed:`Automatic SSO sign-in failed. Pick a provider below to continue.`,localDisabledNotice:`Local sign-in is disabled. Use one of the SSO providers below.`,loginSuccess:`Logged in successfully`,loginFailed:`Login failed`,enterCredentials:`Please enter username and password`,enterEmail:`Please enter your email address`,oidcLoginFailed:`OIDC login failed`,oidcErrors:{providerError:`The identity provider returned an error`,missingParameters:`OIDC callback is missing required parameters`,invalidState:`OIDC state is invalid or has already been used`,stateExpired:`OIDC login session expired — please try again`,providerNotFound:`OIDC provider not found`,discoveryFailed:`Failed to fetch OIDC discovery document`,invalidDiscovery:`OIDC discovery document is invalid`,networkError:`Network error during OIDC token exchange`,badResponse:`Unexpected response during OIDC token exchange`,noIdToken:`OIDC provider did not return an ID token`,validationFailed:`OIDC token validation failed`,nonceMismatch:`OIDC nonce mismatch — possible replay attack`,missingSubClaim:`OIDC token is missing the sub claim`,noLinkedAccount:`No local account is linked to this OIDC identity`,accountInactive:`Your account is inactive`,userResolutionFailed:`Failed to resolve your account`,internalError:`An internal error occurred during OIDC login`,tokenExchangeFailed:`OIDC token exchange failed`},forgotPasswordTitle:`Forgot Password`,forgotPasswordMessage:`If you've forgotten your password, please contact your system administrator to reset it.`,forgotPasswordEmailMessage:`Enter your email address and we'll send you a new password.`,emailAddress:`Email Address`,emailPlaceholder:`your.email@example.com`,cancel:`Cancel`,sending:`Sending...`,sendResetEmail:`Send Reset Email`,howToReset:`How to reset your password:`,resetStep1:`Contact your Bambuddy administrator`,resetStep2:`Ask them to reset your password in User Management`,resetStep3:`They can set a new temporary password for you`,resetStep4:`Log in with the new password and change it in Settings`,gotIt:`Got it`,resetPassword:{title:`Set New Password`,subtitle:`Enter and confirm your new password below.`,newPassword:`New Password`,newPasswordPlaceholder:`At least 8 characters`,confirmPassword:`Confirm Password`,confirmPasswordPlaceholder:`Repeat new password`,saving:`Saving…`,submit:`Set New Password`,backToLogin:`Back to login`,passwordsDoNotMatch:`Passwords do not match`,passwordTooShort:`Password must be at least 8 characters`,resetFailed:`Password reset failed. The link may have expired.`},twoFA:{title:`Two-Factor Authentication`,subtitle:`Your account is protected with 2FA. Enter the verification code below.`,methodAuthenticator:`Authenticator App`,methodEmail:`Email Code`,methodBackup:`Backup Code`,instructionsTotp:`Open your authenticator app and enter the 6-digit code for Bambuddy.`,instructionsEmail:`A 6-digit code has been sent to your email address. It expires in 10 minutes.`,instructionsEmailNotSent:`Click the button below to receive a verification code via email.`,instructionsBackup:`Enter one of your 8-character backup recovery codes. Each code can only be used once.`,sendCodeButton:`Send Code via Email`,sendingCode:`Sending...`,resendCode:`Resend code`,codeLabel:`Verification Code`,backupCodeLabel:`Backup Code`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Verify`,verifyingButton:`Verifying...`,backToLogin:`← Back to login`,orContinueWith:`or continue with`,signInWith:`Sign in with {{provider}}`,enterCode:`Please enter the verification code`,sendCodeFailed:`Failed to send verification code`,invalidCode:`Invalid code. Please try again.`}},setup:{title:`Bambuddy Setup`,subtitle:`Configure authentication for your Bambuddy instance`,enableAuth:`Enable Authentication`,adminAccount:`Admin Account`,adminAccountDesc:`If admin users already exist, authentication will be enabled using the existing admin accounts. Leave the fields below empty to use existing admins, or enter new credentials to create a new admin user.`,adminUsername:`Admin Username`,adminPassword:`Admin Password`,optionalIfAdminExists:`(optional if admin users exist)`,adminUsernamePlaceholder:`Enter admin username (optional)`,adminPasswordPlaceholder:`Enter admin password (optional)`,confirmPassword:`Confirm Password`,confirmPasswordPlaceholder:`Confirm admin password`,settingUp:`Setting up...`,completeSetup:`Complete Setup`,toast:{authEnabledAdminCreated:`Authentication enabled and admin user created`,authEnabledExistingAdmins:`Authentication enabled using existing admin users`,setupCompleted:`Setup completed`,enterBothCredentials:`Please enter both admin username and password, or leave both empty to use existing admin users`,passwordsDoNotMatch:`Passwords do not match`,passwordTooShort:`Password must be at least 6 characters`}},changePassword:{title:`Change Password`,currentPassword:`Current Password`,currentPasswordPlaceholder:`Enter current password`,newPassword:`New Password`,newPasswordPlaceholder:`Enter new password (min 6 characters)`,confirmPassword:`Confirm New Password`,confirmPasswordPlaceholder:`Confirm new password`,passwordsDoNotMatch:`Passwords do not match`,passwordTooShort:`Password must be at least 6 characters`,changing:`Changing...`,success:`Password changed successfully`,failed:`Failed to change password`},plateAlert:{title:`Print Paused!`,message:`Objects detected on build plate. The print has been automatically paused. Please clear the plate and resume the print.`,understand:`I Understand`},camera:{title:`Camera View`,invalidPrinterId:`Invalid printer ID`,live:`Live`,snapshot:`Snapshot`,restartStream:`Restart stream`,refreshSnapshot:`Refresh snapshot`,fullscreen:`Fullscreen`,exitFullscreen:`Exit fullscreen`,connectingToCamera:`Connecting to camera...`,capturingSnapshot:`Capturing snapshot...`,connectionLost:`Connection lost`,connectionFailed:`Camera connection failed`,reconnecting:`Reconnecting in {{countdown}}s... (attempt {{attempt}}/{{max}})`,reconnectNow:`Reconnect now`,cameraUnavailable:`Camera unavailable`,cameraUnavailableDesc:`Make sure the printer is powered on and connected.`,noCamera:`No camera available`,retry:`Retry`,cameraStream:`Camera stream`,zoomOut:`Zoom out`,zoomIn:`Zoom in`,resetZoom:`Reset zoom`,recording:`Recording`,startRecording:`Start Recording`,stopRecording:`Stop Recording`,chamberLight:`Toggle chamber light`,unavailable:`Camera unavailable`,diagnose:{button:`Diagnose`,modalTitle:`Camera diagnostic`,running:`Running diagnostic...`,runFailed:`Diagnostic could not run: {{error}}`,retry:`Run again`,stage:{tcp_reachable:`Network reachability`,first_frame:`Frame capture`,live_stream_active:`Live stream active`},summary:{all_ok:`Camera is working. The diagnostic completed all stages successfully.`,live_stream_active_healthy:`Camera is currently streaming with recent frames — no test needed.`,printer_unreachable:`Printer is not reachable. Check the IP address, network connection, and that the printer is powered on.`,camera_port_closed:`Printer is reachable but the camera port is closed. Make sure LAN-only mode and Developer Mode are enabled in the printer settings.`,no_frame:`Connected to the camera but no frames were received. Try again, or check that the camera is enabled in the printer settings.`,unknown_failure:`Camera diagnostic failed for an unknown reason. Check the support log for details.`},meta:{protocol:`Protocol`,port:`Port`,profile:`Profile`}}},groups:{title:`Group Management`,subtitle:`Manage permission groups for access control`,backToSettings:`Back to Settings`,createGroup:`Create Group`,noPermission:`You do not have permission to access this page.`,system:`System`,noDescription:`No description`,usersCount:`{{count}} users`,permissionsCount:`{{count}} permissions`,edit:`Edit`,delete:`Delete`,toast:{created:`Group created successfully`,updated:`Group updated successfully`,deleted:`Group deleted successfully`,enterGroupName:`Please enter a group name`},modal:{editGroup:`Edit Group`,createGroup:`Create Group`,cancel:`Cancel`,saving:`Saving...`,creating:`Creating...`,saveChanges:`Save Changes`},form:{groupName:`Group Name`,groupNamePlaceholder:`Enter group name`,systemGroupWarning:`System group names cannot be changed`,description:`Description`,descriptionPlaceholder:`Enter description (optional)`,permissions:`Permissions ({{count}} selected)`},deleteModal:{title:`Delete Group`,message:`Are you sure you want to delete this group? Users in this group will lose these permissions.`,confirm:`Delete Group`},editor:{title:`Edit Group`,createTitle:`Create Group`,search:`Search permissions...`,selectAll:`Select All`,clearAll:`Clear All`,permissionsSelected:`{{count}} selected`,noResults:`No permissions match your search`,websocketHint:`Required for live updates. Without it, the interface falls back to periodic polling.`}},users:{title:`User Management`,subtitle:`Manage users and their access to your Bambuddy instance`,backToSettings:`Back to Settings`,createUser:`Create User`,noPermission:`You do not have permission to access this page.`,admin:`Admin`,noGroups:`No groups`,active:`Active`,inactive:`Inactive`,edit:`Edit`,delete:`Delete`,system:`System`,noGroupsAvailable:`No groups available`,table:{username:`Username`,groups:`Groups`,status:`Status`,actions:`Actions`},toast:{created:`User created successfully`,updated:`User updated successfully`,deleted:`User deleted successfully`,fillRequired:`Please fill in all required fields`,passwordsDoNotMatch:`Passwords do not match`,passwordTooShort:`Password must be at least 6 characters`,ldapProvisioned:`Provisioned LDAP user "{{username}}"`},modal:{createUser:`Create User`,editUser:`Edit User`,cancel:`Cancel`,creating:`Creating...`,saving:`Saving...`,saveChanges:`Save Changes`,advancedAuthSubtitle:`with Advanced Authentication`,tabsAriaLabel:`User source`,localTab:`Local`,ldapTab:`LDAP`,ldapSearchLabel:`Search directory`,ldapSearchPlaceholder:`Type a username, name, or email...`,ldapMinChars:`Type at least 2 characters to search`,ldapTypeToSearch:`Start typing to search the LDAP directory`,ldapSearching:`Searching directory...`,ldapNoResults:`No matching users in the directory`,ldapSearchError:`Directory search failed. Check the LDAP server status.`,ldapAlreadyProvisioned:`Already provisioned`,ldapSelectedLabel:`Selected`,ldapProvision:`Provision user`,ldapProvisioning:`Provisioning...`,ldapErrorProvision:`Provisioning failed. Check the LDAP server status and try again.`},form:{username:`Username`,usernamePlaceholder:`Enter username`,email:`Email`,emailPlaceholder:`user@example.com`,password:`Password`,passwordPlaceholder:`Enter password`,confirmPassword:`Confirm Password`,confirmPasswordPlaceholder:`Confirm password`,newPasswordPlaceholder:`Enter new password`,confirmNewPasswordPlaceholder:`Confirm new password`,leaveBlankToKeep:`leave blank to keep current`,groups:`Groups`,optional:`optional`,autoGeneratedPassword:`A secure password will be automatically generated and emailed to the user.`,passwordManagedByAdvancedAuth:`Password is managed by Advanced Authentication. Use "Reset Password" to send a new password to the user via email.`,resetPassword:`Reset Password`,resettingPassword:`Resetting Password...`},deleteModal:{title:`Delete User`,message:`Are you sure you want to delete this user? This action cannot be undone.`,confirm:`Delete User`}},streamOverlay:{title:`Stream Overlay`,invalidPrinterId:`Invalid printer ID`,cameraStream:`Camera stream`,progress:`Progress`,eta:`ETA`,printerIdle:`Printer is idle`,printerOffline:`Printer offline`,builder:{title:`Streaming Overlay`,description:`Build the URL for a streaming overlay — a full-screen camera view with live print data drawn over it, for OBS, a wall display, or any browser source. Pick the fields you want and copy the URL.`,printer:`Printer`,size:`Text size`,sizeSmall:`Small`,sizeMedium:`Medium`,sizeLarge:`Large`,fps:`Frame rate`,fpsHint:`A1 and P1 cameras top out around 5 fps whatever you ask for.`,token:`Streaming Overlay token (optional)`,tokenHint:`Only needed when login is enabled: OBS has no session of its own. Create one above with the Streaming Overlay scope.`,tokenWarning:`This URL contains a token — anyone who can read it can watch the stream and see the file name. Revoke the token to cut it off.`,fields:`Fields to show`,fieldPrinter:`Printer name`,fieldFilename:`File name`,fieldStatus:`Status`,fieldProgress:`Progress bar`,fieldLayers:`Layer count`,fieldEta:`Time remaining and ETA`,fieldCamera:`Camera feed`,chamberHint:`Chamber temperature only appears on models with a real chamber sensor — P1 and A1 printers report a meaningless value, so it is left out there.`,urlTitle:`Overlay URL`,open:`Open`,showPreview:`Show preview`,hidePreview:`Hide preview`,previewTitle:`Overlay preview`},status:{printing:`Printing`,paused:`Paused`,finished:`Finished`,failed:`Failed`,idle:`Idle`,unknown:`Unknown`}},profiles:{title:`Profiles`,subtitle:`Manage your slicer presets and pressure advance calibrations`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Local Profiles`,kprofiles:`K-Profiles`},orcaCloud:{connectedAs:`Connected as`,connectedShort:`Connected to Orca Cloud`,logout:`Disconnect`,noLogoutPermission:`You do not have permission to disconnect`,noConnectPermission:`You do not have permission to connect to Orca Cloud`,retry:`Retry`,connectButton:`Connect Orca Cloud`,connect:{title:`Connect to Orca Cloud`,description:`Sign in to your Orca Cloud account to sync your slicer profiles into Bambuddy.`},device:{title:`Approve Bambuddy in Orca Cloud`,instruction:`Open Orca Cloud and approve this code. Bambuddy connects automatically once you approve.`,codeLabel:`Your pairing code`,openButton:`Open Orca Cloud approval page`,manualHint:`Or go to {{url}} and enter the code above.`,waiting:`Waiting for you to approve…`,cancel:`Cancel`},profiles:{title:`Your Orca Cloud profiles ({{count}})`,refresh:`Refresh`,empty:`No profiles found in your Orca Cloud account yet.`},toast:{disconnected:`Disconnected from Orca Cloud`},errors:{startFailed:`Could not start Orca Cloud pairing.`,denied:`The pairing was denied in Orca Cloud.`,expired:`The pairing code expired. Click Connect to try again.`,pollFailed:`Lost the connection while waiting for approval. Please try again.`}},localProfiles:{title:`Local Profiles`,subtitle:`Import and manage slicer presets from OrcaSlicer`,import:`Import Profiles`,importDesc:`Drop .bbscfg, .bbsflmt, .orca_filament, .zip, or .json files here`,importing:`Importing...`,search:`Search local presets...`,noPresets:`No local presets yet`,noSearchResults:`No presets match your search`,badge:`Local`,edit:`Edit`,delete:`Delete`,cancel:`Cancel`,deleteConfirmTitle:`Delete Preset`,deleteConfirm:`Are you sure you want to delete this preset? This cannot be undone.`,source:`Source`,inheritsFrom:`Inherits`,filamentType:`Type`,vendor:`Vendor`,compatiblePrinters:`Printers`,nozzleTemp:`Nozzle Temp`,cost:`Cost`,density:`Density`,pressureAdvance:`Pressure Advance`,filament:`Filament`,process:`Process`,printer:`Printer`,toast:{importSuccess:`{{count}} preset(s) imported`,importSkipped:`{{count}} preset(s) skipped (duplicates)`,importError:`{{count}} error(s) during import`,deleted:`Preset deleted`,updated:`Preset updated`}},connectedAs:`Connected as`,signInExpiredTitle:`Bambu Cloud sign-in expired`,signInExpiredBody:`Bambu Lab no longer accepts the stored token. Sign in again to restore cloud profiles, MakerWorld imports and firmware checks.`,logout:`Logout`,noLogoutPermission:`You do not have permission to logout`,failedToLoad:`Failed to load profiles`,retry:`Retry`,time:{justNow:`Just now`,minsAgo:`{{count}}m ago`,hoursAgo:`{{count}}h ago`,daysAgo:`{{count}}d ago`},toast:{loggedOut:`Logged out`},login:{title:`Connect to Bambu Cloud`,subtitle:`Sync your slicer presets across devices`,email:`Email`,password:`Password`,region:`Region`,regionGlobal:`Global`,regionChina:`China`,verificationCode:`Verification Code`,totpCode:`Authenticator Code`,checkEmail:`Check your email ({{email}}) for a 6-digit code`,enterTotpHint:`Enter the 6-digit code from your authenticator app`,accessToken:`Access Token`,accessTokenHint:`Paste your Bambu Cloud access token. China-region accounts must use this path (phone-bound — email login unavailable). See the wiki for how to retrieve the token from MakerWorld cookies.`,back:`Back`,loginButton:`Login`,verifyButton:`Verify`,setTokenButton:`Set Token`,useToken:`Use access token instead`,captchaTitle:`Bambu Cloud is asking for a CAPTCHA`,captchaBody:`Bambu is challenging your network before it will accept a sign-in, and the challenge cannot be answered from Bambuddy. Your email and password are not the problem. The block is tied to your public IP address and normally clears by itself within a few hours — retrying repeatedly makes it last longer. To sign in now, use an access token from a browser session instead.`,useEmail:`Login with email instead`,toast:{loggedIn:`Logged in successfully`,codeSent:`Verification code sent to your email`,enterTotp:`Enter code from your authenticator app`,tokenSet:`Token set successfully`}},presets:{myPreset:`My preset (editable)`,duplicate:`Duplicate`,editable:`Editable`,failedToLoadDetails:`Failed to load preset details`,deleteConfirm:`Delete this preset?`,deleteWarning:`This will permanently delete "{{name}}" from Bambu Cloud. This cannot be undone.`,noDuplicatePermission:`You do not have permission to duplicate presets`,noEditPermission:`You do not have permission to edit presets`,noDeletePermission:`You do not have permission to delete presets`,types:{filament:`Filament preset`,printer:`Printer preset`,process:`Process preset`},toast:{deleted:`Preset deleted`,created:`Preset created`,updated:`Preset updated`,duplicated:`Preset duplicated`,fieldAdded:`Field "{{key}}" added`,exported:`Preset exported`},baseLabel:`Base: {{name}}`,currentLabel:`Current: {{name}}`,newPreset:`New Preset`,editPreset:`Edit Preset`,duplicatePreset:`Duplicate Preset`,createNewPreset:`Create New Preset`,customizeSettings:`Customize settings for your new preset`,compareWithBase:`Compare with base preset`,compare:`Compare`,basePreset:`Base Preset`,selectBasePreset:`Select base preset...`,presetName:`Preset Name`,myCustomPreset:`My custom preset`,inheritsFrom:`Inherits from`,dropJsonToImport:`Drop JSON to import`,tabs:{common:`Common`,allFields:`All Fields`},availableFields:`Available Fields`,searchFieldsPlaceholder:`Search fields...`,noMatchingFields:`No matching fields`,allFieldsAdded:`All fields added`,addCustomField:`Add custom field`,yourOverrides:`Your Overrides`,noOverridesYet:`No overrides yet`,clickFieldsToAdd:`Click fields on the left to add them`,saveAsTemplate:`Save as template`,jsonTip:`Tip: Drag & drop a .json file anywhere on this modal to import settings`},cloudView:{searchPlaceholder:`Search presets...`,templates:`Templates`,refresh:`Refresh`,newPreset:`New Preset`,clearFilters:`Clear filters`,compareMode:`Compare Mode`,selectAnotherPreset:`Select another {{type}} preset`,clickTwoPresets:`Click two presets of the same type to compare`,selectFirst:`1. Select first`,selectSecond:`2. Select second`,compareNow:`Compare Now`,lastSynced:`Last synced:`,showingCount:`Showing {{showing}} of {{total}} presets`,noPresetsFound:`No presets found`,columns:{filament:`Filament`,process:`Process`,printer:`Printer`},noFilamentPresets:`No filament presets`,noProcessPresets:`No process presets`,noPrinterPresets:`No printer presets`,filters:{type:`Type`,owner:`Owner`,printer:`Printer`,nozzle:`Nozzle`,filament:`Filament`,layer:`Layer`,all:`All`,myPresets:`My Presets`,builtIn:`Built-in`,process:`Process`},noTemplatesPermission:`You do not have permission to manage templates`,noRefreshPermission:`You do not have permission to refresh profiles`,noCreatePermission:`You do not have permission to create presets`},templates:{title:`Quick Templates`,noTemplates:`No templates yet`,createFirst:`Create templates from the preset editor`,typeFilter:`Type:`,deleteTitle:`Delete Template`,deleteWarning:`This action cannot be undone`,deleteConfirm:`Are you sure you want to delete "{{name}}"?`,namePlaceholder:`Template name`,descriptionPlaceholder:`Description`,settingsJson:`Settings (JSON)`,fieldsCount:`{{count}} fields`,shownInModals:`Shown in modals`,hiddenInModals:`Hidden in modals`,apply:`Apply`,toast:{deleted:`Template deleted`,updated:`Template updated`,created:`Template created`,applied:`Template applied`}}},support:{debugLoggingActive:`Debug logging is active`,manageLogs:`Manage`,collectItem7:`Printer connectivity and firmware versions`,collectItem8:`Integration status (Spoolman, MQTT, HA)`,collectItem9:`Network interfaces (subnets only)`,collectItem10:`Python package versions`,collectItem11:`Database health checks`,collectItem12:`Docker environment details`,bundleGenerating:`Generating bundle...`,bundleStepConnection:`Running printer connectivity checks`,bundleStepVirtualPrinters:`Running virtual-printer setup checks`,bundleStepLogScan:`Scanning recent logs for known issues`,bundleStepBuild:`Building the support bundle ZIP`},fileManager:{variants:{badge:`{{count}} versions`,groupAction:`Group as versions`,groupTooltip:`Mark these files as the same job sliced for different printers`,grouped:`Grouped {{count}} files as versions`,printAlternatives:`Print ({{count}} alternatives)`},title:`File Manager`,subtitle:`Organize and manage your print files`,uploadFiles:`Upload Files`,newFolder:`New Folder`,folderName:`Folder Name`,folderNamePlaceholder:`e.g., Functional Parts`,renameFile:`Rename File`,renameFolder:`Rename Folder`,invalidFilenameChar:`The character "{{char}}" is not allowed in print filenames. The printer SD card rejects: < > : " / \\ | ? *`,moveFiles:`Move {{count}} File(s)`,rootNoFolder:`Root (No Folder)`,current:`current`,linkFolder:`Link Folder`,linkFolderDescription:`Link "{{name}}" to a project or archive for quick access.`,project:`Project`,archive:`Archive`,noProjectsFound:`No projects found`,noArchivesFound:`No archives found`,unlink:`Unlink`,link:`Link`,dragDropFiles:`Drag & drop files here`,dropFilesHere:`Drop files here`,releaseToUpload:`Release to upload`,orClickToBrowse:`or click to browse`,allFileTypesSupported:`All file types supported. ZIP files will be extracted.`,zipFilesDetected:`ZIP files detected`,zipExtractOptions:`ZIP files will be extracted. Choose how to handle folder structure:`,preserveZipStructure:`Preserve folder structure from ZIP`,createFolderFromZip:`Create folder from ZIP filename`,stlThumbnailGeneration:`STL thumbnail generation`,zipMayContainStl:`ZIP files may contain STL files. Thumbnails can be generated during extraction.`,thumbnailsCanBeGenerated:`Thumbnails can be generated for STL files. Large models may take longer to process.`,generateThumbnailsForStl:`Generate thumbnails for STL files`,threemfDetected:`3MF files detected`,threemfExtractionInfo:`Printer model, material, color, and print settings will be automatically extracted from 3MF files.`,willBeExtracted:`Will be extracted`,filesExtracted:`{{count}} files extracted`,uploadComplete:`Upload complete: {{succeeded}} succeeded`,uploadFailed:`Upload failed`,zipFilesFailed:`{{count}} files failed`,uploading:`Uploading...`,changeLink:`Change Link...`,linkTo:`Link to...`,linkToProjectOrArchive:`Link to project or archive`,generateThumbnail:`Generate Thumbnail`,generateThumbnails:`Generate Thumbnails`,generateThumbnailsForMissing:`Generate thumbnails for STL files missing them`,gridView:`Grid view`,listView:`List view`,lowDiskSpaceWarning:`Low disk space warning`,lowDiskSpaceDetails:`Only {{free}} free of {{total}} total. Threshold is set to {{threshold}} GB in settings.`,files:`Files`,folders:`Folders`,size:`Size`,free:`Free`,allFiles:`All Files`,allExternal:`External`,externalIsEmpty:`No external files`,externalEmptyDescription:`Files in your linked external folders will appear here.`,wrap:`Wrap`,enableTextWrapping:`Enable text wrapping`,disableTextWrapping:`Disable text wrapping`,collapse:`Collapse`,collapseFoldersByDefault:`Collapse folders by default`,expandFoldersByDefault:`Expand folders by default`,folderSort:`Sort folders`,folderSortByName:`By name`,folderSortByActivity:`By recent activity`,dragToResizeTooltip:`Drag to resize, double-click to reset`,searchFiles:`Search files...`,searchSubfoldersHint:`Including subfolders`,readme:{truncated:`Truncated`,show:`Show README`,hide:`Hide README`,label:`README`},tags:{title:`Tags`,subtitle:`Label files for cross-cutting filtering — toys, kid-safe, PETG-only, anything.`,manage:`Tags`,manageTitle:`Manage tag catalog`,add:`New tag`,edit:`Rename tag`,name:`Name`,fileCount:`Files`,empty:`No tags yet. Create one to start labelling files.`,noMatches:`No matching tags.`,createPlaceholder:`e.g. toys, kid-safe, petg`,createButton:`Create`,nameRequired:`Name is required.`,searchPlaceholder:`Filter tags...`,created:`Tag created.`,updated:`Tag renamed.`,deleted:`Tag removed.`,saveFailed:`Could not save tag.`,deleteFailed:`Could not remove tag.`,applyFailed:`Could not apply tags.`,applyAdd:`Add tags`,applyRemove:`Remove tags`,applyAddSuccess:`Added {{count}} tag(s) across {{files}} file(s).`,applyRemoveSuccess:`Removed {{count}} tag(s) across {{files}} file(s).`,actionAdd:`Add to selected files`,actionRemove:`Remove from selected files`,tagAction:`Tag`,bulkTitle:`Tag {{count}} selected file(s)`,bulkTooltip:`Add or remove tags on every selected file.`,noPermission:`You do not have permission to tag files.`,filterLabel:`Filtering by:`,clearAll:`Clear all`,confirmDelete:`Delete tag "{{name}}"?`,confirmDeleteMessage:`This removes the tag from the catalog. Files keep their other tags.`,confirmDeleteInUseMessage:`This tag is on {{count}} file(s). Deleting removes the chip from all of them; files themselves are untouched.`,editAria:`Edit {{name}}`,deleteAria:`Delete {{name}}`},allTypes:`All types`,prints:`Prints`,ascending:`Ascending`,descending:`Descending`,showModified:`Show modified dates`,hideModified:`Hide modified dates`,lastModified:`Last modified`,lastActivity:`Last activity`,resultsCount:`{{showing}} of {{total}} files`,selectAll:`Select All`,deselectAll:`Deselect All`,selected:`{{count}} selected`,adding:`Adding...`,loadingFiles:`Loading files...`,folderIsEmpty:`Folder is empty`,noFilesYet:`No files yet`,folderEmptyDescription:`Upload files or move files into this folder to get started.`,noFilesDescription:`Upload files to start organizing your print-related files.`,noMatchingFiles:`No matching files`,noMatchingFilesDescription:`No files match your current search or filter criteria.`,clearFilters:`Clear filters`,printedCount:`Printed {{count}}x`,uploadedBy:`Uploaded By`,deleteFolder:`Delete Folder`,deleteFile:`Delete File`,deleteFilesCount:`Delete {{count}} Files`,deleteFolderConfirm:`Are you sure you want to delete this folder? All files inside will also be deleted.`,deleteFileConfirm:`Are you sure you want to delete this file?`,deleteFilesConfirm:`Are you sure you want to delete {{count}} selected files? This action cannot be undone.`,deleting:`Deleting...`,noPermissionRenameFolder:`You do not have permission to rename folders`,noPermissionLinkFolder:`You do not have permission to link folders`,noPermissionDeleteFolder:`You do not have permission to delete folders`,onlyEmptyFoldersDeletable:`You can only delete empty folders`,noPermissionPrint:`You do not have permission to print`,noPermissionAddToQueue:`You do not have permission to add to queue`,noPermissionSlice:`You do not have permission to slice files`,noPermissionDownload:`You do not have permission to download files`,noPermissionPreview:`You do not have permission to preview files`,preview3d:`3D Preview`,noPermissionRenameFile:`You do not have permission to rename this file`,noPermissionGenerateThumbnail:`You do not have permission to generate thumbnails`,noPermissionDeleteFile:`You do not have permission to delete this file`,noPermissionCreateFolder:`You do not have permission to create folders`,noPermissionUpload:`You do not have permission to upload files`,noPermissionMoveFiles:`You do not have permission to move files`,noPermissionDeleteFiles:`You do not have permission to delete files`,linkExternal:`Link External`,linkExternalFolder:`Link External Folder`,linkExternalFolderDescription:`Mount a host directory (NAS, USB, network share) into the File Manager. Files are not copied — they are accessed directly from the original path.`,externalFolderNamePlaceholder:`e.g., NAS Prints`,externalPath:`Host Path`,externalPathHelp:`Absolute path to the directory on the Docker host. Must be bind-mounted into the container.`,readOnly:`Read Only`,readOnlyHelp:`prevents uploads and deletions`,showHiddenFiles:`Show hidden files (dotfiles)`,externalFolder:`External Folder`,scanFolder:`Scan`,toast:{folderCreated:`Folder created`,openInSlicerFailed:`Could not open in slicer`,folderDeleted:`Folder deleted`,fileDeleted:`File deleted`,filesDeleted:`Deleted {{count}} files`,filesMoved:`Files moved`,folderLinked:`Folder linked`,folderUnlinked:`Folder unlinked`,externalFolderLinked:`External folder linked and scanned`,folderScanned:`Scan complete: {{added}} added, {{removed}} removed`,addedToQueue:`Added {{count}} file(s) to queue`,addedToQueuePartial:`Added {{added}} file(s), {{failed}} failed`,failedToAddToQueue:`Failed to add files: {{error}}`,fileRenamed:`File renamed`,folderRenamed:`Folder renamed`,thumbnailsGenerated:`Generated {{count}} thumbnail(s)`,thumbnailsGeneratedPartial:`Generated {{succeeded}} thumbnail(s), {{failed}} failed`,noStlMissingThumbnails:`No STL files missing thumbnails`,failedToGenerateThumbnails:`Failed to generate thumbnails: {{error}}`,thumbnailGenerated:`Thumbnail generated`,failedToGenerateThumbnail:`Failed to generate thumbnail: {{error}}`}},projects:{parentLabel:`Parent project`,parentNone:`None (top-level project)`,parentHint:`Nest this project under another one so its figures roll up into a master project`,partOf:`Part of {{name}}`,subProjectCount:`{{count}} sub-projects`,subProjectsOf:`Sub-projects of {{name}}`,collapseSubProjects:`Collapse sub-projects`,expandSubProjects:`Expand sub-projects`,title:`Projects`,subtitle:`Organize and track your 3D printing projects`,newProject:`New Project`,editProject:`Edit Project`,deleteProject:`Delete Project`,projectName:`Project Name`,description:`Description`,noProjects:`No projects yet`,noProjectsFiltered:`No {{status}} projects`,noProjectsFilteredHelp:`You don't have any {{status}} projects. Projects will appear here when their status changes.`,createFirst:`Create your first project to start organizing related prints, tracking progress, and managing your builds.`,createFirstButton:`Create Your First Project`,create:`Create`,files:`Files`,prints:`Prints`,plates:`plates`,parts:`parts`,lastModified:`Last Modified`,deleteConfirm:`Are you sure you want to delete this project? Archives and queue items will be unlinked but not deleted.`,addFiles:`Add Files`,removeFile:`Remove File`,viewDetails:`View Details`,namePlaceholder:`e.g., Voron 2.4 Build`,descriptionPlaceholder:`Optional description...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URL must start with http:// or https://`,openExternalUrl:`Open project URL`,coverImageLabel:`Cover photo`,coverImageAlt:`Project cover photo`,coverImageUpload:`Upload`,coverImageReplace:`Replace`,coverImageRemove:`Remove`,color:`Color`,targetPlates:`Target Plates`,targetPlatesPlaceholder:`e.g., 25`,targetPlatesHelp:`Number of print jobs`,targetParts:`Target Parts`,targetPartsPlaceholder:`e.g., 150`,targetPartsHelp:`Total objects needed`,targetSets:`Copies per File`,targetSetsPlaceholder:`e.g., 10`,targetSetsHelp:`Times each printable file should be printed`,tagsLabel:`Tags (comma-separated)`,tagsPlaceholder:`e.g., voron, functional, gift`,dueDate:`Due Date`,priority:`Priority`,priorityLow:`Low`,priorityNormal:`Normal`,priorityHigh:`High`,priorityUrgent:`Urgent`,statusActive:`Active`,statusCompleted:`Completed`,statusArchived:`Archived`,done:`Done`,completed:`completed`,failed:`failed`,inQueue:`in queue`,noPrintsYet:`No prints yet`,printJobs:`Print jobs (plates)`,partsPrinted:`Parts printed`,failedParts:`Failed parts`,import:`Import`,export:`Export`,importProject:`Import project`,exportAll:`Export all projects`,loading:`Loading projects...`,noEditPermission:`You do not have permission to edit projects`,noDeletePermission:`You do not have permission to delete projects`,noCreatePermission:`You do not have permission to create projects`,noImportPermission:`You do not have permission to import projects`,noExportPermission:`You do not have permission to export projects`,toast:{created:`Project created`,updated:`Project updated`,deleted:`Project deleted`,imported:`Project imported`,multipleImported:`{{count}} projects imported`,importFailed:`Import failed`,exported:`Projects exported (metadata only)`}},projectDetail:{notFound:`Project not found`,backToProjects:`Back to Projects`,export:`Export`,exportProject:`Export project`,noExportPermission:`You do not have permission to export projects`,noEditPermission:`You do not have permission to edit projects`,partOf:`Part of:`,priorityLabel:`Priority:`,noPrints:`No prints in this project yet`,status:{active:`Active`,completed:`Completed`,archived:`Archived`},priority:{low:`Low`,normal:`Normal`,high:`High`,urgent:`Urgent`},dueDate:{overdue:`Overdue`,today:`Due today`,daysLeft:`{{count}} days left`},progress:{platesProgress:`Plates Progress`,partsProgress:`Parts Progress`,setsProgress:`Complete Sets`,sets:`sets`,setsHint:`A set is complete once every printable file has reached this count`,printJobs:`print jobs`,parts:`parts`,percentComplete:`{{percent}}% complete`,remaining:`{{count}} remaining`},stats:{printJobs:`Print Jobs`,total:`total`,failed:`{{count}} failed`,partsPrinted:`{{count}} parts printed`,printTime:`Print Time`,filamentUsed:`Filament Used`},cost:{title:`Cost Tracking`,filamentCost:`Filament Cost`,energy:`Energy`,totalCost:`Estimated Cost`,total:`Total`,includesBom:`incl. BOM`,budget:`Budget`,remaining:`Remaining`},subProjects:{title:`Sub-projects ({{count}})`,jobs:`{{count}} jobs`},rollup:{title:`Including {{count}} sub-projects`,progress:`Overall progress`,percentComplete:`{{percent}}% complete`},notes:{title:`Notes`,noEditPermission:`You do not have permission to edit notes`,placeholder:`Add notes about this project...`,empty:`No notes yet. Click Edit to add notes.`},files:{title:`Files`,linkFolders:`Link folders from the File Manager`,forQuickAccess:`to this project for quick access.`,fileCount:`{{count}} file(s)`,empty:`No folders linked. Go to File Manager and link a folder to this project.`,printedCount:`Printed {{count}} time(s)`,progressTooltip:`{{done}} of {{target}} completed prints`,noFiles:`No files in this folder.`},bom:{title:`Bill of Materials`,acquired:`{{completed}}/{{total}} acquired`,showAll:`Show all`,hideDone:`Hide done`,addPart:`Add Part`,noAddPermission:`You do not have permission to add parts`,partNamePlaceholder:`Part name (e.g., M3x8 screws)`,partName:`Part name`,qty:`Qty`,price:`Price ({{currency}})`,sourcingUrlPlaceholder:`Sourcing URL (optional)`,remarksPlaceholder:`Remarks (optional)`,deletePart:`Delete Part`,deleteConfirm:`Are you sure you want to delete "{{name}}"?`,noUpdatePermission:`You do not have permission to update parts`,noEditPermission:`You do not have permission to edit parts`,noDeletePermission:`You do not have permission to delete parts`,totalCost:`Total cost:`,empty:`No parts in the bill of materials. Add hardware, electronics, or other components to track what needs to be sourced.`},timeline:{title:`Activity Timeline`,empty:`No activity yet.`},template:{saveAsTemplate:`Save as Template`,noCreatePermission:`You do not have permission to create templates`},queue:{title:`Queue`,viewAll:`View all`,printing:`{{count}} printing`,queued:`{{count}} queued`},prints:{title:`Prints ({{count}})`},toast:{projectUpdated:`Project updated`,partAdded:`Part added`,partRemoved:`Part removed`,exportFailed:`Export failed`,projectExported:`Project exported`,templateCreated:`Template created`}},system:{title:`System Information`,version:`Version`,uptime:`Uptime`,cpuUsage:`CPU Usage`,memoryUsage:`Memory Usage`,diskUsage:`Disk Usage`,networkInfo:`Network Info`,logs:`Logs`,debugMode:`Debug Mode`,enableDebug:`Enable Debug Logging`,disableDebug:`Disable Debug Logging`,downloadLogs:`Download Logs`,clearLogs:`Clear Logs`,dockerInfo:`Docker Info`,containerName:`Container Name`,imageName:`Image Name`,platform:`Platform`,architecture:`Architecture`},sponsors:{sectionTitle:`Independent & community-funded`,tagline:`Bambuddy is free and stays that way because people choose to support it. No VC, no cloud lock-in.`,viewSupporters:`View supporters`,toastPrints:`You've completed {{count}} prints with Bambuddy. Bambuddy stays free thanks to its supporters.`,toastCost:`You've tracked {{total}} in filament with Bambuddy. See who keeps the project independent.`,toastArchives:`{{count}} prints archived with Bambuddy. See who keeps it independent.`,toastAnniversary:`One year with Bambuddy! See who keeps the project independent.`,toastVersionUpdate:`Updated to v{{version}}. Bambuddy stays free thanks to its supporters.`,toastBusiness:`Running Bambuddy on {{count}} printers? There's a support plan for teams — priority fixes, invoicing, and a direct line to the maintainer.`,businessCta:`Bambuddy for business`,businessTitle:`Bambuddy for business`,businessTagline:`You're running {{count}} printers. Priority support, commercial licensing and invoicing are available for teams and print farms.`},library:{title:`Filament Library`,addFilament:`Add Filament`,editFilament:`Edit Filament`,deleteFilament:`Delete Filament`,vendor:`Vendor`,material:`Material`,color:`Color`,kFactor:`K Factor`,temperature:`Temperature`,noFilaments:`No filaments in library`,deleteConfirm:`Are you sure you want to delete this filament?`,importFromPrinter:`Import from Printer`,exportToFile:`Export to File`,runWithPipeline:{actionLabel:`Run with pipeline`,noPermission:`You do not have permission to run pipelines`,modalTitle:`Run with pipeline`,confirmTitle:`Confirm run`,confirmIntro:`Pre-flight found issues with this run`,sourceHint:`Source`,pipelineHint:`Pipeline`,targetHint:`Target`,pipelineListAria:`Available pipelines`,runAnyway:`Run anyway`,loading:`Loading…`,empty:`No pipelines saved yet. Open the Slice dialog and click "Save as pipeline" to create one.`,noTarget:`No target printer set`,noTargetMessage:`This pipeline has no target printer set. Open it in Settings to pick one.`,copies:`Copies`,copiesHint:`max {{n}}`,classTarget:`Any {{model}}`,toast:{started:`Pipeline run started`,failed:`Could not start run`},issue:{printerNotSet:`No target printer set on this pipeline.`,printerNotFound:`Target printer no longer exists.`,printerDisabled:`Target printer is disabled.`,printerOffline:`Target printer is offline.`,filamentType:`Filament slot {{slot}}: expected {{expected}}, AMS has {{actual}}`,filamentColor:`Filament slot {{slot}}: colour differs (expected {{expected}}, AMS has {{actual}})`,amsSlotMissing:`AMS slot {{slot}} not available on this printer`,filamentUnverified:`Filament slot {{slot}} comes from a cloud / standard preset and could not be statically verified.`,noClassMatches:`No printers in this install match the pipeline's target model class ({{expected}}).`,classNotSet:`Pipeline target is set to a printer class but no model was chosen.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Showing slicer defaults: your slicer sidecar is older than this feature and can't report a preset's values. Update the sidecar image to see them. Anything you don't change still uses the preset.`,presetValuesNotConfigured:`Showing slicer defaults: no slicer sidecar is configured, so a preset's values can't be read. Anything you don't change still uses the preset.`,presetValuesSidecarUnavailable:`Showing slicer defaults: the slicer sidecar did not answer, so a preset's values can't be read. Anything you don't change still uses the preset.`,presetValuesUnavailable:`Showing slicer defaults: the picked preset's own values could not be read. Anything you don't change still uses the preset.`,filamentDefault:`Default`,fromFile:`from file`,fromFileHint:`The designer changed this in the source file. Its value is {{value}}.`,fromFilePrinterCoupled:`designer's printer`,fromFilePrinterCoupledHint:`Tuned for the printer this file was designed for -- may be wrong or out of range on yours.`,fromFileOverridesPreset:`overrides preset`,fromFileOverridesPresetHint:`The file sets this to {{value}} where the preset you picked uses {{preset}}. Tick it only if the file should win.`,useFromFile:`Use the source file's value for {{option}}`,otherFromFile:`Other settings from this file`,fromFileSummary:`The designer changed {{count}} process settings in this file. Only the ones you tick are used.`,fromFileUseAll:`Use the designer's settings`,fromFileUseAllHint:`Ticks the settings that carry across printers. The ones tuned for the designer's own printer, and the ones that define the preset you picked, stay off.`,fromFileClear:`Clear {{count}}`,loading:`Loading slicer settings…`,mode:{simple:`Simple`,advanced:`Advanced`,expert:`Expert`},searchPlaceholder:`Search settings`,resetAll:`Reset {{count}}`,resetOption:`Reset to default`,noMatches:`No settings match this search.`},slice:{filamentSlotUnset:`not set`,processSettingsEmbedded:`Not used while "Use the file's built-in settings" is on -- the file's own settings drive this slice.`,processSettingsInactive:`Inactive`,presetsHidden:`{{count}} hidden`,showAllPresets:`Show all`,showFewerPresets:`Show fewer`,processSettings:`Process settings`,processSettingsHint:`Adjust the picked preset for this slice. Anything you don't touch stays as the preset defines it.`,processSettingsChanged:`{{count}} changed`,processSettingsUnchanged:`Preset defaults`,title:`Slice model`,action:`Slice`,actionAll:`Slice all {{count}} plates`,actionAllTitle:`Slice every plate into one multi-plate output (single archive). Filament selection covers every slot the project defines.`,allPlatesToggle:`Slice all {{count}} plates`,slicing:`Slicing…`,printer:`Printer profile`,process:`Process profile`,filament:`Filament profile`,filamentSlot:`Filament {{index}} ({{type}})`,filamentColour:`Filament colour`,selectPreset:`— Select a preset —`,loadingPresets:`Loading presets…`,analyzingPlateFilaments:`Analyzing plate filaments…`,analyzingPlateFilamentsHint:`Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.`,previewToast:`Analyzing {{name}} — {{elapsed}}`,previewWithProgress:`Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— not used by this plate`,noPresetsForSlot:`No presets available`,otherPrinters:`Other printers`,presetsLoadFailed:`Failed to load presets. Open Settings → Profiles to import them first.`,refreshPresets:`Refresh`,refreshPresetsTitle:`Refresh presets — fetch the latest cloud and bundled listings (use after deleting a preset in Bambu Studio or Bambu Handy)`,allPresetsRequired:`All presets must be selected`,useEmbedded:`Use the file's built-in settings`,useEmbeddedHint:`Slice it the way the designer set it up (walls, infill, filament) instead of the profiles above. Offered because your printer matches the file's.`,autoOrient:`Auto-orient objects`,autoOrientHint:`Let the slicer turn each object onto its best printing side first. Overrides the way the model was laid down in the file.`,autoArrange:`Auto-arrange on the plate`,autoArrangeHint:`Let the slicer position the objects so they no longer overlap. Replaces the layout the file came with.`,enqueuing:`Submitting slice job…`,queued:`Queued…`,failed:`Slicing failed. Check the slicer sidecar logs.`,startedToast:`Slicing {{name}} in the background…`,queuedToast:`Queued: {{name}} — {{elapsed}}`,runningToast:`Slicing {{name}} — {{elapsed}}`,runningWithProgress:`{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,runningWithProgressMultiPlate:`Plate {{plateIndex}} of {{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,completedToast:`Sliced {{name}}`,externalWriteFallbackToast:`Saved to the internal library: the external folder could not be written to`,failedTitle:`Slicing failed`,failedToast:`Slicing {{name}} failed: {{detail}}`,tier:{local:`Imported`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Standard`},cloud:{notAuthenticated:`Sign in to Bambu Cloud (Settings → Profiles → Bambu Cloud) to see your cloud presets.`,expired:`Bambu Cloud session expired — sign in again to refresh your cloud presets.`,unreachable:`Bambu Cloud is unreachable right now. Local and standard presets still work.`},orcaCloud:{notAuthenticated:`Sign in to Orca Cloud (Profiles → Orca Cloud) to see your Orca presets.`,expired:`Orca Cloud session expired — sign in again to refresh your Orca presets.`,unreachable:`Orca Cloud is unreachable right now. Other presets still work.`},bedType:{label:`Build plate`,auto:`Auto (use process preset)`,coolPlate:`Cool Plate`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`},pipelines:{label:`Pipeline`,applyAria:`Apply pipeline`,applyPrompt:`Apply pipeline…`,empty:`No saved pipelines`,saveButton:`Save as pipeline`,saveTitle:`Save the current four-slot selection as a reusable pipeline`,namePlaceholder:`Pipeline name`,nameAria:`New pipeline name`,toast:{applied:`Applied "{{name}}"`,saved:`Pipeline saved`,saveFailed:`Save failed`}}},spoolman:{title:`Spoolman Integration`,enabled:`Spoolman Enabled`,url:`Spoolman URL`,connected:`Connected`,disconnected:`Not Connected`,testConnection:`Test Connection`,sync:`Sync`,syncing:`Syncing...`,lastSync:`Last Sync`,linkToSpoolman:`Link to Spoolman`,openInSpoolman:`Open in Spoolman`,unlinkSpool:`Unlink Spool`,unlinkConfirmTitle:`Unassign Spool?`,unlinkConfirmMessage:`This will remove the spool from this slot. The spool data itself will remain unchanged.`,selectSpool:`Select Spool`,noUnlinkedSpools:`No unassigned spools available`,linkSuccess:`Spool assigned successfully`,linkFailed:`Failed to assign spool`,unlinkSuccess:`Spool unassigned successfully`,unlinkFailed:`Failed to unassign spool`,linkedSpool:`Assigned spool`,spoolId:`Spool ID`,fillSourceLabel:`(Spoolman)`,weight:`Weight`,remaining:`Remaining`,disableWeightSync:`Disable AMS Estimated Weight Sync`,disableWeightSyncDesc:`Don't update remaining capacity from AMS estimates. Use this if you prefer Spoolman's usage tracking over AMS percentage-based estimates. New spools will still use the AMS estimate as their initial weight.`,reportPartialUsage:`Report Partial Usage for Failed Prints`,reportPartialUsageDesc:`When a print fails or is cancelled, report the estimated filament used up to that point based on layer progress.`},locations:{title:`Storage Locations`,subtitle:`Manage shelves, drawers, and other physical storage spots for your spools`,add:`Add Location`,addShort:`Add`,edit:`Edit Location`,name:`Name`,spools:`Spools`,sensors:`Sensors`,empty:`No storage locations yet. Create your first shelf or drawer.`,manage:`Locations`,createPlaceholder:`e.g. Shelf A, Drawer 1`,nameRequired:`Location name is required`,created:`Location created`,updated:`Location updated`,deleted:`Location deleted`,saveFailed:`Failed to save location`,deleteFailed:`Failed to delete location`,deleteBlocked:`Remove all spools from this location before deleting`,confirmDelete:`Delete "{{name}}"?`,confirmDeleteMessage:`This location will be removed from the catalog. Spools must be moved first.`,confirmDeleteMessageWithSensors:`This location will be removed from the catalog. Spools must be moved first. Connected sensors will also be deleted.`},inventory:{title:`Spool Inventory`,subtitle:`Manage your spools`,addToInventory:`Add to Inventory`,addToInventoryPending:`Adding...`,addToInventorySuccess:`Spool added to inventory`,addToInventoryFailed:`Failed to add spool to inventory`,unknownSpoolTitle:`New filament detected`,unknownSpoolMessage:`A spool with an unknown RFID tag was detected at {{location}}. Add it to your inventory now?`,unknownSpoolSlot:`Slot`,bulk:{selectAllVisible:`Select all visible`,selectRow:`Select row`,selectGroup:`Select group`,selectionCount:`{{count}} selected`,edit:`Edit`,printLabels:`Print labels`,resetUsage:`Reset usage`,restore:`Restore`,archive:`Archive`,delete:`Delete`,clearSelection:`Clear selection`,editTitle:`Bulk edit spools`,editSubtitle:`Applies to {{count}} selected spools. Only fields you tick get updated.`,editHint:`Type into a field to mark it for update — only ticked rows are sent. Leaving a field empty leaves the spools unchanged (clearing fields is per-spool only).`,useCustom:`Use "{{value}}"`,toggleField:`Toggle update for this field`,changeCount:`{{count}} fields will be updated.`,applyPending:`Applying...`,applyButton:`Apply to {{count}} spools`,deleteTitle:`Delete selected spools`,archiveTitle:`Archive selected spools`,restoreTitle:`Restore selected spools`,resetUsageTitle:`Reset usage on selected spools`,deleteMessage:`Permanently delete {{count}} spools? This cannot be undone.`,archiveMessage:`Archive {{count}} spools? They can be restored later.`,restoreMessage:`Restore {{count}} archived spools?`,resetUsageMessage:`Reset the "Total Consumed" counter on {{count}} spools? Remaining weight is preserved.`,updateSuccess:`{{count}} spools updated`,updateFailed:`Bulk update failed`,updatePartial:`{{ok}} spools updated, {{failed}} failed`,updateAllFailed:`All {{count}} spool updates failed — selection kept so you can retry`,deleteSuccess:`{{count}} spools deleted`,deleteFailed:`Bulk delete failed`,deletePartial:`{{ok}} spools deleted, {{failed}} failed`,deleteAllFailed:`All {{count}} spool deletions failed — selection kept so you can retry`,archiveSuccess:`{{count}} spools archived`,archiveFailed:`Bulk archive failed`,archivePartial:`{{ok}} spools archived, {{failed}} failed`,archiveAllFailed:`All {{count}} spool archives failed — selection kept so you can retry`,restoreSuccess:`{{count}} spools restored`,restoreFailed:`Bulk restore failed`,restorePartial:`{{ok}} spools restored, {{failed}} failed`,restoreAllFailed:`All {{count}} spool restores failed — selection kept so you can retry`,invalidHex:`Enter 6 hex characters (RRGGBB) or 8 (RRGGBBAA). The field will not be applied otherwise.`},spoolmanMixedContentTitle:`Spoolman can't load over HTTPS — mixed-content blocked by your browser`,spoolmanMixedContentBody:`Bambuddy is served over HTTPS (via your reverse proxy), but your Spoolman URL is still plain HTTP. Browsers block mixed content for security, so the embedded Spoolman UI can't render. Spoolman needs to be reachable over HTTPS for this to work.`,spoolmanMixedContentFixReverseProxy:`Put Spoolman behind the same reverse proxy as Bambuddy (Traefik / Nginx / Caddy) with HTTPS, then update the Spoolman URL in Settings to the new HTTPS address.`,spoolmanMixedContentFixOpenNewTab:`As a workaround, open Spoolman in a new browser tab over HTTP — mixed-content rules only apply to embedded frames, so a standalone tab still works.`,spoolmanOpenInNewTab:`Open Spoolman in a new tab`,labels:{title:`Print spool labels`,selectedCount:`{{count}} selected`,pickSpools:`Pick which spools to print labels for:`,monochrome:`Monochrome (black & white printer)`,monochromeHint:`Drops the colour swatch and widens the text`,startingPosition:`Starting label position`,startingPositionRange:`Sheet templates only: L7160 supports 1–21; 5160 supports 1–30.`,startingPositionInvalid:`Enter a whole number from 1 to {{capacity}}.`,startingPositionFirst:`Printing starts at position 1.`,startingPositionSkipped:`Positions 1 through {{lastPosition}} will be left blank on the first sheet.`,startingPositionRangeError:`Starting position must be between 1 and {{capacity}} for this sheet.`,searchPlaceholder:`Search name, brand, or #ID`,filterByMaterial:`Material:`,allMaterials:`All`,selectVisible:`Select all visible ({{count}})`,deselectVisible:`Deselect visible`,clearAll:`Clear all`,noSpoolsToShow:`No spools to show. Adjust your filter and try again.`,noMatches:`No spools match the current search or filter.`,printOne:`Print label for this spool`,printLabels:`Print labels…`,bulkTitle:`Pick spools to print labels for from the {{count}} currently shown`,noSpoolsTitle:`No spools to label`,error:`Could not generate labels: {{msg}}`,sortBy:{label:`Sort:`,id:`By ID`,color:`By colour`},templates:{amsHolderSmall:{label:`AMS holder — small (74 × 33 mm)`,hint:`Single label per page; matches the printable label from MakerWorld model 752566 (AMS Filament Label Holder).`},amsHolderLarge:{label:`AMS holder — large (75 × 55 mm)`,hint:`Single label per page; fits the cardstock-insert variant of the AMS Filament Label Holder. Roomy enough for swatch, brand, material, ID, and QR code.`},box40x30:{label:`Box label (40 × 30 mm)`,hint:`Single label per page; common DK/Brother roll size, good for filament-bag and storage-bin labels.`},box:{label:`Box label (62 × 29 mm)`,hint:`Single label per page; sized for Brother PT/QL and Dymo small labels.`},averyL7160:{label:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,hint:`EU sheet stock; 21 labels per A4 page.`},avery5160:{label:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,hint:`US sheet stock; 30 labels per Letter page.`}}},csv:{importButton:`Import CSV`,exportButton:`Export CSV`,modalTitle:`Import spools from CSV`,selectFile:`Choose a CSV file or drag it here`,dragHint:`Header: material (required), brand, subtype, color_name, rgba, …`,parsing:`Reading file…`,previewError:`Could not read the CSV file`,validCount:`{{count}} valid`,errorCount:`{{count}} error`,skippedCount:`{{count}} skipped`,colRow:`Row`,colStatus:`Status`,colColor:`Color`,colorResolved:`Color filled from catalog`,colorCrossMaterial:`Color taken from a different material — no exact match in catalog`,duplicateExisting:`A spool with this material, brand and color already exists — it will still be imported as a new spool`,spoolmanHint:`In Spoolman mode, use Spoolman's built-in CSV import/export.`,importValidRows:`Import {{count}} valid rows`,noValidRows:`No valid rows`,importing:`Importing…`,importSuccess:`{{count}} spools imported`,importError:`Import failed`,exportError:`Export failed`},addSpool:`Add Spool`,editSpool:`Edit Spool`,copySpool:`Copy Spool`,material:`Material`,selectMaterial:`Select material...`,subtype:`Subtype`,brand:`Brand`,searchBrand:`Search brand...`,useCustomBrand:`Use "{{brand}}"`,useCustomMaterial:`Use custom material: {{material}}`,suggestedOptions:`Suggested`,allOptions:`All`,colorName:`Color Name`,colorNamePlaceholder:`Jade White, Fire Red...`,color:`Color`,hexColor:`Hex Color`,pickColor:`Pick custom color`,labelWeight:`Label Weight`,coreWeight:`Empty Spool Weight`,searchSpoolWeight:`Search spool weight...`,weightUsed:`Used`,currentWeight:`Remaining Weight`,measuredWeight:`Measured Weight`,spoolName:`Spool`,costPerKg:`Cost per kg`,storageLocation:`Storage Location`,temperature:`Temperature`,humidity:`Humidity`,battery:`Battery`,storageLocationPlaceholder:`e.g. Shelf A, Drawer 1`,openInInventory:`Open in Inventory`,measuredWeightError:`Measured weight must be between {{min}}g and {{max}}g.`,slicerFilament:`Slicer Filament`,slicerFilamentName:`Slicer Preset Name`,slicerPreset:`Slicer Preset`,searchPresets:`Search filament presets...`,selectedPreset:`Selected`,noPresetsFound:`No presets found`,tempOverrides:`Temperature Overrides`,note:`Note`,notePlaceholder:`Any additional notes about this spool...`,category:`Category`,categoryPlaceholder:`e.g. Production, Prototype, Client A`,categoryNone:`Uncategorized`,storageLocationNone:`No location set`,lowStockThresholdOverride:`Low-stock threshold (this spool)`,lowStockThresholdOverrideHelp:`Leave blank to use the global threshold ({{global}}%).`,clearRfid:`Clear RFID Tag`,rfidCleared:`RFID tag cleared`,archive:`Archive`,restore:`Restore`,noSpools:`No spools yet. Add your first spool to get started.`,noAvailableSpools:`No spools available. Add a spool to your inventory or unassign one from another slot first.`,kProfiles:`K-Profiles`,addKProfile:`Add K-Profile`,assignSpool:`Assign Spool`,unassignSpool:`Unassign`,assignSuccess:`Spool assigned and AMS slot configured`,assignPendingInsert:`Assigned. Slot will configure when you insert the spool.`,assignFailed:`Failed to assign spool`,selectSpool:`Select a spool to assign to this slot`,assigned:`Assigned`,assigning:`Assigning...`,searchSpools:`Search spools...`,showAllSpools:`Show all spools`,spoolmanSpools:`Spoolman Spools`,allMaterials:`All Materials`,filterByBrand:`Filter by brand...`,showArchived:`Show archived`,quickAdd:`Quick Add (Stock)`,quantity:`Quantity`,stock:`Stock`,configured:`Configured`,spoolsCreated:`{{count}} spools created`,spoolsPartiallyCreated:`{{created}} of {{total}} spools created (some failed)`,spoolCreated:`Spool created`,spoolUpdated:`Spool updated`,spoolDeleted:`Spool deleted`,deepLinkSpoolNotFound:`Spool not found`,deepLinkFetchFailed:`Could not load spool — try again`,spoolArchived:`Spool archived`,spoolRestored:`Spool restored`,kProfileSaveFailed:`K-profile settings could not be saved`,syncWeightSpoolNotFound:`Spool not found — it may have been deleted`,syncWeightSpoolmanUnreachable:`Spoolman is unreachable — try again later`,syncWeightFailed:`Failed to sync weight`,spoolmanUnreachable:`Spoolman is not reachable — please try again later`,deleteSpoolNotFound:`Spool not found — it may have already been deleted`,deleteFailed:`Failed to delete spool`,archiveSpoolNotFound:`Spool not found — it may have already been deleted`,archiveFailed:`Failed to archive spool`,restoreSpoolNotFound:`Spool not found — it may have already been deleted`,restoreFailed:`Failed to restore spool`,saveFailed:`Failed to save changes`,tagClearFailed:`Failed to clear tag`,deleteConfirm:`Are you sure you want to delete this spool? This cannot be undone.`,archiveConfirm:`Are you sure you want to archive this spool?`,advancedSettings:`Advanced Settings`,filamentInfoTab:`Filament Info`,paProfileTab:`PA Profile`,colorAndCostTab:`Color & Cost`,printersTab:`Printers`,filamentInfo:`Filament`,additional:`Additional`,loadingPresets:`Loading cloud presets...`,cloudConnected:`Cloud connected`,cloudNotConnected:`Cloud not connected (using defaults)`,recentColors:`Recent`,searchColors:`Search colors...`,searchResults:`Search results`,allColors:`All colors`,commonColors:`Common colors`,showLess:`Show less`,showAll:`Show all`,noColorsFound:`No colors match your search`,noResults:`No matches found`,extraColorsLabel:`Extra colors`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Paste 2 to 8 hex stops, separated by commas. Renders as a gradient.`,extraColorsInvalid:`Ignored invalid hex: {{tokens}}`,colorEffectLabel:`Effect`,colorEffect:{none:`None`,sparkle:`Sparkle`,wood:`Wood`,marble:`Marble`,glow:`Glow`,matte:`Matte`,silk:`Silk`,galaxy:`Galaxy`,rainbow:`Rainbow`,metal:`Metal`,translucent:`Translucent`,gradient:`Gradient`,dualColor:`Dual Color`,triColor:`Tri Color`,multicolor:`Multicolor`},selectMaterialFirst:`Please select a material first in the Filament Info tab.`,noPrintersConfigured:`No printers configured. Add printers to use PA profiles.`,matchingFilter:`Matching`,anyBrand:`Any brand`,anyVariant:`Any variant`,autoSelect:`Auto-select`,matches:`matches`,match:`match`,noMatches:`No matches`,connected:`Connected`,offline:`Offline`,printerOffline:`Printer is offline. Connect to view calibration profiles.`,noKProfilesMatch:`No K-profiles match the selected filament.`,leftNozzle:`Left Nozzle`,rightNozzle:`Right Nozzle`,profilesSelected:`calibration profile(s) selected`,filamentPreset:`Filament preset`,presetUseSpoolDefault:`Use the spool's preset`,presetInherited:`inherited`,presetOverride:`override`,presetNeedsModel:`This printer has not reported its model yet, so it cannot have its own preset.`,autoMatchPresets:`Auto-match`,autoMatchPresetsHint:`Find the variant of this spool's preset that names each model`,kProfilesPerPrinter:`K profiles`,kProfileNotSet:`Not set`,kProfileFlowMismatch:`This profile was measured on a {{profile}} nozzle but a {{fitted}} nozzle is fitted, so it will not be applied`,nozzle:`Nozzle`,unknownModel:`Unknown model`,onePrinter:`1 printer`,nPrinters:`{{n}} printers`,filamentPresetsLoadFailed:`Could not load this spool's per-model presets`,filamentPresetSaveFailed:`Could not save the per-model presets`,totalInventory:`Total Inventory`,totalConsumed:`Total Consumed`,byMaterial:`By Material`,inPrinter:`In Printer`,lowStock:`Low Stock`,sinceTracking:`Since tracking started`,resetConsumedCounter:`Reset counter`,resetConsumedCounterTooltip:`Zero the consumed-grams counter for this spool. Remaining weight is not changed.`,resetConsumedCounterConfirm:`Reset this spool's consumed-grams counter to 0? Future prints will track from zero again. The spool itself, its remaining weight calculation, and your settings are not changed.`,resetAllConsumedCounters:`Reset all counters`,resetAllConsumedCountersTooltip:`Zero the consumed-grams counter on every spool. Remaining weights are not changed.`,resetAllConsumedCountersConfirm:`Reset the consumed-grams counter to 0 on all {{count}} spools (archived ones included)? This clears the "Total Consumed" stat so future prints track from zero. Spools and remaining weights are not changed.`,consumedCounterReset:`Counter reset`,allConsumedCountersReset:`Counter reset for {{count}} spool(s)`,resetConsumedCounterFailed:`Failed to reset counter`,loadedInAms:`Loaded in AMS/Ext`,remaining:`Remaining`,weightCheck:`Weight Check`,lastWeighed:`Last weighed`,neverWeighed:`Never weighed`,search:`Search spools...`,showing:`Showing`,to:`to`,of:`of`,show:`Show`,spools:`spools`,spool:`spool`,page:`Page`,noSpoolsMatch:`No results found`,noSpoolsMatchDesc:`Try adjusting your search or filters to find what you're looking for.`,active:`Active`,archived:`Archived`,all:`All`,used:`Used`,new:`New`,clearFilters:`Clear filters`,table:`Table`,cards:`Cards`,net:`Net`,groupSimilar:`Group`,groupedSpools:`{{count}} identical spools`,groupedRows:`rows`,columns:`Columns`,configureColumns:`Configure Columns`,configureColumnsDesc:`Drag to reorder columns or use arrows. Toggle visibility with the eye icon.`,visible:`visible`,reset:`Reset`,cancel:`Cancel`,applyChanges:`Apply Changes`,moveUp:`Move up`,moveDown:`Move down`,hideColumn:`Hide column`,showColumn:`Show column`,linkToSpool:`Link to Spool`,tagLinked:`Tag linked to spool`,tagLinkFailed:`Failed to link tag`,tagAlreadyLinked:`Tag already linked to spool #{{id}}`,unknownTag:`Unknown RFID tag detected`,usageHistory:`Usage History`,noUsageHistory:`No usage recorded yet`,printName:`Print Name`,weightConsumed:`Weight Consumed`,clearHistory:`Clear`,historyCleared:`Usage history cleared`,fillSourceLabel:`(Inv)`,lowStockThresholdError:`Threshold must be between 0.1 and 99.9`,assignMismatchTitle:`Material mismatch`,assignMismatchMessage:`The selected spool material "{{spoolMaterial}}" does not match the tray material "{{trayMaterial}}" for {{location}}. Assign anyway?`,assignMismatchConfirm:`Assign Anyway`,assignPartialMismatchMessage:`The spool material "{{spoolMaterial}}" is similar to but not exactly matching "{{trayMaterial}}" in {{location}}. Do you want to proceed?`,assignProfileMismatchMessage:`The spool profile "{{spoolProfile}}" does not match the tray profile "{{trayProfile}}" in {{location}}. Do you want to proceed?`,assignReconfigureNote:`The AMS slot will be reconfigured to use the spool's profile.`,spoolmanFilamentCatalog:`Spoolman Filament Catalog`,pickFromSpoolmanCatalog:`Pick from Spoolman catalog…`,spoolmanFilamentSelected:`Filament selected from Spoolman catalog`,spoolmanFilamentUnlinked:`Filament catalog link cleared`,noSpoolmanFilaments:`No filaments found in Spoolman catalog`,spoolmanFilamentColorSwatch:`Filament color`,spoolWeightManagedBySpoolman:`Empty spool weight is managed per filament type in Spoolman`,spoolmanCatalogLoadFailed:`Failed to load Spoolman filament catalog`},timelapse:{title:`Timelapse`,create:`Create Timelapse`,download:`Download`,delete:`Delete`,preview:`Preview`,frameRate:`Frame Rate`,quality:`Quality`,processing:`Processing...`,noTimelapses:`No timelapses available`},ams:{title:`AMS`,slot:`Slot`,empty:`Empty`,emptySlot:`Empty slot`,slotEmpty:`Empty`,slotUnconfigured:`?`,emptySlotReset:`No filament assigned`,unknown:`Unknown`,humidity:`Humidity`,temperature:`Temperature`,filamentType:`Filament Type`,filamentColor:`Color`,remaining:`Remaining`,history:`AMS History`,noHistory:`No history available`,configureSlot:`Configure Slot`,externalSpool:`External Spool`,profile:`Profile`,kFactor:`K Factor`,kFactorShort:`K`,fill:`Fill`,configure:`Configure`,used:`used`,remainingUnit:`remaining`},printModal:{variants:{editNote:`These alternatives were set when the job was queued. Cancel and re-queue to change them.`,title:`Printer alternatives`,help:`One job, one queue slot. The first matching printer to free up runs its file.`,unknownModel:`Unknown model`,plateFor:`Plate for {{filename}}`,moveUp:`Move up`,moveDown:`Move down`,queued:`Queued with {{count}} alternatives`},selectPrinter:`Select Printer`,selectPlate:`Select Plate`,filamentMapping:`Filament Mapping`,useArchiveMapping:`Mapping`,useArchiveMappingTooltip:`Select every slot from the AMS mapping saved with this archive (from the slicer), instead of matching by type/color.`,clickToChangeSlot:`Click to change slot assignment`,reRead:`Re-read`,plateN:`Plate {{n}}`,plateFilamentsUnreadable:`The filaments of a selected plate could not be read, so it can't be mapped. Deselect it to queue the others.`,totalCost:`Total cost:`,slotRemainingShort:` - {{grams}}g left`,printSettings:`Print Settings`,bedLeveling:`Bed Leveling`,flowCalibration:`Flow Calibration`,vibrationCalibration:`Vibration Calibration`,layerInspection:`First Layer Inspection`,timelapse:`Timelapse`,cancel:`Cancel`,noPrintersAvailable:`No printers available`,printerBusy:`Printer is busy`,printerOffline:`Printer is offline`,sameTypeDifferentColor:`Same type, different color`,filamentTypeNotLoaded:`Filament type not loaded`,statusReady:`Ready`,statusColorMismatch:`Color mismatch`,statusTypeNotFound:`Type not found`,requiredTooltip:`Required: {{name}} - {{color}}`,manuallySelected:`Manually selected`,autoMatched:`Auto-matched`,selectSlot:`Select slot`,sameTypeDifferentColorDetail:`Same type, different color: needs {{required}}, slot has {{loaded}}`,requiredTypeNotInPrinter:`Required filament type not found in printer.`,whenToPrint:`When to print`,asap:`ASAP`,queue:`Queue`,schedule:`Schedule`,dateTime:`Date & Time`,invalidDateTime:`Please enter a valid date and time`,openCalendar:`Open calendar`,requireManualStart:`Require manual start`,requirePreviousSuccess:`Only start if previous print succeeded`,autoOffAfter:`Power off printer when done`,helpAsap:`Print will be added to the top of the queue and start as soon as an eligible printer is idle.`,helpSchedule:`Print will start at the scheduled time if the printer is idle. If busy, it will wait until the printer becomes available.`,helpQueue:`Print will be added to the back of the queue.`,leftNozzle:`L`,rightNozzle:`R`,leftNozzleTooltip:`Left nozzle`,rightNozzleTooltip:`Right nozzle`,ftsSameInletHint:`All filaments for this print are on Filament Track Switch IN-{{inlet}}. Switching between filaments on the same inlet is slower — move one to an AMS on the other inlet to speed it up.`,rackPosition:`Rack position`,rackPositionTooltip:`Which nozzle on the rack prints this filament. Positions are numbered as on the printer.`,rackEmptyPosition:`This rack position is empty`,rackWrongNozzle:`Holds a {{has}} nozzle; this filament needs {{needs}}`,filamentOverride:`Filament Override`,filamentOverrideHint:`Optionally override filaments for model-based assignment. The scheduler will match against your selected filaments instead of the original 3MF values.`,originalFilament:`Original`,overrideWith:`Override with`,resetToOriginal:`Reset to original`,insufficientFilamentTitle:`Not enough filament`,waitingForAmsStatus:`Waiting for AMS status from {{printer}}…`,insufficientFilamentMessage:`Some assigned spools have less filament remaining than this print needs:`,insufficientFilamentLine:`{{printer}} - {{slot}}: needs {{required}}g, remaining {{remaining}}g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: needs {{required}}g, {{remaining}}g available across matching spools (AMS Filament Backup)`,printAnyway:`Print anyway`,forceColorMatch:`Force color match`,staggerPrinterStarts:`Stagger printer starts`,staggerGroupSize:`Group size`,staggerInterval:`Interval (min)`,staggerPreview:`{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min`,staggerLastGroup:`last group: {{count}}`,staggerTotal:`total: {{minutes}} min`,staggerToPrinters:`Stagger to {{count}} printers`,gcodeInjection:`Inject auto-print G-code`,insufficientBudget:`Insufficient Budget`,unlimitedNoBudget:`Unlimited – no budget limit is set.`,noPrintableCostCenters:`No active cost center is available for printing. Ask an administrator to grant you print access.`},backup:{includesEncryptionKey:`Local backups include the MFA encryption key file (DATA_DIR/.mfa_encryption_key) so a backup ZIP is self-contained. Treat the ZIP as sensitive — anyone with the file can decrypt the OIDC client secrets and TOTP secrets stored inside.`,title:`Backup & Restore`,createBackup:`Create Backup`,restoreBackup:`Restore Backup`,restoreDescription:`Replace all data from a backup file`,downloadBackup:`Download Backup`,uploadBackup:`Upload Backup`,lastBackup:`Last Backup`,autoBackup:`Auto Backup`,backupNow:`Backup Now`,restoreWarning:`Warning: Restoring a backup will overwrite all current data.`,includeArchives:`Include Archives`,includeSettings:`Include Settings`,includeProfiles:`Include Profiles`,backupSuccess:`Backup created successfully`,restoreSuccess:`Backup restored successfully`,backupFailed:`Backup failed`,restoreFailed:`Restore failed`,restoreNote:`Virtual Printer will be stopped during restore`,githubBackup:`Git Backup`,enabled:`Enabled`,cloudLoginRequired:`Bambu Cloud login required. Sign in under Profiles → Cloud Profiles to enable GitHub backup.`,cloudLoginRequiredShort:`Cloud login required`,githubDescription:`Automatically sync your profiles to a private GitHub repository for backup and version history.`,repoIsPrivate:`Repository is private — safe to back up to.`,repoIsPublicWarning:`Repository is PUBLIC. Bambuddy backups include MQTT credentials, Home Assistant tokens, Prometheus tokens, your Bambu Cloud email, and printer access codes via K-profiles. Saving is blocked until you make the repository private in your provider's settings.`,repoVisibilityUnknown:`Could not determine repository visibility. Bambuddy refuses to back up to anything not confirmed private; saving will be blocked.`,repositoryUrl:`Repository URL`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Allow insecure HTTP`,allowInsecureHttpHint:`Enable for self-hosted instances on private networks without TLS`,personalAccessToken:`Personal Access Token`,tokenSaved:`(saved)`,enterNewToken:`Enter new token to update`,tokenHintGitHub:`Fine-grained token with Contents read and write access, or a classic token with the repo scope.`,tokenHintGitLab:`Token with the api scope, or read_repository and write_repository together.`,tokenHintGitea:`Token with the write:repository scope.`,tokenHintForgejo:`Token with the write:repository scope. A token limited to this one repository is enough.`,branch:`Branch`,provider:`Git Provider`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Manual only`,hourly:`Hourly`,daily:`Daily`,weekly:`Weekly`,includeInBackup:`Include in backup`,kProfiles:`K-Profiles`,kProfilesDescription:`Pressure advance calibration from connected printers`,noPrintersConnected:`No printers connected`,printersConnected:`{{connected}}/{{total}} connected`,cloudProfiles:`Cloud Profiles`,cloudProfilesDescription:`Filament, printer, and process presets from Bambu Cloud and Orca Cloud`,cloudProfilesAccounts:`Connected accounts — Bambu Cloud: {{bambu}}, Orca Cloud: {{orca}}`,appSettings:`App Settings`,appSettingsDescription:`Bambuddy configuration (complete database)`,spoolInventory:`Spool Inventory`,spoolInventoryDescription:`Filament spools, usage history, and cost tracking`,printArchives:`Print Archives`,printArchivesDescription:`Print history metadata (no gcode/3MF files)`,lastBackupAt:`Last backup:`,noBackupsYet:`No backups yet`,next:`Next:`,startingBackup:`Starting backup...`,test:`Test`,enableBackup:`Enable Backup`,testConnection:`Test Connection`,enterRepoUrl:`Enter repository URL`,enterRepoAndToken:`Enter repository URL and access token`,repoRequired:`Repository URL is required`,tokenRequired:`Access token is required`,githubBackupEnabled:`GitHub backup enabled`,tokenUpdated:`Token updated`,settingsSaved:`Settings saved`,failedToSave:`Failed to save: {{message}}`,backupCompleteFiles:`Backup complete - {{count}} files updated`,backupSkippedNoChanges:`Backup skipped - no changes`,backupFailed2:`Backup failed: {{message}}`,clearedLogs:`Cleared {{count}} logs`,failedToClearLogs:`Failed to clear logs: {{message}}`,restoreFromGit:{button:`Restore from Git`,title:`Restore from Git Backup`,subtitle:`Pick a commit and choose what to restore`,commitLabel:`Backup commit`,latestCommit:`Latest backup (branch tip)`,categoriesLabel:`What to restore`,inspecting:`Reading backup contents...`,itemCount:`{{count}} in backup`,overwriteLabel:`Overwrite existing entries`,overwriteOn:`Existing entries will be updated from the backup.`,overwriteOff:`Only missing entries are added; existing ones are left untouched.`,selectedCount:`{{count}} selected`,restoring:`Restoring...`,confirmTitle:`Restore from backup?`,confirmMessage:`The selected categories will be restored from this commit. Missing entries are added; existing entries stay as they are.`,confirmMessageOverwrite:`The selected categories will be restored from this commit, overwriting entries that already exist locally. This cannot be undone.`,kprofilesOverwriteCaveat:`K-profiles are the exception: writing a slot always replaces the calibration on the printer.`,tally:`{{restored}} restored, {{skipped}} skipped, {{failed}} failed`,reloadHint:`Reload Bambuddy so the restored data appears everywhere.`,partialHint:`The categories listed above finished and are on disk. Any that are missing did not run.`,failed:`Restore failed.`,loadFailed:`Could not read the backup repository.`,details:{notPresent:`Not present in this backup commit`,unreadableJson:`Unreadable JSON: {{paths}}`,settingsNoPayload:`No settings in payload`,settingsCredentialsWillSkip:`{{count}} credential-like key(s) will be skipped`,settingsCompanionWillSkip:`{{count}} credential-like key(s) will be skipped, and {{companion}} switch(es) that depend on them will be left off`,settingsCompanionOnlyWillSkip:`{{companion}} switch(es) will be left off - the credential each one needs cannot be restored from a backup`,spoolsUsageCount:`including {{count}} usage record(s)`,archivesMetadataOnly:`Metadata only - 3MF files and thumbnails are not in a Git backup`,kprofilesPrinterCount:`across {{count}} printer(s)`},notes:{noData:`No data of this kind in this backup`,archivesPrinterMissing:`Some archives referenced printers that no longer exist - link cleared`,archivesProjectMissing:`Some archives referenced projects that no longer exist - link cleared`,archivesOwnerCleared:`Some archives referenced users that no longer exist - owner cleared, so they are visible only to users with the archives:read_all permission until an admin reassigns them`,archivesOwnerUnmatched:`Some archives name an owner this instance does not have - owner cleared rather than guessed from the backup's user id, so they are visible only to users with the archives:read_all permission until an admin reassigns them`,archivesOwnerUnknown:`Some archives were restored without an owner - this backup does not record one, so they are visible only to users with the archives:read_all permission until an admin reassigns them`,archivesUndeleted:`Archive(s) deleted since the backup are visible again - overwrite was on`,archivesMetadataOnly:`Restored archives carry metadata only - the 3MF and thumbnail files are not in a Git backup`,spoolUsageUnresolved:`{{count}} usage record(s) skipped - their spool is not in this backup's spool list, so there is nothing to attach them to.`,spoolUsageUnlinked:`{{count}} usage record(s) restored without their print-history link - select Print archives alongside Spool inventory to keep it.`,spoolTagKept:`{{count}} spool tag(s) left as they are - the backup would have cleared a tag that has since been scanned, or moved one onto a second spool.`,settingsCredentialsSkipped:`{{count}} credential-like key(s) skipped - re-enter secrets manually`,settingsAuthSkipped:`{{count}} authentication setting(s) skipped - change those in Settings > Authentication so the lockout checks still run`,settingsCompanionSkipped:`{{keys}} left switched off - the credential each one needs cannot be restored from a backup and this instance has none stored, so switching them on would leave the integration unauthenticated`,settingsMqttRelayFailed:`MQTT settings restored, but the relay could not be reconnected - restart Bambuddy`,kprofilesAlwaysOverwrite:`K-profiles always overwrite the matching slot on the printer`,kprofilesAckUnreliable:`A printer that does not answer still counts as restored - verify the profiles on the printer`,kprofilesPrinterMissing:`No printer with serial {{serial}} - skipped`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) is not connected - skipped`,kprofilesUnknownNozzle:`Unexpected nozzle diameter {{nozzle}} for {{serial}} - sent as-is`,kprofilesUnmatched:`{{count}} profile(s) for {{nozzle}} had no counterpart on {{printer}} - added as new profiles`,kprofilesSendFailed:`Failed to send {{nozzle}} profiles to {{printer}} ({{serial}})`,kprofilesRefused:`{{printer}} ({{serial}}) refused the {{nozzle}} profiles: {{reason}}`,kprofilesStepFailed:`The K-profile step could not be completed - {{reason}}. Anything restored before it is still saved.`}},history:`History`,clear:`Clear`,date:`Date`,status:`Status`,trigger:`Type`,triggers:{manual:`Backup (manual)`,scheduled:`Backup (scheduled)`,restore:`Restore`},commit:`Commit`,localBackup:`Local Backup`,localBackupDescription:`Create a complete backup of your Bambuddy data including the database, archives, uploads, and all files.`,downloadBackupLabel:`Download Backup`,completeBackupZip:`Complete backup: database + all files (ZIP)`,download:`Download`,preparingBackup:`Preparing backup...`,creatingArchive:`Creating backup archive... This may take a while for large archives.`,downloadingFile:`Downloading backup file...`,backupDownloaded:`Backup downloaded successfully`,failedToCreateBackup:`Failed to create backup: {{message}}`,restore:`Restore`,restoreReplacesAll:`Restore replaces all data.`,restoreReplacesAllDetail:`Your current database and files will be completely replaced. A restart is required after restore.`,restoreConfirmTitle:`Restore Backup`,restoreConfirmMessage:`Are you sure you want to restore from "{{filename}}"? This will completely replace your current database and all files. The application will need to be restarted after restore.`,restoreConfirmButton:`Restore Backup`,uploadingFile:`Uploading backup file...`,backupRestoredRestart:`Backup restored. Please restart Bambuddy.`,failedToRestore:`Failed to restore backup. Please check the file format.`,reloadNow:`Reload Now`,creatingBackup:`Creating Backup`,restoringBackup:`Restoring Backup`,preparing:`Preparing...`,processing:`Processing...`,doNotClosePage:`Please do not close this page or navigate away. This operation may take several minutes for large backups.`,restoring:`Restoring...`,restoreComplete:`Restore Complete`,restoreFailed2:`Restore Failed`,importSettings:`Import settings from a backup file`,pleaseWaitRestoring:`Please wait while your data is being restored`,selectBackupFile:`Click to select backup file (.json or .zip)`,duplicateHandling:`How duplicate handling works:`,matchPrinters:`Printers`,matchPrintersBy:`matched by serial number`,matchSmartPlugs:`Smart Plugs`,matchSmartPlugsBy:`matched by IP address`,matchNotificationProviders:`Notification Providers`,matchNotificationProvidersBy:`matched by name`,matchFilaments:`Filaments`,matchFilamentsBy:`matched by name + type + brand`,matchArchives:`Archives`,matchArchivesBy:`matched by content hash (always skipped)`,matchPendingUploads:`Pending Uploads`,matchPendingUploadsBy:`matched by filename`,matchSettingsTemplates:`Settings & Templates`,matchSettingsTemplatesBy:`always overwritten`,replaceExisting:`Replace existing data`,keepExisting:`Keep existing data`,overwriteDescription:`Overwrite items that already exist with backup data`,keepDescription:`Only restore items that don't already exist`,overwriteCaution:`Caution:`,overwriteWarning:`Overwriting will replace your current configurations with data from the backup. Printer access codes are never overwritten for security.`,cancel:`Cancel`,processingBackup:`Processing backup file...`,itemsRestored:`Items Restored`,itemsSkipped:`Items Skipped`,restored:`Restored`,skippedAlreadyExist:`Skipped (already exist)`,filesCategory:`Files (3MF, thumbnails, etc.)`,andMore:`...and {{count}} more`,newApiKeysGenerated:`New API Keys Generated`,keysShownOnce:`These keys are only shown once. Copy them now!`,copy:`Copy`,noDataFound:`No data was found to restore in the backup file.`,close:`Close`,scheduledBackup:`Scheduled Backups`,scheduledBackupDescription:`Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.`,frequency:`Frequency`,backupTime:`Time`,retention:`Retention`,retentionDescription:`Number of backups to keep`,outputPath:`Output Path`,outputPathPlaceholder:`Default: {{path}}`,outputPathDescription:`Leave empty for default location`,runNow:`Run Now`,backupFiles:`Backup Files`,noScheduledBackups:`No backups yet`,deleteBackup:`Delete`,deleteBackupConfirm:`Delete this backup file?`,backupRunning:`Backup in progress...`,scheduledBackupComplete:`Backup completed successfully`,scheduledBackupFailed:`Backup failed`,nextBackup:`Next backup`,backupSize:`Size`,localTimeHint:`Local time ({{tz}})`,defaultPathLabel:`Default:`,pathCheck:{title:`Bambuddy cannot write to this directory`,howToFix:`How to fix:`,sandboxed:`The Bambuddy service cannot write to {{path}}. Its systemd unit runs with ProtectSystem=strict, which makes every directory outside the install, data and log directories read-only for the service - even one you can write to from your own shell.`,read_only:`{{path}} is on a read-only filesystem.`,permission_denied:`Bambuddy is not allowed to write to {{path}}. Check the directory owner and permissions.`,no_space:`The filesystem holding {{path}} is full.`,not_a_directory:`{{path}} exists but is not a directory.`,missing:`{{path}} does not exist and could not be created.`,error:`Bambuddy cannot write to {{path}}.`,ephemeralTitle:`These backups will not survive a container restart`,container_ephemeral:`{{path}} is inside the Bambuddy container, not on the host. Backups written there are lost when the container is recreated. Mount the directory from the host:`},categories:{settings:`Settings`,notification_providers:`Notification Providers`,notification_templates:`Notification Templates`,smart_plugs:`Smart Plugs`,printers:`Printers`,filaments:`Filaments`,maintenance_types:`Maintenance Types`,archives:`Archives`,projects:`Projects`,pending_uploads:`Pending Uploads`,external_links:`External Links`,api_keys:`API Keys`}},tags:{title:`Tags`,addTag:`Add Tag`,editTag:`Edit Tag`,deleteTag:`Delete Tag`,tagName:`Tag Name`,tagColor:`Tag Color`,noTags:`No tags`,deleteConfirm:`Are you sure you want to delete this tag?`,manageTags:`Manage Tags`},uploadModal:{title:`Upload 3MF Files`,dragDrop:`Drag & drop .3mf files here`,or:`or`,browseFiles:`Browse Files`,extractionInfo:`The printer model will be automatically extracted from the 3MF file metadata.`,uploaded:`uploaded`,failed:`failed`,uploading:`Uploading...`,upload:`Upload`,uploadFailed:`Upload failed`},editArchive:{title:`Edit Archive`,name:`Name`,namePlaceholder:`Print name`,printer:`Printer`,noPrinter:`No printer`,project:`Project`,noProject:`No project`,itemsPrinted:`Items Printed`,itemsPrintedHelp:`Number of items produced in this print job. Use 0 if the whole plate was ruined.`,filamentUsed:`Filament used (g)`,filamentUsedPlaceholder:`e.g. 46.16`,filamentUsedHelp:`Set this by hand when a print archived without its 3MF, so it still counts towards the filament totals. Rescanning an archive that has its 3MF reads the figure back from the file.`,notes:`Notes`,notesPlaceholder:`Add notes about this print...`,externalLink:`External Link`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Link to Printables, Thingiverse, or other source`,tags:`Tags`,tagsPlaceholder:`Add tags...`,addMoreTags:`Add more tags...`,matchingTags:`Matching "{{query}}"`,existingTags:`Existing tags`,clickToAdd:`(click to add)`,status:`Status`,failureReason:`Failure Reason`,selectReason:`Select reason...`,photos:`Photos of Printed Result`,photosHelp:`Click + to add photos of your printed result`,printResult:`Print result`,saving:`Saving...`,failureReasons:{adhesionFailure:`Adhesion failure`,spaghettiDetached:`Spaghetti / Detached`,layerShift:`Layer shift`,cloggedNozzle:`Clogged nozzle`,filamentRunout:`Filament runout`,warping:`Warping`,stringing:`Stringing`,underExtrusion:`Under-extrusion`,powerFailure:`Power failure`,userCancelled:`User cancelled`,noStatusUpdate:`No status update received`,other:`Other`},statuses:{completed:`Completed`,failed:`Failed`,aborted:`Cancelled`,printing:`Printing`}},kProfiles:{title:`K-Profiles`,noPrintersConfigured:`No Printers Configured`,addPrinterInSettings:`Add a printer in Settings to manage K-profiles`,noActivePrinters:`No Active Printers`,enablePrinterConnection:`Enable a printer connection to view its K-profiles`,loadingProfiles:`Loading K-Profiles...`,printerOffline:`Printer Offline`,printerOfflineDesc:`The selected printer is not connected. Power it on to view K-profiles.`,noMatchingProfiles:`No Matching Profiles`,noMatchingProfilesDesc:`No profiles match your search criteria`,noKProfiles:`No K-Profiles`,noKProfilesDesc:`No pressure advance profiles found for {{diameter}}mm nozzle`,createFirstProfile:`Create First Profile`,printer:`Printer`,nozzle:`Nozzle`,refresh:`Refresh`,addProfile:`Add Profile`,export:`Export`,import:`Import`,select:`Select`,selectAll:`Select All`,delete:`Delete`,searchPlaceholder:`Search by name or filament...`,allExtruders:`All Extruders`,leftOnly:`Left Only`,rightOnly:`Right Only`,allFlow:`All Flow`,hfOnly:`HF Only`,sOnly:`S Only`,sortName:`Sort: Name`,sortKValue:`Sort: K-Value`,sortFilament:`Sort: Filament`,leftExtruder:`Left Extruder`,rightExtruder:`Right Extruder`,modal:{addTitle:`Add K-Profile`,editTitle:`Edit K-Profile`,profileName:`Profile Name`,profileNamePlaceholder:`My PLA Profile`,kValue:`K-Value`,kValuePlaceholder:`0.020`,kValueHelp:`Typical range: 0.01 - 0.06 for PLA, 0.02 - 0.10 for PETG`,filament:`Filament`,selectFilament:`Select filament...`,source:{local:`Imported`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Built-in`},noFilamentsHelp:`No filaments available. Sign in to Bambu Cloud, or import presets under Profiles → Local Profiles.`,searchFilaments:`Search filaments...`,noFilamentMatches:`No filament matches that search`,flowType:`Flow Type`,highFlow:`High Flow`,standard:`Standard`,nozzleSize:`Nozzle Size`,extruder:`Extruder`,extruders:`Extruders`,left:`Left`,right:`Right`,notes:`Notes (stored locally)`,notesPlaceholder:`Add notes about this profile...`,notesHelp:`Notes are saved in Bambuddy, not on the printer`,syncing:`Syncing with printer...`,savingExtruder:`Saving to extruder {{current}}/{{total}}...`,pleaseWait:`Please wait`},deleteConfirm:{title:`Delete Profile`,cannotUndo:`This cannot be undone`,message:`Are you sure you want to delete "{{name}}" from the printer?`},bulkDelete:{title:`Delete Profiles`,cannotUndo:`This cannot be undone`,message:`Are you sure you want to delete {{count}} selected profiles from the printer?`},toast:{profileSaved:`K-profile saved`,profilesSaved:`K-profile saved to {{count}} extruders`,selectAtLeastOneExtruder:`Please select at least one extruder`,selectFilament:`Select a filament first`,filamentNotResolvable:`No Bambu filament ID for {{name}} — the printer cannot store a profile for it`,profileDeleted:`K-profile deleted`,profilesDeleted:`Deleted {{count}} profiles`,exportedProfiles:`Exported {{count}} profiles`,importedProfiles:`Imported {{count}} of {{total}} profiles`,noProfilesToExport:`No profiles to export`,invalidFileFormat:`Invalid file format`,failedToParseImport:`Failed to parse import file`,failedToSaveBatch:`Failed to save K-profiles`,noteSaved:`Note saved`,failedToSaveNote:`Failed to save note`},permission:{noRead:`You do not have permission to refresh profiles`,noCreate:`You do not have permission to add profiles`,noUpdate:`You do not have permission to update K-profiles`,noDelete:`You do not have permission to delete K-profiles`,noExport:`You do not have permission to export profiles`,noImport:`You do not have permission to import profiles`}},virtualPrinter:{title:`Virtual Printer`,running:`Running`,stopped:`Stopped`,description:{default:`Enable a virtual printer that appears in Bambu Studio and OrcaSlicer. Files sent to this printer will be archived directly without printing.`,proxy:`Enable a proxy that relays slicer traffic to a real printer, allowing remote printing over any network.`},enable:{title:`Enable Virtual Printer`,visibleInSlicer:`Visible as "Bambuddy" in slicer discovery`,proxyingTo:`Proxying to {{name}}`,notActive:`Not active`},model:{title:`Printer Model`,description:`Select which printer model to emulate.`,restartWarning:`Changing the model will restart the virtual printer`},accessCode:{title:`Access Code`,isSet:`Access code is set`,notSet:`No access code set - required to enable`,placeholder:`Enter 8-char code`,placeholderChange:`Enter new code to change`,hint:`Must be exactly 8 characters. Used by slicers to authenticate.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Inherited from target`,derivedFromTargetHint:`Uses the target printer's access code. The bridge forwards slicer auth to the real printer, so the codes must match — edit the printer's access code to change this value.`,reveal:`Show access code`,hide:`Hide access code`},targetPrinter:{title:`Target Printer`,configured:`Proxy target configured`,notConfigured:`No target printer selected - required for proxy mode`,placeholder:`Select a printer...`,hint:`Select the printer to proxy slicer traffic to. The printer must be in LAN mode.`,noPrinters:`No printers configured. Add a printer first to use proxy mode.`},remoteInterface:{title:`Network Interface Override`,configured:`Interface override active`,optional:`Optional - use if auto-detected IP is wrong (e.g. multiple NICs, Docker, VPN)`,placeholder:`Auto-detect (default)...`,hint:`Override the IP address advertised via SSDP and used in the TLS certificate. Useful when Bambuddy has multiple network interfaces.`},mode:{title:`Mode`,archive:`Archive`,archiveDesc:`Archive files immediately`,review:`Review`,reviewDesc:`Review before archiving`,queue:`Queue`,queueDesc:`Archive and add to queue`,proxy:`Proxy`,proxyDesc:`Relay to real printer`},autoDispatch:{title:`Auto-dispatch`,description:`Automatically start prints when added to queue. When off, prints wait for manual dispatch.`},queueForceColorMatch:{title:`Force color match`,description:`Refuse to dispatch onto a printer that does not have the exact filament type and color loaded. Off by default — without this, the queue uses model-only matching and may pick a printer with the wrong color loaded.`},saveAmsMapping:{title:`Save AMS mapping`,description:`Persist the slicer's own AMS-slot pick (from the project_file MQTT command) onto the archive, so a later reprint reuses the exact physical spool instead of re-deriving one from the file's type/color. Off by default.`},gcodeInjection:{title:`G-code injection`,description:`Apply the per-model G-code snippets configured in Settings to jobs from this VP. Off by default.`},tailscaleDisabled:{title:`Tailscale integration`,description:`Enable to mark this VP as exposed over Tailscale. Shows the host's Tailscale address so you know which IP to paste into the slicer. The CA-import step is unchanged — this toggle has no effect on certificates.`},setupRequired:{title:`Setup Required`,description:`The virtual printer feature requires additional system configuration before it will work. This includes port forwarding, firewall rules, and platform-specific settings.`,readGuide:`Read the setup guide before enabling`},archiveNameSource:{title:`Archive name source`,description:`Choose how new archives are named when files arrive via the virtual printer. "Metadata" uses the slicer-embedded Title from the 3MF (default). "Filename" uses the filename Bambu Studio sent over FTP. Note: Bambu Studio overwrites the name you type in the "send to printer" dialog with the 3MF's Title field whenever one is present, so both modes often produce the same string.`,metadata:`Metadata`,filename:`Filename`},caCert:{title:`Slicer certificate`,description:`Virtual printers use a TLS certificate signed by the Bambuddy CA. Import this CA certificate into your slicer's trust store once so it accepts the connection — no need to copy it from the command line.`,copy:`Copy`,copied:`Copied`,download:`Download`,fingerprint:`SHA-256`},howItWorks:{title:`How it works`,step1:`On the same LAN, virtual printers appear in your slicer (Bambu Studio / OrcaSlicer) automatically via discovery. From other networks, add them manually by IP address and access code.`,step2:`In Archive, Review, and Queue modes, use the "Send" button in your slicer to upload 3MF files to Bambuddy. The slicer will show "Print success" — the file is stored, not printed.`,step3:`In Proxy mode, the virtual printer relays all traffic to a real printer — prints start immediately as if connected directly.`},status:{title:`Status Details`,printerName:`Printer Name`,model:`Model`,serialNumber:`Serial Number`,mode:`Mode`,pendingFiles:`Pending Files`,targetPrinter:`Target Printer`,ftpPort:`FTP Port`,mqttPort:`MQTT Port`,ftpConnections:`FTP Connections`,mqttConnections:`MQTT Connections`},toast:{updated:`Virtual printer settings updated`,failedToUpdate:`Failed to update settings`,copyFailed:`Failed to copy — try selecting the text manually`,accessCodeRequired:`Please set an access code first`,targetPrinterRequired:`Please select a target printer first`,bindIpRequired:`Please set a bind IP first`,accessCodeEmpty:`Access code cannot be empty`,accessCodeLength:`Access code must be exactly 8 characters`,targetCodeChangedRebind:`Access code now matches the new target printer. Re-add this device in your slicer to pick up the new code.`,created:`Virtual printer created`,failedToCreate:`Failed to create virtual printer`,deleted:`Virtual printer deleted`,failedToDelete:`Failed to delete virtual printer`},list:{title:`Virtual Printers`,add:`Add`,addFirst:`Add Virtual Printer`,empty:`No virtual printers configured. Add one to get started.`},bindIp:{title:`Bind Interface`,placeholder:`Select interface...`,hint:`Network interface for this virtual printer to bind to. Must be unique per printer.`},proxy:{accessCodeHint:`In proxy mode, use your target printer's access code in the slicer. The connection is forwarded transparently to the real printer.`},addDialog:{title:`Add Virtual Printer`,name:`Name`,hint:`You can configure access code, target printer, and other settings after creating.`,create:`Create`},deleteConfirm:{title:`Delete Virtual Printer`,message:`Are you sure you want to delete "{{name}}"? This will stop all services for this printer.`}},modelViewer:{openInSlicer:`Open in Slicer`,openInSlicerWith:`Open in {{slicer}}`,moreSlicerOptions:`More slicer options`,openInSlicerFailed:`Could not open in slicer`,tabs:{model:`3D Model`},notAvailable:`not available`,plates:`Plates`,allPlates:`All Plates`,plateNumber:`Plate {{number}}`,plateCount:`{{count}} plate`,plateCount_other:`{{count}} plates`,objectCount:`{{count}} object`,objectCount_other:`{{count}} objects`,filamentCount:`{{count}} filament`,filamentCount_other:`{{count}} filaments`,eta:`ETA {{minutes}} min`,noPreview:`No preview available for this file`,pagination:{pageOf:`Page {{current}} of {{total}}`,prev:`Prev`,next:`Next`},errors:{failedToLoad:`Failed to load file`,noMeshes:`No meshes found in 3MF file`,unsupportedFormat:`Unsupported file format`}},maintenanceDescriptions:{lubricateCarbonRods:`Apply lubricant to carbon rods for smooth motion`,lubricateRails:`Apply lubricant to linear rails for smooth motion`,cleanNozzle:`Clean hotend and nozzle to prevent clogs`,checkBelts:`Verify belt tension for accurate prints`,cleanBuildPlate:`Clean build plate for better adhesion`,checkExtruder:`Inspect extruder gears for wear`,checkCooling:`Ensure cooling fans are working properly`,generalInspection:`General printer inspection`,cleanCarbonRods:`Clean carbon rods to reduce friction`,lubricateSteelRods:`Apply lubricant to steel rods for smooth motion`,cleanSteelRods:`Clean steel rods to reduce friction`,cleanLinearRails:`Wipe linear rails to remove dust and debris`,checkPtfeTube:`Inspect PTFE tube for wear or damage`,replaceHepaFilter:`Replace HEPA filter for air quality`,replaceCarbonFilter:`Replace activated carbon filter`,lubricateLeftNozzleRail:`Lubricate left nozzle rail (H2 series)`},haSensors:{label:`Sensors`,unavailable:`Unavailable`,blocksPrints:`{{entity}} — holds prints while alerting`,states:{open:`Open`,closed:`Closed`,unlocked:`Unlocked`,locked:`Locked`,detected:`Detected`,clear:`Clear`,wet:`Wet`,dry:`Dry`,problem:`Problem`,ok:`OK`,running:`Running`,stopped:`Stopped`,on:`On`,off:`Off`},sectionTitle:`Home Assistant Sensors (Printers)`,add:`Add Sensor`,addTitle:`Add Home Assistant Sensor`,editTitle:`Edit Home Assistant Sensor`,empty:`No sensors yet. Bind a door contact or a thermometer from Home Assistant to show it on a printer card.`,unknownPrinter:`Unknown printer`,badgeBlocks:`Holds prints`,badgeNotifies:`Notifies`,badgeHidden:`Hidden on card`,printer:`Printer`,entity:`Entity`,searchPlaceholder:`Search entities...`,noEntities:`No matching entities`,name:`Display name`,alertWhen:`Alert when`,alertNever:`Never — display only`,alertAbove:`Above`,alertBelow:`Below`,alertHint:`The alert state highlights the sensor on the printer card and enables the options below.`,showOnCard:`Show on printer card`,notifyOnAlert:`Send a notification when it starts alerting`,blockPrint:`Hold queued prints while alerting`,blockPrintHint:`Jobs stay queued and start on their own once the sensor clears. Ignored while Home Assistant is unreachable.`,toast:{created:`Sensor added`,updated:`Sensor saved`,deleted:`Sensor removed`},error:{pickEntity:`Pick a Home Assistant entity`,nameRequired:`Enter a display name`,printerRequired:`Pick a printer`,alertRequired:`Set an alert condition first`}},locationHaSensors:{sectionTitle:`Home Assistant Sensors (Storage Locations)`,sectionDescription:`Bind Home Assistant temperature, humidity, or battery sensors to your storage locations to show live readings on the filament card and in the table. Only one sensor per category is allowed per location.`,add:`Add Sensor`,addTitle:`Add Home Assistant Sensor`,editTitle:`Edit Home Assistant Sensor`,empty:`No sensors yet. Bind a temperature or humidity sensor from Home Assistant to show it on the filament card.`,unknownLocation:`Unknown location`,location:`Storage Location`,showOnCard:`Show on filament card`,overwriteConfirm:{title:`Replace existing sensor?`,messageTemperature:`"{{location}}" already has a temperature sensor bound: {{name}}. Continuing will replace it.`,messageHumidity:`"{{location}}" already has a humidity sensor bound: {{name}}. Continuing will replace it.`,messageBattery:`"{{location}}" already has a battery sensor bound: {{name}}. Continuing will replace it.`},autoAdd:{confirmTitle:`Add the other sensors too?`,confirmMessage:`Bambuddy also found other sensors for this location. Choose which ones to add too.`,added:`Also added: {{names}}`,noneFound:`No matching temperature, humidity, or battery sensors found for this location.`,onlyThisOne:`Only this one`},options:{buttonLabel:`Sensor options`,title:`Location Sensor Options`,description:`These values are used when a temperature, humidity, or battery sensor is bound automatically alongside the first sensor for a location.`,generalSettings:`General settings`,pollInterval:`Update interval (seconds)`,pollIntervalHint:`How often Bambuddy polls Home Assistant and refreshes sensor values on screen. Minimum 60 seconds.`,colorizeValues:`Colorize sensor values against their alert thresholds`,aboveColor:`Above threshold color`,belowColor:`Below threshold color`,optimalColor:`Optimal value color`,colors:{red:`Red`,orange:`Orange`,yellow:`Yellow`,green:`Green`,blue:`Blue`,purple:`Purple`,pink:`Pink`},saved:`Options saved`,saveFailed:`Failed to save options`,reset:`Reset`,resetConfirm:{title:`Reset all existing location sensors?`,message:`This overwrites the alert thresholds, notifications, and card visibility of every existing storage-location temperature, humidity, and battery sensor with the values configured above, and restores each sensor's name to its Home Assistant friendly name — printer sensors are not affected. This cannot be undone. Depending on how many sensors you have, this may take a moment.`},resetDone:`Applied to {{count}} location sensors`,resetFailed:`Failed to reset location sensors`},deleteAllConfirm:{title:`Delete all sensors?`,message:`This removes all {{count}} sensors bound to "{{location}}". This cannot be undone.`},currentlyBound:`Currently bound: {{entity}}`,error:{locationRequired:`Pick a storage location`},toast:{created:`Sensor added`,updated:`Sensor saved`,deleted:`Sensor removed`}},smartPlugs:{offline:`Offline`,admin:`Admin`,openPlugAdminPage:`Open plug admin page`,deleteSmartPlug:`Delete Smart Plug`,turnOnSmartPlug:`Turn On Smart Plug`,turnOffSmartPlug:`Turn Off Smart Plug`,turnOn:`Turn On`,turnOff:`Turn Off`,addSmartPlug:{scanningNetwork:`Scanning network...`,chooseEntity:`Choose an entity...`,connectionFailed:`Connection failed`,searchEntities:`Search entities...`,searchPowerSensors:`Search power sensors...`,searchEnergySensors:`Search energy sensors...`,placeholders:{plugName:`Living Room Plug`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Same as power topic, or different`}},linkedTo:`Linked to:`,monitorOnly:`Monitor Only`,alerts:`Alerts`,scheduleOn:`On {{time}}`,scheduleOff:`Off {{time}}`,on:`On`,off:`Off`,power:`Power`,kwhToday:`kWh Today`,settings:`Settings`,automationSettings:`Automation Settings`,showInSwitchbar:`Show in Switchbar`,quickAccessSidebar:`Quick access from sidebar`,enabled:`Enabled`,enableAutomation:`Enable automation for this plug`,autoOn:`Auto On`,autoOnDescription:`Turn on when print starts`,autoOff:`Auto Off`,autoOffDescription:`Turn off when print completes (one-shot)`,autoOffPersistent:`Keep Enabled`,autoOffPersistentDescription:`Stay enabled between prints instead of one-shot`,controlsPrinterPower:`Powers the printer`,controlsPrinterPowerDescription:`Turn off if this plug only powers an accessory (filter fan, lights). Otherwise switching it off marks the printer offline.`,autoOffAfterDrying:`Auto Off After Drying`,autoOffAfterDryingDescription:`Turn off when AMS drying completes`,delayAfterDryingMinutes:`Drying delay (minutes)`,turnOffDelayMode:`Turn Off Delay Mode`,time:`Time`,temp:`Temp`,delayMinutes:`Delay (minutes)`,tempThreshold:`Temperature threshold (°C)`,tempThresholdDescription:`Turns off when nozzle cools below this temperature`,edit:`Edit`,deleteConfirm:`Are you sure you want to delete "{{name}}"? This cannot be undone.`,turnOnConfirm:`Are you sure you want to turn on "{{name}}"?`,turnOffConfirm:`Are you sure you want to turn off "{{name}}"? This will cut power to the connected device.`,failedToTurn:`Failed to turn {{action}} "{{name}}"`,unknown:`Unknown`,addTitle:`Add Smart Plug`,editTitle:`Edit Smart Plug`,stopScanning:`Stop Scanning`,discoverTasmota:`Discover Tasmota Devices`,foundDevices:`Found {{count}} device(s) - click to select:`,noDevicesFound:`No Tasmota devices found on your network`,haNotConfigured:`Home Assistant is not configured. Set it up in`,haSettingsPath:`Settings → Network → Home Assistant`,selectEntity:`Select Entity *`,ipAddress:`IP Address *`,nameLabel:`Name *`,username:`Username`,password:`Password`,authHint:`Leave empty if your Tasmota device doesn't require authentication`,linkToPrinter:`Link to Printer`,noPrinter:`No printer (manual control only)`,linkingDescription:`Linking enables automatic on/off when prints start/complete`,powerAlerts:`Power Alerts`,alertAbove:`Alert if above (W)`,alertBelow:`Alert if below (W)`,alertDescription:`Get notified when power consumption crosses these thresholds. Leave empty to disable that direction.`,dailySchedule:`Daily Schedule`,turnOnAt:`Turn On at`,turnOffAt:`Turn Off at`,scheduleDescription:`Automatically turn the plug on/off at these times daily. Leave empty to skip that action.`,showOnPrinterCard:`Show on Printer Card`,displayOnPrinterCard:`Display button on printer card`,connectedResult:`Connected!`,deviceLabel:`Device: {{name}} - `,stateLabel:`State: {{state}}`,test:`Test`,delete:`Delete`,save:`Save`,add:`Add`,cancel:`Cancel`,failedToStartScan:`Failed to start scan`,nameRequired:`Name is required`,entityRequired:`Entity is required for Home Assistant plugs`,mqttTopicRequired:`At least one MQTT topic must be configured for power, energy, or state monitoring`,loadingEntities:`Loading entities...`,loading:`Loading...`,failedToLoadEntities:`Failed to load entities: {{error}}`,noEntitiesMatching:`No entities found matching "{{search}}"`,noEntitiesAvailable:`No entities available`,searchingEntities:`Searching all entities ({{count}} found)`,showingEntities:`Showing switch, light, input_boolean ({{count}} available)`,energyMonitoringOptional:`Energy Monitoring (Optional)`,energyMonitoringHint:`Search and select sensors that provide power/energy data.`,powerSensorW:`Power Sensor (W)`,energyTodayKwh:`Energy Today (kWh)`,totalEnergyKwh:`Total Energy (kWh)`,noMatchingSensors:`No matching sensors`,none:`None`,mqttNotConfigured:`MQTT broker not configured. Set broker address in`,mqttSettingsPath:`Settings → Network → MQTT Publishing`,mqttNotConfiguredSuffix:`(you don't need to enable publishing, just fill in the broker details).`,mqttMonitorOnlyDescription:`MQTT plugs receive power/energy data via MQTT subscription. On/off control is not available - use your MQTT broker or home automation system.`,powerMonitoring:`Power Monitoring`,energyMonitoring:`Energy Monitoring`,stateMonitoring:`State Monitoring`,optional:`optional`,topic:`Topic`,jsonPath:`JSON Path`,multiplier:`Multiplier`,onValue:`ON Value`,mqttPowerHint:`JSON path extracts value from JSON payload (e.g., "power_l1"). Leave empty if topic publishes raw numeric values.
+`).replace(tee,``)}function Md(e,t){return t=jd(t),jd(e)===t}function Nd(e,t,n,r,a,o){switch(n){case`children`:typeof r==`string`?t===`body`||t===`textarea`&&r===``||Bt(e,r):(typeof r==`number`||typeof r==`bigint`)&&t!==`body`&&Bt(e,``+r);break;case`className`:wt(e,`class`,r);break;case`tabIndex`:wt(e,`tabindex`,r);break;case`dir`:case`role`:case`viewBox`:case`width`:case`height`:wt(e,n,r);break;case`style`:Ut(e,r,o);break;case`data`:if(t!==`object`){wt(e,`data`,r);break}case`src`:case`href`:if(r===``&&(t!==`a`||n!==`href`)){e.removeAttribute(n);break}if(r==null||typeof r==`function`||typeof r==`symbol`||typeof r==`boolean`){e.removeAttribute(n);break}r=qt(``+r),e.setAttribute(n,r);break;case`action`:case`formAction`:if(typeof r==`function`){e.setAttribute(n,`javascript:throw new Error('A React form was unexpectedly submitted. If you called form.submit() manually, consider using form.requestSubmit() instead. If you\\'re trying to use event.stopPropagation() in a submit event handler, consider also calling event.preventDefault().')`);break}else typeof o==`function`&&(n===`formAction`?(t!==`input`&&Nd(e,t,`name`,a.name,a,null),Nd(e,t,`formEncType`,a.formEncType,a,null),Nd(e,t,`formMethod`,a.formMethod,a,null),Nd(e,t,`formTarget`,a.formTarget,a,null)):(Nd(e,t,`encType`,a.encType,a,null),Nd(e,t,`method`,a.method,a,null),Nd(e,t,`target`,a.target,a,null)));if(r==null||typeof r==`symbol`||typeof r==`boolean`){e.removeAttribute(n);break}r=qt(``+r),e.setAttribute(n,r);break;case`onClick`:r!=null&&(e.onclick=Jt);break;case`onScroll`:r!=null&&Z(`scroll`,e);break;case`onScrollEnd`:r!=null&&Z(`scrollend`,e);break;case`dangerouslySetInnerHTML`:if(r!=null){if(typeof r!=`object`||!(`__html`in r))throw Error(i(61));if(n=r.__html,n!=null){if(a.children!=null)throw Error(i(60));e.innerHTML=n}}break;case`multiple`:e.multiple=r&&typeof r!=`function`&&typeof r!=`symbol`;break;case`muted`:e.muted=r&&typeof r!=`function`&&typeof r!=`symbol`;break;case`suppressContentEditableWarning`:case`suppressHydrationWarning`:case`defaultValue`:case`defaultChecked`:case`innerHTML`:case`ref`:break;case`autoFocus`:break;case`xlinkHref`:if(r==null||typeof r==`function`||typeof r==`boolean`||typeof r==`symbol`){e.removeAttribute(`xlink:href`);break}n=qt(``+r),e.setAttributeNS(`http://www.w3.org/1999/xlink`,`xlink:href`,n);break;case`contentEditable`:case`spellCheck`:case`draggable`:case`value`:case`autoReverse`:case`externalResourcesRequired`:case`focusable`:case`preserveAlpha`:r!=null&&typeof r!=`function`&&typeof r!=`symbol`?e.setAttribute(n,``+r):e.removeAttribute(n);break;case`inert`:case`allowFullScreen`:case`async`:case`autoPlay`:case`controls`:case`default`:case`defer`:case`disabled`:case`disablePictureInPicture`:case`disableRemotePlayback`:case`formNoValidate`:case`hidden`:case`loop`:case`noModule`:case`noValidate`:case`open`:case`playsInline`:case`readOnly`:case`required`:case`reversed`:case`scoped`:case`seamless`:case`itemScope`:r&&typeof r!=`function`&&typeof r!=`symbol`?e.setAttribute(n,``):e.removeAttribute(n);break;case`capture`:case`download`:!0===r?e.setAttribute(n,``):!1!==r&&r!=null&&typeof r!=`function`&&typeof r!=`symbol`?e.setAttribute(n,r):e.removeAttribute(n);break;case`cols`:case`rows`:case`size`:case`span`:r!=null&&typeof r!=`function`&&typeof r!=`symbol`&&!isNaN(r)&&1<=r?e.setAttribute(n,r):e.removeAttribute(n);break;case`rowSpan`:case`start`:r==null||typeof r==`function`||typeof r==`symbol`||isNaN(r)?e.removeAttribute(n):e.setAttribute(n,r);break;case`popover`:Z(`beforetoggle`,e),Z(`toggle`,e),Ct(e,`popover`,r);break;case`xlinkActuate`:Tt(e,`http://www.w3.org/1999/xlink`,`xlink:actuate`,r);break;case`xlinkArcrole`:Tt(e,`http://www.w3.org/1999/xlink`,`xlink:arcrole`,r);break;case`xlinkRole`:Tt(e,`http://www.w3.org/1999/xlink`,`xlink:role`,r);break;case`xlinkShow`:Tt(e,`http://www.w3.org/1999/xlink`,`xlink:show`,r);break;case`xlinkTitle`:Tt(e,`http://www.w3.org/1999/xlink`,`xlink:title`,r);break;case`xlinkType`:Tt(e,`http://www.w3.org/1999/xlink`,`xlink:type`,r);break;case`xmlBase`:Tt(e,`http://www.w3.org/XML/1998/namespace`,`xml:base`,r);break;case`xmlLang`:Tt(e,`http://www.w3.org/XML/1998/namespace`,`xml:lang`,r);break;case`xmlSpace`:Tt(e,`http://www.w3.org/XML/1998/namespace`,`xml:space`,r);break;case`is`:Ct(e,`is`,r);break;case`innerText`:case`textContent`:break;default:(!(2<n.length)||n[0]!==`o`&&n[0]!==`O`||n[1]!==`n`&&n[1]!==`N`)&&(n=Gt.get(n)||n,Ct(e,n,r))}}function Pd(e,t,n,r,a,o){switch(n){case`style`:Ut(e,r,o);break;case`dangerouslySetInnerHTML`:if(r!=null){if(typeof r!=`object`||!(`__html`in r))throw Error(i(61));if(n=r.__html,n!=null){if(a.children!=null)throw Error(i(60));e.innerHTML=n}}break;case`children`:typeof r==`string`?Bt(e,r):(typeof r==`number`||typeof r==`bigint`)&&Bt(e,``+r);break;case`onScroll`:r!=null&&Z(`scroll`,e);break;case`onScrollEnd`:r!=null&&Z(`scrollend`,e);break;case`onClick`:r!=null&&(e.onclick=Jt);break;case`suppressContentEditableWarning`:case`suppressHydrationWarning`:case`innerHTML`:case`ref`:break;case`innerText`:case`textContent`:break;default:if(!gt.hasOwnProperty(n))a:{if(n[0]===`o`&&n[1]===`n`&&(a=n.endsWith(`Capture`),t=n.slice(2,a?n.length-7:void 0),o=e[nt]||null,o=o==null?null:o[n],typeof o==`function`&&e.removeEventListener(t,o,a),typeof r==`function`)){typeof o!=`function`&&o!==null&&(n in e?e[n]=null:e.hasAttribute(n)&&e.removeAttribute(n)),e.addEventListener(t,r,a);break a}n in e?e[n]=r:!0===r?e.setAttribute(n,``):Ct(e,n,r)}}}function Fd(e,t,n){switch(t){case`div`:case`span`:case`svg`:case`path`:case`a`:case`g`:case`p`:case`li`:break;case`img`:Z(`error`,e),Z(`load`,e);var r=!1,a=!1,o;for(o in n)if(n.hasOwnProperty(o)){var s=n[o];if(s!=null)switch(o){case`src`:r=!0;break;case`srcSet`:a=!0;break;case`children`:case`dangerouslySetInnerHTML`:throw Error(i(137,t));default:Nd(e,t,o,s,n,null)}}a&&Nd(e,t,`srcSet`,n.srcSet,n,null),r&&Nd(e,t,`src`,n.src,n,null);return;case`input`:Z(`invalid`,e);var c=o=s=a=null,l=null,u=null;for(r in n)if(n.hasOwnProperty(r)){var d=n[r];if(d!=null)switch(r){case`name`:a=d;break;case`type`:s=d;break;case`checked`:l=d;break;case`defaultChecked`:u=d;break;case`value`:o=d;break;case`defaultValue`:c=d;break;case`children`:case`dangerouslySetInnerHTML`:if(d!=null)throw Error(i(137,t));break;default:Nd(e,t,r,d,n,null)}}Ft(e,o,c,l,u,s,a,!1);return;case`select`:for(a in Z(`invalid`,e),r=s=o=null,n)if(n.hasOwnProperty(a)&&(c=n[a],c!=null))switch(a){case`value`:o=c;break;case`defaultValue`:s=c;break;case`multiple`:r=c;default:Nd(e,t,a,c,n,null)}t=o,n=s,e.multiple=!!r,t==null?n!=null&&Lt(e,!!r,n,!0):Lt(e,!!r,t,!1);return;case`textarea`:for(s in Z(`invalid`,e),o=a=r=null,n)if(n.hasOwnProperty(s)&&(c=n[s],c!=null))switch(s){case`value`:r=c;break;case`defaultValue`:a=c;break;case`children`:o=c;break;case`dangerouslySetInnerHTML`:if(c!=null)throw Error(i(91));break;default:Nd(e,t,s,c,n,null)}zt(e,r,a,o);return;case`option`:for(l in n)if(n.hasOwnProperty(l)&&(r=n[l],r!=null))switch(l){case`selected`:e.selected=r&&typeof r!=`function`&&typeof r!=`symbol`;break;default:Nd(e,t,l,r,n,null)}return;case`dialog`:Z(`beforetoggle`,e),Z(`toggle`,e),Z(`cancel`,e),Z(`close`,e);break;case`iframe`:case`object`:Z(`load`,e);break;case`video`:case`audio`:for(r=0;r<yd.length;r++)Z(yd[r],e);break;case`image`:Z(`error`,e),Z(`load`,e);break;case`details`:Z(`toggle`,e);break;case`embed`:case`source`:case`link`:Z(`error`,e),Z(`load`,e);case`area`:case`base`:case`br`:case`col`:case`hr`:case`keygen`:case`meta`:case`param`:case`track`:case`wbr`:case`menuitem`:for(u in n)if(n.hasOwnProperty(u)&&(r=n[u],r!=null))switch(u){case`children`:case`dangerouslySetInnerHTML`:throw Error(i(137,t));default:Nd(e,t,u,r,n,null)}return;default:if(Wt(t)){for(d in n)n.hasOwnProperty(d)&&(r=n[d],r!==void 0&&Pd(e,t,d,r,n,void 0));return}}for(c in n)n.hasOwnProperty(c)&&(r=n[c],r!=null&&Nd(e,t,c,r,n,null))}function Id(e,t,n,r){switch(t){case`div`:case`span`:case`svg`:case`path`:case`a`:case`g`:case`p`:case`li`:break;case`input`:var a=null,o=null,s=null,c=null,l=null,u=null,d=null;for(m in n){var f=n[m];if(n.hasOwnProperty(m)&&f!=null)switch(m){case`checked`:break;case`value`:break;case`defaultValue`:l=f;default:r.hasOwnProperty(m)||Nd(e,t,m,null,r,f)}}for(var p in r){var m=r[p];if(f=n[p],r.hasOwnProperty(p)&&(m!=null||f!=null))switch(p){case`type`:o=m;break;case`name`:a=m;break;case`checked`:u=m;break;case`defaultChecked`:d=m;break;case`value`:s=m;break;case`defaultValue`:c=m;break;case`children`:case`dangerouslySetInnerHTML`:if(m!=null)throw Error(i(137,t));break;default:m!==f&&Nd(e,t,p,m,r,f)}}Pt(e,s,c,l,u,d,o,a);return;case`select`:for(o in m=s=c=p=null,n)if(l=n[o],n.hasOwnProperty(o)&&l!=null)switch(o){case`value`:break;case`multiple`:m=l;default:r.hasOwnProperty(o)||Nd(e,t,o,null,r,l)}for(a in r)if(o=r[a],l=n[a],r.hasOwnProperty(a)&&(o!=null||l!=null))switch(a){case`value`:p=o;break;case`defaultValue`:c=o;break;case`multiple`:s=o;default:o!==l&&Nd(e,t,a,o,r,l)}t=c,n=s,r=m,p==null?!!r!=!!n&&(t==null?Lt(e,!!n,n?[]:``,!1):Lt(e,!!n,t,!0)):Lt(e,!!n,p,!1);return;case`textarea`:for(c in m=p=null,n)if(a=n[c],n.hasOwnProperty(c)&&a!=null&&!r.hasOwnProperty(c))switch(c){case`value`:break;case`children`:break;default:Nd(e,t,c,null,r,a)}for(s in r)if(a=r[s],o=n[s],r.hasOwnProperty(s)&&(a!=null||o!=null))switch(s){case`value`:p=a;break;case`defaultValue`:m=a;break;case`children`:break;case`dangerouslySetInnerHTML`:if(a!=null)throw Error(i(91));break;default:a!==o&&Nd(e,t,s,a,r,o)}Rt(e,p,m);return;case`option`:for(var h in n)if(p=n[h],n.hasOwnProperty(h)&&p!=null&&!r.hasOwnProperty(h))switch(h){case`selected`:e.selected=!1;break;default:Nd(e,t,h,null,r,p)}for(l in r)if(p=r[l],m=n[l],r.hasOwnProperty(l)&&p!==m&&(p!=null||m!=null))switch(l){case`selected`:e.selected=p&&typeof p!=`function`&&typeof p!=`symbol`;break;default:Nd(e,t,l,p,r,m)}return;case`img`:case`link`:case`area`:case`base`:case`br`:case`col`:case`embed`:case`hr`:case`keygen`:case`meta`:case`param`:case`source`:case`track`:case`wbr`:case`menuitem`:for(var g in n)p=n[g],n.hasOwnProperty(g)&&p!=null&&!r.hasOwnProperty(g)&&Nd(e,t,g,null,r,p);for(u in r)if(p=r[u],m=n[u],r.hasOwnProperty(u)&&p!==m&&(p!=null||m!=null))switch(u){case`children`:case`dangerouslySetInnerHTML`:if(p!=null)throw Error(i(137,t));break;default:Nd(e,t,u,p,r,m)}return;default:if(Wt(t)){for(var _ in n)p=n[_],n.hasOwnProperty(_)&&p!==void 0&&!r.hasOwnProperty(_)&&Pd(e,t,_,void 0,r,p);for(d in r)p=r[d],m=n[d],!r.hasOwnProperty(d)||p===m||p===void 0&&m===void 0||Pd(e,t,d,p,r,m);return}}for(var v in n)p=n[v],n.hasOwnProperty(v)&&p!=null&&!r.hasOwnProperty(v)&&Nd(e,t,v,null,r,p);for(f in r)p=r[f],m=n[f],!r.hasOwnProperty(f)||p===m||p==null&&m==null||Nd(e,t,f,p,r,m)}function Ld(e){switch(e){case`css`:case`script`:case`font`:case`img`:case`image`:case`input`:case`link`:return!0;default:return!1}}function Rd(){if(typeof performance.getEntriesByType==`function`){for(var e=0,t=0,n=performance.getEntriesByType(`resource`),r=0;r<n.length;r++){var i=n[r],a=i.transferSize,o=i.initiatorType,s=i.duration;if(a&&s&&Ld(o)){for(o=0,s=i.responseEnd,r+=1;r<n.length;r++){var c=n[r],l=c.startTime;if(l>s)break;var u=c.transferSize,d=c.initiatorType;u&&Ld(d)&&(c=c.responseEnd,o+=u*(c<s?1:(s-l)/(c-l)))}if(--r,t+=8*(a+o)/(i.duration/1e3),e++,10<e)break}}if(0<e)return t/e/1e6}return navigator.connection&&(e=navigator.connection.downlink,typeof e==`number`)?e:5}var zd=null,Bd=null;function Vd(e){return e.nodeType===9?e:e.ownerDocument}function Hd(e){switch(e){case`http://www.w3.org/2000/svg`:return 1;case`http://www.w3.org/1998/Math/MathML`:return 2;default:return 0}}function Ud(e,t){if(e===0)switch(t){case`svg`:return 1;case`math`:return 2;default:return 0}return e===1&&t===`foreignObject`?0:e}function Wd(e,t){return e===`textarea`||e===`noscript`||typeof t.children==`string`||typeof t.children==`number`||typeof t.children==`bigint`||typeof t.dangerouslySetInnerHTML==`object`&&t.dangerouslySetInnerHTML!==null&&t.dangerouslySetInnerHTML.__html!=null}var Gd=null;function Kd(){var e=window.event;return e&&e.type===`popstate`?e===Gd?!1:(Gd=e,!0):(Gd=null,!1)}var qd=typeof setTimeout==`function`?setTimeout:void 0,Jd=typeof clearTimeout==`function`?clearTimeout:void 0,Yd=typeof Promise==`function`?Promise:void 0,Xd=typeof queueMicrotask==`function`?queueMicrotask:Yd===void 0?qd:function(e){return Yd.resolve(null).then(e).catch(Zd)};function Zd(e){setTimeout(function(){throw e})}function Qd(e){return e===`head`}function $d(e,t){var n=t,r=0;do{var i=n.nextSibling;if(e.removeChild(n),i&&i.nodeType===8)if(n=i.data,n===`/$`||n===`/&`){if(r===0){e.removeChild(i),Mp(t);return}r--}else if(n===`$`||n===`$?`||n===`$~`||n===`$!`||n===`&`)r++;else if(n===`html`)pf(e.ownerDocument.documentElement);else if(n===`head`){n=e.ownerDocument.head,pf(n);for(var a=n.firstChild;a;){var o=a.nextSibling,s=a.nodeName;a[ct]||s===`SCRIPT`||s===`STYLE`||s===`LINK`&&a.rel.toLowerCase()===`stylesheet`||n.removeChild(a),a=o}}else n===`body`&&pf(e.ownerDocument.body);n=i}while(n);Mp(t)}function ef(e,t){var n=e;e=0;do{var r=n.nextSibling;if(n.nodeType===1?t?(n._stashedDisplay=n.style.display,n.style.display=`none`):(n.style.display=n._stashedDisplay||``,n.getAttribute(`style`)===``&&n.removeAttribute(`style`)):n.nodeType===3&&(t?(n._stashedText=n.nodeValue,n.nodeValue=``):n.nodeValue=n._stashedText||``),r&&r.nodeType===8)if(n=r.data,n===`/$`){if(e===0)break;e--}else n!==`$`&&n!==`$?`&&n!==`$~`&&n!==`$!`||e++;n=r}while(n)}function tf(e){var t=e.firstChild;for(t&&t.nodeType===10&&(t=t.nextSibling);t;){var n=t;switch(t=t.nextSibling,n.nodeName){case`HTML`:case`HEAD`:case`BODY`:tf(n),lt(n);continue;case`SCRIPT`:case`STYLE`:continue;case`LINK`:if(n.rel.toLowerCase()===`stylesheet`)continue}e.removeChild(n)}}function nf(e,t,n,r){for(;e.nodeType===1;){var i=n;if(e.nodeName.toLowerCase()!==t.toLowerCase()){if(!r&&(e.nodeName!==`INPUT`||e.type!==`hidden`))break}else if(!r)if(t===`input`&&e.type===`hidden`){var a=i.name==null?null:``+i.name;if(i.type===`hidden`&&e.getAttribute(`name`)===a)return e}else return e;else if(!e[ct])switch(t){case`meta`:if(!e.hasAttribute(`itemprop`))break;return e;case`link`:if(a=e.getAttribute(`rel`),a===`stylesheet`&&e.hasAttribute(`data-precedence`)||a!==i.rel||e.getAttribute(`href`)!==(i.href==null||i.href===``?null:i.href)||e.getAttribute(`crossorigin`)!==(i.crossOrigin==null?null:i.crossOrigin)||e.getAttribute(`title`)!==(i.title==null?null:i.title))break;return e;case`style`:if(e.hasAttribute(`data-precedence`))break;return e;case`script`:if(a=e.getAttribute(`src`),(a!==(i.src==null?null:i.src)||e.getAttribute(`type`)!==(i.type==null?null:i.type)||e.getAttribute(`crossorigin`)!==(i.crossOrigin==null?null:i.crossOrigin))&&a&&e.hasAttribute(`async`)&&!e.hasAttribute(`itemprop`))break;return e;default:return e}if(e=cf(e.nextSibling),e===null)break}return null}function Q(e,t,n){if(t===``)return null;for(;e.nodeType!==3;)if((e.nodeType!==1||e.nodeName!==`INPUT`||e.type!==`hidden`)&&!n||(e=cf(e.nextSibling),e===null))return null;return e}function rf(e,t){for(;e.nodeType!==8;)if((e.nodeType!==1||e.nodeName!==`INPUT`||e.type!==`hidden`)&&!t||(e=cf(e.nextSibling),e===null))return null;return e}function af(e){return e.data===`$?`||e.data===`$~`}function of(e){return e.data===`$!`||e.data===`$?`&&e.ownerDocument.readyState!==`loading`}function sf(e,t){var n=e.ownerDocument;if(e.data===`$~`)e._reactRetry=t;else if(e.data!==`$?`||n.readyState!==`loading`)t();else{var r=function(){t(),n.removeEventListener(`DOMContentLoaded`,r)};n.addEventListener(`DOMContentLoaded`,r),e._reactRetry=r}}function cf(e){for(;e!=null;e=e.nextSibling){var t=e.nodeType;if(t===1||t===3)break;if(t===8){if(t=e.data,t===`$`||t===`$!`||t===`$?`||t===`$~`||t===`&`||t===`F!`||t===`F`)break;if(t===`/$`||t===`/&`)return null}}return e}var lf=null;function uf(e){e=e.nextSibling;for(var t=0;e;){if(e.nodeType===8){var n=e.data;if(n===`/$`||n===`/&`){if(t===0)return cf(e.nextSibling);t--}else n!==`$`&&n!==`$!`&&n!==`$?`&&n!==`$~`&&n!==`&`||t++}e=e.nextSibling}return null}function df(e){e=e.previousSibling;for(var t=0;e;){if(e.nodeType===8){var n=e.data;if(n===`$`||n===`$!`||n===`$?`||n===`$~`||n===`&`){if(t===0)return e;t--}else n!==`/$`&&n!==`/&`||t++}e=e.previousSibling}return null}function ff(e,t,n){switch(t=Vd(n),e){case`html`:if(e=t.documentElement,!e)throw Error(i(452));return e;case`head`:if(e=t.head,!e)throw Error(i(453));return e;case`body`:if(e=t.body,!e)throw Error(i(454));return e;default:throw Error(i(451))}}function pf(e){for(var t=e.attributes;t.length;)e.removeAttributeNode(t[0]);lt(e)}var mf=new Map,hf=new Set;function gf(e){return typeof e.getRootNode==`function`?e.getRootNode():e.nodeType===9?e:e.ownerDocument}var _f=L.d;L.d={f:vf,r:yf,D:Sf,C:Cf,L:wf,m:Tf,X:Ef,S:nee,M:Df};function vf(){var e=_f.f(),t=xu();return e||t}function yf(e){var t=dt(e);t!==null&&t.tag===5&&t.type===`form`?Ss(t):_f.r(e)}var bf=typeof document>`u`?null:document;function xf(e,t,n){var r=bf;if(r&&typeof t==`string`&&t){var i=Nt(t);i=`link[rel="`+e+`"][href="`+i+`"]`,typeof n==`string`&&(i+=`[crossorigin="`+n+`"]`),hf.has(i)||(hf.add(i),e={rel:e,crossOrigin:n,href:t},r.querySelector(i)===null&&(t=r.createElement(`link`),Fd(t,`link`,e),mt(t),r.head.appendChild(t)))}}function Sf(e){_f.D(e),xf(`dns-prefetch`,e,null)}function Cf(e,t){_f.C(e,t),xf(`preconnect`,e,t)}function wf(e,t,n){_f.L(e,t,n);var r=bf;if(r&&e&&t){var i=`link[rel="preload"][as="`+Nt(t)+`"]`;t===`image`&&n&&n.imageSrcSet?(i+=`[imagesrcset="`+Nt(n.imageSrcSet)+`"]`,typeof n.imageSizes==`string`&&(i+=`[imagesizes="`+Nt(n.imageSizes)+`"]`)):i+=`[href="`+Nt(e)+`"]`;var a=i;switch(t){case`style`:a=kf(e);break;case`script`:a=Nf(e)}mf.has(a)||(e=p({rel:`preload`,href:t===`image`&&n&&n.imageSrcSet?void 0:e,as:t},n),mf.set(a,e),r.querySelector(i)!==null||t===`style`&&r.querySelector(Af(a))||t===`script`&&r.querySelector(Pf(a))||(t=r.createElement(`link`),Fd(t,`link`,e),mt(t),r.head.appendChild(t)))}}function Tf(e,t){_f.m(e,t);var n=bf;if(n&&e){var r=t&&typeof t.as==`string`?t.as:`script`,i=`link[rel="modulepreload"][as="`+Nt(r)+`"][href="`+Nt(e)+`"]`,a=i;switch(r){case`audioworklet`:case`paintworklet`:case`serviceworker`:case`sharedworker`:case`worker`:case`script`:a=Nf(e)}if(!mf.has(a)&&(e=p({rel:`modulepreload`,href:e},t),mf.set(a,e),n.querySelector(i)===null)){switch(r){case`audioworklet`:case`paintworklet`:case`serviceworker`:case`sharedworker`:case`worker`:case`script`:if(n.querySelector(Pf(a)))return}r=n.createElement(`link`),Fd(r,`link`,e),mt(r),n.head.appendChild(r)}}}function nee(e,t,n){_f.S(e,t,n);var r=bf;if(r&&e){var i=pt(r).hoistableStyles,a=kf(e);t||=`default`;var o=i.get(a);if(!o){var s={loading:0,preload:null};if(o=r.querySelector(Af(a)))s.loading=5;else{e=p({rel:`stylesheet`,href:e,"data-precedence":t},n),(n=mf.get(a))&&Lf(e,n);var c=o=r.createElement(`link`);mt(c),Fd(c,`link`,e),c._p=new Promise(function(e,t){c.onload=e,c.onerror=t}),c.addEventListener(`load`,function(){s.loading|=1}),c.addEventListener(`error`,function(){s.loading|=2}),s.loading|=4,If(o,t,r)}o={type:`stylesheet`,instance:o,count:1,state:s},i.set(a,o)}}}function Ef(e,t){_f.X(e,t);var n=bf;if(n&&e){var r=pt(n).hoistableScripts,i=Nf(e),a=r.get(i);a||(a=n.querySelector(Pf(i)),a||(e=p({src:e,async:!0},t),(t=mf.get(i))&&Rf(e,t),a=n.createElement(`script`),mt(a),Fd(a,`link`,e),n.head.appendChild(a)),a={type:`script`,instance:a,count:1,state:null},r.set(i,a))}}function Df(e,t){_f.M(e,t);var n=bf;if(n&&e){var r=pt(n).hoistableScripts,i=Nf(e),a=r.get(i);a||(a=n.querySelector(Pf(i)),a||(e=p({src:e,async:!0,type:`module`},t),(t=mf.get(i))&&Rf(e,t),a=n.createElement(`script`),mt(a),Fd(a,`link`,e),n.head.appendChild(a)),a={type:`script`,instance:a,count:1,state:null},r.set(i,a))}}function Of(e,t,n,r){var a=(a=ie.current)?gf(a):null;if(!a)throw Error(i(446));switch(e){case`meta`:case`title`:return null;case`style`:return typeof n.precedence==`string`&&typeof n.href==`string`?(t=kf(n.href),n=pt(a).hoistableStyles,r=n.get(t),r||(r={type:`style`,instance:null,count:0,state:null},n.set(t,r)),r):{type:`void`,instance:null,count:0,state:null};case`link`:if(n.rel===`stylesheet`&&typeof n.href==`string`&&typeof n.precedence==`string`){e=kf(n.href);var o=pt(a).hoistableStyles,s=o.get(e);if(s||(a=a.ownerDocument||a,s={type:`stylesheet`,instance:null,count:0,state:{loading:0,preload:null}},o.set(e,s),(o=a.querySelector(Af(e)))&&!o._p&&(s.instance=o,s.state.loading=5),mf.has(e)||(n={rel:`preload`,as:`style`,href:n.href,crossOrigin:n.crossOrigin,integrity:n.integrity,media:n.media,hrefLang:n.hrefLang,referrerPolicy:n.referrerPolicy},mf.set(e,n),o||Mf(a,e,n,s.state))),t&&r===null)throw Error(i(528,``));return s}if(t&&r!==null)throw Error(i(529,``));return null;case`script`:return t=n.async,n=n.src,typeof n==`string`&&t&&typeof t!=`function`&&typeof t!=`symbol`?(t=Nf(n),n=pt(a).hoistableScripts,r=n.get(t),r||(r={type:`script`,instance:null,count:0,state:null},n.set(t,r)),r):{type:`void`,instance:null,count:0,state:null};default:throw Error(i(444,e))}}function kf(e){return`href="`+Nt(e)+`"`}function Af(e){return`link[rel="stylesheet"][`+e+`]`}function jf(e){return p({},e,{"data-precedence":e.precedence,precedence:null})}function Mf(e,t,n,r){e.querySelector(`link[rel="preload"][as="style"][`+t+`]`)?r.loading=1:(t=e.createElement(`link`),r.preload=t,t.addEventListener(`load`,function(){return r.loading|=1}),t.addEventListener(`error`,function(){return r.loading|=2}),Fd(t,`link`,n),mt(t),e.head.appendChild(t))}function Nf(e){return`[src="`+Nt(e)+`"]`}function Pf(e){return`script[async]`+e}function Ff(e,t,n){if(t.count++,t.instance===null)switch(t.type){case`style`:var r=e.querySelector(`style[data-href~="`+Nt(n.href)+`"]`);if(r)return t.instance=r,mt(r),r;var a=p({},n,{"data-href":n.href,"data-precedence":n.precedence,href:null,precedence:null});return r=(e.ownerDocument||e).createElement(`style`),mt(r),Fd(r,`style`,a),If(r,n.precedence,e),t.instance=r;case`stylesheet`:a=kf(n.href);var o=e.querySelector(Af(a));if(o)return t.state.loading|=4,t.instance=o,mt(o),o;r=jf(n),(a=mf.get(a))&&Lf(r,a),o=(e.ownerDocument||e).createElement(`link`),mt(o);var s=o;return s._p=new Promise(function(e,t){s.onload=e,s.onerror=t}),Fd(o,`link`,r),t.state.loading|=4,If(o,n.precedence,e),t.instance=o;case`script`:return o=Nf(n.src),(a=e.querySelector(Pf(o)))?(t.instance=a,mt(a),a):(r=n,(a=mf.get(o))&&(r=p({},n),Rf(r,a)),e=e.ownerDocument||e,a=e.createElement(`script`),mt(a),Fd(a,`link`,r),e.head.appendChild(a),t.instance=a);case`void`:return null;default:throw Error(i(443,t.type))}else t.type===`stylesheet`&&!(t.state.loading&4)&&(r=t.instance,t.state.loading|=4,If(r,n.precedence,e));return t.instance}function If(e,t,n){for(var r=n.querySelectorAll(`link[rel="stylesheet"][data-precedence],style[data-precedence]`),i=r.length?r[r.length-1]:null,a=i,o=0;o<r.length;o++){var s=r[o];if(s.dataset.precedence===t)a=s;else if(a!==i)break}a?a.parentNode.insertBefore(e,a.nextSibling):(t=n.nodeType===9?n.head:n,t.insertBefore(e,t.firstChild))}function Lf(e,t){e.crossOrigin??=t.crossOrigin,e.referrerPolicy??=t.referrerPolicy,e.title??=t.title}function Rf(e,t){e.crossOrigin??=t.crossOrigin,e.referrerPolicy??=t.referrerPolicy,e.integrity??=t.integrity}var zf=null;function Bf(e,t,n){if(zf===null){var r=new Map,i=zf=new Map;i.set(n,r)}else i=zf,r=i.get(n),r||(r=new Map,i.set(n,r));if(r.has(e))return r;for(r.set(e,null),n=n.getElementsByTagName(e),i=0;i<n.length;i++){var a=n[i];if(!(a[ct]||a[tt]||e===`link`&&a.getAttribute(`rel`)===`stylesheet`)&&a.namespaceURI!==`http://www.w3.org/2000/svg`){var o=a.getAttribute(t)||``;o=e+o;var s=r.get(o);s?s.push(a):r.set(o,[a])}}return r}function Vf(e,t,n){e=e.ownerDocument||e,e.head.insertBefore(n,t===`title`?e.querySelector(`head > title`):null)}function Hf(e,t,n){if(n===1||t.itemProp!=null)return!1;switch(e){case`meta`:case`title`:return!0;case`style`:if(typeof t.precedence!=`string`||typeof t.href!=`string`||t.href===``)break;return!0;case`link`:if(typeof t.rel!=`string`||typeof t.href!=`string`||t.href===``||t.onLoad||t.onError)break;switch(t.rel){case`stylesheet`:return e=t.disabled,typeof t.precedence==`string`&&e==null;default:return!0}case`script`:if(t.async&&typeof t.async!=`function`&&typeof t.async!=`symbol`&&!t.onLoad&&!t.onError&&t.src&&typeof t.src==`string`)return!0}return!1}function Uf(e){return!(e.type===`stylesheet`&&!(e.state.loading&3))}function Wf(e,t,n,r){if(n.type===`stylesheet`&&(typeof r.media!=`string`||!1!==matchMedia(r.media).matches)&&!(n.state.loading&4)){if(n.instance===null){var i=kf(r.href),a=t.querySelector(Af(i));if(a){t=a._p,typeof t==`object`&&t&&typeof t.then==`function`&&(e.count++,e=qf.bind(e),t.then(e,e)),n.state.loading|=4,n.instance=a,mt(a);return}a=t.ownerDocument||t,r=jf(r),(i=mf.get(i))&&Lf(r,i),a=a.createElement(`link`),mt(a);var o=a;o._p=new Promise(function(e,t){o.onload=e,o.onerror=t}),Fd(a,`link`,r),n.instance=a}e.stylesheets===null&&(e.stylesheets=new Map),e.stylesheets.set(n,t),(t=n.state.preload)&&!(n.state.loading&3)&&(e.count++,n=qf.bind(e),t.addEventListener(`load`,n),t.addEventListener(`error`,n))}}var Gf=0;function Kf(e,t){return e.stylesheets&&e.count===0&&Yf(e,e.stylesheets),0<e.count||0<e.imgCount?function(n){var r=setTimeout(function(){if(e.stylesheets&&Yf(e,e.stylesheets),e.unsuspend){var t=e.unsuspend;e.unsuspend=null,t()}},6e4+t);0<e.imgBytes&&Gf===0&&(Gf=62500*Rd());var i=setTimeout(function(){if(e.waitingForImages=!1,e.count===0&&(e.stylesheets&&Yf(e,e.stylesheets),e.unsuspend)){var t=e.unsuspend;e.unsuspend=null,t()}},(e.imgBytes>Gf?50:800)+t);return e.unsuspend=n,function(){e.unsuspend=null,clearTimeout(r),clearTimeout(i)}}:null}function qf(){if(this.count--,this.count===0&&(this.imgCount===0||!this.waitingForImages)){if(this.stylesheets)Yf(this,this.stylesheets);else if(this.unsuspend){var e=this.unsuspend;this.unsuspend=null,e()}}}var Jf=null;function Yf(e,t){e.stylesheets=null,e.unsuspend!==null&&(e.count++,Jf=new Map,t.forEach(Xf,e),Jf=null,qf.call(e))}function Xf(e,t){if(!(t.state.loading&4)){var n=Jf.get(e);if(n)var r=n.get(null);else{n=new Map,Jf.set(e,n);for(var i=e.querySelectorAll(`link[data-precedence],style[data-precedence]`),a=0;a<i.length;a++){var o=i[a];(o.nodeName===`LINK`||o.getAttribute(`media`)!==`not all`)&&(n.set(o.dataset.precedence,o),r=o)}r&&n.set(null,r)}i=t.instance,o=i.getAttribute(`data-precedence`),a=n.get(o)||r,a===r&&n.set(null,i),n.set(o,i),this.count++,r=qf.bind(this),i.addEventListener(`load`,r),i.addEventListener(`error`,r),a?a.parentNode.insertBefore(i,a.nextSibling):(e=e.nodeType===9?e.head:e,e.insertBefore(i,e.firstChild)),t.state.loading|=4}}var Zf={$$typeof:C,Provider:null,Consumer:null,_currentValue:R,_currentValue2:R,_threadCount:0};function Qf(e,t,n,r,i,a,o,s,c){this.tag=1,this.containerInfo=e,this.pingCache=this.current=this.pendingChildren=null,this.timeoutHandle=-1,this.callbackNode=this.next=this.pendingContext=this.context=this.cancelPendingCommit=null,this.callbackPriority=0,this.expirationTimes=Ge(-1),this.entangledLanes=this.shellSuspendCounter=this.errorRecoveryDisabledLanes=this.expiredLanes=this.warmLanes=this.pingedLanes=this.suspendedLanes=this.pendingLanes=0,this.entanglements=Ge(0),this.hiddenUpdates=Ge(null),this.identifierPrefix=r,this.onUncaughtError=i,this.onCaughtError=a,this.onRecoverableError=o,this.pooledCache=null,this.pooledCacheLanes=0,this.formState=c,this.incompleteTransitions=new Map}function $f(e,t,n,r,i,a,o,s,c,l,u,d){return e=new Qf(e,t,n,o,c,l,u,d,s),t=1,!0===a&&(t|=24),a=ni(3,null,null,t),e.current=a,a.stateNode=e,t=ra(),t.refCount++,e.pooledCache=t,t.refCount++,a.memoizedState={element:r,isDehydrated:n,cache:t},Ia(a),e}function ep(e){return e?(e=ei,e):ei}function tp(e,t,n,r,i,a){i=ep(i),r.context===null?r.context=i:r.pendingContext=i,r=Ra(t),r.payload={element:n},a=a===void 0?null:a,a!==null&&(r.callback=a),n=za(e,r,t),n!==null&&(gu(n,e,t),Ba(n,e,t))}function np(e,t){if(e=e.memoizedState,e!==null&&e.dehydrated!==null){var n=e.retryLane;e.retryLane=n!==0&&n<t?n:t}}function rp(e,t){np(e,t),(e=e.alternate)&&np(e,t)}function ip(e){if(e.tag===13||e.tag===31){var t=Zr(e,67108864);t!==null&&gu(t,e,67108864),rp(e,67108864)}}function ap(e){if(e.tag===13||e.tag===31){var t=mu();t=Ze(t);var n=Zr(e,t);n!==null&&gu(n,e,t),rp(e,t)}}var op=!0;function sp(e,t,n,r){var i=I.T;I.T=null;var a=L.p;try{L.p=2,lp(e,t,n,r)}finally{L.p=a,I.T=i}}function cp(e,t,n,r){var i=I.T;I.T=null;var a=L.p;try{L.p=8,lp(e,t,n,r)}finally{L.p=a,I.T=i}}function lp(e,t,n,r){if(op){var i=up(r);if(i===null)Td(e,t,r,dp,n),Sp(e,r);else if(wp(i,e,t,n,r))r.stopPropagation();else if(Sp(e,r),t&4&&-1<xp.indexOf(e)){for(;i!==null;){var a=dt(i);if(a!==null)switch(a.tag){case 3:if(a=a.stateNode,a.current.memoizedState.isDehydrated){var o=Be(a.pendingLanes);if(o!==0){var s=a;for(s.pendingLanes|=2,s.entangledLanes|=2;o;){var c=1<<31-Ne(o);s.entanglements[1]|=c,o&=~c}ad(a),!(Fl&6)&&(nu=xe()+500,od(0,!1))}}break;case 31:case 13:s=Zr(a,2),s!==null&&gu(s,a,2),xu(),rp(a,2)}if(a=up(r),a===null&&Td(e,t,r,dp,n),a===i)break;i=a}i!==null&&r.stopPropagation()}else Td(e,t,r,null,n)}}function up(e){return e=Xt(e),fp(e)}var dp=null;function fp(e){if(dp=null,e=ut(e),e!==null){var t=o(e);if(t===null)e=null;else{var n=t.tag;if(n===13){if(e=s(t),e!==null)return e;e=null}else if(n===31){if(e=c(t),e!==null)return e;e=null}else if(n===3){if(t.stateNode.current.memoizedState.isDehydrated)return t.tag===3?t.stateNode.containerInfo:null;e=null}else t!==e&&(e=null)}}return dp=e,null}function pp(e){switch(e){case`beforetoggle`:case`cancel`:case`click`:case`close`:case`contextmenu`:case`copy`:case`cut`:case`auxclick`:case`dblclick`:case`dragend`:case`dragstart`:case`drop`:case`focusin`:case`focusout`:case`input`:case`invalid`:case`keydown`:case`keypress`:case`keyup`:case`mousedown`:case`mouseup`:case`paste`:case`pause`:case`play`:case`pointercancel`:case`pointerdown`:case`pointerup`:case`ratechange`:case`reset`:case`resize`:case`seeked`:case`submit`:case`toggle`:case`touchcancel`:case`touchend`:case`touchstart`:case`volumechange`:case`change`:case`selectionchange`:case`textInput`:case`compositionstart`:case`compositionend`:case`compositionupdate`:case`beforeblur`:case`afterblur`:case`beforeinput`:case`blur`:case`fullscreenchange`:case`focus`:case`hashchange`:case`popstate`:case`select`:case`selectstart`:return 2;case`drag`:case`dragenter`:case`dragexit`:case`dragleave`:case`dragover`:case`mousemove`:case`mouseout`:case`mouseover`:case`pointermove`:case`pointerout`:case`pointerover`:case`scroll`:case`touchmove`:case`wheel`:case`mouseenter`:case`mouseleave`:case`pointerenter`:case`pointerleave`:return 8;case`message`:switch(Se()){case Ce:return 2;case we:return 8;case Te:case Ee:return 32;case De:return 268435456;default:return 32}default:return 32}}var mp=!1,hp=null,gp=null,_p=null,vp=new Map,yp=new Map,bp=[],xp=`mousedown mouseup touchcancel touchend touchstart auxclick dblclick pointercancel pointerdown pointerup dragend dragstart drop compositionend compositionstart keydown keypress keyup input textInput copy cut paste click change contextmenu reset`.split(` `);function Sp(e,t){switch(e){case`focusin`:case`focusout`:hp=null;break;case`dragenter`:case`dragleave`:gp=null;break;case`mouseover`:case`mouseout`:_p=null;break;case`pointerover`:case`pointerout`:vp.delete(t.pointerId);break;case`gotpointercapture`:case`lostpointercapture`:yp.delete(t.pointerId)}}function Cp(e,t,n,r,i,a){return e===null||e.nativeEvent!==a?(e={blockedOn:t,domEventName:n,eventSystemFlags:r,nativeEvent:a,targetContainers:[i]},t!==null&&(t=dt(t),t!==null&&ip(t)),e):(e.eventSystemFlags|=r,t=e.targetContainers,i!==null&&t.indexOf(i)===-1&&t.push(i),e)}function wp(e,t,n,r,i){switch(t){case`focusin`:return hp=Cp(hp,e,t,n,r,i),!0;case`dragenter`:return gp=Cp(gp,e,t,n,r,i),!0;case`mouseover`:return _p=Cp(_p,e,t,n,r,i),!0;case`pointerover`:var a=i.pointerId;return vp.set(a,Cp(vp.get(a)||null,e,t,n,r,i)),!0;case`gotpointercapture`:return a=i.pointerId,yp.set(a,Cp(yp.get(a)||null,e,t,n,r,i)),!0}return!1}function Tp(e){var t=ut(e.target);if(t!==null){var n=o(t);if(n!==null){if(t=n.tag,t===13){if(t=s(n),t!==null){e.blockedOn=t,et(e.priority,function(){ap(n)});return}}else if(t===31){if(t=c(n),t!==null){e.blockedOn=t,et(e.priority,function(){ap(n)});return}}else if(t===3&&n.stateNode.current.memoizedState.isDehydrated){e.blockedOn=n.tag===3?n.stateNode.containerInfo:null;return}}}e.blockedOn=null}function Ep(e){if(e.blockedOn!==null)return!1;for(var t=e.targetContainers;0<t.length;){var n=up(e.nativeEvent);if(n===null){n=e.nativeEvent;var r=new n.constructor(n.type,n);Yt=r,n.target.dispatchEvent(r),Yt=null}else return t=dt(n),t!==null&&ip(t),e.blockedOn=n,!1;t.shift()}return!0}function Dp(e,t,n){Ep(e)&&n.delete(t)}function Op(){mp=!1,hp!==null&&Ep(hp)&&(hp=null),gp!==null&&Ep(gp)&&(gp=null),_p!==null&&Ep(_p)&&(_p=null),vp.forEach(Dp),yp.forEach(Dp)}function kp(e,n){e.blockedOn===n&&(e.blockedOn=null,mp||(mp=!0,t.unstable_scheduleCallback(t.unstable_NormalPriority,Op)))}var Ap=null;function jp(e){Ap!==e&&(Ap=e,t.unstable_scheduleCallback(t.unstable_NormalPriority,function(){Ap===e&&(Ap=null);for(var t=0;t<e.length;t+=3){var n=e[t],r=e[t+1],i=e[t+2];if(typeof r!=`function`){if(fp(r||n)===null)continue;break}var a=dt(n);a!==null&&(e.splice(t,3),t-=3,bs(a,{pending:!0,data:i,method:n.method,action:r},r,i))}}))}function Mp(e){function t(t){return kp(t,e)}hp!==null&&kp(hp,e),gp!==null&&kp(gp,e),_p!==null&&kp(_p,e),vp.forEach(t),yp.forEach(t);for(var n=0;n<bp.length;n++){var r=bp[n];r.blockedOn===e&&(r.blockedOn=null)}for(;0<bp.length&&(n=bp[0],n.blockedOn===null);)Tp(n),n.blockedOn===null&&bp.shift();if(n=(e.ownerDocument||e).$$reactFormReplay,n!=null)for(r=0;r<n.length;r+=3){var i=n[r],a=n[r+1],o=i[nt]||null;if(typeof a==`function`)o||jp(n);else if(o){var s=null;if(a&&a.hasAttribute(`formAction`)){if(i=a,o=a[nt]||null)s=o.formAction;else if(fp(i)!==null)continue}else s=o.action;typeof s==`function`?n[r+1]=s:(n.splice(r,3),r-=3),jp(n)}}}function Np(){function e(e){e.canIntercept&&e.info===`react-transition`&&e.intercept({handler:function(){return new Promise(function(e){return i=e})},focusReset:`manual`,scroll:`manual`})}function t(){i!==null&&(i(),i=null),r||setTimeout(n,20)}function n(){if(!r&&!navigation.transition){var e=navigation.currentEntry;e&&e.url!=null&&navigation.navigate(e.url,{state:e.getState(),info:`react-transition`,history:`replace`})}}if(typeof navigation==`object`){var r=!1,i=null;return navigation.addEventListener(`navigate`,e),navigation.addEventListener(`navigatesuccess`,t),navigation.addEventListener(`navigateerror`,t),setTimeout(n,100),function(){r=!0,navigation.removeEventListener(`navigate`,e),navigation.removeEventListener(`navigatesuccess`,t),navigation.removeEventListener(`navigateerror`,t),i!==null&&(i(),i=null)}}}function Pp(e){this._internalRoot=e}Fp.prototype.render=Pp.prototype.render=function(e){var t=this._internalRoot;if(t===null)throw Error(i(409));var n=t.current;tp(n,mu(),e,t,null,null)},Fp.prototype.unmount=Pp.prototype.unmount=function(){var e=this._internalRoot;if(e!==null){this._internalRoot=null;var t=e.containerInfo;tp(e.current,2,null,e,null,null),xu(),t[rt]=null}};function Fp(e){this._internalRoot=e}Fp.prototype.unstable_scheduleHydration=function(e){if(e){var t=$e();e={blockedOn:null,target:e,priority:t};for(var n=0;n<bp.length&&t!==0&&t<bp[n].priority;n++);bp.splice(n,0,e),n===0&&Tp(e)}};var Ip=n.version;if(Ip!==`19.2.4`)throw Error(i(527,Ip,`19.2.4`));L.findDOMNode=function(e){var t=e._reactInternals;if(t===void 0)throw typeof e.render==`function`?Error(i(188)):(e=Object.keys(e).join(`,`),Error(i(268,e)));return e=u(t),e=e===null?null:d(e),e=e===null?null:e.stateNode,e};var Lp={bundleType:0,version:`19.2.4`,rendererPackageName:`react-dom`,currentDispatcherRef:I,reconcilerVersion:`19.2.4`};if(typeof __REACT_DEVTOOLS_GLOBAL_HOOK__<`u`){var Rp=__REACT_DEVTOOLS_GLOBAL_HOOK__;if(!Rp.isDisabled&&Rp.supportsFiber)try{Ae=Rp.inject(Lp),je=Rp}catch{}}e.createRoot=function(e,t){if(!a(e))throw Error(i(299));var n=!1,r=``,o=eee,s=Us,c=Ws;return t!=null&&(!0===t.unstable_strictMode&&(n=!0),t.identifierPrefix!==void 0&&(r=t.identifierPrefix),t.onUncaughtError!==void 0&&(o=t.onUncaughtError),t.onCaughtError!==void 0&&(s=t.onCaughtError),t.onRecoverableError!==void 0&&(c=t.onRecoverableError)),t=$f(e,1,!1,null,null,n,r,null,o,s,c,Np),e[rt]=t.current,Cd(e),new Pp(t)}})),v=o(((e,t)=>{function n(){if(!(typeof __REACT_DEVTOOLS_GLOBAL_HOOK__>`u`||typeof __REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE!=`function`))try{__REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE(n)}catch(e){console.error(e)}}n(),t.exports=_()})),y=l(f()),b=v(),x=e=>typeof e==`string`,S=()=>{let e,t,n=new Promise((n,r)=>{e=n,t=r});return n.resolve=e,n.reject=t,n},C=e=>e==null?``:``+e,w=(e,t,n)=>{e.forEach(e=>{t[e]&&(n[e]=t[e])})},T=/###/g,E=e=>e&&e.indexOf(`###`)>-1?e.replace(T,`.`):e,D=e=>!e||x(e),O=(e,t,n)=>{let r=x(t)?t.split(`.`):t,i=0;for(;i<r.length-1;){if(D(e))return{};let t=E(r[i]);!e[t]&&n&&(e[t]=new n),e=Object.prototype.hasOwnProperty.call(e,t)?e[t]:{},++i}return D(e)?{}:{obj:e,k:E(r[i])}},k=(e,t,n)=>{let{obj:r,k:i}=O(e,t,Object);if(r!==void 0||t.length===1){r[i]=n;return}let a=t[t.length-1],o=t.slice(0,t.length-1),s=O(e,o,Object);for(;s.obj===void 0&&o.length;)a=`${o[o.length-1]}.${a}`,o=o.slice(0,o.length-1),s=O(e,o,Object),s?.obj&&s.obj[`${s.k}.${a}`]!==void 0&&(s.obj=void 0);s.obj[`${s.k}.${a}`]=n},A=(e,t,n,r)=>{let{obj:i,k:a}=O(e,t,Object);i[a]=i[a]||[],i[a].push(n)},j=(e,t)=>{let{obj:n,k:r}=O(e,t);if(n&&Object.prototype.hasOwnProperty.call(n,r))return n[r]},M=(e,t,n)=>{let r=j(e,n);return r===void 0?j(t,n):r},N=(e,t,n)=>{for(let r in t)r!==`__proto__`&&r!==`constructor`&&(r in e?x(e[r])||e[r]instanceof String||x(t[r])||t[r]instanceof String?n&&(e[r]=t[r]):N(e[r],t[r],n):e[r]=t[r]);return e},P=e=>e.replace(/[\-\[\]\/\{\}\(\)\*\+\?\.\\\^\$\|]/g,`\\$&`),F={"&":`&amp;`,"<":`&lt;`,">":`&gt;`,'"':`&quot;`,"'":`&#39;`,"/":`&#x2F;`},I=e=>x(e)?e.replace(/[&<>"'\/]/g,e=>F[e]):e,L=class{constructor(e){this.capacity=e,this.regExpMap=new Map,this.regExpQueue=[]}getRegExp(e){let t=this.regExpMap.get(e);if(t!==void 0)return t;let n=new RegExp(e);return this.regExpQueue.length===this.capacity&&this.regExpMap.delete(this.regExpQueue.shift()),this.regExpMap.set(e,n),this.regExpQueue.push(e),n}},R=[` `,`,`,`?`,`!`,`;`],z=new L(20),B=(e,t,n)=>{t||=``,n||=``;let r=R.filter(e=>t.indexOf(e)<0&&n.indexOf(e)<0);if(r.length===0)return!0;let i=z.getRegExp(`(${r.map(e=>e===`?`?`\\?`:e).join(`|`)})`),a=!i.test(e);if(!a){let t=e.indexOf(n);t>0&&!i.test(e.substring(0,t))&&(a=!0)}return a},V=(e,t,n=`.`)=>{if(!e)return;if(e[t])return Object.prototype.hasOwnProperty.call(e,t)?e[t]:void 0;let r=t.split(n),i=e;for(let e=0;e<r.length;){if(!i||typeof i!=`object`)return;let t,a=``;for(let o=e;o<r.length;++o)if(o!==e&&(a+=n),a+=r[o],t=i[a],t!==void 0){if([`string`,`number`,`boolean`].indexOf(typeof t)>-1&&o<r.length-1)continue;e+=o-e+1;break}i=t}return i},ee=e=>e?.replace(`_`,`-`),te={type:`logger`,log(e){this.output(`log`,e)},warn(e){this.output(`warn`,e)},error(e){this.output(`error`,e)},output(e,t){console?.[e]?.apply?.(console,t)}},ne=new class e{constructor(e,t={}){this.init(e,t)}init(e,t={}){this.prefix=t.prefix||`i18next:`,this.logger=e||te,this.options=t,this.debug=t.debug}log(...e){return this.forward(e,`log`,``,!0)}warn(...e){return this.forward(e,`warn`,``,!0)}error(...e){return this.forward(e,`error`,``)}deprecate(...e){return this.forward(e,`warn`,`WARNING DEPRECATED: `,!0)}forward(e,t,n,r){return r&&!this.debug?null:(x(e[0])&&(e[0]=`${n}${this.prefix} ${e[0]}`),this.logger[t](e))}create(t){return new e(this.logger,{prefix:`${this.prefix}:${t}:`,...this.options})}clone(t){return t||=this.options,t.prefix=t.prefix||this.prefix,new e(this.logger,t)}},re=class{constructor(){this.observers={}}on(e,t){return e.split(` `).forEach(e=>{this.observers[e]||(this.observers[e]=new Map);let n=this.observers[e].get(t)||0;this.observers[e].set(t,n+1)}),this}off(e,t){if(this.observers[e]){if(!t){delete this.observers[e];return}this.observers[e].delete(t)}}emit(e,...t){this.observers[e]&&Array.from(this.observers[e].entries()).forEach(([e,n])=>{for(let r=0;r<n;r++)e(...t)}),this.observers[`*`]&&Array.from(this.observers[`*`].entries()).forEach(([n,r])=>{for(let i=0;i<r;i++)n.apply(n,[e,...t])})}},ie=class extends re{constructor(e,t={ns:[`translation`],defaultNS:`translation`}){super(),this.data=e||{},this.options=t,this.options.keySeparator===void 0&&(this.options.keySeparator=`.`),this.options.ignoreJSONStructure===void 0&&(this.options.ignoreJSONStructure=!0)}addNamespaces(e){this.options.ns.indexOf(e)<0&&this.options.ns.push(e)}removeNamespaces(e){let t=this.options.ns.indexOf(e);t>-1&&this.options.ns.splice(t,1)}getResource(e,t,n,r={}){let i=r.keySeparator===void 0?this.options.keySeparator:r.keySeparator,a=r.ignoreJSONStructure===void 0?this.options.ignoreJSONStructure:r.ignoreJSONStructure,o;e.indexOf(`.`)>-1?o=e.split(`.`):(o=[e,t],n&&(Array.isArray(n)?o.push(...n):x(n)&&i?o.push(...n.split(i)):o.push(n)));let s=j(this.data,o);return!s&&!t&&!n&&e.indexOf(`.`)>-1&&(e=o[0],t=o[1],n=o.slice(2).join(`.`)),s||!a||!x(n)?s:V(this.data?.[e]?.[t],n,i)}addResource(e,t,n,r,i={silent:!1}){let a=i.keySeparator===void 0?this.options.keySeparator:i.keySeparator,o=[e,t];n&&(o=o.concat(a?n.split(a):n)),e.indexOf(`.`)>-1&&(o=e.split(`.`),r=t,t=o[1]),this.addNamespaces(t),k(this.data,o,r),i.silent||this.emit(`added`,e,t,n,r)}addResources(e,t,n,r={silent:!1}){for(let r in n)(x(n[r])||Array.isArray(n[r]))&&this.addResource(e,t,r,n[r],{silent:!0});r.silent||this.emit(`added`,e,t,n)}addResourceBundle(e,t,n,r,i,a={silent:!1,skipCopy:!1}){let o=[e,t];e.indexOf(`.`)>-1&&(o=e.split(`.`),r=n,n=t,t=o[1]),this.addNamespaces(t);let s=j(this.data,o)||{};a.skipCopy||(n=JSON.parse(JSON.stringify(n))),r?N(s,n,i):s={...s,...n},k(this.data,o,s),a.silent||this.emit(`added`,e,t,n)}removeResourceBundle(e,t){this.hasResourceBundle(e,t)&&delete this.data[e][t],this.removeNamespaces(t),this.emit(`removed`,e,t)}hasResourceBundle(e,t){return this.getResource(e,t)!==void 0}getResourceBundle(e,t){return t||=this.options.defaultNS,this.getResource(e,t)}getDataByLanguage(e){return this.data[e]}hasLanguageSomeTranslations(e){let t=this.getDataByLanguage(e);return!!(t&&Object.keys(t)||[]).find(e=>t[e]&&Object.keys(t[e]).length>0)}toJSON(){return this.data}},ae={processors:{},addPostProcessor(e){this.processors[e.name]=e},handle(e,t,n,r,i){return e.forEach(e=>{t=this.processors[e]?.process(t,n,r,i)??t}),t}},oe=Symbol(`i18next/PATH_KEY`);function se(){let e=[],t=Object.create(null),n;return t.get=(r,i)=>(n?.revoke?.(),i===oe?e:(e.push(i),n=Proxy.revocable(r,t),n.proxy)),Proxy.revocable(Object.create(null),t).proxy}function H(e,t){let{[oe]:n}=e(se());return n.join(t?.keySeparator??`.`)}var ce={},le=e=>!x(e)&&typeof e!=`boolean`&&typeof e!=`number`,ue=class e extends re{constructor(e,t={}){super(),w([`resourceStore`,`languageUtils`,`pluralResolver`,`interpolator`,`backendConnector`,`i18nFormat`,`utils`],e,this),this.options=t,this.options.keySeparator===void 0&&(this.options.keySeparator=`.`),this.logger=ne.create(`translator`)}changeLanguage(e){e&&(this.language=e)}exists(e,t={interpolation:{}}){let n={...t};if(e==null)return!1;let r=this.resolve(e,n);if(r?.res===void 0)return!1;let i=le(r.res);return!(n.returnObjects===!1&&i)}extractFromKey(e,t){let n=t.nsSeparator===void 0?this.options.nsSeparator:t.nsSeparator;n===void 0&&(n=`:`);let r=t.keySeparator===void 0?this.options.keySeparator:t.keySeparator,i=t.ns||this.options.defaultNS||[],a=n&&e.indexOf(n)>-1,o=!this.options.userDefinedKeySeparator&&!t.keySeparator&&!this.options.userDefinedNsSeparator&&!t.nsSeparator&&!B(e,n,r);if(a&&!o){let t=e.match(this.interpolator.nestingRegexp);if(t&&t.length>0)return{key:e,namespaces:x(i)?[i]:i};let a=e.split(n);(n!==r||n===r&&this.options.ns.indexOf(a[0])>-1)&&(i=a.shift()),e=a.join(r)}return{key:e,namespaces:x(i)?[i]:i}}translate(t,n,r){let i=typeof n==`object`?{...n}:n;if(typeof i!=`object`&&this.options.overloadTranslationOptionHandler&&(i=this.options.overloadTranslationOptionHandler(arguments)),typeof i==`object`&&(i={...i}),i||={},t==null)return``;typeof t==`function`&&(t=H(t,{...this.options,...i})),Array.isArray(t)||(t=[String(t)]);let a=i.returnDetails===void 0?this.options.returnDetails:i.returnDetails,o=i.keySeparator===void 0?this.options.keySeparator:i.keySeparator,{key:s,namespaces:c}=this.extractFromKey(t[t.length-1],i),l=c[c.length-1],u=i.nsSeparator===void 0?this.options.nsSeparator:i.nsSeparator;u===void 0&&(u=`:`);let d=i.lng||this.language,f=i.appendNamespaceToCIMode||this.options.appendNamespaceToCIMode;if(d?.toLowerCase()===`cimode`)return f?a?{res:`${l}${u}${s}`,usedKey:s,exactUsedKey:s,usedLng:d,usedNS:l,usedParams:this.getUsedParamsDetails(i)}:`${l}${u}${s}`:a?{res:s,usedKey:s,exactUsedKey:s,usedLng:d,usedNS:l,usedParams:this.getUsedParamsDetails(i)}:s;let p=this.resolve(t,i),m=p?.res,h=p?.usedKey||s,g=p?.exactUsedKey||s,_=[`[object Number]`,`[object Function]`,`[object RegExp]`],v=i.joinArrays===void 0?this.options.joinArrays:i.joinArrays,y=!this.i18nFormat||this.i18nFormat.handleAsObject,b=i.count!==void 0&&!x(i.count),S=e.hasDefaultValue(i),C=b?this.pluralResolver.getSuffix(d,i.count,i):``,w=i.ordinal&&b?this.pluralResolver.getSuffix(d,i.count,{ordinal:!1}):``,T=b&&!i.ordinal&&i.count===0,E=T&&i[`defaultValue${this.options.pluralSeparator}zero`]||i[`defaultValue${C}`]||i[`defaultValue${w}`]||i.defaultValue,D=m;y&&!m&&S&&(D=E);let O=le(D),k=Object.prototype.toString.apply(D);if(y&&D&&O&&_.indexOf(k)<0&&!(x(v)&&Array.isArray(D))){if(!i.returnObjects&&!this.options.returnObjects){this.options.returnedObjectHandler||this.logger.warn(`accessing an object - but returnObjects options is not enabled!`);let e=this.options.returnedObjectHandler?this.options.returnedObjectHandler(h,D,{...i,ns:c}):`key '${s} (${this.language})' returned an object instead of string.`;return a?(p.res=e,p.usedParams=this.getUsedParamsDetails(i),p):e}if(o){let e=Array.isArray(D),t=e?[]:{},n=e?g:h;for(let e in D)if(Object.prototype.hasOwnProperty.call(D,e)){let r=`${n}${o}${e}`;S&&!m?t[e]=this.translate(r,{...i,defaultValue:le(E)?E[e]:void 0,joinArrays:!1,ns:c}):t[e]=this.translate(r,{...i,joinArrays:!1,ns:c}),t[e]===r&&(t[e]=D[e])}m=t}}else if(y&&x(v)&&Array.isArray(m))m=m.join(v),m&&=this.extendTranslation(m,t,i,r);else{let e=!1,n=!1;!this.isValidLookup(m)&&S&&(e=!0,m=E),this.isValidLookup(m)||(n=!0,m=s);let a=(i.missingKeyNoValueFallbackToKey||this.options.missingKeyNoValueFallbackToKey)&&n?void 0:m,c=S&&E!==m&&this.options.updateMissing;if(n||e||c){if(this.logger.log(c?`updateKey`:`missingKey`,d,l,s,c?E:m),o){let e=this.resolve(s,{...i,keySeparator:!1});e&&e.res&&this.logger.warn(`Seems the loaded translations were in flat JSON format instead of nested. Either set keySeparator: false on init or make sure your translations are published in nested format.`)}let e=[],t=this.languageUtils.getFallbackCodes(this.options.fallbackLng,i.lng||this.language);if(this.options.saveMissingTo===`fallback`&&t&&t[0])for(let n=0;n<t.length;n++)e.push(t[n]);else this.options.saveMissingTo===`all`?e=this.languageUtils.toResolveHierarchy(i.lng||this.language):e.push(i.lng||this.language);let n=(e,t,n)=>{let r=S&&n!==m?n:a;this.options.missingKeyHandler?this.options.missingKeyHandler(e,l,t,r,c,i):this.backendConnector?.saveMissing&&this.backendConnector.saveMissing(e,l,t,r,c,i),this.emit(`missingKey`,e,l,t,m)};this.options.saveMissing&&(this.options.saveMissingPlurals&&b?e.forEach(e=>{let t=this.pluralResolver.getSuffixes(e,i);T&&i[`defaultValue${this.options.pluralSeparator}zero`]&&t.indexOf(`${this.options.pluralSeparator}zero`)<0&&t.push(`${this.options.pluralSeparator}zero`),t.forEach(t=>{n([e],s+t,i[`defaultValue${t}`]||E)})}):n(e,s,E))}m=this.extendTranslation(m,t,i,p,r),n&&m===s&&this.options.appendNamespaceToMissingKey&&(m=`${l}${u}${s}`),(n||e)&&this.options.parseMissingKeyHandler&&(m=this.options.parseMissingKeyHandler(this.options.appendNamespaceToMissingKey?`${l}${u}${s}`:s,e?m:void 0,i))}return a?(p.res=m,p.usedParams=this.getUsedParamsDetails(i),p):m}extendTranslation(e,t,n,r,i){if(this.i18nFormat?.parse)e=this.i18nFormat.parse(e,{...this.options.interpolation.defaultVariables,...n},n.lng||this.language||r.usedLng,r.usedNS,r.usedKey,{resolved:r});else if(!n.skipInterpolation){n.interpolation&&this.interpolator.init({...n,interpolation:{...this.options.interpolation,...n.interpolation}});let a=x(e)&&(n?.interpolation?.skipOnVariables===void 0?this.options.interpolation.skipOnVariables:n.interpolation.skipOnVariables),o;if(a){let t=e.match(this.interpolator.nestingRegexp);o=t&&t.length}let s=n.replace&&!x(n.replace)?n.replace:n;if(this.options.interpolation.defaultVariables&&(s={...this.options.interpolation.defaultVariables,...s}),e=this.interpolator.interpolate(e,s,n.lng||this.language||r.usedLng,n),a){let t=e.match(this.interpolator.nestingRegexp),r=t&&t.length;o<r&&(n.nest=!1)}!n.lng&&r&&r.res&&(n.lng=this.language||r.usedLng),n.nest!==!1&&(e=this.interpolator.nest(e,(...e)=>i?.[0]===e[0]&&!n.context?(this.logger.warn(`It seems you are nesting recursively key: ${e[0]} in key: ${t[0]}`),null):this.translate(...e,t),n)),n.interpolation&&this.interpolator.reset()}let a=n.postProcess||this.options.postProcess,o=x(a)?[a]:a;return e!=null&&o?.length&&n.applyPostProcessor!==!1&&(e=ae.handle(o,e,t,this.options&&this.options.postProcessPassResolved?{i18nResolved:{...r,usedParams:this.getUsedParamsDetails(n)},...n}:n,this)),e}resolve(e,t={}){let n,r,i,a,o;return x(e)&&(e=[e]),e.forEach(e=>{if(this.isValidLookup(n))return;let s=this.extractFromKey(e,t),c=s.key;r=c;let l=s.namespaces;this.options.fallbackNS&&(l=l.concat(this.options.fallbackNS));let u=t.count!==void 0&&!x(t.count),d=u&&!t.ordinal&&t.count===0,f=t.context!==void 0&&(x(t.context)||typeof t.context==`number`)&&t.context!==``,p=t.lngs?t.lngs:this.languageUtils.toResolveHierarchy(t.lng||this.language,t.fallbackLng);l.forEach(e=>{this.isValidLookup(n)||(o=e,!ce[`${p[0]}-${e}`]&&this.utils?.hasLoadedNamespace&&!this.utils?.hasLoadedNamespace(o)&&(ce[`${p[0]}-${e}`]=!0,this.logger.warn(`key "${r}" for languages "${p.join(`, `)}" won't get resolved as namespace "${o}" was not yet loaded`,`This means something IS WRONG in your setup. You access the t function before i18next.init / i18next.loadNamespace / i18next.changeLanguage was done. Wait for the callback or Promise to resolve before accessing it!!!`)),p.forEach(r=>{if(this.isValidLookup(n))return;a=r;let o=[c];if(this.i18nFormat?.addLookupKeys)this.i18nFormat.addLookupKeys(o,c,r,e,t);else{let e;u&&(e=this.pluralResolver.getSuffix(r,t.count,t));let n=`${this.options.pluralSeparator}zero`,i=`${this.options.pluralSeparator}ordinal${this.options.pluralSeparator}`;if(u&&(t.ordinal&&e.indexOf(i)===0&&o.push(c+e.replace(i,this.options.pluralSeparator)),o.push(c+e),d&&o.push(c+n)),f){let r=`${c}${this.options.contextSeparator||`_`}${t.context}`;o.push(r),u&&(t.ordinal&&e.indexOf(i)===0&&o.push(r+e.replace(i,this.options.pluralSeparator)),o.push(r+e),d&&o.push(r+n))}}let s;for(;s=o.pop();)this.isValidLookup(n)||(i=s,n=this.getResource(r,e,s,t))}))})}),{res:n,usedKey:r,exactUsedKey:i,usedLng:a,usedNS:o}}isValidLookup(e){return e!==void 0&&!(!this.options.returnNull&&e===null)&&!(!this.options.returnEmptyString&&e===``)}getResource(e,t,n,r={}){return this.i18nFormat?.getResource?this.i18nFormat.getResource(e,t,n,r):this.resourceStore.getResource(e,t,n,r)}getUsedParamsDetails(e={}){let t=[`defaultValue`,`ordinal`,`context`,`replace`,`lng`,`lngs`,`fallbackLng`,`ns`,`keySeparator`,`nsSeparator`,`returnObjects`,`returnDetails`,`joinArrays`,`postProcess`,`interpolation`],n=e.replace&&!x(e.replace),r=n?e.replace:e;if(n&&e.count!==void 0&&(r.count=e.count),this.options.interpolation.defaultVariables&&(r={...this.options.interpolation.defaultVariables,...r}),!n){r={...r};for(let e of t)delete r[e]}return r}static hasDefaultValue(e){for(let t in e)if(Object.prototype.hasOwnProperty.call(e,t)&&t.substring(0,12)===`defaultValue`&&e[t]!==void 0)return!0;return!1}},de=class{constructor(e){this.options=e,this.supportedLngs=this.options.supportedLngs||!1,this.logger=ne.create(`languageUtils`)}getScriptPartFromCode(e){if(e=ee(e),!e||e.indexOf(`-`)<0)return null;let t=e.split(`-`);return t.length===2||(t.pop(),t[t.length-1].toLowerCase()===`x`)?null:this.formatLanguageCode(t.join(`-`))}getLanguagePartFromCode(e){if(e=ee(e),!e||e.indexOf(`-`)<0)return e;let t=e.split(`-`);return this.formatLanguageCode(t[0])}formatLanguageCode(e){if(x(e)&&e.indexOf(`-`)>-1){let t;try{t=Intl.getCanonicalLocales(e)[0]}catch{}return t&&this.options.lowerCaseLng&&(t=t.toLowerCase()),t||(this.options.lowerCaseLng?e.toLowerCase():e)}return this.options.cleanCode||this.options.lowerCaseLng?e.toLowerCase():e}isSupportedCode(e){return(this.options.load===`languageOnly`||this.options.nonExplicitSupportedLngs)&&(e=this.getLanguagePartFromCode(e)),!this.supportedLngs||!this.supportedLngs.length||this.supportedLngs.indexOf(e)>-1}getBestMatchFromCodes(e){if(!e)return null;let t;return e.forEach(e=>{if(t)return;let n=this.formatLanguageCode(e);(!this.options.supportedLngs||this.isSupportedCode(n))&&(t=n)}),!t&&this.options.supportedLngs&&e.forEach(e=>{if(t)return;let n=this.getScriptPartFromCode(e);if(this.isSupportedCode(n))return t=n;let r=this.getLanguagePartFromCode(e);if(this.isSupportedCode(r))return t=r;t=this.options.supportedLngs.find(e=>{if(e===r||!(e.indexOf(`-`)<0&&r.indexOf(`-`)<0)&&(e.indexOf(`-`)>0&&r.indexOf(`-`)<0&&e.substring(0,e.indexOf(`-`))===r||e.indexOf(r)===0&&r.length>1))return e})}),t||=this.getFallbackCodes(this.options.fallbackLng)[0],t}getFallbackCodes(e,t){if(!e)return[];if(typeof e==`function`&&(e=e(t)),x(e)&&(e=[e]),Array.isArray(e))return e;if(!t)return e.default||[];let n=e[t];return n||=e[this.getScriptPartFromCode(t)],n||=e[this.formatLanguageCode(t)],n||=e[this.getLanguagePartFromCode(t)],n||=e.default,n||[]}toResolveHierarchy(e,t){let n=this.getFallbackCodes((t===!1?[]:t)||this.options.fallbackLng||[],e),r=[],i=e=>{e&&(this.isSupportedCode(e)?r.push(e):this.logger.warn(`rejecting language code not found in supportedLngs: ${e}`))};return x(e)&&(e.indexOf(`-`)>-1||e.indexOf(`_`)>-1)?(this.options.load!==`languageOnly`&&i(this.formatLanguageCode(e)),this.options.load!==`languageOnly`&&this.options.load!==`currentOnly`&&i(this.getScriptPartFromCode(e)),this.options.load!==`currentOnly`&&i(this.getLanguagePartFromCode(e))):x(e)&&i(this.formatLanguageCode(e)),n.forEach(e=>{r.indexOf(e)<0&&i(this.formatLanguageCode(e))}),r}},fe={zero:0,one:1,two:2,few:3,many:4,other:5},pe={select:e=>e===1?`one`:`other`,resolvedOptions:()=>({pluralCategories:[`one`,`other`]})},me=class{constructor(e,t={}){this.languageUtils=e,this.options=t,this.logger=ne.create(`pluralResolver`),this.pluralRulesCache={}}addRule(e,t){this.rules[e]=t}clearCache(){this.pluralRulesCache={}}getRule(e,t={}){let n=ee(e===`dev`?`en`:e),r=t.ordinal?`ordinal`:`cardinal`,i=JSON.stringify({cleanedCode:n,type:r});if(i in this.pluralRulesCache)return this.pluralRulesCache[i];let a;try{a=new Intl.PluralRules(n,{type:r})}catch{if(!Intl)return this.logger.error(`No Intl support, please use an Intl polyfill!`),pe;if(!e.match(/-|_/))return pe;let n=this.languageUtils.getLanguagePartFromCode(e);a=this.getRule(n,t)}return this.pluralRulesCache[i]=a,a}needsPlural(e,t={}){let n=this.getRule(e,t);return n||=this.getRule(`dev`,t),n?.resolvedOptions().pluralCategories.length>1}getPluralFormsOfKey(e,t,n={}){return this.getSuffixes(e,n).map(e=>`${t}${e}`)}getSuffixes(e,t={}){let n=this.getRule(e,t);return n||=this.getRule(`dev`,t),n?n.resolvedOptions().pluralCategories.sort((e,t)=>fe[e]-fe[t]).map(e=>`${this.options.prepend}${t.ordinal?`ordinal${this.options.prepend}`:``}${e}`):[]}getSuffix(e,t,n={}){let r=this.getRule(e,n);return r?`${this.options.prepend}${n.ordinal?`ordinal${this.options.prepend}`:``}${r.select(t)}`:(this.logger.warn(`no plural rule found for: ${e}`),this.getSuffix(`dev`,t,n))}},he=(e,t,n,r=`.`,i=!0)=>{let a=M(e,t,n);return!a&&i&&x(n)&&(a=V(e,n,r),a===void 0&&(a=V(t,n,r))),a},ge=e=>e.replace(/\$/g,`$$$$`),_e=class{constructor(e={}){this.logger=ne.create(`interpolator`),this.options=e,this.format=e?.interpolation?.format||(e=>e),this.init(e)}init(e={}){e.interpolation||={escapeValue:!0};let{escape:t,escapeValue:n,useRawValueToEscape:r,prefix:i,prefixEscaped:a,suffix:o,suffixEscaped:s,formatSeparator:c,unescapeSuffix:l,unescapePrefix:u,nestingPrefix:d,nestingPrefixEscaped:f,nestingSuffix:p,nestingSuffixEscaped:m,nestingOptionsSeparator:h,maxReplaces:g,alwaysFormat:_}=e.interpolation;this.escape=t===void 0?I:t,this.escapeValue=n===void 0?!0:n,this.useRawValueToEscape=r===void 0?!1:r,this.prefix=i?P(i):a||`{{`,this.suffix=o?P(o):s||`}}`,this.formatSeparator=c||`,`,this.unescapePrefix=l?``:u||`-`,this.unescapeSuffix=this.unescapePrefix?``:l||``,this.nestingPrefix=d?P(d):f||P(`$t(`),this.nestingSuffix=p?P(p):m||P(`)`),this.nestingOptionsSeparator=h||`,`,this.maxReplaces=g||1e3,this.alwaysFormat=_===void 0?!1:_,this.resetRegExp()}reset(){this.options&&this.init(this.options)}resetRegExp(){let e=(e,t)=>e?.source===t?(e.lastIndex=0,e):new RegExp(t,`g`);this.regexp=e(this.regexp,`${this.prefix}(.+?)${this.suffix}`),this.regexpUnescape=e(this.regexpUnescape,`${this.prefix}${this.unescapePrefix}(.+?)${this.unescapeSuffix}${this.suffix}`),this.nestingRegexp=e(this.nestingRegexp,`${this.nestingPrefix}((?:[^()"']+|"[^"]*"|'[^']*'|\\((?:[^()]|"[^"]*"|'[^']*')*\\))*?)${this.nestingSuffix}`)}interpolate(e,t,n,r){let i,a,o,s=this.options&&this.options.interpolation&&this.options.interpolation.defaultVariables||{},c=e=>{if(e.indexOf(this.formatSeparator)<0){let i=he(t,s,e,this.options.keySeparator,this.options.ignoreJSONStructure);return this.alwaysFormat?this.format(i,void 0,n,{...r,...t,interpolationkey:e}):i}let i=e.split(this.formatSeparator),a=i.shift().trim(),o=i.join(this.formatSeparator).trim();return this.format(he(t,s,a,this.options.keySeparator,this.options.ignoreJSONStructure),o,n,{...r,...t,interpolationkey:a})};this.resetRegExp();let l=r?.missingInterpolationHandler||this.options.missingInterpolationHandler,u=r?.interpolation?.skipOnVariables===void 0?this.options.interpolation.skipOnVariables:r.interpolation.skipOnVariables;return[{regex:this.regexpUnescape,safeValue:e=>ge(e)},{regex:this.regexp,safeValue:e=>this.escapeValue?ge(this.escape(e)):ge(e)}].forEach(t=>{for(o=0;i=t.regex.exec(e);){let n=i[1].trim();if(a=c(n),a===void 0)if(typeof l==`function`){let t=l(e,i,r);a=x(t)?t:``}else if(r&&Object.prototype.hasOwnProperty.call(r,n))a=``;else if(u){a=i[0];continue}else this.logger.warn(`missed to pass in variable ${n} for interpolating ${e}`),a=``;else !x(a)&&!this.useRawValueToEscape&&(a=C(a));let s=t.safeValue(a);if(e=e.replace(i[0],s),u?(t.regex.lastIndex+=a.length,t.regex.lastIndex-=i[0].length):t.regex.lastIndex=0,o++,o>=this.maxReplaces)break}}),e}nest(e,t,n={}){let r,i,a,o=(e,t)=>{let n=this.nestingOptionsSeparator;if(e.indexOf(n)<0)return e;let r=e.split(RegExp(`${n}[ ]*{`)),i=`{${r[1]}`;e=r[0],i=this.interpolate(i,a);let o=i.match(/'/g),s=i.match(/"/g);((o?.length??0)%2==0&&!s||s.length%2!=0)&&(i=i.replace(/'/g,`"`));try{a=JSON.parse(i),t&&(a={...t,...a})}catch(t){return this.logger.warn(`failed parsing options string in nesting for key ${e}`,t),`${e}${n}${i}`}return a.defaultValue&&a.defaultValue.indexOf(this.prefix)>-1&&delete a.defaultValue,e};for(;r=this.nestingRegexp.exec(e);){let s=[];a={...n},a=a.replace&&!x(a.replace)?a.replace:a,a.applyPostProcessor=!1,delete a.defaultValue;let c=/{.*}/.test(r[1])?r[1].lastIndexOf(`}`)+1:r[1].indexOf(this.formatSeparator);if(c!==-1&&(s=r[1].slice(c).split(this.formatSeparator).map(e=>e.trim()).filter(Boolean),r[1]=r[1].slice(0,c)),i=t(o.call(this,r[1].trim(),a),a),i&&r[0]===e&&!x(i))return i;x(i)||(i=C(i)),i||=(this.logger.warn(`missed to resolve ${r[1]} for nesting ${e}`),``),s.length&&(i=s.reduce((e,t)=>this.format(e,t,n.lng,{...n,interpolationkey:r[1].trim()}),i.trim())),e=e.replace(r[0],i),this.regexp.lastIndex=0}return e}},ve=e=>{let t=e.toLowerCase().trim(),n={};if(e.indexOf(`(`)>-1){let r=e.split(`(`);t=r[0].toLowerCase().trim();let i=r[1].substring(0,r[1].length-1);t===`currency`&&i.indexOf(`:`)<0?n.currency||=i.trim():t===`relativetime`&&i.indexOf(`:`)<0?n.range||=i.trim():i.split(`;`).forEach(e=>{if(e){let[t,...r]=e.split(`:`),i=r.join(`:`).trim().replace(/^'+|'+$/g,``),a=t.trim();n[a]||(n[a]=i),i===`false`&&(n[a]=!1),i===`true`&&(n[a]=!0),isNaN(i)||(n[a]=parseInt(i,10))}})}return{formatName:t,formatOptions:n}},ye=e=>{let t={};return(n,r,i)=>{let a=i;i&&i.interpolationkey&&i.formatParams&&i.formatParams[i.interpolationkey]&&i[i.interpolationkey]&&(a={...a,[i.interpolationkey]:void 0});let o=r+JSON.stringify(a),s=t[o];return s||(s=e(ee(r),i),t[o]=s),s(n)}},be=e=>(t,n,r)=>e(ee(n),r)(t),xe=class{constructor(e={}){this.logger=ne.create(`formatter`),this.options=e,this.init(e)}init(e,t={interpolation:{}}){this.formatSeparator=t.interpolation.formatSeparator||`,`;let n=t.cacheInBuiltFormats?ye:be;this.formats={number:n((e,t)=>{let n=new Intl.NumberFormat(e,{...t});return e=>n.format(e)}),currency:n((e,t)=>{let n=new Intl.NumberFormat(e,{...t,style:`currency`});return e=>n.format(e)}),datetime:n((e,t)=>{let n=new Intl.DateTimeFormat(e,{...t});return e=>n.format(e)}),relativetime:n((e,t)=>{let n=new Intl.RelativeTimeFormat(e,{...t});return e=>n.format(e,t.range||`day`)}),list:n((e,t)=>{let n=new Intl.ListFormat(e,{...t});return e=>n.format(e)})}}add(e,t){this.formats[e.toLowerCase().trim()]=t}addCached(e,t){this.formats[e.toLowerCase().trim()]=ye(t)}format(e,t,n,r={}){let i=t.split(this.formatSeparator);if(i.length>1&&i[0].indexOf(`(`)>1&&i[0].indexOf(`)`)<0&&i.find(e=>e.indexOf(`)`)>-1)){let e=i.findIndex(e=>e.indexOf(`)`)>-1);i[0]=[i[0],...i.splice(1,e)].join(this.formatSeparator)}return i.reduce((e,t)=>{let{formatName:i,formatOptions:a}=ve(t);if(this.formats[i]){let t=e;try{let o=r?.formatParams?.[r.interpolationkey]||{},s=o.locale||o.lng||r.locale||r.lng||n;t=this.formats[i](e,s,{...a,...r,...o})}catch(e){this.logger.warn(e)}return t}else this.logger.warn(`there was no format function for ${i}`);return e},e)}},Se=(e,t)=>{e.pending[t]!==void 0&&(delete e.pending[t],e.pendingCount--)},Ce=class extends re{constructor(e,t,n,r={}){super(),this.backend=e,this.store=t,this.services=n,this.languageUtils=n.languageUtils,this.options=r,this.logger=ne.create(`backendConnector`),this.waitingReads=[],this.maxParallelReads=r.maxParallelReads||10,this.readingCalls=0,this.maxRetries=r.maxRetries>=0?r.maxRetries:5,this.retryTimeout=r.retryTimeout>=1?r.retryTimeout:350,this.state={},this.queue=[],this.backend?.init?.(n,r.backend,r)}queueLoad(e,t,n,r){let i={},a={},o={},s={};return e.forEach(e=>{let r=!0;t.forEach(t=>{let o=`${e}|${t}`;!n.reload&&this.store.hasResourceBundle(e,t)?this.state[o]=2:this.state[o]<0||(this.state[o]===1?a[o]===void 0&&(a[o]=!0):(this.state[o]=1,r=!1,a[o]===void 0&&(a[o]=!0),i[o]===void 0&&(i[o]=!0),s[t]===void 0&&(s[t]=!0)))}),r||(o[e]=!0)}),(Object.keys(i).length||Object.keys(a).length)&&this.queue.push({pending:a,pendingCount:Object.keys(a).length,loaded:{},errors:[],callback:r}),{toLoad:Object.keys(i),pending:Object.keys(a),toLoadLanguages:Object.keys(o),toLoadNamespaces:Object.keys(s)}}loaded(e,t,n){let r=e.split(`|`),i=r[0],a=r[1];t&&this.emit(`failedLoading`,i,a,t),!t&&n&&this.store.addResourceBundle(i,a,n,void 0,void 0,{skipCopy:!0}),this.state[e]=t?-1:2,t&&n&&(this.state[e]=0);let o={};this.queue.forEach(n=>{A(n.loaded,[i],a),Se(n,e),t&&n.errors.push(t),n.pendingCount===0&&!n.done&&(Object.keys(n.loaded).forEach(e=>{o[e]||(o[e]={});let t=n.loaded[e];t.length&&t.forEach(t=>{o[e][t]===void 0&&(o[e][t]=!0)})}),n.done=!0,n.errors.length?n.callback(n.errors):n.callback())}),this.emit(`loaded`,o),this.queue=this.queue.filter(e=>!e.done)}read(e,t,n,r=0,i=this.retryTimeout,a){if(!e.length)return a(null,{});if(this.readingCalls>=this.maxParallelReads){this.waitingReads.push({lng:e,ns:t,fcName:n,tried:r,wait:i,callback:a});return}this.readingCalls++;let o=(o,s)=>{if(this.readingCalls--,this.waitingReads.length>0){let e=this.waitingReads.shift();this.read(e.lng,e.ns,e.fcName,e.tried,e.wait,e.callback)}if(o&&s&&r<this.maxRetries){setTimeout(()=>{this.read.call(this,e,t,n,r+1,i*2,a)},i);return}a(o,s)},s=this.backend[n].bind(this.backend);if(s.length===2){try{let n=s(e,t);n&&typeof n.then==`function`?n.then(e=>o(null,e)).catch(o):o(null,n)}catch(e){o(e)}return}return s(e,t,o)}prepareLoading(e,t,n={},r){if(!this.backend)return this.logger.warn(`No backend was added via i18next.use. Will not load resources.`),r&&r();x(e)&&(e=this.languageUtils.toResolveHierarchy(e)),x(t)&&(t=[t]);let i=this.queueLoad(e,t,n,r);if(!i.toLoad.length)return i.pending.length||r(),null;i.toLoad.forEach(e=>{this.loadOne(e)})}load(e,t,n){this.prepareLoading(e,t,{},n)}reload(e,t,n){this.prepareLoading(e,t,{reload:!0},n)}loadOne(e,t=``){let n=e.split(`|`),r=n[0],i=n[1];this.read(r,i,`read`,void 0,void 0,(n,a)=>{n&&this.logger.warn(`${t}loading namespace ${i} for language ${r} failed`,n),!n&&a&&this.logger.log(`${t}loaded namespace ${i} for language ${r}`,a),this.loaded(e,n,a)})}saveMissing(e,t,n,r,i,a={},o=()=>{}){if(this.services?.utils?.hasLoadedNamespace&&!this.services?.utils?.hasLoadedNamespace(t)){this.logger.warn(`did not save key "${n}" as the namespace "${t}" was not yet loaded`,`This means something IS WRONG in your setup. You access the t function before i18next.init / i18next.loadNamespace / i18next.changeLanguage was done. Wait for the callback or Promise to resolve before accessing it!!!`);return}if(!(n==null||n===``)){if(this.backend?.create){let s={...a,isUpdate:i},c=this.backend.create.bind(this.backend);if(c.length<6)try{let i;i=c.length===5?c(e,t,n,r,s):c(e,t,n,r),i&&typeof i.then==`function`?i.then(e=>o(null,e)).catch(o):o(null,i)}catch(e){o(e)}else c(e,t,n,r,o,s)}!e||!e[0]||this.store.addResource(e[0],t,n,r)}}},we=()=>({debug:!1,initAsync:!0,ns:[`translation`],defaultNS:[`translation`],fallbackLng:[`dev`],fallbackNS:!1,supportedLngs:!1,nonExplicitSupportedLngs:!1,load:`all`,preload:!1,simplifyPluralSuffix:!0,keySeparator:`.`,nsSeparator:`:`,pluralSeparator:`_`,contextSeparator:`_`,partialBundledLanguages:!1,saveMissing:!1,updateMissing:!1,saveMissingTo:`fallback`,saveMissingPlurals:!0,missingKeyHandler:!1,missingInterpolationHandler:!1,postProcess:!1,postProcessPassResolved:!1,returnNull:!1,returnEmptyString:!0,returnObjects:!1,joinArrays:!1,returnedObjectHandler:!1,parseMissingKeyHandler:!1,appendNamespaceToMissingKey:!1,appendNamespaceToCIMode:!1,overloadTranslationOptionHandler:e=>{let t={};if(typeof e[1]==`object`&&(t=e[1]),x(e[1])&&(t.defaultValue=e[1]),x(e[2])&&(t.tDescription=e[2]),typeof e[2]==`object`||typeof e[3]==`object`){let n=e[3]||e[2];Object.keys(n).forEach(e=>{t[e]=n[e]})}return t},interpolation:{escapeValue:!0,format:e=>e,prefix:`{{`,suffix:`}}`,formatSeparator:`,`,unescapePrefix:`-`,nestingPrefix:`$t(`,nestingSuffix:`)`,nestingOptionsSeparator:`,`,maxReplaces:1e3,skipOnVariables:!0},cacheInBuiltFormats:!0}),Te=e=>(x(e.ns)&&(e.ns=[e.ns]),x(e.fallbackLng)&&(e.fallbackLng=[e.fallbackLng]),x(e.fallbackNS)&&(e.fallbackNS=[e.fallbackNS]),e.supportedLngs?.indexOf?.(`cimode`)<0&&(e.supportedLngs=e.supportedLngs.concat([`cimode`])),typeof e.initImmediate==`boolean`&&(e.initAsync=e.initImmediate),e),Ee=()=>{},De=e=>{Object.getOwnPropertyNames(Object.getPrototypeOf(e)).forEach(t=>{typeof e[t]==`function`&&(e[t]=e[t].bind(e))})},Oe=class e extends re{constructor(e={},t){if(super(),this.options=Te(e),this.services={},this.logger=ne,this.modules={external:[]},De(this),t&&!this.isInitialized&&!e.isClone){if(!this.options.initAsync)return this.init(e,t),this;setTimeout(()=>{this.init(e,t)},0)}}init(e={},t){this.isInitializing=!0,typeof e==`function`&&(t=e,e={}),e.defaultNS==null&&e.ns&&(x(e.ns)?e.defaultNS=e.ns:e.ns.indexOf(`translation`)<0&&(e.defaultNS=e.ns[0]));let n=we();this.options={...n,...this.options,...Te(e)},this.options.interpolation={...n.interpolation,...this.options.interpolation},e.keySeparator!==void 0&&(this.options.userDefinedKeySeparator=e.keySeparator),e.nsSeparator!==void 0&&(this.options.userDefinedNsSeparator=e.nsSeparator);let r=e=>e?typeof e==`function`?new e:e:null;if(!this.options.isClone){this.modules.logger?ne.init(r(this.modules.logger),this.options):ne.init(null,this.options);let e;e=this.modules.formatter?this.modules.formatter:xe;let t=new de(this.options);this.store=new ie(this.options.resources,this.options);let i=this.services;i.logger=ne,i.resourceStore=this.store,i.languageUtils=t,i.pluralResolver=new me(t,{prepend:this.options.pluralSeparator,simplifyPluralSuffix:this.options.simplifyPluralSuffix}),this.options.interpolation.format&&this.options.interpolation.format!==n.interpolation.format&&this.logger.deprecate(`init: you are still using the legacy format function, please use the new approach: https://www.i18next.com/translation-function/formatting`),e&&(!this.options.interpolation.format||this.options.interpolation.format===n.interpolation.format)&&(i.formatter=r(e),i.formatter.init&&i.formatter.init(i,this.options),this.options.interpolation.format=i.formatter.format.bind(i.formatter)),i.interpolator=new _e(this.options),i.utils={hasLoadedNamespace:this.hasLoadedNamespace.bind(this)},i.backendConnector=new Ce(r(this.modules.backend),i.resourceStore,i,this.options),i.backendConnector.on(`*`,(e,...t)=>{this.emit(e,...t)}),this.modules.languageDetector&&(i.languageDetector=r(this.modules.languageDetector),i.languageDetector.init&&i.languageDetector.init(i,this.options.detection,this.options)),this.modules.i18nFormat&&(i.i18nFormat=r(this.modules.i18nFormat),i.i18nFormat.init&&i.i18nFormat.init(this)),this.translator=new ue(this.services,this.options),this.translator.on(`*`,(e,...t)=>{this.emit(e,...t)}),this.modules.external.forEach(e=>{e.init&&e.init(this)})}if(this.format=this.options.interpolation.format,t||=Ee,this.options.fallbackLng&&!this.services.languageDetector&&!this.options.lng){let e=this.services.languageUtils.getFallbackCodes(this.options.fallbackLng);e.length>0&&e[0]!==`dev`&&(this.options.lng=e[0])}!this.services.languageDetector&&!this.options.lng&&this.logger.warn(`init: no languageDetector is used and no lng is defined`),[`getResource`,`hasResourceBundle`,`getResourceBundle`,`getDataByLanguage`].forEach(e=>{this[e]=(...t)=>this.store[e](...t)}),[`addResource`,`addResources`,`addResourceBundle`,`removeResourceBundle`].forEach(e=>{this[e]=(...t)=>(this.store[e](...t),this)});let i=S(),a=()=>{let e=(e,n)=>{this.isInitializing=!1,this.isInitialized&&!this.initializedStoreOnce&&this.logger.warn(`init: i18next is already initialized. You should call init just once!`),this.isInitialized=!0,this.options.isClone||this.logger.log(`initialized`,this.options),this.emit(`initialized`,this.options),i.resolve(n),t(e,n)};if(this.languages&&!this.isInitialized)return e(null,this.t.bind(this));this.changeLanguage(this.options.lng,e)};return this.options.resources||!this.options.initAsync?a():setTimeout(a,0),i}loadResources(e,t=Ee){let n=t,r=x(e)?e:this.language;if(typeof e==`function`&&(n=e),!this.options.resources||this.options.partialBundledLanguages){if(r?.toLowerCase()===`cimode`&&(!this.options.preload||this.options.preload.length===0))return n();let e=[],t=t=>{t&&t!==`cimode`&&this.services.languageUtils.toResolveHierarchy(t).forEach(t=>{t!==`cimode`&&e.indexOf(t)<0&&e.push(t)})};r?t(r):this.services.languageUtils.getFallbackCodes(this.options.fallbackLng).forEach(e=>t(e)),this.options.preload?.forEach?.(e=>t(e)),this.services.backendConnector.load(e,this.options.ns,e=>{!e&&!this.resolvedLanguage&&this.language&&this.setResolvedLanguage(this.language),n(e)})}else n(null)}reloadResources(e,t,n){let r=S();return typeof e==`function`&&(n=e,e=void 0),typeof t==`function`&&(n=t,t=void 0),e||=this.languages,t||=this.options.ns,n||=Ee,this.services.backendConnector.reload(e,t,e=>{r.resolve(),n(e)}),r}use(e){if(!e)throw Error(`You are passing an undefined module! Please check the object you are passing to i18next.use()`);if(!e.type)throw Error(`You are passing a wrong module! Please check the object you are passing to i18next.use()`);return e.type===`backend`&&(this.modules.backend=e),(e.type===`logger`||e.log&&e.warn&&e.error)&&(this.modules.logger=e),e.type===`languageDetector`&&(this.modules.languageDetector=e),e.type===`i18nFormat`&&(this.modules.i18nFormat=e),e.type===`postProcessor`&&ae.addPostProcessor(e),e.type===`formatter`&&(this.modules.formatter=e),e.type===`3rdParty`&&this.modules.external.push(e),this}setResolvedLanguage(e){if(!(!e||!this.languages)&&!([`cimode`,`dev`].indexOf(e)>-1)){for(let e=0;e<this.languages.length;e++){let t=this.languages[e];if(!([`cimode`,`dev`].indexOf(t)>-1)&&this.store.hasLanguageSomeTranslations(t)){this.resolvedLanguage=t;break}}!this.resolvedLanguage&&this.languages.indexOf(e)<0&&this.store.hasLanguageSomeTranslations(e)&&(this.resolvedLanguage=e,this.languages.unshift(e))}}changeLanguage(e,t){this.isLanguageChangingTo=e;let n=S();this.emit(`languageChanging`,e);let r=e=>{this.language=e,this.languages=this.services.languageUtils.toResolveHierarchy(e),this.resolvedLanguage=void 0,this.setResolvedLanguage(e)},i=(i,a)=>{a?this.isLanguageChangingTo===e&&(r(a),this.translator.changeLanguage(a),this.isLanguageChangingTo=void 0,this.emit(`languageChanged`,a),this.logger.log(`languageChanged`,a)):this.isLanguageChangingTo=void 0,n.resolve((...e)=>this.t(...e)),t&&t(i,(...e)=>this.t(...e))},a=t=>{!e&&!t&&this.services.languageDetector&&(t=[]);let n=x(t)?t:t&&t[0],a=this.store.hasLanguageSomeTranslations(n)?n:this.services.languageUtils.getBestMatchFromCodes(x(t)?[t]:t);a&&(this.language||r(a),this.translator.language||this.translator.changeLanguage(a),this.services.languageDetector?.cacheUserLanguage?.(a)),this.loadResources(a,e=>{i(e,a)})};return!e&&this.services.languageDetector&&!this.services.languageDetector.async?a(this.services.languageDetector.detect()):!e&&this.services.languageDetector&&this.services.languageDetector.async?this.services.languageDetector.detect.length===0?this.services.languageDetector.detect().then(a):this.services.languageDetector.detect(a):a(e),n}getFixedT(e,t,n){let r=(e,t,...i)=>{let a;a=typeof t==`object`?{...t}:this.options.overloadTranslationOptionHandler([e,t].concat(i)),a.lng=a.lng||r.lng,a.lngs=a.lngs||r.lngs,a.ns=a.ns||r.ns,a.keyPrefix!==``&&(a.keyPrefix=a.keyPrefix||n||r.keyPrefix);let o=this.options.keySeparator||`.`,s;return a.keyPrefix&&Array.isArray(e)?s=e.map(e=>(typeof e==`function`&&(e=H(e,{...this.options,...t})),`${a.keyPrefix}${o}${e}`)):(typeof e==`function`&&(e=H(e,{...this.options,...t})),s=a.keyPrefix?`${a.keyPrefix}${o}${e}`:e),this.t(s,a)};return x(e)?r.lng=e:r.lngs=e,r.ns=t,r.keyPrefix=n,r}t(...e){return this.translator?.translate(...e)}exists(...e){return this.translator?.exists(...e)}setDefaultNamespace(e){this.options.defaultNS=e}hasLoadedNamespace(e,t={}){if(!this.isInitialized)return this.logger.warn(`hasLoadedNamespace: i18next was not initialized`,this.languages),!1;if(!this.languages||!this.languages.length)return this.logger.warn(`hasLoadedNamespace: i18n.languages were undefined or empty`,this.languages),!1;let n=t.lng||this.resolvedLanguage||this.languages[0],r=this.options?this.options.fallbackLng:!1,i=this.languages[this.languages.length-1];if(n.toLowerCase()===`cimode`)return!0;let a=(e,t)=>{let n=this.services.backendConnector.state[`${e}|${t}`];return n===-1||n===0||n===2};if(t.precheck){let e=t.precheck(this,a);if(e!==void 0)return e}return!!(this.hasResourceBundle(n,e)||!this.services.backendConnector.backend||this.options.resources&&!this.options.partialBundledLanguages||a(n,e)&&(!r||a(i,e)))}loadNamespaces(e,t){let n=S();return this.options.ns?(x(e)&&(e=[e]),e.forEach(e=>{this.options.ns.indexOf(e)<0&&this.options.ns.push(e)}),this.loadResources(e=>{n.resolve(),t&&t(e)}),n):(t&&t(),Promise.resolve())}loadLanguages(e,t){let n=S();x(e)&&(e=[e]);let r=this.options.preload||[],i=e.filter(e=>r.indexOf(e)<0&&this.services.languageUtils.isSupportedCode(e));return i.length?(this.options.preload=r.concat(i),this.loadResources(e=>{n.resolve(),t&&t(e)}),n):(t&&t(),Promise.resolve())}dir(e){if(e||=this.resolvedLanguage||(this.languages?.length>0?this.languages[0]:this.language),!e)return`rtl`;try{let t=new Intl.Locale(e);if(t&&t.getTextInfo){let e=t.getTextInfo();if(e&&e.direction)return e.direction}}catch{}let t=`ar.shu.sqr.ssh.xaa.yhd.yud.aao.abh.abv.acm.acq.acw.acx.acy.adf.ads.aeb.aec.afb.ajp.apc.apd.arb.arq.ars.ary.arz.auz.avl.ayh.ayl.ayn.ayp.bbz.pga.he.iw.ps.pbt.pbu.pst.prp.prd.ug.ur.ydd.yds.yih.ji.yi.hbo.men.xmn.fa.jpr.peo.pes.prs.dv.sam.ckb`.split(`.`),n=this.services?.languageUtils||new de(we());return e.toLowerCase().indexOf(`-latn`)>1?`ltr`:t.indexOf(n.getLanguagePartFromCode(e))>-1||e.toLowerCase().indexOf(`-arab`)>1?`rtl`:`ltr`}static createInstance(t={},n){let r=new e(t,n);return r.createInstance=e.createInstance,r}cloneInstance(t={},n=Ee){let r=t.forkResourceStore;r&&delete t.forkResourceStore;let i={...this.options,...t,isClone:!0},a=new e(i);return(t.debug!==void 0||t.prefix!==void 0)&&(a.logger=a.logger.clone(t)),[`store`,`services`,`language`].forEach(e=>{a[e]=this[e]}),a.services={...this.services},a.services.utils={hasLoadedNamespace:a.hasLoadedNamespace.bind(a)},r&&(a.store=new ie(Object.keys(this.store.data).reduce((e,t)=>(e[t]={...this.store.data[t]},e[t]=Object.keys(e[t]).reduce((n,r)=>(n[r]={...e[t][r]},n),e[t]),e),{}),i),a.services.resourceStore=a.store),a.translator=new ue(a.services,i),a.translator.on(`*`,(e,...t)=>{a.emit(e,...t)}),a.init(i,n),a.translator.options=i,a.translator.backendConnector.services.utils={hasLoadedNamespace:a.hasLoadedNamespace.bind(a)},a}toJSON(){return{options:this.options,store:this.store,language:this.language,languages:this.languages,resolvedLanguage:this.resolvedLanguage}}}.createInstance();Oe.createInstance,Oe.dir,Oe.init,Oe.loadResources,Oe.reloadResources,Oe.use,Oe.changeLanguage,Oe.getFixedT,Oe.t,Oe.exists,Oe.setDefaultNamespace,Oe.hasLoadedNamespace,Oe.loadNamespaces,Oe.loadLanguages;var ke=(e,t,n,r)=>{let i=[n,{code:t,...r||{}}];if(e?.services?.logger?.forward)return e.services.logger.forward(i,`warn`,`react-i18next::`,!0);Ie(i[0])&&(i[0]=`react-i18next:: ${i[0]}`),e?.services?.logger?.warn?e.services.logger.warn(...i):console?.warn&&console.warn(...i)},Ae={},je=(e,t,n,r)=>{Ie(n)&&Ae[n]||(Ie(n)&&(Ae[n]=new Date),ke(e,t,n,r))},Me=(e,t)=>()=>{if(e.isInitialized)t();else{let n=()=>{setTimeout(()=>{e.off(`initialized`,n)},0),t()};e.on(`initialized`,n)}},Ne=(e,t,n)=>{e.loadNamespaces(t,Me(e,n))},Pe=(e,t,n,r)=>{if(Ie(n)&&(n=[n]),e.options.preload&&e.options.preload.indexOf(t)>-1)return Ne(e,n,r);n.forEach(t=>{e.options.ns.indexOf(t)<0&&e.options.ns.push(t)}),e.loadLanguages(t,Me(e,r))},Fe=(e,t,n={})=>!t.languages||!t.languages.length?(je(t,`NO_LANGUAGES`,`i18n.languages were undefined or empty`,{languages:t.languages}),!0):t.hasLoadedNamespace(e,{lng:n.lng,precheck:(t,r)=>{if(n.bindI18n&&n.bindI18n.indexOf(`languageChanging`)>-1&&t.services.backendConnector.backend&&t.isLanguageChangingTo&&!r(t.isLanguageChangingTo,e))return!1}}),Ie=e=>typeof e==`string`,Le=e=>typeof e==`object`&&!!e,Re=/&(?:amp|#38|lt|#60|gt|#62|apos|#39|quot|#34|nbsp|#160|copy|#169|reg|#174|hellip|#8230|#x2F|#47);/g,ze={"&amp;":`&`,"&#38;":`&`,"&lt;":`<`,"&#60;":`<`,"&gt;":`>`,"&#62;":`>`,"&apos;":`'`,"&#39;":`'`,"&quot;":`"`,"&#34;":`"`,"&nbsp;":` `,"&#160;":` `,"&copy;":`©`,"&#169;":`©`,"&reg;":`®`,"&#174;":`®`,"&hellip;":`…`,"&#8230;":`…`,"&#x2F;":`/`,"&#47;":`/`},Be=e=>ze[e],Ve={bindI18n:`languageChanged`,bindI18nStore:``,transEmptyNodeValue:``,transSupportBasicHtmlNodes:!0,transWrapTextNodes:``,transKeepBasicHtmlNodesFor:[`br`,`strong`,`i`,`p`],useSuspense:!0,unescape:e=>e.replace(Re,Be),transDefaultProps:void 0},He=(e={})=>{Ve={...Ve,...e}},Ue=()=>Ve,We,Ge=e=>{We=e},Ke=()=>We,qe={type:`3rdParty`,init(e){He(e.options.react),Ge(e)}},Je=(0,y.createContext)(),Ye=class{constructor(){this.usedNamespaces={}}addUsedNamespaces(e){e.forEach(e=>{this.usedNamespaces[e]||(this.usedNamespaces[e]=!0)})}getUsedNamespaces(){return Object.keys(this.usedNamespaces)}},Xe=o((e=>{var t=f();function n(e,t){return e===t&&(e!==0||1/e==1/t)||e!==e&&t!==t}var r=typeof Object.is==`function`?Object.is:n,i=t.useState,a=t.useEffect,o=t.useLayoutEffect,s=t.useDebugValue;function c(e,t){var n=t(),r=i({inst:{value:n,getSnapshot:t}}),c=r[0].inst,u=r[1];return o(function(){c.value=n,c.getSnapshot=t,l(c)&&u({inst:c})},[e,n,t]),a(function(){return l(c)&&u({inst:c}),e(function(){l(c)&&u({inst:c})})},[e]),s(n),n}function l(e){var t=e.getSnapshot;e=e.value;try{var n=t();return!r(e,n)}catch{return!0}}function u(e,t){return t()}var d=typeof window>`u`||window.document===void 0||window.document.createElement===void 0?u:c;e.useSyncExternalStore=t.useSyncExternalStore===void 0?d:t.useSyncExternalStore})),Ze=o(((e,t)=>{t.exports=Xe()})),Qe=Ze(),$e={t:(e,t)=>Ie(t)?t:Le(t)&&Ie(t.defaultValue)?t.defaultValue:Array.isArray(e)?e[e.length-1]:e,ready:!1},et=()=>()=>{},U=(e,t={})=>{let{i18n:n}=t,{i18n:r,defaultNS:i}=(0,y.useContext)(Je)||{},a=n||r||Ke();a&&!a.reportNamespaces&&(a.reportNamespaces=new Ye),a||je(a,`NO_I18NEXT_INSTANCE`,`useTranslation: You will need to pass in an i18next instance by using initReactI18next`);let o=(0,y.useMemo)(()=>({...Ue(),...a?.options?.react,...t}),[a,t]),{useSuspense:s,keyPrefix:c}=o,l=e||i||a?.options?.defaultNS,u=Ie(l)?[l]:l||[`translation`],d=(0,y.useMemo)(()=>u,u);a?.reportNamespaces?.addUsedNamespaces?.(d);let f=(0,y.useRef)(0),p=(0,y.useCallback)(e=>{if(!a)return et;let{bindI18n:t,bindI18nStore:n}=o,r=()=>{f.current+=1,e()};return t&&a.on(t,r),n&&a.store.on(n,r),()=>{t&&t.split(` `).forEach(e=>a.off(e,r)),n&&n.split(` `).forEach(e=>a.store.off(e,r))}},[a,o]),m=(0,y.useRef)(),h=(0,y.useCallback)(()=>{if(!a)return $e;let e=!!(a.isInitialized||a.initializedStoreOnce)&&d.every(e=>Fe(e,a,o)),n=t.lng||a.language,r=f.current,i=m.current;if(i&&i.ready===e&&i.lng===n&&i.keyPrefix===c&&i.revision===r)return i;let s={t:a.getFixedT(n,o.nsMode===`fallback`?d:d[0],c),ready:e,lng:n,keyPrefix:c,revision:r};return m.current=s,s},[a,d,c,o,t.lng]),[g,_]=(0,y.useState)(0),{t:v,ready:b}=(0,Qe.useSyncExternalStore)(p,h,h);(0,y.useEffect)(()=>{if(a&&!b&&!s){let e=()=>_(e=>e+1);t.lng?Pe(a,t.lng,d,e):Ne(a,d,e)}},[a,t.lng,d,b,s,g]);let x=a||{},S=(0,y.useRef)(null),C=(0,y.useRef)(),w=e=>{let t=Object.getOwnPropertyDescriptors(e);t.__original&&delete t.__original;let n=Object.create(Object.getPrototypeOf(e),t);if(!Object.prototype.hasOwnProperty.call(n,`__original`))try{Object.defineProperty(n,"__original",{value:e,writable:!1,enumerable:!1,configurable:!1})}catch{}return n},T=(0,y.useMemo)(()=>{let e=x,t=e?.language,n=e;e&&(S.current&&S.current.__original===e&&C.current===t?n=S.current:(n=w(e),S.current=n,C.current=t));let r=[v,n,b];return r.t=v,r.i18n=n,r.ready=b,r},[v,x,b,x.resolvedLanguage,x.language,x.languages]);if(a&&s&&!b)throw new Promise(e=>{let n=()=>e();t.lng?Pe(a,t.lng,d,n):Ne(a,d,n)});return T},{slice:tt,forEach:nt}=[];function rt(e){return nt.call(tt.call(arguments,1),t=>{if(t)for(let n in t)e[n]===void 0&&(e[n]=t[n])}),e}function it(e){return typeof e==`string`?[/<\s*script.*?>/i,/<\s*\/\s*script\s*>/i,/<\s*img.*?on\w+\s*=/i,/<\s*\w+\s*on\w+\s*=.*?>/i,/javascript\s*:/i,/vbscript\s*:/i,/expression\s*\(/i,/eval\s*\(/i,/alert\s*\(/i,/document\.cookie/i,/document\.write\s*\(/i,/window\.location/i,/innerHTML/i].some(t=>t.test(e)):!1}var at=/^[\u0009\u0020-\u007e\u0080-\u00ff]+$/,ot=function(e,t){let n=arguments.length>2&&arguments[2]!==void 0?arguments[2]:{path:`/`},r=`${e}=${encodeURIComponent(t)}`;if(n.maxAge>0){let e=n.maxAge-0;if(Number.isNaN(e))throw Error(`maxAge should be a Number`);r+=`; Max-Age=${Math.floor(e)}`}if(n.domain){if(!at.test(n.domain))throw TypeError(`option domain is invalid`);r+=`; Domain=${n.domain}`}if(n.path){if(!at.test(n.path))throw TypeError(`option path is invalid`);r+=`; Path=${n.path}`}if(n.expires){if(typeof n.expires.toUTCString!=`function`)throw TypeError(`option expires is invalid`);r+=`; Expires=${n.expires.toUTCString()}`}if(n.httpOnly&&(r+=`; HttpOnly`),n.secure&&(r+=`; Secure`),n.sameSite)switch(typeof n.sameSite==`string`?n.sameSite.toLowerCase():n.sameSite){case!0:r+=`; SameSite=Strict`;break;case`lax`:r+=`; SameSite=Lax`;break;case`strict`:r+=`; SameSite=Strict`;break;case`none`:r+=`; SameSite=None`;break;default:throw TypeError(`option sameSite is invalid`)}return n.partitioned&&(r+=`; Partitioned`),r},st={create(e,t,n,r){let i=arguments.length>4&&arguments[4]!==void 0?arguments[4]:{path:`/`,sameSite:`strict`};n&&(i.expires=new Date,i.expires.setTime(i.expires.getTime()+n*60*1e3)),r&&(i.domain=r),document.cookie=ot(e,t,i)},read(e){let t=`${e}=`,n=document.cookie.split(`;`);for(let e=0;e<n.length;e++){let r=n[e];for(;r.charAt(0)===` `;)r=r.substring(1,r.length);if(r.indexOf(t)===0)return r.substring(t.length,r.length)}return null},remove(e,t){this.create(e,``,-1,t)}},ct={name:`cookie`,lookup(e){let{lookupCookie:t}=e;if(t&&typeof document<`u`)return st.read(t)||void 0},cacheUserLanguage(e,t){let{lookupCookie:n,cookieMinutes:r,cookieDomain:i,cookieOptions:a}=t;n&&typeof document<`u`&&st.create(n,e,r,i,a)}},lt={name:`querystring`,lookup(e){let{lookupQuerystring:t}=e,n;if(typeof window<`u`){let{search:e}=window.location;!window.location.search&&window.location.hash?.indexOf(`?`)>-1&&(e=window.location.hash.substring(window.location.hash.indexOf(`?`)));let r=e.substring(1).split(`&`);for(let e=0;e<r.length;e++){let i=r[e].indexOf(`=`);i>0&&r[e].substring(0,i)===t&&(n=r[e].substring(i+1))}}return n}},ut={name:`hash`,lookup(e){let{lookupHash:t,lookupFromHashIndex:n}=e,r;if(typeof window<`u`){let{hash:e}=window.location;if(e&&e.length>2){let i=e.substring(1);if(t){let e=i.split(`&`);for(let n=0;n<e.length;n++){let i=e[n].indexOf(`=`);i>0&&e[n].substring(0,i)===t&&(r=e[n].substring(i+1))}}if(r)return r;if(!r&&n>-1){let t=e.match(/\/([a-zA-Z-]*)/g);return Array.isArray(t)?t[typeof n==`number`?n:0]?.replace(`/`,``):void 0}}}return r}},dt=null,ft=()=>{if(dt!==null)return dt;try{if(dt=typeof window<`u`&&window.localStorage!==null,!dt)return!1;let e=`i18next.translate.boo`;window.localStorage.setItem(e,`foo`),window.localStorage.removeItem(e)}catch{dt=!1}return dt},pt={name:`localStorage`,lookup(e){let{lookupLocalStorage:t}=e;if(t&&ft())return window.localStorage.getItem(t)||void 0},cacheUserLanguage(e,t){let{lookupLocalStorage:n}=t;n&&ft()&&window.localStorage.setItem(n,e)}},mt=null,ht=()=>{if(mt!==null)return mt;try{if(mt=typeof window<`u`&&window.sessionStorage!==null,!mt)return!1;let e=`i18next.translate.boo`;window.sessionStorage.setItem(e,`foo`),window.sessionStorage.removeItem(e)}catch{mt=!1}return mt},gt={name:`sessionStorage`,lookup(e){let{lookupSessionStorage:t}=e;if(t&&ht())return window.sessionStorage.getItem(t)||void 0},cacheUserLanguage(e,t){let{lookupSessionStorage:n}=t;n&&ht()&&window.sessionStorage.setItem(n,e)}},_t={name:`navigator`,lookup(e){let t=[];if(typeof navigator<`u`){let{languages:e,userLanguage:n,language:r}=navigator;if(e)for(let n=0;n<e.length;n++)t.push(e[n]);n&&t.push(n),r&&t.push(r)}return t.length>0?t:void 0}},vt={name:`htmlTag`,lookup(e){let{htmlTag:t}=e,n,r=t||(typeof document<`u`?document.documentElement:null);return r&&typeof r.getAttribute==`function`&&(n=r.getAttribute(`lang`)),n}},yt={name:`path`,lookup(e){let{lookupFromPathIndex:t}=e;if(typeof window>`u`)return;let n=window.location.pathname.match(/\/([a-zA-Z-]*)/g);if(Array.isArray(n))return n[typeof t==`number`?t:0]?.replace(`/`,``)}},bt={name:`subdomain`,lookup(e){let{lookupFromSubdomainIndex:t}=e,n=typeof t==`number`?t+1:1,r=typeof window<`u`&&window.location?.hostname?.match(/^(\w{2,5})\.(([a-z0-9-]{1,63}\.[a-z]{2,6})|localhost)/i);if(r)return r[n]}},xt=!1;try{document.cookie,xt=!0}catch{}var St=[`querystring`,`cookie`,`localStorage`,`sessionStorage`,`navigator`,`htmlTag`];xt||St.splice(1,1);var Ct=()=>({order:St,lookupQuerystring:`lng`,lookupCookie:`i18next`,lookupLocalStorage:`i18nextLng`,lookupSessionStorage:`i18nextLng`,caches:[`localStorage`],excludeCacheFor:[`cimode`],convertDetectedLanguage:e=>e}),wt=class{constructor(e){let t=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{};this.type=`languageDetector`,this.detectors={},this.init(e,t)}init(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:{languageUtils:{}},t=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{},n=arguments.length>2&&arguments[2]!==void 0?arguments[2]:{};this.services=e,this.options=rt(t,this.options||{},Ct()),typeof this.options.convertDetectedLanguage==`string`&&this.options.convertDetectedLanguage.indexOf(`15897`)>-1&&(this.options.convertDetectedLanguage=e=>e.replace(`-`,`_`)),this.options.lookupFromUrlIndex&&(this.options.lookupFromPathIndex=this.options.lookupFromUrlIndex),this.i18nOptions=n,this.addDetector(ct),this.addDetector(lt),this.addDetector(pt),this.addDetector(gt),this.addDetector(_t),this.addDetector(vt),this.addDetector(yt),this.addDetector(bt),this.addDetector(ut)}addDetector(e){return this.detectors[e.name]=e,this}detect(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:this.options.order,t=[];return e.forEach(e=>{if(this.detectors[e]){let n=this.detectors[e].lookup(this.options);n&&typeof n==`string`&&(n=[n]),n&&(t=t.concat(n))}}),t=t.filter(e=>e!=null&&!it(e)).map(e=>this.options.convertDetectedLanguage(e)),this.services&&this.services.languageUtils&&this.services.languageUtils.getBestMatchFromCodes?t:t.length>0?t[0]:null}cacheUserLanguage(e){let t=arguments.length>1&&arguments[1]!==void 0?arguments[1]:this.options.caches;t&&(this.options.excludeCacheFor&&this.options.excludeCacheFor.indexOf(e)>-1||t.forEach(t=>{this.detectors[t]&&this.detectors[t].cacheUserLanguage(e,this.options)}))}};wt.type=`languageDetector`;var Tt={en:{translation:{nav:{printers:`Printers`,archives:`Archives`,queue:`Print Queue`,stats:`Statistics`,profiles:`Profiles`,maintenance:`Maintenance`,projects:`Projects`,finance:`Finance`,inventory:`Filament`,files:`File Manager`,makerworld:`MakerWorld`,notifications:`Notifications`,settings:`Settings`,system:`System`,collapseSidebar:`Collapse sidebar`,expandSidebar:`Expand sidebar`,update:`Update`,updateAvailable:`Update available: v{{version}}`,updateAvailableBanner:`Version {{version}} is available!`,viewUpdate:`View update`,viewOnGithub:`View on GitHub`,keyboardShortcuts:`Keyboard shortcuts (?)`,switchToLight:`Switch to light mode`,switchToDark:`Switch to dark mode`,switchToSystem:`Switch to system mode`,smartSwitches:`Smart Switches`,logout:`Logout`,installApp:`Install app`,installAppSuccess:`Bambuddy was installed`},common:{plusNMore:`+{{count}} more`,save:`Save`,saving:`Saving...`,cancel:`Cancel`,delete:`Delete`,edit:`Edit`,add:`Add`,close:`Close`,confirm:`Confirm`,loading:`Loading...`,error:`Error`,errorLoading:`Error loading data`,retry:`Retry`,success:`Success`,warning:`Warning`,enabled:`Enabled`,disabled:`Disabled`,yes:`Yes`,no:`No`,on:`On`,off:`Off`,all:`All`,none:`None`,search:`Search`,filter:`Filter`,sort:`Sort`,refresh:`Refresh`,download:`Download`,upload:`Upload`,uploading:`Uploading...`,uploadFailed:`Upload failed`,actions:`Actions`,status:`Status`,name:`Name`,user:`User`,description:`Description`,date:`Date`,time:`Time`,hours:`hours`,minutes:`minutes`,seconds:`seconds`,days:`days`,enable:`Enable`,disable:`Disable`,permissions:`Permissions`,noPrinters:`No printers configured`,noData:`No data available`,linkNotFound:`Link not found`,required:`Required`,optional:`Optional`,dismiss:`Dismiss`,apply:`Apply`,reset:`Reset`,export:`Export`,import:`Import`,clear:`Clear`,selectAll:`Select All`,deselectAll:`Deselect All`,noChange:`— No change —`,unchanged:`Unchanged`,unassigned:`Unassigned`,unknown:`Unknown`,unknownError:`Unknown error`,today:`Today`,tomorrow:`Tomorrow`,asap:`ASAP`,overdue:`Overdue`,now:`Now`,collapse:`Collapse`,expand:`Expand`,previous:`Previous`,next:`Next`,viewArchive:`View archive`,viewInFileManager:`View in File Manager`,addedBy:`Added by {{username}}`,prints:`prints`,more:`+{{count}} more`,ascending:`Ascending`,descending:`Descending`,back:`Back`,copy:`Copy`,copied:`Copied!`,printer:`Printer`,remove:`Remove`,type:`Type`,print:`Print`,rename:`Rename`,move:`Move`,create:`Create`,duplicate:`Duplicate`,left:`Left`,right:`Right`,run:`Run`,running:`Running...`},finance:{allTypes:`All types`,allCostCenters:`All cost centers`,title:`Finance`,subtitle:`Wallet, personal transactions, and cost centers`,noAccess:`You do not have permission to view finance data.`,personalView:`Personal view`,adminView:`Admin view`,createCostCenter:`Create cost center`,adjustWallet:`Adjust wallet`,addManualPrint:`Add manual print`,manageMembers:`Manage cost center members`,currentBalance:`Personal balance`,transactions:`Transactions`,personalTransactions:`Personal transactions`,costCenters:`Cost centers`,availableForPrinting:`Available for print assignment`,costCenterName:`Name`,budgetType:`Budget type`,monthlyBudget:`Monthly budget`,totalBudget:`Total budget`,noBudget:`No budget`,create:`Create`,selectUser:`Select user`,transactionType:`Type`,amount:`Amount`,noCostCenter:`No cost center`,descriptionOptional:`Description (optional)`,applyAdjustment:`Apply adjustment`,memberCanPrint:`Member can print`,addMember:`Add member`,canPrint:`Can print`,noMembers:`No members assigned.`,editCostCenter:`Edit cost center`,myCostCenters:`My cost centers`,costCentersHint:`Review budget limits and keep costs under control`,noCostCenters:`No cost centers found.`,owner:`Owner`,balance:`Account balance`,unlimited:`Unlimited`,budgetPolicyHint:`Account balances track costs. Printing is limited only by the selected cost center budget; without a budget, printing is unlimited.`,budget:`Budget`,shared:`Shared`,cannotEditPrivateCostCenter:`Private cost centers cannot be edited here`,recentTransactions:`Recent transactions`,transactionsHint:`Filter by type and cost center`,first:`First`,prev:`Previous`,next:`Next`,last:`Last`,pageNumberOf:`Page {{page}} of {{total}}`,noTransactions:`No transactions available.`,noTransactionsForFilter:`No transactions match the selected filters.`,costCenter:`Cost center`,balanceAfter:`Balance after`,userWithId:`User #{{id}}`,partial:`Partial`,editTransaction:`Edit Transaction`,selectCostCenter:`Select cost center...`,costCenterRequired:`Please select a cost center`,amountExample:`e.g., 4.00`,manualAdjustmentExample:`e.g., Manual adjustment`,userRequired:`Please select a user`,amountInvalid:`Amount must be a valid number`,createdCostCenter:`Cost center created`,createCostCenterFailed:`Failed to create cost center`,transactionDeleted:`Transaction deleted`,deleteTransactionFailed:`Failed to delete transaction`,transactionEdited:`Transaction updated and ledger recalculated`,editTransactionFailed:`Failed to edit transaction`,manualPrintCreated:`Manual print charge added and ledger recalculated`,manualPrintFailed:`Failed to create manual print`,memberSaved:`Member saved`,memberSaveFailed:`Failed to save member`,memberRemoved:`Member removed`,memberRemoveFailed:`Failed to remove member`,costCenterNameRequired:`Cost center name is required`,costCenterUpdated:`Cost center updated`,costCenterUpdateFailed:`Failed to update cost center`,confirmDeleteCostCenter:`Delete cost center "{{name}}"?`,costCenterDeleted:`Cost center deleted`,costCenterDeleteFailed:`Failed to delete cost center`,deleteTransactionConfirm:`Delete this transaction? Balances will be recalculated automatically.`,deposit:`Deposit`,withdraw:`Withdraw`,printCharge:`Print charge`,deleteTransaction:`Delete transaction`},printers:{title:`Printers`,addPrinter:`Add Printer`,addPreflight:{checking:`Checking connection...`,warning:`Some connection checks failed. This printer may show as offline. Review the checks below, fix what you can, or save anyway.`,back:`Back`,saveAnyway:`Save anyway`},editPrinter:`Edit Printer`,deletePrinter:`Delete Printer`,printerName:`Printer Name`,serialNumber:`Serial Number`,ipAddress:`IP Address / Hostname`,accessCode:`Access Code`,model:`Model`,nozzleCount:`Nozzle Count`,autoArchive:`Auto Archive`,status:{available:`Available`,idle:`Idle`,printing:`Printing`,paused:`Paused`,offline:`Offline`,problem:`Problem`,error:`Error`,finished:`Finished`,unknown:`Unknown`},temperatures:{nozzle:`Nozzle`,bed:`Bed`,chamber:`Chamber`},heaterHistory:{title:`Heater History`,openLabel:`View heater history`,nozzle:`Nozzle`,nozzle2:`Nozzle 2`,bed:`Bed`,chamber:`Chamber`,error:`Failed to load history`,empty:`No data recorded yet`},progress:`{{percent}}% complete`,timeRemaining:`{{time}} remaining`,deleteConfirm:`Are you sure you want to delete "{{name}}"?`,maintenanceOk:`Maintenance OK`,maintenanceWarning:`{{count}} warning`,maintenanceWarning_plural:`{{count}} warnings`,maintenanceDue:`{{count}} due`,maintenanceDue_plural:`{{count}} due`,sort:{name:`Name`,status:`Status`,model:`Model`,location:`Location`,eta:`ETA`,ascending:`Sort ascending`,descending:`Sort descending`},cardSize:{small:`Small cards`,medium:`Medium cards`,large:`Large cards`,extraLarge:`Extra large cards`},pageView:{openCamWallPage:`Open cam wall as page`,cards:`Cards`,camWall:`Cam wall`},camWall:{page:{tokenRejected:`This Cam Wall link is no longer valid. The token may have expired or been revoked.`,loadFailed:`Could not load the printers.`},noPrinters:`No printers to show`,noSignal:`No signal`,live:`Live`,snap:`Snap`,off:`Off`,summary:`{{live}} live, {{snap}} snapshots, {{total}} total`,layer:`Layer {{cur}}/{{total}}`,timeLeft:`{{time}} left`,statusMode:{off:`Off`,compact:`Compact`,full:`Full`},settings:{title:`Cam wall settings`,maxLive:`Max live streams`,maxLiveHint:`How many tiles stream live at once. Others refresh as snapshots.`,snapshotInterval:`Snapshot interval (seconds)`,snapshotIntervalHint:`How often non-live tiles fetch a fresh snapshot.`,statusOverlay:`Status overlay`,statusOverlayHint:`Compact: state badge only. Full: + progress, layer, time left.`}},hideOffline:`Hide offline`,nextAvailable:`Next available`,powerOn:`Power On`,offlinePrintersWithPlugs:`Offline printers with smart plugs`,noPrintersConfigured:`No printers configured yet`,search:`Search printers...`,noSearchResults:`No printers match your search or filters`,filter:{allStatuses:`All statuses`,allLocations:`All locations`},toolbar:{filters:`Filters`,view:`View`,actions:`Actions`},readyToPrint:`Ready to print`,external:`External`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Delete print archives`,noLabel:`No label`,printPreview:`Print preview`,width:`Width`,height:`Height`,noObjectsFound:`No objects found`,objectsLoadedOnPrintStart:`Objects are loaded when a print starts`,willBeSkipped:`Will be skipped`,name:`Name`,serialCannotBeChanged:`Serial number cannot be changed`,locationHelp:`Used to group printers and filter queue jobs`,wifiSignal:{veryWeak:`Very weak`,weak:`Weak`,fair:`Fair`,good:`Good`,excellent:`Excellent`},maintenanceUpToDate:`All maintenance up to date - Click to view`,maintenance:{title:`In Maintenance`,subtitle:`This printer is paused — not connected, not eligible for the queue, not sending notifications.`,pillLabel:`Maintenance`,exitButton:`Exit maintenance`,menuEnter:`Enter maintenance mode`,menuExit:`Exit maintenance mode`,toastEntered:`{{name}} is now in maintenance mode`,toastExited:`{{name}} is back online`,confirmMidPrintTitle:`Enter maintenance mode mid-print?`,confirmMidPrintMessage:`{{name}} is currently printing. Entering maintenance mode will disconnect MQTT and stop progress tracking and completion notifications for this job. Continue?`,editFieldLabel:`Maintenance mode`,editFieldHelp:`When on, this printer is paused from MQTT, queue dispatch and notifications — useful for repair, parallel Bambuddy installs, or temporary suspension.`},chamberLightOn:`Turn on chamber light`,chamberLightOff:`Turn off chamber light`,files:`Files`,browseFiles:`Browse printer files`,autoOffAfterPrint:`Auto power-off after print`,autoOffExecuted:`Auto-off was executed - turn printer on to reset`,hmsErrors:`HMS Errors`,viewHmsErrors:`View {{count}} HMS error(s)`,resume:`Resume`,pause:`Pause`,stop:`Stop`,camera:`Camera`,skipObject:`Skip Object`,reconnect:`Reconnect`,forceRefresh:`Force Refresh`,forceRefreshSuccess:`Refresh requested`,mqttDebug:`MQTT Debug`,printerInformation:`Printer Information`,copyToClipboard:`Copy`,copied:`Copied!`,state:`State`,wifiSignalLabel:`WiFi Signal`,developerMode:`Developer Mode`,enabled:`Enabled`,disabled:`Disabled`,addedOn:`Added`,sdCard:`SD Card`,inserted:`Inserted`,notInserted:`Not inserted`,totalPrintHours:`Print Hours`,activeNozzle:`Active: {{nozzle}} nozzle`,amsSwitchInletTooltip:`Filament Track Switch IN-{{inlet}} ({{side}}) — feeds both nozzles`,nozzleRack:`Nozzle Rack`,nozzleDocked:`Docked`,nozzleMounted:`Mounted`,nozzleActive:`Active`,nozzleIdle:`Idle`,nozzleDiameter:`Diameter`,nozzleType:`Type`,nozzleStatus:`Status`,nozzleFilament:`Filament`,nozzleWear:`Wear`,nozzleMaxTemp:`Max Temp`,nozzleSerial:`Serial`,nozzleHardenedSteel:`Hardened Steel`,nozzleStainlessSteel:`Stainless Steel`,nozzleTungstenCarbide:`Tungsten Carbide`,nozzleFlow:`Flow`,nozzleHighFlow:`High Flow`,nozzleStandardFlow:`Standard`,firmwareUpdate:`Firmware Update`,firmwareInstructions:`On the printer's touchscreen, go to`,firmwareNav:`Navigate to`,settings:`Settings`,firmware:`Firmware`,discoverPrinters:`Discover Printers`,searching:`Searching...`,manualEntry:`Manual Entry`,addFromCloud:`Add from Cloud`,toast:{printerDeleted:`Printer deleted`,missingSpoolAssignment:`Print started on {{printer}}. Missing spool assignment for: {{slots}}`,killSwitchTriggered:`The billing kill switch stopped an unauthorized print on {{printer}}: {{filename}}`,billingChargeFailed:`Billing failed for {{filename}} on {{printer}}. The budget reservation was retained; check the server logs.`,assignmentVerified:`Filament loaded on slot {{slot}} ({{printer}})`,assignmentVerifiedNoKprofile:`Slot {{slot}} on {{printer}} loaded, but the flow calibration (K-profile) was not applied`,assignmentNotConfirmed:`Could not confirm the assignment for slot {{slot}} on {{printer}} — check the AMS slot`,printerAdded:`Printer added`,printerUpdated:`Printer updated`,failedToDelete:`Failed to delete printer`,failedToAdd:`Failed to add printer`,connectionFailedNotAdded:`Could not connect to the printer. Verify the IP, serial number, and access code, and confirm LAN-only mode is on. The printer was not added.`,failedToUpdate:`Failed to update printer`,commandSent:`Command sent`,failedToSendCommand:`Failed to send command`,turnedOn:`{{name}} turned on`,failedToPowerOn:`Failed to power on {{name}}`,scriptTriggered:`Script triggered`,printStopped:`Print stopped`,printPaused:`Print paused`,printResumed:`Print resumed`,referenceDeleted:`Reference deleted`,detectionAreaSaved:`Detection area saved`,failedToRunScript:`Failed to run script`,failedToStopPrint:`Failed to stop print`,failedToPausePrint:`Failed to pause print`,failedToResumePrint:`Failed to resume print`,failedToControlChamberLight:`Failed to control chamber light`,failedToSetSpeed:`Failed to set print speed`,failedToUpdateSetting:`Failed to update setting`,failedToSkipObjects:`Failed to skip objects`,failedToRereadRfid:`Failed to re-read RFID`,failedToCheckPlate:`Failed to check plate`,failedToUpdateLabel:`Failed to update label`,failedToDeleteReference:`Failed to delete reference`,failedToSaveDetectionArea:`Failed to save detection area`,plateCheckEnabled:`Plate check enabled`,plateCheckDisabled:`Plate check disabled`,calibrationSaved:`Calibration saved!`,calibrationFailed:`Calibration failed`,rfidRereadInitiated:`RFID re-read initiated`,loadInitiated:`Loading filament…`,unloadInitiated:`Unloading filament…`,failedToLoad:`Failed to load filament`,failedToUnload:`Failed to unload filament`},connection:{connected:`Connected`,offline:`Offline`},plateStatus:{markCleared:`Mark plate as cleared`,cleared:`Plate Clear`,notCleared:`Plate not Clear`,inUse:`Plate in Use`},queue:{inQueue:`{{count}} print in queue`,inQueue_plural:`{{count}} prints in queue`},controls:`Controls`,rfid:{reread:`Re-read RFID`},ams:{load:`Load`,unload:`Unload`,feedTitle:`Load {{slot}} to which nozzle?`,feedPrompt:`The Filament Track Switch can route this slot to either hotend. Choose which one to feed.`,feedLeft:`Left nozzle`,feedRight:`Right nozzle`,feedAlreadyLoaded:`Already loaded`,switchNotReady:`The Filament Track Switch is not set up yet. Assign every AMS to an inlet on the printer, then try again.`},bedJog:{limitWarning:`Travel limits are not enforced during manual moves — a Bambu firmware bug ignores software endstops for remote commands. Move carefully to avoid a collision.`,title:`Jog Controls`,bed:`Bed`,step:`Step (mm)`,up:`Move plate up`,down:`Move plate down`,toolheadUp:`Move toolhead up`,toolheadDown:`Move toolhead down`,disabledWhilePrinting:`Disabled while printing`,notHomedTitle:`Printer is not homed`,notHomedMessage:`The printer has not been homed since the last print. Run auto-home first for safe positioning (parks the toolhead, then homes X, Y, and Z), or move anyway — soft endstops will be bypassed.`,homeZ:`Auto Home`,moveAnyway:`Move anyway`,homingStarted:`Auto-homing printer…`},permission:{noAdd:`You do not have permission to add printers`,noEdit:`You do not have permission to edit printers`,noDelete:`You do not have permission to delete printers`,noControl:`You do not have permission to control printers`,noFiles:`You do not have permission to access printer files`,noAmsRfid:`You do not have permission to re-read AMS RFID`,noSmartPlugControl:`You do not have permission to control smart plugs`,noCamera:`You do not have permission to view cameras`},modal:{addTitle:`Add Printer`,editTitle:`Edit Printer`,myPrinter:`My Printer`,selectModel:`Select model...`,locationGroup:`Location / Group (optional)`,locationPlaceholder:`e.g., Workshop, Office, Basement`,autoArchiveLabel:`Auto-archive completed prints`,fromPrinterSettings:`From printer settings`,modelOptional:`Model (optional)`,saveChanges:`Save Changes`},skipObjects:{tooltip:`Skip objects`,onlyWhilePrinting:`Skip objects (only while printing)`,requiresMultiple:`Skip objects (requires 2+ objects)`,title:`Skip Objects`,matchIdsInfo:`Match IDs with your printer display`,printerShowsIds:`The printer screen shows object IDs on the build plate`,skipSelected:`Skip Selected`,skipping:`Skipping...`,noObjectsSelected:`No objects selected`,selectObjectsToSkip:`Select objects you want to skip from the current print`,skipped:`skipped`,objectsSkipped:`Objects skipped`,activeCount:`{{count}} active`,waitForLayer:`Wait for layer 2+ to skip objects (currently layer {{layer}})`,skip:`Skip`,confirmTitle:`Skip Object?`,confirmMessage:`Are you sure you want to skip "{{name}}"? This cannot be undone.`,confirmAllMessage:`All remaining objects are selected. This will stop the print job. Continue?`,confirmMultipleMessage:`Skip {{count}} selected objects? This cannot be undone.`},confirm:{deleteTitle:`Delete Printer`,deleteMessage:`Are you sure you want to delete "{{name}}"? This will remove all connection settings.`,deleteArchivesNote:`All print history for this printer will be permanently deleted.`,keepArchivesNote:`Print history will be kept but no longer associated with this printer.`,stopTitle:`Stop Print`,stopMessage:`Are you sure you want to stop the current print on "{{name}}"? This will cancel the print job.`,stopButton:`Stop Print`,pauseTitle:`Pause Print`,pauseMessage:`Are you sure you want to pause the current print on "{{name}}"?`,pauseButton:`Pause Print`,resumeTitle:`Resume Print`,resumeMessage:`Are you sure you want to resume the print on "{{name}}"?`,resumeButton:`Resume Print`,powerOnTitle:`Power On Printer`,powerOnMessage:`Are you sure you want to turn ON the power for "{{name}}"?`,powerOnButton:`Power On`,powerOffTitle:`Power Off Printer`,powerOffMessage:`Are you sure you want to turn OFF the power for "{{name}}"?`,powerOffWarning:`WARNING: "{{name}}" is currently printing! Are you sure you want to turn OFF the power? This will interrupt the print and may damage the printer.`,powerOffButton:`Power Off`,haToggleTitle:`Toggle "{{name}}"`,haToggleMessage:`Toggle the Home Assistant entity {{entity}}? This may turn power off if it is currently on.`,haToggleWarning:`WARNING: "{{name}}" is currently printing! Toggling {{entity}} may cut power and interrupt the print. Continue?`,haToggleButton:`Toggle`},bulk:{select:`Select`,selectAll:`Select All`,selectByLocation:`Select by Location`,selected:`{{count}} selected`,actions:{stop:`Stop`,pause:`Pause`,resume:`Resume`,clearPlate:`Clear Bed`,clearHMS:`Clear Notifications`},confirm:{stopTitle:`Stop {{count}} Prints`,stopMessage:`This will cancel active prints on {{count}} printer(s). This action cannot be undone.`,stopButton:`Stop All`,pauseTitle:`Pause {{count}} Prints`,pauseMessage:`This will pause active prints on {{count}} printer(s).`,pauseButton:`Pause All`,clearPlateTitle:`Clear {{count}} Print Beds`,clearPlateMessage:`This will clear the print bed on {{count}} printer(s) and may trigger queued jobs.`,clearPlateButton:`Clear All`},success:`{{action}} completed on {{count}} printer(s)`,partial:`{{succeeded}} succeeded, {{failed}} failed`,noneApplicable:`No selected printers are in the right state for this action`,selectByState:`Select by State`},discovery:{title:`Discover Printers`,searching:`Searching...`,scanning:`Scanning...`,scanProgress:`Scanning... {{scanned}}/{{total}}`,foundPrinters:`Found {{count}} printer(s)`,noPrintersFound:`No printers found`,noPrintersFoundSubnet:`No printers found in the specified subnet.`,noPrintersFoundNetwork:`No printers found on the network.`,allConfigured:`All discovered printers are already configured.`,alreadyAdded:`Already added`,select:`Select`,manualEntry:`Manual Entry`,addFromCloud:`Add from Cloud`,subnetToScan:`Subnet to scan`,dockerNote:`Docker detected. Enter your printer's subnet in CIDR notation. Requires network_mode: host in docker-compose.yml.`,scanSubnet:`Scan Subnet for Printers`,discoverNetwork:`Discover Printers on Network`,scanningSubnet:`Scanning subnet for Bambu printers...`,scanningNetwork:`Scanning network...`,serialRequired:`Serial required`,unknown:`Unknown`,failedToStart:`Failed to start discovery`,customSubnetOption:`Custom subnet...`,customSubnetLabel:`Custom subnet (CIDR)`,customSubnetNote:`Use a custom subnet if your printer is on a different network than this server. The FTP (990) and MQTT (8883) ports must be reachable across the routing boundary.`},drying:{start:`Start Drying`,stop:`Stop Drying`,temperature:`Temperature`,duration:`Duration`,hours:`hours`,timeRemaining:`{{time}} left`,active:`Drying`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`Drying not supported`,powerRequired:`Connect AMS power adapter to enable drying`,cannotDryNow:`AMS can't start drying right now`,startingDrying:`Starting drying...`,toastCommandSent:`Drying command sent`,toastStopped:`Drying stopped`,toastNotStarted:`The printer accepted the command but the AMS never started drying. Check that the AMS power adapter is connected and that the printer is idle.`,screenOnly:`AMS drying on this printer can only be controlled from the printer's own screen (Bambu limitation)`,stoppingDrying:`Stopping drying...`,rotateTray:`Rotate spool during drying`,rotateUnavailableReason:`Unavailable — a slot in this AMS is loaded to the toolhead. The spool is locked by the feed tube and cannot rotate. Retract the filament first.`,startMode:`Start time`,modeNow:`Now`,modeDelay:`After delay`,modeAtTime:`At time`,schedule:`Schedule`,scheduledFor:`Drying scheduled for {{time}}`,scheduledAsap:`Drying scheduled (waiting for printer)`,cancelScheduled:`Cancel scheduled drying`,scheduleFailed:`Failed to schedule drying`,retractFilament:`Retract the filament at the AMS outlet to start drying`,waitingAmsNotFound:`Waiting for the AMS to be detected`,waitingOffline:`Waiting for the printer to come online`,waitingPrinterBusy:`Waiting for the printer to be free`,waitingAlreadyDrying:`Waiting for the current drying cycle to finish`,waitingInterrupted:`Interrupted, will restart when the printer is free`,scheduleFailedReason:`Scheduled drying failed: {{reason}}`,scheduleFailedUnknown:`Unknown error`,dismissFailed:`Dismiss`},amsBackup:{titleOn:`AMS Filament Backup is ON. Click to disable.`,titleOff:`AMS Filament Backup is OFF. Click to enable.`,titleUnknown:`AMS Filament Backup status unavailable on this printer.`,toastEnabled:`AMS Filament Backup enabled`,toastDisabled:`AMS Filament Backup disabled`,modalTitle:`AMS Filament Backup`,modalHelp:`When the active slot runs out, the printer cycles through any matching same-preset, same-colour slots in this order.`,modalNoSlots:`No filament loaded.`,modalNoPairs:`No backup pairs — no two slots share the same filament profile and colour.`,extruderRightShort:`R`,extruderLeftShort:`L`,stateOn:`Enabled`,stateOff:`Disabled`,stateUnknown:`Unsupported on this printer`},activeJobSlot:{title:`This slot is filament {{n}} in the active print`,ariaLabel:`Active print slot {{n}}`},expectedSlot:{title:`The printer is waiting for filament in this slot`,ariaLabel:`Expected filament slot {{n}}`,label:`{{ams}} · Slot {{slot}}`,external:`External spool`},filaments:`Filaments`,externalSpool:{hide:`Hide external spool`,show:`Show external spool`},openCameraOverlay:`Open camera overlay`,openCameraWindow:`Open camera in new window`,firmwareUpdateAvailable:`Firmware update available: {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — Up to date`,firmwareUpdateButton:`Update`,plateDetection:{noPermission:`You do not have permission to update printers`,enabledClick:`Plate check enabled - Click to disable`,disabledClick:`Plate check disabled - Click to enable`,manageCalibration:`Manage plate detection calibration`,calibrationRequired:`Calibration Required`,calibrationInstructions:`Please ensure the build plate is <strong>completely empty</strong>, then click Calibrate.`,calibrationDescription:`Calibration captures a reference image of the empty plate. Future checks will compare against this reference to detect objects.`,calibrationTip:`<strong>Tip:</strong> You can store up to 5 calibrations for different plates. The system automatically uses the best match when checking.`,plateEmpty:`Plate appears empty`,objectsDetected:`Objects detected on plate`,confidence:`Confidence`,difference:`Difference`,analysisPreview:`Analysis preview:`,analysisLegend:`Green box = detection area, Red overlay = differences from calibration`,savedReferences:`Saved References ({{count}}/{{max}})`,deleteReference:`Delete reference`,labelPlaceholder:`Label...`,clickToEdit:`{{label}} - Click to edit`,clickToAddLabel:`Click to add label`},speed:{title:`Print Speed`,silent:`Silent (50%)`,standard:`Standard (100%)`,sport:`Sport (124%)`,ludicrous:`Ludicrous (166%)`},airduct:{title:`Airduct Mode`,cooling:`Cooling`,heating:`Heating`},noSdCard:`No SD`,door:{open:`Open`,closed:`Closed`},fans:{partCooling:`Part Cooling Fan`,auxiliary:`Auxiliary Fan`,leftAuxiliary:`Left Auxiliary Fan`,exhaust:`Exhaust`,chamber:`Chamber Fan`},clickToViewHmsErrors:`Click to view HMS errors`,aiDetection:{safe:`Safe`,warning:`Warning`,failure:`Failure`,idle:`Idle`,error:`Not checking`,unknown:`Starting`,tooltipError:`AI Failure Detection is not checking this print: {{reason}} - click for details`,tooltipUnknown:`AI Failure Detection: waiting for the first result - click for details`,errorHint:`This print is not being checked. Detection resumes automatically once the problem below is fixed.`,tooltip:`AI Failure Detection: {{status}} (score {{score}}) - click for details`,tooltipIdle:`AI Failure Detection enabled - monitoring starts with the next print - click for details`,modalTitle:`AI Failure Detection - {{name}}`,currentStatus:`Status`,score:`Score`,framesAnalyzed:`Frames analyzed`,idleHint:`No print is being monitored right now. Monitoring starts automatically with the next print.`,lastError:`Last error`,openSettings:`Open settings`},estimatedCompletion:`Estimated completion time`,plateNumber:`Plate {{number}}`,slotOptions:`Slot options`,amsPopup:{friendlyName:`AMS Name`,friendlyNamePlaceholder:`e.g. AMS Friendly Name`,serialNumber:`Serial Number`,firmwareVersion:`Firmware`,save:`Save`,clear:`Clear`,noEditPermission:`You do not have permission to rename AMS units`},firmwareModal:{title:`Firmware Update`,titleUpToDate:`Firmware Info`,currentVersion:`Current:`,latestVersion:`Latest:`,releaseNotes:`Release Notes`,checkingPrereqs:`Checking prerequisites...`,sdCardReady:`SD card ready. Click below to upload firmware.`,uploadedSuccess:`Firmware uploaded to SD card!`,applyInstructions:`To apply the update on your printer:`,step1:`On the printer's touchscreen, go to <strong>Settings</strong>`,step2:`Navigate to <strong>Firmware</strong>`,step3:`Select <strong>Update from SD card</strong>`,step4:`The update will take 10-20 minutes`,done:`Done`,starting:`Starting...`,uploadFirmware:`Upload Firmware`,uploadFailed:`Failed to start upload: {{error}}`,uploadedToast:`Firmware uploaded! Trigger update from printer screen.`,availableVersions:`Available versions`,usable:`Usable`,unavailable:`Unavailable`,installed:`Installed`,newerBadge:`newer`,olderBadge:`older`,currentBadge:`current`},accessCodePlaceholder:`Leave empty to keep current`,roi:{title:`Detection Area (ROI)`,xStart:`X Start`,yStart:`Y Start`,width:`Width`,height:`Height`,instruction:`Adjust the detection area to focus on the build plate. The green box in the preview shows the current area.`},developerModeWarning:`Developer LAN mode is not enabled on: {{names}}. Some features may not work.`,howToEnable:`How to enable`,incompatibleFile:`This file was sliced for {{slicedFor}}, but this printer is a {{printerModel}}`,dropNotPrintable:`Only .gcode and .gcode.3mf files can be printed`,dropToPrint:`Drop to print`,dropToQueue:`Drop to queue`},archives:{media:{title:`Print videos`,download:`Download print videos`,searching:`Checking the printer for videos…`,searchFailed:`Could not check the printer for videos.`,none:`No timelapse or IP camera chunks were found for this print.`,attachedTimelapse:`Attached timelapse`,printerFiles:`Files still on the printer`,downloadSelected:`Download selected`,printerMissing:`Printer is no longer configured`,timelapseUnavailable:`The timelapse directory could not be read`,ipcamUnavailable:`The IP camera directory could not be read`},title:`Print Archives`,no3mfBanner:{title:`Some recent prints couldn't be archived with thumbnails`,body:`The slicer didn't leave the .gcode.3mf on the printer's SD card, so Bambuddy couldn't pull the thumbnail or slicer metadata. This is usually because "Store sent files on external storage" is off in the slicer (Bambu Studio / OrcaSlicer Device tab).`,docsLink:`See install step 4`,dismissLabel:`Dismiss this notice`,docsLinkInternalStorage:`Why this happens`,titleInternalStorage:`Some recent prints stayed on the printer's internal storage`,bodyInternalStorage:`Bambu Studio put the sliced file on the printer's internal storage instead of the card, so there was nothing for Bambuddy to read over FTP. On H2-series, P2S and X2D its Print button always does that — only Send offers a choice, and that defaults to Cache too. Those prints are still archived with their name and timing, just without a thumbnail or slicer metadata. For complete archives, start the print from Bambuddy, or slice in OrcaSlicer — or in Bambu Studio use Send with External selected and start the print afterwards. All of them need a card or stick in the printer.`,titleNoExternalStorage:`Some recent prints couldn't be archived — no storage in the printer`,bodyNoExternalStorage:`The printer reports no card or stick in its slot, so the sliced file had nowhere to land and Bambuddy had nothing to read. Insert one and the next print will archive in full.`,titleInternalHistory:`Some recent prints were started from a file already on the printer`,bodyInternalHistory:`Those prints ran from the printer's own library — a re-print from its screen, a start from Handy, or a file sent earlier and printed later. Bambuddy reads print files over FTP, which serves only the card or stick, while the printer keeps that library in an area FTP cannot reach, so there was no 3MF to read. No slicer setting changes this, because nothing was sent for these prints. They are still archived with their name and timing, and Edit Archive lets you fill in the filament used by hand. For a complete archive, start the print from Bambuddy or from your slicer instead.`,titleFtpsCooloff:`Some recent prints couldn't be archived — the printer refused the file connection`,bodyFtpsCooloff:`Bambuddy opened the printer's file-transfer port (FTPS 990) and the printer answered with something that is not TLS, so nothing could be read from it. Those prints are still archived with their name and timing, just without a thumbnail or slicer metadata. This is not a slicer setting and not something you changed — the same models and firmware run normally on other installs, and an affected printer usually works again later on its own. After such a failure Bambuddy pauses transfers to that printer for five minutes and comes back for the file once the pause clears, so a short episode fills itself in; a card still empty means the refusal outlasted the retry. What triggers it is not yet known. If it keeps happening, turn on debug logging on the System page and attach a support bundle to your report.`,titleFtpTransferFailed:`Some recent prints couldn't be archived — the file transfer ran out of time`,bodyFtpTransferFailed:`The sliced file was on the printer's card and the printer served it, but the transfer did not finish in the time allowed. At print start the printer is also handling its camera, its status messages and the job upload, and a large 3MF does not always get through against all that. Those prints are still archived with their name and timing, just without a thumbnail or slicer metadata. This is not a slicer setting and not something you changed. Bambuddy comes back for the file three times over the following ten minutes, so most of these fill themselves in; a card still empty means every attempt ran out of time too. If it keeps happening, raise Connection Timeout under Settings > Network > FTP Retry.`},searchPlaceholder:`Search archives...`,filterByPrinter:`Filter by printer`,filterByStatus:`Filter by status`,sortBy:`Sort by`,sortNewest:`Newest first`,sortOldest:`Oldest first`,sortName:`Name`,sortDuration:`Duration`,sortLargest:`Largest first`,sortSmallest:`Smallest first`,sortSize:`Size`,noArchives:`No archives found`,noArchivesSearch:`No archives match your search`,originalPrintNotVisible:`Original print not visible - try clearing filters`,noArchivesYet:`No archives yet`,prints:`prints`,pagination:{showing:`Showing`,to:`to`,of:`of`,show:`Show`,page:`Page`,all:`All`},loadingArchives:`Loading archives...`,releaseToUpload:`Release to upload`,showAll:`Show all`,showFavoritesOnly:`Show favorites only`,gridView:`Grid view`,listView:`List view`,calendarView:`Calendar view`,logView:`Print Log`,manageTags:`Manage Tags`,showFailedPrints:`Show failed prints`,hideFailedPrints:`Hide failed prints`,hideDuplicates:`Hide Duplicates`,viewOriginalPrint:`Click to view original print (#{{id}})`,printTime:`Print Time`,filamentUsed:`Filament Used`,cost:`Cost`,preview:`Preview`,deleteArchive:`Delete Archive`,deleteConfirm:`Are you sure you want to delete this archive?`,favorite:`Favorite`,unfavorite:`Remove from favorites`,viewDetails:`View Details`,status:{completed:`Completed`,failed:`Failed`,stopped:`Stopped`},toast:{source3mfAttached:`Source 3MF attached: {{filename}}`,failedUploadSource3mf:`Failed to upload source 3MF`,source3mfRemoved:`Source 3MF removed`,failedRemoveSource3mf:`Failed to remove source 3MF`,f3dAttached:`F3D attached: {{filename}}`,failedUploadF3d:`Failed to upload F3D`,f3dRemoved:`F3D removed`,failedRemoveF3d:`Failed to remove F3D`,timelapseAttached:`Timelapse attached: {{filename}}`,timelapseAlreadyAttached:`Timelapse already attached`,noMatchingTimelapse:`No matching timelapse found`,failedScanTimelapse:`Failed to scan for timelapse`,failedAttachTimelapse:`Failed to attach timelapse`,timelapseRemoved:`Timelapse removed`,failedRemoveTimelapse:`Failed to remove timelapse`,timelapseUploaded:`Timelapse uploaded: {{filename}}`,failedUploadTimelapse:`Failed to upload timelapse`,archiveDeleted:`Archive deleted`,failedDeleteArchive:`Failed to delete archive`,addedToFavorites:`Added to favorites`,removedFromFavorites:`Removed from favorites`,projectUpdated:`Project updated`,failedUpdateProject:`Failed to update project`,linkCopied:`Link copied to clipboard`,failedCopyLink:`Failed to copy link`,photoDeleted:`Photo deleted`,failedDeletePhoto:`Failed to delete photo`,failedDeleteArchives:`Failed to delete archives`,failedUpdateFavorites:`Failed to update favorites`,exportDownloaded:`Export downloaded`,exportFailed:`Export failed`},menu:{print:`Print`,openInBambuStudio:`Open in Slicer`,slice:`Slice`,externalLink:`External Link`,viewOnMakerWorld:`View on MakerWorld`,preview3d:`3D Preview`,viewTimelapse:`View Timelapse`,scanForTimelapse:`Scan for Timelapse`,uploadTimelapse:`Upload Timelapse`,removeTimelapse:`Remove Timelapse`,downloadSource3mf:`Download Source 3MF`,uploadSource3mf:`Upload Source 3MF`,replaceSource3mf:`Replace Source 3MF`,removeSource3mf:`Remove Source 3MF`,uploadF3d:`Upload F3D`,replaceF3d:`Replace F3D`,downloadF3d:`Download F3D`,removeF3d:`Remove F3D`,download:`Download`,copyDownloadLink:`Copy Download Link`,qrCode:`QR Code`,viewPhotos:`View Photos`,viewPhotosCount:`View Photos ({{count}})`,projectPage:`Project Page`,addToFavorites:`Add to Favorites`,removeFromFavorites:`Remove from Favorites`,edit:`Edit`,printLog:`Print Log`,goToProject:`Go to Project: {{name}}`,addToProject:`Add to Project`,removeFromProject:`Remove from Project`,loading:`Loading...`,noProjectsAvailable:`No projects available`,searchProjects:`Search projects…`,select:`Select`,deselect:`Deselect`,delete:`Delete`},permission:{noReprint:`You do not have permission to reprint this archive`,noAddToQueue:`You do not have permission to add to queue`,noUpdateArchives:`You do not have permission to update archives`,noUploadFiles:`You do not have permission to upload files`,noDownload:`You do not have permission to download archives`,noCopyLink:`You do not have permission to copy download links`,noDelete:`You do not have permission to delete this archive`,noEdit:`You do not have permission to edit this entry`,noCreate:`You do not have permission to create archives`},platePicker:{title:`Select plate to preview`,hint:`This archive has multiple plates. Pick one to open in the GCode viewer.`,plateLabel:`Plate {{index}}`,objectCount:`{{count}} object`,objectCount_plural:`{{count}} objects`,noGcode:`This archive has no sliced G-code to preview. Open it in Bambu Studio to slice first.`},card:{previousPlate:`Previous plate`,nextPlate:`Next plate`,plateNumber:`Plate {{index}}`,moreOptions:`Right-click for more options`,addToFavorites:`Add to favorites`,removeFromFavorites:`Remove from favorites`,cancelled:`cancelled`,failed:`failed`,duplicate:`duplicate`,duplicateTitle:`This model has been printed before`,openSource3mf:`Open source 3MF in Bambu Studio (right-click for more options)`,downloadF3d:`Download Fusion 360 design file`,viewTimelapse:`View timelapse`,viewPhoto:`View 1 photo`,viewPhotos:`View {{count}} photos`,openFolder:`Open folder: {{name}}`,slicedFile:`Sliced file - ready to print`,sourceFile:`Source file only - no AMS mapping available`,gcode:`GCODE`,source:`SOURCE`,project:`Project: {{name}}`,runsBadge:`{{count}} prints`,runsBadgeTitle:`{{count}} prints total — {{successful}} successful, {{failed}} failed. Click to see the full print log.`,estimated:`Estimated: {{time}}`,actual:`Actual: {{time}}`,accuracy:`Accuracy: {{percent}}%`,filament:`{{weight}}g`,layer:`{{count}} layer`,layers:`{{count}} layers`,object:`{{count}} object`,objects:`{{count}} objects`,slicedFor:`Sliced for {{model}}`,uploadedBy:`Uploaded By`,noPermissionReprint:`You do not have permission to reprint`,noFileForReprint:`No 3MF file available — the file could not be downloaded from the printer when the print was recorded`,slicerAmsMapping:`AMS mapping saved ({{printer}})`,slicerAmsMappingTooltip:`The slicer's own AMS slot choice was saved for {{printer}}. Tray numbers only mean something on that printer, so a reprint reuses them only when it targets {{printer}} again.`,noPermissionEdit:`You do not have permission to edit archives`,noPermissionDelete:`You do not have permission to delete archives`,openInBambuStudio:`Open in Slicer`,openInBambuStudioToSlice:`Open in Slicer to slice`,slice:`Slice`,externalLink:`External Link`,makerWorld:`MakerWorld: {{designer}}`,viewProject:`View project`,noExternalLink:`No external link`,preview3d:`3D Preview`,download:`Download`,edit:`Edit`,delete:`Delete`},runLog:{title:`Print Log`,modalTitle:`Print Log — {{name}}`,modalTitleFallback:`this archive`,empty:`No print events recorded for this archive yet.`,col:{date:`Date`,status:`Status`,duration:`Duration`,filament:`Filament`,cost:`Cost`},status:{completed:`Completed`,failed:`Failed`,cancelled:`Cancelled`,stopped:`Stopped`,skipped:`Skipped`,printing:`Printing`}},modal:{deleteArchive:`Delete Archive`,deleteConfirm:`Are you sure you want to delete "{{name}}"? This action cannot be undone.`,deleteButton:`Delete`,deletePurgeStats:`Also remove this print from Quick Stats (filament, time, cost, energy)`,deleteQueueItemsWarning:`{{count}} queue item(s) linked to this archive will also be removed.`,deleteBlockedByPrinting:`Cannot delete — {{count}} queue item(s) are currently printing. Stop the print first, then retry.`,removeSource3mf:`Remove Source 3MF`,removeSource3mfConfirm:`Are you sure you want to remove the source 3MF file from "{{name}}"? This will delete the original slicer project file.`,removeButton:`Remove`,removeF3d:`Remove F3D`,removeF3dConfirm:`Are you sure you want to remove the Fusion 360 design file from "{{name}}"?`,removeTimelapse:`Remove Timelapse`,removeTimelapseConfirm:`Are you sure you want to remove the timelapse video from "{{name}}"?`,timelapse:`{{name}} - Timelapse`,selectTimelapse:`Select Timelapse`,selectTimelapseDesc:`No auto-match found. Select the timelapse for this print:`,deleteArchives:`Delete Archives`,deleteArchivesConfirm:`Are you sure you want to delete {{count}} archive(s)? This action cannot be undone.`,deleteCount:`Delete {{count}}`},page:{title:`Archives`,printsCount:`{{filtered}} of {{total}} prints`,dropFilesHere:`Drop .3mf files here`,releaseToUpload:`Release to upload`,only3mfSupported:`Only .3mf files are supported`,close:`Close`,selected:`{{count}} selected`,selectAll:`Select All`,tags:`Tags`,project:`Project`,favorite:`Favorite`,delete:`Delete`,toggledFavorites:`Toggled favorites for {{count}} archive(s)`,failedUpdateFavorites:`Failed to update favorites`,archivesDeleted:`{{count}} archive(s) deleted`,failedDeleteArchives:`Failed to delete archives`,photoDeleted:`Photo deleted`,failedDeletePhoto:`Failed to delete photo`},list:{name:`Name`,printer:`Printer`,date:`Date`,size:`Size`,actions:`Actions`,hasTimelapse:`Has timelapse`},log:{date:`Date`,printName:`Print Name`,printer:`Printer`,user:`User`,status:`Status`,duration:`Duration`,filament:`Filament`,filamentUsed:`Filament Used`,cost:`Cost`,energy:`Energy`,energyCost:`Energy Cost`,completedAt:`Finished`,columns:`Columns`,sortBy:`Sort by {{column}}`,allPrinters:`All Printers`,allUsers:`All Users`,allStatuses:`All Statuses`,cancelled:`Cancelled`,skipped:`Skipped`,dateFrom:`From`,dateTo:`To`,noEntries:`No print log entries found`,showing:`Showing {{count}} of {{total}} entries`,rowsPerPage:`Rows`,page:`Page`,prev:`Prev`,next:`Next`,clearLog:`Clear Log`,clearLogTitle:`Clear Print Log`,clearLogConfirm:`All print log entries will be permanently deleted. Archives and queue items are not affected. This action cannot be undone. Are you sure?`,clearLogButton:`Clear All`,cleared:`{{count}} log entries cleared`,clearFailed:`Failed to clear print log`,deleteEntryTitle:`Delete print log entry`,deleteEntryConfirm:`This entry will be removed from the log and its filament, time, and cost contributions will drop out of Quick Stats. The matching archive (if any) is not affected. This action cannot be undone.`,entryDeleted:`Print log entry deleted`,entryDeleteFailed:`Failed to delete print log entry`,editEntryTitle:`Edit print log entry`,editEntryDescription:`Classify this print run. The Failure Analysis widget groups by these values, so updates flow through to stats immediately.`,entryUpdated:`Print log entry updated`,entryUpdateFailed:`Failed to update print log entry`,statuses:{completed:`Completed`,failed:`Failed`,stopped:`Stopped`,cancelled:`Cancelled`,skipped:`Skipped`}}},dispatchToast:{untitled:`Print job`,startingPrints:`Starting prints`,progressSummary:`{{complete}}/{{total}} complete • Processing: {{processing}}`,expandDetails:`Expand dispatch details`,collapseDetails:`Collapse dispatch details`,awaitingPrinter:`Awaiting printer…`,status:{processing:`Processing`,completed:`Completed`,failed:`Failed`},failed:{generic:`Dispatch failed`,upload_failed:`Upload to printer failed`,start_command_failed:`Printer rejected start command`},dismiss:`Dismiss`},pipelineRuns:{title:`Pipeline Runs`,loading:`Loading…`,empty:`No pipeline runs yet.`,filter:{pipeline:`Pipeline`,status:`Status`,target:`Target`,all:`All`,allPipelines:`All pipelines`,allStatus:`All statuses`,allTargets:`All targets`,clear:`Clear filters`,noMatches:`No runs match the current filters.`},totalCount_one:`{{n}} run`,totalCount_other:`{{n}} runs`,copies:`{{n}} copies`,failedCount:`{{n}} failed`,copyN:`Copy {{n}}`,retryFailed:`Retry failed`,retryOf:`retry of #{{n}}`,pagination:`{{start}}–{{end}} of {{total}}`,cancelledByUser:`Cancelled by user`,toast:{cancelled:`Run cancelled`,cancelFailed:`Cancel failed`,retryStarted:`Retry started`,retryFailed:`Retry failed`,cleared:`{{n}} runs cleared`,clearFailed:`Clear failed`},clearLog:`Clear log`,clearConfirmTitle:`Clear log?`,clearConfirmBody:`Delete every completed, failed, cancelled, and partial-failure pipeline run? In-flight runs are kept. This cannot be undone.`,clearConfirmAction:`Clear`,jobStatus:{pending:`pending`,awaiting_printer:`awaiting printer`,queued:`queued`,printing:`printing`,completed:`completed`,failed:`failed`,cancelled:`cancelled`}},queue:{title:`Print Queue`,subtitle:`Schedule and manage your print jobs`,filamentShort:{rowBadge:`Insufficient filament for the assigned spool`,rowTooltip:`The dispatch scheduler flagged this item. Click Play to see the per-slot deficit and decide whether to print anyway.`,confirmTitle:`Insufficient filament`,confirmIntro:`The assigned spool cannot satisfy at least one slot. Print anyway?`,lineItem:`Slot {{slot}}: needs {{required}} g, {{remaining}} g remaining`,unknown:`unknown`,printAnyway:`Print Anyway`},slicerAmsMapping:{rowBadge:`AMS slots saved for this printer`,rowTooltip:`This archive carries the exact AMS slots the slicer picked, saved for the printer this item targets. A reprint on it can reuse those trays instead of matching again by type and colour.`},editQueueItem:`Edit Queue Item`,selectAllPlates:`Select All {{count}} Plates`,deselectAll:`Deselect All`,printQueued:`Print queued`,printQueuedWillStartWhenIdle:`Will start when printer is idle`,itemsQueued:`{{count}} items queued`,sending:`Sending...`,sendingProgress:`Sending {{current}}/{{total}}...`,adding:`Adding...`,addingProgress:`Adding {{current}}/{{total}}...`,savingProgress:`Saving {{current}}/{{total}}...`,clearQueue:`Clear Queue`,clearHistory:`Clear History`,emptyQueue:`Queue is empty`,position:`Position`,scheduledTime:`Scheduled Time`,moveUp:`Move Up`,moveDown:`Move Down`,startNow:`Start Now`,printingInProgress:`Printing in progress...`,viewArchive:`View archive`,viewInFileManager:`View in File Manager`,itemCount:`{{count}} item`,itemCount_plural:`{{count}} items`,dragToReorder:`Drag to reorder (ASAP only)`,reorderHint:`Position only affects ASAP items. Scheduled items run at their set time.`,sjf:{label:`SJF`,tooltip:`Shortest Job First — scheduler prioritizes shorter prints`},addedBy:`Added by {{name}}`,nextInQueue:`Next in queue`,clearPlateSuccess:`Plate cleared — ready for next print`,plateNumber:`Plate {{index}}`,quantity:`Quantity`,quantityHint:`Creates {{count}} queue items`,plateQuantityLabel:`Runs of {{plate}}`,plateQuantityTotal_one:`{{count}} run in total`,plateQuantityTotal_other:`{{count}} runs in total`,batchOrders:{title:`Batch Orders`,emptyTitle:`No batch orders`,emptyDescription:`Queue a multi-plate file, or more than one copy of a plate, and the order shows up here with its progress.`,filter:{active:`Active`,completed:`Completed`,cancelled:`Cancelled`,all:`All`},status:{active:`Active`,completed:`Completed`,cancelled:`Cancelled`},noTargets:`Grouping only`,noTargetsHint:`Created before per-plate targets existed, so it tracks the runs it queued rather than a target.`,dispatchRemaining:`Queue {{count}} remaining`,dispatchPlate:`Queue remaining`,strandedPlate:`Nothing left to copy settings from`,strandedNotice:`Cannot queue {{runs}} of the {{owed}} runs still owed: that plate has no queued or finished run left to copy settings from. Queue the plate once from the file, or cancel the order.`,dispatched:`Queued the remaining runs for {{name}}`,plateProgress:`{{completed}} of {{target}} done`,remaining:`{{count}} still owed`,failed:`{{count}} failed`,printing:`{{count}} printing`,wholeFile:`Whole file`,due:`Due {{date}}`,costSoFar:`{{amount}} so far`,costRemaining:`({{amount}} to go)`},activeBatches:`Active Batches`,batchProgress:`{{completed}} of {{total}} completed`,cancelBatch:`Cancel Remaining`,batchCancelled:`Remaining batch items cancelled`,cancelBatchConfirmTitle:`Cancel Batch`,cancelBatchConfirmMessage:`Close this order? Any runs still queued are cancelled, and it stops asking for what it has not produced.`,batch:{defaultName:`Batch`,label:`{{count}} item`,label_plural:`{{count}} items`,pendingCount:`{{count}} pending`,pendingCount_plural:`{{count}} pending`,expand:`Expand batch`,collapse:`Collapse batch`,groupAsBatch:`Group as batch…`,groupAsBatchDescription:`Combine the {{count}} selected items into a single collapsible batch.`,nameLabel:`Batch name`,namePlaceholder:`e.g. Friday gifts`,create:`Create batch`,ungroup:`Ungroup`,ungroupConfirmTitle:`Ungroup batch?`,ungroupConfirmMessage:`The items will stay in the queue but no longer be grouped together.`,dragGroup:`Drag group`},tabs:{batches:`Batches`,queue:`Queue`,history:`History`,timeline:`Timeline`,pipelines:`Pipelines`},layout:{flatList:`List`,byPrinter:`By Printer`,groupByPrinter:`Group by Printer`},history:{emptyTitle:`No history yet`,emptyDescription:`Completed, cancelled, and failed prints will appear here.`,showMore:`Show more`,showingCount:`Showing {{shown}} of {{total}}`},dragGhost:{multiCount:`{{count}} items`,batch:`{{name}} ({{count}} copy)`,batch_plural:`{{name}} ({{count}} copies)`},sections:{currentlyPrinting:`Currently Printing`,queued:`Queued`,history:`History`},status:{pending:`Pending`,waiting:`Waiting`,printing:`Printing`,paused:`Paused`,completed:`Completed`,failed:`Failed`,skipped:`Skipped`,cancelled:`Cancelled`},summary:{printing:`Printing`,queued:`Queued`,totalTime:`Total Queue Time`,totalWeight:`Total Queue Weight`,history:`History`},filter:{allPrinters:`All Printers`,unassigned:`Unassigned`,allStatus:`All Status`,allLocations:`All Locations`,any:`Any`},sort:{byPosition:`Sort by Position`,byName:`Sort by Name`,byPrinter:`Sort by Printer`,bySchedule:`Sort by Schedule`,byDate:`Sort by Date`,ascendingOldest:`Ascending (oldest first)`,descendingNewest:`Descending (newest first)`},badges:{staged:`Staged`,requiresPrevious:`Requires previous success`,autoPowerOff:`Auto power off`,gcodeInjection:`G-code`},empty:{title:`No prints scheduled`,description:`Schedule a print from the Archives page using the "Schedule" option in the context menu, or drag and drop files to get started.`},time:{etaIfStartedNow:`Completion time if this job started now`,whenFree:`When a printer is free`,overdue:`Overdue`,now:`Now`,lessThanMinute:`In less than a minute`,inMinutes:`In {{count}} min`,inHours:`In {{count}} hours`},actions:{startPrint:`Start Print`,stopPrint:`Stop Print`,requeue:`Re-queue`},bulkEdit:{title:`Edit {{count}} Item`,title_plural:`Edit {{count}} Items`,description:`Only changed settings will be applied to selected items.`,printer:`Printer`,noChange:`— No change —`,queueOptions:`Queue Options`,staged:`Staged (manual start)`,autoPowerOff:`Auto power off after print`,requirePrevious:`Require previous success`,gcodeInjection:`Inject G-code`,printOptions:`Print Options`,bedLevelling:`Bed levelling`,flowCalibration:`Flow calibration`,vibrationCalibration:`Vibration calibration`,layerInspection:`First layer inspection`,timelapse:`Timelapse`,useAms:`Use AMS`,nozzleOffsetCali:`Nozzle offset calibration`,applyChanges:`Apply Changes`,selectAll:`Select All`,deselectAll:`Deselect All`,selected:`{{count}} selected`,editSelected:`Edit Selected`,cancelSelected:`Cancel Selected`},confirm:{cancelTitle:`Cancel Scheduled Print`,cancelMessage:`Are you sure you want to cancel "{{name}}"?`,stopTitle:`Stop Print`,stopMessage:`Are you sure you want to stop the current print "{{name}}"? This will cancel the print job on the printer.`,removeTitle:`Remove from History`,removeMessage:`Are you sure you want to remove "{{name}}" from the queue history?`,clearHistoryTitle:`Clear History`,clearHistoryMessage:`Are you sure you want to remove all {{count}} item(s) from the history?`,cancelButton:`Cancel Print`,stopButton:`Stop Print`,thisPrint:`this print`,thisItem:`this item`},toast:{cancelled:`Queue item cancelled`,cancelFailed:`Failed to cancel item`,removed:`Queue item removed`,keptForOrder:`Cancelled instead of removed: this is the only run its batch order can re-queue this plate from`,historyKeptForOrders:`Kept {{kept}} that batch orders still need.`,removeFailed:`Failed to remove item`,stopped:`Print stopped`,stopFailed:`Failed to stop print`,released:`Print released to queue`,startFailed:`Failed to start print`,reorderFailed:`Failed to reorder queue`,historyCleared:`Cleared {{count}} history item(s)`,clearHistoryFailed:`Failed to clear history`,updateFailed:`Failed to update items`,bulkCancelled:`Cancelled {{count}} item(s)`,bulkCancelFailed:`Failed to cancel items`,batchCreated:`Batch "{{name}}" created`,batchCreateFailed:`Failed to create batch`,batchUngrouped:`Ungrouped {{count}} item(s)`,batchUngroupFailed:`Failed to ungroup batch`,resumedAfterFailure:`Resumed queue — {{restored}} job(s) restored to pending`,resumeAfterFailureFailed:`Failed to resume queue`},resumeAfterFailure:{banner:`{{printer}} is blocked by a previous-print failure — {{count}} job(s) skipped`,bannerHint:`Fix the printer issue, then resume to restore the skipped jobs and clear the gate.`,button:`Resume after failure`,confirmTitle:`Resume queue after failure?`,confirmMessage:`Restore {{count}} skipped job(s) on {{printer}} to pending and clear the previous-print gate. Make sure the printer is ready before continuing.`},timeline:{listView:`List`,timelineView:`Timeline`,unassigned:`Unassigned`,noData:`No scheduled prints for this day`,nothingCommitted:`No committed schedules in this window. Staged items, waiting items, and ASAP jobs on idle printers are not shown — set a scheduled time or release a staged item to see it here.`,allDoneBy:`All prints estimated done by {{time}}`,staged:`Staged`,filterAll:`Show All`,filterPrinting:`Printing`,filterQueued:`Queued`,time:{anyMoment:`any moment`,minutesLeft:`{{minutes}}m left`,hoursLeft:`{{hours}}h left`,hoursMinutesLeft:`{{hours}}h {{minutes}}m left`},day:{previous:`Previous day`,next:`Next day`,today:`Today`},window:{back12h:`Back 12 hours`,forward12h:`Forward 12 hours`,now:`Now`},printerColumnHeader:`Printer`},permissions:{noStopPrint:`You do not have permission to stop prints`,noStartPrint:`You do not have permission to start prints`,noEdit:`You do not have permission to edit this queue item`,noCancel:`You do not have permission to cancel this queue item`,noRequeue:`You do not have permission to re-queue items`,noRemove:`You do not have permission to remove this queue item`,noClearHistory:`You do not have permission to clear all history`,noEditItems:`You do not have permission to edit queue items`,noCancelItems:`You do not have permission to cancel queue items`}},stats:{title:`Statistics`,subtitle:`Drag widgets to rearrange. Click the eye icon to hide.`,overview:`Overview`,totalPrints:`Total Prints`,successRate:`Success Rate`,totalPrintTime:`Total Print Time`,printTime:`Print Time`,totalFilament:`Total Filament Used`,filamentUsed:`Filament Used`,filamentCost:`Filament Cost`,totalCost:`Total Cost`,energyUsed:`Energy Used`,energyCost:`Energy Cost`,energyWarmingUpTooltip:`Energy tracking is still collecting hourly snapshots. Date-range totals will become accurate once at least one snapshot exists before the selected range. Early values may undercount.`,averagePrintTime:`Average Print Time`,printsPerDay:`Prints per Day`,byPrinter:`By Printer`,printsByPrinter:`Prints by Printer`,byMaterial:`By Material`,byMonth:`By Month`,last7Days:`Last 7 Days`,last30Days:`Last 30 Days`,last90Days:`Last 90 Days`,allTime:`All Time`,quickStats:`Quick Stats`,printActivity:`Print Activity`,filamentTypes:`Filament Types`,filamentTrends:`Filament Trends`,failureAnalysis:`Failure Analysis`,timeAccuracy:`Time Accuracy`,successful:`Successful:`,failed:`Failed:`,cancelled:`Cancelled:`,perfectEstimate:`100% = perfect estimate`,noTimeAccuracyData:`No time accuracy data yet`,noFilamentData:`No filament data available`,noPrinterData:`No printer data available`,noPrintData:`No print data available`,noPrintDataLast30Days:`No print data in the last 30 days`,failureReasons:`Failure Reasons`,topFailureReasons:`Top Failure Reasons`,failedPrintsCount:`{{failed}} / {{total}} prints failed`,lastWeekRate:`Last week: {{rate}}%`,resetLayout:`Reset Layout`,recalculateCosts:`Recalculate Costs`,recalculateCostsHint:`Recalculate all archive costs using current filament prices`,exportStats:`Export Stats`,exportAsCsv:`Export as CSV`,exportAsExcel:`Export as Excel`,hiddenCount:`{{count}} Hidden`,exportDownloaded:`Export downloaded`,exportFailed:`Export failed`,layoutReset:`Layout reset`,recalculatedCosts:`Recalculated costs for {{count}} archives`,recalculateFailed:`Failed to recalculate costs`,loadingStats:`Loading statistics...`,noPermissionResetLayout:`You do not have permission to reset layout`,noPermissionRecalculate:`You do not have permission to recalculate costs`,noPrintDataInRange:`No print data in selected range`,periodFilament:`Period Filament`,periodCost:`Period Cost`,avgPerPrint:`Avg per Print`,usageOverTime:`Usage Over Time`,energyOverTime:`Energy Over Time`,filamentByWeight:`Weight`,printDuration:`Print Duration`,printerUtilization:`Printer Utilization`,filamentSuccess:`Success by Material`,printHabits:`Print Habits`,printTimeOfDay:`Print Time of Day`,colorDistribution:`Color Distribution`,noColorData:`No color data available`,records:`Records`,longestPrint:`Longest Print`,heaviestPrint:`Heaviest Print`,mostExpensivePrint:`Most Expensive`,busiestDay:`Busiest Day`,successStreak:`Success Streak`,streakPrint:`consecutive print`,streakPrints:`{{count}} consecutive prints`,printerStats:`Printer Stats`,hours:`hours`,avgPrints:`Avg. prints`,noArchiveData:`No print data available`,filamentByTime:`Time`,avgWeight:`Avg. weight`,avgTime:`Avg. time`,filamentByPrints:`Prints`,timeframe:{today:`Today`,"this-week":`This Week`,"this-month":`This Month`,"last-7":`Last 7 Days`,"last-30":`Last 30 Days`,"last-90":`Last 90 Days`,"this-year":`This Year`,"all-time":`All Time`,custom:`Custom Range`,from:`From`,to:`To`},allUsers:`All Users`,noUser:`No User (System)`,filterByUser:`Filter by User`},maintenance:{title:`Maintenance`,overview:`Overview`,allOk:`All maintenance up to date`,dueCount:`{{count}} item due`,dueCount_plural:`{{count}} items due`,warningCount:`{{count}} warning`,warningCount_plural:`{{count}} warnings`,totalPrintTime:`Total Print Time`,nextMaintenance:`Next Maintenance`,nothingDue:`Nothing due`,tasks:`Tasks`,lastPerformed:`Last performed`,interval:`Interval`,hoursRemaining:`{{hours}}h remaining`,hoursOverdue:`{{hours}}h overdue`,markDone:`Mark as Done`,performMaintenance:`Perform Maintenance`,history:`History`,noHistory:`No maintenance history`,editPrintHours:`Edit Print Hours`,currentHours:`Current Hours`,statusTab:`Status`,settingsTab:`Settings`,overdueCount:`{{count}} overdue`,dueSoonCount:`{{count}} due soon`,dueSoon:`Due soon`,allGood:`All good`,overdueBy:`Overdue by {{duration}}`,dueIn:`Due in {{duration}}`,timeLeft:`{{duration}} left`,day:`1 day`,days:`{{count}} days`,week:`1 week`,weeks:`{{count}} weeks`,month:`1 month`,months:`{{count}} months`,year:`1 year`,maintenanceTypes:`Maintenance Types`,maintenanceTypesDescription:`System types and your custom maintenance tasks`,addCustomType:`Add Custom Type`,restoreDefaults:`Restore Default Tasks`,intervalType:`Interval Type`,intervalValue:`Interval ({{type}})`,icon:`Icon`,documentationLink:`Documentation Link (optional)`,assignToPrinters:`Assign to Printers`,selectAtLeastOnePrinter:`Select at least one printer`,addType:`Add Type`,custom:`Custom`,printHours:`Print Hours`,calendarDays:`Calendar Days`,exampleName:`e.g., Replace HEPA Filter`,viewDocumentation:`View documentation`,timeBasedInterval:`Time-based interval`,intervalOverrides:`Interval Overrides`,intervalOverridesDescription:`Customize intervals for specific printers`,assignedToPrinters:`Assigned to printers:`,noPrintersAssigned:`No printers assigned`,addPrinterShort:`Add:`,printersAssignedClick:`{{count}} printer(s) assigned - click to manage`,removeFromPrinter:`Remove from this printer`,types:{lubricateCarbonRods:`Lubricate Carbon Rods`,lubricateRails:`Lubricate Linear Rails`,cleanNozzle:`Clean Nozzle/Hotend`,checkBelts:`Check Belt Tension`,cleanBuildPlate:`Clean Build Plate`,checkExtruder:`Check Extruder Gears`,checkCooling:`Check Cooling Fans`,generalInspection:`General Inspection`,cleanCarbonRods:`Clean Carbon Rods`,lubricateSteelRods:`Lubricate Steel Rods`,cleanSteelRods:`Clean Steel Rods`,cleanLinearRails:`Clean Linear Rails`,checkPtfeTube:`Check PTFE Tube`,replaceHepaFilter:`Replace HEPA Filter`,replaceCarbonFilter:`Replace Carbon Filter`,lubricateLeftNozzleRail:`Lubricate Left Nozzle Rail`},maintenanceComplete:`Maintenance marked as complete`,typeUpdated:`Maintenance type updated`,typeDeleted:`Maintenance type deleted`,defaultsRestored:`Restored {{count}} default task(s)`,printHoursUpdated:`Print hours updated`,printerAssigned:`Printer assigned`,printerRemoved:`Printer removed`,deleteTypeConfirm:`Delete "{{name}}"?`,deleteSystemTypeTitle:`Delete default maintenance task?`,deleteSystemTypeMessage:`Are you sure you want to delete the default maintenance task "{{name}}"?`,noPermissionUpdate:`You do not have permission to update maintenance items`,noPermissionPerform:`You do not have permission to perform maintenance`,noPermissionEditTypes:`You do not have permission to edit maintenance types`,noPermissionDeleteTypes:`You do not have permission to delete maintenance types`,noPermissionEditHours:`You do not have permission to edit print hours`,noPermissionRemovePrinter:`You do not have permission to remove printer assignments`,noPermissionAssignPrinter:`You do not have permission to assign printers`,noPermissionEditIntervals:`You do not have permission to edit intervals`,configureSettings:`Configure maintenance types and intervals`},settings:{sliceEngine:`Slice engine`,sliceEngineSidecar:`Server sidecar`,sliceEngineSidecarHint:`Slicing runs on the server, in the slicer sidecar container.`,sliceEngineBrowser:`In browser`,sliceEngineBrowserHint:`Slicing runs on this device, with no server involved.`,title:`Settings`,general:`General`,tabs:{general:`General`,smartPlugs:`Smart Plugs`,sensors:`Sensors`,notifications:`Notifications`,queue:`Workflow`,queueDispatch:`Queue & Dispatch`,queuePipelines:`Pipelines`,filament:`Filament`,network:`Network`,apiKeys:`API Keys`,virtualPrinter:`Virtual Printer`,spoolbuddy:`SpoolBuddy`,failureDetection:`Failure Detection`,users:`Authentication`,backup:`Backup`,emailAuth:`Email Authentication`,ldap:`LDAP`,twoFa:`Two-Factor Auth`,oidc:`SSO / OIDC`,security:`Security`},spoolbuddy:{infoTitle:`SpoolBuddy devices`,infoBody:`SpoolBuddy kiosks register themselves automatically via heartbeat. Unregister a device here if it is no longer in use or if a stale duplicate was left behind by a daemon crash.`,duplicatesTitle:`{{count}} devices registered`,duplicatesBody:`Only the first registered device is used by the kiosk UI. If one of these is a stale duplicate from a crash, unregister it — an online device will re-register itself on its next heartbeat.`,empty:`No SpoolBuddy devices registered yet.`,online:`Online`,offline:`Offline`,unregister:`Unregister`,unregisterSuccess:`Device unregistered`,unregisterError:`Failed to unregister device`,confirmTitle:`Unregister SpoolBuddy device?`,confirmBody:`This will remove "{{hostname}}" ({{deviceId}}) from the database. If the device is online, it will re-register itself on its next heartbeat.`,ipAddress:`IP address`,firmware:`Firmware`,lastSeen:`Last seen`,daemonUptime:`Daemon uptime`,systemUptime:`System uptime`,never:`never`,nfc:`NFC`,scale:`Scale`,cpuTemp:`CPU temp`,cpuLoad:`CPU load`,memory:`Memory`,disk:`Disk`,update:`Update`,updateConfirmTitle:`Update Spoolbuddy daemon?`,updateConfirmBody:`Trigger a software update on "{{hostname}}"? The daemon will restart once the update is applied.`,restartBrowser:`Restart Browser`,restartBrowserConfirmTitle:`Restart kiosk browser?`,restartBrowserConfirmBody:`Restart the kiosk browser on "{{hostname}}"? The display will blank briefly.`,restartDaemon:`Restart Daemon`,restartDaemonConfirmTitle:`Restart Spoolbuddy daemon?`,restartDaemonConfirmBody:`Restart the Spoolbuddy daemon on "{{hostname}}"? The device will go offline for a few seconds.`,reboot:`Reboot`,rebootConfirmTitle:`Reboot device?`,rebootConfirmBody:`Reboot "{{hostname}}"? The device will be offline for around a minute.`,shutdown:`Shutdown`,shutdownConfirmTitle:`Shutdown device?`,shutdownConfirmBody:`Shutdown "{{hostname}}"? You will need physical access to power it back on.`,commandConfirm:`Confirm`,commandQueued:`Command queued`,commandError:`Failed to send command`},ldap:{title:`LDAP Authentication`,enabledDesc:`LDAP authentication is enabled`,disabledDesc:`LDAP authentication is disabled`,disabledHint:`Configure and save LDAP settings below, then enable.`,enabled:`LDAP authentication enabled`,disabled:`LDAP authentication disabled`,feature1:`Users can login with LDAP credentials`,feature2:`Local admin account remains as fallback`,feature3:`LDAP groups are mapped to BamBuddy groups on login`,serverConfig:`LDAP Server Configuration`,serverUrl:`Server URL`,serverUrlHint:`Use ldaps:// for SSL or ldap:// with StartTLS`,security:`Security`,securityHint:`StartTLS upgrades a plain connection to TLS. LDAPS uses TLS from the start.`,bindDn:`Bind DN (Service Account)`,bindPassword:`Bind Password`,searchBase:`Search Base DN`,userFilter:`User Search Filter`,userFilterHint:`{username} is replaced with the login username. Use (uid={username}) for OpenLDAP.`,advanced:`Advanced`,autoProvision:`Auto-provision users`,autoProvisionHint:`Automatically create a BamBuddy account on first LDAP login`,defaultGroup:`Default group`,defaultGroupNone:`— None (no fallback) —`,defaultGroupHint:`Fallback group assigned when an LDAP user authenticates but is not listed in any mapped LDAP group. Leave empty to leave unmapped users without permissions.`,groupMapping:`Group Mapping (JSON)`,groupMappingHint:`Map LDAP group DNs to BamBuddy groups. Available groups: `,testConnection:`Test Connection`,settingsSaved:`LDAP settings saved`,errors:{serverRequired:`LDAP server URL is required`,searchBaseRequired:`Search base DN is required`,enableAuthFirst:`Enable authentication first`,configureLdapFirst:`Save LDAP settings first`}},email:{smtpSettings:`SMTP Configuration`,smtpHost:`SMTP Server`,smtpPort:`SMTP Port`,security:`Security`,authentication:`Authentication`,username:`Username`,password:`Password`,fromEmail:`From Email`,fromName:`From Name`,testConnection:`Test SMTP Connection`,testRecipient:`Test Recipient Email`,sendTest:`Send Test Email`,sending:`Sending...`,save:`Save Settings`,saving:`Saving...`,advancedAuth:`Advanced Authentication`,advancedAuthEnabled:`Advanced Authentication is enabled`,advancedAuthEnabledDesc:`Email-based user management features are active. New users will receive auto-generated passwords via email, and users can reset their passwords through the forgot password feature.`,advancedAuthDisabled:`Advanced Authentication is disabled`,advancedAuthDisabledDesc:`Enable advanced authentication to activate email-based features for user management.`,enable:`Enable`,disable:`Disable`,feature1:`Passwords are auto-generated and emailed to new users`,feature2:`Users can login with username or email`,feature3:`Forgot password feature is available`,feature4:`Admins can reset user passwords via email`,errors:{requiredFields:`Please fill in all required fields`,usernameRequired:`Username is required when authentication is enabled`,enterTestEmail:`Please enter a test email address`,smtpServerAndEmail:`Please fill in SMTP Server and From Email before testing`,usernamePasswordRequired:`Username and Password are required when authentication is enabled`,configureSmtpFirst:`Please configure and test SMTP settings first`,enableAuthFirst:`Please enable authentication first to use email-based features.`},success:{settingsSaved:`SMTP settings saved successfully`},securityOptions:{starttls:`STARTTLS (Port 587)`,ssl:`SSL/TLS (Port 465)`,none:`None (Port 25)`},authOptions:{enabled:`Enabled`,disabled:`Disabled`}},appearance:`Appearance`,notifications:`Notifications`,smartPlugs:`Smart Plugs`,spoolman:`Spoolman`,updates:`Updates`,language:`Language`,languageDescription:`Select your preferred language`,theme:`Theme`,themeLight:`Light`,themeDark:`Dark`,themeSystem:`System`,defaultView:`Default View`,defaultViewDescription:`Page to show when opening the app`,checkForUpdates:`Check for Updates`,autoUpdate:`Auto Update`,currentVersion:`Current Version`,latestVersion:`Latest Version`,upToDate:`You are up to date`,updateAvailable:`Update available`,notificationLanguage:`Notification Language`,notificationLanguageDescription:`Language for push notifications`,bedCooledThreshold:`Bed Cooled Threshold`,bedCooledThresholdDescription:`Temperature below which the bed is considered cooled after a print`,userNotificationsEnabled:`User Notifications`,userNotificationsEnabledDescription:`Enable the user notifications menu and email notifications for print job events. Requires Advanced Authentication.`,userNotificationsDisabledHint:`Enable Advanced Authentication to use user notifications.`,notificationProviders:`Notification Providers`,addProvider:`Add Provider`,editProvider:`Edit Provider`,providerType:`Provider Type`,testNotification:`Test Notification`,testSuccess:`Test notification sent successfully`,testFailed:`Failed to send test notification`,quietHours:`Quiet Hours`,quietHoursDescription:`Do not disturb during these hours`,quietHoursStart:`Start`,quietHoursEnd:`End`,events:{title:`Notification Events`,printStart:`Print Started`,printComplete:`Print Completed`,printFailed:`Print Failed`,printStopped:`Print Stopped`,printProgress:`Progress Milestones`,printProgressDescription:`Notify at 25%, 50%, 75%`,printerOffline:`Printer Offline`,printerError:`Printer Error`,filamentLow:`Low Filament`,maintenanceDue:`Maintenance Due`,maintenanceDueDescription:`Notify when maintenance is needed`},smartPlug:{title:`Smart Plugs`,add:`Add Smart Plug`,edit:`Edit Smart Plug`,name:`Name`,ipAddress:`IP Address`,linkedPrinter:`Linked Printer`,autoOn:`Auto Power On`,autoOnDescription:`Turn on when print starts`,autoOff:`Auto Power Off`,autoOffDescription:`Turn off after print completes`,offDelay:`Off Delay`,offDelayMinutes:`Minutes after print`,offDelayTemp:`When nozzle below temperature`,currentState:`Current State`,turnOn:`Turn On`,turnOff:`Turn Off`},filamentTracking:`Filament Tracking`,filamentTrackingDesc:`Choose how to track your filament spools. You can use the built-in inventory or connect an external Spoolman server.`,autoAddUnknownRfid:`Auto-add unknown RFID spools`,autoAddUnknownRfidDesc:`Automatically create an inventory entry when a spool with an unknown RFID tag is detected. Turn off if you pre-register new spools manually to avoid duplicates.`,filamentChecks:`Filament checks`,disableFilamentWarnings:`Disable filament warnings`,disableFilamentWarningsDesc:`Don't show warnings about insufficient filament when printing or queueing`,preferLowestFilament:`Prefer lowest remaining filament`,preferLowestFilamentDesc:`When multiple spools match, use the one with the least filament remaining`,preferLowestFilamentBackupNote:`Only takes effect when AMS Filament Backup is enabled on the printer — otherwise the printer cannot switch to a second spool when the picked one runs out.`,trackingModeBuiltIn:`Built-in Inventory`,trackingModeBuiltInDesc:`RFID auto-matching and usage tracking included`,trackingModeSpoolmanDesc:`External filament management server`,builtInFeatureRfid:`Automatically detects Bambu Lab RFID spools in AMS`,builtInFeatureUsage:`Tracks filament consumption per print`,builtInFeatureCatalog:`Manage spools, colors, and K-factor profiles`,builtInFeatureThirdParty:`Third-party spools can be assigned to inventory spools`,amsSyncButton:`Sync Weights from AMS`,amsSyncTitle:`Sync Spool Weights from AMS`,amsSyncMessage:`This will overwrite all inventory spool weights with the current AMS remain% values from connected printers. Use this to recover from corrupted weight data. Printers must be online.`,amsSyncing:`Syncing...`,amsSyncSuccess:`{{synced}} spool(s) synced, {{skipped}} skipped`,amsSyncError:`Failed to sync weights from AMS`,spoolmanAmsSyncButton:`Sync Spoolman Weights from AMS`,spoolmanAmsSyncTitle:`Sync Spoolman Spool Weights from AMS`,spoolmanAmsSyncMessage:`This will update all Spoolman spool weights based on the current AMS remain% values from connected printers. Printers must be online.`,spoolmanAmsSyncing:`Syncing...`,spoolmanAmsSyncSuccess:`{{synced}} spool(s) synced, {{skipped}} skipped`,spoolmanAmsSyncError:`Failed to sync Spoolman weights from AMS`,spoolmanAmsSyncErrorUnreachable:`Failed to sync Spoolman weights (Spoolman unreachable)`,spoolmanAmsSyncErrorNotConfigured:`Failed to sync Spoolman weights (Spoolman not configured)`,spoolmanNotConfigured:`Spoolman not configured`,spoolmanFilamentCatalogTitle:`Spoolman Filament Catalog`,spoolmanFilamentCatalogDesc:`Filament names and tare weights from your Spoolman instance. Name and spool weight are editable here; all other properties are managed directly in Spoolman.`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`URL of your Spoolman server (e.g., http://localhost:7912)`,spoolmanConnected:`Connected`,spoolmanDisconnected:`Disconnected`,status:`Status`,connect:`Connect`,disconnect:`Disconnect`,howSyncWorks:`How Sync Works`,syncInfoRfidOnly:`Only official Bambu Lab spools with RFID are synced`,syncInfoAutoCreate:`New spools are auto-created in Spoolman on first sync`,syncInfoThirdPartySkipped:`Non-Bambu Lab spools (third-party, refilled) are skipped`,linkingExistingSpools:`Linking Existing Spools`,linkingExistingSpoolsDesc:`To link existing Spoolman spools to your AMS, hover over an AMS slot and click "Link to Spoolman".`,syncMode:`Sync Mode`,syncModeAuto:`Automatic`,syncModeManual:`Manual Only`,syncModeAutoDesc:`AMS data syncs automatically when changes are detected`,syncModeManualDesc:`Only sync when manually triggered`,syncAmsData:`Sync AMS Data`,syncAmsDataDesc:`Manually sync printer AMS data to Spoolman`,allPrinters:`All Printers`,noDefaultPrinter:`No default (ask each time)`,sidebarOrder:`Sidebar order`,saveThumbnails:`Save thumbnails`,captureFinishPhoto:`Capture finish photo`,noPrintersConfigured:`No printers configured`,archiveMode:{always:`Always create archive entry`,never:`Never create archive entry`,ask:`Ask each time`},checkForUpdatesLabel:`Check for updates`,checkPrinterFirmware:`Check printer firmware`,includeBetaUpdates:`Include beta versions`,includeBetaUpdatesDesc:`Notify about beta and prerelease versions when checking for updates`,localLogin:{disable:`Disable local username/password login`,disableHint:`When enabled, only SSO providers can sign in. LDAP is unaffected. Set BAMBUDDY_LOCAL_LOGIN=true on the server to keep a recovery path.`},enableRetry:`Enable retry`,homeAssistantDescription:`Control smart plugs via Home Assistant`,environmentManagedLabel:`(Environment Managed)`,autoEnabledViaEnv:`Automatically enabled via environment variables`,urlFromEnvReadOnly:`Value set by HA_URL environment variable (read-only)`,tokenFromEnvReadOnly:`Value set by HA_TOKEN environment variable (read-only)`,mqttConnectedTo:`Connected to`,prometheusDescription:`Expose printer data in Prometheus format`,noSmartPlugsTitle:`No smart plugs configured`,noSmartPlugsDescription:`Add a Tasmota-based smart plug to track energy usage and automate power control.`,noProvidersTitle:`No providers configured`,noProvidersDescription:`Add a provider to receive alerts.`,noTemplatesAvailable:`No templates available. Restart the backend to seed default templates.`,apiPermissionView:`View printer status and queue`,apiPermissionEdit:`Add and remove items from print queue`,apiKeysEmptyTitle:`No API keys`,apiKeysEmptyDescription:`Create an API key to integrate with external services.`,noUsersFound:`No users found`,noGroupsFound:`No groups found`,noGroupsAvailable:`No groups available`,passwordsDoNotMatch:`Passwords do not match`,systemGroupWarning:`System group names cannot be changed`,authDisabledTitle:`Authentication is Disabled`,authDisabledFeature1:`Require login to access the system`,authDisabledFeature2:`Create multiple users with group-based permissions`,authDisabledFeature3:`Control access with 50+ granular permissions`,userHasCreated:`This user has created:`,userItemsQuestion:`What would you like to do with these items?`,deleteUserConfirm:`Are you sure you want to delete this user?`,actionCannotBeUndone:`This action cannot be undone.`,addFirstSmartPlug:`Add Your First Smart Plug`,providers:`Providers`,log:`Log`,testAll:`Test All`,testResults:`Test Results`,testPassedCount:`{{count}} passed`,testFailedCount:`{{count}} failed`,messageTemplates:`Message Templates`,messageTemplatesDescription:`Customize notification messages for each event.`,apiKeys:`API Keys`,apiKeysDescription:`Create API keys for external integrations and webhooks.`,createKey:`Create Key`,apiKeyCreated:`API Key Created Successfully`,apiKeyCopyWarning:`Copy this key now - it won't be shown again!`,useInApiBrowser:`Use in API Browser`,apiKeyQrButton:`QR code`,apiKeyQrTitle:`Scan to configure`,apiKeyQrCaption:`Scan with your mobile app to add this server and API key.`,apiKeyQrWarning:`Contains your secret API key — don't share or screenshot it where others can see.`,createNewApiKey:`Create New API Key`,keyName:`Key Name`,keyNamePlaceholder:`e.g., Home Assistant, OctoPrint`,readStatus:`Read Status`,readStatusDescription:`View printer status, queue, library, archives, and slicer pipelines`,manageQueue:`Manage Queue`,manageQueueDescription:`Add and remove items from print queue. With Manage Library, run slicer pipelines`,controlPrinter:`Control Printer`,controlPrinterDescription:`Pause, resume, and stop prints`,manageLibrary:`Manage Library`,manageLibraryDescription:`Upload, rename, delete, and slice library files; import models from MakerWorld. With Manage Queue, run slicer pipelines`,manageInventory:`Manage Inventory`,manageInventoryDescription:`Create, update, and delete spools and inventory records. Required for SpoolBuddy kiosks (NFC scan, scale readings, kiosk system commands).`,manageMaintenance:`Manage Maintenance`,manageMaintenanceDescription:`Log completed maintenance, reset counters, edit intervals, and manage the maintenance-type catalog. Suited to Home Assistant automations that record "I cleaned the nozzle" without granting broader printer control.`,manageArchives:`Manage Archives`,manageArchivesDescription:`Edit and delete print archives, including removing old prints and their contribution to statistics. Suited to automations that prune the print history.`,manageProjects:`Manage Projects`,manageProjectsDescription:`Create, update, and delete projects, and add archives to them. Suited to automations that organize prints into projects.`,libraryBadge:`Library`,inventoryBadge:`Inventory`,maintenanceBadge:`Maintenance`,archivesBadge:`Archives`,projectsBadge:`Projects`,cloudAccess:`Allow cloud access`,cloudAccessDescription:`Read Bambu Cloud presets and filaments on your behalf. Requires you to be signed into Bambu Cloud.`,cloudBadge:`Cloud`,updateEnergyCost:`Update electricity price`,updateEnergyCostDescription:`Allow this key to POST a new per-kWh electricity price to /settings/electricity-price. Useful for Home Assistant dynamic-tariff automations (Tibber, Octopus, etc.). This is the only settings field writable via API key.`,energyCostBadge:`Energy`,legacyKey:`Legacy`,legacyKeyTooltip:`Created before per-user ownership; recreate to use cloud access`,unnamedKey:`Unnamed Key`,lastUsed:`Last used`,read:`Read`,control:`Control`,createFirstKey:`Create Your First Key`,webhookEndpoints:`Webhook Endpoints`,webhookApiKeyHint:`Use your API key in the X-API-Key header.`,webhook:{getAllStatus:`Get all printer status`,getSpecificStatus:`Get specific printer status`,addToQueue:`Add to print queue`,pausePrint:`Pause print`,resumePrint:`Resume print`,stopPrint:`Stop print`},apiBrowser:`API Browser`,apiBrowserDescription:`Explore and test all available API endpoints.`,apiKeyForTesting:`API Key for Testing`,apiKeyPlaceholder:`Paste your API key here to test authenticated endpoints...`,apiKeyHint:`This key will be sent as X-API-Key header with requests.`,deleteApiKeyTitle:`Delete API Key`,deleteApiKeyMessage:`Are you sure you want to delete this API key? Any integrations using this key will stop working.`,deleteKey:`Delete Key`,amsDisplayThresholds:`AMS Display Thresholds`,amsThresholdsDescription:`Configure color thresholds for AMS humidity and temperature indicators.`,humidity:`Humidity`,goodGreen:`Good (green)`,fairOrange:`Fair (orange)`,aboveFairBad:`Above fair threshold shows as red (bad)`,fairAlsoDryingThreshold:`This threshold is also used to trigger auto-drying when enabled`,fairBelowDryingFloor:`Auto-drying cannot reach this value: an AMS reads {{floor}}% or more while its heater runs, so every cycle would end and restart immediately. Raise it above {{floor}}% if auto-drying is on.`,temperature:`Temperature`,goodBlue:`Good (blue)`,aboveFairHot:`Above fair threshold shows as red (hot)`,tempAlarmThreshold:`Alarm above`,tempAlarmSeparateFromBand:`Only the alarm threshold sends notifications — Good and Fair colour the display. Leave it empty to alarm at the fair threshold, as before.`,tempAlarmMustBePositive:`A threshold of 0 or less is ignored — the alarm falls back to the fair threshold.`,historyRetention:`History Retention`,keepSensorHistory:`Keep sensor history for`,historyRetentionDescription:`Older humidity and temperature data will be automatically deleted`,defaultPrintOptions:`Default Print Options`,defaultPrintOptionsDescription:`Set default values for print options when starting new prints. These can be overridden per print in the print dialog.`,defaultBedLevelling:`Bed Levelling`,defaultBedLevellingDesc:`Auto-level bed before print`,defaultFlowCali:`Flow Calibration`,defaultFlowCaliDesc:`Calibrate extrusion flow`,defaultVibrationCali:`Vibration Calibration`,defaultVibrationCaliDesc:`Reduce ringing artifacts`,defaultLayerInspect:`First Layer Inspection`,defaultLayerInspectDesc:`AI inspection of first layer`,defaultTimelapse:`Timelapse`,defaultTimelapseDesc:`Record timelapse video`,defaultNozzleOffsetCali:`Nozzle Offset Calibration`,defaultNozzleOffsetCaliDesc:`Calibrate nozzle offsets between extruders`,tempFanPresetsTitle:`Temperature & Fan Presets`,tempFanPresetsDescription:`Customize the quick-select values shown in printer-card temperature and fan-speed popovers. The Off button is always shown.`,tempFanPresetsNozzle:`Nozzle temperature`,tempFanPresetsBed:`Bed temperature`,tempFanPresetsChamber:`Chamber temperature`,tempFanPresetsFan:`Fan speed`,tempFanPresetsReset:`Reset to defaults`,concurrentUploadsTitle:`Concurrent Uploads`,concurrentUploadsDescription:`How many printers the queue may send files to at the same time. Printers receive files slowly (a large print can take several minutes), and each one waits its turn — so on a bigger fleet, raising this is what stops the last printer in a batch from waiting out every transfer before it. Lower it if your network or Bambuddy host struggles with parallel transfers.`,concurrentUploadsLabel:`Printers uploaded to at once`,concurrentUploadsHelp:`1 sends to one printer at a time (the old behaviour). Default is 4.`,staggeredStart:`Staggered Start`,staggeredStartDescription:`Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.`,preheatTitle:`Preheat & Heat Soak`,preheatDescription:`Heat the bed (and chamber, if supported) and hold at temperature before each queued print starts. Helpful for engineering filaments (PA, ABS) on printers without an active chamber heater — the bed warms the chamber by radiation while the soak timer runs. The bed target is read from the print file; chamber behaviour depends on printer model.`,preheatEnabled:`Enable preheat & soak`,preheatEnabledDesc:`When off, queued prints dispatch immediately. Each queue item can override per print.`,preheatFilamentTargetsLabel:`Per-filament chamber target (°C)`,preheatFilamentTargetsHint:`Bambuddy picks the highest target across the loaded AMS slots. A print whose slots all derive 0 — PLA, PETG, TPU, PVA — skips preheat entirely and starts immediately.`,preheatFilamentTargetsReset:`Reset to defaults`,preheatFilamentTargetsDefaultRow:`Other / unmapped`,preheatMaxWait:`Max wait (seconds)`,preheatMaxWaitHelp:`Cap on the chamber warm-up phase before falling through.`,preheatSoak:`Soak (seconds)`,preheatSoakHelp:`Hold time after target reached or max-wait elapsed.`,preheatHardwareTitle:`Per-printer behaviour:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E actively heat the chamber via M141. X1C/P2S read chamber temp but rely on bed-radiation heating. P1S/P1P/A1/A1 Mini have no chamber sensor — only the soak timer applies.`,preheatPerItemDesc:`Heat the bed and chamber before this print starts. Defaults to the global Settings → Workflow toggle.`,preheatOverride_inherit:`Inherit`,preheatOverride_on:`On`,preheatOverride_off:`Off`,calibrationMode_off:`Off`,calibrationMode_on:`On`,calibrationMode_auto:`Auto`,preheatTargetOverride:`Chamber target override (°C, blank = filament default)`,preheatTargetOverrideHelp:`0 heats the bed and runs the soak without the chamber. Leave blank and a print with no chamber requirement skips preheat entirely.`,plateClear:`Plate-Clear Confirmation`,requirePlateClear:`Require plate-clear confirmation`,requirePlateClearDescription:`When enabled, the scheduler waits for per-printer plate-clear confirmation before starting queued prints on printers with finished jobs. Disabling this also hides the plate status badge and the "Mark plate as cleared" button on printer cards.`,keepBedWarm:`Keep bed warm between prints`,keepBedWarmDesc:`While awaiting plate-clear, hold the bed at the keep-warm temperature below so the chamber stays hot — or at the next print's own bed temperature when that is higher. Only applies when the next print needs chamber heating (ASA, ABS, PA, PC etc.). Requires plate-clear confirmation to be enabled.`,keepWarmBedTemp:`Keep-warm bed temperature (°C)`,keepWarmBedTempHelp:`Used whenever the bed's job is to heat the chamber — the keep-warm hold, and preheat when the print file carries no bed temperature. A higher bed temperature from the print file always wins.`,keepWarmMaxMinutes:`Stop keeping warm after (minutes)`,keepWarmMaxMinutesHelp:`If the plate is not cleared within this time, the heaters are switched off rather than held indefinitely.`,gcodeInjection:`G-code Injection`,gcodeInjectionDescription:`Configure custom G-code to inject at the start and/or end of prints for auto-print systems like Farmloop, SwapMod, AutoClear, and Printflow 3D. Snippets are configured per printer model and applied when "Inject G-code" is enabled on a queue item.`,gcodeInjectionNoPrinters:`No printers found. Add printers to configure G-code snippets.`,gcodeStartLabel:`Start G-code`,gcodeEndLabel:`End G-code`,gcodeStartPlaceholder:`G-code prepended before the print starts...`,gcodeEndPlaceholder:`G-code appended after the print ends...`,staggerGroupSize:`Group size`,staggerGroupSizeHelp:`Printers to start simultaneously per group`,staggerInterval:`Interval (minutes)`,staggerIntervalHelp:`Delay between each group starting`,queueDrying:`Queue Auto-Drying`,queueDryingDescription:`Automatically dry AMS filament when printer is idle between queued prints. Uses humidity threshold above to trigger drying.`,queueDryingEnabled:`Enable auto-drying`,queueDryingEnabledDescription:`Start AMS drying automatically when printer is idle and humidity is above threshold`,queueDryingBlock:`Wait for drying to complete`,queueDryingBlockDescription:`Block the print queue until drying finishes. When off, prints take priority over drying.`,ambientDryingEnabled:`Ambient drying`,ambientDryingEnabledDescription:`Automatically dry filament on idle printers when humidity exceeds threshold, even without queued prints.`,printDryingEnabled:`Continue drying while printing`,printDryingEnabledDescription:`Allow auto-drying to keep running during a print on supported hardware (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L on recent firmware). Drying temperature is automatically capped 5°C below the idle preset to protect spools.`,dryingPresets:`Drying Presets`,dryingPresetsDescription:`Temperature and duration per filament type. AMS 2 Pro uses lower temps, AMS-HT supports higher temps.`,dryingFilament:`Filament`,humidityThresholds:`Humidity Thresholds`,humidityThresholdsDescription:`Per-filament humidity trigger for auto-drying and alarms. Mixed loads in one AMS use the lowest threshold.`,humidityThresholdCol:`Threshold`,humidityThresholdDefault:`Default (unknown types)`,printModal:`Print Modal`,expandCustomMapping:`Expand custom mapping by default`,expandCustomMappingDescription:`When printing to multiple printers, show per-printer AMS mapping expanded`,authentication:`Authentication`,authEnabledDescription:`Your instance is secured with user authentication`,authDisabledDescription:`Enable to require login and manage user access`,authDisabledMessage:`Enable authentication to create user accounts, manage permissions, and secure your Bambuddy instance.`,enableAuthentication:`Enable Authentication`,currentUser:`Current User`,changePassword:`Change Password`,admin:`Admin`,users:`Users`,addUser:`Add User`,groups:`Groups`,addGroup:`Add Group`,system:`System`,noDescription:`No description`,userCount:`{{count}} users`,permissionCount:`{{count}} permissions`,createUser:`Create User`,username:`Username`,enterUsername:`Enter username`,password:`Password`,enterPassword:`Enter password`,passwordRequirements:`At least 8 characters, with one uppercase, one lowercase, one digit, and one special character.`,confirmPassword:`Confirm Password`,confirmPasswordPlaceholder:`Confirm password`,viewReleaseOnGitHub:`View release on GitHub`,turnAllPlugsOn:`Turn all plugs on`,turnAllPlugsOff:`Turn all plugs off`,clearNotificationLogs:`Clear Notification Logs`,clearLogsMessage:`This will permanently delete all notification logs older than 30 days. This action cannot be undone.`,clearLogs:`Clear Logs`,resetUiPreferences:`Reset UI Preferences`,resetUiPreferencesMessage:`This will reset all UI preferences to defaults: sidebar order, theme, dashboard layout, view modes, and sorting preferences. Your printers, archives, and server settings will NOT be affected. The page will reload after clearing.`,resetPreferences:`Reset Preferences`,deleteGroupTitle:`Delete Group`,deleteGroupMessage:`Are you sure you want to delete this group? Users in this group will lose these permissions.`,deleteGroup:`Delete Group`,disableAuthenticationTitle:`Disable Authentication`,disableAuthenticationMessage:`Are you sure you want to disable authentication? This will make your Bambuddy instance accessible without login. All users will remain in the database but authentication will be disabled.`,disableAuthentication:`Disable Authentication`,configureBambuddy:`Configure Bambuddy`,systemDefault:`System Default`,archiveSettings:`Archive Settings`,newWindow:`New Window`,embeddedOverlay:`Embedded Overlay`,preferredSlicer:`Preferred Slicer`,preferredSlicerDescription:`Slicer used for in-app slicing via the API sidecar`,openInSlicerLabel:`Open in Slicer`,openInSlicerInherit:`Same as API slicer`,openInSlicerDescription:`Desktop slicer used by the 'Open in Slicer' button. Leave on 'Same as API slicer' to inherit, or pick a different slicer to use locally.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.`,useSlicerApi:`Use Slicer API`,useSlicerApiDescription:`When on, "Slice" actions open the in-app slicer modal and call the slicer-API sidecar. When off (default), they hand off to the desktop slicer via URI scheme.`,slicerCard:`Slicer`,orcaslicerApiUrl:`OrcaSlicer sidecar URL`,bambuStudioApiUrl:`Bambu Studio sidecar URL`,slicerStallTimeout:`Slicer stall timeout (minutes)`,slicerStallTimeoutDescription:`Give up on a slice after this long with no progress from the sidecar. Heavy models that keep reporting progress are never cut off, however long they take. Sidecars that do not report progress use this as a total time limit instead.`,slicerApiUrlDescription:`URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.`,externalCameras:`External Cameras`,costTracking:`Cost Tracking`,billingEnabled:`Enable Billing`,billingEnabledDescription:`Charge users for prints and enable finance features`,printerKillSwitch:`Unauthorized print kill switch`,printerKillSwitchDescription:`Immediately stop prints that start without authorization.`,financeBudgetReset:`Finance Monthly Budget Reset`,financeBudgetResetDay:`Reset Day`,financeBudgetResetDayHelp:`For short months, reset uses the last day of the month.`,financeBudgetResetTimezone:`Reset timezone`,financeBudgetResetTimezoneHelp:`Budget window start is calculated in this timezone.")`,rebuildLedger:`Rebuild wallet ledger`,rebuildLedgerStarted:`Ledger rebuild started`,rebuildLedgerConfirmTitle:`Rebuild wallet ledger?`,rebuildLedgerConfirmMessage:`This will rebuild the wallet ledger to repair historical balance values. Run this only if you know what you are doing.`,rebuildLedgerInProgress:`Starting rebuild...`,printsOnly:`Prints Only`,totalConsumption:`Total Consumption`,dataManagement:`Data Management`,storageUsage:`Storage Usage`,storageUsageDescription:`Breakdown of data usage by category`,storageUsageTotal:`Total`,storageUsageErrors:`Errors`,storageUsageOtherBreakdown:`Other (includes static assets, scripts, and configuration files)`,storageUsageSystem:`System`,storageUsageData:`Data`,storageUsageUnavailable:`Storage usage information unavailable`,clearNotificationLogsDescription:`Delete notification logs older than 30 days`,resetUiPreferencesDescription:`Reset sidebar order, theme, view modes, and layout preferences. Printers, archives, and settings are not affected.`,enableHomeAssistant:`Enable Home Assistant`,enableMqtt:`Enable MQTT`,useTls:`Use TLS`,enableMetricsEndpoint:`Enable Metrics Endpoint`,availableMetrics:`Available Metrics`,editUser:`Edit User`,deleteUserTitle:`Delete User`,groupName:`Group Name`,leaveEmptyForAnonymous:`Leave empty for anonymous`,leaveEmptyForNoAuth:`Leave empty for no authentication`,enterNewPassword:`Enter new password`,confirmNewPassword:`Confirm new password`,enterGroupName:`Enter group name`,enterDescriptionOptional:`Enter description (optional)`,enterCurrentPassword:`Enter current password`,enterNewPasswordMin6:`Enter new password (min 6 characters)`,toast:{keyCopied:`Key copied to clipboard`,copyFailed:`Failed to copy key`,keyAddedToBrowser:`Key added to API Browser`,clearLogsFailed:`Failed to clear logs`,uiPreferencesReset:`UI preferences reset. Refreshing...`,authDisabled:`Authentication disabled successfully`,authDisableFailed:`Failed to disable authentication`,apiKeyCreated:`API key created`,apiKeyDeleted:`API key deleted`,userCreated:`User created successfully`,userUpdated:`User updated successfully`,userDeleted:`User deleted successfully`,groupCreated:`Group created successfully`,groupUpdated:`Group updated successfully`,groupDeleted:`Group deleted successfully`,fillRequiredFields:`Please fill in all required fields`,passwordsDoNotMatch:`Passwords do not match`,passwordTooShort:`Password must be at least 8 characters`,passwordNeedsUppercase:`Password must contain at least one uppercase letter`,passwordNeedsLowercase:`Password must contain at least one lowercase letter`,passwordNeedsDigit:`Password must contain at least one digit`,passwordNeedsSpecial:`Password must contain at least one special character`,enterGroupName:`Please enter a group name`,settingsSaved:`Settings saved`,noPermissionUpdate:`You do not have permission to change settings`,cameraSettingsSaved:`Camera settings saved`,enterCameraUrl:`Please enter a camera URL`,passwordChanged:`Password changed successfully`,connectionFailed:`Connection failed`,testFailed:`Test failed`,cameraConnected:`Camera connected{{resolution}}`,cameraConnectedCoalesced:`Camera connected{{resolution}} (shared with a capture already running)`},testConnection:`Test Connection`,catalog:{spoolCatalog:`Spool Catalog`,spoolCatalogDescription:`Empty spool weights by brand/type. Used for automatic weight lookup when adding spools.`,searchCatalog:`Search catalog...`,addNewEntry:`Add New Entry`,namePlaceholder:`Name (e.g., Bambu Lab - Plastic)`,weight:`Weight`,type:`Type`,default:`Default`,custom:`Custom`,noMatch:`No entries match your search`,empty:`No entries in catalog`,deleteEntry:`Delete Entry`,deleteConfirm:`Are you sure you want to delete "{{name}}"?`,resetCatalog:`Reset Catalog`,resetConfirm:`Reset catalog to defaults? This will remove all custom entries.`,loadFailed:`Failed to load spool catalog`,nameWeightRequired:`Name and weight are required`,entryAdded:`Entry added`,addFailed:`Failed to add entry`,entryUpdated:`Entry updated`,updateFailed:`Failed to update entry`,entryDeleted:`Entry deleted`,deleteFailed:`Failed to delete entry`,resetSuccess:`Catalog reset to defaults`,resetFailed:`Failed to reset catalog`,exported:`Exported {{count}} entries`,imported:`Imported {{added}} entries ({{skipped}} skipped)`,importFailed:`Failed to import: invalid JSON format`,exportTooltip:`Export catalog to JSON`,importTooltip:`Import catalog from JSON`,resetTooltip:`Reset to defaults`,selectedCount:`{{count}} selected`,deleteSelected:`Delete Selected`,bulkDeleteConfirm:`Are you sure you want to delete {{count}} entries?`,bulkDeleted:`Deleted {{count}} entries`,bulkDeleteFailed:`Failed to delete entries`,material:`Material`,spoolWeight:`Spool Weight`,color:`Color`,updateSpoolWeight:`Update Spool Weight`,filamentUpdated:`Filament updated`,filamentUpdateFailed:`Failed to update filament`,filamentUpdateInvalid:`Invalid filament data`,keepExistingSpoolWeight:`Keep old weight for existing spools`,keepExistingSpoolWeightDesc:`Spools already created with this filament type retain the old tare weight. New spools use the updated value.`,applyToAllSpools:`Apply to all spools`,applyToAllSpoolsDesc:`All weight calculations for this filament type immediately use the new tare weight.`},colorCatalog:{title:`Color Catalog`,description:`Filament colors by manufacturer/material. Used for automatic color lookup when adding spools.`,searchColors:`Search colors...`,allManufacturers:`All manufacturers`,addNewColor:`Add New Color`,manufacturer:`Manufacturer`,colorName:`Color Name`,hex:`Hex`,materialOptional:`Material (optional)`,showing:`Showing {{filtered}} of {{total}} colors`,noMatch:`No colors match your search`,empty:`No colors in catalog`,deleteColor:`Delete Color`,deleteConfirm:`Are you sure you want to delete "{{name}}"?`,resetCatalog:`Reset Color Catalog`,resetConfirm:`Reset catalog to defaults? This will remove all custom colors.`,sync:`Sync`,starting:`Starting...`,syncTooltip:`Sync from FilamentColors.xyz (2000+ colors, may take a minute)`,loadFailed:`Failed to load color catalog`,fieldsRequired:`Manufacturer, color name, and hex color are required`,colorAdded:`Color added`,addFailed:`Failed to add color`,colorUpdated:`Color updated`,updateFailed:`Failed to update color`,colorDeleted:`Color deleted`,deleteFailed:`Failed to delete color`,resetSuccess:`Color catalog reset to defaults`,resetFailed:`Failed to reset catalog`,syncUpToDate:`Already up to date ({{count}} colors checked)`,syncComplete:`Added {{added}} new colors ({{skipped}} already existed)`,syncError:`Sync error`,syncFailed:`Failed to sync from FilamentColors.xyz`,exported:`Exported {{count}} colors`,imported:`Imported {{added}} colors ({{skipped}} skipped)`,importFailed:`Failed to import: invalid JSON format`,selectedCount:`{{count}} selected`,deleteSelected:`Delete Selected`,bulkDeleteConfirm:`Are you sure you want to delete {{count}} colors?`,bulkDeleted:`Deleted {{count}} colors`,bulkDeleteFailed:`Failed to delete colors`},dateFormat:`Date Format`,dateFormatUs:`US (MM/DD/YYYY)`,dateFormatEu:`EU (DD/MM/YYYY)`,dateFormatIso:`ISO (YYYY-MM-DD)`,timeFormat:`Time Format`,timeFormat12:`12-hour (3:30 PM)`,timeFormat24:`24-hour (15:30)`,defaultPrinter:`Default Printer`,defaultPrinterDescription:`Pre-select this printer for uploads, reprints, and other operations.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Use Sidebar to reorder items, reset visibility, and manage custom links.`,setDefault:`Set Default`,sidebarOrderSetDefaultHint:`Set default applies the current menu order to users who haven't customized theirs.`,sidebarDefaultSet:`Default menu order has been set.`,sidebarDefaultCleared:`Default menu order cleared.`,sidebarDefaultFailed:`Failed to set default menu order.`,reset:`Reset`,darkMode:`Dark Mode`,lightMode:`Light Mode`,active:`(active)`,background:`Background`,accent:`Accent`,style:`Style`,bgNeutral:`Neutral`,bgWarm:`Warm`,bgCool:`Cool`,bgOled:`OLED Black`,bgSlate:`Slate Blue`,bgForest:`Forest Green`,accentGreen:`Green`,accentTeal:`Teal`,accentBlue:`Blue`,accentOrange:`Orange`,accentPurple:`Purple`,accentRed:`Red`,styleClassic:`Classic`,styleGlow:`Glow`,styleVibrant:`Vibrant`,themeToggleHint:`Toggle between dark, light, and system mode using the icon in the sidebar.`,progressInTitle:`Print progress in tab`,progressInTitleDescription:`Show the active print's percentage and a progress ring in the browser tab.`,autoArchivePrints:`Auto-archive prints`,autoArchiveDescription:`Automatically save 3MF files when prints complete`,saveThumbnailsDescription:`Extract and save preview images from 3MF files`,captureFinishPhotoDescription:`Take a photo from printer camera when print completes. Bambuddy records a brief timelapse during the print so the photo can be sourced from the moment before the bed drops; the timelapse file is kept if you enabled timelapse for this print, otherwise it is deleted automatically after the photo is captured.`,finishPhotoRestorePlate:`Restore plate for finish photo`,finishPhotoRestorePlateDescription:`The printer drops the build plate about 100 mm when a print ends, leaving the finished print below the camera's framing. Bambuddy raises it back to just above the last printed layer, takes the photo, then lowers it again. Skipped when the print height is unknown or another job is queued.`,ffmpegNotInstalled:`ffmpeg not installed`,ffmpegRequired:`Camera capture requires ffmpeg. Install it via <brew>brew install ffmpeg</brew> (macOS) or <apt>apt install ffmpeg</apt> (Linux).`,camera:`Camera`,cameraViewMode:`Camera View Mode`,cameraOverlayDescription:`Camera opens in a resizable overlay on the main screen`,cameraWindowDescription:`Camera opens in a separate browser window`,externalCamerasDescription:`Configure external cameras to replace the built-in printer camera. Supports MJPEG streams, RTSP, HTTP snapshots, and USB cameras (V4L2). When enabled, the external camera is used for live view and finish photos.`,cameraPlaceholderUsb:`Device path (/dev/video0)`,cameraPlaceholderUrl:`Camera URL (rtsp://... or http://...)`,cameraTypeMjpeg:`MJPEG Stream`,cameraTypeRtsp:`RTSP Stream`,cameraTypeSnapshot:`HTTP Snapshot`,cameraTypeUsb:`USB Camera (V4L2)`,cameraSnapshotUrl:`Snapshot URL (optional)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`Single-frame URL used for notification thumbnails, finish photos, layer-timelapse frames, and plate detection. Timelapse and plate detection each require their own per-printer toggle — this URL is just the image source they pull from when active. Leave blank to capture from the live stream above. Useful for go2rtc (/api/frame.jpeg) and IP cameras with a dedicated snapshot endpoint.`,cameraRotation:`Rotation`,test:`Test`,connected:`Connected`,disconnected:`Disconnected`,currency:`Currency`,defaultFilamentCost:`Default filament cost (per kg)`,electricityCost:`Electricity cost per kWh`,energyDisplayMode:`Energy display mode`,energyModePrintDescription:`Dashboard shows sum of energy used during prints`,energyModeTotalDescription:`Dashboard shows lifetime energy from smart plugs`,fileManager:`File Manager`,createArchiveEntry:`Create Archive Entry When Printing`,createArchiveEntryDescription:`When printing from File Manager, optionally create an archive entry`,lowDiskSpaceWarning:`Low Disk Space Warning`,lowDiskSpaceDescription:`Show warning when free disk space falls below this threshold`,printerFirmware:`Printer Firmware`,checkFirmwareDescription:`Check for printer firmware updates from Bambu Lab`,bambuddySoftware:`Bambuddy Software`,autoCheckDescription:`Automatically check for new versions on startup`,checkNow:`Check now`,updateAvailableVersion:`Update available: v{{version}}`,releaseNotes:`Release Notes`,updateViaDocker:`Update via Docker Compose:`,composeDirectory:`Compose directory`,composeDirectoryHint:`Directory containing your docker-compose.yml. Leave blank to omit the cd.`,copyUpdateCommand:`Copy update command`,updateViaHomeAssistant:`Updates are managed by the Home Assistant Supervisor. Open Settings → Add-ons → Bambuddy in Home Assistant to install the new version.`,updateViaWindowsInstaller:`Windows installations are updated by re-running the installer. Download the new version below — your data, settings and printers are preserved.`,downloadWindowsInstaller:`Download installer for v{{version}}`,installUpdate:`Install Update`,latestVersionRunning:`You're running the latest version`,failedToCheckUpdates:`Failed to check for updates: {{error}}`,backupRestore:`Backup & Restore`,backupRestoreDescription:`Export/import settings and configure GitHub backup`,goToBackup:`Go to Backup`,externalUrl:`External URL`,externalUrlDescription:`The external URL where Bambuddy is accessible. Used for notification images and external integrations.`,bambuddyUrl:`Bambuddy URL`,externalUrlHint:`Include protocol and port (e.g., http://192.168.1.100:8000)`,ftpRetry:`FTP Retry`,ftpRetryDescription:`Retry FTP operations when printer WiFi is unreliable. Applies to 3MF downloads, print uploads, timelapse downloads, and firmware updates.`,autoRetryDescription:`Automatically retry failed FTP operations`,retryAttempts:`Retry attempts`,retryDelay:`Retry delay`,connectionTimeout:`Connection timeout`,time_one:`{{count}} time`,time_other:`{{count}} times`,second_one:`{{count}} second`,second_other:`{{count}} seconds`,nSeconds:`{{count}} seconds`,increaseForWeakWifi:`Increase for printers with weak WiFi`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Connect to Home Assistant to control smart plugs via HA's REST API. Supports switch, light, input_boolean, and script entities.`,homeAssistantUrl:`Home Assistant URL`,longLivedAccessToken:`Long-Lived Access Token`,haTokenHint:`Create a token in HA: Profile → Long-Lived Access Tokens → Create Token`,connectionSuccessful:`Connection Successful`,connectionFailed:`Connection Failed`,haConnectionSuccess:`Successfully connected to Home Assistant.`,haConnectionFailed:`Failed to connect to Home Assistant.`,mqttPublishing:`MQTT Publishing`,mqttDescription:`Publish BamBuddy events to an external MQTT broker for integration with Node-RED, Home Assistant, and other automation systems.`,mqttEnableDescription:`Publish events to external MQTT broker`,brokerHostname:`Broker hostname`,port:`Port`,usernameOptional:`Username (optional)`,passwordOptional:`Password (optional)`,topicPrefix:`Topic prefix`,topicPrefixHint:`Topics will be: {{prefix}}/printers/<serial>/status, etc.`,prometheusMetrics:`Prometheus Metrics`,prometheusEndpointDescription:`Expose printer metrics at <code>/api/v1/metrics</code> for Prometheus/Grafana monitoring.`,bearerTokenOptional:`Bearer Token (optional)`,bearerTokenHint:`If set, requests must include <code>Authorization: Bearer <token></code>`,metricsConnectionStatus:`Connection status`,metricsPrinterState:`Printer state (idle/printing/etc)`,metricsPrintProgress:`Print progress 0-100%`,metricsBedTemp:`Bed temperature`,metricsNozzleTemp:`Nozzle temperature`,metricsPrintsTotal:`Total prints by result`,metricsMore:`...and more (layers, fans, queue, filament usage)`,smartPlugsDescription:`Connect smart plugs (Tasmota or Home Assistant) to automate power control and track energy usage for your printers.`,allOn:`All On`,allOff:`All Off`,addSmartPlug:`Add Smart Plug`,energySummary:`Energy Summary`,currentPower:`Current Power`,plugsOnline:`{{reachable}}/{{total}} plugs online`,today:`Today`,yesterday:`Yesterday`,total:`Total`,enablePlugsForSummary:`Enable plugs to see energy summary`,addNotificationProvider:`Add`,systemBadge:`(System)`,creating:`Creating...`,changing:`Changing...`,deleteUserAndItems:`Delete user AND their items`,deleteUserKeepItems:`Delete user, keep items (become ownerless)`,ok:`OK`,twoFa:{totpTitle:`Authenticator App (TOTP)`,totpDesc:`Use an authenticator app like Google Authenticator, Aegis or Authy.`,emailOtpTitle:`Email OTP`,emailOtpDesc:`Send a one-time code to {{email}} when you log in.`,emailOtpNoEmail:`Add an email address to your account to enable this method.`,addEmailFirst:`Your account has no email address. Ask an admin to add one before enabling Email OTP.`,setupTotp:`Set up Authenticator App`,setupAuthApp:`Set up Authenticator App`,setupInstructions:`Scan the QR code below with your authenticator app, then confirm with a code.`,manualEntry:`Can't scan? Enter this secret manually:`,scannedContinue:`I've scanned the code — continue`,enterCodeToConfirm:`Enter the 6-digit code from your authenticator app to confirm setup.`,activate:`Activate`,disableTotp:`Disable Authenticator`,disableConfirmHint:`Enter a valid TOTP code or a backup code to disable the authenticator.`,totpDisabled:`Authenticator app disabled.`,emailOtpEnabled:`Email OTP enabled.`,emailOtpDisabled:`Email OTP disabled.`,smtpRequired:`Please configure and test SMTP settings first.`,invalidCode:`Invalid code. Please try again.`,enableEmailOtp:`Enable Email OTP`,disableEmailOtp:`Disable Email OTP`,emailSetupEnterCode:`A verification code has been sent to your email address. Enter it below to confirm you own this inbox.`,verifyAndEnable:`Verify & Enable`,emailDisablePasswordHint:`Enter your account password to confirm disabling email OTP.`,passwordPlaceholder:`Enter your password`,backupCodesTitle:`Save your backup codes`,backupCodesWarning:`Save these codes somewhere safe. Each code can only be used once and they will not be shown again.`,backupCodesRemaining:`{{count}} backup codes remaining`,savedCodes:`I've saved my codes`,regenBackup:`Regenerate Backup Codes`,regenBackupHint:`Enter your current TOTP code to generate 10 new backup codes. All existing backup codes will be invalidated.`,newBackupCodes:`New backup codes`,linkedAccounts:`Linked SSO Accounts`,linkedAccountsDesc:`These external identity providers are linked to your account.`,oidcUnlinked:`Account unlinked.`},sessionPolicy:{title:`Session Policy`,description:`Maximum session lifetime for new user logins. Already-issued tokens keep their original expiry.`,preset24h:`24 hours`,preset7d:`7 days`,preset30d:`30 days`,customHoursLabel:`Custom session lifetime in hours`,hoursSuffix:`hours`,warning:`Longer sessions reduce automatic logout protection. Recommended only for trusted single-user deployments.`},oidc:{title:`SSO / OIDC Providers`,desc:`Configure OpenID Connect providers to allow single sign-on via external identity providers.`,addProvider:`Add Provider`,newProvider:`New Provider`,empty:`No OIDC providers configured yet.`,created:`Provider created.`,updated:`Provider updated.`,deleted:`Provider deleted.`,refreshIcon:`Refresh icon`,removeIcon:`Remove icon`,iconRefreshed:`Icon refreshed.`,iconRemoved:`Icon removed.`,iconFetchFailed:`Icon could not be fetched from the provider URL.`,deleteTitle:`Delete Provider`,deleteMessage:`Delete "{{name}}"? All linked user accounts will be disconnected.`,form:{name:`Display Name`,issuerUrl:`Issuer URL`,clientId:`Client ID`,clientSecret:`Client Secret`,scopes:`Scopes`,iconUrl:`Icon URL (optional)`,enabled:`Enabled`,autoCreate:`Auto-create users`,autoCreateDesc:`Automatically create a local account on first login.`,autoLink:`Auto-link existing accounts`,autoLinkDesc:`Link existing local accounts by matching email on first login.`,secretHint:`leave blank to keep current`,secretPlaceholder:`new secret`,emailClaim:`Email Claim`,emailClaimDesc:`JWT claim used as email identity. Use 'preferred_username' or 'upn' for Azure Entra ID (which does not send email_verified). Only use trusted claim names.`,emailClaimPlaceholder:`email`,emailClaimCustomClaimAutoLinkWarning:`Custom claims are safe for auto-link only when the value is tenant-administered (e.g. Azure Entra ID upn / preferred_username). Do not enable auto-link if your IdP allows users to self-assert this claim.`,requireEmailVerified:`Require email verified`,requireEmailVerifiedDesc:`Only accept the email claim when the provider marks it as verified.`,requireEmailVerifiedWarning:`Warning: email will be accepted even without verification. Use only with trusted providers.`,requireEmailVerifiedAutoLink:`Disable auto-link first to change this setting.`,defaultGroup:`Default Group`,defaultGroupDesc:`Group assigned to auto-created users. Falls back to Viewers if not set.`,defaultGroupViewersFallback:`Viewers (default)`,autologin:`Autologin`,autologinDesc:`Redirect unauthenticated visitors straight to this provider. Only one provider can carry this flag.`}},encryption:{title:`MFA Encryption Status`,enabledFromEnv:`At-rest encryption enabled (key from MFA_ENCRYPTION_KEY environment variable)`,enabledFromFile:`At-rest encryption enabled (key loaded from data directory)`,enabledGenerated:`At-rest encryption enabled with auto-generated key`,notConfigured:`At-rest encryption not configured`,notConfiguredDesc:`TOTP secrets and OIDC client_secrets are stored in plaintext. Set MFA_ENCRYPTION_KEY or restart Bambuddy with a writable data directory to auto-generate one.`,allEncrypted:`All MFA secrets are encrypted at rest.`,legacyRowsLabel:`Legacy plaintext rows`,encryptedRowsLabel:`Encrypted rows`,legacyRowsWarning:`{{count}} legacy plaintext row(s) detected. Re-save the OIDC provider or re-enroll the user’s authenticator app to migrate to encrypted storage.`,backupHint:`The auto-generated key is stored at DATA_DIR/.mfa_encryption_key and is included in local backup ZIPs. Keep your backups secure or set MFA_ENCRYPTION_KEY explicitly.`,decryptionBrokenTitle:`Encryption key missing`,decryptionBrokenError:`{{count}} encrypted record(s) cannot be decrypted because the encryption key is no longer available. Restore the previous MFA_ENCRYPTION_KEY or DATA_DIR/.mfa_encryption_key to recover.`,migrationErrorWarning:`{{count}} legacy row(s) failed to re-encrypt at startup. Check server logs and restart Bambuddy to retry.`},pipelineLimits:{title:`Slicer Pipeline limits`,maxCopiesLabel:`Max copies per run`,maxCopiesDesc:`Upper bound on the copies operators can request when running a pipeline. Server-side hard cap is 1000.`},pipelines:{title:`Slicer Pipelines`,subtitle:`Reusable preset bundles (printer + process + filaments + bed type). Save one from the Slice dialog and apply it with a single click on the next file.`,loading:`Loading pipelines…`,loadError:`Could not load pipelines.`,confirmDelete:`Delete this pipeline? This cannot be undone.`,staleWarning:`One or more referenced presets no longer exist. Re-save this pipeline from the Slice dialog to fix.`,empty:{title:`No pipelines yet.`,howto:`Open the Slice dialog for any file, pick your printer / process / filaments / bed type, then click "Save as pipeline". Your saved pipelines will appear here.`},field:{name:`Pipeline name`,description:`Description`,targetPrinter:`Target printer`,noTarget:`— No target —`,targetKind:`Target type`,targetKindSpecific:`Specific printer`,targetKindClass:`Printer class`,targetModelClass:`Printer model`,fanoutStrategy:`Fanout strategy`,fanout:{max_parallel:`Max parallel — distribute across any idle matching printer`,round_robin:`Round robin — cycle through eligible printers`,fill_one_first:`Fill one first — pin all copies to one printer`},fanoutShort:{max_parallel:`parallel`,round_robin:`round robin`,fill_one_first:`fill one first`}},action:{save:`Save`,cancel:`Cancel`,rename:`Rename`,delete:`Delete`},slot:{printer:`Printer`,process:`Process`,filament:`Filament`,filamentN:`Filament {{n}}`,filamentAll:`All {{n}} slots`,bed:`Bed`},group:{profiles:`Profiles`,filaments:`Filaments`},searchPlaceholder:`Search pipelines…`,filterTargetType:`Filter by target type`,filterTarget:`Filter by target`,filter:{all:`All targets`,noTarget:`No target set`,count:`{{shown}} / {{total}}`,noMatches:`No pipelines match the current filters.`},toast:{saved:`Pipeline saved`,saveFailed:`Save failed`,deleted:`Pipeline deleted`,deleteFailed:`Delete failed`},noTargetHint:`Set a target printer to run this`,noTargetWarning:`Set a target printer before running this pipeline.`,runs:{lastRun:`Last run`,status:{queued:`queued`,slicing:`slicing`,dispatching:`dispatching`,in_progress:`printing`,completed:`completed`,failed:`failed`,partial_failure:`partial failure`,cancelled:`cancelled`}}}},notification:{printStarted:{title:`Print Started`,body:`{{printer}}: {{filename}} has started printing`},printCompleted:{title:`Print Completed`,body:`{{printer}}: {{filename}} completed successfully`},printFailed:{title:`Print Failed`,body:`{{printer}}: {{filename}} has failed`},printStopped:{title:`Print Stopped`,body:`{{printer}}: {{filename}} was stopped`},printProgress:{title:`Print Progress`,body:`{{printer}}: {{filename}} is {{percent}}% complete`},printerOffline:{title:`Printer Offline`,body:`{{printer}} is offline`},printerError:{title:`Printer Error`,body:`{{printer}}: {{error}}`},filamentLow:{title:`Low Filament`,body:`{{printer}}: Filament is running low`},maintenanceDue:{title:`Maintenance Due`,body:`{{printer}}: {{items}} need attention`}},errors:{generic:`Something went wrong`,networkError:`Network error. Please check your connection.`,notFound:`Not found`,unauthorized:`Unauthorized`,serverError:`Server error`,validationError:`Please check your input`,printerConnectionFailed:`Failed to connect to printer`,saveFailed:`Failed to save changes`,deleteFailed:`Failed to delete`,loadFailed:`Failed to load data`},hmsErrors:{title:`Errors - {{name}}`,noErrors:`No errors`,viewOnWiki:`View on Bambu Lab Wiki`,mqttVerifyFailedRemedy:`Enable Developer Mode on the printer, restart the printer, then start the job again.`,unknownCode:`Unknown HMS code — see the Bambu Lab wiki for details.`,clearInstructions:`Clear errors on the printer to dismiss them here.`,clearErrors:`Clear Errors`,clearSuccess:`HMS errors cleared`,clearFailed:`Failed to clear HMS errors`,actionSuccess:`Action sent to printer`,actionFailed:`Failed to send action`,runoutExpectedSlot:`Filament ran out in {{ranOut}}. The printer is now waiting for compatible filament in {{expected}}. Insert a spool into {{expected}}, then select Retry.`,runoutExpectedSlotOnly:`The printer is waiting for compatible filament in {{expected}}. Insert a spool there, then select Retry.`,runoutSlotUnknown:`Filament ran out and the print is paused. Bambuddy could not determine which slot the printer now expects — check the printer screen for the requested slot.`,actions:{RESUME_PRINTING:`Resume Printing`,RESUME_PRINTING_DEFECTS:`Resume (defects acceptable)`,RESUME_PRINTING_PROBELM_SOLVED:`Resume (problem solved)`,STOP_PRINTING:`Stop Printing`,CHECK_ASSISTANT:`Check Assistant`,FILAMENT_EXTRUDED:`Filament Extruded, Continue`,RETRY_FILAMENT_EXTRUDED:`Not Extruded Yet, Retry`,CONTINUE:`Finished, Continue`,LOAD_VIRTUAL_TRAY:`Load Filament`,OK_BUTTON:`OK`,FILAMENT_LOAD_RESUME:`Filament Loaded, Resume`,JUMP_TO_LIVEVIEW:`View Liveview`,NO_REMINDER_NEXT_TIME:`No Reminder Next Time`,REFRESH_NOZZLE:`Recheck`,IGNORE_NO_REMINDER_NEXT_TIME:`Ignore. Don't Remind Next Time`,IGNORE_RESUME:`Ignore this and Resume`,PROBLEM_SOLVED_RESUME:`Problem Solved and Resume`,TURN_OFF_FIRE_ALARM:`Got it, Turn off the Fire Alarm.`,RETRY_PROBLEM_SOLVED:`Retry (problem solved)`,CANCLE:`Cancle`,STOP_DRYING:`Stop Drying`,PROCEED:`Proceed`,OK_JUMP_RACK:`OK`,ABORT:`Abort`,DISABLE_PURIFICATION:`Disable Purification for This Print`,DONT_REMIND_NEXT_TIME:`Don't Remind Me`,DBL_CHECK_CANCEL:`Cancel`,DBL_CHECK_DONE:`Done`,DBL_CHECK_RETRY:`Retry`,DBL_CHECK_RESUME:`Resume`,DBL_CHECK_OK:`Confirm`,REMOVE_CLOSE_BTN:`Close`}},mqttDebug:{title:`MQTT Debug Log`,searchPlaceholder:`Search topic or payload...`,noMessages:`No messages logged yet`,startLoggingHint:`Click "Start Logging" to begin capturing MQTT messages`,noMessagesMatch:`No messages match your filter`,adjustFilterHint:`Try adjusting your search or filter criteria`,incoming:`Incoming`,outgoing:`Outgoing`,loggingStopped:`Logging stopped`,loggingActive:`Logging active - messages will auto-refresh`,startLogging:`Start Logging`,stopLogging:`Stop Logging`,clearLog:`Clear Log`,topic:`Topic`,timestamp:`Timestamp`,direction:`Direction`,all:`All`},printerFiles:{zipStarted_one:`Started ZIP download for {{count}} file`,zipStarted_other:`Started ZIP download for {{count}} files`,zipPartial:`ZIP download started with {{successful}} of {{total}} files; the rest could not be retrieved`,downloadFailed:`Download failed: {{error}}`,unknownError:`Unknown error`,shiftSelectHint:`Shift-click to select a range`,selectFile:`Select {{name}}`,deselectFile:`Deselect {{name}}`,title:`File Manager`,storageUsed:`Used:`,storageFree:`Free:`,filterPlaceholder:`Filter files...`,deleteButton:`Delete`,deleteFiles:`Delete {{count}} Files`,deleteFileConfirm:`Delete "{{name}}"? This cannot be undone.`,deleteFilesConfirm:`Delete {{count}} selected files? This cannot be undone.`,noFiles:`No files on printer`,printerUnavailable:`The printer file service is unavailable. Try again when the printer is reachable.`,loadingFiles:`Loading files...`,failedToLoad:`Failed to load files`,toast:{filesDeleted:`Deleted {{count}} file(s)`,deleteFailed:`Delete failed: {{error}}`}},confirm:{delete:`Are you sure you want to delete this?`,unsavedChanges:`You have unsaved changes. Are you sure you want to leave?`,clearQueue:`Are you sure you want to clear the queue?`},login:{title:`Bambuddy Login`,subtitle:`Sign in to your account`,username:`Username`,usernamePlaceholder:`Enter your username`,usernameOrEmail:`Username or Email`,usernameOrEmailPlaceholder:`Username or @ Email`,password:`Password`,passwordPlaceholder:`Enter your password`,signIn:`Sign in`,signingIn:`Logging in...`,rememberMe:`Remember Me`,forgotPassword:`Forgot your password?`,autologinFailed:`Automatic SSO sign-in failed. Pick a provider below to continue.`,localDisabledNotice:`Local sign-in is disabled. Use one of the SSO providers below.`,loginSuccess:`Logged in successfully`,loginFailed:`Login failed`,enterCredentials:`Please enter username and password`,enterEmail:`Please enter your email address`,oidcLoginFailed:`OIDC login failed`,oidcErrors:{providerError:`The identity provider returned an error`,missingParameters:`OIDC callback is missing required parameters`,invalidState:`OIDC state is invalid or has already been used`,stateExpired:`OIDC login session expired — please try again`,providerNotFound:`OIDC provider not found`,discoveryFailed:`Failed to fetch OIDC discovery document`,invalidDiscovery:`OIDC discovery document is invalid`,networkError:`Network error during OIDC token exchange`,badResponse:`Unexpected response during OIDC token exchange`,noIdToken:`OIDC provider did not return an ID token`,validationFailed:`OIDC token validation failed`,nonceMismatch:`OIDC nonce mismatch — possible replay attack`,missingSubClaim:`OIDC token is missing the sub claim`,noLinkedAccount:`No local account is linked to this OIDC identity`,accountInactive:`Your account is inactive`,userResolutionFailed:`Failed to resolve your account`,internalError:`An internal error occurred during OIDC login`,tokenExchangeFailed:`OIDC token exchange failed`},forgotPasswordTitle:`Forgot Password`,forgotPasswordMessage:`If you've forgotten your password, please contact your system administrator to reset it.`,forgotPasswordEmailMessage:`Enter your email address and we'll send you a new password.`,emailAddress:`Email Address`,emailPlaceholder:`your.email@example.com`,cancel:`Cancel`,sending:`Sending...`,sendResetEmail:`Send Reset Email`,howToReset:`How to reset your password:`,resetStep1:`Contact your Bambuddy administrator`,resetStep2:`Ask them to reset your password in User Management`,resetStep3:`They can set a new temporary password for you`,resetStep4:`Log in with the new password and change it in Settings`,gotIt:`Got it`,resetPassword:{title:`Set New Password`,subtitle:`Enter and confirm your new password below.`,newPassword:`New Password`,newPasswordPlaceholder:`At least 8 characters`,confirmPassword:`Confirm Password`,confirmPasswordPlaceholder:`Repeat new password`,saving:`Saving…`,submit:`Set New Password`,backToLogin:`Back to login`,passwordsDoNotMatch:`Passwords do not match`,passwordTooShort:`Password must be at least 8 characters`,resetFailed:`Password reset failed. The link may have expired.`},twoFA:{title:`Two-Factor Authentication`,subtitle:`Your account is protected with 2FA. Enter the verification code below.`,methodAuthenticator:`Authenticator App`,methodEmail:`Email Code`,methodBackup:`Backup Code`,instructionsTotp:`Open your authenticator app and enter the 6-digit code for Bambuddy.`,instructionsEmail:`A 6-digit code has been sent to your email address. It expires in 10 minutes.`,instructionsEmailNotSent:`Click the button below to receive a verification code via email.`,instructionsBackup:`Enter one of your 8-character backup recovery codes. Each code can only be used once.`,sendCodeButton:`Send Code via Email`,sendingCode:`Sending...`,resendCode:`Resend code`,codeLabel:`Verification Code`,backupCodeLabel:`Backup Code`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Verify`,verifyingButton:`Verifying...`,backToLogin:`← Back to login`,orContinueWith:`or continue with`,signInWith:`Sign in with {{provider}}`,enterCode:`Please enter the verification code`,sendCodeFailed:`Failed to send verification code`,invalidCode:`Invalid code. Please try again.`}},setup:{title:`Bambuddy Setup`,subtitle:`Configure authentication for your Bambuddy instance`,enableAuth:`Enable Authentication`,adminAccount:`Admin Account`,adminAccountDesc:`If admin users already exist, authentication will be enabled using the existing admin accounts. Leave the fields below empty to use existing admins, or enter new credentials to create a new admin user.`,adminUsername:`Admin Username`,adminPassword:`Admin Password`,optionalIfAdminExists:`(optional if admin users exist)`,adminUsernamePlaceholder:`Enter admin username (optional)`,adminPasswordPlaceholder:`Enter admin password (optional)`,confirmPassword:`Confirm Password`,confirmPasswordPlaceholder:`Confirm admin password`,settingUp:`Setting up...`,completeSetup:`Complete Setup`,toast:{authEnabledAdminCreated:`Authentication enabled and admin user created`,authEnabledExistingAdmins:`Authentication enabled using existing admin users`,setupCompleted:`Setup completed`,enterBothCredentials:`Please enter both admin username and password, or leave both empty to use existing admin users`,passwordsDoNotMatch:`Passwords do not match`,passwordTooShort:`Password must be at least 6 characters`}},changePassword:{title:`Change Password`,currentPassword:`Current Password`,currentPasswordPlaceholder:`Enter current password`,newPassword:`New Password`,newPasswordPlaceholder:`Enter new password (min 6 characters)`,confirmPassword:`Confirm New Password`,confirmPasswordPlaceholder:`Confirm new password`,passwordsDoNotMatch:`Passwords do not match`,passwordTooShort:`Password must be at least 6 characters`,changing:`Changing...`,success:`Password changed successfully`,failed:`Failed to change password`},plateAlert:{title:`Print Paused!`,message:`Objects detected on build plate. The print has been automatically paused. Please clear the plate and resume the print.`,understand:`I Understand`},camera:{title:`Camera View`,invalidPrinterId:`Invalid printer ID`,live:`Live`,snapshot:`Snapshot`,restartStream:`Restart stream`,refreshSnapshot:`Refresh snapshot`,fullscreen:`Fullscreen`,exitFullscreen:`Exit fullscreen`,connectingToCamera:`Connecting to camera...`,capturingSnapshot:`Capturing snapshot...`,connectionLost:`Connection lost`,connectionFailed:`Camera connection failed`,reconnecting:`Reconnecting in {{countdown}}s... (attempt {{attempt}}/{{max}})`,reconnectNow:`Reconnect now`,cameraUnavailable:`Camera unavailable`,cameraUnavailableDesc:`Make sure the printer is powered on and connected.`,noCamera:`No camera available`,retry:`Retry`,cameraStream:`Camera stream`,zoomOut:`Zoom out`,zoomIn:`Zoom in`,resetZoom:`Reset zoom`,recording:`Recording`,startRecording:`Start Recording`,stopRecording:`Stop Recording`,chamberLight:`Toggle chamber light`,unavailable:`Camera unavailable`,diagnose:{button:`Diagnose`,modalTitle:`Camera diagnostic`,running:`Running diagnostic...`,runFailed:`Diagnostic could not run: {{error}}`,retry:`Run again`,stage:{tcp_reachable:`Network reachability`,first_frame:`Frame capture`,live_stream_active:`Live stream active`},summary:{all_ok:`Camera is working. The diagnostic completed all stages successfully.`,live_stream_active_healthy:`Camera is currently streaming with recent frames — no test needed.`,printer_unreachable:`Printer is not reachable. Check the IP address, network connection, and that the printer is powered on.`,camera_port_closed:`Printer is reachable but the camera port is closed. Make sure LAN-only mode and Developer Mode are enabled in the printer settings.`,no_frame:`Connected to the camera but no frames were received. Try again, or check that the camera is enabled in the printer settings.`,unknown_failure:`Camera diagnostic failed for an unknown reason. Check the support log for details.`},meta:{protocol:`Protocol`,port:`Port`,profile:`Profile`}}},groups:{title:`Group Management`,subtitle:`Manage permission groups for access control`,backToSettings:`Back to Settings`,createGroup:`Create Group`,noPermission:`You do not have permission to access this page.`,system:`System`,noDescription:`No description`,usersCount:`{{count}} users`,permissionsCount:`{{count}} permissions`,edit:`Edit`,delete:`Delete`,toast:{created:`Group created successfully`,updated:`Group updated successfully`,deleted:`Group deleted successfully`,enterGroupName:`Please enter a group name`},modal:{editGroup:`Edit Group`,createGroup:`Create Group`,cancel:`Cancel`,saving:`Saving...`,creating:`Creating...`,saveChanges:`Save Changes`},form:{groupName:`Group Name`,groupNamePlaceholder:`Enter group name`,systemGroupWarning:`System group names cannot be changed`,description:`Description`,descriptionPlaceholder:`Enter description (optional)`,permissions:`Permissions ({{count}} selected)`},deleteModal:{title:`Delete Group`,message:`Are you sure you want to delete this group? Users in this group will lose these permissions.`,confirm:`Delete Group`},editor:{title:`Edit Group`,createTitle:`Create Group`,search:`Search permissions...`,selectAll:`Select All`,clearAll:`Clear All`,permissionsSelected:`{{count}} selected`,noResults:`No permissions match your search`,websocketHint:`Required for live updates. Without it, the interface falls back to periodic polling.`}},users:{title:`User Management`,subtitle:`Manage users and their access to your Bambuddy instance`,backToSettings:`Back to Settings`,createUser:`Create User`,noPermission:`You do not have permission to access this page.`,admin:`Admin`,noGroups:`No groups`,active:`Active`,inactive:`Inactive`,edit:`Edit`,delete:`Delete`,system:`System`,noGroupsAvailable:`No groups available`,table:{username:`Username`,groups:`Groups`,status:`Status`,actions:`Actions`},toast:{created:`User created successfully`,updated:`User updated successfully`,deleted:`User deleted successfully`,fillRequired:`Please fill in all required fields`,passwordsDoNotMatch:`Passwords do not match`,passwordTooShort:`Password must be at least 6 characters`,ldapProvisioned:`Provisioned LDAP user "{{username}}"`},modal:{createUser:`Create User`,editUser:`Edit User`,cancel:`Cancel`,creating:`Creating...`,saving:`Saving...`,saveChanges:`Save Changes`,advancedAuthSubtitle:`with Advanced Authentication`,tabsAriaLabel:`User source`,localTab:`Local`,ldapTab:`LDAP`,ldapSearchLabel:`Search directory`,ldapSearchPlaceholder:`Type a username, name, or email...`,ldapMinChars:`Type at least 2 characters to search`,ldapTypeToSearch:`Start typing to search the LDAP directory`,ldapSearching:`Searching directory...`,ldapNoResults:`No matching users in the directory`,ldapSearchError:`Directory search failed. Check the LDAP server status.`,ldapAlreadyProvisioned:`Already provisioned`,ldapSelectedLabel:`Selected`,ldapProvision:`Provision user`,ldapProvisioning:`Provisioning...`,ldapErrorProvision:`Provisioning failed. Check the LDAP server status and try again.`},form:{username:`Username`,usernamePlaceholder:`Enter username`,email:`Email`,emailPlaceholder:`user@example.com`,password:`Password`,passwordPlaceholder:`Enter password`,confirmPassword:`Confirm Password`,confirmPasswordPlaceholder:`Confirm password`,newPasswordPlaceholder:`Enter new password`,confirmNewPasswordPlaceholder:`Confirm new password`,leaveBlankToKeep:`leave blank to keep current`,groups:`Groups`,optional:`optional`,autoGeneratedPassword:`A secure password will be automatically generated and emailed to the user.`,passwordManagedByAdvancedAuth:`Password is managed by Advanced Authentication. Use "Reset Password" to send a new password to the user via email.`,resetPassword:`Reset Password`,resettingPassword:`Resetting Password...`},deleteModal:{title:`Delete User`,message:`Are you sure you want to delete this user? This action cannot be undone.`,confirm:`Delete User`}},streamOverlay:{title:`Stream Overlay`,invalidPrinterId:`Invalid printer ID`,cameraStream:`Camera stream`,progress:`Progress`,eta:`ETA`,printerIdle:`Printer is idle`,printerOffline:`Printer offline`,builder:{title:`Streaming Overlay`,description:`Build the URL for a streaming overlay — a full-screen camera view with live print data drawn over it, for OBS, a wall display, or any browser source. Pick the fields you want and copy the URL.`,printer:`Printer`,size:`Text size`,sizeSmall:`Small`,sizeMedium:`Medium`,sizeLarge:`Large`,fps:`Frame rate`,fpsHint:`A1 and P1 cameras top out around 5 fps whatever you ask for.`,token:`Streaming Overlay token (optional)`,tokenHint:`Only needed when login is enabled: OBS has no session of its own. Create one above with the Streaming Overlay scope.`,tokenWarning:`This URL contains a token — anyone who can read it can watch the stream and see the file name. Revoke the token to cut it off.`,fields:`Fields to show`,fieldPrinter:`Printer name`,fieldFilename:`File name`,fieldStatus:`Status`,fieldProgress:`Progress bar`,fieldLayers:`Layer count`,fieldEta:`Time remaining and ETA`,fieldCamera:`Camera feed`,chamberHint:`Chamber temperature only appears on models with a real chamber sensor — P1 and A1 printers report a meaningless value, so it is left out there.`,urlTitle:`Overlay URL`,open:`Open`,showPreview:`Show preview`,hidePreview:`Hide preview`,previewTitle:`Overlay preview`},status:{printing:`Printing`,paused:`Paused`,finished:`Finished`,failed:`Failed`,idle:`Idle`,unknown:`Unknown`}},profiles:{title:`Profiles`,subtitle:`Manage your slicer presets and pressure advance calibrations`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Local Profiles`,kprofiles:`K-Profiles`},orcaCloud:{connectedAs:`Connected as`,connectedShort:`Connected to Orca Cloud`,logout:`Disconnect`,noLogoutPermission:`You do not have permission to disconnect`,noConnectPermission:`You do not have permission to connect to Orca Cloud`,retry:`Retry`,connectButton:`Connect Orca Cloud`,connect:{title:`Connect to Orca Cloud`,description:`Sign in to your Orca Cloud account to sync your slicer profiles into Bambuddy.`},device:{title:`Approve Bambuddy in Orca Cloud`,instruction:`Open Orca Cloud and approve this code. Bambuddy connects automatically once you approve.`,codeLabel:`Your pairing code`,openButton:`Open Orca Cloud approval page`,manualHint:`Or go to {{url}} and enter the code above.`,waiting:`Waiting for you to approve…`,cancel:`Cancel`},profiles:{title:`Your Orca Cloud profiles ({{count}})`,refresh:`Refresh`,empty:`No profiles found in your Orca Cloud account yet.`},toast:{disconnected:`Disconnected from Orca Cloud`},errors:{startFailed:`Could not start Orca Cloud pairing.`,denied:`The pairing was denied in Orca Cloud.`,expired:`The pairing code expired. Click Connect to try again.`,pollFailed:`Lost the connection while waiting for approval. Please try again.`}},localProfiles:{title:`Local Profiles`,subtitle:`Import and manage slicer presets from OrcaSlicer`,import:`Import Profiles`,importDesc:`Drop .bbscfg, .bbsflmt, .orca_filament, .zip, or .json files here`,importing:`Importing...`,search:`Search local presets...`,noPresets:`No local presets yet`,noSearchResults:`No presets match your search`,badge:`Local`,edit:`Edit`,delete:`Delete`,cancel:`Cancel`,deleteConfirmTitle:`Delete Preset`,deleteConfirm:`Are you sure you want to delete this preset? This cannot be undone.`,source:`Source`,inheritsFrom:`Inherits`,filamentType:`Type`,vendor:`Vendor`,compatiblePrinters:`Printers`,nozzleTemp:`Nozzle Temp`,cost:`Cost`,density:`Density`,pressureAdvance:`Pressure Advance`,filament:`Filament`,process:`Process`,printer:`Printer`,toast:{importSuccess:`{{count}} preset(s) imported`,importSkipped:`{{count}} preset(s) skipped (duplicates)`,importError:`{{count}} error(s) during import`,deleted:`Preset deleted`,updated:`Preset updated`}},connectedAs:`Connected as`,signInExpiredTitle:`Bambu Cloud sign-in expired`,signInExpiredBody:`Bambu Lab no longer accepts the stored token. Sign in again to restore cloud profiles, MakerWorld imports and firmware checks.`,logout:`Logout`,noLogoutPermission:`You do not have permission to logout`,failedToLoad:`Failed to load profiles`,retry:`Retry`,time:{justNow:`Just now`,minsAgo:`{{count}}m ago`,hoursAgo:`{{count}}h ago`,daysAgo:`{{count}}d ago`},toast:{loggedOut:`Logged out`},login:{title:`Connect to Bambu Cloud`,subtitle:`Sync your slicer presets across devices`,email:`Email`,password:`Password`,region:`Region`,regionGlobal:`Global`,regionChina:`China`,verificationCode:`Verification Code`,totpCode:`Authenticator Code`,checkEmail:`Check your email ({{email}}) for a 6-digit code`,enterTotpHint:`Enter the 6-digit code from your authenticator app`,accessToken:`Access Token`,accessTokenHint:`Paste your Bambu Cloud access token. China-region accounts must use this path (phone-bound — email login unavailable). See the wiki for how to retrieve the token from MakerWorld cookies.`,back:`Back`,loginButton:`Login`,verifyButton:`Verify`,setTokenButton:`Set Token`,useToken:`Use access token instead`,captchaTitle:`Bambu Cloud is asking for a CAPTCHA`,captchaBody:`Bambu is challenging your network before it will accept a sign-in, and the challenge cannot be answered from Bambuddy. Your email and password are not the problem. The block is tied to your public IP address and normally clears by itself within a few hours — retrying repeatedly makes it last longer. To sign in now, use an access token from a browser session instead.`,useEmail:`Login with email instead`,toast:{loggedIn:`Logged in successfully`,codeSent:`Verification code sent to your email`,enterTotp:`Enter code from your authenticator app`,tokenSet:`Token set successfully`}},presets:{myPreset:`My preset (editable)`,duplicate:`Duplicate`,editable:`Editable`,failedToLoadDetails:`Failed to load preset details`,deleteConfirm:`Delete this preset?`,deleteWarning:`This will permanently delete "{{name}}" from Bambu Cloud. This cannot be undone.`,noDuplicatePermission:`You do not have permission to duplicate presets`,noEditPermission:`You do not have permission to edit presets`,noDeletePermission:`You do not have permission to delete presets`,types:{filament:`Filament preset`,printer:`Printer preset`,process:`Process preset`},toast:{deleted:`Preset deleted`,created:`Preset created`,updated:`Preset updated`,duplicated:`Preset duplicated`,fieldAdded:`Field "{{key}}" added`,exported:`Preset exported`},baseLabel:`Base: {{name}}`,currentLabel:`Current: {{name}}`,newPreset:`New Preset`,editPreset:`Edit Preset`,duplicatePreset:`Duplicate Preset`,createNewPreset:`Create New Preset`,customizeSettings:`Customize settings for your new preset`,compareWithBase:`Compare with base preset`,compare:`Compare`,basePreset:`Base Preset`,selectBasePreset:`Select base preset...`,presetName:`Preset Name`,myCustomPreset:`My custom preset`,inheritsFrom:`Inherits from`,dropJsonToImport:`Drop JSON to import`,tabs:{common:`Common`,allFields:`All Fields`},availableFields:`Available Fields`,searchFieldsPlaceholder:`Search fields...`,noMatchingFields:`No matching fields`,allFieldsAdded:`All fields added`,addCustomField:`Add custom field`,yourOverrides:`Your Overrides`,noOverridesYet:`No overrides yet`,clickFieldsToAdd:`Click fields on the left to add them`,saveAsTemplate:`Save as template`,jsonTip:`Tip: Drag & drop a .json file anywhere on this modal to import settings`},cloudView:{searchPlaceholder:`Search presets...`,templates:`Templates`,refresh:`Refresh`,newPreset:`New Preset`,clearFilters:`Clear filters`,compareMode:`Compare Mode`,selectAnotherPreset:`Select another {{type}} preset`,clickTwoPresets:`Click two presets of the same type to compare`,selectFirst:`1. Select first`,selectSecond:`2. Select second`,compareNow:`Compare Now`,lastSynced:`Last synced:`,showingCount:`Showing {{showing}} of {{total}} presets`,noPresetsFound:`No presets found`,columns:{filament:`Filament`,process:`Process`,printer:`Printer`},noFilamentPresets:`No filament presets`,noProcessPresets:`No process presets`,noPrinterPresets:`No printer presets`,filters:{type:`Type`,owner:`Owner`,printer:`Printer`,nozzle:`Nozzle`,filament:`Filament`,layer:`Layer`,all:`All`,myPresets:`My Presets`,builtIn:`Built-in`,process:`Process`},noTemplatesPermission:`You do not have permission to manage templates`,noRefreshPermission:`You do not have permission to refresh profiles`,noCreatePermission:`You do not have permission to create presets`},templates:{title:`Quick Templates`,noTemplates:`No templates yet`,createFirst:`Create templates from the preset editor`,typeFilter:`Type:`,deleteTitle:`Delete Template`,deleteWarning:`This action cannot be undone`,deleteConfirm:`Are you sure you want to delete "{{name}}"?`,namePlaceholder:`Template name`,descriptionPlaceholder:`Description`,settingsJson:`Settings (JSON)`,fieldsCount:`{{count}} fields`,shownInModals:`Shown in modals`,hiddenInModals:`Hidden in modals`,apply:`Apply`,toast:{deleted:`Template deleted`,updated:`Template updated`,created:`Template created`,applied:`Template applied`}}},support:{debugLoggingActive:`Debug logging is active`,manageLogs:`Manage`,collectItem7:`Printer connectivity and firmware versions`,collectItem8:`Integration status (Spoolman, MQTT, HA)`,collectItem9:`Network interfaces (subnets only)`,collectItem10:`Python package versions`,collectItem11:`Database health checks`,collectItem12:`Docker environment details`,bundleGenerating:`Generating bundle...`,bundleStepConnection:`Running printer connectivity checks`,bundleStepVirtualPrinters:`Running virtual-printer setup checks`,bundleStepLogScan:`Scanning recent logs for known issues`,bundleStepBuild:`Building the support bundle ZIP`},fileManager:{variants:{badge:`{{count}} versions`,groupAction:`Group as versions`,groupTooltip:`Mark these files as the same job sliced for different printers`,grouped:`Grouped {{count}} files as versions`,printAlternatives:`Print ({{count}} alternatives)`},title:`File Manager`,subtitle:`Organize and manage your print files`,uploadFiles:`Upload Files`,newFolder:`New Folder`,folderName:`Folder Name`,folderNamePlaceholder:`e.g., Functional Parts`,renameFile:`Rename File`,renameFolder:`Rename Folder`,invalidFilenameChar:`The character "{{char}}" is not allowed in print filenames. The printer SD card rejects: < > : " / \\ | ? *`,moveFiles:`Move {{count}} File(s)`,rootNoFolder:`Root (No Folder)`,current:`current`,linkFolder:`Link Folder`,linkFolderDescription:`Link "{{name}}" to a project or archive for quick access.`,project:`Project`,archive:`Archive`,noProjectsFound:`No projects found`,noArchivesFound:`No archives found`,unlink:`Unlink`,link:`Link`,dragDropFiles:`Drag & drop files here`,dropFilesHere:`Drop files here`,releaseToUpload:`Release to upload`,orClickToBrowse:`or click to browse`,allFileTypesSupported:`All file types supported. ZIP files will be extracted.`,zipFilesDetected:`ZIP files detected`,zipExtractOptions:`ZIP files will be extracted. Choose how to handle folder structure:`,preserveZipStructure:`Preserve folder structure from ZIP`,createFolderFromZip:`Create folder from ZIP filename`,stlThumbnailGeneration:`STL thumbnail generation`,zipMayContainStl:`ZIP files may contain STL files. Thumbnails can be generated during extraction.`,thumbnailsCanBeGenerated:`Thumbnails can be generated for STL files. Large models may take longer to process.`,generateThumbnailsForStl:`Generate thumbnails for STL files`,threemfDetected:`3MF files detected`,threemfExtractionInfo:`Printer model, material, color, and print settings will be automatically extracted from 3MF files.`,willBeExtracted:`Will be extracted`,filesExtracted:`{{count}} files extracted`,uploadComplete:`Upload complete: {{succeeded}} succeeded`,uploadFailed:`Upload failed`,zipFilesFailed:`{{count}} files failed`,uploading:`Uploading...`,changeLink:`Change Link...`,linkTo:`Link to...`,linkToProjectOrArchive:`Link to project or archive`,generateThumbnail:`Generate Thumbnail`,generateThumbnails:`Generate Thumbnails`,generateThumbnailsForMissing:`Generate thumbnails for STL files missing them`,gridView:`Grid view`,listView:`List view`,lowDiskSpaceWarning:`Low disk space warning`,lowDiskSpaceDetails:`Only {{free}} free of {{total}} total. Threshold is set to {{threshold}} GB in settings.`,files:`Files`,folders:`Folders`,size:`Size`,free:`Free`,allFiles:`All Files`,allExternal:`External`,externalIsEmpty:`No external files`,externalEmptyDescription:`Files in your linked external folders will appear here.`,wrap:`Wrap`,enableTextWrapping:`Enable text wrapping`,disableTextWrapping:`Disable text wrapping`,collapse:`Collapse`,collapseFoldersByDefault:`Collapse folders by default`,expandFoldersByDefault:`Expand folders by default`,folderSort:`Sort folders`,folderSortByName:`By name`,folderSortByActivity:`By recent activity`,dragToResizeTooltip:`Drag to resize, double-click to reset`,searchFiles:`Search files...`,searchSubfoldersHint:`Including subfolders`,readme:{truncated:`Truncated`,show:`Show README`,hide:`Hide README`,label:`README`},tags:{title:`Tags`,subtitle:`Label files for cross-cutting filtering — toys, kid-safe, PETG-only, anything.`,manage:`Tags`,manageTitle:`Manage tag catalog`,add:`New tag`,edit:`Rename tag`,name:`Name`,fileCount:`Files`,empty:`No tags yet. Create one to start labelling files.`,noMatches:`No matching tags.`,createPlaceholder:`e.g. toys, kid-safe, petg`,createButton:`Create`,nameRequired:`Name is required.`,searchPlaceholder:`Filter tags...`,created:`Tag created.`,updated:`Tag renamed.`,deleted:`Tag removed.`,saveFailed:`Could not save tag.`,deleteFailed:`Could not remove tag.`,applyFailed:`Could not apply tags.`,applyAdd:`Add tags`,applyRemove:`Remove tags`,applyAddSuccess:`Added {{count}} tag(s) across {{files}} file(s).`,applyRemoveSuccess:`Removed {{count}} tag(s) across {{files}} file(s).`,actionAdd:`Add to selected files`,actionRemove:`Remove from selected files`,tagAction:`Tag`,bulkTitle:`Tag {{count}} selected file(s)`,bulkTooltip:`Add or remove tags on every selected file.`,noPermission:`You do not have permission to tag files.`,filterLabel:`Filtering by:`,clearAll:`Clear all`,confirmDelete:`Delete tag "{{name}}"?`,confirmDeleteMessage:`This removes the tag from the catalog. Files keep their other tags.`,confirmDeleteInUseMessage:`This tag is on {{count}} file(s). Deleting removes the chip from all of them; files themselves are untouched.`,editAria:`Edit {{name}}`,deleteAria:`Delete {{name}}`},allTypes:`All types`,prints:`Prints`,ascending:`Ascending`,descending:`Descending`,showModified:`Show modified dates`,hideModified:`Hide modified dates`,lastModified:`Last modified`,lastActivity:`Last activity`,resultsCount:`{{showing}} of {{total}} files`,selectAll:`Select All`,deselectAll:`Deselect All`,selected:`{{count}} selected`,adding:`Adding...`,loadingFiles:`Loading files...`,folderIsEmpty:`Folder is empty`,noFilesYet:`No files yet`,folderEmptyDescription:`Upload files or move files into this folder to get started.`,noFilesDescription:`Upload files to start organizing your print-related files.`,noMatchingFiles:`No matching files`,noMatchingFilesDescription:`No files match your current search or filter criteria.`,clearFilters:`Clear filters`,printedCount:`Printed {{count}}x`,uploadedBy:`Uploaded By`,deleteFolder:`Delete Folder`,deleteFile:`Delete File`,deleteFilesCount:`Delete {{count}} Files`,deleteFolderConfirm:`Are you sure you want to delete this folder? All files inside will also be deleted.`,deleteFileConfirm:`Are you sure you want to delete this file?`,deleteFilesConfirm:`Are you sure you want to delete {{count}} selected files? This action cannot be undone.`,deleting:`Deleting...`,noPermissionRenameFolder:`You do not have permission to rename folders`,noPermissionLinkFolder:`You do not have permission to link folders`,noPermissionDeleteFolder:`You do not have permission to delete folders`,onlyEmptyFoldersDeletable:`You can only delete empty folders`,noPermissionPrint:`You do not have permission to print`,noPermissionAddToQueue:`You do not have permission to add to queue`,noPermissionSlice:`You do not have permission to slice files`,noPermissionDownload:`You do not have permission to download files`,noPermissionPreview:`You do not have permission to preview files`,preview3d:`3D Preview`,noPermissionRenameFile:`You do not have permission to rename this file`,noPermissionGenerateThumbnail:`You do not have permission to generate thumbnails`,noPermissionDeleteFile:`You do not have permission to delete this file`,noPermissionCreateFolder:`You do not have permission to create folders`,noPermissionUpload:`You do not have permission to upload files`,noPermissionMoveFiles:`You do not have permission to move files`,noPermissionDeleteFiles:`You do not have permission to delete files`,linkExternal:`Link External`,linkExternalFolder:`Link External Folder`,linkExternalFolderDescription:`Mount a host directory (NAS, USB, network share) into the File Manager. Files are not copied — they are accessed directly from the original path.`,externalFolderNamePlaceholder:`e.g., NAS Prints`,externalPath:`Host Path`,externalPathHelp:`Absolute path to the directory on the Docker host. Must be bind-mounted into the container.`,readOnly:`Read Only`,readOnlyHelp:`prevents uploads and deletions`,showHiddenFiles:`Show hidden files (dotfiles)`,externalFolder:`External Folder`,scanFolder:`Scan`,toast:{folderCreated:`Folder created`,openInSlicerFailed:`Could not open in slicer`,folderDeleted:`Folder deleted`,fileDeleted:`File deleted`,filesDeleted:`Deleted {{count}} files`,filesMoved:`Files moved`,folderLinked:`Folder linked`,folderUnlinked:`Folder unlinked`,externalFolderLinked:`External folder linked and scanned`,folderScanned:`Scan complete: {{added}} added, {{removed}} removed`,addedToQueue:`Added {{count}} file(s) to queue`,addedToQueuePartial:`Added {{added}} file(s), {{failed}} failed`,failedToAddToQueue:`Failed to add files: {{error}}`,fileRenamed:`File renamed`,folderRenamed:`Folder renamed`,thumbnailsGenerated:`Generated {{count}} thumbnail(s)`,thumbnailsGeneratedPartial:`Generated {{succeeded}} thumbnail(s), {{failed}} failed`,noStlMissingThumbnails:`No STL files missing thumbnails`,failedToGenerateThumbnails:`Failed to generate thumbnails: {{error}}`,thumbnailGenerated:`Thumbnail generated`,failedToGenerateThumbnail:`Failed to generate thumbnail: {{error}}`}},projects:{parentLabel:`Parent project`,parentNone:`None (top-level project)`,parentHint:`Nest this project under another one so its figures roll up into a master project`,partOf:`Part of {{name}}`,subProjectCount:`{{count}} sub-projects`,subProjectsOf:`Sub-projects of {{name}}`,collapseSubProjects:`Collapse sub-projects`,expandSubProjects:`Expand sub-projects`,title:`Projects`,subtitle:`Organize and track your 3D printing projects`,newProject:`New Project`,editProject:`Edit Project`,deleteProject:`Delete Project`,projectName:`Project Name`,description:`Description`,noProjects:`No projects yet`,noProjectsFiltered:`No {{status}} projects`,noProjectsFilteredHelp:`You don't have any {{status}} projects. Projects will appear here when their status changes.`,createFirst:`Create your first project to start organizing related prints, tracking progress, and managing your builds.`,createFirstButton:`Create Your First Project`,create:`Create`,files:`Files`,prints:`Prints`,plates:`plates`,parts:`parts`,lastModified:`Last Modified`,deleteConfirm:`Are you sure you want to delete this project? Archives and queue items will be unlinked but not deleted.`,addFiles:`Add Files`,removeFile:`Remove File`,viewDetails:`View Details`,namePlaceholder:`e.g., Voron 2.4 Build`,descriptionPlaceholder:`Optional description...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URL must start with http:// or https://`,openExternalUrl:`Open project URL`,coverImageLabel:`Cover photo`,coverImageAlt:`Project cover photo`,coverImageUpload:`Upload`,coverImageReplace:`Replace`,coverImageRemove:`Remove`,color:`Color`,targetPlates:`Target Plates`,targetPlatesPlaceholder:`e.g., 25`,targetPlatesHelp:`Number of print jobs`,targetParts:`Target Parts`,targetPartsPlaceholder:`e.g., 150`,targetPartsHelp:`Total objects needed`,targetSets:`Copies per File`,targetSetsPlaceholder:`e.g., 10`,targetSetsHelp:`Times each printable file should be printed`,tagsLabel:`Tags (comma-separated)`,tagsPlaceholder:`e.g., voron, functional, gift`,dueDate:`Due Date`,priority:`Priority`,priorityLow:`Low`,priorityNormal:`Normal`,priorityHigh:`High`,priorityUrgent:`Urgent`,statusActive:`Active`,statusCompleted:`Completed`,statusArchived:`Archived`,done:`Done`,completed:`completed`,failed:`failed`,inQueue:`in queue`,noPrintsYet:`No prints yet`,printJobs:`Print jobs (plates)`,partsPrinted:`Parts printed`,failedParts:`Failed parts`,import:`Import`,export:`Export`,importProject:`Import project`,exportAll:`Export all projects`,loading:`Loading projects...`,noEditPermission:`You do not have permission to edit projects`,noDeletePermission:`You do not have permission to delete projects`,noCreatePermission:`You do not have permission to create projects`,noImportPermission:`You do not have permission to import projects`,noExportPermission:`You do not have permission to export projects`,toast:{created:`Project created`,updated:`Project updated`,deleted:`Project deleted`,imported:`Project imported`,multipleImported:`{{count}} projects imported`,importFailed:`Import failed`,exported:`Projects exported (metadata only)`}},projectDetail:{notFound:`Project not found`,backToProjects:`Back to Projects`,export:`Export`,exportProject:`Export project`,noExportPermission:`You do not have permission to export projects`,noEditPermission:`You do not have permission to edit projects`,partOf:`Part of:`,priorityLabel:`Priority:`,noPrints:`No prints in this project yet`,status:{active:`Active`,completed:`Completed`,archived:`Archived`},priority:{low:`Low`,normal:`Normal`,high:`High`,urgent:`Urgent`},dueDate:{overdue:`Overdue`,today:`Due today`,daysLeft:`{{count}} days left`},progress:{platesProgress:`Plates Progress`,partsProgress:`Parts Progress`,setsProgress:`Complete Sets`,sets:`sets`,setsHint:`A set is complete once every printable file has reached this count`,printJobs:`print jobs`,parts:`parts`,percentComplete:`{{percent}}% complete`,remaining:`{{count}} remaining`},stats:{printJobs:`Print Jobs`,total:`total`,failed:`{{count}} failed`,partsPrinted:`{{count}} parts printed`,printTime:`Print Time`,filamentUsed:`Filament Used`},cost:{title:`Cost Tracking`,filamentCost:`Filament Cost`,energy:`Energy`,totalCost:`Estimated Cost`,total:`Total`,includesBom:`incl. BOM`,budget:`Budget`,remaining:`Remaining`},subProjects:{title:`Sub-projects ({{count}})`,jobs:`{{count}} jobs`},rollup:{title:`Including {{count}} sub-projects`,progress:`Overall progress`,percentComplete:`{{percent}}% complete`},notes:{title:`Notes`,noEditPermission:`You do not have permission to edit notes`,placeholder:`Add notes about this project...`,empty:`No notes yet. Click Edit to add notes.`},files:{title:`Files`,linkFolders:`Link folders from the File Manager`,forQuickAccess:`to this project for quick access.`,fileCount:`{{count}} file(s)`,empty:`No folders linked. Go to File Manager and link a folder to this project.`,printedCount:`Printed {{count}} time(s)`,progressTooltip:`{{done}} of {{target}} completed prints`,noFiles:`No files in this folder.`},bom:{title:`Bill of Materials`,acquired:`{{completed}}/{{total}} acquired`,showAll:`Show all`,hideDone:`Hide done`,addPart:`Add Part`,noAddPermission:`You do not have permission to add parts`,partNamePlaceholder:`Part name (e.g., M3x8 screws)`,partName:`Part name`,qty:`Qty`,price:`Price ({{currency}})`,sourcingUrlPlaceholder:`Sourcing URL (optional)`,remarksPlaceholder:`Remarks (optional)`,deletePart:`Delete Part`,deleteConfirm:`Are you sure you want to delete "{{name}}"?`,noUpdatePermission:`You do not have permission to update parts`,noEditPermission:`You do not have permission to edit parts`,noDeletePermission:`You do not have permission to delete parts`,totalCost:`Total cost:`,empty:`No parts in the bill of materials. Add hardware, electronics, or other components to track what needs to be sourced.`},timeline:{title:`Activity Timeline`,empty:`No activity yet.`},template:{saveAsTemplate:`Save as Template`,noCreatePermission:`You do not have permission to create templates`},queue:{title:`Queue`,viewAll:`View all`,printing:`{{count}} printing`,queued:`{{count}} queued`},prints:{title:`Prints ({{count}})`},toast:{projectUpdated:`Project updated`,partAdded:`Part added`,partRemoved:`Part removed`,exportFailed:`Export failed`,projectExported:`Project exported`,templateCreated:`Template created`}},system:{title:`System Information`,version:`Version`,uptime:`Uptime`,cpuUsage:`CPU Usage`,memoryUsage:`Memory Usage`,diskUsage:`Disk Usage`,networkInfo:`Network Info`,logs:`Logs`,debugMode:`Debug Mode`,enableDebug:`Enable Debug Logging`,disableDebug:`Disable Debug Logging`,downloadLogs:`Download Logs`,clearLogs:`Clear Logs`,dockerInfo:`Docker Info`,containerName:`Container Name`,imageName:`Image Name`,platform:`Platform`,architecture:`Architecture`},sponsors:{sectionTitle:`Independent & community-funded`,tagline:`Bambuddy is free and stays that way because people choose to support it. No VC, no cloud lock-in.`,viewSupporters:`View supporters`,toastPrints:`You've completed {{count}} prints with Bambuddy. Bambuddy stays free thanks to its supporters.`,toastCost:`You've tracked {{total}} in filament with Bambuddy. See who keeps the project independent.`,toastArchives:`{{count}} prints archived with Bambuddy. See who keeps it independent.`,toastAnniversary:`One year with Bambuddy! See who keeps the project independent.`,toastVersionUpdate:`Updated to v{{version}}. Bambuddy stays free thanks to its supporters.`,toastBusiness:`Running Bambuddy on {{count}} printers? There's a support plan for teams — priority fixes, invoicing, and a direct line to the maintainer.`,businessCta:`Bambuddy for business`,businessTitle:`Bambuddy for business`,businessTagline:`You're running {{count}} printers. Priority support, commercial licensing and invoicing are available for teams and print farms.`},library:{title:`Filament Library`,addFilament:`Add Filament`,editFilament:`Edit Filament`,deleteFilament:`Delete Filament`,vendor:`Vendor`,material:`Material`,color:`Color`,kFactor:`K Factor`,temperature:`Temperature`,noFilaments:`No filaments in library`,deleteConfirm:`Are you sure you want to delete this filament?`,importFromPrinter:`Import from Printer`,exportToFile:`Export to File`,runWithPipeline:{actionLabel:`Run with pipeline`,noPermission:`You do not have permission to run pipelines`,modalTitle:`Run with pipeline`,confirmTitle:`Confirm run`,confirmIntro:`Pre-flight found issues with this run`,sourceHint:`Source`,pipelineHint:`Pipeline`,targetHint:`Target`,pipelineListAria:`Available pipelines`,runAnyway:`Run anyway`,loading:`Loading…`,empty:`No pipelines saved yet. Open the Slice dialog and click "Save as pipeline" to create one.`,noTarget:`No target printer set`,noTargetMessage:`This pipeline has no target printer set. Open it in Settings to pick one.`,copies:`Copies`,copiesHint:`max {{n}}`,classTarget:`Any {{model}}`,toast:{started:`Pipeline run started`,failed:`Could not start run`},issue:{printerNotSet:`No target printer set on this pipeline.`,printerNotFound:`Target printer no longer exists.`,printerDisabled:`Target printer is disabled.`,printerOffline:`Target printer is offline.`,filamentType:`Filament slot {{slot}}: expected {{expected}}, AMS has {{actual}}`,filamentColor:`Filament slot {{slot}}: colour differs (expected {{expected}}, AMS has {{actual}})`,amsSlotMissing:`AMS slot {{slot}} not available on this printer`,filamentUnverified:`Filament slot {{slot}} comes from a cloud / standard preset and could not be statically verified.`,noClassMatches:`No printers in this install match the pipeline's target model class ({{expected}}).`,classNotSet:`Pipeline target is set to a printer class but no model was chosen.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Showing slicer defaults: your slicer sidecar is older than this feature and can't report a preset's values. Update the sidecar image to see them. Anything you don't change still uses the preset.`,presetValuesNotConfigured:`Showing slicer defaults: no slicer sidecar is configured, so a preset's values can't be read. Anything you don't change still uses the preset.`,presetValuesSidecarUnavailable:`Showing slicer defaults: the slicer sidecar did not answer, so a preset's values can't be read. Anything you don't change still uses the preset.`,presetValuesUnavailable:`Showing slicer defaults: the picked preset's own values could not be read. Anything you don't change still uses the preset.`,filamentDefault:`Default`,fromFile:`from file`,fromFileHint:`The designer changed this in the source file. Its value is {{value}}.`,fromFilePrinterCoupled:`designer's printer`,fromFilePrinterCoupledHint:`Tuned for the printer this file was designed for -- may be wrong or out of range on yours.`,fromFileOverridesPreset:`overrides preset`,fromFileOverridesPresetHint:`The file sets this to {{value}} where the preset you picked uses {{preset}}. Tick it only if the file should win.`,useFromFile:`Use the source file's value for {{option}}`,otherFromFile:`Other settings from this file`,fromFileSummary:`The designer changed {{count}} process settings in this file. Only the ones you tick are used.`,fromFileUseAll:`Use the designer's settings`,fromFileUseAllHint:`Ticks the settings that carry across printers. The ones tuned for the designer's own printer, and the ones that define the preset you picked, stay off.`,fromFileClear:`Clear {{count}}`,loading:`Loading slicer settings…`,mode:{simple:`Simple`,advanced:`Advanced`,expert:`Expert`},searchPlaceholder:`Search settings`,resetAll:`Reset {{count}}`,resetOption:`Reset to default`,noMatches:`No settings match this search.`},slice:{filamentSlotUnset:`not set`,processSettingsEmbedded:`Not used while "Use the file's built-in settings" is on -- the file's own settings drive this slice.`,processSettingsInactive:`Inactive`,presetsHidden:`{{count}} hidden`,showAllPresets:`Show all`,showFewerPresets:`Show fewer`,processSettings:`Process settings`,processSettingsHint:`Adjust the picked preset for this slice. Anything you don't touch stays as the preset defines it.`,processSettingsChanged:`{{count}} changed`,processSettingsUnchanged:`Preset defaults`,title:`Slice model`,action:`Slice`,actionAll:`Slice all {{count}} plates`,actionAllTitle:`Slice every plate into one multi-plate output (single archive). Filament selection covers every slot the project defines.`,allPlatesToggle:`Slice all {{count}} plates`,slicing:`Slicing…`,printer:`Printer profile`,process:`Process profile`,filament:`Filament profile`,filamentSlot:`Filament {{index}} ({{type}})`,filamentColour:`Filament colour`,selectPreset:`— Select a preset —`,loadingPresets:`Loading presets…`,analyzingPlateFilaments:`Analyzing plate filaments…`,analyzingPlateFilamentsHint:`Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.`,previewToast:`Analyzing {{name}} — {{elapsed}}`,previewWithProgress:`Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— not used by this plate`,noPresetsForSlot:`No presets available`,otherPrinters:`Other printers`,presetsLoadFailed:`Failed to load presets. Open Settings → Profiles to import them first.`,refreshPresets:`Refresh`,refreshPresetsTitle:`Refresh presets — fetch the latest cloud and bundled listings (use after deleting a preset in Bambu Studio or Bambu Handy)`,allPresetsRequired:`All presets must be selected`,useEmbedded:`Use the file's built-in settings`,useEmbeddedHint:`Slice it the way the designer set it up (walls, infill, filament) instead of the profiles above. Offered because your printer matches the file's.`,autoOrient:`Auto-orient objects`,autoOrientHint:`Let the slicer turn each object onto its best printing side first. Overrides the way the model was laid down in the file.`,autoArrange:`Auto-arrange on the plate`,autoArrangeHint:`Let the slicer position the objects so they no longer overlap. Replaces the layout the file came with.`,enqueuing:`Submitting slice job…`,queued:`Queued…`,failed:`Slicing failed. Check the slicer sidecar logs.`,startedToast:`Slicing {{name}} in the background…`,queuedToast:`Queued: {{name}} — {{elapsed}}`,runningToast:`Slicing {{name}} — {{elapsed}}`,runningWithProgress:`{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,runningWithProgressMultiPlate:`Plate {{plateIndex}} of {{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,completedToast:`Sliced {{name}}`,externalWriteFallbackToast:`Saved to the internal library: the external folder could not be written to`,failedTitle:`Slicing failed`,failedToast:`Slicing {{name}} failed: {{detail}}`,tier:{local:`Imported`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Standard`},cloud:{notAuthenticated:`Sign in to Bambu Cloud (Settings → Profiles → Bambu Cloud) to see your cloud presets.`,expired:`Bambu Cloud session expired — sign in again to refresh your cloud presets.`,unreachable:`Bambu Cloud is unreachable right now. Local and standard presets still work.`},orcaCloud:{notAuthenticated:`Sign in to Orca Cloud (Profiles → Orca Cloud) to see your Orca presets.`,expired:`Orca Cloud session expired — sign in again to refresh your Orca presets.`,unreachable:`Orca Cloud is unreachable right now. Other presets still work.`},bedType:{label:`Build plate`,auto:`Auto (use process preset)`,coolPlate:`Cool Plate`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`},pipelines:{label:`Pipeline`,applyAria:`Apply pipeline`,applyPrompt:`Apply pipeline…`,empty:`No saved pipelines`,saveButton:`Save as pipeline`,saveTitle:`Save the current four-slot selection as a reusable pipeline`,namePlaceholder:`Pipeline name`,nameAria:`New pipeline name`,toast:{applied:`Applied "{{name}}"`,saved:`Pipeline saved`,saveFailed:`Save failed`}}},spoolman:{title:`Spoolman Integration`,enabled:`Spoolman Enabled`,url:`Spoolman URL`,connected:`Connected`,disconnected:`Not Connected`,testConnection:`Test Connection`,sync:`Sync`,syncing:`Syncing...`,lastSync:`Last Sync`,linkToSpoolman:`Link to Spoolman`,openInSpoolman:`Open in Spoolman`,unlinkSpool:`Unlink Spool`,unlinkConfirmTitle:`Unassign Spool?`,unlinkConfirmMessage:`This will remove the spool from this slot. The spool data itself will remain unchanged.`,selectSpool:`Select Spool`,noUnlinkedSpools:`No unassigned spools available`,linkSuccess:`Spool assigned successfully`,linkFailed:`Failed to assign spool`,unlinkSuccess:`Spool unassigned successfully`,unlinkFailed:`Failed to unassign spool`,linkedSpool:`Assigned spool`,spoolId:`Spool ID`,fillSourceLabel:`(Spoolman)`,weight:`Weight`,remaining:`Remaining`,disableWeightSync:`Disable AMS Estimated Weight Sync`,disableWeightSyncDesc:`Don't update remaining capacity from AMS estimates. Use this if you prefer Spoolman's usage tracking over AMS percentage-based estimates. New spools will still use the AMS estimate as their initial weight.`,reportPartialUsage:`Report Partial Usage for Failed Prints`,reportPartialUsageDesc:`When a print fails or is cancelled, report the estimated filament used up to that point based on layer progress.`},locations:{title:`Storage Locations`,subtitle:`Manage shelves, drawers, and other physical storage spots for your spools`,add:`Add Location`,addShort:`Add`,edit:`Edit Location`,name:`Name`,spools:`Spools`,sensors:`Sensors`,empty:`No storage locations yet. Create your first shelf or drawer.`,manage:`Locations`,createPlaceholder:`e.g. Shelf A, Drawer 1`,nameRequired:`Location name is required`,created:`Location created`,updated:`Location updated`,deleted:`Location deleted`,saveFailed:`Failed to save location`,deleteFailed:`Failed to delete location`,deleteBlocked:`Remove all spools from this location before deleting`,confirmDelete:`Delete "{{name}}"?`,confirmDeleteMessage:`This location will be removed from the catalog. Spools must be moved first.`,confirmDeleteMessageWithSensors:`This location will be removed from the catalog. Spools must be moved first. Connected sensors will also be deleted.`},inventory:{title:`Spool Inventory`,subtitle:`Manage your spools`,addToInventory:`Add to Inventory`,addToInventoryPending:`Adding...`,addToInventorySuccess:`Spool added to inventory`,addToInventoryFailed:`Failed to add spool to inventory`,unknownSpoolTitle:`New filament detected`,unknownSpoolMessage:`A spool with an unknown RFID tag was detected at {{location}}. Add it to your inventory now?`,unknownSpoolSlot:`Slot`,bulk:{selectAllVisible:`Select all visible`,selectRow:`Select row`,selectGroup:`Select group`,selectionCount:`{{count}} selected`,edit:`Edit`,printLabels:`Print labels`,resetUsage:`Reset usage`,restore:`Restore`,archive:`Archive`,delete:`Delete`,clearSelection:`Clear selection`,editTitle:`Bulk edit spools`,editSubtitle:`Applies to {{count}} selected spools. Only fields you tick get updated.`,editHint:`Type into a field to mark it for update — only ticked rows are sent. Leaving a field empty leaves the spools unchanged (clearing fields is per-spool only).`,useCustom:`Use "{{value}}"`,toggleField:`Toggle update for this field`,changeCount:`{{count}} fields will be updated.`,applyPending:`Applying...`,applyButton:`Apply to {{count}} spools`,deleteTitle:`Delete selected spools`,archiveTitle:`Archive selected spools`,restoreTitle:`Restore selected spools`,resetUsageTitle:`Reset usage on selected spools`,deleteMessage:`Permanently delete {{count}} spools? This cannot be undone.`,archiveMessage:`Archive {{count}} spools? They can be restored later.`,restoreMessage:`Restore {{count}} archived spools?`,resetUsageMessage:`Reset the "Total Consumed" counter on {{count}} spools? Remaining weight is preserved.`,updateSuccess:`{{count}} spools updated`,updateFailed:`Bulk update failed`,updatePartial:`{{ok}} spools updated, {{failed}} failed`,updateAllFailed:`All {{count}} spool updates failed — selection kept so you can retry`,deleteSuccess:`{{count}} spools deleted`,deleteFailed:`Bulk delete failed`,deletePartial:`{{ok}} spools deleted, {{failed}} failed`,deleteAllFailed:`All {{count}} spool deletions failed — selection kept so you can retry`,archiveSuccess:`{{count}} spools archived`,archiveFailed:`Bulk archive failed`,archivePartial:`{{ok}} spools archived, {{failed}} failed`,archiveAllFailed:`All {{count}} spool archives failed — selection kept so you can retry`,restoreSuccess:`{{count}} spools restored`,restoreFailed:`Bulk restore failed`,restorePartial:`{{ok}} spools restored, {{failed}} failed`,restoreAllFailed:`All {{count}} spool restores failed — selection kept so you can retry`,invalidHex:`Enter 6 hex characters (RRGGBB) or 8 (RRGGBBAA). The field will not be applied otherwise.`},spoolmanMixedContentTitle:`Spoolman can't load over HTTPS — mixed-content blocked by your browser`,spoolmanMixedContentBody:`Bambuddy is served over HTTPS (via your reverse proxy), but your Spoolman URL is still plain HTTP. Browsers block mixed content for security, so the embedded Spoolman UI can't render. Spoolman needs to be reachable over HTTPS for this to work.`,spoolmanMixedContentFixReverseProxy:`Put Spoolman behind the same reverse proxy as Bambuddy (Traefik / Nginx / Caddy) with HTTPS, then update the Spoolman URL in Settings to the new HTTPS address.`,spoolmanMixedContentFixOpenNewTab:`As a workaround, open Spoolman in a new browser tab over HTTP — mixed-content rules only apply to embedded frames, so a standalone tab still works.`,spoolmanOpenInNewTab:`Open Spoolman in a new tab`,labels:{title:`Print spool labels`,selectedCount:`{{count}} selected`,pickSpools:`Pick which spools to print labels for:`,monochrome:`Monochrome (black & white printer)`,monochromeHint:`Drops the colour swatch and widens the text`,startingPosition:`Starting label position`,startingPositionRange:`Sheet templates only: L7160 supports 1–21; 5160 supports 1–30.`,startingPositionInvalid:`Enter a whole number from 1 to {{capacity}}.`,startingPositionFirst:`Printing starts at position 1.`,startingPositionSkipped:`Positions 1 through {{lastPosition}} will be left blank on the first sheet.`,startingPositionRangeError:`Starting position must be between 1 and {{capacity}} for this sheet.`,searchPlaceholder:`Search name, brand, or #ID`,filterByMaterial:`Material:`,allMaterials:`All`,selectVisible:`Select all visible ({{count}})`,deselectVisible:`Deselect visible`,clearAll:`Clear all`,noSpoolsToShow:`No spools to show. Adjust your filter and try again.`,noMatches:`No spools match the current search or filter.`,printOne:`Print label for this spool`,printLabels:`Print labels…`,bulkTitle:`Pick spools to print labels for from the {{count}} currently shown`,noSpoolsTitle:`No spools to label`,error:`Could not generate labels: {{msg}}`,sortBy:{label:`Sort:`,id:`By ID`,color:`By colour`},templates:{amsHolderSmall:{label:`AMS holder — small (74 × 33 mm)`,hint:`Single label per page; matches the printable label from MakerWorld model 752566 (AMS Filament Label Holder).`},amsHolderLarge:{label:`AMS holder — large (75 × 55 mm)`,hint:`Single label per page; fits the cardstock-insert variant of the AMS Filament Label Holder. Roomy enough for swatch, brand, material, ID, and QR code.`},box40x30:{label:`Box label (40 × 30 mm)`,hint:`Single label per page; common DK/Brother roll size, good for filament-bag and storage-bin labels.`},box:{label:`Box label (62 × 29 mm)`,hint:`Single label per page; sized for Brother PT/QL and Dymo small labels.`},averyL7160:{label:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,hint:`EU sheet stock; 21 labels per A4 page.`},avery5160:{label:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,hint:`US sheet stock; 30 labels per Letter page.`}}},csv:{importButton:`Import CSV`,exportButton:`Export CSV`,modalTitle:`Import spools from CSV`,selectFile:`Choose a CSV file or drag it here`,dragHint:`Header: material (required), brand, subtype, color_name, rgba, …`,parsing:`Reading file…`,previewError:`Could not read the CSV file`,validCount:`{{count}} valid`,errorCount:`{{count}} error`,skippedCount:`{{count}} skipped`,colRow:`Row`,colStatus:`Status`,colColor:`Color`,colorResolved:`Color filled from catalog`,colorCrossMaterial:`Color taken from a different material — no exact match in catalog`,duplicateExisting:`A spool with this material, brand and color already exists — it will still be imported as a new spool`,spoolmanHint:`In Spoolman mode, use Spoolman's built-in CSV import/export.`,importValidRows:`Import {{count}} valid rows`,noValidRows:`No valid rows`,importing:`Importing…`,importSuccess:`{{count}} spools imported`,importError:`Import failed`,exportError:`Export failed`},addSpool:`Add Spool`,editSpool:`Edit Spool`,copySpool:`Copy Spool`,material:`Material`,selectMaterial:`Select material...`,subtype:`Subtype`,brand:`Brand`,searchBrand:`Search brand...`,useCustomBrand:`Use "{{brand}}"`,useCustomMaterial:`Use custom material: {{material}}`,suggestedOptions:`Suggested`,allOptions:`All`,colorName:`Color Name`,colorNamePlaceholder:`Jade White, Fire Red...`,color:`Color`,hexColor:`Hex Color`,pickColor:`Pick custom color`,labelWeight:`Label Weight`,coreWeight:`Empty Spool Weight`,searchSpoolWeight:`Search spool weight...`,weightUsed:`Used`,currentWeight:`Remaining Weight`,measuredWeight:`Measured Weight`,spoolName:`Spool`,costPerKg:`Cost per kg`,storageLocation:`Storage Location`,temperature:`Temperature`,humidity:`Humidity`,battery:`Battery`,storageLocationPlaceholder:`e.g. Shelf A, Drawer 1`,openInInventory:`Open in Inventory`,measuredWeightError:`Measured weight must be between {{min}}g and {{max}}g.`,slicerFilament:`Slicer Filament`,slicerFilamentName:`Slicer Preset Name`,slicerPreset:`Slicer Preset`,searchPresets:`Search filament presets...`,selectedPreset:`Selected`,noPresetsFound:`No presets found`,tempOverrides:`Temperature Overrides`,note:`Note`,notePlaceholder:`Any additional notes about this spool...`,category:`Category`,categoryPlaceholder:`e.g. Production, Prototype, Client A`,categoryNone:`Uncategorized`,storageLocationNone:`No location set`,lowStockThresholdOverride:`Low-stock threshold (this spool)`,lowStockThresholdOverrideHelp:`Leave blank to use the global threshold ({{global}}%).`,clearRfid:`Clear RFID Tag`,rfidCleared:`RFID tag cleared`,archive:`Archive`,restore:`Restore`,noSpools:`No spools yet. Add your first spool to get started.`,noAvailableSpools:`No spools available. Add a spool to your inventory or unassign one from another slot first.`,kProfiles:`K-Profiles`,addKProfile:`Add K-Profile`,assignSpool:`Assign Spool`,unassignSpool:`Unassign`,assignSuccess:`Spool assigned and AMS slot configured`,assignPendingInsert:`Assigned. Slot will configure when you insert the spool.`,assignFailed:`Failed to assign spool`,selectSpool:`Select a spool to assign to this slot`,assigned:`Assigned`,assigning:`Assigning...`,searchSpools:`Search spools...`,showAllSpools:`Show all spools`,spoolmanSpools:`Spoolman Spools`,allMaterials:`All Materials`,filterByBrand:`Filter by brand...`,showArchived:`Show archived`,quickAdd:`Quick Add (Stock)`,quantity:`Quantity`,stock:`Stock`,configured:`Configured`,spoolsCreated:`{{count}} spools created`,spoolsPartiallyCreated:`{{created}} of {{total}} spools created (some failed)`,spoolCreated:`Spool created`,spoolUpdated:`Spool updated`,spoolDeleted:`Spool deleted`,deepLinkSpoolNotFound:`Spool not found`,deepLinkFetchFailed:`Could not load spool — try again`,spoolArchived:`Spool archived`,spoolRestored:`Spool restored`,kProfileSaveFailed:`K-profile settings could not be saved`,syncWeightSpoolNotFound:`Spool not found — it may have been deleted`,syncWeightSpoolmanUnreachable:`Spoolman is unreachable — try again later`,syncWeightFailed:`Failed to sync weight`,spoolmanUnreachable:`Spoolman is not reachable — please try again later`,deleteSpoolNotFound:`Spool not found — it may have already been deleted`,deleteFailed:`Failed to delete spool`,archiveSpoolNotFound:`Spool not found — it may have already been deleted`,archiveFailed:`Failed to archive spool`,restoreSpoolNotFound:`Spool not found — it may have already been deleted`,restoreFailed:`Failed to restore spool`,saveFailed:`Failed to save changes`,tagClearFailed:`Failed to clear tag`,deleteConfirm:`Are you sure you want to delete this spool? This cannot be undone.`,archiveConfirm:`Are you sure you want to archive this spool?`,advancedSettings:`Advanced Settings`,filamentInfoTab:`Filament Info`,paProfileTab:`PA Profile`,colorAndCostTab:`Color & Cost`,printersTab:`Printers`,filamentInfo:`Filament`,additional:`Additional`,loadingPresets:`Loading cloud presets...`,cloudConnected:`Cloud connected`,cloudNotConnected:`Cloud not connected (using defaults)`,recentColors:`Recent`,searchColors:`Search colors...`,searchResults:`Search results`,allColors:`All colors`,commonColors:`Common colors`,showLess:`Show less`,showAll:`Show all`,noColorsFound:`No colors match your search`,noResults:`No matches found`,extraColorsLabel:`Extra colors`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Paste 2 to 8 hex stops, separated by commas. Renders as a gradient.`,extraColorsInvalid:`Ignored invalid hex: {{tokens}}`,colorEffectLabel:`Effect`,colorEffect:{none:`None`,sparkle:`Sparkle`,wood:`Wood`,marble:`Marble`,glow:`Glow`,matte:`Matte`,silk:`Silk`,galaxy:`Galaxy`,rainbow:`Rainbow`,metal:`Metal`,translucent:`Translucent`,gradient:`Gradient`,dualColor:`Dual Color`,triColor:`Tri Color`,multicolor:`Multicolor`},selectMaterialFirst:`Please select a material first in the Filament Info tab.`,noPrintersConfigured:`No printers configured. Add printers to use PA profiles.`,matchingFilter:`Matching`,anyBrand:`Any brand`,anyVariant:`Any variant`,autoSelect:`Auto-select`,matches:`matches`,match:`match`,noMatches:`No matches`,connected:`Connected`,offline:`Offline`,printerOffline:`Printer is offline. Connect to view calibration profiles.`,noKProfilesMatch:`No K-profiles match the selected filament.`,leftNozzle:`Left Nozzle`,rightNozzle:`Right Nozzle`,profilesSelected:`calibration profile(s) selected`,filamentPreset:`Filament preset`,presetUseSpoolDefault:`Use the spool's preset`,presetInherited:`inherited`,presetOverride:`override`,presetNeedsModel:`This printer has not reported its model yet, so it cannot have its own preset.`,autoMatchPresets:`Auto-match`,autoMatchPresetsHint:`Find the variant of this spool's preset that names each model`,kProfilesPerPrinter:`K profiles`,kProfileNotSet:`Not set`,kProfileFlowMismatch:`This profile was measured on a {{profile}} nozzle but a {{fitted}} nozzle is fitted, so it will not be applied`,nozzle:`Nozzle`,unknownModel:`Unknown model`,onePrinter:`1 printer`,nPrinters:`{{n}} printers`,filamentPresetsLoadFailed:`Could not load this spool's per-model presets`,filamentPresetSaveFailed:`Could not save the per-model presets`,totalInventory:`Total Inventory`,totalConsumed:`Total Consumed`,byMaterial:`By Material`,inPrinter:`In Printer`,lowStock:`Low Stock`,sinceTracking:`Since tracking started`,resetConsumedCounter:`Reset counter`,resetConsumedCounterTooltip:`Zero the consumed-grams counter for this spool. Remaining weight is not changed.`,resetConsumedCounterConfirm:`Reset this spool's consumed-grams counter to 0? Future prints will track from zero again. The spool itself, its remaining weight calculation, and your settings are not changed.`,resetAllConsumedCounters:`Reset all counters`,resetAllConsumedCountersTooltip:`Zero the consumed-grams counter on every spool. Remaining weights are not changed.`,resetAllConsumedCountersConfirm:`Reset the consumed-grams counter to 0 on all {{count}} spools (archived ones included)? This clears the "Total Consumed" stat so future prints track from zero. Spools and remaining weights are not changed.`,consumedCounterReset:`Counter reset`,allConsumedCountersReset:`Counter reset for {{count}} spool(s)`,resetConsumedCounterFailed:`Failed to reset counter`,loadedInAms:`Loaded in AMS/Ext`,remaining:`Remaining`,weightCheck:`Weight Check`,lastWeighed:`Last weighed`,neverWeighed:`Never weighed`,search:`Search spools...`,showing:`Showing`,to:`to`,of:`of`,show:`Show`,spools:`spools`,spool:`spool`,page:`Page`,noSpoolsMatch:`No results found`,noSpoolsMatchDesc:`Try adjusting your search or filters to find what you're looking for.`,active:`Active`,archived:`Archived`,all:`All`,used:`Used`,new:`New`,clearFilters:`Clear filters`,table:`Table`,cards:`Cards`,net:`Net`,groupSimilar:`Group`,groupedSpools:`{{count}} identical spools`,groupedRows:`rows`,columns:`Columns`,configureColumns:`Configure Columns`,configureColumnsDesc:`Drag to reorder columns or use arrows. Toggle visibility with the eye icon.`,visible:`visible`,reset:`Reset`,cancel:`Cancel`,applyChanges:`Apply Changes`,moveUp:`Move up`,moveDown:`Move down`,hideColumn:`Hide column`,showColumn:`Show column`,linkToSpool:`Link to Spool`,tagLinked:`Tag linked to spool`,tagLinkFailed:`Failed to link tag`,tagAlreadyLinked:`Tag already linked to spool #{{id}}`,unknownTag:`Unknown RFID tag detected`,usageHistory:`Usage History`,noUsageHistory:`No usage recorded yet`,printName:`Print Name`,weightConsumed:`Weight Consumed`,clearHistory:`Clear`,historyCleared:`Usage history cleared`,fillSourceLabel:`(Inv)`,lowStockThresholdError:`Threshold must be between 0.1 and 99.9`,assignMismatchTitle:`Material mismatch`,assignMismatchMessage:`The selected spool material "{{spoolMaterial}}" does not match the tray material "{{trayMaterial}}" for {{location}}. Assign anyway?`,assignMismatchConfirm:`Assign Anyway`,assignPartialMismatchMessage:`The spool material "{{spoolMaterial}}" is similar to but not exactly matching "{{trayMaterial}}" in {{location}}. Do you want to proceed?`,assignProfileMismatchMessage:`The spool profile "{{spoolProfile}}" does not match the tray profile "{{trayProfile}}" in {{location}}. Do you want to proceed?`,assignReconfigureNote:`The AMS slot will be reconfigured to use the spool's profile.`,spoolmanFilamentCatalog:`Spoolman Filament Catalog`,pickFromSpoolmanCatalog:`Pick from Spoolman catalog…`,spoolmanFilamentSelected:`Filament selected from Spoolman catalog`,spoolmanFilamentUnlinked:`Filament catalog link cleared`,noSpoolmanFilaments:`No filaments found in Spoolman catalog`,spoolmanFilamentColorSwatch:`Filament color`,spoolWeightManagedBySpoolman:`Empty spool weight is managed per filament type in Spoolman`,spoolmanCatalogLoadFailed:`Failed to load Spoolman filament catalog`},timelapse:{title:`Timelapse`,create:`Create Timelapse`,download:`Download`,delete:`Delete`,preview:`Preview`,frameRate:`Frame Rate`,quality:`Quality`,processing:`Processing...`,noTimelapses:`No timelapses available`},ams:{title:`AMS`,slot:`Slot`,empty:`Empty`,emptySlot:`Empty slot`,slotEmpty:`Empty`,slotUnconfigured:`?`,emptySlotReset:`No filament assigned`,unknown:`Unknown`,humidity:`Humidity`,temperature:`Temperature`,filamentType:`Filament Type`,filamentColor:`Color`,remaining:`Remaining`,history:`AMS History`,noHistory:`No history available`,configureSlot:`Configure Slot`,externalSpool:`External Spool`,profile:`Profile`,kFactor:`K Factor`,kFactorShort:`K`,fill:`Fill`,configure:`Configure`,used:`used`,remainingUnit:`remaining`},printModal:{variants:{editNote:`These alternatives were set when the job was queued. Cancel and re-queue to change them.`,title:`Printer alternatives`,help:`One job, one queue slot. The first matching printer to free up runs its file.`,unknownModel:`Unknown model`,plateFor:`Plate for {{filename}}`,moveUp:`Move up`,moveDown:`Move down`,queued:`Queued with {{count}} alternatives`},selectPrinter:`Select Printer`,selectPlate:`Select Plate`,filamentMapping:`Filament Mapping`,useArchiveMapping:`Mapping`,useArchiveMappingTooltip:`Select every slot from the AMS mapping saved with this archive (from the slicer), instead of matching by type/color.`,clickToChangeSlot:`Click to change slot assignment`,reRead:`Re-read`,plateN:`Plate {{n}}`,plateFilamentsUnreadable:`The filaments of a selected plate could not be read, so it can't be mapped. Deselect it to queue the others.`,totalCost:`Total cost:`,slotRemainingShort:` - {{grams}}g left`,printSettings:`Print Settings`,bedLeveling:`Bed Leveling`,flowCalibration:`Flow Calibration`,vibrationCalibration:`Vibration Calibration`,layerInspection:`First Layer Inspection`,timelapse:`Timelapse`,cancel:`Cancel`,noPrintersAvailable:`No printers available`,printerBusy:`Printer is busy`,printerOffline:`Printer is offline`,sameTypeDifferentColor:`Same type, different color`,filamentTypeNotLoaded:`Filament type not loaded`,statusReady:`Ready`,statusColorMismatch:`Color mismatch`,statusTypeNotFound:`Type not found`,requiredTooltip:`Required: {{name}} - {{color}}`,manuallySelected:`Manually selected`,autoMatched:`Auto-matched`,selectSlot:`Select slot`,exactColorMatch:`Exact colour match`,slotForFilament:`Printer slot for {{name}}`,overrideForFilament:`Filament override for {{name}}`,sameTypeDifferentColorDetail:`Same type, different color: needs {{required}}, slot has {{loaded}}`,requiredTypeNotInPrinter:`Required filament type not found in printer.`,whenToPrint:`When to print`,asap:`ASAP`,queue:`Queue`,schedule:`Schedule`,dateTime:`Date & Time`,invalidDateTime:`Please enter a valid date and time`,openCalendar:`Open calendar`,requireManualStart:`Require manual start`,requirePreviousSuccess:`Only start if previous print succeeded`,autoOffAfter:`Power off printer when done`,helpAsap:`Print will be added to the top of the queue and start as soon as an eligible printer is idle.`,helpSchedule:`Print will start at the scheduled time if the printer is idle. If busy, it will wait until the printer becomes available.`,helpQueue:`Print will be added to the back of the queue.`,leftNozzle:`L`,rightNozzle:`R`,leftNozzleTooltip:`Left nozzle`,rightNozzleTooltip:`Right nozzle`,ftsSameInletHint:`All filaments for this print are on Filament Track Switch IN-{{inlet}}. Switching between filaments on the same inlet is slower — move one to an AMS on the other inlet to speed it up.`,rackPosition:`Rack position`,rackPositionTooltip:`Which nozzle on the rack prints this filament. Positions are numbered as on the printer.`,rackEmptyPosition:`This rack position is empty`,rackWrongNozzle:`Holds a {{has}} nozzle; this filament needs {{needs}}`,filamentOverride:`Filament Override`,filamentOverrideHint:`Optionally override filaments for model-based assignment. The scheduler will match against your selected filaments instead of the original 3MF values.`,originalFilament:`Original`,overrideWith:`Override with`,resetToOriginal:`Reset to original`,insufficientFilamentTitle:`Not enough filament`,waitingForAmsStatus:`Waiting for AMS status from {{printer}}…`,insufficientFilamentMessage:`Some assigned spools have less filament remaining than this print needs:`,insufficientFilamentLine:`{{printer}} - {{slot}}: needs {{required}}g, remaining {{remaining}}g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: needs {{required}}g, {{remaining}}g available across matching spools (AMS Filament Backup)`,printAnyway:`Print anyway`,forceColorMatch:`Force color match`,staggerPrinterStarts:`Stagger printer starts`,staggerGroupSize:`Group size`,staggerInterval:`Interval (min)`,staggerPreview:`{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min`,staggerLastGroup:`last group: {{count}}`,staggerTotal:`total: {{minutes}} min`,staggerToPrinters:`Stagger to {{count}} printers`,gcodeInjection:`Inject auto-print G-code`,insufficientBudget:`Insufficient Budget`,unlimitedNoBudget:`Unlimited – no budget limit is set.`,noPrintableCostCenters:`No active cost center is available for printing. Ask an administrator to grant you print access.`},backup:{includesEncryptionKey:`Local backups include the MFA encryption key file (DATA_DIR/.mfa_encryption_key) so a backup ZIP is self-contained. Treat the ZIP as sensitive — anyone with the file can decrypt the OIDC client secrets and TOTP secrets stored inside.`,title:`Backup & Restore`,createBackup:`Create Backup`,restoreBackup:`Restore Backup`,restoreDescription:`Replace all data from a backup file`,downloadBackup:`Download Backup`,uploadBackup:`Upload Backup`,lastBackup:`Last Backup`,autoBackup:`Auto Backup`,backupNow:`Backup Now`,restoreWarning:`Warning: Restoring a backup will overwrite all current data.`,includeArchives:`Include Archives`,includeSettings:`Include Settings`,includeProfiles:`Include Profiles`,backupSuccess:`Backup created successfully`,restoreSuccess:`Backup restored successfully`,backupFailed:`Backup failed`,restoreFailed:`Restore failed`,restoreNote:`Virtual Printer will be stopped during restore`,githubBackup:`Git Backup`,enabled:`Enabled`,cloudLoginRequired:`Bambu Cloud login required. Sign in under Profiles → Cloud Profiles to enable GitHub backup.`,cloudLoginRequiredShort:`Cloud login required`,githubDescription:`Automatically sync your profiles to a private GitHub repository for backup and version history.`,repoIsPrivate:`Repository is private — safe to back up to.`,repoIsPublicWarning:`Repository is PUBLIC. Bambuddy backups include MQTT credentials, Home Assistant tokens, Prometheus tokens, your Bambu Cloud email, and printer access codes via K-profiles. Saving is blocked until you make the repository private in your provider's settings.`,repoVisibilityUnknown:`Could not determine repository visibility. Bambuddy refuses to back up to anything not confirmed private; saving will be blocked.`,repositoryUrl:`Repository URL`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Allow insecure HTTP`,allowInsecureHttpHint:`Enable for self-hosted instances on private networks without TLS`,personalAccessToken:`Personal Access Token`,tokenSaved:`(saved)`,enterNewToken:`Enter new token to update`,tokenHintGitHub:`Fine-grained token with Contents read and write access, or a classic token with the repo scope.`,tokenHintGitLab:`Token with the api scope, or read_repository and write_repository together.`,tokenHintGitea:`Token with the write:repository scope.`,tokenHintForgejo:`Token with the write:repository scope. A token limited to this one repository is enough.`,branch:`Branch`,provider:`Git Provider`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Manual only`,hourly:`Hourly`,daily:`Daily`,weekly:`Weekly`,includeInBackup:`Include in backup`,kProfiles:`K-Profiles`,kProfilesDescription:`Pressure advance calibration from connected printers`,noPrintersConnected:`No printers connected`,printersConnected:`{{connected}}/{{total}} connected`,cloudProfiles:`Cloud Profiles`,cloudProfilesDescription:`Filament, printer, and process presets from Bambu Cloud and Orca Cloud`,cloudProfilesAccounts:`Connected accounts — Bambu Cloud: {{bambu}}, Orca Cloud: {{orca}}`,appSettings:`App Settings`,appSettingsDescription:`Bambuddy configuration (complete database)`,spoolInventory:`Spool Inventory`,spoolInventoryDescription:`Filament spools, usage history, and cost tracking`,printArchives:`Print Archives`,printArchivesDescription:`Print history metadata (no gcode/3MF files)`,lastBackupAt:`Last backup:`,noBackupsYet:`No backups yet`,next:`Next:`,startingBackup:`Starting backup...`,test:`Test`,enableBackup:`Enable Backup`,testConnection:`Test Connection`,enterRepoUrl:`Enter repository URL`,enterRepoAndToken:`Enter repository URL and access token`,repoRequired:`Repository URL is required`,tokenRequired:`Access token is required`,githubBackupEnabled:`GitHub backup enabled`,tokenUpdated:`Token updated`,settingsSaved:`Settings saved`,failedToSave:`Failed to save: {{message}}`,backupCompleteFiles:`Backup complete - {{count}} files updated`,backupSkippedNoChanges:`Backup skipped - no changes`,backupFailed2:`Backup failed: {{message}}`,clearedLogs:`Cleared {{count}} logs`,failedToClearLogs:`Failed to clear logs: {{message}}`,restoreFromGit:{button:`Restore from Git`,title:`Restore from Git Backup`,subtitle:`Pick a commit and choose what to restore`,commitLabel:`Backup commit`,latestCommit:`Latest backup (branch tip)`,categoriesLabel:`What to restore`,inspecting:`Reading backup contents...`,itemCount:`{{count}} in backup`,overwriteLabel:`Overwrite existing entries`,overwriteOn:`Existing entries will be updated from the backup.`,overwriteOff:`Only missing entries are added; existing ones are left untouched.`,selectedCount:`{{count}} selected`,restoring:`Restoring...`,confirmTitle:`Restore from backup?`,confirmMessage:`The selected categories will be restored from this commit. Missing entries are added; existing entries stay as they are.`,confirmMessageOverwrite:`The selected categories will be restored from this commit, overwriting entries that already exist locally. This cannot be undone.`,kprofilesOverwriteCaveat:`K-profiles are the exception: writing a slot always replaces the calibration on the printer.`,tally:`{{restored}} restored, {{skipped}} skipped, {{failed}} failed`,reloadHint:`Reload Bambuddy so the restored data appears everywhere.`,partialHint:`The categories listed above finished and are on disk. Any that are missing did not run.`,failed:`Restore failed.`,loadFailed:`Could not read the backup repository.`,details:{notPresent:`Not present in this backup commit`,unreadableJson:`Unreadable JSON: {{paths}}`,settingsNoPayload:`No settings in payload`,settingsCredentialsWillSkip:`{{count}} credential-like key(s) will be skipped`,settingsCompanionWillSkip:`{{count}} credential-like key(s) will be skipped, and {{companion}} switch(es) that depend on them will be left off`,settingsCompanionOnlyWillSkip:`{{companion}} switch(es) will be left off - the credential each one needs cannot be restored from a backup`,spoolsUsageCount:`including {{count}} usage record(s)`,archivesMetadataOnly:`Metadata only - 3MF files and thumbnails are not in a Git backup`,kprofilesPrinterCount:`across {{count}} printer(s)`},notes:{noData:`No data of this kind in this backup`,archivesPrinterMissing:`Some archives referenced printers that no longer exist - link cleared`,archivesProjectMissing:`Some archives referenced projects that no longer exist - link cleared`,archivesOwnerCleared:`Some archives referenced users that no longer exist - owner cleared, so they are visible only to users with the archives:read_all permission until an admin reassigns them`,archivesOwnerUnmatched:`Some archives name an owner this instance does not have - owner cleared rather than guessed from the backup's user id, so they are visible only to users with the archives:read_all permission until an admin reassigns them`,archivesOwnerUnknown:`Some archives were restored without an owner - this backup does not record one, so they are visible only to users with the archives:read_all permission until an admin reassigns them`,archivesUndeleted:`Archive(s) deleted since the backup are visible again - overwrite was on`,archivesMetadataOnly:`Restored archives carry metadata only - the 3MF and thumbnail files are not in a Git backup`,spoolUsageUnresolved:`{{count}} usage record(s) skipped - their spool is not in this backup's spool list, so there is nothing to attach them to.`,spoolUsageUnlinked:`{{count}} usage record(s) restored without their print-history link - select Print archives alongside Spool inventory to keep it.`,spoolTagKept:`{{count}} spool tag(s) left as they are - the backup would have cleared a tag that has since been scanned, or moved one onto a second spool.`,settingsCredentialsSkipped:`{{count}} credential-like key(s) skipped - re-enter secrets manually`,settingsAuthSkipped:`{{count}} authentication setting(s) skipped - change those in Settings > Authentication so the lockout checks still run`,settingsCompanionSkipped:`{{keys}} left switched off - the credential each one needs cannot be restored from a backup and this instance has none stored, so switching them on would leave the integration unauthenticated`,settingsMqttRelayFailed:`MQTT settings restored, but the relay could not be reconnected - restart Bambuddy`,kprofilesAlwaysOverwrite:`K-profiles always overwrite the matching slot on the printer`,kprofilesAckUnreliable:`A printer that does not answer still counts as restored - verify the profiles on the printer`,kprofilesPrinterMissing:`No printer with serial {{serial}} - skipped`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) is not connected - skipped`,kprofilesUnknownNozzle:`Unexpected nozzle diameter {{nozzle}} for {{serial}} - sent as-is`,kprofilesUnmatched:`{{count}} profile(s) for {{nozzle}} had no counterpart on {{printer}} - added as new profiles`,kprofilesSendFailed:`Failed to send {{nozzle}} profiles to {{printer}} ({{serial}})`,kprofilesRefused:`{{printer}} ({{serial}}) refused the {{nozzle}} profiles: {{reason}}`,kprofilesStepFailed:`The K-profile step could not be completed - {{reason}}. Anything restored before it is still saved.`}},history:`History`,clear:`Clear`,date:`Date`,status:`Status`,trigger:`Type`,triggers:{manual:`Backup (manual)`,scheduled:`Backup (scheduled)`,restore:`Restore`},commit:`Commit`,localBackup:`Local Backup`,localBackupDescription:`Create a complete backup of your Bambuddy data including the database, archives, uploads, and all files.`,downloadBackupLabel:`Download Backup`,completeBackupZip:`Complete backup: database + all files (ZIP)`,download:`Download`,preparingBackup:`Preparing backup...`,creatingArchive:`Creating backup archive... This may take a while for large archives.`,downloadingFile:`Downloading backup file...`,backupDownloaded:`Backup downloaded successfully`,failedToCreateBackup:`Failed to create backup: {{message}}`,restore:`Restore`,restoreReplacesAll:`Restore replaces all data.`,restoreReplacesAllDetail:`Your current database and files will be completely replaced. A restart is required after restore.`,restoreConfirmTitle:`Restore Backup`,restoreConfirmMessage:`Are you sure you want to restore from "{{filename}}"? This will completely replace your current database and all files. The application will need to be restarted after restore.`,restoreConfirmButton:`Restore Backup`,uploadingFile:`Uploading backup file...`,backupRestoredRestart:`Backup restored. Please restart Bambuddy.`,failedToRestore:`Failed to restore backup. Please check the file format.`,reloadNow:`Reload Now`,creatingBackup:`Creating Backup`,restoringBackup:`Restoring Backup`,preparing:`Preparing...`,processing:`Processing...`,doNotClosePage:`Please do not close this page or navigate away. This operation may take several minutes for large backups.`,restoring:`Restoring...`,restoreComplete:`Restore Complete`,restoreFailed2:`Restore Failed`,importSettings:`Import settings from a backup file`,pleaseWaitRestoring:`Please wait while your data is being restored`,selectBackupFile:`Click to select backup file (.json or .zip)`,duplicateHandling:`How duplicate handling works:`,matchPrinters:`Printers`,matchPrintersBy:`matched by serial number`,matchSmartPlugs:`Smart Plugs`,matchSmartPlugsBy:`matched by IP address`,matchNotificationProviders:`Notification Providers`,matchNotificationProvidersBy:`matched by name`,matchFilaments:`Filaments`,matchFilamentsBy:`matched by name + type + brand`,matchArchives:`Archives`,matchArchivesBy:`matched by content hash (always skipped)`,matchPendingUploads:`Pending Uploads`,matchPendingUploadsBy:`matched by filename`,matchSettingsTemplates:`Settings & Templates`,matchSettingsTemplatesBy:`always overwritten`,replaceExisting:`Replace existing data`,keepExisting:`Keep existing data`,overwriteDescription:`Overwrite items that already exist with backup data`,keepDescription:`Only restore items that don't already exist`,overwriteCaution:`Caution:`,overwriteWarning:`Overwriting will replace your current configurations with data from the backup. Printer access codes are never overwritten for security.`,cancel:`Cancel`,processingBackup:`Processing backup file...`,itemsRestored:`Items Restored`,itemsSkipped:`Items Skipped`,restored:`Restored`,skippedAlreadyExist:`Skipped (already exist)`,filesCategory:`Files (3MF, thumbnails, etc.)`,andMore:`...and {{count}} more`,newApiKeysGenerated:`New API Keys Generated`,keysShownOnce:`These keys are only shown once. Copy them now!`,copy:`Copy`,noDataFound:`No data was found to restore in the backup file.`,close:`Close`,scheduledBackup:`Scheduled Backups`,scheduledBackupDescription:`Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.`,frequency:`Frequency`,backupTime:`Time`,retention:`Retention`,retentionDescription:`Number of backups to keep`,outputPath:`Output Path`,outputPathPlaceholder:`Default: {{path}}`,outputPathDescription:`Leave empty for default location`,runNow:`Run Now`,backupFiles:`Backup Files`,noScheduledBackups:`No backups yet`,deleteBackup:`Delete`,deleteBackupConfirm:`Delete this backup file?`,backupRunning:`Backup in progress...`,scheduledBackupComplete:`Backup completed successfully`,scheduledBackupFailed:`Backup failed`,nextBackup:`Next backup`,backupSize:`Size`,localTimeHint:`Local time ({{tz}})`,defaultPathLabel:`Default:`,pathCheck:{title:`Bambuddy cannot write to this directory`,howToFix:`How to fix:`,sandboxed:`The Bambuddy service cannot write to {{path}}. Its systemd unit runs with ProtectSystem=strict, which makes every directory outside the install, data and log directories read-only for the service - even one you can write to from your own shell.`,read_only:`{{path}} is on a read-only filesystem.`,permission_denied:`Bambuddy is not allowed to write to {{path}}. Check the directory owner and permissions.`,no_space:`The filesystem holding {{path}} is full.`,not_a_directory:`{{path}} exists but is not a directory.`,missing:`{{path}} does not exist and could not be created.`,error:`Bambuddy cannot write to {{path}}.`,ephemeralTitle:`These backups will not survive a container restart`,container_ephemeral:`{{path}} is inside the Bambuddy container, not on the host. Backups written there are lost when the container is recreated. Mount the directory from the host:`},categories:{settings:`Settings`,notification_providers:`Notification Providers`,notification_templates:`Notification Templates`,smart_plugs:`Smart Plugs`,printers:`Printers`,filaments:`Filaments`,maintenance_types:`Maintenance Types`,archives:`Archives`,projects:`Projects`,pending_uploads:`Pending Uploads`,external_links:`External Links`,api_keys:`API Keys`}},tags:{title:`Tags`,addTag:`Add Tag`,editTag:`Edit Tag`,deleteTag:`Delete Tag`,tagName:`Tag Name`,tagColor:`Tag Color`,noTags:`No tags`,deleteConfirm:`Are you sure you want to delete this tag?`,manageTags:`Manage Tags`},uploadModal:{title:`Upload 3MF Files`,dragDrop:`Drag & drop .3mf files here`,or:`or`,browseFiles:`Browse Files`,extractionInfo:`The printer model will be automatically extracted from the 3MF file metadata.`,uploaded:`uploaded`,failed:`failed`,uploading:`Uploading...`,upload:`Upload`,uploadFailed:`Upload failed`},editArchive:{title:`Edit Archive`,name:`Name`,namePlaceholder:`Print name`,printer:`Printer`,noPrinter:`No printer`,project:`Project`,noProject:`No project`,itemsPrinted:`Items Printed`,itemsPrintedHelp:`Number of items produced in this print job. Use 0 if the whole plate was ruined.`,filamentUsed:`Filament used (g)`,filamentUsedPlaceholder:`e.g. 46.16`,filamentUsedHelp:`Set this by hand when a print archived without its 3MF, so it still counts towards the filament totals. Rescanning an archive that has its 3MF reads the figure back from the file.`,notes:`Notes`,notesPlaceholder:`Add notes about this print...`,externalLink:`External Link`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Link to Printables, Thingiverse, or other source`,tags:`Tags`,tagsPlaceholder:`Add tags...`,addMoreTags:`Add more tags...`,matchingTags:`Matching "{{query}}"`,existingTags:`Existing tags`,clickToAdd:`(click to add)`,status:`Status`,failureReason:`Failure Reason`,selectReason:`Select reason...`,photos:`Photos of Printed Result`,photosHelp:`Click + to add photos of your printed result`,printResult:`Print result`,saving:`Saving...`,failureReasons:{adhesionFailure:`Adhesion failure`,spaghettiDetached:`Spaghetti / Detached`,layerShift:`Layer shift`,cloggedNozzle:`Clogged nozzle`,filamentRunout:`Filament runout`,warping:`Warping`,stringing:`Stringing`,underExtrusion:`Under-extrusion`,powerFailure:`Power failure`,userCancelled:`User cancelled`,noStatusUpdate:`No status update received`,other:`Other`},statuses:{completed:`Completed`,failed:`Failed`,aborted:`Cancelled`,printing:`Printing`}},kProfiles:{title:`K-Profiles`,noPrintersConfigured:`No Printers Configured`,addPrinterInSettings:`Add a printer in Settings to manage K-profiles`,noActivePrinters:`No Active Printers`,enablePrinterConnection:`Enable a printer connection to view its K-profiles`,loadingProfiles:`Loading K-Profiles...`,printerOffline:`Printer Offline`,printerOfflineDesc:`The selected printer is not connected. Power it on to view K-profiles.`,noMatchingProfiles:`No Matching Profiles`,noMatchingProfilesDesc:`No profiles match your search criteria`,noKProfiles:`No K-Profiles`,noKProfilesDesc:`No pressure advance profiles found for {{diameter}}mm nozzle`,createFirstProfile:`Create First Profile`,printer:`Printer`,nozzle:`Nozzle`,refresh:`Refresh`,addProfile:`Add Profile`,export:`Export`,import:`Import`,select:`Select`,selectAll:`Select All`,delete:`Delete`,searchPlaceholder:`Search by name or filament...`,allExtruders:`All Extruders`,leftOnly:`Left Only`,rightOnly:`Right Only`,allFlow:`All Flow`,hfOnly:`HF Only`,sOnly:`S Only`,sortName:`Sort: Name`,sortKValue:`Sort: K-Value`,sortFilament:`Sort: Filament`,leftExtruder:`Left Extruder`,rightExtruder:`Right Extruder`,modal:{addTitle:`Add K-Profile`,editTitle:`Edit K-Profile`,profileName:`Profile Name`,profileNamePlaceholder:`My PLA Profile`,kValue:`K-Value`,kValuePlaceholder:`0.020`,kValueHelp:`Typical range: 0.01 - 0.06 for PLA, 0.02 - 0.10 for PETG`,filament:`Filament`,selectFilament:`Select filament...`,source:{local:`Imported`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Built-in`},noFilamentsHelp:`No filaments available. Sign in to Bambu Cloud, or import presets under Profiles → Local Profiles.`,searchFilaments:`Search filaments...`,noFilamentMatches:`No filament matches that search`,flowType:`Flow Type`,highFlow:`High Flow`,standard:`Standard`,nozzleSize:`Nozzle Size`,extruder:`Extruder`,extruders:`Extruders`,left:`Left`,right:`Right`,notes:`Notes (stored locally)`,notesPlaceholder:`Add notes about this profile...`,notesHelp:`Notes are saved in Bambuddy, not on the printer`,syncing:`Syncing with printer...`,savingExtruder:`Saving to extruder {{current}}/{{total}}...`,pleaseWait:`Please wait`},deleteConfirm:{title:`Delete Profile`,cannotUndo:`This cannot be undone`,message:`Are you sure you want to delete "{{name}}" from the printer?`},bulkDelete:{title:`Delete Profiles`,cannotUndo:`This cannot be undone`,message:`Are you sure you want to delete {{count}} selected profiles from the printer?`},toast:{profileSaved:`K-profile saved`,profilesSaved:`K-profile saved to {{count}} extruders`,selectAtLeastOneExtruder:`Please select at least one extruder`,selectFilament:`Select a filament first`,filamentNotResolvable:`No Bambu filament ID for {{name}} — the printer cannot store a profile for it`,profileDeleted:`K-profile deleted`,profilesDeleted:`Deleted {{count}} profiles`,exportedProfiles:`Exported {{count}} profiles`,importedProfiles:`Imported {{count}} of {{total}} profiles`,noProfilesToExport:`No profiles to export`,invalidFileFormat:`Invalid file format`,failedToParseImport:`Failed to parse import file`,failedToSaveBatch:`Failed to save K-profiles`,noteSaved:`Note saved`,failedToSaveNote:`Failed to save note`},permission:{noRead:`You do not have permission to refresh profiles`,noCreate:`You do not have permission to add profiles`,noUpdate:`You do not have permission to update K-profiles`,noDelete:`You do not have permission to delete K-profiles`,noExport:`You do not have permission to export profiles`,noImport:`You do not have permission to import profiles`}},virtualPrinter:{title:`Virtual Printer`,running:`Running`,stopped:`Stopped`,description:{default:`Enable a virtual printer that appears in Bambu Studio and OrcaSlicer. Files sent to this printer will be archived directly without printing.`,proxy:`Enable a proxy that relays slicer traffic to a real printer, allowing remote printing over any network.`},enable:{title:`Enable Virtual Printer`,visibleInSlicer:`Visible as "Bambuddy" in slicer discovery`,proxyingTo:`Proxying to {{name}}`,notActive:`Not active`},model:{title:`Printer Model`,description:`Select which printer model to emulate.`,restartWarning:`Changing the model will restart the virtual printer`},accessCode:{title:`Access Code`,isSet:`Access code is set`,notSet:`No access code set - required to enable`,placeholder:`Enter 8-char code`,placeholderChange:`Enter new code to change`,hint:`Must be exactly 8 characters. Used by slicers to authenticate.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Inherited from target`,derivedFromTargetHint:`Uses the target printer's access code. The bridge forwards slicer auth to the real printer, so the codes must match — edit the printer's access code to change this value.`,reveal:`Show access code`,hide:`Hide access code`},targetPrinter:{title:`Target Printer`,configured:`Proxy target configured`,notConfigured:`No target printer selected - required for proxy mode`,placeholder:`Select a printer...`,hint:`Select the printer to proxy slicer traffic to. The printer must be in LAN mode.`,noPrinters:`No printers configured. Add a printer first to use proxy mode.`},remoteInterface:{title:`Network Interface Override`,configured:`Interface override active`,optional:`Optional - use if auto-detected IP is wrong (e.g. multiple NICs, Docker, VPN)`,placeholder:`Auto-detect (default)...`,hint:`Override the IP address advertised via SSDP and used in the TLS certificate. Useful when Bambuddy has multiple network interfaces.`},mode:{title:`Mode`,archive:`Archive`,archiveDesc:`Archive files immediately`,review:`Review`,reviewDesc:`Review before archiving`,queue:`Queue`,queueDesc:`Archive and add to queue`,proxy:`Proxy`,proxyDesc:`Relay to real printer`},autoDispatch:{title:`Auto-dispatch`,description:`Automatically start prints when added to queue. When off, prints wait for manual dispatch.`},queueForceColorMatch:{title:`Force color match`,description:`Refuse to dispatch onto a printer that does not have the exact filament type and color loaded. Off by default — without this, the queue uses model-only matching and may pick a printer with the wrong color loaded.`},saveAmsMapping:{title:`Save AMS mapping`,description:`Persist the slicer's own AMS-slot pick (from the project_file MQTT command) onto the archive, so a later reprint reuses the exact physical spool instead of re-deriving one from the file's type/color. Off by default.`},gcodeInjection:{title:`G-code injection`,description:`Apply the per-model G-code snippets configured in Settings to jobs from this VP. Off by default.`},tailscaleDisabled:{title:`Tailscale integration`,description:`Enable to mark this VP as exposed over Tailscale. Shows the host's Tailscale address so you know which IP to paste into the slicer. The CA-import step is unchanged — this toggle has no effect on certificates.`},setupRequired:{title:`Setup Required`,description:`The virtual printer feature requires additional system configuration before it will work. This includes port forwarding, firewall rules, and platform-specific settings.`,readGuide:`Read the setup guide before enabling`},archiveNameSource:{title:`Archive name source`,description:`Choose how new archives are named when files arrive via the virtual printer. "Metadata" uses the slicer-embedded Title from the 3MF (default). "Filename" uses the filename Bambu Studio sent over FTP. Note: Bambu Studio overwrites the name you type in the "send to printer" dialog with the 3MF's Title field whenever one is present, so both modes often produce the same string.`,metadata:`Metadata`,filename:`Filename`},caCert:{title:`Slicer certificate`,description:`Virtual printers use a TLS certificate signed by the Bambuddy CA. Import this CA certificate into your slicer's trust store once so it accepts the connection — no need to copy it from the command line.`,copy:`Copy`,copied:`Copied`,download:`Download`,fingerprint:`SHA-256`},howItWorks:{title:`How it works`,step1:`On the same LAN, virtual printers appear in your slicer (Bambu Studio / OrcaSlicer) automatically via discovery. From other networks, add them manually by IP address and access code.`,step2:`In Archive, Review, and Queue modes, use the "Send" button in your slicer to upload 3MF files to Bambuddy. The slicer will show "Print success" — the file is stored, not printed.`,step3:`In Proxy mode, the virtual printer relays all traffic to a real printer — prints start immediately as if connected directly.`},status:{title:`Status Details`,printerName:`Printer Name`,model:`Model`,serialNumber:`Serial Number`,mode:`Mode`,pendingFiles:`Pending Files`,targetPrinter:`Target Printer`,ftpPort:`FTP Port`,mqttPort:`MQTT Port`,ftpConnections:`FTP Connections`,mqttConnections:`MQTT Connections`},toast:{updated:`Virtual printer settings updated`,failedToUpdate:`Failed to update settings`,copyFailed:`Failed to copy — try selecting the text manually`,accessCodeRequired:`Please set an access code first`,targetPrinterRequired:`Please select a target printer first`,bindIpRequired:`Please set a bind IP first`,accessCodeEmpty:`Access code cannot be empty`,accessCodeLength:`Access code must be exactly 8 characters`,targetCodeChangedRebind:`Access code now matches the new target printer. Re-add this device in your slicer to pick up the new code.`,created:`Virtual printer created`,failedToCreate:`Failed to create virtual printer`,deleted:`Virtual printer deleted`,failedToDelete:`Failed to delete virtual printer`},list:{title:`Virtual Printers`,add:`Add`,addFirst:`Add Virtual Printer`,empty:`No virtual printers configured. Add one to get started.`},bindIp:{title:`Bind Interface`,placeholder:`Select interface...`,hint:`Network interface for this virtual printer to bind to. Must be unique per printer.`},proxy:{accessCodeHint:`In proxy mode, use your target printer's access code in the slicer. The connection is forwarded transparently to the real printer.`},addDialog:{title:`Add Virtual Printer`,name:`Name`,hint:`You can configure access code, target printer, and other settings after creating.`,create:`Create`},deleteConfirm:{title:`Delete Virtual Printer`,message:`Are you sure you want to delete "{{name}}"? This will stop all services for this printer.`}},modelViewer:{openInSlicer:`Open in Slicer`,openInSlicerWith:`Open in {{slicer}}`,moreSlicerOptions:`More slicer options`,openInSlicerFailed:`Could not open in slicer`,tabs:{model:`3D Model`},notAvailable:`not available`,plates:`Plates`,allPlates:`All Plates`,plateNumber:`Plate {{number}}`,plateCount:`{{count}} plate`,plateCount_other:`{{count}} plates`,objectCount:`{{count}} object`,objectCount_other:`{{count}} objects`,filamentCount:`{{count}} filament`,filamentCount_other:`{{count}} filaments`,eta:`ETA {{minutes}} min`,noPreview:`No preview available for this file`,pagination:{pageOf:`Page {{current}} of {{total}}`,prev:`Prev`,next:`Next`},errors:{failedToLoad:`Failed to load file`,noMeshes:`No meshes found in 3MF file`,unsupportedFormat:`Unsupported file format`}},maintenanceDescriptions:{lubricateCarbonRods:`Apply lubricant to carbon rods for smooth motion`,lubricateRails:`Apply lubricant to linear rails for smooth motion`,cleanNozzle:`Clean hotend and nozzle to prevent clogs`,checkBelts:`Verify belt tension for accurate prints`,cleanBuildPlate:`Clean build plate for better adhesion`,checkExtruder:`Inspect extruder gears for wear`,checkCooling:`Ensure cooling fans are working properly`,generalInspection:`General printer inspection`,cleanCarbonRods:`Clean carbon rods to reduce friction`,lubricateSteelRods:`Apply lubricant to steel rods for smooth motion`,cleanSteelRods:`Clean steel rods to reduce friction`,cleanLinearRails:`Wipe linear rails to remove dust and debris`,checkPtfeTube:`Inspect PTFE tube for wear or damage`,replaceHepaFilter:`Replace HEPA filter for air quality`,replaceCarbonFilter:`Replace activated carbon filter`,lubricateLeftNozzleRail:`Lubricate left nozzle rail (H2 series)`},haSensors:{label:`Sensors`,unavailable:`Unavailable`,blocksPrints:`{{entity}} — holds prints while alerting`,states:{open:`Open`,closed:`Closed`,unlocked:`Unlocked`,locked:`Locked`,detected:`Detected`,clear:`Clear`,wet:`Wet`,dry:`Dry`,problem:`Problem`,ok:`OK`,running:`Running`,stopped:`Stopped`,on:`On`,off:`Off`},sectionTitle:`Home Assistant Sensors (Printers)`,add:`Add Sensor`,addTitle:`Add Home Assistant Sensor`,editTitle:`Edit Home Assistant Sensor`,empty:`No sensors yet. Bind a door contact or a thermometer from Home Assistant to show it on a printer card.`,unknownPrinter:`Unknown printer`,badgeBlocks:`Holds prints`,badgeNotifies:`Notifies`,badgeHidden:`Hidden on card`,printer:`Printer`,entity:`Entity`,searchPlaceholder:`Search entities...`,noEntities:`No matching entities`,name:`Display name`,alertWhen:`Alert when`,alertNever:`Never — display only`,alertAbove:`Above`,alertBelow:`Below`,alertHint:`The alert state highlights the sensor on the printer card and enables the options below.`,showOnCard:`Show on printer card`,notifyOnAlert:`Send a notification when it starts alerting`,blockPrint:`Hold queued prints while alerting`,blockPrintHint:`Jobs stay queued and start on their own once the sensor clears. Ignored while Home Assistant is unreachable.`,toast:{created:`Sensor added`,updated:`Sensor saved`,deleted:`Sensor removed`},error:{pickEntity:`Pick a Home Assistant entity`,nameRequired:`Enter a display name`,printerRequired:`Pick a printer`,alertRequired:`Set an alert condition first`}},locationHaSensors:{sectionTitle:`Home Assistant Sensors (Storage Locations)`,sectionDescription:`Bind Home Assistant temperature, humidity, or battery sensors to your storage locations to show live readings on the filament card and in the table. Only one sensor per category is allowed per location.`,add:`Add Sensor`,addTitle:`Add Home Assistant Sensor`,editTitle:`Edit Home Assistant Sensor`,empty:`No sensors yet. Bind a temperature or humidity sensor from Home Assistant to show it on the filament card.`,unknownLocation:`Unknown location`,location:`Storage Location`,showOnCard:`Show on filament card`,overwriteConfirm:{title:`Replace existing sensor?`,messageTemperature:`"{{location}}" already has a temperature sensor bound: {{name}}. Continuing will replace it.`,messageHumidity:`"{{location}}" already has a humidity sensor bound: {{name}}. Continuing will replace it.`,messageBattery:`"{{location}}" already has a battery sensor bound: {{name}}. Continuing will replace it.`},autoAdd:{confirmTitle:`Add the other sensors too?`,confirmMessage:`Bambuddy also found other sensors for this location. Choose which ones to add too.`,added:`Also added: {{names}}`,noneFound:`No matching temperature, humidity, or battery sensors found for this location.`,onlyThisOne:`Only this one`},options:{buttonLabel:`Sensor options`,title:`Location Sensor Options`,description:`These values are used when a temperature, humidity, or battery sensor is bound automatically alongside the first sensor for a location.`,generalSettings:`General settings`,pollInterval:`Update interval (seconds)`,pollIntervalHint:`How often Bambuddy polls Home Assistant and refreshes sensor values on screen. Minimum 60 seconds.`,colorizeValues:`Colorize sensor values against their alert thresholds`,aboveColor:`Above threshold color`,belowColor:`Below threshold color`,optimalColor:`Optimal value color`,colors:{red:`Red`,orange:`Orange`,yellow:`Yellow`,green:`Green`,blue:`Blue`,purple:`Purple`,pink:`Pink`},saved:`Options saved`,saveFailed:`Failed to save options`,reset:`Reset`,resetConfirm:{title:`Reset all existing location sensors?`,message:`This overwrites the alert thresholds, notifications, and card visibility of every existing storage-location temperature, humidity, and battery sensor with the values configured above, and restores each sensor's name to its Home Assistant friendly name — printer sensors are not affected. This cannot be undone. Depending on how many sensors you have, this may take a moment.`},resetDone:`Applied to {{count}} location sensors`,resetFailed:`Failed to reset location sensors`},deleteAllConfirm:{title:`Delete all sensors?`,message:`This removes all {{count}} sensors bound to "{{location}}". This cannot be undone.`},currentlyBound:`Currently bound: {{entity}}`,error:{locationRequired:`Pick a storage location`},toast:{created:`Sensor added`,updated:`Sensor saved`,deleted:`Sensor removed`}},smartPlugs:{offline:`Offline`,admin:`Admin`,openPlugAdminPage:`Open plug admin page`,deleteSmartPlug:`Delete Smart Plug`,turnOnSmartPlug:`Turn On Smart Plug`,turnOffSmartPlug:`Turn Off Smart Plug`,turnOn:`Turn On`,turnOff:`Turn Off`,addSmartPlug:{scanningNetwork:`Scanning network...`,chooseEntity:`Choose an entity...`,connectionFailed:`Connection failed`,searchEntities:`Search entities...`,searchPowerSensors:`Search power sensors...`,searchEnergySensors:`Search energy sensors...`,placeholders:{plugName:`Living Room Plug`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Same as power topic, or different`}},linkedTo:`Linked to:`,monitorOnly:`Monitor Only`,alerts:`Alerts`,scheduleOn:`On {{time}}`,scheduleOff:`Off {{time}}`,on:`On`,off:`Off`,power:`Power`,kwhToday:`kWh Today`,settings:`Settings`,automationSettings:`Automation Settings`,showInSwitchbar:`Show in Switchbar`,quickAccessSidebar:`Quick access from sidebar`,enabled:`Enabled`,enableAutomation:`Enable automation for this plug`,autoOn:`Auto On`,autoOnDescription:`Turn on when print starts`,autoOff:`Auto Off`,autoOffDescription:`Turn off when print completes (one-shot)`,autoOffPersistent:`Keep Enabled`,autoOffPersistentDescription:`Stay enabled between prints instead of one-shot`,controlsPrinterPower:`Powers the printer`,controlsPrinterPowerDescription:`Turn off if this plug only powers an accessory (filter fan, lights). Otherwise switching it off marks the printer offline.`,autoOffAfterDrying:`Auto Off After Drying`,autoOffAfterDryingDescription:`Turn off when AMS drying completes`,delayAfterDryingMinutes:`Drying delay (minutes)`,turnOffDelayMode:`Turn Off Delay Mode`,time:`Time`,temp:`Temp`,delayMinutes:`Delay (minutes)`,tempThreshold:`Temperature threshold (°C)`,tempThresholdDescription:`Turns off when nozzle cools below this temperature`,edit:`Edit`,deleteConfirm:`Are you sure you want to delete "{{name}}"? This cannot be undone.`,turnOnConfirm:`Are you sure you want to turn on "{{name}}"?`,turnOffConfirm:`Are you sure you want to turn off "{{name}}"? This will cut power to the connected device.`,failedToTurn:`Failed to turn {{action}} "{{name}}"`,unknown:`Unknown`,addTitle:`Add Smart Plug`,editTitle:`Edit Smart Plug`,stopScanning:`Stop Scanning`,discoverTasmota:`Discover Tasmota Devices`,foundDevices:`Found {{count}} device(s) - click to select:`,noDevicesFound:`No Tasmota devices found on your network`,haNotConfigured:`Home Assistant is not configured. Set it up in`,haSettingsPath:`Settings → Network → Home Assistant`,selectEntity:`Select Entity *`,ipAddress:`IP Address *`,nameLabel:`Name *`,username:`Username`,password:`Password`,authHint:`Leave empty if your Tasmota device doesn't require authentication`,linkToPrinter:`Link to Printer`,noPrinter:`No printer (manual control only)`,linkingDescription:`Linking enables automatic on/off when prints start/complete`,powerAlerts:`Power Alerts`,alertAbove:`Alert if above (W)`,alertBelow:`Alert if below (W)`,alertDescription:`Get notified when power consumption crosses these thresholds. Leave empty to disable that direction.`,dailySchedule:`Daily Schedule`,turnOnAt:`Turn On at`,turnOffAt:`Turn Off at`,scheduleDescription:`Automatically turn the plug on/off at these times daily. Leave empty to skip that action.`,showOnPrinterCard:`Show on Printer Card`,displayOnPrinterCard:`Display button on printer card`,connectedResult:`Connected!`,deviceLabel:`Device: {{name}} - `,stateLabel:`State: {{state}}`,test:`Test`,delete:`Delete`,save:`Save`,add:`Add`,cancel:`Cancel`,failedToStartScan:`Failed to start scan`,nameRequired:`Name is required`,entityRequired:`Entity is required for Home Assistant plugs`,mqttTopicRequired:`At least one MQTT topic must be configured for power, energy, or state monitoring`,loadingEntities:`Loading entities...`,loading:`Loading...`,failedToLoadEntities:`Failed to load entities: {{error}}`,noEntitiesMatching:`No entities found matching "{{search}}"`,noEntitiesAvailable:`No entities available`,searchingEntities:`Searching all entities ({{count}} found)`,showingEntities:`Showing switch, light, input_boolean ({{count}} available)`,energyMonitoringOptional:`Energy Monitoring (Optional)`,energyMonitoringHint:`Search and select sensors that provide power/energy data.`,powerSensorW:`Power Sensor (W)`,energyTodayKwh:`Energy Today (kWh)`,totalEnergyKwh:`Total Energy (kWh)`,noMatchingSensors:`No matching sensors`,none:`None`,mqttNotConfigured:`MQTT broker not configured. Set broker address in`,mqttSettingsPath:`Settings → Network → MQTT Publishing`,mqttNotConfiguredSuffix:`(you don't need to enable publishing, just fill in the broker details).`,mqttMonitorOnlyDescription:`MQTT plugs receive power/energy data via MQTT subscription. On/off control is not available - use your MQTT broker or home automation system.`,powerMonitoring:`Power Monitoring`,energyMonitoring:`Energy Monitoring`,stateMonitoring:`State Monitoring`,optional:`optional`,topic:`Topic`,jsonPath:`JSON Path`,multiplier:`Multiplier`,onValue:`ON Value`,mqttPowerHint:`JSON path extracts value from JSON payload (e.g., "power_l1"). Leave empty if topic publishes raw numeric values.
 Use multiplier 0.001 for mW→W, 1000 for kW→W.`,mqttEnergyHint:`JSON path extracts value from JSON payload. Leave empty for raw values.
 Use multiplier 0.001 for Wh→kWh, 1000 for MWh→kWh.`,mqttStateHint:`JSON path extracts value from JSON payload. Leave empty for raw values.
-ON value: the exact string that means "ON". Leave empty for auto-detect (ON, true, 1).`,restControl:`Control`,restOnUrl:`Turn ON URL`,restOffUrl:`Turn OFF URL`,restOnBody:`ON Request Body`,restOffBody:`OFF Request Body`,restMethod:`HTTP Method`,restHeaders:`Custom Headers (JSON)`,restStatusUrl:`Status URL`,restStatusPath:`State JSON Path`,restStatusOnValue:`ON Value`,restPowerUrl:`Power URL`,restPowerPath:`Power JSON Path`,restPowerMultiplier:`Power Multiplier`,restEnergyUrl:`Energy URL`,restEnergyPath:`Energy JSON Path (today)`,restEnergyTotalPath:`Energy JSON Path (lifetime)`,restEnergyTotalMultiplier:`Lifetime Multiplier`,restEnergyTotalPathHint:`e.g. aenergy.total`,restEnergyTotalHint:`Many plugs — every Shelly among them — report only a lifetime counter that never resets. It belongs here, not in the field above: read as today's usage it would never reset at midnight, and Yesterday and Total would stay empty. Bambuddy works Today and Yesterday out from it, which takes a day or two of readings to fill in. A Shelly reports watt-hours, so use a multiplier of 0.001.`,restEnergyMultiplier:`Energy Multiplier`,restUrlRequired:`At least one URL (ON or OFF) is required for REST plugs`,restHeadersHint:`e.g. {"Authorization": "Bearer your-token"}`,restBodyHint:`e.g. ON, {"state": "on"}`,restStatusHint:`URL to poll for current state`,restPathHint:`e.g. state or data.power.status`,restPowerUrlHint:`Separate URL for power data (uses Status URL if empty)`,restEnergyUrlHint:`Separate URL for energy data (uses Status URL if empty)`,restEnergyHint:`Each value can use its own URL or fall back to the Status URL. Use multipliers for unit conversion (e.g. 0.001 to convert Wh to kWh).`,testConnection:`Test Connection`,connectionSuccess:`Connection successful`,noSwitchesInSwitchbar:`No switches in switchbar`,enableSwitchbarHint:`Enable "Show in Switchbar" in Settings > Smart Plugs`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`Email`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`SMTP email notifications`,telegram:`Notifications via Telegram bot`,discord:`Send to Discord channel via webhook`,ntfy:`Free, self-hostable push notifications`,pushover:`Simple, reliable push notifications`,callmebot:`Free WhatsApp notifications via CallMeBot`,webhook:`Generic HTTP POST to any URL`,homeassistant:`Persistent notifications in Home Assistant dashboard`,bark:`iOS push notifications via Bark (self-hostable)`},lastSuccess:`Last: {{date}}`,error:`Error`,printer:`Printer:`,allPrinters:`All printers`,sendTestNotification:`Send Test Notification`,eventSettings:`Event Settings`,enabled:`Enabled`,sendFromProvider:`Send notifications from this provider`,printEvents:`Print Events`,printerStatus:`Printer Status`,amsAlarms:`AMS Alarms`,amsHtAlarms:`AMS-HT Alarms`,printQueue:`Print Queue`,start:`Start`,plateCheck:`Plate Check`,complete:`Complete`,failed:`Failed`,stopped:`Stopped`,progress:`Progress`,offline:`Offline`,lowFilament:`Low Filament`,maintenance:`Maintenance`,amsHumidity:`AMS Humidity`,amsTemp:`AMS Temp`,amsDryingSuspended:`Drying Suspended`,amsHtHumidity:`AMS-HT Humidity`,amsHtTemp:`AMS-HT Temp`,bedCooled:`Bed Cooled`,firstLayer:`First Layer`,quiet:`Quiet`,digest:`Digest {{time}}`,printStarted:`Print Started`,plateNotEmpty:`Plate Not Empty`,plateNotEmptyDescription:`Objects detected before print`,plateClearRequired:`Plate Clear Required`,plateClearRequiredDescription:`Print finished, queue waits for plate confirmation`,plateClear:`Plate Clear`,printCompleted:`Print Completed`,bedCooledLabel:`Bed Cooled`,bedCooledDescription:`Bed cooled below threshold after print`,firstLayerCompleteLabel:`First Layer Complete`,firstLayerCompleteDescription:`Notify with snapshot when first layer finishes`,missingSpoolAssignmentLabel:`Missing Spool Assignment`,billingChargeFailedLabel:`Billing Charge Failed`,billingChargeFailedDescription:`Notify when print costs could not be recorded`,missingSpoolAssignmentDescription:`Notify when print starts and required trays have no assigned spool`,printFailed:`Print Failed`,printStopped:`Print Stopped`,progressMilestones:`Progress Milestones`,progressMilestonesDescription:`Notify at 25%, 50%, 75%`,printerOffline:`Printer Offline`,printerError:`Printer Error`,aiFailureDetection:`AI Failure Detection`,aiFailureDetectionDescription:`Notify when Obico AI detects a possible print failure`,lowFilamentLabel:`Low Filament`,maintenanceDue:`Maintenance Due`,maintenanceDueDescription:`Notify when maintenance is needed`,amsHumidityHigh:`AMS Humidity High`,amsHumidityHighDescription:`Regular AMS humidity exceeds threshold`,amsTemperatureHigh:`AMS Temperature High`,amsTemperatureHighDescription:`Regular AMS temperature exceeds threshold`,amsDryingSuspendedTitle:`Auto-Drying Suspended`,amsDryingSuspendedDescription:`Automatic drying gave up on an AMS unit because humidity never fell below the threshold`,amsHtHumidityHigh:`AMS-HT Humidity High`,amsHtHumidityHighDescription:`AMS-HT humidity exceeds threshold`,amsHtTemperatureHigh:`AMS-HT Temperature High`,amsHtTemperatureHighDescription:`AMS-HT temperature exceeds threshold`,inventoryAlerts:`Inventory Alerts`,stockReorderAlert:`Reorder Alert`,stockReorderAlertDescription:`SKU has reached its reorder point`,stockBreakAlert:`Stock Break Alert`,stockBreakAlertDescription:`Stock will run out before replenishment arrives`,jobAdded:`Job Added`,jobAddedDescription:`Job added to queue`,jobAssigned:`Job Assigned`,jobAssignedDescription:`Model-based job assigned to printer`,jobStarted:`Job Started`,jobStartedDescription:`Queue job started printing`,jobWaiting:`Job Waiting`,jobWaitingDescription:`Job waiting for filament or printer`,jobSkipped:`Job Skipped`,jobSkippedDescription:`Job skipped (previous failed)`,jobFailed:`Job Failed`,jobFailedDescription:`Job failed to start`,queueComplete:`Queue Complete`,queueCompleteDescription:`All queue jobs finished`,quietHours:`Quiet Hours`,noNotificationsDuring:`No notifications during these hours`,editProviderToChangeQuietHours:`Edit provider to change quiet hours`,dailyDigest:`Daily Digest`,batchNotifications:`Batch notifications into a single daily summary`,sendAt:`Send at {{time}}`,editProviderToChangeDigestTime:`Edit provider to change digest time`,edit:`Edit`,deleteProvider:`Delete Notification Provider`,deleteConfirm:`Are you sure you want to delete "{{name}}"? This cannot be undone.`,delete:`Delete`,addTitle:`Add Notification Provider`,editTitle:`Edit Notification Provider`,nameLabel:`Name *`,namePlaceholder:`My Notifications`,providerTypeLabel:`Provider Type *`,configuration:`Configuration`,testConfiguration:`Test Configuration`,printerFilter:`Printer Filter`,onlyFromPrinter:`Only send notifications for events from this printer`,quietHoursDnd:`Quiet Hours (Do Not Disturb)`,quietStart:`Start`,quietEnd:`End`,dailyDigestLabel:`Daily Digest`,sendDigestAt:`Send digest at`,digestCollected:`Events will be collected and sent as a single summary at this time`,notificationEvents:`Notification Events`,progressPercent:`(25%, 50%, 75%)`,bedCooledAfterPrint:`(after print completes)`,haSensorAlert:`Printer Sensor Alert`,haSensorAlertDescription:`(a bound Home Assistant sensor needs attention)`,locationHaSensorAlert:`Storage Location Sensor Alert`,locationHaSensorAlertDescription:`(a Home Assistant sensor bound to a storage location needs attention)`,eventPriority:{sectionTitle:`ntfy Priority`,helpNtfy:`Pick a priority for each enabled event. ntfy uses these to escalate alerts (sound, visibility, push behavior). Levels not set here use the ntfy server default.`,min:`Min`,low:`Low`,default:`Default`,high:`High`,urgent:`Urgent`},cancel:`Cancel`,save:`Save`,add:`Add`,nameRequired:`Name is required`,fieldRequired:`{{field}} is required`,haDataInvalid:`The Data field must be a valid JSON object, e.g. {"priority": "high", "ttl": 0}`,phoneNumber:`Phone Number`,apiKey:`API Key`,serverUrl:`Server URL`,topic:`Topic`,authToken:`Auth Token`,userKey:`User Key`,appToken:`App Token`,priority:`Priority`,pushoverRetry:`Emergency Retry (s)`,pushoverExpire:`Emergency Expire (s)`,botToken:`Bot Token`,chatId:`Chat ID`,telegramThreadId:`Forum Topic ID`,telegramThreadIdHelp:`Optional. Posts into a single topic of a forum group — the last number in the topic link (t.me/c/.../25). Leave empty for the General topic.`,telegramThreadIdInvalid:`Forum Topic ID must be a number.`,smtpServer:`SMTP Server`,smtpPort:`SMTP Port`,security:`Security`,authentication:`Authentication`,username:`Username`,password:`Password`,fromEmail:`From Email`,toEmail:`To Email`,webhookUrl:`Webhook URL`,payloadFormat:`Payload Format`,authorization:`Authorization`,titleFieldName:`Title Field Name`,messageFieldName:`Message Field Name`,editTemplate:`Edit Template: {{name}}`,titleLabel:`Title`,bodyLabel:`Body`,titlePlaceholder:`Notification title...`,bodyPlaceholder:`Notification body...`,availableVariables:`Available Variables`,clickToInsert:`Click to insert at cursor position in body`,livePreview:`Live Preview`,hide:`Hide`,show:`Show`,loadingPreview:`Loading preview...`,enterTemplateContent:`Enter template content to see preview`,titlePreview:`Title:`,bodyPreview:`Body:`,resetToDefault:`Reset to Default`,titleRequired:`Title is required`,bodyRequired:`Body is required`,notificationLog:`Notification Log`,showFailedOnly:`Failed only`,last24Hours:`Last 24 hours`,last7Days:`Last 7 days`,last30Days:`Last 30 days`,last90Days:`Last 90 days`,justNow:`Just now`,noFailedNotifications:`No failed notifications`,noNotificationsLogged:`No notifications logged`,unknownProvider:`Unknown Provider`,logTitle:`Title`,logMessage:`Message`,logError:`Error`,logProvider:`Provider: {{type}}`,logTime:`Time: {{time}}`,refresh:`Refresh`,clearOld:`Clear Old`,statsSummary:`Last {{days}} days:`,statsNotifications:`notifications`,statsSent:`{{count}} sent`,statsFailed:`{{count}} failed`,eventTypes:{print_start:`Print Started`,print_complete:`Print Complete`,print_failed:`Print Failed`,print_stopped:`Print Stopped`,print_progress:`Progress`,printer_offline:`Printer Offline`,printer_error:`Printer Error`,filament_low:`Low Filament`,maintenance_due:`Maintenance Due`,test:`Test`},userEmail:{title:`Notifications`,emailNotifications:`Email Notifications`,emailNotificationsDesc:`Receive email notifications for your own print jobs. Emails are sent using the system SMTP settings configured in Advanced Authentication.`,sendingTo:`Notifications will be sent to`,noEmailWarning:`Your account does not have an email address. Contact an administrator to add one.`,printJobNotifications:`Print Job Notifications`,printJobNotificationsDesc:`Choose which events trigger email notifications for print jobs you submit.`,printJobStarts:`Print Job Starts`,printJobStartsDesc:`Get notified when your print job begins.`,printJobFinishes:`Print Job Finishes`,printJobFinishesDesc:`Get notified when your print job completes successfully.`,printErrors:`Print Errors`,printErrorsDesc:`Get notified when your print job fails or encounters an error.`,printJobStops:`Print Job Stops`,printJobStopsDesc:`Get notified when your print job is cancelled or stopped.`,saveSuccess:`Notification preferences saved.`,saveError:`Failed to save notification preferences.`}},richTextEditor:{bold:`Bold`,italic:`Italic`,underline:`Underline`,bulletList:`Bullet List`,numberedList:`Numbered List`,alignLeft:`Align Left`,alignCenter:`Align Center`,alignRight:`Align Right`,addLink:`Add Link`,removeLink:`Remove Link`},externalLinks:{title:`Sidebar Links`,sidebarLayout:`Sidebar`,sidebarLayoutDescription:`Show or hide built-in pages, add external links, and drag items to reorder the sidebar navigation.`,systemPages:`Bambuddy pages`,externalLinks:`External links`,visibleInSidebar:`Visible in sidebar`,hiddenFromSidebar:`Hidden from sidebar`,requiredInSidebar:`Required in sidebar`,hidePage:`Hide page`,showPage:`Show page`,settingsCannotBeHidden:`Settings cannot be hidden`,noLinksConfigured:`No external links configured`,deleteLink:`Delete Link`,removeCustomIcon:`Remove custom icon`,openInNewTab:`Open in new tab`,placeholders:{linkName:`My Link`}},keyboardShortcuts:{title:`Keyboard Shortcuts`,navigation:`Navigation`,archivesSection:`Archives`,kProfilesSection:`K-Profiles`,generalSection:`General`,shortcuts:{goToPrinters:`Go to Printers`,goToArchives:`Go to Archives`,goToQueue:`Go to Queue`,goToStats:`Go to Statistics`,goToProfiles:`Go to Cloud Profiles`,goToSettings:`Go to Settings`,focusSearch:`Focus search`,openUploadModal:`Open upload modal`,clearSelection:`Clear selection / blur input`,contextMenu:`Context menu on cards`,refreshProfiles:`Refresh profiles`,newProfile:`New profile`,exitSelectionMode:`Exit selection mode`,showHelp:`Show this help`},footer:`Press Esc or click outside to close`},notificationLog:{title:`Notification Log`,events:{printStarted:`Print Started`,printComplete:`Print Complete`,printFailed:`Print Failed`,printStopped:`Print Stopped`,progress:`Progress`,printerOffline:`Printer Offline`,printerError:`Printer Error`,lowFilament:`Low Filament`,maintenanceDue:`Maintenance Due`,test:`Test`},timeAgo:{justNow:`Just now`,minutesAgo:`{{minutes}}m ago`,hoursAgo:`{{hours}}h ago`}},restoreBackup:{title:`Restore Backup`,restoring:`Restoring...`,restoreComplete:`Restore Complete`,restoreFailed:`Restore Failed`,importSettings:`Import settings from a backup file`,pleaseWait:`Please wait while your data is being restored`,clickToSelect:`Click to select backup file (.json or .zip)`,howDuplicateHandling:`How duplicate handling works:`,categories:{printers:`Printers`,smartPlugs:`Smart Plugs`,notificationProviders:`Notification Providers`,filaments:`Filaments`,archives:`Archives`,pendingUploads:`Pending Uploads`,settingsTemplates:`Settings & Templates`},matchingInfo:{printers:`matched by serial number`,smartPlugs:`matched by IP address`,notificationProviders:`matched by name`,filaments:`matched by name + type + brand`,archives:`matched by content hash`,pendingUploads:`matched by filename`,settingsTemplates:`always overwritten`},replaceExisting:`Replace existing data`,keepExisting:`Keep existing data`,replaceDescription:`Overwrite items that already exist with backup data`,keepDescription:`Only restore items that don't already exist`,caution:`Caution:`,cautionText:`Overwriting will replace your current configurations with backup data. Printer access codes are never overwritten for security.`,itemsRestored:`Items Restored`,itemsSkipped:`Items Skipped`,restored:`Restored`,skipped:`Skipped (already exist)`,filesLabel:`Files (3MF, thumbnails, etc.)`,newApiKeysGenerated:`New API Keys Generated`,newApiKeysWarning:`These keys are only shown once. Copy them now!`,processingBackup:`Processing backup file...`,noDataFound:`No data was found to restore in the backup file.`,failedToRestore:`Failed to restore backup. Please check the file format.`},backupExport:{title:`Export Backup`,selectData:`Select data to include`,selectAll:`Select All`,selectNone:`Select None`,categoryDescriptions:{settings:`Language, theme, update preferences`,notifications:`ntfy, Pushover, Discord, etc.`,templates:`Custom message templates`,smartPlugs:`Tasmota plug configurations`,externalLinks:`Sidebar links to external services`,printers:`Printer info (access codes excluded)`,plateDetection:`Empty plate reference images`,filaments:`Filament types and costs`,maintenance:`Custom maintenance schedules`,archives:`All print data + files (3MF, thumbnails, photos)`,projects:`Projects, BOM items, and attachments`,pendingUploads:`Virtual printer uploads awaiting review`,apiKeys:`Webhook API keys (new keys generated on import)`},requiresPrinters:`Requires Printers to be selected`,zipFileWarning:`ZIP file will be created.`,zipFileDescription:`Includes all 3MF files, thumbnails, timelapses, and photos. This may take a while and result in a large file.`,includeAccessCodes:`Include Access Codes`,includeAccessCodesDescription:`For transferring to another machine`,includeAccessCodesWarning:`Access codes will be included in plain text. Keep this backup file secure!`,categoriesSelected:`{{selectedCount}} categories selected`},pendingUploads:{placeholders:{notes:`Add notes about this print...`},discardUpload:`Discard Upload`,archiveAllUploads:`Archive All Uploads`,discardAllUploads:`Discard All Uploads`,archive:`Archive`,timeAgo:{justNow:`Just now`,minutesAgo:`{{minutes}}m ago`,hoursAgo:`{{hours}}h ago`,daysAgo:`{{days}}d ago`}},apiBrowser:{placeholders:{requestBody:`JSON request body...`,searchEndpoints:`Search endpoints...`}},configureAmsSlot:{title:`Configure AMS Slot`,slotConfigured:`Slot Configured!`,configuringSlot:`Configuring slot:`,slotLabel:`{{ams}} Slot {{slot}}`,searchPresets:`Search presets...`,colorPlaceholder:`Color name or hex (e.g., brown, FF8800)`,clearCustomColor:`Clear custom color`,noCloudPresets:`No cloud presets. Login to Bambu Cloud to sync.`,noPresetsAvailable:`No presets available. Login to Bambu Cloud or import local profiles.`,noMatchingPresets:`No matching presets found.`,custom:`Custom`,builtin:`Built-in`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Settings sent to printer`,filamentProfile:`Filament Profile`,kProfileLabel:`K Profile (Pressure Advance)`,filteringFor:`Filtering for: {{material}}`,noKProfile:`No K profile (use default 0.020)`,noMatchingKProfiles:`No matching K profiles found. Default K=0.020 will be used.`,otherKProfiles:`Other K profiles on this printer`,selectFilamentFirst:`Select a filament profile first`,kFromCalibration:`K={{value}} from printer calibration`,customColorLabel:`Custom Color (optional)`,presetColors:`{{name}} colors:`,showLessColors:`Show less colors`,showMoreColors:`Show more colors`,clear:`Clear`,hexLabel:`Hex: #{{hex}}`,resetting:`Resetting...`,resetSlot:`Reset Slot`,cancel:`Cancel`,configuring:`Configuring...`,configureSlot:`Configure Slot`},githubBackup:{title:`Git Backup`,history:`History`,downloadBackup:`Download Backup`,restoreBackup:`Restore Backup`,noBackupsYet:`No backups yet`},emailSettings:{placeholders:{fromName:`BamBuddy`}},tagManagement:{searchTags:`Search tags...`,renameTag:`Rename tag`,deleteTag:`Delete tag`},notificationTemplates:{placeholders:{title:`Notification title...`,body:`Notification body...`}},batchTag:{placeholders:{newTag:`Enter new tag...`}},photoGallery:{deletePhoto:`Delete Photo`},filamentHoverCard:{copySpoolUuid:`Copy spool UUID`},kProfilesView:{hasNote:`Has note`,copyProfile:`Copy profile`},layout:{openMenu:`Open menu`,noPermissionSystemInfo:`You do not have permission to view system information`},dashboard:{dragToReorder:`Drag to reorder`,hideWidget:`Hide widget`},notificationProviderCard:{deleteNotificationProvider:`Delete Notification Provider`},fileManagerModal:{closeFileManager:`Close file manager`,sortFiles:`Sort files`,goToParentFolder:`Go to parent folder`,threeView:`3D View`},embeddedCameraViewer:{refreshStream:`Refresh stream`,close:`Close`,zoomOut:`Zoom out`,resetZoom:`Reset zoom`,zoomIn:`Zoom in`,dragToResize:`Drag to resize`},timelapseViewer:{skipBack5s:`Skip back 5s`,skipForward5s:`Skip forward 5s`},notificationProviders:{descriptions:{email:`SMTP email notifications`,telegram:`Notifications via Telegram bot`,discord:`Send to Discord channel via webhook`,ntfy:`Free, self-hostable push notifications`,pushover:`Simple, reliable push notifications`,callmebot:`Free WhatsApp notifications via CallMeBot`,webhook:`Generic HTTP POST to any URL`}},logViewer:{searchPlaceholder:`Search message or logger name...`,noLogEntries:`No log entries found`},switchbarPopover:{noSwitchesInSwitchbar:`No switches in switchbar`},projectPageModal:{placeholders:{title:`Title`,designer:`Designer`,license:`License`,description:`Enter description...`,profileTitle:`Profile Title`,profileDescription:`Profile description...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`Waiting`,justNow:`Just now`,now:`Now`,minsAgo:`{{count}}m ago`,inMins:`in {{count}}m`,hoursAgo:`{{count}}h ago`,inHours:`in {{count}}h`,daysAgo:`{{count}}d ago`,inDays:`in {{count}}d`},spoolbuddy:{nav:{dashboard:`Dashboard`,ams:`AMS`,inventory:`Inventory`,writeTag:`Write`,settings:`Settings`},status:{nfcReady:`NFC Ready`,nfcOff:`NFC Off`,offline:`Offline`,online:`Online`,noPrinters:`No printers`,deviceOffline:`Device Offline`,waitingConnection:`Waiting for device connection...`,systemReady:`System Ready`,status:`Status`},dashboard:{readyToScan:`Ready to scan`,idleMessage:`Place a spool on the scale to identify it`,nfcHint:`NFC tag will be read automatically`,device:`Device`,syncWeight:`Sync Weight`,weightSynced:`Synced!`,unknownTag:`Unknown Tag`,newTag:`New Tag Detected`,onScale:`on scale`,linkSpool:`Link to Spool`,linkTagTitle:`Link Tag to Spool`,linkTag:`Link Tag`,selectSpool:`Select a spool to link this tag to:`,noUntagged:`No spools without tags found`,tagDetected:`Tag detected`,noTag:`No tag`,tagId:`Tag`,grossWeight:`Gross weight`,spoolSize:`Spool size`,close:`Close`,currentSpool:`Current Spool`,plateReady:`Plate ready: {{name}}`,plateReadyLabel:`Plates ready to clear`,plateClearAction:`Clear`,plateClearedToast:`Plate marked as cleared`,plateClearFailed:`Could not mark plate as cleared`},modal:{spoolDetected:`Spool Detected`,assignToAms:`Assign to AMS`,syncWeight:`Sync Weight`,weightSynced:`Synced!`,syncing:`Syncing...`,newTagDetected:`New Tag Detected`,addToInventory:`Add to Inventory`,assignToAmsTitle:`Assign to AMS`,selectSlot:`Select a slot`,assign:`Assign`,assigning:`Assigning...`,assignSuccess:`Assigned!`,assignPendingInsert:`Assigned. Slot will configure when you insert the spool.`,assignError:`Failed to assign spool. Please try again.`,noPrinterSelected:`Select a printer...`,noAmsDetected:`No AMS detected on this printer`,slot:`Slot`},weight:{noReading:`No reading`,stable:`Stable`,measuring:`Measuring...`,tare:`Tare`,calibrate:`Calibrate`},spool:{remaining:`Remaining`,material:`Material`,brand:`Brand`,color:`Color`,coreWeight:`Core`,labelWeight:`Label`,scaleWeight:`Scale`,netWeight:`Net`,lastUsed:`Last used`,unknownColor:`Unknown color`},ams:{noData:`No AMS detected`,connectAms:`Connect an AMS to see filament slots`,noPrinter:`No printer selected`,selectPrinter:`Select a printer from the top bar`,printerDisconnected:`Printer disconnected`,humidity:`Humidity`,level:`Level`,active:`Active`,slot:`Slot`,empty:`Empty`},inventory:{search:`Search spools...`,empty:`No spools in inventory`,noResults:`No matching spools`,spools:`spools`,addSpool:`Add Spool`},settings:{tabDevice:`Device`,tabDisplay:`Display`,tabScale:`Scale`,tabUpdates:`Updates`,nfcReader:`NFC Reader`,type:`Type`,connection:`Connection`,notConnected:`N/A`,deviceInfo:`Device Info`,hostname:`Host`,uptime:`Uptime`,systemConfig:`Backend & Auth`,backendUrl:`Bambuddy Backend URL`,apiToken:`API Token`,apiTokenPlaceholder:`Enter API token`,saveConfig:`Save Config`,systemQueued:`Config queued.`,nfcDiagnostic:`NFC Diagnostic`,scaleDiagnostic:`Scale Diagnostic`,readTagDiagnostic:`Read Tag Diagnostic`,testNfc:`Test reader`,testScale:`Test accuracy`,testReadTag:`Read tag`,systemFieldsRequired:`Backend URL is required.`,brightness:`Brightness`,saved:`Saved`,noBacklight:`No DSI backlight detected. Brightness control requires a DSI display.`,screenBlank:`Screen Blank Timeout`,screenBlankDesc:`Screen turns off after inactivity. Touch to wake.`,displayNote:`Brightness is applied as a software filter.`,scaleCalibration:`Scale Calibration`,currentWeight:`Current weight`,tareOffset:`Tare`,calFactor:`Factor`,knownWeight:`Known weight`,calStep1:`Remove all items from the scale and press Set Zero.`,calStep2:`Place known weight on scale.`,setZero:`Set Zero`,calibrateNow:`Calibrate`,calibrated:`Calibrated`,tareSet:`Tare command sent. Waiting for device...`,tareComplete:`Tare complete!`,tareTimedOut:`Tare timed out — is the SpoolBuddy daemon running?`,tareFailed:`Failed to send tare command`,zeroSet:`Zero point set. Place known weight on scale.`,calibrationDone:`Calibration complete!`,calibrationFailed:`Calibration failed`,lastCalibrated:`Last calibrated`,stable:`Stable`,settling:`Settling...`,firmware:`Firmware`,scale:`Scale`,noDevice:`No SpoolBuddy device found`,daemonVersion:`Daemon Version`,currentVersion:`Current`,versionPending:`Waiting for daemon...`,checking:`Checking...`,checkUpdates:`Check for Updates`,updateAvailable:`Update available`,updateInstructions:`Update via SSH: run the SpoolBuddy install script to upgrade.`,upToDate:`Up to date`,includeBeta:`Include beta versions`},writeTag:{tabExisting:`Existing Spool`,tabNew:`New Spool`,tabReplace:`Replace Tag`,searchPlaceholder:`Search by material, color, brand...`,noUntaggedSpools:`No spools without tags`,noTaggedSpools:`No spools with tags`,selectSpool:`Select a spool, then place a blank NTAG on the reader`,placeTag:`Place an NTAG on the reader`,tagReady:`Tag detected — ready to write`,writeTag:`Write Tag`,replaceTag:`Replace Tag`,writing:`Writing tag...`,waiting:`Waiting for SpoolBuddy...`,writeSuccess:`Tag written successfully!`,writeFailed:`Write failed`,queueFailed:`Failed to queue write command`,tryAgain:`Try Again`,cancel:`Cancel`,replaceWarning:`Old tag will be unlinked. New tag will replace it.`,deviceOffline:`SpoolBuddy is offline`,material:`Material`,colorName:`Color Name`,color:`Color`,brand:`Brand`,weight:`Weight (g)`,createSpool:`Create Spool`,creating:`Creating...`,spoolCreated:`Spool created! Ready to write.`,createFailed:`Failed to create spool`,incompleteDataWarning:`Tag written with incomplete Spoolman data`},quickMenu:{printerPower:`Printer Power`,systemControls:`System`,restartDaemon:`Restart Daemon`,restartBrowser:`Restart Browser`,reboot:`Reboot`,shutdown:`Shutdown`,swipeToClose:`Swipe down to close`,confirmTitle:`Confirm`,confirmShutdown:`Are you sure you want to shut down the SpoolBuddy? You will need physical access to turn it back on.`,confirmReboot:`Are you sure you want to reboot the SpoolBuddy?`,confirmRestartDaemon:`Restart the SpoolBuddy daemon? NFC and scale will be temporarily unavailable.`,confirmRestartBrowser:`Restart the kiosk browser? The display will briefly go blank.`,confirm:`Confirm`,confirmPlugOn:`Turn on {{name}}?`,confirmPlugOff:`Turn off {{name}}?`,turnOn:`Turn On`,turnOff:`Turn Off`}},diagnostic:{modalTitle:`Connection diagnostic — {{name}}`,running:`Running diagnostic...`,runningElapsed:`Running diagnostic... ({{elapsed}}s)`,waitingForReportHint:`Listening for the printer to publish a status report — this can take up to {{max}} seconds.`,runFailed:`Diagnostic could not run: {{error}}`,retry:`Run again`,runButton:`Run diagnostic`,sectionTitle:`Connection Diagnostic`,sectionDescription:`Check why a printer won't connect or won't print — port reachability, LAN developer mode, Docker network mode, and credentials.`,noPrinters:`No printers configured.`,overall:{ok:`No problems found — the printer connection looks healthy.`,warnings:`The printer should work, but some things need attention.`,problems:`Found problems that explain why the printer won't connect or print.`},check:{port_mqtt:{title:`Control port (MQTT 8883)`,pass:`Reachable — the printer is accepting control connections.`,fail:`Port 8883 is unreachable. The printer is powered off, on a different IP address, or a firewall is blocking it. Verify the printer IP and that nothing blocks port 8883.`},port_ftps:{title:`File transfer port (FTPS 990)`,pass:`Reachable — sending print files will work.`,warn:`Port 990 is unreachable. Monitoring may still work, but sending prints to the printer will fail. Make sure port 990 is not blocked.`,warn_no_tls:`Port 990 is open but the printer's file service is not completing a TLS handshake. Print files, covers and timelapses cannot be fetched, so archives stay empty. Restart the printer — unblocking the port will not help.`},external_storage:{title:`Store sent files on external storage (install step 4)`,pass:`The printer reports this option is on — sent files will be stored on the SD card and archives will have thumbnails and slicer metadata.`,fail:`The printer reports this option is off. Enable "Store sent files on external storage" — on newer firmware (P2S 01.02 / Bambu Studio 2.6+) the toggle lives on the printer's Print Settings; on older versions it's in Bambu Studio / OrcaSlicer's Device tab. Without it, every archived print is missing its thumbnail and slicer metadata.`,skip:`Not checked — needs a live MQTT connection. On older slicers where this setting lives only in the slicer the printer never reports it, so this check will pass even when the option is off — verify install step 4 manually.`,skip_unsupported_model:`This model has an SD slot but no way to turn the option on — current P1-series firmware doesn't expose the toggle in Bambu Studio and the printer has no screen. Nothing to fix here; archived prints may lack thumbnails and slicer metadata until Bambu Lab adds firmware support.`,fail_no_media:`The option is on, but the printer reports no card or stick in its slot, so there is nowhere for sent files to go. Insert one and print again — until then every archived print will be missing its thumbnail and slicer metadata.`,warn_internal_storage:`The option is on and storage is present, but the last print still went to the printer's internal storage, which Bambuddy cannot read. On H2-series, P2S and X2D, Bambu Studio's Print button always sends there whatever this option is set to. Prints archive with their name and timing, but without a thumbnail or slicer metadata. For complete archives, start prints from Bambuddy or slice in OrcaSlicer — or in Bambu Studio use Send with External selected, then start the print.`,warn_internal_history:`The option is on and storage is present, but the last print ran from a file that was already on the printer — a re-print from its screen, a start from Handy, or a file sent earlier. That library sits on internal storage Bambuddy cannot read, and no setting changes it, because nothing was sent for that print. It still archives with its name and timing, but without a thumbnail or slicer metadata. For complete archives, start prints from Bambuddy or send them from the slicer.`},port_rtsps:{title:`Camera port ({{protocol}} {{port}})`,pass:`Reachable — the camera stream will work.`,warn:`Port {{port}} is unreachable. The live camera view will not work. This does not affect printing.`},macos_local_network:{title:`macOS Local Network permission`,pass:`macOS is allowing Bambuddy to reach the local network.`,warn_unsigned:`The Python that runs Bambuddy has no code signature, so macOS has nothing to attach a Local Network permission to and silently drops every connection to the printer — no error and no prompt. Run the Bambuddy updater (install/update_macos.sh), which signs it, then restart Bambuddy. Interpreter: {{executable}}`,warn_permission:`If the printer is powered on and at this address, open System Settings > Privacy & Security > Local Network and make sure the Python that runs Bambuddy is enabled. macOS drops local connections silently when it is not, and updating Python can leave the old permission behind.`},network_mode:{title:`Container network mode`,genericRuntime:`a container`,pass:`Running in {{runtime}} with host networking.`,warn:`Bambuddy is running in {{runtime}} with bridge networking. Printer discovery and the Virtual Printer need host networking — recreate the container with host network mode ("network_mode: host" in docker-compose, "--network=host" for Podman).`,skip:`Not running in a container — not applicable.`,skip_unknown:`Bambuddy is running in {{runtime}}, but its network mode could not be determined. If printer discovery or the Virtual Printer do not work, recreate the container with host networking.`,skip_system_container:`Bambuddy is running in a {{runtime}} system container, which sits on the LAN like a virtual machine — not applicable.`},subnet:{title:`Network subnet`,pass:`The printer and Bambuddy are on the same subnet.`,warn:`The printer ({{printer_ip}}) and Bambuddy ({{host_ip}}) are on different subnets. They may not reach each other unless routing between the subnets is configured.`,skip:`Subnet could not be determined — skipped.`},mqtt_auth:{title:`Printer credentials`,pass:`The printer accepted the connection.`,fail:`The printer is reachable but Bambuddy is not connected to it. The access code or serial number is most likely wrong — the access code changes every time LAN Only or Developer Mode is toggled, so re-copy it from the printer screen. A printer that is rebooting, or already at its limit of simultaneous connections, can look the same.`,fail_auth_rejected:`The printer refused Bambuddy's credentials. The access code or serial number is wrong — the access code changes every time LAN Only or Developer Mode is toggled, so re-copy it from the printer screen and save it in the printer settings.`,skip:`Not checked — the printer could not be reached.`},developer_mode:{title:`LAN Developer Mode`,pass:`Developer Mode is enabled.`,fail:`Developer Mode is OFF on the printer. Enable it in the printer's LAN settings — and confirm with OK. Without it, prints will not start.`,skip:`Could not be checked — requires a live connection to the printer.`},printer_publishing:{title:`Printer is publishing status`,pass:`The printer is publishing status updates — AMS, filaments, and K-profiles will mirror correctly to the slicer.`,fail:`The MQTT broker accepted the connection but the printer has not published any status reports. This is almost always a wrong or mis-cased serial number — the device/<serial>/report topic is case-sensitive. Re-check the serial in printer settings against the screen on the printer.`,skip:`Could not be checked — requires a live connection to the printer.`}}},systemHealth:{sectionTitle:`System Health`,sectionDescription:`Scans recent logs for known issues you can usually fix yourself, before they turn into a support ticket.`,rescan:`Re-scan`,clean:`No known issues found in the last {{times}} log entries.`,logUnavailable:`File logging is disabled, so logs cannot be scanned. Enable file logging to use this check.`,learnMore:`How to fix`,fixLabel:`Fix:`,occurrences:`Seen {{times}}× — last at {{lastSeen}}`,category:{layer8:`You can fix this`,environment:`Environment`,bug:`Please report this`},signature:{"ftp-auth-rejected":{name:`Printer rejected the access code`,cause:`The printer refused the file-transfer login. The access code is wrong, or it changed after Developer Mode was toggled.`,fix:`Re-copy the access code from the printer screen (LAN settings) and update it in the printer's settings in Bambuddy.`},"ftp-connection-timeout":{name:`File-transfer connection timed out`,cause:`Bambuddy could not reach the printer's file-transfer port (FTPS 990). The port is blocked, or the printer is off or on another subnet.`,fix:`Make sure nothing blocks port 990 between Bambuddy and the printer, and that both are on the same network.`},"ftp-ssl-error":{name:`Secure file-transfer handshake failed`,cause:`The printer's file service answered port 990 without TLS. Its file server has wedged — a printer-side fault, not a firewall or firmware problem.`,fix:`Restart the printer. Until then print files, covers and timelapses cannot be fetched; printing itself is unaffected.`},"bambu-cloud-captcha":{name:`Bambu Cloud is asking for a CAPTCHA`,cause:`Bambu's anti-abuse layer is challenging this network, so no Bambu Cloud sign-in can complete. It is tied to the public IP address, not to your account or this installation.`,fix:`Wait — it normally clears within a few hours, and repeated sign-in attempts prolong it. To connect meanwhile, sign in with an access token taken from a browser session.`},"mqtt-connection-flapping":{name:`Printer connection keeps dropping`,cause:`The control connection (MQTT 8883) repeatedly disconnects and reconnects — usually a weak network path or a partially blocked port.`,fix:`Check the Wi-Fi signal at the printer, prefer a wired connection, and make sure port 8883 is reliably reachable.`},"camera-connection-refused":{name:`Camera stream unreachable`,cause:`The live camera could not be reached on port RTSPS 322. The port is blocked, or the camera or LAN liveview is off on the printer.`,fix:`Enable the camera and LAN liveview on the printer, and make sure port 322 is not blocked. This does not affect printing.`},"database-locked":{name:`Database write contention`,cause:`The SQLite database is hitting "database is locked" errors under load — common when running several printers at once.`,fix:`Switch Bambuddy to an external PostgreSQL database. See the PostgreSQL guide in the documentation.`}}},vpDiagnostic:{title:`Setup check — {{name}}`,runButton:`Run setup check`,running:`Running setup check...`,runFailed:`Could not run the setup check: {{error}}`,retry:`Run again`,overall:{ok:`All checks passed — this virtual printer is set up correctly.`,warnings:`The virtual printer should work, but some things need attention.`,problems:`Found problems that explain why the slicer can't see or use this virtual printer.`},check:{enabled:{title:`Virtual printer enabled`,fail:`This virtual printer is switched off. Toggle it on to make it discoverable.`},running:{title:`Services running`,fail:`The virtual printer is enabled but its services are not running. Check the Bambuddy log — a bind IP conflict or a permission error usually stops them.`},bind_interface:{title:`Bind network interface`,fail:`The bind interface is not set, or no longer exists on this host. Pick a current interface in the Bind Interface dropdown.`},access_code:{title:`Access code set`,fail:`No access code is set. The slicer must be given the same 8-character access code you set here.`},target_printer:{title:`Target printer`,fail:`No target printer is selected. Proxy mode needs a real printer to forward to.`,warn:`The target printer is offline right now — proxying will resume once it reconnects.`},port_ftps:{title:`File-upload service (port {{port}})`,fail:`Nothing is listening on port {{port}} of the bind IP, so the slicer cannot upload files. A port conflict on this interface is the usual cause.`},port_mqtt:{title:`Control service (port {{port}})`,fail:`Nothing is listening on port {{port}} of the bind IP, so the slicer cannot connect or show status.`},port_bind:{title:`Discovery service (port {{port}})`,fail:`Nothing is listening on port {{port}} of the bind IP, so the slicer's discovery handshake fails.`},privileged_ports:{title:`Privileged port binding`,fail:`Port {{port}} is below 1024, and this service is not permitted to bind it — which is why nothing is listening above. Add AmbientCapabilities=CAP_NET_BIND_SERVICE to /etc/systemd/system/bambuddy.service and restart, or run "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))". On Docker, add cap_add: [NET_BIND_SERVICE].`},certificate:{title:`TLS certificate`,pass:`Certificate ready. Make sure the Bambuddy CA certificate (above) is imported into your slicer's trust store.`,fail:`The TLS certificate for this virtual printer is missing. Check that the Bambuddy data directory is writable.`}}},bugReport:{title:`Report a Bug`,description:`Description`,descriptionPlaceholder:`What went wrong? Please describe the issue...`,email:`Email (optional)`,emailPlaceholder:`your@email.com`,emailPrivacy:`If provided, your email will be included in a collapsed section of the GitHub issue so the maintainer can follow up.`,screenshot:`Screenshot`,uploadOrPaste:`Upload, paste, or drag an image`,dataCollectedSummary:`What data is included in the report?`,dataIncluded:`Included:`,dataIncludedList:`App version, OS, architecture, Python version, database stats (counts only), printer models, nozzle counts, firmware versions, connectivity status, integration status (Spoolman, MQTT, HA), non-sensitive settings, network interface count, Docker details, dependency versions.`,dataNeverIncluded:`Never included:`,dataNeverIncludedList:`Printer names, serial numbers, access codes, passwords, IP addresses, email addresses, API keys, tokens, webhook URLs, hostnames, or usernames.`,submit:`Submit`,startLogging:`Start Debug Logging`,stepEnableLogging:`Debug logging enabled`,stepReproduce:`Reproduce the issue now`,stepStopLogging:`Stop & submit report`,stopAndSubmit:`Stop & Submit`,maxDuration:`Auto-stops after {{minutes}} min`,stoppingLogs:`Collecting logs & submitting...`,submitting:`Submitting bug report...`,submittingStepConnection:`Running printer connectivity checks`,submittingStepVirtualPrinters:`Running virtual-printer setup checks`,submittingStepLogScan:`Scanning recent logs for known issues`,submittingStepSubmit:`Submitting report to GitHub`,submitSuccess:`Bug report submitted successfully!`,submitFailed:`Failed to submit bug report`,diagnosticChecking:`Checking printer connections...`,diagnosticHealthy:`Connection check passed — no problems found on your printers.`,diagnosticSummary:`{{problems}} of {{total}} printers have connection issues`,diagnosticIntro:`One or more printers have a connection problem that may be causing your issue. Expand a printer below to see the fix — resolving it could solve the problem without a bug report. You can still submit a report below.`,logHealthSummary:`Known issues found in your logs`,logHealthIntro:`Recent logs match known problems. Check the fixes below — resolving them could solve your issue without a bug report. You can still submit a report below.`,thankYou:`Thank you!`,submitted:`Your bug report has been submitted.`,viewIssue:`View Issue`,closeKeepsRecording:`You can close this panel while you reproduce the problem — recording keeps running, and reopening brings you back here.`,resumeRecording:`Bug report recording — {{elapsed}}. Click to finish.`,resumeReport:`Resume report`,unexpectedError:`An unexpected error occurred`},failureDetection:{title:`AI Failure Detection`,description:`Monitor prints with a self-hosted Obico ML API and act on detected failures automatically.`,mlUrl:`Obico ML API URL`,mlUrlHint:`Base URL of your self-hosted Obico ml_api container (e.g. http://192.168.1.10:3333).`,mlToken:`ML API Token (optional)`,mlTokenPlaceholder:`Leave empty if the server runs without ML_API_TOKEN`,mlTokenHint:`Must match the ML_API_TOKEN environment variable of your Obico ml_api container. Leave empty when the container runs without one.`,test:`Test`,testSuccess:`ML API reachable and healthy.`,testSuccessTokenUnknown:`ML API reachable and healthy. The token could not be checked.`,testFailed:`Could not reach the ML API.`,sensitivity:`Sensitivity`,sensitivityLow:`Low (fewer false positives)`,sensitivityMedium:`Medium (balanced)`,sensitivityHigh:`High (detect early, more false positives)`,sensitivityHint:`Adjusts the confidence thresholds that trigger warnings and failures.`,action:`Action on detected failure`,actionNotify:`Notify only`,actionPause:`Pause print`,actionPauseOff:`Pause and cut power`,pollInterval:`Poll interval (seconds)`,pollIntervalHint:`How often to check each printer while it is printing. Minimum 5s, maximum 120s.`,externalUrlMissing:`External URL is not set.`,externalUrlHint:`The ML API fetches the camera snapshot by URL. Set the External URL in General settings so the ML API container can reach Bambuddy.`,perPrinterTitle:`Monitored Printers`,perPrinterHint:`Choose which printers the detection service watches.`,monitorAll:`Monitor all connected printers`,statusTitle:`Status`,serviceRunning:`Service running`,thresholds:`Low / High thresholds`,activePrinters:`Active prints`,noActivePrints:`No prints currently running.`,historyTitle:`Recent Detections`,noHistory:`No detections yet.`},makerworld:{title:`MakerWorld`,description:`Paste a MakerWorld model URL to import and print it directly from Bambuddy — without leaving for the Bambu Handy app.`,pasteUrlHeader:`Import from MakerWorld`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… or paste any MakerWorld link`,resolveButton:`Resolve`,signInRequiredTitle:`Bambu Cloud sign-in required to download`,signInRequiredBody:`You can browse model details anonymously, but MakerWorld requires a Bambu Cloud account to download 3MF files.`,signInExpiredTitle:`Bambu Cloud sign-in expired`,signInExpiredBody:`You are still signed in to Bambuddy, but Bambu Lab has stopped accepting the stored token, so downloads will fail. Sign in to Bambu Cloud again.`,openCloudSettings:`Open Cloud settings`,untitledModel:`Untitled model`,byCreator:`by {{name}}`,downloadsCount:`{{count}} downloads`,licensePrefix:`License`,alreadyImported:`Already in library`,openOnMakerworld:`Open on MakerWorld`,alreadyInLibrary:`This model is already in your library — find it in File Manager → MakerWorld`,importSuccess:`Imported {{filename}} — saved to File Manager → MakerWorld`,platesHeader:`Plates ({{count}})`,plateDefaultName:`Plate {{n}}`,materialCount:`{{count}} filaments`,amsRequired:`AMS required`,slicedFor:`Sliced for {{printer}}`,alsoCompatible:`Also marked compatible: {{printers}}`,importToLibrary:`Save`,sliceIn:`Save & Slice in {{slicer}}`,disclaimer:`MakerWorld integration uses community-documented API endpoints. Bambuddy is not affiliated with or endorsed by MakerWorld or Bambu Lab.`,lastImportSuccess:`Imported to your library`,lastImportAlreadyInLibrary:`Already in your library`,viewInLibrary:`View in File Manager`,openInBambuStudio:`Open in Bambu Studio`,openInOrcaSlicer:`Open in OrcaSlicer`,importTo:`Import to file manager`,recentImportsHeader:`Recent imports`,phaseResolving:`Resolving`,phaseDownloading:`Downloading`,folderAuto:`MakerWorld (default)`,importAll:`Import all`,importAllProgress:`Importing {{current}}/{{total}}`,openGallery:`Open image gallery`,galleryPrev:`Previous image`,galleryNext:`Next image`,deleteImport:`Remove from library`,importDeleting:`Removing…`,importDeleted:`Removed from library`,confirmDelete:`Remove {{filename}} from the library? This deletes the local file but the plate can be re-imported from MakerWorld.`,errors:{resolveFailed:`Could not resolve that MakerWorld URL.`,downloadFailed:`Download failed. Please try again.`,deleteFailed:`Could not remove the file from the library.`}},gcodeViewer:{filamentSlot:`Filament {{n}}`,loading:`Reading toolpath…`,loadFailed:`Could not load the G-code for this file.`,showTravel:`Travel moves`,topLayer:`Top layer`,bottomLayer:`Bottom layer`,noSource:`No file was given to preview.`,view:{filament:`Filament`,feature:`Feature`,height:`Height`,width:`Width`},feature:{wall:`Walls`,sparseInfill:`Sparse infill`,solidInfill:`Solid infill`,bridge:`Bridge / overhang`,support:`Support`,skirt:`Skirt / brim`,gapFill:`Gap fill`,ironing:`Ironing`,primeTower:`Prime tower`},back:`Back`,backToArchives:`Back to Print Archives`,backToFiles:`Back to File Manager`,plates:`Plates`,plateN:`Plate {{n}}`},libraryTrash:{title:`Trash`,headerButton:`Trash`,headerTooltip:`View files moved to the trash`,backToFiles:`Back to File Manager`,subtitleAdmin:`Deleted files stay here for {{days}} days, then auto-delete. This view shows trashed files for all users.`,subtitleUser:`Deleted files stay here for {{days}} days, then auto-delete.`,loading:`Loading trash…`,loadError:`Could not load the trash.`,empty:`The trash is empty.`,summary:`{{count}} files · {{size}}`,emptyTrash:`Empty trash`,restore:`Restore`,purgeNow:`Delete now`,autoPurgeIn:`Auto-deletes in {{when}}`,days:`days`,retentionLabel:`Auto-delete after`,selectAll:`Select all`,selectOne:`Select {{filename}}`,selectionCount:`{{count}} selected`,bulkRestore:`Restore selected`,bulkPurge:`Delete selected`,col:{filename:`File`,folder:`Folder`,size:`Size`,deleted:`Moved to trash`,autoPurge:`Auto-deletes`,owner:`Owner`,actions:`Actions`},confirm:{purgeTitle:`Delete permanently?`,purgeBody:`{{filename}} will be deleted from disk and cannot be restored.`,emptyTitle:`Empty the trash?`,emptyBody:`All {{count}} files will be deleted from disk. This cannot be undone.`,bulkPurgeTitle:`Delete selected files permanently?`,bulkPurgeBody:`The {{count}} selected files will be deleted from disk and cannot be restored.`,cta:`Delete permanently`},toast:{restored:`File restored.`,restoreFailed:`Could not restore the file.`,purged:`File deleted permanently.`,purgeFailed:`Could not delete the file.`,emptied:`Deleted {{count}} file(s) from trash.`,emptyFailed:`Could not empty the trash.`,retentionSaved:`Auto-delete set to {{days}} days.`,retentionFailed:`Could not save retention setting.`,bulkRestored:`Restored {{count}} file(s).`,bulkPurged:`Deleted {{count}} file(s).`}},libraryPurge:{title:`Purge old files`,headerButton:`Purge old`,headerTooltip:`Bulk-move old files to trash`,description:`Sweep old files out of your library in one shot. Files with a print history are aged by their last-printed date; files that were never printed are aged by their upload date.`,ageLabel:`Move files older than`,days:`days`,includeNeverPrinted:`Include files that have never been printed`,effectsTitle:`What happens when you click Purge`,effect1:`Matching files are moved to Trash — they are not deleted from disk yet.`,effect2:`You can restore them from Trash at any time until the retention window expires.`,effect3:`After retention, the trash sweeper permanently removes them from disk.`,effect4:`Files in external (linked) folders are skipped — Bambuddy never deletes bytes it does not own.`,previewLoading:`Checking how many files match…`,previewFailed:`Could not preview the purge.`,previewSummary:`{{count}} files · {{size}} would move to trash`,andMore:`…and {{count}} more`,warning:`Trashed files still count against storage until the retention window expires. Empty the Trash afterwards to free disk immediately.`,confirmCta:`Move {{count}} to trash`,purging:`Moving to trash…`,toast:{success:`Moved {{count}} file(s) to trash.`,failed:`Could not purge files.`}},libraryAutoPurge:{enableLabel:`Auto-purge old files`,enableDescription:`Runs the admin purge once per day. Files go to Trash first — they are not deleted immediately.`,ageLabel:`Auto-purge files older than`,ageDescription:`Minimum 7 days, maximum 10 years. Uses the same age rule as the manual Purge button.`,days:`days`,includeNeverPrinted:`Include files that have never been printed`,saveFailed:`Could not save auto-purge settings.`},archivePurge:{headerButton:`Purge old`,headerTooltip:`Bulk-delete old archives`,title:`Purge old archives`,description:`Clear out old print history. Each archive is aged by its most recent print completion — reprinting an archive refreshes its age, so active work is never purged.`,ageLabel:`Delete archives not printed in the last`,days:`days`,effectsTitle:`What happens when you click Purge`,effect1:`Each matching archive is hidden from the listings and its files are removed from disk (3MF, thumbnail, timelapse, source 3MF, F3D design file, photos).`,effect2:`The archive row stays in the database so Quick Stats keeps the filament, time, cost, and energy contribution — same as the single-archive delete default.`,effect3:`Tick "Also remove from statistics" below to drop the Quick Stats contribution too (matches the single-archive delete option). That path is irreversible.`,effect4:`Reprinting an archive refreshes its age clock, so archives you still use are safe.`,purgeStatsLabel:`Also remove from statistics`,purgeStatsHint:`Drops the matching archives from Quick Stats (filament, time, cost, energy). Without this, Quick Stats keeps every contribution and only the files leave disk.`,previewLoading:`Checking how many archives match…`,previewFailed:`Could not preview the purge.`,previewSummary:`{{count}} archives · {{size}} would be removed`,andMore:`…and {{count}} more`,warning:`Files are removed from disk and cannot be restored. Download or favourite anything you want to keep before continuing.`,confirmCta:`Remove {{count}} archive(s)`,purging:`Removing…`,toast:{success:`Removed {{count}} archive(s).`,failed:`Could not purge archives.`}},archiveAutoPurge:{enableLabel:`Auto-purge old archives`,enableDescription:`Once per day, hides archives from the listings and removes their files from disk when they have not been printed within the threshold. Reprinting an archive resets the clock.`,ageLabel:`Auto-delete archives not printed in the last`,ageDescription:`Minimum 7 days, maximum 10 years. Based on the most recent print completion — reprinting an archive refreshes its age. Removes the 3MF, thumbnail, timelapse, source 3MF, F3D, and photos.`,days:`days`,purgeStatsLabel:`Also remove from statistics`,purgeStatsDescription:`When enabled, the daily sweeper also drops each purged archive from Quick Stats (filament, time, cost, energy). Default off — Quick Stats keeps the contribution, only the files leave disk.`,runNow:`Purge archives now`,saveFailed:`Could not save auto-purge settings.`},cameraTokens:{scope:{camera_stream:`Camera stream`,camwall:`Cam Wall`,overlay:`Streaming Overlay`},title:`Camera API Tokens`,navTitle:`Camera API tokens`,description:`Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Pick the scope when you create one; a token can be revoked at any time.`,loading:`Loading…`,confirmRevoke:{title:`Revoke this token?`,body:`Any device using "{{name}}" will lose access immediately. This cannot be undone.`,cancel:`Cancel`,confirm:`Revoke`},create:{scopeLabel:`Scope`,hintCameraStream:`A camera-stream token can only fetch camera streams and snapshots. Use it for Home Assistant, Frigate, or anything embedding a single camera.`,hintCamWall:`A Cam Wall token opens /camwall on a screen with no login. It can see every printer's name and state, and their camera streams. It cannot see filenames, addresses or access codes.`,hintOverlay:`A Streaming Overlay token opens /overlay/{printerId} on a screen with no login — for OBS or any live stream. It can see one printer's camera stream plus its live print status, including the filename shown on screen. It cannot see addresses or access codes.`,title:`Create new token`,nameLabel:`Token name`,namePlaceholder:`e.g. Home Assistant`,daysLabel:`Days until expiry`,submit:`Create`,hint:`Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now.`},created:{camWallUrlTitle:`Cam Wall URL for this display`,camWallUrlHint:`Open this on the screen. Anyone who can read the URL can watch the wall, so treat it like a key — revoke the token to cut the display off.`,overlayUrlTitle:`Overlay URL for OBS`,overlayUrlHint:`Add this as a Browser Source in OBS. Change the /overlay/1 number to your printer's number (from its URL on the Printers page). Anyone who can read the URL can watch the stream, so treat it like a key — revoke the token to cut it off.`,title:`Token created — copy it now`,warning:`This is the only time this token will be visible. After you close this dialog you can never view it again.`,copy:`Copy`,dismiss:`I've saved it`},list:{scope:`Scope`,myTitle:`My tokens`,allTitle:`All users (admin view)`,empty:`No tokens yet.`,name:`Name`,owner:`Owner`,prefix:`Prefix`,created:`Created`,expires:`Expires`,lastUsed:`Last used`,revoke:`Revoke`,expired:`Expired`},toast:{created:`Token created`,createFailed:`Failed to create token`,revoked:`Token revoked`,revokeFailed:`Failed to revoke token`,loadFailed:`Failed to load tokens`,copied:`Copied to clipboard`,copyFailed:`Copy failed — select and copy manually`}},forecast:{title:`Forecast`,noSpools:`No active spools found. Add spools to your inventory to see forecast data.`,noUsageData:`No usage data available — cannot project stock timeline.`,sku:`SKU`,material:`Material`,stock:`Stock`,dailyRate:`Rate`,daysLeft:`Days Left`,emptyBy:`Empty By`,reorderBy:`Reorder By`,actions:`Actions`,trend:`Trend`,estimated:`Est.`,noData:`No data`,timeframe:`Timeframe`,chartTitle:`Projected Stock — Top 5 Materials`,dashedLinesROP:`Dashed lines = reorder points`,stockLevel:`Stock Level`,reorderPoint:`Reorder Point`,safetyMargin:`Safety Margin`,trendLegend:`Trend (history-based, 95% service level)`,estimatedLegend:`Estimated (weight delta)`,noDataLegend:`No data`,ropLabel:`ROP`,ssLabel:`SS`,safetyStockLegend:`Safety stock`,stockArrivalLegend:`Stock arrival`,stockoutLegend:`Stockout`,alertCount_one:`{{count}} alert`,alertCount_other:`{{count}} alerts`,order:`Order`,save:`Save`,cancel:`Cancel`,settingsSaved:`Settings saved`,failedSaveSettings:`Failed to save settings`,globalLeadTimeSaved:`Global lead time saved`,globalLeadTime:`Global lead time`,globalLeadTimeHint:`Global lead time floor — used in reorder point calculation for all SKUs`,skuLeadTimeOverride:`Lead Time Override`,skuLeadTimeHint:`0 = use global lead time. Set >0 to override for this SKU.`,safetyMarginLabel:`Safety Margin`,effectiveLeadTime:`Effective Lead Time`,effectiveLeadTimeHint:`max(global {{global}}d, SKU {{sku}}d)`,reorderPointHint:`d̄ × LT + safety margin — order when stock hits this level`,safetyMarginHint:`Statistical safety stock (z=1.65 × σ × √LT) + user-defined buffer`,safetyMarginHintDays:`Buffer added on top of statistical safety stock.{{approx}}`,safetyMarginHintDaysApprox:` ≈ {{g}}g at current rate.`,safetyMarginHintG:`Fixed weight buffer added on top of statistical safety stock.{{approx}}`,safetyMarginHintGApprox:` ≈ {{days}}d at current rate.`,individualSpools:`Individual spools`,labelWeight:`Label`,spoolCount_one:`{{count}} spool`,spoolCount_other:`{{count}} spools`,stockBreakRisk:`Stock break risk`,stockBreakDetail:`{{days}}d remaining, lead time {{lt}}d.`,stockBreakBefore:`Stock break before replenishment`,reorderNow:`Reorder now`,reorderTriggerPassed:`Trigger date {{date}} has passed.`,shoppingList:`Shopping List`,shoppingListItems_one:`({{count}} item)`,shoppingListItems_other:`({{count}} items)`,shoppingListEmpty:`Shopping list is empty. Click the cart icon on any row to add items.`,addToCart:`Add to shopping list`,alertsSnoozed:`Mute alerts for this SKU`,alertsEnabled:`Unmute alerts for this SKU`,addedToCart:`Added to shopping list`,failedAddItem:`Failed to add item`,listView:`List`,logisticsView:`Logistics`,qty:`Qty`,weight:`Weight`,leadTime:`Lead Time`,expectedRestock:`Expected Restock`,status:`Status`,note:`Note`,pending:`Pending`,purchased:`Purchased`,received:`Received`,markPurchased:`Mark as purchased`,markReceived:`Mark as received — adds spools to Stock inventory`,resetToPending:`Reset to pending`,remove:`Remove`,clearAll:`Clear all`,downloadCsv:`CSV`,addToCartTitle:`Add to Shopping List`,byQuantity:`By Quantity`,byDuration:`By Duration`,numberOfSpools:`Number of spools`,lastHowManyDays:`Should last how many days?`,noUsageQty:`No usage data — quantity set to 1.`,noteOptional:`Note (optional)`,notePlaceholder:`e.g. for project X, urgent…`,addNSpools_one:`Add {{count}} spool`,addNSpools_other:`Add {{count}} spools`,onArrival:`On Arrival`,stockBreakIn:`Stock break in {{days}}d.`,stockRunsOutBefore:`Stock runs out before the {{lt}}d lead time elapses.`,atRate:`At {{rate}}g/day you need`,moreSpools_one:`{{count}} more spool`,moreSpools_other:`{{count}} more spools`,bridgeGap:`to bridge the gap.`,noReadAccess:`You do not have permission to view inventory forecasts.`,noWriteAccess:`You do not have permission to modify forecast settings.`}}},de:{translation:{nav:{printers:`Drucker`,archives:`Archiv`,queue:`Druckwarteschlange`,stats:`Statistiken`,profiles:`Profile`,maintenance:`Wartung`,projects:`Projekte`,finance:`Finanzen`,inventory:`Filament`,files:`Dateimanager`,makerworld:`MakerWorld`,notifications:`Benachrichtigungen`,settings:`Einstellungen`,system:`System`,collapseSidebar:`Seitenleiste einklappen`,expandSidebar:`Seitenleiste ausklappen`,update:`Aktualisieren`,updateAvailable:`Update verfügbar: v{{version}}`,updateAvailableBanner:`Version {{version}} ist verfügbar!`,viewUpdate:`Update anzeigen`,viewOnGithub:`Auf GitHub ansehen`,keyboardShortcuts:`Tastaturkürzel (?)`,switchToLight:`Zum hellen Modus wechseln`,switchToDark:`Zum dunklen Modus wechseln`,switchToSystem:`Zum Systemmodus wechseln`,smartSwitches:`Smart Switches`,logout:`Abmelden`,installApp:`App installieren`,installAppSuccess:`Bambuddy wurde installiert`},common:{plusNMore:`+{{count}} weitere`,save:`Speichern`,saving:`Speichern...`,cancel:`Abbrechen`,delete:`Löschen`,edit:`Bearbeiten`,add:`Hinzufügen`,close:`Schließen`,confirm:`Bestätigen`,loading:`Lädt...`,error:`Fehler`,errorLoading:`Fehler beim Laden`,retry:`Erneut versuchen`,success:`Erfolg`,warning:`Warnung`,enabled:`Aktiviert`,disabled:`Deaktiviert`,yes:`Ja`,no:`Nein`,on:`An`,off:`Aus`,all:`Alle`,none:`Keine`,search:`Suchen`,filter:`Filtern`,sort:`Sortieren`,refresh:`Aktualisieren`,download:`Herunterladen`,upload:`Hochladen`,uploading:`Hochladen...`,uploadFailed:`Hochladen fehlgeschlagen`,actions:`Aktionen`,status:`Status`,name:`Name`,user:`Benutzer`,description:`Beschreibung`,date:`Datum`,time:`Zeit`,hours:`Stunden`,minutes:`Minuten`,seconds:`Sekunden`,days:`Tage`,enable:`Aktivieren`,disable:`Deaktivieren`,permissions:`Berechtigungen`,noPrinters:`Keine Drucker konfiguriert`,noData:`Keine Daten verfügbar`,linkNotFound:`Link nicht gefunden`,required:`Erforderlich`,optional:`Optional`,dismiss:`Schließen`,apply:`Anwenden`,reset:`Zurücksetzen`,export:`Exportieren`,import:`Importieren`,clear:`Leeren`,selectAll:`Alle auswählen`,deselectAll:`Auswahl aufheben`,noChange:`— Keine Änderung —`,unchanged:`Unverändert`,unassigned:`Nicht zugewiesen`,unknown:`Unbekannt`,unknownError:`Unbekannter Fehler`,today:`Heute`,tomorrow:`Morgen`,asap:`Sofort`,overdue:`Überfällig`,now:`Jetzt`,collapse:`Einklappen`,expand:`Ausklappen`,previous:`Zurück`,next:`Weiter`,viewArchive:`Archiv anzeigen`,viewInFileManager:`Im Dateimanager anzeigen`,addedBy:`Hinzugefügt von {{username}}`,prints:`Drucke`,more:`+{{count}} weitere`,ascending:`Aufsteigend`,descending:`Absteigend`,back:`Zurück`,copy:`Kopieren`,copied:`Kopiert!`,printer:`Drucker`,remove:`Entfernen`,type:`Typ`,print:`Drucken`,rename:`Umbenennen`,move:`Verschieben`,create:`Erstellen`,duplicate:`Duplizieren`,left:`Links`,right:`Rechts`,run:`Ausführen`,running:`Wird ausgeführt...`},finance:{allTypes:`Alle Typen`,allCostCenters:`Alle Kostenstellen`,title:`Finanzen`,subtitle:`Wallet, persönliche Transaktionen und Kostenstellen`,noAccess:`Du hast keine Berechtigung, Finanzdaten anzuzeigen.`,personalView:`Persönliche Ansicht`,adminView:`Admin-Ansicht`,createCostCenter:`Kostenstelle erstellen`,adjustWallet:`Wallet anpassen`,addManualPrint:`Manuellen Druck nachtragen`,manageMembers:`Mitglieder der Kostenstelle verwalten`,currentBalance:`Persönlicher Kontostand`,transactions:`Transaktionen`,personalTransactions:`Persönliche Transaktionen`,costCenters:`Kostenstellen`,availableForPrinting:`Für Druckzuordnung verfügbar`,costCenterName:`Name`,budgetType:`Budgettyp`,monthlyBudget:`Monatsbudget`,totalBudget:`Gesamtbudget`,noBudget:`kein Budget gesetzt`,create:`Erstellen`,selectUser:`Benutzer auswählen`,transactionType:`Typ`,amount:`Betrag`,noCostCenter:`Keine Kostenstelle`,descriptionOptional:`Beschreibung (optional)`,applyAdjustment:`Anpassung anwenden`,memberCanPrint:`Mitglied darf drucken`,addMember:`Mitglied hinzufügen`,canPrint:`Darf drucken`,noMembers:`Keine Mitglieder zugewiesen.`,editCostCenter:`Kostenstelle bearbeiten`,myCostCenters:`Meine Kostenstellen`,costCentersHint:`Budgetgrenzen prüfen und Kosten im Blick behalten`,noCostCenters:`Keine Kostenstellen gefunden.`,owner:`Besitzer`,balance:`Kontostand`,unlimited:`Unbegrenzt`,budgetPolicyHint:`Kontostände dienen der Kostenübersicht. Drucke werden ausschließlich durch das Budget der ausgewählten Kostenstelle begrenzt; ohne Budget kann unbegrenzt gedruckt werden.`,budget:`Budget`,shared:`Geteilt`,cannotEditPrivateCostCenter:`Private Kostenstellen können hier nicht bearbeitet werden`,recentTransactions:`Aktuelle Transaktionen`,transactionsHint:`Nach Typ und Kostenstelle filtern`,first:`Erste`,prev:`Zurück`,next:`Weiter`,last:`Letzte`,pageNumberOf:`Seite {{page}} von {{total}}`,noTransactions:`Keine Transaktionen verfügbar.`,noTransactionsForFilter:`Keine Transaktionen entsprechen den ausgewählten Filtern.`,costCenter:`Kostenstelle`,balanceAfter:`Kontostand danach`,userWithId:`Benutzer #{{id}}`,partial:`Teilweise`,editTransaction:`Transaktion bearbeiten`,selectCostCenter:`Kostenstelle auswählen...`,costCenterRequired:`Bitte eine Kostenstelle auswählen`,amountExample:`z. B. 4,00`,manualAdjustmentExample:`z. B. Manuelle Anpassung`,userRequired:`Bitte einen Benutzer auswählen`,amountInvalid:`Betrag muss eine gültige Zahl sein`,createdCostCenter:`Kostenstelle erstellt`,createCostCenterFailed:`Kostenstelle konnte nicht erstellt werden`,transactionDeleted:`Transaktion gelöscht`,deleteTransactionFailed:`Transaktion konnte nicht gelöscht werden`,transactionEdited:`Transaktion aktualisiert und Ledger neu berechnet`,editTransactionFailed:`Transaktion konnte nicht bearbeitet werden`,manualPrintCreated:`Manueller Druck hinzugefügt und Ledger neu berechnet`,manualPrintFailed:`Manueller Druck konnte nicht erstellt werden`,memberSaved:`Mitglied gespeichert`,memberSaveFailed:`Mitglied konnte nicht gespeichert werden`,memberRemoved:`Mitglied entfernt`,memberRemoveFailed:`Mitglied konnte nicht entfernt werden`,costCenterNameRequired:`Kostenstellenname ist erforderlich`,costCenterUpdated:`Kostenstelle aktualisiert`,costCenterUpdateFailed:`Kostenstelle konnte nicht aktualisiert werden`,confirmDeleteCostCenter:`Kostenstelle "{{name}}" löschen?`,costCenterDeleted:`Kostenstelle gelöscht`,costCenterDeleteFailed:`Kostenstelle konnte nicht gelöscht werden`,deleteTransactionConfirm:`Diese Transaktion löschen? Die Salden werden automatisch neu berechnet.`,deposit:`Einzahlung`,withdraw:`Auszahlung`,printCharge:`Druckkosten`,deleteTransaction:`Transaktion löschen`},printers:{addPreflight:{checking:`Verbindung wird geprüft...`,warning:`Einige Verbindungsprüfungen sind fehlgeschlagen. Dieser Drucker wird möglicherweise als offline angezeigt. Prüfe die Punkte unten, behebe was möglich ist, oder speichere trotzdem.`,back:`Zurück`,saveAnyway:`Trotzdem speichern`},title:`Drucker`,addPrinter:`Drucker hinzufügen`,editPrinter:`Drucker bearbeiten`,deletePrinter:`Drucker löschen`,printerName:`Druckername`,serialNumber:`Seriennummer`,ipAddress:`IP-Adresse / Hostname`,accessCode:`Zugangscode`,model:`Modell`,nozzleCount:`Düsenanzahl`,autoArchive:`Automatische Archivierung`,status:{available:`Verfügbar`,idle:`Bereit`,printing:`Druckt`,paused:`Pausiert`,offline:`Offline`,problem:`Problem`,error:`Fehler`,finished:`Fertig`,unknown:`Unbekannt`},temperatures:{nozzle:`Düse`,bed:`Druckbett`,chamber:`Kammer`},heaterHistory:{title:`Heizungsverlauf`,openLabel:`Heizungsverlauf anzeigen`,nozzle:`Düse`,nozzle2:`Düse 2`,bed:`Druckbett`,chamber:`Kammer`,error:`Verlauf konnte nicht geladen werden`,empty:`Noch keine Daten aufgezeichnet`},progress:`{{percent}}% abgeschlossen`,timeRemaining:`Noch {{time}}`,deleteConfirm:`Möchten Sie "{{name}}" wirklich löschen?`,maintenanceOk:`Wartung OK`,maintenanceWarning:`{{count}} Warnung`,maintenanceWarning_plural:`{{count}} Warnungen`,maintenanceDue:`{{count}} fällig`,maintenanceDue_plural:`{{count}} fällig`,sort:{name:`Name`,status:`Status`,model:`Modell`,location:`Standort`,eta:`Restzeit`,ascending:`Aufsteigend sortieren`,descending:`Absteigend sortieren`},cardSize:{small:`Kleine Karten`,medium:`Mittlere Karten`,large:`Große Karten`,extraLarge:`Extra große Karten`},pageView:{openCamWallPage:`Kamera-Wand als Seite öffnen`,cards:`Karten`,camWall:`Kamera-Wand`},camWall:{page:{tokenRejected:`Dieser Kamera-Wand-Link ist nicht mehr gültig. Das Token ist möglicherweise abgelaufen oder wurde widerrufen.`,loadFailed:`Die Drucker konnten nicht geladen werden.`},noPrinters:`Keine Drucker anzuzeigen`,noSignal:`Kein Signal`,live:`Live`,snap:`Foto`,off:`Aus`,summary:`{{live}} live, {{snap}} Schnappschüsse, {{total}} insgesamt`,layer:`Schicht {{cur}}/{{total}}`,timeLeft:`noch {{time}}`,statusMode:{off:`Aus`,compact:`Kompakt`,full:`Voll`},settings:{title:`Kamera-Wand-Einstellungen`,maxLive:`Max. Live-Streams`,maxLiveHint:`Wie viele Kacheln gleichzeitig live streamen. Andere aktualisieren als Schnappschüsse.`,snapshotInterval:`Schnappschuss-Intervall (Sekunden)`,snapshotIntervalHint:`Wie oft Nicht-Live-Kacheln einen neuen Schnappschuss abrufen.`,statusOverlay:`Status-Overlay`,statusOverlayHint:`Kompakt: nur Status-Plakette. Voll: + Fortschritt, Schicht, Restzeit.`}},hideOffline:`Offline ausblenden`,nextAvailable:`Nächster verfügbar`,powerOn:`Einschalten`,offlinePrintersWithPlugs:`Offline-Drucker mit Smart-Plugs`,noPrintersConfigured:`Noch keine Drucker konfiguriert`,search:`Drucker suchen...`,noSearchResults:`Keine Drucker entsprechen deiner Suche oder deinen Filtern`,filter:{allStatuses:`Alle Status`,allLocations:`Alle Standorte`},toolbar:{filters:`Filter`,view:`Ansicht`,actions:`Aktionen`},readyToPrint:`Druckbereit`,external:`Extern`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Druckarchive löschen`,noLabel:`Keine Bezeichnung`,printPreview:`Druckvorschau`,width:`Breite`,height:`Höhe`,noObjectsFound:`Keine Objekte gefunden`,objectsLoadedOnPrintStart:`Objekte werden beim Druckstart geladen`,willBeSkipped:`Wird übersprungen`,name:`Name`,serialCannotBeChanged:`Seriennummer kann nicht geändert werden`,locationHelp:`Dient zur Gruppierung von Druckern und zum Filtern von Warteschlangenaufträgen`,wifiSignal:{veryWeak:`Sehr schwach`,weak:`Schwach`,fair:`Ausreichend`,good:`Gut`,excellent:`Ausgezeichnet`},maintenanceUpToDate:`Alle Wartungen aktuell - Klicken zum Anzeigen`,maintenance:{title:`In Wartung`,subtitle:`Dieser Drucker ist pausiert — keine Verbindung, nicht für die Warteschlange verfügbar, keine Benachrichtigungen.`,pillLabel:`Wartung`,exitButton:`Wartung beenden`,menuEnter:`In den Wartungsmodus wechseln`,menuExit:`Wartungsmodus beenden`,toastEntered:`{{name}} ist jetzt im Wartungsmodus`,toastExited:`{{name}} ist wieder online`,confirmMidPrintTitle:`Wartungsmodus während des Drucks aktivieren?`,confirmMidPrintMessage:`{{name}} druckt gerade. Der Wartungsmodus trennt die MQTT-Verbindung und beendet das Fortschritts-Tracking sowie Abschlussbenachrichtigungen für diesen Auftrag. Fortfahren?`,editFieldLabel:`Wartungsmodus`,editFieldHelp:`Wenn aktiviert, ist dieser Drucker von MQTT, Warteschlangenversand und Benachrichtigungen pausiert — nützlich für Reparaturen, parallele Bambuddy-Installationen oder temporäre Außerbetriebnahme.`},chamberLightOn:`Kammerbeleuchtung einschalten`,chamberLightOff:`Kammerbeleuchtung ausschalten`,files:`Dateien`,browseFiles:`Druckerdateien durchsuchen`,autoOffAfterPrint:`Automatisches Ausschalten nach Druck`,autoOffExecuted:`Auto-off wurde ausgeführt - Drucker einschalten zum Zurücksetzen`,hmsErrors:`HMS-Fehler`,viewHmsErrors:`{{count}} HMS-Fehler anzeigen`,resume:`Fortsetzen`,pause:`Pausieren`,stop:`Stoppen`,camera:`Kamera`,skipObject:`Objekt überspringen`,reconnect:`Neu verbinden`,forceRefresh:`Aktualisierung erzwingen`,forceRefreshSuccess:`Aktualisierung angefordert`,mqttDebug:`MQTT-Debug`,printerInformation:`Druckerinformationen`,copyToClipboard:`Kopieren`,copied:`Kopiert!`,state:`Zustand`,wifiSignalLabel:`WLAN-Signal`,developerMode:`Entwicklermodus`,enabled:`Aktiviert`,disabled:`Deaktiviert`,addedOn:`Hinzugefügt`,sdCard:`SD-Karte`,inserted:`Eingelegt`,notInserted:`Nicht eingelegt`,totalPrintHours:`Druckstunden`,activeNozzle:`Aktiv: {{nozzle}} Düse`,amsSwitchInletTooltip:`Filamentweiche IN-{{inlet}} ({{side}}) — versorgt beide Düsen`,nozzleRack:`Düsenhalter`,nozzleDocked:`Angedockt`,nozzleMounted:`Montiert`,nozzleActive:`Aktiv`,nozzleIdle:`Inaktiv`,nozzleDiameter:`Durchmesser`,nozzleType:`Typ`,nozzleStatus:`Status`,nozzleFilament:`Filament`,nozzleWear:`Verschleiß`,nozzleMaxTemp:`Max. Temp`,nozzleSerial:`Seriennr.`,nozzleHardenedSteel:`Gehärteter Stahl`,nozzleStainlessSteel:`Edelstahl`,nozzleTungstenCarbide:`Wolframkarbid`,nozzleFlow:`Durchfluss`,nozzleHighFlow:`Hoher Durchfluss`,nozzleStandardFlow:`Standard`,firmwareUpdate:`Firmware-Update`,firmwareInstructions:`Gehen Sie auf dem Touchscreen des Druckers zu`,firmwareNav:`Navigieren Sie zu`,settings:`Einstellungen`,firmware:`Firmware`,discoverPrinters:`Drucker entdecken`,searching:`Suche...`,manualEntry:`Manuelle Eingabe`,addFromCloud:`Aus Cloud hinzufügen`,toast:{printerDeleted:`Drucker gelöscht`,missingSpoolAssignment:`Druck gestartet auf {{printer}}. Fehlende Spulenzuordnung für: {{slots}}`,killSwitchTriggered:`Der Billing-Kill-Switch hat einen nicht autorisierten Druck auf {{printer}} gestoppt: {{filename}}`,billingChargeFailed:`Die Abrechnung für {{filename}} auf {{printer}} ist fehlgeschlagen. Die Budgetreservierung bleibt bestehen; prüfe die Serverprotokolle.`,assignmentVerified:`Filament in Slot {{slot}} geladen ({{printer}})`,assignmentVerifiedNoKprofile:`Slot {{slot}} auf {{printer}} geladen, aber das Fluss-Kalibrierungsprofil (K-Profil) wurde nicht übernommen`,assignmentNotConfirmed:`Zuordnung für Slot {{slot}} auf {{printer}} konnte nicht bestätigt werden – bitte den AMS-Slot prüfen`,printerAdded:`Drucker hinzugefügt`,printerUpdated:`Drucker aktualisiert`,failedToDelete:`Drucker konnte nicht gelöscht werden`,failedToAdd:`Drucker konnte nicht hinzugefügt werden`,connectionFailedNotAdded:`Keine Verbindung zum Drucker möglich. Prüfen Sie IP-Adresse, Seriennummer und Zugangscode und stellen Sie sicher, dass der Nur-LAN-Modus aktiv ist. Der Drucker wurde nicht hinzugefügt.`,failedToUpdate:`Drucker konnte nicht aktualisiert werden`,commandSent:`Befehl gesendet`,failedToSendCommand:`Befehl konnte nicht gesendet werden`,turnedOn:`{{name}} eingeschaltet`,failedToPowerOn:`{{name}} konnte nicht eingeschaltet werden`,scriptTriggered:`Skript ausgelöst`,printStopped:`Druck gestoppt`,printPaused:`Druck pausiert`,printResumed:`Druck fortgesetzt`,referenceDeleted:`Referenz gelöscht`,detectionAreaSaved:`Erkennungsbereich gespeichert`,failedToRunScript:`Skript konnte nicht ausgeführt werden`,failedToStopPrint:`Druck konnte nicht gestoppt werden`,failedToPausePrint:`Druck konnte nicht pausiert werden`,failedToResumePrint:`Druck konnte nicht fortgesetzt werden`,failedToControlChamberLight:`Kammerbeleuchtung konnte nicht gesteuert werden`,failedToSetSpeed:`Druckgeschwindigkeit konnte nicht eingestellt werden`,failedToUpdateSetting:`Einstellung konnte nicht aktualisiert werden`,failedToSkipObjects:`Objekte konnten nicht übersprungen werden`,failedToRereadRfid:`RFID konnte nicht erneut gelesen werden`,failedToCheckPlate:`Platte konnte nicht überprüft werden`,failedToUpdateLabel:`Bezeichnung konnte nicht aktualisiert werden`,failedToDeleteReference:`Referenz konnte nicht gelöscht werden`,failedToSaveDetectionArea:`Erkennungsbereich konnte nicht gespeichert werden`,plateCheckEnabled:`Plattenprüfung aktiviert`,plateCheckDisabled:`Plattenprüfung deaktiviert`,calibrationSaved:`Kalibrierung gespeichert!`,calibrationFailed:`Kalibrierung fehlgeschlagen`,rfidRereadInitiated:`RFID-Neueinlesen gestartet`,loadInitiated:`Filament wird geladen…`,unloadInitiated:`Filament wird entladen…`,failedToLoad:`Filament konnte nicht geladen werden`,failedToUnload:`Filament konnte nicht entladen werden`},connection:{connected:`Verbunden`,offline:`Offline`},plateStatus:{markCleared:`Platte als freigegeben markieren`,cleared:`Platte freigegeben`,notCleared:`Platte nicht freigegeben`,inUse:`Platte in Benutzung`},queue:{inQueue:`{{count}} Druck in Warteschlange`,inQueue_plural:`{{count}} Drucke in Warteschlange`},controls:`Steuerung`,rfid:{reread:`RFID neu lesen`},ams:{load:`Laden`,unload:`Entladen`,feedTitle:`{{slot}} in welche Düse laden?`,feedPrompt:`Der Filament Track Switch kann diesen Slot zu beiden Hotends leiten. Wähle, welches beschickt werden soll.`,feedLeft:`Linke Düse`,feedRight:`Rechte Düse`,feedAlreadyLoaded:`Bereits geladen`,switchNotReady:`Der Filament Track Switch ist noch nicht eingerichtet. Weise am Drucker jedem AMS einen Eingang zu und versuche es erneut.`},bedJog:{limitWarning:`Verfahrwege werden bei manuellen Bewegungen nicht begrenzt – ein Firmware-Fehler von Bambu ignoriert die Software-Endschalter bei Remote-Befehlen. Bewegen Sie vorsichtig, um Kollisionen zu vermeiden.`,title:`Jog-Steuerung`,bed:`Bett`,step:`Schritt (mm)`,up:`Platte hoch`,down:`Platte runter`,toolheadUp:`Druckkopf hoch`,toolheadDown:`Druckkopf runter`,disabledWhilePrinting:`Während des Drucks deaktiviert`,notHomedTitle:`Drucker ist nicht referenziert`,notHomedMessage:`Der Drucker wurde seit dem letzten Druck nicht referenziert. Führen Sie zuerst die automatische Referenzfahrt aus (parkt den Werkzeugkopf und referenziert dann X, Y und Z) oder bewegen Sie trotzdem — die Software-Endschalter werden dabei umgangen.`,homeZ:`Automatische Referenzfahrt`,moveAnyway:`Trotzdem bewegen`,homingStarted:`Drucker wird automatisch referenziert…`},permission:{noAdd:`Sie haben keine Berechtigung, Drucker hinzuzufügen`,noEdit:`Sie haben keine Berechtigung, Drucker zu bearbeiten`,noDelete:`Sie haben keine Berechtigung, Drucker zu löschen`,noControl:`Sie haben keine Berechtigung, Drucker zu steuern`,noFiles:`Sie haben keine Berechtigung, auf Druckerdateien zuzugreifen`,noAmsRfid:`Sie haben keine Berechtigung, AMS-RFID erneut zu lesen`,noSmartPlugControl:`Sie haben keine Berechtigung, Smart Plugs zu steuern`,noCamera:`Sie haben keine Berechtigung, Kameras anzuzeigen`},modal:{addTitle:`Drucker hinzufügen`,editTitle:`Drucker bearbeiten`,myPrinter:`Mein Drucker`,selectModel:`Modell auswählen...`,locationGroup:`Standort / Gruppe (optional)`,locationPlaceholder:`z.B. Werkstatt, Büro, Keller`,autoArchiveLabel:`Abgeschlossene Drucke automatisch archivieren`,fromPrinterSettings:`Aus Druckereinstellungen`,modelOptional:`Modell (optional)`,saveChanges:`Änderungen speichern`},skipObjects:{tooltip:`Objekte überspringen`,onlyWhilePrinting:`Objekte überspringen (nur während des Drucks)`,requiresMultiple:`Objekte überspringen (erfordert 2+ Objekte)`,title:`Objekte überspringen`,matchIdsInfo:`IDs mit Drucker-Display abgleichen`,printerShowsIds:`Der Druckerbildschirm zeigt Objekt-IDs auf der Bauplatte`,skipSelected:`Ausgewählte überspringen`,skipping:`Überspringe...`,noObjectsSelected:`Keine Objekte ausgewählt`,selectObjectsToSkip:`Wählen Sie Objekte aus, die Sie vom aktuellen Druck überspringen möchten`,skipped:`übersprungen`,objectsSkipped:`Objekte übersprungen`,activeCount:`{{count}} aktiv`,waitForLayer:`Warten Sie auf Schicht 2+ zum Überspringen von Objekten (aktuell Schicht {{layer}})`,skip:`Überspringen`,confirmTitle:`Objekt überspringen?`,confirmMessage:`Möchten Sie "{{name}}" wirklich überspringen? Dies kann nicht rückgängig gemacht werden.`,confirmAllMessage:`Alle verbleibenden Objekte sind ausgewählt. Dadurch wird der Druckauftrag beendet. Fortfahren?`,confirmMultipleMessage:`{{count}} ausgewählte Objekte überspringen? Dies kann nicht rückgängig gemacht werden.`},confirm:{deleteTitle:`Drucker löschen`,deleteMessage:`Möchten Sie "{{name}}" wirklich löschen? Alle Verbindungseinstellungen werden entfernt.`,deleteArchivesNote:`Der gesamte Druckverlauf für diesen Drucker wird dauerhaft gelöscht.`,keepArchivesNote:`Der Druckverlauf wird beibehalten, aber nicht mehr mit diesem Drucker verknüpft.`,stopTitle:`Druck stoppen`,stopMessage:`Möchten Sie den aktuellen Druck auf "{{name}}" wirklich stoppen? Der Druckauftrag wird abgebrochen.`,stopButton:`Druck stoppen`,pauseTitle:`Druck pausieren`,pauseMessage:`Möchten Sie den aktuellen Druck auf "{{name}}" wirklich pausieren?`,pauseButton:`Druck pausieren`,resumeTitle:`Druck fortsetzen`,resumeMessage:`Möchten Sie den Druck auf "{{name}}" fortsetzen?`,resumeButton:`Druck fortsetzen`,powerOnTitle:`Drucker einschalten`,powerOnMessage:`Möchten Sie die Stromversorgung für "{{name}}" wirklich EINSCHALTEN?`,powerOnButton:`Einschalten`,powerOffTitle:`Drucker ausschalten`,powerOffMessage:`Möchten Sie die Stromversorgung für "{{name}}" wirklich AUSSCHALTEN?`,powerOffWarning:`WARNUNG: "{{name}}" druckt gerade! Möchten Sie die Stromversorgung wirklich AUSSCHALTEN? Dies unterbricht den Druck und kann den Drucker beschädigen.`,powerOffButton:`Ausschalten`,haToggleTitle:`"{{name}}" umschalten`,haToggleMessage:`Home-Assistant-Entität {{entity}} umschalten? Das kann die Stromversorgung ausschalten, falls sie gerade an ist.`,haToggleWarning:`WARNUNG: "{{name}}" druckt gerade! Umschalten von {{entity}} kann die Stromversorgung trennen und den Druck abbrechen. Fortfahren?`,haToggleButton:`Umschalten`},bulk:{select:`Auswählen`,selectAll:`Alle auswählen`,selectByLocation:`Nach Standort auswählen`,selected:`{{count}} ausgewählt`,actions:{stop:`Stoppen`,pause:`Pausieren`,resume:`Fortsetzen`,clearPlate:`Druckbett leeren`,clearHMS:`Benachrichtigungen löschen`},confirm:{stopTitle:`{{count}} Drucke stoppen`,stopMessage:`Dies wird aktive Drucke auf {{count}} Drucker(n) abbrechen. Diese Aktion kann nicht rückgängig gemacht werden.`,stopButton:`Alle stoppen`,pauseTitle:`{{count}} Drucke pausieren`,pauseMessage:`Dies wird aktive Drucke auf {{count}} Drucker(n) pausieren.`,pauseButton:`Alle pausieren`,clearPlateTitle:`{{count}} Druckbetten leeren`,clearPlateMessage:`Dies wird das Druckbett auf {{count}} Drucker(n) leeren und kann wartende Aufträge starten.`,clearPlateButton:`Alle leeren`},success:`{{action}} auf {{count}} Drucker(n) abgeschlossen`,partial:`{{succeeded}} erfolgreich, {{failed}} fehlgeschlagen`,noneApplicable:`Keine ausgewählten Drucker sind im richtigen Zustand für diese Aktion`,selectByState:`Nach Status auswählen`},discovery:{title:`Drucker entdecken`,searching:`Suche...`,scanning:`Scanne...`,scanProgress:`Scanne... {{scanned}}/{{total}}`,foundPrinters:`{{count}} Drucker gefunden`,noPrintersFound:`Keine Drucker gefunden`,noPrintersFoundSubnet:`Keine Drucker im angegebenen Subnetz gefunden.`,noPrintersFoundNetwork:`Keine Drucker im Netzwerk gefunden.`,allConfigured:`Alle erkannten Drucker sind bereits konfiguriert.`,alreadyAdded:`Bereits hinzugefügt`,select:`Auswählen`,manualEntry:`Manuelle Eingabe`,addFromCloud:`Aus Cloud hinzufügen`,subnetToScan:`Zu scannendes Subnetz`,dockerNote:`Docker erkannt. Geben Sie das Subnetz Ihres Druckers in CIDR-Notation ein. Erfordert network_mode: host in docker-compose.yml.`,scanSubnet:`Subnetz nach Druckern scannen`,discoverNetwork:`Drucker im Netzwerk suchen`,scanningSubnet:`Subnetz wird nach Bambu-Druckern gescannt...`,scanningNetwork:`Netzwerk wird gescannt...`,serialRequired:`Seriennummer erforderlich`,unknown:`Unbekannt`,failedToStart:`Erkennung konnte nicht gestartet werden`,customSubnetOption:`Eigenes Subnetz...`,customSubnetLabel:`Eigenes Subnetz (CIDR)`,customSubnetNote:`Wähle ein eigenes Subnetz, wenn dein Drucker in einem anderen Netzwerk als dieser Server steht. Die Ports FTP (990) und MQTT (8883) müssen über die Routinggrenze erreichbar sein.`},drying:{start:`Trocknung starten`,stop:`Trocknung stoppen`,temperature:`Temperatur`,duration:`Dauer`,hours:`Stunden`,timeRemaining:`{{time}} verbleibend`,active:`Trocknung`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`Trocknung nicht unterstützt`,powerRequired:`AMS-Netzteil anschließen, um Trocknung zu aktivieren`,cannotDryNow:`AMS kann das Trocknen gerade nicht starten`,startingDrying:`Trocknung wird gestartet...`,toastCommandSent:`Trocknungsbefehl gesendet`,toastStopped:`Trocknung gestoppt`,toastNotStarted:`Der Drucker hat den Befehl angenommen, aber das AMS hat die Trocknung nicht gestartet. Prüfe, ob das AMS-Netzteil angeschlossen ist und der Drucker im Leerlauf ist.`,screenOnly:`Die AMS-Trocknung kann bei diesem Drucker nur am Bildschirm des Druckers selbst gesteuert werden (Einschränkung von Bambu)`,stoppingDrying:`Trocknung wird gestoppt...`,rotateTray:`Spule während der Trocknung drehen`,rotateUnavailableReason:`Nicht verfügbar — in diesem AMS ist ein Slot zum Druckkopf hin geladen. Die Spule ist durch den Zuführschlauch blockiert und kann nicht rotieren. Filament zuerst zurückziehen.`,startMode:`Startzeit`,modeNow:`Jetzt`,modeDelay:`Nach Verzögerung`,modeAtTime:`Zu Uhrzeit`,schedule:`Planen`,scheduledFor:`Trocknung geplant für {{time}}`,scheduledAsap:`Trocknung geplant (wartet auf Drucker)`,cancelScheduled:`Geplante Trocknung abbrechen`,scheduleFailed:`Trocknung konnte nicht geplant werden`,retractFilament:`Filament am AMS-Ausgang zurückziehen, um die Trocknung zu starten`,waitingAmsNotFound:`Warten, bis das AMS erkannt wird`,waitingOffline:`Warten, bis der Drucker online ist`,waitingPrinterBusy:`Warten, bis der Drucker frei ist`,waitingAlreadyDrying:`Warten, bis der laufende Trocknungszyklus beendet ist`,waitingInterrupted:`Unterbrochen, startet erneut, sobald der Drucker frei ist`,scheduleFailedReason:`Geplante Trocknung fehlgeschlagen: {{reason}}`,scheduleFailedUnknown:`Unbekannter Fehler`,dismissFailed:`Ausblenden`},amsBackup:{titleOn:`AMS Filament Backup ist EIN. Zum Deaktivieren klicken.`,titleOff:`AMS Filament Backup ist AUS. Zum Aktivieren klicken.`,titleUnknown:`AMS-Filament-Backup-Status auf diesem Drucker nicht verfügbar.`,toastEnabled:`AMS Filament Backup aktiviert`,toastDisabled:`AMS Filament Backup deaktiviert`,modalTitle:`AMS Filament Backup`,modalHelp:`Wenn der aktive Slot leer wird, wechselt der Drucker in dieser Reihenfolge zu Slots mit demselben Preset und derselben Farbe.`,modalNoSlots:`Kein Filament geladen.`,modalNoPairs:`Keine Backup-Paare — keine zwei Slots teilen sich Filament-Preset und Farbe.`,extruderRightShort:`R`,extruderLeftShort:`L`,stateOn:`Aktiviert`,stateOff:`Deaktiviert`,stateUnknown:`Auf diesem Drucker nicht unterstützt`},activeJobSlot:{title:`Dieser Slot ist Filament {{n}} im aktiven Druck`,ariaLabel:`Aktiver Druck-Slot {{n}}`},expectedSlot:{title:`Der Drucker wartet auf Filament in diesem Slot`,ariaLabel:`Erwarteter Filament-Slot {{n}}`,label:`{{ams}} · Slot {{slot}}`,external:`Externe Spule`},filaments:`Filamente`,externalSpool:{hide:`Externe Spule ausblenden`,show:`Externe Spule einblenden`},openCameraOverlay:`Kamera-Overlay öffnen`,openCameraWindow:`Kamera in neuem Fenster öffnen`,firmwareUpdateAvailable:`Firmware-Update verfügbar: {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — Aktuell`,firmwareUpdateButton:`Aktualisieren`,plateDetection:{noPermission:`Sie haben keine Berechtigung, Drucker zu aktualisieren`,enabledClick:`Plattenprüfung aktiviert - Klicken zum Deaktivieren`,disabledClick:`Plattenprüfung deaktiviert - Klicken zum Aktivieren`,manageCalibration:`Platten-Erkennungskalibrierung verwalten`,calibrationRequired:`Kalibrierung erforderlich`,calibrationInstructions:`Bitte stellen Sie sicher, dass die Druckplatte <strong>vollständig leer</strong> ist, und klicken Sie dann auf Kalibrieren.`,calibrationDescription:`Die Kalibrierung erfasst ein Referenzbild der leeren Platte. Zukünftige Prüfungen vergleichen mit dieser Referenz, um Objekte zu erkennen.`,calibrationTip:`<strong>Tipp:</strong> Sie können bis zu 5 Kalibrierungen für verschiedene Platten speichern. Das System verwendet automatisch die beste Übereinstimmung bei der Prüfung.`,plateEmpty:`Platte erscheint leer`,objectsDetected:`Objekte auf Platte erkannt`,confidence:`Konfidenz`,difference:`Differenz`,analysisPreview:`Analysevorschau:`,analysisLegend:`Grüner Rahmen = Erkennungsbereich, Rote Überlagerung = Unterschiede zur Kalibrierung`,savedReferences:`Gespeicherte Referenzen ({{count}}/{{max}})`,deleteReference:`Referenz löschen`,labelPlaceholder:`Bezeichnung...`,clickToEdit:`{{label}} - Zum Bearbeiten klicken`,clickToAddLabel:`Zum Hinzufügen einer Bezeichnung klicken`},speed:{title:`Druckgeschwindigkeit`,silent:`Leise (50%)`,standard:`Standard (100%)`,sport:`Sport (124%)`,ludicrous:`Ludicrous (166%)`},airduct:{title:`Luftkanal-Modus`,cooling:`Kühlen`,heating:`Heizen`},noSdCard:`Keine SD`,door:{open:`Offen`,closed:`Zu`},fans:{partCooling:`Bauteilkühlung`,auxiliary:`Hilfsventilator`,leftAuxiliary:`Linker Hilfsventilator`,exhaust:`Abluft`,chamber:`Kammerventilator`},clickToViewHmsErrors:`Klicken, um HMS-Fehler anzuzeigen`,aiDetection:{safe:`Sicher`,warning:`Warnung`,failure:`Fehldruck`,idle:`Bereit`,error:`Prüft nicht`,unknown:`Startet`,tooltipError:`KI-Fehlererkennung prüft diesen Druck nicht: {{reason}} - klicken für Details`,tooltipUnknown:`KI-Fehlererkennung: warte auf das erste Ergebnis - klicken für Details`,errorHint:`Dieser Druck wird nicht geprüft. Die Erkennung läuft automatisch weiter, sobald das Problem unten behoben ist.`,tooltip:`KI-Fehlererkennung: {{status}} (Score {{score}}) - klicken für Details`,tooltipIdle:`KI-Fehlererkennung aktiviert - Überwachung startet mit dem nächsten Druck - klicken für Details`,modalTitle:`KI-Fehlererkennung - {{name}}`,currentStatus:`Status`,score:`Score`,framesAnalyzed:`Analysierte Bilder`,idleHint:`Derzeit wird kein Druck überwacht. Die Überwachung startet automatisch mit dem nächsten Druck.`,lastError:`Letzter Fehler`,openSettings:`Einstellungen öffnen`},estimatedCompletion:`Geschätzte Fertigstellungszeit`,plateNumber:`Platte {{number}}`,slotOptions:`Slot-Optionen`,amsPopup:{friendlyName:`AMS-Name`,friendlyNamePlaceholder:`z. B. AMS-Anzeigename`,serialNumber:`Seriennummer`,firmwareVersion:`Firmware`,save:`Speichern`,clear:`Löschen`,noEditPermission:`Sie haben keine Berechtigung, AMS-Einheiten umzubenennen`},firmwareModal:{title:`Firmware-Update`,titleUpToDate:`Firmware-Info`,currentVersion:`Aktuell:`,latestVersion:`Neueste:`,releaseNotes:`Versionshinweise`,checkingPrereqs:`Prüfe Voraussetzungen...`,sdCardReady:`SD-Karte bereit. Klicken Sie unten, um die Firmware hochzuladen.`,uploadedSuccess:`Firmware auf SD-Karte hochgeladen!`,applyInstructions:`So wenden Sie das Update auf Ihrem Drucker an:`,step1:`Gehen Sie auf dem Touchscreen des Druckers zu <strong>Einstellungen</strong>`,step2:`Navigieren Sie zu <strong>Firmware</strong>`,step3:`Wählen Sie <strong>Update von SD-Karte</strong>`,step4:`Das Update dauert 10-20 Minuten`,done:`Fertig`,starting:`Starte...`,uploadFirmware:`Firmware hochladen`,uploadFailed:`Upload fehlgeschlagen: {{error}}`,uploadedToast:`Firmware hochgeladen! Starten Sie das Update vom Druckerbildschirm.`,availableVersions:`Verfügbare Versionen`,usable:`Installierbar`,unavailable:`Nicht verfügbar`,installed:`Installiert`,newerBadge:`neuer`,olderBadge:`älter`,currentBadge:`aktuell`},accessCodePlaceholder:`Leer lassen, um den aktuellen zu behalten`,roi:{title:`Erkennungsbereich (ROI)`,xStart:`X-Start`,yStart:`Y-Start`,width:`Breite`,height:`Höhe`,instruction:`Passen Sie den Erkennungsbereich an, um sich auf die Druckplatte zu konzentrieren. Der grüne Rahmen in der Vorschau zeigt den aktuellen Bereich.`},developerModeWarning:`Der Entwickler-LAN-Modus ist nicht aktiviert auf: {{names}}. Einige Funktionen funktionieren möglicherweise nicht.`,howToEnable:`Aktivieren`,incompatibleFile:`Diese Datei wurde für {{slicedFor}} geslicet, aber dieser Drucker ist ein {{printerModel}}`,dropNotPrintable:`Nur .gcode- und .gcode.3mf-Dateien können gedruckt werden`,dropToPrint:`Zum Drucken ablegen`,dropToQueue:`Zum Einreihen ablegen`},archives:{media:{title:`Druckvideos`,download:`Druckvideos herunterladen`,searching:`Der Drucker wird nach Videos durchsucht…`,searchFailed:`Der Drucker konnte nicht nach Videos durchsucht werden.`,none:`Für diesen Druck wurden keine Zeitraffer- oder IP-Kamera-Clips gefunden.`,attachedTimelapse:`Angehängter Zeitraffer`,printerFiles:`Noch auf dem Drucker vorhandene Dateien`,downloadSelected:`Auswahl herunterladen`,printerMissing:`Der Drucker ist nicht mehr konfiguriert`,timelapseUnavailable:`Das Zeitrafferverzeichnis konnte nicht gelesen werden`,ipcamUnavailable:`Das IP-Kamera-Verzeichnis konnte nicht gelesen werden`},title:`Druckarchiv`,no3mfBanner:{title:`Einige kürzliche Drucke konnten nicht mit Vorschaubild archiviert werden`,body:`Der Slicer hat die .gcode.3mf-Datei nicht auf der SD-Karte des Druckers hinterlegt, daher konnte Bambuddy weder Vorschaubild noch Slicer-Metadaten abrufen. Üblicherweise liegt das daran, dass "Gesendete Dateien auf externem Speicher speichern" im Slicer (Geräte-Tab in Bambu Studio / OrcaSlicer) deaktiviert ist.`,docsLink:`Installationsschritt 4 anzeigen`,docsLinkInternalStorage:`Warum das passiert`,titleInternalStorage:`Einige kürzliche Drucke blieben im internen Speicher des Druckers`,bodyInternalStorage:`Bambu Studio hat die geslicte Datei im internen Speicher des Druckers statt auf der Karte abgelegt, daher gab es für Bambuddy nichts über FTP zu lesen. Bei der H2-Serie, dem P2S und dem X2D macht die Schaltfläche "Drucken" das immer — nur "Senden" bietet eine Auswahl, und auch die steht standardmäßig auf "Cache". Diese Drucke werden weiterhin mit Namen und Zeiten archiviert, nur ohne Vorschaubild und Slicer-Metadaten. Für vollständige Archive den Druck aus Bambuddy starten oder in OrcaSlicer slicen — oder in Bambu Studio "Senden" mit "Extern" verwenden und den Druck danach starten. Alle setzen eine Karte oder einen Stick im Drucker voraus.`,titleNoExternalStorage:`Einige kürzliche Drucke konnten nicht archiviert werden — kein Speicher im Drucker`,bodyNoExternalStorage:`Der Drucker meldet weder Karte noch Stick im Steckplatz, daher hatte die geslicte Datei keinen Ablageort und Bambuddy nichts zu lesen. Legen Sie einen ein, dann wird der nächste Druck vollständig archiviert.`,titleInternalHistory:`Einige kürzliche Drucke wurden aus einer Datei gestartet, die bereits auf dem Drucker lag`,bodyInternalHistory:`Diese Drucke liefen aus der eigenen Bibliothek des Druckers — ein erneuter Druck über sein Display, ein Start aus Handy oder eine früher gesendete und später gedruckte Datei. Bambuddy liest Druckdateien über FTP, und das bedient nur Karte oder Stick, während der Drucker diese Bibliothek in einem Bereich ablegt, den FTP nicht erreicht — es gab also keine 3MF zu lesen. Keine Slicer-Einstellung ändert das, denn für diese Drucke wurde nichts gesendet. Sie werden weiterhin mit Namen und Zeiten archiviert, und unter "Archiv bearbeiten" lässt sich das verbrauchte Filament von Hand eintragen. Für ein vollständiges Archiv starten Sie den Druck stattdessen aus Bambuddy oder aus Ihrem Slicer.`,titleFtpsCooloff:`Einige kürzliche Drucke konnten nicht archiviert werden — der Drucker hat die Dateiverbindung abgewiesen`,bodyFtpsCooloff:`Bambuddy hat den Dateiübertragungs-Port des Druckers (FTPS 990) geöffnet, und der Drucker hat mit etwas geantwortet, das kein TLS ist. Deshalb ließ sich nichts von ihm lesen. Diese Drucke sind weiterhin mit Namen und Zeiten archiviert, nur ohne Vorschaubild und Slicer-Metadaten. Das ist keine Slicer-Einstellung und nichts, was Sie geändert haben — dieselben Modelle und Firmware-Stände laufen auf anderen Installationen normal, und ein betroffener Drucker arbeitet später meist von selbst wieder. Nach einem solchen Fehler pausiert Bambuddy die Übertragungen zu diesem Drucker fünf Minuten lang und holt die Datei nach Ablauf der Pause erneut; eine kurze Episode behebt sich damit von selbst, eine weiterhin leere Karte bedeutet, dass die Abweisung länger anhielt als der zweite Versuch. Was das auslöst, ist noch nicht bekannt. Wenn es wiederholt auftritt, aktivieren Sie auf der Seite System die Debug-Protokollierung und hängen Sie ein Support-Paket an Ihre Meldung an.`,titleFtpTransferFailed:`Einige aktuelle Drucke konnten nicht archiviert werden — die Dateiübertragung hat zu lange gedauert`,bodyFtpTransferFailed:`Die geslicete Datei lag auf der Karte des Druckers und der Drucker hat sie auch ausgeliefert, aber die Übertragung wurde nicht in der erlaubten Zeit fertig. Zum Druckstart bedient der Drucker gleichzeitig seine Kamera, seine Statusmeldungen und den Auftrags-Upload, und eine große 3MF kommt dagegen nicht immer durch. Diese Drucke sind weiterhin mit Name und Zeiten archiviert, nur ohne Vorschaubild und Slicer-Daten. Das ist keine Slicer-Einstellung und nichts, was Sie geändert haben. Bambuddy holt die Datei in den folgenden zehn Minuten noch dreimal nach, die meisten Fälle erledigen sich also von selbst; eine weiterhin leere Karte bedeutet, dass auch jeder dieser Versuche zu lange gedauert hat. Wenn es häufiger vorkommt, erhöhen Sie Verbindungs-Timeout unter Einstellungen > Netzwerk > FTP-Wiederholung.`,dismissLabel:`Hinweis schließen`},searchPlaceholder:`Archiv durchsuchen...`,filterByPrinter:`Nach Drucker filtern`,filterByStatus:`Nach Status filtern`,sortBy:`Sortieren nach`,sortNewest:`Neueste zuerst`,sortOldest:`Älteste zuerst`,sortName:`Name`,sortDuration:`Dauer`,sortLargest:`Größte zuerst`,sortSmallest:`Kleinste zuerst`,sortSize:`Größe`,noArchives:`Keine Archive gefunden`,noArchivesSearch:`Keine Archive entsprechen Ihrer Suche`,originalPrintNotVisible:`Ursprünglicher Druck nicht sichtbar - versuchen Sie, die Filter zu löschen`,noArchivesYet:`Noch keine Archive`,prints:`Drucke`,pagination:{showing:`Zeige`,to:`bis`,of:`von`,show:`Zeige`,page:`Seite`,all:`Alle`},loadingArchives:`Lade Archive...`,releaseToUpload:`Loslassen zum Hochladen`,showAll:`Alle anzeigen`,showFavoritesOnly:`Nur Favoriten anzeigen`,gridView:`Rasteransicht`,listView:`Listenansicht`,calendarView:`Kalenderansicht`,logView:`Druckprotokoll`,manageTags:`Tags verwalten`,showFailedPrints:`Fehlgeschlagene Drucke anzeigen`,hideFailedPrints:`Fehlgeschlagene Drucke ausblenden`,hideDuplicates:`Duplikate ausblenden`,viewOriginalPrint:`Klicken, um den ursprünglichen Druck anzuzeigen (#{{id}})`,printTime:`Druckzeit`,filamentUsed:`Verbrauchtes Filament`,cost:`Kosten`,preview:`Vorschau`,deleteArchive:`Archiv löschen`,deleteConfirm:`Möchten Sie dieses Archiv wirklich löschen?`,favorite:`Favorit`,unfavorite:`Aus Favoriten entfernen`,viewDetails:`Details anzeigen`,status:{completed:`Abgeschlossen`,failed:`Fehlgeschlagen`,stopped:`Gestoppt`},toast:{source3mfAttached:`Quell-3MF angehängt: {{filename}}`,failedUploadSource3mf:`Fehler beim Hochladen der Quell-3MF`,source3mfRemoved:`Quell-3MF entfernt`,failedRemoveSource3mf:`Fehler beim Entfernen der Quell-3MF`,f3dAttached:`F3D angehängt: {{filename}}`,failedUploadF3d:`Fehler beim Hochladen der F3D`,f3dRemoved:`F3D entfernt`,failedRemoveF3d:`Fehler beim Entfernen der F3D`,timelapseAttached:`Zeitraffer angehängt: {{filename}}`,timelapseAlreadyAttached:`Zeitraffer bereits angehängt`,noMatchingTimelapse:`Kein passender Zeitraffer gefunden`,failedScanTimelapse:`Fehler beim Suchen nach Zeitraffer`,failedAttachTimelapse:`Fehler beim Anhängen des Zeitraffers`,timelapseRemoved:`Zeitraffer entfernt`,failedRemoveTimelapse:`Fehler beim Entfernen des Zeitraffers`,timelapseUploaded:`Zeitraffer hochgeladen: {{filename}}`,failedUploadTimelapse:`Fehler beim Hochladen des Zeitraffers`,archiveDeleted:`Archiv gelöscht`,failedDeleteArchive:`Fehler beim Löschen des Archivs`,addedToFavorites:`Zu Favoriten hinzugefügt`,removedFromFavorites:`Aus Favoriten entfernt`,projectUpdated:`Projekt aktualisiert`,failedUpdateProject:`Fehler beim Aktualisieren des Projekts`,linkCopied:`Link in die Zwischenablage kopiert`,failedCopyLink:`Fehler beim Kopieren des Links`,photoDeleted:`Foto gelöscht`,failedDeletePhoto:`Fehler beim Löschen des Fotos`,failedDeleteArchives:`Fehler beim Löschen der Archive`,failedUpdateFavorites:`Fehler beim Aktualisieren der Favoriten`,exportDownloaded:`Export heruntergeladen`,exportFailed:`Export fehlgeschlagen`},menu:{print:`Drucken`,openInBambuStudio:`Im Slicer öffnen`,slice:`Slicen`,externalLink:`Externer Link`,viewOnMakerWorld:`Auf MakerWorld ansehen`,preview3d:`3D-Vorschau`,viewTimelapse:`Zeitraffer ansehen`,scanForTimelapse:`Nach Zeitraffer suchen`,uploadTimelapse:`Zeitraffer hochladen`,removeTimelapse:`Zeitraffer entfernen`,downloadSource3mf:`Quell-3MF herunterladen`,uploadSource3mf:`Quell-3MF hochladen`,replaceSource3mf:`Quell-3MF ersetzen`,removeSource3mf:`Quell-3MF entfernen`,uploadF3d:`F3D hochladen`,replaceF3d:`F3D ersetzen`,downloadF3d:`F3D herunterladen`,removeF3d:`F3D entfernen`,download:`Herunterladen`,copyDownloadLink:`Download-Link kopieren`,qrCode:`QR-Code`,viewPhotos:`Fotos ansehen`,viewPhotosCount:`Fotos ansehen ({{count}})`,projectPage:`Projektseite`,addToFavorites:`Zu Favoriten hinzufügen`,removeFromFavorites:`Aus Favoriten entfernen`,edit:`Bearbeiten`,printLog:`Druckprotokoll`,goToProject:`Zum Projekt: {{name}}`,addToProject:`Zu Projekt hinzufügen`,removeFromProject:`Aus Projekt entfernen`,loading:`Laden...`,noProjectsAvailable:`Keine Projekte verfügbar`,searchProjects:`Projekte suchen…`,select:`Auswählen`,deselect:`Abwählen`,delete:`Löschen`},permission:{noReprint:`Sie haben keine Berechtigung, dieses Archiv erneut zu drucken`,noAddToQueue:`Sie haben keine Berechtigung, zur Warteschlange hinzuzufügen`,noUpdateArchives:`Sie haben keine Berechtigung, Archive zu aktualisieren`,noUploadFiles:`Sie haben keine Berechtigung, Dateien hochzuladen`,noDownload:`Sie haben keine Berechtigung, Archive herunterzuladen`,noCopyLink:`Sie haben keine Berechtigung, Download-Links zu kopieren`,noDelete:`Sie haben keine Berechtigung, dieses Archiv zu löschen`,noEdit:`Sie haben keine Berechtigung, diesen Eintrag zu bearbeiten`,noCreate:`Sie haben keine Berechtigung, Archive zu erstellen`},platePicker:{title:`Platte zur Vorschau auswählen`,hint:`Dieses Archiv enthält mehrere Platten. Wähle eine, um sie im GCode-Viewer zu öffnen.`,plateLabel:`Platte {{index}}`,objectCount:`{{count}} Objekt`,objectCount_plural:`{{count}} Objekte`,noGcode:`Dieses Archiv enthält keinen geschnittenen G-Code zur Vorschau. Öffne es zuerst in Bambu Studio zum Slicen.`},card:{previousPlate:`Vorherige Platte`,nextPlate:`Nächste Platte`,plateNumber:`Platte {{index}}`,moreOptions:`Rechtsklick für mehr Optionen`,addToFavorites:`Zu Favoriten hinzufügen`,removeFromFavorites:`Aus Favoriten entfernen`,cancelled:`abgebrochen`,failed:`fehlgeschlagen`,duplicate:`Duplikat`,duplicateTitle:`Dieses Modell wurde bereits zuvor gedruckt`,openSource3mf:`Quell-3MF in Bambu Studio öffnen (Rechtsklick für mehr Optionen)`,downloadF3d:`Fusion 360 Designdatei herunterladen`,viewTimelapse:`Zeitraffer ansehen`,viewPhoto:`1 Foto ansehen`,viewPhotos:`{{count}} Fotos ansehen`,openFolder:`Ordner öffnen: {{name}}`,slicedFile:`Geslicte Datei - druckbereit`,sourceFile:`Nur Quelldatei - keine AMS-Zuordnung verfügbar`,gcode:`GCODE`,source:`QUELLE`,project:`Projekt: {{name}}`,runsBadge:`{{count}} Drucke`,runsBadgeTitle:`Insgesamt {{count}} Drucke — {{successful}} erfolgreich, {{failed}} fehlgeschlagen. Klicken, um das vollständige Druckprotokoll zu öffnen.`,estimated:`Geschätzt: {{time}}`,actual:`Tatsächlich: {{time}}`,accuracy:`Genauigkeit: {{percent}}%`,filament:`{{weight}} g`,layer:`{{count}} Schicht`,layers:`{{count}} Schichten`,object:`{{count}} Objekt`,objects:`{{count}} Objekte`,slicedFor:`Geslict für {{model}}`,uploadedBy:`Hochgeladen von`,noPermissionReprint:`Sie haben keine Berechtigung, erneut zu drucken`,noFileForReprint:`Keine 3MF-Datei verfügbar — die Datei konnte beim Aufzeichnen des Drucks nicht vom Drucker heruntergeladen werden`,slicerAmsMapping:`AMS-Zuordnung gespeichert ({{printer}})`,slicerAmsMappingTooltip:`Die AMS-Steckplatzwahl des Slicers wurde für {{printer}} gespeichert. Steckplatznummern gelten nur für diesen Drucker, daher wird sie bei einem erneuten Druck nur wiederverwendet, wenn er wieder an {{printer}} geht.`,noPermissionEdit:`Sie haben keine Berechtigung, Archive zu bearbeiten`,noPermissionDelete:`Sie haben keine Berechtigung, Archive zu löschen`,openInBambuStudio:`Im Slicer öffnen`,openInBambuStudioToSlice:`Im Slicer öffnen zum Slicen`,slice:`Slicen`,externalLink:`Externer Link`,makerWorld:`MakerWorld – {{designer}}`,viewProject:`Projekt ansehen`,noExternalLink:`Kein externer Link`,preview3d:`3D-Vorschau`,download:`Herunterladen`,edit:`Bearbeiten`,delete:`Löschen`},runLog:{title:`Druckprotokoll`,modalTitle:`Druckprotokoll — {{name}}`,modalTitleFallback:`dieses Archiv`,empty:`Für dieses Archiv wurden noch keine Druckereignisse aufgezeichnet.`,col:{date:`Datum`,status:`Status`,duration:`Dauer`,filament:`Filament`,cost:`Kosten`},status:{completed:`Abgeschlossen`,failed:`Fehlgeschlagen`,cancelled:`Abgebrochen`,stopped:`Gestoppt`,skipped:`Übersprungen`,printing:`Druckt`}},modal:{deleteArchive:`Archiv löschen`,deleteConfirm:`Möchten Sie "{{name}}" wirklich löschen? Diese Aktion kann nicht rückgängig gemacht werden.`,deleteButton:`Löschen`,deletePurgeStats:`Diesen Druck auch aus den Quick Stats entfernen (Filament, Zeit, Kosten, Energie)`,deleteQueueItemsWarning:`{{count}} mit diesem Archiv verknüpfte Warteschlangeneinträge werden ebenfalls entfernt.`,deleteBlockedByPrinting:`Löschen nicht möglich — {{count}} Warteschlangeneinträge werden derzeit gedruckt. Druck zuerst stoppen und erneut versuchen.`,removeSource3mf:`Quell-3MF entfernen`,removeSource3mfConfirm:`Möchten Sie die Quell-3MF-Datei wirklich von "{{name}}" entfernen? Die ursprüngliche Slicer-Projektdatei wird gelöscht.`,removeButton:`Entfernen`,removeF3d:`F3D entfernen`,removeF3dConfirm:`Möchten Sie die Fusion 360 Designdatei wirklich von "{{name}}" entfernen?`,removeTimelapse:`Zeitraffer entfernen`,removeTimelapseConfirm:`Möchten Sie das Zeitraffervideo wirklich von "{{name}}" entfernen?`,timelapse:`{{name}} - Zeitraffer`,selectTimelapse:`Zeitraffer auswählen`,selectTimelapseDesc:`Keine automatische Übereinstimmung gefunden. Wählen Sie den Zeitraffer für diesen Druck:`,deleteArchives:`Archive löschen`,deleteArchivesConfirm:`Möchten Sie wirklich {{count}} Archiv(e) löschen? Diese Aktion kann nicht rückgängig gemacht werden.`,deleteCount:`{{count}} löschen`},page:{title:`Archive`,printsCount:`{{filtered}} von {{total}} Drucken`,dropFilesHere:`.3mf-Dateien hier ablegen`,releaseToUpload:`Loslassen zum Hochladen`,only3mfSupported:`Nur .3mf-Dateien werden unterstützt`,close:`Schließen`,selected:`{{count}} ausgewählt`,selectAll:`Alle auswählen`,tags:`Tags`,project:`Projekt`,favorite:`Favorit`,delete:`Löschen`,toggledFavorites:`Favoriten für {{count}} Archiv(e) umgeschaltet`,failedUpdateFavorites:`Fehler beim Aktualisieren der Favoriten`,archivesDeleted:`{{count}} Archiv(e) gelöscht`,failedDeleteArchives:`Fehler beim Löschen der Archive`,photoDeleted:`Foto gelöscht`,failedDeletePhoto:`Fehler beim Löschen des Fotos`},list:{name:`Name`,printer:`Drucker`,date:`Datum`,size:`Größe`,actions:`Aktionen`,hasTimelapse:`Hat Zeitraffer`},log:{date:`Datum`,printName:`Druckname`,printer:`Drucker`,user:`Benutzer`,status:`Status`,duration:`Dauer`,filament:`Filament`,filamentUsed:`Filamentverbrauch`,cost:`Kosten`,energy:`Energie`,energyCost:`Energiekosten`,completedAt:`Beendet`,columns:`Spalten`,sortBy:`Nach {{column}} sortieren`,allPrinters:`Alle Drucker`,allUsers:`Alle Benutzer`,allStatuses:`Alle Status`,cancelled:`Abgebrochen`,skipped:`Übersprungen`,dateFrom:`Von`,dateTo:`Bis`,noEntries:`Keine Druckprotokolleinträge gefunden`,showing:`{{count}} von {{total}} Einträgen`,rowsPerPage:`Zeilen`,page:`Seite`,prev:`Zurück`,next:`Weiter`,clearLog:`Protokoll löschen`,clearLogTitle:`Druckprotokoll löschen`,clearLogConfirm:`Alle Druckprotokolleinträge werden dauerhaft gelöscht. Archive und Warteschlangeneinträge sind nicht betroffen. Diese Aktion kann nicht rückgängig gemacht werden. Sind Sie sicher?`,clearLogButton:`Alle löschen`,cleared:`{{count}} Protokolleinträge gelöscht`,clearFailed:`Druckprotokoll konnte nicht gelöscht werden`,deleteEntryTitle:`Druckprotokoll-Eintrag löschen`,deleteEntryConfirm:`Dieser Eintrag wird aus dem Protokoll entfernt und sein Filament-, Zeit- und Kostenbeitrag verschwindet aus den Schnellstatistiken. Das zugehörige Archiv (falls vorhanden) ist nicht betroffen. Diese Aktion kann nicht rückgängig gemacht werden.`,entryDeleted:`Druckprotokoll-Eintrag gelöscht`,entryDeleteFailed:`Druckprotokoll-Eintrag konnte nicht gelöscht werden`,editEntryTitle:`Druckprotokoll-Eintrag bearbeiten`,editEntryDescription:`Diesen Druckdurchlauf klassifizieren. Das Fehleranalyse-Widget gruppiert nach diesen Werten, sodass Aktualisierungen sofort in die Statistik einfließen.`,entryUpdated:`Druckprotokoll-Eintrag aktualisiert`,entryUpdateFailed:`Druckprotokoll-Eintrag konnte nicht aktualisiert werden`,statuses:{completed:`Abgeschlossen`,failed:`Fehlgeschlagen`,stopped:`Gestoppt`,cancelled:`Abgebrochen`,skipped:`Übersprungen`}}},dispatchToast:{untitled:`Druckjob`,startingPrints:`Drucke starten`,progressSummary:`{{complete}}/{{total}} fertig • Verarbeitung: {{processing}}`,expandDetails:`Versanddetails ausklappen`,collapseDetails:`Versanddetails einklappen`,awaitingPrinter:`Warte auf Drucker…`,status:{processing:`Verarbeitung`,completed:`Fertig`,failed:`Fehlgeschlagen`},failed:{generic:`Versand fehlgeschlagen`,upload_failed:`Upload zum Drucker fehlgeschlagen`,start_command_failed:`Drucker hat Startbefehl abgelehnt`},dismiss:`Schließen`},pipelineRuns:{title:`Pipeline-Läufe`,loading:`Wird geladen…`,empty:`Noch keine Pipeline-Läufe.`,filter:{pipeline:`Pipeline`,status:`Status`,target:`Ziel`,all:`Alle`,allPipelines:`Alle Pipelines`,allStatus:`Alle Status`,allTargets:`Alle Ziele`,clear:`Filter zurücksetzen`,noMatches:`Keine Läufe entsprechen den aktuellen Filtern.`},totalCount_one:`{{n}} Lauf`,totalCount_other:`{{n}} Läufe`,copies:`{{n}} Kopien`,failedCount:`{{n}} fehlgeschlagen`,copyN:`Kopie {{n}}`,retryFailed:`Fehlgeschlagene wiederholen`,retryOf:`Wiederholung von #{{n}}`,pagination:`{{start}}–{{end}} von {{total}}`,toast:{cancelled:`Lauf abgebrochen`,cancelFailed:`Abbruch fehlgeschlagen`,retryStarted:`Wiederholung gestartet`,retryFailed:`Wiederholung fehlgeschlagen`,cleared:`{{n}} Läufe gelöscht`,clearFailed:`Löschen fehlgeschlagen`},clearLog:`Verlauf löschen`,clearConfirmTitle:`Verlauf löschen?`,clearConfirmBody:`Jeden abgeschlossenen, fehlgeschlagenen, abgebrochenen und teilweise fehlgeschlagenen Pipeline-Lauf löschen? Laufende Läufe bleiben erhalten. Dies kann nicht rückgängig gemacht werden.`,clearConfirmAction:`Löschen`,jobStatus:{pending:`ausstehend`,awaiting_printer:`wartet auf Drucker`,queued:`in Warteschlange`,printing:`druckt`,completed:`abgeschlossen`,failed:`fehlgeschlagen`,cancelled:`abgebrochen`},cancelledByUser:`Vom Benutzer abgebrochen`},queue:{filamentShort:{rowBadge:`Filament fuer die zugewiesene Spule reicht nicht`,rowTooltip:`Der Dispatcher hat diese Position markiert. Klicke auf Play, um den Pro-Slot-Fehlbestand zu sehen und zu entscheiden, ob trotzdem gedruckt werden soll.`,confirmTitle:`Filament reicht nicht`,confirmIntro:`Die zugewiesene Spule kann mindestens einen Slot nicht versorgen. Trotzdem drucken?`,lineItem:`Slot {{slot}}: benoetigt {{required}} g, {{remaining}} g verbleibend`,unknown:`unbekannt`,printAnyway:`Trotzdem drucken`},slicerAmsMapping:{rowBadge:`AMS-Steckplätze für diesen Drucker gespeichert`,rowTooltip:`Dieses Archiv enthält die genauen AMS-Steckplätze, die der Slicer ausgewählt hat, gespeichert für den Drucker dieses Eintrags. Ein erneuter Druck darauf kann diese Fächer wiederverwenden, statt erneut nach Typ und Farbe zuzuordnen.`},title:`Druckwarteschlange`,subtitle:`Planen und verwalten Sie Ihre Druckaufträge`,editQueueItem:`Warteschlangeneintrag bearbeiten`,selectAllPlates:`Alle {{count}} Platten auswählen`,deselectAll:`Alle abwählen`,printQueued:`Druck in Warteschlange`,printQueuedWillStartWhenIdle:`Startet, sobald der Drucker im Leerlauf ist`,itemsQueued:`{{count}} Einträge in Warteschlange`,sending:`Wird gesendet...`,sendingProgress:`Sende {{current}}/{{total}}...`,adding:`Wird hinzugefügt...`,addingProgress:`Füge hinzu {{current}}/{{total}}...`,savingProgress:`Speichere {{current}}/{{total}}...`,clearQueue:`Warteschlange leeren`,clearHistory:`Verlauf löschen`,emptyQueue:`Warteschlange ist leer`,position:`Position`,scheduledTime:`Geplante Zeit`,moveUp:`Nach oben`,moveDown:`Nach unten`,startNow:`Jetzt starten`,printingInProgress:`Druck läuft...`,viewArchive:`Archiv anzeigen`,viewInFileManager:`Im Dateimanager anzeigen`,itemCount:`{{count}} Element`,itemCount_plural:`{{count}} Elemente`,dragToReorder:`Ziehen zum Neuordnen (nur Sofort)`,reorderHint:`Position betrifft nur Sofort-Elemente. Geplante Elemente werden zur festgelegten Zeit ausgeführt.`,sjf:{label:`SJF`,tooltip:`Kürzester Auftrag zuerst — Scheduler bevorzugt kürzere Drucke`},addedBy:`Hinzugefügt von {{name}}`,nextInQueue:`Nächster in der Warteschlange`,clearPlateSuccess:`Druckplatte freigegeben — bereit für nächsten Druck`,plateNumber:`Platte {{index}}`,quantity:`Menge`,quantityHint:`Erstellt {{count}} Warteschlangeneinträge`,plateQuantityLabel:`Durchläufe von {{plate}}`,plateQuantityTotal_one:`{{count}} Durchlauf insgesamt`,plateQuantityTotal_other:`{{count}} Durchläufe insgesamt`,batchOrders:{title:`Stapelaufträge`,emptyTitle:`Keine Stapelaufträge`,emptyDescription:`Stelle eine Datei mit mehreren Druckplatten oder mehrere Kopien einer Platte in die Warteschlange — der Auftrag erscheint hier mit seinem Fortschritt.`,filter:{active:`Aktiv`,completed:`Abgeschlossen`,cancelled:`Abgebrochen`,all:`Alle`},status:{active:`Aktiv`,completed:`Abgeschlossen`,cancelled:`Abgebrochen`},noTargets:`Nur Gruppierung`,noTargetsHint:`Vor der Einführung von Zielmengen pro Platte erstellt; verfolgt daher die eingereihten Durchläufe statt einer Zielmenge.`,dispatchRemaining:`{{count}} verbleibende einreihen`,dispatchPlate:`Rest einreihen`,strandedPlate:`Keine Vorlage mehr zum Kopieren`,strandedNotice:`Von den {{owed}} noch offenen Durchläufen lassen sich {{runs}} nicht einreihen: Für diese Platte gibt es keinen eingereihten oder abgeschlossenen Durchlauf mehr, von dem sich die Einstellungen kopieren lassen. Reihe die Platte einmal aus der Datei ein oder brich den Auftrag ab.`,dispatched:`Verbleibende Durchläufe für {{name}} eingereiht`,plateProgress:`{{completed}} von {{target}} fertig`,remaining:`{{count}} noch offen`,failed:`{{count}} fehlgeschlagen`,printing:`{{count}} im Druck`,wholeFile:`Gesamte Datei`,due:`Fällig {{date}}`,costSoFar:`{{amount}} bisher`,costRemaining:`({{amount}} verbleibend)`},activeBatches:`Aktive Stapel`,batchProgress:`{{completed}} von {{total}} abgeschlossen`,cancelBatch:`Verbleibende abbrechen`,batchCancelled:`Verbleibende Stapeleinträge abgebrochen`,cancelBatchConfirmTitle:`Stapel abbrechen`,cancelBatchConfirmMessage:`Diesen Auftrag schließen? Noch eingereihte Durchläufe werden abgebrochen, und er fordert nicht länger, was er nicht produziert hat.`,batch:{defaultName:`Stapel`,label:`{{count}} Eintrag`,label_plural:`{{count}} Einträge`,pendingCount:`{{count}} ausstehend`,pendingCount_plural:`{{count}} ausstehend`,expand:`Stapel ausklappen`,collapse:`Stapel einklappen`,groupAsBatch:`Als Stapel gruppieren…`,groupAsBatchDescription:`Fasse die {{count}} ausgewählten Einträge zu einem einklappbaren Stapel zusammen.`,nameLabel:`Stapelname`,namePlaceholder:`z. B. Freitagsgeschenke`,create:`Stapel erstellen`,ungroup:`Gruppierung aufheben`,ungroupConfirmTitle:`Stapel auflösen?`,ungroupConfirmMessage:`Die Einträge bleiben in der Warteschlange, sind aber nicht mehr gruppiert.`,dragGroup:`Gruppe ziehen`},tabs:{batches:`Stapel`,queue:`Warteschlange`,history:`Verlauf`,timeline:`Zeitachse`,pipelines:`Druckabläufe`},layout:{flatList:`Liste`,byPrinter:`Nach Drucker`,groupByPrinter:`Nach Drucker gruppieren`},history:{emptyTitle:`Noch kein Verlauf`,emptyDescription:`Abgeschlossene, abgebrochene und fehlgeschlagene Drucke erscheinen hier.`,showMore:`Mehr anzeigen`,showingCount:`{{shown}} von {{total}} werden angezeigt`},dragGhost:{multiCount:`{{count}} Einträge`,batch:`{{name}} ({{count}} Kopie)`,batch_plural:`{{name}} ({{count}} Kopien)`},sections:{currentlyPrinting:`Aktuell druckend`,queued:`In Warteschlange`,history:`Verlauf`},status:{pending:`Ausstehend`,waiting:`Wartend`,printing:`Druckt`,paused:`Pausiert`,completed:`Abgeschlossen`,failed:`Fehlgeschlagen`,skipped:`Übersprungen`,cancelled:`Abgebrochen`},summary:{printing:`Druckt`,queued:`In Warteschlange`,totalTime:`Gesamte Wartezeit`,totalWeight:`Gesamtgewicht der Warteschlange`,history:`Verlauf`},filter:{allPrinters:`Alle Drucker`,unassigned:`Nicht zugewiesen`,allStatus:`Alle Status`,allLocations:`Alle Standorte`,any:`Beliebig`},sort:{byPosition:`Nach Position sortieren`,byName:`Nach Name sortieren`,byPrinter:`Nach Drucker sortieren`,bySchedule:`Nach Zeitplan sortieren`,byDate:`Nach Datum sortieren`,ascendingOldest:`Aufsteigend (älteste zuerst)`,descendingNewest:`Absteigend (neueste zuerst)`},badges:{staged:`Bereitgestellt`,requiresPrevious:`Erfordert vorherigen Erfolg`,autoPowerOff:`Automatisch ausschalten`,gcodeInjection:`G-Code`},empty:{title:`Keine Drucke geplant`,description:`Planen Sie einen Druck von der Archivseite über die Option "Planen" im Kontextmenü oder ziehen Sie Dateien hierher.`},time:{etaIfStartedNow:`Fertigstellungszeit, wenn dieser Auftrag jetzt starten würde`,whenFree:`Sobald ein Drucker frei ist`,overdue:`Überfällig`,now:`Jetzt`,lessThanMinute:`In weniger als einer Minute`,inMinutes:`In {{count}} Min`,inHours:`In {{count}} Stunden`},actions:{startPrint:`Druck starten`,stopPrint:`Druck stoppen`,requeue:`Erneut einreihen`},bulkEdit:{title:`{{count}} Element bearbeiten`,title_plural:`{{count}} Elemente bearbeiten`,description:`Nur geänderte Einstellungen werden auf ausgewählte Elemente angewendet.`,printer:`Drucker`,noChange:`— Keine Änderung —`,queueOptions:`Warteschlangenoptionen`,staged:`Bereitgestellt (manueller Start)`,autoPowerOff:`Nach Druck automatisch ausschalten`,requirePrevious:`Vorherigen Erfolg erfordern`,gcodeInjection:`G-Code einfügen`,printOptions:`Druckoptionen`,bedLevelling:`Bett-Nivellierung`,flowCalibration:`Fluss-Kalibrierung`,vibrationCalibration:`Vibrations-Kalibrierung`,layerInspection:`Erste-Schicht-Prüfung`,timelapse:`Zeitraffer`,useAms:`AMS verwenden`,nozzleOffsetCali:`Düsenversatz-Kalibrierung`,applyChanges:`Änderungen übernehmen`,selectAll:`Alle auswählen`,deselectAll:`Auswahl aufheben`,selected:`{{count}} ausgewählt`,editSelected:`Ausgewählte bearbeiten`,cancelSelected:`Ausgewählte abbrechen`},confirm:{cancelTitle:`Geplanten Druck abbrechen`,cancelMessage:`Möchten Sie "{{name}}" wirklich abbrechen?`,stopTitle:`Druck stoppen`,stopMessage:`Möchten Sie den aktuellen Druck "{{name}}" wirklich stoppen? Der Druckauftrag wird am Drucker abgebrochen.`,removeTitle:`Aus Verlauf entfernen`,removeMessage:`Möchten Sie "{{name}}" wirklich aus dem Warteschlangenverlauf entfernen?`,clearHistoryTitle:`Verlauf löschen`,clearHistoryMessage:`Möchten Sie alle {{count}} Element(e) aus dem Verlauf entfernen?`,cancelButton:`Druck abbrechen`,stopButton:`Druck stoppen`,thisPrint:`diesen Druck`,thisItem:`dieses Element`},toast:{cancelled:`Warteschlangenelement abgebrochen`,cancelFailed:`Element konnte nicht abgebrochen werden`,removed:`Warteschlangenelement entfernt`,keptForOrder:`Abgebrochen statt entfernt: Nur aus diesem Durchlauf kann der Stapelauftrag diese Platte erneut einreihen`,historyKeptForOrders:`{{kept}} behalten, die Stapelaufträge noch brauchen.`,removeFailed:`Element konnte nicht entfernt werden`,stopped:`Druck gestoppt`,stopFailed:`Druck konnte nicht gestoppt werden`,released:`Druck in Warteschlange freigegeben`,startFailed:`Druck konnte nicht gestartet werden`,reorderFailed:`Warteschlange konnte nicht neu geordnet werden`,historyCleared:`{{count}} Verlaufselement(e) gelöscht`,clearHistoryFailed:`Verlauf konnte nicht gelöscht werden`,updateFailed:`Elemente konnten nicht aktualisiert werden`,bulkCancelled:`{{count}} Element(e) abgebrochen`,bulkCancelFailed:`Elemente konnten nicht abgebrochen werden`,batchCreated:`Stapel „{{name}}“ erstellt`,batchCreateFailed:`Stapel konnte nicht erstellt werden`,batchUngrouped:`{{count}} Eintrag/Einträge aus Stapel gelöst`,batchUngroupFailed:`Stapel konnte nicht aufgelöst werden`,resumedAfterFailure:`Warteschlange fortgesetzt — {{restored}} Auftrag/Aufträge wieder eingereiht`,resumeAfterFailureFailed:`Warteschlange konnte nicht fortgesetzt werden`},resumeAfterFailure:{banner:`{{printer}} ist durch einen vorherigen Druckfehler blockiert — {{count}} Auftrag/Aufträge übersprungen`,bannerHint:`Behebe das Druckerproblem und setze die Warteschlange dann fort, um die übersprungenen Aufträge wiederherzustellen und die Sperre aufzuheben.`,button:`Nach Fehler fortsetzen`,confirmTitle:`Warteschlange nach Fehler fortsetzen?`,confirmMessage:`Setze {{count}} übersprungenen Auftrag/Aufträge auf {{printer}} wieder auf „Ausstehend“ und hebe die Vorgängersperre auf. Stelle vorher sicher, dass der Drucker bereit ist.`},timeline:{listView:`Liste`,timelineView:`Zeitstrahl`,unassigned:`Nicht zugewiesen`,noData:`Keine geplanten Drucke für diesen Tag`,nothingCommitted:`Keine festgelegten Pläne in diesem Zeitfenster. Vorgemerkte Einträge, wartende Einträge und ASAP-Aufträge auf inaktiven Druckern werden nicht angezeigt — leg eine geplante Zeit fest oder gib einen vorgemerkten Eintrag frei, damit er hier erscheint.`,allDoneBy:`Alle Drucke voraussichtlich fertig um {{time}}`,staged:`Bereitgestellt`,filterAll:`Alle anzeigen`,filterPrinting:`Druckend`,filterQueued:`Warteschlange`,time:{anyMoment:`jeden Moment`,minutesLeft:`{{minutes}}m übrig`,hoursLeft:`{{hours}}h übrig`,hoursMinutesLeft:`{{hours}}h {{minutes}}m übrig`},day:{previous:`Vorheriger Tag`,next:`Nächster Tag`,today:`Heute`},window:{back12h:`12 Stunden zurück`,forward12h:`12 Stunden vor`,now:`Jetzt`},printerColumnHeader:`Drucker`},permissions:{noStopPrint:`Sie haben keine Berechtigung, Drucke zu stoppen`,noStartPrint:`Sie haben keine Berechtigung, Drucke zu starten`,noEdit:`Sie haben keine Berechtigung, dieses Warteschlangenelement zu bearbeiten`,noCancel:`Sie haben keine Berechtigung, dieses Warteschlangenelement abzubrechen`,noRequeue:`Sie haben keine Berechtigung, Elemente erneut einzureihen`,noRemove:`Sie haben keine Berechtigung, dieses Warteschlangenelement zu entfernen`,noClearHistory:`Sie haben keine Berechtigung, den gesamten Verlauf zu löschen`,noEditItems:`Sie haben keine Berechtigung, Warteschlangenelemente zu bearbeiten`,noCancelItems:`Sie haben keine Berechtigung, Warteschlangenelemente abzubrechen`}},stats:{title:`Statistiken`,subtitle:`Widgets zum Neuanordnen ziehen. Auf das Augensymbol klicken zum Ausblenden.`,overview:`Übersicht`,totalPrints:`Gesamtdrucke`,successRate:`Erfolgsrate`,totalPrintTime:`Gesamtdruckzeit`,printTime:`Druckzeit`,totalFilament:`Gesamtverbrauch Filament`,filamentUsed:`Filamentverbrauch`,filamentCost:`Filamentkosten`,totalCost:`Gesamtkosten`,energyUsed:`Energieverbrauch`,energyCost:`Energiekosten`,energyWarmingUpTooltip:`Die Energieerfassung sammelt noch stündliche Snapshots. Zeitraumwerte werden genau, sobald vor dem gewählten Bereich mindestens ein Snapshot vorliegt. Frühe Werte können zu niedrig sein.`,averagePrintTime:`Durchschnittliche Druckzeit`,printsPerDay:`Drucke pro Tag`,byPrinter:`Nach Drucker`,printsByPrinter:`Drucke nach Drucker`,byMaterial:`Nach Material`,byMonth:`Nach Monat`,last7Days:`Letzte 7 Tage`,last30Days:`Letzte 30 Tage`,last90Days:`Letzte 90 Tage`,allTime:`Gesamt`,quickStats:`Schnellstatistiken`,printActivity:`Druckaktivität`,filamentTypes:`Filamenttypen`,filamentTrends:`Filamenttrends`,failureAnalysis:`Fehleranalyse`,timeAccuracy:`Zeitgenauigkeit`,successful:`Erfolgreich:`,failed:`Fehlgeschlagen:`,cancelled:`Abgebrochen:`,perfectEstimate:`100% = perfekte Schätzung`,noTimeAccuracyData:`Noch keine Zeitgenauigkeitsdaten`,noFilamentData:`Keine Filamentdaten verfügbar`,noPrinterData:`Keine Druckerdaten verfügbar`,noPrintData:`Keine Druckdaten verfügbar`,noPrintDataLast30Days:`Keine Druckdaten in den letzten 30 Tagen`,failureReasons:`Fehlerursachen`,topFailureReasons:`Häufigste Fehlerursachen`,failedPrintsCount:`{{failed}} / {{total}} Drucke fehlgeschlagen`,lastWeekRate:`Letzte Woche: {{rate}}%`,resetLayout:`Layout zurücksetzen`,recalculateCosts:`Kosten neu berechnen`,recalculateCostsHint:`Alle Archivkosten mit aktuellen Filamentpreisen neu berechnen`,exportStats:`Statistiken exportieren`,exportAsCsv:`Als CSV exportieren`,exportAsExcel:`Als Excel exportieren`,hiddenCount:`{{count}} ausgeblendet`,exportDownloaded:`Export heruntergeladen`,exportFailed:`Export fehlgeschlagen`,layoutReset:`Layout zurückgesetzt`,recalculatedCosts:`Kosten für {{count}} Archive neu berechnet`,recalculateFailed:`Kosten konnten nicht neu berechnet werden`,loadingStats:`Statistiken werden geladen...`,noPermissionResetLayout:`Sie haben keine Berechtigung, das Layout zurückzusetzen`,noPermissionRecalculate:`Sie haben keine Berechtigung, Kosten neu zu berechnen`,noPrintDataInRange:`Keine Druckdaten im ausgewählten Zeitraum`,periodFilament:`Filamentverbrauch`,periodCost:`Kosten`,avgPerPrint:`Durchschnitt pro Druck`,usageOverTime:`Verbrauch im Zeitverlauf`,energyOverTime:`Energie im Zeitverlauf`,filamentByWeight:`Gewicht`,printDuration:`Druckdauer`,printerUtilization:`Druckerauslastung`,filamentSuccess:`Erfolg nach Material`,printHabits:`Druckgewohnheiten`,printTimeOfDay:`Druck-Tageszeit`,colorDistribution:`Farbverteilung`,noColorData:`Keine Farbdaten verfügbar`,records:`Rekorde`,longestPrint:`Längster Druck`,heaviestPrint:`Schwerster Druck`,mostExpensivePrint:`Teuerster Druck`,busiestDay:`Aktivster Tag`,successStreak:`Erfolgsserie`,streakPrint:`aufeinanderfolgender Druck`,streakPrints:`{{count}} aufeinanderfolgende Drucke`,printerStats:`Druckerstatistiken`,hours:`Stunden`,avgPrints:`Ø Drucke`,noArchiveData:`Keine Druckdaten verfügbar`,filamentByTime:`Zeitverlauf`,avgWeight:`Ø Gewicht`,avgTime:`Ø Zeit`,filamentByPrints:`Drucke`,timeframe:{today:`Heute`,"this-week":`Diese Woche`,"this-month":`Dieser Monat`,"last-7":`Letzte 7 Tage`,"last-30":`Letzte 30 Tage`,"last-90":`Letzte 90 Tage`,"this-year":`Dieses Jahr`,"all-time":`Gesamt`,custom:`Benutzerdefiniert`,from:`Von`,to:`Bis`},allUsers:`Alle Benutzer`,noUser:`Kein Benutzer (System)`,filterByUser:`Nach Benutzer filtern`},maintenance:{title:`Wartung`,overview:`Übersicht`,allOk:`Alle Wartungen aktuell`,dueCount:`{{count}} Aufgabe fällig`,dueCount_plural:`{{count}} Aufgaben fällig`,warningCount:`{{count}} Warnung`,warningCount_plural:`{{count}} Warnungen`,totalPrintTime:`Gesamtdruckzeit`,nextMaintenance:`Nächste Wartung`,nothingDue:`Nichts fällig`,tasks:`Aufgaben`,lastPerformed:`Zuletzt durchgeführt`,interval:`Intervall`,hoursRemaining:`{{hours}}h verbleibend`,hoursOverdue:`{{hours}}h überfällig`,markDone:`Als erledigt markieren`,performMaintenance:`Wartung durchführen`,history:`Verlauf`,noHistory:`Kein Wartungsverlauf`,editPrintHours:`Druckstunden bearbeiten`,currentHours:`Aktuelle Stunden`,statusTab:`Status`,settingsTab:`Einstellungen`,overdueCount:`{{count}} überfällig`,dueSoonCount:`{{count}} bald fällig`,dueSoon:`Bald fällig`,allGood:`Alles in Ordnung`,overdueBy:`Überfällig um {{duration}}`,dueIn:`Fällig in {{duration}}`,timeLeft:`{{duration}} verbleibend`,day:`1 Tag`,days:`{{count}} Tage`,week:`1 Woche`,weeks:`{{count}} Wochen`,month:`1 Monat`,months:`{{count}} Monate`,year:`1 Jahr`,maintenanceTypes:`Wartungstypen`,maintenanceTypesDescription:`Systemtypen und Ihre benutzerdefinierten Wartungsaufgaben`,addCustomType:`Benutzerdefinierten Typ hinzufügen`,restoreDefaults:`Standardaufgaben wiederherstellen`,intervalType:`Intervalltyp`,intervalValue:`Intervall ({{type}})`,icon:`Symbol`,documentationLink:`Dokumentationslink (optional)`,assignToPrinters:`Druckern zuweisen`,selectAtLeastOnePrinter:`Wählen Sie mindestens einen Drucker`,addType:`Typ hinzufügen`,custom:`Benutzerdefiniert`,printHours:`Druckstunden`,calendarDays:`Kalendertage`,exampleName:`z.B. HEPA-Filter ersetzen`,viewDocumentation:`Dokumentation anzeigen`,timeBasedInterval:`Zeitbasiertes Intervall`,intervalOverrides:`Intervall-Überschreibungen`,intervalOverridesDescription:`Intervalle für bestimmte Drucker anpassen`,assignedToPrinters:`Druckern zugewiesen:`,noPrintersAssigned:`Keine Drucker zugewiesen`,addPrinterShort:`Hinzufügen:`,printersAssignedClick:`{{count}} Drucker zugewiesen - klicken zum Verwalten`,removeFromPrinter:`Von diesem Drucker entfernen`,types:{lubricateCarbonRods:`Karbonstäbe schmieren`,lubricateRails:`Linearschienen schmieren`,cleanNozzle:`Düse/Hotend reinigen`,checkBelts:`Riemenspannung prüfen`,cleanBuildPlate:`Druckbett reinigen`,checkExtruder:`Extruderzahnräder prüfen`,checkCooling:`Kühlungslüfter prüfen`,generalInspection:`Allgemeine Inspektion`,cleanCarbonRods:`Kohlenstoffstangen reinigen`,lubricateSteelRods:`Stahlstangen schmieren`,cleanSteelRods:`Stahlstangen reinigen`,cleanLinearRails:`Linearschienen reinigen`,checkPtfeTube:`PTFE-Schlauch prüfen`,replaceHepaFilter:`HEPA-Filter ersetzen`,replaceCarbonFilter:`Aktivkohlefilter ersetzen`,lubricateLeftNozzleRail:`Linke Düsenschiene schmieren`},maintenanceComplete:`Wartung als abgeschlossen markiert`,typeUpdated:`Wartungstyp aktualisiert`,typeDeleted:`Wartungstyp gelöscht`,defaultsRestored:`{{count}} Standardaufgabe(n) wiederhergestellt`,printHoursUpdated:`Druckstunden aktualisiert`,printerAssigned:`Drucker zugewiesen`,printerRemoved:`Drucker entfernt`,deleteTypeConfirm:`"{{name}}" löschen?`,deleteSystemTypeTitle:`Standard-Wartungsaufgabe löschen?`,deleteSystemTypeMessage:`Möchten Sie die Standard-Wartungsaufgabe "{{name}}" wirklich löschen?`,noPermissionUpdate:`Sie haben keine Berechtigung, Wartungselemente zu aktualisieren`,noPermissionPerform:`Sie haben keine Berechtigung, Wartungen durchzuführen`,noPermissionEditTypes:`Sie haben keine Berechtigung, Wartungstypen zu bearbeiten`,noPermissionDeleteTypes:`Sie haben keine Berechtigung, Wartungstypen zu löschen`,noPermissionEditHours:`Sie haben keine Berechtigung, Druckstunden zu bearbeiten`,noPermissionRemovePrinter:`Sie haben keine Berechtigung, Druckerzuweisungen zu entfernen`,noPermissionAssignPrinter:`Sie haben keine Berechtigung, Drucker zuzuweisen`,noPermissionEditIntervals:`Sie haben keine Berechtigung, Intervalle zu bearbeiten`,configureSettings:`Wartungstypen und Intervalle konfigurieren`},settings:{sliceEngine:`Slice-Engine`,sliceEngineSidecar:`Server-Sidecar`,sliceEngineSidecarHint:`Das Slicing läuft auf dem Server im Slicer-Sidecar-Container.`,sliceEngineBrowser:`Im Browser`,sliceEngineBrowserHint:`Das Slicing läuft auf diesem Gerät, ohne Server.`,title:`Einstellungen`,general:`Allgemein`,tabs:{general:`Allgemein`,smartPlugs:`Smart Plugs`,sensors:`Sensoren`,notifications:`Benachrichtigungen`,queue:`Workflow`,queueDispatch:`Warteschlange & Dispatch`,queuePipelines:`Pipelines`,filament:`Filament`,network:`Netzwerk`,apiKeys:`API-Schlüssel`,virtualPrinter:`Virtueller Drucker`,spoolbuddy:`SpoolBuddy`,failureDetection:`Fehlererkennung`,users:`Authentifizierung`,backup:`Sicherung`,emailAuth:`E-Mail-Authentifizierung`,ldap:`LDAP`,twoFa:`Zwei-Faktor-Auth`,oidc:`SSO / OIDC`,security:`Sicherheit`},spoolbuddy:{infoTitle:`SpoolBuddy-Geräte`,infoBody:`SpoolBuddy-Kioske registrieren sich automatisch per Heartbeat. Ein Gerät hier abmelden, wenn es nicht mehr verwendet wird oder wenn ein veralteter Eintrag nach einem Daemon-Absturz übrig geblieben ist.`,duplicatesTitle:`{{count}} Geräte registriert`,duplicatesBody:`Die Kiosk-Oberfläche verwendet nur das zuerst registrierte Gerät. Falls eines davon ein veralteter Doppeleintrag nach einem Absturz ist, kann es hier entfernt werden — ein laufendes Gerät registriert sich beim nächsten Heartbeat automatisch neu.`,empty:`Noch keine SpoolBuddy-Geräte registriert.`,online:`Online`,offline:`Offline`,unregister:`Abmelden`,unregisterSuccess:`Gerät abgemeldet`,unregisterError:`Gerät konnte nicht abgemeldet werden`,confirmTitle:`SpoolBuddy-Gerät abmelden?`,confirmBody:`Dies entfernt „{{hostname}}" ({{deviceId}}) aus der Datenbank. Ein laufendes Gerät registriert sich beim nächsten Heartbeat automatisch neu.`,ipAddress:`IP-Adresse`,firmware:`Firmware`,lastSeen:`Zuletzt gesehen`,daemonUptime:`Daemon-Laufzeit`,systemUptime:`System-Laufzeit`,never:`nie`,nfc:`NFC`,scale:`Waage`,cpuTemp:`CPU-Temp.`,cpuLoad:`CPU-Last`,memory:`Speicher`,disk:`Festplatte`,update:`Aktualisieren`,updateConfirmTitle:`Spoolbuddy-Daemon aktualisieren?`,updateConfirmBody:`Software-Update auf „{{hostname}}" auslösen? Der Daemon startet nach dem Update neu.`,restartBrowser:`Browser neu starten`,restartBrowserConfirmTitle:`Kiosk-Browser neu starten?`,restartBrowserConfirmBody:`Kiosk-Browser auf „{{hostname}}" neu starten? Die Anzeige wird kurz schwarz.`,restartDaemon:`Daemon neu starten`,restartDaemonConfirmTitle:`Spoolbuddy-Daemon neu starten?`,restartDaemonConfirmBody:`Spoolbuddy-Daemon auf „{{hostname}}" neu starten? Das Gerät ist für einige Sekunden offline.`,reboot:`Neustart`,rebootConfirmTitle:`Gerät neu starten?`,rebootConfirmBody:`„{{hostname}}" neu starten? Das Gerät ist für etwa eine Minute offline.`,shutdown:`Herunterfahren`,shutdownConfirmTitle:`Gerät herunterfahren?`,shutdownConfirmBody:`„{{hostname}}" herunterfahren? Physischer Zugriff ist nötig, um es wieder einzuschalten.`,commandConfirm:`Bestätigen`,commandQueued:`Befehl eingereiht`,commandError:`Befehl konnte nicht gesendet werden`},ldap:{title:`LDAP-Authentifizierung`,enabledDesc:`LDAP-Authentifizierung ist aktiviert`,disabledDesc:`LDAP-Authentifizierung ist deaktiviert`,disabledHint:`LDAP-Einstellungen unten konfigurieren und speichern, dann aktivieren.`,enabled:`LDAP-Authentifizierung aktiviert`,disabled:`LDAP-Authentifizierung deaktiviert`,feature1:`Benutzer können sich mit LDAP-Anmeldedaten anmelden`,feature2:`Lokales Admin-Konto bleibt als Fallback erhalten`,feature3:`LDAP-Gruppen werden bei der Anmeldung BamBuddy-Gruppen zugeordnet`,serverConfig:`LDAP-Server-Konfiguration`,serverUrl:`Server-URL`,serverUrlHint:`Verwenden Sie ldap:// für Standard oder ldaps:// für SSL-Verbindungen`,security:`Sicherheit`,securityHint:`StartTLS aktualisiert eine einfache Verbindung auf TLS. LDAPS verwendet TLS von Anfang an.`,bindDn:`Bind-DN (Dienstkonto)`,bindPassword:`Bind-Passwort`,searchBase:`Such-Basis-DN`,userFilter:`Benutzer-Suchfilter`,userFilterHint:`{username} wird durch den Anmeldenamen ersetzt. Verwenden Sie (uid={username}) für OpenLDAP.`,advanced:`Erweitert`,autoProvision:`Benutzer automatisch anlegen`,autoProvisionHint:`Automatisch ein BamBuddy-Konto bei der ersten LDAP-Anmeldung erstellen`,defaultGroup:`Standardgruppe`,defaultGroupNone:`— Keine (kein Fallback) —`,defaultGroupHint:`Fallback-Gruppe, die zugewiesen wird, wenn sich ein LDAP-Benutzer authentifiziert, aber in keiner zugeordneten LDAP-Gruppe enthalten ist. Leer lassen, um nicht zugeordnete Benutzer ohne Berechtigungen zu belassen.`,groupMapping:`Gruppenzuordnung (JSON)`,groupMappingHint:`LDAP-Gruppen-DNs BamBuddy-Gruppen zuordnen. Verfügbare Gruppen: `,testConnection:`Verbindung testen`,settingsSaved:`LDAP-Einstellungen gespeichert`,errors:{serverRequired:`LDAP-Server-URL ist erforderlich`,searchBaseRequired:`Such-Basis-DN ist erforderlich`,enableAuthFirst:`Authentifizierung zuerst aktivieren`,configureLdapFirst:`LDAP-Einstellungen zuerst speichern`}},email:{smtpSettings:`SMTP-Konfiguration`,smtpHost:`SMTP-Server`,smtpPort:`SMTP-Port`,security:`Sicherheit`,authentication:`Authentifizierung`,username:`Benutzername`,password:`Passwort`,fromEmail:`Absender-E-Mail`,fromName:`Absendername`,testConnection:`SMTP-Verbindung testen`,testRecipient:`Test-Empfänger-E-Mail`,sendTest:`Test-E-Mail senden`,sending:`Wird gesendet...`,save:`Einstellungen speichern`,saving:`Wird gespeichert...`,advancedAuth:`Erweiterte Authentifizierung`,advancedAuthEnabled:`Erweiterte Authentifizierung ist aktiviert`,advancedAuthEnabledDesc:`E-Mail-basierte Benutzerverwaltungsfunktionen sind aktiv. Neue Benutzer erhalten automatisch generierte Passwörter per E-Mail und können ihr Passwort über die Passwort vergessen Funktion zurücksetzen.`,advancedAuthDisabled:`Erweiterte Authentifizierung ist deaktiviert`,advancedAuthDisabledDesc:`Aktivieren Sie die erweiterte Authentifizierung, um E-Mail-basierte Funktionen für die Benutzerverwaltung zu aktivieren.`,enable:`Aktivieren`,disable:`Deaktivieren`,feature1:`Passwörter werden automatisch generiert und an neue Benutzer gesendet`,feature2:`Benutzer können sich mit Benutzername oder E-Mail anmelden`,feature3:`Passwort vergessen Funktion ist verfügbar`,feature4:`Administratoren können Benutzerpasswörter per E-Mail zurücksetzen`,errors:{requiredFields:`Bitte füllen Sie alle Pflichtfelder aus`,usernameRequired:`Benutzername ist erforderlich, wenn Authentifizierung aktiviert ist`,enterTestEmail:`Bitte geben Sie eine Test-E-Mail-Adresse ein`,smtpServerAndEmail:`Bitte füllen Sie SMTP-Server und Absender-E-Mail aus, bevor Sie testen`,usernamePasswordRequired:`Benutzername und Passwort sind erforderlich, wenn Authentifizierung aktiviert ist`,configureSmtpFirst:`Bitte konfigurieren und testen Sie zuerst die SMTP-Einstellungen`,enableAuthFirst:`Bitte aktivieren Sie zuerst die Authentifizierung, um E-Mail-basierte Funktionen nutzen zu können.`},success:{settingsSaved:`SMTP-Einstellungen erfolgreich gespeichert`},securityOptions:{starttls:`STARTTLS (Port 587)`,ssl:`SSL/TLS (Port 465)`,none:`Keine (Port 25)`},authOptions:{enabled:`Aktiviert`,disabled:`Deaktiviert`}},appearance:`Erscheinungsbild`,notifications:`Benachrichtigungen`,smartPlugs:`Smart Plugs`,spoolman:`Spoolman`,updates:`Aktualisierungen`,language:`Sprache`,languageDescription:`Wählen Sie Ihre bevorzugte Sprache`,theme:`Design`,themeLight:`Hell`,themeDark:`Dunkel`,themeSystem:`System`,defaultView:`Standardansicht`,defaultViewDescription:`Seite, die beim Öffnen der App angezeigt wird`,checkForUpdates:`Nach Updates suchen`,autoUpdate:`Automatische Updates`,currentVersion:`Aktuelle Version`,latestVersion:`Neueste Version`,upToDate:`Sie sind auf dem neuesten Stand`,updateAvailable:`Update verfügbar`,notificationLanguage:`Benachrichtigungssprache`,notificationLanguageDescription:`Sprache für Push-Benachrichtigungen`,bedCooledThreshold:`Bett-Abkühlung Schwellenwert`,bedCooledThresholdDescription:`Temperatur, unter der das Bett nach einem Druck als abgekühlt gilt`,userNotificationsEnabled:`Benutzerbenachrichtigungen`,userNotificationsEnabledDescription:`Aktiviert das Benutzerbenachrichtigungsmenü und E-Mail-Benachrichtigungen für Druckereignisse. Erfordert Erweiterte Authentifizierung.`,userNotificationsDisabledHint:`Erweiterte Authentifizierung aktivieren, um Benutzerbenachrichtigungen zu verwenden.`,notificationProviders:`Benachrichtigungsanbieter`,addProvider:`Anbieter hinzufügen`,editProvider:`Anbieter bearbeiten`,providerType:`Anbietertyp`,testNotification:`Testbenachrichtigung`,testSuccess:`Testbenachrichtigung erfolgreich gesendet`,testFailed:`Testbenachrichtigung konnte nicht gesendet werden`,quietHours:`Ruhezeiten`,quietHoursDescription:`Keine Störungen während dieser Zeiten`,quietHoursStart:`Beginn`,quietHoursEnd:`Ende`,events:{title:`Benachrichtigungsereignisse`,printStart:`Druck gestartet`,printComplete:`Druck abgeschlossen`,printFailed:`Druck fehlgeschlagen`,printStopped:`Druck gestoppt`,printProgress:`Fortschrittsmeldungen`,printProgressDescription:`Bei 25%, 50%, 75% benachrichtigen`,printerOffline:`Drucker offline`,printerError:`Druckerfehler`,filamentLow:`Filament niedrig`,maintenanceDue:`Wartung fällig`,maintenanceDueDescription:`Benachrichtigen, wenn Wartung erforderlich`},smartPlug:{title:`Smart Plugs`,add:`Smart Plug hinzufügen`,edit:`Smart Plug bearbeiten`,name:`Name`,ipAddress:`IP-Adresse`,linkedPrinter:`Verknüpfter Drucker`,autoOn:`Automatisch einschalten`,autoOnDescription:`Einschalten beim Druckstart`,autoOff:`Automatisch ausschalten`,autoOffDescription:`Ausschalten nach Druckende`,offDelay:`Ausschaltverzögerung`,offDelayMinutes:`Minuten nach Druck`,offDelayTemp:`Wenn Düse unter Temperatur`,currentState:`Aktueller Status`,turnOn:`Einschalten`,turnOff:`Ausschalten`},filamentTracking:`Filament-Verfolgung`,filamentTrackingDesc:`Wählen Sie, wie Sie Ihre Filamentspulen verfolgen möchten. Sie können das integrierte Inventar oder einen externen Spoolman-Server verwenden.`,autoAddUnknownRfid:`Unbekannte RFID-Spulen automatisch hinzufügen`,autoAddUnknownRfidDesc:`Erstellt automatisch einen Inventareintrag, wenn eine Spule mit unbekanntem RFID-Tag erkannt wird. Deaktivieren, wenn Sie neue Spulen vorab manuell anlegen, um Duplikate zu vermeiden.`,filamentChecks:`Filament-Prüfungen`,disableFilamentWarnings:`Filament-Warnungen deaktivieren`,disableFilamentWarningsDesc:`Keine Warnungen über unzureichendes Filament beim Drucken oder Einreihen anzeigen`,preferLowestFilament:`Niedrigsten Filamentrest bevorzugen`,preferLowestFilamentDesc:`Bei mehreren passenden Spulen die mit dem geringsten Restfilament verwenden`,preferLowestFilamentBackupNote:`Wirkt nur, wenn AMS Filament Backup am Drucker aktiviert ist — sonst kann der Drucker beim Aufbrauchen der ersten Spule nicht auf eine zweite Spule wechseln.`,trackingModeBuiltIn:`Integriertes Inventar`,trackingModeBuiltInDesc:`RFID-Erkennung und Verbrauchserfassung inklusive`,trackingModeSpoolmanDesc:`Externer Filament-Management-Server`,builtInFeatureRfid:`Erkennt automatisch Bambu Lab RFID-Spulen im AMS`,builtInFeatureUsage:`Erfasst den Filamentverbrauch pro Druck`,builtInFeatureCatalog:`Spulen, Farben und K-Faktor-Profile verwalten`,builtInFeatureThirdParty:`Drittanbieter-Spulen können Inventarspulen zugewiesen werden`,amsSyncButton:`Gewichte vom AMS synchronisieren`,amsSyncTitle:`Spulengewichte vom AMS synchronisieren`,amsSyncMessage:`Alle Inventar-Spulengewichte werden mit den aktuellen AMS-Restwerten der verbundenen Drucker überschrieben. Verwenden Sie dies zur Wiederherstellung beschädigter Gewichtsdaten. Drucker müssen online sein.`,amsSyncing:`Synchronisiere...`,amsSyncSuccess:`{{synced}} Spule(n) synchronisiert, {{skipped}} übersprungen`,amsSyncError:`Synchronisierung der Gewichte vom AMS fehlgeschlagen`,spoolmanAmsSyncButton:`Spoolman-Gewichte vom AMS synchronisieren`,spoolmanAmsSyncTitle:`Spoolman-Spulengewichte vom AMS synchronisieren`,spoolmanAmsSyncMessage:`Dabei werden alle Spoolman-Spulengewichte anhand der aktuellen AMS-Füllstandswerte der verbundenen Drucker aktualisiert. Die Drucker müssen online sein.`,spoolmanAmsSyncing:`Synchronisiere...`,spoolmanAmsSyncSuccess:`{{synced}} Spule(n) synchronisiert, {{skipped}} übersprungen`,spoolmanAmsSyncError:`Synchronisierung der Spoolman-Gewichte vom AMS fehlgeschlagen`,spoolmanAmsSyncErrorUnreachable:`Synchronisierung fehlgeschlagen (Spoolman nicht erreichbar)`,spoolmanAmsSyncErrorNotConfigured:`Synchronisierung fehlgeschlagen (Spoolman nicht konfiguriert)`,spoolmanNotConfigured:`Spoolman nicht konfiguriert`,spoolmanFilamentCatalogTitle:`Spoolman-Filamentkatalog`,spoolmanFilamentCatalogDesc:`Filamentnamen und Leergewichte aus deiner Spoolman-Instanz. Name und Spulengewicht sind hier editierbar; alle anderen Eigenschaften werden direkt in Spoolman verwaltet.`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`URL Ihres Spoolman-Servers (z.B. http://localhost:7912)`,spoolmanConnected:`Verbunden`,spoolmanDisconnected:`Nicht verbunden`,status:`Status`,connect:`Verbinden`,disconnect:`Trennen`,howSyncWorks:`So funktioniert die Synchronisierung`,syncInfoRfidOnly:`Nur offizielle Bambu Lab Spulen mit RFID werden synchronisiert`,syncInfoAutoCreate:`Neue Spulen werden bei der ersten Synchronisierung automatisch in Spoolman erstellt`,syncInfoThirdPartySkipped:`Nicht-Bambu-Lab-Spulen (Drittanbieter, nachgefüllt) werden übersprungen`,linkingExistingSpools:`Vorhandene Spulen verknüpfen`,linkingExistingSpoolsDesc:`Um vorhandene Spoolman-Spulen mit Ihrem AMS zu verknüpfen, fahren Sie über einen AMS-Slot und klicken Sie auf "Mit Spoolman verknüpfen".`,syncMode:`Synchronisierungsmodus`,syncModeAuto:`Automatisch`,syncModeManual:`Nur manuell`,syncModeAutoDesc:`AMS-Daten werden automatisch synchronisiert, wenn Änderungen erkannt werden`,syncModeManualDesc:`Nur bei manueller Auslösung synchronisieren`,syncAmsData:`AMS-Daten synchronisieren`,syncAmsDataDesc:`AMS-Daten des Druckers manuell mit Spoolman synchronisieren`,allPrinters:`Alle Drucker`,noDefaultPrinter:`Kein Standard (jedes Mal fragen)`,sidebarOrder:`Seitenleisten-Reihenfolge`,saveThumbnails:`Vorschaubilder speichern`,captureFinishPhoto:`Abschlussfoto aufnehmen`,noPrintersConfigured:`Keine Drucker konfiguriert`,archiveMode:{always:`Immer Archiveintrag erstellen`,never:`Nie Archiveintrag erstellen`,ask:`Jedes Mal fragen`},checkForUpdatesLabel:`Nach Updates suchen`,checkPrinterFirmware:`Drucker-Firmware prüfen`,includeBetaUpdates:`Beta-Versionen einschließen`,includeBetaUpdatesDesc:`Über Beta- und Vorabversionen bei der Updateprüfung benachrichtigen`,localLogin:{disable:`Lokale Benutzername-/Passwort-Anmeldung deaktivieren`,disableHint:`Wenn aktiviert, ist nur die Anmeldung über SSO möglich. LDAP ist davon nicht betroffen. Setzen Sie BAMBUDDY_LOCAL_LOGIN=true auf dem Server, um einen Wiederherstellungsweg offen zu halten.`},enableRetry:`Wiederholung aktivieren`,homeAssistantDescription:`Smart Plugs über Home Assistant steuern`,environmentManagedLabel:`(Umgebungsvariable)`,autoEnabledViaEnv:`Automatisch über Umgebungsvariablen aktiviert`,urlFromEnvReadOnly:`Wert wird über HA_URL Umgebungsvariable gesetzt (schreibgeschützt)`,tokenFromEnvReadOnly:`Wert wird über HA_TOKEN Umgebungsvariable gesetzt (schreibgeschützt)`,mqttConnectedTo:`Verbunden mit`,prometheusDescription:`Druckerdaten im Prometheus-Format bereitstellen`,noSmartPlugsTitle:`Keine Smart Plugs konfiguriert`,noSmartPlugsDescription:`Fügen Sie einen Tasmota-basierten Smart Plug hinzu, um den Energieverbrauch zu verfolgen und die Stromsteuerung zu automatisieren.`,noProvidersTitle:`Keine Anbieter konfiguriert`,noProvidersDescription:`Fügen Sie einen Anbieter hinzu, um Benachrichtigungen zu erhalten.`,noTemplatesAvailable:`Keine Vorlagen verfügbar. Starten Sie das Backend neu, um Standardvorlagen zu laden.`,apiPermissionView:`Druckerstatus und Warteschlange anzeigen`,apiPermissionEdit:`Elemente zur Druckwarteschlange hinzufügen und entfernen`,apiKeysEmptyTitle:`Keine API-Schlüssel`,apiKeysEmptyDescription:`Erstellen Sie einen API-Schlüssel zur Integration mit externen Diensten.`,noUsersFound:`Keine Benutzer gefunden`,noGroupsFound:`Keine Gruppen gefunden`,noGroupsAvailable:`Keine Gruppen verfügbar`,passwordsDoNotMatch:`Passwörter stimmen nicht überein`,systemGroupWarning:`System-Gruppennamen können nicht geändert werden`,authDisabledTitle:`Authentifizierung ist deaktiviert`,authDisabledFeature1:`Anmeldung zum Zugriff auf das System erforderlich`,authDisabledFeature2:`Mehrere Benutzer mit gruppenbasierten Berechtigungen erstellen`,authDisabledFeature3:`Zugriff mit über 50 granularen Berechtigungen steuern`,userHasCreated:`Dieser Benutzer hat erstellt:`,userItemsQuestion:`Was möchten Sie mit diesen Elementen tun?`,deleteUserConfirm:`Möchten Sie diesen Benutzer wirklich löschen?`,actionCannotBeUndone:`Diese Aktion kann nicht rückgängig gemacht werden.`,addFirstSmartPlug:`Ersten Smart Plug hinzufügen`,providers:`Anbieter`,log:`Protokoll`,testAll:`Alle testen`,testResults:`Testergebnisse`,testPassedCount:`{{count}} bestanden`,testFailedCount:`{{count}} fehlgeschlagen`,messageTemplates:`Nachrichtenvorlagen`,messageTemplatesDescription:`Passen Sie Benachrichtigungen für jedes Ereignis an.`,apiKeys:`API-Schlüssel`,apiKeysDescription:`Erstellen Sie API-Schlüssel für externe Integrationen und Webhooks.`,createKey:`Schlüssel erstellen`,apiKeyCreated:`API-Schlüssel erfolgreich erstellt`,apiKeyCopyWarning:`Kopieren Sie diesen Schlüssel jetzt - er wird nicht mehr angezeigt!`,useInApiBrowser:`Im API-Browser verwenden`,apiKeyQrButton:`QR-Code`,apiKeyQrTitle:`Zum Einrichten scannen`,apiKeyQrCaption:`Mit deiner mobilen App scannen, um diesen Server und API-Schlüssel hinzuzufügen.`,apiKeyQrWarning:`Enthält deinen geheimen API-Schlüssel – nicht teilen oder dort abfotografieren, wo andere ihn sehen können.`,createNewApiKey:`Neuen API-Schlüssel erstellen`,keyName:`Schlüsselname`,keyNamePlaceholder:`z.B. Home Assistant, OctoPrint`,readStatus:`Status lesen`,readStatusDescription:`Druckerstatus, Warteschlange, Bibliothek, Archive und Slicer-Pipelines anzeigen`,manageQueue:`Warteschlange verwalten`,manageQueueDescription:`Elemente zur Druckwarteschlange hinzufügen und entfernen. Zusammen mit "Bibliothek verwalten" Slicer-Pipelines ausführen`,controlPrinter:`Drucker steuern`,controlPrinterDescription:`Drucke pausieren, fortsetzen und stoppen`,manageLibrary:`Bibliothek verwalten`,manageLibraryDescription:`Bibliotheksdateien hochladen, umbenennen, löschen und slicen; Modelle aus MakerWorld importieren. Zusammen mit "Warteschlange verwalten" Slicer-Pipelines ausführen`,manageInventory:`Bestand verwalten`,manageInventoryDescription:`Spulen und Bestandseinträge anlegen, ändern und löschen. Erforderlich für SpoolBuddy-Kioske (NFC-Scan, Waagenmessungen, Kiosk-Systembefehle).`,manageMaintenance:`Wartung verwalten`,manageMaintenanceDescription:`Abgeschlossene Wartungen protokollieren, Zähler zurücksetzen, Intervalle bearbeiten und den Wartungstyp-Katalog verwalten. Geeignet für Home-Assistant-Automatisierungen, die „Düse gereinigt" protokollieren, ohne umfassendere Druckersteuerung zu gewähren.`,manageArchives:`Archive verwalten`,manageArchivesDescription:`Druckarchive bearbeiten und löschen, einschließlich des Entfernens alter Drucke und ihres Statistikbeitrags. Geeignet für Automatisierungen, die den Druckverlauf ausdünnen.`,manageProjects:`Projekte verwalten`,manageProjectsDescription:`Projekte erstellen, aktualisieren und löschen sowie Archive zu ihnen hinzufügen. Geeignet für Automatisierungen, die Drucke in Projekten organisieren.`,maintenanceBadge:`Wartung`,archivesBadge:`Archive`,projectsBadge:`Projekte`,libraryBadge:`Bibliothek`,inventoryBadge:`Bestand`,cloudAccess:`Cloud-Zugriff erlauben`,cloudAccessDescription:`Liest Bambu-Cloud-Presets und -Filamente in Ihrem Namen. Erfordert eine Anmeldung in Bambu Cloud.`,cloudBadge:`Cloud`,updateEnergyCost:`Strompreis aktualisieren`,updateEnergyCostDescription:`Erlaubt diesem Schlüssel, einen neuen Strompreis pro kWh an /settings/electricity-price zu senden. Nützlich für Home-Assistant-Automatisierungen mit dynamischen Tarifen (Tibber, Octopus usw.). Dies ist das einzige Einstellungsfeld, das per API-Schlüssel schreibbar ist.`,energyCostBadge:`Energie`,legacyKey:`Alt`,legacyKeyTooltip:`Wurde vor der nutzerbezogenen Eigentümerschaft erstellt; neu erstellen, um Cloud-Zugriff zu nutzen`,unnamedKey:`Unbenannter Schlüssel`,lastUsed:`Zuletzt verwendet`,read:`Lesen`,control:`Steuern`,createFirstKey:`Ersten Schlüssel erstellen`,webhookEndpoints:`Webhook-Endpunkte`,webhookApiKeyHint:`Verwenden Sie Ihren API-Schlüssel im X-API-Key-Header.`,webhook:{getAllStatus:`Alle Druckerstatus abrufen`,getSpecificStatus:`Spezifischen Druckerstatus abrufen`,addToQueue:`Zur Druckwarteschlange hinzufügen`,pausePrint:`Druck pausieren`,resumePrint:`Druck fortsetzen`,stopPrint:`Druck stoppen`},apiBrowser:`API-Browser`,apiBrowserDescription:`Erkunden und testen Sie alle verfügbaren API-Endpunkte.`,apiKeyForTesting:`API-Schlüssel zum Testen`,apiKeyPlaceholder:`Fügen Sie hier Ihren API-Schlüssel ein, um authentifizierte Endpunkte zu testen...`,apiKeyHint:`Dieser Schlüssel wird als X-API-Key-Header mit Anfragen gesendet.`,deleteApiKeyTitle:`API-Schlüssel löschen`,deleteApiKeyMessage:`Möchten Sie diesen API-Schlüssel wirklich löschen? Alle Integrationen, die diesen Schlüssel verwenden, funktionieren nicht mehr.`,deleteKey:`Schlüssel löschen`,amsDisplayThresholds:`AMS-Anzeigeschwellenwerte`,amsThresholdsDescription:`Konfigurieren Sie Farbschwellenwerte für AMS-Feuchtigkeits- und Temperaturanzeigen.`,humidity:`Luftfeuchtigkeit`,goodGreen:`Gut (grün)`,fairOrange:`Mittel (orange)`,aboveFairBad:`Über dem mittleren Schwellenwert wird rot angezeigt (schlecht)`,fairAlsoDryingThreshold:`Dieser Schwellenwert wird auch für die automatische Trocknung verwendet`,fairBelowDryingFloor:`Die automatische Trocknung kann diesen Wert nicht erreichen: Ein AMS meldet bei laufender Heizung {{floor}} % oder mehr, sodass jeder Zyklus enden und sofort neu starten würde. Setzen Sie ihn über {{floor}} %, wenn die automatische Trocknung aktiv ist.`,temperature:`Temperatur`,goodBlue:`Gut (blau)`,aboveFairHot:`Über dem mittleren Schwellenwert wird rot angezeigt (heiß)`,tempAlarmThreshold:`Alarm über`,tempAlarmSeparateFromBand:`Nur der Alarm-Schwellenwert löst Benachrichtigungen aus — Gut und Mittel färben nur die Anzeige. Leer lassen, um wie bisher beim mittleren Schwellenwert zu alarmieren.`,tempAlarmMustBePositive:`Ein Schwellenwert von 0 oder weniger wird ignoriert — der Alarm nutzt dann den mittleren Schwellenwert.`,historyRetention:`Verlaufsaufbewahrung`,keepSensorHistory:`Sensorverlauf behalten für`,historyRetentionDescription:`Ältere Feuchtigkeits- und Temperaturdaten werden automatisch gelöscht`,defaultPrintOptions:`Standard-Druckoptionen`,defaultPrintOptionsDescription:`Standardwerte für Druckoptionen bei neuen Drucken festlegen. Diese können im Druckdialog pro Druck überschrieben werden.`,defaultBedLevelling:`Bett-Nivellierung`,defaultBedLevellingDesc:`Bett vor dem Druck automatisch nivellieren`,defaultFlowCali:`Fluss-Kalibrierung`,defaultFlowCaliDesc:`Extrusionsfluss kalibrieren`,defaultVibrationCali:`Vibrationskalibrierung`,defaultVibrationCaliDesc:`Ringing-Artefakte reduzieren`,defaultLayerInspect:`Erste-Schicht-Inspektion`,defaultLayerInspectDesc:`KI-Inspektion der ersten Schicht`,defaultTimelapse:`Zeitraffer`,defaultTimelapseDesc:`Zeitraffervideo aufnehmen`,defaultNozzleOffsetCali:`Düsenversatz-Kalibrierung`,defaultNozzleOffsetCaliDesc:`Düsenversatz zwischen Extrudern kalibrieren`,tempFanPresetsTitle:`Temperatur- und Lüfter-Vorgaben`,tempFanPresetsDescription:`Passen Sie die Schnellwahlwerte in den Temperatur- und Lüfter-Popovers der Druckerkarte an. Die Aus-Schaltfläche wird immer angezeigt.`,tempFanPresetsNozzle:`Düsentemperatur`,tempFanPresetsBed:`Betttemperatur`,tempFanPresetsChamber:`Kammertemperatur`,tempFanPresetsFan:`Lüftergeschwindigkeit`,tempFanPresetsReset:`Auf Standardwerte zurücksetzen`,concurrentUploadsTitle:`Gleichzeitige Uploads`,concurrentUploadsDescription:`Wie viele Drucker die Warteschlange gleichzeitig mit Dateien versorgen darf. Drucker nehmen Dateien nur langsam entgegen (ein großer Druck kann mehrere Minuten dauern), und jeder wartet, bis er an der Reihe ist — bei größeren Farmen verhindert ein höherer Wert also, dass der letzte Drucker eines Stapels erst alle anderen Übertragungen abwarten muss. Verringern Sie ihn, wenn Ihr Netzwerk oder der Bambuddy-Host mit parallelen Übertragungen Probleme hat.`,concurrentUploadsLabel:`Gleichzeitig belieferte Drucker`,concurrentUploadsHelp:`1 beliefert immer nur einen Drucker (das bisherige Verhalten). Standard ist 4.`,staggeredStart:`Versetzter Start`,staggeredStartDescription:`Standard-Gruppengröße und -Intervall beim Staffeln von Mehrdrucker-Batchstarts. Pro Batch im Druck-Dialog überschreibbar.`,preheatTitle:`Vorheizen & Heat Soak`,preheatDescription:`Heizt das Bett (und die Kammer, sofern unterstützt) auf und hält die Temperatur, bevor jeder Druck aus der Warteschlange startet. Hilfreich für technische Filamente (PA, ABS) auf Druckern ohne aktive Kammerheizung — das Bett wärmt die Kammer per Abstrahlung, während der Soak-Timer läuft. Die Bett-Zieltemperatur wird aus der Druckdatei gelesen; das Kammerverhalten hängt vom Druckermodell ab.`,preheatEnabled:`Vorheizen & Soak aktivieren`,preheatEnabledDesc:`Wenn aus, starten Drucke aus der Warteschlange sofort. Jeder Warteschlangeneintrag kann das pro Druck überschreiben.`,preheatFilamentTargetsLabel:`Kammer-Ziel je Filament (°C)`,preheatFilamentTargetsHint:`Bambuddy wählt das höchste Ziel über die geladenen AMS-Slots. Ein Druck, dessen Slots alle 0 ergeben – PLA, PETG, TPU, PVA –, überspringt das Vorheizen vollständig und startet sofort.`,preheatFilamentTargetsReset:`Auf Standardwerte zurücksetzen`,preheatFilamentTargetsDefaultRow:`Sonstige / nicht zugeordnet`,preheatMaxWait:`Max. Wartezeit (Sekunden)`,preheatMaxWaitHelp:`Obergrenze für die Aufwärmphase, bevor in den Soak gewechselt wird.`,preheatSoak:`Soak (Sekunden)`,preheatSoakHelp:`Haltezeit nach Erreichen des Ziels oder nach Ablauf der Max-Wartezeit.`,preheatHardwareTitle:`Verhalten je Drucker:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E heizen die Kammer aktiv per M141. X1C/P2S lesen die Kammertemperatur, heizen sie aber nur per Bett-Abstrahlung. P1S/P1P/A1/A1 Mini haben keinen Kammersensor — nur der Soak-Timer greift.`,preheatPerItemDesc:`Bett und Kammer vor diesem Druck aufheizen. Standardmäßig wird der globale Umschalter aus Einstellungen → Workflow verwendet.`,preheatOverride_inherit:`Übernehmen`,preheatOverride_on:`An`,preheatOverride_off:`Aus`,calibrationMode_off:`Aus`,calibrationMode_on:`An`,calibrationMode_auto:`Auto`,preheatTargetOverride:`Kammer-Ziel überschreiben (°C, leer = Filament-Standard)`,preheatTargetOverrideHelp:`0 heizt das Bett und führt das Halten ohne Kammer aus. Bleibt das Feld leer, überspringt ein Druck ohne Kammerbedarf das Vorheizen vollständig.`,plateClear:`Druckplatte-Bestätigung`,requirePlateClear:`Druckplatte-Bestätigung erforderlich`,requirePlateClearDescription:`Wenn aktiviert, wartet der Scheduler auf eine Druckplatten-Bestätigung pro Drucker, bevor geplante Drucke auf Druckern mit abgeschlossenen Aufträgen gestartet werden. Wenn dies deaktiviert ist, werden auch das Druckplatten-Status-Badge und die Schaltfläche "Druckplatte als freigegeben markieren" auf den Druckerkarten ausgeblendet.`,keepBedWarm:`Heizbett zwischen Drucken warmhalten`,keepBedWarmDesc:`Während auf die Druckplatten-Bestätigung gewartet wird, wird das Heizbett auf der unten eingestellten Warmhalte-Temperatur gehalten, damit die Kammer warm bleibt — oder auf der Betttemperatur des nächsten Drucks, falls diese höher ist. Gilt nur, wenn der nächste Druck Kammerwärme benötigt (ASA, ABS, PA, PC usw.). Erfordert aktivierte Druckplatten-Bestätigung.`,keepWarmBedTemp:`Warmhalte-Temperatur des Heizbetts (°C)`,keepWarmBedTempHelp:`Wird verwendet, wenn das Bett die Kammer heizen soll — beim Warmhalten und beim Vorheizen, wenn die Druckdatei keine Betttemperatur enthält. Eine höhere Betttemperatur aus der Druckdatei hat immer Vorrang.`,keepWarmMaxMinutes:`Warmhalten beenden nach (Minuten)`,keepWarmMaxMinutesHelp:`Wird die Druckplatte nicht innerhalb dieser Zeit geleert, werden die Heizungen abgeschaltet statt dauerhaft zu heizen.`,gcodeInjection:`G-Code-Injektion`,gcodeInjectionDescription:`Konfigurieren Sie benutzerdefinierten G-code, der am Anfang und/oder Ende von Drucken für Auto-Print-Systeme wie Farmloop, SwapMod, AutoClear und Printflow 3D eingefügt wird. Snippets werden pro Druckermodell konfiguriert und angewendet, wenn "G-code einfügen" bei einem Warteschlangen-Element aktiviert ist.`,gcodeInjectionNoPrinters:`Keine Drucker gefunden. Fügen Sie Drucker hinzu, um G-code-Snippets zu konfigurieren.`,gcodeStartLabel:`Start-G-Code`,gcodeEndLabel:`End-G-Code`,gcodeStartPlaceholder:`G-code, der vor dem Druckstart eingefügt wird...`,gcodeEndPlaceholder:`G-code, der nach dem Druckende angefügt wird...`,staggerGroupSize:`Gruppengröße`,staggerGroupSizeHelp:`Anzahl gleichzeitig zu startender Drucker pro Gruppe`,staggerInterval:`Intervall (Minuten)`,staggerIntervalHelp:`Verzögerung zwischen Gruppenstart`,queueDrying:`Automatische Trocknung`,queueDryingDescription:`AMS-Filament automatisch trocknen, wenn der Drucker zwischen Warteschlangen-Drucken im Leerlauf ist. Verwendet den Feuchtigkeitsschwellenwert oben.`,queueDryingEnabled:`Automatische Trocknung aktivieren`,queueDryingEnabledDescription:`AMS-Trocknung automatisch starten, wenn der Drucker im Leerlauf ist und die Feuchtigkeit über dem Schwellenwert liegt`,queueDryingBlock:`Auf Trocknung warten`,queueDryingBlockDescription:`Druckwarteschlange blockieren, bis die Trocknung abgeschlossen ist. Wenn aus, haben Drucke Vorrang.`,ambientDryingEnabled:`Umgebungstrocknung`,ambientDryingEnabledDescription:`Filament auf inaktiven Druckern automatisch trocknen, wenn die Luftfeuchtigkeit den Schwellenwert überschreitet — auch ohne Warteschlange.`,printDryingEnabled:`Trocknen während des Drucks`,printDryingEnabledDescription:`Automatische Trocknung auch während eines laufenden Drucks auf unterstützter Hardware (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L mit aktueller Firmware). Die Trocknungstemperatur wird zum Schutz der Spulen automatisch um 5°C unter dem Leerlaufwert begrenzt.`,dryingPresets:`Trocknungsvoreinstellungen`,dryingPresetsDescription:`Temperatur und Dauer pro Filamenttyp. AMS 2 Pro verwendet niedrigere Temperaturen, AMS-HT unterstützt höhere.`,dryingFilament:`Filament`,humidityThresholds:`Feuchtigkeitsschwellen`,humidityThresholdsDescription:`Feuchtigkeitsauslöser pro Filamenttyp für Auto-Trocknung und Alarme. Bei gemischter Bestückung gilt der niedrigste Wert.`,humidityThresholdCol:`Schwellenwert`,humidityThresholdDefault:`Standard (unbekannte Typen)`,printModal:`Druckdialog`,expandCustomMapping:`Benutzerdefinierte Zuordnung standardmäßig erweitern`,expandCustomMappingDescription:`Bei Druck auf mehrere Drucker die AMS-Zuordnung pro Drucker erweitert anzeigen`,authentication:`Authentifizierung`,authEnabledDescription:`Ihre Instanz ist mit Benutzerauthentifizierung gesichert`,authDisabledDescription:`Aktivieren Sie die Anmeldepflicht und verwalten Sie den Benutzerzugriff`,authDisabledMessage:`Aktivieren Sie die Authentifizierung, um Benutzerkonten zu erstellen, Berechtigungen zu verwalten und Ihre Bambuddy-Instanz zu sichern.`,enableAuthentication:`Authentifizierung aktivieren`,currentUser:`Aktueller Benutzer`,changePassword:`Passwort ändern`,admin:`Admin`,users:`Benutzer`,addUser:`Benutzer hinzufügen`,groups:`Gruppen`,addGroup:`Gruppe hinzufügen`,system:`System`,noDescription:`Keine Beschreibung`,userCount:`{{count}} Benutzer`,permissionCount:`{{count}} Berechtigungen`,createUser:`Benutzer erstellen`,username:`Benutzername`,enterUsername:`Benutzername eingeben`,password:`Passwort`,enterPassword:`Passwort eingeben`,passwordRequirements:`Mindestens 8 Zeichen, davon ein Großbuchstabe, ein Kleinbuchstabe, eine Ziffer und ein Sonderzeichen.`,confirmPassword:`Passwort bestätigen`,confirmPasswordPlaceholder:`Passwort bestätigen`,viewReleaseOnGitHub:`Release auf GitHub anzeigen`,turnAllPlugsOn:`Alle Stecker einschalten`,turnAllPlugsOff:`Alle Stecker ausschalten`,clearNotificationLogs:`Benachrichtigungsprotokolle löschen`,clearLogsMessage:`Dadurch werden alle Benachrichtigungsprotokolle, die älter als 30 Tage sind, dauerhaft gelöscht. Diese Aktion kann nicht rückgängig gemacht werden.`,clearLogs:`Protokolle löschen`,resetUiPreferences:`UI-Einstellungen zurücksetzen`,resetUiPreferencesMessage:`Dadurch werden alle UI-Einstellungen auf Standardwerte zurückgesetzt: Seitenleisten-Reihenfolge, Theme, Dashboard-Layout, Ansichtsmodi und Sortiereinstellungen. Ihre Drucker, Archive und Servereinstellungen werden NICHT beeinträchtigt. Die Seite wird nach dem Löschen neu geladen.`,resetPreferences:`Einstellungen zurücksetzen`,deleteGroupTitle:`Gruppe löschen`,deleteGroupMessage:`Möchten Sie diese Gruppe wirklich löschen? Benutzer in dieser Gruppe verlieren diese Berechtigungen.`,deleteGroup:`Gruppe löschen`,disableAuthenticationTitle:`Authentifizierung deaktivieren`,disableAuthenticationMessage:`Möchten Sie die Authentifizierung wirklich deaktivieren? Dadurch wird Ihre Bambuddy-Instanz ohne Anmeldung zugänglich. Alle Benutzer bleiben in der Datenbank, aber die Authentifizierung wird deaktiviert.`,disableAuthentication:`Authentifizierung deaktivieren`,configureBambuddy:`Bambuddy konfigurieren`,systemDefault:`Systemstandard`,archiveSettings:`Archiv-Einstellungen`,newWindow:`Neues Fenster`,embeddedOverlay:`Eingebettetes Overlay`,preferredSlicer:`Bevorzugter Slicer`,preferredSlicerDescription:`Slicer für das In-App-Slicen über das API-Sidecar`,openInSlicerLabel:`Im Slicer öffnen`,openInSlicerInherit:`Wie API-Slicer`,openInSlicerDescription:`Desktop-Slicer, der vom „Im Slicer öffnen"-Button verwendet wird. Auf „Wie API-Slicer" belassen, um zu erben, oder einen anderen Slicer für die lokale Nutzung wählen.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev haben bekannte CLI-Bugs, die das Slicen vieler von BambuStudio erstellter 3MF-Dateien blockieren — siehe Upstream-Issues #12426 (Segfault bei bemalten Multi-Extruder-Dateien) und #13386 (zu strikte Parameter-Range-Validierung). Bis die Upstream-Fixes verfügbar sind, wird Bambu Studio empfohlen.`,useSlicerApi:`Slicer-API verwenden`,useSlicerApiDescription:`Wenn aktiv, öffnen "Slice"-Aktionen das in-App Slicer-Modal und rufen den Slicer-API-Sidecar. Aus (Standard): Übergabe an den Desktop-Slicer per URI-Schema.`,slicerCard:`Slicer`,orcaslicerApiUrl:`OrcaSlicer Sidecar-URL`,bambuStudioApiUrl:`Bambu Studio Sidecar-URL`,slicerStallTimeout:`Zeitlimit bei Slicer-Stillstand (Minuten)`,slicerStallTimeoutDescription:`Bricht einen Slice-Vorgang ab, wenn der Sidecar so lange keinen Fortschritt meldet. Aufwendige Modelle, die weiter Fortschritt melden, werden nie abgebrochen, egal wie lange sie brauchen. Sidecars ohne Fortschrittsmeldung nutzen diesen Wert stattdessen als Gesamtzeitlimit.`,slicerApiUrlDescription:`URL des Slicer-API-Sidecar-Containers. Leer lassen, um die SLICER_API_URL- bzw. BAMBU_STUDIO_API_URL-Umgebungsvariablen zu nutzen.`,externalCameras:`Externe Kameras`,costTracking:`Kostenverfolgung`,billingEnabled:`Abrechnung aktivieren`,billingEnabledDescription:`Kostenstellen aktivieren und Drucke verbuchen`,printerKillSwitch:`Automatischer Druckstopp`,printerKillSwitchDescription:`Drucke ohne Authorisierung sofort abbrechen`,financeBudgetReset:`Finanzbudget monatlich zurücksetzen`,financeBudgetResetDay:`Reset-Tag`,financeBudgetResetDayHelp:`Für kurze Monate verwendet der Reset den letzten Tag des Monats.`,financeBudgetResetTimezone:`Reset-Zeitzone`,financeBudgetResetTimezoneHelp:`Der Budget-Fenster-Start wird in dieser Zeitzone berechnet.`,rebuildLedger:`Ledger wiederaufbauen`,rebuildLedgerStarted:`Ledger-Wiederaufbau gestartet`,rebuildLedgerConfirmTitle:`Ledger wiederaufbauen?`,rebuildLedgerConfirmMessage:`Dies baut das Wallet-Ledger neu auf, um historische Saldenwerte zu reparieren. Führen Sie dies nur aus, wenn Sie genau wissen, was Sie tun.`,rebuildLedgerInProgress:`Wiederaufbau wird gestartet...`,printsOnly:`Nur Drucke`,totalConsumption:`Gesamtverbrauch`,dataManagement:`Datenverwaltung`,storageUsage:`Speichernutzung`,storageUsageDescription:`Aufschlüsselung der Datennutzung nach Kategorie`,storageUsageTotal:`Gesamt`,storageUsageErrors:`Fehler`,storageUsageOtherBreakdown:`Sonstiges (enthält statische Assets, Skripte und Konfigurationsdateien)`,storageUsageSystem:`System`,storageUsageData:`Daten`,storageUsageUnavailable:`Speichernutzungsinformationen nicht verfügbar`,clearNotificationLogsDescription:`Benachrichtigungsprotokolle älter als 30 Tage löschen`,resetUiPreferencesDescription:`Seitenleisten-Reihenfolge, Theme, Ansichtsmodi und Layout-Einstellungen zurücksetzen. Drucker, Archive und Einstellungen werden nicht beeinflusst.`,enableHomeAssistant:`Home Assistant aktivieren`,enableMqtt:`MQTT aktivieren`,useTls:`TLS verwenden`,enableMetricsEndpoint:`Metrik-Endpunkt aktivieren`,availableMetrics:`Verfügbare Metriken`,editUser:`Benutzer bearbeiten`,deleteUserTitle:`Benutzer löschen`,groupName:`Gruppenname`,leaveEmptyForAnonymous:`Leer lassen für anonym`,leaveEmptyForNoAuth:`Leer lassen für keine Authentifizierung`,enterNewPassword:`Neues Passwort eingeben`,confirmNewPassword:`Neues Passwort bestätigen`,enterGroupName:`Gruppenname eingeben`,enterDescriptionOptional:`Beschreibung eingeben (optional)`,enterCurrentPassword:`Aktuelles Passwort eingeben`,enterNewPasswordMin6:`Neues Passwort eingeben (min. 6 Zeichen)`,toast:{keyCopied:`Schlüssel in Zwischenablage kopiert`,copyFailed:`Schlüssel konnte nicht kopiert werden`,keyAddedToBrowser:`Schlüssel zum API-Browser hinzugefügt`,clearLogsFailed:`Protokolle konnten nicht gelöscht werden`,uiPreferencesReset:`UI-Einstellungen zurückgesetzt. Wird neu geladen...`,authDisabled:`Authentifizierung erfolgreich deaktiviert`,authDisableFailed:`Authentifizierung konnte nicht deaktiviert werden`,apiKeyCreated:`API-Schlüssel erstellt`,apiKeyDeleted:`API-Schlüssel gelöscht`,userCreated:`Benutzer erfolgreich erstellt`,userUpdated:`Benutzer erfolgreich aktualisiert`,userDeleted:`Benutzer erfolgreich gelöscht`,groupCreated:`Gruppe erfolgreich erstellt`,groupUpdated:`Gruppe erfolgreich aktualisiert`,groupDeleted:`Gruppe erfolgreich gelöscht`,fillRequiredFields:`Bitte füllen Sie alle erforderlichen Felder aus`,passwordsDoNotMatch:`Passwörter stimmen nicht überein`,passwordTooShort:`Passwort muss mindestens 8 Zeichen lang sein`,passwordNeedsUppercase:`Passwort muss mindestens einen Großbuchstaben enthalten`,passwordNeedsLowercase:`Passwort muss mindestens einen Kleinbuchstaben enthalten`,passwordNeedsDigit:`Passwort muss mindestens eine Ziffer enthalten`,passwordNeedsSpecial:`Passwort muss mindestens ein Sonderzeichen enthalten`,enterGroupName:`Bitte geben Sie einen Gruppennamen ein`,settingsSaved:`Einstellungen gespeichert`,noPermissionUpdate:`Sie haben keine Berechtigung, Einstellungen zu ändern`,cameraSettingsSaved:`Kamera-Einstellungen gespeichert`,enterCameraUrl:`Bitte geben Sie eine Kamera-URL ein`,passwordChanged:`Passwort erfolgreich geändert`,connectionFailed:`Verbindung fehlgeschlagen`,testFailed:`Test fehlgeschlagen`,cameraConnected:`Kamera verbunden{{resolution}}`,cameraConnectedCoalesced:`Kamera verbunden{{resolution}} (geteilt mit einer bereits laufenden Aufnahme)`},testConnection:`Verbindung testen`,catalog:{spoolCatalog:`Spulenkatalog`,spoolCatalogDescription:`Leerspulengewichte nach Marke/Typ. Wird für die automatische Gewichtssuche beim Hinzufügen von Spulen verwendet.`,searchCatalog:`Katalog durchsuchen...`,addNewEntry:`Neuen Eintrag hinzufügen`,namePlaceholder:`Name (z.B. Bambu Lab - Plastik)`,weight:`Gewicht`,type:`Typ`,default:`Standard`,custom:`Benutzerdefiniert`,noMatch:`Keine Einträge entsprechen Ihrer Suche`,empty:`Keine Einträge im Katalog`,deleteEntry:`Eintrag löschen`,deleteConfirm:`Möchten Sie "{{name}}" wirklich löschen?`,resetCatalog:`Katalog zurücksetzen`,resetConfirm:`Katalog auf Standardwerte zurücksetzen? Alle benutzerdefinierten Einträge werden entfernt.`,loadFailed:`Spulenkatalog konnte nicht geladen werden`,nameWeightRequired:`Name und Gewicht sind erforderlich`,entryAdded:`Eintrag hinzugefügt`,addFailed:`Eintrag konnte nicht hinzugefügt werden`,entryUpdated:`Eintrag aktualisiert`,updateFailed:`Eintrag konnte nicht aktualisiert werden`,entryDeleted:`Eintrag gelöscht`,deleteFailed:`Eintrag konnte nicht gelöscht werden`,resetSuccess:`Katalog auf Standardwerte zurückgesetzt`,resetFailed:`Katalog konnte nicht zurückgesetzt werden`,exported:`{{count}} Einträge exportiert`,imported:`{{added}} Einträge importiert ({{skipped}} übersprungen)`,importFailed:`Import fehlgeschlagen: ungültiges JSON-Format`,exportTooltip:`Katalog als JSON exportieren`,importTooltip:`Katalog aus JSON importieren`,resetTooltip:`Auf Standardwerte zurücksetzen`,selectedCount:`{{count}} ausgewählt`,deleteSelected:`Ausgewählte löschen`,bulkDeleteConfirm:`Möchten Sie {{count}} Einträge wirklich löschen?`,bulkDeleted:`{{count}} Einträge gelöscht`,bulkDeleteFailed:`Fehler beim Löschen der Einträge`,material:`Material`,spoolWeight:`Spulengewicht`,color:`Farbe`,updateSpoolWeight:`Spulengewicht aktualisieren`,filamentUpdated:`Filament aktualisiert`,filamentUpdateFailed:`Filament konnte nicht aktualisiert werden`,filamentUpdateInvalid:`Ungültige Filamentdaten`,keepExistingSpoolWeight:`Altes Gewicht für bestehende Spulen behalten`,keepExistingSpoolWeightDesc:`Bereits erstellte Spulen dieses Filamenttyps behalten das alte Leergewicht. Neue Spulen nutzen den neuen Wert.`,applyToAllSpools:`Auf alle Spulen anwenden`,applyToAllSpoolsDesc:`Alle Gewichtsberechnungen für diesen Filamenttyp nutzen sofort das neue Leergewicht.`},colorCatalog:{title:`Farbkatalog`,description:`Filamentfarben nach Hersteller/Material. Wird für die automatische Farbsuche beim Hinzufügen von Spulen verwendet.`,searchColors:`Farben durchsuchen...`,allManufacturers:`Alle Hersteller`,addNewColor:`Neue Farbe hinzufügen`,manufacturer:`Hersteller`,colorName:`Farbname`,hex:`Hex`,materialOptional:`Material (optional)`,showing:`{{filtered}} von {{total}} Farben angezeigt`,noMatch:`Keine Farben entsprechen Ihrer Suche`,empty:`Keine Farben im Katalog`,deleteColor:`Farbe löschen`,deleteConfirm:`Möchten Sie "{{name}}" wirklich löschen?`,resetCatalog:`Farbkatalog zurücksetzen`,resetConfirm:`Katalog auf Standardwerte zurücksetzen? Alle benutzerdefinierten Farben werden entfernt.`,sync:`Synchron.`,starting:`Starten...`,syncTooltip:`Von FilamentColors.xyz synchronisieren (2000+ Farben)`,loadFailed:`Farbkatalog konnte nicht geladen werden`,fieldsRequired:`Hersteller, Farbname und Hex-Farbe sind erforderlich`,colorAdded:`Farbe hinzugefügt`,addFailed:`Farbe konnte nicht hinzugefügt werden`,colorUpdated:`Farbe aktualisiert`,updateFailed:`Farbe konnte nicht aktualisiert werden`,colorDeleted:`Farbe gelöscht`,deleteFailed:`Farbe konnte nicht gelöscht werden`,resetSuccess:`Farbkatalog auf Standardwerte zurückgesetzt`,resetFailed:`Katalog konnte nicht zurückgesetzt werden`,syncUpToDate:`Bereits aktuell ({{count}} Farben geprüft)`,syncComplete:`{{added}} neue Farben hinzugefügt ({{skipped}} bereits vorhanden)`,syncError:`Sync-Fehler`,syncFailed:`Synchronisierung von FilamentColors.xyz fehlgeschlagen`,exported:`{{count}} Farben exportiert`,imported:`{{added}} Farben importiert ({{skipped}} übersprungen)`,importFailed:`Import fehlgeschlagen: ungültiges JSON-Format`,selectedCount:`{{count}} ausgewählt`,deleteSelected:`Ausgewählte löschen`,bulkDeleteConfirm:`Möchten Sie {{count}} Farben wirklich löschen?`,bulkDeleted:`{{count}} Farben gelöscht`,bulkDeleteFailed:`Fehler beim Löschen der Farben`},dateFormat:`Datumsformat`,dateFormatUs:`US (MM/TT/JJJJ)`,dateFormatEu:`EU (TT/MM/JJJJ)`,dateFormatIso:`ISO (JJJJ-MM-TT)`,timeFormat:`Zeitformat`,timeFormat12:`12-Stunden (3:30 PM)`,timeFormat24:`24-Stunden (15:30)`,defaultPrinter:`Standarddrucker`,defaultPrinterDescription:`Diesen Drucker für Uploads, Nachdrucke und andere Vorgänge vorauswählen.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Nutze das Seitenleisten-Layout, um Elemente neu anzuordnen, Sichtbarkeit zurückzusetzen und benutzerdefinierte Links zu verwalten.`,setDefault:`Standard setzen`,sidebarOrderSetDefaultHint:`Standard setzen übernimmt die aktuelle Menüreihenfolge für Benutzer, die ihre noch nicht angepasst haben.`,sidebarDefaultSet:`Standard-Menüreihenfolge wurde festgelegt.`,sidebarDefaultCleared:`Standard-Menüreihenfolge gelöscht.`,sidebarDefaultFailed:`Festlegen der Standard-Menüreihenfolge fehlgeschlagen.`,reset:`Zurücksetzen`,darkMode:`Dunkelmodus`,lightMode:`Hellmodus`,active:`(aktiv)`,background:`Hintergrund`,accent:`Akzent`,style:`Stil`,bgNeutral:`Neutral`,bgWarm:`Warm`,bgCool:`Kühl`,bgOled:`OLED Schwarz`,bgSlate:`Schieferblau`,bgForest:`Waldgrün`,accentGreen:`Grün`,accentTeal:`Türkis`,accentBlue:`Blau`,accentOrange:`Orange`,accentPurple:`Lila`,accentRed:`Rot`,styleClassic:`Klassisch`,styleGlow:`Leuchtend`,styleVibrant:`Lebendig`,themeToggleHint:`Zwischen Dunkel-, Hell- und Systemmodus mit dem Symbol in der Seitenleiste wechseln.`,progressInTitle:`Druckfortschritt im Tab`,progressInTitleDescription:`Zeigt den Prozentsatz des aktiven Drucks und einen Fortschrittsring im Browser-Tab an.`,autoArchivePrints:`Drucke automatisch archivieren`,autoArchiveDescription:`3MF-Dateien automatisch speichern, wenn Drucke abgeschlossen sind`,saveThumbnailsDescription:`Vorschaubilder aus 3MF-Dateien extrahieren und speichern`,captureFinishPhotoDescription:`Foto von der Druckerkamera aufnehmen, wenn der Druck abgeschlossen ist. Bambuddy zeichnet während des Drucks einen kurzen Zeitraffer auf, damit das Foto aus dem Moment vor dem Absenken der Druckplatte stammen kann. Die Zeitraffer-Datei bleibt erhalten, wenn du den Zeitraffer für diesen Druck aktiviert hast, andernfalls wird sie nach Aufnahme des Fotos automatisch gelöscht.`,finishPhotoRestorePlate:`Druckplatte für Abschlussfoto anheben`,finishPhotoRestorePlateDescription:`Der Drucker senkt die Druckplatte am Druckende um etwa 100 mm ab, wodurch der fertige Druck unterhalb des Kamerabildausschnitts liegt. Bambuddy hebt sie wieder bis knapp über die zuletzt gedruckte Schicht an, nimmt das Foto auf und senkt sie danach wieder ab. Wird übersprungen, wenn die Druckhöhe unbekannt ist oder ein weiterer Auftrag in der Warteschlange steht.`,ffmpegNotInstalled:`ffmpeg nicht installiert`,ffmpegRequired:`Kameraaufnahme benötigt ffmpeg. Installieren über <brew>brew install ffmpeg</brew> (macOS) oder <apt>apt install ffmpeg</apt> (Linux).`,camera:`Kamera`,cameraViewMode:`Kamera-Ansichtsmodus`,cameraOverlayDescription:`Kamera öffnet sich als größenveränderbares Overlay auf dem Hauptbildschirm`,cameraWindowDescription:`Kamera öffnet sich in einem separaten Browserfenster`,externalCamerasDescription:`Externe Kameras konfigurieren, um die eingebaute Druckerkamera zu ersetzen. Unterstützt MJPEG-Streams, RTSP, HTTP-Snapshots und USB-Kameras (V4L2). Wenn aktiviert, wird die externe Kamera für Live-Ansicht und Abschlussfotos verwendet.`,cameraPlaceholderUsb:`Gerätepfad (/dev/video0)`,cameraPlaceholderUrl:`Kamera-URL (rtsp://... oder http://...)`,cameraTypeMjpeg:`MJPEG-Stream`,cameraTypeRtsp:`RTSP-Stream`,cameraTypeSnapshot:`HTTP-Snapshot`,cameraTypeUsb:`USB-Kamera (V4L2)`,cameraSnapshotUrl:`Snapshot-URL (optional)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`URL für Einzelbildaufnahmen — wird für Benachrichtigungs-Vorschaubilder, Abschlussfotos, Schicht-Zeitraffer und Plattenerkennung verwendet. Zeitraffer und Plattenerkennung benötigen jeweils eigene drucker-spezifische Schalter — diese URL ist nur die Bildquelle, die sie verwenden, wenn sie aktiv sind. Leer lassen, um Bilder aus dem oben konfigurierten Live-Stream zu verwenden. Nützlich für go2rtc (/api/frame.jpeg) und IP-Kameras mit dediziertem Snapshot-Endpunkt.`,cameraRotation:`Drehung`,test:`Testen`,connected:`Verbunden`,disconnected:`Getrennt`,currency:`Währung`,defaultFilamentCost:`Standard-Filamentkosten (pro kg)`,electricityCost:`Stromkosten pro kWh`,energyDisplayMode:`Energieanzeige-Modus`,energyModePrintDescription:`Dashboard zeigt Summe der während Drucken verbrauchten Energie`,energyModeTotalDescription:`Dashboard zeigt Gesamtenergie der Smart Plugs`,fileManager:`Dateimanager`,createArchiveEntry:`Archiveintrag beim Drucken erstellen`,createArchiveEntryDescription:`Beim Drucken aus dem Dateimanager optional einen Archiveintrag erstellen`,lowDiskSpaceWarning:`Warnung bei wenig Speicherplatz`,lowDiskSpaceDescription:`Warnung anzeigen, wenn freier Speicherplatz unter diesen Schwellenwert fällt`,printerFirmware:`Drucker-Firmware`,checkFirmwareDescription:`Nach Firmware-Updates von Bambu Lab suchen`,bambuddySoftware:`Bambuddy-Software`,autoCheckDescription:`Automatisch beim Start nach neuen Versionen suchen`,checkNow:`Jetzt prüfen`,updateAvailableVersion:`Update verfügbar: v{{version}}`,releaseNotes:`Versionshinweise`,updateViaDocker:`Update über Docker Compose:`,composeDirectory:`Compose-Verzeichnis`,composeDirectoryHint:`Verzeichnis, in dem deine docker-compose.yml liegt. Leer lassen, um das cd wegzulassen.`,copyUpdateCommand:`Update-Befehl kopieren`,updateViaHomeAssistant:`Updates werden vom Home Assistant Supervisor verwaltet. Öffne Einstellungen → Add-ons → Bambuddy in Home Assistant, um die neue Version zu installieren.`,updateViaWindowsInstaller:`Windows-Installationen werden durch erneutes Ausführen des Installers aktualisiert. Lade die neue Version unten herunter — deine Daten, Einstellungen und Drucker bleiben erhalten.`,downloadWindowsInstaller:`Installer für v{{version}} herunterladen`,installUpdate:`Update installieren`,latestVersionRunning:`Sie verwenden die neueste Version`,failedToCheckUpdates:`Update-Prüfung fehlgeschlagen: {{error}}`,backupRestore:`Sicherung & Wiederherstellung`,backupRestoreDescription:`Einstellungen exportieren/importieren und GitHub-Backup konfigurieren`,goToBackup:`Zur Sicherung`,externalUrl:`Externe URL`,externalUrlDescription:`Die externe URL, unter der Bambuddy erreichbar ist. Wird für Benachrichtigungsbilder und externe Integrationen verwendet.`,bambuddyUrl:`Bambuddy-URL`,externalUrlHint:`Protokoll und Port angeben (z.B. http://192.168.1.100:8000)`,ftpRetry:`FTP-Wiederholung`,ftpRetryDescription:`FTP-Operationen bei unzuverlässigem Drucker-WLAN wiederholen. Gilt für 3MF-Downloads, Druck-Uploads, Zeitraffer-Downloads und Firmware-Updates.`,autoRetryDescription:`Fehlgeschlagene FTP-Operationen automatisch wiederholen`,retryAttempts:`Wiederholungsversuche`,retryDelay:`Wiederholungsverzögerung`,connectionTimeout:`Verbindungs-Timeout`,time_one:`{{count}} Mal`,time_other:`{{count}} Mal`,second_one:`{{count}} Sekunde`,second_other:`{{count}} Sekunden`,nSeconds:`{{count}} Sekunden`,increaseForWeakWifi:`Erhöhen für Drucker mit schwachem WLAN`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Mit Home Assistant verbinden, um Smart Plugs über die HA REST-API zu steuern. Unterstützt Switch-, Light-, Input_Boolean- und Script-Entitäten.`,homeAssistantUrl:`Home Assistant URL`,longLivedAccessToken:`Langlebiges Zugriffstoken`,haTokenHint:`Token in HA erstellen: Profil → Langlebige Zugriffstoken → Token erstellen`,connectionSuccessful:`Verbindung erfolgreich`,connectionFailed:`Verbindung fehlgeschlagen`,haConnectionSuccess:`Erfolgreich mit Home Assistant verbunden.`,haConnectionFailed:`Verbindung zu Home Assistant fehlgeschlagen.`,mqttPublishing:`MQTT-Veröffentlichung`,mqttDescription:`BamBuddy-Ereignisse an einen externen MQTT-Broker zur Integration mit Node-RED, Home Assistant und anderen Automatisierungssystemen veröffentlichen.`,mqttEnableDescription:`Ereignisse an externen MQTT-Broker veröffentlichen`,brokerHostname:`Broker-Hostname`,port:`Port`,usernameOptional:`Benutzername (optional)`,passwordOptional:`Passwort (optional)`,topicPrefix:`Topic-Präfix`,topicPrefixHint:`Topics werden sein: {{prefix}}/printers/<serial>/status, etc.`,prometheusMetrics:`Prometheus-Metriken`,prometheusEndpointDescription:`Druckermetriken unter <code>/api/v1/metrics</code> für Prometheus/Grafana-Überwachung bereitstellen.`,bearerTokenOptional:`Bearer-Token (optional)`,bearerTokenHint:`Wenn gesetzt, müssen Anfragen <code>Authorization: Bearer <token></code> enthalten`,metricsConnectionStatus:`Verbindungsstatus`,metricsPrinterState:`Druckerstatus (idle/printing/etc)`,metricsPrintProgress:`Druckfortschritt 0-100%`,metricsBedTemp:`Betttemperatur`,metricsNozzleTemp:`Düsentemperatur`,metricsPrintsTotal:`Gesamtdrucke nach Ergebnis`,metricsMore:`...und mehr (Schichten, Lüfter, Warteschlange, Filamentverbrauch)`,smartPlugsDescription:`Smart Plugs (Tasmota oder Home Assistant) verbinden, um Stromsteuerung zu automatisieren und Energieverbrauch für Ihre Drucker zu verfolgen.`,allOn:`Alle Ein`,allOff:`Alle Aus`,addSmartPlug:`Smart Plug hinzufügen`,energySummary:`Energieübersicht`,currentPower:`Aktuelle Leistung`,plugsOnline:`{{reachable}}/{{total}} Plugs online`,today:`Heute`,yesterday:`Gestern`,total:`Gesamt`,enablePlugsForSummary:`Plugs aktivieren, um Energieübersicht zu sehen`,addNotificationProvider:`Hinzufügen`,systemBadge:`(System)`,creating:`Erstellen...`,changing:`Ändern...`,deleteUserAndItems:`Benutzer UND dessen Elemente löschen`,deleteUserKeepItems:`Benutzer löschen, Elemente behalten (werden herrenlos)`,ok:`OK`,twoFa:{totpTitle:`Authenticator-App (TOTP)`,totpDesc:`Verwende eine Authenticator-App wie Google Authenticator, Aegis oder Authy.`,emailOtpTitle:`E-Mail OTP`,emailOtpDesc:`Sende einen Einmalcode an {{email}} beim Einloggen.`,emailOtpNoEmail:`Füge eine E-Mail-Adresse zu deinem Konto hinzu, um diese Methode zu aktivieren.`,addEmailFirst:`Dein Konto hat keine E-Mail-Adresse. Bitte einen Administrator, eine hinzuzufügen.`,setupTotp:`Authenticator-App einrichten`,setupAuthApp:`Authenticator-App einrichten`,setupInstructions:`Scanne den QR-Code mit deiner Authenticator-App und bestätige mit einem Code.`,manualEntry:`Kein Scanner? Gib dieses Secret manuell ein:`,scannedContinue:`Code gescannt — weiter`,enterCodeToConfirm:`Gib den 6-stelligen Code aus deiner Authenticator-App ein, um die Einrichtung zu bestätigen.`,activate:`Aktivieren`,disableTotp:`Authenticator deaktivieren`,disableConfirmHint:`Gib einen gültigen TOTP-Code oder einen Backup-Code ein, um den Authenticator zu deaktivieren.`,totpDisabled:`Authenticator-App deaktiviert.`,emailOtpEnabled:`E-Mail OTP aktiviert.`,emailOtpDisabled:`E-Mail OTP deaktiviert.`,smtpRequired:`Bitte konfigurieren und testen Sie zuerst die SMTP-Einstellungen.`,invalidCode:`Ungültiger Code. Bitte erneut versuchen.`,enableEmailOtp:`E-Mail OTP aktivieren`,disableEmailOtp:`E-Mail OTP deaktivieren`,emailSetupEnterCode:`Ein Bestätigungscode wurde an Ihre E-Mail-Adresse gesendet. Geben Sie ihn unten ein, um zu bestätigen, dass Ihnen dieses Postfach gehört.`,verifyAndEnable:`Verifizieren & Aktivieren`,emailDisablePasswordHint:`Geben Sie Ihr Kontopasswort ein, um die Deaktivierung des E-Mail OTP zu bestätigen.`,passwordPlaceholder:`Passwort eingeben`,backupCodesTitle:`Backup-Codes sichern`,backupCodesWarning:`Speichere diese Codes sicher. Jeder Code kann nur einmal verwendet werden und wird nicht erneut angezeigt.`,backupCodesRemaining:`{{count}} Backup-Codes verbleibend`,savedCodes:`Codes gespeichert`,regenBackup:`Backup-Codes neu generieren`,regenBackupHint:`Gib deinen aktuellen TOTP-Code ein, um 10 neue Backup-Codes zu generieren. Alle bestehenden Codes werden ungültig.`,newBackupCodes:`Neue Backup-Codes`,linkedAccounts:`Verknüpfte SSO-Konten`,linkedAccountsDesc:`Diese externen Identitätsanbieter sind mit deinem Konto verknüpft.`,oidcUnlinked:`Konto getrennt.`},sessionPolicy:{title:`Sitzungsrichtlinie`,description:`Maximale Sitzungsdauer für neue Benutzeranmeldungen. Bereits ausgegebene Token behalten ihren ursprünglichen Ablauf.`,preset24h:`24 Stunden`,preset7d:`7 Tage`,preset30d:`30 Tage`,customHoursLabel:`Individuelle Sitzungsdauer in Stunden`,hoursSuffix:`Stunden`,warning:`Längere Sitzungen reduzieren den automatischen Abmeldeschutz. Nur für vertrauenswürdige Einzelnutzer-Installationen empfohlen.`},oidc:{title:`SSO / OIDC-Anbieter`,desc:`Konfiguriere OpenID Connect-Anbieter für Single Sign-On.`,addProvider:`Anbieter hinzufügen`,newProvider:`Neuer Anbieter`,empty:`Noch keine OIDC-Anbieter konfiguriert.`,created:`Anbieter erstellt.`,updated:`Anbieter aktualisiert.`,deleted:`Anbieter gelöscht.`,refreshIcon:`Icon neu laden`,removeIcon:`Icon entfernen`,iconRefreshed:`Icon aktualisiert.`,iconRemoved:`Icon entfernt.`,iconFetchFailed:`Icon konnte von der Anbieter-URL nicht geladen werden.`,deleteTitle:`Anbieter löschen`,deleteMessage:`"{{name}}" löschen? Alle verknüpften Benutzerkonten werden getrennt.`,form:{name:`Anzeigename`,issuerUrl:`Aussteller-URL`,clientId:`Client-ID`,clientSecret:`Client-Secret`,scopes:`Bereiche`,iconUrl:`Symbol-URL (optional)`,enabled:`Aktiviert`,autoCreate:`Benutzer automatisch anlegen`,autoCreateDesc:`Erstellt beim ersten Login automatisch ein lokales Konto.`,autoLink:`Bestehende Konten automatisch verknüpfen`,autoLinkDesc:`Verknüpft beim ersten Login vorhandene lokale Konten anhand der E-Mail-Adresse.`,secretHint:`leer lassen zum Beibehalten`,secretPlaceholder:`neues Secret`,emailClaim:`E-Mail-Claim`,emailClaimDesc:`JWT-Claim für die E-Mail-Identität. Für Azure Entra ID 'preferred_username' oder 'upn' verwenden (sendet kein email_verified). Nur vertrauenswürdige Claim-Namen verwenden.`,emailClaimPlaceholder:`E-Mail`,emailClaimCustomClaimAutoLinkWarning:`Benutzerdefinierte Claims sind für die Auto-Verknüpfung nur sicher, wenn der Wert vom Mandanten verwaltet wird (z. B. Azure Entra ID upn / preferred_username). Aktiviere Auto-Verknüpfung nicht, wenn dein IdP Benutzern erlaubt, diesen Claim selbst zu setzen.`,requireEmailVerified:`E-Mail-Verifizierung erforderlich`,requireEmailVerifiedDesc:`E-Mail-Claim nur akzeptieren, wenn der Provider ihn als verifiziert markiert.`,requireEmailVerifiedWarning:`Warnung: E-Mail wird auch ohne Verifizierung akzeptiert. Nur bei vertrauenswürdigen Providern verwenden.`,requireEmailVerifiedAutoLink:`Auto-Verknüpfung zuerst deaktivieren, um diese Einstellung zu ändern.`,defaultGroup:`Standardgruppe`,defaultGroupDesc:`Gruppe, der automatisch erstellte Benutzer zugewiesen werden. Fallback auf Viewers, wenn nicht gesetzt.`,defaultGroupViewersFallback:`Viewers (Standard)`,autologin:`Automatische Anmeldung`,autologinDesc:`Nicht angemeldete Besucher direkt zu diesem Anbieter weiterleiten. Diese Option kann nur für einen Anbieter aktiv sein.`}},encryption:{title:`MFA-Verschlüsselungsstatus`,enabledFromEnv:`At-Rest-Verschlüsselung aktiv (Schlüssel aus Umgebungsvariable MFA_ENCRYPTION_KEY)`,enabledFromFile:`At-Rest-Verschlüsselung aktiv (Schlüssel aus dem Datenverzeichnis geladen)`,enabledGenerated:`At-Rest-Verschlüsselung aktiv mit automatisch generiertem Schlüssel`,notConfigured:`At-Rest-Verschlüsselung nicht konfiguriert`,notConfiguredDesc:`TOTP-Geheimnisse und OIDC-Client-Secrets werden im Klartext gespeichert. Setze MFA_ENCRYPTION_KEY oder starte Bambuddy mit beschreibbarem Datenverzeichnis neu, damit ein Schlüssel automatisch erzeugt wird.`,allEncrypted:`Alle MFA-Geheimnisse sind verschlüsselt gespeichert.`,legacyRowsLabel:`Klartext-Zeilen (Altbestand)`,encryptedRowsLabel:`Verschlüsselte Zeilen`,legacyRowsWarning:`{{count}} Klartext-Zeile(n) erkannt. Den OIDC-Provider neu speichern oder den Authenticator des Benutzers neu einrichten, um die Daten verschlüsselt abzulegen.`,backupHint:`Der automatisch erzeugte Schlüssel liegt unter DATA_DIR/.mfa_encryption_key und wird in lokalen Backup-ZIPs mitgesichert. Backups sicher aufbewahren oder MFA_ENCRYPTION_KEY explizit setzen.`,decryptionBrokenTitle:`Verschlüsselungsschlüssel fehlt`,decryptionBrokenError:`{{count}} verschlüsselte Datensätze können nicht entschlüsselt werden, weil der Schlüssel nicht mehr verfügbar ist. Den vorherigen MFA_ENCRYPTION_KEY oder DATA_DIR/.mfa_encryption_key wiederherstellen.`,migrationErrorWarning:`{{count}} Legacy-Eintrag/Einträge konnten beim Start nicht verschlüsselt werden. Prüfen Sie die Server-Logs und starten Sie Bambuddy neu.`},pipelineLimits:{title:`Slicer-Pipeline-Limits`,maxCopiesLabel:`Max. Kopien pro Lauf`,maxCopiesDesc:`Obergrenze für die Anzahl an Kopien, die Operatoren beim Ausführen einer Pipeline anfordern können. Serverseitige Obergrenze ist 1000.`},pipelines:{title:`Slicer-Pipelines`,subtitle:`Wiederverwendbare Preset-Bundles (Drucker + Prozess + Filamente + Druckplatte). Speichere eines aus dem Slice-Dialog und wende es beim nächsten Datei-Slice mit einem Klick an.`,loading:`Pipelines werden geladen…`,loadError:`Pipelines konnten nicht geladen werden.`,confirmDelete:`Diese Pipeline löschen? Das kann nicht rückgängig gemacht werden.`,staleWarning:`Eines oder mehrere referenzierte Presets existieren nicht mehr. Speichere diese Pipeline erneut aus dem Slice-Dialog, um sie zu reparieren.`,empty:{title:`Noch keine Pipelines.`,howto:`Öffne den Slice-Dialog für eine beliebige Datei, wähle Drucker / Prozess / Filamente / Druckplatte und klicke „Als Pipeline speichern“. Deine gespeicherten Pipelines erscheinen hier.`},field:{name:`Pipeline-Name`,description:`Beschreibung`,targetPrinter:`Zieldrucker`,noTarget:`— Kein Ziel —`,targetKind:`Zielart`,targetKindSpecific:`Spezifischer Drucker`,targetKindClass:`Druckerklasse`,targetModelClass:`Druckermodell`,fanoutStrategy:`Verteilungsstrategie`,fanout:{max_parallel:`Max parallel — auf alle verfügbaren passenden Drucker verteilen`,round_robin:`Reihum — durch geeignete Drucker rotieren`,fill_one_first:`Erst einen füllen — alle Kopien an einen Drucker binden`},fanoutShort:{max_parallel:`parallel`,round_robin:`Reihum`,fill_one_first:`einer zuerst`}},action:{save:`Speichern`,cancel:`Abbrechen`,rename:`Umbenennen`,delete:`Löschen`},slot:{printer:`Drucker`,process:`Prozess`,filament:`Filament`,filamentN:`Filament {{n}}`,filamentAll:`Alle {{n}} Slots`,bed:`Druckplatte`},group:{profiles:`Profile`,filaments:`Filamente`},searchPlaceholder:`Pipelines durchsuchen…`,filterTargetType:`Nach Zielart filtern`,filterTarget:`Nach Ziel filtern`,filter:{all:`Alle Ziele`,noTarget:`Kein Ziel festgelegt`,count:`{{shown}} / {{total}}`,noMatches:`Keine Pipelines entsprechen den aktuellen Filtern.`},toast:{saved:`Pipeline gespeichert`,saveFailed:`Speichern fehlgeschlagen`,deleted:`Pipeline gelöscht`,deleteFailed:`Löschen fehlgeschlagen`},noTargetHint:`Lege einen Zieldrucker fest, um diese auszuführen`,noTargetWarning:`Lege einen Zieldrucker fest, bevor du diese Pipeline ausführst.`,runs:{lastRun:`Letzter Lauf`,status:{queued:`in Warteschlange`,slicing:`wird geschnitten`,dispatching:`wird gesendet`,in_progress:`druckt`,completed:`abgeschlossen`,failed:`fehlgeschlagen`,partial_failure:`teilweise fehlgeschlagen`,cancelled:`abgebrochen`}}}},notification:{printStarted:{title:`Druck gestartet`,body:`{{printer}}: {{filename}} wird gedruckt`},printCompleted:{title:`Druck abgeschlossen`,body:`{{printer}}: {{filename}} erfolgreich abgeschlossen`},printFailed:{title:`Druck fehlgeschlagen`,body:`{{printer}}: {{filename}} ist fehlgeschlagen`},printStopped:{title:`Druck gestoppt`,body:`{{printer}}: {{filename}} wurde gestoppt`},printProgress:{title:`Druckfortschritt`,body:`{{printer}}: {{filename}} ist zu {{percent}}% abgeschlossen`},printerOffline:{title:`Drucker offline`,body:`{{printer}} ist offline`},printerError:{title:`Druckerfehler`,body:`{{printer}} – {{error}}`},filamentLow:{title:`Filament niedrig`,body:`{{printer}}: Filament geht zur Neige`},maintenanceDue:{title:`Wartung fällig`,body:`{{printer}}: {{items}} benötigen Aufmerksamkeit`}},errors:{generic:`Etwas ist schiefgelaufen`,networkError:`Netzwerkfehler. Bitte überprüfen Sie Ihre Verbindung.`,notFound:`Nicht gefunden`,unauthorized:`Nicht autorisiert`,serverError:`Serverfehler`,validationError:`Bitte überprüfen Sie Ihre Eingabe`,printerConnectionFailed:`Verbindung zum Drucker fehlgeschlagen`,saveFailed:`Speichern fehlgeschlagen`,deleteFailed:`Löschen fehlgeschlagen`,loadFailed:`Laden der Daten fehlgeschlagen`},hmsErrors:{title:`Fehler - {{name}}`,noErrors:`Keine Fehler`,viewOnWiki:`Im Bambu Lab Wiki ansehen`,mqttVerifyFailedRemedy:`Aktiviere den Entwicklermodus am Drucker, starte den Drucker neu und starte den Auftrag dann erneut.`,unknownCode:`Unbekannter HMS-Code — Details siehe Bambu Lab Wiki.`,clearInstructions:`Löschen Sie die Fehler am Drucker, um sie hier zu entfernen.`,clearErrors:`Fehler löschen`,clearSuccess:`HMS-Fehler gelöscht`,clearFailed:`HMS-Fehler konnten nicht gelöscht werden`,actionSuccess:`Aktion an Drucker gesendet`,actionFailed:`Aktion konnte nicht gesendet werden`,runoutExpectedSlot:`Das Filament in {{ranOut}} ist aufgebraucht. Der Drucker wartet jetzt auf kompatibles Filament in {{expected}}. Legen Sie eine Spule in {{expected}} ein und wählen Sie dann Wiederholen.`,runoutExpectedSlotOnly:`Der Drucker wartet auf kompatibles Filament in {{expected}}. Legen Sie dort eine Spule ein und wählen Sie dann Wiederholen.`,runoutSlotUnknown:`Das Filament ist aufgebraucht und der Druck ist pausiert. Bambuddy konnte nicht ermitteln, welchen Slot der Drucker jetzt erwartet — prüfen Sie am Druckerdisplay, welcher Slot angefordert wird.`,actions:{RESUME_PRINTING:`Druck fortsetzen`,RESUME_PRINTING_DEFECTS:`Fortsetzen (Mängel akzeptabel)`,RESUME_PRINTING_PROBELM_SOLVED:`Fortsetzen (Problem gelöst)`,STOP_PRINTING:`Druck stoppen`,CHECK_ASSISTANT:`Assistent öffnen`,FILAMENT_EXTRUDED:`Filament extrudiert, weiter`,RETRY_FILAMENT_EXTRUDED:`Noch nicht extrudiert, erneut`,CONTINUE:`Fertig, weiter`,LOAD_VIRTUAL_TRAY:`Filament laden`,OK_BUTTON:`OK`,FILAMENT_LOAD_RESUME:`Filament geladen, fortsetzen`,JUMP_TO_LIVEVIEW:`Live-Ansicht öffnen`,NO_REMINDER_NEXT_TIME:`Nicht mehr erinnern`,REFRESH_NOZZLE:`Erneut prüfen`,IGNORE_NO_REMINDER_NEXT_TIME:`Ignorieren und nicht mehr erinnern`,IGNORE_RESUME:`Ignorieren und fortsetzen`,PROBLEM_SOLVED_RESUME:`Problem gelöst, fortsetzen`,TURN_OFF_FIRE_ALARM:`Verstanden, Brandalarm ausschalten`,RETRY_PROBLEM_SOLVED:`Erneut versuchen (Problem gelöst)`,CANCLE:`Abbrechen`,STOP_DRYING:`Trocknen stoppen`,PROCEED:`Fortfahren`,OK_JUMP_RACK:`OK`,ABORT:`Abbrechen`,DISABLE_PURIFICATION:`Luftreinigung für diesen Druck deaktivieren`,DONT_REMIND_NEXT_TIME:`Nicht mehr erinnern`,DBL_CHECK_CANCEL:`Abbrechen`,DBL_CHECK_DONE:`Fertig`,DBL_CHECK_RETRY:`Erneut versuchen`,DBL_CHECK_RESUME:`Fortsetzen`,DBL_CHECK_OK:`Bestätigen`,REMOVE_CLOSE_BTN:`Schließen`}},mqttDebug:{title:`MQTT-Debug-Protokoll`,searchPlaceholder:`Topic oder Payload suchen...`,noMessages:`Noch keine Nachrichten protokolliert`,startLoggingHint:`Klicken Sie auf "Protokollierung starten", um MQTT-Nachrichten aufzuzeichnen`,noMessagesMatch:`Keine Nachrichten entsprechen Ihrem Filter`,adjustFilterHint:`Versuchen Sie, Ihre Such- oder Filterkriterien anzupassen`,incoming:`Eingehend`,outgoing:`Ausgehend`,loggingStopped:`Protokollierung gestoppt`,loggingActive:`Protokollierung aktiv - Nachrichten werden automatisch aktualisiert`,startLogging:`Protokollierung starten`,stopLogging:`Protokollierung stoppen`,clearLog:`Protokoll löschen`,topic:`Thema`,timestamp:`Zeitstempel`,direction:`Richtung`,all:`Alle`},printerFiles:{zipStarted_one:`ZIP-Download für {{count}} Datei gestartet`,zipStarted_other:`ZIP-Download für {{count}} Dateien gestartet`,zipPartial:`ZIP-Download mit {{successful}} von {{total}} Dateien gestartet; die übrigen konnten nicht abgerufen werden`,downloadFailed:`Download fehlgeschlagen: {{error}}`,unknownError:`Unbekannter Fehler`,shiftSelectHint:`Umschalttaste gedrückt halten, um einen Bereich auszuwählen`,selectFile:`{{name}} auswählen`,deselectFile:`Auswahl von {{name}} aufheben`,title:`Dateimanager`,storageUsed:`Belegt:`,storageFree:`Frei:`,filterPlaceholder:`Dateien filtern...`,deleteButton:`Löschen`,deleteFiles:`{{count}} Dateien löschen`,deleteFileConfirm:`"{{name}}" löschen? Dies kann nicht rückgängig gemacht werden.`,deleteFilesConfirm:`{{count}} ausgewählte Dateien löschen? Dies kann nicht rückgängig gemacht werden.`,noFiles:`Keine Dateien auf dem Drucker`,printerUnavailable:`Der Dateidienst des Druckers ist nicht erreichbar. Versuchen Sie es erneut, wenn der Drucker verfügbar ist.`,loadingFiles:`Dateien werden geladen...`,failedToLoad:`Dateien konnten nicht geladen werden`,toast:{filesDeleted:`{{count}} Datei(en) gelöscht`,deleteFailed:`Löschen fehlgeschlagen: {{error}}`}},confirm:{delete:`Möchten Sie dies wirklich löschen?`,unsavedChanges:`Sie haben ungespeicherte Änderungen. Möchten Sie wirklich verlassen?`,clearQueue:`Möchten Sie die Warteschlange wirklich leeren?`},login:{title:`Bambuddy Anmeldung`,subtitle:`Melden Sie sich bei Ihrem Konto an`,username:`Benutzername`,usernamePlaceholder:`Benutzername eingeben`,usernameOrEmail:`Benutzername oder E-Mail`,usernameOrEmailPlaceholder:`Benutzername oder @ E-Mail`,password:`Passwort`,passwordPlaceholder:`Passwort eingeben`,signIn:`Anmelden`,signingIn:`Anmeldung läuft...`,rememberMe:`Angemeldet bleiben`,forgotPassword:`Passwort vergessen?`,autologinFailed:`Automatische SSO-Anmeldung fehlgeschlagen. Bitte wählen Sie unten einen Anbieter.`,localDisabledNotice:`Lokale Anmeldung ist deaktiviert. Bitte verwenden Sie einen der SSO-Anbieter unten.`,loginSuccess:`Erfolgreich angemeldet`,loginFailed:`Anmeldung fehlgeschlagen`,enterCredentials:`Bitte Benutzername und Passwort eingeben`,enterEmail:`Bitte geben Sie Ihre E-Mail-Adresse ein`,oidcLoginFailed:`OIDC-Anmeldung fehlgeschlagen`,oidcErrors:{providerError:`Der Identity-Provider hat einen Fehler zurückgegeben`,missingParameters:`Dem OIDC-Callback fehlen erforderliche Parameter`,invalidState:`OIDC-State ist ungültig oder wurde bereits verwendet`,stateExpired:`OIDC-Sitzung abgelaufen — bitte erneut versuchen`,providerNotFound:`OIDC-Provider nicht gefunden`,discoveryFailed:`OIDC-Discovery-Dokument konnte nicht abgerufen werden`,invalidDiscovery:`OIDC-Discovery-Dokument ist ungültig`,networkError:`Netzwerkfehler beim OIDC-Token-Austausch`,badResponse:`Unerwartete Antwort beim OIDC-Token-Austausch`,noIdToken:`OIDC-Provider hat kein ID-Token zurückgegeben`,validationFailed:`OIDC-Token-Validierung fehlgeschlagen`,nonceMismatch:`OIDC-Nonce stimmt nicht überein — möglicher Replay-Angriff`,missingSubClaim:`OIDC-Token enthält keinen Sub-Claim`,noLinkedAccount:`Kein lokales Konto mit dieser OIDC-Identität verknüpft`,accountInactive:`Ihr Konto ist inaktiv`,userResolutionFailed:`Ihr Konto konnte nicht aufgelöst werden`,internalError:`Interner Fehler beim OIDC-Login`,tokenExchangeFailed:`OIDC-Token-Austausch fehlgeschlagen`},forgotPasswordTitle:`Passwort vergessen`,forgotPasswordMessage:`Wenn Sie Ihr Passwort vergessen haben, wenden Sie sich bitte an Ihren Systemadministrator.`,forgotPasswordEmailMessage:`Geben Sie Ihre E-Mail-Adresse ein und wir senden Ihnen ein neues Passwort.`,emailAddress:`E-Mail-Adresse`,emailPlaceholder:`ihre.email@beispiel.de`,cancel:`Abbrechen`,sending:`Wird gesendet...`,sendResetEmail:`Zurücksetzungs-E-Mail senden`,howToReset:`So setzen Sie Ihr Passwort zurück:`,resetStep1:`Kontaktieren Sie Ihren Bambuddy-Administrator`,resetStep2:`Bitten Sie ihn, Ihr Passwort in der Benutzerverwaltung zurückzusetzen`,resetStep3:`Er kann ein neues temporäres Passwort für Sie festlegen`,resetStep4:`Melden Sie sich mit dem neuen Passwort an und ändern Sie es in den Einstellungen`,gotIt:`Verstanden`,resetPassword:{title:`Neues Passwort festlegen`,subtitle:`Geben Sie unten Ihr neues Passwort ein und bestätigen Sie es.`,newPassword:`Neues Passwort`,newPasswordPlaceholder:`Mindestens 8 Zeichen`,confirmPassword:`Passwort bestätigen`,confirmPasswordPlaceholder:`Neues Passwort wiederholen`,saving:`Wird gespeichert…`,submit:`Neues Passwort festlegen`,backToLogin:`Zurück zur Anmeldung`,passwordsDoNotMatch:`Passwörter stimmen nicht überein`,passwordTooShort:`Passwort muss mindestens 8 Zeichen lang sein`,resetFailed:`Passwort zurücksetzen fehlgeschlagen. Der Link ist möglicherweise abgelaufen.`},twoFA:{title:`Zwei-Faktor-Authentifizierung`,subtitle:`Ihr Konto ist mit 2FA geschützt. Geben Sie unten den Bestätigungscode ein.`,methodAuthenticator:`Authenticator-App`,methodEmail:`E-Mail-Code`,methodBackup:`Wiederherstellungscode`,instructionsTotp:`Öffnen Sie Ihre Authenticator-App und geben Sie den 6-stelligen Code für Bambuddy ein.`,instructionsEmail:`Ein 6-stelliger Code wurde an Ihre E-Mail-Adresse gesendet. Er ist 10 Minuten gültig.`,instructionsEmailNotSent:`Klicken Sie unten, um einen Bestätigungscode per E-Mail zu erhalten.`,instructionsBackup:`Geben Sie einen Ihrer 8-stelligen Wiederherstellungscodes ein. Jeder Code kann nur einmal verwendet werden.`,sendCodeButton:`Code per E-Mail senden`,sendingCode:`Wird gesendet...`,resendCode:`Code erneut senden`,codeLabel:`Bestätigungscode`,backupCodeLabel:`Wiederherstellungscode`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Bestätigen`,verifyingButton:`Wird überprüft...`,backToLogin:`← Zurück zur Anmeldung`,orContinueWith:`oder anmelden mit`,signInWith:`Anmelden mit {{provider}}`,enterCode:`Bitte geben Sie den Bestätigungscode ein`,sendCodeFailed:`Bestätigungscode konnte nicht gesendet werden`,invalidCode:`Ungültiger Code. Bitte erneut versuchen.`}},setup:{title:`Bambuddy Einrichtung`,subtitle:`Konfigurieren Sie die Authentifizierung für Ihre Bambuddy-Instanz`,enableAuth:`Authentifizierung aktivieren`,adminAccount:`Admin-Konto`,adminAccountDesc:`Wenn bereits Admin-Benutzer existieren, wird die Authentifizierung mit den vorhandenen Admin-Konten aktiviert. Lassen Sie die Felder unten leer, um vorhandene Admins zu verwenden, oder geben Sie neue Anmeldedaten ein, um einen neuen Admin-Benutzer zu erstellen.`,adminUsername:`Admin-Benutzername`,adminPassword:`Admin-Passwort`,optionalIfAdminExists:`(optional, wenn Admin-Benutzer existieren)`,adminUsernamePlaceholder:`Admin-Benutzernamen eingeben (optional)`,adminPasswordPlaceholder:`Admin-Passwort eingeben (optional)`,confirmPassword:`Passwort bestätigen`,confirmPasswordPlaceholder:`Admin-Passwort bestätigen`,settingUp:`Einrichtung läuft...`,completeSetup:`Einrichtung abschließen`,toast:{authEnabledAdminCreated:`Authentifizierung aktiviert und Admin-Benutzer erstellt`,authEnabledExistingAdmins:`Authentifizierung mit vorhandenen Admin-Benutzern aktiviert`,setupCompleted:`Einrichtung abgeschlossen`,enterBothCredentials:`Bitte geben Sie sowohl Admin-Benutzernamen als auch Passwort ein, oder lassen Sie beide leer, um vorhandene Admin-Benutzer zu verwenden`,passwordsDoNotMatch:`Passwörter stimmen nicht überein`,passwordTooShort:`Passwort muss mindestens 6 Zeichen lang sein`}},changePassword:{title:`Passwort ändern`,currentPassword:`Aktuelles Passwort`,currentPasswordPlaceholder:`Aktuelles Passwort eingeben`,newPassword:`Neues Passwort`,newPasswordPlaceholder:`Neues Passwort eingeben (min. 6 Zeichen)`,confirmPassword:`Neues Passwort bestätigen`,confirmPasswordPlaceholder:`Neues Passwort bestätigen`,passwordsDoNotMatch:`Passwörter stimmen nicht überein`,passwordTooShort:`Passwort muss mindestens 6 Zeichen lang sein`,changing:`Wird geändert...`,success:`Passwort erfolgreich geändert`,failed:`Passwortänderung fehlgeschlagen`},plateAlert:{title:`Druck pausiert!`,message:`Objekte auf dem Druckbett erkannt. Der Druck wurde automatisch pausiert. Bitte räumen Sie das Druckbett und setzen Sie den Druck fort.`,understand:`Verstanden`},camera:{title:`Kameraansicht`,invalidPrinterId:`Ungültige Drucker-ID`,live:`Live`,snapshot:`Schnappschuss`,restartStream:`Stream neu starten`,refreshSnapshot:`Schnappschuss aktualisieren`,fullscreen:`Vollbild`,exitFullscreen:`Vollbild beenden`,connectingToCamera:`Verbinde mit Kamera...`,capturingSnapshot:`Schnappschuss wird aufgenommen...`,connectionLost:`Verbindung verloren`,connectionFailed:`Kameraverbindung fehlgeschlagen`,reconnecting:`Neuverbindung in {{countdown}}s... (Versuch {{attempt}}/{{max}})`,reconnectNow:`Jetzt verbinden`,cameraUnavailable:`Kamera nicht verfügbar`,cameraUnavailableDesc:`Stellen Sie sicher, dass der Drucker eingeschaltet und verbunden ist.`,noCamera:`Keine Kamera verfügbar`,retry:`Erneut versuchen`,cameraStream:`Kamera-Stream`,zoomOut:`Verkleinern`,zoomIn:`Vergrößern`,resetZoom:`Zoom zurücksetzen`,recording:`Aufnahme`,startRecording:`Aufnahme starten`,stopRecording:`Aufnahme stoppen`,chamberLight:`Kammerbeleuchtung umschalten`,unavailable:`Kamera nicht verfügbar`,diagnose:{button:`Diagnose`,modalTitle:`Kamera-Diagnose`,running:`Diagnose läuft...`,runFailed:`Diagnose konnte nicht ausgeführt werden: {{error}}`,retry:`Erneut ausführen`,stage:{tcp_reachable:`Netzwerk-Erreichbarkeit`,first_frame:`Bilderfassung`,live_stream_active:`Live-Stream aktiv`},summary:{all_ok:`Kamera funktioniert. Die Diagnose hat alle Phasen erfolgreich abgeschlossen.`,live_stream_active_healthy:`Kamera streamt gerade mit aktuellen Bildern — kein Test nötig.`,printer_unreachable:`Drucker ist nicht erreichbar. Prüfe IP-Adresse, Netzwerkverbindung und ob der Drucker eingeschaltet ist.`,camera_port_closed:`Drucker ist erreichbar, aber der Kamera-Port ist geschlossen. Stelle sicher, dass LAN-Modus und Entwicklermodus in den Druckereinstellungen aktiviert sind.`,no_frame:`Verbindung zur Kamera hergestellt, aber keine Bilder empfangen. Versuche es erneut oder prüfe, ob die Kamera in den Druckereinstellungen aktiviert ist.`,unknown_failure:`Kamera-Diagnose aus unbekanntem Grund fehlgeschlagen. Prüfe das Support-Log für Details.`},meta:{protocol:`Protokoll`,port:`Port`,profile:`Profil`}}},groups:{title:`Gruppenverwaltung`,subtitle:`Berechtigungsgruppen für Zugriffskontrolle verwalten`,backToSettings:`Zurück zu Einstellungen`,createGroup:`Gruppe erstellen`,noPermission:`Sie haben keine Berechtigung, auf diese Seite zuzugreifen.`,system:`System`,noDescription:`Keine Beschreibung`,usersCount:`{{count}} Benutzer`,permissionsCount:`{{count}} Berechtigungen`,edit:`Bearbeiten`,delete:`Löschen`,toast:{created:`Gruppe erfolgreich erstellt`,updated:`Gruppe erfolgreich aktualisiert`,deleted:`Gruppe erfolgreich gelöscht`,enterGroupName:`Bitte geben Sie einen Gruppennamen ein`},modal:{editGroup:`Gruppe bearbeiten`,createGroup:`Gruppe erstellen`,cancel:`Abbrechen`,saving:`Speichern...`,creating:`Erstellen...`,saveChanges:`Änderungen speichern`},form:{groupName:`Gruppenname`,groupNamePlaceholder:`Gruppennamen eingeben`,systemGroupWarning:`Systemgruppennamen können nicht geändert werden`,description:`Beschreibung`,descriptionPlaceholder:`Beschreibung eingeben (optional)`,permissions:`Berechtigungen ({{count}} ausgewählt)`},deleteModal:{title:`Gruppe löschen`,message:`Sind Sie sicher, dass Sie diese Gruppe löschen möchten? Benutzer in dieser Gruppe verlieren diese Berechtigungen.`,confirm:`Gruppe löschen`},editor:{title:`Gruppe bearbeiten`,createTitle:`Gruppe erstellen`,search:`Berechtigungen suchen...`,selectAll:`Alle auswählen`,clearAll:`Alle abwählen`,permissionsSelected:`{{count}} ausgewählt`,noResults:`Keine Berechtigungen entsprechen Ihrer Suche`,websocketHint:`Erforderlich für Live-Aktualisierungen. Ohne diese Berechtigung greift die Oberfläche auf regelmäßiges Abrufen zurück.`}},users:{title:`Benutzerverwaltung`,subtitle:`Benutzer und deren Zugriff auf Ihre Bambuddy-Instanz verwalten`,backToSettings:`Zurück zu Einstellungen`,createUser:`Benutzer erstellen`,noPermission:`Sie haben keine Berechtigung, auf diese Seite zuzugreifen.`,admin:`Admin`,noGroups:`Keine Gruppen`,active:`Aktiv`,inactive:`Inaktiv`,edit:`Bearbeiten`,delete:`Löschen`,system:`System`,noGroupsAvailable:`Keine Gruppen verfügbar`,table:{username:`Benutzername`,groups:`Gruppen`,status:`Status`,actions:`Aktionen`},toast:{created:`Benutzer erfolgreich erstellt`,updated:`Benutzer erfolgreich aktualisiert`,deleted:`Benutzer erfolgreich gelöscht`,fillRequired:`Bitte füllen Sie alle Pflichtfelder aus`,passwordsDoNotMatch:`Passwörter stimmen nicht überein`,passwordTooShort:`Passwort muss mindestens 6 Zeichen lang sein`,ldapProvisioned:`LDAP-Benutzer „{{username}}" bereitgestellt`},modal:{createUser:`Benutzer erstellen`,editUser:`Benutzer bearbeiten`,cancel:`Abbrechen`,creating:`Erstellen...`,saving:`Speichern...`,saveChanges:`Änderungen speichern`,advancedAuthSubtitle:`mit erweiterter Authentifizierung`,tabsAriaLabel:`Benutzerquelle`,localTab:`Lokal`,ldapTab:`LDAP`,ldapSearchLabel:`Verzeichnis durchsuchen`,ldapSearchPlaceholder:`Benutzername, Name oder E-Mail eingeben...`,ldapMinChars:`Mindestens 2 Zeichen für die Suche eingeben`,ldapTypeToSearch:`Tippen, um das LDAP-Verzeichnis zu durchsuchen`,ldapSearching:`Verzeichnis wird durchsucht...`,ldapNoResults:`Keine passenden Benutzer im Verzeichnis`,ldapSearchError:`Verzeichnissuche fehlgeschlagen. Bitte LDAP-Server-Status prüfen.`,ldapAlreadyProvisioned:`Bereits bereitgestellt`,ldapSelectedLabel:`Ausgewählt`,ldapProvision:`Benutzer bereitstellen`,ldapProvisioning:`Wird bereitgestellt...`,ldapErrorProvision:`Bereitstellung fehlgeschlagen. Bitte LDAP-Server-Status prüfen und erneut versuchen.`},form:{username:`Benutzername`,usernamePlaceholder:`Benutzernamen eingeben`,email:`E-Mail`,emailPlaceholder:`benutzer@beispiel.de`,password:`Passwort`,passwordPlaceholder:`Passwort eingeben`,confirmPassword:`Passwort bestätigen`,confirmPasswordPlaceholder:`Passwort bestätigen`,newPasswordPlaceholder:`Neues Passwort eingeben`,confirmNewPasswordPlaceholder:`Neues Passwort bestätigen`,leaveBlankToKeep:`leer lassen, um das aktuelle zu behalten`,groups:`Gruppen`,optional:`optional`,autoGeneratedPassword:`Ein sicheres Passwort wird automatisch generiert und per E-Mail an den Benutzer gesendet.`,passwordManagedByAdvancedAuth:`Das Passwort wird durch erweiterte Authentifizierung verwaltet. Verwenden Sie "Passwort zurücksetzen", um ein neues Passwort per E-Mail an den Benutzer zu senden.`,resetPassword:`Passwort zurücksetzen`,resettingPassword:`Passwort wird zurückgesetzt...`},deleteModal:{title:`Benutzer löschen`,message:`Sind Sie sicher, dass Sie diesen Benutzer löschen möchten? Diese Aktion kann nicht rückgängig gemacht werden.`,confirm:`Benutzer löschen`}},streamOverlay:{title:`Stream-Overlay`,invalidPrinterId:`Ungültige Drucker-ID`,cameraStream:`Kamera-Stream`,progress:`Fortschritt`,eta:`ETA`,printerIdle:`Drucker ist inaktiv`,printerOffline:`Drucker offline`,builder:{title:`Stream-Overlay`,description:`Erstellt die URL für ein Stream-Overlay — eine bildschirmfüllende Kameraansicht mit eingeblendeten Live-Druckdaten, für OBS, ein Wanddisplay oder jede andere Browserquelle. Felder auswählen und URL kopieren.`,printer:`Drucker`,size:`Textgröße`,sizeSmall:`Klein`,sizeMedium:`Mittel`,sizeLarge:`Groß`,fps:`Bildrate`,fpsHint:`A1- und P1-Kameras liefern höchstens etwa 5 Bilder pro Sekunde, unabhängig vom eingestellten Wert.`,token:`Stream-Overlay-Token (optional)`,tokenHint:`Nur nötig, wenn die Anmeldung aktiviert ist: OBS hat keine eigene Sitzung. Oben eines mit dem Bereich Stream-Overlay erstellen.`,tokenWarning:`Diese URL enthält ein Token — wer sie lesen kann, sieht den Stream und den Dateinamen. Token widerrufen, um den Zugriff zu beenden.`,fields:`Anzuzeigende Felder`,fieldPrinter:`Druckername`,fieldFilename:`Dateiname`,fieldStatus:`Status`,fieldProgress:`Fortschrittsbalken`,fieldLayers:`Schichtanzahl`,fieldEta:`Restzeit und ETA`,fieldCamera:`Kamerabild`,chamberHint:`Die Kammertemperatur erscheint nur bei Modellen mit echtem Kammersensor — P1- und A1-Drucker melden einen bedeutungslosen Wert und lassen sie deshalb weg.`,urlTitle:`Overlay-URL`,open:`Öffnen`,showPreview:`Vorschau anzeigen`,hidePreview:`Vorschau ausblenden`,previewTitle:`Overlay-Vorschau`},status:{printing:`Druckt`,paused:`Pausiert`,finished:`Fertig`,failed:`Fehlgeschlagen`,idle:`Inaktiv`,unknown:`Unbekannt`}},profiles:{title:`Profile`,subtitle:`Verwalten Sie Ihre Slicer-Voreinstellungen und Druckvorschub-Kalibrierungen`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Lokale Profile`,kprofiles:`K-Profile`},orcaCloud:{connectedAs:`Verbunden als`,connectedShort:`Mit Orca Cloud verbunden`,logout:`Trennen`,noLogoutPermission:`Sie haben keine Berechtigung zum Trennen`,noConnectPermission:`Sie haben keine Berechtigung, sich mit Orca Cloud zu verbinden`,retry:`Erneut versuchen`,connectButton:`Orca Cloud verbinden`,connect:{title:`Mit Orca Cloud verbinden`,description:`Melden Sie sich bei Ihrem Orca Cloud-Konto an, um Ihre Slicer-Profile in Bambuddy zu synchronisieren.`},device:{title:`Bambuddy in Orca Cloud genehmigen`,instruction:`Öffnen Sie Orca Cloud und genehmigen Sie diesen Code. Bambuddy verbindet sich automatisch, sobald Sie genehmigt haben.`,codeLabel:`Ihr Kopplungscode`,openButton:`Orca Cloud-Genehmigungsseite öffnen`,manualHint:`Oder gehen Sie zu {{url}} und geben Sie den obigen Code ein.`,waiting:`Warte auf Ihre Genehmigung…`,cancel:`Abbrechen`},profiles:{title:`Ihre Orca Cloud-Profile ({{count}})`,refresh:`Aktualisieren`,empty:`Noch keine Profile in Ihrem Orca Cloud-Konto gefunden.`},toast:{disconnected:`Verbindung zu Orca Cloud getrennt`},errors:{startFailed:`Anmeldevorgang für Orca Cloud konnte nicht gestartet werden.`,denied:`Die Kopplung wurde in Orca Cloud abgelehnt.`,expired:`Der Kopplungscode ist abgelaufen. Klicken Sie auf Verbinden, um es erneut zu versuchen.`,pollFailed:`Die Verbindung ging beim Warten auf die Genehmigung verloren. Bitte versuchen Sie es erneut.`}},localProfiles:{title:`Lokale Profile`,subtitle:`Slicer-Voreinstellungen aus OrcaSlicer importieren und verwalten`,import:`Profile importieren`,importDesc:`.bbscfg-, .bbsflmt-, .orca_filament-, .zip- oder .json-Dateien hier ablegen`,importing:`Importiere...`,search:`Lokale Voreinstellungen durchsuchen...`,noPresets:`Noch keine lokalen Voreinstellungen`,noSearchResults:`Keine Voreinstellungen entsprechen deiner Suche`,badge:`Lokal`,edit:`Bearbeiten`,delete:`Löschen`,cancel:`Abbrechen`,deleteConfirmTitle:`Voreinstellung löschen`,deleteConfirm:`Möchten Sie diese Voreinstellung wirklich löschen? Dies kann nicht rückgängig gemacht werden.`,source:`Quelle`,inheritsFrom:`Erbt von`,filamentType:`Typ`,vendor:`Hersteller`,compatiblePrinters:`Drucker`,nozzleTemp:`Düsentemperatur`,cost:`Kosten`,density:`Dichte`,pressureAdvance:`Druckvorschub`,filament:`Filament`,process:`Prozess`,printer:`Drucker`,toast:{importSuccess:`{{count}} Voreinstellung(en) importiert`,importSkipped:`{{count}} Voreinstellung(en) übersprungen (Duplikate)`,importError:`{{count}} Fehler beim Import`,deleted:`Voreinstellung gelöscht`,updated:`Voreinstellung aktualisiert`}},connectedAs:`Verbunden als`,signInExpiredTitle:`Bambu-Cloud-Anmeldung abgelaufen`,signInExpiredBody:`Bambu Lab akzeptiert das gespeicherte Token nicht mehr. Melden Sie sich erneut an, um Cloud-Profile, MakerWorld-Importe und Firmware-Prüfungen wiederherzustellen.`,logout:`Abmelden`,noLogoutPermission:`Sie haben keine Berechtigung zum Abmelden`,failedToLoad:`Profile konnten nicht geladen werden`,retry:`Erneut versuchen`,time:{justNow:`Gerade eben`,minsAgo:`vor {{count}}m`,hoursAgo:`vor {{count}}h`,daysAgo:`vor {{count}}d`},toast:{loggedOut:`Abgemeldet`},login:{title:`Mit Bambu Cloud verbinden`,subtitle:`Synchronisieren Sie Ihre Slicer-Voreinstellungen geräteübergreifend`,email:`E-Mail`,password:`Passwort`,region:`Region`,regionGlobal:`Global`,regionChina:`China`,verificationCode:`Bestätigungscode`,totpCode:`Authenticator-Code`,checkEmail:`Prüfen Sie Ihre E-Mail ({{email}}) für einen 6-stelligen Code`,enterTotpHint:`Geben Sie den 6-stelligen Code aus Ihrer Authenticator-App ein`,accessToken:`Zugriffstoken`,accessTokenHint:`Fügen Sie Ihr Bambu-Cloud-Zugriffstoken ein. Konten der Region China müssen diesen Weg nutzen (telefonnummerngebunden — kein E-Mail-Login). Im Wiki steht, wie Sie das Token aus den MakerWorld-Cookies auslesen.`,back:`Zurück`,loginButton:`Anmelden`,verifyButton:`Bestätigen`,setTokenButton:`Token setzen`,useToken:`Stattdessen Zugriffstoken verwenden`,captchaTitle:`Bambu Cloud verlangt ein CAPTCHA`,captchaBody:`Bambu fordert für dein Netzwerk eine CAPTCHA-Prüfung, bevor eine Anmeldung akzeptiert wird, und diese Prüfung lässt sich aus Bambuddy heraus nicht beantworten. E-Mail und Passwort sind nicht das Problem. Die Sperre hängt an deiner öffentlichen IP-Adresse und löst sich normalerweise innerhalb weniger Stunden von selbst — wiederholte Versuche verlängern sie. Um dich jetzt anzumelden, verwende stattdessen ein Zugriffstoken aus einer Browser-Sitzung.`,useEmail:`Stattdessen mit E-Mail anmelden`,toast:{loggedIn:`Erfolgreich angemeldet`,codeSent:`Bestätigungscode an Ihre E-Mail gesendet`,enterTotp:`Geben Sie den Code aus Ihrer Authenticator-App ein`,tokenSet:`Token erfolgreich gesetzt`}},presets:{myPreset:`Mein Profil (bearbeitbar)`,duplicate:`Duplizieren`,editable:`Bearbeitbar`,failedToLoadDetails:`Profil-Details konnten nicht geladen werden`,deleteConfirm:`Dieses Profil löschen?`,deleteWarning:`"{{name}}" wird dauerhaft aus Bambu Cloud gelöscht. Dies kann nicht rückgängig gemacht werden.`,noDuplicatePermission:`Sie haben keine Berechtigung zum Duplizieren von Profilen`,noEditPermission:`Sie haben keine Berechtigung zum Bearbeiten von Profilen`,noDeletePermission:`Sie haben keine Berechtigung zum Löschen von Profilen`,types:{filament:`Filament-Profil`,printer:`Drucker-Profil`,process:`Prozess-Profil`},toast:{deleted:`Profil gelöscht`,created:`Profil erstellt`,updated:`Profil aktualisiert`,duplicated:`Profil dupliziert`,fieldAdded:`Feld "{{key}}" hinzugefügt`,exported:`Profil exportiert`},baseLabel:`Basis: {{name}}`,currentLabel:`Aktuell: {{name}}`,newPreset:`Neues Profil`,editPreset:`Profil bearbeiten`,duplicatePreset:`Profil duplizieren`,createNewPreset:`Neues Profil erstellen`,customizeSettings:`Passen Sie die Einstellungen für Ihr neues Profil an`,compareWithBase:`Mit Basis-Profil vergleichen`,compare:`Vergleichen`,basePreset:`Basis-Profil`,selectBasePreset:`Basis-Profil auswählen...`,presetName:`Profilname`,myCustomPreset:`Mein eigenes Profil`,inheritsFrom:`Erbt von`,dropJsonToImport:`JSON zum Importieren ablegen`,tabs:{common:`Allgemein`,allFields:`Alle Felder`},availableFields:`Verfügbare Felder`,searchFieldsPlaceholder:`Felder suchen...`,noMatchingFields:`Keine passenden Felder`,allFieldsAdded:`Alle Felder hinzugefügt`,addCustomField:`Eigenes Feld hinzufügen`,yourOverrides:`Ihre Überschreibungen`,noOverridesYet:`Noch keine Überschreibungen`,clickFieldsToAdd:`Klicken Sie links auf Felder, um sie hinzuzufügen`,saveAsTemplate:`Als Vorlage speichern`,jsonTip:`Tipp: Ziehen Sie eine .json-Datei auf dieses Fenster, um Einstellungen zu importieren`},cloudView:{searchPlaceholder:`Profile suchen...`,templates:`Vorlagen`,refresh:`Aktualisieren`,newPreset:`Neues Profil`,clearFilters:`Filter zurücksetzen`,compareMode:`Vergleichsmodus`,selectAnotherPreset:`Wählen Sie ein weiteres {{type}}-Profil`,clickTwoPresets:`Klicken Sie auf zwei Profile des gleichen Typs zum Vergleichen`,selectFirst:`1. Erstes auswählen`,selectSecond:`2. Zweites auswählen`,compareNow:`Jetzt vergleichen`,lastSynced:`Zuletzt synchronisiert:`,showingCount:`{{showing}} von {{total}} Profilen`,noPresetsFound:`Keine Profile gefunden`,columns:{filament:`Filament`,process:`Prozess`,printer:`Drucker`},noFilamentPresets:`Keine Filament-Profile`,noProcessPresets:`Keine Prozess-Profile`,noPrinterPresets:`Keine Drucker-Profile`,filters:{type:`Typ`,owner:`Besitzer`,printer:`Drucker`,nozzle:`Düse`,filament:`Filament`,layer:`Schicht`,all:`Alle`,myPresets:`Meine Profile`,builtIn:`Voreingestellt`,process:`Prozess`},noTemplatesPermission:`Sie haben keine Berechtigung, Vorlagen zu verwalten`,noRefreshPermission:`Sie haben keine Berechtigung, Profile zu aktualisieren`,noCreatePermission:`Sie haben keine Berechtigung, Profile zu erstellen`},templates:{title:`Schnellvorlagen`,noTemplates:`Noch keine Vorlagen`,createFirst:`Erstellen Sie Vorlagen aus dem Preset-Editor`,typeFilter:`Typ:`,deleteTitle:`Vorlage löschen`,deleteWarning:`Diese Aktion kann nicht rückgängig gemacht werden`,deleteConfirm:`Möchten Sie "{{name}}" wirklich löschen?`,namePlaceholder:`Vorlagenname`,descriptionPlaceholder:`Beschreibung`,settingsJson:`Einstellungen (JSON)`,fieldsCount:`{{count}} Felder`,shownInModals:`In Dialogen angezeigt`,hiddenInModals:`In Dialogen ausgeblendet`,apply:`Anwenden`,toast:{deleted:`Vorlage gelöscht`,updated:`Vorlage aktualisiert`,created:`Vorlage erstellt`,applied:`Vorlage angewendet`}}},support:{debugLoggingActive:`Debug-Protokollierung ist aktiv`,manageLogs:`Verwalten`,collectItem7:`Drucker-Verbindungsstatus und Firmware-Versionen`,collectItem8:`Integrationsstatus (Spoolman, MQTT, HA)`,collectItem9:`Netzwerkschnittstellen (nur Subnetze)`,collectItem10:`Python-Paketversionen`,collectItem11:`Datenbankzustandsprüfungen`,collectItem12:`Docker-Umgebungsdetails`,bundleGenerating:`Bundle wird erstellt...`,bundleStepConnection:`Drucker-Verbindungsprüfungen werden ausgeführt`,bundleStepVirtualPrinters:`Setup-Prüfungen für virtuelle Drucker werden ausgeführt`,bundleStepLogScan:`Aktuelle Protokolle werden auf bekannte Probleme überprüft`,bundleStepBuild:`Support-Bundle-ZIP wird erstellt`},fileManager:{variants:{badge:`{{count}} Versionen`,groupAction:`Als Versionen gruppieren`,groupTooltip:`Diese Dateien als denselben Auftrag markieren, gesliced für verschiedene Drucker`,grouped:`{{count}} Dateien als Versionen gruppiert`,printAlternatives:`Drucken ({{count}} Alternativen)`},title:`Dateimanager`,subtitle:`Organisieren und verwalten Sie Ihre Druckdateien`,uploadFiles:`Dateien hochladen`,newFolder:`Neuer Ordner`,folderName:`Ordnername`,folderNamePlaceholder:`z.B. Funktionsteile`,renameFile:`Datei umbenennen`,renameFolder:`Ordner umbenennen`,invalidFilenameChar:`Das Zeichen "{{char}}" ist in Druck-Dateinamen nicht erlaubt. Die SD-Karte des Druckers lehnt folgende Zeichen ab: < > : " / \\ | ? *`,moveFiles:`{{count}} Datei(en) verschieben`,rootNoFolder:`Stammverzeichnis (Kein Ordner)`,current:`aktuell`,linkFolder:`Ordner verknüpfen`,linkFolderDescription:`"{{name}}" mit einem Projekt oder Archiv verknüpfen für schnellen Zugriff.`,project:`Projekt`,archive:`Archiv`,noProjectsFound:`Keine Projekte gefunden`,noArchivesFound:`Keine Archive gefunden`,unlink:`Verknüpfung aufheben`,link:`Verknüpfen`,dragDropFiles:`Dateien hierher ziehen`,dropFilesHere:`Dateien hier ablegen`,releaseToUpload:`Loslassen zum Hochladen`,orClickToBrowse:`oder klicken zum Durchsuchen`,allFileTypesSupported:`Alle Dateitypen werden unterstützt. ZIP-Dateien werden extrahiert.`,zipFilesDetected:`ZIP-Dateien erkannt`,zipExtractOptions:`ZIP-Dateien werden extrahiert. Wählen Sie, wie die Ordnerstruktur behandelt werden soll:`,preserveZipStructure:`Ordnerstruktur aus ZIP beibehalten`,createFolderFromZip:`Ordner aus ZIP-Dateiname erstellen`,stlThumbnailGeneration:`STL-Vorschaubildgenerierung`,zipMayContainStl:`ZIP-Dateien können STL-Dateien enthalten. Vorschaubilder können während der Extraktion generiert werden.`,thumbnailsCanBeGenerated:`Vorschaubilder können für STL-Dateien generiert werden. Große Modelle benötigen möglicherweise mehr Zeit.`,generateThumbnailsForStl:`Vorschaubilder für STL-Dateien generieren`,threemfDetected:`3MF-Dateien erkannt`,threemfExtractionInfo:`Druckermodell, Material, Farbe und Druckeinstellungen werden automatisch aus 3MF-Dateien extrahiert.`,willBeExtracted:`Wird extrahiert`,filesExtracted:`{{count}} Dateien extrahiert`,uploadComplete:`Upload abgeschlossen: {{succeeded}} erfolgreich`,uploadFailed:`Hochladen fehlgeschlagen`,zipFilesFailed:`{{count}} Dateien fehlgeschlagen`,uploading:`Hochladen...`,changeLink:`Verknüpfung ändern...`,linkTo:`Verknüpfen mit...`,linkToProjectOrArchive:`Mit Projekt oder Archiv verknüpfen`,generateThumbnail:`Vorschaubild generieren`,generateThumbnails:`Vorschaubilder generieren`,generateThumbnailsForMissing:`Vorschaubilder für STL-Dateien ohne Vorschau generieren`,gridView:`Rasteransicht`,listView:`Listenansicht`,lowDiskSpaceWarning:`Warnung: Wenig Speicherplatz`,lowDiskSpaceDetails:`Nur {{free}} frei von {{total}} gesamt. Schwellenwert ist auf {{threshold}} GB eingestellt.`,files:`Dateien`,folders:`Ordner`,size:`Größe`,free:`Frei`,allFiles:`Alle Dateien`,allExternal:`Extern`,externalIsEmpty:`Keine externen Dateien`,externalEmptyDescription:`Dateien aus deinen verknüpften externen Ordnern erscheinen hier.`,wrap:`Umbrechen`,enableTextWrapping:`Textumbruch aktivieren`,disableTextWrapping:`Textumbruch deaktivieren`,collapse:`Einklappen`,collapseFoldersByDefault:`Ordner standardmäßig einklappen`,expandFoldersByDefault:`Ordner standardmäßig ausklappen`,folderSort:`Ordner sortieren`,folderSortByName:`Nach Name`,folderSortByActivity:`Nach letzter Aktivität`,dragToResizeTooltip:`Ziehen zum Ändern der Größe, Doppelklick zum Zurücksetzen`,searchFiles:`Dateien suchen...`,searchSubfoldersHint:`Inklusive Unterordner`,readme:{truncated:`Gekürzt`,show:`README anzeigen`,hide:`README ausblenden`,label:`README`},tags:{title:`Tags`,subtitle:`Dateien mit Labels versehen — Spielzeug, kindersicher, nur PETG, was immer du willst.`,manage:`Tags`,manageTitle:`Tag-Katalog verwalten`,add:`Neuer Tag`,edit:`Tag umbenennen`,name:`Name`,fileCount:`Dateien`,empty:`Noch keine Tags. Erstelle einen, um Dateien zu kennzeichnen.`,noMatches:`Keine passenden Tags.`,createPlaceholder:`z. B. Spielzeug, kindersicher, petg`,createButton:`Erstellen`,nameRequired:`Name ist erforderlich.`,searchPlaceholder:`Tags filtern...`,created:`Tag erstellt.`,updated:`Tag umbenannt.`,deleted:`Tag entfernt.`,saveFailed:`Tag konnte nicht gespeichert werden.`,deleteFailed:`Tag konnte nicht entfernt werden.`,applyFailed:`Tags konnten nicht angewendet werden.`,applyAdd:`Tags hinzufügen`,applyRemove:`Tags entfernen`,applyAddSuccess:`{{count}} Tag(s) zu {{files}} Datei(en) hinzugefügt.`,applyRemoveSuccess:`{{count}} Tag(s) von {{files}} Datei(en) entfernt.`,actionAdd:`Zu ausgewählten Dateien hinzufügen`,actionRemove:`Von ausgewählten Dateien entfernen`,tagAction:`Tag`,bulkTitle:`{{count}} ausgewählte Datei(en) taggen`,bulkTooltip:`Tags für alle ausgewählten Dateien hinzufügen oder entfernen.`,noPermission:`Du hast keine Berechtigung, Dateien zu taggen.`,filterLabel:`Filtern nach:`,clearAll:`Alle entfernen`,confirmDelete:`Tag "{{name}}" löschen?`,confirmDeleteMessage:`Entfernt den Tag aus dem Katalog. Dateien behalten ihre übrigen Tags.`,confirmDeleteInUseMessage:`Dieser Tag ist auf {{count}} Datei(en). Beim Löschen verschwindet er von allen; die Dateien selbst bleiben unverändert.`,editAria:`{{name}} bearbeiten`,deleteAria:`{{name}} löschen`},allTypes:`Alle Typen`,prints:`Drucke`,ascending:`Aufsteigend`,descending:`Absteigend`,showModified:`Änderungsdatum anzeigen`,hideModified:`Änderungsdatum ausblenden`,lastModified:`Zuletzt geändert`,lastActivity:`Letzte Aktivität`,resultsCount:`{{showing}} von {{total}} Dateien`,selectAll:`Alle auswählen`,deselectAll:`Auswahl aufheben`,selected:`{{count}} ausgewählt`,adding:`Hinzufügen...`,loadingFiles:`Dateien werden geladen...`,folderIsEmpty:`Ordner ist leer`,noFilesYet:`Noch keine Dateien`,folderEmptyDescription:`Laden Sie Dateien hoch oder verschieben Sie Dateien in diesen Ordner.`,noFilesDescription:`Laden Sie Dateien hoch, um Ihre Druckdateien zu organisieren.`,noMatchingFiles:`Keine passenden Dateien`,noMatchingFilesDescription:`Keine Dateien entsprechen Ihren aktuellen Such- oder Filterkriterien.`,clearFilters:`Filter zurücksetzen`,printedCount:`{{count}}x gedruckt`,uploadedBy:`Hochgeladen von`,deleteFolder:`Ordner löschen`,deleteFile:`Datei löschen`,deleteFilesCount:`{{count}} Dateien löschen`,deleteFolderConfirm:`Möchten Sie diesen Ordner wirklich löschen? Alle Dateien darin werden ebenfalls gelöscht.`,deleteFileConfirm:`Möchten Sie diese Datei wirklich löschen?`,deleteFilesConfirm:`Möchten Sie {{count}} ausgewählte Dateien wirklich löschen? Diese Aktion kann nicht rückgängig gemacht werden.`,deleting:`Wird gelöscht...`,noPermissionRenameFolder:`Sie haben keine Berechtigung, Ordner umzubenennen`,noPermissionLinkFolder:`Sie haben keine Berechtigung, Ordner zu verknüpfen`,noPermissionDeleteFolder:`Sie haben keine Berechtigung, Ordner zu löschen`,onlyEmptyFoldersDeletable:`Sie können nur leere Ordner löschen`,noPermissionPrint:`Sie haben keine Berechtigung zum Drucken`,noPermissionSlice:`Sie haben keine Berechtigung, Dateien zu slicen`,noPermissionAddToQueue:`Sie haben keine Berechtigung, zur Warteschlange hinzuzufügen`,noPermissionDownload:`Sie haben keine Berechtigung, Dateien herunterzuladen`,noPermissionPreview:`Sie haben keine Berechtigung, Dateien in der Vorschau anzuzeigen`,preview3d:`3D-Vorschau`,noPermissionRenameFile:`Sie haben keine Berechtigung, diese Datei umzubenennen`,noPermissionGenerateThumbnail:`Sie haben keine Berechtigung, Vorschaubilder zu generieren`,noPermissionDeleteFile:`Sie haben keine Berechtigung, diese Datei zu löschen`,noPermissionCreateFolder:`Sie haben keine Berechtigung, Ordner zu erstellen`,noPermissionUpload:`Sie haben keine Berechtigung, Dateien hochzuladen`,noPermissionMoveFiles:`Sie haben keine Berechtigung, Dateien zu verschieben`,noPermissionDeleteFiles:`Sie haben keine Berechtigung, Dateien zu löschen`,linkExternal:`Extern verknüpfen`,linkExternalFolder:`Externen Ordner verknüpfen`,linkExternalFolderDescription:`Ein Host-Verzeichnis (NAS, USB, Netzlaufwerk) in den Dateimanager einbinden. Dateien werden nicht kopiert — sie werden direkt vom Originalpfad gelesen.`,externalFolderNamePlaceholder:`z.B. NAS-Drucke`,externalPath:`Host-Pfad`,externalPathHelp:`Absoluter Pfad zum Verzeichnis auf dem Docker-Host. Muss als Bind-Mount in den Container eingebunden sein.`,readOnly:`Nur Lesen`,readOnlyHelp:`verhindert Uploads und Löschungen`,showHiddenFiles:`Versteckte Dateien anzeigen (Punkt-Dateien)`,externalFolder:`Externer Ordner`,scanFolder:`Scannen`,toast:{folderCreated:`Ordner erstellt`,openInSlicerFailed:`Konnte nicht im Slicer öffnen`,folderDeleted:`Ordner gelöscht`,fileDeleted:`Datei gelöscht`,filesDeleted:`{{count}} Dateien gelöscht`,filesMoved:`Dateien verschoben`,folderLinked:`Ordner verknüpft`,folderUnlinked:`Ordnerverknüpfung aufgehoben`,externalFolderLinked:`Externer Ordner verknüpft und gescannt`,folderScanned:`Scan abgeschlossen: {{added}} hinzugefügt, {{removed}} entfernt`,addedToQueue:`{{count}} Datei(en) zur Warteschlange hinzugefügt`,addedToQueuePartial:`{{added}} Datei(en) hinzugefügt, {{failed}} fehlgeschlagen`,failedToAddToQueue:`Fehler beim Hinzufügen: {{error}}`,fileRenamed:`Datei umbenannt`,folderRenamed:`Ordner umbenannt`,thumbnailsGenerated:`{{count}} Vorschaubild(er) generiert`,thumbnailsGeneratedPartial:`{{succeeded}} Vorschaubild(er) generiert, {{failed}} fehlgeschlagen`,noStlMissingThumbnails:`Keine STL-Dateien ohne Vorschaubild`,failedToGenerateThumbnails:`Fehler beim Generieren der Vorschaubilder: {{error}}`,thumbnailGenerated:`Vorschaubild generiert`,failedToGenerateThumbnail:`Fehler beim Generieren des Vorschaubildes: {{error}}`}},projects:{parentLabel:`Übergeordnetes Projekt`,parentNone:`Keines (Hauptprojekt)`,parentHint:`Dieses Projekt einem anderen unterordnen, damit seine Zahlen in ein Hauptprojekt einfließen`,partOf:`Teil von {{name}}`,subProjectCount:`{{count}} Unterprojekte`,subProjectsOf:`Unterprojekte von {{name}}`,collapseSubProjects:`Unterprojekte einklappen`,expandSubProjects:`Unterprojekte ausklappen`,title:`Projekte`,subtitle:`Organisieren und verfolgen Sie Ihre 3D-Druckprojekte`,newProject:`Neues Projekt`,editProject:`Projekt bearbeiten`,deleteProject:`Projekt löschen`,projectName:`Projektname`,description:`Beschreibung`,noProjects:`Noch keine Projekte`,noProjectsFiltered:`Keine {{status}} Projekte`,noProjectsFilteredHelp:`Sie haben keine {{status}} Projekte. Projekte werden hier angezeigt, wenn sich ihr Status ändert.`,createFirst:`Erstellen Sie Ihr erstes Projekt, um verwandte Drucke zu organisieren, den Fortschritt zu verfolgen und Ihre Builds zu verwalten.`,createFirstButton:`Erstes Projekt erstellen`,create:`Erstellen`,files:`Dateien`,prints:`Drucke`,plates:`Platten`,parts:`Teile`,lastModified:`Zuletzt geändert`,deleteConfirm:`Möchten Sie dieses Projekt wirklich löschen? Archive und Warteschlangenelemente werden getrennt, aber nicht gelöscht.`,addFiles:`Dateien hinzufügen`,removeFile:`Datei entfernen`,viewDetails:`Details anzeigen`,namePlaceholder:`z.B. Voron 2.4 Build`,descriptionPlaceholder:`Optionale Beschreibung...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URL muss mit http:// oder https:// beginnen`,openExternalUrl:`Projekt-URL öffnen`,coverImageLabel:`Titelbild`,coverImageAlt:`Projekt-Titelbild`,coverImageUpload:`Hochladen`,coverImageReplace:`Ersetzen`,coverImageRemove:`Entfernen`,color:`Farbe`,targetPlates:`Ziel-Platten`,targetPlatesPlaceholder:`z.B. 25`,targetPlatesHelp:`Anzahl der Druckaufträge`,targetParts:`Ziel-Teile`,targetPartsPlaceholder:`z.B. 150`,targetPartsHelp:`Benötigte Objekte insgesamt`,targetSets:`Kopien pro Datei`,targetSetsPlaceholder:`z. B. 10`,targetSetsHelp:`Wie oft jede druckbare Datei gedruckt werden soll`,tagsLabel:`Tags (kommagetrennt)`,tagsPlaceholder:`z.B. voron, funktional, geschenk`,dueDate:`Fälligkeitsdatum`,priority:`Priorität`,priorityLow:`Niedrig`,priorityNormal:`Normal`,priorityHigh:`Hoch`,priorityUrgent:`Dringend`,statusActive:`Aktiv`,statusCompleted:`Abgeschlossen`,statusArchived:`Archiviert`,done:`Fertig`,completed:`abgeschlossen`,failed:`fehlgeschlagen`,inQueue:`in Warteschlange`,noPrintsYet:`Noch keine Drucke`,printJobs:`Druckaufträge (Platten)`,partsPrinted:`Gedruckte Teile`,failedParts:`Fehlgeschlagene Teile`,import:`Importieren`,export:`Exportieren`,importProject:`Projekt importieren`,exportAll:`Alle Projekte exportieren`,loading:`Projekte werden geladen...`,noEditPermission:`Sie haben keine Berechtigung, Projekte zu bearbeiten`,noDeletePermission:`Sie haben keine Berechtigung, Projekte zu löschen`,noCreatePermission:`Sie haben keine Berechtigung, Projekte zu erstellen`,noImportPermission:`Sie haben keine Berechtigung, Projekte zu importieren`,noExportPermission:`Sie haben keine Berechtigung, Projekte zu exportieren`,toast:{created:`Projekt erstellt`,updated:`Projekt aktualisiert`,deleted:`Projekt gelöscht`,imported:`Projekt importiert`,multipleImported:`{{count}} Projekte importiert`,importFailed:`Import fehlgeschlagen`,exported:`Projekte exportiert (nur Metadaten)`}},projectDetail:{notFound:`Projekt nicht gefunden`,backToProjects:`Zurück zu Projekten`,export:`Exportieren`,exportProject:`Projekt exportieren`,noExportPermission:`Sie haben keine Berechtigung, Projekte zu exportieren`,noEditPermission:`Sie haben keine Berechtigung, Projekte zu bearbeiten`,partOf:`Teil von:`,priorityLabel:`Priorität:`,noPrints:`Noch keine Drucke in diesem Projekt`,status:{active:`Aktiv`,completed:`Abgeschlossen`,archived:`Archiviert`},priority:{low:`Niedrig`,normal:`Normal`,high:`Hoch`,urgent:`Dringend`},dueDate:{overdue:`Überfällig`,today:`Heute fällig`,daysLeft:`{{count}} Tage übrig`},progress:{platesProgress:`Platten-Fortschritt`,partsProgress:`Teile-Fortschritt`,setsProgress:`Vollständige Sätze`,sets:`Sätze`,setsHint:`Ein Satz ist vollständig, wenn jede druckbare Datei diese Anzahl erreicht hat`,printJobs:`Druckaufträge`,parts:`Teile`,percentComplete:`{{percent}}% abgeschlossen`,remaining:`{{count}} verbleibend`},stats:{printJobs:`Druckaufträge`,total:`gesamt`,failed:`{{count}} fehlgeschlagen`,partsPrinted:`{{count}} Teile gedruckt`,printTime:`Druckzeit`,filamentUsed:`Filament verbraucht`},cost:{title:`Kostenverfolgung`,filamentCost:`Filamentkosten`,energy:`Energie`,totalCost:`Erwartete Gesamtkosten`,total:`Gesamt`,includesBom:`inkl. Stückliste`,budget:`Budget`,remaining:`Verbleibend`},subProjects:{title:`Unterprojekte ({{count}})`,jobs:`{{count}} Aufträge`},rollup:{title:`Inklusive {{count}} Unterprojekten`,progress:`Gesamtfortschritt`,percentComplete:`{{percent}}% abgeschlossen`},notes:{title:`Notizen`,noEditPermission:`Sie haben keine Berechtigung, Notizen zu bearbeiten`,placeholder:`Notizen zu diesem Projekt hinzufügen...`,empty:`Noch keine Notizen. Klicken Sie auf Bearbeiten, um Notizen hinzuzufügen.`},files:{title:`Dateien`,linkFolders:`Ordner aus dem Dateimanager verknüpfen`,forQuickAccess:`für schnellen Zugriff auf dieses Projekt.`,fileCount:`{{count}} Datei(en)`,empty:`Keine Ordner verknüpft. Gehen Sie zum Dateimanager und verknüpfen Sie einen Ordner mit diesem Projekt.`,printedCount:`{{count}}-mal gedruckt`,progressTooltip:`{{done}} von {{target}} abgeschlossenen Drucken`,noFiles:`Keine Dateien in diesem Ordner.`},bom:{title:`Stückliste`,acquired:`{{completed}}/{{total}} beschafft`,showAll:`Alle anzeigen`,hideDone:`Erledigte ausblenden`,addPart:`Teil hinzufügen`,noAddPermission:`Sie haben keine Berechtigung, Teile hinzuzufügen`,partNamePlaceholder:`Teilename (z.B. M3x8 Schrauben)`,partName:`Teilename`,qty:`Menge`,price:`Preis ({{currency}})`,sourcingUrlPlaceholder:`Bezugsquelle-URL (optional)`,remarksPlaceholder:`Bemerkungen (optional)`,deletePart:`Teil löschen`,deleteConfirm:`Möchten Sie "{{name}}" wirklich löschen?`,noUpdatePermission:`Sie haben keine Berechtigung, Teile zu aktualisieren`,noEditPermission:`Sie haben keine Berechtigung, Teile zu bearbeiten`,noDeletePermission:`Sie haben keine Berechtigung, Teile zu löschen`,totalCost:`Gesamtkosten:`,empty:`Keine Teile in der Stückliste. Fügen Sie Hardware, Elektronik oder andere Komponenten hinzu, um zu verfolgen, was beschafft werden muss.`},timeline:{title:`Aktivitätsverlauf`,empty:`Noch keine Aktivität.`},template:{saveAsTemplate:`Als Vorlage speichern`,noCreatePermission:`Sie haben keine Berechtigung, Vorlagen zu erstellen`},queue:{title:`Warteschlange`,viewAll:`Alle anzeigen`,printing:`{{count}} druckend`,queued:`{{count}} in Warteschlange`},prints:{title:`Drucke ({{count}})`},toast:{projectUpdated:`Projekt aktualisiert`,partAdded:`Teil hinzugefügt`,partRemoved:`Teil entfernt`,exportFailed:`Export fehlgeschlagen`,projectExported:`Projekt exportiert`,templateCreated:`Vorlage erstellt`}},system:{title:`Systeminformationen`,version:`Version`,uptime:`Laufzeit`,cpuUsage:`CPU-Auslastung`,memoryUsage:`Speicherauslastung`,diskUsage:`Festplattenauslastung`,networkInfo:`Netzwerkinformationen`,logs:`Protokolle`,debugMode:`Debug-Modus`,enableDebug:`Debug-Protokollierung aktivieren`,disableDebug:`Debug-Protokollierung deaktivieren`,downloadLogs:`Protokolle herunterladen`,clearLogs:`Protokolle löschen`,dockerInfo:`Docker-Info`,containerName:`Container-Name`,imageName:`Image-Name`,platform:`Plattform`,architecture:`Architektur`},sponsors:{sectionTitle:`Unabhängig & von der Community finanziert`,tagline:`Bambuddy ist kostenlos und bleibt es, weil Menschen es freiwillig unterstützen. Kein VC, kein Cloud-Zwang.`,viewSupporters:`Unterstützer ansehen`,toastPrints:`Du hast {{count}} Drucke mit Bambuddy abgeschlossen. Bambuddy bleibt kostenlos dank seiner Unterstützer.`,toastCost:`Du hast {{total}} an Filament mit Bambuddy verfolgt. Sieh dir an, wer das Projekt unabhängig hält.`,toastArchives:`{{count}} Drucke mit Bambuddy archiviert. Sieh dir an, wer es unabhängig hält.`,toastAnniversary:`Ein Jahr mit Bambuddy! Sieh dir an, wer das Projekt unabhängig hält.`,toastVersionUpdate:`Aktualisiert auf v{{version}}. Bambuddy bleibt kostenlos dank seiner Unterstützer.`,toastBusiness:`Sie betreiben Bambuddy auf {{count}} Druckern. Für Teams gibt es Support-Pakete – bevorzugte Fehlerbehebung, Rechnungsstellung und einen direkten Draht zum Maintainer.`,businessCta:`Bambuddy für Unternehmen`,businessTitle:`Bambuddy für Unternehmen`,businessTagline:`Sie betreiben {{count}} Drucker. Für Teams und Druckfarmen gibt es priorisierten Support, kommerzielle Lizenzen und Rechnungsstellung.`},library:{title:`Filament-Bibliothek`,addFilament:`Filament hinzufügen`,editFilament:`Filament bearbeiten`,deleteFilament:`Filament löschen`,vendor:`Hersteller`,material:`Material`,color:`Farbe`,kFactor:`K-Faktor`,temperature:`Temperatur`,noFilaments:`Keine Filamente in der Bibliothek`,deleteConfirm:`Möchten Sie dieses Filament wirklich löschen?`,importFromPrinter:`Vom Drucker importieren`,exportToFile:`In Datei exportieren`,runWithPipeline:{actionLabel:`Mit Pipeline ausführen`,noPermission:`Du hast keine Berechtigung, Pipelines auszuführen`,modalTitle:`Mit Pipeline ausführen`,confirmTitle:`Lauf bestätigen`,confirmIntro:`Pre-Flight hat Probleme mit diesem Lauf gefunden`,sourceHint:`Quelle`,pipelineHint:`Pipeline`,targetHint:`Ziel`,pipelineListAria:`Verfügbare Pipelines`,runAnyway:`Trotzdem ausführen`,loading:`Wird geladen…`,empty:`Noch keine Pipelines gespeichert. Öffne den Slice-Dialog und klicke „Als Pipeline speichern“, um eine zu erstellen.`,noTarget:`Kein Zieldrucker festgelegt`,noTargetMessage:`Diese Pipeline hat keinen Zieldrucker. Öffne sie in den Einstellungen, um einen festzulegen.`,copies:`Kopien`,copiesHint:`max. {{n}}`,classTarget:`Beliebiger {{model}}`,toast:{started:`Pipeline-Lauf gestartet`,failed:`Lauf konnte nicht gestartet werden`},issue:{printerNotSet:`Kein Zieldrucker für diese Pipeline festgelegt.`,printerNotFound:`Zieldrucker existiert nicht mehr.`,printerDisabled:`Zieldrucker ist deaktiviert.`,printerOffline:`Zieldrucker ist offline.`,filamentType:`Filament-Slot {{slot}}: erwartet {{expected}}, AMS hat {{actual}}`,filamentColor:`Filament-Slot {{slot}}: Farbe weicht ab (erwartet {{expected}}, AMS hat {{actual}})`,amsSlotMissing:`AMS-Slot {{slot}} ist auf diesem Drucker nicht verfügbar`,filamentUnverified:`Filament-Slot {{slot}} stammt aus einem Cloud-/Standard-Preset und konnte nicht statisch verifiziert werden.`,noClassMatches:`Keine Drucker in dieser Installation entsprechen der Zielmodellklasse der Pipeline ({{expected}}).`,classNotSet:`Pipeline-Ziel ist auf eine Druckerklasse gesetzt, aber kein Modell wurde gewählt.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Es werden Slicer-Standardwerte angezeigt: Ihr Slicer-Sidecar ist älter als diese Funktion und kann die Werte eines Profils nicht liefern. Aktualisieren Sie das Sidecar-Image, um sie zu sehen. Alles, was Sie nicht ändern, verwendet weiterhin das Profil.`,presetValuesNotConfigured:`Es werden Slicer-Standardwerte angezeigt: Es ist kein Slicer-Sidecar konfiguriert, daher können die Werte eines Profils nicht gelesen werden. Alles, was Sie nicht ändern, verwendet weiterhin das Profil.`,presetValuesSidecarUnavailable:`Es werden Slicer-Standardwerte angezeigt: Das Slicer-Sidecar hat nicht geantwortet, daher können die Werte eines Profils nicht gelesen werden. Alles, was Sie nicht ändern, verwendet weiterhin das Profil.`,presetValuesUnavailable:`Es werden Slicer-Standardwerte angezeigt: Die Werte des gewählten Profils konnten nicht gelesen werden. Alles, was Sie nicht ändern, verwendet weiterhin das Profil.`,filamentDefault:`Standard`,fromFile:`aus Datei`,fromFileHint:`Der Designer hat dies in der Quelldatei geändert. Wert: {{value}}.`,fromFilePrinterCoupled:`Drucker des Designers`,fromFilePrinterCoupledHint:`Auf den Drucker abgestimmt, für den diese Datei erstellt wurde – auf Ihrem kann der Wert falsch oder außerhalb des Bereichs sein.`,fromFileOverridesPreset:`überschreibt Preset`,fromFileOverridesPresetHint:`Die Datei setzt hier {{value}}, das gewählte Preset verwendet {{preset}}. Nur aktivieren, wenn die Datei Vorrang haben soll.`,useFromFile:`Wert aus der Quelldatei für {{option}} verwenden`,otherFromFile:`Weitere Einstellungen aus dieser Datei`,fromFileSummary:`Der Designer hat in dieser Datei {{count}} Prozesseinstellungen geändert. Verwendet werden nur die, die du ankreuzt.`,fromFileUseAll:`Einstellungen des Designers übernehmen`,fromFileUseAllHint:`Kreuzt die Einstellungen an, die sich auf andere Drucker übertragen lassen. Die auf den Drucker des Designers abgestimmten und die, die dein gewähltes Preset ausmachen, bleiben aus.`,fromFileClear:`{{count}} zurücksetzen`,loading:`Slicer-Einstellungen werden geladen…`,mode:{simple:`Einfach`,advanced:`Erweitert`,expert:`Experte`},searchPlaceholder:`Einstellungen suchen`,resetAll:`{{count}} zurücksetzen`,resetOption:`Auf Standard zurücksetzen`,noMatches:`Keine Einstellungen passen zu dieser Suche.`},slice:{filamentSlotUnset:`nicht gewählt`,processSettingsEmbedded:`Wird nicht verwendet, solange „Integrierte Einstellungen der Datei verwenden“ aktiv ist – die Einstellungen der Datei bestimmen diesen Slice.`,processSettingsInactive:`Inaktiv`,presetsHidden:`{{count}} ausgeblendet`,showAllPresets:`Alle anzeigen`,showFewerPresets:`Weniger anzeigen`,processSettings:`Prozesseinstellungen`,processSettingsHint:`Passen Sie das gewählte Profil für diesen Slice an. Alles, was Sie nicht ändern, bleibt wie im Profil definiert.`,processSettingsChanged:`{{count}} geändert`,processSettingsUnchanged:`Profilstandard`,title:`Modell slicen`,action:`Slicen`,actionAll:`Alle {{count}} Plates slicen`,actionAllTitle:`Alle Plates in eine einzelne Multi-Plate-Ausgabe slicen (ein Archiv). Die Filamentauswahl gilt für jeden Slot des Projekts.`,allPlatesToggle:`Alle {{count}} Plates slicen`,slicing:`Slicen…`,printer:`Drucker-Profil`,process:`Prozess-Profil`,filament:`Filament-Profil`,filamentSlot:`Filament {{index}} – {{type}}`,filamentColour:`Filamentfarbe`,selectPreset:`— Profil auswählen —`,loadingPresets:`Profile werden geladen…`,analyzingPlateFilaments:`Plattenfilamente werden analysiert…`,analyzingPlateFilamentsHint:`Es wird ein Probeschnitt ausgeführt, um die belegten AMS-Slots dieser Platte zu ermitteln. Wird zwischengespeichert — erneutes Öffnen ist sofort.`,previewToast:`{{name}} wird analysiert — {{elapsed}}`,previewWithProgress:`{{name}} wird analysiert — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— wird von dieser Platte nicht verwendet`,noPresetsForSlot:`Keine Profile verfügbar`,otherPrinters:`Andere Drucker`,presetsLoadFailed:`Profile konnten nicht geladen werden. Importiere sie zuerst unter Einstellungen → Profile.`,refreshPresets:`Aktualisieren`,refreshPresetsTitle:`Profile neu laden — die aktuellen Cloud- und Bundle-Listen abrufen (nach dem Löschen eines Profils in Bambu Studio oder Bambu Handy verwenden)`,allPresetsRequired:`Alle Profile müssen ausgewählt sein`,useEmbedded:`Eingebettete Einstellungen der Datei verwenden`,useEmbeddedHint:`So slicen, wie der Ersteller es angelegt hat (Wände, Füllung, Filament), statt mit den obigen Profilen. Verfügbar, weil dein Drucker zur Datei passt.`,autoOrient:`Objekte automatisch ausrichten`,autoOrientHint:`Der Slicer dreht jedes Objekt zuerst auf die am besten druckbare Seite. Überschreibt die Ausrichtung aus der Datei.`,autoArrange:`Automatisch auf dem Druckbett anordnen`,autoArrangeHint:`Der Slicer verteilt die Objekte so, dass sie sich nicht mehr überlappen. Ersetzt die Anordnung aus der Datei.`,enqueuing:`Slice-Auftrag wird übermittelt…`,queued:`In Warteschlange…`,failed:`Slicen fehlgeschlagen. Logs des Slicer-Sidecars prüfen.`,startedToast:`{{name}} wird im Hintergrund gesliced…`,queuedToast:`Warteschlange: {{name}} — {{elapsed}}`,runningToast:`{{name}} wird gesliced — {{elapsed}}`,runningWithProgress:`{{name}} – {{stage}} ({{percent}} %) – {{elapsed}}`,runningWithProgressMultiPlate:`Plate {{plateIndex}} von {{plateCount}} • {{name}} – {{stage}} ({{percent}} %) – {{elapsed}}`,completedToast:`{{name}} wurde gesliced`,externalWriteFallbackToast:`In der internen Bibliothek gespeichert: In den externen Ordner konnte nicht geschrieben werden`,failedTitle:`Slicen fehlgeschlagen`,failedToast:`Slicen von {{name}} fehlgeschlagen: {{detail}}`,tier:{local:`Importiert`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Standard`},cloud:{notAuthenticated:`In Bambu Cloud anmelden (Einstellungen → Profile → Bambu Cloud), um deine Cloud-Profile zu sehen.`,expired:`Bambu-Cloud-Sitzung abgelaufen — erneut anmelden, um die Cloud-Profile zu aktualisieren.`,unreachable:`Bambu Cloud ist gerade nicht erreichbar. Lokale und Standard-Profile funktionieren weiterhin.`},orcaCloud:{notAuthenticated:`Bei Orca Cloud anmelden (Profile → Orca Cloud), um Ihre Orca-Profile zu sehen.`,expired:`Orca Cloud-Sitzung abgelaufen — erneut anmelden, um die Orca-Profile zu aktualisieren.`,unreachable:`Orca Cloud ist derzeit nicht erreichbar. Andere Profile funktionieren weiterhin.`},bedType:{label:`Druckbett`,auto:`Auto (aus Prozess-Profil)`,coolPlate:`Cool Plate`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`},pipelines:{label:`Pipeline`,applyAria:`Pipeline anwenden`,applyPrompt:`Pipeline anwenden…`,empty:`Keine gespeicherten Pipelines`,saveButton:`Als Pipeline speichern`,saveTitle:`Aktuelle Auswahl aller vier Slots als wiederverwendbare Pipeline speichern`,namePlaceholder:`Pipeline-Name`,nameAria:`Neuer Pipeline-Name`,toast:{applied:`„{{name}}“ angewendet`,saved:`Pipeline gespeichert`,saveFailed:`Speichern fehlgeschlagen`}}},spoolman:{title:`Spoolman-Integration`,enabled:`Spoolman aktiviert`,url:`Spoolman URL`,connected:`Verbunden`,disconnected:`Nicht verbunden`,testConnection:`Verbindung testen`,sync:`Synchronisieren`,syncing:`Synchronisiert...`,lastSync:`Letzte Synchronisierung`,linkToSpoolman:`Mit Spoolman verknüpfen`,openInSpoolman:`In Spoolman öffnen`,unlinkSpool:`Spule trennen`,unlinkConfirmTitle:`Spule entfernen?`,unlinkConfirmMessage:`Die Spule wird vom Slot entfernt. Die Spulendaten selbst bleiben unverändert.`,selectSpool:`Spule auswählen`,noUnlinkedSpools:`Keine nicht zugewiesenen Spulen verfügbar`,linkSuccess:`Spule erfolgreich zugewiesen`,linkFailed:`Spule konnte nicht zugewiesen werden`,unlinkSuccess:`Spule erfolgreich entfernt`,unlinkFailed:`Spule konnte nicht entfernt werden`,linkedSpool:`Zugewiesene Spule`,spoolId:`Spulen-ID`,fillSourceLabel:`(Spoolman)`,weight:`Gewicht`,remaining:`Verbleibend`,disableWeightSync:`AMS-Gewichtsschätzung deaktivieren`,disableWeightSyncDesc:`Verbleibende Kapazität nicht aus AMS-Schätzungen aktualisieren. Verwenden Sie dies, wenn Sie die Verbrauchserfassung von Spoolman gegenüber den prozentualen AMS-Schätzungen bevorzugen. Neue Spulen verwenden weiterhin die AMS-Schätzung als Anfangsgewicht.`,reportPartialUsage:`Teilverbrauch bei fehlgeschlagenen Drucken melden`,reportPartialUsageDesc:`Wenn ein Druck fehlschlägt oder abgebrochen wird, den geschätzten Filamentverbrauch bis zu diesem Zeitpunkt basierend auf dem Schichtfortschritt melden.`},locations:{title:`Lagerorte`,subtitle:`Regale, Schubladen und andere physische Lagerplätze für Spulen verwalten`,add:`Lagerort hinzufügen`,addShort:`Hinzufügen`,edit:`Lagerort bearbeiten`,name:`Name`,spools:`Spulen`,sensors:`Sensoren`,empty:`Noch keine Lagerorte. Erstellen Sie Ihr erstes Regal oder Ihre erste Schublade.`,manage:`Lagerorte`,createPlaceholder:`z. B. Regal A, Schublade 1`,nameRequired:`Name des Lagerorts ist erforderlich`,created:`Lagerort erstellt`,updated:`Lagerort aktualisiert`,deleted:`Lagerort gelöscht`,saveFailed:`Lagerort konnte nicht gespeichert werden`,deleteFailed:`Lagerort konnte nicht gelöscht werden`,deleteBlocked:`Entfernen Sie zuerst alle Spulen von diesem Lagerort`,confirmDelete:`„{{name}}“ löschen?`,confirmDeleteMessage:`Dieser Lagerort wird aus dem Katalog entfernt. Spulen müssen zuerst verschoben werden.`,confirmDeleteMessageWithSensors:`Dieser Lagerort wird aus dem Katalog entfernt. Spulen müssen zuerst verschoben werden. Verbundene Sensoren werden ebenfalls gelöscht.`},inventory:{title:`Spulen-Inventar`,subtitle:`Verwalten Sie Ihre Spulen`,addToInventory:`Zum Inventar hinzufügen`,addToInventoryPending:`Wird hinzugefügt...`,addToInventorySuccess:`Spule zum Inventar hinzugefügt`,addToInventoryFailed:`Spule konnte nicht zum Inventar hinzugefügt werden`,unknownSpoolTitle:`Neues Filament erkannt`,unknownSpoolMessage:`An {{location}} wurde eine Spule mit unbekanntem RFID-Tag erkannt. Jetzt zum Inventar hinzufügen?`,unknownSpoolSlot:`Slot`,bulk:{selectAllVisible:`Alle sichtbaren auswählen`,selectRow:`Zeile auswählen`,selectGroup:`Gruppe auswählen`,selectionCount:`{{count}} ausgewählt`,edit:`Bearbeiten`,printLabels:`Etiketten drucken`,resetUsage:`Verbrauch zurücksetzen`,restore:`Wiederherstellen`,archive:`Archivieren`,delete:`Löschen`,clearSelection:`Auswahl aufheben`,editTitle:`Spulen sammelbearbeiten`,editSubtitle:`Wird auf {{count}} ausgewählte Spulen angewendet. Nur angekreuzte Felder werden aktualisiert.`,editHint:`In ein Feld tippen markiert es für die Aktualisierung — nur angekreuzte Zeilen werden gesendet. Leere Felder bleiben unverändert (Felder leeren geht nur pro Spule).`,useCustom:`„{{value}}" verwenden`,toggleField:`Aktualisierung für dieses Feld umschalten`,changeCount:`{{count}} Felder werden aktualisiert.`,applyPending:`Wird angewendet...`,applyButton:`Auf {{count}} Spulen anwenden`,deleteTitle:`Ausgewählte Spulen löschen`,archiveTitle:`Ausgewählte Spulen archivieren`,restoreTitle:`Ausgewählte Spulen wiederherstellen`,resetUsageTitle:`Verbrauch ausgewählter Spulen zurücksetzen`,deleteMessage:`{{count}} Spulen dauerhaft löschen? Dies kann nicht rückgängig gemacht werden.`,archiveMessage:`{{count}} Spulen archivieren? Sie können später wiederhergestellt werden.`,restoreMessage:`{{count}} archivierte Spulen wiederherstellen?`,resetUsageMessage:`Den "Gesamtverbrauch"-Zähler auf {{count}} Spulen zurücksetzen? Die verbleibende Menge bleibt erhalten.`,updateSuccess:`{{count}} Spulen aktualisiert`,updateFailed:`Sammelaktualisierung fehlgeschlagen`,updatePartial:`{{ok}} Spulen aktualisiert, {{failed}} fehlgeschlagen`,updateAllFailed:`Alle {{count}} Aktualisierungen fehlgeschlagen — Auswahl bleibt erhalten zum erneuten Versuch`,deleteSuccess:`{{count}} Spulen gelöscht`,deleteFailed:`Sammellöschung fehlgeschlagen`,deletePartial:`{{ok}} Spulen gelöscht, {{failed}} fehlgeschlagen`,deleteAllFailed:`Alle {{count}} Löschungen fehlgeschlagen — Auswahl bleibt erhalten zum erneuten Versuch`,archiveSuccess:`{{count}} Spulen archiviert`,archiveFailed:`Sammelarchivierung fehlgeschlagen`,archivePartial:`{{ok}} Spulen archiviert, {{failed}} fehlgeschlagen`,archiveAllFailed:`Alle {{count}} Archivierungen fehlgeschlagen — Auswahl bleibt erhalten zum erneuten Versuch`,restoreSuccess:`{{count}} Spulen wiederhergestellt`,restoreFailed:`Sammelwiederherstellung fehlgeschlagen`,restorePartial:`{{ok}} Spulen wiederhergestellt, {{failed}} fehlgeschlagen`,restoreAllFailed:`Alle {{count}} Wiederherstellungen fehlgeschlagen — Auswahl bleibt erhalten zum erneuten Versuch`,invalidHex:`6 Hex-Zeichen (RRGGBB) oder 8 (RRGGBBAA) eingeben. Anderenfalls wird das Feld nicht übernommen.`},spoolmanMixedContentTitle:`Spoolman lässt sich nicht über HTTPS laden — Browser blockiert gemischte Inhalte`,spoolmanMixedContentBody:`Bambuddy wird über HTTPS ausgeliefert (über deinen Reverse-Proxy), aber deine Spoolman-URL ist nach wie vor HTTP. Browser blockieren gemischte Inhalte aus Sicherheitsgründen, daher kann die eingebettete Spoolman-Oberfläche nicht geladen werden. Spoolman muss ebenfalls über HTTPS erreichbar sein.`,spoolmanMixedContentFixReverseProxy:`Stelle Spoolman hinter denselben Reverse-Proxy wie Bambuddy (Traefik / Nginx / Caddy) mit HTTPS und aktualisiere die Spoolman-URL in den Einstellungen auf die neue HTTPS-Adresse.`,spoolmanMixedContentFixOpenNewTab:`Als Workaround kannst du Spoolman in einem neuen Tab über HTTP öffnen — gemischte Inhalte werden nur innerhalb eingebetteter Frames blockiert, ein eigener Tab funktioniert weiterhin.`,spoolmanOpenInNewTab:`Spoolman in neuem Tab öffnen`,labels:{title:`Spulen-Etiketten drucken`,selectedCount:`{{count}} ausgewählt`,pickSpools:`Wählen Sie, für welche Spulen Etiketten gedruckt werden sollen:`,monochrome:`Monochrom (Schwarz-Weiß-Drucker)`,monochromeHint:`Entfernt das Farbfeld und verbreitert den Text`,startingPosition:`Startposition des Etiketts`,startingPositionRange:`Nur Bogenvorlagen: L7160 unterstützt 1–21; 5160 unterstützt 1–30.`,startingPositionInvalid:`Gib eine ganze Zahl zwischen 1 und {{capacity}} ein.`,startingPositionFirst:`Der Druck beginnt bei Position 1.`,startingPositionSkipped:`Die Positionen 1 bis {{lastPosition}} bleiben auf dem ersten Bogen leer.`,startingPositionRangeError:`Die Startposition muss für diesen Bogen zwischen 1 und {{capacity}} liegen.`,searchPlaceholder:`Name, Marke oder #ID suchen`,filterByMaterial:`Material:`,allMaterials:`Alle`,selectVisible:`Alle sichtbaren auswählen ({{count}})`,deselectVisible:`Sichtbare abwählen`,clearAll:`Alle entfernen`,noSpoolsToShow:`Keine Spulen anzuzeigen. Filter anpassen und erneut versuchen.`,noMatches:`Keine Spulen entsprechen der aktuellen Suche oder dem Filter.`,printOne:`Etikett für diese Spule drucken`,printLabels:`Etiketten drucken…`,bulkTitle:`Spulen aus den aktuell angezeigten {{count}} zum Etikettieren auswählen`,noSpoolsTitle:`Keine Spulen zum Etikettieren`,error:`Etiketten konnten nicht erstellt werden: {{msg}}`,sortBy:{label:`Sortieren:`,id:`Nach ID`,color:`Nach Farbe`},templates:{amsHolderSmall:{label:`AMS-Halter — klein (74 × 33 mm)`,hint:`Ein Etikett pro Seite; passt zum druckbaren Etikett aus dem MakerWorld-Modell 752566 (AMS-Filament-Etikettenhalter).`},amsHolderLarge:{label:`AMS-Halter — groß (75 × 55 mm)`,hint:`Ein Etikett pro Seite; passt zur Kartoneinleger-Variante des AMS-Filament-Etikettenhalters. Genug Platz für Farbprobe, Marke, Material, ID und QR-Code.`},box40x30:{label:`Boxetikett (40 × 30 mm)`,hint:`Ein Etikett pro Seite; gängige DK/Brother-Rollengröße, ideal für Filament-Beutel und Lager-Etiketten.`},box:{label:`Box label (62 × 29 mm)`,hint:`Ein Etikett pro Seite; für Brother PT/QL und Dymo-Kleinetiketten dimensioniert.`},averyL7160:{label:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,hint:`EU-Bogenformat; 21 Etiketten pro A4-Seite.`},avery5160:{label:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,hint:`US-Bogenformat; 30 Etiketten pro Letter-Seite.`}}},csv:{importButton:`CSV importieren`,exportButton:`CSV exportieren`,modalTitle:`Spulen aus CSV importieren`,selectFile:`CSV-Datei auswählen oder hierher ziehen`,dragHint:`Kopfzeile: material (erforderlich), brand, subtype, color_name, rgba, …`,parsing:`Datei wird gelesen…`,previewError:`CSV-Datei konnte nicht gelesen werden`,validCount:`{{count}} gültig`,errorCount:`{{count}} Fehler`,skippedCount:`{{count}} übersprungen`,colRow:`Zeile`,colStatus:`Status`,colColor:`Farbe`,colorResolved:`Farbe aus Katalog übernommen`,colorCrossMaterial:`Farbe von einem anderen Material übernommen — keine exakte Übereinstimmung im Katalog`,duplicateExisting:`Eine Spule mit diesem Material, dieser Marke und Farbe existiert bereits — sie wird trotzdem als neue Spule importiert`,spoolmanHint:`Im Spoolman-Modus den integrierten CSV-Import/-Export von Spoolman verwenden.`,importValidRows:`{{count}} gültige Zeilen importieren`,noValidRows:`Keine gültigen Zeilen`,importing:`Wird importiert…`,importSuccess:`{{count}} Spulen importiert`,importError:`Import fehlgeschlagen`,exportError:`Export fehlgeschlagen`},addSpool:`Spule hinzufügen`,copySpool:`Spule kopieren`,editSpool:`Spule bearbeiten`,material:`Material`,selectMaterial:`Material auswählen...`,subtype:`Untertyp`,brand:`Marke`,searchBrand:`Marke suchen...`,useCustomBrand:`"{{brand}}" verwenden`,useCustomMaterial:`Benutzerdefiniertes Material verwenden: {{material}}`,suggestedOptions:`Vorgeschlagen`,allOptions:`Alle`,colorName:`Farbname`,colorNamePlaceholder:`Jadeweiß, Feuerrot...`,color:`Farbe`,hexColor:`Hex-Farbe`,pickColor:`Benutzerdefinierte Farbe wählen`,labelWeight:`Nenngewicht`,coreWeight:`Leergewicht der Spule`,searchSpoolWeight:`Spulengewicht suchen...`,weightUsed:`Verbraucht`,currentWeight:`Restgewicht`,measuredWeight:`Gemessenes Gewicht`,spoolName:`Spule`,costPerKg:`Kosten pro kg`,storageLocation:`Lagerstandort`,temperature:`Temperatur`,humidity:`Luftfeuchtigkeit`,battery:`Batterie`,storageLocationPlaceholder:`z.B. Regal A, Schublade 1`,openInInventory:`Im Inventar öffnen`,measuredWeightError:`Das gemessene Gewicht muss zwischen {{min}}g und {{max}}g liegen.`,slicerFilament:`Slicer-Filament`,slicerFilamentName:`Slicer-Preset-Name`,slicerPreset:`Slicer-Preset`,searchPresets:`Filament-Presets suchen...`,selectedPreset:`Ausgewählt`,noPresetsFound:`Keine Presets gefunden`,tempOverrides:`Temperatur-Überschreibungen`,note:`Notiz`,notePlaceholder:`Zusätzliche Notizen zu dieser Spule...`,category:`Kategorie`,categoryPlaceholder:`z. B. Produktion, Prototyp, Kunde A`,categoryNone:`Ohne Kategorie`,storageLocationNone:`Kein Lagerort`,lowStockThresholdOverride:`Niedrigbestandsschwelle (diese Spule)`,lowStockThresholdOverrideHelp:`Leer lassen, um den globalen Schwellenwert ({{global}}%) zu verwenden.`,clearRfid:`RFID-Tag löschen`,rfidCleared:`RFID-Tag gelöscht`,archive:`Archivieren`,restore:`Wiederherstellen`,noSpools:`Noch keine Spulen. Fügen Sie Ihre erste Spule hinzu.`,noAvailableSpools:`Keine Spulen verfügbar. Fügen Sie eine Spule zum Inventar hinzu oder lösen Sie eine aus einem anderen Slot.`,kProfiles:`K-Profile`,addKProfile:`K-Profil hinzufügen`,assignSpool:`Spule zuweisen`,unassignSpool:`Zuweisung aufheben`,assignSuccess:`Spule zugewiesen und AMS-Slot konfiguriert`,assignPendingInsert:`Zugewiesen. Slot wird beim Einsetzen der Spule konfiguriert.`,assignFailed:`Spulenzuweisung fehlgeschlagen`,selectSpool:`Wählen Sie eine Spule für diesen Slot`,assigned:`Zugewiesen`,assigning:`Wird zugewiesen...`,searchSpools:`Spulen suchen...`,showAllSpools:`Alle Spulen anzeigen`,spoolmanSpools:`Spoolman-Spulen`,allMaterials:`Alle Materialien`,filterByBrand:`Nach Marke filtern...`,showArchived:`Archivierte anzeigen`,quickAdd:`Schnellerfassung (Lager)`,quantity:`Menge`,stock:`Lager`,configured:`Konfiguriert`,spoolsCreated:`{{count}} Spulen erstellt`,spoolsPartiallyCreated:`{{created}} von {{total}} Spulen erstellt (einige fehlgeschlagen)`,spoolCreated:`Spule erstellt`,spoolUpdated:`Spule aktualisiert`,spoolDeleted:`Spule gelöscht`,deepLinkSpoolNotFound:`Spule nicht gefunden`,deepLinkFetchFailed:`Spule konnte nicht geladen werden — bitte erneut versuchen`,spoolArchived:`Spule archiviert`,spoolRestored:`Spule wiederhergestellt`,kProfileSaveFailed:`K-Profil-Einstellungen konnten nicht gespeichert werden`,syncWeightSpoolNotFound:`Spule nicht gefunden — sie wurde möglicherweise gelöscht`,syncWeightSpoolmanUnreachable:`Spoolman ist nicht erreichbar — bitte später erneut versuchen`,syncWeightFailed:`Gewicht konnte nicht synchronisiert werden`,spoolmanUnreachable:`Spoolman ist nicht erreichbar — bitte später erneut versuchen`,deleteSpoolNotFound:`Spule nicht gefunden — sie wurde möglicherweise bereits gelöscht`,deleteFailed:`Spule konnte nicht gelöscht werden`,archiveSpoolNotFound:`Spule nicht gefunden — sie wurde möglicherweise bereits gelöscht`,archiveFailed:`Spule konnte nicht archiviert werden`,restoreSpoolNotFound:`Spule nicht gefunden — sie wurde möglicherweise bereits gelöscht`,restoreFailed:`Spule konnte nicht wiederhergestellt werden`,saveFailed:`Änderungen konnten nicht gespeichert werden`,tagClearFailed:`Tag konnte nicht gelöscht werden`,deleteConfirm:`Möchten Sie diese Spule wirklich löschen? Dies kann nicht rückgängig gemacht werden.`,archiveConfirm:`Möchten Sie diese Spule wirklich archivieren?`,advancedSettings:`Erweiterte Einstellungen`,filamentInfoTab:`Filament-Info`,paProfileTab:`PA-Profil`,colorAndCostTab:`Farbe & Kosten`,printersTab:`Drucker`,filamentInfo:`Filament`,additional:`Zusätzlich`,loadingPresets:`Cloud-Presets werden geladen...`,cloudConnected:`Cloud verbunden`,cloudNotConnected:`Cloud nicht verbunden (Standardwerte)`,recentColors:`Zuletzt`,searchColors:`Farben suchen...`,searchResults:`Suchergebnisse`,allColors:`Alle Farben`,commonColors:`Häufige Farben`,showLess:`Weniger`,showAll:`Alle`,noColorsFound:`Keine Farben gefunden`,noResults:`Keine Ergebnisse`,extraColorsLabel:`Zusätzliche Farben`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`2 bis 8 Hex-Stops, durch Kommas getrennt. Wird als Verlauf dargestellt.`,extraColorsInvalid:`Ungültige Hex-Werte ignoriert: {{tokens}}`,colorEffectLabel:`Effekt`,colorEffect:{none:`Keiner`,sparkle:`Glitzer`,wood:`Holz`,marble:`Marmor`,glow:`Leuchtend`,matte:`Matt`,silk:`Seide`,galaxy:`Galaxie`,rainbow:`Regenbogen`,metal:`Metallic`,translucent:`Lichtdurchlässig`,gradient:`Verlauf`,dualColor:`Zweifarbig`,triColor:`Dreifarbig`,multicolor:`Mehrfarbig`},selectMaterialFirst:`Bitte zuerst ein Material im Filament-Info Tab auswählen.`,noPrintersConfigured:`Keine Drucker konfiguriert. Fügen Sie Drucker hinzu.`,matchingFilter:`Filter`,anyBrand:`Jede Marke`,anyVariant:`Jede Variante`,autoSelect:`Auto-Auswahl`,matches:`Treffer`,match:`Treffer`,noMatches:`Keine Treffer`,connected:`Verbunden`,offline:`Offline`,printerOffline:`Drucker ist offline. Verbinden Sie ihn, um Kalibrierungsprofile anzuzeigen.`,noKProfilesMatch:`Keine K-Profile stimmen mit dem gewählten Filament überein.`,leftNozzle:`Linke Düse`,rightNozzle:`Rechte Düse`,profilesSelected:`Kalibrierungsprofil(e) ausgewählt`,filamentPreset:`Filament-Voreinstellung`,presetUseSpoolDefault:`Voreinstellung der Spule verwenden`,presetInherited:`geerbt`,presetOverride:`überschrieben`,presetNeedsModel:`Dieser Drucker hat sein Modell noch nicht gemeldet und kann daher keine eigene Voreinstellung haben.`,autoMatchPresets:`Automatisch zuordnen`,autoMatchPresetsHint:`Die Variante der Spulen-Voreinstellung suchen, die das jeweilige Modell nennt`,kProfilesPerPrinter:`K-Profile`,kProfileNotSet:`Nicht gesetzt`,kProfileFlowMismatch:`Dieses Profil wurde mit einer {{profile}}-Düse gemessen, eingebaut ist aber eine {{fitted}}-Düse — es wird daher nicht angewendet`,nozzle:`Düse`,unknownModel:`Unbekanntes Modell`,onePrinter:`1 Drucker`,nPrinters:`{{n}} Drucker`,filamentPresetsLoadFailed:`Die modellspezifischen Voreinstellungen dieser Spule konnten nicht geladen werden`,filamentPresetSaveFailed:`Die modellspezifischen Voreinstellungen konnten nicht gespeichert werden`,totalInventory:`Gesamtbestand`,totalConsumed:`Gesamtverbrauch`,byMaterial:`Nach Material`,inPrinter:`Im Drucker`,lowStock:`Niedriger Bestand`,sinceTracking:`Seit Beginn der Erfassung`,resetConsumedCounter:`Zähler zurücksetzen`,resetConsumedCounterTooltip:`Den verbrauchten Gramm-Zähler dieser Spule auf null setzen. Das Restgewicht bleibt unverändert.`,resetConsumedCounterConfirm:`Verbrauchten Gramm-Zähler dieser Spule auf 0 zurücksetzen? Künftige Drucke zählen wieder ab null. Die Spule selbst, ihre Restgewichtsberechnung und Ihre Einstellungen bleiben unverändert.`,resetAllConsumedCounters:`Alle Zähler zurücksetzen`,resetAllConsumedCountersTooltip:`Den verbrauchten Gramm-Zähler auf jeder Spule auf null setzen. Die Restgewichte bleiben unverändert.`,resetAllConsumedCountersConfirm:`Verbrauchten Gramm-Zähler auf allen {{count}} Spulen (archivierte eingeschlossen) auf 0 zurücksetzen? Das löscht den Wert „Insgesamt verbraucht“, sodass künftige Drucke wieder ab null gezählt werden. Spulen und Restgewichte bleiben unverändert.`,consumedCounterReset:`Zähler zurückgesetzt`,allConsumedCountersReset:`Zähler für {{count}} Spule(n) zurückgesetzt`,resetConsumedCounterFailed:`Zähler konnte nicht zurückgesetzt werden`,loadedInAms:`Im AMS/Ext geladen`,remaining:`Verbleibend`,weightCheck:`Gewichtskontrolle`,lastWeighed:`Zuletzt gewogen`,neverWeighed:`Nie gewogen`,search:`Spulen suchen...`,showing:`Zeige`,to:`bis`,of:`von`,show:`Zeige`,spools:`Spulen`,spool:`Spule`,page:`Seite`,noSpoolsMatch:`Keine Ergebnisse`,noSpoolsMatchDesc:`Versuchen Sie, Ihre Suche oder Filter anzupassen.`,active:`Aktiv`,archived:`Archiviert`,all:`Alle`,used:`Verwendet`,new:`Neu`,clearFilters:`Filter löschen`,table:`Tabelle`,cards:`Karten`,net:`Netto`,groupSimilar:`Gruppieren`,groupedSpools:`{{count}} identische Spulen`,groupedRows:`Zeilen`,columns:`Spalten`,configureColumns:`Spalten konfigurieren`,configureColumnsDesc:`Ziehen zum Neuordnen oder Pfeile verwenden. Sichtbarkeit mit dem Augensymbol umschalten.`,visible:`sichtbar`,reset:`Zurücksetzen`,cancel:`Abbrechen`,applyChanges:`Änderungen anwenden`,moveUp:`Nach oben`,moveDown:`Nach unten`,hideColumn:`Spalte ausblenden`,showColumn:`Spalte einblenden`,linkToSpool:`Mit Spule verknüpfen`,tagLinked:`Tag mit Spule verknüpft`,tagLinkFailed:`Tag-Verknüpfung fehlgeschlagen`,tagAlreadyLinked:`Tag bereits mit Spule #{{id}} verknüpft`,unknownTag:`Unbekannter RFID-Tag erkannt`,usageHistory:`Verbrauchshistorie`,noUsageHistory:`Noch kein Verbrauch erfasst`,printName:`Druckname`,weightConsumed:`Verbrauchtes Gewicht`,clearHistory:`Löschen`,historyCleared:`Verbrauchshistorie gelöscht`,fillSourceLabel:`(Inv)`,lowStockThresholdError:`Der Schwellenwert muss zwischen 0.1 und 99.9 liegen`,assignMismatchTitle:`Material stimmt nicht überein`,assignMismatchMessage:`Das ausgewählte Spulenmaterial "{{spoolMaterial}}" stimmt nicht mit dem Tray-Material "{{trayMaterial}}" für {{location}} überein. Trotzdem zuweisen?`,assignMismatchConfirm:`Trotzdem zuweisen`,assignPartialMismatchMessage:`Das Spulenmaterial "{{spoolMaterial}}" ist ähnlich, stimmt aber nicht genau mit "{{trayMaterial}}" in {{location}} überein. Möchten Sie fortfahren?`,assignProfileMismatchMessage:`Das Spulenprofil "{{spoolProfile}}" stimmt nicht mit dem Fachprofil "{{trayProfile}}" in {{location}} überein. Möchten Sie fortfahren?`,assignReconfigureNote:`Der AMS-Slot wird mit dem Profil der Spule neu konfiguriert.`,spoolmanFilamentCatalog:`Spoolman-Filamentkatalog`,pickFromSpoolmanCatalog:`Aus Spoolman-Katalog wählen…`,spoolmanFilamentSelected:`Filament aus Spoolman-Katalog ausgewählt`,spoolmanFilamentUnlinked:`Verknüpfung mit Filamentkatalog aufgehoben`,noSpoolmanFilaments:`Keine Filamente im Spoolman-Katalog gefunden`,spoolmanFilamentColorSwatch:`Filamentfarbe`,spoolWeightManagedBySpoolman:`Das Leerspulengewicht wird pro Filamenttyp in Spoolman verwaltet`,spoolmanCatalogLoadFailed:`Spoolman-Filamentkatalog konnte nicht geladen werden`},timelapse:{title:`Zeitraffer`,create:`Zeitraffer erstellen`,download:`Herunterladen`,delete:`Löschen`,preview:`Vorschau`,frameRate:`Bildrate`,quality:`Qualität`,processing:`Wird verarbeitet...`,noTimelapses:`Keine Zeitraffer verfügbar`},ams:{title:`AMS`,slot:`Slot`,empty:`Leer`,emptySlot:`Leerer Slot`,slotEmpty:`Leer`,slotUnconfigured:`?`,emptySlotReset:`Keine Spule zugewiesen`,unknown:`Unbekannt`,humidity:`Luftfeuchtigkeit`,temperature:`Temperatur`,filamentType:`Filamenttyp`,filamentColor:`Farbe`,remaining:`Verbleibend`,history:`AMS-Verlauf`,noHistory:`Kein Verlauf verfügbar`,configureSlot:`Slot konfigurieren`,externalSpool:`Externe Spule`,profile:`Profil`,kFactor:`K-Faktor`,kFactorShort:`K`,fill:`Füllstand`,configure:`Konfigurieren`,used:`verwendet`,remainingUnit:`verbleibend`},printModal:{variants:{editNote:`Diese Alternativen wurden beim Einreihen festgelegt. Zum Ändern abbrechen und neu einreihen.`,title:`Drucker-Alternativen`,help:`Ein Auftrag, ein Warteschlangenplatz. Der erste passende Drucker, der frei wird, druckt seine Datei.`,unknownModel:`Unbekanntes Modell`,plateFor:`Platte für {{filename}}`,moveUp:`Nach oben`,moveDown:`Nach unten`,queued:`Mit {{count}} Alternativen eingereiht`},selectPrinter:`Drucker auswählen`,selectPlate:`Platte auswählen`,filamentMapping:`Filamentzuordnung`,useArchiveMapping:`Zuordnung`,useArchiveMappingTooltip:`Jeden Steckplatz aus der mit diesem Archiv gespeicherten AMS-Zuordnung (vom Slicer) auswählen, anstatt nach Typ/Farbe abzugleichen.`,clickToChangeSlot:`Klicken, um die Steckplatzzuweisung zu ändern`,reRead:`Neu einlesen`,plateN:`Platte {{n}}`,plateFilamentsUnreadable:`Die Filamente einer ausgewählten Platte konnten nicht gelesen werden, sie lässt sich daher nicht zuordnen. Wähle sie ab, um die anderen einzureihen.`,totalCost:`Gesamtkosten:`,slotRemainingShort:` - {{grams}}g übrig`,printSettings:`Druckeinstellungen`,bedLeveling:`Bett-Nivellierung`,flowCalibration:`Fluss-Kalibrierung`,vibrationCalibration:`Vibrations-Kalibrierung`,layerInspection:`Erste-Schicht-Prüfung`,timelapse:`Zeitraffer`,cancel:`Abbrechen`,noPrintersAvailable:`Keine Drucker verfügbar`,printerBusy:`Drucker ist beschäftigt`,printerOffline:`Drucker ist offline`,sameTypeDifferentColor:`Gleicher Typ, andere Farbe`,filamentTypeNotLoaded:`Filamenttyp nicht geladen`,statusReady:`Bereit`,statusColorMismatch:`Farbe weicht ab`,statusTypeNotFound:`Typ nicht gefunden`,requiredTooltip:`Benötigt: {{name}} - {{color}}`,manuallySelected:`Manuell ausgewählt`,autoMatched:`Automatisch zugeordnet`,selectSlot:`Slot wählen`,sameTypeDifferentColorDetail:`Gleicher Typ, andere Farbe: benötigt {{required}}, im Slot ist {{loaded}}`,requiredTypeNotInPrinter:`Benötigter Filamenttyp im Drucker nicht gefunden.`,whenToPrint:`Wann drucken`,asap:`Sofort`,queue:`Warteschlange`,schedule:`Planen`,dateTime:`Datum & Uhrzeit`,invalidDateTime:`Bitte ein gültiges Datum und eine gültige Uhrzeit eingeben`,openCalendar:`Kalender öffnen`,requireManualStart:`Manuellen Start erfordern`,requirePreviousSuccess:`Nur starten, wenn der vorherige Druck erfolgreich war`,autoOffAfter:`Drucker nach Abschluss ausschalten`,helpAsap:`Der Druck wird oben in die Warteschlange eingefügt und startet, sobald ein geeigneter Drucker im Leerlauf ist.`,helpSchedule:`Der Druck startet zur geplanten Zeit, wenn der Drucker im Leerlauf ist. Wenn er belegt ist, wartet er, bis der Drucker verfügbar ist.`,helpQueue:`Der Druck wird hinten in die Warteschlange eingefügt.`,leftNozzle:`L`,rightNozzle:`R`,leftNozzleTooltip:`Linke Düse`,rightNozzleTooltip:`Rechte Düse`,ftsSameInletHint:`Alle Filamente für diesen Druck liegen an Filamentweiche IN-{{inlet}}. Wechsel zwischen Filamenten am selben Eingang dauern länger — verlege eines in ein AMS am anderen Eingang.`,rackPosition:`Wechslerposition`,rackPositionTooltip:`Welche Düse im Wechsler dieses Filament druckt. Die Positionen sind wie am Drucker nummeriert.`,rackEmptyPosition:`Diese Wechslerposition ist leer`,rackWrongNozzle:`Enthält eine {{has}}-Düse; dieses Filament benötigt {{needs}}`,filamentOverride:`Filament-Überschreibung`,filamentOverrideHint:`Filamente für modellbasierte Zuweisung optional überschreiben. Der Planer wird gegen die ausgewählten Filamente statt der ursprünglichen 3MF-Werte abgleichen.`,originalFilament:`Original`,overrideWith:`Ersetzen mit`,resetToOriginal:`Auf Original zurücksetzen`,insufficientFilamentTitle:`Nicht genug Filament`,waitingForAmsStatus:`Warte auf AMS-Status von {{printer}}…`,insufficientFilamentMessage:`Einige zugewiesene Spulen haben weniger Filament als dieser Druck benötigt:`,insufficientFilamentLine:`{{printer}} - {{slot}}: benötigt {{required}}g, verbleibend {{remaining}}g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: benötigt {{required}}g, {{remaining}}g über passende Spulen verfügbar (AMS Filament Backup)`,printAnyway:`Trotzdem drucken`,forceColorMatch:`Farbe erzwingen`,staggerPrinterStarts:`Druckerstarts staffeln`,staggerGroupSize:`Gruppengröße`,staggerInterval:`Intervall (Min.)`,staggerPreview:`{{printers}} Drucker → {{groups}} Gruppen à {{size}}, Start alle {{interval}} Min.`,staggerLastGroup:`letzte Gruppe: {{count}}`,staggerTotal:`insgesamt: {{minutes}} Min.`,staggerToPrinters:`Gestaffelt an {{count}} Drucker senden`,gcodeInjection:`Auto-Print G-code einfügen`,insufficientBudget:`Budget nicht ausreichend`,unlimitedNoBudget:`Unbegrenzt – es ist kein Budgetlimit festgelegt.`,noPrintableCostCenters:`Es ist keine aktive Kostenstelle zum Drucken verfügbar. Bitte einen Administrator, dir Druckzugriff zu gewähren.`},backup:{includesEncryptionKey:`Lokale Sicherungen enthalten die MFA-Schlüsseldatei (DATA_DIR/.mfa_encryption_key), damit ein Backup-ZIP selbstkonsistent ist. Behandle das ZIP als sensibel — wer Zugriff auf die Datei hat, kann die darin enthaltenen OIDC-Client-Secrets und TOTP-Geheimnisse entschlüsseln.`,title:`Sichern & Wiederherstellen`,createBackup:`Sicherung erstellen`,restoreBackup:`Sicherung wiederherstellen`,restoreDescription:`Alle Daten aus einer Sicherungsdatei ersetzen`,downloadBackup:`Sicherung herunterladen`,uploadBackup:`Sicherung hochladen`,lastBackup:`Letzte Sicherung`,autoBackup:`Automatische Sicherung`,backupNow:`Jetzt sichern`,restoreWarning:`Warnung: Das Wiederherstellen einer Sicherung überschreibt alle aktuellen Daten.`,includeArchives:`Archive einschließen`,includeSettings:`Einstellungen einschließen`,includeProfiles:`Profile einschließen`,backupSuccess:`Sicherung erfolgreich erstellt`,restoreSuccess:`Sicherung erfolgreich wiederhergestellt`,backupFailed:`Sicherung fehlgeschlagen`,restoreFailed:`Wiederherstellung fehlgeschlagen`,restoreNote:`Virtueller Drucker wird während der Wiederherstellung gestoppt`,githubBackup:`Git-Backup`,enabled:`Aktiviert`,cloudLoginRequired:`Bambu Cloud Login erforderlich. Melden Sie sich unter Profile → Cloud-Profile an, um GitHub-Backup zu aktivieren.`,cloudLoginRequiredShort:`Cloud-Login erforderlich`,githubDescription:`Synchronisieren Sie Ihre Profile automatisch mit einem privaten GitHub-Repository für Backup und Versionsverlauf.`,repoIsPrivate:`Repository ist privat — Sicherung möglich.`,repoIsPublicWarning:`Das Repository ist ÖFFENTLICH. Bambuddy-Backups enthalten MQTT-Zugangsdaten, Home-Assistant-Tokens, Prometheus-Tokens, Ihre Bambu-Cloud-E-Mail-Adresse und über K-Profile auch Drucker-Zugangscodes. Speichern ist blockiert, bis Sie das Repository in den Einstellungen Ihres Anbieters auf privat stellen.`,repoVisibilityUnknown:`Die Sichtbarkeit des Repositories konnte nicht bestimmt werden. Bambuddy sichert nur in Repositories, die nachweislich privat sind; Speichern wird blockiert.`,repositoryUrl:`Repository-URL`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Unsicheres HTTP erlauben`,allowInsecureHttpHint:`Für selbst gehostete Instanzen in privaten Netzwerken ohne TLS aktivieren`,personalAccessToken:`Persönlicher Zugriffstoken`,tokenSaved:`(gespeichert)`,enterNewToken:`Neuen Token eingeben zum Aktualisieren`,tokenHintGitHub:`Feingranularer Token mit Lese- und Schreibzugriff auf Contents oder klassischer Token mit dem Bereich repo.`,tokenHintGitLab:`Token mit dem Bereich api oder read_repository zusammen mit write_repository.`,tokenHintGitea:`Token mit dem Bereich write:repository.`,tokenHintForgejo:`Token mit dem Bereich write:repository. Ein Token, der nur für dieses eine Repository gilt, genügt.`,branch:`Branch`,provider:`Git-Anbieter`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Nur manuell`,hourly:`Stündlich`,daily:`Täglich`,weekly:`Wöchentlich`,includeInBackup:`In Sicherung einschließen`,kProfiles:`K-Profile`,kProfilesDescription:`Druckvorschub-Kalibrierung von verbundenen Druckern`,noPrintersConnected:`Keine Drucker verbunden`,printersConnected:`{{connected}}/{{total}} verbunden`,cloudProfiles:`Cloud-Profile`,cloudProfilesDescription:`Filament-, Drucker- und Prozessprofile aus Bambu Cloud und Orca Cloud`,cloudProfilesAccounts:`Verbundene Konten — Bambu Cloud: {{bambu}}, Orca Cloud: {{orca}}`,appSettings:`App-Einstellungen`,appSettingsDescription:`Bambuddy-Konfiguration (komplette Datenbank)`,spoolInventory:`Spulenbestand`,spoolInventoryDescription:`Filamentspulen, Nutzungsverlauf und Kostenverfolgung`,printArchives:`Druckarchive`,printArchivesDescription:`Druckverlauf-Metadaten (keine GCode/3MF-Dateien)`,lastBackupAt:`Letzte Sicherung:`,noBackupsYet:`Noch keine Sicherungen`,next:`Nächste:`,startingBackup:`Sicherung wird gestartet...`,test:`Test`,enableBackup:`Sicherung aktivieren`,testConnection:`Verbindung testen`,enterRepoUrl:`Repository-URL eingeben`,enterRepoAndToken:`Repository-URL und Zugriffstoken eingeben`,repoRequired:`Repository-URL ist erforderlich`,tokenRequired:`Zugriffstoken ist erforderlich`,githubBackupEnabled:`GitHub-Backup aktiviert`,tokenUpdated:`Token aktualisiert`,settingsSaved:`Einstellungen gespeichert`,failedToSave:`Speichern fehlgeschlagen: {{message}}`,backupCompleteFiles:`Sicherung abgeschlossen - {{count}} Dateien aktualisiert`,backupSkippedNoChanges:`Sicherung übersprungen - keine Änderungen`,backupFailed2:`Sicherung fehlgeschlagen: {{message}}`,clearedLogs:`{{count}} Protokolle gelöscht`,failedToClearLogs:`Protokolle löschen fehlgeschlagen: {{message}}`,restoreFromGit:{button:`Aus Git wiederherstellen`,title:`Aus Git-Backup wiederherstellen`,subtitle:`Commit auswählen und festlegen, was wiederhergestellt wird`,commitLabel:`Backup-Commit`,latestCommit:`Neuestes Backup (Branch-Spitze)`,categoriesLabel:`Was wiederherstellen`,inspecting:`Backup-Inhalt wird gelesen...`,itemCount:`{{count}} im Backup`,overwriteLabel:`Vorhandene Einträge überschreiben`,overwriteOn:`Vorhandene Einträge werden aus dem Backup aktualisiert.`,overwriteOff:`Es werden nur fehlende Einträge ergänzt; vorhandene bleiben unverändert.`,selectedCount:`{{count}} ausgewählt`,restoring:`Wird wiederhergestellt...`,confirmTitle:`Aus Backup wiederherstellen?`,confirmMessage:`Die ausgewählten Kategorien werden aus diesem Commit wiederhergestellt. Fehlende Einträge werden ergänzt, vorhandene bleiben unverändert.`,confirmMessageOverwrite:`Die ausgewählten Kategorien werden aus diesem Commit wiederhergestellt und lokal vorhandene Einträge überschrieben. Dies kann nicht rückgängig gemacht werden.`,kprofilesOverwriteCaveat:`K-Profile sind die Ausnahme: Das Schreiben eines Slots ersetzt immer die Kalibrierung auf dem Drucker.`,tally:`{{restored}} wiederhergestellt, {{skipped}} übersprungen, {{failed}} fehlgeschlagen`,reloadHint:`Bambuddy neu laden, damit die wiederhergestellten Daten überall erscheinen.`,partialHint:`Die oben aufgeführten Kategorien wurden abgeschlossen und sind gespeichert. Fehlende Kategorien wurden nicht ausgeführt.`,failed:`Wiederherstellung fehlgeschlagen.`,loadFailed:`Das Backup-Repository konnte nicht gelesen werden.`,details:{notPresent:`In diesem Backup-Commit nicht vorhanden`,unreadableJson:`Unlesbares JSON: {{paths}}`,settingsNoPayload:`Keine Einstellungen in den Daten`,settingsCredentialsWillSkip:`{{count}} zugangsdatenähnliche Schlüssel werden übersprungen`,settingsCompanionWillSkip:`{{count}} zugangsdatenähnliche Schlüssel werden übersprungen und {{companion}} davon abhängige Schalter bleiben aus`,settingsCompanionOnlyWillSkip:`{{companion}} Schalter bleiben aus - die dafür nötigen Zugangsdaten können nicht aus einem Backup wiederhergestellt werden`,spoolsUsageCount:`davon {{count}} Verbrauchseinträge`,archivesMetadataOnly:`Nur Metadaten - 3MF-Dateien und Vorschaubilder sind nicht im Git-Backup enthalten`,kprofilesPrinterCount:`über {{count}} Drucker`},notes:{noData:`Keine Daten dieser Art in diesem Backup`,archivesPrinterMissing:`Einige Archive verwiesen auf nicht mehr vorhandene Drucker - Verknüpfung entfernt`,archivesProjectMissing:`Einige Archive verwiesen auf nicht mehr vorhandene Projekte - Verknüpfung entfernt`,archivesOwnerCleared:`Einige Archive verwiesen auf nicht mehr vorhandene Benutzer - Eigentümer entfernt. Sie sind daher nur für Benutzer mit der Berechtigung archives:read_all sichtbar, bis ein Administrator sie neu zuweist`,archivesOwnerUnmatched:`Einige Archive nennen einen Eigentümer, den es auf dieser Instanz nicht gibt - der Eigentümer wurde entfernt statt aus der Benutzer-ID der Sicherung geraten. Sie sind daher nur für Benutzer mit der Berechtigung archives:read_all sichtbar, bis ein Administrator sie neu zuweist`,archivesOwnerUnknown:`Einige Archive wurden ohne Eigentümer wiederhergestellt - diese Sicherung enthält keinen, daher sind sie nur für Benutzer mit der Berechtigung archives:read_all sichtbar, bis ein Administrator sie neu zuweist`,archivesUndeleted:`Seit dem Backup gelöschte Archive sind wieder sichtbar - Überschreiben war aktiv`,archivesMetadataOnly:`Wiederhergestellte Archive enthalten nur Metadaten - die 3MF- und Vorschaudateien sind nicht im Git-Backup enthalten`,spoolUsageUnresolved:`{{count}} Verbrauchseinträge übersprungen - ihre Spule ist nicht in der Spulenliste dieses Backups, es gibt also nichts, woran sie hängen könnten.`,spoolUsageUnlinked:`{{count}} Verbrauchseinträge ohne Verknüpfung zum Druckverlauf wiederhergestellt - wählen Sie Druckarchive zusammen mit dem Spulenbestand, um sie zu behalten.`,spoolTagKept:`{{count}} Spulen-Tags unverändert gelassen - das Backup hätte einen inzwischen gescannten Tag gelöscht oder ihn auf eine zweite Spule verschoben.`,settingsCredentialsSkipped:`{{count}} zugangsdatenähnliche Schlüssel übersprungen - Geheimnisse bitte manuell erneut eingeben`,settingsAuthSkipped:`{{count}} Authentifizierungseinstellungen übersprungen - ändern Sie diese unter Einstellungen > Authentifizierung, damit die Aussperrprüfungen greifen`,settingsCompanionSkipped:`{{keys}} bleiben ausgeschaltet - die jeweils benötigten Zugangsdaten lassen sich nicht aus einem Backup wiederherstellen und sind auf dieser Instanz nicht hinterlegt, ein Einschalten würde die Integration also ohne Authentifizierung lassen`,settingsMqttRelayFailed:`MQTT-Einstellungen wiederhergestellt, aber das Relay konnte nicht neu verbunden werden - Bambuddy neu starten`,kprofilesAlwaysOverwrite:`K-Profile überschreiben immer den passenden Slot auf dem Drucker`,kprofilesAckUnreliable:`Ein Drucker, der nicht antwortet, zählt weiterhin als wiederhergestellt - überprüfen Sie die Profile am Drucker`,kprofilesPrinterMissing:`Kein Drucker mit der Seriennummer {{serial}} - übersprungen`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) ist nicht verbunden - übersprungen`,kprofilesUnknownNozzle:`Unerwarteter Düsendurchmesser {{nozzle}} für {{serial}} - unverändert gesendet`,kprofilesUnmatched:`{{count}} Profile für {{nozzle}} hatten kein Gegenstück auf {{printer}} - als neue Profile hinzugefügt`,kprofilesSendFailed:`{{nozzle}}-Profile konnten nicht an {{printer}} ({{serial}}) gesendet werden`,kprofilesRefused:`{{printer}} ({{serial}}) hat die {{nozzle}}-Profile abgelehnt: {{reason}}`,kprofilesStepFailed:`Der K-Profil-Schritt konnte nicht abgeschlossen werden - {{reason}}. Was zuvor wiederhergestellt wurde, ist trotzdem gespeichert.`}},history:`Verlauf`,clear:`Löschen`,date:`Datum`,status:`Status`,trigger:`Typ`,triggers:{manual:`Sicherung (manuell)`,scheduled:`Sicherung (geplant)`,restore:`Wiederherstellung`},commit:`Commit`,localBackup:`Lokale Sicherung`,localBackupDescription:`Erstellen Sie eine vollständige Sicherung Ihrer Bambuddy-Daten einschließlich Datenbank, Archive, Uploads und aller Dateien.`,downloadBackupLabel:`Sicherung herunterladen`,completeBackupZip:`Vollständige Sicherung: Datenbank + alle Dateien (ZIP)`,download:`Herunterladen`,preparingBackup:`Sicherung wird vorbereitet...`,creatingArchive:`Sicherungsarchiv wird erstellt... Dies kann bei großen Archiven eine Weile dauern.`,downloadingFile:`Sicherungsdatei wird heruntergeladen...`,backupDownloaded:`Sicherung erfolgreich heruntergeladen`,failedToCreateBackup:`Sicherung erstellen fehlgeschlagen: {{message}}`,restore:`Wiederherstellen`,restoreReplacesAll:`Wiederherstellung ersetzt alle Daten.`,restoreReplacesAllDetail:`Ihre aktuelle Datenbank und Dateien werden vollständig ersetzt. Nach der Wiederherstellung ist ein Neustart erforderlich.`,restoreConfirmTitle:`Sicherung wiederherstellen`,restoreConfirmMessage:`Sind Sie sicher, dass Sie von "{{filename}}" wiederherstellen möchten? Dies ersetzt Ihre aktuelle Datenbank und alle Dateien vollständig. Die Anwendung muss nach der Wiederherstellung neu gestartet werden.`,restoreConfirmButton:`Sicherung wiederherstellen`,uploadingFile:`Sicherungsdatei wird hochgeladen...`,backupRestoredRestart:`Sicherung wiederhergestellt. Bitte starten Sie Bambuddy neu.`,failedToRestore:`Sicherung wiederherstellen fehlgeschlagen. Bitte überprüfen Sie das Dateiformat.`,reloadNow:`Jetzt neu laden`,creatingBackup:`Sicherung erstellen`,restoringBackup:`Sicherung wiederherstellen`,preparing:`Vorbereiten...`,processing:`Verarbeiten...`,doNotClosePage:`Bitte schließen Sie diese Seite nicht und navigieren Sie nicht weg. Dieser Vorgang kann bei großen Sicherungen mehrere Minuten dauern.`,restoring:`Wiederherstellen...`,restoreComplete:`Wiederherstellung abgeschlossen`,restoreFailed2:`Wiederherstellung fehlgeschlagen`,importSettings:`Einstellungen aus einer Sicherungsdatei importieren`,pleaseWaitRestoring:`Bitte warten Sie, während Ihre Daten wiederhergestellt werden`,selectBackupFile:`Klicken Sie, um eine Sicherungsdatei auszuwählen (.json oder .zip)`,duplicateHandling:`So funktioniert die Duplikatbehandlung:`,matchPrinters:`Drucker`,matchPrintersBy:`abgeglichen nach Seriennummer`,matchSmartPlugs:`Smart Plugs`,matchSmartPlugsBy:`abgeglichen nach IP-Adresse`,matchNotificationProviders:`Benachrichtigungsanbieter`,matchNotificationProvidersBy:`abgeglichen nach Name`,matchFilaments:`Filamente`,matchFilamentsBy:`abgeglichen nach Name + Typ + Marke`,matchArchives:`Archive`,matchArchivesBy:`abgeglichen nach Inhaltshash (immer übersprungen)`,matchPendingUploads:`Ausstehende Uploads`,matchPendingUploadsBy:`abgeglichen nach Dateiname`,matchSettingsTemplates:`Einstellungen & Vorlagen`,matchSettingsTemplatesBy:`immer überschrieben`,replaceExisting:`Vorhandene Daten ersetzen`,keepExisting:`Vorhandene Daten behalten`,overwriteDescription:`Bereits vorhandene Elemente mit Sicherungsdaten überschreiben`,keepDescription:`Nur Elemente wiederherstellen, die noch nicht vorhanden sind`,overwriteCaution:`Achtung:`,overwriteWarning:`Das Überschreiben ersetzt Ihre aktuellen Konfigurationen durch Daten aus der Sicherung. Drucker-Zugangscodes werden aus Sicherheitsgründen nie überschrieben.`,cancel:`Abbrechen`,processingBackup:`Sicherungsdatei wird verarbeitet...`,itemsRestored:`Wiederhergestellt`,itemsSkipped:`Übersprungen`,restored:`Wiederhergestellt`,skippedAlreadyExist:`Übersprungen (bereits vorhanden)`,filesCategory:`Dateien (3MF, Thumbnails, etc.)`,andMore:`...und {{count}} weitere`,newApiKeysGenerated:`Neue API-Schlüssel generiert`,keysShownOnce:`Diese Schlüssel werden nur einmal angezeigt. Kopieren Sie sie jetzt!`,copy:`Kopieren`,noDataFound:`In der Sicherungsdatei wurden keine Daten zur Wiederherstellung gefunden.`,close:`Schließen`,scheduledBackup:`Geplante Backups`,scheduledBackupDescription:`Backup-Snapshots automatisch nach Zeitplan erstellen. Ausgabeverzeichnis kann auf einen NAS oder externen Speicher gemountet werden.`,frequency:`Frequenz`,backupTime:`Zeit`,retention:`Aufbewahrung`,retentionDescription:`Anzahl der zu behaltenden Backups`,outputPath:`Ausgabepfad`,outputPathPlaceholder:`Standard: {{path}}`,outputPathDescription:`Leer lassen für den Standardort`,runNow:`Jetzt ausführen`,backupFiles:`Backup-Dateien`,noScheduledBackups:`Noch keine Backups`,deleteBackup:`Löschen`,deleteBackupConfirm:`Diese Backup-Datei löschen?`,backupRunning:`Backup läuft...`,scheduledBackupComplete:`Backup erfolgreich abgeschlossen`,scheduledBackupFailed:`Backup fehlgeschlagen`,nextBackup:`Nächstes Backup`,backupSize:`Größe`,localTimeHint:`Ortszeit ({{tz}})`,defaultPathLabel:`Standard:`,pathCheck:{title:`Bambuddy kann nicht in dieses Verzeichnis schreiben`,howToFix:`So beheben Sie das:`,sandboxed:`Der Bambuddy-Dienst kann nicht nach {{path}} schreiben. Seine systemd-Unit läuft mit ProtectSystem=strict, wodurch jedes Verzeichnis außerhalb der Installations-, Daten- und Log-Verzeichnisse für den Dienst schreibgeschützt ist - auch eines, in das Sie aus Ihrer eigenen Shell schreiben können.`,read_only:`{{path}} liegt auf einem schreibgeschützten Dateisystem.`,permission_denied:`Bambuddy darf nicht nach {{path}} schreiben. Prüfen Sie Eigentümer und Rechte des Verzeichnisses.`,no_space:`Das Dateisystem, auf dem {{path}} liegt, ist voll.`,not_a_directory:`{{path}} existiert, ist aber kein Verzeichnis.`,missing:`{{path}} existiert nicht und konnte nicht angelegt werden.`,error:`Bambuddy kann nicht nach {{path}} schreiben.`,ephemeralTitle:`Diese Backups überleben einen Container-Neustart nicht`,container_ephemeral:`{{path}} liegt im Bambuddy-Container, nicht auf dem Host. Dort geschriebene Backups gehen verloren, sobald der Container neu erstellt wird. Binden Sie das Verzeichnis vom Host ein:`},categories:{settings:`Einstellungen`,notification_providers:`Benachrichtigungsanbieter`,notification_templates:`Benachrichtigungsvorlagen`,smart_plugs:`Smart Plugs`,printers:`Drucker`,filaments:`Filamente`,maintenance_types:`Wartungstypen`,archives:`Archive`,projects:`Projekte`,pending_uploads:`Ausstehende Uploads`,external_links:`Externe Links`,api_keys:`API-Schlüssel`}},tags:{title:`Tags`,addTag:`Tag hinzufügen`,editTag:`Tag bearbeiten`,deleteTag:`Tag löschen`,tagName:`Tag-Name`,tagColor:`Tag-Farbe`,noTags:`Keine Tags`,deleteConfirm:`Möchten Sie diesen Tag wirklich löschen?`,manageTags:`Tags verwalten`},uploadModal:{title:`3MF-Dateien hochladen`,dragDrop:`3MF-Dateien hierher ziehen`,or:`oder`,browseFiles:`Dateien durchsuchen`,extractionInfo:`Das Druckermodell wird automatisch aus den 3MF-Datei-Metadaten extrahiert.`,uploaded:`hochgeladen`,failed:`fehlgeschlagen`,uploading:`Wird hochgeladen...`,upload:`Hochladen`,uploadFailed:`Hochladen fehlgeschlagen`},editArchive:{title:`Archiv bearbeiten`,name:`Name`,namePlaceholder:`Druckname`,printer:`Drucker`,noPrinter:`Kein Drucker`,project:`Projekt`,noProject:`Kein Projekt`,itemsPrinted:`Gedruckte Teile`,itemsPrintedHelp:`Anzahl der in diesem Druckauftrag produzierten Teile. 0, wenn die ganze Platte unbrauchbar war.`,filamentUsed:`Verbrauchtes Filament (g)`,filamentUsedPlaceholder:`z. B. 46.16`,filamentUsedHelp:`Von Hand eintragen, wenn ein Druck ohne 3MF archiviert wurde, damit er in die Filament-Summen eingeht. Beim erneuten Einlesen eines Archivs mit 3MF wird der Wert wieder aus der Datei übernommen.`,notes:`Notizen`,notesPlaceholder:`Notizen zu diesem Druck hinzufügen...`,externalLink:`Externer Link`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Link zu Printables, Thingiverse oder anderer Quelle`,tags:`Tags`,tagsPlaceholder:`Tags hinzufügen...`,addMoreTags:`Weitere Tags hinzufügen...`,matchingTags:`Übereinstimmend mit "{{query}}"`,existingTags:`Vorhandene Tags`,clickToAdd:`(zum Hinzufügen klicken)`,status:`Status`,failureReason:`Fehlergrund`,selectReason:`Grund auswählen...`,photos:`Fotos des Druckergebnisses`,photosHelp:`Klicken Sie auf + um Fotos Ihres Druckergebnisses hinzuzufügen`,printResult:`Druckergebnis`,saving:`Wird gespeichert...`,failureReasons:{adhesionFailure:`Haftungsfehler`,spaghettiDetached:`Spaghetti / Abgelöst`,layerShift:`Schichtversatz`,cloggedNozzle:`Verstopfte Düse`,filamentRunout:`Filament aufgebraucht`,warping:`Verformung`,stringing:`Fadenziehen`,underExtrusion:`Unterextrusion`,powerFailure:`Stromausfall`,userCancelled:`Vom Benutzer abgebrochen`,noStatusUpdate:`Kein Statusupdate empfangen`,other:`Sonstiges`},statuses:{completed:`Abgeschlossen`,failed:`Fehlgeschlagen`,aborted:`Abgebrochen`,printing:`Druckt`}},kProfiles:{title:`K-Profile`,noPrintersConfigured:`Keine Drucker konfiguriert`,addPrinterInSettings:`Fügen Sie einen Drucker in den Einstellungen hinzu, um K-Profile zu verwalten`,noActivePrinters:`Keine aktiven Drucker`,enablePrinterConnection:`Aktivieren Sie eine Druckerverbindung, um K-Profile anzuzeigen`,loadingProfiles:`Lade K-Profile...`,printerOffline:`Drucker offline`,printerOfflineDesc:`Der ausgewählte Drucker ist nicht verbunden. Schalten Sie ihn ein, um K-Profile anzuzeigen.`,noMatchingProfiles:`Keine passenden Profile`,noMatchingProfilesDesc:`Keine Profile entsprechen Ihren Suchkriterien`,noKProfiles:`Keine K-Profile`,noKProfilesDesc:`Keine Druckvorschub-Profile für {{diameter}}mm Düse gefunden`,createFirstProfile:`Erstes Profil erstellen`,printer:`Drucker`,nozzle:`Düse`,refresh:`Aktualisieren`,addProfile:`Profil hinzufügen`,export:`Exportieren`,import:`Importieren`,select:`Auswählen`,selectAll:`Alle auswählen`,delete:`Löschen`,searchPlaceholder:`Nach Name oder Filament suchen...`,allExtruders:`Alle Extruder`,leftOnly:`Nur links`,rightOnly:`Nur rechts`,allFlow:`Alle Flusstypen`,hfOnly:`Nur HF`,sOnly:`Nur S`,sortName:`Sortieren: Name`,sortKValue:`Sortieren: K-Wert`,sortFilament:`Sortieren: Filament`,leftExtruder:`Linker Extruder`,rightExtruder:`Rechter Extruder`,modal:{addTitle:`K-Profil hinzufügen`,editTitle:`K-Profil bearbeiten`,profileName:`Profilname`,profileNamePlaceholder:`Mein PLA-Profil`,kValue:`K-Wert`,kValuePlaceholder:`0,020`,kValueHelp:`Typischer Bereich: 0,01 - 0,06 für PLA, 0,02 - 0,10 für PETG`,filament:`Filament`,selectFilament:`Filament auswählen...`,source:{local:`Importiert`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Integriert`},noFilamentsHelp:`Keine Filamente verfügbar. Melde dich bei Bambu Cloud an oder importiere Presets unter Profile → Lokale Profile.`,searchFilaments:`Filamente durchsuchen...`,noFilamentMatches:`Kein Filament passt zu dieser Suche`,flowType:`Flusstyp`,highFlow:`Hoher Durchfluss`,standard:`Standard`,nozzleSize:`Düsengröße`,extruder:`Extruder`,extruders:`Extruder`,left:`Links`,right:`Rechts`,notes:`Notizen (lokal gespeichert)`,notesPlaceholder:`Notizen zu diesem Profil hinzufügen...`,notesHelp:`Notizen werden in Bambuddy gespeichert, nicht auf dem Drucker`,syncing:`Synchronisiert mit Drucker...`,savingExtruder:`Speichern auf Extruder {{current}}/{{total}}...`,pleaseWait:`Bitte warten`},deleteConfirm:{title:`Profil löschen`,cannotUndo:`Dies kann nicht rückgängig gemacht werden`,message:`Möchten Sie "{{name}}" wirklich vom Drucker löschen?`},bulkDelete:{title:`Profile löschen`,cannotUndo:`Dies kann nicht rückgängig gemacht werden`,message:`Möchten Sie wirklich {{count}} ausgewählte Profile vom Drucker löschen?`},toast:{profileSaved:`K-Profil gespeichert`,profilesSaved:`K-Profil auf {{count}} Extrudern gespeichert`,selectAtLeastOneExtruder:`Bitte wählen Sie mindestens einen Extruder aus`,selectFilament:`Bitte zuerst ein Filament auswählen`,filamentNotResolvable:`Keine Bambu-Filament-ID für {{name}} — der Drucker kann dafür kein Profil speichern`,profileDeleted:`K-Profil gelöscht`,profilesDeleted:`{{count}} Profile gelöscht`,exportedProfiles:`{{count}} Profile exportiert`,importedProfiles:`{{count}} von {{total}} Profilen importiert`,noProfilesToExport:`Keine Profile zum Exportieren`,invalidFileFormat:`Ungültiges Dateiformat`,failedToParseImport:`Import-Datei konnte nicht gelesen werden`,failedToSaveBatch:`K-Profile konnten nicht gespeichert werden`,noteSaved:`Notiz gespeichert`,failedToSaveNote:`Notiz konnte nicht gespeichert werden`},permission:{noRead:`Sie haben keine Berechtigung, Profile zu aktualisieren`,noCreate:`Sie haben keine Berechtigung, Profile hinzuzufügen`,noUpdate:`Sie haben keine Berechtigung, K-Profile zu aktualisieren`,noDelete:`Sie haben keine Berechtigung, K-Profile zu löschen`,noExport:`Sie haben keine Berechtigung, Profile zu exportieren`,noImport:`Sie haben keine Berechtigung, Profile zu importieren`}},virtualPrinter:{title:`Virtueller Drucker`,running:`Läuft`,stopped:`Gestoppt`,description:{default:`Aktiviere einen virtuellen Drucker, der in Bambu Studio und OrcaSlicer erscheint. Dateien, die an diesen Drucker gesendet werden, werden direkt archiviert ohne zu drucken.`,proxy:`Aktiviere einen Proxy, der Slicer-Datenverkehr an einen echten Drucker weiterleitet, um Ferndruck über jedes Netzwerk zu ermöglichen.`},enable:{title:`Virtuellen Drucker aktivieren`,visibleInSlicer:`Sichtbar als "Bambuddy" in der Slicer-Erkennung`,proxyingTo:`Proxy zu {{name}}`,notActive:`Nicht aktiv`},model:{title:`Druckermodell`,description:`Wähle welches Druckermodell emuliert werden soll.`,restartWarning:`Das Ändern des Modells startet den virtuellen Drucker neu`},accessCode:{title:`Zugangscode`,isSet:`Zugangscode ist gesetzt`,notSet:`Kein Zugangscode gesetzt - erforderlich zum Aktivieren`,placeholder:`8-Zeichen-Code eingeben`,placeholderChange:`Neuen Code eingeben zum Ändern`,hint:`Muss genau 8 Zeichen lang sein. Wird von Slicern zur Authentifizierung verwendet.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Vom Zieldrucker übernommen`,derivedFromTargetHint:`Verwendet den Zugangscode des Zieldruckers. Die Brücke leitet die Slicer-Authentifizierung an den echten Drucker weiter, daher müssen die Codes übereinstimmen — den Druckercode in dessen Einstellungen ändern.`,reveal:`Zugangscode anzeigen`,hide:`Zugangscode verbergen`},targetPrinter:{title:`Zieldrucker`,configured:`Proxy-Ziel konfiguriert`,notConfigured:`Kein Zieldrucker ausgewählt - erforderlich für Proxy-Modus`,placeholder:`Drucker auswählen...`,hint:`Wähle den Drucker aus, an den der Slicer-Datenverkehr weitergeleitet werden soll. Der Drucker muss im LAN-Modus sein.`,noPrinters:`Keine Drucker konfiguriert. Füge zuerst einen Drucker hinzu, um den Proxy-Modus zu verwenden.`},remoteInterface:{title:`Netzwerkschnittstelle überschreiben`,configured:`Schnittstellenüberschreibung aktiv`,optional:`Optional - verwenden wenn die automatisch erkannte IP falsch ist (z.B. mehrere NICs, Docker, VPN)`,placeholder:`Automatisch erkennen (Standard)...`,hint:`Überschreibt die per SSDP beworbene und im TLS-Zertifikat verwendete IP-Adresse. Nützlich wenn Bambuddy mehrere Netzwerkschnittstellen hat.`},mode:{title:`Modus`,archive:`Archivieren`,archiveDesc:`Dateien sofort archivieren`,review:`Überprüfen`,reviewDesc:`Vor dem Archivieren überprüfen`,queue:`Warteschlange`,queueDesc:`Archivieren und zur Warteschlange hinzufügen`,proxy:`Proxy`,proxyDesc:`An echten Drucker weiterleiten`},autoDispatch:{title:`Automatisch starten`,description:`Drucke automatisch starten, wenn sie zur Warteschlange hinzugefügt werden. Wenn deaktiviert, warten Drucke auf manuellen Start.`},queueForceColorMatch:{title:`Farbabgleich erzwingen`,description:`Druckaufträge nur an Drucker senden, bei denen der genaue Filament-Typ und die genaue Farbe geladen sind. Standardmäßig deaktiviert — ohne diese Option verwendet die Warteschlange nur den Drucker-Modell-Abgleich und wählt möglicherweise einen Drucker mit der falschen Farbe.`},saveAmsMapping:{title:`AMS-Zuordnung speichern`,description:`Speichert die vom Slicer selbst gewählte AMS-Steckplatz-Zuordnung (aus dem MQTT-Befehl project_file) im Archiv, sodass ein späterer erneuter Druck dieselbe physische Spule verwendet, anstatt sie erneut aus Typ/Farbe der Datei abzuleiten. Standardmäßig deaktiviert.`},gcodeInjection:{title:`G-code-Injektion`,description:`Wendet die in den Einstellungen pro Modell konfigurierten G-code-Snippets auf Jobs dieses VP an. Standardmäßig aus.`},tailscaleDisabled:{title:`Tailscale-Integration`,description:`Aktivieren, um diesen VP als per Tailscale erreichbar zu markieren. Zeigt die Tailscale-Adresse des Hosts an, damit du weißt, welche IP du im Slicer eintragen musst. Der CA-Import bleibt unverändert — diese Option hat keinen Einfluss auf Zertifikate.`},setupRequired:{title:`Einrichtung erforderlich`,description:`Die virtuelle Druckerfunktion erfordert zusätzliche Systemkonfiguration, bevor sie funktioniert. Dies beinhaltet Portweiterleitung, Firewall-Regeln und plattformspezifische Einstellungen.`,readGuide:`Lese die Einrichtungsanleitung vor dem Aktivieren`},archiveNameSource:{title:`Quelle des Archivnamens`,description:`Lege fest, wie neue Archive benannt werden, wenn Dateien über den virtuellen Drucker eintreffen. "Metadaten" verwendet den im 3MF eingebetteten Titel des Slicers (Standard). "Dateiname" nutzt den Dateinamen, den Bambu Studio per FTP gesendet hat. Hinweis: Bambu Studio überschreibt den im Dialog "Zum Drucker senden" eingegebenen Namen mit dem Titelfeld der 3MF, sofern eines vorhanden ist — beide Modi liefern daher oft denselben Wert.`,metadata:`Metadaten`,filename:`Dateiname`},caCert:{title:`Slicer-Zertifikat`,description:`Virtuelle Drucker verwenden ein TLS-Zertifikat, das von der Bambuddy-CA signiert ist. Importieren Sie dieses CA-Zertifikat einmalig in den Vertrauensspeicher Ihres Slicers, damit er die Verbindung akzeptiert — kein Abrufen über die Kommandozeile mehr nötig.`,copy:`Kopieren`,copied:`Kopiert`,download:`Herunterladen`,fingerprint:`SHA-256`},howItWorks:{title:`So funktioniert es`,step1:`Im selben LAN erscheinen virtuelle Drucker automatisch in deinem Slicer (Bambu Studio / OrcaSlicer). Aus anderen Netzwerken füge sie manuell per IP-Adresse und Zugangscode hinzu.`,step2:`Im Archiv-, Überprüfungs- und Warteschlangen-Modus verwende die "Senden"-Funktion im Slicer, um 3MF-Dateien an Bambuddy zu senden. Der Slicer zeigt "Druck erfolgreich" — die Datei wird gespeichert, nicht gedruckt.`,step3:`Im Proxy-Modus leitet der virtuelle Drucker den gesamten Datenverkehr an einen echten Drucker weiter — Drucke starten sofort wie bei einer direkten Verbindung.`},status:{title:`Status-Details`,printerName:`Druckername`,model:`Modell`,serialNumber:`Seriennummer`,mode:`Modus`,pendingFiles:`Ausstehende Dateien`,targetPrinter:`Zieldrucker`,ftpPort:`FTP-Port`,mqttPort:`MQTT-Port`,ftpConnections:`FTP-Verbindungen`,mqttConnections:`MQTT-Verbindungen`},toast:{updated:`Virtuelle Druckereinstellungen aktualisiert`,failedToUpdate:`Einstellungen konnten nicht aktualisiert werden`,copyFailed:`Kopieren fehlgeschlagen — bitte Text manuell markieren`,accessCodeRequired:`Bitte zuerst einen Zugangscode setzen`,targetPrinterRequired:`Bitte zuerst einen Zieldrucker auswählen`,bindIpRequired:`Bitte zuerst eine Bind-IP setzen`,accessCodeEmpty:`Zugangscode darf nicht leer sein`,accessCodeLength:`Zugangscode muss genau 8 Zeichen lang sein`,targetCodeChangedRebind:`Zugangscode wurde an den neuen Zieldrucker angepasst. Bitte dieses Gerät im Slicer neu hinzufügen, damit der neue Code übernommen wird.`,created:`Virtueller Drucker erstellt`,failedToCreate:`Virtueller Drucker konnte nicht erstellt werden`,deleted:`Virtueller Drucker gelöscht`,failedToDelete:`Virtueller Drucker konnte nicht gelöscht werden`},list:{title:`Virtuelle Drucker`,add:`Hinzufügen`,addFirst:`Virtuellen Drucker hinzufügen`,empty:`Keine virtuellen Drucker konfiguriert. Fügen Sie einen hinzu, um zu beginnen.`},bindIp:{title:`Bind-Interface`,placeholder:`Interface auswählen...`,hint:`Netzwerkinterface, an das dieser virtuelle Drucker gebunden wird. Muss pro Drucker eindeutig sein.`},proxy:{accessCodeHint:`Im Proxy-Modus den Zugangscode des Zieldruckers im Slicer verwenden. Die Verbindung wird transparent zum echten Drucker weitergeleitet.`},addDialog:{title:`Virtuellen Drucker hinzufügen`,name:`Name`,hint:`Sie können Zugangscode, Zieldrucker und andere Einstellungen nach dem Erstellen konfigurieren.`,create:`Erstellen`},deleteConfirm:{title:`Virtuellen Drucker löschen`,message:`Möchten Sie "{{name}}" wirklich löschen? Dies stoppt alle Dienste für diesen Drucker.`}},modelViewer:{openInSlicer:`Im Slicer öffnen`,openInSlicerWith:`In {{slicer}} öffnen`,moreSlicerOptions:`Weitere Slicer-Optionen`,openInSlicerFailed:`Konnte nicht im Slicer öffnen`,tabs:{model:`3D-Modell`},notAvailable:`nicht verfügbar`,plates:`Platten`,allPlates:`Alle Platten`,plateNumber:`Platte {{number}}`,plateCount:`{{count}} Platte`,plateCount_other:`{{count}} Platten`,objectCount:`{{count}} Objekt`,objectCount_other:`{{count}} Objekte`,filamentCount:`{{count}} Filament`,filamentCount_other:`{{count}} Filamente`,eta:`ETA {{minutes}} Min`,noPreview:`Keine Vorschau für diese Datei verfügbar`,pagination:{pageOf:`Seite {{current}} von {{total}}`,prev:`Zurück`,next:`Weiter`},errors:{failedToLoad:`Datei konnte nicht geladen werden`,noMeshes:`Keine Meshes in 3MF-Datei gefunden`,unsupportedFormat:`Nicht unterstütztes Dateiformat`}},maintenanceDescriptions:{lubricateCarbonRods:`Schmiermittel auf Karbonstäbe für sanfte Bewegung auftragen`,lubricateRails:`Schmiermittel auf Linearschienen für sanfte Bewegung auftragen`,cleanNozzle:`Hotend und Düse reinigen, um Verstopfungen zu verhindern`,checkBelts:`Riemenspannung für präzise Drucke überprüfen`,cleanBuildPlate:`Druckplatte für bessere Haftung reinigen`,checkExtruder:`Extruderzahnräder auf Verschleiß prüfen`,checkCooling:`Sicherstellen, dass Lüfter ordnungsgemäß funktionieren`,generalInspection:`Allgemeine Druckerinspektion`,cleanCarbonRods:`Karbonstäbe reinigen, um Reibung zu reduzieren`,lubricateSteelRods:`Schmiermittel auf Stahlstangen für sanfte Bewegung auftragen`,cleanSteelRods:`Stahlstangen reinigen, um Reibung zu reduzieren`,cleanLinearRails:`Linearschienen abwischen, um Staub und Schmutz zu entfernen`,checkPtfeTube:`PTFE-Schlauch auf Verschleiß oder Beschädigung prüfen`,replaceHepaFilter:`HEPA-Filter für Luftqualität ersetzen`,replaceCarbonFilter:`Aktivkohlefilter ersetzen`,lubricateLeftNozzleRail:`Linke Düsenschiene schmieren (H2-Serie)`},haSensors:{label:`Sensoren`,unavailable:`Nicht verfügbar`,blocksPrints:`{{entity}} — hält Drucke zurück, solange der Alarm aktiv ist`,states:{open:`Offen`,closed:`Geschlossen`,unlocked:`Entriegelt`,locked:`Verriegelt`,detected:`Erkannt`,clear:`Frei`,wet:`Nass`,dry:`Trocken`,problem:`Problem`,ok:`OK`,running:`Läuft`,stopped:`Gestoppt`,on:`An`,off:`Aus`},sectionTitle:`Home-Assistant-Sensoren (Drucker)`,add:`Sensor hinzufügen`,addTitle:`Home-Assistant-Sensor hinzufügen`,editTitle:`Home-Assistant-Sensor bearbeiten`,empty:`Noch keine Sensoren. Verknüpfe einen Türkontakt oder ein Thermometer aus Home Assistant, um es auf der Druckerkarte anzuzeigen.`,unknownPrinter:`Unbekannter Drucker`,badgeBlocks:`Hält Drucke zurück`,badgeNotifies:`Benachrichtigt`,badgeHidden:`Auf Karte ausgeblendet`,printer:`Drucker`,entity:`Entität`,searchPlaceholder:`Entitäten suchen ...`,noEntities:`Keine passenden Entitäten`,name:`Anzeigename`,alertWhen:`Alarm wenn`,alertNever:`Nie — nur anzeigen`,alertAbove:`Über`,alertBelow:`Unter`,alertHint:`Der Alarmzustand hebt den Sensor auf der Druckerkarte hervor und aktiviert die Optionen unten.`,showOnCard:`Auf Druckerkarte anzeigen`,notifyOnAlert:`Benachrichtigen, sobald der Alarm ausgelöst wird`,blockPrint:`Wartende Drucke zurückhalten, solange der Alarm aktiv ist`,blockPrintHint:`Aufträge bleiben in der Warteschlange und starten von selbst, sobald der Sensor wieder frei ist. Wird ignoriert, solange Home Assistant nicht erreichbar ist.`,toast:{created:`Sensor hinzugefügt`,updated:`Sensor gespeichert`,deleted:`Sensor entfernt`},error:{pickEntity:`Wähle eine Home-Assistant-Entität`,nameRequired:`Gib einen Anzeigenamen ein`,printerRequired:`Wähle einen Drucker`,alertRequired:`Lege zuerst eine Alarmbedingung fest`}},locationHaSensors:{sectionTitle:`Home-Assistant-Sensoren (Lagerorte)`,sectionDescription:`Binden Sie Home-Assistant-Temperatur-, Luftfeuchtigkeits- oder Batteriesensoren an Ihre Lagerorte, um Live-Werte auf der Filament-Karte und in der Tabelle anzuzeigen. Pro Lagerort ist nur ein Sensor je Kategorie möglich.`,add:`Sensor hinzufügen`,addTitle:`Home-Assistant-Sensor hinzufügen`,editTitle:`Home-Assistant-Sensor bearbeiten`,empty:`Noch keine Sensoren. Verknüpfen Sie einen Temperatur- oder Feuchtigkeitssensor aus Home Assistant, um ihn auf der Filament-Karte anzuzeigen.`,unknownLocation:`Unbekannter Lagerort`,location:`Lagerort`,showOnCard:`Auf Filament-Karte anzeigen`,overwriteConfirm:{title:`Vorhandenen Sensor ersetzen?`,messageTemperature:`„{{location}}“ hat bereits einen Temperatursensor gebunden: {{name}}. Beim Fortfahren wird dieser ersetzt.`,messageHumidity:`„{{location}}“ hat bereits einen Luftfeuchtigkeitssensor gebunden: {{name}}. Beim Fortfahren wird dieser ersetzt.`,messageBattery:`„{{location}}“ hat bereits einen Batteriesensor gebunden: {{name}}. Beim Fortfahren wird dieser ersetzt.`},autoAdd:{confirmTitle:`Auch die anderen Sensoren hinzufügen?`,confirmMessage:`Bambuddy hat für diesen Lagerort auch weitere Sensoren gefunden. Wählen Sie aus, welche zusätzlich hinzugefügt werden sollen.`,added:`Zusätzlich hinzugefügt: {{names}}`,noneFound:`Keine passenden Temperatur-, Luftfeuchtigkeits- oder Batteriesensoren für diesen Lagerort gefunden.`,onlyThisOne:`Nur dieser`},options:{buttonLabel:`Sensor-Optionen`,title:`Lagerort-Sensor-Optionen`,description:`Diese Werte werden verwendet, wenn ein Temperatur-, Luftfeuchtigkeits- oder Batteriesensor automatisch mit einem Lagerort gebunden wird.`,generalSettings:`Allgemeine Einstellungen`,pollInterval:`Aktualisierungsintervall (Sekunden)`,pollIntervalHint:`Wie oft Bambuddy Home Assistant abfragt und die Sensorwerte auf dem Bildschirm aktualisiert. Minimum 60 Sekunden.`,colorizeValues:`Sensorwerte anhand ihrer Alarmschwellen farbig darstellen`,aboveColor:`Farbe für Überschreitung`,belowColor:`Farbe für Unterschreitung`,optimalColor:`Farbe für Optimalwert`,colors:{red:`Rot`,orange:`Orange`,yellow:`Gelb`,green:`Grün`,blue:`Blau`,purple:`Lila`,pink:`Magenta`},saved:`Optionen gespeichert`,saveFailed:`Optionen konnten nicht gespeichert werden`,reset:`Zurücksetzen`,resetConfirm:{title:`Alle bestehenden Lagerort-Sensoren zurücksetzen?`,message:`Dies überschreibt die Alarmschwellen, Benachrichtigungen und Kartensichtbarkeit aller bestehenden Temperatur-, Luftfeuchtigkeits- und Batteriesensoren von Lagerorten mit den oben festgelegten Werten und setzt den Namen jedes Sensors auf seinen Home-Assistant-Anzeigenamen zurück – Drucker-Sensoren sind davon nicht betroffen. Dies kann nicht rückgängig gemacht werden. Je nach Anzahl der Sensoren kann dies einen Moment dauern.`},resetDone:`Auf {{count}} Lagerort-Sensoren angewendet`,resetFailed:`Zurücksetzen der Lagerort-Sensoren fehlgeschlagen`},deleteAllConfirm:{title:`Alle Sensoren löschen?`,message:`Dadurch werden alle {{count}} Sensoren entfernt, die an „{{location}}“ gebunden sind. Dies kann nicht rückgängig gemacht werden.`},currentlyBound:`Aktuell gebunden: {{entity}}`,error:{locationRequired:`Wählen Sie einen Lagerort`},toast:{created:`Sensor hinzugefügt`,updated:`Sensor gespeichert`,deleted:`Sensor entfernt`}},smartPlugs:{offline:`Offline`,admin:`Admin`,openPlugAdminPage:`Plug-Admin-Seite öffnen`,deleteSmartPlug:`Smart Plug löschen`,turnOnSmartPlug:`Smart Plug einschalten`,turnOffSmartPlug:`Smart Plug ausschalten`,turnOn:`Einschalten`,turnOff:`Ausschalten`,addSmartPlug:{scanningNetwork:`Netzwerk wird durchsucht...`,chooseEntity:`Entität auswählen...`,connectionFailed:`Verbindung fehlgeschlagen`,searchEntities:`Entitäten suchen...`,searchPowerSensors:`Leistungssensoren suchen...`,searchEnergySensors:`Energiesensoren suchen...`,placeholders:{plugName:`Wohnzimmer Steckdose`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Gleich wie Leistungs-Topic oder anders`}},linkedTo:`Verbunden mit:`,monitorOnly:`Nur Überwachung`,alerts:`Alarme`,scheduleOn:`Ein {{time}}`,scheduleOff:`Aus {{time}}`,on:`Ein`,off:`Aus`,power:`Leistung`,kwhToday:`kWh Heute`,settings:`Einstellungen`,automationSettings:`Automatisierungseinstellungen`,showInSwitchbar:`In Schaltleiste anzeigen`,quickAccessSidebar:`Schnellzugriff über Seitenleiste`,enabled:`Aktiviert`,enableAutomation:`Automatisierung für diesen Stecker aktivieren`,autoOn:`Auto Ein`,autoOnDescription:`Einschalten wenn Druck startet`,autoOff:`Auto Aus`,autoOffDescription:`Ausschalten wenn Druck abgeschlossen (einmalig)`,autoOffPersistent:`Aktiviert lassen`,autoOffPersistentDescription:`Zwischen Drucken aktiviert bleiben statt einmalig`,controlsPrinterPower:`Versorgt den Drucker`,controlsPrinterPowerDescription:`Deaktivieren, wenn diese Steckdose nur Zubehör versorgt (Filterlüfter, Licht). Sonst wird der Drucker beim Ausschalten als offline markiert.`,autoOffAfterDrying:`Automatisch aus nach Trocknung`,autoOffAfterDryingDescription:`Ausschalten, wenn AMS-Trocknung abgeschlossen ist`,delayAfterDryingMinutes:`Verzögerung nach Trocknung (Minuten)`,turnOffDelayMode:`Ausschaltverzögerungsmodus`,time:`Zeit`,temp:`Temp.`,delayMinutes:`Verzögerung (Minuten)`,tempThreshold:`Temperaturschwelle (°C)`,tempThresholdDescription:`Schaltet aus wenn die Düse unter diese Temperatur abkühlt`,edit:`Bearbeiten`,deleteConfirm:`Möchten Sie "{{name}}" wirklich löschen? Dies kann nicht rückgängig gemacht werden.`,turnOnConfirm:`Möchten Sie "{{name}}" wirklich einschalten?`,turnOffConfirm:`Möchten Sie "{{name}}" wirklich ausschalten? Dies unterbricht die Stromversorgung des angeschlossenen Geräts.`,failedToTurn:`{{name}}" konnte nicht {{action}} werden`,unknown:`Unbekannt`,addTitle:`Smart Plug hinzufügen`,editTitle:`Smart Plug bearbeiten`,stopScanning:`Suche beenden`,discoverTasmota:`Tasmota Geräte suchen`,foundDevices:`{{count}} Gerät(e) gefunden - zum Auswählen klicken:`,noDevicesFound:`Keine Tasmota Geräte in Ihrem Netzwerk gefunden`,haNotConfigured:`Home Assistant ist nicht konfiguriert. Einrichtung unter`,haSettingsPath:`Einstellungen → Netzwerk → Home Assistant`,selectEntity:`Entität auswählen *`,ipAddress:`IP-Adresse *`,nameLabel:`Name *`,username:`Benutzername`,password:`Passwort`,authHint:`Leer lassen, wenn Ihr Tasmota-Gerät keine Authentifizierung benötigt`,linkToPrinter:`Mit Drucker verbinden`,noPrinter:`Kein Drucker (nur manuelle Steuerung)`,linkingDescription:`Verknüpfung ermöglicht automatisches Ein-/Ausschalten bei Druckstart/-ende`,powerAlerts:`Leistungsalarme`,alertAbove:`Alarm wenn über (W)`,alertBelow:`Alarm wenn unter (W)`,alertDescription:`Benachrichtigung wenn der Stromverbrauch diese Schwellenwerte überschreitet. Leer lassen um diese Richtung zu deaktivieren.`,dailySchedule:`Tagesplan`,turnOnAt:`Einschalten um`,turnOffAt:`Ausschalten um`,scheduleDescription:`Den Stecker automatisch täglich zu diesen Zeiten ein-/ausschalten. Leer lassen um diese Aktion zu überspringen.`,showOnPrinterCard:`Auf Druckerkarte anzeigen`,displayOnPrinterCard:`Schaltfläche auf Druckerkarte anzeigen`,connectedResult:`Verbunden!`,deviceLabel:`Gerät: {{name}} - `,stateLabel:`Status: {{state}}`,test:`Test`,delete:`Löschen`,save:`Speichern`,add:`Hinzufügen`,cancel:`Abbrechen`,failedToStartScan:`Suche konnte nicht gestartet werden`,nameRequired:`Name ist erforderlich`,entityRequired:`Entität ist für Home Assistant Stecker erforderlich`,mqttTopicRequired:`Mindestens ein MQTT-Topic muss für Leistung, Energie oder Statusüberwachung konfiguriert sein`,loadingEntities:`Entitäten werden geladen...`,loading:`Laden...`,failedToLoadEntities:`Entitäten konnten nicht geladen werden: {{error}}`,noEntitiesMatching:`Keine Entitäten gefunden die "{{search}}" entsprechen`,noEntitiesAvailable:`Keine Entitäten verfügbar`,searchingEntities:`Alle Entitäten durchsuchen ({{count}} gefunden)`,showingEntities:`Zeige switch, light, input_boolean ({{count}} verfügbar)`,energyMonitoringOptional:`Energieüberwachung (Optional)`,energyMonitoringHint:`Sensoren suchen und auswählen, die Leistungs-/Energiedaten liefern.`,powerSensorW:`Leistungssensor (W)`,energyTodayKwh:`Energie Heute (kWh)`,totalEnergyKwh:`Gesamtenergie (kWh)`,noMatchingSensors:`Keine passenden Sensoren`,none:`Keine`,mqttNotConfigured:`MQTT-Broker nicht konfiguriert. Broker-Adresse einstellen unter`,mqttSettingsPath:`Einstellungen → Netzwerk → MQTT-Veröffentlichung`,mqttNotConfiguredSuffix:`(Sie müssen die Veröffentlichung nicht aktivieren, nur die Broker-Details ausfüllen).`,mqttMonitorOnlyDescription:`MQTT-Stecker empfangen Leistungs-/Energiedaten über MQTT-Abonnement. Ein-/Ausschalten ist nicht verfügbar - verwenden Sie Ihren MQTT-Broker oder Ihr Home-Automation-System.`,powerMonitoring:`Leistungsüberwachung`,energyMonitoring:`Energieüberwachung`,stateMonitoring:`Statusüberwachung`,optional:`optional`,topic:`Thema`,jsonPath:`JSON-Pfad`,multiplier:`Multiplikator`,onValue:`EIN-Wert`,mqttPowerHint:`JSON-Pfad extrahiert Wert aus JSON-Payload (z.B. "power_l1"). Leer lassen wenn Topic rohe numerische Werte sendet.
+ON value: the exact string that means "ON". Leave empty for auto-detect (ON, true, 1).`,restControl:`Control`,restOnUrl:`Turn ON URL`,restOffUrl:`Turn OFF URL`,restOnBody:`ON Request Body`,restOffBody:`OFF Request Body`,restMethod:`HTTP Method`,restHeaders:`Custom Headers (JSON)`,restStatusUrl:`Status URL`,restStatusPath:`State JSON Path`,restStatusOnValue:`ON Value`,restPowerUrl:`Power URL`,restPowerPath:`Power JSON Path`,restPowerMultiplier:`Power Multiplier`,restEnergyUrl:`Energy URL`,restEnergyPath:`Energy JSON Path (today)`,restEnergyTotalPath:`Energy JSON Path (lifetime)`,restEnergyTotalMultiplier:`Lifetime Multiplier`,restEnergyTotalPathHint:`e.g. aenergy.total`,restEnergyTotalHint:`Many plugs — every Shelly among them — report only a lifetime counter that never resets. It belongs here, not in the field above: read as today's usage it would never reset at midnight, and Yesterday and Total would stay empty. Bambuddy works Today and Yesterday out from it, which takes a day or two of readings to fill in. A Shelly reports watt-hours, so use a multiplier of 0.001.`,restEnergyMultiplier:`Energy Multiplier`,restUrlRequired:`At least one URL (ON or OFF) is required for REST plugs`,restHeadersHint:`e.g. {"Authorization": "Bearer your-token"}`,restBodyHint:`e.g. ON, {"state": "on"}`,restStatusHint:`URL to poll for current state`,restPathHint:`e.g. state or data.power.status`,restPowerUrlHint:`Separate URL for power data (uses Status URL if empty)`,restEnergyUrlHint:`Separate URL for energy data (uses Status URL if empty)`,restEnergyHint:`Each value can use its own URL or fall back to the Status URL. Use multipliers for unit conversion (e.g. 0.001 to convert Wh to kWh).`,testConnection:`Test Connection`,connectionSuccess:`Connection successful`,noSwitchesInSwitchbar:`No switches in switchbar`,enableSwitchbarHint:`Enable "Show in Switchbar" in Settings > Smart Plugs`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`Email`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`SMTP email notifications`,telegram:`Notifications via Telegram bot`,discord:`Send to Discord channel via webhook`,ntfy:`Free, self-hostable push notifications`,pushover:`Simple, reliable push notifications`,callmebot:`Free WhatsApp notifications via CallMeBot`,webhook:`Generic HTTP POST to any URL`,homeassistant:`Persistent notifications in Home Assistant dashboard`,bark:`iOS push notifications via Bark (self-hostable)`},lastSuccess:`Last: {{date}}`,error:`Error`,printer:`Printer:`,allPrinters:`All printers`,sendTestNotification:`Send Test Notification`,eventSettings:`Event Settings`,enabled:`Enabled`,sendFromProvider:`Send notifications from this provider`,printEvents:`Print Events`,printerStatus:`Printer Status`,amsAlarms:`AMS Alarms`,amsHtAlarms:`AMS-HT Alarms`,printQueue:`Print Queue`,start:`Start`,plateCheck:`Plate Check`,complete:`Complete`,failed:`Failed`,stopped:`Stopped`,progress:`Progress`,offline:`Offline`,lowFilament:`Low Filament`,maintenance:`Maintenance`,amsHumidity:`AMS Humidity`,amsTemp:`AMS Temp`,amsDryingSuspended:`Drying Suspended`,amsHtHumidity:`AMS-HT Humidity`,amsHtTemp:`AMS-HT Temp`,bedCooled:`Bed Cooled`,firstLayer:`First Layer`,quiet:`Quiet`,digest:`Digest {{time}}`,printStarted:`Print Started`,plateNotEmpty:`Plate Not Empty`,plateNotEmptyDescription:`Objects detected before print`,plateClearRequired:`Plate Clear Required`,plateClearRequiredDescription:`Print finished, queue waits for plate confirmation`,plateClear:`Plate Clear`,printCompleted:`Print Completed`,bedCooledLabel:`Bed Cooled`,bedCooledDescription:`Bed cooled below threshold after print`,firstLayerCompleteLabel:`First Layer Complete`,firstLayerCompleteDescription:`Notify with snapshot when first layer finishes`,missingSpoolAssignmentLabel:`Missing Spool Assignment`,billingChargeFailedLabel:`Billing Charge Failed`,billingChargeFailedDescription:`Notify when print costs could not be recorded`,missingSpoolAssignmentDescription:`Notify when print starts and required trays have no assigned spool`,printFailed:`Print Failed`,printStopped:`Print Stopped`,progressMilestones:`Progress Milestones`,progressMilestonesDescription:`Notify at 25%, 50%, 75%`,printerOffline:`Printer Offline`,printerError:`Printer Error`,aiFailureDetection:`AI Failure Detection`,aiFailureDetectionDescription:`Notify when Obico AI detects a possible print failure`,lowFilamentLabel:`Low Filament`,maintenanceDue:`Maintenance Due`,maintenanceDueDescription:`Notify when maintenance is needed`,amsHumidityHigh:`AMS Humidity High`,amsHumidityHighDescription:`Regular AMS humidity exceeds threshold`,amsTemperatureHigh:`AMS Temperature High`,amsTemperatureHighDescription:`Regular AMS temperature exceeds threshold`,amsDryingSuspendedTitle:`Auto-Drying Suspended`,amsDryingSuspendedDescription:`Automatic drying gave up on an AMS unit because humidity never fell below the threshold`,amsHtHumidityHigh:`AMS-HT Humidity High`,amsHtHumidityHighDescription:`AMS-HT humidity exceeds threshold`,amsHtTemperatureHigh:`AMS-HT Temperature High`,amsHtTemperatureHighDescription:`AMS-HT temperature exceeds threshold`,inventoryAlerts:`Inventory Alerts`,stockReorderAlert:`Reorder Alert`,stockReorderAlertDescription:`SKU has reached its reorder point`,stockBreakAlert:`Stock Break Alert`,stockBreakAlertDescription:`Stock will run out before replenishment arrives`,jobAdded:`Job Added`,jobAddedDescription:`Job added to queue`,jobAssigned:`Job Assigned`,jobAssignedDescription:`Model-based job assigned to printer`,jobStarted:`Job Started`,jobStartedDescription:`Queue job started printing`,jobWaiting:`Job Waiting`,jobWaitingDescription:`Job waiting for filament or printer`,jobSkipped:`Job Skipped`,jobSkippedDescription:`Job skipped (previous failed)`,jobFailed:`Job Failed`,jobFailedDescription:`Job failed to start`,queueComplete:`Queue Complete`,queueCompleteDescription:`All queue jobs finished`,quietHours:`Quiet Hours`,noNotificationsDuring:`No notifications during these hours`,editProviderToChangeQuietHours:`Edit provider to change quiet hours`,dailyDigest:`Daily Digest`,batchNotifications:`Batch notifications into a single daily summary`,sendAt:`Send at {{time}}`,editProviderToChangeDigestTime:`Edit provider to change digest time`,edit:`Edit`,deleteProvider:`Delete Notification Provider`,deleteConfirm:`Are you sure you want to delete "{{name}}"? This cannot be undone.`,delete:`Delete`,addTitle:`Add Notification Provider`,editTitle:`Edit Notification Provider`,nameLabel:`Name *`,namePlaceholder:`My Notifications`,providerTypeLabel:`Provider Type *`,configuration:`Configuration`,testConfiguration:`Test Configuration`,printerFilter:`Printer Filter`,onlyFromPrinter:`Only send notifications for events from this printer`,quietHoursDnd:`Quiet Hours (Do Not Disturb)`,quietStart:`Start`,quietEnd:`End`,dailyDigestLabel:`Daily Digest`,sendDigestAt:`Send digest at`,digestCollected:`Events will be collected and sent as a single summary at this time`,notificationEvents:`Notification Events`,progressPercent:`(25%, 50%, 75%)`,bedCooledAfterPrint:`(after print completes)`,haSensorAlert:`Printer Sensor Alert`,haSensorAlertDescription:`(a bound Home Assistant sensor needs attention)`,locationHaSensorAlert:`Storage Location Sensor Alert`,locationHaSensorAlertDescription:`(a Home Assistant sensor bound to a storage location needs attention)`,eventPriority:{sectionTitle:`ntfy Priority`,helpNtfy:`Pick a priority for each enabled event. ntfy uses these to escalate alerts (sound, visibility, push behavior). Levels not set here use the ntfy server default.`,min:`Min`,low:`Low`,default:`Default`,high:`High`,urgent:`Urgent`},cancel:`Cancel`,save:`Save`,add:`Add`,nameRequired:`Name is required`,fieldRequired:`{{field}} is required`,haDataInvalid:`The Data field must be a valid JSON object, e.g. {"priority": "high", "ttl": 0}`,phoneNumber:`Phone Number`,apiKey:`API Key`,serverUrl:`Server URL`,topic:`Topic`,authToken:`Auth Token`,userKey:`User Key`,appToken:`App Token`,priority:`Priority`,pushoverRetry:`Emergency Retry (s)`,pushoverExpire:`Emergency Expire (s)`,botToken:`Bot Token`,chatId:`Chat ID`,telegramThreadId:`Forum Topic ID`,telegramThreadIdHelp:`Optional. Posts into a single topic of a forum group — the last number in the topic link (t.me/c/.../25). Leave empty for the General topic.`,telegramThreadIdInvalid:`Forum Topic ID must be a number.`,smtpServer:`SMTP Server`,smtpPort:`SMTP Port`,security:`Security`,authentication:`Authentication`,username:`Username`,password:`Password`,fromEmail:`From Email`,toEmail:`To Email`,webhookUrl:`Webhook URL`,payloadFormat:`Payload Format`,authorization:`Authorization`,titleFieldName:`Title Field Name`,messageFieldName:`Message Field Name`,editTemplate:`Edit Template: {{name}}`,titleLabel:`Title`,bodyLabel:`Body`,titlePlaceholder:`Notification title...`,bodyPlaceholder:`Notification body...`,availableVariables:`Available Variables`,clickToInsert:`Click to insert at cursor position in body`,livePreview:`Live Preview`,hide:`Hide`,show:`Show`,loadingPreview:`Loading preview...`,enterTemplateContent:`Enter template content to see preview`,titlePreview:`Title:`,bodyPreview:`Body:`,resetToDefault:`Reset to Default`,titleRequired:`Title is required`,bodyRequired:`Body is required`,notificationLog:`Notification Log`,showFailedOnly:`Failed only`,last24Hours:`Last 24 hours`,last7Days:`Last 7 days`,last30Days:`Last 30 days`,last90Days:`Last 90 days`,justNow:`Just now`,noFailedNotifications:`No failed notifications`,noNotificationsLogged:`No notifications logged`,unknownProvider:`Unknown Provider`,logTitle:`Title`,logMessage:`Message`,logError:`Error`,logProvider:`Provider: {{type}}`,logTime:`Time: {{time}}`,refresh:`Refresh`,clearOld:`Clear Old`,statsSummary:`Last {{days}} days:`,statsNotifications:`notifications`,statsSent:`{{count}} sent`,statsFailed:`{{count}} failed`,eventTypes:{print_start:`Print Started`,print_complete:`Print Complete`,print_failed:`Print Failed`,print_stopped:`Print Stopped`,print_progress:`Progress`,printer_offline:`Printer Offline`,printer_error:`Printer Error`,filament_low:`Low Filament`,maintenance_due:`Maintenance Due`,test:`Test`},userEmail:{title:`Notifications`,emailNotifications:`Email Notifications`,emailNotificationsDesc:`Receive email notifications for your own print jobs. Emails are sent using the system SMTP settings configured in Advanced Authentication.`,sendingTo:`Notifications will be sent to`,noEmailWarning:`Your account does not have an email address. Contact an administrator to add one.`,printJobNotifications:`Print Job Notifications`,printJobNotificationsDesc:`Choose which events trigger email notifications for print jobs you submit.`,printJobStarts:`Print Job Starts`,printJobStartsDesc:`Get notified when your print job begins.`,printJobFinishes:`Print Job Finishes`,printJobFinishesDesc:`Get notified when your print job completes successfully.`,printErrors:`Print Errors`,printErrorsDesc:`Get notified when your print job fails or encounters an error.`,printJobStops:`Print Job Stops`,printJobStopsDesc:`Get notified when your print job is cancelled or stopped.`,saveSuccess:`Notification preferences saved.`,saveError:`Failed to save notification preferences.`}},richTextEditor:{bold:`Bold`,italic:`Italic`,underline:`Underline`,bulletList:`Bullet List`,numberedList:`Numbered List`,alignLeft:`Align Left`,alignCenter:`Align Center`,alignRight:`Align Right`,addLink:`Add Link`,removeLink:`Remove Link`},externalLinks:{title:`Sidebar Links`,sidebarLayout:`Sidebar`,sidebarLayoutDescription:`Show or hide built-in pages, add external links, and drag items to reorder the sidebar navigation.`,systemPages:`Bambuddy pages`,externalLinks:`External links`,visibleInSidebar:`Visible in sidebar`,hiddenFromSidebar:`Hidden from sidebar`,requiredInSidebar:`Required in sidebar`,hidePage:`Hide page`,showPage:`Show page`,settingsCannotBeHidden:`Settings cannot be hidden`,noLinksConfigured:`No external links configured`,deleteLink:`Delete Link`,removeCustomIcon:`Remove custom icon`,openInNewTab:`Open in new tab`,placeholders:{linkName:`My Link`}},keyboardShortcuts:{title:`Keyboard Shortcuts`,navigation:`Navigation`,archivesSection:`Archives`,kProfilesSection:`K-Profiles`,generalSection:`General`,shortcuts:{goToPrinters:`Go to Printers`,goToArchives:`Go to Archives`,goToQueue:`Go to Queue`,goToStats:`Go to Statistics`,goToProfiles:`Go to Cloud Profiles`,goToSettings:`Go to Settings`,focusSearch:`Focus search`,openUploadModal:`Open upload modal`,clearSelection:`Clear selection / blur input`,contextMenu:`Context menu on cards`,refreshProfiles:`Refresh profiles`,newProfile:`New profile`,exitSelectionMode:`Exit selection mode`,showHelp:`Show this help`},footer:`Press Esc or click outside to close`},notificationLog:{title:`Notification Log`,events:{printStarted:`Print Started`,printComplete:`Print Complete`,printFailed:`Print Failed`,printStopped:`Print Stopped`,progress:`Progress`,printerOffline:`Printer Offline`,printerError:`Printer Error`,lowFilament:`Low Filament`,maintenanceDue:`Maintenance Due`,test:`Test`},timeAgo:{justNow:`Just now`,minutesAgo:`{{minutes}}m ago`,hoursAgo:`{{hours}}h ago`}},restoreBackup:{title:`Restore Backup`,restoring:`Restoring...`,restoreComplete:`Restore Complete`,restoreFailed:`Restore Failed`,importSettings:`Import settings from a backup file`,pleaseWait:`Please wait while your data is being restored`,clickToSelect:`Click to select backup file (.json or .zip)`,howDuplicateHandling:`How duplicate handling works:`,categories:{printers:`Printers`,smartPlugs:`Smart Plugs`,notificationProviders:`Notification Providers`,filaments:`Filaments`,archives:`Archives`,pendingUploads:`Pending Uploads`,settingsTemplates:`Settings & Templates`},matchingInfo:{printers:`matched by serial number`,smartPlugs:`matched by IP address`,notificationProviders:`matched by name`,filaments:`matched by name + type + brand`,archives:`matched by content hash`,pendingUploads:`matched by filename`,settingsTemplates:`always overwritten`},replaceExisting:`Replace existing data`,keepExisting:`Keep existing data`,replaceDescription:`Overwrite items that already exist with backup data`,keepDescription:`Only restore items that don't already exist`,caution:`Caution:`,cautionText:`Overwriting will replace your current configurations with backup data. Printer access codes are never overwritten for security.`,itemsRestored:`Items Restored`,itemsSkipped:`Items Skipped`,restored:`Restored`,skipped:`Skipped (already exist)`,filesLabel:`Files (3MF, thumbnails, etc.)`,newApiKeysGenerated:`New API Keys Generated`,newApiKeysWarning:`These keys are only shown once. Copy them now!`,processingBackup:`Processing backup file...`,noDataFound:`No data was found to restore in the backup file.`,failedToRestore:`Failed to restore backup. Please check the file format.`},backupExport:{title:`Export Backup`,selectData:`Select data to include`,selectAll:`Select All`,selectNone:`Select None`,categoryDescriptions:{settings:`Language, theme, update preferences`,notifications:`ntfy, Pushover, Discord, etc.`,templates:`Custom message templates`,smartPlugs:`Tasmota plug configurations`,externalLinks:`Sidebar links to external services`,printers:`Printer info (access codes excluded)`,plateDetection:`Empty plate reference images`,filaments:`Filament types and costs`,maintenance:`Custom maintenance schedules`,archives:`All print data + files (3MF, thumbnails, photos)`,projects:`Projects, BOM items, and attachments`,pendingUploads:`Virtual printer uploads awaiting review`,apiKeys:`Webhook API keys (new keys generated on import)`},requiresPrinters:`Requires Printers to be selected`,zipFileWarning:`ZIP file will be created.`,zipFileDescription:`Includes all 3MF files, thumbnails, timelapses, and photos. This may take a while and result in a large file.`,includeAccessCodes:`Include Access Codes`,includeAccessCodesDescription:`For transferring to another machine`,includeAccessCodesWarning:`Access codes will be included in plain text. Keep this backup file secure!`,categoriesSelected:`{{selectedCount}} categories selected`},pendingUploads:{placeholders:{notes:`Add notes about this print...`},discardUpload:`Discard Upload`,archiveAllUploads:`Archive All Uploads`,discardAllUploads:`Discard All Uploads`,archive:`Archive`,timeAgo:{justNow:`Just now`,minutesAgo:`{{minutes}}m ago`,hoursAgo:`{{hours}}h ago`,daysAgo:`{{days}}d ago`}},apiBrowser:{placeholders:{requestBody:`JSON request body...`,searchEndpoints:`Search endpoints...`}},configureAmsSlot:{title:`Configure AMS Slot`,slotConfigured:`Slot Configured!`,configuringSlot:`Configuring slot:`,slotLabel:`{{ams}} Slot {{slot}}`,searchPresets:`Search presets...`,colorPlaceholder:`Color name or hex (e.g., brown, FF8800)`,clearCustomColor:`Clear custom color`,noCloudPresets:`No cloud presets. Login to Bambu Cloud to sync.`,noPresetsAvailable:`No presets available. Login to Bambu Cloud or import local profiles.`,noMatchingPresets:`No matching presets found.`,custom:`Custom`,builtin:`Built-in`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Settings sent to printer`,filamentProfile:`Filament Profile`,kProfileLabel:`K Profile (Pressure Advance)`,filteringFor:`Filtering for: {{material}}`,noKProfile:`No K profile (use default 0.020)`,noMatchingKProfiles:`No matching K profiles found. Default K=0.020 will be used.`,otherKProfiles:`Other K profiles on this printer`,selectFilamentFirst:`Select a filament profile first`,kFromCalibration:`K={{value}} from printer calibration`,customColorLabel:`Custom Color (optional)`,presetColors:`{{name}} colors:`,showLessColors:`Show less colors`,showMoreColors:`Show more colors`,clear:`Clear`,hexLabel:`Hex: #{{hex}}`,resetting:`Resetting...`,resetSlot:`Reset Slot`,cancel:`Cancel`,configuring:`Configuring...`,configureSlot:`Configure Slot`},githubBackup:{title:`Git Backup`,history:`History`,downloadBackup:`Download Backup`,restoreBackup:`Restore Backup`,noBackupsYet:`No backups yet`},emailSettings:{placeholders:{fromName:`BamBuddy`}},tagManagement:{searchTags:`Search tags...`,renameTag:`Rename tag`,deleteTag:`Delete tag`},notificationTemplates:{placeholders:{title:`Notification title...`,body:`Notification body...`}},batchTag:{placeholders:{newTag:`Enter new tag...`}},photoGallery:{deletePhoto:`Delete Photo`},filamentHoverCard:{copySpoolUuid:`Copy spool UUID`},kProfilesView:{hasNote:`Has note`,copyProfile:`Copy profile`},layout:{openMenu:`Open menu`,noPermissionSystemInfo:`You do not have permission to view system information`},dashboard:{dragToReorder:`Drag to reorder`,hideWidget:`Hide widget`},notificationProviderCard:{deleteNotificationProvider:`Delete Notification Provider`},fileManagerModal:{closeFileManager:`Close file manager`,sortFiles:`Sort files`,goToParentFolder:`Go to parent folder`,threeView:`3D View`},embeddedCameraViewer:{refreshStream:`Refresh stream`,close:`Close`,zoomOut:`Zoom out`,resetZoom:`Reset zoom`,zoomIn:`Zoom in`,dragToResize:`Drag to resize`},timelapseViewer:{skipBack5s:`Skip back 5s`,skipForward5s:`Skip forward 5s`},notificationProviders:{descriptions:{email:`SMTP email notifications`,telegram:`Notifications via Telegram bot`,discord:`Send to Discord channel via webhook`,ntfy:`Free, self-hostable push notifications`,pushover:`Simple, reliable push notifications`,callmebot:`Free WhatsApp notifications via CallMeBot`,webhook:`Generic HTTP POST to any URL`}},logViewer:{searchPlaceholder:`Search message or logger name...`,noLogEntries:`No log entries found`},switchbarPopover:{noSwitchesInSwitchbar:`No switches in switchbar`},projectPageModal:{placeholders:{title:`Title`,designer:`Designer`,license:`License`,description:`Enter description...`,profileTitle:`Profile Title`,profileDescription:`Profile description...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`Waiting`,justNow:`Just now`,now:`Now`,minsAgo:`{{count}}m ago`,inMins:`in {{count}}m`,hoursAgo:`{{count}}h ago`,inHours:`in {{count}}h`,daysAgo:`{{count}}d ago`,inDays:`in {{count}}d`},spoolbuddy:{nav:{dashboard:`Dashboard`,ams:`AMS`,inventory:`Inventory`,writeTag:`Write`,settings:`Settings`},status:{nfcReady:`NFC Ready`,nfcOff:`NFC Off`,offline:`Offline`,online:`Online`,noPrinters:`No printers`,deviceOffline:`Device Offline`,waitingConnection:`Waiting for device connection...`,systemReady:`System Ready`,status:`Status`},dashboard:{readyToScan:`Ready to scan`,idleMessage:`Place a spool on the scale to identify it`,nfcHint:`NFC tag will be read automatically`,device:`Device`,syncWeight:`Sync Weight`,weightSynced:`Synced!`,unknownTag:`Unknown Tag`,newTag:`New Tag Detected`,onScale:`on scale`,linkSpool:`Link to Spool`,linkTagTitle:`Link Tag to Spool`,linkTag:`Link Tag`,selectSpool:`Select a spool to link this tag to:`,noUntagged:`No spools without tags found`,tagDetected:`Tag detected`,noTag:`No tag`,tagId:`Tag`,grossWeight:`Gross weight`,spoolSize:`Spool size`,close:`Close`,currentSpool:`Current Spool`,plateReady:`Plate ready: {{name}}`,plateReadyLabel:`Plates ready to clear`,plateClearAction:`Clear`,plateClearedToast:`Plate marked as cleared`,plateClearFailed:`Could not mark plate as cleared`},modal:{spoolDetected:`Spool Detected`,assignToAms:`Assign to AMS`,syncWeight:`Sync Weight`,weightSynced:`Synced!`,syncing:`Syncing...`,newTagDetected:`New Tag Detected`,addToInventory:`Add to Inventory`,assignToAmsTitle:`Assign to AMS`,selectSlot:`Select a slot`,assign:`Assign`,assigning:`Assigning...`,assignSuccess:`Assigned!`,assignPendingInsert:`Assigned. Slot will configure when you insert the spool.`,assignError:`Failed to assign spool. Please try again.`,noPrinterSelected:`Select a printer...`,noAmsDetected:`No AMS detected on this printer`,slot:`Slot`},weight:{noReading:`No reading`,stable:`Stable`,measuring:`Measuring...`,tare:`Tare`,calibrate:`Calibrate`},spool:{remaining:`Remaining`,material:`Material`,brand:`Brand`,color:`Color`,coreWeight:`Core`,labelWeight:`Label`,scaleWeight:`Scale`,netWeight:`Net`,lastUsed:`Last used`,unknownColor:`Unknown color`},ams:{noData:`No AMS detected`,connectAms:`Connect an AMS to see filament slots`,noPrinter:`No printer selected`,selectPrinter:`Select a printer from the top bar`,printerDisconnected:`Printer disconnected`,humidity:`Humidity`,level:`Level`,active:`Active`,slot:`Slot`,empty:`Empty`},inventory:{search:`Search spools...`,empty:`No spools in inventory`,noResults:`No matching spools`,spools:`spools`,addSpool:`Add Spool`},settings:{tabDevice:`Device`,tabDisplay:`Display`,tabScale:`Scale`,tabUpdates:`Updates`,nfcReader:`NFC Reader`,type:`Type`,connection:`Connection`,notConnected:`N/A`,deviceInfo:`Device Info`,hostname:`Host`,uptime:`Uptime`,systemConfig:`Backend & Auth`,backendUrl:`Bambuddy Backend URL`,apiToken:`API Token`,apiTokenPlaceholder:`Enter API token`,saveConfig:`Save Config`,systemQueued:`Config queued.`,nfcDiagnostic:`NFC Diagnostic`,scaleDiagnostic:`Scale Diagnostic`,readTagDiagnostic:`Read Tag Diagnostic`,testNfc:`Test reader`,testScale:`Test accuracy`,testReadTag:`Read tag`,systemFieldsRequired:`Backend URL is required.`,brightness:`Brightness`,saved:`Saved`,noBacklight:`No DSI backlight detected. Brightness control requires a DSI display.`,screenBlank:`Screen Blank Timeout`,screenBlankDesc:`Screen turns off after inactivity. Touch to wake.`,displayNote:`Brightness is applied as a software filter.`,scaleCalibration:`Scale Calibration`,currentWeight:`Current weight`,tareOffset:`Tare`,calFactor:`Factor`,knownWeight:`Known weight`,calStep1:`Remove all items from the scale and press Set Zero.`,calStep2:`Place known weight on scale.`,setZero:`Set Zero`,calibrateNow:`Calibrate`,calibrated:`Calibrated`,tareSet:`Tare command sent. Waiting for device...`,tareComplete:`Tare complete!`,tareTimedOut:`Tare timed out — is the SpoolBuddy daemon running?`,tareFailed:`Failed to send tare command`,zeroSet:`Zero point set. Place known weight on scale.`,calibrationDone:`Calibration complete!`,calibrationFailed:`Calibration failed`,lastCalibrated:`Last calibrated`,stable:`Stable`,settling:`Settling...`,firmware:`Firmware`,scale:`Scale`,noDevice:`No SpoolBuddy device found`,daemonVersion:`Daemon Version`,currentVersion:`Current`,versionPending:`Waiting for daemon...`,checking:`Checking...`,checkUpdates:`Check for Updates`,updateAvailable:`Update available`,updateInstructions:`Update via SSH: run the SpoolBuddy install script to upgrade.`,upToDate:`Up to date`,includeBeta:`Include beta versions`},writeTag:{tabExisting:`Existing Spool`,tabNew:`New Spool`,tabReplace:`Replace Tag`,searchPlaceholder:`Search by material, color, brand...`,noUntaggedSpools:`No spools without tags`,noTaggedSpools:`No spools with tags`,selectSpool:`Select a spool, then place a blank NTAG on the reader`,placeTag:`Place an NTAG on the reader`,tagReady:`Tag detected — ready to write`,writeTag:`Write Tag`,replaceTag:`Replace Tag`,writing:`Writing tag...`,waiting:`Waiting for SpoolBuddy...`,writeSuccess:`Tag written successfully!`,writeFailed:`Write failed`,queueFailed:`Failed to queue write command`,tryAgain:`Try Again`,cancel:`Cancel`,replaceWarning:`Old tag will be unlinked. New tag will replace it.`,deviceOffline:`SpoolBuddy is offline`,material:`Material`,colorName:`Color Name`,color:`Color`,brand:`Brand`,weight:`Weight (g)`,createSpool:`Create Spool`,creating:`Creating...`,spoolCreated:`Spool created! Ready to write.`,createFailed:`Failed to create spool`,incompleteDataWarning:`Tag written with incomplete Spoolman data`},quickMenu:{printerPower:`Printer Power`,systemControls:`System`,restartDaemon:`Restart Daemon`,restartBrowser:`Restart Browser`,reboot:`Reboot`,shutdown:`Shutdown`,swipeToClose:`Swipe down to close`,confirmTitle:`Confirm`,confirmShutdown:`Are you sure you want to shut down the SpoolBuddy? You will need physical access to turn it back on.`,confirmReboot:`Are you sure you want to reboot the SpoolBuddy?`,confirmRestartDaemon:`Restart the SpoolBuddy daemon? NFC and scale will be temporarily unavailable.`,confirmRestartBrowser:`Restart the kiosk browser? The display will briefly go blank.`,confirm:`Confirm`,confirmPlugOn:`Turn on {{name}}?`,confirmPlugOff:`Turn off {{name}}?`,turnOn:`Turn On`,turnOff:`Turn Off`}},diagnostic:{modalTitle:`Connection diagnostic — {{name}}`,running:`Running diagnostic...`,runningElapsed:`Running diagnostic... ({{elapsed}}s)`,waitingForReportHint:`Listening for the printer to publish a status report — this can take up to {{max}} seconds.`,runFailed:`Diagnostic could not run: {{error}}`,retry:`Run again`,runButton:`Run diagnostic`,sectionTitle:`Connection Diagnostic`,sectionDescription:`Check why a printer won't connect or won't print — port reachability, LAN developer mode, Docker network mode, and credentials.`,noPrinters:`No printers configured.`,overall:{ok:`No problems found — the printer connection looks healthy.`,warnings:`The printer should work, but some things need attention.`,problems:`Found problems that explain why the printer won't connect or print.`},check:{port_mqtt:{title:`Control port (MQTT 8883)`,pass:`Reachable — the printer is accepting control connections.`,fail:`Port 8883 is unreachable. The printer is powered off, on a different IP address, or a firewall is blocking it. Verify the printer IP and that nothing blocks port 8883.`},port_ftps:{title:`File transfer port (FTPS 990)`,pass:`Reachable — sending print files will work.`,warn:`Port 990 is unreachable. Monitoring may still work, but sending prints to the printer will fail. Make sure port 990 is not blocked.`,warn_no_tls:`Port 990 is open but the printer's file service is not completing a TLS handshake. Print files, covers and timelapses cannot be fetched, so archives stay empty. Restart the printer — unblocking the port will not help.`},external_storage:{title:`Store sent files on external storage (install step 4)`,pass:`The printer reports this option is on — sent files will be stored on the SD card and archives will have thumbnails and slicer metadata.`,fail:`The printer reports this option is off. Enable "Store sent files on external storage" — on newer firmware (P2S 01.02 / Bambu Studio 2.6+) the toggle lives on the printer's Print Settings; on older versions it's in Bambu Studio / OrcaSlicer's Device tab. Without it, every archived print is missing its thumbnail and slicer metadata.`,skip:`Not checked — needs a live MQTT connection. On older slicers where this setting lives only in the slicer the printer never reports it, so this check will pass even when the option is off — verify install step 4 manually.`,skip_unsupported_model:`This model has an SD slot but no way to turn the option on — current P1-series firmware doesn't expose the toggle in Bambu Studio and the printer has no screen. Nothing to fix here; archived prints may lack thumbnails and slicer metadata until Bambu Lab adds firmware support.`,fail_no_media:`The option is on, but the printer reports no card or stick in its slot, so there is nowhere for sent files to go. Insert one and print again — until then every archived print will be missing its thumbnail and slicer metadata.`,warn_internal_storage:`The option is on and storage is present, but the last print still went to the printer's internal storage, which Bambuddy cannot read. On H2-series, P2S and X2D, Bambu Studio's Print button always sends there whatever this option is set to. Prints archive with their name and timing, but without a thumbnail or slicer metadata. For complete archives, start prints from Bambuddy or slice in OrcaSlicer — or in Bambu Studio use Send with External selected, then start the print.`,warn_internal_history:`The option is on and storage is present, but the last print ran from a file that was already on the printer — a re-print from its screen, a start from Handy, or a file sent earlier. That library sits on internal storage Bambuddy cannot read, and no setting changes it, because nothing was sent for that print. It still archives with its name and timing, but without a thumbnail or slicer metadata. For complete archives, start prints from Bambuddy or send them from the slicer.`},port_rtsps:{title:`Camera port ({{protocol}} {{port}})`,pass:`Reachable — the camera stream will work.`,warn:`Port {{port}} is unreachable. The live camera view will not work. This does not affect printing.`},macos_local_network:{title:`macOS Local Network permission`,pass:`macOS is allowing Bambuddy to reach the local network.`,warn_unsigned:`The Python that runs Bambuddy has no code signature, so macOS has nothing to attach a Local Network permission to and silently drops every connection to the printer — no error and no prompt. Run the Bambuddy updater (install/update_macos.sh), which signs it, then restart Bambuddy. Interpreter: {{executable}}`,warn_permission:`If the printer is powered on and at this address, open System Settings > Privacy & Security > Local Network and make sure the Python that runs Bambuddy is enabled. macOS drops local connections silently when it is not, and updating Python can leave the old permission behind.`},network_mode:{title:`Container network mode`,genericRuntime:`a container`,pass:`Running in {{runtime}} with host networking.`,warn:`Bambuddy is running in {{runtime}} with bridge networking. Printer discovery and the Virtual Printer need host networking — recreate the container with host network mode ("network_mode: host" in docker-compose, "--network=host" for Podman).`,skip:`Not running in a container — not applicable.`,skip_unknown:`Bambuddy is running in {{runtime}}, but its network mode could not be determined. If printer discovery or the Virtual Printer do not work, recreate the container with host networking.`,skip_system_container:`Bambuddy is running in a {{runtime}} system container, which sits on the LAN like a virtual machine — not applicable.`},subnet:{title:`Network subnet`,pass:`The printer and Bambuddy are on the same subnet.`,warn:`The printer ({{printer_ip}}) and Bambuddy ({{host_ip}}) are on different subnets. They may not reach each other unless routing between the subnets is configured.`,skip:`Subnet could not be determined — skipped.`},mqtt_auth:{title:`Printer credentials`,pass:`The printer accepted the connection.`,fail:`The printer is reachable but Bambuddy is not connected to it. The access code or serial number is most likely wrong — the access code changes every time LAN Only or Developer Mode is toggled, so re-copy it from the printer screen. A printer that is rebooting, or already at its limit of simultaneous connections, can look the same.`,fail_auth_rejected:`The printer refused Bambuddy's credentials. The access code or serial number is wrong — the access code changes every time LAN Only or Developer Mode is toggled, so re-copy it from the printer screen and save it in the printer settings.`,skip:`Not checked — the printer could not be reached.`},developer_mode:{title:`LAN Developer Mode`,pass:`Developer Mode is enabled.`,fail:`Developer Mode is OFF on the printer. Enable it in the printer's LAN settings — and confirm with OK. Without it, prints will not start.`,skip:`Could not be checked — requires a live connection to the printer.`},printer_publishing:{title:`Printer is publishing status`,pass:`The printer is publishing status updates — AMS, filaments, and K-profiles will mirror correctly to the slicer.`,fail:`The MQTT broker accepted the connection but the printer has not published any status reports. This is almost always a wrong or mis-cased serial number — the device/<serial>/report topic is case-sensitive. Re-check the serial in printer settings against the screen on the printer.`,skip:`Could not be checked — requires a live connection to the printer.`}}},systemHealth:{sectionTitle:`System Health`,sectionDescription:`Scans recent logs for known issues you can usually fix yourself, before they turn into a support ticket.`,rescan:`Re-scan`,clean:`No known issues found in the last {{times}} log entries.`,logUnavailable:`File logging is disabled, so logs cannot be scanned. Enable file logging to use this check.`,learnMore:`How to fix`,fixLabel:`Fix:`,occurrences:`Seen {{times}}× — last at {{lastSeen}}`,category:{layer8:`You can fix this`,environment:`Environment`,bug:`Please report this`},signature:{"ftp-auth-rejected":{name:`Printer rejected the access code`,cause:`The printer refused the file-transfer login. The access code is wrong, or it changed after Developer Mode was toggled.`,fix:`Re-copy the access code from the printer screen (LAN settings) and update it in the printer's settings in Bambuddy.`},"ftp-connection-timeout":{name:`File-transfer connection timed out`,cause:`Bambuddy could not reach the printer's file-transfer port (FTPS 990). The port is blocked, or the printer is off or on another subnet.`,fix:`Make sure nothing blocks port 990 between Bambuddy and the printer, and that both are on the same network.`},"ftp-ssl-error":{name:`Secure file-transfer handshake failed`,cause:`The printer's file service answered port 990 without TLS. Its file server has wedged — a printer-side fault, not a firewall or firmware problem.`,fix:`Restart the printer. Until then print files, covers and timelapses cannot be fetched; printing itself is unaffected.`},"bambu-cloud-captcha":{name:`Bambu Cloud is asking for a CAPTCHA`,cause:`Bambu's anti-abuse layer is challenging this network, so no Bambu Cloud sign-in can complete. It is tied to the public IP address, not to your account or this installation.`,fix:`Wait — it normally clears within a few hours, and repeated sign-in attempts prolong it. To connect meanwhile, sign in with an access token taken from a browser session.`},"mqtt-connection-flapping":{name:`Printer connection keeps dropping`,cause:`The control connection (MQTT 8883) repeatedly disconnects and reconnects — usually a weak network path or a partially blocked port.`,fix:`Check the Wi-Fi signal at the printer, prefer a wired connection, and make sure port 8883 is reliably reachable.`},"camera-connection-refused":{name:`Camera stream unreachable`,cause:`The live camera could not be reached on port RTSPS 322. The port is blocked, or the camera or LAN liveview is off on the printer.`,fix:`Enable the camera and LAN liveview on the printer, and make sure port 322 is not blocked. This does not affect printing.`},"database-locked":{name:`Database write contention`,cause:`The SQLite database is hitting "database is locked" errors under load — common when running several printers at once.`,fix:`Switch Bambuddy to an external PostgreSQL database. See the PostgreSQL guide in the documentation.`}}},vpDiagnostic:{title:`Setup check — {{name}}`,runButton:`Run setup check`,running:`Running setup check...`,runFailed:`Could not run the setup check: {{error}}`,retry:`Run again`,overall:{ok:`All checks passed — this virtual printer is set up correctly.`,warnings:`The virtual printer should work, but some things need attention.`,problems:`Found problems that explain why the slicer can't see or use this virtual printer.`},check:{enabled:{title:`Virtual printer enabled`,fail:`This virtual printer is switched off. Toggle it on to make it discoverable.`},running:{title:`Services running`,fail:`The virtual printer is enabled but its services are not running. Check the Bambuddy log — a bind IP conflict or a permission error usually stops them.`},bind_interface:{title:`Bind network interface`,fail:`The bind interface is not set, or no longer exists on this host. Pick a current interface in the Bind Interface dropdown.`},access_code:{title:`Access code set`,fail:`No access code is set. The slicer must be given the same 8-character access code you set here.`},target_printer:{title:`Target printer`,fail:`No target printer is selected. Proxy mode needs a real printer to forward to.`,warn:`The target printer is offline right now — proxying will resume once it reconnects.`},port_ftps:{title:`File-upload service (port {{port}})`,fail:`Nothing is listening on port {{port}} of the bind IP, so the slicer cannot upload files. A port conflict on this interface is the usual cause.`},port_mqtt:{title:`Control service (port {{port}})`,fail:`Nothing is listening on port {{port}} of the bind IP, so the slicer cannot connect or show status.`},port_bind:{title:`Discovery service (port {{port}})`,fail:`Nothing is listening on port {{port}} of the bind IP, so the slicer's discovery handshake fails.`},privileged_ports:{title:`Privileged port binding`,fail:`Port {{port}} is below 1024, and this service is not permitted to bind it — which is why nothing is listening above. Add AmbientCapabilities=CAP_NET_BIND_SERVICE to /etc/systemd/system/bambuddy.service and restart, or run "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))". On Docker, add cap_add: [NET_BIND_SERVICE].`},certificate:{title:`TLS certificate`,pass:`Certificate ready. Make sure the Bambuddy CA certificate (above) is imported into your slicer's trust store.`,fail:`The TLS certificate for this virtual printer is missing. Check that the Bambuddy data directory is writable.`}}},bugReport:{title:`Report a Bug`,description:`Description`,descriptionPlaceholder:`What went wrong? Please describe the issue...`,email:`Email (optional)`,emailPlaceholder:`your@email.com`,emailPrivacy:`If provided, your email will be included in a collapsed section of the GitHub issue so the maintainer can follow up.`,screenshot:`Screenshot`,uploadOrPaste:`Upload, paste, or drag an image`,dataCollectedSummary:`What data is included in the report?`,dataIncluded:`Included:`,dataIncludedList:`App version, OS, architecture, Python version, database stats (counts only), printer models, nozzle counts, firmware versions, connectivity status, integration status (Spoolman, MQTT, HA), non-sensitive settings, network interface count, Docker details, dependency versions.`,dataNeverIncluded:`Never included:`,dataNeverIncludedList:`Printer names, serial numbers, access codes, passwords, IP addresses, email addresses, API keys, tokens, webhook URLs, hostnames, or usernames.`,submit:`Submit`,startLogging:`Start Debug Logging`,stepEnableLogging:`Debug logging enabled`,stepReproduce:`Reproduce the issue now`,stepStopLogging:`Stop & submit report`,stopAndSubmit:`Stop & Submit`,maxDuration:`Auto-stops after {{minutes}} min`,stoppingLogs:`Collecting logs & submitting...`,submitting:`Submitting bug report...`,submittingStepConnection:`Running printer connectivity checks`,submittingStepVirtualPrinters:`Running virtual-printer setup checks`,submittingStepLogScan:`Scanning recent logs for known issues`,submittingStepSubmit:`Submitting report to GitHub`,submitSuccess:`Bug report submitted successfully!`,submitFailed:`Failed to submit bug report`,diagnosticChecking:`Checking printer connections...`,diagnosticHealthy:`Connection check passed — no problems found on your printers.`,diagnosticSummary:`{{problems}} of {{total}} printers have connection issues`,diagnosticIntro:`One or more printers have a connection problem that may be causing your issue. Expand a printer below to see the fix — resolving it could solve the problem without a bug report. You can still submit a report below.`,logHealthSummary:`Known issues found in your logs`,logHealthIntro:`Recent logs match known problems. Check the fixes below — resolving them could solve your issue without a bug report. You can still submit a report below.`,thankYou:`Thank you!`,submitted:`Your bug report has been submitted.`,viewIssue:`View Issue`,closeKeepsRecording:`You can close this panel while you reproduce the problem — recording keeps running, and reopening brings you back here.`,resumeRecording:`Bug report recording — {{elapsed}}. Click to finish.`,resumeReport:`Resume report`,unexpectedError:`An unexpected error occurred`},failureDetection:{title:`AI Failure Detection`,description:`Monitor prints with a self-hosted Obico ML API and act on detected failures automatically.`,mlUrl:`Obico ML API URL`,mlUrlHint:`Base URL of your self-hosted Obico ml_api container (e.g. http://192.168.1.10:3333).`,mlToken:`ML API Token (optional)`,mlTokenPlaceholder:`Leave empty if the server runs without ML_API_TOKEN`,mlTokenHint:`Must match the ML_API_TOKEN environment variable of your Obico ml_api container. Leave empty when the container runs without one.`,test:`Test`,testSuccess:`ML API reachable and healthy.`,testSuccessTokenUnknown:`ML API reachable and healthy. The token could not be checked.`,testFailed:`Could not reach the ML API.`,sensitivity:`Sensitivity`,sensitivityLow:`Low (fewer false positives)`,sensitivityMedium:`Medium (balanced)`,sensitivityHigh:`High (detect early, more false positives)`,sensitivityHint:`Adjusts the confidence thresholds that trigger warnings and failures.`,action:`Action on detected failure`,actionNotify:`Notify only`,actionPause:`Pause print`,actionPauseOff:`Pause and cut power`,pollInterval:`Poll interval (seconds)`,pollIntervalHint:`How often to check each printer while it is printing. Minimum 5s, maximum 120s.`,externalUrlMissing:`External URL is not set.`,externalUrlHint:`The ML API fetches the camera snapshot by URL. Set the External URL in General settings so the ML API container can reach Bambuddy.`,perPrinterTitle:`Monitored Printers`,perPrinterHint:`Choose which printers the detection service watches.`,monitorAll:`Monitor all connected printers`,statusTitle:`Status`,serviceRunning:`Service running`,thresholds:`Low / High thresholds`,activePrinters:`Active prints`,noActivePrints:`No prints currently running.`,historyTitle:`Recent Detections`,noHistory:`No detections yet.`},makerworld:{title:`MakerWorld`,description:`Paste a MakerWorld model URL to import and print it directly from Bambuddy — without leaving for the Bambu Handy app.`,pasteUrlHeader:`Import from MakerWorld`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… or paste any MakerWorld link`,resolveButton:`Resolve`,signInRequiredTitle:`Bambu Cloud sign-in required to download`,signInRequiredBody:`You can browse model details anonymously, but MakerWorld requires a Bambu Cloud account to download 3MF files.`,signInExpiredTitle:`Bambu Cloud sign-in expired`,signInExpiredBody:`You are still signed in to Bambuddy, but Bambu Lab has stopped accepting the stored token, so downloads will fail. Sign in to Bambu Cloud again.`,openCloudSettings:`Open Cloud settings`,untitledModel:`Untitled model`,byCreator:`by {{name}}`,downloadsCount:`{{count}} downloads`,licensePrefix:`License`,alreadyImported:`Already in library`,openOnMakerworld:`Open on MakerWorld`,alreadyInLibrary:`This model is already in your library — find it in File Manager → MakerWorld`,importSuccess:`Imported {{filename}} — saved to File Manager → MakerWorld`,platesHeader:`Plates ({{count}})`,plateDefaultName:`Plate {{n}}`,materialCount:`{{count}} filaments`,amsRequired:`AMS required`,slicedFor:`Sliced for {{printer}}`,alsoCompatible:`Also marked compatible: {{printers}}`,importToLibrary:`Save`,sliceIn:`Save & Slice in {{slicer}}`,disclaimer:`MakerWorld integration uses community-documented API endpoints. Bambuddy is not affiliated with or endorsed by MakerWorld or Bambu Lab.`,lastImportSuccess:`Imported to your library`,lastImportAlreadyInLibrary:`Already in your library`,viewInLibrary:`View in File Manager`,openInBambuStudio:`Open in Bambu Studio`,openInOrcaSlicer:`Open in OrcaSlicer`,importTo:`Import to file manager`,recentImportsHeader:`Recent imports`,phaseResolving:`Resolving`,phaseDownloading:`Downloading`,folderAuto:`MakerWorld (default)`,importAll:`Import all`,importAllProgress:`Importing {{current}}/{{total}}`,openGallery:`Open image gallery`,galleryPrev:`Previous image`,galleryNext:`Next image`,deleteImport:`Remove from library`,importDeleting:`Removing…`,importDeleted:`Removed from library`,confirmDelete:`Remove {{filename}} from the library? This deletes the local file but the plate can be re-imported from MakerWorld.`,errors:{resolveFailed:`Could not resolve that MakerWorld URL.`,downloadFailed:`Download failed. Please try again.`,deleteFailed:`Could not remove the file from the library.`}},gcodeViewer:{filamentSlot:`Filament {{n}}`,loading:`Reading toolpath…`,loadFailed:`Could not load the G-code for this file.`,showTravel:`Travel moves`,topLayer:`Top layer`,bottomLayer:`Bottom layer`,noSource:`No file was given to preview.`,view:{filament:`Filament`,feature:`Feature`,height:`Height`,width:`Width`},feature:{wall:`Walls`,sparseInfill:`Sparse infill`,solidInfill:`Solid infill`,bridge:`Bridge / overhang`,support:`Support`,skirt:`Skirt / brim`,gapFill:`Gap fill`,ironing:`Ironing`,primeTower:`Prime tower`},back:`Back`,backToArchives:`Back to Print Archives`,backToFiles:`Back to File Manager`,plates:`Plates`,plateN:`Plate {{n}}`},libraryTrash:{title:`Trash`,headerButton:`Trash`,headerTooltip:`View files moved to the trash`,backToFiles:`Back to File Manager`,subtitleAdmin:`Deleted files stay here for {{days}} days, then auto-delete. This view shows trashed files for all users.`,subtitleUser:`Deleted files stay here for {{days}} days, then auto-delete.`,loading:`Loading trash…`,loadError:`Could not load the trash.`,empty:`The trash is empty.`,summary:`{{count}} files · {{size}}`,emptyTrash:`Empty trash`,restore:`Restore`,purgeNow:`Delete now`,autoPurgeIn:`Auto-deletes in {{when}}`,days:`days`,retentionLabel:`Auto-delete after`,selectAll:`Select all`,selectOne:`Select {{filename}}`,selectionCount:`{{count}} selected`,bulkRestore:`Restore selected`,bulkPurge:`Delete selected`,col:{filename:`File`,folder:`Folder`,size:`Size`,deleted:`Moved to trash`,autoPurge:`Auto-deletes`,owner:`Owner`,actions:`Actions`},confirm:{purgeTitle:`Delete permanently?`,purgeBody:`{{filename}} will be deleted from disk and cannot be restored.`,emptyTitle:`Empty the trash?`,emptyBody:`All {{count}} files will be deleted from disk. This cannot be undone.`,bulkPurgeTitle:`Delete selected files permanently?`,bulkPurgeBody:`The {{count}} selected files will be deleted from disk and cannot be restored.`,cta:`Delete permanently`},toast:{restored:`File restored.`,restoreFailed:`Could not restore the file.`,purged:`File deleted permanently.`,purgeFailed:`Could not delete the file.`,emptied:`Deleted {{count}} file(s) from trash.`,emptyFailed:`Could not empty the trash.`,retentionSaved:`Auto-delete set to {{days}} days.`,retentionFailed:`Could not save retention setting.`,bulkRestored:`Restored {{count}} file(s).`,bulkPurged:`Deleted {{count}} file(s).`}},libraryPurge:{title:`Purge old files`,headerButton:`Purge old`,headerTooltip:`Bulk-move old files to trash`,description:`Sweep old files out of your library in one shot. Files with a print history are aged by their last-printed date; files that were never printed are aged by their upload date.`,ageLabel:`Move files older than`,days:`days`,includeNeverPrinted:`Include files that have never been printed`,effectsTitle:`What happens when you click Purge`,effect1:`Matching files are moved to Trash — they are not deleted from disk yet.`,effect2:`You can restore them from Trash at any time until the retention window expires.`,effect3:`After retention, the trash sweeper permanently removes them from disk.`,effect4:`Files in external (linked) folders are skipped — Bambuddy never deletes bytes it does not own.`,previewLoading:`Checking how many files match…`,previewFailed:`Could not preview the purge.`,previewSummary:`{{count}} files · {{size}} would move to trash`,andMore:`…and {{count}} more`,warning:`Trashed files still count against storage until the retention window expires. Empty the Trash afterwards to free disk immediately.`,confirmCta:`Move {{count}} to trash`,purging:`Moving to trash…`,toast:{success:`Moved {{count}} file(s) to trash.`,failed:`Could not purge files.`}},libraryAutoPurge:{enableLabel:`Auto-purge old files`,enableDescription:`Runs the admin purge once per day. Files go to Trash first — they are not deleted immediately.`,ageLabel:`Auto-purge files older than`,ageDescription:`Minimum 7 days, maximum 10 years. Uses the same age rule as the manual Purge button.`,days:`days`,includeNeverPrinted:`Include files that have never been printed`,saveFailed:`Could not save auto-purge settings.`},archivePurge:{headerButton:`Purge old`,headerTooltip:`Bulk-delete old archives`,title:`Purge old archives`,description:`Clear out old print history. Each archive is aged by its most recent print completion — reprinting an archive refreshes its age, so active work is never purged.`,ageLabel:`Delete archives not printed in the last`,days:`days`,effectsTitle:`What happens when you click Purge`,effect1:`Each matching archive is hidden from the listings and its files are removed from disk (3MF, thumbnail, timelapse, source 3MF, F3D design file, photos).`,effect2:`The archive row stays in the database so Quick Stats keeps the filament, time, cost, and energy contribution — same as the single-archive delete default.`,effect3:`Tick "Also remove from statistics" below to drop the Quick Stats contribution too (matches the single-archive delete option). That path is irreversible.`,effect4:`Reprinting an archive refreshes its age clock, so archives you still use are safe.`,purgeStatsLabel:`Also remove from statistics`,purgeStatsHint:`Drops the matching archives from Quick Stats (filament, time, cost, energy). Without this, Quick Stats keeps every contribution and only the files leave disk.`,previewLoading:`Checking how many archives match…`,previewFailed:`Could not preview the purge.`,previewSummary:`{{count}} archives · {{size}} would be removed`,andMore:`…and {{count}} more`,warning:`Files are removed from disk and cannot be restored. Download or favourite anything you want to keep before continuing.`,confirmCta:`Remove {{count}} archive(s)`,purging:`Removing…`,toast:{success:`Removed {{count}} archive(s).`,failed:`Could not purge archives.`}},archiveAutoPurge:{enableLabel:`Auto-purge old archives`,enableDescription:`Once per day, hides archives from the listings and removes their files from disk when they have not been printed within the threshold. Reprinting an archive resets the clock.`,ageLabel:`Auto-delete archives not printed in the last`,ageDescription:`Minimum 7 days, maximum 10 years. Based on the most recent print completion — reprinting an archive refreshes its age. Removes the 3MF, thumbnail, timelapse, source 3MF, F3D, and photos.`,days:`days`,purgeStatsLabel:`Also remove from statistics`,purgeStatsDescription:`When enabled, the daily sweeper also drops each purged archive from Quick Stats (filament, time, cost, energy). Default off — Quick Stats keeps the contribution, only the files leave disk.`,runNow:`Purge archives now`,saveFailed:`Could not save auto-purge settings.`},cameraTokens:{scope:{camera_stream:`Camera stream`,camwall:`Cam Wall`,overlay:`Streaming Overlay`},title:`Camera API Tokens`,navTitle:`Camera API tokens`,description:`Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Pick the scope when you create one; a token can be revoked at any time.`,loading:`Loading…`,confirmRevoke:{title:`Revoke this token?`,body:`Any device using "{{name}}" will lose access immediately. This cannot be undone.`,cancel:`Cancel`,confirm:`Revoke`},create:{scopeLabel:`Scope`,hintCameraStream:`A camera-stream token can only fetch camera streams and snapshots. Use it for Home Assistant, Frigate, or anything embedding a single camera.`,hintCamWall:`A Cam Wall token opens /camwall on a screen with no login. It can see every printer's name and state, and their camera streams. It cannot see filenames, addresses or access codes.`,hintOverlay:`A Streaming Overlay token opens /overlay/{printerId} on a screen with no login — for OBS or any live stream. It can see one printer's camera stream plus its live print status, including the filename shown on screen. It cannot see addresses or access codes.`,title:`Create new token`,nameLabel:`Token name`,namePlaceholder:`e.g. Home Assistant`,daysLabel:`Days until expiry`,submit:`Create`,hint:`Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now.`},created:{camWallUrlTitle:`Cam Wall URL for this display`,camWallUrlHint:`Open this on the screen. Anyone who can read the URL can watch the wall, so treat it like a key — revoke the token to cut the display off.`,overlayUrlTitle:`Overlay URL for OBS`,overlayUrlHint:`Add this as a Browser Source in OBS. Change the /overlay/1 number to your printer's number (from its URL on the Printers page). Anyone who can read the URL can watch the stream, so treat it like a key — revoke the token to cut it off.`,title:`Token created — copy it now`,warning:`This is the only time this token will be visible. After you close this dialog you can never view it again.`,copy:`Copy`,dismiss:`I've saved it`},list:{scope:`Scope`,myTitle:`My tokens`,allTitle:`All users (admin view)`,empty:`No tokens yet.`,name:`Name`,owner:`Owner`,prefix:`Prefix`,created:`Created`,expires:`Expires`,lastUsed:`Last used`,revoke:`Revoke`,expired:`Expired`},toast:{created:`Token created`,createFailed:`Failed to create token`,revoked:`Token revoked`,revokeFailed:`Failed to revoke token`,loadFailed:`Failed to load tokens`,copied:`Copied to clipboard`,copyFailed:`Copy failed — select and copy manually`}},forecast:{title:`Forecast`,noSpools:`No active spools found. Add spools to your inventory to see forecast data.`,noUsageData:`No usage data available — cannot project stock timeline.`,sku:`SKU`,material:`Material`,stock:`Stock`,dailyRate:`Rate`,daysLeft:`Days Left`,emptyBy:`Empty By`,reorderBy:`Reorder By`,actions:`Actions`,trend:`Trend`,estimated:`Est.`,noData:`No data`,timeframe:`Timeframe`,chartTitle:`Projected Stock — Top 5 Materials`,dashedLinesROP:`Dashed lines = reorder points`,stockLevel:`Stock Level`,reorderPoint:`Reorder Point`,safetyMargin:`Safety Margin`,trendLegend:`Trend (history-based, 95% service level)`,estimatedLegend:`Estimated (weight delta)`,noDataLegend:`No data`,ropLabel:`ROP`,ssLabel:`SS`,safetyStockLegend:`Safety stock`,stockArrivalLegend:`Stock arrival`,stockoutLegend:`Stockout`,alertCount_one:`{{count}} alert`,alertCount_other:`{{count}} alerts`,order:`Order`,save:`Save`,cancel:`Cancel`,settingsSaved:`Settings saved`,failedSaveSettings:`Failed to save settings`,globalLeadTimeSaved:`Global lead time saved`,globalLeadTime:`Global lead time`,globalLeadTimeHint:`Global lead time floor — used in reorder point calculation for all SKUs`,skuLeadTimeOverride:`Lead Time Override`,skuLeadTimeHint:`0 = use global lead time. Set >0 to override for this SKU.`,safetyMarginLabel:`Safety Margin`,effectiveLeadTime:`Effective Lead Time`,effectiveLeadTimeHint:`max(global {{global}}d, SKU {{sku}}d)`,reorderPointHint:`d̄ × LT + safety margin — order when stock hits this level`,safetyMarginHint:`Statistical safety stock (z=1.65 × σ × √LT) + user-defined buffer`,safetyMarginHintDays:`Buffer added on top of statistical safety stock.{{approx}}`,safetyMarginHintDaysApprox:` ≈ {{g}}g at current rate.`,safetyMarginHintG:`Fixed weight buffer added on top of statistical safety stock.{{approx}}`,safetyMarginHintGApprox:` ≈ {{days}}d at current rate.`,individualSpools:`Individual spools`,labelWeight:`Label`,spoolCount_one:`{{count}} spool`,spoolCount_other:`{{count}} spools`,stockBreakRisk:`Stock break risk`,stockBreakDetail:`{{days}}d remaining, lead time {{lt}}d.`,stockBreakBefore:`Stock break before replenishment`,reorderNow:`Reorder now`,reorderTriggerPassed:`Trigger date {{date}} has passed.`,shoppingList:`Shopping List`,shoppingListItems_one:`({{count}} item)`,shoppingListItems_other:`({{count}} items)`,shoppingListEmpty:`Shopping list is empty. Click the cart icon on any row to add items.`,addToCart:`Add to shopping list`,alertsSnoozed:`Mute alerts for this SKU`,alertsEnabled:`Unmute alerts for this SKU`,addedToCart:`Added to shopping list`,failedAddItem:`Failed to add item`,listView:`List`,logisticsView:`Logistics`,qty:`Qty`,weight:`Weight`,leadTime:`Lead Time`,expectedRestock:`Expected Restock`,status:`Status`,note:`Note`,pending:`Pending`,purchased:`Purchased`,received:`Received`,markPurchased:`Mark as purchased`,markReceived:`Mark as received — adds spools to Stock inventory`,resetToPending:`Reset to pending`,remove:`Remove`,clearAll:`Clear all`,downloadCsv:`CSV`,addToCartTitle:`Add to Shopping List`,byQuantity:`By Quantity`,byDuration:`By Duration`,numberOfSpools:`Number of spools`,lastHowManyDays:`Should last how many days?`,noUsageQty:`No usage data — quantity set to 1.`,noteOptional:`Note (optional)`,notePlaceholder:`e.g. for project X, urgent…`,addNSpools_one:`Add {{count}} spool`,addNSpools_other:`Add {{count}} spools`,onArrival:`On Arrival`,stockBreakIn:`Stock break in {{days}}d.`,stockRunsOutBefore:`Stock runs out before the {{lt}}d lead time elapses.`,atRate:`At {{rate}}g/day you need`,moreSpools_one:`{{count}} more spool`,moreSpools_other:`{{count}} more spools`,bridgeGap:`to bridge the gap.`,noReadAccess:`You do not have permission to view inventory forecasts.`,noWriteAccess:`You do not have permission to modify forecast settings.`}}},de:{translation:{nav:{printers:`Drucker`,archives:`Archiv`,queue:`Druckwarteschlange`,stats:`Statistiken`,profiles:`Profile`,maintenance:`Wartung`,projects:`Projekte`,finance:`Finanzen`,inventory:`Filament`,files:`Dateimanager`,makerworld:`MakerWorld`,notifications:`Benachrichtigungen`,settings:`Einstellungen`,system:`System`,collapseSidebar:`Seitenleiste einklappen`,expandSidebar:`Seitenleiste ausklappen`,update:`Aktualisieren`,updateAvailable:`Update verfügbar: v{{version}}`,updateAvailableBanner:`Version {{version}} ist verfügbar!`,viewUpdate:`Update anzeigen`,viewOnGithub:`Auf GitHub ansehen`,keyboardShortcuts:`Tastaturkürzel (?)`,switchToLight:`Zum hellen Modus wechseln`,switchToDark:`Zum dunklen Modus wechseln`,switchToSystem:`Zum Systemmodus wechseln`,smartSwitches:`Smart Switches`,logout:`Abmelden`,installApp:`App installieren`,installAppSuccess:`Bambuddy wurde installiert`},common:{plusNMore:`+{{count}} weitere`,save:`Speichern`,saving:`Speichern...`,cancel:`Abbrechen`,delete:`Löschen`,edit:`Bearbeiten`,add:`Hinzufügen`,close:`Schließen`,confirm:`Bestätigen`,loading:`Lädt...`,error:`Fehler`,errorLoading:`Fehler beim Laden`,retry:`Erneut versuchen`,success:`Erfolg`,warning:`Warnung`,enabled:`Aktiviert`,disabled:`Deaktiviert`,yes:`Ja`,no:`Nein`,on:`An`,off:`Aus`,all:`Alle`,none:`Keine`,search:`Suchen`,filter:`Filtern`,sort:`Sortieren`,refresh:`Aktualisieren`,download:`Herunterladen`,upload:`Hochladen`,uploading:`Hochladen...`,uploadFailed:`Hochladen fehlgeschlagen`,actions:`Aktionen`,status:`Status`,name:`Name`,user:`Benutzer`,description:`Beschreibung`,date:`Datum`,time:`Zeit`,hours:`Stunden`,minutes:`Minuten`,seconds:`Sekunden`,days:`Tage`,enable:`Aktivieren`,disable:`Deaktivieren`,permissions:`Berechtigungen`,noPrinters:`Keine Drucker konfiguriert`,noData:`Keine Daten verfügbar`,linkNotFound:`Link nicht gefunden`,required:`Erforderlich`,optional:`Optional`,dismiss:`Schließen`,apply:`Anwenden`,reset:`Zurücksetzen`,export:`Exportieren`,import:`Importieren`,clear:`Leeren`,selectAll:`Alle auswählen`,deselectAll:`Auswahl aufheben`,noChange:`— Keine Änderung —`,unchanged:`Unverändert`,unassigned:`Nicht zugewiesen`,unknown:`Unbekannt`,unknownError:`Unbekannter Fehler`,today:`Heute`,tomorrow:`Morgen`,asap:`Sofort`,overdue:`Überfällig`,now:`Jetzt`,collapse:`Einklappen`,expand:`Ausklappen`,previous:`Zurück`,next:`Weiter`,viewArchive:`Archiv anzeigen`,viewInFileManager:`Im Dateimanager anzeigen`,addedBy:`Hinzugefügt von {{username}}`,prints:`Drucke`,more:`+{{count}} weitere`,ascending:`Aufsteigend`,descending:`Absteigend`,back:`Zurück`,copy:`Kopieren`,copied:`Kopiert!`,printer:`Drucker`,remove:`Entfernen`,type:`Typ`,print:`Drucken`,rename:`Umbenennen`,move:`Verschieben`,create:`Erstellen`,duplicate:`Duplizieren`,left:`Links`,right:`Rechts`,run:`Ausführen`,running:`Wird ausgeführt...`},finance:{allTypes:`Alle Typen`,allCostCenters:`Alle Kostenstellen`,title:`Finanzen`,subtitle:`Wallet, persönliche Transaktionen und Kostenstellen`,noAccess:`Du hast keine Berechtigung, Finanzdaten anzuzeigen.`,personalView:`Persönliche Ansicht`,adminView:`Admin-Ansicht`,createCostCenter:`Kostenstelle erstellen`,adjustWallet:`Wallet anpassen`,addManualPrint:`Manuellen Druck nachtragen`,manageMembers:`Mitglieder der Kostenstelle verwalten`,currentBalance:`Persönlicher Kontostand`,transactions:`Transaktionen`,personalTransactions:`Persönliche Transaktionen`,costCenters:`Kostenstellen`,availableForPrinting:`Für Druckzuordnung verfügbar`,costCenterName:`Name`,budgetType:`Budgettyp`,monthlyBudget:`Monatsbudget`,totalBudget:`Gesamtbudget`,noBudget:`kein Budget gesetzt`,create:`Erstellen`,selectUser:`Benutzer auswählen`,transactionType:`Typ`,amount:`Betrag`,noCostCenter:`Keine Kostenstelle`,descriptionOptional:`Beschreibung (optional)`,applyAdjustment:`Anpassung anwenden`,memberCanPrint:`Mitglied darf drucken`,addMember:`Mitglied hinzufügen`,canPrint:`Darf drucken`,noMembers:`Keine Mitglieder zugewiesen.`,editCostCenter:`Kostenstelle bearbeiten`,myCostCenters:`Meine Kostenstellen`,costCentersHint:`Budgetgrenzen prüfen und Kosten im Blick behalten`,noCostCenters:`Keine Kostenstellen gefunden.`,owner:`Besitzer`,balance:`Kontostand`,unlimited:`Unbegrenzt`,budgetPolicyHint:`Kontostände dienen der Kostenübersicht. Drucke werden ausschließlich durch das Budget der ausgewählten Kostenstelle begrenzt; ohne Budget kann unbegrenzt gedruckt werden.`,budget:`Budget`,shared:`Geteilt`,cannotEditPrivateCostCenter:`Private Kostenstellen können hier nicht bearbeitet werden`,recentTransactions:`Aktuelle Transaktionen`,transactionsHint:`Nach Typ und Kostenstelle filtern`,first:`Erste`,prev:`Zurück`,next:`Weiter`,last:`Letzte`,pageNumberOf:`Seite {{page}} von {{total}}`,noTransactions:`Keine Transaktionen verfügbar.`,noTransactionsForFilter:`Keine Transaktionen entsprechen den ausgewählten Filtern.`,costCenter:`Kostenstelle`,balanceAfter:`Kontostand danach`,userWithId:`Benutzer #{{id}}`,partial:`Teilweise`,editTransaction:`Transaktion bearbeiten`,selectCostCenter:`Kostenstelle auswählen...`,costCenterRequired:`Bitte eine Kostenstelle auswählen`,amountExample:`z. B. 4,00`,manualAdjustmentExample:`z. B. Manuelle Anpassung`,userRequired:`Bitte einen Benutzer auswählen`,amountInvalid:`Betrag muss eine gültige Zahl sein`,createdCostCenter:`Kostenstelle erstellt`,createCostCenterFailed:`Kostenstelle konnte nicht erstellt werden`,transactionDeleted:`Transaktion gelöscht`,deleteTransactionFailed:`Transaktion konnte nicht gelöscht werden`,transactionEdited:`Transaktion aktualisiert und Ledger neu berechnet`,editTransactionFailed:`Transaktion konnte nicht bearbeitet werden`,manualPrintCreated:`Manueller Druck hinzugefügt und Ledger neu berechnet`,manualPrintFailed:`Manueller Druck konnte nicht erstellt werden`,memberSaved:`Mitglied gespeichert`,memberSaveFailed:`Mitglied konnte nicht gespeichert werden`,memberRemoved:`Mitglied entfernt`,memberRemoveFailed:`Mitglied konnte nicht entfernt werden`,costCenterNameRequired:`Kostenstellenname ist erforderlich`,costCenterUpdated:`Kostenstelle aktualisiert`,costCenterUpdateFailed:`Kostenstelle konnte nicht aktualisiert werden`,confirmDeleteCostCenter:`Kostenstelle "{{name}}" löschen?`,costCenterDeleted:`Kostenstelle gelöscht`,costCenterDeleteFailed:`Kostenstelle konnte nicht gelöscht werden`,deleteTransactionConfirm:`Diese Transaktion löschen? Die Salden werden automatisch neu berechnet.`,deposit:`Einzahlung`,withdraw:`Auszahlung`,printCharge:`Druckkosten`,deleteTransaction:`Transaktion löschen`},printers:{addPreflight:{checking:`Verbindung wird geprüft...`,warning:`Einige Verbindungsprüfungen sind fehlgeschlagen. Dieser Drucker wird möglicherweise als offline angezeigt. Prüfe die Punkte unten, behebe was möglich ist, oder speichere trotzdem.`,back:`Zurück`,saveAnyway:`Trotzdem speichern`},title:`Drucker`,addPrinter:`Drucker hinzufügen`,editPrinter:`Drucker bearbeiten`,deletePrinter:`Drucker löschen`,printerName:`Druckername`,serialNumber:`Seriennummer`,ipAddress:`IP-Adresse / Hostname`,accessCode:`Zugangscode`,model:`Modell`,nozzleCount:`Düsenanzahl`,autoArchive:`Automatische Archivierung`,status:{available:`Verfügbar`,idle:`Bereit`,printing:`Druckt`,paused:`Pausiert`,offline:`Offline`,problem:`Problem`,error:`Fehler`,finished:`Fertig`,unknown:`Unbekannt`},temperatures:{nozzle:`Düse`,bed:`Druckbett`,chamber:`Kammer`},heaterHistory:{title:`Heizungsverlauf`,openLabel:`Heizungsverlauf anzeigen`,nozzle:`Düse`,nozzle2:`Düse 2`,bed:`Druckbett`,chamber:`Kammer`,error:`Verlauf konnte nicht geladen werden`,empty:`Noch keine Daten aufgezeichnet`},progress:`{{percent}}% abgeschlossen`,timeRemaining:`Noch {{time}}`,deleteConfirm:`Möchten Sie "{{name}}" wirklich löschen?`,maintenanceOk:`Wartung OK`,maintenanceWarning:`{{count}} Warnung`,maintenanceWarning_plural:`{{count}} Warnungen`,maintenanceDue:`{{count}} fällig`,maintenanceDue_plural:`{{count}} fällig`,sort:{name:`Name`,status:`Status`,model:`Modell`,location:`Standort`,eta:`Restzeit`,ascending:`Aufsteigend sortieren`,descending:`Absteigend sortieren`},cardSize:{small:`Kleine Karten`,medium:`Mittlere Karten`,large:`Große Karten`,extraLarge:`Extra große Karten`},pageView:{openCamWallPage:`Kamera-Wand als Seite öffnen`,cards:`Karten`,camWall:`Kamera-Wand`},camWall:{page:{tokenRejected:`Dieser Kamera-Wand-Link ist nicht mehr gültig. Das Token ist möglicherweise abgelaufen oder wurde widerrufen.`,loadFailed:`Die Drucker konnten nicht geladen werden.`},noPrinters:`Keine Drucker anzuzeigen`,noSignal:`Kein Signal`,live:`Live`,snap:`Foto`,off:`Aus`,summary:`{{live}} live, {{snap}} Schnappschüsse, {{total}} insgesamt`,layer:`Schicht {{cur}}/{{total}}`,timeLeft:`noch {{time}}`,statusMode:{off:`Aus`,compact:`Kompakt`,full:`Voll`},settings:{title:`Kamera-Wand-Einstellungen`,maxLive:`Max. Live-Streams`,maxLiveHint:`Wie viele Kacheln gleichzeitig live streamen. Andere aktualisieren als Schnappschüsse.`,snapshotInterval:`Schnappschuss-Intervall (Sekunden)`,snapshotIntervalHint:`Wie oft Nicht-Live-Kacheln einen neuen Schnappschuss abrufen.`,statusOverlay:`Status-Overlay`,statusOverlayHint:`Kompakt: nur Status-Plakette. Voll: + Fortschritt, Schicht, Restzeit.`}},hideOffline:`Offline ausblenden`,nextAvailable:`Nächster verfügbar`,powerOn:`Einschalten`,offlinePrintersWithPlugs:`Offline-Drucker mit Smart-Plugs`,noPrintersConfigured:`Noch keine Drucker konfiguriert`,search:`Drucker suchen...`,noSearchResults:`Keine Drucker entsprechen deiner Suche oder deinen Filtern`,filter:{allStatuses:`Alle Status`,allLocations:`Alle Standorte`},toolbar:{filters:`Filter`,view:`Ansicht`,actions:`Aktionen`},readyToPrint:`Druckbereit`,external:`Extern`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Druckarchive löschen`,noLabel:`Keine Bezeichnung`,printPreview:`Druckvorschau`,width:`Breite`,height:`Höhe`,noObjectsFound:`Keine Objekte gefunden`,objectsLoadedOnPrintStart:`Objekte werden beim Druckstart geladen`,willBeSkipped:`Wird übersprungen`,name:`Name`,serialCannotBeChanged:`Seriennummer kann nicht geändert werden`,locationHelp:`Dient zur Gruppierung von Druckern und zum Filtern von Warteschlangenaufträgen`,wifiSignal:{veryWeak:`Sehr schwach`,weak:`Schwach`,fair:`Ausreichend`,good:`Gut`,excellent:`Ausgezeichnet`},maintenanceUpToDate:`Alle Wartungen aktuell - Klicken zum Anzeigen`,maintenance:{title:`In Wartung`,subtitle:`Dieser Drucker ist pausiert — keine Verbindung, nicht für die Warteschlange verfügbar, keine Benachrichtigungen.`,pillLabel:`Wartung`,exitButton:`Wartung beenden`,menuEnter:`In den Wartungsmodus wechseln`,menuExit:`Wartungsmodus beenden`,toastEntered:`{{name}} ist jetzt im Wartungsmodus`,toastExited:`{{name}} ist wieder online`,confirmMidPrintTitle:`Wartungsmodus während des Drucks aktivieren?`,confirmMidPrintMessage:`{{name}} druckt gerade. Der Wartungsmodus trennt die MQTT-Verbindung und beendet das Fortschritts-Tracking sowie Abschlussbenachrichtigungen für diesen Auftrag. Fortfahren?`,editFieldLabel:`Wartungsmodus`,editFieldHelp:`Wenn aktiviert, ist dieser Drucker von MQTT, Warteschlangenversand und Benachrichtigungen pausiert — nützlich für Reparaturen, parallele Bambuddy-Installationen oder temporäre Außerbetriebnahme.`},chamberLightOn:`Kammerbeleuchtung einschalten`,chamberLightOff:`Kammerbeleuchtung ausschalten`,files:`Dateien`,browseFiles:`Druckerdateien durchsuchen`,autoOffAfterPrint:`Automatisches Ausschalten nach Druck`,autoOffExecuted:`Auto-off wurde ausgeführt - Drucker einschalten zum Zurücksetzen`,hmsErrors:`HMS-Fehler`,viewHmsErrors:`{{count}} HMS-Fehler anzeigen`,resume:`Fortsetzen`,pause:`Pausieren`,stop:`Stoppen`,camera:`Kamera`,skipObject:`Objekt überspringen`,reconnect:`Neu verbinden`,forceRefresh:`Aktualisierung erzwingen`,forceRefreshSuccess:`Aktualisierung angefordert`,mqttDebug:`MQTT-Debug`,printerInformation:`Druckerinformationen`,copyToClipboard:`Kopieren`,copied:`Kopiert!`,state:`Zustand`,wifiSignalLabel:`WLAN-Signal`,developerMode:`Entwicklermodus`,enabled:`Aktiviert`,disabled:`Deaktiviert`,addedOn:`Hinzugefügt`,sdCard:`SD-Karte`,inserted:`Eingelegt`,notInserted:`Nicht eingelegt`,totalPrintHours:`Druckstunden`,activeNozzle:`Aktiv: {{nozzle}} Düse`,amsSwitchInletTooltip:`Filamentweiche IN-{{inlet}} ({{side}}) — versorgt beide Düsen`,nozzleRack:`Düsenhalter`,nozzleDocked:`Angedockt`,nozzleMounted:`Montiert`,nozzleActive:`Aktiv`,nozzleIdle:`Inaktiv`,nozzleDiameter:`Durchmesser`,nozzleType:`Typ`,nozzleStatus:`Status`,nozzleFilament:`Filament`,nozzleWear:`Verschleiß`,nozzleMaxTemp:`Max. Temp`,nozzleSerial:`Seriennr.`,nozzleHardenedSteel:`Gehärteter Stahl`,nozzleStainlessSteel:`Edelstahl`,nozzleTungstenCarbide:`Wolframkarbid`,nozzleFlow:`Durchfluss`,nozzleHighFlow:`Hoher Durchfluss`,nozzleStandardFlow:`Standard`,firmwareUpdate:`Firmware-Update`,firmwareInstructions:`Gehen Sie auf dem Touchscreen des Druckers zu`,firmwareNav:`Navigieren Sie zu`,settings:`Einstellungen`,firmware:`Firmware`,discoverPrinters:`Drucker entdecken`,searching:`Suche...`,manualEntry:`Manuelle Eingabe`,addFromCloud:`Aus Cloud hinzufügen`,toast:{printerDeleted:`Drucker gelöscht`,missingSpoolAssignment:`Druck gestartet auf {{printer}}. Fehlende Spulenzuordnung für: {{slots}}`,killSwitchTriggered:`Der Billing-Kill-Switch hat einen nicht autorisierten Druck auf {{printer}} gestoppt: {{filename}}`,billingChargeFailed:`Die Abrechnung für {{filename}} auf {{printer}} ist fehlgeschlagen. Die Budgetreservierung bleibt bestehen; prüfe die Serverprotokolle.`,assignmentVerified:`Filament in Slot {{slot}} geladen ({{printer}})`,assignmentVerifiedNoKprofile:`Slot {{slot}} auf {{printer}} geladen, aber das Fluss-Kalibrierungsprofil (K-Profil) wurde nicht übernommen`,assignmentNotConfirmed:`Zuordnung für Slot {{slot}} auf {{printer}} konnte nicht bestätigt werden – bitte den AMS-Slot prüfen`,printerAdded:`Drucker hinzugefügt`,printerUpdated:`Drucker aktualisiert`,failedToDelete:`Drucker konnte nicht gelöscht werden`,failedToAdd:`Drucker konnte nicht hinzugefügt werden`,connectionFailedNotAdded:`Keine Verbindung zum Drucker möglich. Prüfen Sie IP-Adresse, Seriennummer und Zugangscode und stellen Sie sicher, dass der Nur-LAN-Modus aktiv ist. Der Drucker wurde nicht hinzugefügt.`,failedToUpdate:`Drucker konnte nicht aktualisiert werden`,commandSent:`Befehl gesendet`,failedToSendCommand:`Befehl konnte nicht gesendet werden`,turnedOn:`{{name}} eingeschaltet`,failedToPowerOn:`{{name}} konnte nicht eingeschaltet werden`,scriptTriggered:`Skript ausgelöst`,printStopped:`Druck gestoppt`,printPaused:`Druck pausiert`,printResumed:`Druck fortgesetzt`,referenceDeleted:`Referenz gelöscht`,detectionAreaSaved:`Erkennungsbereich gespeichert`,failedToRunScript:`Skript konnte nicht ausgeführt werden`,failedToStopPrint:`Druck konnte nicht gestoppt werden`,failedToPausePrint:`Druck konnte nicht pausiert werden`,failedToResumePrint:`Druck konnte nicht fortgesetzt werden`,failedToControlChamberLight:`Kammerbeleuchtung konnte nicht gesteuert werden`,failedToSetSpeed:`Druckgeschwindigkeit konnte nicht eingestellt werden`,failedToUpdateSetting:`Einstellung konnte nicht aktualisiert werden`,failedToSkipObjects:`Objekte konnten nicht übersprungen werden`,failedToRereadRfid:`RFID konnte nicht erneut gelesen werden`,failedToCheckPlate:`Platte konnte nicht überprüft werden`,failedToUpdateLabel:`Bezeichnung konnte nicht aktualisiert werden`,failedToDeleteReference:`Referenz konnte nicht gelöscht werden`,failedToSaveDetectionArea:`Erkennungsbereich konnte nicht gespeichert werden`,plateCheckEnabled:`Plattenprüfung aktiviert`,plateCheckDisabled:`Plattenprüfung deaktiviert`,calibrationSaved:`Kalibrierung gespeichert!`,calibrationFailed:`Kalibrierung fehlgeschlagen`,rfidRereadInitiated:`RFID-Neueinlesen gestartet`,loadInitiated:`Filament wird geladen…`,unloadInitiated:`Filament wird entladen…`,failedToLoad:`Filament konnte nicht geladen werden`,failedToUnload:`Filament konnte nicht entladen werden`},connection:{connected:`Verbunden`,offline:`Offline`},plateStatus:{markCleared:`Platte als freigegeben markieren`,cleared:`Platte freigegeben`,notCleared:`Platte nicht freigegeben`,inUse:`Platte in Benutzung`},queue:{inQueue:`{{count}} Druck in Warteschlange`,inQueue_plural:`{{count}} Drucke in Warteschlange`},controls:`Steuerung`,rfid:{reread:`RFID neu lesen`},ams:{load:`Laden`,unload:`Entladen`,feedTitle:`{{slot}} in welche Düse laden?`,feedPrompt:`Der Filament Track Switch kann diesen Slot zu beiden Hotends leiten. Wähle, welches beschickt werden soll.`,feedLeft:`Linke Düse`,feedRight:`Rechte Düse`,feedAlreadyLoaded:`Bereits geladen`,switchNotReady:`Der Filament Track Switch ist noch nicht eingerichtet. Weise am Drucker jedem AMS einen Eingang zu und versuche es erneut.`},bedJog:{limitWarning:`Verfahrwege werden bei manuellen Bewegungen nicht begrenzt – ein Firmware-Fehler von Bambu ignoriert die Software-Endschalter bei Remote-Befehlen. Bewegen Sie vorsichtig, um Kollisionen zu vermeiden.`,title:`Jog-Steuerung`,bed:`Bett`,step:`Schritt (mm)`,up:`Platte hoch`,down:`Platte runter`,toolheadUp:`Druckkopf hoch`,toolheadDown:`Druckkopf runter`,disabledWhilePrinting:`Während des Drucks deaktiviert`,notHomedTitle:`Drucker ist nicht referenziert`,notHomedMessage:`Der Drucker wurde seit dem letzten Druck nicht referenziert. Führen Sie zuerst die automatische Referenzfahrt aus (parkt den Werkzeugkopf und referenziert dann X, Y und Z) oder bewegen Sie trotzdem — die Software-Endschalter werden dabei umgangen.`,homeZ:`Automatische Referenzfahrt`,moveAnyway:`Trotzdem bewegen`,homingStarted:`Drucker wird automatisch referenziert…`},permission:{noAdd:`Sie haben keine Berechtigung, Drucker hinzuzufügen`,noEdit:`Sie haben keine Berechtigung, Drucker zu bearbeiten`,noDelete:`Sie haben keine Berechtigung, Drucker zu löschen`,noControl:`Sie haben keine Berechtigung, Drucker zu steuern`,noFiles:`Sie haben keine Berechtigung, auf Druckerdateien zuzugreifen`,noAmsRfid:`Sie haben keine Berechtigung, AMS-RFID erneut zu lesen`,noSmartPlugControl:`Sie haben keine Berechtigung, Smart Plugs zu steuern`,noCamera:`Sie haben keine Berechtigung, Kameras anzuzeigen`},modal:{addTitle:`Drucker hinzufügen`,editTitle:`Drucker bearbeiten`,myPrinter:`Mein Drucker`,selectModel:`Modell auswählen...`,locationGroup:`Standort / Gruppe (optional)`,locationPlaceholder:`z.B. Werkstatt, Büro, Keller`,autoArchiveLabel:`Abgeschlossene Drucke automatisch archivieren`,fromPrinterSettings:`Aus Druckereinstellungen`,modelOptional:`Modell (optional)`,saveChanges:`Änderungen speichern`},skipObjects:{tooltip:`Objekte überspringen`,onlyWhilePrinting:`Objekte überspringen (nur während des Drucks)`,requiresMultiple:`Objekte überspringen (erfordert 2+ Objekte)`,title:`Objekte überspringen`,matchIdsInfo:`IDs mit Drucker-Display abgleichen`,printerShowsIds:`Der Druckerbildschirm zeigt Objekt-IDs auf der Bauplatte`,skipSelected:`Ausgewählte überspringen`,skipping:`Überspringe...`,noObjectsSelected:`Keine Objekte ausgewählt`,selectObjectsToSkip:`Wählen Sie Objekte aus, die Sie vom aktuellen Druck überspringen möchten`,skipped:`übersprungen`,objectsSkipped:`Objekte übersprungen`,activeCount:`{{count}} aktiv`,waitForLayer:`Warten Sie auf Schicht 2+ zum Überspringen von Objekten (aktuell Schicht {{layer}})`,skip:`Überspringen`,confirmTitle:`Objekt überspringen?`,confirmMessage:`Möchten Sie "{{name}}" wirklich überspringen? Dies kann nicht rückgängig gemacht werden.`,confirmAllMessage:`Alle verbleibenden Objekte sind ausgewählt. Dadurch wird der Druckauftrag beendet. Fortfahren?`,confirmMultipleMessage:`{{count}} ausgewählte Objekte überspringen? Dies kann nicht rückgängig gemacht werden.`},confirm:{deleteTitle:`Drucker löschen`,deleteMessage:`Möchten Sie "{{name}}" wirklich löschen? Alle Verbindungseinstellungen werden entfernt.`,deleteArchivesNote:`Der gesamte Druckverlauf für diesen Drucker wird dauerhaft gelöscht.`,keepArchivesNote:`Der Druckverlauf wird beibehalten, aber nicht mehr mit diesem Drucker verknüpft.`,stopTitle:`Druck stoppen`,stopMessage:`Möchten Sie den aktuellen Druck auf "{{name}}" wirklich stoppen? Der Druckauftrag wird abgebrochen.`,stopButton:`Druck stoppen`,pauseTitle:`Druck pausieren`,pauseMessage:`Möchten Sie den aktuellen Druck auf "{{name}}" wirklich pausieren?`,pauseButton:`Druck pausieren`,resumeTitle:`Druck fortsetzen`,resumeMessage:`Möchten Sie den Druck auf "{{name}}" fortsetzen?`,resumeButton:`Druck fortsetzen`,powerOnTitle:`Drucker einschalten`,powerOnMessage:`Möchten Sie die Stromversorgung für "{{name}}" wirklich EINSCHALTEN?`,powerOnButton:`Einschalten`,powerOffTitle:`Drucker ausschalten`,powerOffMessage:`Möchten Sie die Stromversorgung für "{{name}}" wirklich AUSSCHALTEN?`,powerOffWarning:`WARNUNG: "{{name}}" druckt gerade! Möchten Sie die Stromversorgung wirklich AUSSCHALTEN? Dies unterbricht den Druck und kann den Drucker beschädigen.`,powerOffButton:`Ausschalten`,haToggleTitle:`"{{name}}" umschalten`,haToggleMessage:`Home-Assistant-Entität {{entity}} umschalten? Das kann die Stromversorgung ausschalten, falls sie gerade an ist.`,haToggleWarning:`WARNUNG: "{{name}}" druckt gerade! Umschalten von {{entity}} kann die Stromversorgung trennen und den Druck abbrechen. Fortfahren?`,haToggleButton:`Umschalten`},bulk:{select:`Auswählen`,selectAll:`Alle auswählen`,selectByLocation:`Nach Standort auswählen`,selected:`{{count}} ausgewählt`,actions:{stop:`Stoppen`,pause:`Pausieren`,resume:`Fortsetzen`,clearPlate:`Druckbett leeren`,clearHMS:`Benachrichtigungen löschen`},confirm:{stopTitle:`{{count}} Drucke stoppen`,stopMessage:`Dies wird aktive Drucke auf {{count}} Drucker(n) abbrechen. Diese Aktion kann nicht rückgängig gemacht werden.`,stopButton:`Alle stoppen`,pauseTitle:`{{count}} Drucke pausieren`,pauseMessage:`Dies wird aktive Drucke auf {{count}} Drucker(n) pausieren.`,pauseButton:`Alle pausieren`,clearPlateTitle:`{{count}} Druckbetten leeren`,clearPlateMessage:`Dies wird das Druckbett auf {{count}} Drucker(n) leeren und kann wartende Aufträge starten.`,clearPlateButton:`Alle leeren`},success:`{{action}} auf {{count}} Drucker(n) abgeschlossen`,partial:`{{succeeded}} erfolgreich, {{failed}} fehlgeschlagen`,noneApplicable:`Keine ausgewählten Drucker sind im richtigen Zustand für diese Aktion`,selectByState:`Nach Status auswählen`},discovery:{title:`Drucker entdecken`,searching:`Suche...`,scanning:`Scanne...`,scanProgress:`Scanne... {{scanned}}/{{total}}`,foundPrinters:`{{count}} Drucker gefunden`,noPrintersFound:`Keine Drucker gefunden`,noPrintersFoundSubnet:`Keine Drucker im angegebenen Subnetz gefunden.`,noPrintersFoundNetwork:`Keine Drucker im Netzwerk gefunden.`,allConfigured:`Alle erkannten Drucker sind bereits konfiguriert.`,alreadyAdded:`Bereits hinzugefügt`,select:`Auswählen`,manualEntry:`Manuelle Eingabe`,addFromCloud:`Aus Cloud hinzufügen`,subnetToScan:`Zu scannendes Subnetz`,dockerNote:`Docker erkannt. Geben Sie das Subnetz Ihres Druckers in CIDR-Notation ein. Erfordert network_mode: host in docker-compose.yml.`,scanSubnet:`Subnetz nach Druckern scannen`,discoverNetwork:`Drucker im Netzwerk suchen`,scanningSubnet:`Subnetz wird nach Bambu-Druckern gescannt...`,scanningNetwork:`Netzwerk wird gescannt...`,serialRequired:`Seriennummer erforderlich`,unknown:`Unbekannt`,failedToStart:`Erkennung konnte nicht gestartet werden`,customSubnetOption:`Eigenes Subnetz...`,customSubnetLabel:`Eigenes Subnetz (CIDR)`,customSubnetNote:`Wähle ein eigenes Subnetz, wenn dein Drucker in einem anderen Netzwerk als dieser Server steht. Die Ports FTP (990) und MQTT (8883) müssen über die Routinggrenze erreichbar sein.`},drying:{start:`Trocknung starten`,stop:`Trocknung stoppen`,temperature:`Temperatur`,duration:`Dauer`,hours:`Stunden`,timeRemaining:`{{time}} verbleibend`,active:`Trocknung`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`Trocknung nicht unterstützt`,powerRequired:`AMS-Netzteil anschließen, um Trocknung zu aktivieren`,cannotDryNow:`AMS kann das Trocknen gerade nicht starten`,startingDrying:`Trocknung wird gestartet...`,toastCommandSent:`Trocknungsbefehl gesendet`,toastStopped:`Trocknung gestoppt`,toastNotStarted:`Der Drucker hat den Befehl angenommen, aber das AMS hat die Trocknung nicht gestartet. Prüfe, ob das AMS-Netzteil angeschlossen ist und der Drucker im Leerlauf ist.`,screenOnly:`Die AMS-Trocknung kann bei diesem Drucker nur am Bildschirm des Druckers selbst gesteuert werden (Einschränkung von Bambu)`,stoppingDrying:`Trocknung wird gestoppt...`,rotateTray:`Spule während der Trocknung drehen`,rotateUnavailableReason:`Nicht verfügbar — in diesem AMS ist ein Slot zum Druckkopf hin geladen. Die Spule ist durch den Zuführschlauch blockiert und kann nicht rotieren. Filament zuerst zurückziehen.`,startMode:`Startzeit`,modeNow:`Jetzt`,modeDelay:`Nach Verzögerung`,modeAtTime:`Zu Uhrzeit`,schedule:`Planen`,scheduledFor:`Trocknung geplant für {{time}}`,scheduledAsap:`Trocknung geplant (wartet auf Drucker)`,cancelScheduled:`Geplante Trocknung abbrechen`,scheduleFailed:`Trocknung konnte nicht geplant werden`,retractFilament:`Filament am AMS-Ausgang zurückziehen, um die Trocknung zu starten`,waitingAmsNotFound:`Warten, bis das AMS erkannt wird`,waitingOffline:`Warten, bis der Drucker online ist`,waitingPrinterBusy:`Warten, bis der Drucker frei ist`,waitingAlreadyDrying:`Warten, bis der laufende Trocknungszyklus beendet ist`,waitingInterrupted:`Unterbrochen, startet erneut, sobald der Drucker frei ist`,scheduleFailedReason:`Geplante Trocknung fehlgeschlagen: {{reason}}`,scheduleFailedUnknown:`Unbekannter Fehler`,dismissFailed:`Ausblenden`},amsBackup:{titleOn:`AMS Filament Backup ist EIN. Zum Deaktivieren klicken.`,titleOff:`AMS Filament Backup ist AUS. Zum Aktivieren klicken.`,titleUnknown:`AMS-Filament-Backup-Status auf diesem Drucker nicht verfügbar.`,toastEnabled:`AMS Filament Backup aktiviert`,toastDisabled:`AMS Filament Backup deaktiviert`,modalTitle:`AMS Filament Backup`,modalHelp:`Wenn der aktive Slot leer wird, wechselt der Drucker in dieser Reihenfolge zu Slots mit demselben Preset und derselben Farbe.`,modalNoSlots:`Kein Filament geladen.`,modalNoPairs:`Keine Backup-Paare — keine zwei Slots teilen sich Filament-Preset und Farbe.`,extruderRightShort:`R`,extruderLeftShort:`L`,stateOn:`Aktiviert`,stateOff:`Deaktiviert`,stateUnknown:`Auf diesem Drucker nicht unterstützt`},activeJobSlot:{title:`Dieser Slot ist Filament {{n}} im aktiven Druck`,ariaLabel:`Aktiver Druck-Slot {{n}}`},expectedSlot:{title:`Der Drucker wartet auf Filament in diesem Slot`,ariaLabel:`Erwarteter Filament-Slot {{n}}`,label:`{{ams}} · Slot {{slot}}`,external:`Externe Spule`},filaments:`Filamente`,externalSpool:{hide:`Externe Spule ausblenden`,show:`Externe Spule einblenden`},openCameraOverlay:`Kamera-Overlay öffnen`,openCameraWindow:`Kamera in neuem Fenster öffnen`,firmwareUpdateAvailable:`Firmware-Update verfügbar: {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — Aktuell`,firmwareUpdateButton:`Aktualisieren`,plateDetection:{noPermission:`Sie haben keine Berechtigung, Drucker zu aktualisieren`,enabledClick:`Plattenprüfung aktiviert - Klicken zum Deaktivieren`,disabledClick:`Plattenprüfung deaktiviert - Klicken zum Aktivieren`,manageCalibration:`Platten-Erkennungskalibrierung verwalten`,calibrationRequired:`Kalibrierung erforderlich`,calibrationInstructions:`Bitte stellen Sie sicher, dass die Druckplatte <strong>vollständig leer</strong> ist, und klicken Sie dann auf Kalibrieren.`,calibrationDescription:`Die Kalibrierung erfasst ein Referenzbild der leeren Platte. Zukünftige Prüfungen vergleichen mit dieser Referenz, um Objekte zu erkennen.`,calibrationTip:`<strong>Tipp:</strong> Sie können bis zu 5 Kalibrierungen für verschiedene Platten speichern. Das System verwendet automatisch die beste Übereinstimmung bei der Prüfung.`,plateEmpty:`Platte erscheint leer`,objectsDetected:`Objekte auf Platte erkannt`,confidence:`Konfidenz`,difference:`Differenz`,analysisPreview:`Analysevorschau:`,analysisLegend:`Grüner Rahmen = Erkennungsbereich, Rote Überlagerung = Unterschiede zur Kalibrierung`,savedReferences:`Gespeicherte Referenzen ({{count}}/{{max}})`,deleteReference:`Referenz löschen`,labelPlaceholder:`Bezeichnung...`,clickToEdit:`{{label}} - Zum Bearbeiten klicken`,clickToAddLabel:`Zum Hinzufügen einer Bezeichnung klicken`},speed:{title:`Druckgeschwindigkeit`,silent:`Leise (50%)`,standard:`Standard (100%)`,sport:`Sport (124%)`,ludicrous:`Ludicrous (166%)`},airduct:{title:`Luftkanal-Modus`,cooling:`Kühlen`,heating:`Heizen`},noSdCard:`Keine SD`,door:{open:`Offen`,closed:`Zu`},fans:{partCooling:`Bauteilkühlung`,auxiliary:`Hilfsventilator`,leftAuxiliary:`Linker Hilfsventilator`,exhaust:`Abluft`,chamber:`Kammerventilator`},clickToViewHmsErrors:`Klicken, um HMS-Fehler anzuzeigen`,aiDetection:{safe:`Sicher`,warning:`Warnung`,failure:`Fehldruck`,idle:`Bereit`,error:`Prüft nicht`,unknown:`Startet`,tooltipError:`KI-Fehlererkennung prüft diesen Druck nicht: {{reason}} - klicken für Details`,tooltipUnknown:`KI-Fehlererkennung: warte auf das erste Ergebnis - klicken für Details`,errorHint:`Dieser Druck wird nicht geprüft. Die Erkennung läuft automatisch weiter, sobald das Problem unten behoben ist.`,tooltip:`KI-Fehlererkennung: {{status}} (Score {{score}}) - klicken für Details`,tooltipIdle:`KI-Fehlererkennung aktiviert - Überwachung startet mit dem nächsten Druck - klicken für Details`,modalTitle:`KI-Fehlererkennung - {{name}}`,currentStatus:`Status`,score:`Score`,framesAnalyzed:`Analysierte Bilder`,idleHint:`Derzeit wird kein Druck überwacht. Die Überwachung startet automatisch mit dem nächsten Druck.`,lastError:`Letzter Fehler`,openSettings:`Einstellungen öffnen`},estimatedCompletion:`Geschätzte Fertigstellungszeit`,plateNumber:`Platte {{number}}`,slotOptions:`Slot-Optionen`,amsPopup:{friendlyName:`AMS-Name`,friendlyNamePlaceholder:`z. B. AMS-Anzeigename`,serialNumber:`Seriennummer`,firmwareVersion:`Firmware`,save:`Speichern`,clear:`Löschen`,noEditPermission:`Sie haben keine Berechtigung, AMS-Einheiten umzubenennen`},firmwareModal:{title:`Firmware-Update`,titleUpToDate:`Firmware-Info`,currentVersion:`Aktuell:`,latestVersion:`Neueste:`,releaseNotes:`Versionshinweise`,checkingPrereqs:`Prüfe Voraussetzungen...`,sdCardReady:`SD-Karte bereit. Klicken Sie unten, um die Firmware hochzuladen.`,uploadedSuccess:`Firmware auf SD-Karte hochgeladen!`,applyInstructions:`So wenden Sie das Update auf Ihrem Drucker an:`,step1:`Gehen Sie auf dem Touchscreen des Druckers zu <strong>Einstellungen</strong>`,step2:`Navigieren Sie zu <strong>Firmware</strong>`,step3:`Wählen Sie <strong>Update von SD-Karte</strong>`,step4:`Das Update dauert 10-20 Minuten`,done:`Fertig`,starting:`Starte...`,uploadFirmware:`Firmware hochladen`,uploadFailed:`Upload fehlgeschlagen: {{error}}`,uploadedToast:`Firmware hochgeladen! Starten Sie das Update vom Druckerbildschirm.`,availableVersions:`Verfügbare Versionen`,usable:`Installierbar`,unavailable:`Nicht verfügbar`,installed:`Installiert`,newerBadge:`neuer`,olderBadge:`älter`,currentBadge:`aktuell`},accessCodePlaceholder:`Leer lassen, um den aktuellen zu behalten`,roi:{title:`Erkennungsbereich (ROI)`,xStart:`X-Start`,yStart:`Y-Start`,width:`Breite`,height:`Höhe`,instruction:`Passen Sie den Erkennungsbereich an, um sich auf die Druckplatte zu konzentrieren. Der grüne Rahmen in der Vorschau zeigt den aktuellen Bereich.`},developerModeWarning:`Der Entwickler-LAN-Modus ist nicht aktiviert auf: {{names}}. Einige Funktionen funktionieren möglicherweise nicht.`,howToEnable:`Aktivieren`,incompatibleFile:`Diese Datei wurde für {{slicedFor}} geslicet, aber dieser Drucker ist ein {{printerModel}}`,dropNotPrintable:`Nur .gcode- und .gcode.3mf-Dateien können gedruckt werden`,dropToPrint:`Zum Drucken ablegen`,dropToQueue:`Zum Einreihen ablegen`},archives:{media:{title:`Druckvideos`,download:`Druckvideos herunterladen`,searching:`Der Drucker wird nach Videos durchsucht…`,searchFailed:`Der Drucker konnte nicht nach Videos durchsucht werden.`,none:`Für diesen Druck wurden keine Zeitraffer- oder IP-Kamera-Clips gefunden.`,attachedTimelapse:`Angehängter Zeitraffer`,printerFiles:`Noch auf dem Drucker vorhandene Dateien`,downloadSelected:`Auswahl herunterladen`,printerMissing:`Der Drucker ist nicht mehr konfiguriert`,timelapseUnavailable:`Das Zeitrafferverzeichnis konnte nicht gelesen werden`,ipcamUnavailable:`Das IP-Kamera-Verzeichnis konnte nicht gelesen werden`},title:`Druckarchiv`,no3mfBanner:{title:`Einige kürzliche Drucke konnten nicht mit Vorschaubild archiviert werden`,body:`Der Slicer hat die .gcode.3mf-Datei nicht auf der SD-Karte des Druckers hinterlegt, daher konnte Bambuddy weder Vorschaubild noch Slicer-Metadaten abrufen. Üblicherweise liegt das daran, dass "Gesendete Dateien auf externem Speicher speichern" im Slicer (Geräte-Tab in Bambu Studio / OrcaSlicer) deaktiviert ist.`,docsLink:`Installationsschritt 4 anzeigen`,docsLinkInternalStorage:`Warum das passiert`,titleInternalStorage:`Einige kürzliche Drucke blieben im internen Speicher des Druckers`,bodyInternalStorage:`Bambu Studio hat die geslicte Datei im internen Speicher des Druckers statt auf der Karte abgelegt, daher gab es für Bambuddy nichts über FTP zu lesen. Bei der H2-Serie, dem P2S und dem X2D macht die Schaltfläche "Drucken" das immer — nur "Senden" bietet eine Auswahl, und auch die steht standardmäßig auf "Cache". Diese Drucke werden weiterhin mit Namen und Zeiten archiviert, nur ohne Vorschaubild und Slicer-Metadaten. Für vollständige Archive den Druck aus Bambuddy starten oder in OrcaSlicer slicen — oder in Bambu Studio "Senden" mit "Extern" verwenden und den Druck danach starten. Alle setzen eine Karte oder einen Stick im Drucker voraus.`,titleNoExternalStorage:`Einige kürzliche Drucke konnten nicht archiviert werden — kein Speicher im Drucker`,bodyNoExternalStorage:`Der Drucker meldet weder Karte noch Stick im Steckplatz, daher hatte die geslicte Datei keinen Ablageort und Bambuddy nichts zu lesen. Legen Sie einen ein, dann wird der nächste Druck vollständig archiviert.`,titleInternalHistory:`Einige kürzliche Drucke wurden aus einer Datei gestartet, die bereits auf dem Drucker lag`,bodyInternalHistory:`Diese Drucke liefen aus der eigenen Bibliothek des Druckers — ein erneuter Druck über sein Display, ein Start aus Handy oder eine früher gesendete und später gedruckte Datei. Bambuddy liest Druckdateien über FTP, und das bedient nur Karte oder Stick, während der Drucker diese Bibliothek in einem Bereich ablegt, den FTP nicht erreicht — es gab also keine 3MF zu lesen. Keine Slicer-Einstellung ändert das, denn für diese Drucke wurde nichts gesendet. Sie werden weiterhin mit Namen und Zeiten archiviert, und unter "Archiv bearbeiten" lässt sich das verbrauchte Filament von Hand eintragen. Für ein vollständiges Archiv starten Sie den Druck stattdessen aus Bambuddy oder aus Ihrem Slicer.`,titleFtpsCooloff:`Einige kürzliche Drucke konnten nicht archiviert werden — der Drucker hat die Dateiverbindung abgewiesen`,bodyFtpsCooloff:`Bambuddy hat den Dateiübertragungs-Port des Druckers (FTPS 990) geöffnet, und der Drucker hat mit etwas geantwortet, das kein TLS ist. Deshalb ließ sich nichts von ihm lesen. Diese Drucke sind weiterhin mit Namen und Zeiten archiviert, nur ohne Vorschaubild und Slicer-Metadaten. Das ist keine Slicer-Einstellung und nichts, was Sie geändert haben — dieselben Modelle und Firmware-Stände laufen auf anderen Installationen normal, und ein betroffener Drucker arbeitet später meist von selbst wieder. Nach einem solchen Fehler pausiert Bambuddy die Übertragungen zu diesem Drucker fünf Minuten lang und holt die Datei nach Ablauf der Pause erneut; eine kurze Episode behebt sich damit von selbst, eine weiterhin leere Karte bedeutet, dass die Abweisung länger anhielt als der zweite Versuch. Was das auslöst, ist noch nicht bekannt. Wenn es wiederholt auftritt, aktivieren Sie auf der Seite System die Debug-Protokollierung und hängen Sie ein Support-Paket an Ihre Meldung an.`,titleFtpTransferFailed:`Einige aktuelle Drucke konnten nicht archiviert werden — die Dateiübertragung hat zu lange gedauert`,bodyFtpTransferFailed:`Die geslicete Datei lag auf der Karte des Druckers und der Drucker hat sie auch ausgeliefert, aber die Übertragung wurde nicht in der erlaubten Zeit fertig. Zum Druckstart bedient der Drucker gleichzeitig seine Kamera, seine Statusmeldungen und den Auftrags-Upload, und eine große 3MF kommt dagegen nicht immer durch. Diese Drucke sind weiterhin mit Name und Zeiten archiviert, nur ohne Vorschaubild und Slicer-Daten. Das ist keine Slicer-Einstellung und nichts, was Sie geändert haben. Bambuddy holt die Datei in den folgenden zehn Minuten noch dreimal nach, die meisten Fälle erledigen sich also von selbst; eine weiterhin leere Karte bedeutet, dass auch jeder dieser Versuche zu lange gedauert hat. Wenn es häufiger vorkommt, erhöhen Sie Verbindungs-Timeout unter Einstellungen > Netzwerk > FTP-Wiederholung.`,dismissLabel:`Hinweis schließen`},searchPlaceholder:`Archiv durchsuchen...`,filterByPrinter:`Nach Drucker filtern`,filterByStatus:`Nach Status filtern`,sortBy:`Sortieren nach`,sortNewest:`Neueste zuerst`,sortOldest:`Älteste zuerst`,sortName:`Name`,sortDuration:`Dauer`,sortLargest:`Größte zuerst`,sortSmallest:`Kleinste zuerst`,sortSize:`Größe`,noArchives:`Keine Archive gefunden`,noArchivesSearch:`Keine Archive entsprechen Ihrer Suche`,originalPrintNotVisible:`Ursprünglicher Druck nicht sichtbar - versuchen Sie, die Filter zu löschen`,noArchivesYet:`Noch keine Archive`,prints:`Drucke`,pagination:{showing:`Zeige`,to:`bis`,of:`von`,show:`Zeige`,page:`Seite`,all:`Alle`},loadingArchives:`Lade Archive...`,releaseToUpload:`Loslassen zum Hochladen`,showAll:`Alle anzeigen`,showFavoritesOnly:`Nur Favoriten anzeigen`,gridView:`Rasteransicht`,listView:`Listenansicht`,calendarView:`Kalenderansicht`,logView:`Druckprotokoll`,manageTags:`Tags verwalten`,showFailedPrints:`Fehlgeschlagene Drucke anzeigen`,hideFailedPrints:`Fehlgeschlagene Drucke ausblenden`,hideDuplicates:`Duplikate ausblenden`,viewOriginalPrint:`Klicken, um den ursprünglichen Druck anzuzeigen (#{{id}})`,printTime:`Druckzeit`,filamentUsed:`Verbrauchtes Filament`,cost:`Kosten`,preview:`Vorschau`,deleteArchive:`Archiv löschen`,deleteConfirm:`Möchten Sie dieses Archiv wirklich löschen?`,favorite:`Favorit`,unfavorite:`Aus Favoriten entfernen`,viewDetails:`Details anzeigen`,status:{completed:`Abgeschlossen`,failed:`Fehlgeschlagen`,stopped:`Gestoppt`},toast:{source3mfAttached:`Quell-3MF angehängt: {{filename}}`,failedUploadSource3mf:`Fehler beim Hochladen der Quell-3MF`,source3mfRemoved:`Quell-3MF entfernt`,failedRemoveSource3mf:`Fehler beim Entfernen der Quell-3MF`,f3dAttached:`F3D angehängt: {{filename}}`,failedUploadF3d:`Fehler beim Hochladen der F3D`,f3dRemoved:`F3D entfernt`,failedRemoveF3d:`Fehler beim Entfernen der F3D`,timelapseAttached:`Zeitraffer angehängt: {{filename}}`,timelapseAlreadyAttached:`Zeitraffer bereits angehängt`,noMatchingTimelapse:`Kein passender Zeitraffer gefunden`,failedScanTimelapse:`Fehler beim Suchen nach Zeitraffer`,failedAttachTimelapse:`Fehler beim Anhängen des Zeitraffers`,timelapseRemoved:`Zeitraffer entfernt`,failedRemoveTimelapse:`Fehler beim Entfernen des Zeitraffers`,timelapseUploaded:`Zeitraffer hochgeladen: {{filename}}`,failedUploadTimelapse:`Fehler beim Hochladen des Zeitraffers`,archiveDeleted:`Archiv gelöscht`,failedDeleteArchive:`Fehler beim Löschen des Archivs`,addedToFavorites:`Zu Favoriten hinzugefügt`,removedFromFavorites:`Aus Favoriten entfernt`,projectUpdated:`Projekt aktualisiert`,failedUpdateProject:`Fehler beim Aktualisieren des Projekts`,linkCopied:`Link in die Zwischenablage kopiert`,failedCopyLink:`Fehler beim Kopieren des Links`,photoDeleted:`Foto gelöscht`,failedDeletePhoto:`Fehler beim Löschen des Fotos`,failedDeleteArchives:`Fehler beim Löschen der Archive`,failedUpdateFavorites:`Fehler beim Aktualisieren der Favoriten`,exportDownloaded:`Export heruntergeladen`,exportFailed:`Export fehlgeschlagen`},menu:{print:`Drucken`,openInBambuStudio:`Im Slicer öffnen`,slice:`Slicen`,externalLink:`Externer Link`,viewOnMakerWorld:`Auf MakerWorld ansehen`,preview3d:`3D-Vorschau`,viewTimelapse:`Zeitraffer ansehen`,scanForTimelapse:`Nach Zeitraffer suchen`,uploadTimelapse:`Zeitraffer hochladen`,removeTimelapse:`Zeitraffer entfernen`,downloadSource3mf:`Quell-3MF herunterladen`,uploadSource3mf:`Quell-3MF hochladen`,replaceSource3mf:`Quell-3MF ersetzen`,removeSource3mf:`Quell-3MF entfernen`,uploadF3d:`F3D hochladen`,replaceF3d:`F3D ersetzen`,downloadF3d:`F3D herunterladen`,removeF3d:`F3D entfernen`,download:`Herunterladen`,copyDownloadLink:`Download-Link kopieren`,qrCode:`QR-Code`,viewPhotos:`Fotos ansehen`,viewPhotosCount:`Fotos ansehen ({{count}})`,projectPage:`Projektseite`,addToFavorites:`Zu Favoriten hinzufügen`,removeFromFavorites:`Aus Favoriten entfernen`,edit:`Bearbeiten`,printLog:`Druckprotokoll`,goToProject:`Zum Projekt: {{name}}`,addToProject:`Zu Projekt hinzufügen`,removeFromProject:`Aus Projekt entfernen`,loading:`Laden...`,noProjectsAvailable:`Keine Projekte verfügbar`,searchProjects:`Projekte suchen…`,select:`Auswählen`,deselect:`Abwählen`,delete:`Löschen`},permission:{noReprint:`Sie haben keine Berechtigung, dieses Archiv erneut zu drucken`,noAddToQueue:`Sie haben keine Berechtigung, zur Warteschlange hinzuzufügen`,noUpdateArchives:`Sie haben keine Berechtigung, Archive zu aktualisieren`,noUploadFiles:`Sie haben keine Berechtigung, Dateien hochzuladen`,noDownload:`Sie haben keine Berechtigung, Archive herunterzuladen`,noCopyLink:`Sie haben keine Berechtigung, Download-Links zu kopieren`,noDelete:`Sie haben keine Berechtigung, dieses Archiv zu löschen`,noEdit:`Sie haben keine Berechtigung, diesen Eintrag zu bearbeiten`,noCreate:`Sie haben keine Berechtigung, Archive zu erstellen`},platePicker:{title:`Platte zur Vorschau auswählen`,hint:`Dieses Archiv enthält mehrere Platten. Wähle eine, um sie im GCode-Viewer zu öffnen.`,plateLabel:`Platte {{index}}`,objectCount:`{{count}} Objekt`,objectCount_plural:`{{count}} Objekte`,noGcode:`Dieses Archiv enthält keinen geschnittenen G-Code zur Vorschau. Öffne es zuerst in Bambu Studio zum Slicen.`},card:{previousPlate:`Vorherige Platte`,nextPlate:`Nächste Platte`,plateNumber:`Platte {{index}}`,moreOptions:`Rechtsklick für mehr Optionen`,addToFavorites:`Zu Favoriten hinzufügen`,removeFromFavorites:`Aus Favoriten entfernen`,cancelled:`abgebrochen`,failed:`fehlgeschlagen`,duplicate:`Duplikat`,duplicateTitle:`Dieses Modell wurde bereits zuvor gedruckt`,openSource3mf:`Quell-3MF in Bambu Studio öffnen (Rechtsklick für mehr Optionen)`,downloadF3d:`Fusion 360 Designdatei herunterladen`,viewTimelapse:`Zeitraffer ansehen`,viewPhoto:`1 Foto ansehen`,viewPhotos:`{{count}} Fotos ansehen`,openFolder:`Ordner öffnen: {{name}}`,slicedFile:`Geslicte Datei - druckbereit`,sourceFile:`Nur Quelldatei - keine AMS-Zuordnung verfügbar`,gcode:`GCODE`,source:`QUELLE`,project:`Projekt: {{name}}`,runsBadge:`{{count}} Drucke`,runsBadgeTitle:`Insgesamt {{count}} Drucke — {{successful}} erfolgreich, {{failed}} fehlgeschlagen. Klicken, um das vollständige Druckprotokoll zu öffnen.`,estimated:`Geschätzt: {{time}}`,actual:`Tatsächlich: {{time}}`,accuracy:`Genauigkeit: {{percent}}%`,filament:`{{weight}} g`,layer:`{{count}} Schicht`,layers:`{{count}} Schichten`,object:`{{count}} Objekt`,objects:`{{count}} Objekte`,slicedFor:`Geslict für {{model}}`,uploadedBy:`Hochgeladen von`,noPermissionReprint:`Sie haben keine Berechtigung, erneut zu drucken`,noFileForReprint:`Keine 3MF-Datei verfügbar — die Datei konnte beim Aufzeichnen des Drucks nicht vom Drucker heruntergeladen werden`,slicerAmsMapping:`AMS-Zuordnung gespeichert ({{printer}})`,slicerAmsMappingTooltip:`Die AMS-Steckplatzwahl des Slicers wurde für {{printer}} gespeichert. Steckplatznummern gelten nur für diesen Drucker, daher wird sie bei einem erneuten Druck nur wiederverwendet, wenn er wieder an {{printer}} geht.`,noPermissionEdit:`Sie haben keine Berechtigung, Archive zu bearbeiten`,noPermissionDelete:`Sie haben keine Berechtigung, Archive zu löschen`,openInBambuStudio:`Im Slicer öffnen`,openInBambuStudioToSlice:`Im Slicer öffnen zum Slicen`,slice:`Slicen`,externalLink:`Externer Link`,makerWorld:`MakerWorld – {{designer}}`,viewProject:`Projekt ansehen`,noExternalLink:`Kein externer Link`,preview3d:`3D-Vorschau`,download:`Herunterladen`,edit:`Bearbeiten`,delete:`Löschen`},runLog:{title:`Druckprotokoll`,modalTitle:`Druckprotokoll — {{name}}`,modalTitleFallback:`dieses Archiv`,empty:`Für dieses Archiv wurden noch keine Druckereignisse aufgezeichnet.`,col:{date:`Datum`,status:`Status`,duration:`Dauer`,filament:`Filament`,cost:`Kosten`},status:{completed:`Abgeschlossen`,failed:`Fehlgeschlagen`,cancelled:`Abgebrochen`,stopped:`Gestoppt`,skipped:`Übersprungen`,printing:`Druckt`}},modal:{deleteArchive:`Archiv löschen`,deleteConfirm:`Möchten Sie "{{name}}" wirklich löschen? Diese Aktion kann nicht rückgängig gemacht werden.`,deleteButton:`Löschen`,deletePurgeStats:`Diesen Druck auch aus den Quick Stats entfernen (Filament, Zeit, Kosten, Energie)`,deleteQueueItemsWarning:`{{count}} mit diesem Archiv verknüpfte Warteschlangeneinträge werden ebenfalls entfernt.`,deleteBlockedByPrinting:`Löschen nicht möglich — {{count}} Warteschlangeneinträge werden derzeit gedruckt. Druck zuerst stoppen und erneut versuchen.`,removeSource3mf:`Quell-3MF entfernen`,removeSource3mfConfirm:`Möchten Sie die Quell-3MF-Datei wirklich von "{{name}}" entfernen? Die ursprüngliche Slicer-Projektdatei wird gelöscht.`,removeButton:`Entfernen`,removeF3d:`F3D entfernen`,removeF3dConfirm:`Möchten Sie die Fusion 360 Designdatei wirklich von "{{name}}" entfernen?`,removeTimelapse:`Zeitraffer entfernen`,removeTimelapseConfirm:`Möchten Sie das Zeitraffervideo wirklich von "{{name}}" entfernen?`,timelapse:`{{name}} - Zeitraffer`,selectTimelapse:`Zeitraffer auswählen`,selectTimelapseDesc:`Keine automatische Übereinstimmung gefunden. Wählen Sie den Zeitraffer für diesen Druck:`,deleteArchives:`Archive löschen`,deleteArchivesConfirm:`Möchten Sie wirklich {{count}} Archiv(e) löschen? Diese Aktion kann nicht rückgängig gemacht werden.`,deleteCount:`{{count}} löschen`},page:{title:`Archive`,printsCount:`{{filtered}} von {{total}} Drucken`,dropFilesHere:`.3mf-Dateien hier ablegen`,releaseToUpload:`Loslassen zum Hochladen`,only3mfSupported:`Nur .3mf-Dateien werden unterstützt`,close:`Schließen`,selected:`{{count}} ausgewählt`,selectAll:`Alle auswählen`,tags:`Tags`,project:`Projekt`,favorite:`Favorit`,delete:`Löschen`,toggledFavorites:`Favoriten für {{count}} Archiv(e) umgeschaltet`,failedUpdateFavorites:`Fehler beim Aktualisieren der Favoriten`,archivesDeleted:`{{count}} Archiv(e) gelöscht`,failedDeleteArchives:`Fehler beim Löschen der Archive`,photoDeleted:`Foto gelöscht`,failedDeletePhoto:`Fehler beim Löschen des Fotos`},list:{name:`Name`,printer:`Drucker`,date:`Datum`,size:`Größe`,actions:`Aktionen`,hasTimelapse:`Hat Zeitraffer`},log:{date:`Datum`,printName:`Druckname`,printer:`Drucker`,user:`Benutzer`,status:`Status`,duration:`Dauer`,filament:`Filament`,filamentUsed:`Filamentverbrauch`,cost:`Kosten`,energy:`Energie`,energyCost:`Energiekosten`,completedAt:`Beendet`,columns:`Spalten`,sortBy:`Nach {{column}} sortieren`,allPrinters:`Alle Drucker`,allUsers:`Alle Benutzer`,allStatuses:`Alle Status`,cancelled:`Abgebrochen`,skipped:`Übersprungen`,dateFrom:`Von`,dateTo:`Bis`,noEntries:`Keine Druckprotokolleinträge gefunden`,showing:`{{count}} von {{total}} Einträgen`,rowsPerPage:`Zeilen`,page:`Seite`,prev:`Zurück`,next:`Weiter`,clearLog:`Protokoll löschen`,clearLogTitle:`Druckprotokoll löschen`,clearLogConfirm:`Alle Druckprotokolleinträge werden dauerhaft gelöscht. Archive und Warteschlangeneinträge sind nicht betroffen. Diese Aktion kann nicht rückgängig gemacht werden. Sind Sie sicher?`,clearLogButton:`Alle löschen`,cleared:`{{count}} Protokolleinträge gelöscht`,clearFailed:`Druckprotokoll konnte nicht gelöscht werden`,deleteEntryTitle:`Druckprotokoll-Eintrag löschen`,deleteEntryConfirm:`Dieser Eintrag wird aus dem Protokoll entfernt und sein Filament-, Zeit- und Kostenbeitrag verschwindet aus den Schnellstatistiken. Das zugehörige Archiv (falls vorhanden) ist nicht betroffen. Diese Aktion kann nicht rückgängig gemacht werden.`,entryDeleted:`Druckprotokoll-Eintrag gelöscht`,entryDeleteFailed:`Druckprotokoll-Eintrag konnte nicht gelöscht werden`,editEntryTitle:`Druckprotokoll-Eintrag bearbeiten`,editEntryDescription:`Diesen Druckdurchlauf klassifizieren. Das Fehleranalyse-Widget gruppiert nach diesen Werten, sodass Aktualisierungen sofort in die Statistik einfließen.`,entryUpdated:`Druckprotokoll-Eintrag aktualisiert`,entryUpdateFailed:`Druckprotokoll-Eintrag konnte nicht aktualisiert werden`,statuses:{completed:`Abgeschlossen`,failed:`Fehlgeschlagen`,stopped:`Gestoppt`,cancelled:`Abgebrochen`,skipped:`Übersprungen`}}},dispatchToast:{untitled:`Druckjob`,startingPrints:`Drucke starten`,progressSummary:`{{complete}}/{{total}} fertig • Verarbeitung: {{processing}}`,expandDetails:`Versanddetails ausklappen`,collapseDetails:`Versanddetails einklappen`,awaitingPrinter:`Warte auf Drucker…`,status:{processing:`Verarbeitung`,completed:`Fertig`,failed:`Fehlgeschlagen`},failed:{generic:`Versand fehlgeschlagen`,upload_failed:`Upload zum Drucker fehlgeschlagen`,start_command_failed:`Drucker hat Startbefehl abgelehnt`},dismiss:`Schließen`},pipelineRuns:{title:`Pipeline-Läufe`,loading:`Wird geladen…`,empty:`Noch keine Pipeline-Läufe.`,filter:{pipeline:`Pipeline`,status:`Status`,target:`Ziel`,all:`Alle`,allPipelines:`Alle Pipelines`,allStatus:`Alle Status`,allTargets:`Alle Ziele`,clear:`Filter zurücksetzen`,noMatches:`Keine Läufe entsprechen den aktuellen Filtern.`},totalCount_one:`{{n}} Lauf`,totalCount_other:`{{n}} Läufe`,copies:`{{n}} Kopien`,failedCount:`{{n}} fehlgeschlagen`,copyN:`Kopie {{n}}`,retryFailed:`Fehlgeschlagene wiederholen`,retryOf:`Wiederholung von #{{n}}`,pagination:`{{start}}–{{end}} von {{total}}`,toast:{cancelled:`Lauf abgebrochen`,cancelFailed:`Abbruch fehlgeschlagen`,retryStarted:`Wiederholung gestartet`,retryFailed:`Wiederholung fehlgeschlagen`,cleared:`{{n}} Läufe gelöscht`,clearFailed:`Löschen fehlgeschlagen`},clearLog:`Verlauf löschen`,clearConfirmTitle:`Verlauf löschen?`,clearConfirmBody:`Jeden abgeschlossenen, fehlgeschlagenen, abgebrochenen und teilweise fehlgeschlagenen Pipeline-Lauf löschen? Laufende Läufe bleiben erhalten. Dies kann nicht rückgängig gemacht werden.`,clearConfirmAction:`Löschen`,jobStatus:{pending:`ausstehend`,awaiting_printer:`wartet auf Drucker`,queued:`in Warteschlange`,printing:`druckt`,completed:`abgeschlossen`,failed:`fehlgeschlagen`,cancelled:`abgebrochen`},cancelledByUser:`Vom Benutzer abgebrochen`},queue:{filamentShort:{rowBadge:`Filament fuer die zugewiesene Spule reicht nicht`,rowTooltip:`Der Dispatcher hat diese Position markiert. Klicke auf Play, um den Pro-Slot-Fehlbestand zu sehen und zu entscheiden, ob trotzdem gedruckt werden soll.`,confirmTitle:`Filament reicht nicht`,confirmIntro:`Die zugewiesene Spule kann mindestens einen Slot nicht versorgen. Trotzdem drucken?`,lineItem:`Slot {{slot}}: benoetigt {{required}} g, {{remaining}} g verbleibend`,unknown:`unbekannt`,printAnyway:`Trotzdem drucken`},slicerAmsMapping:{rowBadge:`AMS-Steckplätze für diesen Drucker gespeichert`,rowTooltip:`Dieses Archiv enthält die genauen AMS-Steckplätze, die der Slicer ausgewählt hat, gespeichert für den Drucker dieses Eintrags. Ein erneuter Druck darauf kann diese Fächer wiederverwenden, statt erneut nach Typ und Farbe zuzuordnen.`},title:`Druckwarteschlange`,subtitle:`Planen und verwalten Sie Ihre Druckaufträge`,editQueueItem:`Warteschlangeneintrag bearbeiten`,selectAllPlates:`Alle {{count}} Platten auswählen`,deselectAll:`Alle abwählen`,printQueued:`Druck in Warteschlange`,printQueuedWillStartWhenIdle:`Startet, sobald der Drucker im Leerlauf ist`,itemsQueued:`{{count}} Einträge in Warteschlange`,sending:`Wird gesendet...`,sendingProgress:`Sende {{current}}/{{total}}...`,adding:`Wird hinzugefügt...`,addingProgress:`Füge hinzu {{current}}/{{total}}...`,savingProgress:`Speichere {{current}}/{{total}}...`,clearQueue:`Warteschlange leeren`,clearHistory:`Verlauf löschen`,emptyQueue:`Warteschlange ist leer`,position:`Position`,scheduledTime:`Geplante Zeit`,moveUp:`Nach oben`,moveDown:`Nach unten`,startNow:`Jetzt starten`,printingInProgress:`Druck läuft...`,viewArchive:`Archiv anzeigen`,viewInFileManager:`Im Dateimanager anzeigen`,itemCount:`{{count}} Element`,itemCount_plural:`{{count}} Elemente`,dragToReorder:`Ziehen zum Neuordnen (nur Sofort)`,reorderHint:`Position betrifft nur Sofort-Elemente. Geplante Elemente werden zur festgelegten Zeit ausgeführt.`,sjf:{label:`SJF`,tooltip:`Kürzester Auftrag zuerst — Scheduler bevorzugt kürzere Drucke`},addedBy:`Hinzugefügt von {{name}}`,nextInQueue:`Nächster in der Warteschlange`,clearPlateSuccess:`Druckplatte freigegeben — bereit für nächsten Druck`,plateNumber:`Platte {{index}}`,quantity:`Menge`,quantityHint:`Erstellt {{count}} Warteschlangeneinträge`,plateQuantityLabel:`Durchläufe von {{plate}}`,plateQuantityTotal_one:`{{count}} Durchlauf insgesamt`,plateQuantityTotal_other:`{{count}} Durchläufe insgesamt`,batchOrders:{title:`Stapelaufträge`,emptyTitle:`Keine Stapelaufträge`,emptyDescription:`Stelle eine Datei mit mehreren Druckplatten oder mehrere Kopien einer Platte in die Warteschlange — der Auftrag erscheint hier mit seinem Fortschritt.`,filter:{active:`Aktiv`,completed:`Abgeschlossen`,cancelled:`Abgebrochen`,all:`Alle`},status:{active:`Aktiv`,completed:`Abgeschlossen`,cancelled:`Abgebrochen`},noTargets:`Nur Gruppierung`,noTargetsHint:`Vor der Einführung von Zielmengen pro Platte erstellt; verfolgt daher die eingereihten Durchläufe statt einer Zielmenge.`,dispatchRemaining:`{{count}} verbleibende einreihen`,dispatchPlate:`Rest einreihen`,strandedPlate:`Keine Vorlage mehr zum Kopieren`,strandedNotice:`Von den {{owed}} noch offenen Durchläufen lassen sich {{runs}} nicht einreihen: Für diese Platte gibt es keinen eingereihten oder abgeschlossenen Durchlauf mehr, von dem sich die Einstellungen kopieren lassen. Reihe die Platte einmal aus der Datei ein oder brich den Auftrag ab.`,dispatched:`Verbleibende Durchläufe für {{name}} eingereiht`,plateProgress:`{{completed}} von {{target}} fertig`,remaining:`{{count}} noch offen`,failed:`{{count}} fehlgeschlagen`,printing:`{{count}} im Druck`,wholeFile:`Gesamte Datei`,due:`Fällig {{date}}`,costSoFar:`{{amount}} bisher`,costRemaining:`({{amount}} verbleibend)`},activeBatches:`Aktive Stapel`,batchProgress:`{{completed}} von {{total}} abgeschlossen`,cancelBatch:`Verbleibende abbrechen`,batchCancelled:`Verbleibende Stapeleinträge abgebrochen`,cancelBatchConfirmTitle:`Stapel abbrechen`,cancelBatchConfirmMessage:`Diesen Auftrag schließen? Noch eingereihte Durchläufe werden abgebrochen, und er fordert nicht länger, was er nicht produziert hat.`,batch:{defaultName:`Stapel`,label:`{{count}} Eintrag`,label_plural:`{{count}} Einträge`,pendingCount:`{{count}} ausstehend`,pendingCount_plural:`{{count}} ausstehend`,expand:`Stapel ausklappen`,collapse:`Stapel einklappen`,groupAsBatch:`Als Stapel gruppieren…`,groupAsBatchDescription:`Fasse die {{count}} ausgewählten Einträge zu einem einklappbaren Stapel zusammen.`,nameLabel:`Stapelname`,namePlaceholder:`z. B. Freitagsgeschenke`,create:`Stapel erstellen`,ungroup:`Gruppierung aufheben`,ungroupConfirmTitle:`Stapel auflösen?`,ungroupConfirmMessage:`Die Einträge bleiben in der Warteschlange, sind aber nicht mehr gruppiert.`,dragGroup:`Gruppe ziehen`},tabs:{batches:`Stapel`,queue:`Warteschlange`,history:`Verlauf`,timeline:`Zeitachse`,pipelines:`Druckabläufe`},layout:{flatList:`Liste`,byPrinter:`Nach Drucker`,groupByPrinter:`Nach Drucker gruppieren`},history:{emptyTitle:`Noch kein Verlauf`,emptyDescription:`Abgeschlossene, abgebrochene und fehlgeschlagene Drucke erscheinen hier.`,showMore:`Mehr anzeigen`,showingCount:`{{shown}} von {{total}} werden angezeigt`},dragGhost:{multiCount:`{{count}} Einträge`,batch:`{{name}} ({{count}} Kopie)`,batch_plural:`{{name}} ({{count}} Kopien)`},sections:{currentlyPrinting:`Aktuell druckend`,queued:`In Warteschlange`,history:`Verlauf`},status:{pending:`Ausstehend`,waiting:`Wartend`,printing:`Druckt`,paused:`Pausiert`,completed:`Abgeschlossen`,failed:`Fehlgeschlagen`,skipped:`Übersprungen`,cancelled:`Abgebrochen`},summary:{printing:`Druckt`,queued:`In Warteschlange`,totalTime:`Gesamte Wartezeit`,totalWeight:`Gesamtgewicht der Warteschlange`,history:`Verlauf`},filter:{allPrinters:`Alle Drucker`,unassigned:`Nicht zugewiesen`,allStatus:`Alle Status`,allLocations:`Alle Standorte`,any:`Beliebig`},sort:{byPosition:`Nach Position sortieren`,byName:`Nach Name sortieren`,byPrinter:`Nach Drucker sortieren`,bySchedule:`Nach Zeitplan sortieren`,byDate:`Nach Datum sortieren`,ascendingOldest:`Aufsteigend (älteste zuerst)`,descendingNewest:`Absteigend (neueste zuerst)`},badges:{staged:`Bereitgestellt`,requiresPrevious:`Erfordert vorherigen Erfolg`,autoPowerOff:`Automatisch ausschalten`,gcodeInjection:`G-Code`},empty:{title:`Keine Drucke geplant`,description:`Planen Sie einen Druck von der Archivseite über die Option "Planen" im Kontextmenü oder ziehen Sie Dateien hierher.`},time:{etaIfStartedNow:`Fertigstellungszeit, wenn dieser Auftrag jetzt starten würde`,whenFree:`Sobald ein Drucker frei ist`,overdue:`Überfällig`,now:`Jetzt`,lessThanMinute:`In weniger als einer Minute`,inMinutes:`In {{count}} Min`,inHours:`In {{count}} Stunden`},actions:{startPrint:`Druck starten`,stopPrint:`Druck stoppen`,requeue:`Erneut einreihen`},bulkEdit:{title:`{{count}} Element bearbeiten`,title_plural:`{{count}} Elemente bearbeiten`,description:`Nur geänderte Einstellungen werden auf ausgewählte Elemente angewendet.`,printer:`Drucker`,noChange:`— Keine Änderung —`,queueOptions:`Warteschlangenoptionen`,staged:`Bereitgestellt (manueller Start)`,autoPowerOff:`Nach Druck automatisch ausschalten`,requirePrevious:`Vorherigen Erfolg erfordern`,gcodeInjection:`G-Code einfügen`,printOptions:`Druckoptionen`,bedLevelling:`Bett-Nivellierung`,flowCalibration:`Fluss-Kalibrierung`,vibrationCalibration:`Vibrations-Kalibrierung`,layerInspection:`Erste-Schicht-Prüfung`,timelapse:`Zeitraffer`,useAms:`AMS verwenden`,nozzleOffsetCali:`Düsenversatz-Kalibrierung`,applyChanges:`Änderungen übernehmen`,selectAll:`Alle auswählen`,deselectAll:`Auswahl aufheben`,selected:`{{count}} ausgewählt`,editSelected:`Ausgewählte bearbeiten`,cancelSelected:`Ausgewählte abbrechen`},confirm:{cancelTitle:`Geplanten Druck abbrechen`,cancelMessage:`Möchten Sie "{{name}}" wirklich abbrechen?`,stopTitle:`Druck stoppen`,stopMessage:`Möchten Sie den aktuellen Druck "{{name}}" wirklich stoppen? Der Druckauftrag wird am Drucker abgebrochen.`,removeTitle:`Aus Verlauf entfernen`,removeMessage:`Möchten Sie "{{name}}" wirklich aus dem Warteschlangenverlauf entfernen?`,clearHistoryTitle:`Verlauf löschen`,clearHistoryMessage:`Möchten Sie alle {{count}} Element(e) aus dem Verlauf entfernen?`,cancelButton:`Druck abbrechen`,stopButton:`Druck stoppen`,thisPrint:`diesen Druck`,thisItem:`dieses Element`},toast:{cancelled:`Warteschlangenelement abgebrochen`,cancelFailed:`Element konnte nicht abgebrochen werden`,removed:`Warteschlangenelement entfernt`,keptForOrder:`Abgebrochen statt entfernt: Nur aus diesem Durchlauf kann der Stapelauftrag diese Platte erneut einreihen`,historyKeptForOrders:`{{kept}} behalten, die Stapelaufträge noch brauchen.`,removeFailed:`Element konnte nicht entfernt werden`,stopped:`Druck gestoppt`,stopFailed:`Druck konnte nicht gestoppt werden`,released:`Druck in Warteschlange freigegeben`,startFailed:`Druck konnte nicht gestartet werden`,reorderFailed:`Warteschlange konnte nicht neu geordnet werden`,historyCleared:`{{count}} Verlaufselement(e) gelöscht`,clearHistoryFailed:`Verlauf konnte nicht gelöscht werden`,updateFailed:`Elemente konnten nicht aktualisiert werden`,bulkCancelled:`{{count}} Element(e) abgebrochen`,bulkCancelFailed:`Elemente konnten nicht abgebrochen werden`,batchCreated:`Stapel „{{name}}“ erstellt`,batchCreateFailed:`Stapel konnte nicht erstellt werden`,batchUngrouped:`{{count}} Eintrag/Einträge aus Stapel gelöst`,batchUngroupFailed:`Stapel konnte nicht aufgelöst werden`,resumedAfterFailure:`Warteschlange fortgesetzt — {{restored}} Auftrag/Aufträge wieder eingereiht`,resumeAfterFailureFailed:`Warteschlange konnte nicht fortgesetzt werden`},resumeAfterFailure:{banner:`{{printer}} ist durch einen vorherigen Druckfehler blockiert — {{count}} Auftrag/Aufträge übersprungen`,bannerHint:`Behebe das Druckerproblem und setze die Warteschlange dann fort, um die übersprungenen Aufträge wiederherzustellen und die Sperre aufzuheben.`,button:`Nach Fehler fortsetzen`,confirmTitle:`Warteschlange nach Fehler fortsetzen?`,confirmMessage:`Setze {{count}} übersprungenen Auftrag/Aufträge auf {{printer}} wieder auf „Ausstehend“ und hebe die Vorgängersperre auf. Stelle vorher sicher, dass der Drucker bereit ist.`},timeline:{listView:`Liste`,timelineView:`Zeitstrahl`,unassigned:`Nicht zugewiesen`,noData:`Keine geplanten Drucke für diesen Tag`,nothingCommitted:`Keine festgelegten Pläne in diesem Zeitfenster. Vorgemerkte Einträge, wartende Einträge und ASAP-Aufträge auf inaktiven Druckern werden nicht angezeigt — leg eine geplante Zeit fest oder gib einen vorgemerkten Eintrag frei, damit er hier erscheint.`,allDoneBy:`Alle Drucke voraussichtlich fertig um {{time}}`,staged:`Bereitgestellt`,filterAll:`Alle anzeigen`,filterPrinting:`Druckend`,filterQueued:`Warteschlange`,time:{anyMoment:`jeden Moment`,minutesLeft:`{{minutes}}m übrig`,hoursLeft:`{{hours}}h übrig`,hoursMinutesLeft:`{{hours}}h {{minutes}}m übrig`},day:{previous:`Vorheriger Tag`,next:`Nächster Tag`,today:`Heute`},window:{back12h:`12 Stunden zurück`,forward12h:`12 Stunden vor`,now:`Jetzt`},printerColumnHeader:`Drucker`},permissions:{noStopPrint:`Sie haben keine Berechtigung, Drucke zu stoppen`,noStartPrint:`Sie haben keine Berechtigung, Drucke zu starten`,noEdit:`Sie haben keine Berechtigung, dieses Warteschlangenelement zu bearbeiten`,noCancel:`Sie haben keine Berechtigung, dieses Warteschlangenelement abzubrechen`,noRequeue:`Sie haben keine Berechtigung, Elemente erneut einzureihen`,noRemove:`Sie haben keine Berechtigung, dieses Warteschlangenelement zu entfernen`,noClearHistory:`Sie haben keine Berechtigung, den gesamten Verlauf zu löschen`,noEditItems:`Sie haben keine Berechtigung, Warteschlangenelemente zu bearbeiten`,noCancelItems:`Sie haben keine Berechtigung, Warteschlangenelemente abzubrechen`}},stats:{title:`Statistiken`,subtitle:`Widgets zum Neuanordnen ziehen. Auf das Augensymbol klicken zum Ausblenden.`,overview:`Übersicht`,totalPrints:`Gesamtdrucke`,successRate:`Erfolgsrate`,totalPrintTime:`Gesamtdruckzeit`,printTime:`Druckzeit`,totalFilament:`Gesamtverbrauch Filament`,filamentUsed:`Filamentverbrauch`,filamentCost:`Filamentkosten`,totalCost:`Gesamtkosten`,energyUsed:`Energieverbrauch`,energyCost:`Energiekosten`,energyWarmingUpTooltip:`Die Energieerfassung sammelt noch stündliche Snapshots. Zeitraumwerte werden genau, sobald vor dem gewählten Bereich mindestens ein Snapshot vorliegt. Frühe Werte können zu niedrig sein.`,averagePrintTime:`Durchschnittliche Druckzeit`,printsPerDay:`Drucke pro Tag`,byPrinter:`Nach Drucker`,printsByPrinter:`Drucke nach Drucker`,byMaterial:`Nach Material`,byMonth:`Nach Monat`,last7Days:`Letzte 7 Tage`,last30Days:`Letzte 30 Tage`,last90Days:`Letzte 90 Tage`,allTime:`Gesamt`,quickStats:`Schnellstatistiken`,printActivity:`Druckaktivität`,filamentTypes:`Filamenttypen`,filamentTrends:`Filamenttrends`,failureAnalysis:`Fehleranalyse`,timeAccuracy:`Zeitgenauigkeit`,successful:`Erfolgreich:`,failed:`Fehlgeschlagen:`,cancelled:`Abgebrochen:`,perfectEstimate:`100% = perfekte Schätzung`,noTimeAccuracyData:`Noch keine Zeitgenauigkeitsdaten`,noFilamentData:`Keine Filamentdaten verfügbar`,noPrinterData:`Keine Druckerdaten verfügbar`,noPrintData:`Keine Druckdaten verfügbar`,noPrintDataLast30Days:`Keine Druckdaten in den letzten 30 Tagen`,failureReasons:`Fehlerursachen`,topFailureReasons:`Häufigste Fehlerursachen`,failedPrintsCount:`{{failed}} / {{total}} Drucke fehlgeschlagen`,lastWeekRate:`Letzte Woche: {{rate}}%`,resetLayout:`Layout zurücksetzen`,recalculateCosts:`Kosten neu berechnen`,recalculateCostsHint:`Alle Archivkosten mit aktuellen Filamentpreisen neu berechnen`,exportStats:`Statistiken exportieren`,exportAsCsv:`Als CSV exportieren`,exportAsExcel:`Als Excel exportieren`,hiddenCount:`{{count}} ausgeblendet`,exportDownloaded:`Export heruntergeladen`,exportFailed:`Export fehlgeschlagen`,layoutReset:`Layout zurückgesetzt`,recalculatedCosts:`Kosten für {{count}} Archive neu berechnet`,recalculateFailed:`Kosten konnten nicht neu berechnet werden`,loadingStats:`Statistiken werden geladen...`,noPermissionResetLayout:`Sie haben keine Berechtigung, das Layout zurückzusetzen`,noPermissionRecalculate:`Sie haben keine Berechtigung, Kosten neu zu berechnen`,noPrintDataInRange:`Keine Druckdaten im ausgewählten Zeitraum`,periodFilament:`Filamentverbrauch`,periodCost:`Kosten`,avgPerPrint:`Durchschnitt pro Druck`,usageOverTime:`Verbrauch im Zeitverlauf`,energyOverTime:`Energie im Zeitverlauf`,filamentByWeight:`Gewicht`,printDuration:`Druckdauer`,printerUtilization:`Druckerauslastung`,filamentSuccess:`Erfolg nach Material`,printHabits:`Druckgewohnheiten`,printTimeOfDay:`Druck-Tageszeit`,colorDistribution:`Farbverteilung`,noColorData:`Keine Farbdaten verfügbar`,records:`Rekorde`,longestPrint:`Längster Druck`,heaviestPrint:`Schwerster Druck`,mostExpensivePrint:`Teuerster Druck`,busiestDay:`Aktivster Tag`,successStreak:`Erfolgsserie`,streakPrint:`aufeinanderfolgender Druck`,streakPrints:`{{count}} aufeinanderfolgende Drucke`,printerStats:`Druckerstatistiken`,hours:`Stunden`,avgPrints:`Ø Drucke`,noArchiveData:`Keine Druckdaten verfügbar`,filamentByTime:`Zeitverlauf`,avgWeight:`Ø Gewicht`,avgTime:`Ø Zeit`,filamentByPrints:`Drucke`,timeframe:{today:`Heute`,"this-week":`Diese Woche`,"this-month":`Dieser Monat`,"last-7":`Letzte 7 Tage`,"last-30":`Letzte 30 Tage`,"last-90":`Letzte 90 Tage`,"this-year":`Dieses Jahr`,"all-time":`Gesamt`,custom:`Benutzerdefiniert`,from:`Von`,to:`Bis`},allUsers:`Alle Benutzer`,noUser:`Kein Benutzer (System)`,filterByUser:`Nach Benutzer filtern`},maintenance:{title:`Wartung`,overview:`Übersicht`,allOk:`Alle Wartungen aktuell`,dueCount:`{{count}} Aufgabe fällig`,dueCount_plural:`{{count}} Aufgaben fällig`,warningCount:`{{count}} Warnung`,warningCount_plural:`{{count}} Warnungen`,totalPrintTime:`Gesamtdruckzeit`,nextMaintenance:`Nächste Wartung`,nothingDue:`Nichts fällig`,tasks:`Aufgaben`,lastPerformed:`Zuletzt durchgeführt`,interval:`Intervall`,hoursRemaining:`{{hours}}h verbleibend`,hoursOverdue:`{{hours}}h überfällig`,markDone:`Als erledigt markieren`,performMaintenance:`Wartung durchführen`,history:`Verlauf`,noHistory:`Kein Wartungsverlauf`,editPrintHours:`Druckstunden bearbeiten`,currentHours:`Aktuelle Stunden`,statusTab:`Status`,settingsTab:`Einstellungen`,overdueCount:`{{count}} überfällig`,dueSoonCount:`{{count}} bald fällig`,dueSoon:`Bald fällig`,allGood:`Alles in Ordnung`,overdueBy:`Überfällig um {{duration}}`,dueIn:`Fällig in {{duration}}`,timeLeft:`{{duration}} verbleibend`,day:`1 Tag`,days:`{{count}} Tage`,week:`1 Woche`,weeks:`{{count}} Wochen`,month:`1 Monat`,months:`{{count}} Monate`,year:`1 Jahr`,maintenanceTypes:`Wartungstypen`,maintenanceTypesDescription:`Systemtypen und Ihre benutzerdefinierten Wartungsaufgaben`,addCustomType:`Benutzerdefinierten Typ hinzufügen`,restoreDefaults:`Standardaufgaben wiederherstellen`,intervalType:`Intervalltyp`,intervalValue:`Intervall ({{type}})`,icon:`Symbol`,documentationLink:`Dokumentationslink (optional)`,assignToPrinters:`Druckern zuweisen`,selectAtLeastOnePrinter:`Wählen Sie mindestens einen Drucker`,addType:`Typ hinzufügen`,custom:`Benutzerdefiniert`,printHours:`Druckstunden`,calendarDays:`Kalendertage`,exampleName:`z.B. HEPA-Filter ersetzen`,viewDocumentation:`Dokumentation anzeigen`,timeBasedInterval:`Zeitbasiertes Intervall`,intervalOverrides:`Intervall-Überschreibungen`,intervalOverridesDescription:`Intervalle für bestimmte Drucker anpassen`,assignedToPrinters:`Druckern zugewiesen:`,noPrintersAssigned:`Keine Drucker zugewiesen`,addPrinterShort:`Hinzufügen:`,printersAssignedClick:`{{count}} Drucker zugewiesen - klicken zum Verwalten`,removeFromPrinter:`Von diesem Drucker entfernen`,types:{lubricateCarbonRods:`Karbonstäbe schmieren`,lubricateRails:`Linearschienen schmieren`,cleanNozzle:`Düse/Hotend reinigen`,checkBelts:`Riemenspannung prüfen`,cleanBuildPlate:`Druckbett reinigen`,checkExtruder:`Extruderzahnräder prüfen`,checkCooling:`Kühlungslüfter prüfen`,generalInspection:`Allgemeine Inspektion`,cleanCarbonRods:`Kohlenstoffstangen reinigen`,lubricateSteelRods:`Stahlstangen schmieren`,cleanSteelRods:`Stahlstangen reinigen`,cleanLinearRails:`Linearschienen reinigen`,checkPtfeTube:`PTFE-Schlauch prüfen`,replaceHepaFilter:`HEPA-Filter ersetzen`,replaceCarbonFilter:`Aktivkohlefilter ersetzen`,lubricateLeftNozzleRail:`Linke Düsenschiene schmieren`},maintenanceComplete:`Wartung als abgeschlossen markiert`,typeUpdated:`Wartungstyp aktualisiert`,typeDeleted:`Wartungstyp gelöscht`,defaultsRestored:`{{count}} Standardaufgabe(n) wiederhergestellt`,printHoursUpdated:`Druckstunden aktualisiert`,printerAssigned:`Drucker zugewiesen`,printerRemoved:`Drucker entfernt`,deleteTypeConfirm:`"{{name}}" löschen?`,deleteSystemTypeTitle:`Standard-Wartungsaufgabe löschen?`,deleteSystemTypeMessage:`Möchten Sie die Standard-Wartungsaufgabe "{{name}}" wirklich löschen?`,noPermissionUpdate:`Sie haben keine Berechtigung, Wartungselemente zu aktualisieren`,noPermissionPerform:`Sie haben keine Berechtigung, Wartungen durchzuführen`,noPermissionEditTypes:`Sie haben keine Berechtigung, Wartungstypen zu bearbeiten`,noPermissionDeleteTypes:`Sie haben keine Berechtigung, Wartungstypen zu löschen`,noPermissionEditHours:`Sie haben keine Berechtigung, Druckstunden zu bearbeiten`,noPermissionRemovePrinter:`Sie haben keine Berechtigung, Druckerzuweisungen zu entfernen`,noPermissionAssignPrinter:`Sie haben keine Berechtigung, Drucker zuzuweisen`,noPermissionEditIntervals:`Sie haben keine Berechtigung, Intervalle zu bearbeiten`,configureSettings:`Wartungstypen und Intervalle konfigurieren`},settings:{sliceEngine:`Slice-Engine`,sliceEngineSidecar:`Server-Sidecar`,sliceEngineSidecarHint:`Das Slicing läuft auf dem Server im Slicer-Sidecar-Container.`,sliceEngineBrowser:`Im Browser`,sliceEngineBrowserHint:`Das Slicing läuft auf diesem Gerät, ohne Server.`,title:`Einstellungen`,general:`Allgemein`,tabs:{general:`Allgemein`,smartPlugs:`Smart Plugs`,sensors:`Sensoren`,notifications:`Benachrichtigungen`,queue:`Workflow`,queueDispatch:`Warteschlange & Dispatch`,queuePipelines:`Pipelines`,filament:`Filament`,network:`Netzwerk`,apiKeys:`API-Schlüssel`,virtualPrinter:`Virtueller Drucker`,spoolbuddy:`SpoolBuddy`,failureDetection:`Fehlererkennung`,users:`Authentifizierung`,backup:`Sicherung`,emailAuth:`E-Mail-Authentifizierung`,ldap:`LDAP`,twoFa:`Zwei-Faktor-Auth`,oidc:`SSO / OIDC`,security:`Sicherheit`},spoolbuddy:{infoTitle:`SpoolBuddy-Geräte`,infoBody:`SpoolBuddy-Kioske registrieren sich automatisch per Heartbeat. Ein Gerät hier abmelden, wenn es nicht mehr verwendet wird oder wenn ein veralteter Eintrag nach einem Daemon-Absturz übrig geblieben ist.`,duplicatesTitle:`{{count}} Geräte registriert`,duplicatesBody:`Die Kiosk-Oberfläche verwendet nur das zuerst registrierte Gerät. Falls eines davon ein veralteter Doppeleintrag nach einem Absturz ist, kann es hier entfernt werden — ein laufendes Gerät registriert sich beim nächsten Heartbeat automatisch neu.`,empty:`Noch keine SpoolBuddy-Geräte registriert.`,online:`Online`,offline:`Offline`,unregister:`Abmelden`,unregisterSuccess:`Gerät abgemeldet`,unregisterError:`Gerät konnte nicht abgemeldet werden`,confirmTitle:`SpoolBuddy-Gerät abmelden?`,confirmBody:`Dies entfernt „{{hostname}}" ({{deviceId}}) aus der Datenbank. Ein laufendes Gerät registriert sich beim nächsten Heartbeat automatisch neu.`,ipAddress:`IP-Adresse`,firmware:`Firmware`,lastSeen:`Zuletzt gesehen`,daemonUptime:`Daemon-Laufzeit`,systemUptime:`System-Laufzeit`,never:`nie`,nfc:`NFC`,scale:`Waage`,cpuTemp:`CPU-Temp.`,cpuLoad:`CPU-Last`,memory:`Speicher`,disk:`Festplatte`,update:`Aktualisieren`,updateConfirmTitle:`Spoolbuddy-Daemon aktualisieren?`,updateConfirmBody:`Software-Update auf „{{hostname}}" auslösen? Der Daemon startet nach dem Update neu.`,restartBrowser:`Browser neu starten`,restartBrowserConfirmTitle:`Kiosk-Browser neu starten?`,restartBrowserConfirmBody:`Kiosk-Browser auf „{{hostname}}" neu starten? Die Anzeige wird kurz schwarz.`,restartDaemon:`Daemon neu starten`,restartDaemonConfirmTitle:`Spoolbuddy-Daemon neu starten?`,restartDaemonConfirmBody:`Spoolbuddy-Daemon auf „{{hostname}}" neu starten? Das Gerät ist für einige Sekunden offline.`,reboot:`Neustart`,rebootConfirmTitle:`Gerät neu starten?`,rebootConfirmBody:`„{{hostname}}" neu starten? Das Gerät ist für etwa eine Minute offline.`,shutdown:`Herunterfahren`,shutdownConfirmTitle:`Gerät herunterfahren?`,shutdownConfirmBody:`„{{hostname}}" herunterfahren? Physischer Zugriff ist nötig, um es wieder einzuschalten.`,commandConfirm:`Bestätigen`,commandQueued:`Befehl eingereiht`,commandError:`Befehl konnte nicht gesendet werden`},ldap:{title:`LDAP-Authentifizierung`,enabledDesc:`LDAP-Authentifizierung ist aktiviert`,disabledDesc:`LDAP-Authentifizierung ist deaktiviert`,disabledHint:`LDAP-Einstellungen unten konfigurieren und speichern, dann aktivieren.`,enabled:`LDAP-Authentifizierung aktiviert`,disabled:`LDAP-Authentifizierung deaktiviert`,feature1:`Benutzer können sich mit LDAP-Anmeldedaten anmelden`,feature2:`Lokales Admin-Konto bleibt als Fallback erhalten`,feature3:`LDAP-Gruppen werden bei der Anmeldung BamBuddy-Gruppen zugeordnet`,serverConfig:`LDAP-Server-Konfiguration`,serverUrl:`Server-URL`,serverUrlHint:`Verwenden Sie ldap:// für Standard oder ldaps:// für SSL-Verbindungen`,security:`Sicherheit`,securityHint:`StartTLS aktualisiert eine einfache Verbindung auf TLS. LDAPS verwendet TLS von Anfang an.`,bindDn:`Bind-DN (Dienstkonto)`,bindPassword:`Bind-Passwort`,searchBase:`Such-Basis-DN`,userFilter:`Benutzer-Suchfilter`,userFilterHint:`{username} wird durch den Anmeldenamen ersetzt. Verwenden Sie (uid={username}) für OpenLDAP.`,advanced:`Erweitert`,autoProvision:`Benutzer automatisch anlegen`,autoProvisionHint:`Automatisch ein BamBuddy-Konto bei der ersten LDAP-Anmeldung erstellen`,defaultGroup:`Standardgruppe`,defaultGroupNone:`— Keine (kein Fallback) —`,defaultGroupHint:`Fallback-Gruppe, die zugewiesen wird, wenn sich ein LDAP-Benutzer authentifiziert, aber in keiner zugeordneten LDAP-Gruppe enthalten ist. Leer lassen, um nicht zugeordnete Benutzer ohne Berechtigungen zu belassen.`,groupMapping:`Gruppenzuordnung (JSON)`,groupMappingHint:`LDAP-Gruppen-DNs BamBuddy-Gruppen zuordnen. Verfügbare Gruppen: `,testConnection:`Verbindung testen`,settingsSaved:`LDAP-Einstellungen gespeichert`,errors:{serverRequired:`LDAP-Server-URL ist erforderlich`,searchBaseRequired:`Such-Basis-DN ist erforderlich`,enableAuthFirst:`Authentifizierung zuerst aktivieren`,configureLdapFirst:`LDAP-Einstellungen zuerst speichern`}},email:{smtpSettings:`SMTP-Konfiguration`,smtpHost:`SMTP-Server`,smtpPort:`SMTP-Port`,security:`Sicherheit`,authentication:`Authentifizierung`,username:`Benutzername`,password:`Passwort`,fromEmail:`Absender-E-Mail`,fromName:`Absendername`,testConnection:`SMTP-Verbindung testen`,testRecipient:`Test-Empfänger-E-Mail`,sendTest:`Test-E-Mail senden`,sending:`Wird gesendet...`,save:`Einstellungen speichern`,saving:`Wird gespeichert...`,advancedAuth:`Erweiterte Authentifizierung`,advancedAuthEnabled:`Erweiterte Authentifizierung ist aktiviert`,advancedAuthEnabledDesc:`E-Mail-basierte Benutzerverwaltungsfunktionen sind aktiv. Neue Benutzer erhalten automatisch generierte Passwörter per E-Mail und können ihr Passwort über die Passwort vergessen Funktion zurücksetzen.`,advancedAuthDisabled:`Erweiterte Authentifizierung ist deaktiviert`,advancedAuthDisabledDesc:`Aktivieren Sie die erweiterte Authentifizierung, um E-Mail-basierte Funktionen für die Benutzerverwaltung zu aktivieren.`,enable:`Aktivieren`,disable:`Deaktivieren`,feature1:`Passwörter werden automatisch generiert und an neue Benutzer gesendet`,feature2:`Benutzer können sich mit Benutzername oder E-Mail anmelden`,feature3:`Passwort vergessen Funktion ist verfügbar`,feature4:`Administratoren können Benutzerpasswörter per E-Mail zurücksetzen`,errors:{requiredFields:`Bitte füllen Sie alle Pflichtfelder aus`,usernameRequired:`Benutzername ist erforderlich, wenn Authentifizierung aktiviert ist`,enterTestEmail:`Bitte geben Sie eine Test-E-Mail-Adresse ein`,smtpServerAndEmail:`Bitte füllen Sie SMTP-Server und Absender-E-Mail aus, bevor Sie testen`,usernamePasswordRequired:`Benutzername und Passwort sind erforderlich, wenn Authentifizierung aktiviert ist`,configureSmtpFirst:`Bitte konfigurieren und testen Sie zuerst die SMTP-Einstellungen`,enableAuthFirst:`Bitte aktivieren Sie zuerst die Authentifizierung, um E-Mail-basierte Funktionen nutzen zu können.`},success:{settingsSaved:`SMTP-Einstellungen erfolgreich gespeichert`},securityOptions:{starttls:`STARTTLS (Port 587)`,ssl:`SSL/TLS (Port 465)`,none:`Keine (Port 25)`},authOptions:{enabled:`Aktiviert`,disabled:`Deaktiviert`}},appearance:`Erscheinungsbild`,notifications:`Benachrichtigungen`,smartPlugs:`Smart Plugs`,spoolman:`Spoolman`,updates:`Aktualisierungen`,language:`Sprache`,languageDescription:`Wählen Sie Ihre bevorzugte Sprache`,theme:`Design`,themeLight:`Hell`,themeDark:`Dunkel`,themeSystem:`System`,defaultView:`Standardansicht`,defaultViewDescription:`Seite, die beim Öffnen der App angezeigt wird`,checkForUpdates:`Nach Updates suchen`,autoUpdate:`Automatische Updates`,currentVersion:`Aktuelle Version`,latestVersion:`Neueste Version`,upToDate:`Sie sind auf dem neuesten Stand`,updateAvailable:`Update verfügbar`,notificationLanguage:`Benachrichtigungssprache`,notificationLanguageDescription:`Sprache für Push-Benachrichtigungen`,bedCooledThreshold:`Bett-Abkühlung Schwellenwert`,bedCooledThresholdDescription:`Temperatur, unter der das Bett nach einem Druck als abgekühlt gilt`,userNotificationsEnabled:`Benutzerbenachrichtigungen`,userNotificationsEnabledDescription:`Aktiviert das Benutzerbenachrichtigungsmenü und E-Mail-Benachrichtigungen für Druckereignisse. Erfordert Erweiterte Authentifizierung.`,userNotificationsDisabledHint:`Erweiterte Authentifizierung aktivieren, um Benutzerbenachrichtigungen zu verwenden.`,notificationProviders:`Benachrichtigungsanbieter`,addProvider:`Anbieter hinzufügen`,editProvider:`Anbieter bearbeiten`,providerType:`Anbietertyp`,testNotification:`Testbenachrichtigung`,testSuccess:`Testbenachrichtigung erfolgreich gesendet`,testFailed:`Testbenachrichtigung konnte nicht gesendet werden`,quietHours:`Ruhezeiten`,quietHoursDescription:`Keine Störungen während dieser Zeiten`,quietHoursStart:`Beginn`,quietHoursEnd:`Ende`,events:{title:`Benachrichtigungsereignisse`,printStart:`Druck gestartet`,printComplete:`Druck abgeschlossen`,printFailed:`Druck fehlgeschlagen`,printStopped:`Druck gestoppt`,printProgress:`Fortschrittsmeldungen`,printProgressDescription:`Bei 25%, 50%, 75% benachrichtigen`,printerOffline:`Drucker offline`,printerError:`Druckerfehler`,filamentLow:`Filament niedrig`,maintenanceDue:`Wartung fällig`,maintenanceDueDescription:`Benachrichtigen, wenn Wartung erforderlich`},smartPlug:{title:`Smart Plugs`,add:`Smart Plug hinzufügen`,edit:`Smart Plug bearbeiten`,name:`Name`,ipAddress:`IP-Adresse`,linkedPrinter:`Verknüpfter Drucker`,autoOn:`Automatisch einschalten`,autoOnDescription:`Einschalten beim Druckstart`,autoOff:`Automatisch ausschalten`,autoOffDescription:`Ausschalten nach Druckende`,offDelay:`Ausschaltverzögerung`,offDelayMinutes:`Minuten nach Druck`,offDelayTemp:`Wenn Düse unter Temperatur`,currentState:`Aktueller Status`,turnOn:`Einschalten`,turnOff:`Ausschalten`},filamentTracking:`Filament-Verfolgung`,filamentTrackingDesc:`Wählen Sie, wie Sie Ihre Filamentspulen verfolgen möchten. Sie können das integrierte Inventar oder einen externen Spoolman-Server verwenden.`,autoAddUnknownRfid:`Unbekannte RFID-Spulen automatisch hinzufügen`,autoAddUnknownRfidDesc:`Erstellt automatisch einen Inventareintrag, wenn eine Spule mit unbekanntem RFID-Tag erkannt wird. Deaktivieren, wenn Sie neue Spulen vorab manuell anlegen, um Duplikate zu vermeiden.`,filamentChecks:`Filament-Prüfungen`,disableFilamentWarnings:`Filament-Warnungen deaktivieren`,disableFilamentWarningsDesc:`Keine Warnungen über unzureichendes Filament beim Drucken oder Einreihen anzeigen`,preferLowestFilament:`Niedrigsten Filamentrest bevorzugen`,preferLowestFilamentDesc:`Bei mehreren passenden Spulen die mit dem geringsten Restfilament verwenden`,preferLowestFilamentBackupNote:`Wirkt nur, wenn AMS Filament Backup am Drucker aktiviert ist — sonst kann der Drucker beim Aufbrauchen der ersten Spule nicht auf eine zweite Spule wechseln.`,trackingModeBuiltIn:`Integriertes Inventar`,trackingModeBuiltInDesc:`RFID-Erkennung und Verbrauchserfassung inklusive`,trackingModeSpoolmanDesc:`Externer Filament-Management-Server`,builtInFeatureRfid:`Erkennt automatisch Bambu Lab RFID-Spulen im AMS`,builtInFeatureUsage:`Erfasst den Filamentverbrauch pro Druck`,builtInFeatureCatalog:`Spulen, Farben und K-Faktor-Profile verwalten`,builtInFeatureThirdParty:`Drittanbieter-Spulen können Inventarspulen zugewiesen werden`,amsSyncButton:`Gewichte vom AMS synchronisieren`,amsSyncTitle:`Spulengewichte vom AMS synchronisieren`,amsSyncMessage:`Alle Inventar-Spulengewichte werden mit den aktuellen AMS-Restwerten der verbundenen Drucker überschrieben. Verwenden Sie dies zur Wiederherstellung beschädigter Gewichtsdaten. Drucker müssen online sein.`,amsSyncing:`Synchronisiere...`,amsSyncSuccess:`{{synced}} Spule(n) synchronisiert, {{skipped}} übersprungen`,amsSyncError:`Synchronisierung der Gewichte vom AMS fehlgeschlagen`,spoolmanAmsSyncButton:`Spoolman-Gewichte vom AMS synchronisieren`,spoolmanAmsSyncTitle:`Spoolman-Spulengewichte vom AMS synchronisieren`,spoolmanAmsSyncMessage:`Dabei werden alle Spoolman-Spulengewichte anhand der aktuellen AMS-Füllstandswerte der verbundenen Drucker aktualisiert. Die Drucker müssen online sein.`,spoolmanAmsSyncing:`Synchronisiere...`,spoolmanAmsSyncSuccess:`{{synced}} Spule(n) synchronisiert, {{skipped}} übersprungen`,spoolmanAmsSyncError:`Synchronisierung der Spoolman-Gewichte vom AMS fehlgeschlagen`,spoolmanAmsSyncErrorUnreachable:`Synchronisierung fehlgeschlagen (Spoolman nicht erreichbar)`,spoolmanAmsSyncErrorNotConfigured:`Synchronisierung fehlgeschlagen (Spoolman nicht konfiguriert)`,spoolmanNotConfigured:`Spoolman nicht konfiguriert`,spoolmanFilamentCatalogTitle:`Spoolman-Filamentkatalog`,spoolmanFilamentCatalogDesc:`Filamentnamen und Leergewichte aus deiner Spoolman-Instanz. Name und Spulengewicht sind hier editierbar; alle anderen Eigenschaften werden direkt in Spoolman verwaltet.`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`URL Ihres Spoolman-Servers (z.B. http://localhost:7912)`,spoolmanConnected:`Verbunden`,spoolmanDisconnected:`Nicht verbunden`,status:`Status`,connect:`Verbinden`,disconnect:`Trennen`,howSyncWorks:`So funktioniert die Synchronisierung`,syncInfoRfidOnly:`Nur offizielle Bambu Lab Spulen mit RFID werden synchronisiert`,syncInfoAutoCreate:`Neue Spulen werden bei der ersten Synchronisierung automatisch in Spoolman erstellt`,syncInfoThirdPartySkipped:`Nicht-Bambu-Lab-Spulen (Drittanbieter, nachgefüllt) werden übersprungen`,linkingExistingSpools:`Vorhandene Spulen verknüpfen`,linkingExistingSpoolsDesc:`Um vorhandene Spoolman-Spulen mit Ihrem AMS zu verknüpfen, fahren Sie über einen AMS-Slot und klicken Sie auf "Mit Spoolman verknüpfen".`,syncMode:`Synchronisierungsmodus`,syncModeAuto:`Automatisch`,syncModeManual:`Nur manuell`,syncModeAutoDesc:`AMS-Daten werden automatisch synchronisiert, wenn Änderungen erkannt werden`,syncModeManualDesc:`Nur bei manueller Auslösung synchronisieren`,syncAmsData:`AMS-Daten synchronisieren`,syncAmsDataDesc:`AMS-Daten des Druckers manuell mit Spoolman synchronisieren`,allPrinters:`Alle Drucker`,noDefaultPrinter:`Kein Standard (jedes Mal fragen)`,sidebarOrder:`Seitenleisten-Reihenfolge`,saveThumbnails:`Vorschaubilder speichern`,captureFinishPhoto:`Abschlussfoto aufnehmen`,noPrintersConfigured:`Keine Drucker konfiguriert`,archiveMode:{always:`Immer Archiveintrag erstellen`,never:`Nie Archiveintrag erstellen`,ask:`Jedes Mal fragen`},checkForUpdatesLabel:`Nach Updates suchen`,checkPrinterFirmware:`Drucker-Firmware prüfen`,includeBetaUpdates:`Beta-Versionen einschließen`,includeBetaUpdatesDesc:`Über Beta- und Vorabversionen bei der Updateprüfung benachrichtigen`,localLogin:{disable:`Lokale Benutzername-/Passwort-Anmeldung deaktivieren`,disableHint:`Wenn aktiviert, ist nur die Anmeldung über SSO möglich. LDAP ist davon nicht betroffen. Setzen Sie BAMBUDDY_LOCAL_LOGIN=true auf dem Server, um einen Wiederherstellungsweg offen zu halten.`},enableRetry:`Wiederholung aktivieren`,homeAssistantDescription:`Smart Plugs über Home Assistant steuern`,environmentManagedLabel:`(Umgebungsvariable)`,autoEnabledViaEnv:`Automatisch über Umgebungsvariablen aktiviert`,urlFromEnvReadOnly:`Wert wird über HA_URL Umgebungsvariable gesetzt (schreibgeschützt)`,tokenFromEnvReadOnly:`Wert wird über HA_TOKEN Umgebungsvariable gesetzt (schreibgeschützt)`,mqttConnectedTo:`Verbunden mit`,prometheusDescription:`Druckerdaten im Prometheus-Format bereitstellen`,noSmartPlugsTitle:`Keine Smart Plugs konfiguriert`,noSmartPlugsDescription:`Fügen Sie einen Tasmota-basierten Smart Plug hinzu, um den Energieverbrauch zu verfolgen und die Stromsteuerung zu automatisieren.`,noProvidersTitle:`Keine Anbieter konfiguriert`,noProvidersDescription:`Fügen Sie einen Anbieter hinzu, um Benachrichtigungen zu erhalten.`,noTemplatesAvailable:`Keine Vorlagen verfügbar. Starten Sie das Backend neu, um Standardvorlagen zu laden.`,apiPermissionView:`Druckerstatus und Warteschlange anzeigen`,apiPermissionEdit:`Elemente zur Druckwarteschlange hinzufügen und entfernen`,apiKeysEmptyTitle:`Keine API-Schlüssel`,apiKeysEmptyDescription:`Erstellen Sie einen API-Schlüssel zur Integration mit externen Diensten.`,noUsersFound:`Keine Benutzer gefunden`,noGroupsFound:`Keine Gruppen gefunden`,noGroupsAvailable:`Keine Gruppen verfügbar`,passwordsDoNotMatch:`Passwörter stimmen nicht überein`,systemGroupWarning:`System-Gruppennamen können nicht geändert werden`,authDisabledTitle:`Authentifizierung ist deaktiviert`,authDisabledFeature1:`Anmeldung zum Zugriff auf das System erforderlich`,authDisabledFeature2:`Mehrere Benutzer mit gruppenbasierten Berechtigungen erstellen`,authDisabledFeature3:`Zugriff mit über 50 granularen Berechtigungen steuern`,userHasCreated:`Dieser Benutzer hat erstellt:`,userItemsQuestion:`Was möchten Sie mit diesen Elementen tun?`,deleteUserConfirm:`Möchten Sie diesen Benutzer wirklich löschen?`,actionCannotBeUndone:`Diese Aktion kann nicht rückgängig gemacht werden.`,addFirstSmartPlug:`Ersten Smart Plug hinzufügen`,providers:`Anbieter`,log:`Protokoll`,testAll:`Alle testen`,testResults:`Testergebnisse`,testPassedCount:`{{count}} bestanden`,testFailedCount:`{{count}} fehlgeschlagen`,messageTemplates:`Nachrichtenvorlagen`,messageTemplatesDescription:`Passen Sie Benachrichtigungen für jedes Ereignis an.`,apiKeys:`API-Schlüssel`,apiKeysDescription:`Erstellen Sie API-Schlüssel für externe Integrationen und Webhooks.`,createKey:`Schlüssel erstellen`,apiKeyCreated:`API-Schlüssel erfolgreich erstellt`,apiKeyCopyWarning:`Kopieren Sie diesen Schlüssel jetzt - er wird nicht mehr angezeigt!`,useInApiBrowser:`Im API-Browser verwenden`,apiKeyQrButton:`QR-Code`,apiKeyQrTitle:`Zum Einrichten scannen`,apiKeyQrCaption:`Mit deiner mobilen App scannen, um diesen Server und API-Schlüssel hinzuzufügen.`,apiKeyQrWarning:`Enthält deinen geheimen API-Schlüssel – nicht teilen oder dort abfotografieren, wo andere ihn sehen können.`,createNewApiKey:`Neuen API-Schlüssel erstellen`,keyName:`Schlüsselname`,keyNamePlaceholder:`z.B. Home Assistant, OctoPrint`,readStatus:`Status lesen`,readStatusDescription:`Druckerstatus, Warteschlange, Bibliothek, Archive und Slicer-Pipelines anzeigen`,manageQueue:`Warteschlange verwalten`,manageQueueDescription:`Elemente zur Druckwarteschlange hinzufügen und entfernen. Zusammen mit "Bibliothek verwalten" Slicer-Pipelines ausführen`,controlPrinter:`Drucker steuern`,controlPrinterDescription:`Drucke pausieren, fortsetzen und stoppen`,manageLibrary:`Bibliothek verwalten`,manageLibraryDescription:`Bibliotheksdateien hochladen, umbenennen, löschen und slicen; Modelle aus MakerWorld importieren. Zusammen mit "Warteschlange verwalten" Slicer-Pipelines ausführen`,manageInventory:`Bestand verwalten`,manageInventoryDescription:`Spulen und Bestandseinträge anlegen, ändern und löschen. Erforderlich für SpoolBuddy-Kioske (NFC-Scan, Waagenmessungen, Kiosk-Systembefehle).`,manageMaintenance:`Wartung verwalten`,manageMaintenanceDescription:`Abgeschlossene Wartungen protokollieren, Zähler zurücksetzen, Intervalle bearbeiten und den Wartungstyp-Katalog verwalten. Geeignet für Home-Assistant-Automatisierungen, die „Düse gereinigt" protokollieren, ohne umfassendere Druckersteuerung zu gewähren.`,manageArchives:`Archive verwalten`,manageArchivesDescription:`Druckarchive bearbeiten und löschen, einschließlich des Entfernens alter Drucke und ihres Statistikbeitrags. Geeignet für Automatisierungen, die den Druckverlauf ausdünnen.`,manageProjects:`Projekte verwalten`,manageProjectsDescription:`Projekte erstellen, aktualisieren und löschen sowie Archive zu ihnen hinzufügen. Geeignet für Automatisierungen, die Drucke in Projekten organisieren.`,maintenanceBadge:`Wartung`,archivesBadge:`Archive`,projectsBadge:`Projekte`,libraryBadge:`Bibliothek`,inventoryBadge:`Bestand`,cloudAccess:`Cloud-Zugriff erlauben`,cloudAccessDescription:`Liest Bambu-Cloud-Presets und -Filamente in Ihrem Namen. Erfordert eine Anmeldung in Bambu Cloud.`,cloudBadge:`Cloud`,updateEnergyCost:`Strompreis aktualisieren`,updateEnergyCostDescription:`Erlaubt diesem Schlüssel, einen neuen Strompreis pro kWh an /settings/electricity-price zu senden. Nützlich für Home-Assistant-Automatisierungen mit dynamischen Tarifen (Tibber, Octopus usw.). Dies ist das einzige Einstellungsfeld, das per API-Schlüssel schreibbar ist.`,energyCostBadge:`Energie`,legacyKey:`Alt`,legacyKeyTooltip:`Wurde vor der nutzerbezogenen Eigentümerschaft erstellt; neu erstellen, um Cloud-Zugriff zu nutzen`,unnamedKey:`Unbenannter Schlüssel`,lastUsed:`Zuletzt verwendet`,read:`Lesen`,control:`Steuern`,createFirstKey:`Ersten Schlüssel erstellen`,webhookEndpoints:`Webhook-Endpunkte`,webhookApiKeyHint:`Verwenden Sie Ihren API-Schlüssel im X-API-Key-Header.`,webhook:{getAllStatus:`Alle Druckerstatus abrufen`,getSpecificStatus:`Spezifischen Druckerstatus abrufen`,addToQueue:`Zur Druckwarteschlange hinzufügen`,pausePrint:`Druck pausieren`,resumePrint:`Druck fortsetzen`,stopPrint:`Druck stoppen`},apiBrowser:`API-Browser`,apiBrowserDescription:`Erkunden und testen Sie alle verfügbaren API-Endpunkte.`,apiKeyForTesting:`API-Schlüssel zum Testen`,apiKeyPlaceholder:`Fügen Sie hier Ihren API-Schlüssel ein, um authentifizierte Endpunkte zu testen...`,apiKeyHint:`Dieser Schlüssel wird als X-API-Key-Header mit Anfragen gesendet.`,deleteApiKeyTitle:`API-Schlüssel löschen`,deleteApiKeyMessage:`Möchten Sie diesen API-Schlüssel wirklich löschen? Alle Integrationen, die diesen Schlüssel verwenden, funktionieren nicht mehr.`,deleteKey:`Schlüssel löschen`,amsDisplayThresholds:`AMS-Anzeigeschwellenwerte`,amsThresholdsDescription:`Konfigurieren Sie Farbschwellenwerte für AMS-Feuchtigkeits- und Temperaturanzeigen.`,humidity:`Luftfeuchtigkeit`,goodGreen:`Gut (grün)`,fairOrange:`Mittel (orange)`,aboveFairBad:`Über dem mittleren Schwellenwert wird rot angezeigt (schlecht)`,fairAlsoDryingThreshold:`Dieser Schwellenwert wird auch für die automatische Trocknung verwendet`,fairBelowDryingFloor:`Die automatische Trocknung kann diesen Wert nicht erreichen: Ein AMS meldet bei laufender Heizung {{floor}} % oder mehr, sodass jeder Zyklus enden und sofort neu starten würde. Setzen Sie ihn über {{floor}} %, wenn die automatische Trocknung aktiv ist.`,temperature:`Temperatur`,goodBlue:`Gut (blau)`,aboveFairHot:`Über dem mittleren Schwellenwert wird rot angezeigt (heiß)`,tempAlarmThreshold:`Alarm über`,tempAlarmSeparateFromBand:`Nur der Alarm-Schwellenwert löst Benachrichtigungen aus — Gut und Mittel färben nur die Anzeige. Leer lassen, um wie bisher beim mittleren Schwellenwert zu alarmieren.`,tempAlarmMustBePositive:`Ein Schwellenwert von 0 oder weniger wird ignoriert — der Alarm nutzt dann den mittleren Schwellenwert.`,historyRetention:`Verlaufsaufbewahrung`,keepSensorHistory:`Sensorverlauf behalten für`,historyRetentionDescription:`Ältere Feuchtigkeits- und Temperaturdaten werden automatisch gelöscht`,defaultPrintOptions:`Standard-Druckoptionen`,defaultPrintOptionsDescription:`Standardwerte für Druckoptionen bei neuen Drucken festlegen. Diese können im Druckdialog pro Druck überschrieben werden.`,defaultBedLevelling:`Bett-Nivellierung`,defaultBedLevellingDesc:`Bett vor dem Druck automatisch nivellieren`,defaultFlowCali:`Fluss-Kalibrierung`,defaultFlowCaliDesc:`Extrusionsfluss kalibrieren`,defaultVibrationCali:`Vibrationskalibrierung`,defaultVibrationCaliDesc:`Ringing-Artefakte reduzieren`,defaultLayerInspect:`Erste-Schicht-Inspektion`,defaultLayerInspectDesc:`KI-Inspektion der ersten Schicht`,defaultTimelapse:`Zeitraffer`,defaultTimelapseDesc:`Zeitraffervideo aufnehmen`,defaultNozzleOffsetCali:`Düsenversatz-Kalibrierung`,defaultNozzleOffsetCaliDesc:`Düsenversatz zwischen Extrudern kalibrieren`,tempFanPresetsTitle:`Temperatur- und Lüfter-Vorgaben`,tempFanPresetsDescription:`Passen Sie die Schnellwahlwerte in den Temperatur- und Lüfter-Popovers der Druckerkarte an. Die Aus-Schaltfläche wird immer angezeigt.`,tempFanPresetsNozzle:`Düsentemperatur`,tempFanPresetsBed:`Betttemperatur`,tempFanPresetsChamber:`Kammertemperatur`,tempFanPresetsFan:`Lüftergeschwindigkeit`,tempFanPresetsReset:`Auf Standardwerte zurücksetzen`,concurrentUploadsTitle:`Gleichzeitige Uploads`,concurrentUploadsDescription:`Wie viele Drucker die Warteschlange gleichzeitig mit Dateien versorgen darf. Drucker nehmen Dateien nur langsam entgegen (ein großer Druck kann mehrere Minuten dauern), und jeder wartet, bis er an der Reihe ist — bei größeren Farmen verhindert ein höherer Wert also, dass der letzte Drucker eines Stapels erst alle anderen Übertragungen abwarten muss. Verringern Sie ihn, wenn Ihr Netzwerk oder der Bambuddy-Host mit parallelen Übertragungen Probleme hat.`,concurrentUploadsLabel:`Gleichzeitig belieferte Drucker`,concurrentUploadsHelp:`1 beliefert immer nur einen Drucker (das bisherige Verhalten). Standard ist 4.`,staggeredStart:`Versetzter Start`,staggeredStartDescription:`Standard-Gruppengröße und -Intervall beim Staffeln von Mehrdrucker-Batchstarts. Pro Batch im Druck-Dialog überschreibbar.`,preheatTitle:`Vorheizen & Heat Soak`,preheatDescription:`Heizt das Bett (und die Kammer, sofern unterstützt) auf und hält die Temperatur, bevor jeder Druck aus der Warteschlange startet. Hilfreich für technische Filamente (PA, ABS) auf Druckern ohne aktive Kammerheizung — das Bett wärmt die Kammer per Abstrahlung, während der Soak-Timer läuft. Die Bett-Zieltemperatur wird aus der Druckdatei gelesen; das Kammerverhalten hängt vom Druckermodell ab.`,preheatEnabled:`Vorheizen & Soak aktivieren`,preheatEnabledDesc:`Wenn aus, starten Drucke aus der Warteschlange sofort. Jeder Warteschlangeneintrag kann das pro Druck überschreiben.`,preheatFilamentTargetsLabel:`Kammer-Ziel je Filament (°C)`,preheatFilamentTargetsHint:`Bambuddy wählt das höchste Ziel über die geladenen AMS-Slots. Ein Druck, dessen Slots alle 0 ergeben – PLA, PETG, TPU, PVA –, überspringt das Vorheizen vollständig und startet sofort.`,preheatFilamentTargetsReset:`Auf Standardwerte zurücksetzen`,preheatFilamentTargetsDefaultRow:`Sonstige / nicht zugeordnet`,preheatMaxWait:`Max. Wartezeit (Sekunden)`,preheatMaxWaitHelp:`Obergrenze für die Aufwärmphase, bevor in den Soak gewechselt wird.`,preheatSoak:`Soak (Sekunden)`,preheatSoakHelp:`Haltezeit nach Erreichen des Ziels oder nach Ablauf der Max-Wartezeit.`,preheatHardwareTitle:`Verhalten je Drucker:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E heizen die Kammer aktiv per M141. X1C/P2S lesen die Kammertemperatur, heizen sie aber nur per Bett-Abstrahlung. P1S/P1P/A1/A1 Mini haben keinen Kammersensor — nur der Soak-Timer greift.`,preheatPerItemDesc:`Bett und Kammer vor diesem Druck aufheizen. Standardmäßig wird der globale Umschalter aus Einstellungen → Workflow verwendet.`,preheatOverride_inherit:`Übernehmen`,preheatOverride_on:`An`,preheatOverride_off:`Aus`,calibrationMode_off:`Aus`,calibrationMode_on:`An`,calibrationMode_auto:`Auto`,preheatTargetOverride:`Kammer-Ziel überschreiben (°C, leer = Filament-Standard)`,preheatTargetOverrideHelp:`0 heizt das Bett und führt das Halten ohne Kammer aus. Bleibt das Feld leer, überspringt ein Druck ohne Kammerbedarf das Vorheizen vollständig.`,plateClear:`Druckplatte-Bestätigung`,requirePlateClear:`Druckplatte-Bestätigung erforderlich`,requirePlateClearDescription:`Wenn aktiviert, wartet der Scheduler auf eine Druckplatten-Bestätigung pro Drucker, bevor geplante Drucke auf Druckern mit abgeschlossenen Aufträgen gestartet werden. Wenn dies deaktiviert ist, werden auch das Druckplatten-Status-Badge und die Schaltfläche "Druckplatte als freigegeben markieren" auf den Druckerkarten ausgeblendet.`,keepBedWarm:`Heizbett zwischen Drucken warmhalten`,keepBedWarmDesc:`Während auf die Druckplatten-Bestätigung gewartet wird, wird das Heizbett auf der unten eingestellten Warmhalte-Temperatur gehalten, damit die Kammer warm bleibt — oder auf der Betttemperatur des nächsten Drucks, falls diese höher ist. Gilt nur, wenn der nächste Druck Kammerwärme benötigt (ASA, ABS, PA, PC usw.). Erfordert aktivierte Druckplatten-Bestätigung.`,keepWarmBedTemp:`Warmhalte-Temperatur des Heizbetts (°C)`,keepWarmBedTempHelp:`Wird verwendet, wenn das Bett die Kammer heizen soll — beim Warmhalten und beim Vorheizen, wenn die Druckdatei keine Betttemperatur enthält. Eine höhere Betttemperatur aus der Druckdatei hat immer Vorrang.`,keepWarmMaxMinutes:`Warmhalten beenden nach (Minuten)`,keepWarmMaxMinutesHelp:`Wird die Druckplatte nicht innerhalb dieser Zeit geleert, werden die Heizungen abgeschaltet statt dauerhaft zu heizen.`,gcodeInjection:`G-Code-Injektion`,gcodeInjectionDescription:`Konfigurieren Sie benutzerdefinierten G-code, der am Anfang und/oder Ende von Drucken für Auto-Print-Systeme wie Farmloop, SwapMod, AutoClear und Printflow 3D eingefügt wird. Snippets werden pro Druckermodell konfiguriert und angewendet, wenn "G-code einfügen" bei einem Warteschlangen-Element aktiviert ist.`,gcodeInjectionNoPrinters:`Keine Drucker gefunden. Fügen Sie Drucker hinzu, um G-code-Snippets zu konfigurieren.`,gcodeStartLabel:`Start-G-Code`,gcodeEndLabel:`End-G-Code`,gcodeStartPlaceholder:`G-code, der vor dem Druckstart eingefügt wird...`,gcodeEndPlaceholder:`G-code, der nach dem Druckende angefügt wird...`,staggerGroupSize:`Gruppengröße`,staggerGroupSizeHelp:`Anzahl gleichzeitig zu startender Drucker pro Gruppe`,staggerInterval:`Intervall (Minuten)`,staggerIntervalHelp:`Verzögerung zwischen Gruppenstart`,queueDrying:`Automatische Trocknung`,queueDryingDescription:`AMS-Filament automatisch trocknen, wenn der Drucker zwischen Warteschlangen-Drucken im Leerlauf ist. Verwendet den Feuchtigkeitsschwellenwert oben.`,queueDryingEnabled:`Automatische Trocknung aktivieren`,queueDryingEnabledDescription:`AMS-Trocknung automatisch starten, wenn der Drucker im Leerlauf ist und die Feuchtigkeit über dem Schwellenwert liegt`,queueDryingBlock:`Auf Trocknung warten`,queueDryingBlockDescription:`Druckwarteschlange blockieren, bis die Trocknung abgeschlossen ist. Wenn aus, haben Drucke Vorrang.`,ambientDryingEnabled:`Umgebungstrocknung`,ambientDryingEnabledDescription:`Filament auf inaktiven Druckern automatisch trocknen, wenn die Luftfeuchtigkeit den Schwellenwert überschreitet — auch ohne Warteschlange.`,printDryingEnabled:`Trocknen während des Drucks`,printDryingEnabledDescription:`Automatische Trocknung auch während eines laufenden Drucks auf unterstützter Hardware (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L mit aktueller Firmware). Die Trocknungstemperatur wird zum Schutz der Spulen automatisch um 5°C unter dem Leerlaufwert begrenzt.`,dryingPresets:`Trocknungsvoreinstellungen`,dryingPresetsDescription:`Temperatur und Dauer pro Filamenttyp. AMS 2 Pro verwendet niedrigere Temperaturen, AMS-HT unterstützt höhere.`,dryingFilament:`Filament`,humidityThresholds:`Feuchtigkeitsschwellen`,humidityThresholdsDescription:`Feuchtigkeitsauslöser pro Filamenttyp für Auto-Trocknung und Alarme. Bei gemischter Bestückung gilt der niedrigste Wert.`,humidityThresholdCol:`Schwellenwert`,humidityThresholdDefault:`Standard (unbekannte Typen)`,printModal:`Druckdialog`,expandCustomMapping:`Benutzerdefinierte Zuordnung standardmäßig erweitern`,expandCustomMappingDescription:`Bei Druck auf mehrere Drucker die AMS-Zuordnung pro Drucker erweitert anzeigen`,authentication:`Authentifizierung`,authEnabledDescription:`Ihre Instanz ist mit Benutzerauthentifizierung gesichert`,authDisabledDescription:`Aktivieren Sie die Anmeldepflicht und verwalten Sie den Benutzerzugriff`,authDisabledMessage:`Aktivieren Sie die Authentifizierung, um Benutzerkonten zu erstellen, Berechtigungen zu verwalten und Ihre Bambuddy-Instanz zu sichern.`,enableAuthentication:`Authentifizierung aktivieren`,currentUser:`Aktueller Benutzer`,changePassword:`Passwort ändern`,admin:`Admin`,users:`Benutzer`,addUser:`Benutzer hinzufügen`,groups:`Gruppen`,addGroup:`Gruppe hinzufügen`,system:`System`,noDescription:`Keine Beschreibung`,userCount:`{{count}} Benutzer`,permissionCount:`{{count}} Berechtigungen`,createUser:`Benutzer erstellen`,username:`Benutzername`,enterUsername:`Benutzername eingeben`,password:`Passwort`,enterPassword:`Passwort eingeben`,passwordRequirements:`Mindestens 8 Zeichen, davon ein Großbuchstabe, ein Kleinbuchstabe, eine Ziffer und ein Sonderzeichen.`,confirmPassword:`Passwort bestätigen`,confirmPasswordPlaceholder:`Passwort bestätigen`,viewReleaseOnGitHub:`Release auf GitHub anzeigen`,turnAllPlugsOn:`Alle Stecker einschalten`,turnAllPlugsOff:`Alle Stecker ausschalten`,clearNotificationLogs:`Benachrichtigungsprotokolle löschen`,clearLogsMessage:`Dadurch werden alle Benachrichtigungsprotokolle, die älter als 30 Tage sind, dauerhaft gelöscht. Diese Aktion kann nicht rückgängig gemacht werden.`,clearLogs:`Protokolle löschen`,resetUiPreferences:`UI-Einstellungen zurücksetzen`,resetUiPreferencesMessage:`Dadurch werden alle UI-Einstellungen auf Standardwerte zurückgesetzt: Seitenleisten-Reihenfolge, Theme, Dashboard-Layout, Ansichtsmodi und Sortiereinstellungen. Ihre Drucker, Archive und Servereinstellungen werden NICHT beeinträchtigt. Die Seite wird nach dem Löschen neu geladen.`,resetPreferences:`Einstellungen zurücksetzen`,deleteGroupTitle:`Gruppe löschen`,deleteGroupMessage:`Möchten Sie diese Gruppe wirklich löschen? Benutzer in dieser Gruppe verlieren diese Berechtigungen.`,deleteGroup:`Gruppe löschen`,disableAuthenticationTitle:`Authentifizierung deaktivieren`,disableAuthenticationMessage:`Möchten Sie die Authentifizierung wirklich deaktivieren? Dadurch wird Ihre Bambuddy-Instanz ohne Anmeldung zugänglich. Alle Benutzer bleiben in der Datenbank, aber die Authentifizierung wird deaktiviert.`,disableAuthentication:`Authentifizierung deaktivieren`,configureBambuddy:`Bambuddy konfigurieren`,systemDefault:`Systemstandard`,archiveSettings:`Archiv-Einstellungen`,newWindow:`Neues Fenster`,embeddedOverlay:`Eingebettetes Overlay`,preferredSlicer:`Bevorzugter Slicer`,preferredSlicerDescription:`Slicer für das In-App-Slicen über das API-Sidecar`,openInSlicerLabel:`Im Slicer öffnen`,openInSlicerInherit:`Wie API-Slicer`,openInSlicerDescription:`Desktop-Slicer, der vom „Im Slicer öffnen"-Button verwendet wird. Auf „Wie API-Slicer" belassen, um zu erben, oder einen anderen Slicer für die lokale Nutzung wählen.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev haben bekannte CLI-Bugs, die das Slicen vieler von BambuStudio erstellter 3MF-Dateien blockieren — siehe Upstream-Issues #12426 (Segfault bei bemalten Multi-Extruder-Dateien) und #13386 (zu strikte Parameter-Range-Validierung). Bis die Upstream-Fixes verfügbar sind, wird Bambu Studio empfohlen.`,useSlicerApi:`Slicer-API verwenden`,useSlicerApiDescription:`Wenn aktiv, öffnen "Slice"-Aktionen das in-App Slicer-Modal und rufen den Slicer-API-Sidecar. Aus (Standard): Übergabe an den Desktop-Slicer per URI-Schema.`,slicerCard:`Slicer`,orcaslicerApiUrl:`OrcaSlicer Sidecar-URL`,bambuStudioApiUrl:`Bambu Studio Sidecar-URL`,slicerStallTimeout:`Zeitlimit bei Slicer-Stillstand (Minuten)`,slicerStallTimeoutDescription:`Bricht einen Slice-Vorgang ab, wenn der Sidecar so lange keinen Fortschritt meldet. Aufwendige Modelle, die weiter Fortschritt melden, werden nie abgebrochen, egal wie lange sie brauchen. Sidecars ohne Fortschrittsmeldung nutzen diesen Wert stattdessen als Gesamtzeitlimit.`,slicerApiUrlDescription:`URL des Slicer-API-Sidecar-Containers. Leer lassen, um die SLICER_API_URL- bzw. BAMBU_STUDIO_API_URL-Umgebungsvariablen zu nutzen.`,externalCameras:`Externe Kameras`,costTracking:`Kostenverfolgung`,billingEnabled:`Abrechnung aktivieren`,billingEnabledDescription:`Kostenstellen aktivieren und Drucke verbuchen`,printerKillSwitch:`Automatischer Druckstopp`,printerKillSwitchDescription:`Drucke ohne Authorisierung sofort abbrechen`,financeBudgetReset:`Finanzbudget monatlich zurücksetzen`,financeBudgetResetDay:`Reset-Tag`,financeBudgetResetDayHelp:`Für kurze Monate verwendet der Reset den letzten Tag des Monats.`,financeBudgetResetTimezone:`Reset-Zeitzone`,financeBudgetResetTimezoneHelp:`Der Budget-Fenster-Start wird in dieser Zeitzone berechnet.`,rebuildLedger:`Ledger wiederaufbauen`,rebuildLedgerStarted:`Ledger-Wiederaufbau gestartet`,rebuildLedgerConfirmTitle:`Ledger wiederaufbauen?`,rebuildLedgerConfirmMessage:`Dies baut das Wallet-Ledger neu auf, um historische Saldenwerte zu reparieren. Führen Sie dies nur aus, wenn Sie genau wissen, was Sie tun.`,rebuildLedgerInProgress:`Wiederaufbau wird gestartet...`,printsOnly:`Nur Drucke`,totalConsumption:`Gesamtverbrauch`,dataManagement:`Datenverwaltung`,storageUsage:`Speichernutzung`,storageUsageDescription:`Aufschlüsselung der Datennutzung nach Kategorie`,storageUsageTotal:`Gesamt`,storageUsageErrors:`Fehler`,storageUsageOtherBreakdown:`Sonstiges (enthält statische Assets, Skripte und Konfigurationsdateien)`,storageUsageSystem:`System`,storageUsageData:`Daten`,storageUsageUnavailable:`Speichernutzungsinformationen nicht verfügbar`,clearNotificationLogsDescription:`Benachrichtigungsprotokolle älter als 30 Tage löschen`,resetUiPreferencesDescription:`Seitenleisten-Reihenfolge, Theme, Ansichtsmodi und Layout-Einstellungen zurücksetzen. Drucker, Archive und Einstellungen werden nicht beeinflusst.`,enableHomeAssistant:`Home Assistant aktivieren`,enableMqtt:`MQTT aktivieren`,useTls:`TLS verwenden`,enableMetricsEndpoint:`Metrik-Endpunkt aktivieren`,availableMetrics:`Verfügbare Metriken`,editUser:`Benutzer bearbeiten`,deleteUserTitle:`Benutzer löschen`,groupName:`Gruppenname`,leaveEmptyForAnonymous:`Leer lassen für anonym`,leaveEmptyForNoAuth:`Leer lassen für keine Authentifizierung`,enterNewPassword:`Neues Passwort eingeben`,confirmNewPassword:`Neues Passwort bestätigen`,enterGroupName:`Gruppenname eingeben`,enterDescriptionOptional:`Beschreibung eingeben (optional)`,enterCurrentPassword:`Aktuelles Passwort eingeben`,enterNewPasswordMin6:`Neues Passwort eingeben (min. 6 Zeichen)`,toast:{keyCopied:`Schlüssel in Zwischenablage kopiert`,copyFailed:`Schlüssel konnte nicht kopiert werden`,keyAddedToBrowser:`Schlüssel zum API-Browser hinzugefügt`,clearLogsFailed:`Protokolle konnten nicht gelöscht werden`,uiPreferencesReset:`UI-Einstellungen zurückgesetzt. Wird neu geladen...`,authDisabled:`Authentifizierung erfolgreich deaktiviert`,authDisableFailed:`Authentifizierung konnte nicht deaktiviert werden`,apiKeyCreated:`API-Schlüssel erstellt`,apiKeyDeleted:`API-Schlüssel gelöscht`,userCreated:`Benutzer erfolgreich erstellt`,userUpdated:`Benutzer erfolgreich aktualisiert`,userDeleted:`Benutzer erfolgreich gelöscht`,groupCreated:`Gruppe erfolgreich erstellt`,groupUpdated:`Gruppe erfolgreich aktualisiert`,groupDeleted:`Gruppe erfolgreich gelöscht`,fillRequiredFields:`Bitte füllen Sie alle erforderlichen Felder aus`,passwordsDoNotMatch:`Passwörter stimmen nicht überein`,passwordTooShort:`Passwort muss mindestens 8 Zeichen lang sein`,passwordNeedsUppercase:`Passwort muss mindestens einen Großbuchstaben enthalten`,passwordNeedsLowercase:`Passwort muss mindestens einen Kleinbuchstaben enthalten`,passwordNeedsDigit:`Passwort muss mindestens eine Ziffer enthalten`,passwordNeedsSpecial:`Passwort muss mindestens ein Sonderzeichen enthalten`,enterGroupName:`Bitte geben Sie einen Gruppennamen ein`,settingsSaved:`Einstellungen gespeichert`,noPermissionUpdate:`Sie haben keine Berechtigung, Einstellungen zu ändern`,cameraSettingsSaved:`Kamera-Einstellungen gespeichert`,enterCameraUrl:`Bitte geben Sie eine Kamera-URL ein`,passwordChanged:`Passwort erfolgreich geändert`,connectionFailed:`Verbindung fehlgeschlagen`,testFailed:`Test fehlgeschlagen`,cameraConnected:`Kamera verbunden{{resolution}}`,cameraConnectedCoalesced:`Kamera verbunden{{resolution}} (geteilt mit einer bereits laufenden Aufnahme)`},testConnection:`Verbindung testen`,catalog:{spoolCatalog:`Spulenkatalog`,spoolCatalogDescription:`Leerspulengewichte nach Marke/Typ. Wird für die automatische Gewichtssuche beim Hinzufügen von Spulen verwendet.`,searchCatalog:`Katalog durchsuchen...`,addNewEntry:`Neuen Eintrag hinzufügen`,namePlaceholder:`Name (z.B. Bambu Lab - Plastik)`,weight:`Gewicht`,type:`Typ`,default:`Standard`,custom:`Benutzerdefiniert`,noMatch:`Keine Einträge entsprechen Ihrer Suche`,empty:`Keine Einträge im Katalog`,deleteEntry:`Eintrag löschen`,deleteConfirm:`Möchten Sie "{{name}}" wirklich löschen?`,resetCatalog:`Katalog zurücksetzen`,resetConfirm:`Katalog auf Standardwerte zurücksetzen? Alle benutzerdefinierten Einträge werden entfernt.`,loadFailed:`Spulenkatalog konnte nicht geladen werden`,nameWeightRequired:`Name und Gewicht sind erforderlich`,entryAdded:`Eintrag hinzugefügt`,addFailed:`Eintrag konnte nicht hinzugefügt werden`,entryUpdated:`Eintrag aktualisiert`,updateFailed:`Eintrag konnte nicht aktualisiert werden`,entryDeleted:`Eintrag gelöscht`,deleteFailed:`Eintrag konnte nicht gelöscht werden`,resetSuccess:`Katalog auf Standardwerte zurückgesetzt`,resetFailed:`Katalog konnte nicht zurückgesetzt werden`,exported:`{{count}} Einträge exportiert`,imported:`{{added}} Einträge importiert ({{skipped}} übersprungen)`,importFailed:`Import fehlgeschlagen: ungültiges JSON-Format`,exportTooltip:`Katalog als JSON exportieren`,importTooltip:`Katalog aus JSON importieren`,resetTooltip:`Auf Standardwerte zurücksetzen`,selectedCount:`{{count}} ausgewählt`,deleteSelected:`Ausgewählte löschen`,bulkDeleteConfirm:`Möchten Sie {{count}} Einträge wirklich löschen?`,bulkDeleted:`{{count}} Einträge gelöscht`,bulkDeleteFailed:`Fehler beim Löschen der Einträge`,material:`Material`,spoolWeight:`Spulengewicht`,color:`Farbe`,updateSpoolWeight:`Spulengewicht aktualisieren`,filamentUpdated:`Filament aktualisiert`,filamentUpdateFailed:`Filament konnte nicht aktualisiert werden`,filamentUpdateInvalid:`Ungültige Filamentdaten`,keepExistingSpoolWeight:`Altes Gewicht für bestehende Spulen behalten`,keepExistingSpoolWeightDesc:`Bereits erstellte Spulen dieses Filamenttyps behalten das alte Leergewicht. Neue Spulen nutzen den neuen Wert.`,applyToAllSpools:`Auf alle Spulen anwenden`,applyToAllSpoolsDesc:`Alle Gewichtsberechnungen für diesen Filamenttyp nutzen sofort das neue Leergewicht.`},colorCatalog:{title:`Farbkatalog`,description:`Filamentfarben nach Hersteller/Material. Wird für die automatische Farbsuche beim Hinzufügen von Spulen verwendet.`,searchColors:`Farben durchsuchen...`,allManufacturers:`Alle Hersteller`,addNewColor:`Neue Farbe hinzufügen`,manufacturer:`Hersteller`,colorName:`Farbname`,hex:`Hex`,materialOptional:`Material (optional)`,showing:`{{filtered}} von {{total}} Farben angezeigt`,noMatch:`Keine Farben entsprechen Ihrer Suche`,empty:`Keine Farben im Katalog`,deleteColor:`Farbe löschen`,deleteConfirm:`Möchten Sie "{{name}}" wirklich löschen?`,resetCatalog:`Farbkatalog zurücksetzen`,resetConfirm:`Katalog auf Standardwerte zurücksetzen? Alle benutzerdefinierten Farben werden entfernt.`,sync:`Synchron.`,starting:`Starten...`,syncTooltip:`Von FilamentColors.xyz synchronisieren (2000+ Farben)`,loadFailed:`Farbkatalog konnte nicht geladen werden`,fieldsRequired:`Hersteller, Farbname und Hex-Farbe sind erforderlich`,colorAdded:`Farbe hinzugefügt`,addFailed:`Farbe konnte nicht hinzugefügt werden`,colorUpdated:`Farbe aktualisiert`,updateFailed:`Farbe konnte nicht aktualisiert werden`,colorDeleted:`Farbe gelöscht`,deleteFailed:`Farbe konnte nicht gelöscht werden`,resetSuccess:`Farbkatalog auf Standardwerte zurückgesetzt`,resetFailed:`Katalog konnte nicht zurückgesetzt werden`,syncUpToDate:`Bereits aktuell ({{count}} Farben geprüft)`,syncComplete:`{{added}} neue Farben hinzugefügt ({{skipped}} bereits vorhanden)`,syncError:`Sync-Fehler`,syncFailed:`Synchronisierung von FilamentColors.xyz fehlgeschlagen`,exported:`{{count}} Farben exportiert`,imported:`{{added}} Farben importiert ({{skipped}} übersprungen)`,importFailed:`Import fehlgeschlagen: ungültiges JSON-Format`,selectedCount:`{{count}} ausgewählt`,deleteSelected:`Ausgewählte löschen`,bulkDeleteConfirm:`Möchten Sie {{count}} Farben wirklich löschen?`,bulkDeleted:`{{count}} Farben gelöscht`,bulkDeleteFailed:`Fehler beim Löschen der Farben`},dateFormat:`Datumsformat`,dateFormatUs:`US (MM/TT/JJJJ)`,dateFormatEu:`EU (TT/MM/JJJJ)`,dateFormatIso:`ISO (JJJJ-MM-TT)`,timeFormat:`Zeitformat`,timeFormat12:`12-Stunden (3:30 PM)`,timeFormat24:`24-Stunden (15:30)`,defaultPrinter:`Standarddrucker`,defaultPrinterDescription:`Diesen Drucker für Uploads, Nachdrucke und andere Vorgänge vorauswählen.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Nutze das Seitenleisten-Layout, um Elemente neu anzuordnen, Sichtbarkeit zurückzusetzen und benutzerdefinierte Links zu verwalten.`,setDefault:`Standard setzen`,sidebarOrderSetDefaultHint:`Standard setzen übernimmt die aktuelle Menüreihenfolge für Benutzer, die ihre noch nicht angepasst haben.`,sidebarDefaultSet:`Standard-Menüreihenfolge wurde festgelegt.`,sidebarDefaultCleared:`Standard-Menüreihenfolge gelöscht.`,sidebarDefaultFailed:`Festlegen der Standard-Menüreihenfolge fehlgeschlagen.`,reset:`Zurücksetzen`,darkMode:`Dunkelmodus`,lightMode:`Hellmodus`,active:`(aktiv)`,background:`Hintergrund`,accent:`Akzent`,style:`Stil`,bgNeutral:`Neutral`,bgWarm:`Warm`,bgCool:`Kühl`,bgOled:`OLED Schwarz`,bgSlate:`Schieferblau`,bgForest:`Waldgrün`,accentGreen:`Grün`,accentTeal:`Türkis`,accentBlue:`Blau`,accentOrange:`Orange`,accentPurple:`Lila`,accentRed:`Rot`,styleClassic:`Klassisch`,styleGlow:`Leuchtend`,styleVibrant:`Lebendig`,themeToggleHint:`Zwischen Dunkel-, Hell- und Systemmodus mit dem Symbol in der Seitenleiste wechseln.`,progressInTitle:`Druckfortschritt im Tab`,progressInTitleDescription:`Zeigt den Prozentsatz des aktiven Drucks und einen Fortschrittsring im Browser-Tab an.`,autoArchivePrints:`Drucke automatisch archivieren`,autoArchiveDescription:`3MF-Dateien automatisch speichern, wenn Drucke abgeschlossen sind`,saveThumbnailsDescription:`Vorschaubilder aus 3MF-Dateien extrahieren und speichern`,captureFinishPhotoDescription:`Foto von der Druckerkamera aufnehmen, wenn der Druck abgeschlossen ist. Bambuddy zeichnet während des Drucks einen kurzen Zeitraffer auf, damit das Foto aus dem Moment vor dem Absenken der Druckplatte stammen kann. Die Zeitraffer-Datei bleibt erhalten, wenn du den Zeitraffer für diesen Druck aktiviert hast, andernfalls wird sie nach Aufnahme des Fotos automatisch gelöscht.`,finishPhotoRestorePlate:`Druckplatte für Abschlussfoto anheben`,finishPhotoRestorePlateDescription:`Der Drucker senkt die Druckplatte am Druckende um etwa 100 mm ab, wodurch der fertige Druck unterhalb des Kamerabildausschnitts liegt. Bambuddy hebt sie wieder bis knapp über die zuletzt gedruckte Schicht an, nimmt das Foto auf und senkt sie danach wieder ab. Wird übersprungen, wenn die Druckhöhe unbekannt ist oder ein weiterer Auftrag in der Warteschlange steht.`,ffmpegNotInstalled:`ffmpeg nicht installiert`,ffmpegRequired:`Kameraaufnahme benötigt ffmpeg. Installieren über <brew>brew install ffmpeg</brew> (macOS) oder <apt>apt install ffmpeg</apt> (Linux).`,camera:`Kamera`,cameraViewMode:`Kamera-Ansichtsmodus`,cameraOverlayDescription:`Kamera öffnet sich als größenveränderbares Overlay auf dem Hauptbildschirm`,cameraWindowDescription:`Kamera öffnet sich in einem separaten Browserfenster`,externalCamerasDescription:`Externe Kameras konfigurieren, um die eingebaute Druckerkamera zu ersetzen. Unterstützt MJPEG-Streams, RTSP, HTTP-Snapshots und USB-Kameras (V4L2). Wenn aktiviert, wird die externe Kamera für Live-Ansicht und Abschlussfotos verwendet.`,cameraPlaceholderUsb:`Gerätepfad (/dev/video0)`,cameraPlaceholderUrl:`Kamera-URL (rtsp://... oder http://...)`,cameraTypeMjpeg:`MJPEG-Stream`,cameraTypeRtsp:`RTSP-Stream`,cameraTypeSnapshot:`HTTP-Snapshot`,cameraTypeUsb:`USB-Kamera (V4L2)`,cameraSnapshotUrl:`Snapshot-URL (optional)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`URL für Einzelbildaufnahmen — wird für Benachrichtigungs-Vorschaubilder, Abschlussfotos, Schicht-Zeitraffer und Plattenerkennung verwendet. Zeitraffer und Plattenerkennung benötigen jeweils eigene drucker-spezifische Schalter — diese URL ist nur die Bildquelle, die sie verwenden, wenn sie aktiv sind. Leer lassen, um Bilder aus dem oben konfigurierten Live-Stream zu verwenden. Nützlich für go2rtc (/api/frame.jpeg) und IP-Kameras mit dediziertem Snapshot-Endpunkt.`,cameraRotation:`Drehung`,test:`Testen`,connected:`Verbunden`,disconnected:`Getrennt`,currency:`Währung`,defaultFilamentCost:`Standard-Filamentkosten (pro kg)`,electricityCost:`Stromkosten pro kWh`,energyDisplayMode:`Energieanzeige-Modus`,energyModePrintDescription:`Dashboard zeigt Summe der während Drucken verbrauchten Energie`,energyModeTotalDescription:`Dashboard zeigt Gesamtenergie der Smart Plugs`,fileManager:`Dateimanager`,createArchiveEntry:`Archiveintrag beim Drucken erstellen`,createArchiveEntryDescription:`Beim Drucken aus dem Dateimanager optional einen Archiveintrag erstellen`,lowDiskSpaceWarning:`Warnung bei wenig Speicherplatz`,lowDiskSpaceDescription:`Warnung anzeigen, wenn freier Speicherplatz unter diesen Schwellenwert fällt`,printerFirmware:`Drucker-Firmware`,checkFirmwareDescription:`Nach Firmware-Updates von Bambu Lab suchen`,bambuddySoftware:`Bambuddy-Software`,autoCheckDescription:`Automatisch beim Start nach neuen Versionen suchen`,checkNow:`Jetzt prüfen`,updateAvailableVersion:`Update verfügbar: v{{version}}`,releaseNotes:`Versionshinweise`,updateViaDocker:`Update über Docker Compose:`,composeDirectory:`Compose-Verzeichnis`,composeDirectoryHint:`Verzeichnis, in dem deine docker-compose.yml liegt. Leer lassen, um das cd wegzulassen.`,copyUpdateCommand:`Update-Befehl kopieren`,updateViaHomeAssistant:`Updates werden vom Home Assistant Supervisor verwaltet. Öffne Einstellungen → Add-ons → Bambuddy in Home Assistant, um die neue Version zu installieren.`,updateViaWindowsInstaller:`Windows-Installationen werden durch erneutes Ausführen des Installers aktualisiert. Lade die neue Version unten herunter — deine Daten, Einstellungen und Drucker bleiben erhalten.`,downloadWindowsInstaller:`Installer für v{{version}} herunterladen`,installUpdate:`Update installieren`,latestVersionRunning:`Sie verwenden die neueste Version`,failedToCheckUpdates:`Update-Prüfung fehlgeschlagen: {{error}}`,backupRestore:`Sicherung & Wiederherstellung`,backupRestoreDescription:`Einstellungen exportieren/importieren und GitHub-Backup konfigurieren`,goToBackup:`Zur Sicherung`,externalUrl:`Externe URL`,externalUrlDescription:`Die externe URL, unter der Bambuddy erreichbar ist. Wird für Benachrichtigungsbilder und externe Integrationen verwendet.`,bambuddyUrl:`Bambuddy-URL`,externalUrlHint:`Protokoll und Port angeben (z.B. http://192.168.1.100:8000)`,ftpRetry:`FTP-Wiederholung`,ftpRetryDescription:`FTP-Operationen bei unzuverlässigem Drucker-WLAN wiederholen. Gilt für 3MF-Downloads, Druck-Uploads, Zeitraffer-Downloads und Firmware-Updates.`,autoRetryDescription:`Fehlgeschlagene FTP-Operationen automatisch wiederholen`,retryAttempts:`Wiederholungsversuche`,retryDelay:`Wiederholungsverzögerung`,connectionTimeout:`Verbindungs-Timeout`,time_one:`{{count}} Mal`,time_other:`{{count}} Mal`,second_one:`{{count}} Sekunde`,second_other:`{{count}} Sekunden`,nSeconds:`{{count}} Sekunden`,increaseForWeakWifi:`Erhöhen für Drucker mit schwachem WLAN`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Mit Home Assistant verbinden, um Smart Plugs über die HA REST-API zu steuern. Unterstützt Switch-, Light-, Input_Boolean- und Script-Entitäten.`,homeAssistantUrl:`Home Assistant URL`,longLivedAccessToken:`Langlebiges Zugriffstoken`,haTokenHint:`Token in HA erstellen: Profil → Langlebige Zugriffstoken → Token erstellen`,connectionSuccessful:`Verbindung erfolgreich`,connectionFailed:`Verbindung fehlgeschlagen`,haConnectionSuccess:`Erfolgreich mit Home Assistant verbunden.`,haConnectionFailed:`Verbindung zu Home Assistant fehlgeschlagen.`,mqttPublishing:`MQTT-Veröffentlichung`,mqttDescription:`BamBuddy-Ereignisse an einen externen MQTT-Broker zur Integration mit Node-RED, Home Assistant und anderen Automatisierungssystemen veröffentlichen.`,mqttEnableDescription:`Ereignisse an externen MQTT-Broker veröffentlichen`,brokerHostname:`Broker-Hostname`,port:`Port`,usernameOptional:`Benutzername (optional)`,passwordOptional:`Passwort (optional)`,topicPrefix:`Topic-Präfix`,topicPrefixHint:`Topics werden sein: {{prefix}}/printers/<serial>/status, etc.`,prometheusMetrics:`Prometheus-Metriken`,prometheusEndpointDescription:`Druckermetriken unter <code>/api/v1/metrics</code> für Prometheus/Grafana-Überwachung bereitstellen.`,bearerTokenOptional:`Bearer-Token (optional)`,bearerTokenHint:`Wenn gesetzt, müssen Anfragen <code>Authorization: Bearer <token></code> enthalten`,metricsConnectionStatus:`Verbindungsstatus`,metricsPrinterState:`Druckerstatus (idle/printing/etc)`,metricsPrintProgress:`Druckfortschritt 0-100%`,metricsBedTemp:`Betttemperatur`,metricsNozzleTemp:`Düsentemperatur`,metricsPrintsTotal:`Gesamtdrucke nach Ergebnis`,metricsMore:`...und mehr (Schichten, Lüfter, Warteschlange, Filamentverbrauch)`,smartPlugsDescription:`Smart Plugs (Tasmota oder Home Assistant) verbinden, um Stromsteuerung zu automatisieren und Energieverbrauch für Ihre Drucker zu verfolgen.`,allOn:`Alle Ein`,allOff:`Alle Aus`,addSmartPlug:`Smart Plug hinzufügen`,energySummary:`Energieübersicht`,currentPower:`Aktuelle Leistung`,plugsOnline:`{{reachable}}/{{total}} Plugs online`,today:`Heute`,yesterday:`Gestern`,total:`Gesamt`,enablePlugsForSummary:`Plugs aktivieren, um Energieübersicht zu sehen`,addNotificationProvider:`Hinzufügen`,systemBadge:`(System)`,creating:`Erstellen...`,changing:`Ändern...`,deleteUserAndItems:`Benutzer UND dessen Elemente löschen`,deleteUserKeepItems:`Benutzer löschen, Elemente behalten (werden herrenlos)`,ok:`OK`,twoFa:{totpTitle:`Authenticator-App (TOTP)`,totpDesc:`Verwende eine Authenticator-App wie Google Authenticator, Aegis oder Authy.`,emailOtpTitle:`E-Mail OTP`,emailOtpDesc:`Sende einen Einmalcode an {{email}} beim Einloggen.`,emailOtpNoEmail:`Füge eine E-Mail-Adresse zu deinem Konto hinzu, um diese Methode zu aktivieren.`,addEmailFirst:`Dein Konto hat keine E-Mail-Adresse. Bitte einen Administrator, eine hinzuzufügen.`,setupTotp:`Authenticator-App einrichten`,setupAuthApp:`Authenticator-App einrichten`,setupInstructions:`Scanne den QR-Code mit deiner Authenticator-App und bestätige mit einem Code.`,manualEntry:`Kein Scanner? Gib dieses Secret manuell ein:`,scannedContinue:`Code gescannt — weiter`,enterCodeToConfirm:`Gib den 6-stelligen Code aus deiner Authenticator-App ein, um die Einrichtung zu bestätigen.`,activate:`Aktivieren`,disableTotp:`Authenticator deaktivieren`,disableConfirmHint:`Gib einen gültigen TOTP-Code oder einen Backup-Code ein, um den Authenticator zu deaktivieren.`,totpDisabled:`Authenticator-App deaktiviert.`,emailOtpEnabled:`E-Mail OTP aktiviert.`,emailOtpDisabled:`E-Mail OTP deaktiviert.`,smtpRequired:`Bitte konfigurieren und testen Sie zuerst die SMTP-Einstellungen.`,invalidCode:`Ungültiger Code. Bitte erneut versuchen.`,enableEmailOtp:`E-Mail OTP aktivieren`,disableEmailOtp:`E-Mail OTP deaktivieren`,emailSetupEnterCode:`Ein Bestätigungscode wurde an Ihre E-Mail-Adresse gesendet. Geben Sie ihn unten ein, um zu bestätigen, dass Ihnen dieses Postfach gehört.`,verifyAndEnable:`Verifizieren & Aktivieren`,emailDisablePasswordHint:`Geben Sie Ihr Kontopasswort ein, um die Deaktivierung des E-Mail OTP zu bestätigen.`,passwordPlaceholder:`Passwort eingeben`,backupCodesTitle:`Backup-Codes sichern`,backupCodesWarning:`Speichere diese Codes sicher. Jeder Code kann nur einmal verwendet werden und wird nicht erneut angezeigt.`,backupCodesRemaining:`{{count}} Backup-Codes verbleibend`,savedCodes:`Codes gespeichert`,regenBackup:`Backup-Codes neu generieren`,regenBackupHint:`Gib deinen aktuellen TOTP-Code ein, um 10 neue Backup-Codes zu generieren. Alle bestehenden Codes werden ungültig.`,newBackupCodes:`Neue Backup-Codes`,linkedAccounts:`Verknüpfte SSO-Konten`,linkedAccountsDesc:`Diese externen Identitätsanbieter sind mit deinem Konto verknüpft.`,oidcUnlinked:`Konto getrennt.`},sessionPolicy:{title:`Sitzungsrichtlinie`,description:`Maximale Sitzungsdauer für neue Benutzeranmeldungen. Bereits ausgegebene Token behalten ihren ursprünglichen Ablauf.`,preset24h:`24 Stunden`,preset7d:`7 Tage`,preset30d:`30 Tage`,customHoursLabel:`Individuelle Sitzungsdauer in Stunden`,hoursSuffix:`Stunden`,warning:`Längere Sitzungen reduzieren den automatischen Abmeldeschutz. Nur für vertrauenswürdige Einzelnutzer-Installationen empfohlen.`},oidc:{title:`SSO / OIDC-Anbieter`,desc:`Konfiguriere OpenID Connect-Anbieter für Single Sign-On.`,addProvider:`Anbieter hinzufügen`,newProvider:`Neuer Anbieter`,empty:`Noch keine OIDC-Anbieter konfiguriert.`,created:`Anbieter erstellt.`,updated:`Anbieter aktualisiert.`,deleted:`Anbieter gelöscht.`,refreshIcon:`Icon neu laden`,removeIcon:`Icon entfernen`,iconRefreshed:`Icon aktualisiert.`,iconRemoved:`Icon entfernt.`,iconFetchFailed:`Icon konnte von der Anbieter-URL nicht geladen werden.`,deleteTitle:`Anbieter löschen`,deleteMessage:`"{{name}}" löschen? Alle verknüpften Benutzerkonten werden getrennt.`,form:{name:`Anzeigename`,issuerUrl:`Aussteller-URL`,clientId:`Client-ID`,clientSecret:`Client-Secret`,scopes:`Bereiche`,iconUrl:`Symbol-URL (optional)`,enabled:`Aktiviert`,autoCreate:`Benutzer automatisch anlegen`,autoCreateDesc:`Erstellt beim ersten Login automatisch ein lokales Konto.`,autoLink:`Bestehende Konten automatisch verknüpfen`,autoLinkDesc:`Verknüpft beim ersten Login vorhandene lokale Konten anhand der E-Mail-Adresse.`,secretHint:`leer lassen zum Beibehalten`,secretPlaceholder:`neues Secret`,emailClaim:`E-Mail-Claim`,emailClaimDesc:`JWT-Claim für die E-Mail-Identität. Für Azure Entra ID 'preferred_username' oder 'upn' verwenden (sendet kein email_verified). Nur vertrauenswürdige Claim-Namen verwenden.`,emailClaimPlaceholder:`E-Mail`,emailClaimCustomClaimAutoLinkWarning:`Benutzerdefinierte Claims sind für die Auto-Verknüpfung nur sicher, wenn der Wert vom Mandanten verwaltet wird (z. B. Azure Entra ID upn / preferred_username). Aktiviere Auto-Verknüpfung nicht, wenn dein IdP Benutzern erlaubt, diesen Claim selbst zu setzen.`,requireEmailVerified:`E-Mail-Verifizierung erforderlich`,requireEmailVerifiedDesc:`E-Mail-Claim nur akzeptieren, wenn der Provider ihn als verifiziert markiert.`,requireEmailVerifiedWarning:`Warnung: E-Mail wird auch ohne Verifizierung akzeptiert. Nur bei vertrauenswürdigen Providern verwenden.`,requireEmailVerifiedAutoLink:`Auto-Verknüpfung zuerst deaktivieren, um diese Einstellung zu ändern.`,defaultGroup:`Standardgruppe`,defaultGroupDesc:`Gruppe, der automatisch erstellte Benutzer zugewiesen werden. Fallback auf Viewers, wenn nicht gesetzt.`,defaultGroupViewersFallback:`Viewers (Standard)`,autologin:`Automatische Anmeldung`,autologinDesc:`Nicht angemeldete Besucher direkt zu diesem Anbieter weiterleiten. Diese Option kann nur für einen Anbieter aktiv sein.`}},encryption:{title:`MFA-Verschlüsselungsstatus`,enabledFromEnv:`At-Rest-Verschlüsselung aktiv (Schlüssel aus Umgebungsvariable MFA_ENCRYPTION_KEY)`,enabledFromFile:`At-Rest-Verschlüsselung aktiv (Schlüssel aus dem Datenverzeichnis geladen)`,enabledGenerated:`At-Rest-Verschlüsselung aktiv mit automatisch generiertem Schlüssel`,notConfigured:`At-Rest-Verschlüsselung nicht konfiguriert`,notConfiguredDesc:`TOTP-Geheimnisse und OIDC-Client-Secrets werden im Klartext gespeichert. Setze MFA_ENCRYPTION_KEY oder starte Bambuddy mit beschreibbarem Datenverzeichnis neu, damit ein Schlüssel automatisch erzeugt wird.`,allEncrypted:`Alle MFA-Geheimnisse sind verschlüsselt gespeichert.`,legacyRowsLabel:`Klartext-Zeilen (Altbestand)`,encryptedRowsLabel:`Verschlüsselte Zeilen`,legacyRowsWarning:`{{count}} Klartext-Zeile(n) erkannt. Den OIDC-Provider neu speichern oder den Authenticator des Benutzers neu einrichten, um die Daten verschlüsselt abzulegen.`,backupHint:`Der automatisch erzeugte Schlüssel liegt unter DATA_DIR/.mfa_encryption_key und wird in lokalen Backup-ZIPs mitgesichert. Backups sicher aufbewahren oder MFA_ENCRYPTION_KEY explizit setzen.`,decryptionBrokenTitle:`Verschlüsselungsschlüssel fehlt`,decryptionBrokenError:`{{count}} verschlüsselte Datensätze können nicht entschlüsselt werden, weil der Schlüssel nicht mehr verfügbar ist. Den vorherigen MFA_ENCRYPTION_KEY oder DATA_DIR/.mfa_encryption_key wiederherstellen.`,migrationErrorWarning:`{{count}} Legacy-Eintrag/Einträge konnten beim Start nicht verschlüsselt werden. Prüfen Sie die Server-Logs und starten Sie Bambuddy neu.`},pipelineLimits:{title:`Slicer-Pipeline-Limits`,maxCopiesLabel:`Max. Kopien pro Lauf`,maxCopiesDesc:`Obergrenze für die Anzahl an Kopien, die Operatoren beim Ausführen einer Pipeline anfordern können. Serverseitige Obergrenze ist 1000.`},pipelines:{title:`Slicer-Pipelines`,subtitle:`Wiederverwendbare Preset-Bundles (Drucker + Prozess + Filamente + Druckplatte). Speichere eines aus dem Slice-Dialog und wende es beim nächsten Datei-Slice mit einem Klick an.`,loading:`Pipelines werden geladen…`,loadError:`Pipelines konnten nicht geladen werden.`,confirmDelete:`Diese Pipeline löschen? Das kann nicht rückgängig gemacht werden.`,staleWarning:`Eines oder mehrere referenzierte Presets existieren nicht mehr. Speichere diese Pipeline erneut aus dem Slice-Dialog, um sie zu reparieren.`,empty:{title:`Noch keine Pipelines.`,howto:`Öffne den Slice-Dialog für eine beliebige Datei, wähle Drucker / Prozess / Filamente / Druckplatte und klicke „Als Pipeline speichern“. Deine gespeicherten Pipelines erscheinen hier.`},field:{name:`Pipeline-Name`,description:`Beschreibung`,targetPrinter:`Zieldrucker`,noTarget:`— Kein Ziel —`,targetKind:`Zielart`,targetKindSpecific:`Spezifischer Drucker`,targetKindClass:`Druckerklasse`,targetModelClass:`Druckermodell`,fanoutStrategy:`Verteilungsstrategie`,fanout:{max_parallel:`Max parallel — auf alle verfügbaren passenden Drucker verteilen`,round_robin:`Reihum — durch geeignete Drucker rotieren`,fill_one_first:`Erst einen füllen — alle Kopien an einen Drucker binden`},fanoutShort:{max_parallel:`parallel`,round_robin:`Reihum`,fill_one_first:`einer zuerst`}},action:{save:`Speichern`,cancel:`Abbrechen`,rename:`Umbenennen`,delete:`Löschen`},slot:{printer:`Drucker`,process:`Prozess`,filament:`Filament`,filamentN:`Filament {{n}}`,filamentAll:`Alle {{n}} Slots`,bed:`Druckplatte`},group:{profiles:`Profile`,filaments:`Filamente`},searchPlaceholder:`Pipelines durchsuchen…`,filterTargetType:`Nach Zielart filtern`,filterTarget:`Nach Ziel filtern`,filter:{all:`Alle Ziele`,noTarget:`Kein Ziel festgelegt`,count:`{{shown}} / {{total}}`,noMatches:`Keine Pipelines entsprechen den aktuellen Filtern.`},toast:{saved:`Pipeline gespeichert`,saveFailed:`Speichern fehlgeschlagen`,deleted:`Pipeline gelöscht`,deleteFailed:`Löschen fehlgeschlagen`},noTargetHint:`Lege einen Zieldrucker fest, um diese auszuführen`,noTargetWarning:`Lege einen Zieldrucker fest, bevor du diese Pipeline ausführst.`,runs:{lastRun:`Letzter Lauf`,status:{queued:`in Warteschlange`,slicing:`wird geschnitten`,dispatching:`wird gesendet`,in_progress:`druckt`,completed:`abgeschlossen`,failed:`fehlgeschlagen`,partial_failure:`teilweise fehlgeschlagen`,cancelled:`abgebrochen`}}}},notification:{printStarted:{title:`Druck gestartet`,body:`{{printer}}: {{filename}} wird gedruckt`},printCompleted:{title:`Druck abgeschlossen`,body:`{{printer}}: {{filename}} erfolgreich abgeschlossen`},printFailed:{title:`Druck fehlgeschlagen`,body:`{{printer}}: {{filename}} ist fehlgeschlagen`},printStopped:{title:`Druck gestoppt`,body:`{{printer}}: {{filename}} wurde gestoppt`},printProgress:{title:`Druckfortschritt`,body:`{{printer}}: {{filename}} ist zu {{percent}}% abgeschlossen`},printerOffline:{title:`Drucker offline`,body:`{{printer}} ist offline`},printerError:{title:`Druckerfehler`,body:`{{printer}} – {{error}}`},filamentLow:{title:`Filament niedrig`,body:`{{printer}}: Filament geht zur Neige`},maintenanceDue:{title:`Wartung fällig`,body:`{{printer}}: {{items}} benötigen Aufmerksamkeit`}},errors:{generic:`Etwas ist schiefgelaufen`,networkError:`Netzwerkfehler. Bitte überprüfen Sie Ihre Verbindung.`,notFound:`Nicht gefunden`,unauthorized:`Nicht autorisiert`,serverError:`Serverfehler`,validationError:`Bitte überprüfen Sie Ihre Eingabe`,printerConnectionFailed:`Verbindung zum Drucker fehlgeschlagen`,saveFailed:`Speichern fehlgeschlagen`,deleteFailed:`Löschen fehlgeschlagen`,loadFailed:`Laden der Daten fehlgeschlagen`},hmsErrors:{title:`Fehler - {{name}}`,noErrors:`Keine Fehler`,viewOnWiki:`Im Bambu Lab Wiki ansehen`,mqttVerifyFailedRemedy:`Aktiviere den Entwicklermodus am Drucker, starte den Drucker neu und starte den Auftrag dann erneut.`,unknownCode:`Unbekannter HMS-Code — Details siehe Bambu Lab Wiki.`,clearInstructions:`Löschen Sie die Fehler am Drucker, um sie hier zu entfernen.`,clearErrors:`Fehler löschen`,clearSuccess:`HMS-Fehler gelöscht`,clearFailed:`HMS-Fehler konnten nicht gelöscht werden`,actionSuccess:`Aktion an Drucker gesendet`,actionFailed:`Aktion konnte nicht gesendet werden`,runoutExpectedSlot:`Das Filament in {{ranOut}} ist aufgebraucht. Der Drucker wartet jetzt auf kompatibles Filament in {{expected}}. Legen Sie eine Spule in {{expected}} ein und wählen Sie dann Wiederholen.`,runoutExpectedSlotOnly:`Der Drucker wartet auf kompatibles Filament in {{expected}}. Legen Sie dort eine Spule ein und wählen Sie dann Wiederholen.`,runoutSlotUnknown:`Das Filament ist aufgebraucht und der Druck ist pausiert. Bambuddy konnte nicht ermitteln, welchen Slot der Drucker jetzt erwartet — prüfen Sie am Druckerdisplay, welcher Slot angefordert wird.`,actions:{RESUME_PRINTING:`Druck fortsetzen`,RESUME_PRINTING_DEFECTS:`Fortsetzen (Mängel akzeptabel)`,RESUME_PRINTING_PROBELM_SOLVED:`Fortsetzen (Problem gelöst)`,STOP_PRINTING:`Druck stoppen`,CHECK_ASSISTANT:`Assistent öffnen`,FILAMENT_EXTRUDED:`Filament extrudiert, weiter`,RETRY_FILAMENT_EXTRUDED:`Noch nicht extrudiert, erneut`,CONTINUE:`Fertig, weiter`,LOAD_VIRTUAL_TRAY:`Filament laden`,OK_BUTTON:`OK`,FILAMENT_LOAD_RESUME:`Filament geladen, fortsetzen`,JUMP_TO_LIVEVIEW:`Live-Ansicht öffnen`,NO_REMINDER_NEXT_TIME:`Nicht mehr erinnern`,REFRESH_NOZZLE:`Erneut prüfen`,IGNORE_NO_REMINDER_NEXT_TIME:`Ignorieren und nicht mehr erinnern`,IGNORE_RESUME:`Ignorieren und fortsetzen`,PROBLEM_SOLVED_RESUME:`Problem gelöst, fortsetzen`,TURN_OFF_FIRE_ALARM:`Verstanden, Brandalarm ausschalten`,RETRY_PROBLEM_SOLVED:`Erneut versuchen (Problem gelöst)`,CANCLE:`Abbrechen`,STOP_DRYING:`Trocknen stoppen`,PROCEED:`Fortfahren`,OK_JUMP_RACK:`OK`,ABORT:`Abbrechen`,DISABLE_PURIFICATION:`Luftreinigung für diesen Druck deaktivieren`,DONT_REMIND_NEXT_TIME:`Nicht mehr erinnern`,DBL_CHECK_CANCEL:`Abbrechen`,DBL_CHECK_DONE:`Fertig`,DBL_CHECK_RETRY:`Erneut versuchen`,DBL_CHECK_RESUME:`Fortsetzen`,DBL_CHECK_OK:`Bestätigen`,REMOVE_CLOSE_BTN:`Schließen`}},mqttDebug:{title:`MQTT-Debug-Protokoll`,searchPlaceholder:`Topic oder Payload suchen...`,noMessages:`Noch keine Nachrichten protokolliert`,startLoggingHint:`Klicken Sie auf "Protokollierung starten", um MQTT-Nachrichten aufzuzeichnen`,noMessagesMatch:`Keine Nachrichten entsprechen Ihrem Filter`,adjustFilterHint:`Versuchen Sie, Ihre Such- oder Filterkriterien anzupassen`,incoming:`Eingehend`,outgoing:`Ausgehend`,loggingStopped:`Protokollierung gestoppt`,loggingActive:`Protokollierung aktiv - Nachrichten werden automatisch aktualisiert`,startLogging:`Protokollierung starten`,stopLogging:`Protokollierung stoppen`,clearLog:`Protokoll löschen`,topic:`Thema`,timestamp:`Zeitstempel`,direction:`Richtung`,all:`Alle`},printerFiles:{zipStarted_one:`ZIP-Download für {{count}} Datei gestartet`,zipStarted_other:`ZIP-Download für {{count}} Dateien gestartet`,zipPartial:`ZIP-Download mit {{successful}} von {{total}} Dateien gestartet; die übrigen konnten nicht abgerufen werden`,downloadFailed:`Download fehlgeschlagen: {{error}}`,unknownError:`Unbekannter Fehler`,shiftSelectHint:`Umschalttaste gedrückt halten, um einen Bereich auszuwählen`,selectFile:`{{name}} auswählen`,deselectFile:`Auswahl von {{name}} aufheben`,title:`Dateimanager`,storageUsed:`Belegt:`,storageFree:`Frei:`,filterPlaceholder:`Dateien filtern...`,deleteButton:`Löschen`,deleteFiles:`{{count}} Dateien löschen`,deleteFileConfirm:`"{{name}}" löschen? Dies kann nicht rückgängig gemacht werden.`,deleteFilesConfirm:`{{count}} ausgewählte Dateien löschen? Dies kann nicht rückgängig gemacht werden.`,noFiles:`Keine Dateien auf dem Drucker`,printerUnavailable:`Der Dateidienst des Druckers ist nicht erreichbar. Versuchen Sie es erneut, wenn der Drucker verfügbar ist.`,loadingFiles:`Dateien werden geladen...`,failedToLoad:`Dateien konnten nicht geladen werden`,toast:{filesDeleted:`{{count}} Datei(en) gelöscht`,deleteFailed:`Löschen fehlgeschlagen: {{error}}`}},confirm:{delete:`Möchten Sie dies wirklich löschen?`,unsavedChanges:`Sie haben ungespeicherte Änderungen. Möchten Sie wirklich verlassen?`,clearQueue:`Möchten Sie die Warteschlange wirklich leeren?`},login:{title:`Bambuddy Anmeldung`,subtitle:`Melden Sie sich bei Ihrem Konto an`,username:`Benutzername`,usernamePlaceholder:`Benutzername eingeben`,usernameOrEmail:`Benutzername oder E-Mail`,usernameOrEmailPlaceholder:`Benutzername oder @ E-Mail`,password:`Passwort`,passwordPlaceholder:`Passwort eingeben`,signIn:`Anmelden`,signingIn:`Anmeldung läuft...`,rememberMe:`Angemeldet bleiben`,forgotPassword:`Passwort vergessen?`,autologinFailed:`Automatische SSO-Anmeldung fehlgeschlagen. Bitte wählen Sie unten einen Anbieter.`,localDisabledNotice:`Lokale Anmeldung ist deaktiviert. Bitte verwenden Sie einen der SSO-Anbieter unten.`,loginSuccess:`Erfolgreich angemeldet`,loginFailed:`Anmeldung fehlgeschlagen`,enterCredentials:`Bitte Benutzername und Passwort eingeben`,enterEmail:`Bitte geben Sie Ihre E-Mail-Adresse ein`,oidcLoginFailed:`OIDC-Anmeldung fehlgeschlagen`,oidcErrors:{providerError:`Der Identity-Provider hat einen Fehler zurückgegeben`,missingParameters:`Dem OIDC-Callback fehlen erforderliche Parameter`,invalidState:`OIDC-State ist ungültig oder wurde bereits verwendet`,stateExpired:`OIDC-Sitzung abgelaufen — bitte erneut versuchen`,providerNotFound:`OIDC-Provider nicht gefunden`,discoveryFailed:`OIDC-Discovery-Dokument konnte nicht abgerufen werden`,invalidDiscovery:`OIDC-Discovery-Dokument ist ungültig`,networkError:`Netzwerkfehler beim OIDC-Token-Austausch`,badResponse:`Unerwartete Antwort beim OIDC-Token-Austausch`,noIdToken:`OIDC-Provider hat kein ID-Token zurückgegeben`,validationFailed:`OIDC-Token-Validierung fehlgeschlagen`,nonceMismatch:`OIDC-Nonce stimmt nicht überein — möglicher Replay-Angriff`,missingSubClaim:`OIDC-Token enthält keinen Sub-Claim`,noLinkedAccount:`Kein lokales Konto mit dieser OIDC-Identität verknüpft`,accountInactive:`Ihr Konto ist inaktiv`,userResolutionFailed:`Ihr Konto konnte nicht aufgelöst werden`,internalError:`Interner Fehler beim OIDC-Login`,tokenExchangeFailed:`OIDC-Token-Austausch fehlgeschlagen`},forgotPasswordTitle:`Passwort vergessen`,forgotPasswordMessage:`Wenn Sie Ihr Passwort vergessen haben, wenden Sie sich bitte an Ihren Systemadministrator.`,forgotPasswordEmailMessage:`Geben Sie Ihre E-Mail-Adresse ein und wir senden Ihnen ein neues Passwort.`,emailAddress:`E-Mail-Adresse`,emailPlaceholder:`ihre.email@beispiel.de`,cancel:`Abbrechen`,sending:`Wird gesendet...`,sendResetEmail:`Zurücksetzungs-E-Mail senden`,howToReset:`So setzen Sie Ihr Passwort zurück:`,resetStep1:`Kontaktieren Sie Ihren Bambuddy-Administrator`,resetStep2:`Bitten Sie ihn, Ihr Passwort in der Benutzerverwaltung zurückzusetzen`,resetStep3:`Er kann ein neues temporäres Passwort für Sie festlegen`,resetStep4:`Melden Sie sich mit dem neuen Passwort an und ändern Sie es in den Einstellungen`,gotIt:`Verstanden`,resetPassword:{title:`Neues Passwort festlegen`,subtitle:`Geben Sie unten Ihr neues Passwort ein und bestätigen Sie es.`,newPassword:`Neues Passwort`,newPasswordPlaceholder:`Mindestens 8 Zeichen`,confirmPassword:`Passwort bestätigen`,confirmPasswordPlaceholder:`Neues Passwort wiederholen`,saving:`Wird gespeichert…`,submit:`Neues Passwort festlegen`,backToLogin:`Zurück zur Anmeldung`,passwordsDoNotMatch:`Passwörter stimmen nicht überein`,passwordTooShort:`Passwort muss mindestens 8 Zeichen lang sein`,resetFailed:`Passwort zurücksetzen fehlgeschlagen. Der Link ist möglicherweise abgelaufen.`},twoFA:{title:`Zwei-Faktor-Authentifizierung`,subtitle:`Ihr Konto ist mit 2FA geschützt. Geben Sie unten den Bestätigungscode ein.`,methodAuthenticator:`Authenticator-App`,methodEmail:`E-Mail-Code`,methodBackup:`Wiederherstellungscode`,instructionsTotp:`Öffnen Sie Ihre Authenticator-App und geben Sie den 6-stelligen Code für Bambuddy ein.`,instructionsEmail:`Ein 6-stelliger Code wurde an Ihre E-Mail-Adresse gesendet. Er ist 10 Minuten gültig.`,instructionsEmailNotSent:`Klicken Sie unten, um einen Bestätigungscode per E-Mail zu erhalten.`,instructionsBackup:`Geben Sie einen Ihrer 8-stelligen Wiederherstellungscodes ein. Jeder Code kann nur einmal verwendet werden.`,sendCodeButton:`Code per E-Mail senden`,sendingCode:`Wird gesendet...`,resendCode:`Code erneut senden`,codeLabel:`Bestätigungscode`,backupCodeLabel:`Wiederherstellungscode`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Bestätigen`,verifyingButton:`Wird überprüft...`,backToLogin:`← Zurück zur Anmeldung`,orContinueWith:`oder anmelden mit`,signInWith:`Anmelden mit {{provider}}`,enterCode:`Bitte geben Sie den Bestätigungscode ein`,sendCodeFailed:`Bestätigungscode konnte nicht gesendet werden`,invalidCode:`Ungültiger Code. Bitte erneut versuchen.`}},setup:{title:`Bambuddy Einrichtung`,subtitle:`Konfigurieren Sie die Authentifizierung für Ihre Bambuddy-Instanz`,enableAuth:`Authentifizierung aktivieren`,adminAccount:`Admin-Konto`,adminAccountDesc:`Wenn bereits Admin-Benutzer existieren, wird die Authentifizierung mit den vorhandenen Admin-Konten aktiviert. Lassen Sie die Felder unten leer, um vorhandene Admins zu verwenden, oder geben Sie neue Anmeldedaten ein, um einen neuen Admin-Benutzer zu erstellen.`,adminUsername:`Admin-Benutzername`,adminPassword:`Admin-Passwort`,optionalIfAdminExists:`(optional, wenn Admin-Benutzer existieren)`,adminUsernamePlaceholder:`Admin-Benutzernamen eingeben (optional)`,adminPasswordPlaceholder:`Admin-Passwort eingeben (optional)`,confirmPassword:`Passwort bestätigen`,confirmPasswordPlaceholder:`Admin-Passwort bestätigen`,settingUp:`Einrichtung läuft...`,completeSetup:`Einrichtung abschließen`,toast:{authEnabledAdminCreated:`Authentifizierung aktiviert und Admin-Benutzer erstellt`,authEnabledExistingAdmins:`Authentifizierung mit vorhandenen Admin-Benutzern aktiviert`,setupCompleted:`Einrichtung abgeschlossen`,enterBothCredentials:`Bitte geben Sie sowohl Admin-Benutzernamen als auch Passwort ein, oder lassen Sie beide leer, um vorhandene Admin-Benutzer zu verwenden`,passwordsDoNotMatch:`Passwörter stimmen nicht überein`,passwordTooShort:`Passwort muss mindestens 6 Zeichen lang sein`}},changePassword:{title:`Passwort ändern`,currentPassword:`Aktuelles Passwort`,currentPasswordPlaceholder:`Aktuelles Passwort eingeben`,newPassword:`Neues Passwort`,newPasswordPlaceholder:`Neues Passwort eingeben (min. 6 Zeichen)`,confirmPassword:`Neues Passwort bestätigen`,confirmPasswordPlaceholder:`Neues Passwort bestätigen`,passwordsDoNotMatch:`Passwörter stimmen nicht überein`,passwordTooShort:`Passwort muss mindestens 6 Zeichen lang sein`,changing:`Wird geändert...`,success:`Passwort erfolgreich geändert`,failed:`Passwortänderung fehlgeschlagen`},plateAlert:{title:`Druck pausiert!`,message:`Objekte auf dem Druckbett erkannt. Der Druck wurde automatisch pausiert. Bitte räumen Sie das Druckbett und setzen Sie den Druck fort.`,understand:`Verstanden`},camera:{title:`Kameraansicht`,invalidPrinterId:`Ungültige Drucker-ID`,live:`Live`,snapshot:`Schnappschuss`,restartStream:`Stream neu starten`,refreshSnapshot:`Schnappschuss aktualisieren`,fullscreen:`Vollbild`,exitFullscreen:`Vollbild beenden`,connectingToCamera:`Verbinde mit Kamera...`,capturingSnapshot:`Schnappschuss wird aufgenommen...`,connectionLost:`Verbindung verloren`,connectionFailed:`Kameraverbindung fehlgeschlagen`,reconnecting:`Neuverbindung in {{countdown}}s... (Versuch {{attempt}}/{{max}})`,reconnectNow:`Jetzt verbinden`,cameraUnavailable:`Kamera nicht verfügbar`,cameraUnavailableDesc:`Stellen Sie sicher, dass der Drucker eingeschaltet und verbunden ist.`,noCamera:`Keine Kamera verfügbar`,retry:`Erneut versuchen`,cameraStream:`Kamera-Stream`,zoomOut:`Verkleinern`,zoomIn:`Vergrößern`,resetZoom:`Zoom zurücksetzen`,recording:`Aufnahme`,startRecording:`Aufnahme starten`,stopRecording:`Aufnahme stoppen`,chamberLight:`Kammerbeleuchtung umschalten`,unavailable:`Kamera nicht verfügbar`,diagnose:{button:`Diagnose`,modalTitle:`Kamera-Diagnose`,running:`Diagnose läuft...`,runFailed:`Diagnose konnte nicht ausgeführt werden: {{error}}`,retry:`Erneut ausführen`,stage:{tcp_reachable:`Netzwerk-Erreichbarkeit`,first_frame:`Bilderfassung`,live_stream_active:`Live-Stream aktiv`},summary:{all_ok:`Kamera funktioniert. Die Diagnose hat alle Phasen erfolgreich abgeschlossen.`,live_stream_active_healthy:`Kamera streamt gerade mit aktuellen Bildern — kein Test nötig.`,printer_unreachable:`Drucker ist nicht erreichbar. Prüfe IP-Adresse, Netzwerkverbindung und ob der Drucker eingeschaltet ist.`,camera_port_closed:`Drucker ist erreichbar, aber der Kamera-Port ist geschlossen. Stelle sicher, dass LAN-Modus und Entwicklermodus in den Druckereinstellungen aktiviert sind.`,no_frame:`Verbindung zur Kamera hergestellt, aber keine Bilder empfangen. Versuche es erneut oder prüfe, ob die Kamera in den Druckereinstellungen aktiviert ist.`,unknown_failure:`Kamera-Diagnose aus unbekanntem Grund fehlgeschlagen. Prüfe das Support-Log für Details.`},meta:{protocol:`Protokoll`,port:`Port`,profile:`Profil`}}},groups:{title:`Gruppenverwaltung`,subtitle:`Berechtigungsgruppen für Zugriffskontrolle verwalten`,backToSettings:`Zurück zu Einstellungen`,createGroup:`Gruppe erstellen`,noPermission:`Sie haben keine Berechtigung, auf diese Seite zuzugreifen.`,system:`System`,noDescription:`Keine Beschreibung`,usersCount:`{{count}} Benutzer`,permissionsCount:`{{count}} Berechtigungen`,edit:`Bearbeiten`,delete:`Löschen`,toast:{created:`Gruppe erfolgreich erstellt`,updated:`Gruppe erfolgreich aktualisiert`,deleted:`Gruppe erfolgreich gelöscht`,enterGroupName:`Bitte geben Sie einen Gruppennamen ein`},modal:{editGroup:`Gruppe bearbeiten`,createGroup:`Gruppe erstellen`,cancel:`Abbrechen`,saving:`Speichern...`,creating:`Erstellen...`,saveChanges:`Änderungen speichern`},form:{groupName:`Gruppenname`,groupNamePlaceholder:`Gruppennamen eingeben`,systemGroupWarning:`Systemgruppennamen können nicht geändert werden`,description:`Beschreibung`,descriptionPlaceholder:`Beschreibung eingeben (optional)`,permissions:`Berechtigungen ({{count}} ausgewählt)`},deleteModal:{title:`Gruppe löschen`,message:`Sind Sie sicher, dass Sie diese Gruppe löschen möchten? Benutzer in dieser Gruppe verlieren diese Berechtigungen.`,confirm:`Gruppe löschen`},editor:{title:`Gruppe bearbeiten`,createTitle:`Gruppe erstellen`,search:`Berechtigungen suchen...`,selectAll:`Alle auswählen`,clearAll:`Alle abwählen`,permissionsSelected:`{{count}} ausgewählt`,noResults:`Keine Berechtigungen entsprechen Ihrer Suche`,websocketHint:`Erforderlich für Live-Aktualisierungen. Ohne diese Berechtigung greift die Oberfläche auf regelmäßiges Abrufen zurück.`}},users:{title:`Benutzerverwaltung`,subtitle:`Benutzer und deren Zugriff auf Ihre Bambuddy-Instanz verwalten`,backToSettings:`Zurück zu Einstellungen`,createUser:`Benutzer erstellen`,noPermission:`Sie haben keine Berechtigung, auf diese Seite zuzugreifen.`,admin:`Admin`,noGroups:`Keine Gruppen`,active:`Aktiv`,inactive:`Inaktiv`,edit:`Bearbeiten`,delete:`Löschen`,system:`System`,noGroupsAvailable:`Keine Gruppen verfügbar`,table:{username:`Benutzername`,groups:`Gruppen`,status:`Status`,actions:`Aktionen`},toast:{created:`Benutzer erfolgreich erstellt`,updated:`Benutzer erfolgreich aktualisiert`,deleted:`Benutzer erfolgreich gelöscht`,fillRequired:`Bitte füllen Sie alle Pflichtfelder aus`,passwordsDoNotMatch:`Passwörter stimmen nicht überein`,passwordTooShort:`Passwort muss mindestens 6 Zeichen lang sein`,ldapProvisioned:`LDAP-Benutzer „{{username}}" bereitgestellt`},modal:{createUser:`Benutzer erstellen`,editUser:`Benutzer bearbeiten`,cancel:`Abbrechen`,creating:`Erstellen...`,saving:`Speichern...`,saveChanges:`Änderungen speichern`,advancedAuthSubtitle:`mit erweiterter Authentifizierung`,tabsAriaLabel:`Benutzerquelle`,localTab:`Lokal`,ldapTab:`LDAP`,ldapSearchLabel:`Verzeichnis durchsuchen`,ldapSearchPlaceholder:`Benutzername, Name oder E-Mail eingeben...`,ldapMinChars:`Mindestens 2 Zeichen für die Suche eingeben`,ldapTypeToSearch:`Tippen, um das LDAP-Verzeichnis zu durchsuchen`,ldapSearching:`Verzeichnis wird durchsucht...`,ldapNoResults:`Keine passenden Benutzer im Verzeichnis`,ldapSearchError:`Verzeichnissuche fehlgeschlagen. Bitte LDAP-Server-Status prüfen.`,ldapAlreadyProvisioned:`Bereits bereitgestellt`,ldapSelectedLabel:`Ausgewählt`,ldapProvision:`Benutzer bereitstellen`,ldapProvisioning:`Wird bereitgestellt...`,ldapErrorProvision:`Bereitstellung fehlgeschlagen. Bitte LDAP-Server-Status prüfen und erneut versuchen.`},form:{username:`Benutzername`,usernamePlaceholder:`Benutzernamen eingeben`,email:`E-Mail`,emailPlaceholder:`benutzer@beispiel.de`,password:`Passwort`,passwordPlaceholder:`Passwort eingeben`,confirmPassword:`Passwort bestätigen`,confirmPasswordPlaceholder:`Passwort bestätigen`,newPasswordPlaceholder:`Neues Passwort eingeben`,confirmNewPasswordPlaceholder:`Neues Passwort bestätigen`,leaveBlankToKeep:`leer lassen, um das aktuelle zu behalten`,groups:`Gruppen`,optional:`optional`,autoGeneratedPassword:`Ein sicheres Passwort wird automatisch generiert und per E-Mail an den Benutzer gesendet.`,passwordManagedByAdvancedAuth:`Das Passwort wird durch erweiterte Authentifizierung verwaltet. Verwenden Sie "Passwort zurücksetzen", um ein neues Passwort per E-Mail an den Benutzer zu senden.`,resetPassword:`Passwort zurücksetzen`,resettingPassword:`Passwort wird zurückgesetzt...`},deleteModal:{title:`Benutzer löschen`,message:`Sind Sie sicher, dass Sie diesen Benutzer löschen möchten? Diese Aktion kann nicht rückgängig gemacht werden.`,confirm:`Benutzer löschen`}},streamOverlay:{title:`Stream-Overlay`,invalidPrinterId:`Ungültige Drucker-ID`,cameraStream:`Kamera-Stream`,progress:`Fortschritt`,eta:`ETA`,printerIdle:`Drucker ist inaktiv`,printerOffline:`Drucker offline`,builder:{title:`Stream-Overlay`,description:`Erstellt die URL für ein Stream-Overlay — eine bildschirmfüllende Kameraansicht mit eingeblendeten Live-Druckdaten, für OBS, ein Wanddisplay oder jede andere Browserquelle. Felder auswählen und URL kopieren.`,printer:`Drucker`,size:`Textgröße`,sizeSmall:`Klein`,sizeMedium:`Mittel`,sizeLarge:`Groß`,fps:`Bildrate`,fpsHint:`A1- und P1-Kameras liefern höchstens etwa 5 Bilder pro Sekunde, unabhängig vom eingestellten Wert.`,token:`Stream-Overlay-Token (optional)`,tokenHint:`Nur nötig, wenn die Anmeldung aktiviert ist: OBS hat keine eigene Sitzung. Oben eines mit dem Bereich Stream-Overlay erstellen.`,tokenWarning:`Diese URL enthält ein Token — wer sie lesen kann, sieht den Stream und den Dateinamen. Token widerrufen, um den Zugriff zu beenden.`,fields:`Anzuzeigende Felder`,fieldPrinter:`Druckername`,fieldFilename:`Dateiname`,fieldStatus:`Status`,fieldProgress:`Fortschrittsbalken`,fieldLayers:`Schichtanzahl`,fieldEta:`Restzeit und ETA`,fieldCamera:`Kamerabild`,chamberHint:`Die Kammertemperatur erscheint nur bei Modellen mit echtem Kammersensor — P1- und A1-Drucker melden einen bedeutungslosen Wert und lassen sie deshalb weg.`,urlTitle:`Overlay-URL`,open:`Öffnen`,showPreview:`Vorschau anzeigen`,hidePreview:`Vorschau ausblenden`,previewTitle:`Overlay-Vorschau`},status:{printing:`Druckt`,paused:`Pausiert`,finished:`Fertig`,failed:`Fehlgeschlagen`,idle:`Inaktiv`,unknown:`Unbekannt`}},profiles:{title:`Profile`,subtitle:`Verwalten Sie Ihre Slicer-Voreinstellungen und Druckvorschub-Kalibrierungen`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Lokale Profile`,kprofiles:`K-Profile`},orcaCloud:{connectedAs:`Verbunden als`,connectedShort:`Mit Orca Cloud verbunden`,logout:`Trennen`,noLogoutPermission:`Sie haben keine Berechtigung zum Trennen`,noConnectPermission:`Sie haben keine Berechtigung, sich mit Orca Cloud zu verbinden`,retry:`Erneut versuchen`,connectButton:`Orca Cloud verbinden`,connect:{title:`Mit Orca Cloud verbinden`,description:`Melden Sie sich bei Ihrem Orca Cloud-Konto an, um Ihre Slicer-Profile in Bambuddy zu synchronisieren.`},device:{title:`Bambuddy in Orca Cloud genehmigen`,instruction:`Öffnen Sie Orca Cloud und genehmigen Sie diesen Code. Bambuddy verbindet sich automatisch, sobald Sie genehmigt haben.`,codeLabel:`Ihr Kopplungscode`,openButton:`Orca Cloud-Genehmigungsseite öffnen`,manualHint:`Oder gehen Sie zu {{url}} und geben Sie den obigen Code ein.`,waiting:`Warte auf Ihre Genehmigung…`,cancel:`Abbrechen`},profiles:{title:`Ihre Orca Cloud-Profile ({{count}})`,refresh:`Aktualisieren`,empty:`Noch keine Profile in Ihrem Orca Cloud-Konto gefunden.`},toast:{disconnected:`Verbindung zu Orca Cloud getrennt`},errors:{startFailed:`Anmeldevorgang für Orca Cloud konnte nicht gestartet werden.`,denied:`Die Kopplung wurde in Orca Cloud abgelehnt.`,expired:`Der Kopplungscode ist abgelaufen. Klicken Sie auf Verbinden, um es erneut zu versuchen.`,pollFailed:`Die Verbindung ging beim Warten auf die Genehmigung verloren. Bitte versuchen Sie es erneut.`}},localProfiles:{title:`Lokale Profile`,subtitle:`Slicer-Voreinstellungen aus OrcaSlicer importieren und verwalten`,import:`Profile importieren`,importDesc:`.bbscfg-, .bbsflmt-, .orca_filament-, .zip- oder .json-Dateien hier ablegen`,importing:`Importiere...`,search:`Lokale Voreinstellungen durchsuchen...`,noPresets:`Noch keine lokalen Voreinstellungen`,noSearchResults:`Keine Voreinstellungen entsprechen deiner Suche`,badge:`Lokal`,edit:`Bearbeiten`,delete:`Löschen`,cancel:`Abbrechen`,deleteConfirmTitle:`Voreinstellung löschen`,deleteConfirm:`Möchten Sie diese Voreinstellung wirklich löschen? Dies kann nicht rückgängig gemacht werden.`,source:`Quelle`,inheritsFrom:`Erbt von`,filamentType:`Typ`,vendor:`Hersteller`,compatiblePrinters:`Drucker`,nozzleTemp:`Düsentemperatur`,cost:`Kosten`,density:`Dichte`,pressureAdvance:`Druckvorschub`,filament:`Filament`,process:`Prozess`,printer:`Drucker`,toast:{importSuccess:`{{count}} Voreinstellung(en) importiert`,importSkipped:`{{count}} Voreinstellung(en) übersprungen (Duplikate)`,importError:`{{count}} Fehler beim Import`,deleted:`Voreinstellung gelöscht`,updated:`Voreinstellung aktualisiert`}},connectedAs:`Verbunden als`,signInExpiredTitle:`Bambu-Cloud-Anmeldung abgelaufen`,signInExpiredBody:`Bambu Lab akzeptiert das gespeicherte Token nicht mehr. Melden Sie sich erneut an, um Cloud-Profile, MakerWorld-Importe und Firmware-Prüfungen wiederherzustellen.`,logout:`Abmelden`,noLogoutPermission:`Sie haben keine Berechtigung zum Abmelden`,failedToLoad:`Profile konnten nicht geladen werden`,retry:`Erneut versuchen`,time:{justNow:`Gerade eben`,minsAgo:`vor {{count}}m`,hoursAgo:`vor {{count}}h`,daysAgo:`vor {{count}}d`},toast:{loggedOut:`Abgemeldet`},login:{title:`Mit Bambu Cloud verbinden`,subtitle:`Synchronisieren Sie Ihre Slicer-Voreinstellungen geräteübergreifend`,email:`E-Mail`,password:`Passwort`,region:`Region`,regionGlobal:`Global`,regionChina:`China`,verificationCode:`Bestätigungscode`,totpCode:`Authenticator-Code`,checkEmail:`Prüfen Sie Ihre E-Mail ({{email}}) für einen 6-stelligen Code`,enterTotpHint:`Geben Sie den 6-stelligen Code aus Ihrer Authenticator-App ein`,accessToken:`Zugriffstoken`,accessTokenHint:`Fügen Sie Ihr Bambu-Cloud-Zugriffstoken ein. Konten der Region China müssen diesen Weg nutzen (telefonnummerngebunden — kein E-Mail-Login). Im Wiki steht, wie Sie das Token aus den MakerWorld-Cookies auslesen.`,back:`Zurück`,loginButton:`Anmelden`,verifyButton:`Bestätigen`,setTokenButton:`Token setzen`,useToken:`Stattdessen Zugriffstoken verwenden`,captchaTitle:`Bambu Cloud verlangt ein CAPTCHA`,captchaBody:`Bambu fordert für dein Netzwerk eine CAPTCHA-Prüfung, bevor eine Anmeldung akzeptiert wird, und diese Prüfung lässt sich aus Bambuddy heraus nicht beantworten. E-Mail und Passwort sind nicht das Problem. Die Sperre hängt an deiner öffentlichen IP-Adresse und löst sich normalerweise innerhalb weniger Stunden von selbst — wiederholte Versuche verlängern sie. Um dich jetzt anzumelden, verwende stattdessen ein Zugriffstoken aus einer Browser-Sitzung.`,useEmail:`Stattdessen mit E-Mail anmelden`,toast:{loggedIn:`Erfolgreich angemeldet`,codeSent:`Bestätigungscode an Ihre E-Mail gesendet`,enterTotp:`Geben Sie den Code aus Ihrer Authenticator-App ein`,tokenSet:`Token erfolgreich gesetzt`}},presets:{myPreset:`Mein Profil (bearbeitbar)`,duplicate:`Duplizieren`,editable:`Bearbeitbar`,failedToLoadDetails:`Profil-Details konnten nicht geladen werden`,deleteConfirm:`Dieses Profil löschen?`,deleteWarning:`"{{name}}" wird dauerhaft aus Bambu Cloud gelöscht. Dies kann nicht rückgängig gemacht werden.`,noDuplicatePermission:`Sie haben keine Berechtigung zum Duplizieren von Profilen`,noEditPermission:`Sie haben keine Berechtigung zum Bearbeiten von Profilen`,noDeletePermission:`Sie haben keine Berechtigung zum Löschen von Profilen`,types:{filament:`Filament-Profil`,printer:`Drucker-Profil`,process:`Prozess-Profil`},toast:{deleted:`Profil gelöscht`,created:`Profil erstellt`,updated:`Profil aktualisiert`,duplicated:`Profil dupliziert`,fieldAdded:`Feld "{{key}}" hinzugefügt`,exported:`Profil exportiert`},baseLabel:`Basis: {{name}}`,currentLabel:`Aktuell: {{name}}`,newPreset:`Neues Profil`,editPreset:`Profil bearbeiten`,duplicatePreset:`Profil duplizieren`,createNewPreset:`Neues Profil erstellen`,customizeSettings:`Passen Sie die Einstellungen für Ihr neues Profil an`,compareWithBase:`Mit Basis-Profil vergleichen`,compare:`Vergleichen`,basePreset:`Basis-Profil`,selectBasePreset:`Basis-Profil auswählen...`,presetName:`Profilname`,myCustomPreset:`Mein eigenes Profil`,inheritsFrom:`Erbt von`,dropJsonToImport:`JSON zum Importieren ablegen`,tabs:{common:`Allgemein`,allFields:`Alle Felder`},availableFields:`Verfügbare Felder`,searchFieldsPlaceholder:`Felder suchen...`,noMatchingFields:`Keine passenden Felder`,allFieldsAdded:`Alle Felder hinzugefügt`,addCustomField:`Eigenes Feld hinzufügen`,yourOverrides:`Ihre Überschreibungen`,noOverridesYet:`Noch keine Überschreibungen`,clickFieldsToAdd:`Klicken Sie links auf Felder, um sie hinzuzufügen`,saveAsTemplate:`Als Vorlage speichern`,jsonTip:`Tipp: Ziehen Sie eine .json-Datei auf dieses Fenster, um Einstellungen zu importieren`},cloudView:{searchPlaceholder:`Profile suchen...`,templates:`Vorlagen`,refresh:`Aktualisieren`,newPreset:`Neues Profil`,clearFilters:`Filter zurücksetzen`,compareMode:`Vergleichsmodus`,selectAnotherPreset:`Wählen Sie ein weiteres {{type}}-Profil`,clickTwoPresets:`Klicken Sie auf zwei Profile des gleichen Typs zum Vergleichen`,selectFirst:`1. Erstes auswählen`,selectSecond:`2. Zweites auswählen`,compareNow:`Jetzt vergleichen`,lastSynced:`Zuletzt synchronisiert:`,showingCount:`{{showing}} von {{total}} Profilen`,noPresetsFound:`Keine Profile gefunden`,columns:{filament:`Filament`,process:`Prozess`,printer:`Drucker`},noFilamentPresets:`Keine Filament-Profile`,noProcessPresets:`Keine Prozess-Profile`,noPrinterPresets:`Keine Drucker-Profile`,filters:{type:`Typ`,owner:`Besitzer`,printer:`Drucker`,nozzle:`Düse`,filament:`Filament`,layer:`Schicht`,all:`Alle`,myPresets:`Meine Profile`,builtIn:`Voreingestellt`,process:`Prozess`},noTemplatesPermission:`Sie haben keine Berechtigung, Vorlagen zu verwalten`,noRefreshPermission:`Sie haben keine Berechtigung, Profile zu aktualisieren`,noCreatePermission:`Sie haben keine Berechtigung, Profile zu erstellen`},templates:{title:`Schnellvorlagen`,noTemplates:`Noch keine Vorlagen`,createFirst:`Erstellen Sie Vorlagen aus dem Preset-Editor`,typeFilter:`Typ:`,deleteTitle:`Vorlage löschen`,deleteWarning:`Diese Aktion kann nicht rückgängig gemacht werden`,deleteConfirm:`Möchten Sie "{{name}}" wirklich löschen?`,namePlaceholder:`Vorlagenname`,descriptionPlaceholder:`Beschreibung`,settingsJson:`Einstellungen (JSON)`,fieldsCount:`{{count}} Felder`,shownInModals:`In Dialogen angezeigt`,hiddenInModals:`In Dialogen ausgeblendet`,apply:`Anwenden`,toast:{deleted:`Vorlage gelöscht`,updated:`Vorlage aktualisiert`,created:`Vorlage erstellt`,applied:`Vorlage angewendet`}}},support:{debugLoggingActive:`Debug-Protokollierung ist aktiv`,manageLogs:`Verwalten`,collectItem7:`Drucker-Verbindungsstatus und Firmware-Versionen`,collectItem8:`Integrationsstatus (Spoolman, MQTT, HA)`,collectItem9:`Netzwerkschnittstellen (nur Subnetze)`,collectItem10:`Python-Paketversionen`,collectItem11:`Datenbankzustandsprüfungen`,collectItem12:`Docker-Umgebungsdetails`,bundleGenerating:`Bundle wird erstellt...`,bundleStepConnection:`Drucker-Verbindungsprüfungen werden ausgeführt`,bundleStepVirtualPrinters:`Setup-Prüfungen für virtuelle Drucker werden ausgeführt`,bundleStepLogScan:`Aktuelle Protokolle werden auf bekannte Probleme überprüft`,bundleStepBuild:`Support-Bundle-ZIP wird erstellt`},fileManager:{variants:{badge:`{{count}} Versionen`,groupAction:`Als Versionen gruppieren`,groupTooltip:`Diese Dateien als denselben Auftrag markieren, gesliced für verschiedene Drucker`,grouped:`{{count}} Dateien als Versionen gruppiert`,printAlternatives:`Drucken ({{count}} Alternativen)`},title:`Dateimanager`,subtitle:`Organisieren und verwalten Sie Ihre Druckdateien`,uploadFiles:`Dateien hochladen`,newFolder:`Neuer Ordner`,folderName:`Ordnername`,folderNamePlaceholder:`z.B. Funktionsteile`,renameFile:`Datei umbenennen`,renameFolder:`Ordner umbenennen`,invalidFilenameChar:`Das Zeichen "{{char}}" ist in Druck-Dateinamen nicht erlaubt. Die SD-Karte des Druckers lehnt folgende Zeichen ab: < > : " / \\ | ? *`,moveFiles:`{{count}} Datei(en) verschieben`,rootNoFolder:`Stammverzeichnis (Kein Ordner)`,current:`aktuell`,linkFolder:`Ordner verknüpfen`,linkFolderDescription:`"{{name}}" mit einem Projekt oder Archiv verknüpfen für schnellen Zugriff.`,project:`Projekt`,archive:`Archiv`,noProjectsFound:`Keine Projekte gefunden`,noArchivesFound:`Keine Archive gefunden`,unlink:`Verknüpfung aufheben`,link:`Verknüpfen`,dragDropFiles:`Dateien hierher ziehen`,dropFilesHere:`Dateien hier ablegen`,releaseToUpload:`Loslassen zum Hochladen`,orClickToBrowse:`oder klicken zum Durchsuchen`,allFileTypesSupported:`Alle Dateitypen werden unterstützt. ZIP-Dateien werden extrahiert.`,zipFilesDetected:`ZIP-Dateien erkannt`,zipExtractOptions:`ZIP-Dateien werden extrahiert. Wählen Sie, wie die Ordnerstruktur behandelt werden soll:`,preserveZipStructure:`Ordnerstruktur aus ZIP beibehalten`,createFolderFromZip:`Ordner aus ZIP-Dateiname erstellen`,stlThumbnailGeneration:`STL-Vorschaubildgenerierung`,zipMayContainStl:`ZIP-Dateien können STL-Dateien enthalten. Vorschaubilder können während der Extraktion generiert werden.`,thumbnailsCanBeGenerated:`Vorschaubilder können für STL-Dateien generiert werden. Große Modelle benötigen möglicherweise mehr Zeit.`,generateThumbnailsForStl:`Vorschaubilder für STL-Dateien generieren`,threemfDetected:`3MF-Dateien erkannt`,threemfExtractionInfo:`Druckermodell, Material, Farbe und Druckeinstellungen werden automatisch aus 3MF-Dateien extrahiert.`,willBeExtracted:`Wird extrahiert`,filesExtracted:`{{count}} Dateien extrahiert`,uploadComplete:`Upload abgeschlossen: {{succeeded}} erfolgreich`,uploadFailed:`Hochladen fehlgeschlagen`,zipFilesFailed:`{{count}} Dateien fehlgeschlagen`,uploading:`Hochladen...`,changeLink:`Verknüpfung ändern...`,linkTo:`Verknüpfen mit...`,linkToProjectOrArchive:`Mit Projekt oder Archiv verknüpfen`,generateThumbnail:`Vorschaubild generieren`,generateThumbnails:`Vorschaubilder generieren`,generateThumbnailsForMissing:`Vorschaubilder für STL-Dateien ohne Vorschau generieren`,gridView:`Rasteransicht`,listView:`Listenansicht`,lowDiskSpaceWarning:`Warnung: Wenig Speicherplatz`,lowDiskSpaceDetails:`Nur {{free}} frei von {{total}} gesamt. Schwellenwert ist auf {{threshold}} GB eingestellt.`,files:`Dateien`,folders:`Ordner`,size:`Größe`,free:`Frei`,allFiles:`Alle Dateien`,allExternal:`Extern`,externalIsEmpty:`Keine externen Dateien`,externalEmptyDescription:`Dateien aus deinen verknüpften externen Ordnern erscheinen hier.`,wrap:`Umbrechen`,enableTextWrapping:`Textumbruch aktivieren`,disableTextWrapping:`Textumbruch deaktivieren`,collapse:`Einklappen`,collapseFoldersByDefault:`Ordner standardmäßig einklappen`,expandFoldersByDefault:`Ordner standardmäßig ausklappen`,folderSort:`Ordner sortieren`,folderSortByName:`Nach Name`,folderSortByActivity:`Nach letzter Aktivität`,dragToResizeTooltip:`Ziehen zum Ändern der Größe, Doppelklick zum Zurücksetzen`,searchFiles:`Dateien suchen...`,searchSubfoldersHint:`Inklusive Unterordner`,readme:{truncated:`Gekürzt`,show:`README anzeigen`,hide:`README ausblenden`,label:`README`},tags:{title:`Tags`,subtitle:`Dateien mit Labels versehen — Spielzeug, kindersicher, nur PETG, was immer du willst.`,manage:`Tags`,manageTitle:`Tag-Katalog verwalten`,add:`Neuer Tag`,edit:`Tag umbenennen`,name:`Name`,fileCount:`Dateien`,empty:`Noch keine Tags. Erstelle einen, um Dateien zu kennzeichnen.`,noMatches:`Keine passenden Tags.`,createPlaceholder:`z. B. Spielzeug, kindersicher, petg`,createButton:`Erstellen`,nameRequired:`Name ist erforderlich.`,searchPlaceholder:`Tags filtern...`,created:`Tag erstellt.`,updated:`Tag umbenannt.`,deleted:`Tag entfernt.`,saveFailed:`Tag konnte nicht gespeichert werden.`,deleteFailed:`Tag konnte nicht entfernt werden.`,applyFailed:`Tags konnten nicht angewendet werden.`,applyAdd:`Tags hinzufügen`,applyRemove:`Tags entfernen`,applyAddSuccess:`{{count}} Tag(s) zu {{files}} Datei(en) hinzugefügt.`,applyRemoveSuccess:`{{count}} Tag(s) von {{files}} Datei(en) entfernt.`,actionAdd:`Zu ausgewählten Dateien hinzufügen`,actionRemove:`Von ausgewählten Dateien entfernen`,tagAction:`Tag`,bulkTitle:`{{count}} ausgewählte Datei(en) taggen`,bulkTooltip:`Tags für alle ausgewählten Dateien hinzufügen oder entfernen.`,noPermission:`Du hast keine Berechtigung, Dateien zu taggen.`,filterLabel:`Filtern nach:`,clearAll:`Alle entfernen`,confirmDelete:`Tag "{{name}}" löschen?`,confirmDeleteMessage:`Entfernt den Tag aus dem Katalog. Dateien behalten ihre übrigen Tags.`,confirmDeleteInUseMessage:`Dieser Tag ist auf {{count}} Datei(en). Beim Löschen verschwindet er von allen; die Dateien selbst bleiben unverändert.`,editAria:`{{name}} bearbeiten`,deleteAria:`{{name}} löschen`},allTypes:`Alle Typen`,prints:`Drucke`,ascending:`Aufsteigend`,descending:`Absteigend`,showModified:`Änderungsdatum anzeigen`,hideModified:`Änderungsdatum ausblenden`,lastModified:`Zuletzt geändert`,lastActivity:`Letzte Aktivität`,resultsCount:`{{showing}} von {{total}} Dateien`,selectAll:`Alle auswählen`,deselectAll:`Auswahl aufheben`,selected:`{{count}} ausgewählt`,adding:`Hinzufügen...`,loadingFiles:`Dateien werden geladen...`,folderIsEmpty:`Ordner ist leer`,noFilesYet:`Noch keine Dateien`,folderEmptyDescription:`Laden Sie Dateien hoch oder verschieben Sie Dateien in diesen Ordner.`,noFilesDescription:`Laden Sie Dateien hoch, um Ihre Druckdateien zu organisieren.`,noMatchingFiles:`Keine passenden Dateien`,noMatchingFilesDescription:`Keine Dateien entsprechen Ihren aktuellen Such- oder Filterkriterien.`,clearFilters:`Filter zurücksetzen`,printedCount:`{{count}}x gedruckt`,uploadedBy:`Hochgeladen von`,deleteFolder:`Ordner löschen`,deleteFile:`Datei löschen`,deleteFilesCount:`{{count}} Dateien löschen`,deleteFolderConfirm:`Möchten Sie diesen Ordner wirklich löschen? Alle Dateien darin werden ebenfalls gelöscht.`,deleteFileConfirm:`Möchten Sie diese Datei wirklich löschen?`,deleteFilesConfirm:`Möchten Sie {{count}} ausgewählte Dateien wirklich löschen? Diese Aktion kann nicht rückgängig gemacht werden.`,deleting:`Wird gelöscht...`,noPermissionRenameFolder:`Sie haben keine Berechtigung, Ordner umzubenennen`,noPermissionLinkFolder:`Sie haben keine Berechtigung, Ordner zu verknüpfen`,noPermissionDeleteFolder:`Sie haben keine Berechtigung, Ordner zu löschen`,onlyEmptyFoldersDeletable:`Sie können nur leere Ordner löschen`,noPermissionPrint:`Sie haben keine Berechtigung zum Drucken`,noPermissionSlice:`Sie haben keine Berechtigung, Dateien zu slicen`,noPermissionAddToQueue:`Sie haben keine Berechtigung, zur Warteschlange hinzuzufügen`,noPermissionDownload:`Sie haben keine Berechtigung, Dateien herunterzuladen`,noPermissionPreview:`Sie haben keine Berechtigung, Dateien in der Vorschau anzuzeigen`,preview3d:`3D-Vorschau`,noPermissionRenameFile:`Sie haben keine Berechtigung, diese Datei umzubenennen`,noPermissionGenerateThumbnail:`Sie haben keine Berechtigung, Vorschaubilder zu generieren`,noPermissionDeleteFile:`Sie haben keine Berechtigung, diese Datei zu löschen`,noPermissionCreateFolder:`Sie haben keine Berechtigung, Ordner zu erstellen`,noPermissionUpload:`Sie haben keine Berechtigung, Dateien hochzuladen`,noPermissionMoveFiles:`Sie haben keine Berechtigung, Dateien zu verschieben`,noPermissionDeleteFiles:`Sie haben keine Berechtigung, Dateien zu löschen`,linkExternal:`Extern verknüpfen`,linkExternalFolder:`Externen Ordner verknüpfen`,linkExternalFolderDescription:`Ein Host-Verzeichnis (NAS, USB, Netzlaufwerk) in den Dateimanager einbinden. Dateien werden nicht kopiert — sie werden direkt vom Originalpfad gelesen.`,externalFolderNamePlaceholder:`z.B. NAS-Drucke`,externalPath:`Host-Pfad`,externalPathHelp:`Absoluter Pfad zum Verzeichnis auf dem Docker-Host. Muss als Bind-Mount in den Container eingebunden sein.`,readOnly:`Nur Lesen`,readOnlyHelp:`verhindert Uploads und Löschungen`,showHiddenFiles:`Versteckte Dateien anzeigen (Punkt-Dateien)`,externalFolder:`Externer Ordner`,scanFolder:`Scannen`,toast:{folderCreated:`Ordner erstellt`,openInSlicerFailed:`Konnte nicht im Slicer öffnen`,folderDeleted:`Ordner gelöscht`,fileDeleted:`Datei gelöscht`,filesDeleted:`{{count}} Dateien gelöscht`,filesMoved:`Dateien verschoben`,folderLinked:`Ordner verknüpft`,folderUnlinked:`Ordnerverknüpfung aufgehoben`,externalFolderLinked:`Externer Ordner verknüpft und gescannt`,folderScanned:`Scan abgeschlossen: {{added}} hinzugefügt, {{removed}} entfernt`,addedToQueue:`{{count}} Datei(en) zur Warteschlange hinzugefügt`,addedToQueuePartial:`{{added}} Datei(en) hinzugefügt, {{failed}} fehlgeschlagen`,failedToAddToQueue:`Fehler beim Hinzufügen: {{error}}`,fileRenamed:`Datei umbenannt`,folderRenamed:`Ordner umbenannt`,thumbnailsGenerated:`{{count}} Vorschaubild(er) generiert`,thumbnailsGeneratedPartial:`{{succeeded}} Vorschaubild(er) generiert, {{failed}} fehlgeschlagen`,noStlMissingThumbnails:`Keine STL-Dateien ohne Vorschaubild`,failedToGenerateThumbnails:`Fehler beim Generieren der Vorschaubilder: {{error}}`,thumbnailGenerated:`Vorschaubild generiert`,failedToGenerateThumbnail:`Fehler beim Generieren des Vorschaubildes: {{error}}`}},projects:{parentLabel:`Übergeordnetes Projekt`,parentNone:`Keines (Hauptprojekt)`,parentHint:`Dieses Projekt einem anderen unterordnen, damit seine Zahlen in ein Hauptprojekt einfließen`,partOf:`Teil von {{name}}`,subProjectCount:`{{count}} Unterprojekte`,subProjectsOf:`Unterprojekte von {{name}}`,collapseSubProjects:`Unterprojekte einklappen`,expandSubProjects:`Unterprojekte ausklappen`,title:`Projekte`,subtitle:`Organisieren und verfolgen Sie Ihre 3D-Druckprojekte`,newProject:`Neues Projekt`,editProject:`Projekt bearbeiten`,deleteProject:`Projekt löschen`,projectName:`Projektname`,description:`Beschreibung`,noProjects:`Noch keine Projekte`,noProjectsFiltered:`Keine {{status}} Projekte`,noProjectsFilteredHelp:`Sie haben keine {{status}} Projekte. Projekte werden hier angezeigt, wenn sich ihr Status ändert.`,createFirst:`Erstellen Sie Ihr erstes Projekt, um verwandte Drucke zu organisieren, den Fortschritt zu verfolgen und Ihre Builds zu verwalten.`,createFirstButton:`Erstes Projekt erstellen`,create:`Erstellen`,files:`Dateien`,prints:`Drucke`,plates:`Platten`,parts:`Teile`,lastModified:`Zuletzt geändert`,deleteConfirm:`Möchten Sie dieses Projekt wirklich löschen? Archive und Warteschlangenelemente werden getrennt, aber nicht gelöscht.`,addFiles:`Dateien hinzufügen`,removeFile:`Datei entfernen`,viewDetails:`Details anzeigen`,namePlaceholder:`z.B. Voron 2.4 Build`,descriptionPlaceholder:`Optionale Beschreibung...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URL muss mit http:// oder https:// beginnen`,openExternalUrl:`Projekt-URL öffnen`,coverImageLabel:`Titelbild`,coverImageAlt:`Projekt-Titelbild`,coverImageUpload:`Hochladen`,coverImageReplace:`Ersetzen`,coverImageRemove:`Entfernen`,color:`Farbe`,targetPlates:`Ziel-Platten`,targetPlatesPlaceholder:`z.B. 25`,targetPlatesHelp:`Anzahl der Druckaufträge`,targetParts:`Ziel-Teile`,targetPartsPlaceholder:`z.B. 150`,targetPartsHelp:`Benötigte Objekte insgesamt`,targetSets:`Kopien pro Datei`,targetSetsPlaceholder:`z. B. 10`,targetSetsHelp:`Wie oft jede druckbare Datei gedruckt werden soll`,tagsLabel:`Tags (kommagetrennt)`,tagsPlaceholder:`z.B. voron, funktional, geschenk`,dueDate:`Fälligkeitsdatum`,priority:`Priorität`,priorityLow:`Niedrig`,priorityNormal:`Normal`,priorityHigh:`Hoch`,priorityUrgent:`Dringend`,statusActive:`Aktiv`,statusCompleted:`Abgeschlossen`,statusArchived:`Archiviert`,done:`Fertig`,completed:`abgeschlossen`,failed:`fehlgeschlagen`,inQueue:`in Warteschlange`,noPrintsYet:`Noch keine Drucke`,printJobs:`Druckaufträge (Platten)`,partsPrinted:`Gedruckte Teile`,failedParts:`Fehlgeschlagene Teile`,import:`Importieren`,export:`Exportieren`,importProject:`Projekt importieren`,exportAll:`Alle Projekte exportieren`,loading:`Projekte werden geladen...`,noEditPermission:`Sie haben keine Berechtigung, Projekte zu bearbeiten`,noDeletePermission:`Sie haben keine Berechtigung, Projekte zu löschen`,noCreatePermission:`Sie haben keine Berechtigung, Projekte zu erstellen`,noImportPermission:`Sie haben keine Berechtigung, Projekte zu importieren`,noExportPermission:`Sie haben keine Berechtigung, Projekte zu exportieren`,toast:{created:`Projekt erstellt`,updated:`Projekt aktualisiert`,deleted:`Projekt gelöscht`,imported:`Projekt importiert`,multipleImported:`{{count}} Projekte importiert`,importFailed:`Import fehlgeschlagen`,exported:`Projekte exportiert (nur Metadaten)`}},projectDetail:{notFound:`Projekt nicht gefunden`,backToProjects:`Zurück zu Projekten`,export:`Exportieren`,exportProject:`Projekt exportieren`,noExportPermission:`Sie haben keine Berechtigung, Projekte zu exportieren`,noEditPermission:`Sie haben keine Berechtigung, Projekte zu bearbeiten`,partOf:`Teil von:`,priorityLabel:`Priorität:`,noPrints:`Noch keine Drucke in diesem Projekt`,status:{active:`Aktiv`,completed:`Abgeschlossen`,archived:`Archiviert`},priority:{low:`Niedrig`,normal:`Normal`,high:`Hoch`,urgent:`Dringend`},dueDate:{overdue:`Überfällig`,today:`Heute fällig`,daysLeft:`{{count}} Tage übrig`},progress:{platesProgress:`Platten-Fortschritt`,partsProgress:`Teile-Fortschritt`,setsProgress:`Vollständige Sätze`,sets:`Sätze`,setsHint:`Ein Satz ist vollständig, wenn jede druckbare Datei diese Anzahl erreicht hat`,printJobs:`Druckaufträge`,parts:`Teile`,percentComplete:`{{percent}}% abgeschlossen`,remaining:`{{count}} verbleibend`},stats:{printJobs:`Druckaufträge`,total:`gesamt`,failed:`{{count}} fehlgeschlagen`,partsPrinted:`{{count}} Teile gedruckt`,printTime:`Druckzeit`,filamentUsed:`Filament verbraucht`},cost:{title:`Kostenverfolgung`,filamentCost:`Filamentkosten`,energy:`Energie`,totalCost:`Erwartete Gesamtkosten`,total:`Gesamt`,includesBom:`inkl. Stückliste`,budget:`Budget`,remaining:`Verbleibend`},subProjects:{title:`Unterprojekte ({{count}})`,jobs:`{{count}} Aufträge`},rollup:{title:`Inklusive {{count}} Unterprojekten`,progress:`Gesamtfortschritt`,percentComplete:`{{percent}}% abgeschlossen`},notes:{title:`Notizen`,noEditPermission:`Sie haben keine Berechtigung, Notizen zu bearbeiten`,placeholder:`Notizen zu diesem Projekt hinzufügen...`,empty:`Noch keine Notizen. Klicken Sie auf Bearbeiten, um Notizen hinzuzufügen.`},files:{title:`Dateien`,linkFolders:`Ordner aus dem Dateimanager verknüpfen`,forQuickAccess:`für schnellen Zugriff auf dieses Projekt.`,fileCount:`{{count}} Datei(en)`,empty:`Keine Ordner verknüpft. Gehen Sie zum Dateimanager und verknüpfen Sie einen Ordner mit diesem Projekt.`,printedCount:`{{count}}-mal gedruckt`,progressTooltip:`{{done}} von {{target}} abgeschlossenen Drucken`,noFiles:`Keine Dateien in diesem Ordner.`},bom:{title:`Stückliste`,acquired:`{{completed}}/{{total}} beschafft`,showAll:`Alle anzeigen`,hideDone:`Erledigte ausblenden`,addPart:`Teil hinzufügen`,noAddPermission:`Sie haben keine Berechtigung, Teile hinzuzufügen`,partNamePlaceholder:`Teilename (z.B. M3x8 Schrauben)`,partName:`Teilename`,qty:`Menge`,price:`Preis ({{currency}})`,sourcingUrlPlaceholder:`Bezugsquelle-URL (optional)`,remarksPlaceholder:`Bemerkungen (optional)`,deletePart:`Teil löschen`,deleteConfirm:`Möchten Sie "{{name}}" wirklich löschen?`,noUpdatePermission:`Sie haben keine Berechtigung, Teile zu aktualisieren`,noEditPermission:`Sie haben keine Berechtigung, Teile zu bearbeiten`,noDeletePermission:`Sie haben keine Berechtigung, Teile zu löschen`,totalCost:`Gesamtkosten:`,empty:`Keine Teile in der Stückliste. Fügen Sie Hardware, Elektronik oder andere Komponenten hinzu, um zu verfolgen, was beschafft werden muss.`},timeline:{title:`Aktivitätsverlauf`,empty:`Noch keine Aktivität.`},template:{saveAsTemplate:`Als Vorlage speichern`,noCreatePermission:`Sie haben keine Berechtigung, Vorlagen zu erstellen`},queue:{title:`Warteschlange`,viewAll:`Alle anzeigen`,printing:`{{count}} druckend`,queued:`{{count}} in Warteschlange`},prints:{title:`Drucke ({{count}})`},toast:{projectUpdated:`Projekt aktualisiert`,partAdded:`Teil hinzugefügt`,partRemoved:`Teil entfernt`,exportFailed:`Export fehlgeschlagen`,projectExported:`Projekt exportiert`,templateCreated:`Vorlage erstellt`}},system:{title:`Systeminformationen`,version:`Version`,uptime:`Laufzeit`,cpuUsage:`CPU-Auslastung`,memoryUsage:`Speicherauslastung`,diskUsage:`Festplattenauslastung`,networkInfo:`Netzwerkinformationen`,logs:`Protokolle`,debugMode:`Debug-Modus`,enableDebug:`Debug-Protokollierung aktivieren`,disableDebug:`Debug-Protokollierung deaktivieren`,downloadLogs:`Protokolle herunterladen`,clearLogs:`Protokolle löschen`,dockerInfo:`Docker-Info`,containerName:`Container-Name`,imageName:`Image-Name`,platform:`Plattform`,architecture:`Architektur`},sponsors:{sectionTitle:`Unabhängig & von der Community finanziert`,tagline:`Bambuddy ist kostenlos und bleibt es, weil Menschen es freiwillig unterstützen. Kein VC, kein Cloud-Zwang.`,viewSupporters:`Unterstützer ansehen`,toastPrints:`Du hast {{count}} Drucke mit Bambuddy abgeschlossen. Bambuddy bleibt kostenlos dank seiner Unterstützer.`,toastCost:`Du hast {{total}} an Filament mit Bambuddy verfolgt. Sieh dir an, wer das Projekt unabhängig hält.`,toastArchives:`{{count}} Drucke mit Bambuddy archiviert. Sieh dir an, wer es unabhängig hält.`,toastAnniversary:`Ein Jahr mit Bambuddy! Sieh dir an, wer das Projekt unabhängig hält.`,toastVersionUpdate:`Aktualisiert auf v{{version}}. Bambuddy bleibt kostenlos dank seiner Unterstützer.`,toastBusiness:`Sie betreiben Bambuddy auf {{count}} Druckern. Für Teams gibt es Support-Pakete – bevorzugte Fehlerbehebung, Rechnungsstellung und einen direkten Draht zum Maintainer.`,businessCta:`Bambuddy für Unternehmen`,businessTitle:`Bambuddy für Unternehmen`,businessTagline:`Sie betreiben {{count}} Drucker. Für Teams und Druckfarmen gibt es priorisierten Support, kommerzielle Lizenzen und Rechnungsstellung.`},library:{title:`Filament-Bibliothek`,addFilament:`Filament hinzufügen`,editFilament:`Filament bearbeiten`,deleteFilament:`Filament löschen`,vendor:`Hersteller`,material:`Material`,color:`Farbe`,kFactor:`K-Faktor`,temperature:`Temperatur`,noFilaments:`Keine Filamente in der Bibliothek`,deleteConfirm:`Möchten Sie dieses Filament wirklich löschen?`,importFromPrinter:`Vom Drucker importieren`,exportToFile:`In Datei exportieren`,runWithPipeline:{actionLabel:`Mit Pipeline ausführen`,noPermission:`Du hast keine Berechtigung, Pipelines auszuführen`,modalTitle:`Mit Pipeline ausführen`,confirmTitle:`Lauf bestätigen`,confirmIntro:`Pre-Flight hat Probleme mit diesem Lauf gefunden`,sourceHint:`Quelle`,pipelineHint:`Pipeline`,targetHint:`Ziel`,pipelineListAria:`Verfügbare Pipelines`,runAnyway:`Trotzdem ausführen`,loading:`Wird geladen…`,empty:`Noch keine Pipelines gespeichert. Öffne den Slice-Dialog und klicke „Als Pipeline speichern“, um eine zu erstellen.`,noTarget:`Kein Zieldrucker festgelegt`,noTargetMessage:`Diese Pipeline hat keinen Zieldrucker. Öffne sie in den Einstellungen, um einen festzulegen.`,copies:`Kopien`,copiesHint:`max. {{n}}`,classTarget:`Beliebiger {{model}}`,toast:{started:`Pipeline-Lauf gestartet`,failed:`Lauf konnte nicht gestartet werden`},issue:{printerNotSet:`Kein Zieldrucker für diese Pipeline festgelegt.`,printerNotFound:`Zieldrucker existiert nicht mehr.`,printerDisabled:`Zieldrucker ist deaktiviert.`,printerOffline:`Zieldrucker ist offline.`,filamentType:`Filament-Slot {{slot}}: erwartet {{expected}}, AMS hat {{actual}}`,filamentColor:`Filament-Slot {{slot}}: Farbe weicht ab (erwartet {{expected}}, AMS hat {{actual}})`,amsSlotMissing:`AMS-Slot {{slot}} ist auf diesem Drucker nicht verfügbar`,filamentUnverified:`Filament-Slot {{slot}} stammt aus einem Cloud-/Standard-Preset und konnte nicht statisch verifiziert werden.`,noClassMatches:`Keine Drucker in dieser Installation entsprechen der Zielmodellklasse der Pipeline ({{expected}}).`,classNotSet:`Pipeline-Ziel ist auf eine Druckerklasse gesetzt, aber kein Modell wurde gewählt.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Es werden Slicer-Standardwerte angezeigt: Ihr Slicer-Sidecar ist älter als diese Funktion und kann die Werte eines Profils nicht liefern. Aktualisieren Sie das Sidecar-Image, um sie zu sehen. Alles, was Sie nicht ändern, verwendet weiterhin das Profil.`,presetValuesNotConfigured:`Es werden Slicer-Standardwerte angezeigt: Es ist kein Slicer-Sidecar konfiguriert, daher können die Werte eines Profils nicht gelesen werden. Alles, was Sie nicht ändern, verwendet weiterhin das Profil.`,presetValuesSidecarUnavailable:`Es werden Slicer-Standardwerte angezeigt: Das Slicer-Sidecar hat nicht geantwortet, daher können die Werte eines Profils nicht gelesen werden. Alles, was Sie nicht ändern, verwendet weiterhin das Profil.`,presetValuesUnavailable:`Es werden Slicer-Standardwerte angezeigt: Die Werte des gewählten Profils konnten nicht gelesen werden. Alles, was Sie nicht ändern, verwendet weiterhin das Profil.`,filamentDefault:`Standard`,fromFile:`aus Datei`,fromFileHint:`Der Designer hat dies in der Quelldatei geändert. Wert: {{value}}.`,fromFilePrinterCoupled:`Drucker des Designers`,fromFilePrinterCoupledHint:`Auf den Drucker abgestimmt, für den diese Datei erstellt wurde – auf Ihrem kann der Wert falsch oder außerhalb des Bereichs sein.`,fromFileOverridesPreset:`überschreibt Preset`,fromFileOverridesPresetHint:`Die Datei setzt hier {{value}}, das gewählte Preset verwendet {{preset}}. Nur aktivieren, wenn die Datei Vorrang haben soll.`,useFromFile:`Wert aus der Quelldatei für {{option}} verwenden`,otherFromFile:`Weitere Einstellungen aus dieser Datei`,fromFileSummary:`Der Designer hat in dieser Datei {{count}} Prozesseinstellungen geändert. Verwendet werden nur die, die du ankreuzt.`,fromFileUseAll:`Einstellungen des Designers übernehmen`,fromFileUseAllHint:`Kreuzt die Einstellungen an, die sich auf andere Drucker übertragen lassen. Die auf den Drucker des Designers abgestimmten und die, die dein gewähltes Preset ausmachen, bleiben aus.`,fromFileClear:`{{count}} zurücksetzen`,loading:`Slicer-Einstellungen werden geladen…`,mode:{simple:`Einfach`,advanced:`Erweitert`,expert:`Experte`},searchPlaceholder:`Einstellungen suchen`,resetAll:`{{count}} zurücksetzen`,resetOption:`Auf Standard zurücksetzen`,noMatches:`Keine Einstellungen passen zu dieser Suche.`},slice:{filamentSlotUnset:`nicht gewählt`,processSettingsEmbedded:`Wird nicht verwendet, solange „Integrierte Einstellungen der Datei verwenden“ aktiv ist – die Einstellungen der Datei bestimmen diesen Slice.`,processSettingsInactive:`Inaktiv`,presetsHidden:`{{count}} ausgeblendet`,showAllPresets:`Alle anzeigen`,showFewerPresets:`Weniger anzeigen`,processSettings:`Prozesseinstellungen`,processSettingsHint:`Passen Sie das gewählte Profil für diesen Slice an. Alles, was Sie nicht ändern, bleibt wie im Profil definiert.`,processSettingsChanged:`{{count}} geändert`,processSettingsUnchanged:`Profilstandard`,title:`Modell slicen`,action:`Slicen`,actionAll:`Alle {{count}} Plates slicen`,actionAllTitle:`Alle Plates in eine einzelne Multi-Plate-Ausgabe slicen (ein Archiv). Die Filamentauswahl gilt für jeden Slot des Projekts.`,allPlatesToggle:`Alle {{count}} Plates slicen`,slicing:`Slicen…`,printer:`Drucker-Profil`,process:`Prozess-Profil`,filament:`Filament-Profil`,filamentSlot:`Filament {{index}} – {{type}}`,filamentColour:`Filamentfarbe`,selectPreset:`— Profil auswählen —`,loadingPresets:`Profile werden geladen…`,analyzingPlateFilaments:`Plattenfilamente werden analysiert…`,analyzingPlateFilamentsHint:`Es wird ein Probeschnitt ausgeführt, um die belegten AMS-Slots dieser Platte zu ermitteln. Wird zwischengespeichert — erneutes Öffnen ist sofort.`,previewToast:`{{name}} wird analysiert — {{elapsed}}`,previewWithProgress:`{{name}} wird analysiert — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— wird von dieser Platte nicht verwendet`,noPresetsForSlot:`Keine Profile verfügbar`,otherPrinters:`Andere Drucker`,presetsLoadFailed:`Profile konnten nicht geladen werden. Importiere sie zuerst unter Einstellungen → Profile.`,refreshPresets:`Aktualisieren`,refreshPresetsTitle:`Profile neu laden — die aktuellen Cloud- und Bundle-Listen abrufen (nach dem Löschen eines Profils in Bambu Studio oder Bambu Handy verwenden)`,allPresetsRequired:`Alle Profile müssen ausgewählt sein`,useEmbedded:`Eingebettete Einstellungen der Datei verwenden`,useEmbeddedHint:`So slicen, wie der Ersteller es angelegt hat (Wände, Füllung, Filament), statt mit den obigen Profilen. Verfügbar, weil dein Drucker zur Datei passt.`,autoOrient:`Objekte automatisch ausrichten`,autoOrientHint:`Der Slicer dreht jedes Objekt zuerst auf die am besten druckbare Seite. Überschreibt die Ausrichtung aus der Datei.`,autoArrange:`Automatisch auf dem Druckbett anordnen`,autoArrangeHint:`Der Slicer verteilt die Objekte so, dass sie sich nicht mehr überlappen. Ersetzt die Anordnung aus der Datei.`,enqueuing:`Slice-Auftrag wird übermittelt…`,queued:`In Warteschlange…`,failed:`Slicen fehlgeschlagen. Logs des Slicer-Sidecars prüfen.`,startedToast:`{{name}} wird im Hintergrund gesliced…`,queuedToast:`Warteschlange: {{name}} — {{elapsed}}`,runningToast:`{{name}} wird gesliced — {{elapsed}}`,runningWithProgress:`{{name}} – {{stage}} ({{percent}} %) – {{elapsed}}`,runningWithProgressMultiPlate:`Plate {{plateIndex}} von {{plateCount}} • {{name}} – {{stage}} ({{percent}} %) – {{elapsed}}`,completedToast:`{{name}} wurde gesliced`,externalWriteFallbackToast:`In der internen Bibliothek gespeichert: In den externen Ordner konnte nicht geschrieben werden`,failedTitle:`Slicen fehlgeschlagen`,failedToast:`Slicen von {{name}} fehlgeschlagen: {{detail}}`,tier:{local:`Importiert`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Standard`},cloud:{notAuthenticated:`In Bambu Cloud anmelden (Einstellungen → Profile → Bambu Cloud), um deine Cloud-Profile zu sehen.`,expired:`Bambu-Cloud-Sitzung abgelaufen — erneut anmelden, um die Cloud-Profile zu aktualisieren.`,unreachable:`Bambu Cloud ist gerade nicht erreichbar. Lokale und Standard-Profile funktionieren weiterhin.`},orcaCloud:{notAuthenticated:`Bei Orca Cloud anmelden (Profile → Orca Cloud), um Ihre Orca-Profile zu sehen.`,expired:`Orca Cloud-Sitzung abgelaufen — erneut anmelden, um die Orca-Profile zu aktualisieren.`,unreachable:`Orca Cloud ist derzeit nicht erreichbar. Andere Profile funktionieren weiterhin.`},bedType:{label:`Druckbett`,auto:`Auto (aus Prozess-Profil)`,coolPlate:`Cool Plate`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`},pipelines:{label:`Pipeline`,applyAria:`Pipeline anwenden`,applyPrompt:`Pipeline anwenden…`,empty:`Keine gespeicherten Pipelines`,saveButton:`Als Pipeline speichern`,saveTitle:`Aktuelle Auswahl aller vier Slots als wiederverwendbare Pipeline speichern`,namePlaceholder:`Pipeline-Name`,nameAria:`Neuer Pipeline-Name`,toast:{applied:`„{{name}}“ angewendet`,saved:`Pipeline gespeichert`,saveFailed:`Speichern fehlgeschlagen`}}},spoolman:{title:`Spoolman-Integration`,enabled:`Spoolman aktiviert`,url:`Spoolman URL`,connected:`Verbunden`,disconnected:`Nicht verbunden`,testConnection:`Verbindung testen`,sync:`Synchronisieren`,syncing:`Synchronisiert...`,lastSync:`Letzte Synchronisierung`,linkToSpoolman:`Mit Spoolman verknüpfen`,openInSpoolman:`In Spoolman öffnen`,unlinkSpool:`Spule trennen`,unlinkConfirmTitle:`Spule entfernen?`,unlinkConfirmMessage:`Die Spule wird vom Slot entfernt. Die Spulendaten selbst bleiben unverändert.`,selectSpool:`Spule auswählen`,noUnlinkedSpools:`Keine nicht zugewiesenen Spulen verfügbar`,linkSuccess:`Spule erfolgreich zugewiesen`,linkFailed:`Spule konnte nicht zugewiesen werden`,unlinkSuccess:`Spule erfolgreich entfernt`,unlinkFailed:`Spule konnte nicht entfernt werden`,linkedSpool:`Zugewiesene Spule`,spoolId:`Spulen-ID`,fillSourceLabel:`(Spoolman)`,weight:`Gewicht`,remaining:`Verbleibend`,disableWeightSync:`AMS-Gewichtsschätzung deaktivieren`,disableWeightSyncDesc:`Verbleibende Kapazität nicht aus AMS-Schätzungen aktualisieren. Verwenden Sie dies, wenn Sie die Verbrauchserfassung von Spoolman gegenüber den prozentualen AMS-Schätzungen bevorzugen. Neue Spulen verwenden weiterhin die AMS-Schätzung als Anfangsgewicht.`,reportPartialUsage:`Teilverbrauch bei fehlgeschlagenen Drucken melden`,reportPartialUsageDesc:`Wenn ein Druck fehlschlägt oder abgebrochen wird, den geschätzten Filamentverbrauch bis zu diesem Zeitpunkt basierend auf dem Schichtfortschritt melden.`},locations:{title:`Lagerorte`,subtitle:`Regale, Schubladen und andere physische Lagerplätze für Spulen verwalten`,add:`Lagerort hinzufügen`,addShort:`Hinzufügen`,edit:`Lagerort bearbeiten`,name:`Name`,spools:`Spulen`,sensors:`Sensoren`,empty:`Noch keine Lagerorte. Erstellen Sie Ihr erstes Regal oder Ihre erste Schublade.`,manage:`Lagerorte`,createPlaceholder:`z. B. Regal A, Schublade 1`,nameRequired:`Name des Lagerorts ist erforderlich`,created:`Lagerort erstellt`,updated:`Lagerort aktualisiert`,deleted:`Lagerort gelöscht`,saveFailed:`Lagerort konnte nicht gespeichert werden`,deleteFailed:`Lagerort konnte nicht gelöscht werden`,deleteBlocked:`Entfernen Sie zuerst alle Spulen von diesem Lagerort`,confirmDelete:`„{{name}}“ löschen?`,confirmDeleteMessage:`Dieser Lagerort wird aus dem Katalog entfernt. Spulen müssen zuerst verschoben werden.`,confirmDeleteMessageWithSensors:`Dieser Lagerort wird aus dem Katalog entfernt. Spulen müssen zuerst verschoben werden. Verbundene Sensoren werden ebenfalls gelöscht.`},inventory:{title:`Spulen-Inventar`,subtitle:`Verwalten Sie Ihre Spulen`,addToInventory:`Zum Inventar hinzufügen`,addToInventoryPending:`Wird hinzugefügt...`,addToInventorySuccess:`Spule zum Inventar hinzugefügt`,addToInventoryFailed:`Spule konnte nicht zum Inventar hinzugefügt werden`,unknownSpoolTitle:`Neues Filament erkannt`,unknownSpoolMessage:`An {{location}} wurde eine Spule mit unbekanntem RFID-Tag erkannt. Jetzt zum Inventar hinzufügen?`,unknownSpoolSlot:`Slot`,bulk:{selectAllVisible:`Alle sichtbaren auswählen`,selectRow:`Zeile auswählen`,selectGroup:`Gruppe auswählen`,selectionCount:`{{count}} ausgewählt`,edit:`Bearbeiten`,printLabels:`Etiketten drucken`,resetUsage:`Verbrauch zurücksetzen`,restore:`Wiederherstellen`,archive:`Archivieren`,delete:`Löschen`,clearSelection:`Auswahl aufheben`,editTitle:`Spulen sammelbearbeiten`,editSubtitle:`Wird auf {{count}} ausgewählte Spulen angewendet. Nur angekreuzte Felder werden aktualisiert.`,editHint:`In ein Feld tippen markiert es für die Aktualisierung — nur angekreuzte Zeilen werden gesendet. Leere Felder bleiben unverändert (Felder leeren geht nur pro Spule).`,useCustom:`„{{value}}" verwenden`,toggleField:`Aktualisierung für dieses Feld umschalten`,changeCount:`{{count}} Felder werden aktualisiert.`,applyPending:`Wird angewendet...`,applyButton:`Auf {{count}} Spulen anwenden`,deleteTitle:`Ausgewählte Spulen löschen`,archiveTitle:`Ausgewählte Spulen archivieren`,restoreTitle:`Ausgewählte Spulen wiederherstellen`,resetUsageTitle:`Verbrauch ausgewählter Spulen zurücksetzen`,deleteMessage:`{{count}} Spulen dauerhaft löschen? Dies kann nicht rückgängig gemacht werden.`,archiveMessage:`{{count}} Spulen archivieren? Sie können später wiederhergestellt werden.`,restoreMessage:`{{count}} archivierte Spulen wiederherstellen?`,resetUsageMessage:`Den "Gesamtverbrauch"-Zähler auf {{count}} Spulen zurücksetzen? Die verbleibende Menge bleibt erhalten.`,updateSuccess:`{{count}} Spulen aktualisiert`,updateFailed:`Sammelaktualisierung fehlgeschlagen`,updatePartial:`{{ok}} Spulen aktualisiert, {{failed}} fehlgeschlagen`,updateAllFailed:`Alle {{count}} Aktualisierungen fehlgeschlagen — Auswahl bleibt erhalten zum erneuten Versuch`,deleteSuccess:`{{count}} Spulen gelöscht`,deleteFailed:`Sammellöschung fehlgeschlagen`,deletePartial:`{{ok}} Spulen gelöscht, {{failed}} fehlgeschlagen`,deleteAllFailed:`Alle {{count}} Löschungen fehlgeschlagen — Auswahl bleibt erhalten zum erneuten Versuch`,archiveSuccess:`{{count}} Spulen archiviert`,archiveFailed:`Sammelarchivierung fehlgeschlagen`,archivePartial:`{{ok}} Spulen archiviert, {{failed}} fehlgeschlagen`,archiveAllFailed:`Alle {{count}} Archivierungen fehlgeschlagen — Auswahl bleibt erhalten zum erneuten Versuch`,restoreSuccess:`{{count}} Spulen wiederhergestellt`,restoreFailed:`Sammelwiederherstellung fehlgeschlagen`,restorePartial:`{{ok}} Spulen wiederhergestellt, {{failed}} fehlgeschlagen`,restoreAllFailed:`Alle {{count}} Wiederherstellungen fehlgeschlagen — Auswahl bleibt erhalten zum erneuten Versuch`,invalidHex:`6 Hex-Zeichen (RRGGBB) oder 8 (RRGGBBAA) eingeben. Anderenfalls wird das Feld nicht übernommen.`},spoolmanMixedContentTitle:`Spoolman lässt sich nicht über HTTPS laden — Browser blockiert gemischte Inhalte`,spoolmanMixedContentBody:`Bambuddy wird über HTTPS ausgeliefert (über deinen Reverse-Proxy), aber deine Spoolman-URL ist nach wie vor HTTP. Browser blockieren gemischte Inhalte aus Sicherheitsgründen, daher kann die eingebettete Spoolman-Oberfläche nicht geladen werden. Spoolman muss ebenfalls über HTTPS erreichbar sein.`,spoolmanMixedContentFixReverseProxy:`Stelle Spoolman hinter denselben Reverse-Proxy wie Bambuddy (Traefik / Nginx / Caddy) mit HTTPS und aktualisiere die Spoolman-URL in den Einstellungen auf die neue HTTPS-Adresse.`,spoolmanMixedContentFixOpenNewTab:`Als Workaround kannst du Spoolman in einem neuen Tab über HTTP öffnen — gemischte Inhalte werden nur innerhalb eingebetteter Frames blockiert, ein eigener Tab funktioniert weiterhin.`,spoolmanOpenInNewTab:`Spoolman in neuem Tab öffnen`,labels:{title:`Spulen-Etiketten drucken`,selectedCount:`{{count}} ausgewählt`,pickSpools:`Wählen Sie, für welche Spulen Etiketten gedruckt werden sollen:`,monochrome:`Monochrom (Schwarz-Weiß-Drucker)`,monochromeHint:`Entfernt das Farbfeld und verbreitert den Text`,startingPosition:`Startposition des Etiketts`,startingPositionRange:`Nur Bogenvorlagen: L7160 unterstützt 1–21; 5160 unterstützt 1–30.`,startingPositionInvalid:`Gib eine ganze Zahl zwischen 1 und {{capacity}} ein.`,startingPositionFirst:`Der Druck beginnt bei Position 1.`,startingPositionSkipped:`Die Positionen 1 bis {{lastPosition}} bleiben auf dem ersten Bogen leer.`,startingPositionRangeError:`Die Startposition muss für diesen Bogen zwischen 1 und {{capacity}} liegen.`,searchPlaceholder:`Name, Marke oder #ID suchen`,filterByMaterial:`Material:`,allMaterials:`Alle`,selectVisible:`Alle sichtbaren auswählen ({{count}})`,deselectVisible:`Sichtbare abwählen`,clearAll:`Alle entfernen`,noSpoolsToShow:`Keine Spulen anzuzeigen. Filter anpassen und erneut versuchen.`,noMatches:`Keine Spulen entsprechen der aktuellen Suche oder dem Filter.`,printOne:`Etikett für diese Spule drucken`,printLabels:`Etiketten drucken…`,bulkTitle:`Spulen aus den aktuell angezeigten {{count}} zum Etikettieren auswählen`,noSpoolsTitle:`Keine Spulen zum Etikettieren`,error:`Etiketten konnten nicht erstellt werden: {{msg}}`,sortBy:{label:`Sortieren:`,id:`Nach ID`,color:`Nach Farbe`},templates:{amsHolderSmall:{label:`AMS-Halter — klein (74 × 33 mm)`,hint:`Ein Etikett pro Seite; passt zum druckbaren Etikett aus dem MakerWorld-Modell 752566 (AMS-Filament-Etikettenhalter).`},amsHolderLarge:{label:`AMS-Halter — groß (75 × 55 mm)`,hint:`Ein Etikett pro Seite; passt zur Kartoneinleger-Variante des AMS-Filament-Etikettenhalters. Genug Platz für Farbprobe, Marke, Material, ID und QR-Code.`},box40x30:{label:`Boxetikett (40 × 30 mm)`,hint:`Ein Etikett pro Seite; gängige DK/Brother-Rollengröße, ideal für Filament-Beutel und Lager-Etiketten.`},box:{label:`Box label (62 × 29 mm)`,hint:`Ein Etikett pro Seite; für Brother PT/QL und Dymo-Kleinetiketten dimensioniert.`},averyL7160:{label:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,hint:`EU-Bogenformat; 21 Etiketten pro A4-Seite.`},avery5160:{label:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,hint:`US-Bogenformat; 30 Etiketten pro Letter-Seite.`}}},csv:{importButton:`CSV importieren`,exportButton:`CSV exportieren`,modalTitle:`Spulen aus CSV importieren`,selectFile:`CSV-Datei auswählen oder hierher ziehen`,dragHint:`Kopfzeile: material (erforderlich), brand, subtype, color_name, rgba, …`,parsing:`Datei wird gelesen…`,previewError:`CSV-Datei konnte nicht gelesen werden`,validCount:`{{count}} gültig`,errorCount:`{{count}} Fehler`,skippedCount:`{{count}} übersprungen`,colRow:`Zeile`,colStatus:`Status`,colColor:`Farbe`,colorResolved:`Farbe aus Katalog übernommen`,colorCrossMaterial:`Farbe von einem anderen Material übernommen — keine exakte Übereinstimmung im Katalog`,duplicateExisting:`Eine Spule mit diesem Material, dieser Marke und Farbe existiert bereits — sie wird trotzdem als neue Spule importiert`,spoolmanHint:`Im Spoolman-Modus den integrierten CSV-Import/-Export von Spoolman verwenden.`,importValidRows:`{{count}} gültige Zeilen importieren`,noValidRows:`Keine gültigen Zeilen`,importing:`Wird importiert…`,importSuccess:`{{count}} Spulen importiert`,importError:`Import fehlgeschlagen`,exportError:`Export fehlgeschlagen`},addSpool:`Spule hinzufügen`,copySpool:`Spule kopieren`,editSpool:`Spule bearbeiten`,material:`Material`,selectMaterial:`Material auswählen...`,subtype:`Untertyp`,brand:`Marke`,searchBrand:`Marke suchen...`,useCustomBrand:`"{{brand}}" verwenden`,useCustomMaterial:`Benutzerdefiniertes Material verwenden: {{material}}`,suggestedOptions:`Vorgeschlagen`,allOptions:`Alle`,colorName:`Farbname`,colorNamePlaceholder:`Jadeweiß, Feuerrot...`,color:`Farbe`,hexColor:`Hex-Farbe`,pickColor:`Benutzerdefinierte Farbe wählen`,labelWeight:`Nenngewicht`,coreWeight:`Leergewicht der Spule`,searchSpoolWeight:`Spulengewicht suchen...`,weightUsed:`Verbraucht`,currentWeight:`Restgewicht`,measuredWeight:`Gemessenes Gewicht`,spoolName:`Spule`,costPerKg:`Kosten pro kg`,storageLocation:`Lagerstandort`,temperature:`Temperatur`,humidity:`Luftfeuchtigkeit`,battery:`Batterie`,storageLocationPlaceholder:`z.B. Regal A, Schublade 1`,openInInventory:`Im Inventar öffnen`,measuredWeightError:`Das gemessene Gewicht muss zwischen {{min}}g und {{max}}g liegen.`,slicerFilament:`Slicer-Filament`,slicerFilamentName:`Slicer-Preset-Name`,slicerPreset:`Slicer-Preset`,searchPresets:`Filament-Presets suchen...`,selectedPreset:`Ausgewählt`,noPresetsFound:`Keine Presets gefunden`,tempOverrides:`Temperatur-Überschreibungen`,note:`Notiz`,notePlaceholder:`Zusätzliche Notizen zu dieser Spule...`,category:`Kategorie`,categoryPlaceholder:`z. B. Produktion, Prototyp, Kunde A`,categoryNone:`Ohne Kategorie`,storageLocationNone:`Kein Lagerort`,lowStockThresholdOverride:`Niedrigbestandsschwelle (diese Spule)`,lowStockThresholdOverrideHelp:`Leer lassen, um den globalen Schwellenwert ({{global}}%) zu verwenden.`,clearRfid:`RFID-Tag löschen`,rfidCleared:`RFID-Tag gelöscht`,archive:`Archivieren`,restore:`Wiederherstellen`,noSpools:`Noch keine Spulen. Fügen Sie Ihre erste Spule hinzu.`,noAvailableSpools:`Keine Spulen verfügbar. Fügen Sie eine Spule zum Inventar hinzu oder lösen Sie eine aus einem anderen Slot.`,kProfiles:`K-Profile`,addKProfile:`K-Profil hinzufügen`,assignSpool:`Spule zuweisen`,unassignSpool:`Zuweisung aufheben`,assignSuccess:`Spule zugewiesen und AMS-Slot konfiguriert`,assignPendingInsert:`Zugewiesen. Slot wird beim Einsetzen der Spule konfiguriert.`,assignFailed:`Spulenzuweisung fehlgeschlagen`,selectSpool:`Wählen Sie eine Spule für diesen Slot`,assigned:`Zugewiesen`,assigning:`Wird zugewiesen...`,searchSpools:`Spulen suchen...`,showAllSpools:`Alle Spulen anzeigen`,spoolmanSpools:`Spoolman-Spulen`,allMaterials:`Alle Materialien`,filterByBrand:`Nach Marke filtern...`,showArchived:`Archivierte anzeigen`,quickAdd:`Schnellerfassung (Lager)`,quantity:`Menge`,stock:`Lager`,configured:`Konfiguriert`,spoolsCreated:`{{count}} Spulen erstellt`,spoolsPartiallyCreated:`{{created}} von {{total}} Spulen erstellt (einige fehlgeschlagen)`,spoolCreated:`Spule erstellt`,spoolUpdated:`Spule aktualisiert`,spoolDeleted:`Spule gelöscht`,deepLinkSpoolNotFound:`Spule nicht gefunden`,deepLinkFetchFailed:`Spule konnte nicht geladen werden — bitte erneut versuchen`,spoolArchived:`Spule archiviert`,spoolRestored:`Spule wiederhergestellt`,kProfileSaveFailed:`K-Profil-Einstellungen konnten nicht gespeichert werden`,syncWeightSpoolNotFound:`Spule nicht gefunden — sie wurde möglicherweise gelöscht`,syncWeightSpoolmanUnreachable:`Spoolman ist nicht erreichbar — bitte später erneut versuchen`,syncWeightFailed:`Gewicht konnte nicht synchronisiert werden`,spoolmanUnreachable:`Spoolman ist nicht erreichbar — bitte später erneut versuchen`,deleteSpoolNotFound:`Spule nicht gefunden — sie wurde möglicherweise bereits gelöscht`,deleteFailed:`Spule konnte nicht gelöscht werden`,archiveSpoolNotFound:`Spule nicht gefunden — sie wurde möglicherweise bereits gelöscht`,archiveFailed:`Spule konnte nicht archiviert werden`,restoreSpoolNotFound:`Spule nicht gefunden — sie wurde möglicherweise bereits gelöscht`,restoreFailed:`Spule konnte nicht wiederhergestellt werden`,saveFailed:`Änderungen konnten nicht gespeichert werden`,tagClearFailed:`Tag konnte nicht gelöscht werden`,deleteConfirm:`Möchten Sie diese Spule wirklich löschen? Dies kann nicht rückgängig gemacht werden.`,archiveConfirm:`Möchten Sie diese Spule wirklich archivieren?`,advancedSettings:`Erweiterte Einstellungen`,filamentInfoTab:`Filament-Info`,paProfileTab:`PA-Profil`,colorAndCostTab:`Farbe & Kosten`,printersTab:`Drucker`,filamentInfo:`Filament`,additional:`Zusätzlich`,loadingPresets:`Cloud-Presets werden geladen...`,cloudConnected:`Cloud verbunden`,cloudNotConnected:`Cloud nicht verbunden (Standardwerte)`,recentColors:`Zuletzt`,searchColors:`Farben suchen...`,searchResults:`Suchergebnisse`,allColors:`Alle Farben`,commonColors:`Häufige Farben`,showLess:`Weniger`,showAll:`Alle`,noColorsFound:`Keine Farben gefunden`,noResults:`Keine Ergebnisse`,extraColorsLabel:`Zusätzliche Farben`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`2 bis 8 Hex-Stops, durch Kommas getrennt. Wird als Verlauf dargestellt.`,extraColorsInvalid:`Ungültige Hex-Werte ignoriert: {{tokens}}`,colorEffectLabel:`Effekt`,colorEffect:{none:`Keiner`,sparkle:`Glitzer`,wood:`Holz`,marble:`Marmor`,glow:`Leuchtend`,matte:`Matt`,silk:`Seide`,galaxy:`Galaxie`,rainbow:`Regenbogen`,metal:`Metallic`,translucent:`Lichtdurchlässig`,gradient:`Verlauf`,dualColor:`Zweifarbig`,triColor:`Dreifarbig`,multicolor:`Mehrfarbig`},selectMaterialFirst:`Bitte zuerst ein Material im Filament-Info Tab auswählen.`,noPrintersConfigured:`Keine Drucker konfiguriert. Fügen Sie Drucker hinzu.`,matchingFilter:`Filter`,anyBrand:`Jede Marke`,anyVariant:`Jede Variante`,autoSelect:`Auto-Auswahl`,matches:`Treffer`,match:`Treffer`,noMatches:`Keine Treffer`,connected:`Verbunden`,offline:`Offline`,printerOffline:`Drucker ist offline. Verbinden Sie ihn, um Kalibrierungsprofile anzuzeigen.`,noKProfilesMatch:`Keine K-Profile stimmen mit dem gewählten Filament überein.`,leftNozzle:`Linke Düse`,rightNozzle:`Rechte Düse`,profilesSelected:`Kalibrierungsprofil(e) ausgewählt`,filamentPreset:`Filament-Voreinstellung`,presetUseSpoolDefault:`Voreinstellung der Spule verwenden`,presetInherited:`geerbt`,presetOverride:`überschrieben`,presetNeedsModel:`Dieser Drucker hat sein Modell noch nicht gemeldet und kann daher keine eigene Voreinstellung haben.`,autoMatchPresets:`Automatisch zuordnen`,autoMatchPresetsHint:`Die Variante der Spulen-Voreinstellung suchen, die das jeweilige Modell nennt`,kProfilesPerPrinter:`K-Profile`,kProfileNotSet:`Nicht gesetzt`,kProfileFlowMismatch:`Dieses Profil wurde mit einer {{profile}}-Düse gemessen, eingebaut ist aber eine {{fitted}}-Düse — es wird daher nicht angewendet`,nozzle:`Düse`,unknownModel:`Unbekanntes Modell`,onePrinter:`1 Drucker`,nPrinters:`{{n}} Drucker`,filamentPresetsLoadFailed:`Die modellspezifischen Voreinstellungen dieser Spule konnten nicht geladen werden`,filamentPresetSaveFailed:`Die modellspezifischen Voreinstellungen konnten nicht gespeichert werden`,totalInventory:`Gesamtbestand`,totalConsumed:`Gesamtverbrauch`,byMaterial:`Nach Material`,inPrinter:`Im Drucker`,lowStock:`Niedriger Bestand`,sinceTracking:`Seit Beginn der Erfassung`,resetConsumedCounter:`Zähler zurücksetzen`,resetConsumedCounterTooltip:`Den verbrauchten Gramm-Zähler dieser Spule auf null setzen. Das Restgewicht bleibt unverändert.`,resetConsumedCounterConfirm:`Verbrauchten Gramm-Zähler dieser Spule auf 0 zurücksetzen? Künftige Drucke zählen wieder ab null. Die Spule selbst, ihre Restgewichtsberechnung und Ihre Einstellungen bleiben unverändert.`,resetAllConsumedCounters:`Alle Zähler zurücksetzen`,resetAllConsumedCountersTooltip:`Den verbrauchten Gramm-Zähler auf jeder Spule auf null setzen. Die Restgewichte bleiben unverändert.`,resetAllConsumedCountersConfirm:`Verbrauchten Gramm-Zähler auf allen {{count}} Spulen (archivierte eingeschlossen) auf 0 zurücksetzen? Das löscht den Wert „Insgesamt verbraucht“, sodass künftige Drucke wieder ab null gezählt werden. Spulen und Restgewichte bleiben unverändert.`,consumedCounterReset:`Zähler zurückgesetzt`,allConsumedCountersReset:`Zähler für {{count}} Spule(n) zurückgesetzt`,resetConsumedCounterFailed:`Zähler konnte nicht zurückgesetzt werden`,loadedInAms:`Im AMS/Ext geladen`,remaining:`Verbleibend`,weightCheck:`Gewichtskontrolle`,lastWeighed:`Zuletzt gewogen`,neverWeighed:`Nie gewogen`,search:`Spulen suchen...`,showing:`Zeige`,to:`bis`,of:`von`,show:`Zeige`,spools:`Spulen`,spool:`Spule`,page:`Seite`,noSpoolsMatch:`Keine Ergebnisse`,noSpoolsMatchDesc:`Versuchen Sie, Ihre Suche oder Filter anzupassen.`,active:`Aktiv`,archived:`Archiviert`,all:`Alle`,used:`Verwendet`,new:`Neu`,clearFilters:`Filter löschen`,table:`Tabelle`,cards:`Karten`,net:`Netto`,groupSimilar:`Gruppieren`,groupedSpools:`{{count}} identische Spulen`,groupedRows:`Zeilen`,columns:`Spalten`,configureColumns:`Spalten konfigurieren`,configureColumnsDesc:`Ziehen zum Neuordnen oder Pfeile verwenden. Sichtbarkeit mit dem Augensymbol umschalten.`,visible:`sichtbar`,reset:`Zurücksetzen`,cancel:`Abbrechen`,applyChanges:`Änderungen anwenden`,moveUp:`Nach oben`,moveDown:`Nach unten`,hideColumn:`Spalte ausblenden`,showColumn:`Spalte einblenden`,linkToSpool:`Mit Spule verknüpfen`,tagLinked:`Tag mit Spule verknüpft`,tagLinkFailed:`Tag-Verknüpfung fehlgeschlagen`,tagAlreadyLinked:`Tag bereits mit Spule #{{id}} verknüpft`,unknownTag:`Unbekannter RFID-Tag erkannt`,usageHistory:`Verbrauchshistorie`,noUsageHistory:`Noch kein Verbrauch erfasst`,printName:`Druckname`,weightConsumed:`Verbrauchtes Gewicht`,clearHistory:`Löschen`,historyCleared:`Verbrauchshistorie gelöscht`,fillSourceLabel:`(Inv)`,lowStockThresholdError:`Der Schwellenwert muss zwischen 0.1 und 99.9 liegen`,assignMismatchTitle:`Material stimmt nicht überein`,assignMismatchMessage:`Das ausgewählte Spulenmaterial "{{spoolMaterial}}" stimmt nicht mit dem Tray-Material "{{trayMaterial}}" für {{location}} überein. Trotzdem zuweisen?`,assignMismatchConfirm:`Trotzdem zuweisen`,assignPartialMismatchMessage:`Das Spulenmaterial "{{spoolMaterial}}" ist ähnlich, stimmt aber nicht genau mit "{{trayMaterial}}" in {{location}} überein. Möchten Sie fortfahren?`,assignProfileMismatchMessage:`Das Spulenprofil "{{spoolProfile}}" stimmt nicht mit dem Fachprofil "{{trayProfile}}" in {{location}} überein. Möchten Sie fortfahren?`,assignReconfigureNote:`Der AMS-Slot wird mit dem Profil der Spule neu konfiguriert.`,spoolmanFilamentCatalog:`Spoolman-Filamentkatalog`,pickFromSpoolmanCatalog:`Aus Spoolman-Katalog wählen…`,spoolmanFilamentSelected:`Filament aus Spoolman-Katalog ausgewählt`,spoolmanFilamentUnlinked:`Verknüpfung mit Filamentkatalog aufgehoben`,noSpoolmanFilaments:`Keine Filamente im Spoolman-Katalog gefunden`,spoolmanFilamentColorSwatch:`Filamentfarbe`,spoolWeightManagedBySpoolman:`Das Leerspulengewicht wird pro Filamenttyp in Spoolman verwaltet`,spoolmanCatalogLoadFailed:`Spoolman-Filamentkatalog konnte nicht geladen werden`},timelapse:{title:`Zeitraffer`,create:`Zeitraffer erstellen`,download:`Herunterladen`,delete:`Löschen`,preview:`Vorschau`,frameRate:`Bildrate`,quality:`Qualität`,processing:`Wird verarbeitet...`,noTimelapses:`Keine Zeitraffer verfügbar`},ams:{title:`AMS`,slot:`Slot`,empty:`Leer`,emptySlot:`Leerer Slot`,slotEmpty:`Leer`,slotUnconfigured:`?`,emptySlotReset:`Keine Spule zugewiesen`,unknown:`Unbekannt`,humidity:`Luftfeuchtigkeit`,temperature:`Temperatur`,filamentType:`Filamenttyp`,filamentColor:`Farbe`,remaining:`Verbleibend`,history:`AMS-Verlauf`,noHistory:`Kein Verlauf verfügbar`,configureSlot:`Slot konfigurieren`,externalSpool:`Externe Spule`,profile:`Profil`,kFactor:`K-Faktor`,kFactorShort:`K`,fill:`Füllstand`,configure:`Konfigurieren`,used:`verwendet`,remainingUnit:`verbleibend`},printModal:{variants:{editNote:`Diese Alternativen wurden beim Einreihen festgelegt. Zum Ändern abbrechen und neu einreihen.`,title:`Drucker-Alternativen`,help:`Ein Auftrag, ein Warteschlangenplatz. Der erste passende Drucker, der frei wird, druckt seine Datei.`,unknownModel:`Unbekanntes Modell`,plateFor:`Platte für {{filename}}`,moveUp:`Nach oben`,moveDown:`Nach unten`,queued:`Mit {{count}} Alternativen eingereiht`},selectPrinter:`Drucker auswählen`,selectPlate:`Platte auswählen`,filamentMapping:`Filamentzuordnung`,useArchiveMapping:`Zuordnung`,useArchiveMappingTooltip:`Jeden Steckplatz aus der mit diesem Archiv gespeicherten AMS-Zuordnung (vom Slicer) auswählen, anstatt nach Typ/Farbe abzugleichen.`,clickToChangeSlot:`Klicken, um die Steckplatzzuweisung zu ändern`,reRead:`Neu einlesen`,plateN:`Platte {{n}}`,plateFilamentsUnreadable:`Die Filamente einer ausgewählten Platte konnten nicht gelesen werden, sie lässt sich daher nicht zuordnen. Wähle sie ab, um die anderen einzureihen.`,totalCost:`Gesamtkosten:`,slotRemainingShort:` - {{grams}}g übrig`,printSettings:`Druckeinstellungen`,bedLeveling:`Bett-Nivellierung`,flowCalibration:`Fluss-Kalibrierung`,vibrationCalibration:`Vibrations-Kalibrierung`,layerInspection:`Erste-Schicht-Prüfung`,timelapse:`Zeitraffer`,cancel:`Abbrechen`,noPrintersAvailable:`Keine Drucker verfügbar`,printerBusy:`Drucker ist beschäftigt`,printerOffline:`Drucker ist offline`,sameTypeDifferentColor:`Gleicher Typ, andere Farbe`,filamentTypeNotLoaded:`Filamenttyp nicht geladen`,statusReady:`Bereit`,statusColorMismatch:`Farbe weicht ab`,statusTypeNotFound:`Typ nicht gefunden`,requiredTooltip:`Benötigt: {{name}} - {{color}}`,manuallySelected:`Manuell ausgewählt`,autoMatched:`Automatisch zugeordnet`,selectSlot:`Slot wählen`,exactColorMatch:`Exakte Farbübereinstimmung`,slotForFilament:`Drucker-Slot für {{name}}`,overrideForFilament:`Filament-Überschreibung für {{name}}`,sameTypeDifferentColorDetail:`Gleicher Typ, andere Farbe: benötigt {{required}}, im Slot ist {{loaded}}`,requiredTypeNotInPrinter:`Benötigter Filamenttyp im Drucker nicht gefunden.`,whenToPrint:`Wann drucken`,asap:`Sofort`,queue:`Warteschlange`,schedule:`Planen`,dateTime:`Datum & Uhrzeit`,invalidDateTime:`Bitte ein gültiges Datum und eine gültige Uhrzeit eingeben`,openCalendar:`Kalender öffnen`,requireManualStart:`Manuellen Start erfordern`,requirePreviousSuccess:`Nur starten, wenn der vorherige Druck erfolgreich war`,autoOffAfter:`Drucker nach Abschluss ausschalten`,helpAsap:`Der Druck wird oben in die Warteschlange eingefügt und startet, sobald ein geeigneter Drucker im Leerlauf ist.`,helpSchedule:`Der Druck startet zur geplanten Zeit, wenn der Drucker im Leerlauf ist. Wenn er belegt ist, wartet er, bis der Drucker verfügbar ist.`,helpQueue:`Der Druck wird hinten in die Warteschlange eingefügt.`,leftNozzle:`L`,rightNozzle:`R`,leftNozzleTooltip:`Linke Düse`,rightNozzleTooltip:`Rechte Düse`,ftsSameInletHint:`Alle Filamente für diesen Druck liegen an Filamentweiche IN-{{inlet}}. Wechsel zwischen Filamenten am selben Eingang dauern länger — verlege eines in ein AMS am anderen Eingang.`,rackPosition:`Wechslerposition`,rackPositionTooltip:`Welche Düse im Wechsler dieses Filament druckt. Die Positionen sind wie am Drucker nummeriert.`,rackEmptyPosition:`Diese Wechslerposition ist leer`,rackWrongNozzle:`Enthält eine {{has}}-Düse; dieses Filament benötigt {{needs}}`,filamentOverride:`Filament-Überschreibung`,filamentOverrideHint:`Filamente für modellbasierte Zuweisung optional überschreiben. Der Planer wird gegen die ausgewählten Filamente statt der ursprünglichen 3MF-Werte abgleichen.`,originalFilament:`Original`,overrideWith:`Ersetzen mit`,resetToOriginal:`Auf Original zurücksetzen`,insufficientFilamentTitle:`Nicht genug Filament`,waitingForAmsStatus:`Warte auf AMS-Status von {{printer}}…`,insufficientFilamentMessage:`Einige zugewiesene Spulen haben weniger Filament als dieser Druck benötigt:`,insufficientFilamentLine:`{{printer}} - {{slot}}: benötigt {{required}}g, verbleibend {{remaining}}g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: benötigt {{required}}g, {{remaining}}g über passende Spulen verfügbar (AMS Filament Backup)`,printAnyway:`Trotzdem drucken`,forceColorMatch:`Farbe erzwingen`,staggerPrinterStarts:`Druckerstarts staffeln`,staggerGroupSize:`Gruppengröße`,staggerInterval:`Intervall (Min.)`,staggerPreview:`{{printers}} Drucker → {{groups}} Gruppen à {{size}}, Start alle {{interval}} Min.`,staggerLastGroup:`letzte Gruppe: {{count}}`,staggerTotal:`insgesamt: {{minutes}} Min.`,staggerToPrinters:`Gestaffelt an {{count}} Drucker senden`,gcodeInjection:`Auto-Print G-code einfügen`,insufficientBudget:`Budget nicht ausreichend`,unlimitedNoBudget:`Unbegrenzt – es ist kein Budgetlimit festgelegt.`,noPrintableCostCenters:`Es ist keine aktive Kostenstelle zum Drucken verfügbar. Bitte einen Administrator, dir Druckzugriff zu gewähren.`},backup:{includesEncryptionKey:`Lokale Sicherungen enthalten die MFA-Schlüsseldatei (DATA_DIR/.mfa_encryption_key), damit ein Backup-ZIP selbstkonsistent ist. Behandle das ZIP als sensibel — wer Zugriff auf die Datei hat, kann die darin enthaltenen OIDC-Client-Secrets und TOTP-Geheimnisse entschlüsseln.`,title:`Sichern & Wiederherstellen`,createBackup:`Sicherung erstellen`,restoreBackup:`Sicherung wiederherstellen`,restoreDescription:`Alle Daten aus einer Sicherungsdatei ersetzen`,downloadBackup:`Sicherung herunterladen`,uploadBackup:`Sicherung hochladen`,lastBackup:`Letzte Sicherung`,autoBackup:`Automatische Sicherung`,backupNow:`Jetzt sichern`,restoreWarning:`Warnung: Das Wiederherstellen einer Sicherung überschreibt alle aktuellen Daten.`,includeArchives:`Archive einschließen`,includeSettings:`Einstellungen einschließen`,includeProfiles:`Profile einschließen`,backupSuccess:`Sicherung erfolgreich erstellt`,restoreSuccess:`Sicherung erfolgreich wiederhergestellt`,backupFailed:`Sicherung fehlgeschlagen`,restoreFailed:`Wiederherstellung fehlgeschlagen`,restoreNote:`Virtueller Drucker wird während der Wiederherstellung gestoppt`,githubBackup:`Git-Backup`,enabled:`Aktiviert`,cloudLoginRequired:`Bambu Cloud Login erforderlich. Melden Sie sich unter Profile → Cloud-Profile an, um GitHub-Backup zu aktivieren.`,cloudLoginRequiredShort:`Cloud-Login erforderlich`,githubDescription:`Synchronisieren Sie Ihre Profile automatisch mit einem privaten GitHub-Repository für Backup und Versionsverlauf.`,repoIsPrivate:`Repository ist privat — Sicherung möglich.`,repoIsPublicWarning:`Das Repository ist ÖFFENTLICH. Bambuddy-Backups enthalten MQTT-Zugangsdaten, Home-Assistant-Tokens, Prometheus-Tokens, Ihre Bambu-Cloud-E-Mail-Adresse und über K-Profile auch Drucker-Zugangscodes. Speichern ist blockiert, bis Sie das Repository in den Einstellungen Ihres Anbieters auf privat stellen.`,repoVisibilityUnknown:`Die Sichtbarkeit des Repositories konnte nicht bestimmt werden. Bambuddy sichert nur in Repositories, die nachweislich privat sind; Speichern wird blockiert.`,repositoryUrl:`Repository-URL`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Unsicheres HTTP erlauben`,allowInsecureHttpHint:`Für selbst gehostete Instanzen in privaten Netzwerken ohne TLS aktivieren`,personalAccessToken:`Persönlicher Zugriffstoken`,tokenSaved:`(gespeichert)`,enterNewToken:`Neuen Token eingeben zum Aktualisieren`,tokenHintGitHub:`Feingranularer Token mit Lese- und Schreibzugriff auf Contents oder klassischer Token mit dem Bereich repo.`,tokenHintGitLab:`Token mit dem Bereich api oder read_repository zusammen mit write_repository.`,tokenHintGitea:`Token mit dem Bereich write:repository.`,tokenHintForgejo:`Token mit dem Bereich write:repository. Ein Token, der nur für dieses eine Repository gilt, genügt.`,branch:`Branch`,provider:`Git-Anbieter`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Nur manuell`,hourly:`Stündlich`,daily:`Täglich`,weekly:`Wöchentlich`,includeInBackup:`In Sicherung einschließen`,kProfiles:`K-Profile`,kProfilesDescription:`Druckvorschub-Kalibrierung von verbundenen Druckern`,noPrintersConnected:`Keine Drucker verbunden`,printersConnected:`{{connected}}/{{total}} verbunden`,cloudProfiles:`Cloud-Profile`,cloudProfilesDescription:`Filament-, Drucker- und Prozessprofile aus Bambu Cloud und Orca Cloud`,cloudProfilesAccounts:`Verbundene Konten — Bambu Cloud: {{bambu}}, Orca Cloud: {{orca}}`,appSettings:`App-Einstellungen`,appSettingsDescription:`Bambuddy-Konfiguration (komplette Datenbank)`,spoolInventory:`Spulenbestand`,spoolInventoryDescription:`Filamentspulen, Nutzungsverlauf und Kostenverfolgung`,printArchives:`Druckarchive`,printArchivesDescription:`Druckverlauf-Metadaten (keine GCode/3MF-Dateien)`,lastBackupAt:`Letzte Sicherung:`,noBackupsYet:`Noch keine Sicherungen`,next:`Nächste:`,startingBackup:`Sicherung wird gestartet...`,test:`Test`,enableBackup:`Sicherung aktivieren`,testConnection:`Verbindung testen`,enterRepoUrl:`Repository-URL eingeben`,enterRepoAndToken:`Repository-URL und Zugriffstoken eingeben`,repoRequired:`Repository-URL ist erforderlich`,tokenRequired:`Zugriffstoken ist erforderlich`,githubBackupEnabled:`GitHub-Backup aktiviert`,tokenUpdated:`Token aktualisiert`,settingsSaved:`Einstellungen gespeichert`,failedToSave:`Speichern fehlgeschlagen: {{message}}`,backupCompleteFiles:`Sicherung abgeschlossen - {{count}} Dateien aktualisiert`,backupSkippedNoChanges:`Sicherung übersprungen - keine Änderungen`,backupFailed2:`Sicherung fehlgeschlagen: {{message}}`,clearedLogs:`{{count}} Protokolle gelöscht`,failedToClearLogs:`Protokolle löschen fehlgeschlagen: {{message}}`,restoreFromGit:{button:`Aus Git wiederherstellen`,title:`Aus Git-Backup wiederherstellen`,subtitle:`Commit auswählen und festlegen, was wiederhergestellt wird`,commitLabel:`Backup-Commit`,latestCommit:`Neuestes Backup (Branch-Spitze)`,categoriesLabel:`Was wiederherstellen`,inspecting:`Backup-Inhalt wird gelesen...`,itemCount:`{{count}} im Backup`,overwriteLabel:`Vorhandene Einträge überschreiben`,overwriteOn:`Vorhandene Einträge werden aus dem Backup aktualisiert.`,overwriteOff:`Es werden nur fehlende Einträge ergänzt; vorhandene bleiben unverändert.`,selectedCount:`{{count}} ausgewählt`,restoring:`Wird wiederhergestellt...`,confirmTitle:`Aus Backup wiederherstellen?`,confirmMessage:`Die ausgewählten Kategorien werden aus diesem Commit wiederhergestellt. Fehlende Einträge werden ergänzt, vorhandene bleiben unverändert.`,confirmMessageOverwrite:`Die ausgewählten Kategorien werden aus diesem Commit wiederhergestellt und lokal vorhandene Einträge überschrieben. Dies kann nicht rückgängig gemacht werden.`,kprofilesOverwriteCaveat:`K-Profile sind die Ausnahme: Das Schreiben eines Slots ersetzt immer die Kalibrierung auf dem Drucker.`,tally:`{{restored}} wiederhergestellt, {{skipped}} übersprungen, {{failed}} fehlgeschlagen`,reloadHint:`Bambuddy neu laden, damit die wiederhergestellten Daten überall erscheinen.`,partialHint:`Die oben aufgeführten Kategorien wurden abgeschlossen und sind gespeichert. Fehlende Kategorien wurden nicht ausgeführt.`,failed:`Wiederherstellung fehlgeschlagen.`,loadFailed:`Das Backup-Repository konnte nicht gelesen werden.`,details:{notPresent:`In diesem Backup-Commit nicht vorhanden`,unreadableJson:`Unlesbares JSON: {{paths}}`,settingsNoPayload:`Keine Einstellungen in den Daten`,settingsCredentialsWillSkip:`{{count}} zugangsdatenähnliche Schlüssel werden übersprungen`,settingsCompanionWillSkip:`{{count}} zugangsdatenähnliche Schlüssel werden übersprungen und {{companion}} davon abhängige Schalter bleiben aus`,settingsCompanionOnlyWillSkip:`{{companion}} Schalter bleiben aus - die dafür nötigen Zugangsdaten können nicht aus einem Backup wiederhergestellt werden`,spoolsUsageCount:`davon {{count}} Verbrauchseinträge`,archivesMetadataOnly:`Nur Metadaten - 3MF-Dateien und Vorschaubilder sind nicht im Git-Backup enthalten`,kprofilesPrinterCount:`über {{count}} Drucker`},notes:{noData:`Keine Daten dieser Art in diesem Backup`,archivesPrinterMissing:`Einige Archive verwiesen auf nicht mehr vorhandene Drucker - Verknüpfung entfernt`,archivesProjectMissing:`Einige Archive verwiesen auf nicht mehr vorhandene Projekte - Verknüpfung entfernt`,archivesOwnerCleared:`Einige Archive verwiesen auf nicht mehr vorhandene Benutzer - Eigentümer entfernt. Sie sind daher nur für Benutzer mit der Berechtigung archives:read_all sichtbar, bis ein Administrator sie neu zuweist`,archivesOwnerUnmatched:`Einige Archive nennen einen Eigentümer, den es auf dieser Instanz nicht gibt - der Eigentümer wurde entfernt statt aus der Benutzer-ID der Sicherung geraten. Sie sind daher nur für Benutzer mit der Berechtigung archives:read_all sichtbar, bis ein Administrator sie neu zuweist`,archivesOwnerUnknown:`Einige Archive wurden ohne Eigentümer wiederhergestellt - diese Sicherung enthält keinen, daher sind sie nur für Benutzer mit der Berechtigung archives:read_all sichtbar, bis ein Administrator sie neu zuweist`,archivesUndeleted:`Seit dem Backup gelöschte Archive sind wieder sichtbar - Überschreiben war aktiv`,archivesMetadataOnly:`Wiederhergestellte Archive enthalten nur Metadaten - die 3MF- und Vorschaudateien sind nicht im Git-Backup enthalten`,spoolUsageUnresolved:`{{count}} Verbrauchseinträge übersprungen - ihre Spule ist nicht in der Spulenliste dieses Backups, es gibt also nichts, woran sie hängen könnten.`,spoolUsageUnlinked:`{{count}} Verbrauchseinträge ohne Verknüpfung zum Druckverlauf wiederhergestellt - wählen Sie Druckarchive zusammen mit dem Spulenbestand, um sie zu behalten.`,spoolTagKept:`{{count}} Spulen-Tags unverändert gelassen - das Backup hätte einen inzwischen gescannten Tag gelöscht oder ihn auf eine zweite Spule verschoben.`,settingsCredentialsSkipped:`{{count}} zugangsdatenähnliche Schlüssel übersprungen - Geheimnisse bitte manuell erneut eingeben`,settingsAuthSkipped:`{{count}} Authentifizierungseinstellungen übersprungen - ändern Sie diese unter Einstellungen > Authentifizierung, damit die Aussperrprüfungen greifen`,settingsCompanionSkipped:`{{keys}} bleiben ausgeschaltet - die jeweils benötigten Zugangsdaten lassen sich nicht aus einem Backup wiederherstellen und sind auf dieser Instanz nicht hinterlegt, ein Einschalten würde die Integration also ohne Authentifizierung lassen`,settingsMqttRelayFailed:`MQTT-Einstellungen wiederhergestellt, aber das Relay konnte nicht neu verbunden werden - Bambuddy neu starten`,kprofilesAlwaysOverwrite:`K-Profile überschreiben immer den passenden Slot auf dem Drucker`,kprofilesAckUnreliable:`Ein Drucker, der nicht antwortet, zählt weiterhin als wiederhergestellt - überprüfen Sie die Profile am Drucker`,kprofilesPrinterMissing:`Kein Drucker mit der Seriennummer {{serial}} - übersprungen`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) ist nicht verbunden - übersprungen`,kprofilesUnknownNozzle:`Unerwarteter Düsendurchmesser {{nozzle}} für {{serial}} - unverändert gesendet`,kprofilesUnmatched:`{{count}} Profile für {{nozzle}} hatten kein Gegenstück auf {{printer}} - als neue Profile hinzugefügt`,kprofilesSendFailed:`{{nozzle}}-Profile konnten nicht an {{printer}} ({{serial}}) gesendet werden`,kprofilesRefused:`{{printer}} ({{serial}}) hat die {{nozzle}}-Profile abgelehnt: {{reason}}`,kprofilesStepFailed:`Der K-Profil-Schritt konnte nicht abgeschlossen werden - {{reason}}. Was zuvor wiederhergestellt wurde, ist trotzdem gespeichert.`}},history:`Verlauf`,clear:`Löschen`,date:`Datum`,status:`Status`,trigger:`Typ`,triggers:{manual:`Sicherung (manuell)`,scheduled:`Sicherung (geplant)`,restore:`Wiederherstellung`},commit:`Commit`,localBackup:`Lokale Sicherung`,localBackupDescription:`Erstellen Sie eine vollständige Sicherung Ihrer Bambuddy-Daten einschließlich Datenbank, Archive, Uploads und aller Dateien.`,downloadBackupLabel:`Sicherung herunterladen`,completeBackupZip:`Vollständige Sicherung: Datenbank + alle Dateien (ZIP)`,download:`Herunterladen`,preparingBackup:`Sicherung wird vorbereitet...`,creatingArchive:`Sicherungsarchiv wird erstellt... Dies kann bei großen Archiven eine Weile dauern.`,downloadingFile:`Sicherungsdatei wird heruntergeladen...`,backupDownloaded:`Sicherung erfolgreich heruntergeladen`,failedToCreateBackup:`Sicherung erstellen fehlgeschlagen: {{message}}`,restore:`Wiederherstellen`,restoreReplacesAll:`Wiederherstellung ersetzt alle Daten.`,restoreReplacesAllDetail:`Ihre aktuelle Datenbank und Dateien werden vollständig ersetzt. Nach der Wiederherstellung ist ein Neustart erforderlich.`,restoreConfirmTitle:`Sicherung wiederherstellen`,restoreConfirmMessage:`Sind Sie sicher, dass Sie von "{{filename}}" wiederherstellen möchten? Dies ersetzt Ihre aktuelle Datenbank und alle Dateien vollständig. Die Anwendung muss nach der Wiederherstellung neu gestartet werden.`,restoreConfirmButton:`Sicherung wiederherstellen`,uploadingFile:`Sicherungsdatei wird hochgeladen...`,backupRestoredRestart:`Sicherung wiederhergestellt. Bitte starten Sie Bambuddy neu.`,failedToRestore:`Sicherung wiederherstellen fehlgeschlagen. Bitte überprüfen Sie das Dateiformat.`,reloadNow:`Jetzt neu laden`,creatingBackup:`Sicherung erstellen`,restoringBackup:`Sicherung wiederherstellen`,preparing:`Vorbereiten...`,processing:`Verarbeiten...`,doNotClosePage:`Bitte schließen Sie diese Seite nicht und navigieren Sie nicht weg. Dieser Vorgang kann bei großen Sicherungen mehrere Minuten dauern.`,restoring:`Wiederherstellen...`,restoreComplete:`Wiederherstellung abgeschlossen`,restoreFailed2:`Wiederherstellung fehlgeschlagen`,importSettings:`Einstellungen aus einer Sicherungsdatei importieren`,pleaseWaitRestoring:`Bitte warten Sie, während Ihre Daten wiederhergestellt werden`,selectBackupFile:`Klicken Sie, um eine Sicherungsdatei auszuwählen (.json oder .zip)`,duplicateHandling:`So funktioniert die Duplikatbehandlung:`,matchPrinters:`Drucker`,matchPrintersBy:`abgeglichen nach Seriennummer`,matchSmartPlugs:`Smart Plugs`,matchSmartPlugsBy:`abgeglichen nach IP-Adresse`,matchNotificationProviders:`Benachrichtigungsanbieter`,matchNotificationProvidersBy:`abgeglichen nach Name`,matchFilaments:`Filamente`,matchFilamentsBy:`abgeglichen nach Name + Typ + Marke`,matchArchives:`Archive`,matchArchivesBy:`abgeglichen nach Inhaltshash (immer übersprungen)`,matchPendingUploads:`Ausstehende Uploads`,matchPendingUploadsBy:`abgeglichen nach Dateiname`,matchSettingsTemplates:`Einstellungen & Vorlagen`,matchSettingsTemplatesBy:`immer überschrieben`,replaceExisting:`Vorhandene Daten ersetzen`,keepExisting:`Vorhandene Daten behalten`,overwriteDescription:`Bereits vorhandene Elemente mit Sicherungsdaten überschreiben`,keepDescription:`Nur Elemente wiederherstellen, die noch nicht vorhanden sind`,overwriteCaution:`Achtung:`,overwriteWarning:`Das Überschreiben ersetzt Ihre aktuellen Konfigurationen durch Daten aus der Sicherung. Drucker-Zugangscodes werden aus Sicherheitsgründen nie überschrieben.`,cancel:`Abbrechen`,processingBackup:`Sicherungsdatei wird verarbeitet...`,itemsRestored:`Wiederhergestellt`,itemsSkipped:`Übersprungen`,restored:`Wiederhergestellt`,skippedAlreadyExist:`Übersprungen (bereits vorhanden)`,filesCategory:`Dateien (3MF, Thumbnails, etc.)`,andMore:`...und {{count}} weitere`,newApiKeysGenerated:`Neue API-Schlüssel generiert`,keysShownOnce:`Diese Schlüssel werden nur einmal angezeigt. Kopieren Sie sie jetzt!`,copy:`Kopieren`,noDataFound:`In der Sicherungsdatei wurden keine Daten zur Wiederherstellung gefunden.`,close:`Schließen`,scheduledBackup:`Geplante Backups`,scheduledBackupDescription:`Backup-Snapshots automatisch nach Zeitplan erstellen. Ausgabeverzeichnis kann auf einen NAS oder externen Speicher gemountet werden.`,frequency:`Frequenz`,backupTime:`Zeit`,retention:`Aufbewahrung`,retentionDescription:`Anzahl der zu behaltenden Backups`,outputPath:`Ausgabepfad`,outputPathPlaceholder:`Standard: {{path}}`,outputPathDescription:`Leer lassen für den Standardort`,runNow:`Jetzt ausführen`,backupFiles:`Backup-Dateien`,noScheduledBackups:`Noch keine Backups`,deleteBackup:`Löschen`,deleteBackupConfirm:`Diese Backup-Datei löschen?`,backupRunning:`Backup läuft...`,scheduledBackupComplete:`Backup erfolgreich abgeschlossen`,scheduledBackupFailed:`Backup fehlgeschlagen`,nextBackup:`Nächstes Backup`,backupSize:`Größe`,localTimeHint:`Ortszeit ({{tz}})`,defaultPathLabel:`Standard:`,pathCheck:{title:`Bambuddy kann nicht in dieses Verzeichnis schreiben`,howToFix:`So beheben Sie das:`,sandboxed:`Der Bambuddy-Dienst kann nicht nach {{path}} schreiben. Seine systemd-Unit läuft mit ProtectSystem=strict, wodurch jedes Verzeichnis außerhalb der Installations-, Daten- und Log-Verzeichnisse für den Dienst schreibgeschützt ist - auch eines, in das Sie aus Ihrer eigenen Shell schreiben können.`,read_only:`{{path}} liegt auf einem schreibgeschützten Dateisystem.`,permission_denied:`Bambuddy darf nicht nach {{path}} schreiben. Prüfen Sie Eigentümer und Rechte des Verzeichnisses.`,no_space:`Das Dateisystem, auf dem {{path}} liegt, ist voll.`,not_a_directory:`{{path}} existiert, ist aber kein Verzeichnis.`,missing:`{{path}} existiert nicht und konnte nicht angelegt werden.`,error:`Bambuddy kann nicht nach {{path}} schreiben.`,ephemeralTitle:`Diese Backups überleben einen Container-Neustart nicht`,container_ephemeral:`{{path}} liegt im Bambuddy-Container, nicht auf dem Host. Dort geschriebene Backups gehen verloren, sobald der Container neu erstellt wird. Binden Sie das Verzeichnis vom Host ein:`},categories:{settings:`Einstellungen`,notification_providers:`Benachrichtigungsanbieter`,notification_templates:`Benachrichtigungsvorlagen`,smart_plugs:`Smart Plugs`,printers:`Drucker`,filaments:`Filamente`,maintenance_types:`Wartungstypen`,archives:`Archive`,projects:`Projekte`,pending_uploads:`Ausstehende Uploads`,external_links:`Externe Links`,api_keys:`API-Schlüssel`}},tags:{title:`Tags`,addTag:`Tag hinzufügen`,editTag:`Tag bearbeiten`,deleteTag:`Tag löschen`,tagName:`Tag-Name`,tagColor:`Tag-Farbe`,noTags:`Keine Tags`,deleteConfirm:`Möchten Sie diesen Tag wirklich löschen?`,manageTags:`Tags verwalten`},uploadModal:{title:`3MF-Dateien hochladen`,dragDrop:`3MF-Dateien hierher ziehen`,or:`oder`,browseFiles:`Dateien durchsuchen`,extractionInfo:`Das Druckermodell wird automatisch aus den 3MF-Datei-Metadaten extrahiert.`,uploaded:`hochgeladen`,failed:`fehlgeschlagen`,uploading:`Wird hochgeladen...`,upload:`Hochladen`,uploadFailed:`Hochladen fehlgeschlagen`},editArchive:{title:`Archiv bearbeiten`,name:`Name`,namePlaceholder:`Druckname`,printer:`Drucker`,noPrinter:`Kein Drucker`,project:`Projekt`,noProject:`Kein Projekt`,itemsPrinted:`Gedruckte Teile`,itemsPrintedHelp:`Anzahl der in diesem Druckauftrag produzierten Teile. 0, wenn die ganze Platte unbrauchbar war.`,filamentUsed:`Verbrauchtes Filament (g)`,filamentUsedPlaceholder:`z. B. 46.16`,filamentUsedHelp:`Von Hand eintragen, wenn ein Druck ohne 3MF archiviert wurde, damit er in die Filament-Summen eingeht. Beim erneuten Einlesen eines Archivs mit 3MF wird der Wert wieder aus der Datei übernommen.`,notes:`Notizen`,notesPlaceholder:`Notizen zu diesem Druck hinzufügen...`,externalLink:`Externer Link`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Link zu Printables, Thingiverse oder anderer Quelle`,tags:`Tags`,tagsPlaceholder:`Tags hinzufügen...`,addMoreTags:`Weitere Tags hinzufügen...`,matchingTags:`Übereinstimmend mit "{{query}}"`,existingTags:`Vorhandene Tags`,clickToAdd:`(zum Hinzufügen klicken)`,status:`Status`,failureReason:`Fehlergrund`,selectReason:`Grund auswählen...`,photos:`Fotos des Druckergebnisses`,photosHelp:`Klicken Sie auf + um Fotos Ihres Druckergebnisses hinzuzufügen`,printResult:`Druckergebnis`,saving:`Wird gespeichert...`,failureReasons:{adhesionFailure:`Haftungsfehler`,spaghettiDetached:`Spaghetti / Abgelöst`,layerShift:`Schichtversatz`,cloggedNozzle:`Verstopfte Düse`,filamentRunout:`Filament aufgebraucht`,warping:`Verformung`,stringing:`Fadenziehen`,underExtrusion:`Unterextrusion`,powerFailure:`Stromausfall`,userCancelled:`Vom Benutzer abgebrochen`,noStatusUpdate:`Kein Statusupdate empfangen`,other:`Sonstiges`},statuses:{completed:`Abgeschlossen`,failed:`Fehlgeschlagen`,aborted:`Abgebrochen`,printing:`Druckt`}},kProfiles:{title:`K-Profile`,noPrintersConfigured:`Keine Drucker konfiguriert`,addPrinterInSettings:`Fügen Sie einen Drucker in den Einstellungen hinzu, um K-Profile zu verwalten`,noActivePrinters:`Keine aktiven Drucker`,enablePrinterConnection:`Aktivieren Sie eine Druckerverbindung, um K-Profile anzuzeigen`,loadingProfiles:`Lade K-Profile...`,printerOffline:`Drucker offline`,printerOfflineDesc:`Der ausgewählte Drucker ist nicht verbunden. Schalten Sie ihn ein, um K-Profile anzuzeigen.`,noMatchingProfiles:`Keine passenden Profile`,noMatchingProfilesDesc:`Keine Profile entsprechen Ihren Suchkriterien`,noKProfiles:`Keine K-Profile`,noKProfilesDesc:`Keine Druckvorschub-Profile für {{diameter}}mm Düse gefunden`,createFirstProfile:`Erstes Profil erstellen`,printer:`Drucker`,nozzle:`Düse`,refresh:`Aktualisieren`,addProfile:`Profil hinzufügen`,export:`Exportieren`,import:`Importieren`,select:`Auswählen`,selectAll:`Alle auswählen`,delete:`Löschen`,searchPlaceholder:`Nach Name oder Filament suchen...`,allExtruders:`Alle Extruder`,leftOnly:`Nur links`,rightOnly:`Nur rechts`,allFlow:`Alle Flusstypen`,hfOnly:`Nur HF`,sOnly:`Nur S`,sortName:`Sortieren: Name`,sortKValue:`Sortieren: K-Wert`,sortFilament:`Sortieren: Filament`,leftExtruder:`Linker Extruder`,rightExtruder:`Rechter Extruder`,modal:{addTitle:`K-Profil hinzufügen`,editTitle:`K-Profil bearbeiten`,profileName:`Profilname`,profileNamePlaceholder:`Mein PLA-Profil`,kValue:`K-Wert`,kValuePlaceholder:`0,020`,kValueHelp:`Typischer Bereich: 0,01 - 0,06 für PLA, 0,02 - 0,10 für PETG`,filament:`Filament`,selectFilament:`Filament auswählen...`,source:{local:`Importiert`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Integriert`},noFilamentsHelp:`Keine Filamente verfügbar. Melde dich bei Bambu Cloud an oder importiere Presets unter Profile → Lokale Profile.`,searchFilaments:`Filamente durchsuchen...`,noFilamentMatches:`Kein Filament passt zu dieser Suche`,flowType:`Flusstyp`,highFlow:`Hoher Durchfluss`,standard:`Standard`,nozzleSize:`Düsengröße`,extruder:`Extruder`,extruders:`Extruder`,left:`Links`,right:`Rechts`,notes:`Notizen (lokal gespeichert)`,notesPlaceholder:`Notizen zu diesem Profil hinzufügen...`,notesHelp:`Notizen werden in Bambuddy gespeichert, nicht auf dem Drucker`,syncing:`Synchronisiert mit Drucker...`,savingExtruder:`Speichern auf Extruder {{current}}/{{total}}...`,pleaseWait:`Bitte warten`},deleteConfirm:{title:`Profil löschen`,cannotUndo:`Dies kann nicht rückgängig gemacht werden`,message:`Möchten Sie "{{name}}" wirklich vom Drucker löschen?`},bulkDelete:{title:`Profile löschen`,cannotUndo:`Dies kann nicht rückgängig gemacht werden`,message:`Möchten Sie wirklich {{count}} ausgewählte Profile vom Drucker löschen?`},toast:{profileSaved:`K-Profil gespeichert`,profilesSaved:`K-Profil auf {{count}} Extrudern gespeichert`,selectAtLeastOneExtruder:`Bitte wählen Sie mindestens einen Extruder aus`,selectFilament:`Bitte zuerst ein Filament auswählen`,filamentNotResolvable:`Keine Bambu-Filament-ID für {{name}} — der Drucker kann dafür kein Profil speichern`,profileDeleted:`K-Profil gelöscht`,profilesDeleted:`{{count}} Profile gelöscht`,exportedProfiles:`{{count}} Profile exportiert`,importedProfiles:`{{count}} von {{total}} Profilen importiert`,noProfilesToExport:`Keine Profile zum Exportieren`,invalidFileFormat:`Ungültiges Dateiformat`,failedToParseImport:`Import-Datei konnte nicht gelesen werden`,failedToSaveBatch:`K-Profile konnten nicht gespeichert werden`,noteSaved:`Notiz gespeichert`,failedToSaveNote:`Notiz konnte nicht gespeichert werden`},permission:{noRead:`Sie haben keine Berechtigung, Profile zu aktualisieren`,noCreate:`Sie haben keine Berechtigung, Profile hinzuzufügen`,noUpdate:`Sie haben keine Berechtigung, K-Profile zu aktualisieren`,noDelete:`Sie haben keine Berechtigung, K-Profile zu löschen`,noExport:`Sie haben keine Berechtigung, Profile zu exportieren`,noImport:`Sie haben keine Berechtigung, Profile zu importieren`}},virtualPrinter:{title:`Virtueller Drucker`,running:`Läuft`,stopped:`Gestoppt`,description:{default:`Aktiviere einen virtuellen Drucker, der in Bambu Studio und OrcaSlicer erscheint. Dateien, die an diesen Drucker gesendet werden, werden direkt archiviert ohne zu drucken.`,proxy:`Aktiviere einen Proxy, der Slicer-Datenverkehr an einen echten Drucker weiterleitet, um Ferndruck über jedes Netzwerk zu ermöglichen.`},enable:{title:`Virtuellen Drucker aktivieren`,visibleInSlicer:`Sichtbar als "Bambuddy" in der Slicer-Erkennung`,proxyingTo:`Proxy zu {{name}}`,notActive:`Nicht aktiv`},model:{title:`Druckermodell`,description:`Wähle welches Druckermodell emuliert werden soll.`,restartWarning:`Das Ändern des Modells startet den virtuellen Drucker neu`},accessCode:{title:`Zugangscode`,isSet:`Zugangscode ist gesetzt`,notSet:`Kein Zugangscode gesetzt - erforderlich zum Aktivieren`,placeholder:`8-Zeichen-Code eingeben`,placeholderChange:`Neuen Code eingeben zum Ändern`,hint:`Muss genau 8 Zeichen lang sein. Wird von Slicern zur Authentifizierung verwendet.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Vom Zieldrucker übernommen`,derivedFromTargetHint:`Verwendet den Zugangscode des Zieldruckers. Die Brücke leitet die Slicer-Authentifizierung an den echten Drucker weiter, daher müssen die Codes übereinstimmen — den Druckercode in dessen Einstellungen ändern.`,reveal:`Zugangscode anzeigen`,hide:`Zugangscode verbergen`},targetPrinter:{title:`Zieldrucker`,configured:`Proxy-Ziel konfiguriert`,notConfigured:`Kein Zieldrucker ausgewählt - erforderlich für Proxy-Modus`,placeholder:`Drucker auswählen...`,hint:`Wähle den Drucker aus, an den der Slicer-Datenverkehr weitergeleitet werden soll. Der Drucker muss im LAN-Modus sein.`,noPrinters:`Keine Drucker konfiguriert. Füge zuerst einen Drucker hinzu, um den Proxy-Modus zu verwenden.`},remoteInterface:{title:`Netzwerkschnittstelle überschreiben`,configured:`Schnittstellenüberschreibung aktiv`,optional:`Optional - verwenden wenn die automatisch erkannte IP falsch ist (z.B. mehrere NICs, Docker, VPN)`,placeholder:`Automatisch erkennen (Standard)...`,hint:`Überschreibt die per SSDP beworbene und im TLS-Zertifikat verwendete IP-Adresse. Nützlich wenn Bambuddy mehrere Netzwerkschnittstellen hat.`},mode:{title:`Modus`,archive:`Archivieren`,archiveDesc:`Dateien sofort archivieren`,review:`Überprüfen`,reviewDesc:`Vor dem Archivieren überprüfen`,queue:`Warteschlange`,queueDesc:`Archivieren und zur Warteschlange hinzufügen`,proxy:`Proxy`,proxyDesc:`An echten Drucker weiterleiten`},autoDispatch:{title:`Automatisch starten`,description:`Drucke automatisch starten, wenn sie zur Warteschlange hinzugefügt werden. Wenn deaktiviert, warten Drucke auf manuellen Start.`},queueForceColorMatch:{title:`Farbabgleich erzwingen`,description:`Druckaufträge nur an Drucker senden, bei denen der genaue Filament-Typ und die genaue Farbe geladen sind. Standardmäßig deaktiviert — ohne diese Option verwendet die Warteschlange nur den Drucker-Modell-Abgleich und wählt möglicherweise einen Drucker mit der falschen Farbe.`},saveAmsMapping:{title:`AMS-Zuordnung speichern`,description:`Speichert die vom Slicer selbst gewählte AMS-Steckplatz-Zuordnung (aus dem MQTT-Befehl project_file) im Archiv, sodass ein späterer erneuter Druck dieselbe physische Spule verwendet, anstatt sie erneut aus Typ/Farbe der Datei abzuleiten. Standardmäßig deaktiviert.`},gcodeInjection:{title:`G-code-Injektion`,description:`Wendet die in den Einstellungen pro Modell konfigurierten G-code-Snippets auf Jobs dieses VP an. Standardmäßig aus.`},tailscaleDisabled:{title:`Tailscale-Integration`,description:`Aktivieren, um diesen VP als per Tailscale erreichbar zu markieren. Zeigt die Tailscale-Adresse des Hosts an, damit du weißt, welche IP du im Slicer eintragen musst. Der CA-Import bleibt unverändert — diese Option hat keinen Einfluss auf Zertifikate.`},setupRequired:{title:`Einrichtung erforderlich`,description:`Die virtuelle Druckerfunktion erfordert zusätzliche Systemkonfiguration, bevor sie funktioniert. Dies beinhaltet Portweiterleitung, Firewall-Regeln und plattformspezifische Einstellungen.`,readGuide:`Lese die Einrichtungsanleitung vor dem Aktivieren`},archiveNameSource:{title:`Quelle des Archivnamens`,description:`Lege fest, wie neue Archive benannt werden, wenn Dateien über den virtuellen Drucker eintreffen. "Metadaten" verwendet den im 3MF eingebetteten Titel des Slicers (Standard). "Dateiname" nutzt den Dateinamen, den Bambu Studio per FTP gesendet hat. Hinweis: Bambu Studio überschreibt den im Dialog "Zum Drucker senden" eingegebenen Namen mit dem Titelfeld der 3MF, sofern eines vorhanden ist — beide Modi liefern daher oft denselben Wert.`,metadata:`Metadaten`,filename:`Dateiname`},caCert:{title:`Slicer-Zertifikat`,description:`Virtuelle Drucker verwenden ein TLS-Zertifikat, das von der Bambuddy-CA signiert ist. Importieren Sie dieses CA-Zertifikat einmalig in den Vertrauensspeicher Ihres Slicers, damit er die Verbindung akzeptiert — kein Abrufen über die Kommandozeile mehr nötig.`,copy:`Kopieren`,copied:`Kopiert`,download:`Herunterladen`,fingerprint:`SHA-256`},howItWorks:{title:`So funktioniert es`,step1:`Im selben LAN erscheinen virtuelle Drucker automatisch in deinem Slicer (Bambu Studio / OrcaSlicer). Aus anderen Netzwerken füge sie manuell per IP-Adresse und Zugangscode hinzu.`,step2:`Im Archiv-, Überprüfungs- und Warteschlangen-Modus verwende die "Senden"-Funktion im Slicer, um 3MF-Dateien an Bambuddy zu senden. Der Slicer zeigt "Druck erfolgreich" — die Datei wird gespeichert, nicht gedruckt.`,step3:`Im Proxy-Modus leitet der virtuelle Drucker den gesamten Datenverkehr an einen echten Drucker weiter — Drucke starten sofort wie bei einer direkten Verbindung.`},status:{title:`Status-Details`,printerName:`Druckername`,model:`Modell`,serialNumber:`Seriennummer`,mode:`Modus`,pendingFiles:`Ausstehende Dateien`,targetPrinter:`Zieldrucker`,ftpPort:`FTP-Port`,mqttPort:`MQTT-Port`,ftpConnections:`FTP-Verbindungen`,mqttConnections:`MQTT-Verbindungen`},toast:{updated:`Virtuelle Druckereinstellungen aktualisiert`,failedToUpdate:`Einstellungen konnten nicht aktualisiert werden`,copyFailed:`Kopieren fehlgeschlagen — bitte Text manuell markieren`,accessCodeRequired:`Bitte zuerst einen Zugangscode setzen`,targetPrinterRequired:`Bitte zuerst einen Zieldrucker auswählen`,bindIpRequired:`Bitte zuerst eine Bind-IP setzen`,accessCodeEmpty:`Zugangscode darf nicht leer sein`,accessCodeLength:`Zugangscode muss genau 8 Zeichen lang sein`,targetCodeChangedRebind:`Zugangscode wurde an den neuen Zieldrucker angepasst. Bitte dieses Gerät im Slicer neu hinzufügen, damit der neue Code übernommen wird.`,created:`Virtueller Drucker erstellt`,failedToCreate:`Virtueller Drucker konnte nicht erstellt werden`,deleted:`Virtueller Drucker gelöscht`,failedToDelete:`Virtueller Drucker konnte nicht gelöscht werden`},list:{title:`Virtuelle Drucker`,add:`Hinzufügen`,addFirst:`Virtuellen Drucker hinzufügen`,empty:`Keine virtuellen Drucker konfiguriert. Fügen Sie einen hinzu, um zu beginnen.`},bindIp:{title:`Bind-Interface`,placeholder:`Interface auswählen...`,hint:`Netzwerkinterface, an das dieser virtuelle Drucker gebunden wird. Muss pro Drucker eindeutig sein.`},proxy:{accessCodeHint:`Im Proxy-Modus den Zugangscode des Zieldruckers im Slicer verwenden. Die Verbindung wird transparent zum echten Drucker weitergeleitet.`},addDialog:{title:`Virtuellen Drucker hinzufügen`,name:`Name`,hint:`Sie können Zugangscode, Zieldrucker und andere Einstellungen nach dem Erstellen konfigurieren.`,create:`Erstellen`},deleteConfirm:{title:`Virtuellen Drucker löschen`,message:`Möchten Sie "{{name}}" wirklich löschen? Dies stoppt alle Dienste für diesen Drucker.`}},modelViewer:{openInSlicer:`Im Slicer öffnen`,openInSlicerWith:`In {{slicer}} öffnen`,moreSlicerOptions:`Weitere Slicer-Optionen`,openInSlicerFailed:`Konnte nicht im Slicer öffnen`,tabs:{model:`3D-Modell`},notAvailable:`nicht verfügbar`,plates:`Platten`,allPlates:`Alle Platten`,plateNumber:`Platte {{number}}`,plateCount:`{{count}} Platte`,plateCount_other:`{{count}} Platten`,objectCount:`{{count}} Objekt`,objectCount_other:`{{count}} Objekte`,filamentCount:`{{count}} Filament`,filamentCount_other:`{{count}} Filamente`,eta:`ETA {{minutes}} Min`,noPreview:`Keine Vorschau für diese Datei verfügbar`,pagination:{pageOf:`Seite {{current}} von {{total}}`,prev:`Zurück`,next:`Weiter`},errors:{failedToLoad:`Datei konnte nicht geladen werden`,noMeshes:`Keine Meshes in 3MF-Datei gefunden`,unsupportedFormat:`Nicht unterstütztes Dateiformat`}},maintenanceDescriptions:{lubricateCarbonRods:`Schmiermittel auf Karbonstäbe für sanfte Bewegung auftragen`,lubricateRails:`Schmiermittel auf Linearschienen für sanfte Bewegung auftragen`,cleanNozzle:`Hotend und Düse reinigen, um Verstopfungen zu verhindern`,checkBelts:`Riemenspannung für präzise Drucke überprüfen`,cleanBuildPlate:`Druckplatte für bessere Haftung reinigen`,checkExtruder:`Extruderzahnräder auf Verschleiß prüfen`,checkCooling:`Sicherstellen, dass Lüfter ordnungsgemäß funktionieren`,generalInspection:`Allgemeine Druckerinspektion`,cleanCarbonRods:`Karbonstäbe reinigen, um Reibung zu reduzieren`,lubricateSteelRods:`Schmiermittel auf Stahlstangen für sanfte Bewegung auftragen`,cleanSteelRods:`Stahlstangen reinigen, um Reibung zu reduzieren`,cleanLinearRails:`Linearschienen abwischen, um Staub und Schmutz zu entfernen`,checkPtfeTube:`PTFE-Schlauch auf Verschleiß oder Beschädigung prüfen`,replaceHepaFilter:`HEPA-Filter für Luftqualität ersetzen`,replaceCarbonFilter:`Aktivkohlefilter ersetzen`,lubricateLeftNozzleRail:`Linke Düsenschiene schmieren (H2-Serie)`},haSensors:{label:`Sensoren`,unavailable:`Nicht verfügbar`,blocksPrints:`{{entity}} — hält Drucke zurück, solange der Alarm aktiv ist`,states:{open:`Offen`,closed:`Geschlossen`,unlocked:`Entriegelt`,locked:`Verriegelt`,detected:`Erkannt`,clear:`Frei`,wet:`Nass`,dry:`Trocken`,problem:`Problem`,ok:`OK`,running:`Läuft`,stopped:`Gestoppt`,on:`An`,off:`Aus`},sectionTitle:`Home-Assistant-Sensoren (Drucker)`,add:`Sensor hinzufügen`,addTitle:`Home-Assistant-Sensor hinzufügen`,editTitle:`Home-Assistant-Sensor bearbeiten`,empty:`Noch keine Sensoren. Verknüpfe einen Türkontakt oder ein Thermometer aus Home Assistant, um es auf der Druckerkarte anzuzeigen.`,unknownPrinter:`Unbekannter Drucker`,badgeBlocks:`Hält Drucke zurück`,badgeNotifies:`Benachrichtigt`,badgeHidden:`Auf Karte ausgeblendet`,printer:`Drucker`,entity:`Entität`,searchPlaceholder:`Entitäten suchen ...`,noEntities:`Keine passenden Entitäten`,name:`Anzeigename`,alertWhen:`Alarm wenn`,alertNever:`Nie — nur anzeigen`,alertAbove:`Über`,alertBelow:`Unter`,alertHint:`Der Alarmzustand hebt den Sensor auf der Druckerkarte hervor und aktiviert die Optionen unten.`,showOnCard:`Auf Druckerkarte anzeigen`,notifyOnAlert:`Benachrichtigen, sobald der Alarm ausgelöst wird`,blockPrint:`Wartende Drucke zurückhalten, solange der Alarm aktiv ist`,blockPrintHint:`Aufträge bleiben in der Warteschlange und starten von selbst, sobald der Sensor wieder frei ist. Wird ignoriert, solange Home Assistant nicht erreichbar ist.`,toast:{created:`Sensor hinzugefügt`,updated:`Sensor gespeichert`,deleted:`Sensor entfernt`},error:{pickEntity:`Wähle eine Home-Assistant-Entität`,nameRequired:`Gib einen Anzeigenamen ein`,printerRequired:`Wähle einen Drucker`,alertRequired:`Lege zuerst eine Alarmbedingung fest`}},locationHaSensors:{sectionTitle:`Home-Assistant-Sensoren (Lagerorte)`,sectionDescription:`Binden Sie Home-Assistant-Temperatur-, Luftfeuchtigkeits- oder Batteriesensoren an Ihre Lagerorte, um Live-Werte auf der Filament-Karte und in der Tabelle anzuzeigen. Pro Lagerort ist nur ein Sensor je Kategorie möglich.`,add:`Sensor hinzufügen`,addTitle:`Home-Assistant-Sensor hinzufügen`,editTitle:`Home-Assistant-Sensor bearbeiten`,empty:`Noch keine Sensoren. Verknüpfen Sie einen Temperatur- oder Feuchtigkeitssensor aus Home Assistant, um ihn auf der Filament-Karte anzuzeigen.`,unknownLocation:`Unbekannter Lagerort`,location:`Lagerort`,showOnCard:`Auf Filament-Karte anzeigen`,overwriteConfirm:{title:`Vorhandenen Sensor ersetzen?`,messageTemperature:`„{{location}}“ hat bereits einen Temperatursensor gebunden: {{name}}. Beim Fortfahren wird dieser ersetzt.`,messageHumidity:`„{{location}}“ hat bereits einen Luftfeuchtigkeitssensor gebunden: {{name}}. Beim Fortfahren wird dieser ersetzt.`,messageBattery:`„{{location}}“ hat bereits einen Batteriesensor gebunden: {{name}}. Beim Fortfahren wird dieser ersetzt.`},autoAdd:{confirmTitle:`Auch die anderen Sensoren hinzufügen?`,confirmMessage:`Bambuddy hat für diesen Lagerort auch weitere Sensoren gefunden. Wählen Sie aus, welche zusätzlich hinzugefügt werden sollen.`,added:`Zusätzlich hinzugefügt: {{names}}`,noneFound:`Keine passenden Temperatur-, Luftfeuchtigkeits- oder Batteriesensoren für diesen Lagerort gefunden.`,onlyThisOne:`Nur dieser`},options:{buttonLabel:`Sensor-Optionen`,title:`Lagerort-Sensor-Optionen`,description:`Diese Werte werden verwendet, wenn ein Temperatur-, Luftfeuchtigkeits- oder Batteriesensor automatisch mit einem Lagerort gebunden wird.`,generalSettings:`Allgemeine Einstellungen`,pollInterval:`Aktualisierungsintervall (Sekunden)`,pollIntervalHint:`Wie oft Bambuddy Home Assistant abfragt und die Sensorwerte auf dem Bildschirm aktualisiert. Minimum 60 Sekunden.`,colorizeValues:`Sensorwerte anhand ihrer Alarmschwellen farbig darstellen`,aboveColor:`Farbe für Überschreitung`,belowColor:`Farbe für Unterschreitung`,optimalColor:`Farbe für Optimalwert`,colors:{red:`Rot`,orange:`Orange`,yellow:`Gelb`,green:`Grün`,blue:`Blau`,purple:`Lila`,pink:`Magenta`},saved:`Optionen gespeichert`,saveFailed:`Optionen konnten nicht gespeichert werden`,reset:`Zurücksetzen`,resetConfirm:{title:`Alle bestehenden Lagerort-Sensoren zurücksetzen?`,message:`Dies überschreibt die Alarmschwellen, Benachrichtigungen und Kartensichtbarkeit aller bestehenden Temperatur-, Luftfeuchtigkeits- und Batteriesensoren von Lagerorten mit den oben festgelegten Werten und setzt den Namen jedes Sensors auf seinen Home-Assistant-Anzeigenamen zurück – Drucker-Sensoren sind davon nicht betroffen. Dies kann nicht rückgängig gemacht werden. Je nach Anzahl der Sensoren kann dies einen Moment dauern.`},resetDone:`Auf {{count}} Lagerort-Sensoren angewendet`,resetFailed:`Zurücksetzen der Lagerort-Sensoren fehlgeschlagen`},deleteAllConfirm:{title:`Alle Sensoren löschen?`,message:`Dadurch werden alle {{count}} Sensoren entfernt, die an „{{location}}“ gebunden sind. Dies kann nicht rückgängig gemacht werden.`},currentlyBound:`Aktuell gebunden: {{entity}}`,error:{locationRequired:`Wählen Sie einen Lagerort`},toast:{created:`Sensor hinzugefügt`,updated:`Sensor gespeichert`,deleted:`Sensor entfernt`}},smartPlugs:{offline:`Offline`,admin:`Admin`,openPlugAdminPage:`Plug-Admin-Seite öffnen`,deleteSmartPlug:`Smart Plug löschen`,turnOnSmartPlug:`Smart Plug einschalten`,turnOffSmartPlug:`Smart Plug ausschalten`,turnOn:`Einschalten`,turnOff:`Ausschalten`,addSmartPlug:{scanningNetwork:`Netzwerk wird durchsucht...`,chooseEntity:`Entität auswählen...`,connectionFailed:`Verbindung fehlgeschlagen`,searchEntities:`Entitäten suchen...`,searchPowerSensors:`Leistungssensoren suchen...`,searchEnergySensors:`Energiesensoren suchen...`,placeholders:{plugName:`Wohnzimmer Steckdose`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Gleich wie Leistungs-Topic oder anders`}},linkedTo:`Verbunden mit:`,monitorOnly:`Nur Überwachung`,alerts:`Alarme`,scheduleOn:`Ein {{time}}`,scheduleOff:`Aus {{time}}`,on:`Ein`,off:`Aus`,power:`Leistung`,kwhToday:`kWh Heute`,settings:`Einstellungen`,automationSettings:`Automatisierungseinstellungen`,showInSwitchbar:`In Schaltleiste anzeigen`,quickAccessSidebar:`Schnellzugriff über Seitenleiste`,enabled:`Aktiviert`,enableAutomation:`Automatisierung für diesen Stecker aktivieren`,autoOn:`Auto Ein`,autoOnDescription:`Einschalten wenn Druck startet`,autoOff:`Auto Aus`,autoOffDescription:`Ausschalten wenn Druck abgeschlossen (einmalig)`,autoOffPersistent:`Aktiviert lassen`,autoOffPersistentDescription:`Zwischen Drucken aktiviert bleiben statt einmalig`,controlsPrinterPower:`Versorgt den Drucker`,controlsPrinterPowerDescription:`Deaktivieren, wenn diese Steckdose nur Zubehör versorgt (Filterlüfter, Licht). Sonst wird der Drucker beim Ausschalten als offline markiert.`,autoOffAfterDrying:`Automatisch aus nach Trocknung`,autoOffAfterDryingDescription:`Ausschalten, wenn AMS-Trocknung abgeschlossen ist`,delayAfterDryingMinutes:`Verzögerung nach Trocknung (Minuten)`,turnOffDelayMode:`Ausschaltverzögerungsmodus`,time:`Zeit`,temp:`Temp.`,delayMinutes:`Verzögerung (Minuten)`,tempThreshold:`Temperaturschwelle (°C)`,tempThresholdDescription:`Schaltet aus wenn die Düse unter diese Temperatur abkühlt`,edit:`Bearbeiten`,deleteConfirm:`Möchten Sie "{{name}}" wirklich löschen? Dies kann nicht rückgängig gemacht werden.`,turnOnConfirm:`Möchten Sie "{{name}}" wirklich einschalten?`,turnOffConfirm:`Möchten Sie "{{name}}" wirklich ausschalten? Dies unterbricht die Stromversorgung des angeschlossenen Geräts.`,failedToTurn:`{{name}}" konnte nicht {{action}} werden`,unknown:`Unbekannt`,addTitle:`Smart Plug hinzufügen`,editTitle:`Smart Plug bearbeiten`,stopScanning:`Suche beenden`,discoverTasmota:`Tasmota Geräte suchen`,foundDevices:`{{count}} Gerät(e) gefunden - zum Auswählen klicken:`,noDevicesFound:`Keine Tasmota Geräte in Ihrem Netzwerk gefunden`,haNotConfigured:`Home Assistant ist nicht konfiguriert. Einrichtung unter`,haSettingsPath:`Einstellungen → Netzwerk → Home Assistant`,selectEntity:`Entität auswählen *`,ipAddress:`IP-Adresse *`,nameLabel:`Name *`,username:`Benutzername`,password:`Passwort`,authHint:`Leer lassen, wenn Ihr Tasmota-Gerät keine Authentifizierung benötigt`,linkToPrinter:`Mit Drucker verbinden`,noPrinter:`Kein Drucker (nur manuelle Steuerung)`,linkingDescription:`Verknüpfung ermöglicht automatisches Ein-/Ausschalten bei Druckstart/-ende`,powerAlerts:`Leistungsalarme`,alertAbove:`Alarm wenn über (W)`,alertBelow:`Alarm wenn unter (W)`,alertDescription:`Benachrichtigung wenn der Stromverbrauch diese Schwellenwerte überschreitet. Leer lassen um diese Richtung zu deaktivieren.`,dailySchedule:`Tagesplan`,turnOnAt:`Einschalten um`,turnOffAt:`Ausschalten um`,scheduleDescription:`Den Stecker automatisch täglich zu diesen Zeiten ein-/ausschalten. Leer lassen um diese Aktion zu überspringen.`,showOnPrinterCard:`Auf Druckerkarte anzeigen`,displayOnPrinterCard:`Schaltfläche auf Druckerkarte anzeigen`,connectedResult:`Verbunden!`,deviceLabel:`Gerät: {{name}} - `,stateLabel:`Status: {{state}}`,test:`Test`,delete:`Löschen`,save:`Speichern`,add:`Hinzufügen`,cancel:`Abbrechen`,failedToStartScan:`Suche konnte nicht gestartet werden`,nameRequired:`Name ist erforderlich`,entityRequired:`Entität ist für Home Assistant Stecker erforderlich`,mqttTopicRequired:`Mindestens ein MQTT-Topic muss für Leistung, Energie oder Statusüberwachung konfiguriert sein`,loadingEntities:`Entitäten werden geladen...`,loading:`Laden...`,failedToLoadEntities:`Entitäten konnten nicht geladen werden: {{error}}`,noEntitiesMatching:`Keine Entitäten gefunden die "{{search}}" entsprechen`,noEntitiesAvailable:`Keine Entitäten verfügbar`,searchingEntities:`Alle Entitäten durchsuchen ({{count}} gefunden)`,showingEntities:`Zeige switch, light, input_boolean ({{count}} verfügbar)`,energyMonitoringOptional:`Energieüberwachung (Optional)`,energyMonitoringHint:`Sensoren suchen und auswählen, die Leistungs-/Energiedaten liefern.`,powerSensorW:`Leistungssensor (W)`,energyTodayKwh:`Energie Heute (kWh)`,totalEnergyKwh:`Gesamtenergie (kWh)`,noMatchingSensors:`Keine passenden Sensoren`,none:`Keine`,mqttNotConfigured:`MQTT-Broker nicht konfiguriert. Broker-Adresse einstellen unter`,mqttSettingsPath:`Einstellungen → Netzwerk → MQTT-Veröffentlichung`,mqttNotConfiguredSuffix:`(Sie müssen die Veröffentlichung nicht aktivieren, nur die Broker-Details ausfüllen).`,mqttMonitorOnlyDescription:`MQTT-Stecker empfangen Leistungs-/Energiedaten über MQTT-Abonnement. Ein-/Ausschalten ist nicht verfügbar - verwenden Sie Ihren MQTT-Broker oder Ihr Home-Automation-System.`,powerMonitoring:`Leistungsüberwachung`,energyMonitoring:`Energieüberwachung`,stateMonitoring:`Statusüberwachung`,optional:`optional`,topic:`Thema`,jsonPath:`JSON-Pfad`,multiplier:`Multiplikator`,onValue:`EIN-Wert`,mqttPowerHint:`JSON-Pfad extrahiert Wert aus JSON-Payload (z.B. "power_l1"). Leer lassen wenn Topic rohe numerische Werte sendet.
 Multiplikator 0.001 für mW→W, 1000 für kW→W verwenden.`,mqttEnergyHint:`JSON-Pfad extrahiert Wert aus JSON-Payload. Leer lassen für rohe Werte.
 Multiplikator 0.001 für Wh→kWh, 1000 für MWh→kWh verwenden.`,mqttStateHint:`JSON-Pfad extrahiert Wert aus JSON-Payload. Leer lassen für rohe Werte.
-EIN-Wert: der genaue String der "EIN" bedeutet. Leer lassen für Auto-Erkennung (ON, true, 1).`,restControl:`Steuerung`,restOnUrl:`Einschalt-URL`,restOffUrl:`Ausschalt-URL`,restOnBody:`EIN-Anforderungstext`,restOffBody:`AUS-Anforderungstext`,restMethod:`HTTP-Methode`,restHeaders:`Custom Headers (JSON)`,restStatusUrl:`Status-URL`,restStatusPath:`JSON-Pfad für Status`,restStatusOnValue:`EIN-Wert`,restPowerUrl:`Strom-URL`,restPowerPath:`JSON-Pfad für Leistung`,restPowerMultiplier:`Power Multiplikator`,restEnergyUrl:`Energie URL`,restEnergyPath:`JSON-Pfad für Energie (heute)`,restEnergyTotalPath:`JSON-Pfad für Energie (Gesamtzähler)`,restEnergyTotalMultiplier:`Multiplikator Gesamtzähler`,restEnergyTotalPathHint:`z.B. aenergy.total`,restEnergyTotalHint:`Viele Steckdosen — darunter alle Shellys — liefern nur einen Gesamtzähler, der nie zurückgesetzt wird. Er gehört hierher, nicht in das Feld darüber: als Tagesverbrauch gelesen würde er um Mitternacht nie zurückspringen, und Gestern und Gesamt blieben leer. Bambuddy errechnet Heute und Gestern daraus, wofür ein bis zwei Tage an Messwerten nötig sind. Ein Shelly liefert Wattstunden, also Multiplikator 0.001 verwenden.`,restEnergyMultiplier:`Energie Multiplikator`,restUrlRequired:`Mindestens eine URL (ON oder OFF) ist für REST-Steckdosen erforderlich`,restHeadersHint:`z. B. {"Authorization": "Bearer your-token"}`,restBodyHint:`z. B. ON, {"state": "on"}`,restStatusHint:`URL zum Abfragen des aktuellen Status`,restPathHint:`z. B. state oder data.power.status`,restPowerUrlHint:`Eigene URL für Leistungsdaten (nutzt Status URL wenn leer)`,restEnergyUrlHint:`Eigene URL für Energiedaten (nutzt Status URL wenn leer)`,restEnergyHint:`Jeder Wert kann eine eigene URL verwenden oder auf die Status URL zurückgreifen. Multiplikatoren für Einheitenumrechnung verwenden (z.B. 0.001 für Wh zu kWh).`,testConnection:`Verbindung testen`,connectionSuccess:`Verbindung erfolgreich`,noSwitchesInSwitchbar:`Keine Schalter in der Schaltleiste`,enableSwitchbarHint:`"In Schaltleiste anzeigen" unter Einstellungen > Smart Plugs aktivieren`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`E-Mail`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`SMTP-E-Mail-Benachrichtigungen`,telegram:`Benachrichtigungen über Telegram-Bot`,discord:`An Discord-Kanal per Webhook senden`,ntfy:`Kostenlose, selbst-hostbare Push-Benachrichtigungen`,pushover:`Einfache, zuverlässige Push-Benachrichtigungen`,callmebot:`Kostenlose WhatsApp-Benachrichtigungen über CallMeBot`,webhook:`Generischer HTTP-POST an beliebige URL`,homeassistant:`Dauerhafte Benachrichtigungen im Home Assistant Dashboard`,bark:`iOS-Push-Benachrichtigungen über Bark (selbst hostbar)`},lastSuccess:`Zuletzt: {{date}}`,error:`Fehler`,printer:`Drucker:`,allPrinters:`Alle Drucker`,sendTestNotification:`Testbenachrichtigung senden`,eventSettings:`Ereigniseinstellungen`,enabled:`Aktiviert`,sendFromProvider:`Benachrichtigungen von diesem Anbieter senden`,printEvents:`Druckereignisse`,printerStatus:`Druckerstatus`,amsAlarms:`AMS-Alarme`,amsHtAlarms:`AMS-HT-Alarme`,printQueue:`Druckwarteschlange`,start:`Start`,plateCheck:`Plattenkontrolle`,complete:`Abgeschlossen`,failed:`Fehlgeschlagen`,stopped:`Gestoppt`,progress:`Fortschritt`,offline:`Offline`,lowFilament:`Filament niedrig`,maintenance:`Wartung`,amsHumidity:`AMS-Feuchtigkeit`,amsTemp:`AMS-Temperatur`,amsDryingSuspended:`Trocknung ausgesetzt`,amsHtHumidity:`AMS-HT-Feuchtigkeit`,amsHtTemp:`AMS-HT-Temperatur`,bedCooled:`Bett abgekühlt`,firstLayer:`Erste Schicht`,quiet:`Ruhe`,digest:`Zusammenfassung {{time}}`,printStarted:`Druck gestartet`,plateNotEmpty:`Platte nicht leer`,plateNotEmptyDescription:`Objekte vor dem Druck erkannt`,plateClearRequired:`Platte freigeben`,plateClearRequiredDescription:`Druck beendet, Warteschlange wartet auf Bestätigung`,plateClear:`Platte freigeben`,printCompleted:`Druck abgeschlossen`,bedCooledLabel:`Bett abgekühlt`,bedCooledDescription:`Bett nach dem Druck unter Schwellenwert abgekühlt`,firstLayerCompleteLabel:`Erste Schicht fertig`,firstLayerCompleteDescription:`Benachrichtigung mit Foto nach erster Schicht`,missingSpoolAssignmentLabel:`Fehlende Spulenzuordnung`,billingChargeFailedLabel:`Abrechnungsfehler`,billingChargeFailedDescription:`Benachrichtigen, wenn Druckkosten nicht verbucht werden konnten`,missingSpoolAssignmentDescription:`Benachrichtigen, wenn ein Druck startet und benoetigte Schaechte keine zugeordnete Spule haben`,printFailed:`Druck fehlgeschlagen`,printStopped:`Druck gestoppt`,progressMilestones:`Fortschrittsmeilensteine`,progressMilestonesDescription:`Benachrichtigung bei 25%, 50%, 75%`,printerOffline:`Drucker offline`,printerError:`Druckerfehler`,aiFailureDetection:`KI-Fehlererkennung`,aiFailureDetectionDescription:`Benachrichtigen, wenn die Obico-KI einen möglichen Druckfehler erkennt`,lowFilamentLabel:`Filament niedrig`,maintenanceDue:`Wartung fällig`,maintenanceDueDescription:`Benachrichtigen, wenn Wartung erforderlich ist`,amsHumidityHigh:`AMS-Feuchtigkeit hoch`,amsHumidityHighDescription:`Normale AMS-Feuchtigkeit überschreitet Schwellenwert`,amsTemperatureHigh:`AMS-Temperatur hoch`,amsTemperatureHighDescription:`Normale AMS-Temperatur überschreitet Schwellenwert`,amsDryingSuspendedTitle:`Automatische Trocknung ausgesetzt`,amsDryingSuspendedDescription:`Automatische Trocknung wurde für eine AMS-Einheit aufgegeben, weil die Luftfeuchtigkeit nie unter den Schwellenwert fiel`,amsHtHumidityHigh:`AMS-HT-Feuchtigkeit hoch`,amsHtHumidityHighDescription:`AMS-HT-Feuchtigkeit überschreitet Schwellenwert`,amsHtTemperatureHigh:`AMS-HT-Temperatur hoch`,amsHtTemperatureHighDescription:`AMS-HT-Temperatur überschreitet Schwellenwert`,inventoryAlerts:`Bestandswarnungen`,stockReorderAlert:`Nachbestellungswarnung`,stockReorderAlertDescription:`SKU hat seinen Nachbestellungspunkt erreicht`,stockBreakAlert:`Bestandsunterbrechungswarnung`,stockBreakAlertDescription:`Der Bestand wird vor dem Eintreffen der Nachbestellung aufgebraucht sein`,jobAdded:`Auftrag hinzugefügt`,jobAddedDescription:`Auftrag zur Warteschlange hinzugefügt`,jobAssigned:`Auftrag zugewiesen`,jobAssignedDescription:`Modellbasierter Auftrag einem Drucker zugewiesen`,jobStarted:`Auftrag gestartet`,jobStartedDescription:`Warteschlangenauftrag hat Druck begonnen`,jobWaiting:`Auftrag wartet`,jobWaitingDescription:`Auftrag wartet auf Filament oder Drucker`,jobSkipped:`Auftrag übersprungen`,jobSkippedDescription:`Auftrag übersprungen (vorheriger fehlgeschlagen)`,jobFailed:`Auftrag fehlgeschlagen`,jobFailedDescription:`Auftrag konnte nicht gestartet werden`,queueComplete:`Warteschlange abgeschlossen`,queueCompleteDescription:`Alle Warteschlangenaufträge beendet`,quietHours:`Ruhezeiten`,noNotificationsDuring:`Keine Benachrichtigungen während dieser Zeiten`,editProviderToChangeQuietHours:`Anbieter bearbeiten, um Ruhezeiten zu ändern`,dailyDigest:`Tägliche Zusammenfassung`,batchNotifications:`Benachrichtigungen zu einer täglichen Zusammenfassung bündeln`,sendAt:`Senden um {{time}}`,editProviderToChangeDigestTime:`Anbieter bearbeiten, um Zusammenfassungszeit zu ändern`,edit:`Bearbeiten`,deleteProvider:`Benachrichtigungsanbieter löschen`,deleteConfirm:`Sind Sie sicher, dass Sie "{{name}}" löschen möchten? Dies kann nicht rückgängig gemacht werden.`,delete:`Löschen`,addTitle:`Benachrichtigungsanbieter hinzufügen`,editTitle:`Benachrichtigungsanbieter bearbeiten`,nameLabel:`Name *`,namePlaceholder:`Meine Benachrichtigungen`,providerTypeLabel:`Anbietertyp *`,configuration:`Konfiguration`,testConfiguration:`Konfiguration testen`,printerFilter:`Druckerfilter`,onlyFromPrinter:`Nur Benachrichtigungen für Ereignisse von diesem Drucker senden`,quietHoursDnd:`Ruhezeiten (Nicht stören)`,quietStart:`Start`,quietEnd:`Ende`,dailyDigestLabel:`Tägliche Zusammenfassung`,sendDigestAt:`Zusammenfassung senden um`,digestCollected:`Ereignisse werden gesammelt und als einzelne Zusammenfassung zu dieser Zeit gesendet`,notificationEvents:`Benachrichtigungsereignisse`,progressPercent:`(25 %, 50 %, 75 %)`,bedCooledAfterPrint:`(nach Druckabschluss)`,haSensorAlert:`Drucker-Sensor-Alarm`,haSensorAlertDescription:`(ein verknüpfter Home-Assistant-Sensor braucht Aufmerksamkeit)`,locationHaSensorAlert:`Lagerort-Sensor-Alarm`,locationHaSensorAlertDescription:`(ein mit einem Lagerort verknüpfter Home-Assistant-Sensor braucht Aufmerksamkeit)`,eventPriority:{sectionTitle:`ntfy-Priorität`,helpNtfy:`Wähle eine Priorität pro aktiviertem Ereignis. ntfy nutzt diese, um Hinweise (Ton, Sichtbarkeit, Push-Verhalten) zu eskalieren. Hier nicht gesetzte Stufen verwenden den ntfy-Server-Standard.`,min:`Min.`,low:`Niedrig`,default:`Standard`,high:`Hoch`,urgent:`Dringend`},cancel:`Abbrechen`,save:`Speichern`,add:`Hinzufügen`,nameRequired:`Name ist erforderlich`,fieldRequired:`{{field}} ist erforderlich`,haDataInvalid:`Das Datenfeld muss ein gültiges JSON-Objekt sein, z. B. {"priority": "high", "ttl": 0}`,phoneNumber:`Telefonnummer`,apiKey:`API-Schlüssel`,serverUrl:`Server-URL`,topic:`Thema`,authToken:`Auth-Token`,userKey:`Benutzerschlüssel`,appToken:`App-Token`,priority:`Priorität`,pushoverRetry:`Notfall-Wiederholung (s)`,pushoverExpire:`Notfall-Ablauf (s)`,botToken:`Bot-Token`,chatId:`Chat-ID`,telegramThreadId:`Forum-Themen-ID`,telegramThreadIdHelp:`Optional. Sendet in ein einzelnes Thema einer Forum-Gruppe — die letzte Zahl im Themen-Link (t.me/c/.../25). Leer lassen für das allgemeine Thema.`,telegramThreadIdInvalid:`Die Forum-Themen-ID muss eine Zahl sein.`,smtpServer:`SMTP-Server`,smtpPort:`SMTP-Port`,security:`Sicherheit`,authentication:`Authentifizierung`,username:`Benutzername`,password:`Passwort`,fromEmail:`Absender-E-Mail`,toEmail:`Empfänger-E-Mail`,webhookUrl:`Webhook-URL`,payloadFormat:`Payload-Format`,authorization:`Autorisierung`,titleFieldName:`Titel-Feldname`,messageFieldName:`Nachrichten-Feldname`,editTemplate:`Vorlage bearbeiten: {{name}}`,titleLabel:`Titel`,bodyLabel:`Inhalt`,titlePlaceholder:`Benachrichtigungstitel...`,bodyPlaceholder:`Benachrichtigungsinhalt...`,availableVariables:`Verfügbare Variablen`,clickToInsert:`Klicken, um an Cursorposition im Inhalt einzufügen`,livePreview:`Live-Vorschau`,hide:`Ausblenden`,show:`Anzeigen`,loadingPreview:`Vorschau wird geladen...`,enterTemplateContent:`Vorlageninhalt eingeben, um Vorschau zu sehen`,titlePreview:`Titel:`,bodyPreview:`Inhalt:`,resetToDefault:`Auf Standard zurücksetzen`,titleRequired:`Titel ist erforderlich`,bodyRequired:`Inhalt ist erforderlich`,notificationLog:`Benachrichtigungsprotokoll`,showFailedOnly:`Nur fehlgeschlagene`,last24Hours:`Letzte 24 Stunden`,last7Days:`Letzte 7 Tage`,last30Days:`Letzte 30 Tage`,last90Days:`Letzte 90 Tage`,justNow:`Gerade eben`,noFailedNotifications:`Keine fehlgeschlagenen Benachrichtigungen`,noNotificationsLogged:`Keine Benachrichtigungen protokolliert`,unknownProvider:`Unbekannter Anbieter`,logTitle:`Titel`,logMessage:`Nachricht`,logError:`Fehler`,logProvider:`Anbieter: {{type}}`,logTime:`Zeit: {{time}}`,refresh:`Aktualisieren`,clearOld:`Alte löschen`,statsSummary:`Letzte {{days}} Tage:`,statsNotifications:`Benachrichtigungen`,statsSent:`{{count}} gesendet`,statsFailed:`{{count}} fehlgeschlagen`,eventTypes:{print_start:`Druck gestartet`,print_complete:`Druck abgeschlossen`,print_failed:`Druck fehlgeschlagen`,print_stopped:`Druck gestoppt`,print_progress:`Fortschritt`,printer_offline:`Drucker offline`,printer_error:`Druckerfehler`,filament_low:`Filament niedrig`,maintenance_due:`Wartung fällig`,test:`Test`},userEmail:{title:`Benachrichtigungen`,emailNotifications:`E-Mail-Benachrichtigungen`,emailNotificationsDesc:`Erhalten Sie E-Mail-Benachrichtigungen für Ihre eigenen Druckaufträge. E-Mails werden über die in der erweiterten Authentifizierung konfigurierten SMTP-Einstellungen gesendet.`,sendingTo:`Benachrichtigungen werden gesendet an`,noEmailWarning:`Ihr Konto hat keine E-Mail-Adresse. Wenden Sie sich an einen Administrator, um eine hinzuzufügen.`,printJobNotifications:`Druckauftrags-Benachrichtigungen`,printJobNotificationsDesc:`Wählen Sie aus, welche Ereignisse E-Mail-Benachrichtigungen für von Ihnen gesendete Druckaufträge auslösen.`,printJobStarts:`Druckauftrag startet`,printJobStartsDesc:`Benachrichtigt werden, wenn Ihr Druckauftrag beginnt.`,printJobFinishes:`Druckauftrag fertig`,printJobFinishesDesc:`Benachrichtigt werden, wenn Ihr Druckauftrag erfolgreich abgeschlossen wurde.`,printErrors:`Druckfehler`,printErrorsDesc:`Benachrichtigt werden, wenn Ihr Druckauftrag fehlschlägt oder auf einen Fehler stößt.`,printJobStops:`Druckauftrag gestoppt`,printJobStopsDesc:`Benachrichtigt werden, wenn Ihr Druckauftrag abgebrochen oder gestoppt wird.`,saveSuccess:`Benachrichtigungseinstellungen gespeichert.`,saveError:`Benachrichtigungseinstellungen konnten nicht gespeichert werden.`}},richTextEditor:{bold:`Fett`,italic:`Kursiv`,underline:`Unterstrichen`,bulletList:`Aufzählungsliste`,numberedList:`Nummerierte Liste`,alignLeft:`Linksbündig`,alignCenter:`Zentriert`,alignRight:`Rechtsbündig`,addLink:`Link hinzufügen`,removeLink:`Link entfernen`},externalLinks:{title:`Seitenleisten-Links`,sidebarLayout:`Seitenleiste`,sidebarLayoutDescription:`Integrierte Seiten ein- oder ausblenden, externe Links hinzufügen und Elemente ziehen, um die Seitenleisten-Navigation neu zu ordnen.`,systemPages:`Bambuddy-Seiten`,externalLinks:`Externe Links`,visibleInSidebar:`In Seitenleiste sichtbar`,hiddenFromSidebar:`In Seitenleiste ausgeblendet`,requiredInSidebar:`In Seitenleiste erforderlich`,hidePage:`Seite ausblenden`,showPage:`Seite anzeigen`,settingsCannotBeHidden:`Einstellungen können nicht ausgeblendet werden`,noLinksConfigured:`Keine externen Links konfiguriert`,deleteLink:`Link löschen`,removeCustomIcon:`Benutzerdefiniertes Symbol entfernen`,openInNewTab:`In neuem Tab öffnen`,placeholders:{linkName:`Mein Link`}},keyboardShortcuts:{title:`Tastaturkürzel`,navigation:`Navigation`,archivesSection:`Archive`,kProfilesSection:`K-Profile`,generalSection:`Allgemein`,shortcuts:{goToPrinters:`Zu Drucker gehen`,goToArchives:`Zu Archiv gehen`,goToQueue:`Zur Warteschlange gehen`,goToStats:`Zu Statistiken gehen`,goToProfiles:`Zu Cloud-Profilen gehen`,goToSettings:`Zu Einstellungen gehen`,focusSearch:`Suche fokussieren`,openUploadModal:`Upload-Modal öffnen`,clearSelection:`Auswahl löschen / Eingabe aufheben`,contextMenu:`Kontextmenü auf Karten`,refreshProfiles:`Profile aktualisieren`,newProfile:`Neues Profil`,exitSelectionMode:`Auswahlmodus beenden`,showHelp:`Diese Hilfe anzeigen`},footer:`Drücken Sie Esc oder klicken Sie außerhalb, um zu schließen`},notificationLog:{title:`Benachrichtigungsprotokoll`,events:{printStarted:`Druck gestartet`,printComplete:`Druck abgeschlossen`,printFailed:`Druck fehlgeschlagen`,printStopped:`Druck gestoppt`,progress:`Fortschritt`,printerOffline:`Drucker offline`,printerError:`Druckerfehler`,lowFilament:`Wenig Filament`,maintenanceDue:`Wartung fällig`,test:`Test`},timeAgo:{justNow:`Gerade eben`,minutesAgo:`vor {{minutes}}m`,hoursAgo:`vor {{hours}}h`}},restoreBackup:{title:`Backup wiederherstellen`,restoring:`Wird wiederhergestellt...`,restoreComplete:`Wiederherstellung abgeschlossen`,restoreFailed:`Wiederherstellung fehlgeschlagen`,importSettings:`Einstellungen aus Backup-Datei importieren`,pleaseWait:`Bitte warten Sie, während Ihre Daten wiederhergestellt werden`,clickToSelect:`Klicken Sie, um Backup-Datei auszuwählen (.json oder .zip)`,howDuplicateHandling:`So funktioniert die Duplikatbehandlung:`,categories:{printers:`Drucker`,smartPlugs:`Smart Plugs`,notificationProviders:`Benachrichtigungsanbieter`,filaments:`Filamente`,archives:`Archive`,pendingUploads:`Ausstehende Uploads`,settingsTemplates:`Einstellungen & Vorlagen`},matchingInfo:{printers:`abgeglichen nach Seriennummer`,smartPlugs:`abgeglichen nach IP-Adresse`,notificationProviders:`abgeglichen nach Name`,filaments:`abgeglichen nach Name + Typ + Marke`,archives:`abgeglichen nach Inhalts-Hash`,pendingUploads:`abgeglichen nach Dateiname`,settingsTemplates:`immer überschrieben`},replaceExisting:`Vorhandene Daten ersetzen`,keepExisting:`Vorhandene Daten behalten`,replaceDescription:`Bereits vorhandene Elemente mit Backup-Daten überschreiben`,keepDescription:`Nur Elemente wiederherstellen, die noch nicht existieren`,caution:`Vorsicht:`,cautionText:`Das Überschreiben ersetzt Ihre aktuellen Konfigurationen durch Backup-Daten. Drucker-Zugangscodes werden aus Sicherheitsgründen niemals überschrieben.`,itemsRestored:`Wiederhergestellte Elemente`,itemsSkipped:`Übersprungene Elemente`,restored:`Wiederhergestellt`,skipped:`Übersprungen (existieren bereits)`,filesLabel:`Dateien (3MF, Thumbnails, etc.)`,newApiKeysGenerated:`Neue API-Schlüssel generiert`,newApiKeysWarning:`Diese Schlüssel werden nur einmal angezeigt. Kopieren Sie sie jetzt!`,processingBackup:`Backup-Datei wird verarbeitet...`,noDataFound:`In der Backup-Datei wurden keine wiederherzustellenden Daten gefunden.`,failedToRestore:`Backup konnte nicht wiederhergestellt werden. Bitte überprüfen Sie das Dateiformat.`},backupExport:{title:`Backup exportieren`,selectData:`Zu exportierende Daten auswählen`,selectAll:`Alle auswählen`,selectNone:`Keine auswählen`,categoryDescriptions:{settings:`Sprache, Theme, Update-Einstellungen`,notifications:`ntfy, Pushover, Discord, usw.`,templates:`Benutzerdefinierte Nachrichtenvorlagen`,smartPlugs:`Tasmota-Plug-Konfigurationen`,externalLinks:`Seitenleiste Links zu externen Diensten`,printers:`Druckerinformationen (Zugangscodes ausgeschlossen)`,plateDetection:`Leere Platten-Referenzbilder`,filaments:`Filamenttypen und -kosten`,maintenance:`Benutzerdefinierte Wartungspläne`,archives:`Alle Druckdaten + Dateien (3MF, Thumbnails, Fotos)`,projects:`Projekte, BOM-Elemente und Anhänge`,pendingUploads:`Virtueller Drucker-Uploads zur Überprüfung`,apiKeys:`Webhook-API-Schlüssel (neue Schlüssel bei Import generiert)`},requiresPrinters:`Drucker müssen ausgewählt sein`,zipFileWarning:`ZIP-Datei wird erstellt.`,zipFileDescription:`Enthält alle 3MF-Dateien, Thumbnails, Zeitraffer und Fotos. Dies kann eine Weile dauern und zu einer großen Datei führen.`,includeAccessCodes:`Zugangscodes einschließen`,includeAccessCodesDescription:`Für die Übertragung auf eine andere Maschine`,includeAccessCodesWarning:`Zugangscodes werden im Klartext eingeschlossen. Bewahren Sie diese Backup-Datei sicher auf!`,categoriesSelected:`{{selectedCount}} Kategorien ausgewählt`},pendingUploads:{placeholders:{notes:`Notizen zu diesem Druck hinzufügen...`},discardUpload:`Upload verwerfen`,archiveAllUploads:`Alle Uploads archivieren`,discardAllUploads:`Alle Uploads verwerfen`,archive:`Archivieren`,timeAgo:{justNow:`Gerade eben`,minutesAgo:`vor {{minutes}}m`,hoursAgo:`vor {{hours}}h`,daysAgo:`vor {{days}}d`}},apiBrowser:{placeholders:{requestBody:`JSON-Anforderungstext...`,searchEndpoints:`Endpunkte suchen...`}},configureAmsSlot:{title:`AMS-Slot konfigurieren`,slotConfigured:`Slot konfiguriert!`,configuringSlot:`Slot wird konfiguriert:`,slotLabel:`{{ams}} – Slot {{slot}}`,searchPresets:`Voreinstellungen suchen...`,colorPlaceholder:`Farbname oder Hex (z.B. braun, FF8800)`,clearCustomColor:`Benutzerdefinierte Farbe löschen`,noCloudPresets:`Keine Cloud-Voreinstellungen. Melden Sie sich bei Bambu Cloud an, um zu synchronisieren.`,noPresetsAvailable:`Keine Voreinstellungen verfügbar. Melden Sie sich bei Bambu Cloud an oder importieren Sie lokale Profile.`,noMatchingPresets:`Keine passenden Voreinstellungen gefunden.`,custom:`Benutzerdefiniert`,builtin:`Integriert`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Einstellungen an Drucker gesendet`,filamentProfile:`Filamentprofil`,kProfileLabel:`K-Profil (Pressure Advance)`,filteringFor:`Filtern nach: {{material}}`,noKProfile:`Kein K-Profil (Standard 0.020 verwenden)`,noMatchingKProfiles:`Keine passenden K-Profile gefunden. Standard K=0.020 wird verwendet.`,otherKProfiles:`Weitere K-Profile auf diesem Drucker`,selectFilamentFirst:`Zuerst ein Filamentprofil auswählen`,kFromCalibration:`K={{value}} aus Druckerkalibrierung`,customColorLabel:`Benutzerdefinierte Farbe (optional)`,presetColors:`{{name}} Farben:`,showLessColors:`Weniger Farben anzeigen`,showMoreColors:`Mehr Farben anzeigen`,clear:`Löschen`,hexLabel:`Hex – #{{hex}}`,resetting:`Wird zurückgesetzt...`,resetSlot:`Slot zurücksetzen`,cancel:`Abbrechen`,configuring:`Wird konfiguriert...`,configureSlot:`Slot konfigurieren`},githubBackup:{title:`Git-Backup`,history:`Verlauf`,downloadBackup:`Backup herunterladen`,restoreBackup:`Backup wiederherstellen`,noBackupsYet:`Noch keine Backups`},emailSettings:{placeholders:{fromName:`Bambuddy`}},tagManagement:{searchTags:`Tags suchen...`,renameTag:`Tag umbenennen`,deleteTag:`Tag löschen`},notificationTemplates:{placeholders:{title:`Benachrichtigungstitel...`,body:`Benachrichtigungstext...`}},batchTag:{placeholders:{newTag:`Neuen Tag eingeben...`}},photoGallery:{deletePhoto:`Foto löschen`},filamentHoverCard:{copySpoolUuid:`Spulen-UUID kopieren`},kProfilesView:{hasNote:`Hat Notiz`,copyProfile:`Profil kopieren`},layout:{openMenu:`Menü öffnen`,noPermissionSystemInfo:`Sie haben keine Berechtigung zum Anzeigen von Systeminformationen`},dashboard:{dragToReorder:`Ziehen zum Neuordnen`,hideWidget:`Widget ausblenden`},notificationProviderCard:{deleteNotificationProvider:`Benachrichtigungsanbieter löschen`},fileManagerModal:{closeFileManager:`Dateimanager schließen`,sortFiles:`Dateien sortieren`,goToParentFolder:`Zum übergeordneten Ordner gehen`,threeView:`3D-Ansicht`},embeddedCameraViewer:{refreshStream:`Stream aktualisieren`,close:`Schließen`,zoomOut:`Verkleinern`,resetZoom:`Zoom zurücksetzen`,zoomIn:`Vergrößern`,dragToResize:`Ziehen zum Größe ändern`},timelapseViewer:{skipBack5s:`5s zurückspringen`,skipForward5s:`5s vorspringen`},notificationProviders:{descriptions:{email:`SMTP-E-Mail-Benachrichtigungen`,telegram:`Benachrichtigungen über Telegram-Bot`,discord:`An Discord-Kanal über Webhook senden`,ntfy:`Kostenlose, selbst hostbare Push-Benachrichtigungen`,pushover:`Einfache, zuverlässige Push-Benachrichtigungen`,callmebot:`Kostenlose WhatsApp-Benachrichtigungen über CallMeBot`,webhook:`Generischer HTTP POST zu beliebiger URL`}},logViewer:{searchPlaceholder:`Nachricht oder Logger-Name suchen...`,noLogEntries:`Keine Logeinträge gefunden`},switchbarPopover:{noSwitchesInSwitchbar:`Keine Schalter in Schalterleiste`},projectPageModal:{placeholders:{title:`Titel`,designer:`Designer`,license:`Lizenz`,description:`Beschreibung eingeben...`,profileTitle:`Profil-Titel`,profileDescription:`Profilbeschreibung...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`Wartend`,justNow:`Gerade eben`,now:`Jetzt`,minsAgo:`vor {{count}}m`,inMins:`in {{count}}min`,hoursAgo:`vor {{count}}h`,inHours:`in {{count}}Std`,daysAgo:`vor {{count}}d`,inDays:`in {{count}}T`},spoolbuddy:{nav:{dashboard:`Übersicht`,ams:`AMS`,inventory:`Inventar`,writeTag:`Schreiben`,settings:`Einstellungen`},status:{nfcReady:`NFC bereit`,nfcOff:`NFC aus`,offline:`Offline`,online:`Online`,noPrinters:`Keine Drucker`,deviceOffline:`Gerät offline`,waitingConnection:`Warte auf Geräteverbindung...`,systemReady:`System bereit`,status:`Status`},dashboard:{readyToScan:`Bereit zum Scannen`,idleMessage:`Spule auf die Waage legen zum Identifizieren`,nfcHint:`NFC-Tag wird automatisch gelesen`,device:`Gerät`,syncWeight:`Gewicht sync.`,weightSynced:`Synchronisiert!`,unknownTag:`Unbekannter Tag`,newTag:`Neuer Tag erkannt`,onScale:`auf der Waage`,linkSpool:`Mit Spule verknüpfen`,linkTagTitle:`Tag mit Spule verknüpfen`,linkTag:`Tag verknüpfen`,selectSpool:`Spule zum Verknüpfen auswählen:`,noUntagged:`Keine Spulen ohne Tags gefunden`,tagDetected:`Tag erkannt`,noTag:`Kein Tag`,tagId:`Tag`,grossWeight:`Bruttogewicht`,spoolSize:`Spulengröße`,close:`Schließen`,currentSpool:`Aktuelle Spule`,plateReady:`Druckplatte bereit: {{name}}`,plateReadyLabel:`Bereit-zum-Quittieren-Liste`,plateClearAction:`Frei`,plateClearedToast:`Druckplatte als geleert markiert`,plateClearFailed:`Druckplatte konnte nicht als geleert markiert werden`},modal:{spoolDetected:`Spule erkannt`,assignToAms:`AMS zuweisen`,syncWeight:`Gewicht sync.`,weightSynced:`Synchronisiert!`,syncing:`Synchronisiere...`,newTagDetected:`Neuer Tag erkannt`,addToInventory:`Zum Inventar hinzufügen`,assignToAmsTitle:`AMS zuweisen`,selectSlot:`Slot auswählen`,assign:`Zuweisen`,assigning:`Zuweisen...`,assignSuccess:`Zugewiesen!`,assignPendingInsert:`Zugewiesen. Slot wird beim Einsetzen der Spule konfiguriert.`,assignError:`Fehler beim Zuweisen. Bitte erneut versuchen.`,noPrinterSelected:`Drucker auswählen...`,noAmsDetected:`Kein AMS an diesem Drucker erkannt`,slot:`Slot`},weight:{noReading:`Kein Messwert`,stable:`Stabil`,measuring:`Messen...`,tare:`Tarieren`,calibrate:`Kalibrieren`},spool:{remaining:`Verbleibend`,material:`Material`,brand:`Marke`,color:`Farbe`,coreWeight:`Kern`,labelWeight:`Etikett`,scaleWeight:`Waage`,netWeight:`Netto`,lastUsed:`Zuletzt verwendet`,unknownColor:`Unbekannte Farbe`},ams:{noData:`Kein AMS erkannt`,connectAms:`AMS anschließen um Filament-Slots zu sehen`,noPrinter:`Kein Drucker ausgewählt`,selectPrinter:`Drucker in der oberen Leiste auswählen`,printerDisconnected:`Drucker getrennt`,humidity:`Feuchtigkeit`,level:`Stufe`,active:`Aktiv`,slot:`Slot`,empty:`Leer`},inventory:{search:`Spulen suchen...`,empty:`Keine Spulen im Inventar`,noResults:`Keine passenden Spulen`,spools:`Spulen`,addSpool:`Spule hinzufügen`},settings:{tabDevice:`Gerät`,tabDisplay:`Anzeige`,tabScale:`Waage`,tabUpdates:`Aktualisierungen`,nfcReader:`NFC-Leser`,type:`Typ`,connection:`Verbindung`,notConnected:`N/V`,deviceInfo:`Geräteinfo`,hostname:`Host`,uptime:`Betriebszeit`,systemConfig:`Backend & Auth`,backendUrl:`Bambuddy Backend URL`,apiToken:`API-Token`,apiTokenPlaceholder:`API-Token eingeben`,saveConfig:`Konfiguration speichern`,systemQueued:`Konfiguration in Warteschlange.`,nfcDiagnostic:`NFC-Diagnose`,scaleDiagnostic:`Waagen-Diagnose`,readTagDiagnostic:`Tag-Lese-Diagnose`,testNfc:`Leser testen`,testScale:`Genauigkeit testen`,testReadTag:`Tag lesen`,systemFieldsRequired:`Backend-URL ist erforderlich.`,brightness:`Helligkeit`,saved:`Gespeichert`,noBacklight:`Keine DSI-Hintergrundbeleuchtung erkannt. Helligkeitssteuerung erfordert ein DSI-Display.`,screenBlank:`Bildschirm-Abschaltzeit`,screenBlankDesc:`Bildschirm schaltet sich nach Inaktivität ab. Zum Aufwecken berühren.`,displayNote:`Helligkeit wird als Software-Filter angewendet.`,scaleCalibration:`Waagen-Kalibrierung`,currentWeight:`Aktuelles Gewicht`,tareOffset:`Tara`,calFactor:`Faktor`,knownWeight:`Bekanntes Gewicht`,calStep1:`Alle Gegenstände von der Waage entfernen und Nullpunkt setzen.`,calStep2:`Bekanntes Gewicht auf die Waage legen.`,setZero:`Nullpunkt setzen`,calibrateNow:`Kalibrieren`,calibrated:`Kalibriert`,tareSet:`Tara-Befehl gesendet. Warte auf Gerät...`,tareComplete:`Tara abgeschlossen!`,tareTimedOut:`Tara-Zeitüberschreitung — läuft der SpoolBuddy-Daemon?`,tareFailed:`Tara-Befehl fehlgeschlagen`,zeroSet:`Nullpunkt gesetzt. Bekanntes Gewicht auf die Waage legen.`,calibrationDone:`Kalibrierung abgeschlossen!`,calibrationFailed:`Kalibrierung fehlgeschlagen`,lastCalibrated:`Zuletzt kalibriert`,stable:`Stabil`,settling:`Stabilisierung...`,firmware:`Firmware`,scale:`Waage`,noDevice:`Kein SpoolBuddy-Gerät gefunden`,daemonVersion:`Daemon-Version`,currentVersion:`Aktuell`,versionPending:`Warte auf Daemon...`,checking:`Prüfe...`,checkUpdates:`Nach Updates suchen`,updateAvailable:`Update verfügbar`,updateInstructions:`Update per SSH: SpoolBuddy-Installationsskript ausführen.`,upToDate:`Aktuell`,includeBeta:`Beta-Versionen einschließen`},writeTag:{tabExisting:`Vorhandene Spule`,tabNew:`Neue Spule`,tabReplace:`Tag ersetzen`,searchPlaceholder:`Suche nach Material, Farbe, Marke...`,noUntaggedSpools:`Keine Spulen ohne Tags`,noTaggedSpools:`Keine Spulen mit Tags`,selectSpool:`Spule auswählen, dann einen NTAG auf den Leser legen`,placeTag:`NTAG auf den Leser legen`,tagReady:`Tag erkannt — bereit zum Schreiben`,writeTag:`Tag beschreiben`,replaceTag:`Tag ersetzen`,writing:`Tag wird beschrieben...`,waiting:`Warte auf SpoolBuddy...`,writeSuccess:`Tag erfolgreich beschrieben!`,writeFailed:`Schreiben fehlgeschlagen`,queueFailed:`Schreibbefehl konnte nicht eingereiht werden`,tryAgain:`Erneut versuchen`,cancel:`Abbrechen`,replaceWarning:`Alter Tag wird getrennt. Neuer Tag ersetzt ihn.`,deviceOffline:`SpoolBuddy ist offline`,material:`Material`,colorName:`Farbname`,color:`Farbe`,brand:`Marke`,weight:`Gewicht (g)`,createSpool:`Spule erstellen`,creating:`Wird erstellt...`,spoolCreated:`Spule erstellt! Bereit zum Schreiben.`,createFailed:`Spule konnte nicht erstellt werden`,incompleteDataWarning:`Tag mit unvollständigen Spoolman-Daten geschrieben`},quickMenu:{printerPower:`Drucker-Strom`,systemControls:`System`,restartDaemon:`Daemon neustarten`,restartBrowser:`Browser neustarten`,reboot:`Neustart`,shutdown:`Herunterfahren`,swipeToClose:`Nach unten wischen zum Schließen`,confirmTitle:`Bestätigen`,confirmShutdown:`Möchten Sie das SpoolBuddy wirklich herunterfahren? Sie benötigen physischen Zugang, um es wieder einzuschalten.`,confirmReboot:`Möchten Sie das SpoolBuddy wirklich neu starten?`,confirmRestartDaemon:`SpoolBuddy-Daemon neustarten? NFC und Waage sind vorübergehend nicht verfügbar.`,confirmRestartBrowser:`Kiosk-Browser neustarten? Das Display wird kurz schwarz.`,confirm:`Bestätigen`,confirmPlugOn:`{{name}} einschalten?`,confirmPlugOff:`{{name}} ausschalten?`,turnOn:`Einschalten`,turnOff:`Ausschalten`}},diagnostic:{modalTitle:`Verbindungsdiagnose — {{name}}`,running:`Diagnose läuft...`,runningElapsed:`Diagnose läuft... ({{elapsed}}s)`,waitingForReportHint:`Warten darauf, dass der Drucker einen Statusbericht sendet — kann bis zu {{max}} Sekunden dauern.`,runFailed:`Diagnose konnte nicht ausgeführt werden: {{error}}`,retry:`Erneut ausführen`,runButton:`Diagnose ausführen`,sectionTitle:`Verbindungsdiagnose`,sectionDescription:`Prüfen, warum ein Drucker keine Verbindung herstellt oder nicht druckt — Port-Erreichbarkeit, LAN-Entwicklermodus, Docker-Netzwerkmodus und Zugangsdaten.`,noPrinters:`Keine Drucker konfiguriert.`,overall:{ok:`Keine Probleme gefunden — die Druckerverbindung sieht gut aus.`,warnings:`Der Drucker sollte funktionieren, aber einige Punkte erfordern Aufmerksamkeit.`,problems:`Probleme gefunden, die erklären, warum der Drucker keine Verbindung herstellt oder nicht druckt.`},check:{port_mqtt:{title:`Steuerungsport (MQTT 8883)`,pass:`Erreichbar — der Drucker akzeptiert Steuerungsverbindungen.`,fail:`Port 8883 ist nicht erreichbar. Der Drucker ist ausgeschaltet, hat eine andere IP-Adresse oder eine Firewall blockiert ihn. Überprüfen Sie die Drucker-IP und dass nichts Port 8883 blockiert.`},port_ftps:{title:`Dateiübertragungsport (FTPS 990)`,pass:`Erreichbar — das Senden von Druckdateien funktioniert.`,warn:`Port 990 ist nicht erreichbar. Die Überwachung funktioniert möglicherweise weiterhin, aber das Senden von Drucken an den Drucker schlägt fehl. Stellen Sie sicher, dass Port 990 nicht blockiert ist.`,warn_no_tls:`Port 990 ist offen, aber der Dateidienst des Druckers schließt den TLS-Handshake nicht ab. Druckdateien, Vorschaubilder und Zeitraffer können nicht abgerufen werden, daher bleiben Archive leer. Starten Sie den Drucker neu — den Port freizugeben hilft hier nicht.`},external_storage:{title:`Gesendete Dateien auf externem Speicher speichern (Installationsschritt 4)`,pass:`Der Drucker meldet, dass diese Option aktiv ist — gesendete Dateien werden auf der SD-Karte gespeichert und Archive enthalten Vorschaubilder und Slicer-Metadaten.`,fail:`Der Drucker meldet, dass diese Option deaktiviert ist. Aktivieren Sie "Gesendete Dateien auf externem Speicher speichern" — bei neuer Firmware (P2S 01.02 / Bambu Studio 2.6+) liegt der Schalter in den Druckeinstellungen des Druckers, bei älteren Versionen im Geräte-Tab von Bambu Studio / OrcaSlicer. Ohne diese Option fehlen jedem archivierten Druck Vorschaubild und Slicer-Metadaten.`,skip:`Nicht geprüft — eine aktive MQTT-Verbindung ist erforderlich. Bei älteren Slicern, in denen diese Einstellung nur im Slicer existiert, meldet sie der Drucker nicht — diese Prüfung besteht auch dann, wenn die Option deaktiviert ist. Prüfen Sie Installationsschritt 4 in diesem Fall manuell.`,skip_unsupported_model:`Dieses Modell hat einen SD-Slot, aber keine Möglichkeit, die Option zu aktivieren — die aktuelle P1-Firmware zeigt den Schalter in Bambu Studio nicht an und der Drucker hat kein Display. Hier gibt es nichts zu beheben; archivierten Drucken fehlen möglicherweise Vorschaubilder und Slicer-Metadaten, bis Bambu Lab dies per Firmware unterstützt.`,fail_no_media:`Die Option ist aktiviert, aber der Drucker meldet weder Karte noch Stick im Steckplatz, daher können gesendete Dateien nirgends abgelegt werden. Legen Sie einen ein und drucken Sie erneut — bis dahin fehlen jedem archivierten Druck Vorschaubild und Slicer-Metadaten.`,warn_internal_storage:`Die Option ist aktiviert und ein Speicher ist vorhanden, aber der letzte Druck landete dennoch im internen Speicher des Druckers, den Bambuddy nicht lesen kann. Bei der H2-Serie, dem P2S und dem X2D sendet die Schaltfläche "Drucken" in Bambu Studio unabhängig von dieser Option immer dorthin. Drucke werden mit Namen und Zeiten archiviert, aber ohne Vorschaubild und Slicer-Metadaten. Für vollständige Archive den Druck aus Bambuddy starten oder in OrcaSlicer slicen — oder in Bambu Studio "Senden" mit "Extern" verwenden und den Druck danach starten.`,warn_internal_history:`Die Option ist aktiv und Speicher vorhanden, aber der letzte Druck lief aus einer Datei, die bereits auf dem Drucker lag — ein erneuter Druck über sein Display, ein Start aus Handy oder eine früher gesendete Datei. Diese Bibliothek liegt im internen Speicher, den Bambuddy nicht lesen kann, und keine Einstellung ändert das, denn für diesen Druck wurde nichts gesendet. Er wird weiterhin mit Namen und Zeiten archiviert, nur ohne Vorschaubild und Slicer-Metadaten. Für vollständige Archive Drucke aus Bambuddy starten oder aus dem Slicer senden.`},port_rtsps:{title:`Kameraport ({{protocol}} {{port}})`,pass:`Erreichbar — der Kamerastream funktioniert.`,warn:`Port {{port}} ist nicht erreichbar. Die Live-Kameraansicht funktioniert nicht. Dies betrifft das Drucken nicht.`},macos_local_network:{title:`macOS-Berechtigung „Lokales Netzwerk“`,pass:`macOS erlaubt Bambuddy den Zugriff auf das lokale Netzwerk.`,warn_unsigned:`Das Python, das Bambuddy ausführt, hat keine Code-Signatur. Damit hat macOS nichts, woran es die Berechtigung „Lokales Netzwerk“ binden könnte, und verwirft jede Verbindung zum Drucker stillschweigend — ohne Fehler und ohne Nachfrage. Führe das Bambuddy-Update-Skript (install/update_macos.sh) aus, das die Signatur setzt, und starte Bambuddy anschließend neu. Interpreter: {{executable}}`,warn_permission:`Wenn der Drucker eingeschaltet und unter dieser Adresse erreichbar ist, öffne Systemeinstellungen > Datenschutz & Sicherheit > Lokales Netzwerk und stelle sicher, dass das Python von Bambuddy aktiviert ist. macOS verwirft lokale Verbindungen sonst stillschweigend, und ein Python-Update kann die alte Berechtigung zurücklassen.`},network_mode:{title:`Container-Netzwerkmodus`,genericRuntime:`einem Container`,pass:`Läuft in {{runtime}} mit Host-Netzwerk.`,warn:`Bambuddy läuft in {{runtime}} mit Bridge-Netzwerk. Die Druckererkennung und der virtuelle Drucker benötigen den Host-Netzwerkmodus — erstellen Sie den Container mit Host-Netzwerk neu ("network_mode: host" in docker-compose, "--network=host" bei Podman).`,skip:`Läuft nicht in einem Container — nicht zutreffend.`,skip_unknown:`Bambuddy läuft in {{runtime}}, der Netzwerkmodus konnte jedoch nicht ermittelt werden. Falls die Druckererkennung oder der virtuelle Drucker nicht funktionieren, erstellen Sie den Container mit Host-Netzwerk neu.`,skip_system_container:`Bambuddy läuft in einem {{runtime}}-Systemcontainer, der wie eine virtuelle Maschine direkt im LAN liegt — nicht zutreffend.`},subnet:{title:`Netzwerk-Subnetz`,pass:`Drucker und Bambuddy befinden sich im selben Subnetz.`,warn:`Der Drucker ({{printer_ip}}) und Bambuddy ({{host_ip}}) befinden sich in unterschiedlichen Subnetzen. Sie können sich möglicherweise nicht erreichen, sofern kein Routing zwischen den Subnetzen konfiguriert ist.`,skip:`Subnetz konnte nicht ermittelt werden — übersprungen.`},mqtt_auth:{title:`Drucker-Zugangsdaten`,pass:`Der Drucker hat die Verbindung akzeptiert.`,fail:`Der Drucker ist erreichbar, aber Bambuddy ist nicht mit ihm verbunden. Höchstwahrscheinlich ist der Zugangscode oder die Seriennummer falsch — der Zugangscode ändert sich bei jedem Umschalten von „Nur LAN“ oder des Entwicklermodus, kopieren Sie ihn also erneut vom Druckerbildschirm. Ein Drucker, der gerade neu startet oder bereits die maximale Anzahl gleichzeitiger Verbindungen erreicht hat, sieht genauso aus.`,fail_auth_rejected:`Der Drucker hat die Zugangsdaten von Bambuddy abgelehnt. Der Zugangscode oder die Seriennummer ist falsch — der Zugangscode ändert sich bei jedem Umschalten von „Nur LAN“ oder des Entwicklermodus. Kopieren Sie ihn erneut vom Druckerbildschirm und speichern Sie ihn in den Druckereinstellungen.`,skip:`Nicht geprüft — der Drucker konnte nicht erreicht werden.`},developer_mode:{title:`LAN-Entwicklermodus`,pass:`Der Entwicklermodus ist aktiviert.`,fail:`Der Entwicklermodus ist am Drucker AUS. Aktivieren Sie ihn in den LAN-Einstellungen des Druckers — und bestätigen Sie mit OK. Ohne ihn starten Drucke nicht.`,skip:`Konnte nicht geprüft werden — erfordert eine aktive Verbindung zum Drucker.`},printer_publishing:{title:`Drucker sendet Statusmeldungen`,pass:`Der Drucker sendet Statusmeldungen — AMS, Filamente und K-Profile werden korrekt zum Slicer gespiegelt.`,fail:`Der MQTT-Broker hat die Verbindung akzeptiert, der Drucker sendet aber keine Statusmeldungen. Fast immer liegt eine falsche oder falsch geschriebene Seriennummer vor — das Topic device/<serial>/report unterscheidet Groß- und Kleinschreibung. Prüfen Sie die Seriennummer in den Druckereinstellungen gegen die Anzeige am Drucker.`,skip:`Konnte nicht geprüft werden — erfordert eine aktive Verbindung zum Drucker.`}}},systemHealth:{sectionTitle:`Systemzustand`,sectionDescription:`Durchsucht aktuelle Logs nach bekannten Problemen, die du meist selbst beheben kannst, bevor daraus ein Support-Ticket wird.`,rescan:`Erneut prüfen`,clean:`Keine bekannten Probleme in den letzten {{times}} Log-Einträgen gefunden.`,logUnavailable:`Die Protokollierung in Dateien ist deaktiviert, daher können keine Logs durchsucht werden. Aktiviere die Datei-Protokollierung, um diese Prüfung zu nutzen.`,learnMore:`Lösung anzeigen`,fixLabel:`Lösung:`,occurrences:`{{times}}× aufgetreten — zuletzt um {{lastSeen}}`,category:{layer8:`Das kannst du beheben`,environment:`Umgebung`,bug:`Bitte melden`},signature:{"ftp-auth-rejected":{name:`Drucker hat den Zugriffscode abgelehnt`,cause:`Der Drucker hat die Anmeldung für die Dateiübertragung abgelehnt. Der Zugriffscode ist falsch oder hat sich nach dem Umschalten des Entwicklermodus geändert.`,fix:`Kopiere den Zugriffscode erneut vom Druckerbildschirm (LAN-Einstellungen) und aktualisiere ihn in den Druckereinstellungen in Bambuddy.`},"ftp-connection-timeout":{name:`Zeitüberschreitung bei der Dateiübertragung`,cause:`Bambuddy konnte den Dateiübertragungs-Port des Druckers (FTPS 990) nicht erreichen. Der Port ist blockiert, oder der Drucker ist aus oder in einem anderen Subnetz.`,fix:`Stelle sicher, dass Port 990 zwischen Bambuddy und dem Drucker nicht blockiert wird und beide im selben Netzwerk sind.`},"ftp-ssl-error":{name:`Sicherer Dateiübertragungs-Handshake fehlgeschlagen`,cause:`Der Dateidienst des Druckers antwortet auf Port 990 ohne TLS. Sein Dateiserver hat sich aufgehängt — ein Fehler im Drucker, kein Firewall- oder Firmware-Problem.`,fix:`Starte den Drucker neu. Bis dahin lassen sich Druckdateien, Vorschaubilder und Timelapses nicht abrufen; das Drucken selbst ist nicht betroffen.`},"bambu-cloud-captcha":{name:`Bambu Cloud verlangt ein CAPTCHA`,cause:`Der Missbrauchsschutz von Bambu prüft dieses Netzwerk, daher kann keine Bambu-Cloud-Anmeldung abgeschlossen werden. Das hängt an der öffentlichen IP-Adresse, nicht an deinem Konto oder dieser Installation.`,fix:`Warte ab — normalerweise löst es sich innerhalb weniger Stunden, wiederholte Anmeldeversuche verlängern es. Zwischenzeitlich kannst du dich mit einem Zugriffstoken aus einer Browser-Sitzung anmelden.`},"mqtt-connection-flapping":{name:`Druckerverbindung bricht ständig ab`,cause:`Die Steuerverbindung (MQTT 8883) trennt und verbindet sich wiederholt — meist wegen einer schwachen Netzwerkverbindung oder eines teilweise blockierten Ports.`,fix:`Prüfe das WLAN-Signal am Drucker, bevorzuge eine Kabelverbindung und stelle sicher, dass Port 8883 zuverlässig erreichbar ist.`},"camera-connection-refused":{name:`Kamera-Stream nicht erreichbar`,cause:`Die Live-Kamera war auf Port RTSPS 322 nicht erreichbar. Der Port ist blockiert, oder die Kamera bzw. die LAN-Liveansicht ist am Drucker deaktiviert.`,fix:`Aktiviere Kamera und LAN-Liveansicht am Drucker und stelle sicher, dass Port 322 nicht blockiert ist. Das Drucken ist davon nicht betroffen.`},"database-locked":{name:`Datenbank-Schreibkonflikte`,cause:`Die SQLite-Datenbank meldet unter Last "database is locked"-Fehler — häufig beim Betrieb mehrerer Drucker gleichzeitig.`,fix:`Stelle Bambuddy auf eine externe PostgreSQL-Datenbank um. Siehe die PostgreSQL-Anleitung in der Dokumentation.`}}},vpDiagnostic:{title:`Einrichtungsprüfung — {{name}}`,runButton:`Einrichtungsprüfung ausführen`,running:`Einrichtungsprüfung läuft...`,runFailed:`Einrichtungsprüfung konnte nicht ausgeführt werden: {{error}}`,retry:`Erneut prüfen`,overall:{ok:`Alle Prüfungen bestanden — dieser virtuelle Drucker ist korrekt eingerichtet.`,warnings:`Der virtuelle Drucker sollte funktionieren, aber einige Punkte brauchen Aufmerksamkeit.`,problems:`Es wurden Probleme gefunden, die erklären, warum der Slicer diesen virtuellen Drucker nicht sehen oder nutzen kann.`},check:{enabled:{title:`Virtueller Drucker aktiviert`,fail:`Dieser virtuelle Drucker ist ausgeschaltet. Schalten Sie ihn ein, damit er erkennbar wird.`},running:{title:`Dienste laufen`,fail:`Der virtuelle Drucker ist aktiviert, aber seine Dienste laufen nicht. Prüfen Sie das Bambuddy-Protokoll — meist stoppt sie ein Bind-IP-Konflikt oder ein Berechtigungsfehler.`},bind_interface:{title:`Bind-Netzwerkschnittstelle`,fail:`Die Bind-Schnittstelle ist nicht gesetzt oder existiert auf diesem Host nicht mehr. Wählen Sie im Dropdown "Bind-Schnittstelle" eine aktuelle Schnittstelle.`},access_code:{title:`Zugangscode gesetzt`,fail:`Es ist kein Zugangscode gesetzt. Dem Slicer muss derselbe 8-stellige Zugangscode angegeben werden, den Sie hier festlegen.`},target_printer:{title:`Zieldrucker`,fail:`Es ist kein Zieldrucker ausgewählt. Der Proxy-Modus benötigt einen echten Drucker zum Weiterleiten.`,warn:`Der Zieldrucker ist gerade offline — die Weiterleitung wird fortgesetzt, sobald er sich wieder verbindet.`},port_ftps:{title:`Datei-Upload-Dienst (Port {{port}})`,fail:`Auf Port {{port}} der Bind-IP lauscht nichts, daher kann der Slicer keine Dateien hochladen. Ursache ist meist ein Port-Konflikt auf dieser Schnittstelle.`},port_mqtt:{title:`Steuerungsdienst (Port {{port}})`,fail:`Auf Port {{port}} der Bind-IP lauscht nichts, daher kann der Slicer sich nicht verbinden oder den Status anzeigen.`},port_bind:{title:`Erkennungsdienst (Port {{port}})`,fail:`Auf Port {{port}} der Bind-IP lauscht nichts, daher schlägt der Erkennungs-Handshake des Slicers fehl.`},privileged_ports:{title:`Bindung an privilegierte Ports`,fail:`Port {{port}} liegt unter 1024 und dieser Dienst darf ihn nicht belegen — deshalb lauscht oben nichts. Fügen Sie AmbientCapabilities=CAP_NET_BIND_SERVICE in /etc/systemd/system/bambuddy.service ein und starten Sie neu, oder führen Sie "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))" aus. Unter Docker ergänzen Sie cap_add: [NET_BIND_SERVICE].`},certificate:{title:`TLS-Zertifikat`,pass:`Zertifikat bereit. Stellen Sie sicher, dass das Bambuddy-CA-Zertifikat (oben) in den Vertrauensspeicher Ihres Slicers importiert ist.`,fail:`Das TLS-Zertifikat für diesen virtuellen Drucker fehlt. Prüfen Sie, ob das Bambuddy-Datenverzeichnis beschreibbar ist.`}}},bugReport:{logHealthSummary:`Bekannte Probleme in deinen Logs gefunden`,logHealthIntro:`Aktuelle Logs entsprechen bekannten Problemen. Sieh dir die Lösungen unten an — sie zu beheben könnte dein Problem ohne Fehlerbericht lösen. Du kannst unten trotzdem einen Bericht senden.`,title:`Fehler melden`,description:`Beschreibung`,descriptionPlaceholder:`Was ist schiefgelaufen? Bitte beschreiben Sie das Problem...`,email:`E-Mail (optional)`,emailPlaceholder:`ihre@email.de`,emailPrivacy:`Falls angegeben, wird Ihre E-Mail in einem eingeklappten Abschnitt des GitHub-Issues aufgeführt, damit der Betreuer sich melden kann.`,screenshot:`Screenshot`,uploadOrPaste:`Bild hochladen, einfügen oder ziehen`,dataCollectedSummary:`Welche Daten werden im Bericht gesendet?`,dataIncluded:`Enthalten:`,dataIncludedList:`App-Version, Betriebssystem, Architektur, Python-Version, Datenbankstatistiken (nur Anzahl), Druckermodelle, Düsenanzahl, Firmware-Versionen, Verbindungsstatus, Integrationsstatus (Spoolman, MQTT, HA), nicht-sensible Einstellungen, Netzwerkschnittstellenanzahl, Docker-Details, Abhängigkeitsversionen.`,dataNeverIncluded:`Nie enthalten:`,dataNeverIncludedList:`Druckernamen, Seriennummern, Zugangscodes, Passwörter, IP-Adressen, E-Mail-Adressen, API-Schlüssel, Tokens, Webhook-URLs, Hostnamen oder Benutzernamen.`,submit:`Absenden`,startLogging:`Debug-Protokollierung starten`,stepEnableLogging:`Debug-Protokollierung aktiviert`,stepReproduce:`Problem jetzt reproduzieren`,stepStopLogging:`Stoppen & Bericht senden`,stopAndSubmit:`Stoppen & Senden`,maxDuration:`Stoppt automatisch nach {{minutes}} Min.`,stoppingLogs:`Protokolle sammeln & senden...`,submitting:`Fehlerbericht wird gesendet...`,submittingStepConnection:`Drucker-Verbindungsprüfungen werden ausgeführt`,submittingStepVirtualPrinters:`Setup-Prüfungen für virtuelle Drucker werden ausgeführt`,submittingStepLogScan:`Aktuelle Protokolle werden auf bekannte Probleme überprüft`,submittingStepSubmit:`Bericht wird an GitHub gesendet`,submitSuccess:`Fehlerbericht erfolgreich gesendet!`,submitFailed:`Fehlerbericht konnte nicht gesendet werden`,diagnosticChecking:`Druckerverbindungen werden geprüft...`,diagnosticHealthy:`Verbindungsprüfung bestanden — keine Probleme an Ihren Druckern gefunden.`,diagnosticSummary:`{{problems}} von {{total}} Druckern haben Verbindungsprobleme`,diagnosticIntro:`Einer oder mehrere Drucker haben ein Verbindungsproblem, das die Ursache Ihres Problems sein könnte. Klappen Sie einen Drucker unten auf, um die Lösung zu sehen — sie zu beheben könnte das Problem ohne Fehlerbericht lösen. Sie können unten dennoch einen Bericht senden.`,thankYou:`Vielen Dank!`,submitted:`Ihr Fehlerbericht wurde eingereicht.`,viewIssue:`Issue ansehen`,closeKeepsRecording:`Sie können dieses Fenster schließen, während Sie das Problem reproduzieren — die Aufzeichnung läuft weiter, und beim erneuten Öffnen sind Sie wieder hier.`,resumeRecording:`Fehlerbericht zeichnet auf — {{elapsed}}. Zum Abschließen klicken.`,resumeReport:`Bericht fortsetzen`,unexpectedError:`Ein unerwarteter Fehler ist aufgetreten`},failureDetection:{title:`KI-Fehlererkennung`,description:`Überwacht Drucke über eine selbst gehostete Obico-ML-API und reagiert automatisch auf erkannte Fehldrucke.`,mlUrl:`Obico-ML-API-URL`,mlUrlHint:`Basis-URL deines selbst gehosteten Obico-ml_api-Containers (z. B. http://192.168.1.10:3333).`,mlToken:`ML-API-Token (optional)`,mlTokenPlaceholder:`Leer lassen, wenn der Server ohne ML_API_TOKEN läuft`,mlTokenHint:`Muss mit der Umgebungsvariable ML_API_TOKEN deines Obico-ml_api-Containers übereinstimmen. Leer lassen, wenn der Container ohne Token läuft.`,test:`Testen`,testSuccess:`ML-API erreichbar und funktionsfähig.`,testSuccessTokenUnknown:`ML-API erreichbar und funktionsfähig. Das Token konnte nicht geprüft werden.`,testFailed:`ML-API konnte nicht erreicht werden.`,sensitivity:`Empfindlichkeit`,sensitivityLow:`Niedrig (weniger Fehlalarme)`,sensitivityMedium:`Mittel (ausgewogen)`,sensitivityHigh:`Hoch (frühe Erkennung, mehr Fehlalarme)`,sensitivityHint:`Passt die Konfidenz-Schwellwerte an, die Warnungen und Fehler auslösen.`,action:`Aktion bei erkanntem Fehler`,actionNotify:`Nur benachrichtigen`,actionPause:`Druck pausieren`,actionPauseOff:`Pausieren und Strom abschalten`,pollInterval:`Prüfintervall (Sekunden)`,pollIntervalHint:`Wie oft jeder Drucker während eines laufenden Drucks geprüft wird. Minimum 5 s, Maximum 120 s.`,externalUrlMissing:`Externe URL ist nicht gesetzt.`,externalUrlHint:`Die ML-API ruft das Kamera-Snapshot per URL ab. Setze die externe URL in den allgemeinen Einstellungen, damit der ML-API-Container Bambuddy erreichen kann.`,perPrinterTitle:`Überwachte Drucker`,perPrinterHint:`Wähle, welche Drucker vom Erkennungsdienst überwacht werden.`,monitorAll:`Alle verbundenen Drucker überwachen`,statusTitle:`Status`,serviceRunning:`Dienst läuft`,thresholds:`Niedrig / Hoch-Schwellwerte`,activePrinters:`Aktive Drucke`,noActivePrints:`Derzeit laufen keine Drucke.`,historyTitle:`Letzte Erkennungen`,noHistory:`Noch keine Erkennungen.`},makerworld:{title:`MakerWorld`,description:`Füge eine MakerWorld-Modell-URL ein, um es direkt aus Bambuddy zu importieren und zu drucken — ohne die Bambu Handy App zu öffnen.`,pasteUrlHeader:`Von MakerWorld importieren`,pasteUrlPlaceholder:`https://makerworld.com/de/models/… oder beliebigen MakerWorld-Link einfügen`,resolveButton:`Laden`,signInRequiredTitle:`Bambu-Cloud-Anmeldung für Download erforderlich`,signInRequiredBody:`Modell-Details können anonym angezeigt werden, aber MakerWorld verlangt eine Bambu-Cloud-Anmeldung zum Herunterladen der 3MF-Dateien.`,signInExpiredTitle:`Bambu-Cloud-Anmeldung abgelaufen`,signInExpiredBody:`Sie sind weiterhin bei Bambuddy angemeldet, aber Bambu Lab akzeptiert das gespeicherte Token nicht mehr, daher schlagen Downloads fehl. Melden Sie sich erneut bei Bambu Cloud an.`,openCloudSettings:`Cloud-Einstellungen öffnen`,untitledModel:`Unbenanntes Modell`,byCreator:`von {{name}}`,downloadsCount:`{{count}} Downloads`,licensePrefix:`Lizenz`,alreadyImported:`Bereits in Bibliothek`,openOnMakerworld:`Auf MakerWorld öffnen`,alreadyInLibrary:`Dieses Modell ist bereits in deiner Bibliothek — zu finden im Dateimanager → MakerWorld`,importSuccess:`{{filename}} importiert — gespeichert im Dateimanager → MakerWorld`,platesHeader:`Platten ({{count}})`,plateDefaultName:`Platte {{n}}`,materialCount:`{{count}} Filamente`,amsRequired:`AMS erforderlich`,slicedFor:`Gesliced für {{printer}}`,alsoCompatible:`Auch kompatibel: {{printers}}`,importToLibrary:`Speichern`,sliceIn:`Speichern & in {{slicer}} öffnen`,disclaimer:`Die MakerWorld-Integration verwendet von der Community dokumentierte API-Endpunkte. Bambuddy ist nicht mit MakerWorld oder Bambu Lab verbunden oder von diesen unterstützt.`,lastImportSuccess:`In deine Bibliothek importiert`,lastImportAlreadyInLibrary:`Bereits in deiner Bibliothek`,viewInLibrary:`Im Dateimanager anzeigen`,openInBambuStudio:`In Bambu Studio öffnen`,openInOrcaSlicer:`In OrcaSlicer öffnen`,importTo:`In Dateimanager importieren`,recentImportsHeader:`Zuletzt importiert`,phaseResolving:`Auflösen`,phaseDownloading:`Lade herunter`,folderAuto:`MakerWorld (Standard)`,importAll:`Alle importieren`,importAllProgress:`Importiere {{current}}/{{total}}`,openGallery:`Bildergalerie öffnen`,galleryPrev:`Vorheriges Bild`,galleryNext:`Nächstes Bild`,deleteImport:`Aus Bibliothek entfernen`,importDeleting:`Wird entfernt…`,importDeleted:`Aus Bibliothek entfernt`,confirmDelete:`{{filename}} aus der Bibliothek entfernen? Die lokale Datei wird gelöscht, die Platte kann aber erneut von MakerWorld importiert werden.`,errors:{resolveFailed:`Diese MakerWorld-URL konnte nicht aufgelöst werden.`,downloadFailed:`Download fehlgeschlagen. Bitte erneut versuchen.`,deleteFailed:`Datei konnte nicht aus der Bibliothek entfernt werden.`}},gcodeViewer:{filamentSlot:`Filament {{n}}`,loading:`Werkzeugweg wird gelesen…`,loadFailed:`Der G-Code für diese Datei konnte nicht geladen werden.`,showTravel:`Leerfahrten`,topLayer:`Oberste Schicht`,bottomLayer:`Unterste Schicht`,noSource:`Es wurde keine Datei zur Vorschau angegeben.`,view:{filament:`Filament`,feature:`Merkmal`,height:`Höhe`,width:`Breite`},feature:{wall:`Wände`,sparseInfill:`Spärliche Füllung`,solidInfill:`Massive Füllung`,bridge:`Brücke / Überhang`,support:`Stützen`,skirt:`Skirt / Brim`,gapFill:`Lückenfüllung`,ironing:`Bügeln`,primeTower:`Reinigungsturm`},back:`Zurück`,backToArchives:`Zurück zum Druckarchiv`,backToFiles:`Zurück zum Dateimanager`,plates:`Platten`,plateN:`Platte {{n}}`},libraryTrash:{title:`Papierkorb`,headerButton:`Papierkorb`,headerTooltip:`In den Papierkorb verschobene Dateien anzeigen`,backToFiles:`Zurück zum Dateimanager`,subtitleAdmin:`Gelöschte Dateien bleiben {{days}} Tage hier und werden dann automatisch entfernt. Diese Ansicht zeigt Papierkorb-Dateien aller Benutzer.`,subtitleUser:`Gelöschte Dateien bleiben {{days}} Tage hier und werden dann automatisch entfernt.`,loading:`Papierkorb wird geladen…`,loadError:`Papierkorb konnte nicht geladen werden.`,empty:`Der Papierkorb ist leer.`,summary:`{{count}} Dateien · {{size}}`,emptyTrash:`Papierkorb leeren`,restore:`Wiederherstellen`,purgeNow:`Jetzt löschen`,autoPurgeIn:`Wird in {{when}} gelöscht`,days:`Tage`,retentionLabel:`Automatisch löschen nach`,selectAll:`Alle auswählen`,selectOne:`{{filename}} auswählen`,selectionCount:`{{count}} ausgewählt`,bulkRestore:`Auswahl wiederherstellen`,bulkPurge:`Auswahl löschen`,col:{filename:`Datei`,folder:`Ordner`,size:`Größe`,deleted:`Verschoben`,autoPurge:`Löschung`,owner:`Besitzer`,actions:`Aktionen`},confirm:{purgeTitle:`Endgültig löschen?`,purgeBody:`{{filename}} wird von der Festplatte gelöscht und kann nicht wiederhergestellt werden.`,emptyTitle:`Papierkorb leeren?`,emptyBody:`Alle {{count}} Dateien werden endgültig von der Festplatte gelöscht.`,bulkPurgeTitle:`Ausgewählte Dateien endgültig löschen?`,bulkPurgeBody:`Die {{count}} ausgewählten Dateien werden von der Festplatte gelöscht und können nicht wiederhergestellt werden.`,cta:`Endgültig löschen`},toast:{restored:`Datei wiederhergestellt.`,restoreFailed:`Datei konnte nicht wiederhergestellt werden.`,purged:`Datei endgültig gelöscht.`,purgeFailed:`Datei konnte nicht gelöscht werden.`,emptied:`{{count}} Datei(en) aus dem Papierkorb gelöscht.`,emptyFailed:`Papierkorb konnte nicht geleert werden.`,retentionSaved:`Automatisches Löschen auf {{days}} Tage gesetzt.`,retentionFailed:`Einstellung konnte nicht gespeichert werden.`,bulkRestored:`{{count}} Datei(en) wiederhergestellt.`,bulkPurged:`{{count}} Datei(en) gelöscht.`}},libraryPurge:{title:`Alte Dateien entfernen`,headerButton:`Alte entfernen`,headerTooltip:`Alte Dateien im Block in den Papierkorb verschieben`,description:`Räume alte Dateien in einem Rutsch aus deiner Bibliothek. Dateien mit Druckverlauf werden nach dem letzten Druckdatum bewertet; nie gedruckte Dateien nach dem Upload-Datum.`,ageLabel:`Dateien älter als`,days:`Tage`,includeNeverPrinted:`Dateien einbeziehen, die nie gedruckt wurden`,effectsTitle:`Was passiert, wenn du auf „Entfernen" klickst`,effect1:`Passende Dateien werden in den Papierkorb verschoben — noch nicht von der Festplatte gelöscht.`,effect2:`Du kannst sie bis zum Ablauf der Aufbewahrungsfrist jederzeit wiederherstellen.`,effect3:`Nach Ablauf der Frist löscht der Papierkorb-Sweeper sie endgültig von der Festplatte.`,effect4:`Dateien in externen (verknüpften) Ordnern werden übersprungen — Bambuddy löscht keine Bytes, die ihm nicht gehören.`,previewLoading:`Prüfe, wie viele Dateien passen…`,previewFailed:`Vorschau konnte nicht geladen werden.`,previewSummary:`{{count}} Dateien · {{size}} würden in den Papierkorb verschoben`,andMore:`…und {{count}} weitere`,warning:`Dateien im Papierkorb zählen weiterhin zum Speicher, bis die Aufbewahrungsfrist abgelaufen ist. Leere den Papierkorb danach, um sofort Speicher freizugeben.`,confirmCta:`{{count}} in den Papierkorb verschieben`,purging:`Wird verschoben…`,toast:{success:`{{count}} Datei(en) in den Papierkorb verschoben.`,failed:`Dateien konnten nicht verschoben werden.`}},libraryAutoPurge:{enableLabel:`Alte Dateien automatisch entfernen`,enableDescription:`Führt die Admin-Bereinigung einmal pro Tag aus. Dateien landen zuerst im Papierkorb — sie werden nicht sofort gelöscht.`,ageLabel:`Dateien älter als`,ageDescription:`Minimum 7 Tage, Maximum 10 Jahre. Verwendet dieselbe Altersregel wie die manuelle „Alte entfernen“-Schaltfläche.`,days:`Tage`,includeNeverPrinted:`Dateien einbeziehen, die nie gedruckt wurden`,saveFailed:`Einstellungen konnten nicht gespeichert werden.`},archivePurge:{headerButton:`Alte löschen`,headerTooltip:`Alte Archive in einem Rutsch löschen`,title:`Alte Archive löschen`,description:`Räume alte Druckhistorie auf. Jedes Archiv wird nach seinem letzten abgeschlossenen Druck bewertet — ein erneuter Druck setzt die Frist zurück, aktive Arbeit bleibt sicher.`,ageLabel:`Archive löschen, die zuletzt gedruckt wurden vor`,days:`Tage`,effectsTitle:`Was passiert, wenn du auf „Löschen" klickst`,effect1:`Jedes passende Archiv wird aus der Listenansicht ausgeblendet und seine Dateien werden von der Festplatte entfernt (3MF, Vorschau, Timelapse, Quell-3MF, F3D, Fotos).`,effect2:`Die Archivzeile bleibt in der Datenbank, damit die Quick Stats den Filament-, Zeit-, Kosten- und Energiebeitrag behalten — wie der Standard beim Einzel-Löschen.`,effect3:`Aktiviere unten „Auch aus Statistiken entfernen", um zusätzlich den Quick-Stats-Beitrag zu verwerfen (entspricht dem Einzel-Löschen-Häkchen). Dieser Pfad ist unwiderruflich.`,effect4:`Ein erneuter Druck setzt die Frist zurück, Archive, die du weiterhin nutzt, bleiben sicher.`,purgeStatsLabel:`Auch aus Statistiken entfernen`,purgeStatsHint:`Verwirft die passenden Archive aus den Quick Stats (Filament, Zeit, Kosten, Energie). Ohne diese Option behalten die Quick Stats jeden Beitrag und nur die Dateien werden gelöscht.`,previewLoading:`Prüfe passende Archive…`,previewFailed:`Vorschau konnte nicht erstellt werden.`,previewSummary:`{{count}} Archive · {{size}} würden entfernt`,andMore:`…und {{count}} weitere`,warning:`Dateien werden von der Festplatte entfernt und können nicht wiederhergestellt werden. Lade wichtige Archive vorher herunter oder markiere sie als Favorit.`,confirmCta:`{{count}} Archiv(e) entfernen`,purging:`Entferne…`,toast:{success:`{{count}} Archiv(e) entfernt.`,failed:`Archive konnten nicht gelöscht werden.`}},archiveAutoPurge:{enableLabel:`Alte Archive automatisch löschen`,enableDescription:`Blendet einmal pro Tag Archive aus der Listenansicht aus und entfernt ihre Dateien von der Festplatte, wenn sie im angegebenen Zeitraum nicht gedruckt wurden. Ein erneuter Druck setzt die Frist zurück.`,ageLabel:`Archive automatisch löschen, die zuletzt gedruckt wurden vor`,ageDescription:`Minimum 7 Tage, Maximum 10 Jahre. Basiert auf dem letzten abgeschlossenen Druck — ein erneuter Druck setzt die Frist zurück. Entfernt 3MF, Vorschau, Timelapse, Quell-3MF, F3D und Fotos.`,days:`Tage`,purgeStatsLabel:`Auch aus Statistiken entfernen`,purgeStatsDescription:`Wenn aktiviert, verwirft der tägliche Sweeper auch den Quick-Stats-Beitrag (Filament, Zeit, Kosten, Energie) jedes gelöschten Archivs. Standard aus — Quick Stats behalten den Beitrag, nur die Dateien werden gelöscht.`,runNow:`Archive jetzt löschen`,saveFailed:`Einstellungen konnten nicht gespeichert werden.`},cameraTokens:{scope:{camera_stream:`Kamera-Stream`,camwall:`Kamera-Wand`,overlay:`Streaming-Overlay`},title:`Kamera-API-Tokens`,navTitle:`Kamera-API-Tokens`,description:`Langlebige Tokens, um den Kamera-Stream in Home Assistant, Frigate, Kiosk-Bildschirme oder jedes andere Werkzeug einzubinden, das eine stabile Adresse braucht. Der Geltungsbereich wird beim Erstellen gewählt; ein Token lässt sich jederzeit widerrufen.`,loading:`Laden…`,confirmRevoke:{title:`Dieses Token widerrufen?`,body:`Jedes Gerät, das "{{name}}" verwendet, verliert sofort den Zugriff. Dies kann nicht rückgängig gemacht werden.`,cancel:`Abbrechen`,confirm:`Widerrufen`},create:{scopeLabel:`Geltungsbereich`,hintCameraStream:`Ein Kamera-Stream-Token kann ausschließlich Kamera-Streams und Schnappschüsse abrufen. Geeignet für Home Assistant, Frigate oder alles, was eine einzelne Kamera einbettet.`,hintCamWall:`Ein Kamera-Wand-Token öffnet /camwall auf einem Bildschirm ohne Anmeldung. Es sieht Name und Status jedes Druckers sowie deren Kamera-Streams. Dateinamen, Adressen und Zugangscodes sieht es nicht.`,hintOverlay:`Ein Streaming-Overlay-Token öffnet /overlay/{printerId} auf einem Bildschirm ohne Anmeldung – für OBS oder jeden Livestream. Es sieht den Kamera-Stream eines Druckers sowie dessen Live-Druckstatus, einschließlich des auf dem Bildschirm angezeigten Dateinamens. Adressen und Zugangscodes sieht es nicht.`,title:`Neues Token erstellen`,nameLabel:`Token-Name`,namePlaceholder:`z. B. Home Assistant`,daysLabel:`Tage bis Ablauf`,submit:`Erstellen`,hint:`Maximale Lebensdauer 365 Tage. Der Token-Wert wird nur einmal bei der Erstellung angezeigt – jetzt kopieren.`},created:{camWallUrlTitle:`Kamera-Wand-Adresse für diesen Bildschirm`,camWallUrlHint:`Diese Adresse auf dem Bildschirm öffnen. Wer die Adresse lesen kann, kann die Kamera-Wand sehen — behandeln Sie sie wie einen Schlüssel. Widerrufen Sie das Token, um den Bildschirm abzuschalten.`,overlayUrlTitle:`Overlay-Adresse für OBS`,overlayUrlHint:`Fügen Sie dies in OBS als Browser-Quelle hinzu. Ändern Sie die Zahl in /overlay/1 auf die Nummer Ihres Druckers (aus dessen Adresse auf der Seite „Drucker“). Wer die Adresse lesen kann, kann den Stream sehen – behandeln Sie sie wie einen Schlüssel und widerrufen Sie das Token, um sie abzuschalten.`,title:`Token erstellt – jetzt kopieren`,warning:`Dies ist das einzige Mal, dass dieser Token sichtbar ist. Nach dem Schließen dieses Dialogs können Sie ihn nie wieder anzeigen.`,copy:`Kopieren`,dismiss:`Ich habe es gespeichert`},list:{scope:`Geltungsbereich`,myTitle:`Meine Tokens`,allTitle:`Alle Benutzer (Admin-Ansicht)`,empty:`Noch keine Tokens.`,name:`Name`,owner:`Eigentümer`,prefix:`Präfix`,created:`Erstellt`,expires:`Läuft ab`,lastUsed:`Zuletzt verwendet`,revoke:`Widerrufen`,expired:`Abgelaufen`},toast:{created:`Token erstellt`,createFailed:`Token konnte nicht erstellt werden`,revoked:`Token widerrufen`,revokeFailed:`Token konnte nicht widerrufen werden`,loadFailed:`Tokens konnten nicht geladen werden`,copied:`In Zwischenablage kopiert`,copyFailed:`Kopieren fehlgeschlagen – manuell auswählen und kopieren`}},forecast:{title:`Bestandsprognose`,noSpools:`Keine aktiven Spulen gefunden. Fügen Sie Spulen zu Ihrem Inventar hinzu, um Prognosedaten zu sehen.`,noUsageData:`Keine Verbrauchsdaten verfügbar — die Bestandszeitlinie kann nicht projiziert werden.`,sku:`SKU`,material:`Material`,stock:`Bestand`,dailyRate:`Rate`,daysLeft:`Verbleibende Tage`,emptyBy:`Aufgebraucht am`,reorderBy:`Nachbestellen bis`,actions:`Aktionen`,trend:`Trend`,estimated:`Gesch.`,noData:`Keine Daten`,timeframe:`Zeitraum`,chartTitle:`Bestandsprognose — Top 5 Materialien`,dashedLinesROP:`Gestrichelte Linien = Nachbestellpunkte`,stockLevel:`Bestandsniveau`,reorderPoint:`Nachbestellpunkt`,safetyMargin:`Sicherheitspuffer`,trendLegend:`Trend (verlaufsbasiert, 95 % Serviceniveau)`,estimatedLegend:`Geschätzt (Gewichtsdelta)`,noDataLegend:`Keine Daten`,ropLabel:`NBP`,ssLabel:`SB`,safetyStockLegend:`Sicherheitsbestand`,stockArrivalLegend:`Wareneingang`,stockoutLegend:`Fehlbestand`,alertCount_one:`{{count}} Warnung`,alertCount_other:`{{count}} Warnungen`,order:`Bestellen`,globalLeadTime:`Globale Lieferzeit`,globalLeadTimeHint:`Globale Lieferzeitvorgabe — wird in der Nachbestellpunktberechnung für alle SKUs verwendet`,save:`Speichern`,cancel:`Abbrechen`,settingsSaved:`Einstellungen gespeichert`,failedSaveSettings:`Einstellungen konnten nicht gespeichert werden`,globalLeadTimeSaved:`Globale Lieferzeit gespeichert`,skuLeadTimeOverride:`SKU-Lieferzeitüberschreibung`,skuLeadTimeHint:`0 = globale Lieferzeit verwenden. Größer 0 setzen, um für diesen SKU zu überschreiben.`,safetyMarginLabel:`Sicherheitspuffer`,effectiveLeadTime:`Effektive Lieferzeit`,effectiveLeadTimeHint:`max(global {{global}}T, SKU {{sku}}T)`,reorderPointHint:`d̄ × LT + safety margin — bei diesem Bestand bestellen`,safetyMarginHint:`Statistischer Sicherheitsbestand (z=1,65 × σ × √LT) + benutzerdefinierter Puffer`,safetyMarginHintDays:`Zusätzlicher Puffer auf den statistischen Sicherheitsbestand.{{approx}}`,safetyMarginHintDaysApprox:` ≈ {{g}}g beim aktuellen Verbrauch.`,safetyMarginHintG:`Fester Gewichtspuffer auf den statistischen Sicherheitsbestand.{{approx}}`,safetyMarginHintGApprox:` ≈ {{days}}d beim aktuellen Verbrauch.`,individualSpools:`Einzelne Spulen`,labelWeight:`Etikett`,spoolCount_one:`{{count}} Spule`,spoolCount_other:`{{count}} Spulen`,stockBreakRisk:`Bestandsunterbrechungsrisiko`,stockBreakBefore:`Bestandsunterbrechung vor Auffüllung`,stockBreakDetail:`{{days}}d verbleibend, Lieferzeit {{lt}}d.`,reorderNow:`Jetzt nachbestellen`,reorderTriggerPassed:`Auslösedatum {{date}} ist überschritten.`,shoppingList:`Einkaufsliste`,shoppingListItems_one:`({{count}} Artikel)`,shoppingListItems_other:`({{count}} Artikel)`,shoppingListEmpty:`Einkaufsliste ist leer. Klicken Sie auf das Warenkorbsymbol in einer Zeile, um Artikel hinzuzufügen.`,addToCart:`Zur Einkaufsliste hinzufügen`,alertsSnoozed:`Benachrichtigungen für diese SKU stummschalten`,alertsEnabled:`Benachrichtigungen für diese SKU aktivieren`,addedToCart:`Zur Einkaufsliste hinzugefügt`,failedAddItem:`Artikel konnte nicht hinzugefügt werden`,listView:`Liste`,logisticsView:`Logistik`,qty:`Menge`,weight:`Gewicht`,leadTime:`Lieferzeit`,expectedRestock:`Erwartete Auffüllung`,status:`Status`,note:`Notiz`,pending:`Ausstehend`,purchased:`Bestellt`,received:`Erhalten`,markPurchased:`Als bestellt markieren`,markReceived:`Als erhalten markieren — fügt Spulen dem Lagerbestand hinzu`,resetToPending:`Auf ausstehend zurücksetzen`,remove:`Entfernen`,clearAll:`Alle löschen`,downloadCsv:`CSV`,addToCartTitle:`Zur Einkaufsliste hinzufügen`,byQuantity:`Nach Menge`,byDuration:`Nach Dauer`,numberOfSpools:`Anzahl der Spulen`,lastHowManyDays:`Wie viele Tage soll es reichen?`,noUsageQty:`Keine Verbrauchsdaten — Menge auf 1 gesetzt.`,noteOptional:`Notiz (optional)`,notePlaceholder:`z. B. für Projekt X, dringend…`,addNSpools_one:`{{count}} Spule hinzufügen`,addNSpools_other:`{{count}} Spulen hinzufügen`,onArrival:`Bei Ankunft`,stockBreakIn:`Bestandsunterbrechung in {{days}}d.`,stockRunsOutBefore:`Bestand läuft vor Ablauf der {{lt}}d Lieferzeit aus.`,atRate:`Bei {{rate}}g/Tag benötigen Sie`,moreSpools_one:`{{count}} weitere Spule`,moreSpools_other:`{{count}} weitere Spulen`,bridgeGap:`um die Lücke zu überbrücken.`,noReadAccess:`Sie haben keine Berechtigung, Bestandsprognosen anzuzeigen.`,noWriteAccess:`Sie haben keine Berechtigung, Prognoseeinstellungen zu ändern.`}}},es:{translation:{nav:{printers:`Impresoras`,archives:`Archivos`,queue:`Cola de impresión`,stats:`Estadísticas`,profiles:`Perfiles`,maintenance:`Mantenimiento`,projects:`Proyectos`,inventory:`Filamento`,finance:`Finanzas`,files:`Gestor de archivos`,makerworld:`MakerWorld`,notifications:`Notificaciones`,settings:`Ajustes`,system:`Sistema`,collapseSidebar:`Contraer barra lateral`,expandSidebar:`Expandir barra lateral`,update:`Actualizar`,updateAvailable:`Actualización disponible: v{{version}}`,updateAvailableBanner:`¡La versión {{version}} está disponible!`,viewUpdate:`Ver actualización`,viewOnGithub:`Ver en GitHub`,keyboardShortcuts:`Atajos de teclado (?)`,switchToLight:`Cambiar a modo claro`,switchToDark:`Cambiar a modo oscuro`,switchToSystem:`Cambiar a modo del sistema`,smartSwitches:`Interruptores inteligentes`,logout:`Cerrar sesión`,installApp:`Instalar app`,installAppSuccess:`Bambuddy se ha instalado`},common:{plusNMore:`+{{count}} más`,save:`Guardar`,saving:`Guardando...`,cancel:`Cancelar`,delete:`Eliminar`,edit:`Editar`,add:`Añadir`,close:`Cerrar`,confirm:`Confirmar`,loading:`Cargando...`,error:`Error`,errorLoading:`Error al cargar los datos`,retry:`Reintentar`,success:`Éxito`,warning:`Advertencia`,enabled:`Activado`,disabled:`Desactivado`,yes:`Sí`,no:`No`,on:`Encendido`,off:`Apagado`,all:`Todos`,none:`Ninguno`,search:`Buscar`,filter:`Filtrar`,sort:`Ordenar`,refresh:`Actualizar`,download:`Descargar`,upload:`Subir`,uploading:`Subiendo...`,uploadFailed:`Error al subir`,actions:`Acciones`,status:`Estado`,name:`Nombre`,description:`Descripción`,date:`Fecha`,time:`Hora`,hours:`horas`,minutes:`minutos`,seconds:`segundos`,days:`días`,enable:`Activar`,disable:`Desactivar`,permissions:`Permisos`,noPrinters:`No hay impresoras configuradas`,noData:`No hay datos disponibles`,linkNotFound:`Enlace no encontrado`,required:`Obligatorio`,optional:`Opcional`,dismiss:`Descartar`,apply:`Aplicar`,reset:`Restablecer`,export:`Exportar`,import:`Importar`,clear:`Borrar`,selectAll:`Seleccionar todo`,deselectAll:`Deseleccionar todo`,noChange:`— Sin cambios —`,unchanged:`Sin cambios`,unassigned:`Sin asignar`,unknown:`Desconocido`,unknownError:`Error desconocido`,today:`Hoy`,tomorrow:`Mañana`,asap:`Lo antes posible`,overdue:`Atrasado`,now:`Ahora`,collapse:`Contraer`,expand:`Expandir`,previous:`Anterior`,next:`Siguiente`,viewArchive:`Ver archivo`,viewInFileManager:`Ver en el gestor de archivos`,addedBy:`Añadido por {{username}}`,prints:`impresiones`,more:`+{{count}} más`,ascending:`Ascendente`,descending:`Descendente`,back:`Atrás`,copy:`Copiar`,copied:`¡Copiado!`,printer:`Impresora`,remove:`Quitar`,type:`Tipo`,print:`Imprimir`,rename:`Renombrar`,move:`Mover`,create:`Crear`,duplicate:`Duplicar`,left:`Izquierda`,right:`Derecha`,user:`Usuario`,run:`Ejecutar`,running:`Ejecutando...`},finance:{allTypes:`Todos los tipos`,allCostCenters:`Todos los centros de costes`,title:`Finanzas`,subtitle:`Monedero, transacciones personales y centros de costes`,noAccess:`No tienes permiso para ver los datos financieros.`,personalView:`Vista personal`,adminView:`Vista de administración`,createCostCenter:`Crear centro de costes`,adjustWallet:`Ajustar monedero`,addManualPrint:`Añadir impresión manual`,manageMembers:`Gestionar miembros del centro de costes`,currentBalance:`Saldo personal`,transactions:`Transacciones`,personalTransactions:`Transacciones personales`,costCenters:`Centros de costes`,availableForPrinting:`Disponible para asignar impresiones`,costCenterName:`Nombre`,budgetType:`Tipo de presupuesto`,monthlyBudget:`Presupuesto mensual`,totalBudget:`Presupuesto total`,noBudget:`Sin presupuesto`,create:`Crear`,selectUser:`Seleccionar usuario`,transactionType:`Tipo`,amount:`Importe`,noCostCenter:`Sin centro de costes`,descriptionOptional:`Descripción (opcional)`,applyAdjustment:`Aplicar ajuste`,memberCanPrint:`El miembro puede imprimir`,addMember:`Añadir miembro`,canPrint:`Puede imprimir`,noMembers:`No hay miembros asignados.`,editCostCenter:`Editar centro de costes`,myCostCenters:`Mis centros de costes`,costCentersHint:`Revisa los límites presupuestarios y mantén los costes bajo control`,noCostCenters:`No se encontraron centros de costes.`,owner:`Propietario`,balance:`Saldo de cuenta`,unlimited:`Ilimitado`,budgetPolicyHint:`Los saldos de cuenta registran los costes. La impresión solo está limitada por el presupuesto del centro de costes seleccionado; sin presupuesto, es ilimitada.`,budget:`Presupuesto`,shared:`Compartido`,cannotEditPrivateCostCenter:`Los centros de costes privados no se pueden editar aquí`,recentTransactions:`Transacciones recientes`,transactionsHint:`Filtrar por tipo y centro de costes`,first:`Primera`,prev:`Anterior`,next:`Siguiente`,last:`Última`,pageNumberOf:`Página {{page}} de {{total}}`,noTransactions:`No hay transacciones disponibles.`,noTransactionsForFilter:`Ninguna transacción coincide con los filtros seleccionados.`,costCenter:`Centro de costes`,balanceAfter:`Saldo posterior`,userWithId:`Usuario n.º {{id}}`,partial:`Parcial`,editTransaction:`Editar transacción`,selectCostCenter:`Seleccionar centro de costes...`,costCenterRequired:`Selecciona un centro de costes`,amountExample:`p. ej., 4,00`,manualAdjustmentExample:`p. ej., Ajuste manual`,userRequired:`Selecciona un usuario`,amountInvalid:`El importe debe ser un número válido`,createdCostCenter:`Centro de costes creado`,createCostCenterFailed:`No se pudo crear el centro de costes`,transactionDeleted:`Transacción eliminada`,deleteTransactionFailed:`No se pudo eliminar la transacción`,transactionEdited:`Transacción actualizada y libro mayor recalculado`,editTransactionFailed:`No se pudo editar la transacción`,manualPrintCreated:`Cargo de impresión manual añadido y libro mayor recalculado`,manualPrintFailed:`No se pudo crear la impresión manual`,memberSaved:`Miembro guardado`,memberSaveFailed:`No se pudo guardar el miembro`,memberRemoved:`Miembro eliminado`,memberRemoveFailed:`No se pudo eliminar el miembro`,costCenterNameRequired:`El nombre del centro de costes es obligatorio`,costCenterUpdated:`Centro de costes actualizado`,costCenterUpdateFailed:`No se pudo actualizar el centro de costes`,confirmDeleteCostCenter:`¿Eliminar el centro de costes «{{name}}»?`,costCenterDeleted:`Centro de costes eliminado`,costCenterDeleteFailed:`No se pudo eliminar el centro de costes`,deleteTransactionConfirm:`¿Eliminar esta transacción? Los saldos se recalcularán automáticamente.`,deposit:`Ingreso`,withdraw:`Retirada`,printCharge:`Cargo de impresión`,deleteTransaction:`Eliminar transacción`},printers:{addPreflight:{checking:`Comprobando la conexión...`,warning:`Algunas comprobaciones de conexión fallaron. Esta impresora podría aparecer como desconectada. Revisa las comprobaciones de abajo, soluciona lo que puedas o guárdala de todos modos.`,back:`Atrás`,saveAnyway:`Guardar de todos modos`},title:`Impresoras`,addPrinter:`Añadir impresora`,editPrinter:`Editar impresora`,deletePrinter:`Eliminar impresora`,printerName:`Nombre de la impresora`,serialNumber:`Número de serie`,ipAddress:`Dirección IP / Nombre de host`,accessCode:`Código de acceso`,model:`Modelo`,nozzleCount:`Número de boquillas`,autoArchive:`Archivado automático`,status:{available:`Disponible`,idle:`Inactiva`,printing:`Imprimiendo`,paused:`En pausa`,offline:`Desconectada`,problem:`Problema`,error:`Error`,finished:`Finalizada`,unknown:`Desconocido`},temperatures:{nozzle:`Boquilla`,bed:`Cama`,chamber:`Cámara`},heaterHistory:{title:`Historial de calentadores`,openLabel:`Ver historial de calentadores`,nozzle:`Boquilla`,nozzle2:`Boquilla 2`,bed:`Cama`,chamber:`Cámara`,error:`No se pudo cargar el historial`,empty:`Aún no hay datos registrados`},progress:`{{percent}}% completado`,timeRemaining:`{{time}} restante`,deleteConfirm:`¿Está seguro de que desea eliminar "{{name}}"?`,maintenanceOk:`Mantenimiento correcto`,maintenanceWarning:`{{count}} advertencia`,maintenanceWarning_plural:`{{count}} advertencias`,maintenanceDue:`{{count}} pendiente`,maintenanceDue_plural:`{{count}} pendientes`,sort:{name:`Nombre`,status:`Estado`,model:`Modelo`,location:`Ubicación`,eta:`Tiempo restante`,ascending:`Orden ascendente`,descending:`Orden descendente`},cardSize:{small:`Tarjetas pequeñas`,medium:`Tarjetas medianas`,large:`Tarjetas grandes`,extraLarge:`Tarjetas extragrandes`},pageView:{openCamWallPage:`Abrir el muro de cámaras como página`,cards:`Tarjetas`,camWall:`Muro de cámaras`},camWall:{page:{tokenRejected:`Este enlace del muro de cámaras ya no es válido. Es posible que el token haya caducado o se haya revocado.`,loadFailed:`No se han podido cargar las impresoras.`},noPrinters:`No hay impresoras que mostrar`,noSignal:`Sin señal`,live:`En vivo`,snap:`Foto`,off:`Inactivo`,summary:`{{live}} en vivo, {{snap}} fotos, {{total}} en total`,layer:`Capa {{cur}}/{{total}}`,timeLeft:`quedan {{time}}`,statusMode:{off:`Apagado`,compact:`Compacto`,full:`Completo`},settings:{title:`Ajustes del muro de cámaras`,maxLive:`Máx. transmisiones en vivo`,maxLiveHint:`Cuántos mosaicos transmiten en vivo a la vez. Los demás se actualizan como fotos.`,snapshotInterval:`Intervalo de fotos (segundos)`,snapshotIntervalHint:`Con qué frecuencia los mosaicos no en vivo obtienen una nueva foto.`,statusOverlay:`Superposición de estado`,statusOverlayHint:`Compacto: solo insignia de estado. Completo: + progreso, capa, tiempo restante.`}},hideOffline:`Ocultar desconectadas`,nextAvailable:`Próxima disponible`,powerOn:`Encender`,offlinePrintersWithPlugs:`Impresoras desconectadas con enchufes inteligentes`,noPrintersConfigured:`Aún no hay impresoras configuradas`,search:`Buscar impresoras...`,noSearchResults:`Ninguna impresora coincide con su búsqueda o filtros`,filter:{allStatuses:`Todos los estados`,allLocations:`Todas las ubicaciones`},toolbar:{filters:`Filtros`,view:`Vista`,actions:`Acciones`},readyToPrint:`Lista para imprimir`,external:`Externo`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Eliminar archivos de impresión`,noLabel:`Sin etiqueta`,printPreview:`Vista previa de impresión`,width:`Anchura`,height:`Altura`,noObjectsFound:`No se encontraron objetos`,objectsLoadedOnPrintStart:`Los objetos se cargan al iniciar una impresión`,willBeSkipped:`Se omitirá`,name:`Nombre`,serialCannotBeChanged:`El número de serie no se puede cambiar`,locationHelp:`Se usa para agrupar impresoras y filtrar trabajos en cola`,wifiSignal:{veryWeak:`Muy débil`,weak:`Débil`,fair:`Aceptable`,good:`Buena`,excellent:`Excelente`},maintenanceUpToDate:`Todo el mantenimiento al día - Haga clic para ver`,maintenance:{title:`En mantenimiento`,subtitle:`Esta impresora está en pausa — sin conexión, no elegible para la cola y sin enviar notificaciones.`,pillLabel:`Mantenimiento`,exitButton:`Salir de mantenimiento`,menuEnter:`Entrar en modo mantenimiento`,menuExit:`Salir del modo mantenimiento`,toastEntered:`{{name}} ahora está en modo mantenimiento`,toastExited:`{{name}} vuelve a estar en línea`,confirmMidPrintTitle:`¿Entrar en modo mantenimiento durante una impresión?`,confirmMidPrintMessage:`{{name}} está imprimiendo actualmente. Entrar en modo mantenimiento desconectará MQTT y detendrá el seguimiento del progreso y las notificaciones de finalización para este trabajo. ¿Continuar?`,editFieldLabel:`Modo mantenimiento`,editFieldHelp:`Cuando está activado, esta impresora se pausa de MQTT, despacho de cola y notificaciones — útil para reparaciones, instalaciones paralelas de Bambuddy o suspensión temporal.`},chamberLightOn:`Encender luz de la cámara`,chamberLightOff:`Apagar luz de la cámara`,files:`Archivos`,browseFiles:`Explorar archivos de la impresora`,autoOffAfterPrint:`Apagado automático tras la impresión`,autoOffExecuted:`Se ejecutó el apagado automático - encienda la impresora para restablecer`,hmsErrors:`Errores HMS`,viewHmsErrors:`Ver {{count}} error(es) HMS`,resume:`Reanudar`,pause:`Pausar`,stop:`Detener`,camera:`Cámara`,skipObject:`Omitir objeto`,reconnect:`Reconectar`,forceRefresh:`Forzar actualización`,forceRefreshSuccess:`Actualización solicitada`,mqttDebug:`Depuración MQTT`,printerInformation:`Información de la impresora`,copyToClipboard:`Copiar`,copied:`¡Copiado!`,state:`Estado`,wifiSignalLabel:`Señal Wi-Fi`,developerMode:`Modo desarrollador`,enabled:`Activado`,disabled:`Desactivado`,addedOn:`Añadida`,sdCard:`Tarjeta SD`,inserted:`Insertada`,notInserted:`No insertada`,totalPrintHours:`Horas de impresión`,activeNozzle:`Activa: boquilla {{nozzle}}`,amsSwitchInletTooltip:`Conmutador de ruta de filamento IN-{{inlet}} ({{side}}): alimenta ambas boquillas`,nozzleRack:`Soporte de boquillas`,nozzleDocked:`Acoplada`,nozzleMounted:`Montada`,nozzleActive:`Activa`,nozzleIdle:`Inactiva`,nozzleDiameter:`Diámetro`,nozzleType:`Tipo`,nozzleStatus:`Estado`,nozzleFilament:`Filamento`,nozzleWear:`Desgaste`,nozzleMaxTemp:`Temp. máx.`,nozzleSerial:`Serie`,nozzleHardenedSteel:`Acero endurecido`,nozzleStainlessSteel:`Acero inoxidable`,nozzleTungstenCarbide:`Carburo de tungsteno`,nozzleFlow:`Flujo`,nozzleHighFlow:`Flujo alto`,nozzleStandardFlow:`Estándar`,firmwareUpdate:`Actualización de firmware`,firmwareInstructions:`En la pantalla táctil de la impresora, vaya a`,firmwareNav:`Navegue hasta`,settings:`Ajustes`,firmware:`Firmware`,discoverPrinters:`Detectar impresoras`,searching:`Buscando...`,manualEntry:`Entrada manual`,addFromCloud:`Añadir desde la nube`,toast:{printerDeleted:`Impresora eliminada`,missingSpoolAssignment:`Impresión iniciada en {{printer}}. Falta la asignación de bobina para: {{slots}}`,killSwitchTriggered:`El interruptor de seguridad de facturación detuvo una impresión no autorizada en {{printer}}: {{filename}}`,billingChargeFailed:`La facturación de {{filename}} en {{printer}} ha fallado. Se conservó la reserva de presupuesto; revisa los registros del servidor.`,assignmentVerified:`Filamento cargado en la ranura {{slot}} ({{printer}})`,assignmentVerifiedNoKprofile:`Ranura {{slot}} en {{printer}} cargada, pero no se aplicó el perfil de calibración de flujo (perfil K)`,assignmentNotConfirmed:`No se pudo confirmar la asignación de la ranura {{slot}} en {{printer}}: revisa la ranura AMS`,printerAdded:`Impresora añadida`,printerUpdated:`Impresora actualizada`,failedToDelete:`Error al eliminar la impresora`,failedToAdd:`Error al añadir la impresora`,connectionFailedNotAdded:`No se pudo conectar con la impresora. Verifique la IP, el número de serie y el código de acceso, y confirme que el modo solo LAN está activado. La impresora no se añadió.`,failedToUpdate:`Error al actualizar la impresora`,commandSent:`Comando enviado`,failedToSendCommand:`Error al enviar el comando`,turnedOn:`{{name}} encendida`,failedToPowerOn:`Error al encender {{name}}`,scriptTriggered:`Script ejecutado`,printStopped:`Impresión detenida`,printPaused:`Impresión en pausa`,printResumed:`Impresión reanudada`,referenceDeleted:`Referencia eliminada`,detectionAreaSaved:`Área de detección guardada`,failedToRunScript:`Error al ejecutar el script`,failedToStopPrint:`Error al detener la impresión`,failedToPausePrint:`Error al pausar la impresión`,failedToResumePrint:`Error al reanudar la impresión`,failedToControlChamberLight:`Error al controlar la luz de la cámara`,failedToSetSpeed:`Error al establecer la velocidad de impresión`,failedToUpdateSetting:`Error al actualizar el ajuste`,failedToSkipObjects:`Error al omitir objetos`,failedToRereadRfid:`Error al releer el RFID`,failedToCheckPlate:`Error al comprobar la cama`,failedToUpdateLabel:`Error al actualizar la etiqueta`,failedToDeleteReference:`Error al eliminar la referencia`,failedToSaveDetectionArea:`Error al guardar el área de detección`,plateCheckEnabled:`Comprobación de cama activada`,plateCheckDisabled:`Comprobación de cama desactivada`,calibrationSaved:`¡Calibración guardada!`,calibrationFailed:`Error en la calibración`,rfidRereadInitiated:`Relectura de RFID iniciada`,loadInitiated:`Cargando filamento…`,unloadInitiated:`Descargando filamento…`,failedToLoad:`Error al cargar el filamento`,failedToUnload:`Error al descargar el filamento`},connection:{connected:`Conectada`,offline:`Desconectada`},plateStatus:{markCleared:`Marcar cama como despejada`,cleared:`Cama despejada`,notCleared:`Cama no despejada`,inUse:`Cama en uso`},queue:{inQueue:`{{count}} impresión en cola`,inQueue_plural:`{{count}} impresiones en cola`},controls:`Controles`,rfid:{reread:`Releer RFID`},ams:{load:`Cargar`,unload:`Descargar`,feedTitle:`¿En qué boquilla cargar {{slot}}?`,feedPrompt:`El Filament Track Switch puede dirigir esta ranura a cualquiera de los dos hotends. Elige cuál alimentar.`,feedLeft:`Boquilla izquierda`,feedRight:`Boquilla derecha`,feedAlreadyLoaded:`Ya cargado`,switchNotReady:`El Filament Track Switch aún no está configurado. Asigna cada AMS a una entrada en la impresora e inténtalo de nuevo.`},bedJog:{limitWarning:`Los límites de recorrido no se aplican en los movimientos manuales: un error del firmware de Bambu ignora los finales de carrera por software en los comandos remotos. Muévelo con cuidado para evitar colisiones.`,title:`Controles de movimiento`,bed:`Cama`,step:`Paso (mm)`,up:`Subir la cama`,down:`Bajar la cama`,toolheadUp:`Subir el cabezal`,toolheadDown:`Bajar el cabezal`,disabledWhilePrinting:`Desactivado durante la impresión`,notHomedTitle:`La impresora no está en posición de origen`,notHomedMessage:`La impresora no se ha llevado a su posición de origen desde la última impresión. Ejecute el autoorigen primero para un posicionamiento seguro (estaciona el cabezal y luego lleva X, Y y Z al origen), o mueva de todos modos — los finales de carrera por software se omitirán.`,homeZ:`Autoorigen`,moveAnyway:`Mover de todos modos`,homingStarted:`Llevando la impresora al origen…`},permission:{noAdd:`No tiene permiso para añadir impresoras`,noEdit:`No tiene permiso para editar impresoras`,noDelete:`No tiene permiso para eliminar impresoras`,noControl:`No tiene permiso para controlar impresoras`,noFiles:`No tiene permiso para acceder a los archivos de la impresora`,noAmsRfid:`No tiene permiso para releer el RFID del AMS`,noSmartPlugControl:`No tiene permiso para controlar enchufes inteligentes`,noCamera:`No tiene permiso para ver las cámaras`},modal:{addTitle:`Añadir impresora`,editTitle:`Editar impresora`,myPrinter:`Mi impresora`,selectModel:`Seleccionar modelo...`,locationGroup:`Ubicación / Grupo (opcional)`,locationPlaceholder:`p. ej., Taller, Oficina, Sótano`,autoArchiveLabel:`Archivar automáticamente las impresiones completadas`,fromPrinterSettings:`Desde los ajustes de la impresora`,modelOptional:`Modelo (opcional)`,saveChanges:`Guardar cambios`},skipObjects:{tooltip:`Omitir objetos`,onlyWhilePrinting:`Omitir objetos (solo durante la impresión)`,requiresMultiple:`Omitir objetos (requiere 2 o más objetos)`,title:`Omitir objetos`,matchIdsInfo:`Haga coincidir los ID con la pantalla de su impresora`,printerShowsIds:`La pantalla de la impresora muestra los ID de los objetos en la cama de impresión`,skipSelected:`Omitir seleccionados`,skipping:`Omitiendo...`,noObjectsSelected:`No hay objetos seleccionados`,selectObjectsToSkip:`Seleccione los objetos que desea omitir de la impresión actual`,skipped:`omitidos`,objectsSkipped:`Objetos omitidos`,activeCount:`{{count}} activos`,waitForLayer:`Espere a la capa 2 o superior para omitir objetos (capa actual {{layer}})`,skip:`Omitir`,confirmTitle:`¿Omitir objeto?`,confirmMessage:`¿Está seguro de que desea omitir "{{name}}"? Esto no se puede deshacer.`,confirmAllMessage:`Se han seleccionado todos los objetos restantes. Esto detendrá el trabajo de impresión. ¿Continuar?`,confirmMultipleMessage:`¿Omitir {{count}} objetos seleccionados? Esto no se puede deshacer.`},confirm:{deleteTitle:`Eliminar impresora`,deleteMessage:`¿Está seguro de que desea eliminar "{{name}}"? Esto eliminará todos los ajustes de conexión.`,deleteArchivesNote:`Todo el historial de impresión de esta impresora se eliminará permanentemente.`,keepArchivesNote:`El historial de impresión se conservará pero ya no estará asociado a esta impresora.`,stopTitle:`Detener impresión`,stopMessage:`¿Está seguro de que desea detener la impresión actual en "{{name}}"? Esto cancelará el trabajo de impresión.`,stopButton:`Detener impresión`,pauseTitle:`Pausar impresión`,pauseMessage:`¿Está seguro de que desea pausar la impresión actual en "{{name}}"?`,pauseButton:`Pausar impresión`,resumeTitle:`Reanudar impresión`,resumeMessage:`¿Está seguro de que desea reanudar la impresión en "{{name}}"?`,resumeButton:`Reanudar impresión`,powerOnTitle:`Encender impresora`,powerOnMessage:`¿Está seguro de que desea ENCENDER "{{name}}"?`,powerOnButton:`Encender`,powerOffTitle:`Apagar impresora`,powerOffMessage:`¿Está seguro de que desea APAGAR "{{name}}"?`,powerOffWarning:`ADVERTENCIA: ¡"{{name}}" está imprimiendo actualmente! ¿Está seguro de que desea APAGARLA? Esto interrumpirá la impresión y podría dañar la impresora.`,powerOffButton:`Apagar`,haToggleTitle:`Conmutar "{{name}}"`,haToggleMessage:`¿Conmutar la entidad de Home Assistant {{entity}}? Esto puede apagarla si está encendida actualmente.`,haToggleWarning:`ADVERTENCIA: ¡"{{name}}" está imprimiendo actualmente! Conmutar {{entity}} puede cortar la corriente e interrumpir la impresión. ¿Continuar?`,haToggleButton:`Conmutar`},bulk:{select:`Seleccionar`,selectAll:`Seleccionar todo`,selectByLocation:`Seleccionar por ubicación`,selected:`{{count}} seleccionadas`,actions:{stop:`Detener`,pause:`Pausar`,resume:`Reanudar`,clearPlate:`Despejar cama`,clearHMS:`Borrar notificaciones`},confirm:{stopTitle:`Detener {{count}} impresiones`,stopMessage:`Esto cancelará las impresiones activas en {{count}} impresora(s). Esta acción no se puede deshacer.`,stopButton:`Detener todo`,pauseTitle:`Pausar {{count}} impresiones`,pauseMessage:`Esto pausará las impresiones activas en {{count}} impresora(s).`,pauseButton:`Pausar todo`,clearPlateTitle:`Despejar {{count}} camas de impresión`,clearPlateMessage:`Esto despejará la cama de impresión en {{count}} impresora(s) y puede activar trabajos en cola.`,clearPlateButton:`Despejar todo`},success:`{{action}} completado en {{count}} impresora(s)`,partial:`{{succeeded}} con éxito, {{failed}} con error`,noneApplicable:`Ninguna de las impresoras seleccionadas está en el estado adecuado para esta acción`,selectByState:`Seleccionar por estado`},discovery:{title:`Detectar impresoras`,searching:`Buscando...`,scanning:`Escaneando...`,scanProgress:`Escaneando... {{scanned}}/{{total}}`,foundPrinters:`Se encontraron {{count}} impresora(s)`,noPrintersFound:`No se encontraron impresoras`,noPrintersFoundSubnet:`No se encontraron impresoras en la subred especificada.`,noPrintersFoundNetwork:`No se encontraron impresoras en la red.`,allConfigured:`Todas las impresoras detectadas ya están configuradas.`,alreadyAdded:`Ya añadida`,select:`Seleccionar`,manualEntry:`Entrada manual`,addFromCloud:`Añadir desde la nube`,subnetToScan:`Subred a escanear`,dockerNote:`Docker detectado. Introduzca la subred de su impresora en notación CIDR. Requiere network_mode: host en docker-compose.yml.`,scanSubnet:`Escanear subred en busca de impresoras`,discoverNetwork:`Detectar impresoras en la red`,scanningSubnet:`Escaneando la subred en busca de impresoras Bambu...`,scanningNetwork:`Escaneando la red...`,serialRequired:`Número de serie obligatorio`,unknown:`Desconocido`,failedToStart:`Error al iniciar la detección`,customSubnetOption:`Subred personalizada...`,customSubnetLabel:`Subred personalizada (CIDR)`,customSubnetNote:`Usa una subred personalizada si tu impresora está en una red distinta a la de este servidor. Los puertos FTP (990) y MQTT (8883) deben ser accesibles a través del límite de enrutamiento.`},drying:{start:`Iniciar secado`,stop:`Detener secado`,temperature:`Temperatura`,duration:`Duración`,hours:`horas`,timeRemaining:`{{time}} restante`,active:`Secando`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`Secado no compatible`,powerRequired:`Conecte el adaptador de corriente del AMS para activar el secado`,cannotDryNow:`El AMS no puede iniciar el secado en este momento`,startingDrying:`Iniciando el secado...`,toastCommandSent:`Comando de secado enviado`,toastStopped:`Secado detenido`,toastNotStarted:`La impresora aceptó el comando, pero el AMS no inició el secado. Comprueba que el adaptador de corriente del AMS esté conectado y que la impresora esté inactiva.`,screenOnly:`En esta impresora, el secado del AMS solo se puede controlar desde la pantalla de la propia impresora (limitación de Bambu)`,stoppingDrying:`Deteniendo el secado...`,rotateTray:`Girar la bobina durante el secado`,rotateUnavailableReason:`No disponible — un slot de este AMS está cargado hacia el cabezal. La bobina está bloqueada por el tubo de alimentación y no puede girar. Retira el filamento primero.`,startMode:`Hora de inicio`,modeNow:`Ahora`,modeDelay:`Tras un retraso`,modeAtTime:`A una hora`,schedule:`Programar`,scheduledFor:`Secado programado para {{time}}`,scheduledAsap:`Secado programado (esperando la impresora)`,cancelScheduled:`Cancelar secado programado`,scheduleFailed:`No se pudo programar el secado`,retractFilament:`Retire el filamento de la salida del AMS para iniciar el secado`,waitingAmsNotFound:`Esperando a que se detecte el AMS`,waitingOffline:`Esperando a que la impresora se conecte`,waitingPrinterBusy:`Esperando a que la impresora esté libre`,waitingAlreadyDrying:`Esperando a que termine el ciclo de secado actual`,waitingInterrupted:`Interrumpido, se reanudará cuando la impresora esté libre`,scheduleFailedReason:`El secado programado falló: {{reason}}`,scheduleFailedUnknown:`Error desconocido`,dismissFailed:`Descartar`},amsBackup:{titleOn:`AMS Filament Backup está ACTIVADO. Haz clic para desactivar.`,titleOff:`AMS Filament Backup está DESACTIVADO. Haz clic para activar.`,titleUnknown:`Estado de AMS Filament Backup no disponible en esta impresora.`,toastEnabled:`AMS Filament Backup activado`,toastDisabled:`AMS Filament Backup desactivado`,modalTitle:`AMS Filament Backup`,modalHelp:`Cuando el slot activo se agota, la impresora rota a slots con el mismo preset y color en este orden.`,modalNoSlots:`Sin filamento cargado.`,modalNoPairs:`No hay pares de respaldo — no hay dos slots que compartan preset y color.`,extruderRightShort:`D`,extruderLeftShort:`I`,stateOn:`Activado`,stateOff:`Desactivado`,stateUnknown:`No compatible con esta impresora`},activeJobSlot:{title:`Este slot es el filamento {{n}} en la impresión activa`,ariaLabel:`Slot de impresión activa {{n}}`},expectedSlot:{title:`La impresora está esperando filamento en este slot`,ariaLabel:`Slot de filamento esperado {{n}}`,label:`{{ams}} · Slot {{slot}}`,external:`Bobina externa`},filaments:`Filamentos`,externalSpool:{hide:`Ocultar bobina externa`,show:`Mostrar bobina externa`},openCameraOverlay:`Abrir la cámara superpuesta`,openCameraWindow:`Abrir la cámara en una ventana nueva`,firmwareUpdateAvailable:`Actualización de firmware disponible: {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — Actualizado`,firmwareUpdateButton:`Actualizar`,plateDetection:{noPermission:`No tiene permiso para actualizar impresoras`,enabledClick:`Comprobación de cama activada - Haga clic para desactivar`,disabledClick:`Comprobación de cama desactivada - Haga clic para activar`,manageCalibration:`Gestionar la calibración de detección de cama`,calibrationRequired:`Calibración necesaria`,calibrationInstructions:`Asegúrese de que la cama de impresión esté <strong>completamente vacía</strong> y luego haga clic en Calibrar.`,calibrationDescription:`La calibración captura una imagen de referencia de la cama vacía. Las comprobaciones futuras se compararán con esta referencia para detectar objetos.`,calibrationTip:`<strong>Consejo:</strong> puede almacenar hasta 5 calibraciones para distintas camas. El sistema usa automáticamente la mejor coincidencia al comprobar.`,plateEmpty:`La cama parece estar vacía`,objectsDetected:`Objetos detectados en la cama`,confidence:`Confianza`,difference:`Diferencia`,analysisPreview:`Vista previa del análisis:`,analysisLegend:`Recuadro verde = área de detección, Superposición roja = diferencias respecto a la calibración`,savedReferences:`Referencias guardadas ({{count}}/{{max}})`,deleteReference:`Eliminar referencia`,labelPlaceholder:`Etiqueta...`,clickToEdit:`{{label}} - Haga clic para editar`,clickToAddLabel:`Haga clic para añadir una etiqueta`},speed:{title:`Velocidad de impresión`,silent:`Silencioso (50%)`,standard:`Estándar (100%)`,sport:`Sport (124%)`,ludicrous:`Ludicrous (166%)`},airduct:{title:`Modo de conducto de aire`,cooling:`Refrigeración`,heating:`Calentamiento`},noSdCard:`Sin SD`,door:{open:`Abierta`,closed:`Cerrada`},fans:{partCooling:`Ventilador de refrigeración de piezas`,auxiliary:`Ventilador auxiliar`,leftAuxiliary:`Ventilador auxiliar izquierdo`,exhaust:`Extracción`,chamber:`Ventilador de la cámara`},clickToViewHmsErrors:`Haga clic para ver los errores HMS`,aiDetection:{safe:`Seguro`,warning:`Advertencia`,failure:`Fallo`,idle:`Inactiva`,error:`Sin comprobar`,unknown:`Iniciando`,tooltipError:`La detección de fallos por IA no está comprobando esta impresión: {{reason}} - haga clic para más detalles`,tooltipUnknown:`Detección de fallos por IA: esperando el primer resultado - haga clic para más detalles`,errorHint:`Esta impresión no se está comprobando. La detección se reanudará automáticamente cuando se solucione el problema indicado abajo.`,tooltip:`Detección de fallos por IA: {{status}} (puntuación {{score}}) - haga clic para más detalles`,tooltipIdle:`Detección de fallos por IA activada - la supervisión comienza con la próxima impresión - haga clic para más detalles`,modalTitle:`Detección de fallos por IA - {{name}}`,currentStatus:`Estado`,score:`Puntuación`,framesAnalyzed:`Fotogramas analizados`,idleHint:`Ahora mismo no se supervisa ninguna impresión. La supervisión comienza automáticamente con la próxima impresión.`,lastError:`Último error`,openSettings:`Abrir ajustes`},estimatedCompletion:`Hora estimada de finalización`,plateNumber:`Cama {{number}}`,slotOptions:`Opciones de la ranura`,amsPopup:{friendlyName:`Nombre del AMS`,friendlyNamePlaceholder:`p. ej. Nombre descriptivo del AMS`,serialNumber:`Número de serie`,firmwareVersion:`Firmware`,save:`Guardar`,clear:`Borrar`,noEditPermission:`No tiene permiso para renombrar unidades AMS`},firmwareModal:{title:`Actualización de firmware`,titleUpToDate:`Información del firmware`,currentVersion:`Actual:`,latestVersion:`Más reciente:`,releaseNotes:`Notas de la versión`,checkingPrereqs:`Comprobando los requisitos previos...`,sdCardReady:`Tarjeta SD lista. Haga clic abajo para subir el firmware.`,uploadedSuccess:`¡Firmware subido a la tarjeta SD!`,applyInstructions:`Para aplicar la actualización en su impresora:`,step1:`En la pantalla táctil de la impresora, vaya a <strong>Ajustes</strong>`,step2:`Navegue hasta <strong>Firmware</strong>`,step3:`Seleccione <strong>Actualizar desde tarjeta SD</strong>`,step4:`La actualización tardará entre 10 y 20 minutos`,done:`Hecho`,starting:`Iniciando...`,uploadFirmware:`Subir firmware`,uploadFailed:`Error al iniciar la subida: {{error}}`,uploadedToast:`¡Firmware subido! Inicie la actualización desde la pantalla de la impresora.`,availableVersions:`Versiones disponibles`,usable:`Utilizable`,unavailable:`No disponible`,installed:`Instalada`,newerBadge:`más reciente`,olderBadge:`más antigua`,currentBadge:`actual`},accessCodePlaceholder:`Dejar vacío para conservar el actual`,roi:{title:`Área de detección (ROI)`,xStart:`Inicio X`,yStart:`Inicio Y`,width:`Anchura`,height:`Altura`,instruction:`Ajuste el área de detección para centrarse en la cama de impresión. El recuadro verde de la vista previa muestra el área actual.`},developerModeWarning:`El modo desarrollador LAN no está activado en: {{names}}. Es posible que algunas funciones no funcionen.`,howToEnable:`Cómo activarlo`,incompatibleFile:`Este archivo se laminó para {{slicedFor}}, pero esta impresora es una {{printerModel}}`,dropNotPrintable:`Solo se pueden imprimir archivos .gcode y .gcode.3mf`,dropToPrint:`Suelte para imprimir`,dropToQueue:`Suelte para poner en cola`},archives:{media:{title:`Vídeos de la impresión`,download:`Descargar vídeos de la impresión`,searching:`Buscando vídeos en la impresora…`,searchFailed:`No se pudieron buscar vídeos en la impresora.`,none:`No se encontraron vídeos timelapse ni fragmentos de cámara IP para esta impresión.`,attachedTimelapse:`Timelapse adjunto`,printerFiles:`Archivos que aún están en la impresora`,downloadSelected:`Descargar seleccionados`,printerMissing:`La impresora ya no está configurada`,timelapseUnavailable:`No se pudo leer el directorio de timelapses`,ipcamUnavailable:`No se pudo leer el directorio de la cámara IP`},title:`Archivos de impresión`,no3mfBanner:{title:`Algunas impresiones recientes no se pudieron archivar con miniaturas`,body:`El slicer no dejó el archivo .gcode.3mf en la tarjeta SD de la impresora, así que Bambuddy no pudo recuperar ni la miniatura ni los metadatos del slicer. Esto suele deberse a que "Almacenar archivos enviados en almacenamiento externo" está desactivado en el slicer (pestaña Dispositivo de Bambu Studio / OrcaSlicer).`,docsLink:`Ver paso 4 de instalación`,docsLinkInternalStorage:`Por qué ocurre`,titleInternalStorage:`Algunas impresiones recientes se quedaron en el almacenamiento interno de la impresora`,bodyInternalStorage:`Bambu Studio guardó el archivo laminado en el almacenamiento interno de la impresora en lugar de la tarjeta, así que Bambuddy no tenía nada que leer por FTP. En la serie H2, la P2S y la X2D su botón «Imprimir» siempre lo hace: solo «Enviar» ofrece elección, y también viene con «Caché» por defecto. Esas impresiones se siguen archivando con su nombre y sus tiempos, solo que sin miniatura ni metadatos del laminador. Para archivos completos, inicia la impresión desde Bambuddy o lamina en OrcaSlicer, o bien en Bambu Studio usa «Enviar» con «Externo» y luego inicia la impresión. Todas requieren una tarjeta o memoria en la impresora.`,titleNoExternalStorage:`Algunas impresiones recientes no se pudieron archivar — no hay almacenamiento en la impresora`,bodyNoExternalStorage:`La impresora no detecta ninguna tarjeta ni memoria en su ranura, así que el archivo laminado no tenía dónde aterrizar y Bambuddy nada que leer. Inserte una y la próxima impresión se archivará por completo.`,titleInternalHistory:`Algunas impresiones recientes se iniciaron desde un archivo que ya estaba en la impresora`,bodyInternalHistory:`Esas impresiones salieron de la propia biblioteca de la impresora: una reimpresión desde su pantalla, un inicio desde Handy o un archivo enviado antes e impreso después. Bambuddy lee los archivos de impresión por FTP, que solo sirve la tarjeta o la memoria, mientras que la impresora guarda esa biblioteca en una zona que FTP no alcanza, así que no había ningún 3MF que leer. Ninguna opción del laminador cambia esto, porque para estas impresiones no se envió nada. Se siguen archivando con su nombre y sus tiempos, y «Editar archivo» permite anotar a mano el filamento usado. Para un archivo completo, inicia la impresión desde Bambuddy o desde tu laminador.`,titleFtpsCooloff:`Algunas impresiones recientes no se pudieron archivar — la impresora rechazó la conexión de archivos`,bodyFtpsCooloff:`Bambuddy abrió el puerto de transferencia de archivos de la impresora (FTPS 990) y la impresora respondió con algo que no es TLS, así que no se pudo leer nada de ella. Esas impresiones siguen archivadas con su nombre y sus tiempos, solo que sin miniatura ni metadatos del laminador. No es un ajuste del laminador ni algo que usted haya cambiado — los mismos modelos y firmware funcionan con normalidad en otras instalaciones, y una impresora afectada suele volver a funcionar sola más tarde. Tras un fallo así, Bambuddy pausa las transferencias a esa impresora durante cinco minutos y vuelve a por el archivo cuando termina la pausa, de modo que un episodio breve se resuelve por sí solo; una ficha que sigue vacía significa que el rechazo duró más que el reintento. Todavía no se sabe qué lo provoca. Si se repite, active el registro de depuración en la página Sistema y adjunte un paquete de soporte a su informe.`,titleFtpTransferFailed:`Algunas impresiones recientes no se pudieron archivar: la transferencia del archivo agotó su tiempo`,bodyFtpTransferFailed:`El archivo laminado estaba en la tarjeta de la impresora y la impresora lo sirvió, pero la transferencia no terminó en el tiempo permitido. Al iniciar la impresión la impresora también atiende su cámara, sus mensajes de estado y la subida del trabajo, y un 3MF grande no siempre consigue pasar con todo eso. Esas impresiones siguen archivadas con su nombre y sus tiempos, solo que sin miniatura ni metadatos del laminador. No es un ajuste del laminador ni algo que usted haya cambiado. Bambuddy vuelve a por el archivo tres veces durante los diez minutos siguientes, así que la mayoría se completan solas; una tarjeta que sigue vacía significa que todos esos intentos también agotaron su tiempo. Si se repite, aumente Tiempo de espera de conexión en Ajustes > Red > Reintento FTP.`,dismissLabel:`Descartar este aviso`},searchPlaceholder:`Buscar archivos...`,filterByPrinter:`Filtrar por impresora`,filterByStatus:`Filtrar por estado`,sortBy:`Ordenar por`,sortNewest:`Más recientes primero`,sortOldest:`Más antiguos primero`,sortName:`Nombre`,sortDuration:`Duración`,sortLargest:`Mayores primero`,sortSmallest:`Menores primero`,sortSize:`Tamaño`,noArchives:`No se encontraron archivos`,noArchivesSearch:`Ningún archivo coincide con su búsqueda`,originalPrintNotVisible:`La impresión original no está visible - pruebe a borrar los filtros`,noArchivesYet:`Aún no hay archivos`,prints:`impresiones`,pagination:{showing:`Mostrando`,to:`a`,of:`de`,show:`Mostrar`,page:`Página`,all:`Todos`},loadingArchives:`Cargando archivos...`,releaseToUpload:`Suelte para subir`,showAll:`Mostrar todos`,showFavoritesOnly:`Mostrar solo favoritos`,gridView:`Vista de cuadrícula`,listView:`Vista de lista`,calendarView:`Vista de calendario`,logView:`Registro de impresión`,manageTags:`Gestionar etiquetas`,showFailedPrints:`Mostrar impresiones fallidas`,hideFailedPrints:`Ocultar impresiones fallidas`,hideDuplicates:`Ocultar duplicados`,viewOriginalPrint:`Haga clic para ver la impresión original (n.º {{id}})`,printTime:`Tiempo de impresión`,filamentUsed:`Filamento usado`,cost:`Coste`,preview:`Vista previa`,deleteArchive:`Eliminar archivo`,deleteConfirm:`¿Está seguro de que desea eliminar este archivo?`,favorite:`Favorito`,unfavorite:`Quitar de favoritos`,viewDetails:`Ver detalles`,status:{completed:`Completada`,failed:`Fallida`,stopped:`Detenida`},toast:{source3mfAttached:`3MF de origen adjuntado: {{filename}}`,failedUploadSource3mf:`Error al subir el 3MF de origen`,source3mfRemoved:`3MF de origen eliminado`,failedRemoveSource3mf:`Error al eliminar el 3MF de origen`,f3dAttached:`F3D adjuntado: {{filename}}`,failedUploadF3d:`Error al subir el F3D`,f3dRemoved:`F3D eliminado`,failedRemoveF3d:`Error al eliminar el F3D`,timelapseAttached:`Time-lapse adjuntado: {{filename}}`,timelapseAlreadyAttached:`El time-lapse ya está adjuntado`,noMatchingTimelapse:`No se encontró ningún time-lapse coincidente`,failedScanTimelapse:`Error al buscar el time-lapse`,failedAttachTimelapse:`Error al adjuntar el time-lapse`,timelapseRemoved:`Time-lapse eliminado`,failedRemoveTimelapse:`Error al eliminar el time-lapse`,timelapseUploaded:`Time-lapse subido: {{filename}}`,failedUploadTimelapse:`Error al subir el time-lapse`,archiveDeleted:`Archivo eliminado`,failedDeleteArchive:`Error al eliminar el archivo`,addedToFavorites:`Añadido a favoritos`,removedFromFavorites:`Quitado de favoritos`,projectUpdated:`Proyecto actualizado`,failedUpdateProject:`Error al actualizar el proyecto`,linkCopied:`Enlace copiado al portapapeles`,failedCopyLink:`Error al copiar el enlace`,photoDeleted:`Foto eliminada`,failedDeletePhoto:`Error al eliminar la foto`,failedDeleteArchives:`Error al eliminar los archivos`,failedUpdateFavorites:`Error al actualizar los favoritos`,exportDownloaded:`Exportación descargada`,exportFailed:`Error en la exportación`},menu:{print:`Imprimir`,openInBambuStudio:`Abrir en el laminador`,slice:`Laminar`,externalLink:`Enlace externo`,viewOnMakerWorld:`Ver en MakerWorld`,preview3d:`Vista previa 3D`,viewTimelapse:`Ver time-lapse`,scanForTimelapse:`Buscar time-lapse`,uploadTimelapse:`Subir time-lapse`,removeTimelapse:`Eliminar time-lapse`,downloadSource3mf:`Descargar 3MF de origen`,uploadSource3mf:`Subir 3MF de origen`,replaceSource3mf:`Reemplazar 3MF de origen`,removeSource3mf:`Eliminar 3MF de origen`,uploadF3d:`Subir F3D`,replaceF3d:`Reemplazar F3D`,downloadF3d:`Descargar F3D`,removeF3d:`Eliminar F3D`,download:`Descargar`,copyDownloadLink:`Copiar enlace de descarga`,qrCode:`Código QR`,viewPhotos:`Ver fotos`,viewPhotosCount:`Ver fotos ({{count}})`,projectPage:`Página del proyecto`,addToFavorites:`Añadir a favoritos`,removeFromFavorites:`Quitar de favoritos`,edit:`Editar`,printLog:`Registro de impresión`,goToProject:`Ir al proyecto: {{name}}`,addToProject:`Añadir al proyecto`,removeFromProject:`Quitar del proyecto`,loading:`Cargando...`,noProjectsAvailable:`No hay proyectos disponibles`,searchProjects:`Buscar proyectos…`,select:`Seleccionar`,deselect:`Deseleccionar`,delete:`Eliminar`},permission:{noReprint:`No tiene permiso para reimprimir este archivo`,noAddToQueue:`No tiene permiso para añadir a la cola`,noUpdateArchives:`No tiene permiso para actualizar archivos`,noUploadFiles:`No tiene permiso para subir archivos`,noDownload:`No tiene permiso para descargar archivos`,noCopyLink:`No tiene permiso para copiar enlaces de descarga`,noDelete:`No tiene permiso para eliminar este archivo`,noEdit:`No tiene permiso para editar esta entrada`,noCreate:`No tiene permiso para crear archivos`},platePicker:{title:`Seleccione la cama para la vista previa`,hint:`Este archivo tiene varias camas. Elija una para abrirla en el visor de G-code.`,plateLabel:`Cama {{index}}`,objectCount:`{{count}} objeto`,objectCount_plural:`{{count}} objetos`,noGcode:`Este archivo no tiene G-code laminado para previsualizar. Ábralo en Bambu Studio para laminarlo primero.`},card:{previousPlate:`Cama anterior`,nextPlate:`Cama siguiente`,plateNumber:`Cama {{index}}`,moreOptions:`Haga clic con el botón derecho para más opciones`,addToFavorites:`Añadir a favoritos`,removeFromFavorites:`Quitar de favoritos`,cancelled:`cancelada`,failed:`fallida`,duplicate:`duplicado`,duplicateTitle:`Este modelo ya se ha impreso anteriormente`,openSource3mf:`Abrir el 3MF de origen en Bambu Studio (clic derecho para más opciones)`,downloadF3d:`Descargar el archivo de diseño de Fusion 360`,viewTimelapse:`Ver time-lapse`,viewPhoto:`Ver 1 foto`,viewPhotos:`Ver {{count}} fotos`,openFolder:`Abrir carpeta: {{name}}`,slicedFile:`Archivo laminado - listo para imprimir`,sourceFile:`Solo archivo de origen - no hay mapeo de AMS disponible`,gcode:`GCODE`,source:`ORIGEN`,project:`Proyecto: {{name}}`,runsBadge:`{{count}} impresiones`,runsBadgeTitle:`{{count}} impresiones en total — {{successful}} con éxito, {{failed}} fallidas. Haga clic para ver el registro completo de impresión.`,estimated:`Estimado: {{time}}`,actual:`Real: {{time}}`,accuracy:`Precisión: {{percent}}%`,filament:`{{weight}} g`,layer:`{{count}} capa`,layers:`{{count}} capas`,object:`{{count}} objeto`,objects:`{{count}} objetos`,slicedFor:`Laminado para {{model}}`,uploadedBy:`Subido por`,noPermissionReprint:`No tiene permiso para reimprimir`,noFileForReprint:`No hay archivo 3MF disponible — no se pudo descargar el archivo de la impresora cuando se registró la impresión`,slicerAmsMapping:`Mapeo de AMS guardado ({{printer}})`,slicerAmsMappingTooltip:`La elección de ranura AMS del slicer se guardó para {{printer}}. Los números de ranura solo significan algo en esa impresora, así que una reimpresión los reutiliza únicamente si vuelve a dirigirse a {{printer}}.`,noPermissionEdit:`No tiene permiso para editar archivos`,noPermissionDelete:`No tiene permiso para eliminar archivos`,openInBambuStudio:`Abrir en el laminador`,openInBambuStudioToSlice:`Abrir en el laminador para laminar`,slice:`Laminar`,externalLink:`Enlace externo`,makerWorld:`MakerWorld: {{designer}}`,viewProject:`Ver proyecto`,noExternalLink:`Sin enlace externo`,preview3d:`Vista previa 3D`,download:`Descargar`,edit:`Editar`,delete:`Eliminar`},runLog:{title:`Registro de impresión`,modalTitle:`Registro de impresión — {{name}}`,modalTitleFallback:`este archivo`,empty:`Aún no se han registrado eventos de impresión para este archivo.`,col:{date:`Fecha`,status:`Estado`,duration:`Duración`,filament:`Filamento`,cost:`Coste`},status:{completed:`Completada`,failed:`Fallida`,cancelled:`Cancelada`,stopped:`Detenida`,skipped:`Omitida`,printing:`Imprimiendo`}},modal:{deleteArchive:`Eliminar archivo`,deleteConfirm:`¿Está seguro de que desea eliminar "{{name}}"? Esta acción no se puede deshacer.`,deleteButton:`Eliminar`,deletePurgeStats:`Eliminar también esta impresión de las estadísticas rápidas (filamento, tiempo, coste, energía)`,deleteQueueItemsWarning:`También se eliminarán {{count}} elemento(s) de la cola vinculado(s) a este archivo.`,deleteBlockedByPrinting:`No se puede eliminar — {{count}} elemento(s) de la cola se están imprimiendo. Detén la impresión primero y vuelve a intentarlo.`,removeSource3mf:`Eliminar 3MF de origen`,removeSource3mfConfirm:`¿Está seguro de que desea eliminar el archivo 3MF de origen de "{{name}}"? Esto eliminará el archivo de proyecto original del laminador.`,removeButton:`Eliminar`,removeF3d:`Eliminar F3D`,removeF3dConfirm:`¿Está seguro de que desea eliminar el archivo de diseño de Fusion 360 de "{{name}}"?`,removeTimelapse:`Eliminar time-lapse`,removeTimelapseConfirm:`¿Está seguro de que desea eliminar el vídeo time-lapse de "{{name}}"?`,timelapse:`{{name}} - Time-lapse`,selectTimelapse:`Seleccionar time-lapse`,selectTimelapseDesc:`No se encontró ninguna coincidencia automática. Seleccione el time-lapse para esta impresión:`,deleteArchives:`Eliminar archivos`,deleteArchivesConfirm:`¿Está seguro de que desea eliminar {{count}} archivo(s)? Esta acción no se puede deshacer.`,deleteCount:`Eliminar {{count}}`},page:{title:`Archivos`,printsCount:`{{filtered}} de {{total}} impresiones`,dropFilesHere:`Suelte aquí los archivos .3mf`,releaseToUpload:`Suelte para subir`,only3mfSupported:`Solo se admiten archivos .3mf`,close:`Cerrar`,selected:`{{count}} seleccionados`,selectAll:`Seleccionar todo`,tags:`Etiquetas`,project:`Proyecto`,favorite:`Favorito`,delete:`Eliminar`,toggledFavorites:`Se cambió el estado de favorito de {{count}} archivo(s)`,failedUpdateFavorites:`Error al actualizar los favoritos`,archivesDeleted:`{{count}} archivo(s) eliminado(s)`,failedDeleteArchives:`Error al eliminar los archivos`,photoDeleted:`Foto eliminada`,failedDeletePhoto:`Error al eliminar la foto`},list:{name:`Nombre`,printer:`Impresora`,date:`Fecha`,size:`Tamaño`,actions:`Acciones`,hasTimelapse:`Tiene time-lapse`},log:{date:`Fecha`,printName:`Nombre de la impresión`,printer:`Impresora`,user:`Usuario`,status:`Estado`,duration:`Duración`,filament:`Filamento`,filamentUsed:`Filamento usado`,cost:`Coste`,energy:`Energía`,energyCost:`Coste de energía`,completedAt:`Finalizado`,columns:`Columnas`,sortBy:`Ordenar por {{column}}`,allPrinters:`Todas las impresoras`,allUsers:`Todos los usuarios`,allStatuses:`Todos los estados`,cancelled:`Cancelada`,skipped:`Omitida`,dateFrom:`Desde`,dateTo:`Hasta`,noEntries:`No se encontraron entradas en el registro de impresión`,showing:`Mostrando {{count}} de {{total}} entradas`,rowsPerPage:`Filas`,page:`Página`,prev:`Anterior`,next:`Siguiente`,clearLog:`Borrar registro`,clearLogTitle:`Borrar el registro de impresión`,clearLogConfirm:`Todas las entradas del registro de impresión se eliminarán permanentemente. Los archivos y los elementos de la cola no se ven afectados. Esta acción no se puede deshacer. ¿Está seguro?`,clearLogButton:`Borrar todo`,cleared:`{{count}} entradas del registro borradas`,clearFailed:`Error al borrar el registro de impresión`,deleteEntryTitle:`Eliminar entrada del registro de impresión`,deleteEntryConfirm:`Esta entrada se eliminará del registro y sus contribuciones de filamento, tiempo y costo desaparecerán de las estadísticas rápidas. El archivo correspondiente (si lo hay) no se ve afectado. Esta acción no se puede deshacer.`,entryDeleted:`Entrada del registro de impresión eliminada`,entryDeleteFailed:`Error al eliminar la entrada del registro de impresión`,editEntryTitle:`Editar entrada del registro de impresión`,editEntryDescription:`Clasifica esta impresión. El widget de Análisis de fallos agrupa por estos valores, por lo que las actualizaciones se reflejan en las estadísticas de inmediato.`,entryUpdated:`Entrada del registro actualizada`,entryUpdateFailed:`No se pudo actualizar la entrada del registro`,statuses:{completed:`Completada`,failed:`Fallida`,stopped:`Detenida`,cancelled:`Cancelada`,skipped:`Omitida`}}},dispatchToast:{untitled:`Trabajo de impresión`,startingPrints:`Iniciando impresiones`,progressSummary:`{{complete}}/{{total}} listas • Procesando: {{processing}}`,expandDetails:`Expandir detalles del despacho`,collapseDetails:`Contraer detalles del despacho`,awaitingPrinter:`Esperando a la impresora…`,status:{processing:`Procesando`,completed:`Completada`,failed:`Fallida`},failed:{generic:`Despacho fallido`,upload_failed:`Fallo al subir a la impresora`,start_command_failed:`La impresora rechazó el comando de inicio`},dismiss:`Cerrar`},pipelineRuns:{title:`Ejecuciones de pipeline`,loading:`Cargando…`,empty:`Aún no hay ejecuciones de pipeline.`,filter:{pipeline:`Pipeline`,status:`Estado`,target:`Destino`,all:`Todas`,allPipelines:`Todas las pipelines`,allStatus:`Todos los estados`,allTargets:`Todos los destinos`,clear:`Limpiar filtros`,noMatches:`Ninguna ejecución coincide con los filtros actuales.`},totalCount_one:`{{n}} ejecución`,totalCount_other:`{{n}} ejecuciones`,copies:`{{n}} copias`,failedCount:`{{n}} fallidas`,copyN:`Copia {{n}}`,retryFailed:`Reintentar fallidas`,retryOf:`reintento de #{{n}}`,pagination:`{{start}}–{{end}} de {{total}}`,toast:{cancelled:`Ejecución cancelada`,cancelFailed:`Cancelación fallida`,retryStarted:`Reintento iniciado`,retryFailed:`Reintento fallido`,cleared:`{{n}} ejecuciones eliminadas`,clearFailed:`Error al borrar`},clearLog:`Borrar historial`,clearConfirmTitle:`¿Borrar historial?`,clearConfirmBody:`¿Eliminar todas las ejecuciones de pipeline completadas, fallidas, canceladas y con fallos parciales? Las ejecuciones en curso se conservan. Esto no se puede deshacer.`,clearConfirmAction:`Borrar`,jobStatus:{pending:`pendiente`,awaiting_printer:`esperando impresora`,queued:`en cola`,printing:`imprimiendo`,completed:`completada`,failed:`fallida`,cancelled:`cancelada`},cancelledByUser:`Cancelado por el usuario`},queue:{filamentShort:{rowBadge:`Filamento insuficiente para la bobina asignada`,rowTooltip:`El planificador marco este elemento. Pulsa Reproducir para ver el deficit por slot y decidir si imprimir de todos modos.`,confirmTitle:`Filamento insuficiente`,confirmIntro:`La bobina asignada no puede cubrir al menos un slot. Imprimir de todos modos?`,lineItem:`Slot {{slot}}: necesita {{required}} g, quedan {{remaining}} g`,unknown:`desconocido`,printAnyway:`Imprimir de todos modos`},slicerAmsMapping:{rowBadge:`Ranuras AMS guardadas para esta impresora`,rowTooltip:`Este archivo conserva las ranuras AMS exactas que eligió el slicer, guardadas para la impresora de este elemento. Una reimpresión en ella puede reutilizar esas bobinas en lugar de volver a emparejar por tipo y color.`},title:`Cola de impresión`,subtitle:`Programe y gestione sus trabajos de impresión`,editQueueItem:`Editar elemento de la cola`,selectAllPlates:`Seleccionar las {{count}} camas`,deselectAll:`Deseleccionar todo`,printQueued:`Impresión encolada`,printQueuedWillStartWhenIdle:`Comenzará cuando la impresora esté inactiva`,itemsQueued:`{{count}} elementos encolados`,sending:`Enviando...`,sendingProgress:`Enviando {{current}}/{{total}}...`,adding:`Añadiendo...`,addingProgress:`Añadiendo {{current}}/{{total}}...`,savingProgress:`Guardando {{current}}/{{total}}...`,clearQueue:`Vaciar la cola`,clearHistory:`Borrar el historial`,emptyQueue:`La cola está vacía`,position:`Posición`,scheduledTime:`Hora programada`,moveUp:`Subir`,moveDown:`Bajar`,startNow:`Iniciar ahora`,printingInProgress:`Impresión en curso...`,viewArchive:`Ver archivo`,viewInFileManager:`Ver en el gestor de archivos`,itemCount:`{{count}} elemento`,itemCount_plural:`{{count}} elementos`,dragToReorder:`Arrastre para reordenar (solo elementos «lo antes posible»)`,reorderHint:`La posición solo afecta a los elementos «lo antes posible». Los elementos programados se ejecutan a su hora establecida.`,sjf:{label:`SJF`,tooltip:`Trabajo más corto primero — el planificador prioriza las impresiones más cortas`},addedBy:`Añadido por {{name}}`,nextInQueue:`Siguiente en la cola`,clearPlateSuccess:`Cama despejada — lista para la próxima impresión`,plateNumber:`Cama {{index}}`,quantity:`Cantidad`,quantityHint:`Crea {{count}} elementos en la cola`,plateQuantityLabel:`Impresiones de {{plate}}`,plateQuantityTotal_one:`{{count}} impresión en total`,plateQuantityTotal_other:`{{count}} impresiones en total`,batchOrders:{title:`Pedidos por lotes`,emptyTitle:`Sin pedidos por lotes`,emptyDescription:`Pon en cola un archivo de varias bandejas, o más de una copia de una bandeja, y el pedido aparecerá aquí con su progreso.`,filter:{active:`Activos`,completed:`Completados`,cancelled:`Cancelados`,all:`Todos`},status:{active:`Activo`,completed:`Completado`,cancelled:`Cancelado`},noTargets:`Solo agrupación`,noTargetsHint:`Creado antes de que existieran las cantidades por bandeja, así que sigue las impresiones en cola en lugar de un objetivo.`,dispatchRemaining:`Encolar {{count}} restantes`,dispatchPlate:`Encolar restantes`,strandedPlate:`No queda de dónde copiar los ajustes`,strandedNotice:`No se pueden encolar {{runs}} de las {{owed}} impresiones aún pendientes: esa cama ya no tiene ninguna impresión encolada o terminada de la que copiar los ajustes. Encola la cama una vez desde el archivo o cancela el pedido.`,dispatched:`Impresiones restantes encoladas para {{name}}`,plateProgress:`{{completed}} de {{target}} hechas`,remaining:`{{count}} pendientes`,failed:`{{count}} fallidas`,printing:`{{count}} imprimiendo`,wholeFile:`Archivo completo`,due:`Vence {{date}}`,costSoFar:`{{amount}} hasta ahora`,costRemaining:`({{amount}} por gastar)`},activeBatches:`Lotes activos`,batchProgress:`{{completed}} de {{total}} completados`,cancelBatch:`Cancelar los restantes`,batchCancelled:`Elementos restantes del lote cancelados`,cancelBatchConfirmTitle:`Cancelar lote`,cancelBatchConfirmMessage:`¿Cerrar este pedido? Las impresiones que sigan en la cola se cancelan y deja de reclamar lo que no ha producido.`,batch:{defaultName:`Lote`,label:`{{count}} elemento`,label_plural:`{{count}} elementos`,pendingCount:`{{count}} pendiente`,pendingCount_plural:`{{count}} pendientes`,expand:`Expandir lote`,collapse:`Contraer lote`,groupAsBatch:`Agrupar como lote…`,groupAsBatchDescription:`Combinar los {{count}} elementos seleccionados en un único lote contraíble.`,nameLabel:`Nombre del lote`,namePlaceholder:`p. ej., Regalos del viernes`,create:`Crear lote`,ungroup:`Desagrupar`,ungroupConfirmTitle:`¿Desagrupar lote?`,ungroupConfirmMessage:`Los elementos permanecerán en la cola pero ya no estarán agrupados.`,dragGroup:`Arrastrar grupo`},tabs:{batches:`Lotes`,queue:`Cola`,history:`Historial`,timeline:`Cronología`,pipelines:`Procesos`},layout:{flatList:`Lista`,byPrinter:`Por impresora`,groupByPrinter:`Agrupar por impresora`},history:{emptyTitle:`Sin historial todavía`,emptyDescription:`Las impresiones completadas, canceladas y fallidas aparecerán aquí.`,showMore:`Mostrar más`,showingCount:`Mostrando {{shown}} de {{total}}`},dragGhost:{multiCount:`{{count}} elementos`,batch:`{{name}} ({{count}} copia)`,batch_plural:`{{name}} ({{count}} copias)`},sections:{currentlyPrinting:`Imprimiendo actualmente`,queued:`En cola`,history:`Historial`},status:{pending:`Pendiente`,waiting:`En espera`,printing:`Imprimiendo`,paused:`En pausa`,completed:`Completada`,failed:`Fallida`,skipped:`Omitida`,cancelled:`Cancelada`},summary:{printing:`Imprimiendo`,queued:`En cola`,totalTime:`Tiempo total de la cola`,totalWeight:`Peso total de la cola`,history:`Historial`},filter:{allPrinters:`Todas las impresoras`,unassigned:`Sin asignar`,allStatus:`Todos los estados`,allLocations:`Todas las ubicaciones`,any:`Cualquiera`},sort:{byPosition:`Ordenar por posición`,byName:`Ordenar por nombre`,byPrinter:`Ordenar por impresora`,bySchedule:`Ordenar por programación`,byDate:`Ordenar por fecha`,ascendingOldest:`Ascendente (más antiguos primero)`,descendingNewest:`Descendente (más recientes primero)`},badges:{staged:`Preparado`,requiresPrevious:`Requiere éxito previo`,autoPowerOff:`Apagado automático`,gcodeInjection:`G-code`},empty:{title:`No hay impresiones programadas`,description:`Programe una impresión desde la página de Archivos con la opción «Programar» del menú contextual, o arrastre y suelte archivos para empezar.`},time:{etaIfStartedNow:`Hora de finalización si este trabajo comenzara ahora`,whenFree:`Cuando haya una impresora libre`,overdue:`Atrasada`,now:`Ahora`,lessThanMinute:`En menos de un minuto`,inMinutes:`En {{count}} min`,inHours:`En {{count}} horas`},actions:{startPrint:`Iniciar impresión`,stopPrint:`Detener impresión`,requeue:`Volver a encolar`},bulkEdit:{title:`Editar {{count}} elemento`,title_plural:`Editar {{count}} elementos`,description:`Solo se aplicarán los ajustes modificados a los elementos seleccionados.`,printer:`Impresora`,noChange:`— Sin cambios —`,queueOptions:`Opciones de la cola`,staged:`Preparado (inicio manual)`,autoPowerOff:`Apagado automático tras la impresión`,requirePrevious:`Requerir éxito previo`,gcodeInjection:`Inyectar G-code`,printOptions:`Opciones de impresión`,bedLevelling:`Nivelación de la cama`,flowCalibration:`Calibración del flujo`,vibrationCalibration:`Calibración de vibración`,layerInspection:`Inspección de la primera capa`,timelapse:`Time-lapse`,useAms:`Usar AMS`,nozzleOffsetCali:`Calibración del offset de boquillas`,applyChanges:`Aplicar cambios`,selectAll:`Seleccionar todo`,deselectAll:`Deseleccionar todo`,selected:`{{count}} seleccionados`,editSelected:`Editar seleccionados`,cancelSelected:`Cancelar seleccionados`},confirm:{cancelTitle:`Cancelar impresión programada`,cancelMessage:`¿Está seguro de que desea cancelar "{{name}}"?`,stopTitle:`Detener impresión`,stopMessage:`¿Está seguro de que desea detener la impresión actual "{{name}}"? Esto cancelará el trabajo de impresión en la impresora.`,removeTitle:`Quitar del historial`,removeMessage:`¿Está seguro de que desea quitar "{{name}}" del historial de la cola?`,clearHistoryTitle:`Borrar el historial`,clearHistoryMessage:`¿Está seguro de que desea quitar los {{count}} elemento(s) del historial?`,cancelButton:`Cancelar impresión`,stopButton:`Detener impresión`,thisPrint:`esta impresión`,thisItem:`este elemento`},toast:{cancelled:`Elemento de la cola cancelado`,cancelFailed:`Error al cancelar el elemento`,removed:`Elemento de la cola eliminado`,keptForOrder:`Cancelado en lugar de eliminado: es la única impresión desde la que el pedido puede volver a encolar esta cama`,historyKeptForOrders:`Se conservan {{kept}} que los pedidos todavía necesitan.`,removeFailed:`Error al eliminar el elemento`,stopped:`Impresión detenida`,stopFailed:`Error al detener la impresión`,released:`Impresión liberada a la cola`,startFailed:`Error al iniciar la impresión`,reorderFailed:`Error al reordenar la cola`,historyCleared:`Se borraron {{count}} elemento(s) del historial`,clearHistoryFailed:`Error al borrar el historial`,updateFailed:`Error al actualizar los elementos`,bulkCancelled:`Se cancelaron {{count}} elemento(s)`,bulkCancelFailed:`Error al cancelar los elementos`,batchCreated:`Lote "{{name}}" creado`,batchCreateFailed:`Error al crear el lote`,batchUngrouped:`{{count}} elemento(s) desagrupado(s)`,batchUngroupFailed:`Error al desagrupar el lote`,resumedAfterFailure:`Cola reanudada — {{restored}} trabajo(s) restaurado(s) a pendientes`,resumeAfterFailureFailed:`Error al reanudar la cola`},resumeAfterFailure:{banner:`{{printer}} está bloqueado por un fallo de impresión previo — {{count}} trabajo(s) omitido(s)`,bannerHint:`Soluciona el problema de la impresora y reanuda para restaurar los trabajos omitidos y limpiar el bloqueo.`,button:`Reanudar tras fallo`,confirmTitle:`¿Reanudar la cola tras el fallo?`,confirmMessage:`Restaurar {{count}} trabajo(s) omitido(s) en {{printer}} a pendientes y limpiar el bloqueo del trabajo anterior. Asegúrate de que la impresora esté lista antes de continuar.`},timeline:{listView:`Lista`,timelineView:`Cronología`,unassigned:`Sin asignar`,noData:`No hay impresiones programadas para este día`,nothingCommitted:`No hay programaciones comprometidas en esta ventana. Los elementos preparados, los elementos en espera y los trabajos ASAP en impresoras inactivas no se muestran — establece una hora programada o libera un elemento preparado para verlo aquí.`,allDoneBy:`Todas las impresiones estimadas para las {{time}}`,staged:`Preparado`,filterAll:`Mostrar todo`,filterPrinting:`Imprimiendo`,filterQueued:`En cola`,time:{anyMoment:`en cualquier momento`,minutesLeft:`{{minutes}} min restantes`,hoursLeft:`{{hours}} h restantes`,hoursMinutesLeft:`{{hours}} h {{minutes}} min restantes`},day:{previous:`Día anterior`,next:`Día siguiente`,today:`Hoy`},window:{back12h:`12 horas atrás`,forward12h:`12 horas adelante`,now:`Ahora`},printerColumnHeader:`Impresora`},permissions:{noStopPrint:`No tiene permiso para detener impresiones`,noStartPrint:`No tiene permiso para iniciar impresiones`,noEdit:`No tiene permiso para editar este elemento de la cola`,noCancel:`No tiene permiso para cancelar este elemento de la cola`,noRequeue:`No tiene permiso para volver a encolar elementos`,noRemove:`No tiene permiso para eliminar este elemento de la cola`,noClearHistory:`No tiene permiso para borrar todo el historial`,noEditItems:`No tiene permiso para editar elementos de la cola`,noCancelItems:`No tiene permiso para cancelar elementos de la cola`}},stats:{title:`Estadísticas`,subtitle:`Arrastre los widgets para reorganizarlos. Haga clic en el icono del ojo para ocultarlos.`,overview:`Resumen`,totalPrints:`Impresiones totales`,successRate:`Tasa de éxito`,totalPrintTime:`Tiempo total de impresión`,printTime:`Tiempo de impresión`,totalFilament:`Filamento total usado`,filamentUsed:`Filamento usado`,filamentCost:`Coste del filamento`,totalCost:`Coste total`,energyUsed:`Energía usada`,energyCost:`Coste de la energía`,energyWarmingUpTooltip:`El seguimiento de energía aún está recopilando instantáneas horarias. Los totales por rango de fechas serán precisos una vez que exista al menos una instantánea antes del rango seleccionado. Los valores iniciales pueden quedarse cortos.`,averagePrintTime:`Tiempo medio de impresión`,printsPerDay:`Impresiones por día`,byPrinter:`Por impresora`,printsByPrinter:`Impresiones por impresora`,byMaterial:`Por material`,byMonth:`Por mes`,last7Days:`Últimos 7 días`,last30Days:`Últimos 30 días`,last90Days:`Últimos 90 días`,allTime:`Todo el tiempo`,quickStats:`Estadísticas rápidas`,printActivity:`Actividad de impresión`,filamentTypes:`Tipos de filamento`,filamentTrends:`Tendencias del filamento`,failureAnalysis:`Análisis de fallos`,timeAccuracy:`Precisión temporal`,successful:`Con éxito:`,failed:`Fallidas:`,cancelled:`Canceladas:`,perfectEstimate:`100% = estimación perfecta`,noTimeAccuracyData:`Aún no hay datos de precisión temporal`,noFilamentData:`No hay datos de filamento disponibles`,noPrinterData:`No hay datos de impresora disponibles`,noPrintData:`No hay datos de impresión disponibles`,noPrintDataLast30Days:`No hay datos de impresión en los últimos 30 días`,failureReasons:`Motivos de fallo`,topFailureReasons:`Principales motivos de fallo`,failedPrintsCount:`{{failed}} / {{total}} impresiones fallidas`,lastWeekRate:`Semana pasada: {{rate}}%`,resetLayout:`Restablecer disposición`,recalculateCosts:`Recalcular costes`,recalculateCostsHint:`Recalcular todos los costes de archivo usando los precios actuales del filamento`,exportStats:`Exportar estadísticas`,exportAsCsv:`Exportar como CSV`,exportAsExcel:`Exportar como Excel`,hiddenCount:`{{count}} ocultos`,exportDownloaded:`Exportación descargada`,exportFailed:`Error en la exportación`,layoutReset:`Disposición restablecida`,recalculatedCosts:`Costes recalculados para {{count}} archivos`,recalculateFailed:`Error al recalcular los costes`,loadingStats:`Cargando estadísticas...`,noPermissionResetLayout:`No tiene permiso para restablecer la disposición`,noPermissionRecalculate:`No tiene permiso para recalcular los costes`,noPrintDataInRange:`No hay datos de impresión en el rango seleccionado`,periodFilament:`Filamento del periodo`,periodCost:`Coste del periodo`,avgPerPrint:`Promedio por impresión`,usageOverTime:`Uso a lo largo del tiempo`,energyOverTime:`Energía a lo largo del tiempo`,filamentByWeight:`Peso`,printDuration:`Duración de la impresión`,printerUtilization:`Uso de la impresora`,filamentSuccess:`Éxito por material`,printHabits:`Hábitos de impresión`,printTimeOfDay:`Hora del día de impresión`,colorDistribution:`Distribución de colores`,noColorData:`No hay datos de color disponibles`,records:`Récords`,longestPrint:`Impresión más larga`,heaviestPrint:`Impresión más pesada`,mostExpensivePrint:`Más cara`,busiestDay:`Día más activo`,successStreak:`Racha de éxitos`,streakPrint:`impresión consecutiva`,streakPrints:`{{count}} impresiones consecutivas`,printerStats:`Estadísticas de la impresora`,hours:`horas`,avgPrints:`Impresiones medias`,noArchiveData:`No hay datos de impresión disponibles`,filamentByTime:`Tiempo`,avgWeight:`Peso medio`,avgTime:`Tiempo medio`,filamentByPrints:`Impresiones`,timeframe:{today:`Hoy`,"this-week":`Esta semana`,"this-month":`Este mes`,"last-7":`Últimos 7 días`,"last-30":`Últimos 30 días`,"last-90":`Últimos 90 días`,"this-year":`Este año`,"all-time":`Todo el tiempo`,custom:`Rango personalizado`,from:`Desde`,to:`Hasta`},allUsers:`Todos los usuarios`,noUser:`Sin usuario (sistema)`,filterByUser:`Filtrar por usuario`},maintenance:{title:`Mantenimiento`,overview:`Resumen`,allOk:`Todo el mantenimiento al día`,dueCount:`{{count}} tarea pendiente`,dueCount_plural:`{{count}} tareas pendientes`,warningCount:`{{count}} advertencia`,warningCount_plural:`{{count}} advertencias`,totalPrintTime:`Tiempo total de impresión`,nextMaintenance:`Próximo mantenimiento`,nothingDue:`Nada pendiente`,tasks:`Tareas`,lastPerformed:`Realizado por última vez`,interval:`Intervalo`,hoursRemaining:`{{hours}} h restantes`,hoursOverdue:`{{hours}} h de retraso`,markDone:`Marcar como hecho`,performMaintenance:`Realizar mantenimiento`,history:`Historial`,noHistory:`No hay historial de mantenimiento`,editPrintHours:`Editar horas de impresión`,currentHours:`Horas actuales`,statusTab:`Estado`,settingsTab:`Ajustes`,overdueCount:`{{count}} atrasadas`,dueSoonCount:`{{count}} pronto pendientes`,dueSoon:`Pronto pendiente`,allGood:`Todo correcto`,overdueBy:`Atrasado {{duration}}`,dueIn:`Pendiente en {{duration}}`,timeLeft:`{{duration}} restante`,day:`1 día`,days:`{{count}} días`,week:`1 semana`,weeks:`{{count}} semanas`,month:`1 mes`,months:`{{count}} meses`,year:`1 año`,maintenanceTypes:`Tipos de mantenimiento`,maintenanceTypesDescription:`Tipos del sistema y sus tareas de mantenimiento personalizadas`,addCustomType:`Añadir tipo personalizado`,restoreDefaults:`Restaurar tareas predeterminadas`,intervalType:`Tipo de intervalo`,intervalValue:`Intervalo ({{type}})`,icon:`Icono`,documentationLink:`Enlace de documentación (opcional)`,assignToPrinters:`Asignar a impresoras`,selectAtLeastOnePrinter:`Seleccione al menos una impresora`,addType:`Añadir tipo`,custom:`Personalizado`,printHours:`Horas de impresión`,calendarDays:`Días naturales`,exampleName:`p. ej., Reemplazar filtro HEPA`,viewDocumentation:`Ver documentación`,timeBasedInterval:`Intervalo basado en el tiempo`,intervalOverrides:`Anulaciones de intervalo`,intervalOverridesDescription:`Personalizar intervalos para impresoras concretas`,assignedToPrinters:`Asignado a las impresoras:`,noPrintersAssigned:`No hay impresoras asignadas`,addPrinterShort:`Añadir:`,printersAssignedClick:`{{count}} impresora(s) asignada(s) - haga clic para gestionar`,removeFromPrinter:`Quitar de esta impresora`,types:{lubricateCarbonRods:`Lubricar varillas de carbono`,lubricateRails:`Lubricar guías lineales`,cleanNozzle:`Limpiar boquilla/fusor`,checkBelts:`Comprobar la tensión de las correas`,cleanBuildPlate:`Limpiar la cama de impresión`,checkExtruder:`Comprobar los engranajes del extrusor`,checkCooling:`Comprobar los ventiladores de refrigeración`,generalInspection:`Inspección general`,cleanCarbonRods:`Limpiar varillas de carbono`,lubricateSteelRods:`Lubricar varillas de acero`,cleanSteelRods:`Limpiar varillas de acero`,cleanLinearRails:`Limpiar guías lineales`,checkPtfeTube:`Comprobar el tubo de PTFE`,replaceHepaFilter:`Reemplazar filtro HEPA`,replaceCarbonFilter:`Reemplazar filtro de carbono`,lubricateLeftNozzleRail:`Lubricar la guía de la boquilla izquierda`},maintenanceComplete:`Mantenimiento marcado como completado`,typeUpdated:`Tipo de mantenimiento actualizado`,typeDeleted:`Tipo de mantenimiento eliminado`,defaultsRestored:`Se restauraron {{count}} tarea(s) predeterminada(s)`,printHoursUpdated:`Horas de impresión actualizadas`,printerAssigned:`Impresora asignada`,printerRemoved:`Impresora eliminada`,deleteTypeConfirm:`¿Eliminar "{{name}}"?`,deleteSystemTypeTitle:`¿Eliminar la tarea de mantenimiento predeterminada?`,deleteSystemTypeMessage:`¿Está seguro de que desea eliminar la tarea de mantenimiento predeterminada "{{name}}"?`,noPermissionUpdate:`No tiene permiso para actualizar elementos de mantenimiento`,noPermissionPerform:`No tiene permiso para realizar mantenimiento`,noPermissionEditTypes:`No tiene permiso para editar tipos de mantenimiento`,noPermissionDeleteTypes:`No tiene permiso para eliminar tipos de mantenimiento`,noPermissionEditHours:`No tiene permiso para editar las horas de impresión`,noPermissionRemovePrinter:`No tiene permiso para quitar asignaciones de impresoras`,noPermissionAssignPrinter:`No tiene permiso para asignar impresoras`,noPermissionEditIntervals:`No tiene permiso para editar intervalos`,configureSettings:`Configurar tipos e intervalos de mantenimiento`},settings:{sliceEngine:`Motor de laminado`,sliceEngineSidecar:`Sidecar del servidor`,sliceEngineSidecarHint:`El laminado se ejecuta en el servidor, en el contenedor sidecar del laminador.`,sliceEngineBrowser:`En el navegador`,sliceEngineBrowserHint:`El laminado se ejecuta en este dispositivo, sin servidor.`,title:`Ajustes`,general:`General`,tabs:{general:`General`,smartPlugs:`Enchufes inteligentes`,sensors:`Sensores`,notifications:`Notificaciones`,queue:`Flujo de trabajo`,queueDispatch:`Cola y Despacho`,queuePipelines:`Pipelines`,filament:`Filamento`,network:`Red`,apiKeys:`Claves API`,virtualPrinter:`Impresora virtual`,spoolbuddy:`SpoolBuddy`,failureDetection:`Detección de fallos`,users:`Autenticación`,backup:`Copia de seguridad`,emailAuth:`Autenticación por correo`,ldap:`LDAP`,twoFa:`Autenticación de dos factores`,oidc:`SSO / OIDC`,security:`Seguridad`},spoolbuddy:{infoTitle:`Dispositivos SpoolBuddy`,infoBody:`Los quioscos SpoolBuddy se registran automáticamente mediante una señal de latido. Anule el registro de un dispositivo aquí si ya no está en uso o si quedó un duplicado obsoleto tras el fallo de un demonio.`,duplicatesTitle:`{{count}} dispositivos registrados`,duplicatesBody:`La interfaz del quiosco solo usa el primer dispositivo registrado. Si uno de estos es un duplicado obsoleto de un fallo, anule su registro — un dispositivo en línea se volverá a registrar en su próxima señal de latido.`,empty:`Aún no hay dispositivos SpoolBuddy registrados.`,online:`En línea`,offline:`Desconectado`,unregister:`Anular registro`,unregisterSuccess:`Registro del dispositivo anulado`,unregisterError:`Error al anular el registro del dispositivo`,confirmTitle:`¿Anular el registro del dispositivo SpoolBuddy?`,confirmBody:`Esto eliminará "{{hostname}}" ({{deviceId}}) de la base de datos. Si el dispositivo está en línea, se volverá a registrar en su próxima señal de latido.`,ipAddress:`Dirección IP`,firmware:`Firmware`,lastSeen:`Visto por última vez`,daemonUptime:`Tiempo de actividad del demonio`,systemUptime:`Tiempo de actividad del sistema`,never:`nunca`,nfc:`NFC`,scale:`Báscula`,cpuTemp:`Temp. de CPU`,cpuLoad:`Carga de CPU`,memory:`Memoria`,disk:`Disco`,update:`Actualizar`,updateConfirmTitle:`¿Actualizar el demonio de Spoolbuddy?`,updateConfirmBody:`¿Iniciar una actualización de software en "{{hostname}}"? El demonio se reiniciará una vez aplicada la actualización.`,restartBrowser:`Reiniciar navegador`,restartBrowserConfirmTitle:`¿Reiniciar el navegador del quiosco?`,restartBrowserConfirmBody:`¿Reiniciar el navegador del quiosco en "{{hostname}}"? La pantalla se quedará en negro brevemente.`,restartDaemon:`Reiniciar demonio`,restartDaemonConfirmTitle:`¿Reiniciar el demonio de Spoolbuddy?`,restartDaemonConfirmBody:`¿Reiniciar el demonio de Spoolbuddy en "{{hostname}}"? El dispositivo se desconectará durante unos segundos.`,reboot:`Reiniciar`,rebootConfirmTitle:`¿Reiniciar el dispositivo?`,rebootConfirmBody:`¿Reiniciar "{{hostname}}"? El dispositivo estará desconectado durante alrededor de un minuto.`,shutdown:`Apagar`,shutdownConfirmTitle:`¿Apagar el dispositivo?`,shutdownConfirmBody:`¿Apagar "{{hostname}}"? Necesitará acceso físico para volver a encenderlo.`,commandConfirm:`Confirmar`,commandQueued:`Comando encolado`,commandError:`Error al enviar el comando`},ldap:{title:`Autenticación LDAP`,enabledDesc:`La autenticación LDAP está activada`,disabledDesc:`La autenticación LDAP está desactivada`,disabledHint:`Configure y guarde los ajustes de LDAP a continuación y luego actívela.`,enabled:`Autenticación LDAP activada`,disabled:`Autenticación LDAP desactivada`,feature1:`Los usuarios pueden iniciar sesión con credenciales LDAP`,feature2:`La cuenta de administrador local permanece como alternativa`,feature3:`Los grupos LDAP se asignan a los grupos de Bambuddy al iniciar sesión`,serverConfig:`Configuración del servidor LDAP`,serverUrl:`URL del servidor`,serverUrlHint:`Use ldaps:// para SSL o ldap:// con StartTLS`,security:`Seguridad`,securityHint:`StartTLS actualiza una conexión sin cifrar a TLS. LDAPS usa TLS desde el principio.`,bindDn:`Bind DN (cuenta de servicio)`,bindPassword:`Contraseña de Bind`,searchBase:`DN base de búsqueda`,userFilter:`Filtro de búsqueda de usuarios`,userFilterHint:`{username} se sustituye por el nombre de usuario de inicio de sesión. Use (uid={username}) para OpenLDAP.`,advanced:`Avanzado`,autoProvision:`Aprovisionar usuarios automáticamente`,autoProvisionHint:`Crear automáticamente una cuenta de Bambuddy en el primer inicio de sesión LDAP`,defaultGroup:`Grupo predeterminado`,defaultGroupNone:`— Ninguno (sin alternativa) —`,defaultGroupHint:`Grupo alternativo asignado cuando un usuario LDAP se autentica pero no figura en ningún grupo LDAP asignado. Déjelo vacío para dejar a los usuarios sin asignar sin permisos.`,groupMapping:`Asignación de grupos (JSON)`,groupMappingHint:`Asignar los DN de grupos LDAP a los grupos de Bambuddy. Grupos disponibles: `,testConnection:`Probar conexión`,settingsSaved:`Ajustes de LDAP guardados`,errors:{serverRequired:`La URL del servidor LDAP es obligatoria`,searchBaseRequired:`El DN base de búsqueda es obligatorio`,enableAuthFirst:`Active primero la autenticación`,configureLdapFirst:`Guarde primero los ajustes de LDAP`}},email:{smtpSettings:`Configuración SMTP`,smtpHost:`Servidor SMTP`,smtpPort:`Puerto SMTP`,security:`Seguridad`,authentication:`Autenticación`,username:`Nombre de usuario`,password:`Contraseña`,fromEmail:`Correo del remitente`,fromName:`Nombre del remitente`,testConnection:`Probar conexión SMTP`,testRecipient:`Correo del destinatario de prueba`,sendTest:`Enviar correo de prueba`,sending:`Enviando...`,save:`Guardar ajustes`,saving:`Guardando...`,advancedAuth:`Autenticación avanzada`,advancedAuthEnabled:`La autenticación avanzada está activada`,advancedAuthEnabledDesc:`Las funciones de gestión de usuarios basadas en correo están activas. Los nuevos usuarios recibirán contraseñas autogeneradas por correo, y los usuarios podrán restablecer sus contraseñas mediante la función de contraseña olvidada.`,advancedAuthDisabled:`La autenticación avanzada está desactivada`,advancedAuthDisabledDesc:`Active la autenticación avanzada para habilitar las funciones basadas en correo para la gestión de usuarios.`,enable:`Activar`,disable:`Desactivar`,feature1:`Las contraseñas se autogeneran y se envían por correo a los nuevos usuarios`,feature2:`Los usuarios pueden iniciar sesión con el nombre de usuario o el correo`,feature3:`La función de contraseña olvidada está disponible`,feature4:`Los administradores pueden restablecer las contraseñas de los usuarios por correo`,errors:{requiredFields:`Rellene todos los campos obligatorios`,usernameRequired:`El nombre de usuario es obligatorio cuando la autenticación está activada`,enterTestEmail:`Introduzca una dirección de correo de prueba`,smtpServerAndEmail:`Rellene el servidor SMTP y el correo del remitente antes de probar`,usernamePasswordRequired:`El nombre de usuario y la contraseña son obligatorios cuando la autenticación está activada`,configureSmtpFirst:`Configure y pruebe primero los ajustes de SMTP`,enableAuthFirst:`Active primero la autenticación para usar las funciones basadas en correo.`},success:{settingsSaved:`Ajustes de SMTP guardados correctamente`},securityOptions:{starttls:`STARTTLS (puerto 587)`,ssl:`SSL/TLS (puerto 465)`,none:`Ninguna (puerto 25)`},authOptions:{enabled:`Activada`,disabled:`Desactivada`}},appearance:`Apariencia`,notifications:`Notificaciones`,smartPlugs:`Enchufes inteligentes`,spoolman:`Spoolman`,updates:`Actualizaciones`,language:`Idioma`,languageDescription:`Seleccione su idioma preferido`,theme:`Tema`,themeLight:`Claro`,themeDark:`Oscuro`,themeSystem:`Sistema`,defaultView:`Vista predeterminada`,defaultViewDescription:`Página que se muestra al abrir la aplicación`,checkForUpdates:`Buscar actualizaciones`,autoUpdate:`Actualización automática`,currentVersion:`Versión actual`,latestVersion:`Versión más reciente`,upToDate:`Está actualizado`,updateAvailable:`Actualización disponible`,notificationLanguage:`Idioma de las notificaciones`,notificationLanguageDescription:`Idioma de las notificaciones push`,bedCooledThreshold:`Umbral de cama enfriada`,bedCooledThresholdDescription:`Temperatura por debajo de la cual se considera que la cama se ha enfriado tras una impresión`,userNotificationsEnabled:`Notificaciones de usuario`,userNotificationsEnabledDescription:`Activa el menú de notificaciones de usuario y las notificaciones por correo de los eventos de los trabajos de impresión. Requiere autenticación avanzada.`,userNotificationsDisabledHint:`Active la autenticación avanzada para usar las notificaciones de usuario.`,notificationProviders:`Proveedores de notificaciones`,addProvider:`Añadir proveedor`,editProvider:`Editar proveedor`,providerType:`Tipo de proveedor`,testNotification:`Notificación de prueba`,testSuccess:`Notificación de prueba enviada correctamente`,testFailed:`Error al enviar la notificación de prueba`,quietHours:`Horas de silencio`,quietHoursDescription:`No molestar durante estas horas`,quietHoursStart:`Inicio`,quietHoursEnd:`Fin`,events:{title:`Eventos de notificación`,printStart:`Impresión iniciada`,printComplete:`Impresión completada`,printFailed:`Impresión fallida`,printStopped:`Impresión detenida`,printProgress:`Hitos de progreso`,printProgressDescription:`Notificar al 25%, 50% y 75%`,printerOffline:`Impresora desconectada`,printerError:`Error de la impresora`,filamentLow:`Filamento bajo`,maintenanceDue:`Mantenimiento pendiente`,maintenanceDueDescription:`Notificar cuando se necesite mantenimiento`},smartPlug:{title:`Enchufes inteligentes`,add:`Añadir enchufe inteligente`,edit:`Editar enchufe inteligente`,name:`Nombre`,ipAddress:`Dirección IP`,linkedPrinter:`Impresora vinculada`,autoOn:`Encendido automático`,autoOnDescription:`Encender cuando comienza la impresión`,autoOff:`Apagado automático`,autoOffDescription:`Apagar tras completar la impresión`,offDelay:`Retardo de apagado`,offDelayMinutes:`Minutos tras la impresión`,offDelayTemp:`Cuando la boquilla está por debajo de la temperatura`,currentState:`Estado actual`,turnOn:`Encender`,turnOff:`Apagar`},filamentTracking:`Seguimiento del filamento`,filamentTrackingDesc:`Elija cómo realizar el seguimiento de sus bobinas de filamento. Puede usar el inventario integrado o conectar un servidor Spoolman externo.`,autoAddUnknownRfid:`Añadir automáticamente bobinas RFID desconocidas`,autoAddUnknownRfidDesc:`Crea automáticamente una entrada de inventario cuando se detecta una bobina con una etiqueta RFID desconocida. Desactive si registra manualmente las nuevas bobinas con antelación para evitar duplicados.`,filamentChecks:`Comprobaciones de filamento`,disableFilamentWarnings:`Desactivar las advertencias de filamento`,disableFilamentWarningsDesc:`No mostrar advertencias sobre filamento insuficiente al imprimir o encolar`,preferLowestFilament:`Preferir el filamento con menos restante`,preferLowestFilamentDesc:`Cuando varias bobinas coincidan, usar la que tenga menos filamento restante`,preferLowestFilamentBackupNote:`Solo surte efecto cuando AMS Filament Backup está activado en la impresora — de lo contrario, la impresora no puede cambiar a una segunda bobina cuando la elegida se acabe.`,trackingModeBuiltIn:`Inventario integrado`,trackingModeBuiltInDesc:`Incluye coincidencia automática por RFID y seguimiento del uso`,trackingModeSpoolmanDesc:`Servidor externo de gestión de filamento`,builtInFeatureRfid:`Detecta automáticamente las bobinas RFID de Bambu Lab en el AMS`,builtInFeatureUsage:`Realiza el seguimiento del consumo de filamento por impresión`,builtInFeatureCatalog:`Gestione bobinas, colores y perfiles de factor K`,builtInFeatureThirdParty:`Las bobinas de terceros se pueden asignar a bobinas del inventario`,amsSyncButton:`Sincronizar pesos desde el AMS`,amsSyncTitle:`Sincronizar los pesos de las bobinas desde el AMS`,amsSyncMessage:`Esto sobrescribirá todos los pesos de las bobinas del inventario con los valores actuales de % restante del AMS de las impresoras conectadas. Use esto para recuperarse de datos de peso dañados. Las impresoras deben estar en línea.`,amsSyncing:`Sincronizando...`,amsSyncSuccess:`{{synced}} bobina(s) sincronizada(s), {{skipped}} omitida(s)`,amsSyncError:`Error al sincronizar los pesos desde el AMS`,spoolmanAmsSyncButton:`Sincronizar pesos de Spoolman desde el AMS`,spoolmanAmsSyncTitle:`Sincronizar los pesos de las bobinas de Spoolman desde el AMS`,spoolmanAmsSyncMessage:`Esto actualizará todos los pesos de las bobinas de Spoolman según los valores actuales de % restante del AMS de las impresoras conectadas. Las impresoras deben estar en línea.`,spoolmanAmsSyncing:`Sincronizando...`,spoolmanAmsSyncSuccess:`{{synced}} bobina(s) sincronizada(s), {{skipped}} omitida(s)`,spoolmanAmsSyncError:`Error al sincronizar los pesos de Spoolman desde el AMS`,spoolmanAmsSyncErrorUnreachable:`Error al sincronizar los pesos de Spoolman (Spoolman inaccesible)`,spoolmanAmsSyncErrorNotConfigured:`Error al sincronizar los pesos de Spoolman (Spoolman no configurado)`,spoolmanNotConfigured:`Spoolman no configurado`,spoolmanFilamentCatalogTitle:`Catálogo de filamentos de Spoolman`,spoolmanFilamentCatalogDesc:`Nombres de filamentos y pesos de tara de su instancia de Spoolman. El nombre y el peso de la bobina se pueden editar aquí; el resto de las propiedades se gestionan directamente en Spoolman.`,spoolmanUrl:`URL de Spoolman`,spoolmanUrlHint:`URL de su servidor Spoolman (p. ej., http://localhost:7912)`,spoolmanConnected:`Conectado`,spoolmanDisconnected:`Desconectado`,status:`Estado`,connect:`Conectar`,disconnect:`Desconectar`,howSyncWorks:`Cómo funciona la sincronización`,syncInfoRfidOnly:`Solo se sincronizan las bobinas oficiales de Bambu Lab con RFID`,syncInfoAutoCreate:`Las bobinas nuevas se crean automáticamente en Spoolman en la primera sincronización`,syncInfoThirdPartySkipped:`Las bobinas que no son de Bambu Lab (de terceros, rellenadas) se omiten`,linkingExistingSpools:`Vincular bobinas existentes`,linkingExistingSpoolsDesc:`Para vincular bobinas existentes de Spoolman a su AMS, pase el cursor sobre una ranura del AMS y haga clic en "Vincular a Spoolman".`,syncMode:`Modo de sincronización`,syncModeAuto:`Automática`,syncModeManual:`Solo manual`,syncModeAutoDesc:`Los datos del AMS se sincronizan automáticamente cuando se detectan cambios`,syncModeManualDesc:`Sincronizar solo cuando se active manualmente`,syncAmsData:`Sincronizar datos del AMS`,syncAmsDataDesc:`Sincronizar manualmente los datos del AMS de la impresora con Spoolman`,allPrinters:`Todas las impresoras`,noDefaultPrinter:`Sin predeterminada (preguntar cada vez)`,sidebarOrder:`Orden de la barra lateral`,saveThumbnails:`Guardar miniaturas`,captureFinishPhoto:`Capturar foto de finalización`,noPrintersConfigured:`No hay impresoras configuradas`,archiveMode:{always:`Crear siempre una entrada de archivo`,never:`No crear nunca una entrada de archivo`,ask:`Preguntar cada vez`},checkForUpdatesLabel:`Buscar actualizaciones`,checkPrinterFirmware:`Comprobar el firmware de la impresora`,includeBetaUpdates:`Incluir versiones beta`,includeBetaUpdatesDesc:`Notificar sobre versiones beta y preliminares al buscar actualizaciones`,localLogin:{disable:`Deshabilitar el inicio de sesión local con usuario/contraseña`,disableHint:`Cuando se habilita, solo los proveedores SSO pueden iniciar sesión. LDAP no se ve afectado. Defina BAMBUDDY_LOCAL_LOGIN=true en el servidor para mantener una vía de recuperación.`},enableRetry:`Activar reintentos`,homeAssistantDescription:`Controlar enchufes inteligentes mediante Home Assistant`,environmentManagedLabel:`(Gestionado por el entorno)`,autoEnabledViaEnv:`Activado automáticamente mediante variables de entorno`,urlFromEnvReadOnly:`Valor establecido por la variable de entorno HA_URL (solo lectura)`,tokenFromEnvReadOnly:`Valor establecido por la variable de entorno HA_TOKEN (solo lectura)`,mqttConnectedTo:`Conectado a`,prometheusDescription:`Exponer los datos de la impresora en formato Prometheus`,noSmartPlugsTitle:`No hay enchufes inteligentes configurados`,noSmartPlugsDescription:`Añada un enchufe inteligente basado en Tasmota para realizar el seguimiento del consumo de energía y automatizar el control de la alimentación.`,noProvidersTitle:`No hay proveedores configurados`,noProvidersDescription:`Añada un proveedor para recibir alertas.`,noTemplatesAvailable:`No hay plantillas disponibles. Reinicie el backend para cargar las plantillas predeterminadas.`,apiPermissionView:`Ver el estado de la impresora y la cola`,apiPermissionEdit:`Añadir y quitar elementos de la cola de impresión`,apiKeysEmptyTitle:`No hay claves API`,apiKeysEmptyDescription:`Cree una clave API para integrarse con servicios externos.`,noUsersFound:`No se encontraron usuarios`,noGroupsFound:`No se encontraron grupos`,noGroupsAvailable:`No hay grupos disponibles`,passwordsDoNotMatch:`Las contraseñas no coinciden`,systemGroupWarning:`Los nombres de los grupos del sistema no se pueden cambiar`,authDisabledTitle:`La autenticación está desactivada`,authDisabledFeature1:`Exigir inicio de sesión para acceder al sistema`,authDisabledFeature2:`Crear varios usuarios con permisos basados en grupos`,authDisabledFeature3:`Controlar el acceso con más de 50 permisos granulares`,userHasCreated:`Este usuario ha creado:`,userItemsQuestion:`¿Qué desea hacer con estos elementos?`,deleteUserConfirm:`¿Está seguro de que desea eliminar este usuario?`,actionCannotBeUndone:`Esta acción no se puede deshacer.`,addFirstSmartPlug:`Añada su primer enchufe inteligente`,providers:`Proveedores`,log:`Registro`,testAll:`Probar todo`,testResults:`Resultados de la prueba`,testPassedCount:`{{count}} superadas`,testFailedCount:`{{count}} fallidas`,messageTemplates:`Plantillas de mensajes`,messageTemplatesDescription:`Personalice los mensajes de notificación para cada evento.`,apiKeys:`Claves API`,apiKeysDescription:`Cree claves API para integraciones externas y webhooks.`,createKey:`Crear clave`,apiKeyCreated:`Clave API creada correctamente`,apiKeyCopyWarning:`¡Copie esta clave ahora; no se volverá a mostrar!`,useInApiBrowser:`Usar en el explorador de API`,apiKeyQrButton:`Código QR`,apiKeyQrTitle:`Escanea para configurar`,apiKeyQrCaption:`Escanea con tu app móvil para añadir este servidor y la clave API.`,apiKeyQrWarning:`Contiene tu clave API secreta: no la compartas ni hagas capturas donde otros puedan verla.`,createNewApiKey:`Crear nueva clave API`,keyName:`Nombre de la clave`,keyNamePlaceholder:`p. ej., Home Assistant, OctoPrint`,readStatus:`Leer estado`,readStatusDescription:`Ver el estado de la impresora, la cola, la biblioteca, los archivos de impresión y las pipelines del cortador`,manageQueue:`Gestionar la cola`,manageQueueDescription:`Añadir y quitar elementos de la cola de impresión. Junto con "Gestionar biblioteca", ejecutar pipelines del cortador`,controlPrinter:`Controlar la impresora`,controlPrinterDescription:`Pausar, reanudar y detener impresiones`,manageLibrary:`Gestionar biblioteca`,manageLibraryDescription:`Subir, renombrar, eliminar y cortar archivos de la biblioteca; importar modelos desde MakerWorld. Junto con "Gestionar la cola", ejecutar pipelines del cortador`,manageInventory:`Gestionar inventario`,manageInventoryDescription:`Crear, actualizar y eliminar bobinas y registros de inventario. Necesario para los quioscos SpoolBuddy (escaneo NFC, lecturas de balanza, comandos del sistema del quiosco).`,manageMaintenance:`Gestionar mantenimiento`,manageMaintenanceDescription:`Registrar mantenimientos completados, restablecer contadores, editar intervalos y gestionar el catálogo de tipos de mantenimiento. Ideal para automatizaciones de Home Assistant que registran "limpié la boquilla" sin conceder un control más amplio de la impresora.`,manageArchives:`Gestionar archivos de impresión`,manageArchivesDescription:`Editar y eliminar archivos de impresión, incluida la eliminación de impresiones antiguas y de su contribución a las estadísticas. Ideal para automatizaciones que depuran el historial de impresión.`,manageProjects:`Gestionar proyectos`,manageProjectsDescription:`Crear, actualizar y eliminar proyectos, y añadirles archivos de impresión. Ideal para automatizaciones que organizan las impresiones en proyectos.`,maintenanceBadge:`Mantenimiento`,archivesBadge:`Archivos`,projectsBadge:`Proyectos`,libraryBadge:`Biblioteca`,inventoryBadge:`Inventario`,cloudAccess:`Permitir el acceso a la nube`,cloudAccessDescription:`Leer los preajustes y filamentos de Bambu Cloud en su nombre. Requiere que haya iniciado sesión en Bambu Cloud.`,cloudBadge:`Nube`,updateEnergyCost:`Actualizar el precio de la electricidad`,updateEnergyCostDescription:`Permite que esta clave envíe por POST un nuevo precio de electricidad por kWh a /settings/electricity-price. Útil para las automatizaciones de tarifa dinámica de Home Assistant (Tibber, Octopus, etc.). Este es el único campo de ajustes que se puede escribir mediante una clave API.`,energyCostBadge:`Energía`,legacyKey:`Heredada`,legacyKeyTooltip:`Creada antes de la propiedad por usuario; vuelva a crearla para usar el acceso a la nube`,unnamedKey:`Clave sin nombre`,lastUsed:`Usada por última vez`,read:`Lectura`,control:`Control`,createFirstKey:`Cree su primera clave`,webhookEndpoints:`Puntos de conexión de webhook`,webhookApiKeyHint:`Use su clave API en la cabecera X-API-Key.`,webhook:{getAllStatus:`Obtener el estado de todas las impresoras`,getSpecificStatus:`Obtener el estado de una impresora concreta`,addToQueue:`Añadir a la cola de impresión`,pausePrint:`Pausar impresión`,resumePrint:`Reanudar impresión`,stopPrint:`Detener impresión`},apiBrowser:`Explorador de API`,apiBrowserDescription:`Explore y pruebe todos los puntos de conexión de API disponibles.`,apiKeyForTesting:`Clave API para pruebas`,apiKeyPlaceholder:`Pegue aquí su clave API para probar los puntos de conexión autenticados...`,apiKeyHint:`Esta clave se enviará como cabecera X-API-Key en las solicitudes.`,deleteApiKeyTitle:`Eliminar clave API`,deleteApiKeyMessage:`¿Está seguro de que desea eliminar esta clave API? Cualquier integración que use esta clave dejará de funcionar.`,deleteKey:`Eliminar clave`,amsDisplayThresholds:`Umbrales de visualización del AMS`,amsThresholdsDescription:`Configure los umbrales de color para los indicadores de humedad y temperatura del AMS.`,humidity:`Humedad`,goodGreen:`Buena (verde)`,fairOrange:`Aceptable (naranja)`,aboveFairBad:`Por encima del umbral aceptable se muestra en rojo (mala)`,fairAlsoDryingThreshold:`Este umbral también se usa para activar el secado automático cuando está habilitado`,fairBelowDryingFloor:`El secado automático no puede alcanzar este valor: un AMS indica {{floor}} % o más mientras calienta, por lo que cada ciclo terminaría y se reiniciaría al instante. Súbelo por encima del {{floor}} % si usas el secado automático.`,temperature:`Temperatura`,goodBlue:`Buena (azul)`,aboveFairHot:`Por encima del umbral aceptable se muestra en rojo (caliente)`,tempAlarmThreshold:`Alarma por encima de`,tempAlarmSeparateFromBand:`Solo el umbral de alarma envía notificaciones: Bueno y Aceptable únicamente colorean la pantalla. Déjalo vacío para alarmar en el umbral aceptable, como antes.`,tempAlarmMustBePositive:`Un umbral de 0 o inferior se ignora: la alarma usa el umbral aceptable.`,historyRetention:`Retención del historial`,keepSensorHistory:`Conservar el historial del sensor durante`,historyRetentionDescription:`Los datos de humedad y temperatura más antiguos se eliminarán automáticamente`,defaultPrintOptions:`Opciones de impresión predeterminadas`,defaultPrintOptionsDescription:`Establezca valores predeterminados para las opciones de impresión al iniciar nuevas impresiones. Se pueden anular por impresión en el diálogo de impresión.`,defaultBedLevelling:`Nivelación de la cama`,defaultBedLevellingDesc:`Nivelar automáticamente la cama antes de imprimir`,defaultFlowCali:`Calibración del flujo`,defaultFlowCaliDesc:`Calibrar el flujo de extrusión`,defaultVibrationCali:`Calibración de vibración`,defaultVibrationCaliDesc:`Reducir los artefactos de resonancia`,defaultLayerInspect:`Inspección de la primera capa`,defaultLayerInspectDesc:`Inspección de la primera capa por IA`,defaultTimelapse:`Time-lapse`,defaultTimelapseDesc:`Grabar vídeo time-lapse`,defaultNozzleOffsetCali:`Calibración del offset de boquillas`,defaultNozzleOffsetCaliDesc:`Calibrar los desplazamientos entre boquillas`,tempFanPresetsTitle:`Predefinidos de temperatura y ventilador`,tempFanPresetsDescription:`Personalice los valores de selección rápida en las ventanas emergentes de temperatura y velocidad del ventilador de la tarjeta de impresora. El botón Apagar siempre se muestra.`,tempFanPresetsNozzle:`Temperatura de la boquilla`,tempFanPresetsBed:`Temperatura de la cama`,tempFanPresetsChamber:`Temperatura de la cámara`,tempFanPresetsFan:`Velocidad del ventilador`,tempFanPresetsReset:`Restablecer valores predeterminados`,concurrentUploadsTitle:`Subidas simultáneas`,concurrentUploadsDescription:`Cuántas impresoras pueden recibir archivos de la cola al mismo tiempo. Las impresoras reciben los archivos lentamente (una impresión grande puede tardar varios minutos) y cada una espera su turno, así que en una granja grande subir este valor evita que la última impresora de un lote tenga que esperar a que terminen todas las transferencias anteriores. Bájalo si tu red o el host de Bambuddy tienen problemas con transferencias en paralelo.`,concurrentUploadsLabel:`Impresoras atendidas a la vez`,concurrentUploadsHelp:`1 envía a una impresora cada vez (el comportamiento anterior). El valor predeterminado es 4.`,staggeredStart:`Inicio escalonado`,staggeredStartDescription:`Tamaño de grupo e intervalo predeterminados al escalonar los inicios de lotes en varias impresoras. Se pueden anular por lote en la ventana de impresión.`,preheatTitle:`Precalentamiento y Heat Soak`,preheatDescription:`Calienta la cama (y la cámara, si es compatible) y mantiene la temperatura antes de iniciar cada impresión en cola. Útil para filamentos técnicos (PA, ABS) en impresoras sin calentador activo de cámara — la cama calienta la cámara por radiación mientras corre el temporizador de soak. La temperatura objetivo de la cama se lee del archivo de impresión; el comportamiento de la cámara depende del modelo de impresora.`,preheatEnabled:`Activar precalentamiento y soak`,preheatEnabledDesc:`Si está desactivado, las impresiones en cola se inician de inmediato. Cada elemento puede anular por impresión.`,preheatFilamentTargetsLabel:`Objetivo de cámara por filamento (°C)`,preheatFilamentTargetsHint:`Bambuddy elige el objetivo más alto entre los slots AMS cargados. Una impresión cuyos slots derivan todos 0 (PLA, PETG, TPU, PVA) omite el precalentamiento por completo y empieza de inmediato.`,preheatFilamentTargetsReset:`Restablecer valores predeterminados`,preheatFilamentTargetsDefaultRow:`Otros / sin asignar`,preheatMaxWait:`Espera máx. (segundos)`,preheatMaxWaitHelp:`Tope de la fase de calentamiento de cámara antes de pasar al soak.`,preheatSoak:`Soak (segundos)`,preheatSoakHelp:`Tiempo de retención tras alcanzar el objetivo o caducar la espera máx.`,preheatHardwareTitle:`Comportamiento por impresora:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E calientan activamente la cámara vía M141. X1C/P2S leen la temperatura pero solo calientan la cámara por radiación de la cama. P1S/P1P/A1/A1 Mini no tienen sensor de cámara — solo aplica el temporizador de soak.`,preheatPerItemDesc:`Calienta la cama y la cámara antes de iniciar esta impresión. Por defecto usa el interruptor global de Ajustes → Workflow.`,preheatOverride_inherit:`Heredar`,preheatOverride_on:`Activado`,preheatOverride_off:`Desactivado`,calibrationMode_off:`Desactivado`,calibrationMode_on:`Activado`,calibrationMode_auto:`Automático`,preheatTargetOverride:`Sobrescribir objetivo de cámara (°C, vacío = por filamento)`,preheatTargetOverrideHelp:`0 calienta la cama y ejecuta el reposo sin cámara. Si se deja en blanco, una impresión sin necesidad de cámara omite el precalentamiento por completo.`,plateClear:`Confirmación de cama despejada`,requirePlateClear:`Requerir confirmación de cama despejada`,requirePlateClearDescription:`Cuando está activado, el planificador espera la confirmación de cama despejada por impresora antes de iniciar impresiones en cola en impresoras con trabajos finalizados. Desactivar esto también oculta la insignia de estado de la cama y el botón "Marcar cama como despejada" en las tarjetas de impresora.`,keepBedWarm:`Mantener la cama caliente entre impresiones`,keepBedWarmDesc:`Mientras se espera la confirmación de limpieza de placa, mantiene la cama a la temperatura de mantenimiento indicada abajo para que la cámara siga caliente — o a la temperatura de cama de la siguiente impresión si es mayor. Solo aplica cuando la siguiente impresión requiere calefacción de cámara (ASA, ABS, PA, PC, etc.). Requiere la confirmación de limpieza de placa activada.`,keepWarmBedTemp:`Temperatura de la cama en mantenimiento (°C)`,keepWarmBedTempHelp:`Se usa siempre que la cama sirve para calentar la cámara: durante el mantenimiento en caliente y en el precalentado cuando el archivo no incluye temperatura de cama. Una temperatura mayor del archivo siempre tiene prioridad.`,keepWarmMaxMinutes:`Dejar de mantener caliente tras (minutos)`,keepWarmMaxMinutesHelp:`Si la placa no se limpia dentro de este tiempo, los calentadores se apagan en lugar de mantenerse encendidos indefinidamente.`,gcodeInjection:`Inyección de G-code`,gcodeInjectionDescription:`Configure G-code personalizado para inyectar al inicio o al final de las impresiones para sistemas de impresión automática como Farmloop, SwapMod, AutoClear y Printflow 3D. Los fragmentos se configuran por modelo de impresora y se aplican cuando se activa "Inyectar G-code" en un elemento de la cola.`,gcodeInjectionNoPrinters:`No se encontraron impresoras. Añada impresoras para configurar fragmentos de G-code.`,gcodeStartLabel:`G-code de inicio`,gcodeEndLabel:`G-code de fin`,gcodeStartPlaceholder:`G-code añadido antes de que comience la impresión...`,gcodeEndPlaceholder:`G-code añadido después de que termine la impresión...`,staggerGroupSize:`Tamaño de grupo`,staggerGroupSizeHelp:`Impresoras que se inician simultáneamente por grupo`,staggerInterval:`Intervalo (minutos)`,staggerIntervalHelp:`Retardo entre el inicio de cada grupo`,queueDrying:`Secado automático de la cola`,queueDryingDescription:`Secar automáticamente el filamento del AMS cuando la impresora está inactiva entre impresiones en cola. Usa el umbral de humedad de arriba para activar el secado.`,queueDryingEnabled:`Activar el secado automático`,queueDryingEnabledDescription:`Iniciar el secado del AMS automáticamente cuando la impresora está inactiva y la humedad supera el umbral`,queueDryingBlock:`Esperar a que termine el secado`,queueDryingBlockDescription:`Bloquear la cola de impresión hasta que termine el secado. Cuando está desactivado, las impresiones tienen prioridad sobre el secado.`,ambientDryingEnabled:`Secado ambiental`,ambientDryingEnabledDescription:`Secar automáticamente el filamento en impresoras inactivas cuando la humedad supera el umbral, incluso sin impresiones en cola.`,printDryingEnabled:`Continuar secado durante la impresión`,printDryingEnabledDescription:`Permite que el secado automático siga funcionando durante una impresión en hardware compatible (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L con firmware reciente). La temperatura de secado se limita automáticamente 5°C por debajo del preajuste en reposo para proteger las bobinas.`,dryingPresets:`Preajustes de secado`,dryingPresetsDescription:`Temperatura y duración por tipo de filamento. El AMS 2 Pro usa temperaturas más bajas; el AMS-HT admite temperaturas más altas.`,dryingFilament:`Filamento`,humidityThresholds:`Umbrales de humedad`,humidityThresholdsDescription:`Disparador de humedad por tipo de filamento para autosecado y alarmas. Cargas mixtas en un AMS usan el umbral más bajo.`,humidityThresholdCol:`Umbral`,humidityThresholdDefault:`Predeterminado (tipos desconocidos)`,printModal:`Ventana de impresión`,expandCustomMapping:`Expandir el mapeo personalizado de forma predeterminada`,expandCustomMappingDescription:`Al imprimir en varias impresoras, mostrar el mapeo de AMS por impresora expandido`,authentication:`Autenticación`,authEnabledDescription:`Su instancia está protegida con autenticación de usuario`,authDisabledDescription:`Active para exigir el inicio de sesión y gestionar el acceso de los usuarios`,authDisabledMessage:`Active la autenticación para crear cuentas de usuario, gestionar permisos y proteger su instancia de Bambuddy.`,enableAuthentication:`Activar la autenticación`,currentUser:`Usuario actual`,changePassword:`Cambiar contraseña`,admin:`Administrador`,users:`Usuarios`,addUser:`Añadir usuario`,groups:`Grupos`,addGroup:`Añadir grupo`,system:`Sistema`,noDescription:`Sin descripción`,userCount:`{{count}} usuarios`,permissionCount:`{{count}} permisos`,createUser:`Crear usuario`,username:`Nombre de usuario`,enterUsername:`Introduzca el nombre de usuario`,password:`Contraseña`,enterPassword:`Introduzca la contraseña`,passwordRequirements:`Al menos 8 caracteres, con una mayúscula, una minúscula, un dígito y un carácter especial.`,confirmPassword:`Confirmar contraseña`,confirmPasswordPlaceholder:`Confirme la contraseña`,viewReleaseOnGitHub:`Ver la versión en GitHub`,turnAllPlugsOn:`Encender todos los enchufes`,turnAllPlugsOff:`Apagar todos los enchufes`,clearNotificationLogs:`Borrar los registros de notificaciones`,clearLogsMessage:`Esto eliminará permanentemente todos los registros de notificaciones de más de 30 días. Esta acción no se puede deshacer.`,clearLogs:`Borrar registros`,resetUiPreferences:`Restablecer las preferencias de la interfaz`,resetUiPreferencesMessage:`Esto restablecerá todas las preferencias de la interfaz a sus valores predeterminados: orden de la barra lateral, tema, disposición del panel, modos de vista y preferencias de ordenación. Sus impresoras, archivos y ajustes del servidor NO se verán afectados. La página se recargará tras el restablecimiento.`,resetPreferences:`Restablecer preferencias`,deleteGroupTitle:`Eliminar grupo`,deleteGroupMessage:`¿Está seguro de que desea eliminar este grupo? Los usuarios de este grupo perderán estos permisos.`,deleteGroup:`Eliminar grupo`,disableAuthenticationTitle:`Desactivar la autenticación`,disableAuthenticationMessage:`¿Está seguro de que desea desactivar la autenticación? Esto hará que su instancia de Bambuddy sea accesible sin iniciar sesión. Todos los usuarios permanecerán en la base de datos, pero la autenticación se desactivará.`,disableAuthentication:`Desactivar la autenticación`,configureBambuddy:`Configurar Bambuddy`,systemDefault:`Predeterminado del sistema`,archiveSettings:`Ajustes de archivado`,newWindow:`Ventana nueva`,embeddedOverlay:`Superposición integrada`,preferredSlicer:`Laminador preferido`,preferredSlicerDescription:`Laminador usado para el corte en la aplicación a través del sidecar de la API`,openInSlicerLabel:`Abrir en el laminador`,openInSlicerInherit:`Igual que el laminador de la API`,openInSlicerDescription:`Laminador de escritorio que usa el botón «Abrir en el laminador». Déjelo en «Igual que el laminador de la API» para heredar, o elija un laminador distinto para uso local.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev tienen errores conocidos de la CLI que impiden laminar muchos 3MF creados con Bambu — consulte las incidencias del proyecto original #12426 (cierre inesperado en archivos multiextrusor pintados) y #13386 (rechazo por validación estricta del rango de parámetros). Se recomienda Bambu Studio hasta que lleguen las correcciones.`,useSlicerApi:`Usar la API del laminador`,useSlicerApiDescription:`Cuando está activado, las acciones de «Laminar» abren la ventana del laminador integrada en la aplicación y llaman al contenedor auxiliar de la API del laminador. Cuando está desactivado (predeterminado), delegan en el laminador de escritorio mediante un esquema de URI.`,slicerCard:`Laminador`,orcaslicerApiUrl:`OrcaSlicer sidecar URL`,bambuStudioApiUrl:`Bambu Studio sidecar URL`,slicerStallTimeout:`Tiempo de espera por inactividad del laminador (minutos)`,slicerStallTimeoutDescription:`Abandona un laminado tras este tiempo sin progreso del sidecar. Los modelos pesados que siguen informando progreso nunca se interrumpen, por mucho que tarden. Los sidecars que no informan progreso usan este valor como limite de tiempo total.`,slicerApiUrlDescription:`URL del contenedor auxiliar de la API del laminador. Déjelo en blanco para usar los valores predeterminados de las variables de entorno SLICER_API_URL / BAMBU_STUDIO_API_URL.`,externalCameras:`Cámaras externas`,costTracking:`Seguimiento de costes`,billingEnabled:`Activar facturación`,billingEnabledDescription:`Cobrar las impresiones a los usuarios y activar las funciones financieras`,printerKillSwitch:`Parada de impresiones no autorizadas`,printerKillSwitchDescription:`Detiene inmediatamente las impresiones que comiencen sin autorización.`,financeBudgetReset:`Reinicio mensual del presupuesto financiero`,financeBudgetResetDay:`Día de reinicio`,financeBudgetResetDayHelp:`En los meses cortos, se usa el último día del mes.`,financeBudgetResetTimezone:`Zona horaria del reinicio`,financeBudgetResetTimezoneHelp:`El inicio del período presupuestario se calcula en esta zona horaria.`,rebuildLedger:`Reconstruir libro mayor del monedero`,rebuildLedgerStarted:`Se inició la reconstrucción del libro mayor`,rebuildLedgerConfirmTitle:`¿Reconstruir el libro mayor del monedero?`,rebuildLedgerConfirmMessage:`Esto reconstruirá el libro mayor para reparar saldos históricos. Ejecútalo solo si sabes lo que estás haciendo.`,rebuildLedgerInProgress:`Iniciando reconstrucción...`,printsOnly:`Solo impresiones`,totalConsumption:`Consumo total`,dataManagement:`Gestión de datos`,storageUsage:`Uso del almacenamiento`,storageUsageDescription:`Desglose del uso de datos por categoría`,storageUsageTotal:`Total`,storageUsageErrors:`Errores`,storageUsageOtherBreakdown:`Otros (incluye recursos estáticos, scripts y archivos de configuración)`,storageUsageSystem:`Sistema`,storageUsageData:`Datos`,storageUsageUnavailable:`Información de uso del almacenamiento no disponible`,clearNotificationLogsDescription:`Eliminar los registros de notificaciones de más de 30 días`,resetUiPreferencesDescription:`Restablecer el orden de la barra lateral, el tema, los modos de vista y las preferencias de disposición. Las impresoras, los archivos y los ajustes no se ven afectados.`,enableHomeAssistant:`Activar Home Assistant`,enableMqtt:`Activar MQTT`,useTls:`Usar TLS`,enableMetricsEndpoint:`Activar el punto de conexión de métricas`,availableMetrics:`Métricas disponibles`,editUser:`Editar usuario`,deleteUserTitle:`Eliminar usuario`,groupName:`Nombre del grupo`,leaveEmptyForAnonymous:`Dejar vacío para anónimo`,leaveEmptyForNoAuth:`Dejar vacío para sin autenticación`,enterNewPassword:`Introduzca la nueva contraseña`,confirmNewPassword:`Confirme la nueva contraseña`,enterGroupName:`Introduzca el nombre del grupo`,enterDescriptionOptional:`Introduzca una descripción (opcional)`,enterCurrentPassword:`Introduzca la contraseña actual`,enterNewPasswordMin6:`Introduzca la nueva contraseña (mín. 6 caracteres)`,toast:{keyCopied:`Clave copiada al portapapeles`,copyFailed:`Error al copiar la clave`,keyAddedToBrowser:`Clave añadida al explorador de API`,clearLogsFailed:`Error al borrar los registros`,uiPreferencesReset:`Preferencias de la interfaz restablecidas. Actualizando...`,authDisabled:`Autenticación desactivada correctamente`,authDisableFailed:`Error al desactivar la autenticación`,apiKeyCreated:`Clave API creada`,apiKeyDeleted:`Clave API eliminada`,userCreated:`Usuario creado correctamente`,userUpdated:`Usuario actualizado correctamente`,userDeleted:`Usuario eliminado correctamente`,groupCreated:`Grupo creado correctamente`,groupUpdated:`Grupo actualizado correctamente`,groupDeleted:`Grupo eliminado correctamente`,fillRequiredFields:`Rellene todos los campos obligatorios`,passwordsDoNotMatch:`Las contraseñas no coinciden`,passwordTooShort:`La contraseña debe tener al menos 8 caracteres`,passwordNeedsUppercase:`La contraseña debe contener al menos una letra mayúscula`,passwordNeedsLowercase:`La contraseña debe contener al menos una letra minúscula`,passwordNeedsDigit:`La contraseña debe contener al menos un dígito`,passwordNeedsSpecial:`La contraseña debe contener al menos un carácter especial`,enterGroupName:`Introduzca un nombre de grupo`,settingsSaved:`Ajustes guardados`,noPermissionUpdate:`No tiene permiso para cambiar los ajustes`,cameraSettingsSaved:`Ajustes de la cámara guardados`,enterCameraUrl:`Introduzca una URL de cámara`,passwordChanged:`Contraseña cambiada correctamente`,connectionFailed:`Error de conexión`,testFailed:`La prueba falló`,cameraConnected:`Cámara conectada{{resolution}}`,cameraConnectedCoalesced:`Cámara conectada{{resolution}} (compartida con una captura ya en curso)`},testConnection:`Probar conexión`,catalog:{spoolCatalog:`Catálogo de bobinas`,spoolCatalogDescription:`Pesos de bobinas vacías por marca/tipo. Se usa para la búsqueda automática de peso al añadir bobinas.`,searchCatalog:`Buscar en el catálogo...`,addNewEntry:`Añadir nueva entrada`,namePlaceholder:`Nombre (p. ej., Bambu Lab - Plástico)`,weight:`Peso`,type:`Tipo`,default:`Predeterminado`,custom:`Personalizado`,noMatch:`Ninguna entrada coincide con su búsqueda`,empty:`No hay entradas en el catálogo`,deleteEntry:`Eliminar entrada`,deleteConfirm:`¿Está seguro de que desea eliminar "{{name}}"?`,resetCatalog:`Restablecer catálogo`,resetConfirm:`¿Restablecer el catálogo a los valores predeterminados? Esto eliminará todas las entradas personalizadas.`,loadFailed:`Error al cargar el catálogo de bobinas`,nameWeightRequired:`El nombre y el peso son obligatorios`,entryAdded:`Entrada añadida`,addFailed:`Error al añadir la entrada`,entryUpdated:`Entrada actualizada`,updateFailed:`Error al actualizar la entrada`,entryDeleted:`Entrada eliminada`,deleteFailed:`Error al eliminar la entrada`,resetSuccess:`Catálogo restablecido a los valores predeterminados`,resetFailed:`Error al restablecer el catálogo`,exported:`Se exportaron {{count}} entradas`,imported:`Se importaron {{added}} entradas ({{skipped}} omitidas)`,importFailed:`Error al importar: formato JSON no válido`,exportTooltip:`Exportar el catálogo a JSON`,importTooltip:`Importar el catálogo desde JSON`,resetTooltip:`Restablecer a los valores predeterminados`,selectedCount:`{{count}} seleccionadas`,deleteSelected:`Eliminar seleccionadas`,bulkDeleteConfirm:`¿Está seguro de que desea eliminar {{count}} entradas?`,bulkDeleted:`Se eliminaron {{count}} entradas`,bulkDeleteFailed:`Error al eliminar las entradas`,material:`Material`,spoolWeight:`Peso de la bobina`,color:`Color`,updateSpoolWeight:`Actualizar el peso de la bobina`,filamentUpdated:`Filamento actualizado`,filamentUpdateFailed:`Error al actualizar el filamento`,filamentUpdateInvalid:`Datos de filamento no válidos`,keepExistingSpoolWeight:`Conservar el peso anterior para las bobinas existentes`,keepExistingSpoolWeightDesc:`Las bobinas ya creadas con este tipo de filamento conservan el peso de tara anterior. Las bobinas nuevas usan el valor actualizado.`,applyToAllSpools:`Aplicar a todas las bobinas`,applyToAllSpoolsDesc:`Todos los cálculos de peso para este tipo de filamento usan inmediatamente el nuevo peso de tara.`},colorCatalog:{title:`Catálogo de colores`,description:`Colores de filamento por fabricante/material. Se usa para la búsqueda automática de color al añadir bobinas.`,searchColors:`Buscar colores...`,allManufacturers:`Todos los fabricantes`,addNewColor:`Añadir nuevo color`,manufacturer:`Fabricante`,colorName:`Nombre del color`,hex:`Hex`,materialOptional:`Material (opcional)`,showing:`Mostrando {{filtered}} de {{total}} colores`,noMatch:`Ningún color coincide con su búsqueda`,empty:`No hay colores en el catálogo`,deleteColor:`Eliminar color`,deleteConfirm:`¿Está seguro de que desea eliminar "{{name}}"?`,resetCatalog:`Restablecer el catálogo de colores`,resetConfirm:`¿Restablecer el catálogo a los valores predeterminados? Esto eliminará todos los colores personalizados.`,sync:`Sincronizar`,starting:`Iniciando...`,syncTooltip:`Sincronizar desde FilamentColors.xyz (más de 2000 colores, puede tardar un minuto)`,loadFailed:`Error al cargar el catálogo de colores`,fieldsRequired:`El fabricante, el nombre del color y el color hexadecimal son obligatorios`,colorAdded:`Color añadido`,addFailed:`Error al añadir el color`,colorUpdated:`Color actualizado`,updateFailed:`Error al actualizar el color`,colorDeleted:`Color eliminado`,deleteFailed:`Error al eliminar el color`,resetSuccess:`Catálogo de colores restablecido a los valores predeterminados`,resetFailed:`Error al restablecer el catálogo`,syncUpToDate:`Ya está actualizado ({{count}} colores comprobados)`,syncComplete:`Se añadieron {{added}} colores nuevos ({{skipped}} ya existían)`,syncError:`Error de sincronización`,syncFailed:`Error al sincronizar desde FilamentColors.xyz`,exported:`Se exportaron {{count}} colores`,imported:`Se importaron {{added}} colores ({{skipped}} omitidos)`,importFailed:`Error al importar: formato JSON no válido`,selectedCount:`{{count}} seleccionados`,deleteSelected:`Eliminar seleccionados`,bulkDeleteConfirm:`¿Está seguro de que desea eliminar {{count}} colores?`,bulkDeleted:`Se eliminaron {{count}} colores`,bulkDeleteFailed:`Error al eliminar los colores`},dateFormat:`Formato de fecha`,dateFormatUs:`EE. UU. (MM/DD/AAAA)`,dateFormatEu:`UE (DD/MM/AAAA)`,dateFormatIso:`ISO (AAAA-MM-DD)`,timeFormat:`Formato de hora`,timeFormat12:`12 horas (3:30 PM)`,timeFormat24:`24 horas (15:30)`,defaultPrinter:`Impresora predeterminada`,defaultPrinterDescription:`Preseleccione esta impresora para subidas, reimpresiones y otras operaciones.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Use Diseño de la barra lateral para reordenar elementos, restablecer la visibilidad y gestionar enlaces personalizados.`,setDefault:`Establecer como predeterminado`,sidebarOrderSetDefaultHint:`Establecer como predeterminado aplica el orden de menú actual a los usuarios que no han personalizado el suyo.`,sidebarDefaultSet:`Se ha establecido el orden de menú predeterminado.`,sidebarDefaultCleared:`Orden de menú predeterminado borrado.`,sidebarDefaultFailed:`Error al establecer el orden de menú predeterminado.`,reset:`Restablecer`,darkMode:`Modo oscuro`,lightMode:`Modo claro`,active:`(activo)`,background:`Fondo`,accent:`Acento`,style:`Estilo`,bgNeutral:`Neutro`,bgWarm:`Cálido`,bgCool:`Frío`,bgOled:`Negro OLED`,bgSlate:`Azul pizarra`,bgForest:`Verde bosque`,accentGreen:`Verde`,accentTeal:`Verde azulado`,accentBlue:`Azul`,accentOrange:`Naranja`,accentPurple:`Morado`,accentRed:`Rojo`,styleClassic:`Clásico`,styleGlow:`Resplandor`,styleVibrant:`Vibrante`,themeToggleHint:`Alterne entre modo oscuro, claro y sistema con el icono en la barra lateral.`,progressInTitle:`Progreso en la pestaña`,progressInTitleDescription:`Muestra el porcentaje de la impresión activa y un anillo de progreso en la pestaña del navegador.`,autoArchivePrints:`Archivar impresiones automáticamente`,autoArchiveDescription:`Guardar automáticamente los archivos 3MF cuando se completan las impresiones`,saveThumbnailsDescription:`Extraer y guardar imágenes de vista previa de los archivos 3MF`,captureFinishPhotoDescription:`Tomar una foto desde la cámara de la impresora cuando se completa la impresión. Bambuddy graba un breve timelapse durante la impresión para que la foto pueda obtenerse del momento previo al descenso de la cama; el archivo del timelapse se conserva si activaste el timelapse para esta impresión, de lo contrario se elimina automáticamente tras capturar la foto.`,finishPhotoRestorePlate:`Elevar la cama para la foto final`,finishPhotoRestorePlateDescription:`La impresora baja la cama unos 100 mm al terminar una impresión, dejando la pieza terminada por debajo del encuadre de la cámara. Bambuddy la vuelve a subir hasta justo encima de la última capa impresa, toma la foto y luego la baja de nuevo. Se omite si se desconoce la altura de la impresión o si hay otro trabajo en cola.`,ffmpegNotInstalled:`ffmpeg no instalado`,ffmpegRequired:`La captura de cámara requiere ffmpeg. Instálelo mediante <brew>brew install ffmpeg</brew> (macOS) o <apt>apt install ffmpeg</apt> (Linux).`,camera:`Cámara`,cameraViewMode:`Modo de vista de la cámara`,cameraOverlayDescription:`La cámara se abre en una superposición redimensionable en la pantalla principal`,cameraWindowDescription:`La cámara se abre en una ventana de navegador independiente`,externalCamerasDescription:`Configure cámaras externas para sustituir la cámara integrada de la impresora. Admite transmisiones MJPEG, RTSP, capturas HTTP y cámaras USB (V4L2). Cuando está activada, la cámara externa se usa para la vista en directo y las fotos de finalización.`,cameraPlaceholderUsb:`Ruta del dispositivo (/dev/video0)`,cameraPlaceholderUrl:`URL de la cámara (rtsp://... o http://...)`,cameraTypeMjpeg:`Transmisión MJPEG`,cameraTypeRtsp:`Transmisión RTSP`,cameraTypeSnapshot:`Captura HTTP`,cameraTypeUsb:`Cámara USB (V4L2)`,cameraSnapshotUrl:`URL de captura (opcional)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`URL de fotograma único usada para las miniaturas de notificaciones, las fotos de finalización, los fotogramas de time-lapse por capa y la detección de cama. El time-lapse y la detección de cama requieren cada uno su propio interruptor por impresora; esta URL es solo la fuente de imagen de la que se nutren cuando están activos. Déjelo en blanco para capturar desde la transmisión en directo de arriba. Útil para go2rtc (/api/frame.jpeg) y cámaras IP con un punto de conexión de captura dedicado.`,cameraRotation:`Rotación`,test:`Probar`,connected:`Conectada`,disconnected:`Desconectada`,currency:`Moneda`,defaultFilamentCost:`Coste predeterminado del filamento (por kg)`,electricityCost:`Coste de la electricidad por kWh`,energyDisplayMode:`Modo de visualización de la energía`,energyModePrintDescription:`El panel muestra la suma de la energía usada durante las impresiones`,energyModeTotalDescription:`El panel muestra la energía total de los enchufes inteligentes`,fileManager:`Gestor de archivos`,createArchiveEntry:`Crear una entrada de archivo al imprimir`,createArchiveEntryDescription:`Al imprimir desde el gestor de archivos, crear opcionalmente una entrada de archivo`,lowDiskSpaceWarning:`Advertencia de poco espacio en disco`,lowDiskSpaceDescription:`Mostrar una advertencia cuando el espacio libre en disco caiga por debajo de este umbral`,printerFirmware:`Firmware de la impresora`,checkFirmwareDescription:`Buscar actualizaciones de firmware de la impresora de Bambu Lab`,bambuddySoftware:`Software de Bambuddy`,autoCheckDescription:`Buscar automáticamente nuevas versiones al iniciar`,checkNow:`Buscar ahora`,updateAvailableVersion:`Actualización disponible: v{{version}}`,releaseNotes:`Notas de la versión`,updateViaDocker:`Actualizar mediante Docker Compose:`,composeDirectory:`Directorio de Compose`,composeDirectoryHint:`Directorio que contiene tu docker-compose.yml. Déjalo vacío para omitir el cd.`,copyUpdateCommand:`Copiar comando de actualización`,updateViaHomeAssistant:`Las actualizaciones las gestiona el Supervisor de Home Assistant. Abra Ajustes → Complementos → Bambuddy en Home Assistant para instalar la nueva versión.`,updateViaWindowsInstaller:`Las instalaciones en Windows se actualizan volviendo a ejecutar el instalador. Descarga la nueva versión abajo — tus datos, ajustes e impresoras se conservan.`,downloadWindowsInstaller:`Descargar instalador para v{{version}}`,installUpdate:`Instalar actualización`,latestVersionRunning:`Está ejecutando la versión más reciente`,failedToCheckUpdates:`Error al buscar actualizaciones: {{error}}`,backupRestore:`Copia de seguridad y restauración`,backupRestoreDescription:`Exportar/importar ajustes y configurar la copia de seguridad en GitHub`,goToBackup:`Ir a la copia de seguridad`,externalUrl:`URL externa`,externalUrlDescription:`La URL externa donde Bambuddy es accesible. Se usa para las imágenes de notificación y las integraciones externas.`,bambuddyUrl:`URL de Bambuddy`,externalUrlHint:`Incluya el protocolo y el puerto (p. ej., http://192.168.1.100:8000)`,ftpRetry:`Reintento de FTP`,ftpRetryDescription:`Reintentar las operaciones FTP cuando el Wi-Fi de la impresora no es fiable. Se aplica a las descargas de 3MF, las subidas de impresión, las descargas de time-lapse y las actualizaciones de firmware.`,autoRetryDescription:`Reintentar automáticamente las operaciones FTP fallidas`,retryAttempts:`Intentos de reintento`,retryDelay:`Retardo de reintento`,connectionTimeout:`Tiempo de espera de la conexión`,time_one:`{{count}} vez`,time_other:`{{count}} veces`,second_one:`{{count}} segundo`,second_other:`{{count}} segundos`,nSeconds:`{{count}} segundos`,increaseForWeakWifi:`Aumente para impresoras con Wi-Fi débil`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Conéctese a Home Assistant para controlar enchufes inteligentes mediante la API REST de HA. Admite las entidades switch, light, input_boolean y script.`,homeAssistantUrl:`URL de Home Assistant`,longLivedAccessToken:`Token de acceso de larga duración`,haTokenHint:`Cree un token en HA: Perfil → Tokens de acceso de larga duración → Crear token`,connectionSuccessful:`Conexión correcta`,connectionFailed:`Error de conexión`,haConnectionSuccess:`Conexión con Home Assistant realizada correctamente.`,haConnectionFailed:`Error al conectar con Home Assistant.`,mqttPublishing:`Publicación MQTT`,mqttDescription:`Publique los eventos de Bambuddy en un broker MQTT externo para la integración con Node-RED, Home Assistant y otros sistemas de automatización.`,mqttEnableDescription:`Publicar eventos en un broker MQTT externo`,brokerHostname:`Nombre de host del broker`,port:`Puerto`,usernameOptional:`Nombre de usuario (opcional)`,passwordOptional:`Contraseña (opcional)`,topicPrefix:`Prefijo del tema`,topicPrefixHint:`Los temas serán: {{prefix}}/printers/<serial>/status, etc.`,prometheusMetrics:`Métricas de Prometheus`,prometheusEndpointDescription:`Exponer las métricas de la impresora en <code>/api/v1/metrics</code> para la supervisión con Prometheus/Grafana.`,bearerTokenOptional:`Bearer Token (opcional)`,bearerTokenHint:`Si se establece, las solicitudes deben incluir <code>Authorization: Bearer <token></code>`,metricsConnectionStatus:`Estado de la conexión`,metricsPrinterState:`Estado de la impresora (inactiva/imprimiendo/etc.)`,metricsPrintProgress:`Progreso de la impresión 0-100%`,metricsBedTemp:`Temperatura de la cama`,metricsNozzleTemp:`Temperatura de la boquilla`,metricsPrintsTotal:`Total de impresiones por resultado`,metricsMore:`...y más (capas, ventiladores, cola, uso de filamento)`,smartPlugsDescription:`Conecte enchufes inteligentes (Tasmota o Home Assistant) para automatizar el control de la alimentación y realizar el seguimiento del consumo de energía de sus impresoras.`,allOn:`Encender todo`,allOff:`Apagar todo`,addSmartPlug:`Añadir enchufe inteligente`,energySummary:`Resumen de energía`,currentPower:`Potencia actual`,plugsOnline:`{{reachable}}/{{total}} enchufes en línea`,today:`Hoy`,yesterday:`Ayer`,total:`Total`,enablePlugsForSummary:`Active enchufes para ver el resumen de energía`,addNotificationProvider:`Añadir`,systemBadge:`(Sistema)`,creating:`Creando...`,changing:`Cambiando...`,deleteUserAndItems:`Eliminar el usuario Y sus elementos`,deleteUserKeepItems:`Eliminar el usuario, conservar los elementos (quedan sin propietario)`,ok:`Aceptar`,twoFa:{totpTitle:`Aplicación de autenticación (TOTP)`,totpDesc:`Use una aplicación de autenticación como Google Authenticator, Aegis o Authy.`,emailOtpTitle:`OTP por correo`,emailOtpDesc:`Enviar un código de un solo uso a {{email}} cuando inicie sesión.`,emailOtpNoEmail:`Añada una dirección de correo a su cuenta para habilitar este método.`,addEmailFirst:`Su cuenta no tiene dirección de correo. Pida a un administrador que añada una antes de activar el OTP por correo.`,setupTotp:`Configurar la aplicación de autenticación`,setupAuthApp:`Configurar la aplicación de autenticación`,setupInstructions:`Escanee el código QR de abajo con su aplicación de autenticación y luego confirme con un código.`,manualEntry:`¿No puede escanear? Introduzca este secreto manualmente:`,scannedContinue:`He escaneado el código — continuar`,enterCodeToConfirm:`Introduzca el código de 6 dígitos de su aplicación de autenticación para confirmar la configuración.`,activate:`Activar`,disableTotp:`Desactivar el autenticador`,disableConfirmHint:`Introduzca un código TOTP válido o un código de respaldo para desactivar el autenticador.`,totpDisabled:`Aplicación de autenticación desactivada.`,emailOtpEnabled:`OTP por correo activado.`,emailOtpDisabled:`OTP por correo desactivado.`,smtpRequired:`Configure y pruebe primero los ajustes de SMTP.`,invalidCode:`Código no válido. Inténtelo de nuevo.`,enableEmailOtp:`Activar el OTP por correo`,disableEmailOtp:`Desactivar el OTP por correo`,emailSetupEnterCode:`Se ha enviado un código de verificación a su dirección de correo. Introdúzcalo a continuación para confirmar que es el propietario de este buzón.`,verifyAndEnable:`Verificar y activar`,emailDisablePasswordHint:`Introduzca la contraseña de su cuenta para confirmar la desactivación del OTP por correo.`,passwordPlaceholder:`Introduzca su contraseña`,backupCodesTitle:`Guarde sus códigos de respaldo`,backupCodesWarning:`Guarde estos códigos en un lugar seguro. Cada código solo se puede usar una vez y no se volverán a mostrar.`,backupCodesRemaining:`Quedan {{count}} códigos de respaldo`,savedCodes:`He guardado mis códigos`,regenBackup:`Regenerar los códigos de respaldo`,regenBackupHint:`Introduzca su código TOTP actual para generar 10 códigos de respaldo nuevos. Todos los códigos de respaldo existentes quedarán invalidados.`,newBackupCodes:`Nuevos códigos de respaldo`,linkedAccounts:`Cuentas de SSO vinculadas`,linkedAccountsDesc:`Estos proveedores de identidad externos están vinculados a su cuenta.`,oidcUnlinked:`Cuenta desvinculada.`},sessionPolicy:{title:`Política de sesión`,description:`Duración máxima de sesión para nuevos inicios de sesión. Los tokens ya emitidos conservan su caducidad original.`,preset24h:`24 horas`,preset7d:`7 días`,preset30d:`30 días`,customHoursLabel:`Duración de sesión personalizada en horas`,hoursSuffix:`horas`,warning:`Las sesiones más largas reducen la protección de cierre automático. Recomendado solo para implementaciones de usuario único en entornos de confianza.`},oidc:{title:`Proveedores SSO / OIDC`,desc:`Configure proveedores de OpenID Connect para permitir el inicio de sesión único mediante proveedores de identidad externos.`,addProvider:`Añadir proveedor`,newProvider:`Nuevo proveedor`,empty:`Aún no hay proveedores OIDC configurados.`,created:`Proveedor creado.`,updated:`Proveedor actualizado.`,deleted:`Proveedor eliminado.`,refreshIcon:`Actualizar icono`,removeIcon:`Quitar icono`,iconRefreshed:`Icono actualizado.`,iconRemoved:`Icono eliminado.`,iconFetchFailed:`No se pudo obtener el icono de la URL del proveedor.`,deleteTitle:`Eliminar proveedor`,deleteMessage:`¿Eliminar "{{name}}"? Todas las cuentas de usuario vinculadas se desconectarán.`,form:{name:`Nombre visible`,issuerUrl:`URL del emisor`,clientId:`ID de cliente`,clientSecret:`Secreto de cliente`,scopes:`Ámbitos`,iconUrl:`URL del icono (opcional)`,enabled:`Activado`,autoCreate:`Crear usuarios automáticamente`,autoCreateDesc:`Crear automáticamente una cuenta local en el primer inicio de sesión.`,autoLink:`Vincular cuentas existentes automáticamente`,autoLinkDesc:`Vincular cuentas locales existentes haciendo coincidir el correo en el primer inicio de sesión.`,secretHint:`dejar en blanco para conservar el actual`,secretPlaceholder:`nuevo secreto`,emailClaim:`Claim de correo`,emailClaimDesc:`Claim de JWT usado como identidad de correo. Use «preferred_username» o «upn» para Azure Entra ID (que no envía email_verified). Use solo nombres de claim de confianza.`,emailClaimPlaceholder:`correo`,emailClaimCustomClaimAutoLinkWarning:`Los claims personalizados solo son seguros para la vinculación automática cuando el valor lo administra el inquilino (p. ej. upn / preferred_username de Azure Entra ID). No active la vinculación automática si su IdP permite a los usuarios autoasignarse este claim.`,requireEmailVerified:`Requerir correo verificado`,requireEmailVerifiedDesc:`Aceptar el claim de correo solo cuando el proveedor lo marca como verificado.`,requireEmailVerifiedWarning:`Advertencia: el correo se aceptará incluso sin verificación. Úselo solo con proveedores de confianza.`,requireEmailVerifiedAutoLink:`Desactive primero la vinculación automática para cambiar este ajuste.`,defaultGroup:`Grupo predeterminado`,defaultGroupDesc:`Grupo asignado a los usuarios creados automáticamente. Si no se establece, se usa Visores como alternativa.`,defaultGroupViewersFallback:`Visores (predeterminado)`,autologin:`Inicio automático`,autologinDesc:`Redirigir a los visitantes no autenticados directamente a este proveedor. Solo un proveedor puede llevar esta marca.`}},encryption:{title:`Estado del cifrado de MFA`,enabledFromEnv:`Cifrado en reposo activado (clave de la variable de entorno MFA_ENCRYPTION_KEY)`,enabledFromFile:`Cifrado en reposo activado (clave cargada del directorio de datos)`,enabledGenerated:`Cifrado en reposo activado con una clave autogenerada`,notConfigured:`Cifrado en reposo no configurado`,notConfiguredDesc:`Los secretos TOTP y los client_secrets de OIDC se almacenan en texto plano. Establezca MFA_ENCRYPTION_KEY o reinicie Bambuddy con un directorio de datos con permisos de escritura para generar una automáticamente.`,allEncrypted:`Todos los secretos de MFA están cifrados en reposo.`,legacyRowsLabel:`Filas heredadas en texto plano`,encryptedRowsLabel:`Filas cifradas`,legacyRowsWarning:`Se detectaron {{count}} fila(s) heredada(s) en texto plano. Vuelva a guardar el proveedor OIDC o vuelva a registrar la aplicación de autenticación del usuario para migrar al almacenamiento cifrado.`,backupHint:`La clave autogenerada se almacena en DATA_DIR/.mfa_encryption_key y se incluye en los ZIP de copia de seguridad local. Mantenga sus copias de seguridad seguras o establezca MFA_ENCRYPTION_KEY de forma explícita.`,decryptionBrokenTitle:`Falta la clave de cifrado`,decryptionBrokenError:`{{count}} registro(s) cifrado(s) no se pueden descifrar porque la clave de cifrado ya no está disponible. Restaure la MFA_ENCRYPTION_KEY anterior o DATA_DIR/.mfa_encryption_key para recuperarlos.`,migrationErrorWarning:`{{count}} fila(s) heredada(s) no se pudieron volver a cifrar al iniciar. Revise los registros del servidor y reinicie Bambuddy para reintentarlo.`},pipelineLimits:{title:`Límites de pipelines del cortador`,maxCopiesLabel:`Copias máximas por ejecución`,maxCopiesDesc:`Límite superior de copias que los operadores pueden solicitar al ejecutar una pipeline. El límite máximo del servidor es 1000.`},pipelines:{title:`Pipelines del Cortador`,subtitle:`Paquetes reutilizables de preajustes (impresora + proceso + filamentos + tipo de placa). Guarda uno desde el diálogo Cortar y aplícalo con un clic al siguiente archivo.`,loading:`Cargando pipelines…`,loadError:`No se pudieron cargar las pipelines.`,confirmDelete:`¿Eliminar esta pipeline? Esto no se puede deshacer.`,staleWarning:`Uno o más preajustes referenciados ya no existen. Vuelve a guardar esta pipeline desde el diálogo Cortar para corregirla.`,empty:{title:`Aún no hay pipelines.`,howto:`Abre el diálogo Cortar para cualquier archivo, elige impresora / proceso / filamentos / placa, y haz clic en "Guardar como pipeline". Tus pipelines guardadas aparecerán aquí.`},field:{name:`Nombre de la pipeline`,description:`Descripción`,targetPrinter:`Impresora de destino`,noTarget:`— Sin destino —`,targetKind:`Tipo de destino`,targetKindSpecific:`Impresora específica`,targetKindClass:`Clase de impresora`,targetModelClass:`Modelo de impresora`,fanoutStrategy:`Estrategia de distribución`,fanout:{max_parallel:`Máximo paralelo — distribuir entre cualquier impresora libre coincidente`,round_robin:`Round robin — alternar entre impresoras elegibles`,fill_one_first:`Llenar una primero — fijar todas las copias a una impresora`},fanoutShort:{max_parallel:`paralelo`,round_robin:`round robin`,fill_one_first:`primero uno`}},action:{save:`Guardar`,cancel:`Cancelar`,rename:`Renombrar`,delete:`Eliminar`},slot:{printer:`Impresora`,process:`Proceso`,filament:`Filamento`,filamentN:`Filamento {{n}}`,filamentAll:`Todos los {{n}} slots`,bed:`Placa`},group:{profiles:`Perfiles`,filaments:`Filamentos`},searchPlaceholder:`Buscar pipelines…`,filterTargetType:`Filtrar por tipo de destino`,filterTarget:`Filtrar por destino`,filter:{all:`Todos los destinos`,noTarget:`Sin destino`,count:`{{shown}} / {{total}}`,noMatches:`Ninguna pipeline coincide con los filtros actuales.`},toast:{saved:`Pipeline guardada`,saveFailed:`Error al guardar`,deleted:`Pipeline eliminada`,deleteFailed:`Error al eliminar`},noTargetHint:`Establece una impresora de destino para ejecutar`,noTargetWarning:`Establece una impresora de destino antes de ejecutar esta pipeline.`,runs:{lastRun:`Última ejecución`,status:{queued:`en cola`,slicing:`cortando`,dispatching:`enviando`,in_progress:`imprimiendo`,completed:`completada`,failed:`fallida`,partial_failure:`fallo parcial`,cancelled:`cancelada`}}}},notification:{printStarted:{title:`Impresión iniciada`,body:`{{printer}}: {{filename}} ha empezado a imprimirse`},printCompleted:{title:`Impresión completada`,body:`{{printer}}: {{filename}} se completó correctamente`},printFailed:{title:`Impresión fallida`,body:`{{printer}}: {{filename}} ha fallado`},printStopped:{title:`Impresión detenida`,body:`{{printer}}: {{filename}} se detuvo`},printProgress:{title:`Progreso de la impresión`,body:`{{printer}}: {{filename}} está al {{percent}}%`},printerOffline:{title:`Impresora desconectada`,body:`{{printer}} está desconectada`},printerError:{title:`Error de la impresora`,body:`{{printer}}: {{error}}`},filamentLow:{title:`Filamento bajo`,body:`{{printer}}: el filamento se está agotando`},maintenanceDue:{title:`Mantenimiento pendiente`,body:`{{printer}}: {{items}} necesitan atención`}},errors:{generic:`Algo salió mal`,networkError:`Error de red. Compruebe su conexión.`,notFound:`No encontrado`,unauthorized:`No autorizado`,serverError:`Error del servidor`,validationError:`Compruebe los datos introducidos`,printerConnectionFailed:`Error al conectar con la impresora`,saveFailed:`Error al guardar los cambios`,deleteFailed:`Error al eliminar`,loadFailed:`Error al cargar los datos`},hmsErrors:{title:`Errores - {{name}}`,noErrors:`No hay errores`,viewOnWiki:`Ver en la wiki de Bambu Lab`,mqttVerifyFailedRemedy:`Activa el modo desarrollador en la impresora, reinicia la impresora y vuelve a iniciar el trabajo.`,unknownCode:`Código HMS desconocido — consulta la wiki de Bambu Lab para más detalles.`,clearInstructions:`Borre los errores en la impresora para descartarlos aquí.`,clearErrors:`Borrar errores`,clearSuccess:`Errores HMS borrados`,clearFailed:`Error al borrar los errores HMS`,actionSuccess:`Acción enviada a la impresora`,actionFailed:`No se pudo enviar la acción`,runoutExpectedSlot:`El filamento se agotó en {{ranOut}}. La impresora ahora espera filamento compatible en {{expected}}. Inserta una bobina en {{expected}} y luego selecciona Reintentar.`,runoutExpectedSlotOnly:`La impresora está esperando filamento compatible en {{expected}}. Inserta una bobina ahí y luego selecciona Reintentar.`,runoutSlotUnknown:`El filamento se agotó y la impresión está en pausa. Bambuddy no pudo determinar qué slot espera ahora la impresora — revisa la pantalla de la impresora para ver el slot solicitado.`,actions:{RESUME_PRINTING:`Reanudar impresión`,RESUME_PRINTING_DEFECTS:`Reanudar (defectos aceptables)`,RESUME_PRINTING_PROBELM_SOLVED:`Reanudar (problema resuelto)`,STOP_PRINTING:`Detener impresión`,CHECK_ASSISTANT:`Ver asistente`,FILAMENT_EXTRUDED:`Filamento extruido, continuar`,RETRY_FILAMENT_EXTRUDED:`Aún no extruido, reintentar`,CONTINUE:`Finalizado, continuar`,LOAD_VIRTUAL_TRAY:`Cargar filamento`,OK_BUTTON:`OK`,FILAMENT_LOAD_RESUME:`Filamento cargado, reanudar`,JUMP_TO_LIVEVIEW:`Ver en vivo`,NO_REMINDER_NEXT_TIME:`No recordar la próxima vez`,REFRESH_NOZZLE:`Volver a comprobar`,IGNORE_NO_REMINDER_NEXT_TIME:`Ignorar y no recordar`,IGNORE_RESUME:`Ignorar y reanudar`,PROBLEM_SOLVED_RESUME:`Problema resuelto, reanudar`,TURN_OFF_FIRE_ALARM:`Entendido, apagar alarma de incendio`,RETRY_PROBLEM_SOLVED:`Reintentar (problema resuelto)`,CANCLE:`Cancelar`,STOP_DRYING:`Detener secado`,PROCEED:`Continuar`,OK_JUMP_RACK:`OK`,ABORT:`Cancelar`,DISABLE_PURIFICATION:`Desactivar purificación para esta impresión`,DONT_REMIND_NEXT_TIME:`No recordarme`,DBL_CHECK_CANCEL:`Cancelar`,DBL_CHECK_DONE:`Hecho`,DBL_CHECK_RETRY:`Reintentar`,DBL_CHECK_RESUME:`Reanudar`,DBL_CHECK_OK:`Confirmar`,REMOVE_CLOSE_BTN:`Cerrar`}},mqttDebug:{title:`Registro de depuración MQTT`,searchPlaceholder:`Buscar tema o carga útil...`,noMessages:`Aún no se han registrado mensajes`,startLoggingHint:`Haga clic en «Iniciar registro» para empezar a capturar mensajes MQTT`,noMessagesMatch:`Ningún mensaje coincide con su filtro`,adjustFilterHint:`Pruebe a ajustar su búsqueda o los criterios del filtro`,incoming:`Entrante`,outgoing:`Saliente`,loggingStopped:`Registro detenido`,loggingActive:`Registro activo - los mensajes se actualizarán automáticamente`,startLogging:`Iniciar registro`,stopLogging:`Detener registro`,clearLog:`Borrar registro`,topic:`Tema`,timestamp:`Marca de tiempo`,direction:`Dirección`,all:`Todos`},printerFiles:{zipStarted_one:`Se inició la descarga ZIP de {{count}} archivo`,zipStarted_other:`Se inició la descarga ZIP de {{count}} archivos`,zipPartial:`La descarga ZIP comenzó con {{successful}} de {{total}} archivos; no se pudieron recuperar los demás`,downloadFailed:`Error de descarga: {{error}}`,unknownError:`Error desconocido`,shiftSelectHint:`Mayús-clic para seleccionar un intervalo`,selectFile:`Seleccionar {{name}}`,deselectFile:`Deseleccionar {{name}}`,title:`Gestor de archivos`,storageUsed:`Usado:`,storageFree:`Libre:`,filterPlaceholder:`Filtrar archivos...`,deleteButton:`Eliminar`,deleteFiles:`Eliminar {{count}} archivos`,deleteFileConfirm:`¿Eliminar "{{name}}"? Esto no se puede deshacer.`,deleteFilesConfirm:`¿Eliminar {{count}} archivos seleccionados? Esto no se puede deshacer.`,noFiles:`No hay archivos en la impresora`,printerUnavailable:`El servicio de archivos de la impresora no está disponible. Inténtelo de nuevo cuando la impresora esté accesible.`,loadingFiles:`Cargando archivos...`,failedToLoad:`Error al cargar los archivos`,toast:{filesDeleted:`Se eliminaron {{count}} archivo(s)`,deleteFailed:`Error al eliminar: {{error}}`}},confirm:{delete:`¿Está seguro de que desea eliminar esto?`,unsavedChanges:`Tiene cambios sin guardar. ¿Está seguro de que desea salir?`,clearQueue:`¿Está seguro de que desea vaciar la cola?`},login:{title:`Inicio de sesión en Bambuddy`,subtitle:`Inicie sesión en su cuenta`,username:`Nombre de usuario`,usernamePlaceholder:`Introduzca su nombre de usuario`,usernameOrEmail:`Nombre de usuario o correo`,usernameOrEmailPlaceholder:`Nombre de usuario o @ correo`,password:`Contraseña`,passwordPlaceholder:`Introduzca su contraseña`,signIn:`Iniciar sesión`,signingIn:`Iniciando sesión...`,rememberMe:`Recordarme`,forgotPassword:`¿Olvidó su contraseña?`,autologinFailed:`El inicio de sesión SSO automático falló. Elija un proveedor abajo para continuar.`,localDisabledNotice:`El inicio de sesión local está deshabilitado. Use uno de los proveedores SSO de abajo.`,loginSuccess:`Sesión iniciada correctamente`,loginFailed:`Error al iniciar sesión`,enterCredentials:`Introduzca el nombre de usuario y la contraseña`,enterEmail:`Introduzca su dirección de correo`,oidcLoginFailed:`Error en el inicio de sesión con OIDC`,oidcErrors:{providerError:`El proveedor de identidad devolvió un error`,missingParameters:`A la respuesta de OIDC le faltan parámetros obligatorios`,invalidState:`El estado de OIDC no es válido o ya se ha usado`,stateExpired:`La sesión de inicio de sesión con OIDC ha caducado — inténtelo de nuevo`,providerNotFound:`Proveedor OIDC no encontrado`,discoveryFailed:`Error al obtener el documento de descubrimiento de OIDC`,invalidDiscovery:`El documento de descubrimiento de OIDC no es válido`,networkError:`Error de red durante el intercambio de tokens de OIDC`,badResponse:`Respuesta inesperada durante el intercambio de tokens de OIDC`,noIdToken:`El proveedor OIDC no devolvió un token de ID`,validationFailed:`Error en la validación del token de OIDC`,nonceMismatch:`Discrepancia de nonce de OIDC — posible ataque de repetición`,missingSubClaim:`Al token de OIDC le falta el claim sub`,noLinkedAccount:`Ninguna cuenta local está vinculada a esta identidad de OIDC`,accountInactive:`Su cuenta está inactiva`,userResolutionFailed:`Error al resolver su cuenta`,internalError:`Se produjo un error interno durante el inicio de sesión con OIDC`,tokenExchangeFailed:`Error en el intercambio de tokens de OIDC`},forgotPasswordTitle:`Contraseña olvidada`,forgotPasswordMessage:`Si ha olvidado su contraseña, póngase en contacto con el administrador de su sistema para restablecerla.`,forgotPasswordEmailMessage:`Introduzca su dirección de correo y le enviaremos una contraseña nueva.`,emailAddress:`Dirección de correo`,emailPlaceholder:`su.correo@ejemplo.com`,cancel:`Cancelar`,sending:`Enviando...`,sendResetEmail:`Enviar correo de restablecimiento`,howToReset:`Cómo restablecer su contraseña:`,resetStep1:`Póngase en contacto con su administrador de Bambuddy`,resetStep2:`Pídale que restablezca su contraseña en la gestión de usuarios`,resetStep3:`Puede establecerle una nueva contraseña temporal`,resetStep4:`Inicie sesión con la nueva contraseña y cámbiela en Ajustes`,gotIt:`Entendido`,resetPassword:{title:`Establecer nueva contraseña`,subtitle:`Introduzca y confirme su nueva contraseña a continuación.`,newPassword:`Nueva contraseña`,newPasswordPlaceholder:`Al menos 8 caracteres`,confirmPassword:`Confirmar contraseña`,confirmPasswordPlaceholder:`Repita la nueva contraseña`,saving:`Guardando…`,submit:`Establecer nueva contraseña`,backToLogin:`Volver al inicio de sesión`,passwordsDoNotMatch:`Las contraseñas no coinciden`,passwordTooShort:`La contraseña debe tener al menos 8 caracteres`,resetFailed:`Error al restablecer la contraseña. Es posible que el enlace haya caducado.`},twoFA:{title:`Autenticación de dos factores`,subtitle:`Su cuenta está protegida con 2FA. Introduzca el código de verificación a continuación.`,methodAuthenticator:`Aplicación de autenticación`,methodEmail:`Código por correo`,methodBackup:`Código de respaldo`,instructionsTotp:`Abra su aplicación de autenticación e introduzca el código de 6 dígitos para Bambuddy.`,instructionsEmail:`Se ha enviado un código de 6 dígitos a su dirección de correo. Caduca en 10 minutos.`,instructionsEmailNotSent:`Haga clic en el botón de abajo para recibir un código de verificación por correo.`,instructionsBackup:`Introduzca uno de sus códigos de recuperación de respaldo de 8 caracteres. Cada código solo se puede usar una vez.`,sendCodeButton:`Enviar código por correo`,sendingCode:`Enviando...`,resendCode:`Reenviar código`,codeLabel:`Código de verificación`,backupCodeLabel:`Código de respaldo`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Verificar`,verifyingButton:`Verificando...`,backToLogin:`← Volver al inicio de sesión`,orContinueWith:`o continuar con`,signInWith:`Iniciar sesión con {{provider}}`,enterCode:`Introduzca el código de verificación`,sendCodeFailed:`Error al enviar el código de verificación`,invalidCode:`Código no válido. Inténtelo de nuevo.`}},setup:{title:`Configuración de Bambuddy`,subtitle:`Configure la autenticación para su instancia de Bambuddy`,enableAuth:`Activar la autenticación`,adminAccount:`Cuenta de administrador`,adminAccountDesc:`Si ya existen usuarios administradores, la autenticación se activará usando las cuentas de administrador existentes. Deje los campos de abajo vacíos para usar los administradores existentes, o introduzca nuevas credenciales para crear un nuevo usuario administrador.`,adminUsername:`Nombre de usuario del administrador`,adminPassword:`Contraseña del administrador`,optionalIfAdminExists:`(opcional si existen usuarios administradores)`,adminUsernamePlaceholder:`Introduzca el nombre de usuario del administrador (opcional)`,adminPasswordPlaceholder:`Introduzca la contraseña del administrador (opcional)`,confirmPassword:`Confirmar contraseña`,confirmPasswordPlaceholder:`Confirme la contraseña del administrador`,settingUp:`Configurando...`,completeSetup:`Completar la configuración`,toast:{authEnabledAdminCreated:`Autenticación activada y usuario administrador creado`,authEnabledExistingAdmins:`Autenticación activada usando los usuarios administradores existentes`,setupCompleted:`Configuración completada`,enterBothCredentials:`Introduzca el nombre de usuario y la contraseña del administrador, o deje ambos vacíos para usar los usuarios administradores existentes`,passwordsDoNotMatch:`Las contraseñas no coinciden`,passwordTooShort:`La contraseña debe tener al menos 6 caracteres`}},changePassword:{title:`Cambiar contraseña`,currentPassword:`Contraseña actual`,currentPasswordPlaceholder:`Introduzca la contraseña actual`,newPassword:`Nueva contraseña`,newPasswordPlaceholder:`Introduzca la nueva contraseña (mín. 6 caracteres)`,confirmPassword:`Confirmar nueva contraseña`,confirmPasswordPlaceholder:`Confirme la nueva contraseña`,passwordsDoNotMatch:`Las contraseñas no coinciden`,passwordTooShort:`La contraseña debe tener al menos 6 caracteres`,changing:`Cambiando...`,success:`Contraseña cambiada correctamente`,failed:`Error al cambiar la contraseña`},plateAlert:{title:`¡Impresión en pausa!`,message:`Se han detectado objetos en la cama de impresión. La impresión se ha pausado automáticamente. Despeje la cama y reanude la impresión.`,understand:`Entendido`},camera:{title:`Vista de la cámara`,invalidPrinterId:`ID de impresora no válido`,live:`En directo`,snapshot:`Captura`,restartStream:`Reiniciar la transmisión`,refreshSnapshot:`Actualizar la captura`,fullscreen:`Pantalla completa`,exitFullscreen:`Salir de la pantalla completa`,connectingToCamera:`Conectando con la cámara...`,capturingSnapshot:`Capturando imagen...`,connectionLost:`Conexión perdida`,connectionFailed:`Error de conexión con la cámara`,reconnecting:`Reconectando en {{countdown}} s... (intento {{attempt}}/{{max}})`,reconnectNow:`Reconectar ahora`,cameraUnavailable:`Cámara no disponible`,cameraUnavailableDesc:`Asegúrese de que la impresora está encendida y conectada.`,noCamera:`No hay cámara disponible`,retry:`Reintentar`,cameraStream:`Transmisión de la cámara`,zoomOut:`Alejar`,zoomIn:`Acercar`,resetZoom:`Restablecer el zoom`,recording:`Grabando`,startRecording:`Iniciar grabación`,stopRecording:`Detener grabación`,chamberLight:`Conmutar la luz de la cámara`,unavailable:`Cámara no disponible`,diagnose:{button:`Diagnosticar`,modalTitle:`Diagnóstico de la cámara`,running:`Ejecutando el diagnóstico...`,runFailed:`No se pudo ejecutar el diagnóstico: {{error}}`,retry:`Ejecutar de nuevo`,stage:{tcp_reachable:`Accesibilidad de la red`,first_frame:`Captura de fotogramas`,live_stream_active:`Transmisión en directo activa`},summary:{all_ok:`La cámara funciona. El diagnóstico completó todas las etapas correctamente.`,live_stream_active_healthy:`La cámara está transmitiendo actualmente con fotogramas recientes — no se necesita ninguna prueba.`,printer_unreachable:`La impresora no es accesible. Compruebe la dirección IP, la conexión de red y que la impresora está encendida.`,camera_port_closed:`La impresora es accesible pero el puerto de la cámara está cerrado. Asegúrese de que el modo solo LAN y el modo desarrollador están activados en los ajustes de la impresora.`,no_frame:`Se conectó a la cámara pero no se recibieron fotogramas. Inténtelo de nuevo o compruebe que la cámara está activada en los ajustes de la impresora.`,unknown_failure:`El diagnóstico de la cámara falló por un motivo desconocido. Consulte el registro de soporte para más detalles.`},meta:{protocol:`Protocolo`,port:`Puerto`,profile:`Perfil`}}},groups:{title:`Gestión de grupos`,subtitle:`Gestione los grupos de permisos para el control de acceso`,backToSettings:`Volver a Ajustes`,createGroup:`Crear grupo`,noPermission:`No tiene permiso para acceder a esta página.`,system:`Sistema`,noDescription:`Sin descripción`,usersCount:`{{count}} usuarios`,permissionsCount:`{{count}} permisos`,edit:`Editar`,delete:`Eliminar`,toast:{created:`Grupo creado correctamente`,updated:`Grupo actualizado correctamente`,deleted:`Grupo eliminado correctamente`,enterGroupName:`Introduzca un nombre de grupo`},modal:{editGroup:`Editar grupo`,createGroup:`Crear grupo`,cancel:`Cancelar`,saving:`Guardando...`,creating:`Creando...`,saveChanges:`Guardar cambios`},form:{groupName:`Nombre del grupo`,groupNamePlaceholder:`Introduzca el nombre del grupo`,systemGroupWarning:`Los nombres de los grupos del sistema no se pueden cambiar`,description:`Descripción`,descriptionPlaceholder:`Introduzca una descripción (opcional)`,permissions:`Permisos ({{count}} seleccionados)`},deleteModal:{title:`Eliminar grupo`,message:`¿Está seguro de que desea eliminar este grupo? Los usuarios de este grupo perderán estos permisos.`,confirm:`Eliminar grupo`},editor:{title:`Editar grupo`,createTitle:`Crear grupo`,search:`Buscar permisos...`,selectAll:`Seleccionar todo`,clearAll:`Borrar todo`,permissionsSelected:`{{count}} seleccionados`,noResults:`Ningún permiso coincide con su búsqueda`,websocketHint:`Necesario para las actualizaciones en vivo. Sin este permiso, la interfaz recurre al sondeo periódico.`}},users:{title:`Gestión de usuarios`,subtitle:`Gestione los usuarios y su acceso a su instancia de Bambuddy`,backToSettings:`Volver a Ajustes`,createUser:`Crear usuario`,noPermission:`No tiene permiso para acceder a esta página.`,admin:`Administrador`,noGroups:`Sin grupos`,active:`Activo`,inactive:`Inactivo`,edit:`Editar`,delete:`Eliminar`,system:`Sistema`,noGroupsAvailable:`No hay grupos disponibles`,table:{username:`Nombre de usuario`,groups:`Grupos`,status:`Estado`,actions:`Acciones`},toast:{created:`Usuario creado correctamente`,updated:`Usuario actualizado correctamente`,deleted:`Usuario eliminado correctamente`,fillRequired:`Rellene todos los campos obligatorios`,passwordsDoNotMatch:`Las contraseñas no coinciden`,passwordTooShort:`La contraseña debe tener al menos 6 caracteres`,ldapProvisioned:`Usuario LDAP "{{username}}" aprovisionado`},modal:{createUser:`Crear usuario`,editUser:`Editar usuario`,cancel:`Cancelar`,creating:`Creando...`,saving:`Guardando...`,saveChanges:`Guardar cambios`,advancedAuthSubtitle:`con autenticación avanzada`,tabsAriaLabel:`Origen del usuario`,localTab:`Local`,ldapTab:`LDAP`,ldapSearchLabel:`Buscar en el directorio`,ldapSearchPlaceholder:`Escriba un nombre de usuario, nombre o correo...`,ldapMinChars:`Escriba al menos 2 caracteres para buscar`,ldapTypeToSearch:`Empiece a escribir para buscar en el directorio LDAP`,ldapSearching:`Buscando en el directorio...`,ldapNoResults:`No hay usuarios coincidentes en el directorio`,ldapSearchError:`Error en la búsqueda en el directorio. Compruebe el estado del servidor LDAP.`,ldapAlreadyProvisioned:`Ya aprovisionado`,ldapSelectedLabel:`Seleccionado`,ldapProvision:`Aprovisionar usuario`,ldapProvisioning:`Aprovisionando...`,ldapErrorProvision:`Error en el aprovisionamiento. Compruebe el estado del servidor LDAP e inténtelo de nuevo.`},form:{username:`Nombre de usuario`,usernamePlaceholder:`Introduzca el nombre de usuario`,email:`Correo`,emailPlaceholder:`usuario@ejemplo.com`,password:`Contraseña`,passwordPlaceholder:`Introduzca la contraseña`,confirmPassword:`Confirmar contraseña`,confirmPasswordPlaceholder:`Confirme la contraseña`,newPasswordPlaceholder:`Introduzca la nueva contraseña`,confirmNewPasswordPlaceholder:`Confirme la nueva contraseña`,leaveBlankToKeep:`dejar en blanco para conservar la actual`,groups:`Grupos`,optional:`opcional`,autoGeneratedPassword:`Se generará automáticamente una contraseña segura y se enviará al usuario por correo.`,passwordManagedByAdvancedAuth:`La contraseña la gestiona la autenticación avanzada. Use «Restablecer contraseña» para enviar una nueva contraseña al usuario por correo.`,resetPassword:`Restablecer contraseña`,resettingPassword:`Restableciendo la contraseña...`},deleteModal:{title:`Eliminar usuario`,message:`¿Está seguro de que desea eliminar este usuario? Esta acción no se puede deshacer.`,confirm:`Eliminar usuario`}},streamOverlay:{title:`Superposición de transmisión`,invalidPrinterId:`ID de impresora no válido`,cameraStream:`Transmisión de la cámara`,progress:`Progreso`,eta:`Tiempo estimado`,printerIdle:`La impresora está inactiva`,printerOffline:`Impresora desconectada`,builder:{title:`Superposición de emisión`,description:`Crea la URL de una superposición de emisión: una vista de cámara a pantalla completa con los datos de impresión en directo encima, para OBS, una pantalla de pared o cualquier fuente de navegador. Elige los campos y copia la URL.`,printer:`Impresora`,size:`Tamaño del texto`,sizeSmall:`Pequeño`,sizeMedium:`Mediano`,sizeLarge:`Grande`,fps:`Fotogramas por segundo`,fpsHint:`Las cámaras A1 y P1 no pasan de unos 5 fps, sea cual sea el valor solicitado.`,token:`Token de superposición (opcional)`,tokenHint:`Solo hace falta si el inicio de sesión está activado: OBS no tiene sesión propia. Crea uno arriba con el ámbito Superposición de emisión.`,tokenWarning:`Esta URL contiene un token: cualquiera que pueda leerla verá la emisión y el nombre del archivo. Revoca el token para cortar el acceso.`,fields:`Campos que mostrar`,fieldPrinter:`Nombre de la impresora`,fieldFilename:`Nombre del archivo`,fieldStatus:`Estado`,fieldProgress:`Barra de progreso`,fieldLayers:`Número de capas`,fieldEta:`Tiempo restante y hora de fin`,fieldCamera:`Imagen de la cámara`,chamberHint:`La temperatura de la cámara de impresión solo aparece en modelos con sensor real: las P1 y A1 informan un valor sin sentido, así que se omite.`,urlTitle:`URL de la superposición`,open:`Abrir`,showPreview:`Mostrar vista previa`,hidePreview:`Ocultar vista previa`,previewTitle:`Vista previa de la superposición`},status:{printing:`Imprimiendo`,paused:`En pausa`,finished:`Finalizada`,failed:`Fallida`,idle:`Inactiva`,unknown:`Desconocido`}},profiles:{title:`Perfiles`,subtitle:`Gestione sus preajustes del laminador y las calibraciones de avance de presión`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Perfiles locales`,kprofiles:`Perfiles K`},orcaCloud:{connectedAs:`Conectado como`,connectedShort:`Conectado a Orca Cloud`,logout:`Desconectar`,noLogoutPermission:`No tienes permiso para desconectar`,noConnectPermission:`No tienes permiso para conectar a Orca Cloud`,retry:`Reintentar`,connectButton:`Conectar Orca Cloud`,connect:{title:`Conectar a Orca Cloud`,description:`Inicia sesión en tu cuenta Orca Cloud para sincronizar tus perfiles de slicer en Bambuddy.`},device:{title:`Aprueba Bambuddy en Orca Cloud`,instruction:`Abre Orca Cloud y aprueba este código. Bambuddy se conecta automáticamente en cuanto lo apruebes.`,codeLabel:`Tu código de emparejamiento`,openButton:`Abrir la página de aprobación de Orca Cloud`,manualHint:`O ve a {{url}} e introduce el código de arriba.`,waiting:`Esperando a que apruebes…`,cancel:`Cancelar`},profiles:{title:`Tus perfiles de Orca Cloud ({{count}})`,refresh:`Actualizar`,empty:`Aún no hay perfiles en tu cuenta de Orca Cloud.`},toast:{disconnected:`Desconectado de Orca Cloud`},errors:{startFailed:`No se pudo iniciar el inicio de sesión de Orca Cloud.`,denied:`El emparejamiento fue rechazado en Orca Cloud.`,expired:`El código de emparejamiento caducó. Haz clic en Conectar para intentarlo de nuevo.`,pollFailed:`Se perdió la conexión mientras se esperaba la aprobación. Inténtalo de nuevo.`}},localProfiles:{title:`Perfiles locales`,subtitle:`Importe y gestione preajustes del laminador desde OrcaSlicer`,import:`Importar perfiles`,importDesc:`Suelte aquí archivos .bbscfg, .bbsflmt, .orca_filament, .zip o .json`,importing:`Importando...`,search:`Buscar preajustes locales...`,noPresets:`Aún no hay preajustes locales`,noSearchResults:`Ningún preajuste coincide con su búsqueda`,badge:`Local`,edit:`Editar`,delete:`Eliminar`,cancel:`Cancelar`,deleteConfirmTitle:`Eliminar preajuste`,deleteConfirm:`¿Está seguro de que desea eliminar este preajuste? Esto no se puede deshacer.`,source:`Origen`,inheritsFrom:`Hereda de`,filamentType:`Tipo`,vendor:`Proveedor`,compatiblePrinters:`Impresoras`,nozzleTemp:`Temp. de la boquilla`,cost:`Coste`,density:`Densidad`,pressureAdvance:`Avance de presión`,filament:`Filamento`,process:`Proceso`,printer:`Impresora`,toast:{importSuccess:`{{count}} preajuste(s) importado(s)`,importSkipped:`{{count}} preajuste(s) omitido(s) (duplicados)`,importError:`{{count}} error(es) durante la importación`,deleted:`Preajuste eliminado`,updated:`Preajuste actualizado`}},connectedAs:`Conectado como`,signInExpiredTitle:`La sesión de Bambu Cloud ha caducado`,signInExpiredBody:`Bambu Lab ya no acepta el token almacenado. Inicie sesión de nuevo para restaurar los perfiles en la nube, las importaciones de MakerWorld y las comprobaciones de firmware.`,logout:`Cerrar sesión`,noLogoutPermission:`No tiene permiso para cerrar sesión`,failedToLoad:`Error al cargar los perfiles`,retry:`Reintentar`,time:{justNow:`Ahora mismo`,minsAgo:`hace {{count}} min`,hoursAgo:`hace {{count}} h`,daysAgo:`hace {{count}} d`},toast:{loggedOut:`Sesión cerrada`},login:{title:`Conectarse a Bambu Cloud`,subtitle:`Sincronice sus preajustes del laminador entre dispositivos`,email:`Correo`,password:`Contraseña`,region:`Región`,regionGlobal:`Global`,regionChina:`China`,verificationCode:`Código de verificación`,totpCode:`Código del autenticador`,checkEmail:`Compruebe su correo ({{email}}) en busca de un código de 6 dígitos`,enterTotpHint:`Introduzca el código de 6 dígitos de su aplicación de autenticación`,accessToken:`Token de acceso`,accessTokenHint:`Pegue su token de acceso de Bambu Cloud. Las cuentas de la región de China deben usar esta vía (vinculada al teléfono — inicio de sesión por correo no disponible). Consulte la wiki para saber cómo obtener el token de las cookies de MakerWorld.`,back:`Atrás`,loginButton:`Iniciar sesión`,verifyButton:`Verificar`,setTokenButton:`Establecer token`,useToken:`Usar token de acceso en su lugar`,captchaTitle:`Bambu Cloud solicita un CAPTCHA`,captchaBody:`Bambu está exigiendo un CAPTCHA a tu red antes de aceptar un inicio de sesión, y ese desafío no se puede responder desde Bambuddy. Tu correo y tu contraseña no son el problema. El bloqueo está ligado a tu dirección IP pública y suele desaparecer solo en unas horas; reintentar repetidamente lo prolonga. Para entrar ahora, usa un token de acceso obtenido en una sesión del navegador.`,useEmail:`Iniciar sesión con correo en su lugar`,toast:{loggedIn:`Sesión iniciada correctamente`,codeSent:`Código de verificación enviado a su correo`,enterTotp:`Introduzca el código de su aplicación de autenticación`,tokenSet:`Token establecido correctamente`}},presets:{myPreset:`Mi preajuste (editable)`,duplicate:`Duplicar`,editable:`Editable`,failedToLoadDetails:`Error al cargar los detalles del preajuste`,deleteConfirm:`¿Eliminar este preajuste?`,deleteWarning:`Esto eliminará permanentemente "{{name}}" de Bambu Cloud. Esto no se puede deshacer.`,noDuplicatePermission:`No tiene permiso para duplicar preajustes`,noEditPermission:`No tiene permiso para editar preajustes`,noDeletePermission:`No tiene permiso para eliminar preajustes`,types:{filament:`Preajuste de filamento`,printer:`Preajuste de impresora`,process:`Preajuste de proceso`},toast:{deleted:`Preajuste eliminado`,created:`Preajuste creado`,updated:`Preajuste actualizado`,duplicated:`Preajuste duplicado`,fieldAdded:`Campo "{{key}}" añadido`,exported:`Preajuste exportado`},baseLabel:`Base: {{name}}`,currentLabel:`Actual: {{name}}`,newPreset:`Nuevo preajuste`,editPreset:`Editar preajuste`,duplicatePreset:`Duplicar preajuste`,createNewPreset:`Crear nuevo preajuste`,customizeSettings:`Personalice los ajustes de su nuevo preajuste`,compareWithBase:`Comparar con el preajuste base`,compare:`Comparar`,basePreset:`Preajuste base`,selectBasePreset:`Seleccionar preajuste base...`,presetName:`Nombre del preajuste`,myCustomPreset:`Mi preajuste personalizado`,inheritsFrom:`Hereda de`,dropJsonToImport:`Suelte un JSON para importar`,tabs:{common:`Común`,allFields:`Todos los campos`},availableFields:`Campos disponibles`,searchFieldsPlaceholder:`Buscar campos...`,noMatchingFields:`No hay campos coincidentes`,allFieldsAdded:`Todos los campos añadidos`,addCustomField:`Añadir campo personalizado`,yourOverrides:`Sus anulaciones`,noOverridesYet:`Aún no hay anulaciones`,clickFieldsToAdd:`Haga clic en los campos de la izquierda para añadirlos`,saveAsTemplate:`Guardar como plantilla`,jsonTip:`Consejo: arrastre y suelte un archivo .json en cualquier parte de esta ventana para importar ajustes`},cloudView:{searchPlaceholder:`Buscar preajustes...`,templates:`Plantillas`,refresh:`Actualizar`,newPreset:`Nuevo preajuste`,clearFilters:`Borrar filtros`,compareMode:`Modo de comparación`,selectAnotherPreset:`Seleccione otro preajuste de {{type}}`,clickTwoPresets:`Haga clic en dos preajustes del mismo tipo para compararlos`,selectFirst:`1. Seleccione el primero`,selectSecond:`2. Seleccione el segundo`,compareNow:`Comparar ahora`,lastSynced:`Última sincronización:`,showingCount:`Mostrando {{showing}} de {{total}} preajustes`,noPresetsFound:`No se encontraron preajustes`,columns:{filament:`Filamento`,process:`Proceso`,printer:`Impresora`},noFilamentPresets:`No hay preajustes de filamento`,noProcessPresets:`No hay preajustes de proceso`,noPrinterPresets:`No hay preajustes de impresora`,filters:{type:`Tipo`,owner:`Propietario`,printer:`Impresora`,nozzle:`Boquilla`,filament:`Filamento`,layer:`Capa`,all:`Todos`,myPresets:`Mis preajustes`,builtIn:`Integrados`,process:`Proceso`},noTemplatesPermission:`No tiene permiso para gestionar plantillas`,noRefreshPermission:`No tiene permiso para actualizar perfiles`,noCreatePermission:`No tiene permiso para crear preajustes`},templates:{title:`Plantillas rápidas`,noTemplates:`Aún no hay plantillas`,createFirst:`Cree plantillas desde el editor de preajustes`,typeFilter:`Tipo:`,deleteTitle:`Eliminar plantilla`,deleteWarning:`Esta acción no se puede deshacer`,deleteConfirm:`¿Está seguro de que desea eliminar "{{name}}"?`,namePlaceholder:`Nombre de la plantilla`,descriptionPlaceholder:`Descripción`,settingsJson:`Ajustes (JSON)`,fieldsCount:`{{count}} campos`,shownInModals:`Mostrada en las ventanas`,hiddenInModals:`Oculta en las ventanas`,apply:`Aplicar`,toast:{deleted:`Plantilla eliminada`,updated:`Plantilla actualizada`,created:`Plantilla creada`,applied:`Plantilla aplicada`}}},support:{debugLoggingActive:`El registro de depuración está activo`,manageLogs:`Gestionar`,collectItem7:`Conectividad de la impresora y versiones de firmware`,collectItem8:`Estado de las integraciones (Spoolman, MQTT, HA)`,collectItem9:`Interfaces de red (solo subredes)`,collectItem10:`Versiones de los paquetes de Python`,collectItem11:`Comprobaciones de estado de la base de datos`,collectItem12:`Detalles del entorno de Docker`,bundleGenerating:`Generando paquete...`,bundleStepConnection:`Ejecutando comprobaciones de conectividad de impresoras`,bundleStepVirtualPrinters:`Ejecutando comprobaciones de configuración de impresoras virtuales`,bundleStepLogScan:`Analizando los registros recientes en busca de problemas conocidos`,bundleStepBuild:`Creando el archivo ZIP del paquete de soporte`},fileManager:{variants:{badge:`{{count}} versiones`,groupAction:`Agrupar como versiones`,groupTooltip:`Marcar estos archivos como el mismo trabajo laminado para distintas impresoras`,grouped:`{{count}} archivos agrupados como versiones`,printAlternatives:`Imprimir ({{count}} alternativas)`},title:`Gestor de archivos`,subtitle:`Organice y gestione sus archivos de impresión`,uploadFiles:`Subir archivos`,newFolder:`Nueva carpeta`,folderName:`Nombre de la carpeta`,folderNamePlaceholder:`p. ej., Piezas funcionales`,renameFile:`Renombrar archivo`,renameFolder:`Renombrar carpeta`,invalidFilenameChar:`El carácter "{{char}}" no está permitido en nombres de archivos de impresión. La tarjeta SD de la impresora rechaza: < > : " / \\ | ? *`,moveFiles:`Mover {{count}} archivo(s)`,rootNoFolder:`Raíz (sin carpeta)`,current:`actual`,linkFolder:`Vincular carpeta`,linkFolderDescription:`Vincule "{{name}}" a un proyecto o archivo para un acceso rápido.`,project:`Proyecto`,archive:`Archivo`,noProjectsFound:`No se encontraron proyectos`,noArchivesFound:`No se encontraron archivos`,unlink:`Desvincular`,link:`Vincular`,dragDropFiles:`Arrastre y suelte archivos aquí`,dropFilesHere:`Suelte archivos aquí`,releaseToUpload:`Suelte para subir`,orClickToBrowse:`o haga clic para examinar`,allFileTypesSupported:`Se admiten todos los tipos de archivo. Los archivos ZIP se extraerán.`,zipFilesDetected:`Archivos ZIP detectados`,zipExtractOptions:`Los archivos ZIP se extraerán. Elija cómo gestionar la estructura de carpetas:`,preserveZipStructure:`Conservar la estructura de carpetas del ZIP`,createFolderFromZip:`Crear una carpeta a partir del nombre del archivo ZIP`,stlThumbnailGeneration:`Generación de miniaturas STL`,zipMayContainStl:`Los archivos ZIP pueden contener archivos STL. Se pueden generar miniaturas durante la extracción.`,thumbnailsCanBeGenerated:`Se pueden generar miniaturas para los archivos STL. Los modelos grandes pueden tardar más en procesarse.`,generateThumbnailsForStl:`Generar miniaturas para los archivos STL`,threemfDetected:`Archivos 3MF detectados`,threemfExtractionInfo:`El modelo de impresora, el material, el color y los ajustes de impresión se extraerán automáticamente de los archivos 3MF.`,willBeExtracted:`Se extraerá`,filesExtracted:`{{count}} archivos extraídos`,uploadComplete:`Subida completada: {{succeeded}} con éxito`,uploadFailed:`Error al subir`,zipFilesFailed:`{{count}} archivos fallidos`,uploading:`Subiendo...`,changeLink:`Cambiar enlace...`,linkTo:`Vincular a...`,linkToProjectOrArchive:`Vincular a un proyecto o archivo`,generateThumbnail:`Generar miniatura`,generateThumbnails:`Generar miniaturas`,generateThumbnailsForMissing:`Generar miniaturas para los archivos STL que no las tienen`,gridView:`Vista de cuadrícula`,listView:`Vista de lista`,lowDiskSpaceWarning:`Advertencia de poco espacio en disco`,lowDiskSpaceDetails:`Solo {{free}} libres de {{total}} en total. El umbral está establecido en {{threshold}} GB en los ajustes.`,files:`Archivos`,folders:`Carpetas`,size:`Tamaño`,free:`Libre`,allFiles:`Todos los archivos`,allExternal:`Externos`,externalIsEmpty:`Sin archivos externos`,externalEmptyDescription:`Los archivos de tus carpetas externas vinculadas aparecerán aquí.`,wrap:`Ajustar`,enableTextWrapping:`Activar el ajuste de texto`,disableTextWrapping:`Desactivar el ajuste de texto`,collapse:`Contraer`,collapseFoldersByDefault:`Contraer las carpetas de forma predeterminada`,expandFoldersByDefault:`Expandir las carpetas de forma predeterminada`,folderSort:`Ordenar carpetas`,folderSortByName:`Por nombre`,folderSortByActivity:`Por actividad reciente`,dragToResizeTooltip:`Arrastre para redimensionar, doble clic para restablecer`,searchFiles:`Buscar archivos...`,searchSubfoldersHint:`Incluyendo subcarpetas`,readme:{truncated:`Truncado`,show:`Mostrar README`,hide:`Ocultar README`,label:`README`},tags:{title:`Etiquetas`,subtitle:`Etiqueta archivos para filtros transversales — juguetes, apto para niños, solo PETG, lo que necesites.`,manage:`Etiquetas`,manageTitle:`Gestionar el catálogo de etiquetas`,add:`Nueva etiqueta`,edit:`Renombrar etiqueta`,name:`Nombre`,fileCount:`Archivos`,empty:`Aún no hay etiquetas. Crea una para empezar a etiquetar archivos.`,noMatches:`No hay etiquetas que coincidan.`,createPlaceholder:`p. ej. juguetes, apto-niños, petg`,createButton:`Crear`,nameRequired:`El nombre es obligatorio.`,searchPlaceholder:`Filtrar etiquetas...`,created:`Etiqueta creada.`,updated:`Etiqueta renombrada.`,deleted:`Etiqueta eliminada.`,saveFailed:`No se pudo guardar la etiqueta.`,deleteFailed:`No se pudo eliminar la etiqueta.`,applyFailed:`No se pudieron aplicar las etiquetas.`,applyAdd:`Añadir etiquetas`,applyRemove:`Quitar etiquetas`,applyAddSuccess:`Se añadieron {{count}} etiqueta(s) en {{files}} archivo(s).`,applyRemoveSuccess:`Se quitaron {{count}} etiqueta(s) en {{files}} archivo(s).`,actionAdd:`Añadir a los archivos seleccionados`,actionRemove:`Quitar de los archivos seleccionados`,tagAction:`Etiquetar`,bulkTitle:`Etiquetar {{count}} archivo(s) seleccionado(s)`,bulkTooltip:`Añadir o quitar etiquetas en cada archivo seleccionado.`,noPermission:`No tienes permiso para etiquetar archivos.`,filterLabel:`Filtrando por:`,clearAll:`Limpiar todo`,confirmDelete:`¿Eliminar la etiqueta "{{name}}"?`,confirmDeleteMessage:`Esto elimina la etiqueta del catálogo. Los archivos conservan sus otras etiquetas.`,confirmDeleteInUseMessage:`Esta etiqueta está en {{count}} archivo(s). Al eliminarla desaparece de todos; los archivos en sí no se tocan.`,editAria:`Editar {{name}}`,deleteAria:`Eliminar {{name}}`},allTypes:`Todos los tipos`,prints:`Impresiones`,ascending:`Ascendente`,descending:`Descendente`,showModified:`Mostrar fechas de modificación`,hideModified:`Ocultar fechas de modificación`,lastModified:`Última modificación`,lastActivity:`Última actividad`,resultsCount:`{{showing}} de {{total}} archivos`,selectAll:`Seleccionar todo`,deselectAll:`Deseleccionar todo`,selected:`{{count}} seleccionados`,adding:`Añadiendo...`,loadingFiles:`Cargando archivos...`,folderIsEmpty:`La carpeta está vacía`,noFilesYet:`Aún no hay archivos`,folderEmptyDescription:`Suba archivos o mueva archivos a esta carpeta para empezar.`,noFilesDescription:`Suba archivos para empezar a organizar sus archivos relacionados con la impresión.`,noMatchingFiles:`No hay archivos coincidentes`,noMatchingFilesDescription:`Ningún archivo coincide con su búsqueda o los criterios de filtro actuales.`,clearFilters:`Borrar filtros`,printedCount:`Impreso {{count}} veces`,uploadedBy:`Subido por`,deleteFolder:`Eliminar carpeta`,deleteFile:`Eliminar archivo`,deleteFilesCount:`Eliminar {{count}} archivos`,deleteFolderConfirm:`¿Está seguro de que desea eliminar esta carpeta? Todos los archivos que contiene también se eliminarán.`,deleteFileConfirm:`¿Está seguro de que desea eliminar este archivo?`,deleteFilesConfirm:`¿Está seguro de que desea eliminar {{count}} archivos seleccionados? Esta acción no se puede deshacer.`,deleting:`Eliminando...`,noPermissionRenameFolder:`No tiene permiso para renombrar carpetas`,noPermissionLinkFolder:`No tiene permiso para vincular carpetas`,noPermissionDeleteFolder:`No tiene permiso para eliminar carpetas`,onlyEmptyFoldersDeletable:`Solo puede eliminar carpetas vacías`,noPermissionPrint:`No tiene permiso para imprimir`,noPermissionAddToQueue:`No tiene permiso para añadir a la cola`,noPermissionSlice:`No tiene permiso para laminar archivos`,noPermissionDownload:`No tiene permiso para descargar archivos`,noPermissionPreview:`No tienes permiso para previsualizar archivos`,preview3d:`Vista previa 3D`,noPermissionRenameFile:`No tiene permiso para renombrar este archivo`,noPermissionGenerateThumbnail:`No tiene permiso para generar miniaturas`,noPermissionDeleteFile:`No tiene permiso para eliminar este archivo`,noPermissionCreateFolder:`No tiene permiso para crear carpetas`,noPermissionUpload:`No tiene permiso para subir archivos`,noPermissionMoveFiles:`No tiene permiso para mover archivos`,noPermissionDeleteFiles:`No tiene permiso para eliminar archivos`,linkExternal:`Vincular externa`,linkExternalFolder:`Vincular carpeta externa`,linkExternalFolderDescription:`Monte un directorio del host (NAS, USB, recurso compartido de red) en el gestor de archivos. Los archivos no se copian — se accede a ellos directamente desde la ruta original.`,externalFolderNamePlaceholder:`p. ej., Impresiones del NAS`,externalPath:`Ruta del host`,externalPathHelp:`Ruta absoluta al directorio en el host de Docker. Debe estar montado por enlace en el contenedor.`,readOnly:`Solo lectura`,readOnlyHelp:`impide las subidas y eliminaciones`,showHiddenFiles:`Mostrar archivos ocultos (con punto)`,externalFolder:`Carpeta externa`,scanFolder:`Escanear`,toast:{folderCreated:`Carpeta creada`,openInSlicerFailed:`No se pudo abrir en el laminador`,folderDeleted:`Carpeta eliminada`,fileDeleted:`Archivo eliminado`,filesDeleted:`Se eliminaron {{count}} archivos`,filesMoved:`Archivos movidos`,folderLinked:`Carpeta vinculada`,folderUnlinked:`Carpeta desvinculada`,externalFolderLinked:`Carpeta externa vinculada y escaneada`,folderScanned:`Escaneo completado: {{added}} añadidos, {{removed}} eliminados`,addedToQueue:`Se añadieron {{count}} archivo(s) a la cola`,addedToQueuePartial:`Se añadieron {{added}} archivo(s), {{failed}} fallidos`,failedToAddToQueue:`Error al añadir los archivos: {{error}}`,fileRenamed:`Archivo renombrado`,folderRenamed:`Carpeta renombrada`,thumbnailsGenerated:`Se generaron {{count}} miniatura(s)`,thumbnailsGeneratedPartial:`Se generaron {{succeeded}} miniatura(s), {{failed}} fallidas`,noStlMissingThumbnails:`No hay archivos STL sin miniaturas`,failedToGenerateThumbnails:`Error al generar las miniaturas: {{error}}`,thumbnailGenerated:`Miniatura generada`,failedToGenerateThumbnail:`Error al generar la miniatura: {{error}}`}},projects:{parentLabel:`Proyecto principal`,parentNone:`Ninguno (proyecto de nivel superior)`,parentHint:`Anida este proyecto en otro para que sus cifras se sumen en un proyecto maestro`,partOf:`Parte de {{name}}`,subProjectCount:`{{count}} subproyectos`,subProjectsOf:`Subproyectos de {{name}}`,collapseSubProjects:`Contraer subproyectos`,expandSubProjects:`Expandir subproyectos`,title:`Proyectos`,subtitle:`Organice y haga el seguimiento de sus proyectos de impresión 3D`,newProject:`Nuevo proyecto`,editProject:`Editar proyecto`,deleteProject:`Eliminar proyecto`,projectName:`Nombre del proyecto`,description:`Descripción`,noProjects:`Aún no hay proyectos`,noProjectsFiltered:`No hay proyectos {{status}}`,noProjectsFilteredHelp:`No tiene ningún proyecto {{status}}. Los proyectos aparecerán aquí cuando cambie su estado.`,createFirst:`Cree su primer proyecto para empezar a organizar impresiones relacionadas, hacer el seguimiento del progreso y gestionar sus construcciones.`,createFirstButton:`Cree su primer proyecto`,create:`Crear`,files:`Archivos`,prints:`Impresiones`,plates:`camas`,parts:`piezas`,lastModified:`Última modificación`,deleteConfirm:`¿Está seguro de que desea eliminar este proyecto? Los archivos y los elementos de la cola se desvincularán pero no se eliminarán.`,addFiles:`Añadir archivos`,removeFile:`Quitar archivo`,viewDetails:`Ver detalles`,namePlaceholder:`p. ej., Construcción de Voron 2.4`,descriptionPlaceholder:`Descripción opcional...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`La URL debe empezar por http:// o https://`,openExternalUrl:`Abrir la URL del proyecto`,coverImageLabel:`Foto de portada`,coverImageAlt:`Foto de portada del proyecto`,coverImageUpload:`Subir`,coverImageReplace:`Reemplazar`,coverImageRemove:`Quitar`,color:`Color`,targetPlates:`Camas objetivo`,targetPlatesPlaceholder:`p. ej., 25`,targetPlatesHelp:`Número de trabajos de impresión`,targetParts:`Piezas objetivo`,targetPartsPlaceholder:`p. ej., 150`,targetPartsHelp:`Total de objetos necesarios`,targetSets:`Copias por archivo`,targetSetsPlaceholder:`p. ej., 10`,targetSetsHelp:`Veces que debe imprimirse cada archivo imprimible`,tagsLabel:`Etiquetas (separadas por comas)`,tagsPlaceholder:`p. ej., voron, funcional, regalo`,dueDate:`Fecha límite`,priority:`Prioridad`,priorityLow:`Baja`,priorityNormal:`Normal`,priorityHigh:`Alta`,priorityUrgent:`Urgente`,statusActive:`Activo`,statusCompleted:`Completado`,statusArchived:`Archivado`,done:`Hecho`,completed:`completadas`,failed:`fallidas`,inQueue:`en cola`,noPrintsYet:`Aún no hay impresiones`,printJobs:`Trabajos de impresión (camas)`,partsPrinted:`Piezas impresas`,failedParts:`Piezas fallidas`,import:`Importar`,export:`Exportar`,importProject:`Importar proyecto`,exportAll:`Exportar todos los proyectos`,loading:`Cargando proyectos...`,noEditPermission:`No tiene permiso para editar proyectos`,noDeletePermission:`No tiene permiso para eliminar proyectos`,noCreatePermission:`No tiene permiso para crear proyectos`,noImportPermission:`No tiene permiso para importar proyectos`,noExportPermission:`No tiene permiso para exportar proyectos`,toast:{created:`Proyecto creado`,updated:`Proyecto actualizado`,deleted:`Proyecto eliminado`,imported:`Proyecto importado`,multipleImported:`{{count}} proyectos importados`,importFailed:`Error en la importación`,exported:`Proyectos exportados (solo metadatos)`}},projectDetail:{notFound:`Proyecto no encontrado`,backToProjects:`Volver a Proyectos`,export:`Exportar`,exportProject:`Exportar proyecto`,noExportPermission:`No tiene permiso para exportar proyectos`,noEditPermission:`No tiene permiso para editar proyectos`,partOf:`Parte de:`,priorityLabel:`Prioridad:`,noPrints:`Aún no hay impresiones en este proyecto`,status:{active:`Activo`,completed:`Completado`,archived:`Archivado`},priority:{low:`Baja`,normal:`Normal`,high:`Alta`,urgent:`Urgente`},dueDate:{overdue:`Atrasado`,today:`Vence hoy`,daysLeft:`Quedan {{count}} días`},progress:{platesProgress:`Progreso de camas`,partsProgress:`Progreso de piezas`,setsProgress:`Juegos completos`,sets:`juegos`,setsHint:`Un juego está completo cuando cada archivo imprimible alcanza este número`,printJobs:`trabajos de impresión`,parts:`piezas`,percentComplete:`{{percent}}% completado`,remaining:`{{count}} restantes`},stats:{printJobs:`Trabajos de impresión`,total:`total`,failed:`{{count}} fallidos`,partsPrinted:`{{count}} piezas impresas`,printTime:`Tiempo de impresión`,filamentUsed:`Filamento usado`},cost:{title:`Seguimiento de costes`,filamentCost:`Coste del filamento`,energy:`Energía`,totalCost:`Coste total`,total:`Total`,includesBom:`incl. lista de materiales`,budget:`Presupuesto`,remaining:`Restante`},subProjects:{title:`Subproyectos ({{count}})`,jobs:`{{count}} trabajos`},rollup:{title:`Incluyendo {{count}} subproyectos`,progress:`Progreso general`,percentComplete:`{{percent}}% completado`},notes:{title:`Notas`,noEditPermission:`No tiene permiso para editar notas`,placeholder:`Añada notas sobre este proyecto...`,empty:`Aún no hay notas. Haga clic en Editar para añadir notas.`},files:{title:`Archivos`,linkFolders:`Vincule carpetas del gestor de archivos`,forQuickAccess:`a este proyecto para un acceso rápido.`,fileCount:`{{count}} archivo(s)`,empty:`No hay carpetas vinculadas. Vaya al gestor de archivos y vincule una carpeta a este proyecto.`,printedCount:`Impreso {{count}} veces`,progressTooltip:`{{done}} de {{target}} impresiones completadas`,noFiles:`No hay archivos en esta carpeta.`},bom:{title:`Lista de materiales`,acquired:`{{completed}}/{{total}} adquiridos`,showAll:`Mostrar todo`,hideDone:`Ocultar los hechos`,addPart:`Añadir pieza`,noAddPermission:`No tiene permiso para añadir piezas`,partNamePlaceholder:`Nombre de la pieza (p. ej., tornillos M3x8)`,partName:`Nombre de la pieza`,qty:`Cant.`,price:`Precio ({{currency}})`,sourcingUrlPlaceholder:`URL de aprovisionamiento (opcional)`,remarksPlaceholder:`Observaciones (opcional)`,deletePart:`Eliminar pieza`,deleteConfirm:`¿Está seguro de que desea eliminar "{{name}}"?`,noUpdatePermission:`No tiene permiso para actualizar piezas`,noEditPermission:`No tiene permiso para editar piezas`,noDeletePermission:`No tiene permiso para eliminar piezas`,totalCost:`Coste total:`,empty:`No hay piezas en la lista de materiales. Añada hardware, componentes electrónicos u otros componentes para hacer el seguimiento de lo que hay que aprovisionar.`},timeline:{title:`Cronología de actividad`,empty:`Aún no hay actividad.`},template:{saveAsTemplate:`Guardar como plantilla`,noCreatePermission:`No tiene permiso para crear plantillas`},queue:{title:`Cola`,viewAll:`Ver todo`,printing:`{{count}} imprimiendo`,queued:`{{count}} en cola`},prints:{title:`Impresiones ({{count}})`},toast:{projectUpdated:`Proyecto actualizado`,partAdded:`Pieza añadida`,partRemoved:`Pieza eliminada`,exportFailed:`Error en la exportación`,projectExported:`Proyecto exportado`,templateCreated:`Plantilla creada`}},system:{title:`Información del sistema`,version:`Versión`,uptime:`Tiempo de actividad`,cpuUsage:`Uso de la CPU`,memoryUsage:`Uso de la memoria`,diskUsage:`Uso del disco`,networkInfo:`Información de la red`,logs:`Registros`,debugMode:`Modo de depuración`,enableDebug:`Activar el registro de depuración`,disableDebug:`Desactivar el registro de depuración`,downloadLogs:`Descargar registros`,clearLogs:`Borrar registros`,dockerInfo:`Información de Docker`,containerName:`Nombre del contenedor`,imageName:`Nombre de la imagen`,platform:`Plataforma`,architecture:`Arquitectura`},sponsors:{sectionTitle:`Independiente y financiado por la comunidad`,tagline:`Bambuddy es gratuito y seguirá siéndolo porque hay quien decide apoyarlo. Sin VC, sin dependencia de la nube.`,viewSupporters:`Ver patrocinadores`,toastPrints:`Has completado {{count}} impresiones con Bambuddy. Bambuddy sigue siendo gratuito gracias a quienes lo apoyan.`,toastCost:`Has rastreado {{total}} de filamento con Bambuddy. Mira quién mantiene el proyecto independiente.`,toastArchives:`{{count}} impresiones archivadas con Bambuddy. Mira quién lo mantiene independiente.`,toastAnniversary:`¡Un año con Bambuddy! Mira quién mantiene el proyecto independiente.`,toastVersionUpdate:`Actualizado a v{{version}}. Bambuddy sigue siendo gratuito gracias a quienes lo apoyan.`,toastBusiness:`¿Usas Bambuddy en {{count}} impresoras? Existe un plan de soporte para equipos: correcciones prioritarias, facturación y contacto directo con el responsable del proyecto.`,businessCta:`Bambuddy para empresas`,businessTitle:`Bambuddy para empresas`,businessTagline:`Estás gestionando {{count}} impresoras. Hay soporte prioritario, licencias comerciales y facturación disponibles para equipos y granjas de impresión.`},library:{title:`Biblioteca de filamentos`,addFilament:`Añadir filamento`,editFilament:`Editar filamento`,deleteFilament:`Eliminar filamento`,vendor:`Proveedor`,material:`Material`,color:`Color`,kFactor:`Factor K`,temperature:`Temperatura`,noFilaments:`No hay filamentos en la biblioteca`,deleteConfirm:`¿Está seguro de que desea eliminar este filamento?`,importFromPrinter:`Importar desde la impresora`,exportToFile:`Exportar a un archivo`,runWithPipeline:{actionLabel:`Ejecutar con pipeline`,noPermission:`No tienes permiso para ejecutar pipelines`,modalTitle:`Ejecutar con pipeline`,confirmTitle:`Confirmar ejecución`,confirmIntro:`El pre-vuelo encontró problemas con esta ejecución`,sourceHint:`Origen`,pipelineHint:`Pipeline`,targetHint:`Destino`,pipelineListAria:`Pipelines disponibles`,runAnyway:`Ejecutar de todos modos`,loading:`Cargando…`,empty:`Aún no hay pipelines guardadas. Abre el diálogo Cortar y haz clic en "Guardar como pipeline" para crear una.`,noTarget:`Sin impresora de destino`,noTargetMessage:`Esta pipeline no tiene impresora de destino. Ábrela en Ajustes para elegir una.`,copies:`Copias`,copiesHint:`máx {{n}}`,classTarget:`Cualquier {{model}}`,toast:{started:`Ejecución de pipeline iniciada`,failed:`No se pudo iniciar la ejecución`},issue:{printerNotSet:`Sin impresora de destino en esta pipeline.`,printerNotFound:`La impresora de destino ya no existe.`,printerDisabled:`La impresora de destino está deshabilitada.`,printerOffline:`La impresora de destino está desconectada.`,filamentType:`Slot de filamento {{slot}}: esperado {{expected}}, AMS tiene {{actual}}`,filamentColor:`Slot de filamento {{slot}}: color distinto (esperado {{expected}}, AMS tiene {{actual}})`,amsSlotMissing:`Slot AMS {{slot}} no disponible en esta impresora`,filamentUnverified:`Slot de filamento {{slot}} proviene de un preset de nube / estándar y no se pudo verificar estáticamente.`,noClassMatches:`Ninguna impresora en esta instalación coincide con la clase de modelo objetivo de la pipeline ({{expected}}).`,classNotSet:`El destino de la pipeline es una clase de impresora pero no se eligió ningún modelo.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Se muestran los valores predeterminados del laminador: tu sidecar es más antiguo que esta función y no puede informar los valores de un perfil. Actualiza la imagen del sidecar para verlos. Todo lo que no cambies seguirá usando el perfil.`,presetValuesNotConfigured:`Se muestran los valores predeterminados del laminador: no hay ningún sidecar configurado, así que no se pueden leer los valores de un perfil. Todo lo que no cambies seguirá usando el perfil.`,presetValuesSidecarUnavailable:`Se muestran los valores predeterminados del laminador: el sidecar no respondió, así que no se pueden leer los valores de un perfil. Todo lo que no cambies seguirá usando el perfil.`,presetValuesUnavailable:`Se muestran los valores predeterminados del laminador: no se pudieron leer los del perfil seleccionado. Todo lo que no cambies seguirá usando el perfil.`,filamentDefault:`Predeterminado`,fromFile:`del archivo`,fromFileHint:`El diseñador cambió esto en el archivo de origen. Su valor es {{value}}.`,fromFilePrinterCoupled:`impresora del diseñador`,fromFilePrinterCoupledHint:`Ajustado para la impresora para la que se diseñó este archivo: en la tuya puede ser incorrecto o estar fuera de rango.`,fromFileOverridesPreset:`anula el perfil`,fromFileOverridesPresetHint:`El archivo lo fija en {{value}} mientras que el perfil elegido usa {{preset}}. Actívalo solo si debe mandar el archivo.`,useFromFile:`Usar el valor del archivo de origen para {{option}}`,otherFromFile:`Otros ajustes de este archivo`,fromFileSummary:`El diseñador cambió {{count}} ajustes de proceso en este archivo. Solo se usan los que marques.`,fromFileUseAll:`Usar los ajustes del diseñador`,fromFileUseAllHint:`Marca los ajustes que se trasladan a otras impresoras. Los ajustados a la impresora del diseñador, y los que definen el perfil que elegiste, quedan sin marcar.`,fromFileClear:`Borrar {{count}}`,loading:`Cargando ajustes del laminador…`,mode:{simple:`Simple`,advanced:`Avanzado`,expert:`Experto`},searchPlaceholder:`Buscar ajustes`,resetAll:`Restablecer {{count}}`,resetOption:`Restablecer al valor predeterminado`,noMatches:`Ningún ajuste coincide con esta búsqueda.`},slice:{filamentSlotUnset:`sin definir`,processSettingsEmbedded:`No se usa mientras «Usar los ajustes integrados del archivo» está activo: los ajustes del propio archivo rigen este corte.`,processSettingsInactive:`Inactivo`,presetsHidden:`{{count}} ocultos`,showAllPresets:`Mostrar todos`,showFewerPresets:`Mostrar menos`,processSettings:`Ajustes de proceso`,processSettingsHint:`Ajusta el perfil seleccionado para este corte. Todo lo que no toques se mantiene como lo define el perfil.`,processSettingsChanged:`{{count}} cambiados`,processSettingsUnchanged:`Valores del perfil`,title:`Laminar modelo`,action:`Laminar`,actionAll:`Laminar las {{count}} bandejas`,actionAllTitle:`Laminar todas las bandejas en una salida única de varias bandejas (un solo archivo). La selección de filamento cubre cada hueco que defina el proyecto.`,allPlatesToggle:`Laminar las {{count}} bandejas`,slicing:`Laminando…`,printer:`Perfil de impresora`,process:`Perfil de proceso`,filament:`Perfil de filamento`,filamentSlot:`Filamento {{index}} ({{type}})`,filamentColour:`Color del filamento`,selectPreset:`— Seleccione un preajuste —`,loadingPresets:`Cargando preajustes…`,analyzingPlateFilaments:`Analizando los filamentos de la cama…`,analyzingPlateFilamentsHint:`Ejecutando un laminado de vista previa para descubrir qué ranuras del AMS usa esta cama. Después se almacena en caché — volver a abrir es instantáneo.`,previewToast:`Analizando {{name}} — {{elapsed}}`,previewWithProgress:`Analizando {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— no usado por esta cama`,noPresetsForSlot:`No hay preajustes disponibles`,otherPrinters:`Otras impresoras`,presetsLoadFailed:`Error al cargar los preajustes. Abra Ajustes → Perfiles para importarlos primero.`,refreshPresets:`Actualizar`,refreshPresetsTitle:`Actualizar preajustes — recuperar los listados más recientes de la nube y los paquetes (úselo tras eliminar un preajuste en Bambu Studio o Bambu Handy)`,allPresetsRequired:`Deben seleccionarse todos los preajustes`,useEmbedded:`Usar la configuración incorporada del archivo`,useEmbeddedHint:`Laminar tal como lo configuró el diseñador (perímetros, relleno, filamento) en lugar de los perfiles de arriba. Disponible porque tu impresora coincide con la del archivo.`,autoOrient:`Orientar los objetos automáticamente`,autoOrientHint:`El laminador gira cada objeto hacia su mejor cara de impresión antes de laminar. Sustituye la orientación del archivo.`,autoArrange:`Organizar automáticamente en la base`,autoArrangeHint:`El laminador coloca los objetos para que dejen de solaparse. Sustituye la disposición del archivo.`,enqueuing:`Enviando el trabajo de laminado…`,queued:`En cola…`,failed:`Error al laminar. Consulte los registros del contenedor auxiliar del laminador.`,startedToast:`Laminando {{name}} en segundo plano…`,queuedToast:`En cola: {{name}} — {{elapsed}}`,runningToast:`Laminando {{name}} — {{elapsed}}`,runningWithProgress:`{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,runningWithProgressMultiPlate:`Bandeja {{plateIndex}} de {{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,completedToast:`{{name}} laminado`,externalWriteFallbackToast:`Guardado en la biblioteca interna: no se pudo escribir en la carpeta externa`,failedTitle:`Error al laminar`,failedToast:`Error al laminar {{name}}: {{detail}}`,tier:{local:`Importado`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Estándar`},cloud:{notAuthenticated:`Inicie sesión en Bambu Cloud (Ajustes → Perfiles → Bambu Cloud) para ver sus preajustes de la nube.`,expired:`La sesión de Bambu Cloud ha caducado — inicie sesión de nuevo para actualizar sus preajustes de la nube.`,unreachable:`Bambu Cloud no es accesible en este momento. Los preajustes locales y estándar siguen funcionando.`},orcaCloud:{notAuthenticated:`Inicia sesión en Orca Cloud (Perfiles → Orca Cloud) para ver tus preajustes Orca.`,expired:`Sesión de Orca Cloud caducada — inicia sesión de nuevo para actualizar tus preajustes Orca.`,unreachable:`Orca Cloud no está disponible ahora. Otros preajustes siguen funcionando.`},bedType:{label:`Cama de impresión`,auto:`Automático (usar el preajuste de proceso)`,coolPlate:`Cool Plate`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`},pipelines:{label:`Pipeline`,applyAria:`Aplicar pipeline`,applyPrompt:`Aplicar pipeline…`,empty:`Sin pipelines guardadas`,saveButton:`Guardar como pipeline`,saveTitle:`Guardar la selección actual de los cuatro ajustes como pipeline reutilizable`,namePlaceholder:`Nombre de la pipeline`,nameAria:`Nuevo nombre de pipeline`,toast:{applied:`"{{name}}" aplicada`,saved:`Pipeline guardada`,saveFailed:`Error al guardar`}}},spoolman:{title:`Integración con Spoolman`,enabled:`Spoolman activado`,url:`URL de Spoolman`,connected:`Conectado`,disconnected:`No conectado`,testConnection:`Probar conexión`,sync:`Sincronizar`,syncing:`Sincronizando...`,lastSync:`Última sincronización`,linkToSpoolman:`Vincular a Spoolman`,openInSpoolman:`Abrir en Spoolman`,unlinkSpool:`Desvincular bobina`,unlinkConfirmTitle:`¿Desasignar la bobina?`,unlinkConfirmMessage:`Esto quitará la bobina de esta ranura. Los datos de la bobina en sí permanecerán sin cambios.`,selectSpool:`Seleccionar bobina`,noUnlinkedSpools:`No hay bobinas sin asignar disponibles`,linkSuccess:`Bobina asignada correctamente`,linkFailed:`Error al asignar la bobina`,unlinkSuccess:`Bobina desasignada correctamente`,unlinkFailed:`Error al desasignar la bobina`,linkedSpool:`Bobina asignada`,spoolId:`ID de la bobina`,fillSourceLabel:`(Spoolman)`,weight:`Peso`,remaining:`Restante`,disableWeightSync:`Desactivar la sincronización del peso estimado del AMS`,disableWeightSyncDesc:`No actualizar la capacidad restante a partir de las estimaciones del AMS. Use esto si prefiere el seguimiento del uso de Spoolman a las estimaciones del AMS basadas en porcentajes. Las bobinas nuevas seguirán usando la estimación del AMS como su peso inicial.`,reportPartialUsage:`Informar del uso parcial en las impresiones fallidas`,reportPartialUsageDesc:`Cuando una impresión falla o se cancela, informar del filamento estimado usado hasta ese punto según el progreso de las capas.`},locations:{title:`Ubicaciones de almacenamiento`,subtitle:`Gestione estantes, cajones y otros lugares físicos para sus bobinas`,add:`Añadir ubicación`,addShort:`Añadir`,edit:`Editar ubicación`,name:`Nombre`,spools:`Bobinas`,sensors:`Sensores`,empty:`Aún no hay ubicaciones de almacenamiento. Cree su primer estante o cajón.`,manage:`Ubicaciones`,createPlaceholder:`p. ej. Estante A, Cajón 1`,nameRequired:`El nombre de la ubicación es obligatorio`,created:`Ubicación creada`,updated:`Ubicación actualizada`,deleted:`Ubicación eliminada`,saveFailed:`No se pudo guardar la ubicación`,deleteFailed:`No se pudo eliminar la ubicación`,deleteBlocked:`Retire todas las bobinas de esta ubicación antes de eliminarla`,confirmDelete:`¿Eliminar «{{name}}»?`,confirmDeleteMessage:`Esta ubicación se eliminará del catálogo. Mueva las bobinas primero.`,confirmDeleteMessageWithSensors:`Esta ubicación se eliminará del catálogo. Mueva las bobinas primero. Los sensores conectados también se eliminarán.`},inventory:{title:`Inventario de bobinas`,subtitle:`Gestione sus bobinas`,addToInventory:`Añadir al inventario`,addToInventoryPending:`Añadiendo...`,addToInventorySuccess:`Bobina añadida al inventario`,addToInventoryFailed:`No se pudo añadir la bobina al inventario`,unknownSpoolTitle:`Nuevo filamento detectado`,unknownSpoolMessage:`Se ha detectado una bobina con una etiqueta RFID desconocida en {{location}}. ¿Añadirla a su inventario ahora?`,unknownSpoolSlot:`Ranura`,bulk:{selectAllVisible:`Seleccionar todo lo visible`,selectRow:`Seleccionar fila`,selectGroup:`Seleccionar grupo`,selectionCount:`{{count}} seleccionadas`,edit:`Editar`,printLabels:`Imprimir etiquetas`,resetUsage:`Restablecer uso`,restore:`Restaurar`,archive:`Archivar`,delete:`Eliminar`,clearSelection:`Limpiar selección`,editTitle:`Edición masiva de bobinas`,editSubtitle:`Se aplica a {{count}} bobinas seleccionadas. Solo se actualizan los campos marcados.`,editHint:`Escriba en un campo para marcarlo para actualización — solo se envían las filas marcadas. Los campos vacíos no cambian las bobinas (vaciar campos solo se hace por bobina).`,useCustom:`Usar "{{value}}"`,toggleField:`Activar la actualización de este campo`,changeCount:`Se actualizarán {{count}} campos.`,applyPending:`Aplicando...`,applyButton:`Aplicar a {{count}} bobinas`,deleteTitle:`Eliminar bobinas seleccionadas`,archiveTitle:`Archivar bobinas seleccionadas`,restoreTitle:`Restaurar bobinas seleccionadas`,resetUsageTitle:`Restablecer uso de bobinas seleccionadas`,deleteMessage:`¿Eliminar permanentemente {{count}} bobinas? Esto no se puede deshacer.`,archiveMessage:`¿Archivar {{count}} bobinas? Se pueden restaurar más tarde.`,restoreMessage:`¿Restaurar {{count}} bobinas archivadas?`,resetUsageMessage:`¿Restablecer el contador "Total consumido" en {{count}} bobinas? El peso restante se conserva.`,updateSuccess:`{{count}} bobinas actualizadas`,updateFailed:`Actualización masiva fallida`,updatePartial:`{{ok}} bobinas actualizadas, {{failed}} fallidas`,updateAllFailed:`Las {{count}} actualizaciones fallaron — la selección se mantiene para reintentar`,deleteSuccess:`{{count}} bobinas eliminadas`,deleteFailed:`Eliminación masiva fallida`,deletePartial:`{{ok}} bobinas eliminadas, {{failed}} fallidas`,deleteAllFailed:`Las {{count}} eliminaciones fallaron — la selección se mantiene para reintentar`,archiveSuccess:`{{count}} bobinas archivadas`,archiveFailed:`Archivado masivo fallido`,archivePartial:`{{ok}} bobinas archivadas, {{failed}} fallidas`,archiveAllFailed:`Los {{count}} archivados fallaron — la selección se mantiene para reintentar`,restoreSuccess:`{{count}} bobinas restauradas`,restoreFailed:`Restauración masiva fallida`,restorePartial:`{{ok}} bobinas restauradas, {{failed}} fallidas`,restoreAllFailed:`Las {{count}} restauraciones fallaron — la selección se mantiene para reintentar`,invalidHex:`Introduzca 6 caracteres hex (RRGGBB) u 8 (RRGGBBAA). De lo contrario el campo no se aplicará.`},spoolmanMixedContentTitle:`Spoolman no se puede cargar por HTTPS — contenido mixto bloqueado por su navegador`,spoolmanMixedContentBody:`Bambuddy se sirve por HTTPS (mediante su proxy inverso), pero su URL de Spoolman sigue siendo HTTP sin cifrar. Los navegadores bloquean el contenido mixto por seguridad, por lo que la interfaz integrada de Spoolman no se puede mostrar. Spoolman debe ser accesible por HTTPS para que esto funcione.`,spoolmanMixedContentFixReverseProxy:`Ponga Spoolman tras el mismo proxy inverso que Bambuddy (Traefik / Nginx / Caddy) con HTTPS y luego actualice la URL de Spoolman en Ajustes a la nueva dirección HTTPS.`,spoolmanMixedContentFixOpenNewTab:`Como solución alternativa, abra Spoolman en una pestaña nueva del navegador por HTTP — las reglas de contenido mixto solo se aplican a los marcos integrados, por lo que una pestaña independiente sí funciona.`,spoolmanOpenInNewTab:`Abrir Spoolman en una pestaña nueva`,labels:{title:`Imprimir etiquetas de bobinas`,selectedCount:`{{count}} seleccionadas`,pickSpools:`Elija para qué bobinas imprimir etiquetas:`,monochrome:`Monocromo (impresora en blanco y negro)`,monochromeHint:`Elimina la muestra de color y amplía el texto`,startingPosition:`Posición inicial de la etiqueta`,startingPositionRange:`Solo plantillas de hoja: L7160 admite 1–21; 5160 admite 1–30.`,startingPositionInvalid:`Introduce un número entero del 1 al {{capacity}}.`,startingPositionFirst:`La impresión comienza en la posición 1.`,startingPositionSkipped:`Las posiciones 1 a {{lastPosition}} quedarán vacías en la primera hoja.`,startingPositionRangeError:`La posición inicial debe estar entre 1 y {{capacity}} para esta hoja.`,searchPlaceholder:`Buscar nombre, marca o n.º de ID`,filterByMaterial:`Material:`,allMaterials:`Todos`,selectVisible:`Seleccionar todas las visibles ({{count}})`,deselectVisible:`Deseleccionar las visibles`,clearAll:`Borrar todo`,noSpoolsToShow:`No hay bobinas que mostrar. Ajuste su filtro e inténtelo de nuevo.`,noMatches:`Ninguna bobina coincide con la búsqueda o el filtro actuales.`,printOne:`Imprimir etiqueta para esta bobina`,printLabels:`Imprimir etiquetas…`,bulkTitle:`Elija las bobinas para las que imprimir etiquetas de las {{count}} mostradas actualmente`,noSpoolsTitle:`No hay bobinas que etiquetar`,error:`No se pudieron generar las etiquetas: {{msg}}`,sortBy:{label:`Ordenar:`,id:`Por ID`,color:`Por color`},templates:{amsHolderSmall:{label:`Soporte de AMS — pequeño (74 × 33 mm)`,hint:`Una etiqueta por página; coincide con la etiqueta imprimible del modelo 752566 de MakerWorld (AMS Filament Label Holder).`},amsHolderLarge:{label:`Soporte de AMS — grande (75 × 55 mm)`,hint:`Una etiqueta por página; encaja en la variante con inserto de cartulina del AMS Filament Label Holder. Lo bastante amplia para muestra de color, marca, material, ID y código QR.`},box40x30:{label:`Etiqueta de caja (40 × 30 mm)`,hint:`Una etiqueta por página; tamaño de rollo DK/Brother habitual, adecuado para etiquetas de bolsas de filamento y cajas de almacenamiento.`},box:{label:`Box label (62 × 29 mm)`,hint:`Una etiqueta por página; dimensionada para las etiquetas pequeñas de Brother PT/QL y Dymo.`},averyL7160:{label:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,hint:`Hojas de tamaño UE; 21 etiquetas por página A4.`},avery5160:{label:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,hint:`Hojas de tamaño EE. UU.; 30 etiquetas por página Letter.`}}},csv:{importButton:`Importar CSV`,exportButton:`Exportar CSV`,modalTitle:`Importar bobinas desde CSV`,selectFile:`Elige un archivo CSV o arrástralo aquí`,dragHint:`Encabezado: material (obligatorio), brand, subtype, color_name, rgba, …`,parsing:`Leyendo archivo…`,previewError:`No se pudo leer el archivo CSV`,validCount:`{{count}} válidas`,errorCount:`{{count}} con error`,skippedCount:`{{count}} omitidas`,colRow:`Fila`,colStatus:`Estado`,colColor:`Color`,colorResolved:`Color rellenado desde el catálogo`,colorCrossMaterial:`Color tomado de un material diferente — sin coincidencia exacta en el catálogo`,duplicateExisting:`Ya existe una bobina con este material, marca y color — se importará igualmente como una bobina nueva`,spoolmanHint:`En modo Spoolman, usa la importación/exportación CSV integrada de Spoolman.`,importValidRows:`Importar {{count}} filas válidas`,noValidRows:`Sin filas válidas`,importing:`Importando…`,importSuccess:`{{count}} bobinas importadas`,importError:`Error al importar`,exportError:`Error al exportar`},addSpool:`Añadir bobina`,editSpool:`Editar bobina`,copySpool:`Copiar bobina`,material:`Material`,selectMaterial:`Seleccionar material...`,subtype:`Subtipo`,brand:`Marca`,searchBrand:`Buscar marca...`,useCustomBrand:`Usar "{{brand}}"`,useCustomMaterial:`Usar material personalizado: {{material}}`,suggestedOptions:`Sugeridos`,allOptions:`Todos`,colorName:`Nombre del color`,colorNamePlaceholder:`Blanco jade, Rojo fuego...`,color:`Color`,hexColor:`Color hexadecimal`,pickColor:`Elegir color personalizado`,labelWeight:`Peso de la etiqueta`,coreWeight:`Peso de la bobina vacía`,searchSpoolWeight:`Buscar peso de la bobina...`,weightUsed:`Usado`,currentWeight:`Peso restante`,measuredWeight:`Peso medido`,spoolName:`Bobina`,costPerKg:`Coste por kg`,storageLocation:`Ubicación de almacenamiento`,temperature:`Temperatura`,humidity:`Humedad`,battery:`Batería`,storageLocationPlaceholder:`p. ej. Estante A, Cajón 1`,openInInventory:`Abrir en el inventario`,measuredWeightError:`El peso medido debe estar entre {{min}} g y {{max}} g.`,slicerFilament:`Filamento del laminador`,slicerFilamentName:`Nombre del preajuste del laminador`,slicerPreset:`Preajuste del laminador`,searchPresets:`Buscar preajustes de filamento...`,selectedPreset:`Seleccionado`,noPresetsFound:`No se encontraron preajustes`,tempOverrides:`Anulaciones de temperatura`,note:`Nota`,notePlaceholder:`Cualquier nota adicional sobre esta bobina...`,category:`Categoría`,categoryPlaceholder:`p. ej. Producción, Prototipo, Cliente A`,categoryNone:`Sin categoría`,storageLocationNone:`Sin ubicación establecida`,lowStockThresholdOverride:`Umbral de existencias bajas (esta bobina)`,lowStockThresholdOverrideHelp:`Déjelo en blanco para usar el umbral global ({{global}}%).`,clearRfid:`Borrar etiqueta RFID`,rfidCleared:`Etiqueta RFID borrada`,archive:`Archivar`,restore:`Restaurar`,noSpools:`Aún no hay bobinas. Añada su primera bobina para empezar.`,noAvailableSpools:`No hay bobinas disponibles. Añada una bobina a su inventario o desasigne una de otra ranura primero.`,kProfiles:`Perfiles K`,addKProfile:`Añadir perfil K`,assignSpool:`Asignar bobina`,unassignSpool:`Desasignar`,assignSuccess:`Bobina asignada y ranura del AMS configurada`,assignPendingInsert:`Asignada. La ranura se configurará cuando inserte la bobina.`,assignFailed:`Error al asignar la bobina`,selectSpool:`Seleccione una bobina para asignar a esta ranura`,assigned:`Asignada`,assigning:`Asignando...`,searchSpools:`Buscar bobinas...`,showAllSpools:`Mostrar todas las bobinas`,spoolmanSpools:`Bobinas de Spoolman`,allMaterials:`Todos los materiales`,filterByBrand:`Filtrar por marca...`,showArchived:`Mostrar archivadas`,quickAdd:`Añadir rápido (existencias)`,quantity:`Cantidad`,stock:`Existencias`,configured:`Configurada`,spoolsCreated:`{{count}} bobinas creadas`,spoolsPartiallyCreated:`{{created}} de {{total}} bobinas creadas (algunas fallaron)`,spoolCreated:`Bobina creada`,spoolUpdated:`Bobina actualizada`,spoolDeleted:`Bobina eliminada`,deepLinkSpoolNotFound:`Bobina no encontrada`,deepLinkFetchFailed:`No se pudo cargar la bobina — inténtelo de nuevo`,spoolArchived:`Bobina archivada`,spoolRestored:`Bobina restaurada`,kProfileSaveFailed:`No se pudieron guardar los ajustes del perfil K`,syncWeightSpoolNotFound:`Bobina no encontrada — es posible que se haya eliminado`,syncWeightSpoolmanUnreachable:`Spoolman no es accesible — inténtelo más tarde`,syncWeightFailed:`Error al sincronizar el peso`,spoolmanUnreachable:`Spoolman no es accesible — inténtelo de nuevo más tarde`,deleteSpoolNotFound:`Bobina no encontrada — es posible que ya se haya eliminado`,deleteFailed:`Error al eliminar la bobina`,archiveSpoolNotFound:`Bobina no encontrada — es posible que ya se haya eliminado`,archiveFailed:`Error al archivar la bobina`,restoreSpoolNotFound:`Bobina no encontrada — es posible que ya se haya eliminado`,restoreFailed:`Error al restaurar la bobina`,saveFailed:`Error al guardar los cambios`,tagClearFailed:`Error al borrar la etiqueta`,deleteConfirm:`¿Está seguro de que desea eliminar esta bobina? Esto no se puede deshacer.`,archiveConfirm:`¿Está seguro de que desea archivar esta bobina?`,advancedSettings:`Ajustes avanzados`,filamentInfoTab:`Información del filamento`,paProfileTab:`Perfil PA`,colorAndCostTab:`Color y coste`,printersTab:`Impresoras`,filamentInfo:`Filamento`,additional:`Adicional`,loadingPresets:`Cargando preajustes de la nube...`,cloudConnected:`Nube conectada`,cloudNotConnected:`Nube no conectada (usando los valores predeterminados)`,recentColors:`Recientes`,searchColors:`Buscar colores...`,searchResults:`Resultados de búsqueda`,allColors:`Todos los colores`,commonColors:`Colores comunes`,showLess:`Mostrar menos`,showAll:`Mostrar todos`,noColorsFound:`Ningún color coincide con su búsqueda`,noResults:`No se encontraron coincidencias`,extraColorsLabel:`Colores adicionales`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Pegue de 2 a 8 paradas hexadecimales, separadas por comas. Se muestra como un degradado.`,extraColorsInvalid:`Se ignoró el hexadecimal no válido: {{tokens}}`,colorEffectLabel:`Efecto`,colorEffect:{none:`Ninguno`,sparkle:`Destellos`,wood:`Madera`,marble:`Mármol`,glow:`Brillante en la oscuridad`,matte:`Mate`,silk:`Seda`,galaxy:`Galaxia`,rainbow:`Arcoíris`,metal:`Metal`,translucent:`Translúcido`,gradient:`Degradado`,dualColor:`Bicolor`,triColor:`Tricolor`,multicolor:`Multicolor`},selectMaterialFirst:`Seleccione primero un material en la pestaña de información del filamento.`,noPrintersConfigured:`No hay impresoras configuradas. Añada impresoras para usar perfiles PA.`,matchingFilter:`Coincidentes`,anyBrand:`Cualquier marca`,anyVariant:`Cualquier variante`,autoSelect:`Selección automática`,matches:`coincidencias`,match:`coincidencia`,noMatches:`Sin coincidencias`,connected:`Conectada`,offline:`Desconectada`,printerOffline:`La impresora está desconectada. Conéctela para ver los perfiles de calibración.`,noKProfilesMatch:`Ningún perfil K coincide con el filamento seleccionado.`,leftNozzle:`Boquilla izquierda`,rightNozzle:`Boquilla derecha`,profilesSelected:`perfil(es) de calibración seleccionado(s)`,filamentPreset:`Perfil de filamento`,presetUseSpoolDefault:`Usar el perfil de la bobina`,presetInherited:`heredado`,presetOverride:`personalizado`,presetNeedsModel:`Esta impresora aún no ha indicado su modelo, así que no puede tener su propio perfil.`,autoMatchPresets:`Asignar automáticamente`,autoMatchPresetsHint:`Buscar la variante del perfil de la bobina que nombra cada modelo`,kProfilesPerPrinter:`Perfiles K`,kProfileNotSet:`Sin definir`,kProfileFlowMismatch:`Este perfil se midió con una boquilla {{profile}} pero hay montada una {{fitted}}, así que no se aplicará`,nozzle:`Boquilla`,unknownModel:`Modelo desconocido`,onePrinter:`1 impresora`,nPrinters:`{{n}} impresoras`,filamentPresetsLoadFailed:`No se pudieron cargar los perfiles por modelo de esta bobina`,filamentPresetSaveFailed:`No se pudieron guardar los perfiles por modelo`,totalInventory:`Inventario total`,totalConsumed:`Total consumido`,byMaterial:`Por material`,inPrinter:`En la impresora`,lowStock:`Existencias bajas`,sinceTracking:`Desde que comenzó el seguimiento`,resetConsumedCounter:`Restablecer contador`,resetConsumedCounterTooltip:`Poner a cero el contador de gramos consumidos de esta bobina. El peso restante no cambia.`,resetConsumedCounterConfirm:`¿Restablecer a 0 el contador de gramos consumidos de esta bobina? Las impresiones futuras volverán a contar desde cero. La bobina en sí, su cálculo de peso restante y sus ajustes no cambian.`,resetAllConsumedCounters:`Restablecer todos los contadores`,resetAllConsumedCountersTooltip:`Poner a cero el contador de gramos consumidos de todas las bobinas. Los pesos restantes no cambian.`,resetAllConsumedCountersConfirm:`¿Restablecer a 0 el contador de gramos consumidos de las {{count}} bobinas (incluidas las archivadas)? Esto borra la estadística «Total consumido» para que las impresiones futuras cuenten desde cero. Las bobinas y los pesos restantes no cambian.`,consumedCounterReset:`Contador restablecido`,allConsumedCountersReset:`Contador restablecido para {{count}} bobina(s)`,resetConsumedCounterFailed:`Error al restablecer el contador`,loadedInAms:`Cargada en AMS/ext.`,remaining:`Restante`,weightCheck:`Comprobación de peso`,lastWeighed:`Pesada por última vez`,neverWeighed:`Nunca pesada`,search:`Buscar bobinas...`,showing:`Mostrando`,to:`a`,of:`de`,show:`Mostrar`,spools:`bobinas`,spool:`bobina`,page:`Página`,noSpoolsMatch:`No se encontraron resultados`,noSpoolsMatchDesc:`Pruebe a ajustar su búsqueda o sus filtros para encontrar lo que busca.`,active:`Activas`,archived:`Archivadas`,all:`Todas`,used:`Usada`,new:`Nueva`,clearFilters:`Borrar filtros`,table:`Tabla`,cards:`Tarjetas`,net:`Neto`,groupSimilar:`Agrupar`,groupedSpools:`{{count}} bobinas idénticas`,groupedRows:`filas`,columns:`Columnas`,configureColumns:`Configurar columnas`,configureColumnsDesc:`Arrastre para reordenar las columnas o use las flechas. Conmute la visibilidad con el icono del ojo.`,visible:`visibles`,reset:`Restablecer`,cancel:`Cancelar`,applyChanges:`Aplicar cambios`,moveUp:`Subir`,moveDown:`Bajar`,hideColumn:`Ocultar columna`,showColumn:`Mostrar columna`,linkToSpool:`Vincular a bobina`,tagLinked:`Etiqueta vinculada a la bobina`,tagLinkFailed:`Error al vincular la etiqueta`,tagAlreadyLinked:`La etiqueta ya está vinculada a la bobina #{{id}}`,unknownTag:`Se detectó una etiqueta RFID desconocida`,usageHistory:`Historial de uso`,noUsageHistory:`Aún no se ha registrado ningún uso`,printName:`Nombre de la impresión`,weightConsumed:`Peso consumido`,clearHistory:`Borrar`,historyCleared:`Historial de uso borrado`,fillSourceLabel:`(Inv.)`,lowStockThresholdError:`El umbral debe estar entre 0,1 y 99,9`,assignMismatchTitle:`Discrepancia de material`,assignMismatchMessage:`El material de la bobina seleccionada "{{spoolMaterial}}" no coincide con el material de la bandeja "{{trayMaterial}}" de {{location}}. ¿Asignar de todos modos?`,assignMismatchConfirm:`Asignar de todos modos`,assignPartialMismatchMessage:`El material de la bobina "{{spoolMaterial}}" es similar pero no coincide exactamente con "{{trayMaterial}}" en {{location}}. ¿Desea continuar?`,assignProfileMismatchMessage:`El perfil de la bobina "{{spoolProfile}}" no coincide con el perfil de la bandeja "{{trayProfile}}" en {{location}}. ¿Desea continuar?`,assignReconfigureNote:`La ranura del AMS se reconfigurará para usar el perfil de la bobina.`,spoolmanFilamentCatalog:`Catálogo de filamentos de Spoolman`,pickFromSpoolmanCatalog:`Elegir del catálogo de Spoolman…`,spoolmanFilamentSelected:`Filamento seleccionado del catálogo de Spoolman`,spoolmanFilamentUnlinked:`Vínculo del catálogo de filamentos borrado`,noSpoolmanFilaments:`No se encontraron filamentos en el catálogo de Spoolman`,spoolmanFilamentColorSwatch:`Color del filamento`,spoolWeightManagedBySpoolman:`El peso de la bobina vacía se gestiona por tipo de filamento en Spoolman`,spoolmanCatalogLoadFailed:`Error al cargar el catálogo de filamentos de Spoolman`},timelapse:{title:`Time-lapse`,create:`Crear time-lapse`,download:`Descargar`,delete:`Eliminar`,preview:`Vista previa`,frameRate:`Velocidad de fotogramas`,quality:`Calidad`,processing:`Procesando...`,noTimelapses:`No hay time-lapses disponibles`},ams:{title:`AMS`,slot:`Ranura`,empty:`Vacía`,emptySlot:`Ranura vacía`,slotEmpty:`Vacía`,slotUnconfigured:`?`,emptySlotReset:`No hay filamento asignado`,unknown:`Desconocido`,humidity:`Humedad`,temperature:`Temperatura`,filamentType:`Tipo de filamento`,filamentColor:`Color`,remaining:`Restante`,history:`Historial del AMS`,noHistory:`No hay historial disponible`,configureSlot:`Configurar ranura`,externalSpool:`Bobina externa`,profile:`Perfil`,kFactor:`Factor K`,kFactorShort:`K`,fill:`Rellenar`,configure:`Configurar`,used:`usado`,remainingUnit:`restante`},printModal:{variants:{editNote:`Estas alternativas se fijaron al poner el trabajo en cola. Cancela y vuelve a encolar para cambiarlas.`,title:`Alternativas de impresora`,help:`Un trabajo, un puesto en la cola. La primera impresora compatible que quede libre imprime su archivo.`,unknownModel:`Modelo desconocido`,plateFor:`Placa para {{filename}}`,moveUp:`Subir`,moveDown:`Bajar`,queued:`En cola con {{count}} alternativas`},selectPrinter:`Seleccionar impresora`,selectPlate:`Seleccionar cama`,filamentMapping:`Mapeo de filamentos`,useArchiveMapping:`Mapeo`,useArchiveMappingTooltip:`Selecciona todas las ranuras a partir del mapeo de AMS guardado con este archivo (del slicer), en lugar de emparejar por tipo/color.`,clickToChangeSlot:`Haga clic para cambiar la asignación de ranura`,reRead:`Releer`,plateN:`Cama {{n}}`,plateFilamentsUnreadable:`No se han podido leer los filamentos de una cama seleccionada, por lo que no se puede asignar. Deselecciónala para encolar las demás.`,totalCost:`Coste total:`,slotRemainingShort:` - quedan {{grams}} g`,printSettings:`Ajustes de impresión`,bedLeveling:`Nivelación de la cama`,flowCalibration:`Calibración del flujo`,vibrationCalibration:`Calibración de vibración`,layerInspection:`Inspección de la primera capa`,timelapse:`Time-lapse`,cancel:`Cancelar`,noPrintersAvailable:`No hay impresoras disponibles`,printerBusy:`La impresora está ocupada`,printerOffline:`La impresora está desconectada`,sameTypeDifferentColor:`Mismo tipo, color distinto`,filamentTypeNotLoaded:`Tipo de filamento no cargado`,statusReady:`Listo`,statusColorMismatch:`Color distinto`,statusTypeNotFound:`Tipo no encontrado`,requiredTooltip:`Requerido: {{name}} - {{color}}`,manuallySelected:`Seleccionado manualmente`,autoMatched:`Emparejado automáticamente`,selectSlot:`Elegir ranura`,sameTypeDifferentColorDetail:`Mismo tipo, color distinto: necesita {{required}}, la ranura tiene {{loaded}}`,requiredTypeNotInPrinter:`El tipo de filamento requerido no se encuentra en la impresora.`,whenToPrint:`Cuándo imprimir`,asap:`Lo antes posible`,queue:`Cola`,schedule:`Programar`,dateTime:`Fecha y hora`,invalidDateTime:`Introduzca una fecha y hora válidas`,openCalendar:`Abrir calendario`,requireManualStart:`Requerir inicio manual`,requirePreviousSuccess:`Iniciar solo si la impresión anterior se completó correctamente`,autoOffAfter:`Apagar la impresora al terminar`,helpAsap:`La impresión se añadirá al principio de la cola y comenzará en cuanto haya una impresora elegible inactiva.`,helpSchedule:`La impresión comenzará a la hora programada si la impresora está inactiva. Si está ocupada, esperará hasta que esté disponible.`,helpQueue:`La impresión se añadirá al final de la cola.`,leftNozzle:`I`,rightNozzle:`D`,leftNozzleTooltip:`Boquilla izquierda`,rightNozzleTooltip:`Boquilla derecha`,ftsSameInletHint:`Todos los filamentos de esta impresión están en el conmutador de ruta de filamento IN-{{inlet}}. Cambiar entre filamentos de la misma entrada es más lento: mueve uno a un AMS de la otra entrada.`,rackPosition:`Posición del carro`,rackPositionTooltip:`Qué boquilla del carro imprime este filamento. Las posiciones se numeran como en la impresora.`,rackEmptyPosition:`Esta posición del carro está vacía`,rackWrongNozzle:`Tiene una boquilla {{has}}; este filamento necesita {{needs}}`,filamentOverride:`Anulación de filamento`,filamentOverrideHint:`Anule opcionalmente los filamentos para la asignación basada en el modelo. El planificador comparará con los filamentos que ha seleccionado en lugar de los valores originales del 3MF.`,originalFilament:`Original`,overrideWith:`Anular con`,resetToOriginal:`Restablecer al original`,insufficientFilamentTitle:`No hay suficiente filamento`,waitingForAmsStatus:`Esperando el estado del AMS de {{printer}}…`,insufficientFilamentMessage:`Algunas bobinas asignadas tienen menos filamento restante del que necesita esta impresión:`,insufficientFilamentLine:`{{printer}} - {{slot}}: necesita {{required}} g, restante {{remaining}} g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: necesita {{required}} g, {{remaining}} g disponibles entre bobinas equivalentes (AMS Filament Backup)`,printAnyway:`Imprimir de todos modos`,forceColorMatch:`Forzar la coincidencia de color`,staggerPrinterStarts:`Escalonar los inicios de las impresoras`,staggerGroupSize:`Tamaño de grupo`,staggerInterval:`Intervalo (min)`,staggerPreview:`{{printers}} impresoras → {{groups}} grupos de {{size}}, iniciando cada {{interval}} min`,staggerLastGroup:`último grupo: {{count}}`,staggerTotal:`total: {{minutes}} min`,staggerToPrinters:`Escalonar en {{count}} impresoras`,gcodeInjection:`Inyectar G-code de impresión automática`,insufficientBudget:`Presupuesto insuficiente`,unlimitedNoBudget:`Ilimitado: no se ha establecido ningún límite de presupuesto.`,noPrintableCostCenters:`No hay ningún centro de costes activo disponible para imprimir. Pide a un administrador que te conceda acceso de impresión.`},backup:{includesEncryptionKey:`Las copias de seguridad locales incluyen el archivo de clave de cifrado de MFA (DATA_DIR/.mfa_encryption_key) para que un ZIP de copia de seguridad sea autónomo. Trate el ZIP como información sensible — cualquiera que tenga el archivo puede descifrar los secretos de cliente de OIDC y los secretos TOTP que contiene.`,title:`Copia de seguridad y restauración`,createBackup:`Crear copia de seguridad`,restoreBackup:`Restaurar copia de seguridad`,restoreDescription:`Reemplazar todos los datos desde un archivo de copia de seguridad`,downloadBackup:`Descargar copia de seguridad`,uploadBackup:`Subir copia de seguridad`,lastBackup:`Última copia de seguridad`,autoBackup:`Copia de seguridad automática`,backupNow:`Hacer copia de seguridad ahora`,restoreWarning:`Advertencia: restaurar una copia de seguridad sobrescribirá todos los datos actuales.`,includeArchives:`Incluir archivos`,includeSettings:`Incluir ajustes`,includeProfiles:`Incluir perfiles`,backupSuccess:`Copia de seguridad creada correctamente`,restoreSuccess:`Copia de seguridad restaurada correctamente`,backupFailed:`Error en la copia de seguridad`,restoreFailed:`Error en la restauración`,restoreNote:`La impresora virtual se detendrá durante la restauración`,githubBackup:`Copia de seguridad en Git`,enabled:`Activada`,cloudLoginRequired:`Se requiere iniciar sesión en Bambu Cloud. Inicie sesión en Perfiles → Perfiles en la nube para activar la copia de seguridad en GitHub.`,cloudLoginRequiredShort:`Se requiere iniciar sesión en la nube`,githubDescription:`Sincronice automáticamente sus perfiles con un repositorio privado de GitHub para la copia de seguridad y el historial de versiones.`,repoIsPrivate:`El repositorio es privado — es seguro hacer copias de seguridad en él.`,repoIsPublicWarning:`El repositorio es PÚBLICO. Las copias de seguridad de Bambuddy incluyen credenciales de MQTT, tokens de Home Assistant, tokens de Prometheus, su correo de Bambu Cloud y los códigos de acceso de las impresoras mediante los perfiles K. El guardado está bloqueado hasta que haga el repositorio privado en los ajustes de su proveedor.`,repoVisibilityUnknown:`No se pudo determinar la visibilidad del repositorio. Bambuddy se niega a hacer copias de seguridad en cualquier cosa que no se confirme como privada; el guardado se bloqueará.`,repositoryUrl:`URL del repositorio`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Permitir HTTP no seguro`,allowInsecureHttpHint:`Actívelo para instancias autoalojadas en redes privadas sin TLS`,personalAccessToken:`Token de acceso personal`,tokenSaved:`(guardado)`,enterNewToken:`Introduzca un nuevo token para actualizar`,tokenHintGitHub:`Token de granularidad fina con acceso de lectura y escritura a Contents, o token clásico con el ámbito repo.`,tokenHintGitLab:`Token con el ámbito api, o read_repository junto con write_repository.`,tokenHintGitea:`Token con el ámbito write:repository.`,tokenHintForgejo:`Token con el ámbito write:repository. Basta con un token limitado a este único repositorio.`,branch:`Rama`,provider:`Proveedor de Git`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Solo manual`,hourly:`Cada hora`,daily:`Diaria`,weekly:`Semanal`,includeInBackup:`Incluir en la copia de seguridad`,kProfiles:`Perfiles K`,kProfilesDescription:`Calibración de avance de presión de las impresoras conectadas`,noPrintersConnected:`No hay impresoras conectadas`,printersConnected:`{{connected}}/{{total}} conectadas`,cloudProfiles:`Perfiles en la nube`,cloudProfilesDescription:`Preajustes de filamento, impresora y proceso de Bambu Cloud y Orca Cloud`,cloudProfilesAccounts:`Cuentas conectadas — Bambu Cloud: {{bambu}}, Orca Cloud: {{orca}}`,appSettings:`Ajustes de la aplicación`,appSettingsDescription:`Configuración de Bambuddy (base de datos completa)`,spoolInventory:`Inventario de bobinas`,spoolInventoryDescription:`Bobinas de filamento, historial de uso y seguimiento de costes`,printArchives:`Archivos de impresión`,printArchivesDescription:`Metadatos del historial de impresión (sin archivos gcode/3MF)`,lastBackupAt:`Última copia de seguridad:`,noBackupsYet:`Aún no hay copias de seguridad`,next:`Siguiente:`,startingBackup:`Iniciando la copia de seguridad...`,test:`Probar`,enableBackup:`Activar la copia de seguridad`,testConnection:`Probar conexión`,enterRepoUrl:`Introduzca la URL del repositorio`,enterRepoAndToken:`Introduzca la URL del repositorio y el token de acceso`,repoRequired:`La URL del repositorio es obligatoria`,tokenRequired:`El token de acceso es obligatorio`,githubBackupEnabled:`Copia de seguridad en GitHub activada`,tokenUpdated:`Token actualizado`,settingsSaved:`Ajustes guardados`,failedToSave:`Error al guardar: {{message}}`,backupCompleteFiles:`Copia de seguridad completada - {{count}} archivos actualizados`,backupSkippedNoChanges:`Copia de seguridad omitida - sin cambios`,backupFailed2:`Error en la copia de seguridad: {{message}}`,clearedLogs:`Se borraron {{count}} registros`,failedToClearLogs:`Error al borrar los registros: {{message}}`,restoreFromGit:{button:`Restaurar desde Git`,title:`Restaurar desde copia de Git`,subtitle:`Elige un commit y qué se debe restaurar`,commitLabel:`Commit de la copia`,latestCommit:`Última copia (punta de la rama)`,categoriesLabel:`Qué restaurar`,inspecting:`Leyendo el contenido de la copia...`,itemCount:`{{count}} en la copia`,overwriteLabel:`Sobrescribir entradas existentes`,overwriteOn:`Las entradas existentes se actualizarán desde la copia.`,overwriteOff:`Solo se añaden las entradas que falten; las existentes no se modifican.`,selectedCount:`{{count}} seleccionados`,restoring:`Restaurando...`,confirmTitle:`¿Restaurar desde la copia?`,confirmMessage:`Las categorías seleccionadas se restaurarán desde este commit. Se añaden las entradas que falten y las existentes se mantienen igual.`,confirmMessageOverwrite:`Las categorías seleccionadas se restaurarán desde este commit y se sobrescribirán las entradas que ya existan localmente. Esto no se puede deshacer.`,kprofilesOverwriteCaveat:`Los perfiles K son la excepción: escribir una ranura siempre reemplaza la calibración en la impresora.`,tally:`{{restored}} restaurados, {{skipped}} omitidos, {{failed}} fallidos`,reloadHint:`Recarga Bambuddy para que los datos restaurados aparezcan en todas partes.`,partialHint:`Las categorías indicadas arriba se completaron y están guardadas. Las que faltan no llegaron a ejecutarse.`,failed:`La restauración ha fallado.`,loadFailed:`No se pudo leer el repositorio de copias de seguridad.`,details:{notPresent:`No está presente en este commit de la copia`,unreadableJson:`JSON ilegible: {{paths}}`,settingsNoPayload:`No hay ajustes en los datos`,settingsCredentialsWillSkip:`Se omitirán {{count}} claves con aspecto de credencial`,settingsCompanionWillSkip:`Se omitirán {{count}} claves con aspecto de credencial y {{companion}} interruptores que dependen de ellas quedarán desactivados`,settingsCompanionOnlyWillSkip:`{{companion}} interruptores quedarán desactivados - la credencial que necesita cada uno no se puede restaurar desde una copia de seguridad`,spoolsUsageCount:`incluidos {{count}} registros de consumo`,archivesMetadataOnly:`Solo metadatos - los archivos 3MF y las miniaturas no están en una copia de Git`,kprofilesPrinterCount:`en {{count}} impresoras`},notes:{noData:`No hay datos de este tipo en esta copia de seguridad`,archivesPrinterMissing:`Algunos archivos hacían referencia a impresoras que ya no existen - enlace eliminado`,archivesProjectMissing:`Algunos archivos hacían referencia a proyectos que ya no existen - enlace eliminado`,archivesOwnerCleared:`Algunos archivos hacían referencia a usuarios que ya no existen - se ha borrado el propietario, por lo que solo son visibles para usuarios con el permiso archives:read_all hasta que un administrador los reasigne`,archivesOwnerUnmatched:`Algunos archivos indican un propietario que no existe en esta instancia - se ha borrado el propietario en lugar de deducirlo del id de usuario de la copia de seguridad, por lo que solo son visibles para usuarios con el permiso archives:read_all hasta que un administrador los reasigne`,archivesOwnerUnknown:`Algunos archivos se restauraron sin propietario - esta copia de seguridad no registra ninguno, por lo que solo son visibles para usuarios con el permiso archives:read_all hasta que un administrador los reasigne`,archivesUndeleted:`Los archivos eliminados desde la copia vuelven a estar visibles - la sobrescritura estaba activada`,archivesMetadataOnly:`Los archivos restaurados solo contienen metadatos - los ficheros 3MF y las miniaturas no están en una copia de Git`,spoolUsageUnresolved:`{{count}} registros de consumo omitidos - su bobina no está en la lista de bobinas de esta copia, así que no hay nada a lo que asociarlos.`,spoolUsageUnlinked:`{{count}} registros de consumo restaurados sin su enlace al historial de impresión - selecciona Archivos de impresión junto con Inventario de bobinas para conservarlo.`,spoolTagKept:`{{count}} etiquetas de bobina se han dejado como estaban - la copia habría borrado una etiqueta escaneada desde entonces, o la habría movido a una segunda bobina.`,settingsCredentialsSkipped:`{{count}} claves con aspecto de credencial omitidas - vuelve a introducir los secretos manualmente`,settingsAuthSkipped:`{{count}} ajustes de autenticación omitidos - cámbialos en Ajustes > Autenticación para que sigan aplicándose las comprobaciones de bloqueo`,settingsCompanionSkipped:`{{keys}} se han dejado desactivados - la credencial que cada uno necesita no puede restaurarse desde una copia y esta instancia no tiene ninguna guardada, así que activarlos dejaría la integración sin autenticación`,settingsMqttRelayFailed:`Ajustes MQTT restaurados, pero no se pudo reconectar el relé - reinicia Bambuddy`,kprofilesAlwaysOverwrite:`Los perfiles K siempre sobrescriben la ranura correspondiente en la impresora`,kprofilesAckUnreliable:`Una impresora que no responde sigue contando como restaurada - verifica los perfiles en la impresora`,kprofilesPrinterMissing:`No hay ninguna impresora con el número de serie {{serial}} - omitido`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) no está conectada - omitido`,kprofilesUnknownNozzle:`Diámetro de boquilla inesperado {{nozzle}} para {{serial}} - enviado tal cual`,kprofilesUnmatched:`{{count}} perfiles para {{nozzle}} no tenían equivalente en {{printer}} - añadidos como perfiles nuevos`,kprofilesSendFailed:`No se pudieron enviar los perfiles de {{nozzle}} a {{printer}} ({{serial}})`,kprofilesRefused:`{{printer}} ({{serial}}) rechazó los perfiles de {{nozzle}}: {{reason}}`,kprofilesStepFailed:`No se pudo completar el paso de los perfiles K - {{reason}}. Lo que se restauró antes sigue guardado.`}},history:`Historial`,clear:`Borrar`,date:`Fecha`,status:`Estado`,trigger:`Tipo`,triggers:{manual:`Copia (manual)`,scheduled:`Copia (programada)`,restore:`Restauración`},commit:`Confirmación`,localBackup:`Copia de seguridad local`,localBackupDescription:`Cree una copia de seguridad completa de sus datos de Bambuddy, incluida la base de datos, los archivos, las subidas y todos los archivos.`,downloadBackupLabel:`Descargar copia de seguridad`,completeBackupZip:`Copia de seguridad completa: base de datos + todos los archivos (ZIP)`,download:`Descargar`,preparingBackup:`Preparando la copia de seguridad...`,creatingArchive:`Creando el archivo de copia de seguridad... Esto puede tardar un rato para archivos grandes.`,downloadingFile:`Descargando el archivo de copia de seguridad...`,backupDownloaded:`Copia de seguridad descargada correctamente`,failedToCreateBackup:`Error al crear la copia de seguridad: {{message}}`,restore:`Restaurar`,restoreReplacesAll:`La restauración reemplaza todos los datos.`,restoreReplacesAllDetail:`Su base de datos y archivos actuales se reemplazarán por completo. Se requiere un reinicio tras la restauración.`,restoreConfirmTitle:`Restaurar copia de seguridad`,restoreConfirmMessage:`¿Está seguro de que desea restaurar desde "{{filename}}"? Esto reemplazará por completo su base de datos actual y todos los archivos. La aplicación deberá reiniciarse tras la restauración.`,restoreConfirmButton:`Restaurar copia de seguridad`,uploadingFile:`Subiendo el archivo de copia de seguridad...`,backupRestoredRestart:`Copia de seguridad restaurada. Reinicie Bambuddy.`,failedToRestore:`Error al restaurar la copia de seguridad. Compruebe el formato del archivo.`,reloadNow:`Recargar ahora`,creatingBackup:`Creando copia de seguridad`,restoringBackup:`Restaurando copia de seguridad`,preparing:`Preparando...`,processing:`Procesando...`,doNotClosePage:`No cierre esta página ni navegue a otra. Esta operación puede tardar varios minutos para copias de seguridad grandes.`,restoring:`Restaurando...`,restoreComplete:`Restauración completada`,restoreFailed2:`Error en la restauración`,importSettings:`Importar ajustes desde un archivo de copia de seguridad`,pleaseWaitRestoring:`Espere mientras se restauran sus datos`,selectBackupFile:`Haga clic para seleccionar el archivo de copia de seguridad (.json o .zip)`,duplicateHandling:`Cómo funciona la gestión de duplicados:`,matchPrinters:`Impresoras`,matchPrintersBy:`coincidencia por número de serie`,matchSmartPlugs:`Enchufes inteligentes`,matchSmartPlugsBy:`coincidencia por dirección IP`,matchNotificationProviders:`Proveedores de notificaciones`,matchNotificationProvidersBy:`coincidencia por nombre`,matchFilaments:`Filamentos`,matchFilamentsBy:`coincidencia por nombre + tipo + marca`,matchArchives:`Archivos`,matchArchivesBy:`coincidencia por hash del contenido (siempre se omiten)`,matchPendingUploads:`Subidas pendientes`,matchPendingUploadsBy:`coincidencia por nombre de archivo`,matchSettingsTemplates:`Ajustes y plantillas`,matchSettingsTemplatesBy:`siempre se sobrescriben`,replaceExisting:`Reemplazar los datos existentes`,keepExisting:`Conservar los datos existentes`,overwriteDescription:`Sobrescribir los elementos que ya existen con los datos de la copia de seguridad`,keepDescription:`Restaurar solo los elementos que aún no existen`,overwriteCaution:`Precaución:`,overwriteWarning:`Sobrescribir reemplazará sus configuraciones actuales con los datos de la copia de seguridad. Los códigos de acceso de las impresoras nunca se sobrescriben por seguridad.`,cancel:`Cancelar`,processingBackup:`Procesando el archivo de copia de seguridad...`,itemsRestored:`Elementos restaurados`,itemsSkipped:`Elementos omitidos`,restored:`Restaurados`,skippedAlreadyExist:`Omitidos (ya existen)`,filesCategory:`Archivos (3MF, miniaturas, etc.)`,andMore:`...y {{count}} más`,newApiKeysGenerated:`Nuevas claves API generadas`,keysShownOnce:`Estas claves solo se muestran una vez. ¡Cópielas ahora!`,copy:`Copiar`,noDataFound:`No se encontraron datos para restaurar en el archivo de copia de seguridad.`,close:`Cerrar`,scheduledBackup:`Copias de seguridad programadas`,scheduledBackupDescription:`Cree automáticamente instantáneas de copia de seguridad según una programación. El directorio de salida se puede montar en un NAS o en almacenamiento externo.`,frequency:`Frecuencia`,backupTime:`Hora`,retention:`Retención`,retentionDescription:`Número de copias de seguridad que conservar`,outputPath:`Ruta de salida`,outputPathPlaceholder:`Predeterminada: {{path}}`,outputPathDescription:`Déjelo vacío para la ubicación predeterminada`,runNow:`Ejecutar ahora`,backupFiles:`Archivos de copia de seguridad`,noScheduledBackups:`Aún no hay copias de seguridad`,deleteBackup:`Eliminar`,deleteBackupConfirm:`¿Eliminar este archivo de copia de seguridad?`,backupRunning:`Copia de seguridad en curso...`,scheduledBackupComplete:`Copia de seguridad completada correctamente`,scheduledBackupFailed:`Error en la copia de seguridad`,nextBackup:`Próxima copia de seguridad`,backupSize:`Tamaño`,localTimeHint:`Hora local ({{tz}})`,defaultPathLabel:`Predeterminada:`,pathCheck:{title:`Bambuddy no puede escribir en este directorio`,howToFix:`Cómo solucionarlo:`,sandboxed:`El servicio de Bambuddy no puede escribir en {{path}}. Su unidad de systemd se ejecuta con ProtectSystem=strict, lo que hace que todo directorio fuera de los de instalación, datos y registros sea de solo lectura para el servicio, incluso uno en el que usted sí puede escribir desde su propia shell.`,read_only:`{{path}} está en un sistema de archivos de solo lectura.`,permission_denied:`Bambuddy no tiene permiso para escribir en {{path}}. Compruebe el propietario y los permisos del directorio.`,no_space:`El sistema de archivos que contiene {{path}} está lleno.`,not_a_directory:`{{path}} existe pero no es un directorio.`,missing:`{{path}} no existe y no se pudo crear.`,error:`Bambuddy no puede escribir en {{path}}.`,ephemeralTitle:`Estas copias de seguridad no sobrevivirán a la recreación del contenedor`,container_ephemeral:`{{path}} está dentro del contenedor de Bambuddy, no en el host. Las copias escritas ahí se pierden cuando se recrea el contenedor. Monte el directorio desde el host:`},categories:{settings:`Ajustes`,notification_providers:`Proveedores de notificaciones`,notification_templates:`Plantillas de notificaciones`,smart_plugs:`Enchufes inteligentes`,printers:`Impresoras`,filaments:`Filamentos`,maintenance_types:`Tipos de mantenimiento`,archives:`Archivos`,projects:`Proyectos`,pending_uploads:`Subidas pendientes`,external_links:`Enlaces externos`,api_keys:`Claves API`}},tags:{title:`Etiquetas`,addTag:`Añadir etiqueta`,editTag:`Editar etiqueta`,deleteTag:`Eliminar etiqueta`,tagName:`Nombre de la etiqueta`,tagColor:`Color de la etiqueta`,noTags:`No hay etiquetas`,deleteConfirm:`¿Está seguro de que desea eliminar esta etiqueta?`,manageTags:`Gestionar etiquetas`},uploadModal:{title:`Subir archivos 3MF`,dragDrop:`Arrastre y suelte archivos .3mf aquí`,or:`o`,browseFiles:`Examinar archivos`,extractionInfo:`El modelo de impresora se extraerá automáticamente de los metadatos del archivo 3MF.`,uploaded:`subidos`,failed:`fallidos`,uploading:`Subiendo...`,upload:`Subir`,uploadFailed:`Error al subir`},editArchive:{title:`Editar archivo`,name:`Nombre`,namePlaceholder:`Nombre de la impresión`,printer:`Impresora`,noPrinter:`Sin impresora`,project:`Proyecto`,noProject:`Sin proyecto`,itemsPrinted:`Elementos impresos`,itemsPrintedHelp:`Número de elementos producidos en este trabajo de impresión. Use 0 si toda la placa se estropeó.`,filamentUsed:`Filamento usado (g)`,filamentUsedPlaceholder:`p. ej. 46.16`,filamentUsedHelp:`Introdúcelo a mano cuando una impresión se haya archivado sin su 3MF, para que siga contando en los totales de filamento. Al volver a escanear un archivo que sí tiene su 3MF, el valor se lee de nuevo del fichero.`,notes:`Notas`,notesPlaceholder:`Añada notas sobre esta impresión...`,externalLink:`Enlace externo`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Enlace a Printables, Thingiverse u otra fuente`,tags:`Etiquetas`,tagsPlaceholder:`Añada etiquetas...`,addMoreTags:`Añada más etiquetas...`,matchingTags:`Coincidentes con "{{query}}"`,existingTags:`Etiquetas existentes`,clickToAdd:`(haga clic para añadir)`,status:`Estado`,failureReason:`Motivo del fallo`,selectReason:`Seleccionar motivo...`,photos:`Fotos del resultado impreso`,photosHelp:`Haga clic en + para añadir fotos de su resultado impreso`,printResult:`Resultado de la impresión`,saving:`Guardando...`,failureReasons:{adhesionFailure:`Fallo de adhesión`,spaghettiDetached:`Espagueti / Desprendido`,layerShift:`Desplazamiento de capa`,cloggedNozzle:`Boquilla obstruida`,filamentRunout:`Agotamiento del filamento`,warping:`Alabeo`,stringing:`Hilos`,underExtrusion:`Subextrusión`,powerFailure:`Corte de corriente`,userCancelled:`Cancelada por el usuario`,noStatusUpdate:`No se recibió actualización de estado`,other:`Otro`},statuses:{completed:`Completada`,failed:`Fallida`,aborted:`Cancelada`,printing:`Imprimiendo`}},kProfiles:{title:`Perfiles K`,noPrintersConfigured:`No hay impresoras configuradas`,addPrinterInSettings:`Añada una impresora en Ajustes para gestionar perfiles K`,noActivePrinters:`No hay impresoras activas`,enablePrinterConnection:`Active la conexión de una impresora para ver sus perfiles K`,loadingProfiles:`Cargando perfiles K...`,printerOffline:`Impresora desconectada`,printerOfflineDesc:`La impresora seleccionada no está conectada. Enciéndala para ver los perfiles K.`,noMatchingProfiles:`No hay perfiles coincidentes`,noMatchingProfilesDesc:`Ningún perfil coincide con sus criterios de búsqueda`,noKProfiles:`No hay perfiles K`,noKProfilesDesc:`No se encontraron perfiles de avance de presión para la boquilla de {{diameter}} mm`,createFirstProfile:`Crear el primer perfil`,printer:`Impresora`,nozzle:`Boquilla`,refresh:`Actualizar`,addProfile:`Añadir perfil`,export:`Exportar`,import:`Importar`,select:`Seleccionar`,selectAll:`Seleccionar todo`,delete:`Eliminar`,searchPlaceholder:`Buscar por nombre o filamento...`,allExtruders:`Todos los extrusores`,leftOnly:`Solo izquierdo`,rightOnly:`Solo derecho`,allFlow:`Todos los flujos`,hfOnly:`Solo flujo alto`,sOnly:`Solo estándar`,sortName:`Ordenar: nombre`,sortKValue:`Ordenar: valor K`,sortFilament:`Ordenar: filamento`,leftExtruder:`Extrusor izquierdo`,rightExtruder:`Extrusor derecho`,modal:{addTitle:`Añadir perfil K`,editTitle:`Editar perfil K`,profileName:`Nombre del perfil`,profileNamePlaceholder:`Mi perfil de PLA`,kValue:`Valor K`,kValuePlaceholder:`0,020`,kValueHelp:`Rango típico: 0,01 - 0,06 para PLA, 0,02 - 0,10 para PETG`,filament:`Filamento`,selectFilament:`Seleccionar filamento...`,source:{local:`Importado`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Integrado`},noFilamentsHelp:`No hay filamentos disponibles. Inicia sesión en Bambu Cloud o importa ajustes en Perfiles → Perfiles locales.`,searchFilaments:`Buscar filamentos...`,noFilamentMatches:`Ningún filamento coincide con esa búsqueda`,flowType:`Tipo de flujo`,highFlow:`Flujo alto`,standard:`Estándar`,nozzleSize:`Tamaño de la boquilla`,extruder:`Extrusor`,extruders:`Extrusores`,left:`Izquierdo`,right:`Derecho`,notes:`Notas (almacenadas localmente)`,notesPlaceholder:`Añada notas sobre este perfil...`,notesHelp:`Las notas se guardan en Bambuddy, no en la impresora`,syncing:`Sincronizando con la impresora...`,savingExtruder:`Guardando en el extrusor {{current}}/{{total}}...`,pleaseWait:`Espere`},deleteConfirm:{title:`Eliminar perfil`,cannotUndo:`Esto no se puede deshacer`,message:`¿Está seguro de que desea eliminar "{{name}}" de la impresora?`},bulkDelete:{title:`Eliminar perfiles`,cannotUndo:`Esto no se puede deshacer`,message:`¿Está seguro de que desea eliminar {{count}} perfiles seleccionados de la impresora?`},toast:{profileSaved:`Perfil K guardado`,profilesSaved:`Perfil K guardado en {{count}} extrusores`,selectAtLeastOneExtruder:`Seleccione al menos un extrusor`,selectFilament:`Selecciona primero un filamento`,filamentNotResolvable:`No hay ID de filamento Bambu para {{name}}: la impresora no puede guardar un perfil`,profileDeleted:`Perfil K eliminado`,profilesDeleted:`Se eliminaron {{count}} perfiles`,exportedProfiles:`Se exportaron {{count}} perfiles`,importedProfiles:`Se importaron {{count}} de {{total}} perfiles`,noProfilesToExport:`No hay perfiles que exportar`,invalidFileFormat:`Formato de archivo no válido`,failedToParseImport:`Error al analizar el archivo de importación`,failedToSaveBatch:`Error al guardar los perfiles K`,noteSaved:`Nota guardada`,failedToSaveNote:`Error al guardar la nota`},permission:{noRead:`No tiene permiso para actualizar perfiles`,noCreate:`No tiene permiso para añadir perfiles`,noUpdate:`No tiene permiso para actualizar perfiles K`,noDelete:`No tiene permiso para eliminar perfiles K`,noExport:`No tiene permiso para exportar perfiles`,noImport:`No tiene permiso para importar perfiles`}},virtualPrinter:{title:`Impresora virtual`,running:`En ejecución`,stopped:`Detenida`,description:{default:`Active una impresora virtual que aparece en Bambu Studio y OrcaSlicer. Los archivos enviados a esta impresora se archivarán directamente sin imprimir.`,proxy:`Active un proxy que retransmite el tráfico del laminador a una impresora real, permitiendo la impresión remota a través de cualquier red.`},enable:{title:`Activar la impresora virtual`,visibleInSlicer:`Visible como "Bambuddy" en la detección del laminador`,proxyingTo:`Haciendo de proxy hacia {{name}}`,notActive:`No activa`},model:{title:`Modelo de impresora`,description:`Seleccione qué modelo de impresora emular.`,restartWarning:`Cambiar el modelo reiniciará la impresora virtual`},accessCode:{title:`Código de acceso`,isSet:`El código de acceso está establecido`,notSet:`No hay código de acceso establecido - necesario para activarla`,placeholder:`Introduzca un código de 8 caracteres`,placeholderChange:`Introduzca un nuevo código para cambiarlo`,hint:`Debe tener exactamente 8 caracteres. Los laminadores lo usan para autenticarse.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Heredado de la impresora de destino`,derivedFromTargetHint:`Usa el código de acceso de la impresora de destino. El puente reenvía la autenticación del laminador a la impresora real, por lo que los códigos deben coincidir — edita el código en los ajustes de la impresora para cambiarlo.`,reveal:`Mostrar código de acceso`,hide:`Ocultar código de acceso`},targetPrinter:{title:`Impresora de destino`,configured:`Destino del proxy configurado`,notConfigured:`No hay impresora de destino seleccionada - necesaria para el modo proxy`,placeholder:`Seleccionar una impresora...`,hint:`Seleccione la impresora a la que retransmitir el tráfico del laminador. La impresora debe estar en modo LAN.`,noPrinters:`No hay impresoras configuradas. Añada primero una impresora para usar el modo proxy.`},remoteInterface:{title:`Anulación de la interfaz de red`,configured:`Anulación de la interfaz activa`,optional:`Opcional - úsela si la IP detectada automáticamente es incorrecta (p. ej. varias tarjetas de red, Docker, VPN)`,placeholder:`Detección automática (predeterminada)...`,hint:`Anula la dirección IP anunciada mediante SSDP y usada en el certificado TLS. Útil cuando Bambuddy tiene varias interfaces de red.`},mode:{title:`Modo`,archive:`Archivar`,archiveDesc:`Archivar los archivos inmediatamente`,review:`Revisar`,reviewDesc:`Revisar antes de archivar`,queue:`Encolar`,queueDesc:`Archivar y añadir a la cola`,proxy:`Proxy`,proxyDesc:`Retransmitir a una impresora real`},autoDispatch:{title:`Envío automático`,description:`Iniciar automáticamente las impresiones al añadirlas a la cola. Cuando está desactivado, las impresiones esperan al envío manual.`},queueForceColorMatch:{title:`Forzar la coincidencia de color`,description:`Negarse a enviar a una impresora que no tiene cargados el tipo y el color exactos de filamento. Desactivado de forma predeterminada — sin esto, la cola usa la coincidencia solo por modelo y puede elegir una impresora con el color equivocado cargado.`},saveAmsMapping:{title:`Guardar mapeo de AMS`,description:`Guarda en el archivo la selección de ranura AMS propia del slicer (del comando MQTT project_file), de modo que una reimpresión posterior reutilice el mismo carrete físico en lugar de volver a derivarlo del tipo/color del archivo. Desactivado de forma predeterminada.`},gcodeInjection:{title:`Inyección de G-code`,description:`Aplica los fragmentos de G-code configurados por modelo en Ajustes a los trabajos de esta IV. Desactivado de forma predeterminada.`},tailscaleDisabled:{title:`Integración con Tailscale`,description:`Actívelo para marcar esta IV como expuesta a través de Tailscale. Muestra la dirección de Tailscale del host para que sepa qué IP pegar en el laminador. El paso de importación de la CA no cambia — este interruptor no tiene ningún efecto sobre los certificados.`},setupRequired:{title:`Configuración necesaria`,description:`La función de impresora virtual requiere configuración adicional del sistema antes de funcionar. Esto incluye el reenvío de puertos, las reglas del cortafuegos y los ajustes específicos de la plataforma.`,readGuide:`Lea la guía de configuración antes de activarla`},archiveNameSource:{title:`Origen del nombre del archivo`,description:`Elija cómo se nombran los archivos nuevos cuando llegan a través de la impresora virtual. «Metadatos» usa el título incrustado por el laminador del 3MF (predeterminado). «Nombre de archivo» usa el nombre de archivo que Bambu Studio envió por FTP. Nota: Bambu Studio sobrescribe el nombre que escribe en el diálogo «enviar a la impresora» con el campo Título del 3MF cuando existe, por lo que ambos modos suelen producir la misma cadena.`,metadata:`Metadatos`,filename:`Nombre de archivo`},caCert:{title:`Certificado del laminador`,description:`Las impresoras virtuales usan un certificado TLS firmado por la CA de Bambuddy. Importe este certificado de CA en el almacén de confianza de su laminador una sola vez para que acepte la conexión — sin necesidad de copiarlo desde la línea de comandos.`,copy:`Copiar`,copied:`Copiado`,download:`Descargar`,fingerprint:`SHA-256`},howItWorks:{title:`Cómo funciona`,step1:`En la misma LAN, las impresoras virtuales aparecen automáticamente en su laminador (Bambu Studio / OrcaSlicer) mediante detección. Desde otras redes, añádalas manualmente por dirección IP y código de acceso.`,step2:`En los modos Archivar, Revisar y Encolar, use el botón «Enviar» de su laminador para subir archivos 3MF a Bambuddy. El laminador mostrará «Impresión correcta» — el archivo se almacena, no se imprime.`,step3:`En el modo Proxy, la impresora virtual retransmite todo el tráfico a una impresora real — las impresiones comienzan inmediatamente como si estuviera conectada directamente.`},status:{title:`Detalles del estado`,printerName:`Nombre de la impresora`,model:`Modelo`,serialNumber:`Número de serie`,mode:`Modo`,pendingFiles:`Archivos pendientes`,targetPrinter:`Impresora de destino`,ftpPort:`Puerto FTP`,mqttPort:`Puerto MQTT`,ftpConnections:`Conexiones FTP`,mqttConnections:`Conexiones MQTT`},toast:{updated:`Ajustes de la impresora virtual actualizados`,failedToUpdate:`Error al actualizar los ajustes`,copyFailed:`Error al copiar — pruebe a seleccionar el texto manualmente`,accessCodeRequired:`Establezca primero un código de acceso`,targetPrinterRequired:`Seleccione primero una impresora de destino`,bindIpRequired:`Establezca primero una IP de enlace`,accessCodeEmpty:`El código de acceso no puede estar vacío`,accessCodeLength:`El código de acceso debe tener exactamente 8 caracteres`,targetCodeChangedRebind:`El código de acceso ahora coincide con la nueva impresora de destino. Vuelve a añadir este dispositivo en tu laminador para usar el nuevo código.`,created:`Impresora virtual creada`,failedToCreate:`Error al crear la impresora virtual`,deleted:`Impresora virtual eliminada`,failedToDelete:`Error al eliminar la impresora virtual`},list:{title:`Impresoras virtuales`,add:`Añadir`,addFirst:`Añadir impresora virtual`,empty:`No hay impresoras virtuales configuradas. Añada una para empezar.`},bindIp:{title:`Interfaz de enlace`,placeholder:`Seleccionar interfaz...`,hint:`Interfaz de red a la que se enlaza esta impresora virtual. Debe ser única por impresora.`},proxy:{accessCodeHint:`En el modo proxy, use el código de acceso de su impresora de destino en el laminador. La conexión se reenvía de forma transparente a la impresora real.`},addDialog:{title:`Añadir impresora virtual`,name:`Nombre`,hint:`Puede configurar el código de acceso, la impresora de destino y otros ajustes después de crearla.`,create:`Crear`},deleteConfirm:{title:`Eliminar impresora virtual`,message:`¿Está seguro de que desea eliminar "{{name}}"? Esto detendrá todos los servicios de esta impresora.`}},modelViewer:{openInSlicer:`Abrir en el laminador`,openInSlicerWith:`Abrir en {{slicer}}`,moreSlicerOptions:`Más opciones de laminador`,openInSlicerFailed:`No se pudo abrir en el laminador`,tabs:{model:`Modelo 3D`},notAvailable:`no disponible`,plates:`Camas`,allPlates:`Todas las camas`,plateNumber:`Cama {{number}}`,plateCount:`{{count}} cama`,plateCount_other:`{{count}} camas`,objectCount:`{{count}} objeto`,objectCount_other:`{{count}} objetos`,filamentCount:`{{count}} filamento`,filamentCount_other:`{{count}} filamentos`,eta:`Tiempo estimado {{minutes}} min`,noPreview:`No hay vista previa disponible para este archivo`,pagination:{pageOf:`Página {{current}} de {{total}}`,prev:`Anterior`,next:`Siguiente`},errors:{failedToLoad:`Error al cargar el archivo`,noMeshes:`No se encontraron mallas en el archivo 3MF`,unsupportedFormat:`Formato de archivo no compatible`}},maintenanceDescriptions:{lubricateCarbonRods:`Aplique lubricante a las varillas de carbono para un movimiento suave`,lubricateRails:`Aplique lubricante a las guías lineales para un movimiento suave`,cleanNozzle:`Limpie el fusor y la boquilla para evitar obstrucciones`,checkBelts:`Verifique la tensión de las correas para impresiones precisas`,cleanBuildPlate:`Limpie la cama de impresión para una mejor adhesión`,checkExtruder:`Inspeccione los engranajes del extrusor en busca de desgaste`,checkCooling:`Asegúrese de que los ventiladores de refrigeración funcionan correctamente`,generalInspection:`Inspección general de la impresora`,cleanCarbonRods:`Limpie las varillas de carbono para reducir la fricción`,lubricateSteelRods:`Aplique lubricante a las varillas de acero para un movimiento suave`,cleanSteelRods:`Limpie las varillas de acero para reducir la fricción`,cleanLinearRails:`Limpie las guías lineales para eliminar el polvo y los residuos`,checkPtfeTube:`Inspeccione el tubo de PTFE en busca de desgaste o daños`,replaceHepaFilter:`Reemplace el filtro HEPA para la calidad del aire`,replaceCarbonFilter:`Reemplace el filtro de carbón activado`,lubricateLeftNozzleRail:`Lubrique la guía de la boquilla izquierda (serie H2)`},haSensors:{label:`Sensores`,unavailable:`No disponible`,blocksPrints:`{{entity}} — retiene las impresiones mientras haya alerta`,states:{open:`Abierto`,closed:`Cerrado`,unlocked:`Desbloqueado`,locked:`Bloqueado`,detected:`Detectado`,clear:`Despejado`,wet:`Húmedo`,dry:`Seco`,problem:`Problema`,ok:`OK`,running:`En marcha`,stopped:`Detenido`,on:`Encendido`,off:`Apagado`},sectionTitle:`Sensores de Home Assistant (impresoras)`,add:`Añadir sensor`,addTitle:`Añadir sensor de Home Assistant`,editTitle:`Editar sensor de Home Assistant`,empty:`Aún no hay sensores. Vincula un contacto de puerta o un termómetro de Home Assistant para mostrarlo en la tarjeta de la impresora.`,unknownPrinter:`Impresora desconocida`,badgeBlocks:`Retiene impresiones`,badgeNotifies:`Notifica`,badgeHidden:`Oculto en la tarjeta`,printer:`Impresora`,entity:`Entidad`,searchPlaceholder:`Buscar entidades...`,noEntities:`No hay entidades coincidentes`,name:`Nombre visible`,alertWhen:`Alertar cuando`,alertNever:`Nunca — solo mostrar`,alertAbove:`Por encima de`,alertBelow:`Por debajo de`,alertHint:`El estado de alerta resalta el sensor en la tarjeta de la impresora y habilita las opciones de abajo.`,showOnCard:`Mostrar en la tarjeta de la impresora`,notifyOnAlert:`Enviar una notificación cuando empiece la alerta`,blockPrint:`Retener las impresiones en cola mientras haya alerta`,blockPrintHint:`Los trabajos siguen en cola y arrancan solos cuando el sensor se despeja. Se ignora mientras Home Assistant no esté accesible.`,toast:{created:`Sensor añadido`,updated:`Sensor guardado`,deleted:`Sensor eliminado`},error:{pickEntity:`Elige una entidad de Home Assistant`,nameRequired:`Introduce un nombre visible`,printerRequired:`Elige una impresora`,alertRequired:`Define primero una condición de alerta`}},locationHaSensors:{sectionTitle:`Sensores de Home Assistant (ubicaciones de almacenamiento)`,sectionDescription:`Vincule sensores de temperatura, humedad o batería de Home Assistant a sus ubicaciones de almacenamiento para mostrar lecturas en vivo en la tarjeta de filamento y en la tabla. Solo se permite un sensor por categoría y ubicación.`,add:`Añadir sensor`,addTitle:`Añadir sensor de Home Assistant`,editTitle:`Editar sensor de Home Assistant`,empty:`Aún no hay sensores. Vincula un sensor de temperatura o humedad de Home Assistant para mostrarlo en la tarjeta del filamento.`,unknownLocation:`Ubicación desconocida`,location:`Ubicación de almacenamiento`,showOnCard:`Mostrar en la tarjeta del filamento`,overwriteConfirm:{title:`¿Reemplazar el sensor existente?`,messageTemperature:`"{{location}}" ya tiene un sensor de temperatura vinculado: {{name}}. Si continúas, se reemplazará.`,messageHumidity:`"{{location}}" ya tiene un sensor de humedad vinculado: {{name}}. Si continúas, se reemplazará.`,messageBattery:`"{{location}}" ya tiene un sensor de batería vinculado: {{name}}. Si continúas, se reemplazará.`},autoAdd:{confirmTitle:`¿Añadir también los otros sensores?`,confirmMessage:`Bambuddy también encontró otros sensores para esta ubicación. Elige cuáles añadir también.`,added:`También añadido: {{names}}`,noneFound:`No se encontraron sensores de temperatura, humedad o batería coincidentes para esta ubicación.`,onlyThisOne:`Solo este`},options:{buttonLabel:`Opciones de sensores`,title:`Opciones de sensores de ubicación`,description:`Estos valores se usan cuando un sensor de temperatura, humedad o batería se vincula automáticamente junto con el primer sensor de una ubicación.`,generalSettings:`Ajustes generales`,pollInterval:`Intervalo de actualización (segundos)`,pollIntervalHint:`Con qué frecuencia Bambuddy consulta Home Assistant y actualiza los valores de los sensores en pantalla. Mínimo 60 segundos.`,colorizeValues:`Colorear los valores de los sensores según sus umbrales de alerta`,aboveColor:`Color al superar el umbral`,belowColor:`Color al estar por debajo del umbral`,optimalColor:`Color para el valor óptimo`,colors:{red:`Rojo`,orange:`Naranja`,yellow:`Amarillo`,green:`Verde`,blue:`Azul`,purple:`Morado`,pink:`Rosa`},saved:`Opciones guardadas`,saveFailed:`No se pudieron guardar las opciones`,reset:`Restablecer`,resetConfirm:{title:`¿Restablecer todos los sensores de ubicación existentes?`,message:`Esto sobrescribe los umbrales de alerta, las notificaciones y la visibilidad en la tarjeta de todos los sensores de temperatura, humedad y batería de ubicaciones existentes con los valores configurados arriba, y restaura el nombre de cada sensor a su nombre descriptivo de Home Assistant; los sensores de impresora no se ven afectados. Esto no se puede deshacer. Dependiendo de cuántos sensores tenga, esto puede tardar un momento.`},resetDone:`Aplicado a {{count}} sensores de ubicación`,resetFailed:`No se pudieron restablecer los sensores de ubicación`},deleteAllConfirm:{title:`¿Eliminar todos los sensores?`,message:`Esto elimina los {{count}} sensores vinculados a "{{location}}". Esta acción no se puede deshacer.`},currentlyBound:`Actualmente vinculado: {{entity}}`,error:{locationRequired:`Elige una ubicación de almacenamiento`},toast:{created:`Sensor añadido`,updated:`Sensor guardado`,deleted:`Sensor eliminado`}},smartPlugs:{offline:`Desconectado`,admin:`Administración`,openPlugAdminPage:`Abrir la página de administración del enchufe`,deleteSmartPlug:`Eliminar enchufe inteligente`,turnOnSmartPlug:`Encender el enchufe inteligente`,turnOffSmartPlug:`Apagar el enchufe inteligente`,turnOn:`Encender`,turnOff:`Apagar`,addSmartPlug:{scanningNetwork:`Escaneando la red...`,chooseEntity:`Elija una entidad...`,connectionFailed:`Error de conexión`,searchEntities:`Buscar entidades...`,searchPowerSensors:`Buscar sensores de potencia...`,searchEnergySensors:`Buscar sensores de energía...`,placeholders:{plugName:`Enchufe del salón`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Igual que el tema de potencia, o distinto`}},linkedTo:`Vinculado a:`,monitorOnly:`Solo supervisión`,alerts:`Alertas`,scheduleOn:`Encendido a las {{time}}`,scheduleOff:`Apagado a las {{time}}`,on:`Encendido`,off:`Apagado`,power:`Potencia`,kwhToday:`kWh hoy`,settings:`Ajustes`,automationSettings:`Ajustes de automatización`,showInSwitchbar:`Mostrar en la barra de interruptores`,quickAccessSidebar:`Acceso rápido desde la barra lateral`,enabled:`Activada`,enableAutomation:`Activar la automatización para este enchufe`,autoOn:`Encendido automático`,autoOnDescription:`Encender cuando comienza la impresión`,autoOff:`Apagado automático`,autoOffDescription:`Apagar cuando se completa la impresión (una sola vez)`,autoOffPersistent:`Mantener activado`,autoOffPersistentDescription:`Permanecer activado entre impresiones en lugar de una sola vez`,controlsPrinterPower:`Alimenta la impresora`,controlsPrinterPowerDescription:`Desactívalo si este enchufe solo alimenta un accesorio (ventilador de filtro, luces). De lo contrario, apagarlo marca la impresora como desconectada.`,autoOffAfterDrying:`Apagado automático tras el secado`,autoOffAfterDryingDescription:`Apagar cuando se completa el secado del AMS`,delayAfterDryingMinutes:`Retardo de secado (minutos)`,turnOffDelayMode:`Modo de retardo de apagado`,time:`Tiempo`,temp:`Temp.`,delayMinutes:`Retardo (minutos)`,tempThreshold:`Umbral de temperatura (°C)`,tempThresholdDescription:`Se apaga cuando la boquilla se enfría por debajo de esta temperatura`,edit:`Editar`,deleteConfirm:`¿Está seguro de que desea eliminar "{{name}}"? Esto no se puede deshacer.`,turnOnConfirm:`¿Está seguro de que desea encender "{{name}}"?`,turnOffConfirm:`¿Está seguro de que desea apagar "{{name}}"? Esto cortará la corriente al dispositivo conectado.`,failedToTurn:`Error al {{action}} "{{name}}"`,unknown:`Desconocido`,addTitle:`Añadir enchufe inteligente`,editTitle:`Editar enchufe inteligente`,stopScanning:`Detener escaneo`,discoverTasmota:`Detectar dispositivos Tasmota`,foundDevices:`Se encontraron {{count}} dispositivo(s) - haga clic para seleccionar:`,noDevicesFound:`No se encontraron dispositivos Tasmota en su red`,haNotConfigured:`Home Assistant no está configurado. Configúrelo en`,haSettingsPath:`Ajustes → Red → Home Assistant`,selectEntity:`Seleccionar entidad *`,ipAddress:`Dirección IP *`,nameLabel:`Nombre *`,username:`Nombre de usuario`,password:`Contraseña`,authHint:`Déjelo vacío si su dispositivo Tasmota no requiere autenticación`,linkToPrinter:`Vincular a una impresora`,noPrinter:`Sin impresora (solo control manual)`,linkingDescription:`La vinculación activa el encendido/apagado automático cuando las impresiones comienzan/terminan`,powerAlerts:`Alertas de potencia`,alertAbove:`Alertar si supera (W)`,alertBelow:`Alertar si está por debajo (W)`,alertDescription:`Reciba una notificación cuando el consumo de energía cruce estos umbrales. Déjelo vacío para desactivar esa dirección.`,dailySchedule:`Programación diaria`,turnOnAt:`Encender a las`,turnOffAt:`Apagar a las`,scheduleDescription:`Encender/apagar automáticamente el enchufe a estas horas cada día. Déjelo vacío para omitir esa acción.`,showOnPrinterCard:`Mostrar en la tarjeta de la impresora`,displayOnPrinterCard:`Mostrar el botón en la tarjeta de la impresora`,connectedResult:`¡Conectado!`,deviceLabel:`Dispositivo: {{name}} - `,stateLabel:`Estado: {{state}}`,test:`Probar`,delete:`Eliminar`,save:`Guardar`,add:`Añadir`,cancel:`Cancelar`,failedToStartScan:`Error al iniciar el escaneo`,nameRequired:`El nombre es obligatorio`,entityRequired:`La entidad es obligatoria para los enchufes de Home Assistant`,mqttTopicRequired:`Debe configurarse al menos un tema MQTT para la supervisión de potencia, energía o estado`,loadingEntities:`Cargando entidades...`,loading:`Cargando...`,failedToLoadEntities:`Error al cargar las entidades: {{error}}`,noEntitiesMatching:`No se encontraron entidades que coincidan con "{{search}}"`,noEntitiesAvailable:`No hay entidades disponibles`,searchingEntities:`Buscando en todas las entidades ({{count}} encontradas)`,showingEntities:`Mostrando switch, light, input_boolean ({{count}} disponibles)`,energyMonitoringOptional:`Supervisión de energía (opcional)`,energyMonitoringHint:`Busque y seleccione sensores que proporcionen datos de potencia/energía.`,powerSensorW:`Sensor de potencia (W)`,energyTodayKwh:`Energía de hoy (kWh)`,totalEnergyKwh:`Energía total (kWh)`,noMatchingSensors:`No hay sensores coincidentes`,none:`Ninguno`,mqttNotConfigured:`El broker MQTT no está configurado. Establezca la dirección del broker en`,mqttSettingsPath:`Ajustes → Red → Publicación MQTT`,mqttNotConfiguredSuffix:`(no necesita activar la publicación, solo rellenar los datos del broker).`,mqttMonitorOnlyDescription:`Los enchufes MQTT reciben los datos de potencia/energía mediante una suscripción MQTT. El control de encendido/apagado no está disponible - use su broker MQTT o sistema de domótica.`,powerMonitoring:`Supervisión de potencia`,energyMonitoring:`Supervisión de energía`,stateMonitoring:`Supervisión de estado`,optional:`opcional`,topic:`Tema`,jsonPath:`Ruta JSON`,multiplier:`Multiplicador`,onValue:`Valor de ON`,mqttPowerHint:`La ruta JSON extrae el valor de la carga útil JSON (p. ej., "power_l1"). Déjelo vacío si el tema publica valores numéricos sin procesar.
+EIN-Wert: der genaue String der "EIN" bedeutet. Leer lassen für Auto-Erkennung (ON, true, 1).`,restControl:`Steuerung`,restOnUrl:`Einschalt-URL`,restOffUrl:`Ausschalt-URL`,restOnBody:`EIN-Anforderungstext`,restOffBody:`AUS-Anforderungstext`,restMethod:`HTTP-Methode`,restHeaders:`Custom Headers (JSON)`,restStatusUrl:`Status-URL`,restStatusPath:`JSON-Pfad für Status`,restStatusOnValue:`EIN-Wert`,restPowerUrl:`Strom-URL`,restPowerPath:`JSON-Pfad für Leistung`,restPowerMultiplier:`Power Multiplikator`,restEnergyUrl:`Energie URL`,restEnergyPath:`JSON-Pfad für Energie (heute)`,restEnergyTotalPath:`JSON-Pfad für Energie (Gesamtzähler)`,restEnergyTotalMultiplier:`Multiplikator Gesamtzähler`,restEnergyTotalPathHint:`z.B. aenergy.total`,restEnergyTotalHint:`Viele Steckdosen — darunter alle Shellys — liefern nur einen Gesamtzähler, der nie zurückgesetzt wird. Er gehört hierher, nicht in das Feld darüber: als Tagesverbrauch gelesen würde er um Mitternacht nie zurückspringen, und Gestern und Gesamt blieben leer. Bambuddy errechnet Heute und Gestern daraus, wofür ein bis zwei Tage an Messwerten nötig sind. Ein Shelly liefert Wattstunden, also Multiplikator 0.001 verwenden.`,restEnergyMultiplier:`Energie Multiplikator`,restUrlRequired:`Mindestens eine URL (ON oder OFF) ist für REST-Steckdosen erforderlich`,restHeadersHint:`z. B. {"Authorization": "Bearer your-token"}`,restBodyHint:`z. B. ON, {"state": "on"}`,restStatusHint:`URL zum Abfragen des aktuellen Status`,restPathHint:`z. B. state oder data.power.status`,restPowerUrlHint:`Eigene URL für Leistungsdaten (nutzt Status URL wenn leer)`,restEnergyUrlHint:`Eigene URL für Energiedaten (nutzt Status URL wenn leer)`,restEnergyHint:`Jeder Wert kann eine eigene URL verwenden oder auf die Status URL zurückgreifen. Multiplikatoren für Einheitenumrechnung verwenden (z.B. 0.001 für Wh zu kWh).`,testConnection:`Verbindung testen`,connectionSuccess:`Verbindung erfolgreich`,noSwitchesInSwitchbar:`Keine Schalter in der Schaltleiste`,enableSwitchbarHint:`"In Schaltleiste anzeigen" unter Einstellungen > Smart Plugs aktivieren`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`E-Mail`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`SMTP-E-Mail-Benachrichtigungen`,telegram:`Benachrichtigungen über Telegram-Bot`,discord:`An Discord-Kanal per Webhook senden`,ntfy:`Kostenlose, selbst-hostbare Push-Benachrichtigungen`,pushover:`Einfache, zuverlässige Push-Benachrichtigungen`,callmebot:`Kostenlose WhatsApp-Benachrichtigungen über CallMeBot`,webhook:`Generischer HTTP-POST an beliebige URL`,homeassistant:`Dauerhafte Benachrichtigungen im Home Assistant Dashboard`,bark:`iOS-Push-Benachrichtigungen über Bark (selbst hostbar)`},lastSuccess:`Zuletzt: {{date}}`,error:`Fehler`,printer:`Drucker:`,allPrinters:`Alle Drucker`,sendTestNotification:`Testbenachrichtigung senden`,eventSettings:`Ereigniseinstellungen`,enabled:`Aktiviert`,sendFromProvider:`Benachrichtigungen von diesem Anbieter senden`,printEvents:`Druckereignisse`,printerStatus:`Druckerstatus`,amsAlarms:`AMS-Alarme`,amsHtAlarms:`AMS-HT-Alarme`,printQueue:`Druckwarteschlange`,start:`Start`,plateCheck:`Plattenkontrolle`,complete:`Abgeschlossen`,failed:`Fehlgeschlagen`,stopped:`Gestoppt`,progress:`Fortschritt`,offline:`Offline`,lowFilament:`Filament niedrig`,maintenance:`Wartung`,amsHumidity:`AMS-Feuchtigkeit`,amsTemp:`AMS-Temperatur`,amsDryingSuspended:`Trocknung ausgesetzt`,amsHtHumidity:`AMS-HT-Feuchtigkeit`,amsHtTemp:`AMS-HT-Temperatur`,bedCooled:`Bett abgekühlt`,firstLayer:`Erste Schicht`,quiet:`Ruhe`,digest:`Zusammenfassung {{time}}`,printStarted:`Druck gestartet`,plateNotEmpty:`Platte nicht leer`,plateNotEmptyDescription:`Objekte vor dem Druck erkannt`,plateClearRequired:`Platte freigeben`,plateClearRequiredDescription:`Druck beendet, Warteschlange wartet auf Bestätigung`,plateClear:`Platte freigeben`,printCompleted:`Druck abgeschlossen`,bedCooledLabel:`Bett abgekühlt`,bedCooledDescription:`Bett nach dem Druck unter Schwellenwert abgekühlt`,firstLayerCompleteLabel:`Erste Schicht fertig`,firstLayerCompleteDescription:`Benachrichtigung mit Foto nach erster Schicht`,missingSpoolAssignmentLabel:`Fehlende Spulenzuordnung`,billingChargeFailedLabel:`Abrechnungsfehler`,billingChargeFailedDescription:`Benachrichtigen, wenn Druckkosten nicht verbucht werden konnten`,missingSpoolAssignmentDescription:`Benachrichtigen, wenn ein Druck startet und benoetigte Schaechte keine zugeordnete Spule haben`,printFailed:`Druck fehlgeschlagen`,printStopped:`Druck gestoppt`,progressMilestones:`Fortschrittsmeilensteine`,progressMilestonesDescription:`Benachrichtigung bei 25%, 50%, 75%`,printerOffline:`Drucker offline`,printerError:`Druckerfehler`,aiFailureDetection:`KI-Fehlererkennung`,aiFailureDetectionDescription:`Benachrichtigen, wenn die Obico-KI einen möglichen Druckfehler erkennt`,lowFilamentLabel:`Filament niedrig`,maintenanceDue:`Wartung fällig`,maintenanceDueDescription:`Benachrichtigen, wenn Wartung erforderlich ist`,amsHumidityHigh:`AMS-Feuchtigkeit hoch`,amsHumidityHighDescription:`Normale AMS-Feuchtigkeit überschreitet Schwellenwert`,amsTemperatureHigh:`AMS-Temperatur hoch`,amsTemperatureHighDescription:`Normale AMS-Temperatur überschreitet Schwellenwert`,amsDryingSuspendedTitle:`Automatische Trocknung ausgesetzt`,amsDryingSuspendedDescription:`Automatische Trocknung wurde für eine AMS-Einheit aufgegeben, weil die Luftfeuchtigkeit nie unter den Schwellenwert fiel`,amsHtHumidityHigh:`AMS-HT-Feuchtigkeit hoch`,amsHtHumidityHighDescription:`AMS-HT-Feuchtigkeit überschreitet Schwellenwert`,amsHtTemperatureHigh:`AMS-HT-Temperatur hoch`,amsHtTemperatureHighDescription:`AMS-HT-Temperatur überschreitet Schwellenwert`,inventoryAlerts:`Bestandswarnungen`,stockReorderAlert:`Nachbestellungswarnung`,stockReorderAlertDescription:`SKU hat seinen Nachbestellungspunkt erreicht`,stockBreakAlert:`Bestandsunterbrechungswarnung`,stockBreakAlertDescription:`Der Bestand wird vor dem Eintreffen der Nachbestellung aufgebraucht sein`,jobAdded:`Auftrag hinzugefügt`,jobAddedDescription:`Auftrag zur Warteschlange hinzugefügt`,jobAssigned:`Auftrag zugewiesen`,jobAssignedDescription:`Modellbasierter Auftrag einem Drucker zugewiesen`,jobStarted:`Auftrag gestartet`,jobStartedDescription:`Warteschlangenauftrag hat Druck begonnen`,jobWaiting:`Auftrag wartet`,jobWaitingDescription:`Auftrag wartet auf Filament oder Drucker`,jobSkipped:`Auftrag übersprungen`,jobSkippedDescription:`Auftrag übersprungen (vorheriger fehlgeschlagen)`,jobFailed:`Auftrag fehlgeschlagen`,jobFailedDescription:`Auftrag konnte nicht gestartet werden`,queueComplete:`Warteschlange abgeschlossen`,queueCompleteDescription:`Alle Warteschlangenaufträge beendet`,quietHours:`Ruhezeiten`,noNotificationsDuring:`Keine Benachrichtigungen während dieser Zeiten`,editProviderToChangeQuietHours:`Anbieter bearbeiten, um Ruhezeiten zu ändern`,dailyDigest:`Tägliche Zusammenfassung`,batchNotifications:`Benachrichtigungen zu einer täglichen Zusammenfassung bündeln`,sendAt:`Senden um {{time}}`,editProviderToChangeDigestTime:`Anbieter bearbeiten, um Zusammenfassungszeit zu ändern`,edit:`Bearbeiten`,deleteProvider:`Benachrichtigungsanbieter löschen`,deleteConfirm:`Sind Sie sicher, dass Sie "{{name}}" löschen möchten? Dies kann nicht rückgängig gemacht werden.`,delete:`Löschen`,addTitle:`Benachrichtigungsanbieter hinzufügen`,editTitle:`Benachrichtigungsanbieter bearbeiten`,nameLabel:`Name *`,namePlaceholder:`Meine Benachrichtigungen`,providerTypeLabel:`Anbietertyp *`,configuration:`Konfiguration`,testConfiguration:`Konfiguration testen`,printerFilter:`Druckerfilter`,onlyFromPrinter:`Nur Benachrichtigungen für Ereignisse von diesem Drucker senden`,quietHoursDnd:`Ruhezeiten (Nicht stören)`,quietStart:`Start`,quietEnd:`Ende`,dailyDigestLabel:`Tägliche Zusammenfassung`,sendDigestAt:`Zusammenfassung senden um`,digestCollected:`Ereignisse werden gesammelt und als einzelne Zusammenfassung zu dieser Zeit gesendet`,notificationEvents:`Benachrichtigungsereignisse`,progressPercent:`(25 %, 50 %, 75 %)`,bedCooledAfterPrint:`(nach Druckabschluss)`,haSensorAlert:`Drucker-Sensor-Alarm`,haSensorAlertDescription:`(ein verknüpfter Home-Assistant-Sensor braucht Aufmerksamkeit)`,locationHaSensorAlert:`Lagerort-Sensor-Alarm`,locationHaSensorAlertDescription:`(ein mit einem Lagerort verknüpfter Home-Assistant-Sensor braucht Aufmerksamkeit)`,eventPriority:{sectionTitle:`ntfy-Priorität`,helpNtfy:`Wähle eine Priorität pro aktiviertem Ereignis. ntfy nutzt diese, um Hinweise (Ton, Sichtbarkeit, Push-Verhalten) zu eskalieren. Hier nicht gesetzte Stufen verwenden den ntfy-Server-Standard.`,min:`Min.`,low:`Niedrig`,default:`Standard`,high:`Hoch`,urgent:`Dringend`},cancel:`Abbrechen`,save:`Speichern`,add:`Hinzufügen`,nameRequired:`Name ist erforderlich`,fieldRequired:`{{field}} ist erforderlich`,haDataInvalid:`Das Datenfeld muss ein gültiges JSON-Objekt sein, z. B. {"priority": "high", "ttl": 0}`,phoneNumber:`Telefonnummer`,apiKey:`API-Schlüssel`,serverUrl:`Server-URL`,topic:`Thema`,authToken:`Auth-Token`,userKey:`Benutzerschlüssel`,appToken:`App-Token`,priority:`Priorität`,pushoverRetry:`Notfall-Wiederholung (s)`,pushoverExpire:`Notfall-Ablauf (s)`,botToken:`Bot-Token`,chatId:`Chat-ID`,telegramThreadId:`Forum-Themen-ID`,telegramThreadIdHelp:`Optional. Sendet in ein einzelnes Thema einer Forum-Gruppe — die letzte Zahl im Themen-Link (t.me/c/.../25). Leer lassen für das allgemeine Thema.`,telegramThreadIdInvalid:`Die Forum-Themen-ID muss eine Zahl sein.`,smtpServer:`SMTP-Server`,smtpPort:`SMTP-Port`,security:`Sicherheit`,authentication:`Authentifizierung`,username:`Benutzername`,password:`Passwort`,fromEmail:`Absender-E-Mail`,toEmail:`Empfänger-E-Mail`,webhookUrl:`Webhook-URL`,payloadFormat:`Payload-Format`,authorization:`Autorisierung`,titleFieldName:`Titel-Feldname`,messageFieldName:`Nachrichten-Feldname`,editTemplate:`Vorlage bearbeiten: {{name}}`,titleLabel:`Titel`,bodyLabel:`Inhalt`,titlePlaceholder:`Benachrichtigungstitel...`,bodyPlaceholder:`Benachrichtigungsinhalt...`,availableVariables:`Verfügbare Variablen`,clickToInsert:`Klicken, um an Cursorposition im Inhalt einzufügen`,livePreview:`Live-Vorschau`,hide:`Ausblenden`,show:`Anzeigen`,loadingPreview:`Vorschau wird geladen...`,enterTemplateContent:`Vorlageninhalt eingeben, um Vorschau zu sehen`,titlePreview:`Titel:`,bodyPreview:`Inhalt:`,resetToDefault:`Auf Standard zurücksetzen`,titleRequired:`Titel ist erforderlich`,bodyRequired:`Inhalt ist erforderlich`,notificationLog:`Benachrichtigungsprotokoll`,showFailedOnly:`Nur fehlgeschlagene`,last24Hours:`Letzte 24 Stunden`,last7Days:`Letzte 7 Tage`,last30Days:`Letzte 30 Tage`,last90Days:`Letzte 90 Tage`,justNow:`Gerade eben`,noFailedNotifications:`Keine fehlgeschlagenen Benachrichtigungen`,noNotificationsLogged:`Keine Benachrichtigungen protokolliert`,unknownProvider:`Unbekannter Anbieter`,logTitle:`Titel`,logMessage:`Nachricht`,logError:`Fehler`,logProvider:`Anbieter: {{type}}`,logTime:`Zeit: {{time}}`,refresh:`Aktualisieren`,clearOld:`Alte löschen`,statsSummary:`Letzte {{days}} Tage:`,statsNotifications:`Benachrichtigungen`,statsSent:`{{count}} gesendet`,statsFailed:`{{count}} fehlgeschlagen`,eventTypes:{print_start:`Druck gestartet`,print_complete:`Druck abgeschlossen`,print_failed:`Druck fehlgeschlagen`,print_stopped:`Druck gestoppt`,print_progress:`Fortschritt`,printer_offline:`Drucker offline`,printer_error:`Druckerfehler`,filament_low:`Filament niedrig`,maintenance_due:`Wartung fällig`,test:`Test`},userEmail:{title:`Benachrichtigungen`,emailNotifications:`E-Mail-Benachrichtigungen`,emailNotificationsDesc:`Erhalten Sie E-Mail-Benachrichtigungen für Ihre eigenen Druckaufträge. E-Mails werden über die in der erweiterten Authentifizierung konfigurierten SMTP-Einstellungen gesendet.`,sendingTo:`Benachrichtigungen werden gesendet an`,noEmailWarning:`Ihr Konto hat keine E-Mail-Adresse. Wenden Sie sich an einen Administrator, um eine hinzuzufügen.`,printJobNotifications:`Druckauftrags-Benachrichtigungen`,printJobNotificationsDesc:`Wählen Sie aus, welche Ereignisse E-Mail-Benachrichtigungen für von Ihnen gesendete Druckaufträge auslösen.`,printJobStarts:`Druckauftrag startet`,printJobStartsDesc:`Benachrichtigt werden, wenn Ihr Druckauftrag beginnt.`,printJobFinishes:`Druckauftrag fertig`,printJobFinishesDesc:`Benachrichtigt werden, wenn Ihr Druckauftrag erfolgreich abgeschlossen wurde.`,printErrors:`Druckfehler`,printErrorsDesc:`Benachrichtigt werden, wenn Ihr Druckauftrag fehlschlägt oder auf einen Fehler stößt.`,printJobStops:`Druckauftrag gestoppt`,printJobStopsDesc:`Benachrichtigt werden, wenn Ihr Druckauftrag abgebrochen oder gestoppt wird.`,saveSuccess:`Benachrichtigungseinstellungen gespeichert.`,saveError:`Benachrichtigungseinstellungen konnten nicht gespeichert werden.`}},richTextEditor:{bold:`Fett`,italic:`Kursiv`,underline:`Unterstrichen`,bulletList:`Aufzählungsliste`,numberedList:`Nummerierte Liste`,alignLeft:`Linksbündig`,alignCenter:`Zentriert`,alignRight:`Rechtsbündig`,addLink:`Link hinzufügen`,removeLink:`Link entfernen`},externalLinks:{title:`Seitenleisten-Links`,sidebarLayout:`Seitenleiste`,sidebarLayoutDescription:`Integrierte Seiten ein- oder ausblenden, externe Links hinzufügen und Elemente ziehen, um die Seitenleisten-Navigation neu zu ordnen.`,systemPages:`Bambuddy-Seiten`,externalLinks:`Externe Links`,visibleInSidebar:`In Seitenleiste sichtbar`,hiddenFromSidebar:`In Seitenleiste ausgeblendet`,requiredInSidebar:`In Seitenleiste erforderlich`,hidePage:`Seite ausblenden`,showPage:`Seite anzeigen`,settingsCannotBeHidden:`Einstellungen können nicht ausgeblendet werden`,noLinksConfigured:`Keine externen Links konfiguriert`,deleteLink:`Link löschen`,removeCustomIcon:`Benutzerdefiniertes Symbol entfernen`,openInNewTab:`In neuem Tab öffnen`,placeholders:{linkName:`Mein Link`}},keyboardShortcuts:{title:`Tastaturkürzel`,navigation:`Navigation`,archivesSection:`Archive`,kProfilesSection:`K-Profile`,generalSection:`Allgemein`,shortcuts:{goToPrinters:`Zu Drucker gehen`,goToArchives:`Zu Archiv gehen`,goToQueue:`Zur Warteschlange gehen`,goToStats:`Zu Statistiken gehen`,goToProfiles:`Zu Cloud-Profilen gehen`,goToSettings:`Zu Einstellungen gehen`,focusSearch:`Suche fokussieren`,openUploadModal:`Upload-Modal öffnen`,clearSelection:`Auswahl löschen / Eingabe aufheben`,contextMenu:`Kontextmenü auf Karten`,refreshProfiles:`Profile aktualisieren`,newProfile:`Neues Profil`,exitSelectionMode:`Auswahlmodus beenden`,showHelp:`Diese Hilfe anzeigen`},footer:`Drücken Sie Esc oder klicken Sie außerhalb, um zu schließen`},notificationLog:{title:`Benachrichtigungsprotokoll`,events:{printStarted:`Druck gestartet`,printComplete:`Druck abgeschlossen`,printFailed:`Druck fehlgeschlagen`,printStopped:`Druck gestoppt`,progress:`Fortschritt`,printerOffline:`Drucker offline`,printerError:`Druckerfehler`,lowFilament:`Wenig Filament`,maintenanceDue:`Wartung fällig`,test:`Test`},timeAgo:{justNow:`Gerade eben`,minutesAgo:`vor {{minutes}}m`,hoursAgo:`vor {{hours}}h`}},restoreBackup:{title:`Backup wiederherstellen`,restoring:`Wird wiederhergestellt...`,restoreComplete:`Wiederherstellung abgeschlossen`,restoreFailed:`Wiederherstellung fehlgeschlagen`,importSettings:`Einstellungen aus Backup-Datei importieren`,pleaseWait:`Bitte warten Sie, während Ihre Daten wiederhergestellt werden`,clickToSelect:`Klicken Sie, um Backup-Datei auszuwählen (.json oder .zip)`,howDuplicateHandling:`So funktioniert die Duplikatbehandlung:`,categories:{printers:`Drucker`,smartPlugs:`Smart Plugs`,notificationProviders:`Benachrichtigungsanbieter`,filaments:`Filamente`,archives:`Archive`,pendingUploads:`Ausstehende Uploads`,settingsTemplates:`Einstellungen & Vorlagen`},matchingInfo:{printers:`abgeglichen nach Seriennummer`,smartPlugs:`abgeglichen nach IP-Adresse`,notificationProviders:`abgeglichen nach Name`,filaments:`abgeglichen nach Name + Typ + Marke`,archives:`abgeglichen nach Inhalts-Hash`,pendingUploads:`abgeglichen nach Dateiname`,settingsTemplates:`immer überschrieben`},replaceExisting:`Vorhandene Daten ersetzen`,keepExisting:`Vorhandene Daten behalten`,replaceDescription:`Bereits vorhandene Elemente mit Backup-Daten überschreiben`,keepDescription:`Nur Elemente wiederherstellen, die noch nicht existieren`,caution:`Vorsicht:`,cautionText:`Das Überschreiben ersetzt Ihre aktuellen Konfigurationen durch Backup-Daten. Drucker-Zugangscodes werden aus Sicherheitsgründen niemals überschrieben.`,itemsRestored:`Wiederhergestellte Elemente`,itemsSkipped:`Übersprungene Elemente`,restored:`Wiederhergestellt`,skipped:`Übersprungen (existieren bereits)`,filesLabel:`Dateien (3MF, Thumbnails, etc.)`,newApiKeysGenerated:`Neue API-Schlüssel generiert`,newApiKeysWarning:`Diese Schlüssel werden nur einmal angezeigt. Kopieren Sie sie jetzt!`,processingBackup:`Backup-Datei wird verarbeitet...`,noDataFound:`In der Backup-Datei wurden keine wiederherzustellenden Daten gefunden.`,failedToRestore:`Backup konnte nicht wiederhergestellt werden. Bitte überprüfen Sie das Dateiformat.`},backupExport:{title:`Backup exportieren`,selectData:`Zu exportierende Daten auswählen`,selectAll:`Alle auswählen`,selectNone:`Keine auswählen`,categoryDescriptions:{settings:`Sprache, Theme, Update-Einstellungen`,notifications:`ntfy, Pushover, Discord, usw.`,templates:`Benutzerdefinierte Nachrichtenvorlagen`,smartPlugs:`Tasmota-Plug-Konfigurationen`,externalLinks:`Seitenleiste Links zu externen Diensten`,printers:`Druckerinformationen (Zugangscodes ausgeschlossen)`,plateDetection:`Leere Platten-Referenzbilder`,filaments:`Filamenttypen und -kosten`,maintenance:`Benutzerdefinierte Wartungspläne`,archives:`Alle Druckdaten + Dateien (3MF, Thumbnails, Fotos)`,projects:`Projekte, BOM-Elemente und Anhänge`,pendingUploads:`Virtueller Drucker-Uploads zur Überprüfung`,apiKeys:`Webhook-API-Schlüssel (neue Schlüssel bei Import generiert)`},requiresPrinters:`Drucker müssen ausgewählt sein`,zipFileWarning:`ZIP-Datei wird erstellt.`,zipFileDescription:`Enthält alle 3MF-Dateien, Thumbnails, Zeitraffer und Fotos. Dies kann eine Weile dauern und zu einer großen Datei führen.`,includeAccessCodes:`Zugangscodes einschließen`,includeAccessCodesDescription:`Für die Übertragung auf eine andere Maschine`,includeAccessCodesWarning:`Zugangscodes werden im Klartext eingeschlossen. Bewahren Sie diese Backup-Datei sicher auf!`,categoriesSelected:`{{selectedCount}} Kategorien ausgewählt`},pendingUploads:{placeholders:{notes:`Notizen zu diesem Druck hinzufügen...`},discardUpload:`Upload verwerfen`,archiveAllUploads:`Alle Uploads archivieren`,discardAllUploads:`Alle Uploads verwerfen`,archive:`Archivieren`,timeAgo:{justNow:`Gerade eben`,minutesAgo:`vor {{minutes}}m`,hoursAgo:`vor {{hours}}h`,daysAgo:`vor {{days}}d`}},apiBrowser:{placeholders:{requestBody:`JSON-Anforderungstext...`,searchEndpoints:`Endpunkte suchen...`}},configureAmsSlot:{title:`AMS-Slot konfigurieren`,slotConfigured:`Slot konfiguriert!`,configuringSlot:`Slot wird konfiguriert:`,slotLabel:`{{ams}} – Slot {{slot}}`,searchPresets:`Voreinstellungen suchen...`,colorPlaceholder:`Farbname oder Hex (z.B. braun, FF8800)`,clearCustomColor:`Benutzerdefinierte Farbe löschen`,noCloudPresets:`Keine Cloud-Voreinstellungen. Melden Sie sich bei Bambu Cloud an, um zu synchronisieren.`,noPresetsAvailable:`Keine Voreinstellungen verfügbar. Melden Sie sich bei Bambu Cloud an oder importieren Sie lokale Profile.`,noMatchingPresets:`Keine passenden Voreinstellungen gefunden.`,custom:`Benutzerdefiniert`,builtin:`Integriert`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Einstellungen an Drucker gesendet`,filamentProfile:`Filamentprofil`,kProfileLabel:`K-Profil (Pressure Advance)`,filteringFor:`Filtern nach: {{material}}`,noKProfile:`Kein K-Profil (Standard 0.020 verwenden)`,noMatchingKProfiles:`Keine passenden K-Profile gefunden. Standard K=0.020 wird verwendet.`,otherKProfiles:`Weitere K-Profile auf diesem Drucker`,selectFilamentFirst:`Zuerst ein Filamentprofil auswählen`,kFromCalibration:`K={{value}} aus Druckerkalibrierung`,customColorLabel:`Benutzerdefinierte Farbe (optional)`,presetColors:`{{name}} Farben:`,showLessColors:`Weniger Farben anzeigen`,showMoreColors:`Mehr Farben anzeigen`,clear:`Löschen`,hexLabel:`Hex – #{{hex}}`,resetting:`Wird zurückgesetzt...`,resetSlot:`Slot zurücksetzen`,cancel:`Abbrechen`,configuring:`Wird konfiguriert...`,configureSlot:`Slot konfigurieren`},githubBackup:{title:`Git-Backup`,history:`Verlauf`,downloadBackup:`Backup herunterladen`,restoreBackup:`Backup wiederherstellen`,noBackupsYet:`Noch keine Backups`},emailSettings:{placeholders:{fromName:`Bambuddy`}},tagManagement:{searchTags:`Tags suchen...`,renameTag:`Tag umbenennen`,deleteTag:`Tag löschen`},notificationTemplates:{placeholders:{title:`Benachrichtigungstitel...`,body:`Benachrichtigungstext...`}},batchTag:{placeholders:{newTag:`Neuen Tag eingeben...`}},photoGallery:{deletePhoto:`Foto löschen`},filamentHoverCard:{copySpoolUuid:`Spulen-UUID kopieren`},kProfilesView:{hasNote:`Hat Notiz`,copyProfile:`Profil kopieren`},layout:{openMenu:`Menü öffnen`,noPermissionSystemInfo:`Sie haben keine Berechtigung zum Anzeigen von Systeminformationen`},dashboard:{dragToReorder:`Ziehen zum Neuordnen`,hideWidget:`Widget ausblenden`},notificationProviderCard:{deleteNotificationProvider:`Benachrichtigungsanbieter löschen`},fileManagerModal:{closeFileManager:`Dateimanager schließen`,sortFiles:`Dateien sortieren`,goToParentFolder:`Zum übergeordneten Ordner gehen`,threeView:`3D-Ansicht`},embeddedCameraViewer:{refreshStream:`Stream aktualisieren`,close:`Schließen`,zoomOut:`Verkleinern`,resetZoom:`Zoom zurücksetzen`,zoomIn:`Vergrößern`,dragToResize:`Ziehen zum Größe ändern`},timelapseViewer:{skipBack5s:`5s zurückspringen`,skipForward5s:`5s vorspringen`},notificationProviders:{descriptions:{email:`SMTP-E-Mail-Benachrichtigungen`,telegram:`Benachrichtigungen über Telegram-Bot`,discord:`An Discord-Kanal über Webhook senden`,ntfy:`Kostenlose, selbst hostbare Push-Benachrichtigungen`,pushover:`Einfache, zuverlässige Push-Benachrichtigungen`,callmebot:`Kostenlose WhatsApp-Benachrichtigungen über CallMeBot`,webhook:`Generischer HTTP POST zu beliebiger URL`}},logViewer:{searchPlaceholder:`Nachricht oder Logger-Name suchen...`,noLogEntries:`Keine Logeinträge gefunden`},switchbarPopover:{noSwitchesInSwitchbar:`Keine Schalter in Schalterleiste`},projectPageModal:{placeholders:{title:`Titel`,designer:`Designer`,license:`Lizenz`,description:`Beschreibung eingeben...`,profileTitle:`Profil-Titel`,profileDescription:`Profilbeschreibung...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`Wartend`,justNow:`Gerade eben`,now:`Jetzt`,minsAgo:`vor {{count}}m`,inMins:`in {{count}}min`,hoursAgo:`vor {{count}}h`,inHours:`in {{count}}Std`,daysAgo:`vor {{count}}d`,inDays:`in {{count}}T`},spoolbuddy:{nav:{dashboard:`Übersicht`,ams:`AMS`,inventory:`Inventar`,writeTag:`Schreiben`,settings:`Einstellungen`},status:{nfcReady:`NFC bereit`,nfcOff:`NFC aus`,offline:`Offline`,online:`Online`,noPrinters:`Keine Drucker`,deviceOffline:`Gerät offline`,waitingConnection:`Warte auf Geräteverbindung...`,systemReady:`System bereit`,status:`Status`},dashboard:{readyToScan:`Bereit zum Scannen`,idleMessage:`Spule auf die Waage legen zum Identifizieren`,nfcHint:`NFC-Tag wird automatisch gelesen`,device:`Gerät`,syncWeight:`Gewicht sync.`,weightSynced:`Synchronisiert!`,unknownTag:`Unbekannter Tag`,newTag:`Neuer Tag erkannt`,onScale:`auf der Waage`,linkSpool:`Mit Spule verknüpfen`,linkTagTitle:`Tag mit Spule verknüpfen`,linkTag:`Tag verknüpfen`,selectSpool:`Spule zum Verknüpfen auswählen:`,noUntagged:`Keine Spulen ohne Tags gefunden`,tagDetected:`Tag erkannt`,noTag:`Kein Tag`,tagId:`Tag`,grossWeight:`Bruttogewicht`,spoolSize:`Spulengröße`,close:`Schließen`,currentSpool:`Aktuelle Spule`,plateReady:`Druckplatte bereit: {{name}}`,plateReadyLabel:`Bereit-zum-Quittieren-Liste`,plateClearAction:`Frei`,plateClearedToast:`Druckplatte als geleert markiert`,plateClearFailed:`Druckplatte konnte nicht als geleert markiert werden`},modal:{spoolDetected:`Spule erkannt`,assignToAms:`AMS zuweisen`,syncWeight:`Gewicht sync.`,weightSynced:`Synchronisiert!`,syncing:`Synchronisiere...`,newTagDetected:`Neuer Tag erkannt`,addToInventory:`Zum Inventar hinzufügen`,assignToAmsTitle:`AMS zuweisen`,selectSlot:`Slot auswählen`,assign:`Zuweisen`,assigning:`Zuweisen...`,assignSuccess:`Zugewiesen!`,assignPendingInsert:`Zugewiesen. Slot wird beim Einsetzen der Spule konfiguriert.`,assignError:`Fehler beim Zuweisen. Bitte erneut versuchen.`,noPrinterSelected:`Drucker auswählen...`,noAmsDetected:`Kein AMS an diesem Drucker erkannt`,slot:`Slot`},weight:{noReading:`Kein Messwert`,stable:`Stabil`,measuring:`Messen...`,tare:`Tarieren`,calibrate:`Kalibrieren`},spool:{remaining:`Verbleibend`,material:`Material`,brand:`Marke`,color:`Farbe`,coreWeight:`Kern`,labelWeight:`Etikett`,scaleWeight:`Waage`,netWeight:`Netto`,lastUsed:`Zuletzt verwendet`,unknownColor:`Unbekannte Farbe`},ams:{noData:`Kein AMS erkannt`,connectAms:`AMS anschließen um Filament-Slots zu sehen`,noPrinter:`Kein Drucker ausgewählt`,selectPrinter:`Drucker in der oberen Leiste auswählen`,printerDisconnected:`Drucker getrennt`,humidity:`Feuchtigkeit`,level:`Stufe`,active:`Aktiv`,slot:`Slot`,empty:`Leer`},inventory:{search:`Spulen suchen...`,empty:`Keine Spulen im Inventar`,noResults:`Keine passenden Spulen`,spools:`Spulen`,addSpool:`Spule hinzufügen`},settings:{tabDevice:`Gerät`,tabDisplay:`Anzeige`,tabScale:`Waage`,tabUpdates:`Aktualisierungen`,nfcReader:`NFC-Leser`,type:`Typ`,connection:`Verbindung`,notConnected:`N/V`,deviceInfo:`Geräteinfo`,hostname:`Host`,uptime:`Betriebszeit`,systemConfig:`Backend & Auth`,backendUrl:`Bambuddy Backend URL`,apiToken:`API-Token`,apiTokenPlaceholder:`API-Token eingeben`,saveConfig:`Konfiguration speichern`,systemQueued:`Konfiguration in Warteschlange.`,nfcDiagnostic:`NFC-Diagnose`,scaleDiagnostic:`Waagen-Diagnose`,readTagDiagnostic:`Tag-Lese-Diagnose`,testNfc:`Leser testen`,testScale:`Genauigkeit testen`,testReadTag:`Tag lesen`,systemFieldsRequired:`Backend-URL ist erforderlich.`,brightness:`Helligkeit`,saved:`Gespeichert`,noBacklight:`Keine DSI-Hintergrundbeleuchtung erkannt. Helligkeitssteuerung erfordert ein DSI-Display.`,screenBlank:`Bildschirm-Abschaltzeit`,screenBlankDesc:`Bildschirm schaltet sich nach Inaktivität ab. Zum Aufwecken berühren.`,displayNote:`Helligkeit wird als Software-Filter angewendet.`,scaleCalibration:`Waagen-Kalibrierung`,currentWeight:`Aktuelles Gewicht`,tareOffset:`Tara`,calFactor:`Faktor`,knownWeight:`Bekanntes Gewicht`,calStep1:`Alle Gegenstände von der Waage entfernen und Nullpunkt setzen.`,calStep2:`Bekanntes Gewicht auf die Waage legen.`,setZero:`Nullpunkt setzen`,calibrateNow:`Kalibrieren`,calibrated:`Kalibriert`,tareSet:`Tara-Befehl gesendet. Warte auf Gerät...`,tareComplete:`Tara abgeschlossen!`,tareTimedOut:`Tara-Zeitüberschreitung — läuft der SpoolBuddy-Daemon?`,tareFailed:`Tara-Befehl fehlgeschlagen`,zeroSet:`Nullpunkt gesetzt. Bekanntes Gewicht auf die Waage legen.`,calibrationDone:`Kalibrierung abgeschlossen!`,calibrationFailed:`Kalibrierung fehlgeschlagen`,lastCalibrated:`Zuletzt kalibriert`,stable:`Stabil`,settling:`Stabilisierung...`,firmware:`Firmware`,scale:`Waage`,noDevice:`Kein SpoolBuddy-Gerät gefunden`,daemonVersion:`Daemon-Version`,currentVersion:`Aktuell`,versionPending:`Warte auf Daemon...`,checking:`Prüfe...`,checkUpdates:`Nach Updates suchen`,updateAvailable:`Update verfügbar`,updateInstructions:`Update per SSH: SpoolBuddy-Installationsskript ausführen.`,upToDate:`Aktuell`,includeBeta:`Beta-Versionen einschließen`},writeTag:{tabExisting:`Vorhandene Spule`,tabNew:`Neue Spule`,tabReplace:`Tag ersetzen`,searchPlaceholder:`Suche nach Material, Farbe, Marke...`,noUntaggedSpools:`Keine Spulen ohne Tags`,noTaggedSpools:`Keine Spulen mit Tags`,selectSpool:`Spule auswählen, dann einen NTAG auf den Leser legen`,placeTag:`NTAG auf den Leser legen`,tagReady:`Tag erkannt — bereit zum Schreiben`,writeTag:`Tag beschreiben`,replaceTag:`Tag ersetzen`,writing:`Tag wird beschrieben...`,waiting:`Warte auf SpoolBuddy...`,writeSuccess:`Tag erfolgreich beschrieben!`,writeFailed:`Schreiben fehlgeschlagen`,queueFailed:`Schreibbefehl konnte nicht eingereiht werden`,tryAgain:`Erneut versuchen`,cancel:`Abbrechen`,replaceWarning:`Alter Tag wird getrennt. Neuer Tag ersetzt ihn.`,deviceOffline:`SpoolBuddy ist offline`,material:`Material`,colorName:`Farbname`,color:`Farbe`,brand:`Marke`,weight:`Gewicht (g)`,createSpool:`Spule erstellen`,creating:`Wird erstellt...`,spoolCreated:`Spule erstellt! Bereit zum Schreiben.`,createFailed:`Spule konnte nicht erstellt werden`,incompleteDataWarning:`Tag mit unvollständigen Spoolman-Daten geschrieben`},quickMenu:{printerPower:`Drucker-Strom`,systemControls:`System`,restartDaemon:`Daemon neustarten`,restartBrowser:`Browser neustarten`,reboot:`Neustart`,shutdown:`Herunterfahren`,swipeToClose:`Nach unten wischen zum Schließen`,confirmTitle:`Bestätigen`,confirmShutdown:`Möchten Sie das SpoolBuddy wirklich herunterfahren? Sie benötigen physischen Zugang, um es wieder einzuschalten.`,confirmReboot:`Möchten Sie das SpoolBuddy wirklich neu starten?`,confirmRestartDaemon:`SpoolBuddy-Daemon neustarten? NFC und Waage sind vorübergehend nicht verfügbar.`,confirmRestartBrowser:`Kiosk-Browser neustarten? Das Display wird kurz schwarz.`,confirm:`Bestätigen`,confirmPlugOn:`{{name}} einschalten?`,confirmPlugOff:`{{name}} ausschalten?`,turnOn:`Einschalten`,turnOff:`Ausschalten`}},diagnostic:{modalTitle:`Verbindungsdiagnose — {{name}}`,running:`Diagnose läuft...`,runningElapsed:`Diagnose läuft... ({{elapsed}}s)`,waitingForReportHint:`Warten darauf, dass der Drucker einen Statusbericht sendet — kann bis zu {{max}} Sekunden dauern.`,runFailed:`Diagnose konnte nicht ausgeführt werden: {{error}}`,retry:`Erneut ausführen`,runButton:`Diagnose ausführen`,sectionTitle:`Verbindungsdiagnose`,sectionDescription:`Prüfen, warum ein Drucker keine Verbindung herstellt oder nicht druckt — Port-Erreichbarkeit, LAN-Entwicklermodus, Docker-Netzwerkmodus und Zugangsdaten.`,noPrinters:`Keine Drucker konfiguriert.`,overall:{ok:`Keine Probleme gefunden — die Druckerverbindung sieht gut aus.`,warnings:`Der Drucker sollte funktionieren, aber einige Punkte erfordern Aufmerksamkeit.`,problems:`Probleme gefunden, die erklären, warum der Drucker keine Verbindung herstellt oder nicht druckt.`},check:{port_mqtt:{title:`Steuerungsport (MQTT 8883)`,pass:`Erreichbar — der Drucker akzeptiert Steuerungsverbindungen.`,fail:`Port 8883 ist nicht erreichbar. Der Drucker ist ausgeschaltet, hat eine andere IP-Adresse oder eine Firewall blockiert ihn. Überprüfen Sie die Drucker-IP und dass nichts Port 8883 blockiert.`},port_ftps:{title:`Dateiübertragungsport (FTPS 990)`,pass:`Erreichbar — das Senden von Druckdateien funktioniert.`,warn:`Port 990 ist nicht erreichbar. Die Überwachung funktioniert möglicherweise weiterhin, aber das Senden von Drucken an den Drucker schlägt fehl. Stellen Sie sicher, dass Port 990 nicht blockiert ist.`,warn_no_tls:`Port 990 ist offen, aber der Dateidienst des Druckers schließt den TLS-Handshake nicht ab. Druckdateien, Vorschaubilder und Zeitraffer können nicht abgerufen werden, daher bleiben Archive leer. Starten Sie den Drucker neu — den Port freizugeben hilft hier nicht.`},external_storage:{title:`Gesendete Dateien auf externem Speicher speichern (Installationsschritt 4)`,pass:`Der Drucker meldet, dass diese Option aktiv ist — gesendete Dateien werden auf der SD-Karte gespeichert und Archive enthalten Vorschaubilder und Slicer-Metadaten.`,fail:`Der Drucker meldet, dass diese Option deaktiviert ist. Aktivieren Sie "Gesendete Dateien auf externem Speicher speichern" — bei neuer Firmware (P2S 01.02 / Bambu Studio 2.6+) liegt der Schalter in den Druckeinstellungen des Druckers, bei älteren Versionen im Geräte-Tab von Bambu Studio / OrcaSlicer. Ohne diese Option fehlen jedem archivierten Druck Vorschaubild und Slicer-Metadaten.`,skip:`Nicht geprüft — eine aktive MQTT-Verbindung ist erforderlich. Bei älteren Slicern, in denen diese Einstellung nur im Slicer existiert, meldet sie der Drucker nicht — diese Prüfung besteht auch dann, wenn die Option deaktiviert ist. Prüfen Sie Installationsschritt 4 in diesem Fall manuell.`,skip_unsupported_model:`Dieses Modell hat einen SD-Slot, aber keine Möglichkeit, die Option zu aktivieren — die aktuelle P1-Firmware zeigt den Schalter in Bambu Studio nicht an und der Drucker hat kein Display. Hier gibt es nichts zu beheben; archivierten Drucken fehlen möglicherweise Vorschaubilder und Slicer-Metadaten, bis Bambu Lab dies per Firmware unterstützt.`,fail_no_media:`Die Option ist aktiviert, aber der Drucker meldet weder Karte noch Stick im Steckplatz, daher können gesendete Dateien nirgends abgelegt werden. Legen Sie einen ein und drucken Sie erneut — bis dahin fehlen jedem archivierten Druck Vorschaubild und Slicer-Metadaten.`,warn_internal_storage:`Die Option ist aktiviert und ein Speicher ist vorhanden, aber der letzte Druck landete dennoch im internen Speicher des Druckers, den Bambuddy nicht lesen kann. Bei der H2-Serie, dem P2S und dem X2D sendet die Schaltfläche "Drucken" in Bambu Studio unabhängig von dieser Option immer dorthin. Drucke werden mit Namen und Zeiten archiviert, aber ohne Vorschaubild und Slicer-Metadaten. Für vollständige Archive den Druck aus Bambuddy starten oder in OrcaSlicer slicen — oder in Bambu Studio "Senden" mit "Extern" verwenden und den Druck danach starten.`,warn_internal_history:`Die Option ist aktiv und Speicher vorhanden, aber der letzte Druck lief aus einer Datei, die bereits auf dem Drucker lag — ein erneuter Druck über sein Display, ein Start aus Handy oder eine früher gesendete Datei. Diese Bibliothek liegt im internen Speicher, den Bambuddy nicht lesen kann, und keine Einstellung ändert das, denn für diesen Druck wurde nichts gesendet. Er wird weiterhin mit Namen und Zeiten archiviert, nur ohne Vorschaubild und Slicer-Metadaten. Für vollständige Archive Drucke aus Bambuddy starten oder aus dem Slicer senden.`},port_rtsps:{title:`Kameraport ({{protocol}} {{port}})`,pass:`Erreichbar — der Kamerastream funktioniert.`,warn:`Port {{port}} ist nicht erreichbar. Die Live-Kameraansicht funktioniert nicht. Dies betrifft das Drucken nicht.`},macos_local_network:{title:`macOS-Berechtigung „Lokales Netzwerk“`,pass:`macOS erlaubt Bambuddy den Zugriff auf das lokale Netzwerk.`,warn_unsigned:`Das Python, das Bambuddy ausführt, hat keine Code-Signatur. Damit hat macOS nichts, woran es die Berechtigung „Lokales Netzwerk“ binden könnte, und verwirft jede Verbindung zum Drucker stillschweigend — ohne Fehler und ohne Nachfrage. Führe das Bambuddy-Update-Skript (install/update_macos.sh) aus, das die Signatur setzt, und starte Bambuddy anschließend neu. Interpreter: {{executable}}`,warn_permission:`Wenn der Drucker eingeschaltet und unter dieser Adresse erreichbar ist, öffne Systemeinstellungen > Datenschutz & Sicherheit > Lokales Netzwerk und stelle sicher, dass das Python von Bambuddy aktiviert ist. macOS verwirft lokale Verbindungen sonst stillschweigend, und ein Python-Update kann die alte Berechtigung zurücklassen.`},network_mode:{title:`Container-Netzwerkmodus`,genericRuntime:`einem Container`,pass:`Läuft in {{runtime}} mit Host-Netzwerk.`,warn:`Bambuddy läuft in {{runtime}} mit Bridge-Netzwerk. Die Druckererkennung und der virtuelle Drucker benötigen den Host-Netzwerkmodus — erstellen Sie den Container mit Host-Netzwerk neu ("network_mode: host" in docker-compose, "--network=host" bei Podman).`,skip:`Läuft nicht in einem Container — nicht zutreffend.`,skip_unknown:`Bambuddy läuft in {{runtime}}, der Netzwerkmodus konnte jedoch nicht ermittelt werden. Falls die Druckererkennung oder der virtuelle Drucker nicht funktionieren, erstellen Sie den Container mit Host-Netzwerk neu.`,skip_system_container:`Bambuddy läuft in einem {{runtime}}-Systemcontainer, der wie eine virtuelle Maschine direkt im LAN liegt — nicht zutreffend.`},subnet:{title:`Netzwerk-Subnetz`,pass:`Drucker und Bambuddy befinden sich im selben Subnetz.`,warn:`Der Drucker ({{printer_ip}}) und Bambuddy ({{host_ip}}) befinden sich in unterschiedlichen Subnetzen. Sie können sich möglicherweise nicht erreichen, sofern kein Routing zwischen den Subnetzen konfiguriert ist.`,skip:`Subnetz konnte nicht ermittelt werden — übersprungen.`},mqtt_auth:{title:`Drucker-Zugangsdaten`,pass:`Der Drucker hat die Verbindung akzeptiert.`,fail:`Der Drucker ist erreichbar, aber Bambuddy ist nicht mit ihm verbunden. Höchstwahrscheinlich ist der Zugangscode oder die Seriennummer falsch — der Zugangscode ändert sich bei jedem Umschalten von „Nur LAN“ oder des Entwicklermodus, kopieren Sie ihn also erneut vom Druckerbildschirm. Ein Drucker, der gerade neu startet oder bereits die maximale Anzahl gleichzeitiger Verbindungen erreicht hat, sieht genauso aus.`,fail_auth_rejected:`Der Drucker hat die Zugangsdaten von Bambuddy abgelehnt. Der Zugangscode oder die Seriennummer ist falsch — der Zugangscode ändert sich bei jedem Umschalten von „Nur LAN“ oder des Entwicklermodus. Kopieren Sie ihn erneut vom Druckerbildschirm und speichern Sie ihn in den Druckereinstellungen.`,skip:`Nicht geprüft — der Drucker konnte nicht erreicht werden.`},developer_mode:{title:`LAN-Entwicklermodus`,pass:`Der Entwicklermodus ist aktiviert.`,fail:`Der Entwicklermodus ist am Drucker AUS. Aktivieren Sie ihn in den LAN-Einstellungen des Druckers — und bestätigen Sie mit OK. Ohne ihn starten Drucke nicht.`,skip:`Konnte nicht geprüft werden — erfordert eine aktive Verbindung zum Drucker.`},printer_publishing:{title:`Drucker sendet Statusmeldungen`,pass:`Der Drucker sendet Statusmeldungen — AMS, Filamente und K-Profile werden korrekt zum Slicer gespiegelt.`,fail:`Der MQTT-Broker hat die Verbindung akzeptiert, der Drucker sendet aber keine Statusmeldungen. Fast immer liegt eine falsche oder falsch geschriebene Seriennummer vor — das Topic device/<serial>/report unterscheidet Groß- und Kleinschreibung. Prüfen Sie die Seriennummer in den Druckereinstellungen gegen die Anzeige am Drucker.`,skip:`Konnte nicht geprüft werden — erfordert eine aktive Verbindung zum Drucker.`}}},systemHealth:{sectionTitle:`Systemzustand`,sectionDescription:`Durchsucht aktuelle Logs nach bekannten Problemen, die du meist selbst beheben kannst, bevor daraus ein Support-Ticket wird.`,rescan:`Erneut prüfen`,clean:`Keine bekannten Probleme in den letzten {{times}} Log-Einträgen gefunden.`,logUnavailable:`Die Protokollierung in Dateien ist deaktiviert, daher können keine Logs durchsucht werden. Aktiviere die Datei-Protokollierung, um diese Prüfung zu nutzen.`,learnMore:`Lösung anzeigen`,fixLabel:`Lösung:`,occurrences:`{{times}}× aufgetreten — zuletzt um {{lastSeen}}`,category:{layer8:`Das kannst du beheben`,environment:`Umgebung`,bug:`Bitte melden`},signature:{"ftp-auth-rejected":{name:`Drucker hat den Zugriffscode abgelehnt`,cause:`Der Drucker hat die Anmeldung für die Dateiübertragung abgelehnt. Der Zugriffscode ist falsch oder hat sich nach dem Umschalten des Entwicklermodus geändert.`,fix:`Kopiere den Zugriffscode erneut vom Druckerbildschirm (LAN-Einstellungen) und aktualisiere ihn in den Druckereinstellungen in Bambuddy.`},"ftp-connection-timeout":{name:`Zeitüberschreitung bei der Dateiübertragung`,cause:`Bambuddy konnte den Dateiübertragungs-Port des Druckers (FTPS 990) nicht erreichen. Der Port ist blockiert, oder der Drucker ist aus oder in einem anderen Subnetz.`,fix:`Stelle sicher, dass Port 990 zwischen Bambuddy und dem Drucker nicht blockiert wird und beide im selben Netzwerk sind.`},"ftp-ssl-error":{name:`Sicherer Dateiübertragungs-Handshake fehlgeschlagen`,cause:`Der Dateidienst des Druckers antwortet auf Port 990 ohne TLS. Sein Dateiserver hat sich aufgehängt — ein Fehler im Drucker, kein Firewall- oder Firmware-Problem.`,fix:`Starte den Drucker neu. Bis dahin lassen sich Druckdateien, Vorschaubilder und Timelapses nicht abrufen; das Drucken selbst ist nicht betroffen.`},"bambu-cloud-captcha":{name:`Bambu Cloud verlangt ein CAPTCHA`,cause:`Der Missbrauchsschutz von Bambu prüft dieses Netzwerk, daher kann keine Bambu-Cloud-Anmeldung abgeschlossen werden. Das hängt an der öffentlichen IP-Adresse, nicht an deinem Konto oder dieser Installation.`,fix:`Warte ab — normalerweise löst es sich innerhalb weniger Stunden, wiederholte Anmeldeversuche verlängern es. Zwischenzeitlich kannst du dich mit einem Zugriffstoken aus einer Browser-Sitzung anmelden.`},"mqtt-connection-flapping":{name:`Druckerverbindung bricht ständig ab`,cause:`Die Steuerverbindung (MQTT 8883) trennt und verbindet sich wiederholt — meist wegen einer schwachen Netzwerkverbindung oder eines teilweise blockierten Ports.`,fix:`Prüfe das WLAN-Signal am Drucker, bevorzuge eine Kabelverbindung und stelle sicher, dass Port 8883 zuverlässig erreichbar ist.`},"camera-connection-refused":{name:`Kamera-Stream nicht erreichbar`,cause:`Die Live-Kamera war auf Port RTSPS 322 nicht erreichbar. Der Port ist blockiert, oder die Kamera bzw. die LAN-Liveansicht ist am Drucker deaktiviert.`,fix:`Aktiviere Kamera und LAN-Liveansicht am Drucker und stelle sicher, dass Port 322 nicht blockiert ist. Das Drucken ist davon nicht betroffen.`},"database-locked":{name:`Datenbank-Schreibkonflikte`,cause:`Die SQLite-Datenbank meldet unter Last "database is locked"-Fehler — häufig beim Betrieb mehrerer Drucker gleichzeitig.`,fix:`Stelle Bambuddy auf eine externe PostgreSQL-Datenbank um. Siehe die PostgreSQL-Anleitung in der Dokumentation.`}}},vpDiagnostic:{title:`Einrichtungsprüfung — {{name}}`,runButton:`Einrichtungsprüfung ausführen`,running:`Einrichtungsprüfung läuft...`,runFailed:`Einrichtungsprüfung konnte nicht ausgeführt werden: {{error}}`,retry:`Erneut prüfen`,overall:{ok:`Alle Prüfungen bestanden — dieser virtuelle Drucker ist korrekt eingerichtet.`,warnings:`Der virtuelle Drucker sollte funktionieren, aber einige Punkte brauchen Aufmerksamkeit.`,problems:`Es wurden Probleme gefunden, die erklären, warum der Slicer diesen virtuellen Drucker nicht sehen oder nutzen kann.`},check:{enabled:{title:`Virtueller Drucker aktiviert`,fail:`Dieser virtuelle Drucker ist ausgeschaltet. Schalten Sie ihn ein, damit er erkennbar wird.`},running:{title:`Dienste laufen`,fail:`Der virtuelle Drucker ist aktiviert, aber seine Dienste laufen nicht. Prüfen Sie das Bambuddy-Protokoll — meist stoppt sie ein Bind-IP-Konflikt oder ein Berechtigungsfehler.`},bind_interface:{title:`Bind-Netzwerkschnittstelle`,fail:`Die Bind-Schnittstelle ist nicht gesetzt oder existiert auf diesem Host nicht mehr. Wählen Sie im Dropdown "Bind-Schnittstelle" eine aktuelle Schnittstelle.`},access_code:{title:`Zugangscode gesetzt`,fail:`Es ist kein Zugangscode gesetzt. Dem Slicer muss derselbe 8-stellige Zugangscode angegeben werden, den Sie hier festlegen.`},target_printer:{title:`Zieldrucker`,fail:`Es ist kein Zieldrucker ausgewählt. Der Proxy-Modus benötigt einen echten Drucker zum Weiterleiten.`,warn:`Der Zieldrucker ist gerade offline — die Weiterleitung wird fortgesetzt, sobald er sich wieder verbindet.`},port_ftps:{title:`Datei-Upload-Dienst (Port {{port}})`,fail:`Auf Port {{port}} der Bind-IP lauscht nichts, daher kann der Slicer keine Dateien hochladen. Ursache ist meist ein Port-Konflikt auf dieser Schnittstelle.`},port_mqtt:{title:`Steuerungsdienst (Port {{port}})`,fail:`Auf Port {{port}} der Bind-IP lauscht nichts, daher kann der Slicer sich nicht verbinden oder den Status anzeigen.`},port_bind:{title:`Erkennungsdienst (Port {{port}})`,fail:`Auf Port {{port}} der Bind-IP lauscht nichts, daher schlägt der Erkennungs-Handshake des Slicers fehl.`},privileged_ports:{title:`Bindung an privilegierte Ports`,fail:`Port {{port}} liegt unter 1024 und dieser Dienst darf ihn nicht belegen — deshalb lauscht oben nichts. Fügen Sie AmbientCapabilities=CAP_NET_BIND_SERVICE in /etc/systemd/system/bambuddy.service ein und starten Sie neu, oder führen Sie "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))" aus. Unter Docker ergänzen Sie cap_add: [NET_BIND_SERVICE].`},certificate:{title:`TLS-Zertifikat`,pass:`Zertifikat bereit. Stellen Sie sicher, dass das Bambuddy-CA-Zertifikat (oben) in den Vertrauensspeicher Ihres Slicers importiert ist.`,fail:`Das TLS-Zertifikat für diesen virtuellen Drucker fehlt. Prüfen Sie, ob das Bambuddy-Datenverzeichnis beschreibbar ist.`}}},bugReport:{logHealthSummary:`Bekannte Probleme in deinen Logs gefunden`,logHealthIntro:`Aktuelle Logs entsprechen bekannten Problemen. Sieh dir die Lösungen unten an — sie zu beheben könnte dein Problem ohne Fehlerbericht lösen. Du kannst unten trotzdem einen Bericht senden.`,title:`Fehler melden`,description:`Beschreibung`,descriptionPlaceholder:`Was ist schiefgelaufen? Bitte beschreiben Sie das Problem...`,email:`E-Mail (optional)`,emailPlaceholder:`ihre@email.de`,emailPrivacy:`Falls angegeben, wird Ihre E-Mail in einem eingeklappten Abschnitt des GitHub-Issues aufgeführt, damit der Betreuer sich melden kann.`,screenshot:`Screenshot`,uploadOrPaste:`Bild hochladen, einfügen oder ziehen`,dataCollectedSummary:`Welche Daten werden im Bericht gesendet?`,dataIncluded:`Enthalten:`,dataIncludedList:`App-Version, Betriebssystem, Architektur, Python-Version, Datenbankstatistiken (nur Anzahl), Druckermodelle, Düsenanzahl, Firmware-Versionen, Verbindungsstatus, Integrationsstatus (Spoolman, MQTT, HA), nicht-sensible Einstellungen, Netzwerkschnittstellenanzahl, Docker-Details, Abhängigkeitsversionen.`,dataNeverIncluded:`Nie enthalten:`,dataNeverIncludedList:`Druckernamen, Seriennummern, Zugangscodes, Passwörter, IP-Adressen, E-Mail-Adressen, API-Schlüssel, Tokens, Webhook-URLs, Hostnamen oder Benutzernamen.`,submit:`Absenden`,startLogging:`Debug-Protokollierung starten`,stepEnableLogging:`Debug-Protokollierung aktiviert`,stepReproduce:`Problem jetzt reproduzieren`,stepStopLogging:`Stoppen & Bericht senden`,stopAndSubmit:`Stoppen & Senden`,maxDuration:`Stoppt automatisch nach {{minutes}} Min.`,stoppingLogs:`Protokolle sammeln & senden...`,submitting:`Fehlerbericht wird gesendet...`,submittingStepConnection:`Drucker-Verbindungsprüfungen werden ausgeführt`,submittingStepVirtualPrinters:`Setup-Prüfungen für virtuelle Drucker werden ausgeführt`,submittingStepLogScan:`Aktuelle Protokolle werden auf bekannte Probleme überprüft`,submittingStepSubmit:`Bericht wird an GitHub gesendet`,submitSuccess:`Fehlerbericht erfolgreich gesendet!`,submitFailed:`Fehlerbericht konnte nicht gesendet werden`,diagnosticChecking:`Druckerverbindungen werden geprüft...`,diagnosticHealthy:`Verbindungsprüfung bestanden — keine Probleme an Ihren Druckern gefunden.`,diagnosticSummary:`{{problems}} von {{total}} Druckern haben Verbindungsprobleme`,diagnosticIntro:`Einer oder mehrere Drucker haben ein Verbindungsproblem, das die Ursache Ihres Problems sein könnte. Klappen Sie einen Drucker unten auf, um die Lösung zu sehen — sie zu beheben könnte das Problem ohne Fehlerbericht lösen. Sie können unten dennoch einen Bericht senden.`,thankYou:`Vielen Dank!`,submitted:`Ihr Fehlerbericht wurde eingereicht.`,viewIssue:`Issue ansehen`,closeKeepsRecording:`Sie können dieses Fenster schließen, während Sie das Problem reproduzieren — die Aufzeichnung läuft weiter, und beim erneuten Öffnen sind Sie wieder hier.`,resumeRecording:`Fehlerbericht zeichnet auf — {{elapsed}}. Zum Abschließen klicken.`,resumeReport:`Bericht fortsetzen`,unexpectedError:`Ein unerwarteter Fehler ist aufgetreten`},failureDetection:{title:`KI-Fehlererkennung`,description:`Überwacht Drucke über eine selbst gehostete Obico-ML-API und reagiert automatisch auf erkannte Fehldrucke.`,mlUrl:`Obico-ML-API-URL`,mlUrlHint:`Basis-URL deines selbst gehosteten Obico-ml_api-Containers (z. B. http://192.168.1.10:3333).`,mlToken:`ML-API-Token (optional)`,mlTokenPlaceholder:`Leer lassen, wenn der Server ohne ML_API_TOKEN läuft`,mlTokenHint:`Muss mit der Umgebungsvariable ML_API_TOKEN deines Obico-ml_api-Containers übereinstimmen. Leer lassen, wenn der Container ohne Token läuft.`,test:`Testen`,testSuccess:`ML-API erreichbar und funktionsfähig.`,testSuccessTokenUnknown:`ML-API erreichbar und funktionsfähig. Das Token konnte nicht geprüft werden.`,testFailed:`ML-API konnte nicht erreicht werden.`,sensitivity:`Empfindlichkeit`,sensitivityLow:`Niedrig (weniger Fehlalarme)`,sensitivityMedium:`Mittel (ausgewogen)`,sensitivityHigh:`Hoch (frühe Erkennung, mehr Fehlalarme)`,sensitivityHint:`Passt die Konfidenz-Schwellwerte an, die Warnungen und Fehler auslösen.`,action:`Aktion bei erkanntem Fehler`,actionNotify:`Nur benachrichtigen`,actionPause:`Druck pausieren`,actionPauseOff:`Pausieren und Strom abschalten`,pollInterval:`Prüfintervall (Sekunden)`,pollIntervalHint:`Wie oft jeder Drucker während eines laufenden Drucks geprüft wird. Minimum 5 s, Maximum 120 s.`,externalUrlMissing:`Externe URL ist nicht gesetzt.`,externalUrlHint:`Die ML-API ruft das Kamera-Snapshot per URL ab. Setze die externe URL in den allgemeinen Einstellungen, damit der ML-API-Container Bambuddy erreichen kann.`,perPrinterTitle:`Überwachte Drucker`,perPrinterHint:`Wähle, welche Drucker vom Erkennungsdienst überwacht werden.`,monitorAll:`Alle verbundenen Drucker überwachen`,statusTitle:`Status`,serviceRunning:`Dienst läuft`,thresholds:`Niedrig / Hoch-Schwellwerte`,activePrinters:`Aktive Drucke`,noActivePrints:`Derzeit laufen keine Drucke.`,historyTitle:`Letzte Erkennungen`,noHistory:`Noch keine Erkennungen.`},makerworld:{title:`MakerWorld`,description:`Füge eine MakerWorld-Modell-URL ein, um es direkt aus Bambuddy zu importieren und zu drucken — ohne die Bambu Handy App zu öffnen.`,pasteUrlHeader:`Von MakerWorld importieren`,pasteUrlPlaceholder:`https://makerworld.com/de/models/… oder beliebigen MakerWorld-Link einfügen`,resolveButton:`Laden`,signInRequiredTitle:`Bambu-Cloud-Anmeldung für Download erforderlich`,signInRequiredBody:`Modell-Details können anonym angezeigt werden, aber MakerWorld verlangt eine Bambu-Cloud-Anmeldung zum Herunterladen der 3MF-Dateien.`,signInExpiredTitle:`Bambu-Cloud-Anmeldung abgelaufen`,signInExpiredBody:`Sie sind weiterhin bei Bambuddy angemeldet, aber Bambu Lab akzeptiert das gespeicherte Token nicht mehr, daher schlagen Downloads fehl. Melden Sie sich erneut bei Bambu Cloud an.`,openCloudSettings:`Cloud-Einstellungen öffnen`,untitledModel:`Unbenanntes Modell`,byCreator:`von {{name}}`,downloadsCount:`{{count}} Downloads`,licensePrefix:`Lizenz`,alreadyImported:`Bereits in Bibliothek`,openOnMakerworld:`Auf MakerWorld öffnen`,alreadyInLibrary:`Dieses Modell ist bereits in deiner Bibliothek — zu finden im Dateimanager → MakerWorld`,importSuccess:`{{filename}} importiert — gespeichert im Dateimanager → MakerWorld`,platesHeader:`Platten ({{count}})`,plateDefaultName:`Platte {{n}}`,materialCount:`{{count}} Filamente`,amsRequired:`AMS erforderlich`,slicedFor:`Gesliced für {{printer}}`,alsoCompatible:`Auch kompatibel: {{printers}}`,importToLibrary:`Speichern`,sliceIn:`Speichern & in {{slicer}} öffnen`,disclaimer:`Die MakerWorld-Integration verwendet von der Community dokumentierte API-Endpunkte. Bambuddy ist nicht mit MakerWorld oder Bambu Lab verbunden oder von diesen unterstützt.`,lastImportSuccess:`In deine Bibliothek importiert`,lastImportAlreadyInLibrary:`Bereits in deiner Bibliothek`,viewInLibrary:`Im Dateimanager anzeigen`,openInBambuStudio:`In Bambu Studio öffnen`,openInOrcaSlicer:`In OrcaSlicer öffnen`,importTo:`In Dateimanager importieren`,recentImportsHeader:`Zuletzt importiert`,phaseResolving:`Auflösen`,phaseDownloading:`Lade herunter`,folderAuto:`MakerWorld (Standard)`,importAll:`Alle importieren`,importAllProgress:`Importiere {{current}}/{{total}}`,openGallery:`Bildergalerie öffnen`,galleryPrev:`Vorheriges Bild`,galleryNext:`Nächstes Bild`,deleteImport:`Aus Bibliothek entfernen`,importDeleting:`Wird entfernt…`,importDeleted:`Aus Bibliothek entfernt`,confirmDelete:`{{filename}} aus der Bibliothek entfernen? Die lokale Datei wird gelöscht, die Platte kann aber erneut von MakerWorld importiert werden.`,errors:{resolveFailed:`Diese MakerWorld-URL konnte nicht aufgelöst werden.`,downloadFailed:`Download fehlgeschlagen. Bitte erneut versuchen.`,deleteFailed:`Datei konnte nicht aus der Bibliothek entfernt werden.`}},gcodeViewer:{filamentSlot:`Filament {{n}}`,loading:`Werkzeugweg wird gelesen…`,loadFailed:`Der G-Code für diese Datei konnte nicht geladen werden.`,showTravel:`Leerfahrten`,topLayer:`Oberste Schicht`,bottomLayer:`Unterste Schicht`,noSource:`Es wurde keine Datei zur Vorschau angegeben.`,view:{filament:`Filament`,feature:`Merkmal`,height:`Höhe`,width:`Breite`},feature:{wall:`Wände`,sparseInfill:`Spärliche Füllung`,solidInfill:`Massive Füllung`,bridge:`Brücke / Überhang`,support:`Stützen`,skirt:`Skirt / Brim`,gapFill:`Lückenfüllung`,ironing:`Bügeln`,primeTower:`Reinigungsturm`},back:`Zurück`,backToArchives:`Zurück zum Druckarchiv`,backToFiles:`Zurück zum Dateimanager`,plates:`Platten`,plateN:`Platte {{n}}`},libraryTrash:{title:`Papierkorb`,headerButton:`Papierkorb`,headerTooltip:`In den Papierkorb verschobene Dateien anzeigen`,backToFiles:`Zurück zum Dateimanager`,subtitleAdmin:`Gelöschte Dateien bleiben {{days}} Tage hier und werden dann automatisch entfernt. Diese Ansicht zeigt Papierkorb-Dateien aller Benutzer.`,subtitleUser:`Gelöschte Dateien bleiben {{days}} Tage hier und werden dann automatisch entfernt.`,loading:`Papierkorb wird geladen…`,loadError:`Papierkorb konnte nicht geladen werden.`,empty:`Der Papierkorb ist leer.`,summary:`{{count}} Dateien · {{size}}`,emptyTrash:`Papierkorb leeren`,restore:`Wiederherstellen`,purgeNow:`Jetzt löschen`,autoPurgeIn:`Wird in {{when}} gelöscht`,days:`Tage`,retentionLabel:`Automatisch löschen nach`,selectAll:`Alle auswählen`,selectOne:`{{filename}} auswählen`,selectionCount:`{{count}} ausgewählt`,bulkRestore:`Auswahl wiederherstellen`,bulkPurge:`Auswahl löschen`,col:{filename:`Datei`,folder:`Ordner`,size:`Größe`,deleted:`Verschoben`,autoPurge:`Löschung`,owner:`Besitzer`,actions:`Aktionen`},confirm:{purgeTitle:`Endgültig löschen?`,purgeBody:`{{filename}} wird von der Festplatte gelöscht und kann nicht wiederhergestellt werden.`,emptyTitle:`Papierkorb leeren?`,emptyBody:`Alle {{count}} Dateien werden endgültig von der Festplatte gelöscht.`,bulkPurgeTitle:`Ausgewählte Dateien endgültig löschen?`,bulkPurgeBody:`Die {{count}} ausgewählten Dateien werden von der Festplatte gelöscht und können nicht wiederhergestellt werden.`,cta:`Endgültig löschen`},toast:{restored:`Datei wiederhergestellt.`,restoreFailed:`Datei konnte nicht wiederhergestellt werden.`,purged:`Datei endgültig gelöscht.`,purgeFailed:`Datei konnte nicht gelöscht werden.`,emptied:`{{count}} Datei(en) aus dem Papierkorb gelöscht.`,emptyFailed:`Papierkorb konnte nicht geleert werden.`,retentionSaved:`Automatisches Löschen auf {{days}} Tage gesetzt.`,retentionFailed:`Einstellung konnte nicht gespeichert werden.`,bulkRestored:`{{count}} Datei(en) wiederhergestellt.`,bulkPurged:`{{count}} Datei(en) gelöscht.`}},libraryPurge:{title:`Alte Dateien entfernen`,headerButton:`Alte entfernen`,headerTooltip:`Alte Dateien im Block in den Papierkorb verschieben`,description:`Räume alte Dateien in einem Rutsch aus deiner Bibliothek. Dateien mit Druckverlauf werden nach dem letzten Druckdatum bewertet; nie gedruckte Dateien nach dem Upload-Datum.`,ageLabel:`Dateien älter als`,days:`Tage`,includeNeverPrinted:`Dateien einbeziehen, die nie gedruckt wurden`,effectsTitle:`Was passiert, wenn du auf „Entfernen" klickst`,effect1:`Passende Dateien werden in den Papierkorb verschoben — noch nicht von der Festplatte gelöscht.`,effect2:`Du kannst sie bis zum Ablauf der Aufbewahrungsfrist jederzeit wiederherstellen.`,effect3:`Nach Ablauf der Frist löscht der Papierkorb-Sweeper sie endgültig von der Festplatte.`,effect4:`Dateien in externen (verknüpften) Ordnern werden übersprungen — Bambuddy löscht keine Bytes, die ihm nicht gehören.`,previewLoading:`Prüfe, wie viele Dateien passen…`,previewFailed:`Vorschau konnte nicht geladen werden.`,previewSummary:`{{count}} Dateien · {{size}} würden in den Papierkorb verschoben`,andMore:`…und {{count}} weitere`,warning:`Dateien im Papierkorb zählen weiterhin zum Speicher, bis die Aufbewahrungsfrist abgelaufen ist. Leere den Papierkorb danach, um sofort Speicher freizugeben.`,confirmCta:`{{count}} in den Papierkorb verschieben`,purging:`Wird verschoben…`,toast:{success:`{{count}} Datei(en) in den Papierkorb verschoben.`,failed:`Dateien konnten nicht verschoben werden.`}},libraryAutoPurge:{enableLabel:`Alte Dateien automatisch entfernen`,enableDescription:`Führt die Admin-Bereinigung einmal pro Tag aus. Dateien landen zuerst im Papierkorb — sie werden nicht sofort gelöscht.`,ageLabel:`Dateien älter als`,ageDescription:`Minimum 7 Tage, Maximum 10 Jahre. Verwendet dieselbe Altersregel wie die manuelle „Alte entfernen“-Schaltfläche.`,days:`Tage`,includeNeverPrinted:`Dateien einbeziehen, die nie gedruckt wurden`,saveFailed:`Einstellungen konnten nicht gespeichert werden.`},archivePurge:{headerButton:`Alte löschen`,headerTooltip:`Alte Archive in einem Rutsch löschen`,title:`Alte Archive löschen`,description:`Räume alte Druckhistorie auf. Jedes Archiv wird nach seinem letzten abgeschlossenen Druck bewertet — ein erneuter Druck setzt die Frist zurück, aktive Arbeit bleibt sicher.`,ageLabel:`Archive löschen, die zuletzt gedruckt wurden vor`,days:`Tage`,effectsTitle:`Was passiert, wenn du auf „Löschen" klickst`,effect1:`Jedes passende Archiv wird aus der Listenansicht ausgeblendet und seine Dateien werden von der Festplatte entfernt (3MF, Vorschau, Timelapse, Quell-3MF, F3D, Fotos).`,effect2:`Die Archivzeile bleibt in der Datenbank, damit die Quick Stats den Filament-, Zeit-, Kosten- und Energiebeitrag behalten — wie der Standard beim Einzel-Löschen.`,effect3:`Aktiviere unten „Auch aus Statistiken entfernen", um zusätzlich den Quick-Stats-Beitrag zu verwerfen (entspricht dem Einzel-Löschen-Häkchen). Dieser Pfad ist unwiderruflich.`,effect4:`Ein erneuter Druck setzt die Frist zurück, Archive, die du weiterhin nutzt, bleiben sicher.`,purgeStatsLabel:`Auch aus Statistiken entfernen`,purgeStatsHint:`Verwirft die passenden Archive aus den Quick Stats (Filament, Zeit, Kosten, Energie). Ohne diese Option behalten die Quick Stats jeden Beitrag und nur die Dateien werden gelöscht.`,previewLoading:`Prüfe passende Archive…`,previewFailed:`Vorschau konnte nicht erstellt werden.`,previewSummary:`{{count}} Archive · {{size}} würden entfernt`,andMore:`…und {{count}} weitere`,warning:`Dateien werden von der Festplatte entfernt und können nicht wiederhergestellt werden. Lade wichtige Archive vorher herunter oder markiere sie als Favorit.`,confirmCta:`{{count}} Archiv(e) entfernen`,purging:`Entferne…`,toast:{success:`{{count}} Archiv(e) entfernt.`,failed:`Archive konnten nicht gelöscht werden.`}},archiveAutoPurge:{enableLabel:`Alte Archive automatisch löschen`,enableDescription:`Blendet einmal pro Tag Archive aus der Listenansicht aus und entfernt ihre Dateien von der Festplatte, wenn sie im angegebenen Zeitraum nicht gedruckt wurden. Ein erneuter Druck setzt die Frist zurück.`,ageLabel:`Archive automatisch löschen, die zuletzt gedruckt wurden vor`,ageDescription:`Minimum 7 Tage, Maximum 10 Jahre. Basiert auf dem letzten abgeschlossenen Druck — ein erneuter Druck setzt die Frist zurück. Entfernt 3MF, Vorschau, Timelapse, Quell-3MF, F3D und Fotos.`,days:`Tage`,purgeStatsLabel:`Auch aus Statistiken entfernen`,purgeStatsDescription:`Wenn aktiviert, verwirft der tägliche Sweeper auch den Quick-Stats-Beitrag (Filament, Zeit, Kosten, Energie) jedes gelöschten Archivs. Standard aus — Quick Stats behalten den Beitrag, nur die Dateien werden gelöscht.`,runNow:`Archive jetzt löschen`,saveFailed:`Einstellungen konnten nicht gespeichert werden.`},cameraTokens:{scope:{camera_stream:`Kamera-Stream`,camwall:`Kamera-Wand`,overlay:`Streaming-Overlay`},title:`Kamera-API-Tokens`,navTitle:`Kamera-API-Tokens`,description:`Langlebige Tokens, um den Kamera-Stream in Home Assistant, Frigate, Kiosk-Bildschirme oder jedes andere Werkzeug einzubinden, das eine stabile Adresse braucht. Der Geltungsbereich wird beim Erstellen gewählt; ein Token lässt sich jederzeit widerrufen.`,loading:`Laden…`,confirmRevoke:{title:`Dieses Token widerrufen?`,body:`Jedes Gerät, das "{{name}}" verwendet, verliert sofort den Zugriff. Dies kann nicht rückgängig gemacht werden.`,cancel:`Abbrechen`,confirm:`Widerrufen`},create:{scopeLabel:`Geltungsbereich`,hintCameraStream:`Ein Kamera-Stream-Token kann ausschließlich Kamera-Streams und Schnappschüsse abrufen. Geeignet für Home Assistant, Frigate oder alles, was eine einzelne Kamera einbettet.`,hintCamWall:`Ein Kamera-Wand-Token öffnet /camwall auf einem Bildschirm ohne Anmeldung. Es sieht Name und Status jedes Druckers sowie deren Kamera-Streams. Dateinamen, Adressen und Zugangscodes sieht es nicht.`,hintOverlay:`Ein Streaming-Overlay-Token öffnet /overlay/{printerId} auf einem Bildschirm ohne Anmeldung – für OBS oder jeden Livestream. Es sieht den Kamera-Stream eines Druckers sowie dessen Live-Druckstatus, einschließlich des auf dem Bildschirm angezeigten Dateinamens. Adressen und Zugangscodes sieht es nicht.`,title:`Neues Token erstellen`,nameLabel:`Token-Name`,namePlaceholder:`z. B. Home Assistant`,daysLabel:`Tage bis Ablauf`,submit:`Erstellen`,hint:`Maximale Lebensdauer 365 Tage. Der Token-Wert wird nur einmal bei der Erstellung angezeigt – jetzt kopieren.`},created:{camWallUrlTitle:`Kamera-Wand-Adresse für diesen Bildschirm`,camWallUrlHint:`Diese Adresse auf dem Bildschirm öffnen. Wer die Adresse lesen kann, kann die Kamera-Wand sehen — behandeln Sie sie wie einen Schlüssel. Widerrufen Sie das Token, um den Bildschirm abzuschalten.`,overlayUrlTitle:`Overlay-Adresse für OBS`,overlayUrlHint:`Fügen Sie dies in OBS als Browser-Quelle hinzu. Ändern Sie die Zahl in /overlay/1 auf die Nummer Ihres Druckers (aus dessen Adresse auf der Seite „Drucker“). Wer die Adresse lesen kann, kann den Stream sehen – behandeln Sie sie wie einen Schlüssel und widerrufen Sie das Token, um sie abzuschalten.`,title:`Token erstellt – jetzt kopieren`,warning:`Dies ist das einzige Mal, dass dieser Token sichtbar ist. Nach dem Schließen dieses Dialogs können Sie ihn nie wieder anzeigen.`,copy:`Kopieren`,dismiss:`Ich habe es gespeichert`},list:{scope:`Geltungsbereich`,myTitle:`Meine Tokens`,allTitle:`Alle Benutzer (Admin-Ansicht)`,empty:`Noch keine Tokens.`,name:`Name`,owner:`Eigentümer`,prefix:`Präfix`,created:`Erstellt`,expires:`Läuft ab`,lastUsed:`Zuletzt verwendet`,revoke:`Widerrufen`,expired:`Abgelaufen`},toast:{created:`Token erstellt`,createFailed:`Token konnte nicht erstellt werden`,revoked:`Token widerrufen`,revokeFailed:`Token konnte nicht widerrufen werden`,loadFailed:`Tokens konnten nicht geladen werden`,copied:`In Zwischenablage kopiert`,copyFailed:`Kopieren fehlgeschlagen – manuell auswählen und kopieren`}},forecast:{title:`Bestandsprognose`,noSpools:`Keine aktiven Spulen gefunden. Fügen Sie Spulen zu Ihrem Inventar hinzu, um Prognosedaten zu sehen.`,noUsageData:`Keine Verbrauchsdaten verfügbar — die Bestandszeitlinie kann nicht projiziert werden.`,sku:`SKU`,material:`Material`,stock:`Bestand`,dailyRate:`Rate`,daysLeft:`Verbleibende Tage`,emptyBy:`Aufgebraucht am`,reorderBy:`Nachbestellen bis`,actions:`Aktionen`,trend:`Trend`,estimated:`Gesch.`,noData:`Keine Daten`,timeframe:`Zeitraum`,chartTitle:`Bestandsprognose — Top 5 Materialien`,dashedLinesROP:`Gestrichelte Linien = Nachbestellpunkte`,stockLevel:`Bestandsniveau`,reorderPoint:`Nachbestellpunkt`,safetyMargin:`Sicherheitspuffer`,trendLegend:`Trend (verlaufsbasiert, 95 % Serviceniveau)`,estimatedLegend:`Geschätzt (Gewichtsdelta)`,noDataLegend:`Keine Daten`,ropLabel:`NBP`,ssLabel:`SB`,safetyStockLegend:`Sicherheitsbestand`,stockArrivalLegend:`Wareneingang`,stockoutLegend:`Fehlbestand`,alertCount_one:`{{count}} Warnung`,alertCount_other:`{{count}} Warnungen`,order:`Bestellen`,globalLeadTime:`Globale Lieferzeit`,globalLeadTimeHint:`Globale Lieferzeitvorgabe — wird in der Nachbestellpunktberechnung für alle SKUs verwendet`,save:`Speichern`,cancel:`Abbrechen`,settingsSaved:`Einstellungen gespeichert`,failedSaveSettings:`Einstellungen konnten nicht gespeichert werden`,globalLeadTimeSaved:`Globale Lieferzeit gespeichert`,skuLeadTimeOverride:`SKU-Lieferzeitüberschreibung`,skuLeadTimeHint:`0 = globale Lieferzeit verwenden. Größer 0 setzen, um für diesen SKU zu überschreiben.`,safetyMarginLabel:`Sicherheitspuffer`,effectiveLeadTime:`Effektive Lieferzeit`,effectiveLeadTimeHint:`max(global {{global}}T, SKU {{sku}}T)`,reorderPointHint:`d̄ × LT + safety margin — bei diesem Bestand bestellen`,safetyMarginHint:`Statistischer Sicherheitsbestand (z=1,65 × σ × √LT) + benutzerdefinierter Puffer`,safetyMarginHintDays:`Zusätzlicher Puffer auf den statistischen Sicherheitsbestand.{{approx}}`,safetyMarginHintDaysApprox:` ≈ {{g}}g beim aktuellen Verbrauch.`,safetyMarginHintG:`Fester Gewichtspuffer auf den statistischen Sicherheitsbestand.{{approx}}`,safetyMarginHintGApprox:` ≈ {{days}}d beim aktuellen Verbrauch.`,individualSpools:`Einzelne Spulen`,labelWeight:`Etikett`,spoolCount_one:`{{count}} Spule`,spoolCount_other:`{{count}} Spulen`,stockBreakRisk:`Bestandsunterbrechungsrisiko`,stockBreakBefore:`Bestandsunterbrechung vor Auffüllung`,stockBreakDetail:`{{days}}d verbleibend, Lieferzeit {{lt}}d.`,reorderNow:`Jetzt nachbestellen`,reorderTriggerPassed:`Auslösedatum {{date}} ist überschritten.`,shoppingList:`Einkaufsliste`,shoppingListItems_one:`({{count}} Artikel)`,shoppingListItems_other:`({{count}} Artikel)`,shoppingListEmpty:`Einkaufsliste ist leer. Klicken Sie auf das Warenkorbsymbol in einer Zeile, um Artikel hinzuzufügen.`,addToCart:`Zur Einkaufsliste hinzufügen`,alertsSnoozed:`Benachrichtigungen für diese SKU stummschalten`,alertsEnabled:`Benachrichtigungen für diese SKU aktivieren`,addedToCart:`Zur Einkaufsliste hinzugefügt`,failedAddItem:`Artikel konnte nicht hinzugefügt werden`,listView:`Liste`,logisticsView:`Logistik`,qty:`Menge`,weight:`Gewicht`,leadTime:`Lieferzeit`,expectedRestock:`Erwartete Auffüllung`,status:`Status`,note:`Notiz`,pending:`Ausstehend`,purchased:`Bestellt`,received:`Erhalten`,markPurchased:`Als bestellt markieren`,markReceived:`Als erhalten markieren — fügt Spulen dem Lagerbestand hinzu`,resetToPending:`Auf ausstehend zurücksetzen`,remove:`Entfernen`,clearAll:`Alle löschen`,downloadCsv:`CSV`,addToCartTitle:`Zur Einkaufsliste hinzufügen`,byQuantity:`Nach Menge`,byDuration:`Nach Dauer`,numberOfSpools:`Anzahl der Spulen`,lastHowManyDays:`Wie viele Tage soll es reichen?`,noUsageQty:`Keine Verbrauchsdaten — Menge auf 1 gesetzt.`,noteOptional:`Notiz (optional)`,notePlaceholder:`z. B. für Projekt X, dringend…`,addNSpools_one:`{{count}} Spule hinzufügen`,addNSpools_other:`{{count}} Spulen hinzufügen`,onArrival:`Bei Ankunft`,stockBreakIn:`Bestandsunterbrechung in {{days}}d.`,stockRunsOutBefore:`Bestand läuft vor Ablauf der {{lt}}d Lieferzeit aus.`,atRate:`Bei {{rate}}g/Tag benötigen Sie`,moreSpools_one:`{{count}} weitere Spule`,moreSpools_other:`{{count}} weitere Spulen`,bridgeGap:`um die Lücke zu überbrücken.`,noReadAccess:`Sie haben keine Berechtigung, Bestandsprognosen anzuzeigen.`,noWriteAccess:`Sie haben keine Berechtigung, Prognoseeinstellungen zu ändern.`}}},es:{translation:{nav:{printers:`Impresoras`,archives:`Archivos`,queue:`Cola de impresión`,stats:`Estadísticas`,profiles:`Perfiles`,maintenance:`Mantenimiento`,projects:`Proyectos`,inventory:`Filamento`,finance:`Finanzas`,files:`Gestor de archivos`,makerworld:`MakerWorld`,notifications:`Notificaciones`,settings:`Ajustes`,system:`Sistema`,collapseSidebar:`Contraer barra lateral`,expandSidebar:`Expandir barra lateral`,update:`Actualizar`,updateAvailable:`Actualización disponible: v{{version}}`,updateAvailableBanner:`¡La versión {{version}} está disponible!`,viewUpdate:`Ver actualización`,viewOnGithub:`Ver en GitHub`,keyboardShortcuts:`Atajos de teclado (?)`,switchToLight:`Cambiar a modo claro`,switchToDark:`Cambiar a modo oscuro`,switchToSystem:`Cambiar a modo del sistema`,smartSwitches:`Interruptores inteligentes`,logout:`Cerrar sesión`,installApp:`Instalar app`,installAppSuccess:`Bambuddy se ha instalado`},common:{plusNMore:`+{{count}} más`,save:`Guardar`,saving:`Guardando...`,cancel:`Cancelar`,delete:`Eliminar`,edit:`Editar`,add:`Añadir`,close:`Cerrar`,confirm:`Confirmar`,loading:`Cargando...`,error:`Error`,errorLoading:`Error al cargar los datos`,retry:`Reintentar`,success:`Éxito`,warning:`Advertencia`,enabled:`Activado`,disabled:`Desactivado`,yes:`Sí`,no:`No`,on:`Encendido`,off:`Apagado`,all:`Todos`,none:`Ninguno`,search:`Buscar`,filter:`Filtrar`,sort:`Ordenar`,refresh:`Actualizar`,download:`Descargar`,upload:`Subir`,uploading:`Subiendo...`,uploadFailed:`Error al subir`,actions:`Acciones`,status:`Estado`,name:`Nombre`,description:`Descripción`,date:`Fecha`,time:`Hora`,hours:`horas`,minutes:`minutos`,seconds:`segundos`,days:`días`,enable:`Activar`,disable:`Desactivar`,permissions:`Permisos`,noPrinters:`No hay impresoras configuradas`,noData:`No hay datos disponibles`,linkNotFound:`Enlace no encontrado`,required:`Obligatorio`,optional:`Opcional`,dismiss:`Descartar`,apply:`Aplicar`,reset:`Restablecer`,export:`Exportar`,import:`Importar`,clear:`Borrar`,selectAll:`Seleccionar todo`,deselectAll:`Deseleccionar todo`,noChange:`— Sin cambios —`,unchanged:`Sin cambios`,unassigned:`Sin asignar`,unknown:`Desconocido`,unknownError:`Error desconocido`,today:`Hoy`,tomorrow:`Mañana`,asap:`Lo antes posible`,overdue:`Atrasado`,now:`Ahora`,collapse:`Contraer`,expand:`Expandir`,previous:`Anterior`,next:`Siguiente`,viewArchive:`Ver archivo`,viewInFileManager:`Ver en el gestor de archivos`,addedBy:`Añadido por {{username}}`,prints:`impresiones`,more:`+{{count}} más`,ascending:`Ascendente`,descending:`Descendente`,back:`Atrás`,copy:`Copiar`,copied:`¡Copiado!`,printer:`Impresora`,remove:`Quitar`,type:`Tipo`,print:`Imprimir`,rename:`Renombrar`,move:`Mover`,create:`Crear`,duplicate:`Duplicar`,left:`Izquierda`,right:`Derecha`,user:`Usuario`,run:`Ejecutar`,running:`Ejecutando...`},finance:{allTypes:`Todos los tipos`,allCostCenters:`Todos los centros de costes`,title:`Finanzas`,subtitle:`Monedero, transacciones personales y centros de costes`,noAccess:`No tienes permiso para ver los datos financieros.`,personalView:`Vista personal`,adminView:`Vista de administración`,createCostCenter:`Crear centro de costes`,adjustWallet:`Ajustar monedero`,addManualPrint:`Añadir impresión manual`,manageMembers:`Gestionar miembros del centro de costes`,currentBalance:`Saldo personal`,transactions:`Transacciones`,personalTransactions:`Transacciones personales`,costCenters:`Centros de costes`,availableForPrinting:`Disponible para asignar impresiones`,costCenterName:`Nombre`,budgetType:`Tipo de presupuesto`,monthlyBudget:`Presupuesto mensual`,totalBudget:`Presupuesto total`,noBudget:`Sin presupuesto`,create:`Crear`,selectUser:`Seleccionar usuario`,transactionType:`Tipo`,amount:`Importe`,noCostCenter:`Sin centro de costes`,descriptionOptional:`Descripción (opcional)`,applyAdjustment:`Aplicar ajuste`,memberCanPrint:`El miembro puede imprimir`,addMember:`Añadir miembro`,canPrint:`Puede imprimir`,noMembers:`No hay miembros asignados.`,editCostCenter:`Editar centro de costes`,myCostCenters:`Mis centros de costes`,costCentersHint:`Revisa los límites presupuestarios y mantén los costes bajo control`,noCostCenters:`No se encontraron centros de costes.`,owner:`Propietario`,balance:`Saldo de cuenta`,unlimited:`Ilimitado`,budgetPolicyHint:`Los saldos de cuenta registran los costes. La impresión solo está limitada por el presupuesto del centro de costes seleccionado; sin presupuesto, es ilimitada.`,budget:`Presupuesto`,shared:`Compartido`,cannotEditPrivateCostCenter:`Los centros de costes privados no se pueden editar aquí`,recentTransactions:`Transacciones recientes`,transactionsHint:`Filtrar por tipo y centro de costes`,first:`Primera`,prev:`Anterior`,next:`Siguiente`,last:`Última`,pageNumberOf:`Página {{page}} de {{total}}`,noTransactions:`No hay transacciones disponibles.`,noTransactionsForFilter:`Ninguna transacción coincide con los filtros seleccionados.`,costCenter:`Centro de costes`,balanceAfter:`Saldo posterior`,userWithId:`Usuario n.º {{id}}`,partial:`Parcial`,editTransaction:`Editar transacción`,selectCostCenter:`Seleccionar centro de costes...`,costCenterRequired:`Selecciona un centro de costes`,amountExample:`p. ej., 4,00`,manualAdjustmentExample:`p. ej., Ajuste manual`,userRequired:`Selecciona un usuario`,amountInvalid:`El importe debe ser un número válido`,createdCostCenter:`Centro de costes creado`,createCostCenterFailed:`No se pudo crear el centro de costes`,transactionDeleted:`Transacción eliminada`,deleteTransactionFailed:`No se pudo eliminar la transacción`,transactionEdited:`Transacción actualizada y libro mayor recalculado`,editTransactionFailed:`No se pudo editar la transacción`,manualPrintCreated:`Cargo de impresión manual añadido y libro mayor recalculado`,manualPrintFailed:`No se pudo crear la impresión manual`,memberSaved:`Miembro guardado`,memberSaveFailed:`No se pudo guardar el miembro`,memberRemoved:`Miembro eliminado`,memberRemoveFailed:`No se pudo eliminar el miembro`,costCenterNameRequired:`El nombre del centro de costes es obligatorio`,costCenterUpdated:`Centro de costes actualizado`,costCenterUpdateFailed:`No se pudo actualizar el centro de costes`,confirmDeleteCostCenter:`¿Eliminar el centro de costes «{{name}}»?`,costCenterDeleted:`Centro de costes eliminado`,costCenterDeleteFailed:`No se pudo eliminar el centro de costes`,deleteTransactionConfirm:`¿Eliminar esta transacción? Los saldos se recalcularán automáticamente.`,deposit:`Ingreso`,withdraw:`Retirada`,printCharge:`Cargo de impresión`,deleteTransaction:`Eliminar transacción`},printers:{addPreflight:{checking:`Comprobando la conexión...`,warning:`Algunas comprobaciones de conexión fallaron. Esta impresora podría aparecer como desconectada. Revisa las comprobaciones de abajo, soluciona lo que puedas o guárdala de todos modos.`,back:`Atrás`,saveAnyway:`Guardar de todos modos`},title:`Impresoras`,addPrinter:`Añadir impresora`,editPrinter:`Editar impresora`,deletePrinter:`Eliminar impresora`,printerName:`Nombre de la impresora`,serialNumber:`Número de serie`,ipAddress:`Dirección IP / Nombre de host`,accessCode:`Código de acceso`,model:`Modelo`,nozzleCount:`Número de boquillas`,autoArchive:`Archivado automático`,status:{available:`Disponible`,idle:`Inactiva`,printing:`Imprimiendo`,paused:`En pausa`,offline:`Desconectada`,problem:`Problema`,error:`Error`,finished:`Finalizada`,unknown:`Desconocido`},temperatures:{nozzle:`Boquilla`,bed:`Cama`,chamber:`Cámara`},heaterHistory:{title:`Historial de calentadores`,openLabel:`Ver historial de calentadores`,nozzle:`Boquilla`,nozzle2:`Boquilla 2`,bed:`Cama`,chamber:`Cámara`,error:`No se pudo cargar el historial`,empty:`Aún no hay datos registrados`},progress:`{{percent}}% completado`,timeRemaining:`{{time}} restante`,deleteConfirm:`¿Está seguro de que desea eliminar "{{name}}"?`,maintenanceOk:`Mantenimiento correcto`,maintenanceWarning:`{{count}} advertencia`,maintenanceWarning_plural:`{{count}} advertencias`,maintenanceDue:`{{count}} pendiente`,maintenanceDue_plural:`{{count}} pendientes`,sort:{name:`Nombre`,status:`Estado`,model:`Modelo`,location:`Ubicación`,eta:`Tiempo restante`,ascending:`Orden ascendente`,descending:`Orden descendente`},cardSize:{small:`Tarjetas pequeñas`,medium:`Tarjetas medianas`,large:`Tarjetas grandes`,extraLarge:`Tarjetas extragrandes`},pageView:{openCamWallPage:`Abrir el muro de cámaras como página`,cards:`Tarjetas`,camWall:`Muro de cámaras`},camWall:{page:{tokenRejected:`Este enlace del muro de cámaras ya no es válido. Es posible que el token haya caducado o se haya revocado.`,loadFailed:`No se han podido cargar las impresoras.`},noPrinters:`No hay impresoras que mostrar`,noSignal:`Sin señal`,live:`En vivo`,snap:`Foto`,off:`Inactivo`,summary:`{{live}} en vivo, {{snap}} fotos, {{total}} en total`,layer:`Capa {{cur}}/{{total}}`,timeLeft:`quedan {{time}}`,statusMode:{off:`Apagado`,compact:`Compacto`,full:`Completo`},settings:{title:`Ajustes del muro de cámaras`,maxLive:`Máx. transmisiones en vivo`,maxLiveHint:`Cuántos mosaicos transmiten en vivo a la vez. Los demás se actualizan como fotos.`,snapshotInterval:`Intervalo de fotos (segundos)`,snapshotIntervalHint:`Con qué frecuencia los mosaicos no en vivo obtienen una nueva foto.`,statusOverlay:`Superposición de estado`,statusOverlayHint:`Compacto: solo insignia de estado. Completo: + progreso, capa, tiempo restante.`}},hideOffline:`Ocultar desconectadas`,nextAvailable:`Próxima disponible`,powerOn:`Encender`,offlinePrintersWithPlugs:`Impresoras desconectadas con enchufes inteligentes`,noPrintersConfigured:`Aún no hay impresoras configuradas`,search:`Buscar impresoras...`,noSearchResults:`Ninguna impresora coincide con su búsqueda o filtros`,filter:{allStatuses:`Todos los estados`,allLocations:`Todas las ubicaciones`},toolbar:{filters:`Filtros`,view:`Vista`,actions:`Acciones`},readyToPrint:`Lista para imprimir`,external:`Externo`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Eliminar archivos de impresión`,noLabel:`Sin etiqueta`,printPreview:`Vista previa de impresión`,width:`Anchura`,height:`Altura`,noObjectsFound:`No se encontraron objetos`,objectsLoadedOnPrintStart:`Los objetos se cargan al iniciar una impresión`,willBeSkipped:`Se omitirá`,name:`Nombre`,serialCannotBeChanged:`El número de serie no se puede cambiar`,locationHelp:`Se usa para agrupar impresoras y filtrar trabajos en cola`,wifiSignal:{veryWeak:`Muy débil`,weak:`Débil`,fair:`Aceptable`,good:`Buena`,excellent:`Excelente`},maintenanceUpToDate:`Todo el mantenimiento al día - Haga clic para ver`,maintenance:{title:`En mantenimiento`,subtitle:`Esta impresora está en pausa — sin conexión, no elegible para la cola y sin enviar notificaciones.`,pillLabel:`Mantenimiento`,exitButton:`Salir de mantenimiento`,menuEnter:`Entrar en modo mantenimiento`,menuExit:`Salir del modo mantenimiento`,toastEntered:`{{name}} ahora está en modo mantenimiento`,toastExited:`{{name}} vuelve a estar en línea`,confirmMidPrintTitle:`¿Entrar en modo mantenimiento durante una impresión?`,confirmMidPrintMessage:`{{name}} está imprimiendo actualmente. Entrar en modo mantenimiento desconectará MQTT y detendrá el seguimiento del progreso y las notificaciones de finalización para este trabajo. ¿Continuar?`,editFieldLabel:`Modo mantenimiento`,editFieldHelp:`Cuando está activado, esta impresora se pausa de MQTT, despacho de cola y notificaciones — útil para reparaciones, instalaciones paralelas de Bambuddy o suspensión temporal.`},chamberLightOn:`Encender luz de la cámara`,chamberLightOff:`Apagar luz de la cámara`,files:`Archivos`,browseFiles:`Explorar archivos de la impresora`,autoOffAfterPrint:`Apagado automático tras la impresión`,autoOffExecuted:`Se ejecutó el apagado automático - encienda la impresora para restablecer`,hmsErrors:`Errores HMS`,viewHmsErrors:`Ver {{count}} error(es) HMS`,resume:`Reanudar`,pause:`Pausar`,stop:`Detener`,camera:`Cámara`,skipObject:`Omitir objeto`,reconnect:`Reconectar`,forceRefresh:`Forzar actualización`,forceRefreshSuccess:`Actualización solicitada`,mqttDebug:`Depuración MQTT`,printerInformation:`Información de la impresora`,copyToClipboard:`Copiar`,copied:`¡Copiado!`,state:`Estado`,wifiSignalLabel:`Señal Wi-Fi`,developerMode:`Modo desarrollador`,enabled:`Activado`,disabled:`Desactivado`,addedOn:`Añadida`,sdCard:`Tarjeta SD`,inserted:`Insertada`,notInserted:`No insertada`,totalPrintHours:`Horas de impresión`,activeNozzle:`Activa: boquilla {{nozzle}}`,amsSwitchInletTooltip:`Conmutador de ruta de filamento IN-{{inlet}} ({{side}}): alimenta ambas boquillas`,nozzleRack:`Soporte de boquillas`,nozzleDocked:`Acoplada`,nozzleMounted:`Montada`,nozzleActive:`Activa`,nozzleIdle:`Inactiva`,nozzleDiameter:`Diámetro`,nozzleType:`Tipo`,nozzleStatus:`Estado`,nozzleFilament:`Filamento`,nozzleWear:`Desgaste`,nozzleMaxTemp:`Temp. máx.`,nozzleSerial:`Serie`,nozzleHardenedSteel:`Acero endurecido`,nozzleStainlessSteel:`Acero inoxidable`,nozzleTungstenCarbide:`Carburo de tungsteno`,nozzleFlow:`Flujo`,nozzleHighFlow:`Flujo alto`,nozzleStandardFlow:`Estándar`,firmwareUpdate:`Actualización de firmware`,firmwareInstructions:`En la pantalla táctil de la impresora, vaya a`,firmwareNav:`Navegue hasta`,settings:`Ajustes`,firmware:`Firmware`,discoverPrinters:`Detectar impresoras`,searching:`Buscando...`,manualEntry:`Entrada manual`,addFromCloud:`Añadir desde la nube`,toast:{printerDeleted:`Impresora eliminada`,missingSpoolAssignment:`Impresión iniciada en {{printer}}. Falta la asignación de bobina para: {{slots}}`,killSwitchTriggered:`El interruptor de seguridad de facturación detuvo una impresión no autorizada en {{printer}}: {{filename}}`,billingChargeFailed:`La facturación de {{filename}} en {{printer}} ha fallado. Se conservó la reserva de presupuesto; revisa los registros del servidor.`,assignmentVerified:`Filamento cargado en la ranura {{slot}} ({{printer}})`,assignmentVerifiedNoKprofile:`Ranura {{slot}} en {{printer}} cargada, pero no se aplicó el perfil de calibración de flujo (perfil K)`,assignmentNotConfirmed:`No se pudo confirmar la asignación de la ranura {{slot}} en {{printer}}: revisa la ranura AMS`,printerAdded:`Impresora añadida`,printerUpdated:`Impresora actualizada`,failedToDelete:`Error al eliminar la impresora`,failedToAdd:`Error al añadir la impresora`,connectionFailedNotAdded:`No se pudo conectar con la impresora. Verifique la IP, el número de serie y el código de acceso, y confirme que el modo solo LAN está activado. La impresora no se añadió.`,failedToUpdate:`Error al actualizar la impresora`,commandSent:`Comando enviado`,failedToSendCommand:`Error al enviar el comando`,turnedOn:`{{name}} encendida`,failedToPowerOn:`Error al encender {{name}}`,scriptTriggered:`Script ejecutado`,printStopped:`Impresión detenida`,printPaused:`Impresión en pausa`,printResumed:`Impresión reanudada`,referenceDeleted:`Referencia eliminada`,detectionAreaSaved:`Área de detección guardada`,failedToRunScript:`Error al ejecutar el script`,failedToStopPrint:`Error al detener la impresión`,failedToPausePrint:`Error al pausar la impresión`,failedToResumePrint:`Error al reanudar la impresión`,failedToControlChamberLight:`Error al controlar la luz de la cámara`,failedToSetSpeed:`Error al establecer la velocidad de impresión`,failedToUpdateSetting:`Error al actualizar el ajuste`,failedToSkipObjects:`Error al omitir objetos`,failedToRereadRfid:`Error al releer el RFID`,failedToCheckPlate:`Error al comprobar la cama`,failedToUpdateLabel:`Error al actualizar la etiqueta`,failedToDeleteReference:`Error al eliminar la referencia`,failedToSaveDetectionArea:`Error al guardar el área de detección`,plateCheckEnabled:`Comprobación de cama activada`,plateCheckDisabled:`Comprobación de cama desactivada`,calibrationSaved:`¡Calibración guardada!`,calibrationFailed:`Error en la calibración`,rfidRereadInitiated:`Relectura de RFID iniciada`,loadInitiated:`Cargando filamento…`,unloadInitiated:`Descargando filamento…`,failedToLoad:`Error al cargar el filamento`,failedToUnload:`Error al descargar el filamento`},connection:{connected:`Conectada`,offline:`Desconectada`},plateStatus:{markCleared:`Marcar cama como despejada`,cleared:`Cama despejada`,notCleared:`Cama no despejada`,inUse:`Cama en uso`},queue:{inQueue:`{{count}} impresión en cola`,inQueue_plural:`{{count}} impresiones en cola`},controls:`Controles`,rfid:{reread:`Releer RFID`},ams:{load:`Cargar`,unload:`Descargar`,feedTitle:`¿En qué boquilla cargar {{slot}}?`,feedPrompt:`El Filament Track Switch puede dirigir esta ranura a cualquiera de los dos hotends. Elige cuál alimentar.`,feedLeft:`Boquilla izquierda`,feedRight:`Boquilla derecha`,feedAlreadyLoaded:`Ya cargado`,switchNotReady:`El Filament Track Switch aún no está configurado. Asigna cada AMS a una entrada en la impresora e inténtalo de nuevo.`},bedJog:{limitWarning:`Los límites de recorrido no se aplican en los movimientos manuales: un error del firmware de Bambu ignora los finales de carrera por software en los comandos remotos. Muévelo con cuidado para evitar colisiones.`,title:`Controles de movimiento`,bed:`Cama`,step:`Paso (mm)`,up:`Subir la cama`,down:`Bajar la cama`,toolheadUp:`Subir el cabezal`,toolheadDown:`Bajar el cabezal`,disabledWhilePrinting:`Desactivado durante la impresión`,notHomedTitle:`La impresora no está en posición de origen`,notHomedMessage:`La impresora no se ha llevado a su posición de origen desde la última impresión. Ejecute el autoorigen primero para un posicionamiento seguro (estaciona el cabezal y luego lleva X, Y y Z al origen), o mueva de todos modos — los finales de carrera por software se omitirán.`,homeZ:`Autoorigen`,moveAnyway:`Mover de todos modos`,homingStarted:`Llevando la impresora al origen…`},permission:{noAdd:`No tiene permiso para añadir impresoras`,noEdit:`No tiene permiso para editar impresoras`,noDelete:`No tiene permiso para eliminar impresoras`,noControl:`No tiene permiso para controlar impresoras`,noFiles:`No tiene permiso para acceder a los archivos de la impresora`,noAmsRfid:`No tiene permiso para releer el RFID del AMS`,noSmartPlugControl:`No tiene permiso para controlar enchufes inteligentes`,noCamera:`No tiene permiso para ver las cámaras`},modal:{addTitle:`Añadir impresora`,editTitle:`Editar impresora`,myPrinter:`Mi impresora`,selectModel:`Seleccionar modelo...`,locationGroup:`Ubicación / Grupo (opcional)`,locationPlaceholder:`p. ej., Taller, Oficina, Sótano`,autoArchiveLabel:`Archivar automáticamente las impresiones completadas`,fromPrinterSettings:`Desde los ajustes de la impresora`,modelOptional:`Modelo (opcional)`,saveChanges:`Guardar cambios`},skipObjects:{tooltip:`Omitir objetos`,onlyWhilePrinting:`Omitir objetos (solo durante la impresión)`,requiresMultiple:`Omitir objetos (requiere 2 o más objetos)`,title:`Omitir objetos`,matchIdsInfo:`Haga coincidir los ID con la pantalla de su impresora`,printerShowsIds:`La pantalla de la impresora muestra los ID de los objetos en la cama de impresión`,skipSelected:`Omitir seleccionados`,skipping:`Omitiendo...`,noObjectsSelected:`No hay objetos seleccionados`,selectObjectsToSkip:`Seleccione los objetos que desea omitir de la impresión actual`,skipped:`omitidos`,objectsSkipped:`Objetos omitidos`,activeCount:`{{count}} activos`,waitForLayer:`Espere a la capa 2 o superior para omitir objetos (capa actual {{layer}})`,skip:`Omitir`,confirmTitle:`¿Omitir objeto?`,confirmMessage:`¿Está seguro de que desea omitir "{{name}}"? Esto no se puede deshacer.`,confirmAllMessage:`Se han seleccionado todos los objetos restantes. Esto detendrá el trabajo de impresión. ¿Continuar?`,confirmMultipleMessage:`¿Omitir {{count}} objetos seleccionados? Esto no se puede deshacer.`},confirm:{deleteTitle:`Eliminar impresora`,deleteMessage:`¿Está seguro de que desea eliminar "{{name}}"? Esto eliminará todos los ajustes de conexión.`,deleteArchivesNote:`Todo el historial de impresión de esta impresora se eliminará permanentemente.`,keepArchivesNote:`El historial de impresión se conservará pero ya no estará asociado a esta impresora.`,stopTitle:`Detener impresión`,stopMessage:`¿Está seguro de que desea detener la impresión actual en "{{name}}"? Esto cancelará el trabajo de impresión.`,stopButton:`Detener impresión`,pauseTitle:`Pausar impresión`,pauseMessage:`¿Está seguro de que desea pausar la impresión actual en "{{name}}"?`,pauseButton:`Pausar impresión`,resumeTitle:`Reanudar impresión`,resumeMessage:`¿Está seguro de que desea reanudar la impresión en "{{name}}"?`,resumeButton:`Reanudar impresión`,powerOnTitle:`Encender impresora`,powerOnMessage:`¿Está seguro de que desea ENCENDER "{{name}}"?`,powerOnButton:`Encender`,powerOffTitle:`Apagar impresora`,powerOffMessage:`¿Está seguro de que desea APAGAR "{{name}}"?`,powerOffWarning:`ADVERTENCIA: ¡"{{name}}" está imprimiendo actualmente! ¿Está seguro de que desea APAGARLA? Esto interrumpirá la impresión y podría dañar la impresora.`,powerOffButton:`Apagar`,haToggleTitle:`Conmutar "{{name}}"`,haToggleMessage:`¿Conmutar la entidad de Home Assistant {{entity}}? Esto puede apagarla si está encendida actualmente.`,haToggleWarning:`ADVERTENCIA: ¡"{{name}}" está imprimiendo actualmente! Conmutar {{entity}} puede cortar la corriente e interrumpir la impresión. ¿Continuar?`,haToggleButton:`Conmutar`},bulk:{select:`Seleccionar`,selectAll:`Seleccionar todo`,selectByLocation:`Seleccionar por ubicación`,selected:`{{count}} seleccionadas`,actions:{stop:`Detener`,pause:`Pausar`,resume:`Reanudar`,clearPlate:`Despejar cama`,clearHMS:`Borrar notificaciones`},confirm:{stopTitle:`Detener {{count}} impresiones`,stopMessage:`Esto cancelará las impresiones activas en {{count}} impresora(s). Esta acción no se puede deshacer.`,stopButton:`Detener todo`,pauseTitle:`Pausar {{count}} impresiones`,pauseMessage:`Esto pausará las impresiones activas en {{count}} impresora(s).`,pauseButton:`Pausar todo`,clearPlateTitle:`Despejar {{count}} camas de impresión`,clearPlateMessage:`Esto despejará la cama de impresión en {{count}} impresora(s) y puede activar trabajos en cola.`,clearPlateButton:`Despejar todo`},success:`{{action}} completado en {{count}} impresora(s)`,partial:`{{succeeded}} con éxito, {{failed}} con error`,noneApplicable:`Ninguna de las impresoras seleccionadas está en el estado adecuado para esta acción`,selectByState:`Seleccionar por estado`},discovery:{title:`Detectar impresoras`,searching:`Buscando...`,scanning:`Escaneando...`,scanProgress:`Escaneando... {{scanned}}/{{total}}`,foundPrinters:`Se encontraron {{count}} impresora(s)`,noPrintersFound:`No se encontraron impresoras`,noPrintersFoundSubnet:`No se encontraron impresoras en la subred especificada.`,noPrintersFoundNetwork:`No se encontraron impresoras en la red.`,allConfigured:`Todas las impresoras detectadas ya están configuradas.`,alreadyAdded:`Ya añadida`,select:`Seleccionar`,manualEntry:`Entrada manual`,addFromCloud:`Añadir desde la nube`,subnetToScan:`Subred a escanear`,dockerNote:`Docker detectado. Introduzca la subred de su impresora en notación CIDR. Requiere network_mode: host en docker-compose.yml.`,scanSubnet:`Escanear subred en busca de impresoras`,discoverNetwork:`Detectar impresoras en la red`,scanningSubnet:`Escaneando la subred en busca de impresoras Bambu...`,scanningNetwork:`Escaneando la red...`,serialRequired:`Número de serie obligatorio`,unknown:`Desconocido`,failedToStart:`Error al iniciar la detección`,customSubnetOption:`Subred personalizada...`,customSubnetLabel:`Subred personalizada (CIDR)`,customSubnetNote:`Usa una subred personalizada si tu impresora está en una red distinta a la de este servidor. Los puertos FTP (990) y MQTT (8883) deben ser accesibles a través del límite de enrutamiento.`},drying:{start:`Iniciar secado`,stop:`Detener secado`,temperature:`Temperatura`,duration:`Duración`,hours:`horas`,timeRemaining:`{{time}} restante`,active:`Secando`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`Secado no compatible`,powerRequired:`Conecte el adaptador de corriente del AMS para activar el secado`,cannotDryNow:`El AMS no puede iniciar el secado en este momento`,startingDrying:`Iniciando el secado...`,toastCommandSent:`Comando de secado enviado`,toastStopped:`Secado detenido`,toastNotStarted:`La impresora aceptó el comando, pero el AMS no inició el secado. Comprueba que el adaptador de corriente del AMS esté conectado y que la impresora esté inactiva.`,screenOnly:`En esta impresora, el secado del AMS solo se puede controlar desde la pantalla de la propia impresora (limitación de Bambu)`,stoppingDrying:`Deteniendo el secado...`,rotateTray:`Girar la bobina durante el secado`,rotateUnavailableReason:`No disponible — un slot de este AMS está cargado hacia el cabezal. La bobina está bloqueada por el tubo de alimentación y no puede girar. Retira el filamento primero.`,startMode:`Hora de inicio`,modeNow:`Ahora`,modeDelay:`Tras un retraso`,modeAtTime:`A una hora`,schedule:`Programar`,scheduledFor:`Secado programado para {{time}}`,scheduledAsap:`Secado programado (esperando la impresora)`,cancelScheduled:`Cancelar secado programado`,scheduleFailed:`No se pudo programar el secado`,retractFilament:`Retire el filamento de la salida del AMS para iniciar el secado`,waitingAmsNotFound:`Esperando a que se detecte el AMS`,waitingOffline:`Esperando a que la impresora se conecte`,waitingPrinterBusy:`Esperando a que la impresora esté libre`,waitingAlreadyDrying:`Esperando a que termine el ciclo de secado actual`,waitingInterrupted:`Interrumpido, se reanudará cuando la impresora esté libre`,scheduleFailedReason:`El secado programado falló: {{reason}}`,scheduleFailedUnknown:`Error desconocido`,dismissFailed:`Descartar`},amsBackup:{titleOn:`AMS Filament Backup está ACTIVADO. Haz clic para desactivar.`,titleOff:`AMS Filament Backup está DESACTIVADO. Haz clic para activar.`,titleUnknown:`Estado de AMS Filament Backup no disponible en esta impresora.`,toastEnabled:`AMS Filament Backup activado`,toastDisabled:`AMS Filament Backup desactivado`,modalTitle:`AMS Filament Backup`,modalHelp:`Cuando el slot activo se agota, la impresora rota a slots con el mismo preset y color en este orden.`,modalNoSlots:`Sin filamento cargado.`,modalNoPairs:`No hay pares de respaldo — no hay dos slots que compartan preset y color.`,extruderRightShort:`D`,extruderLeftShort:`I`,stateOn:`Activado`,stateOff:`Desactivado`,stateUnknown:`No compatible con esta impresora`},activeJobSlot:{title:`Este slot es el filamento {{n}} en la impresión activa`,ariaLabel:`Slot de impresión activa {{n}}`},expectedSlot:{title:`La impresora está esperando filamento en este slot`,ariaLabel:`Slot de filamento esperado {{n}}`,label:`{{ams}} · Slot {{slot}}`,external:`Bobina externa`},filaments:`Filamentos`,externalSpool:{hide:`Ocultar bobina externa`,show:`Mostrar bobina externa`},openCameraOverlay:`Abrir la cámara superpuesta`,openCameraWindow:`Abrir la cámara en una ventana nueva`,firmwareUpdateAvailable:`Actualización de firmware disponible: {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — Actualizado`,firmwareUpdateButton:`Actualizar`,plateDetection:{noPermission:`No tiene permiso para actualizar impresoras`,enabledClick:`Comprobación de cama activada - Haga clic para desactivar`,disabledClick:`Comprobación de cama desactivada - Haga clic para activar`,manageCalibration:`Gestionar la calibración de detección de cama`,calibrationRequired:`Calibración necesaria`,calibrationInstructions:`Asegúrese de que la cama de impresión esté <strong>completamente vacía</strong> y luego haga clic en Calibrar.`,calibrationDescription:`La calibración captura una imagen de referencia de la cama vacía. Las comprobaciones futuras se compararán con esta referencia para detectar objetos.`,calibrationTip:`<strong>Consejo:</strong> puede almacenar hasta 5 calibraciones para distintas camas. El sistema usa automáticamente la mejor coincidencia al comprobar.`,plateEmpty:`La cama parece estar vacía`,objectsDetected:`Objetos detectados en la cama`,confidence:`Confianza`,difference:`Diferencia`,analysisPreview:`Vista previa del análisis:`,analysisLegend:`Recuadro verde = área de detección, Superposición roja = diferencias respecto a la calibración`,savedReferences:`Referencias guardadas ({{count}}/{{max}})`,deleteReference:`Eliminar referencia`,labelPlaceholder:`Etiqueta...`,clickToEdit:`{{label}} - Haga clic para editar`,clickToAddLabel:`Haga clic para añadir una etiqueta`},speed:{title:`Velocidad de impresión`,silent:`Silencioso (50%)`,standard:`Estándar (100%)`,sport:`Sport (124%)`,ludicrous:`Ludicrous (166%)`},airduct:{title:`Modo de conducto de aire`,cooling:`Refrigeración`,heating:`Calentamiento`},noSdCard:`Sin SD`,door:{open:`Abierta`,closed:`Cerrada`},fans:{partCooling:`Ventilador de refrigeración de piezas`,auxiliary:`Ventilador auxiliar`,leftAuxiliary:`Ventilador auxiliar izquierdo`,exhaust:`Extracción`,chamber:`Ventilador de la cámara`},clickToViewHmsErrors:`Haga clic para ver los errores HMS`,aiDetection:{safe:`Seguro`,warning:`Advertencia`,failure:`Fallo`,idle:`Inactiva`,error:`Sin comprobar`,unknown:`Iniciando`,tooltipError:`La detección de fallos por IA no está comprobando esta impresión: {{reason}} - haga clic para más detalles`,tooltipUnknown:`Detección de fallos por IA: esperando el primer resultado - haga clic para más detalles`,errorHint:`Esta impresión no se está comprobando. La detección se reanudará automáticamente cuando se solucione el problema indicado abajo.`,tooltip:`Detección de fallos por IA: {{status}} (puntuación {{score}}) - haga clic para más detalles`,tooltipIdle:`Detección de fallos por IA activada - la supervisión comienza con la próxima impresión - haga clic para más detalles`,modalTitle:`Detección de fallos por IA - {{name}}`,currentStatus:`Estado`,score:`Puntuación`,framesAnalyzed:`Fotogramas analizados`,idleHint:`Ahora mismo no se supervisa ninguna impresión. La supervisión comienza automáticamente con la próxima impresión.`,lastError:`Último error`,openSettings:`Abrir ajustes`},estimatedCompletion:`Hora estimada de finalización`,plateNumber:`Cama {{number}}`,slotOptions:`Opciones de la ranura`,amsPopup:{friendlyName:`Nombre del AMS`,friendlyNamePlaceholder:`p. ej. Nombre descriptivo del AMS`,serialNumber:`Número de serie`,firmwareVersion:`Firmware`,save:`Guardar`,clear:`Borrar`,noEditPermission:`No tiene permiso para renombrar unidades AMS`},firmwareModal:{title:`Actualización de firmware`,titleUpToDate:`Información del firmware`,currentVersion:`Actual:`,latestVersion:`Más reciente:`,releaseNotes:`Notas de la versión`,checkingPrereqs:`Comprobando los requisitos previos...`,sdCardReady:`Tarjeta SD lista. Haga clic abajo para subir el firmware.`,uploadedSuccess:`¡Firmware subido a la tarjeta SD!`,applyInstructions:`Para aplicar la actualización en su impresora:`,step1:`En la pantalla táctil de la impresora, vaya a <strong>Ajustes</strong>`,step2:`Navegue hasta <strong>Firmware</strong>`,step3:`Seleccione <strong>Actualizar desde tarjeta SD</strong>`,step4:`La actualización tardará entre 10 y 20 minutos`,done:`Hecho`,starting:`Iniciando...`,uploadFirmware:`Subir firmware`,uploadFailed:`Error al iniciar la subida: {{error}}`,uploadedToast:`¡Firmware subido! Inicie la actualización desde la pantalla de la impresora.`,availableVersions:`Versiones disponibles`,usable:`Utilizable`,unavailable:`No disponible`,installed:`Instalada`,newerBadge:`más reciente`,olderBadge:`más antigua`,currentBadge:`actual`},accessCodePlaceholder:`Dejar vacío para conservar el actual`,roi:{title:`Área de detección (ROI)`,xStart:`Inicio X`,yStart:`Inicio Y`,width:`Anchura`,height:`Altura`,instruction:`Ajuste el área de detección para centrarse en la cama de impresión. El recuadro verde de la vista previa muestra el área actual.`},developerModeWarning:`El modo desarrollador LAN no está activado en: {{names}}. Es posible que algunas funciones no funcionen.`,howToEnable:`Cómo activarlo`,incompatibleFile:`Este archivo se laminó para {{slicedFor}}, pero esta impresora es una {{printerModel}}`,dropNotPrintable:`Solo se pueden imprimir archivos .gcode y .gcode.3mf`,dropToPrint:`Suelte para imprimir`,dropToQueue:`Suelte para poner en cola`},archives:{media:{title:`Vídeos de la impresión`,download:`Descargar vídeos de la impresión`,searching:`Buscando vídeos en la impresora…`,searchFailed:`No se pudieron buscar vídeos en la impresora.`,none:`No se encontraron vídeos timelapse ni fragmentos de cámara IP para esta impresión.`,attachedTimelapse:`Timelapse adjunto`,printerFiles:`Archivos que aún están en la impresora`,downloadSelected:`Descargar seleccionados`,printerMissing:`La impresora ya no está configurada`,timelapseUnavailable:`No se pudo leer el directorio de timelapses`,ipcamUnavailable:`No se pudo leer el directorio de la cámara IP`},title:`Archivos de impresión`,no3mfBanner:{title:`Algunas impresiones recientes no se pudieron archivar con miniaturas`,body:`El slicer no dejó el archivo .gcode.3mf en la tarjeta SD de la impresora, así que Bambuddy no pudo recuperar ni la miniatura ni los metadatos del slicer. Esto suele deberse a que "Almacenar archivos enviados en almacenamiento externo" está desactivado en el slicer (pestaña Dispositivo de Bambu Studio / OrcaSlicer).`,docsLink:`Ver paso 4 de instalación`,docsLinkInternalStorage:`Por qué ocurre`,titleInternalStorage:`Algunas impresiones recientes se quedaron en el almacenamiento interno de la impresora`,bodyInternalStorage:`Bambu Studio guardó el archivo laminado en el almacenamiento interno de la impresora en lugar de la tarjeta, así que Bambuddy no tenía nada que leer por FTP. En la serie H2, la P2S y la X2D su botón «Imprimir» siempre lo hace: solo «Enviar» ofrece elección, y también viene con «Caché» por defecto. Esas impresiones se siguen archivando con su nombre y sus tiempos, solo que sin miniatura ni metadatos del laminador. Para archivos completos, inicia la impresión desde Bambuddy o lamina en OrcaSlicer, o bien en Bambu Studio usa «Enviar» con «Externo» y luego inicia la impresión. Todas requieren una tarjeta o memoria en la impresora.`,titleNoExternalStorage:`Algunas impresiones recientes no se pudieron archivar — no hay almacenamiento en la impresora`,bodyNoExternalStorage:`La impresora no detecta ninguna tarjeta ni memoria en su ranura, así que el archivo laminado no tenía dónde aterrizar y Bambuddy nada que leer. Inserte una y la próxima impresión se archivará por completo.`,titleInternalHistory:`Algunas impresiones recientes se iniciaron desde un archivo que ya estaba en la impresora`,bodyInternalHistory:`Esas impresiones salieron de la propia biblioteca de la impresora: una reimpresión desde su pantalla, un inicio desde Handy o un archivo enviado antes e impreso después. Bambuddy lee los archivos de impresión por FTP, que solo sirve la tarjeta o la memoria, mientras que la impresora guarda esa biblioteca en una zona que FTP no alcanza, así que no había ningún 3MF que leer. Ninguna opción del laminador cambia esto, porque para estas impresiones no se envió nada. Se siguen archivando con su nombre y sus tiempos, y «Editar archivo» permite anotar a mano el filamento usado. Para un archivo completo, inicia la impresión desde Bambuddy o desde tu laminador.`,titleFtpsCooloff:`Algunas impresiones recientes no se pudieron archivar — la impresora rechazó la conexión de archivos`,bodyFtpsCooloff:`Bambuddy abrió el puerto de transferencia de archivos de la impresora (FTPS 990) y la impresora respondió con algo que no es TLS, así que no se pudo leer nada de ella. Esas impresiones siguen archivadas con su nombre y sus tiempos, solo que sin miniatura ni metadatos del laminador. No es un ajuste del laminador ni algo que usted haya cambiado — los mismos modelos y firmware funcionan con normalidad en otras instalaciones, y una impresora afectada suele volver a funcionar sola más tarde. Tras un fallo así, Bambuddy pausa las transferencias a esa impresora durante cinco minutos y vuelve a por el archivo cuando termina la pausa, de modo que un episodio breve se resuelve por sí solo; una ficha que sigue vacía significa que el rechazo duró más que el reintento. Todavía no se sabe qué lo provoca. Si se repite, active el registro de depuración en la página Sistema y adjunte un paquete de soporte a su informe.`,titleFtpTransferFailed:`Algunas impresiones recientes no se pudieron archivar: la transferencia del archivo agotó su tiempo`,bodyFtpTransferFailed:`El archivo laminado estaba en la tarjeta de la impresora y la impresora lo sirvió, pero la transferencia no terminó en el tiempo permitido. Al iniciar la impresión la impresora también atiende su cámara, sus mensajes de estado y la subida del trabajo, y un 3MF grande no siempre consigue pasar con todo eso. Esas impresiones siguen archivadas con su nombre y sus tiempos, solo que sin miniatura ni metadatos del laminador. No es un ajuste del laminador ni algo que usted haya cambiado. Bambuddy vuelve a por el archivo tres veces durante los diez minutos siguientes, así que la mayoría se completan solas; una tarjeta que sigue vacía significa que todos esos intentos también agotaron su tiempo. Si se repite, aumente Tiempo de espera de conexión en Ajustes > Red > Reintento FTP.`,dismissLabel:`Descartar este aviso`},searchPlaceholder:`Buscar archivos...`,filterByPrinter:`Filtrar por impresora`,filterByStatus:`Filtrar por estado`,sortBy:`Ordenar por`,sortNewest:`Más recientes primero`,sortOldest:`Más antiguos primero`,sortName:`Nombre`,sortDuration:`Duración`,sortLargest:`Mayores primero`,sortSmallest:`Menores primero`,sortSize:`Tamaño`,noArchives:`No se encontraron archivos`,noArchivesSearch:`Ningún archivo coincide con su búsqueda`,originalPrintNotVisible:`La impresión original no está visible - pruebe a borrar los filtros`,noArchivesYet:`Aún no hay archivos`,prints:`impresiones`,pagination:{showing:`Mostrando`,to:`a`,of:`de`,show:`Mostrar`,page:`Página`,all:`Todos`},loadingArchives:`Cargando archivos...`,releaseToUpload:`Suelte para subir`,showAll:`Mostrar todos`,showFavoritesOnly:`Mostrar solo favoritos`,gridView:`Vista de cuadrícula`,listView:`Vista de lista`,calendarView:`Vista de calendario`,logView:`Registro de impresión`,manageTags:`Gestionar etiquetas`,showFailedPrints:`Mostrar impresiones fallidas`,hideFailedPrints:`Ocultar impresiones fallidas`,hideDuplicates:`Ocultar duplicados`,viewOriginalPrint:`Haga clic para ver la impresión original (n.º {{id}})`,printTime:`Tiempo de impresión`,filamentUsed:`Filamento usado`,cost:`Coste`,preview:`Vista previa`,deleteArchive:`Eliminar archivo`,deleteConfirm:`¿Está seguro de que desea eliminar este archivo?`,favorite:`Favorito`,unfavorite:`Quitar de favoritos`,viewDetails:`Ver detalles`,status:{completed:`Completada`,failed:`Fallida`,stopped:`Detenida`},toast:{source3mfAttached:`3MF de origen adjuntado: {{filename}}`,failedUploadSource3mf:`Error al subir el 3MF de origen`,source3mfRemoved:`3MF de origen eliminado`,failedRemoveSource3mf:`Error al eliminar el 3MF de origen`,f3dAttached:`F3D adjuntado: {{filename}}`,failedUploadF3d:`Error al subir el F3D`,f3dRemoved:`F3D eliminado`,failedRemoveF3d:`Error al eliminar el F3D`,timelapseAttached:`Time-lapse adjuntado: {{filename}}`,timelapseAlreadyAttached:`El time-lapse ya está adjuntado`,noMatchingTimelapse:`No se encontró ningún time-lapse coincidente`,failedScanTimelapse:`Error al buscar el time-lapse`,failedAttachTimelapse:`Error al adjuntar el time-lapse`,timelapseRemoved:`Time-lapse eliminado`,failedRemoveTimelapse:`Error al eliminar el time-lapse`,timelapseUploaded:`Time-lapse subido: {{filename}}`,failedUploadTimelapse:`Error al subir el time-lapse`,archiveDeleted:`Archivo eliminado`,failedDeleteArchive:`Error al eliminar el archivo`,addedToFavorites:`Añadido a favoritos`,removedFromFavorites:`Quitado de favoritos`,projectUpdated:`Proyecto actualizado`,failedUpdateProject:`Error al actualizar el proyecto`,linkCopied:`Enlace copiado al portapapeles`,failedCopyLink:`Error al copiar el enlace`,photoDeleted:`Foto eliminada`,failedDeletePhoto:`Error al eliminar la foto`,failedDeleteArchives:`Error al eliminar los archivos`,failedUpdateFavorites:`Error al actualizar los favoritos`,exportDownloaded:`Exportación descargada`,exportFailed:`Error en la exportación`},menu:{print:`Imprimir`,openInBambuStudio:`Abrir en el laminador`,slice:`Laminar`,externalLink:`Enlace externo`,viewOnMakerWorld:`Ver en MakerWorld`,preview3d:`Vista previa 3D`,viewTimelapse:`Ver time-lapse`,scanForTimelapse:`Buscar time-lapse`,uploadTimelapse:`Subir time-lapse`,removeTimelapse:`Eliminar time-lapse`,downloadSource3mf:`Descargar 3MF de origen`,uploadSource3mf:`Subir 3MF de origen`,replaceSource3mf:`Reemplazar 3MF de origen`,removeSource3mf:`Eliminar 3MF de origen`,uploadF3d:`Subir F3D`,replaceF3d:`Reemplazar F3D`,downloadF3d:`Descargar F3D`,removeF3d:`Eliminar F3D`,download:`Descargar`,copyDownloadLink:`Copiar enlace de descarga`,qrCode:`Código QR`,viewPhotos:`Ver fotos`,viewPhotosCount:`Ver fotos ({{count}})`,projectPage:`Página del proyecto`,addToFavorites:`Añadir a favoritos`,removeFromFavorites:`Quitar de favoritos`,edit:`Editar`,printLog:`Registro de impresión`,goToProject:`Ir al proyecto: {{name}}`,addToProject:`Añadir al proyecto`,removeFromProject:`Quitar del proyecto`,loading:`Cargando...`,noProjectsAvailable:`No hay proyectos disponibles`,searchProjects:`Buscar proyectos…`,select:`Seleccionar`,deselect:`Deseleccionar`,delete:`Eliminar`},permission:{noReprint:`No tiene permiso para reimprimir este archivo`,noAddToQueue:`No tiene permiso para añadir a la cola`,noUpdateArchives:`No tiene permiso para actualizar archivos`,noUploadFiles:`No tiene permiso para subir archivos`,noDownload:`No tiene permiso para descargar archivos`,noCopyLink:`No tiene permiso para copiar enlaces de descarga`,noDelete:`No tiene permiso para eliminar este archivo`,noEdit:`No tiene permiso para editar esta entrada`,noCreate:`No tiene permiso para crear archivos`},platePicker:{title:`Seleccione la cama para la vista previa`,hint:`Este archivo tiene varias camas. Elija una para abrirla en el visor de G-code.`,plateLabel:`Cama {{index}}`,objectCount:`{{count}} objeto`,objectCount_plural:`{{count}} objetos`,noGcode:`Este archivo no tiene G-code laminado para previsualizar. Ábralo en Bambu Studio para laminarlo primero.`},card:{previousPlate:`Cama anterior`,nextPlate:`Cama siguiente`,plateNumber:`Cama {{index}}`,moreOptions:`Haga clic con el botón derecho para más opciones`,addToFavorites:`Añadir a favoritos`,removeFromFavorites:`Quitar de favoritos`,cancelled:`cancelada`,failed:`fallida`,duplicate:`duplicado`,duplicateTitle:`Este modelo ya se ha impreso anteriormente`,openSource3mf:`Abrir el 3MF de origen en Bambu Studio (clic derecho para más opciones)`,downloadF3d:`Descargar el archivo de diseño de Fusion 360`,viewTimelapse:`Ver time-lapse`,viewPhoto:`Ver 1 foto`,viewPhotos:`Ver {{count}} fotos`,openFolder:`Abrir carpeta: {{name}}`,slicedFile:`Archivo laminado - listo para imprimir`,sourceFile:`Solo archivo de origen - no hay mapeo de AMS disponible`,gcode:`GCODE`,source:`ORIGEN`,project:`Proyecto: {{name}}`,runsBadge:`{{count}} impresiones`,runsBadgeTitle:`{{count}} impresiones en total — {{successful}} con éxito, {{failed}} fallidas. Haga clic para ver el registro completo de impresión.`,estimated:`Estimado: {{time}}`,actual:`Real: {{time}}`,accuracy:`Precisión: {{percent}}%`,filament:`{{weight}} g`,layer:`{{count}} capa`,layers:`{{count}} capas`,object:`{{count}} objeto`,objects:`{{count}} objetos`,slicedFor:`Laminado para {{model}}`,uploadedBy:`Subido por`,noPermissionReprint:`No tiene permiso para reimprimir`,noFileForReprint:`No hay archivo 3MF disponible — no se pudo descargar el archivo de la impresora cuando se registró la impresión`,slicerAmsMapping:`Mapeo de AMS guardado ({{printer}})`,slicerAmsMappingTooltip:`La elección de ranura AMS del slicer se guardó para {{printer}}. Los números de ranura solo significan algo en esa impresora, así que una reimpresión los reutiliza únicamente si vuelve a dirigirse a {{printer}}.`,noPermissionEdit:`No tiene permiso para editar archivos`,noPermissionDelete:`No tiene permiso para eliminar archivos`,openInBambuStudio:`Abrir en el laminador`,openInBambuStudioToSlice:`Abrir en el laminador para laminar`,slice:`Laminar`,externalLink:`Enlace externo`,makerWorld:`MakerWorld: {{designer}}`,viewProject:`Ver proyecto`,noExternalLink:`Sin enlace externo`,preview3d:`Vista previa 3D`,download:`Descargar`,edit:`Editar`,delete:`Eliminar`},runLog:{title:`Registro de impresión`,modalTitle:`Registro de impresión — {{name}}`,modalTitleFallback:`este archivo`,empty:`Aún no se han registrado eventos de impresión para este archivo.`,col:{date:`Fecha`,status:`Estado`,duration:`Duración`,filament:`Filamento`,cost:`Coste`},status:{completed:`Completada`,failed:`Fallida`,cancelled:`Cancelada`,stopped:`Detenida`,skipped:`Omitida`,printing:`Imprimiendo`}},modal:{deleteArchive:`Eliminar archivo`,deleteConfirm:`¿Está seguro de que desea eliminar "{{name}}"? Esta acción no se puede deshacer.`,deleteButton:`Eliminar`,deletePurgeStats:`Eliminar también esta impresión de las estadísticas rápidas (filamento, tiempo, coste, energía)`,deleteQueueItemsWarning:`También se eliminarán {{count}} elemento(s) de la cola vinculado(s) a este archivo.`,deleteBlockedByPrinting:`No se puede eliminar — {{count}} elemento(s) de la cola se están imprimiendo. Detén la impresión primero y vuelve a intentarlo.`,removeSource3mf:`Eliminar 3MF de origen`,removeSource3mfConfirm:`¿Está seguro de que desea eliminar el archivo 3MF de origen de "{{name}}"? Esto eliminará el archivo de proyecto original del laminador.`,removeButton:`Eliminar`,removeF3d:`Eliminar F3D`,removeF3dConfirm:`¿Está seguro de que desea eliminar el archivo de diseño de Fusion 360 de "{{name}}"?`,removeTimelapse:`Eliminar time-lapse`,removeTimelapseConfirm:`¿Está seguro de que desea eliminar el vídeo time-lapse de "{{name}}"?`,timelapse:`{{name}} - Time-lapse`,selectTimelapse:`Seleccionar time-lapse`,selectTimelapseDesc:`No se encontró ninguna coincidencia automática. Seleccione el time-lapse para esta impresión:`,deleteArchives:`Eliminar archivos`,deleteArchivesConfirm:`¿Está seguro de que desea eliminar {{count}} archivo(s)? Esta acción no se puede deshacer.`,deleteCount:`Eliminar {{count}}`},page:{title:`Archivos`,printsCount:`{{filtered}} de {{total}} impresiones`,dropFilesHere:`Suelte aquí los archivos .3mf`,releaseToUpload:`Suelte para subir`,only3mfSupported:`Solo se admiten archivos .3mf`,close:`Cerrar`,selected:`{{count}} seleccionados`,selectAll:`Seleccionar todo`,tags:`Etiquetas`,project:`Proyecto`,favorite:`Favorito`,delete:`Eliminar`,toggledFavorites:`Se cambió el estado de favorito de {{count}} archivo(s)`,failedUpdateFavorites:`Error al actualizar los favoritos`,archivesDeleted:`{{count}} archivo(s) eliminado(s)`,failedDeleteArchives:`Error al eliminar los archivos`,photoDeleted:`Foto eliminada`,failedDeletePhoto:`Error al eliminar la foto`},list:{name:`Nombre`,printer:`Impresora`,date:`Fecha`,size:`Tamaño`,actions:`Acciones`,hasTimelapse:`Tiene time-lapse`},log:{date:`Fecha`,printName:`Nombre de la impresión`,printer:`Impresora`,user:`Usuario`,status:`Estado`,duration:`Duración`,filament:`Filamento`,filamentUsed:`Filamento usado`,cost:`Coste`,energy:`Energía`,energyCost:`Coste de energía`,completedAt:`Finalizado`,columns:`Columnas`,sortBy:`Ordenar por {{column}}`,allPrinters:`Todas las impresoras`,allUsers:`Todos los usuarios`,allStatuses:`Todos los estados`,cancelled:`Cancelada`,skipped:`Omitida`,dateFrom:`Desde`,dateTo:`Hasta`,noEntries:`No se encontraron entradas en el registro de impresión`,showing:`Mostrando {{count}} de {{total}} entradas`,rowsPerPage:`Filas`,page:`Página`,prev:`Anterior`,next:`Siguiente`,clearLog:`Borrar registro`,clearLogTitle:`Borrar el registro de impresión`,clearLogConfirm:`Todas las entradas del registro de impresión se eliminarán permanentemente. Los archivos y los elementos de la cola no se ven afectados. Esta acción no se puede deshacer. ¿Está seguro?`,clearLogButton:`Borrar todo`,cleared:`{{count}} entradas del registro borradas`,clearFailed:`Error al borrar el registro de impresión`,deleteEntryTitle:`Eliminar entrada del registro de impresión`,deleteEntryConfirm:`Esta entrada se eliminará del registro y sus contribuciones de filamento, tiempo y costo desaparecerán de las estadísticas rápidas. El archivo correspondiente (si lo hay) no se ve afectado. Esta acción no se puede deshacer.`,entryDeleted:`Entrada del registro de impresión eliminada`,entryDeleteFailed:`Error al eliminar la entrada del registro de impresión`,editEntryTitle:`Editar entrada del registro de impresión`,editEntryDescription:`Clasifica esta impresión. El widget de Análisis de fallos agrupa por estos valores, por lo que las actualizaciones se reflejan en las estadísticas de inmediato.`,entryUpdated:`Entrada del registro actualizada`,entryUpdateFailed:`No se pudo actualizar la entrada del registro`,statuses:{completed:`Completada`,failed:`Fallida`,stopped:`Detenida`,cancelled:`Cancelada`,skipped:`Omitida`}}},dispatchToast:{untitled:`Trabajo de impresión`,startingPrints:`Iniciando impresiones`,progressSummary:`{{complete}}/{{total}} listas • Procesando: {{processing}}`,expandDetails:`Expandir detalles del despacho`,collapseDetails:`Contraer detalles del despacho`,awaitingPrinter:`Esperando a la impresora…`,status:{processing:`Procesando`,completed:`Completada`,failed:`Fallida`},failed:{generic:`Despacho fallido`,upload_failed:`Fallo al subir a la impresora`,start_command_failed:`La impresora rechazó el comando de inicio`},dismiss:`Cerrar`},pipelineRuns:{title:`Ejecuciones de pipeline`,loading:`Cargando…`,empty:`Aún no hay ejecuciones de pipeline.`,filter:{pipeline:`Pipeline`,status:`Estado`,target:`Destino`,all:`Todas`,allPipelines:`Todas las pipelines`,allStatus:`Todos los estados`,allTargets:`Todos los destinos`,clear:`Limpiar filtros`,noMatches:`Ninguna ejecución coincide con los filtros actuales.`},totalCount_one:`{{n}} ejecución`,totalCount_other:`{{n}} ejecuciones`,copies:`{{n}} copias`,failedCount:`{{n}} fallidas`,copyN:`Copia {{n}}`,retryFailed:`Reintentar fallidas`,retryOf:`reintento de #{{n}}`,pagination:`{{start}}–{{end}} de {{total}}`,toast:{cancelled:`Ejecución cancelada`,cancelFailed:`Cancelación fallida`,retryStarted:`Reintento iniciado`,retryFailed:`Reintento fallido`,cleared:`{{n}} ejecuciones eliminadas`,clearFailed:`Error al borrar`},clearLog:`Borrar historial`,clearConfirmTitle:`¿Borrar historial?`,clearConfirmBody:`¿Eliminar todas las ejecuciones de pipeline completadas, fallidas, canceladas y con fallos parciales? Las ejecuciones en curso se conservan. Esto no se puede deshacer.`,clearConfirmAction:`Borrar`,jobStatus:{pending:`pendiente`,awaiting_printer:`esperando impresora`,queued:`en cola`,printing:`imprimiendo`,completed:`completada`,failed:`fallida`,cancelled:`cancelada`},cancelledByUser:`Cancelado por el usuario`},queue:{filamentShort:{rowBadge:`Filamento insuficiente para la bobina asignada`,rowTooltip:`El planificador marco este elemento. Pulsa Reproducir para ver el deficit por slot y decidir si imprimir de todos modos.`,confirmTitle:`Filamento insuficiente`,confirmIntro:`La bobina asignada no puede cubrir al menos un slot. Imprimir de todos modos?`,lineItem:`Slot {{slot}}: necesita {{required}} g, quedan {{remaining}} g`,unknown:`desconocido`,printAnyway:`Imprimir de todos modos`},slicerAmsMapping:{rowBadge:`Ranuras AMS guardadas para esta impresora`,rowTooltip:`Este archivo conserva las ranuras AMS exactas que eligió el slicer, guardadas para la impresora de este elemento. Una reimpresión en ella puede reutilizar esas bobinas en lugar de volver a emparejar por tipo y color.`},title:`Cola de impresión`,subtitle:`Programe y gestione sus trabajos de impresión`,editQueueItem:`Editar elemento de la cola`,selectAllPlates:`Seleccionar las {{count}} camas`,deselectAll:`Deseleccionar todo`,printQueued:`Impresión encolada`,printQueuedWillStartWhenIdle:`Comenzará cuando la impresora esté inactiva`,itemsQueued:`{{count}} elementos encolados`,sending:`Enviando...`,sendingProgress:`Enviando {{current}}/{{total}}...`,adding:`Añadiendo...`,addingProgress:`Añadiendo {{current}}/{{total}}...`,savingProgress:`Guardando {{current}}/{{total}}...`,clearQueue:`Vaciar la cola`,clearHistory:`Borrar el historial`,emptyQueue:`La cola está vacía`,position:`Posición`,scheduledTime:`Hora programada`,moveUp:`Subir`,moveDown:`Bajar`,startNow:`Iniciar ahora`,printingInProgress:`Impresión en curso...`,viewArchive:`Ver archivo`,viewInFileManager:`Ver en el gestor de archivos`,itemCount:`{{count}} elemento`,itemCount_plural:`{{count}} elementos`,dragToReorder:`Arrastre para reordenar (solo elementos «lo antes posible»)`,reorderHint:`La posición solo afecta a los elementos «lo antes posible». Los elementos programados se ejecutan a su hora establecida.`,sjf:{label:`SJF`,tooltip:`Trabajo más corto primero — el planificador prioriza las impresiones más cortas`},addedBy:`Añadido por {{name}}`,nextInQueue:`Siguiente en la cola`,clearPlateSuccess:`Cama despejada — lista para la próxima impresión`,plateNumber:`Cama {{index}}`,quantity:`Cantidad`,quantityHint:`Crea {{count}} elementos en la cola`,plateQuantityLabel:`Impresiones de {{plate}}`,plateQuantityTotal_one:`{{count}} impresión en total`,plateQuantityTotal_other:`{{count}} impresiones en total`,batchOrders:{title:`Pedidos por lotes`,emptyTitle:`Sin pedidos por lotes`,emptyDescription:`Pon en cola un archivo de varias bandejas, o más de una copia de una bandeja, y el pedido aparecerá aquí con su progreso.`,filter:{active:`Activos`,completed:`Completados`,cancelled:`Cancelados`,all:`Todos`},status:{active:`Activo`,completed:`Completado`,cancelled:`Cancelado`},noTargets:`Solo agrupación`,noTargetsHint:`Creado antes de que existieran las cantidades por bandeja, así que sigue las impresiones en cola en lugar de un objetivo.`,dispatchRemaining:`Encolar {{count}} restantes`,dispatchPlate:`Encolar restantes`,strandedPlate:`No queda de dónde copiar los ajustes`,strandedNotice:`No se pueden encolar {{runs}} de las {{owed}} impresiones aún pendientes: esa cama ya no tiene ninguna impresión encolada o terminada de la que copiar los ajustes. Encola la cama una vez desde el archivo o cancela el pedido.`,dispatched:`Impresiones restantes encoladas para {{name}}`,plateProgress:`{{completed}} de {{target}} hechas`,remaining:`{{count}} pendientes`,failed:`{{count}} fallidas`,printing:`{{count}} imprimiendo`,wholeFile:`Archivo completo`,due:`Vence {{date}}`,costSoFar:`{{amount}} hasta ahora`,costRemaining:`({{amount}} por gastar)`},activeBatches:`Lotes activos`,batchProgress:`{{completed}} de {{total}} completados`,cancelBatch:`Cancelar los restantes`,batchCancelled:`Elementos restantes del lote cancelados`,cancelBatchConfirmTitle:`Cancelar lote`,cancelBatchConfirmMessage:`¿Cerrar este pedido? Las impresiones que sigan en la cola se cancelan y deja de reclamar lo que no ha producido.`,batch:{defaultName:`Lote`,label:`{{count}} elemento`,label_plural:`{{count}} elementos`,pendingCount:`{{count}} pendiente`,pendingCount_plural:`{{count}} pendientes`,expand:`Expandir lote`,collapse:`Contraer lote`,groupAsBatch:`Agrupar como lote…`,groupAsBatchDescription:`Combinar los {{count}} elementos seleccionados en un único lote contraíble.`,nameLabel:`Nombre del lote`,namePlaceholder:`p. ej., Regalos del viernes`,create:`Crear lote`,ungroup:`Desagrupar`,ungroupConfirmTitle:`¿Desagrupar lote?`,ungroupConfirmMessage:`Los elementos permanecerán en la cola pero ya no estarán agrupados.`,dragGroup:`Arrastrar grupo`},tabs:{batches:`Lotes`,queue:`Cola`,history:`Historial`,timeline:`Cronología`,pipelines:`Procesos`},layout:{flatList:`Lista`,byPrinter:`Por impresora`,groupByPrinter:`Agrupar por impresora`},history:{emptyTitle:`Sin historial todavía`,emptyDescription:`Las impresiones completadas, canceladas y fallidas aparecerán aquí.`,showMore:`Mostrar más`,showingCount:`Mostrando {{shown}} de {{total}}`},dragGhost:{multiCount:`{{count}} elementos`,batch:`{{name}} ({{count}} copia)`,batch_plural:`{{name}} ({{count}} copias)`},sections:{currentlyPrinting:`Imprimiendo actualmente`,queued:`En cola`,history:`Historial`},status:{pending:`Pendiente`,waiting:`En espera`,printing:`Imprimiendo`,paused:`En pausa`,completed:`Completada`,failed:`Fallida`,skipped:`Omitida`,cancelled:`Cancelada`},summary:{printing:`Imprimiendo`,queued:`En cola`,totalTime:`Tiempo total de la cola`,totalWeight:`Peso total de la cola`,history:`Historial`},filter:{allPrinters:`Todas las impresoras`,unassigned:`Sin asignar`,allStatus:`Todos los estados`,allLocations:`Todas las ubicaciones`,any:`Cualquiera`},sort:{byPosition:`Ordenar por posición`,byName:`Ordenar por nombre`,byPrinter:`Ordenar por impresora`,bySchedule:`Ordenar por programación`,byDate:`Ordenar por fecha`,ascendingOldest:`Ascendente (más antiguos primero)`,descendingNewest:`Descendente (más recientes primero)`},badges:{staged:`Preparado`,requiresPrevious:`Requiere éxito previo`,autoPowerOff:`Apagado automático`,gcodeInjection:`G-code`},empty:{title:`No hay impresiones programadas`,description:`Programe una impresión desde la página de Archivos con la opción «Programar» del menú contextual, o arrastre y suelte archivos para empezar.`},time:{etaIfStartedNow:`Hora de finalización si este trabajo comenzara ahora`,whenFree:`Cuando haya una impresora libre`,overdue:`Atrasada`,now:`Ahora`,lessThanMinute:`En menos de un minuto`,inMinutes:`En {{count}} min`,inHours:`En {{count}} horas`},actions:{startPrint:`Iniciar impresión`,stopPrint:`Detener impresión`,requeue:`Volver a encolar`},bulkEdit:{title:`Editar {{count}} elemento`,title_plural:`Editar {{count}} elementos`,description:`Solo se aplicarán los ajustes modificados a los elementos seleccionados.`,printer:`Impresora`,noChange:`— Sin cambios —`,queueOptions:`Opciones de la cola`,staged:`Preparado (inicio manual)`,autoPowerOff:`Apagado automático tras la impresión`,requirePrevious:`Requerir éxito previo`,gcodeInjection:`Inyectar G-code`,printOptions:`Opciones de impresión`,bedLevelling:`Nivelación de la cama`,flowCalibration:`Calibración del flujo`,vibrationCalibration:`Calibración de vibración`,layerInspection:`Inspección de la primera capa`,timelapse:`Time-lapse`,useAms:`Usar AMS`,nozzleOffsetCali:`Calibración del offset de boquillas`,applyChanges:`Aplicar cambios`,selectAll:`Seleccionar todo`,deselectAll:`Deseleccionar todo`,selected:`{{count}} seleccionados`,editSelected:`Editar seleccionados`,cancelSelected:`Cancelar seleccionados`},confirm:{cancelTitle:`Cancelar impresión programada`,cancelMessage:`¿Está seguro de que desea cancelar "{{name}}"?`,stopTitle:`Detener impresión`,stopMessage:`¿Está seguro de que desea detener la impresión actual "{{name}}"? Esto cancelará el trabajo de impresión en la impresora.`,removeTitle:`Quitar del historial`,removeMessage:`¿Está seguro de que desea quitar "{{name}}" del historial de la cola?`,clearHistoryTitle:`Borrar el historial`,clearHistoryMessage:`¿Está seguro de que desea quitar los {{count}} elemento(s) del historial?`,cancelButton:`Cancelar impresión`,stopButton:`Detener impresión`,thisPrint:`esta impresión`,thisItem:`este elemento`},toast:{cancelled:`Elemento de la cola cancelado`,cancelFailed:`Error al cancelar el elemento`,removed:`Elemento de la cola eliminado`,keptForOrder:`Cancelado en lugar de eliminado: es la única impresión desde la que el pedido puede volver a encolar esta cama`,historyKeptForOrders:`Se conservan {{kept}} que los pedidos todavía necesitan.`,removeFailed:`Error al eliminar el elemento`,stopped:`Impresión detenida`,stopFailed:`Error al detener la impresión`,released:`Impresión liberada a la cola`,startFailed:`Error al iniciar la impresión`,reorderFailed:`Error al reordenar la cola`,historyCleared:`Se borraron {{count}} elemento(s) del historial`,clearHistoryFailed:`Error al borrar el historial`,updateFailed:`Error al actualizar los elementos`,bulkCancelled:`Se cancelaron {{count}} elemento(s)`,bulkCancelFailed:`Error al cancelar los elementos`,batchCreated:`Lote "{{name}}" creado`,batchCreateFailed:`Error al crear el lote`,batchUngrouped:`{{count}} elemento(s) desagrupado(s)`,batchUngroupFailed:`Error al desagrupar el lote`,resumedAfterFailure:`Cola reanudada — {{restored}} trabajo(s) restaurado(s) a pendientes`,resumeAfterFailureFailed:`Error al reanudar la cola`},resumeAfterFailure:{banner:`{{printer}} está bloqueado por un fallo de impresión previo — {{count}} trabajo(s) omitido(s)`,bannerHint:`Soluciona el problema de la impresora y reanuda para restaurar los trabajos omitidos y limpiar el bloqueo.`,button:`Reanudar tras fallo`,confirmTitle:`¿Reanudar la cola tras el fallo?`,confirmMessage:`Restaurar {{count}} trabajo(s) omitido(s) en {{printer}} a pendientes y limpiar el bloqueo del trabajo anterior. Asegúrate de que la impresora esté lista antes de continuar.`},timeline:{listView:`Lista`,timelineView:`Cronología`,unassigned:`Sin asignar`,noData:`No hay impresiones programadas para este día`,nothingCommitted:`No hay programaciones comprometidas en esta ventana. Los elementos preparados, los elementos en espera y los trabajos ASAP en impresoras inactivas no se muestran — establece una hora programada o libera un elemento preparado para verlo aquí.`,allDoneBy:`Todas las impresiones estimadas para las {{time}}`,staged:`Preparado`,filterAll:`Mostrar todo`,filterPrinting:`Imprimiendo`,filterQueued:`En cola`,time:{anyMoment:`en cualquier momento`,minutesLeft:`{{minutes}} min restantes`,hoursLeft:`{{hours}} h restantes`,hoursMinutesLeft:`{{hours}} h {{minutes}} min restantes`},day:{previous:`Día anterior`,next:`Día siguiente`,today:`Hoy`},window:{back12h:`12 horas atrás`,forward12h:`12 horas adelante`,now:`Ahora`},printerColumnHeader:`Impresora`},permissions:{noStopPrint:`No tiene permiso para detener impresiones`,noStartPrint:`No tiene permiso para iniciar impresiones`,noEdit:`No tiene permiso para editar este elemento de la cola`,noCancel:`No tiene permiso para cancelar este elemento de la cola`,noRequeue:`No tiene permiso para volver a encolar elementos`,noRemove:`No tiene permiso para eliminar este elemento de la cola`,noClearHistory:`No tiene permiso para borrar todo el historial`,noEditItems:`No tiene permiso para editar elementos de la cola`,noCancelItems:`No tiene permiso para cancelar elementos de la cola`}},stats:{title:`Estadísticas`,subtitle:`Arrastre los widgets para reorganizarlos. Haga clic en el icono del ojo para ocultarlos.`,overview:`Resumen`,totalPrints:`Impresiones totales`,successRate:`Tasa de éxito`,totalPrintTime:`Tiempo total de impresión`,printTime:`Tiempo de impresión`,totalFilament:`Filamento total usado`,filamentUsed:`Filamento usado`,filamentCost:`Coste del filamento`,totalCost:`Coste total`,energyUsed:`Energía usada`,energyCost:`Coste de la energía`,energyWarmingUpTooltip:`El seguimiento de energía aún está recopilando instantáneas horarias. Los totales por rango de fechas serán precisos una vez que exista al menos una instantánea antes del rango seleccionado. Los valores iniciales pueden quedarse cortos.`,averagePrintTime:`Tiempo medio de impresión`,printsPerDay:`Impresiones por día`,byPrinter:`Por impresora`,printsByPrinter:`Impresiones por impresora`,byMaterial:`Por material`,byMonth:`Por mes`,last7Days:`Últimos 7 días`,last30Days:`Últimos 30 días`,last90Days:`Últimos 90 días`,allTime:`Todo el tiempo`,quickStats:`Estadísticas rápidas`,printActivity:`Actividad de impresión`,filamentTypes:`Tipos de filamento`,filamentTrends:`Tendencias del filamento`,failureAnalysis:`Análisis de fallos`,timeAccuracy:`Precisión temporal`,successful:`Con éxito:`,failed:`Fallidas:`,cancelled:`Canceladas:`,perfectEstimate:`100% = estimación perfecta`,noTimeAccuracyData:`Aún no hay datos de precisión temporal`,noFilamentData:`No hay datos de filamento disponibles`,noPrinterData:`No hay datos de impresora disponibles`,noPrintData:`No hay datos de impresión disponibles`,noPrintDataLast30Days:`No hay datos de impresión en los últimos 30 días`,failureReasons:`Motivos de fallo`,topFailureReasons:`Principales motivos de fallo`,failedPrintsCount:`{{failed}} / {{total}} impresiones fallidas`,lastWeekRate:`Semana pasada: {{rate}}%`,resetLayout:`Restablecer disposición`,recalculateCosts:`Recalcular costes`,recalculateCostsHint:`Recalcular todos los costes de archivo usando los precios actuales del filamento`,exportStats:`Exportar estadísticas`,exportAsCsv:`Exportar como CSV`,exportAsExcel:`Exportar como Excel`,hiddenCount:`{{count}} ocultos`,exportDownloaded:`Exportación descargada`,exportFailed:`Error en la exportación`,layoutReset:`Disposición restablecida`,recalculatedCosts:`Costes recalculados para {{count}} archivos`,recalculateFailed:`Error al recalcular los costes`,loadingStats:`Cargando estadísticas...`,noPermissionResetLayout:`No tiene permiso para restablecer la disposición`,noPermissionRecalculate:`No tiene permiso para recalcular los costes`,noPrintDataInRange:`No hay datos de impresión en el rango seleccionado`,periodFilament:`Filamento del periodo`,periodCost:`Coste del periodo`,avgPerPrint:`Promedio por impresión`,usageOverTime:`Uso a lo largo del tiempo`,energyOverTime:`Energía a lo largo del tiempo`,filamentByWeight:`Peso`,printDuration:`Duración de la impresión`,printerUtilization:`Uso de la impresora`,filamentSuccess:`Éxito por material`,printHabits:`Hábitos de impresión`,printTimeOfDay:`Hora del día de impresión`,colorDistribution:`Distribución de colores`,noColorData:`No hay datos de color disponibles`,records:`Récords`,longestPrint:`Impresión más larga`,heaviestPrint:`Impresión más pesada`,mostExpensivePrint:`Más cara`,busiestDay:`Día más activo`,successStreak:`Racha de éxitos`,streakPrint:`impresión consecutiva`,streakPrints:`{{count}} impresiones consecutivas`,printerStats:`Estadísticas de la impresora`,hours:`horas`,avgPrints:`Impresiones medias`,noArchiveData:`No hay datos de impresión disponibles`,filamentByTime:`Tiempo`,avgWeight:`Peso medio`,avgTime:`Tiempo medio`,filamentByPrints:`Impresiones`,timeframe:{today:`Hoy`,"this-week":`Esta semana`,"this-month":`Este mes`,"last-7":`Últimos 7 días`,"last-30":`Últimos 30 días`,"last-90":`Últimos 90 días`,"this-year":`Este año`,"all-time":`Todo el tiempo`,custom:`Rango personalizado`,from:`Desde`,to:`Hasta`},allUsers:`Todos los usuarios`,noUser:`Sin usuario (sistema)`,filterByUser:`Filtrar por usuario`},maintenance:{title:`Mantenimiento`,overview:`Resumen`,allOk:`Todo el mantenimiento al día`,dueCount:`{{count}} tarea pendiente`,dueCount_plural:`{{count}} tareas pendientes`,warningCount:`{{count}} advertencia`,warningCount_plural:`{{count}} advertencias`,totalPrintTime:`Tiempo total de impresión`,nextMaintenance:`Próximo mantenimiento`,nothingDue:`Nada pendiente`,tasks:`Tareas`,lastPerformed:`Realizado por última vez`,interval:`Intervalo`,hoursRemaining:`{{hours}} h restantes`,hoursOverdue:`{{hours}} h de retraso`,markDone:`Marcar como hecho`,performMaintenance:`Realizar mantenimiento`,history:`Historial`,noHistory:`No hay historial de mantenimiento`,editPrintHours:`Editar horas de impresión`,currentHours:`Horas actuales`,statusTab:`Estado`,settingsTab:`Ajustes`,overdueCount:`{{count}} atrasadas`,dueSoonCount:`{{count}} pronto pendientes`,dueSoon:`Pronto pendiente`,allGood:`Todo correcto`,overdueBy:`Atrasado {{duration}}`,dueIn:`Pendiente en {{duration}}`,timeLeft:`{{duration}} restante`,day:`1 día`,days:`{{count}} días`,week:`1 semana`,weeks:`{{count}} semanas`,month:`1 mes`,months:`{{count}} meses`,year:`1 año`,maintenanceTypes:`Tipos de mantenimiento`,maintenanceTypesDescription:`Tipos del sistema y sus tareas de mantenimiento personalizadas`,addCustomType:`Añadir tipo personalizado`,restoreDefaults:`Restaurar tareas predeterminadas`,intervalType:`Tipo de intervalo`,intervalValue:`Intervalo ({{type}})`,icon:`Icono`,documentationLink:`Enlace de documentación (opcional)`,assignToPrinters:`Asignar a impresoras`,selectAtLeastOnePrinter:`Seleccione al menos una impresora`,addType:`Añadir tipo`,custom:`Personalizado`,printHours:`Horas de impresión`,calendarDays:`Días naturales`,exampleName:`p. ej., Reemplazar filtro HEPA`,viewDocumentation:`Ver documentación`,timeBasedInterval:`Intervalo basado en el tiempo`,intervalOverrides:`Anulaciones de intervalo`,intervalOverridesDescription:`Personalizar intervalos para impresoras concretas`,assignedToPrinters:`Asignado a las impresoras:`,noPrintersAssigned:`No hay impresoras asignadas`,addPrinterShort:`Añadir:`,printersAssignedClick:`{{count}} impresora(s) asignada(s) - haga clic para gestionar`,removeFromPrinter:`Quitar de esta impresora`,types:{lubricateCarbonRods:`Lubricar varillas de carbono`,lubricateRails:`Lubricar guías lineales`,cleanNozzle:`Limpiar boquilla/fusor`,checkBelts:`Comprobar la tensión de las correas`,cleanBuildPlate:`Limpiar la cama de impresión`,checkExtruder:`Comprobar los engranajes del extrusor`,checkCooling:`Comprobar los ventiladores de refrigeración`,generalInspection:`Inspección general`,cleanCarbonRods:`Limpiar varillas de carbono`,lubricateSteelRods:`Lubricar varillas de acero`,cleanSteelRods:`Limpiar varillas de acero`,cleanLinearRails:`Limpiar guías lineales`,checkPtfeTube:`Comprobar el tubo de PTFE`,replaceHepaFilter:`Reemplazar filtro HEPA`,replaceCarbonFilter:`Reemplazar filtro de carbono`,lubricateLeftNozzleRail:`Lubricar la guía de la boquilla izquierda`},maintenanceComplete:`Mantenimiento marcado como completado`,typeUpdated:`Tipo de mantenimiento actualizado`,typeDeleted:`Tipo de mantenimiento eliminado`,defaultsRestored:`Se restauraron {{count}} tarea(s) predeterminada(s)`,printHoursUpdated:`Horas de impresión actualizadas`,printerAssigned:`Impresora asignada`,printerRemoved:`Impresora eliminada`,deleteTypeConfirm:`¿Eliminar "{{name}}"?`,deleteSystemTypeTitle:`¿Eliminar la tarea de mantenimiento predeterminada?`,deleteSystemTypeMessage:`¿Está seguro de que desea eliminar la tarea de mantenimiento predeterminada "{{name}}"?`,noPermissionUpdate:`No tiene permiso para actualizar elementos de mantenimiento`,noPermissionPerform:`No tiene permiso para realizar mantenimiento`,noPermissionEditTypes:`No tiene permiso para editar tipos de mantenimiento`,noPermissionDeleteTypes:`No tiene permiso para eliminar tipos de mantenimiento`,noPermissionEditHours:`No tiene permiso para editar las horas de impresión`,noPermissionRemovePrinter:`No tiene permiso para quitar asignaciones de impresoras`,noPermissionAssignPrinter:`No tiene permiso para asignar impresoras`,noPermissionEditIntervals:`No tiene permiso para editar intervalos`,configureSettings:`Configurar tipos e intervalos de mantenimiento`},settings:{sliceEngine:`Motor de laminado`,sliceEngineSidecar:`Sidecar del servidor`,sliceEngineSidecarHint:`El laminado se ejecuta en el servidor, en el contenedor sidecar del laminador.`,sliceEngineBrowser:`En el navegador`,sliceEngineBrowserHint:`El laminado se ejecuta en este dispositivo, sin servidor.`,title:`Ajustes`,general:`General`,tabs:{general:`General`,smartPlugs:`Enchufes inteligentes`,sensors:`Sensores`,notifications:`Notificaciones`,queue:`Flujo de trabajo`,queueDispatch:`Cola y Despacho`,queuePipelines:`Pipelines`,filament:`Filamento`,network:`Red`,apiKeys:`Claves API`,virtualPrinter:`Impresora virtual`,spoolbuddy:`SpoolBuddy`,failureDetection:`Detección de fallos`,users:`Autenticación`,backup:`Copia de seguridad`,emailAuth:`Autenticación por correo`,ldap:`LDAP`,twoFa:`Autenticación de dos factores`,oidc:`SSO / OIDC`,security:`Seguridad`},spoolbuddy:{infoTitle:`Dispositivos SpoolBuddy`,infoBody:`Los quioscos SpoolBuddy se registran automáticamente mediante una señal de latido. Anule el registro de un dispositivo aquí si ya no está en uso o si quedó un duplicado obsoleto tras el fallo de un demonio.`,duplicatesTitle:`{{count}} dispositivos registrados`,duplicatesBody:`La interfaz del quiosco solo usa el primer dispositivo registrado. Si uno de estos es un duplicado obsoleto de un fallo, anule su registro — un dispositivo en línea se volverá a registrar en su próxima señal de latido.`,empty:`Aún no hay dispositivos SpoolBuddy registrados.`,online:`En línea`,offline:`Desconectado`,unregister:`Anular registro`,unregisterSuccess:`Registro del dispositivo anulado`,unregisterError:`Error al anular el registro del dispositivo`,confirmTitle:`¿Anular el registro del dispositivo SpoolBuddy?`,confirmBody:`Esto eliminará "{{hostname}}" ({{deviceId}}) de la base de datos. Si el dispositivo está en línea, se volverá a registrar en su próxima señal de latido.`,ipAddress:`Dirección IP`,firmware:`Firmware`,lastSeen:`Visto por última vez`,daemonUptime:`Tiempo de actividad del demonio`,systemUptime:`Tiempo de actividad del sistema`,never:`nunca`,nfc:`NFC`,scale:`Báscula`,cpuTemp:`Temp. de CPU`,cpuLoad:`Carga de CPU`,memory:`Memoria`,disk:`Disco`,update:`Actualizar`,updateConfirmTitle:`¿Actualizar el demonio de Spoolbuddy?`,updateConfirmBody:`¿Iniciar una actualización de software en "{{hostname}}"? El demonio se reiniciará una vez aplicada la actualización.`,restartBrowser:`Reiniciar navegador`,restartBrowserConfirmTitle:`¿Reiniciar el navegador del quiosco?`,restartBrowserConfirmBody:`¿Reiniciar el navegador del quiosco en "{{hostname}}"? La pantalla se quedará en negro brevemente.`,restartDaemon:`Reiniciar demonio`,restartDaemonConfirmTitle:`¿Reiniciar el demonio de Spoolbuddy?`,restartDaemonConfirmBody:`¿Reiniciar el demonio de Spoolbuddy en "{{hostname}}"? El dispositivo se desconectará durante unos segundos.`,reboot:`Reiniciar`,rebootConfirmTitle:`¿Reiniciar el dispositivo?`,rebootConfirmBody:`¿Reiniciar "{{hostname}}"? El dispositivo estará desconectado durante alrededor de un minuto.`,shutdown:`Apagar`,shutdownConfirmTitle:`¿Apagar el dispositivo?`,shutdownConfirmBody:`¿Apagar "{{hostname}}"? Necesitará acceso físico para volver a encenderlo.`,commandConfirm:`Confirmar`,commandQueued:`Comando encolado`,commandError:`Error al enviar el comando`},ldap:{title:`Autenticación LDAP`,enabledDesc:`La autenticación LDAP está activada`,disabledDesc:`La autenticación LDAP está desactivada`,disabledHint:`Configure y guarde los ajustes de LDAP a continuación y luego actívela.`,enabled:`Autenticación LDAP activada`,disabled:`Autenticación LDAP desactivada`,feature1:`Los usuarios pueden iniciar sesión con credenciales LDAP`,feature2:`La cuenta de administrador local permanece como alternativa`,feature3:`Los grupos LDAP se asignan a los grupos de Bambuddy al iniciar sesión`,serverConfig:`Configuración del servidor LDAP`,serverUrl:`URL del servidor`,serverUrlHint:`Use ldaps:// para SSL o ldap:// con StartTLS`,security:`Seguridad`,securityHint:`StartTLS actualiza una conexión sin cifrar a TLS. LDAPS usa TLS desde el principio.`,bindDn:`Bind DN (cuenta de servicio)`,bindPassword:`Contraseña de Bind`,searchBase:`DN base de búsqueda`,userFilter:`Filtro de búsqueda de usuarios`,userFilterHint:`{username} se sustituye por el nombre de usuario de inicio de sesión. Use (uid={username}) para OpenLDAP.`,advanced:`Avanzado`,autoProvision:`Aprovisionar usuarios automáticamente`,autoProvisionHint:`Crear automáticamente una cuenta de Bambuddy en el primer inicio de sesión LDAP`,defaultGroup:`Grupo predeterminado`,defaultGroupNone:`— Ninguno (sin alternativa) —`,defaultGroupHint:`Grupo alternativo asignado cuando un usuario LDAP se autentica pero no figura en ningún grupo LDAP asignado. Déjelo vacío para dejar a los usuarios sin asignar sin permisos.`,groupMapping:`Asignación de grupos (JSON)`,groupMappingHint:`Asignar los DN de grupos LDAP a los grupos de Bambuddy. Grupos disponibles: `,testConnection:`Probar conexión`,settingsSaved:`Ajustes de LDAP guardados`,errors:{serverRequired:`La URL del servidor LDAP es obligatoria`,searchBaseRequired:`El DN base de búsqueda es obligatorio`,enableAuthFirst:`Active primero la autenticación`,configureLdapFirst:`Guarde primero los ajustes de LDAP`}},email:{smtpSettings:`Configuración SMTP`,smtpHost:`Servidor SMTP`,smtpPort:`Puerto SMTP`,security:`Seguridad`,authentication:`Autenticación`,username:`Nombre de usuario`,password:`Contraseña`,fromEmail:`Correo del remitente`,fromName:`Nombre del remitente`,testConnection:`Probar conexión SMTP`,testRecipient:`Correo del destinatario de prueba`,sendTest:`Enviar correo de prueba`,sending:`Enviando...`,save:`Guardar ajustes`,saving:`Guardando...`,advancedAuth:`Autenticación avanzada`,advancedAuthEnabled:`La autenticación avanzada está activada`,advancedAuthEnabledDesc:`Las funciones de gestión de usuarios basadas en correo están activas. Los nuevos usuarios recibirán contraseñas autogeneradas por correo, y los usuarios podrán restablecer sus contraseñas mediante la función de contraseña olvidada.`,advancedAuthDisabled:`La autenticación avanzada está desactivada`,advancedAuthDisabledDesc:`Active la autenticación avanzada para habilitar las funciones basadas en correo para la gestión de usuarios.`,enable:`Activar`,disable:`Desactivar`,feature1:`Las contraseñas se autogeneran y se envían por correo a los nuevos usuarios`,feature2:`Los usuarios pueden iniciar sesión con el nombre de usuario o el correo`,feature3:`La función de contraseña olvidada está disponible`,feature4:`Los administradores pueden restablecer las contraseñas de los usuarios por correo`,errors:{requiredFields:`Rellene todos los campos obligatorios`,usernameRequired:`El nombre de usuario es obligatorio cuando la autenticación está activada`,enterTestEmail:`Introduzca una dirección de correo de prueba`,smtpServerAndEmail:`Rellene el servidor SMTP y el correo del remitente antes de probar`,usernamePasswordRequired:`El nombre de usuario y la contraseña son obligatorios cuando la autenticación está activada`,configureSmtpFirst:`Configure y pruebe primero los ajustes de SMTP`,enableAuthFirst:`Active primero la autenticación para usar las funciones basadas en correo.`},success:{settingsSaved:`Ajustes de SMTP guardados correctamente`},securityOptions:{starttls:`STARTTLS (puerto 587)`,ssl:`SSL/TLS (puerto 465)`,none:`Ninguna (puerto 25)`},authOptions:{enabled:`Activada`,disabled:`Desactivada`}},appearance:`Apariencia`,notifications:`Notificaciones`,smartPlugs:`Enchufes inteligentes`,spoolman:`Spoolman`,updates:`Actualizaciones`,language:`Idioma`,languageDescription:`Seleccione su idioma preferido`,theme:`Tema`,themeLight:`Claro`,themeDark:`Oscuro`,themeSystem:`Sistema`,defaultView:`Vista predeterminada`,defaultViewDescription:`Página que se muestra al abrir la aplicación`,checkForUpdates:`Buscar actualizaciones`,autoUpdate:`Actualización automática`,currentVersion:`Versión actual`,latestVersion:`Versión más reciente`,upToDate:`Está actualizado`,updateAvailable:`Actualización disponible`,notificationLanguage:`Idioma de las notificaciones`,notificationLanguageDescription:`Idioma de las notificaciones push`,bedCooledThreshold:`Umbral de cama enfriada`,bedCooledThresholdDescription:`Temperatura por debajo de la cual se considera que la cama se ha enfriado tras una impresión`,userNotificationsEnabled:`Notificaciones de usuario`,userNotificationsEnabledDescription:`Activa el menú de notificaciones de usuario y las notificaciones por correo de los eventos de los trabajos de impresión. Requiere autenticación avanzada.`,userNotificationsDisabledHint:`Active la autenticación avanzada para usar las notificaciones de usuario.`,notificationProviders:`Proveedores de notificaciones`,addProvider:`Añadir proveedor`,editProvider:`Editar proveedor`,providerType:`Tipo de proveedor`,testNotification:`Notificación de prueba`,testSuccess:`Notificación de prueba enviada correctamente`,testFailed:`Error al enviar la notificación de prueba`,quietHours:`Horas de silencio`,quietHoursDescription:`No molestar durante estas horas`,quietHoursStart:`Inicio`,quietHoursEnd:`Fin`,events:{title:`Eventos de notificación`,printStart:`Impresión iniciada`,printComplete:`Impresión completada`,printFailed:`Impresión fallida`,printStopped:`Impresión detenida`,printProgress:`Hitos de progreso`,printProgressDescription:`Notificar al 25%, 50% y 75%`,printerOffline:`Impresora desconectada`,printerError:`Error de la impresora`,filamentLow:`Filamento bajo`,maintenanceDue:`Mantenimiento pendiente`,maintenanceDueDescription:`Notificar cuando se necesite mantenimiento`},smartPlug:{title:`Enchufes inteligentes`,add:`Añadir enchufe inteligente`,edit:`Editar enchufe inteligente`,name:`Nombre`,ipAddress:`Dirección IP`,linkedPrinter:`Impresora vinculada`,autoOn:`Encendido automático`,autoOnDescription:`Encender cuando comienza la impresión`,autoOff:`Apagado automático`,autoOffDescription:`Apagar tras completar la impresión`,offDelay:`Retardo de apagado`,offDelayMinutes:`Minutos tras la impresión`,offDelayTemp:`Cuando la boquilla está por debajo de la temperatura`,currentState:`Estado actual`,turnOn:`Encender`,turnOff:`Apagar`},filamentTracking:`Seguimiento del filamento`,filamentTrackingDesc:`Elija cómo realizar el seguimiento de sus bobinas de filamento. Puede usar el inventario integrado o conectar un servidor Spoolman externo.`,autoAddUnknownRfid:`Añadir automáticamente bobinas RFID desconocidas`,autoAddUnknownRfidDesc:`Crea automáticamente una entrada de inventario cuando se detecta una bobina con una etiqueta RFID desconocida. Desactive si registra manualmente las nuevas bobinas con antelación para evitar duplicados.`,filamentChecks:`Comprobaciones de filamento`,disableFilamentWarnings:`Desactivar las advertencias de filamento`,disableFilamentWarningsDesc:`No mostrar advertencias sobre filamento insuficiente al imprimir o encolar`,preferLowestFilament:`Preferir el filamento con menos restante`,preferLowestFilamentDesc:`Cuando varias bobinas coincidan, usar la que tenga menos filamento restante`,preferLowestFilamentBackupNote:`Solo surte efecto cuando AMS Filament Backup está activado en la impresora — de lo contrario, la impresora no puede cambiar a una segunda bobina cuando la elegida se acabe.`,trackingModeBuiltIn:`Inventario integrado`,trackingModeBuiltInDesc:`Incluye coincidencia automática por RFID y seguimiento del uso`,trackingModeSpoolmanDesc:`Servidor externo de gestión de filamento`,builtInFeatureRfid:`Detecta automáticamente las bobinas RFID de Bambu Lab en el AMS`,builtInFeatureUsage:`Realiza el seguimiento del consumo de filamento por impresión`,builtInFeatureCatalog:`Gestione bobinas, colores y perfiles de factor K`,builtInFeatureThirdParty:`Las bobinas de terceros se pueden asignar a bobinas del inventario`,amsSyncButton:`Sincronizar pesos desde el AMS`,amsSyncTitle:`Sincronizar los pesos de las bobinas desde el AMS`,amsSyncMessage:`Esto sobrescribirá todos los pesos de las bobinas del inventario con los valores actuales de % restante del AMS de las impresoras conectadas. Use esto para recuperarse de datos de peso dañados. Las impresoras deben estar en línea.`,amsSyncing:`Sincronizando...`,amsSyncSuccess:`{{synced}} bobina(s) sincronizada(s), {{skipped}} omitida(s)`,amsSyncError:`Error al sincronizar los pesos desde el AMS`,spoolmanAmsSyncButton:`Sincronizar pesos de Spoolman desde el AMS`,spoolmanAmsSyncTitle:`Sincronizar los pesos de las bobinas de Spoolman desde el AMS`,spoolmanAmsSyncMessage:`Esto actualizará todos los pesos de las bobinas de Spoolman según los valores actuales de % restante del AMS de las impresoras conectadas. Las impresoras deben estar en línea.`,spoolmanAmsSyncing:`Sincronizando...`,spoolmanAmsSyncSuccess:`{{synced}} bobina(s) sincronizada(s), {{skipped}} omitida(s)`,spoolmanAmsSyncError:`Error al sincronizar los pesos de Spoolman desde el AMS`,spoolmanAmsSyncErrorUnreachable:`Error al sincronizar los pesos de Spoolman (Spoolman inaccesible)`,spoolmanAmsSyncErrorNotConfigured:`Error al sincronizar los pesos de Spoolman (Spoolman no configurado)`,spoolmanNotConfigured:`Spoolman no configurado`,spoolmanFilamentCatalogTitle:`Catálogo de filamentos de Spoolman`,spoolmanFilamentCatalogDesc:`Nombres de filamentos y pesos de tara de su instancia de Spoolman. El nombre y el peso de la bobina se pueden editar aquí; el resto de las propiedades se gestionan directamente en Spoolman.`,spoolmanUrl:`URL de Spoolman`,spoolmanUrlHint:`URL de su servidor Spoolman (p. ej., http://localhost:7912)`,spoolmanConnected:`Conectado`,spoolmanDisconnected:`Desconectado`,status:`Estado`,connect:`Conectar`,disconnect:`Desconectar`,howSyncWorks:`Cómo funciona la sincronización`,syncInfoRfidOnly:`Solo se sincronizan las bobinas oficiales de Bambu Lab con RFID`,syncInfoAutoCreate:`Las bobinas nuevas se crean automáticamente en Spoolman en la primera sincronización`,syncInfoThirdPartySkipped:`Las bobinas que no son de Bambu Lab (de terceros, rellenadas) se omiten`,linkingExistingSpools:`Vincular bobinas existentes`,linkingExistingSpoolsDesc:`Para vincular bobinas existentes de Spoolman a su AMS, pase el cursor sobre una ranura del AMS y haga clic en "Vincular a Spoolman".`,syncMode:`Modo de sincronización`,syncModeAuto:`Automática`,syncModeManual:`Solo manual`,syncModeAutoDesc:`Los datos del AMS se sincronizan automáticamente cuando se detectan cambios`,syncModeManualDesc:`Sincronizar solo cuando se active manualmente`,syncAmsData:`Sincronizar datos del AMS`,syncAmsDataDesc:`Sincronizar manualmente los datos del AMS de la impresora con Spoolman`,allPrinters:`Todas las impresoras`,noDefaultPrinter:`Sin predeterminada (preguntar cada vez)`,sidebarOrder:`Orden de la barra lateral`,saveThumbnails:`Guardar miniaturas`,captureFinishPhoto:`Capturar foto de finalización`,noPrintersConfigured:`No hay impresoras configuradas`,archiveMode:{always:`Crear siempre una entrada de archivo`,never:`No crear nunca una entrada de archivo`,ask:`Preguntar cada vez`},checkForUpdatesLabel:`Buscar actualizaciones`,checkPrinterFirmware:`Comprobar el firmware de la impresora`,includeBetaUpdates:`Incluir versiones beta`,includeBetaUpdatesDesc:`Notificar sobre versiones beta y preliminares al buscar actualizaciones`,localLogin:{disable:`Deshabilitar el inicio de sesión local con usuario/contraseña`,disableHint:`Cuando se habilita, solo los proveedores SSO pueden iniciar sesión. LDAP no se ve afectado. Defina BAMBUDDY_LOCAL_LOGIN=true en el servidor para mantener una vía de recuperación.`},enableRetry:`Activar reintentos`,homeAssistantDescription:`Controlar enchufes inteligentes mediante Home Assistant`,environmentManagedLabel:`(Gestionado por el entorno)`,autoEnabledViaEnv:`Activado automáticamente mediante variables de entorno`,urlFromEnvReadOnly:`Valor establecido por la variable de entorno HA_URL (solo lectura)`,tokenFromEnvReadOnly:`Valor establecido por la variable de entorno HA_TOKEN (solo lectura)`,mqttConnectedTo:`Conectado a`,prometheusDescription:`Exponer los datos de la impresora en formato Prometheus`,noSmartPlugsTitle:`No hay enchufes inteligentes configurados`,noSmartPlugsDescription:`Añada un enchufe inteligente basado en Tasmota para realizar el seguimiento del consumo de energía y automatizar el control de la alimentación.`,noProvidersTitle:`No hay proveedores configurados`,noProvidersDescription:`Añada un proveedor para recibir alertas.`,noTemplatesAvailable:`No hay plantillas disponibles. Reinicie el backend para cargar las plantillas predeterminadas.`,apiPermissionView:`Ver el estado de la impresora y la cola`,apiPermissionEdit:`Añadir y quitar elementos de la cola de impresión`,apiKeysEmptyTitle:`No hay claves API`,apiKeysEmptyDescription:`Cree una clave API para integrarse con servicios externos.`,noUsersFound:`No se encontraron usuarios`,noGroupsFound:`No se encontraron grupos`,noGroupsAvailable:`No hay grupos disponibles`,passwordsDoNotMatch:`Las contraseñas no coinciden`,systemGroupWarning:`Los nombres de los grupos del sistema no se pueden cambiar`,authDisabledTitle:`La autenticación está desactivada`,authDisabledFeature1:`Exigir inicio de sesión para acceder al sistema`,authDisabledFeature2:`Crear varios usuarios con permisos basados en grupos`,authDisabledFeature3:`Controlar el acceso con más de 50 permisos granulares`,userHasCreated:`Este usuario ha creado:`,userItemsQuestion:`¿Qué desea hacer con estos elementos?`,deleteUserConfirm:`¿Está seguro de que desea eliminar este usuario?`,actionCannotBeUndone:`Esta acción no se puede deshacer.`,addFirstSmartPlug:`Añada su primer enchufe inteligente`,providers:`Proveedores`,log:`Registro`,testAll:`Probar todo`,testResults:`Resultados de la prueba`,testPassedCount:`{{count}} superadas`,testFailedCount:`{{count}} fallidas`,messageTemplates:`Plantillas de mensajes`,messageTemplatesDescription:`Personalice los mensajes de notificación para cada evento.`,apiKeys:`Claves API`,apiKeysDescription:`Cree claves API para integraciones externas y webhooks.`,createKey:`Crear clave`,apiKeyCreated:`Clave API creada correctamente`,apiKeyCopyWarning:`¡Copie esta clave ahora; no se volverá a mostrar!`,useInApiBrowser:`Usar en el explorador de API`,apiKeyQrButton:`Código QR`,apiKeyQrTitle:`Escanea para configurar`,apiKeyQrCaption:`Escanea con tu app móvil para añadir este servidor y la clave API.`,apiKeyQrWarning:`Contiene tu clave API secreta: no la compartas ni hagas capturas donde otros puedan verla.`,createNewApiKey:`Crear nueva clave API`,keyName:`Nombre de la clave`,keyNamePlaceholder:`p. ej., Home Assistant, OctoPrint`,readStatus:`Leer estado`,readStatusDescription:`Ver el estado de la impresora, la cola, la biblioteca, los archivos de impresión y las pipelines del cortador`,manageQueue:`Gestionar la cola`,manageQueueDescription:`Añadir y quitar elementos de la cola de impresión. Junto con "Gestionar biblioteca", ejecutar pipelines del cortador`,controlPrinter:`Controlar la impresora`,controlPrinterDescription:`Pausar, reanudar y detener impresiones`,manageLibrary:`Gestionar biblioteca`,manageLibraryDescription:`Subir, renombrar, eliminar y cortar archivos de la biblioteca; importar modelos desde MakerWorld. Junto con "Gestionar la cola", ejecutar pipelines del cortador`,manageInventory:`Gestionar inventario`,manageInventoryDescription:`Crear, actualizar y eliminar bobinas y registros de inventario. Necesario para los quioscos SpoolBuddy (escaneo NFC, lecturas de balanza, comandos del sistema del quiosco).`,manageMaintenance:`Gestionar mantenimiento`,manageMaintenanceDescription:`Registrar mantenimientos completados, restablecer contadores, editar intervalos y gestionar el catálogo de tipos de mantenimiento. Ideal para automatizaciones de Home Assistant que registran "limpié la boquilla" sin conceder un control más amplio de la impresora.`,manageArchives:`Gestionar archivos de impresión`,manageArchivesDescription:`Editar y eliminar archivos de impresión, incluida la eliminación de impresiones antiguas y de su contribución a las estadísticas. Ideal para automatizaciones que depuran el historial de impresión.`,manageProjects:`Gestionar proyectos`,manageProjectsDescription:`Crear, actualizar y eliminar proyectos, y añadirles archivos de impresión. Ideal para automatizaciones que organizan las impresiones en proyectos.`,maintenanceBadge:`Mantenimiento`,archivesBadge:`Archivos`,projectsBadge:`Proyectos`,libraryBadge:`Biblioteca`,inventoryBadge:`Inventario`,cloudAccess:`Permitir el acceso a la nube`,cloudAccessDescription:`Leer los preajustes y filamentos de Bambu Cloud en su nombre. Requiere que haya iniciado sesión en Bambu Cloud.`,cloudBadge:`Nube`,updateEnergyCost:`Actualizar el precio de la electricidad`,updateEnergyCostDescription:`Permite que esta clave envíe por POST un nuevo precio de electricidad por kWh a /settings/electricity-price. Útil para las automatizaciones de tarifa dinámica de Home Assistant (Tibber, Octopus, etc.). Este es el único campo de ajustes que se puede escribir mediante una clave API.`,energyCostBadge:`Energía`,legacyKey:`Heredada`,legacyKeyTooltip:`Creada antes de la propiedad por usuario; vuelva a crearla para usar el acceso a la nube`,unnamedKey:`Clave sin nombre`,lastUsed:`Usada por última vez`,read:`Lectura`,control:`Control`,createFirstKey:`Cree su primera clave`,webhookEndpoints:`Puntos de conexión de webhook`,webhookApiKeyHint:`Use su clave API en la cabecera X-API-Key.`,webhook:{getAllStatus:`Obtener el estado de todas las impresoras`,getSpecificStatus:`Obtener el estado de una impresora concreta`,addToQueue:`Añadir a la cola de impresión`,pausePrint:`Pausar impresión`,resumePrint:`Reanudar impresión`,stopPrint:`Detener impresión`},apiBrowser:`Explorador de API`,apiBrowserDescription:`Explore y pruebe todos los puntos de conexión de API disponibles.`,apiKeyForTesting:`Clave API para pruebas`,apiKeyPlaceholder:`Pegue aquí su clave API para probar los puntos de conexión autenticados...`,apiKeyHint:`Esta clave se enviará como cabecera X-API-Key en las solicitudes.`,deleteApiKeyTitle:`Eliminar clave API`,deleteApiKeyMessage:`¿Está seguro de que desea eliminar esta clave API? Cualquier integración que use esta clave dejará de funcionar.`,deleteKey:`Eliminar clave`,amsDisplayThresholds:`Umbrales de visualización del AMS`,amsThresholdsDescription:`Configure los umbrales de color para los indicadores de humedad y temperatura del AMS.`,humidity:`Humedad`,goodGreen:`Buena (verde)`,fairOrange:`Aceptable (naranja)`,aboveFairBad:`Por encima del umbral aceptable se muestra en rojo (mala)`,fairAlsoDryingThreshold:`Este umbral también se usa para activar el secado automático cuando está habilitado`,fairBelowDryingFloor:`El secado automático no puede alcanzar este valor: un AMS indica {{floor}} % o más mientras calienta, por lo que cada ciclo terminaría y se reiniciaría al instante. Súbelo por encima del {{floor}} % si usas el secado automático.`,temperature:`Temperatura`,goodBlue:`Buena (azul)`,aboveFairHot:`Por encima del umbral aceptable se muestra en rojo (caliente)`,tempAlarmThreshold:`Alarma por encima de`,tempAlarmSeparateFromBand:`Solo el umbral de alarma envía notificaciones: Bueno y Aceptable únicamente colorean la pantalla. Déjalo vacío para alarmar en el umbral aceptable, como antes.`,tempAlarmMustBePositive:`Un umbral de 0 o inferior se ignora: la alarma usa el umbral aceptable.`,historyRetention:`Retención del historial`,keepSensorHistory:`Conservar el historial del sensor durante`,historyRetentionDescription:`Los datos de humedad y temperatura más antiguos se eliminarán automáticamente`,defaultPrintOptions:`Opciones de impresión predeterminadas`,defaultPrintOptionsDescription:`Establezca valores predeterminados para las opciones de impresión al iniciar nuevas impresiones. Se pueden anular por impresión en el diálogo de impresión.`,defaultBedLevelling:`Nivelación de la cama`,defaultBedLevellingDesc:`Nivelar automáticamente la cama antes de imprimir`,defaultFlowCali:`Calibración del flujo`,defaultFlowCaliDesc:`Calibrar el flujo de extrusión`,defaultVibrationCali:`Calibración de vibración`,defaultVibrationCaliDesc:`Reducir los artefactos de resonancia`,defaultLayerInspect:`Inspección de la primera capa`,defaultLayerInspectDesc:`Inspección de la primera capa por IA`,defaultTimelapse:`Time-lapse`,defaultTimelapseDesc:`Grabar vídeo time-lapse`,defaultNozzleOffsetCali:`Calibración del offset de boquillas`,defaultNozzleOffsetCaliDesc:`Calibrar los desplazamientos entre boquillas`,tempFanPresetsTitle:`Predefinidos de temperatura y ventilador`,tempFanPresetsDescription:`Personalice los valores de selección rápida en las ventanas emergentes de temperatura y velocidad del ventilador de la tarjeta de impresora. El botón Apagar siempre se muestra.`,tempFanPresetsNozzle:`Temperatura de la boquilla`,tempFanPresetsBed:`Temperatura de la cama`,tempFanPresetsChamber:`Temperatura de la cámara`,tempFanPresetsFan:`Velocidad del ventilador`,tempFanPresetsReset:`Restablecer valores predeterminados`,concurrentUploadsTitle:`Subidas simultáneas`,concurrentUploadsDescription:`Cuántas impresoras pueden recibir archivos de la cola al mismo tiempo. Las impresoras reciben los archivos lentamente (una impresión grande puede tardar varios minutos) y cada una espera su turno, así que en una granja grande subir este valor evita que la última impresora de un lote tenga que esperar a que terminen todas las transferencias anteriores. Bájalo si tu red o el host de Bambuddy tienen problemas con transferencias en paralelo.`,concurrentUploadsLabel:`Impresoras atendidas a la vez`,concurrentUploadsHelp:`1 envía a una impresora cada vez (el comportamiento anterior). El valor predeterminado es 4.`,staggeredStart:`Inicio escalonado`,staggeredStartDescription:`Tamaño de grupo e intervalo predeterminados al escalonar los inicios de lotes en varias impresoras. Se pueden anular por lote en la ventana de impresión.`,preheatTitle:`Precalentamiento y Heat Soak`,preheatDescription:`Calienta la cama (y la cámara, si es compatible) y mantiene la temperatura antes de iniciar cada impresión en cola. Útil para filamentos técnicos (PA, ABS) en impresoras sin calentador activo de cámara — la cama calienta la cámara por radiación mientras corre el temporizador de soak. La temperatura objetivo de la cama se lee del archivo de impresión; el comportamiento de la cámara depende del modelo de impresora.`,preheatEnabled:`Activar precalentamiento y soak`,preheatEnabledDesc:`Si está desactivado, las impresiones en cola se inician de inmediato. Cada elemento puede anular por impresión.`,preheatFilamentTargetsLabel:`Objetivo de cámara por filamento (°C)`,preheatFilamentTargetsHint:`Bambuddy elige el objetivo más alto entre los slots AMS cargados. Una impresión cuyos slots derivan todos 0 (PLA, PETG, TPU, PVA) omite el precalentamiento por completo y empieza de inmediato.`,preheatFilamentTargetsReset:`Restablecer valores predeterminados`,preheatFilamentTargetsDefaultRow:`Otros / sin asignar`,preheatMaxWait:`Espera máx. (segundos)`,preheatMaxWaitHelp:`Tope de la fase de calentamiento de cámara antes de pasar al soak.`,preheatSoak:`Soak (segundos)`,preheatSoakHelp:`Tiempo de retención tras alcanzar el objetivo o caducar la espera máx.`,preheatHardwareTitle:`Comportamiento por impresora:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E calientan activamente la cámara vía M141. X1C/P2S leen la temperatura pero solo calientan la cámara por radiación de la cama. P1S/P1P/A1/A1 Mini no tienen sensor de cámara — solo aplica el temporizador de soak.`,preheatPerItemDesc:`Calienta la cama y la cámara antes de iniciar esta impresión. Por defecto usa el interruptor global de Ajustes → Workflow.`,preheatOverride_inherit:`Heredar`,preheatOverride_on:`Activado`,preheatOverride_off:`Desactivado`,calibrationMode_off:`Desactivado`,calibrationMode_on:`Activado`,calibrationMode_auto:`Automático`,preheatTargetOverride:`Sobrescribir objetivo de cámara (°C, vacío = por filamento)`,preheatTargetOverrideHelp:`0 calienta la cama y ejecuta el reposo sin cámara. Si se deja en blanco, una impresión sin necesidad de cámara omite el precalentamiento por completo.`,plateClear:`Confirmación de cama despejada`,requirePlateClear:`Requerir confirmación de cama despejada`,requirePlateClearDescription:`Cuando está activado, el planificador espera la confirmación de cama despejada por impresora antes de iniciar impresiones en cola en impresoras con trabajos finalizados. Desactivar esto también oculta la insignia de estado de la cama y el botón "Marcar cama como despejada" en las tarjetas de impresora.`,keepBedWarm:`Mantener la cama caliente entre impresiones`,keepBedWarmDesc:`Mientras se espera la confirmación de limpieza de placa, mantiene la cama a la temperatura de mantenimiento indicada abajo para que la cámara siga caliente — o a la temperatura de cama de la siguiente impresión si es mayor. Solo aplica cuando la siguiente impresión requiere calefacción de cámara (ASA, ABS, PA, PC, etc.). Requiere la confirmación de limpieza de placa activada.`,keepWarmBedTemp:`Temperatura de la cama en mantenimiento (°C)`,keepWarmBedTempHelp:`Se usa siempre que la cama sirve para calentar la cámara: durante el mantenimiento en caliente y en el precalentado cuando el archivo no incluye temperatura de cama. Una temperatura mayor del archivo siempre tiene prioridad.`,keepWarmMaxMinutes:`Dejar de mantener caliente tras (minutos)`,keepWarmMaxMinutesHelp:`Si la placa no se limpia dentro de este tiempo, los calentadores se apagan en lugar de mantenerse encendidos indefinidamente.`,gcodeInjection:`Inyección de G-code`,gcodeInjectionDescription:`Configure G-code personalizado para inyectar al inicio o al final de las impresiones para sistemas de impresión automática como Farmloop, SwapMod, AutoClear y Printflow 3D. Los fragmentos se configuran por modelo de impresora y se aplican cuando se activa "Inyectar G-code" en un elemento de la cola.`,gcodeInjectionNoPrinters:`No se encontraron impresoras. Añada impresoras para configurar fragmentos de G-code.`,gcodeStartLabel:`G-code de inicio`,gcodeEndLabel:`G-code de fin`,gcodeStartPlaceholder:`G-code añadido antes de que comience la impresión...`,gcodeEndPlaceholder:`G-code añadido después de que termine la impresión...`,staggerGroupSize:`Tamaño de grupo`,staggerGroupSizeHelp:`Impresoras que se inician simultáneamente por grupo`,staggerInterval:`Intervalo (minutos)`,staggerIntervalHelp:`Retardo entre el inicio de cada grupo`,queueDrying:`Secado automático de la cola`,queueDryingDescription:`Secar automáticamente el filamento del AMS cuando la impresora está inactiva entre impresiones en cola. Usa el umbral de humedad de arriba para activar el secado.`,queueDryingEnabled:`Activar el secado automático`,queueDryingEnabledDescription:`Iniciar el secado del AMS automáticamente cuando la impresora está inactiva y la humedad supera el umbral`,queueDryingBlock:`Esperar a que termine el secado`,queueDryingBlockDescription:`Bloquear la cola de impresión hasta que termine el secado. Cuando está desactivado, las impresiones tienen prioridad sobre el secado.`,ambientDryingEnabled:`Secado ambiental`,ambientDryingEnabledDescription:`Secar automáticamente el filamento en impresoras inactivas cuando la humedad supera el umbral, incluso sin impresiones en cola.`,printDryingEnabled:`Continuar secado durante la impresión`,printDryingEnabledDescription:`Permite que el secado automático siga funcionando durante una impresión en hardware compatible (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L con firmware reciente). La temperatura de secado se limita automáticamente 5°C por debajo del preajuste en reposo para proteger las bobinas.`,dryingPresets:`Preajustes de secado`,dryingPresetsDescription:`Temperatura y duración por tipo de filamento. El AMS 2 Pro usa temperaturas más bajas; el AMS-HT admite temperaturas más altas.`,dryingFilament:`Filamento`,humidityThresholds:`Umbrales de humedad`,humidityThresholdsDescription:`Disparador de humedad por tipo de filamento para autosecado y alarmas. Cargas mixtas en un AMS usan el umbral más bajo.`,humidityThresholdCol:`Umbral`,humidityThresholdDefault:`Predeterminado (tipos desconocidos)`,printModal:`Ventana de impresión`,expandCustomMapping:`Expandir el mapeo personalizado de forma predeterminada`,expandCustomMappingDescription:`Al imprimir en varias impresoras, mostrar el mapeo de AMS por impresora expandido`,authentication:`Autenticación`,authEnabledDescription:`Su instancia está protegida con autenticación de usuario`,authDisabledDescription:`Active para exigir el inicio de sesión y gestionar el acceso de los usuarios`,authDisabledMessage:`Active la autenticación para crear cuentas de usuario, gestionar permisos y proteger su instancia de Bambuddy.`,enableAuthentication:`Activar la autenticación`,currentUser:`Usuario actual`,changePassword:`Cambiar contraseña`,admin:`Administrador`,users:`Usuarios`,addUser:`Añadir usuario`,groups:`Grupos`,addGroup:`Añadir grupo`,system:`Sistema`,noDescription:`Sin descripción`,userCount:`{{count}} usuarios`,permissionCount:`{{count}} permisos`,createUser:`Crear usuario`,username:`Nombre de usuario`,enterUsername:`Introduzca el nombre de usuario`,password:`Contraseña`,enterPassword:`Introduzca la contraseña`,passwordRequirements:`Al menos 8 caracteres, con una mayúscula, una minúscula, un dígito y un carácter especial.`,confirmPassword:`Confirmar contraseña`,confirmPasswordPlaceholder:`Confirme la contraseña`,viewReleaseOnGitHub:`Ver la versión en GitHub`,turnAllPlugsOn:`Encender todos los enchufes`,turnAllPlugsOff:`Apagar todos los enchufes`,clearNotificationLogs:`Borrar los registros de notificaciones`,clearLogsMessage:`Esto eliminará permanentemente todos los registros de notificaciones de más de 30 días. Esta acción no se puede deshacer.`,clearLogs:`Borrar registros`,resetUiPreferences:`Restablecer las preferencias de la interfaz`,resetUiPreferencesMessage:`Esto restablecerá todas las preferencias de la interfaz a sus valores predeterminados: orden de la barra lateral, tema, disposición del panel, modos de vista y preferencias de ordenación. Sus impresoras, archivos y ajustes del servidor NO se verán afectados. La página se recargará tras el restablecimiento.`,resetPreferences:`Restablecer preferencias`,deleteGroupTitle:`Eliminar grupo`,deleteGroupMessage:`¿Está seguro de que desea eliminar este grupo? Los usuarios de este grupo perderán estos permisos.`,deleteGroup:`Eliminar grupo`,disableAuthenticationTitle:`Desactivar la autenticación`,disableAuthenticationMessage:`¿Está seguro de que desea desactivar la autenticación? Esto hará que su instancia de Bambuddy sea accesible sin iniciar sesión. Todos los usuarios permanecerán en la base de datos, pero la autenticación se desactivará.`,disableAuthentication:`Desactivar la autenticación`,configureBambuddy:`Configurar Bambuddy`,systemDefault:`Predeterminado del sistema`,archiveSettings:`Ajustes de archivado`,newWindow:`Ventana nueva`,embeddedOverlay:`Superposición integrada`,preferredSlicer:`Laminador preferido`,preferredSlicerDescription:`Laminador usado para el corte en la aplicación a través del sidecar de la API`,openInSlicerLabel:`Abrir en el laminador`,openInSlicerInherit:`Igual que el laminador de la API`,openInSlicerDescription:`Laminador de escritorio que usa el botón «Abrir en el laminador». Déjelo en «Igual que el laminador de la API» para heredar, o elija un laminador distinto para uso local.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev tienen errores conocidos de la CLI que impiden laminar muchos 3MF creados con Bambu — consulte las incidencias del proyecto original #12426 (cierre inesperado en archivos multiextrusor pintados) y #13386 (rechazo por validación estricta del rango de parámetros). Se recomienda Bambu Studio hasta que lleguen las correcciones.`,useSlicerApi:`Usar la API del laminador`,useSlicerApiDescription:`Cuando está activado, las acciones de «Laminar» abren la ventana del laminador integrada en la aplicación y llaman al contenedor auxiliar de la API del laminador. Cuando está desactivado (predeterminado), delegan en el laminador de escritorio mediante un esquema de URI.`,slicerCard:`Laminador`,orcaslicerApiUrl:`OrcaSlicer sidecar URL`,bambuStudioApiUrl:`Bambu Studio sidecar URL`,slicerStallTimeout:`Tiempo de espera por inactividad del laminador (minutos)`,slicerStallTimeoutDescription:`Abandona un laminado tras este tiempo sin progreso del sidecar. Los modelos pesados que siguen informando progreso nunca se interrumpen, por mucho que tarden. Los sidecars que no informan progreso usan este valor como limite de tiempo total.`,slicerApiUrlDescription:`URL del contenedor auxiliar de la API del laminador. Déjelo en blanco para usar los valores predeterminados de las variables de entorno SLICER_API_URL / BAMBU_STUDIO_API_URL.`,externalCameras:`Cámaras externas`,costTracking:`Seguimiento de costes`,billingEnabled:`Activar facturación`,billingEnabledDescription:`Cobrar las impresiones a los usuarios y activar las funciones financieras`,printerKillSwitch:`Parada de impresiones no autorizadas`,printerKillSwitchDescription:`Detiene inmediatamente las impresiones que comiencen sin autorización.`,financeBudgetReset:`Reinicio mensual del presupuesto financiero`,financeBudgetResetDay:`Día de reinicio`,financeBudgetResetDayHelp:`En los meses cortos, se usa el último día del mes.`,financeBudgetResetTimezone:`Zona horaria del reinicio`,financeBudgetResetTimezoneHelp:`El inicio del período presupuestario se calcula en esta zona horaria.`,rebuildLedger:`Reconstruir libro mayor del monedero`,rebuildLedgerStarted:`Se inició la reconstrucción del libro mayor`,rebuildLedgerConfirmTitle:`¿Reconstruir el libro mayor del monedero?`,rebuildLedgerConfirmMessage:`Esto reconstruirá el libro mayor para reparar saldos históricos. Ejecútalo solo si sabes lo que estás haciendo.`,rebuildLedgerInProgress:`Iniciando reconstrucción...`,printsOnly:`Solo impresiones`,totalConsumption:`Consumo total`,dataManagement:`Gestión de datos`,storageUsage:`Uso del almacenamiento`,storageUsageDescription:`Desglose del uso de datos por categoría`,storageUsageTotal:`Total`,storageUsageErrors:`Errores`,storageUsageOtherBreakdown:`Otros (incluye recursos estáticos, scripts y archivos de configuración)`,storageUsageSystem:`Sistema`,storageUsageData:`Datos`,storageUsageUnavailable:`Información de uso del almacenamiento no disponible`,clearNotificationLogsDescription:`Eliminar los registros de notificaciones de más de 30 días`,resetUiPreferencesDescription:`Restablecer el orden de la barra lateral, el tema, los modos de vista y las preferencias de disposición. Las impresoras, los archivos y los ajustes no se ven afectados.`,enableHomeAssistant:`Activar Home Assistant`,enableMqtt:`Activar MQTT`,useTls:`Usar TLS`,enableMetricsEndpoint:`Activar el punto de conexión de métricas`,availableMetrics:`Métricas disponibles`,editUser:`Editar usuario`,deleteUserTitle:`Eliminar usuario`,groupName:`Nombre del grupo`,leaveEmptyForAnonymous:`Dejar vacío para anónimo`,leaveEmptyForNoAuth:`Dejar vacío para sin autenticación`,enterNewPassword:`Introduzca la nueva contraseña`,confirmNewPassword:`Confirme la nueva contraseña`,enterGroupName:`Introduzca el nombre del grupo`,enterDescriptionOptional:`Introduzca una descripción (opcional)`,enterCurrentPassword:`Introduzca la contraseña actual`,enterNewPasswordMin6:`Introduzca la nueva contraseña (mín. 6 caracteres)`,toast:{keyCopied:`Clave copiada al portapapeles`,copyFailed:`Error al copiar la clave`,keyAddedToBrowser:`Clave añadida al explorador de API`,clearLogsFailed:`Error al borrar los registros`,uiPreferencesReset:`Preferencias de la interfaz restablecidas. Actualizando...`,authDisabled:`Autenticación desactivada correctamente`,authDisableFailed:`Error al desactivar la autenticación`,apiKeyCreated:`Clave API creada`,apiKeyDeleted:`Clave API eliminada`,userCreated:`Usuario creado correctamente`,userUpdated:`Usuario actualizado correctamente`,userDeleted:`Usuario eliminado correctamente`,groupCreated:`Grupo creado correctamente`,groupUpdated:`Grupo actualizado correctamente`,groupDeleted:`Grupo eliminado correctamente`,fillRequiredFields:`Rellene todos los campos obligatorios`,passwordsDoNotMatch:`Las contraseñas no coinciden`,passwordTooShort:`La contraseña debe tener al menos 8 caracteres`,passwordNeedsUppercase:`La contraseña debe contener al menos una letra mayúscula`,passwordNeedsLowercase:`La contraseña debe contener al menos una letra minúscula`,passwordNeedsDigit:`La contraseña debe contener al menos un dígito`,passwordNeedsSpecial:`La contraseña debe contener al menos un carácter especial`,enterGroupName:`Introduzca un nombre de grupo`,settingsSaved:`Ajustes guardados`,noPermissionUpdate:`No tiene permiso para cambiar los ajustes`,cameraSettingsSaved:`Ajustes de la cámara guardados`,enterCameraUrl:`Introduzca una URL de cámara`,passwordChanged:`Contraseña cambiada correctamente`,connectionFailed:`Error de conexión`,testFailed:`La prueba falló`,cameraConnected:`Cámara conectada{{resolution}}`,cameraConnectedCoalesced:`Cámara conectada{{resolution}} (compartida con una captura ya en curso)`},testConnection:`Probar conexión`,catalog:{spoolCatalog:`Catálogo de bobinas`,spoolCatalogDescription:`Pesos de bobinas vacías por marca/tipo. Se usa para la búsqueda automática de peso al añadir bobinas.`,searchCatalog:`Buscar en el catálogo...`,addNewEntry:`Añadir nueva entrada`,namePlaceholder:`Nombre (p. ej., Bambu Lab - Plástico)`,weight:`Peso`,type:`Tipo`,default:`Predeterminado`,custom:`Personalizado`,noMatch:`Ninguna entrada coincide con su búsqueda`,empty:`No hay entradas en el catálogo`,deleteEntry:`Eliminar entrada`,deleteConfirm:`¿Está seguro de que desea eliminar "{{name}}"?`,resetCatalog:`Restablecer catálogo`,resetConfirm:`¿Restablecer el catálogo a los valores predeterminados? Esto eliminará todas las entradas personalizadas.`,loadFailed:`Error al cargar el catálogo de bobinas`,nameWeightRequired:`El nombre y el peso son obligatorios`,entryAdded:`Entrada añadida`,addFailed:`Error al añadir la entrada`,entryUpdated:`Entrada actualizada`,updateFailed:`Error al actualizar la entrada`,entryDeleted:`Entrada eliminada`,deleteFailed:`Error al eliminar la entrada`,resetSuccess:`Catálogo restablecido a los valores predeterminados`,resetFailed:`Error al restablecer el catálogo`,exported:`Se exportaron {{count}} entradas`,imported:`Se importaron {{added}} entradas ({{skipped}} omitidas)`,importFailed:`Error al importar: formato JSON no válido`,exportTooltip:`Exportar el catálogo a JSON`,importTooltip:`Importar el catálogo desde JSON`,resetTooltip:`Restablecer a los valores predeterminados`,selectedCount:`{{count}} seleccionadas`,deleteSelected:`Eliminar seleccionadas`,bulkDeleteConfirm:`¿Está seguro de que desea eliminar {{count}} entradas?`,bulkDeleted:`Se eliminaron {{count}} entradas`,bulkDeleteFailed:`Error al eliminar las entradas`,material:`Material`,spoolWeight:`Peso de la bobina`,color:`Color`,updateSpoolWeight:`Actualizar el peso de la bobina`,filamentUpdated:`Filamento actualizado`,filamentUpdateFailed:`Error al actualizar el filamento`,filamentUpdateInvalid:`Datos de filamento no válidos`,keepExistingSpoolWeight:`Conservar el peso anterior para las bobinas existentes`,keepExistingSpoolWeightDesc:`Las bobinas ya creadas con este tipo de filamento conservan el peso de tara anterior. Las bobinas nuevas usan el valor actualizado.`,applyToAllSpools:`Aplicar a todas las bobinas`,applyToAllSpoolsDesc:`Todos los cálculos de peso para este tipo de filamento usan inmediatamente el nuevo peso de tara.`},colorCatalog:{title:`Catálogo de colores`,description:`Colores de filamento por fabricante/material. Se usa para la búsqueda automática de color al añadir bobinas.`,searchColors:`Buscar colores...`,allManufacturers:`Todos los fabricantes`,addNewColor:`Añadir nuevo color`,manufacturer:`Fabricante`,colorName:`Nombre del color`,hex:`Hex`,materialOptional:`Material (opcional)`,showing:`Mostrando {{filtered}} de {{total}} colores`,noMatch:`Ningún color coincide con su búsqueda`,empty:`No hay colores en el catálogo`,deleteColor:`Eliminar color`,deleteConfirm:`¿Está seguro de que desea eliminar "{{name}}"?`,resetCatalog:`Restablecer el catálogo de colores`,resetConfirm:`¿Restablecer el catálogo a los valores predeterminados? Esto eliminará todos los colores personalizados.`,sync:`Sincronizar`,starting:`Iniciando...`,syncTooltip:`Sincronizar desde FilamentColors.xyz (más de 2000 colores, puede tardar un minuto)`,loadFailed:`Error al cargar el catálogo de colores`,fieldsRequired:`El fabricante, el nombre del color y el color hexadecimal son obligatorios`,colorAdded:`Color añadido`,addFailed:`Error al añadir el color`,colorUpdated:`Color actualizado`,updateFailed:`Error al actualizar el color`,colorDeleted:`Color eliminado`,deleteFailed:`Error al eliminar el color`,resetSuccess:`Catálogo de colores restablecido a los valores predeterminados`,resetFailed:`Error al restablecer el catálogo`,syncUpToDate:`Ya está actualizado ({{count}} colores comprobados)`,syncComplete:`Se añadieron {{added}} colores nuevos ({{skipped}} ya existían)`,syncError:`Error de sincronización`,syncFailed:`Error al sincronizar desde FilamentColors.xyz`,exported:`Se exportaron {{count}} colores`,imported:`Se importaron {{added}} colores ({{skipped}} omitidos)`,importFailed:`Error al importar: formato JSON no válido`,selectedCount:`{{count}} seleccionados`,deleteSelected:`Eliminar seleccionados`,bulkDeleteConfirm:`¿Está seguro de que desea eliminar {{count}} colores?`,bulkDeleted:`Se eliminaron {{count}} colores`,bulkDeleteFailed:`Error al eliminar los colores`},dateFormat:`Formato de fecha`,dateFormatUs:`EE. UU. (MM/DD/AAAA)`,dateFormatEu:`UE (DD/MM/AAAA)`,dateFormatIso:`ISO (AAAA-MM-DD)`,timeFormat:`Formato de hora`,timeFormat12:`12 horas (3:30 PM)`,timeFormat24:`24 horas (15:30)`,defaultPrinter:`Impresora predeterminada`,defaultPrinterDescription:`Preseleccione esta impresora para subidas, reimpresiones y otras operaciones.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Use Diseño de la barra lateral para reordenar elementos, restablecer la visibilidad y gestionar enlaces personalizados.`,setDefault:`Establecer como predeterminado`,sidebarOrderSetDefaultHint:`Establecer como predeterminado aplica el orden de menú actual a los usuarios que no han personalizado el suyo.`,sidebarDefaultSet:`Se ha establecido el orden de menú predeterminado.`,sidebarDefaultCleared:`Orden de menú predeterminado borrado.`,sidebarDefaultFailed:`Error al establecer el orden de menú predeterminado.`,reset:`Restablecer`,darkMode:`Modo oscuro`,lightMode:`Modo claro`,active:`(activo)`,background:`Fondo`,accent:`Acento`,style:`Estilo`,bgNeutral:`Neutro`,bgWarm:`Cálido`,bgCool:`Frío`,bgOled:`Negro OLED`,bgSlate:`Azul pizarra`,bgForest:`Verde bosque`,accentGreen:`Verde`,accentTeal:`Verde azulado`,accentBlue:`Azul`,accentOrange:`Naranja`,accentPurple:`Morado`,accentRed:`Rojo`,styleClassic:`Clásico`,styleGlow:`Resplandor`,styleVibrant:`Vibrante`,themeToggleHint:`Alterne entre modo oscuro, claro y sistema con el icono en la barra lateral.`,progressInTitle:`Progreso en la pestaña`,progressInTitleDescription:`Muestra el porcentaje de la impresión activa y un anillo de progreso en la pestaña del navegador.`,autoArchivePrints:`Archivar impresiones automáticamente`,autoArchiveDescription:`Guardar automáticamente los archivos 3MF cuando se completan las impresiones`,saveThumbnailsDescription:`Extraer y guardar imágenes de vista previa de los archivos 3MF`,captureFinishPhotoDescription:`Tomar una foto desde la cámara de la impresora cuando se completa la impresión. Bambuddy graba un breve timelapse durante la impresión para que la foto pueda obtenerse del momento previo al descenso de la cama; el archivo del timelapse se conserva si activaste el timelapse para esta impresión, de lo contrario se elimina automáticamente tras capturar la foto.`,finishPhotoRestorePlate:`Elevar la cama para la foto final`,finishPhotoRestorePlateDescription:`La impresora baja la cama unos 100 mm al terminar una impresión, dejando la pieza terminada por debajo del encuadre de la cámara. Bambuddy la vuelve a subir hasta justo encima de la última capa impresa, toma la foto y luego la baja de nuevo. Se omite si se desconoce la altura de la impresión o si hay otro trabajo en cola.`,ffmpegNotInstalled:`ffmpeg no instalado`,ffmpegRequired:`La captura de cámara requiere ffmpeg. Instálelo mediante <brew>brew install ffmpeg</brew> (macOS) o <apt>apt install ffmpeg</apt> (Linux).`,camera:`Cámara`,cameraViewMode:`Modo de vista de la cámara`,cameraOverlayDescription:`La cámara se abre en una superposición redimensionable en la pantalla principal`,cameraWindowDescription:`La cámara se abre en una ventana de navegador independiente`,externalCamerasDescription:`Configure cámaras externas para sustituir la cámara integrada de la impresora. Admite transmisiones MJPEG, RTSP, capturas HTTP y cámaras USB (V4L2). Cuando está activada, la cámara externa se usa para la vista en directo y las fotos de finalización.`,cameraPlaceholderUsb:`Ruta del dispositivo (/dev/video0)`,cameraPlaceholderUrl:`URL de la cámara (rtsp://... o http://...)`,cameraTypeMjpeg:`Transmisión MJPEG`,cameraTypeRtsp:`Transmisión RTSP`,cameraTypeSnapshot:`Captura HTTP`,cameraTypeUsb:`Cámara USB (V4L2)`,cameraSnapshotUrl:`URL de captura (opcional)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`URL de fotograma único usada para las miniaturas de notificaciones, las fotos de finalización, los fotogramas de time-lapse por capa y la detección de cama. El time-lapse y la detección de cama requieren cada uno su propio interruptor por impresora; esta URL es solo la fuente de imagen de la que se nutren cuando están activos. Déjelo en blanco para capturar desde la transmisión en directo de arriba. Útil para go2rtc (/api/frame.jpeg) y cámaras IP con un punto de conexión de captura dedicado.`,cameraRotation:`Rotación`,test:`Probar`,connected:`Conectada`,disconnected:`Desconectada`,currency:`Moneda`,defaultFilamentCost:`Coste predeterminado del filamento (por kg)`,electricityCost:`Coste de la electricidad por kWh`,energyDisplayMode:`Modo de visualización de la energía`,energyModePrintDescription:`El panel muestra la suma de la energía usada durante las impresiones`,energyModeTotalDescription:`El panel muestra la energía total de los enchufes inteligentes`,fileManager:`Gestor de archivos`,createArchiveEntry:`Crear una entrada de archivo al imprimir`,createArchiveEntryDescription:`Al imprimir desde el gestor de archivos, crear opcionalmente una entrada de archivo`,lowDiskSpaceWarning:`Advertencia de poco espacio en disco`,lowDiskSpaceDescription:`Mostrar una advertencia cuando el espacio libre en disco caiga por debajo de este umbral`,printerFirmware:`Firmware de la impresora`,checkFirmwareDescription:`Buscar actualizaciones de firmware de la impresora de Bambu Lab`,bambuddySoftware:`Software de Bambuddy`,autoCheckDescription:`Buscar automáticamente nuevas versiones al iniciar`,checkNow:`Buscar ahora`,updateAvailableVersion:`Actualización disponible: v{{version}}`,releaseNotes:`Notas de la versión`,updateViaDocker:`Actualizar mediante Docker Compose:`,composeDirectory:`Directorio de Compose`,composeDirectoryHint:`Directorio que contiene tu docker-compose.yml. Déjalo vacío para omitir el cd.`,copyUpdateCommand:`Copiar comando de actualización`,updateViaHomeAssistant:`Las actualizaciones las gestiona el Supervisor de Home Assistant. Abra Ajustes → Complementos → Bambuddy en Home Assistant para instalar la nueva versión.`,updateViaWindowsInstaller:`Las instalaciones en Windows se actualizan volviendo a ejecutar el instalador. Descarga la nueva versión abajo — tus datos, ajustes e impresoras se conservan.`,downloadWindowsInstaller:`Descargar instalador para v{{version}}`,installUpdate:`Instalar actualización`,latestVersionRunning:`Está ejecutando la versión más reciente`,failedToCheckUpdates:`Error al buscar actualizaciones: {{error}}`,backupRestore:`Copia de seguridad y restauración`,backupRestoreDescription:`Exportar/importar ajustes y configurar la copia de seguridad en GitHub`,goToBackup:`Ir a la copia de seguridad`,externalUrl:`URL externa`,externalUrlDescription:`La URL externa donde Bambuddy es accesible. Se usa para las imágenes de notificación y las integraciones externas.`,bambuddyUrl:`URL de Bambuddy`,externalUrlHint:`Incluya el protocolo y el puerto (p. ej., http://192.168.1.100:8000)`,ftpRetry:`Reintento de FTP`,ftpRetryDescription:`Reintentar las operaciones FTP cuando el Wi-Fi de la impresora no es fiable. Se aplica a las descargas de 3MF, las subidas de impresión, las descargas de time-lapse y las actualizaciones de firmware.`,autoRetryDescription:`Reintentar automáticamente las operaciones FTP fallidas`,retryAttempts:`Intentos de reintento`,retryDelay:`Retardo de reintento`,connectionTimeout:`Tiempo de espera de la conexión`,time_one:`{{count}} vez`,time_other:`{{count}} veces`,second_one:`{{count}} segundo`,second_other:`{{count}} segundos`,nSeconds:`{{count}} segundos`,increaseForWeakWifi:`Aumente para impresoras con Wi-Fi débil`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Conéctese a Home Assistant para controlar enchufes inteligentes mediante la API REST de HA. Admite las entidades switch, light, input_boolean y script.`,homeAssistantUrl:`URL de Home Assistant`,longLivedAccessToken:`Token de acceso de larga duración`,haTokenHint:`Cree un token en HA: Perfil → Tokens de acceso de larga duración → Crear token`,connectionSuccessful:`Conexión correcta`,connectionFailed:`Error de conexión`,haConnectionSuccess:`Conexión con Home Assistant realizada correctamente.`,haConnectionFailed:`Error al conectar con Home Assistant.`,mqttPublishing:`Publicación MQTT`,mqttDescription:`Publique los eventos de Bambuddy en un broker MQTT externo para la integración con Node-RED, Home Assistant y otros sistemas de automatización.`,mqttEnableDescription:`Publicar eventos en un broker MQTT externo`,brokerHostname:`Nombre de host del broker`,port:`Puerto`,usernameOptional:`Nombre de usuario (opcional)`,passwordOptional:`Contraseña (opcional)`,topicPrefix:`Prefijo del tema`,topicPrefixHint:`Los temas serán: {{prefix}}/printers/<serial>/status, etc.`,prometheusMetrics:`Métricas de Prometheus`,prometheusEndpointDescription:`Exponer las métricas de la impresora en <code>/api/v1/metrics</code> para la supervisión con Prometheus/Grafana.`,bearerTokenOptional:`Bearer Token (opcional)`,bearerTokenHint:`Si se establece, las solicitudes deben incluir <code>Authorization: Bearer <token></code>`,metricsConnectionStatus:`Estado de la conexión`,metricsPrinterState:`Estado de la impresora (inactiva/imprimiendo/etc.)`,metricsPrintProgress:`Progreso de la impresión 0-100%`,metricsBedTemp:`Temperatura de la cama`,metricsNozzleTemp:`Temperatura de la boquilla`,metricsPrintsTotal:`Total de impresiones por resultado`,metricsMore:`...y más (capas, ventiladores, cola, uso de filamento)`,smartPlugsDescription:`Conecte enchufes inteligentes (Tasmota o Home Assistant) para automatizar el control de la alimentación y realizar el seguimiento del consumo de energía de sus impresoras.`,allOn:`Encender todo`,allOff:`Apagar todo`,addSmartPlug:`Añadir enchufe inteligente`,energySummary:`Resumen de energía`,currentPower:`Potencia actual`,plugsOnline:`{{reachable}}/{{total}} enchufes en línea`,today:`Hoy`,yesterday:`Ayer`,total:`Total`,enablePlugsForSummary:`Active enchufes para ver el resumen de energía`,addNotificationProvider:`Añadir`,systemBadge:`(Sistema)`,creating:`Creando...`,changing:`Cambiando...`,deleteUserAndItems:`Eliminar el usuario Y sus elementos`,deleteUserKeepItems:`Eliminar el usuario, conservar los elementos (quedan sin propietario)`,ok:`Aceptar`,twoFa:{totpTitle:`Aplicación de autenticación (TOTP)`,totpDesc:`Use una aplicación de autenticación como Google Authenticator, Aegis o Authy.`,emailOtpTitle:`OTP por correo`,emailOtpDesc:`Enviar un código de un solo uso a {{email}} cuando inicie sesión.`,emailOtpNoEmail:`Añada una dirección de correo a su cuenta para habilitar este método.`,addEmailFirst:`Su cuenta no tiene dirección de correo. Pida a un administrador que añada una antes de activar el OTP por correo.`,setupTotp:`Configurar la aplicación de autenticación`,setupAuthApp:`Configurar la aplicación de autenticación`,setupInstructions:`Escanee el código QR de abajo con su aplicación de autenticación y luego confirme con un código.`,manualEntry:`¿No puede escanear? Introduzca este secreto manualmente:`,scannedContinue:`He escaneado el código — continuar`,enterCodeToConfirm:`Introduzca el código de 6 dígitos de su aplicación de autenticación para confirmar la configuración.`,activate:`Activar`,disableTotp:`Desactivar el autenticador`,disableConfirmHint:`Introduzca un código TOTP válido o un código de respaldo para desactivar el autenticador.`,totpDisabled:`Aplicación de autenticación desactivada.`,emailOtpEnabled:`OTP por correo activado.`,emailOtpDisabled:`OTP por correo desactivado.`,smtpRequired:`Configure y pruebe primero los ajustes de SMTP.`,invalidCode:`Código no válido. Inténtelo de nuevo.`,enableEmailOtp:`Activar el OTP por correo`,disableEmailOtp:`Desactivar el OTP por correo`,emailSetupEnterCode:`Se ha enviado un código de verificación a su dirección de correo. Introdúzcalo a continuación para confirmar que es el propietario de este buzón.`,verifyAndEnable:`Verificar y activar`,emailDisablePasswordHint:`Introduzca la contraseña de su cuenta para confirmar la desactivación del OTP por correo.`,passwordPlaceholder:`Introduzca su contraseña`,backupCodesTitle:`Guarde sus códigos de respaldo`,backupCodesWarning:`Guarde estos códigos en un lugar seguro. Cada código solo se puede usar una vez y no se volverán a mostrar.`,backupCodesRemaining:`Quedan {{count}} códigos de respaldo`,savedCodes:`He guardado mis códigos`,regenBackup:`Regenerar los códigos de respaldo`,regenBackupHint:`Introduzca su código TOTP actual para generar 10 códigos de respaldo nuevos. Todos los códigos de respaldo existentes quedarán invalidados.`,newBackupCodes:`Nuevos códigos de respaldo`,linkedAccounts:`Cuentas de SSO vinculadas`,linkedAccountsDesc:`Estos proveedores de identidad externos están vinculados a su cuenta.`,oidcUnlinked:`Cuenta desvinculada.`},sessionPolicy:{title:`Política de sesión`,description:`Duración máxima de sesión para nuevos inicios de sesión. Los tokens ya emitidos conservan su caducidad original.`,preset24h:`24 horas`,preset7d:`7 días`,preset30d:`30 días`,customHoursLabel:`Duración de sesión personalizada en horas`,hoursSuffix:`horas`,warning:`Las sesiones más largas reducen la protección de cierre automático. Recomendado solo para implementaciones de usuario único en entornos de confianza.`},oidc:{title:`Proveedores SSO / OIDC`,desc:`Configure proveedores de OpenID Connect para permitir el inicio de sesión único mediante proveedores de identidad externos.`,addProvider:`Añadir proveedor`,newProvider:`Nuevo proveedor`,empty:`Aún no hay proveedores OIDC configurados.`,created:`Proveedor creado.`,updated:`Proveedor actualizado.`,deleted:`Proveedor eliminado.`,refreshIcon:`Actualizar icono`,removeIcon:`Quitar icono`,iconRefreshed:`Icono actualizado.`,iconRemoved:`Icono eliminado.`,iconFetchFailed:`No se pudo obtener el icono de la URL del proveedor.`,deleteTitle:`Eliminar proveedor`,deleteMessage:`¿Eliminar "{{name}}"? Todas las cuentas de usuario vinculadas se desconectarán.`,form:{name:`Nombre visible`,issuerUrl:`URL del emisor`,clientId:`ID de cliente`,clientSecret:`Secreto de cliente`,scopes:`Ámbitos`,iconUrl:`URL del icono (opcional)`,enabled:`Activado`,autoCreate:`Crear usuarios automáticamente`,autoCreateDesc:`Crear automáticamente una cuenta local en el primer inicio de sesión.`,autoLink:`Vincular cuentas existentes automáticamente`,autoLinkDesc:`Vincular cuentas locales existentes haciendo coincidir el correo en el primer inicio de sesión.`,secretHint:`dejar en blanco para conservar el actual`,secretPlaceholder:`nuevo secreto`,emailClaim:`Claim de correo`,emailClaimDesc:`Claim de JWT usado como identidad de correo. Use «preferred_username» o «upn» para Azure Entra ID (que no envía email_verified). Use solo nombres de claim de confianza.`,emailClaimPlaceholder:`correo`,emailClaimCustomClaimAutoLinkWarning:`Los claims personalizados solo son seguros para la vinculación automática cuando el valor lo administra el inquilino (p. ej. upn / preferred_username de Azure Entra ID). No active la vinculación automática si su IdP permite a los usuarios autoasignarse este claim.`,requireEmailVerified:`Requerir correo verificado`,requireEmailVerifiedDesc:`Aceptar el claim de correo solo cuando el proveedor lo marca como verificado.`,requireEmailVerifiedWarning:`Advertencia: el correo se aceptará incluso sin verificación. Úselo solo con proveedores de confianza.`,requireEmailVerifiedAutoLink:`Desactive primero la vinculación automática para cambiar este ajuste.`,defaultGroup:`Grupo predeterminado`,defaultGroupDesc:`Grupo asignado a los usuarios creados automáticamente. Si no se establece, se usa Visores como alternativa.`,defaultGroupViewersFallback:`Visores (predeterminado)`,autologin:`Inicio automático`,autologinDesc:`Redirigir a los visitantes no autenticados directamente a este proveedor. Solo un proveedor puede llevar esta marca.`}},encryption:{title:`Estado del cifrado de MFA`,enabledFromEnv:`Cifrado en reposo activado (clave de la variable de entorno MFA_ENCRYPTION_KEY)`,enabledFromFile:`Cifrado en reposo activado (clave cargada del directorio de datos)`,enabledGenerated:`Cifrado en reposo activado con una clave autogenerada`,notConfigured:`Cifrado en reposo no configurado`,notConfiguredDesc:`Los secretos TOTP y los client_secrets de OIDC se almacenan en texto plano. Establezca MFA_ENCRYPTION_KEY o reinicie Bambuddy con un directorio de datos con permisos de escritura para generar una automáticamente.`,allEncrypted:`Todos los secretos de MFA están cifrados en reposo.`,legacyRowsLabel:`Filas heredadas en texto plano`,encryptedRowsLabel:`Filas cifradas`,legacyRowsWarning:`Se detectaron {{count}} fila(s) heredada(s) en texto plano. Vuelva a guardar el proveedor OIDC o vuelva a registrar la aplicación de autenticación del usuario para migrar al almacenamiento cifrado.`,backupHint:`La clave autogenerada se almacena en DATA_DIR/.mfa_encryption_key y se incluye en los ZIP de copia de seguridad local. Mantenga sus copias de seguridad seguras o establezca MFA_ENCRYPTION_KEY de forma explícita.`,decryptionBrokenTitle:`Falta la clave de cifrado`,decryptionBrokenError:`{{count}} registro(s) cifrado(s) no se pueden descifrar porque la clave de cifrado ya no está disponible. Restaure la MFA_ENCRYPTION_KEY anterior o DATA_DIR/.mfa_encryption_key para recuperarlos.`,migrationErrorWarning:`{{count}} fila(s) heredada(s) no se pudieron volver a cifrar al iniciar. Revise los registros del servidor y reinicie Bambuddy para reintentarlo.`},pipelineLimits:{title:`Límites de pipelines del cortador`,maxCopiesLabel:`Copias máximas por ejecución`,maxCopiesDesc:`Límite superior de copias que los operadores pueden solicitar al ejecutar una pipeline. El límite máximo del servidor es 1000.`},pipelines:{title:`Pipelines del Cortador`,subtitle:`Paquetes reutilizables de preajustes (impresora + proceso + filamentos + tipo de placa). Guarda uno desde el diálogo Cortar y aplícalo con un clic al siguiente archivo.`,loading:`Cargando pipelines…`,loadError:`No se pudieron cargar las pipelines.`,confirmDelete:`¿Eliminar esta pipeline? Esto no se puede deshacer.`,staleWarning:`Uno o más preajustes referenciados ya no existen. Vuelve a guardar esta pipeline desde el diálogo Cortar para corregirla.`,empty:{title:`Aún no hay pipelines.`,howto:`Abre el diálogo Cortar para cualquier archivo, elige impresora / proceso / filamentos / placa, y haz clic en "Guardar como pipeline". Tus pipelines guardadas aparecerán aquí.`},field:{name:`Nombre de la pipeline`,description:`Descripción`,targetPrinter:`Impresora de destino`,noTarget:`— Sin destino —`,targetKind:`Tipo de destino`,targetKindSpecific:`Impresora específica`,targetKindClass:`Clase de impresora`,targetModelClass:`Modelo de impresora`,fanoutStrategy:`Estrategia de distribución`,fanout:{max_parallel:`Máximo paralelo — distribuir entre cualquier impresora libre coincidente`,round_robin:`Round robin — alternar entre impresoras elegibles`,fill_one_first:`Llenar una primero — fijar todas las copias a una impresora`},fanoutShort:{max_parallel:`paralelo`,round_robin:`round robin`,fill_one_first:`primero uno`}},action:{save:`Guardar`,cancel:`Cancelar`,rename:`Renombrar`,delete:`Eliminar`},slot:{printer:`Impresora`,process:`Proceso`,filament:`Filamento`,filamentN:`Filamento {{n}}`,filamentAll:`Todos los {{n}} slots`,bed:`Placa`},group:{profiles:`Perfiles`,filaments:`Filamentos`},searchPlaceholder:`Buscar pipelines…`,filterTargetType:`Filtrar por tipo de destino`,filterTarget:`Filtrar por destino`,filter:{all:`Todos los destinos`,noTarget:`Sin destino`,count:`{{shown}} / {{total}}`,noMatches:`Ninguna pipeline coincide con los filtros actuales.`},toast:{saved:`Pipeline guardada`,saveFailed:`Error al guardar`,deleted:`Pipeline eliminada`,deleteFailed:`Error al eliminar`},noTargetHint:`Establece una impresora de destino para ejecutar`,noTargetWarning:`Establece una impresora de destino antes de ejecutar esta pipeline.`,runs:{lastRun:`Última ejecución`,status:{queued:`en cola`,slicing:`cortando`,dispatching:`enviando`,in_progress:`imprimiendo`,completed:`completada`,failed:`fallida`,partial_failure:`fallo parcial`,cancelled:`cancelada`}}}},notification:{printStarted:{title:`Impresión iniciada`,body:`{{printer}}: {{filename}} ha empezado a imprimirse`},printCompleted:{title:`Impresión completada`,body:`{{printer}}: {{filename}} se completó correctamente`},printFailed:{title:`Impresión fallida`,body:`{{printer}}: {{filename}} ha fallado`},printStopped:{title:`Impresión detenida`,body:`{{printer}}: {{filename}} se detuvo`},printProgress:{title:`Progreso de la impresión`,body:`{{printer}}: {{filename}} está al {{percent}}%`},printerOffline:{title:`Impresora desconectada`,body:`{{printer}} está desconectada`},printerError:{title:`Error de la impresora`,body:`{{printer}}: {{error}}`},filamentLow:{title:`Filamento bajo`,body:`{{printer}}: el filamento se está agotando`},maintenanceDue:{title:`Mantenimiento pendiente`,body:`{{printer}}: {{items}} necesitan atención`}},errors:{generic:`Algo salió mal`,networkError:`Error de red. Compruebe su conexión.`,notFound:`No encontrado`,unauthorized:`No autorizado`,serverError:`Error del servidor`,validationError:`Compruebe los datos introducidos`,printerConnectionFailed:`Error al conectar con la impresora`,saveFailed:`Error al guardar los cambios`,deleteFailed:`Error al eliminar`,loadFailed:`Error al cargar los datos`},hmsErrors:{title:`Errores - {{name}}`,noErrors:`No hay errores`,viewOnWiki:`Ver en la wiki de Bambu Lab`,mqttVerifyFailedRemedy:`Activa el modo desarrollador en la impresora, reinicia la impresora y vuelve a iniciar el trabajo.`,unknownCode:`Código HMS desconocido — consulta la wiki de Bambu Lab para más detalles.`,clearInstructions:`Borre los errores en la impresora para descartarlos aquí.`,clearErrors:`Borrar errores`,clearSuccess:`Errores HMS borrados`,clearFailed:`Error al borrar los errores HMS`,actionSuccess:`Acción enviada a la impresora`,actionFailed:`No se pudo enviar la acción`,runoutExpectedSlot:`El filamento se agotó en {{ranOut}}. La impresora ahora espera filamento compatible en {{expected}}. Inserta una bobina en {{expected}} y luego selecciona Reintentar.`,runoutExpectedSlotOnly:`La impresora está esperando filamento compatible en {{expected}}. Inserta una bobina ahí y luego selecciona Reintentar.`,runoutSlotUnknown:`El filamento se agotó y la impresión está en pausa. Bambuddy no pudo determinar qué slot espera ahora la impresora — revisa la pantalla de la impresora para ver el slot solicitado.`,actions:{RESUME_PRINTING:`Reanudar impresión`,RESUME_PRINTING_DEFECTS:`Reanudar (defectos aceptables)`,RESUME_PRINTING_PROBELM_SOLVED:`Reanudar (problema resuelto)`,STOP_PRINTING:`Detener impresión`,CHECK_ASSISTANT:`Ver asistente`,FILAMENT_EXTRUDED:`Filamento extruido, continuar`,RETRY_FILAMENT_EXTRUDED:`Aún no extruido, reintentar`,CONTINUE:`Finalizado, continuar`,LOAD_VIRTUAL_TRAY:`Cargar filamento`,OK_BUTTON:`OK`,FILAMENT_LOAD_RESUME:`Filamento cargado, reanudar`,JUMP_TO_LIVEVIEW:`Ver en vivo`,NO_REMINDER_NEXT_TIME:`No recordar la próxima vez`,REFRESH_NOZZLE:`Volver a comprobar`,IGNORE_NO_REMINDER_NEXT_TIME:`Ignorar y no recordar`,IGNORE_RESUME:`Ignorar y reanudar`,PROBLEM_SOLVED_RESUME:`Problema resuelto, reanudar`,TURN_OFF_FIRE_ALARM:`Entendido, apagar alarma de incendio`,RETRY_PROBLEM_SOLVED:`Reintentar (problema resuelto)`,CANCLE:`Cancelar`,STOP_DRYING:`Detener secado`,PROCEED:`Continuar`,OK_JUMP_RACK:`OK`,ABORT:`Cancelar`,DISABLE_PURIFICATION:`Desactivar purificación para esta impresión`,DONT_REMIND_NEXT_TIME:`No recordarme`,DBL_CHECK_CANCEL:`Cancelar`,DBL_CHECK_DONE:`Hecho`,DBL_CHECK_RETRY:`Reintentar`,DBL_CHECK_RESUME:`Reanudar`,DBL_CHECK_OK:`Confirmar`,REMOVE_CLOSE_BTN:`Cerrar`}},mqttDebug:{title:`Registro de depuración MQTT`,searchPlaceholder:`Buscar tema o carga útil...`,noMessages:`Aún no se han registrado mensajes`,startLoggingHint:`Haga clic en «Iniciar registro» para empezar a capturar mensajes MQTT`,noMessagesMatch:`Ningún mensaje coincide con su filtro`,adjustFilterHint:`Pruebe a ajustar su búsqueda o los criterios del filtro`,incoming:`Entrante`,outgoing:`Saliente`,loggingStopped:`Registro detenido`,loggingActive:`Registro activo - los mensajes se actualizarán automáticamente`,startLogging:`Iniciar registro`,stopLogging:`Detener registro`,clearLog:`Borrar registro`,topic:`Tema`,timestamp:`Marca de tiempo`,direction:`Dirección`,all:`Todos`},printerFiles:{zipStarted_one:`Se inició la descarga ZIP de {{count}} archivo`,zipStarted_other:`Se inició la descarga ZIP de {{count}} archivos`,zipPartial:`La descarga ZIP comenzó con {{successful}} de {{total}} archivos; no se pudieron recuperar los demás`,downloadFailed:`Error de descarga: {{error}}`,unknownError:`Error desconocido`,shiftSelectHint:`Mayús-clic para seleccionar un intervalo`,selectFile:`Seleccionar {{name}}`,deselectFile:`Deseleccionar {{name}}`,title:`Gestor de archivos`,storageUsed:`Usado:`,storageFree:`Libre:`,filterPlaceholder:`Filtrar archivos...`,deleteButton:`Eliminar`,deleteFiles:`Eliminar {{count}} archivos`,deleteFileConfirm:`¿Eliminar "{{name}}"? Esto no se puede deshacer.`,deleteFilesConfirm:`¿Eliminar {{count}} archivos seleccionados? Esto no se puede deshacer.`,noFiles:`No hay archivos en la impresora`,printerUnavailable:`El servicio de archivos de la impresora no está disponible. Inténtelo de nuevo cuando la impresora esté accesible.`,loadingFiles:`Cargando archivos...`,failedToLoad:`Error al cargar los archivos`,toast:{filesDeleted:`Se eliminaron {{count}} archivo(s)`,deleteFailed:`Error al eliminar: {{error}}`}},confirm:{delete:`¿Está seguro de que desea eliminar esto?`,unsavedChanges:`Tiene cambios sin guardar. ¿Está seguro de que desea salir?`,clearQueue:`¿Está seguro de que desea vaciar la cola?`},login:{title:`Inicio de sesión en Bambuddy`,subtitle:`Inicie sesión en su cuenta`,username:`Nombre de usuario`,usernamePlaceholder:`Introduzca su nombre de usuario`,usernameOrEmail:`Nombre de usuario o correo`,usernameOrEmailPlaceholder:`Nombre de usuario o @ correo`,password:`Contraseña`,passwordPlaceholder:`Introduzca su contraseña`,signIn:`Iniciar sesión`,signingIn:`Iniciando sesión...`,rememberMe:`Recordarme`,forgotPassword:`¿Olvidó su contraseña?`,autologinFailed:`El inicio de sesión SSO automático falló. Elija un proveedor abajo para continuar.`,localDisabledNotice:`El inicio de sesión local está deshabilitado. Use uno de los proveedores SSO de abajo.`,loginSuccess:`Sesión iniciada correctamente`,loginFailed:`Error al iniciar sesión`,enterCredentials:`Introduzca el nombre de usuario y la contraseña`,enterEmail:`Introduzca su dirección de correo`,oidcLoginFailed:`Error en el inicio de sesión con OIDC`,oidcErrors:{providerError:`El proveedor de identidad devolvió un error`,missingParameters:`A la respuesta de OIDC le faltan parámetros obligatorios`,invalidState:`El estado de OIDC no es válido o ya se ha usado`,stateExpired:`La sesión de inicio de sesión con OIDC ha caducado — inténtelo de nuevo`,providerNotFound:`Proveedor OIDC no encontrado`,discoveryFailed:`Error al obtener el documento de descubrimiento de OIDC`,invalidDiscovery:`El documento de descubrimiento de OIDC no es válido`,networkError:`Error de red durante el intercambio de tokens de OIDC`,badResponse:`Respuesta inesperada durante el intercambio de tokens de OIDC`,noIdToken:`El proveedor OIDC no devolvió un token de ID`,validationFailed:`Error en la validación del token de OIDC`,nonceMismatch:`Discrepancia de nonce de OIDC — posible ataque de repetición`,missingSubClaim:`Al token de OIDC le falta el claim sub`,noLinkedAccount:`Ninguna cuenta local está vinculada a esta identidad de OIDC`,accountInactive:`Su cuenta está inactiva`,userResolutionFailed:`Error al resolver su cuenta`,internalError:`Se produjo un error interno durante el inicio de sesión con OIDC`,tokenExchangeFailed:`Error en el intercambio de tokens de OIDC`},forgotPasswordTitle:`Contraseña olvidada`,forgotPasswordMessage:`Si ha olvidado su contraseña, póngase en contacto con el administrador de su sistema para restablecerla.`,forgotPasswordEmailMessage:`Introduzca su dirección de correo y le enviaremos una contraseña nueva.`,emailAddress:`Dirección de correo`,emailPlaceholder:`su.correo@ejemplo.com`,cancel:`Cancelar`,sending:`Enviando...`,sendResetEmail:`Enviar correo de restablecimiento`,howToReset:`Cómo restablecer su contraseña:`,resetStep1:`Póngase en contacto con su administrador de Bambuddy`,resetStep2:`Pídale que restablezca su contraseña en la gestión de usuarios`,resetStep3:`Puede establecerle una nueva contraseña temporal`,resetStep4:`Inicie sesión con la nueva contraseña y cámbiela en Ajustes`,gotIt:`Entendido`,resetPassword:{title:`Establecer nueva contraseña`,subtitle:`Introduzca y confirme su nueva contraseña a continuación.`,newPassword:`Nueva contraseña`,newPasswordPlaceholder:`Al menos 8 caracteres`,confirmPassword:`Confirmar contraseña`,confirmPasswordPlaceholder:`Repita la nueva contraseña`,saving:`Guardando…`,submit:`Establecer nueva contraseña`,backToLogin:`Volver al inicio de sesión`,passwordsDoNotMatch:`Las contraseñas no coinciden`,passwordTooShort:`La contraseña debe tener al menos 8 caracteres`,resetFailed:`Error al restablecer la contraseña. Es posible que el enlace haya caducado.`},twoFA:{title:`Autenticación de dos factores`,subtitle:`Su cuenta está protegida con 2FA. Introduzca el código de verificación a continuación.`,methodAuthenticator:`Aplicación de autenticación`,methodEmail:`Código por correo`,methodBackup:`Código de respaldo`,instructionsTotp:`Abra su aplicación de autenticación e introduzca el código de 6 dígitos para Bambuddy.`,instructionsEmail:`Se ha enviado un código de 6 dígitos a su dirección de correo. Caduca en 10 minutos.`,instructionsEmailNotSent:`Haga clic en el botón de abajo para recibir un código de verificación por correo.`,instructionsBackup:`Introduzca uno de sus códigos de recuperación de respaldo de 8 caracteres. Cada código solo se puede usar una vez.`,sendCodeButton:`Enviar código por correo`,sendingCode:`Enviando...`,resendCode:`Reenviar código`,codeLabel:`Código de verificación`,backupCodeLabel:`Código de respaldo`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Verificar`,verifyingButton:`Verificando...`,backToLogin:`← Volver al inicio de sesión`,orContinueWith:`o continuar con`,signInWith:`Iniciar sesión con {{provider}}`,enterCode:`Introduzca el código de verificación`,sendCodeFailed:`Error al enviar el código de verificación`,invalidCode:`Código no válido. Inténtelo de nuevo.`}},setup:{title:`Configuración de Bambuddy`,subtitle:`Configure la autenticación para su instancia de Bambuddy`,enableAuth:`Activar la autenticación`,adminAccount:`Cuenta de administrador`,adminAccountDesc:`Si ya existen usuarios administradores, la autenticación se activará usando las cuentas de administrador existentes. Deje los campos de abajo vacíos para usar los administradores existentes, o introduzca nuevas credenciales para crear un nuevo usuario administrador.`,adminUsername:`Nombre de usuario del administrador`,adminPassword:`Contraseña del administrador`,optionalIfAdminExists:`(opcional si existen usuarios administradores)`,adminUsernamePlaceholder:`Introduzca el nombre de usuario del administrador (opcional)`,adminPasswordPlaceholder:`Introduzca la contraseña del administrador (opcional)`,confirmPassword:`Confirmar contraseña`,confirmPasswordPlaceholder:`Confirme la contraseña del administrador`,settingUp:`Configurando...`,completeSetup:`Completar la configuración`,toast:{authEnabledAdminCreated:`Autenticación activada y usuario administrador creado`,authEnabledExistingAdmins:`Autenticación activada usando los usuarios administradores existentes`,setupCompleted:`Configuración completada`,enterBothCredentials:`Introduzca el nombre de usuario y la contraseña del administrador, o deje ambos vacíos para usar los usuarios administradores existentes`,passwordsDoNotMatch:`Las contraseñas no coinciden`,passwordTooShort:`La contraseña debe tener al menos 6 caracteres`}},changePassword:{title:`Cambiar contraseña`,currentPassword:`Contraseña actual`,currentPasswordPlaceholder:`Introduzca la contraseña actual`,newPassword:`Nueva contraseña`,newPasswordPlaceholder:`Introduzca la nueva contraseña (mín. 6 caracteres)`,confirmPassword:`Confirmar nueva contraseña`,confirmPasswordPlaceholder:`Confirme la nueva contraseña`,passwordsDoNotMatch:`Las contraseñas no coinciden`,passwordTooShort:`La contraseña debe tener al menos 6 caracteres`,changing:`Cambiando...`,success:`Contraseña cambiada correctamente`,failed:`Error al cambiar la contraseña`},plateAlert:{title:`¡Impresión en pausa!`,message:`Se han detectado objetos en la cama de impresión. La impresión se ha pausado automáticamente. Despeje la cama y reanude la impresión.`,understand:`Entendido`},camera:{title:`Vista de la cámara`,invalidPrinterId:`ID de impresora no válido`,live:`En directo`,snapshot:`Captura`,restartStream:`Reiniciar la transmisión`,refreshSnapshot:`Actualizar la captura`,fullscreen:`Pantalla completa`,exitFullscreen:`Salir de la pantalla completa`,connectingToCamera:`Conectando con la cámara...`,capturingSnapshot:`Capturando imagen...`,connectionLost:`Conexión perdida`,connectionFailed:`Error de conexión con la cámara`,reconnecting:`Reconectando en {{countdown}} s... (intento {{attempt}}/{{max}})`,reconnectNow:`Reconectar ahora`,cameraUnavailable:`Cámara no disponible`,cameraUnavailableDesc:`Asegúrese de que la impresora está encendida y conectada.`,noCamera:`No hay cámara disponible`,retry:`Reintentar`,cameraStream:`Transmisión de la cámara`,zoomOut:`Alejar`,zoomIn:`Acercar`,resetZoom:`Restablecer el zoom`,recording:`Grabando`,startRecording:`Iniciar grabación`,stopRecording:`Detener grabación`,chamberLight:`Conmutar la luz de la cámara`,unavailable:`Cámara no disponible`,diagnose:{button:`Diagnosticar`,modalTitle:`Diagnóstico de la cámara`,running:`Ejecutando el diagnóstico...`,runFailed:`No se pudo ejecutar el diagnóstico: {{error}}`,retry:`Ejecutar de nuevo`,stage:{tcp_reachable:`Accesibilidad de la red`,first_frame:`Captura de fotogramas`,live_stream_active:`Transmisión en directo activa`},summary:{all_ok:`La cámara funciona. El diagnóstico completó todas las etapas correctamente.`,live_stream_active_healthy:`La cámara está transmitiendo actualmente con fotogramas recientes — no se necesita ninguna prueba.`,printer_unreachable:`La impresora no es accesible. Compruebe la dirección IP, la conexión de red y que la impresora está encendida.`,camera_port_closed:`La impresora es accesible pero el puerto de la cámara está cerrado. Asegúrese de que el modo solo LAN y el modo desarrollador están activados en los ajustes de la impresora.`,no_frame:`Se conectó a la cámara pero no se recibieron fotogramas. Inténtelo de nuevo o compruebe que la cámara está activada en los ajustes de la impresora.`,unknown_failure:`El diagnóstico de la cámara falló por un motivo desconocido. Consulte el registro de soporte para más detalles.`},meta:{protocol:`Protocolo`,port:`Puerto`,profile:`Perfil`}}},groups:{title:`Gestión de grupos`,subtitle:`Gestione los grupos de permisos para el control de acceso`,backToSettings:`Volver a Ajustes`,createGroup:`Crear grupo`,noPermission:`No tiene permiso para acceder a esta página.`,system:`Sistema`,noDescription:`Sin descripción`,usersCount:`{{count}} usuarios`,permissionsCount:`{{count}} permisos`,edit:`Editar`,delete:`Eliminar`,toast:{created:`Grupo creado correctamente`,updated:`Grupo actualizado correctamente`,deleted:`Grupo eliminado correctamente`,enterGroupName:`Introduzca un nombre de grupo`},modal:{editGroup:`Editar grupo`,createGroup:`Crear grupo`,cancel:`Cancelar`,saving:`Guardando...`,creating:`Creando...`,saveChanges:`Guardar cambios`},form:{groupName:`Nombre del grupo`,groupNamePlaceholder:`Introduzca el nombre del grupo`,systemGroupWarning:`Los nombres de los grupos del sistema no se pueden cambiar`,description:`Descripción`,descriptionPlaceholder:`Introduzca una descripción (opcional)`,permissions:`Permisos ({{count}} seleccionados)`},deleteModal:{title:`Eliminar grupo`,message:`¿Está seguro de que desea eliminar este grupo? Los usuarios de este grupo perderán estos permisos.`,confirm:`Eliminar grupo`},editor:{title:`Editar grupo`,createTitle:`Crear grupo`,search:`Buscar permisos...`,selectAll:`Seleccionar todo`,clearAll:`Borrar todo`,permissionsSelected:`{{count}} seleccionados`,noResults:`Ningún permiso coincide con su búsqueda`,websocketHint:`Necesario para las actualizaciones en vivo. Sin este permiso, la interfaz recurre al sondeo periódico.`}},users:{title:`Gestión de usuarios`,subtitle:`Gestione los usuarios y su acceso a su instancia de Bambuddy`,backToSettings:`Volver a Ajustes`,createUser:`Crear usuario`,noPermission:`No tiene permiso para acceder a esta página.`,admin:`Administrador`,noGroups:`Sin grupos`,active:`Activo`,inactive:`Inactivo`,edit:`Editar`,delete:`Eliminar`,system:`Sistema`,noGroupsAvailable:`No hay grupos disponibles`,table:{username:`Nombre de usuario`,groups:`Grupos`,status:`Estado`,actions:`Acciones`},toast:{created:`Usuario creado correctamente`,updated:`Usuario actualizado correctamente`,deleted:`Usuario eliminado correctamente`,fillRequired:`Rellene todos los campos obligatorios`,passwordsDoNotMatch:`Las contraseñas no coinciden`,passwordTooShort:`La contraseña debe tener al menos 6 caracteres`,ldapProvisioned:`Usuario LDAP "{{username}}" aprovisionado`},modal:{createUser:`Crear usuario`,editUser:`Editar usuario`,cancel:`Cancelar`,creating:`Creando...`,saving:`Guardando...`,saveChanges:`Guardar cambios`,advancedAuthSubtitle:`con autenticación avanzada`,tabsAriaLabel:`Origen del usuario`,localTab:`Local`,ldapTab:`LDAP`,ldapSearchLabel:`Buscar en el directorio`,ldapSearchPlaceholder:`Escriba un nombre de usuario, nombre o correo...`,ldapMinChars:`Escriba al menos 2 caracteres para buscar`,ldapTypeToSearch:`Empiece a escribir para buscar en el directorio LDAP`,ldapSearching:`Buscando en el directorio...`,ldapNoResults:`No hay usuarios coincidentes en el directorio`,ldapSearchError:`Error en la búsqueda en el directorio. Compruebe el estado del servidor LDAP.`,ldapAlreadyProvisioned:`Ya aprovisionado`,ldapSelectedLabel:`Seleccionado`,ldapProvision:`Aprovisionar usuario`,ldapProvisioning:`Aprovisionando...`,ldapErrorProvision:`Error en el aprovisionamiento. Compruebe el estado del servidor LDAP e inténtelo de nuevo.`},form:{username:`Nombre de usuario`,usernamePlaceholder:`Introduzca el nombre de usuario`,email:`Correo`,emailPlaceholder:`usuario@ejemplo.com`,password:`Contraseña`,passwordPlaceholder:`Introduzca la contraseña`,confirmPassword:`Confirmar contraseña`,confirmPasswordPlaceholder:`Confirme la contraseña`,newPasswordPlaceholder:`Introduzca la nueva contraseña`,confirmNewPasswordPlaceholder:`Confirme la nueva contraseña`,leaveBlankToKeep:`dejar en blanco para conservar la actual`,groups:`Grupos`,optional:`opcional`,autoGeneratedPassword:`Se generará automáticamente una contraseña segura y se enviará al usuario por correo.`,passwordManagedByAdvancedAuth:`La contraseña la gestiona la autenticación avanzada. Use «Restablecer contraseña» para enviar una nueva contraseña al usuario por correo.`,resetPassword:`Restablecer contraseña`,resettingPassword:`Restableciendo la contraseña...`},deleteModal:{title:`Eliminar usuario`,message:`¿Está seguro de que desea eliminar este usuario? Esta acción no se puede deshacer.`,confirm:`Eliminar usuario`}},streamOverlay:{title:`Superposición de transmisión`,invalidPrinterId:`ID de impresora no válido`,cameraStream:`Transmisión de la cámara`,progress:`Progreso`,eta:`Tiempo estimado`,printerIdle:`La impresora está inactiva`,printerOffline:`Impresora desconectada`,builder:{title:`Superposición de emisión`,description:`Crea la URL de una superposición de emisión: una vista de cámara a pantalla completa con los datos de impresión en directo encima, para OBS, una pantalla de pared o cualquier fuente de navegador. Elige los campos y copia la URL.`,printer:`Impresora`,size:`Tamaño del texto`,sizeSmall:`Pequeño`,sizeMedium:`Mediano`,sizeLarge:`Grande`,fps:`Fotogramas por segundo`,fpsHint:`Las cámaras A1 y P1 no pasan de unos 5 fps, sea cual sea el valor solicitado.`,token:`Token de superposición (opcional)`,tokenHint:`Solo hace falta si el inicio de sesión está activado: OBS no tiene sesión propia. Crea uno arriba con el ámbito Superposición de emisión.`,tokenWarning:`Esta URL contiene un token: cualquiera que pueda leerla verá la emisión y el nombre del archivo. Revoca el token para cortar el acceso.`,fields:`Campos que mostrar`,fieldPrinter:`Nombre de la impresora`,fieldFilename:`Nombre del archivo`,fieldStatus:`Estado`,fieldProgress:`Barra de progreso`,fieldLayers:`Número de capas`,fieldEta:`Tiempo restante y hora de fin`,fieldCamera:`Imagen de la cámara`,chamberHint:`La temperatura de la cámara de impresión solo aparece en modelos con sensor real: las P1 y A1 informan un valor sin sentido, así que se omite.`,urlTitle:`URL de la superposición`,open:`Abrir`,showPreview:`Mostrar vista previa`,hidePreview:`Ocultar vista previa`,previewTitle:`Vista previa de la superposición`},status:{printing:`Imprimiendo`,paused:`En pausa`,finished:`Finalizada`,failed:`Fallida`,idle:`Inactiva`,unknown:`Desconocido`}},profiles:{title:`Perfiles`,subtitle:`Gestione sus preajustes del laminador y las calibraciones de avance de presión`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Perfiles locales`,kprofiles:`Perfiles K`},orcaCloud:{connectedAs:`Conectado como`,connectedShort:`Conectado a Orca Cloud`,logout:`Desconectar`,noLogoutPermission:`No tienes permiso para desconectar`,noConnectPermission:`No tienes permiso para conectar a Orca Cloud`,retry:`Reintentar`,connectButton:`Conectar Orca Cloud`,connect:{title:`Conectar a Orca Cloud`,description:`Inicia sesión en tu cuenta Orca Cloud para sincronizar tus perfiles de slicer en Bambuddy.`},device:{title:`Aprueba Bambuddy en Orca Cloud`,instruction:`Abre Orca Cloud y aprueba este código. Bambuddy se conecta automáticamente en cuanto lo apruebes.`,codeLabel:`Tu código de emparejamiento`,openButton:`Abrir la página de aprobación de Orca Cloud`,manualHint:`O ve a {{url}} e introduce el código de arriba.`,waiting:`Esperando a que apruebes…`,cancel:`Cancelar`},profiles:{title:`Tus perfiles de Orca Cloud ({{count}})`,refresh:`Actualizar`,empty:`Aún no hay perfiles en tu cuenta de Orca Cloud.`},toast:{disconnected:`Desconectado de Orca Cloud`},errors:{startFailed:`No se pudo iniciar el inicio de sesión de Orca Cloud.`,denied:`El emparejamiento fue rechazado en Orca Cloud.`,expired:`El código de emparejamiento caducó. Haz clic en Conectar para intentarlo de nuevo.`,pollFailed:`Se perdió la conexión mientras se esperaba la aprobación. Inténtalo de nuevo.`}},localProfiles:{title:`Perfiles locales`,subtitle:`Importe y gestione preajustes del laminador desde OrcaSlicer`,import:`Importar perfiles`,importDesc:`Suelte aquí archivos .bbscfg, .bbsflmt, .orca_filament, .zip o .json`,importing:`Importando...`,search:`Buscar preajustes locales...`,noPresets:`Aún no hay preajustes locales`,noSearchResults:`Ningún preajuste coincide con su búsqueda`,badge:`Local`,edit:`Editar`,delete:`Eliminar`,cancel:`Cancelar`,deleteConfirmTitle:`Eliminar preajuste`,deleteConfirm:`¿Está seguro de que desea eliminar este preajuste? Esto no se puede deshacer.`,source:`Origen`,inheritsFrom:`Hereda de`,filamentType:`Tipo`,vendor:`Proveedor`,compatiblePrinters:`Impresoras`,nozzleTemp:`Temp. de la boquilla`,cost:`Coste`,density:`Densidad`,pressureAdvance:`Avance de presión`,filament:`Filamento`,process:`Proceso`,printer:`Impresora`,toast:{importSuccess:`{{count}} preajuste(s) importado(s)`,importSkipped:`{{count}} preajuste(s) omitido(s) (duplicados)`,importError:`{{count}} error(es) durante la importación`,deleted:`Preajuste eliminado`,updated:`Preajuste actualizado`}},connectedAs:`Conectado como`,signInExpiredTitle:`La sesión de Bambu Cloud ha caducado`,signInExpiredBody:`Bambu Lab ya no acepta el token almacenado. Inicie sesión de nuevo para restaurar los perfiles en la nube, las importaciones de MakerWorld y las comprobaciones de firmware.`,logout:`Cerrar sesión`,noLogoutPermission:`No tiene permiso para cerrar sesión`,failedToLoad:`Error al cargar los perfiles`,retry:`Reintentar`,time:{justNow:`Ahora mismo`,minsAgo:`hace {{count}} min`,hoursAgo:`hace {{count}} h`,daysAgo:`hace {{count}} d`},toast:{loggedOut:`Sesión cerrada`},login:{title:`Conectarse a Bambu Cloud`,subtitle:`Sincronice sus preajustes del laminador entre dispositivos`,email:`Correo`,password:`Contraseña`,region:`Región`,regionGlobal:`Global`,regionChina:`China`,verificationCode:`Código de verificación`,totpCode:`Código del autenticador`,checkEmail:`Compruebe su correo ({{email}}) en busca de un código de 6 dígitos`,enterTotpHint:`Introduzca el código de 6 dígitos de su aplicación de autenticación`,accessToken:`Token de acceso`,accessTokenHint:`Pegue su token de acceso de Bambu Cloud. Las cuentas de la región de China deben usar esta vía (vinculada al teléfono — inicio de sesión por correo no disponible). Consulte la wiki para saber cómo obtener el token de las cookies de MakerWorld.`,back:`Atrás`,loginButton:`Iniciar sesión`,verifyButton:`Verificar`,setTokenButton:`Establecer token`,useToken:`Usar token de acceso en su lugar`,captchaTitle:`Bambu Cloud solicita un CAPTCHA`,captchaBody:`Bambu está exigiendo un CAPTCHA a tu red antes de aceptar un inicio de sesión, y ese desafío no se puede responder desde Bambuddy. Tu correo y tu contraseña no son el problema. El bloqueo está ligado a tu dirección IP pública y suele desaparecer solo en unas horas; reintentar repetidamente lo prolonga. Para entrar ahora, usa un token de acceso obtenido en una sesión del navegador.`,useEmail:`Iniciar sesión con correo en su lugar`,toast:{loggedIn:`Sesión iniciada correctamente`,codeSent:`Código de verificación enviado a su correo`,enterTotp:`Introduzca el código de su aplicación de autenticación`,tokenSet:`Token establecido correctamente`}},presets:{myPreset:`Mi preajuste (editable)`,duplicate:`Duplicar`,editable:`Editable`,failedToLoadDetails:`Error al cargar los detalles del preajuste`,deleteConfirm:`¿Eliminar este preajuste?`,deleteWarning:`Esto eliminará permanentemente "{{name}}" de Bambu Cloud. Esto no se puede deshacer.`,noDuplicatePermission:`No tiene permiso para duplicar preajustes`,noEditPermission:`No tiene permiso para editar preajustes`,noDeletePermission:`No tiene permiso para eliminar preajustes`,types:{filament:`Preajuste de filamento`,printer:`Preajuste de impresora`,process:`Preajuste de proceso`},toast:{deleted:`Preajuste eliminado`,created:`Preajuste creado`,updated:`Preajuste actualizado`,duplicated:`Preajuste duplicado`,fieldAdded:`Campo "{{key}}" añadido`,exported:`Preajuste exportado`},baseLabel:`Base: {{name}}`,currentLabel:`Actual: {{name}}`,newPreset:`Nuevo preajuste`,editPreset:`Editar preajuste`,duplicatePreset:`Duplicar preajuste`,createNewPreset:`Crear nuevo preajuste`,customizeSettings:`Personalice los ajustes de su nuevo preajuste`,compareWithBase:`Comparar con el preajuste base`,compare:`Comparar`,basePreset:`Preajuste base`,selectBasePreset:`Seleccionar preajuste base...`,presetName:`Nombre del preajuste`,myCustomPreset:`Mi preajuste personalizado`,inheritsFrom:`Hereda de`,dropJsonToImport:`Suelte un JSON para importar`,tabs:{common:`Común`,allFields:`Todos los campos`},availableFields:`Campos disponibles`,searchFieldsPlaceholder:`Buscar campos...`,noMatchingFields:`No hay campos coincidentes`,allFieldsAdded:`Todos los campos añadidos`,addCustomField:`Añadir campo personalizado`,yourOverrides:`Sus anulaciones`,noOverridesYet:`Aún no hay anulaciones`,clickFieldsToAdd:`Haga clic en los campos de la izquierda para añadirlos`,saveAsTemplate:`Guardar como plantilla`,jsonTip:`Consejo: arrastre y suelte un archivo .json en cualquier parte de esta ventana para importar ajustes`},cloudView:{searchPlaceholder:`Buscar preajustes...`,templates:`Plantillas`,refresh:`Actualizar`,newPreset:`Nuevo preajuste`,clearFilters:`Borrar filtros`,compareMode:`Modo de comparación`,selectAnotherPreset:`Seleccione otro preajuste de {{type}}`,clickTwoPresets:`Haga clic en dos preajustes del mismo tipo para compararlos`,selectFirst:`1. Seleccione el primero`,selectSecond:`2. Seleccione el segundo`,compareNow:`Comparar ahora`,lastSynced:`Última sincronización:`,showingCount:`Mostrando {{showing}} de {{total}} preajustes`,noPresetsFound:`No se encontraron preajustes`,columns:{filament:`Filamento`,process:`Proceso`,printer:`Impresora`},noFilamentPresets:`No hay preajustes de filamento`,noProcessPresets:`No hay preajustes de proceso`,noPrinterPresets:`No hay preajustes de impresora`,filters:{type:`Tipo`,owner:`Propietario`,printer:`Impresora`,nozzle:`Boquilla`,filament:`Filamento`,layer:`Capa`,all:`Todos`,myPresets:`Mis preajustes`,builtIn:`Integrados`,process:`Proceso`},noTemplatesPermission:`No tiene permiso para gestionar plantillas`,noRefreshPermission:`No tiene permiso para actualizar perfiles`,noCreatePermission:`No tiene permiso para crear preajustes`},templates:{title:`Plantillas rápidas`,noTemplates:`Aún no hay plantillas`,createFirst:`Cree plantillas desde el editor de preajustes`,typeFilter:`Tipo:`,deleteTitle:`Eliminar plantilla`,deleteWarning:`Esta acción no se puede deshacer`,deleteConfirm:`¿Está seguro de que desea eliminar "{{name}}"?`,namePlaceholder:`Nombre de la plantilla`,descriptionPlaceholder:`Descripción`,settingsJson:`Ajustes (JSON)`,fieldsCount:`{{count}} campos`,shownInModals:`Mostrada en las ventanas`,hiddenInModals:`Oculta en las ventanas`,apply:`Aplicar`,toast:{deleted:`Plantilla eliminada`,updated:`Plantilla actualizada`,created:`Plantilla creada`,applied:`Plantilla aplicada`}}},support:{debugLoggingActive:`El registro de depuración está activo`,manageLogs:`Gestionar`,collectItem7:`Conectividad de la impresora y versiones de firmware`,collectItem8:`Estado de las integraciones (Spoolman, MQTT, HA)`,collectItem9:`Interfaces de red (solo subredes)`,collectItem10:`Versiones de los paquetes de Python`,collectItem11:`Comprobaciones de estado de la base de datos`,collectItem12:`Detalles del entorno de Docker`,bundleGenerating:`Generando paquete...`,bundleStepConnection:`Ejecutando comprobaciones de conectividad de impresoras`,bundleStepVirtualPrinters:`Ejecutando comprobaciones de configuración de impresoras virtuales`,bundleStepLogScan:`Analizando los registros recientes en busca de problemas conocidos`,bundleStepBuild:`Creando el archivo ZIP del paquete de soporte`},fileManager:{variants:{badge:`{{count}} versiones`,groupAction:`Agrupar como versiones`,groupTooltip:`Marcar estos archivos como el mismo trabajo laminado para distintas impresoras`,grouped:`{{count}} archivos agrupados como versiones`,printAlternatives:`Imprimir ({{count}} alternativas)`},title:`Gestor de archivos`,subtitle:`Organice y gestione sus archivos de impresión`,uploadFiles:`Subir archivos`,newFolder:`Nueva carpeta`,folderName:`Nombre de la carpeta`,folderNamePlaceholder:`p. ej., Piezas funcionales`,renameFile:`Renombrar archivo`,renameFolder:`Renombrar carpeta`,invalidFilenameChar:`El carácter "{{char}}" no está permitido en nombres de archivos de impresión. La tarjeta SD de la impresora rechaza: < > : " / \\ | ? *`,moveFiles:`Mover {{count}} archivo(s)`,rootNoFolder:`Raíz (sin carpeta)`,current:`actual`,linkFolder:`Vincular carpeta`,linkFolderDescription:`Vincule "{{name}}" a un proyecto o archivo para un acceso rápido.`,project:`Proyecto`,archive:`Archivo`,noProjectsFound:`No se encontraron proyectos`,noArchivesFound:`No se encontraron archivos`,unlink:`Desvincular`,link:`Vincular`,dragDropFiles:`Arrastre y suelte archivos aquí`,dropFilesHere:`Suelte archivos aquí`,releaseToUpload:`Suelte para subir`,orClickToBrowse:`o haga clic para examinar`,allFileTypesSupported:`Se admiten todos los tipos de archivo. Los archivos ZIP se extraerán.`,zipFilesDetected:`Archivos ZIP detectados`,zipExtractOptions:`Los archivos ZIP se extraerán. Elija cómo gestionar la estructura de carpetas:`,preserveZipStructure:`Conservar la estructura de carpetas del ZIP`,createFolderFromZip:`Crear una carpeta a partir del nombre del archivo ZIP`,stlThumbnailGeneration:`Generación de miniaturas STL`,zipMayContainStl:`Los archivos ZIP pueden contener archivos STL. Se pueden generar miniaturas durante la extracción.`,thumbnailsCanBeGenerated:`Se pueden generar miniaturas para los archivos STL. Los modelos grandes pueden tardar más en procesarse.`,generateThumbnailsForStl:`Generar miniaturas para los archivos STL`,threemfDetected:`Archivos 3MF detectados`,threemfExtractionInfo:`El modelo de impresora, el material, el color y los ajustes de impresión se extraerán automáticamente de los archivos 3MF.`,willBeExtracted:`Se extraerá`,filesExtracted:`{{count}} archivos extraídos`,uploadComplete:`Subida completada: {{succeeded}} con éxito`,uploadFailed:`Error al subir`,zipFilesFailed:`{{count}} archivos fallidos`,uploading:`Subiendo...`,changeLink:`Cambiar enlace...`,linkTo:`Vincular a...`,linkToProjectOrArchive:`Vincular a un proyecto o archivo`,generateThumbnail:`Generar miniatura`,generateThumbnails:`Generar miniaturas`,generateThumbnailsForMissing:`Generar miniaturas para los archivos STL que no las tienen`,gridView:`Vista de cuadrícula`,listView:`Vista de lista`,lowDiskSpaceWarning:`Advertencia de poco espacio en disco`,lowDiskSpaceDetails:`Solo {{free}} libres de {{total}} en total. El umbral está establecido en {{threshold}} GB en los ajustes.`,files:`Archivos`,folders:`Carpetas`,size:`Tamaño`,free:`Libre`,allFiles:`Todos los archivos`,allExternal:`Externos`,externalIsEmpty:`Sin archivos externos`,externalEmptyDescription:`Los archivos de tus carpetas externas vinculadas aparecerán aquí.`,wrap:`Ajustar`,enableTextWrapping:`Activar el ajuste de texto`,disableTextWrapping:`Desactivar el ajuste de texto`,collapse:`Contraer`,collapseFoldersByDefault:`Contraer las carpetas de forma predeterminada`,expandFoldersByDefault:`Expandir las carpetas de forma predeterminada`,folderSort:`Ordenar carpetas`,folderSortByName:`Por nombre`,folderSortByActivity:`Por actividad reciente`,dragToResizeTooltip:`Arrastre para redimensionar, doble clic para restablecer`,searchFiles:`Buscar archivos...`,searchSubfoldersHint:`Incluyendo subcarpetas`,readme:{truncated:`Truncado`,show:`Mostrar README`,hide:`Ocultar README`,label:`README`},tags:{title:`Etiquetas`,subtitle:`Etiqueta archivos para filtros transversales — juguetes, apto para niños, solo PETG, lo que necesites.`,manage:`Etiquetas`,manageTitle:`Gestionar el catálogo de etiquetas`,add:`Nueva etiqueta`,edit:`Renombrar etiqueta`,name:`Nombre`,fileCount:`Archivos`,empty:`Aún no hay etiquetas. Crea una para empezar a etiquetar archivos.`,noMatches:`No hay etiquetas que coincidan.`,createPlaceholder:`p. ej. juguetes, apto-niños, petg`,createButton:`Crear`,nameRequired:`El nombre es obligatorio.`,searchPlaceholder:`Filtrar etiquetas...`,created:`Etiqueta creada.`,updated:`Etiqueta renombrada.`,deleted:`Etiqueta eliminada.`,saveFailed:`No se pudo guardar la etiqueta.`,deleteFailed:`No se pudo eliminar la etiqueta.`,applyFailed:`No se pudieron aplicar las etiquetas.`,applyAdd:`Añadir etiquetas`,applyRemove:`Quitar etiquetas`,applyAddSuccess:`Se añadieron {{count}} etiqueta(s) en {{files}} archivo(s).`,applyRemoveSuccess:`Se quitaron {{count}} etiqueta(s) en {{files}} archivo(s).`,actionAdd:`Añadir a los archivos seleccionados`,actionRemove:`Quitar de los archivos seleccionados`,tagAction:`Etiquetar`,bulkTitle:`Etiquetar {{count}} archivo(s) seleccionado(s)`,bulkTooltip:`Añadir o quitar etiquetas en cada archivo seleccionado.`,noPermission:`No tienes permiso para etiquetar archivos.`,filterLabel:`Filtrando por:`,clearAll:`Limpiar todo`,confirmDelete:`¿Eliminar la etiqueta "{{name}}"?`,confirmDeleteMessage:`Esto elimina la etiqueta del catálogo. Los archivos conservan sus otras etiquetas.`,confirmDeleteInUseMessage:`Esta etiqueta está en {{count}} archivo(s). Al eliminarla desaparece de todos; los archivos en sí no se tocan.`,editAria:`Editar {{name}}`,deleteAria:`Eliminar {{name}}`},allTypes:`Todos los tipos`,prints:`Impresiones`,ascending:`Ascendente`,descending:`Descendente`,showModified:`Mostrar fechas de modificación`,hideModified:`Ocultar fechas de modificación`,lastModified:`Última modificación`,lastActivity:`Última actividad`,resultsCount:`{{showing}} de {{total}} archivos`,selectAll:`Seleccionar todo`,deselectAll:`Deseleccionar todo`,selected:`{{count}} seleccionados`,adding:`Añadiendo...`,loadingFiles:`Cargando archivos...`,folderIsEmpty:`La carpeta está vacía`,noFilesYet:`Aún no hay archivos`,folderEmptyDescription:`Suba archivos o mueva archivos a esta carpeta para empezar.`,noFilesDescription:`Suba archivos para empezar a organizar sus archivos relacionados con la impresión.`,noMatchingFiles:`No hay archivos coincidentes`,noMatchingFilesDescription:`Ningún archivo coincide con su búsqueda o los criterios de filtro actuales.`,clearFilters:`Borrar filtros`,printedCount:`Impreso {{count}} veces`,uploadedBy:`Subido por`,deleteFolder:`Eliminar carpeta`,deleteFile:`Eliminar archivo`,deleteFilesCount:`Eliminar {{count}} archivos`,deleteFolderConfirm:`¿Está seguro de que desea eliminar esta carpeta? Todos los archivos que contiene también se eliminarán.`,deleteFileConfirm:`¿Está seguro de que desea eliminar este archivo?`,deleteFilesConfirm:`¿Está seguro de que desea eliminar {{count}} archivos seleccionados? Esta acción no se puede deshacer.`,deleting:`Eliminando...`,noPermissionRenameFolder:`No tiene permiso para renombrar carpetas`,noPermissionLinkFolder:`No tiene permiso para vincular carpetas`,noPermissionDeleteFolder:`No tiene permiso para eliminar carpetas`,onlyEmptyFoldersDeletable:`Solo puede eliminar carpetas vacías`,noPermissionPrint:`No tiene permiso para imprimir`,noPermissionAddToQueue:`No tiene permiso para añadir a la cola`,noPermissionSlice:`No tiene permiso para laminar archivos`,noPermissionDownload:`No tiene permiso para descargar archivos`,noPermissionPreview:`No tienes permiso para previsualizar archivos`,preview3d:`Vista previa 3D`,noPermissionRenameFile:`No tiene permiso para renombrar este archivo`,noPermissionGenerateThumbnail:`No tiene permiso para generar miniaturas`,noPermissionDeleteFile:`No tiene permiso para eliminar este archivo`,noPermissionCreateFolder:`No tiene permiso para crear carpetas`,noPermissionUpload:`No tiene permiso para subir archivos`,noPermissionMoveFiles:`No tiene permiso para mover archivos`,noPermissionDeleteFiles:`No tiene permiso para eliminar archivos`,linkExternal:`Vincular externa`,linkExternalFolder:`Vincular carpeta externa`,linkExternalFolderDescription:`Monte un directorio del host (NAS, USB, recurso compartido de red) en el gestor de archivos. Los archivos no se copian — se accede a ellos directamente desde la ruta original.`,externalFolderNamePlaceholder:`p. ej., Impresiones del NAS`,externalPath:`Ruta del host`,externalPathHelp:`Ruta absoluta al directorio en el host de Docker. Debe estar montado por enlace en el contenedor.`,readOnly:`Solo lectura`,readOnlyHelp:`impide las subidas y eliminaciones`,showHiddenFiles:`Mostrar archivos ocultos (con punto)`,externalFolder:`Carpeta externa`,scanFolder:`Escanear`,toast:{folderCreated:`Carpeta creada`,openInSlicerFailed:`No se pudo abrir en el laminador`,folderDeleted:`Carpeta eliminada`,fileDeleted:`Archivo eliminado`,filesDeleted:`Se eliminaron {{count}} archivos`,filesMoved:`Archivos movidos`,folderLinked:`Carpeta vinculada`,folderUnlinked:`Carpeta desvinculada`,externalFolderLinked:`Carpeta externa vinculada y escaneada`,folderScanned:`Escaneo completado: {{added}} añadidos, {{removed}} eliminados`,addedToQueue:`Se añadieron {{count}} archivo(s) a la cola`,addedToQueuePartial:`Se añadieron {{added}} archivo(s), {{failed}} fallidos`,failedToAddToQueue:`Error al añadir los archivos: {{error}}`,fileRenamed:`Archivo renombrado`,folderRenamed:`Carpeta renombrada`,thumbnailsGenerated:`Se generaron {{count}} miniatura(s)`,thumbnailsGeneratedPartial:`Se generaron {{succeeded}} miniatura(s), {{failed}} fallidas`,noStlMissingThumbnails:`No hay archivos STL sin miniaturas`,failedToGenerateThumbnails:`Error al generar las miniaturas: {{error}}`,thumbnailGenerated:`Miniatura generada`,failedToGenerateThumbnail:`Error al generar la miniatura: {{error}}`}},projects:{parentLabel:`Proyecto principal`,parentNone:`Ninguno (proyecto de nivel superior)`,parentHint:`Anida este proyecto en otro para que sus cifras se sumen en un proyecto maestro`,partOf:`Parte de {{name}}`,subProjectCount:`{{count}} subproyectos`,subProjectsOf:`Subproyectos de {{name}}`,collapseSubProjects:`Contraer subproyectos`,expandSubProjects:`Expandir subproyectos`,title:`Proyectos`,subtitle:`Organice y haga el seguimiento de sus proyectos de impresión 3D`,newProject:`Nuevo proyecto`,editProject:`Editar proyecto`,deleteProject:`Eliminar proyecto`,projectName:`Nombre del proyecto`,description:`Descripción`,noProjects:`Aún no hay proyectos`,noProjectsFiltered:`No hay proyectos {{status}}`,noProjectsFilteredHelp:`No tiene ningún proyecto {{status}}. Los proyectos aparecerán aquí cuando cambie su estado.`,createFirst:`Cree su primer proyecto para empezar a organizar impresiones relacionadas, hacer el seguimiento del progreso y gestionar sus construcciones.`,createFirstButton:`Cree su primer proyecto`,create:`Crear`,files:`Archivos`,prints:`Impresiones`,plates:`camas`,parts:`piezas`,lastModified:`Última modificación`,deleteConfirm:`¿Está seguro de que desea eliminar este proyecto? Los archivos y los elementos de la cola se desvincularán pero no se eliminarán.`,addFiles:`Añadir archivos`,removeFile:`Quitar archivo`,viewDetails:`Ver detalles`,namePlaceholder:`p. ej., Construcción de Voron 2.4`,descriptionPlaceholder:`Descripción opcional...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`La URL debe empezar por http:// o https://`,openExternalUrl:`Abrir la URL del proyecto`,coverImageLabel:`Foto de portada`,coverImageAlt:`Foto de portada del proyecto`,coverImageUpload:`Subir`,coverImageReplace:`Reemplazar`,coverImageRemove:`Quitar`,color:`Color`,targetPlates:`Camas objetivo`,targetPlatesPlaceholder:`p. ej., 25`,targetPlatesHelp:`Número de trabajos de impresión`,targetParts:`Piezas objetivo`,targetPartsPlaceholder:`p. ej., 150`,targetPartsHelp:`Total de objetos necesarios`,targetSets:`Copias por archivo`,targetSetsPlaceholder:`p. ej., 10`,targetSetsHelp:`Veces que debe imprimirse cada archivo imprimible`,tagsLabel:`Etiquetas (separadas por comas)`,tagsPlaceholder:`p. ej., voron, funcional, regalo`,dueDate:`Fecha límite`,priority:`Prioridad`,priorityLow:`Baja`,priorityNormal:`Normal`,priorityHigh:`Alta`,priorityUrgent:`Urgente`,statusActive:`Activo`,statusCompleted:`Completado`,statusArchived:`Archivado`,done:`Hecho`,completed:`completadas`,failed:`fallidas`,inQueue:`en cola`,noPrintsYet:`Aún no hay impresiones`,printJobs:`Trabajos de impresión (camas)`,partsPrinted:`Piezas impresas`,failedParts:`Piezas fallidas`,import:`Importar`,export:`Exportar`,importProject:`Importar proyecto`,exportAll:`Exportar todos los proyectos`,loading:`Cargando proyectos...`,noEditPermission:`No tiene permiso para editar proyectos`,noDeletePermission:`No tiene permiso para eliminar proyectos`,noCreatePermission:`No tiene permiso para crear proyectos`,noImportPermission:`No tiene permiso para importar proyectos`,noExportPermission:`No tiene permiso para exportar proyectos`,toast:{created:`Proyecto creado`,updated:`Proyecto actualizado`,deleted:`Proyecto eliminado`,imported:`Proyecto importado`,multipleImported:`{{count}} proyectos importados`,importFailed:`Error en la importación`,exported:`Proyectos exportados (solo metadatos)`}},projectDetail:{notFound:`Proyecto no encontrado`,backToProjects:`Volver a Proyectos`,export:`Exportar`,exportProject:`Exportar proyecto`,noExportPermission:`No tiene permiso para exportar proyectos`,noEditPermission:`No tiene permiso para editar proyectos`,partOf:`Parte de:`,priorityLabel:`Prioridad:`,noPrints:`Aún no hay impresiones en este proyecto`,status:{active:`Activo`,completed:`Completado`,archived:`Archivado`},priority:{low:`Baja`,normal:`Normal`,high:`Alta`,urgent:`Urgente`},dueDate:{overdue:`Atrasado`,today:`Vence hoy`,daysLeft:`Quedan {{count}} días`},progress:{platesProgress:`Progreso de camas`,partsProgress:`Progreso de piezas`,setsProgress:`Juegos completos`,sets:`juegos`,setsHint:`Un juego está completo cuando cada archivo imprimible alcanza este número`,printJobs:`trabajos de impresión`,parts:`piezas`,percentComplete:`{{percent}}% completado`,remaining:`{{count}} restantes`},stats:{printJobs:`Trabajos de impresión`,total:`total`,failed:`{{count}} fallidos`,partsPrinted:`{{count}} piezas impresas`,printTime:`Tiempo de impresión`,filamentUsed:`Filamento usado`},cost:{title:`Seguimiento de costes`,filamentCost:`Coste del filamento`,energy:`Energía`,totalCost:`Coste total`,total:`Total`,includesBom:`incl. lista de materiales`,budget:`Presupuesto`,remaining:`Restante`},subProjects:{title:`Subproyectos ({{count}})`,jobs:`{{count}} trabajos`},rollup:{title:`Incluyendo {{count}} subproyectos`,progress:`Progreso general`,percentComplete:`{{percent}}% completado`},notes:{title:`Notas`,noEditPermission:`No tiene permiso para editar notas`,placeholder:`Añada notas sobre este proyecto...`,empty:`Aún no hay notas. Haga clic en Editar para añadir notas.`},files:{title:`Archivos`,linkFolders:`Vincule carpetas del gestor de archivos`,forQuickAccess:`a este proyecto para un acceso rápido.`,fileCount:`{{count}} archivo(s)`,empty:`No hay carpetas vinculadas. Vaya al gestor de archivos y vincule una carpeta a este proyecto.`,printedCount:`Impreso {{count}} veces`,progressTooltip:`{{done}} de {{target}} impresiones completadas`,noFiles:`No hay archivos en esta carpeta.`},bom:{title:`Lista de materiales`,acquired:`{{completed}}/{{total}} adquiridos`,showAll:`Mostrar todo`,hideDone:`Ocultar los hechos`,addPart:`Añadir pieza`,noAddPermission:`No tiene permiso para añadir piezas`,partNamePlaceholder:`Nombre de la pieza (p. ej., tornillos M3x8)`,partName:`Nombre de la pieza`,qty:`Cant.`,price:`Precio ({{currency}})`,sourcingUrlPlaceholder:`URL de aprovisionamiento (opcional)`,remarksPlaceholder:`Observaciones (opcional)`,deletePart:`Eliminar pieza`,deleteConfirm:`¿Está seguro de que desea eliminar "{{name}}"?`,noUpdatePermission:`No tiene permiso para actualizar piezas`,noEditPermission:`No tiene permiso para editar piezas`,noDeletePermission:`No tiene permiso para eliminar piezas`,totalCost:`Coste total:`,empty:`No hay piezas en la lista de materiales. Añada hardware, componentes electrónicos u otros componentes para hacer el seguimiento de lo que hay que aprovisionar.`},timeline:{title:`Cronología de actividad`,empty:`Aún no hay actividad.`},template:{saveAsTemplate:`Guardar como plantilla`,noCreatePermission:`No tiene permiso para crear plantillas`},queue:{title:`Cola`,viewAll:`Ver todo`,printing:`{{count}} imprimiendo`,queued:`{{count}} en cola`},prints:{title:`Impresiones ({{count}})`},toast:{projectUpdated:`Proyecto actualizado`,partAdded:`Pieza añadida`,partRemoved:`Pieza eliminada`,exportFailed:`Error en la exportación`,projectExported:`Proyecto exportado`,templateCreated:`Plantilla creada`}},system:{title:`Información del sistema`,version:`Versión`,uptime:`Tiempo de actividad`,cpuUsage:`Uso de la CPU`,memoryUsage:`Uso de la memoria`,diskUsage:`Uso del disco`,networkInfo:`Información de la red`,logs:`Registros`,debugMode:`Modo de depuración`,enableDebug:`Activar el registro de depuración`,disableDebug:`Desactivar el registro de depuración`,downloadLogs:`Descargar registros`,clearLogs:`Borrar registros`,dockerInfo:`Información de Docker`,containerName:`Nombre del contenedor`,imageName:`Nombre de la imagen`,platform:`Plataforma`,architecture:`Arquitectura`},sponsors:{sectionTitle:`Independiente y financiado por la comunidad`,tagline:`Bambuddy es gratuito y seguirá siéndolo porque hay quien decide apoyarlo. Sin VC, sin dependencia de la nube.`,viewSupporters:`Ver patrocinadores`,toastPrints:`Has completado {{count}} impresiones con Bambuddy. Bambuddy sigue siendo gratuito gracias a quienes lo apoyan.`,toastCost:`Has rastreado {{total}} de filamento con Bambuddy. Mira quién mantiene el proyecto independiente.`,toastArchives:`{{count}} impresiones archivadas con Bambuddy. Mira quién lo mantiene independiente.`,toastAnniversary:`¡Un año con Bambuddy! Mira quién mantiene el proyecto independiente.`,toastVersionUpdate:`Actualizado a v{{version}}. Bambuddy sigue siendo gratuito gracias a quienes lo apoyan.`,toastBusiness:`¿Usas Bambuddy en {{count}} impresoras? Existe un plan de soporte para equipos: correcciones prioritarias, facturación y contacto directo con el responsable del proyecto.`,businessCta:`Bambuddy para empresas`,businessTitle:`Bambuddy para empresas`,businessTagline:`Estás gestionando {{count}} impresoras. Hay soporte prioritario, licencias comerciales y facturación disponibles para equipos y granjas de impresión.`},library:{title:`Biblioteca de filamentos`,addFilament:`Añadir filamento`,editFilament:`Editar filamento`,deleteFilament:`Eliminar filamento`,vendor:`Proveedor`,material:`Material`,color:`Color`,kFactor:`Factor K`,temperature:`Temperatura`,noFilaments:`No hay filamentos en la biblioteca`,deleteConfirm:`¿Está seguro de que desea eliminar este filamento?`,importFromPrinter:`Importar desde la impresora`,exportToFile:`Exportar a un archivo`,runWithPipeline:{actionLabel:`Ejecutar con pipeline`,noPermission:`No tienes permiso para ejecutar pipelines`,modalTitle:`Ejecutar con pipeline`,confirmTitle:`Confirmar ejecución`,confirmIntro:`El pre-vuelo encontró problemas con esta ejecución`,sourceHint:`Origen`,pipelineHint:`Pipeline`,targetHint:`Destino`,pipelineListAria:`Pipelines disponibles`,runAnyway:`Ejecutar de todos modos`,loading:`Cargando…`,empty:`Aún no hay pipelines guardadas. Abre el diálogo Cortar y haz clic en "Guardar como pipeline" para crear una.`,noTarget:`Sin impresora de destino`,noTargetMessage:`Esta pipeline no tiene impresora de destino. Ábrela en Ajustes para elegir una.`,copies:`Copias`,copiesHint:`máx {{n}}`,classTarget:`Cualquier {{model}}`,toast:{started:`Ejecución de pipeline iniciada`,failed:`No se pudo iniciar la ejecución`},issue:{printerNotSet:`Sin impresora de destino en esta pipeline.`,printerNotFound:`La impresora de destino ya no existe.`,printerDisabled:`La impresora de destino está deshabilitada.`,printerOffline:`La impresora de destino está desconectada.`,filamentType:`Slot de filamento {{slot}}: esperado {{expected}}, AMS tiene {{actual}}`,filamentColor:`Slot de filamento {{slot}}: color distinto (esperado {{expected}}, AMS tiene {{actual}})`,amsSlotMissing:`Slot AMS {{slot}} no disponible en esta impresora`,filamentUnverified:`Slot de filamento {{slot}} proviene de un preset de nube / estándar y no se pudo verificar estáticamente.`,noClassMatches:`Ninguna impresora en esta instalación coincide con la clase de modelo objetivo de la pipeline ({{expected}}).`,classNotSet:`El destino de la pipeline es una clase de impresora pero no se eligió ningún modelo.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Se muestran los valores predeterminados del laminador: tu sidecar es más antiguo que esta función y no puede informar los valores de un perfil. Actualiza la imagen del sidecar para verlos. Todo lo que no cambies seguirá usando el perfil.`,presetValuesNotConfigured:`Se muestran los valores predeterminados del laminador: no hay ningún sidecar configurado, así que no se pueden leer los valores de un perfil. Todo lo que no cambies seguirá usando el perfil.`,presetValuesSidecarUnavailable:`Se muestran los valores predeterminados del laminador: el sidecar no respondió, así que no se pueden leer los valores de un perfil. Todo lo que no cambies seguirá usando el perfil.`,presetValuesUnavailable:`Se muestran los valores predeterminados del laminador: no se pudieron leer los del perfil seleccionado. Todo lo que no cambies seguirá usando el perfil.`,filamentDefault:`Predeterminado`,fromFile:`del archivo`,fromFileHint:`El diseñador cambió esto en el archivo de origen. Su valor es {{value}}.`,fromFilePrinterCoupled:`impresora del diseñador`,fromFilePrinterCoupledHint:`Ajustado para la impresora para la que se diseñó este archivo: en la tuya puede ser incorrecto o estar fuera de rango.`,fromFileOverridesPreset:`anula el perfil`,fromFileOverridesPresetHint:`El archivo lo fija en {{value}} mientras que el perfil elegido usa {{preset}}. Actívalo solo si debe mandar el archivo.`,useFromFile:`Usar el valor del archivo de origen para {{option}}`,otherFromFile:`Otros ajustes de este archivo`,fromFileSummary:`El diseñador cambió {{count}} ajustes de proceso en este archivo. Solo se usan los que marques.`,fromFileUseAll:`Usar los ajustes del diseñador`,fromFileUseAllHint:`Marca los ajustes que se trasladan a otras impresoras. Los ajustados a la impresora del diseñador, y los que definen el perfil que elegiste, quedan sin marcar.`,fromFileClear:`Borrar {{count}}`,loading:`Cargando ajustes del laminador…`,mode:{simple:`Simple`,advanced:`Avanzado`,expert:`Experto`},searchPlaceholder:`Buscar ajustes`,resetAll:`Restablecer {{count}}`,resetOption:`Restablecer al valor predeterminado`,noMatches:`Ningún ajuste coincide con esta búsqueda.`},slice:{filamentSlotUnset:`sin definir`,processSettingsEmbedded:`No se usa mientras «Usar los ajustes integrados del archivo» está activo: los ajustes del propio archivo rigen este corte.`,processSettingsInactive:`Inactivo`,presetsHidden:`{{count}} ocultos`,showAllPresets:`Mostrar todos`,showFewerPresets:`Mostrar menos`,processSettings:`Ajustes de proceso`,processSettingsHint:`Ajusta el perfil seleccionado para este corte. Todo lo que no toques se mantiene como lo define el perfil.`,processSettingsChanged:`{{count}} cambiados`,processSettingsUnchanged:`Valores del perfil`,title:`Laminar modelo`,action:`Laminar`,actionAll:`Laminar las {{count}} bandejas`,actionAllTitle:`Laminar todas las bandejas en una salida única de varias bandejas (un solo archivo). La selección de filamento cubre cada hueco que defina el proyecto.`,allPlatesToggle:`Laminar las {{count}} bandejas`,slicing:`Laminando…`,printer:`Perfil de impresora`,process:`Perfil de proceso`,filament:`Perfil de filamento`,filamentSlot:`Filamento {{index}} ({{type}})`,filamentColour:`Color del filamento`,selectPreset:`— Seleccione un preajuste —`,loadingPresets:`Cargando preajustes…`,analyzingPlateFilaments:`Analizando los filamentos de la cama…`,analyzingPlateFilamentsHint:`Ejecutando un laminado de vista previa para descubrir qué ranuras del AMS usa esta cama. Después se almacena en caché — volver a abrir es instantáneo.`,previewToast:`Analizando {{name}} — {{elapsed}}`,previewWithProgress:`Analizando {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— no usado por esta cama`,noPresetsForSlot:`No hay preajustes disponibles`,otherPrinters:`Otras impresoras`,presetsLoadFailed:`Error al cargar los preajustes. Abra Ajustes → Perfiles para importarlos primero.`,refreshPresets:`Actualizar`,refreshPresetsTitle:`Actualizar preajustes — recuperar los listados más recientes de la nube y los paquetes (úselo tras eliminar un preajuste en Bambu Studio o Bambu Handy)`,allPresetsRequired:`Deben seleccionarse todos los preajustes`,useEmbedded:`Usar la configuración incorporada del archivo`,useEmbeddedHint:`Laminar tal como lo configuró el diseñador (perímetros, relleno, filamento) en lugar de los perfiles de arriba. Disponible porque tu impresora coincide con la del archivo.`,autoOrient:`Orientar los objetos automáticamente`,autoOrientHint:`El laminador gira cada objeto hacia su mejor cara de impresión antes de laminar. Sustituye la orientación del archivo.`,autoArrange:`Organizar automáticamente en la base`,autoArrangeHint:`El laminador coloca los objetos para que dejen de solaparse. Sustituye la disposición del archivo.`,enqueuing:`Enviando el trabajo de laminado…`,queued:`En cola…`,failed:`Error al laminar. Consulte los registros del contenedor auxiliar del laminador.`,startedToast:`Laminando {{name}} en segundo plano…`,queuedToast:`En cola: {{name}} — {{elapsed}}`,runningToast:`Laminando {{name}} — {{elapsed}}`,runningWithProgress:`{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,runningWithProgressMultiPlate:`Bandeja {{plateIndex}} de {{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,completedToast:`{{name}} laminado`,externalWriteFallbackToast:`Guardado en la biblioteca interna: no se pudo escribir en la carpeta externa`,failedTitle:`Error al laminar`,failedToast:`Error al laminar {{name}}: {{detail}}`,tier:{local:`Importado`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Estándar`},cloud:{notAuthenticated:`Inicie sesión en Bambu Cloud (Ajustes → Perfiles → Bambu Cloud) para ver sus preajustes de la nube.`,expired:`La sesión de Bambu Cloud ha caducado — inicie sesión de nuevo para actualizar sus preajustes de la nube.`,unreachable:`Bambu Cloud no es accesible en este momento. Los preajustes locales y estándar siguen funcionando.`},orcaCloud:{notAuthenticated:`Inicia sesión en Orca Cloud (Perfiles → Orca Cloud) para ver tus preajustes Orca.`,expired:`Sesión de Orca Cloud caducada — inicia sesión de nuevo para actualizar tus preajustes Orca.`,unreachable:`Orca Cloud no está disponible ahora. Otros preajustes siguen funcionando.`},bedType:{label:`Cama de impresión`,auto:`Automático (usar el preajuste de proceso)`,coolPlate:`Cool Plate`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`},pipelines:{label:`Pipeline`,applyAria:`Aplicar pipeline`,applyPrompt:`Aplicar pipeline…`,empty:`Sin pipelines guardadas`,saveButton:`Guardar como pipeline`,saveTitle:`Guardar la selección actual de los cuatro ajustes como pipeline reutilizable`,namePlaceholder:`Nombre de la pipeline`,nameAria:`Nuevo nombre de pipeline`,toast:{applied:`"{{name}}" aplicada`,saved:`Pipeline guardada`,saveFailed:`Error al guardar`}}},spoolman:{title:`Integración con Spoolman`,enabled:`Spoolman activado`,url:`URL de Spoolman`,connected:`Conectado`,disconnected:`No conectado`,testConnection:`Probar conexión`,sync:`Sincronizar`,syncing:`Sincronizando...`,lastSync:`Última sincronización`,linkToSpoolman:`Vincular a Spoolman`,openInSpoolman:`Abrir en Spoolman`,unlinkSpool:`Desvincular bobina`,unlinkConfirmTitle:`¿Desasignar la bobina?`,unlinkConfirmMessage:`Esto quitará la bobina de esta ranura. Los datos de la bobina en sí permanecerán sin cambios.`,selectSpool:`Seleccionar bobina`,noUnlinkedSpools:`No hay bobinas sin asignar disponibles`,linkSuccess:`Bobina asignada correctamente`,linkFailed:`Error al asignar la bobina`,unlinkSuccess:`Bobina desasignada correctamente`,unlinkFailed:`Error al desasignar la bobina`,linkedSpool:`Bobina asignada`,spoolId:`ID de la bobina`,fillSourceLabel:`(Spoolman)`,weight:`Peso`,remaining:`Restante`,disableWeightSync:`Desactivar la sincronización del peso estimado del AMS`,disableWeightSyncDesc:`No actualizar la capacidad restante a partir de las estimaciones del AMS. Use esto si prefiere el seguimiento del uso de Spoolman a las estimaciones del AMS basadas en porcentajes. Las bobinas nuevas seguirán usando la estimación del AMS como su peso inicial.`,reportPartialUsage:`Informar del uso parcial en las impresiones fallidas`,reportPartialUsageDesc:`Cuando una impresión falla o se cancela, informar del filamento estimado usado hasta ese punto según el progreso de las capas.`},locations:{title:`Ubicaciones de almacenamiento`,subtitle:`Gestione estantes, cajones y otros lugares físicos para sus bobinas`,add:`Añadir ubicación`,addShort:`Añadir`,edit:`Editar ubicación`,name:`Nombre`,spools:`Bobinas`,sensors:`Sensores`,empty:`Aún no hay ubicaciones de almacenamiento. Cree su primer estante o cajón.`,manage:`Ubicaciones`,createPlaceholder:`p. ej. Estante A, Cajón 1`,nameRequired:`El nombre de la ubicación es obligatorio`,created:`Ubicación creada`,updated:`Ubicación actualizada`,deleted:`Ubicación eliminada`,saveFailed:`No se pudo guardar la ubicación`,deleteFailed:`No se pudo eliminar la ubicación`,deleteBlocked:`Retire todas las bobinas de esta ubicación antes de eliminarla`,confirmDelete:`¿Eliminar «{{name}}»?`,confirmDeleteMessage:`Esta ubicación se eliminará del catálogo. Mueva las bobinas primero.`,confirmDeleteMessageWithSensors:`Esta ubicación se eliminará del catálogo. Mueva las bobinas primero. Los sensores conectados también se eliminarán.`},inventory:{title:`Inventario de bobinas`,subtitle:`Gestione sus bobinas`,addToInventory:`Añadir al inventario`,addToInventoryPending:`Añadiendo...`,addToInventorySuccess:`Bobina añadida al inventario`,addToInventoryFailed:`No se pudo añadir la bobina al inventario`,unknownSpoolTitle:`Nuevo filamento detectado`,unknownSpoolMessage:`Se ha detectado una bobina con una etiqueta RFID desconocida en {{location}}. ¿Añadirla a su inventario ahora?`,unknownSpoolSlot:`Ranura`,bulk:{selectAllVisible:`Seleccionar todo lo visible`,selectRow:`Seleccionar fila`,selectGroup:`Seleccionar grupo`,selectionCount:`{{count}} seleccionadas`,edit:`Editar`,printLabels:`Imprimir etiquetas`,resetUsage:`Restablecer uso`,restore:`Restaurar`,archive:`Archivar`,delete:`Eliminar`,clearSelection:`Limpiar selección`,editTitle:`Edición masiva de bobinas`,editSubtitle:`Se aplica a {{count}} bobinas seleccionadas. Solo se actualizan los campos marcados.`,editHint:`Escriba en un campo para marcarlo para actualización — solo se envían las filas marcadas. Los campos vacíos no cambian las bobinas (vaciar campos solo se hace por bobina).`,useCustom:`Usar "{{value}}"`,toggleField:`Activar la actualización de este campo`,changeCount:`Se actualizarán {{count}} campos.`,applyPending:`Aplicando...`,applyButton:`Aplicar a {{count}} bobinas`,deleteTitle:`Eliminar bobinas seleccionadas`,archiveTitle:`Archivar bobinas seleccionadas`,restoreTitle:`Restaurar bobinas seleccionadas`,resetUsageTitle:`Restablecer uso de bobinas seleccionadas`,deleteMessage:`¿Eliminar permanentemente {{count}} bobinas? Esto no se puede deshacer.`,archiveMessage:`¿Archivar {{count}} bobinas? Se pueden restaurar más tarde.`,restoreMessage:`¿Restaurar {{count}} bobinas archivadas?`,resetUsageMessage:`¿Restablecer el contador "Total consumido" en {{count}} bobinas? El peso restante se conserva.`,updateSuccess:`{{count}} bobinas actualizadas`,updateFailed:`Actualización masiva fallida`,updatePartial:`{{ok}} bobinas actualizadas, {{failed}} fallidas`,updateAllFailed:`Las {{count}} actualizaciones fallaron — la selección se mantiene para reintentar`,deleteSuccess:`{{count}} bobinas eliminadas`,deleteFailed:`Eliminación masiva fallida`,deletePartial:`{{ok}} bobinas eliminadas, {{failed}} fallidas`,deleteAllFailed:`Las {{count}} eliminaciones fallaron — la selección se mantiene para reintentar`,archiveSuccess:`{{count}} bobinas archivadas`,archiveFailed:`Archivado masivo fallido`,archivePartial:`{{ok}} bobinas archivadas, {{failed}} fallidas`,archiveAllFailed:`Los {{count}} archivados fallaron — la selección se mantiene para reintentar`,restoreSuccess:`{{count}} bobinas restauradas`,restoreFailed:`Restauración masiva fallida`,restorePartial:`{{ok}} bobinas restauradas, {{failed}} fallidas`,restoreAllFailed:`Las {{count}} restauraciones fallaron — la selección se mantiene para reintentar`,invalidHex:`Introduzca 6 caracteres hex (RRGGBB) u 8 (RRGGBBAA). De lo contrario el campo no se aplicará.`},spoolmanMixedContentTitle:`Spoolman no se puede cargar por HTTPS — contenido mixto bloqueado por su navegador`,spoolmanMixedContentBody:`Bambuddy se sirve por HTTPS (mediante su proxy inverso), pero su URL de Spoolman sigue siendo HTTP sin cifrar. Los navegadores bloquean el contenido mixto por seguridad, por lo que la interfaz integrada de Spoolman no se puede mostrar. Spoolman debe ser accesible por HTTPS para que esto funcione.`,spoolmanMixedContentFixReverseProxy:`Ponga Spoolman tras el mismo proxy inverso que Bambuddy (Traefik / Nginx / Caddy) con HTTPS y luego actualice la URL de Spoolman en Ajustes a la nueva dirección HTTPS.`,spoolmanMixedContentFixOpenNewTab:`Como solución alternativa, abra Spoolman en una pestaña nueva del navegador por HTTP — las reglas de contenido mixto solo se aplican a los marcos integrados, por lo que una pestaña independiente sí funciona.`,spoolmanOpenInNewTab:`Abrir Spoolman en una pestaña nueva`,labels:{title:`Imprimir etiquetas de bobinas`,selectedCount:`{{count}} seleccionadas`,pickSpools:`Elija para qué bobinas imprimir etiquetas:`,monochrome:`Monocromo (impresora en blanco y negro)`,monochromeHint:`Elimina la muestra de color y amplía el texto`,startingPosition:`Posición inicial de la etiqueta`,startingPositionRange:`Solo plantillas de hoja: L7160 admite 1–21; 5160 admite 1–30.`,startingPositionInvalid:`Introduce un número entero del 1 al {{capacity}}.`,startingPositionFirst:`La impresión comienza en la posición 1.`,startingPositionSkipped:`Las posiciones 1 a {{lastPosition}} quedarán vacías en la primera hoja.`,startingPositionRangeError:`La posición inicial debe estar entre 1 y {{capacity}} para esta hoja.`,searchPlaceholder:`Buscar nombre, marca o n.º de ID`,filterByMaterial:`Material:`,allMaterials:`Todos`,selectVisible:`Seleccionar todas las visibles ({{count}})`,deselectVisible:`Deseleccionar las visibles`,clearAll:`Borrar todo`,noSpoolsToShow:`No hay bobinas que mostrar. Ajuste su filtro e inténtelo de nuevo.`,noMatches:`Ninguna bobina coincide con la búsqueda o el filtro actuales.`,printOne:`Imprimir etiqueta para esta bobina`,printLabels:`Imprimir etiquetas…`,bulkTitle:`Elija las bobinas para las que imprimir etiquetas de las {{count}} mostradas actualmente`,noSpoolsTitle:`No hay bobinas que etiquetar`,error:`No se pudieron generar las etiquetas: {{msg}}`,sortBy:{label:`Ordenar:`,id:`Por ID`,color:`Por color`},templates:{amsHolderSmall:{label:`Soporte de AMS — pequeño (74 × 33 mm)`,hint:`Una etiqueta por página; coincide con la etiqueta imprimible del modelo 752566 de MakerWorld (AMS Filament Label Holder).`},amsHolderLarge:{label:`Soporte de AMS — grande (75 × 55 mm)`,hint:`Una etiqueta por página; encaja en la variante con inserto de cartulina del AMS Filament Label Holder. Lo bastante amplia para muestra de color, marca, material, ID y código QR.`},box40x30:{label:`Etiqueta de caja (40 × 30 mm)`,hint:`Una etiqueta por página; tamaño de rollo DK/Brother habitual, adecuado para etiquetas de bolsas de filamento y cajas de almacenamiento.`},box:{label:`Box label (62 × 29 mm)`,hint:`Una etiqueta por página; dimensionada para las etiquetas pequeñas de Brother PT/QL y Dymo.`},averyL7160:{label:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,hint:`Hojas de tamaño UE; 21 etiquetas por página A4.`},avery5160:{label:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,hint:`Hojas de tamaño EE. UU.; 30 etiquetas por página Letter.`}}},csv:{importButton:`Importar CSV`,exportButton:`Exportar CSV`,modalTitle:`Importar bobinas desde CSV`,selectFile:`Elige un archivo CSV o arrástralo aquí`,dragHint:`Encabezado: material (obligatorio), brand, subtype, color_name, rgba, …`,parsing:`Leyendo archivo…`,previewError:`No se pudo leer el archivo CSV`,validCount:`{{count}} válidas`,errorCount:`{{count}} con error`,skippedCount:`{{count}} omitidas`,colRow:`Fila`,colStatus:`Estado`,colColor:`Color`,colorResolved:`Color rellenado desde el catálogo`,colorCrossMaterial:`Color tomado de un material diferente — sin coincidencia exacta en el catálogo`,duplicateExisting:`Ya existe una bobina con este material, marca y color — se importará igualmente como una bobina nueva`,spoolmanHint:`En modo Spoolman, usa la importación/exportación CSV integrada de Spoolman.`,importValidRows:`Importar {{count}} filas válidas`,noValidRows:`Sin filas válidas`,importing:`Importando…`,importSuccess:`{{count}} bobinas importadas`,importError:`Error al importar`,exportError:`Error al exportar`},addSpool:`Añadir bobina`,editSpool:`Editar bobina`,copySpool:`Copiar bobina`,material:`Material`,selectMaterial:`Seleccionar material...`,subtype:`Subtipo`,brand:`Marca`,searchBrand:`Buscar marca...`,useCustomBrand:`Usar "{{brand}}"`,useCustomMaterial:`Usar material personalizado: {{material}}`,suggestedOptions:`Sugeridos`,allOptions:`Todos`,colorName:`Nombre del color`,colorNamePlaceholder:`Blanco jade, Rojo fuego...`,color:`Color`,hexColor:`Color hexadecimal`,pickColor:`Elegir color personalizado`,labelWeight:`Peso de la etiqueta`,coreWeight:`Peso de la bobina vacía`,searchSpoolWeight:`Buscar peso de la bobina...`,weightUsed:`Usado`,currentWeight:`Peso restante`,measuredWeight:`Peso medido`,spoolName:`Bobina`,costPerKg:`Coste por kg`,storageLocation:`Ubicación de almacenamiento`,temperature:`Temperatura`,humidity:`Humedad`,battery:`Batería`,storageLocationPlaceholder:`p. ej. Estante A, Cajón 1`,openInInventory:`Abrir en el inventario`,measuredWeightError:`El peso medido debe estar entre {{min}} g y {{max}} g.`,slicerFilament:`Filamento del laminador`,slicerFilamentName:`Nombre del preajuste del laminador`,slicerPreset:`Preajuste del laminador`,searchPresets:`Buscar preajustes de filamento...`,selectedPreset:`Seleccionado`,noPresetsFound:`No se encontraron preajustes`,tempOverrides:`Anulaciones de temperatura`,note:`Nota`,notePlaceholder:`Cualquier nota adicional sobre esta bobina...`,category:`Categoría`,categoryPlaceholder:`p. ej. Producción, Prototipo, Cliente A`,categoryNone:`Sin categoría`,storageLocationNone:`Sin ubicación establecida`,lowStockThresholdOverride:`Umbral de existencias bajas (esta bobina)`,lowStockThresholdOverrideHelp:`Déjelo en blanco para usar el umbral global ({{global}}%).`,clearRfid:`Borrar etiqueta RFID`,rfidCleared:`Etiqueta RFID borrada`,archive:`Archivar`,restore:`Restaurar`,noSpools:`Aún no hay bobinas. Añada su primera bobina para empezar.`,noAvailableSpools:`No hay bobinas disponibles. Añada una bobina a su inventario o desasigne una de otra ranura primero.`,kProfiles:`Perfiles K`,addKProfile:`Añadir perfil K`,assignSpool:`Asignar bobina`,unassignSpool:`Desasignar`,assignSuccess:`Bobina asignada y ranura del AMS configurada`,assignPendingInsert:`Asignada. La ranura se configurará cuando inserte la bobina.`,assignFailed:`Error al asignar la bobina`,selectSpool:`Seleccione una bobina para asignar a esta ranura`,assigned:`Asignada`,assigning:`Asignando...`,searchSpools:`Buscar bobinas...`,showAllSpools:`Mostrar todas las bobinas`,spoolmanSpools:`Bobinas de Spoolman`,allMaterials:`Todos los materiales`,filterByBrand:`Filtrar por marca...`,showArchived:`Mostrar archivadas`,quickAdd:`Añadir rápido (existencias)`,quantity:`Cantidad`,stock:`Existencias`,configured:`Configurada`,spoolsCreated:`{{count}} bobinas creadas`,spoolsPartiallyCreated:`{{created}} de {{total}} bobinas creadas (algunas fallaron)`,spoolCreated:`Bobina creada`,spoolUpdated:`Bobina actualizada`,spoolDeleted:`Bobina eliminada`,deepLinkSpoolNotFound:`Bobina no encontrada`,deepLinkFetchFailed:`No se pudo cargar la bobina — inténtelo de nuevo`,spoolArchived:`Bobina archivada`,spoolRestored:`Bobina restaurada`,kProfileSaveFailed:`No se pudieron guardar los ajustes del perfil K`,syncWeightSpoolNotFound:`Bobina no encontrada — es posible que se haya eliminado`,syncWeightSpoolmanUnreachable:`Spoolman no es accesible — inténtelo más tarde`,syncWeightFailed:`Error al sincronizar el peso`,spoolmanUnreachable:`Spoolman no es accesible — inténtelo de nuevo más tarde`,deleteSpoolNotFound:`Bobina no encontrada — es posible que ya se haya eliminado`,deleteFailed:`Error al eliminar la bobina`,archiveSpoolNotFound:`Bobina no encontrada — es posible que ya se haya eliminado`,archiveFailed:`Error al archivar la bobina`,restoreSpoolNotFound:`Bobina no encontrada — es posible que ya se haya eliminado`,restoreFailed:`Error al restaurar la bobina`,saveFailed:`Error al guardar los cambios`,tagClearFailed:`Error al borrar la etiqueta`,deleteConfirm:`¿Está seguro de que desea eliminar esta bobina? Esto no se puede deshacer.`,archiveConfirm:`¿Está seguro de que desea archivar esta bobina?`,advancedSettings:`Ajustes avanzados`,filamentInfoTab:`Información del filamento`,paProfileTab:`Perfil PA`,colorAndCostTab:`Color y coste`,printersTab:`Impresoras`,filamentInfo:`Filamento`,additional:`Adicional`,loadingPresets:`Cargando preajustes de la nube...`,cloudConnected:`Nube conectada`,cloudNotConnected:`Nube no conectada (usando los valores predeterminados)`,recentColors:`Recientes`,searchColors:`Buscar colores...`,searchResults:`Resultados de búsqueda`,allColors:`Todos los colores`,commonColors:`Colores comunes`,showLess:`Mostrar menos`,showAll:`Mostrar todos`,noColorsFound:`Ningún color coincide con su búsqueda`,noResults:`No se encontraron coincidencias`,extraColorsLabel:`Colores adicionales`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Pegue de 2 a 8 paradas hexadecimales, separadas por comas. Se muestra como un degradado.`,extraColorsInvalid:`Se ignoró el hexadecimal no válido: {{tokens}}`,colorEffectLabel:`Efecto`,colorEffect:{none:`Ninguno`,sparkle:`Destellos`,wood:`Madera`,marble:`Mármol`,glow:`Brillante en la oscuridad`,matte:`Mate`,silk:`Seda`,galaxy:`Galaxia`,rainbow:`Arcoíris`,metal:`Metal`,translucent:`Translúcido`,gradient:`Degradado`,dualColor:`Bicolor`,triColor:`Tricolor`,multicolor:`Multicolor`},selectMaterialFirst:`Seleccione primero un material en la pestaña de información del filamento.`,noPrintersConfigured:`No hay impresoras configuradas. Añada impresoras para usar perfiles PA.`,matchingFilter:`Coincidentes`,anyBrand:`Cualquier marca`,anyVariant:`Cualquier variante`,autoSelect:`Selección automática`,matches:`coincidencias`,match:`coincidencia`,noMatches:`Sin coincidencias`,connected:`Conectada`,offline:`Desconectada`,printerOffline:`La impresora está desconectada. Conéctela para ver los perfiles de calibración.`,noKProfilesMatch:`Ningún perfil K coincide con el filamento seleccionado.`,leftNozzle:`Boquilla izquierda`,rightNozzle:`Boquilla derecha`,profilesSelected:`perfil(es) de calibración seleccionado(s)`,filamentPreset:`Perfil de filamento`,presetUseSpoolDefault:`Usar el perfil de la bobina`,presetInherited:`heredado`,presetOverride:`personalizado`,presetNeedsModel:`Esta impresora aún no ha indicado su modelo, así que no puede tener su propio perfil.`,autoMatchPresets:`Asignar automáticamente`,autoMatchPresetsHint:`Buscar la variante del perfil de la bobina que nombra cada modelo`,kProfilesPerPrinter:`Perfiles K`,kProfileNotSet:`Sin definir`,kProfileFlowMismatch:`Este perfil se midió con una boquilla {{profile}} pero hay montada una {{fitted}}, así que no se aplicará`,nozzle:`Boquilla`,unknownModel:`Modelo desconocido`,onePrinter:`1 impresora`,nPrinters:`{{n}} impresoras`,filamentPresetsLoadFailed:`No se pudieron cargar los perfiles por modelo de esta bobina`,filamentPresetSaveFailed:`No se pudieron guardar los perfiles por modelo`,totalInventory:`Inventario total`,totalConsumed:`Total consumido`,byMaterial:`Por material`,inPrinter:`En la impresora`,lowStock:`Existencias bajas`,sinceTracking:`Desde que comenzó el seguimiento`,resetConsumedCounter:`Restablecer contador`,resetConsumedCounterTooltip:`Poner a cero el contador de gramos consumidos de esta bobina. El peso restante no cambia.`,resetConsumedCounterConfirm:`¿Restablecer a 0 el contador de gramos consumidos de esta bobina? Las impresiones futuras volverán a contar desde cero. La bobina en sí, su cálculo de peso restante y sus ajustes no cambian.`,resetAllConsumedCounters:`Restablecer todos los contadores`,resetAllConsumedCountersTooltip:`Poner a cero el contador de gramos consumidos de todas las bobinas. Los pesos restantes no cambian.`,resetAllConsumedCountersConfirm:`¿Restablecer a 0 el contador de gramos consumidos de las {{count}} bobinas (incluidas las archivadas)? Esto borra la estadística «Total consumido» para que las impresiones futuras cuenten desde cero. Las bobinas y los pesos restantes no cambian.`,consumedCounterReset:`Contador restablecido`,allConsumedCountersReset:`Contador restablecido para {{count}} bobina(s)`,resetConsumedCounterFailed:`Error al restablecer el contador`,loadedInAms:`Cargada en AMS/ext.`,remaining:`Restante`,weightCheck:`Comprobación de peso`,lastWeighed:`Pesada por última vez`,neverWeighed:`Nunca pesada`,search:`Buscar bobinas...`,showing:`Mostrando`,to:`a`,of:`de`,show:`Mostrar`,spools:`bobinas`,spool:`bobina`,page:`Página`,noSpoolsMatch:`No se encontraron resultados`,noSpoolsMatchDesc:`Pruebe a ajustar su búsqueda o sus filtros para encontrar lo que busca.`,active:`Activas`,archived:`Archivadas`,all:`Todas`,used:`Usada`,new:`Nueva`,clearFilters:`Borrar filtros`,table:`Tabla`,cards:`Tarjetas`,net:`Neto`,groupSimilar:`Agrupar`,groupedSpools:`{{count}} bobinas idénticas`,groupedRows:`filas`,columns:`Columnas`,configureColumns:`Configurar columnas`,configureColumnsDesc:`Arrastre para reordenar las columnas o use las flechas. Conmute la visibilidad con el icono del ojo.`,visible:`visibles`,reset:`Restablecer`,cancel:`Cancelar`,applyChanges:`Aplicar cambios`,moveUp:`Subir`,moveDown:`Bajar`,hideColumn:`Ocultar columna`,showColumn:`Mostrar columna`,linkToSpool:`Vincular a bobina`,tagLinked:`Etiqueta vinculada a la bobina`,tagLinkFailed:`Error al vincular la etiqueta`,tagAlreadyLinked:`La etiqueta ya está vinculada a la bobina #{{id}}`,unknownTag:`Se detectó una etiqueta RFID desconocida`,usageHistory:`Historial de uso`,noUsageHistory:`Aún no se ha registrado ningún uso`,printName:`Nombre de la impresión`,weightConsumed:`Peso consumido`,clearHistory:`Borrar`,historyCleared:`Historial de uso borrado`,fillSourceLabel:`(Inv.)`,lowStockThresholdError:`El umbral debe estar entre 0,1 y 99,9`,assignMismatchTitle:`Discrepancia de material`,assignMismatchMessage:`El material de la bobina seleccionada "{{spoolMaterial}}" no coincide con el material de la bandeja "{{trayMaterial}}" de {{location}}. ¿Asignar de todos modos?`,assignMismatchConfirm:`Asignar de todos modos`,assignPartialMismatchMessage:`El material de la bobina "{{spoolMaterial}}" es similar pero no coincide exactamente con "{{trayMaterial}}" en {{location}}. ¿Desea continuar?`,assignProfileMismatchMessage:`El perfil de la bobina "{{spoolProfile}}" no coincide con el perfil de la bandeja "{{trayProfile}}" en {{location}}. ¿Desea continuar?`,assignReconfigureNote:`La ranura del AMS se reconfigurará para usar el perfil de la bobina.`,spoolmanFilamentCatalog:`Catálogo de filamentos de Spoolman`,pickFromSpoolmanCatalog:`Elegir del catálogo de Spoolman…`,spoolmanFilamentSelected:`Filamento seleccionado del catálogo de Spoolman`,spoolmanFilamentUnlinked:`Vínculo del catálogo de filamentos borrado`,noSpoolmanFilaments:`No se encontraron filamentos en el catálogo de Spoolman`,spoolmanFilamentColorSwatch:`Color del filamento`,spoolWeightManagedBySpoolman:`El peso de la bobina vacía se gestiona por tipo de filamento en Spoolman`,spoolmanCatalogLoadFailed:`Error al cargar el catálogo de filamentos de Spoolman`},timelapse:{title:`Time-lapse`,create:`Crear time-lapse`,download:`Descargar`,delete:`Eliminar`,preview:`Vista previa`,frameRate:`Velocidad de fotogramas`,quality:`Calidad`,processing:`Procesando...`,noTimelapses:`No hay time-lapses disponibles`},ams:{title:`AMS`,slot:`Ranura`,empty:`Vacía`,emptySlot:`Ranura vacía`,slotEmpty:`Vacía`,slotUnconfigured:`?`,emptySlotReset:`No hay filamento asignado`,unknown:`Desconocido`,humidity:`Humedad`,temperature:`Temperatura`,filamentType:`Tipo de filamento`,filamentColor:`Color`,remaining:`Restante`,history:`Historial del AMS`,noHistory:`No hay historial disponible`,configureSlot:`Configurar ranura`,externalSpool:`Bobina externa`,profile:`Perfil`,kFactor:`Factor K`,kFactorShort:`K`,fill:`Rellenar`,configure:`Configurar`,used:`usado`,remainingUnit:`restante`},printModal:{variants:{editNote:`Estas alternativas se fijaron al poner el trabajo en cola. Cancela y vuelve a encolar para cambiarlas.`,title:`Alternativas de impresora`,help:`Un trabajo, un puesto en la cola. La primera impresora compatible que quede libre imprime su archivo.`,unknownModel:`Modelo desconocido`,plateFor:`Placa para {{filename}}`,moveUp:`Subir`,moveDown:`Bajar`,queued:`En cola con {{count}} alternativas`},selectPrinter:`Seleccionar impresora`,selectPlate:`Seleccionar cama`,filamentMapping:`Mapeo de filamentos`,useArchiveMapping:`Mapeo`,useArchiveMappingTooltip:`Selecciona todas las ranuras a partir del mapeo de AMS guardado con este archivo (del slicer), en lugar de emparejar por tipo/color.`,clickToChangeSlot:`Haga clic para cambiar la asignación de ranura`,reRead:`Releer`,plateN:`Cama {{n}}`,plateFilamentsUnreadable:`No se han podido leer los filamentos de una cama seleccionada, por lo que no se puede asignar. Deselecciónala para encolar las demás.`,totalCost:`Coste total:`,slotRemainingShort:` - quedan {{grams}} g`,printSettings:`Ajustes de impresión`,bedLeveling:`Nivelación de la cama`,flowCalibration:`Calibración del flujo`,vibrationCalibration:`Calibración de vibración`,layerInspection:`Inspección de la primera capa`,timelapse:`Time-lapse`,cancel:`Cancelar`,noPrintersAvailable:`No hay impresoras disponibles`,printerBusy:`La impresora está ocupada`,printerOffline:`La impresora está desconectada`,sameTypeDifferentColor:`Mismo tipo, color distinto`,filamentTypeNotLoaded:`Tipo de filamento no cargado`,statusReady:`Listo`,statusColorMismatch:`Color distinto`,statusTypeNotFound:`Tipo no encontrado`,requiredTooltip:`Requerido: {{name}} - {{color}}`,manuallySelected:`Seleccionado manualmente`,autoMatched:`Emparejado automáticamente`,selectSlot:`Elegir ranura`,exactColorMatch:`Coincidencia exacta de color`,slotForFilament:`Ranura de impresora para {{name}}`,overrideForFilament:`Anulación de filamento para {{name}}`,sameTypeDifferentColorDetail:`Mismo tipo, color distinto: necesita {{required}}, la ranura tiene {{loaded}}`,requiredTypeNotInPrinter:`El tipo de filamento requerido no se encuentra en la impresora.`,whenToPrint:`Cuándo imprimir`,asap:`Lo antes posible`,queue:`Cola`,schedule:`Programar`,dateTime:`Fecha y hora`,invalidDateTime:`Introduzca una fecha y hora válidas`,openCalendar:`Abrir calendario`,requireManualStart:`Requerir inicio manual`,requirePreviousSuccess:`Iniciar solo si la impresión anterior se completó correctamente`,autoOffAfter:`Apagar la impresora al terminar`,helpAsap:`La impresión se añadirá al principio de la cola y comenzará en cuanto haya una impresora elegible inactiva.`,helpSchedule:`La impresión comenzará a la hora programada si la impresora está inactiva. Si está ocupada, esperará hasta que esté disponible.`,helpQueue:`La impresión se añadirá al final de la cola.`,leftNozzle:`I`,rightNozzle:`D`,leftNozzleTooltip:`Boquilla izquierda`,rightNozzleTooltip:`Boquilla derecha`,ftsSameInletHint:`Todos los filamentos de esta impresión están en el conmutador de ruta de filamento IN-{{inlet}}. Cambiar entre filamentos de la misma entrada es más lento: mueve uno a un AMS de la otra entrada.`,rackPosition:`Posición del carro`,rackPositionTooltip:`Qué boquilla del carro imprime este filamento. Las posiciones se numeran como en la impresora.`,rackEmptyPosition:`Esta posición del carro está vacía`,rackWrongNozzle:`Tiene una boquilla {{has}}; este filamento necesita {{needs}}`,filamentOverride:`Anulación de filamento`,filamentOverrideHint:`Anule opcionalmente los filamentos para la asignación basada en el modelo. El planificador comparará con los filamentos que ha seleccionado en lugar de los valores originales del 3MF.`,originalFilament:`Original`,overrideWith:`Anular con`,resetToOriginal:`Restablecer al original`,insufficientFilamentTitle:`No hay suficiente filamento`,waitingForAmsStatus:`Esperando el estado del AMS de {{printer}}…`,insufficientFilamentMessage:`Algunas bobinas asignadas tienen menos filamento restante del que necesita esta impresión:`,insufficientFilamentLine:`{{printer}} - {{slot}}: necesita {{required}} g, restante {{remaining}} g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: necesita {{required}} g, {{remaining}} g disponibles entre bobinas equivalentes (AMS Filament Backup)`,printAnyway:`Imprimir de todos modos`,forceColorMatch:`Forzar la coincidencia de color`,staggerPrinterStarts:`Escalonar los inicios de las impresoras`,staggerGroupSize:`Tamaño de grupo`,staggerInterval:`Intervalo (min)`,staggerPreview:`{{printers}} impresoras → {{groups}} grupos de {{size}}, iniciando cada {{interval}} min`,staggerLastGroup:`último grupo: {{count}}`,staggerTotal:`total: {{minutes}} min`,staggerToPrinters:`Escalonar en {{count}} impresoras`,gcodeInjection:`Inyectar G-code de impresión automática`,insufficientBudget:`Presupuesto insuficiente`,unlimitedNoBudget:`Ilimitado: no se ha establecido ningún límite de presupuesto.`,noPrintableCostCenters:`No hay ningún centro de costes activo disponible para imprimir. Pide a un administrador que te conceda acceso de impresión.`},backup:{includesEncryptionKey:`Las copias de seguridad locales incluyen el archivo de clave de cifrado de MFA (DATA_DIR/.mfa_encryption_key) para que un ZIP de copia de seguridad sea autónomo. Trate el ZIP como información sensible — cualquiera que tenga el archivo puede descifrar los secretos de cliente de OIDC y los secretos TOTP que contiene.`,title:`Copia de seguridad y restauración`,createBackup:`Crear copia de seguridad`,restoreBackup:`Restaurar copia de seguridad`,restoreDescription:`Reemplazar todos los datos desde un archivo de copia de seguridad`,downloadBackup:`Descargar copia de seguridad`,uploadBackup:`Subir copia de seguridad`,lastBackup:`Última copia de seguridad`,autoBackup:`Copia de seguridad automática`,backupNow:`Hacer copia de seguridad ahora`,restoreWarning:`Advertencia: restaurar una copia de seguridad sobrescribirá todos los datos actuales.`,includeArchives:`Incluir archivos`,includeSettings:`Incluir ajustes`,includeProfiles:`Incluir perfiles`,backupSuccess:`Copia de seguridad creada correctamente`,restoreSuccess:`Copia de seguridad restaurada correctamente`,backupFailed:`Error en la copia de seguridad`,restoreFailed:`Error en la restauración`,restoreNote:`La impresora virtual se detendrá durante la restauración`,githubBackup:`Copia de seguridad en Git`,enabled:`Activada`,cloudLoginRequired:`Se requiere iniciar sesión en Bambu Cloud. Inicie sesión en Perfiles → Perfiles en la nube para activar la copia de seguridad en GitHub.`,cloudLoginRequiredShort:`Se requiere iniciar sesión en la nube`,githubDescription:`Sincronice automáticamente sus perfiles con un repositorio privado de GitHub para la copia de seguridad y el historial de versiones.`,repoIsPrivate:`El repositorio es privado — es seguro hacer copias de seguridad en él.`,repoIsPublicWarning:`El repositorio es PÚBLICO. Las copias de seguridad de Bambuddy incluyen credenciales de MQTT, tokens de Home Assistant, tokens de Prometheus, su correo de Bambu Cloud y los códigos de acceso de las impresoras mediante los perfiles K. El guardado está bloqueado hasta que haga el repositorio privado en los ajustes de su proveedor.`,repoVisibilityUnknown:`No se pudo determinar la visibilidad del repositorio. Bambuddy se niega a hacer copias de seguridad en cualquier cosa que no se confirme como privada; el guardado se bloqueará.`,repositoryUrl:`URL del repositorio`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Permitir HTTP no seguro`,allowInsecureHttpHint:`Actívelo para instancias autoalojadas en redes privadas sin TLS`,personalAccessToken:`Token de acceso personal`,tokenSaved:`(guardado)`,enterNewToken:`Introduzca un nuevo token para actualizar`,tokenHintGitHub:`Token de granularidad fina con acceso de lectura y escritura a Contents, o token clásico con el ámbito repo.`,tokenHintGitLab:`Token con el ámbito api, o read_repository junto con write_repository.`,tokenHintGitea:`Token con el ámbito write:repository.`,tokenHintForgejo:`Token con el ámbito write:repository. Basta con un token limitado a este único repositorio.`,branch:`Rama`,provider:`Proveedor de Git`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Solo manual`,hourly:`Cada hora`,daily:`Diaria`,weekly:`Semanal`,includeInBackup:`Incluir en la copia de seguridad`,kProfiles:`Perfiles K`,kProfilesDescription:`Calibración de avance de presión de las impresoras conectadas`,noPrintersConnected:`No hay impresoras conectadas`,printersConnected:`{{connected}}/{{total}} conectadas`,cloudProfiles:`Perfiles en la nube`,cloudProfilesDescription:`Preajustes de filamento, impresora y proceso de Bambu Cloud y Orca Cloud`,cloudProfilesAccounts:`Cuentas conectadas — Bambu Cloud: {{bambu}}, Orca Cloud: {{orca}}`,appSettings:`Ajustes de la aplicación`,appSettingsDescription:`Configuración de Bambuddy (base de datos completa)`,spoolInventory:`Inventario de bobinas`,spoolInventoryDescription:`Bobinas de filamento, historial de uso y seguimiento de costes`,printArchives:`Archivos de impresión`,printArchivesDescription:`Metadatos del historial de impresión (sin archivos gcode/3MF)`,lastBackupAt:`Última copia de seguridad:`,noBackupsYet:`Aún no hay copias de seguridad`,next:`Siguiente:`,startingBackup:`Iniciando la copia de seguridad...`,test:`Probar`,enableBackup:`Activar la copia de seguridad`,testConnection:`Probar conexión`,enterRepoUrl:`Introduzca la URL del repositorio`,enterRepoAndToken:`Introduzca la URL del repositorio y el token de acceso`,repoRequired:`La URL del repositorio es obligatoria`,tokenRequired:`El token de acceso es obligatorio`,githubBackupEnabled:`Copia de seguridad en GitHub activada`,tokenUpdated:`Token actualizado`,settingsSaved:`Ajustes guardados`,failedToSave:`Error al guardar: {{message}}`,backupCompleteFiles:`Copia de seguridad completada - {{count}} archivos actualizados`,backupSkippedNoChanges:`Copia de seguridad omitida - sin cambios`,backupFailed2:`Error en la copia de seguridad: {{message}}`,clearedLogs:`Se borraron {{count}} registros`,failedToClearLogs:`Error al borrar los registros: {{message}}`,restoreFromGit:{button:`Restaurar desde Git`,title:`Restaurar desde copia de Git`,subtitle:`Elige un commit y qué se debe restaurar`,commitLabel:`Commit de la copia`,latestCommit:`Última copia (punta de la rama)`,categoriesLabel:`Qué restaurar`,inspecting:`Leyendo el contenido de la copia...`,itemCount:`{{count}} en la copia`,overwriteLabel:`Sobrescribir entradas existentes`,overwriteOn:`Las entradas existentes se actualizarán desde la copia.`,overwriteOff:`Solo se añaden las entradas que falten; las existentes no se modifican.`,selectedCount:`{{count}} seleccionados`,restoring:`Restaurando...`,confirmTitle:`¿Restaurar desde la copia?`,confirmMessage:`Las categorías seleccionadas se restaurarán desde este commit. Se añaden las entradas que falten y las existentes se mantienen igual.`,confirmMessageOverwrite:`Las categorías seleccionadas se restaurarán desde este commit y se sobrescribirán las entradas que ya existan localmente. Esto no se puede deshacer.`,kprofilesOverwriteCaveat:`Los perfiles K son la excepción: escribir una ranura siempre reemplaza la calibración en la impresora.`,tally:`{{restored}} restaurados, {{skipped}} omitidos, {{failed}} fallidos`,reloadHint:`Recarga Bambuddy para que los datos restaurados aparezcan en todas partes.`,partialHint:`Las categorías indicadas arriba se completaron y están guardadas. Las que faltan no llegaron a ejecutarse.`,failed:`La restauración ha fallado.`,loadFailed:`No se pudo leer el repositorio de copias de seguridad.`,details:{notPresent:`No está presente en este commit de la copia`,unreadableJson:`JSON ilegible: {{paths}}`,settingsNoPayload:`No hay ajustes en los datos`,settingsCredentialsWillSkip:`Se omitirán {{count}} claves con aspecto de credencial`,settingsCompanionWillSkip:`Se omitirán {{count}} claves con aspecto de credencial y {{companion}} interruptores que dependen de ellas quedarán desactivados`,settingsCompanionOnlyWillSkip:`{{companion}} interruptores quedarán desactivados - la credencial que necesita cada uno no se puede restaurar desde una copia de seguridad`,spoolsUsageCount:`incluidos {{count}} registros de consumo`,archivesMetadataOnly:`Solo metadatos - los archivos 3MF y las miniaturas no están en una copia de Git`,kprofilesPrinterCount:`en {{count}} impresoras`},notes:{noData:`No hay datos de este tipo en esta copia de seguridad`,archivesPrinterMissing:`Algunos archivos hacían referencia a impresoras que ya no existen - enlace eliminado`,archivesProjectMissing:`Algunos archivos hacían referencia a proyectos que ya no existen - enlace eliminado`,archivesOwnerCleared:`Algunos archivos hacían referencia a usuarios que ya no existen - se ha borrado el propietario, por lo que solo son visibles para usuarios con el permiso archives:read_all hasta que un administrador los reasigne`,archivesOwnerUnmatched:`Algunos archivos indican un propietario que no existe en esta instancia - se ha borrado el propietario en lugar de deducirlo del id de usuario de la copia de seguridad, por lo que solo son visibles para usuarios con el permiso archives:read_all hasta que un administrador los reasigne`,archivesOwnerUnknown:`Algunos archivos se restauraron sin propietario - esta copia de seguridad no registra ninguno, por lo que solo son visibles para usuarios con el permiso archives:read_all hasta que un administrador los reasigne`,archivesUndeleted:`Los archivos eliminados desde la copia vuelven a estar visibles - la sobrescritura estaba activada`,archivesMetadataOnly:`Los archivos restaurados solo contienen metadatos - los ficheros 3MF y las miniaturas no están en una copia de Git`,spoolUsageUnresolved:`{{count}} registros de consumo omitidos - su bobina no está en la lista de bobinas de esta copia, así que no hay nada a lo que asociarlos.`,spoolUsageUnlinked:`{{count}} registros de consumo restaurados sin su enlace al historial de impresión - selecciona Archivos de impresión junto con Inventario de bobinas para conservarlo.`,spoolTagKept:`{{count}} etiquetas de bobina se han dejado como estaban - la copia habría borrado una etiqueta escaneada desde entonces, o la habría movido a una segunda bobina.`,settingsCredentialsSkipped:`{{count}} claves con aspecto de credencial omitidas - vuelve a introducir los secretos manualmente`,settingsAuthSkipped:`{{count}} ajustes de autenticación omitidos - cámbialos en Ajustes > Autenticación para que sigan aplicándose las comprobaciones de bloqueo`,settingsCompanionSkipped:`{{keys}} se han dejado desactivados - la credencial que cada uno necesita no puede restaurarse desde una copia y esta instancia no tiene ninguna guardada, así que activarlos dejaría la integración sin autenticación`,settingsMqttRelayFailed:`Ajustes MQTT restaurados, pero no se pudo reconectar el relé - reinicia Bambuddy`,kprofilesAlwaysOverwrite:`Los perfiles K siempre sobrescriben la ranura correspondiente en la impresora`,kprofilesAckUnreliable:`Una impresora que no responde sigue contando como restaurada - verifica los perfiles en la impresora`,kprofilesPrinterMissing:`No hay ninguna impresora con el número de serie {{serial}} - omitido`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) no está conectada - omitido`,kprofilesUnknownNozzle:`Diámetro de boquilla inesperado {{nozzle}} para {{serial}} - enviado tal cual`,kprofilesUnmatched:`{{count}} perfiles para {{nozzle}} no tenían equivalente en {{printer}} - añadidos como perfiles nuevos`,kprofilesSendFailed:`No se pudieron enviar los perfiles de {{nozzle}} a {{printer}} ({{serial}})`,kprofilesRefused:`{{printer}} ({{serial}}) rechazó los perfiles de {{nozzle}}: {{reason}}`,kprofilesStepFailed:`No se pudo completar el paso de los perfiles K - {{reason}}. Lo que se restauró antes sigue guardado.`}},history:`Historial`,clear:`Borrar`,date:`Fecha`,status:`Estado`,trigger:`Tipo`,triggers:{manual:`Copia (manual)`,scheduled:`Copia (programada)`,restore:`Restauración`},commit:`Confirmación`,localBackup:`Copia de seguridad local`,localBackupDescription:`Cree una copia de seguridad completa de sus datos de Bambuddy, incluida la base de datos, los archivos, las subidas y todos los archivos.`,downloadBackupLabel:`Descargar copia de seguridad`,completeBackupZip:`Copia de seguridad completa: base de datos + todos los archivos (ZIP)`,download:`Descargar`,preparingBackup:`Preparando la copia de seguridad...`,creatingArchive:`Creando el archivo de copia de seguridad... Esto puede tardar un rato para archivos grandes.`,downloadingFile:`Descargando el archivo de copia de seguridad...`,backupDownloaded:`Copia de seguridad descargada correctamente`,failedToCreateBackup:`Error al crear la copia de seguridad: {{message}}`,restore:`Restaurar`,restoreReplacesAll:`La restauración reemplaza todos los datos.`,restoreReplacesAllDetail:`Su base de datos y archivos actuales se reemplazarán por completo. Se requiere un reinicio tras la restauración.`,restoreConfirmTitle:`Restaurar copia de seguridad`,restoreConfirmMessage:`¿Está seguro de que desea restaurar desde "{{filename}}"? Esto reemplazará por completo su base de datos actual y todos los archivos. La aplicación deberá reiniciarse tras la restauración.`,restoreConfirmButton:`Restaurar copia de seguridad`,uploadingFile:`Subiendo el archivo de copia de seguridad...`,backupRestoredRestart:`Copia de seguridad restaurada. Reinicie Bambuddy.`,failedToRestore:`Error al restaurar la copia de seguridad. Compruebe el formato del archivo.`,reloadNow:`Recargar ahora`,creatingBackup:`Creando copia de seguridad`,restoringBackup:`Restaurando copia de seguridad`,preparing:`Preparando...`,processing:`Procesando...`,doNotClosePage:`No cierre esta página ni navegue a otra. Esta operación puede tardar varios minutos para copias de seguridad grandes.`,restoring:`Restaurando...`,restoreComplete:`Restauración completada`,restoreFailed2:`Error en la restauración`,importSettings:`Importar ajustes desde un archivo de copia de seguridad`,pleaseWaitRestoring:`Espere mientras se restauran sus datos`,selectBackupFile:`Haga clic para seleccionar el archivo de copia de seguridad (.json o .zip)`,duplicateHandling:`Cómo funciona la gestión de duplicados:`,matchPrinters:`Impresoras`,matchPrintersBy:`coincidencia por número de serie`,matchSmartPlugs:`Enchufes inteligentes`,matchSmartPlugsBy:`coincidencia por dirección IP`,matchNotificationProviders:`Proveedores de notificaciones`,matchNotificationProvidersBy:`coincidencia por nombre`,matchFilaments:`Filamentos`,matchFilamentsBy:`coincidencia por nombre + tipo + marca`,matchArchives:`Archivos`,matchArchivesBy:`coincidencia por hash del contenido (siempre se omiten)`,matchPendingUploads:`Subidas pendientes`,matchPendingUploadsBy:`coincidencia por nombre de archivo`,matchSettingsTemplates:`Ajustes y plantillas`,matchSettingsTemplatesBy:`siempre se sobrescriben`,replaceExisting:`Reemplazar los datos existentes`,keepExisting:`Conservar los datos existentes`,overwriteDescription:`Sobrescribir los elementos que ya existen con los datos de la copia de seguridad`,keepDescription:`Restaurar solo los elementos que aún no existen`,overwriteCaution:`Precaución:`,overwriteWarning:`Sobrescribir reemplazará sus configuraciones actuales con los datos de la copia de seguridad. Los códigos de acceso de las impresoras nunca se sobrescriben por seguridad.`,cancel:`Cancelar`,processingBackup:`Procesando el archivo de copia de seguridad...`,itemsRestored:`Elementos restaurados`,itemsSkipped:`Elementos omitidos`,restored:`Restaurados`,skippedAlreadyExist:`Omitidos (ya existen)`,filesCategory:`Archivos (3MF, miniaturas, etc.)`,andMore:`...y {{count}} más`,newApiKeysGenerated:`Nuevas claves API generadas`,keysShownOnce:`Estas claves solo se muestran una vez. ¡Cópielas ahora!`,copy:`Copiar`,noDataFound:`No se encontraron datos para restaurar en el archivo de copia de seguridad.`,close:`Cerrar`,scheduledBackup:`Copias de seguridad programadas`,scheduledBackupDescription:`Cree automáticamente instantáneas de copia de seguridad según una programación. El directorio de salida se puede montar en un NAS o en almacenamiento externo.`,frequency:`Frecuencia`,backupTime:`Hora`,retention:`Retención`,retentionDescription:`Número de copias de seguridad que conservar`,outputPath:`Ruta de salida`,outputPathPlaceholder:`Predeterminada: {{path}}`,outputPathDescription:`Déjelo vacío para la ubicación predeterminada`,runNow:`Ejecutar ahora`,backupFiles:`Archivos de copia de seguridad`,noScheduledBackups:`Aún no hay copias de seguridad`,deleteBackup:`Eliminar`,deleteBackupConfirm:`¿Eliminar este archivo de copia de seguridad?`,backupRunning:`Copia de seguridad en curso...`,scheduledBackupComplete:`Copia de seguridad completada correctamente`,scheduledBackupFailed:`Error en la copia de seguridad`,nextBackup:`Próxima copia de seguridad`,backupSize:`Tamaño`,localTimeHint:`Hora local ({{tz}})`,defaultPathLabel:`Predeterminada:`,pathCheck:{title:`Bambuddy no puede escribir en este directorio`,howToFix:`Cómo solucionarlo:`,sandboxed:`El servicio de Bambuddy no puede escribir en {{path}}. Su unidad de systemd se ejecuta con ProtectSystem=strict, lo que hace que todo directorio fuera de los de instalación, datos y registros sea de solo lectura para el servicio, incluso uno en el que usted sí puede escribir desde su propia shell.`,read_only:`{{path}} está en un sistema de archivos de solo lectura.`,permission_denied:`Bambuddy no tiene permiso para escribir en {{path}}. Compruebe el propietario y los permisos del directorio.`,no_space:`El sistema de archivos que contiene {{path}} está lleno.`,not_a_directory:`{{path}} existe pero no es un directorio.`,missing:`{{path}} no existe y no se pudo crear.`,error:`Bambuddy no puede escribir en {{path}}.`,ephemeralTitle:`Estas copias de seguridad no sobrevivirán a la recreación del contenedor`,container_ephemeral:`{{path}} está dentro del contenedor de Bambuddy, no en el host. Las copias escritas ahí se pierden cuando se recrea el contenedor. Monte el directorio desde el host:`},categories:{settings:`Ajustes`,notification_providers:`Proveedores de notificaciones`,notification_templates:`Plantillas de notificaciones`,smart_plugs:`Enchufes inteligentes`,printers:`Impresoras`,filaments:`Filamentos`,maintenance_types:`Tipos de mantenimiento`,archives:`Archivos`,projects:`Proyectos`,pending_uploads:`Subidas pendientes`,external_links:`Enlaces externos`,api_keys:`Claves API`}},tags:{title:`Etiquetas`,addTag:`Añadir etiqueta`,editTag:`Editar etiqueta`,deleteTag:`Eliminar etiqueta`,tagName:`Nombre de la etiqueta`,tagColor:`Color de la etiqueta`,noTags:`No hay etiquetas`,deleteConfirm:`¿Está seguro de que desea eliminar esta etiqueta?`,manageTags:`Gestionar etiquetas`},uploadModal:{title:`Subir archivos 3MF`,dragDrop:`Arrastre y suelte archivos .3mf aquí`,or:`o`,browseFiles:`Examinar archivos`,extractionInfo:`El modelo de impresora se extraerá automáticamente de los metadatos del archivo 3MF.`,uploaded:`subidos`,failed:`fallidos`,uploading:`Subiendo...`,upload:`Subir`,uploadFailed:`Error al subir`},editArchive:{title:`Editar archivo`,name:`Nombre`,namePlaceholder:`Nombre de la impresión`,printer:`Impresora`,noPrinter:`Sin impresora`,project:`Proyecto`,noProject:`Sin proyecto`,itemsPrinted:`Elementos impresos`,itemsPrintedHelp:`Número de elementos producidos en este trabajo de impresión. Use 0 si toda la placa se estropeó.`,filamentUsed:`Filamento usado (g)`,filamentUsedPlaceholder:`p. ej. 46.16`,filamentUsedHelp:`Introdúcelo a mano cuando una impresión se haya archivado sin su 3MF, para que siga contando en los totales de filamento. Al volver a escanear un archivo que sí tiene su 3MF, el valor se lee de nuevo del fichero.`,notes:`Notas`,notesPlaceholder:`Añada notas sobre esta impresión...`,externalLink:`Enlace externo`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Enlace a Printables, Thingiverse u otra fuente`,tags:`Etiquetas`,tagsPlaceholder:`Añada etiquetas...`,addMoreTags:`Añada más etiquetas...`,matchingTags:`Coincidentes con "{{query}}"`,existingTags:`Etiquetas existentes`,clickToAdd:`(haga clic para añadir)`,status:`Estado`,failureReason:`Motivo del fallo`,selectReason:`Seleccionar motivo...`,photos:`Fotos del resultado impreso`,photosHelp:`Haga clic en + para añadir fotos de su resultado impreso`,printResult:`Resultado de la impresión`,saving:`Guardando...`,failureReasons:{adhesionFailure:`Fallo de adhesión`,spaghettiDetached:`Espagueti / Desprendido`,layerShift:`Desplazamiento de capa`,cloggedNozzle:`Boquilla obstruida`,filamentRunout:`Agotamiento del filamento`,warping:`Alabeo`,stringing:`Hilos`,underExtrusion:`Subextrusión`,powerFailure:`Corte de corriente`,userCancelled:`Cancelada por el usuario`,noStatusUpdate:`No se recibió actualización de estado`,other:`Otro`},statuses:{completed:`Completada`,failed:`Fallida`,aborted:`Cancelada`,printing:`Imprimiendo`}},kProfiles:{title:`Perfiles K`,noPrintersConfigured:`No hay impresoras configuradas`,addPrinterInSettings:`Añada una impresora en Ajustes para gestionar perfiles K`,noActivePrinters:`No hay impresoras activas`,enablePrinterConnection:`Active la conexión de una impresora para ver sus perfiles K`,loadingProfiles:`Cargando perfiles K...`,printerOffline:`Impresora desconectada`,printerOfflineDesc:`La impresora seleccionada no está conectada. Enciéndala para ver los perfiles K.`,noMatchingProfiles:`No hay perfiles coincidentes`,noMatchingProfilesDesc:`Ningún perfil coincide con sus criterios de búsqueda`,noKProfiles:`No hay perfiles K`,noKProfilesDesc:`No se encontraron perfiles de avance de presión para la boquilla de {{diameter}} mm`,createFirstProfile:`Crear el primer perfil`,printer:`Impresora`,nozzle:`Boquilla`,refresh:`Actualizar`,addProfile:`Añadir perfil`,export:`Exportar`,import:`Importar`,select:`Seleccionar`,selectAll:`Seleccionar todo`,delete:`Eliminar`,searchPlaceholder:`Buscar por nombre o filamento...`,allExtruders:`Todos los extrusores`,leftOnly:`Solo izquierdo`,rightOnly:`Solo derecho`,allFlow:`Todos los flujos`,hfOnly:`Solo flujo alto`,sOnly:`Solo estándar`,sortName:`Ordenar: nombre`,sortKValue:`Ordenar: valor K`,sortFilament:`Ordenar: filamento`,leftExtruder:`Extrusor izquierdo`,rightExtruder:`Extrusor derecho`,modal:{addTitle:`Añadir perfil K`,editTitle:`Editar perfil K`,profileName:`Nombre del perfil`,profileNamePlaceholder:`Mi perfil de PLA`,kValue:`Valor K`,kValuePlaceholder:`0,020`,kValueHelp:`Rango típico: 0,01 - 0,06 para PLA, 0,02 - 0,10 para PETG`,filament:`Filamento`,selectFilament:`Seleccionar filamento...`,source:{local:`Importado`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Integrado`},noFilamentsHelp:`No hay filamentos disponibles. Inicia sesión en Bambu Cloud o importa ajustes en Perfiles → Perfiles locales.`,searchFilaments:`Buscar filamentos...`,noFilamentMatches:`Ningún filamento coincide con esa búsqueda`,flowType:`Tipo de flujo`,highFlow:`Flujo alto`,standard:`Estándar`,nozzleSize:`Tamaño de la boquilla`,extruder:`Extrusor`,extruders:`Extrusores`,left:`Izquierdo`,right:`Derecho`,notes:`Notas (almacenadas localmente)`,notesPlaceholder:`Añada notas sobre este perfil...`,notesHelp:`Las notas se guardan en Bambuddy, no en la impresora`,syncing:`Sincronizando con la impresora...`,savingExtruder:`Guardando en el extrusor {{current}}/{{total}}...`,pleaseWait:`Espere`},deleteConfirm:{title:`Eliminar perfil`,cannotUndo:`Esto no se puede deshacer`,message:`¿Está seguro de que desea eliminar "{{name}}" de la impresora?`},bulkDelete:{title:`Eliminar perfiles`,cannotUndo:`Esto no se puede deshacer`,message:`¿Está seguro de que desea eliminar {{count}} perfiles seleccionados de la impresora?`},toast:{profileSaved:`Perfil K guardado`,profilesSaved:`Perfil K guardado en {{count}} extrusores`,selectAtLeastOneExtruder:`Seleccione al menos un extrusor`,selectFilament:`Selecciona primero un filamento`,filamentNotResolvable:`No hay ID de filamento Bambu para {{name}}: la impresora no puede guardar un perfil`,profileDeleted:`Perfil K eliminado`,profilesDeleted:`Se eliminaron {{count}} perfiles`,exportedProfiles:`Se exportaron {{count}} perfiles`,importedProfiles:`Se importaron {{count}} de {{total}} perfiles`,noProfilesToExport:`No hay perfiles que exportar`,invalidFileFormat:`Formato de archivo no válido`,failedToParseImport:`Error al analizar el archivo de importación`,failedToSaveBatch:`Error al guardar los perfiles K`,noteSaved:`Nota guardada`,failedToSaveNote:`Error al guardar la nota`},permission:{noRead:`No tiene permiso para actualizar perfiles`,noCreate:`No tiene permiso para añadir perfiles`,noUpdate:`No tiene permiso para actualizar perfiles K`,noDelete:`No tiene permiso para eliminar perfiles K`,noExport:`No tiene permiso para exportar perfiles`,noImport:`No tiene permiso para importar perfiles`}},virtualPrinter:{title:`Impresora virtual`,running:`En ejecución`,stopped:`Detenida`,description:{default:`Active una impresora virtual que aparece en Bambu Studio y OrcaSlicer. Los archivos enviados a esta impresora se archivarán directamente sin imprimir.`,proxy:`Active un proxy que retransmite el tráfico del laminador a una impresora real, permitiendo la impresión remota a través de cualquier red.`},enable:{title:`Activar la impresora virtual`,visibleInSlicer:`Visible como "Bambuddy" en la detección del laminador`,proxyingTo:`Haciendo de proxy hacia {{name}}`,notActive:`No activa`},model:{title:`Modelo de impresora`,description:`Seleccione qué modelo de impresora emular.`,restartWarning:`Cambiar el modelo reiniciará la impresora virtual`},accessCode:{title:`Código de acceso`,isSet:`El código de acceso está establecido`,notSet:`No hay código de acceso establecido - necesario para activarla`,placeholder:`Introduzca un código de 8 caracteres`,placeholderChange:`Introduzca un nuevo código para cambiarlo`,hint:`Debe tener exactamente 8 caracteres. Los laminadores lo usan para autenticarse.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Heredado de la impresora de destino`,derivedFromTargetHint:`Usa el código de acceso de la impresora de destino. El puente reenvía la autenticación del laminador a la impresora real, por lo que los códigos deben coincidir — edita el código en los ajustes de la impresora para cambiarlo.`,reveal:`Mostrar código de acceso`,hide:`Ocultar código de acceso`},targetPrinter:{title:`Impresora de destino`,configured:`Destino del proxy configurado`,notConfigured:`No hay impresora de destino seleccionada - necesaria para el modo proxy`,placeholder:`Seleccionar una impresora...`,hint:`Seleccione la impresora a la que retransmitir el tráfico del laminador. La impresora debe estar en modo LAN.`,noPrinters:`No hay impresoras configuradas. Añada primero una impresora para usar el modo proxy.`},remoteInterface:{title:`Anulación de la interfaz de red`,configured:`Anulación de la interfaz activa`,optional:`Opcional - úsela si la IP detectada automáticamente es incorrecta (p. ej. varias tarjetas de red, Docker, VPN)`,placeholder:`Detección automática (predeterminada)...`,hint:`Anula la dirección IP anunciada mediante SSDP y usada en el certificado TLS. Útil cuando Bambuddy tiene varias interfaces de red.`},mode:{title:`Modo`,archive:`Archivar`,archiveDesc:`Archivar los archivos inmediatamente`,review:`Revisar`,reviewDesc:`Revisar antes de archivar`,queue:`Encolar`,queueDesc:`Archivar y añadir a la cola`,proxy:`Proxy`,proxyDesc:`Retransmitir a una impresora real`},autoDispatch:{title:`Envío automático`,description:`Iniciar automáticamente las impresiones al añadirlas a la cola. Cuando está desactivado, las impresiones esperan al envío manual.`},queueForceColorMatch:{title:`Forzar la coincidencia de color`,description:`Negarse a enviar a una impresora que no tiene cargados el tipo y el color exactos de filamento. Desactivado de forma predeterminada — sin esto, la cola usa la coincidencia solo por modelo y puede elegir una impresora con el color equivocado cargado.`},saveAmsMapping:{title:`Guardar mapeo de AMS`,description:`Guarda en el archivo la selección de ranura AMS propia del slicer (del comando MQTT project_file), de modo que una reimpresión posterior reutilice el mismo carrete físico en lugar de volver a derivarlo del tipo/color del archivo. Desactivado de forma predeterminada.`},gcodeInjection:{title:`Inyección de G-code`,description:`Aplica los fragmentos de G-code configurados por modelo en Ajustes a los trabajos de esta IV. Desactivado de forma predeterminada.`},tailscaleDisabled:{title:`Integración con Tailscale`,description:`Actívelo para marcar esta IV como expuesta a través de Tailscale. Muestra la dirección de Tailscale del host para que sepa qué IP pegar en el laminador. El paso de importación de la CA no cambia — este interruptor no tiene ningún efecto sobre los certificados.`},setupRequired:{title:`Configuración necesaria`,description:`La función de impresora virtual requiere configuración adicional del sistema antes de funcionar. Esto incluye el reenvío de puertos, las reglas del cortafuegos y los ajustes específicos de la plataforma.`,readGuide:`Lea la guía de configuración antes de activarla`},archiveNameSource:{title:`Origen del nombre del archivo`,description:`Elija cómo se nombran los archivos nuevos cuando llegan a través de la impresora virtual. «Metadatos» usa el título incrustado por el laminador del 3MF (predeterminado). «Nombre de archivo» usa el nombre de archivo que Bambu Studio envió por FTP. Nota: Bambu Studio sobrescribe el nombre que escribe en el diálogo «enviar a la impresora» con el campo Título del 3MF cuando existe, por lo que ambos modos suelen producir la misma cadena.`,metadata:`Metadatos`,filename:`Nombre de archivo`},caCert:{title:`Certificado del laminador`,description:`Las impresoras virtuales usan un certificado TLS firmado por la CA de Bambuddy. Importe este certificado de CA en el almacén de confianza de su laminador una sola vez para que acepte la conexión — sin necesidad de copiarlo desde la línea de comandos.`,copy:`Copiar`,copied:`Copiado`,download:`Descargar`,fingerprint:`SHA-256`},howItWorks:{title:`Cómo funciona`,step1:`En la misma LAN, las impresoras virtuales aparecen automáticamente en su laminador (Bambu Studio / OrcaSlicer) mediante detección. Desde otras redes, añádalas manualmente por dirección IP y código de acceso.`,step2:`En los modos Archivar, Revisar y Encolar, use el botón «Enviar» de su laminador para subir archivos 3MF a Bambuddy. El laminador mostrará «Impresión correcta» — el archivo se almacena, no se imprime.`,step3:`En el modo Proxy, la impresora virtual retransmite todo el tráfico a una impresora real — las impresiones comienzan inmediatamente como si estuviera conectada directamente.`},status:{title:`Detalles del estado`,printerName:`Nombre de la impresora`,model:`Modelo`,serialNumber:`Número de serie`,mode:`Modo`,pendingFiles:`Archivos pendientes`,targetPrinter:`Impresora de destino`,ftpPort:`Puerto FTP`,mqttPort:`Puerto MQTT`,ftpConnections:`Conexiones FTP`,mqttConnections:`Conexiones MQTT`},toast:{updated:`Ajustes de la impresora virtual actualizados`,failedToUpdate:`Error al actualizar los ajustes`,copyFailed:`Error al copiar — pruebe a seleccionar el texto manualmente`,accessCodeRequired:`Establezca primero un código de acceso`,targetPrinterRequired:`Seleccione primero una impresora de destino`,bindIpRequired:`Establezca primero una IP de enlace`,accessCodeEmpty:`El código de acceso no puede estar vacío`,accessCodeLength:`El código de acceso debe tener exactamente 8 caracteres`,targetCodeChangedRebind:`El código de acceso ahora coincide con la nueva impresora de destino. Vuelve a añadir este dispositivo en tu laminador para usar el nuevo código.`,created:`Impresora virtual creada`,failedToCreate:`Error al crear la impresora virtual`,deleted:`Impresora virtual eliminada`,failedToDelete:`Error al eliminar la impresora virtual`},list:{title:`Impresoras virtuales`,add:`Añadir`,addFirst:`Añadir impresora virtual`,empty:`No hay impresoras virtuales configuradas. Añada una para empezar.`},bindIp:{title:`Interfaz de enlace`,placeholder:`Seleccionar interfaz...`,hint:`Interfaz de red a la que se enlaza esta impresora virtual. Debe ser única por impresora.`},proxy:{accessCodeHint:`En el modo proxy, use el código de acceso de su impresora de destino en el laminador. La conexión se reenvía de forma transparente a la impresora real.`},addDialog:{title:`Añadir impresora virtual`,name:`Nombre`,hint:`Puede configurar el código de acceso, la impresora de destino y otros ajustes después de crearla.`,create:`Crear`},deleteConfirm:{title:`Eliminar impresora virtual`,message:`¿Está seguro de que desea eliminar "{{name}}"? Esto detendrá todos los servicios de esta impresora.`}},modelViewer:{openInSlicer:`Abrir en el laminador`,openInSlicerWith:`Abrir en {{slicer}}`,moreSlicerOptions:`Más opciones de laminador`,openInSlicerFailed:`No se pudo abrir en el laminador`,tabs:{model:`Modelo 3D`},notAvailable:`no disponible`,plates:`Camas`,allPlates:`Todas las camas`,plateNumber:`Cama {{number}}`,plateCount:`{{count}} cama`,plateCount_other:`{{count}} camas`,objectCount:`{{count}} objeto`,objectCount_other:`{{count}} objetos`,filamentCount:`{{count}} filamento`,filamentCount_other:`{{count}} filamentos`,eta:`Tiempo estimado {{minutes}} min`,noPreview:`No hay vista previa disponible para este archivo`,pagination:{pageOf:`Página {{current}} de {{total}}`,prev:`Anterior`,next:`Siguiente`},errors:{failedToLoad:`Error al cargar el archivo`,noMeshes:`No se encontraron mallas en el archivo 3MF`,unsupportedFormat:`Formato de archivo no compatible`}},maintenanceDescriptions:{lubricateCarbonRods:`Aplique lubricante a las varillas de carbono para un movimiento suave`,lubricateRails:`Aplique lubricante a las guías lineales para un movimiento suave`,cleanNozzle:`Limpie el fusor y la boquilla para evitar obstrucciones`,checkBelts:`Verifique la tensión de las correas para impresiones precisas`,cleanBuildPlate:`Limpie la cama de impresión para una mejor adhesión`,checkExtruder:`Inspeccione los engranajes del extrusor en busca de desgaste`,checkCooling:`Asegúrese de que los ventiladores de refrigeración funcionan correctamente`,generalInspection:`Inspección general de la impresora`,cleanCarbonRods:`Limpie las varillas de carbono para reducir la fricción`,lubricateSteelRods:`Aplique lubricante a las varillas de acero para un movimiento suave`,cleanSteelRods:`Limpie las varillas de acero para reducir la fricción`,cleanLinearRails:`Limpie las guías lineales para eliminar el polvo y los residuos`,checkPtfeTube:`Inspeccione el tubo de PTFE en busca de desgaste o daños`,replaceHepaFilter:`Reemplace el filtro HEPA para la calidad del aire`,replaceCarbonFilter:`Reemplace el filtro de carbón activado`,lubricateLeftNozzleRail:`Lubrique la guía de la boquilla izquierda (serie H2)`},haSensors:{label:`Sensores`,unavailable:`No disponible`,blocksPrints:`{{entity}} — retiene las impresiones mientras haya alerta`,states:{open:`Abierto`,closed:`Cerrado`,unlocked:`Desbloqueado`,locked:`Bloqueado`,detected:`Detectado`,clear:`Despejado`,wet:`Húmedo`,dry:`Seco`,problem:`Problema`,ok:`OK`,running:`En marcha`,stopped:`Detenido`,on:`Encendido`,off:`Apagado`},sectionTitle:`Sensores de Home Assistant (impresoras)`,add:`Añadir sensor`,addTitle:`Añadir sensor de Home Assistant`,editTitle:`Editar sensor de Home Assistant`,empty:`Aún no hay sensores. Vincula un contacto de puerta o un termómetro de Home Assistant para mostrarlo en la tarjeta de la impresora.`,unknownPrinter:`Impresora desconocida`,badgeBlocks:`Retiene impresiones`,badgeNotifies:`Notifica`,badgeHidden:`Oculto en la tarjeta`,printer:`Impresora`,entity:`Entidad`,searchPlaceholder:`Buscar entidades...`,noEntities:`No hay entidades coincidentes`,name:`Nombre visible`,alertWhen:`Alertar cuando`,alertNever:`Nunca — solo mostrar`,alertAbove:`Por encima de`,alertBelow:`Por debajo de`,alertHint:`El estado de alerta resalta el sensor en la tarjeta de la impresora y habilita las opciones de abajo.`,showOnCard:`Mostrar en la tarjeta de la impresora`,notifyOnAlert:`Enviar una notificación cuando empiece la alerta`,blockPrint:`Retener las impresiones en cola mientras haya alerta`,blockPrintHint:`Los trabajos siguen en cola y arrancan solos cuando el sensor se despeja. Se ignora mientras Home Assistant no esté accesible.`,toast:{created:`Sensor añadido`,updated:`Sensor guardado`,deleted:`Sensor eliminado`},error:{pickEntity:`Elige una entidad de Home Assistant`,nameRequired:`Introduce un nombre visible`,printerRequired:`Elige una impresora`,alertRequired:`Define primero una condición de alerta`}},locationHaSensors:{sectionTitle:`Sensores de Home Assistant (ubicaciones de almacenamiento)`,sectionDescription:`Vincule sensores de temperatura, humedad o batería de Home Assistant a sus ubicaciones de almacenamiento para mostrar lecturas en vivo en la tarjeta de filamento y en la tabla. Solo se permite un sensor por categoría y ubicación.`,add:`Añadir sensor`,addTitle:`Añadir sensor de Home Assistant`,editTitle:`Editar sensor de Home Assistant`,empty:`Aún no hay sensores. Vincula un sensor de temperatura o humedad de Home Assistant para mostrarlo en la tarjeta del filamento.`,unknownLocation:`Ubicación desconocida`,location:`Ubicación de almacenamiento`,showOnCard:`Mostrar en la tarjeta del filamento`,overwriteConfirm:{title:`¿Reemplazar el sensor existente?`,messageTemperature:`"{{location}}" ya tiene un sensor de temperatura vinculado: {{name}}. Si continúas, se reemplazará.`,messageHumidity:`"{{location}}" ya tiene un sensor de humedad vinculado: {{name}}. Si continúas, se reemplazará.`,messageBattery:`"{{location}}" ya tiene un sensor de batería vinculado: {{name}}. Si continúas, se reemplazará.`},autoAdd:{confirmTitle:`¿Añadir también los otros sensores?`,confirmMessage:`Bambuddy también encontró otros sensores para esta ubicación. Elige cuáles añadir también.`,added:`También añadido: {{names}}`,noneFound:`No se encontraron sensores de temperatura, humedad o batería coincidentes para esta ubicación.`,onlyThisOne:`Solo este`},options:{buttonLabel:`Opciones de sensores`,title:`Opciones de sensores de ubicación`,description:`Estos valores se usan cuando un sensor de temperatura, humedad o batería se vincula automáticamente junto con el primer sensor de una ubicación.`,generalSettings:`Ajustes generales`,pollInterval:`Intervalo de actualización (segundos)`,pollIntervalHint:`Con qué frecuencia Bambuddy consulta Home Assistant y actualiza los valores de los sensores en pantalla. Mínimo 60 segundos.`,colorizeValues:`Colorear los valores de los sensores según sus umbrales de alerta`,aboveColor:`Color al superar el umbral`,belowColor:`Color al estar por debajo del umbral`,optimalColor:`Color para el valor óptimo`,colors:{red:`Rojo`,orange:`Naranja`,yellow:`Amarillo`,green:`Verde`,blue:`Azul`,purple:`Morado`,pink:`Rosa`},saved:`Opciones guardadas`,saveFailed:`No se pudieron guardar las opciones`,reset:`Restablecer`,resetConfirm:{title:`¿Restablecer todos los sensores de ubicación existentes?`,message:`Esto sobrescribe los umbrales de alerta, las notificaciones y la visibilidad en la tarjeta de todos los sensores de temperatura, humedad y batería de ubicaciones existentes con los valores configurados arriba, y restaura el nombre de cada sensor a su nombre descriptivo de Home Assistant; los sensores de impresora no se ven afectados. Esto no se puede deshacer. Dependiendo de cuántos sensores tenga, esto puede tardar un momento.`},resetDone:`Aplicado a {{count}} sensores de ubicación`,resetFailed:`No se pudieron restablecer los sensores de ubicación`},deleteAllConfirm:{title:`¿Eliminar todos los sensores?`,message:`Esto elimina los {{count}} sensores vinculados a "{{location}}". Esta acción no se puede deshacer.`},currentlyBound:`Actualmente vinculado: {{entity}}`,error:{locationRequired:`Elige una ubicación de almacenamiento`},toast:{created:`Sensor añadido`,updated:`Sensor guardado`,deleted:`Sensor eliminado`}},smartPlugs:{offline:`Desconectado`,admin:`Administración`,openPlugAdminPage:`Abrir la página de administración del enchufe`,deleteSmartPlug:`Eliminar enchufe inteligente`,turnOnSmartPlug:`Encender el enchufe inteligente`,turnOffSmartPlug:`Apagar el enchufe inteligente`,turnOn:`Encender`,turnOff:`Apagar`,addSmartPlug:{scanningNetwork:`Escaneando la red...`,chooseEntity:`Elija una entidad...`,connectionFailed:`Error de conexión`,searchEntities:`Buscar entidades...`,searchPowerSensors:`Buscar sensores de potencia...`,searchEnergySensors:`Buscar sensores de energía...`,placeholders:{plugName:`Enchufe del salón`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Igual que el tema de potencia, o distinto`}},linkedTo:`Vinculado a:`,monitorOnly:`Solo supervisión`,alerts:`Alertas`,scheduleOn:`Encendido a las {{time}}`,scheduleOff:`Apagado a las {{time}}`,on:`Encendido`,off:`Apagado`,power:`Potencia`,kwhToday:`kWh hoy`,settings:`Ajustes`,automationSettings:`Ajustes de automatización`,showInSwitchbar:`Mostrar en la barra de interruptores`,quickAccessSidebar:`Acceso rápido desde la barra lateral`,enabled:`Activada`,enableAutomation:`Activar la automatización para este enchufe`,autoOn:`Encendido automático`,autoOnDescription:`Encender cuando comienza la impresión`,autoOff:`Apagado automático`,autoOffDescription:`Apagar cuando se completa la impresión (una sola vez)`,autoOffPersistent:`Mantener activado`,autoOffPersistentDescription:`Permanecer activado entre impresiones en lugar de una sola vez`,controlsPrinterPower:`Alimenta la impresora`,controlsPrinterPowerDescription:`Desactívalo si este enchufe solo alimenta un accesorio (ventilador de filtro, luces). De lo contrario, apagarlo marca la impresora como desconectada.`,autoOffAfterDrying:`Apagado automático tras el secado`,autoOffAfterDryingDescription:`Apagar cuando se completa el secado del AMS`,delayAfterDryingMinutes:`Retardo de secado (minutos)`,turnOffDelayMode:`Modo de retardo de apagado`,time:`Tiempo`,temp:`Temp.`,delayMinutes:`Retardo (minutos)`,tempThreshold:`Umbral de temperatura (°C)`,tempThresholdDescription:`Se apaga cuando la boquilla se enfría por debajo de esta temperatura`,edit:`Editar`,deleteConfirm:`¿Está seguro de que desea eliminar "{{name}}"? Esto no se puede deshacer.`,turnOnConfirm:`¿Está seguro de que desea encender "{{name}}"?`,turnOffConfirm:`¿Está seguro de que desea apagar "{{name}}"? Esto cortará la corriente al dispositivo conectado.`,failedToTurn:`Error al {{action}} "{{name}}"`,unknown:`Desconocido`,addTitle:`Añadir enchufe inteligente`,editTitle:`Editar enchufe inteligente`,stopScanning:`Detener escaneo`,discoverTasmota:`Detectar dispositivos Tasmota`,foundDevices:`Se encontraron {{count}} dispositivo(s) - haga clic para seleccionar:`,noDevicesFound:`No se encontraron dispositivos Tasmota en su red`,haNotConfigured:`Home Assistant no está configurado. Configúrelo en`,haSettingsPath:`Ajustes → Red → Home Assistant`,selectEntity:`Seleccionar entidad *`,ipAddress:`Dirección IP *`,nameLabel:`Nombre *`,username:`Nombre de usuario`,password:`Contraseña`,authHint:`Déjelo vacío si su dispositivo Tasmota no requiere autenticación`,linkToPrinter:`Vincular a una impresora`,noPrinter:`Sin impresora (solo control manual)`,linkingDescription:`La vinculación activa el encendido/apagado automático cuando las impresiones comienzan/terminan`,powerAlerts:`Alertas de potencia`,alertAbove:`Alertar si supera (W)`,alertBelow:`Alertar si está por debajo (W)`,alertDescription:`Reciba una notificación cuando el consumo de energía cruce estos umbrales. Déjelo vacío para desactivar esa dirección.`,dailySchedule:`Programación diaria`,turnOnAt:`Encender a las`,turnOffAt:`Apagar a las`,scheduleDescription:`Encender/apagar automáticamente el enchufe a estas horas cada día. Déjelo vacío para omitir esa acción.`,showOnPrinterCard:`Mostrar en la tarjeta de la impresora`,displayOnPrinterCard:`Mostrar el botón en la tarjeta de la impresora`,connectedResult:`¡Conectado!`,deviceLabel:`Dispositivo: {{name}} - `,stateLabel:`Estado: {{state}}`,test:`Probar`,delete:`Eliminar`,save:`Guardar`,add:`Añadir`,cancel:`Cancelar`,failedToStartScan:`Error al iniciar el escaneo`,nameRequired:`El nombre es obligatorio`,entityRequired:`La entidad es obligatoria para los enchufes de Home Assistant`,mqttTopicRequired:`Debe configurarse al menos un tema MQTT para la supervisión de potencia, energía o estado`,loadingEntities:`Cargando entidades...`,loading:`Cargando...`,failedToLoadEntities:`Error al cargar las entidades: {{error}}`,noEntitiesMatching:`No se encontraron entidades que coincidan con "{{search}}"`,noEntitiesAvailable:`No hay entidades disponibles`,searchingEntities:`Buscando en todas las entidades ({{count}} encontradas)`,showingEntities:`Mostrando switch, light, input_boolean ({{count}} disponibles)`,energyMonitoringOptional:`Supervisión de energía (opcional)`,energyMonitoringHint:`Busque y seleccione sensores que proporcionen datos de potencia/energía.`,powerSensorW:`Sensor de potencia (W)`,energyTodayKwh:`Energía de hoy (kWh)`,totalEnergyKwh:`Energía total (kWh)`,noMatchingSensors:`No hay sensores coincidentes`,none:`Ninguno`,mqttNotConfigured:`El broker MQTT no está configurado. Establezca la dirección del broker en`,mqttSettingsPath:`Ajustes → Red → Publicación MQTT`,mqttNotConfiguredSuffix:`(no necesita activar la publicación, solo rellenar los datos del broker).`,mqttMonitorOnlyDescription:`Los enchufes MQTT reciben los datos de potencia/energía mediante una suscripción MQTT. El control de encendido/apagado no está disponible - use su broker MQTT o sistema de domótica.`,powerMonitoring:`Supervisión de potencia`,energyMonitoring:`Supervisión de energía`,stateMonitoring:`Supervisión de estado`,optional:`opcional`,topic:`Tema`,jsonPath:`Ruta JSON`,multiplier:`Multiplicador`,onValue:`Valor de ON`,mqttPowerHint:`La ruta JSON extrae el valor de la carga útil JSON (p. ej., "power_l1"). Déjelo vacío si el tema publica valores numéricos sin procesar.
 Use el multiplicador 0,001 para mW→W, 1000 para kW→W.`,mqttEnergyHint:`La ruta JSON extrae el valor de la carga útil JSON. Déjelo vacío para valores sin procesar.
 Use el multiplicador 0,001 para Wh→kWh, 1000 para MWh→kWh.`,mqttStateHint:`La ruta JSON extrae el valor de la carga útil JSON. Déjelo vacío para valores sin procesar.
-Valor de ON: la cadena exacta que significa «ON». Déjelo vacío para la detección automática (ON, true, 1).`,restControl:`Control`,restOnUrl:`URL de encendido`,restOffUrl:`URL de apagado`,restOnBody:`Cuerpo de la solicitud de encendido`,restOffBody:`Cuerpo de la solicitud de apagado`,restMethod:`Método HTTP`,restHeaders:`Cabeceras personalizadas (JSON)`,restStatusUrl:`URL de estado`,restStatusPath:`Ruta JSON del estado`,restStatusOnValue:`Valor de ON`,restPowerUrl:`URL de potencia`,restPowerPath:`Ruta JSON de la potencia`,restPowerMultiplier:`Multiplicador de potencia`,restEnergyUrl:`URL de energía`,restEnergyPath:`Ruta JSON de energía (hoy)`,restEnergyTotalPath:`Ruta JSON de energía (contador total)`,restEnergyTotalMultiplier:`Multiplicador del contador total`,restEnergyTotalPathHint:`p. ej. aenergy.total`,restEnergyTotalHint:`Muchos enchufes — todos los Shelly entre ellos — solo informan de un contador acumulado que nunca se reinicia. Va aquí, no en el campo de arriba: leído como el consumo de hoy nunca se pondría a cero a medianoche, y Ayer y Total seguirían vacíos. Bambuddy deduce Hoy y Ayer a partir de él, lo que requiere uno o dos días de lecturas. Un Shelly informa en vatios-hora, así que usa un multiplicador de 0.001.`,restEnergyMultiplier:`Multiplicador de energía`,restUrlRequired:`Se requiere al menos una URL (de encendido o apagado) para los enchufes REST`,restHeadersHint:`p. ej. {"Authorization": "Bearer your-token"}`,restBodyHint:`p. ej. ON, {"state": "on"}`,restStatusHint:`URL para sondear el estado actual`,restPathHint:`p. ej. state o data.power.status`,restPowerUrlHint:`URL independiente para los datos de potencia (usa la URL de estado si está vacía)`,restEnergyUrlHint:`URL independiente para los datos de energía (usa la URL de estado si está vacía)`,restEnergyHint:`Cada valor puede usar su propia URL o recurrir a la URL de estado. Use multiplicadores para la conversión de unidades (p. ej. 0,001 para convertir Wh en kWh).`,testConnection:`Probar conexión`,connectionSuccess:`Conexión correcta`,noSwitchesInSwitchbar:`No hay interruptores en la barra de interruptores`,enableSwitchbarHint:`Active «Mostrar en la barra de interruptores» en Ajustes > Enchufes inteligentes`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`Correo`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`Notificaciones por correo SMTP`,telegram:`Notificaciones mediante un bot de Telegram`,discord:`Enviar a un canal de Discord mediante un webhook`,ntfy:`Notificaciones push gratuitas y autoalojables`,pushover:`Notificaciones push sencillas y fiables`,callmebot:`Notificaciones de WhatsApp gratuitas mediante CallMeBot`,webhook:`POST HTTP genérico a cualquier URL`,homeassistant:`Notificaciones persistentes en el panel de Home Assistant`,bark:`Notificaciones push de iOS mediante Bark (autoalojable)`},lastSuccess:`Última: {{date}}`,error:`Error`,printer:`Impresora:`,allPrinters:`Todas las impresoras`,sendTestNotification:`Enviar notificación de prueba`,eventSettings:`Ajustes de eventos`,enabled:`Activado`,sendFromProvider:`Enviar notificaciones desde este proveedor`,printEvents:`Eventos de impresión`,printerStatus:`Estado de la impresora`,amsAlarms:`Alarmas del AMS`,amsHtAlarms:`Alarmas del AMS-HT`,printQueue:`Cola de impresión`,start:`Inicio`,plateCheck:`Comprobación de cama`,complete:`Completada`,failed:`Fallida`,stopped:`Detenida`,progress:`Progreso`,offline:`Desconectada`,lowFilament:`Filamento bajo`,maintenance:`Mantenimiento`,amsHumidity:`Humedad del AMS`,amsTemp:`Temp. del AMS`,amsDryingSuspended:`Secado suspendido`,amsHtHumidity:`Humedad del AMS-HT`,amsHtTemp:`Temp. del AMS-HT`,bedCooled:`Cama enfriada`,firstLayer:`Primera capa`,quiet:`Silencio`,digest:`Resumen {{time}}`,printStarted:`Impresión iniciada`,plateNotEmpty:`Cama no vacía`,plateNotEmptyDescription:`Objetos detectados antes de la impresión`,plateClearRequired:`Confirmar cama libre`,plateClearRequiredDescription:`Impresión terminada, la cola espera confirmación`,plateClear:`Cama libre`,printCompleted:`Impresión completada`,bedCooledLabel:`Cama enfriada`,bedCooledDescription:`La cama se enfrió por debajo del umbral tras la impresión`,firstLayerCompleteLabel:`Primera capa completada`,firstLayerCompleteDescription:`Notificar con una captura cuando termina la primera capa`,missingSpoolAssignmentLabel:`Falta la asignación de bobina`,billingChargeFailedLabel:`Error de facturación`,billingChargeFailedDescription:`Notificar cuando no se puedan registrar los costes de impresión`,missingSpoolAssignmentDescription:`Notificar cuando la impresión comienza y las bandejas necesarias no tienen ninguna bobina asignada`,printFailed:`Impresión fallida`,printStopped:`Impresión detenida`,progressMilestones:`Hitos de progreso`,progressMilestonesDescription:`Notificar al 25%, 50% y 75%`,printerOffline:`Impresora desconectada`,printerError:`Error de la impresora`,aiFailureDetection:`Detección de fallos por IA`,aiFailureDetectionDescription:`Notificar cuando la IA de Obico detecte un posible fallo de impresión`,lowFilamentLabel:`Filamento bajo`,maintenanceDue:`Mantenimiento pendiente`,maintenanceDueDescription:`Notificar cuando se necesite mantenimiento`,amsHumidityHigh:`Humedad alta del AMS`,amsHumidityHighDescription:`La humedad del AMS normal supera el umbral`,amsTemperatureHigh:`Temperatura alta del AMS`,amsTemperatureHighDescription:`La temperatura del AMS normal supera el umbral`,amsDryingSuspendedTitle:`Secado automático suspendido`,amsDryingSuspendedDescription:`El secado automático se rindió con una unidad AMS porque la humedad nunca bajó del umbral`,amsHtHumidityHigh:`Humedad alta del AMS-HT`,amsHtHumidityHighDescription:`La humedad del AMS-HT supera el umbral`,amsHtTemperatureHigh:`Temperatura alta del AMS-HT`,amsHtTemperatureHighDescription:`La temperatura del AMS-HT supera el umbral`,inventoryAlerts:`Alertas de inventario`,stockReorderAlert:`Alerta de reabastecimiento`,stockReorderAlertDescription:`El SKU ha alcanzado su punto de reabastecimiento`,stockBreakAlert:`Alerta de rotura de existencias`,stockBreakAlertDescription:`Las existencias se agotarán antes de que llegue el reabastecimiento`,jobAdded:`Trabajo añadido`,jobAddedDescription:`Trabajo añadido a la cola`,jobAssigned:`Trabajo asignado`,jobAssignedDescription:`Trabajo basado en el modelo asignado a una impresora`,jobStarted:`Trabajo iniciado`,jobStartedDescription:`El trabajo de la cola empezó a imprimirse`,jobWaiting:`Trabajo en espera`,jobWaitingDescription:`Trabajo a la espera de filamento o impresora`,jobSkipped:`Trabajo omitido`,jobSkippedDescription:`Trabajo omitido (el anterior falló)`,jobFailed:`Trabajo fallido`,jobFailedDescription:`El trabajo no pudo iniciarse`,queueComplete:`Cola completada`,queueCompleteDescription:`Todos los trabajos de la cola han terminado`,quietHours:`Horas de silencio`,noNotificationsDuring:`No hay notificaciones durante estas horas`,editProviderToChangeQuietHours:`Edite el proveedor para cambiar las horas de silencio`,dailyDigest:`Resumen diario`,batchNotifications:`Agrupar las notificaciones en un único resumen diario`,sendAt:`Enviar a las {{time}}`,editProviderToChangeDigestTime:`Edite el proveedor para cambiar la hora del resumen`,edit:`Editar`,deleteProvider:`Eliminar proveedor de notificaciones`,deleteConfirm:`¿Está seguro de que desea eliminar "{{name}}"? Esto no se puede deshacer.`,delete:`Eliminar`,addTitle:`Añadir proveedor de notificaciones`,editTitle:`Editar proveedor de notificaciones`,nameLabel:`Nombre *`,namePlaceholder:`Mis notificaciones`,providerTypeLabel:`Tipo de proveedor *`,configuration:`Configuración`,testConfiguration:`Probar configuración`,printerFilter:`Filtro de impresora`,onlyFromPrinter:`Enviar notificaciones solo para los eventos de esta impresora`,quietHoursDnd:`Horas de silencio (no molestar)`,quietStart:`Inicio`,quietEnd:`Fin`,dailyDigestLabel:`Resumen diario`,sendDigestAt:`Enviar el resumen a las`,digestCollected:`Los eventos se recopilarán y se enviarán como un único resumen a esta hora`,notificationEvents:`Eventos de notificación`,progressPercent:`(25%, 50%, 75%)`,bedCooledAfterPrint:`(después de completar la impresión)`,haSensorAlert:`Alerta de sensor de impresora`,haSensorAlertDescription:`(un sensor de Home Assistant vinculado requiere atención)`,locationHaSensorAlert:`Alerta de sensor de ubicación`,locationHaSensorAlertDescription:`(un sensor de Home Assistant vinculado a una ubicación de almacenamiento requiere atención)`,eventPriority:{sectionTitle:`Prioridad de ntfy`,helpNtfy:`Elija una prioridad para cada evento activado. ntfy las usa para escalar las alertas (sonido, visibilidad, comportamiento de las notificaciones push). Los niveles no establecidos aquí usan el valor predeterminado del servidor ntfy.`,min:`Mínima`,low:`Baja`,default:`Predeterminada`,high:`Alta`,urgent:`Urgente`},cancel:`Cancelar`,save:`Guardar`,add:`Añadir`,nameRequired:`El nombre es obligatorio`,fieldRequired:`{{field}} es obligatorio`,haDataInvalid:`El campo Data debe ser un objeto JSON válido, p. ej. {"priority": "high", "ttl": 0}`,phoneNumber:`Número de teléfono`,apiKey:`Clave API`,serverUrl:`URL del servidor`,topic:`Tema`,authToken:`Token de autenticación`,userKey:`Clave de usuario`,appToken:`Token de la aplicación`,priority:`Prioridad`,pushoverRetry:`Reintento de emergencia (s)`,pushoverExpire:`Expiración de emergencia (s)`,botToken:`Token del bot`,chatId:`ID del chat`,telegramThreadId:`ID del tema del foro`,telegramThreadIdHelp:`Opcional. Envía a un único tema de un grupo de foro: el último número del enlace del tema (t.me/c/.../25). Déjalo vacío para el tema General.`,telegramThreadIdInvalid:`El ID del tema del foro debe ser un número.`,smtpServer:`Servidor SMTP`,smtpPort:`Puerto SMTP`,security:`Seguridad`,authentication:`Autenticación`,username:`Nombre de usuario`,password:`Contraseña`,fromEmail:`Correo del remitente`,toEmail:`Correo del destinatario`,webhookUrl:`URL del webhook`,payloadFormat:`Formato de la carga útil`,authorization:`Autorización`,titleFieldName:`Nombre del campo del título`,messageFieldName:`Nombre del campo del mensaje`,editTemplate:`Editar plantilla: {{name}}`,titleLabel:`Título`,bodyLabel:`Cuerpo`,titlePlaceholder:`Título de la notificación...`,bodyPlaceholder:`Cuerpo de la notificación...`,availableVariables:`Variables disponibles`,clickToInsert:`Haga clic para insertar en la posición del cursor en el cuerpo`,livePreview:`Vista previa en directo`,hide:`Ocultar`,show:`Mostrar`,loadingPreview:`Cargando la vista previa...`,enterTemplateContent:`Introduzca el contenido de la plantilla para ver la vista previa`,titlePreview:`Título:`,bodyPreview:`Cuerpo:`,resetToDefault:`Restablecer al valor predeterminado`,titleRequired:`El título es obligatorio`,bodyRequired:`El cuerpo es obligatorio`,notificationLog:`Registro de notificaciones`,showFailedOnly:`Solo fallidas`,last24Hours:`Últimas 24 horas`,last7Days:`Últimos 7 días`,last30Days:`Últimos 30 días`,last90Days:`Últimos 90 días`,justNow:`Ahora mismo`,noFailedNotifications:`No hay notificaciones fallidas`,noNotificationsLogged:`No hay notificaciones registradas`,unknownProvider:`Proveedor desconocido`,logTitle:`Título`,logMessage:`Mensaje`,logError:`Error`,logProvider:`Proveedor: {{type}}`,logTime:`Hora: {{time}}`,refresh:`Actualizar`,clearOld:`Borrar antiguas`,statsSummary:`Últimos {{days}} días:`,statsNotifications:`notificaciones`,statsSent:`{{count}} enviadas`,statsFailed:`{{count}} fallidas`,eventTypes:{print_start:`Impresión iniciada`,print_complete:`Impresión completada`,print_failed:`Impresión fallida`,print_stopped:`Impresión detenida`,print_progress:`Progreso`,printer_offline:`Impresora desconectada`,printer_error:`Error de la impresora`,filament_low:`Filamento bajo`,maintenance_due:`Mantenimiento pendiente`,test:`Prueba`},userEmail:{title:`Notificaciones`,emailNotifications:`Notificaciones por correo`,emailNotificationsDesc:`Reciba notificaciones por correo de sus propios trabajos de impresión. Los correos se envían usando los ajustes de SMTP del sistema configurados en la autenticación avanzada.`,sendingTo:`Las notificaciones se enviarán a`,noEmailWarning:`Su cuenta no tiene una dirección de correo. Póngase en contacto con un administrador para añadir una.`,printJobNotifications:`Notificaciones de trabajos de impresión`,printJobNotificationsDesc:`Elija qué eventos activan las notificaciones por correo para los trabajos de impresión que envíe.`,printJobStarts:`El trabajo de impresión comienza`,printJobStartsDesc:`Reciba una notificación cuando su trabajo de impresión comience.`,printJobFinishes:`El trabajo de impresión termina`,printJobFinishesDesc:`Reciba una notificación cuando su trabajo de impresión se complete correctamente.`,printErrors:`Errores de impresión`,printErrorsDesc:`Reciba una notificación cuando su trabajo de impresión falle o encuentre un error.`,printJobStops:`El trabajo de impresión se detiene`,printJobStopsDesc:`Reciba una notificación cuando su trabajo de impresión se cancele o se detenga.`,saveSuccess:`Preferencias de notificación guardadas.`,saveError:`Error al guardar las preferencias de notificación.`}},richTextEditor:{bold:`Negrita`,italic:`Cursiva`,underline:`Subrayado`,bulletList:`Lista con viñetas`,numberedList:`Lista numerada`,alignLeft:`Alinear a la izquierda`,alignCenter:`Centrar`,alignRight:`Alinear a la derecha`,addLink:`Añadir enlace`,removeLink:`Quitar enlace`},externalLinks:{title:`Enlaces de la barra lateral`,sidebarLayout:`Barra lateral`,sidebarLayoutDescription:`Muestra u oculta páginas integradas, añade enlaces externos y arrastra elementos para reordenar la navegación lateral.`,systemPages:`Páginas de Bambuddy`,externalLinks:`Enlaces externos`,visibleInSidebar:`Visible en la barra lateral`,hiddenFromSidebar:`Oculto en la barra lateral`,requiredInSidebar:`Obligatorio en la barra lateral`,hidePage:`Ocultar página`,showPage:`Mostrar página`,settingsCannotBeHidden:`Ajustes no se puede ocultar`,noLinksConfigured:`No hay enlaces externos configurados`,deleteLink:`Eliminar enlace`,removeCustomIcon:`Quitar el icono personalizado`,openInNewTab:`Abrir en una pestaña nueva`,placeholders:{linkName:`Mi enlace`}},keyboardShortcuts:{title:`Atajos de teclado`,navigation:`Navegación`,archivesSection:`Archivos`,kProfilesSection:`Perfiles K`,generalSection:`General`,shortcuts:{goToPrinters:`Ir a Impresoras`,goToArchives:`Ir a Archivos`,goToQueue:`Ir a la cola`,goToStats:`Ir a Estadísticas`,goToProfiles:`Ir a Perfiles en la nube`,goToSettings:`Ir a Ajustes`,focusSearch:`Enfocar la búsqueda`,openUploadModal:`Abrir la ventana de subida`,clearSelection:`Borrar la selección / quitar el foco del campo`,contextMenu:`Menú contextual en las tarjetas`,refreshProfiles:`Actualizar perfiles`,newProfile:`Nuevo perfil`,exitSelectionMode:`Salir del modo de selección`,showHelp:`Mostrar esta ayuda`},footer:`Pulse Esc o haga clic fuera para cerrar`},notificationLog:{title:`Registro de notificaciones`,events:{printStarted:`Impresión iniciada`,printComplete:`Impresión completada`,printFailed:`Impresión fallida`,printStopped:`Impresión detenida`,progress:`Progreso`,printerOffline:`Impresora desconectada`,printerError:`Error de la impresora`,lowFilament:`Filamento bajo`,maintenanceDue:`Mantenimiento pendiente`,test:`Prueba`},timeAgo:{justNow:`Ahora mismo`,minutesAgo:`hace {{minutes}} min`,hoursAgo:`hace {{hours}} h`}},restoreBackup:{title:`Restaurar copia de seguridad`,restoring:`Restaurando...`,restoreComplete:`Restauración completada`,restoreFailed:`Error en la restauración`,importSettings:`Importar ajustes desde un archivo de copia de seguridad`,pleaseWait:`Espere mientras se restauran sus datos`,clickToSelect:`Haga clic para seleccionar el archivo de copia de seguridad (.json o .zip)`,howDuplicateHandling:`Cómo funciona la gestión de duplicados:`,categories:{printers:`Impresoras`,smartPlugs:`Enchufes inteligentes`,notificationProviders:`Proveedores de notificaciones`,filaments:`Filamentos`,archives:`Archivos`,pendingUploads:`Subidas pendientes`,settingsTemplates:`Ajustes y plantillas`},matchingInfo:{printers:`coincidencia por número de serie`,smartPlugs:`coincidencia por dirección IP`,notificationProviders:`coincidencia por nombre`,filaments:`coincidencia por nombre + tipo + marca`,archives:`coincidencia por hash del contenido`,pendingUploads:`coincidencia por nombre de archivo`,settingsTemplates:`siempre se sobrescriben`},replaceExisting:`Reemplazar los datos existentes`,keepExisting:`Conservar los datos existentes`,replaceDescription:`Sobrescribir los elementos que ya existen con los datos de la copia de seguridad`,keepDescription:`Restaurar solo los elementos que aún no existen`,caution:`Precaución:`,cautionText:`Sobrescribir reemplazará sus configuraciones actuales con los datos de la copia de seguridad. Los códigos de acceso de las impresoras nunca se sobrescriben por seguridad.`,itemsRestored:`Elementos restaurados`,itemsSkipped:`Elementos omitidos`,restored:`Restaurados`,skipped:`Omitidos (ya existen)`,filesLabel:`Archivos (3MF, miniaturas, etc.)`,newApiKeysGenerated:`Nuevas claves API generadas`,newApiKeysWarning:`Estas claves solo se muestran una vez. ¡Cópielas ahora!`,processingBackup:`Procesando el archivo de copia de seguridad...`,noDataFound:`No se encontraron datos para restaurar en el archivo de copia de seguridad.`,failedToRestore:`Error al restaurar la copia de seguridad. Compruebe el formato del archivo.`},backupExport:{title:`Exportar copia de seguridad`,selectData:`Seleccione los datos que incluir`,selectAll:`Seleccionar todo`,selectNone:`No seleccionar nada`,categoryDescriptions:{settings:`Idioma, tema, preferencias de actualización`,notifications:`ntfy, Pushover, Discord, etc.`,templates:`Plantillas de mensajes personalizadas`,smartPlugs:`Configuraciones de enchufes Tasmota`,externalLinks:`Enlaces de la barra lateral a servicios externos`,printers:`Información de las impresoras (códigos de acceso excluidos)`,plateDetection:`Imágenes de referencia de la cama vacía`,filaments:`Tipos y costes de filamento`,maintenance:`Programaciones de mantenimiento personalizadas`,archives:`Todos los datos de impresión + archivos (3MF, miniaturas, fotos)`,projects:`Proyectos, elementos de la lista de materiales y adjuntos`,pendingUploads:`Subidas de la impresora virtual pendientes de revisión`,apiKeys:`Claves API de webhook (se generan claves nuevas al importar)`},requiresPrinters:`Requiere que se seleccionen las impresoras`,zipFileWarning:`Se creará un archivo ZIP.`,zipFileDescription:`Incluye todos los archivos 3MF, las miniaturas, los time-lapses y las fotos. Esto puede tardar un rato y dar como resultado un archivo grande.`,includeAccessCodes:`Incluir los códigos de acceso`,includeAccessCodesDescription:`Para transferir a otra máquina`,includeAccessCodesWarning:`Los códigos de acceso se incluirán en texto plano. ¡Mantenga este archivo de copia de seguridad seguro!`,categoriesSelected:`{{selectedCount}} categorías seleccionadas`},pendingUploads:{placeholders:{notes:`Añada notas sobre esta impresión...`},discardUpload:`Descartar subida`,archiveAllUploads:`Archivar todas las subidas`,discardAllUploads:`Descartar todas las subidas`,archive:`Archivar`,timeAgo:{justNow:`Ahora mismo`,minutesAgo:`hace {{minutes}} min`,hoursAgo:`hace {{hours}} h`,daysAgo:`hace {{days}} d`}},apiBrowser:{placeholders:{requestBody:`Cuerpo de la solicitud JSON...`,searchEndpoints:`Buscar puntos de conexión...`}},configureAmsSlot:{title:`Configurar la ranura del AMS`,slotConfigured:`¡Ranura configurada!`,configuringSlot:`Configurando la ranura:`,slotLabel:`{{ams}} Ranura {{slot}}`,searchPresets:`Buscar preajustes...`,colorPlaceholder:`Nombre del color o hexadecimal (p. ej., marrón, FF8800)`,clearCustomColor:`Borrar el color personalizado`,noCloudPresets:`No hay preajustes de la nube. Inicie sesión en Bambu Cloud para sincronizar.`,noPresetsAvailable:`No hay preajustes disponibles. Inicie sesión en Bambu Cloud o importe perfiles locales.`,noMatchingPresets:`No se encontraron preajustes coincidentes.`,custom:`Personalizado`,builtin:`Integrado`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Ajustes enviados a la impresora`,filamentProfile:`Perfil de filamento`,kProfileLabel:`Perfil K (avance de presión)`,filteringFor:`Filtrando por: {{material}}`,noKProfile:`Sin perfil K (usar el predeterminado 0,020)`,noMatchingKProfiles:`No se encontraron perfiles K coincidentes. Se usará el K=0,020 predeterminado.`,otherKProfiles:`Otros perfiles K en esta impresora`,selectFilamentFirst:`Seleccione primero un perfil de filamento`,kFromCalibration:`K={{value}} de la calibración de la impresora`,customColorLabel:`Color personalizado (opcional)`,presetColors:`Colores de {{name}}:`,showLessColors:`Mostrar menos colores`,showMoreColors:`Mostrar más colores`,clear:`Borrar`,hexLabel:`Hex: #{{hex}}`,resetting:`Restableciendo...`,resetSlot:`Restablecer ranura`,cancel:`Cancelar`,configuring:`Configurando...`,configureSlot:`Configurar ranura`},githubBackup:{title:`Copia de seguridad en Git`,history:`Historial`,downloadBackup:`Descargar copia de seguridad`,restoreBackup:`Restaurar copia de seguridad`,noBackupsYet:`Aún no hay copias de seguridad`},emailSettings:{placeholders:{fromName:`BamBuddy`}},tagManagement:{searchTags:`Buscar etiquetas...`,renameTag:`Renombrar etiqueta`,deleteTag:`Eliminar etiqueta`},notificationTemplates:{placeholders:{title:`Título de la notificación...`,body:`Cuerpo de la notificación...`}},batchTag:{placeholders:{newTag:`Introduzca una nueva etiqueta...`}},photoGallery:{deletePhoto:`Eliminar foto`},filamentHoverCard:{copySpoolUuid:`Copiar el UUID de la bobina`},kProfilesView:{hasNote:`Tiene nota`,copyProfile:`Copiar perfil`},layout:{openMenu:`Abrir menú`,noPermissionSystemInfo:`No tiene permiso para ver la información del sistema`},dashboard:{dragToReorder:`Arrastre para reordenar`,hideWidget:`Ocultar widget`},notificationProviderCard:{deleteNotificationProvider:`Eliminar proveedor de notificaciones`},fileManagerModal:{closeFileManager:`Cerrar el gestor de archivos`,sortFiles:`Ordenar archivos`,goToParentFolder:`Ir a la carpeta superior`,threeView:`Vista 3D`},embeddedCameraViewer:{refreshStream:`Actualizar la transmisión`,close:`Cerrar`,zoomOut:`Alejar`,resetZoom:`Restablecer el zoom`,zoomIn:`Acercar`,dragToResize:`Arrastre para redimensionar`},timelapseViewer:{skipBack5s:`Retroceder 5 s`,skipForward5s:`Avanzar 5 s`},notificationProviders:{descriptions:{email:`Notificaciones por correo SMTP`,telegram:`Notificaciones mediante un bot de Telegram`,discord:`Enviar a un canal de Discord mediante un webhook`,ntfy:`Notificaciones push gratuitas y autoalojables`,pushover:`Notificaciones push sencillas y fiables`,callmebot:`Notificaciones de WhatsApp gratuitas mediante CallMeBot`,webhook:`POST HTTP genérico a cualquier URL`}},logViewer:{searchPlaceholder:`Buscar mensaje o nombre del registrador...`,noLogEntries:`No se encontraron entradas de registro`},switchbarPopover:{noSwitchesInSwitchbar:`No hay interruptores en la barra de interruptores`},projectPageModal:{placeholders:{title:`Título`,designer:`Diseñador`,license:`Licencia`,description:`Introduzca una descripción...`,profileTitle:`Título del perfil`,profileDescription:`Descripción del perfil...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`En espera`,justNow:`Ahora mismo`,now:`Ahora`,minsAgo:`hace {{count}} min`,inMins:`en {{count}} min`,hoursAgo:`hace {{count}} h`,inHours:`en {{count}} h`,daysAgo:`hace {{count}} d`,inDays:`en {{count}} d`},spoolbuddy:{nav:{dashboard:`Panel`,ams:`AMS`,inventory:`Inventario`,writeTag:`Escribir`,settings:`Ajustes`},status:{nfcReady:`NFC listo`,nfcOff:`NFC apagado`,offline:`Desconectado`,online:`En línea`,noPrinters:`No hay impresoras`,deviceOffline:`Dispositivo desconectado`,waitingConnection:`Esperando la conexión del dispositivo...`,systemReady:`Sistema listo`,status:`Estado`},dashboard:{readyToScan:`Listo para escanear`,idleMessage:`Coloque una bobina en la báscula para identificarla`,nfcHint:`La etiqueta NFC se leerá automáticamente`,device:`Dispositivo`,syncWeight:`Sincronizar peso`,weightSynced:`¡Sincronizado!`,unknownTag:`Etiqueta desconocida`,newTag:`Nueva etiqueta detectada`,onScale:`en la báscula`,linkSpool:`Vincular a bobina`,linkTagTitle:`Vincular la etiqueta a una bobina`,linkTag:`Vincular etiqueta`,selectSpool:`Seleccione una bobina a la que vincular esta etiqueta:`,noUntagged:`No se encontraron bobinas sin etiquetas`,tagDetected:`Etiqueta detectada`,noTag:`Sin etiqueta`,tagId:`Etiqueta`,grossWeight:`Peso bruto`,spoolSize:`Tamaño de la bobina`,close:`Cerrar`,currentSpool:`Bobina actual`,plateReady:`Cama lista: {{name}}`,plateReadyLabel:`Camas listas para despejar`,plateClearAction:`Despejar`,plateClearedToast:`Cama marcada como despejada`,plateClearFailed:`No se pudo marcar la cama como despejada`},modal:{spoolDetected:`Bobina detectada`,assignToAms:`Asignar al AMS`,syncWeight:`Sincronizar peso`,weightSynced:`¡Sincronizado!`,syncing:`Sincronizando...`,newTagDetected:`Nueva etiqueta detectada`,addToInventory:`Añadir al inventario`,assignToAmsTitle:`Asignar al AMS`,selectSlot:`Seleccione una ranura`,assign:`Asignar`,assigning:`Asignando...`,assignSuccess:`¡Asignada!`,assignPendingInsert:`Asignada. La ranura se configurará cuando inserte la bobina.`,assignError:`Error al asignar la bobina. Inténtelo de nuevo.`,noPrinterSelected:`Seleccionar una impresora...`,noAmsDetected:`No se detectó ningún AMS en esta impresora`,slot:`Ranura`},weight:{noReading:`Sin lectura`,stable:`Estable`,measuring:`Midiendo...`,tare:`Tara`,calibrate:`Calibrar`},spool:{remaining:`Restante`,material:`Material`,brand:`Marca`,color:`Color`,coreWeight:`Núcleo`,labelWeight:`Etiqueta`,scaleWeight:`Báscula`,netWeight:`Neto`,lastUsed:`Usada por última vez`,unknownColor:`Color desconocido`},ams:{noData:`No se detectó ningún AMS`,connectAms:`Conecte un AMS para ver las ranuras de filamento`,noPrinter:`No hay impresora seleccionada`,selectPrinter:`Seleccione una impresora en la barra superior`,printerDisconnected:`Impresora desconectada`,humidity:`Humedad`,level:`Nivel`,active:`Activa`,slot:`Ranura`,empty:`Vacía`},inventory:{search:`Buscar bobinas...`,empty:`No hay bobinas en el inventario`,noResults:`No hay bobinas coincidentes`,spools:`bobinas`,addSpool:`Añadir bobina`},settings:{tabDevice:`Dispositivo`,tabDisplay:`Pantalla`,tabScale:`Báscula`,tabUpdates:`Actualizaciones`,nfcReader:`Lector NFC`,type:`Tipo`,connection:`Conexión`,notConnected:`N/D`,deviceInfo:`Información del dispositivo`,hostname:`Host`,uptime:`Tiempo de actividad`,systemConfig:`Backend y autenticación`,backendUrl:`URL del backend de Bambuddy`,apiToken:`Token de API`,apiTokenPlaceholder:`Introduzca el token de API`,saveConfig:`Guardar configuración`,systemQueued:`Configuración encolada.`,nfcDiagnostic:`Diagnóstico de NFC`,scaleDiagnostic:`Diagnóstico de la báscula`,readTagDiagnostic:`Diagnóstico de lectura de etiqueta`,testNfc:`Probar el lector`,testScale:`Probar la precisión`,testReadTag:`Leer etiqueta`,systemFieldsRequired:`La URL del backend es obligatoria.`,brightness:`Brillo`,saved:`Guardado`,noBacklight:`No se detectó retroiluminación DSI. El control del brillo requiere una pantalla DSI.`,screenBlank:`Tiempo de espera para apagar la pantalla`,screenBlankDesc:`La pantalla se apaga tras la inactividad. Toque para activarla.`,displayNote:`El brillo se aplica como un filtro de software.`,scaleCalibration:`Calibración de la báscula`,currentWeight:`Peso actual`,tareOffset:`Tara`,calFactor:`Factor`,knownWeight:`Peso conocido`,calStep1:`Retire todos los elementos de la báscula y pulse Poner a cero.`,calStep2:`Coloque el peso conocido en la báscula.`,setZero:`Poner a cero`,calibrateNow:`Calibrar`,calibrated:`Calibrada`,tareSet:`Comando de tara enviado. Esperando al dispositivo...`,tareComplete:`¡Tara completada!`,tareTimedOut:`Tara agotó el tiempo de espera — ¿está activo el daemon de SpoolBuddy?`,tareFailed:`Error al enviar el comando de tara`,zeroSet:`Punto cero establecido. Coloque el peso conocido en la báscula.`,calibrationDone:`¡Calibración completada!`,calibrationFailed:`Error en la calibración`,lastCalibrated:`Calibrada por última vez`,stable:`Estable`,settling:`Estabilizando...`,firmware:`Firmware`,scale:`Báscula`,noDevice:`No se encontró ningún dispositivo SpoolBuddy`,daemonVersion:`Versión del demonio`,currentVersion:`Actual`,versionPending:`Esperando al demonio...`,checking:`Comprobando...`,checkUpdates:`Buscar actualizaciones`,updateAvailable:`Actualización disponible`,updateInstructions:`Actualice mediante SSH: ejecute el script de instalación de SpoolBuddy para actualizar.`,upToDate:`Actualizado`,includeBeta:`Incluir versiones beta`},writeTag:{tabExisting:`Bobina existente`,tabNew:`Bobina nueva`,tabReplace:`Reemplazar etiqueta`,searchPlaceholder:`Buscar por material, color, marca...`,noUntaggedSpools:`No hay bobinas sin etiquetas`,noTaggedSpools:`No hay bobinas con etiquetas`,selectSpool:`Seleccione una bobina y luego coloque una etiqueta NTAG en blanco en el lector`,placeTag:`Coloque una etiqueta NTAG en el lector`,tagReady:`Etiqueta detectada — lista para escribir`,writeTag:`Escribir etiqueta`,replaceTag:`Reemplazar etiqueta`,writing:`Escribiendo la etiqueta...`,waiting:`Esperando a SpoolBuddy...`,writeSuccess:`¡Etiqueta escrita correctamente!`,writeFailed:`Error al escribir`,queueFailed:`Error al encolar el comando de escritura`,tryAgain:`Inténtelo de nuevo`,cancel:`Cancelar`,replaceWarning:`La etiqueta antigua se desvinculará. La nueva etiqueta la reemplazará.`,deviceOffline:`SpoolBuddy está desconectado`,material:`Material`,colorName:`Nombre del color`,color:`Color`,brand:`Marca`,weight:`Peso (g)`,createSpool:`Crear bobina`,creating:`Creando...`,spoolCreated:`¡Bobina creada! Lista para escribir.`,createFailed:`Error al crear la bobina`,incompleteDataWarning:`Etiqueta escrita con datos de Spoolman incompletos`},quickMenu:{printerPower:`Alimentación de la impresora`,systemControls:`Sistema`,restartDaemon:`Reiniciar demonio`,restartBrowser:`Reiniciar navegador`,reboot:`Reiniciar`,shutdown:`Apagar`,swipeToClose:`Deslice hacia abajo para cerrar`,confirmTitle:`Confirmar`,confirmShutdown:`¿Está seguro de que desea apagar el SpoolBuddy? Necesitará acceso físico para volver a encenderlo.`,confirmReboot:`¿Está seguro de que desea reiniciar el SpoolBuddy?`,confirmRestartDaemon:`¿Reiniciar el demonio de SpoolBuddy? El NFC y la báscula no estarán disponibles temporalmente.`,confirmRestartBrowser:`¿Reiniciar el navegador del quiosco? La pantalla se quedará en negro brevemente.`,confirm:`Confirmar`,confirmPlugOn:`¿Encender {{name}}?`,confirmPlugOff:`¿Apagar {{name}}?`,turnOn:`Encender`,turnOff:`Apagar`}},diagnostic:{modalTitle:`Diagnóstico de conexión — {{name}}`,running:`Ejecutando el diagnóstico...`,runningElapsed:`Ejecutando el diagnóstico... ({{elapsed}}s)`,waitingForReportHint:`Esperando a que la impresora publique un informe de estado — puede tardar hasta {{max}} segundos.`,runFailed:`No se pudo ejecutar el diagnóstico: {{error}}`,retry:`Ejecutar de nuevo`,runButton:`Ejecutar diagnóstico`,sectionTitle:`Diagnóstico de conexión`,sectionDescription:`Compruebe por qué una impresora no se conecta o no imprime — accesibilidad de los puertos, modo desarrollador LAN, modo de red de Docker y credenciales.`,noPrinters:`No hay impresoras configuradas.`,overall:{ok:`No se encontraron problemas — la conexión de la impresora parece correcta.`,warnings:`La impresora debería funcionar, pero algunas cosas necesitan atención.`,problems:`Se encontraron problemas que explican por qué la impresora no se conecta o no imprime.`},check:{port_mqtt:{title:`Puerto de control (MQTT 8883)`,pass:`Accesible — la impresora acepta conexiones de control.`,fail:`El puerto 8883 no es accesible. La impresora está apagada, en una dirección IP distinta, o un cortafuegos lo está bloqueando. Verifique la IP de la impresora y que nada bloquee el puerto 8883.`},port_ftps:{title:`Puerto de transferencia de archivos (FTPS 990)`,pass:`Accesible — el envío de archivos de impresión funcionará.`,warn:`El puerto 990 no es accesible. La supervisión puede seguir funcionando, pero el envío de impresiones a la impresora fallará. Asegúrese de que el puerto 990 no esté bloqueado.`,warn_no_tls:`El puerto 990 está abierto, pero el servicio de archivos de la impresora no completa el protocolo de enlace TLS. No se pueden obtener los archivos de impresión, las portadas ni los timelapses, por lo que los archivos quedan vacíos. Reinicie la impresora — desbloquear el puerto no servirá.`},external_storage:{title:`Almacenar archivos enviados en almacenamiento externo (paso 4 de instalación)`,pass:`La impresora informa que esta opción está activada — los archivos enviados se guardarán en la tarjeta SD y los archivos tendrán miniaturas y metadatos del slicer.`,fail:`La impresora informa que esta opción está desactivada. Active "Almacenar archivos enviados en almacenamiento externo" — en firmware reciente (P2S 01.02 / Bambu Studio 2.6+) el conmutador está en los Ajustes de Impresión de la impresora; en versiones anteriores está en la pestaña Dispositivo de Bambu Studio / OrcaSlicer. Sin esta opción, cada impresión archivada queda sin miniatura ni metadatos del slicer.`,skip:`No comprobado — se necesita una conexión MQTT activa. En slicers más antiguos donde este ajuste solo existe en el slicer, la impresora no lo reporta, así que esta comprobación pasa aunque la opción esté desactivada — verifique el paso 4 de la instalación manualmente.`,skip_unsupported_model:`Este modelo tiene ranura SD pero no hay forma de activar la opción — el firmware actual de la serie P1 no muestra el interruptor en Bambu Studio y la impresora no tiene pantalla. Aquí no hay nada que arreglar; a las impresiones archivadas pueden faltarles miniaturas y metadatos del slicer hasta que Bambu Lab lo admita por firmware.`,fail_no_media:`La opción está activada, pero la impresora no detecta ninguna tarjeta ni memoria en su ranura, así que los archivos enviados no tienen dónde ir. Inserte una e imprima de nuevo — hasta entonces, cada impresión archivada carecerá de miniatura y de metadatos del laminador.`,warn_internal_storage:`La opción está activada y hay almacenamiento presente, pero la última impresión aun así fue al almacenamiento interno de la impresora, que Bambuddy no puede leer. En la serie H2, la P2S y la X2D, el botón «Imprimir» de Bambu Studio siempre envía ahí, sea cual sea este ajuste. Las impresiones se archivan con su nombre y sus tiempos, pero sin miniatura ni metadatos del laminador. Para archivos completos, inicia las impresiones desde Bambuddy o lamina en OrcaSlicer, o bien en Bambu Studio usa «Enviar» con «Externo» y luego inicia la impresión.`,warn_internal_history:`La opción está activada y hay almacenamiento, pero la última impresión salió de un archivo que ya estaba en la impresora: una reimpresión desde su pantalla, un inicio desde Handy o un archivo enviado antes. Esa biblioteca reside en el almacenamiento interno, que Bambuddy no puede leer, y ninguna opción lo cambia, porque para esa impresión no se envió nada. Se sigue archivando con su nombre y sus tiempos, pero sin miniatura ni metadatos del laminador. Para archivos completos, inicia las impresiones desde Bambuddy o envíalas desde el laminador.`},port_rtsps:{title:`Puerto de la cámara ({{protocol}} {{port}})`,pass:`Accesible — la transmisión de la cámara funcionará.`,warn:`El puerto {{port}} no es accesible. La vista de la cámara en directo no funcionará. Esto no afecta a la impresión.`},macos_local_network:{title:`Permiso de red local de macOS`,pass:`macOS permite que Bambuddy acceda a la red local.`,warn_unsigned:`El Python que ejecuta Bambuddy no tiene firma de código, así que macOS no tiene a qué asociar el permiso de red local y descarta en silencio todas las conexiones con la impresora: sin error y sin solicitud. Ejecuta el actualizador de Bambuddy (install/update_macos.sh), que lo firma, y reinicia Bambuddy. Intérprete: {{executable}}`,warn_permission:`Si la impresora está encendida y en esta dirección, abre Ajustes del Sistema > Privacidad y seguridad > Red local y comprueba que el Python de Bambuddy esté activado. Si no lo está, macOS descarta las conexiones locales en silencio, y actualizar Python puede dejar atrás el permiso anterior.`},network_mode:{title:`Modo de red del contenedor`,genericRuntime:`un contenedor`,pass:`Ejecutándose en {{runtime}} con red de host.`,warn:`Bambuddy se está ejecutando en {{runtime}} con red de tipo bridge. La detección de impresoras y la impresora virtual necesitan el modo de red de host — vuelva a crear el contenedor con red de host ("network_mode: host" en docker-compose, "--network=host" en Podman).`,skip:`No se está ejecutando en un contenedor — no aplicable.`,skip_unknown:`Bambuddy se está ejecutando en {{runtime}}, pero no se pudo determinar su modo de red. Si la detección de impresoras o la impresora virtual no funcionan, vuelva a crear el contenedor con red de host.`,skip_system_container:`Bambuddy se está ejecutando en un contenedor de sistema {{runtime}}, que está en la LAN como una máquina virtual — no aplicable.`},subnet:{title:`Subred de la red`,pass:`La impresora y Bambuddy están en la misma subred.`,warn:`La impresora ({{printer_ip}}) y Bambuddy ({{host_ip}}) están en subredes distintas. Es posible que no se alcancen entre sí a menos que se configure el enrutamiento entre las subredes.`,skip:`No se pudo determinar la subred — omitido.`},mqtt_auth:{title:`Credenciales de la impresora`,pass:`La impresora aceptó la conexión.`,fail:`La impresora es accesible pero Bambuddy no está conectado a ella. Lo más probable es que el código de acceso o el número de serie sean incorrectos — el código de acceso cambia cada vez que se conmuta el modo Solo LAN o el modo desarrollador, así que vuelva a copiarlo de la pantalla de la impresora. Una impresora que se está reiniciando, o que ya alcanzó su límite de conexiones simultáneas, se ve igual.`,fail_auth_rejected:`La impresora rechazó las credenciales de Bambuddy. El código de acceso o el número de serie son incorrectos — el código de acceso cambia cada vez que se conmuta el modo Solo LAN o el modo desarrollador, así que vuelva a copiarlo de la pantalla de la impresora y guárdelo en la configuración de la impresora.`,skip:`No comprobado — no se pudo alcanzar la impresora.`},developer_mode:{title:`Modo desarrollador LAN`,pass:`El modo desarrollador está activado.`,fail:`El modo desarrollador está DESACTIVADO en la impresora. Actívelo en los ajustes de LAN de la impresora — y confirme con Aceptar. Sin él, las impresiones no comenzarán.`,skip:`No se pudo comprobar — requiere una conexión activa con la impresora.`},printer_publishing:{title:`La impresora publica estado`,pass:`La impresora está publicando actualizaciones de estado — AMS, filamentos y perfiles K se reflejarán correctamente en el slicer.`,fail:`El broker MQTT aceptó la conexión, pero la impresora no ha publicado ningún informe de estado. Casi siempre se trata de un número de serie incorrecto o con mayúsculas/minúsculas mal escritas — el topic device/<serial>/report distingue entre mayúsculas y minúsculas. Revise el número de serie en los ajustes de la impresora comparándolo con la pantalla del aparato.`,skip:`No se pudo comprobar — requiere una conexión activa con la impresora.`}}},systemHealth:{sectionTitle:`Estado del sistema`,sectionDescription:`Analiza los registros recientes en busca de problemas conocidos que normalmente puedes resolver tú mismo, antes de que se conviertan en un ticket de soporte.`,rescan:`Volver a analizar`,clean:`No se encontraron problemas conocidos en las últimas {{times}} entradas de registro.`,logUnavailable:`El registro en archivo está desactivado, por lo que no se pueden analizar los registros. Activa el registro en archivo para usar esta comprobación.`,learnMore:`Cómo solucionarlo`,fixLabel:`Solución:`,occurrences:`Visto {{times}}× — última vez a las {{lastSeen}}`,category:{layer8:`Puedes solucionarlo`,environment:`Entorno`,bug:`Por favor, repórtalo`},signature:{"ftp-auth-rejected":{name:`La impresora rechazó el código de acceso`,cause:`La impresora rechazó el inicio de sesión de transferencia de archivos. El código de acceso es incorrecto o cambió tras activar el Modo Desarrollador.`,fix:`Vuelve a copiar el código de acceso desde la pantalla de la impresora (ajustes de LAN) y actualízalo en los ajustes de la impresora en Bambuddy.`},"ftp-connection-timeout":{name:`Se agotó el tiempo de la conexión de transferencia de archivos`,cause:`Bambuddy no pudo alcanzar el puerto de transferencia de archivos de la impresora (FTPS 990). El puerto está bloqueado, o la impresora está apagada o en otra subred.`,fix:`Asegúrate de que nada bloquee el puerto 990 entre Bambuddy y la impresora, y de que ambos estén en la misma red.`},"ftp-ssl-error":{name:`Falló el protocolo de enlace seguro de transferencia de archivos`,cause:`El servicio de archivos de la impresora respondió en el puerto 990 sin TLS. Su servidor de archivos se ha bloqueado: es un fallo de la impresora, no del cortafuegos ni del firmware.`,fix:`Reinicia la impresora. Hasta entonces no se pueden descargar archivos de impresión, portadas ni timelapses; la impresión en sí no se ve afectada.`},"bambu-cloud-captcha":{name:`Bambu Cloud solicita un CAPTCHA`,cause:`La protección antiabuso de Bambu está verificando esta red, por lo que ningún inicio de sesión en Bambu Cloud puede completarse. Depende de la dirección IP pública, no de tu cuenta ni de esta instalación.`,fix:`Espera: suele resolverse en unas horas y los intentos repetidos lo prolongan. Mientras tanto, conéctate con un token de acceso obtenido en una sesión del navegador.`},"mqtt-connection-flapping":{name:`La conexión con la impresora se cae continuamente`,cause:`La conexión de control (MQTT 8883) se desconecta y reconecta repetidamente, normalmente por una red débil o un puerto parcialmente bloqueado.`,fix:`Comprueba la señal Wi-Fi en la impresora, usa preferentemente una conexión por cable y asegúrate de que el puerto 8883 sea accesible de forma fiable.`},"camera-connection-refused":{name:`Transmisión de cámara inaccesible`,cause:`No se pudo acceder a la cámara en vivo en el puerto RTSPS 322. El puerto está bloqueado, o la cámara o la vista en vivo por LAN están desactivadas en la impresora.`,fix:`Activa la cámara y la vista en vivo por LAN en la impresora y asegúrate de que el puerto 322 no esté bloqueado. Esto no afecta a la impresión.`},"database-locked":{name:`Conflictos de escritura en la base de datos`,cause:`La base de datos SQLite presenta errores "database is locked" bajo carga, algo habitual al usar varias impresoras a la vez.`,fix:`Cambia Bambuddy a una base de datos PostgreSQL externa. Consulta la guía de PostgreSQL en la documentación.`}}},vpDiagnostic:{title:`Comprobación de configuración — {{name}}`,runButton:`Ejecutar comprobación de configuración`,running:`Ejecutando comprobación de configuración...`,runFailed:`No se pudo ejecutar la comprobación de configuración: {{error}}`,retry:`Volver a comprobar`,overall:{ok:`Todas las comprobaciones se superaron — esta impresora virtual está configurada correctamente.`,warnings:`La impresora virtual debería funcionar, pero algunas cosas requieren atención.`,problems:`Se encontraron problemas que explican por qué el laminador no puede ver ni usar esta impresora virtual.`},check:{enabled:{title:`Impresora virtual habilitada`,fail:`Esta impresora virtual está apagada. Actívela para que sea detectable.`},running:{title:`Servicios en ejecución`,fail:`La impresora virtual está habilitada pero sus servicios no se están ejecutando. Revise el registro de Bambuddy — normalmente los detiene un conflicto de IP de enlace o un error de permisos.`},bind_interface:{title:`Interfaz de red de enlace`,fail:`La interfaz de enlace no está configurada o ya no existe en este host. Elija una interfaz actual en el menú "Interfaz de enlace".`},access_code:{title:`Código de acceso configurado`,fail:`No hay ningún código de acceso configurado. Al laminador se le debe dar el mismo código de acceso de 8 caracteres que configura aquí.`},target_printer:{title:`Impresora de destino`,fail:`No hay ninguna impresora de destino seleccionada. El modo proxy necesita una impresora real a la que reenviar.`,warn:`La impresora de destino está desconectada ahora mismo — el reenvío se reanudará cuando vuelva a conectarse.`},port_ftps:{title:`Servicio de subida de archivos (puerto {{port}})`,fail:`No hay nada escuchando en el puerto {{port}} de la IP de enlace, por lo que el laminador no puede subir archivos. La causa habitual es un conflicto de puerto en esta interfaz.`},port_mqtt:{title:`Servicio de control (puerto {{port}})`,fail:`No hay nada escuchando en el puerto {{port}} de la IP de enlace, por lo que el laminador no puede conectarse ni mostrar el estado.`},port_bind:{title:`Servicio de detección (puerto {{port}})`,fail:`No hay nada escuchando en el puerto {{port}} de la IP de enlace, por lo que falla el protocolo de detección del laminador.`},privileged_ports:{title:`Vinculación a puertos privilegiados`,fail:`El puerto {{port}} está por debajo de 1024 y este servicio no tiene permiso para vincularlo, por eso no hay nada escuchando arriba. Añade AmbientCapabilities=CAP_NET_BIND_SERVICE a /etc/systemd/system/bambuddy.service y reinicia, o ejecuta "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))". En Docker, añade cap_add: [NET_BIND_SERVICE].`},certificate:{title:`Certificado TLS`,pass:`Certificado listo. Asegúrese de que el certificado de CA de Bambuddy (arriba) esté importado en el almacén de confianza de su laminador.`,fail:`Falta el certificado TLS de esta impresora virtual. Compruebe que el directorio de datos de Bambuddy tenga permisos de escritura.`}}},bugReport:{logHealthSummary:`Se encontraron problemas conocidos en tus registros`,logHealthIntro:`Los registros recientes coinciden con problemas conocidos. Revisa las soluciones de abajo: resolverlas podría arreglar tu problema sin un informe de error. Aun así, puedes enviar un informe abajo.`,title:`Informar de un error`,description:`Descripción`,descriptionPlaceholder:`¿Qué salió mal? Describa el problema...`,email:`Correo (opcional)`,emailPlaceholder:`su@correo.com`,emailPrivacy:`Si lo proporciona, su correo se incluirá en una sección plegada de la incidencia de GitHub para que el mantenedor pueda hacer un seguimiento.`,screenshot:`Captura de pantalla`,uploadOrPaste:`Suba, pegue o arrastre una imagen`,dataCollectedSummary:`¿Qué datos se incluyen en el informe?`,dataIncluded:`Incluidos:`,dataIncludedList:`Versión de la aplicación, sistema operativo, arquitectura, versión de Python, estadísticas de la base de datos (solo recuentos), modelos de impresora, número de boquillas, versiones de firmware, estado de la conectividad, estado de las integraciones (Spoolman, MQTT, HA), ajustes no sensibles, número de interfaces de red, detalles de Docker, versiones de las dependencias.`,dataNeverIncluded:`Nunca incluidos:`,dataNeverIncludedList:`Nombres de impresora, números de serie, códigos de acceso, contraseñas, direcciones IP, direcciones de correo, claves API, tokens, URL de webhook, nombres de host o nombres de usuario.`,submit:`Enviar`,startLogging:`Iniciar el registro de depuración`,stepEnableLogging:`Registro de depuración activado`,stepReproduce:`Reproduzca el problema ahora`,stepStopLogging:`Detener y enviar el informe`,stopAndSubmit:`Detener y enviar`,maxDuration:`Se detiene automáticamente tras {{minutes}} min`,stoppingLogs:`Recopilando registros y enviando...`,submitting:`Enviando el informe de error...`,submittingStepConnection:`Ejecutando comprobaciones de conectividad de impresoras`,submittingStepVirtualPrinters:`Ejecutando comprobaciones de configuración de impresoras virtuales`,submittingStepLogScan:`Analizando los registros recientes en busca de problemas conocidos`,submittingStepSubmit:`Enviando el informe a GitHub`,submitSuccess:`¡Informe de error enviado correctamente!`,submitFailed:`Error al enviar el informe de error`,diagnosticChecking:`Comprobando las conexiones de las impresoras...`,diagnosticHealthy:`La comprobación de conexión se superó — no se encontraron problemas en sus impresoras.`,diagnosticSummary:`{{problems}} de {{total}} impresoras tienen problemas de conexión`,diagnosticIntro:`Una o más impresoras tienen un problema de conexión que puede estar causando su problema. Despliegue una impresora a continuación para ver la solución — resolverla podría solucionar el problema sin un informe de error. Aún puede enviar un informe a continuación.`,thankYou:`¡Gracias!`,submitted:`Su informe de error se ha enviado.`,viewIssue:`Ver incidencia`,closeKeepsRecording:`Puedes cerrar este panel mientras reproduces el problema: la grabación sigue en marcha y al volver a abrirlo regresarás aquí.`,resumeRecording:`Informe de error grabando — {{elapsed}}. Haz clic para finalizar.`,resumeReport:`Reanudar informe`,unexpectedError:`Se produjo un error inesperado`},failureDetection:{title:`Detección de fallos por IA`,description:`Supervise las impresiones con una API de ML de Obico autoalojada y actúe automáticamente ante los fallos detectados.`,mlUrl:`URL de la API de ML de Obico`,mlUrlHint:`URL base de su contenedor ml_api de Obico autoalojado (p. ej. http://192.168.1.10:3333).`,mlToken:`Token de la API de ML (opcional)`,mlTokenPlaceholder:`Déjelo vacío si el servidor funciona sin ML_API_TOKEN`,mlTokenHint:`Debe coincidir con la variable de entorno ML_API_TOKEN de su contenedor ml_api de Obico. Déjelo vacío si el contenedor funciona sin token.`,test:`Probar`,testSuccess:`API de ML accesible y correcta.`,testSuccessTokenUnknown:`API de ML accesible y correcta. No se pudo comprobar el token.`,testFailed:`No se pudo alcanzar la API de ML.`,sensitivity:`Sensibilidad`,sensitivityLow:`Baja (menos falsos positivos)`,sensitivityMedium:`Media (equilibrada)`,sensitivityHigh:`Alta (detección temprana, más falsos positivos)`,sensitivityHint:`Ajusta los umbrales de confianza que activan las advertencias y los fallos.`,action:`Acción ante un fallo detectado`,actionNotify:`Solo notificar`,actionPause:`Pausar la impresión`,actionPauseOff:`Pausar y cortar la corriente`,pollInterval:`Intervalo de sondeo (segundos)`,pollIntervalHint:`Con qué frecuencia comprobar cada impresora mientras imprime. Mínimo 5 s, máximo 120 s.`,externalUrlMissing:`La URL externa no está establecida.`,externalUrlHint:`La API de ML obtiene la captura de la cámara por URL. Establezca la URL externa en los ajustes generales para que el contenedor de la API de ML pueda alcanzar Bambuddy.`,perPrinterTitle:`Impresoras supervisadas`,perPrinterHint:`Elija qué impresoras vigila el servicio de detección.`,monitorAll:`Supervisar todas las impresoras conectadas`,statusTitle:`Estado`,serviceRunning:`Servicio en ejecución`,thresholds:`Umbrales bajo / alto`,activePrinters:`Impresiones activas`,noActivePrints:`No hay impresiones en curso actualmente.`,historyTitle:`Detecciones recientes`,noHistory:`Aún no hay detecciones.`},makerworld:{title:`MakerWorld`,description:`Pegue la URL de un modelo de MakerWorld para importarlo e imprimirlo directamente desde Bambuddy — sin tener que salir a la aplicación Bambu Handy.`,pasteUrlHeader:`Importar desde MakerWorld`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… o pegue cualquier enlace de MakerWorld`,resolveButton:`Resolver`,signInRequiredTitle:`Se requiere iniciar sesión en Bambu Cloud para descargar`,signInRequiredBody:`Puede explorar los detalles del modelo de forma anónima, pero MakerWorld requiere una cuenta de Bambu Cloud para descargar archivos 3MF.`,signInExpiredTitle:`La sesión de Bambu Cloud ha caducado`,signInExpiredBody:`Sigue conectado a Bambuddy, pero Bambu Lab ha dejado de aceptar el token almacenado, por lo que las descargas fallarán. Inicie sesión de nuevo en Bambu Cloud.`,openCloudSettings:`Abrir los ajustes de la nube`,untitledModel:`Modelo sin título`,byCreator:`de {{name}}`,downloadsCount:`{{count}} descargas`,licensePrefix:`Licencia`,alreadyImported:`Ya está en la biblioteca`,openOnMakerworld:`Abrir en MakerWorld`,alreadyInLibrary:`Este modelo ya está en su biblioteca — encuéntrelo en Gestor de archivos → MakerWorld`,importSuccess:`{{filename}} importado — guardado en Gestor de archivos → MakerWorld`,platesHeader:`Camas ({{count}})`,plateDefaultName:`Cama {{n}}`,materialCount:`{{count}} filamentos`,amsRequired:`AMS necesario`,slicedFor:`Laminado para {{printer}}`,alsoCompatible:`También marcado como compatible: {{printers}}`,importToLibrary:`Guardar`,sliceIn:`Guardar y laminar en {{slicer}}`,disclaimer:`La integración con MakerWorld usa puntos de conexión de API documentados por la comunidad. Bambuddy no está afiliado a MakerWorld ni a Bambu Lab ni cuenta con su respaldo.`,lastImportSuccess:`Importado a su biblioteca`,lastImportAlreadyInLibrary:`Ya está en su biblioteca`,viewInLibrary:`Ver en el gestor de archivos`,openInBambuStudio:`Abrir en Bambu Studio`,openInOrcaSlicer:`Abrir en OrcaSlicer`,importTo:`Importar al gestor de archivos`,recentImportsHeader:`Importaciones recientes`,phaseResolving:`Resolviendo`,phaseDownloading:`Descargando`,folderAuto:`MakerWorld (predeterminada)`,importAll:`Importar todo`,importAllProgress:`Importando {{current}}/{{total}}`,openGallery:`Abrir la galería de imágenes`,galleryPrev:`Imagen anterior`,galleryNext:`Imagen siguiente`,deleteImport:`Quitar de la biblioteca`,importDeleting:`Quitando…`,importDeleted:`Quitado de la biblioteca`,confirmDelete:`¿Quitar {{filename}} de la biblioteca? Esto elimina el archivo local, pero la cama se puede volver a importar desde MakerWorld.`,errors:{resolveFailed:`No se pudo resolver esa URL de MakerWorld.`,downloadFailed:`Error en la descarga. Inténtelo de nuevo.`,deleteFailed:`No se pudo quitar el archivo de la biblioteca.`}},gcodeViewer:{filamentSlot:`Filamento {{n}}`,loading:`Leyendo la trayectoria…`,loadFailed:`No se pudo cargar el G-code de este archivo.`,showTravel:`Movimientos en vacío`,topLayer:`Capa superior`,bottomLayer:`Capa inferior`,noSource:`No se indicó ningún archivo para previsualizar.`,view:{filament:`Filamento`,feature:`Elemento`,height:`Altura`,width:`Ancho`},feature:{wall:`Paredes`,sparseInfill:`Relleno disperso`,solidInfill:`Relleno sólido`,bridge:`Puente / voladizo`,support:`Soporte`,skirt:`Falda / borde`,gapFill:`Relleno de huecos`,ironing:`Alisado`,primeTower:`Torre de purga`},back:`Atrás`,backToArchives:`Volver a los archivos de impresión`,backToFiles:`Volver al gestor de archivos`,plates:`Camas`,plateN:`Cama {{n}}`},libraryTrash:{title:`Papelera`,headerButton:`Papelera`,headerTooltip:`Ver los archivos movidos a la papelera`,backToFiles:`Volver al gestor de archivos`,subtitleAdmin:`Los archivos eliminados permanecen aquí durante {{days}} días y luego se eliminan automáticamente. Esta vista muestra los archivos en la papelera de todos los usuarios.`,subtitleUser:`Los archivos eliminados permanecen aquí durante {{days}} días y luego se eliminan automáticamente.`,loading:`Cargando la papelera…`,loadError:`No se pudo cargar la papelera.`,empty:`La papelera está vacía.`,summary:`{{count}} archivos · {{size}}`,emptyTrash:`Vaciar la papelera`,restore:`Restaurar`,purgeNow:`Eliminar ahora`,autoPurgeIn:`Se elimina automáticamente en {{when}}`,days:`días`,retentionLabel:`Eliminar automáticamente tras`,selectAll:`Seleccionar todo`,selectOne:`Seleccionar {{filename}}`,selectionCount:`{{count}} seleccionados`,bulkRestore:`Restaurar los seleccionados`,bulkPurge:`Eliminar los seleccionados`,col:{filename:`Archivo`,folder:`Carpeta`,size:`Tamaño`,deleted:`Movido a la papelera`,autoPurge:`Se elimina automáticamente`,owner:`Propietario`,actions:`Acciones`},confirm:{purgeTitle:`¿Eliminar permanentemente?`,purgeBody:`{{filename}} se eliminará del disco y no se podrá restaurar.`,emptyTitle:`¿Vaciar la papelera?`,emptyBody:`Los {{count}} archivos se eliminarán del disco. Esto no se puede deshacer.`,bulkPurgeTitle:`¿Eliminar permanentemente los archivos seleccionados?`,bulkPurgeBody:`Los {{count}} archivos seleccionados se eliminarán del disco y no se podrán restaurar.`,cta:`Eliminar permanentemente`},toast:{restored:`Archivo restaurado.`,restoreFailed:`No se pudo restaurar el archivo.`,purged:`Archivo eliminado permanentemente.`,purgeFailed:`No se pudo eliminar el archivo.`,emptied:`Se eliminaron {{count}} archivo(s) de la papelera.`,emptyFailed:`No se pudo vaciar la papelera.`,retentionSaved:`Eliminación automática establecida en {{days}} días.`,retentionFailed:`No se pudo guardar el ajuste de retención.`,bulkRestored:`Se restauraron {{count}} archivo(s).`,bulkPurged:`Se eliminaron {{count}} archivo(s).`}},libraryPurge:{title:`Purgar archivos antiguos`,headerButton:`Purgar antiguos`,headerTooltip:`Mover en bloque los archivos antiguos a la papelera`,description:`Limpie de un solo paso los archivos antiguos de su biblioteca. Los archivos con un historial de impresión envejecen según su fecha de última impresión; los archivos que nunca se imprimieron envejecen según su fecha de subida.`,ageLabel:`Mover los archivos de más de`,days:`días`,includeNeverPrinted:`Incluir los archivos que nunca se han impreso`,effectsTitle:`Qué ocurre cuando hace clic en Purgar`,effect1:`Los archivos coincidentes se mueven a la papelera — aún no se eliminan del disco.`,effect2:`Puede restaurarlos de la papelera en cualquier momento hasta que expire el periodo de retención.`,effect3:`Tras la retención, el barrido de la papelera los elimina permanentemente del disco.`,effect4:`Los archivos de carpetas externas (vinculadas) se omiten — Bambuddy nunca elimina bytes que no le pertenecen.`,previewLoading:`Comprobando cuántos archivos coinciden…`,previewFailed:`No se pudo previsualizar la purga.`,previewSummary:`{{count}} archivos · {{size}} se moverían a la papelera`,andMore:`…y {{count}} más`,warning:`Los archivos en la papelera siguen contando para el almacenamiento hasta que expire el periodo de retención. Vacíe la papelera después para liberar el disco de inmediato.`,confirmCta:`Mover {{count}} a la papelera`,purging:`Moviendo a la papelera…`,toast:{success:`Se movieron {{count}} archivo(s) a la papelera.`,failed:`No se pudieron purgar los archivos.`}},libraryAutoPurge:{enableLabel:`Purgar automáticamente los archivos antiguos`,enableDescription:`Ejecuta la purga de administración una vez al día. Los archivos van primero a la papelera — no se eliminan de inmediato.`,ageLabel:`Purgar automáticamente los archivos de más de`,ageDescription:`Mínimo 7 días, máximo 10 años. Usa la misma regla de antigüedad que el botón de purga manual.`,days:`días`,includeNeverPrinted:`Incluir los archivos que nunca se han impreso`,saveFailed:`No se pudieron guardar los ajustes de purga automática.`},archivePurge:{headerButton:`Purgar antiguos`,headerTooltip:`Eliminar en bloque los archivos antiguos`,title:`Purgar archivos antiguos`,description:`Limpie el historial de impresión antiguo. Cada archivo envejece según la finalización de su impresión más reciente — reimprimir un archivo actualiza su antigüedad, por lo que el trabajo activo nunca se purga.`,ageLabel:`Eliminar los archivos no impresos en los últimos`,days:`días`,effectsTitle:`Qué ocurre cuando hace clic en Purgar`,effect1:`Cada archivo coincidente se oculta de los listados y sus archivos se eliminan del disco (3MF, miniatura, time-lapse, 3MF de origen, archivo de diseño F3D, fotos).`,effect2:`La fila del archivo permanece en la base de datos para que las estadísticas rápidas conserven la contribución de filamento, tiempo, coste y energía — igual que el comportamiento predeterminado de la eliminación de un solo archivo.`,effect3:`Marque «Eliminar también de las estadísticas» abajo para descartar también la contribución a las estadísticas rápidas (coincide con la opción de eliminación de un solo archivo). Esa vía es irreversible.`,effect4:`Reimprimir un archivo actualiza su reloj de antigüedad, por lo que los archivos que aún usa están a salvo.`,purgeStatsLabel:`Eliminar también de las estadísticas`,purgeStatsHint:`Descarta los archivos coincidentes de las estadísticas rápidas (filamento, tiempo, coste, energía). Sin esto, las estadísticas rápidas conservan todas las contribuciones y solo los archivos abandonan el disco.`,previewLoading:`Comprobando cuántos archivos coinciden…`,previewFailed:`No se pudo previsualizar la purga.`,previewSummary:`{{count}} archivos · {{size}} se eliminarían`,andMore:`…y {{count}} más`,warning:`Los archivos se eliminan del disco y no se pueden restaurar. Descargue o marque como favorito todo lo que desee conservar antes de continuar.`,confirmCta:`Eliminar {{count}} archivo(s)`,purging:`Eliminando…`,toast:{success:`Se eliminaron {{count}} archivo(s).`,failed:`No se pudieron purgar los archivos.`}},archiveAutoPurge:{enableLabel:`Purgar automáticamente los archivos antiguos`,enableDescription:`Una vez al día, oculta los archivos de los listados y elimina sus archivos del disco cuando no se han impreso dentro del umbral. Reimprimir un archivo reinicia el reloj.`,ageLabel:`Eliminar automáticamente los archivos no impresos en los últimos`,ageDescription:`Mínimo 7 días, máximo 10 años. Se basa en la finalización de la impresión más reciente — reimprimir un archivo actualiza su antigüedad. Elimina el 3MF, la miniatura, el time-lapse, el 3MF de origen, el F3D y las fotos.`,days:`días`,purgeStatsLabel:`Eliminar también de las estadísticas`,purgeStatsDescription:`Cuando está activado, el barrido diario también descarta cada archivo purgado de las estadísticas rápidas (filamento, tiempo, coste, energía). Desactivado de forma predeterminada — las estadísticas rápidas conservan la contribución, solo los archivos abandonan el disco.`,runNow:`Purgar los archivos ahora`,saveFailed:`No se pudieron guardar los ajustes de purga automática.`},cameraTokens:{scope:{camera_stream:`Transmisión de cámara`,camwall:`Muro de cámaras`,overlay:`Superposición de streaming`},title:`Tokens de API de la cámara`,navTitle:`Tokens de API de la cámara`,description:`Tokens de larga duración para incrustar la transmisión de la cámara en Home Assistant, Frigate, pantallas en modo quiosco o cualquier otra herramienta que necesite una dirección estable. El alcance se elige al crearlos; un token se puede revocar en cualquier momento.`,loading:`Cargando…`,confirmRevoke:{title:`¿Revocar este token?`,body:`Cualquier dispositivo que use "{{name}}" perderá el acceso de inmediato. Esto no se puede deshacer.`,cancel:`Cancelar`,confirm:`Revocar`},create:{scopeLabel:`Alcance`,hintCameraStream:`Un token de transmisión de cámara solo puede obtener transmisiones e instantáneas. Úsalo para Home Assistant, Frigate o cualquier cosa que incruste una sola cámara.`,hintCamWall:`Un token de muro de cámaras abre /camwall en una pantalla sin iniciar sesión. Puede ver el nombre y el estado de cada impresora, y sus transmisiones de cámara. No puede ver nombres de archivo, direcciones ni códigos de acceso.`,hintOverlay:`Un token de superposición de streaming abre /overlay/{printerId} en una pantalla sin iniciar sesión, para OBS o cualquier transmisión en vivo. Puede ver la transmisión de la cámara de una impresora y su estado de impresión en vivo, incluido el nombre de archivo que aparece en pantalla. No puede ver direcciones ni códigos de acceso.`,title:`Crear nuevo token`,nameLabel:`Nombre del token`,namePlaceholder:`p. ej. Home Assistant`,daysLabel:`Días hasta la caducidad`,submit:`Crear`,hint:`La vida útil máxima es de 365 días. El valor del token se muestra solo una vez al crearlo — cópielo ahora.`},created:{camWallUrlTitle:`Dirección del muro de cámaras para esta pantalla`,camWallUrlHint:`Abre esta dirección en la pantalla. Cualquiera que pueda leerla puede ver el muro, así que trátala como una llave: revoca el token para dejar la pantalla sin acceso.`,overlayUrlTitle:`Dirección de superposición para OBS`,overlayUrlHint:`Agrega esto como Fuente de navegador en OBS. Cambia el número de /overlay/1 por el número de tu impresora (de su dirección en la página Impresoras). Cualquiera que pueda leer la dirección puede ver la transmisión, así que trátala como una llave: revoca el token para cortar el acceso.`,title:`Token creado — cópielo ahora`,warning:`Esta es la única vez que este token estará visible. Después de cerrar este diálogo no podrá volver a verlo nunca.`,copy:`Copiar`,dismiss:`Lo he guardado`},list:{scope:`Alcance`,myTitle:`Mis tokens`,allTitle:`Todos los usuarios (vista de administración)`,empty:`Aún no hay tokens.`,name:`Nombre`,owner:`Propietario`,prefix:`Prefijo`,created:`Creado`,expires:`Caduca`,lastUsed:`Usado por última vez`,revoke:`Revocar`,expired:`Caducado`},toast:{created:`Token creado`,createFailed:`Error al crear el token`,revoked:`Token revocado`,revokeFailed:`Error al revocar el token`,loadFailed:`Error al cargar los tokens`,copied:`Copiado al portapapeles`,copyFailed:`Error al copiar — selecciónelo y cópielo manualmente`}},forecast:{title:`Previsión`,noSpools:`No se encontraron bobinas activas. Añada bobinas a su inventario para ver los datos de previsión.`,noUsageData:`No hay datos de uso disponibles — no se puede proyectar la cronología de existencias.`,sku:`SKU`,material:`Material`,stock:`Existencias`,dailyRate:`Tasa`,daysLeft:`Días restantes`,emptyBy:`Se agota el`,reorderBy:`Reabastecer antes del`,actions:`Acciones`,trend:`Tendencia`,estimated:`Est.`,noData:`Sin datos`,timeframe:`Periodo`,chartTitle:`Existencias previstas — Los 5 materiales principales`,dashedLinesROP:`Líneas discontinuas = puntos de reabastecimiento`,stockLevel:`Nivel de existencias`,reorderPoint:`Punto de reabastecimiento`,safetyMargin:`Margen de seguridad`,trendLegend:`Tendencia (basada en el historial, nivel de servicio del 95%)`,estimatedLegend:`Estimada (diferencia de peso)`,noDataLegend:`Sin datos`,ropLabel:`PR`,ssLabel:`ES`,safetyStockLegend:`Existencias de seguridad`,stockArrivalLegend:`Llegada de existencias`,stockoutLegend:`Rotura de existencias`,alertCount_one:`{{count}} alerta`,alertCount_other:`{{count}} alertas`,order:`Pedir`,save:`Guardar`,cancel:`Cancelar`,settingsSaved:`Ajustes guardados`,failedSaveSettings:`Error al guardar los ajustes`,globalLeadTimeSaved:`Plazo de entrega global guardado`,globalLeadTime:`Plazo de entrega global`,globalLeadTimeHint:`Mínimo del plazo de entrega global — se usa en el cálculo del punto de reabastecimiento para todos los SKU`,skuLeadTimeOverride:`Anulación del plazo de entrega del SKU`,skuLeadTimeHint:`0 = usar el plazo de entrega global. Establezca >0 para anularlo para este SKU.`,safetyMarginLabel:`Margen de seguridad`,effectiveLeadTime:`Plazo de entrega efectivo`,effectiveLeadTimeHint:`máx(global {{global}} d, SKU {{sku}} d)`,reorderPointHint:`d̄ × PE + margen de seguridad — pida cuando las existencias alcancen este nivel`,safetyMarginHint:`Existencias de seguridad estadísticas (z=1,65 × σ × √PE) + margen definido por el usuario`,safetyMarginHintDays:`Margen añadido sobre las existencias de seguridad estadísticas.{{approx}}`,safetyMarginHintDaysApprox:` ≈ {{g}} g a la tasa actual.`,safetyMarginHintG:`Margen de peso fijo añadido sobre las existencias de seguridad estadísticas.{{approx}}`,safetyMarginHintGApprox:` ≈ {{days}} d a la tasa actual.`,individualSpools:`Bobinas individuales`,labelWeight:`Etiqueta`,spoolCount_one:`{{count}} bobina`,spoolCount_other:`{{count}} bobinas`,stockBreakRisk:`Riesgo de rotura de existencias`,stockBreakDetail:`Quedan {{days}} d, plazo de entrega {{lt}} d.`,stockBreakBefore:`Rotura de existencias antes del reabastecimiento`,reorderNow:`Reabastecer ahora`,reorderTriggerPassed:`La fecha de activación {{date}} ha pasado.`,shoppingList:`Lista de la compra`,shoppingListItems_one:`({{count}} artículo)`,shoppingListItems_other:`({{count}} artículos)`,shoppingListEmpty:`La lista de la compra está vacía. Haga clic en el icono del carrito de cualquier fila para añadir artículos.`,addToCart:`Añadir a la lista de la compra`,alertsSnoozed:`Silenciar las alertas de este SKU`,alertsEnabled:`Reactivar las alertas de este SKU`,addedToCart:`Añadido a la lista de la compra`,failedAddItem:`Error al añadir el artículo`,listView:`Lista`,logisticsView:`Logística`,qty:`Cant.`,weight:`Peso`,leadTime:`Plazo de entrega`,expectedRestock:`Reabastecimiento previsto`,status:`Estado`,note:`Nota`,pending:`Pendiente`,purchased:`Comprado`,received:`Recibido`,markPurchased:`Marcar como comprado`,markReceived:`Marcar como recibido — añade bobinas al inventario de existencias`,resetToPending:`Restablecer a pendiente`,remove:`Quitar`,clearAll:`Borrar todo`,downloadCsv:`CSV`,addToCartTitle:`Añadir a la lista de la compra`,byQuantity:`Por cantidad`,byDuration:`Por duración`,numberOfSpools:`Número de bobinas`,lastHowManyDays:`¿Cuántos días debería durar?`,noUsageQty:`No hay datos de uso — cantidad establecida en 1.`,noteOptional:`Nota (opcional)`,notePlaceholder:`p. ej. para el proyecto X, urgente…`,addNSpools_one:`Añadir {{count}} bobina`,addNSpools_other:`Añadir {{count}} bobinas`,onArrival:`A la llegada`,stockBreakIn:`Rotura de existencias en {{days}} d.`,stockRunsOutBefore:`Las existencias se agotan antes de que transcurra el plazo de entrega de {{lt}} d.`,atRate:`A {{rate}} g/día necesita`,moreSpools_one:`{{count}} bobina más`,moreSpools_other:`{{count}} bobinas más`,bridgeGap:`para cubrir el déficit.`,noReadAccess:`No tiene permiso para ver las previsiones de inventario.`,noWriteAccess:`No tiene permiso para modificar los ajustes de previsión.`}}},fr:{translation:{nav:{printers:`Imprimantes`,archives:`Archives`,queue:`File d'attente d'impression`,stats:`Statistiques`,profiles:`Profils`,maintenance:`Maintenance`,projects:`Projets`,inventory:`Filament`,finance:`Finances`,files:`Gestionnaire de fichiers`,makerworld:`MakerWorld`,notifications:`Notifications`,settings:`Paramètres`,system:`Système`,collapseSidebar:`Réduire la barre latérale`,expandSidebar:`Développer la barre latérale`,update:`Mise à jour`,updateAvailable:`Mise à jour disponible : v{{version}}`,updateAvailableBanner:`La version {{version}} est disponible !`,viewUpdate:`Voir la mise à jour`,viewOnGithub:`Voir sur GitHub`,keyboardShortcuts:`Raccourcis clavier (?)`,switchToLight:`Passer au mode clair`,switchToDark:`Passer au mode sombre`,switchToSystem:`Passer au mode système`,smartSwitches:`Interrupteurs intelligents`,logout:`Déconnexion`,installApp:`Installer l'application`,installAppSuccess:`Bambuddy a été installé`},common:{plusNMore:`+{{count}} autres`,save:`Enregistrer`,saving:`Enregistrement...`,cancel:`Annuler`,delete:`Supprimer`,edit:`Modifier`,add:`Ajouter`,close:`Fermer`,confirm:`Confirmer`,loading:`Chargement...`,error:`Erreur`,errorLoading:`Erreur de chargement`,retry:`Réessayer`,success:`Succès`,warning:`Avertissement`,enabled:`Activé`,disabled:`Désactivé`,yes:`Oui`,no:`Non`,on:`On`,off:`Désactivé`,all:`Tous`,none:`Aucun`,search:`Rechercher`,filter:`Filtrer`,sort:`Trier`,refresh:`Actualiser`,download:`Télécharger`,upload:`Téléverser`,uploading:`Téléversement...`,uploadFailed:`Échec du téléversement`,actions:`Actions`,status:`Statut`,name:`Nom`,description:`Description`,date:`Date`,time:`Heure`,hours:`heures`,minutes:`minutes`,seconds:`secondes`,days:`jours`,enable:`Activer`,disable:`Désactiver`,permissions:`Autorisations`,noPrinters:`Aucune imprimante configurée`,noData:`Aucune donnée disponible`,linkNotFound:`Lien non trouvé`,required:`Requis`,optional:`Optionnel`,dismiss:`Ignorer`,apply:`Appliquer`,reset:`Réinitialiser`,export:`Exporter`,import:`Importer`,clear:`Effacer`,selectAll:`Tout sélectionner`,deselectAll:`Tout désélectionner`,noChange:`— Aucun changement —`,unchanged:`Inchangé`,unassigned:`Non assigné`,unknown:`Inconnu`,unknownError:`Erreur inconnue`,today:`Aujourd'hui`,tomorrow:`Demain`,asap:`Dès que possible`,overdue:`En retard`,now:`Maintenant`,collapse:`Réduire`,expand:`Développer`,previous:`Précédent`,next:`Suivant`,viewArchive:`Voir l'archive`,viewInFileManager:`Voir dans le gestionnaire de fichiers`,addedBy:`Ajouté par {{username}}`,prints:`impressions`,more:`+{{count}} de plus`,ascending:`Croissant`,descending:`Décroissant`,back:`Retour`,copy:`Copier`,copied:`Copié\xA0!`,printer:`Imprimante`,remove:`Retirer`,type:`Type`,print:`Imprimer`,rename:`Renommer`,move:`Déplacer`,create:`Créer`,duplicate:`Dupliquer`,left:`Gauche`,right:`Droite`,user:`Utilisateur`,run:`Exécuter`,running:`En cours d'exécution...`},finance:{allTypes:`Tous les types`,allCostCenters:`Tous les centres de coûts`,title:`Finances`,subtitle:`Portefeuille, transactions personnelles et centres de coûts`,noAccess:`Vous n'avez pas la permission d'accéder aux données financières.`,personalView:`Vue personnelle`,adminView:`Vue administrateur`,createCostCenter:`Créer un centre de coûts`,adjustWallet:`Ajuster le portefeuille`,addManualPrint:`Ajouter un tirage manuel`,manageMembers:`Gérer les membres du centre de coûts`,currentBalance:`Solde personnel`,transactions:`Opérations`,personalTransactions:`Transactions personnelles`,costCenters:`Centres de coûts`,availableForPrinting:`Disponible pour l'attribution d'impression`,costCenterName:`Nom`,budgetType:`Type de budget`,monthlyBudget:`Budget mensuel`,totalBudget:`Budget total`,noBudget:`Aucun budget`,create:`Créer`,selectUser:`Sélectionner un utilisateur`,transactionType:`Type`,amount:`Montant`,noCostCenter:`Aucun centre de coûts`,descriptionOptional:`Description (facultative)`,applyAdjustment:`Appliquer l'ajustement`,memberCanPrint:`Le membre peut imprimer`,addMember:`Ajouter un membre`,canPrint:`Peut imprimer`,noMembers:`Aucun membre assigné.`,editCostCenter:`Modifier le centre de coûts`,myCostCenters:`Mes centres de coûts`,costCentersHint:`Vérifier les limites budgétaires et garder les coûts sous contrôle`,noCostCenters:`Aucun centre de coûts trouvé.`,owner:`Propriétaire`,balance:`Solde du compte`,unlimited:`Illimité`,budgetPolicyHint:`Les soldes de compte servent au suivi des coûts. L’impression est limitée uniquement par le budget du centre de coûts sélectionné ; sans budget, elle est illimitée.`,budget:`Budget`,shared:`Partagé`,cannotEditPrivateCostCenter:`Les centres de coûts privés ne peuvent pas être modifiés ici`,recentTransactions:`Transactions récentes`,transactionsHint:`Filtrer par type et centre de coûts`,first:`Première`,prev:`Précédente`,next:`Suivante`,last:`Dernière`,pageNumberOf:`Page {{page}} sur {{total}}`,noTransactions:`Aucune transaction disponible.`,noTransactionsForFilter:`Aucune transaction ne correspond aux filtres sélectionnés.`,costCenter:`Centre de coûts`,balanceAfter:`Solde après`,userWithId:`Utilisateur #{{id}}`,partial:`Partiel`,editTransaction:`Modifier la transaction`,selectCostCenter:`Sélectionner un centre de coûts...`,costCenterRequired:`Veuillez sélectionner un centre de coûts`,amountExample:`p. ex. 4,00`,manualAdjustmentExample:`p. ex. Ajustement manuel`,userRequired:`Veuillez sélectionner un utilisateur`,amountInvalid:`Le montant doit être un nombre valide`,createdCostCenter:`Centre de coûts créé`,createCostCenterFailed:`Impossible de créer le centre de coûts`,transactionDeleted:`Transaction supprimée`,deleteTransactionFailed:`Impossible de supprimer la transaction`,transactionEdited:`Transaction mise à jour et ledger recalculé`,editTransactionFailed:`Impossible de modifier la transaction`,manualPrintCreated:`Frais de tirage manuel ajoutés et ledger recalculé`,manualPrintFailed:`Impossible de créer le tirage manuel`,memberSaved:`Membre enregistré`,memberSaveFailed:`Impossible d'enregistrer le membre`,memberRemoved:`Membre supprimé`,memberRemoveFailed:`Impossible de supprimer le membre`,costCenterNameRequired:`Le nom du centre de coûts est requis`,costCenterUpdated:`Centre de coûts mis à jour`,costCenterUpdateFailed:`Impossible de mettre à jour le centre de coûts`,confirmDeleteCostCenter:`Supprimer le centre de coûts « {{name}} » ?`,costCenterDeleted:`Centre de coûts supprimé`,costCenterDeleteFailed:`Impossible de supprimer le centre de coûts`,deleteTransactionConfirm:`Supprimer cette transaction ? Les soldes seront recalculés automatiquement.`,deposit:`Dépôt`,withdraw:`Retrait`,printCharge:`Frais d'impression`,deleteTransaction:`Supprimer la transaction`},printers:{addPreflight:{checking:`Vérification de la connexion...`,warning:`Certaines vérifications de connexion ont échoué. Cette imprimante pourrait apparaître hors ligne. Examinez les vérifications ci-dessous, corrigez ce que vous pouvez, ou enregistrez quand même.`,back:`Retour`,saveAnyway:`Enregistrer quand même`},title:`Imprimantes`,addPrinter:`Ajouter une imprimante`,editPrinter:`Modifier l'imprimante`,deletePrinter:`Supprimer l'imprimante`,printerName:`Nom de l'imprimante`,serialNumber:`Numéro de série`,ipAddress:`Adresse IP / Nom d'hôte`,accessCode:`Code d'accès`,model:`Modèle`,nozzleCount:`Nombre de buses`,autoArchive:`Auto-archivage`,status:{available:`Disponible`,idle:`Inactif`,printing:`Impression en cours`,paused:`En pause`,offline:`Hors ligne`,problem:`Problème`,error:`Erreur`,finished:`Terminé`,unknown:`Inconnu`},temperatures:{nozzle:`Buse`,bed:`Plateau`,chamber:`Chambre`},heaterHistory:{title:`Historique des chauffages`,openLabel:`Voir l'historique des chauffages`,nozzle:`Buse`,nozzle2:`Buse 2`,bed:`Plateau`,chamber:`Chambre`,error:`Échec du chargement de l'historique`,empty:`Aucune donnée enregistrée`},progress:`{{percent}}% terminé`,timeRemaining:`{{time}} restant`,deleteConfirm:`Êtes-vous sûr de vouloir supprimer "{{name}}" ?`,maintenanceOk:`Maintenance OK`,maintenanceWarning:`{{count}} avertissement`,maintenanceWarning_plural:`{{count}} avertissements`,maintenanceDue:`{{count}} échéance`,maintenanceDue_plural:`{{count}} échéances`,sort:{name:`Nom`,status:`Statut`,model:`Modèle`,location:`Emplacement`,eta:`Temps restant`,ascending:`Tri croissant`,descending:`Tri décroissant`},cardSize:{small:`Petites cartes`,medium:`Cartes moyennes`,large:`Grandes cartes`,extraLarge:`Très grandes cartes`},pageView:{openCamWallPage:`Ouvrir le mur de caméras en pleine page`,cards:`Cartes`,camWall:`Mur de caméras`},camWall:{page:{tokenRejected:`Ce lien du mur de caméras n'est plus valide. Le jeton a peut-être expiré ou été révoqué.`,loadFailed:`Impossible de charger les imprimantes.`},noPrinters:`Aucune imprimante à afficher`,noSignal:`Aucun signal`,live:`En direct`,snap:`Photo`,off:`Arrêt`,summary:`{{live}} en direct, {{snap}} captures, {{total}} au total`,layer:`Couche {{cur}}/{{total}}`,timeLeft:`{{time}} restantes`,statusMode:{off:`Arrêt`,compact:`Compact`,full:`Complet`},settings:{title:`Paramètres du mur de caméras`,maxLive:`Flux en direct max.`,maxLiveHint:`Combien de vignettes diffusent en direct à la fois. Les autres se rafraîchissent en captures.`,snapshotInterval:`Intervalle de capture (secondes)`,snapshotIntervalHint:`À quelle fréquence les vignettes hors direct récupèrent une nouvelle capture.`,statusOverlay:`Overlay de statut`,statusOverlayHint:`Compact : badge de statut seul. Complet : + progression, couche, temps restant.`}},hideOffline:`Masquer hors ligne`,nextAvailable:`Prochaine disponible`,powerOn:`Allumer`,offlinePrintersWithPlugs:`Imprimantes hors ligne avec prises connectées`,noPrintersConfigured:`Aucune imprimante configurée pour le moment`,search:`Rechercher des imprimantes...`,noSearchResults:`Aucune imprimante ne correspond à votre recherche ou à vos filtres`,filter:{allStatuses:`Tous les statuts`,allLocations:`Tous les emplacements`},toolbar:{filters:`Filtres`,view:`Vue`,actions:`Actions`},readyToPrint:`Prête à imprimer`,external:`Externe`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Supprimer les archives d'impression`,noLabel:`Pas d'étiquette`,printPreview:`Aperçu avant impression`,width:`Largeur`,height:`Hauteur`,noObjectsFound:`Aucun objet trouvé`,objectsLoadedOnPrintStart:`Les objets sont chargés au début de l'impression`,willBeSkipped:`Sera sauté`,name:`Nom`,serialCannotBeChanged:`Le numéro de série ne peut pas être modifié`,locationHelp:`Utilisé pour grouper les imprimantes et filtrer la file d'attente`,wifiSignal:{veryWeak:`Très faible`,weak:`Faible`,fair:`Moyen`,good:`Bon`,excellent:`Excellent`},maintenanceUpToDate:`Maintenance à jour - Cliquez pour voir`,maintenance:{title:`En maintenance`,subtitle:`Cette imprimante est en pause — non connectée, non éligible à la file d'attente, sans notifications.`,pillLabel:`Maintenance`,exitButton:`Quitter la maintenance`,menuEnter:`Activer le mode maintenance`,menuExit:`Quitter le mode maintenance`,toastEntered:`{{name}} est maintenant en mode maintenance`,toastExited:`{{name}} est de nouveau en ligne`,confirmMidPrintTitle:`Passer en mode maintenance pendant une impression ?`,confirmMidPrintMessage:`{{name}} est en cours d'impression. Le mode maintenance déconnectera MQTT et arrêtera le suivi de progression ainsi que les notifications de fin pour ce travail. Continuer ?`,editFieldLabel:`Mode maintenance`,editFieldHelp:`Quand activé, cette imprimante est mise en pause de MQTT, de la file d'attente et des notifications — utile pour les réparations, les installations Bambuddy parallèles ou une suspension temporaire.`},chamberLightOn:`Allumer la lumière de la chambre`,chamberLightOff:`Éteindre la lumière de la chambre`,files:`Fichiers`,browseFiles:`Parcourir les fichiers de l'imprimante`,autoOffAfterPrint:`Extinction auto après impression`,autoOffExecuted:`Extinction auto exécutée - rallumez pour réinitialiser`,hmsErrors:`Erreurs HMS`,viewHmsErrors:`Voir {{count}} erreur(s) HMS`,resume:`Reprendre`,pause:`Pause`,stop:`Arrêter`,camera:`Caméra`,skipObject:`Sauter l'objet`,reconnect:`Reconnecter`,forceRefresh:`Forcer l'actualisation`,forceRefreshSuccess:`Actualisation demandée`,mqttDebug:`Débogage MQTT`,printerInformation:`Informations imprimante`,copyToClipboard:`Copier`,copied:`Copié !`,state:`État`,wifiSignalLabel:`Signal WiFi`,developerMode:`Mode développeur`,enabled:`Activé`,disabled:`Désactivé`,addedOn:`Ajoutée le`,sdCard:`Carte SD`,inserted:`Insérée`,notInserted:`Non insérée`,totalPrintHours:`Heures d'impression`,activeNozzle:`Active : buse {{nozzle}}`,amsSwitchInletTooltip:`Sélecteur de chemin de filament IN-{{inlet}} ({{side}}) — alimente les deux buses`,nozzleRack:`Rack à buses`,nozzleDocked:`Rangée`,nozzleMounted:`Montée`,nozzleActive:`Actif`,nozzleIdle:`Inactive`,nozzleDiameter:`Diamètre`,nozzleType:`Type`,nozzleStatus:`Statut`,nozzleFilament:`Filament`,nozzleWear:`Usure`,nozzleMaxTemp:`Temp Max`,nozzleSerial:`Série`,nozzleHardenedSteel:`Acier Trempé`,nozzleStainlessSteel:`Acier Inoxydable`,nozzleTungstenCarbide:`Carbure de Tungstène`,nozzleFlow:`Débit`,nozzleHighFlow:`Haut débit`,nozzleStandardFlow:`Standard`,firmwareUpdate:`Mise à jour Firmware`,firmwareInstructions:`Sur l'écran de l'imprimante, allez dans`,firmwareNav:`Naviguez vers`,settings:`Paramètres`,firmware:`Micrologiciel`,discoverPrinters:`Découvrir les imprimantes`,searching:`Recherche...`,manualEntry:`Saisie manuelle`,addFromCloud:`Ajouter depuis le Cloud`,toast:{printerDeleted:`Imprimante supprimée`,missingSpoolAssignment:`Impression démarrée sur {{printer}}. Attribution de bobine manquante pour : {{slots}}`,killSwitchTriggered:`Le coupe-circuit de facturation a arrêté une impression non autorisée sur {{printer}} : {{filename}}`,billingChargeFailed:`La facturation de {{filename}} sur {{printer}} a échoué. La réservation budgétaire a été conservée ; consultez les journaux du serveur.`,assignmentVerified:`Filament chargé dans l'emplacement {{slot}} ({{printer}})`,assignmentVerifiedNoKprofile:`Emplacement {{slot}} sur {{printer}} chargé, mais le profil de calibration de débit (profil K) n'a pas été appliqué`,assignmentNotConfirmed:`Impossible de confirmer l'attribution de l'emplacement {{slot}} sur {{printer}} — vérifiez l'emplacement AMS`,printerAdded:`Imprimante ajoutée`,printerUpdated:`Imprimante mise à jour`,failedToDelete:`Échec de la suppression`,failedToAdd:`Échec de l'ajout`,connectionFailedNotAdded:`Connexion à l'imprimante impossible. Vérifiez l'IP, le numéro de série et le code d'accès, et confirmez que le mode LAN-only est activé. L'imprimante n'a pas été ajoutée.`,failedToUpdate:`Échec de la mise à jour`,commandSent:`Commande envoyée`,failedToSendCommand:`Échec de l'envoi de la commande`,turnedOn:`{{name}} allumée`,failedToPowerOn:`Échec de l'allumage de {{name}}`,scriptTriggered:`Script déclenché`,printStopped:`Impression arrêtée`,printPaused:`Impression en pause`,printResumed:`Impression reprise`,referenceDeleted:`Référence supprimée`,detectionAreaSaved:`Zone de détection enregistrée`,failedToRunScript:`Échec du script`,failedToStopPrint:`Échec de l'arrêt`,failedToPausePrint:`Échec de la mise en pause`,failedToResumePrint:`Échec de la reprise`,failedToControlChamberLight:`Échec du contrôle de la lumière`,failedToSetSpeed:`Échec du réglage de la vitesse`,failedToUpdateSetting:`Échec de mise à jour du paramètre`,failedToSkipObjects:`Échec du saut d'objets`,failedToRereadRfid:`Échec lecture RFID`,failedToCheckPlate:`Échec vérification plateau`,failedToUpdateLabel:`Échec mise à jour étiquette`,failedToDeleteReference:`Échec suppression référence`,failedToSaveDetectionArea:`Échec enregistrement zone`,plateCheckEnabled:`Vérification plateau activée`,plateCheckDisabled:`Vérification plateau désactivée`,calibrationSaved:`Calibration enregistrée !`,calibrationFailed:`Échec de la calibration`,rfidRereadInitiated:`Lecture RFID initiée`,loadInitiated:`Chargement du filament…`,unloadInitiated:`Déchargement du filament…`,failedToLoad:`Échec du chargement du filament`,failedToUnload:`Échec du déchargement du filament`},connection:{connected:`Connecté`,offline:`Hors ligne`},plateStatus:{markCleared:`Marquer le plateau comme dégagé`,cleared:`Plateau dégagé`,notCleared:`Plateau non dégagé`,inUse:`Plateau en cours d'utilisation`},queue:{inQueue:`{{count}} impression en file`,inQueue_plural:`{{count}} impressions en file`},controls:`Contrôles`,rfid:{reread:`Relire RFID`},ams:{load:`Charger`,unload:`Décharger`,feedTitle:`Charger {{slot}} vers quelle buse ?`,feedPrompt:`Le Filament Track Switch peut diriger cet emplacement vers les deux buses. Choisissez celle à alimenter.`,feedLeft:`Buse gauche`,feedRight:`Buse droite`,feedAlreadyLoaded:`Déjà chargé`,switchNotReady:`Le Filament Track Switch n'est pas encore configuré. Affectez chaque AMS à une entrée sur l'imprimante, puis réessayez.`},bedJog:{limitWarning:`Les limites de déplacement ne sont pas appliquées lors des mouvements manuels : un bug du firmware Bambu ignore les butées logicielles pour les commandes à distance. Déplacez avec précaution pour éviter une collision.`,title:`Commandes de déplacement`,bed:`Plateau`,step:`Pas (mm)`,up:`Monter le plateau`,down:`Descendre le plateau`,toolheadUp:`Monter la tête`,toolheadDown:`Descendre la tête`,disabledWhilePrinting:`Désactivé pendant l'impression`,notHomedTitle:`Imprimante non référencée`,notHomedMessage:`L'imprimante n'a pas été référencée depuis la dernière impression. Lancez la référence automatique d'abord pour un positionnement sûr (parque la tête d'outil, puis référence X, Y et Z), ou déplacez quand même — les butées logicielles seront ignorées.`,homeZ:`Référence automatique`,moveAnyway:`Déplacer quand même`,homingStarted:`Référencement automatique en cours…`},permission:{noAdd:`Pas d'autorisation pour ajouter`,noEdit:`Pas d'autorisation pour modifier`,noDelete:`Pas d'autorisation pour supprimer`,noControl:`Pas d'autorisation pour contrôler`,noFiles:`Pas d'autorisation pour les fichiers`,noAmsRfid:`Pas d'autorisation pour le RFID`,noSmartPlugControl:`Pas d'autorisation pour les prises`,noCamera:`Pas d'autorisation pour les caméras`},modal:{addTitle:`Ajouter une imprimante`,editTitle:`Modifier l'imprimante`,myPrinter:`Mon imprimante`,selectModel:`Choisir un modèle...`,locationGroup:`Emplacement / Groupe (optionnel)`,locationPlaceholder:`ex: Atelier, Bureau`,autoArchiveLabel:`Auto-archiver les impressions terminées`,fromPrinterSettings:`Depuis les paramètres imprimante`,modelOptional:`Modèle (optionnel)`,saveChanges:`Enregistrer les modifications`},skipObjects:{tooltip:`Sauter des objets`,onlyWhilePrinting:`Sauter (uniquement pendant l'impression)`,requiresMultiple:`Sauter (nécessite 2+ objets)`,title:`Sauter des objets`,matchIdsInfo:`Faites correspondre les IDs avec l'écran de l'imprimante`,printerShowsIds:`L'écran affiche les IDs des objets sur le plateau`,skipSelected:`Sauter la sélection`,skipping:`Saut en cours...`,noObjectsSelected:`Aucun objet sélectionné`,selectObjectsToSkip:`Sélectionnez les objets à ignorer`,skipped:`sauté`,objectsSkipped:`Objets sautés`,activeCount:`{{count}} actifs`,waitForLayer:`Attendez la couche 2 pour sauter des objets (actuelle : {{layer}})`,skip:`Sauter`,confirmTitle:`Sauter l'objet ?`,confirmMessage:`Voulez-vous vraiment sauter "{{name}}" ? Cette action est irréversible.`,confirmAllMessage:`Tous les objets restants sont sélectionnés. Cela arrêtera la tâche d’impression. Continuer ?`,confirmMultipleMessage:`Sauter {{count}} objets sélectionnés ? Cette action est irréversible.`},confirm:{deleteTitle:`Supprimer l'imprimante`,deleteMessage:`Supprimer "{{name}}" ? Cela retirera tous les paramètres de connexion.`,deleteArchivesNote:`Tout l'historique sera définitivement supprimé.`,keepArchivesNote:`L'historique sera conservé mais plus associé à cette imprimante.`,stopTitle:`Arrêter l'impression`,stopMessage:`Arrêter l'impression sur "{{name}}" ?`,stopButton:`Arrêter`,pauseTitle:`Mettre en pause`,pauseMessage:`Mettre en pause l'impression sur "{{name}}" ?`,pauseButton:`Pause`,resumeTitle:`Reprendre l'impression`,resumeMessage:`Reprendre l'impression sur "{{name}}" ?`,resumeButton:`Reprendre`,powerOnTitle:`Allumer l'imprimante`,powerOnMessage:`Allumer "{{name}}" ?`,powerOnButton:`Allumer`,powerOffTitle:`Éteindre l'imprimante`,powerOffMessage:`Éteindre "{{name}}" ?`,powerOffWarning:`ATTENTION : "{{name}}" imprime ! L'éteindre maintenant peut endommager l'imprimante.`,powerOffButton:`Éteindre`,haToggleTitle:`Basculer "{{name}}"`,haToggleMessage:`Basculer l'entité Home Assistant {{entity}} ? Cela peut couper l'alimentation si elle est actuellement activée.`,haToggleWarning:`ATTENTION : "{{name}}" imprime ! Basculer {{entity}} peut couper l'alimentation et interrompre l'impression. Continuer ?`,haToggleButton:`Basculer`},bulk:{select:`Sélectionner`,selectAll:`Tout sélectionner`,selectByLocation:`Sélectionner par emplacement`,selected:`{{count}} sélectionné(s)`,actions:{stop:`Arrêter`,pause:`Pause`,resume:`Reprendre`,clearPlate:`Vider le plateau`,clearHMS:`Effacer les notifications`},confirm:{stopTitle:`Arrêter {{count}} impressions`,stopMessage:`Cela annulera les impressions actives sur {{count}} imprimante(s). Cette action est irréversible.`,stopButton:`Tout arrêter`,pauseTitle:`Mettre en pause {{count}} impressions`,pauseMessage:`Cela mettra en pause les impressions actives sur {{count}} imprimante(s).`,pauseButton:`Tout mettre en pause`,clearPlateTitle:`Vider {{count}} plateaux`,clearPlateMessage:`Cela videra le plateau sur {{count}} imprimante(s) et pourrait lancer les travaux en file d'attente.`,clearPlateButton:`Tout vider`},success:`{{action}} terminé sur {{count}} imprimante(s)`,partial:`{{succeeded}} réussi(s), {{failed}} échoué(s)`,noneApplicable:`Aucune imprimante sélectionnée n'est dans le bon état pour cette action`,selectByState:`Sélectionner par état`},discovery:{title:`Découvrir les imprimantes`,searching:`Recherche...`,scanning:`Scan en cours...`,scanProgress:`Scan... {{scanned}}/{{total}}`,foundPrinters:`{{count}} imprimante(s) trouvée(s)`,noPrintersFound:`Aucune imprimante trouvée`,noPrintersFoundSubnet:`Aucune imprimante dans ce sous-réseau.`,noPrintersFoundNetwork:`Aucune imprimante sur le réseau.`,allConfigured:`Toutes les imprimantes trouvées sont déjà configurées.`,alreadyAdded:`Déjà ajoutée`,select:`Sélectionner`,manualEntry:`Saisie manuelle`,addFromCloud:`Ajouter depuis le Cloud`,subnetToScan:`Sous-réseau à scanner`,dockerNote:`Docker détecté. Entrez le sous-réseau en notation CIDR. Nécessite network_mode: host.`,scanSubnet:`Scanner le sous-réseau`,discoverNetwork:`Découvrir sur le réseau`,scanningSubnet:`Scan du sous-réseau pour imprimantes Bambu...`,scanningNetwork:`Scan du réseau...`,serialRequired:`Série requis`,unknown:`Inconnu`,failedToStart:`Échec du démarrage de la découverte`,customSubnetOption:`Sous-réseau personnalisé...`,customSubnetLabel:`Sous-réseau personnalisé (CIDR)`,customSubnetNote:`Utilisez un sous-réseau personnalisé si votre imprimante se trouve sur un réseau différent de celui de ce serveur. Les ports FTP (990) et MQTT (8883) doivent être accessibles à travers la limite de routage.`},drying:{start:`Démarrer le séchage`,stop:`Arrêter le séchage`,temperature:`Température`,duration:`Durée`,hours:`heures`,timeRemaining:`{{time}} restant`,active:`Séchage`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`Séchage non pris en charge`,powerRequired:`Brancher l'adaptateur secteur AMS pour activer le séchage`,cannotDryNow:`L'AMS ne peut pas démarrer le séchage pour le moment`,startingDrying:`Démarrage du séchage...`,toastCommandSent:`Commande de séchage envoyée`,toastStopped:`Séchage arrêté`,toastNotStarted:`L'imprimante a accepté la commande, mais l'AMS n'a pas démarré le séchage. Vérifiez que l'adaptateur secteur de l'AMS est branché et que l'imprimante est inactive.`,screenOnly:`Sur cette imprimante, le séchage de l'AMS ne peut être commandé que depuis l'écran de l'imprimante (limitation de Bambu)`,stoppingDrying:`Arrêt du séchage...`,rotateTray:`Tourner la bobine pendant le séchage`,rotateUnavailableReason:`Indisponible — un emplacement de cet AMS est chargé vers la tête d'impression. La bobine est bloquée par le tube d'alimentation et ne peut pas tourner. Rétractez d'abord le filament.`,startMode:`Heure de démarrage`,modeNow:`Maintenant`,modeDelay:`Après un délai`,modeAtTime:`À une heure`,schedule:`Planifier`,scheduledFor:`Séchage planifié pour {{time}}`,scheduledAsap:`Séchage planifié (en attente de l'imprimante)`,cancelScheduled:`Annuler le séchage planifié`,scheduleFailed:`Échec de la planification du séchage`,retractFilament:`Rétractez le filament à la sortie de l'AMS pour démarrer le séchage`,waitingAmsNotFound:`En attente de la détection de l'AMS`,waitingOffline:`En attente de la connexion de l'imprimante`,waitingPrinterBusy:`En attente de la disponibilité de l'imprimante`,waitingAlreadyDrying:`En attente de la fin du cycle de séchage en cours`,waitingInterrupted:`Interrompu, reprendra lorsque l'imprimante sera libre`,scheduleFailedReason:`Échec du séchage planifié : {{reason}}`,scheduleFailedUnknown:`Erreur inconnue`,dismissFailed:`Masquer`},amsBackup:{titleOn:`AMS Filament Backup est ACTIVÉ. Cliquez pour désactiver.`,titleOff:`AMS Filament Backup est DÉSACTIVÉ. Cliquez pour activer.`,titleUnknown:`État de l'AMS Filament Backup indisponible sur cette imprimante.`,toastEnabled:`AMS Filament Backup activé`,toastDisabled:`AMS Filament Backup désactivé`,modalTitle:`AMS Filament Backup`,modalHelp:`Lorsque l'emplacement actif s'épuise, l'imprimante passe aux emplacements ayant le même preset et la même couleur dans cet ordre.`,modalNoSlots:`Aucun filament chargé.`,modalNoPairs:`Aucune paire de secours — aucun emplacement ne partage à la fois preset et couleur.`,extruderRightShort:`D`,extruderLeftShort:`G`,stateOn:`Activé`,stateOff:`Désactivé`,stateUnknown:`Non pris en charge par cette imprimante`},activeJobSlot:{title:`Cet emplacement est le filament {{n}} dans l'impression active`,ariaLabel:`Emplacement d'impression active {{n}}`},expectedSlot:{title:`L'imprimante attend du filament dans cet emplacement`,ariaLabel:`Emplacement de filament attendu {{n}}`,label:`{{ams}} · Emplacement {{slot}}`,external:`Bobine externe`},filaments:`Filaments`,externalSpool:{hide:`Masquer la bobine externe`,show:`Afficher la bobine externe`},openCameraOverlay:`Ouvrir la caméra en superposition`,openCameraWindow:`Ouvrir la caméra dans une fenêtre`,firmwareUpdateAvailable:`Mise à jour firmware : {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — À jour`,firmwareUpdateButton:`Mettre à jour`,plateDetection:{noPermission:`Pas d'autorisation de modification`,enabledClick:`Vérification activée - Cliquez pour désactiver`,disabledClick:`Vérification désactivée - Cliquez pour activer`,manageCalibration:`Gérer la calibration de détection`,calibrationRequired:`Calibration requise`,calibrationInstructions:`Videz le plateau, puis cliquez sur Calibrer.`,calibrationDescription:`Capture une image de référence du plateau vide.`,calibrationTip:`Conseil : Stockez jusqu'à 5 références. Le système utilise la meilleure correspondance.`,plateEmpty:`Le plateau semble vide`,objectsDetected:`Objets détectés sur le plateau`,confidence:`Confiance`,difference:`Différence`,analysisPreview:`Aperçu de l'analyse :`,analysisLegend:`Cadre vert = zone, Rouge = différences`,savedReferences:`Références ({{count}}/{{max}})`,deleteReference:`Supprimer la référence`,labelPlaceholder:`Étiquette...`,clickToEdit:`{{label}} - Modifier`,clickToAddLabel:`Ajouter une étiquette`},speed:{title:`Vitesse d'impression`,silent:`Silencieux (50%)`,standard:`Standard (100%)`,sport:`Sport (124%)`,ludicrous:`Ludicrous (166%)`},airduct:{title:`Mode conduit d'air`,cooling:`Refroidissement`,heating:`Chauffage`},noSdCard:`Pas de SD`,door:{open:`Ouverte`,closed:`Fermée`},fans:{partCooling:`Ventilateur pièce`,auxiliary:`Ventilateur auxiliaire`,leftAuxiliary:`Ventilateur auxiliaire gauche`,exhaust:`Extraction`,chamber:`Ventilateur chambre`},clickToViewHmsErrors:`Cliquez pour voir les erreurs HMS`,aiDetection:{safe:`Sûr`,warning:`Avertissement`,failure:`Échec`,idle:`Inactif`,error:`Ne vérifie pas`,unknown:`Démarrage`,tooltipError:`La détection d'échec par IA ne vérifie pas cette impression : {{reason}} - cliquez pour les détails`,tooltipUnknown:`Détection d'échec par IA : en attente du premier résultat - cliquez pour les détails`,errorHint:`Cette impression n'est pas vérifiée. La détection reprendra automatiquement une fois le problème ci-dessous résolu.`,tooltip:`Détection d'échec par IA : {{status}} (score {{score}}) - cliquez pour les détails`,tooltipIdle:`Détection d'échec par IA activée - la surveillance démarre à la prochaine impression - cliquez pour les détails`,modalTitle:`Détection d'échec par IA - {{name}}`,currentStatus:`Statut`,score:`Score`,framesAnalyzed:`Images analysées`,idleHint:`Aucune impression n'est surveillée actuellement. La surveillance démarre automatiquement à la prochaine impression.`,lastError:`Dernière erreur`,openSettings:`Ouvrir les paramètres`},estimatedCompletion:`Fin estimée`,plateNumber:`Plaque {{number}}`,slotOptions:`Options du slot`,amsPopup:{friendlyName:`Nom AMS`,friendlyNamePlaceholder:`ex. Nom convivial AMS`,serialNumber:`Numéro de série`,firmwareVersion:`Micrologiciel`,save:`Enregistrer`,clear:`Effacer`,noEditPermission:`Vous n'avez pas la permission de renommer les unités AMS`},firmwareModal:{title:`Mise à jour Firmware`,titleUpToDate:`Infos Firmware`,currentVersion:`Actuelle :`,latestVersion:`Dernière :`,releaseNotes:`Notes de version`,checkingPrereqs:`Vérification des prérequis...`,sdCardReady:`Carte SD prête. Cliquez pour téléverser.`,uploadedSuccess:`Firmware téléversé !`,applyInstructions:`Pour appliquer sur l'imprimante :`,step1:`Sur l'écran, allez dans Paramètres`,step2:`Allez dans Firmware`,step3:`Sélectionnez "Mettre à jour depuis carte SD"`,step4:`Prévoyez 10-20 minutes`,done:`Terminé`,starting:`Démarrage...`,uploadFirmware:`Téléverser le Firmware`,uploadFailed:`Échec du téléversement : {{error}}`,uploadedToast:`Firmware téléversé ! Lancez la mise à jour sur l'écran.`,availableVersions:`Versions disponibles`,usable:`Utilisable`,unavailable:`Indisponible`,installed:`Installé`,newerBadge:`plus récent`,olderBadge:`plus ancien`,currentBadge:`actuel`},accessCodePlaceholder:`Laissez vide pour garder l'actuel`,roi:{title:`Zone de détection (ROI)`,xStart:`Début X`,yStart:`Début Y`,width:`Largeur`,height:`Hauteur`,instruction:`Ajustez le cadre vert pour cibler le plateau.`},developerModeWarning:`Le mode développeur LAN n'est pas activé sur : {{names}}. Certaines fonctionnalités peuvent ne pas fonctionner.`,howToEnable:`Comment activer`,incompatibleFile:`Ce fichier a été tranché pour {{slicedFor}}, mais cette imprimante est une {{printerModel}}`,dropNotPrintable:`Seuls les fichiers .gcode et .gcode.3mf peuvent être imprimés`,dropToPrint:`Déposer pour imprimer`,dropToQueue:`Déposer pour mettre en file`},archives:{media:{title:`Vidéos d’impression`,download:`Télécharger les vidéos d’impression`,searching:`Recherche de vidéos sur l’imprimante…`,searchFailed:`Impossible de rechercher les vidéos sur l’imprimante.`,none:`Aucun timelapse ni segment de caméra IP n’a été trouvé pour cette impression.`,attachedTimelapse:`Timelapse joint`,printerFiles:`Fichiers encore présents sur l’imprimante`,downloadSelected:`Télécharger la sélection`,printerMissing:`L’imprimante n’est plus configurée`,timelapseUnavailable:`Impossible de lire le dossier des timelapses`,ipcamUnavailable:`Impossible de lire le dossier de la caméra IP`},title:`Archives d'impression`,no3mfBanner:{title:`Certaines impressions récentes n'ont pas pu être archivées avec leur miniature`,body:`Le slicer n'a pas laissé le fichier .gcode.3mf sur la carte SD de l'imprimante, donc Bambuddy n'a pas pu récupérer la miniature ni les métadonnées slicer. C'est généralement parce que « Stocker les fichiers envoyés sur stockage externe » est désactivé dans le slicer (onglet Périphérique de Bambu Studio / OrcaSlicer).`,docsLink:`Voir l'étape 4 de l'installation`,docsLinkInternalStorage:`Pourquoi cela arrive`,titleInternalStorage:`Certaines impressions récentes sont restées dans le stockage interne de l'imprimante`,bodyInternalStorage:`Bambu Studio a placé le fichier tranché dans le stockage interne de l'imprimante au lieu de la carte, Bambuddy n'avait donc rien à lire en FTP. Sur les séries H2, P2S et X2D, son bouton « Imprimer » le fait toujours : seul « Envoyer » propose un choix, et il est lui aussi réglé sur « Cache » par défaut. Ces impressions restent archivées avec leur nom et leurs durées, simplement sans miniature ni métadonnées slicer. Pour des archives complètes, lancez l'impression depuis Bambuddy ou tranchez dans OrcaSlicer, ou bien dans Bambu Studio utilisez « Envoyer » avec « Externe » puis lancez l'impression. Toutes nécessitent une carte ou une clé dans l'imprimante.`,titleNoExternalStorage:`Certaines impressions récentes n'ont pas pu être archivées — aucun stockage dans l'imprimante`,bodyNoExternalStorage:`L'imprimante ne signale ni carte ni clé dans son emplacement, le fichier tranché n'avait donc nulle part où atterrir et Bambuddy rien à lire. Insérez-en une et la prochaine impression sera archivée complètement.`,titleInternalHistory:`Certaines impressions récentes ont été lancées depuis un fichier déjà présent sur l'imprimante`,bodyInternalHistory:`Ces impressions sont parties de la bibliothèque de l'imprimante elle-même : une réimpression depuis son écran, un lancement depuis Handy, ou un fichier envoyé plus tôt et imprimé ensuite. Bambuddy lit les fichiers d'impression en FTP, qui ne dessert que la carte ou la clé, tandis que l'imprimante conserve cette bibliothèque dans une zone que le FTP n'atteint pas : il n'y avait donc aucun 3MF à lire. Aucun réglage du trancheur n'y change quoi que ce soit, puisque rien n'a été envoyé pour ces impressions. Elles restent archivées avec leur nom et leurs durées, et « Modifier l'archive » permet de saisir à la main le filament utilisé. Pour une archive complète, lancez plutôt l'impression depuis Bambuddy ou depuis votre trancheur.`,titleFtpsCooloff:`Certaines impressions récentes n'ont pas pu être archivées — l'imprimante a refusé la connexion de fichiers`,bodyFtpsCooloff:`Bambuddy a ouvert le port de transfert de fichiers de l'imprimante (FTPS 990) et celle-ci a répondu par autre chose que du TLS, si bien que rien n'a pu en être lu. Ces impressions restent archivées avec leur nom et leurs durées, simplement sans vignette ni métadonnées du trancheur. Ce n'est pas un réglage du trancheur ni quelque chose que vous avez modifié — les mêmes modèles et les mêmes firmwares fonctionnent normalement sur d'autres installations, et une imprimante touchée refonctionne généralement d'elle-même plus tard. Après un tel échec, Bambuddy suspend les transferts vers cette imprimante pendant cinq minutes puis revient chercher le fichier une fois la pause terminée : un épisode bref se répare donc tout seul, tandis qu'une fiche encore vide signifie que le refus a duré plus longtemps que la nouvelle tentative. On ignore encore ce qui le déclenche. Si cela se reproduit, activez la journalisation de débogage sur la page Système et joignez un paquet de support à votre signalement.`,titleFtpTransferFailed:`Certaines impressions récentes n'ont pas pu être archivées : le transfert du fichier a dépassé le temps imparti`,bodyFtpTransferFailed:`Le fichier tranché se trouvait sur la carte de l'imprimante et l'imprimante l'a bien servi, mais le transfert ne s'est pas terminé dans le temps imparti. Au démarrage d'une impression, l'imprimante gère aussi sa caméra, ses messages d'état et l'envoi du travail, et un gros 3MF ne passe pas toujours face à tout cela. Ces impressions restent archivées avec leur nom et leurs durées, simplement sans miniature ni métadonnées du trancheur. Ce n'est pas un réglage du trancheur ni quelque chose que vous avez modifié. Bambuddy revient chercher le fichier trois fois au cours des dix minutes suivantes, la plupart de ces cas se règlent donc d'eux-mêmes ; une carte toujours vide signifie que chacune de ces tentatives a également dépassé le temps imparti. Si cela se reproduit, augmentez Délai de connexion dans Paramètres > Réseau > Nouvelle tentative FTP.`,dismissLabel:`Ignorer ce message`},searchPlaceholder:`Chercher dans les archives...`,filterByPrinter:`Par imprimante`,filterByStatus:`Par statut`,sortBy:`Trier par`,sortNewest:`Plus récent`,sortOldest:`Plus ancien`,sortName:`Nom`,sortDuration:`Durée`,sortLargest:`Plus volumineux`,sortSmallest:`Plus léger`,sortSize:`Taille`,noArchives:`Aucune archive trouvée`,noArchivesSearch:`Aucune archive ne correspond`,originalPrintNotVisible:`Impression d'origine non visible - essayez d'effacer les filtres`,noArchivesYet:`Pas encore d'archive`,prints:`impressions`,pagination:{showing:`Affichage`,to:`à`,of:`sur`,show:`Afficher`,page:`Page`,all:`Tout`},loadingArchives:`Chargement...`,releaseToUpload:`Relâcher pour téléverser`,showAll:`Tout afficher`,showFavoritesOnly:`Favoris uniquement`,gridView:`Grille`,listView:`Liste`,calendarView:`Calendrier`,logView:`Journal d'impression`,manageTags:`Gérer les tags`,showFailedPrints:`Afficher les échecs`,hideFailedPrints:`Masquer les échecs`,hideDuplicates:`Masquer les doublons`,viewOriginalPrint:`Cliquez pour afficher l'impression originale (#{{id}})`,printTime:`Temps d'impression`,filamentUsed:`Filament utilisé`,cost:`Coût`,preview:`Aperçu`,deleteArchive:`Supprimer l'archive`,deleteConfirm:`Supprimer cette archive ?`,favorite:`Favori`,unfavorite:`Retirer des favoris`,viewDetails:`Détails`,status:{completed:`Réussi`,failed:`Échoué`,stopped:`Arrêté`},toast:{source3mfAttached:`Source 3MF attachée : {{filename}}`,failedUploadSource3mf:`Échec téléversement 3MF`,source3mfRemoved:`Source 3MF retirée`,failedRemoveSource3mf:`Échec retrait 3MF`,f3dAttached:`F3D attaché : {{filename}}`,failedUploadF3d:`Échec téléversement F3D`,f3dRemoved:`F3D retiré`,failedRemoveF3d:`Échec retrait F3D`,timelapseAttached:`Timelapse attaché : {{filename}}`,timelapseAlreadyAttached:`Timelapse déjà présent`,noMatchingTimelapse:`Pas de timelapse correspondant`,failedScanTimelapse:`Échec scan timelapse`,failedAttachTimelapse:`Échec attache timelapse`,timelapseRemoved:`Timelapse supprimé`,failedRemoveTimelapse:`Échec de la suppression du timelapse`,timelapseUploaded:`Timelapse importé : {{filename}}`,failedUploadTimelapse:`Échec de l'importation du timelapse`,archiveDeleted:`Archive supprimée`,failedDeleteArchive:`Échec suppression`,addedToFavorites:`Ajouté aux favoris`,removedFromFavorites:`Retiré des favoris`,projectUpdated:`Projet mis à jour`,failedUpdateProject:`Échec mise à jour projet`,linkCopied:`Lien copié`,failedCopyLink:`Échec copie lien`,photoDeleted:`Photo supprimée`,failedDeletePhoto:`Échec suppression photo`,failedDeleteArchives:`Échec suppression archives`,failedUpdateFavorites:`Échec mise à jour favoris`,exportDownloaded:`Export téléchargé`,exportFailed:`Échec export`},menu:{print:`Imprimer`,openInBambuStudio:`Ouvrir dans le Slicer`,slice:`Découper`,externalLink:`Lien externe`,viewOnMakerWorld:`Voir sur MakerWorld`,preview3d:`Aperçu 3D`,viewTimelapse:`Voir le Timelapse`,scanForTimelapse:`Scanner pour Timelapse`,uploadTimelapse:`Importer un timelapse`,removeTimelapse:`Supprimer le timelapse`,downloadSource3mf:`Télécharger Source 3MF`,uploadSource3mf:`Téléverser Source 3MF`,replaceSource3mf:`Remplacer Source 3MF`,removeSource3mf:`Retirer Source 3MF`,uploadF3d:`Téléverser F3D`,replaceF3d:`Remplacer F3D`,downloadF3d:`Télécharger F3D`,removeF3d:`Retirer F3D`,download:`Télécharger`,copyDownloadLink:`Copier lien de téléchargement`,qrCode:`Code QR`,viewPhotos:`Voir les photos`,viewPhotosCount:`Voir les photos ({{count}})`,projectPage:`Page du Projet`,addToFavorites:`Ajouter aux favoris`,removeFromFavorites:`Retirer des favoris`,edit:`Modifier`,printLog:`Journal d'impression`,goToProject:`Aller au Projet : {{name}}`,addToProject:`Ajouter au Projet`,removeFromProject:`Retirer du Projet`,loading:`Chargement...`,noProjectsAvailable:`Aucun projet disponible`,searchProjects:`Rechercher des projets…`,select:`Sélectionner`,deselect:`Désélectionner`,delete:`Supprimer`},permission:{noReprint:`Pas d'autorisation de réimpression`,noAddToQueue:`Pas d'autorisation pour la file`,noUpdateArchives:`Pas d'autorisation de mise à jour`,noUploadFiles:`Pas d'autorisation de téléversement`,noDownload:`Pas d'autorisation de téléchargement`,noCopyLink:`Pas d'autorisation de copie lien`,noDelete:`Pas d'autorisation de suppression`,noEdit:`Pas d'autorisation de modification`,noCreate:`Pas d'autorisation de création`},platePicker:{title:`Choisir une plaque à prévisualiser`,hint:`Cette archive contient plusieurs plaques. Sélectionnez-en une pour l'ouvrir dans la visionneuse GCode.`,plateLabel:`Plaque {{index}}`,objectCount:`{{count}} objet`,objectCount_plural:`{{count}} objets`,noGcode:`Cette archive ne contient pas de G-code généré à prévisualiser. Ouvrez-la d'abord dans Bambu Studio pour la trancher.`},card:{previousPlate:`Plateau précédent`,nextPlate:`Plateau suivant`,plateNumber:`Plateau {{index}}`,moreOptions:`Clic droit pour plus d'options`,addToFavorites:`Ajouter aux favoris`,removeFromFavorites:`Retirer des favoris`,cancelled:`annulé`,failed:`échoué`,duplicate:`doublon`,duplicateTitle:`Ce modèle a déjà été imprimé`,openSource3mf:`Ouvrir 3MF dans Bambu Studio (clic droit pour plus)`,downloadF3d:`Télécharger fichier Fusion 360`,viewTimelapse:`Voir timelapse`,viewPhoto:`Voir 1 photo`,viewPhotos:`Voir {{count}} photos`,openFolder:`Ouvrir le dossier : {{name}}`,slicedFile:`Fichier découpé - prêt`,sourceFile:`Fichier source uniquement - pas de mapping AMS`,gcode:`GCODE`,source:`SOURCE`,project:`Projet : {{name}}`,runsBadge:`{{count}} impressions`,runsBadgeTitle:`{{count}} impressions au total — {{successful}} réussies, {{failed}} échouées. Cliquez pour voir le journal complet.`,estimated:`Estimé : {{time}}`,actual:`Réel : {{time}}`,accuracy:`Précision : {{percent}}%`,filament:`{{weight}} g`,layer:`{{count}} couche`,layers:`{{count}} couches`,object:`{{count}} objet`,objects:`{{count}} objets`,slicedFor:`Découpé pour {{model}}`,uploadedBy:`Téléversé par`,noPermissionReprint:`Pas d'autorisation de réimpression`,noFileForReprint:`Aucun fichier 3MF disponible — le fichier n'a pas pu être téléchargé depuis l'imprimante lors de l'enregistrement`,slicerAmsMapping:`Mappage AMS enregistré ({{printer}})`,slicerAmsMappingTooltip:`Le choix d'emplacement AMS du slicer a été enregistré pour {{printer}}. Les numéros d'emplacement n'ont de sens que sur cette imprimante : une réimpression ne les réutilise donc que si elle vise à nouveau {{printer}}.`,noPermissionEdit:`Pas d'autorisation de modification`,noPermissionDelete:`Pas d'autorisation de suppression`,openInBambuStudio:`Ouvrir dans le Slicer`,openInBambuStudioToSlice:`Ouvrir dans le Slicer pour découper`,slice:`Découper`,externalLink:`Lien externe`,makerWorld:`MakerWorld : {{designer}}`,viewProject:`Voir projet`,noExternalLink:`Aucun lien externe`,preview3d:`Aperçu 3D`,download:`Télécharger`,edit:`Modifier`,delete:`Supprimer`},runLog:{title:`Journal d'impression`,modalTitle:`Journal d'impression — {{name}}`,modalTitleFallback:`cette archive`,empty:`Aucun événement d'impression enregistré pour cette archive.`,col:{date:`Date`,status:`Statut`,duration:`Durée`,filament:`Filament`,cost:`Coût`},status:{completed:`Terminé`,failed:`Échoué`,cancelled:`Annulé`,stopped:`Arrêté`,skipped:`Ignoré`,printing:`Impression en cours`}},modal:{deleteArchive:`Supprimer l'archive`,deleteConfirm:`Supprimer "{{name}}" ? Cette action est irréversible.`,deleteButton:`Supprimer`,deletePurgeStats:`Retirer également cette impression des Quick Stats (filament, temps, coût, énergie)`,deleteQueueItemsWarning:`{{count}} élément(s) de file d'attente lié(s) à cette archive seront également supprimé(s).`,deleteBlockedByPrinting:`Suppression impossible — {{count}} élément(s) de file d'attente en cours d'impression. Arrêtez l'impression d'abord, puis réessayez.`,removeSource3mf:`Retirer Source 3MF`,removeSource3mfConfirm:`Retirer le fichier 3MF de "{{name}}" ?`,removeButton:`Retirer`,removeF3d:`Retirer F3D`,removeF3dConfirm:`Retirer le fichier Fusion 360 de "{{name}}" ?`,removeTimelapse:`Supprimer le timelapse`,removeTimelapseConfirm:`Êtes-vous sûr de vouloir supprimer la vidéo timelapse de "{{name}}" ?`,timelapse:`{{name}} – Timelapse`,selectTimelapse:`Choisir un Timelapse`,selectTimelapseDesc:`Sélectionnez manuellement le timelapse :`,deleteArchives:`Supprimer les archives`,deleteArchivesConfirm:`Supprimer {{count}} archive(s) ?`,deleteCount:`Supprimer {{count}}`},page:{title:`Archives`,printsCount:`{{filtered}} sur {{total}} impressions`,dropFilesHere:`Déposez les fichiers .3mf ici`,releaseToUpload:`Relâcher pour téléverser`,only3mfSupported:`Seuls les fichiers .3mf sont supportés`,close:`Fermer`,selected:`{{count}} sélectionnés`,selectAll:`Tout sélectionner`,tags:`Étiquettes`,project:`Projet`,favorite:`Favori`,delete:`Supprimer`,toggledFavorites:`Favoris mis à jour pour {{count}} archive(s)`,failedUpdateFavorites:`Échec mise à jour favoris`,archivesDeleted:`{{count}} archive(s) supprimée(s)`,failedDeleteArchives:`Échec suppression`,photoDeleted:`Photo supprimée`,failedDeletePhoto:`Échec suppression photo`},list:{name:`Nom`,printer:`Imprimante`,date:`Date`,size:`Taille`,actions:`Actions`,hasTimelapse:`A un timelapse`},log:{date:`Date`,printName:`Nom de l'impression`,printer:`Imprimante`,user:`Utilisateur`,status:`Statut`,duration:`Durée`,filament:`Filament`,filamentUsed:`Filament utilisé`,cost:`Coût`,energy:`Énergie`,energyCost:`Coût énergétique`,completedAt:`Terminé`,columns:`Colonnes`,sortBy:`Trier par {{column}}`,allPrinters:`Toutes les imprimantes`,allUsers:`Tous les utilisateurs`,allStatuses:`Tous les statuts`,cancelled:`Annulé`,skipped:`Ignoré`,dateFrom:`Du`,dateTo:`Au`,noEntries:`Aucune entrée de journal trouvée`,showing:`{{count}} sur {{total}} entrées`,rowsPerPage:`Lignes`,page:`Page`,prev:`Préc.`,next:`Suiv.`,clearLog:`Effacer le journal`,clearLogTitle:`Effacer le journal d'impression`,clearLogConfirm:`Toutes les entrées du journal d'impression seront supprimées définitivement. Les archives et les éléments de file d'attente ne sont pas affectés. Cette action est irréversible. Êtes-vous sûr ?`,clearLogButton:`Tout effacer`,cleared:`{{count}} entrées de journal effacées`,clearFailed:`Échec de l'effacement du journal d'impression`,deleteEntryTitle:`Supprimer l'entrée du journal d'impression`,deleteEntryConfirm:`Cette entrée sera retirée du journal et ses contributions en filament, temps et coût disparaîtront des statistiques rapides. L'archive correspondante (le cas échéant) n'est pas affectée. Cette action est irréversible.`,entryDeleted:`Entrée du journal d'impression supprimée`,entryDeleteFailed:`Échec de la suppression de l'entrée du journal d'impression`,editEntryTitle:`Modifier l'entrée du journal d'impression`,editEntryDescription:`Classez cette impression. Le widget Analyse des échecs regroupe par ces valeurs, ce qui répercute immédiatement la mise à jour dans les statistiques.`,entryUpdated:`Entrée du journal mise à jour`,entryUpdateFailed:`Échec de la mise à jour de l'entrée du journal`,statuses:{completed:`Terminée`,failed:`Échouée`,stopped:`Arrêtée`,cancelled:`Annulée`,skipped:`Ignorée`}}},dispatchToast:{untitled:`Tâche d'impression`,startingPrints:`Démarrage des impressions`,progressSummary:`{{complete}}/{{total}} terminées • En cours : {{processing}}`,expandDetails:`Afficher les détails de l'envoi`,collapseDetails:`Masquer les détails de l'envoi`,awaitingPrinter:`En attente de l'imprimante…`,status:{processing:`En cours`,completed:`Terminée`,failed:`Échouée`},failed:{generic:`Échec de l'envoi`,upload_failed:`Échec du téléversement vers l'imprimante`,start_command_failed:`L'imprimante a rejeté la commande de démarrage`},dismiss:`Fermer`},pipelineRuns:{title:`Exécutions de pipeline`,loading:`Chargement…`,empty:`Aucune exécution de pipeline pour le moment.`,filter:{pipeline:`Pipeline`,status:`Statut`,target:`Cible`,all:`Toutes`,allPipelines:`Tous les pipelines`,allStatus:`Tous les statuts`,allTargets:`Toutes les cibles`,clear:`Effacer les filtres`,noMatches:`Aucune exécution ne correspond aux filtres actuels.`},totalCount_one:`{{n}} exécution`,totalCount_other:`{{n}} exécutions`,copies:`{{n}} copies`,failedCount:`{{n}} échouées`,copyN:`Copie {{n}}`,retryFailed:`Réessayer les échouées`,retryOf:`réessai de #{{n}}`,pagination:`{{start}}–{{end}} sur {{total}}`,toast:{cancelled:`Exécution annulée`,cancelFailed:`Annulation échouée`,retryStarted:`Réessai démarré`,retryFailed:`Réessai échoué`,cleared:`{{n}} exécutions effacées`,clearFailed:`Échec de l'effacement`},clearLog:`Effacer le journal`,clearConfirmTitle:`Effacer le journal ?`,clearConfirmBody:`Supprimer toutes les exécutions de pipeline terminées, échouées, annulées et en échec partiel ? Les exécutions en cours sont conservées. Ceci ne peut pas être annulé.`,clearConfirmAction:`Effacer`,jobStatus:{pending:`en attente`,awaiting_printer:`attente imprimante`,queued:`en file`,printing:`impression`,completed:`terminée`,failed:`échouée`,cancelled:`annulée`},cancelledByUser:`Annulé par l'utilisateur`},queue:{filamentShort:{rowBadge:`Filament insuffisant pour la bobine assignee`,rowTooltip:`Le planificateur a signale cet element. Cliquez sur Lecture pour voir le deficit par emplacement et decider de lancer quand meme l'impression.`,confirmTitle:`Filament insuffisant`,confirmIntro:`La bobine assignee ne peut pas couvrir au moins un emplacement. Imprimer quand meme ?`,lineItem:`Emplacement {{slot}} : besoin de {{required}} g, {{remaining}} g restants`,unknown:`inconnu`,printAnyway:`Imprimer quand meme`},slicerAmsMapping:{rowBadge:`Emplacements AMS enregistrés pour cette imprimante`,rowTooltip:`Cette archive conserve les emplacements AMS exacts choisis par le slicer, enregistrés pour l'imprimante de cet élément. Une réimpression dessus peut réutiliser ces bobines au lieu de refaire la correspondance par type et couleur.`},title:`File d'attente`,subtitle:`Gérez vos travaux d'impression`,editQueueItem:`Modifier l'élément`,selectAllPlates:`Sélectionner les {{count}} plaques`,deselectAll:`Tout désélectionner`,printQueued:`Impression ajoutée à la file`,printQueuedWillStartWhenIdle:`Démarrera lorsque l'imprimante sera inactive`,itemsQueued:`{{count}} éléments ajoutés à la file`,sending:`Envoi...`,sendingProgress:`Envoi {{current}}/{{total}}...`,adding:`Ajout...`,addingProgress:`Ajout {{current}}/{{total}}...`,savingProgress:`Enregistrement {{current}}/{{total}}...`,clearQueue:`Vider la file`,clearHistory:`Effacer l'historique`,emptyQueue:`La file est vide`,position:`Position`,scheduledTime:`Heure prévue`,moveUp:`Monter`,moveDown:`Descendre`,startNow:`Démarrer maintenant`,printingInProgress:`Impression en cours...`,viewArchive:`Voir l'archive`,viewInFileManager:`Voir dans le gestionnaire`,itemCount:`{{count}} élément`,itemCount_plural:`{{count}} éléments`,dragToReorder:`Glisser pour réordonner (ASAP uniquement)`,reorderHint:`La position n'affecte que les éléments ASAP.`,sjf:{label:`SJF`,tooltip:`Travail le plus court en premier — le planificateur priorise les impressions plus courtes`},addedBy:`Ajouté par {{name}}`,nextInQueue:`Prochain en file`,clearPlateSuccess:`Plateau vidé — prêt pour l'impression suivante`,plateNumber:`Plateau {{index}}`,quantity:`Quantité`,quantityHint:`Crée {{count}} éléments de file d'attente`,plateQuantityLabel:`Impressions de {{plate}}`,plateQuantityTotal_one:`{{count}} impression au total`,plateQuantityTotal_other:`{{count}} impressions au total`,batchOrders:{title:`Commandes par lot`,emptyTitle:`Aucune commande par lot`,emptyDescription:`Mettez en file un fichier multi-plateaux, ou plusieurs copies d'un plateau, et la commande apparaît ici avec son avancement.`,filter:{active:`Actives`,completed:`Terminées`,cancelled:`Annulées`,all:`Toutes`},status:{active:`Active`,completed:`Terminée`,cancelled:`Annulée`},noTargets:`Regroupement seul`,noTargetsHint:`Créée avant les quantités par plateau : elle suit les impressions mises en file plutôt qu'un objectif.`,dispatchRemaining:`Mettre en file les {{count}} restantes`,dispatchPlate:`Mettre le reste en file`,strandedPlate:`Aucun réglage à copier`,strandedNotice:`Impossible de mettre en file {{runs}} des {{owed}} impressions encore dues : aucune impression en file ou terminée ne subsiste pour cette plaque, donc plus aucun réglage à copier. Mettez la plaque en file une fois depuis le fichier, ou annulez la commande.`,dispatched:`Impressions restantes mises en file pour {{name}}`,plateProgress:`{{completed}} sur {{target}} faites`,remaining:`{{count}} encore dues`,failed:`{{count}} échouées`,printing:`{{count}} en cours`,wholeFile:`Fichier entier`,due:`Échéance {{date}}`,costSoFar:`{{amount}} à ce jour`,costRemaining:`({{amount}} à venir)`},activeBatches:`Lots actifs`,batchProgress:`{{completed}} sur {{total}} terminés`,cancelBatch:`Annuler les restants`,batchCancelled:`Éléments restants du lot annulés`,cancelBatchConfirmTitle:`Annuler le lot`,cancelBatchConfirmMessage:`Clôturer cette commande ? Les impressions encore en file sont annulées, et elle cesse de réclamer ce qui n'a pas été produit.`,batch:{defaultName:`Lot`,label:`{{count}} élément`,label_plural:`{{count}} éléments`,pendingCount:`{{count}} en attente`,pendingCount_plural:`{{count}} en attente`,expand:`Développer le lot`,collapse:`Réduire le lot`,groupAsBatch:`Grouper en lot…`,groupAsBatchDescription:`Combiner les {{count}} éléments sélectionnés en un seul lot repliable.`,nameLabel:`Nom du lot`,namePlaceholder:`p. ex. Cadeaux du vendredi`,create:`Créer le lot`,ungroup:`Dégrouper`,ungroupConfirmTitle:`Dégrouper le lot ?`,ungroupConfirmMessage:`Les éléments resteront dans la file mais ne seront plus groupés.`,dragGroup:`Faire glisser le groupe`},tabs:{batches:`Lots`,queue:`File`,history:`Historique`,timeline:`Chronologie`,pipelines:`Exécutions`},layout:{flatList:`Liste`,byPrinter:`Par imprimante`,groupByPrinter:`Grouper par imprimante`},history:{emptyTitle:`Aucun historique`,emptyDescription:`Les impressions terminées, annulées et échouées apparaîtront ici.`,showMore:`Afficher plus`,showingCount:`Affichage de {{shown}} sur {{total}}`},dragGhost:{multiCount:`{{count}} éléments`,batch:`{{name}} ({{count}} copie)`,batch_plural:`{{name}} ({{count}} copies)`},sections:{currentlyPrinting:`En cours`,queued:`En attente`,history:`Historique`},status:{pending:`En attente`,waiting:`En attente`,printing:`Impression`,paused:`En pause`,completed:`Terminé`,failed:`Échoué`,skipped:`Sauté`,cancelled:`Annulé`},summary:{printing:`Impressions`,queued:`En attente`,totalTime:`Temps total estimé`,totalWeight:`Poids total estimé`,history:`Historique`},filter:{allPrinters:`Toutes les imprimantes`,unassigned:`Non assigné`,allStatus:`Tous les statuts`,allLocations:`Tous les emplacements`,any:`Tout`},sort:{byPosition:`Par position`,byName:`Par nom`,byPrinter:`Par imprimante`,bySchedule:`Par planification`,byDate:`Par date`,ascendingOldest:`Croissant (plus vieux)`,descendingNewest:`Décroissant (plus récent)`},badges:{staged:`Préparé`,requiresPrevious:`Nécessite succès précédent`,autoPowerOff:`Extinction auto`,gcodeInjection:`G-code`},empty:{title:`Aucune impression prévue`,description:`Planifiez depuis les Archives ou glissez des fichiers ici.`},time:{etaIfStartedNow:`Heure de fin si cette tâche démarrait maintenant`,whenFree:`Dès qu'une imprimante est libre`,overdue:`En retard`,now:`Maintenant`,lessThanMinute:`Dans moins d'une minute`,inMinutes:`Dans {{count}} min`,inHours:`Dans {{count}} heures`},actions:{startPrint:`Démarrer`,stopPrint:`Arrêter`,requeue:`Remettre en file`},bulkEdit:{title:`Modifier {{count}} élément`,title_plural:`Modifier {{count}} éléments`,description:`Seuls les changements seront appliqués.`,printer:`Imprimante`,noChange:`— Aucun changement —`,queueOptions:`Options de file`,staged:`Préparé (manuel)`,autoPowerOff:`Extinction auto après`,requirePrevious:`Requiert succès précédent`,gcodeInjection:`Injecter le G-code`,printOptions:`Options d'impression`,bedLevelling:`Nivellement plateau`,flowCalibration:`Calibration débit`,vibrationCalibration:`Vibration (Input Shaper)`,layerInspection:`Inspection 1ère couche`,timelapse:`Time-lapse`,useAms:`Utiliser AMS`,nozzleOffsetCali:`Calibration du décalage des buses`,applyChanges:`Appliquer`,selectAll:`Tout sélectionner`,deselectAll:`Tout désélectionner`,selected:`{{count}} sélectionnés`,editSelected:`Modifier la sélection`,cancelSelected:`Annuler la sélection`},confirm:{cancelTitle:`Annuler l'impression prévue`,cancelMessage:`Annuler "{{name}}" ?`,stopTitle:`Arrêter l'impression`,stopMessage:`Arrêter "{{name}}" sur l'imprimante ?`,removeTitle:`Retirer de l'historique`,removeMessage:`Retirer "{{name}}" de l'historique ?`,clearHistoryTitle:`Effacer l'historique`,clearHistoryMessage:`Retirer les {{count}} éléments ?`,cancelButton:`Annuler l'impression`,stopButton:`Arrêter l'impression`,thisPrint:`cette impression`,thisItem:`cet élément`},toast:{cancelled:`Élément annulé`,cancelFailed:`Échec annulation`,removed:`Élément retiré`,keptForOrder:`Annulé au lieu d'être retiré : cette impression est la seule dont la commande peut remettre cette plaque en file`,historyKeptForOrders:`{{kept}} conservées car des commandes en ont encore besoin.`,removeFailed:`Échec retrait`,stopped:`Impression arrêtée`,stopFailed:`Échec arrêt`,released:`Libéré dans la file`,startFailed:`Échec démarrage`,reorderFailed:`Échec réorganisation`,historyCleared:`{{count}} éléments effacés`,clearHistoryFailed:`Échec effacement`,updateFailed:`Échec mise à jour`,bulkCancelled:`{{count}} éléments annulés`,bulkCancelFailed:`Échec annulation`,batchCreated:`Lot « {{name}} » créé`,batchCreateFailed:`Échec de la création du lot`,batchUngrouped:`{{count}} élément(s) dégroupé(s)`,batchUngroupFailed:`Échec du dégroupement du lot`,resumedAfterFailure:`File reprise — {{restored}} tâche(s) restaurée(s) en attente`,resumeAfterFailureFailed:`Échec de la reprise de la file`},resumeAfterFailure:{banner:`{{printer}} est bloquée par un échec d'impression précédent — {{count}} tâche(s) ignorée(s)`,bannerHint:`Résolvez le problème de l'imprimante, puis reprenez la file pour restaurer les tâches ignorées et lever le blocage.`,button:`Reprendre après échec`,confirmTitle:`Reprendre la file après l'échec ?`,confirmMessage:`Restaurer {{count}} tâche(s) ignorée(s) sur {{printer}} en attente et lever le blocage de l'impression précédente. Assurez-vous que l'imprimante est prête avant de continuer.`},timeline:{listView:`Liste`,timelineView:`Chronologie`,unassigned:`Non attribué`,noData:`Aucune impression planifiée pour ce jour`,nothingCommitted:`Aucun horaire confirmé dans cette fenêtre. Les éléments en attente d’action, les éléments bloqués et les jobs ASAP sur des imprimantes inactives ne sont pas affichés — définissez une heure planifiée ou libérez un élément en attente pour qu’il apparaisse ici.`,allDoneBy:`Toutes les impressions terminées vers {{time}}`,staged:`En attente`,filterAll:`Tout afficher`,filterPrinting:`En cours`,filterQueued:`En file`,time:{anyMoment:`imminent`,minutesLeft:`{{minutes}}m restantes`,hoursLeft:`{{hours}}h restantes`,hoursMinutesLeft:`{{hours}}h {{minutes}}m restantes`},day:{previous:`Jour précédent`,next:`Jour suivant`,today:`Aujourd'hui`},window:{back12h:`Reculer de 12 heures`,forward12h:`Avancer de 12 heures`,now:`Maintenant`},printerColumnHeader:`Imprimante`},permissions:{noStopPrint:`Pas d'autorisation d'arrêt`,noStartPrint:`Pas d'autorisation de démarrage`,noEdit:`Pas d'autorisation de modification`,noCancel:`Pas d'autorisation d'annulation`,noRequeue:`Pas d'autorisation de remise en file`,noRemove:`Pas d'autorisation de retrait`,noClearHistory:`Pas d'autorisation historique`,noEditItems:`Pas d'autorisation modification groupée`,noCancelItems:`Pas d'autorisation annulation groupée`}},stats:{title:`Statistiques`,subtitle:`Glissez les widgets pour réorganiser. Cliquez sur l'œil pour masquer.`,overview:`Vue d'ensemble`,totalPrints:`Total impressions`,successRate:`Taux de succès`,totalPrintTime:`Temps total d'impression`,printTime:`Temps d'impression`,totalFilament:`Total filament utilisé`,filamentUsed:`Filament utilisé`,filamentCost:`Coût filament`,totalCost:`Coût total`,energyUsed:`Énergie consommée`,energyCost:`Coût énergie`,energyWarmingUpTooltip:`Le suivi énergétique collecte encore des instantanés horaires. Les totaux par période deviendront précis dès qu’un instantané existera avant la plage sélectionnée. Les premières valeurs peuvent être sous-estimées.`,averagePrintTime:`Temps moyen par impression`,printsPerDay:`Impressions par jour`,byPrinter:`Par imprimante`,printsByPrinter:`Impressions par imprimante`,byMaterial:`Par matériau`,byMonth:`Par mois`,last7Days:`7 derniers jours`,last30Days:`30 derniers jours`,last90Days:`90 derniers jours`,allTime:`Tout le temps`,quickStats:`Stats rapides`,printActivity:`Activité d'impression`,filamentTypes:`Types de filament`,filamentTrends:`Tendances filament`,failureAnalysis:`Analyse des échecs`,timeAccuracy:`Précision du temps`,successful:`Succès :`,failed:`Échecs :`,cancelled:`Annulés :`,perfectEstimate:`100% = estimation parfaite`,noTimeAccuracyData:`Pas encore de données de précision`,noFilamentData:`Aucune donnée de filament`,noPrinterData:`Aucune donnée d'imprimante`,noPrintData:`Aucune donnée d'impression`,noPrintDataLast30Days:`Aucune impression ces 30 derniers jours`,failureReasons:`Raisons des échecs`,topFailureReasons:`Top raisons d'échec`,failedPrintsCount:`{{failed}} / {{total}} impressions ont échoué`,lastWeekRate:`Semaine dernière : {{rate}}%`,resetLayout:`Réinitialiser la mise en page`,recalculateCosts:`Recalculer les coûts`,recalculateCostsHint:`Recalcule les coûts avec les prix actuels des filaments`,exportStats:`Exporter les stats`,exportAsCsv:`Exporter en CSV`,exportAsExcel:`Exporter en Excel`,hiddenCount:`{{count}} Masqués`,exportDownloaded:`Export téléchargé`,exportFailed:`Échec export`,layoutReset:`Mise en page réinitialisée`,recalculatedCosts:`Coûts recalculés pour {{count}} archives`,recalculateFailed:`Échec du calcul`,loadingStats:`Chargement des statistiques...`,noPermissionResetLayout:`Pas d'autorisation de réinitialisation`,noPermissionRecalculate:`Pas d'autorisation de recalcul`,noPrintDataInRange:`Aucune donnée dans la période sélectionnée`,periodFilament:`Filament utilisé`,periodCost:`Coût`,avgPerPrint:`Moy. par impression`,usageOverTime:`Utilisation dans le temps`,energyOverTime:`Énergie dans le temps`,filamentByWeight:`Poids`,printDuration:`Durée d'impression`,printerUtilization:`Utilisation imprimante`,filamentSuccess:`Succès par matériau`,printHabits:`Habitudes d'impression`,printTimeOfDay:`Heure d'impression`,colorDistribution:`Distribution des couleurs`,noColorData:`Aucune donnée de couleur disponible`,records:`Enregistrements`,longestPrint:`Plus longue impression`,heaviestPrint:`Plus lourde impression`,mostExpensivePrint:`Plus chère`,busiestDay:`Jour le plus actif`,successStreak:`Série de succès`,streakPrint:`impression consécutive`,streakPrints:`{{count}} impressions consécutives`,printerStats:`Stats imprimante`,hours:`heures`,avgPrints:`Moy. impressions`,noArchiveData:`Aucune donnée d'impression disponible`,filamentByTime:`Temps`,avgWeight:`Moy. poids`,avgTime:`Moy. temps`,filamentByPrints:`Impressions`,timeframe:{today:`Aujourd'hui`,"this-week":`Cette semaine`,"this-month":`Ce mois`,"last-7":`7 derniers jours`,"last-30":`30 derniers jours`,"last-90":`90 derniers jours`,"this-year":`Cette année`,"all-time":`Tout`,custom:`Personnalisé`,from:`Du`,to:`Au`},allUsers:`Tous les utilisateurs`,noUser:`Aucun utilisateur (Système)`,filterByUser:`Filtrer par utilisateur`},maintenance:{title:`Maintenance`,overview:`Vue d'ensemble`,allOk:`Toute la maintenance est à jour`,dueCount:`{{count}} tâche à faire`,dueCount_plural:`{{count}} tâches à faire`,warningCount:`{{count}} avertissement`,warningCount_plural:`{{count}} avertissements`,totalPrintTime:`Temps d'impression total`,nextMaintenance:`Prochaine maintenance`,nothingDue:`Rien de prévu`,tasks:`Tâches`,lastPerformed:`Dernière réalisation`,interval:`Intervalle`,hoursRemaining:`{{hours}}h restantes`,hoursOverdue:`{{hours}}h de retard`,markDone:`Marquer comme fait`,performMaintenance:`Effectuer la maintenance`,history:`Historique`,noHistory:`Aucun historique`,editPrintHours:`Modifier les heures d'impression`,currentHours:`Heures actuelles`,statusTab:`Statut`,settingsTab:`Paramètres`,overdueCount:`{{count}} en retard`,dueSoonCount:`{{count}} bientôt`,dueSoon:`Bientôt`,allGood:`Tout va bien`,overdueBy:`Retard de {{duration}}`,dueIn:`Dans {{duration}}`,timeLeft:`{{duration}} restant`,day:`1 jour`,days:`{{count}} jours`,week:`1 semaine`,weeks:`{{count}} semaines`,month:`1 mois`,months:`{{count}} mois`,year:`1 an`,maintenanceTypes:`Types de maintenance`,maintenanceTypesDescription:`Types système et tâches personnalisées`,addCustomType:`Ajouter un type`,restoreDefaults:`Restaurer les tâches par défaut`,intervalType:`Type d'intervalle`,intervalValue:`Intervalle ({{type}})`,icon:`Icône`,documentationLink:`Lien documentation (optionnel)`,assignToPrinters:`Assigner aux imprimantes`,selectAtLeastOnePrinter:`Sélectionnez au moins une imprimante`,addType:`Ajouter le type`,custom:`Personnalisé`,printHours:`Heures d'impression`,calendarDays:`Jours calendaires`,exampleName:`ex: Remplacement filtre HEPA`,viewDocumentation:`Voir documentation`,timeBasedInterval:`Intervalle temporel`,intervalOverrides:`Exceptions d'intervalle`,intervalOverridesDescription:`Intervalles spécifiques par imprimante`,assignedToPrinters:`Assigné aux imprimantes :`,noPrintersAssigned:`Aucune imprimante assignée`,addPrinterShort:`Ajouter :`,printersAssignedClick:`{{count}} imprimante(s) assignée(s) - gérer`,removeFromPrinter:`Retirer de cette imprimante`,types:{lubricateCarbonRods:`Lubrifier les tiges carbone`,lubricateRails:`Lubrifier les rails linéaires`,cleanNozzle:`Nettoyer la buse / hotend`,checkBelts:`Vérifier la tension des courroies`,cleanBuildPlate:`Nettoyer le plateau`,checkExtruder:`Vérifier les engrenages de l'extrudeur`,checkCooling:`Vérifier les ventilateurs`,generalInspection:`Inspection générale`,cleanCarbonRods:`Nettoyer les tiges carbone`,lubricateSteelRods:`Lubrifier les tiges en acier`,cleanSteelRods:`Nettoyer les tiges en acier`,cleanLinearRails:`Nettoyer les rails linéaires`,checkPtfeTube:`Vérifier le tube PTFE`,replaceHepaFilter:`Remplacer le filtre HEPA`,replaceCarbonFilter:`Remplacer le filtre charbon`,lubricateLeftNozzleRail:`Lubrifier le rail de buse gauche`},maintenanceComplete:`Maintenance marquée comme faite`,typeUpdated:`Type mis à jour`,typeDeleted:`Type supprimé`,defaultsRestored:`{{count}} tâche(s) par défaut restaurée(s)`,printHoursUpdated:`Heures mises à jour`,printerAssigned:`Imprimante assignée`,printerRemoved:`Imprimante retirée`,deleteTypeConfirm:`Supprimer "{{name}}" ?`,deleteSystemTypeTitle:`Supprimer la tâche de maintenance par défaut ?`,deleteSystemTypeMessage:`Êtes-vous sûr de vouloir supprimer la tâche de maintenance par défaut "{{name}}" ?`,noPermissionUpdate:`Pas d'autorisation de mise à jour`,noPermissionPerform:`Pas d'autorisation d'action`,noPermissionEditTypes:`Pas d'autorisation de modification types`,noPermissionDeleteTypes:`Pas d'autorisation de suppression types`,noPermissionEditHours:`Pas d'autorisation de modification heures`,noPermissionRemovePrinter:`Pas d'autorisation retrait imprimante`,noPermissionAssignPrinter:`Pas d'autorisation assignation`,noPermissionEditIntervals:`Pas d'autorisation modification intervalles`,configureSettings:`Configurer types et intervalles`},settings:{sliceEngine:`Moteur de découpage`,sliceEngineSidecar:`Sidecar serveur`,sliceEngineSidecarHint:`Le découpage s'exécute sur le serveur, dans le conteneur sidecar du trancheur.`,sliceEngineBrowser:`Dans le navigateur`,sliceEngineBrowserHint:`Le découpage s'exécute sur cet appareil, sans serveur.`,title:`Paramètres`,general:`Général`,tabs:{general:`Général`,smartPlugs:`Prises connectées`,sensors:`Capteurs`,notifications:`Notifications`,queue:`Flux de travail`,queueDispatch:`File & Distribution`,queuePipelines:`Pipelines`,filament:`Filament`,network:`Réseau`,apiKeys:`Clés API`,virtualPrinter:`Imprimante virtuelle`,failureDetection:`Détection d'échec`,users:`Authentification`,backup:`Sauvegarde`,emailAuth:`Authentification Email`,ldap:`LDAP`,twoFa:`Authentification 2FA`,oidc:`SSO / OIDC`,security:`Sécurité`,spoolbuddy:`SpoolBuddy`},ldap:{title:`Authentification LDAP`,enabledDesc:`L'authentification LDAP est activée`,disabledDesc:`L'authentification LDAP est désactivée`,disabledHint:`Configurez et enregistrez les paramètres LDAP ci-dessous, puis activez.`,enabled:`Authentification LDAP activée`,disabled:`Authentification LDAP désactivée`,feature1:`Les utilisateurs peuvent se connecter avec leurs identifiants LDAP`,feature2:`Le compte administrateur local reste disponible en secours`,feature3:`Les groupes LDAP sont associés aux groupes BamBuddy à la connexion`,serverConfig:`Configuration du serveur LDAP`,serverUrl:`URL du serveur`,serverUrlHint:`Utilisez ldap:// pour standard ou ldaps:// pour les connexions SSL`,security:`Sécurité`,securityHint:`StartTLS met à niveau une connexion simple vers TLS. LDAPS utilise TLS dès le début.`,bindDn:`DN de liaison (compte de service)`,bindPassword:`Mot de passe de liaison`,searchBase:`DN de base de recherche`,userFilter:`Filtre de recherche utilisateur`,userFilterHint:`{username} est remplacé par le nom d'utilisateur. Utilisez (uid={username}) pour OpenLDAP.`,advanced:`Avancé`,autoProvision:`Provisionnement automatique`,autoProvisionHint:`Créer automatiquement un compte BamBuddy lors de la première connexion LDAP`,defaultGroup:`Groupe par défaut`,defaultGroupNone:`— Aucun (pas de repli) —`,defaultGroupHint:`Groupe de repli attribué lorsqu'un utilisateur LDAP s'authentifie mais n'est dans aucun groupe LDAP mappé. Laissez vide pour laisser les utilisateurs non mappés sans autorisations.`,groupMapping:`Mappage de groupes (JSON)`,groupMappingHint:`Associer les DN de groupes LDAP aux groupes BamBuddy. Groupes disponibles : `,testConnection:`Tester la connexion`,settingsSaved:`Paramètres LDAP enregistrés`,errors:{serverRequired:`L'URL du serveur LDAP est requise`,searchBaseRequired:`Le DN de base de recherche est requis`,enableAuthFirst:`Activez d'abord l'authentification`,configureLdapFirst:`Enregistrez d'abord les paramètres LDAP`}},email:{smtpSettings:`Configuration SMTP`,smtpHost:`Serveur SMTP`,smtpPort:`Port SMTP`,security:`Sécurité`,authentication:`Authentification`,username:`Utilisateur`,password:`Mot de passe`,fromEmail:`Email expéditeur`,fromName:`Nom expéditeur`,testConnection:`Tester la connexion SMTP`,testRecipient:`Email test destinataire`,sendTest:`Envoyer email test`,sending:`Envoi...`,save:`Enregistrer les paramètres`,saving:`Enregistrement...`,advancedAuth:`Authentification avancée`,advancedAuthEnabled:`L'authentification avancée est activée`,advancedAuthEnabledDesc:`La gestion des utilisateurs par email est active. Les nouveaux utilisateurs recevront un mot de passe auto-généré.`,advancedAuthDisabled:`Authentification avancée désactivée`,advancedAuthDisabledDesc:`Activez pour les fonctionnalités liées à l'email (mot de passe oublié, etc).`,enable:`Activer`,disable:`Désactiver`,feature1:`Génération auto et envoi de mots de passe par email`,feature2:`Connexion par utilisateur ou email`,feature3:`Réinitialisation mot de passe oublié disponible`,feature4:`Réinitialisation admin par email`,errors:{requiredFields:`Remplissez tous les champs requis`,usernameRequired:`L'utilisateur est requis pour l'authentification`,enterTestEmail:`Entrez une adresse email de test`,smtpServerAndEmail:`Serveur et expéditeur requis pour le test`,usernamePasswordRequired:`Utilisateur et mot de passe requis pour l'auth`,configureSmtpFirst:`Configurez et testez le SMTP d'abord`,enableAuthFirst:`Veuillez d'abord activer l'authentification pour utiliser les fonctionnalités basées sur le courrier électronique.`},success:{settingsSaved:`Paramètres SMTP enregistrés`},securityOptions:{starttls:`STARTTLS (Port 587)`,ssl:`SSL/TLS (Port 465)`,none:`Aucun (Port 25)`},authOptions:{enabled:`Activée`,disabled:`Désactivée`}},appearance:`Apparence`,notifications:`Notifications`,smartPlugs:`Prises connectées`,spoolman:`Spoolman`,updates:`Mises à jour`,language:`Langue`,languageDescription:`Choisissez votre langue`,theme:`Thème`,themeLight:`Clair`,themeDark:`Sombre`,themeSystem:`Système`,defaultView:`Vue par défaut`,defaultViewDescription:`Page affichée au démarrage`,checkForUpdates:`Vérifier les mises à jour`,autoUpdate:`Mise à jour auto`,currentVersion:`Version actuelle`,latestVersion:`Dernière version`,upToDate:`Bambuddy est à jour`,updateAvailable:`Mise à jour disponible`,notificationLanguage:`Langue des notifications`,notificationLanguageDescription:`Langue pour les notifications push`,bedCooledThreshold:`Seuil de refroidissement du plateau`,bedCooledThresholdDescription:`Température en dessous de laquelle le plateau est considéré comme refroidi`,userNotificationsEnabled:`Notifications utilisateur`,userNotificationsEnabledDescription:`Active le menu de notifications utilisateur et les notifications par e-mail pour les événements d'impression. Nécessite l'authentification avancée.`,userNotificationsDisabledHint:`Activez l'authentification avancée pour utiliser les notifications utilisateur.`,notificationProviders:`Fournisseurs de notifications`,addProvider:`Ajouter un fournisseur`,editProvider:`Modifier le fournisseur`,providerType:`Type de fournisseur`,testNotification:`Tester la notification`,testSuccess:`Notification de test envoyée`,testFailed:`Échec de l'envoi du test`,quietHours:`Heures de silence`,quietHoursDescription:`Ne pas déranger pendant ces heures`,quietHoursStart:`Début`,quietHoursEnd:`Fin`,events:{title:`Événements de notification`,printStart:`Impression démarrée`,printComplete:`Impression terminée`,printFailed:`Impression échouée`,printStopped:`Impression arrêtée`,printProgress:`Jalons de progression`,printProgressDescription:`Notifier à 25%, 50%, 75%`,printerOffline:`Imprimante hors ligne`,printerError:`Erreur imprimante`,filamentLow:`Filament bas`,maintenanceDue:`Maintenance due`,maintenanceDueDescription:`Notifier quand une tâche est due`},smartPlug:{title:`Prises connectées`,add:`Ajouter une prise`,edit:`Modifier la prise`,name:`Nom`,ipAddress:`Adresse IP`,linkedPrinter:`Imprimante liée`,autoOn:`Allumage auto`,autoOnDescription:`Allumer au début de l'impression`,autoOff:`Extinction auto`,autoOffDescription:`Éteindre après l'impression`,offDelay:`Délai d'extinction`,offDelayMinutes:`Minutes après fin`,offDelayTemp:`Quand la buse est sous`,currentState:`État actuel`,turnOn:`Allumer`,turnOff:`Éteindre`},filamentTracking:`Suivi de Filament`,filamentTrackingDesc:`Choisissez comment suivre vos bobines. Utilisez l'inventaire intégré ou connectez un serveur Spoolman.`,autoAddUnknownRfid:`Ajouter automatiquement les bobines RFID inconnues`,autoAddUnknownRfidDesc:`Crée automatiquement une entrée d'inventaire lorsqu'une bobine avec un tag RFID inconnu est détectée. Désactivez si vous enregistrez manuellement les nouvelles bobines à l'avance pour éviter les doublons.`,filamentChecks:`Vérifications du filament`,disableFilamentWarnings:`Désactiver les avertissements de filament`,disableFilamentWarningsDesc:`Ne pas afficher les avertissements de filament insuffisant lors de l'impression ou de la mise en file d'attente`,preferLowestFilament:`Préférer le filament le plus bas`,preferLowestFilamentDesc:`Lorsque plusieurs bobines correspondent, utiliser celle avec le moins de filament restant`,preferLowestFilamentBackupNote:`Ne prend effet que si AMS Filament Backup est activé sur l'imprimante — sinon, l'imprimante ne peut pas basculer vers une seconde bobine quand celle choisie est vide.`,trackingModeBuiltIn:`Inventaire Intégré`,trackingModeBuiltInDesc:`Correspondance RFID et suivi de consommation inclus`,trackingModeSpoolmanDesc:`Serveur de gestion externe`,builtInFeatureRfid:`Détecte auto les bobines RFID Bambu Lab dans l'AMS`,builtInFeatureUsage:`Suit la consommation par impression`,builtInFeatureCatalog:`Gère bobines, couleurs et profils facteur K`,builtInFeatureThirdParty:`Les bobines tierces peuvent être assignées aux bobines d'inventaire`,amsSyncButton:`Synchroniser les poids depuis l'AMS`,amsSyncTitle:`Synchroniser les poids des bobines depuis l'AMS`,amsSyncMessage:`Tous les poids des bobines de l'inventaire seront écrasés par les valeurs actuelles de l'AMS des imprimantes connectées. Utilisez ceci pour récupérer des données de poids corrompues. Les imprimantes doivent être en ligne.`,amsSyncing:`Synchronisation...`,amsSyncSuccess:`{{synced}} bobine(s) synchronisée(s), {{skipped}} ignorée(s)`,amsSyncError:`Échec de la synchronisation des poids depuis l'AMS`,spoolmanAmsSyncButton:`Synchroniser les poids Spoolman depuis l'AMS`,spoolmanAmsSyncTitle:`Synchroniser les poids des bobines Spoolman depuis l'AMS`,spoolmanAmsSyncMessage:`Cela mettra à jour les poids des bobines Spoolman en fonction des valeurs de remplissage AMS actuelles des imprimantes connectées. Les imprimantes doivent être en ligne.`,spoolmanAmsSyncing:`Synchronisation...`,spoolmanAmsSyncSuccess:`{{synced}} bobine(s) synchronisée(s), {{skipped}} ignorée(s)`,spoolmanAmsSyncError:`Échec de la synchronisation des poids Spoolman depuis l'AMS`,spoolmanAmsSyncErrorUnreachable:`Échec de la synchronisation (Spoolman inaccessible)`,spoolmanAmsSyncErrorNotConfigured:`Échec de la synchronisation (Spoolman non configuré)`,spoolmanNotConfigured:`Spoolman non configuré`,spoolmanFilamentCatalogTitle:`Catalogue de filaments Spoolman`,spoolmanFilamentCatalogDesc:`Noms de filaments et poids à vide depuis votre instance Spoolman. Le nom et le poids bobine sont modifiables ici ; toutes les autres propriétés sont gérées directement dans Spoolman.`,spoolmanUrl:`URL Spoolman`,spoolmanUrlHint:`URL de votre serveur Spoolman (ex: http://localhost:7912)`,spoolmanConnected:`Connecté`,spoolmanDisconnected:`Déconnecté`,status:`Statut`,connect:`Connecter`,disconnect:`Déconnecter`,howSyncWorks:`Fonctionnement de la Sync`,syncInfoRfidOnly:`Seules les bobines officielles RFID sont synchronisées`,syncInfoAutoCreate:`Les bobines sont créées dans Spoolman à la 1ère sync`,syncInfoThirdPartySkipped:`Les bobines tierces ou rechargées sont ignorées`,linkingExistingSpools:`Lier des bobines existantes`,linkingExistingSpoolsDesc:`Pour lier une bobine Spoolman, survolez un slot AMS et cliquez sur "Lier à Spoolman".`,syncMode:`Mode de Sync`,syncModeAuto:`Automatique`,syncModeManual:`Manuel uniquement`,syncModeAutoDesc:`Sync auto lors de changements AMS`,syncModeManualDesc:`Sync uniquement sur déclenchement manuel`,syncAmsData:`Synchroniser AMS`,syncAmsDataDesc:`Synchroniser manuellement les données vers Spoolman`,allPrinters:`Toutes les imprimantes`,noDefaultPrinter:`Aucune par défaut (demander à chaque fois)`,sidebarOrder:`Ordre de la barre latérale`,saveThumbnails:`Enregistrer les vignettes`,captureFinishPhoto:`Prendre une photo à la fin`,noPrintersConfigured:`Aucune imprimante configurée`,archiveMode:{always:`Toujours créer une archive`,never:`Ne jamais créer d'archive`,ask:`Demander à chaque fois`},checkForUpdatesLabel:`Vérifier les mises à jour`,checkPrinterFirmware:`Vérifier le firmware imprimante`,includeBetaUpdates:`Inclure les versions bêta`,includeBetaUpdatesDesc:`Notifier des versions bêta et préliminaires lors de la vérification des mises à jour`,localLogin:{disable:`Désactiver la connexion locale par nom d'utilisateur/mot de passe`,disableHint:`Quand activée, seuls les fournisseurs SSO peuvent se connecter. LDAP n'est pas affecté. Définissez BAMBUDDY_LOCAL_LOGIN=true sur le serveur pour conserver une voie de récupération.`},enableRetry:`Activer la rétentative`,homeAssistantDescription:`Contrôler les prises via Home Assistant`,environmentManagedLabel:`(Géré par l'environnement)`,autoEnabledViaEnv:`Activé via variables d'environnement`,urlFromEnvReadOnly:`Valeur HA_URL (lecture seule)`,tokenFromEnvReadOnly:`Valeur HA_TOKEN (lecture seule)`,mqttConnectedTo:`Connecté à`,prometheusDescription:`Exposer les données au format Prometheus`,noSmartPlugsTitle:`Aucune prise configurée`,noSmartPlugsDescription:`Ajoutez une prise Tasmota pour suivre l'énergie et automatiser.`,noProvidersTitle:`Aucun fournisseur configuré`,noProvidersDescription:`Ajoutez un fournisseur pour recevoir des alertes.`,noTemplatesAvailable:`Aucun modèle dispo. Redémarrez pour les générer.`,apiPermissionView:`Voir statut et file`,apiPermissionEdit:`Gérer la file d'attente`,apiKeysEmptyTitle:`Aucune clé API`,apiKeysEmptyDescription:`Créez une clé pour vos intégrations.`,noUsersFound:`Aucun utilisateur trouvé`,noGroupsFound:`Aucun groupe trouvé`,noGroupsAvailable:`Aucun groupe disponible`,passwordsDoNotMatch:`Les mots de passe ne correspondent pas`,systemGroupWarning:`Les noms des groupes système sont fixes`,authDisabledTitle:`Authentification désactivée`,authDisabledFeature1:`Requis pour accéder au système`,authDisabledFeature2:`Gestion multi-utilisateurs et groupes`,authDisabledFeature3:`Plus de 50 permissions granulaires`,userHasCreated:`Cet utilisateur a créé :`,userItemsQuestion:`Que faire de ces éléments ?`,deleteUserConfirm:`Supprimer cet utilisateur ?`,actionCannotBeUndone:`Cette action est irréversible.`,addFirstSmartPlug:`Ajoutez votre première prise`,providers:`Fournisseurs`,log:`Journal`,testAll:`Tout tester`,testResults:`Résultats du test`,testPassedCount:`{{count}} succès`,testFailedCount:`{{count}} échecs`,messageTemplates:`Modèles de message`,messageTemplatesDescription:`Personnalisez les messages par événement.`,apiKeys:`Clés API`,apiKeysDescription:`Créez des clés pour webhooks et API.`,createKey:`Créer une clé`,apiKeyCreated:`Clé API créée avec succès`,apiKeyCopyWarning:`Copiez cette clé maintenant - elle ne sera plus affichée !`,useInApiBrowser:`Utiliser dans l'explorateur API`,apiKeyQrButton:`Code QR`,apiKeyQrTitle:`Scanner pour configurer`,apiKeyQrCaption:`Scannez avec votre application mobile pour ajouter ce serveur et cette clé API.`,apiKeyQrWarning:`Contient votre clé API secrète — ne la partagez pas et ne la capturez pas là où d'autres peuvent la voir.`,createNewApiKey:`Nouvelle clé API`,keyName:`Nom de la clé`,keyNamePlaceholder:`ex: Home Assistant, OctoPrint`,readStatus:`Lire le statut`,readStatusDescription:`Voir l'état des imprimantes, la file, la bibliothèque, les archives et les pipelines du trancheur`,manageQueue:`Gérer la file`,manageQueueDescription:`Ajouter/retirer des éléments. Avec "Gérer la bibliothèque", exécuter des pipelines du trancheur`,controlPrinter:`Contrôler l'imprimante`,controlPrinterDescription:`Pause, reprise, arrêt`,manageLibrary:`Gérer la bibliothèque`,manageLibraryDescription:`Téléverser, renommer, supprimer et trancher des fichiers de la bibliothèque ; importer des modèles depuis MakerWorld. Avec "Gérer la file", exécuter des pipelines du trancheur`,manageInventory:`Gérer l'inventaire`,manageInventoryDescription:`Créer, modifier et supprimer des bobines et des entrées d'inventaire. Requis pour les bornes SpoolBuddy (scan NFC, lectures de balance, commandes système de la borne).`,manageMaintenance:`Gérer la maintenance`,manageMaintenanceDescription:`Enregistrer les maintenances effectuées, réinitialiser les compteurs, modifier les intervalles et gérer le catalogue des types de maintenance. Adapté aux automatisations Home Assistant qui consignent "J'ai nettoyé la buse" sans accorder un contrôle plus large de l'imprimante.`,manageArchives:`Gérer les archives`,manageArchivesDescription:`Modifier et supprimer les archives d'impression, y compris la suppression des anciennes impressions et de leur contribution aux statistiques. Adapté aux automatisations qui élaguent l'historique d'impression.`,manageProjects:`Gérer les projets`,manageProjectsDescription:`Créer, modifier et supprimer des projets, et y ajouter des archives. Adapté aux automatisations qui organisent les impressions en projets.`,maintenanceBadge:`Maintenance`,archivesBadge:`Archives`,projectsBadge:`Projets`,libraryBadge:`Bibliothèque`,inventoryBadge:`Inventaire`,cloudAccess:`Autoriser l'accès cloud`,cloudAccessDescription:`Lit les préréglages et filaments Bambu Cloud en votre nom. Nécessite d'être connecté à Bambu Cloud.`,cloudBadge:`Cloud`,updateEnergyCost:`Mettre à jour le tarif électrique`,updateEnergyCostDescription:`Autoriser cette clé à POSTer un nouveau tarif électrique par kWh sur /settings/electricity-price. Utile pour les automatisations Home Assistant à tarif dynamique (Tibber, Octopus, etc.). Il s'agit du seul champ de paramètres modifiable via clé API.`,energyCostBadge:`Énergie`,legacyKey:`Hérité`,legacyKeyTooltip:`Créé avant la propriété par utilisateur ; recréez pour l'accès cloud`,unnamedKey:`Clé sans nom`,lastUsed:`Dernière utilisation`,read:`Lecture`,control:`Contrôle`,createFirstKey:`Créez votre première clé`,webhookEndpoints:`Points de terminaison Webhook`,webhookApiKeyHint:`Utilisez la clé dans l'en-tête X-API-Key.`,webhook:{getAllStatus:`Tous les statuts`,getSpecificStatus:`Statut spécifique`,addToQueue:`Ajouter à la file`,pausePrint:`Pause`,resumePrint:`Reprise`,stopPrint:`Arrêt`},apiBrowser:`Explorateur API`,apiBrowserDescription:`Testez les endpoints API.`,apiKeyForTesting:`Clé API pour test`,apiKeyPlaceholder:`Collez votre clé pour tester...`,apiKeyHint:`Sera envoyée via l'en-tête X-API-Key.`,deleteApiKeyTitle:`Supprimer la clé API`,deleteApiKeyMessage:`Les intégrations utilisant cette clé cesseront de fonctionner.`,deleteKey:`Supprimer la clé`,amsDisplayThresholds:`Seuils d'affichage AMS`,amsThresholdsDescription:`Seuils de couleur pour humidité et température.`,humidity:`Humidité`,goodGreen:`Bon (vert)`,fairOrange:`Moyen (orange)`,aboveFairBad:`Au-dessus = rouge (mauvais)`,fairAlsoDryingThreshold:`Ce seuil est aussi utilisé pour déclencher le séchage automatique`,fairBelowDryingFloor:`Le séchage automatique ne peut pas atteindre cette valeur : un AMS indique {{floor}} % ou plus lorsqu'il chauffe, donc chaque cycle se terminerait puis redémarrerait aussitôt. Passez au-dessus de {{floor}} % si le séchage automatique est activé.`,temperature:`Température`,goodBlue:`Bon (bleu)`,aboveFairHot:`Au-dessus = rouge (chaud)`,tempAlarmThreshold:`Alerte au-dessus de`,tempAlarmSeparateFromBand:`Seul le seuil d'alerte envoie des notifications — Bon et Correct ne font que colorer l'affichage. Laissez vide pour alerter au seuil correct, comme avant.`,tempAlarmMustBePositive:`Un seuil de 0 ou moins est ignoré — l'alerte utilise alors le seuil correct.`,historyRetention:`Rétention d'historique`,keepSensorHistory:`Garder l'historique pendant`,historyRetentionDescription:`Les anciennes données seront supprimées.`,defaultPrintOptions:`Options d'impression par défaut`,defaultPrintOptionsDescription:`Définir les valeurs par défaut des options d'impression. Modifiables dans la boîte de dialogue d'impression.`,defaultBedLevelling:`Nivellement du lit`,defaultBedLevellingDesc:`Niveler automatiquement le lit avant l'impression`,defaultFlowCali:`Calibration du flux`,defaultFlowCaliDesc:`Calibrer le flux d'extrusion`,defaultVibrationCali:`Calibration des vibrations`,defaultVibrationCaliDesc:`Réduire les artefacts de ringing`,defaultLayerInspect:`Inspection première couche`,defaultLayerInspectDesc:`Inspection IA de la première couche`,defaultTimelapse:`Time-lapse`,defaultTimelapseDesc:`Enregistrer une vidéo timelapse`,defaultNozzleOffsetCali:`Calibration du décalage des buses`,defaultNozzleOffsetCaliDesc:`Calibrer les décalages entre les buses`,tempFanPresetsTitle:`Préréglages de température et de ventilateur`,tempFanPresetsDescription:`Personnalisez les valeurs de sélection rapide affichées dans les fenêtres contextuelles de température et de vitesse du ventilateur de la carte imprimante. Le bouton Arrêt est toujours affiché.`,tempFanPresetsNozzle:`Température de la buse`,tempFanPresetsBed:`Température du plateau`,tempFanPresetsChamber:`Température de la chambre`,tempFanPresetsFan:`Vitesse du ventilateur`,tempFanPresetsReset:`Rétablir les valeurs par défaut`,concurrentUploadsTitle:`Envois simultanés`,concurrentUploadsDescription:`Nombre d'imprimantes auxquelles la file d'attente peut envoyer des fichiers en même temps. Les imprimantes reçoivent les fichiers lentement (une grosse impression peut prendre plusieurs minutes) et chacune attend son tour : sur un parc important, augmenter cette valeur évite que la dernière imprimante d'un lot doive attendre la fin de tous les transferts précédents. Réduisez-la si votre réseau ou votre hôte Bambuddy supporte mal les transferts parallèles.`,concurrentUploadsLabel:`Imprimantes servies simultanément`,concurrentUploadsHelp:`1 n'envoie qu'à une imprimante à la fois (l'ancien comportement). Valeur par défaut : 4.`,staggeredStart:`Démarrage échelonné`,staggeredStartDescription:`Taille de groupe et intervalle par défaut lors de l'échelonnement des démarrages de lots multi-imprimantes. Modifiable par lot dans la fenêtre d'impression.`,preheatTitle:`Préchauffage & Heat Soak`,preheatDescription:`Chauffe le plateau (et la chambre, si pris en charge) et maintient la température avant le démarrage de chaque impression de la file. Utile pour les filaments techniques (PA, ABS) sur les imprimantes sans chauffage actif de la chambre — le plateau chauffe la chambre par rayonnement pendant que le minuteur de soak s'écoule. La température cible du plateau provient du fichier d'impression ; le comportement de la chambre dépend du modèle d'imprimante.`,preheatEnabled:`Activer préchauffage & soak`,preheatEnabledDesc:`Si désactivé, les impressions en file démarrent immédiatement. Chaque élément peut surcharger par impression.`,preheatFilamentTargetsLabel:`Cible chambre par filament (°C)`,preheatFilamentTargetsHint:`Bambuddy choisit la cible la plus haute parmi les slots AMS chargés. Une impression dont tous les slots donnent 0 — PLA, PETG, TPU, PVA — saute entièrement le préchauffage et démarre immédiatement.`,preheatFilamentTargetsReset:`Restaurer les valeurs par défaut`,preheatFilamentTargetsDefaultRow:`Autre / non mappé`,preheatMaxWait:`Attente max (secondes)`,preheatMaxWaitHelp:`Plafond de la phase de chauffe de la chambre avant passage au soak.`,preheatSoak:`Soak (secondes)`,preheatSoakHelp:`Maintien après l'atteinte de la cible ou l'expiration de l'attente max.`,preheatHardwareTitle:`Comportement par imprimante :`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E chauffent activement la chambre via M141. X1C/P2S lisent la température mais ne chauffent la chambre que par rayonnement du plateau. P1S/P1P/A1/A1 Mini n'ont pas de capteur de chambre — seul le minuteur de soak s'applique.`,preheatPerItemDesc:`Chauffe le plateau et la chambre avant le démarrage de cette impression. Utilise par défaut le commutateur global de Paramètres → Workflow.`,preheatOverride_inherit:`Hériter`,preheatOverride_on:`Activé`,preheatOverride_off:`Désactivé`,calibrationMode_off:`Désactivé`,calibrationMode_on:`Activé`,calibrationMode_auto:`Auto`,preheatTargetOverride:`Surcharger la cible chambre (°C, vide = par filament)`,preheatTargetOverrideHelp:`0 chauffe le plateau et exécute le maintien sans la chambre. Laissé vide, une impression sans besoin de chambre saute entièrement le préchauffage.`,plateClear:`Confirmation de plateau libre`,requirePlateClear:`Exiger la confirmation de plateau libre`,requirePlateClearDescription:`Lorsque cette option est activée, le planificateur attend une confirmation de plateau libre par imprimante avant de lancer les impressions en file d'attente sur les imprimantes ayant terminé. La désactiver masque également le badge d'état du plateau et le bouton « Marquer le plateau comme dégagé » sur les cartes d'imprimante.`,keepBedWarm:`Maintenir le plateau chaud entre les impressions`,keepBedWarmDesc:`En attendant la confirmation de plateau libéré, maintient le plateau à la température de maintien au chaud ci-dessous pour que la chambre reste chaude — ou à la température de plateau de l'impression suivante si elle est plus élevée. S'applique uniquement lorsque l'impression suivante nécessite un chauffage de chambre (ASA, ABS, PA, PC, etc.). Nécessite l'activation de la confirmation de plateau libéré.`,keepWarmBedTemp:`Température du plateau en maintien au chaud (°C)`,keepWarmBedTempHelp:`Utilisé lorsque le plateau sert à chauffer la chambre : pendant le maintien au chaud et lors du préchauffage si le fichier d'impression ne contient pas de température de plateau. Une température plus élevée issue du fichier est toujours prioritaire.`,keepWarmMaxMinutes:`Arrêter le maintien au chaud après (minutes)`,keepWarmMaxMinutesHelp:`Si le plateau n'est pas libéré dans ce délai, les chauffages sont coupés au lieu d'être maintenus indéfiniment.`,gcodeInjection:`Injection de G-code`,gcodeInjectionDescription:`Configurez du G-code personnalisé à injecter au début et/ou à la fin des impressions pour les systèmes d'auto-impression comme Farmloop, SwapMod, AutoClear et Printflow 3D. Les snippets sont configurés par modèle d'imprimante et appliqués lorsque « Injecter le G-code » est activé sur un élément de file d'attente.`,gcodeInjectionNoPrinters:`Aucune imprimante trouvée. Ajoutez des imprimantes pour configurer les snippets G-code.`,gcodeStartLabel:`G-code de début`,gcodeEndLabel:`G-code de fin`,gcodeStartPlaceholder:`G-code ajouté avant le début de l'impression...`,gcodeEndPlaceholder:`G-code ajouté après la fin de l'impression...`,staggerGroupSize:`Taille du groupe`,staggerGroupSizeHelp:`Imprimantes à démarrer simultanément par groupe`,staggerInterval:`Intervalle (minutes)`,staggerIntervalHelp:`Délai entre chaque démarrage de groupe`,queueDrying:`Séchage automatique`,queueDryingDescription:`Sécher automatiquement le filament AMS lorsque l'imprimante est inactive entre les impressions. Utilise le seuil d'humidité ci-dessus.`,queueDryingEnabled:`Activer le séchage automatique`,queueDryingEnabledDescription:`Démarrer le séchage AMS automatiquement lorsque l'imprimante est inactive et l'humidité dépasse le seuil`,queueDryingBlock:`Attendre la fin du séchage`,queueDryingBlockDescription:`Bloquer la file d'attente jusqu'à la fin du séchage. Désactivé, les impressions sont prioritaires.`,ambientDryingEnabled:`Séchage ambiant`,ambientDryingEnabledDescription:`Sécher automatiquement le filament sur les imprimantes inactives lorsque l'humidité dépasse le seuil, même sans impressions en file.`,printDryingEnabled:`Séchage pendant l'impression`,printDryingEnabledDescription:`Autorise le séchage automatique à continuer pendant une impression sur le matériel pris en charge (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L avec firmware récent). La température de séchage est automatiquement limitée à 5°C sous le préréglage en attente pour protéger les bobines.`,dryingPresets:`Préréglages de séchage`,dryingPresetsDescription:`Température et durée par type de filament. AMS 2 Pro utilise des températures plus basses, AMS-HT supporte des températures plus élevées.`,dryingFilament:`Filament`,humidityThresholds:`Seuils d'humidité`,humidityThresholdsDescription:`Déclencheur d'humidité par type de filament pour le séchage auto et les alarmes. Charges mixtes dans un AMS utilisent le seuil le plus bas.`,humidityThresholdCol:`Seuil`,humidityThresholdDefault:`Par défaut (types inconnus)`,printModal:`Fenêtre d'impression`,expandCustomMapping:`Étendre le mapping personnalisé par défaut`,expandCustomMappingDescription:`Affiche le mapping AMS par imprimante étendu.`,authentication:`Authentification`,authEnabledDescription:`L'instance est sécurisée`,authDisabledDescription:`Activez pour restreindre l'accès`,authDisabledMessage:`Activez l'authentification pour gérer comptes et permissions.`,enableAuthentication:`Activer l'authentification`,currentUser:`Utilisateur actuel`,changePassword:`Changer le mot de passe`,admin:`Administrateur`,users:`Utilisateurs`,addUser:`Ajouter un utilisateur`,groups:`Groupes`,addGroup:`Ajouter un groupe`,system:`Système`,noDescription:`Pas de description`,userCount:`{{count}} utilisateurs`,permissionCount:`{{count}} permissions`,createUser:`Créer un utilisateur`,username:`Nom d'utilisateur`,enterUsername:`Entrez l'utilisateur`,password:`Mot de passe`,enterPassword:`Entrez le mot de passe`,passwordRequirements:`Au moins 8 caractères, avec une majuscule, une minuscule, un chiffre et un caractère spécial.`,confirmPassword:`Confirmer le mot de passe`,confirmPasswordPlaceholder:`Confirmez le mot de passe`,viewReleaseOnGitHub:`Voir la version sur GitHub`,turnAllPlugsOn:`Tout allumer`,turnAllPlugsOff:`Tout éteindre`,clearNotificationLogs:`Effacer les journaux`,clearLogsMessage:`Efface définitivement les logs de plus de 30 jours.`,clearLogs:`Effacer les logs`,resetUiPreferences:`Réinitialiser l'UI`,resetUiPreferencesMessage:`Réinitialise l'ordre, thème, widgets, etc. N'affecte pas vos données.`,resetPreferences:`Réinitialiser`,deleteGroupTitle:`Supprimer le groupe`,deleteGroupMessage:`Les utilisateurs de ce groupe perdront ces permissions.`,deleteGroup:`Supprimer le groupe`,disableAuthenticationTitle:`Désactiver l'authentification`,disableAuthenticationMessage:`Instance accessible sans connexion. Les comptes sont conservés.`,disableAuthentication:`Désactiver`,configureBambuddy:`Configurer Bambuddy`,systemDefault:`Défaut système`,archiveSettings:`Réglages Archives`,newWindow:`Nouvelle fenêtre`,embeddedOverlay:`Superposition intégrée`,preferredSlicer:`Slicer préféré`,preferredSlicerDescription:`Slicer utilisé pour le tranchage intégré via le sidecar API`,openInSlicerLabel:`Ouvrir dans le slicer`,openInSlicerInherit:`Identique au slicer API`,openInSlicerDescription:`Slicer de bureau utilisé par le bouton « Ouvrir dans le slicer ». Laissez sur « Identique au slicer API » pour hériter, ou choisissez un slicer différent pour un usage local.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev ont des bugs CLI connus qui bloquent le découpage de nombreux 3MF créés par Bambu — voir les issues amont #12426 (segfault sur fichiers multi-extrudeurs peints) et #13386 (rejet de validation stricte des plages de paramètres). Bambu Studio est recommandé jusqu'à ce que les correctifs amont arrivent.`,useSlicerApi:`Utiliser l'API Slicer`,useSlicerApiDescription:`Lorsque activé, les actions "Slice" ouvrent le slicer intégré et appellent le sidecar slicer-API. Lorsque désactivé (par défaut), elles redirigent vers le slicer desktop via le schéma URI.`,slicerCard:`Slicer`,orcaslicerApiUrl:`OrcaSlicer sidecar URL`,bambuStudioApiUrl:`Bambu Studio sidecar URL`,slicerStallTimeout:`Delai d'inactivite du trancheur (minutes)`,slicerStallTimeoutDescription:`Abandonne un decoupage apres cette duree sans progression du sidecar. Les modeles lourds qui continuent a signaler leur progression ne sont jamais interrompus, quel que soit le temps necessaire. Les sidecars qui ne signalent pas de progression utilisent cette valeur comme limite de duree totale.`,slicerApiUrlDescription:`URL du conteneur sidecar slicer-API. Laisser vide pour utiliser les variables d'environnement SLICER_API_URL / BAMBU_STUDIO_API_URL.`,externalCameras:`Caméras externes`,costTracking:`Suivi des coûts`,printsOnly:`Impressions uniquement`,totalConsumption:`Consommation totale`,dataManagement:`Gestion des données`,storageUsage:`Utilisation du stockage`,storageUsageDescription:`Répartition de l'utilisation des données par catégorie`,storageUsageTotal:`Total`,storageUsageErrors:`Erreurs`,storageUsageOtherBreakdown:`Autre (inclut ressources statiques, scripts et fichiers de configuration)`,storageUsageSystem:`Système`,storageUsageData:`Données`,storageUsageUnavailable:`Informations d'utilisation du stockage non disponibles`,clearNotificationLogsDescription:`Supprimer logs de plus de 30 jours`,resetUiPreferencesDescription:`Réinitialise thèmes et affichage sans toucher aux données.`,enableHomeAssistant:`Activer Home Assistant`,enableMqtt:`Activer MQTT`,useTls:`Utiliser TLS`,enableMetricsEndpoint:`Activer l'endpoint Metrics`,availableMetrics:`Metrics disponibles`,billingEnabled:`Activer la facturation`,billingEnabledDescription:`Facturer les utilisateurs pour les impressions et activer les fonctionnalités financières`,printerKillSwitch:`Interrupteur d'arrêt automatique`,printerKillSwitchDescription:`Arrêter immédiatement les impressions qui démarrent sans autorisation`,financeBudgetReset:`Réinitialisation mensuelle du budget financier`,financeBudgetResetDay:`Jour de réinitialisation`,financeBudgetResetDayHelp:`Pour les mois courts, la réinitialisation utilise le dernier jour du mois.`,financeBudgetResetTimezone:`Fuseau horaire de réinitialisation`,financeBudgetResetTimezoneHelp:`Le fuseau horaire utilisé pour déterminer le moment de la réinitialisation du budget chaque mois.`,rebuildLedger:`Reconstruire le grand livre du portefeuille`,rebuildLedgerStarted:`Reconstruction du grand livre commencée`,rebuildLedgerConfirmTitle:`Reconstruire le grand livre du portefeuille?`,rebuildLedgerConfirmMessage:`Cela reconstruira le grand livre du portefeuille pour réparer les valeurs de solde historiques. Exécutez ceci uniquement si vous savez ce que vous faites.`,rebuildLedgerInProgress:`Reconstruction en cours de démarrage...`,editUser:`Modifier l'utilisateur`,deleteUserTitle:`Supprimer l'utilisateur`,groupName:`Nom du groupe`,leaveEmptyForAnonymous:`Vide pour anonyme`,leaveEmptyForNoAuth:`Vide si pas d'auth`,enterNewPassword:`Nouveau mot de passe`,confirmNewPassword:`Confirmer nouveau mdp`,enterGroupName:`Entrez le nom du groupe`,enterDescriptionOptional:`Description (optionnel)`,enterCurrentPassword:`Mdp actuel`,enterNewPasswordMin6:`Nouveau mdp (min 6 char)`,toast:{keyCopied:`Clé copiée`,copyFailed:`Échec copie`,keyAddedToBrowser:`Clé ajoutée à l'explorateur`,clearLogsFailed:`Échec effacement logs`,uiPreferencesReset:`Préférences UI réinitialisées. Rafraîchissement...`,authDisabled:`Authentification désactivée`,authDisableFailed:`Échec désactivation`,apiKeyCreated:`Clé API créée`,apiKeyDeleted:`Clé API supprimée`,userCreated:`Utilisateur créé`,userUpdated:`Utilisateur mis à jour`,userDeleted:`Utilisateur supprimé`,groupCreated:`Groupe créé`,groupUpdated:`Groupe mis à jour`,groupDeleted:`Groupe supprimé`,fillRequiredFields:`Remplissez les champs requis`,passwordsDoNotMatch:`Les mots de passe ne correspondent pas`,passwordTooShort:`Le mot de passe doit contenir au moins 8 caractères`,passwordNeedsUppercase:`Le mot de passe doit contenir au moins une majuscule`,passwordNeedsLowercase:`Le mot de passe doit contenir au moins une minuscule`,passwordNeedsDigit:`Le mot de passe doit contenir au moins un chiffre`,passwordNeedsSpecial:`Le mot de passe doit contenir au moins un caractère spécial`,enterGroupName:`Entrez un nom de groupe`,settingsSaved:`Paramètres enregistrés`,noPermissionUpdate:`Vous n'avez pas l'autorisation de modifier les paramètres`,cameraSettingsSaved:`Réglages caméra enregistrés`,enterCameraUrl:`Entrez une URL caméra`,passwordChanged:`Mot de passe modifié`,connectionFailed:`Échec connexion`,testFailed:`Échec test`,cameraConnected:`Caméra connectée {{resolution}}`,cameraConnectedCoalesced:`Caméra connectée {{resolution}} (partagée avec une capture déjà en cours)`},testConnection:`Tester la connexion`,catalog:{spoolCatalog:`Catalogue de Bobines`,spoolCatalogDescription:`Poids des bobines vides par marque/type. Utilisé pour le calcul auto du poids restant.`,searchCatalog:`Chercher dans le catalogue...`,addNewEntry:`Nouvelle Entrée`,namePlaceholder:`Nom (ex: Bambu Lab - Plastique)`,weight:`Poids`,type:`Type`,default:`Défaut`,custom:`Perso`,noMatch:`Aucune entrée correspondante`,empty:`Catalogue vide`,deleteEntry:`Supprimer l'entrée`,deleteConfirm:`Supprimer "{{name}}" ?`,resetCatalog:`Réinitialiser le catalogue`,resetConfirm:`Réinitialiser aux valeurs par défaut ? Vos entrées personnalisées seront supprimées.`,loadFailed:`Échec chargement catalogue`,nameWeightRequired:`Nom et poids requis`,entryAdded:`Entrée ajoutée`,addFailed:`Échec ajout`,entryUpdated:`Entrée mise à jour`,updateFailed:`Échec mise à jour`,entryDeleted:`Entrée supprimée`,deleteFailed:`Échec suppression`,resetSuccess:`Catalogue réinitialisé`,resetFailed:`Échec réinitialisation`,exported:`{{count}} entrées exportées`,imported:`{{added}} entrées importées ({{skipped}} ignorées)`,importFailed:`Échec import : format JSON invalide`,exportTooltip:`Exporter en JSON`,importTooltip:`Importer depuis JSON`,resetTooltip:`Réinitialiser par défaut`,selectedCount:`{{count}} sélectionnés`,deleteSelected:`Supprimer la sélection`,bulkDeleteConfirm:`Supprimer {{count}} entrées ?`,bulkDeleted:`{{count}} entrées supprimées`,bulkDeleteFailed:`Échec de la suppression`,material:`Matériau`,spoolWeight:`Poids bobine`,color:`Couleur`,updateSpoolWeight:`Mettre à jour le poids bobine`,filamentUpdated:`Filament mis à jour`,filamentUpdateFailed:`Échec de la mise à jour du filament`,filamentUpdateInvalid:`Données de filament invalides`,keepExistingSpoolWeight:`Conserver l'ancien poids pour les bobines existantes`,keepExistingSpoolWeightDesc:`Les bobines déjà créées avec ce type de filament conservent l'ancien poids à vide. Les nouvelles bobines utilisent la valeur mise à jour.`,applyToAllSpools:`Appliquer à toutes les bobines`,applyToAllSpoolsDesc:`Tous les calculs de poids pour ce type de filament utilisent immédiatement le nouveau poids à vide.`},colorCatalog:{title:`Catalogue de Couleurs`,description:`Couleurs de filament par fabricant. Utilisé pour la recherche auto lors de l'ajout de bobines.`,searchColors:`Chercher couleurs...`,allManufacturers:`Tous les fabricants`,addNewColor:`Nouvelle Couleur`,manufacturer:`Fabricant`,colorName:`Nom couleur`,hex:`Hex`,materialOptional:`Matériau (optionnel)`,showing:`Affichage {{filtered}} sur {{total}} couleurs`,noMatch:`Aucune couleur correspondante`,empty:`Catalogue vide`,deleteColor:`Supprimer couleur`,deleteConfirm:`Supprimer "{{name}}" ?`,resetCatalog:`Réinitialiser catalogue couleurs`,resetConfirm:`Réinitialiser aux valeurs par défaut ?`,sync:`Synchro.`,starting:`Démarrage...`,syncTooltip:`Sync depuis FilamentColors.xyz (2000+ couleurs, peut être long)`,loadFailed:`Échec chargement catalogue couleurs`,fieldsRequired:`Fabricant, nom et code Hex requis`,colorAdded:`Couleur ajoutée`,addFailed:`Échec ajout`,colorUpdated:`Couleur mise à jour`,updateFailed:`Échec mise à jour`,colorDeleted:`Couleur supprimée`,deleteFailed:`Échec suppression`,resetSuccess:`Catalogue réinitialisé`,resetFailed:`Échec réinitialisation`,syncUpToDate:`Déjà à jour ({{count}} couleurs vérifiées)`,syncComplete:`{{added}} couleurs ajoutées ({{skipped}} déjà présentes)`,syncError:`Erreur de sync`,syncFailed:`Échec sync FilamentColors.xyz`,exported:`{{count}} couleurs exportées`,imported:`{{added}} couleurs importées ({{skipped}} ignorées)`,importFailed:`Échec import : format JSON invalide`,selectedCount:`{{count}} sélectionnés`,deleteSelected:`Supprimer la sélection`,bulkDeleteConfirm:`Supprimer {{count}} couleurs ?`,bulkDeleted:`{{count}} couleurs supprimées`,bulkDeleteFailed:`Échec de la suppression des couleurs`},dateFormat:`Format de date`,dateFormatUs:`US (MM/JJ/AAAA)`,dateFormatEu:`EU (JJ/MM/AAAA)`,dateFormatIso:`ISO (AAAA-MM-JJ)`,timeFormat:`Format horaire`,timeFormat12:`12 heures (3:30 PM)`,timeFormat24:`24 heures (15:30)`,defaultPrinter:`Imprimante par défaut`,defaultPrinterDescription:`Présélectionner cette imprimante pour les téléversements, réimpressions et autres opérations.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Utilisez la disposition de la barre latérale pour réorganiser les éléments, réinitialiser la visibilité et gérer les liens personnalisés.`,setDefault:`Définir par défaut`,sidebarOrderSetDefaultHint:`Définir par défaut applique l'ordre actuel du menu aux utilisateurs qui n'ont pas encore personnalisé le leur.`,sidebarDefaultSet:`L'ordre du menu par défaut a été défini.`,sidebarDefaultCleared:`Ordre du menu par défaut effacé.`,sidebarDefaultFailed:`Échec de la définition de l'ordre du menu par défaut.`,reset:`Réinitialiser`,darkMode:`Mode sombre`,lightMode:`Mode clair`,active:`(actif)`,background:`Arrière-plan`,accent:`Accent`,style:`Style`,bgNeutral:`Neutre`,bgWarm:`Chaud`,bgCool:`Froid`,bgOled:`OLED Noir`,bgSlate:`Bleu ardoise`,bgForest:`Vert forêt`,accentGreen:`Vert`,accentTeal:`Sarcelle`,accentBlue:`Bleu`,accentOrange:`Orange`,accentPurple:`Violet`,accentRed:`Rouge`,styleClassic:`Classique`,styleGlow:`Lumineux`,styleVibrant:`Vif`,themeToggleHint:`Basculer entre le mode sombre, clair et système avec l'icône dans la barre latérale.`,progressInTitle:`Progression dans l'onglet`,progressInTitleDescription:`Affiche le pourcentage de l'impression en cours et un anneau de progression dans l'onglet du navigateur.`,autoArchivePrints:`Archiver automatiquement les impressions`,autoArchiveDescription:`Sauvegarder automatiquement les fichiers 3MF à la fin des impressions`,saveThumbnailsDescription:`Extraire et sauvegarder les images d'aperçu des fichiers 3MF`,captureFinishPhotoDescription:`Prendre une photo avec la caméra de l'imprimante à la fin de l'impression. Bambuddy enregistre un court timelapse pendant l'impression afin que la photo puisse provenir du moment précédant l'abaissement du plateau ; le fichier du timelapse est conservé si vous avez activé le timelapse pour cette impression, sinon il est supprimé automatiquement après la capture de la photo.`,finishPhotoRestorePlate:`Remonter le plateau pour la photo finale`,finishPhotoRestorePlateDescription:`L'imprimante abaisse le plateau d'environ 100 mm à la fin d'une impression, plaçant l'objet terminé sous le cadrage de la caméra. Bambuddy le remonte juste au-dessus de la dernière couche imprimée, prend la photo, puis le rabaisse. Ignoré si la hauteur d'impression est inconnue ou si un autre travail est en file d'attente.`,ffmpegNotInstalled:`ffmpeg non installé`,ffmpegRequired:`La capture caméra nécessite ffmpeg. Installez-le via <brew>brew install ffmpeg</brew> (macOS) ou <apt>apt install ffmpeg</apt> (Linux).`,camera:`Caméra`,cameraViewMode:`Mode d'affichage caméra`,cameraOverlayDescription:`La caméra s'ouvre dans un overlay redimensionnable sur l'écran principal`,cameraWindowDescription:`La caméra s'ouvre dans une fenêtre de navigateur séparée`,externalCamerasDescription:`Configurer des caméras externes pour remplacer la caméra intégrée. Supporte les flux MJPEG, RTSP, snapshots HTTP et caméras USB (V4L2). Lorsqu'activée, la caméra externe est utilisée pour la vue en direct et les photos de fin.`,cameraPlaceholderUsb:`Chemin du périphérique (/dev/video0)`,cameraPlaceholderUrl:`URL caméra (rtsp://... ou http://...)`,cameraTypeMjpeg:`Flux MJPEG`,cameraTypeRtsp:`Flux RTSP`,cameraTypeSnapshot:`Snapshot HTTP`,cameraTypeUsb:`Caméra USB (V4L2)`,cameraSnapshotUrl:`URL de capture (facultatif)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`URL d'image unique utilisée pour les miniatures de notification, photos de fin, frames de timelapse par couche et détection de plaque. Le timelapse et la détection de plaque nécessitent chacun leur propre bascule par imprimante — cette URL est juste la source d'image qu'ils utilisent lorsqu'activés. Laisser vide pour capturer depuis le flux en direct ci-dessus. Utile pour go2rtc (/api/frame.jpeg) et caméras IP avec un point de terminaison de capture dédié.`,cameraRotation:`Rotation`,test:`Tester`,connected:`Connecté`,disconnected:`Déconnecté`,currency:`Devise`,defaultFilamentCost:`Coût filament par défaut (par kg)`,electricityCost:`Coût électricité par kWh`,energyDisplayMode:`Mode d'affichage énergie`,energyModePrintDescription:`Le tableau de bord affiche la somme de l'énergie utilisée pendant les impressions`,energyModeTotalDescription:`Le tableau de bord affiche l'énergie totale des prises connectées`,fileManager:`Gestionnaire de fichiers`,createArchiveEntry:`Créer une entrée d'archive lors de l'impression`,createArchiveEntryDescription:`Lors de l'impression depuis le gestionnaire de fichiers, créer optionnellement une entrée d'archive`,lowDiskSpaceWarning:`Avertissement espace disque faible`,lowDiskSpaceDescription:`Afficher un avertissement lorsque l'espace disque libre descend sous ce seuil`,printerFirmware:`Firmware imprimante`,checkFirmwareDescription:`Vérifier les mises à jour firmware de Bambu Lab`,bambuddySoftware:`Logiciel Bambuddy`,autoCheckDescription:`Vérifier automatiquement les nouvelles versions au démarrage`,checkNow:`Vérifier maintenant`,updateAvailableVersion:`Mise à jour disponible : v{{version}}`,releaseNotes:`Notes de version`,updateViaDocker:`Mettre à jour via Docker Compose :`,composeDirectory:`Répertoire Compose`,composeDirectoryHint:`Répertoire contenant votre docker-compose.yml. Laissez vide pour omettre le cd.`,copyUpdateCommand:`Copier la commande de mise à jour`,updateViaHomeAssistant:`Les mises à jour sont gérées par le superviseur Home Assistant. Ouvrez Paramètres → Modules complémentaires → Bambuddy dans Home Assistant pour installer la nouvelle version.`,updateViaWindowsInstaller:`Les installations Windows se mettent à jour en relançant l'installateur. Téléchargez la nouvelle version ci-dessous — vos données, paramètres et imprimantes sont préservés.`,downloadWindowsInstaller:`Télécharger l'installateur pour la v{{version}}`,installUpdate:`Installer la mise à jour`,latestVersionRunning:`Vous utilisez la dernière version`,failedToCheckUpdates:`Échec de la vérification des mises à jour : {{error}}`,backupRestore:`Sauvegarde & Restauration`,backupRestoreDescription:`Exporter/importer les paramètres et configurer la sauvegarde GitHub`,goToBackup:`Aller à la sauvegarde`,externalUrl:`URL externe`,externalUrlDescription:`L'URL externe où Bambuddy est accessible. Utilisée pour les images de notification et les intégrations externes.`,bambuddyUrl:`URL Bambuddy`,externalUrlHint:`Inclure le protocole et le port (ex : http://192.168.1.100:8000)`,ftpRetry:`Réessai FTP`,ftpRetryDescription:`Réessayer les opérations FTP lorsque le WiFi de l'imprimante est instable. S'applique aux téléchargements 3MF, uploads d'impression, téléchargements timelapse et mises à jour firmware.`,autoRetryDescription:`Réessayer automatiquement les opérations FTP échouées`,retryAttempts:`Tentatives de réessai`,retryDelay:`Délai de réessai`,connectionTimeout:`Délai de connexion`,time_one:`{{count}} fois`,time_other:`{{count}} fois`,second_one:`{{count}} seconde`,second_other:`{{count}} secondes`,nSeconds:`{{count}} secondes`,increaseForWeakWifi:`Augmenter pour les imprimantes avec un WiFi faible`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Se connecter à Home Assistant pour contrôler les prises connectées via l'API REST HA. Supporte les entités switch, light, input_boolean et script.`,homeAssistantUrl:`URL Home Assistant`,longLivedAccessToken:`Token d'accès longue durée`,haTokenHint:`Créer un token dans HA : Profil → Tokens d'accès longue durée → Créer un token`,connectionSuccessful:`Connexion réussie`,connectionFailed:`Connexion échouée`,haConnectionSuccess:`Connexion à Home Assistant réussie.`,haConnectionFailed:`Échec de la connexion à Home Assistant.`,mqttPublishing:`Publication MQTT`,mqttDescription:`Publier les événements BamBuddy vers un broker MQTT externe pour l'intégration avec Node-RED, Home Assistant et d'autres systèmes d'automatisation.`,mqttEnableDescription:`Publier les événements vers un broker MQTT externe`,brokerHostname:`Nom d'hôte du broker`,port:`Port`,usernameOptional:`Nom d'utilisateur (optionnel)`,passwordOptional:`Mot de passe (optionnel)`,topicPrefix:`Préfixe de topic`,topicPrefixHint:`Les topics seront : {{prefix}}/printers/<serial>/status, etc.`,prometheusMetrics:`Métriques Prometheus`,prometheusEndpointDescription:`Exposer les métriques imprimante sur <code>/api/v1/metrics</code> pour la surveillance Prometheus/Grafana.`,bearerTokenOptional:`Token Bearer (optionnel)`,bearerTokenHint:`Si défini, les requêtes doivent inclure <code>Authorization: Bearer <token></code>`,metricsConnectionStatus:`État de connexion`,metricsPrinterState:`État imprimante (idle/printing/etc)`,metricsPrintProgress:`Progression impression 0-100%`,metricsBedTemp:`Température du plateau`,metricsNozzleTemp:`Température de la buse`,metricsPrintsTotal:`Total impressions par résultat`,metricsMore:`...et plus (couches, ventilateurs, file d'attente, utilisation filament)`,smartPlugsDescription:`Connecter des prises connectées (Tasmota ou Home Assistant) pour automatiser le contrôle de l'alimentation et suivre la consommation d'énergie de vos imprimantes.`,allOn:`Tout allumer`,allOff:`Tout éteindre`,addSmartPlug:`Ajouter une prise`,energySummary:`Résumé énergétique`,currentPower:`Puissance actuelle`,plugsOnline:`{{reachable}}/{{total}} prises en ligne`,today:`Aujourd'hui`,yesterday:`Hier`,total:`Total`,enablePlugsForSummary:`Activer les prises pour voir le résumé énergétique`,addNotificationProvider:`Ajouter`,systemBadge:`(Système)`,creating:`Création...`,changing:`Modification...`,deleteUserAndItems:`Supprimer l'utilisateur ET ses éléments`,deleteUserKeepItems:`Supprimer l'utilisateur, garder les éléments (deviennent sans propriétaire)`,ok:`OK`,twoFa:{totpTitle:`Application Authenticator (TOTP)`,totpDesc:`Utilisez une application comme Google Authenticator, Aegis ou Authy.`,emailOtpTitle:`OTP par e-mail`,emailOtpDesc:`Envoyez un code à usage unique à {{email}} lors de la connexion.`,emailOtpNoEmail:`Ajoutez une adresse e-mail à votre compte pour activer cette méthode.`,addEmailFirst:`Votre compte n'a pas d'adresse e-mail. Demandez à un administrateur d'en ajouter une.`,setupTotp:`Configurer l'application Authenticator`,setupAuthApp:`Configurer l'application Authenticator`,setupInstructions:`Scannez le QR code avec votre application authenticator, puis confirmez avec un code.`,manualEntry:`Impossible de scanner ? Entrez ce secret manuellement :`,scannedContinue:`Code scanné — continuer`,enterCodeToConfirm:`Entrez le code à 6 chiffres de votre application authenticator pour confirmer.`,activate:`Activer`,disableTotp:`Désactiver l'Authenticator`,disableConfirmHint:`Entrez un code TOTP valide ou un code de secours pour désactiver l'authenticator.`,totpDisabled:`Application Authenticator désactivée.`,emailOtpEnabled:`OTP par e-mail activé.`,emailOtpDisabled:`OTP par e-mail désactivé.`,smtpRequired:`Veuillez d'abord configurer et tester les paramètres SMTP.`,invalidCode:`Code invalide. Veuillez réessayer.`,enableEmailOtp:`Activer OTP par e-mail`,disableEmailOtp:`Désactiver OTP par e-mail`,emailSetupEnterCode:`Un code de vérification a été envoyé à votre adresse e-mail. Entrez-le ci-dessous pour confirmer que vous possédez cette boîte de réception.`,verifyAndEnable:`Vérifier et activer`,emailDisablePasswordHint:`Entrez le mot de passe de votre compte pour confirmer la désactivation de l'OTP par e-mail.`,passwordPlaceholder:`Entrez votre mot de passe`,backupCodesTitle:`Sauvegardez vos codes de secours`,backupCodesWarning:`Conservez ces codes en lieu sûr. Chaque code ne peut être utilisé qu'une seule fois et ne sera plus affiché.`,backupCodesRemaining:`{{count}} codes de secours restants`,savedCodes:`Codes sauvegardés`,regenBackup:`Régénérer les codes de secours`,regenBackupHint:`Entrez votre code TOTP actuel pour générer 10 nouveaux codes de secours. Tous les codes existants seront invalidés.`,newBackupCodes:`Nouveaux codes de secours`,linkedAccounts:`Comptes SSO liés`,linkedAccountsDesc:`Ces fournisseurs d'identité externes sont liés à votre compte.`,oidcUnlinked:`Compte dissocié.`},sessionPolicy:{title:`Politique de session`,description:`Durée maximale des sessions pour les nouvelles connexions utilisateur. Les jetons déjà émis conservent leur expiration d'origine.`,preset24h:`24 heures`,preset7d:`7 jours`,preset30d:`30 jours`,customHoursLabel:`Durée de session personnalisée en heures`,hoursSuffix:`heures`,warning:`Les sessions plus longues réduisent la protection de déconnexion automatique. Recommandé uniquement pour les déploiements mono-utilisateur de confiance.`},oidc:{title:`Fournisseurs SSO / OIDC`,desc:`Configurez des fournisseurs OpenID Connect pour l'authentification unique.`,addProvider:`Ajouter un fournisseur`,newProvider:`Nouveau fournisseur`,empty:`Aucun fournisseur OIDC configuré.`,created:`Fournisseur créé.`,updated:`Fournisseur mis à jour.`,deleted:`Fournisseur supprimé.`,refreshIcon:`Actualiser l'icône`,removeIcon:`Supprimer l'icône`,iconRefreshed:`Icône actualisée.`,iconRemoved:`Icône supprimée.`,iconFetchFailed:`Impossible de récupérer l'icône depuis l'URL du fournisseur.`,deleteTitle:`Supprimer le fournisseur`,deleteMessage:`Supprimer "{{name}}" ? Tous les comptes liés seront déconnectés.`,form:{name:`Nom d'affichage`,issuerUrl:`URL de l'émetteur`,clientId:`ID client`,clientSecret:`Secret client`,scopes:`Portées`,iconUrl:`URL de l'icône (optionnel)`,enabled:`Activé`,autoCreate:`Créer les utilisateurs automatiquement`,autoCreateDesc:`Crée automatiquement un compte local lors de la première connexion.`,autoLink:`Lier automatiquement les comptes existants`,autoLinkDesc:`Lie les comptes locaux existants par e-mail lors de la première connexion.`,secretHint:`laisser vide pour conserver`,secretPlaceholder:`nouveau secret`,emailClaim:`Claim e-mail`,emailClaimDesc:`Claim JWT utilisé comme identité e-mail. Utiliser 'preferred_username' ou 'upn' pour Azure Entra ID (qui n'envoie pas email_verified). Utiliser uniquement des noms de claims de confiance.`,emailClaimPlaceholder:`e-mail`,emailClaimCustomClaimAutoLinkWarning:`Les revendications personnalisées sont sûres pour la liaison auto uniquement lorsque la valeur est administrée par le tenant (par ex. Azure Entra ID upn / preferred_username). N'activez pas la liaison auto si votre IdP permet aux utilisateurs de s'auto-attribuer cette revendication.`,requireEmailVerified:`Exiger la vérification e-mail`,requireEmailVerifiedDesc:`N'accepter le claim e-mail que si le fournisseur le marque comme vérifié.`,requireEmailVerifiedWarning:`Avertissement : l'e-mail sera accepté sans vérification. À utiliser uniquement avec des fournisseurs de confiance.`,requireEmailVerifiedAutoLink:`Désactiver le lien automatique d'abord pour modifier ce paramètre.`,defaultGroup:`Groupe par défaut`,defaultGroupDesc:`Groupe attribué aux utilisateurs créés automatiquement. Repli sur Viewers si non défini.`,defaultGroupViewersFallback:`Viewers (par défaut)`,autologin:`Connexion automatique`,autologinDesc:`Rediriger les visiteurs non authentifiés directement vers ce fournisseur. Un seul fournisseur peut porter cet indicateur.`}},encryption:{title:`Statut du chiffrement MFA`,enabledFromEnv:`Chiffrement au repos activé (clé depuis la variable d'environnement MFA_ENCRYPTION_KEY)`,enabledFromFile:`Chiffrement au repos activé (clé chargée depuis le répertoire de données)`,enabledGenerated:`Chiffrement au repos activé avec une clé auto-générée`,notConfigured:`Chiffrement au repos non configuré`,notConfiguredDesc:`Les secrets TOTP et client_secrets OIDC sont stockés en clair. Définissez MFA_ENCRYPTION_KEY ou redémarrez Bambuddy avec un répertoire de données accessible en écriture pour en générer un automatiquement.`,allEncrypted:`Tous les secrets MFA sont chiffrés au repos.`,legacyRowsLabel:`Lignes héritées en clair`,encryptedRowsLabel:`Lignes chiffrées`,legacyRowsWarning:`{{count}} ligne(s) héritée(s) en clair détectée(s). Réenregistrez le fournisseur OIDC ou réinscrivez l'application d'authentification de l'utilisateur pour migrer vers le stockage chiffré.`,backupHint:`La clé auto-générée est stockée dans DATA_DIR/.mfa_encryption_key et incluse dans les ZIP de sauvegarde locale. Conservez vos sauvegardes en sécurité ou définissez MFA_ENCRYPTION_KEY explicitement.`,decryptionBrokenTitle:`Clé de chiffrement manquante`,decryptionBrokenError:`{{count}} enregistrement(s) chiffré(s) ne peuvent pas être déchiffrés car la clé de chiffrement n'est plus disponible. Restaurez le MFA_ENCRYPTION_KEY précédent ou DATA_DIR/.mfa_encryption_key pour récupérer.`,migrationErrorWarning:`{{count}} ligne(s) ancienne(s) n'ont pas pu être rechiffrée(s) au démarrage. Vérifiez les journaux du serveur et redémarrez Bambuddy pour réessayer.`},spoolbuddy:{infoTitle:`Périphériques SpoolBuddy`,infoBody:`Les bornes SpoolBuddy s'enregistrent automatiquement via heartbeat. Désinscrivez ici un appareil qui n'est plus utilisé ou un doublon obsolète laissé par un crash du daemon.`,duplicatesTitle:`{{count}} appareils enregistrés`,duplicatesBody:`Seul le premier appareil enregistré est utilisé par l'interface du kiosk. Si l'un de ces appareils est un doublon obsolète issu d'un crash, désinscrivez-le — un appareil en ligne se ré-enregistrera automatiquement au prochain heartbeat.`,empty:`Aucun appareil SpoolBuddy enregistré pour le moment.`,online:`En ligne`,offline:`Hors ligne`,unregister:`Désinscrire`,unregisterSuccess:`Appareil désinscrit`,unregisterError:`Échec de la désinscription`,confirmTitle:`Désinscrire l'appareil SpoolBuddy ?`,confirmBody:`Cela retirera "{{hostname}}" ({{deviceId}}) de la base de données. Si l'appareil est en ligne, il se ré-enregistrera automatiquement au prochain heartbeat.`,ipAddress:`Adresse IP`,firmware:`Micrologiciel`,lastSeen:`Dernière activité`,daemonUptime:`Uptime du daemon`,systemUptime:`Uptime système`,never:`jamais`,nfc:`NFC`,scale:`Balance`,cpuTemp:`Temp. CPU`,cpuLoad:`Charge CPU`,memory:`Mémoire`,disk:`Disque`,update:`Mettre à jour`,updateConfirmTitle:`Mettre à jour le daemon Spoolbuddy ?`,updateConfirmBody:`Déclencher une mise à jour logicielle sur "{{hostname}}" ? Le daemon redémarrera une fois la mise à jour appliquée.`,restartBrowser:`Redémarrer le navigateur`,restartBrowserConfirmTitle:`Redémarrer le navigateur du kiosk ?`,restartBrowserConfirmBody:`Redémarrer le navigateur du kiosk sur "{{hostname}}" ? L'écran sera momentanément vide.`,restartDaemon:`Redémarrer le daemon`,restartDaemonConfirmTitle:`Redémarrer le daemon Spoolbuddy ?`,restartDaemonConfirmBody:`Redémarrer le daemon Spoolbuddy sur "{{hostname}}" ? L'appareil sera hors ligne quelques secondes.`,reboot:`Redémarrer`,rebootConfirmTitle:`Redémarrer l'appareil ?`,rebootConfirmBody:`Redémarrer "{{hostname}}" ? L'appareil sera hors ligne pendant environ une minute.`,shutdown:`Éteindre`,shutdownConfirmTitle:`Éteindre l'appareil ?`,shutdownConfirmBody:`Éteindre "{{hostname}}" ? Vous aurez besoin d'un accès physique pour le rallumer.`,commandConfirm:`Confirmer`,commandQueued:`Commande en file d'attente`,commandError:`Échec de l'envoi de la commande`},pipelineLimits:{title:`Limites des pipelines du trancheur`,maxCopiesLabel:`Copies maximales par exécution`,maxCopiesDesc:`Limite supérieure du nombre de copies que les opérateurs peuvent demander lors de l'exécution d'un pipeline. La limite stricte côté serveur est 1000.`},pipelines:{title:`Pipelines du Trancheur`,subtitle:`Lots de préréglages réutilisables (imprimante + processus + filaments + type de plateau). Enregistrez-en un depuis le dialogue Trancher et appliquez-le en un clic au fichier suivant.`,loading:`Chargement des pipelines…`,loadError:`Impossible de charger les pipelines.`,confirmDelete:`Supprimer ce pipeline ? Cela ne peut pas être annulé.`,staleWarning:`Un ou plusieurs préréglages référencés n'existent plus. Réenregistrez ce pipeline depuis le dialogue Trancher pour le corriger.`,empty:{title:`Aucun pipeline pour le moment.`,howto:`Ouvrez le dialogue Trancher pour n'importe quel fichier, choisissez imprimante / processus / filaments / plateau, puis cliquez sur « Enregistrer comme pipeline ». Vos pipelines enregistrés apparaîtront ici.`},field:{name:`Nom du pipeline`,description:`Description`,targetPrinter:`Imprimante cible`,noTarget:`— Aucune cible —`,targetKind:`Type de cible`,targetKindSpecific:`Imprimante spécifique`,targetKindClass:`Classe d'imprimante`,targetModelClass:`Modèle d'imprimante`,fanoutStrategy:`Stratégie de distribution`,fanout:{max_parallel:`Max parallèle — distribuer sur toute imprimante libre correspondante`,round_robin:`Round robin — alterner entre imprimantes éligibles`,fill_one_first:`Remplir une d'abord — épingler toutes les copies à une imprimante`},fanoutShort:{max_parallel:`parallèle`,round_robin:`round robin`,fill_one_first:`remplir une`}},action:{save:`Enregistrer`,cancel:`Annuler`,rename:`Renommer`,delete:`Supprimer`},slot:{printer:`Imprimante`,process:`Processus`,filament:`Filament`,filamentN:`Filament {{n}}`,filamentAll:`Tous les {{n}} emplacements`,bed:`Plateau`},group:{profiles:`Profils`,filaments:`Filaments`},searchPlaceholder:`Rechercher des pipelines…`,filterTargetType:`Filtrer par type de cible`,filterTarget:`Filtrer par cible`,filter:{all:`Toutes les cibles`,noTarget:`Aucune cible`,count:`{{shown}} / {{total}}`,noMatches:`Aucun pipeline ne correspond aux filtres actuels.`},toast:{saved:`Pipeline enregistré`,saveFailed:`Échec de l'enregistrement`,deleted:`Pipeline supprimé`,deleteFailed:`Échec de la suppression`},noTargetHint:`Définissez une imprimante cible pour exécuter`,noTargetWarning:`Définissez une imprimante cible avant d'exécuter ce pipeline.`,runs:{lastRun:`Dernière exécution`,status:{queued:`en file`,slicing:`tranchage`,dispatching:`envoi`,in_progress:`impression`,completed:`terminé`,failed:`échec`,partial_failure:`échec partiel`,cancelled:`annulé`}}}},notification:{printStarted:{title:`Impression démarrée`,body:`{{printer}} : {{filename}} commence l'impression`},printCompleted:{title:`Impression terminée`,body:`{{printer}} : {{filename}} a réussi`},printFailed:{title:`Impression échouée`,body:`{{printer}} : {{filename}} a échoué`},printStopped:{title:`Impression arrêtée`,body:`{{printer}} : {{filename}} a été arrêtée`},printProgress:{title:`Progression d'impression`,body:`{{printer}} : {{filename}} est à {{percent}}%`},printerOffline:{title:`Imprimante hors ligne`,body:`{{printer}} est déconnectée`},printerError:{title:`Erreur imprimante`,body:`{{printer}} : {{error}}`},filamentLow:{title:`Filament bas`,body:`{{printer}} : Le filament est presque vide`},maintenanceDue:{title:`Maintenance due`,body:`{{printer}} : {{items}} demandent votre attention`}},errors:{generic:`Une erreur est survenue`,networkError:`Erreur réseau. Vérifiez votre connexion.`,notFound:`Non trouvé`,unauthorized:`Non autorisé`,serverError:`Erreur serveur`,validationError:`Vérifiez vos saisies`,printerConnectionFailed:`Échec connexion imprimante`,saveFailed:`Échec enregistrement`,deleteFailed:`Échec suppression`,loadFailed:`Échec chargement`},hmsErrors:{title:`Erreurs - {{name}}`,noErrors:`Aucune erreur`,viewOnWiki:`Voir sur le Wiki Bambu Lab`,mqttVerifyFailedRemedy:`Activez le mode developpeur sur l'imprimante, redemarrez l'imprimante, puis relancez la tache.`,unknownCode:`Code HMS inconnu — consultez le wiki Bambu Lab pour plus de détails.`,clearInstructions:`Effacez les erreurs sur l'imprimante pour les retirer ici.`,clearErrors:`Effacer les erreurs`,clearSuccess:`Erreurs HMS effacées`,clearFailed:`Échec de l'effacement des erreurs HMS`,actionSuccess:`Action envoyée à l'imprimante`,actionFailed:`Échec de l'envoi de l'action`,runoutExpectedSlot:`Le filament est épuisé dans {{ranOut}}. L'imprimante attend maintenant du filament compatible dans {{expected}}. Insérez une bobine dans {{expected}}, puis sélectionnez Réessayer.`,runoutExpectedSlotOnly:`L'imprimante attend du filament compatible dans {{expected}}. Insérez-y une bobine, puis sélectionnez Réessayer.`,runoutSlotUnknown:`Le filament est épuisé et l'impression est en pause. Bambuddy n'a pas pu déterminer quel emplacement l'imprimante attend désormais — vérifiez l'écran de l'imprimante pour l'emplacement demandé.`,actions:{RESUME_PRINTING:`Reprendre l'impression`,RESUME_PRINTING_DEFECTS:`Reprendre (défauts acceptables)`,RESUME_PRINTING_PROBELM_SOLVED:`Reprendre (problème résolu)`,STOP_PRINTING:`Arrêter l'impression`,CHECK_ASSISTANT:`Ouvrir l'assistant`,FILAMENT_EXTRUDED:`Filament extrudé, continuer`,RETRY_FILAMENT_EXTRUDED:`Pas encore extrudé, réessayer`,CONTINUE:`Terminé, continuer`,LOAD_VIRTUAL_TRAY:`Charger le filament`,OK_BUTTON:`OK`,FILAMENT_LOAD_RESUME:`Filament chargé, reprendre`,JUMP_TO_LIVEVIEW:`Voir en direct`,NO_REMINDER_NEXT_TIME:`Ne plus rappeler la prochaine fois`,REFRESH_NOZZLE:`Revérifier`,IGNORE_NO_REMINDER_NEXT_TIME:`Ignorer et ne plus rappeler`,IGNORE_RESUME:`Ignorer et reprendre`,PROBLEM_SOLVED_RESUME:`Problème résolu, reprendre`,TURN_OFF_FIRE_ALARM:`Compris, désactiver l'alarme incendie`,RETRY_PROBLEM_SOLVED:`Réessayer (problème résolu)`,CANCLE:`Annuler`,STOP_DRYING:`Arrêter le séchage`,PROCEED:`Continuer`,OK_JUMP_RACK:`OK`,ABORT:`Annuler`,DISABLE_PURIFICATION:`Désactiver la purification pour cette impression`,DONT_REMIND_NEXT_TIME:`Ne plus me rappeler`,DBL_CHECK_CANCEL:`Annuler`,DBL_CHECK_DONE:`Terminé`,DBL_CHECK_RETRY:`Réessayer`,DBL_CHECK_RESUME:`Reprendre`,DBL_CHECK_OK:`Confirmer`,REMOVE_CLOSE_BTN:`Fermer`}},mqttDebug:{title:`Journal de débogage MQTT`,searchPlaceholder:`Chercher topic ou message...`,noMessages:`Aucun message enregistré`,startLoggingHint:`Cliquez sur "Démarrer" pour capturer les messages MQTT`,noMessagesMatch:`Aucun message ne correspond`,adjustFilterHint:`Ajustez votre recherche`,incoming:`Entrant`,outgoing:`Sortant`,loggingStopped:`Enregistrement arrêté`,loggingActive:`Enregistrement actif - rafraîchissement auto`,startLogging:`Démarrer`,stopLogging:`Arrêter`,clearLog:`Effacer le journal`,topic:`Sujet`,timestamp:`Horodatage`,direction:`Direction`,all:`Tous`},printerFiles:{zipStarted_one:`Téléchargement ZIP de {{count}} fichier démarré`,zipStarted_other:`Téléchargement ZIP de {{count}} fichiers démarré`,zipPartial:`Le téléchargement ZIP a démarré avec {{successful}} fichiers sur {{total}} ; les autres n’ont pas pu être récupérés`,downloadFailed:`Échec du téléchargement : {{error}}`,unknownError:`Erreur inconnue`,shiftSelectHint:`Maj-clic pour sélectionner une plage`,selectFile:`Sélectionner {{name}}`,deselectFile:`Désélectionner {{name}}`,title:`Gestionnaire de fichiers`,storageUsed:`Utilisé :`,storageFree:`Libre :`,filterPlaceholder:`Filtrer les fichiers...`,deleteButton:`Supprimer`,deleteFiles:`Supprimer {{count}} fichiers`,deleteFileConfirm:`Supprimer "{{name}}" ?`,deleteFilesConfirm:`Supprimer les {{count}} fichiers sélectionnés ?`,noFiles:`Aucun fichier sur l'imprimante`,printerUnavailable:`Le service de fichiers de l'imprimante est indisponible. Réessayez lorsque l'imprimante est accessible.`,loadingFiles:`Chargement...`,failedToLoad:`Échec chargement fichiers`,toast:{filesDeleted:`{{count}} fichier(s) supprimé(s)`,deleteFailed:`Échec suppression : {{error}}`}},confirm:{delete:`Voulez-vous vraiment supprimer cet élément ?`,unsavedChanges:`Changements non sauvegardés. Voulez-vous quitter ?`,clearQueue:`Voulez-vous vraiment vider la file d'attente ?`},login:{title:`Connexion Bambuddy`,subtitle:`Connectez-vous à votre compte`,username:`Utilisateur`,usernamePlaceholder:`Entrez votre utilisateur`,usernameOrEmail:`Utilisateur ou Email`,usernameOrEmailPlaceholder:`Utilisateur ou @ Email`,password:`Mot de passe`,passwordPlaceholder:`Entrez votre mot de passe`,signIn:`Se connecter`,signingIn:`Connexion...`,rememberMe:`Se souvenir de moi`,forgotPassword:`Mot de passe oublié ?`,autologinFailed:`La connexion SSO automatique a échoué. Choisissez un fournisseur ci-dessous pour continuer.`,localDisabledNotice:`La connexion locale est désactivée. Utilisez l'un des fournisseurs SSO ci-dessous.`,loginSuccess:`Connecté avec succès`,loginFailed:`Échec de connexion`,enterCredentials:`Entrez vos identifiants`,enterEmail:`Veuillez entrer votre adresse e-mail`,oidcLoginFailed:`Échec de la connexion OIDC`,oidcErrors:{providerError:`Le fournisseur d'identité a renvoyé une erreur`,missingParameters:`Il manque des paramètres requis dans le callback OIDC`,invalidState:`L'état OIDC est invalide ou a déjà été utilisé`,stateExpired:`La session OIDC a expiré — veuillez réessayer`,providerNotFound:`Fournisseur OIDC introuvable`,discoveryFailed:`Impossible de récupérer le document de découverte OIDC`,invalidDiscovery:`Le document de découverte OIDC est invalide`,networkError:`Erreur réseau lors de l'échange de jeton OIDC`,badResponse:`Réponse inattendue lors de l'échange de jeton OIDC`,noIdToken:`Le fournisseur OIDC n'a pas renvoyé de jeton d'identité`,validationFailed:`La validation du jeton OIDC a échoué`,nonceMismatch:`Le nonce OIDC ne correspond pas — possible attaque par rejeu`,missingSubClaim:`Le jeton OIDC est dépourvu de la revendication sub`,noLinkedAccount:`Aucun compte local est lié à cette identité OIDC`,accountInactive:`Votre compte est inactif`,userResolutionFailed:`Impossible de résoudre votre compte`,internalError:`Une erreur interne est survenue lors de la connexion OIDC`,tokenExchangeFailed:`L'échange de jeton OIDC a échoué`},forgotPasswordTitle:`Mot de passe oublié`,forgotPasswordMessage:`Contactez votre administrateur pour réinitialiser votre accès.`,forgotPasswordEmailMessage:`Entrez votre email pour recevoir un nouveau mot de passe.`,emailAddress:`Adresse Email`,emailPlaceholder:`votre.email@exemple.com`,cancel:`Annuler`,sending:`Envoi...`,sendResetEmail:`Envoyer l'email`,howToReset:`Comment réinitialiser :`,resetStep1:`Contactez votre admin Bambuddy`,resetStep2:`Demandez une réinitialisation dans la Gestion Utilisateurs`,resetStep3:`Il vous donnera un mot de passe temporaire`,resetStep4:`Connectez-vous et changez-le dans les Paramètres`,gotIt:`Compris`,twoFA:{title:`Authentification à deux facteurs`,subtitle:`Votre compte est protégé par la 2FA. Saisissez le code de vérification ci-dessous.`,methodAuthenticator:`Application d'authentification`,methodEmail:`Code par e-mail`,methodBackup:`Code de récupération`,instructionsTotp:`Ouvrez votre application d'authentification et saisissez le code à 6 chiffres pour Bambuddy.`,instructionsEmail:`Un code à 6 chiffres a été envoyé à votre adresse e-mail. Il est valable 10 minutes.`,instructionsEmailNotSent:`Cliquez ci-dessous pour recevoir un code de vérification par e-mail.`,instructionsBackup:`Saisissez l'un de vos codes de récupération à 8 caractères. Chaque code ne peut être utilisé qu'une seule fois.`,sendCodeButton:`Envoyer le code par e-mail`,sendingCode:`Envoi en cours...`,resendCode:`Renvoyer le code`,codeLabel:`Code de vérification`,backupCodeLabel:`Code de récupération`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Vérifier`,verifyingButton:`Vérification en cours...`,backToLogin:`← Retour à la connexion`,orContinueWith:`ou continuer avec`,signInWith:`Se connecter avec {{provider}}`,enterCode:`Veuillez entrer le code de vérification`,sendCodeFailed:`Échec de l'envoi du code de vérification`,invalidCode:`Code invalide. Veuillez réessayer.`},resetPassword:{title:`Définir un nouveau mot de passe`,subtitle:`Saisissez et confirmez votre nouveau mot de passe ci-dessous.`,newPassword:`Nouveau mot de passe`,newPasswordPlaceholder:`Au moins 8 caractères`,confirmPassword:`Confirmer le mot de passe`,confirmPasswordPlaceholder:`Répéter le nouveau mot de passe`,saving:`Enregistrement…`,submit:`Définir le mot de passe`,backToLogin:`Retour à la connexion`,passwordsDoNotMatch:`Les mots de passe ne correspondent pas`,passwordTooShort:`Le mot de passe doit contenir au moins 8 caractères`,resetFailed:`Échec de la réinitialisation. Le lien a peut-être expiré.`}},setup:{title:`Configuration Bambuddy`,subtitle:`Configurez l'authentification`,enableAuth:`Activer l'authentification`,adminAccount:`Compte Admin`,adminAccountDesc:`Si des admins existent, ils seront utilisés. Sinon, créez-en un ci-dessous.`,adminUsername:`Utilisateur Admin`,adminPassword:`Mot de passe Admin`,optionalIfAdminExists:`(optionnel si admin existe)`,adminUsernamePlaceholder:`Nom admin (optionnel)`,adminPasswordPlaceholder:`Mdp admin (optionnel)`,confirmPassword:`Confirmer mdp`,confirmPasswordPlaceholder:`Confirmez mdp admin`,settingUp:`Configuration...`,completeSetup:`Terminer la configuration`,toast:{authEnabledAdminCreated:`Authentification activée et admin créé`,authEnabledExistingAdmins:`Authentification activée avec admins existants`,setupCompleted:`Configuration terminée`,enterBothCredentials:`Entrez les deux ou laissez vide pour utiliser les admins existants`,passwordsDoNotMatch:`Les mots de passe ne correspondent pas`,passwordTooShort:`Minimum 6 caractères`}},changePassword:{title:`Changer le mot de passe`,currentPassword:`Mot de passe actuel`,currentPasswordPlaceholder:`Entrez mdp actuel`,newPassword:`Nouveau mot de passe`,newPasswordPlaceholder:`Nouveau mdp (min 6 char)`,confirmPassword:`Confirmer nouveau mdp`,confirmPasswordPlaceholder:`Confirmez nouveau mdp`,passwordsDoNotMatch:`Les mots de passe ne correspondent pas`,passwordTooShort:`Minimum 6 caractères`,changing:`Changement...`,success:`Mot de passe modifié`,failed:`Échec modification`},plateAlert:{title:`Impression en Pause !`,message:`Objets détectés sur le plateau. L'impression a été suspendue automatiquement. Videz le plateau avant de reprendre.`,understand:`J'ai compris`},camera:{title:`Vue Caméra`,invalidPrinterId:`ID imprimante invalide`,live:`Direct`,snapshot:`Instantané`,restartStream:`Redémarrer le flux`,refreshSnapshot:`Rafraîchir l'image`,fullscreen:`Plein écran`,exitFullscreen:`Quitter plein écran`,connectingToCamera:`Connexion caméra...`,capturingSnapshot:`Capture...`,connectionLost:`Connexion perdue`,connectionFailed:`Échec connexion caméra`,reconnecting:`Reconnexion dans {{countdown}}s... (essai {{attempt}}/{{max}})`,reconnectNow:`Reconnexion immédiate`,cameraUnavailable:`Caméra indisponible`,cameraUnavailableDesc:`Vérifiez que l'imprimante est allumée.`,noCamera:`Aucune caméra disponible`,retry:`Réessayer`,cameraStream:`Flux caméra`,zoomOut:`Zoom arrière`,zoomIn:`Zoom avant`,resetZoom:`Réinitialiser zoom`,recording:`Enregistrement`,startRecording:`Démarrer l'enregistrement`,stopRecording:`Arrêter l'enregistrement`,chamberLight:`Basculer lumière chambre`,unavailable:`Caméra indisponible`,diagnose:{button:`Diagnostic`,modalTitle:`Diagnostic de la caméra`,running:`Diagnostic en cours...`,runFailed:`Impossible d'exécuter le diagnostic : {{error}}`,retry:`Relancer`,stage:{tcp_reachable:`Accessibilité réseau`,first_frame:`Capture d'image`,live_stream_active:`Flux en direct actif`},summary:{all_ok:`La caméra fonctionne. Toutes les étapes du diagnostic ont réussi.`,live_stream_active_healthy:`La caméra diffuse actuellement avec des images récentes — aucun test nécessaire.`,printer_unreachable:`L'imprimante n'est pas joignable. Vérifiez l'adresse IP, la connexion réseau et que l'imprimante est allumée.`,camera_port_closed:`L'imprimante répond mais le port de la caméra est fermé. Assurez-vous que le mode LAN et le mode développeur sont activés dans les paramètres de l'imprimante.`,no_frame:`Connexion à la caméra établie mais aucune image reçue. Réessayez ou vérifiez que la caméra est activée dans les paramètres de l'imprimante.`,unknown_failure:`Le diagnostic de la caméra a échoué pour une raison inconnue. Consultez le journal de support pour plus de détails.`},meta:{protocol:`Protocole`,port:`Port`,profile:`Profil`}}},groups:{title:`Gestion des Groupes`,subtitle:`Gérez les permissions pour le contrôle d'accès`,backToSettings:`Retour aux paramètres`,createGroup:`Créer un groupe`,noPermission:`Accès refusé.`,system:`Système`,noDescription:`Pas de description`,usersCount:`{{count}} utilisateurs`,permissionsCount:`{{count}} permissions`,edit:`Modifier`,delete:`Supprimer`,toast:{created:`Groupe créé`,updated:`Groupe mis à jour`,deleted:`Groupe supprimé`,enterGroupName:`Entrez un nom de groupe`},modal:{editGroup:`Modifier le groupe`,createGroup:`Créer un groupe`,cancel:`Annuler`,saving:`Enregistrement...`,creating:`Création...`,saveChanges:`Enregistrer`},form:{groupName:`Nom du groupe`,groupNamePlaceholder:`Nom du groupe`,systemGroupWarning:`Les groupes système sont fixes`,description:`Description`,descriptionPlaceholder:`Description (optionnel)`,permissions:`Permissions ({{count}} sélectionnées)`},deleteModal:{title:`Supprimer le groupe`,message:`Les utilisateurs de ce groupe perdront ces permissions.`,confirm:`Supprimer`},editor:{title:`Modifier le groupe`,createTitle:`Créer un groupe`,search:`Rechercher des permissions...`,selectAll:`Tout sélectionner`,clearAll:`Tout désélectionner`,permissionsSelected:`{{count}} sélectionnée(s)`,noResults:`Aucune permission ne correspond à votre recherche`,websocketHint:`Requis pour les mises à jour en direct. Sans cette permission, l'interface bascule sur une actualisation périodique.`}},users:{title:`Gestion des Utilisateurs`,subtitle:`Gérez les accès à Bambuddy`,backToSettings:`Retour aux paramètres`,createUser:`Créer un utilisateur`,noPermission:`Accès refusé.`,admin:`Administrateur`,noGroups:`Aucun groupe`,active:`Actif`,inactive:`Inactif`,edit:`Modifier`,delete:`Supprimer`,system:`Système`,noGroupsAvailable:`Aucun groupe disponible`,table:{username:`Utilisateur`,groups:`Groupes`,status:`Statut`,actions:`Actions`},toast:{created:`Utilisateur créé`,updated:`Utilisateur mis à jour`,deleted:`Utilisateur supprimé`,fillRequired:`Remplissez les champs requis`,passwordsDoNotMatch:`Les mots de passe ne correspondent pas`,passwordTooShort:`Minimum 6 caractères`,ldapProvisioned:`Utilisateur LDAP "{{username}}" provisionné`},modal:{createUser:`Créer utilisateur`,editUser:`Modifier utilisateur`,cancel:`Annuler`,creating:`Création...`,saving:`Enregistrement...`,saveChanges:`Enregistrer`,advancedAuthSubtitle:`avec Authentification Avancée`,tabsAriaLabel:`Source utilisateur`,localTab:`Local`,ldapTab:`LDAP`,ldapSearchLabel:`Rechercher dans l'annuaire`,ldapSearchPlaceholder:`Tapez un nom d'utilisateur, un nom ou un e-mail...`,ldapMinChars:`Tapez au moins 2 caractères pour rechercher`,ldapTypeToSearch:`Commencez à taper pour rechercher dans l'annuaire LDAP`,ldapSearching:`Recherche dans l'annuaire...`,ldapNoResults:`Aucun utilisateur correspondant dans l'annuaire`,ldapSearchError:`Échec de la recherche dans l'annuaire. Vérifiez l'état du serveur LDAP.`,ldapAlreadyProvisioned:`Déjà provisionné`,ldapSelectedLabel:`Sélectionné`,ldapProvision:`Provisionner l'utilisateur`,ldapProvisioning:`Provisionnement...`,ldapErrorProvision:`Échec du provisionnement. Vérifiez l'état du serveur LDAP et réessayez.`},form:{username:`Utilisateur`,usernamePlaceholder:`Nom utilisateur`,email:`E-mail`,emailPlaceholder:`utilisateur@exemple.com`,password:`Mot de passe`,passwordPlaceholder:`Mot de passe`,confirmPassword:`Confirmer mdp`,confirmPasswordPlaceholder:`Confirmez mdp`,newPasswordPlaceholder:`Nouveau mdp`,confirmNewPasswordPlaceholder:`Confirmez nouveau mdp`,leaveBlankToKeep:`Laissez vide pour conserver l'actuel`,groups:`Groupes`,optional:`optionnel`,autoGeneratedPassword:`Un mot de passe sera généré et envoyé par email.`,passwordManagedByAdvancedAuth:`Géré par Auth Avancée. Utilisez "Réinitialiser" pour envoyer un nouveau mdp par email.`,resetPassword:`Réinitialiser le mot de passe`,resettingPassword:`Réinitialisation...`},deleteModal:{title:`Supprimer utilisateur`,message:`Cette action est irréversible.`,confirm:`Supprimer`}},streamOverlay:{title:`Superposition Flux`,invalidPrinterId:`ID invalide`,cameraStream:`Flux caméra`,progress:`Progression`,eta:`Fin estimée`,printerIdle:`Imprimante inactive`,printerOffline:`Imprimante hors ligne`,builder:{title:`Incrustation de diffusion`,description:`Compose l'URL d'une incrustation de diffusion — une vue caméra plein écran avec les données d'impression en direct par-dessus, pour OBS, un écran mural ou toute source navigateur. Choisissez les champs voulus et copiez l'URL.`,printer:`Imprimante`,size:`Taille du texte`,sizeSmall:`Petite`,sizeMedium:`Moyenne`,sizeLarge:`Grande`,fps:`Fréquence d'images`,fpsHint:`Les caméras A1 et P1 plafonnent autour de 5 images par seconde, quelle que soit la valeur demandée.`,token:`Jeton d'incrustation (facultatif)`,tokenHint:`Nécessaire uniquement si la connexion est activée : OBS n'a pas de session. Créez-en un ci-dessus avec la portée Incrustation de diffusion.`,tokenWarning:`Cette URL contient un jeton — quiconque peut la lire peut voir le flux et le nom du fichier. Révoquez le jeton pour couper l'accès.`,fields:`Champs à afficher`,fieldPrinter:`Nom de l'imprimante`,fieldFilename:`Nom du fichier`,fieldStatus:`Statut`,fieldProgress:`Barre de progression`,fieldLayers:`Nombre de couches`,fieldEta:`Temps restant et heure de fin`,fieldCamera:`Flux caméra`,chamberHint:`La température du caisson n'apparaît que sur les modèles dotés d'un vrai capteur — les P1 et A1 renvoient une valeur sans signification, elle est donc omise.`,urlTitle:`URL de l'incrustation`,open:`Ouvrir`,showPreview:`Afficher l'aperçu`,hidePreview:`Masquer l'aperçu`,previewTitle:`Aperçu de l'incrustation`},status:{printing:`Impression`,paused:`En pause`,finished:`Terminée`,failed:`Échouée`,idle:`Inactive`,unknown:`Inconnue`}},profiles:{title:`Profils`,subtitle:`Gérez vos presets slicer et calibrations Pressure Advance`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Profils Locaux`,kprofiles:`Profils K`},orcaCloud:{connectedAs:`Connecté en tant que`,connectedShort:`Connecté à Orca Cloud`,logout:`Déconnecter`,noLogoutPermission:`Vous n'avez pas la permission de vous déconnecter`,noConnectPermission:`Vous n'avez pas la permission de vous connecter à Orca Cloud`,retry:`Réessayer`,connectButton:`Connecter Orca Cloud`,connect:{title:`Se connecter à Orca Cloud`,description:`Connectez-vous à votre compte Orca Cloud pour synchroniser vos profils de slicer dans Bambuddy.`},device:{title:`Approuver Bambuddy dans Orca Cloud`,instruction:`Ouvrez Orca Cloud et approuvez ce code. Bambuddy se connecte automatiquement dès que vous l'approuvez.`,codeLabel:`Votre code d'appairage`,openButton:`Ouvrir la page d'approbation d'Orca Cloud`,manualHint:`Ou rendez-vous sur {{url}} et saisissez le code ci-dessus.`,waiting:`En attente de votre approbation…`,cancel:`Annuler`},profiles:{title:`Vos profils Orca Cloud ({{count}})`,refresh:`Actualiser`,empty:`Aucun profil trouvé dans votre compte Orca Cloud pour le moment.`},toast:{disconnected:`Déconnecté d'Orca Cloud`},errors:{startFailed:`Impossible de démarrer la connexion à Orca Cloud.`,denied:`L'appairage a été refusé dans Orca Cloud.`,expired:`Le code d'appairage a expiré. Cliquez sur Connecter pour réessayer.`,pollFailed:`La connexion a été perdue pendant l'attente de l'approbation. Veuillez réessayer.`}},localProfiles:{title:`Profils Locaux`,subtitle:`Gérez vos presets OrcaSlicer`,import:`Importer Profils`,importDesc:`Déposez les fichiers .bbscfg, .bbsflmt, .orca_filament, .zip ou .json`,importing:`Importation...`,search:`Chercher un preset...`,noPresets:`Aucun preset local`,noSearchResults:`Aucun preset ne correspond à votre recherche`,badge:`Local`,edit:`Modifier`,delete:`Supprimer`,cancel:`Annuler`,deleteConfirmTitle:`Supprimer Preset`,deleteConfirm:`Supprimer définitivement ce preset ?`,source:`Source`,inheritsFrom:`Hérite de`,filamentType:`Type`,vendor:`Vendeur`,compatiblePrinters:`Imprimantes`,nozzleTemp:`Temp Buse`,cost:`Coût`,density:`Densité`,pressureAdvance:`Pressure Advance`,filament:`Filament`,process:`Processus`,printer:`Imprimante`,toast:{importSuccess:`{{count}} profil(s) importé(s)`,importSkipped:`{{count}} profil(s) ignoré(s) (doublons)`,importError:`{{count}} erreur(s) d'import`,deleted:`Preset supprimé`,updated:`Preset mis à jour`}},connectedAs:`Connecté en tant que`,signInExpiredTitle:`Session Bambu Cloud expirée`,signInExpiredBody:`Bambu Lab n'accepte plus le jeton enregistré. Reconnectez-vous pour rétablir les profils cloud, les imports MakerWorld et la vérification des firmwares.`,logout:`Déconnexion`,noLogoutPermission:`Pas d'autorisation de déconnexion`,failedToLoad:`Échec chargement profils`,retry:`Réessayer`,time:{justNow:`À l'instant`,minsAgo:`Il y a {{count}}m`,hoursAgo:`Il y a {{count}}h`,daysAgo:`Il y a {{count}}j`},toast:{loggedOut:`Déconnecté`},login:{title:`Connexion Bambu Cloud`,subtitle:`Synchronisez vos presets slicer`,email:`E-mail`,password:`Mot de passe`,region:`Région`,regionGlobal:`Global`,regionChina:`Chine`,verificationCode:`Code de vérification`,totpCode:`Code Authenticator`,checkEmail:`Code envoyé à {{email}}`,enterTotpHint:`Entrez le code 2FA`,accessToken:`Jeton d'accès (Access Token)`,accessTokenHint:`Collez votre jeton Bambu Cloud. Les comptes de la région Chine doivent passer par ici (liés à un numéro de téléphone — pas de connexion par e-mail). Le wiki explique comment récupérer le jeton depuis les cookies MakerWorld.`,back:`Retour`,loginButton:`Connexion`,verifyButton:`Vérifier`,setTokenButton:`Définir Jeton`,useToken:`Utiliser jeton d'accès`,captchaTitle:`Bambu Cloud demande un CAPTCHA`,captchaBody:`Bambu impose un CAPTCHA à votre réseau avant d'accepter une connexion, et ce défi ne peut pas être résolu depuis Bambuddy. Votre e-mail et votre mot de passe ne sont pas en cause. Le blocage est lié à votre adresse IP publique et disparaît généralement de lui-même en quelques heures ; réessayer sans cesse le prolonge. Pour vous connecter maintenant, utilisez plutôt un jeton d'accès issu d'une session de navigateur.`,useEmail:`Connexion par email`,toast:{loggedIn:`Connecté avec succès`,codeSent:`Code envoyé par email`,enterTotp:`Entrez le code Authenticator`,tokenSet:`Jeton défini`}},presets:{myPreset:`Mon preset (modifiable)`,duplicate:`Dupliquer`,editable:`Modifiable`,failedToLoadDetails:`Échec détails preset`,deleteConfirm:`Supprimer ce preset ?`,deleteWarning:`Ceci supprimera "{{name}}" de Bambu Cloud définitivement.`,noDuplicatePermission:`Pas d'autorisation duplication`,noEditPermission:`Pas d'autorisation modification`,noDeletePermission:`Pas d'autorisation suppression`,types:{filament:`Preset filament`,printer:`Preset imprimante`,process:`Preset processus`},toast:{deleted:`Preset supprimé`,created:`Preset créé`,updated:`Preset mis à jour`,duplicated:`Preset dupliqué`,fieldAdded:`Champ "{{key}}" ajouté`,exported:`Preset exporté`},baseLabel:`Base : {{name}}`,currentLabel:`Actuel : {{name}}`,newPreset:`Nouveau Preset`,editPreset:`Modifier Preset`,duplicatePreset:`Dupliquer Preset`,createNewPreset:`Créer un nouveau Preset`,customizeSettings:`Personnalisez vos réglages`,compareWithBase:`Comparer avec la base`,compare:`Comparer`,basePreset:`Preset de base`,selectBasePreset:`Choisir preset de base...`,presetName:`Nom du preset`,myCustomPreset:`Mon preset personnalisé`,inheritsFrom:`Hérite de`,dropJsonToImport:`Glissez JSON pour importer`,tabs:{common:`Commun`,allFields:`Tous les champs`},availableFields:`Champs disponibles`,searchFieldsPlaceholder:`Chercher un champ...`,noMatchingFields:`Aucun champ trouvé`,allFieldsAdded:`Tous les champs sont ajoutés`,addCustomField:`Ajouter un champ personnalisé`,yourOverrides:`Vos modifications`,noOverridesYet:`Aucune modification`,clickFieldsToAdd:`Cliquez à gauche pour ajouter`,saveAsTemplate:`Enregistrer comme modèle`,jsonTip:`Conseil : Glissez un .json pour importer les réglages`},cloudView:{searchPlaceholder:`Chercher presets...`,templates:`Modèles`,refresh:`Rafraîchir`,newPreset:`Nouveau Preset`,clearFilters:`Effacer filtres`,compareMode:`Mode Comparaison`,selectAnotherPreset:`Choisir un autre preset {{type}}`,clickTwoPresets:`Choisissez deux presets de même type`,selectFirst:`1. Sélectionner premier`,selectSecond:`2. Sélectionner second`,compareNow:`Comparer maintenant`,lastSynced:`Synchronisé :`,showingCount:`{{showing}} sur {{total}} presets`,noPresetsFound:`Aucun preset trouvé`,columns:{filament:`Filament`,process:`Processus`,printer:`Imprimante`},noFilamentPresets:`Pas de preset filament`,noProcessPresets:`Pas de preset processus`,noPrinterPresets:`Pas de preset imprimante`,filters:{type:`Type`,owner:`Propriétaire`,printer:`Imprimante`,nozzle:`Buse`,filament:`Filament`,layer:`Couche`,all:`Tous`,myPresets:`Mes Presets`,builtIn:`Inclus`,process:`Processus`},noTemplatesPermission:`Pas d'autorisation modèles`,noRefreshPermission:`Pas d'autorisation rafraîchissement`,noCreatePermission:`Pas d'autorisation création`},templates:{title:`Modèles rapides`,noTemplates:`Aucun modèle`,createFirst:`Créez-en depuis l'éditeur de preset`,typeFilter:`Type :`,deleteTitle:`Supprimer modèle`,deleteWarning:`Action irréversible`,deleteConfirm:`Supprimer "{{name}}" ?`,namePlaceholder:`Nom du modèle`,descriptionPlaceholder:`Description`,settingsJson:`Paramètres (JSON)`,fieldsCount:`{{count}} champs`,shownInModals:`Visible dans fenêtres`,hiddenInModals:`Masqué dans fenêtres`,apply:`Appliquer`,toast:{deleted:`Modèle supprimé`,updated:`Modèle mis à jour`,created:`Modèle créé`,applied:`Modèle appliqué`}}},support:{debugLoggingActive:`Débogage actif`,manageLogs:`Gérer`,collectItem7:`Connectivité et versions firmware`,collectItem8:`Statut intégrations (Spoolman, MQTT, HA)`,collectItem9:`Interfaces réseau (sous-réseaux)`,collectItem10:`Versions packages Python`,collectItem11:`Santé base de données`,collectItem12:`Détails environnement Docker`,bundleGenerating:`Génération du paquet...`,bundleStepConnection:`Vérification de la connectivité des imprimantes`,bundleStepVirtualPrinters:`Vérification de la configuration des imprimantes virtuelles`,bundleStepLogScan:`Analyse des journaux récents pour les problèmes connus`,bundleStepBuild:`Création du ZIP du paquet de support`},fileManager:{variants:{badge:`Versions : {{count}}`,groupAction:`Grouper comme versions`,groupTooltip:`Marquer ces fichiers comme le même travail tranché pour différentes imprimantes`,grouped:`{{count}} fichiers groupés comme versions`,printAlternatives:`Imprimer ({{count}} alternatives)`},title:`Gestionnaire de fichiers`,subtitle:`Organisez vos fichiers d'impression`,uploadFiles:`Téléverser fichiers`,newFolder:`Nouveau dossier`,folderName:`Nom du dossier`,folderNamePlaceholder:`ex: Pièces Utiles`,renameFile:`Renommer fichier`,renameFolder:`Renommer dossier`,invalidFilenameChar:`Le caractère "{{char}}" n'est pas autorisé dans les noms de fichier d'impression. La carte SD de l'imprimante refuse : < > : " / \\ | ? *`,moveFiles:`Déplacer {{count}} fichier(s)`,rootNoFolder:`Racine (aucun dossier)`,current:`actuel`,linkFolder:`Lier le dossier`,linkFolderDescription:`Lier "{{name}}" à un projet ou archive.`,project:`Projet`,archive:`Archive`,noProjectsFound:`Aucun projet trouvé`,noArchivesFound:`Aucune archive trouvée`,unlink:`Délier`,link:`Lier`,dragDropFiles:`Glissez les fichiers ici`,dropFilesHere:`Déposez ici`,releaseToUpload:`Relâcher pour téléverser`,orClickToBrowse:`ou cliquez pour parcourir`,allFileTypesSupported:`Tous types supportés. ZIP extraits.`,zipFilesDetected:`ZIP détectés`,zipExtractOptions:`Choix de structure pour ZIP :`,preserveZipStructure:`Garder structure ZIP`,createFolderFromZip:`Dossier par nom du ZIP`,stlThumbnailGeneration:`Vignettes STL`,zipMayContainStl:`Extraction vignettes possible pour STL.`,thumbnailsCanBeGenerated:`Génération vignettes (peut être long).`,generateThumbnailsForStl:`Générer vignettes STL`,threemfDetected:`Fichiers 3MF détectés`,threemfExtractionInfo:`Réglages extraits auto du 3MF.`,willBeExtracted:`Sera extrait`,filesExtracted:`{{count}} fichiers extraits`,uploadComplete:`Terminé : {{succeeded}} succès`,uploadFailed:`Échec du téléversement`,zipFilesFailed:`{{count}} fichiers échoués`,uploading:`Téléversement...`,changeLink:`Modifier lien...`,linkTo:`Lier à...`,linkToProjectOrArchive:`Lier à projet ou archive`,generateThumbnail:`Générer vignette`,generateThumbnails:`Générer vignettes`,generateThumbnailsForMissing:`Vignettes STL manquantes`,gridView:`Grille`,listView:`Liste`,lowDiskSpaceWarning:`Espace disque faible`,lowDiskSpaceDetails:`{{free}} libre sur {{total}}. Seuil : {{threshold}} Go.`,files:`Fichiers`,folders:`Dossiers`,size:`Taille`,free:`Libre`,allFiles:`Tous les fichiers`,allExternal:`Externes`,externalIsEmpty:`Aucun fichier externe`,externalEmptyDescription:`Les fichiers de vos dossiers externes liés apparaîtront ici.`,wrap:`Retour ligne`,enableTextWrapping:`Activer retour ligne`,disableTextWrapping:`Désactiver retour ligne`,collapse:`Réduire`,collapseFoldersByDefault:`Réduire les dossiers par défaut`,expandFoldersByDefault:`Développer les dossiers par défaut`,folderSort:`Trier les dossiers`,folderSortByName:`Par nom`,folderSortByActivity:`Par activité récente`,dragToResizeTooltip:`Glisser pour redimensionner, double-clic reset`,searchFiles:`Chercher fichiers...`,searchSubfoldersHint:`Sous-dossiers inclus`,readme:{truncated:`Tronqué`,show:`Afficher le README`,hide:`Masquer le README`,label:`README`},tags:{title:`Étiquettes`,subtitle:`Étiquetez les fichiers pour des filtres transversaux — jouets, adapté aux enfants, PETG uniquement, etc.`,manage:`Étiquettes`,manageTitle:`Gérer le catalogue d'étiquettes`,add:`Nouvelle étiquette`,edit:`Renommer l'étiquette`,name:`Nom`,fileCount:`Fichiers`,empty:`Aucune étiquette pour le moment. Créez-en une pour commencer.`,noMatches:`Aucune étiquette correspondante.`,createPlaceholder:`ex. jouets, kid-safe, petg`,createButton:`Créer`,nameRequired:`Le nom est requis.`,searchPlaceholder:`Filtrer les étiquettes...`,created:`Étiquette créée.`,updated:`Étiquette renommée.`,deleted:`Étiquette supprimée.`,saveFailed:`Impossible d'enregistrer l'étiquette.`,deleteFailed:`Impossible de supprimer l'étiquette.`,applyFailed:`Impossible d'appliquer les étiquettes.`,applyAdd:`Ajouter des étiquettes`,applyRemove:`Retirer des étiquettes`,applyAddSuccess:`{{count}} étiquette(s) ajoutée(s) sur {{files}} fichier(s).`,applyRemoveSuccess:`{{count}} étiquette(s) retirée(s) sur {{files}} fichier(s).`,actionAdd:`Ajouter aux fichiers sélectionnés`,actionRemove:`Retirer des fichiers sélectionnés`,tagAction:`Étiqueter`,bulkTitle:`Étiqueter {{count}} fichier(s) sélectionné(s)`,bulkTooltip:`Ajouter ou retirer des étiquettes sur chaque fichier sélectionné.`,noPermission:`Vous n'avez pas la permission d'étiqueter les fichiers.`,filterLabel:`Filtré par :`,clearAll:`Tout effacer`,confirmDelete:`Supprimer l'étiquette « {{name}} » ?`,confirmDeleteMessage:`Cela supprime l'étiquette du catalogue. Les fichiers conservent leurs autres étiquettes.`,confirmDeleteInUseMessage:`Cette étiquette est sur {{count}} fichier(s). La suppression la retire de tous ; les fichiers eux-mêmes ne sont pas touchés.`,editAria:`Modifier {{name}}`,deleteAria:`Supprimer {{name}}`},allTypes:`Tous types`,prints:`Impressions`,ascending:`Croissant`,descending:`Décroissant`,showModified:`Afficher les dates de modification`,hideModified:`Masquer les dates de modification`,lastModified:`Dernière modification`,lastActivity:`Dernière activité`,resultsCount:`{{showing}} sur {{total}} fichiers`,selectAll:`Tout sélectionner`,deselectAll:`Tout désélectionner`,selected:`{{count}} sélectionnés`,adding:`Ajout...`,loadingFiles:`Chargement...`,folderIsEmpty:`Dossier vide`,noFilesYet:`Aucun fichier`,folderEmptyDescription:`Téléversez ou déplacez des fichiers ici.`,noFilesDescription:`Téléversez des fichiers pour organiser.`,noMatchingFiles:`Aucun fichier correspondant`,noMatchingFilesDescription:`Ajustez votre recherche.`,clearFilters:`Effacer filtres`,printedCount:`Imprimé {{count}}x`,uploadedBy:`Téléversé par`,deleteFolder:`Supprimer dossier`,deleteFile:`Supprimer fichier`,deleteFilesCount:`Supprimer {{count}} fichiers`,deleteFolderConfirm:`Supprimer le dossier et son contenu ?`,deleteFileConfirm:`Supprimer ce fichier ?`,deleteFilesConfirm:`Supprimer {{count}} fichiers définitivement ?`,deleting:`Suppression...`,noPermissionRenameFolder:`Pas d'autorisation renommage`,noPermissionLinkFolder:`Pas d'autorisation lien`,noPermissionDeleteFolder:`Pas d'autorisation suppression dossier`,onlyEmptyFoldersDeletable:`Vous ne pouvez supprimer que les dossiers vides`,noPermissionPrint:`Pas d'autorisation impression`,noPermissionSlice:`Vous n'avez pas la permission de découper des fichiers`,noPermissionAddToQueue:`Pas d'autorisation file`,noPermissionDownload:`Pas d'autorisation téléchargement`,noPermissionPreview:`Vous n'avez pas la permission de prévisualiser les fichiers`,preview3d:`Aperçu 3D`,noPermissionRenameFile:`Pas d'autorisation renommage fichier`,noPermissionGenerateThumbnail:`Pas d'autorisation vignettes`,noPermissionDeleteFile:`Pas d'autorisation suppression fichier`,noPermissionCreateFolder:`Pas d'autorisation nouveau dossier`,noPermissionUpload:`Pas d'autorisation téléversement`,noPermissionMoveFiles:`Pas d'autorisation déplacement`,noPermissionDeleteFiles:`Pas d'autorisation suppression groupée`,linkExternal:`Lier externe`,linkExternalFolder:`Lier un dossier externe`,linkExternalFolderDescription:`Monter un répertoire hôte (NAS, USB, partage réseau) dans le gestionnaire de fichiers. Les fichiers ne sont pas copiés — ils sont lus directement depuis le chemin d'origine.`,externalFolderNamePlaceholder:`ex. Impressions NAS`,externalPath:`Chemin hôte`,externalPathHelp:`Chemin absolu du répertoire sur l'hôte Docker. Doit être monté en bind dans le conteneur.`,readOnly:`Lecture seule`,readOnlyHelp:`empêche les téléversements et suppressions`,showHiddenFiles:`Afficher les fichiers cachés (fichiers point)`,externalFolder:`Dossier externe`,scanFolder:`Scanner`,toast:{folderCreated:`Dossier créé`,openInSlicerFailed:`Impossible d'ouvrir dans le slicer`,folderDeleted:`Dossier supprimé`,fileDeleted:`Fichier supprimé`,filesDeleted:`{{count}} fichiers supprimés`,filesMoved:`Fichiers déplacés`,folderLinked:`Dossier lié`,folderUnlinked:`Dossier délié`,externalFolderLinked:`Dossier externe lié et scanné`,folderScanned:`Scan terminé : {{added}} ajoutés, {{removed}} supprimés`,addedToQueue:`{{count}} fichier(s) ajouté(s)`,addedToQueuePartial:`{{added}} ajoutés, {{failed}} échecs`,failedToAddToQueue:`Échec ajout file : {{error}}`,fileRenamed:`Fichier renommé`,folderRenamed:`Dossier renommé`,thumbnailsGenerated:`{{count}} vignette(s) générée(s)`,thumbnailsGeneratedPartial:`{{succeeded}} succès, {{failed}} échecs`,noStlMissingThumbnails:`Aucun STL sans vignette`,failedToGenerateThumbnails:`Échec vignettes : {{error}}`,thumbnailGenerated:`Vignette générée`,failedToGenerateThumbnail:`Échec vignette : {{error}}`}},projects:{parentLabel:`Projet parent`,parentNone:`Aucun (projet de premier niveau)`,parentHint:`Imbriquer ce projet dans un autre pour que ses chiffres remontent vers un projet principal`,partOf:`Fait partie de {{name}}`,subProjectCount:`{{count}} sous-projets`,subProjectsOf:`Sous-projets de {{name}}`,collapseSubProjects:`Réduire les sous-projets`,expandSubProjects:`Développer les sous-projets`,title:`Projets`,subtitle:`Suivez vos projets d'impression 3D`,newProject:`Nouveau Projet`,editProject:`Modifier Projet`,deleteProject:`Supprimer Projet`,projectName:`Nom du Projet`,description:`Description`,noProjects:`Aucun projet`,noProjectsFiltered:`Aucun projet {{status}}`,noProjectsFilteredHelp:`Vous n'avez aucun projet "{{status}}". Les projets apparaîtront ici lorsque leur statut changera.`,createFirst:`Créez votre premier projet pour organiser vos builds.`,createFirstButton:`Créer votre premier projet`,create:`Créer`,files:`Fichiers`,prints:`Impressions`,plates:`plateaux`,parts:`pièces`,lastModified:`Modifié le`,deleteConfirm:`Supprimer ce projet ? Les archives seront déliées mais conservées.`,addFiles:`Ajouter fichiers`,removeFile:`Retirer fichier`,viewDetails:`Détails`,namePlaceholder:`ex: Build Voron 2.4`,descriptionPlaceholder:`Description optionnelle...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`L'URL doit commencer par http:// ou https://`,openExternalUrl:`Ouvrir l’URL du projet`,coverImageLabel:`Photo de couverture`,coverImageAlt:`Photo de couverture du projet`,coverImageUpload:`Téléverser`,coverImageReplace:`Remplacer`,coverImageRemove:`Supprimer`,color:`Couleur`,targetPlates:`Plateaux cibles`,targetPlatesPlaceholder:`ex: 25`,targetPlatesHelp:`Nombre total de jobs`,targetParts:`Pièces cibles`,targetPartsPlaceholder:`ex: 150`,targetPartsHelp:`Nombre total d'objets`,targetSets:`Copies par fichier`,targetSetsPlaceholder:`ex. 10`,targetSetsHelp:`Nombre d'impressions de chaque fichier imprimable`,tagsLabel:`Tags (séparés par virgules)`,tagsPlaceholder:`ex: voron, cadeau`,dueDate:`Échéance`,priority:`Priorité`,priorityLow:`Basse`,priorityNormal:`Normale`,priorityHigh:`Haute`,priorityUrgent:`Urgente`,statusActive:`Actif`,statusCompleted:`Terminé`,statusArchived:`Archivé`,done:`Fait`,completed:`terminé`,failed:`échoué`,inQueue:`en file`,noPrintsYet:`Aucune impression`,printJobs:`Jobs (plateaux)`,partsPrinted:`Pièces imprimées`,failedParts:`Pièces échouées`,import:`Importer`,export:`Exporter`,importProject:`Importer projet`,exportAll:`Exporter tous les projets`,loading:`Chargement des projets...`,noEditPermission:`Pas d'autorisation de modification`,noDeletePermission:`Pas d'autorisation de suppression`,noCreatePermission:`Pas d'autorisation de création`,noImportPermission:`Pas d'autorisation d'import`,noExportPermission:`Pas d'autorisation d'export`,toast:{created:`Projet créé`,updated:`Projet mis à jour`,deleted:`Projet supprimé`,imported:`Projet importé`,multipleImported:`{{count}} projets importés`,importFailed:`Échec d'import`,exported:`Projets exportés (métadonnées)`}},projectDetail:{notFound:`Projet non trouvé`,backToProjects:`Retour aux Projets`,export:`Exporter`,exportProject:`Exporter projet`,noExportPermission:`Pas d'autorisation export`,noEditPermission:`Pas d'autorisation modification`,partOf:`Fait partie de :`,priorityLabel:`Priorité :`,noPrints:`Aucune impression dans ce projet`,status:{active:`Actif`,completed:`Terminé`,archived:`Archivé`},priority:{low:`Basse`,normal:`Normale`,high:`Haute`,urgent:`Urgente`},dueDate:{overdue:`En retard`,today:`Aujourd'hui`,daysLeft:`{{count}} jours restants`},progress:{platesProgress:`Progression Plateaux`,partsProgress:`Progression Pièces`,setsProgress:`Jeux complets`,sets:`jeux`,setsHint:`Un jeu est complet quand chaque fichier imprimable atteint ce nombre`,printJobs:`jobs d'impression`,parts:`pièces`,percentComplete:`{{percent}}% terminé`,remaining:`{{count}} restant(s)`},stats:{printJobs:`Jobs d'Impression`,total:`total`,failed:`{{count}} échecs`,partsPrinted:`{{count}} pièces imprimées`,printTime:`Temps d'Impression`,filamentUsed:`Filament utilisé`},cost:{title:`Suivi des coûts`,filamentCost:`Coût Filament`,energy:`Énergie`,totalCost:`Coût Total`,total:`Total`,includesBom:`BOM incluse`,budget:`Budget`,remaining:`Restant`},subProjects:{title:`Sous-projets ({{count}})`,jobs:`{{count}} travaux`},rollup:{title:`Y compris {{count}} sous-projets`,progress:`Progression globale`,percentComplete:`{{percent}}% terminé`},notes:{title:`Notes`,noEditPermission:`Pas d'autorisation modification`,placeholder:`Ajouter des notes...`,empty:`Aucune note. Cliquez sur modifier.`},files:{title:`Fichiers`,linkFolders:`Liez des dossiers depuis le gestionnaire`,forQuickAccess:`pour un accès rapide.`,fileCount:`{{count}} fichier(s)`,empty:`Aucun dossier lié.`,printedCount:`Imprimé {{count}} fois`,progressTooltip:`{{done}} sur {{target}} impressions terminées`,noFiles:`Aucun fichier dans ce dossier.`},bom:{title:`BOM (Liste matériel)`,acquired:`{{completed}}/{{total}} acquis`,showAll:`Tout afficher`,hideDone:`Masquer acquis`,addPart:`Ajouter matériel`,noAddPermission:`Pas d'autorisation ajout`,partNamePlaceholder:`Nom (ex: Vis M3x8)`,partName:`Nom de pièce`,qty:`Qté`,price:`Prix ({{currency}})`,sourcingUrlPlaceholder:`Lien d'achat (optionnel)`,remarksPlaceholder:`Remarques (optionnel)`,deletePart:`Supprimer pièce`,deleteConfirm:`Supprimer "{{name}}" ?`,noUpdatePermission:`Pas d'autorisation mise à jour`,noEditPermission:`Pas d'autorisation modification`,noDeletePermission:`Pas d'autorisation suppression`,totalCost:`Coût total :`,empty:`BOM vide. Ajoutez du matériel ou de l'électronique.`},timeline:{title:`Historique d'activité`,empty:`Aucune activité.`},template:{saveAsTemplate:`Enregistrer comme modèle`,noCreatePermission:`Pas d'autorisation modèle`},queue:{title:`File d'attente`,viewAll:`Tout voir`,printing:`{{count}} en cours`,queued:`{{count}} en file`},prints:{title:`Impressions ({{count}})`},toast:{projectUpdated:`Projet mis à jour`,partAdded:`Pièce ajoutée`,partRemoved:`Pièce retirée`,exportFailed:`Échec export`,projectExported:`Projet exporté`,templateCreated:`Modèle créé`}},system:{title:`Informations Système`,version:`Version`,uptime:`Temps de fonctionnement`,cpuUsage:`Utilisation CPU`,memoryUsage:`Utilisation RAM`,diskUsage:`Utilisation Disque`,networkInfo:`Infos Réseau`,logs:`Journaux`,debugMode:`Mode Débogage`,enableDebug:`Activer débogage`,disableDebug:`Désactiver débogage`,downloadLogs:`Télécharger logs`,clearLogs:`Effacer logs`,dockerInfo:`Infos Docker`,containerName:`Nom conteneur`,imageName:`Nom image`,platform:`Plateforme`,architecture:`Architecture`},sponsors:{sectionTitle:`Indépendant & financé par la communauté`,tagline:`Bambuddy est gratuit et le reste parce que des personnes choisissent de le soutenir. Pas de VC, pas de verrouillage cloud.`,viewSupporters:`Voir les soutiens`,toastPrints:`Tu as terminé {{count}} impressions avec Bambuddy. Bambuddy reste gratuit grâce à ceux qui le soutiennent.`,toastCost:`Tu as suivi {{total}} de filament avec Bambuddy. Vois qui garde le projet indépendant.`,toastArchives:`{{count}} impressions archivées avec Bambuddy. Vois qui le garde indépendant.`,toastAnniversary:`Un an avec Bambuddy ! Vois qui garde le projet indépendant.`,toastVersionUpdate:`Mis à jour vers v{{version}}. Bambuddy reste gratuit grâce à ceux qui le soutiennent.`,toastBusiness:`Vous utilisez Bambuddy sur {{count}} imprimantes ? Il existe une offre de support pour les équipes : corrections prioritaires, facturation et contact direct avec le mainteneur.`,businessCta:`Bambuddy pour les entreprises`,businessTitle:`Bambuddy pour les entreprises`,businessTagline:`Vous gérez {{count}} imprimantes. Support prioritaire, licences commerciales et facturation sont disponibles pour les équipes et les fermes d'impression.`},library:{title:`Bibliothèque Filament`,addFilament:`Ajouter Filament`,editFilament:`Modifier Filament`,deleteFilament:`Supprimer Filament`,vendor:`Vendeur`,material:`Matériau`,color:`Couleur`,kFactor:`Facteur K`,temperature:`Température`,noFilaments:`Bibliothèque vide`,deleteConfirm:`Supprimer ce filament ?`,importFromPrinter:`Importer de l'imprimante`,exportToFile:`Exporter vers fichier`,runWithPipeline:{actionLabel:`Exécuter avec un pipeline`,noPermission:`Vous n'avez pas la permission d'exécuter des pipelines`,modalTitle:`Exécuter avec un pipeline`,confirmTitle:`Confirmer l'exécution`,confirmIntro:`Le pré-vol a trouvé des problèmes avec cette exécution`,sourceHint:`Source`,pipelineHint:`Pipeline`,targetHint:`Cible`,pipelineListAria:`Pipelines disponibles`,runAnyway:`Exécuter quand même`,loading:`Chargement…`,empty:`Aucun pipeline enregistré pour le moment. Ouvrez le dialogue Trancher et cliquez sur « Enregistrer comme pipeline » pour en créer un.`,noTarget:`Aucune imprimante cible définie`,noTargetMessage:`Ce pipeline n'a pas d'imprimante cible. Ouvrez-le dans les Paramètres pour en choisir une.`,copies:`Copies`,copiesHint:`max {{n}}`,classTarget:`N'importe quel {{model}}`,toast:{started:`Exécution de pipeline démarrée`,failed:`Impossible de démarrer l'exécution`},issue:{printerNotSet:`Aucune imprimante cible définie pour ce pipeline.`,printerNotFound:`L'imprimante cible n'existe plus.`,printerDisabled:`L'imprimante cible est désactivée.`,printerOffline:`L'imprimante cible est hors ligne.`,filamentType:`Emplacement filament {{slot}} : attendu {{expected}}, AMS a {{actual}}`,filamentColor:`Emplacement filament {{slot}} : couleur différente (attendu {{expected}}, AMS a {{actual}})`,amsSlotMissing:`Emplacement AMS {{slot}} indisponible sur cette imprimante`,filamentUnverified:`L'emplacement filament {{slot}} provient d'un préréglage cloud / standard et n'a pas pu être vérifié statiquement.`,noClassMatches:`Aucune imprimante de cette installation ne correspond à la classe de modèle cible du pipeline ({{expected}}).`,classNotSet:`La cible du pipeline est une classe d'imprimante mais aucun modèle n'a été choisi.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Valeurs par défaut du trancheur affichées : votre sidecar est plus ancien que cette fonctionnalité et ne peut pas fournir les valeurs d'un profil. Mettez à jour l'image du sidecar pour les voir. Tout ce que vous ne modifiez pas utilise toujours le profil.`,presetValuesNotConfigured:`Valeurs par défaut du trancheur affichées : aucun sidecar n'est configuré, les valeurs d'un profil ne peuvent donc pas être lues. Tout ce que vous ne modifiez pas utilise toujours le profil.`,presetValuesSidecarUnavailable:`Valeurs par défaut du trancheur affichées : le sidecar n'a pas répondu, les valeurs d'un profil ne peuvent donc pas être lues. Tout ce que vous ne modifiez pas utilise toujours le profil.`,presetValuesUnavailable:`Valeurs par défaut du trancheur affichées : celles du profil choisi n'ont pas pu être lues. Tout ce que vous ne modifiez pas utilise toujours le profil.`,filamentDefault:`Par défaut`,fromFile:`du fichier`,fromFileHint:`Le concepteur a modifié ce paramètre dans le fichier source. Sa valeur est {{value}}.`,fromFilePrinterCoupled:`imprimante du concepteur`,fromFilePrinterCoupledHint:`Réglé pour l'imprimante pour laquelle ce fichier a été conçu — peut être incorrect ou hors plage sur la vôtre.`,fromFileOverridesPreset:`remplace le profil`,fromFileOverridesPresetHint:`Le fichier impose {{value}} alors que le profil choisi utilise {{preset}}. À cocher uniquement si le fichier doit primer.`,useFromFile:`Utiliser la valeur du fichier source pour {{option}}`,otherFromFile:`Autres paramètres de ce fichier`,fromFileSummary:`Le concepteur a modifié {{count}} réglages de process dans ce fichier. Seuls ceux que vous cochez sont utilisés.`,fromFileUseAll:`Utiliser les réglages du concepteur`,fromFileUseAllHint:`Coche les réglages transposables d'une imprimante à l'autre. Ceux calés sur l'imprimante du concepteur, et ceux qui définissent le profil choisi, restent décochés.`,fromFileClear:`Effacer {{count}}`,loading:`Chargement des paramètres du trancheur…`,mode:{simple:`Simple`,advanced:`Avancé`,expert:`Expert`},searchPlaceholder:`Rechercher un paramètre`,resetAll:`Réinitialiser {{count}}`,resetOption:`Réinitialiser à la valeur par défaut`,noMatches:`Aucun paramètre ne correspond à cette recherche.`},slice:{filamentSlotUnset:`non défini`,processSettingsEmbedded:`Inutilisé tant que « Utiliser les paramètres intégrés du fichier » est activé : ce sont les paramètres du fichier qui pilotent ce découpage.`,processSettingsInactive:`Inactif`,presetsHidden:`{{count}} masqués`,showAllPresets:`Tout afficher`,showFewerPresets:`Afficher moins`,processSettings:`Paramètres de process`,processSettingsHint:`Ajustez le profil choisi pour ce découpage. Tout ce que vous ne modifiez pas reste tel que défini par le profil.`,processSettingsChanged:`{{count}} modifiés`,processSettingsUnchanged:`Valeurs du profil`,title:`Slicer le modèle`,action:`Slicer`,actionAll:`Slicer les {{count}} plateaux`,actionAllTitle:`Slicer tous les plateaux dans une sortie multi-plateaux (une seule archive). La sélection de filament couvre chaque emplacement défini par le projet.`,allPlatesToggle:`Slicer les {{count}} plateaux`,slicing:`Découpage…`,printer:`Profil d'imprimante`,process:`Profil de processus`,filament:`Profil de filament`,filamentSlot:`Filament {{index}} – {{type}}`,filamentColour:`Couleur du filament`,selectPreset:`— Sélectionner un préréglage —`,loadingPresets:`Chargement des préréglages…`,analyzingPlateFilaments:`Analyse des filaments de la plaque…`,analyzingPlateFilamentsHint:`Exécution d'un découpage d'aperçu pour identifier les emplacements AMS utilisés. Mis en cache après — la réouverture est instantanée.`,previewToast:`Analyse de {{name}} – {{elapsed}}`,previewWithProgress:`Analyse de {{name}} – {{stage}} ({{percent}} %) – {{elapsed}}`,notUsedByPlate:`— non utilisé par cette plaque`,noPresetsForSlot:`Aucun préréglage disponible`,otherPrinters:`Autres imprimantes`,presetsLoadFailed:`Échec du chargement des préréglages. Ouvrez Paramètres → Profils pour les importer d'abord.`,refreshPresets:`Actualiser`,refreshPresetsTitle:`Actualiser les préréglages — récupérer les dernières listes Cloud et bundle (à utiliser après avoir supprimé un préréglage dans Bambu Studio ou Bambu Handy)`,allPresetsRequired:`Tous les préréglages doivent être sélectionnés`,useEmbedded:`Utiliser les réglages intégrés du fichier`,useEmbeddedHint:`Slicer tel que le concepteur l'a configuré (parois, remplissage, filament) au lieu des profils ci-dessus. Proposé car votre imprimante correspond à celle du fichier.`,autoOrient:`Orienter les objets automatiquement`,autoOrientHint:`Le trancheur fait pivoter chaque objet sur sa meilleure face d'impression avant de trancher. Remplace l'orientation enregistrée dans le fichier.`,autoArrange:`Disposer automatiquement sur le plateau`,autoArrangeHint:`Le trancheur place les objets pour qu'ils ne se chevauchent plus. Remplace la disposition du fichier.`,enqueuing:`Envoi du travail de découpage…`,queued:`En file d'attente…`,failed:`Échec du découpage. Vérifiez les journaux du sidecar.`,startedToast:`Découpage de {{name}} en arrière-plan…`,queuedToast:`En attente : {{name}} – {{elapsed}}`,runningToast:`Découpage {{name}} – {{elapsed}}`,runningWithProgress:`{{name}} – {{stage}} ({{percent}} %) – {{elapsed}}`,runningWithProgressMultiPlate:`Plateau {{plateIndex}} sur {{plateCount}} • {{name}} – {{stage}} ({{percent}} %) – {{elapsed}}`,completedToast:`{{name}} découpé`,externalWriteFallbackToast:`Enregistré dans la bibliothèque interne : impossible d'écrire dans le dossier externe`,failedTitle:`Échec du découpage`,failedToast:`Échec du découpage de {{name}} : {{detail}}`,tier:{local:`Importé`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Standard`},cloud:{notAuthenticated:`Connectez-vous à Bambu Cloud (Paramètres → Profils → Bambu Cloud) pour voir vos préréglages cloud.`,expired:`Session Bambu Cloud expirée – reconnectez-vous pour actualiser vos préréglages cloud.`,unreachable:`Bambu Cloud est inaccessible. Les préréglages locaux et standards fonctionnent encore.`},orcaCloud:{notAuthenticated:`Connectez-vous à Orca Cloud (Profils → Orca Cloud) pour voir vos préréglages Orca.`,expired:`Session Orca Cloud expirée — reconnectez-vous pour actualiser vos préréglages Orca.`,unreachable:`Orca Cloud est indisponible pour le moment. Les autres préréglages fonctionnent toujours.`},bedType:{label:`Plateau d'impression`,auto:`Auto (utiliser le préréglage de processus)`,coolPlate:`Cool Plate`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`},pipelines:{label:`Pipeline`,applyAria:`Appliquer le pipeline`,applyPrompt:`Appliquer un pipeline…`,empty:`Aucun pipeline enregistré`,saveButton:`Enregistrer comme pipeline`,saveTitle:`Enregistrer la sélection actuelle des quatre emplacements comme pipeline réutilisable`,namePlaceholder:`Nom du pipeline`,nameAria:`Nouveau nom de pipeline`,toast:{applied:`« {{name}} » appliqué`,saved:`Pipeline enregistré`,saveFailed:`Échec de l'enregistrement`}}},spoolman:{title:`Intégration Spoolman`,enabled:`Spoolman Activé`,url:`URL Spoolman`,connected:`Connecté`,disconnected:`Non Connecté`,testConnection:`Tester connexion`,sync:`Synchroniser`,syncing:`Sync...`,lastSync:`Dernière Sync`,linkToSpoolman:`Lier à Spoolman`,openInSpoolman:`Ouvrir Spoolman`,unlinkSpool:`Délier bobine`,unlinkConfirmTitle:`Désassigner la bobine ?`,unlinkConfirmMessage:`Cela retirera la bobine de cet emplacement. Les données de la bobine elles-mêmes resteront inchangées.`,selectSpool:`Choisir bobine`,noUnlinkedSpools:`Pas de bobine libre`,linkSuccess:`Bobine assignée avec succès`,linkFailed:`Échec de l’assignation`,unlinkSuccess:`Bobine désassignée avec succès`,unlinkFailed:`Échec du désassignement`,linkedSpool:`Bobine assignée`,spoolId:`ID Bobine`,fillSourceLabel:`(Spoolman)`,weight:`Poids`,remaining:`Restant`,disableWeightSync:`Désactiver Sync poids estimé AMS`,disableWeightSyncDesc:`Ne pas utiliser les estimations AMS. Utile si vous préférez le suivi Spoolman.`,reportPartialUsage:`Rapporter consommation partielle pour échecs`,reportPartialUsageDesc:`Si l'impression échoue, rapporte le filament consommé selon les couches.`},locations:{title:`Emplacements de stockage`,subtitle:`Gérez étagères, tiroirs et autres emplacements physiques pour vos bobines`,add:`Ajouter un emplacement`,addShort:`Ajouter`,edit:`Modifier l'emplacement`,name:`Nom`,spools:`Bobines`,sensors:`Capteurs`,empty:`Aucun emplacement de stockage. Créez votre première étagère ou tiroir.`,manage:`Emplacements`,createPlaceholder:`ex. Étagère A, Tiroir 1`,nameRequired:`Le nom de l'emplacement est requis`,created:`Emplacement créé`,updated:`Emplacement mis à jour`,deleted:`Emplacement supprimé`,saveFailed:`Échec de l'enregistrement de l'emplacement`,deleteFailed:`Échec de la suppression de l'emplacement`,deleteBlocked:`Retirez d'abord toutes les bobines de cet emplacement`,confirmDelete:`Supprimer « {{name}} » ?`,confirmDeleteMessage:`Cet emplacement sera retiré du catalogue. Déplacez d'abord les bobines.`,confirmDeleteMessageWithSensors:`Cet emplacement sera retiré du catalogue. Déplacez d'abord les bobines. Les capteurs connectés seront également supprimés.`},inventory:{title:`Inventaire de Bobines`,subtitle:`Gérez vos bobines`,addToInventory:`Ajouter à l'inventaire`,addToInventoryPending:`Ajout...`,addToInventorySuccess:`Bobine ajoutée à l'inventaire`,addToInventoryFailed:`Échec de l'ajout de la bobine à l'inventaire`,unknownSpoolTitle:`Nouveau filament détecté`,unknownSpoolMessage:`Une bobine avec un tag RFID inconnu a été détectée à {{location}}. L'ajouter à votre inventaire maintenant ?`,unknownSpoolSlot:`Emplacement`,bulk:{selectAllVisible:`Tout sélectionner (visible)`,selectRow:`Sélectionner la ligne`,selectGroup:`Sélectionner le groupe`,selectionCount:`{{count}} sélectionnée(s)`,edit:`Modifier`,printLabels:`Imprimer les étiquettes`,resetUsage:`Réinitialiser l'utilisation`,restore:`Restaurer`,archive:`Archiver`,delete:`Supprimer`,clearSelection:`Effacer la sélection`,editTitle:`Modification groupée des bobines`,editSubtitle:`S'applique à {{count}} bobines sélectionnées. Seuls les champs cochés seront mis à jour.`,editHint:`Tapez dans un champ pour le marquer comme à mettre à jour — seules les lignes cochées sont envoyées. Un champ laissé vide laisse les bobines inchangées (vider un champ se fait par bobine).`,useCustom:`Utiliser « {{value}} »`,toggleField:`Activer la mise à jour de ce champ`,changeCount:`{{count}} champ(s) seront mis à jour.`,applyPending:`Application...`,applyButton:`Appliquer à {{count}} bobines`,deleteTitle:`Supprimer les bobines sélectionnées`,archiveTitle:`Archiver les bobines sélectionnées`,restoreTitle:`Restaurer les bobines sélectionnées`,resetUsageTitle:`Réinitialiser l'utilisation des bobines sélectionnées`,deleteMessage:`Supprimer définitivement {{count}} bobines ? Cette action est irréversible.`,archiveMessage:`Archiver {{count}} bobines ? Elles pourront être restaurées plus tard.`,restoreMessage:`Restaurer {{count}} bobines archivées ?`,resetUsageMessage:`Réinitialiser le compteur « Total consommé » sur {{count}} bobines ? Le poids restant est préservé.`,updateSuccess:`{{count}} bobines mises à jour`,updateFailed:`Mise à jour groupée échouée`,updatePartial:`{{ok}} bobines mises à jour, {{failed}} échouées`,updateAllFailed:`Les {{count}} mises à jour ont échoué — la sélection est conservée pour réessayer`,deleteSuccess:`{{count}} bobines supprimées`,deleteFailed:`Suppression groupée échouée`,deletePartial:`{{ok}} bobines supprimées, {{failed}} échouées`,deleteAllFailed:`Les {{count}} suppressions ont échoué — la sélection est conservée pour réessayer`,archiveSuccess:`{{count}} bobines archivées`,archiveFailed:`Archivage groupé échoué`,archivePartial:`{{ok}} bobines archivées, {{failed}} échouées`,archiveAllFailed:`Les {{count}} archivages ont échoué — la sélection est conservée pour réessayer`,restoreSuccess:`{{count}} bobines restaurées`,restoreFailed:`Restauration groupée échouée`,restorePartial:`{{ok}} bobines restaurées, {{failed}} échouées`,restoreAllFailed:`Les {{count}} restaurations ont échoué — la sélection est conservée pour réessayer`,invalidHex:`Saisissez 6 caractères hex (RRVVBB) ou 8 (RRVVBBAA). Sinon le champ ne sera pas appliqué.`},spoolmanMixedContentTitle:`Spoolman ne peut pas se charger en HTTPS — contenu mixte bloqué par votre navigateur`,spoolmanMixedContentBody:`Bambuddy est servi en HTTPS (via votre reverse proxy), mais votre URL Spoolman est encore en HTTP. Les navigateurs bloquent le contenu mixte pour des raisons de sécurité, donc l'interface Spoolman intégrée ne peut pas s'afficher. Spoolman doit être accessible en HTTPS.`,spoolmanMixedContentFixReverseProxy:`Placez Spoolman derrière le même reverse proxy que Bambuddy (Traefik / Nginx / Caddy) en HTTPS, puis mettez à jour l'URL Spoolman dans les Paramètres avec la nouvelle adresse HTTPS.`,spoolmanMixedContentFixOpenNewTab:`Alternative : ouvrez Spoolman dans un nouvel onglet en HTTP — les règles de contenu mixte ne s'appliquent qu'aux cadres intégrés, un onglet autonome fonctionne.`,spoolmanOpenInNewTab:`Ouvrir Spoolman dans un nouvel onglet`,labels:{title:`Imprimer étiquettes de bobines`,selectedCount:`{{count}} sélectionné`,pickSpools:`Choisissez les bobines pour lesquelles imprimer des étiquettes :`,monochrome:`Monochrome (imprimante noir et blanc)`,monochromeHint:`Supprime la pastille de couleur et élargit le texte`,startingPosition:`Position de départ de l’étiquette`,startingPositionRange:`Modèles en feuille uniquement : L7160 accepte 1–21 ; 5160 accepte 1–30.`,startingPositionInvalid:`Saisissez un nombre entier de 1 à {{capacity}}.`,startingPositionFirst:`L’impression commence à la position 1.`,startingPositionSkipped:`Les positions 1 à {{lastPosition}} resteront vides sur la première feuille.`,startingPositionRangeError:`La position de départ doit être comprise entre 1 et {{capacity}} pour cette feuille.`,searchPlaceholder:`Rechercher par nom, marque ou #ID`,filterByMaterial:`Matériau :`,allMaterials:`Tout`,selectVisible:`Sélectionner tout visible ({{count}})`,deselectVisible:`Désélectionner visible`,clearAll:`Tout effacer`,noSpoolsToShow:`Aucune bobine à afficher. Ajustez votre filtre et réessayez.`,noMatches:`Aucune bobine ne correspond à la recherche ou au filtre actuel.`,printOne:`Imprimer l'étiquette de cette bobine`,printLabels:`Imprimer les étiquettes…`,bulkTitle:`Choisissez les bobines à étiqueter parmi les {{count}} affichées`,noSpoolsTitle:`Aucune bobine à étiqueter`,error:`Impossible de générer les étiquettes : {{msg}}`,sortBy:{label:`Trier :`,id:`Par ID`,color:`Par couleur`},templates:{amsHolderSmall:{label:`Support AMS — petit (74 × 33 mm)`,hint:`Une étiquette par page ; correspond à l'étiquette imprimable du modèle MakerWorld 752566 (Support d'étiquettes pour filament AMS).`},amsHolderLarge:{label:`Support AMS — grand (75 × 55 mm)`,hint:`Une étiquette par page ; s'adapte à la variante carton du support d'étiquettes pour filament AMS. Assez d'espace pour pastille, marque, matériau, ID et QR code.`},box40x30:{label:`Étiquette boîte (40 × 30 mm)`,hint:`Une étiquette par page ; taille de rouleau DK/Brother courante, idéale pour étiqueter sachets de filament et bacs de stockage.`},box:{label:`Box label (62 × 29 mm)`,hint:`Une étiquette par page ; dimensionnée pour Brother PT/QL et petites étiquettes Dymo.`},averyL7160:{label:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,hint:`Format de feuille UE ; 21 étiquettes par page A4.`},avery5160:{label:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,hint:`Format de feuille US ; 30 étiquettes par page Letter.`}}},csv:{importButton:`Importer CSV`,exportButton:`Exporter CSV`,modalTitle:`Importer des bobines depuis un CSV`,selectFile:`Choisissez un fichier CSV ou glissez-le ici`,dragHint:`En-tête : material (requis), brand, subtype, color_name, rgba, …`,parsing:`Lecture du fichier…`,previewError:`Impossible de lire le fichier CSV`,validCount:`{{count}} valides`,errorCount:`{{count}} en erreur`,skippedCount:`{{count}} ignorées`,colRow:`Ligne`,colStatus:`Statut`,colColor:`Couleur`,colorResolved:`Couleur remplie depuis le catalogue`,colorCrossMaterial:`Couleur reprise d'un autre matériau — aucune correspondance exacte dans le catalogue`,duplicateExisting:`Une bobine avec ce matériau, cette marque et cette couleur existe déjà — elle sera tout de même importée comme une nouvelle bobine`,spoolmanHint:`En mode Spoolman, utilisez l'import/export CSV intégré de Spoolman.`,importValidRows:`Importer {{count}} lignes valides`,noValidRows:`Aucune ligne valide`,importing:`Importation…`,importSuccess:`{{count}} bobines importées`,importError:`Échec de l'importation`,exportError:`Échec de l'exportation`},addSpool:`Ajouter Bobine`,editSpool:`Modifier Bobine`,copySpool:`Copier Bobine`,material:`Matériau`,selectMaterial:`Choisir matériau...`,subtype:`Sous-type`,brand:`Marque`,searchBrand:`Chercher marque...`,useCustomBrand:`Utiliser "{{brand}}"`,useCustomMaterial:`Utiliser un matériau personnalisé : {{material}}`,suggestedOptions:`Suggérés`,allOptions:`Tous`,colorName:`Nom de couleur`,colorNamePlaceholder:`Blanc Jade, Rouge Feu...`,color:`Couleur`,hexColor:`Code Hex`,pickColor:`Choisir couleur perso`,labelWeight:`Poids net`,coreWeight:`Poids bobine vide`,searchSpoolWeight:`Chercher poids bobine...`,weightUsed:`Consommé`,currentWeight:`Poids restant`,measuredWeight:`Poids mesuré`,spoolName:`Bobine`,costPerKg:`Coût par kg`,storageLocation:`Emplacement de stockage`,temperature:`Température`,humidity:`Humidité`,battery:`Batterie`,storageLocationPlaceholder:`ex. Étagère A, Tiroir 1`,openInInventory:`Ouvrir dans l'inventaire`,measuredWeightError:`Le poids mesuré doit être entre {{min}}g et {{max}}g.`,slicerFilament:`Filament Slicer`,slicerFilamentName:`Nom du Preset Slicer`,slicerPreset:`Preset Slicer`,searchPresets:`Chercher presets...`,selectedPreset:`Sélectionné`,noPresetsFound:`Aucun preset trouvé`,tempOverrides:`Exceptions Température`,note:`Note`,notePlaceholder:`Notes additionnelles sur cette bobine...`,category:`Catégorie`,categoryPlaceholder:`ex. Production, Prototype, Client A`,categoryNone:`Sans catégorie`,storageLocationNone:`Aucun emplacement défini`,lowStockThresholdOverride:`Seuil bas (cette bobine)`,lowStockThresholdOverrideHelp:`Laisser vide pour utiliser le seuil global ({{global}} %).`,clearRfid:`Effacer le tag RFID`,rfidCleared:`Tag RFID effacé`,archive:`Archiver`,restore:`Restaurer`,noSpools:`Aucune bobine. Ajoutez votre première bobine pour commencer.`,noAvailableSpools:`Aucune bobine disponible. Ajoutez une bobine à votre inventaire ou désaffectez-en une d'un autre emplacement.`,kProfiles:`Profils K`,addKProfile:`Ajouter K-Profile`,assignSpool:`Assigner Bobine`,unassignSpool:`Désassigner`,assignSuccess:`Bobine assignée et slot AMS configuré`,assignPendingInsert:`Assigné. Le slot sera configuré lors de l'insertion de la bobine.`,assignFailed:`Échec assignation`,selectSpool:`Choisir une bobine pour ce slot`,assigned:`Assigné`,assigning:`Assignation...`,searchSpools:`Chercher bobines...`,showAllSpools:`Afficher toutes les bobines`,spoolmanSpools:`Bobines Spoolman`,allMaterials:`Tous Matériaux`,filterByBrand:`Filtrer par marque...`,showArchived:`Afficher archivées`,quickAdd:`Ajout rapide (Stock)`,quantity:`Quantité`,stock:`Stock`,configured:`Configuré`,spoolsCreated:`{{count}} bobines créées`,spoolsPartiallyCreated:`{{created}} sur {{total}} bobines créées (certaines ont échoué)`,spoolCreated:`Bobine créée`,spoolUpdated:`Bobine mise à jour`,spoolDeleted:`Bobine supprimée`,deepLinkSpoolNotFound:`Bobine introuvable`,deepLinkFetchFailed:`Impossible de charger la bobine — réessayez`,spoolArchived:`Bobine archivée`,spoolRestored:`Bobine restaurée`,kProfileSaveFailed:`Les paramètres de profil K n'ont pas pu être enregistrés`,syncWeightSpoolNotFound:`Bobine introuvable — elle a peut-être été supprimée`,syncWeightSpoolmanUnreachable:`Spoolman est inaccessible — réessayez plus tard`,syncWeightFailed:`Échec de la synchronisation du poids`,spoolmanUnreachable:`Spoolman est inaccessible — veuillez réessayer plus tard`,deleteSpoolNotFound:`Bobine introuvable — elle a peut-être déjà été supprimée`,deleteFailed:`Impossible de supprimer la bobine`,archiveSpoolNotFound:`Bobine introuvable — elle a peut-être déjà été supprimée`,archiveFailed:`Impossible d'archiver la bobine`,restoreSpoolNotFound:`Bobine introuvable — elle a peut-être déjà été supprimée`,restoreFailed:`Impossible de restaurer la bobine`,saveFailed:`Impossible d'enregistrer les modifications`,tagClearFailed:`Impossible de supprimer le tag`,deleteConfirm:`Supprimer définitivement cette bobine ?`,archiveConfirm:`Voulez-vous vraiment archiver cette bobine ?`,advancedSettings:`Paramètres Avancés`,filamentInfoTab:`Infos Filament`,paProfileTab:`Profil PA`,colorAndCostTab:`Couleur et coût`,printersTab:`Imprimantes`,filamentInfo:`Filament`,additional:`Additionnel`,loadingPresets:`Chargement des presets cloud...`,cloudConnected:`Cloud connecté`,cloudNotConnected:`Cloud déconnecté (valeurs par défaut)`,recentColors:`Récentes`,searchColors:`Chercher couleurs...`,searchResults:`Résultats`,allColors:`Toutes`,commonColors:`Communes`,showLess:`Moins`,showAll:`Toutes`,noColorsFound:`Aucune couleur correspondante`,noResults:`Aucun résultat`,extraColorsLabel:`Couleurs supplémentaires`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Collez 2 à 8 stops hex, séparés par des virgules. Affiché en dégradé.`,extraColorsInvalid:`Hex non valides ignorés : {{tokens}}`,colorEffectLabel:`Effet`,colorEffect:{none:`Aucun`,sparkle:`Pailleté`,wood:`Bois`,marble:`Marbre`,glow:`Lueur`,matte:`Mat`,silk:`Soie`,galaxy:`Galaxie`,rainbow:`Arc-en-ciel`,metal:`Métal`,translucent:`Translucide`,gradient:`Dégradé`,dualColor:`Bicolore`,triColor:`Tricolore`,multicolor:`Multicolore`},selectMaterialFirst:`Veuillez choisir un matériau dans l'onglet Infos Filament.`,noPrintersConfigured:`Ajoutez une imprimante pour utiliser les profils PA.`,matchingFilter:`Correspondant`,anyBrand:`Toute marque`,anyVariant:`Toute variante`,autoSelect:`Auto-sélection`,matches:`correspondances`,match:`correspondance`,noMatches:`Aucune correspondance`,connected:`Connecté`,offline:`Hors ligne`,printerOffline:`Imprimante hors ligne. Connectez-vous pour voir les profils.`,noKProfilesMatch:`Aucun profil K ne correspond au filament.`,leftNozzle:`Buse Gauche`,rightNozzle:`Buse Droite`,profilesSelected:`profil(s) de calibration sélectionné(s)`,filamentPreset:`Préréglage de filament`,presetUseSpoolDefault:`Utiliser le préréglage de la bobine`,presetInherited:`hérité`,presetOverride:`personnalisé`,presetNeedsModel:`Cette imprimante n'a pas encore indiqué son modèle, elle ne peut donc pas avoir son propre préréglage.`,autoMatchPresets:`Association automatique`,autoMatchPresetsHint:`Trouver la variante du préréglage de la bobine qui nomme chaque modèle`,kProfilesPerPrinter:`Profils K`,kProfileNotSet:`Non défini`,kProfileFlowMismatch:`Ce profil a été mesuré avec une buse {{profile}} alors qu'une buse {{fitted}} est installée : il ne sera pas appliqué`,nozzle:`Buse`,unknownModel:`Modèle inconnu`,onePrinter:`1 imprimante`,nPrinters:`{{n}} imprimantes`,filamentPresetsLoadFailed:`Impossible de charger les préréglages par modèle de cette bobine`,filamentPresetSaveFailed:`Impossible d'enregistrer les préréglages par modèle`,totalInventory:`Total Inventaire`,totalConsumed:`Total Consommé`,byMaterial:`Par Matériau`,inPrinter:`Dans Imprimante`,lowStock:`Stock Bas`,sinceTracking:`Depuis le début du suivi`,resetConsumedCounter:`Réinitialiser le compteur`,resetConsumedCounterTooltip:`Remettre à zéro le compteur de grammes consommés pour cette bobine. Le poids restant n'est pas modifié.`,resetConsumedCounterConfirm:`Remettre à 0 le compteur de grammes consommés de cette bobine ? Les futures impressions repartiront de zéro. La bobine, son calcul de poids restant et vos paramètres ne sont pas modifiés.`,resetAllConsumedCounters:`Réinitialiser tous les compteurs`,resetAllConsumedCountersTooltip:`Remettre à zéro le compteur de grammes consommés sur chaque bobine. Les poids restants ne sont pas modifiés.`,resetAllConsumedCountersConfirm:`Remettre à 0 le compteur de grammes consommés sur les {{count}} bobines (archivées incluses) ? Cela efface la valeur « Total Consommé » pour que les futures impressions repartent de zéro. Les bobines et les poids restants ne sont pas modifiés.`,consumedCounterReset:`Compteur réinitialisé`,allConsumedCountersReset:`Compteur réinitialisé pour {{count}} bobine(s)`,resetConsumedCounterFailed:`Échec de la réinitialisation du compteur`,loadedInAms:`Chargé dans AMS/Ext`,remaining:`Restant`,weightCheck:`Vérification poids`,lastWeighed:`Dernière pesée`,neverWeighed:`Jamais pesé`,search:`Chercher bobines...`,showing:`Affichage`,to:`à`,of:`sur`,show:`Voir`,spools:`bobines`,spool:`bobine`,page:`Page`,noSpoolsMatch:`Aucun résultat trouvé`,noSpoolsMatchDesc:`Ajustez votre recherche ou vos filtres.`,active:`Actif`,archived:`Archivé`,all:`Tous`,used:`Occasion`,new:`Neuf`,clearFilters:`Effacer filtres`,table:`Tableau`,cards:`Cartes`,net:`Réseau`,groupSimilar:`Grouper`,groupedSpools:`{{count}} bobines identiques`,groupedRows:`lignes`,columns:`Colonnes`,configureColumns:`Configurer Colonnes`,configureColumnsDesc:`Glissez pour ordonner ou utilisez les flèches. Cliquez sur l'œil pour masquer.`,visible:`visible`,reset:`Réinitialiser`,cancel:`Annuler`,applyChanges:`Appliquer`,moveUp:`Monter`,moveDown:`Descendre`,hideColumn:`Masquer`,showColumn:`Afficher`,linkToSpool:`Lier à une Bobine`,tagLinked:`Tag lié à la bobine`,tagLinkFailed:`Échec lien tag`,tagAlreadyLinked:`Tag déjà lié à la bobine #{{id}}`,unknownTag:`Tag RFID inconnu détecté`,usageHistory:`Historique de Consommation`,noUsageHistory:`Aucune consommation enregistrée`,printName:`Nom Impression`,weightConsumed:`Poids consommé`,clearHistory:`Effacer`,historyCleared:`Historique effacé`,fillSourceLabel:`(Inv)`,lowStockThresholdError:`Le seuil doit être compris entre 0.1 et 99.9`,assignMismatchTitle:`Incompatibilité de matériau`,assignMismatchMessage:`Le matériau de la bobine sélectionnée "{{spoolMaterial}}" ne correspond pas au matériau du plateau "{{trayMaterial}}" pour {{location}}. Assigner quand même ?`,assignMismatchConfirm:`Assigner quand même`,assignPartialMismatchMessage:`Le matériau de la bobine "{{spoolMaterial}}" est similaire, mais ne correspond pas exactement à "{{trayMaterial}}" dans {{location}}. Voulez-vous continuer ?`,assignProfileMismatchMessage:`Le profil de la bobine "{{spoolProfile}}" ne correspond pas au profil du plateau "{{trayProfile}}" dans {{location}}. Voulez-vous continuer ?`,assignReconfigureNote:`Le slot AMS sera reconfiguré pour utiliser le profil de la bobine.`,spoolmanFilamentCatalog:`Catalogue de filaments Spoolman`,pickFromSpoolmanCatalog:`Choisir dans le catalogue Spoolman…`,spoolmanFilamentSelected:`Filament sélectionné depuis le catalogue Spoolman`,spoolmanFilamentUnlinked:`Lien avec le catalogue de filaments supprimé`,noSpoolmanFilaments:`Aucun filament trouvé dans le catalogue Spoolman`,spoolmanFilamentColorSwatch:`Couleur du filament`,spoolWeightManagedBySpoolman:`Le poids de la bobine vide est géré par type de filament dans Spoolman`,spoolmanCatalogLoadFailed:`Impossible de charger le catalogue Spoolman`},timelapse:{title:`Time-lapse`,create:`Créer Timelapse`,download:`Télécharger`,delete:`Supprimer`,preview:`Aperçu`,frameRate:`Images/sec`,quality:`Qualité`,processing:`Traitement...`,noTimelapses:`Aucun timelapse`},ams:{title:`AMS`,slot:`Emplacement`,empty:`Vide`,emptySlot:`Slot vide`,slotEmpty:`Vide`,slotUnconfigured:`?`,emptySlotReset:`Aucune bobine assignée`,unknown:`Inconnu`,humidity:`Humidité`,temperature:`Température`,filamentType:`Type filament`,filamentColor:`Couleur`,remaining:`Restant`,history:`Historique AMS`,noHistory:`Aucun historique`,configureSlot:`Configurer Slot`,externalSpool:`Bobine externe`,profile:`Profil`,kFactor:`Facteur K`,kFactorShort:`K`,fill:`Remplir`,configure:`Configurer`,used:`utilisé`,remainingUnit:`restant`},printModal:{variants:{editNote:`Ces alternatives ont été définies lors de la mise en file. Annulez et remettez en file pour les modifier.`,title:`Alternatives d'imprimante`,help:`Un travail, une place dans la file. La première imprimante compatible qui se libère imprime son fichier.`,unknownModel:`Modèle inconnu`,plateFor:`Plateau pour {{filename}}`,moveUp:`Monter`,moveDown:`Descendre`,queued:`Mis en file avec {{count}} alternatives`},selectPrinter:`Choisir l'imprimante`,selectPlate:`Choisir le plateau`,filamentMapping:`Mapping Filament`,useArchiveMapping:`Mappage`,useArchiveMappingTooltip:`Sélectionner tous les emplacements à partir du mappage AMS enregistré avec cette archive (depuis le slicer), au lieu de faire correspondre par type/couleur.`,clickToChangeSlot:`Cliquez pour modifier l'attribution de l'emplacement`,reRead:`Relire`,plateN:`Plateau {{n}}`,plateFilamentsUnreadable:`Les filaments d'un plateau sélectionné n'ont pas pu être lus, il est donc impossible de l'affecter. Désélectionnez-le pour mettre les autres en file.`,totalCost:`Coût total :`,slotRemainingShort:` - {{grams}}g rest.`,printSettings:`Réglages d'impression`,bedLeveling:`Nivellement plateau`,flowCalibration:`Calibration débit`,vibrationCalibration:`Vibration (Input Shaper)`,layerInspection:`Inspection 1ère couche`,timelapse:`Time-lapse`,cancel:`Annuler`,noPrintersAvailable:`Aucune imprimante disponible`,printerBusy:`L'imprimante est occupée`,printerOffline:`L'imprimante est hors ligne`,sameTypeDifferentColor:`Même type, couleur différente`,filamentTypeNotLoaded:`Type de filament non chargé`,statusReady:`Prêt`,statusColorMismatch:`Couleur différente`,statusTypeNotFound:`Type introuvable`,requiredTooltip:`Requis : {{name}} - {{color}}`,manuallySelected:`Sélectionné manuellement`,autoMatched:`Associé automatiquement`,selectSlot:`Choisir un emplacement`,sameTypeDifferentColorDetail:`Même type, couleur différente : requiert {{required}}, l’emplacement contient {{loaded}}`,requiredTypeNotInPrinter:`Type de filament requis introuvable dans l’imprimante.`,whenToPrint:`Quand imprimer`,asap:`Dès que possible`,queue:`File`,schedule:`Planifier`,dateTime:`Date et heure`,invalidDateTime:`Veuillez saisir une date et une heure valides`,openCalendar:`Ouvrir calendrier`,requireManualStart:`Démarrage manuel requis`,requirePreviousSuccess:`Démarrer seulement si l'impression précédente a réussi`,autoOffAfter:`Éteindre l'imprimante à la fin`,helpAsap:`L'impression sera ajoutée en haut de la file et démarrera dès qu'une imprimante éligible sera inactive.`,helpSchedule:`L'impression démarrera à l'heure planifiée si l'imprimante est inactive. Si elle est occupée, elle attendra qu'elle soit disponible.`,helpQueue:`L'impression sera ajoutée à la fin de la file.`,leftNozzle:`G`,rightNozzle:`D`,leftNozzleTooltip:`Buse gauche`,rightNozzleTooltip:`Buse droite`,ftsSameInletHint:`Tous les filaments de cette impression sont sur le sélecteur de chemin de filament IN-{{inlet}}. Changer entre des filaments d'une même entrée est plus lent — déplacez-en un vers un AMS de l'autre entrée.`,rackPosition:`Position du rack`,rackPositionTooltip:`Quelle buse du rack imprime ce filament. Les positions sont numérotées comme sur l'imprimante.`,rackEmptyPosition:`Cette position du rack est vide`,rackWrongNozzle:`Contient une buse {{has}} ; ce filament nécessite {{needs}}`,filamentOverride:`Remplacement de filament`,filamentOverrideHint:`Remplacez optionnellement les filaments pour l'affectation par modèle. Le planificateur utilisera vos filaments sélectionnés au lieu des valeurs 3MF d'origine.`,originalFilament:`Original`,overrideWith:`Remplacer par`,resetToOriginal:`Revenir à l'original`,insufficientFilamentTitle:`Filament insuffisant`,waitingForAmsStatus:`En attente de l'état de l'AMS de {{printer}}…`,insufficientFilamentMessage:`Certaines bobines assignées ont moins de filament restant que nécessaire pour cette impression :`,insufficientFilamentLine:`{{printer}} - {{slot}} : nécessite {{required}}g, restant {{remaining}}g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}} : nécessite {{required}}g, {{remaining}}g disponibles sur les bobines correspondantes (AMS Filament Backup)`,printAnyway:`Imprimer quand même`,forceColorMatch:`Forcer correspondance des couleurs`,staggerPrinterStarts:`Échelonner démarrages`,staggerGroupSize:`Taille du groupe`,staggerInterval:`Intervalle (min)`,staggerPreview:`{{printers}} imprimantes → {{groups}} groupes de {{size}}, démarrage toutes les {{interval}} min`,staggerLastGroup:`dernier groupe : {{count}}`,staggerTotal:`total : {{minutes}} min`,staggerToPrinters:`Échelonner sur {{count}} imprimantes`,gcodeInjection:`Injecter le G-code auto-impression`,insufficientBudget:`Budget insuffisant`,unlimitedNoBudget:`Illimité – aucune limite de budget n’est définie.`,noPrintableCostCenters:`Aucun centre de coûts actif n’est disponible pour l’impression. Demandez à un administrateur de vous accorder l’accès à l’impression.`},backup:{includesEncryptionKey:`Les sauvegardes locales incluent le fichier de clé de chiffrement MFA (DATA_DIR/.mfa_encryption_key), donc un ZIP de sauvegarde est autonome. Traitez le ZIP comme sensible — quiconque possède le fichier peut déchiffrer les secrets client OIDC et TOTP qu'il contient.`,title:`Sauvegarde & Restauration`,createBackup:`Créer Sauvegarde`,restoreBackup:`Restaurer Sauvegarde`,restoreDescription:`Remplace les données par un fichier de sauvegarde`,downloadBackup:`Télécharger Sauvegarde`,uploadBackup:`Téléverser Sauvegarde`,lastBackup:`Dernière sauvegarde`,autoBackup:`Sauvegarde auto`,backupNow:`Sauvegarder maintenant`,restoreWarning:`Attention : Écrase TOUTES les données actuelles.`,includeArchives:`Inclure Archives`,includeSettings:`Inclure Paramètres`,includeProfiles:`Inclure Profils`,backupSuccess:`Sauvegarde réussie`,restoreSuccess:`Restauration réussie`,backupFailed:`Échec sauvegarde`,restoreFailed:`Échec restauration`,restoreNote:`L'imprimante virtuelle sera arrêtée pendant la restauration`,githubBackup:`Sauvegarde GitHub`,enabled:`Activé`,cloudLoginRequired:`Connexion Bambu Cloud requise. Connectez-vous sous Profils → Profils Cloud pour activer la sauvegarde GitHub.`,cloudLoginRequiredShort:`Connexion Cloud requise`,githubDescription:`Synchronisez automatiquement vos profils vers un dépôt GitHub privé pour la sauvegarde et l'historique des versions.`,repoIsPrivate:`Le dépôt est privé — la sauvegarde peut s'y faire en toute sécurité.`,repoIsPublicWarning:`Le dépôt est PUBLIC. Les sauvegardes Bambuddy contiennent les identifiants MQTT, les jetons Home Assistant, les jetons Prometheus, votre adresse Bambu Cloud, et les codes d'accès des imprimantes via les K-profils. L'enregistrement est bloqué tant que le dépôt n'est pas passé en privé dans les paramètres de votre hébergeur.`,repoVisibilityUnknown:`Impossible de déterminer la visibilité du dépôt. Bambuddy refuse toute sauvegarde vers un dépôt non confirmé privé ; l'enregistrement sera bloqué.`,repositoryUrl:`URL du dépôt`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Autoriser HTTP non sécurisé`,allowInsecureHttpHint:`Activer pour les instances auto-hébergées sur des réseaux privés sans TLS`,personalAccessToken:`Jeton d'accès personnel`,tokenSaved:`(enregistré)`,enterNewToken:`Entrez un nouveau jeton pour mettre à jour`,tokenHintGitHub:`Jeton à granularité fine avec accès en lecture et écriture à Contents, ou jeton classique avec la portée repo.`,tokenHintGitLab:`Jeton avec la portée api, ou read_repository et write_repository ensemble.`,tokenHintGitea:`Jeton avec la portée write:repository.`,tokenHintForgejo:`Jeton avec la portée write:repository. Un jeton limité à ce seul dépôt suffit.`,branch:`Branche`,provider:`Fournisseur Git`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Manuel uniquement`,hourly:`Toutes les heures`,daily:`Quotidien`,weekly:`Hebdomadaire`,includeInBackup:`Inclure dans la sauvegarde`,kProfiles:`K-Profils`,kProfilesDescription:`Calibration de l'avance de pression des imprimantes connectées`,noPrintersConnected:`Aucune imprimante connectée`,printersConnected:`{{connected}}/{{total}} connectées`,cloudProfiles:`Profils Cloud`,cloudProfilesDescription:`Préréglages de filament, imprimante et processus depuis Bambu Cloud et Orca Cloud`,cloudProfilesAccounts:`Comptes connectés — Bambu Cloud : {{bambu}}, Orca Cloud : {{orca}}`,appSettings:`Paramètres de l'application`,appSettingsDescription:`Configuration Bambuddy (base de données complète)`,spoolInventory:`Inventaire des bobines`,spoolInventoryDescription:`Bobines de filament, historique d'utilisation et suivi des coûts`,printArchives:`Archives d'impression`,printArchivesDescription:`Métadonnées de l'historique d'impression (pas de fichiers gcode/3MF)`,lastBackupAt:`Dernière sauvegarde :`,noBackupsYet:`Aucune sauvegarde pour l'instant`,next:`Prochaine :`,startingBackup:`Démarrage de la sauvegarde...`,test:`Tester`,enableBackup:`Activer la sauvegarde`,testConnection:`Tester la connexion`,enterRepoUrl:`Entrez l'URL du dépôt`,enterRepoAndToken:`Entrez l'URL du dépôt et le jeton d'accès`,repoRequired:`L'URL du dépôt est requise`,tokenRequired:`Le jeton d'accès est requis`,githubBackupEnabled:`Sauvegarde GitHub activée`,tokenUpdated:`Jeton mis à jour`,settingsSaved:`Paramètres enregistrés`,failedToSave:`Échec de l'enregistrement : {{message}}`,backupCompleteFiles:`Sauvegarde terminée - {{count}} fichiers mis à jour`,backupSkippedNoChanges:`Sauvegarde ignorée - aucun changement`,backupFailed2:`Échec de la sauvegarde : {{message}}`,clearedLogs:`{{count}} journaux supprimés`,failedToClearLogs:`Échec de la suppression des journaux : {{message}}`,restoreFromGit:{button:`Restaurer depuis Git`,title:`Restaurer depuis la sauvegarde Git`,subtitle:`Choisissez un commit et ce qui doit être restauré`,commitLabel:`Commit de sauvegarde`,latestCommit:`Dernière sauvegarde (tête de branche)`,categoriesLabel:`Éléments à restaurer`,inspecting:`Lecture du contenu de la sauvegarde...`,itemCount:`{{count}} dans la sauvegarde`,overwriteLabel:`Écraser les entrées existantes`,overwriteOn:`Les entrées existantes seront mises à jour depuis la sauvegarde.`,overwriteOff:`Seules les entrées manquantes sont ajoutées ; les existantes ne sont pas modifiées.`,selectedCount:`{{count}} sélectionné(s)`,restoring:`Restauration...`,confirmTitle:`Restaurer depuis la sauvegarde ?`,confirmMessage:`Les catégories sélectionnées seront restaurées depuis ce commit. Les entrées manquantes sont ajoutées, les existantes restent inchangées.`,confirmMessageOverwrite:`Les catégories sélectionnées seront restaurées depuis ce commit et les entrées déjà présentes localement seront écrasées. Cette action est irréversible.`,kprofilesOverwriteCaveat:`Les profils K sont l'exception : écrire un emplacement remplace toujours la calibration sur l'imprimante.`,tally:`{{restored}} restaurés, {{skipped}} ignorés, {{failed}} en échec`,reloadHint:`Rechargez Bambuddy pour que les données restaurées apparaissent partout.`,partialHint:`Les catégories listées ci-dessus sont terminées et enregistrées. Celles qui manquent n'ont pas été exécutées.`,failed:`Échec de la restauration.`,loadFailed:`Impossible de lire le dépôt de sauvegarde.`,details:{notPresent:`Absent de ce commit de sauvegarde`,unreadableJson:`JSON illisible : {{paths}}`,settingsNoPayload:`Aucun réglage dans les données`,settingsCredentialsWillSkip:`{{count}} clés ressemblant à des identifiants seront ignorées`,settingsCompanionWillSkip:`{{count}} clés ressemblant à des identifiants seront ignorées, et {{companion}} interrupteurs qui en dépendent resteront désactivés`,settingsCompanionOnlyWillSkip:`{{companion}} interrupteurs resteront désactivés - les identifiants dont chacun a besoin ne peuvent pas être restaurés depuis une sauvegarde`,spoolsUsageCount:`dont {{count}} enregistrements de consommation`,archivesMetadataOnly:`Métadonnées uniquement - les fichiers 3MF et les miniatures ne sont pas dans une sauvegarde Git`,kprofilesPrinterCount:`sur {{count}} imprimantes`},notes:{noData:`Aucune donnée de ce type dans cette sauvegarde`,archivesPrinterMissing:`Certaines archives référençaient des imprimantes qui n'existent plus - lien effacé`,archivesProjectMissing:`Certaines archives référençaient des projets qui n'existent plus - lien effacé`,archivesOwnerCleared:`Certaines archives référençaient des utilisateurs qui n'existent plus - propriétaire effacé, elles ne sont donc visibles que par les utilisateurs disposant de la permission archives:read_all jusqu'à ce qu'un administrateur les réattribue`,archivesOwnerUnmatched:`Certaines archives désignent un propriétaire absent de cette instance - le propriétaire a été effacé plutôt que déduit de l'identifiant utilisateur de la sauvegarde, elles ne sont donc visibles que par les utilisateurs disposant de la permission archives:read_all jusqu'à ce qu'un administrateur les réattribue`,archivesOwnerUnknown:`Certaines archives ont été restaurées sans propriétaire - cette sauvegarde n'en enregistre aucun, elles ne sont donc visibles que par les utilisateurs disposant de la permission archives:read_all jusqu'à ce qu'un administrateur les réattribue`,archivesUndeleted:`Les archives supprimées depuis la sauvegarde sont de nouveau visibles - l'écrasement était activé`,archivesMetadataOnly:`Les archives restaurées ne contiennent que des métadonnées - les fichiers 3MF et les miniatures ne sont pas dans une sauvegarde Git`,spoolUsageUnresolved:`{{count}} enregistrements de consommation ignorés - leur bobine ne figure pas dans la liste des bobines de cette sauvegarde, il n'y a donc rien à quoi les rattacher.`,spoolUsageUnlinked:`{{count}} enregistrements de consommation restaurés sans leur lien vers l'historique d'impression - sélectionnez Archives d'impression en même temps que l'Inventaire des bobines pour le conserver.`,spoolTagKept:`{{count}} étiquettes de bobine laissées telles quelles - la sauvegarde aurait effacé une étiquette scannée depuis, ou l'aurait déplacée sur une seconde bobine.`,settingsCredentialsSkipped:`{{count}} clés ressemblant à des identifiants ignorées - ressaisissez les secrets manuellement`,settingsAuthSkipped:`{{count}} réglages d'authentification ignorés - modifiez-les dans Réglages > Authentification pour que les contrôles de verrouillage s'appliquent`,settingsCompanionSkipped:`{{keys}} laissés désactivés - l'identifiant dont chacun a besoin ne peut pas être restauré depuis une sauvegarde et cette instance n'en a aucun enregistré ; les activer laisserait donc l'intégration sans authentification`,settingsMqttRelayFailed:`Réglages MQTT restaurés, mais le relais n'a pas pu être reconnecté - redémarrez Bambuddy`,kprofilesAlwaysOverwrite:`Les profils K écrasent toujours l'emplacement correspondant sur l'imprimante`,kprofilesAckUnreliable:`Une imprimante qui ne répond pas compte quand même comme restaurée - vérifiez les profils sur l'imprimante`,kprofilesPrinterMissing:`Aucune imprimante avec le numéro de série {{serial}} - ignoré`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) n'est pas connectée - ignoré`,kprofilesUnknownNozzle:`Diamètre de buse inattendu {{nozzle}} pour {{serial}} - envoyé tel quel`,kprofilesUnmatched:`{{count}} profils pour {{nozzle}} n'avaient pas d'équivalent sur {{printer}} - ajoutés comme nouveaux profils`,kprofilesSendFailed:`Impossible d'envoyer les profils {{nozzle}} à {{printer}} ({{serial}})`,kprofilesRefused:`{{printer}} ({{serial}}) a refusé les profils {{nozzle}} : {{reason}}`,kprofilesStepFailed:`L'étape des profils K n'a pas pu être terminée - {{reason}}. Ce qui a été restauré auparavant reste enregistré.`}},history:`Historique`,clear:`Effacer`,date:`Date`,status:`Statut`,trigger:`Type`,triggers:{manual:`Sauvegarde (manuelle)`,scheduled:`Sauvegarde (planifiée)`,restore:`Restauration`},commit:`Commit`,localBackup:`Sauvegarde locale`,localBackupDescription:`Créez une sauvegarde complète de vos données Bambuddy incluant la base de données, les archives, les téléchargements et tous les fichiers.`,downloadBackupLabel:`Télécharger la sauvegarde`,completeBackupZip:`Sauvegarde complète : base de données + tous les fichiers (ZIP)`,download:`Télécharger`,preparingBackup:`Préparation de la sauvegarde...`,creatingArchive:`Création de l'archive de sauvegarde... Cela peut prendre un moment pour les archives volumineuses.`,downloadingFile:`Téléchargement du fichier de sauvegarde...`,backupDownloaded:`Sauvegarde téléchargée avec succès`,failedToCreateBackup:`Échec de la création de la sauvegarde : {{message}}`,restore:`Restaurer`,restoreReplacesAll:`La restauration remplace toutes les données.`,restoreReplacesAllDetail:`Votre base de données et vos fichiers actuels seront complètement remplacés. Un redémarrage est nécessaire après la restauration.`,restoreConfirmTitle:`Restaurer la sauvegarde`,restoreConfirmMessage:`Êtes-vous sûr de vouloir restaurer depuis "{{filename}}" ? Cela remplacera complètement votre base de données et tous vos fichiers. L'application devra être redémarrée après la restauration.`,restoreConfirmButton:`Restaurer la sauvegarde`,uploadingFile:`Téléchargement du fichier de sauvegarde...`,backupRestoredRestart:`Sauvegarde restaurée. Veuillez redémarrer Bambuddy.`,failedToRestore:`Échec de la restauration. Veuillez vérifier le format du fichier.`,reloadNow:`Recharger maintenant`,creatingBackup:`Création de la sauvegarde`,restoringBackup:`Restauration de la sauvegarde`,preparing:`Préparation...`,processing:`Traitement...`,doNotClosePage:`Veuillez ne pas fermer cette page ni naviguer ailleurs. Cette opération peut prendre plusieurs minutes pour les sauvegardes volumineuses.`,restoring:`Restauration...`,restoreComplete:`Restauration terminée`,restoreFailed2:`Échec de la restauration`,importSettings:`Importer les paramètres depuis un fichier de sauvegarde`,pleaseWaitRestoring:`Veuillez patienter pendant la restauration de vos données`,selectBackupFile:`Cliquez pour sélectionner un fichier de sauvegarde (.json ou .zip)`,duplicateHandling:`Comment fonctionne la gestion des doublons :`,matchPrinters:`Imprimantes`,matchPrintersBy:`correspondance par numéro de série`,matchSmartPlugs:`Prises connectées`,matchSmartPlugsBy:`correspondance par adresse IP`,matchNotificationProviders:`Fournisseurs de notifications`,matchNotificationProvidersBy:`correspondance par nom`,matchFilaments:`Filaments`,matchFilamentsBy:`correspondance par nom + type + marque`,matchArchives:`Archives`,matchArchivesBy:`correspondance par hash de contenu (toujours ignoré)`,matchPendingUploads:`Téléchargements en attente`,matchPendingUploadsBy:`correspondance par nom de fichier`,matchSettingsTemplates:`Paramètres et modèles`,matchSettingsTemplatesBy:`toujours écrasés`,replaceExisting:`Remplacer les données existantes`,keepExisting:`Conserver les données existantes`,overwriteDescription:`Écraser les éléments qui existent déjà avec les données de sauvegarde`,keepDescription:`Restaurer uniquement les éléments qui n'existent pas encore`,overwriteCaution:`Attention :`,overwriteWarning:`L'écrasement remplacera vos configurations actuelles par les données de la sauvegarde. Les codes d'accès des imprimantes ne sont jamais écrasés pour des raisons de sécurité.`,cancel:`Annuler`,processingBackup:`Traitement du fichier de sauvegarde...`,itemsRestored:`Éléments restaurés`,itemsSkipped:`Éléments ignorés`,restored:`Restaurés`,skippedAlreadyExist:`Ignorés (existent déjà)`,filesCategory:`Fichiers (3MF, miniatures, etc.)`,andMore:`...et {{count}} de plus`,newApiKeysGenerated:`Nouvelles clés API générées`,keysShownOnce:`Ces clés ne sont affichées qu'une seule fois. Copiez-les maintenant !`,copy:`Copier`,noDataFound:`Aucune donnée à restaurer n'a été trouvée dans le fichier de sauvegarde.`,close:`Fermer`,scheduledBackup:`Sauvegardes planifiées`,scheduledBackupDescription:`Crée automatiquement des instantanés de sauvegarde selon un planning. Le répertoire de sortie peut être monté sur un NAS ou un stockage externe.`,frequency:`Fréquence`,backupTime:`Temps`,retention:`Rétention`,retentionDescription:`Nombre de sauvegardes à conserver`,outputPath:`Chemin de sortie`,outputPathPlaceholder:`Par défaut : {{path}}`,outputPathDescription:`Laisser vide pour l'emplacement par défaut`,runNow:`Exécuter maintenant`,backupFiles:`Fichiers de sauvegarde`,noScheduledBackups:`Aucune sauvegarde`,deleteBackup:`Supprimer`,deleteBackupConfirm:`Supprimer ce fichier de sauvegarde ?`,backupRunning:`Sauvegarde en cours...`,scheduledBackupComplete:`Sauvegarde terminée avec succès`,scheduledBackupFailed:`Échec de la sauvegarde`,nextBackup:`Prochaine sauvegarde`,backupSize:`Taille`,localTimeHint:`Heure locale ({{tz}})`,defaultPathLabel:`Par défaut :`,pathCheck:{title:`Bambuddy ne peut pas écrire dans ce répertoire`,howToFix:`Comment corriger :`,sandboxed:`Le service Bambuddy ne peut pas écrire dans {{path}}. Son unité systemd s'exécute avec ProtectSystem=strict, ce qui rend tout répertoire en dehors des répertoires d'installation, de données et de journaux en lecture seule pour le service - même un répertoire dans lequel vous pouvez écrire depuis votre propre shell.`,read_only:`{{path}} se trouve sur un système de fichiers en lecture seule.`,permission_denied:`Bambuddy n'est pas autorisé à écrire dans {{path}}. Vérifiez le propriétaire et les permissions du répertoire.`,no_space:`Le système de fichiers contenant {{path}} est plein.`,not_a_directory:`{{path}} existe mais n'est pas un répertoire.`,missing:`{{path}} n'existe pas et n'a pas pu être créé.`,error:`Bambuddy ne peut pas écrire dans {{path}}.`,ephemeralTitle:`Ces sauvegardes ne survivront pas à la recréation du conteneur`,container_ephemeral:`{{path}} se trouve dans le conteneur Bambuddy, pas sur l'hôte. Les sauvegardes qui y sont écrites sont perdues à la recréation du conteneur. Montez le répertoire depuis l'hôte :`},categories:{settings:`Paramètres`,notification_providers:`Fournisseurs de notifications`,notification_templates:`Modèles de notifications`,smart_plugs:`Prises connectées`,printers:`Imprimantes`,filaments:`Filaments`,maintenance_types:`Types de maintenance`,archives:`Archives`,projects:`Projets`,pending_uploads:`Téléchargements en attente`,external_links:`Liens externes`,api_keys:`Clés API`}},tags:{title:`Étiquettes`,addTag:`Ajouter Tag`,editTag:`Modifier Tag`,deleteTag:`Supprimer Tag`,tagName:`Nom du Tag`,tagColor:`Couleur du Tag`,noTags:`Aucun tag`,deleteConfirm:`Supprimer ce tag ?`,manageTags:`Gérer les Tags`},uploadModal:{title:`Téléverser des fichiers 3MF`,dragDrop:`Glissez les fichiers .3mf ici`,or:`ou`,browseFiles:`Parcourir`,extractionInfo:`Le modèle d'imprimante est extrait des métadonnées 3MF.`,uploaded:`téléversé`,failed:`échoué`,uploading:`En cours...`,upload:`Téléverser`,uploadFailed:`Échec du téléversement`},editArchive:{title:`Modifier l'archive`,name:`Nom`,namePlaceholder:`Nom de l'impression`,printer:`Imprimante`,noPrinter:`Aucune imprimante`,project:`Projet`,noProject:`Aucun projet`,itemsPrinted:`Nombre de pièces`,itemsPrintedHelp:`Nombre d'objets produits. Indiquez 0 si tout le plateau est raté.`,filamentUsed:`Filament utilisé (g)`,filamentUsedPlaceholder:`p. ex. 46.16`,filamentUsedHelp:`À saisir à la main lorsqu'une impression a été archivée sans son 3MF, afin qu'elle compte quand même dans les totaux de filament. Une nouvelle analyse d'une archive qui possède son 3MF relit la valeur depuis le fichier.`,notes:`Notes`,notesPlaceholder:`Notes sur l'impression...`,externalLink:`Lien externe`,externalLinkPlaceholder:`https://...`,externalLinkHelp:`Lien vers Printables, Thingiverse, etc.`,tags:`Étiquettes`,tagsPlaceholder:`Ajouter des tags...`,addMoreTags:`Plus de tags...`,matchingTags:`Correspondant à "{{query}}"`,existingTags:`Tags existants`,clickToAdd:`(cliquer pour ajouter)`,status:`Statut`,failureReason:`Raison de l'échec`,selectReason:`Choisir raison...`,photos:`Photos du résultat`,photosHelp:`Cliquez sur + pour ajouter des photos`,printResult:`Résultat d'impression`,saving:`Enregistrement...`,failureReasons:{adhesionFailure:`Défaut d'adhésion`,spaghettiDetached:`Spaghetti / Détaché`,layerShift:`Décalage de couche`,cloggedNozzle:`Buse bouchée`,filamentRunout:`Filament fini`,warping:`Warping (Déformation)`,stringing:`Stringing (Cheveux d'ange)`,underExtrusion:`Sous-extrusion`,powerFailure:`Coupure courant`,userCancelled:`Annulé par l'utilisateur`,noStatusUpdate:`Aucune mise à jour d'état reçue`,other:`Autre`},statuses:{completed:`Réussie`,failed:`Échouée`,aborted:`Annulée`,printing:`Impression`}},kProfiles:{title:`Profils K`,noPrintersConfigured:`Aucune imprimante configurée`,addPrinterInSettings:`Ajoutez une imprimante pour gérer les K-profiles`,noActivePrinters:`Aucune imprimante active`,enablePrinterConnection:`Activez la connexion pour voir les K-profiles`,loadingProfiles:`Chargement des K-Profiles...`,printerOffline:`Imprimante hors ligne`,printerOfflineDesc:`L'imprimante doit être allumée.`,noMatchingProfiles:`Aucun profil correspondant`,noMatchingProfilesDesc:`Ajustez votre recherche`,noKProfiles:`Aucun K-Profile`,noKProfilesDesc:`Aucun profil trouvé pour une buse de {{diameter}}mm`,createFirstProfile:`Créer le premier profil`,printer:`Imprimante`,nozzle:`Buse`,refresh:`Rafraîchir`,addProfile:`Ajouter Profil`,export:`Exporter`,import:`Importer`,select:`Choisir`,selectAll:`Tout sélectionner`,delete:`Supprimer`,searchPlaceholder:`Nom ou filament...`,allExtruders:`Tous les extrudeurs`,leftOnly:`Gauche uniquement`,rightOnly:`Droite uniquement`,allFlow:`Tout débit`,hfOnly:`HF uniquement`,sOnly:`S uniquement`,sortName:`Tri : Nom`,sortKValue:`Tri : Valeur K`,sortFilament:`Tri : Filament`,leftExtruder:`Extrudeur gauche`,rightExtruder:`Extrudeur droit`,modal:{addTitle:`Ajouter K-Profile`,editTitle:`Modifier K-Profile`,profileName:`Nom du profil`,profileNamePlaceholder:`ex: Mon profil PLA`,kValue:`Valeur K`,kValuePlaceholder:`0.020`,kValueHelp:`Plage type : 0.01-0.06 (PLA), 0.02-0.10 (PETG)`,filament:`Filament`,selectFilament:`Choisir filament...`,source:{local:`Importé`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Inclus`},noFilamentsHelp:`Aucun filament disponible. Connectez-vous à Bambu Cloud ou importez des préréglages dans Profils → Profils locaux.`,searchFilaments:`Rechercher des filaments...`,noFilamentMatches:`Aucun filament ne correspond à cette recherche`,flowType:`Type de débit`,highFlow:`Haut Débit (HF)`,standard:`Standard`,nozzleSize:`Taille buse`,extruder:`Extrudeur`,extruders:`Extrudeurs`,left:`Gauche`,right:`Droite`,notes:`Notes (locales)`,notesPlaceholder:`Notes sur ce profil...`,notesHelp:`Enregistré dans Bambuddy, pas sur l'imprimante`,syncing:`Sync avec l'imprimante...`,savingExtruder:`Sauvegarde extrudeur {{current}}/{{total}}...`,pleaseWait:`Patientez...`},deleteConfirm:{title:`Supprimer profil`,cannotUndo:`Action irréversible`,message:`Supprimer "{{name}}" de l'imprimante ?`},bulkDelete:{title:`Supprimer les profils`,cannotUndo:`Action irréversible`,message:`Supprimer les {{count}} profils de l'imprimante ?`},toast:{profileSaved:`Profil K enregistré`,profilesSaved:`Profil K enregistré sur {{count}} extrudeur(s)`,selectAtLeastOneExtruder:`Sélectionnez un extrudeur`,selectFilament:`Sélectionnez d’abord un filament`,filamentNotResolvable:`Aucun identifiant de filament Bambu pour {{name}} — l’imprimante ne peut pas enregistrer de profil`,profileDeleted:`Profil K supprimé`,profilesDeleted:`{{count}} profils supprimés`,exportedProfiles:`{{count}} profils exportés`,importedProfiles:`{{count}} sur {{total}} profils importés`,noProfilesToExport:`Rien à exporter`,invalidFileFormat:`Format invalide`,failedToParseImport:`Échec analyse fichier`,failedToSaveBatch:`Échec enregistrement groupé`,noteSaved:`Note enregistrée`,failedToSaveNote:`Échec note`},permission:{noRead:`Pas d'autorisation lecture`,noCreate:`Pas d'autorisation création`,noUpdate:`Pas d'autorisation mise à jour`,noDelete:`Pas d'autorisation suppression`,noExport:`Pas d'autorisation export`,noImport:`Pas d'autorisation import`}},virtualPrinter:{title:`Imprimante Virtuelle`,running:`En cours`,stopped:`Arrêtée`,description:{default:`Active une imprimante qui apparaît dans Bambu Studio. Les fichiers envoyés sont archivés sans impression.`,proxy:`Active un proxy qui relaie le trafic vers une imprimante réelle, permettant l'impression à distance.`},enable:{title:`Activer l'imprimante virtuelle`,visibleInSlicer:`Visible comme "Bambuddy" dans le Slicer`,proxyingTo:`Proxy vers {{name}}`,notActive:`Inactive`},model:{title:`Modèle d'imprimante`,description:`Choisissez le modèle à émuler.`,restartWarning:`Changer le modèle redémarrera le service`},accessCode:{title:`Code d'accès`,isSet:`Code défini`,notSet:`Code requis pour activer`,placeholder:`Code 8 char`,placeholderChange:`Entrez nouveau code`,hint:`Exactement 8 caractères. Sert à l'auth du Slicer.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Hérité de l'imprimante cible`,derivedFromTargetHint:`Utilise le code d'accès de l'imprimante cible. Le pont transmet l'authentification du slicer à l'imprimante réelle, donc les codes doivent correspondre — modifiez le code dans les paramètres de l'imprimante.`,reveal:`Afficher le code d'accès`,hide:`Masquer le code d'accès`},targetPrinter:{title:`Imprimante cible`,configured:`Cible configurée`,notConfigured:`Imprimante requise pour mode Proxy`,placeholder:`Choisir imprimante...`,hint:`L'imprimante doit être en mode LAN.`,noPrinters:`Ajoutez une imprimante réelle d'abord.`},remoteInterface:{title:`Exception Interface Réseau`,configured:`Override actif`,optional:`Optionnel - si IP auto est fausse (VPN, Docker, multi-NIC).`,placeholder:`Auto (défaut)...`,hint:`Force l'IP annoncée via SSDP.`},mode:{title:`Mode`,archive:`Archiver`,archiveDesc:`Archive immédiatement`,review:`Revue`,reviewDesc:`Attendre revue avant archive`,queue:`File`,queueDesc:`Archiver et ajouter à la file`,proxy:`Proxy`,proxyDesc:`Relais vers imprimante réelle`},autoDispatch:{title:`Lancement automatique`,description:`Lancer automatiquement les impressions ajoutées à la file. Désactivé, les impressions attendent un lancement manuel.`},queueForceColorMatch:{title:`Forcer la correspondance des couleurs`,description:`Refuser l'envoi vers une imprimante qui n'a pas exactement le type de filament et la couleur chargés. Désactivé par défaut — sans cela, la file d'attente utilise uniquement la correspondance par modèle et peut choisir une imprimante avec la mauvaise couleur.`},saveAmsMapping:{title:`Enregistrer le mappage AMS`,description:`Conserve dans l'archive le choix d'emplacement AMS propre au slicer (depuis la commande MQTT project_file), afin qu'une réimpression ultérieure réutilise la même bobine physique au lieu de la redéduire à partir du type/de la couleur du fichier. Désactivé par défaut.`},gcodeInjection:{title:`Injection G-code`,description:`Applique les extraits de G-code configurés par modèle dans les Paramètres aux travaux de ce VP. Désactivé par défaut.`},tailscaleDisabled:{title:`Intégration Tailscale`,description:`Activez pour marquer ce VP comme exposé via Tailscale. Affiche l'adresse Tailscale de l'hôte pour que vous sachiez quelle IP coller dans le slicer. L'étape d'import CA est inchangée — cette bascule n'a aucun effet sur les certificats.`},setupRequired:{title:`Configuration requise`,description:`Nécessite des réglages système (ports, pare-feu).`,readGuide:`Lire le guide de configuration`},howItWorks:{title:`Fonctionnement`,step1:`Sur le même LAN, les imprimantes virtuelles apparaissent automatiquement dans votre slicer (Bambu Studio / OrcaSlicer). Depuis d'autres réseaux, ajoutez-les manuellement par adresse IP et code d'accès.`,step2:`En mode Archive, Revue et File d'attente, utilisez le bouton "Envoyer" dans votre slicer pour envoyer des fichiers 3MF à Bambuddy. Le slicer affichera "Impression réussie" — le fichier est stocké, pas imprimé.`,step3:`En mode Proxy, l'imprimante virtuelle relaie tout le trafic vers une vraie imprimante — les impressions démarrent immédiatement comme en connexion directe.`},status:{title:`Détails du statut`,printerName:`Nom`,model:`Modèle`,serialNumber:`Série`,mode:`Mode`,pendingFiles:`Fichiers en attente`,targetPrinter:`Cible`,ftpPort:`Port FTP`,mqttPort:`Port MQTT`,ftpConnections:`Connexions FTP`,mqttConnections:`Connexions MQTT`},toast:{updated:`Réglages virtuels mis à jour`,failedToUpdate:`Échec mise à jour`,copyFailed:`Échec de la copie — veuillez sélectionner le texte manuellement`,accessCodeRequired:`Code d'accès requis`,targetPrinterRequired:`Imprimante cible requise`,bindIpRequired:`Veuillez d'abord définir une adresse IP`,accessCodeEmpty:`Le code ne peut pas être vide`,accessCodeLength:`Le code doit faire 8 caractères`,targetCodeChangedRebind:`Le code d'accès correspond désormais à la nouvelle imprimante cible. Réajoutez cet appareil dans votre slicer pour récupérer le nouveau code.`,created:`Imprimante virtuelle créée`,failedToCreate:`Échec de la création de l'imprimante virtuelle`,deleted:`Imprimante virtuelle supprimée`,failedToDelete:`Échec de la suppression de l'imprimante virtuelle`},list:{title:`Imprimantes virtuelles`,add:`Ajouter`,addFirst:`Ajouter une imprimante virtuelle`,empty:`Aucune imprimante virtuelle configurée. Ajoutez-en une pour commencer.`},bindIp:{title:`Interface réseau`,placeholder:`Sélectionner interface...`,hint:`Interface réseau sur laquelle cette imprimante virtuelle écoute. Doit être unique par imprimante.`},proxy:{accessCodeHint:`En mode proxy, utilisez le code d'accès de l'imprimante cible dans le slicer. La connexion est transmise de manière transparente à l'imprimante réelle.`},addDialog:{title:`Ajouter une imprimante virtuelle`,name:`Nom`,hint:`Vous pourrez configurer le code d'accès, l'imprimante cible et d'autres paramètres après la création.`,create:`Créer`},deleteConfirm:{title:`Supprimer l'imprimante virtuelle`,message:`Êtes-vous sûr de vouloir supprimer "{{name}}" ? Cela arrêtera tous les services de cette imprimante.`},archiveNameSource:{title:`Source du nom d'archive`,description:`Choisissez comment les nouvelles archives sont nommées lorsque les fichiers arrivent via l'imprimante virtuelle. "Métadonnées" utilise le titre intégré par le slicer dans le 3MF (par défaut). "Nom de fichier" utilise le nom envoyé par Bambu Studio en FTP. Note : Bambu Studio écrase le nom que vous saisissez dans la boîte "envoyer à l'imprimante" avec le champ Titre du 3MF lorsque celui-ci est présent, les deux modes produisent donc souvent la même chaîne.`,metadata:`Métadonnées`,filename:`Nom de fichier`},caCert:{title:`Certificat du slicer`,description:`Les imprimantes virtuelles utilisent un certificat TLS signé par l'autorité de certification Bambuddy. Importez ce certificat CA dans le magasin de confiance de votre slicer une seule fois pour qu'il accepte la connexion — plus besoin de le copier depuis la ligne de commande.`,copy:`Copier`,copied:`Copié`,download:`Télécharger`,fingerprint:`SHA-256`}},modelViewer:{openInSlicer:`Ouvrir dans le Slicer`,openInSlicerWith:`Ouvrir dans {{slicer}}`,moreSlicerOptions:`Plus d'options de slicer`,openInSlicerFailed:`Impossible d'ouvrir dans le slicer`,tabs:{model:`Modèle 3D`},notAvailable:`indisponible`,plates:`Plateaux`,allPlates:`Tous les plateaux`,plateNumber:`Plateau {{number}}`,plateCount:`{{count}} plateau`,plateCount_other:`{{count}} plateaux`,objectCount:`{{count}} objet`,objectCount_other:`{{count}} objets`,filamentCount:`{{count}} filament`,filamentCount_other:`{{count}} filaments`,eta:`Fin {{minutes}} min`,noPreview:`Aucun aperçu pour ce fichier`,pagination:{pageOf:`Page {{current}} sur {{total}}`,prev:`Préc`,next:`Suiv`},errors:{failedToLoad:`Échec chargement fichier`,noMeshes:`Aucun maillage trouvé dans le 3MF`,unsupportedFormat:`Format non supporté`}},maintenanceDescriptions:{lubricateCarbonRods:`Appliquer du lubrifiant sur les tiges carbone pour un mouvement fluide`,lubricateRails:`Appliquer du lubrifiant sur les rails linéaires`,cleanNozzle:`Nettoyer buse et hotend anti-bouchage`,checkBelts:`Tension des courroies pour la précision`,cleanBuildPlate:`Nettoyage plateau pour l'adhésion`,checkExtruder:`Usure des engrenages de l'extrudeur`,checkCooling:`Bon fonctionnement des ventilateurs`,generalInspection:`Inspection générale de la machine`,cleanCarbonRods:`Nettoyer les tiges carbone (friction)`,lubricateSteelRods:`Appliquer du lubrifiant sur les tiges en acier pour un mouvement fluide`,cleanSteelRods:`Nettoyer les tiges en acier (friction)`,cleanLinearRails:`Essuyer les rails linéaires (poussière/débris)`,checkPtfeTube:`Usure ou dommage du tube PTFE`,replaceHepaFilter:`Filtre HEPA pour la qualité de l'air`,replaceCarbonFilter:`Filtre charbon actif (odeurs)`,lubricateLeftNozzleRail:`Lubrifier le rail de buse gauche (Série H2)`},haSensors:{label:`Capteurs`,unavailable:`Indisponible`,blocksPrints:`{{entity}} — retient les impressions tant que l'alerte est active`,states:{open:`Ouvert`,closed:`Fermé`,unlocked:`Déverrouillé`,locked:`Verrouillé`,detected:`Détecté`,clear:`Dégagé`,wet:`Humide`,dry:`Sec`,problem:`Problème`,ok:`OK`,running:`En marche`,stopped:`Arrêté`,on:`Activé`,off:`Désactivé`},sectionTitle:`Capteurs Home Assistant (imprimantes)`,add:`Ajouter un capteur`,addTitle:`Ajouter un capteur Home Assistant`,editTitle:`Modifier le capteur Home Assistant`,empty:`Aucun capteur pour l'instant. Liez un contact de porte ou un thermomètre depuis Home Assistant pour l'afficher sur la carte imprimante.`,unknownPrinter:`Imprimante inconnue`,badgeBlocks:`Retient les impressions`,badgeNotifies:`Notifie`,badgeHidden:`Masqué sur la carte`,printer:`Imprimante`,entity:`Entité`,searchPlaceholder:`Rechercher des entités...`,noEntities:`Aucune entité correspondante`,name:`Nom affiché`,alertWhen:`Alerter quand`,alertNever:`Jamais — affichage seul`,alertAbove:`Au-dessus de`,alertBelow:`En dessous de`,alertHint:`L'état d'alerte met le capteur en évidence sur la carte imprimante et active les options ci-dessous.`,showOnCard:`Afficher sur la carte imprimante`,notifyOnAlert:`Envoyer une notification au déclenchement de l'alerte`,blockPrint:`Retenir les impressions en file tant que l'alerte est active`,blockPrintHint:`Les travaux restent en file et démarrent d'eux-mêmes une fois le capteur revenu à la normale. Ignoré tant que Home Assistant est injoignable.`,toast:{created:`Capteur ajouté`,updated:`Capteur enregistré`,deleted:`Capteur supprimé`},error:{pickEntity:`Choisissez une entité Home Assistant`,nameRequired:`Saisissez un nom affiché`,printerRequired:`Choisissez une imprimante`,alertRequired:`Définissez d'abord une condition d'alerte`}},locationHaSensors:{sectionTitle:`Capteurs Home Assistant (emplacements de stockage)`,sectionDescription:`Associez des capteurs de température, d'humidité ou de batterie Home Assistant à vos emplacements de stockage pour afficher les relevés en direct sur la fiche du filament et dans le tableau. Un seul capteur par catégorie est autorisé par emplacement.`,add:`Ajouter un capteur`,addTitle:`Ajouter un capteur Home Assistant`,editTitle:`Modifier le capteur Home Assistant`,empty:`Aucun capteur pour l'instant. Liez un capteur de température ou d'humidité depuis Home Assistant pour l'afficher sur la carte filament.`,unknownLocation:`Emplacement inconnu`,location:`Emplacement de stockage`,showOnCard:`Afficher sur la carte filament`,overwriteConfirm:{title:`Remplacer le capteur existant\xA0?`,messageTemperature:`« {{location}} » a déjà un capteur de température lié : {{name}}. Continuer le remplacera.`,messageHumidity:`« {{location}} » a déjà un capteur d'humidité lié : {{name}}. Continuer le remplacera.`,messageBattery:`« {{location}} » a déjà un capteur de batterie lié : {{name}}. Continuer le remplacera.`},autoAdd:{confirmTitle:`Ajouter aussi les autres capteurs ?`,confirmMessage:`Bambuddy a également trouvé d'autres capteurs pour cet emplacement. Choisissez ceux à ajouter aussi.`,added:`Également ajouté : {{names}}`,noneFound:`Aucun capteur de température, d'humidité ou de batterie correspondant trouvé pour cet emplacement.`,onlyThisOne:`Seulement celui-ci`},options:{buttonLabel:`Options des capteurs`,title:`Options des capteurs d'emplacement`,description:`Ces valeurs sont utilisées lorsqu'un capteur de température, d'humidité ou de batterie est lié automatiquement avec le premier capteur d'un emplacement.`,generalSettings:`Paramètres généraux`,pollInterval:`Intervalle de mise à jour (secondes)`,pollIntervalHint:`Fréquence à laquelle Bambuddy interroge Home Assistant et actualise les valeurs des capteurs à l'écran. Minimum 60 secondes.`,colorizeValues:`Colorer les valeurs des capteurs selon leurs seuils d'alerte`,aboveColor:`Couleur au-dessus du seuil`,belowColor:`Couleur en dessous du seuil`,optimalColor:`Couleur pour la valeur optimale`,colors:{red:`Rouge`,orange:`Orange`,yellow:`Jaune`,green:`Vert`,blue:`Bleu`,purple:`Violet`,pink:`Rose`},saved:`Options enregistrées`,saveFailed:`Échec de l'enregistrement des options`,reset:`Réinitialiser`,resetConfirm:{title:`Réinitialiser tous les capteurs d'emplacement existants ?`,message:`Cela écrase les seuils d'alerte, les notifications et la visibilité sur la carte de tous les capteurs de température, d'humidité et de batterie d'emplacement existants avec les valeurs configurées ci-dessus, et restaure le nom de chaque capteur avec son nom convivial Home Assistant — les capteurs d'imprimante ne sont pas concernés. Cette action est irréversible. Selon le nombre de capteurs, cela peut prendre un moment.`},resetDone:`Appliqué à {{count}} capteurs d'emplacement`,resetFailed:`Échec de la réinitialisation des capteurs d'emplacement`},deleteAllConfirm:{title:`Supprimer tous les capteurs ?`,message:`Cela supprime les {{count}} capteurs liés à « {{location}} ». Cette action est irréversible.`},currentlyBound:`Actuellement lié : {{entity}}`,error:{locationRequired:`Choisissez un emplacement de stockage`},toast:{created:`Capteur ajouté`,updated:`Capteur enregistré`,deleted:`Capteur supprimé`}},smartPlugs:{offline:`Hors ligne`,admin:`Administrateur`,openPlugAdminPage:`Page admin de la prise`,deleteSmartPlug:`Supprimer la prise`,turnOnSmartPlug:`Allumer la prise`,turnOffSmartPlug:`Éteindre la prise`,turnOn:`Allumer`,turnOff:`Éteindre`,addSmartPlug:{scanningNetwork:`Scan réseau...`,chooseEntity:`Choisir une entité...`,connectionFailed:`Échec connexion`,searchEntities:`Chercher entités...`,searchPowerSensors:`Capteurs puissance...`,searchEnergySensors:`Capteurs énergie...`,placeholders:{plugName:`Prise Salon`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Identique au topic puissance, ou différent`}},linkedTo:`Lié à :`,monitorOnly:`Surveillance uniquement`,alerts:`Alertes`,scheduleOn:`À {{time}}`,scheduleOff:`Désactivé {{time}}`,on:`On`,off:`Désactivé`,power:`Puissance`,kwhToday:`kWh Aujourd'hui`,settings:`Paramètres`,automationSettings:`Paramètres d'automatisation`,showInSwitchbar:`Afficher dans la barre de commutateurs`,quickAccessSidebar:`Accès rapide depuis la barre latérale`,enabled:`Activé`,enableAutomation:`Activer l'automatisation pour cette prise`,autoOn:`Auto Activé`,autoOnDescription:`Allumer au démarrage de l'impression`,autoOff:`Auto Désactivé`,autoOffDescription:`Éteindre à la fin de l'impression (unique)`,autoOffPersistent:`Garder activé`,autoOffPersistentDescription:`Rester activé entre les impressions au lieu d'une seule fois`,controlsPrinterPower:`Alimente l'imprimante`,controlsPrinterPowerDescription:`Désactivez si cette prise n'alimente qu'un accessoire (ventilateur de filtre, éclairage). Sinon, l'éteindre marque l'imprimante hors ligne.`,autoOffAfterDrying:`Arrêt auto après séchage`,autoOffAfterDryingDescription:`Éteindre à la fin du séchage de l'AMS`,delayAfterDryingMinutes:`Délai après séchage (minutes)`,turnOffDelayMode:`Mode de délai d'extinction`,time:`Temps`,temp:`Temp.`,delayMinutes:`Délai (minutes)`,tempThreshold:`Seuil de température (°C)`,tempThresholdDescription:`S'éteint lorsque la buse refroidit en dessous de cette température`,edit:`Modifier`,deleteConfirm:`Êtes-vous sûr de vouloir supprimer "{{name}}" ? Cette action est irréversible.`,turnOnConfirm:`Êtes-vous sûr de vouloir allumer "{{name}}" ?`,turnOffConfirm:`Êtes-vous sûr de vouloir éteindre "{{name}}" ? Cela coupera l'alimentation de l'appareil connecté.`,failedToTurn:`Impossible de {{action}} "{{name}}"`,unknown:`Inconnu`,addTitle:`Ajouter une prise connectée`,editTitle:`Modifier la prise connectée`,stopScanning:`Arrêter le scan`,discoverTasmota:`Découvrir les appareils Tasmota`,foundDevices:`{{count}} appareil(s) trouvé(s) - cliquez pour sélectionner :`,noDevicesFound:`Aucun appareil Tasmota trouvé sur votre réseau`,haNotConfigured:`Home Assistant n'est pas configuré. Configurez-le dans`,haSettingsPath:`Paramètres → Réseau → Home Assistant`,selectEntity:`Sélectionner l'entité *`,ipAddress:`Adresse IP *`,nameLabel:`Nom *`,username:`Nom d'utilisateur`,password:`Mot de passe`,authHint:`Laissez vide si votre appareil Tasmota ne nécessite pas d'authentification`,linkToPrinter:`Lier à l'imprimante`,noPrinter:`Pas d'imprimante (contrôle manuel uniquement)`,linkingDescription:`La liaison permet l'allumage/extinction automatique au début/fin de l'impression`,powerAlerts:`Alertes de puissance`,alertAbove:`Alerte si au-dessus (W)`,alertBelow:`Alerte si en dessous (W)`,alertDescription:`Recevoir une notification lorsque la consommation dépasse ces seuils. Laisser vide pour désactiver cette direction.`,dailySchedule:`Planification quotidienne`,turnOnAt:`Allumer à`,turnOffAt:`Éteindre à`,scheduleDescription:`Allumer/éteindre automatiquement la prise à ces heures chaque jour. Laisser vide pour ignorer cette action.`,showOnPrinterCard:`Afficher sur la carte imprimante`,displayOnPrinterCard:`Afficher le bouton sur la carte imprimante`,connectedResult:`Connecté !`,deviceLabel:`Appareil : {{name}} - `,stateLabel:`État : {{state}}`,test:`Tester`,delete:`Supprimer`,save:`Enregistrer`,add:`Ajouter`,cancel:`Annuler`,failedToStartScan:`Impossible de démarrer le scan`,nameRequired:`Le nom est requis`,entityRequired:`L'entité est requise pour les prises Home Assistant`,mqttTopicRequired:`Au moins un topic MQTT doit être configuré pour la puissance, l'énergie ou la surveillance d'état`,loadingEntities:`Chargement des entités...`,loading:`Chargement...`,failedToLoadEntities:`Échec du chargement des entités : {{error}}`,noEntitiesMatching:`Aucune entité trouvée correspondant à "{{search}}"`,noEntitiesAvailable:`Aucune entité disponible`,searchingEntities:`Recherche de toutes les entités ({{count}} trouvées)`,showingEntities:`Affichage switch, light, input_boolean ({{count}} disponibles)`,energyMonitoringOptional:`Surveillance énergétique (Optionnel)`,energyMonitoringHint:`Recherchez et sélectionnez les capteurs fournissant des données de puissance/énergie.`,powerSensorW:`Capteur de puissance (W)`,energyTodayKwh:`Énergie aujourd'hui (kWh)`,totalEnergyKwh:`Énergie totale (kWh)`,noMatchingSensors:`Aucun capteur correspondant`,none:`Aucun`,mqttNotConfigured:`Broker MQTT non configuré. Définissez l'adresse du broker dans`,mqttSettingsPath:`Paramètres → Réseau → Publication MQTT`,mqttNotConfiguredSuffix:`(vous n'avez pas besoin d'activer la publication, remplissez simplement les détails du broker).`,mqttMonitorOnlyDescription:`Les prises MQTT reçoivent les données de puissance/énergie via un abonnement MQTT. Le contrôle on/off n'est pas disponible - utilisez votre broker MQTT ou système domotique.`,powerMonitoring:`Surveillance de puissance`,energyMonitoring:`Surveillance énergétique`,stateMonitoring:`Surveillance d'état`,optional:`optionnel`,topic:`Sujet`,jsonPath:`Chemin JSON`,multiplier:`Multiplicateur`,onValue:`Valeur ON`,mqttPowerHint:`Le chemin JSON extrait la valeur du payload JSON (ex: "power_l1"). Laisser vide si le topic publie des valeurs numériques brutes.
+Valor de ON: la cadena exacta que significa «ON». Déjelo vacío para la detección automática (ON, true, 1).`,restControl:`Control`,restOnUrl:`URL de encendido`,restOffUrl:`URL de apagado`,restOnBody:`Cuerpo de la solicitud de encendido`,restOffBody:`Cuerpo de la solicitud de apagado`,restMethod:`Método HTTP`,restHeaders:`Cabeceras personalizadas (JSON)`,restStatusUrl:`URL de estado`,restStatusPath:`Ruta JSON del estado`,restStatusOnValue:`Valor de ON`,restPowerUrl:`URL de potencia`,restPowerPath:`Ruta JSON de la potencia`,restPowerMultiplier:`Multiplicador de potencia`,restEnergyUrl:`URL de energía`,restEnergyPath:`Ruta JSON de energía (hoy)`,restEnergyTotalPath:`Ruta JSON de energía (contador total)`,restEnergyTotalMultiplier:`Multiplicador del contador total`,restEnergyTotalPathHint:`p. ej. aenergy.total`,restEnergyTotalHint:`Muchos enchufes — todos los Shelly entre ellos — solo informan de un contador acumulado que nunca se reinicia. Va aquí, no en el campo de arriba: leído como el consumo de hoy nunca se pondría a cero a medianoche, y Ayer y Total seguirían vacíos. Bambuddy deduce Hoy y Ayer a partir de él, lo que requiere uno o dos días de lecturas. Un Shelly informa en vatios-hora, así que usa un multiplicador de 0.001.`,restEnergyMultiplier:`Multiplicador de energía`,restUrlRequired:`Se requiere al menos una URL (de encendido o apagado) para los enchufes REST`,restHeadersHint:`p. ej. {"Authorization": "Bearer your-token"}`,restBodyHint:`p. ej. ON, {"state": "on"}`,restStatusHint:`URL para sondear el estado actual`,restPathHint:`p. ej. state o data.power.status`,restPowerUrlHint:`URL independiente para los datos de potencia (usa la URL de estado si está vacía)`,restEnergyUrlHint:`URL independiente para los datos de energía (usa la URL de estado si está vacía)`,restEnergyHint:`Cada valor puede usar su propia URL o recurrir a la URL de estado. Use multiplicadores para la conversión de unidades (p. ej. 0,001 para convertir Wh en kWh).`,testConnection:`Probar conexión`,connectionSuccess:`Conexión correcta`,noSwitchesInSwitchbar:`No hay interruptores en la barra de interruptores`,enableSwitchbarHint:`Active «Mostrar en la barra de interruptores» en Ajustes > Enchufes inteligentes`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`Correo`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`Notificaciones por correo SMTP`,telegram:`Notificaciones mediante un bot de Telegram`,discord:`Enviar a un canal de Discord mediante un webhook`,ntfy:`Notificaciones push gratuitas y autoalojables`,pushover:`Notificaciones push sencillas y fiables`,callmebot:`Notificaciones de WhatsApp gratuitas mediante CallMeBot`,webhook:`POST HTTP genérico a cualquier URL`,homeassistant:`Notificaciones persistentes en el panel de Home Assistant`,bark:`Notificaciones push de iOS mediante Bark (autoalojable)`},lastSuccess:`Última: {{date}}`,error:`Error`,printer:`Impresora:`,allPrinters:`Todas las impresoras`,sendTestNotification:`Enviar notificación de prueba`,eventSettings:`Ajustes de eventos`,enabled:`Activado`,sendFromProvider:`Enviar notificaciones desde este proveedor`,printEvents:`Eventos de impresión`,printerStatus:`Estado de la impresora`,amsAlarms:`Alarmas del AMS`,amsHtAlarms:`Alarmas del AMS-HT`,printQueue:`Cola de impresión`,start:`Inicio`,plateCheck:`Comprobación de cama`,complete:`Completada`,failed:`Fallida`,stopped:`Detenida`,progress:`Progreso`,offline:`Desconectada`,lowFilament:`Filamento bajo`,maintenance:`Mantenimiento`,amsHumidity:`Humedad del AMS`,amsTemp:`Temp. del AMS`,amsDryingSuspended:`Secado suspendido`,amsHtHumidity:`Humedad del AMS-HT`,amsHtTemp:`Temp. del AMS-HT`,bedCooled:`Cama enfriada`,firstLayer:`Primera capa`,quiet:`Silencio`,digest:`Resumen {{time}}`,printStarted:`Impresión iniciada`,plateNotEmpty:`Cama no vacía`,plateNotEmptyDescription:`Objetos detectados antes de la impresión`,plateClearRequired:`Confirmar cama libre`,plateClearRequiredDescription:`Impresión terminada, la cola espera confirmación`,plateClear:`Cama libre`,printCompleted:`Impresión completada`,bedCooledLabel:`Cama enfriada`,bedCooledDescription:`La cama se enfrió por debajo del umbral tras la impresión`,firstLayerCompleteLabel:`Primera capa completada`,firstLayerCompleteDescription:`Notificar con una captura cuando termina la primera capa`,missingSpoolAssignmentLabel:`Falta la asignación de bobina`,billingChargeFailedLabel:`Error de facturación`,billingChargeFailedDescription:`Notificar cuando no se puedan registrar los costes de impresión`,missingSpoolAssignmentDescription:`Notificar cuando la impresión comienza y las bandejas necesarias no tienen ninguna bobina asignada`,printFailed:`Impresión fallida`,printStopped:`Impresión detenida`,progressMilestones:`Hitos de progreso`,progressMilestonesDescription:`Notificar al 25%, 50% y 75%`,printerOffline:`Impresora desconectada`,printerError:`Error de la impresora`,aiFailureDetection:`Detección de fallos por IA`,aiFailureDetectionDescription:`Notificar cuando la IA de Obico detecte un posible fallo de impresión`,lowFilamentLabel:`Filamento bajo`,maintenanceDue:`Mantenimiento pendiente`,maintenanceDueDescription:`Notificar cuando se necesite mantenimiento`,amsHumidityHigh:`Humedad alta del AMS`,amsHumidityHighDescription:`La humedad del AMS normal supera el umbral`,amsTemperatureHigh:`Temperatura alta del AMS`,amsTemperatureHighDescription:`La temperatura del AMS normal supera el umbral`,amsDryingSuspendedTitle:`Secado automático suspendido`,amsDryingSuspendedDescription:`El secado automático se rindió con una unidad AMS porque la humedad nunca bajó del umbral`,amsHtHumidityHigh:`Humedad alta del AMS-HT`,amsHtHumidityHighDescription:`La humedad del AMS-HT supera el umbral`,amsHtTemperatureHigh:`Temperatura alta del AMS-HT`,amsHtTemperatureHighDescription:`La temperatura del AMS-HT supera el umbral`,inventoryAlerts:`Alertas de inventario`,stockReorderAlert:`Alerta de reabastecimiento`,stockReorderAlertDescription:`El SKU ha alcanzado su punto de reabastecimiento`,stockBreakAlert:`Alerta de rotura de existencias`,stockBreakAlertDescription:`Las existencias se agotarán antes de que llegue el reabastecimiento`,jobAdded:`Trabajo añadido`,jobAddedDescription:`Trabajo añadido a la cola`,jobAssigned:`Trabajo asignado`,jobAssignedDescription:`Trabajo basado en el modelo asignado a una impresora`,jobStarted:`Trabajo iniciado`,jobStartedDescription:`El trabajo de la cola empezó a imprimirse`,jobWaiting:`Trabajo en espera`,jobWaitingDescription:`Trabajo a la espera de filamento o impresora`,jobSkipped:`Trabajo omitido`,jobSkippedDescription:`Trabajo omitido (el anterior falló)`,jobFailed:`Trabajo fallido`,jobFailedDescription:`El trabajo no pudo iniciarse`,queueComplete:`Cola completada`,queueCompleteDescription:`Todos los trabajos de la cola han terminado`,quietHours:`Horas de silencio`,noNotificationsDuring:`No hay notificaciones durante estas horas`,editProviderToChangeQuietHours:`Edite el proveedor para cambiar las horas de silencio`,dailyDigest:`Resumen diario`,batchNotifications:`Agrupar las notificaciones en un único resumen diario`,sendAt:`Enviar a las {{time}}`,editProviderToChangeDigestTime:`Edite el proveedor para cambiar la hora del resumen`,edit:`Editar`,deleteProvider:`Eliminar proveedor de notificaciones`,deleteConfirm:`¿Está seguro de que desea eliminar "{{name}}"? Esto no se puede deshacer.`,delete:`Eliminar`,addTitle:`Añadir proveedor de notificaciones`,editTitle:`Editar proveedor de notificaciones`,nameLabel:`Nombre *`,namePlaceholder:`Mis notificaciones`,providerTypeLabel:`Tipo de proveedor *`,configuration:`Configuración`,testConfiguration:`Probar configuración`,printerFilter:`Filtro de impresora`,onlyFromPrinter:`Enviar notificaciones solo para los eventos de esta impresora`,quietHoursDnd:`Horas de silencio (no molestar)`,quietStart:`Inicio`,quietEnd:`Fin`,dailyDigestLabel:`Resumen diario`,sendDigestAt:`Enviar el resumen a las`,digestCollected:`Los eventos se recopilarán y se enviarán como un único resumen a esta hora`,notificationEvents:`Eventos de notificación`,progressPercent:`(25%, 50%, 75%)`,bedCooledAfterPrint:`(después de completar la impresión)`,haSensorAlert:`Alerta de sensor de impresora`,haSensorAlertDescription:`(un sensor de Home Assistant vinculado requiere atención)`,locationHaSensorAlert:`Alerta de sensor de ubicación`,locationHaSensorAlertDescription:`(un sensor de Home Assistant vinculado a una ubicación de almacenamiento requiere atención)`,eventPriority:{sectionTitle:`Prioridad de ntfy`,helpNtfy:`Elija una prioridad para cada evento activado. ntfy las usa para escalar las alertas (sonido, visibilidad, comportamiento de las notificaciones push). Los niveles no establecidos aquí usan el valor predeterminado del servidor ntfy.`,min:`Mínima`,low:`Baja`,default:`Predeterminada`,high:`Alta`,urgent:`Urgente`},cancel:`Cancelar`,save:`Guardar`,add:`Añadir`,nameRequired:`El nombre es obligatorio`,fieldRequired:`{{field}} es obligatorio`,haDataInvalid:`El campo Data debe ser un objeto JSON válido, p. ej. {"priority": "high", "ttl": 0}`,phoneNumber:`Número de teléfono`,apiKey:`Clave API`,serverUrl:`URL del servidor`,topic:`Tema`,authToken:`Token de autenticación`,userKey:`Clave de usuario`,appToken:`Token de la aplicación`,priority:`Prioridad`,pushoverRetry:`Reintento de emergencia (s)`,pushoverExpire:`Expiración de emergencia (s)`,botToken:`Token del bot`,chatId:`ID del chat`,telegramThreadId:`ID del tema del foro`,telegramThreadIdHelp:`Opcional. Envía a un único tema de un grupo de foro: el último número del enlace del tema (t.me/c/.../25). Déjalo vacío para el tema General.`,telegramThreadIdInvalid:`El ID del tema del foro debe ser un número.`,smtpServer:`Servidor SMTP`,smtpPort:`Puerto SMTP`,security:`Seguridad`,authentication:`Autenticación`,username:`Nombre de usuario`,password:`Contraseña`,fromEmail:`Correo del remitente`,toEmail:`Correo del destinatario`,webhookUrl:`URL del webhook`,payloadFormat:`Formato de la carga útil`,authorization:`Autorización`,titleFieldName:`Nombre del campo del título`,messageFieldName:`Nombre del campo del mensaje`,editTemplate:`Editar plantilla: {{name}}`,titleLabel:`Título`,bodyLabel:`Cuerpo`,titlePlaceholder:`Título de la notificación...`,bodyPlaceholder:`Cuerpo de la notificación...`,availableVariables:`Variables disponibles`,clickToInsert:`Haga clic para insertar en la posición del cursor en el cuerpo`,livePreview:`Vista previa en directo`,hide:`Ocultar`,show:`Mostrar`,loadingPreview:`Cargando la vista previa...`,enterTemplateContent:`Introduzca el contenido de la plantilla para ver la vista previa`,titlePreview:`Título:`,bodyPreview:`Cuerpo:`,resetToDefault:`Restablecer al valor predeterminado`,titleRequired:`El título es obligatorio`,bodyRequired:`El cuerpo es obligatorio`,notificationLog:`Registro de notificaciones`,showFailedOnly:`Solo fallidas`,last24Hours:`Últimas 24 horas`,last7Days:`Últimos 7 días`,last30Days:`Últimos 30 días`,last90Days:`Últimos 90 días`,justNow:`Ahora mismo`,noFailedNotifications:`No hay notificaciones fallidas`,noNotificationsLogged:`No hay notificaciones registradas`,unknownProvider:`Proveedor desconocido`,logTitle:`Título`,logMessage:`Mensaje`,logError:`Error`,logProvider:`Proveedor: {{type}}`,logTime:`Hora: {{time}}`,refresh:`Actualizar`,clearOld:`Borrar antiguas`,statsSummary:`Últimos {{days}} días:`,statsNotifications:`notificaciones`,statsSent:`{{count}} enviadas`,statsFailed:`{{count}} fallidas`,eventTypes:{print_start:`Impresión iniciada`,print_complete:`Impresión completada`,print_failed:`Impresión fallida`,print_stopped:`Impresión detenida`,print_progress:`Progreso`,printer_offline:`Impresora desconectada`,printer_error:`Error de la impresora`,filament_low:`Filamento bajo`,maintenance_due:`Mantenimiento pendiente`,test:`Prueba`},userEmail:{title:`Notificaciones`,emailNotifications:`Notificaciones por correo`,emailNotificationsDesc:`Reciba notificaciones por correo de sus propios trabajos de impresión. Los correos se envían usando los ajustes de SMTP del sistema configurados en la autenticación avanzada.`,sendingTo:`Las notificaciones se enviarán a`,noEmailWarning:`Su cuenta no tiene una dirección de correo. Póngase en contacto con un administrador para añadir una.`,printJobNotifications:`Notificaciones de trabajos de impresión`,printJobNotificationsDesc:`Elija qué eventos activan las notificaciones por correo para los trabajos de impresión que envíe.`,printJobStarts:`El trabajo de impresión comienza`,printJobStartsDesc:`Reciba una notificación cuando su trabajo de impresión comience.`,printJobFinishes:`El trabajo de impresión termina`,printJobFinishesDesc:`Reciba una notificación cuando su trabajo de impresión se complete correctamente.`,printErrors:`Errores de impresión`,printErrorsDesc:`Reciba una notificación cuando su trabajo de impresión falle o encuentre un error.`,printJobStops:`El trabajo de impresión se detiene`,printJobStopsDesc:`Reciba una notificación cuando su trabajo de impresión se cancele o se detenga.`,saveSuccess:`Preferencias de notificación guardadas.`,saveError:`Error al guardar las preferencias de notificación.`}},richTextEditor:{bold:`Negrita`,italic:`Cursiva`,underline:`Subrayado`,bulletList:`Lista con viñetas`,numberedList:`Lista numerada`,alignLeft:`Alinear a la izquierda`,alignCenter:`Centrar`,alignRight:`Alinear a la derecha`,addLink:`Añadir enlace`,removeLink:`Quitar enlace`},externalLinks:{title:`Enlaces de la barra lateral`,sidebarLayout:`Barra lateral`,sidebarLayoutDescription:`Muestra u oculta páginas integradas, añade enlaces externos y arrastra elementos para reordenar la navegación lateral.`,systemPages:`Páginas de Bambuddy`,externalLinks:`Enlaces externos`,visibleInSidebar:`Visible en la barra lateral`,hiddenFromSidebar:`Oculto en la barra lateral`,requiredInSidebar:`Obligatorio en la barra lateral`,hidePage:`Ocultar página`,showPage:`Mostrar página`,settingsCannotBeHidden:`Ajustes no se puede ocultar`,noLinksConfigured:`No hay enlaces externos configurados`,deleteLink:`Eliminar enlace`,removeCustomIcon:`Quitar el icono personalizado`,openInNewTab:`Abrir en una pestaña nueva`,placeholders:{linkName:`Mi enlace`}},keyboardShortcuts:{title:`Atajos de teclado`,navigation:`Navegación`,archivesSection:`Archivos`,kProfilesSection:`Perfiles K`,generalSection:`General`,shortcuts:{goToPrinters:`Ir a Impresoras`,goToArchives:`Ir a Archivos`,goToQueue:`Ir a la cola`,goToStats:`Ir a Estadísticas`,goToProfiles:`Ir a Perfiles en la nube`,goToSettings:`Ir a Ajustes`,focusSearch:`Enfocar la búsqueda`,openUploadModal:`Abrir la ventana de subida`,clearSelection:`Borrar la selección / quitar el foco del campo`,contextMenu:`Menú contextual en las tarjetas`,refreshProfiles:`Actualizar perfiles`,newProfile:`Nuevo perfil`,exitSelectionMode:`Salir del modo de selección`,showHelp:`Mostrar esta ayuda`},footer:`Pulse Esc o haga clic fuera para cerrar`},notificationLog:{title:`Registro de notificaciones`,events:{printStarted:`Impresión iniciada`,printComplete:`Impresión completada`,printFailed:`Impresión fallida`,printStopped:`Impresión detenida`,progress:`Progreso`,printerOffline:`Impresora desconectada`,printerError:`Error de la impresora`,lowFilament:`Filamento bajo`,maintenanceDue:`Mantenimiento pendiente`,test:`Prueba`},timeAgo:{justNow:`Ahora mismo`,minutesAgo:`hace {{minutes}} min`,hoursAgo:`hace {{hours}} h`}},restoreBackup:{title:`Restaurar copia de seguridad`,restoring:`Restaurando...`,restoreComplete:`Restauración completada`,restoreFailed:`Error en la restauración`,importSettings:`Importar ajustes desde un archivo de copia de seguridad`,pleaseWait:`Espere mientras se restauran sus datos`,clickToSelect:`Haga clic para seleccionar el archivo de copia de seguridad (.json o .zip)`,howDuplicateHandling:`Cómo funciona la gestión de duplicados:`,categories:{printers:`Impresoras`,smartPlugs:`Enchufes inteligentes`,notificationProviders:`Proveedores de notificaciones`,filaments:`Filamentos`,archives:`Archivos`,pendingUploads:`Subidas pendientes`,settingsTemplates:`Ajustes y plantillas`},matchingInfo:{printers:`coincidencia por número de serie`,smartPlugs:`coincidencia por dirección IP`,notificationProviders:`coincidencia por nombre`,filaments:`coincidencia por nombre + tipo + marca`,archives:`coincidencia por hash del contenido`,pendingUploads:`coincidencia por nombre de archivo`,settingsTemplates:`siempre se sobrescriben`},replaceExisting:`Reemplazar los datos existentes`,keepExisting:`Conservar los datos existentes`,replaceDescription:`Sobrescribir los elementos que ya existen con los datos de la copia de seguridad`,keepDescription:`Restaurar solo los elementos que aún no existen`,caution:`Precaución:`,cautionText:`Sobrescribir reemplazará sus configuraciones actuales con los datos de la copia de seguridad. Los códigos de acceso de las impresoras nunca se sobrescriben por seguridad.`,itemsRestored:`Elementos restaurados`,itemsSkipped:`Elementos omitidos`,restored:`Restaurados`,skipped:`Omitidos (ya existen)`,filesLabel:`Archivos (3MF, miniaturas, etc.)`,newApiKeysGenerated:`Nuevas claves API generadas`,newApiKeysWarning:`Estas claves solo se muestran una vez. ¡Cópielas ahora!`,processingBackup:`Procesando el archivo de copia de seguridad...`,noDataFound:`No se encontraron datos para restaurar en el archivo de copia de seguridad.`,failedToRestore:`Error al restaurar la copia de seguridad. Compruebe el formato del archivo.`},backupExport:{title:`Exportar copia de seguridad`,selectData:`Seleccione los datos que incluir`,selectAll:`Seleccionar todo`,selectNone:`No seleccionar nada`,categoryDescriptions:{settings:`Idioma, tema, preferencias de actualización`,notifications:`ntfy, Pushover, Discord, etc.`,templates:`Plantillas de mensajes personalizadas`,smartPlugs:`Configuraciones de enchufes Tasmota`,externalLinks:`Enlaces de la barra lateral a servicios externos`,printers:`Información de las impresoras (códigos de acceso excluidos)`,plateDetection:`Imágenes de referencia de la cama vacía`,filaments:`Tipos y costes de filamento`,maintenance:`Programaciones de mantenimiento personalizadas`,archives:`Todos los datos de impresión + archivos (3MF, miniaturas, fotos)`,projects:`Proyectos, elementos de la lista de materiales y adjuntos`,pendingUploads:`Subidas de la impresora virtual pendientes de revisión`,apiKeys:`Claves API de webhook (se generan claves nuevas al importar)`},requiresPrinters:`Requiere que se seleccionen las impresoras`,zipFileWarning:`Se creará un archivo ZIP.`,zipFileDescription:`Incluye todos los archivos 3MF, las miniaturas, los time-lapses y las fotos. Esto puede tardar un rato y dar como resultado un archivo grande.`,includeAccessCodes:`Incluir los códigos de acceso`,includeAccessCodesDescription:`Para transferir a otra máquina`,includeAccessCodesWarning:`Los códigos de acceso se incluirán en texto plano. ¡Mantenga este archivo de copia de seguridad seguro!`,categoriesSelected:`{{selectedCount}} categorías seleccionadas`},pendingUploads:{placeholders:{notes:`Añada notas sobre esta impresión...`},discardUpload:`Descartar subida`,archiveAllUploads:`Archivar todas las subidas`,discardAllUploads:`Descartar todas las subidas`,archive:`Archivar`,timeAgo:{justNow:`Ahora mismo`,minutesAgo:`hace {{minutes}} min`,hoursAgo:`hace {{hours}} h`,daysAgo:`hace {{days}} d`}},apiBrowser:{placeholders:{requestBody:`Cuerpo de la solicitud JSON...`,searchEndpoints:`Buscar puntos de conexión...`}},configureAmsSlot:{title:`Configurar la ranura del AMS`,slotConfigured:`¡Ranura configurada!`,configuringSlot:`Configurando la ranura:`,slotLabel:`{{ams}} Ranura {{slot}}`,searchPresets:`Buscar preajustes...`,colorPlaceholder:`Nombre del color o hexadecimal (p. ej., marrón, FF8800)`,clearCustomColor:`Borrar el color personalizado`,noCloudPresets:`No hay preajustes de la nube. Inicie sesión en Bambu Cloud para sincronizar.`,noPresetsAvailable:`No hay preajustes disponibles. Inicie sesión en Bambu Cloud o importe perfiles locales.`,noMatchingPresets:`No se encontraron preajustes coincidentes.`,custom:`Personalizado`,builtin:`Integrado`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Ajustes enviados a la impresora`,filamentProfile:`Perfil de filamento`,kProfileLabel:`Perfil K (avance de presión)`,filteringFor:`Filtrando por: {{material}}`,noKProfile:`Sin perfil K (usar el predeterminado 0,020)`,noMatchingKProfiles:`No se encontraron perfiles K coincidentes. Se usará el K=0,020 predeterminado.`,otherKProfiles:`Otros perfiles K en esta impresora`,selectFilamentFirst:`Seleccione primero un perfil de filamento`,kFromCalibration:`K={{value}} de la calibración de la impresora`,customColorLabel:`Color personalizado (opcional)`,presetColors:`Colores de {{name}}:`,showLessColors:`Mostrar menos colores`,showMoreColors:`Mostrar más colores`,clear:`Borrar`,hexLabel:`Hex: #{{hex}}`,resetting:`Restableciendo...`,resetSlot:`Restablecer ranura`,cancel:`Cancelar`,configuring:`Configurando...`,configureSlot:`Configurar ranura`},githubBackup:{title:`Copia de seguridad en Git`,history:`Historial`,downloadBackup:`Descargar copia de seguridad`,restoreBackup:`Restaurar copia de seguridad`,noBackupsYet:`Aún no hay copias de seguridad`},emailSettings:{placeholders:{fromName:`BamBuddy`}},tagManagement:{searchTags:`Buscar etiquetas...`,renameTag:`Renombrar etiqueta`,deleteTag:`Eliminar etiqueta`},notificationTemplates:{placeholders:{title:`Título de la notificación...`,body:`Cuerpo de la notificación...`}},batchTag:{placeholders:{newTag:`Introduzca una nueva etiqueta...`}},photoGallery:{deletePhoto:`Eliminar foto`},filamentHoverCard:{copySpoolUuid:`Copiar el UUID de la bobina`},kProfilesView:{hasNote:`Tiene nota`,copyProfile:`Copiar perfil`},layout:{openMenu:`Abrir menú`,noPermissionSystemInfo:`No tiene permiso para ver la información del sistema`},dashboard:{dragToReorder:`Arrastre para reordenar`,hideWidget:`Ocultar widget`},notificationProviderCard:{deleteNotificationProvider:`Eliminar proveedor de notificaciones`},fileManagerModal:{closeFileManager:`Cerrar el gestor de archivos`,sortFiles:`Ordenar archivos`,goToParentFolder:`Ir a la carpeta superior`,threeView:`Vista 3D`},embeddedCameraViewer:{refreshStream:`Actualizar la transmisión`,close:`Cerrar`,zoomOut:`Alejar`,resetZoom:`Restablecer el zoom`,zoomIn:`Acercar`,dragToResize:`Arrastre para redimensionar`},timelapseViewer:{skipBack5s:`Retroceder 5 s`,skipForward5s:`Avanzar 5 s`},notificationProviders:{descriptions:{email:`Notificaciones por correo SMTP`,telegram:`Notificaciones mediante un bot de Telegram`,discord:`Enviar a un canal de Discord mediante un webhook`,ntfy:`Notificaciones push gratuitas y autoalojables`,pushover:`Notificaciones push sencillas y fiables`,callmebot:`Notificaciones de WhatsApp gratuitas mediante CallMeBot`,webhook:`POST HTTP genérico a cualquier URL`}},logViewer:{searchPlaceholder:`Buscar mensaje o nombre del registrador...`,noLogEntries:`No se encontraron entradas de registro`},switchbarPopover:{noSwitchesInSwitchbar:`No hay interruptores en la barra de interruptores`},projectPageModal:{placeholders:{title:`Título`,designer:`Diseñador`,license:`Licencia`,description:`Introduzca una descripción...`,profileTitle:`Título del perfil`,profileDescription:`Descripción del perfil...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`En espera`,justNow:`Ahora mismo`,now:`Ahora`,minsAgo:`hace {{count}} min`,inMins:`en {{count}} min`,hoursAgo:`hace {{count}} h`,inHours:`en {{count}} h`,daysAgo:`hace {{count}} d`,inDays:`en {{count}} d`},spoolbuddy:{nav:{dashboard:`Panel`,ams:`AMS`,inventory:`Inventario`,writeTag:`Escribir`,settings:`Ajustes`},status:{nfcReady:`NFC listo`,nfcOff:`NFC apagado`,offline:`Desconectado`,online:`En línea`,noPrinters:`No hay impresoras`,deviceOffline:`Dispositivo desconectado`,waitingConnection:`Esperando la conexión del dispositivo...`,systemReady:`Sistema listo`,status:`Estado`},dashboard:{readyToScan:`Listo para escanear`,idleMessage:`Coloque una bobina en la báscula para identificarla`,nfcHint:`La etiqueta NFC se leerá automáticamente`,device:`Dispositivo`,syncWeight:`Sincronizar peso`,weightSynced:`¡Sincronizado!`,unknownTag:`Etiqueta desconocida`,newTag:`Nueva etiqueta detectada`,onScale:`en la báscula`,linkSpool:`Vincular a bobina`,linkTagTitle:`Vincular la etiqueta a una bobina`,linkTag:`Vincular etiqueta`,selectSpool:`Seleccione una bobina a la que vincular esta etiqueta:`,noUntagged:`No se encontraron bobinas sin etiquetas`,tagDetected:`Etiqueta detectada`,noTag:`Sin etiqueta`,tagId:`Etiqueta`,grossWeight:`Peso bruto`,spoolSize:`Tamaño de la bobina`,close:`Cerrar`,currentSpool:`Bobina actual`,plateReady:`Cama lista: {{name}}`,plateReadyLabel:`Camas listas para despejar`,plateClearAction:`Despejar`,plateClearedToast:`Cama marcada como despejada`,plateClearFailed:`No se pudo marcar la cama como despejada`},modal:{spoolDetected:`Bobina detectada`,assignToAms:`Asignar al AMS`,syncWeight:`Sincronizar peso`,weightSynced:`¡Sincronizado!`,syncing:`Sincronizando...`,newTagDetected:`Nueva etiqueta detectada`,addToInventory:`Añadir al inventario`,assignToAmsTitle:`Asignar al AMS`,selectSlot:`Seleccione una ranura`,assign:`Asignar`,assigning:`Asignando...`,assignSuccess:`¡Asignada!`,assignPendingInsert:`Asignada. La ranura se configurará cuando inserte la bobina.`,assignError:`Error al asignar la bobina. Inténtelo de nuevo.`,noPrinterSelected:`Seleccionar una impresora...`,noAmsDetected:`No se detectó ningún AMS en esta impresora`,slot:`Ranura`},weight:{noReading:`Sin lectura`,stable:`Estable`,measuring:`Midiendo...`,tare:`Tara`,calibrate:`Calibrar`},spool:{remaining:`Restante`,material:`Material`,brand:`Marca`,color:`Color`,coreWeight:`Núcleo`,labelWeight:`Etiqueta`,scaleWeight:`Báscula`,netWeight:`Neto`,lastUsed:`Usada por última vez`,unknownColor:`Color desconocido`},ams:{noData:`No se detectó ningún AMS`,connectAms:`Conecte un AMS para ver las ranuras de filamento`,noPrinter:`No hay impresora seleccionada`,selectPrinter:`Seleccione una impresora en la barra superior`,printerDisconnected:`Impresora desconectada`,humidity:`Humedad`,level:`Nivel`,active:`Activa`,slot:`Ranura`,empty:`Vacía`},inventory:{search:`Buscar bobinas...`,empty:`No hay bobinas en el inventario`,noResults:`No hay bobinas coincidentes`,spools:`bobinas`,addSpool:`Añadir bobina`},settings:{tabDevice:`Dispositivo`,tabDisplay:`Pantalla`,tabScale:`Báscula`,tabUpdates:`Actualizaciones`,nfcReader:`Lector NFC`,type:`Tipo`,connection:`Conexión`,notConnected:`N/D`,deviceInfo:`Información del dispositivo`,hostname:`Host`,uptime:`Tiempo de actividad`,systemConfig:`Backend y autenticación`,backendUrl:`URL del backend de Bambuddy`,apiToken:`Token de API`,apiTokenPlaceholder:`Introduzca el token de API`,saveConfig:`Guardar configuración`,systemQueued:`Configuración encolada.`,nfcDiagnostic:`Diagnóstico de NFC`,scaleDiagnostic:`Diagnóstico de la báscula`,readTagDiagnostic:`Diagnóstico de lectura de etiqueta`,testNfc:`Probar el lector`,testScale:`Probar la precisión`,testReadTag:`Leer etiqueta`,systemFieldsRequired:`La URL del backend es obligatoria.`,brightness:`Brillo`,saved:`Guardado`,noBacklight:`No se detectó retroiluminación DSI. El control del brillo requiere una pantalla DSI.`,screenBlank:`Tiempo de espera para apagar la pantalla`,screenBlankDesc:`La pantalla se apaga tras la inactividad. Toque para activarla.`,displayNote:`El brillo se aplica como un filtro de software.`,scaleCalibration:`Calibración de la báscula`,currentWeight:`Peso actual`,tareOffset:`Tara`,calFactor:`Factor`,knownWeight:`Peso conocido`,calStep1:`Retire todos los elementos de la báscula y pulse Poner a cero.`,calStep2:`Coloque el peso conocido en la báscula.`,setZero:`Poner a cero`,calibrateNow:`Calibrar`,calibrated:`Calibrada`,tareSet:`Comando de tara enviado. Esperando al dispositivo...`,tareComplete:`¡Tara completada!`,tareTimedOut:`Tara agotó el tiempo de espera — ¿está activo el daemon de SpoolBuddy?`,tareFailed:`Error al enviar el comando de tara`,zeroSet:`Punto cero establecido. Coloque el peso conocido en la báscula.`,calibrationDone:`¡Calibración completada!`,calibrationFailed:`Error en la calibración`,lastCalibrated:`Calibrada por última vez`,stable:`Estable`,settling:`Estabilizando...`,firmware:`Firmware`,scale:`Báscula`,noDevice:`No se encontró ningún dispositivo SpoolBuddy`,daemonVersion:`Versión del demonio`,currentVersion:`Actual`,versionPending:`Esperando al demonio...`,checking:`Comprobando...`,checkUpdates:`Buscar actualizaciones`,updateAvailable:`Actualización disponible`,updateInstructions:`Actualice mediante SSH: ejecute el script de instalación de SpoolBuddy para actualizar.`,upToDate:`Actualizado`,includeBeta:`Incluir versiones beta`},writeTag:{tabExisting:`Bobina existente`,tabNew:`Bobina nueva`,tabReplace:`Reemplazar etiqueta`,searchPlaceholder:`Buscar por material, color, marca...`,noUntaggedSpools:`No hay bobinas sin etiquetas`,noTaggedSpools:`No hay bobinas con etiquetas`,selectSpool:`Seleccione una bobina y luego coloque una etiqueta NTAG en blanco en el lector`,placeTag:`Coloque una etiqueta NTAG en el lector`,tagReady:`Etiqueta detectada — lista para escribir`,writeTag:`Escribir etiqueta`,replaceTag:`Reemplazar etiqueta`,writing:`Escribiendo la etiqueta...`,waiting:`Esperando a SpoolBuddy...`,writeSuccess:`¡Etiqueta escrita correctamente!`,writeFailed:`Error al escribir`,queueFailed:`Error al encolar el comando de escritura`,tryAgain:`Inténtelo de nuevo`,cancel:`Cancelar`,replaceWarning:`La etiqueta antigua se desvinculará. La nueva etiqueta la reemplazará.`,deviceOffline:`SpoolBuddy está desconectado`,material:`Material`,colorName:`Nombre del color`,color:`Color`,brand:`Marca`,weight:`Peso (g)`,createSpool:`Crear bobina`,creating:`Creando...`,spoolCreated:`¡Bobina creada! Lista para escribir.`,createFailed:`Error al crear la bobina`,incompleteDataWarning:`Etiqueta escrita con datos de Spoolman incompletos`},quickMenu:{printerPower:`Alimentación de la impresora`,systemControls:`Sistema`,restartDaemon:`Reiniciar demonio`,restartBrowser:`Reiniciar navegador`,reboot:`Reiniciar`,shutdown:`Apagar`,swipeToClose:`Deslice hacia abajo para cerrar`,confirmTitle:`Confirmar`,confirmShutdown:`¿Está seguro de que desea apagar el SpoolBuddy? Necesitará acceso físico para volver a encenderlo.`,confirmReboot:`¿Está seguro de que desea reiniciar el SpoolBuddy?`,confirmRestartDaemon:`¿Reiniciar el demonio de SpoolBuddy? El NFC y la báscula no estarán disponibles temporalmente.`,confirmRestartBrowser:`¿Reiniciar el navegador del quiosco? La pantalla se quedará en negro brevemente.`,confirm:`Confirmar`,confirmPlugOn:`¿Encender {{name}}?`,confirmPlugOff:`¿Apagar {{name}}?`,turnOn:`Encender`,turnOff:`Apagar`}},diagnostic:{modalTitle:`Diagnóstico de conexión — {{name}}`,running:`Ejecutando el diagnóstico...`,runningElapsed:`Ejecutando el diagnóstico... ({{elapsed}}s)`,waitingForReportHint:`Esperando a que la impresora publique un informe de estado — puede tardar hasta {{max}} segundos.`,runFailed:`No se pudo ejecutar el diagnóstico: {{error}}`,retry:`Ejecutar de nuevo`,runButton:`Ejecutar diagnóstico`,sectionTitle:`Diagnóstico de conexión`,sectionDescription:`Compruebe por qué una impresora no se conecta o no imprime — accesibilidad de los puertos, modo desarrollador LAN, modo de red de Docker y credenciales.`,noPrinters:`No hay impresoras configuradas.`,overall:{ok:`No se encontraron problemas — la conexión de la impresora parece correcta.`,warnings:`La impresora debería funcionar, pero algunas cosas necesitan atención.`,problems:`Se encontraron problemas que explican por qué la impresora no se conecta o no imprime.`},check:{port_mqtt:{title:`Puerto de control (MQTT 8883)`,pass:`Accesible — la impresora acepta conexiones de control.`,fail:`El puerto 8883 no es accesible. La impresora está apagada, en una dirección IP distinta, o un cortafuegos lo está bloqueando. Verifique la IP de la impresora y que nada bloquee el puerto 8883.`},port_ftps:{title:`Puerto de transferencia de archivos (FTPS 990)`,pass:`Accesible — el envío de archivos de impresión funcionará.`,warn:`El puerto 990 no es accesible. La supervisión puede seguir funcionando, pero el envío de impresiones a la impresora fallará. Asegúrese de que el puerto 990 no esté bloqueado.`,warn_no_tls:`El puerto 990 está abierto, pero el servicio de archivos de la impresora no completa el protocolo de enlace TLS. No se pueden obtener los archivos de impresión, las portadas ni los timelapses, por lo que los archivos quedan vacíos. Reinicie la impresora — desbloquear el puerto no servirá.`},external_storage:{title:`Almacenar archivos enviados en almacenamiento externo (paso 4 de instalación)`,pass:`La impresora informa que esta opción está activada — los archivos enviados se guardarán en la tarjeta SD y los archivos tendrán miniaturas y metadatos del slicer.`,fail:`La impresora informa que esta opción está desactivada. Active "Almacenar archivos enviados en almacenamiento externo" — en firmware reciente (P2S 01.02 / Bambu Studio 2.6+) el conmutador está en los Ajustes de Impresión de la impresora; en versiones anteriores está en la pestaña Dispositivo de Bambu Studio / OrcaSlicer. Sin esta opción, cada impresión archivada queda sin miniatura ni metadatos del slicer.`,skip:`No comprobado — se necesita una conexión MQTT activa. En slicers más antiguos donde este ajuste solo existe en el slicer, la impresora no lo reporta, así que esta comprobación pasa aunque la opción esté desactivada — verifique el paso 4 de la instalación manualmente.`,skip_unsupported_model:`Este modelo tiene ranura SD pero no hay forma de activar la opción — el firmware actual de la serie P1 no muestra el interruptor en Bambu Studio y la impresora no tiene pantalla. Aquí no hay nada que arreglar; a las impresiones archivadas pueden faltarles miniaturas y metadatos del slicer hasta que Bambu Lab lo admita por firmware.`,fail_no_media:`La opción está activada, pero la impresora no detecta ninguna tarjeta ni memoria en su ranura, así que los archivos enviados no tienen dónde ir. Inserte una e imprima de nuevo — hasta entonces, cada impresión archivada carecerá de miniatura y de metadatos del laminador.`,warn_internal_storage:`La opción está activada y hay almacenamiento presente, pero la última impresión aun así fue al almacenamiento interno de la impresora, que Bambuddy no puede leer. En la serie H2, la P2S y la X2D, el botón «Imprimir» de Bambu Studio siempre envía ahí, sea cual sea este ajuste. Las impresiones se archivan con su nombre y sus tiempos, pero sin miniatura ni metadatos del laminador. Para archivos completos, inicia las impresiones desde Bambuddy o lamina en OrcaSlicer, o bien en Bambu Studio usa «Enviar» con «Externo» y luego inicia la impresión.`,warn_internal_history:`La opción está activada y hay almacenamiento, pero la última impresión salió de un archivo que ya estaba en la impresora: una reimpresión desde su pantalla, un inicio desde Handy o un archivo enviado antes. Esa biblioteca reside en el almacenamiento interno, que Bambuddy no puede leer, y ninguna opción lo cambia, porque para esa impresión no se envió nada. Se sigue archivando con su nombre y sus tiempos, pero sin miniatura ni metadatos del laminador. Para archivos completos, inicia las impresiones desde Bambuddy o envíalas desde el laminador.`},port_rtsps:{title:`Puerto de la cámara ({{protocol}} {{port}})`,pass:`Accesible — la transmisión de la cámara funcionará.`,warn:`El puerto {{port}} no es accesible. La vista de la cámara en directo no funcionará. Esto no afecta a la impresión.`},macos_local_network:{title:`Permiso de red local de macOS`,pass:`macOS permite que Bambuddy acceda a la red local.`,warn_unsigned:`El Python que ejecuta Bambuddy no tiene firma de código, así que macOS no tiene a qué asociar el permiso de red local y descarta en silencio todas las conexiones con la impresora: sin error y sin solicitud. Ejecuta el actualizador de Bambuddy (install/update_macos.sh), que lo firma, y reinicia Bambuddy. Intérprete: {{executable}}`,warn_permission:`Si la impresora está encendida y en esta dirección, abre Ajustes del Sistema > Privacidad y seguridad > Red local y comprueba que el Python de Bambuddy esté activado. Si no lo está, macOS descarta las conexiones locales en silencio, y actualizar Python puede dejar atrás el permiso anterior.`},network_mode:{title:`Modo de red del contenedor`,genericRuntime:`un contenedor`,pass:`Ejecutándose en {{runtime}} con red de host.`,warn:`Bambuddy se está ejecutando en {{runtime}} con red de tipo bridge. La detección de impresoras y la impresora virtual necesitan el modo de red de host — vuelva a crear el contenedor con red de host ("network_mode: host" en docker-compose, "--network=host" en Podman).`,skip:`No se está ejecutando en un contenedor — no aplicable.`,skip_unknown:`Bambuddy se está ejecutando en {{runtime}}, pero no se pudo determinar su modo de red. Si la detección de impresoras o la impresora virtual no funcionan, vuelva a crear el contenedor con red de host.`,skip_system_container:`Bambuddy se está ejecutando en un contenedor de sistema {{runtime}}, que está en la LAN como una máquina virtual — no aplicable.`},subnet:{title:`Subred de la red`,pass:`La impresora y Bambuddy están en la misma subred.`,warn:`La impresora ({{printer_ip}}) y Bambuddy ({{host_ip}}) están en subredes distintas. Es posible que no se alcancen entre sí a menos que se configure el enrutamiento entre las subredes.`,skip:`No se pudo determinar la subred — omitido.`},mqtt_auth:{title:`Credenciales de la impresora`,pass:`La impresora aceptó la conexión.`,fail:`La impresora es accesible pero Bambuddy no está conectado a ella. Lo más probable es que el código de acceso o el número de serie sean incorrectos — el código de acceso cambia cada vez que se conmuta el modo Solo LAN o el modo desarrollador, así que vuelva a copiarlo de la pantalla de la impresora. Una impresora que se está reiniciando, o que ya alcanzó su límite de conexiones simultáneas, se ve igual.`,fail_auth_rejected:`La impresora rechazó las credenciales de Bambuddy. El código de acceso o el número de serie son incorrectos — el código de acceso cambia cada vez que se conmuta el modo Solo LAN o el modo desarrollador, así que vuelva a copiarlo de la pantalla de la impresora y guárdelo en la configuración de la impresora.`,skip:`No comprobado — no se pudo alcanzar la impresora.`},developer_mode:{title:`Modo desarrollador LAN`,pass:`El modo desarrollador está activado.`,fail:`El modo desarrollador está DESACTIVADO en la impresora. Actívelo en los ajustes de LAN de la impresora — y confirme con Aceptar. Sin él, las impresiones no comenzarán.`,skip:`No se pudo comprobar — requiere una conexión activa con la impresora.`},printer_publishing:{title:`La impresora publica estado`,pass:`La impresora está publicando actualizaciones de estado — AMS, filamentos y perfiles K se reflejarán correctamente en el slicer.`,fail:`El broker MQTT aceptó la conexión, pero la impresora no ha publicado ningún informe de estado. Casi siempre se trata de un número de serie incorrecto o con mayúsculas/minúsculas mal escritas — el topic device/<serial>/report distingue entre mayúsculas y minúsculas. Revise el número de serie en los ajustes de la impresora comparándolo con la pantalla del aparato.`,skip:`No se pudo comprobar — requiere una conexión activa con la impresora.`}}},systemHealth:{sectionTitle:`Estado del sistema`,sectionDescription:`Analiza los registros recientes en busca de problemas conocidos que normalmente puedes resolver tú mismo, antes de que se conviertan en un ticket de soporte.`,rescan:`Volver a analizar`,clean:`No se encontraron problemas conocidos en las últimas {{times}} entradas de registro.`,logUnavailable:`El registro en archivo está desactivado, por lo que no se pueden analizar los registros. Activa el registro en archivo para usar esta comprobación.`,learnMore:`Cómo solucionarlo`,fixLabel:`Solución:`,occurrences:`Visto {{times}}× — última vez a las {{lastSeen}}`,category:{layer8:`Puedes solucionarlo`,environment:`Entorno`,bug:`Por favor, repórtalo`},signature:{"ftp-auth-rejected":{name:`La impresora rechazó el código de acceso`,cause:`La impresora rechazó el inicio de sesión de transferencia de archivos. El código de acceso es incorrecto o cambió tras activar el Modo Desarrollador.`,fix:`Vuelve a copiar el código de acceso desde la pantalla de la impresora (ajustes de LAN) y actualízalo en los ajustes de la impresora en Bambuddy.`},"ftp-connection-timeout":{name:`Se agotó el tiempo de la conexión de transferencia de archivos`,cause:`Bambuddy no pudo alcanzar el puerto de transferencia de archivos de la impresora (FTPS 990). El puerto está bloqueado, o la impresora está apagada o en otra subred.`,fix:`Asegúrate de que nada bloquee el puerto 990 entre Bambuddy y la impresora, y de que ambos estén en la misma red.`},"ftp-ssl-error":{name:`Falló el protocolo de enlace seguro de transferencia de archivos`,cause:`El servicio de archivos de la impresora respondió en el puerto 990 sin TLS. Su servidor de archivos se ha bloqueado: es un fallo de la impresora, no del cortafuegos ni del firmware.`,fix:`Reinicia la impresora. Hasta entonces no se pueden descargar archivos de impresión, portadas ni timelapses; la impresión en sí no se ve afectada.`},"bambu-cloud-captcha":{name:`Bambu Cloud solicita un CAPTCHA`,cause:`La protección antiabuso de Bambu está verificando esta red, por lo que ningún inicio de sesión en Bambu Cloud puede completarse. Depende de la dirección IP pública, no de tu cuenta ni de esta instalación.`,fix:`Espera: suele resolverse en unas horas y los intentos repetidos lo prolongan. Mientras tanto, conéctate con un token de acceso obtenido en una sesión del navegador.`},"mqtt-connection-flapping":{name:`La conexión con la impresora se cae continuamente`,cause:`La conexión de control (MQTT 8883) se desconecta y reconecta repetidamente, normalmente por una red débil o un puerto parcialmente bloqueado.`,fix:`Comprueba la señal Wi-Fi en la impresora, usa preferentemente una conexión por cable y asegúrate de que el puerto 8883 sea accesible de forma fiable.`},"camera-connection-refused":{name:`Transmisión de cámara inaccesible`,cause:`No se pudo acceder a la cámara en vivo en el puerto RTSPS 322. El puerto está bloqueado, o la cámara o la vista en vivo por LAN están desactivadas en la impresora.`,fix:`Activa la cámara y la vista en vivo por LAN en la impresora y asegúrate de que el puerto 322 no esté bloqueado. Esto no afecta a la impresión.`},"database-locked":{name:`Conflictos de escritura en la base de datos`,cause:`La base de datos SQLite presenta errores "database is locked" bajo carga, algo habitual al usar varias impresoras a la vez.`,fix:`Cambia Bambuddy a una base de datos PostgreSQL externa. Consulta la guía de PostgreSQL en la documentación.`}}},vpDiagnostic:{title:`Comprobación de configuración — {{name}}`,runButton:`Ejecutar comprobación de configuración`,running:`Ejecutando comprobación de configuración...`,runFailed:`No se pudo ejecutar la comprobación de configuración: {{error}}`,retry:`Volver a comprobar`,overall:{ok:`Todas las comprobaciones se superaron — esta impresora virtual está configurada correctamente.`,warnings:`La impresora virtual debería funcionar, pero algunas cosas requieren atención.`,problems:`Se encontraron problemas que explican por qué el laminador no puede ver ni usar esta impresora virtual.`},check:{enabled:{title:`Impresora virtual habilitada`,fail:`Esta impresora virtual está apagada. Actívela para que sea detectable.`},running:{title:`Servicios en ejecución`,fail:`La impresora virtual está habilitada pero sus servicios no se están ejecutando. Revise el registro de Bambuddy — normalmente los detiene un conflicto de IP de enlace o un error de permisos.`},bind_interface:{title:`Interfaz de red de enlace`,fail:`La interfaz de enlace no está configurada o ya no existe en este host. Elija una interfaz actual en el menú "Interfaz de enlace".`},access_code:{title:`Código de acceso configurado`,fail:`No hay ningún código de acceso configurado. Al laminador se le debe dar el mismo código de acceso de 8 caracteres que configura aquí.`},target_printer:{title:`Impresora de destino`,fail:`No hay ninguna impresora de destino seleccionada. El modo proxy necesita una impresora real a la que reenviar.`,warn:`La impresora de destino está desconectada ahora mismo — el reenvío se reanudará cuando vuelva a conectarse.`},port_ftps:{title:`Servicio de subida de archivos (puerto {{port}})`,fail:`No hay nada escuchando en el puerto {{port}} de la IP de enlace, por lo que el laminador no puede subir archivos. La causa habitual es un conflicto de puerto en esta interfaz.`},port_mqtt:{title:`Servicio de control (puerto {{port}})`,fail:`No hay nada escuchando en el puerto {{port}} de la IP de enlace, por lo que el laminador no puede conectarse ni mostrar el estado.`},port_bind:{title:`Servicio de detección (puerto {{port}})`,fail:`No hay nada escuchando en el puerto {{port}} de la IP de enlace, por lo que falla el protocolo de detección del laminador.`},privileged_ports:{title:`Vinculación a puertos privilegiados`,fail:`El puerto {{port}} está por debajo de 1024 y este servicio no tiene permiso para vincularlo, por eso no hay nada escuchando arriba. Añade AmbientCapabilities=CAP_NET_BIND_SERVICE a /etc/systemd/system/bambuddy.service y reinicia, o ejecuta "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))". En Docker, añade cap_add: [NET_BIND_SERVICE].`},certificate:{title:`Certificado TLS`,pass:`Certificado listo. Asegúrese de que el certificado de CA de Bambuddy (arriba) esté importado en el almacén de confianza de su laminador.`,fail:`Falta el certificado TLS de esta impresora virtual. Compruebe que el directorio de datos de Bambuddy tenga permisos de escritura.`}}},bugReport:{logHealthSummary:`Se encontraron problemas conocidos en tus registros`,logHealthIntro:`Los registros recientes coinciden con problemas conocidos. Revisa las soluciones de abajo: resolverlas podría arreglar tu problema sin un informe de error. Aun así, puedes enviar un informe abajo.`,title:`Informar de un error`,description:`Descripción`,descriptionPlaceholder:`¿Qué salió mal? Describa el problema...`,email:`Correo (opcional)`,emailPlaceholder:`su@correo.com`,emailPrivacy:`Si lo proporciona, su correo se incluirá en una sección plegada de la incidencia de GitHub para que el mantenedor pueda hacer un seguimiento.`,screenshot:`Captura de pantalla`,uploadOrPaste:`Suba, pegue o arrastre una imagen`,dataCollectedSummary:`¿Qué datos se incluyen en el informe?`,dataIncluded:`Incluidos:`,dataIncludedList:`Versión de la aplicación, sistema operativo, arquitectura, versión de Python, estadísticas de la base de datos (solo recuentos), modelos de impresora, número de boquillas, versiones de firmware, estado de la conectividad, estado de las integraciones (Spoolman, MQTT, HA), ajustes no sensibles, número de interfaces de red, detalles de Docker, versiones de las dependencias.`,dataNeverIncluded:`Nunca incluidos:`,dataNeverIncludedList:`Nombres de impresora, números de serie, códigos de acceso, contraseñas, direcciones IP, direcciones de correo, claves API, tokens, URL de webhook, nombres de host o nombres de usuario.`,submit:`Enviar`,startLogging:`Iniciar el registro de depuración`,stepEnableLogging:`Registro de depuración activado`,stepReproduce:`Reproduzca el problema ahora`,stepStopLogging:`Detener y enviar el informe`,stopAndSubmit:`Detener y enviar`,maxDuration:`Se detiene automáticamente tras {{minutes}} min`,stoppingLogs:`Recopilando registros y enviando...`,submitting:`Enviando el informe de error...`,submittingStepConnection:`Ejecutando comprobaciones de conectividad de impresoras`,submittingStepVirtualPrinters:`Ejecutando comprobaciones de configuración de impresoras virtuales`,submittingStepLogScan:`Analizando los registros recientes en busca de problemas conocidos`,submittingStepSubmit:`Enviando el informe a GitHub`,submitSuccess:`¡Informe de error enviado correctamente!`,submitFailed:`Error al enviar el informe de error`,diagnosticChecking:`Comprobando las conexiones de las impresoras...`,diagnosticHealthy:`La comprobación de conexión se superó — no se encontraron problemas en sus impresoras.`,diagnosticSummary:`{{problems}} de {{total}} impresoras tienen problemas de conexión`,diagnosticIntro:`Una o más impresoras tienen un problema de conexión que puede estar causando su problema. Despliegue una impresora a continuación para ver la solución — resolverla podría solucionar el problema sin un informe de error. Aún puede enviar un informe a continuación.`,thankYou:`¡Gracias!`,submitted:`Su informe de error se ha enviado.`,viewIssue:`Ver incidencia`,closeKeepsRecording:`Puedes cerrar este panel mientras reproduces el problema: la grabación sigue en marcha y al volver a abrirlo regresarás aquí.`,resumeRecording:`Informe de error grabando — {{elapsed}}. Haz clic para finalizar.`,resumeReport:`Reanudar informe`,unexpectedError:`Se produjo un error inesperado`},failureDetection:{title:`Detección de fallos por IA`,description:`Supervise las impresiones con una API de ML de Obico autoalojada y actúe automáticamente ante los fallos detectados.`,mlUrl:`URL de la API de ML de Obico`,mlUrlHint:`URL base de su contenedor ml_api de Obico autoalojado (p. ej. http://192.168.1.10:3333).`,mlToken:`Token de la API de ML (opcional)`,mlTokenPlaceholder:`Déjelo vacío si el servidor funciona sin ML_API_TOKEN`,mlTokenHint:`Debe coincidir con la variable de entorno ML_API_TOKEN de su contenedor ml_api de Obico. Déjelo vacío si el contenedor funciona sin token.`,test:`Probar`,testSuccess:`API de ML accesible y correcta.`,testSuccessTokenUnknown:`API de ML accesible y correcta. No se pudo comprobar el token.`,testFailed:`No se pudo alcanzar la API de ML.`,sensitivity:`Sensibilidad`,sensitivityLow:`Baja (menos falsos positivos)`,sensitivityMedium:`Media (equilibrada)`,sensitivityHigh:`Alta (detección temprana, más falsos positivos)`,sensitivityHint:`Ajusta los umbrales de confianza que activan las advertencias y los fallos.`,action:`Acción ante un fallo detectado`,actionNotify:`Solo notificar`,actionPause:`Pausar la impresión`,actionPauseOff:`Pausar y cortar la corriente`,pollInterval:`Intervalo de sondeo (segundos)`,pollIntervalHint:`Con qué frecuencia comprobar cada impresora mientras imprime. Mínimo 5 s, máximo 120 s.`,externalUrlMissing:`La URL externa no está establecida.`,externalUrlHint:`La API de ML obtiene la captura de la cámara por URL. Establezca la URL externa en los ajustes generales para que el contenedor de la API de ML pueda alcanzar Bambuddy.`,perPrinterTitle:`Impresoras supervisadas`,perPrinterHint:`Elija qué impresoras vigila el servicio de detección.`,monitorAll:`Supervisar todas las impresoras conectadas`,statusTitle:`Estado`,serviceRunning:`Servicio en ejecución`,thresholds:`Umbrales bajo / alto`,activePrinters:`Impresiones activas`,noActivePrints:`No hay impresiones en curso actualmente.`,historyTitle:`Detecciones recientes`,noHistory:`Aún no hay detecciones.`},makerworld:{title:`MakerWorld`,description:`Pegue la URL de un modelo de MakerWorld para importarlo e imprimirlo directamente desde Bambuddy — sin tener que salir a la aplicación Bambu Handy.`,pasteUrlHeader:`Importar desde MakerWorld`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… o pegue cualquier enlace de MakerWorld`,resolveButton:`Resolver`,signInRequiredTitle:`Se requiere iniciar sesión en Bambu Cloud para descargar`,signInRequiredBody:`Puede explorar los detalles del modelo de forma anónima, pero MakerWorld requiere una cuenta de Bambu Cloud para descargar archivos 3MF.`,signInExpiredTitle:`La sesión de Bambu Cloud ha caducado`,signInExpiredBody:`Sigue conectado a Bambuddy, pero Bambu Lab ha dejado de aceptar el token almacenado, por lo que las descargas fallarán. Inicie sesión de nuevo en Bambu Cloud.`,openCloudSettings:`Abrir los ajustes de la nube`,untitledModel:`Modelo sin título`,byCreator:`de {{name}}`,downloadsCount:`{{count}} descargas`,licensePrefix:`Licencia`,alreadyImported:`Ya está en la biblioteca`,openOnMakerworld:`Abrir en MakerWorld`,alreadyInLibrary:`Este modelo ya está en su biblioteca — encuéntrelo en Gestor de archivos → MakerWorld`,importSuccess:`{{filename}} importado — guardado en Gestor de archivos → MakerWorld`,platesHeader:`Camas ({{count}})`,plateDefaultName:`Cama {{n}}`,materialCount:`{{count}} filamentos`,amsRequired:`AMS necesario`,slicedFor:`Laminado para {{printer}}`,alsoCompatible:`También marcado como compatible: {{printers}}`,importToLibrary:`Guardar`,sliceIn:`Guardar y laminar en {{slicer}}`,disclaimer:`La integración con MakerWorld usa puntos de conexión de API documentados por la comunidad. Bambuddy no está afiliado a MakerWorld ni a Bambu Lab ni cuenta con su respaldo.`,lastImportSuccess:`Importado a su biblioteca`,lastImportAlreadyInLibrary:`Ya está en su biblioteca`,viewInLibrary:`Ver en el gestor de archivos`,openInBambuStudio:`Abrir en Bambu Studio`,openInOrcaSlicer:`Abrir en OrcaSlicer`,importTo:`Importar al gestor de archivos`,recentImportsHeader:`Importaciones recientes`,phaseResolving:`Resolviendo`,phaseDownloading:`Descargando`,folderAuto:`MakerWorld (predeterminada)`,importAll:`Importar todo`,importAllProgress:`Importando {{current}}/{{total}}`,openGallery:`Abrir la galería de imágenes`,galleryPrev:`Imagen anterior`,galleryNext:`Imagen siguiente`,deleteImport:`Quitar de la biblioteca`,importDeleting:`Quitando…`,importDeleted:`Quitado de la biblioteca`,confirmDelete:`¿Quitar {{filename}} de la biblioteca? Esto elimina el archivo local, pero la cama se puede volver a importar desde MakerWorld.`,errors:{resolveFailed:`No se pudo resolver esa URL de MakerWorld.`,downloadFailed:`Error en la descarga. Inténtelo de nuevo.`,deleteFailed:`No se pudo quitar el archivo de la biblioteca.`}},gcodeViewer:{filamentSlot:`Filamento {{n}}`,loading:`Leyendo la trayectoria…`,loadFailed:`No se pudo cargar el G-code de este archivo.`,showTravel:`Movimientos en vacío`,topLayer:`Capa superior`,bottomLayer:`Capa inferior`,noSource:`No se indicó ningún archivo para previsualizar.`,view:{filament:`Filamento`,feature:`Elemento`,height:`Altura`,width:`Ancho`},feature:{wall:`Paredes`,sparseInfill:`Relleno disperso`,solidInfill:`Relleno sólido`,bridge:`Puente / voladizo`,support:`Soporte`,skirt:`Falda / borde`,gapFill:`Relleno de huecos`,ironing:`Alisado`,primeTower:`Torre de purga`},back:`Atrás`,backToArchives:`Volver a los archivos de impresión`,backToFiles:`Volver al gestor de archivos`,plates:`Camas`,plateN:`Cama {{n}}`},libraryTrash:{title:`Papelera`,headerButton:`Papelera`,headerTooltip:`Ver los archivos movidos a la papelera`,backToFiles:`Volver al gestor de archivos`,subtitleAdmin:`Los archivos eliminados permanecen aquí durante {{days}} días y luego se eliminan automáticamente. Esta vista muestra los archivos en la papelera de todos los usuarios.`,subtitleUser:`Los archivos eliminados permanecen aquí durante {{days}} días y luego se eliminan automáticamente.`,loading:`Cargando la papelera…`,loadError:`No se pudo cargar la papelera.`,empty:`La papelera está vacía.`,summary:`{{count}} archivos · {{size}}`,emptyTrash:`Vaciar la papelera`,restore:`Restaurar`,purgeNow:`Eliminar ahora`,autoPurgeIn:`Se elimina automáticamente en {{when}}`,days:`días`,retentionLabel:`Eliminar automáticamente tras`,selectAll:`Seleccionar todo`,selectOne:`Seleccionar {{filename}}`,selectionCount:`{{count}} seleccionados`,bulkRestore:`Restaurar los seleccionados`,bulkPurge:`Eliminar los seleccionados`,col:{filename:`Archivo`,folder:`Carpeta`,size:`Tamaño`,deleted:`Movido a la papelera`,autoPurge:`Se elimina automáticamente`,owner:`Propietario`,actions:`Acciones`},confirm:{purgeTitle:`¿Eliminar permanentemente?`,purgeBody:`{{filename}} se eliminará del disco y no se podrá restaurar.`,emptyTitle:`¿Vaciar la papelera?`,emptyBody:`Los {{count}} archivos se eliminarán del disco. Esto no se puede deshacer.`,bulkPurgeTitle:`¿Eliminar permanentemente los archivos seleccionados?`,bulkPurgeBody:`Los {{count}} archivos seleccionados se eliminarán del disco y no se podrán restaurar.`,cta:`Eliminar permanentemente`},toast:{restored:`Archivo restaurado.`,restoreFailed:`No se pudo restaurar el archivo.`,purged:`Archivo eliminado permanentemente.`,purgeFailed:`No se pudo eliminar el archivo.`,emptied:`Se eliminaron {{count}} archivo(s) de la papelera.`,emptyFailed:`No se pudo vaciar la papelera.`,retentionSaved:`Eliminación automática establecida en {{days}} días.`,retentionFailed:`No se pudo guardar el ajuste de retención.`,bulkRestored:`Se restauraron {{count}} archivo(s).`,bulkPurged:`Se eliminaron {{count}} archivo(s).`}},libraryPurge:{title:`Purgar archivos antiguos`,headerButton:`Purgar antiguos`,headerTooltip:`Mover en bloque los archivos antiguos a la papelera`,description:`Limpie de un solo paso los archivos antiguos de su biblioteca. Los archivos con un historial de impresión envejecen según su fecha de última impresión; los archivos que nunca se imprimieron envejecen según su fecha de subida.`,ageLabel:`Mover los archivos de más de`,days:`días`,includeNeverPrinted:`Incluir los archivos que nunca se han impreso`,effectsTitle:`Qué ocurre cuando hace clic en Purgar`,effect1:`Los archivos coincidentes se mueven a la papelera — aún no se eliminan del disco.`,effect2:`Puede restaurarlos de la papelera en cualquier momento hasta que expire el periodo de retención.`,effect3:`Tras la retención, el barrido de la papelera los elimina permanentemente del disco.`,effect4:`Los archivos de carpetas externas (vinculadas) se omiten — Bambuddy nunca elimina bytes que no le pertenecen.`,previewLoading:`Comprobando cuántos archivos coinciden…`,previewFailed:`No se pudo previsualizar la purga.`,previewSummary:`{{count}} archivos · {{size}} se moverían a la papelera`,andMore:`…y {{count}} más`,warning:`Los archivos en la papelera siguen contando para el almacenamiento hasta que expire el periodo de retención. Vacíe la papelera después para liberar el disco de inmediato.`,confirmCta:`Mover {{count}} a la papelera`,purging:`Moviendo a la papelera…`,toast:{success:`Se movieron {{count}} archivo(s) a la papelera.`,failed:`No se pudieron purgar los archivos.`}},libraryAutoPurge:{enableLabel:`Purgar automáticamente los archivos antiguos`,enableDescription:`Ejecuta la purga de administración una vez al día. Los archivos van primero a la papelera — no se eliminan de inmediato.`,ageLabel:`Purgar automáticamente los archivos de más de`,ageDescription:`Mínimo 7 días, máximo 10 años. Usa la misma regla de antigüedad que el botón de purga manual.`,days:`días`,includeNeverPrinted:`Incluir los archivos que nunca se han impreso`,saveFailed:`No se pudieron guardar los ajustes de purga automática.`},archivePurge:{headerButton:`Purgar antiguos`,headerTooltip:`Eliminar en bloque los archivos antiguos`,title:`Purgar archivos antiguos`,description:`Limpie el historial de impresión antiguo. Cada archivo envejece según la finalización de su impresión más reciente — reimprimir un archivo actualiza su antigüedad, por lo que el trabajo activo nunca se purga.`,ageLabel:`Eliminar los archivos no impresos en los últimos`,days:`días`,effectsTitle:`Qué ocurre cuando hace clic en Purgar`,effect1:`Cada archivo coincidente se oculta de los listados y sus archivos se eliminan del disco (3MF, miniatura, time-lapse, 3MF de origen, archivo de diseño F3D, fotos).`,effect2:`La fila del archivo permanece en la base de datos para que las estadísticas rápidas conserven la contribución de filamento, tiempo, coste y energía — igual que el comportamiento predeterminado de la eliminación de un solo archivo.`,effect3:`Marque «Eliminar también de las estadísticas» abajo para descartar también la contribución a las estadísticas rápidas (coincide con la opción de eliminación de un solo archivo). Esa vía es irreversible.`,effect4:`Reimprimir un archivo actualiza su reloj de antigüedad, por lo que los archivos que aún usa están a salvo.`,purgeStatsLabel:`Eliminar también de las estadísticas`,purgeStatsHint:`Descarta los archivos coincidentes de las estadísticas rápidas (filamento, tiempo, coste, energía). Sin esto, las estadísticas rápidas conservan todas las contribuciones y solo los archivos abandonan el disco.`,previewLoading:`Comprobando cuántos archivos coinciden…`,previewFailed:`No se pudo previsualizar la purga.`,previewSummary:`{{count}} archivos · {{size}} se eliminarían`,andMore:`…y {{count}} más`,warning:`Los archivos se eliminan del disco y no se pueden restaurar. Descargue o marque como favorito todo lo que desee conservar antes de continuar.`,confirmCta:`Eliminar {{count}} archivo(s)`,purging:`Eliminando…`,toast:{success:`Se eliminaron {{count}} archivo(s).`,failed:`No se pudieron purgar los archivos.`}},archiveAutoPurge:{enableLabel:`Purgar automáticamente los archivos antiguos`,enableDescription:`Una vez al día, oculta los archivos de los listados y elimina sus archivos del disco cuando no se han impreso dentro del umbral. Reimprimir un archivo reinicia el reloj.`,ageLabel:`Eliminar automáticamente los archivos no impresos en los últimos`,ageDescription:`Mínimo 7 días, máximo 10 años. Se basa en la finalización de la impresión más reciente — reimprimir un archivo actualiza su antigüedad. Elimina el 3MF, la miniatura, el time-lapse, el 3MF de origen, el F3D y las fotos.`,days:`días`,purgeStatsLabel:`Eliminar también de las estadísticas`,purgeStatsDescription:`Cuando está activado, el barrido diario también descarta cada archivo purgado de las estadísticas rápidas (filamento, tiempo, coste, energía). Desactivado de forma predeterminada — las estadísticas rápidas conservan la contribución, solo los archivos abandonan el disco.`,runNow:`Purgar los archivos ahora`,saveFailed:`No se pudieron guardar los ajustes de purga automática.`},cameraTokens:{scope:{camera_stream:`Transmisión de cámara`,camwall:`Muro de cámaras`,overlay:`Superposición de streaming`},title:`Tokens de API de la cámara`,navTitle:`Tokens de API de la cámara`,description:`Tokens de larga duración para incrustar la transmisión de la cámara en Home Assistant, Frigate, pantallas en modo quiosco o cualquier otra herramienta que necesite una dirección estable. El alcance se elige al crearlos; un token se puede revocar en cualquier momento.`,loading:`Cargando…`,confirmRevoke:{title:`¿Revocar este token?`,body:`Cualquier dispositivo que use "{{name}}" perderá el acceso de inmediato. Esto no se puede deshacer.`,cancel:`Cancelar`,confirm:`Revocar`},create:{scopeLabel:`Alcance`,hintCameraStream:`Un token de transmisión de cámara solo puede obtener transmisiones e instantáneas. Úsalo para Home Assistant, Frigate o cualquier cosa que incruste una sola cámara.`,hintCamWall:`Un token de muro de cámaras abre /camwall en una pantalla sin iniciar sesión. Puede ver el nombre y el estado de cada impresora, y sus transmisiones de cámara. No puede ver nombres de archivo, direcciones ni códigos de acceso.`,hintOverlay:`Un token de superposición de streaming abre /overlay/{printerId} en una pantalla sin iniciar sesión, para OBS o cualquier transmisión en vivo. Puede ver la transmisión de la cámara de una impresora y su estado de impresión en vivo, incluido el nombre de archivo que aparece en pantalla. No puede ver direcciones ni códigos de acceso.`,title:`Crear nuevo token`,nameLabel:`Nombre del token`,namePlaceholder:`p. ej. Home Assistant`,daysLabel:`Días hasta la caducidad`,submit:`Crear`,hint:`La vida útil máxima es de 365 días. El valor del token se muestra solo una vez al crearlo — cópielo ahora.`},created:{camWallUrlTitle:`Dirección del muro de cámaras para esta pantalla`,camWallUrlHint:`Abre esta dirección en la pantalla. Cualquiera que pueda leerla puede ver el muro, así que trátala como una llave: revoca el token para dejar la pantalla sin acceso.`,overlayUrlTitle:`Dirección de superposición para OBS`,overlayUrlHint:`Agrega esto como Fuente de navegador en OBS. Cambia el número de /overlay/1 por el número de tu impresora (de su dirección en la página Impresoras). Cualquiera que pueda leer la dirección puede ver la transmisión, así que trátala como una llave: revoca el token para cortar el acceso.`,title:`Token creado — cópielo ahora`,warning:`Esta es la única vez que este token estará visible. Después de cerrar este diálogo no podrá volver a verlo nunca.`,copy:`Copiar`,dismiss:`Lo he guardado`},list:{scope:`Alcance`,myTitle:`Mis tokens`,allTitle:`Todos los usuarios (vista de administración)`,empty:`Aún no hay tokens.`,name:`Nombre`,owner:`Propietario`,prefix:`Prefijo`,created:`Creado`,expires:`Caduca`,lastUsed:`Usado por última vez`,revoke:`Revocar`,expired:`Caducado`},toast:{created:`Token creado`,createFailed:`Error al crear el token`,revoked:`Token revocado`,revokeFailed:`Error al revocar el token`,loadFailed:`Error al cargar los tokens`,copied:`Copiado al portapapeles`,copyFailed:`Error al copiar — selecciónelo y cópielo manualmente`}},forecast:{title:`Previsión`,noSpools:`No se encontraron bobinas activas. Añada bobinas a su inventario para ver los datos de previsión.`,noUsageData:`No hay datos de uso disponibles — no se puede proyectar la cronología de existencias.`,sku:`SKU`,material:`Material`,stock:`Existencias`,dailyRate:`Tasa`,daysLeft:`Días restantes`,emptyBy:`Se agota el`,reorderBy:`Reabastecer antes del`,actions:`Acciones`,trend:`Tendencia`,estimated:`Est.`,noData:`Sin datos`,timeframe:`Periodo`,chartTitle:`Existencias previstas — Los 5 materiales principales`,dashedLinesROP:`Líneas discontinuas = puntos de reabastecimiento`,stockLevel:`Nivel de existencias`,reorderPoint:`Punto de reabastecimiento`,safetyMargin:`Margen de seguridad`,trendLegend:`Tendencia (basada en el historial, nivel de servicio del 95%)`,estimatedLegend:`Estimada (diferencia de peso)`,noDataLegend:`Sin datos`,ropLabel:`PR`,ssLabel:`ES`,safetyStockLegend:`Existencias de seguridad`,stockArrivalLegend:`Llegada de existencias`,stockoutLegend:`Rotura de existencias`,alertCount_one:`{{count}} alerta`,alertCount_other:`{{count}} alertas`,order:`Pedir`,save:`Guardar`,cancel:`Cancelar`,settingsSaved:`Ajustes guardados`,failedSaveSettings:`Error al guardar los ajustes`,globalLeadTimeSaved:`Plazo de entrega global guardado`,globalLeadTime:`Plazo de entrega global`,globalLeadTimeHint:`Mínimo del plazo de entrega global — se usa en el cálculo del punto de reabastecimiento para todos los SKU`,skuLeadTimeOverride:`Anulación del plazo de entrega del SKU`,skuLeadTimeHint:`0 = usar el plazo de entrega global. Establezca >0 para anularlo para este SKU.`,safetyMarginLabel:`Margen de seguridad`,effectiveLeadTime:`Plazo de entrega efectivo`,effectiveLeadTimeHint:`máx(global {{global}} d, SKU {{sku}} d)`,reorderPointHint:`d̄ × PE + margen de seguridad — pida cuando las existencias alcancen este nivel`,safetyMarginHint:`Existencias de seguridad estadísticas (z=1,65 × σ × √PE) + margen definido por el usuario`,safetyMarginHintDays:`Margen añadido sobre las existencias de seguridad estadísticas.{{approx}}`,safetyMarginHintDaysApprox:` ≈ {{g}} g a la tasa actual.`,safetyMarginHintG:`Margen de peso fijo añadido sobre las existencias de seguridad estadísticas.{{approx}}`,safetyMarginHintGApprox:` ≈ {{days}} d a la tasa actual.`,individualSpools:`Bobinas individuales`,labelWeight:`Etiqueta`,spoolCount_one:`{{count}} bobina`,spoolCount_other:`{{count}} bobinas`,stockBreakRisk:`Riesgo de rotura de existencias`,stockBreakDetail:`Quedan {{days}} d, plazo de entrega {{lt}} d.`,stockBreakBefore:`Rotura de existencias antes del reabastecimiento`,reorderNow:`Reabastecer ahora`,reorderTriggerPassed:`La fecha de activación {{date}} ha pasado.`,shoppingList:`Lista de la compra`,shoppingListItems_one:`({{count}} artículo)`,shoppingListItems_other:`({{count}} artículos)`,shoppingListEmpty:`La lista de la compra está vacía. Haga clic en el icono del carrito de cualquier fila para añadir artículos.`,addToCart:`Añadir a la lista de la compra`,alertsSnoozed:`Silenciar las alertas de este SKU`,alertsEnabled:`Reactivar las alertas de este SKU`,addedToCart:`Añadido a la lista de la compra`,failedAddItem:`Error al añadir el artículo`,listView:`Lista`,logisticsView:`Logística`,qty:`Cant.`,weight:`Peso`,leadTime:`Plazo de entrega`,expectedRestock:`Reabastecimiento previsto`,status:`Estado`,note:`Nota`,pending:`Pendiente`,purchased:`Comprado`,received:`Recibido`,markPurchased:`Marcar como comprado`,markReceived:`Marcar como recibido — añade bobinas al inventario de existencias`,resetToPending:`Restablecer a pendiente`,remove:`Quitar`,clearAll:`Borrar todo`,downloadCsv:`CSV`,addToCartTitle:`Añadir a la lista de la compra`,byQuantity:`Por cantidad`,byDuration:`Por duración`,numberOfSpools:`Número de bobinas`,lastHowManyDays:`¿Cuántos días debería durar?`,noUsageQty:`No hay datos de uso — cantidad establecida en 1.`,noteOptional:`Nota (opcional)`,notePlaceholder:`p. ej. para el proyecto X, urgente…`,addNSpools_one:`Añadir {{count}} bobina`,addNSpools_other:`Añadir {{count}} bobinas`,onArrival:`A la llegada`,stockBreakIn:`Rotura de existencias en {{days}} d.`,stockRunsOutBefore:`Las existencias se agotan antes de que transcurra el plazo de entrega de {{lt}} d.`,atRate:`A {{rate}} g/día necesita`,moreSpools_one:`{{count}} bobina más`,moreSpools_other:`{{count}} bobinas más`,bridgeGap:`para cubrir el déficit.`,noReadAccess:`No tiene permiso para ver las previsiones de inventario.`,noWriteAccess:`No tiene permiso para modificar los ajustes de previsión.`}}},fr:{translation:{nav:{printers:`Imprimantes`,archives:`Archives`,queue:`File d'attente d'impression`,stats:`Statistiques`,profiles:`Profils`,maintenance:`Maintenance`,projects:`Projets`,inventory:`Filament`,finance:`Finances`,files:`Gestionnaire de fichiers`,makerworld:`MakerWorld`,notifications:`Notifications`,settings:`Paramètres`,system:`Système`,collapseSidebar:`Réduire la barre latérale`,expandSidebar:`Développer la barre latérale`,update:`Mise à jour`,updateAvailable:`Mise à jour disponible : v{{version}}`,updateAvailableBanner:`La version {{version}} est disponible !`,viewUpdate:`Voir la mise à jour`,viewOnGithub:`Voir sur GitHub`,keyboardShortcuts:`Raccourcis clavier (?)`,switchToLight:`Passer au mode clair`,switchToDark:`Passer au mode sombre`,switchToSystem:`Passer au mode système`,smartSwitches:`Interrupteurs intelligents`,logout:`Déconnexion`,installApp:`Installer l'application`,installAppSuccess:`Bambuddy a été installé`},common:{plusNMore:`+{{count}} autres`,save:`Enregistrer`,saving:`Enregistrement...`,cancel:`Annuler`,delete:`Supprimer`,edit:`Modifier`,add:`Ajouter`,close:`Fermer`,confirm:`Confirmer`,loading:`Chargement...`,error:`Erreur`,errorLoading:`Erreur de chargement`,retry:`Réessayer`,success:`Succès`,warning:`Avertissement`,enabled:`Activé`,disabled:`Désactivé`,yes:`Oui`,no:`Non`,on:`On`,off:`Désactivé`,all:`Tous`,none:`Aucun`,search:`Rechercher`,filter:`Filtrer`,sort:`Trier`,refresh:`Actualiser`,download:`Télécharger`,upload:`Téléverser`,uploading:`Téléversement...`,uploadFailed:`Échec du téléversement`,actions:`Actions`,status:`Statut`,name:`Nom`,description:`Description`,date:`Date`,time:`Heure`,hours:`heures`,minutes:`minutes`,seconds:`secondes`,days:`jours`,enable:`Activer`,disable:`Désactiver`,permissions:`Autorisations`,noPrinters:`Aucune imprimante configurée`,noData:`Aucune donnée disponible`,linkNotFound:`Lien non trouvé`,required:`Requis`,optional:`Optionnel`,dismiss:`Ignorer`,apply:`Appliquer`,reset:`Réinitialiser`,export:`Exporter`,import:`Importer`,clear:`Effacer`,selectAll:`Tout sélectionner`,deselectAll:`Tout désélectionner`,noChange:`— Aucun changement —`,unchanged:`Inchangé`,unassigned:`Non assigné`,unknown:`Inconnu`,unknownError:`Erreur inconnue`,today:`Aujourd'hui`,tomorrow:`Demain`,asap:`Dès que possible`,overdue:`En retard`,now:`Maintenant`,collapse:`Réduire`,expand:`Développer`,previous:`Précédent`,next:`Suivant`,viewArchive:`Voir l'archive`,viewInFileManager:`Voir dans le gestionnaire de fichiers`,addedBy:`Ajouté par {{username}}`,prints:`impressions`,more:`+{{count}} de plus`,ascending:`Croissant`,descending:`Décroissant`,back:`Retour`,copy:`Copier`,copied:`Copié\xA0!`,printer:`Imprimante`,remove:`Retirer`,type:`Type`,print:`Imprimer`,rename:`Renommer`,move:`Déplacer`,create:`Créer`,duplicate:`Dupliquer`,left:`Gauche`,right:`Droite`,user:`Utilisateur`,run:`Exécuter`,running:`En cours d'exécution...`},finance:{allTypes:`Tous les types`,allCostCenters:`Tous les centres de coûts`,title:`Finances`,subtitle:`Portefeuille, transactions personnelles et centres de coûts`,noAccess:`Vous n'avez pas la permission d'accéder aux données financières.`,personalView:`Vue personnelle`,adminView:`Vue administrateur`,createCostCenter:`Créer un centre de coûts`,adjustWallet:`Ajuster le portefeuille`,addManualPrint:`Ajouter un tirage manuel`,manageMembers:`Gérer les membres du centre de coûts`,currentBalance:`Solde personnel`,transactions:`Opérations`,personalTransactions:`Transactions personnelles`,costCenters:`Centres de coûts`,availableForPrinting:`Disponible pour l'attribution d'impression`,costCenterName:`Nom`,budgetType:`Type de budget`,monthlyBudget:`Budget mensuel`,totalBudget:`Budget total`,noBudget:`Aucun budget`,create:`Créer`,selectUser:`Sélectionner un utilisateur`,transactionType:`Type`,amount:`Montant`,noCostCenter:`Aucun centre de coûts`,descriptionOptional:`Description (facultative)`,applyAdjustment:`Appliquer l'ajustement`,memberCanPrint:`Le membre peut imprimer`,addMember:`Ajouter un membre`,canPrint:`Peut imprimer`,noMembers:`Aucun membre assigné.`,editCostCenter:`Modifier le centre de coûts`,myCostCenters:`Mes centres de coûts`,costCentersHint:`Vérifier les limites budgétaires et garder les coûts sous contrôle`,noCostCenters:`Aucun centre de coûts trouvé.`,owner:`Propriétaire`,balance:`Solde du compte`,unlimited:`Illimité`,budgetPolicyHint:`Les soldes de compte servent au suivi des coûts. L’impression est limitée uniquement par le budget du centre de coûts sélectionné ; sans budget, elle est illimitée.`,budget:`Budget`,shared:`Partagé`,cannotEditPrivateCostCenter:`Les centres de coûts privés ne peuvent pas être modifiés ici`,recentTransactions:`Transactions récentes`,transactionsHint:`Filtrer par type et centre de coûts`,first:`Première`,prev:`Précédente`,next:`Suivante`,last:`Dernière`,pageNumberOf:`Page {{page}} sur {{total}}`,noTransactions:`Aucune transaction disponible.`,noTransactionsForFilter:`Aucune transaction ne correspond aux filtres sélectionnés.`,costCenter:`Centre de coûts`,balanceAfter:`Solde après`,userWithId:`Utilisateur #{{id}}`,partial:`Partiel`,editTransaction:`Modifier la transaction`,selectCostCenter:`Sélectionner un centre de coûts...`,costCenterRequired:`Veuillez sélectionner un centre de coûts`,amountExample:`p. ex. 4,00`,manualAdjustmentExample:`p. ex. Ajustement manuel`,userRequired:`Veuillez sélectionner un utilisateur`,amountInvalid:`Le montant doit être un nombre valide`,createdCostCenter:`Centre de coûts créé`,createCostCenterFailed:`Impossible de créer le centre de coûts`,transactionDeleted:`Transaction supprimée`,deleteTransactionFailed:`Impossible de supprimer la transaction`,transactionEdited:`Transaction mise à jour et ledger recalculé`,editTransactionFailed:`Impossible de modifier la transaction`,manualPrintCreated:`Frais de tirage manuel ajoutés et ledger recalculé`,manualPrintFailed:`Impossible de créer le tirage manuel`,memberSaved:`Membre enregistré`,memberSaveFailed:`Impossible d'enregistrer le membre`,memberRemoved:`Membre supprimé`,memberRemoveFailed:`Impossible de supprimer le membre`,costCenterNameRequired:`Le nom du centre de coûts est requis`,costCenterUpdated:`Centre de coûts mis à jour`,costCenterUpdateFailed:`Impossible de mettre à jour le centre de coûts`,confirmDeleteCostCenter:`Supprimer le centre de coûts « {{name}} » ?`,costCenterDeleted:`Centre de coûts supprimé`,costCenterDeleteFailed:`Impossible de supprimer le centre de coûts`,deleteTransactionConfirm:`Supprimer cette transaction ? Les soldes seront recalculés automatiquement.`,deposit:`Dépôt`,withdraw:`Retrait`,printCharge:`Frais d'impression`,deleteTransaction:`Supprimer la transaction`},printers:{addPreflight:{checking:`Vérification de la connexion...`,warning:`Certaines vérifications de connexion ont échoué. Cette imprimante pourrait apparaître hors ligne. Examinez les vérifications ci-dessous, corrigez ce que vous pouvez, ou enregistrez quand même.`,back:`Retour`,saveAnyway:`Enregistrer quand même`},title:`Imprimantes`,addPrinter:`Ajouter une imprimante`,editPrinter:`Modifier l'imprimante`,deletePrinter:`Supprimer l'imprimante`,printerName:`Nom de l'imprimante`,serialNumber:`Numéro de série`,ipAddress:`Adresse IP / Nom d'hôte`,accessCode:`Code d'accès`,model:`Modèle`,nozzleCount:`Nombre de buses`,autoArchive:`Auto-archivage`,status:{available:`Disponible`,idle:`Inactif`,printing:`Impression en cours`,paused:`En pause`,offline:`Hors ligne`,problem:`Problème`,error:`Erreur`,finished:`Terminé`,unknown:`Inconnu`},temperatures:{nozzle:`Buse`,bed:`Plateau`,chamber:`Chambre`},heaterHistory:{title:`Historique des chauffages`,openLabel:`Voir l'historique des chauffages`,nozzle:`Buse`,nozzle2:`Buse 2`,bed:`Plateau`,chamber:`Chambre`,error:`Échec du chargement de l'historique`,empty:`Aucune donnée enregistrée`},progress:`{{percent}}% terminé`,timeRemaining:`{{time}} restant`,deleteConfirm:`Êtes-vous sûr de vouloir supprimer "{{name}}" ?`,maintenanceOk:`Maintenance OK`,maintenanceWarning:`{{count}} avertissement`,maintenanceWarning_plural:`{{count}} avertissements`,maintenanceDue:`{{count}} échéance`,maintenanceDue_plural:`{{count}} échéances`,sort:{name:`Nom`,status:`Statut`,model:`Modèle`,location:`Emplacement`,eta:`Temps restant`,ascending:`Tri croissant`,descending:`Tri décroissant`},cardSize:{small:`Petites cartes`,medium:`Cartes moyennes`,large:`Grandes cartes`,extraLarge:`Très grandes cartes`},pageView:{openCamWallPage:`Ouvrir le mur de caméras en pleine page`,cards:`Cartes`,camWall:`Mur de caméras`},camWall:{page:{tokenRejected:`Ce lien du mur de caméras n'est plus valide. Le jeton a peut-être expiré ou été révoqué.`,loadFailed:`Impossible de charger les imprimantes.`},noPrinters:`Aucune imprimante à afficher`,noSignal:`Aucun signal`,live:`En direct`,snap:`Photo`,off:`Arrêt`,summary:`{{live}} en direct, {{snap}} captures, {{total}} au total`,layer:`Couche {{cur}}/{{total}}`,timeLeft:`{{time}} restantes`,statusMode:{off:`Arrêt`,compact:`Compact`,full:`Complet`},settings:{title:`Paramètres du mur de caméras`,maxLive:`Flux en direct max.`,maxLiveHint:`Combien de vignettes diffusent en direct à la fois. Les autres se rafraîchissent en captures.`,snapshotInterval:`Intervalle de capture (secondes)`,snapshotIntervalHint:`À quelle fréquence les vignettes hors direct récupèrent une nouvelle capture.`,statusOverlay:`Overlay de statut`,statusOverlayHint:`Compact : badge de statut seul. Complet : + progression, couche, temps restant.`}},hideOffline:`Masquer hors ligne`,nextAvailable:`Prochaine disponible`,powerOn:`Allumer`,offlinePrintersWithPlugs:`Imprimantes hors ligne avec prises connectées`,noPrintersConfigured:`Aucune imprimante configurée pour le moment`,search:`Rechercher des imprimantes...`,noSearchResults:`Aucune imprimante ne correspond à votre recherche ou à vos filtres`,filter:{allStatuses:`Tous les statuts`,allLocations:`Tous les emplacements`},toolbar:{filters:`Filtres`,view:`Vue`,actions:`Actions`},readyToPrint:`Prête à imprimer`,external:`Externe`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Supprimer les archives d'impression`,noLabel:`Pas d'étiquette`,printPreview:`Aperçu avant impression`,width:`Largeur`,height:`Hauteur`,noObjectsFound:`Aucun objet trouvé`,objectsLoadedOnPrintStart:`Les objets sont chargés au début de l'impression`,willBeSkipped:`Sera sauté`,name:`Nom`,serialCannotBeChanged:`Le numéro de série ne peut pas être modifié`,locationHelp:`Utilisé pour grouper les imprimantes et filtrer la file d'attente`,wifiSignal:{veryWeak:`Très faible`,weak:`Faible`,fair:`Moyen`,good:`Bon`,excellent:`Excellent`},maintenanceUpToDate:`Maintenance à jour - Cliquez pour voir`,maintenance:{title:`En maintenance`,subtitle:`Cette imprimante est en pause — non connectée, non éligible à la file d'attente, sans notifications.`,pillLabel:`Maintenance`,exitButton:`Quitter la maintenance`,menuEnter:`Activer le mode maintenance`,menuExit:`Quitter le mode maintenance`,toastEntered:`{{name}} est maintenant en mode maintenance`,toastExited:`{{name}} est de nouveau en ligne`,confirmMidPrintTitle:`Passer en mode maintenance pendant une impression ?`,confirmMidPrintMessage:`{{name}} est en cours d'impression. Le mode maintenance déconnectera MQTT et arrêtera le suivi de progression ainsi que les notifications de fin pour ce travail. Continuer ?`,editFieldLabel:`Mode maintenance`,editFieldHelp:`Quand activé, cette imprimante est mise en pause de MQTT, de la file d'attente et des notifications — utile pour les réparations, les installations Bambuddy parallèles ou une suspension temporaire.`},chamberLightOn:`Allumer la lumière de la chambre`,chamberLightOff:`Éteindre la lumière de la chambre`,files:`Fichiers`,browseFiles:`Parcourir les fichiers de l'imprimante`,autoOffAfterPrint:`Extinction auto après impression`,autoOffExecuted:`Extinction auto exécutée - rallumez pour réinitialiser`,hmsErrors:`Erreurs HMS`,viewHmsErrors:`Voir {{count}} erreur(s) HMS`,resume:`Reprendre`,pause:`Pause`,stop:`Arrêter`,camera:`Caméra`,skipObject:`Sauter l'objet`,reconnect:`Reconnecter`,forceRefresh:`Forcer l'actualisation`,forceRefreshSuccess:`Actualisation demandée`,mqttDebug:`Débogage MQTT`,printerInformation:`Informations imprimante`,copyToClipboard:`Copier`,copied:`Copié !`,state:`État`,wifiSignalLabel:`Signal WiFi`,developerMode:`Mode développeur`,enabled:`Activé`,disabled:`Désactivé`,addedOn:`Ajoutée le`,sdCard:`Carte SD`,inserted:`Insérée`,notInserted:`Non insérée`,totalPrintHours:`Heures d'impression`,activeNozzle:`Active : buse {{nozzle}}`,amsSwitchInletTooltip:`Sélecteur de chemin de filament IN-{{inlet}} ({{side}}) — alimente les deux buses`,nozzleRack:`Rack à buses`,nozzleDocked:`Rangée`,nozzleMounted:`Montée`,nozzleActive:`Actif`,nozzleIdle:`Inactive`,nozzleDiameter:`Diamètre`,nozzleType:`Type`,nozzleStatus:`Statut`,nozzleFilament:`Filament`,nozzleWear:`Usure`,nozzleMaxTemp:`Temp Max`,nozzleSerial:`Série`,nozzleHardenedSteel:`Acier Trempé`,nozzleStainlessSteel:`Acier Inoxydable`,nozzleTungstenCarbide:`Carbure de Tungstène`,nozzleFlow:`Débit`,nozzleHighFlow:`Haut débit`,nozzleStandardFlow:`Standard`,firmwareUpdate:`Mise à jour Firmware`,firmwareInstructions:`Sur l'écran de l'imprimante, allez dans`,firmwareNav:`Naviguez vers`,settings:`Paramètres`,firmware:`Micrologiciel`,discoverPrinters:`Découvrir les imprimantes`,searching:`Recherche...`,manualEntry:`Saisie manuelle`,addFromCloud:`Ajouter depuis le Cloud`,toast:{printerDeleted:`Imprimante supprimée`,missingSpoolAssignment:`Impression démarrée sur {{printer}}. Attribution de bobine manquante pour : {{slots}}`,killSwitchTriggered:`Le coupe-circuit de facturation a arrêté une impression non autorisée sur {{printer}} : {{filename}}`,billingChargeFailed:`La facturation de {{filename}} sur {{printer}} a échoué. La réservation budgétaire a été conservée ; consultez les journaux du serveur.`,assignmentVerified:`Filament chargé dans l'emplacement {{slot}} ({{printer}})`,assignmentVerifiedNoKprofile:`Emplacement {{slot}} sur {{printer}} chargé, mais le profil de calibration de débit (profil K) n'a pas été appliqué`,assignmentNotConfirmed:`Impossible de confirmer l'attribution de l'emplacement {{slot}} sur {{printer}} — vérifiez l'emplacement AMS`,printerAdded:`Imprimante ajoutée`,printerUpdated:`Imprimante mise à jour`,failedToDelete:`Échec de la suppression`,failedToAdd:`Échec de l'ajout`,connectionFailedNotAdded:`Connexion à l'imprimante impossible. Vérifiez l'IP, le numéro de série et le code d'accès, et confirmez que le mode LAN-only est activé. L'imprimante n'a pas été ajoutée.`,failedToUpdate:`Échec de la mise à jour`,commandSent:`Commande envoyée`,failedToSendCommand:`Échec de l'envoi de la commande`,turnedOn:`{{name}} allumée`,failedToPowerOn:`Échec de l'allumage de {{name}}`,scriptTriggered:`Script déclenché`,printStopped:`Impression arrêtée`,printPaused:`Impression en pause`,printResumed:`Impression reprise`,referenceDeleted:`Référence supprimée`,detectionAreaSaved:`Zone de détection enregistrée`,failedToRunScript:`Échec du script`,failedToStopPrint:`Échec de l'arrêt`,failedToPausePrint:`Échec de la mise en pause`,failedToResumePrint:`Échec de la reprise`,failedToControlChamberLight:`Échec du contrôle de la lumière`,failedToSetSpeed:`Échec du réglage de la vitesse`,failedToUpdateSetting:`Échec de mise à jour du paramètre`,failedToSkipObjects:`Échec du saut d'objets`,failedToRereadRfid:`Échec lecture RFID`,failedToCheckPlate:`Échec vérification plateau`,failedToUpdateLabel:`Échec mise à jour étiquette`,failedToDeleteReference:`Échec suppression référence`,failedToSaveDetectionArea:`Échec enregistrement zone`,plateCheckEnabled:`Vérification plateau activée`,plateCheckDisabled:`Vérification plateau désactivée`,calibrationSaved:`Calibration enregistrée !`,calibrationFailed:`Échec de la calibration`,rfidRereadInitiated:`Lecture RFID initiée`,loadInitiated:`Chargement du filament…`,unloadInitiated:`Déchargement du filament…`,failedToLoad:`Échec du chargement du filament`,failedToUnload:`Échec du déchargement du filament`},connection:{connected:`Connecté`,offline:`Hors ligne`},plateStatus:{markCleared:`Marquer le plateau comme dégagé`,cleared:`Plateau dégagé`,notCleared:`Plateau non dégagé`,inUse:`Plateau en cours d'utilisation`},queue:{inQueue:`{{count}} impression en file`,inQueue_plural:`{{count}} impressions en file`},controls:`Contrôles`,rfid:{reread:`Relire RFID`},ams:{load:`Charger`,unload:`Décharger`,feedTitle:`Charger {{slot}} vers quelle buse ?`,feedPrompt:`Le Filament Track Switch peut diriger cet emplacement vers les deux buses. Choisissez celle à alimenter.`,feedLeft:`Buse gauche`,feedRight:`Buse droite`,feedAlreadyLoaded:`Déjà chargé`,switchNotReady:`Le Filament Track Switch n'est pas encore configuré. Affectez chaque AMS à une entrée sur l'imprimante, puis réessayez.`},bedJog:{limitWarning:`Les limites de déplacement ne sont pas appliquées lors des mouvements manuels : un bug du firmware Bambu ignore les butées logicielles pour les commandes à distance. Déplacez avec précaution pour éviter une collision.`,title:`Commandes de déplacement`,bed:`Plateau`,step:`Pas (mm)`,up:`Monter le plateau`,down:`Descendre le plateau`,toolheadUp:`Monter la tête`,toolheadDown:`Descendre la tête`,disabledWhilePrinting:`Désactivé pendant l'impression`,notHomedTitle:`Imprimante non référencée`,notHomedMessage:`L'imprimante n'a pas été référencée depuis la dernière impression. Lancez la référence automatique d'abord pour un positionnement sûr (parque la tête d'outil, puis référence X, Y et Z), ou déplacez quand même — les butées logicielles seront ignorées.`,homeZ:`Référence automatique`,moveAnyway:`Déplacer quand même`,homingStarted:`Référencement automatique en cours…`},permission:{noAdd:`Pas d'autorisation pour ajouter`,noEdit:`Pas d'autorisation pour modifier`,noDelete:`Pas d'autorisation pour supprimer`,noControl:`Pas d'autorisation pour contrôler`,noFiles:`Pas d'autorisation pour les fichiers`,noAmsRfid:`Pas d'autorisation pour le RFID`,noSmartPlugControl:`Pas d'autorisation pour les prises`,noCamera:`Pas d'autorisation pour les caméras`},modal:{addTitle:`Ajouter une imprimante`,editTitle:`Modifier l'imprimante`,myPrinter:`Mon imprimante`,selectModel:`Choisir un modèle...`,locationGroup:`Emplacement / Groupe (optionnel)`,locationPlaceholder:`ex: Atelier, Bureau`,autoArchiveLabel:`Auto-archiver les impressions terminées`,fromPrinterSettings:`Depuis les paramètres imprimante`,modelOptional:`Modèle (optionnel)`,saveChanges:`Enregistrer les modifications`},skipObjects:{tooltip:`Sauter des objets`,onlyWhilePrinting:`Sauter (uniquement pendant l'impression)`,requiresMultiple:`Sauter (nécessite 2+ objets)`,title:`Sauter des objets`,matchIdsInfo:`Faites correspondre les IDs avec l'écran de l'imprimante`,printerShowsIds:`L'écran affiche les IDs des objets sur le plateau`,skipSelected:`Sauter la sélection`,skipping:`Saut en cours...`,noObjectsSelected:`Aucun objet sélectionné`,selectObjectsToSkip:`Sélectionnez les objets à ignorer`,skipped:`sauté`,objectsSkipped:`Objets sautés`,activeCount:`{{count}} actifs`,waitForLayer:`Attendez la couche 2 pour sauter des objets (actuelle : {{layer}})`,skip:`Sauter`,confirmTitle:`Sauter l'objet ?`,confirmMessage:`Voulez-vous vraiment sauter "{{name}}" ? Cette action est irréversible.`,confirmAllMessage:`Tous les objets restants sont sélectionnés. Cela arrêtera la tâche d’impression. Continuer ?`,confirmMultipleMessage:`Sauter {{count}} objets sélectionnés ? Cette action est irréversible.`},confirm:{deleteTitle:`Supprimer l'imprimante`,deleteMessage:`Supprimer "{{name}}" ? Cela retirera tous les paramètres de connexion.`,deleteArchivesNote:`Tout l'historique sera définitivement supprimé.`,keepArchivesNote:`L'historique sera conservé mais plus associé à cette imprimante.`,stopTitle:`Arrêter l'impression`,stopMessage:`Arrêter l'impression sur "{{name}}" ?`,stopButton:`Arrêter`,pauseTitle:`Mettre en pause`,pauseMessage:`Mettre en pause l'impression sur "{{name}}" ?`,pauseButton:`Pause`,resumeTitle:`Reprendre l'impression`,resumeMessage:`Reprendre l'impression sur "{{name}}" ?`,resumeButton:`Reprendre`,powerOnTitle:`Allumer l'imprimante`,powerOnMessage:`Allumer "{{name}}" ?`,powerOnButton:`Allumer`,powerOffTitle:`Éteindre l'imprimante`,powerOffMessage:`Éteindre "{{name}}" ?`,powerOffWarning:`ATTENTION : "{{name}}" imprime ! L'éteindre maintenant peut endommager l'imprimante.`,powerOffButton:`Éteindre`,haToggleTitle:`Basculer "{{name}}"`,haToggleMessage:`Basculer l'entité Home Assistant {{entity}} ? Cela peut couper l'alimentation si elle est actuellement activée.`,haToggleWarning:`ATTENTION : "{{name}}" imprime ! Basculer {{entity}} peut couper l'alimentation et interrompre l'impression. Continuer ?`,haToggleButton:`Basculer`},bulk:{select:`Sélectionner`,selectAll:`Tout sélectionner`,selectByLocation:`Sélectionner par emplacement`,selected:`{{count}} sélectionné(s)`,actions:{stop:`Arrêter`,pause:`Pause`,resume:`Reprendre`,clearPlate:`Vider le plateau`,clearHMS:`Effacer les notifications`},confirm:{stopTitle:`Arrêter {{count}} impressions`,stopMessage:`Cela annulera les impressions actives sur {{count}} imprimante(s). Cette action est irréversible.`,stopButton:`Tout arrêter`,pauseTitle:`Mettre en pause {{count}} impressions`,pauseMessage:`Cela mettra en pause les impressions actives sur {{count}} imprimante(s).`,pauseButton:`Tout mettre en pause`,clearPlateTitle:`Vider {{count}} plateaux`,clearPlateMessage:`Cela videra le plateau sur {{count}} imprimante(s) et pourrait lancer les travaux en file d'attente.`,clearPlateButton:`Tout vider`},success:`{{action}} terminé sur {{count}} imprimante(s)`,partial:`{{succeeded}} réussi(s), {{failed}} échoué(s)`,noneApplicable:`Aucune imprimante sélectionnée n'est dans le bon état pour cette action`,selectByState:`Sélectionner par état`},discovery:{title:`Découvrir les imprimantes`,searching:`Recherche...`,scanning:`Scan en cours...`,scanProgress:`Scan... {{scanned}}/{{total}}`,foundPrinters:`{{count}} imprimante(s) trouvée(s)`,noPrintersFound:`Aucune imprimante trouvée`,noPrintersFoundSubnet:`Aucune imprimante dans ce sous-réseau.`,noPrintersFoundNetwork:`Aucune imprimante sur le réseau.`,allConfigured:`Toutes les imprimantes trouvées sont déjà configurées.`,alreadyAdded:`Déjà ajoutée`,select:`Sélectionner`,manualEntry:`Saisie manuelle`,addFromCloud:`Ajouter depuis le Cloud`,subnetToScan:`Sous-réseau à scanner`,dockerNote:`Docker détecté. Entrez le sous-réseau en notation CIDR. Nécessite network_mode: host.`,scanSubnet:`Scanner le sous-réseau`,discoverNetwork:`Découvrir sur le réseau`,scanningSubnet:`Scan du sous-réseau pour imprimantes Bambu...`,scanningNetwork:`Scan du réseau...`,serialRequired:`Série requis`,unknown:`Inconnu`,failedToStart:`Échec du démarrage de la découverte`,customSubnetOption:`Sous-réseau personnalisé...`,customSubnetLabel:`Sous-réseau personnalisé (CIDR)`,customSubnetNote:`Utilisez un sous-réseau personnalisé si votre imprimante se trouve sur un réseau différent de celui de ce serveur. Les ports FTP (990) et MQTT (8883) doivent être accessibles à travers la limite de routage.`},drying:{start:`Démarrer le séchage`,stop:`Arrêter le séchage`,temperature:`Température`,duration:`Durée`,hours:`heures`,timeRemaining:`{{time}} restant`,active:`Séchage`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`Séchage non pris en charge`,powerRequired:`Brancher l'adaptateur secteur AMS pour activer le séchage`,cannotDryNow:`L'AMS ne peut pas démarrer le séchage pour le moment`,startingDrying:`Démarrage du séchage...`,toastCommandSent:`Commande de séchage envoyée`,toastStopped:`Séchage arrêté`,toastNotStarted:`L'imprimante a accepté la commande, mais l'AMS n'a pas démarré le séchage. Vérifiez que l'adaptateur secteur de l'AMS est branché et que l'imprimante est inactive.`,screenOnly:`Sur cette imprimante, le séchage de l'AMS ne peut être commandé que depuis l'écran de l'imprimante (limitation de Bambu)`,stoppingDrying:`Arrêt du séchage...`,rotateTray:`Tourner la bobine pendant le séchage`,rotateUnavailableReason:`Indisponible — un emplacement de cet AMS est chargé vers la tête d'impression. La bobine est bloquée par le tube d'alimentation et ne peut pas tourner. Rétractez d'abord le filament.`,startMode:`Heure de démarrage`,modeNow:`Maintenant`,modeDelay:`Après un délai`,modeAtTime:`À une heure`,schedule:`Planifier`,scheduledFor:`Séchage planifié pour {{time}}`,scheduledAsap:`Séchage planifié (en attente de l'imprimante)`,cancelScheduled:`Annuler le séchage planifié`,scheduleFailed:`Échec de la planification du séchage`,retractFilament:`Rétractez le filament à la sortie de l'AMS pour démarrer le séchage`,waitingAmsNotFound:`En attente de la détection de l'AMS`,waitingOffline:`En attente de la connexion de l'imprimante`,waitingPrinterBusy:`En attente de la disponibilité de l'imprimante`,waitingAlreadyDrying:`En attente de la fin du cycle de séchage en cours`,waitingInterrupted:`Interrompu, reprendra lorsque l'imprimante sera libre`,scheduleFailedReason:`Échec du séchage planifié : {{reason}}`,scheduleFailedUnknown:`Erreur inconnue`,dismissFailed:`Masquer`},amsBackup:{titleOn:`AMS Filament Backup est ACTIVÉ. Cliquez pour désactiver.`,titleOff:`AMS Filament Backup est DÉSACTIVÉ. Cliquez pour activer.`,titleUnknown:`État de l'AMS Filament Backup indisponible sur cette imprimante.`,toastEnabled:`AMS Filament Backup activé`,toastDisabled:`AMS Filament Backup désactivé`,modalTitle:`AMS Filament Backup`,modalHelp:`Lorsque l'emplacement actif s'épuise, l'imprimante passe aux emplacements ayant le même preset et la même couleur dans cet ordre.`,modalNoSlots:`Aucun filament chargé.`,modalNoPairs:`Aucune paire de secours — aucun emplacement ne partage à la fois preset et couleur.`,extruderRightShort:`D`,extruderLeftShort:`G`,stateOn:`Activé`,stateOff:`Désactivé`,stateUnknown:`Non pris en charge par cette imprimante`},activeJobSlot:{title:`Cet emplacement est le filament {{n}} dans l'impression active`,ariaLabel:`Emplacement d'impression active {{n}}`},expectedSlot:{title:`L'imprimante attend du filament dans cet emplacement`,ariaLabel:`Emplacement de filament attendu {{n}}`,label:`{{ams}} · Emplacement {{slot}}`,external:`Bobine externe`},filaments:`Filaments`,externalSpool:{hide:`Masquer la bobine externe`,show:`Afficher la bobine externe`},openCameraOverlay:`Ouvrir la caméra en superposition`,openCameraWindow:`Ouvrir la caméra dans une fenêtre`,firmwareUpdateAvailable:`Mise à jour firmware : {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — À jour`,firmwareUpdateButton:`Mettre à jour`,plateDetection:{noPermission:`Pas d'autorisation de modification`,enabledClick:`Vérification activée - Cliquez pour désactiver`,disabledClick:`Vérification désactivée - Cliquez pour activer`,manageCalibration:`Gérer la calibration de détection`,calibrationRequired:`Calibration requise`,calibrationInstructions:`Videz le plateau, puis cliquez sur Calibrer.`,calibrationDescription:`Capture une image de référence du plateau vide.`,calibrationTip:`Conseil : Stockez jusqu'à 5 références. Le système utilise la meilleure correspondance.`,plateEmpty:`Le plateau semble vide`,objectsDetected:`Objets détectés sur le plateau`,confidence:`Confiance`,difference:`Différence`,analysisPreview:`Aperçu de l'analyse :`,analysisLegend:`Cadre vert = zone, Rouge = différences`,savedReferences:`Références ({{count}}/{{max}})`,deleteReference:`Supprimer la référence`,labelPlaceholder:`Étiquette...`,clickToEdit:`{{label}} - Modifier`,clickToAddLabel:`Ajouter une étiquette`},speed:{title:`Vitesse d'impression`,silent:`Silencieux (50%)`,standard:`Standard (100%)`,sport:`Sport (124%)`,ludicrous:`Ludicrous (166%)`},airduct:{title:`Mode conduit d'air`,cooling:`Refroidissement`,heating:`Chauffage`},noSdCard:`Pas de SD`,door:{open:`Ouverte`,closed:`Fermée`},fans:{partCooling:`Ventilateur pièce`,auxiliary:`Ventilateur auxiliaire`,leftAuxiliary:`Ventilateur auxiliaire gauche`,exhaust:`Extraction`,chamber:`Ventilateur chambre`},clickToViewHmsErrors:`Cliquez pour voir les erreurs HMS`,aiDetection:{safe:`Sûr`,warning:`Avertissement`,failure:`Échec`,idle:`Inactif`,error:`Ne vérifie pas`,unknown:`Démarrage`,tooltipError:`La détection d'échec par IA ne vérifie pas cette impression : {{reason}} - cliquez pour les détails`,tooltipUnknown:`Détection d'échec par IA : en attente du premier résultat - cliquez pour les détails`,errorHint:`Cette impression n'est pas vérifiée. La détection reprendra automatiquement une fois le problème ci-dessous résolu.`,tooltip:`Détection d'échec par IA : {{status}} (score {{score}}) - cliquez pour les détails`,tooltipIdle:`Détection d'échec par IA activée - la surveillance démarre à la prochaine impression - cliquez pour les détails`,modalTitle:`Détection d'échec par IA - {{name}}`,currentStatus:`Statut`,score:`Score`,framesAnalyzed:`Images analysées`,idleHint:`Aucune impression n'est surveillée actuellement. La surveillance démarre automatiquement à la prochaine impression.`,lastError:`Dernière erreur`,openSettings:`Ouvrir les paramètres`},estimatedCompletion:`Fin estimée`,plateNumber:`Plaque {{number}}`,slotOptions:`Options du slot`,amsPopup:{friendlyName:`Nom AMS`,friendlyNamePlaceholder:`ex. Nom convivial AMS`,serialNumber:`Numéro de série`,firmwareVersion:`Micrologiciel`,save:`Enregistrer`,clear:`Effacer`,noEditPermission:`Vous n'avez pas la permission de renommer les unités AMS`},firmwareModal:{title:`Mise à jour Firmware`,titleUpToDate:`Infos Firmware`,currentVersion:`Actuelle :`,latestVersion:`Dernière :`,releaseNotes:`Notes de version`,checkingPrereqs:`Vérification des prérequis...`,sdCardReady:`Carte SD prête. Cliquez pour téléverser.`,uploadedSuccess:`Firmware téléversé !`,applyInstructions:`Pour appliquer sur l'imprimante :`,step1:`Sur l'écran, allez dans Paramètres`,step2:`Allez dans Firmware`,step3:`Sélectionnez "Mettre à jour depuis carte SD"`,step4:`Prévoyez 10-20 minutes`,done:`Terminé`,starting:`Démarrage...`,uploadFirmware:`Téléverser le Firmware`,uploadFailed:`Échec du téléversement : {{error}}`,uploadedToast:`Firmware téléversé ! Lancez la mise à jour sur l'écran.`,availableVersions:`Versions disponibles`,usable:`Utilisable`,unavailable:`Indisponible`,installed:`Installé`,newerBadge:`plus récent`,olderBadge:`plus ancien`,currentBadge:`actuel`},accessCodePlaceholder:`Laissez vide pour garder l'actuel`,roi:{title:`Zone de détection (ROI)`,xStart:`Début X`,yStart:`Début Y`,width:`Largeur`,height:`Hauteur`,instruction:`Ajustez le cadre vert pour cibler le plateau.`},developerModeWarning:`Le mode développeur LAN n'est pas activé sur : {{names}}. Certaines fonctionnalités peuvent ne pas fonctionner.`,howToEnable:`Comment activer`,incompatibleFile:`Ce fichier a été tranché pour {{slicedFor}}, mais cette imprimante est une {{printerModel}}`,dropNotPrintable:`Seuls les fichiers .gcode et .gcode.3mf peuvent être imprimés`,dropToPrint:`Déposer pour imprimer`,dropToQueue:`Déposer pour mettre en file`},archives:{media:{title:`Vidéos d’impression`,download:`Télécharger les vidéos d’impression`,searching:`Recherche de vidéos sur l’imprimante…`,searchFailed:`Impossible de rechercher les vidéos sur l’imprimante.`,none:`Aucun timelapse ni segment de caméra IP n’a été trouvé pour cette impression.`,attachedTimelapse:`Timelapse joint`,printerFiles:`Fichiers encore présents sur l’imprimante`,downloadSelected:`Télécharger la sélection`,printerMissing:`L’imprimante n’est plus configurée`,timelapseUnavailable:`Impossible de lire le dossier des timelapses`,ipcamUnavailable:`Impossible de lire le dossier de la caméra IP`},title:`Archives d'impression`,no3mfBanner:{title:`Certaines impressions récentes n'ont pas pu être archivées avec leur miniature`,body:`Le slicer n'a pas laissé le fichier .gcode.3mf sur la carte SD de l'imprimante, donc Bambuddy n'a pas pu récupérer la miniature ni les métadonnées slicer. C'est généralement parce que « Stocker les fichiers envoyés sur stockage externe » est désactivé dans le slicer (onglet Périphérique de Bambu Studio / OrcaSlicer).`,docsLink:`Voir l'étape 4 de l'installation`,docsLinkInternalStorage:`Pourquoi cela arrive`,titleInternalStorage:`Certaines impressions récentes sont restées dans le stockage interne de l'imprimante`,bodyInternalStorage:`Bambu Studio a placé le fichier tranché dans le stockage interne de l'imprimante au lieu de la carte, Bambuddy n'avait donc rien à lire en FTP. Sur les séries H2, P2S et X2D, son bouton « Imprimer » le fait toujours : seul « Envoyer » propose un choix, et il est lui aussi réglé sur « Cache » par défaut. Ces impressions restent archivées avec leur nom et leurs durées, simplement sans miniature ni métadonnées slicer. Pour des archives complètes, lancez l'impression depuis Bambuddy ou tranchez dans OrcaSlicer, ou bien dans Bambu Studio utilisez « Envoyer » avec « Externe » puis lancez l'impression. Toutes nécessitent une carte ou une clé dans l'imprimante.`,titleNoExternalStorage:`Certaines impressions récentes n'ont pas pu être archivées — aucun stockage dans l'imprimante`,bodyNoExternalStorage:`L'imprimante ne signale ni carte ni clé dans son emplacement, le fichier tranché n'avait donc nulle part où atterrir et Bambuddy rien à lire. Insérez-en une et la prochaine impression sera archivée complètement.`,titleInternalHistory:`Certaines impressions récentes ont été lancées depuis un fichier déjà présent sur l'imprimante`,bodyInternalHistory:`Ces impressions sont parties de la bibliothèque de l'imprimante elle-même : une réimpression depuis son écran, un lancement depuis Handy, ou un fichier envoyé plus tôt et imprimé ensuite. Bambuddy lit les fichiers d'impression en FTP, qui ne dessert que la carte ou la clé, tandis que l'imprimante conserve cette bibliothèque dans une zone que le FTP n'atteint pas : il n'y avait donc aucun 3MF à lire. Aucun réglage du trancheur n'y change quoi que ce soit, puisque rien n'a été envoyé pour ces impressions. Elles restent archivées avec leur nom et leurs durées, et « Modifier l'archive » permet de saisir à la main le filament utilisé. Pour une archive complète, lancez plutôt l'impression depuis Bambuddy ou depuis votre trancheur.`,titleFtpsCooloff:`Certaines impressions récentes n'ont pas pu être archivées — l'imprimante a refusé la connexion de fichiers`,bodyFtpsCooloff:`Bambuddy a ouvert le port de transfert de fichiers de l'imprimante (FTPS 990) et celle-ci a répondu par autre chose que du TLS, si bien que rien n'a pu en être lu. Ces impressions restent archivées avec leur nom et leurs durées, simplement sans vignette ni métadonnées du trancheur. Ce n'est pas un réglage du trancheur ni quelque chose que vous avez modifié — les mêmes modèles et les mêmes firmwares fonctionnent normalement sur d'autres installations, et une imprimante touchée refonctionne généralement d'elle-même plus tard. Après un tel échec, Bambuddy suspend les transferts vers cette imprimante pendant cinq minutes puis revient chercher le fichier une fois la pause terminée : un épisode bref se répare donc tout seul, tandis qu'une fiche encore vide signifie que le refus a duré plus longtemps que la nouvelle tentative. On ignore encore ce qui le déclenche. Si cela se reproduit, activez la journalisation de débogage sur la page Système et joignez un paquet de support à votre signalement.`,titleFtpTransferFailed:`Certaines impressions récentes n'ont pas pu être archivées : le transfert du fichier a dépassé le temps imparti`,bodyFtpTransferFailed:`Le fichier tranché se trouvait sur la carte de l'imprimante et l'imprimante l'a bien servi, mais le transfert ne s'est pas terminé dans le temps imparti. Au démarrage d'une impression, l'imprimante gère aussi sa caméra, ses messages d'état et l'envoi du travail, et un gros 3MF ne passe pas toujours face à tout cela. Ces impressions restent archivées avec leur nom et leurs durées, simplement sans miniature ni métadonnées du trancheur. Ce n'est pas un réglage du trancheur ni quelque chose que vous avez modifié. Bambuddy revient chercher le fichier trois fois au cours des dix minutes suivantes, la plupart de ces cas se règlent donc d'eux-mêmes ; une carte toujours vide signifie que chacune de ces tentatives a également dépassé le temps imparti. Si cela se reproduit, augmentez Délai de connexion dans Paramètres > Réseau > Nouvelle tentative FTP.`,dismissLabel:`Ignorer ce message`},searchPlaceholder:`Chercher dans les archives...`,filterByPrinter:`Par imprimante`,filterByStatus:`Par statut`,sortBy:`Trier par`,sortNewest:`Plus récent`,sortOldest:`Plus ancien`,sortName:`Nom`,sortDuration:`Durée`,sortLargest:`Plus volumineux`,sortSmallest:`Plus léger`,sortSize:`Taille`,noArchives:`Aucune archive trouvée`,noArchivesSearch:`Aucune archive ne correspond`,originalPrintNotVisible:`Impression d'origine non visible - essayez d'effacer les filtres`,noArchivesYet:`Pas encore d'archive`,prints:`impressions`,pagination:{showing:`Affichage`,to:`à`,of:`sur`,show:`Afficher`,page:`Page`,all:`Tout`},loadingArchives:`Chargement...`,releaseToUpload:`Relâcher pour téléverser`,showAll:`Tout afficher`,showFavoritesOnly:`Favoris uniquement`,gridView:`Grille`,listView:`Liste`,calendarView:`Calendrier`,logView:`Journal d'impression`,manageTags:`Gérer les tags`,showFailedPrints:`Afficher les échecs`,hideFailedPrints:`Masquer les échecs`,hideDuplicates:`Masquer les doublons`,viewOriginalPrint:`Cliquez pour afficher l'impression originale (#{{id}})`,printTime:`Temps d'impression`,filamentUsed:`Filament utilisé`,cost:`Coût`,preview:`Aperçu`,deleteArchive:`Supprimer l'archive`,deleteConfirm:`Supprimer cette archive ?`,favorite:`Favori`,unfavorite:`Retirer des favoris`,viewDetails:`Détails`,status:{completed:`Réussi`,failed:`Échoué`,stopped:`Arrêté`},toast:{source3mfAttached:`Source 3MF attachée : {{filename}}`,failedUploadSource3mf:`Échec téléversement 3MF`,source3mfRemoved:`Source 3MF retirée`,failedRemoveSource3mf:`Échec retrait 3MF`,f3dAttached:`F3D attaché : {{filename}}`,failedUploadF3d:`Échec téléversement F3D`,f3dRemoved:`F3D retiré`,failedRemoveF3d:`Échec retrait F3D`,timelapseAttached:`Timelapse attaché : {{filename}}`,timelapseAlreadyAttached:`Timelapse déjà présent`,noMatchingTimelapse:`Pas de timelapse correspondant`,failedScanTimelapse:`Échec scan timelapse`,failedAttachTimelapse:`Échec attache timelapse`,timelapseRemoved:`Timelapse supprimé`,failedRemoveTimelapse:`Échec de la suppression du timelapse`,timelapseUploaded:`Timelapse importé : {{filename}}`,failedUploadTimelapse:`Échec de l'importation du timelapse`,archiveDeleted:`Archive supprimée`,failedDeleteArchive:`Échec suppression`,addedToFavorites:`Ajouté aux favoris`,removedFromFavorites:`Retiré des favoris`,projectUpdated:`Projet mis à jour`,failedUpdateProject:`Échec mise à jour projet`,linkCopied:`Lien copié`,failedCopyLink:`Échec copie lien`,photoDeleted:`Photo supprimée`,failedDeletePhoto:`Échec suppression photo`,failedDeleteArchives:`Échec suppression archives`,failedUpdateFavorites:`Échec mise à jour favoris`,exportDownloaded:`Export téléchargé`,exportFailed:`Échec export`},menu:{print:`Imprimer`,openInBambuStudio:`Ouvrir dans le Slicer`,slice:`Découper`,externalLink:`Lien externe`,viewOnMakerWorld:`Voir sur MakerWorld`,preview3d:`Aperçu 3D`,viewTimelapse:`Voir le Timelapse`,scanForTimelapse:`Scanner pour Timelapse`,uploadTimelapse:`Importer un timelapse`,removeTimelapse:`Supprimer le timelapse`,downloadSource3mf:`Télécharger Source 3MF`,uploadSource3mf:`Téléverser Source 3MF`,replaceSource3mf:`Remplacer Source 3MF`,removeSource3mf:`Retirer Source 3MF`,uploadF3d:`Téléverser F3D`,replaceF3d:`Remplacer F3D`,downloadF3d:`Télécharger F3D`,removeF3d:`Retirer F3D`,download:`Télécharger`,copyDownloadLink:`Copier lien de téléchargement`,qrCode:`Code QR`,viewPhotos:`Voir les photos`,viewPhotosCount:`Voir les photos ({{count}})`,projectPage:`Page du Projet`,addToFavorites:`Ajouter aux favoris`,removeFromFavorites:`Retirer des favoris`,edit:`Modifier`,printLog:`Journal d'impression`,goToProject:`Aller au Projet : {{name}}`,addToProject:`Ajouter au Projet`,removeFromProject:`Retirer du Projet`,loading:`Chargement...`,noProjectsAvailable:`Aucun projet disponible`,searchProjects:`Rechercher des projets…`,select:`Sélectionner`,deselect:`Désélectionner`,delete:`Supprimer`},permission:{noReprint:`Pas d'autorisation de réimpression`,noAddToQueue:`Pas d'autorisation pour la file`,noUpdateArchives:`Pas d'autorisation de mise à jour`,noUploadFiles:`Pas d'autorisation de téléversement`,noDownload:`Pas d'autorisation de téléchargement`,noCopyLink:`Pas d'autorisation de copie lien`,noDelete:`Pas d'autorisation de suppression`,noEdit:`Pas d'autorisation de modification`,noCreate:`Pas d'autorisation de création`},platePicker:{title:`Choisir une plaque à prévisualiser`,hint:`Cette archive contient plusieurs plaques. Sélectionnez-en une pour l'ouvrir dans la visionneuse GCode.`,plateLabel:`Plaque {{index}}`,objectCount:`{{count}} objet`,objectCount_plural:`{{count}} objets`,noGcode:`Cette archive ne contient pas de G-code généré à prévisualiser. Ouvrez-la d'abord dans Bambu Studio pour la trancher.`},card:{previousPlate:`Plateau précédent`,nextPlate:`Plateau suivant`,plateNumber:`Plateau {{index}}`,moreOptions:`Clic droit pour plus d'options`,addToFavorites:`Ajouter aux favoris`,removeFromFavorites:`Retirer des favoris`,cancelled:`annulé`,failed:`échoué`,duplicate:`doublon`,duplicateTitle:`Ce modèle a déjà été imprimé`,openSource3mf:`Ouvrir 3MF dans Bambu Studio (clic droit pour plus)`,downloadF3d:`Télécharger fichier Fusion 360`,viewTimelapse:`Voir timelapse`,viewPhoto:`Voir 1 photo`,viewPhotos:`Voir {{count}} photos`,openFolder:`Ouvrir le dossier : {{name}}`,slicedFile:`Fichier découpé - prêt`,sourceFile:`Fichier source uniquement - pas de mapping AMS`,gcode:`GCODE`,source:`SOURCE`,project:`Projet : {{name}}`,runsBadge:`{{count}} impressions`,runsBadgeTitle:`{{count}} impressions au total — {{successful}} réussies, {{failed}} échouées. Cliquez pour voir le journal complet.`,estimated:`Estimé : {{time}}`,actual:`Réel : {{time}}`,accuracy:`Précision : {{percent}}%`,filament:`{{weight}} g`,layer:`{{count}} couche`,layers:`{{count}} couches`,object:`{{count}} objet`,objects:`{{count}} objets`,slicedFor:`Découpé pour {{model}}`,uploadedBy:`Téléversé par`,noPermissionReprint:`Pas d'autorisation de réimpression`,noFileForReprint:`Aucun fichier 3MF disponible — le fichier n'a pas pu être téléchargé depuis l'imprimante lors de l'enregistrement`,slicerAmsMapping:`Mappage AMS enregistré ({{printer}})`,slicerAmsMappingTooltip:`Le choix d'emplacement AMS du slicer a été enregistré pour {{printer}}. Les numéros d'emplacement n'ont de sens que sur cette imprimante : une réimpression ne les réutilise donc que si elle vise à nouveau {{printer}}.`,noPermissionEdit:`Pas d'autorisation de modification`,noPermissionDelete:`Pas d'autorisation de suppression`,openInBambuStudio:`Ouvrir dans le Slicer`,openInBambuStudioToSlice:`Ouvrir dans le Slicer pour découper`,slice:`Découper`,externalLink:`Lien externe`,makerWorld:`MakerWorld : {{designer}}`,viewProject:`Voir projet`,noExternalLink:`Aucun lien externe`,preview3d:`Aperçu 3D`,download:`Télécharger`,edit:`Modifier`,delete:`Supprimer`},runLog:{title:`Journal d'impression`,modalTitle:`Journal d'impression — {{name}}`,modalTitleFallback:`cette archive`,empty:`Aucun événement d'impression enregistré pour cette archive.`,col:{date:`Date`,status:`Statut`,duration:`Durée`,filament:`Filament`,cost:`Coût`},status:{completed:`Terminé`,failed:`Échoué`,cancelled:`Annulé`,stopped:`Arrêté`,skipped:`Ignoré`,printing:`Impression en cours`}},modal:{deleteArchive:`Supprimer l'archive`,deleteConfirm:`Supprimer "{{name}}" ? Cette action est irréversible.`,deleteButton:`Supprimer`,deletePurgeStats:`Retirer également cette impression des Quick Stats (filament, temps, coût, énergie)`,deleteQueueItemsWarning:`{{count}} élément(s) de file d'attente lié(s) à cette archive seront également supprimé(s).`,deleteBlockedByPrinting:`Suppression impossible — {{count}} élément(s) de file d'attente en cours d'impression. Arrêtez l'impression d'abord, puis réessayez.`,removeSource3mf:`Retirer Source 3MF`,removeSource3mfConfirm:`Retirer le fichier 3MF de "{{name}}" ?`,removeButton:`Retirer`,removeF3d:`Retirer F3D`,removeF3dConfirm:`Retirer le fichier Fusion 360 de "{{name}}" ?`,removeTimelapse:`Supprimer le timelapse`,removeTimelapseConfirm:`Êtes-vous sûr de vouloir supprimer la vidéo timelapse de "{{name}}" ?`,timelapse:`{{name}} – Timelapse`,selectTimelapse:`Choisir un Timelapse`,selectTimelapseDesc:`Sélectionnez manuellement le timelapse :`,deleteArchives:`Supprimer les archives`,deleteArchivesConfirm:`Supprimer {{count}} archive(s) ?`,deleteCount:`Supprimer {{count}}`},page:{title:`Archives`,printsCount:`{{filtered}} sur {{total}} impressions`,dropFilesHere:`Déposez les fichiers .3mf ici`,releaseToUpload:`Relâcher pour téléverser`,only3mfSupported:`Seuls les fichiers .3mf sont supportés`,close:`Fermer`,selected:`{{count}} sélectionnés`,selectAll:`Tout sélectionner`,tags:`Étiquettes`,project:`Projet`,favorite:`Favori`,delete:`Supprimer`,toggledFavorites:`Favoris mis à jour pour {{count}} archive(s)`,failedUpdateFavorites:`Échec mise à jour favoris`,archivesDeleted:`{{count}} archive(s) supprimée(s)`,failedDeleteArchives:`Échec suppression`,photoDeleted:`Photo supprimée`,failedDeletePhoto:`Échec suppression photo`},list:{name:`Nom`,printer:`Imprimante`,date:`Date`,size:`Taille`,actions:`Actions`,hasTimelapse:`A un timelapse`},log:{date:`Date`,printName:`Nom de l'impression`,printer:`Imprimante`,user:`Utilisateur`,status:`Statut`,duration:`Durée`,filament:`Filament`,filamentUsed:`Filament utilisé`,cost:`Coût`,energy:`Énergie`,energyCost:`Coût énergétique`,completedAt:`Terminé`,columns:`Colonnes`,sortBy:`Trier par {{column}}`,allPrinters:`Toutes les imprimantes`,allUsers:`Tous les utilisateurs`,allStatuses:`Tous les statuts`,cancelled:`Annulé`,skipped:`Ignoré`,dateFrom:`Du`,dateTo:`Au`,noEntries:`Aucune entrée de journal trouvée`,showing:`{{count}} sur {{total}} entrées`,rowsPerPage:`Lignes`,page:`Page`,prev:`Préc.`,next:`Suiv.`,clearLog:`Effacer le journal`,clearLogTitle:`Effacer le journal d'impression`,clearLogConfirm:`Toutes les entrées du journal d'impression seront supprimées définitivement. Les archives et les éléments de file d'attente ne sont pas affectés. Cette action est irréversible. Êtes-vous sûr ?`,clearLogButton:`Tout effacer`,cleared:`{{count}} entrées de journal effacées`,clearFailed:`Échec de l'effacement du journal d'impression`,deleteEntryTitle:`Supprimer l'entrée du journal d'impression`,deleteEntryConfirm:`Cette entrée sera retirée du journal et ses contributions en filament, temps et coût disparaîtront des statistiques rapides. L'archive correspondante (le cas échéant) n'est pas affectée. Cette action est irréversible.`,entryDeleted:`Entrée du journal d'impression supprimée`,entryDeleteFailed:`Échec de la suppression de l'entrée du journal d'impression`,editEntryTitle:`Modifier l'entrée du journal d'impression`,editEntryDescription:`Classez cette impression. Le widget Analyse des échecs regroupe par ces valeurs, ce qui répercute immédiatement la mise à jour dans les statistiques.`,entryUpdated:`Entrée du journal mise à jour`,entryUpdateFailed:`Échec de la mise à jour de l'entrée du journal`,statuses:{completed:`Terminée`,failed:`Échouée`,stopped:`Arrêtée`,cancelled:`Annulée`,skipped:`Ignorée`}}},dispatchToast:{untitled:`Tâche d'impression`,startingPrints:`Démarrage des impressions`,progressSummary:`{{complete}}/{{total}} terminées • En cours : {{processing}}`,expandDetails:`Afficher les détails de l'envoi`,collapseDetails:`Masquer les détails de l'envoi`,awaitingPrinter:`En attente de l'imprimante…`,status:{processing:`En cours`,completed:`Terminée`,failed:`Échouée`},failed:{generic:`Échec de l'envoi`,upload_failed:`Échec du téléversement vers l'imprimante`,start_command_failed:`L'imprimante a rejeté la commande de démarrage`},dismiss:`Fermer`},pipelineRuns:{title:`Exécutions de pipeline`,loading:`Chargement…`,empty:`Aucune exécution de pipeline pour le moment.`,filter:{pipeline:`Pipeline`,status:`Statut`,target:`Cible`,all:`Toutes`,allPipelines:`Tous les pipelines`,allStatus:`Tous les statuts`,allTargets:`Toutes les cibles`,clear:`Effacer les filtres`,noMatches:`Aucune exécution ne correspond aux filtres actuels.`},totalCount_one:`{{n}} exécution`,totalCount_other:`{{n}} exécutions`,copies:`{{n}} copies`,failedCount:`{{n}} échouées`,copyN:`Copie {{n}}`,retryFailed:`Réessayer les échouées`,retryOf:`réessai de #{{n}}`,pagination:`{{start}}–{{end}} sur {{total}}`,toast:{cancelled:`Exécution annulée`,cancelFailed:`Annulation échouée`,retryStarted:`Réessai démarré`,retryFailed:`Réessai échoué`,cleared:`{{n}} exécutions effacées`,clearFailed:`Échec de l'effacement`},clearLog:`Effacer le journal`,clearConfirmTitle:`Effacer le journal ?`,clearConfirmBody:`Supprimer toutes les exécutions de pipeline terminées, échouées, annulées et en échec partiel ? Les exécutions en cours sont conservées. Ceci ne peut pas être annulé.`,clearConfirmAction:`Effacer`,jobStatus:{pending:`en attente`,awaiting_printer:`attente imprimante`,queued:`en file`,printing:`impression`,completed:`terminée`,failed:`échouée`,cancelled:`annulée`},cancelledByUser:`Annulé par l'utilisateur`},queue:{filamentShort:{rowBadge:`Filament insuffisant pour la bobine assignee`,rowTooltip:`Le planificateur a signale cet element. Cliquez sur Lecture pour voir le deficit par emplacement et decider de lancer quand meme l'impression.`,confirmTitle:`Filament insuffisant`,confirmIntro:`La bobine assignee ne peut pas couvrir au moins un emplacement. Imprimer quand meme ?`,lineItem:`Emplacement {{slot}} : besoin de {{required}} g, {{remaining}} g restants`,unknown:`inconnu`,printAnyway:`Imprimer quand meme`},slicerAmsMapping:{rowBadge:`Emplacements AMS enregistrés pour cette imprimante`,rowTooltip:`Cette archive conserve les emplacements AMS exacts choisis par le slicer, enregistrés pour l'imprimante de cet élément. Une réimpression dessus peut réutiliser ces bobines au lieu de refaire la correspondance par type et couleur.`},title:`File d'attente`,subtitle:`Gérez vos travaux d'impression`,editQueueItem:`Modifier l'élément`,selectAllPlates:`Sélectionner les {{count}} plaques`,deselectAll:`Tout désélectionner`,printQueued:`Impression ajoutée à la file`,printQueuedWillStartWhenIdle:`Démarrera lorsque l'imprimante sera inactive`,itemsQueued:`{{count}} éléments ajoutés à la file`,sending:`Envoi...`,sendingProgress:`Envoi {{current}}/{{total}}...`,adding:`Ajout...`,addingProgress:`Ajout {{current}}/{{total}}...`,savingProgress:`Enregistrement {{current}}/{{total}}...`,clearQueue:`Vider la file`,clearHistory:`Effacer l'historique`,emptyQueue:`La file est vide`,position:`Position`,scheduledTime:`Heure prévue`,moveUp:`Monter`,moveDown:`Descendre`,startNow:`Démarrer maintenant`,printingInProgress:`Impression en cours...`,viewArchive:`Voir l'archive`,viewInFileManager:`Voir dans le gestionnaire`,itemCount:`{{count}} élément`,itemCount_plural:`{{count}} éléments`,dragToReorder:`Glisser pour réordonner (ASAP uniquement)`,reorderHint:`La position n'affecte que les éléments ASAP.`,sjf:{label:`SJF`,tooltip:`Travail le plus court en premier — le planificateur priorise les impressions plus courtes`},addedBy:`Ajouté par {{name}}`,nextInQueue:`Prochain en file`,clearPlateSuccess:`Plateau vidé — prêt pour l'impression suivante`,plateNumber:`Plateau {{index}}`,quantity:`Quantité`,quantityHint:`Crée {{count}} éléments de file d'attente`,plateQuantityLabel:`Impressions de {{plate}}`,plateQuantityTotal_one:`{{count}} impression au total`,plateQuantityTotal_other:`{{count}} impressions au total`,batchOrders:{title:`Commandes par lot`,emptyTitle:`Aucune commande par lot`,emptyDescription:`Mettez en file un fichier multi-plateaux, ou plusieurs copies d'un plateau, et la commande apparaît ici avec son avancement.`,filter:{active:`Actives`,completed:`Terminées`,cancelled:`Annulées`,all:`Toutes`},status:{active:`Active`,completed:`Terminée`,cancelled:`Annulée`},noTargets:`Regroupement seul`,noTargetsHint:`Créée avant les quantités par plateau : elle suit les impressions mises en file plutôt qu'un objectif.`,dispatchRemaining:`Mettre en file les {{count}} restantes`,dispatchPlate:`Mettre le reste en file`,strandedPlate:`Aucun réglage à copier`,strandedNotice:`Impossible de mettre en file {{runs}} des {{owed}} impressions encore dues : aucune impression en file ou terminée ne subsiste pour cette plaque, donc plus aucun réglage à copier. Mettez la plaque en file une fois depuis le fichier, ou annulez la commande.`,dispatched:`Impressions restantes mises en file pour {{name}}`,plateProgress:`{{completed}} sur {{target}} faites`,remaining:`{{count}} encore dues`,failed:`{{count}} échouées`,printing:`{{count}} en cours`,wholeFile:`Fichier entier`,due:`Échéance {{date}}`,costSoFar:`{{amount}} à ce jour`,costRemaining:`({{amount}} à venir)`},activeBatches:`Lots actifs`,batchProgress:`{{completed}} sur {{total}} terminés`,cancelBatch:`Annuler les restants`,batchCancelled:`Éléments restants du lot annulés`,cancelBatchConfirmTitle:`Annuler le lot`,cancelBatchConfirmMessage:`Clôturer cette commande ? Les impressions encore en file sont annulées, et elle cesse de réclamer ce qui n'a pas été produit.`,batch:{defaultName:`Lot`,label:`{{count}} élément`,label_plural:`{{count}} éléments`,pendingCount:`{{count}} en attente`,pendingCount_plural:`{{count}} en attente`,expand:`Développer le lot`,collapse:`Réduire le lot`,groupAsBatch:`Grouper en lot…`,groupAsBatchDescription:`Combiner les {{count}} éléments sélectionnés en un seul lot repliable.`,nameLabel:`Nom du lot`,namePlaceholder:`p. ex. Cadeaux du vendredi`,create:`Créer le lot`,ungroup:`Dégrouper`,ungroupConfirmTitle:`Dégrouper le lot ?`,ungroupConfirmMessage:`Les éléments resteront dans la file mais ne seront plus groupés.`,dragGroup:`Faire glisser le groupe`},tabs:{batches:`Lots`,queue:`File`,history:`Historique`,timeline:`Chronologie`,pipelines:`Exécutions`},layout:{flatList:`Liste`,byPrinter:`Par imprimante`,groupByPrinter:`Grouper par imprimante`},history:{emptyTitle:`Aucun historique`,emptyDescription:`Les impressions terminées, annulées et échouées apparaîtront ici.`,showMore:`Afficher plus`,showingCount:`Affichage de {{shown}} sur {{total}}`},dragGhost:{multiCount:`{{count}} éléments`,batch:`{{name}} ({{count}} copie)`,batch_plural:`{{name}} ({{count}} copies)`},sections:{currentlyPrinting:`En cours`,queued:`En attente`,history:`Historique`},status:{pending:`En attente`,waiting:`En attente`,printing:`Impression`,paused:`En pause`,completed:`Terminé`,failed:`Échoué`,skipped:`Sauté`,cancelled:`Annulé`},summary:{printing:`Impressions`,queued:`En attente`,totalTime:`Temps total estimé`,totalWeight:`Poids total estimé`,history:`Historique`},filter:{allPrinters:`Toutes les imprimantes`,unassigned:`Non assigné`,allStatus:`Tous les statuts`,allLocations:`Tous les emplacements`,any:`Tout`},sort:{byPosition:`Par position`,byName:`Par nom`,byPrinter:`Par imprimante`,bySchedule:`Par planification`,byDate:`Par date`,ascendingOldest:`Croissant (plus vieux)`,descendingNewest:`Décroissant (plus récent)`},badges:{staged:`Préparé`,requiresPrevious:`Nécessite succès précédent`,autoPowerOff:`Extinction auto`,gcodeInjection:`G-code`},empty:{title:`Aucune impression prévue`,description:`Planifiez depuis les Archives ou glissez des fichiers ici.`},time:{etaIfStartedNow:`Heure de fin si cette tâche démarrait maintenant`,whenFree:`Dès qu'une imprimante est libre`,overdue:`En retard`,now:`Maintenant`,lessThanMinute:`Dans moins d'une minute`,inMinutes:`Dans {{count}} min`,inHours:`Dans {{count}} heures`},actions:{startPrint:`Démarrer`,stopPrint:`Arrêter`,requeue:`Remettre en file`},bulkEdit:{title:`Modifier {{count}} élément`,title_plural:`Modifier {{count}} éléments`,description:`Seuls les changements seront appliqués.`,printer:`Imprimante`,noChange:`— Aucun changement —`,queueOptions:`Options de file`,staged:`Préparé (manuel)`,autoPowerOff:`Extinction auto après`,requirePrevious:`Requiert succès précédent`,gcodeInjection:`Injecter le G-code`,printOptions:`Options d'impression`,bedLevelling:`Nivellement plateau`,flowCalibration:`Calibration débit`,vibrationCalibration:`Vibration (Input Shaper)`,layerInspection:`Inspection 1ère couche`,timelapse:`Time-lapse`,useAms:`Utiliser AMS`,nozzleOffsetCali:`Calibration du décalage des buses`,applyChanges:`Appliquer`,selectAll:`Tout sélectionner`,deselectAll:`Tout désélectionner`,selected:`{{count}} sélectionnés`,editSelected:`Modifier la sélection`,cancelSelected:`Annuler la sélection`},confirm:{cancelTitle:`Annuler l'impression prévue`,cancelMessage:`Annuler "{{name}}" ?`,stopTitle:`Arrêter l'impression`,stopMessage:`Arrêter "{{name}}" sur l'imprimante ?`,removeTitle:`Retirer de l'historique`,removeMessage:`Retirer "{{name}}" de l'historique ?`,clearHistoryTitle:`Effacer l'historique`,clearHistoryMessage:`Retirer les {{count}} éléments ?`,cancelButton:`Annuler l'impression`,stopButton:`Arrêter l'impression`,thisPrint:`cette impression`,thisItem:`cet élément`},toast:{cancelled:`Élément annulé`,cancelFailed:`Échec annulation`,removed:`Élément retiré`,keptForOrder:`Annulé au lieu d'être retiré : cette impression est la seule dont la commande peut remettre cette plaque en file`,historyKeptForOrders:`{{kept}} conservées car des commandes en ont encore besoin.`,removeFailed:`Échec retrait`,stopped:`Impression arrêtée`,stopFailed:`Échec arrêt`,released:`Libéré dans la file`,startFailed:`Échec démarrage`,reorderFailed:`Échec réorganisation`,historyCleared:`{{count}} éléments effacés`,clearHistoryFailed:`Échec effacement`,updateFailed:`Échec mise à jour`,bulkCancelled:`{{count}} éléments annulés`,bulkCancelFailed:`Échec annulation`,batchCreated:`Lot « {{name}} » créé`,batchCreateFailed:`Échec de la création du lot`,batchUngrouped:`{{count}} élément(s) dégroupé(s)`,batchUngroupFailed:`Échec du dégroupement du lot`,resumedAfterFailure:`File reprise — {{restored}} tâche(s) restaurée(s) en attente`,resumeAfterFailureFailed:`Échec de la reprise de la file`},resumeAfterFailure:{banner:`{{printer}} est bloquée par un échec d'impression précédent — {{count}} tâche(s) ignorée(s)`,bannerHint:`Résolvez le problème de l'imprimante, puis reprenez la file pour restaurer les tâches ignorées et lever le blocage.`,button:`Reprendre après échec`,confirmTitle:`Reprendre la file après l'échec ?`,confirmMessage:`Restaurer {{count}} tâche(s) ignorée(s) sur {{printer}} en attente et lever le blocage de l'impression précédente. Assurez-vous que l'imprimante est prête avant de continuer.`},timeline:{listView:`Liste`,timelineView:`Chronologie`,unassigned:`Non attribué`,noData:`Aucune impression planifiée pour ce jour`,nothingCommitted:`Aucun horaire confirmé dans cette fenêtre. Les éléments en attente d’action, les éléments bloqués et les jobs ASAP sur des imprimantes inactives ne sont pas affichés — définissez une heure planifiée ou libérez un élément en attente pour qu’il apparaisse ici.`,allDoneBy:`Toutes les impressions terminées vers {{time}}`,staged:`En attente`,filterAll:`Tout afficher`,filterPrinting:`En cours`,filterQueued:`En file`,time:{anyMoment:`imminent`,minutesLeft:`{{minutes}}m restantes`,hoursLeft:`{{hours}}h restantes`,hoursMinutesLeft:`{{hours}}h {{minutes}}m restantes`},day:{previous:`Jour précédent`,next:`Jour suivant`,today:`Aujourd'hui`},window:{back12h:`Reculer de 12 heures`,forward12h:`Avancer de 12 heures`,now:`Maintenant`},printerColumnHeader:`Imprimante`},permissions:{noStopPrint:`Pas d'autorisation d'arrêt`,noStartPrint:`Pas d'autorisation de démarrage`,noEdit:`Pas d'autorisation de modification`,noCancel:`Pas d'autorisation d'annulation`,noRequeue:`Pas d'autorisation de remise en file`,noRemove:`Pas d'autorisation de retrait`,noClearHistory:`Pas d'autorisation historique`,noEditItems:`Pas d'autorisation modification groupée`,noCancelItems:`Pas d'autorisation annulation groupée`}},stats:{title:`Statistiques`,subtitle:`Glissez les widgets pour réorganiser. Cliquez sur l'œil pour masquer.`,overview:`Vue d'ensemble`,totalPrints:`Total impressions`,successRate:`Taux de succès`,totalPrintTime:`Temps total d'impression`,printTime:`Temps d'impression`,totalFilament:`Total filament utilisé`,filamentUsed:`Filament utilisé`,filamentCost:`Coût filament`,totalCost:`Coût total`,energyUsed:`Énergie consommée`,energyCost:`Coût énergie`,energyWarmingUpTooltip:`Le suivi énergétique collecte encore des instantanés horaires. Les totaux par période deviendront précis dès qu’un instantané existera avant la plage sélectionnée. Les premières valeurs peuvent être sous-estimées.`,averagePrintTime:`Temps moyen par impression`,printsPerDay:`Impressions par jour`,byPrinter:`Par imprimante`,printsByPrinter:`Impressions par imprimante`,byMaterial:`Par matériau`,byMonth:`Par mois`,last7Days:`7 derniers jours`,last30Days:`30 derniers jours`,last90Days:`90 derniers jours`,allTime:`Tout le temps`,quickStats:`Stats rapides`,printActivity:`Activité d'impression`,filamentTypes:`Types de filament`,filamentTrends:`Tendances filament`,failureAnalysis:`Analyse des échecs`,timeAccuracy:`Précision du temps`,successful:`Succès :`,failed:`Échecs :`,cancelled:`Annulés :`,perfectEstimate:`100% = estimation parfaite`,noTimeAccuracyData:`Pas encore de données de précision`,noFilamentData:`Aucune donnée de filament`,noPrinterData:`Aucune donnée d'imprimante`,noPrintData:`Aucune donnée d'impression`,noPrintDataLast30Days:`Aucune impression ces 30 derniers jours`,failureReasons:`Raisons des échecs`,topFailureReasons:`Top raisons d'échec`,failedPrintsCount:`{{failed}} / {{total}} impressions ont échoué`,lastWeekRate:`Semaine dernière : {{rate}}%`,resetLayout:`Réinitialiser la mise en page`,recalculateCosts:`Recalculer les coûts`,recalculateCostsHint:`Recalcule les coûts avec les prix actuels des filaments`,exportStats:`Exporter les stats`,exportAsCsv:`Exporter en CSV`,exportAsExcel:`Exporter en Excel`,hiddenCount:`{{count}} Masqués`,exportDownloaded:`Export téléchargé`,exportFailed:`Échec export`,layoutReset:`Mise en page réinitialisée`,recalculatedCosts:`Coûts recalculés pour {{count}} archives`,recalculateFailed:`Échec du calcul`,loadingStats:`Chargement des statistiques...`,noPermissionResetLayout:`Pas d'autorisation de réinitialisation`,noPermissionRecalculate:`Pas d'autorisation de recalcul`,noPrintDataInRange:`Aucune donnée dans la période sélectionnée`,periodFilament:`Filament utilisé`,periodCost:`Coût`,avgPerPrint:`Moy. par impression`,usageOverTime:`Utilisation dans le temps`,energyOverTime:`Énergie dans le temps`,filamentByWeight:`Poids`,printDuration:`Durée d'impression`,printerUtilization:`Utilisation imprimante`,filamentSuccess:`Succès par matériau`,printHabits:`Habitudes d'impression`,printTimeOfDay:`Heure d'impression`,colorDistribution:`Distribution des couleurs`,noColorData:`Aucune donnée de couleur disponible`,records:`Enregistrements`,longestPrint:`Plus longue impression`,heaviestPrint:`Plus lourde impression`,mostExpensivePrint:`Plus chère`,busiestDay:`Jour le plus actif`,successStreak:`Série de succès`,streakPrint:`impression consécutive`,streakPrints:`{{count}} impressions consécutives`,printerStats:`Stats imprimante`,hours:`heures`,avgPrints:`Moy. impressions`,noArchiveData:`Aucune donnée d'impression disponible`,filamentByTime:`Temps`,avgWeight:`Moy. poids`,avgTime:`Moy. temps`,filamentByPrints:`Impressions`,timeframe:{today:`Aujourd'hui`,"this-week":`Cette semaine`,"this-month":`Ce mois`,"last-7":`7 derniers jours`,"last-30":`30 derniers jours`,"last-90":`90 derniers jours`,"this-year":`Cette année`,"all-time":`Tout`,custom:`Personnalisé`,from:`Du`,to:`Au`},allUsers:`Tous les utilisateurs`,noUser:`Aucun utilisateur (Système)`,filterByUser:`Filtrer par utilisateur`},maintenance:{title:`Maintenance`,overview:`Vue d'ensemble`,allOk:`Toute la maintenance est à jour`,dueCount:`{{count}} tâche à faire`,dueCount_plural:`{{count}} tâches à faire`,warningCount:`{{count}} avertissement`,warningCount_plural:`{{count}} avertissements`,totalPrintTime:`Temps d'impression total`,nextMaintenance:`Prochaine maintenance`,nothingDue:`Rien de prévu`,tasks:`Tâches`,lastPerformed:`Dernière réalisation`,interval:`Intervalle`,hoursRemaining:`{{hours}}h restantes`,hoursOverdue:`{{hours}}h de retard`,markDone:`Marquer comme fait`,performMaintenance:`Effectuer la maintenance`,history:`Historique`,noHistory:`Aucun historique`,editPrintHours:`Modifier les heures d'impression`,currentHours:`Heures actuelles`,statusTab:`Statut`,settingsTab:`Paramètres`,overdueCount:`{{count}} en retard`,dueSoonCount:`{{count}} bientôt`,dueSoon:`Bientôt`,allGood:`Tout va bien`,overdueBy:`Retard de {{duration}}`,dueIn:`Dans {{duration}}`,timeLeft:`{{duration}} restant`,day:`1 jour`,days:`{{count}} jours`,week:`1 semaine`,weeks:`{{count}} semaines`,month:`1 mois`,months:`{{count}} mois`,year:`1 an`,maintenanceTypes:`Types de maintenance`,maintenanceTypesDescription:`Types système et tâches personnalisées`,addCustomType:`Ajouter un type`,restoreDefaults:`Restaurer les tâches par défaut`,intervalType:`Type d'intervalle`,intervalValue:`Intervalle ({{type}})`,icon:`Icône`,documentationLink:`Lien documentation (optionnel)`,assignToPrinters:`Assigner aux imprimantes`,selectAtLeastOnePrinter:`Sélectionnez au moins une imprimante`,addType:`Ajouter le type`,custom:`Personnalisé`,printHours:`Heures d'impression`,calendarDays:`Jours calendaires`,exampleName:`ex: Remplacement filtre HEPA`,viewDocumentation:`Voir documentation`,timeBasedInterval:`Intervalle temporel`,intervalOverrides:`Exceptions d'intervalle`,intervalOverridesDescription:`Intervalles spécifiques par imprimante`,assignedToPrinters:`Assigné aux imprimantes :`,noPrintersAssigned:`Aucune imprimante assignée`,addPrinterShort:`Ajouter :`,printersAssignedClick:`{{count}} imprimante(s) assignée(s) - gérer`,removeFromPrinter:`Retirer de cette imprimante`,types:{lubricateCarbonRods:`Lubrifier les tiges carbone`,lubricateRails:`Lubrifier les rails linéaires`,cleanNozzle:`Nettoyer la buse / hotend`,checkBelts:`Vérifier la tension des courroies`,cleanBuildPlate:`Nettoyer le plateau`,checkExtruder:`Vérifier les engrenages de l'extrudeur`,checkCooling:`Vérifier les ventilateurs`,generalInspection:`Inspection générale`,cleanCarbonRods:`Nettoyer les tiges carbone`,lubricateSteelRods:`Lubrifier les tiges en acier`,cleanSteelRods:`Nettoyer les tiges en acier`,cleanLinearRails:`Nettoyer les rails linéaires`,checkPtfeTube:`Vérifier le tube PTFE`,replaceHepaFilter:`Remplacer le filtre HEPA`,replaceCarbonFilter:`Remplacer le filtre charbon`,lubricateLeftNozzleRail:`Lubrifier le rail de buse gauche`},maintenanceComplete:`Maintenance marquée comme faite`,typeUpdated:`Type mis à jour`,typeDeleted:`Type supprimé`,defaultsRestored:`{{count}} tâche(s) par défaut restaurée(s)`,printHoursUpdated:`Heures mises à jour`,printerAssigned:`Imprimante assignée`,printerRemoved:`Imprimante retirée`,deleteTypeConfirm:`Supprimer "{{name}}" ?`,deleteSystemTypeTitle:`Supprimer la tâche de maintenance par défaut ?`,deleteSystemTypeMessage:`Êtes-vous sûr de vouloir supprimer la tâche de maintenance par défaut "{{name}}" ?`,noPermissionUpdate:`Pas d'autorisation de mise à jour`,noPermissionPerform:`Pas d'autorisation d'action`,noPermissionEditTypes:`Pas d'autorisation de modification types`,noPermissionDeleteTypes:`Pas d'autorisation de suppression types`,noPermissionEditHours:`Pas d'autorisation de modification heures`,noPermissionRemovePrinter:`Pas d'autorisation retrait imprimante`,noPermissionAssignPrinter:`Pas d'autorisation assignation`,noPermissionEditIntervals:`Pas d'autorisation modification intervalles`,configureSettings:`Configurer types et intervalles`},settings:{sliceEngine:`Moteur de découpage`,sliceEngineSidecar:`Sidecar serveur`,sliceEngineSidecarHint:`Le découpage s'exécute sur le serveur, dans le conteneur sidecar du trancheur.`,sliceEngineBrowser:`Dans le navigateur`,sliceEngineBrowserHint:`Le découpage s'exécute sur cet appareil, sans serveur.`,title:`Paramètres`,general:`Général`,tabs:{general:`Général`,smartPlugs:`Prises connectées`,sensors:`Capteurs`,notifications:`Notifications`,queue:`Flux de travail`,queueDispatch:`File & Distribution`,queuePipelines:`Pipelines`,filament:`Filament`,network:`Réseau`,apiKeys:`Clés API`,virtualPrinter:`Imprimante virtuelle`,failureDetection:`Détection d'échec`,users:`Authentification`,backup:`Sauvegarde`,emailAuth:`Authentification Email`,ldap:`LDAP`,twoFa:`Authentification 2FA`,oidc:`SSO / OIDC`,security:`Sécurité`,spoolbuddy:`SpoolBuddy`},ldap:{title:`Authentification LDAP`,enabledDesc:`L'authentification LDAP est activée`,disabledDesc:`L'authentification LDAP est désactivée`,disabledHint:`Configurez et enregistrez les paramètres LDAP ci-dessous, puis activez.`,enabled:`Authentification LDAP activée`,disabled:`Authentification LDAP désactivée`,feature1:`Les utilisateurs peuvent se connecter avec leurs identifiants LDAP`,feature2:`Le compte administrateur local reste disponible en secours`,feature3:`Les groupes LDAP sont associés aux groupes BamBuddy à la connexion`,serverConfig:`Configuration du serveur LDAP`,serverUrl:`URL du serveur`,serverUrlHint:`Utilisez ldap:// pour standard ou ldaps:// pour les connexions SSL`,security:`Sécurité`,securityHint:`StartTLS met à niveau une connexion simple vers TLS. LDAPS utilise TLS dès le début.`,bindDn:`DN de liaison (compte de service)`,bindPassword:`Mot de passe de liaison`,searchBase:`DN de base de recherche`,userFilter:`Filtre de recherche utilisateur`,userFilterHint:`{username} est remplacé par le nom d'utilisateur. Utilisez (uid={username}) pour OpenLDAP.`,advanced:`Avancé`,autoProvision:`Provisionnement automatique`,autoProvisionHint:`Créer automatiquement un compte BamBuddy lors de la première connexion LDAP`,defaultGroup:`Groupe par défaut`,defaultGroupNone:`— Aucun (pas de repli) —`,defaultGroupHint:`Groupe de repli attribué lorsqu'un utilisateur LDAP s'authentifie mais n'est dans aucun groupe LDAP mappé. Laissez vide pour laisser les utilisateurs non mappés sans autorisations.`,groupMapping:`Mappage de groupes (JSON)`,groupMappingHint:`Associer les DN de groupes LDAP aux groupes BamBuddy. Groupes disponibles : `,testConnection:`Tester la connexion`,settingsSaved:`Paramètres LDAP enregistrés`,errors:{serverRequired:`L'URL du serveur LDAP est requise`,searchBaseRequired:`Le DN de base de recherche est requis`,enableAuthFirst:`Activez d'abord l'authentification`,configureLdapFirst:`Enregistrez d'abord les paramètres LDAP`}},email:{smtpSettings:`Configuration SMTP`,smtpHost:`Serveur SMTP`,smtpPort:`Port SMTP`,security:`Sécurité`,authentication:`Authentification`,username:`Utilisateur`,password:`Mot de passe`,fromEmail:`Email expéditeur`,fromName:`Nom expéditeur`,testConnection:`Tester la connexion SMTP`,testRecipient:`Email test destinataire`,sendTest:`Envoyer email test`,sending:`Envoi...`,save:`Enregistrer les paramètres`,saving:`Enregistrement...`,advancedAuth:`Authentification avancée`,advancedAuthEnabled:`L'authentification avancée est activée`,advancedAuthEnabledDesc:`La gestion des utilisateurs par email est active. Les nouveaux utilisateurs recevront un mot de passe auto-généré.`,advancedAuthDisabled:`Authentification avancée désactivée`,advancedAuthDisabledDesc:`Activez pour les fonctionnalités liées à l'email (mot de passe oublié, etc).`,enable:`Activer`,disable:`Désactiver`,feature1:`Génération auto et envoi de mots de passe par email`,feature2:`Connexion par utilisateur ou email`,feature3:`Réinitialisation mot de passe oublié disponible`,feature4:`Réinitialisation admin par email`,errors:{requiredFields:`Remplissez tous les champs requis`,usernameRequired:`L'utilisateur est requis pour l'authentification`,enterTestEmail:`Entrez une adresse email de test`,smtpServerAndEmail:`Serveur et expéditeur requis pour le test`,usernamePasswordRequired:`Utilisateur et mot de passe requis pour l'auth`,configureSmtpFirst:`Configurez et testez le SMTP d'abord`,enableAuthFirst:`Veuillez d'abord activer l'authentification pour utiliser les fonctionnalités basées sur le courrier électronique.`},success:{settingsSaved:`Paramètres SMTP enregistrés`},securityOptions:{starttls:`STARTTLS (Port 587)`,ssl:`SSL/TLS (Port 465)`,none:`Aucun (Port 25)`},authOptions:{enabled:`Activée`,disabled:`Désactivée`}},appearance:`Apparence`,notifications:`Notifications`,smartPlugs:`Prises connectées`,spoolman:`Spoolman`,updates:`Mises à jour`,language:`Langue`,languageDescription:`Choisissez votre langue`,theme:`Thème`,themeLight:`Clair`,themeDark:`Sombre`,themeSystem:`Système`,defaultView:`Vue par défaut`,defaultViewDescription:`Page affichée au démarrage`,checkForUpdates:`Vérifier les mises à jour`,autoUpdate:`Mise à jour auto`,currentVersion:`Version actuelle`,latestVersion:`Dernière version`,upToDate:`Bambuddy est à jour`,updateAvailable:`Mise à jour disponible`,notificationLanguage:`Langue des notifications`,notificationLanguageDescription:`Langue pour les notifications push`,bedCooledThreshold:`Seuil de refroidissement du plateau`,bedCooledThresholdDescription:`Température en dessous de laquelle le plateau est considéré comme refroidi`,userNotificationsEnabled:`Notifications utilisateur`,userNotificationsEnabledDescription:`Active le menu de notifications utilisateur et les notifications par e-mail pour les événements d'impression. Nécessite l'authentification avancée.`,userNotificationsDisabledHint:`Activez l'authentification avancée pour utiliser les notifications utilisateur.`,notificationProviders:`Fournisseurs de notifications`,addProvider:`Ajouter un fournisseur`,editProvider:`Modifier le fournisseur`,providerType:`Type de fournisseur`,testNotification:`Tester la notification`,testSuccess:`Notification de test envoyée`,testFailed:`Échec de l'envoi du test`,quietHours:`Heures de silence`,quietHoursDescription:`Ne pas déranger pendant ces heures`,quietHoursStart:`Début`,quietHoursEnd:`Fin`,events:{title:`Événements de notification`,printStart:`Impression démarrée`,printComplete:`Impression terminée`,printFailed:`Impression échouée`,printStopped:`Impression arrêtée`,printProgress:`Jalons de progression`,printProgressDescription:`Notifier à 25%, 50%, 75%`,printerOffline:`Imprimante hors ligne`,printerError:`Erreur imprimante`,filamentLow:`Filament bas`,maintenanceDue:`Maintenance due`,maintenanceDueDescription:`Notifier quand une tâche est due`},smartPlug:{title:`Prises connectées`,add:`Ajouter une prise`,edit:`Modifier la prise`,name:`Nom`,ipAddress:`Adresse IP`,linkedPrinter:`Imprimante liée`,autoOn:`Allumage auto`,autoOnDescription:`Allumer au début de l'impression`,autoOff:`Extinction auto`,autoOffDescription:`Éteindre après l'impression`,offDelay:`Délai d'extinction`,offDelayMinutes:`Minutes après fin`,offDelayTemp:`Quand la buse est sous`,currentState:`État actuel`,turnOn:`Allumer`,turnOff:`Éteindre`},filamentTracking:`Suivi de Filament`,filamentTrackingDesc:`Choisissez comment suivre vos bobines. Utilisez l'inventaire intégré ou connectez un serveur Spoolman.`,autoAddUnknownRfid:`Ajouter automatiquement les bobines RFID inconnues`,autoAddUnknownRfidDesc:`Crée automatiquement une entrée d'inventaire lorsqu'une bobine avec un tag RFID inconnu est détectée. Désactivez si vous enregistrez manuellement les nouvelles bobines à l'avance pour éviter les doublons.`,filamentChecks:`Vérifications du filament`,disableFilamentWarnings:`Désactiver les avertissements de filament`,disableFilamentWarningsDesc:`Ne pas afficher les avertissements de filament insuffisant lors de l'impression ou de la mise en file d'attente`,preferLowestFilament:`Préférer le filament le plus bas`,preferLowestFilamentDesc:`Lorsque plusieurs bobines correspondent, utiliser celle avec le moins de filament restant`,preferLowestFilamentBackupNote:`Ne prend effet que si AMS Filament Backup est activé sur l'imprimante — sinon, l'imprimante ne peut pas basculer vers une seconde bobine quand celle choisie est vide.`,trackingModeBuiltIn:`Inventaire Intégré`,trackingModeBuiltInDesc:`Correspondance RFID et suivi de consommation inclus`,trackingModeSpoolmanDesc:`Serveur de gestion externe`,builtInFeatureRfid:`Détecte auto les bobines RFID Bambu Lab dans l'AMS`,builtInFeatureUsage:`Suit la consommation par impression`,builtInFeatureCatalog:`Gère bobines, couleurs et profils facteur K`,builtInFeatureThirdParty:`Les bobines tierces peuvent être assignées aux bobines d'inventaire`,amsSyncButton:`Synchroniser les poids depuis l'AMS`,amsSyncTitle:`Synchroniser les poids des bobines depuis l'AMS`,amsSyncMessage:`Tous les poids des bobines de l'inventaire seront écrasés par les valeurs actuelles de l'AMS des imprimantes connectées. Utilisez ceci pour récupérer des données de poids corrompues. Les imprimantes doivent être en ligne.`,amsSyncing:`Synchronisation...`,amsSyncSuccess:`{{synced}} bobine(s) synchronisée(s), {{skipped}} ignorée(s)`,amsSyncError:`Échec de la synchronisation des poids depuis l'AMS`,spoolmanAmsSyncButton:`Synchroniser les poids Spoolman depuis l'AMS`,spoolmanAmsSyncTitle:`Synchroniser les poids des bobines Spoolman depuis l'AMS`,spoolmanAmsSyncMessage:`Cela mettra à jour les poids des bobines Spoolman en fonction des valeurs de remplissage AMS actuelles des imprimantes connectées. Les imprimantes doivent être en ligne.`,spoolmanAmsSyncing:`Synchronisation...`,spoolmanAmsSyncSuccess:`{{synced}} bobine(s) synchronisée(s), {{skipped}} ignorée(s)`,spoolmanAmsSyncError:`Échec de la synchronisation des poids Spoolman depuis l'AMS`,spoolmanAmsSyncErrorUnreachable:`Échec de la synchronisation (Spoolman inaccessible)`,spoolmanAmsSyncErrorNotConfigured:`Échec de la synchronisation (Spoolman non configuré)`,spoolmanNotConfigured:`Spoolman non configuré`,spoolmanFilamentCatalogTitle:`Catalogue de filaments Spoolman`,spoolmanFilamentCatalogDesc:`Noms de filaments et poids à vide depuis votre instance Spoolman. Le nom et le poids bobine sont modifiables ici ; toutes les autres propriétés sont gérées directement dans Spoolman.`,spoolmanUrl:`URL Spoolman`,spoolmanUrlHint:`URL de votre serveur Spoolman (ex: http://localhost:7912)`,spoolmanConnected:`Connecté`,spoolmanDisconnected:`Déconnecté`,status:`Statut`,connect:`Connecter`,disconnect:`Déconnecter`,howSyncWorks:`Fonctionnement de la Sync`,syncInfoRfidOnly:`Seules les bobines officielles RFID sont synchronisées`,syncInfoAutoCreate:`Les bobines sont créées dans Spoolman à la 1ère sync`,syncInfoThirdPartySkipped:`Les bobines tierces ou rechargées sont ignorées`,linkingExistingSpools:`Lier des bobines existantes`,linkingExistingSpoolsDesc:`Pour lier une bobine Spoolman, survolez un slot AMS et cliquez sur "Lier à Spoolman".`,syncMode:`Mode de Sync`,syncModeAuto:`Automatique`,syncModeManual:`Manuel uniquement`,syncModeAutoDesc:`Sync auto lors de changements AMS`,syncModeManualDesc:`Sync uniquement sur déclenchement manuel`,syncAmsData:`Synchroniser AMS`,syncAmsDataDesc:`Synchroniser manuellement les données vers Spoolman`,allPrinters:`Toutes les imprimantes`,noDefaultPrinter:`Aucune par défaut (demander à chaque fois)`,sidebarOrder:`Ordre de la barre latérale`,saveThumbnails:`Enregistrer les vignettes`,captureFinishPhoto:`Prendre une photo à la fin`,noPrintersConfigured:`Aucune imprimante configurée`,archiveMode:{always:`Toujours créer une archive`,never:`Ne jamais créer d'archive`,ask:`Demander à chaque fois`},checkForUpdatesLabel:`Vérifier les mises à jour`,checkPrinterFirmware:`Vérifier le firmware imprimante`,includeBetaUpdates:`Inclure les versions bêta`,includeBetaUpdatesDesc:`Notifier des versions bêta et préliminaires lors de la vérification des mises à jour`,localLogin:{disable:`Désactiver la connexion locale par nom d'utilisateur/mot de passe`,disableHint:`Quand activée, seuls les fournisseurs SSO peuvent se connecter. LDAP n'est pas affecté. Définissez BAMBUDDY_LOCAL_LOGIN=true sur le serveur pour conserver une voie de récupération.`},enableRetry:`Activer la rétentative`,homeAssistantDescription:`Contrôler les prises via Home Assistant`,environmentManagedLabel:`(Géré par l'environnement)`,autoEnabledViaEnv:`Activé via variables d'environnement`,urlFromEnvReadOnly:`Valeur HA_URL (lecture seule)`,tokenFromEnvReadOnly:`Valeur HA_TOKEN (lecture seule)`,mqttConnectedTo:`Connecté à`,prometheusDescription:`Exposer les données au format Prometheus`,noSmartPlugsTitle:`Aucune prise configurée`,noSmartPlugsDescription:`Ajoutez une prise Tasmota pour suivre l'énergie et automatiser.`,noProvidersTitle:`Aucun fournisseur configuré`,noProvidersDescription:`Ajoutez un fournisseur pour recevoir des alertes.`,noTemplatesAvailable:`Aucun modèle dispo. Redémarrez pour les générer.`,apiPermissionView:`Voir statut et file`,apiPermissionEdit:`Gérer la file d'attente`,apiKeysEmptyTitle:`Aucune clé API`,apiKeysEmptyDescription:`Créez une clé pour vos intégrations.`,noUsersFound:`Aucun utilisateur trouvé`,noGroupsFound:`Aucun groupe trouvé`,noGroupsAvailable:`Aucun groupe disponible`,passwordsDoNotMatch:`Les mots de passe ne correspondent pas`,systemGroupWarning:`Les noms des groupes système sont fixes`,authDisabledTitle:`Authentification désactivée`,authDisabledFeature1:`Requis pour accéder au système`,authDisabledFeature2:`Gestion multi-utilisateurs et groupes`,authDisabledFeature3:`Plus de 50 permissions granulaires`,userHasCreated:`Cet utilisateur a créé :`,userItemsQuestion:`Que faire de ces éléments ?`,deleteUserConfirm:`Supprimer cet utilisateur ?`,actionCannotBeUndone:`Cette action est irréversible.`,addFirstSmartPlug:`Ajoutez votre première prise`,providers:`Fournisseurs`,log:`Journal`,testAll:`Tout tester`,testResults:`Résultats du test`,testPassedCount:`{{count}} succès`,testFailedCount:`{{count}} échecs`,messageTemplates:`Modèles de message`,messageTemplatesDescription:`Personnalisez les messages par événement.`,apiKeys:`Clés API`,apiKeysDescription:`Créez des clés pour webhooks et API.`,createKey:`Créer une clé`,apiKeyCreated:`Clé API créée avec succès`,apiKeyCopyWarning:`Copiez cette clé maintenant - elle ne sera plus affichée !`,useInApiBrowser:`Utiliser dans l'explorateur API`,apiKeyQrButton:`Code QR`,apiKeyQrTitle:`Scanner pour configurer`,apiKeyQrCaption:`Scannez avec votre application mobile pour ajouter ce serveur et cette clé API.`,apiKeyQrWarning:`Contient votre clé API secrète — ne la partagez pas et ne la capturez pas là où d'autres peuvent la voir.`,createNewApiKey:`Nouvelle clé API`,keyName:`Nom de la clé`,keyNamePlaceholder:`ex: Home Assistant, OctoPrint`,readStatus:`Lire le statut`,readStatusDescription:`Voir l'état des imprimantes, la file, la bibliothèque, les archives et les pipelines du trancheur`,manageQueue:`Gérer la file`,manageQueueDescription:`Ajouter/retirer des éléments. Avec "Gérer la bibliothèque", exécuter des pipelines du trancheur`,controlPrinter:`Contrôler l'imprimante`,controlPrinterDescription:`Pause, reprise, arrêt`,manageLibrary:`Gérer la bibliothèque`,manageLibraryDescription:`Téléverser, renommer, supprimer et trancher des fichiers de la bibliothèque ; importer des modèles depuis MakerWorld. Avec "Gérer la file", exécuter des pipelines du trancheur`,manageInventory:`Gérer l'inventaire`,manageInventoryDescription:`Créer, modifier et supprimer des bobines et des entrées d'inventaire. Requis pour les bornes SpoolBuddy (scan NFC, lectures de balance, commandes système de la borne).`,manageMaintenance:`Gérer la maintenance`,manageMaintenanceDescription:`Enregistrer les maintenances effectuées, réinitialiser les compteurs, modifier les intervalles et gérer le catalogue des types de maintenance. Adapté aux automatisations Home Assistant qui consignent "J'ai nettoyé la buse" sans accorder un contrôle plus large de l'imprimante.`,manageArchives:`Gérer les archives`,manageArchivesDescription:`Modifier et supprimer les archives d'impression, y compris la suppression des anciennes impressions et de leur contribution aux statistiques. Adapté aux automatisations qui élaguent l'historique d'impression.`,manageProjects:`Gérer les projets`,manageProjectsDescription:`Créer, modifier et supprimer des projets, et y ajouter des archives. Adapté aux automatisations qui organisent les impressions en projets.`,maintenanceBadge:`Maintenance`,archivesBadge:`Archives`,projectsBadge:`Projets`,libraryBadge:`Bibliothèque`,inventoryBadge:`Inventaire`,cloudAccess:`Autoriser l'accès cloud`,cloudAccessDescription:`Lit les préréglages et filaments Bambu Cloud en votre nom. Nécessite d'être connecté à Bambu Cloud.`,cloudBadge:`Cloud`,updateEnergyCost:`Mettre à jour le tarif électrique`,updateEnergyCostDescription:`Autoriser cette clé à POSTer un nouveau tarif électrique par kWh sur /settings/electricity-price. Utile pour les automatisations Home Assistant à tarif dynamique (Tibber, Octopus, etc.). Il s'agit du seul champ de paramètres modifiable via clé API.`,energyCostBadge:`Énergie`,legacyKey:`Hérité`,legacyKeyTooltip:`Créé avant la propriété par utilisateur ; recréez pour l'accès cloud`,unnamedKey:`Clé sans nom`,lastUsed:`Dernière utilisation`,read:`Lecture`,control:`Contrôle`,createFirstKey:`Créez votre première clé`,webhookEndpoints:`Points de terminaison Webhook`,webhookApiKeyHint:`Utilisez la clé dans l'en-tête X-API-Key.`,webhook:{getAllStatus:`Tous les statuts`,getSpecificStatus:`Statut spécifique`,addToQueue:`Ajouter à la file`,pausePrint:`Pause`,resumePrint:`Reprise`,stopPrint:`Arrêt`},apiBrowser:`Explorateur API`,apiBrowserDescription:`Testez les endpoints API.`,apiKeyForTesting:`Clé API pour test`,apiKeyPlaceholder:`Collez votre clé pour tester...`,apiKeyHint:`Sera envoyée via l'en-tête X-API-Key.`,deleteApiKeyTitle:`Supprimer la clé API`,deleteApiKeyMessage:`Les intégrations utilisant cette clé cesseront de fonctionner.`,deleteKey:`Supprimer la clé`,amsDisplayThresholds:`Seuils d'affichage AMS`,amsThresholdsDescription:`Seuils de couleur pour humidité et température.`,humidity:`Humidité`,goodGreen:`Bon (vert)`,fairOrange:`Moyen (orange)`,aboveFairBad:`Au-dessus = rouge (mauvais)`,fairAlsoDryingThreshold:`Ce seuil est aussi utilisé pour déclencher le séchage automatique`,fairBelowDryingFloor:`Le séchage automatique ne peut pas atteindre cette valeur : un AMS indique {{floor}} % ou plus lorsqu'il chauffe, donc chaque cycle se terminerait puis redémarrerait aussitôt. Passez au-dessus de {{floor}} % si le séchage automatique est activé.`,temperature:`Température`,goodBlue:`Bon (bleu)`,aboveFairHot:`Au-dessus = rouge (chaud)`,tempAlarmThreshold:`Alerte au-dessus de`,tempAlarmSeparateFromBand:`Seul le seuil d'alerte envoie des notifications — Bon et Correct ne font que colorer l'affichage. Laissez vide pour alerter au seuil correct, comme avant.`,tempAlarmMustBePositive:`Un seuil de 0 ou moins est ignoré — l'alerte utilise alors le seuil correct.`,historyRetention:`Rétention d'historique`,keepSensorHistory:`Garder l'historique pendant`,historyRetentionDescription:`Les anciennes données seront supprimées.`,defaultPrintOptions:`Options d'impression par défaut`,defaultPrintOptionsDescription:`Définir les valeurs par défaut des options d'impression. Modifiables dans la boîte de dialogue d'impression.`,defaultBedLevelling:`Nivellement du lit`,defaultBedLevellingDesc:`Niveler automatiquement le lit avant l'impression`,defaultFlowCali:`Calibration du flux`,defaultFlowCaliDesc:`Calibrer le flux d'extrusion`,defaultVibrationCali:`Calibration des vibrations`,defaultVibrationCaliDesc:`Réduire les artefacts de ringing`,defaultLayerInspect:`Inspection première couche`,defaultLayerInspectDesc:`Inspection IA de la première couche`,defaultTimelapse:`Time-lapse`,defaultTimelapseDesc:`Enregistrer une vidéo timelapse`,defaultNozzleOffsetCali:`Calibration du décalage des buses`,defaultNozzleOffsetCaliDesc:`Calibrer les décalages entre les buses`,tempFanPresetsTitle:`Préréglages de température et de ventilateur`,tempFanPresetsDescription:`Personnalisez les valeurs de sélection rapide affichées dans les fenêtres contextuelles de température et de vitesse du ventilateur de la carte imprimante. Le bouton Arrêt est toujours affiché.`,tempFanPresetsNozzle:`Température de la buse`,tempFanPresetsBed:`Température du plateau`,tempFanPresetsChamber:`Température de la chambre`,tempFanPresetsFan:`Vitesse du ventilateur`,tempFanPresetsReset:`Rétablir les valeurs par défaut`,concurrentUploadsTitle:`Envois simultanés`,concurrentUploadsDescription:`Nombre d'imprimantes auxquelles la file d'attente peut envoyer des fichiers en même temps. Les imprimantes reçoivent les fichiers lentement (une grosse impression peut prendre plusieurs minutes) et chacune attend son tour : sur un parc important, augmenter cette valeur évite que la dernière imprimante d'un lot doive attendre la fin de tous les transferts précédents. Réduisez-la si votre réseau ou votre hôte Bambuddy supporte mal les transferts parallèles.`,concurrentUploadsLabel:`Imprimantes servies simultanément`,concurrentUploadsHelp:`1 n'envoie qu'à une imprimante à la fois (l'ancien comportement). Valeur par défaut : 4.`,staggeredStart:`Démarrage échelonné`,staggeredStartDescription:`Taille de groupe et intervalle par défaut lors de l'échelonnement des démarrages de lots multi-imprimantes. Modifiable par lot dans la fenêtre d'impression.`,preheatTitle:`Préchauffage & Heat Soak`,preheatDescription:`Chauffe le plateau (et la chambre, si pris en charge) et maintient la température avant le démarrage de chaque impression de la file. Utile pour les filaments techniques (PA, ABS) sur les imprimantes sans chauffage actif de la chambre — le plateau chauffe la chambre par rayonnement pendant que le minuteur de soak s'écoule. La température cible du plateau provient du fichier d'impression ; le comportement de la chambre dépend du modèle d'imprimante.`,preheatEnabled:`Activer préchauffage & soak`,preheatEnabledDesc:`Si désactivé, les impressions en file démarrent immédiatement. Chaque élément peut surcharger par impression.`,preheatFilamentTargetsLabel:`Cible chambre par filament (°C)`,preheatFilamentTargetsHint:`Bambuddy choisit la cible la plus haute parmi les slots AMS chargés. Une impression dont tous les slots donnent 0 — PLA, PETG, TPU, PVA — saute entièrement le préchauffage et démarre immédiatement.`,preheatFilamentTargetsReset:`Restaurer les valeurs par défaut`,preheatFilamentTargetsDefaultRow:`Autre / non mappé`,preheatMaxWait:`Attente max (secondes)`,preheatMaxWaitHelp:`Plafond de la phase de chauffe de la chambre avant passage au soak.`,preheatSoak:`Soak (secondes)`,preheatSoakHelp:`Maintien après l'atteinte de la cible ou l'expiration de l'attente max.`,preheatHardwareTitle:`Comportement par imprimante :`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E chauffent activement la chambre via M141. X1C/P2S lisent la température mais ne chauffent la chambre que par rayonnement du plateau. P1S/P1P/A1/A1 Mini n'ont pas de capteur de chambre — seul le minuteur de soak s'applique.`,preheatPerItemDesc:`Chauffe le plateau et la chambre avant le démarrage de cette impression. Utilise par défaut le commutateur global de Paramètres → Workflow.`,preheatOverride_inherit:`Hériter`,preheatOverride_on:`Activé`,preheatOverride_off:`Désactivé`,calibrationMode_off:`Désactivé`,calibrationMode_on:`Activé`,calibrationMode_auto:`Auto`,preheatTargetOverride:`Surcharger la cible chambre (°C, vide = par filament)`,preheatTargetOverrideHelp:`0 chauffe le plateau et exécute le maintien sans la chambre. Laissé vide, une impression sans besoin de chambre saute entièrement le préchauffage.`,plateClear:`Confirmation de plateau libre`,requirePlateClear:`Exiger la confirmation de plateau libre`,requirePlateClearDescription:`Lorsque cette option est activée, le planificateur attend une confirmation de plateau libre par imprimante avant de lancer les impressions en file d'attente sur les imprimantes ayant terminé. La désactiver masque également le badge d'état du plateau et le bouton « Marquer le plateau comme dégagé » sur les cartes d'imprimante.`,keepBedWarm:`Maintenir le plateau chaud entre les impressions`,keepBedWarmDesc:`En attendant la confirmation de plateau libéré, maintient le plateau à la température de maintien au chaud ci-dessous pour que la chambre reste chaude — ou à la température de plateau de l'impression suivante si elle est plus élevée. S'applique uniquement lorsque l'impression suivante nécessite un chauffage de chambre (ASA, ABS, PA, PC, etc.). Nécessite l'activation de la confirmation de plateau libéré.`,keepWarmBedTemp:`Température du plateau en maintien au chaud (°C)`,keepWarmBedTempHelp:`Utilisé lorsque le plateau sert à chauffer la chambre : pendant le maintien au chaud et lors du préchauffage si le fichier d'impression ne contient pas de température de plateau. Une température plus élevée issue du fichier est toujours prioritaire.`,keepWarmMaxMinutes:`Arrêter le maintien au chaud après (minutes)`,keepWarmMaxMinutesHelp:`Si le plateau n'est pas libéré dans ce délai, les chauffages sont coupés au lieu d'être maintenus indéfiniment.`,gcodeInjection:`Injection de G-code`,gcodeInjectionDescription:`Configurez du G-code personnalisé à injecter au début et/ou à la fin des impressions pour les systèmes d'auto-impression comme Farmloop, SwapMod, AutoClear et Printflow 3D. Les snippets sont configurés par modèle d'imprimante et appliqués lorsque « Injecter le G-code » est activé sur un élément de file d'attente.`,gcodeInjectionNoPrinters:`Aucune imprimante trouvée. Ajoutez des imprimantes pour configurer les snippets G-code.`,gcodeStartLabel:`G-code de début`,gcodeEndLabel:`G-code de fin`,gcodeStartPlaceholder:`G-code ajouté avant le début de l'impression...`,gcodeEndPlaceholder:`G-code ajouté après la fin de l'impression...`,staggerGroupSize:`Taille du groupe`,staggerGroupSizeHelp:`Imprimantes à démarrer simultanément par groupe`,staggerInterval:`Intervalle (minutes)`,staggerIntervalHelp:`Délai entre chaque démarrage de groupe`,queueDrying:`Séchage automatique`,queueDryingDescription:`Sécher automatiquement le filament AMS lorsque l'imprimante est inactive entre les impressions. Utilise le seuil d'humidité ci-dessus.`,queueDryingEnabled:`Activer le séchage automatique`,queueDryingEnabledDescription:`Démarrer le séchage AMS automatiquement lorsque l'imprimante est inactive et l'humidité dépasse le seuil`,queueDryingBlock:`Attendre la fin du séchage`,queueDryingBlockDescription:`Bloquer la file d'attente jusqu'à la fin du séchage. Désactivé, les impressions sont prioritaires.`,ambientDryingEnabled:`Séchage ambiant`,ambientDryingEnabledDescription:`Sécher automatiquement le filament sur les imprimantes inactives lorsque l'humidité dépasse le seuil, même sans impressions en file.`,printDryingEnabled:`Séchage pendant l'impression`,printDryingEnabledDescription:`Autorise le séchage automatique à continuer pendant une impression sur le matériel pris en charge (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L avec firmware récent). La température de séchage est automatiquement limitée à 5°C sous le préréglage en attente pour protéger les bobines.`,dryingPresets:`Préréglages de séchage`,dryingPresetsDescription:`Température et durée par type de filament. AMS 2 Pro utilise des températures plus basses, AMS-HT supporte des températures plus élevées.`,dryingFilament:`Filament`,humidityThresholds:`Seuils d'humidité`,humidityThresholdsDescription:`Déclencheur d'humidité par type de filament pour le séchage auto et les alarmes. Charges mixtes dans un AMS utilisent le seuil le plus bas.`,humidityThresholdCol:`Seuil`,humidityThresholdDefault:`Par défaut (types inconnus)`,printModal:`Fenêtre d'impression`,expandCustomMapping:`Étendre le mapping personnalisé par défaut`,expandCustomMappingDescription:`Affiche le mapping AMS par imprimante étendu.`,authentication:`Authentification`,authEnabledDescription:`L'instance est sécurisée`,authDisabledDescription:`Activez pour restreindre l'accès`,authDisabledMessage:`Activez l'authentification pour gérer comptes et permissions.`,enableAuthentication:`Activer l'authentification`,currentUser:`Utilisateur actuel`,changePassword:`Changer le mot de passe`,admin:`Administrateur`,users:`Utilisateurs`,addUser:`Ajouter un utilisateur`,groups:`Groupes`,addGroup:`Ajouter un groupe`,system:`Système`,noDescription:`Pas de description`,userCount:`{{count}} utilisateurs`,permissionCount:`{{count}} permissions`,createUser:`Créer un utilisateur`,username:`Nom d'utilisateur`,enterUsername:`Entrez l'utilisateur`,password:`Mot de passe`,enterPassword:`Entrez le mot de passe`,passwordRequirements:`Au moins 8 caractères, avec une majuscule, une minuscule, un chiffre et un caractère spécial.`,confirmPassword:`Confirmer le mot de passe`,confirmPasswordPlaceholder:`Confirmez le mot de passe`,viewReleaseOnGitHub:`Voir la version sur GitHub`,turnAllPlugsOn:`Tout allumer`,turnAllPlugsOff:`Tout éteindre`,clearNotificationLogs:`Effacer les journaux`,clearLogsMessage:`Efface définitivement les logs de plus de 30 jours.`,clearLogs:`Effacer les logs`,resetUiPreferences:`Réinitialiser l'UI`,resetUiPreferencesMessage:`Réinitialise l'ordre, thème, widgets, etc. N'affecte pas vos données.`,resetPreferences:`Réinitialiser`,deleteGroupTitle:`Supprimer le groupe`,deleteGroupMessage:`Les utilisateurs de ce groupe perdront ces permissions.`,deleteGroup:`Supprimer le groupe`,disableAuthenticationTitle:`Désactiver l'authentification`,disableAuthenticationMessage:`Instance accessible sans connexion. Les comptes sont conservés.`,disableAuthentication:`Désactiver`,configureBambuddy:`Configurer Bambuddy`,systemDefault:`Défaut système`,archiveSettings:`Réglages Archives`,newWindow:`Nouvelle fenêtre`,embeddedOverlay:`Superposition intégrée`,preferredSlicer:`Slicer préféré`,preferredSlicerDescription:`Slicer utilisé pour le tranchage intégré via le sidecar API`,openInSlicerLabel:`Ouvrir dans le slicer`,openInSlicerInherit:`Identique au slicer API`,openInSlicerDescription:`Slicer de bureau utilisé par le bouton « Ouvrir dans le slicer ». Laissez sur « Identique au slicer API » pour hériter, ou choisissez un slicer différent pour un usage local.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev ont des bugs CLI connus qui bloquent le découpage de nombreux 3MF créés par Bambu — voir les issues amont #12426 (segfault sur fichiers multi-extrudeurs peints) et #13386 (rejet de validation stricte des plages de paramètres). Bambu Studio est recommandé jusqu'à ce que les correctifs amont arrivent.`,useSlicerApi:`Utiliser l'API Slicer`,useSlicerApiDescription:`Lorsque activé, les actions "Slice" ouvrent le slicer intégré et appellent le sidecar slicer-API. Lorsque désactivé (par défaut), elles redirigent vers le slicer desktop via le schéma URI.`,slicerCard:`Slicer`,orcaslicerApiUrl:`OrcaSlicer sidecar URL`,bambuStudioApiUrl:`Bambu Studio sidecar URL`,slicerStallTimeout:`Delai d'inactivite du trancheur (minutes)`,slicerStallTimeoutDescription:`Abandonne un decoupage apres cette duree sans progression du sidecar. Les modeles lourds qui continuent a signaler leur progression ne sont jamais interrompus, quel que soit le temps necessaire. Les sidecars qui ne signalent pas de progression utilisent cette valeur comme limite de duree totale.`,slicerApiUrlDescription:`URL du conteneur sidecar slicer-API. Laisser vide pour utiliser les variables d'environnement SLICER_API_URL / BAMBU_STUDIO_API_URL.`,externalCameras:`Caméras externes`,costTracking:`Suivi des coûts`,printsOnly:`Impressions uniquement`,totalConsumption:`Consommation totale`,dataManagement:`Gestion des données`,storageUsage:`Utilisation du stockage`,storageUsageDescription:`Répartition de l'utilisation des données par catégorie`,storageUsageTotal:`Total`,storageUsageErrors:`Erreurs`,storageUsageOtherBreakdown:`Autre (inclut ressources statiques, scripts et fichiers de configuration)`,storageUsageSystem:`Système`,storageUsageData:`Données`,storageUsageUnavailable:`Informations d'utilisation du stockage non disponibles`,clearNotificationLogsDescription:`Supprimer logs de plus de 30 jours`,resetUiPreferencesDescription:`Réinitialise thèmes et affichage sans toucher aux données.`,enableHomeAssistant:`Activer Home Assistant`,enableMqtt:`Activer MQTT`,useTls:`Utiliser TLS`,enableMetricsEndpoint:`Activer l'endpoint Metrics`,availableMetrics:`Metrics disponibles`,billingEnabled:`Activer la facturation`,billingEnabledDescription:`Facturer les utilisateurs pour les impressions et activer les fonctionnalités financières`,printerKillSwitch:`Interrupteur d'arrêt automatique`,printerKillSwitchDescription:`Arrêter immédiatement les impressions qui démarrent sans autorisation`,financeBudgetReset:`Réinitialisation mensuelle du budget financier`,financeBudgetResetDay:`Jour de réinitialisation`,financeBudgetResetDayHelp:`Pour les mois courts, la réinitialisation utilise le dernier jour du mois.`,financeBudgetResetTimezone:`Fuseau horaire de réinitialisation`,financeBudgetResetTimezoneHelp:`Le fuseau horaire utilisé pour déterminer le moment de la réinitialisation du budget chaque mois.`,rebuildLedger:`Reconstruire le grand livre du portefeuille`,rebuildLedgerStarted:`Reconstruction du grand livre commencée`,rebuildLedgerConfirmTitle:`Reconstruire le grand livre du portefeuille?`,rebuildLedgerConfirmMessage:`Cela reconstruira le grand livre du portefeuille pour réparer les valeurs de solde historiques. Exécutez ceci uniquement si vous savez ce que vous faites.`,rebuildLedgerInProgress:`Reconstruction en cours de démarrage...`,editUser:`Modifier l'utilisateur`,deleteUserTitle:`Supprimer l'utilisateur`,groupName:`Nom du groupe`,leaveEmptyForAnonymous:`Vide pour anonyme`,leaveEmptyForNoAuth:`Vide si pas d'auth`,enterNewPassword:`Nouveau mot de passe`,confirmNewPassword:`Confirmer nouveau mdp`,enterGroupName:`Entrez le nom du groupe`,enterDescriptionOptional:`Description (optionnel)`,enterCurrentPassword:`Mdp actuel`,enterNewPasswordMin6:`Nouveau mdp (min 6 char)`,toast:{keyCopied:`Clé copiée`,copyFailed:`Échec copie`,keyAddedToBrowser:`Clé ajoutée à l'explorateur`,clearLogsFailed:`Échec effacement logs`,uiPreferencesReset:`Préférences UI réinitialisées. Rafraîchissement...`,authDisabled:`Authentification désactivée`,authDisableFailed:`Échec désactivation`,apiKeyCreated:`Clé API créée`,apiKeyDeleted:`Clé API supprimée`,userCreated:`Utilisateur créé`,userUpdated:`Utilisateur mis à jour`,userDeleted:`Utilisateur supprimé`,groupCreated:`Groupe créé`,groupUpdated:`Groupe mis à jour`,groupDeleted:`Groupe supprimé`,fillRequiredFields:`Remplissez les champs requis`,passwordsDoNotMatch:`Les mots de passe ne correspondent pas`,passwordTooShort:`Le mot de passe doit contenir au moins 8 caractères`,passwordNeedsUppercase:`Le mot de passe doit contenir au moins une majuscule`,passwordNeedsLowercase:`Le mot de passe doit contenir au moins une minuscule`,passwordNeedsDigit:`Le mot de passe doit contenir au moins un chiffre`,passwordNeedsSpecial:`Le mot de passe doit contenir au moins un caractère spécial`,enterGroupName:`Entrez un nom de groupe`,settingsSaved:`Paramètres enregistrés`,noPermissionUpdate:`Vous n'avez pas l'autorisation de modifier les paramètres`,cameraSettingsSaved:`Réglages caméra enregistrés`,enterCameraUrl:`Entrez une URL caméra`,passwordChanged:`Mot de passe modifié`,connectionFailed:`Échec connexion`,testFailed:`Échec test`,cameraConnected:`Caméra connectée {{resolution}}`,cameraConnectedCoalesced:`Caméra connectée {{resolution}} (partagée avec une capture déjà en cours)`},testConnection:`Tester la connexion`,catalog:{spoolCatalog:`Catalogue de Bobines`,spoolCatalogDescription:`Poids des bobines vides par marque/type. Utilisé pour le calcul auto du poids restant.`,searchCatalog:`Chercher dans le catalogue...`,addNewEntry:`Nouvelle Entrée`,namePlaceholder:`Nom (ex: Bambu Lab - Plastique)`,weight:`Poids`,type:`Type`,default:`Défaut`,custom:`Perso`,noMatch:`Aucune entrée correspondante`,empty:`Catalogue vide`,deleteEntry:`Supprimer l'entrée`,deleteConfirm:`Supprimer "{{name}}" ?`,resetCatalog:`Réinitialiser le catalogue`,resetConfirm:`Réinitialiser aux valeurs par défaut ? Vos entrées personnalisées seront supprimées.`,loadFailed:`Échec chargement catalogue`,nameWeightRequired:`Nom et poids requis`,entryAdded:`Entrée ajoutée`,addFailed:`Échec ajout`,entryUpdated:`Entrée mise à jour`,updateFailed:`Échec mise à jour`,entryDeleted:`Entrée supprimée`,deleteFailed:`Échec suppression`,resetSuccess:`Catalogue réinitialisé`,resetFailed:`Échec réinitialisation`,exported:`{{count}} entrées exportées`,imported:`{{added}} entrées importées ({{skipped}} ignorées)`,importFailed:`Échec import : format JSON invalide`,exportTooltip:`Exporter en JSON`,importTooltip:`Importer depuis JSON`,resetTooltip:`Réinitialiser par défaut`,selectedCount:`{{count}} sélectionnés`,deleteSelected:`Supprimer la sélection`,bulkDeleteConfirm:`Supprimer {{count}} entrées ?`,bulkDeleted:`{{count}} entrées supprimées`,bulkDeleteFailed:`Échec de la suppression`,material:`Matériau`,spoolWeight:`Poids bobine`,color:`Couleur`,updateSpoolWeight:`Mettre à jour le poids bobine`,filamentUpdated:`Filament mis à jour`,filamentUpdateFailed:`Échec de la mise à jour du filament`,filamentUpdateInvalid:`Données de filament invalides`,keepExistingSpoolWeight:`Conserver l'ancien poids pour les bobines existantes`,keepExistingSpoolWeightDesc:`Les bobines déjà créées avec ce type de filament conservent l'ancien poids à vide. Les nouvelles bobines utilisent la valeur mise à jour.`,applyToAllSpools:`Appliquer à toutes les bobines`,applyToAllSpoolsDesc:`Tous les calculs de poids pour ce type de filament utilisent immédiatement le nouveau poids à vide.`},colorCatalog:{title:`Catalogue de Couleurs`,description:`Couleurs de filament par fabricant. Utilisé pour la recherche auto lors de l'ajout de bobines.`,searchColors:`Chercher couleurs...`,allManufacturers:`Tous les fabricants`,addNewColor:`Nouvelle Couleur`,manufacturer:`Fabricant`,colorName:`Nom couleur`,hex:`Hex`,materialOptional:`Matériau (optionnel)`,showing:`Affichage {{filtered}} sur {{total}} couleurs`,noMatch:`Aucune couleur correspondante`,empty:`Catalogue vide`,deleteColor:`Supprimer couleur`,deleteConfirm:`Supprimer "{{name}}" ?`,resetCatalog:`Réinitialiser catalogue couleurs`,resetConfirm:`Réinitialiser aux valeurs par défaut ?`,sync:`Synchro.`,starting:`Démarrage...`,syncTooltip:`Sync depuis FilamentColors.xyz (2000+ couleurs, peut être long)`,loadFailed:`Échec chargement catalogue couleurs`,fieldsRequired:`Fabricant, nom et code Hex requis`,colorAdded:`Couleur ajoutée`,addFailed:`Échec ajout`,colorUpdated:`Couleur mise à jour`,updateFailed:`Échec mise à jour`,colorDeleted:`Couleur supprimée`,deleteFailed:`Échec suppression`,resetSuccess:`Catalogue réinitialisé`,resetFailed:`Échec réinitialisation`,syncUpToDate:`Déjà à jour ({{count}} couleurs vérifiées)`,syncComplete:`{{added}} couleurs ajoutées ({{skipped}} déjà présentes)`,syncError:`Erreur de sync`,syncFailed:`Échec sync FilamentColors.xyz`,exported:`{{count}} couleurs exportées`,imported:`{{added}} couleurs importées ({{skipped}} ignorées)`,importFailed:`Échec import : format JSON invalide`,selectedCount:`{{count}} sélectionnés`,deleteSelected:`Supprimer la sélection`,bulkDeleteConfirm:`Supprimer {{count}} couleurs ?`,bulkDeleted:`{{count}} couleurs supprimées`,bulkDeleteFailed:`Échec de la suppression des couleurs`},dateFormat:`Format de date`,dateFormatUs:`US (MM/JJ/AAAA)`,dateFormatEu:`EU (JJ/MM/AAAA)`,dateFormatIso:`ISO (AAAA-MM-JJ)`,timeFormat:`Format horaire`,timeFormat12:`12 heures (3:30 PM)`,timeFormat24:`24 heures (15:30)`,defaultPrinter:`Imprimante par défaut`,defaultPrinterDescription:`Présélectionner cette imprimante pour les téléversements, réimpressions et autres opérations.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Utilisez la disposition de la barre latérale pour réorganiser les éléments, réinitialiser la visibilité et gérer les liens personnalisés.`,setDefault:`Définir par défaut`,sidebarOrderSetDefaultHint:`Définir par défaut applique l'ordre actuel du menu aux utilisateurs qui n'ont pas encore personnalisé le leur.`,sidebarDefaultSet:`L'ordre du menu par défaut a été défini.`,sidebarDefaultCleared:`Ordre du menu par défaut effacé.`,sidebarDefaultFailed:`Échec de la définition de l'ordre du menu par défaut.`,reset:`Réinitialiser`,darkMode:`Mode sombre`,lightMode:`Mode clair`,active:`(actif)`,background:`Arrière-plan`,accent:`Accent`,style:`Style`,bgNeutral:`Neutre`,bgWarm:`Chaud`,bgCool:`Froid`,bgOled:`OLED Noir`,bgSlate:`Bleu ardoise`,bgForest:`Vert forêt`,accentGreen:`Vert`,accentTeal:`Sarcelle`,accentBlue:`Bleu`,accentOrange:`Orange`,accentPurple:`Violet`,accentRed:`Rouge`,styleClassic:`Classique`,styleGlow:`Lumineux`,styleVibrant:`Vif`,themeToggleHint:`Basculer entre le mode sombre, clair et système avec l'icône dans la barre latérale.`,progressInTitle:`Progression dans l'onglet`,progressInTitleDescription:`Affiche le pourcentage de l'impression en cours et un anneau de progression dans l'onglet du navigateur.`,autoArchivePrints:`Archiver automatiquement les impressions`,autoArchiveDescription:`Sauvegarder automatiquement les fichiers 3MF à la fin des impressions`,saveThumbnailsDescription:`Extraire et sauvegarder les images d'aperçu des fichiers 3MF`,captureFinishPhotoDescription:`Prendre une photo avec la caméra de l'imprimante à la fin de l'impression. Bambuddy enregistre un court timelapse pendant l'impression afin que la photo puisse provenir du moment précédant l'abaissement du plateau ; le fichier du timelapse est conservé si vous avez activé le timelapse pour cette impression, sinon il est supprimé automatiquement après la capture de la photo.`,finishPhotoRestorePlate:`Remonter le plateau pour la photo finale`,finishPhotoRestorePlateDescription:`L'imprimante abaisse le plateau d'environ 100 mm à la fin d'une impression, plaçant l'objet terminé sous le cadrage de la caméra. Bambuddy le remonte juste au-dessus de la dernière couche imprimée, prend la photo, puis le rabaisse. Ignoré si la hauteur d'impression est inconnue ou si un autre travail est en file d'attente.`,ffmpegNotInstalled:`ffmpeg non installé`,ffmpegRequired:`La capture caméra nécessite ffmpeg. Installez-le via <brew>brew install ffmpeg</brew> (macOS) ou <apt>apt install ffmpeg</apt> (Linux).`,camera:`Caméra`,cameraViewMode:`Mode d'affichage caméra`,cameraOverlayDescription:`La caméra s'ouvre dans un overlay redimensionnable sur l'écran principal`,cameraWindowDescription:`La caméra s'ouvre dans une fenêtre de navigateur séparée`,externalCamerasDescription:`Configurer des caméras externes pour remplacer la caméra intégrée. Supporte les flux MJPEG, RTSP, snapshots HTTP et caméras USB (V4L2). Lorsqu'activée, la caméra externe est utilisée pour la vue en direct et les photos de fin.`,cameraPlaceholderUsb:`Chemin du périphérique (/dev/video0)`,cameraPlaceholderUrl:`URL caméra (rtsp://... ou http://...)`,cameraTypeMjpeg:`Flux MJPEG`,cameraTypeRtsp:`Flux RTSP`,cameraTypeSnapshot:`Snapshot HTTP`,cameraTypeUsb:`Caméra USB (V4L2)`,cameraSnapshotUrl:`URL de capture (facultatif)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`URL d'image unique utilisée pour les miniatures de notification, photos de fin, frames de timelapse par couche et détection de plaque. Le timelapse et la détection de plaque nécessitent chacun leur propre bascule par imprimante — cette URL est juste la source d'image qu'ils utilisent lorsqu'activés. Laisser vide pour capturer depuis le flux en direct ci-dessus. Utile pour go2rtc (/api/frame.jpeg) et caméras IP avec un point de terminaison de capture dédié.`,cameraRotation:`Rotation`,test:`Tester`,connected:`Connecté`,disconnected:`Déconnecté`,currency:`Devise`,defaultFilamentCost:`Coût filament par défaut (par kg)`,electricityCost:`Coût électricité par kWh`,energyDisplayMode:`Mode d'affichage énergie`,energyModePrintDescription:`Le tableau de bord affiche la somme de l'énergie utilisée pendant les impressions`,energyModeTotalDescription:`Le tableau de bord affiche l'énergie totale des prises connectées`,fileManager:`Gestionnaire de fichiers`,createArchiveEntry:`Créer une entrée d'archive lors de l'impression`,createArchiveEntryDescription:`Lors de l'impression depuis le gestionnaire de fichiers, créer optionnellement une entrée d'archive`,lowDiskSpaceWarning:`Avertissement espace disque faible`,lowDiskSpaceDescription:`Afficher un avertissement lorsque l'espace disque libre descend sous ce seuil`,printerFirmware:`Firmware imprimante`,checkFirmwareDescription:`Vérifier les mises à jour firmware de Bambu Lab`,bambuddySoftware:`Logiciel Bambuddy`,autoCheckDescription:`Vérifier automatiquement les nouvelles versions au démarrage`,checkNow:`Vérifier maintenant`,updateAvailableVersion:`Mise à jour disponible : v{{version}}`,releaseNotes:`Notes de version`,updateViaDocker:`Mettre à jour via Docker Compose :`,composeDirectory:`Répertoire Compose`,composeDirectoryHint:`Répertoire contenant votre docker-compose.yml. Laissez vide pour omettre le cd.`,copyUpdateCommand:`Copier la commande de mise à jour`,updateViaHomeAssistant:`Les mises à jour sont gérées par le superviseur Home Assistant. Ouvrez Paramètres → Modules complémentaires → Bambuddy dans Home Assistant pour installer la nouvelle version.`,updateViaWindowsInstaller:`Les installations Windows se mettent à jour en relançant l'installateur. Téléchargez la nouvelle version ci-dessous — vos données, paramètres et imprimantes sont préservés.`,downloadWindowsInstaller:`Télécharger l'installateur pour la v{{version}}`,installUpdate:`Installer la mise à jour`,latestVersionRunning:`Vous utilisez la dernière version`,failedToCheckUpdates:`Échec de la vérification des mises à jour : {{error}}`,backupRestore:`Sauvegarde & Restauration`,backupRestoreDescription:`Exporter/importer les paramètres et configurer la sauvegarde GitHub`,goToBackup:`Aller à la sauvegarde`,externalUrl:`URL externe`,externalUrlDescription:`L'URL externe où Bambuddy est accessible. Utilisée pour les images de notification et les intégrations externes.`,bambuddyUrl:`URL Bambuddy`,externalUrlHint:`Inclure le protocole et le port (ex : http://192.168.1.100:8000)`,ftpRetry:`Réessai FTP`,ftpRetryDescription:`Réessayer les opérations FTP lorsque le WiFi de l'imprimante est instable. S'applique aux téléchargements 3MF, uploads d'impression, téléchargements timelapse et mises à jour firmware.`,autoRetryDescription:`Réessayer automatiquement les opérations FTP échouées`,retryAttempts:`Tentatives de réessai`,retryDelay:`Délai de réessai`,connectionTimeout:`Délai de connexion`,time_one:`{{count}} fois`,time_other:`{{count}} fois`,second_one:`{{count}} seconde`,second_other:`{{count}} secondes`,nSeconds:`{{count}} secondes`,increaseForWeakWifi:`Augmenter pour les imprimantes avec un WiFi faible`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Se connecter à Home Assistant pour contrôler les prises connectées via l'API REST HA. Supporte les entités switch, light, input_boolean et script.`,homeAssistantUrl:`URL Home Assistant`,longLivedAccessToken:`Token d'accès longue durée`,haTokenHint:`Créer un token dans HA : Profil → Tokens d'accès longue durée → Créer un token`,connectionSuccessful:`Connexion réussie`,connectionFailed:`Connexion échouée`,haConnectionSuccess:`Connexion à Home Assistant réussie.`,haConnectionFailed:`Échec de la connexion à Home Assistant.`,mqttPublishing:`Publication MQTT`,mqttDescription:`Publier les événements BamBuddy vers un broker MQTT externe pour l'intégration avec Node-RED, Home Assistant et d'autres systèmes d'automatisation.`,mqttEnableDescription:`Publier les événements vers un broker MQTT externe`,brokerHostname:`Nom d'hôte du broker`,port:`Port`,usernameOptional:`Nom d'utilisateur (optionnel)`,passwordOptional:`Mot de passe (optionnel)`,topicPrefix:`Préfixe de topic`,topicPrefixHint:`Les topics seront : {{prefix}}/printers/<serial>/status, etc.`,prometheusMetrics:`Métriques Prometheus`,prometheusEndpointDescription:`Exposer les métriques imprimante sur <code>/api/v1/metrics</code> pour la surveillance Prometheus/Grafana.`,bearerTokenOptional:`Token Bearer (optionnel)`,bearerTokenHint:`Si défini, les requêtes doivent inclure <code>Authorization: Bearer <token></code>`,metricsConnectionStatus:`État de connexion`,metricsPrinterState:`État imprimante (idle/printing/etc)`,metricsPrintProgress:`Progression impression 0-100%`,metricsBedTemp:`Température du plateau`,metricsNozzleTemp:`Température de la buse`,metricsPrintsTotal:`Total impressions par résultat`,metricsMore:`...et plus (couches, ventilateurs, file d'attente, utilisation filament)`,smartPlugsDescription:`Connecter des prises connectées (Tasmota ou Home Assistant) pour automatiser le contrôle de l'alimentation et suivre la consommation d'énergie de vos imprimantes.`,allOn:`Tout allumer`,allOff:`Tout éteindre`,addSmartPlug:`Ajouter une prise`,energySummary:`Résumé énergétique`,currentPower:`Puissance actuelle`,plugsOnline:`{{reachable}}/{{total}} prises en ligne`,today:`Aujourd'hui`,yesterday:`Hier`,total:`Total`,enablePlugsForSummary:`Activer les prises pour voir le résumé énergétique`,addNotificationProvider:`Ajouter`,systemBadge:`(Système)`,creating:`Création...`,changing:`Modification...`,deleteUserAndItems:`Supprimer l'utilisateur ET ses éléments`,deleteUserKeepItems:`Supprimer l'utilisateur, garder les éléments (deviennent sans propriétaire)`,ok:`OK`,twoFa:{totpTitle:`Application Authenticator (TOTP)`,totpDesc:`Utilisez une application comme Google Authenticator, Aegis ou Authy.`,emailOtpTitle:`OTP par e-mail`,emailOtpDesc:`Envoyez un code à usage unique à {{email}} lors de la connexion.`,emailOtpNoEmail:`Ajoutez une adresse e-mail à votre compte pour activer cette méthode.`,addEmailFirst:`Votre compte n'a pas d'adresse e-mail. Demandez à un administrateur d'en ajouter une.`,setupTotp:`Configurer l'application Authenticator`,setupAuthApp:`Configurer l'application Authenticator`,setupInstructions:`Scannez le QR code avec votre application authenticator, puis confirmez avec un code.`,manualEntry:`Impossible de scanner ? Entrez ce secret manuellement :`,scannedContinue:`Code scanné — continuer`,enterCodeToConfirm:`Entrez le code à 6 chiffres de votre application authenticator pour confirmer.`,activate:`Activer`,disableTotp:`Désactiver l'Authenticator`,disableConfirmHint:`Entrez un code TOTP valide ou un code de secours pour désactiver l'authenticator.`,totpDisabled:`Application Authenticator désactivée.`,emailOtpEnabled:`OTP par e-mail activé.`,emailOtpDisabled:`OTP par e-mail désactivé.`,smtpRequired:`Veuillez d'abord configurer et tester les paramètres SMTP.`,invalidCode:`Code invalide. Veuillez réessayer.`,enableEmailOtp:`Activer OTP par e-mail`,disableEmailOtp:`Désactiver OTP par e-mail`,emailSetupEnterCode:`Un code de vérification a été envoyé à votre adresse e-mail. Entrez-le ci-dessous pour confirmer que vous possédez cette boîte de réception.`,verifyAndEnable:`Vérifier et activer`,emailDisablePasswordHint:`Entrez le mot de passe de votre compte pour confirmer la désactivation de l'OTP par e-mail.`,passwordPlaceholder:`Entrez votre mot de passe`,backupCodesTitle:`Sauvegardez vos codes de secours`,backupCodesWarning:`Conservez ces codes en lieu sûr. Chaque code ne peut être utilisé qu'une seule fois et ne sera plus affiché.`,backupCodesRemaining:`{{count}} codes de secours restants`,savedCodes:`Codes sauvegardés`,regenBackup:`Régénérer les codes de secours`,regenBackupHint:`Entrez votre code TOTP actuel pour générer 10 nouveaux codes de secours. Tous les codes existants seront invalidés.`,newBackupCodes:`Nouveaux codes de secours`,linkedAccounts:`Comptes SSO liés`,linkedAccountsDesc:`Ces fournisseurs d'identité externes sont liés à votre compte.`,oidcUnlinked:`Compte dissocié.`},sessionPolicy:{title:`Politique de session`,description:`Durée maximale des sessions pour les nouvelles connexions utilisateur. Les jetons déjà émis conservent leur expiration d'origine.`,preset24h:`24 heures`,preset7d:`7 jours`,preset30d:`30 jours`,customHoursLabel:`Durée de session personnalisée en heures`,hoursSuffix:`heures`,warning:`Les sessions plus longues réduisent la protection de déconnexion automatique. Recommandé uniquement pour les déploiements mono-utilisateur de confiance.`},oidc:{title:`Fournisseurs SSO / OIDC`,desc:`Configurez des fournisseurs OpenID Connect pour l'authentification unique.`,addProvider:`Ajouter un fournisseur`,newProvider:`Nouveau fournisseur`,empty:`Aucun fournisseur OIDC configuré.`,created:`Fournisseur créé.`,updated:`Fournisseur mis à jour.`,deleted:`Fournisseur supprimé.`,refreshIcon:`Actualiser l'icône`,removeIcon:`Supprimer l'icône`,iconRefreshed:`Icône actualisée.`,iconRemoved:`Icône supprimée.`,iconFetchFailed:`Impossible de récupérer l'icône depuis l'URL du fournisseur.`,deleteTitle:`Supprimer le fournisseur`,deleteMessage:`Supprimer "{{name}}" ? Tous les comptes liés seront déconnectés.`,form:{name:`Nom d'affichage`,issuerUrl:`URL de l'émetteur`,clientId:`ID client`,clientSecret:`Secret client`,scopes:`Portées`,iconUrl:`URL de l'icône (optionnel)`,enabled:`Activé`,autoCreate:`Créer les utilisateurs automatiquement`,autoCreateDesc:`Crée automatiquement un compte local lors de la première connexion.`,autoLink:`Lier automatiquement les comptes existants`,autoLinkDesc:`Lie les comptes locaux existants par e-mail lors de la première connexion.`,secretHint:`laisser vide pour conserver`,secretPlaceholder:`nouveau secret`,emailClaim:`Claim e-mail`,emailClaimDesc:`Claim JWT utilisé comme identité e-mail. Utiliser 'preferred_username' ou 'upn' pour Azure Entra ID (qui n'envoie pas email_verified). Utiliser uniquement des noms de claims de confiance.`,emailClaimPlaceholder:`e-mail`,emailClaimCustomClaimAutoLinkWarning:`Les revendications personnalisées sont sûres pour la liaison auto uniquement lorsque la valeur est administrée par le tenant (par ex. Azure Entra ID upn / preferred_username). N'activez pas la liaison auto si votre IdP permet aux utilisateurs de s'auto-attribuer cette revendication.`,requireEmailVerified:`Exiger la vérification e-mail`,requireEmailVerifiedDesc:`N'accepter le claim e-mail que si le fournisseur le marque comme vérifié.`,requireEmailVerifiedWarning:`Avertissement : l'e-mail sera accepté sans vérification. À utiliser uniquement avec des fournisseurs de confiance.`,requireEmailVerifiedAutoLink:`Désactiver le lien automatique d'abord pour modifier ce paramètre.`,defaultGroup:`Groupe par défaut`,defaultGroupDesc:`Groupe attribué aux utilisateurs créés automatiquement. Repli sur Viewers si non défini.`,defaultGroupViewersFallback:`Viewers (par défaut)`,autologin:`Connexion automatique`,autologinDesc:`Rediriger les visiteurs non authentifiés directement vers ce fournisseur. Un seul fournisseur peut porter cet indicateur.`}},encryption:{title:`Statut du chiffrement MFA`,enabledFromEnv:`Chiffrement au repos activé (clé depuis la variable d'environnement MFA_ENCRYPTION_KEY)`,enabledFromFile:`Chiffrement au repos activé (clé chargée depuis le répertoire de données)`,enabledGenerated:`Chiffrement au repos activé avec une clé auto-générée`,notConfigured:`Chiffrement au repos non configuré`,notConfiguredDesc:`Les secrets TOTP et client_secrets OIDC sont stockés en clair. Définissez MFA_ENCRYPTION_KEY ou redémarrez Bambuddy avec un répertoire de données accessible en écriture pour en générer un automatiquement.`,allEncrypted:`Tous les secrets MFA sont chiffrés au repos.`,legacyRowsLabel:`Lignes héritées en clair`,encryptedRowsLabel:`Lignes chiffrées`,legacyRowsWarning:`{{count}} ligne(s) héritée(s) en clair détectée(s). Réenregistrez le fournisseur OIDC ou réinscrivez l'application d'authentification de l'utilisateur pour migrer vers le stockage chiffré.`,backupHint:`La clé auto-générée est stockée dans DATA_DIR/.mfa_encryption_key et incluse dans les ZIP de sauvegarde locale. Conservez vos sauvegardes en sécurité ou définissez MFA_ENCRYPTION_KEY explicitement.`,decryptionBrokenTitle:`Clé de chiffrement manquante`,decryptionBrokenError:`{{count}} enregistrement(s) chiffré(s) ne peuvent pas être déchiffrés car la clé de chiffrement n'est plus disponible. Restaurez le MFA_ENCRYPTION_KEY précédent ou DATA_DIR/.mfa_encryption_key pour récupérer.`,migrationErrorWarning:`{{count}} ligne(s) ancienne(s) n'ont pas pu être rechiffrée(s) au démarrage. Vérifiez les journaux du serveur et redémarrez Bambuddy pour réessayer.`},spoolbuddy:{infoTitle:`Périphériques SpoolBuddy`,infoBody:`Les bornes SpoolBuddy s'enregistrent automatiquement via heartbeat. Désinscrivez ici un appareil qui n'est plus utilisé ou un doublon obsolète laissé par un crash du daemon.`,duplicatesTitle:`{{count}} appareils enregistrés`,duplicatesBody:`Seul le premier appareil enregistré est utilisé par l'interface du kiosk. Si l'un de ces appareils est un doublon obsolète issu d'un crash, désinscrivez-le — un appareil en ligne se ré-enregistrera automatiquement au prochain heartbeat.`,empty:`Aucun appareil SpoolBuddy enregistré pour le moment.`,online:`En ligne`,offline:`Hors ligne`,unregister:`Désinscrire`,unregisterSuccess:`Appareil désinscrit`,unregisterError:`Échec de la désinscription`,confirmTitle:`Désinscrire l'appareil SpoolBuddy ?`,confirmBody:`Cela retirera "{{hostname}}" ({{deviceId}}) de la base de données. Si l'appareil est en ligne, il se ré-enregistrera automatiquement au prochain heartbeat.`,ipAddress:`Adresse IP`,firmware:`Micrologiciel`,lastSeen:`Dernière activité`,daemonUptime:`Uptime du daemon`,systemUptime:`Uptime système`,never:`jamais`,nfc:`NFC`,scale:`Balance`,cpuTemp:`Temp. CPU`,cpuLoad:`Charge CPU`,memory:`Mémoire`,disk:`Disque`,update:`Mettre à jour`,updateConfirmTitle:`Mettre à jour le daemon Spoolbuddy ?`,updateConfirmBody:`Déclencher une mise à jour logicielle sur "{{hostname}}" ? Le daemon redémarrera une fois la mise à jour appliquée.`,restartBrowser:`Redémarrer le navigateur`,restartBrowserConfirmTitle:`Redémarrer le navigateur du kiosk ?`,restartBrowserConfirmBody:`Redémarrer le navigateur du kiosk sur "{{hostname}}" ? L'écran sera momentanément vide.`,restartDaemon:`Redémarrer le daemon`,restartDaemonConfirmTitle:`Redémarrer le daemon Spoolbuddy ?`,restartDaemonConfirmBody:`Redémarrer le daemon Spoolbuddy sur "{{hostname}}" ? L'appareil sera hors ligne quelques secondes.`,reboot:`Redémarrer`,rebootConfirmTitle:`Redémarrer l'appareil ?`,rebootConfirmBody:`Redémarrer "{{hostname}}" ? L'appareil sera hors ligne pendant environ une minute.`,shutdown:`Éteindre`,shutdownConfirmTitle:`Éteindre l'appareil ?`,shutdownConfirmBody:`Éteindre "{{hostname}}" ? Vous aurez besoin d'un accès physique pour le rallumer.`,commandConfirm:`Confirmer`,commandQueued:`Commande en file d'attente`,commandError:`Échec de l'envoi de la commande`},pipelineLimits:{title:`Limites des pipelines du trancheur`,maxCopiesLabel:`Copies maximales par exécution`,maxCopiesDesc:`Limite supérieure du nombre de copies que les opérateurs peuvent demander lors de l'exécution d'un pipeline. La limite stricte côté serveur est 1000.`},pipelines:{title:`Pipelines du Trancheur`,subtitle:`Lots de préréglages réutilisables (imprimante + processus + filaments + type de plateau). Enregistrez-en un depuis le dialogue Trancher et appliquez-le en un clic au fichier suivant.`,loading:`Chargement des pipelines…`,loadError:`Impossible de charger les pipelines.`,confirmDelete:`Supprimer ce pipeline ? Cela ne peut pas être annulé.`,staleWarning:`Un ou plusieurs préréglages référencés n'existent plus. Réenregistrez ce pipeline depuis le dialogue Trancher pour le corriger.`,empty:{title:`Aucun pipeline pour le moment.`,howto:`Ouvrez le dialogue Trancher pour n'importe quel fichier, choisissez imprimante / processus / filaments / plateau, puis cliquez sur « Enregistrer comme pipeline ». Vos pipelines enregistrés apparaîtront ici.`},field:{name:`Nom du pipeline`,description:`Description`,targetPrinter:`Imprimante cible`,noTarget:`— Aucune cible —`,targetKind:`Type de cible`,targetKindSpecific:`Imprimante spécifique`,targetKindClass:`Classe d'imprimante`,targetModelClass:`Modèle d'imprimante`,fanoutStrategy:`Stratégie de distribution`,fanout:{max_parallel:`Max parallèle — distribuer sur toute imprimante libre correspondante`,round_robin:`Round robin — alterner entre imprimantes éligibles`,fill_one_first:`Remplir une d'abord — épingler toutes les copies à une imprimante`},fanoutShort:{max_parallel:`parallèle`,round_robin:`round robin`,fill_one_first:`remplir une`}},action:{save:`Enregistrer`,cancel:`Annuler`,rename:`Renommer`,delete:`Supprimer`},slot:{printer:`Imprimante`,process:`Processus`,filament:`Filament`,filamentN:`Filament {{n}}`,filamentAll:`Tous les {{n}} emplacements`,bed:`Plateau`},group:{profiles:`Profils`,filaments:`Filaments`},searchPlaceholder:`Rechercher des pipelines…`,filterTargetType:`Filtrer par type de cible`,filterTarget:`Filtrer par cible`,filter:{all:`Toutes les cibles`,noTarget:`Aucune cible`,count:`{{shown}} / {{total}}`,noMatches:`Aucun pipeline ne correspond aux filtres actuels.`},toast:{saved:`Pipeline enregistré`,saveFailed:`Échec de l'enregistrement`,deleted:`Pipeline supprimé`,deleteFailed:`Échec de la suppression`},noTargetHint:`Définissez une imprimante cible pour exécuter`,noTargetWarning:`Définissez une imprimante cible avant d'exécuter ce pipeline.`,runs:{lastRun:`Dernière exécution`,status:{queued:`en file`,slicing:`tranchage`,dispatching:`envoi`,in_progress:`impression`,completed:`terminé`,failed:`échec`,partial_failure:`échec partiel`,cancelled:`annulé`}}}},notification:{printStarted:{title:`Impression démarrée`,body:`{{printer}} : {{filename}} commence l'impression`},printCompleted:{title:`Impression terminée`,body:`{{printer}} : {{filename}} a réussi`},printFailed:{title:`Impression échouée`,body:`{{printer}} : {{filename}} a échoué`},printStopped:{title:`Impression arrêtée`,body:`{{printer}} : {{filename}} a été arrêtée`},printProgress:{title:`Progression d'impression`,body:`{{printer}} : {{filename}} est à {{percent}}%`},printerOffline:{title:`Imprimante hors ligne`,body:`{{printer}} est déconnectée`},printerError:{title:`Erreur imprimante`,body:`{{printer}} : {{error}}`},filamentLow:{title:`Filament bas`,body:`{{printer}} : Le filament est presque vide`},maintenanceDue:{title:`Maintenance due`,body:`{{printer}} : {{items}} demandent votre attention`}},errors:{generic:`Une erreur est survenue`,networkError:`Erreur réseau. Vérifiez votre connexion.`,notFound:`Non trouvé`,unauthorized:`Non autorisé`,serverError:`Erreur serveur`,validationError:`Vérifiez vos saisies`,printerConnectionFailed:`Échec connexion imprimante`,saveFailed:`Échec enregistrement`,deleteFailed:`Échec suppression`,loadFailed:`Échec chargement`},hmsErrors:{title:`Erreurs - {{name}}`,noErrors:`Aucune erreur`,viewOnWiki:`Voir sur le Wiki Bambu Lab`,mqttVerifyFailedRemedy:`Activez le mode developpeur sur l'imprimante, redemarrez l'imprimante, puis relancez la tache.`,unknownCode:`Code HMS inconnu — consultez le wiki Bambu Lab pour plus de détails.`,clearInstructions:`Effacez les erreurs sur l'imprimante pour les retirer ici.`,clearErrors:`Effacer les erreurs`,clearSuccess:`Erreurs HMS effacées`,clearFailed:`Échec de l'effacement des erreurs HMS`,actionSuccess:`Action envoyée à l'imprimante`,actionFailed:`Échec de l'envoi de l'action`,runoutExpectedSlot:`Le filament est épuisé dans {{ranOut}}. L'imprimante attend maintenant du filament compatible dans {{expected}}. Insérez une bobine dans {{expected}}, puis sélectionnez Réessayer.`,runoutExpectedSlotOnly:`L'imprimante attend du filament compatible dans {{expected}}. Insérez-y une bobine, puis sélectionnez Réessayer.`,runoutSlotUnknown:`Le filament est épuisé et l'impression est en pause. Bambuddy n'a pas pu déterminer quel emplacement l'imprimante attend désormais — vérifiez l'écran de l'imprimante pour l'emplacement demandé.`,actions:{RESUME_PRINTING:`Reprendre l'impression`,RESUME_PRINTING_DEFECTS:`Reprendre (défauts acceptables)`,RESUME_PRINTING_PROBELM_SOLVED:`Reprendre (problème résolu)`,STOP_PRINTING:`Arrêter l'impression`,CHECK_ASSISTANT:`Ouvrir l'assistant`,FILAMENT_EXTRUDED:`Filament extrudé, continuer`,RETRY_FILAMENT_EXTRUDED:`Pas encore extrudé, réessayer`,CONTINUE:`Terminé, continuer`,LOAD_VIRTUAL_TRAY:`Charger le filament`,OK_BUTTON:`OK`,FILAMENT_LOAD_RESUME:`Filament chargé, reprendre`,JUMP_TO_LIVEVIEW:`Voir en direct`,NO_REMINDER_NEXT_TIME:`Ne plus rappeler la prochaine fois`,REFRESH_NOZZLE:`Revérifier`,IGNORE_NO_REMINDER_NEXT_TIME:`Ignorer et ne plus rappeler`,IGNORE_RESUME:`Ignorer et reprendre`,PROBLEM_SOLVED_RESUME:`Problème résolu, reprendre`,TURN_OFF_FIRE_ALARM:`Compris, désactiver l'alarme incendie`,RETRY_PROBLEM_SOLVED:`Réessayer (problème résolu)`,CANCLE:`Annuler`,STOP_DRYING:`Arrêter le séchage`,PROCEED:`Continuer`,OK_JUMP_RACK:`OK`,ABORT:`Annuler`,DISABLE_PURIFICATION:`Désactiver la purification pour cette impression`,DONT_REMIND_NEXT_TIME:`Ne plus me rappeler`,DBL_CHECK_CANCEL:`Annuler`,DBL_CHECK_DONE:`Terminé`,DBL_CHECK_RETRY:`Réessayer`,DBL_CHECK_RESUME:`Reprendre`,DBL_CHECK_OK:`Confirmer`,REMOVE_CLOSE_BTN:`Fermer`}},mqttDebug:{title:`Journal de débogage MQTT`,searchPlaceholder:`Chercher topic ou message...`,noMessages:`Aucun message enregistré`,startLoggingHint:`Cliquez sur "Démarrer" pour capturer les messages MQTT`,noMessagesMatch:`Aucun message ne correspond`,adjustFilterHint:`Ajustez votre recherche`,incoming:`Entrant`,outgoing:`Sortant`,loggingStopped:`Enregistrement arrêté`,loggingActive:`Enregistrement actif - rafraîchissement auto`,startLogging:`Démarrer`,stopLogging:`Arrêter`,clearLog:`Effacer le journal`,topic:`Sujet`,timestamp:`Horodatage`,direction:`Direction`,all:`Tous`},printerFiles:{zipStarted_one:`Téléchargement ZIP de {{count}} fichier démarré`,zipStarted_other:`Téléchargement ZIP de {{count}} fichiers démarré`,zipPartial:`Le téléchargement ZIP a démarré avec {{successful}} fichiers sur {{total}} ; les autres n’ont pas pu être récupérés`,downloadFailed:`Échec du téléchargement : {{error}}`,unknownError:`Erreur inconnue`,shiftSelectHint:`Maj-clic pour sélectionner une plage`,selectFile:`Sélectionner {{name}}`,deselectFile:`Désélectionner {{name}}`,title:`Gestionnaire de fichiers`,storageUsed:`Utilisé :`,storageFree:`Libre :`,filterPlaceholder:`Filtrer les fichiers...`,deleteButton:`Supprimer`,deleteFiles:`Supprimer {{count}} fichiers`,deleteFileConfirm:`Supprimer "{{name}}" ?`,deleteFilesConfirm:`Supprimer les {{count}} fichiers sélectionnés ?`,noFiles:`Aucun fichier sur l'imprimante`,printerUnavailable:`Le service de fichiers de l'imprimante est indisponible. Réessayez lorsque l'imprimante est accessible.`,loadingFiles:`Chargement...`,failedToLoad:`Échec chargement fichiers`,toast:{filesDeleted:`{{count}} fichier(s) supprimé(s)`,deleteFailed:`Échec suppression : {{error}}`}},confirm:{delete:`Voulez-vous vraiment supprimer cet élément ?`,unsavedChanges:`Changements non sauvegardés. Voulez-vous quitter ?`,clearQueue:`Voulez-vous vraiment vider la file d'attente ?`},login:{title:`Connexion Bambuddy`,subtitle:`Connectez-vous à votre compte`,username:`Utilisateur`,usernamePlaceholder:`Entrez votre utilisateur`,usernameOrEmail:`Utilisateur ou Email`,usernameOrEmailPlaceholder:`Utilisateur ou @ Email`,password:`Mot de passe`,passwordPlaceholder:`Entrez votre mot de passe`,signIn:`Se connecter`,signingIn:`Connexion...`,rememberMe:`Se souvenir de moi`,forgotPassword:`Mot de passe oublié ?`,autologinFailed:`La connexion SSO automatique a échoué. Choisissez un fournisseur ci-dessous pour continuer.`,localDisabledNotice:`La connexion locale est désactivée. Utilisez l'un des fournisseurs SSO ci-dessous.`,loginSuccess:`Connecté avec succès`,loginFailed:`Échec de connexion`,enterCredentials:`Entrez vos identifiants`,enterEmail:`Veuillez entrer votre adresse e-mail`,oidcLoginFailed:`Échec de la connexion OIDC`,oidcErrors:{providerError:`Le fournisseur d'identité a renvoyé une erreur`,missingParameters:`Il manque des paramètres requis dans le callback OIDC`,invalidState:`L'état OIDC est invalide ou a déjà été utilisé`,stateExpired:`La session OIDC a expiré — veuillez réessayer`,providerNotFound:`Fournisseur OIDC introuvable`,discoveryFailed:`Impossible de récupérer le document de découverte OIDC`,invalidDiscovery:`Le document de découverte OIDC est invalide`,networkError:`Erreur réseau lors de l'échange de jeton OIDC`,badResponse:`Réponse inattendue lors de l'échange de jeton OIDC`,noIdToken:`Le fournisseur OIDC n'a pas renvoyé de jeton d'identité`,validationFailed:`La validation du jeton OIDC a échoué`,nonceMismatch:`Le nonce OIDC ne correspond pas — possible attaque par rejeu`,missingSubClaim:`Le jeton OIDC est dépourvu de la revendication sub`,noLinkedAccount:`Aucun compte local est lié à cette identité OIDC`,accountInactive:`Votre compte est inactif`,userResolutionFailed:`Impossible de résoudre votre compte`,internalError:`Une erreur interne est survenue lors de la connexion OIDC`,tokenExchangeFailed:`L'échange de jeton OIDC a échoué`},forgotPasswordTitle:`Mot de passe oublié`,forgotPasswordMessage:`Contactez votre administrateur pour réinitialiser votre accès.`,forgotPasswordEmailMessage:`Entrez votre email pour recevoir un nouveau mot de passe.`,emailAddress:`Adresse Email`,emailPlaceholder:`votre.email@exemple.com`,cancel:`Annuler`,sending:`Envoi...`,sendResetEmail:`Envoyer l'email`,howToReset:`Comment réinitialiser :`,resetStep1:`Contactez votre admin Bambuddy`,resetStep2:`Demandez une réinitialisation dans la Gestion Utilisateurs`,resetStep3:`Il vous donnera un mot de passe temporaire`,resetStep4:`Connectez-vous et changez-le dans les Paramètres`,gotIt:`Compris`,twoFA:{title:`Authentification à deux facteurs`,subtitle:`Votre compte est protégé par la 2FA. Saisissez le code de vérification ci-dessous.`,methodAuthenticator:`Application d'authentification`,methodEmail:`Code par e-mail`,methodBackup:`Code de récupération`,instructionsTotp:`Ouvrez votre application d'authentification et saisissez le code à 6 chiffres pour Bambuddy.`,instructionsEmail:`Un code à 6 chiffres a été envoyé à votre adresse e-mail. Il est valable 10 minutes.`,instructionsEmailNotSent:`Cliquez ci-dessous pour recevoir un code de vérification par e-mail.`,instructionsBackup:`Saisissez l'un de vos codes de récupération à 8 caractères. Chaque code ne peut être utilisé qu'une seule fois.`,sendCodeButton:`Envoyer le code par e-mail`,sendingCode:`Envoi en cours...`,resendCode:`Renvoyer le code`,codeLabel:`Code de vérification`,backupCodeLabel:`Code de récupération`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Vérifier`,verifyingButton:`Vérification en cours...`,backToLogin:`← Retour à la connexion`,orContinueWith:`ou continuer avec`,signInWith:`Se connecter avec {{provider}}`,enterCode:`Veuillez entrer le code de vérification`,sendCodeFailed:`Échec de l'envoi du code de vérification`,invalidCode:`Code invalide. Veuillez réessayer.`},resetPassword:{title:`Définir un nouveau mot de passe`,subtitle:`Saisissez et confirmez votre nouveau mot de passe ci-dessous.`,newPassword:`Nouveau mot de passe`,newPasswordPlaceholder:`Au moins 8 caractères`,confirmPassword:`Confirmer le mot de passe`,confirmPasswordPlaceholder:`Répéter le nouveau mot de passe`,saving:`Enregistrement…`,submit:`Définir le mot de passe`,backToLogin:`Retour à la connexion`,passwordsDoNotMatch:`Les mots de passe ne correspondent pas`,passwordTooShort:`Le mot de passe doit contenir au moins 8 caractères`,resetFailed:`Échec de la réinitialisation. Le lien a peut-être expiré.`}},setup:{title:`Configuration Bambuddy`,subtitle:`Configurez l'authentification`,enableAuth:`Activer l'authentification`,adminAccount:`Compte Admin`,adminAccountDesc:`Si des admins existent, ils seront utilisés. Sinon, créez-en un ci-dessous.`,adminUsername:`Utilisateur Admin`,adminPassword:`Mot de passe Admin`,optionalIfAdminExists:`(optionnel si admin existe)`,adminUsernamePlaceholder:`Nom admin (optionnel)`,adminPasswordPlaceholder:`Mdp admin (optionnel)`,confirmPassword:`Confirmer mdp`,confirmPasswordPlaceholder:`Confirmez mdp admin`,settingUp:`Configuration...`,completeSetup:`Terminer la configuration`,toast:{authEnabledAdminCreated:`Authentification activée et admin créé`,authEnabledExistingAdmins:`Authentification activée avec admins existants`,setupCompleted:`Configuration terminée`,enterBothCredentials:`Entrez les deux ou laissez vide pour utiliser les admins existants`,passwordsDoNotMatch:`Les mots de passe ne correspondent pas`,passwordTooShort:`Minimum 6 caractères`}},changePassword:{title:`Changer le mot de passe`,currentPassword:`Mot de passe actuel`,currentPasswordPlaceholder:`Entrez mdp actuel`,newPassword:`Nouveau mot de passe`,newPasswordPlaceholder:`Nouveau mdp (min 6 char)`,confirmPassword:`Confirmer nouveau mdp`,confirmPasswordPlaceholder:`Confirmez nouveau mdp`,passwordsDoNotMatch:`Les mots de passe ne correspondent pas`,passwordTooShort:`Minimum 6 caractères`,changing:`Changement...`,success:`Mot de passe modifié`,failed:`Échec modification`},plateAlert:{title:`Impression en Pause !`,message:`Objets détectés sur le plateau. L'impression a été suspendue automatiquement. Videz le plateau avant de reprendre.`,understand:`J'ai compris`},camera:{title:`Vue Caméra`,invalidPrinterId:`ID imprimante invalide`,live:`Direct`,snapshot:`Instantané`,restartStream:`Redémarrer le flux`,refreshSnapshot:`Rafraîchir l'image`,fullscreen:`Plein écran`,exitFullscreen:`Quitter plein écran`,connectingToCamera:`Connexion caméra...`,capturingSnapshot:`Capture...`,connectionLost:`Connexion perdue`,connectionFailed:`Échec connexion caméra`,reconnecting:`Reconnexion dans {{countdown}}s... (essai {{attempt}}/{{max}})`,reconnectNow:`Reconnexion immédiate`,cameraUnavailable:`Caméra indisponible`,cameraUnavailableDesc:`Vérifiez que l'imprimante est allumée.`,noCamera:`Aucune caméra disponible`,retry:`Réessayer`,cameraStream:`Flux caméra`,zoomOut:`Zoom arrière`,zoomIn:`Zoom avant`,resetZoom:`Réinitialiser zoom`,recording:`Enregistrement`,startRecording:`Démarrer l'enregistrement`,stopRecording:`Arrêter l'enregistrement`,chamberLight:`Basculer lumière chambre`,unavailable:`Caméra indisponible`,diagnose:{button:`Diagnostic`,modalTitle:`Diagnostic de la caméra`,running:`Diagnostic en cours...`,runFailed:`Impossible d'exécuter le diagnostic : {{error}}`,retry:`Relancer`,stage:{tcp_reachable:`Accessibilité réseau`,first_frame:`Capture d'image`,live_stream_active:`Flux en direct actif`},summary:{all_ok:`La caméra fonctionne. Toutes les étapes du diagnostic ont réussi.`,live_stream_active_healthy:`La caméra diffuse actuellement avec des images récentes — aucun test nécessaire.`,printer_unreachable:`L'imprimante n'est pas joignable. Vérifiez l'adresse IP, la connexion réseau et que l'imprimante est allumée.`,camera_port_closed:`L'imprimante répond mais le port de la caméra est fermé. Assurez-vous que le mode LAN et le mode développeur sont activés dans les paramètres de l'imprimante.`,no_frame:`Connexion à la caméra établie mais aucune image reçue. Réessayez ou vérifiez que la caméra est activée dans les paramètres de l'imprimante.`,unknown_failure:`Le diagnostic de la caméra a échoué pour une raison inconnue. Consultez le journal de support pour plus de détails.`},meta:{protocol:`Protocole`,port:`Port`,profile:`Profil`}}},groups:{title:`Gestion des Groupes`,subtitle:`Gérez les permissions pour le contrôle d'accès`,backToSettings:`Retour aux paramètres`,createGroup:`Créer un groupe`,noPermission:`Accès refusé.`,system:`Système`,noDescription:`Pas de description`,usersCount:`{{count}} utilisateurs`,permissionsCount:`{{count}} permissions`,edit:`Modifier`,delete:`Supprimer`,toast:{created:`Groupe créé`,updated:`Groupe mis à jour`,deleted:`Groupe supprimé`,enterGroupName:`Entrez un nom de groupe`},modal:{editGroup:`Modifier le groupe`,createGroup:`Créer un groupe`,cancel:`Annuler`,saving:`Enregistrement...`,creating:`Création...`,saveChanges:`Enregistrer`},form:{groupName:`Nom du groupe`,groupNamePlaceholder:`Nom du groupe`,systemGroupWarning:`Les groupes système sont fixes`,description:`Description`,descriptionPlaceholder:`Description (optionnel)`,permissions:`Permissions ({{count}} sélectionnées)`},deleteModal:{title:`Supprimer le groupe`,message:`Les utilisateurs de ce groupe perdront ces permissions.`,confirm:`Supprimer`},editor:{title:`Modifier le groupe`,createTitle:`Créer un groupe`,search:`Rechercher des permissions...`,selectAll:`Tout sélectionner`,clearAll:`Tout désélectionner`,permissionsSelected:`{{count}} sélectionnée(s)`,noResults:`Aucune permission ne correspond à votre recherche`,websocketHint:`Requis pour les mises à jour en direct. Sans cette permission, l'interface bascule sur une actualisation périodique.`}},users:{title:`Gestion des Utilisateurs`,subtitle:`Gérez les accès à Bambuddy`,backToSettings:`Retour aux paramètres`,createUser:`Créer un utilisateur`,noPermission:`Accès refusé.`,admin:`Administrateur`,noGroups:`Aucun groupe`,active:`Actif`,inactive:`Inactif`,edit:`Modifier`,delete:`Supprimer`,system:`Système`,noGroupsAvailable:`Aucun groupe disponible`,table:{username:`Utilisateur`,groups:`Groupes`,status:`Statut`,actions:`Actions`},toast:{created:`Utilisateur créé`,updated:`Utilisateur mis à jour`,deleted:`Utilisateur supprimé`,fillRequired:`Remplissez les champs requis`,passwordsDoNotMatch:`Les mots de passe ne correspondent pas`,passwordTooShort:`Minimum 6 caractères`,ldapProvisioned:`Utilisateur LDAP "{{username}}" provisionné`},modal:{createUser:`Créer utilisateur`,editUser:`Modifier utilisateur`,cancel:`Annuler`,creating:`Création...`,saving:`Enregistrement...`,saveChanges:`Enregistrer`,advancedAuthSubtitle:`avec Authentification Avancée`,tabsAriaLabel:`Source utilisateur`,localTab:`Local`,ldapTab:`LDAP`,ldapSearchLabel:`Rechercher dans l'annuaire`,ldapSearchPlaceholder:`Tapez un nom d'utilisateur, un nom ou un e-mail...`,ldapMinChars:`Tapez au moins 2 caractères pour rechercher`,ldapTypeToSearch:`Commencez à taper pour rechercher dans l'annuaire LDAP`,ldapSearching:`Recherche dans l'annuaire...`,ldapNoResults:`Aucun utilisateur correspondant dans l'annuaire`,ldapSearchError:`Échec de la recherche dans l'annuaire. Vérifiez l'état du serveur LDAP.`,ldapAlreadyProvisioned:`Déjà provisionné`,ldapSelectedLabel:`Sélectionné`,ldapProvision:`Provisionner l'utilisateur`,ldapProvisioning:`Provisionnement...`,ldapErrorProvision:`Échec du provisionnement. Vérifiez l'état du serveur LDAP et réessayez.`},form:{username:`Utilisateur`,usernamePlaceholder:`Nom utilisateur`,email:`E-mail`,emailPlaceholder:`utilisateur@exemple.com`,password:`Mot de passe`,passwordPlaceholder:`Mot de passe`,confirmPassword:`Confirmer mdp`,confirmPasswordPlaceholder:`Confirmez mdp`,newPasswordPlaceholder:`Nouveau mdp`,confirmNewPasswordPlaceholder:`Confirmez nouveau mdp`,leaveBlankToKeep:`Laissez vide pour conserver l'actuel`,groups:`Groupes`,optional:`optionnel`,autoGeneratedPassword:`Un mot de passe sera généré et envoyé par email.`,passwordManagedByAdvancedAuth:`Géré par Auth Avancée. Utilisez "Réinitialiser" pour envoyer un nouveau mdp par email.`,resetPassword:`Réinitialiser le mot de passe`,resettingPassword:`Réinitialisation...`},deleteModal:{title:`Supprimer utilisateur`,message:`Cette action est irréversible.`,confirm:`Supprimer`}},streamOverlay:{title:`Superposition Flux`,invalidPrinterId:`ID invalide`,cameraStream:`Flux caméra`,progress:`Progression`,eta:`Fin estimée`,printerIdle:`Imprimante inactive`,printerOffline:`Imprimante hors ligne`,builder:{title:`Incrustation de diffusion`,description:`Compose l'URL d'une incrustation de diffusion — une vue caméra plein écran avec les données d'impression en direct par-dessus, pour OBS, un écran mural ou toute source navigateur. Choisissez les champs voulus et copiez l'URL.`,printer:`Imprimante`,size:`Taille du texte`,sizeSmall:`Petite`,sizeMedium:`Moyenne`,sizeLarge:`Grande`,fps:`Fréquence d'images`,fpsHint:`Les caméras A1 et P1 plafonnent autour de 5 images par seconde, quelle que soit la valeur demandée.`,token:`Jeton d'incrustation (facultatif)`,tokenHint:`Nécessaire uniquement si la connexion est activée : OBS n'a pas de session. Créez-en un ci-dessus avec la portée Incrustation de diffusion.`,tokenWarning:`Cette URL contient un jeton — quiconque peut la lire peut voir le flux et le nom du fichier. Révoquez le jeton pour couper l'accès.`,fields:`Champs à afficher`,fieldPrinter:`Nom de l'imprimante`,fieldFilename:`Nom du fichier`,fieldStatus:`Statut`,fieldProgress:`Barre de progression`,fieldLayers:`Nombre de couches`,fieldEta:`Temps restant et heure de fin`,fieldCamera:`Flux caméra`,chamberHint:`La température du caisson n'apparaît que sur les modèles dotés d'un vrai capteur — les P1 et A1 renvoient une valeur sans signification, elle est donc omise.`,urlTitle:`URL de l'incrustation`,open:`Ouvrir`,showPreview:`Afficher l'aperçu`,hidePreview:`Masquer l'aperçu`,previewTitle:`Aperçu de l'incrustation`},status:{printing:`Impression`,paused:`En pause`,finished:`Terminée`,failed:`Échouée`,idle:`Inactive`,unknown:`Inconnue`}},profiles:{title:`Profils`,subtitle:`Gérez vos presets slicer et calibrations Pressure Advance`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Profils Locaux`,kprofiles:`Profils K`},orcaCloud:{connectedAs:`Connecté en tant que`,connectedShort:`Connecté à Orca Cloud`,logout:`Déconnecter`,noLogoutPermission:`Vous n'avez pas la permission de vous déconnecter`,noConnectPermission:`Vous n'avez pas la permission de vous connecter à Orca Cloud`,retry:`Réessayer`,connectButton:`Connecter Orca Cloud`,connect:{title:`Se connecter à Orca Cloud`,description:`Connectez-vous à votre compte Orca Cloud pour synchroniser vos profils de slicer dans Bambuddy.`},device:{title:`Approuver Bambuddy dans Orca Cloud`,instruction:`Ouvrez Orca Cloud et approuvez ce code. Bambuddy se connecte automatiquement dès que vous l'approuvez.`,codeLabel:`Votre code d'appairage`,openButton:`Ouvrir la page d'approbation d'Orca Cloud`,manualHint:`Ou rendez-vous sur {{url}} et saisissez le code ci-dessus.`,waiting:`En attente de votre approbation…`,cancel:`Annuler`},profiles:{title:`Vos profils Orca Cloud ({{count}})`,refresh:`Actualiser`,empty:`Aucun profil trouvé dans votre compte Orca Cloud pour le moment.`},toast:{disconnected:`Déconnecté d'Orca Cloud`},errors:{startFailed:`Impossible de démarrer la connexion à Orca Cloud.`,denied:`L'appairage a été refusé dans Orca Cloud.`,expired:`Le code d'appairage a expiré. Cliquez sur Connecter pour réessayer.`,pollFailed:`La connexion a été perdue pendant l'attente de l'approbation. Veuillez réessayer.`}},localProfiles:{title:`Profils Locaux`,subtitle:`Gérez vos presets OrcaSlicer`,import:`Importer Profils`,importDesc:`Déposez les fichiers .bbscfg, .bbsflmt, .orca_filament, .zip ou .json`,importing:`Importation...`,search:`Chercher un preset...`,noPresets:`Aucun preset local`,noSearchResults:`Aucun preset ne correspond à votre recherche`,badge:`Local`,edit:`Modifier`,delete:`Supprimer`,cancel:`Annuler`,deleteConfirmTitle:`Supprimer Preset`,deleteConfirm:`Supprimer définitivement ce preset ?`,source:`Source`,inheritsFrom:`Hérite de`,filamentType:`Type`,vendor:`Vendeur`,compatiblePrinters:`Imprimantes`,nozzleTemp:`Temp Buse`,cost:`Coût`,density:`Densité`,pressureAdvance:`Pressure Advance`,filament:`Filament`,process:`Processus`,printer:`Imprimante`,toast:{importSuccess:`{{count}} profil(s) importé(s)`,importSkipped:`{{count}} profil(s) ignoré(s) (doublons)`,importError:`{{count}} erreur(s) d'import`,deleted:`Preset supprimé`,updated:`Preset mis à jour`}},connectedAs:`Connecté en tant que`,signInExpiredTitle:`Session Bambu Cloud expirée`,signInExpiredBody:`Bambu Lab n'accepte plus le jeton enregistré. Reconnectez-vous pour rétablir les profils cloud, les imports MakerWorld et la vérification des firmwares.`,logout:`Déconnexion`,noLogoutPermission:`Pas d'autorisation de déconnexion`,failedToLoad:`Échec chargement profils`,retry:`Réessayer`,time:{justNow:`À l'instant`,minsAgo:`Il y a {{count}}m`,hoursAgo:`Il y a {{count}}h`,daysAgo:`Il y a {{count}}j`},toast:{loggedOut:`Déconnecté`},login:{title:`Connexion Bambu Cloud`,subtitle:`Synchronisez vos presets slicer`,email:`E-mail`,password:`Mot de passe`,region:`Région`,regionGlobal:`Global`,regionChina:`Chine`,verificationCode:`Code de vérification`,totpCode:`Code Authenticator`,checkEmail:`Code envoyé à {{email}}`,enterTotpHint:`Entrez le code 2FA`,accessToken:`Jeton d'accès (Access Token)`,accessTokenHint:`Collez votre jeton Bambu Cloud. Les comptes de la région Chine doivent passer par ici (liés à un numéro de téléphone — pas de connexion par e-mail). Le wiki explique comment récupérer le jeton depuis les cookies MakerWorld.`,back:`Retour`,loginButton:`Connexion`,verifyButton:`Vérifier`,setTokenButton:`Définir Jeton`,useToken:`Utiliser jeton d'accès`,captchaTitle:`Bambu Cloud demande un CAPTCHA`,captchaBody:`Bambu impose un CAPTCHA à votre réseau avant d'accepter une connexion, et ce défi ne peut pas être résolu depuis Bambuddy. Votre e-mail et votre mot de passe ne sont pas en cause. Le blocage est lié à votre adresse IP publique et disparaît généralement de lui-même en quelques heures ; réessayer sans cesse le prolonge. Pour vous connecter maintenant, utilisez plutôt un jeton d'accès issu d'une session de navigateur.`,useEmail:`Connexion par email`,toast:{loggedIn:`Connecté avec succès`,codeSent:`Code envoyé par email`,enterTotp:`Entrez le code Authenticator`,tokenSet:`Jeton défini`}},presets:{myPreset:`Mon preset (modifiable)`,duplicate:`Dupliquer`,editable:`Modifiable`,failedToLoadDetails:`Échec détails preset`,deleteConfirm:`Supprimer ce preset ?`,deleteWarning:`Ceci supprimera "{{name}}" de Bambu Cloud définitivement.`,noDuplicatePermission:`Pas d'autorisation duplication`,noEditPermission:`Pas d'autorisation modification`,noDeletePermission:`Pas d'autorisation suppression`,types:{filament:`Preset filament`,printer:`Preset imprimante`,process:`Preset processus`},toast:{deleted:`Preset supprimé`,created:`Preset créé`,updated:`Preset mis à jour`,duplicated:`Preset dupliqué`,fieldAdded:`Champ "{{key}}" ajouté`,exported:`Preset exporté`},baseLabel:`Base : {{name}}`,currentLabel:`Actuel : {{name}}`,newPreset:`Nouveau Preset`,editPreset:`Modifier Preset`,duplicatePreset:`Dupliquer Preset`,createNewPreset:`Créer un nouveau Preset`,customizeSettings:`Personnalisez vos réglages`,compareWithBase:`Comparer avec la base`,compare:`Comparer`,basePreset:`Preset de base`,selectBasePreset:`Choisir preset de base...`,presetName:`Nom du preset`,myCustomPreset:`Mon preset personnalisé`,inheritsFrom:`Hérite de`,dropJsonToImport:`Glissez JSON pour importer`,tabs:{common:`Commun`,allFields:`Tous les champs`},availableFields:`Champs disponibles`,searchFieldsPlaceholder:`Chercher un champ...`,noMatchingFields:`Aucun champ trouvé`,allFieldsAdded:`Tous les champs sont ajoutés`,addCustomField:`Ajouter un champ personnalisé`,yourOverrides:`Vos modifications`,noOverridesYet:`Aucune modification`,clickFieldsToAdd:`Cliquez à gauche pour ajouter`,saveAsTemplate:`Enregistrer comme modèle`,jsonTip:`Conseil : Glissez un .json pour importer les réglages`},cloudView:{searchPlaceholder:`Chercher presets...`,templates:`Modèles`,refresh:`Rafraîchir`,newPreset:`Nouveau Preset`,clearFilters:`Effacer filtres`,compareMode:`Mode Comparaison`,selectAnotherPreset:`Choisir un autre preset {{type}}`,clickTwoPresets:`Choisissez deux presets de même type`,selectFirst:`1. Sélectionner premier`,selectSecond:`2. Sélectionner second`,compareNow:`Comparer maintenant`,lastSynced:`Synchronisé :`,showingCount:`{{showing}} sur {{total}} presets`,noPresetsFound:`Aucun preset trouvé`,columns:{filament:`Filament`,process:`Processus`,printer:`Imprimante`},noFilamentPresets:`Pas de preset filament`,noProcessPresets:`Pas de preset processus`,noPrinterPresets:`Pas de preset imprimante`,filters:{type:`Type`,owner:`Propriétaire`,printer:`Imprimante`,nozzle:`Buse`,filament:`Filament`,layer:`Couche`,all:`Tous`,myPresets:`Mes Presets`,builtIn:`Inclus`,process:`Processus`},noTemplatesPermission:`Pas d'autorisation modèles`,noRefreshPermission:`Pas d'autorisation rafraîchissement`,noCreatePermission:`Pas d'autorisation création`},templates:{title:`Modèles rapides`,noTemplates:`Aucun modèle`,createFirst:`Créez-en depuis l'éditeur de preset`,typeFilter:`Type :`,deleteTitle:`Supprimer modèle`,deleteWarning:`Action irréversible`,deleteConfirm:`Supprimer "{{name}}" ?`,namePlaceholder:`Nom du modèle`,descriptionPlaceholder:`Description`,settingsJson:`Paramètres (JSON)`,fieldsCount:`{{count}} champs`,shownInModals:`Visible dans fenêtres`,hiddenInModals:`Masqué dans fenêtres`,apply:`Appliquer`,toast:{deleted:`Modèle supprimé`,updated:`Modèle mis à jour`,created:`Modèle créé`,applied:`Modèle appliqué`}}},support:{debugLoggingActive:`Débogage actif`,manageLogs:`Gérer`,collectItem7:`Connectivité et versions firmware`,collectItem8:`Statut intégrations (Spoolman, MQTT, HA)`,collectItem9:`Interfaces réseau (sous-réseaux)`,collectItem10:`Versions packages Python`,collectItem11:`Santé base de données`,collectItem12:`Détails environnement Docker`,bundleGenerating:`Génération du paquet...`,bundleStepConnection:`Vérification de la connectivité des imprimantes`,bundleStepVirtualPrinters:`Vérification de la configuration des imprimantes virtuelles`,bundleStepLogScan:`Analyse des journaux récents pour les problèmes connus`,bundleStepBuild:`Création du ZIP du paquet de support`},fileManager:{variants:{badge:`Versions : {{count}}`,groupAction:`Grouper comme versions`,groupTooltip:`Marquer ces fichiers comme le même travail tranché pour différentes imprimantes`,grouped:`{{count}} fichiers groupés comme versions`,printAlternatives:`Imprimer ({{count}} alternatives)`},title:`Gestionnaire de fichiers`,subtitle:`Organisez vos fichiers d'impression`,uploadFiles:`Téléverser fichiers`,newFolder:`Nouveau dossier`,folderName:`Nom du dossier`,folderNamePlaceholder:`ex: Pièces Utiles`,renameFile:`Renommer fichier`,renameFolder:`Renommer dossier`,invalidFilenameChar:`Le caractère "{{char}}" n'est pas autorisé dans les noms de fichier d'impression. La carte SD de l'imprimante refuse : < > : " / \\ | ? *`,moveFiles:`Déplacer {{count}} fichier(s)`,rootNoFolder:`Racine (aucun dossier)`,current:`actuel`,linkFolder:`Lier le dossier`,linkFolderDescription:`Lier "{{name}}" à un projet ou archive.`,project:`Projet`,archive:`Archive`,noProjectsFound:`Aucun projet trouvé`,noArchivesFound:`Aucune archive trouvée`,unlink:`Délier`,link:`Lier`,dragDropFiles:`Glissez les fichiers ici`,dropFilesHere:`Déposez ici`,releaseToUpload:`Relâcher pour téléverser`,orClickToBrowse:`ou cliquez pour parcourir`,allFileTypesSupported:`Tous types supportés. ZIP extraits.`,zipFilesDetected:`ZIP détectés`,zipExtractOptions:`Choix de structure pour ZIP :`,preserveZipStructure:`Garder structure ZIP`,createFolderFromZip:`Dossier par nom du ZIP`,stlThumbnailGeneration:`Vignettes STL`,zipMayContainStl:`Extraction vignettes possible pour STL.`,thumbnailsCanBeGenerated:`Génération vignettes (peut être long).`,generateThumbnailsForStl:`Générer vignettes STL`,threemfDetected:`Fichiers 3MF détectés`,threemfExtractionInfo:`Réglages extraits auto du 3MF.`,willBeExtracted:`Sera extrait`,filesExtracted:`{{count}} fichiers extraits`,uploadComplete:`Terminé : {{succeeded}} succès`,uploadFailed:`Échec du téléversement`,zipFilesFailed:`{{count}} fichiers échoués`,uploading:`Téléversement...`,changeLink:`Modifier lien...`,linkTo:`Lier à...`,linkToProjectOrArchive:`Lier à projet ou archive`,generateThumbnail:`Générer vignette`,generateThumbnails:`Générer vignettes`,generateThumbnailsForMissing:`Vignettes STL manquantes`,gridView:`Grille`,listView:`Liste`,lowDiskSpaceWarning:`Espace disque faible`,lowDiskSpaceDetails:`{{free}} libre sur {{total}}. Seuil : {{threshold}} Go.`,files:`Fichiers`,folders:`Dossiers`,size:`Taille`,free:`Libre`,allFiles:`Tous les fichiers`,allExternal:`Externes`,externalIsEmpty:`Aucun fichier externe`,externalEmptyDescription:`Les fichiers de vos dossiers externes liés apparaîtront ici.`,wrap:`Retour ligne`,enableTextWrapping:`Activer retour ligne`,disableTextWrapping:`Désactiver retour ligne`,collapse:`Réduire`,collapseFoldersByDefault:`Réduire les dossiers par défaut`,expandFoldersByDefault:`Développer les dossiers par défaut`,folderSort:`Trier les dossiers`,folderSortByName:`Par nom`,folderSortByActivity:`Par activité récente`,dragToResizeTooltip:`Glisser pour redimensionner, double-clic reset`,searchFiles:`Chercher fichiers...`,searchSubfoldersHint:`Sous-dossiers inclus`,readme:{truncated:`Tronqué`,show:`Afficher le README`,hide:`Masquer le README`,label:`README`},tags:{title:`Étiquettes`,subtitle:`Étiquetez les fichiers pour des filtres transversaux — jouets, adapté aux enfants, PETG uniquement, etc.`,manage:`Étiquettes`,manageTitle:`Gérer le catalogue d'étiquettes`,add:`Nouvelle étiquette`,edit:`Renommer l'étiquette`,name:`Nom`,fileCount:`Fichiers`,empty:`Aucune étiquette pour le moment. Créez-en une pour commencer.`,noMatches:`Aucune étiquette correspondante.`,createPlaceholder:`ex. jouets, kid-safe, petg`,createButton:`Créer`,nameRequired:`Le nom est requis.`,searchPlaceholder:`Filtrer les étiquettes...`,created:`Étiquette créée.`,updated:`Étiquette renommée.`,deleted:`Étiquette supprimée.`,saveFailed:`Impossible d'enregistrer l'étiquette.`,deleteFailed:`Impossible de supprimer l'étiquette.`,applyFailed:`Impossible d'appliquer les étiquettes.`,applyAdd:`Ajouter des étiquettes`,applyRemove:`Retirer des étiquettes`,applyAddSuccess:`{{count}} étiquette(s) ajoutée(s) sur {{files}} fichier(s).`,applyRemoveSuccess:`{{count}} étiquette(s) retirée(s) sur {{files}} fichier(s).`,actionAdd:`Ajouter aux fichiers sélectionnés`,actionRemove:`Retirer des fichiers sélectionnés`,tagAction:`Étiqueter`,bulkTitle:`Étiqueter {{count}} fichier(s) sélectionné(s)`,bulkTooltip:`Ajouter ou retirer des étiquettes sur chaque fichier sélectionné.`,noPermission:`Vous n'avez pas la permission d'étiqueter les fichiers.`,filterLabel:`Filtré par :`,clearAll:`Tout effacer`,confirmDelete:`Supprimer l'étiquette « {{name}} » ?`,confirmDeleteMessage:`Cela supprime l'étiquette du catalogue. Les fichiers conservent leurs autres étiquettes.`,confirmDeleteInUseMessage:`Cette étiquette est sur {{count}} fichier(s). La suppression la retire de tous ; les fichiers eux-mêmes ne sont pas touchés.`,editAria:`Modifier {{name}}`,deleteAria:`Supprimer {{name}}`},allTypes:`Tous types`,prints:`Impressions`,ascending:`Croissant`,descending:`Décroissant`,showModified:`Afficher les dates de modification`,hideModified:`Masquer les dates de modification`,lastModified:`Dernière modification`,lastActivity:`Dernière activité`,resultsCount:`{{showing}} sur {{total}} fichiers`,selectAll:`Tout sélectionner`,deselectAll:`Tout désélectionner`,selected:`{{count}} sélectionnés`,adding:`Ajout...`,loadingFiles:`Chargement...`,folderIsEmpty:`Dossier vide`,noFilesYet:`Aucun fichier`,folderEmptyDescription:`Téléversez ou déplacez des fichiers ici.`,noFilesDescription:`Téléversez des fichiers pour organiser.`,noMatchingFiles:`Aucun fichier correspondant`,noMatchingFilesDescription:`Ajustez votre recherche.`,clearFilters:`Effacer filtres`,printedCount:`Imprimé {{count}}x`,uploadedBy:`Téléversé par`,deleteFolder:`Supprimer dossier`,deleteFile:`Supprimer fichier`,deleteFilesCount:`Supprimer {{count}} fichiers`,deleteFolderConfirm:`Supprimer le dossier et son contenu ?`,deleteFileConfirm:`Supprimer ce fichier ?`,deleteFilesConfirm:`Supprimer {{count}} fichiers définitivement ?`,deleting:`Suppression...`,noPermissionRenameFolder:`Pas d'autorisation renommage`,noPermissionLinkFolder:`Pas d'autorisation lien`,noPermissionDeleteFolder:`Pas d'autorisation suppression dossier`,onlyEmptyFoldersDeletable:`Vous ne pouvez supprimer que les dossiers vides`,noPermissionPrint:`Pas d'autorisation impression`,noPermissionSlice:`Vous n'avez pas la permission de découper des fichiers`,noPermissionAddToQueue:`Pas d'autorisation file`,noPermissionDownload:`Pas d'autorisation téléchargement`,noPermissionPreview:`Vous n'avez pas la permission de prévisualiser les fichiers`,preview3d:`Aperçu 3D`,noPermissionRenameFile:`Pas d'autorisation renommage fichier`,noPermissionGenerateThumbnail:`Pas d'autorisation vignettes`,noPermissionDeleteFile:`Pas d'autorisation suppression fichier`,noPermissionCreateFolder:`Pas d'autorisation nouveau dossier`,noPermissionUpload:`Pas d'autorisation téléversement`,noPermissionMoveFiles:`Pas d'autorisation déplacement`,noPermissionDeleteFiles:`Pas d'autorisation suppression groupée`,linkExternal:`Lier externe`,linkExternalFolder:`Lier un dossier externe`,linkExternalFolderDescription:`Monter un répertoire hôte (NAS, USB, partage réseau) dans le gestionnaire de fichiers. Les fichiers ne sont pas copiés — ils sont lus directement depuis le chemin d'origine.`,externalFolderNamePlaceholder:`ex. Impressions NAS`,externalPath:`Chemin hôte`,externalPathHelp:`Chemin absolu du répertoire sur l'hôte Docker. Doit être monté en bind dans le conteneur.`,readOnly:`Lecture seule`,readOnlyHelp:`empêche les téléversements et suppressions`,showHiddenFiles:`Afficher les fichiers cachés (fichiers point)`,externalFolder:`Dossier externe`,scanFolder:`Scanner`,toast:{folderCreated:`Dossier créé`,openInSlicerFailed:`Impossible d'ouvrir dans le slicer`,folderDeleted:`Dossier supprimé`,fileDeleted:`Fichier supprimé`,filesDeleted:`{{count}} fichiers supprimés`,filesMoved:`Fichiers déplacés`,folderLinked:`Dossier lié`,folderUnlinked:`Dossier délié`,externalFolderLinked:`Dossier externe lié et scanné`,folderScanned:`Scan terminé : {{added}} ajoutés, {{removed}} supprimés`,addedToQueue:`{{count}} fichier(s) ajouté(s)`,addedToQueuePartial:`{{added}} ajoutés, {{failed}} échecs`,failedToAddToQueue:`Échec ajout file : {{error}}`,fileRenamed:`Fichier renommé`,folderRenamed:`Dossier renommé`,thumbnailsGenerated:`{{count}} vignette(s) générée(s)`,thumbnailsGeneratedPartial:`{{succeeded}} succès, {{failed}} échecs`,noStlMissingThumbnails:`Aucun STL sans vignette`,failedToGenerateThumbnails:`Échec vignettes : {{error}}`,thumbnailGenerated:`Vignette générée`,failedToGenerateThumbnail:`Échec vignette : {{error}}`}},projects:{parentLabel:`Projet parent`,parentNone:`Aucun (projet de premier niveau)`,parentHint:`Imbriquer ce projet dans un autre pour que ses chiffres remontent vers un projet principal`,partOf:`Fait partie de {{name}}`,subProjectCount:`{{count}} sous-projets`,subProjectsOf:`Sous-projets de {{name}}`,collapseSubProjects:`Réduire les sous-projets`,expandSubProjects:`Développer les sous-projets`,title:`Projets`,subtitle:`Suivez vos projets d'impression 3D`,newProject:`Nouveau Projet`,editProject:`Modifier Projet`,deleteProject:`Supprimer Projet`,projectName:`Nom du Projet`,description:`Description`,noProjects:`Aucun projet`,noProjectsFiltered:`Aucun projet {{status}}`,noProjectsFilteredHelp:`Vous n'avez aucun projet "{{status}}". Les projets apparaîtront ici lorsque leur statut changera.`,createFirst:`Créez votre premier projet pour organiser vos builds.`,createFirstButton:`Créer votre premier projet`,create:`Créer`,files:`Fichiers`,prints:`Impressions`,plates:`plateaux`,parts:`pièces`,lastModified:`Modifié le`,deleteConfirm:`Supprimer ce projet ? Les archives seront déliées mais conservées.`,addFiles:`Ajouter fichiers`,removeFile:`Retirer fichier`,viewDetails:`Détails`,namePlaceholder:`ex: Build Voron 2.4`,descriptionPlaceholder:`Description optionnelle...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`L'URL doit commencer par http:// ou https://`,openExternalUrl:`Ouvrir l’URL du projet`,coverImageLabel:`Photo de couverture`,coverImageAlt:`Photo de couverture du projet`,coverImageUpload:`Téléverser`,coverImageReplace:`Remplacer`,coverImageRemove:`Supprimer`,color:`Couleur`,targetPlates:`Plateaux cibles`,targetPlatesPlaceholder:`ex: 25`,targetPlatesHelp:`Nombre total de jobs`,targetParts:`Pièces cibles`,targetPartsPlaceholder:`ex: 150`,targetPartsHelp:`Nombre total d'objets`,targetSets:`Copies par fichier`,targetSetsPlaceholder:`ex. 10`,targetSetsHelp:`Nombre d'impressions de chaque fichier imprimable`,tagsLabel:`Tags (séparés par virgules)`,tagsPlaceholder:`ex: voron, cadeau`,dueDate:`Échéance`,priority:`Priorité`,priorityLow:`Basse`,priorityNormal:`Normale`,priorityHigh:`Haute`,priorityUrgent:`Urgente`,statusActive:`Actif`,statusCompleted:`Terminé`,statusArchived:`Archivé`,done:`Fait`,completed:`terminé`,failed:`échoué`,inQueue:`en file`,noPrintsYet:`Aucune impression`,printJobs:`Jobs (plateaux)`,partsPrinted:`Pièces imprimées`,failedParts:`Pièces échouées`,import:`Importer`,export:`Exporter`,importProject:`Importer projet`,exportAll:`Exporter tous les projets`,loading:`Chargement des projets...`,noEditPermission:`Pas d'autorisation de modification`,noDeletePermission:`Pas d'autorisation de suppression`,noCreatePermission:`Pas d'autorisation de création`,noImportPermission:`Pas d'autorisation d'import`,noExportPermission:`Pas d'autorisation d'export`,toast:{created:`Projet créé`,updated:`Projet mis à jour`,deleted:`Projet supprimé`,imported:`Projet importé`,multipleImported:`{{count}} projets importés`,importFailed:`Échec d'import`,exported:`Projets exportés (métadonnées)`}},projectDetail:{notFound:`Projet non trouvé`,backToProjects:`Retour aux Projets`,export:`Exporter`,exportProject:`Exporter projet`,noExportPermission:`Pas d'autorisation export`,noEditPermission:`Pas d'autorisation modification`,partOf:`Fait partie de :`,priorityLabel:`Priorité :`,noPrints:`Aucune impression dans ce projet`,status:{active:`Actif`,completed:`Terminé`,archived:`Archivé`},priority:{low:`Basse`,normal:`Normale`,high:`Haute`,urgent:`Urgente`},dueDate:{overdue:`En retard`,today:`Aujourd'hui`,daysLeft:`{{count}} jours restants`},progress:{platesProgress:`Progression Plateaux`,partsProgress:`Progression Pièces`,setsProgress:`Jeux complets`,sets:`jeux`,setsHint:`Un jeu est complet quand chaque fichier imprimable atteint ce nombre`,printJobs:`jobs d'impression`,parts:`pièces`,percentComplete:`{{percent}}% terminé`,remaining:`{{count}} restant(s)`},stats:{printJobs:`Jobs d'Impression`,total:`total`,failed:`{{count}} échecs`,partsPrinted:`{{count}} pièces imprimées`,printTime:`Temps d'Impression`,filamentUsed:`Filament utilisé`},cost:{title:`Suivi des coûts`,filamentCost:`Coût Filament`,energy:`Énergie`,totalCost:`Coût Total`,total:`Total`,includesBom:`BOM incluse`,budget:`Budget`,remaining:`Restant`},subProjects:{title:`Sous-projets ({{count}})`,jobs:`{{count}} travaux`},rollup:{title:`Y compris {{count}} sous-projets`,progress:`Progression globale`,percentComplete:`{{percent}}% terminé`},notes:{title:`Notes`,noEditPermission:`Pas d'autorisation modification`,placeholder:`Ajouter des notes...`,empty:`Aucune note. Cliquez sur modifier.`},files:{title:`Fichiers`,linkFolders:`Liez des dossiers depuis le gestionnaire`,forQuickAccess:`pour un accès rapide.`,fileCount:`{{count}} fichier(s)`,empty:`Aucun dossier lié.`,printedCount:`Imprimé {{count}} fois`,progressTooltip:`{{done}} sur {{target}} impressions terminées`,noFiles:`Aucun fichier dans ce dossier.`},bom:{title:`BOM (Liste matériel)`,acquired:`{{completed}}/{{total}} acquis`,showAll:`Tout afficher`,hideDone:`Masquer acquis`,addPart:`Ajouter matériel`,noAddPermission:`Pas d'autorisation ajout`,partNamePlaceholder:`Nom (ex: Vis M3x8)`,partName:`Nom de pièce`,qty:`Qté`,price:`Prix ({{currency}})`,sourcingUrlPlaceholder:`Lien d'achat (optionnel)`,remarksPlaceholder:`Remarques (optionnel)`,deletePart:`Supprimer pièce`,deleteConfirm:`Supprimer "{{name}}" ?`,noUpdatePermission:`Pas d'autorisation mise à jour`,noEditPermission:`Pas d'autorisation modification`,noDeletePermission:`Pas d'autorisation suppression`,totalCost:`Coût total :`,empty:`BOM vide. Ajoutez du matériel ou de l'électronique.`},timeline:{title:`Historique d'activité`,empty:`Aucune activité.`},template:{saveAsTemplate:`Enregistrer comme modèle`,noCreatePermission:`Pas d'autorisation modèle`},queue:{title:`File d'attente`,viewAll:`Tout voir`,printing:`{{count}} en cours`,queued:`{{count}} en file`},prints:{title:`Impressions ({{count}})`},toast:{projectUpdated:`Projet mis à jour`,partAdded:`Pièce ajoutée`,partRemoved:`Pièce retirée`,exportFailed:`Échec export`,projectExported:`Projet exporté`,templateCreated:`Modèle créé`}},system:{title:`Informations Système`,version:`Version`,uptime:`Temps de fonctionnement`,cpuUsage:`Utilisation CPU`,memoryUsage:`Utilisation RAM`,diskUsage:`Utilisation Disque`,networkInfo:`Infos Réseau`,logs:`Journaux`,debugMode:`Mode Débogage`,enableDebug:`Activer débogage`,disableDebug:`Désactiver débogage`,downloadLogs:`Télécharger logs`,clearLogs:`Effacer logs`,dockerInfo:`Infos Docker`,containerName:`Nom conteneur`,imageName:`Nom image`,platform:`Plateforme`,architecture:`Architecture`},sponsors:{sectionTitle:`Indépendant & financé par la communauté`,tagline:`Bambuddy est gratuit et le reste parce que des personnes choisissent de le soutenir. Pas de VC, pas de verrouillage cloud.`,viewSupporters:`Voir les soutiens`,toastPrints:`Tu as terminé {{count}} impressions avec Bambuddy. Bambuddy reste gratuit grâce à ceux qui le soutiennent.`,toastCost:`Tu as suivi {{total}} de filament avec Bambuddy. Vois qui garde le projet indépendant.`,toastArchives:`{{count}} impressions archivées avec Bambuddy. Vois qui le garde indépendant.`,toastAnniversary:`Un an avec Bambuddy ! Vois qui garde le projet indépendant.`,toastVersionUpdate:`Mis à jour vers v{{version}}. Bambuddy reste gratuit grâce à ceux qui le soutiennent.`,toastBusiness:`Vous utilisez Bambuddy sur {{count}} imprimantes ? Il existe une offre de support pour les équipes : corrections prioritaires, facturation et contact direct avec le mainteneur.`,businessCta:`Bambuddy pour les entreprises`,businessTitle:`Bambuddy pour les entreprises`,businessTagline:`Vous gérez {{count}} imprimantes. Support prioritaire, licences commerciales et facturation sont disponibles pour les équipes et les fermes d'impression.`},library:{title:`Bibliothèque Filament`,addFilament:`Ajouter Filament`,editFilament:`Modifier Filament`,deleteFilament:`Supprimer Filament`,vendor:`Vendeur`,material:`Matériau`,color:`Couleur`,kFactor:`Facteur K`,temperature:`Température`,noFilaments:`Bibliothèque vide`,deleteConfirm:`Supprimer ce filament ?`,importFromPrinter:`Importer de l'imprimante`,exportToFile:`Exporter vers fichier`,runWithPipeline:{actionLabel:`Exécuter avec un pipeline`,noPermission:`Vous n'avez pas la permission d'exécuter des pipelines`,modalTitle:`Exécuter avec un pipeline`,confirmTitle:`Confirmer l'exécution`,confirmIntro:`Le pré-vol a trouvé des problèmes avec cette exécution`,sourceHint:`Source`,pipelineHint:`Pipeline`,targetHint:`Cible`,pipelineListAria:`Pipelines disponibles`,runAnyway:`Exécuter quand même`,loading:`Chargement…`,empty:`Aucun pipeline enregistré pour le moment. Ouvrez le dialogue Trancher et cliquez sur « Enregistrer comme pipeline » pour en créer un.`,noTarget:`Aucune imprimante cible définie`,noTargetMessage:`Ce pipeline n'a pas d'imprimante cible. Ouvrez-le dans les Paramètres pour en choisir une.`,copies:`Copies`,copiesHint:`max {{n}}`,classTarget:`N'importe quel {{model}}`,toast:{started:`Exécution de pipeline démarrée`,failed:`Impossible de démarrer l'exécution`},issue:{printerNotSet:`Aucune imprimante cible définie pour ce pipeline.`,printerNotFound:`L'imprimante cible n'existe plus.`,printerDisabled:`L'imprimante cible est désactivée.`,printerOffline:`L'imprimante cible est hors ligne.`,filamentType:`Emplacement filament {{slot}} : attendu {{expected}}, AMS a {{actual}}`,filamentColor:`Emplacement filament {{slot}} : couleur différente (attendu {{expected}}, AMS a {{actual}})`,amsSlotMissing:`Emplacement AMS {{slot}} indisponible sur cette imprimante`,filamentUnverified:`L'emplacement filament {{slot}} provient d'un préréglage cloud / standard et n'a pas pu être vérifié statiquement.`,noClassMatches:`Aucune imprimante de cette installation ne correspond à la classe de modèle cible du pipeline ({{expected}}).`,classNotSet:`La cible du pipeline est une classe d'imprimante mais aucun modèle n'a été choisi.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Valeurs par défaut du trancheur affichées : votre sidecar est plus ancien que cette fonctionnalité et ne peut pas fournir les valeurs d'un profil. Mettez à jour l'image du sidecar pour les voir. Tout ce que vous ne modifiez pas utilise toujours le profil.`,presetValuesNotConfigured:`Valeurs par défaut du trancheur affichées : aucun sidecar n'est configuré, les valeurs d'un profil ne peuvent donc pas être lues. Tout ce que vous ne modifiez pas utilise toujours le profil.`,presetValuesSidecarUnavailable:`Valeurs par défaut du trancheur affichées : le sidecar n'a pas répondu, les valeurs d'un profil ne peuvent donc pas être lues. Tout ce que vous ne modifiez pas utilise toujours le profil.`,presetValuesUnavailable:`Valeurs par défaut du trancheur affichées : celles du profil choisi n'ont pas pu être lues. Tout ce que vous ne modifiez pas utilise toujours le profil.`,filamentDefault:`Par défaut`,fromFile:`du fichier`,fromFileHint:`Le concepteur a modifié ce paramètre dans le fichier source. Sa valeur est {{value}}.`,fromFilePrinterCoupled:`imprimante du concepteur`,fromFilePrinterCoupledHint:`Réglé pour l'imprimante pour laquelle ce fichier a été conçu — peut être incorrect ou hors plage sur la vôtre.`,fromFileOverridesPreset:`remplace le profil`,fromFileOverridesPresetHint:`Le fichier impose {{value}} alors que le profil choisi utilise {{preset}}. À cocher uniquement si le fichier doit primer.`,useFromFile:`Utiliser la valeur du fichier source pour {{option}}`,otherFromFile:`Autres paramètres de ce fichier`,fromFileSummary:`Le concepteur a modifié {{count}} réglages de process dans ce fichier. Seuls ceux que vous cochez sont utilisés.`,fromFileUseAll:`Utiliser les réglages du concepteur`,fromFileUseAllHint:`Coche les réglages transposables d'une imprimante à l'autre. Ceux calés sur l'imprimante du concepteur, et ceux qui définissent le profil choisi, restent décochés.`,fromFileClear:`Effacer {{count}}`,loading:`Chargement des paramètres du trancheur…`,mode:{simple:`Simple`,advanced:`Avancé`,expert:`Expert`},searchPlaceholder:`Rechercher un paramètre`,resetAll:`Réinitialiser {{count}}`,resetOption:`Réinitialiser à la valeur par défaut`,noMatches:`Aucun paramètre ne correspond à cette recherche.`},slice:{filamentSlotUnset:`non défini`,processSettingsEmbedded:`Inutilisé tant que « Utiliser les paramètres intégrés du fichier » est activé : ce sont les paramètres du fichier qui pilotent ce découpage.`,processSettingsInactive:`Inactif`,presetsHidden:`{{count}} masqués`,showAllPresets:`Tout afficher`,showFewerPresets:`Afficher moins`,processSettings:`Paramètres de process`,processSettingsHint:`Ajustez le profil choisi pour ce découpage. Tout ce que vous ne modifiez pas reste tel que défini par le profil.`,processSettingsChanged:`{{count}} modifiés`,processSettingsUnchanged:`Valeurs du profil`,title:`Slicer le modèle`,action:`Slicer`,actionAll:`Slicer les {{count}} plateaux`,actionAllTitle:`Slicer tous les plateaux dans une sortie multi-plateaux (une seule archive). La sélection de filament couvre chaque emplacement défini par le projet.`,allPlatesToggle:`Slicer les {{count}} plateaux`,slicing:`Découpage…`,printer:`Profil d'imprimante`,process:`Profil de processus`,filament:`Profil de filament`,filamentSlot:`Filament {{index}} – {{type}}`,filamentColour:`Couleur du filament`,selectPreset:`— Sélectionner un préréglage —`,loadingPresets:`Chargement des préréglages…`,analyzingPlateFilaments:`Analyse des filaments de la plaque…`,analyzingPlateFilamentsHint:`Exécution d'un découpage d'aperçu pour identifier les emplacements AMS utilisés. Mis en cache après — la réouverture est instantanée.`,previewToast:`Analyse de {{name}} – {{elapsed}}`,previewWithProgress:`Analyse de {{name}} – {{stage}} ({{percent}} %) – {{elapsed}}`,notUsedByPlate:`— non utilisé par cette plaque`,noPresetsForSlot:`Aucun préréglage disponible`,otherPrinters:`Autres imprimantes`,presetsLoadFailed:`Échec du chargement des préréglages. Ouvrez Paramètres → Profils pour les importer d'abord.`,refreshPresets:`Actualiser`,refreshPresetsTitle:`Actualiser les préréglages — récupérer les dernières listes Cloud et bundle (à utiliser après avoir supprimé un préréglage dans Bambu Studio ou Bambu Handy)`,allPresetsRequired:`Tous les préréglages doivent être sélectionnés`,useEmbedded:`Utiliser les réglages intégrés du fichier`,useEmbeddedHint:`Slicer tel que le concepteur l'a configuré (parois, remplissage, filament) au lieu des profils ci-dessus. Proposé car votre imprimante correspond à celle du fichier.`,autoOrient:`Orienter les objets automatiquement`,autoOrientHint:`Le trancheur fait pivoter chaque objet sur sa meilleure face d'impression avant de trancher. Remplace l'orientation enregistrée dans le fichier.`,autoArrange:`Disposer automatiquement sur le plateau`,autoArrangeHint:`Le trancheur place les objets pour qu'ils ne se chevauchent plus. Remplace la disposition du fichier.`,enqueuing:`Envoi du travail de découpage…`,queued:`En file d'attente…`,failed:`Échec du découpage. Vérifiez les journaux du sidecar.`,startedToast:`Découpage de {{name}} en arrière-plan…`,queuedToast:`En attente : {{name}} – {{elapsed}}`,runningToast:`Découpage {{name}} – {{elapsed}}`,runningWithProgress:`{{name}} – {{stage}} ({{percent}} %) – {{elapsed}}`,runningWithProgressMultiPlate:`Plateau {{plateIndex}} sur {{plateCount}} • {{name}} – {{stage}} ({{percent}} %) – {{elapsed}}`,completedToast:`{{name}} découpé`,externalWriteFallbackToast:`Enregistré dans la bibliothèque interne : impossible d'écrire dans le dossier externe`,failedTitle:`Échec du découpage`,failedToast:`Échec du découpage de {{name}} : {{detail}}`,tier:{local:`Importé`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Standard`},cloud:{notAuthenticated:`Connectez-vous à Bambu Cloud (Paramètres → Profils → Bambu Cloud) pour voir vos préréglages cloud.`,expired:`Session Bambu Cloud expirée – reconnectez-vous pour actualiser vos préréglages cloud.`,unreachable:`Bambu Cloud est inaccessible. Les préréglages locaux et standards fonctionnent encore.`},orcaCloud:{notAuthenticated:`Connectez-vous à Orca Cloud (Profils → Orca Cloud) pour voir vos préréglages Orca.`,expired:`Session Orca Cloud expirée — reconnectez-vous pour actualiser vos préréglages Orca.`,unreachable:`Orca Cloud est indisponible pour le moment. Les autres préréglages fonctionnent toujours.`},bedType:{label:`Plateau d'impression`,auto:`Auto (utiliser le préréglage de processus)`,coolPlate:`Cool Plate`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`},pipelines:{label:`Pipeline`,applyAria:`Appliquer le pipeline`,applyPrompt:`Appliquer un pipeline…`,empty:`Aucun pipeline enregistré`,saveButton:`Enregistrer comme pipeline`,saveTitle:`Enregistrer la sélection actuelle des quatre emplacements comme pipeline réutilisable`,namePlaceholder:`Nom du pipeline`,nameAria:`Nouveau nom de pipeline`,toast:{applied:`« {{name}} » appliqué`,saved:`Pipeline enregistré`,saveFailed:`Échec de l'enregistrement`}}},spoolman:{title:`Intégration Spoolman`,enabled:`Spoolman Activé`,url:`URL Spoolman`,connected:`Connecté`,disconnected:`Non Connecté`,testConnection:`Tester connexion`,sync:`Synchroniser`,syncing:`Sync...`,lastSync:`Dernière Sync`,linkToSpoolman:`Lier à Spoolman`,openInSpoolman:`Ouvrir Spoolman`,unlinkSpool:`Délier bobine`,unlinkConfirmTitle:`Désassigner la bobine ?`,unlinkConfirmMessage:`Cela retirera la bobine de cet emplacement. Les données de la bobine elles-mêmes resteront inchangées.`,selectSpool:`Choisir bobine`,noUnlinkedSpools:`Pas de bobine libre`,linkSuccess:`Bobine assignée avec succès`,linkFailed:`Échec de l’assignation`,unlinkSuccess:`Bobine désassignée avec succès`,unlinkFailed:`Échec du désassignement`,linkedSpool:`Bobine assignée`,spoolId:`ID Bobine`,fillSourceLabel:`(Spoolman)`,weight:`Poids`,remaining:`Restant`,disableWeightSync:`Désactiver Sync poids estimé AMS`,disableWeightSyncDesc:`Ne pas utiliser les estimations AMS. Utile si vous préférez le suivi Spoolman.`,reportPartialUsage:`Rapporter consommation partielle pour échecs`,reportPartialUsageDesc:`Si l'impression échoue, rapporte le filament consommé selon les couches.`},locations:{title:`Emplacements de stockage`,subtitle:`Gérez étagères, tiroirs et autres emplacements physiques pour vos bobines`,add:`Ajouter un emplacement`,addShort:`Ajouter`,edit:`Modifier l'emplacement`,name:`Nom`,spools:`Bobines`,sensors:`Capteurs`,empty:`Aucun emplacement de stockage. Créez votre première étagère ou tiroir.`,manage:`Emplacements`,createPlaceholder:`ex. Étagère A, Tiroir 1`,nameRequired:`Le nom de l'emplacement est requis`,created:`Emplacement créé`,updated:`Emplacement mis à jour`,deleted:`Emplacement supprimé`,saveFailed:`Échec de l'enregistrement de l'emplacement`,deleteFailed:`Échec de la suppression de l'emplacement`,deleteBlocked:`Retirez d'abord toutes les bobines de cet emplacement`,confirmDelete:`Supprimer « {{name}} » ?`,confirmDeleteMessage:`Cet emplacement sera retiré du catalogue. Déplacez d'abord les bobines.`,confirmDeleteMessageWithSensors:`Cet emplacement sera retiré du catalogue. Déplacez d'abord les bobines. Les capteurs connectés seront également supprimés.`},inventory:{title:`Inventaire de Bobines`,subtitle:`Gérez vos bobines`,addToInventory:`Ajouter à l'inventaire`,addToInventoryPending:`Ajout...`,addToInventorySuccess:`Bobine ajoutée à l'inventaire`,addToInventoryFailed:`Échec de l'ajout de la bobine à l'inventaire`,unknownSpoolTitle:`Nouveau filament détecté`,unknownSpoolMessage:`Une bobine avec un tag RFID inconnu a été détectée à {{location}}. L'ajouter à votre inventaire maintenant ?`,unknownSpoolSlot:`Emplacement`,bulk:{selectAllVisible:`Tout sélectionner (visible)`,selectRow:`Sélectionner la ligne`,selectGroup:`Sélectionner le groupe`,selectionCount:`{{count}} sélectionnée(s)`,edit:`Modifier`,printLabels:`Imprimer les étiquettes`,resetUsage:`Réinitialiser l'utilisation`,restore:`Restaurer`,archive:`Archiver`,delete:`Supprimer`,clearSelection:`Effacer la sélection`,editTitle:`Modification groupée des bobines`,editSubtitle:`S'applique à {{count}} bobines sélectionnées. Seuls les champs cochés seront mis à jour.`,editHint:`Tapez dans un champ pour le marquer comme à mettre à jour — seules les lignes cochées sont envoyées. Un champ laissé vide laisse les bobines inchangées (vider un champ se fait par bobine).`,useCustom:`Utiliser « {{value}} »`,toggleField:`Activer la mise à jour de ce champ`,changeCount:`{{count}} champ(s) seront mis à jour.`,applyPending:`Application...`,applyButton:`Appliquer à {{count}} bobines`,deleteTitle:`Supprimer les bobines sélectionnées`,archiveTitle:`Archiver les bobines sélectionnées`,restoreTitle:`Restaurer les bobines sélectionnées`,resetUsageTitle:`Réinitialiser l'utilisation des bobines sélectionnées`,deleteMessage:`Supprimer définitivement {{count}} bobines ? Cette action est irréversible.`,archiveMessage:`Archiver {{count}} bobines ? Elles pourront être restaurées plus tard.`,restoreMessage:`Restaurer {{count}} bobines archivées ?`,resetUsageMessage:`Réinitialiser le compteur « Total consommé » sur {{count}} bobines ? Le poids restant est préservé.`,updateSuccess:`{{count}} bobines mises à jour`,updateFailed:`Mise à jour groupée échouée`,updatePartial:`{{ok}} bobines mises à jour, {{failed}} échouées`,updateAllFailed:`Les {{count}} mises à jour ont échoué — la sélection est conservée pour réessayer`,deleteSuccess:`{{count}} bobines supprimées`,deleteFailed:`Suppression groupée échouée`,deletePartial:`{{ok}} bobines supprimées, {{failed}} échouées`,deleteAllFailed:`Les {{count}} suppressions ont échoué — la sélection est conservée pour réessayer`,archiveSuccess:`{{count}} bobines archivées`,archiveFailed:`Archivage groupé échoué`,archivePartial:`{{ok}} bobines archivées, {{failed}} échouées`,archiveAllFailed:`Les {{count}} archivages ont échoué — la sélection est conservée pour réessayer`,restoreSuccess:`{{count}} bobines restaurées`,restoreFailed:`Restauration groupée échouée`,restorePartial:`{{ok}} bobines restaurées, {{failed}} échouées`,restoreAllFailed:`Les {{count}} restaurations ont échoué — la sélection est conservée pour réessayer`,invalidHex:`Saisissez 6 caractères hex (RRVVBB) ou 8 (RRVVBBAA). Sinon le champ ne sera pas appliqué.`},spoolmanMixedContentTitle:`Spoolman ne peut pas se charger en HTTPS — contenu mixte bloqué par votre navigateur`,spoolmanMixedContentBody:`Bambuddy est servi en HTTPS (via votre reverse proxy), mais votre URL Spoolman est encore en HTTP. Les navigateurs bloquent le contenu mixte pour des raisons de sécurité, donc l'interface Spoolman intégrée ne peut pas s'afficher. Spoolman doit être accessible en HTTPS.`,spoolmanMixedContentFixReverseProxy:`Placez Spoolman derrière le même reverse proxy que Bambuddy (Traefik / Nginx / Caddy) en HTTPS, puis mettez à jour l'URL Spoolman dans les Paramètres avec la nouvelle adresse HTTPS.`,spoolmanMixedContentFixOpenNewTab:`Alternative : ouvrez Spoolman dans un nouvel onglet en HTTP — les règles de contenu mixte ne s'appliquent qu'aux cadres intégrés, un onglet autonome fonctionne.`,spoolmanOpenInNewTab:`Ouvrir Spoolman dans un nouvel onglet`,labels:{title:`Imprimer étiquettes de bobines`,selectedCount:`{{count}} sélectionné`,pickSpools:`Choisissez les bobines pour lesquelles imprimer des étiquettes :`,monochrome:`Monochrome (imprimante noir et blanc)`,monochromeHint:`Supprime la pastille de couleur et élargit le texte`,startingPosition:`Position de départ de l’étiquette`,startingPositionRange:`Modèles en feuille uniquement : L7160 accepte 1–21 ; 5160 accepte 1–30.`,startingPositionInvalid:`Saisissez un nombre entier de 1 à {{capacity}}.`,startingPositionFirst:`L’impression commence à la position 1.`,startingPositionSkipped:`Les positions 1 à {{lastPosition}} resteront vides sur la première feuille.`,startingPositionRangeError:`La position de départ doit être comprise entre 1 et {{capacity}} pour cette feuille.`,searchPlaceholder:`Rechercher par nom, marque ou #ID`,filterByMaterial:`Matériau :`,allMaterials:`Tout`,selectVisible:`Sélectionner tout visible ({{count}})`,deselectVisible:`Désélectionner visible`,clearAll:`Tout effacer`,noSpoolsToShow:`Aucune bobine à afficher. Ajustez votre filtre et réessayez.`,noMatches:`Aucune bobine ne correspond à la recherche ou au filtre actuel.`,printOne:`Imprimer l'étiquette de cette bobine`,printLabels:`Imprimer les étiquettes…`,bulkTitle:`Choisissez les bobines à étiqueter parmi les {{count}} affichées`,noSpoolsTitle:`Aucune bobine à étiqueter`,error:`Impossible de générer les étiquettes : {{msg}}`,sortBy:{label:`Trier :`,id:`Par ID`,color:`Par couleur`},templates:{amsHolderSmall:{label:`Support AMS — petit (74 × 33 mm)`,hint:`Une étiquette par page ; correspond à l'étiquette imprimable du modèle MakerWorld 752566 (Support d'étiquettes pour filament AMS).`},amsHolderLarge:{label:`Support AMS — grand (75 × 55 mm)`,hint:`Une étiquette par page ; s'adapte à la variante carton du support d'étiquettes pour filament AMS. Assez d'espace pour pastille, marque, matériau, ID et QR code.`},box40x30:{label:`Étiquette boîte (40 × 30 mm)`,hint:`Une étiquette par page ; taille de rouleau DK/Brother courante, idéale pour étiqueter sachets de filament et bacs de stockage.`},box:{label:`Box label (62 × 29 mm)`,hint:`Une étiquette par page ; dimensionnée pour Brother PT/QL et petites étiquettes Dymo.`},averyL7160:{label:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,hint:`Format de feuille UE ; 21 étiquettes par page A4.`},avery5160:{label:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,hint:`Format de feuille US ; 30 étiquettes par page Letter.`}}},csv:{importButton:`Importer CSV`,exportButton:`Exporter CSV`,modalTitle:`Importer des bobines depuis un CSV`,selectFile:`Choisissez un fichier CSV ou glissez-le ici`,dragHint:`En-tête : material (requis), brand, subtype, color_name, rgba, …`,parsing:`Lecture du fichier…`,previewError:`Impossible de lire le fichier CSV`,validCount:`{{count}} valides`,errorCount:`{{count}} en erreur`,skippedCount:`{{count}} ignorées`,colRow:`Ligne`,colStatus:`Statut`,colColor:`Couleur`,colorResolved:`Couleur remplie depuis le catalogue`,colorCrossMaterial:`Couleur reprise d'un autre matériau — aucune correspondance exacte dans le catalogue`,duplicateExisting:`Une bobine avec ce matériau, cette marque et cette couleur existe déjà — elle sera tout de même importée comme une nouvelle bobine`,spoolmanHint:`En mode Spoolman, utilisez l'import/export CSV intégré de Spoolman.`,importValidRows:`Importer {{count}} lignes valides`,noValidRows:`Aucune ligne valide`,importing:`Importation…`,importSuccess:`{{count}} bobines importées`,importError:`Échec de l'importation`,exportError:`Échec de l'exportation`},addSpool:`Ajouter Bobine`,editSpool:`Modifier Bobine`,copySpool:`Copier Bobine`,material:`Matériau`,selectMaterial:`Choisir matériau...`,subtype:`Sous-type`,brand:`Marque`,searchBrand:`Chercher marque...`,useCustomBrand:`Utiliser "{{brand}}"`,useCustomMaterial:`Utiliser un matériau personnalisé : {{material}}`,suggestedOptions:`Suggérés`,allOptions:`Tous`,colorName:`Nom de couleur`,colorNamePlaceholder:`Blanc Jade, Rouge Feu...`,color:`Couleur`,hexColor:`Code Hex`,pickColor:`Choisir couleur perso`,labelWeight:`Poids net`,coreWeight:`Poids bobine vide`,searchSpoolWeight:`Chercher poids bobine...`,weightUsed:`Consommé`,currentWeight:`Poids restant`,measuredWeight:`Poids mesuré`,spoolName:`Bobine`,costPerKg:`Coût par kg`,storageLocation:`Emplacement de stockage`,temperature:`Température`,humidity:`Humidité`,battery:`Batterie`,storageLocationPlaceholder:`ex. Étagère A, Tiroir 1`,openInInventory:`Ouvrir dans l'inventaire`,measuredWeightError:`Le poids mesuré doit être entre {{min}}g et {{max}}g.`,slicerFilament:`Filament Slicer`,slicerFilamentName:`Nom du Preset Slicer`,slicerPreset:`Preset Slicer`,searchPresets:`Chercher presets...`,selectedPreset:`Sélectionné`,noPresetsFound:`Aucun preset trouvé`,tempOverrides:`Exceptions Température`,note:`Note`,notePlaceholder:`Notes additionnelles sur cette bobine...`,category:`Catégorie`,categoryPlaceholder:`ex. Production, Prototype, Client A`,categoryNone:`Sans catégorie`,storageLocationNone:`Aucun emplacement défini`,lowStockThresholdOverride:`Seuil bas (cette bobine)`,lowStockThresholdOverrideHelp:`Laisser vide pour utiliser le seuil global ({{global}} %).`,clearRfid:`Effacer le tag RFID`,rfidCleared:`Tag RFID effacé`,archive:`Archiver`,restore:`Restaurer`,noSpools:`Aucune bobine. Ajoutez votre première bobine pour commencer.`,noAvailableSpools:`Aucune bobine disponible. Ajoutez une bobine à votre inventaire ou désaffectez-en une d'un autre emplacement.`,kProfiles:`Profils K`,addKProfile:`Ajouter K-Profile`,assignSpool:`Assigner Bobine`,unassignSpool:`Désassigner`,assignSuccess:`Bobine assignée et slot AMS configuré`,assignPendingInsert:`Assigné. Le slot sera configuré lors de l'insertion de la bobine.`,assignFailed:`Échec assignation`,selectSpool:`Choisir une bobine pour ce slot`,assigned:`Assigné`,assigning:`Assignation...`,searchSpools:`Chercher bobines...`,showAllSpools:`Afficher toutes les bobines`,spoolmanSpools:`Bobines Spoolman`,allMaterials:`Tous Matériaux`,filterByBrand:`Filtrer par marque...`,showArchived:`Afficher archivées`,quickAdd:`Ajout rapide (Stock)`,quantity:`Quantité`,stock:`Stock`,configured:`Configuré`,spoolsCreated:`{{count}} bobines créées`,spoolsPartiallyCreated:`{{created}} sur {{total}} bobines créées (certaines ont échoué)`,spoolCreated:`Bobine créée`,spoolUpdated:`Bobine mise à jour`,spoolDeleted:`Bobine supprimée`,deepLinkSpoolNotFound:`Bobine introuvable`,deepLinkFetchFailed:`Impossible de charger la bobine — réessayez`,spoolArchived:`Bobine archivée`,spoolRestored:`Bobine restaurée`,kProfileSaveFailed:`Les paramètres de profil K n'ont pas pu être enregistrés`,syncWeightSpoolNotFound:`Bobine introuvable — elle a peut-être été supprimée`,syncWeightSpoolmanUnreachable:`Spoolman est inaccessible — réessayez plus tard`,syncWeightFailed:`Échec de la synchronisation du poids`,spoolmanUnreachable:`Spoolman est inaccessible — veuillez réessayer plus tard`,deleteSpoolNotFound:`Bobine introuvable — elle a peut-être déjà été supprimée`,deleteFailed:`Impossible de supprimer la bobine`,archiveSpoolNotFound:`Bobine introuvable — elle a peut-être déjà été supprimée`,archiveFailed:`Impossible d'archiver la bobine`,restoreSpoolNotFound:`Bobine introuvable — elle a peut-être déjà été supprimée`,restoreFailed:`Impossible de restaurer la bobine`,saveFailed:`Impossible d'enregistrer les modifications`,tagClearFailed:`Impossible de supprimer le tag`,deleteConfirm:`Supprimer définitivement cette bobine ?`,archiveConfirm:`Voulez-vous vraiment archiver cette bobine ?`,advancedSettings:`Paramètres Avancés`,filamentInfoTab:`Infos Filament`,paProfileTab:`Profil PA`,colorAndCostTab:`Couleur et coût`,printersTab:`Imprimantes`,filamentInfo:`Filament`,additional:`Additionnel`,loadingPresets:`Chargement des presets cloud...`,cloudConnected:`Cloud connecté`,cloudNotConnected:`Cloud déconnecté (valeurs par défaut)`,recentColors:`Récentes`,searchColors:`Chercher couleurs...`,searchResults:`Résultats`,allColors:`Toutes`,commonColors:`Communes`,showLess:`Moins`,showAll:`Toutes`,noColorsFound:`Aucune couleur correspondante`,noResults:`Aucun résultat`,extraColorsLabel:`Couleurs supplémentaires`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Collez 2 à 8 stops hex, séparés par des virgules. Affiché en dégradé.`,extraColorsInvalid:`Hex non valides ignorés : {{tokens}}`,colorEffectLabel:`Effet`,colorEffect:{none:`Aucun`,sparkle:`Pailleté`,wood:`Bois`,marble:`Marbre`,glow:`Lueur`,matte:`Mat`,silk:`Soie`,galaxy:`Galaxie`,rainbow:`Arc-en-ciel`,metal:`Métal`,translucent:`Translucide`,gradient:`Dégradé`,dualColor:`Bicolore`,triColor:`Tricolore`,multicolor:`Multicolore`},selectMaterialFirst:`Veuillez choisir un matériau dans l'onglet Infos Filament.`,noPrintersConfigured:`Ajoutez une imprimante pour utiliser les profils PA.`,matchingFilter:`Correspondant`,anyBrand:`Toute marque`,anyVariant:`Toute variante`,autoSelect:`Auto-sélection`,matches:`correspondances`,match:`correspondance`,noMatches:`Aucune correspondance`,connected:`Connecté`,offline:`Hors ligne`,printerOffline:`Imprimante hors ligne. Connectez-vous pour voir les profils.`,noKProfilesMatch:`Aucun profil K ne correspond au filament.`,leftNozzle:`Buse Gauche`,rightNozzle:`Buse Droite`,profilesSelected:`profil(s) de calibration sélectionné(s)`,filamentPreset:`Préréglage de filament`,presetUseSpoolDefault:`Utiliser le préréglage de la bobine`,presetInherited:`hérité`,presetOverride:`personnalisé`,presetNeedsModel:`Cette imprimante n'a pas encore indiqué son modèle, elle ne peut donc pas avoir son propre préréglage.`,autoMatchPresets:`Association automatique`,autoMatchPresetsHint:`Trouver la variante du préréglage de la bobine qui nomme chaque modèle`,kProfilesPerPrinter:`Profils K`,kProfileNotSet:`Non défini`,kProfileFlowMismatch:`Ce profil a été mesuré avec une buse {{profile}} alors qu'une buse {{fitted}} est installée : il ne sera pas appliqué`,nozzle:`Buse`,unknownModel:`Modèle inconnu`,onePrinter:`1 imprimante`,nPrinters:`{{n}} imprimantes`,filamentPresetsLoadFailed:`Impossible de charger les préréglages par modèle de cette bobine`,filamentPresetSaveFailed:`Impossible d'enregistrer les préréglages par modèle`,totalInventory:`Total Inventaire`,totalConsumed:`Total Consommé`,byMaterial:`Par Matériau`,inPrinter:`Dans Imprimante`,lowStock:`Stock Bas`,sinceTracking:`Depuis le début du suivi`,resetConsumedCounter:`Réinitialiser le compteur`,resetConsumedCounterTooltip:`Remettre à zéro le compteur de grammes consommés pour cette bobine. Le poids restant n'est pas modifié.`,resetConsumedCounterConfirm:`Remettre à 0 le compteur de grammes consommés de cette bobine ? Les futures impressions repartiront de zéro. La bobine, son calcul de poids restant et vos paramètres ne sont pas modifiés.`,resetAllConsumedCounters:`Réinitialiser tous les compteurs`,resetAllConsumedCountersTooltip:`Remettre à zéro le compteur de grammes consommés sur chaque bobine. Les poids restants ne sont pas modifiés.`,resetAllConsumedCountersConfirm:`Remettre à 0 le compteur de grammes consommés sur les {{count}} bobines (archivées incluses) ? Cela efface la valeur « Total Consommé » pour que les futures impressions repartent de zéro. Les bobines et les poids restants ne sont pas modifiés.`,consumedCounterReset:`Compteur réinitialisé`,allConsumedCountersReset:`Compteur réinitialisé pour {{count}} bobine(s)`,resetConsumedCounterFailed:`Échec de la réinitialisation du compteur`,loadedInAms:`Chargé dans AMS/Ext`,remaining:`Restant`,weightCheck:`Vérification poids`,lastWeighed:`Dernière pesée`,neverWeighed:`Jamais pesé`,search:`Chercher bobines...`,showing:`Affichage`,to:`à`,of:`sur`,show:`Voir`,spools:`bobines`,spool:`bobine`,page:`Page`,noSpoolsMatch:`Aucun résultat trouvé`,noSpoolsMatchDesc:`Ajustez votre recherche ou vos filtres.`,active:`Actif`,archived:`Archivé`,all:`Tous`,used:`Occasion`,new:`Neuf`,clearFilters:`Effacer filtres`,table:`Tableau`,cards:`Cartes`,net:`Réseau`,groupSimilar:`Grouper`,groupedSpools:`{{count}} bobines identiques`,groupedRows:`lignes`,columns:`Colonnes`,configureColumns:`Configurer Colonnes`,configureColumnsDesc:`Glissez pour ordonner ou utilisez les flèches. Cliquez sur l'œil pour masquer.`,visible:`visible`,reset:`Réinitialiser`,cancel:`Annuler`,applyChanges:`Appliquer`,moveUp:`Monter`,moveDown:`Descendre`,hideColumn:`Masquer`,showColumn:`Afficher`,linkToSpool:`Lier à une Bobine`,tagLinked:`Tag lié à la bobine`,tagLinkFailed:`Échec lien tag`,tagAlreadyLinked:`Tag déjà lié à la bobine #{{id}}`,unknownTag:`Tag RFID inconnu détecté`,usageHistory:`Historique de Consommation`,noUsageHistory:`Aucune consommation enregistrée`,printName:`Nom Impression`,weightConsumed:`Poids consommé`,clearHistory:`Effacer`,historyCleared:`Historique effacé`,fillSourceLabel:`(Inv)`,lowStockThresholdError:`Le seuil doit être compris entre 0.1 et 99.9`,assignMismatchTitle:`Incompatibilité de matériau`,assignMismatchMessage:`Le matériau de la bobine sélectionnée "{{spoolMaterial}}" ne correspond pas au matériau du plateau "{{trayMaterial}}" pour {{location}}. Assigner quand même ?`,assignMismatchConfirm:`Assigner quand même`,assignPartialMismatchMessage:`Le matériau de la bobine "{{spoolMaterial}}" est similaire, mais ne correspond pas exactement à "{{trayMaterial}}" dans {{location}}. Voulez-vous continuer ?`,assignProfileMismatchMessage:`Le profil de la bobine "{{spoolProfile}}" ne correspond pas au profil du plateau "{{trayProfile}}" dans {{location}}. Voulez-vous continuer ?`,assignReconfigureNote:`Le slot AMS sera reconfiguré pour utiliser le profil de la bobine.`,spoolmanFilamentCatalog:`Catalogue de filaments Spoolman`,pickFromSpoolmanCatalog:`Choisir dans le catalogue Spoolman…`,spoolmanFilamentSelected:`Filament sélectionné depuis le catalogue Spoolman`,spoolmanFilamentUnlinked:`Lien avec le catalogue de filaments supprimé`,noSpoolmanFilaments:`Aucun filament trouvé dans le catalogue Spoolman`,spoolmanFilamentColorSwatch:`Couleur du filament`,spoolWeightManagedBySpoolman:`Le poids de la bobine vide est géré par type de filament dans Spoolman`,spoolmanCatalogLoadFailed:`Impossible de charger le catalogue Spoolman`},timelapse:{title:`Time-lapse`,create:`Créer Timelapse`,download:`Télécharger`,delete:`Supprimer`,preview:`Aperçu`,frameRate:`Images/sec`,quality:`Qualité`,processing:`Traitement...`,noTimelapses:`Aucun timelapse`},ams:{title:`AMS`,slot:`Emplacement`,empty:`Vide`,emptySlot:`Slot vide`,slotEmpty:`Vide`,slotUnconfigured:`?`,emptySlotReset:`Aucune bobine assignée`,unknown:`Inconnu`,humidity:`Humidité`,temperature:`Température`,filamentType:`Type filament`,filamentColor:`Couleur`,remaining:`Restant`,history:`Historique AMS`,noHistory:`Aucun historique`,configureSlot:`Configurer Slot`,externalSpool:`Bobine externe`,profile:`Profil`,kFactor:`Facteur K`,kFactorShort:`K`,fill:`Remplir`,configure:`Configurer`,used:`utilisé`,remainingUnit:`restant`},printModal:{variants:{editNote:`Ces alternatives ont été définies lors de la mise en file. Annulez et remettez en file pour les modifier.`,title:`Alternatives d'imprimante`,help:`Un travail, une place dans la file. La première imprimante compatible qui se libère imprime son fichier.`,unknownModel:`Modèle inconnu`,plateFor:`Plateau pour {{filename}}`,moveUp:`Monter`,moveDown:`Descendre`,queued:`Mis en file avec {{count}} alternatives`},selectPrinter:`Choisir l'imprimante`,selectPlate:`Choisir le plateau`,filamentMapping:`Mapping Filament`,useArchiveMapping:`Mappage`,useArchiveMappingTooltip:`Sélectionner tous les emplacements à partir du mappage AMS enregistré avec cette archive (depuis le slicer), au lieu de faire correspondre par type/couleur.`,clickToChangeSlot:`Cliquez pour modifier l'attribution de l'emplacement`,reRead:`Relire`,plateN:`Plateau {{n}}`,plateFilamentsUnreadable:`Les filaments d'un plateau sélectionné n'ont pas pu être lus, il est donc impossible de l'affecter. Désélectionnez-le pour mettre les autres en file.`,totalCost:`Coût total :`,slotRemainingShort:` - {{grams}}g rest.`,printSettings:`Réglages d'impression`,bedLeveling:`Nivellement plateau`,flowCalibration:`Calibration débit`,vibrationCalibration:`Vibration (Input Shaper)`,layerInspection:`Inspection 1ère couche`,timelapse:`Time-lapse`,cancel:`Annuler`,noPrintersAvailable:`Aucune imprimante disponible`,printerBusy:`L'imprimante est occupée`,printerOffline:`L'imprimante est hors ligne`,sameTypeDifferentColor:`Même type, couleur différente`,filamentTypeNotLoaded:`Type de filament non chargé`,statusReady:`Prêt`,statusColorMismatch:`Couleur différente`,statusTypeNotFound:`Type introuvable`,requiredTooltip:`Requis : {{name}} - {{color}}`,manuallySelected:`Sélectionné manuellement`,autoMatched:`Associé automatiquement`,selectSlot:`Choisir un emplacement`,exactColorMatch:`Correspondance exacte des couleurs`,slotForFilament:`Emplacement imprimante pour {{name}}`,overrideForFilament:`Remplacement de filament pour {{name}}`,sameTypeDifferentColorDetail:`Même type, couleur différente : requiert {{required}}, l’emplacement contient {{loaded}}`,requiredTypeNotInPrinter:`Type de filament requis introuvable dans l’imprimante.`,whenToPrint:`Quand imprimer`,asap:`Dès que possible`,queue:`File`,schedule:`Planifier`,dateTime:`Date et heure`,invalidDateTime:`Veuillez saisir une date et une heure valides`,openCalendar:`Ouvrir calendrier`,requireManualStart:`Démarrage manuel requis`,requirePreviousSuccess:`Démarrer seulement si l'impression précédente a réussi`,autoOffAfter:`Éteindre l'imprimante à la fin`,helpAsap:`L'impression sera ajoutée en haut de la file et démarrera dès qu'une imprimante éligible sera inactive.`,helpSchedule:`L'impression démarrera à l'heure planifiée si l'imprimante est inactive. Si elle est occupée, elle attendra qu'elle soit disponible.`,helpQueue:`L'impression sera ajoutée à la fin de la file.`,leftNozzle:`G`,rightNozzle:`D`,leftNozzleTooltip:`Buse gauche`,rightNozzleTooltip:`Buse droite`,ftsSameInletHint:`Tous les filaments de cette impression sont sur le sélecteur de chemin de filament IN-{{inlet}}. Changer entre des filaments d'une même entrée est plus lent — déplacez-en un vers un AMS de l'autre entrée.`,rackPosition:`Position du rack`,rackPositionTooltip:`Quelle buse du rack imprime ce filament. Les positions sont numérotées comme sur l'imprimante.`,rackEmptyPosition:`Cette position du rack est vide`,rackWrongNozzle:`Contient une buse {{has}} ; ce filament nécessite {{needs}}`,filamentOverride:`Remplacement de filament`,filamentOverrideHint:`Remplacez optionnellement les filaments pour l'affectation par modèle. Le planificateur utilisera vos filaments sélectionnés au lieu des valeurs 3MF d'origine.`,originalFilament:`Original`,overrideWith:`Remplacer par`,resetToOriginal:`Revenir à l'original`,insufficientFilamentTitle:`Filament insuffisant`,waitingForAmsStatus:`En attente de l'état de l'AMS de {{printer}}…`,insufficientFilamentMessage:`Certaines bobines assignées ont moins de filament restant que nécessaire pour cette impression :`,insufficientFilamentLine:`{{printer}} - {{slot}} : nécessite {{required}}g, restant {{remaining}}g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}} : nécessite {{required}}g, {{remaining}}g disponibles sur les bobines correspondantes (AMS Filament Backup)`,printAnyway:`Imprimer quand même`,forceColorMatch:`Forcer correspondance des couleurs`,staggerPrinterStarts:`Échelonner démarrages`,staggerGroupSize:`Taille du groupe`,staggerInterval:`Intervalle (min)`,staggerPreview:`{{printers}} imprimantes → {{groups}} groupes de {{size}}, démarrage toutes les {{interval}} min`,staggerLastGroup:`dernier groupe : {{count}}`,staggerTotal:`total : {{minutes}} min`,staggerToPrinters:`Échelonner sur {{count}} imprimantes`,gcodeInjection:`Injecter le G-code auto-impression`,insufficientBudget:`Budget insuffisant`,unlimitedNoBudget:`Illimité – aucune limite de budget n’est définie.`,noPrintableCostCenters:`Aucun centre de coûts actif n’est disponible pour l’impression. Demandez à un administrateur de vous accorder l’accès à l’impression.`},backup:{includesEncryptionKey:`Les sauvegardes locales incluent le fichier de clé de chiffrement MFA (DATA_DIR/.mfa_encryption_key), donc un ZIP de sauvegarde est autonome. Traitez le ZIP comme sensible — quiconque possède le fichier peut déchiffrer les secrets client OIDC et TOTP qu'il contient.`,title:`Sauvegarde & Restauration`,createBackup:`Créer Sauvegarde`,restoreBackup:`Restaurer Sauvegarde`,restoreDescription:`Remplace les données par un fichier de sauvegarde`,downloadBackup:`Télécharger Sauvegarde`,uploadBackup:`Téléverser Sauvegarde`,lastBackup:`Dernière sauvegarde`,autoBackup:`Sauvegarde auto`,backupNow:`Sauvegarder maintenant`,restoreWarning:`Attention : Écrase TOUTES les données actuelles.`,includeArchives:`Inclure Archives`,includeSettings:`Inclure Paramètres`,includeProfiles:`Inclure Profils`,backupSuccess:`Sauvegarde réussie`,restoreSuccess:`Restauration réussie`,backupFailed:`Échec sauvegarde`,restoreFailed:`Échec restauration`,restoreNote:`L'imprimante virtuelle sera arrêtée pendant la restauration`,githubBackup:`Sauvegarde GitHub`,enabled:`Activé`,cloudLoginRequired:`Connexion Bambu Cloud requise. Connectez-vous sous Profils → Profils Cloud pour activer la sauvegarde GitHub.`,cloudLoginRequiredShort:`Connexion Cloud requise`,githubDescription:`Synchronisez automatiquement vos profils vers un dépôt GitHub privé pour la sauvegarde et l'historique des versions.`,repoIsPrivate:`Le dépôt est privé — la sauvegarde peut s'y faire en toute sécurité.`,repoIsPublicWarning:`Le dépôt est PUBLIC. Les sauvegardes Bambuddy contiennent les identifiants MQTT, les jetons Home Assistant, les jetons Prometheus, votre adresse Bambu Cloud, et les codes d'accès des imprimantes via les K-profils. L'enregistrement est bloqué tant que le dépôt n'est pas passé en privé dans les paramètres de votre hébergeur.`,repoVisibilityUnknown:`Impossible de déterminer la visibilité du dépôt. Bambuddy refuse toute sauvegarde vers un dépôt non confirmé privé ; l'enregistrement sera bloqué.`,repositoryUrl:`URL du dépôt`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Autoriser HTTP non sécurisé`,allowInsecureHttpHint:`Activer pour les instances auto-hébergées sur des réseaux privés sans TLS`,personalAccessToken:`Jeton d'accès personnel`,tokenSaved:`(enregistré)`,enterNewToken:`Entrez un nouveau jeton pour mettre à jour`,tokenHintGitHub:`Jeton à granularité fine avec accès en lecture et écriture à Contents, ou jeton classique avec la portée repo.`,tokenHintGitLab:`Jeton avec la portée api, ou read_repository et write_repository ensemble.`,tokenHintGitea:`Jeton avec la portée write:repository.`,tokenHintForgejo:`Jeton avec la portée write:repository. Un jeton limité à ce seul dépôt suffit.`,branch:`Branche`,provider:`Fournisseur Git`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Manuel uniquement`,hourly:`Toutes les heures`,daily:`Quotidien`,weekly:`Hebdomadaire`,includeInBackup:`Inclure dans la sauvegarde`,kProfiles:`K-Profils`,kProfilesDescription:`Calibration de l'avance de pression des imprimantes connectées`,noPrintersConnected:`Aucune imprimante connectée`,printersConnected:`{{connected}}/{{total}} connectées`,cloudProfiles:`Profils Cloud`,cloudProfilesDescription:`Préréglages de filament, imprimante et processus depuis Bambu Cloud et Orca Cloud`,cloudProfilesAccounts:`Comptes connectés — Bambu Cloud : {{bambu}}, Orca Cloud : {{orca}}`,appSettings:`Paramètres de l'application`,appSettingsDescription:`Configuration Bambuddy (base de données complète)`,spoolInventory:`Inventaire des bobines`,spoolInventoryDescription:`Bobines de filament, historique d'utilisation et suivi des coûts`,printArchives:`Archives d'impression`,printArchivesDescription:`Métadonnées de l'historique d'impression (pas de fichiers gcode/3MF)`,lastBackupAt:`Dernière sauvegarde :`,noBackupsYet:`Aucune sauvegarde pour l'instant`,next:`Prochaine :`,startingBackup:`Démarrage de la sauvegarde...`,test:`Tester`,enableBackup:`Activer la sauvegarde`,testConnection:`Tester la connexion`,enterRepoUrl:`Entrez l'URL du dépôt`,enterRepoAndToken:`Entrez l'URL du dépôt et le jeton d'accès`,repoRequired:`L'URL du dépôt est requise`,tokenRequired:`Le jeton d'accès est requis`,githubBackupEnabled:`Sauvegarde GitHub activée`,tokenUpdated:`Jeton mis à jour`,settingsSaved:`Paramètres enregistrés`,failedToSave:`Échec de l'enregistrement : {{message}}`,backupCompleteFiles:`Sauvegarde terminée - {{count}} fichiers mis à jour`,backupSkippedNoChanges:`Sauvegarde ignorée - aucun changement`,backupFailed2:`Échec de la sauvegarde : {{message}}`,clearedLogs:`{{count}} journaux supprimés`,failedToClearLogs:`Échec de la suppression des journaux : {{message}}`,restoreFromGit:{button:`Restaurer depuis Git`,title:`Restaurer depuis la sauvegarde Git`,subtitle:`Choisissez un commit et ce qui doit être restauré`,commitLabel:`Commit de sauvegarde`,latestCommit:`Dernière sauvegarde (tête de branche)`,categoriesLabel:`Éléments à restaurer`,inspecting:`Lecture du contenu de la sauvegarde...`,itemCount:`{{count}} dans la sauvegarde`,overwriteLabel:`Écraser les entrées existantes`,overwriteOn:`Les entrées existantes seront mises à jour depuis la sauvegarde.`,overwriteOff:`Seules les entrées manquantes sont ajoutées ; les existantes ne sont pas modifiées.`,selectedCount:`{{count}} sélectionné(s)`,restoring:`Restauration...`,confirmTitle:`Restaurer depuis la sauvegarde ?`,confirmMessage:`Les catégories sélectionnées seront restaurées depuis ce commit. Les entrées manquantes sont ajoutées, les existantes restent inchangées.`,confirmMessageOverwrite:`Les catégories sélectionnées seront restaurées depuis ce commit et les entrées déjà présentes localement seront écrasées. Cette action est irréversible.`,kprofilesOverwriteCaveat:`Les profils K sont l'exception : écrire un emplacement remplace toujours la calibration sur l'imprimante.`,tally:`{{restored}} restaurés, {{skipped}} ignorés, {{failed}} en échec`,reloadHint:`Rechargez Bambuddy pour que les données restaurées apparaissent partout.`,partialHint:`Les catégories listées ci-dessus sont terminées et enregistrées. Celles qui manquent n'ont pas été exécutées.`,failed:`Échec de la restauration.`,loadFailed:`Impossible de lire le dépôt de sauvegarde.`,details:{notPresent:`Absent de ce commit de sauvegarde`,unreadableJson:`JSON illisible : {{paths}}`,settingsNoPayload:`Aucun réglage dans les données`,settingsCredentialsWillSkip:`{{count}} clés ressemblant à des identifiants seront ignorées`,settingsCompanionWillSkip:`{{count}} clés ressemblant à des identifiants seront ignorées, et {{companion}} interrupteurs qui en dépendent resteront désactivés`,settingsCompanionOnlyWillSkip:`{{companion}} interrupteurs resteront désactivés - les identifiants dont chacun a besoin ne peuvent pas être restaurés depuis une sauvegarde`,spoolsUsageCount:`dont {{count}} enregistrements de consommation`,archivesMetadataOnly:`Métadonnées uniquement - les fichiers 3MF et les miniatures ne sont pas dans une sauvegarde Git`,kprofilesPrinterCount:`sur {{count}} imprimantes`},notes:{noData:`Aucune donnée de ce type dans cette sauvegarde`,archivesPrinterMissing:`Certaines archives référençaient des imprimantes qui n'existent plus - lien effacé`,archivesProjectMissing:`Certaines archives référençaient des projets qui n'existent plus - lien effacé`,archivesOwnerCleared:`Certaines archives référençaient des utilisateurs qui n'existent plus - propriétaire effacé, elles ne sont donc visibles que par les utilisateurs disposant de la permission archives:read_all jusqu'à ce qu'un administrateur les réattribue`,archivesOwnerUnmatched:`Certaines archives désignent un propriétaire absent de cette instance - le propriétaire a été effacé plutôt que déduit de l'identifiant utilisateur de la sauvegarde, elles ne sont donc visibles que par les utilisateurs disposant de la permission archives:read_all jusqu'à ce qu'un administrateur les réattribue`,archivesOwnerUnknown:`Certaines archives ont été restaurées sans propriétaire - cette sauvegarde n'en enregistre aucun, elles ne sont donc visibles que par les utilisateurs disposant de la permission archives:read_all jusqu'à ce qu'un administrateur les réattribue`,archivesUndeleted:`Les archives supprimées depuis la sauvegarde sont de nouveau visibles - l'écrasement était activé`,archivesMetadataOnly:`Les archives restaurées ne contiennent que des métadonnées - les fichiers 3MF et les miniatures ne sont pas dans une sauvegarde Git`,spoolUsageUnresolved:`{{count}} enregistrements de consommation ignorés - leur bobine ne figure pas dans la liste des bobines de cette sauvegarde, il n'y a donc rien à quoi les rattacher.`,spoolUsageUnlinked:`{{count}} enregistrements de consommation restaurés sans leur lien vers l'historique d'impression - sélectionnez Archives d'impression en même temps que l'Inventaire des bobines pour le conserver.`,spoolTagKept:`{{count}} étiquettes de bobine laissées telles quelles - la sauvegarde aurait effacé une étiquette scannée depuis, ou l'aurait déplacée sur une seconde bobine.`,settingsCredentialsSkipped:`{{count}} clés ressemblant à des identifiants ignorées - ressaisissez les secrets manuellement`,settingsAuthSkipped:`{{count}} réglages d'authentification ignorés - modifiez-les dans Réglages > Authentification pour que les contrôles de verrouillage s'appliquent`,settingsCompanionSkipped:`{{keys}} laissés désactivés - l'identifiant dont chacun a besoin ne peut pas être restauré depuis une sauvegarde et cette instance n'en a aucun enregistré ; les activer laisserait donc l'intégration sans authentification`,settingsMqttRelayFailed:`Réglages MQTT restaurés, mais le relais n'a pas pu être reconnecté - redémarrez Bambuddy`,kprofilesAlwaysOverwrite:`Les profils K écrasent toujours l'emplacement correspondant sur l'imprimante`,kprofilesAckUnreliable:`Une imprimante qui ne répond pas compte quand même comme restaurée - vérifiez les profils sur l'imprimante`,kprofilesPrinterMissing:`Aucune imprimante avec le numéro de série {{serial}} - ignoré`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) n'est pas connectée - ignoré`,kprofilesUnknownNozzle:`Diamètre de buse inattendu {{nozzle}} pour {{serial}} - envoyé tel quel`,kprofilesUnmatched:`{{count}} profils pour {{nozzle}} n'avaient pas d'équivalent sur {{printer}} - ajoutés comme nouveaux profils`,kprofilesSendFailed:`Impossible d'envoyer les profils {{nozzle}} à {{printer}} ({{serial}})`,kprofilesRefused:`{{printer}} ({{serial}}) a refusé les profils {{nozzle}} : {{reason}}`,kprofilesStepFailed:`L'étape des profils K n'a pas pu être terminée - {{reason}}. Ce qui a été restauré auparavant reste enregistré.`}},history:`Historique`,clear:`Effacer`,date:`Date`,status:`Statut`,trigger:`Type`,triggers:{manual:`Sauvegarde (manuelle)`,scheduled:`Sauvegarde (planifiée)`,restore:`Restauration`},commit:`Commit`,localBackup:`Sauvegarde locale`,localBackupDescription:`Créez une sauvegarde complète de vos données Bambuddy incluant la base de données, les archives, les téléchargements et tous les fichiers.`,downloadBackupLabel:`Télécharger la sauvegarde`,completeBackupZip:`Sauvegarde complète : base de données + tous les fichiers (ZIP)`,download:`Télécharger`,preparingBackup:`Préparation de la sauvegarde...`,creatingArchive:`Création de l'archive de sauvegarde... Cela peut prendre un moment pour les archives volumineuses.`,downloadingFile:`Téléchargement du fichier de sauvegarde...`,backupDownloaded:`Sauvegarde téléchargée avec succès`,failedToCreateBackup:`Échec de la création de la sauvegarde : {{message}}`,restore:`Restaurer`,restoreReplacesAll:`La restauration remplace toutes les données.`,restoreReplacesAllDetail:`Votre base de données et vos fichiers actuels seront complètement remplacés. Un redémarrage est nécessaire après la restauration.`,restoreConfirmTitle:`Restaurer la sauvegarde`,restoreConfirmMessage:`Êtes-vous sûr de vouloir restaurer depuis "{{filename}}" ? Cela remplacera complètement votre base de données et tous vos fichiers. L'application devra être redémarrée après la restauration.`,restoreConfirmButton:`Restaurer la sauvegarde`,uploadingFile:`Téléchargement du fichier de sauvegarde...`,backupRestoredRestart:`Sauvegarde restaurée. Veuillez redémarrer Bambuddy.`,failedToRestore:`Échec de la restauration. Veuillez vérifier le format du fichier.`,reloadNow:`Recharger maintenant`,creatingBackup:`Création de la sauvegarde`,restoringBackup:`Restauration de la sauvegarde`,preparing:`Préparation...`,processing:`Traitement...`,doNotClosePage:`Veuillez ne pas fermer cette page ni naviguer ailleurs. Cette opération peut prendre plusieurs minutes pour les sauvegardes volumineuses.`,restoring:`Restauration...`,restoreComplete:`Restauration terminée`,restoreFailed2:`Échec de la restauration`,importSettings:`Importer les paramètres depuis un fichier de sauvegarde`,pleaseWaitRestoring:`Veuillez patienter pendant la restauration de vos données`,selectBackupFile:`Cliquez pour sélectionner un fichier de sauvegarde (.json ou .zip)`,duplicateHandling:`Comment fonctionne la gestion des doublons :`,matchPrinters:`Imprimantes`,matchPrintersBy:`correspondance par numéro de série`,matchSmartPlugs:`Prises connectées`,matchSmartPlugsBy:`correspondance par adresse IP`,matchNotificationProviders:`Fournisseurs de notifications`,matchNotificationProvidersBy:`correspondance par nom`,matchFilaments:`Filaments`,matchFilamentsBy:`correspondance par nom + type + marque`,matchArchives:`Archives`,matchArchivesBy:`correspondance par hash de contenu (toujours ignoré)`,matchPendingUploads:`Téléchargements en attente`,matchPendingUploadsBy:`correspondance par nom de fichier`,matchSettingsTemplates:`Paramètres et modèles`,matchSettingsTemplatesBy:`toujours écrasés`,replaceExisting:`Remplacer les données existantes`,keepExisting:`Conserver les données existantes`,overwriteDescription:`Écraser les éléments qui existent déjà avec les données de sauvegarde`,keepDescription:`Restaurer uniquement les éléments qui n'existent pas encore`,overwriteCaution:`Attention :`,overwriteWarning:`L'écrasement remplacera vos configurations actuelles par les données de la sauvegarde. Les codes d'accès des imprimantes ne sont jamais écrasés pour des raisons de sécurité.`,cancel:`Annuler`,processingBackup:`Traitement du fichier de sauvegarde...`,itemsRestored:`Éléments restaurés`,itemsSkipped:`Éléments ignorés`,restored:`Restaurés`,skippedAlreadyExist:`Ignorés (existent déjà)`,filesCategory:`Fichiers (3MF, miniatures, etc.)`,andMore:`...et {{count}} de plus`,newApiKeysGenerated:`Nouvelles clés API générées`,keysShownOnce:`Ces clés ne sont affichées qu'une seule fois. Copiez-les maintenant !`,copy:`Copier`,noDataFound:`Aucune donnée à restaurer n'a été trouvée dans le fichier de sauvegarde.`,close:`Fermer`,scheduledBackup:`Sauvegardes planifiées`,scheduledBackupDescription:`Crée automatiquement des instantanés de sauvegarde selon un planning. Le répertoire de sortie peut être monté sur un NAS ou un stockage externe.`,frequency:`Fréquence`,backupTime:`Temps`,retention:`Rétention`,retentionDescription:`Nombre de sauvegardes à conserver`,outputPath:`Chemin de sortie`,outputPathPlaceholder:`Par défaut : {{path}}`,outputPathDescription:`Laisser vide pour l'emplacement par défaut`,runNow:`Exécuter maintenant`,backupFiles:`Fichiers de sauvegarde`,noScheduledBackups:`Aucune sauvegarde`,deleteBackup:`Supprimer`,deleteBackupConfirm:`Supprimer ce fichier de sauvegarde ?`,backupRunning:`Sauvegarde en cours...`,scheduledBackupComplete:`Sauvegarde terminée avec succès`,scheduledBackupFailed:`Échec de la sauvegarde`,nextBackup:`Prochaine sauvegarde`,backupSize:`Taille`,localTimeHint:`Heure locale ({{tz}})`,defaultPathLabel:`Par défaut :`,pathCheck:{title:`Bambuddy ne peut pas écrire dans ce répertoire`,howToFix:`Comment corriger :`,sandboxed:`Le service Bambuddy ne peut pas écrire dans {{path}}. Son unité systemd s'exécute avec ProtectSystem=strict, ce qui rend tout répertoire en dehors des répertoires d'installation, de données et de journaux en lecture seule pour le service - même un répertoire dans lequel vous pouvez écrire depuis votre propre shell.`,read_only:`{{path}} se trouve sur un système de fichiers en lecture seule.`,permission_denied:`Bambuddy n'est pas autorisé à écrire dans {{path}}. Vérifiez le propriétaire et les permissions du répertoire.`,no_space:`Le système de fichiers contenant {{path}} est plein.`,not_a_directory:`{{path}} existe mais n'est pas un répertoire.`,missing:`{{path}} n'existe pas et n'a pas pu être créé.`,error:`Bambuddy ne peut pas écrire dans {{path}}.`,ephemeralTitle:`Ces sauvegardes ne survivront pas à la recréation du conteneur`,container_ephemeral:`{{path}} se trouve dans le conteneur Bambuddy, pas sur l'hôte. Les sauvegardes qui y sont écrites sont perdues à la recréation du conteneur. Montez le répertoire depuis l'hôte :`},categories:{settings:`Paramètres`,notification_providers:`Fournisseurs de notifications`,notification_templates:`Modèles de notifications`,smart_plugs:`Prises connectées`,printers:`Imprimantes`,filaments:`Filaments`,maintenance_types:`Types de maintenance`,archives:`Archives`,projects:`Projets`,pending_uploads:`Téléchargements en attente`,external_links:`Liens externes`,api_keys:`Clés API`}},tags:{title:`Étiquettes`,addTag:`Ajouter Tag`,editTag:`Modifier Tag`,deleteTag:`Supprimer Tag`,tagName:`Nom du Tag`,tagColor:`Couleur du Tag`,noTags:`Aucun tag`,deleteConfirm:`Supprimer ce tag ?`,manageTags:`Gérer les Tags`},uploadModal:{title:`Téléverser des fichiers 3MF`,dragDrop:`Glissez les fichiers .3mf ici`,or:`ou`,browseFiles:`Parcourir`,extractionInfo:`Le modèle d'imprimante est extrait des métadonnées 3MF.`,uploaded:`téléversé`,failed:`échoué`,uploading:`En cours...`,upload:`Téléverser`,uploadFailed:`Échec du téléversement`},editArchive:{title:`Modifier l'archive`,name:`Nom`,namePlaceholder:`Nom de l'impression`,printer:`Imprimante`,noPrinter:`Aucune imprimante`,project:`Projet`,noProject:`Aucun projet`,itemsPrinted:`Nombre de pièces`,itemsPrintedHelp:`Nombre d'objets produits. Indiquez 0 si tout le plateau est raté.`,filamentUsed:`Filament utilisé (g)`,filamentUsedPlaceholder:`p. ex. 46.16`,filamentUsedHelp:`À saisir à la main lorsqu'une impression a été archivée sans son 3MF, afin qu'elle compte quand même dans les totaux de filament. Une nouvelle analyse d'une archive qui possède son 3MF relit la valeur depuis le fichier.`,notes:`Notes`,notesPlaceholder:`Notes sur l'impression...`,externalLink:`Lien externe`,externalLinkPlaceholder:`https://...`,externalLinkHelp:`Lien vers Printables, Thingiverse, etc.`,tags:`Étiquettes`,tagsPlaceholder:`Ajouter des tags...`,addMoreTags:`Plus de tags...`,matchingTags:`Correspondant à "{{query}}"`,existingTags:`Tags existants`,clickToAdd:`(cliquer pour ajouter)`,status:`Statut`,failureReason:`Raison de l'échec`,selectReason:`Choisir raison...`,photos:`Photos du résultat`,photosHelp:`Cliquez sur + pour ajouter des photos`,printResult:`Résultat d'impression`,saving:`Enregistrement...`,failureReasons:{adhesionFailure:`Défaut d'adhésion`,spaghettiDetached:`Spaghetti / Détaché`,layerShift:`Décalage de couche`,cloggedNozzle:`Buse bouchée`,filamentRunout:`Filament fini`,warping:`Warping (Déformation)`,stringing:`Stringing (Cheveux d'ange)`,underExtrusion:`Sous-extrusion`,powerFailure:`Coupure courant`,userCancelled:`Annulé par l'utilisateur`,noStatusUpdate:`Aucune mise à jour d'état reçue`,other:`Autre`},statuses:{completed:`Réussie`,failed:`Échouée`,aborted:`Annulée`,printing:`Impression`}},kProfiles:{title:`Profils K`,noPrintersConfigured:`Aucune imprimante configurée`,addPrinterInSettings:`Ajoutez une imprimante pour gérer les K-profiles`,noActivePrinters:`Aucune imprimante active`,enablePrinterConnection:`Activez la connexion pour voir les K-profiles`,loadingProfiles:`Chargement des K-Profiles...`,printerOffline:`Imprimante hors ligne`,printerOfflineDesc:`L'imprimante doit être allumée.`,noMatchingProfiles:`Aucun profil correspondant`,noMatchingProfilesDesc:`Ajustez votre recherche`,noKProfiles:`Aucun K-Profile`,noKProfilesDesc:`Aucun profil trouvé pour une buse de {{diameter}}mm`,createFirstProfile:`Créer le premier profil`,printer:`Imprimante`,nozzle:`Buse`,refresh:`Rafraîchir`,addProfile:`Ajouter Profil`,export:`Exporter`,import:`Importer`,select:`Choisir`,selectAll:`Tout sélectionner`,delete:`Supprimer`,searchPlaceholder:`Nom ou filament...`,allExtruders:`Tous les extrudeurs`,leftOnly:`Gauche uniquement`,rightOnly:`Droite uniquement`,allFlow:`Tout débit`,hfOnly:`HF uniquement`,sOnly:`S uniquement`,sortName:`Tri : Nom`,sortKValue:`Tri : Valeur K`,sortFilament:`Tri : Filament`,leftExtruder:`Extrudeur gauche`,rightExtruder:`Extrudeur droit`,modal:{addTitle:`Ajouter K-Profile`,editTitle:`Modifier K-Profile`,profileName:`Nom du profil`,profileNamePlaceholder:`ex: Mon profil PLA`,kValue:`Valeur K`,kValuePlaceholder:`0.020`,kValueHelp:`Plage type : 0.01-0.06 (PLA), 0.02-0.10 (PETG)`,filament:`Filament`,selectFilament:`Choisir filament...`,source:{local:`Importé`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Inclus`},noFilamentsHelp:`Aucun filament disponible. Connectez-vous à Bambu Cloud ou importez des préréglages dans Profils → Profils locaux.`,searchFilaments:`Rechercher des filaments...`,noFilamentMatches:`Aucun filament ne correspond à cette recherche`,flowType:`Type de débit`,highFlow:`Haut Débit (HF)`,standard:`Standard`,nozzleSize:`Taille buse`,extruder:`Extrudeur`,extruders:`Extrudeurs`,left:`Gauche`,right:`Droite`,notes:`Notes (locales)`,notesPlaceholder:`Notes sur ce profil...`,notesHelp:`Enregistré dans Bambuddy, pas sur l'imprimante`,syncing:`Sync avec l'imprimante...`,savingExtruder:`Sauvegarde extrudeur {{current}}/{{total}}...`,pleaseWait:`Patientez...`},deleteConfirm:{title:`Supprimer profil`,cannotUndo:`Action irréversible`,message:`Supprimer "{{name}}" de l'imprimante ?`},bulkDelete:{title:`Supprimer les profils`,cannotUndo:`Action irréversible`,message:`Supprimer les {{count}} profils de l'imprimante ?`},toast:{profileSaved:`Profil K enregistré`,profilesSaved:`Profil K enregistré sur {{count}} extrudeur(s)`,selectAtLeastOneExtruder:`Sélectionnez un extrudeur`,selectFilament:`Sélectionnez d’abord un filament`,filamentNotResolvable:`Aucun identifiant de filament Bambu pour {{name}} — l’imprimante ne peut pas enregistrer de profil`,profileDeleted:`Profil K supprimé`,profilesDeleted:`{{count}} profils supprimés`,exportedProfiles:`{{count}} profils exportés`,importedProfiles:`{{count}} sur {{total}} profils importés`,noProfilesToExport:`Rien à exporter`,invalidFileFormat:`Format invalide`,failedToParseImport:`Échec analyse fichier`,failedToSaveBatch:`Échec enregistrement groupé`,noteSaved:`Note enregistrée`,failedToSaveNote:`Échec note`},permission:{noRead:`Pas d'autorisation lecture`,noCreate:`Pas d'autorisation création`,noUpdate:`Pas d'autorisation mise à jour`,noDelete:`Pas d'autorisation suppression`,noExport:`Pas d'autorisation export`,noImport:`Pas d'autorisation import`}},virtualPrinter:{title:`Imprimante Virtuelle`,running:`En cours`,stopped:`Arrêtée`,description:{default:`Active une imprimante qui apparaît dans Bambu Studio. Les fichiers envoyés sont archivés sans impression.`,proxy:`Active un proxy qui relaie le trafic vers une imprimante réelle, permettant l'impression à distance.`},enable:{title:`Activer l'imprimante virtuelle`,visibleInSlicer:`Visible comme "Bambuddy" dans le Slicer`,proxyingTo:`Proxy vers {{name}}`,notActive:`Inactive`},model:{title:`Modèle d'imprimante`,description:`Choisissez le modèle à émuler.`,restartWarning:`Changer le modèle redémarrera le service`},accessCode:{title:`Code d'accès`,isSet:`Code défini`,notSet:`Code requis pour activer`,placeholder:`Code 8 char`,placeholderChange:`Entrez nouveau code`,hint:`Exactement 8 caractères. Sert à l'auth du Slicer.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Hérité de l'imprimante cible`,derivedFromTargetHint:`Utilise le code d'accès de l'imprimante cible. Le pont transmet l'authentification du slicer à l'imprimante réelle, donc les codes doivent correspondre — modifiez le code dans les paramètres de l'imprimante.`,reveal:`Afficher le code d'accès`,hide:`Masquer le code d'accès`},targetPrinter:{title:`Imprimante cible`,configured:`Cible configurée`,notConfigured:`Imprimante requise pour mode Proxy`,placeholder:`Choisir imprimante...`,hint:`L'imprimante doit être en mode LAN.`,noPrinters:`Ajoutez une imprimante réelle d'abord.`},remoteInterface:{title:`Exception Interface Réseau`,configured:`Override actif`,optional:`Optionnel - si IP auto est fausse (VPN, Docker, multi-NIC).`,placeholder:`Auto (défaut)...`,hint:`Force l'IP annoncée via SSDP.`},mode:{title:`Mode`,archive:`Archiver`,archiveDesc:`Archive immédiatement`,review:`Revue`,reviewDesc:`Attendre revue avant archive`,queue:`File`,queueDesc:`Archiver et ajouter à la file`,proxy:`Proxy`,proxyDesc:`Relais vers imprimante réelle`},autoDispatch:{title:`Lancement automatique`,description:`Lancer automatiquement les impressions ajoutées à la file. Désactivé, les impressions attendent un lancement manuel.`},queueForceColorMatch:{title:`Forcer la correspondance des couleurs`,description:`Refuser l'envoi vers une imprimante qui n'a pas exactement le type de filament et la couleur chargés. Désactivé par défaut — sans cela, la file d'attente utilise uniquement la correspondance par modèle et peut choisir une imprimante avec la mauvaise couleur.`},saveAmsMapping:{title:`Enregistrer le mappage AMS`,description:`Conserve dans l'archive le choix d'emplacement AMS propre au slicer (depuis la commande MQTT project_file), afin qu'une réimpression ultérieure réutilise la même bobine physique au lieu de la redéduire à partir du type/de la couleur du fichier. Désactivé par défaut.`},gcodeInjection:{title:`Injection G-code`,description:`Applique les extraits de G-code configurés par modèle dans les Paramètres aux travaux de ce VP. Désactivé par défaut.`},tailscaleDisabled:{title:`Intégration Tailscale`,description:`Activez pour marquer ce VP comme exposé via Tailscale. Affiche l'adresse Tailscale de l'hôte pour que vous sachiez quelle IP coller dans le slicer. L'étape d'import CA est inchangée — cette bascule n'a aucun effet sur les certificats.`},setupRequired:{title:`Configuration requise`,description:`Nécessite des réglages système (ports, pare-feu).`,readGuide:`Lire le guide de configuration`},howItWorks:{title:`Fonctionnement`,step1:`Sur le même LAN, les imprimantes virtuelles apparaissent automatiquement dans votre slicer (Bambu Studio / OrcaSlicer). Depuis d'autres réseaux, ajoutez-les manuellement par adresse IP et code d'accès.`,step2:`En mode Archive, Revue et File d'attente, utilisez le bouton "Envoyer" dans votre slicer pour envoyer des fichiers 3MF à Bambuddy. Le slicer affichera "Impression réussie" — le fichier est stocké, pas imprimé.`,step3:`En mode Proxy, l'imprimante virtuelle relaie tout le trafic vers une vraie imprimante — les impressions démarrent immédiatement comme en connexion directe.`},status:{title:`Détails du statut`,printerName:`Nom`,model:`Modèle`,serialNumber:`Série`,mode:`Mode`,pendingFiles:`Fichiers en attente`,targetPrinter:`Cible`,ftpPort:`Port FTP`,mqttPort:`Port MQTT`,ftpConnections:`Connexions FTP`,mqttConnections:`Connexions MQTT`},toast:{updated:`Réglages virtuels mis à jour`,failedToUpdate:`Échec mise à jour`,copyFailed:`Échec de la copie — veuillez sélectionner le texte manuellement`,accessCodeRequired:`Code d'accès requis`,targetPrinterRequired:`Imprimante cible requise`,bindIpRequired:`Veuillez d'abord définir une adresse IP`,accessCodeEmpty:`Le code ne peut pas être vide`,accessCodeLength:`Le code doit faire 8 caractères`,targetCodeChangedRebind:`Le code d'accès correspond désormais à la nouvelle imprimante cible. Réajoutez cet appareil dans votre slicer pour récupérer le nouveau code.`,created:`Imprimante virtuelle créée`,failedToCreate:`Échec de la création de l'imprimante virtuelle`,deleted:`Imprimante virtuelle supprimée`,failedToDelete:`Échec de la suppression de l'imprimante virtuelle`},list:{title:`Imprimantes virtuelles`,add:`Ajouter`,addFirst:`Ajouter une imprimante virtuelle`,empty:`Aucune imprimante virtuelle configurée. Ajoutez-en une pour commencer.`},bindIp:{title:`Interface réseau`,placeholder:`Sélectionner interface...`,hint:`Interface réseau sur laquelle cette imprimante virtuelle écoute. Doit être unique par imprimante.`},proxy:{accessCodeHint:`En mode proxy, utilisez le code d'accès de l'imprimante cible dans le slicer. La connexion est transmise de manière transparente à l'imprimante réelle.`},addDialog:{title:`Ajouter une imprimante virtuelle`,name:`Nom`,hint:`Vous pourrez configurer le code d'accès, l'imprimante cible et d'autres paramètres après la création.`,create:`Créer`},deleteConfirm:{title:`Supprimer l'imprimante virtuelle`,message:`Êtes-vous sûr de vouloir supprimer "{{name}}" ? Cela arrêtera tous les services de cette imprimante.`},archiveNameSource:{title:`Source du nom d'archive`,description:`Choisissez comment les nouvelles archives sont nommées lorsque les fichiers arrivent via l'imprimante virtuelle. "Métadonnées" utilise le titre intégré par le slicer dans le 3MF (par défaut). "Nom de fichier" utilise le nom envoyé par Bambu Studio en FTP. Note : Bambu Studio écrase le nom que vous saisissez dans la boîte "envoyer à l'imprimante" avec le champ Titre du 3MF lorsque celui-ci est présent, les deux modes produisent donc souvent la même chaîne.`,metadata:`Métadonnées`,filename:`Nom de fichier`},caCert:{title:`Certificat du slicer`,description:`Les imprimantes virtuelles utilisent un certificat TLS signé par l'autorité de certification Bambuddy. Importez ce certificat CA dans le magasin de confiance de votre slicer une seule fois pour qu'il accepte la connexion — plus besoin de le copier depuis la ligne de commande.`,copy:`Copier`,copied:`Copié`,download:`Télécharger`,fingerprint:`SHA-256`}},modelViewer:{openInSlicer:`Ouvrir dans le Slicer`,openInSlicerWith:`Ouvrir dans {{slicer}}`,moreSlicerOptions:`Plus d'options de slicer`,openInSlicerFailed:`Impossible d'ouvrir dans le slicer`,tabs:{model:`Modèle 3D`},notAvailable:`indisponible`,plates:`Plateaux`,allPlates:`Tous les plateaux`,plateNumber:`Plateau {{number}}`,plateCount:`{{count}} plateau`,plateCount_other:`{{count}} plateaux`,objectCount:`{{count}} objet`,objectCount_other:`{{count}} objets`,filamentCount:`{{count}} filament`,filamentCount_other:`{{count}} filaments`,eta:`Fin {{minutes}} min`,noPreview:`Aucun aperçu pour ce fichier`,pagination:{pageOf:`Page {{current}} sur {{total}}`,prev:`Préc`,next:`Suiv`},errors:{failedToLoad:`Échec chargement fichier`,noMeshes:`Aucun maillage trouvé dans le 3MF`,unsupportedFormat:`Format non supporté`}},maintenanceDescriptions:{lubricateCarbonRods:`Appliquer du lubrifiant sur les tiges carbone pour un mouvement fluide`,lubricateRails:`Appliquer du lubrifiant sur les rails linéaires`,cleanNozzle:`Nettoyer buse et hotend anti-bouchage`,checkBelts:`Tension des courroies pour la précision`,cleanBuildPlate:`Nettoyage plateau pour l'adhésion`,checkExtruder:`Usure des engrenages de l'extrudeur`,checkCooling:`Bon fonctionnement des ventilateurs`,generalInspection:`Inspection générale de la machine`,cleanCarbonRods:`Nettoyer les tiges carbone (friction)`,lubricateSteelRods:`Appliquer du lubrifiant sur les tiges en acier pour un mouvement fluide`,cleanSteelRods:`Nettoyer les tiges en acier (friction)`,cleanLinearRails:`Essuyer les rails linéaires (poussière/débris)`,checkPtfeTube:`Usure ou dommage du tube PTFE`,replaceHepaFilter:`Filtre HEPA pour la qualité de l'air`,replaceCarbonFilter:`Filtre charbon actif (odeurs)`,lubricateLeftNozzleRail:`Lubrifier le rail de buse gauche (Série H2)`},haSensors:{label:`Capteurs`,unavailable:`Indisponible`,blocksPrints:`{{entity}} — retient les impressions tant que l'alerte est active`,states:{open:`Ouvert`,closed:`Fermé`,unlocked:`Déverrouillé`,locked:`Verrouillé`,detected:`Détecté`,clear:`Dégagé`,wet:`Humide`,dry:`Sec`,problem:`Problème`,ok:`OK`,running:`En marche`,stopped:`Arrêté`,on:`Activé`,off:`Désactivé`},sectionTitle:`Capteurs Home Assistant (imprimantes)`,add:`Ajouter un capteur`,addTitle:`Ajouter un capteur Home Assistant`,editTitle:`Modifier le capteur Home Assistant`,empty:`Aucun capteur pour l'instant. Liez un contact de porte ou un thermomètre depuis Home Assistant pour l'afficher sur la carte imprimante.`,unknownPrinter:`Imprimante inconnue`,badgeBlocks:`Retient les impressions`,badgeNotifies:`Notifie`,badgeHidden:`Masqué sur la carte`,printer:`Imprimante`,entity:`Entité`,searchPlaceholder:`Rechercher des entités...`,noEntities:`Aucune entité correspondante`,name:`Nom affiché`,alertWhen:`Alerter quand`,alertNever:`Jamais — affichage seul`,alertAbove:`Au-dessus de`,alertBelow:`En dessous de`,alertHint:`L'état d'alerte met le capteur en évidence sur la carte imprimante et active les options ci-dessous.`,showOnCard:`Afficher sur la carte imprimante`,notifyOnAlert:`Envoyer une notification au déclenchement de l'alerte`,blockPrint:`Retenir les impressions en file tant que l'alerte est active`,blockPrintHint:`Les travaux restent en file et démarrent d'eux-mêmes une fois le capteur revenu à la normale. Ignoré tant que Home Assistant est injoignable.`,toast:{created:`Capteur ajouté`,updated:`Capteur enregistré`,deleted:`Capteur supprimé`},error:{pickEntity:`Choisissez une entité Home Assistant`,nameRequired:`Saisissez un nom affiché`,printerRequired:`Choisissez une imprimante`,alertRequired:`Définissez d'abord une condition d'alerte`}},locationHaSensors:{sectionTitle:`Capteurs Home Assistant (emplacements de stockage)`,sectionDescription:`Associez des capteurs de température, d'humidité ou de batterie Home Assistant à vos emplacements de stockage pour afficher les relevés en direct sur la fiche du filament et dans le tableau. Un seul capteur par catégorie est autorisé par emplacement.`,add:`Ajouter un capteur`,addTitle:`Ajouter un capteur Home Assistant`,editTitle:`Modifier le capteur Home Assistant`,empty:`Aucun capteur pour l'instant. Liez un capteur de température ou d'humidité depuis Home Assistant pour l'afficher sur la carte filament.`,unknownLocation:`Emplacement inconnu`,location:`Emplacement de stockage`,showOnCard:`Afficher sur la carte filament`,overwriteConfirm:{title:`Remplacer le capteur existant\xA0?`,messageTemperature:`« {{location}} » a déjà un capteur de température lié : {{name}}. Continuer le remplacera.`,messageHumidity:`« {{location}} » a déjà un capteur d'humidité lié : {{name}}. Continuer le remplacera.`,messageBattery:`« {{location}} » a déjà un capteur de batterie lié : {{name}}. Continuer le remplacera.`},autoAdd:{confirmTitle:`Ajouter aussi les autres capteurs ?`,confirmMessage:`Bambuddy a également trouvé d'autres capteurs pour cet emplacement. Choisissez ceux à ajouter aussi.`,added:`Également ajouté : {{names}}`,noneFound:`Aucun capteur de température, d'humidité ou de batterie correspondant trouvé pour cet emplacement.`,onlyThisOne:`Seulement celui-ci`},options:{buttonLabel:`Options des capteurs`,title:`Options des capteurs d'emplacement`,description:`Ces valeurs sont utilisées lorsqu'un capteur de température, d'humidité ou de batterie est lié automatiquement avec le premier capteur d'un emplacement.`,generalSettings:`Paramètres généraux`,pollInterval:`Intervalle de mise à jour (secondes)`,pollIntervalHint:`Fréquence à laquelle Bambuddy interroge Home Assistant et actualise les valeurs des capteurs à l'écran. Minimum 60 secondes.`,colorizeValues:`Colorer les valeurs des capteurs selon leurs seuils d'alerte`,aboveColor:`Couleur au-dessus du seuil`,belowColor:`Couleur en dessous du seuil`,optimalColor:`Couleur pour la valeur optimale`,colors:{red:`Rouge`,orange:`Orange`,yellow:`Jaune`,green:`Vert`,blue:`Bleu`,purple:`Violet`,pink:`Rose`},saved:`Options enregistrées`,saveFailed:`Échec de l'enregistrement des options`,reset:`Réinitialiser`,resetConfirm:{title:`Réinitialiser tous les capteurs d'emplacement existants ?`,message:`Cela écrase les seuils d'alerte, les notifications et la visibilité sur la carte de tous les capteurs de température, d'humidité et de batterie d'emplacement existants avec les valeurs configurées ci-dessus, et restaure le nom de chaque capteur avec son nom convivial Home Assistant — les capteurs d'imprimante ne sont pas concernés. Cette action est irréversible. Selon le nombre de capteurs, cela peut prendre un moment.`},resetDone:`Appliqué à {{count}} capteurs d'emplacement`,resetFailed:`Échec de la réinitialisation des capteurs d'emplacement`},deleteAllConfirm:{title:`Supprimer tous les capteurs ?`,message:`Cela supprime les {{count}} capteurs liés à « {{location}} ». Cette action est irréversible.`},currentlyBound:`Actuellement lié : {{entity}}`,error:{locationRequired:`Choisissez un emplacement de stockage`},toast:{created:`Capteur ajouté`,updated:`Capteur enregistré`,deleted:`Capteur supprimé`}},smartPlugs:{offline:`Hors ligne`,admin:`Administrateur`,openPlugAdminPage:`Page admin de la prise`,deleteSmartPlug:`Supprimer la prise`,turnOnSmartPlug:`Allumer la prise`,turnOffSmartPlug:`Éteindre la prise`,turnOn:`Allumer`,turnOff:`Éteindre`,addSmartPlug:{scanningNetwork:`Scan réseau...`,chooseEntity:`Choisir une entité...`,connectionFailed:`Échec connexion`,searchEntities:`Chercher entités...`,searchPowerSensors:`Capteurs puissance...`,searchEnergySensors:`Capteurs énergie...`,placeholders:{plugName:`Prise Salon`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Identique au topic puissance, ou différent`}},linkedTo:`Lié à :`,monitorOnly:`Surveillance uniquement`,alerts:`Alertes`,scheduleOn:`À {{time}}`,scheduleOff:`Désactivé {{time}}`,on:`On`,off:`Désactivé`,power:`Puissance`,kwhToday:`kWh Aujourd'hui`,settings:`Paramètres`,automationSettings:`Paramètres d'automatisation`,showInSwitchbar:`Afficher dans la barre de commutateurs`,quickAccessSidebar:`Accès rapide depuis la barre latérale`,enabled:`Activé`,enableAutomation:`Activer l'automatisation pour cette prise`,autoOn:`Auto Activé`,autoOnDescription:`Allumer au démarrage de l'impression`,autoOff:`Auto Désactivé`,autoOffDescription:`Éteindre à la fin de l'impression (unique)`,autoOffPersistent:`Garder activé`,autoOffPersistentDescription:`Rester activé entre les impressions au lieu d'une seule fois`,controlsPrinterPower:`Alimente l'imprimante`,controlsPrinterPowerDescription:`Désactivez si cette prise n'alimente qu'un accessoire (ventilateur de filtre, éclairage). Sinon, l'éteindre marque l'imprimante hors ligne.`,autoOffAfterDrying:`Arrêt auto après séchage`,autoOffAfterDryingDescription:`Éteindre à la fin du séchage de l'AMS`,delayAfterDryingMinutes:`Délai après séchage (minutes)`,turnOffDelayMode:`Mode de délai d'extinction`,time:`Temps`,temp:`Temp.`,delayMinutes:`Délai (minutes)`,tempThreshold:`Seuil de température (°C)`,tempThresholdDescription:`S'éteint lorsque la buse refroidit en dessous de cette température`,edit:`Modifier`,deleteConfirm:`Êtes-vous sûr de vouloir supprimer "{{name}}" ? Cette action est irréversible.`,turnOnConfirm:`Êtes-vous sûr de vouloir allumer "{{name}}" ?`,turnOffConfirm:`Êtes-vous sûr de vouloir éteindre "{{name}}" ? Cela coupera l'alimentation de l'appareil connecté.`,failedToTurn:`Impossible de {{action}} "{{name}}"`,unknown:`Inconnu`,addTitle:`Ajouter une prise connectée`,editTitle:`Modifier la prise connectée`,stopScanning:`Arrêter le scan`,discoverTasmota:`Découvrir les appareils Tasmota`,foundDevices:`{{count}} appareil(s) trouvé(s) - cliquez pour sélectionner :`,noDevicesFound:`Aucun appareil Tasmota trouvé sur votre réseau`,haNotConfigured:`Home Assistant n'est pas configuré. Configurez-le dans`,haSettingsPath:`Paramètres → Réseau → Home Assistant`,selectEntity:`Sélectionner l'entité *`,ipAddress:`Adresse IP *`,nameLabel:`Nom *`,username:`Nom d'utilisateur`,password:`Mot de passe`,authHint:`Laissez vide si votre appareil Tasmota ne nécessite pas d'authentification`,linkToPrinter:`Lier à l'imprimante`,noPrinter:`Pas d'imprimante (contrôle manuel uniquement)`,linkingDescription:`La liaison permet l'allumage/extinction automatique au début/fin de l'impression`,powerAlerts:`Alertes de puissance`,alertAbove:`Alerte si au-dessus (W)`,alertBelow:`Alerte si en dessous (W)`,alertDescription:`Recevoir une notification lorsque la consommation dépasse ces seuils. Laisser vide pour désactiver cette direction.`,dailySchedule:`Planification quotidienne`,turnOnAt:`Allumer à`,turnOffAt:`Éteindre à`,scheduleDescription:`Allumer/éteindre automatiquement la prise à ces heures chaque jour. Laisser vide pour ignorer cette action.`,showOnPrinterCard:`Afficher sur la carte imprimante`,displayOnPrinterCard:`Afficher le bouton sur la carte imprimante`,connectedResult:`Connecté !`,deviceLabel:`Appareil : {{name}} - `,stateLabel:`État : {{state}}`,test:`Tester`,delete:`Supprimer`,save:`Enregistrer`,add:`Ajouter`,cancel:`Annuler`,failedToStartScan:`Impossible de démarrer le scan`,nameRequired:`Le nom est requis`,entityRequired:`L'entité est requise pour les prises Home Assistant`,mqttTopicRequired:`Au moins un topic MQTT doit être configuré pour la puissance, l'énergie ou la surveillance d'état`,loadingEntities:`Chargement des entités...`,loading:`Chargement...`,failedToLoadEntities:`Échec du chargement des entités : {{error}}`,noEntitiesMatching:`Aucune entité trouvée correspondant à "{{search}}"`,noEntitiesAvailable:`Aucune entité disponible`,searchingEntities:`Recherche de toutes les entités ({{count}} trouvées)`,showingEntities:`Affichage switch, light, input_boolean ({{count}} disponibles)`,energyMonitoringOptional:`Surveillance énergétique (Optionnel)`,energyMonitoringHint:`Recherchez et sélectionnez les capteurs fournissant des données de puissance/énergie.`,powerSensorW:`Capteur de puissance (W)`,energyTodayKwh:`Énergie aujourd'hui (kWh)`,totalEnergyKwh:`Énergie totale (kWh)`,noMatchingSensors:`Aucun capteur correspondant`,none:`Aucun`,mqttNotConfigured:`Broker MQTT non configuré. Définissez l'adresse du broker dans`,mqttSettingsPath:`Paramètres → Réseau → Publication MQTT`,mqttNotConfiguredSuffix:`(vous n'avez pas besoin d'activer la publication, remplissez simplement les détails du broker).`,mqttMonitorOnlyDescription:`Les prises MQTT reçoivent les données de puissance/énergie via un abonnement MQTT. Le contrôle on/off n'est pas disponible - utilisez votre broker MQTT ou système domotique.`,powerMonitoring:`Surveillance de puissance`,energyMonitoring:`Surveillance énergétique`,stateMonitoring:`Surveillance d'état`,optional:`optionnel`,topic:`Sujet`,jsonPath:`Chemin JSON`,multiplier:`Multiplicateur`,onValue:`Valeur ON`,mqttPowerHint:`Le chemin JSON extrait la valeur du payload JSON (ex: "power_l1"). Laisser vide si le topic publie des valeurs numériques brutes.
 Utiliser le multiplicateur 0.001 pour mW→W, 1000 pour kW→W.`,mqttEnergyHint:`Le chemin JSON extrait la valeur du payload JSON. Laisser vide pour les valeurs brutes.
 Utiliser le multiplicateur 0.001 pour Wh→kWh, 1000 pour MWh→kWh.`,mqttStateHint:`Le chemin JSON extrait la valeur du payload JSON. Laisser vide pour les valeurs brutes.
-Valeur ON : la chaîne exacte signifiant "ON". Laisser vide pour la détection auto (ON, true, 1).`,restControl:`Contrôle`,restOnUrl:`URL d'activation`,restOffUrl:`URL de désactivation`,restOnBody:`Corps de requête ON`,restOffBody:`Corps de requête OFF`,restMethod:`Méthode HTTP`,restHeaders:`Custom Headers (JSON)`,restStatusUrl:`URL de statut`,restStatusPath:`Chemin JSON état`,restStatusOnValue:`Valeur ON`,restPowerUrl:`URL de puissance`,restPowerPath:`Chemin JSON puissance`,restPowerMultiplier:`Multiplicateur de puissance`,restEnergyUrl:`URL d'énergie`,restEnergyPath:`Chemin JSON de l'énergie (aujourd'hui)`,restEnergyTotalPath:`Chemin JSON de l'énergie (compteur total)`,restEnergyTotalMultiplier:`Multiplicateur du compteur total`,restEnergyTotalPathHint:`ex. aenergy.total`,restEnergyTotalHint:`Beaucoup de prises — tous les Shelly notamment — ne fournissent qu'un compteur cumulé qui ne se remet jamais à zéro. Il va ici, pas dans le champ ci-dessus : lu comme la consommation du jour, il ne repartirait jamais de zéro à minuit, et Hier et Total resteraient vides. Bambuddy en déduit Aujourd'hui et Hier, ce qui demande un à deux jours de relevés. Un Shelly renvoie des wattheures : utilisez un multiplicateur de 0.001.`,restEnergyMultiplier:`Multiplicateur d'énergie`,restUrlRequired:`Au moins une URL (ON ou OFF) est requise pour les prises REST`,restHeadersHint:`par ex. {"Authorization": "Bearer your-token"}`,restBodyHint:`par ex. ON, {"state": "on"}`,restStatusHint:`URL pour interroger l'état actuel`,restPathHint:`par ex. state ou data.power.status`,restPowerUrlHint:`URL séparée pour les données de puissance (utilise l'URL de statut si vide)`,restEnergyUrlHint:`URL séparée pour les données d'énergie (utilise l'URL de statut si vide)`,restEnergyHint:`Chaque valeur peut utiliser sa propre URL ou se rabattre sur l'URL de statut. Utilisez les multiplicateurs pour la conversion d'unités (ex : 0.001 pour convertir Wh en kWh).`,testConnection:`Tester la connexion`,connectionSuccess:`Connexion réussie`,noSwitchesInSwitchbar:`Aucun commutateur dans la barre`,enableSwitchbarHint:`Activez "Afficher dans la barre de commutateurs" dans Paramètres > Smart Plugs`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`E-mail`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`Notifications par e-mail SMTP`,telegram:`Notifications via un bot Telegram`,discord:`Envoyer vers un canal Discord via webhook`,ntfy:`Notifications push gratuites, auto-hébergeables`,pushover:`Notifications push simples et fiables`,callmebot:`Notifications WhatsApp gratuites via CallMeBot`,webhook:`POST HTTP générique vers n'importe quelle URL`,homeassistant:`Notifications persistantes dans le tableau de bord Home Assistant`,bark:`Notifications push iOS via Bark (auto-hébergeable)`},lastSuccess:`Dernier : {{date}}`,error:`Erreur`,printer:`Imprimante :`,allPrinters:`Toutes les imprimantes`,sendTestNotification:`Envoyer une notification de test`,eventSettings:`Paramètres des événements`,enabled:`Activé`,sendFromProvider:`Envoyer des notifications depuis ce fournisseur`,printEvents:`Événements d'impression`,printerStatus:`État de l'imprimante`,amsAlarms:`Alarmes AMS`,amsHtAlarms:`Alarmes AMS-HT`,printQueue:`File d'attente d'impression`,start:`Début`,plateCheck:`Vérification du plateau`,complete:`Terminé`,failed:`Échoué`,stopped:`Arrêté`,progress:`Progression`,offline:`Hors ligne`,lowFilament:`Filament bas`,maintenance:`Maintenance`,amsHumidity:`Humidité AMS`,amsTemp:`Temp. AMS`,amsDryingSuspended:`Séchage suspendu`,amsHtHumidity:`Humidité AMS-HT`,amsHtTemp:`Temp. AMS-HT`,bedCooled:`Plateau refroidi`,firstLayer:`Première couche`,quiet:`Silencieux`,digest:`Résumé {{time}}`,printStarted:`Impression démarrée`,plateNotEmpty:`Plateau non vide`,plateNotEmptyDescription:`Objets détectés avant l'impression`,plateClearRequired:`Plateau à libérer`,plateClearRequiredDescription:`Impression terminée, la file attend la confirmation`,plateClear:`Plateau libre`,printCompleted:`Impression terminée`,bedCooledLabel:`Plateau refroidi`,bedCooledDescription:`Plateau refroidi sous le seuil après l'impression`,firstLayerCompleteLabel:`Première couche terminée`,firstLayerCompleteDescription:`Notification avec photo après la première couche`,missingSpoolAssignmentLabel:`Affectation de bobine manquante`,billingChargeFailedLabel:`Échec de facturation`,billingChargeFailedDescription:`Notifier lorsque les coûts d'impression ne peuvent pas être enregistrés`,missingSpoolAssignmentDescription:`Notifier quand une impression démarre et que des bacs requis n'ont pas de bobine assignée`,printFailed:`Impression échouée`,printStopped:`Impression arrêtée`,progressMilestones:`Jalons de progression`,progressMilestonesDescription:`Notifier à 25 %, 50 %, 75 %`,printerOffline:`Imprimante hors ligne`,printerError:`Erreur de l'imprimante`,aiFailureDetection:`Détection de défaillance par IA`,aiFailureDetectionDescription:`Notifier lorsque l'IA Obico détecte une défaillance d'impression possible`,lowFilamentLabel:`Filament bas`,maintenanceDue:`Maintenance requise`,maintenanceDueDescription:`Notifier lorsqu'une maintenance est nécessaire`,amsHumidityHigh:`Humidité AMS élevée`,amsHumidityHighDescription:`L'humidité de l'AMS standard dépasse le seuil`,amsTemperatureHigh:`Température AMS élevée`,amsTemperatureHighDescription:`La température de l'AMS standard dépasse le seuil`,amsDryingSuspendedTitle:`Séchage automatique suspendu`,amsDryingSuspendedDescription:`Le séchage automatique a abandonné une unité AMS car l'humidité n'est jamais descendue sous le seuil`,amsHtHumidityHigh:`Humidité AMS-HT élevée`,amsHtHumidityHighDescription:`L'humidité de l'AMS-HT dépasse le seuil`,amsHtTemperatureHigh:`Température AMS-HT élevée`,amsHtTemperatureHighDescription:`La température de l'AMS-HT dépasse le seuil`,inventoryAlerts:`Alertes de stock`,stockReorderAlert:`Alerte de réapprovisionnement`,stockReorderAlertDescription:`Le SKU a atteint son point de réapprovisionnement`,stockBreakAlert:`Alerte de rupture de stock`,stockBreakAlertDescription:`Le stock sera épuisé avant l'arrivée du réapprovisionnement`,jobAdded:`Tâche ajoutée`,jobAddedDescription:`Tâche ajoutée à la file d'attente`,jobAssigned:`Tâche assignée`,jobAssignedDescription:`Tâche basée sur le modèle assignée à l'imprimante`,jobStarted:`Tâche démarrée`,jobStartedDescription:`La tâche de la file a commencé l'impression`,jobWaiting:`Tâche en attente`,jobWaitingDescription:`Tâche en attente de filament ou imprimante`,jobSkipped:`Tâche ignorée`,jobSkippedDescription:`Tâche ignorée (échec précédent)`,jobFailed:`Tâche échouée`,jobFailedDescription:`La tâche n'a pas pu démarrer`,queueComplete:`File d'attente terminée`,queueCompleteDescription:`Toutes les tâches de la file sont terminées`,quietHours:`Heures silencieuses`,noNotificationsDuring:`Aucune notification pendant ces heures`,editProviderToChangeQuietHours:`Modifier le fournisseur pour changer les heures silencieuses`,dailyDigest:`Résumé quotidien`,batchNotifications:`Regrouper les notifications en un seul résumé quotidien`,sendAt:`Envoyer à {{time}}`,editProviderToChangeDigestTime:`Modifier le fournisseur pour changer l'heure du résumé`,edit:`Modifier`,deleteProvider:`Supprimer le fournisseur de notifications`,deleteConfirm:`Êtes-vous sûr de vouloir supprimer « {{name}} » ? Cette action est irréversible.`,delete:`Supprimer`,addTitle:`Ajouter un fournisseur de notifications`,editTitle:`Modifier le fournisseur de notifications`,nameLabel:`Nom *`,namePlaceholder:`Mes notifications`,providerTypeLabel:`Type de fournisseur *`,configuration:`Configuration`,testConfiguration:`Tester la configuration`,printerFilter:`Filtre d'imprimante`,onlyFromPrinter:`Envoyer uniquement les notifications pour les événements de cette imprimante`,quietHoursDnd:`Heures silencieuses (Ne pas déranger)`,quietStart:`Début`,quietEnd:`Fin`,dailyDigestLabel:`Résumé quotidien`,sendDigestAt:`Envoyer le résumé à`,digestCollected:`Les événements seront collectés et envoyés en un seul résumé à cette heure`,notificationEvents:`Événements de notification`,progressPercent:`(25 %, 50 %, 75 %)`,bedCooledAfterPrint:`(après la fin de l'impression)`,haSensorAlert:`Alerte de capteur d'imprimante`,haSensorAlertDescription:`(un capteur Home Assistant lié nécessite votre attention)`,locationHaSensorAlert:`Alerte de capteur d'emplacement`,locationHaSensorAlertDescription:`(un capteur Home Assistant lié à un emplacement de stockage nécessite votre attention)`,eventPriority:{sectionTitle:`Priorité ntfy`,helpNtfy:`Choisissez une priorité pour chaque événement activé. ntfy l'utilise pour faire remonter les alertes (son, visibilité, comportement push). Les niveaux non définis ici utilisent la valeur par défaut du serveur ntfy.`,min:`Min.`,low:`Basse`,default:`Par défaut`,high:`Haute`,urgent:`Urgente`},cancel:`Annuler`,save:`Enregistrer`,add:`Ajouter`,nameRequired:`Le nom est requis`,fieldRequired:`{{field}} est requis`,haDataInvalid:`Le champ Data doit être un objet JSON valide, p. ex. {"priority": "high", "ttl": 0}`,phoneNumber:`Numéro de téléphone`,apiKey:`Clé API`,serverUrl:`URL du serveur`,topic:`Sujet`,authToken:`Jeton d'authentification`,userKey:`Clé utilisateur`,appToken:`Jeton d'application`,priority:`Priorité`,pushoverRetry:`Réessai urgence (s)`,pushoverExpire:`Expiration urgence (s)`,botToken:`Jeton du bot`,chatId:`ID du chat`,telegramThreadId:`ID du sujet de forum`,telegramThreadIdHelp:`Facultatif. Envoie dans un seul sujet d'un groupe forum : le dernier nombre du lien du sujet (t.me/c/.../25). Laisser vide pour le sujet General.`,telegramThreadIdInvalid:`L'ID du sujet de forum doit être un nombre.`,smtpServer:`Serveur SMTP`,smtpPort:`Port SMTP`,security:`Sécurité`,authentication:`Authentification`,username:`Nom d'utilisateur`,password:`Mot de passe`,fromEmail:`E-mail expéditeur`,toEmail:`E-mail destinataire`,webhookUrl:`URL du webhook`,payloadFormat:`Format du payload`,authorization:`Autorisation`,titleFieldName:`Nom du champ titre`,messageFieldName:`Nom du champ message`,editTemplate:`Modifier le modèle : {{name}}`,titleLabel:`Titre`,bodyLabel:`Corps`,titlePlaceholder:`Titre de la notification...`,bodyPlaceholder:`Corps de la notification...`,availableVariables:`Variables disponibles`,clickToInsert:`Cliquer pour insérer à la position du curseur dans le corps`,livePreview:`Aperçu en direct`,hide:`Masquer`,show:`Afficher`,loadingPreview:`Chargement de l'aperçu...`,enterTemplateContent:`Saisir le contenu du modèle pour voir l'aperçu`,titlePreview:`Titre :`,bodyPreview:`Corps :`,resetToDefault:`Réinitialiser par défaut`,titleRequired:`Le titre est requis`,bodyRequired:`Le corps est requis`,notificationLog:`Journal des notifications`,showFailedOnly:`Échecs uniquement`,last24Hours:`Dernières 24 heures`,last7Days:`7 derniers jours`,last30Days:`30 derniers jours`,last90Days:`90 derniers jours`,justNow:`À l'instant`,noFailedNotifications:`Aucune notification échouée`,noNotificationsLogged:`Aucune notification enregistrée`,unknownProvider:`Fournisseur inconnu`,logTitle:`Titre`,logMessage:`Message`,logError:`Erreur`,logProvider:`Fournisseur : {{type}}`,logTime:`Heure : {{time}}`,refresh:`Actualiser`,clearOld:`Purger les anciens`,statsSummary:`{{days}} derniers jours :`,statsNotifications:`notifications`,statsSent:`{{count}} envoyées`,statsFailed:`{{count}} échouées`,eventTypes:{print_start:`Impression démarrée`,print_complete:`Impression terminée`,print_failed:`Impression échouée`,print_stopped:`Impression arrêtée`,print_progress:`Progression`,printer_offline:`Imprimante hors ligne`,printer_error:`Erreur de l'imprimante`,filament_low:`Filament bas`,maintenance_due:`Maintenance requise`,test:`Tester`},userEmail:{title:`Notifications`,emailNotifications:`Notifications par e-mail`,emailNotificationsDesc:`Recevez des notifications par e-mail pour vos propres travaux d'impression. Les e-mails sont envoyés via les paramètres SMTP configurés dans l'authentification avancée.`,sendingTo:`Les notifications seront envoyées à`,noEmailWarning:`Votre compte n'a pas d'adresse e-mail. Contactez un administrateur pour en ajouter une.`,printJobNotifications:`Notifications de travaux d'impression`,printJobNotificationsDesc:`Choisissez quels événements déclenchent des notifications par e-mail pour les travaux d'impression que vous soumettez.`,printJobStarts:`Démarrage du travail d'impression`,printJobStartsDesc:`Être notifié quand votre travail d'impression commence.`,printJobFinishes:`Fin du travail d'impression`,printJobFinishesDesc:`Être notifié quand votre travail d'impression se termine avec succès.`,printErrors:`Erreurs d'impression`,printErrorsDesc:`Être notifié quand votre travail d'impression échoue ou rencontre une erreur.`,printJobStops:`Travail d'impression arrêté`,printJobStopsDesc:`Être notifié quand votre travail d'impression est annulé ou arrêté.`,saveSuccess:`Préférences de notification sauvegardées.`,saveError:`Impossible de sauvegarder les préférences de notification.`}},richTextEditor:{bold:`Gras`,italic:`Italique`,underline:`Souligné`,bulletList:`Liste à puces`,numberedList:`Liste numérotée`,alignLeft:`Aligner à gauche`,alignCenter:`Centrer`,alignRight:`Aligner à droite`,addLink:`Ajouter lien`,removeLink:`Retirer lien`},externalLinks:{title:`Liens de la barre latérale`,sidebarLayout:`Barre latérale`,sidebarLayoutDescription:`Affichez ou masquez les pages intégrées, ajoutez des liens externes et faites glisser les éléments pour réorganiser la navigation latérale.`,systemPages:`Pages Bambuddy`,externalLinks:`Liens externes`,visibleInSidebar:`Visible dans la barre latérale`,hiddenFromSidebar:`Masqué dans la barre latérale`,requiredInSidebar:`Obligatoire dans la barre latérale`,hidePage:`Masquer la page`,showPage:`Afficher la page`,settingsCannotBeHidden:`Les paramètres ne peuvent pas être masqués`,noLinksConfigured:`Aucun lien externe configuré`,deleteLink:`Supprimer lien`,removeCustomIcon:`Retirer icône personnalisée`,openInNewTab:`Ouvrir dans un nouvel onglet`,placeholders:{linkName:`Mon Lien`}},keyboardShortcuts:{title:`Raccourcis Clavier`,navigation:`Navigation`,archivesSection:`Archives`,kProfilesSection:`Profils K`,generalSection:`Général`,shortcuts:{goToPrinters:`Aller aux Imprimantes`,goToArchives:`Aller aux Archives`,goToQueue:`Aller à la File`,goToStats:`Aller aux Stats`,goToProfiles:`Aller aux Profils Cloud`,goToSettings:`Aller aux Paramètres`,focusSearch:`Focus recherche`,openUploadModal:`Ouvrir téléversement`,clearSelection:`Tout déselectionner`,contextMenu:`Menu contextuel (cartes)`,refreshProfiles:`Rafraîchir profils`,newProfile:`Nouveau profil`,exitSelectionMode:`Quitter mode sélection`,showHelp:`Afficher cette aide`},footer:`Échap ou clic extérieur pour fermer`},notificationLog:{title:`Journal de Notification`,events:{printStarted:`Début impression`,printComplete:`Fin impression`,printFailed:`Échec impression`,printStopped:`Arrêt impression`,progress:`Progression`,printerOffline:`Hors ligne`,printerError:`Erreur`,lowFilament:`Filament bas`,maintenanceDue:`Maintenance`,test:`Tester`},timeAgo:{justNow:`À l'instant`,minutesAgo:`Il y a {{minutes}}m`,hoursAgo:`Il y a {{hours}}h`}},restoreBackup:{title:`Restaurer Sauvegarde`,restoring:`Restauration...`,restoreComplete:`Restauration terminée`,restoreFailed:`Échec restauration`,importSettings:`Importer les réglages d'un fichier`,pleaseWait:`Patientez pendant la restauration`,clickToSelect:`Fichier .json ou .zip`,howDuplicateHandling:`Gestion des doublons :`,categories:{printers:`Imprimantes`,smartPlugs:`Prises`,notificationProviders:`Fournisseurs`,filaments:`Filaments`,archives:`Archives`,pendingUploads:`Téléversements en attente`,settingsTemplates:`Réglages & Modèles`},matchingInfo:{printers:`par numéro de série`,smartPlugs:`par adresse IP`,notificationProviders:`par nom`,filaments:`par nom+type+marque`,archives:`par empreinte numérique (hash)`,pendingUploads:`par nom de fichier`,settingsTemplates:`toujours écrasés`},replaceExisting:`Remplacer existant`,keepExisting:`Garder existant`,replaceDescription:`Écrase les doublons avec la sauvegarde`,keepDescription:`Ne restaure que les éléments absents`,caution:`Attention :`,cautionText:`L'écrasement remplacera vos réglages. Les codes d'accès imprimantes sont exclus par sécurité.`,itemsRestored:`Éléments restaurés`,itemsSkipped:`Éléments ignorés`,restored:`Restaurés`,skipped:`Ignorés (déjà présents)`,filesLabel:`Fichiers (3MF, vignettes, etc.)`,newApiKeysGenerated:`Nouvelles clés API générées`,newApiKeysWarning:`Copiées maintenant, elles ne seront plus visibles !`,processingBackup:`Traitement du fichier...`,noDataFound:`Aucune donnée trouvée dans le fichier.`,failedToRestore:`Échec restaure. Vérifiez le format.`},backupExport:{title:`Exporter Sauvegarde`,selectData:`Données à inclure`,selectAll:`Tout sélectionner`,selectNone:`Ne rien sélectionner`,categoryDescriptions:{settings:`Langue, thèmes, préférences`,notifications:`ntfy, Pushover, Discord, etc.`,templates:`Modèles de messages personnalisés`,smartPlugs:`Configuration des prises Tasmota`,externalLinks:`Liens externes de la barre latérale`,printers:`Infos imprimantes (codes d'accès exclus par défaut)`,plateDetection:`Images références des plateaux vides`,filaments:`Types et coûts filaments`,maintenance:`Plannings de maintenance personnalisés`,archives:`Données impressions + fichiers (3MF, vignettes, etc.)`,projects:`Projets, BOM, pièces jointes`,pendingUploads:`En attente revue virtuelle`,apiKeys:`Clés Webhook (nouvelles clés générées à l'import)`},requiresPrinters:`Nécessite sélection des imprimantes`,zipFileWarning:`Fichier ZIP créé.`,zipFileDescription:`Contient tous les médias. Peut être volumineux.`,includeAccessCodes:`Inclure Codes d'accès`,includeAccessCodesDescription:`Pour migrer vers une autre machine`,includeAccessCodesWarning:`Codes en texte clair. Sécurisez ce fichier !`,categoriesSelected:`{{selectedCount}} catégories choisies`},pendingUploads:{placeholders:{notes:`Notes sur l'impression...`},discardUpload:`Rejeter`,archiveAllUploads:`Tout archiver`,discardAllUploads:`Tout rejeter`,archive:`Archiver`,timeAgo:{justNow:`À l'instant`,minutesAgo:`Il y a {{minutes}}m`,hoursAgo:`Il y a {{hours}}h`,daysAgo:`Il y a {{days}}j`}},apiBrowser:{placeholders:{requestBody:`Corps JSON...`,searchEndpoints:`Chercher endpoints...`}},configureAmsSlot:{title:`Configurer le slot AMS`,slotConfigured:`Slot configuré !`,configuringSlot:`Configuration du slot :`,slotLabel:`{{ams}} – Emplacement {{slot}}`,searchPresets:`Chercher presets...`,colorPlaceholder:`Nom couleur ou hex (ex: brown, FF8800)`,clearCustomColor:`Effacer couleur perso`,noCloudPresets:`Profils Cloud absents. Connectez-vous.`,noPresetsAvailable:`Aucun preset disponible. Connectez-vous à Bambu Cloud ou importez des profils locaux.`,noMatchingPresets:`Aucun profil trouvé.`,custom:`Perso`,builtin:`Inclus`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Réglages envoyés`,filamentProfile:`Profil Filament`,kProfileLabel:`Profil K (Pressure Advance)`,filteringFor:`Filtrage pour : {{material}}`,noKProfile:`Pas de profil K (utiliser défaut 0.020)`,noMatchingKProfiles:`Aucun profil K trouvé. K=0.020 par défaut sera utilisé.`,otherKProfiles:`Autres profils K sur cette imprimante`,selectFilamentFirst:`Sélectionnez d'abord un profil filament`,kFromCalibration:`K={{value}} de la calibration imprimante`,customColorLabel:`Couleur personnalisée (optionnel)`,presetColors:`Couleurs {{name}} :`,showLessColors:`Moins de couleurs`,showMoreColors:`Plus de couleurs`,clear:`Effacer`,hexLabel:`Hex : #{{hex}}`,resetting:`Réinitialisation...`,resetSlot:`Réinitialiser le slot`,cancel:`Annuler`,configuring:`Configuration...`,configureSlot:`Configurer le slot`},githubBackup:{title:`Sauvegarde Git`,history:`Historique`,downloadBackup:`Télécharger`,restoreBackup:`Restaurer`,noBackupsYet:`Aucune sauvegarde`},emailSettings:{placeholders:{fromName:`Bambuddy`}},tagManagement:{searchTags:`Chercher tags...`,renameTag:`Renommer tag`,deleteTag:`Supprimer tag`},notificationTemplates:{placeholders:{title:`Titre notification...`,body:`Message notification...`}},batchTag:{placeholders:{newTag:`Nouveau tag...`}},photoGallery:{deletePhoto:`Supprimer photo`},filamentHoverCard:{copySpoolUuid:`Copier UUID bobine`},kProfilesView:{hasNote:`A une note`,copyProfile:`Copier profil`},layout:{openMenu:`Ouvrir menu`,noPermissionSystemInfo:`Pas d'autorisation système`},dashboard:{dragToReorder:`Glisser pour réorganiser`,hideWidget:`Masquer widget`},notificationProviderCard:{deleteNotificationProvider:`Supprimer fournisseur`},fileManagerModal:{closeFileManager:`Fermer gestionnaire`,sortFiles:`Trier fichiers`,goToParentFolder:`Dossier parent`,threeView:`Vue 3D`},embeddedCameraViewer:{refreshStream:`Actualiser flux`,close:`Fermer`,zoomOut:`Zoom -`,resetZoom:`Réinitialiser le zoom`,zoomIn:`Zoom +`,dragToResize:`Glisser pour dimension`},timelapseViewer:{skipBack5s:`-5s`,skipForward5s:`+5s`},notificationProviders:{descriptions:{email:`Notifications par email SMTP`,telegram:`Via bot Telegram`,discord:`Via webhook Discord`,ntfy:`Push auto-hébergé (ntfy)`,pushover:`Push fiable (Pushover)`,callmebot:`WhatsApp gratuit via CallMeBot`,webhook:`Requête HTTP POST personnalisée`}},logViewer:{searchPlaceholder:`Message ou nom...`,noLogEntries:`Aucune entrée journal`},switchbarPopover:{noSwitchesInSwitchbar:`Aucun interrupteur`},projectPageModal:{placeholders:{title:`Titre`,designer:`Designer`,license:`Licence`,description:`Description...`,profileTitle:`Titre du profil`,profileDescription:`Description du profil...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`En attente`,justNow:`À l'instant`,now:`Maintenant`,minsAgo:`il y a {{count}}m`,inMins:`dans {{count}}m`,hoursAgo:`il y a {{count}}h`,inHours:`dans {{count}}h`,daysAgo:`il y a {{count}}j`,inDays:`dans {{count}}j`},spoolbuddy:{nav:{dashboard:`Tableau de bord`,ams:`AMS`,inventory:`Inventaire`,writeTag:`Écrire`,settings:`Paramètres`},status:{nfcReady:`NFC prêt`,nfcOff:`NFC désactivé`,offline:`Hors ligne`,online:`En ligne`,noPrinters:`Aucune imprimante`,deviceOffline:`Appareil hors ligne`,waitingConnection:`En attente de connexion...`,systemReady:`Système prêt`,status:`Statut`},dashboard:{readyToScan:`Prêt à scanner`,idleMessage:`Placez une bobine sur la balance pour l'identifier`,nfcHint:`Le tag NFC sera lu automatiquement`,device:`Appareil`,syncWeight:`Sync. poids`,weightSynced:`Synchronisé !`,unknownTag:`Tag inconnu`,newTag:`Nouveau tag détecté`,onScale:`sur la balance`,linkSpool:`Lier à une bobine`,linkTagTitle:`Lier le tag à une bobine`,linkTag:`Lier le tag`,selectSpool:`Sélectionnez une bobine à lier à ce tag :`,noUntagged:`Aucune bobine sans tag trouvée`,tagDetected:`Tag détecté`,noTag:`Pas de tag`,tagId:`Étiquette`,grossWeight:`Poids brut`,spoolSize:`Taille bobine`,close:`Fermer`,currentSpool:`Bobine actuelle`,plateReady:`Plateau prêt : {{name}}`,plateReadyLabel:`Plateaux à libérer`,plateClearAction:`Libérer`,plateClearedToast:`Plateau marqué comme libéré`,plateClearFailed:`Impossible de marquer le plateau comme libéré`},modal:{spoolDetected:`Bobine détectée`,assignToAms:`Assigner à l'AMS`,syncWeight:`Synchroniser le poids`,weightSynced:`Synchronisé !`,syncing:`Synchronisation...`,newTagDetected:`Nouveau tag détecté`,addToInventory:`Ajouter à l'inventaire`,assignToAmsTitle:`Assigner à l'AMS`,selectSlot:`Sélectionner un emplacement`,assign:`Assigner`,assigning:`Attribution...`,assignSuccess:`Assigné !`,assignPendingInsert:`Assigné. Le slot sera configuré lors de l'insertion de la bobine.`,assignError:`Échec de l'attribution de la bobine. Veuillez réessayer.`,noPrinterSelected:`Sélectionner une imprimante...`,noAmsDetected:`Aucun AMS détecté sur cette imprimante`,slot:`Emplacement`},weight:{noReading:`Pas de lecture`,stable:`Stable`,measuring:`Mesure...`,tare:`Tarer`,calibrate:`Calibrer`},spool:{remaining:`Restant`,material:`Matériau`,brand:`Marque`,color:`Couleur`,coreWeight:`Noyau`,labelWeight:`Étiquette`,scaleWeight:`Balance`,netWeight:`Réseau`,lastUsed:`Dernière utilisation`,unknownColor:`Couleur inconnue`},ams:{noData:`Aucun AMS détecté`,connectAms:`Connectez un AMS pour voir les slots`,noPrinter:`Aucune imprimante sélectionnée`,selectPrinter:`Sélectionnez une imprimante dans la barre supérieure`,printerDisconnected:`Imprimante déconnectée`,humidity:`Humidité`,level:`Niveau`,active:`Actif`,slot:`Emplacement`,empty:`Vide`},inventory:{search:`Rechercher des bobines...`,empty:`Aucune bobine dans l'inventaire`,noResults:`Aucune bobine correspondante`,spools:`bobines`,addSpool:`Ajouter une bobine`},settings:{tabDevice:`Appareil`,tabDisplay:`Affichage`,tabScale:`Balance`,tabUpdates:`Mises à jour`,nfcReader:`Lecteur NFC`,type:`Type`,connection:`Connexion`,notConnected:`N/D`,deviceInfo:`Info appareil`,hostname:`Hôte`,uptime:`Temps de fonctionnement`,brightness:`Luminosité`,saved:`Enregistré`,noBacklight:`Aucun rétroéclairage DSI détecté. Le contrôle de luminosité nécessite un écran DSI.`,screenBlank:`Délai d'extinction`,screenBlankDesc:`L'écran s'éteint après inactivité. Touchez pour réveiller.`,displayNote:`La luminosité est appliquée comme filtre logiciel.`,scaleCalibration:`Calibration de la balance`,currentWeight:`Poids actuel`,tareOffset:`Tare`,calFactor:`Facteur`,knownWeight:`Poids connu`,calStep1:`Retirez tout de la balance et appuyez sur Mettre à zéro.`,calStep2:`Placez le poids connu sur la balance.`,setZero:`Mettre à zéro`,calibrateNow:`Calibrer`,calibrated:`Calibré`,tareSet:`Commande de tare envoyée. En attente de l'appareil...`,tareComplete:`Tare terminée !`,tareTimedOut:`Délai de tare dépassé — le daemon SpoolBuddy fonctionne-t-il ?`,tareFailed:`Échec de l'envoi de la commande de tare`,zeroSet:`Point zéro défini. Placez le poids connu sur la balance.`,calibrationDone:`Calibration terminée !`,calibrationFailed:`Échec de la calibration`,lastCalibrated:`Dernière calibration`,stable:`Stable`,settling:`Stabilisation...`,firmware:`Micrologiciel`,scale:`Balance`,noDevice:`Aucun appareil SpoolBuddy trouvé`,daemonVersion:`Version du daemon`,currentVersion:`Actuelle`,versionPending:`En attente du daemon...`,checking:`Vérification...`,checkUpdates:`Vérifier les mises à jour`,updateAvailable:`Mise à jour disponible`,updateInstructions:`Mise à jour via SSH : exécutez le script d'installation SpoolBuddy.`,upToDate:`À jour`,includeBeta:`Inclure les versions bêta`,systemConfig:`Backend & authentification`,backendUrl:`URL du backend Bambuddy`,apiToken:`Jeton d'API`,apiTokenPlaceholder:`Saisir un jeton d'API`,saveConfig:`Enregistrer la configuration`,systemQueued:`Configuration mise en file.`,systemFieldsRequired:`L'URL du backend est obligatoire.`,nfcDiagnostic:`Diagnostic NFC`,scaleDiagnostic:`Diagnostic balance`,readTagDiagnostic:`Diagnostic lecture de tag`,testNfc:`Tester le lecteur`,testScale:`Tester la précision`,testReadTag:`Lire un tag`},writeTag:{tabExisting:`Bobine existante`,tabNew:`Nouvelle bobine`,tabReplace:`Remplacer le tag`,searchPlaceholder:`Rechercher par matériau, couleur, marque...`,noUntaggedSpools:`Aucune bobine sans tag`,noTaggedSpools:`Aucune bobine avec tag`,selectSpool:`Sélectionnez une bobine, puis placez un NTAG sur le lecteur`,placeTag:`Placez un NTAG sur le lecteur`,tagReady:`Tag détecté — prêt à écrire`,writeTag:`Écrire le tag`,replaceTag:`Remplacer le tag`,writing:`Écriture du tag...`,waiting:`En attente de SpoolBuddy...`,writeSuccess:`Tag écrit avec succès !`,writeFailed:`Échec de l'écriture`,queueFailed:`Impossible de mettre en file la commande d'écriture`,tryAgain:`Réessayer`,cancel:`Annuler`,replaceWarning:`L'ancien tag sera dissocié. Le nouveau tag le remplacera.`,deviceOffline:`SpoolBuddy est hors ligne`,material:`Matériau`,colorName:`Nom de la couleur`,color:`Couleur`,brand:`Marque`,weight:`Poids (g)`,createSpool:`Créer la bobine`,creating:`Création...`,spoolCreated:`Bobine créée ! Prêt à écrire.`,createFailed:`Impossible de créer la bobine`,incompleteDataWarning:`Tag écrit avec des données Spoolman incomplètes`},quickMenu:{printerPower:`Alimentation imprimante`,systemControls:`Système`,restartDaemon:`Redémarrer le daemon`,restartBrowser:`Redémarrer le navigateur`,reboot:`Redémarrer`,shutdown:`Éteindre`,swipeToClose:`Glisser vers le bas pour fermer`,confirmTitle:`Confirmer`,confirmShutdown:`Êtes-vous sûr de vouloir éteindre le SpoolBuddy ? Vous aurez besoin d'un accès physique pour le rallumer.`,confirmReboot:`Êtes-vous sûr de vouloir redémarrer le SpoolBuddy ?`,confirmRestartDaemon:`Redémarrer le daemon SpoolBuddy ? Le NFC et la balance seront temporairement indisponibles.`,confirmRestartBrowser:`Redémarrer le navigateur kiosque ? L'écran sera brièvement noir.`,confirm:`Confirmer`,confirmPlugOn:`Allumer {{name}} ?`,confirmPlugOff:`Éteindre {{name}} ?`,turnOn:`Allumer`,turnOff:`Éteindre`}},diagnostic:{modalTitle:`Diagnostic de connexion — {{name}}`,running:`Diagnostic en cours...`,runningElapsed:`Diagnostic en cours... ({{elapsed}}s)`,waitingForReportHint:`En attente que l'imprimante publie un rapport d'état — cela peut prendre jusqu'à {{max}} secondes.`,runFailed:`Le diagnostic n'a pas pu s'exécuter : {{error}}`,retry:`Relancer`,runButton:`Lancer le diagnostic`,sectionTitle:`Diagnostic de connexion`,sectionDescription:`Vérifiez pourquoi une imprimante ne se connecte pas ou n'imprime pas — accessibilité des ports, mode développeur LAN, mode réseau Docker et identifiants.`,noPrinters:`Aucune imprimante configurée.`,overall:{ok:`Aucun problème détecté — la connexion de l'imprimante semble correcte.`,warnings:`L'imprimante devrait fonctionner, mais certains points nécessitent votre attention.`,problems:`Des problèmes expliquant pourquoi l'imprimante ne se connecte pas ou n'imprime pas ont été détectés.`},check:{port_mqtt:{title:`Port de contrôle (MQTT 8883)`,pass:`Accessible — l'imprimante accepte les connexions de contrôle.`,fail:`Le port 8883 est inaccessible. L'imprimante est éteinte, possède une autre adresse IP, ou un pare-feu la bloque. Vérifiez l'IP de l'imprimante et qu'aucun élément ne bloque le port 8883.`},port_ftps:{title:`Port de transfert de fichiers (FTPS 990)`,pass:`Accessible — l'envoi de fichiers d'impression fonctionnera.`,warn:`Le port 990 est inaccessible. La surveillance peut toujours fonctionner, mais l'envoi d'impressions vers l'imprimante échouera. Assurez-vous que le port 990 n'est pas bloqué.`,warn_no_tls:`Le port 990 est ouvert, mais le service de fichiers de l'imprimante ne termine pas la négociation TLS. Les fichiers d'impression, les aperçus et les timelapses ne peuvent pas être récupérés, les archives restent donc vides. Redémarrez l'imprimante — débloquer le port n'y changera rien.`},external_storage:{title:`Stocker les fichiers envoyés sur stockage externe (étape 4 de l'installation)`,pass:`L'imprimante signale que cette option est activée — les fichiers envoyés seront stockés sur la carte SD et les archives auront des miniatures et des métadonnées slicer.`,fail:`L'imprimante signale que cette option est désactivée. Activez « Stocker les fichiers envoyés sur stockage externe » — sur les firmwares récents (P2S 01.02 / Bambu Studio 2.6+) l'interrupteur se trouve dans les Paramètres d'impression de l'imprimante ; sur les versions antérieures, il est dans l'onglet Périphérique de Bambu Studio / OrcaSlicer. Sans cette option, chaque impression archivée est dépourvue de miniature et de métadonnées slicer.`,skip:`Non vérifié — une connexion MQTT active est requise. Sur les slicers plus anciens où ce paramètre n'existe que dans le slicer, l'imprimante ne le signale pas, donc cette vérification passe même si l'option est désactivée — vérifiez l'étape 4 de l'installation manuellement.`,skip_unsupported_model:`Ce modèle a un emplacement SD mais aucun moyen d'activer l'option — le firmware actuel de la série P1 n'affiche pas le bouton dans Bambu Studio et l'imprimante n'a pas d'écran. Il n'y a rien à corriger ici ; les impressions archivées peuvent manquer de miniatures et de métadonnées du slicer jusqu'à ce que Bambu Lab l'ajoute par firmware.`,fail_no_media:`L'option est activée, mais l'imprimante ne signale ni carte ni clé dans son emplacement : les fichiers envoyés n'ont nulle part où aller. Insérez-en une et relancez une impression — d'ici là, chaque impression archivée sera dépourvue de miniature et de métadonnées slicer.`,warn_internal_storage:`L'option est activée et un stockage est présent, mais la dernière impression est tout de même allée dans le stockage interne de l'imprimante, que Bambuddy ne peut pas lire. Sur les séries H2, P2S et X2D, le bouton « Imprimer » de Bambu Studio y envoie toujours, quel que soit ce réglage. Les impressions sont archivées avec leur nom et leurs durées, mais sans miniature ni métadonnées slicer. Pour des archives complètes, lancez les impressions depuis Bambuddy ou tranchez dans OrcaSlicer, ou bien dans Bambu Studio utilisez « Envoyer » avec « Externe » puis lancez l'impression.`,warn_internal_history:`L'option est activée et un stockage est présent, mais la dernière impression est partie d'un fichier déjà présent sur l'imprimante : une réimpression depuis son écran, un lancement depuis Handy ou un fichier envoyé plus tôt. Cette bibliothèque réside dans le stockage interne, que Bambuddy ne peut pas lire, et aucun réglage n'y change rien, puisque rien n'a été envoyé pour cette impression. Elle reste archivée avec son nom et ses durées, mais sans miniature ni métadonnées slicer. Pour des archives complètes, lancez les impressions depuis Bambuddy ou envoyez-les depuis le trancheur.`},port_rtsps:{title:`Port caméra ({{protocol}} {{port}})`,pass:`Accessible — le flux de la caméra fonctionnera.`,warn:`Le port {{port}} est inaccessible. La vue caméra en direct ne fonctionnera pas. Cela n'affecte pas l'impression.`},macos_local_network:{title:`Autorisation « Réseau local » de macOS`,pass:`macOS autorise Bambuddy à accéder au réseau local.`,warn_unsigned:`Le Python qui exécute Bambuddy n’a pas de signature de code : macOS n’a donc rien à quoi rattacher l’autorisation « Réseau local » et rejette silencieusement toutes les connexions vers l’imprimante, sans erreur ni demande. Lancez le script de mise à jour de Bambuddy (install/update_macos.sh), qui le signe, puis redémarrez Bambuddy. Interpréteur : {{executable}}`,warn_permission:`Si l’imprimante est allumée et joignable à cette adresse, ouvrez Réglages Système > Confidentialité et sécurité > Réseau local et vérifiez que le Python de Bambuddy est activé. Sinon macOS rejette les connexions locales en silence, et une mise à jour de Python peut laisser l’ancienne autorisation derrière elle.`},network_mode:{title:`Mode réseau du conteneur`,genericRuntime:`un conteneur`,pass:`Fonctionne dans {{runtime}} en réseau host.`,warn:`Bambuddy fonctionne dans {{runtime}} en réseau bridge. La découverte d'imprimantes et l'imprimante virtuelle nécessitent le mode réseau host — recréez le conteneur en réseau host ("network_mode: host" dans docker-compose, "--network=host" pour Podman).`,skip:`Ne fonctionne pas dans un conteneur — non applicable.`,skip_unknown:`Bambuddy fonctionne dans {{runtime}}, mais son mode réseau n'a pas pu être déterminé. Si la découverte d'imprimantes ou l'imprimante virtuelle ne fonctionnent pas, recréez le conteneur en réseau host.`,skip_system_container:`Bambuddy fonctionne dans un conteneur système {{runtime}}, présent sur le LAN comme une machine virtuelle — non applicable.`},subnet:{title:`Sous-réseau`,pass:`L'imprimante et Bambuddy sont sur le même sous-réseau.`,warn:`L'imprimante ({{printer_ip}}) et Bambuddy ({{host_ip}}) sont sur des sous-réseaux différents. Ils peuvent ne pas se joindre, sauf si un routage entre les sous-réseaux est configuré.`,skip:`Le sous-réseau n'a pas pu être déterminé — ignoré.`},mqtt_auth:{title:`Identifiants de l'imprimante`,pass:`L'imprimante a accepté la connexion.`,fail:`L'imprimante est accessible mais Bambuddy n'y est pas connecté. Le code d'accès ou le numéro de série est très probablement incorrect — le code d'accès change chaque fois que le mode LAN uniquement ou le mode développeur est activé/désactivé, recopiez-le donc depuis l'écran de l'imprimante. Une imprimante en cours de redémarrage, ou ayant déjà atteint sa limite de connexions simultanées, produit le même résultat.`,fail_auth_rejected:`L'imprimante a refusé les identifiants de Bambuddy. Le code d'accès ou le numéro de série est incorrect — le code d'accès change chaque fois que le mode LAN uniquement ou le mode développeur est activé/désactivé. Recopiez-le depuis l'écran de l'imprimante et enregistrez-le dans les paramètres de l'imprimante.`,skip:`Non vérifié — l'imprimante n'a pas pu être jointe.`},developer_mode:{title:`Mode développeur LAN`,pass:`Le mode développeur est activé.`,fail:`Le mode développeur est DÉSACTIVÉ sur l'imprimante. Activez-le dans les paramètres LAN de l'imprimante — et confirmez avec OK. Sans lui, les impressions ne démarreront pas.`,skip:`Impossible à vérifier — nécessite une connexion active à l'imprimante.`},printer_publishing:{title:`L'imprimante publie son état`,pass:`L'imprimante publie des mises à jour d'état — l'AMS, les filaments et les profils K seront correctement reflétés dans le slicer.`,fail:`Le broker MQTT a accepté la connexion mais l'imprimante n'a publié aucun rapport d'état. Il s'agit presque toujours d'un numéro de série erroné ou mal capitalisé — le topic device/<serial>/report est sensible à la casse. Vérifiez le numéro de série dans les paramètres de l'imprimante par rapport à l'écran de la machine.`,skip:`Impossible à vérifier — nécessite une connexion active à l'imprimante.`}}},systemHealth:{sectionTitle:`État du système`,sectionDescription:`Analyse les journaux récents à la recherche de problèmes connus que vous pouvez généralement résoudre vous-même, avant qu'ils ne deviennent un ticket de support.`,rescan:`Relancer l'analyse`,clean:`Aucun problème connu trouvé dans les {{times}} dernières entrées de journal.`,logUnavailable:`La journalisation dans un fichier est désactivée, les journaux ne peuvent donc pas être analysés. Activez la journalisation dans un fichier pour utiliser cette vérification.`,learnMore:`Comment corriger`,fixLabel:`Correctif :`,occurrences:`Vu {{times}}× — dernière fois à {{lastSeen}}`,category:{layer8:`Vous pouvez corriger ceci`,environment:`Environnement`,bug:`Merci de le signaler`},signature:{"ftp-auth-rejected":{name:`L'imprimante a refusé le code d'accès`,cause:`L'imprimante a refusé la connexion de transfert de fichiers. Le code d'accès est incorrect, ou il a changé après l'activation du mode développeur.`,fix:`Recopiez le code d'accès depuis l'écran de l'imprimante (paramètres LAN) et mettez-le à jour dans les paramètres de l'imprimante dans Bambuddy.`},"ftp-connection-timeout":{name:`Délai de connexion de transfert de fichiers dépassé`,cause:`Bambuddy n'a pas pu atteindre le port de transfert de fichiers de l'imprimante (FTPS 990). Le port est bloqué, ou l'imprimante est éteinte ou sur un autre sous-réseau.`,fix:`Assurez-vous que rien ne bloque le port 990 entre Bambuddy et l'imprimante, et que les deux sont sur le même réseau.`},"ftp-ssl-error":{name:`Échec de la négociation sécurisée du transfert de fichiers`,cause:`Le service de fichiers de l'imprimante a répondu sur le port 990 sans TLS. Son serveur de fichiers est bloqué : c'est une panne côté imprimante, pas un problème de pare-feu ou de micrologiciel.`,fix:`Redémarrez l'imprimante. D'ici là, les fichiers d'impression, les vignettes et les timelapses ne peuvent pas être récupérés ; l'impression elle-même n'est pas affectée.`},"bambu-cloud-captcha":{name:`Bambu Cloud demande un CAPTCHA`,cause:`La protection anti-abus de Bambu contrôle ce réseau, aucune connexion à Bambu Cloud ne peut donc aboutir. Cela dépend de l'adresse IP publique, pas de votre compte ni de cette installation.`,fix:`Patientez : cela disparaît généralement en quelques heures, et les tentatives répétées le prolongent. En attendant, connectez-vous avec un jeton d'accès issu d'une session de navigateur.`},"mqtt-connection-flapping":{name:`La connexion à l'imprimante se coupe sans cesse`,cause:`La connexion de contrôle (MQTT 8883) se déconnecte et se reconnecte à répétition — généralement à cause d'un réseau faible ou d'un port partiellement bloqué.`,fix:`Vérifiez le signal Wi-Fi près de l'imprimante, privilégiez une connexion filaire et assurez-vous que le port 8883 est accessible de façon fiable.`},"camera-connection-refused":{name:`Flux de la caméra inaccessible`,cause:`La caméra en direct n'a pas pu être atteinte sur le port RTSPS 322. Le port est bloqué, ou la caméra ou la vue en direct par LAN est désactivée sur l'imprimante.`,fix:`Activez la caméra et la vue en direct par LAN sur l'imprimante, et assurez-vous que le port 322 n'est pas bloqué. Cela n'affecte pas l'impression.`},"database-locked":{name:`Conflits d'écriture dans la base de données`,cause:`La base de données SQLite rencontre des erreurs "database is locked" sous charge — fréquent lorsque plusieurs imprimantes sont utilisées en même temps.`,fix:`Faites passer Bambuddy à une base de données PostgreSQL externe. Consultez le guide PostgreSQL dans la documentation.`}}},vpDiagnostic:{title:`Vérification de configuration — {{name}}`,runButton:`Lancer la vérification`,running:`Vérification de configuration en cours...`,runFailed:`Impossible de lancer la vérification de configuration : {{error}}`,retry:`Relancer`,overall:{ok:`Toutes les vérifications ont réussi — cette imprimante virtuelle est correctement configurée.`,warnings:`L'imprimante virtuelle devrait fonctionner, mais certains points nécessitent votre attention.`,problems:`Des problèmes ont été trouvés qui expliquent pourquoi le slicer ne voit pas ou ne peut pas utiliser cette imprimante virtuelle.`},check:{enabled:{title:`Imprimante virtuelle activée`,fail:`Cette imprimante virtuelle est désactivée. Activez-la pour qu'elle soit détectable.`},running:{title:`Services en cours d'exécution`,fail:`L'imprimante virtuelle est activée mais ses services ne sont pas en cours d'exécution. Consultez le journal Bambuddy — un conflit d'IP de liaison ou une erreur de permission les arrête généralement.`},bind_interface:{title:`Interface réseau de liaison`,fail:`L'interface de liaison n'est pas définie ou n'existe plus sur cet hôte. Choisissez une interface actuelle dans la liste "Interface de liaison".`},access_code:{title:`Code d'accès défini`,fail:`Aucun code d'accès n'est défini. Le slicer doit recevoir le même code d'accès à 8 caractères que celui que vous définissez ici.`},target_printer:{title:`Imprimante cible`,fail:`Aucune imprimante cible n'est sélectionnée. Le mode proxy a besoin d'une vraie imprimante vers laquelle transférer.`,warn:`L'imprimante cible est hors ligne pour le moment — le transfert reprendra dès qu'elle se reconnectera.`},port_ftps:{title:`Service de téléversement de fichiers (port {{port}})`,fail:`Rien n'écoute sur le port {{port}} de l'IP de liaison, le slicer ne peut donc pas téléverser de fichiers. La cause habituelle est un conflit de port sur cette interface.`},port_mqtt:{title:`Service de contrôle (port {{port}})`,fail:`Rien n'écoute sur le port {{port}} de l'IP de liaison, le slicer ne peut donc pas se connecter ni afficher l'état.`},port_bind:{title:`Service de détection (port {{port}})`,fail:`Rien n'écoute sur le port {{port}} de l'IP de liaison, la poignée de main de détection du slicer échoue donc.`},privileged_ports:{title:`Liaison aux ports privilégiés`,fail:`Le port {{port}} est inférieur à 1024 et ce service n'est pas autorisé à s'y lier — c'est pourquoi rien n'écoute ci-dessus. Ajoutez AmbientCapabilities=CAP_NET_BIND_SERVICE dans /etc/systemd/system/bambuddy.service puis redémarrez, ou exécutez "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))". Sous Docker, ajoutez cap_add: [NET_BIND_SERVICE].`},certificate:{title:`Certificat TLS`,pass:`Certificat prêt. Assurez-vous que le certificat CA Bambuddy (ci-dessus) est importé dans le magasin de confiance de votre slicer.`,fail:`Le certificat TLS de cette imprimante virtuelle est manquant. Vérifiez que le répertoire de données Bambuddy est accessible en écriture.`}}},bugReport:{logHealthSummary:`Problèmes connus trouvés dans vos journaux`,logHealthIntro:`Les journaux récents correspondent à des problèmes connus. Consultez les correctifs ci-dessous — les résoudre pourrait régler votre problème sans rapport de bogue. Vous pouvez tout de même envoyer un rapport ci-dessous.`,title:`Signaler un bug`,description:`Description`,descriptionPlaceholder:`Qu'est-ce qui n'a pas fonctionné ? Veuillez décrire le problème...`,email:`E-mail (optionnel)`,emailPlaceholder:`votre@email.fr`,emailPrivacy:`Si fourni, votre e-mail sera inclus dans une section repliée de l'issue GitHub pour que le mainteneur puisse vous contacter.`,screenshot:`Capture d'écran`,uploadOrPaste:`Télécharger, coller ou glisser une image`,dataCollectedSummary:`Quelles données sont incluses dans le rapport ?`,dataIncluded:`Inclus :`,dataIncludedList:`Version de l'app, OS, architecture, version Python, statistiques de base de données (compteurs uniquement), modèles d'imprimantes, nombre de buses, versions firmware, état de connexion, état des intégrations (Spoolman, MQTT, HA), paramètres non sensibles, nombre d'interfaces réseau, détails Docker, versions des dépendances.`,dataNeverIncluded:`Jamais inclus :`,dataNeverIncludedList:`Noms d'imprimantes, numéros de série, codes d'accès, mots de passe, adresses IP, adresses e-mail, clés API, tokens, URLs de webhook, noms d'hôtes ou noms d'utilisateurs.`,submit:`Envoyer`,startLogging:`Lancer la journalisation`,stepEnableLogging:`Journalisation activée`,stepReproduce:`Reproduisez le problème`,stepStopLogging:`Arrêter & envoyer`,stopAndSubmit:`Arrêter & Envoyer`,maxDuration:`Arrêt auto après {{minutes}} min`,stoppingLogs:`Collecte des journaux & envoi...`,submitting:`Envoi du rapport de bug...`,submittingStepConnection:`Vérification de la connectivité des imprimantes`,submittingStepVirtualPrinters:`Vérification de la configuration des imprimantes virtuelles`,submittingStepLogScan:`Analyse des journaux récents pour les problèmes connus`,submittingStepSubmit:`Envoi du rapport vers GitHub`,submitSuccess:`Rapport de bug envoyé avec succès !`,submitFailed:`Échec de l'envoi du rapport de bug`,diagnosticChecking:`Vérification des connexions des imprimantes...`,diagnosticHealthy:`Vérification de connexion réussie — aucun problème détecté sur vos imprimantes.`,diagnosticSummary:`{{problems}} imprimante(s) sur {{total}} ont des problèmes de connexion`,diagnosticIntro:`Une ou plusieurs imprimantes ont un problème de connexion qui pourrait être à l'origine de votre problème. Dépliez une imprimante ci-dessous pour voir la solution — la résoudre pourrait régler le problème sans rapport de bug. Vous pouvez tout de même envoyer un rapport ci-dessous.`,thankYou:`Merci !`,submitted:`Votre rapport de bug a été soumis.`,viewIssue:`Voir l'issue`,closeKeepsRecording:`Vous pouvez fermer ce panneau pendant que vous reproduisez le problème : l'enregistrement continue et sa réouverture vous ramènera ici.`,resumeRecording:`Rapport de bogue en cours d'enregistrement — {{elapsed}}. Cliquez pour terminer.`,resumeReport:`Reprendre le rapport`,unexpectedError:`Une erreur inattendue est survenue`},failureDetection:{title:`Détection d'échec par IA`,description:`Surveille les impressions via une API ML Obico auto-hébergée et agit automatiquement sur les échecs détectés.`,mlUrl:`URL de l'API ML Obico`,mlUrlHint:`URL de base de votre conteneur Obico ml_api auto-hébergé (ex. http://192.168.1.10:3333).`,mlToken:`Jeton de l'API ML (facultatif)`,mlTokenPlaceholder:`Laissez vide si le serveur fonctionne sans ML_API_TOKEN`,mlTokenHint:`Doit correspondre à la variable d'environnement ML_API_TOKEN de votre conteneur Obico ml_api. Laissez vide si le conteneur fonctionne sans jeton.`,test:`Tester`,testSuccess:`API ML accessible et fonctionnelle.`,testSuccessTokenUnknown:`API ML accessible et fonctionnelle. Le jeton n'a pas pu être vérifié.`,testFailed:`Impossible d'atteindre l'API ML.`,sensitivity:`Sensibilité`,sensitivityLow:`Basse (moins de faux positifs)`,sensitivityMedium:`Moyenne (équilibrée)`,sensitivityHigh:`Haute (détection précoce, plus de faux positifs)`,sensitivityHint:`Ajuste les seuils de confiance qui déclenchent les avertissements et les échecs.`,action:`Action sur échec détecté`,actionNotify:`Notifier uniquement`,actionPause:`Mettre en pause`,actionPauseOff:`Pause et couper l'alimentation`,pollInterval:`Intervalle de vérification (secondes)`,pollIntervalHint:`Fréquence de vérification de chaque imprimante pendant l'impression. Minimum 5s, maximum 120s.`,externalUrlMissing:`L'URL externe n'est pas définie.`,externalUrlHint:`L'API ML récupère la capture caméra par URL. Définissez l'URL externe dans les paramètres généraux pour que le conteneur API ML puisse atteindre Bambuddy.`,perPrinterTitle:`Imprimantes surveillées`,perPrinterHint:`Choisissez quelles imprimantes le service de détection surveille.`,monitorAll:`Surveiller toutes les imprimantes connectées`,statusTitle:`Statut`,serviceRunning:`Service en cours d'exécution`,thresholds:`Seuils bas / haut`,activePrinters:`Impressions actives`,noActivePrints:`Aucune impression en cours.`,historyTitle:`Détections récentes`,noHistory:`Aucune détection pour le moment.`},makerworld:{title:`MakerWorld`,description:`Collez une URL de modèle MakerWorld pour l'importer et l'imprimer directement depuis Bambuddy — sans passer par l'application Bambu Handy.`,pasteUrlHeader:`Importer depuis MakerWorld`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… ou collez n'importe quel lien MakerWorld`,resolveButton:`Résoudre`,signInRequiredTitle:`Connexion Bambu Cloud requise pour télécharger`,signInRequiredBody:`Vous pouvez consulter les détails du modèle anonymement, mais MakerWorld nécessite un compte Bambu Cloud pour télécharger les fichiers 3MF.`,signInExpiredTitle:`Session Bambu Cloud expirée`,signInExpiredBody:`Vous êtes toujours connecté à Bambuddy, mais Bambu Lab n'accepte plus le jeton enregistré : les téléchargements échoueront. Reconnectez-vous à Bambu Cloud.`,openCloudSettings:`Ouvrir les paramètres Cloud`,untitledModel:`Modèle sans titre`,byCreator:`par {{name}}`,downloadsCount:`{{count}} téléchargements`,licensePrefix:`Licence`,alreadyImported:`Déjà dans la bibliothèque`,openOnMakerworld:`Ouvrir sur MakerWorld`,alreadyInLibrary:`Ce modèle est déjà dans votre bibliothèque — retrouvez-le dans Gestionnaire de fichiers → MakerWorld`,importSuccess:`{{filename}} importé — enregistré dans Gestionnaire de fichiers → MakerWorld`,platesHeader:`Plateaux ({{count}})`,plateDefaultName:`Plateau {{n}}`,materialCount:`{{count}} filaments`,amsRequired:`AMS requis`,slicedFor:`Découpé pour {{printer}}`,alsoCompatible:`Également marqué compatible : {{printers}}`,importToLibrary:`Enregistrer`,sliceIn:`Enregistrer et découper dans {{slicer}}`,disclaimer:`L'intégration MakerWorld utilise des points de terminaison API documentés par la communauté. Bambuddy n'est ni affilié ni approuvé par MakerWorld ou Bambu Lab.`,lastImportSuccess:`Importé dans votre bibliothèque`,lastImportAlreadyInLibrary:`Déjà dans votre bibliothèque`,viewInLibrary:`Voir dans le Gestionnaire de fichiers`,openInBambuStudio:`Ouvrir dans Bambu Studio`,openInOrcaSlicer:`Ouvrir dans OrcaSlicer`,importTo:`Importer dans le Gestionnaire de fichiers`,recentImportsHeader:`Imports récents`,phaseResolving:`Résolution`,phaseDownloading:`Téléchargement`,folderAuto:`MakerWorld (par défaut)`,importAll:`Tout importer`,importAllProgress:`Importation de {{current}}/{{total}}`,openGallery:`Ouvrir la galerie d'images`,galleryPrev:`Image précédente`,galleryNext:`Image suivante`,deleteImport:`Retirer de la bibliothèque`,importDeleting:`Suppression…`,importDeleted:`Retiré de la bibliothèque`,confirmDelete:`Retirer {{filename}} de la bibliothèque ? Le fichier local est supprimé, mais la plaque peut être ré-importée depuis MakerWorld.`,errors:{resolveFailed:`Impossible de résoudre cette URL MakerWorld.`,downloadFailed:`Le téléchargement a échoué. Veuillez réessayer.`,deleteFailed:`Impossible de retirer le fichier de la bibliothèque.`}},gcodeViewer:{filamentSlot:`Filament {{n}}`,loading:`Lecture de la trajectoire…`,loadFailed:`Impossible de charger le G-code de ce fichier.`,showTravel:`Déplacements à vide`,topLayer:`Couche supérieure`,bottomLayer:`Couche inférieure`,noSource:`Aucun fichier à prévisualiser n’a été indiqué.`,view:{filament:`Filament`,feature:`Élément`,height:`Hauteur`,width:`Largeur`},feature:{wall:`Parois`,sparseInfill:`Remplissage clairsemé`,solidInfill:`Remplissage plein`,bridge:`Pont / surplomb`,support:`Support`,skirt:`Jupe / bordure`,gapFill:`Remplissage des vides`,ironing:`Lissage`,primeTower:`Tour de purge`},back:`Retour`,backToArchives:`Retour aux archives d'impression`,backToFiles:`Retour au gestionnaire de fichiers`,plates:`Plateaux`,plateN:`Plaque {{n}}`},libraryTrash:{title:`Corbeille`,headerButton:`Corbeille`,headerTooltip:`Voir les fichiers déplacés dans la corbeille`,backToFiles:`Retour au gestionnaire de fichiers`,subtitleAdmin:`Les fichiers supprimés restent ici pendant {{days}} jours, puis sont supprimés automatiquement. Cette vue affiche la corbeille de tous les utilisateurs.`,subtitleUser:`Les fichiers supprimés restent ici pendant {{days}} jours, puis sont supprimés automatiquement.`,loading:`Chargement de la corbeille…`,loadError:`Impossible de charger la corbeille.`,empty:`La corbeille est vide.`,summary:`{{count}} fichiers · {{size}}`,emptyTrash:`Vider la corbeille`,restore:`Restaurer`,purgeNow:`Supprimer maintenant`,autoPurgeIn:`Suppression automatique dans {{when}}`,days:`jours`,retentionLabel:`Supprimer automatiquement après`,selectAll:`Tout sélectionner`,selectOne:`Sélectionner {{filename}}`,selectionCount:`{{count}} sélectionné(s)`,bulkRestore:`Restaurer la sélection`,bulkPurge:`Supprimer la sélection`,col:{filename:`Fichier`,folder:`Dossier`,size:`Taille`,deleted:`Mis à la corbeille`,autoPurge:`Suppression auto.`,owner:`Propriétaire`,actions:`Actions`},confirm:{purgeTitle:`Supprimer définitivement ?`,purgeBody:`{{filename}} sera supprimé du disque et ne pourra pas être restauré.`,emptyTitle:`Vider la corbeille ?`,emptyBody:`Tous les {{count}} fichiers seront supprimés du disque. Cette action est irréversible.`,bulkPurgeTitle:`Supprimer définitivement les fichiers sélectionnés ?`,bulkPurgeBody:`Les {{count}} fichiers sélectionnés seront supprimés du disque et ne pourront pas être restaurés.`,cta:`Supprimer définitivement`},toast:{restored:`Fichier restauré.`,restoreFailed:`Impossible de restaurer le fichier.`,purged:`Fichier supprimé définitivement.`,purgeFailed:`Impossible de supprimer le fichier.`,emptied:`{{count}} fichier(s) supprimé(s) de la corbeille.`,emptyFailed:`Impossible de vider la corbeille.`,retentionSaved:`Suppression automatique réglée sur {{days}} jours.`,retentionFailed:`Impossible d'enregistrer le réglage de rétention.`,bulkRestored:`{{count}} fichier(s) restauré(s).`,bulkPurged:`{{count}} fichier(s) supprimé(s).`}},libraryPurge:{title:`Purger les anciens fichiers`,headerButton:`Purger`,headerTooltip:`Déplacer en masse les anciens fichiers vers la corbeille`,description:`Les fichiers plus anciens que le seuil seront déplacés vers la corbeille. Les dossiers externes sont ignorés. Vous pouvez restaurer depuis la corbeille avant la suppression automatique.`,ageLabel:`Déplacer les fichiers plus anciens que`,days:`jours`,includeNeverPrinted:`Inclure les fichiers jamais imprimés`,effectsTitle:`Ce qui se passe lorsque vous cliquez sur Purger`,effect1:`Les fichiers correspondants sont déplacés vers la corbeille — pas encore supprimés du disque.`,effect2:`Vous pouvez les restaurer depuis la corbeille jusqu'à l'expiration de la fenêtre de rétention.`,effect3:`Après la période de rétention, le balayeur de corbeille les supprime définitivement.`,effect4:`Les fichiers dans les dossiers externes (liés) sont ignorés — Bambuddy ne supprime jamais d'octets qu'il ne possède pas.`,previewLoading:`Vérification du nombre de fichiers concernés…`,previewFailed:`Impossible de prévisualiser la purge.`,previewSummary:`{{count}} fichiers · {{size}} seraient déplacés vers la corbeille`,andMore:`…et {{count}} de plus`,warning:`Les fichiers sont supprimés en douceur — vous pouvez les restaurer depuis la corbeille jusqu'à l'expiration de la période de rétention.`,confirmCta:`Déplacer {{count}} vers la corbeille`,purging:`Déplacement vers la corbeille…`,toast:{success:`{{count}} fichier(s) déplacé(s) vers la corbeille.`,failed:`Impossible de purger les fichiers.`}},libraryAutoPurge:{enableLabel:`Purge automatique des anciens fichiers`,enableDescription:`Exécute la purge administrateur une fois par jour. Les fichiers sont d'abord déplacés vers la corbeille — ils ne sont pas supprimés immédiatement.`,ageLabel:`Purger automatiquement les fichiers plus anciens que`,ageDescription:`Minimum 7 jours, maximum 10 ans. Utilise la même règle d'ancienneté que le bouton Purger manuel.`,days:`jours`,includeNeverPrinted:`Inclure les fichiers jamais imprimés`,saveFailed:`Impossible d'enregistrer les paramètres de purge automatique.`},archivePurge:{headerButton:`Purger les anciens`,headerTooltip:`Suppression groupée d'anciennes archives`,title:`Purger les anciennes archives`,description:`Effacer l'ancien historique d'impression. Chaque archive vieillit selon sa dernière impression terminée — réimprimer une archive remet son âge à zéro, donc le travail actif n'est jamais purgé.`,ageLabel:`Supprimer les archives non imprimées depuis`,days:`jours`,effectsTitle:`Ce qui se passe lorsque vous cliquez sur Purger`,effect1:`Chaque archive correspondante est masquée des listes et ses fichiers sont retirés du disque (3MF, miniature, timelapse, 3MF source, F3D, photos).`,effect2:`La ligne d'archive reste en base pour que les statistiques rapides conservent la contribution en filament, temps, coût et énergie — même comportement que la suppression individuelle par défaut.`,effect3:`Cochez « Aussi retirer des statistiques » ci-dessous pour également supprimer la contribution des statistiques rapides (équivalent à l'option de la suppression individuelle). Ce chemin est irréversible.`,effect4:`Réimprimer une archive remet son compteur à zéro, les archives actives sont donc protégées.`,purgeStatsLabel:`Aussi retirer des statistiques`,purgeStatsHint:`Supprime les archives correspondantes des statistiques rapides (filament, temps, coût, énergie). Sans cette option, les statistiques conservent chaque contribution et seuls les fichiers quittent le disque.`,previewLoading:`Vérification du nombre d'archives correspondantes…`,previewFailed:`Impossible de prévisualiser la purge.`,previewSummary:`{{count}} archives · {{size}} seraient retirées`,andMore:`…et {{count}} de plus`,warning:`Les fichiers sont retirés du disque et ne peuvent pas être restaurés. Téléchargez ou marquez comme favori avant de continuer.`,confirmCta:`Retirer {{count}} archive(s)`,purging:`Retrait en cours…`,toast:{success:`{{count}} archive(s) retirée(s).`,failed:`Impossible de purger les archives.`}},archiveAutoPurge:{enableLabel:`Purger auto. les anciennes archives`,enableDescription:`Une fois par jour, masque des listes les archives non imprimées dans le seuil et retire leurs fichiers du disque. Réimprimer remet le compteur à zéro.`,ageLabel:`Suppression auto. des archives non imprimées depuis`,ageDescription:`Minimum 7 jours, maximum 10 ans. Basé sur la dernière impression terminée — réimprimer remet l'âge à zéro. Retire 3MF, miniature, timelapse, 3MF source, F3D et photos.`,days:`jours`,purgeStatsLabel:`Aussi retirer des statistiques`,purgeStatsDescription:`Lorsqu'activé, le nettoyage quotidien supprime aussi la contribution de chaque archive purgée des statistiques rapides (filament, temps, coût, énergie). Désactivé par défaut — les statistiques conservent la contribution et seuls les fichiers quittent le disque.`,runNow:`Purger les archives maintenant`,saveFailed:`Impossible d'enregistrer les paramètres de purge automatique.`},cameraTokens:{scope:{camera_stream:`Flux de caméra`,camwall:`Mur de caméras`,overlay:`Incrustation de streaming`},title:`Jetons API caméra`,navTitle:`Jetons API caméra`,description:`Jetons de longue durée pour intégrer le flux de caméra dans Home Assistant, Frigate, des écrans en mode kiosque ou tout autre outil nécessitant une adresse stable. La portée se choisit à la création ; un jeton peut être révoqué à tout moment.`,loading:`Chargement…`,confirmRevoke:{title:`Révoquer ce jeton ?`,body:`Tout appareil utilisant "{{name}}" perdra l'accès immédiatement. Action irréversible.`,cancel:`Annuler`,confirm:`Révoquer`},create:{scopeLabel:`Portée`,hintCameraStream:`Un jeton de flux de caméra ne peut récupérer que des flux et des instantanés. À utiliser pour Home Assistant, Frigate ou tout ce qui intègre une seule caméra.`,hintCamWall:`Un jeton Mur de caméras ouvre /camwall sur un écran sans connexion. Il voit le nom et l'état de chaque imprimante, ainsi que leurs flux de caméra. Il ne voit ni les noms de fichiers, ni les adresses, ni les codes d'accès.`,hintOverlay:`Un jeton Incrustation de streaming ouvre /overlay/{printerId} sur un écran sans connexion — pour OBS ou tout autre flux en direct. Il voit le flux de caméra d'une imprimante ainsi que son état d'impression en direct, y compris le nom de fichier affiché à l'écran. Il ne voit ni les adresses ni les codes d'accès.`,title:`Créer un nouveau jeton`,nameLabel:`Nom du jeton`,namePlaceholder:`par ex. Home Assistant`,daysLabel:`Jours avant expiration`,submit:`Créer`,hint:`Durée de vie maximale 365 jours. La valeur du jeton n'est affichée qu'une seule fois — copiez-la maintenant.`},created:{camWallUrlTitle:`Adresse du mur de caméras pour cet écran`,camWallUrlHint:`Ouvrez cette adresse sur l'écran. Quiconque peut lire l'adresse peut regarder le mur : traitez-la comme une clé. Révoquez le jeton pour couper l'écran.`,overlayUrlTitle:`Adresse d'incrustation pour OBS`,overlayUrlHint:`Ajoutez ceci comme Source navigateur dans OBS. Remplacez le numéro dans /overlay/1 par le numéro de votre imprimante (indiqué dans son adresse sur la page Imprimantes). Quiconque peut lire l'adresse peut regarder le flux : traitez-la comme une clé et révoquez le jeton pour couper l'accès.`,title:`Jeton créé – copiez-le maintenant`,warning:`C'est la seule fois où ce jeton sera visible. Après la fermeture de ce dialogue, vous ne pourrez plus jamais le voir.`,copy:`Copier`,dismiss:`Je l'ai enregistré`},list:{scope:`Portée`,myTitle:`Mes jetons`,allTitle:`Tous les utilisateurs (vue admin)`,empty:`Aucun jeton pour le moment.`,name:`Nom`,owner:`Propriétaire`,prefix:`Préfixe`,created:`Créé`,expires:`Expire`,lastUsed:`Dernière utilisation`,revoke:`Révoquer`,expired:`Expiré`},toast:{created:`Jeton créé`,createFailed:`Échec de la création du jeton`,revoked:`Jeton révoqué`,revokeFailed:`Échec de la révocation du jeton`,loadFailed:`Échec du chargement des jetons`,copied:`Copié dans le presse-papiers`,copyFailed:`Échec de la copie – sélectionnez et copiez manuellement`}},forecast:{title:`Prévision des stocks`,noSpools:`Aucune bobine active trouvée. Ajoutez des bobines à votre inventaire pour voir les données de prévision.`,noUsageData:`Aucune donnée d'utilisation disponible — impossible de projeter la chronologie des stocks.`,sku:`SKU`,material:`Matériau`,stock:`Stock`,dailyRate:`Cadence`,daysLeft:`Jours restants`,emptyBy:`Épuisé le`,reorderBy:`Réapprovisionner avant le`,actions:`Actions`,trend:`Tendance`,estimated:`Est.`,noData:`Aucune donnée`,timeframe:`Période`,chartTitle:`Prévision du stock — Top 5 matériaux`,dashedLinesROP:`Lignes pointillées = points de réapprovisionnement`,stockLevel:`Niveau de stock`,reorderPoint:`Point de réapprovisionnement`,safetyMargin:`Marge de sécurité`,trendLegend:`Tendance (basée sur l'historique, niveau de service 95 %)`,estimatedLegend:`Estimée (delta de poids)`,noDataLegend:`Aucune donnée`,ropLabel:`PR`,ssLabel:`SS`,safetyStockLegend:`Stock de sécurité`,stockArrivalLegend:`Arrivée du stock`,stockoutLegend:`Rupture de stock`,alertCount_one:`{{count}} alerte`,alertCount_other:`{{count}} alertes`,order:`Commander`,globalLeadTime:`Délai global`,globalLeadTimeHint:`Délai global minimum — utilisé dans le calcul du point de réapprovisionnement pour tous les SKUs`,save:`Enregistrer`,cancel:`Annuler`,settingsSaved:`Paramètres enregistrés`,failedSaveSettings:`Échec de l'enregistrement des paramètres`,globalLeadTimeSaved:`Délai global enregistré`,skuLeadTimeOverride:`Délai spécifique au SKU`,skuLeadTimeHint:`0 = utiliser le délai global. Définir >0 pour remplacer ce SKU.`,safetyMarginLabel:`Marge de sécurité`,effectiveLeadTime:`Délai effectif`,effectiveLeadTimeHint:`max(global {{global}}j, SKU {{sku}}j)`,reorderPointHint:`d̄ × LT + safety margin — commander quand le stock atteint ce niveau`,safetyMarginHint:`Stock de sécurité statistique (z=1,65 × σ × √LT) + tampon défini par l'utilisateur`,safetyMarginHintDays:`Tampon ajouté par-dessus le stock de sécurité statistique.{{approx}}`,safetyMarginHintDaysApprox:` ≈ {{g}}g au taux actuel.`,safetyMarginHintG:`Tampon de poids fixe ajouté par-dessus le stock de sécurité statistique.{{approx}}`,safetyMarginHintGApprox:` ≈ {{days}}j au taux actuel.`,individualSpools:`Bobines individuelles`,labelWeight:`Étiquette`,spoolCount_one:`{{count}} bobine`,spoolCount_other:`{{count}} bobines`,stockBreakRisk:`Risque de rupture de stock`,stockBreakBefore:`Rupture de stock avant réapprovisionnement`,stockBreakDetail:`{{days}}j restants, délai {{lt}}j.`,reorderNow:`Réapprovisionner maintenant`,reorderTriggerPassed:`La date de déclenchement {{date}} est passée.`,shoppingList:`Liste d'achats`,shoppingListItems_one:`({{count}} article)`,shoppingListItems_other:`({{count}} articles)`,shoppingListEmpty:`La liste d'achats est vide. Cliquez sur l'icône panier d'une ligne pour ajouter des articles.`,addToCart:`Ajouter à la liste d'achats`,alertsSnoozed:`Désactiver les alertes pour ce SKU`,alertsEnabled:`Activer les alertes pour ce SKU`,addedToCart:`Ajouté à la liste de courses`,failedAddItem:`Impossible d'ajouter l'article`,listView:`Liste`,logisticsView:`Logistique`,qty:`Qté`,weight:`Poids`,leadTime:`Délai`,expectedRestock:`Réapprovisionnement prévu`,status:`Statut`,note:`Note`,pending:`En attente`,purchased:`Commandé`,received:`Reçu`,markPurchased:`Marquer comme commandé`,markReceived:`Marquer comme reçu — ajoute les bobines au stock`,resetToPending:`Remettre en attente`,remove:`Supprimer`,clearAll:`Tout effacer`,downloadCsv:`CSV`,addToCartTitle:`Ajouter à la liste de courses`,byQuantity:`Par quantité`,byDuration:`Par durée`,numberOfSpools:`Nombre de bobines`,lastHowManyDays:`Combien de jours doit-il durer ?`,noUsageQty:`Pas de données d'utilisation — quantité définie à 1.`,noteOptional:`Note (optionnel)`,notePlaceholder:`ex. pour le projet X, urgent…`,addNSpools_one:`Ajouter {{count}} bobine`,addNSpools_other:`Ajouter {{count}} bobines`,onArrival:`À la livraison`,stockBreakIn:`Rupture de stock dans {{days}}j.`,stockRunsOutBefore:`Le stock s'épuise avant la fin du délai de {{lt}}j.`,atRate:`À {{rate}}g/jour, vous avez besoin de`,moreSpools_one:`{{count}} bobine supplémentaire`,moreSpools_other:`{{count}} bobines supplémentaires`,bridgeGap:`pour combler l'écart.`,noReadAccess:`Vous n'avez pas la permission de consulter les prévisions de stock.`,noWriteAccess:`Vous n'avez pas la permission de modifier les paramètres de prévision.`}}},ja:{translation:{nav:{printers:`プリンター`,archives:`アーカイブ`,queue:`印刷キュー`,stats:`統計`,profiles:`プロファイル`,maintenance:`メンテナンス`,projects:`プロジェクト`,inventory:`フィラメント`,finance:`ファイナンス`,files:`ファイル管理`,makerworld:`MakerWorld`,notifications:`通知`,settings:`設定`,system:`システム`,collapseSidebar:`サイドバーを閉じる`,expandSidebar:`サイドバーを開く`,update:`アップデート`,updateAvailable:`アップデートあり: v{{version}}`,updateAvailableBanner:`バージョン {{version}} が利用可能です！`,viewUpdate:`アップデートを表示`,viewOnGithub:`GitHubで表示`,keyboardShortcuts:`キーボードショートカット (?)`,switchToLight:`ライトモードに切替`,switchToDark:`ダークモードに切替`,switchToSystem:`システムモードに切替`,smartSwitches:`スマートスイッチ`,logout:`ログアウト`,installApp:`アプリをインストール`,installAppSuccess:`Bambuddyをインストールしました`},common:{plusNMore:`他{{count}}件`,save:`保存`,saving:`保存中...`,cancel:`キャンセル`,delete:`削除`,edit:`編集`,add:`追加`,close:`閉じる`,confirm:`確認`,loading:`読み込み中...`,error:`エラー`,errorLoading:`データの読み込みエラー`,retry:`再試行`,success:`成功`,warning:`警告`,enabled:`有効`,disabled:`無効`,yes:`はい`,no:`いいえ`,on:`オン`,off:`オフ`,all:`すべて`,none:`なし`,search:`検索`,filter:`フィルター`,sort:`並べ替え`,refresh:`更新`,download:`ダウンロード`,upload:`アップロード`,uploading:`アップロード中...`,uploadFailed:`アップロード失敗`,actions:`操作`,status:`ステータス`,name:`名前`,description:`説明`,date:`日付`,time:`時間`,hours:`時間`,minutes:`分`,seconds:`秒`,days:`日`,enable:`有効化`,disable:`無効にする`,permissions:`権限`,noPrinters:`プリンターが登録されていません`,noData:`データがありません`,linkNotFound:`リンクが見つかりません`,required:`必須`,optional:`オプション`,dismiss:`閉じる`,apply:`適用`,reset:`リセット`,export:`エクスポート`,import:`インポート`,clear:`クリア`,selectAll:`すべて選択`,deselectAll:`すべて選択解除`,noChange:`— 変更なし —`,unchanged:`変更なし`,unassigned:`未割当`,unknown:`不明`,unknownError:`不明なエラー`,today:`今日`,tomorrow:`明日`,asap:`即時`,overdue:`期限超過`,now:`今すぐ`,collapse:`折りたたむ`,expand:`展開`,previous:`前へ`,next:`次へ`,viewArchive:`アーカイブを表示`,viewInFileManager:`ファイルマネージャーで表示`,addedBy:`{{username}}が追加`,prints:`プリント`,more:`+{{count}}件`,ascending:`昇順`,descending:`降順`,back:`戻る`,copy:`コピー`,copied:`コピーしました!`,printer:`プリンター`,remove:`削除`,type:`種類`,print:`印刷`,rename:`名前変更`,move:`移動`,create:`作成`,duplicate:`複製`,left:`左`,right:`右`,user:`ユーザー`,run:`実行`,running:`実行中...`},finance:{allTypes:`すべてのタイプ`,allCostCenters:`すべてのコストセンター`,title:`ファイナンス`,subtitle:`ウォレット、個人トランザクション、およびコストセンター`,noAccess:`財務データを表示する権限がありません。`,personalView:`個人ビュー`,adminView:`管理者ビュー`,createCostCenter:`コストセンターを作成`,adjustWallet:`ウォレットを調整`,addManualPrint:`手動プリントを追加`,manageMembers:`コストセンターメンバーを管理`,currentBalance:`個人残高`,transactions:`トランザクション`,personalTransactions:`個人トランザクション`,costCenters:`コストセンター`,availableForPrinting:`プリント割り当てが可能`,costCenterName:`名前`,budgetType:`予算タイプ`,monthlyBudget:`月間予算`,totalBudget:`総予算`,noBudget:`予算なし`,create:`作成`,selectUser:`ユーザーを選択`,transactionType:`タイプ`,amount:`金額`,noCostCenter:`コストセンターなし`,descriptionOptional:`説明（オプション）`,applyAdjustment:`調整を適用`,memberCanPrint:`メンバーはプリント可能`,addMember:`メンバーを追加`,canPrint:`プリント可能`,noMembers:`割り当てられたメンバーはありません。`,editCostCenter:`コストセンターを編集`,myCostCenters:`マイコストセンター`,costCentersHint:`予算限度額を確認し、コストを管理下に置きます`,noCostCenters:`コストセンターが見つかりません。`,owner:`所有者`,balance:`口座残高`,unlimited:`無制限`,budgetPolicyHint:`口座残高はコストの記録に使用されます。印刷は選択したコストセンターの予算によってのみ制限され、予算がなければ無制限です。`,budget:`予算`,shared:`共有`,cannotEditPrivateCostCenter:`プライベートコストセンターはここで編集できません`,recentTransactions:`最近のトランザクション`,transactionsHint:`タイプとコストセンターでフィルタリングしてから、ページを移動します`,first:`最初`,prev:`前へ`,next:`次へ`,last:`最後`,pageNumberOf:`ページ {{page}} / {{total}}`,noTransactions:`利用可能なトランザクションはありません。`,noTransactionsForFilter:`選択したフィルターに一致するトランザクションはありません。`,costCenter:`コストセンター`,balanceAfter:`調整後残高`,userWithId:`ユーザー #{{id}}`,partial:`部分`,editTransaction:`トランザクションを編集`,selectCostCenter:`コストセンターを選択...`,costCenterRequired:`コストセンターを選択してください`,amountExample:`例：4.00`,manualAdjustmentExample:`例：手動調整`,userRequired:`ユーザーを選択してください`,amountInvalid:`金額は有効な数値である必要があります`,createdCostCenter:`コストセンターが作成されました`,createCostCenterFailed:`コストセンターの作成に失敗しました`,transactionDeleted:`トランザクションが削除されました`,deleteTransactionFailed:`トランザクションの削除に失敗しました`,transactionEdited:`トランザクションが更新され、レジャーが再計算されました`,editTransactionFailed:`トランザクションの編集に失敗しました`,manualPrintCreated:`手動プリント料金が追加され、レジャーが再計算されました`,manualPrintFailed:`手動プリントの作成に失敗しました`,memberSaved:`メンバーが保存されました`,memberSaveFailed:`メンバーの保存に失敗しました`,memberRemoved:`メンバーが削除されました`,memberRemoveFailed:`メンバーの削除に失敗しました`,costCenterNameRequired:`コストセンター名は必須です`,costCenterUpdated:`コストセンターが更新されました`,costCenterUpdateFailed:`コストセンターの更新に失敗しました`,confirmDeleteCostCenter:`コストセンター "{{name}}" を削除しますか？`,costCenterDeleted:`コストセンターが削除されました`,costCenterDeleteFailed:`コストセンターの削除に失敗しました`,deleteTransactionConfirm:`このトランザクションを削除しますか？残高は自動的に再計算されます。`,deposit:`預金`,withdraw:`引き出し`,printCharge:`プリント料金`,deleteTransaction:`トランザクションを削除`},printers:{addPreflight:{checking:`接続を確認しています...`,warning:`一部の接続チェックに失敗しました。このプリンターはオフラインと表示される可能性があります。下のチェックを確認し、可能な範囲で修正するか、そのまま保存してください。`,back:`戻る`,saveAnyway:`そのまま保存`},title:`プリンター`,addPrinter:`プリンターを追加`,editPrinter:`プリンターを編集`,deletePrinter:`プリンターを削除`,printerName:`プリンター名`,serialNumber:`シリアル番号`,ipAddress:`IPアドレス / ホスト名`,accessCode:`アクセスコード`,model:`モデル`,nozzleCount:`ノズル数`,autoArchive:`自動アーカイブ`,status:{available:`利用可能`,idle:`待機中`,printing:`印刷中`,paused:`一時停止`,offline:`オフライン`,problem:`問題`,error:`エラー`,finished:`完了`,unknown:`不明`},temperatures:{nozzle:`ノズル`,bed:`ベッド`,chamber:`チャンバー`},heaterHistory:{title:`ヒーター履歴`,openLabel:`ヒーター履歴を表示`,nozzle:`ノズル`,nozzle2:`ノズル 2`,bed:`ベッド`,chamber:`チャンバー`,error:`履歴を読み込めませんでした`,empty:`まだデータが記録されていません`},progress:`{{percent}}% 完了`,timeRemaining:`残り {{time}}`,deleteConfirm:`「{{name}}」を削除しますか？`,maintenanceOk:`メンテナンス正常`,maintenanceWarning:`{{count}}件の警告`,maintenanceWarning_plural:`{{count}}件の警告`,maintenanceDue:`{{count}}件のメンテナンス期限`,maintenanceDue_plural:`{{count}}件の期限`,sort:{name:`名前`,status:`ステータス`,model:`モデル`,location:`ロケーション`,eta:`残り時間`,ascending:`昇順で並べ替え`,descending:`降順で並べ替え`},cardSize:{small:`小`,medium:`中`,large:`大`,extraLarge:`特大`},pageView:{openCamWallPage:`カメラウォールをページとして開く`,cards:`カード`,camWall:`カメラウォール`},camWall:{page:{tokenRejected:`このカメラウォールのリンクは無効です。トークンの有効期限が切れたか、取り消された可能性があります。`,loadFailed:`プリンターを読み込めませんでした。`},noPrinters:`表示するプリンターがありません`,noSignal:`信号なし`,live:`ライブ`,snap:`スナップ`,off:`オフ`,summary:`ライブ {{live}}件、スナップ {{snap}}件、合計 {{total}}件`,layer:`レイヤー {{cur}}/{{total}}`,timeLeft:`残り {{time}}`,statusMode:{off:`オフ`,compact:`コンパクト`,full:`フル`},settings:{title:`カメラウォール設定`,maxLive:`最大ライブ配信数`,maxLiveHint:`同時にライブ配信するタイル数。残りはスナップショットとして更新されます。`,snapshotInterval:`スナップショット間隔（秒）`,snapshotIntervalHint:`非ライブのタイルが新しいスナップショットを取得する頻度。`,statusOverlay:`ステータス表示`,statusOverlayHint:`コンパクト：状態バッジのみ。フル：＋進捗・レイヤー・残り時間。`}},hideOffline:`オフラインを非表示`,nextAvailable:`次に完了`,powerOn:`電源オン`,offlinePrintersWithPlugs:`スマートプラグ付きオフラインプリンター`,noPrintersConfigured:`プリンターが設定されていません`,search:`プリンターを検索...`,noSearchResults:`検索またはフィルターに一致するプリンターがありません`,filter:{allStatuses:`すべてのステータス`,allLocations:`すべての場所`},toolbar:{filters:`フィルター`,view:`表示`,actions:`操作`},readyToPrint:`印刷可能`,external:`外部`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`印刷アーカイブを削除`,noLabel:`ラベルなし`,printPreview:`印刷プレビュー`,width:`幅`,height:`高さ`,noObjectsFound:`オブジェクトが見つかりません`,objectsLoadedOnPrintStart:`オブジェクトは印刷開始時に読み込まれます`,willBeSkipped:`スキップされます`,name:`名前`,serialCannotBeChanged:`シリアル番号は変更できません`,locationHelp:`プリンターのグループ化とキュージョブのフィルタリングに使用`,wifiSignal:{veryWeak:`非常に弱い`,weak:`弱い`,fair:`注意`,good:`良好`,excellent:`非常に良い`},maintenanceUpToDate:`すべてのメンテナンスが最新です`,maintenance:{title:`メンテナンス中`,subtitle:`このプリンターは一時停止中です — 未接続、キュー対象外、通知も送信されません。`,pillLabel:`メンテナンス`,exitButton:`メンテナンスを終了`,menuEnter:`メンテナンスモードに入る`,menuExit:`メンテナンスモードを終了`,toastEntered:`{{name}} はメンテナンスモードになりました`,toastExited:`{{name}} がオンラインに戻りました`,confirmMidPrintTitle:`印刷中にメンテナンスモードに入りますか？`,confirmMidPrintMessage:`{{name}} は現在印刷中です。メンテナンスモードに入るとMQTTが切断され、このジョブの進行状況の追跡と完了通知が停止します。続行しますか？`,editFieldLabel:`メンテナンスモード`,editFieldHelp:`有効にすると、このプリンターはMQTT、キューディスパッチ、通知から一時停止されます — 修理、並列のBambuddyインストール、または一時的な停止に役立ちます。`},chamberLightOn:`チャンバーライトをオンにしました`,chamberLightOff:`チャンバーライトをオフにしました`,files:`ファイル`,browseFiles:`プリンターのファイルを参照`,autoOffAfterPrint:`印刷後に自動電源オフ`,autoOffExecuted:`自動オフが実行されました - リセットするにはプリンターの電源を入れてください`,hmsErrors:`クリックしてHMSエラーを表示`,viewHmsErrors:`{{count}}件のHMSエラーを表示`,resume:`再開`,pause:`一時停止`,stop:`停止`,camera:`カメラ`,skipObject:`オブジェクトスキップ`,reconnect:`再接続`,forceRefresh:`強制更新`,forceRefreshSuccess:`更新をリクエストしました`,mqttDebug:`MQTTデバッグ`,printerInformation:`プリンター情報`,copyToClipboard:`コピー`,copied:`コピーしました！`,state:`状態`,wifiSignalLabel:`WiFi信号`,developerMode:`開発者モード`,enabled:`有効`,disabled:`無効`,addedOn:`追加日`,sdCard:`SDカード`,inserted:`挿入済み`,notInserted:`未挿入`,totalPrintHours:`印刷時間`,activeNozzle:`アクティブ: {{nozzle}}ノズル`,amsSwitchInletTooltip:`フィラメント経路切替器 IN-{{inlet}}（{{side}}）— 両方のノズルに供給できます`,nozzleRack:`ノズルラック`,nozzleDocked:`ドッキング中`,nozzleMounted:`マウント中`,nozzleActive:`アクティブ`,nozzleIdle:`アイドル`,nozzleDiameter:`直径`,nozzleType:`タイプ`,nozzleStatus:`ステータス`,nozzleFilament:`フィラメント`,nozzleWear:`摩耗`,nozzleMaxTemp:`最高温度`,nozzleSerial:`シリアル`,nozzleHardenedSteel:`焼入れ鋼`,nozzleStainlessSteel:`ステンレス鋼`,nozzleTungstenCarbide:`タングステンカーバイド`,nozzleFlow:`フロー`,nozzleHighFlow:`ハイフロー`,nozzleStandardFlow:`スタンダード`,firmwareUpdate:`ファームウェアアップデート`,firmwareInstructions:`プリンターのタッチスクリーンで`,firmwareNav:`に移動`,settings:`設定`,firmware:`ファームウェア`,discoverPrinters:`プリンターを検出`,searching:`検索中...`,manualEntry:`手動入力`,addFromCloud:`クラウドから追加`,toast:{printerDeleted:`プリンターを削除しました`,missingSpoolAssignment:`{{printer}}で印刷を開始しました。以下のスプール割り当てがありません: {{slots}}`,killSwitchTriggered:`課金キルスイッチが{{printer}}で未承認の印刷を停止しました：{{filename}}`,billingChargeFailed:`{{printer}} の {{filename}} を課金できませんでした。予算予約は保持されています。サーバーログを確認してください。`,assignmentVerified:`スロット{{slot}}にフィラメントを読み込みました（{{printer}}）`,assignmentVerifiedNoKprofile:`{{printer}}のスロット{{slot}}を読み込みましたが、フロー校正プロファイル（Kプロファイル）は適用されませんでした`,assignmentNotConfirmed:`{{printer}}のスロット{{slot}}の割り当てを確認できませんでした。AMSスロットを確認してください`,printerAdded:`プリンターを追加しました`,printerUpdated:`プリンターを更新しました`,failedToDelete:`プリンターの削除に失敗しました`,failedToAdd:`プリンターの追加に失敗しました`,connectionFailedNotAdded:`プリンターに接続できませんでした。IPアドレス、シリアル番号、アクセスコードを確認し、LAN専用モードが有効になっていることを確認してください。プリンターは追加されていません。`,failedToUpdate:`プリンターの更新に失敗しました`,commandSent:`コマンドを送信しました`,failedToSendCommand:`コマンドの送信に失敗しました`,turnedOn:`{{name}} の電源をオンにしました`,failedToPowerOn:`{{name}} の電源オンに失敗しました`,scriptTriggered:`スクリプトを実行しました`,printStopped:`印刷を停止しました`,printPaused:`印刷を一時停止しました`,printResumed:`印刷を再開しました`,referenceDeleted:`リファレンスを削除しました`,detectionAreaSaved:`検出エリアを保存しました`,failedToRunScript:`スクリプトの実行に失敗しました`,failedToStopPrint:`印刷の停止に失敗しました`,failedToPausePrint:`印刷の一時停止に失敗しました`,failedToResumePrint:`印刷の再開に失敗しました`,failedToControlChamberLight:`チャンバーライトの制御に失敗しました`,failedToSetSpeed:`印刷速度の設定に失敗しました`,failedToUpdateSetting:`設定の更新に失敗しました`,failedToSkipObjects:`オブジェクトのスキップに失敗しました`,failedToRereadRfid:`RFIDの再読み取りに失敗しました`,failedToCheckPlate:`プレートの確認に失敗しました`,failedToUpdateLabel:`ラベルの更新に失敗しました`,failedToDeleteReference:`リファレンスの削除に失敗しました`,failedToSaveDetectionArea:`検出エリアの保存に失敗しました`,plateCheckEnabled:`プレートチェックを有効にしました`,plateCheckDisabled:`プレートチェックを無効にしました`,calibrationSaved:`キャリブレーションを保存しました！`,calibrationFailed:`キャリブレーションに失敗しました`,rfidRereadInitiated:`RFID再読み取りを開始しました`,loadInitiated:`フィラメントをロード中…`,unloadInitiated:`フィラメントをアンロード中…`,failedToLoad:`フィラメントのロードに失敗`,failedToUnload:`フィラメントのアンロードに失敗`},connection:{connected:`接続中`,offline:`オフライン`},plateStatus:{markCleared:`プレートをクリア済みにする`,cleared:`プレートクリア済み`,notCleared:`プレート未クリア`,inUse:`プレート使用中`},queue:{inQueue:`キュー内 {{count}} 件`,inQueue_plural:`{{count}}件がキュー内`},controls:`コントロール`,rfid:{reread:`RFID再読み取り`},ams:{load:`ロード`,unload:`アンロード`,feedTitle:`{{slot}} をどちらのノズルにロードしますか？`,feedPrompt:`Filament Track Switch はこのスロットをどちらのホットエンドにも送れます。送り先を選択してください。`,feedLeft:`左ノズル`,feedRight:`右ノズル`,feedAlreadyLoaded:`ロード済み`,switchNotReady:`Filament Track Switch がまだ設定されていません。プリンター側で各 AMS を入口に割り当ててから、もう一度お試しください。`},bedJog:{limitWarning:`手動移動では可動範囲の制限が適用されません。Bambu のファームウェアの不具合により、リモートコマンドではソフトウェアリミットが無視されます。衝突しないよう注意して操作してください。`,title:`ジョグ操作`,bed:`ベッド`,step:`ステップ (mm)`,up:`プレートを上へ`,down:`プレートを下へ`,toolheadUp:`ツールヘッドを上へ`,toolheadDown:`ツールヘッドを下へ`,disabledWhilePrinting:`印刷中は無効`,notHomedTitle:`プリンターがホーミングされていません`,notHomedMessage:`前回の印刷以降、プリンターがホーミングされていません。安全な位置決めのためにまずオートホーミングを実行するか（ツールヘッドをパークしてからX・Y・Zをホーミングします）、このまま移動してください — ソフトエンドストップはバイパスされます。`,homeZ:`オートホーミング`,moveAnyway:`このまま移動`,homingStarted:`プリンターをオートホーミング中…`},permission:{noAdd:`プリンターを追加する権限がありません`,noEdit:`プリンターを編集する権限がありません`,noDelete:`プリンターを削除する権限がありません`,noControl:`プリンターを制御する権限がありません`,noFiles:`このディレクトリにファイルがありません`,noAmsRfid:`AMS RFIDを再読み取りする権限がありません`,noSmartPlugControl:`スマートプラグを制御する権限がありません`,noCamera:`カメラを表示する権限がありません`},modal:{addTitle:`プリンターを追加`,editTitle:`プリンターを編集`,myPrinter:`マイプリンター`,selectModel:`モデルを選択...`,locationGroup:`ロケーション / グループ`,locationPlaceholder:`例: 工房、オフィス、地下室`,autoArchiveLabel:`完了した印刷を自動アーカイブ`,fromPrinterSettings:`プリンターの設定から取得`,modelOptional:`モデル（任意）`,saveChanges:`変更を保存`},skipObjects:{tooltip:`オブジェクトスキップ`,onlyWhilePrinting:`オブジェクトスキップ（印刷中のみ）`,requiresMultiple:`オブジェクトスキップ（2個以上必要）`,title:`オブジェクトスキップ`,matchIdsInfo:`プリンター画面のIDと照合してください`,printerShowsIds:`プリンター画面にビルドプレート上のオブジェクトIDが表示されます`,skipSelected:`選択をスキップ`,skipping:`スキップ中...`,noObjectsSelected:`オブジェクトが選択されていません`,selectObjectsToSkip:`現在の印刷からスキップするオブジェクトを選択してください`,skipped:`スキップ済み`,objectsSkipped:`オブジェクトをスキップしました`,activeCount:`{{count}}個アクティブ`,waitForLayer:`オブジェクトをスキップするにはレイヤー2以降をお待ちください（現在レイヤー{{layer}}）`,skip:`スキップ`,confirmTitle:`オブジェクトをスキップしますか？`,confirmMessage:`「{{name}}」をスキップしますか？この操作は元に戻せません。`,confirmAllMessage:`残りのオブジェクトがすべて選択されています。印刷ジョブは停止します。続行しますか？`,confirmMultipleMessage:`選択した{{count}}個のオブジェクトをスキップしますか？この操作は元に戻せません。`},confirm:{deleteTitle:`プリンターを削除`,deleteMessage:`「{{name}}」を削除しますか？すべての接続設定が削除されます。`,deleteArchivesNote:`このプリンターのすべての印刷履歴が完全に削除されます。`,keepArchivesNote:`印刷履歴は保持されますが、このプリンターとの関連は解除されます。`,stopTitle:`印刷を停止`,stopMessage:`「{{name}}」の現在の印刷を停止しますか？印刷ジョブがキャンセルされます。`,stopButton:`印刷を停止`,pauseTitle:`印刷を一時停止`,pauseMessage:`「{{name}}」の現在の印刷を一時停止しますか？`,pauseButton:`印刷を一時停止`,resumeTitle:`印刷を再開`,resumeMessage:`「{{name}}」の印刷を再開しますか？`,resumeButton:`印刷を再開`,powerOnTitle:`プリンターの電源をオン`,powerOnMessage:`「{{name}}」の電源をオンにしますか？`,powerOnButton:`電源オン`,powerOffTitle:`プリンターの電源をオフ`,powerOffMessage:`「{{name}}」の電源をオフにしますか？`,powerOffWarning:`警告: 「{{name}}」は現在印刷中です！電源をオフにしますか？印刷が中断され、プリンターが損傷する可能性があります。`,powerOffButton:`電源オフ`,haToggleTitle:`「{{name}}」を切り替え`,haToggleMessage:`Home Assistant エンティティ {{entity}} を切り替えますか？現在オンの場合、電源がオフになる可能性があります。`,haToggleWarning:`警告: 「{{name}}」は現在印刷中です！{{entity}} を切り替えると電源が切れ、印刷が中断される可能性があります。続行しますか？`,haToggleButton:`切り替え`},bulk:{select:`選択`,selectAll:`すべて選択`,selectByLocation:`場所で選択`,selected:`{{count}}件選択中`,actions:{stop:`停止`,pause:`一時停止`,resume:`再開`,clearPlate:`ベッドをクリア`,clearHMS:`通知をクリア`},confirm:{stopTitle:`{{count}}件の印刷を停止`,stopMessage:`{{count}}台のプリンターのアクティブな印刷をキャンセルします。この操作は元に戻せません。`,stopButton:`すべて停止`,pauseTitle:`{{count}}件の印刷を一時停止`,pauseMessage:`{{count}}台のプリンターのアクティブな印刷を一時停止します。`,pauseButton:`すべて一時停止`,clearPlateTitle:`{{count}}台のプリントベッドをクリア`,clearPlateMessage:`{{count}}台のプリンターのプリントベッドをクリアし、キュー内のジョブが開始される場合があります。`,clearPlateButton:`すべてクリア`},success:`{{count}}台のプリンターで{{action}}が完了`,partial:`{{succeeded}}件成功、{{failed}}件失敗`,noneApplicable:`選択したプリンターにこのアクションに適した状態のものがありません`,selectByState:`ステータスで選択`},discovery:{title:`プリンター`,searching:`検索中...`,scanning:`スキャン中...`,scanProgress:`スキャン中... {{scanned}}/{{total}}`,foundPrinters:`{{count}}台のプリンターを検出`,noPrintersFound:`プリンターが見つかりません`,noPrintersFoundSubnet:`指定されたサブネットにプリンターが見つかりません。`,noPrintersFoundNetwork:`ネットワーク上にプリンターが見つかりません。`,allConfigured:`検出されたすべてのプリンターは既に設定済みです。`,alreadyAdded:`追加済み`,select:`選択`,manualEntry:`手動入力`,addFromCloud:`クラウドから追加`,subnetToScan:`スキャンするサブネット`,dockerNote:`Dockerを検出しました。プリンターのサブネットをCIDR表記で入力してください。docker-compose.ymlでnetwork_mode: hostが必要です。`,scanSubnet:`サブネットをスキャンしてプリンターを検出`,discoverNetwork:`ネットワーク上のプリンターを検出`,scanningSubnet:`サブネットでBambuプリンターをスキャン中...`,scanningNetwork:`ネットワークをスキャン中...`,serialRequired:`シリアル番号が必要です`,unknown:`不明`,failedToStart:`印刷の開始に失敗しました`,customSubnetOption:`カスタムサブネット...`,customSubnetLabel:`カスタムサブネット (CIDR)`,customSubnetNote:`プリンターがこのサーバーと別のネットワークにある場合は、カスタムサブネットを使用してください。FTP (990) と MQTT (8883) のポートが、ルーティング境界を越えて到達可能である必要があります。`},drying:{start:`乾燥開始`,stop:`乾燥停止`,temperature:`温度`,duration:`時間`,hours:`時間`,timeRemaining:`残り {{time}}`,active:`乾燥中`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`乾燥非対応`,powerRequired:`AMS電源アダプターを接続して乾燥を有効にしてください`,cannotDryNow:`AMSは現在乾燥を開始できません`,startingDrying:`乾燥を開始しています...`,toastCommandSent:`乾燥コマンドを送信しました`,toastStopped:`乾燥を停止しました`,toastNotStarted:`プリンターはコマンドを受け付けましたが、AMS は乾燥を開始しませんでした。AMS の電源アダプターが接続されているか、プリンターがアイドル状態かを確認してください。`,screenOnly:`このプリンターでは、AMS の乾燥はプリンター本体の画面からのみ操作できます (Bambu の仕様上の制限)`,stoppingDrying:`乾燥を停止しています...`,rotateTray:`乾燥中にスプールを回転`,rotateUnavailableReason:`利用不可 — このAMSのスロットがツールヘッドにロードされています。スプールが供給チューブで固定されているため回転できません。先にフィラメントを引き戻してください。`,startMode:`開始時刻`,modeNow:`今すぐ`,modeDelay:`時間経過後`,modeAtTime:`時刻指定`,schedule:`予約する`,scheduledFor:`乾燥予約: {{time}}`,scheduledAsap:`乾燥予約済み（プリンター待ち）`,cancelScheduled:`乾燥予約をキャンセル`,scheduleFailed:`乾燥の予約に失敗しました`,retractFilament:`AMS出口のフィラメントを引き戻すと乾燥を開始できます`,waitingAmsNotFound:`AMSの検出待ち`,waitingOffline:`プリンターのオンライン復帰待ち`,waitingPrinterBusy:`プリンターが空くのを待機中`,waitingAlreadyDrying:`実行中の乾燥サイクルの終了待ち`,waitingInterrupted:`中断されました。プリンターが空き次第、再開します`,scheduleFailedReason:`予約した乾燥に失敗しました: {{reason}}`,scheduleFailedUnknown:`不明なエラー`,dismissFailed:`閉じる`},amsBackup:{titleOn:`AMSフィラメントバックアップはONです。クリックして無効化します。`,titleOff:`AMSフィラメントバックアップはOFFです。クリックして有効化します。`,titleUnknown:`このプリンタではAMSフィラメントバックアップ状態を確認できません。`,toastEnabled:`AMSフィラメントバックアップを有効化しました`,toastDisabled:`AMSフィラメントバックアップを無効化しました`,modalTitle:`AMS フィラメントバックアップ`,modalHelp:`アクティブなスロットが空になると、プリンターは同じプリセット・同じ色のスロットをこの順序で循環します。`,modalNoSlots:`フィラメントが読み込まれていません。`,modalNoPairs:`バックアップペアがありません — プリセットと色の両方が一致するスロットがありません。`,extruderRightShort:`右`,extruderLeftShort:`左`,stateOn:`有効`,stateOff:`無効`,stateUnknown:`このプリンターでは未対応`},activeJobSlot:{title:`このスロットはアクティブな印刷のフィラメント {{n}} です`,ariaLabel:`アクティブ印刷スロット {{n}}`},expectedSlot:{title:`プリンターはこのスロットのフィラメントを待っています`,ariaLabel:`要求スロット {{n}}`,label:`{{ams}} · スロット {{slot}}`,external:`外部スプール`},filaments:`フィラメント`,externalSpool:{hide:`外部スプールを非表示にする`,show:`外部スプールを表示する`},openCameraOverlay:`カメラオーバーレイを開く`,openCameraWindow:`カメラを新しいウィンドウで開く`,firmwareUpdateAvailable:`ファームウェアアップデートあり: {{current}} → {{latest}}`,firmwareUpToDate:`ファームウェア {{version}} — 最新`,firmwareUpdateButton:`アップデート`,plateDetection:{noPermission:`このページにアクセスする権限がありません。`,enabledClick:`プレートチェック有効 - クリックして無効化`,disabledClick:`プレートチェック無効 - クリックして有効化`,manageCalibration:`プレート検出キャリブレーションを管理`,calibrationRequired:`キャリブレーションが必要です`,calibrationInstructions:`ビルドプレートが<strong>完全に空</strong>であることを確認してから、キャリブレーションをクリックしてください。`,calibrationDescription:`キャリブレーションは空のプレートのリファレンス画像を撮影します。以降のチェックではこのリファレンスと比較してオブジェクトを検出します。`,calibrationTip:`<strong>ヒント:</strong> 異なるプレート用に最大5つのキャリブレーションを保存できます。チェック時に最適なものが自動的に使用されます。`,plateEmpty:`プレートは空のようです`,objectsDetected:`オブジェクトを検出しました`,confidence:`信頼度`,difference:`差分`,analysisPreview:`分析プレビュー:`,analysisLegend:`緑の枠 = 検出エリア、赤のオーバーレイ = キャリブレーションとの差分`,savedReferences:`保存済みリファレンス ({{count}}/{{max}})`,deleteReference:`リファレンスを削除`,labelPlaceholder:`ラベル...`,clickToEdit:`{{label}} - クリックして編集`,clickToAddLabel:`クリックしてラベルを追加`},speed:{title:`印刷速度`,silent:`サイレント (50%)`,standard:`スタンダード (100%)`,sport:`スポーツ (124%)`,ludicrous:`ルディクラス (166%)`},airduct:{title:`エアダクトモード`,cooling:`冷却`,heating:`加熱`},noSdCard:`SDなし`,door:{open:`開`,closed:`閉`},fans:{partCooling:`パーツ冷却ファン`,auxiliary:`補助ファン`,leftAuxiliary:`左補助ファン`,exhaust:`排気`,chamber:`チャンバーファン`},clickToViewHmsErrors:`クリックしてHMSエラーを表示`,aiDetection:{safe:`安全`,warning:`警告`,failure:`失敗`,idle:`待機中`,error:`確認していません`,unknown:`開始中`,tooltipError:`AI 失敗検出はこの印刷を確認していません: {{reason}} - クリックで詳細を表示`,tooltipUnknown:`AI 失敗検出: 最初の結果を待機中 - クリックで詳細を表示`,errorHint:`この印刷は確認されていません。下記の問題が解決されると、検出は自動的に再開されます。`,tooltip:`AI 失敗検出: {{status}}（スコア {{score}}）- クリックで詳細を表示`,tooltipIdle:`AI 失敗検出が有効 - 次の印刷から監視を開始します - クリックで詳細を表示`,modalTitle:`AI 失敗検出 - {{name}}`,currentStatus:`ステータス`,score:`スコア`,framesAnalyzed:`解析フレーム数`,idleHint:`現在監視中の印刷はありません。次の印刷から自動的に監視を開始します。`,lastError:`最後のエラー`,openSettings:`設定を開く`},estimatedCompletion:`完了予定時刻`,plateNumber:`プレート {{number}}`,slotOptions:`スロットオプション`,amsPopup:{friendlyName:`AMS名`,friendlyNamePlaceholder:`例: AMS フレンドリー名`,serialNumber:`シリアル番号`,firmwareVersion:`ファームウェア`,save:`保存`,clear:`クリア`,noEditPermission:`AMS ユニットの名前を変更する権限がありません`},firmwareModal:{title:`ファームウェアアップデート`,titleUpToDate:`ファームウェア情報`,currentVersion:`現在のバージョン`,latestVersion:`最新バージョン`,releaseNotes:`リリースノート`,checkingPrereqs:`前提条件を確認中...`,sdCardReady:`SDカード準備完了。下をクリックしてファームウェアをアップロードしてください。`,uploadedSuccess:`ファームウェアをSDカードにアップロードしました！`,applyInstructions:`プリンターでアップデートを適用するには:`,step1:`プリンターのタッチスクリーンで設定に移動`,step2:`ファームウェアに移動`,step3:`SDカードからアップデートを選択`,step4:`アップデートには10〜20分かかります`,done:`完了`,starting:`開始中...`,uploadFirmware:`ファームウェアをアップロード`,uploadFailed:`アップロード開始に失敗しました: {{error}}`,uploadedToast:`ファームウェアをアップロードしました！プリンター画面からアップデートを実行してください。`,availableVersions:`利用可能なバージョン`,usable:`利用可`,unavailable:`利用不可`,installed:`インストール済み`,newerBadge:`新しい`,olderBadge:`古い`,currentBadge:`現在`},accessCodePlaceholder:`プリンター設定から取得`,roi:{title:`プリンター`,xStart:`X開始`,yStart:`Y開始`,width:`幅`,height:`高さ`,instruction:`ビルドプレートに焦点を合わせるように検出エリアを調整してください。プレビューの緑の枠が現在のエリアを示しています。`},developerModeWarning:`開発者LANモードが有効になっていません: {{names}}。一部の機能が動作しない可能性があります。`,howToEnable:`有効化方法`,incompatibleFile:`このファイルは{{slicedFor}}用にスライスされていますが、このプリンターは{{printerModel}}です`,dropNotPrintable:`.gcodeおよび.gcode.3mfファイルのみ印刷できます`,dropToPrint:`ドロップして印刷`,dropToQueue:`ドロップしてキューに追加`},archives:{media:{title:`印刷動画`,download:`印刷動画をダウンロード`,searching:`プリンター上の動画を確認しています…`,searchFailed:`プリンター上の動画を確認できませんでした。`,none:`この印刷のタイムラプスまたは IP カメラの動画断片は見つかりませんでした。`,attachedTimelapse:`添付済みタイムラプス`,printerFiles:`プリンターに残っているファイル`,downloadSelected:`選択項目をダウンロード`,printerMissing:`プリンターは設定から削除されています`,timelapseUnavailable:`タイムラプスディレクトリを読み取れませんでした`,ipcamUnavailable:`IP カメラディレクトリを読み取れませんでした`},title:`印刷アーカイブ`,no3mfBanner:{title:`最近の一部の印刷でサムネイル付きのアーカイブができませんでした`,body:`スライサーがプリンターのSDカードに.gcode.3mfファイルを残さなかったため、Bambuddyはサムネイルもスライサーメタデータも取得できませんでした。これは通常、スライサー (Bambu Studio / OrcaSlicer のデバイスタブ) で「送信ファイルを外部ストレージに保存」がオフになっていることが原因です。`,docsLink:`インストール手順4を参照`,docsLinkInternalStorage:`原因について`,titleInternalStorage:`最近の一部の印刷はプリンターの内部ストレージに残りました`,bodyInternalStorage:`Bambu Studio がスライス済みファイルをカードではなくプリンターの内部ストレージに保存したため、Bambuddy が FTP で読み取れるものがありませんでした。H2 シリーズ、P2S、X2D では「印刷」ボタンは常にそうなり、選択できるのは「送信」だけで、そちらも既定は「キャッシュ」です。これらの印刷は名前と時間付きでアーカイブされますが、サムネイルとスライサーのメタデータはありません。完全なアーカイブを残すには、Bambuddy から印刷を開始するか、OrcaSlicer でスライスしてください。Bambu Studio を使う場合は「送信」で「外部ストレージ」を選び、その後に印刷を開始します。いずれもプリンターにカードまたは USB メモリーが必要です。`,titleNoExternalStorage:`最近の一部の印刷をアーカイブできませんでした — プリンターにストレージがありません`,bodyNoExternalStorage:`プリンターのスロットにカードもUSBメモリも検出されないため、スライス済みファイルの保存先がなく、Bambuddyが読み取るものもありませんでした。挿入すれば次の印刷は完全にアーカイブされます。`,titleInternalHistory:`最近の一部の印刷は、すでにプリンター内にあるファイルから開始されました`,bodyInternalHistory:`これらの印刷はプリンター自身のライブラリから実行されました — 画面からの再印刷、Handy からの開始、または以前に送信して後から印刷したファイルです。Bambuddy は印刷ファイルを FTP で読み取りますが、FTP が扱えるのはカードまたは USB メモリだけで、プリンターはそのライブラリを FTP の届かない領域に保存するため、読み取れる 3MF がありませんでした。これらの印刷では何も送信されていないので、スライサーの設定を変えても解決しません。名前と時間付きでのアーカイブは続き、「アーカイブを編集」で使用フィラメントを手入力できます。完全なアーカイブにするには、Bambuddy またはスライサーから印刷を開始してください。`,titleFtpsCooloff:`最近の一部の印刷を保存できませんでした — プリンターがファイル接続を拒否しました`,bodyFtpsCooloff:`Bambuddy がプリンターのファイル転送ポート (FTPS 990) を開いたところ、プリンターは TLS ではないもので応答したため、何も読み取れませんでした。これらの印刷は名前と時間付きでアーカイブされていますが、サムネイルとスライサーのメタデータはありません。これはスライサーの設定でも、お客様が変更したことでもありません。同じ機種・同じファームウェアが他の環境では正常に動作しており、影響を受けたプリンターも通常はしばらくすると自然に復帰します。この失敗のあと Bambuddy はそのプリンターへの転送を 5 分間停止し、停止が明けてからファイルを取りに戻ります。短時間の事象であれば自動的に埋まり、カードが空のままであれば拒否が再試行より長く続いたことを意味します。原因はまだ分かっていません。繰り返す場合は、システムページでデバッグログを有効にし、サポートバンドルを報告に添付してください。`,titleFtpTransferFailed:`最近の一部の印刷を保存できませんでした — ファイル転送が時間切れになりました`,bodyFtpTransferFailed:`スライス済みファイルはプリンターのカードにあり、プリンターも実際に送り出していましたが、許容時間内に転送が完了しませんでした。印刷開始時のプリンターはカメラ、ステータス通知、ジョブのアップロードも同時に処理しているため、大きな 3MF はその中を通り切れないことがあります。これらの印刷は名前と時間つきで保存されていますが、サムネイルとスライサー情報がありません。これはスライサーの設定ではなく、お客様が変更した結果でもありません。Bambuddy はその後 10 分のあいだにファイルを 3 回取りに戻るため、多くはひとりでに埋まります。カードが空のままの場合は、そのすべての試行も時間切れになったということです。繰り返す場合は、設定 > ネットワーク > FTP リトライ の 接続タイムアウト を大きくしてください。`,dismissLabel:`この通知を閉じる`},searchPlaceholder:`アーカイブを検索...`,filterByPrinter:`プリンターで絞り込み`,filterByStatus:`ステータスで絞り込み`,sortBy:`並べ替え`,sortNewest:`新しい順`,sortOldest:`古い順`,sortName:`名前順`,sortDuration:`時間順`,sortLargest:`大きい順`,sortSmallest:`小さい順`,sortSize:`サイズ`,noArchives:`アーカイブが見つかりません`,noArchivesSearch:`検索条件に一致するアーカイブがありません`,originalPrintNotVisible:`元の印刷が表示されていません - フィルターをクリアしてみてください`,noArchivesYet:`アーカイブはまだありません`,prints:`件`,pagination:{showing:`表示中`,to:`〜`,of:`/`,show:`表示`,page:`ページ`,all:`すべて`},loadingArchives:`アーカイブを読み込み中...`,releaseToUpload:`ドロップしてアップロード`,showAll:`すべて表示`,showFavoritesOnly:`お気に入りのみ表示`,gridView:`グリッド表示`,listView:`リスト表示`,calendarView:`カレンダー表示`,logView:`印刷ログ`,manageTags:`タグを管理`,showFailedPrints:`失敗した印刷を表示`,hideFailedPrints:`失敗した印刷を非表示`,hideDuplicates:`重複を非表示`,viewOriginalPrint:`クリックして元の印刷を表示 (#{{id}})`,printTime:`印刷時間`,filamentUsed:`フィラメント使用量`,cost:`コスト`,preview:`プレビュー`,deleteArchive:`アーカイブを削除`,deleteConfirm:`このアーカイブを削除しますか？`,favorite:`お気に入り`,unfavorite:`お気に入りから削除`,viewDetails:`詳細を表示`,status:{completed:`完了`,failed:`失敗`,stopped:`中止`},toast:{source3mfAttached:`ソース3MFを添付しました: {{filename}}`,failedUploadSource3mf:`ソース3MFのアップロードに失敗しました`,source3mfRemoved:`ソース3MFを削除しました`,failedRemoveSource3mf:`ソース3MFの削除に失敗しました`,f3dAttached:`F3Dを添付しました: {{filename}}`,failedUploadF3d:`F3Dのアップロードに失敗しました`,f3dRemoved:`F3Dを削除しました`,failedRemoveF3d:`F3Dの削除に失敗しました`,timelapseAttached:`タイムラプスを添付しました: {{filename}}`,timelapseAlreadyAttached:`タイムラプスは既に添付されています`,noMatchingTimelapse:`一致するタイムラプスが見つかりません`,failedScanTimelapse:`タイムラプスのスキャンに失敗しました`,failedAttachTimelapse:`タイムラプスの添付に失敗しました`,timelapseRemoved:`タイムラプスを削除しました`,failedRemoveTimelapse:`タイムラプスの削除に失敗しました`,timelapseUploaded:`タイムラプスをアップロードしました: {{filename}}`,failedUploadTimelapse:`タイムラプスのアップロードに失敗しました`,archiveDeleted:`アーカイブを削除しました`,failedDeleteArchive:`アーカイブの削除に失敗しました`,addedToFavorites:`お気に入りに追加しました`,removedFromFavorites:`お気に入りから削除しました`,projectUpdated:`プロジェクトを更新しました`,failedUpdateProject:`プロジェクトの更新に失敗しました`,linkCopied:`リンクをクリップボードにコピーしました`,failedCopyLink:`リンクのコピーに失敗しました`,photoDeleted:`写真を削除しました`,failedDeletePhoto:`写真の削除に失敗しました`,failedDeleteArchives:`アーカイブの削除に失敗しました`,failedUpdateFavorites:`お気に入りの更新に失敗しました`,exportDownloaded:`エクスポートをダウンロードしました`,exportFailed:`エクスポートに失敗しました`},menu:{print:`印刷`,openInBambuStudio:`スライサーで開く`,slice:`スライス`,externalLink:`外部リンク`,viewOnMakerWorld:`MakerWorldで表示`,preview3d:`3Dプレビュー`,viewTimelapse:`タイムラプスを表示`,scanForTimelapse:`タイムラプスをスキャン`,uploadTimelapse:`タイムラプスをアップロード`,removeTimelapse:`タイムラプスを削除`,downloadSource3mf:`ソース3MFをダウンロード`,uploadSource3mf:`ソース3MFをアップロード`,replaceSource3mf:`ソース3MFを置換`,removeSource3mf:`ソース3MFを削除`,uploadF3d:`F3Dをアップロード`,replaceF3d:`F3Dを置換`,downloadF3d:`Fusion 360デザインファイルをダウンロード`,removeF3d:`F3Dを削除`,download:`ダウンロード`,copyDownloadLink:`ダウンロードリンクをコピー`,qrCode:`QRコード`,viewPhotos:`写真を表示`,viewPhotosCount:`写真を表示 ({{count}})`,projectPage:`プロジェクトページ`,addToFavorites:`お気に入りに追加`,removeFromFavorites:`お気に入りから削除`,edit:`編集`,printLog:`印刷ログ`,goToProject:`プロジェクトへ: {{name}}`,addToProject:`プロジェクトに追加`,removeFromProject:`プロジェクトから削除`,loading:`アーカイブを読み込み中...`,noProjectsAvailable:`利用可能なプロジェクトがありません`,searchProjects:`プロジェクトを検索…`,select:`選択`,deselect:`選択解除`,delete:`削除`},permission:{noReprint:`このアーカイブを再印刷する権限がありません`,noAddToQueue:`キューに追加する権限がありません`,noUpdateArchives:`アーカイブを更新する権限がありません`,noUploadFiles:`ファイルをアップロードする権限がありません`,noDownload:`アーカイブをダウンロードする権限がありません`,noCopyLink:`ダウンロードリンクをコピーする権限がありません`,noDelete:`このアーカイブを削除する権限がありません`,noEdit:`このエントリを編集する権限がありません`,noCreate:`アーカイブを作成する権限がありません`},platePicker:{title:`プレビューするプレートを選択`,hint:`このアーカイブには複数のプレートがあります。GCodeビューアで開くプレートを選択してください。`,plateLabel:`プレート {{index}}`,objectCount:`{{count}} オブジェクト`,objectCount_plural:`{{count}} オブジェクト`,noGcode:`このアーカイブにはプレビュー可能なスライス済みGコードがありません。まずBambu Studioで開いてスライスしてください。`},card:{previousPlate:`前のプレート`,nextPlate:`次のプレート`,plateNumber:`プレート {{index}}`,moreOptions:`その他のオプション`,addToFavorites:`お気に入りに追加`,removeFromFavorites:`お気に入りから削除`,cancelled:`キャンセル`,failed:`失敗`,duplicate:`重複`,duplicateTitle:`このモデルは以前印刷されています`,openSource3mf:`ソース3MFをBambu Studioで開く（右クリックでオプション表示）`,downloadF3d:`Fusion 360デザインファイルをダウンロード`,viewTimelapse:`タイムラプスを表示`,viewPhoto:`写真を表示`,viewPhotos:`{{count}}枚の写真を表示`,openFolder:`フォルダーを開く: {{name}}`,slicedFile:`スライス済みファイル - 印刷可能`,sourceFile:`ソースファイルのみ - AMSマッピング不可`,gcode:`GCODE`,source:`ソース`,project:`プロジェクト: {{name}}`,runsBadge:`{{count}} 回印刷`,runsBadgeTitle:`合計 {{count}} 回 — 成功 {{successful}} 回、失敗 {{failed}} 回。クリックして印刷ログを開きます。`,estimated:`推定: {{time}}`,actual:`実際: {{time}}`,accuracy:`精度: {{percent}}%`,filament:`{{weight}} g`,layer:`{{count}} レイヤー`,layers:`{{count}} レイヤー`,object:`{{count}}オブジェクト`,objects:`{{count}}オブジェクト`,slicedFor:`{{model}}用にスライス`,uploadedBy:`アップロード者`,noPermissionReprint:`再印刷する権限がありません`,noFileForReprint:`3MFファイルがありません — 印刷記録時にプリンターからファイルをダウンロードできませんでした`,slicerAmsMapping:`AMSマッピングを保存済み（{{printer}}）`,slicerAmsMappingTooltip:`スライサーが選んだAMSスロットは{{printer}}用に保存されています。スロット番号はそのプリンターでのみ意味を持つため、再印刷で再利用されるのは再び{{printer}}に送る場合だけです。`,noPermissionEdit:`プロファイルを編集する権限がありません`,noPermissionDelete:`アーカイブを削除する権限がありません`,openInBambuStudio:`スライサーで開く`,openInBambuStudioToSlice:`スライサーでスライス`,slice:`スライス`,externalLink:`外部リンク`,makerWorld:`MakerWorld – {{designer}}`,viewProject:`プロジェクトを表示`,noExternalLink:`外部リンクなし`,preview3d:`3Dプレビュー`,download:`ダウンロード`,edit:`編集`,delete:`削除`},runLog:{title:`印刷ログ`,modalTitle:`印刷ログ — {{name}}`,modalTitleFallback:`このアーカイブ`,empty:`このアーカイブの印刷イベントはまだ記録されていません。`,col:{date:`日付`,status:`ステータス`,duration:`時間`,filament:`フィラメント`,cost:`コスト`},status:{completed:`完了`,failed:`失敗`,cancelled:`キャンセル`,stopped:`停止`,skipped:`スキップ`,printing:`印刷中`}},modal:{deleteArchive:`アーカイブを削除`,deleteConfirm:`"{{name}}" を削除しますか？この操作は取り消せません。`,deleteButton:`削除`,deletePurgeStats:`このプリントをQuick Statsからも削除（フィラメント、時間、コスト、電力）`,deleteQueueItemsWarning:`このアーカイブにリンクされた {{count}} 件のキュー項目も削除されます。`,deleteBlockedByPrinting:`削除できません — {{count}} 件のキュー項目が現在印刷中です。先に印刷を停止してから再試行してください。`,removeSource3mf:`ソース3MFを削除`,removeSource3mfConfirm:`"{{name}}"からソース3MFファイルを削除してもよろしいですか？元のスライサープロジェクトファイルが削除されます。`,removeButton:`削除`,removeF3d:`F3Dを削除`,removeF3dConfirm:`"{{name}}"からFusion 360デザインファイルを削除してもよろしいですか？`,removeTimelapse:`タイムラプスを削除`,removeTimelapseConfirm:`"{{name}}"からタイムラプス動画を削除してもよろしいですか？`,timelapse:`{{name}} - タイムラプス`,selectTimelapse:`タイムラプスを選択`,selectTimelapseDesc:`自動一致が見つかりませんでした。この印刷のタイムラプスを選択してください:`,deleteArchives:`印刷アーカイブを削除`,deleteArchivesConfirm:`{{count}}件のアーカイブを削除しますか？この操作は元に戻せません。`,deleteCount:`{{count}}件を削除`},page:{title:`印刷アーカイブ`,printsCount:`{{filtered}} / {{total}} 件のプリント`,dropFilesHere:`.3mfファイルをここにドロップ`,releaseToUpload:`ドロップしてアップロード`,only3mfSupported:`.3mfファイルのみ対応しています`,close:`閉じる`,selected:`{{count}}件選択中`,selectAll:`すべて選択`,tags:`タグ`,project:`プロジェクト`,favorite:`お気に入り`,delete:`削除`,toggledFavorites:`{{count}}件のアーカイブのお気に入りを切替えました`,failedUpdateFavorites:`お気に入りの更新に失敗しました`,archivesDeleted:`{{count}}件のアーカイブを削除しました`,failedDeleteArchives:`アーカイブの削除に失敗しました`,photoDeleted:`写真を削除しました`,failedDeletePhoto:`写真の削除に失敗しました`},list:{name:`名前`,printer:`プリンター`,date:`日付`,size:`サイズ`,actions:`操作`,hasTimelapse:`タイムラプスあり`},log:{date:`日時`,printName:`印刷名`,printer:`プリンター`,user:`ユーザー`,status:`ステータス`,duration:`所要時間`,filament:`フィラメント`,filamentUsed:`使用フィラメント量`,cost:`コスト`,energy:`電力量`,energyCost:`電力コスト`,completedAt:`終了`,columns:`列`,sortBy:`{{column}} で並べ替え`,allPrinters:`全プリンター`,allUsers:`全ユーザー`,allStatuses:`全ステータス`,cancelled:`キャンセル`,skipped:`スキップ`,dateFrom:`開始日`,dateTo:`終了日`,noEntries:`印刷ログが見つかりません`,showing:`{{total}}件中{{count}}件を表示`,rowsPerPage:`行数`,page:`ページ`,prev:`前へ`,next:`次へ`,clearLog:`ログをクリア`,clearLogTitle:`印刷ログをクリア`,clearLogConfirm:`すべての印刷ログエントリが完全に削除されます。アーカイブとキューアイテムには影響しません。この操作は元に戻せません。よろしいですか？`,clearLogButton:`すべてクリア`,cleared:`{{count}}件のログエントリを削除しました`,clearFailed:`印刷ログの削除に失敗しました`,deleteEntryTitle:`印刷ログのエントリを削除`,deleteEntryConfirm:`このエントリはログから削除され、フィラメント、時間、コストの寄与はクイック統計から除外されます。対応するアーカイブ（ある場合）は影響を受けません。この操作は取り消せません。`,entryDeleted:`印刷ログのエントリを削除しました`,entryDeleteFailed:`印刷ログのエントリを削除できませんでした`,editEntryTitle:`印刷ログのエントリを編集`,editEntryDescription:`この印刷を分類します。失敗分析ウィジェットはこれらの値でグループ化されるため、更新は即座に統計に反映されます。`,entryUpdated:`印刷ログのエントリを更新しました`,entryUpdateFailed:`印刷ログのエントリを更新できませんでした`,statuses:{completed:`完了`,failed:`失敗`,stopped:`停止`,cancelled:`キャンセル`,skipped:`スキップ`}}},dispatchToast:{untitled:`印刷ジョブ`,startingPrints:`印刷を開始しています`,progressSummary:`{{complete}}/{{total}} 完了 • 処理中: {{processing}}`,expandDetails:`送信の詳細を表示`,collapseDetails:`送信の詳細を非表示`,awaitingPrinter:`プリンターを待機中…`,status:{processing:`処理中`,completed:`完了`,failed:`失敗`},failed:{generic:`送信に失敗しました`,upload_failed:`プリンターへのアップロードに失敗しました`,start_command_failed:`プリンターが開始コマンドを拒否しました`},dismiss:`閉じる`},pipelineRuns:{title:`パイプライン実行`,loading:`読み込み中…`,empty:`パイプラインの実行はまだありません。`,filter:{pipeline:`パイプライン`,status:`ステータス`,target:`対象`,all:`すべて`,allPipelines:`すべてのパイプライン`,allStatus:`すべてのステータス`,allTargets:`すべての対象`,clear:`フィルターをクリア`,noMatches:`現在のフィルターに一致する実行はありません。`},totalCount_one:`{{n}} 件の実行`,totalCount_other:`{{n}} 件の実行`,copies:`{{n}} 部`,failedCount:`{{n}} 失敗`,copyN:`コピー {{n}}`,retryFailed:`失敗を再試行`,retryOf:`#{{n}} の再試行`,pagination:`{{total}} 件中 {{start}}–{{end}}`,toast:{cancelled:`実行をキャンセルしました`,cancelFailed:`キャンセルに失敗しました`,retryStarted:`再試行を開始しました`,retryFailed:`再試行に失敗しました`,cleared:`{{n}} 件の実行を削除しました`,clearFailed:`削除に失敗しました`},clearLog:`ログをクリア`,clearConfirmTitle:`ログをクリアしますか？`,clearConfirmBody:`完了、失敗、キャンセル、部分的失敗のすべてのパイプライン実行を削除しますか？実行中のものは残ります。元に戻せません。`,clearConfirmAction:`クリア`,jobStatus:{pending:`保留中`,awaiting_printer:`プリンター待機中`,queued:`待機中`,printing:`印刷中`,completed:`完了`,failed:`失敗`,cancelled:`キャンセル`},cancelledByUser:`ユーザーによりキャンセル`},queue:{filamentShort:{rowBadge:`割り当てられたスプールのフィラメントが不足しています`,rowTooltip:`スケジューラーがこのアイテムをフラグしました。再生ボタンをクリックしてスロットごとの不足量を確認し、それでも印刷するか判断してください。`,confirmTitle:`フィラメント不足`,confirmIntro:`割り当てられたスプールでは少なくとも 1 つのスロットを賄えません。それでも印刷しますか？`,lineItem:`スロット {{slot}}：必要 {{required}} g、残り {{remaining}} g`,unknown:`不明`,printAnyway:`それでも印刷`},slicerAmsMapping:{rowBadge:`このプリンター用に保存されたAMSスロット`,rowTooltip:`このアーカイブには、スライサーが選択した正確なAMSスロットが、この項目の対象プリンター用に保存されています。そのプリンターでの再印刷では、タイプと色で照合し直す代わりにそれらのトレイを再利用できます。`},title:`印刷キュー`,subtitle:`印刷ジョブのスケジュールと管理`,editQueueItem:`キューアイテムを編集`,selectAllPlates:`全{{count}}プレートを選択`,deselectAll:`全て解除`,printQueued:`キューに追加しました`,printQueuedWillStartWhenIdle:`プリンターがアイドル状態になると開始します`,itemsQueued:`{{count}}件をキューに追加しました`,sending:`送信中...`,sendingProgress:`送信中 {{current}}/{{total}}...`,adding:`追加中...`,addingProgress:`追加中 {{current}}/{{total}}...`,savingProgress:`保存中 {{current}}/{{total}}...`,clearQueue:`キューをクリア`,clearHistory:`履歴をクリア`,emptyQueue:`キューは空です`,position:`順番`,scheduledTime:`予定時刻`,moveUp:`上に移動`,moveDown:`下に移動`,startNow:`今すぐ開始`,printingInProgress:`印刷中...`,viewArchive:`アーカイブを表示`,viewInFileManager:`ファイルマネージャーで表示`,itemCount:`{{count}}件`,itemCount_plural:`{{count}}件のアイテム`,dragToReorder:`ドラッグして並べ替え（ASAPのみ）`,reorderHint:`順番はASAPアイテムのみに影響します。スケジュール済みアイテムは設定時刻に実行されます。`,sjf:{label:`SJF`,tooltip:`短いジョブ優先 — スケジューラーが短い印刷を優先します`},addedBy:`{{name}} が追加`,nextInQueue:`次のキュー`,clearPlateSuccess:`プレートをクリアしました — 次の印刷の準備完了`,plateNumber:`プレート {{index}}`,quantity:`数量`,quantityHint:`{{count}}件のキューアイテムを作成`,plateQuantityLabel:`{{plate}} の実行回数`,plateQuantityTotal_one:`合計 {{count}} 回`,plateQuantityTotal_other:`合計 {{count}} 回`,batchOrders:{title:`バッチ注文`,emptyTitle:`バッチ注文はありません`,emptyDescription:`複数プレートのファイル、または同じプレートを複数回キューに入れると、注文がここに進捗とともに表示されます。`,filter:{active:`進行中`,completed:`完了`,cancelled:`キャンセル済み`,all:`すべて`},status:{active:`進行中`,completed:`完了`,cancelled:`キャンセル済み`},noTargets:`グループのみ`,noTargetsHint:`プレートごとの目標数が導入される前に作成されたため、目標ではなくキューに入れた実行を追跡します。`,dispatchRemaining:`残り{{count}}件をキューに追加`,dispatchPlate:`残りをキューに追加`,strandedPlate:`設定をコピーできる実行がありません`,strandedNotice:`未実行の {{owed}} 件のうち {{runs}} 件をキューに追加できません。このプレートには、設定をコピーできるキュー内または完了済みの実行が残っていません。ファイルからこのプレートを一度キューに追加するか、オーダーをキャンセルしてください。`,dispatched:`{{name}} の残りの実行をキューに追加しました`,plateProgress:`{{target}}件中{{completed}}件完了`,remaining:`残り{{count}}件`,failed:`{{count}}件失敗`,printing:`{{count}}件印刷中`,wholeFile:`ファイル全体`,due:`期限 {{date}}`,costSoFar:`これまで {{amount}}`,costRemaining:`(残り {{amount}})`},activeBatches:`アクティブなバッチ`,batchProgress:`{{total}}件中{{completed}}件完了`,cancelBatch:`残りをキャンセル`,batchCancelled:`残りのバッチアイテムをキャンセルしました`,cancelBatchConfirmTitle:`バッチをキャンセル`,cancelBatchConfirmMessage:`このオーダーを終了しますか？キューに残っている実行はキャンセルされ、未生産分の要求も止まります。`,batch:{defaultName:`バッチ`,label:`{{count}}件`,label_plural:`{{count}}件`,pendingCount:`{{count}}件待機中`,pendingCount_plural:`{{count}}件待機中`,expand:`バッチを展開`,collapse:`バッチを折りたたむ`,groupAsBatch:`バッチとしてグループ化…`,groupAsBatchDescription:`選択した{{count}}件をひとつの折りたたみ可能なバッチにまとめます。`,nameLabel:`バッチ名`,namePlaceholder:`例：金曜のプレゼント`,create:`バッチを作成`,ungroup:`グループ解除`,ungroupConfirmTitle:`バッチのグループを解除しますか？`,ungroupConfirmMessage:`アイテムはキューに残りますが、グループ化されなくなります。`,dragGroup:`グループをドラッグ`},tabs:{batches:`バッチ`,queue:`キュー`,history:`履歴`,timeline:`タイムライン`,pipelines:`パイプライン`},layout:{flatList:`リスト`,byPrinter:`プリンター別`,groupByPrinter:`プリンター別にグループ化`},history:{emptyTitle:`履歴はまだありません`,emptyDescription:`完了・キャンセル・失敗した印刷がここに表示されます。`,showMore:`さらに表示`,showingCount:`{{total}} 件中 {{shown}} 件を表示`},dragGhost:{multiCount:`{{count}}件`,batch:`{{name}}（{{count}}部）`,batch_plural:`{{name}}（{{count}}部）`},sections:{currentlyPrinting:`印刷中`,queued:`キュー中`,history:`履歴`},status:{pending:`待機中`,waiting:`待機中`,printing:`印刷中`,paused:`一時停止`,completed:`完了`,failed:`失敗`,skipped:`スキップ`,cancelled:`キャンセル済み`},summary:{printing:`印刷中`,queued:`キュー中`,totalTime:`キュー合計時間`,totalWeight:`キュー合計重量`,history:`履歴`},filter:{allPrinters:`すべてのプリンター`,unassigned:`未割当`,allStatus:`すべてのステータス`,allLocations:`すべてのロケーション`,any:`すべて`},sort:{byPosition:`順番で並べ替え`,byName:`名前で並べ替え`,byPrinter:`プリンターで並べ替え`,bySchedule:`スケジュールで並べ替え`,byDate:`日付で並べ替え`,ascendingOldest:`昇順（古い順）`,descendingNewest:`降順（新しい順）`},badges:{staged:`ステージ済み`,requiresPrevious:`前の成功が必要`,autoPowerOff:`自動電源オフ`,gcodeInjection:`G-code`},empty:{title:`スケジュールされた印刷はありません`,description:`アーカイブページのコンテキストメニューから「スケジュール」オプションを使用するか、ファイルをドラッグ＆ドロップして始めましょう。`},time:{etaIfStartedNow:`このジョブを今開始した場合の完了予定時刻`,whenFree:`プリンターが空き次第`,overdue:`期限超過`,now:`今すぐ`,lessThanMinute:`1分以内`,inMinutes:`{{count}}分後`,inHours:`{{count}}時間後`},actions:{startPrint:`印刷を開始`,stopPrint:`印刷を停止`,requeue:`再キュー`},bulkEdit:{title:`{{count}}件のアイテムを編集`,title_plural:`{{count}}件のアイテムを編集`,description:`変更した設定のみが選択されたアイテムに適用されます。`,printer:`プリンター`,noChange:`— 変更なし —`,queueOptions:`キューオプション`,staged:`ステージ済み`,autoPowerOff:`印刷後に自動電源オフ`,requirePrevious:`前の成功を必要とする`,gcodeInjection:`G-codeを挿入`,printOptions:`印刷オプション`,bedLevelling:`ベッドレベリング`,flowCalibration:`フローキャリブレーション`,vibrationCalibration:`振動キャリブレーション`,layerInspection:`第一層検査`,timelapse:`タイムラプス`,useAms:`AMS使用`,nozzleOffsetCali:`ノズルオフセットキャリブレーション`,applyChanges:`変更を適用`,selectAll:`すべて選択`,deselectAll:`すべて選択解除`,selected:`{{count}}件選択中`,editSelected:`選択を編集`,cancelSelected:`選択をキャンセル`},confirm:{cancelTitle:`スケジュール済み印刷をキャンセル`,cancelMessage:`「{{name}}」をキャンセルしますか？`,stopTitle:`印刷を停止`,stopMessage:`現在の印刷「{{name}}」を停止しますか？プリンター上の印刷ジョブがキャンセルされます。`,removeTitle:`履歴から削除`,removeMessage:`「{{name}}」をキュー履歴から削除しますか？`,clearHistoryTitle:`履歴をクリア`,clearHistoryMessage:`{{count}}件の履歴をすべて削除しますか？`,cancelButton:`印刷をキャンセル`,stopButton:`印刷を停止`,thisPrint:`この印刷`,thisItem:`このアイテム`},toast:{cancelled:`キャンセル済み`,cancelFailed:`アイテムのキャンセルに失敗しました`,removed:`キューアイテムを削除しました`,keptForOrder:`削除ではなくキャンセルしました: バッチオーダーがこのプレートを再度キューに追加できる唯一の実行です`,historyKeptForOrders:`バッチオーダーがまだ必要とする {{kept}} 件は残しました。`,removeFailed:`プロジェクトからのアーカイブ削除に失敗しました`,stopped:`印刷を停止しました`,stopFailed:`印刷の停止に失敗しました`,released:`印刷をキューにリリースしました`,startFailed:`印刷の開始に失敗しました`,reorderFailed:`キューの並べ替えに失敗しました`,historyCleared:`{{count}}件の履歴をクリアしました`,clearHistoryFailed:`履歴のクリアに失敗しました`,updateFailed:`アイテムの更新に失敗しました`,bulkCancelled:`{{count}}件のアイテムをキャンセルしました`,bulkCancelFailed:`アイテムのキャンセルに失敗しました`,batchCreated:`バッチ「{{name}}」を作成しました`,batchCreateFailed:`バッチの作成に失敗しました`,batchUngrouped:`{{count}}件のグループを解除しました`,batchUngroupFailed:`バッチのグループ解除に失敗しました`,resumedAfterFailure:`キューを再開しました — {{restored}}件のジョブを保留状態に戻しました`,resumeAfterFailureFailed:`キューの再開に失敗しました`},resumeAfterFailure:{banner:`{{printer}} は前回の印刷失敗によりブロックされています — {{count}}件のジョブをスキップしました`,bannerHint:`プリンターの問題を解決してから再開すると、スキップされたジョブを復元してブロックを解除できます。`,button:`失敗後に再開`,confirmTitle:`失敗後にキューを再開しますか？`,confirmMessage:`{{printer}} のスキップされた {{count}} 件のジョブを保留状態に戻し、前回の印刷ブロックを解除します。続行する前にプリンターが準備完了していることを確認してください。`},timeline:{listView:`リスト`,timelineView:`タイムライン`,unassigned:`未割当`,noData:`この日の予定された印刷はありません`,nothingCommitted:`この時間枠に確定したスケジュールはありません。手動開始のステージ済み項目、待機中の項目、アイドル状態のプリンターのASAPジョブは表示されません — 予定時刻を設定するか、ステージ済み項目をリリースすると表示されます。`,allDoneBy:`すべての印刷は {{time}} までに完了予定`,staged:`ステージング`,filterAll:`すべて表示`,filterPrinting:`印刷中`,filterQueued:`待機中`,time:{anyMoment:`まもなく`,minutesLeft:`残り{{minutes}}分`,hoursLeft:`残り{{hours}}時間`,hoursMinutesLeft:`残り{{hours}}時間{{minutes}}分`},day:{previous:`前日`,next:`翌日`,today:`今日`},window:{back12h:`12時間戻る`,forward12h:`12時間進む`,now:`現在`},printerColumnHeader:`プリンター`},permissions:{noStopPrint:`印刷を停止する権限がありません`,noStartPrint:`印刷を開始する権限がありません`,noEdit:`このキューアイテムを編集する権限がありません`,noCancel:`このキューアイテムをキャンセルする権限がありません`,noRequeue:`アイテムを再キューする権限がありません`,noRemove:`このキューアイテムを削除する権限がありません`,noClearHistory:`すべての履歴をクリアする権限がありません`,noEditItems:`キューアイテムを編集する権限がありません`,noCancelItems:`キューアイテムをキャンセルする権限がありません`}},stats:{title:`統計`,subtitle:`ウィジェットをドラッグして並べ替え。目のアイコンをクリックして非表示。`,overview:`概要`,totalPrints:`総印刷数`,successRate:`成功率`,totalPrintTime:`総印刷時間`,printTime:`印刷時間`,totalFilament:`総フィラメント使用量`,filamentUsed:`フィラメント使用量`,filamentCost:`フィラメントコスト`,totalCost:`総コスト`,energyUsed:`エネルギー使用量`,energyCost:`エネルギーコスト`,energyWarmingUpTooltip:`エネルギー追跡は毎時スナップショットを収集中です。選択範囲の前に少なくとも1つのスナップショットが存在すると、期間合計が正確になります。初期値は過小になる場合があります。`,averagePrintTime:`平均印刷時間`,printsPerDay:`1日あたりの印刷数`,byPrinter:`プリンター別`,printsByPrinter:`プリンター別印刷数`,byMaterial:`素材別`,byMonth:`月別`,last7Days:`過去7日間`,last30Days:`過去30日間`,last90Days:`過去90日間`,allTime:`全期間`,quickStats:`クイック統計`,printActivity:`印刷アクティビティ`,filamentTypes:`フィラメントタイプ`,filamentTrends:`フィラメントトレンド`,failureAnalysis:`失敗分析`,timeAccuracy:`時間精度`,successful:`成功`,failed:`失敗`,cancelled:`キャンセル`,perfectEstimate:`100% = 完全な推定`,noTimeAccuracyData:`時間精度データがありません`,noFilamentData:`フィラメントデータがありません`,noPrinterData:`プリンターデータがありません`,noPrintData:`印刷データがありません`,noPrintDataLast30Days:`過去30日間の印刷データがありません`,failureReasons:`失敗理由`,topFailureReasons:`主な失敗理由`,failedPrintsCount:`{{failed}} / {{total}} 件の印刷が失敗`,lastWeekRate:`先週: {{rate}}%`,resetLayout:`レイアウトをリセット`,recalculateCosts:`コストを再計算`,recalculateCostsHint:`現在のフィラメント価格ですべてのアーカイブコストを再計算`,exportStats:`統計をエクスポート`,exportAsCsv:`CSVでエクスポート`,exportAsExcel:`Excelでエクスポート`,hiddenCount:`{{count}}件非表示`,exportDownloaded:`エクスポートをダウンロードしました`,exportFailed:`エクスポートに失敗しました`,layoutReset:`レイアウトをリセットしました`,recalculatedCosts:`{{count}}件のアーカイブのコストを再計算しました`,recalculateFailed:`コストの再計算に失敗しました`,loadingStats:`統計を読み込み中...`,noPermissionResetLayout:`レイアウトをリセットする権限がありません`,noPermissionRecalculate:`コストを再計算する権限がありません`,noPrintDataInRange:`選択した期間にデータがありません`,periodFilament:`フィラメント使用量`,periodCost:`コスト`,avgPerPrint:`1印刷あたりの平均`,usageOverTime:`時間推移`,energyOverTime:`エネルギー使用量の推移`,filamentByWeight:`重量`,printDuration:`印刷時間分布`,printerUtilization:`プリンター稼働率`,filamentSuccess:`素材別成功率`,printHabits:`印刷習慣`,printTimeOfDay:`時間帯別プリント`,colorDistribution:`カラー分布`,noColorData:`カラーデータがありません`,records:`記録`,longestPrint:`最長プリント`,heaviestPrint:`最重プリント`,mostExpensivePrint:`最高額`,busiestDay:`最多プリント日`,successStreak:`連続成功`,streakPrint:`連続プリント`,streakPrints:`{{count}}連続プリント`,printerStats:`プリンター統計`,hours:`時間`,avgPrints:`平均印刷数`,noArchiveData:`印刷データがありません`,filamentByTime:`推移`,avgWeight:`平均重量`,avgTime:`平均時間`,filamentByPrints:`印刷数`,timeframe:{today:`今日`,"this-week":`今週`,"this-month":`今月`,"last-7":`過去7日間`,"last-30":`過去30日間`,"last-90":`過去90日間`,"this-year":`今年`,"all-time":`全期間`,custom:`カスタム`,from:`開始`,to:`終了`},allUsers:`全ユーザー`,noUser:`ユーザーなし（システム）`,filterByUser:`ユーザーでフィルター`},maintenance:{title:`メンテナンス`,overview:`概要`,allOk:`すべてのメンテナンスは最新です`,dueCount:`{{count}}件の期限到来`,dueCount_plural:`{{count}}件の期限到来`,warningCount:`{{count}}件の警告`,warningCount_plural:`{{count}}件の警告`,totalPrintTime:`総印刷時間`,nextMaintenance:`次回メンテナンス`,nothingDue:`予定なし`,tasks:`タスク`,lastPerformed:`前回実施日`,interval:`間隔`,hoursRemaining:`残り{{hours}}時間`,hoursOverdue:`{{hours}}時間超過`,markDone:`完了にする`,performMaintenance:`メンテナンスを実施`,history:`履歴`,noHistory:`メンテナンス履歴がありません`,editPrintHours:`印刷時間を編集`,currentHours:`現在の時間`,statusTab:`ステータス`,settingsTab:`設定`,overdueCount:`{{count}}件超過`,dueSoonCount:`{{count}}件まもなく期限`,dueSoon:`まもなく期限`,allGood:`問題なし`,overdueBy:`{{duration}}超過`,dueIn:`あと{{duration}}`,timeLeft:`残り{{duration}}`,day:`1日`,days:`{{count}} 日`,week:`1週間`,weeks:`{{count}}週間`,month:`1ヶ月`,months:`{{count}}ヶ月`,year:`1年`,maintenanceTypes:`メンテナンスタイプ`,maintenanceTypesDescription:`システムタイプとカスタムメンテナンスタスク`,addCustomType:`カスタムタイプを追加`,restoreDefaults:`デフォルトタスクを復元`,intervalType:`インターバルタイプ`,intervalValue:`間隔 ({{type}})`,icon:`アイコン`,documentationLink:`ドキュメントリンク（任意）`,assignToPrinters:`プリンターに割り当て`,selectAtLeastOnePrinter:`プリンターを1台以上選択してください`,addType:`タイプを追加`,custom:`カスタム`,printHours:`印刷時間`,calendarDays:`カレンダー日数`,exampleName:`例: HEPAフィルター交換`,viewDocumentation:`ドキュメントを表示`,timeBasedInterval:`時間ベースのインターバル`,intervalOverrides:`インターバルのオーバーライド`,intervalOverridesDescription:`特定のプリンターの間隔をカスタマイズ`,assignedToPrinters:`割り当て済みプリンター：`,noPrintersAssigned:`プリンター未割り当て`,addPrinterShort:`追加:`,printersAssignedClick:`{{count}}台のプリンターを割り当て済み - クリックして管理`,removeFromPrinter:`このプリンターから削除`,types:{lubricateCarbonRods:`カーボンロッドの潤滑`,lubricateRails:`リニアレールの潤滑`,cleanNozzle:`ノズル/ホットエンドの清掃`,checkBelts:`ベルト張力の確認`,cleanBuildPlate:`ビルドプレートの清掃`,checkExtruder:`エクストルーダーギアの確認`,checkCooling:`冷却ファンの確認`,generalInspection:`総合点検`,cleanCarbonRods:`カーボンロッドの清掃`,lubricateSteelRods:`スチールロッドの潤滑`,cleanSteelRods:`スチールロッドの清掃`,cleanLinearRails:`リニアレールの清掃`,checkPtfeTube:`PTFEチューブの確認`,replaceHepaFilter:`HEPAフィルター交換`,replaceCarbonFilter:`カーボンフィルター交換`,lubricateLeftNozzleRail:`左ノズルレールの潤滑`},maintenanceComplete:`メンテナンスを完了としてマークしました`,typeUpdated:`メンテナンスタイプを更新しました`,typeDeleted:`メンテナンスタイプを削除しました`,defaultsRestored:`デフォルトタスクを{{count}}件復元しました`,printHoursUpdated:`印刷時間を更新しました`,printerAssigned:`プリンターを割り当てました`,printerRemoved:`プリンターを削除しました`,deleteTypeConfirm:`「{{name}}」を削除しますか？`,deleteSystemTypeTitle:`デフォルトのメンテナンスタスクを削除しますか？`,deleteSystemTypeMessage:`デフォルトのメンテナンスタスク「{{name}}」を削除してもよろしいですか？`,noPermissionUpdate:`メンテナンス記録を更新する権限がありません`,noPermissionPerform:`メンテナンスを実行する権限がありません`,noPermissionEditTypes:`メンテナンスタイプを編集する権限がありません`,noPermissionDeleteTypes:`メンテナンスタイプを削除する権限がありません`,noPermissionEditHours:`メンテナンス時間を編集する権限がありません`,noPermissionRemovePrinter:`プリンターの割り当てを解除する権限がありません`,noPermissionAssignPrinter:`プリンターを割り当てる権限がありません`,noPermissionEditIntervals:`メンテナンス間隔を編集する権限がありません`,configureSettings:`メンテナンスタイプと間隔を設定`},settings:{sliceEngine:`スライスエンジン`,sliceEngineSidecar:`サーバーサイドカー`,sliceEngineSidecarHint:`スライスはサーバー上のスライサーサイドカーコンテナーで実行されます。`,sliceEngineBrowser:`ブラウザー内`,sliceEngineBrowserHint:`スライスはサーバーを介さず、このデバイス上で実行されます。`,title:`設定`,general:`一般`,tabs:{general:`一般`,smartPlugs:`スマートプラグ`,sensors:`センサー`,notifications:`通知`,queue:`ワークフロー`,queueDispatch:`キューとディスパッチ`,queuePipelines:`パイプライン`,filament:`フィラメント`,network:`ネットワーク`,apiKeys:`APIキー`,virtualPrinter:`仮想プリンター`,spoolbuddy:`SpoolBuddy`,failureDetection:`失敗検出`,users:`認証`,backup:`バックアップ`,emailAuth:`メール認証`,ldap:`LDAP`,twoFa:`二段階認証`,oidc:`SSO / OIDC`,security:`セキュリティ`},spoolbuddy:{infoTitle:`SpoolBuddy デバイス`,infoBody:`SpoolBuddy キオスクはハートビートにより自動的に登録されます。使用されなくなった場合や、デーモンのクラッシュにより古い重複が残った場合は、ここでデバイスの登録を解除してください。`,duplicatesTitle:`{{count}} 台のデバイスが登録されています`,duplicatesBody:`キオスク UI は最初に登録されたデバイスのみを使用します。クラッシュによる古い重複がある場合は登録解除してください。オンラインのデバイスは次回のハートビートで自動的に再登録されます。`,empty:`SpoolBuddy デバイスはまだ登録されていません。`,online:`オンライン`,offline:`オフライン`,unregister:`登録解除`,unregisterSuccess:`デバイスの登録を解除しました`,unregisterError:`デバイスの登録解除に失敗しました`,confirmTitle:`SpoolBuddy デバイスの登録を解除しますか？`,confirmBody:`「{{hostname}}」（{{deviceId}}）をデータベースから削除します。デバイスがオンラインの場合、次回のハートビートで自動的に再登録されます。`,ipAddress:`IPアドレス`,firmware:`ファームウェア`,lastSeen:`最終接続`,daemonUptime:`デーモン稼働時間`,systemUptime:`システム稼働時間`,never:`なし`,nfc:`NFC`,scale:`計量器`,cpuTemp:`CPU 温度`,cpuLoad:`CPU 負荷`,memory:`メモリ`,disk:`ディスク`,update:`アップデート`,updateConfirmTitle:`Spoolbuddyデーモンを更新しますか？`,updateConfirmBody:`"{{hostname}}"のソフトウェア更新を実行しますか？更新後にデーモンが再起動されます。`,restartBrowser:`ブラウザを再起動`,restartBrowserConfirmTitle:`キオスクブラウザを再起動しますか？`,restartBrowserConfirmBody:`"{{hostname}}"のキオスクブラウザを再起動しますか？画面が一時的に消えます。`,restartDaemon:`デーモンを再起動`,restartDaemonConfirmTitle:`Spoolbuddyデーモンを再起動しますか？`,restartDaemonConfirmBody:`"{{hostname}}"のSpoolbuddyデーモンを再起動しますか？デバイスが数秒間オフラインになります。`,reboot:`再起動`,rebootConfirmTitle:`デバイスを再起動しますか？`,rebootConfirmBody:`"{{hostname}}"を再起動しますか？デバイスは約1分間オフラインになります。`,shutdown:`シャットダウン`,shutdownConfirmTitle:`デバイスをシャットダウンしますか？`,shutdownConfirmBody:`"{{hostname}}"をシャットダウンしますか？再起動には物理的なアクセスが必要です。`,commandConfirm:`確認`,commandQueued:`コマンドをキューに追加しました`,commandError:`コマンドの送信に失敗しました`},ldap:{title:`LDAP認証`,enabledDesc:`LDAP認証が有効です`,disabledDesc:`LDAP認証が無効です`,disabledHint:`以下のLDAP設定を構成して保存し、有効にしてください。`,enabled:`LDAP認証を有効にしました`,disabled:`LDAP認証を無効にしました`,feature1:`LDAP資格情報でログインできます`,feature2:`ローカル管理者アカウントはフォールバックとして残ります`,feature3:`ログイン時にLDAPグループがBamBuddyグループにマッピングされます`,serverConfig:`LDAPサーバー設定`,serverUrl:`サーバーURL`,serverUrlHint:`標準はldap://、SSL接続はldaps://を使用`,security:`セキュリティ`,securityHint:`StartTLSはプレーン接続をTLSにアップグレードします。LDAPSは最初からTLSを使用します。`,bindDn:`バインドDN（サービスアカウント）`,bindPassword:`バインドパスワード`,searchBase:`検索ベースDN`,userFilter:`ユーザー検索フィルター`,userFilterHint:`{username}はログインユーザー名に置き換えられます。OpenLDAPの場合は(uid={username})を使用。`,advanced:`詳細設定`,autoProvision:`ユーザー自動作成`,autoProvisionHint:`初回LDAPログイン時にBamBuddyアカウントを自動作成`,defaultGroup:`デフォルトグループ`,defaultGroupNone:`— なし（フォールバックなし）—`,defaultGroupHint:`LDAPユーザーが認証されたがマッピングされたLDAPグループに属していない場合に割り当てられるフォールバックグループ。空欄の場合、マッピングされていないユーザーは権限なしのままになります。`,groupMapping:`グループマッピング（JSON）`,groupMappingHint:`LDAPグループDNをBamBuddyグループにマッピング。利用可能なグループ: `,testConnection:`接続テスト`,settingsSaved:`LDAP設定を保存しました`,errors:{serverRequired:`LDAPサーバーURLは必須です`,searchBaseRequired:`検索ベースDNは必須です`,enableAuthFirst:`先に認証を有効にしてください`,configureLdapFirst:`先にLDAP設定を保存してください`}},email:{smtpSettings:`SMTP設定`,smtpHost:`SMTPサーバー`,smtpPort:`SMTPポート`,security:`セキュリティ`,authentication:`認証`,username:`ユーザー名`,password:`パスワード`,fromEmail:`送信元メールアドレス`,fromName:`送信者名`,testConnection:`SMTP接続テスト`,testRecipient:`テスト受信者メール`,sendTest:`テストメール送信`,sending:`送信中...`,save:`設定を保存`,saving:`保存中...`,advancedAuth:`高度な認証`,advancedAuthEnabled:`高度な認証が有効です`,advancedAuthEnabledDesc:`メールベースのユーザー管理機能が有効になっています。新規ユーザーには自動生成されたパスワードがメールで送信され、ユーザーはパスワード忘れ機能でパスワードをリセットできます。`,advancedAuthDisabled:`高度な認証が無効です`,advancedAuthDisabledDesc:`高度な認証を有効にして、ユーザー管理のメールベース機能を有効化してください。`,enable:`有効にする`,disable:`無効にする`,feature1:`パスワードは自動生成され、新規ユーザーにメールで送信されます`,feature2:`ユーザーはユーザー名またはメールでログインできます`,feature3:`パスワード忘れ機能が利用可能です`,feature4:`管理者はメールでユーザーパスワードをリセットできます`,errors:{requiredFields:`すべての必須フィールドに入力してください`,usernameRequired:`認証が有効な場合、ユーザー名は必須です`,enterTestEmail:`テストメールアドレスを入力してください`,smtpServerAndEmail:`テストする前にSMTPサーバーと送信元メールを入力してください`,usernamePasswordRequired:`認証が有効な場合、ユーザー名とパスワードは必須です`,configureSmtpFirst:`最初にSMTP設定を構成してテストしてください`,enableAuthFirst:`メール関連機能をご利用いただくには、まず認証を有効にしてください。`},success:{settingsSaved:`SMTP設定を保存しました`},securityOptions:{starttls:`STARTTLS (ポート 587)`,ssl:`SSL/TLS (ポート 465)`,none:`なし (ポート 25)`},authOptions:{enabled:`有効`,disabled:`無効`}},appearance:`外観`,notifications:`通知`,smartPlugs:`スマートプラグ`,spoolman:`Spoolman`,updates:`アップデート`,language:`言語`,languageDescription:`表示言語を選択してください`,theme:`テーマ`,themeLight:`ライト`,themeDark:`ダーク`,themeSystem:`システム設定に従う`,defaultView:`デフォルト画面`,defaultViewDescription:`アプリ起動時に表示するページ`,checkForUpdates:`アップデートを確認`,autoUpdate:`自動アップデート`,currentVersion:`現在のバージョン`,latestVersion:`最新バージョン`,upToDate:`最新です`,updateAvailable:`アップデートあり`,notificationLanguage:`通知の言語`,notificationLanguageDescription:`プッシュ通知の言語`,bedCooledThreshold:`ベッド冷却しきい値`,bedCooledThresholdDescription:`印刷後にベッドが冷却されたと見なす温度`,userNotificationsEnabled:`ユーザー通知`,userNotificationsEnabledDescription:`ユーザー通知メニューと印刷ジョブイベントのメール通知を有効にします。高度な認証が必要です。`,userNotificationsDisabledHint:`ユーザー通知を使用するには高度な認証を有効にしてください。`,notificationProviders:`通知プロバイダー`,addProvider:`プロバイダーを追加`,editProvider:`プロバイダーを編集`,providerType:`プロバイダーの種類`,testNotification:`テスト通知`,testSuccess:`テスト通知を送信しました`,testFailed:`テスト通知の送信に失敗しました`,quietHours:`おやすみ時間`,quietHoursDescription:`この時間帯は通知を送信しません`,quietHoursStart:`開始`,quietHoursEnd:`終了`,events:{title:`通知イベント`,printStart:`印刷開始`,printComplete:`印刷完了`,printFailed:`印刷失敗`,printStopped:`印刷中止`,printProgress:`進捗マイルストーン`,printProgressDescription:`25%, 50%, 75%で通知`,printerOffline:`プリンターオフライン`,printerError:`プリンターエラー`,filamentLow:`フィラメント残量低下`,maintenanceDue:`メンテナンス期限`,maintenanceDueDescription:`メンテナンスが必要なときに通知`},smartPlug:{title:`スマートプラグ`,add:`スマートプラグを追加`,edit:`スマートプラグを編集`,name:`名前`,ipAddress:`IPアドレス`,linkedPrinter:`連携プリンター`,autoOn:`自動電源オン`,autoOnDescription:`印刷開始時に電源を入れる`,autoOff:`自動電源オフ`,autoOffDescription:`印刷完了後に電源を切る`,offDelay:`オフ遅延`,offDelayMinutes:`印刷後の待機時間（分）`,offDelayTemp:`ノズル温度が下回ったとき`,currentState:`現在の状態`,turnOn:`電源オン`,turnOff:`電源オフ`},filamentTracking:`フィラメント追跡`,filamentTrackingDesc:`フィラメントスプールの追跡方法を選択してください。内蔵インベントリまたは外部Spoolmanサーバーを使用できます。`,autoAddUnknownRfid:`不明なRFIDスプールを自動追加`,autoAddUnknownRfidDesc:`不明なRFIDタグのスプールが検出されたとき、自動的に在庫エントリを作成します。新しいスプールを事前に手動で登録している場合は、重複を避けるためにオフにしてください。`,filamentChecks:`フィラメントチェック`,disableFilamentWarnings:`フィラメント警告を無効化`,disableFilamentWarningsDesc:`印刷またはキュー追加時にフィラメント不足の警告を表示しない`,preferLowestFilament:`残量が少ないフィラメントを優先`,preferLowestFilamentDesc:`複数のスプールが一致する場合、残量が最も少ないものを使用します`,preferLowestFilamentBackupNote:`プリンタ側でAMSフィラメントバックアップが有効な場合のみ動作します。無効の場合、選択したスプールが切れても予備スプールに切り替えできません。`,trackingModeBuiltIn:`内蔵インベントリ`,trackingModeBuiltInDesc:`RFID自動検出と使用量追跡を含む`,trackingModeSpoolmanDesc:`外部フィラメント管理サーバー`,builtInFeatureRfid:`AMS内のBambu Lab RFIDスプールを自動検出`,builtInFeatureUsage:`プリントごとのフィラメント消費量を追跡`,builtInFeatureCatalog:`スプール、カラー、K値プロファイルを管理`,builtInFeatureThirdParty:`サードパーティ製スプールをインベントリスプールに割り当て可能`,amsSyncButton:`AMSから重量を同期`,amsSyncTitle:`AMSからスプール重量を同期`,amsSyncMessage:`接続されたプリンターの現在のAMS残量値で、すべてのインベントリスプール重量を上書きします。破損した重量データの復旧に使用してください。プリンターがオンラインである必要があります。`,amsSyncing:`同期中...`,amsSyncSuccess:`{{synced}}個のスプールを同期、{{skipped}}個をスキップ`,amsSyncError:`AMSからの重量同期に失敗しました`,spoolmanAmsSyncButton:`AMSからSpoolmanの重量を同期`,spoolmanAmsSyncTitle:`AMSからSpoolmanスプール重量を同期`,spoolmanAmsSyncMessage:`接続されたプリンターの現在のAMS残量値に基づいて、すべてのSpoolmanスプール重量を更新します。プリンターがオンラインである必要があります。`,spoolmanAmsSyncing:`同期中...`,spoolmanAmsSyncSuccess:`{{synced}}個のSpoolmanスプールを同期、{{skipped}}個をスキップ`,spoolmanAmsSyncError:`AMSからのSpoolman重量同期に失敗しました`,spoolmanAmsSyncErrorUnreachable:`同期失敗（Spoolmanに接続できません）`,spoolmanAmsSyncErrorNotConfigured:`同期失敗（Spoolmanが設定されていません）`,spoolmanNotConfigured:`Spoolmanが設定されていません`,spoolmanFilamentCatalogTitle:`Spoolmanフィラメントカタログ`,spoolmanFilamentCatalogDesc:`Spoolmanインスタンスのフィラメント名と風袋重量。名前とスプール重量はここで編集できます。その他の属性はSpoolmanで直接管理してください。`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`Spoolmanサーバーのurl（例：http://localhost:7912）`,spoolmanConnected:`接続中`,spoolmanDisconnected:`未接続`,status:`ステータス`,connect:`接続`,disconnect:`切断`,howSyncWorks:`同期の仕組み`,syncInfoRfidOnly:`RFIDを搭載した公式Bambu Labスプールのみ同期されます`,syncInfoAutoCreate:`新しいスプールは初回同期時にSpoolmanに自動作成されます`,syncInfoThirdPartySkipped:`Bambu Lab以外のスプール（サードパーティ、リフィル）はスキップされます`,linkingExistingSpools:`既存スプールのリンク`,linkingExistingSpoolsDesc:`既存のSpoolmanスプールをAMSにリンクするには、AMSスロットにカーソルを合わせて「Spoolmanにリンク」をクリックしてください。`,syncMode:`同期モード`,syncModeAuto:`自動`,syncModeManual:`手動のみ`,syncModeAutoDesc:`変更が検出されるとAMSデータが自動的に同期されます`,syncModeManualDesc:`手動でトリガーした場合のみ同期`,syncAmsData:`AMSデータを同期`,syncAmsDataDesc:`プリンターのAMSデータをSpoolmanに手動同期`,allPrinters:`全プリンター`,noDefaultPrinter:`デフォルトなし（毎回選択）`,sidebarOrder:`サイドバーの順序`,saveThumbnails:`サムネイルを保存`,captureFinishPhoto:`完了写真を撮影`,noPrintersConfigured:`プリンターが設定されていません`,archiveMode:{always:`常にアーカイブを作成`,never:`アーカイブを作成しない`,ask:`毎回確認`},checkForUpdatesLabel:`アップデートを確認`,checkPrinterFirmware:`プリンターファームウェアの確認`,includeBetaUpdates:`ベータ版を含める`,includeBetaUpdatesDesc:`アップデート確認時にベータ版およびプレリリース版を通知する`,localLogin:{disable:`ローカルのユーザー名／パスワードログインを無効化`,disableHint:`有効にすると、SSOプロバイダーのみでサインインできます。LDAPには影響しません。復旧用のパスを残すには、サーバーで BAMBUDDY_LOCAL_LOGIN=true を設定してください。`},enableRetry:`リトライを有効化`,homeAssistantDescription:`Home Assistantに接続してHA REST APIでスマートプラグを制御します。switch、light、input_booleanエンティティに対応しています。`,environmentManagedLabel:`(環境変数で管理)`,autoEnabledViaEnv:`環境変数により自動的に有効化されました`,urlFromEnvReadOnly:`HA_URL環境変数で設定された値（読み取り専用）`,tokenFromEnvReadOnly:`HA_TOKEN環境変数で設定された値（読み取り専用）`,mqttConnectedTo:`接続先:`,prometheusDescription:`プリンターデータをPrometheus形式で公開`,noSmartPlugsTitle:`スマートプラグが設定されていません`,noSmartPlugsDescription:`Tasmotaベースのスマートプラグを追加して、エネルギー消費を追跡し、電源制御を自動化します。`,noProvidersTitle:`プロバイダーが設定されていません`,noProvidersDescription:`アラートを受信するにはプロバイダーを追加してください。`,noTemplatesAvailable:`テンプレートがありません。バックエンドを再起動してデフォルトテンプレートを生成してください。`,apiPermissionView:`プリンターステータスとキューを表示`,apiPermissionEdit:`印刷キューにアイテムを追加・削除`,apiKeysEmptyTitle:`APIキーがありません`,apiKeysEmptyDescription:`外部サービスと連携するためのAPIキーを作成してください。`,noUsersFound:`ユーザーが見つかりません`,noGroupsFound:`グループが見つかりません`,noGroupsAvailable:`利用可能なグループがありません`,passwordsDoNotMatch:`パスワードが一致しません`,systemGroupWarning:`システムグループ名は変更できません`,authDisabledTitle:`認証が無効です`,authDisabledFeature1:`システムへのアクセスにログインを要求`,authDisabledFeature2:`グループベースの権限で複数ユーザーを作成`,authDisabledFeature3:`50以上のきめ細かな権限でアクセスを制御`,userHasCreated:`このユーザーは以下を作成しています：`,userItemsQuestion:`これらのアイテムをどうしますか？`,deleteUserConfirm:`このユーザーを削除してもよろしいですか？この操作は元に戻せません。`,actionCannotBeUndone:`この操作は元に戻せません`,addFirstSmartPlug:`最初のスマートプラグを追加`,providers:`プロバイダー`,log:`ログ`,testAll:`すべてテスト`,testResults:`テスト結果`,testPassedCount:`{{count}}件成功`,testFailedCount:`{{count}}件失敗`,messageTemplates:`メッセージテンプレート`,messageTemplatesDescription:`各イベントの通知メッセージをカスタマイズ。`,apiKeys:`APIキー`,apiKeysDescription:`外部連携やWebhook用のAPIキーを作成します。`,createKey:`キーを作成`,apiKeyCreated:`APIキーを作成しました`,apiKeyCopyWarning:`今すぐこのキーをコピーしてください - 再表示されません！`,useInApiBrowser:`APIブラウザーで使用`,apiKeyQrButton:`QRコード`,apiKeyQrTitle:`スキャンして設定`,apiKeyQrCaption:`モバイルアプリでスキャンして、このサーバーとAPIキーを追加します。`,apiKeyQrWarning:`秘密のAPIキーが含まれています。他人に見られる場所で共有・スクリーンショットしないでください。`,createNewApiKey:`新しいAPIキーを作成`,keyName:`キー名`,keyNamePlaceholder:`例: Home Assistant, OctoPrint`,readStatus:`ステータスの読み取り`,readStatusDescription:`プリンターのステータス、キュー、ライブラリ、アーカイブ、スライサーパイプラインを表示`,manageQueue:`キューの管理`,manageQueueDescription:`印刷キューへのアイテムの追加と削除。「ライブラリの管理」と併せてスライサーパイプラインを実行`,controlPrinter:`プリンターの制御`,controlPrinterDescription:`印刷の一時停止、再開、停止`,manageLibrary:`ライブラリの管理`,manageLibraryDescription:`ライブラリファイルのアップロード、名前変更、削除、スライス。MakerWorld からのモデルインポート。「キューの管理」と併せてスライサーパイプラインを実行。`,manageInventory:`在庫の管理`,manageInventoryDescription:`スプールと在庫レコードの作成、更新、削除。SpoolBuddy キオスク（NFC スキャン、はかり読み取り、キオスクのシステムコマンド）に必要です。`,manageMaintenance:`メンテナンスの管理`,manageMaintenanceDescription:`完了したメンテナンスの記録、カウンターのリセット、間隔の編集、メンテナンス種類カタログの管理。より広範なプリンター制御を許可することなく「ノズルをクリーニングした」を記録する Home Assistant オートメーションに適しています。`,manageArchives:`アーカイブの管理`,manageArchivesDescription:`古い印刷とその統計への寄与の削除を含む、印刷アーカイブの編集と削除。印刷履歴を整理するオートメーションに適しています。`,manageProjects:`プロジェクトの管理`,manageProjectsDescription:`プロジェクトの作成、更新、削除、およびプロジェクトへのアーカイブの追加。印刷をプロジェクトに整理するオートメーションに適しています。`,maintenanceBadge:`メンテナンス`,archivesBadge:`アーカイブ`,projectsBadge:`プロジェクト`,libraryBadge:`ライブラリ`,inventoryBadge:`在庫`,cloudAccess:`クラウドアクセスを許可`,cloudAccessDescription:`Bambu Cloudのプリセットとフィラメントを代わりに読み込みます。Bambu Cloudへのサインインが必要です。`,cloudBadge:`クラウド`,updateEnergyCost:`電気料金を更新`,updateEnergyCostDescription:`このキーが /settings/electricity-price に新しいkWhごとの電気料金をPOSTすることを許可。Home Assistantの動的料金自動化（Tibber、Octopusなど）に便利。これはAPIキーで書き込み可能な唯一の設定フィールドです。`,energyCostBadge:`電力`,legacyKey:`レガシー`,legacyKeyTooltip:`ユーザー所有以前に作成 - クラウドアクセスには再作成が必要`,unnamedKey:`名前なしキー`,lastUsed:`最終使用:`,read:`読み取り`,control:`制御`,createFirstKey:`最初のキーを作成`,webhookEndpoints:`Webhookエンドポイント`,webhookApiKeyHint:`X-API-KeyヘッダーでAPIキーを使用してください。`,webhook:{getAllStatus:`全プリンターステータスを取得`,getSpecificStatus:`特定のプリンターステータスを取得`,addToQueue:`印刷キューに追加`,pausePrint:`印刷を一時停止`,resumePrint:`印刷を再開`,stopPrint:`印刷を停止`},apiBrowser:`APIブラウザ`,apiBrowserDescription:`すべての利用可能なAPIエンドポイントを探索してテストします。`,apiKeyForTesting:`テスト用APIキー`,apiKeyPlaceholder:`CallMeBot APIキー`,apiKeyHint:`このキーはX-API-Keyヘッダーとしてリクエストに送信されます。`,deleteApiKeyTitle:`APIキーを削除`,deleteApiKeyMessage:`このAPIキーを削除してもよろしいですか？このキーを使用しているすべての連携が動作しなくなります。`,deleteKey:`キーを削除`,amsDisplayThresholds:`AMS表示しきい値`,amsThresholdsDescription:`AMS湿度と温度インジケーターの色しきい値を設定します。`,humidity:`湿度`,goodGreen:`良好（緑）≤`,fairOrange:`普通（オレンジ）≤`,aboveFairBad:`普通のしきい値以上は赤（悪い）で表示`,fairAlsoDryingThreshold:`このしきい値は自動乾燥のトリガーにも使用されます`,fairBelowDryingFloor:`自動乾燥ではこの値に到達できません。AMS はヒーター動作中に {{floor}}% 以上を示すため、各サイクルが終了してすぐに再開してしまいます。自動乾燥を使う場合は {{floor}}% より高く設定してください。`,temperature:`温度`,goodBlue:`良好（青）≤`,aboveFairHot:`普通のしきい値以上は赤（高温）で表示`,tempAlarmThreshold:`アラームのしきい値`,tempAlarmSeparateFromBand:`通知を出すのはアラームのしきい値だけです。良好・普通は表示の色分けのみに使われます。空欄にすると、これまでどおり普通のしきい値で発報します。`,tempAlarmMustBePositive:`0以下のしきい値は無視され、普通のしきい値で発報します。`,historyRetention:`履歴の保持`,keepSensorHistory:`センサー履歴の保持期間`,historyRetentionDescription:`古い湿度と温度データは自動的に削除されます`,defaultPrintOptions:`デフォルト印刷オプション`,defaultPrintOptionsDescription:`新しい印刷のデフォルト値を設定します。印刷ダイアログで個別に変更できます。`,defaultBedLevelling:`ベッドレベリング`,defaultBedLevellingDesc:`印刷前にベッドを自動レベリング`,defaultFlowCali:`フローキャリブレーション`,defaultFlowCaliDesc:`押出フローのキャリブレーション`,defaultVibrationCali:`振動キャリブレーション`,defaultVibrationCaliDesc:`リンギングアーティファクトを低減`,defaultLayerInspect:`第1層検査`,defaultLayerInspectDesc:`AIによる第1層の検査`,defaultTimelapse:`タイムラプス`,defaultTimelapseDesc:`タイムラプス動画を記録`,defaultNozzleOffsetCali:`ノズルオフセットキャリブレーション`,defaultNozzleOffsetCaliDesc:`エクストルーダー間のノズルオフセットを校正`,tempFanPresetsTitle:`温度・ファンプリセット`,tempFanPresetsDescription:`プリンターカードの温度およびファン速度ポップオーバーに表示されるクイック選択値をカスタマイズします。オフボタンは常に表示されます。`,tempFanPresetsNozzle:`ノズル温度`,tempFanPresetsBed:`ベッド温度`,tempFanPresetsChamber:`チャンバー温度`,tempFanPresetsFan:`ファン速度`,tempFanPresetsReset:`デフォルトにリセット`,concurrentUploadsTitle:`同時アップロード`,concurrentUploadsDescription:`キューが同時にファイルを送信できるプリンター数です。プリンターのファイル受信は遅く（大きな造形では数分かかることもあります）、各プリンターは順番を待ちます。台数の多い環境では、この値を上げることで、バッチ内の最後のプリンターが先行するすべての転送を待たずに済みます。ネットワークや Bambuddy ホストが並列転送に耐えられない場合は下げてください。`,concurrentUploadsLabel:`同時に送信するプリンター数`,concurrentUploadsHelp:`1 にすると 1 台ずつ送信します（従来の動作）。既定値は 4 です。`,staggeredStart:`段階的開始`,staggeredStartDescription:`複数プリンターのバッチ開始を段階的に行う際のデフォルトのグループサイズと間隔。プリントモーダルでバッチごとに上書き可能。`,preheatTitle:`プレヒート & ヒートソーク`,preheatDescription:`キュー内の各印刷を開始する前に、ベッド（および対応している場合はチャンバー）を加熱し、温度を保持します。エンジニアリング素材（PA、ABS）をチャンバー能動加熱のないプリンターで使う際に有効です。ソーク中はベッドの放射熱でチャンバーが温まります。ベッド目標温度は印刷ファイルから読み取られ、チャンバーの挙動はプリンター機種によって異なります。`,preheatEnabled:`プレヒート & ソークを有効化`,preheatEnabledDesc:`オフにすると、キュー内の印刷は即時開始されます。各キュー項目で印刷ごとに上書き可能です。`,preheatFilamentTargetsLabel:`フィラメント別チャンバー目標 (°C)`,preheatFilamentTargetsHint:`Bambuddyはロード済みのAMSスロット中で最も高い目標値を選びます。すべてのスロットが0となる印刷（PLA、PETG、TPU、PVA）は予熱を完全にスキップし、すぐに開始します。`,preheatFilamentTargetsReset:`デフォルトにリセット`,preheatFilamentTargetsDefaultRow:`その他 / 未登録`,preheatMaxWait:`最大待機時間（秒）`,preheatMaxWaitHelp:`ソークへ移行するまでのチャンバー加熱フェーズの上限。`,preheatSoak:`ソーク（秒）`,preheatSoakHelp:`目標到達後または最大待機経過後の保持時間。`,preheatHardwareTitle:`プリンター別の挙動:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1EはM141でチャンバーを能動加熱します。X1C/P2Sはチャンバー温度を取得しますが、加熱はベッド放射のみです。P1S/P1P/A1/A1 Miniにはチャンバーセンサーがなく、ソークタイマーのみが適用されます。`,preheatPerItemDesc:`この印刷を開始する前にベッドとチャンバーを加熱します。既定では設定 → ワークフローのグローバルトグルを使用します。`,preheatOverride_inherit:`継承`,preheatOverride_on:`オン`,preheatOverride_off:`オフ`,calibrationMode_off:`オフ`,calibrationMode_on:`オン`,calibrationMode_auto:`自動`,preheatTargetOverride:`チャンバー目標を上書き (°C、空欄でフィラメント既定値)`,preheatTargetOverrideHelp:`0 はチャンバーなしでベッドを加熱し、ソークを実行します。空欄のままにすると、チャンバーが不要な印刷は予熱を完全にスキップします。`,plateClear:`プレートクリア確認`,requirePlateClear:`プレートクリア確認を必須にする`,requirePlateClearDescription:`有効にすると、スケジューラーは完了したプリンターでキューの印刷を開始する前に、プリンターごとのプレートクリア確認を待ちます。無効にすると、プリンターカード上のプレート状態バッジと「プレートをクリア済みにする」ボタンも非表示になります。`,keepBedWarm:`印刷間ベッド温度維持`,keepBedWarmDesc:`プレートクリア確認待ち中、下記の保温温度でベッドを維持してチャンバーを温かく保ちます。次の印刷のベッド温度の方が高い場合はそちらを使用します。次の印刷がチャンバー加熱を必要とする場合のみ適用されます（ASA、ABS、PA、PC など）。プレートクリア確認が有効になっている必要があります。`,keepWarmBedTemp:`保温時のベッド温度 (°C)`,keepWarmBedTempHelp:`ベッドでチャンバーを加熱する場面で使用されます（保温中、および印刷ファイルにベッド温度が含まれない場合の予熱時）。印刷ファイルのベッド温度の方が高い場合は、常にそちらが優先されます。`,keepWarmMaxMinutes:`保温を終了するまでの時間（分）`,keepWarmMaxMinutesHelp:`この時間内にプレートが片付けられない場合、ヒーターは無期限に加熱を続けず停止します。`,gcodeInjection:`G-codeインジェクション`,gcodeInjectionDescription:`Farmloop、SwapMod、AutoClear、Printflow 3Dなどの自動印刷システム用に、印刷の開始と終了時にカスタムG-codeを挿入します。スニペットはプリンターモデルごとに設定し、キューアイテム��「G-codeを挿入」を有効にすると適用されます。`,gcodeInjectionNoPrinters:`プリンターが見つかりません。G-codeスニペットを設定するにはプリンターを追加してください。`,gcodeStartLabel:`開始G-code`,gcodeEndLabel:`終了G-code`,gcodeStartPlaceholder:`印刷開始前に挿入されるG-code...`,gcodeEndPlaceholder:`印刷終了後に追加されるG-code...`,staggerGroupSize:`グループサイズ`,staggerGroupSizeHelp:`グループあたり同時に開始するプリンター数`,staggerInterval:`間隔（分）`,staggerIntervalHelp:`各グループ開始までの遅延`,queueDrying:`自動乾燥`,queueDryingDescription:`キュー印刷の合間にプリンターがアイドル状態の時、AMSフィラメントを自動的に乾燥します。上記の湿度しきい値を使用します。`,queueDryingEnabled:`自動乾燥を有効にする`,queueDryingEnabledDescription:`プリンターがアイドル状態で湿度がしきい値を超えた場合、AMS乾燥を自動的に開始`,queueDryingBlock:`乾燥完了まで待機`,queueDryingBlockDescription:`乾燥が完了するまで印刷キューをブロックします。オフの場合、印刷が優先されます。`,ambientDryingEnabled:`常時乾燥`,ambientDryingEnabledDescription:`キューに関係なく、アイドル状態のプリンターで湿度がしきい値を超えた場合に自動的にフィラメントを乾燥。`,printDryingEnabled:`印刷中も乾燥を継続`,printDryingEnabledDescription:`対応ハードウェア（H2D、H2C、H2S、P2S、H2D Pro、X2D、X1C、A2L、最新ファームウェア）で印刷中も自動乾燥を継続します。スプール保護のため、乾燥温度はアイドル時のプリセットより自動的に5°C低く制限されます。`,dryingPresets:`乾燥プリセット`,dryingPresetsDescription:`フィラメントタイプごとの温度と時間。AMS 2 Proは低温、AMS-HTは高温に対応。`,dryingFilament:`フィラメント`,humidityThresholds:`湿度しきい値`,humidityThresholdsDescription:`フィラメントタイプごとの自動乾燥・アラームのトリガー湿度。同一AMSで混在の場合は最も低いしきい値を使用。`,humidityThresholdCol:`しきい値`,humidityThresholdDefault:`デフォルト（未知のタイプ）`,printModal:`印刷ダイアログ`,expandCustomMapping:`カスタムマッピングをデフォルトで展開`,expandCustomMappingDescription:`複数プリンターに印刷する際、プリンターごとのAMSマッピングを展開表示`,authentication:`認証`,authEnabledDescription:`ユーザー認証でインスタンスが保護されています`,authDisabledDescription:`認証を有効にして、ユーザーアカウントの作成、権限の管理、Bambuddyインスタンスのセキュリティを確保しましょう。`,authDisabledMessage:`認証を有効にして、ユーザーアカウントの作成、権限の管理、Bambuddyインスタンスのセキュリティを確保しましょう。`,enableAuthentication:`認証を有効にする`,currentUser:`現在のユーザー`,changePassword:`パスワードを変更`,admin:`管理者`,users:`ユーザー`,addUser:`ユーザーを追加`,groups:`グループ`,addGroup:`グループを追加`,system:`システム`,noDescription:`説明なし`,userCount:`{{count}}人のユーザー`,permissionCount:`{{count}}件の権限`,createUser:`ユーザーを作成`,username:`ユーザー名`,enterUsername:`ユーザー名を入力`,password:`パスワード`,enterPassword:`パスワードを入力`,passwordRequirements:`大文字、小文字、数字、特殊文字を各1文字以上含む8文字以上。`,confirmPassword:`パスワードの確認`,confirmPasswordPlaceholder:`パスワードを確認`,viewReleaseOnGitHub:`GitHubでリリースを表示`,turnAllPlugsOn:`すべてのプラグをオン`,turnAllPlugsOff:`すべてのプラグをオフ`,clearNotificationLogs:`通知ログをクリア`,clearLogsMessage:`30日以上前のすべての通知ログを完全に削除します。この操作は元に戻せません。`,clearLogs:`通知ログを削除`,resetUiPreferences:`UI設定をリセット`,resetUiPreferencesMessage:`すべてのUI設定をデフォルトにリセットします：サイドバー順序、テーマ、ダッシュボードレイアウト、表示モード、ソート設定。プリンター、アーカイブ、サーバー設定は影響を受けません。クリア後にページがリロードされます。`,resetPreferences:`設定をリセット`,deleteGroupTitle:`グループを削除`,deleteGroupMessage:`このグループを削除しますか？このグループのユーザーはこれらの権限を失います。`,deleteGroup:`グループを削除`,disableAuthenticationTitle:`認証を無効化`,disableAuthenticationMessage:`認証を無効にしますか？Bambuddyインスタンスにログインなしでアクセスできるようになります。ユーザーはデータベースに残りますが、認証は無効になります。`,disableAuthentication:`認証を無効化`,configureBambuddy:`Bambuddyを設定`,systemDefault:`システムデフォルト`,archiveSettings:`アーカイブ設定`,newWindow:`新しいウィンドウ`,embeddedOverlay:`埋め込みオーバーレイ`,preferredSlicer:`優先スライサー`,preferredSlicerDescription:`APIサイドカー経由のアプリ内スライス処理に使用するスライサー`,openInSlicerLabel:`スライサーで開く`,openInSlicerInherit:`APIスライサーと同じ`,openInSlicerDescription:`「スライサーで開く」ボタンが使用するデスクトップスライサー。継承するには「APIスライサーと同じ」のままにするか、ローカルで使用する別のスライサーを選択します。`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-devには、Bambu作成の3MFの多くをスライスできない既知のCLIバグがあります — 上流イシュー#12426（ペイント済みマルチエクストルーダーファイルでのsegfault）および#13386（パラメータ範囲の厳格検証拒否）を参照。上流の修正がリリースされるまで、Bambu Studioを推奨します。`,useSlicerApi:`スライサーAPIを使用`,useSlicerApiDescription:`オンの場合、「Slice」アクションはアプリ内スライサーモーダルを開き、slicer-APIサイドカーを呼び出します。オフ（デフォルト）の場合、URIスキーム経由でデスクトップスライサーに引き継がれます。`,slicerCard:`スライサー`,orcaslicerApiUrl:`OrcaSlicer sidecar URL`,bambuStudioApiUrl:`Bambu Studio sidecar URL`,slicerStallTimeout:`スライサー停止タイムアウト（分）`,slicerStallTimeoutDescription:`サイドカーからの進捗がこの時間なければスライスを中止します。進捗を報告し続ける重いモデルは、どれだけ時間がかかっても中断されません。進捗を報告しないサイドカーでは、この値が合計時間の上限になります。`,slicerApiUrlDescription:`slicer-APIサイドカーコンテナのURL。空のままにすると SLICER_API_URL / BAMBU_STUDIO_API_URL 環境変数のデフォルト値が使用されます。`,externalCameras:`外部カメラ`,costTracking:`コスト追跡`,printsOnly:`印刷のみ`,totalConsumption:`総消費量`,dataManagement:`データ管理`,storageUsage:`ストレージ使用量`,storageUsageDescription:`カテゴリ別のデータ使用量の内訳`,storageUsageTotal:`合計`,storageUsageErrors:`エラー`,storageUsageOtherBreakdown:`その他（静的アセット、スクリプト、設定ファイルを含む）`,storageUsageSystem:`システム`,storageUsageData:`データ`,storageUsageUnavailable:`ストレージ使用量情報は利用できません`,clearNotificationLogsDescription:`30日以上前の通知ログを削除`,resetUiPreferencesDescription:`サイドバー順序、テーマ、表示モード、レイアウト設定をリセット。プリンター、アーカイブ、設定は影響を受けません。`,enableHomeAssistant:`Home Assistantを有効化`,enableMqtt:`MQTTを有効化`,useTls:`TLSを使用`,enableMetricsEndpoint:`メトリクスエンドポイントを有効化`,availableMetrics:`利用可能なメトリクス`,billingEnabled:`課金を有効にする`,billingEnabledDescription:`ユーザーにプリント料金を請求し、財務機能を有効にします`,printerKillSwitch:`印刷の自動停止`,printerKillSwitchDescription:`承認されていない印刷を即座に停止する`,financeBudgetReset:`月次財務予算のリセット`,financeBudgetResetDay:`リセット日`,financeBudgetResetDayHelp:`短い月の場合、リセットは月の最終日を使用します。`,financeBudgetResetTimezone:`リセットタイムゾーン`,financeBudgetResetTimezoneHelp:`L'inizio della finestra di bilancio viene calcolato in questo fuso orario.`,rebuildLedger:`ウォレットレジャーを再構築`,rebuildLedgerStarted:`レジャー再構築が開始されました`,rebuildLedgerConfirmTitle:`ウォレットレジャーを再構築しますか?`,rebuildLedgerConfirmMessage:`これにより、ウォレットレジャーが再構築され、履歴残高値が修復されます。何をしているかを確認した時にのみこれを実行してください。`,rebuildLedgerInProgress:`再構築を開始中...`,editUser:`ユーザーを編集`,deleteUserTitle:`ユーザーを削除`,groupName:`グループ名`,leaveEmptyForAnonymous:`匿名の場合は空のまま`,leaveEmptyForNoAuth:`認証なしの場合は空のまま`,enterNewPassword:`新しいパスワードを入力`,confirmNewPassword:`新しいパスワードを確認`,enterGroupName:`グループ名を入力`,enterDescriptionOptional:`説明を入力（任意）`,enterCurrentPassword:`現在のパスワードを入力`,enterNewPasswordMin6:`新しいパスワードを入力（6文字以上）`,toast:{keyCopied:`キーをクリップボードにコピーしました`,copyFailed:`キーのコピーに失敗しました`,keyAddedToBrowser:`キーをAPIブラウザに追加しました`,clearLogsFailed:`ログの削除に失敗しました`,uiPreferencesReset:`UI設定をリセットしました。更新中...`,authDisabled:`認証を無効にしました`,authDisableFailed:`認証の無効化に失敗しました`,apiKeyCreated:`APIキーを作成しました`,apiKeyDeleted:`APIキーを削除しました`,userCreated:`ユーザーが正常に作成されました`,userUpdated:`ユーザーが正常に更新されました`,userDeleted:`ユーザーが正常に削除されました`,groupCreated:`グループを作成しました`,groupUpdated:`グループを更新しました`,groupDeleted:`グループを削除しました`,fillRequiredFields:`必須項目をすべて入力してください`,passwordsDoNotMatch:`パスワードが一致しません`,passwordTooShort:`パスワードは8文字以上必要です`,passwordNeedsUppercase:`パスワードには少なくとも1つの大文字を含める必要があります`,passwordNeedsLowercase:`パスワードには少なくとも1つの小文字を含める必要があります`,passwordNeedsDigit:`パスワードには少なくとも1つの数字を含める必要があります`,passwordNeedsSpecial:`パスワードには少なくとも1つの特殊文字を含める必要があります`,enterGroupName:`グループ名を入力`,settingsSaved:`設定を保存しました`,noPermissionUpdate:`設定を変更する権限がありません`,cameraSettingsSaved:`カメラ設定を保存しました`,enterCameraUrl:`カメラURLを入力してください`,passwordChanged:`パスワードが正常に変更されました`,connectionFailed:`接続失敗`,testFailed:`テスト通知の送信に失敗しました`,cameraConnected:`カメラ接続{{resolution}}`,cameraConnectedCoalesced:`カメラ接続{{resolution}}（実行中のキャプチャと共有）`},testConnection:`接続テスト`,catalog:{spoolCatalog:`スプールカタログ`,spoolCatalogDescription:`ブランド/タイプ別の空スプール重量。スプール追加時の自動重量検索に使用されます。`,searchCatalog:`カタログを検索...`,addNewEntry:`新しいエントリを追加`,namePlaceholder:`名前（例：Bambu Lab - プラスチック）`,weight:`重量`,type:`タイプ`,default:`デフォルト`,custom:`カスタム`,noMatch:`検索に一致するエントリがありません`,empty:`カタログにエントリがありません`,deleteEntry:`エントリを削除`,deleteConfirm:`「{{name}}」を削除してもよろしいですか？`,resetCatalog:`カタログをリセット`,resetConfirm:`カタログをデフォルトにリセットしますか？カスタムエントリはすべて削除されます。`,loadFailed:`スプールカタログの読み込みに失敗しました`,nameWeightRequired:`名前と重量は必須です`,entryAdded:`エントリを追加しました`,addFailed:`エントリの追加に失敗しました`,entryUpdated:`エントリを更新しました`,updateFailed:`エントリの更新に失敗しました`,entryDeleted:`エントリを削除しました`,deleteFailed:`エントリの削除に失敗しました`,resetSuccess:`カタログをデフォルトにリセットしました`,resetFailed:`カタログのリセットに失敗しました`,exported:`{{count}}件のエントリをエクスポートしました`,imported:`{{added}}件のエントリをインポートしました（{{skipped}}件スキップ）`,importFailed:`インポートに失敗しました：無効なJSON形式`,exportTooltip:`カタログをJSONにエクスポート`,importTooltip:`JSONからカタログをインポート`,resetTooltip:`デフォルトにリセット`,selectedCount:`{{count}}件選択中`,deleteSelected:`選択を削除`,bulkDeleteConfirm:`{{count}}件のエントリーを削除してもよろしいですか？`,bulkDeleted:`{{count}}件のエントリーを削除しました`,bulkDeleteFailed:`エントリーの削除に失敗しました`,material:`材料`,spoolWeight:`スプール重量`,color:`色`,updateSpoolWeight:`スプール重量を更新`,filamentUpdated:`フィラメントを更新しました`,filamentUpdateFailed:`フィラメントの更新に失敗しました`,filamentUpdateInvalid:`フィラメントデータが無効です`,keepExistingSpoolWeight:`既存スプールの旧重量を保持`,keepExistingSpoolWeightDesc:`このフィラメントタイプで既に作成されたスプールは旧風袋重量を保持します。新しいスプールは更新後の値を使用します。`,applyToAllSpools:`全スプールに適用`,applyToAllSpoolsDesc:`このフィラメントタイプの全重量計算に新しい風袋重量が即座に適用されます。`},colorCatalog:{title:`カラーカタログ`,description:`メーカー/素材別のフィラメントカラー。スプール追加時の自動カラー検索に使用されます。`,searchColors:`カラーを検索...`,allManufacturers:`すべてのメーカー`,addNewColor:`新しいカラーを追加`,manufacturer:`メーカー`,colorName:`カラー名`,hex:`16進数`,materialOptional:`素材（任意）`,showing:`{{total}}件中{{filtered}}件を表示`,noMatch:`検索に一致するカラーがありません`,empty:`カタログにカラーがありません`,deleteColor:`カラーを削除`,deleteConfirm:`「{{name}}」を削除してもよろしいですか？`,resetCatalog:`カラーカタログをリセット`,resetConfirm:`カタログをデフォルトにリセットしますか？カスタムカラーはすべて削除されます。`,sync:`同期`,starting:`開始中...`,syncTooltip:`FilamentColors.xyzから同期（2000+カラー）`,loadFailed:`カラーカタログの読み込みに失敗しました`,fieldsRequired:`メーカー、カラー名、Hexカラーは必須です`,colorAdded:`カラーを追加しました`,addFailed:`カラーの追加に失敗しました`,colorUpdated:`カラーを更新しました`,updateFailed:`カラーの更新に失敗しました`,colorDeleted:`カラーを削除しました`,deleteFailed:`カラーの削除に失敗しました`,resetSuccess:`カラーカタログをデフォルトにリセットしました`,resetFailed:`カタログのリセットに失敗しました`,syncUpToDate:`最新の状態です（{{count}}件のカラーを確認）`,syncComplete:`{{added}}件の新しいカラーを追加しました（{{skipped}}件は既に存在）`,syncError:`同期エラー`,syncFailed:`FilamentColors.xyzからの同期に失敗しました`,exported:`{{count}}件のカラーをエクスポートしました`,imported:`{{added}}件のカラーをインポートしました（{{skipped}}件スキップ）`,importFailed:`インポートに失敗しました：無効なJSON形式`,selectedCount:`{{count}}件選択中`,deleteSelected:`選択を削除`,bulkDeleteConfirm:`{{count}}件のカラーを削除してもよろしいですか？`,bulkDeleted:`{{count}}件のカラーを削除しました`,bulkDeleteFailed:`カラーの削除に失敗しました`},dateFormat:`日付形式`,dateFormatUs:`米国 (MM/DD/YYYY)`,dateFormatEu:`EU (DD/MM/YYYY)`,dateFormatIso:`ISO (YYYY-MM-DD)`,timeFormat:`時刻形式`,timeFormat12:`12時間制 (3:30 PM)`,timeFormat24:`24時間制 (15:30)`,defaultPrinter:`デフォルトプリンター`,defaultPrinterDescription:`アップロード、再印刷、その他の操作でこのプリンターを事前選択します。`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`サイドバーレイアウトで項目の並べ替え、表示状態のリセット、カスタムリンクの管理を行います。`,setDefault:`デフォルト設定`,sidebarOrderSetDefaultHint:`デフォルト設定は、まだカスタマイズしていないユーザーに現在のメニュー順序を適用します。`,sidebarDefaultSet:`デフォルトメニュー順序を設定しました。`,sidebarDefaultCleared:`デフォルトメニュー順序をクリアしました。`,sidebarDefaultFailed:`デフォルトメニュー順序の設定に失敗しました。`,reset:`リセット`,darkMode:`ダークモード`,lightMode:`ライトモード`,active:`(アクティブ)`,background:`背景`,accent:`アクセント`,style:`スタイル`,bgNeutral:`ニュートラル`,bgWarm:`ウォーム`,bgCool:`クール`,bgOled:`OLEDブラック`,bgSlate:`スレートブルー`,bgForest:`フォレストグリーン`,accentGreen:`グリーン`,accentTeal:`ティール`,accentBlue:`ブルー`,accentOrange:`オレンジ`,accentPurple:`パープル`,accentRed:`レッド`,styleClassic:`クラシック`,styleGlow:`グロー`,styleVibrant:`ビビッド`,themeToggleHint:`サイドバーのアイコンでダーク、ライト、システムモードを切り替えます。`,progressInTitle:`タブに印刷の進捗を表示`,progressInTitleDescription:`ブラウザのタブに進行中の印刷の進捗率と進捗リングを表示します。`,autoArchivePrints:`印刷を自動アーカイブ`,autoArchiveDescription:`印刷完了時に3MFファイルを自動保存`,saveThumbnailsDescription:`3MFファイルからプレビュー画像を抽出して保存`,captureFinishPhotoDescription:`印刷完了時にプリンターカメラから写真を撮影します。Bambuddy は印刷中に短いタイムラプスを記録し、ベッドが下がる前の瞬間から写真を取得できるようにします。この印刷でタイムラプスを有効にしていた場合はタイムラプスファイルが保存され、それ以外の場合は写真の取得後に自動的に削除されます。`,finishPhotoRestorePlate:`完了写真のためにプレートを戻す`,finishPhotoRestorePlateDescription:`プリンターは印刷終了時にビルドプレートを約 100 mm 下降させるため、完成した造形物がカメラの画角より下に来ます。Bambuddy はプレートを最終印刷レイヤーのすぐ上まで戻して写真を撮影し、その後再び下降させます。造形高さが不明な場合や次のジョブがキューにある場合はスキップされます。`,ffmpegNotInstalled:`ffmpegがインストールされていません`,ffmpegRequired:`カメラ撮影にはffmpegが必要です。<brew>brew install ffmpeg</brew>（macOS）または<apt>apt install ffmpeg</apt>（Linux）でインストールしてください。`,camera:`カメラ`,cameraViewMode:`カメラ表示モード`,cameraOverlayDescription:`メイン画面上にリサイズ可能なオーバーレイでカメラを表示`,cameraWindowDescription:`別のブラウザウィンドウでカメラを表示`,externalCamerasDescription:`内蔵プリンターカメラの代わりに外部カメラを設定。MJPEGストリーム、RTSP、HTTPスナップショット、USBカメラ（V4L2）をサポート。有効にすると、ライブビューと完了写真に外部カメラが使用されます。`,cameraPlaceholderUsb:`デバイスパス (/dev/video0)`,cameraPlaceholderUrl:`カメラURL (rtsp://... または http://...)`,cameraTypeMjpeg:`MJPEGストリーム`,cameraTypeRtsp:`RTSPストリーム`,cameraTypeSnapshot:`HTTPスナップショット`,cameraTypeUsb:`USBカメラ (V4L2)`,cameraSnapshotUrl:`スナップショットURL（任意）`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`通知サムネイル、終了写真、レイヤータイムラプスフレーム、プレート検出に使用される単一フレームURL。タイムラプスとプレート検出はそれぞれプリンターごとのトグルが必要 — このURLはアクティブ時の画像ソースに過ぎません。上記のライブストリームから取得する場合は空のままにします。go2rtc（/api/frame.jpeg）や専用スナップショットエンドポイントを持つIPカメラに便利です。`,cameraRotation:`回転`,test:`テスト`,connected:`接続済み`,disconnected:`未接続`,currency:`通貨`,defaultFilamentCost:`デフォルトフィラメントコスト（kg単価）`,electricityCost:`電気料金（kWh単価）`,energyDisplayMode:`エネルギー表示モード`,energyModePrintDescription:`ダッシュボードに印刷中の消費エネルギーの合計を表示`,energyModeTotalDescription:`ダッシュボードにスマートプラグの累計エネルギーを表示`,fileManager:`ファイルマネージャー`,createArchiveEntry:`印刷時にアーカイブエントリを作成`,createArchiveEntryDescription:`ファイルマネージャーから印刷時に、オプションでアーカイブエントリを作成`,lowDiskSpaceWarning:`ディスク容量不足の警告`,lowDiskSpaceDescription:`空きディスク容量がこのしきい値を下回った場合に警告を表示`,printerFirmware:`プリンターファームウェア`,checkFirmwareDescription:`Bambu Labのプリンターファームウェア更新を確認`,bambuddySoftware:`Bambuddyソフトウェア`,autoCheckDescription:`起動時に自動的に新しいバージョンを確認`,checkNow:`今すぐ確認`,updateAvailableVersion:`アップデート利用可能: v{{version}}`,releaseNotes:`リリースノート`,updateViaDocker:`Docker Composeでアップデート:`,composeDirectory:`Compose ディレクトリ`,composeDirectoryHint:`docker-compose.yml があるディレクトリ。空欄にすると cd を省略します。`,copyUpdateCommand:`更新コマンドをコピー`,updateViaHomeAssistant:`アップデートはHome Assistant Supervisorによって管理されます。Home Assistantの設定→アドオン→Bambuddyを開いて新しいバージョンをインストールしてください。`,updateViaWindowsInstaller:`Windowsインストールはインストーラーを再実行して更新します。下のリンクから新しいバージョンをダウンロードしてください — データ、設定、プリンターは保持されます。`,downloadWindowsInstaller:`v{{version}} のインストーラーをダウンロード`,installUpdate:`アップデートをインストール`,latestVersionRunning:`最新バージョンを使用しています`,failedToCheckUpdates:`アップデートの確認に失敗しました: {{error}}`,backupRestore:`バックアップと復元`,backupRestoreDescription:`設定のエクスポート/インポートとGitHubバックアップの設定`,goToBackup:`バックアップへ`,externalUrl:`外部URL`,externalUrlDescription:`Bambuddyがアクセス可能な外部URL。通知画像や外部連携に使用されます。`,bambuddyUrl:`BambuddyのURL`,externalUrlHint:`プロトコルとポートを含めてください（例: http://192.168.1.100:8000）`,ftpRetry:`FTPリトライ`,ftpRetryDescription:`プリンターのWi-Fiが不安定な場合にFTP操作をリトライ。3MFダウンロード、印刷アップロード、タイムラプスダウンロード、ファームウェア更新に適用。`,autoRetryDescription:`失敗したFTP操作を自動的にリトライ`,retryAttempts:`リトライ回数`,retryDelay:`リトライ遅延`,connectionTimeout:`接続タイムアウト`,time_one:`{{count}}回`,time_other:`{{count}}回`,second_one:`{{count}}秒`,second_other:`{{count}}秒`,nSeconds:`{{count}}秒`,increaseForWeakWifi:`Wi-Fiが弱いプリンター用に増やしてください`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Home Assistantに接続してHA REST API経由でスマートプラグを制御。switch、light、input_boolean、scriptエンティティをサポート。`,homeAssistantUrl:`Home Assistant URL`,longLivedAccessToken:`長期アクセストークン`,haTokenHint:`HAでトークンを作成: プロフィール → 長期アクセストークン → トークンを作成`,connectionSuccessful:`接続成功`,connectionFailed:`接続失敗`,haConnectionSuccess:`Home Assistantへの接続に成功しました。`,haConnectionFailed:`Home Assistantへの接続に失敗しました。`,mqttPublishing:`MQTTパブリッシュ`,mqttDescription:`Node-RED、Home Assistant、その他の自動化システムとの統合のため、外部MQTTブローカーにBamBuddyイベントをパブリッシュ。`,mqttEnableDescription:`外部MQTTブローカーにイベントをパブリッシュ`,brokerHostname:`ブローカーホスト名`,port:`ポート`,usernameOptional:`ユーザー名（オプション）`,passwordOptional:`パスワード（オプション）`,topicPrefix:`トピックプレフィックス`,topicPrefixHint:`トピック形式: {{prefix}}/printers/<serial>/status 等`,prometheusMetrics:`Prometheusメトリクス`,prometheusEndpointDescription:`Prometheus/Grafanaモニタリング用に<code>/api/v1/metrics</code>でプリンターメトリクスを公開。`,bearerTokenOptional:`Bearerトークン（オプション）`,bearerTokenHint:`設定時、リクエストに<code>Authorization: Bearer <token></code>が必要`,metricsConnectionStatus:`接続状態`,metricsPrinterState:`プリンター状態（idle/printing等）`,metricsPrintProgress:`印刷進捗 0-100%`,metricsBedTemp:`ベッド温度`,metricsNozzleTemp:`ノズル温度`,metricsPrintsTotal:`結果別の総印刷数`,metricsMore:`...その他（レイヤー、ファン、キュー、フィラメント使用量）`,smartPlugsDescription:`スマートプラグ（TasmotaまたはHome Assistant）を接続して、電源制御の自動化とプリンターのエネルギー使用量を追跡。`,allOn:`すべてオン`,allOff:`すべてオフ`,addSmartPlug:`スマートプラグを追加`,energySummary:`エネルギー概要`,currentPower:`現在の消費電力`,plugsOnline:`{{reachable}}/{{total}}プラグオンライン`,today:`今日`,yesterday:`昨日`,total:`合計`,enablePlugsForSummary:`プラグを有効にしてエネルギー概要を表示`,addNotificationProvider:`追加`,systemBadge:`(システム)`,creating:`作成中...`,changing:`変更中...`,deleteUserAndItems:`ユーザーとそのアイテムを削除`,deleteUserKeepItems:`ユーザーを削除、アイテムは保持（オーナーなしになります）`,ok:`OK`,twoFa:{totpTitle:`認証アプリ (TOTP)`,totpDesc:`Google Authenticator、Aegis、Authyなどのアプリを使用します。`,emailOtpTitle:`メールOTP`,emailOtpDesc:`ログイン時に{{email}}にワンタイムコードを送信します。`,emailOtpNoEmail:`この方法を有効にするには、アカウントにメールアドレスを追加してください。`,addEmailFirst:`アカウントにメールアドレスがありません。管理者に追加を依頼してください。`,setupTotp:`認証アプリを設定`,setupAuthApp:`認証アプリを設定`,setupInstructions:`認証アプリでQRコードをスキャンし、コードで確認してください。`,manualEntry:`スキャンできない場合は、このシークレットを手動で入力してください:`,scannedContinue:`コードをスキャンしました — 続ける`,enterCodeToConfirm:`認証アプリの6桁のコードを入力して設定を確認してください。`,activate:`有効化`,disableTotp:`認証アプリを無効化`,disableConfirmHint:`認証アプリを無効にするには、有効なTOTPコードまたはバックアップコードを入力してください。`,totpDisabled:`認証アプリが無効化されました。`,emailOtpEnabled:`メールOTPが有効化されました。`,emailOtpDisabled:`メールOTPが無効化されました。`,smtpRequired:`先にSMTP設定を構成してテストしてください。`,invalidCode:`無効なコードです。もう一度お試しください。`,enableEmailOtp:`メールOTPを有効化`,disableEmailOtp:`メールOTPを無効化`,emailSetupEnterCode:`確認コードがメールアドレスに送信されました。このメールボックスを所有していることを確認するために、以下に入力してください。`,verifyAndEnable:`確認して有効化`,emailDisablePasswordHint:`メールOTPの無効化を確認するには、アカウントのパスワードを入力してください。`,passwordPlaceholder:`パスワードを入力してください`,backupCodesTitle:`バックアップコードを保存`,backupCodesWarning:`これらのコードを安全な場所に保存してください。各コードは一度しか使用できません。`,backupCodesRemaining:`バックアップコード残り{{count}}個`,savedCodes:`コードを保存しました`,regenBackup:`バックアップコードを再生成`,regenBackupHint:`現在のTOTPコードを入力して10個の新しいバックアップコードを生成します。`,newBackupCodes:`新しいバックアップコード`,linkedAccounts:`リンクされたSSOアカウント`,linkedAccountsDesc:`これらの外部IDプロバイダーがあなたのアカウントにリンクされています。`,oidcUnlinked:`アカウントのリンクを解除しました。`},sessionPolicy:{title:`セッションポリシー`,description:`新しいユーザーログインの最大セッション有効期間。すでに発行されたトークンは元の有効期限を保持します。`,preset24h:`24時間`,preset7d:`7日`,preset30d:`30日`,customHoursLabel:`カスタムセッション有効期間（時間）`,hoursSuffix:`時間`,warning:`長いセッションは自動ログアウト保護を弱めます。信頼できる単一ユーザー環境でのみ推奨されます。`},oidc:{title:`SSO / OIDCプロバイダー`,desc:`シングルサインオン用のOpenID Connectプロバイダーを設定します。`,addProvider:`プロバイダーを追加`,newProvider:`新しいプロバイダー`,empty:`OIDCプロバイダーがまだ設定されていません。`,created:`プロバイダーが作成されました。`,updated:`プロバイダーが更新されました。`,deleted:`プロバイダーが削除されました。`,refreshIcon:`アイコンを再取得`,removeIcon:`アイコンを削除`,iconRefreshed:`アイコンを更新しました。`,iconRemoved:`アイコンを削除しました。`,iconFetchFailed:`プロバイダーURLからアイコンを取得できませんでした。`,deleteTitle:`プロバイダーを削除`,deleteMessage:`"{{name}}"を削除しますか？リンクされたすべてのユーザーアカウントが切断されます。`,form:{name:`表示名`,issuerUrl:`発行者URL`,clientId:`クライアントID`,clientSecret:`クライアントシークレット`,scopes:`スコープ`,iconUrl:`アイコンURL (任意)`,enabled:`有効`,autoCreate:`ユーザーを自動作成`,autoCreateDesc:`初回ログイン時にローカルアカウントを自動的に作成します。`,autoLink:`既存アカウントを自動リンク`,autoLinkDesc:`初回ログイン時にメールアドレスで既存のローカルアカウントにリンクします。`,secretHint:`空白のままで現在のものを維持`,secretPlaceholder:`新しいシークレット`,emailClaim:`メールクレーム`,emailClaimDesc:`メールIDとして使用するJWTクレーム。Azure Entra IDには'preferred_username'または'upn'を使用（email_verifiedを送信しない）。信頼できるクレーム名のみ使用してください。`,emailClaimPlaceholder:`メール`,emailClaimCustomClaimAutoLinkWarning:`カスタムクレームは、値がテナント管理されている場合（Azure Entra IDのupn / preferred_usernameなど）にのみ自動リンクに安全です。IdPがユーザーにこのクレームの自己宣言を許可している場合は、自動リンクを有効にしないでください。`,requireEmailVerified:`メール確認を要求`,requireEmailVerifiedDesc:`プロバイダーが確認済みとしてマークした場合にのみメールクレームを受け入れます。`,requireEmailVerifiedWarning:`警告：確認なしでメールが受け入れられます。信頼できるプロバイダーのみで使用してください。`,requireEmailVerifiedAutoLink:`この設定を変更するには、まず自動リンクを無効にしてください。`,defaultGroup:`デフォルトグループ`,defaultGroupDesc:`自動作成ユーザーに割り当てられるグループ。未設定の場合はViewersにフォールバックします。`,defaultGroupViewersFallback:`Viewers（デフォルト）`,autologin:`自動サインイン`,autologinDesc:`未認証の訪問者をこのプロバイダーに直接リダイレクトします。このフラグを付けられるプロバイダーは1つだけです。`}},encryption:{title:`MFA暗号化ステータス`,enabledFromEnv:`保存時の暗号化が有効（MFA_ENCRYPTION_KEY環境変数のキー）`,enabledFromFile:`保存時の暗号化が有効（データディレクトリから読み込んだキー）`,enabledGenerated:`保存時の暗号化が自動生成キーで有効`,notConfigured:`保存時の暗号化が設定されていません`,notConfiguredDesc:`TOTPシークレットとOIDCのclient_secretsは平文で保存されています。MFA_ENCRYPTION_KEYを設定するか、書き込み可能なデータディレクトリでBambuddyを再起動して自動生成してください。`,allEncrypted:`すべてのMFAシークレットは保存時に暗号化されています。`,legacyRowsLabel:`レガシー平文行`,encryptedRowsLabel:`暗号化された行`,legacyRowsWarning:`{{count}}件のレガシー平文行を検出。OIDCプロバイダーを再保存するか、ユーザーの認証アプリを再登録して暗号化ストレージへ移行してください。`,backupHint:`自動生成キーは DATA_DIR/.mfa_encryption_key に保存され、ローカルバックアップZIPに含まれます。バックアップを安全に保管するか、MFA_ENCRYPTION_KEYを明示的に設定してください。`,decryptionBrokenTitle:`暗号化キーが見つかりません`,decryptionBrokenError:`{{count}}件の暗号化レコードを復号できません。暗号化キーが見つかりません。以前のMFA_ENCRYPTION_KEYまたはDATA_DIR/.mfa_encryption_keyを復元してください。`,migrationErrorWarning:`{{count}} 件のレガシー行を起動時に再暗号化できませんでした。サーバーログを確認し、Bambuddy を再起動して再試行してください。`},pipelineLimits:{title:`スライサーパイプラインの上限`,maxCopiesLabel:`実行あたりの最大コピー数`,maxCopiesDesc:`パイプライン実行時にオペレーターが要求できるコピー数の上限。サーバー側の上限は 1000 です。`},pipelines:{title:`スライサーパイプライン`,subtitle:`再利用可能なプリセットバンドル（プリンター + プロセス + フィラメント + ベッドタイプ）。スライスダイアログから保存し、次のファイルにワンクリックで適用できます。`,loading:`パイプラインを読み込み中…`,loadError:`パイプラインを読み込めませんでした。`,confirmDelete:`このパイプラインを削除しますか？元に戻せません。`,staleWarning:`参照されているプリセットが見つかりません。スライスダイアログから再保存して修正してください。`,empty:{title:`パイプラインはまだありません。`,howto:`任意のファイルでスライスダイアログを開き、プリンター / プロセス / フィラメント / ベッドタイプを選んで「パイプラインとして保存」をクリックしてください。保存したパイプラインはここに表示されます。`},field:{name:`パイプライン名`,description:`説明`,targetPrinter:`対象プリンター`,noTarget:`— 対象なし —`,targetKind:`対象種別`,targetKindSpecific:`特定のプリンター`,targetKindClass:`プリンタークラス`,targetModelClass:`プリンターモデル`,fanoutStrategy:`分散戦略`,fanout:{max_parallel:`最大並列 — 一致する空きプリンターに分散`,round_robin:`ラウンドロビン — 適格なプリンター間で循環`,fill_one_first:`1台ずつ埋める — すべてのコピーを1台に固定`},fanoutShort:{max_parallel:`並列`,round_robin:`ラウンドロビン`,fill_one_first:`1台ずつ`}},action:{save:`保存`,cancel:`キャンセル`,rename:`名前変更`,delete:`削除`},slot:{printer:`プリンター`,process:`プロセス`,filament:`フィラメント`,filamentN:`フィラメント {{n}}`,filamentAll:`{{n}} スロットすべて`,bed:`ベッド`},group:{profiles:`プロファイル`,filaments:`フィラメント`},searchPlaceholder:`パイプラインを検索…`,filterTargetType:`対象種別でフィルター`,filterTarget:`対象でフィルター`,filter:{all:`すべての対象`,noTarget:`対象未設定`,count:`{{shown}} / {{total}}`,noMatches:`現在のフィルターに一致するパイプラインはありません。`},toast:{saved:`パイプラインを保存しました`,saveFailed:`保存に失敗しました`,deleted:`パイプラインを削除しました`,deleteFailed:`削除に失敗しました`},noTargetHint:`実行するには対象プリンターを設定してください`,noTargetWarning:`このパイプラインを実行する前に対象プリンターを設定してください。`,runs:{lastRun:`前回の実行`,status:{queued:`待機中`,slicing:`スライス中`,dispatching:`送信中`,in_progress:`印刷中`,completed:`完了`,failed:`失敗`,partial_failure:`部分的失敗`,cancelled:`キャンセル`}}}},notification:{printStarted:{title:`印刷開始`,body:`{{printer}}: {{filename}} の印刷を開始しました`},printCompleted:{title:`印刷完了`,body:`{{printer}}: {{filename}} が正常に完了しました`},printFailed:{title:`印刷失敗`,body:`{{printer}}: {{filename}} が失敗しました`},printStopped:{title:`印刷中止`,body:`{{printer}}: {{filename}} が中止されました`},printProgress:{title:`印刷進捗`,body:`{{printer}}: {{filename}} は {{percent}}% 完了`},printerOffline:{title:`プリンターオフライン`,body:`{{printer}} がオフラインです`},printerError:{title:`プリンターエラー`,body:`{{printer}} – {{error}}`},filamentLow:{title:`フィラメント残量低下`,body:`{{printer}}: フィラメントが残りわずかです`},maintenanceDue:{title:`メンテナンス期限`,body:`{{printer}}: {{items}} の対応が必要です`}},errors:{generic:`問題が発生しました`,networkError:`ネットワークエラーです。接続を確認してください。`,notFound:`見つかりません`,unauthorized:`認証エラー`,serverError:`サーバーエラー`,validationError:`入力内容を確認してください`,printerConnectionFailed:`プリンターへの接続に失敗しました`,saveFailed:`保存に失敗しました`,deleteFailed:`削除に失敗しました`,loadFailed:`データの読み込みに失敗しました`},hmsErrors:{title:`エラー - {{name}}`,noErrors:`エラーなし`,viewOnWiki:`Bambu Lab Wikiで表示`,mqttVerifyFailedRemedy:`プリンターで開発者モードを有効にし、プリンターを再起動してから、ジョブをもう一度開始してください。`,unknownCode:`不明なHMSコード — 詳細はBambu Lab Wikiを参照してください。`,clearInstructions:`プリンターでエラーをクリアするとここからも消えます。`,clearErrors:`エラーをクリア`,clearSuccess:`HMSエラーをクリアしました`,clearFailed:`HMSエラーのクリアに失敗しました`,actionSuccess:`アクションをプリンターに送信しました`,actionFailed:`アクションの送信に失敗しました`,runoutExpectedSlot:`{{ranOut}} のフィラメントが切れました。プリンターは現在 {{expected}} に対応するフィラメントを待っています。{{expected}} にスプールをセットして、「再試行」を選択してください。`,runoutExpectedSlotOnly:`プリンターは {{expected}} に対応するフィラメントを待っています。そこにスプールをセットして、「再試行」を選択してください。`,runoutSlotUnknown:`フィラメントが切れて印刷が一時停止しています。プリンターが現在要求しているスロットを Bambuddy が特定できませんでした。プリンターの画面で要求されているスロットを確認してください。`,actions:{RESUME_PRINTING:`印刷を再開`,RESUME_PRINTING_DEFECTS:`再開（不具合を許容）`,RESUME_PRINTING_PROBELM_SOLVED:`再開（問題解決）`,STOP_PRINTING:`印刷を停止`,CHECK_ASSISTANT:`アシスタントを開く`,FILAMENT_EXTRUDED:`フィラメント排出済み、続行`,RETRY_FILAMENT_EXTRUDED:`まだ排出されていない、再試行`,CONTINUE:`完了、続行`,LOAD_VIRTUAL_TRAY:`フィラメントを装填`,OK_BUTTON:`OK`,FILAMENT_LOAD_RESUME:`フィラメント装填完了、再開`,JUMP_TO_LIVEVIEW:`ライブビューを表示`,NO_REMINDER_NEXT_TIME:`次回は通知しない`,REFRESH_NOZZLE:`再確認`,IGNORE_NO_REMINDER_NEXT_TIME:`無視して次回は通知しない`,IGNORE_RESUME:`無視して再開`,PROBLEM_SOLVED_RESUME:`問題解決、再開`,TURN_OFF_FIRE_ALARM:`了解、火災警報をオフ`,RETRY_PROBLEM_SOLVED:`再試行（問題解決）`,CANCLE:`キャンセル`,STOP_DRYING:`乾燥を停止`,PROCEED:`続行`,OK_JUMP_RACK:`OK`,ABORT:`中止`,DISABLE_PURIFICATION:`この印刷では空気清浄を無効化`,DONT_REMIND_NEXT_TIME:`今後表示しない`,DBL_CHECK_CANCEL:`キャンセル`,DBL_CHECK_DONE:`完了`,DBL_CHECK_RETRY:`再試行`,DBL_CHECK_RESUME:`再開`,DBL_CHECK_OK:`確認`,REMOVE_CLOSE_BTN:`閉じる`}},mqttDebug:{title:`MQTTデバッグログ`,searchPlaceholder:`トピックまたはペイロードで検索...`,noMessages:`まだメッセージが記録されていません`,startLoggingHint:`「ログ開始」をクリックしてMQTTメッセージのキャプチャを開始`,noMessagesMatch:`フィルターに一致するメッセージがありません`,adjustFilterHint:`検索条件やフィルター条件を調整してみてください`,incoming:`受信`,outgoing:`送信`,loggingStopped:`ログ記録停止`,loggingActive:`ログ記録中 - メッセージは自動更新されます`,startLogging:`ログ記録を開始`,stopLogging:`ログ停止`,clearLog:`ログをクリア`,topic:`トピック`,timestamp:`タイムスタンプ`,direction:`方向`,all:`すべて`},printerFiles:{zipStarted_one:`{{count}} 個のファイルの ZIP ダウンロードを開始しました`,zipStarted_other:`{{count}} 個のファイルの ZIP ダウンロードを開始しました`,zipPartial:`{{total}} 個中 {{successful}} 個のファイルで ZIP ダウンロードを開始しました。残りは取得できませんでした`,downloadFailed:`ダウンロードに失敗しました: {{error}}`,unknownError:`不明なエラー`,shiftSelectHint:`Shift キーを押しながらクリックして範囲を選択`,selectFile:`{{name}} を選択`,deselectFile:`{{name}} の選択を解除`,title:`ファイル管理`,storageUsed:`使用中:`,storageFree:`空き:`,filterPlaceholder:`ファイルを検索...`,deleteButton:`削除`,deleteFiles:`{{count}}件のファイルを削除`,deleteFileConfirm:`"{{name}}" を削除しますか？この操作は取り消せません。`,deleteFilesConfirm:`選択した{{count}}件のファイルを削除しますか？元に戻せません。`,noFiles:`このディレクトリにファイルがありません`,printerUnavailable:`プリンターのファイルサービスを利用できません。プリンターに接続できる状態で再試行してください。`,loadingFiles:`ファイルを読み込み中...`,failedToLoad:`ファイルの読み込みに失敗しました`,toast:{filesDeleted:`{{count}}件のファイルを削除しました`,deleteFailed:`削除に失敗: {{error}}`}},confirm:{delete:`削除しますか？`,unsavedChanges:`保存されていない変更があります。このページを離れますか？`,clearQueue:`キューをクリアしますか？`},login:{title:`Bambuddy ログイン`,subtitle:`アカウントにサインイン`,username:`ユーザー名`,usernamePlaceholder:`ユーザー名を入力`,usernameOrEmail:`ユーザー名またはメール`,usernameOrEmailPlaceholder:`ユーザー名または @ メール`,password:`パスワード`,passwordPlaceholder:`パスワードを入力`,signIn:`サインイン`,signingIn:`ログイン中...`,rememberMe:`ログイン状態を保持する`,forgotPassword:`パスワードをお忘れですか？`,autologinFailed:`SSOへの自動サインインに失敗しました。下から続行するプロバイダーを選択してください。`,localDisabledNotice:`ローカルサインインは無効化されています。下のSSOプロバイダーをご利用ください。`,loginSuccess:`ログインしました`,loginFailed:`ログインに失敗しました`,enterCredentials:`ユーザー名とパスワードを入力してください`,enterEmail:`メールアドレスを入力してください`,oidcLoginFailed:`OIDCログインに失敗しました`,oidcErrors:{providerError:`IDプロバイダーがエラーを返しました`,missingParameters:`OIDCコールバックに必須パラメーターがありません`,invalidState:`OIDCの状態が無効か、すでに使用されています`,stateExpired:`OIDCログインセッションが期限切れです。もう一度お試しください`,providerNotFound:`OIDCプロバイダーが見つかりません`,discoveryFailed:`OIDCディスカバリードキュメントの取得に失敗しました`,invalidDiscovery:`OIDCディスカバリードキュメントが無効です`,networkError:`OIDCトークン交換中にネットワークエラーが発生しました`,badResponse:`OIDCトークン交換中に予期しない応答を受信しました`,noIdToken:`OIDCプロバイダーがIDトークンを返しませんでした`,validationFailed:`OIDCトークンの検証に失敗しました`,nonceMismatch:`OIDCノンスが一致しません。リプレイ攻撃の可能性があります`,missingSubClaim:`OIDCトークンにsubクレームがありません`,noLinkedAccount:`このOIDCアイデンティティに関連付けられたローカルアカウントがありません`,accountInactive:`あなたのアカウントは無効です`,userResolutionFailed:`アカウントを解決できませんでした`,internalError:`OIDCログイン中に内部エラーが発生しました`,tokenExchangeFailed:`OIDCトークン交換に失敗しました`},forgotPasswordTitle:`パスワードを忘れた場合`,forgotPasswordMessage:`パスワードを忘れた場合は、システム管理者に連絡してリセットしてもらってください。`,forgotPasswordEmailMessage:`メールアドレスを入力すると、新しいパスワードを送信します。`,emailAddress:`メールアドレス`,emailPlaceholder:`your.email@example.com`,cancel:`キャンセル`,sending:`送信中...`,sendResetEmail:`リセットメールを送信`,howToReset:`パスワードのリセット方法：`,resetStep1:`Bambuddy管理者に連絡`,resetStep2:`ユーザー管理でパスワードリセットを依頼`,resetStep3:`管理者が新しい仮パスワードを設定`,resetStep4:`新しいパスワードでログインし、設定で変更`,gotIt:`了解`,twoFA:{title:`二段階認証`,subtitle:`アカウントは二段階認証で保護されています。確認コードを入力してください。`,methodAuthenticator:`認証アプリ`,methodEmail:`メール認証`,methodBackup:`バックアップコード`,instructionsTotp:`認証アプリを開いて、Bambuddy用の6桁のコードを入力してください。`,instructionsEmail:`6桁の確認コードをメールアドレスに送信しました。有効期限は10分です。`,instructionsEmailNotSent:`下のボタンをクリックして、メールで確認コードを受け取ってください。`,instructionsBackup:`8文字のバックアップコードをいずれか1つ入力してください。各コードは1回のみ使用可能です。`,sendCodeButton:`メールでコードを送信する`,sendingCode:`送信中...`,resendCode:`コードを再送する`,codeLabel:`確認コード`,backupCodeLabel:`バックアップコード`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`確認する`,verifyingButton:`確認中...`,backToLogin:`← ログイン画面に戻る`,orContinueWith:`または以下でログイン`,signInWith:`{{provider}}でログイン`,enterCode:`確認コードを入力してください`,sendCodeFailed:`確認コードの送信に失敗しました`,invalidCode:`無効なコードです。もう一度お試しください。`},resetPassword:{title:`新しいパスワードを設定`,subtitle:`下のフィールドに新しいパスワードを入力して確認してください。`,newPassword:`新しいパスワード`,newPasswordPlaceholder:`8文字以上`,confirmPassword:`パスワードの確認`,confirmPasswordPlaceholder:`新しいパスワードを再入力`,saving:`保存中…`,submit:`新しいパスワードを設定`,backToLogin:`ログインに戻る`,passwordsDoNotMatch:`パスワードが一致しません`,passwordTooShort:`パスワードは8文字以上で入力してください`,resetFailed:`パスワードのリセットに失敗しました。リンクが期限切れの可能性があります。`}},setup:{title:`Bambuddy セットアップ`,subtitle:`Bambuddyインスタンスの認証を設定`,enableAuth:`認証を有効化`,adminAccount:`管理者アカウント`,adminAccountDesc:`既に管理者ユーザーが存在する場合、既存の管理者アカウントを使用して認証が有効化されます。既存の管理者を使用する場合は下のフィールドを空のままにするか、新しい認証情報を入力して新しい管理者ユーザーを作成してください。`,adminUsername:`管理者ユーザー名`,adminPassword:`管理者パスワード`,optionalIfAdminExists:`（管理者ユーザーが存在する場合は任意）`,adminUsernamePlaceholder:`管理者ユーザー名を入力（任意）`,adminPasswordPlaceholder:`管理者パスワードを入力（任意）`,confirmPassword:`パスワードの確認`,confirmPasswordPlaceholder:`パスワードを確認`,settingUp:`セットアップ中...`,completeSetup:`セットアップを完了`,toast:{authEnabledAdminCreated:`認証が有効になり、管理者ユーザーが作成されました`,authEnabledExistingAdmins:`既存の管理者ユーザーを使用して認証が有効になりました`,setupCompleted:`セットアップが完了しました`,enterBothCredentials:`管理者のユーザー名とパスワードの両方を入力するか、既存の管理者を使用する場合は両方を空にしてください`,passwordsDoNotMatch:`パスワードが一致しません`,passwordTooShort:`パスワードは6文字以上必要です`}},changePassword:{title:`パスワードを変更`,currentPassword:`現在のパスワード`,currentPasswordPlaceholder:`現在のパスワードを入力`,newPassword:`新しいパスワード`,newPasswordPlaceholder:`新しいパスワードを入力（6文字以上）`,confirmPassword:`新しいパスワード確認`,confirmPasswordPlaceholder:`パスワードを確認`,passwordsDoNotMatch:`パスワードが一致しません`,passwordTooShort:`パスワードは6文字以上必要です`,changing:`変更中...`,success:`パスワードを変更しました`,failed:`パスワードの変更に失敗しました`},plateAlert:{title:`印刷が一時停止されました！`,message:`ビルドプレート上にオブジェクトが検出されました。印刷が自動的に一時停止されました。プレートをクリアして印刷を再開してください。`,understand:`了解`},camera:{title:`カメラビュー`,invalidPrinterId:`無効なプリンターID`,live:`ライブ`,snapshot:`スナップショット`,restartStream:`ストリームを再開`,refreshSnapshot:`スナップショットを更新`,fullscreen:`フルスクリーン`,exitFullscreen:`フルスクリーンを終了`,connectingToCamera:`カメラに接続中...`,capturingSnapshot:`スナップショットを撮影中...`,connectionLost:`接続が切断されました`,connectionFailed:`カメラ接続に失敗しました`,reconnecting:`{{countdown}}秒後に再接続... (試行 {{attempt}}/{{max}})`,reconnectNow:`今すぐ再接続`,cameraUnavailable:`カメラが利用できません`,cameraUnavailableDesc:`プリンターの電源がオンで接続されていることを確認してください。`,noCamera:`カメラがありません`,retry:`再試行`,cameraStream:`カメラストリーム`,zoomOut:`ズームアウト`,zoomIn:`ズームイン`,resetZoom:`ズームをリセット`,recording:`録画中`,startRecording:`録画開始`,stopRecording:`録画停止`,chamberLight:`チャンバーライト切替`,unavailable:`カメラは利用できません`,diagnose:{button:`診断`,modalTitle:`カメラ診断`,running:`診断を実行中...`,runFailed:`診断を実行できませんでした: {{error}}`,retry:`再実行`,stage:{tcp_reachable:`ネットワーク到達性`,first_frame:`フレーム取得`,live_stream_active:`ライブストリーム動作中`},summary:{all_ok:`カメラは正常に動作しています。診断のすべての段階が成功しました。`,live_stream_active_healthy:`カメラは現在新しいフレームを配信しています — テストは不要です。`,printer_unreachable:`プリンターに到達できません。IPアドレス、ネットワーク接続、プリンターの電源が入っていることを確認してください。`,camera_port_closed:`プリンターには到達できますが、カメラポートが閉じています。プリンター設定でLANのみモードと開発者モードが有効になっていることを確認してください。`,no_frame:`カメラに接続できましたがフレームを受信できませんでした。再試行するか、プリンター設定でカメラが有効になっていることを確認してください。`,unknown_failure:`カメラ診断が不明な理由で失敗しました。詳細はサポートログを確認してください。`},meta:{protocol:`プロトコル`,port:`ポート`,profile:`プロファイル`}}},groups:{title:`グループ管理`,subtitle:`アクセス制御の権限グループを管理`,backToSettings:`設定に戻る`,createGroup:`グループを作成`,noPermission:`このページにアクセスする権限がありません。`,system:`システム`,noDescription:`説明なし`,usersCount:`{{count}}人のユーザー`,permissionsCount:`{{count}}個の権限`,edit:`編集`,delete:`削除`,toast:{created:`グループを作成しました`,updated:`グループを更新しました`,deleted:`アーカイブを削除しました`,enterGroupName:`グループ名を入力`},modal:{editGroup:`グループを編集`,createGroup:`グループを作成`,cancel:`キャンセル`,saving:`保存中...`,creating:`作成中...`,saveChanges:`変更を保存`},form:{groupName:`グループ名`,groupNamePlaceholder:`グループ名を入力`,systemGroupWarning:`システムグループ名は変更できません`,description:`説明`,descriptionPlaceholder:`説明を入力（任意）`,permissions:`権限 ({{count}} 選択中)`},deleteModal:{title:`グループを削除`,message:`このグループを削除しますか？このグループのユーザーはこれらの権限を失います。`,confirm:`確認`},editor:{title:`グループを編集`,createTitle:`グループを作成`,search:`権限を検索...`,selectAll:`すべて選択`,clearAll:`すべて解除`,permissionsSelected:`{{count}}件選択`,noResults:`検索に一致する権限がありません`,websocketHint:`ライブ更新に必要です。この権限がないと、インターフェースは定期的なポーリングに切り替わります。`}},users:{title:`ユーザー管理`,subtitle:`ユーザーとBambuddyインスタンスへのアクセスを管理`,backToSettings:`設定に戻る`,createUser:`ユーザーを作成`,noPermission:`このページにアクセスする権限がありません。`,admin:`管理者`,noGroups:`グループなし`,active:`アクティブ`,inactive:`非アクティブ`,edit:`編集`,delete:`削除`,system:`システム`,noGroupsAvailable:`利用可能なグループがありません`,table:{username:`ユーザー名`,groups:`グループ`,status:`ステータス`,actions:`アクション`},toast:{created:`ユーザーを作成しました`,updated:`ユーザーを更新しました`,deleted:`アーカイブを削除しました`,fillRequired:`必須項目をすべて入力してください`,passwordsDoNotMatch:`パスワードが一致しません`,passwordTooShort:`パスワードは6文字以上必要です`,ldapProvisioned:`LDAPユーザー「{{username}}」をプロビジョニング`},modal:{createUser:`ユーザーを作成`,editUser:`ユーザーを編集`,cancel:`キャンセル`,creating:`作成中...`,saving:`保存中...`,saveChanges:`変更を保存`,advancedAuthSubtitle:`高度な認証を使用`,tabsAriaLabel:`ユーザーソース`,localTab:`ローカル`,ldapTab:`LDAP`,ldapSearchLabel:`ディレクトリを検索`,ldapSearchPlaceholder:`ユーザー名、名前、またはメールアドレスを入力...`,ldapMinChars:`検索するには2文字以上入力してください`,ldapTypeToSearch:`LDAPディレクトリを検索するには入力を開始`,ldapSearching:`ディレクトリを検索中...`,ldapNoResults:`ディレクトリに一致するユーザーがいません`,ldapSearchError:`ディレクトリ検索に失敗。LDAPサーバーの状態を確認してください。`,ldapAlreadyProvisioned:`プロビジョニング済み`,ldapSelectedLabel:`選択中`,ldapProvision:`ユーザーをプロビジョニング`,ldapProvisioning:`プロビジョニング中...`,ldapErrorProvision:`プロビジョニングに失敗。LDAPサーバーの状態を確認して再試行してください。`},form:{username:`ユーザー名`,usernamePlaceholder:`ユーザー名を入力`,email:`メール`,emailPlaceholder:`user@example.com`,password:`パスワード`,passwordPlaceholder:`パスワードを入力`,confirmPassword:`パスワードの確認`,confirmPasswordPlaceholder:`パスワードを確認`,newPasswordPlaceholder:`新しいパスワードを入力`,confirmNewPasswordPlaceholder:`新しいパスワードを確認`,leaveBlankToKeep:`（現在のパスワードを維持する場合は空白）`,groups:`グループ`,optional:`オプション`,autoGeneratedPassword:`安全なパスワードが自動的に生成され、ユーザーにメールで送信されます。`,passwordManagedByAdvancedAuth:`パスワードは高度な認証によって管理されています。「パスワードのリセット」を使用して、メールで新しいパスワードをユーザーに送信してください。`,resetPassword:`パスワードのリセット`,resettingPassword:`パスワードをリセット中...`},deleteModal:{title:`ユーザーを削除`,message:`このユーザーを削除してもよろしいですか？この操作は元に戻せません。`,confirm:`ユーザーを削除`}},streamOverlay:{title:`ストリームオーバーレイ`,invalidPrinterId:`無効なプリンターID`,cameraStream:`カメラストリーム`,progress:`進捗`,eta:`残り時間`,printerIdle:`プリンター待機中`,printerOffline:`プリンターオフライン`,builder:{title:`ストリームオーバーレイ`,description:`ストリームオーバーレイのURLを作成します。全画面のカメラ映像に印刷中の情報を重ねて表示するもので、OBSや壁掛けディスプレイなどのブラウザソースで使えます。表示する項目を選んでURLをコピーしてください。`,printer:`プリンター`,size:`文字サイズ`,sizeSmall:`小`,sizeMedium:`中`,sizeLarge:`大`,fps:`フレームレート`,fpsHint:`A1およびP1のカメラは、指定した値にかかわらず毎秒5フレーム程度が上限です。`,token:`ストリームオーバーレイトークン（任意）`,tokenHint:`ログインを有効にしている場合のみ必要です。OBS自体はセッションを持ちません。上の欄でストリームオーバーレイのスコープを選んで作成してください。`,tokenWarning:`このURLにはトークンが含まれます。URLを読める人は誰でも映像とファイル名を見られます。アクセスを止めるにはトークンを失効させてください。`,fields:`表示する項目`,fieldPrinter:`プリンター名`,fieldFilename:`ファイル名`,fieldStatus:`ステータス`,fieldProgress:`進捗バー`,fieldLayers:`レイヤー数`,fieldEta:`残り時間と終了予定時刻`,fieldCamera:`カメラ映像`,chamberHint:`チャンバー温度は実際のセンサーを備えたモデルでのみ表示されます。P1およびA1は意味のない値を返すため除外されます。`,urlTitle:`オーバーレイURL`,open:`開く`,showPreview:`プレビューを表示`,hidePreview:`プレビューを非表示`,previewTitle:`オーバーレイのプレビュー`},status:{printing:`印刷中`,paused:`一時停止`,finished:`完了`,failed:`失敗`,idle:`待機中`,unknown:`不明`}},profiles:{title:`フィラメントプロファイル`,subtitle:`スライサープリセットと圧力キャリブレーションの管理`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`ローカルプロファイル`,kprofiles:`Kプロファイル`},orcaCloud:{connectedAs:`接続中`,connectedShort:`Orca Cloudに接続済み`,logout:`切断`,noLogoutPermission:`切断する権限がありません`,noConnectPermission:`Orca Cloudに接続する権限がありません`,retry:`再試行`,connectButton:`Orca Cloudに接続`,connect:{title:`Orca Cloudに接続`,description:`Orca Cloudアカウントにサインインして、スライサープロファイルをBambuddyに同期します。`},device:{title:`Orca CloudでBambuddyを承認`,instruction:`Orca Cloudを開いてこのコードを承認してください。承認するとBambuddyが自動的に接続されます。`,codeLabel:`ペアリングコード`,openButton:`Orca Cloud承認ページを開く`,manualHint:`または {{url}} にアクセスして、上記のコードを入力してください。`,waiting:`承認をお待ちしています…`,cancel:`キャンセル`},profiles:{title:`Orca Cloudプロファイル ({{count}})`,refresh:`更新`,empty:`Orca Cloudアカウントにまだプロファイルがありません。`},toast:{disconnected:`Orca Cloudから切断しました`},errors:{startFailed:`Orca Cloudのサインインを開始できませんでした。`,denied:`Orca Cloudでペアリングが拒否されました。`,expired:`ペアリングコードの有効期限が切れました。「接続」をクリックしてもう一度お試しください。`,pollFailed:`承認の待機中に接続が失われました。もう一度お試しください。`}},localProfiles:{title:`ローカルプロファイル`,subtitle:`OrcaSlicerからスライサープリセットをインポート・管理`,import:`プロファイルをインポート`,importDesc:`.bbscfg、.bbsflmt、.orca_filament、.zip、.jsonファイルをここにドロップ`,importing:`インポート中...`,search:`ローカルプリセットを検索...`,noPresets:`ローカルプリセットがまだありません`,noSearchResults:`検索に一致するプリセットがありません`,badge:`ローカル`,edit:`編集`,delete:`削除`,cancel:`キャンセル`,deleteConfirmTitle:`プリセットを削除`,deleteConfirm:`このプリセットを削除してもよろしいですか？元に戻せません。`,source:`ソース`,inheritsFrom:`継承元`,filamentType:`タイプ`,vendor:`メーカー`,compatiblePrinters:`プリンター`,nozzleTemp:`ノズル温度`,cost:`コスト`,density:`密度`,pressureAdvance:`プレッシャーアドバンス`,filament:`フィラメント`,process:`プロセス`,printer:`プリンター`,toast:{importSuccess:`{{count}}件のプリセットをインポートしました`,importSkipped:`{{count}}件のプリセットをスキップしました（重複）`,importError:`インポート中に{{count}}件のエラーが発生しました`,deleted:`プリセットを削除しました`,updated:`プリセットを更新しました`}},connectedAs:`接続中:`,signInExpiredTitle:`Bambu Cloud のサインインの有効期限が切れました`,signInExpiredBody:`保存されたトークンは Bambu Lab に受け付けられなくなりました。クラウドプロファイル、MakerWorld のインポート、ファームウェア確認を復元するには、再度サインインしてください。`,logout:`ログアウト`,noLogoutPermission:`ログアウトする権限がありません`,failedToLoad:`ファイルの読み込みに失敗しました`,retry:`リトライ`,time:{justNow:`たった今`,minsAgo:`{{count}}分前`,hoursAgo:`{{count}}時間前`,daysAgo:`{{count}}日前`},toast:{loggedOut:`ログアウトしました`},login:{title:`Bambuddy ログイン`,subtitle:`アカウントにサインイン`,email:`メールアドレス`,password:`パスワード`,region:`リージョン`,regionGlobal:`グローバル`,regionChina:`中国`,verificationCode:`認証コード`,totpCode:`認証アプリコード`,checkEmail:`メール ({{email}}) に届いた6桁のコードを入力してください`,enterTotpHint:`認証アプリの6桁のコードを入力してください`,accessToken:`アクセストークン`,accessTokenHint:`Bambu Cloud のアクセストークンを貼り付けてください。中国リージョンのアカウントはこの方法のみ利用可能です（電話番号認証のためメールログイン不可）。トークンの取得方法は MakerWorld の Cookie から（Wiki を参照）。`,back:`戻る`,loginButton:`ログイン`,verifyButton:`認証`,setTokenButton:`トークンを設定`,useToken:`アクセストークンを使用`,captchaTitle:`Bambu Cloud が CAPTCHA を要求しています`,captchaBody:`Bambu がサインインを受け付ける前にネットワークへ CAPTCHA を要求しており、この認証は Bambuddy からは応答できません。メールアドレスやパスワードの問題ではありません。ブロックはグローバル IP アドレスに紐づいており、通常は数時間で自動的に解除されます。繰り返し再試行すると解除が遅くなります。今すぐサインインするには、ブラウザーのセッションから取得したアクセストークンを使用してください。`,useEmail:`メールでログイン`,toast:{loggedIn:`ログインしました`,codeSent:`メールに認証コードを送信しました`,enterTotp:`認証アプリのコードを入力してください`,tokenSet:`トークンを設定しました`}},presets:{myPreset:`マイプリセット（編集可能）`,duplicate:`複製`,editable:`編集可能`,failedToLoadDetails:`プリセットの詳細を読み込めませんでした`,deleteConfirm:`このプロファイルを削除しますか？`,deleteWarning:`「{{name}}」をBambu Cloudから完全に削除します。元に戻せません。`,noDuplicatePermission:`プリセットを複製する権限がありません`,noEditPermission:`プリセットを編集する権限がありません`,noDeletePermission:`プロジェクトを削除する権限がありません`,types:{filament:`フィラメント`,printer:`プリンター`,process:`プロセス`},toast:{deleted:`アーカイブを削除しました`,created:`プリセットを作成しました`,updated:`プリセットを更新しました`,duplicated:`プリセットを複製しました`,fieldAdded:`フィールド "{{key}}" を追加しました`,exported:`プリセットをエクスポートしました`},baseLabel:`ベース: {{name}}`,currentLabel:`現在: {{name}}`,newPreset:`新規プリセット`,editPreset:`プリセットを編集`,duplicatePreset:`プリセットを複製`,createNewPreset:`新しいプリセットを作成`,customizeSettings:`新しいプリセットの設定をカスタマイズ`,compareWithBase:`ベースプリセットと比較`,compare:`比較`,basePreset:`ベースプリセット`,selectBasePreset:`ベースプリセットを選択...`,presetName:`プリセット名`,myCustomPreset:`カスタムプリセット`,inheritsFrom:`継承元:`,dropJsonToImport:`JSONファイルをドロップしてインポート`,tabs:{common:`一般`,allFields:`すべてのフィールド`},availableFields:`利用可能なフィールド`,searchFieldsPlaceholder:`フィールドを検索...`,noMatchingFields:`一致するフィールドがありません`,allFieldsAdded:`すべてのフィールドが追加済みです`,addCustomField:`カスタムフィールドを追加`,yourOverrides:`オーバーライド一覧`,noOverridesYet:`オーバーライドはまだありません`,clickFieldsToAdd:`左のフィールドをクリックして追加`,saveAsTemplate:`テンプレートとして保存`,jsonTip:`ヒント: .jsonファイルをこのモーダルにドラッグ＆ドロップして設定をインポート`},cloudView:{searchPlaceholder:`プリセットを検索...`,templates:`テンプレート`,refresh:`更新`,newPreset:`新規プリセット`,clearFilters:`フィルターをクリア`,compareMode:`比較モード`,selectAnotherPreset:`同じタイプ（{{type}}）の別のプリセットを選択`,clickTwoPresets:`同じタイプのプリセットを2つクリックして比較`,selectFirst:`1. 最初を選択`,selectSecond:`2. 2番目を選択`,compareNow:`比較を実行`,lastSynced:`最終同期:`,showingCount:`{{total}} 件中 {{showing}} 件のプリセットを表示`,noPresetsFound:`プリセットが見つかりません`,columns:{filament:`フィラメント`,process:`プロセス`,printer:`プリンター`},noFilamentPresets:`フィラメントプリセットなし`,noProcessPresets:`プロセスプリセットなし`,noPrinterPresets:`プリンタープリセットなし`,filters:{type:`種類`,owner:`所有者`,printer:`プリンター`,nozzle:`ノズル`,filament:`フィラメント`,layer:`レイヤー`,all:`すべて`,myPresets:`マイプリセット`,builtIn:`ビルトイン`,process:`プロセス`},noTemplatesPermission:`テンプレートを管理する権限がありません`,noRefreshPermission:`プロファイルを更新する権限がありません`,noCreatePermission:`プロジェクトを作成する権限がありません`},templates:{title:`フィラメントプロファイル`,noTemplates:`テンプレートがありません。バックエンドを再起動してデフォルトテンプレートを作成してください。`,createFirst:`プリセットエディタからテンプレートを作成`,typeFilter:`タイプ:`,deleteTitle:`テンプレートを削除`,deleteWarning:`この操作は元に戻せません`,deleteConfirm:`"{{name}}" を削除しますか？`,namePlaceholder:`テンプレート名`,descriptionPlaceholder:`説明`,settingsJson:`設定 (JSON)`,fieldsCount:`{{count}}フィールド`,shownInModals:`モーダルに表示`,hiddenInModals:`モーダルで非表示`,apply:`適用`,toast:{deleted:`アーカイブを削除しました`,updated:`テンプレートを更新しました`,created:`テンプレートを作成しました`,applied:`テンプレートを適用しました`}}},support:{debugLoggingActive:`デバッグログが有効です`,manageLogs:`管理`,collectItem7:`プリンター接続状態とファームウェアバージョン`,collectItem8:`連携状態（Spoolman、MQTT、HA）`,collectItem9:`ネットワークインターフェース（サブネットのみ）`,collectItem10:`Pythonパッケージバージョン`,collectItem11:`データベース健全性チェック`,collectItem12:`Docker環境の詳細`,bundleGenerating:`バンドルを生成中...`,bundleStepConnection:`プリンターの接続確認を実行中`,bundleStepVirtualPrinters:`仮想プリンターのセットアップ確認を実行中`,bundleStepLogScan:`最近のログから既知の問題をスキャン中`,bundleStepBuild:`サポートバンドル ZIP を作成中`},fileManager:{variants:{badge:`{{count}}個のバージョン`,groupAction:`バージョンとしてグループ化`,groupTooltip:`これらのファイルを、異なるプリンター向けにスライスした同一ジョブとして扱います`,grouped:`{{count}}個のファイルをバージョンとしてグループ化しました`,printAlternatives:`印刷（{{count}}件の候補）`},title:`ファイル管理`,subtitle:`印刷ファイルの整理と管理`,uploadFiles:`ファイルをアップロード`,newFolder:`新しいフォルダ`,folderName:`フォルダ名`,folderNamePlaceholder:`例: 機能パーツ`,renameFile:`ファイル名を変更`,renameFolder:`フォルダ名を変更`,invalidFilenameChar:`印刷ファイル名に "{{char}}" は使用できません。プリンターのSDカードは次の文字を拒否します: < > : " / \\ | ? *`,moveFiles:`{{count}}件のファイルを移動`,rootNoFolder:`ルート（フォルダなし）`,current:`（現在）`,linkFolder:`フォルダをリンク`,linkFolderDescription:`「{{name}}」をプロジェクトまたはアーカイブにリンクしてすばやくアクセス。`,project:`プロジェクト`,archive:`アーカイブ`,noProjectsFound:`プロジェクトが見つかりません`,noArchivesFound:`アーカイブが見つかりません`,unlink:`リンク解除`,link:`リンク`,dragDropFiles:`ファイルをここにドラッグ＆ドロップ`,dropFilesHere:`ここにファイルをドロップ`,releaseToUpload:`離してアップロード`,orClickToBrowse:`またはクリックして選択`,allFileTypesSupported:`すべてのファイルタイプに対応。ZIPファイルは展開されます。`,zipFilesDetected:`ZIPファイルを検出`,zipExtractOptions:`ZIPファイルは展開されます。フォルダー構造の処理方法を選択：`,preserveZipStructure:`ZIPのフォルダ構造を保持`,createFolderFromZip:`ZIPファイル名からフォルダーを作成`,stlThumbnailGeneration:`STLサムネイル生成`,zipMayContainStl:`ZIPファイルにSTLファイルが含まれている場合があります。展開時にサムネイルを生成できます。`,thumbnailsCanBeGenerated:`STLファイルのサムネイルを生成できます。大きなモデルは処理に時間がかかる場合があります。`,generateThumbnailsForStl:`STLファイルのサムネイルを生成`,threemfDetected:`3MFファイルを検出`,threemfExtractionInfo:`プリンターモデル、素材、色、印刷設定は3MFファイルから自動的に抽出されます。`,willBeExtracted:`• 展開予定`,filesExtracted:`• {{count}}個のファイルを展開済み`,uploadComplete:`アップロード完了: {{succeeded}} 件成功`,uploadFailed:`アップロード失敗`,zipFilesFailed:`{{count}}個のファイルが失敗`,uploading:`アップロード中...`,changeLink:`リンクを変更...`,linkTo:`リンク先...`,linkToProjectOrArchive:`プロジェクトまたはアーカイブにリンク`,generateThumbnail:`サムネイルを生成`,generateThumbnails:`サムネイルを生成`,generateThumbnailsForMissing:`サムネイルのないSTLファイルのサムネイルを生成`,gridView:`グリッド表示`,listView:`リスト表示`,lowDiskSpaceWarning:`ディスク容量不足の警告`,lowDiskSpaceDetails:`{{total}}中{{free}}の空き容量のみ。しきい値は設定で{{threshold}}GBに設定されています。`,files:`ファイル`,folders:`フォルダ`,size:`サイズ`,free:`空き:`,allFiles:`すべてのファイル`,allExternal:`外部`,externalIsEmpty:`外部ファイルはありません`,externalEmptyDescription:`リンクされた外部フォルダ内のファイルがここに表示されます。`,wrap:`折り返し`,enableTextWrapping:`テキスト折り返しを有効化`,disableTextWrapping:`テキスト折り返しを無効化`,collapse:`折りたたむ`,collapseFoldersByDefault:`フォルダをデフォルトで折りたたむ`,expandFoldersByDefault:`フォルダをデフォルトで展開する`,folderSort:`フォルダの並べ替え`,folderSortByName:`名前順`,folderSortByActivity:`最終更新順`,dragToResizeTooltip:`ドラッグしてリサイズ、ダブルクリックでリセット`,searchFiles:`ファイルを検索...`,searchSubfoldersHint:`サブフォルダーを含む`,readme:{truncated:`切り詰め`,show:`READMEを表示`,hide:`READMEを非表示`,label:`README`},tags:{title:`タグ`,subtitle:`ファイルに横断的なフィルタ用のラベルを付けます — おもちゃ、子ども向け、PETGのみ、など。`,manage:`タグ`,manageTitle:`タグカタログを管理`,add:`新しいタグ`,edit:`タグの名前を変更`,name:`名前`,fileCount:`ファイル数`,empty:`タグがまだありません。作成してファイルにラベル付けを始めましょう。`,noMatches:`一致するタグがありません。`,createPlaceholder:`例：おもちゃ、子ども向け、petg`,createButton:`作成`,nameRequired:`名前は必須です。`,searchPlaceholder:`タグを絞り込み...`,created:`タグを作成しました。`,updated:`タグの名前を変更しました。`,deleted:`タグを削除しました。`,saveFailed:`タグを保存できませんでした。`,deleteFailed:`タグを削除できませんでした。`,applyFailed:`タグを適用できませんでした。`,applyAdd:`タグを追加`,applyRemove:`タグを削除`,applyAddSuccess:`{{files}}個のファイルに{{count}}個のタグを追加しました。`,applyRemoveSuccess:`{{files}}個のファイルから{{count}}個のタグを削除しました。`,actionAdd:`選択したファイルに追加`,actionRemove:`選択したファイルから削除`,tagAction:`タグ付け`,bulkTitle:`選択した{{count}}個のファイルにタグ付け`,bulkTooltip:`選択したすべてのファイルでタグを追加・削除します。`,noPermission:`ファイルにタグを付ける権限がありません。`,filterLabel:`絞り込み:`,clearAll:`すべてクリア`,confirmDelete:`タグ「{{name}}」を削除しますか？`,confirmDeleteMessage:`カタログからタグを削除します。ファイル自体や他のタグはそのまま残ります。`,confirmDeleteInUseMessage:`このタグは{{count}}個のファイルに付いています。削除するとすべてのファイルからチップが消えますが、ファイル自体はそのままです。`,editAria:`{{name}}を編集`,deleteAria:`{{name}}を削除`},allTypes:`すべての種類`,prints:`印刷回数`,ascending:`昇順`,descending:`降順`,showModified:`更新日時を表示`,hideModified:`更新日時を非表示`,lastModified:`最終更新`,lastActivity:`最終アクティビティ`,resultsCount:`{{total}}件中{{showing}}件`,selectAll:`すべて選択`,deselectAll:`すべて選択解除`,selected:`{{count}}件選択中`,adding:`追加中...`,loadingFiles:`ファイルを読み込み中...`,folderIsEmpty:`フォルダーは空です`,noFilesYet:`ファイルはまだありません`,folderEmptyDescription:`ファイルをアップロードするか、このフォルダーにファイルを移動して開始しましょう。`,noFilesDescription:`印刷関連ファイルの整理を始めるにはファイルをアップロードしてください。`,noMatchingFiles:`一致するファイルがありません`,noMatchingFilesDescription:`現在の検索またはフィルター条件に一致するファイルがありません。`,clearFilters:`フィルターをクリア`,printedCount:`{{count}}回印刷済み`,uploadedBy:`アップロード者`,deleteFolder:`フォルダを削除`,deleteFile:`ファイルを削除`,deleteFilesCount:`{{count}}件のファイルを削除`,deleteFolderConfirm:`このフォルダを削除しますか？中のファイルもすべて削除されます。`,deleteFileConfirm:`このファイルを削除しますか？`,deleteFilesConfirm:`選択した{{count}}件のファイルを削除しますか？この操作は元に戻せません。`,deleting:`削除中...`,noPermissionRenameFolder:`フォルダー名を変更する権限がありません`,noPermissionLinkFolder:`フォルダーをリンクする権限がありません`,noPermissionDeleteFolder:`フォルダーを削除する権限がありません`,onlyEmptyFoldersDeletable:`空のフォルダーのみ削除できます`,noPermissionPrint:`印刷する権限がありません`,noPermissionSlice:`ファイルをスライスする権限がありません`,noPermissionAddToQueue:`キューに追加する権限がありません`,noPermissionDownload:`ファイルをダウンロードする権限がありません`,noPermissionPreview:`ファイルをプレビューする権限がありません`,preview3d:`3Dプレビュー`,noPermissionRenameFile:`このファイル名を変更する権限がありません`,noPermissionGenerateThumbnail:`サムネイルを生成する権限がありません`,noPermissionDeleteFile:`このファイルを削除する権限がありません`,noPermissionCreateFolder:`フォルダーを作成する権限がありません`,noPermissionUpload:`ファイルをアップロードする権限がありません`,noPermissionMoveFiles:`ファイルを移動する権限がありません`,noPermissionDeleteFiles:`ファイルを削除する権限がありません`,linkExternal:`外部リンク`,linkExternalFolder:`外部フォルダをリンク`,linkExternalFolderDescription:`ホストディレクトリ（NAS、USB、ネットワーク共有）をファイルマネージャにマウントします。ファイルはコピーされず、元のパスから直接アクセスされます。`,externalFolderNamePlaceholder:`例：NASプリント`,externalPath:`ホストパス`,externalPathHelp:`Dockerホスト上のディレクトリの絶対パス。コンテナにバインドマウントされている必要があります。`,readOnly:`読み取り専用`,readOnlyHelp:`アップロードと削除を防止`,showHiddenFiles:`隠しファイルを表示（ドットファイル）`,externalFolder:`外部フォルダ`,scanFolder:`スキャン`,toast:{folderCreated:`フォルダを作成しました`,openInSlicerFailed:`スライサーで開けませんでした`,folderDeleted:`フォルダを削除しました`,fileDeleted:`ファイルを削除しました`,filesDeleted:`{{count}}件のファイルを削除しました`,filesMoved:`ファイルを移動しました`,folderLinked:`フォルダをリンクしました`,folderUnlinked:`フォルダのリンクを解除しました`,externalFolderLinked:`外部フォルダがリンクされスキャンされました`,folderScanned:`スキャン完了：{{added}}件追加、{{removed}}件削除`,addedToQueue:`{{count}}個のファイルをキューに追加しました`,addedToQueuePartial:`{{added}}件追加、{{failed}}件失敗`,failedToAddToQueue:`ファイルの追加に失敗: {{error}}`,fileRenamed:`ファイル名を変更しました`,folderRenamed:`フォルダ名を変更しました`,thumbnailsGenerated:`{{count}}件のサムネイルを生成しました`,thumbnailsGeneratedPartial:`{{succeeded}}件生成、{{failed}}件失敗`,noStlMissingThumbnails:`サムネイルのないSTLファイルはありません`,failedToGenerateThumbnails:`サムネイルの生成に失敗: {{error}}`,thumbnailGenerated:`サムネイルを生成しました`,failedToGenerateThumbnail:`サムネイルの生成に失敗: {{error}}`}},projects:{parentLabel:`親プロジェクト`,parentNone:`なし（トップレベルプロジェクト）`,parentHint:`このプロジェクトを別のプロジェクトの下に配置すると、数値がマスタープロジェクトに集計されます`,partOf:`{{name}} の一部`,subProjectCount:`サブプロジェクト {{count}} 件`,subProjectsOf:`{{name}} のサブプロジェクト`,collapseSubProjects:`サブプロジェクトを折りたたむ`,expandSubProjects:`サブプロジェクトを展開`,title:`プロジェクト`,subtitle:`印刷プロジェクトを管理`,newProject:`新規プロジェクト`,editProject:`プロジェクトを編集`,deleteProject:`プロジェクトを削除`,projectName:`プロジェクト名`,description:`説明`,noProjects:`プロジェクトはまだありません`,noProjectsFiltered:`{{status}}のプロジェクトはありません`,noProjectsFilteredHelp:`{{status}}のプロジェクトがありません。ステータスが変更されるとここに表示されます。`,createFirst:`最初のプロジェクトを作成して、関連する印刷の整理、進捗管理、ビルドの管理を始めましょう。`,createFirstButton:`最初のプロジェクトを作成`,create:`作成`,files:`ファイル`,prints:`印刷`,plates:`プレート`,parts:`パーツ`,lastModified:`最終更新日`,deleteConfirm:`このプロジェクトを削除しますか？アーカイブとキューアイテムはリンク解除されますが、削除されません。`,addFiles:`ファイルを追加`,removeFile:`ファイルを削除`,viewDetails:`詳細を表示`,namePlaceholder:`プロジェクト名`,descriptionPlaceholder:`プロジェクトの説明（任意）`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URLはhttp://またはhttps://で始まる必要があります`,openExternalUrl:`プロジェクトのURLを開く`,coverImageLabel:`カバー画像`,coverImageAlt:`プロジェクトのカバー画像`,coverImageUpload:`アップロード`,coverImageReplace:`置き換える`,coverImageRemove:`削除`,color:`色`,targetPlates:`目標プレート数`,targetPlatesPlaceholder:`例: 10`,targetPlatesHelp:`印刷ジョブの数`,targetParts:`目標パーツ数`,targetPartsPlaceholder:`例: 50`,targetPartsHelp:`必要なオブジェクトの総数`,targetSets:`ファイルごとの部数`,targetSetsPlaceholder:`例: 10`,targetSetsHelp:`各印刷可能ファイルを印刷する回数`,tagsLabel:`タグ（カンマ区切り）`,tagsPlaceholder:`カンマ区切りのタグ`,dueDate:`期限`,priority:`優先度`,priorityLow:`低`,priorityNormal:`通常`,priorityHigh:`高`,priorityUrgent:`緊急`,statusActive:`進行中`,statusCompleted:`完了`,statusArchived:`アーカイブ済み`,done:`完了`,completed:`完了`,failed:`失敗`,inQueue:`キュー内`,noPrintsYet:`印刷履歴なし`,printJobs:`印刷ジョブ`,partsPrinted:`印刷済みパーツ`,failedParts:`失敗パーツ`,import:`インポート`,export:`エクスポート`,importProject:`プロジェクトをインポート`,exportAll:`すべてのプロジェクトをエクスポート`,loading:`プロジェクトを読み込み中...`,noEditPermission:`プロジェクトを編集する権限がありません`,noDeletePermission:`プロジェクトを削除する権限がありません`,noCreatePermission:`プロジェクトを作成する権限がありません`,noImportPermission:`プロジェクトをインポートする権限がありません`,noExportPermission:`プロジェクトをエクスポートする権限がありません`,toast:{created:`プロジェクトを作成しました`,updated:`プロジェクトを更新しました`,deleted:`アーカイブを削除しました`,imported:`プロジェクトをインポートしました`,multipleImported:`{{count}}件のプロジェクトをインポートしました`,importFailed:`インポートに失敗しました`,exported:`プロジェクトをエクスポートしました（メタデータのみ）`}},projectDetail:{notFound:`見つかりません`,backToProjects:`プロジェクト一覧に戻る`,export:`エクスポート`,exportProject:`プロジェクトをエクスポート`,noExportPermission:`プロジェクトをエクスポートする権限がありません`,noEditPermission:`このプロジェクトを編集する権限がありません`,partOf:`所属先`,priorityLabel:`優先度`,noPrints:`このプロジェクトにはまだ印刷がありません`,status:{active:`進行中`,completed:`完了`,archived:`アーカイブ済み`},priority:{low:`低`,normal:`通常`,high:`高`,urgent:`緊急`},dueDate:{overdue:`期限超過`,today:`今日が期限`,daysLeft:`残り{{count}}日`},progress:{platesProgress:`プレート進捗`,partsProgress:`パーツ進捗`,setsProgress:`完成セット`,sets:`セット`,setsHint:`すべての印刷可能ファイルがこの回数に達するとセットが完成します`,printJobs:`印刷ジョブ`,parts:`パーツ`,percentComplete:`{{percent}}% 完了`,remaining:`残り {{count}} 件`},stats:{printJobs:`印刷ジョブ`,total:`合計`,failed:`失敗 {{count}} 件`,partsPrinted:`印刷済みパーツ {{count}} 件`,printTime:`印刷時間`,filamentUsed:`フィラメント使用量`},cost:{title:`コスト追跡`,filamentCost:`フィラメント`,energy:`エネルギー`,totalCost:`合計コスト`,total:`合計`,includesBom:`BOM含む`,budget:`予算`,remaining:`残り`},subProjects:{title:`サブプロジェクト ({{count}})`,jobs:`ジョブ {{count}} 件`},rollup:{title:`サブプロジェクト {{count}} 件を含む`,progress:`全体の進捗`,percentComplete:`{{percent}}% 完了`},notes:{title:`メモ`,noEditPermission:`このプロジェクトを編集する権限がありません`,placeholder:`このプロジェクトについてメモを追加...`,empty:`<空>`},files:{title:`ファイル`,linkFolders:`ファイルマネージャーからフォルダーをリンク`,forQuickAccess:`してクイックアクセスできるようにします。`,fileCount:`{{count}}ファイル`,empty:`<空>`,printedCount:`{{count}}回印刷済み`,progressTooltip:`{{target}}回中{{done}}回の印刷が完了`,noFiles:`このフォルダにファイルはありません。`},bom:{title:`部品表`,acquired:`{{completed}}/{{total}} 取得済み`,showAll:`すべて表示`,hideDone:`完了を非表示`,addPart:`パーツを追加`,noAddPermission:`パーツを追加する権限がありません`,partNamePlaceholder:`パーツ名`,partName:`パーツ名`,qty:`数量`,price:`価格 ({{currency}})`,sourcingUrlPlaceholder:`URL（任意）`,remarksPlaceholder:`備考`,deletePart:`パーツを削除`,deleteConfirm:`「{{name}}」を削除しますか？`,noUpdatePermission:`パーツを更新する権限がありません`,noEditPermission:`このプロジェクトを編集する権限がありません`,noDeletePermission:`プロジェクトを削除する権限がありません`,totalCost:`合計コスト`,empty:`<空>`},timeline:{title:`アクティビティタイムライン`,empty:`<空>`},template:{saveAsTemplate:`テンプレートとして保存`,noCreatePermission:`プロジェクトを作成する権限がありません`},queue:{title:`印刷キュー`,viewAll:`すべて表示`,printing:`印刷中 {{count}} 件`,queued:`キュー内 {{count}} 件`},prints:{title:`印刷 ({{count}})`},toast:{projectUpdated:`プロジェクトを更新しました`,partAdded:`パーツを追加しました`,partRemoved:`パーツを削除しました`,exportFailed:`エクスポートに失敗しました`,projectExported:`プロジェクトがエクスポートされました`,templateCreated:`プロジェクトからテンプレートを作成しました`}},system:{title:`システム情報`,version:`バージョン`,uptime:`稼働時間`,cpuUsage:`CPU使用率`,memoryUsage:`メモリ使用量`,diskUsage:`ディスク使用量`,networkInfo:`ネットワーク情報`,logs:`ログ`,debugMode:`デバッグモード`,enableDebug:`デバッグログを有効化`,disableDebug:`デバッグログを無効化`,downloadLogs:`ログをダウンロード`,clearLogs:`通知ログを削除`,dockerInfo:`Docker情報`,containerName:`コンテナ名`,imageName:`イメージ名`,platform:`プラットフォーム`,architecture:`アーキテクチャ`},sponsors:{sectionTitle:`独立・コミュニティ運営`,tagline:`Bambuddyは無料で、これからも無料です。支援してくださる方々のおかげで、VCもクラウドロックインもありません。`,viewSupporters:`サポーター一覧`,toastPrints:`Bambuddyで{{count}}件の印刷を完了しました。Bambuddyは支援者のおかげで無料で提供されています。`,toastCost:`Bambuddyで{{total}}分のフィラメントを記録しました。プロジェクトを支えてくれている方々をご覧ください。`,toastArchives:`{{count}}件の印刷をBambuddyでアーカイブしました。独立を支えてくれている方々をご覧ください。`,toastAnniversary:`Bambuddyとの1周年です！プロジェクトを支えてくれている方々をご覧ください。`,toastVersionUpdate:`v{{version}}にアップデートされました。Bambuddyは支援者のおかげで無料で提供されています。`,toastBusiness:`{{count}}台のプリンターでBambuddyを運用中ですね。チーム向けのサポートプランがあります（優先対応、請求書発行、開発者への直接窓口）。`,businessCta:`ビジネス向けBambuddy`,businessTitle:`ビジネス向けBambuddy`,businessTagline:`{{count}}台のプリンターを運用中です。チームやプリントファーム向けに、優先サポート、商用ライセンス、請求書発行をご用意しています。`},library:{title:`フィラメントライブラリ`,addFilament:`フィラメントを追加`,editFilament:`フィラメントを編集`,deleteFilament:`フィラメントを削除`,vendor:`メーカー`,material:`素材`,color:`色`,kFactor:`K値`,temperature:`温度`,noFilaments:`ライブラリにフィラメントがありません`,deleteConfirm:`このフィラメントを削除しますか？`,importFromPrinter:`プリンターからインポート`,exportToFile:`ファイルにエクスポート`,runWithPipeline:{actionLabel:`パイプラインで実行`,noPermission:`パイプラインを実行する権限がありません`,modalTitle:`パイプラインで実行`,confirmTitle:`実行を確認`,confirmIntro:`プリフライトでこの実行に関する問題が見つかりました`,sourceHint:`ソース`,pipelineHint:`パイプライン`,targetHint:`対象`,pipelineListAria:`利用可能なパイプライン`,runAnyway:`とにかく実行`,loading:`読み込み中…`,empty:`保存されたパイプラインはまだありません。スライスダイアログを開き「パイプラインとして保存」をクリックして作成してください。`,noTarget:`対象プリンターが未設定`,noTargetMessage:`このパイプラインには対象プリンターが設定されていません。設定で開いて選択してください。`,copies:`コピー数`,copiesHint:`最大 {{n}}`,classTarget:`任意の {{model}}`,toast:{started:`パイプラインの実行を開始しました`,failed:`実行を開始できませんでした`},issue:{printerNotSet:`このパイプラインに対象プリンターが設定されていません。`,printerNotFound:`対象プリンターが存在しません。`,printerDisabled:`対象プリンターは無効です。`,printerOffline:`対象プリンターはオフラインです。`,filamentType:`フィラメントスロット {{slot}}: 期待 {{expected}}、AMS は {{actual}}`,filamentColor:`フィラメントスロット {{slot}}: 色が異なります（期待 {{expected}}、AMS は {{actual}}）`,amsSlotMissing:`AMS スロット {{slot}} はこのプリンターで利用できません`,filamentUnverified:`フィラメントスロット {{slot}} はクラウド／標準プリセットからのため、静的に検証できませんでした。`,noClassMatches:`このインストール内に、パイプラインの対象モデルクラス（{{expected}}）と一致するプリンターがありません。`,classNotSet:`パイプラインの対象がプリンタークラスに設定されていますが、モデルが選択されていません。`}}},slicerSettings:{presetValuesOutdatedSidecar:`スライサーの既定値を表示しています。スライサーサイドカーがこの機能より古く、プリセットの値を取得できません。値を表示するにはサイドカーのイメージを更新してください。変更しない項目は引き続きプリセットの値が使われます。`,presetValuesNotConfigured:`スライサーの既定値を表示しています。スライサーサイドカーが設定されていないため、プリセットの値を読み取れません。変更しない項目は引き続きプリセットの値が使われます。`,presetValuesSidecarUnavailable:`スライサーの既定値を表示しています。スライサーサイドカーが応答しなかったため、プリセットの値を読み取れません。変更しない項目は引き続きプリセットの値が使われます。`,presetValuesUnavailable:`スライサーの既定値を表示しています。選択したプリセットの値を読み取れませんでした。変更しない項目は引き続きプリセットの値が使われます。`,filamentDefault:`既定`,fromFile:`ファイル由来`,fromFileHint:`この項目は元ファイルで設計者が変更しています。値は {{value}} です。`,fromFilePrinterCoupled:`設計者のプリンター`,fromFilePrinterCoupledHint:`このファイルが設計されたプリンター向けの値です。お使いのプリンターでは不適切または範囲外になる場合があります。`,fromFileOverridesPreset:`プリセットを上書き`,fromFileOverridesPresetHint:`ファイルはこれを {{value}} に設定していますが、選択したプリセットは {{preset}} です。ファイルを優先する場合のみチェックしてください。`,useFromFile:`{{option}} に元ファイルの値を使用する`,otherFromFile:`このファイルのその他の設定`,fromFileSummary:`このファイルではデザイナーが{{count}}件のプロセス設定を変更しています。使われるのはチェックしたものだけです。`,fromFileUseAll:`デザイナーの設定を使う`,fromFileUseAllHint:`他のプリンターでも通用する設定にチェックを入れます。デザイナーのプリンター向けに調整された設定と、選んだプリセットを定義する設定はオフのままです。`,fromFileClear:`{{count}}件を解除`,loading:`スライサー設定を読み込んでいます…`,mode:{simple:`シンプル`,advanced:`詳細`,expert:`エキスパート`},searchPlaceholder:`設定を検索`,resetAll:`{{count}} 件をリセット`,resetOption:`既定値に戻す`,noMatches:`この検索に一致する設定はありません。`},slice:{filamentSlotUnset:`未設定`,processSettingsEmbedded:`「ファイル内蔵の設定を使用」が有効な間は使用されません。このスライスはファイル自身の設定で実行されます。`,processSettingsInactive:`無効`,presetsHidden:`{{count}} 件を非表示`,showAllPresets:`すべて表示`,showFewerPresets:`表示を減らす`,processSettings:`プロセス設定`,processSettingsHint:`このスライス用に選択したプリセットを調整します。変更しない項目はプリセットの定義のままです。`,processSettingsChanged:`{{count}} 件変更`,processSettingsUnchanged:`プリセットの既定値`,title:`モデルをスライス`,action:`スライス`,actionAll:`{{count}} プレートすべてをスライス`,actionAllTitle:`すべてのプレートを 1 つのマルチプレート出力としてスライスします（アーカイブは 1 件）。フィラメントの選択はプロジェクトで定義されたすべてのスロットを対象とします。`,allPlatesToggle:`{{count}} プレートすべてをスライス`,slicing:`スライス中…`,printer:`プリンタープロファイル`,process:`プロセスプロファイル`,filament:`フィラメントプロファイル`,filamentSlot:`フィラメント {{index}}（{{type}}）`,filamentColour:`フィラメントの色`,selectPreset:`— プリセットを選択 —`,loadingPresets:`プリセットを読み込み中…`,analyzingPlateFilaments:`プレートのフィラメントを分析中…`,analyzingPlateFilamentsHint:`このプレートが使用するAMSスロットを検出するためにプレビュースライスを実行中。キャッシュ後は再オープンが即座になります。`,previewToast:`{{name}}を分析中 – {{elapsed}}`,previewWithProgress:`{{name}}を分析中 – {{stage}} ({{percent}}%) – {{elapsed}}`,notUsedByPlate:`— このプレートでは使用しない`,noPresetsForSlot:`プリセットなし`,otherPrinters:`他のプリンター`,presetsLoadFailed:`プリセットの読み込みに失敗。先に設定 → プロファイルからインポートしてください。`,refreshPresets:`再読み込み`,refreshPresetsTitle:`プリセットを再取得 — クラウドとバンドルの最新リストを取得します（Bambu Studio または Bambu Handy でプリセットを削除した後にお使いください）`,allPresetsRequired:`すべてのプリセットを選択する必要があります`,useEmbedded:`ファイルに埋め込まれた設定を使用`,useEmbeddedHint:`上のプロファイルではなく、設計者が設定したとおり（ウォール、インフィル、フィラメント）にスライスします。お使いのプリンターがファイルと一致するため利用できます。`,autoOrient:`オブジェクトの向きを自動で調整`,autoOrientHint:`スライスする前に、各オブジェクトを印刷に適した面へ自動で回転させます。ファイルに保存された向きは上書きされます。`,autoArrange:`プレート上に自動配置`,autoArrangeHint:`オブジェクトが重ならないようにスライサーが並べ直します。ファイルの配置は置き換えられます。`,enqueuing:`スライスジョブを送信中…`,queued:`待機中…`,failed:`スライスに失敗。サイドカーのログを確認してください。`,startedToast:`バックグラウンドで{{name}}をスライス中…`,queuedToast:`待機中: {{name}} – {{elapsed}}`,runningToast:`{{name}}をスライス中 – {{elapsed}}`,runningWithProgress:`{{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,runningWithProgressMultiPlate:`プレート {{plateIndex}} / {{plateCount}} • {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,completedToast:`{{name}}をスライス済み`,externalWriteFallbackToast:`内部ライブラリに保存しました: 外部フォルダーに書き込めませんでした`,failedTitle:`スライスに失敗しました`,failedToast:`{{name}}のスライスに失敗: {{detail}}`,tier:{local:`インポート済み`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`標準`},cloud:{notAuthenticated:`Bambu Cloudにサインイン（設定 → プロファイル → Bambu Cloud）してクラウドプリセットを表示。`,expired:`Bambu Cloudセッションの有効期限切れ – クラウドプリセットを更新するには再ログインしてください。`,unreachable:`Bambu Cloudに接続できません。ローカルと標準のプリセットは引き続き使用できます。`},orcaCloud:{notAuthenticated:`Orcaプリセットを表示するには、Orca Cloudにサインインしてください（プロファイル → Orca Cloud）。`,expired:`Orca Cloudセッションが期限切れです — Orcaプリセットを更新するには再度サインインしてください。`,unreachable:`Orca Cloudは現在到達できません。他のプリセットは引き続き動作します。`},bedType:{label:`ビルドプレート`,auto:`自動（プロセスプリセットを使用）`,coolPlate:`クールプレート`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`},pipelines:{label:`パイプライン`,applyAria:`パイプラインを適用`,applyPrompt:`パイプラインを適用…`,empty:`保存されたパイプラインがありません`,saveButton:`パイプラインとして保存`,saveTitle:`現在の4つのスロットの選択を再利用可能なパイプラインとして保存`,namePlaceholder:`パイプライン名`,nameAria:`新しいパイプライン名`,toast:{applied:`「{{name}}」を適用しました`,saved:`パイプラインを保存しました`,saveFailed:`保存に失敗しました`}}},spoolman:{title:`Spoolman連携`,enabled:`Spoolman有効`,url:`Spoolman URL`,connected:`接続中`,disconnected:`未接続`,testConnection:`接続テスト`,sync:`同期`,syncing:`同期中...`,lastSync:`最終同期`,linkToSpoolman:`Spoolmanに連携`,openInSpoolman:`Spoolmanで開く`,unlinkSpool:`スプールのリンクを解除`,unlinkConfirmTitle:`スプールの割り当てを解除しますか？`,unlinkConfirmMessage:`このスロットからスプールが削除されます。スプール自体のデータは変更されません。`,selectSpool:`スプールを選択`,noUnlinkedSpools:`割り当てられていないスプールがありません`,linkSuccess:`スプールが正常に割り当てられました`,linkFailed:`スプールの割り当てに失敗しました`,unlinkSuccess:`スプールの割り当てが正常に解除されました`,unlinkFailed:`スプールの割り当て解除に失敗しました`,linkedSpool:`割り当て済みスプール`,spoolId:`スプールID`,fillSourceLabel:`(Spoolman)`,weight:`重量`,remaining:`残り`,disableWeightSync:`AMS推定重量同期を無効化`,disableWeightSyncDesc:`AMS推定値から残量を更新しません。AMSの割合ベースの推定よりもSpoolmanの使用量追跡を優先する場合に使用してください。新しいスプールは引き続きAMS推定値を初期重量として使用します。`,reportPartialUsage:`失敗した印刷の部分使用量を報告`,reportPartialUsageDesc:`印刷が失敗またはキャンセルされた場合、レイヤー進捗に基づいてその時点までの推定フィラメント使用量を報告します。`},locations:{title:`保管場所`,subtitle:`棚・引き出しなど、スプールの物理的な保管場所を管理`,add:`場所を追加`,addShort:`追加`,edit:`場所を編集`,name:`名前`,spools:`スプール`,sensors:`センサー`,empty:`保管場所がありません。最初の棚または引き出しを作成してください。`,manage:`保管場所`,createPlaceholder:`例: 棚A、引き出し1`,nameRequired:`場所名が必要です`,created:`場所を作成しました`,updated:`場所を更新しました`,deleted:`場所を削除しました`,saveFailed:`場所の保存に失敗しました`,deleteFailed:`場所の削除に失敗しました`,deleteBlocked:`削除前にこの場所のスプールをすべて移動してください`,confirmDelete:`「{{name}}」を削除しますか？`,confirmDeleteMessage:`この場所はカタログから削除されます。先にスプールを移動してください。`,confirmDeleteMessageWithSensors:`この場所はカタログから削除されます。先にスプールを移動してください。接続されているセンサーも削除されます。`},inventory:{title:`スプール在庫管理`,subtitle:`スプールを管理`,addToInventory:`在庫に追加`,addToInventoryPending:`追加中...`,addToInventorySuccess:`スプールを在庫に追加しました`,addToInventoryFailed:`スプールの在庫追加に失敗しました`,unknownSpoolTitle:`新しいフィラメントを検出`,unknownSpoolMessage:`{{location}} で不明なRFIDタグのスプールが検出されました。今すぐ在庫に追加しますか？`,unknownSpoolSlot:`スロット`,bulk:{selectAllVisible:`表示中をすべて選択`,selectRow:`行を選択`,selectGroup:`グループを選択`,selectionCount:`{{count}} 件選択中`,edit:`編集`,printLabels:`ラベルを印刷`,resetUsage:`使用量をリセット`,restore:`復元`,archive:`アーカイブ`,delete:`削除`,clearSelection:`選択を解除`,editTitle:`スプールを一括編集`,editSubtitle:`選択中の {{count}} 件に適用されます。チェックを入れた項目のみ更新されます。`,editHint:`項目に入力すると更新対象としてマークされます。チェック済みの行のみ送信されます。空のままだとスプールは変更されません（項目を空にする操作はスプール個別の編集で行ってください）。`,useCustom:`"{{value}}" を使用`,toggleField:`この項目の更新を切り替え`,changeCount:`{{count}} 件の項目が更新されます。`,applyPending:`適用中...`,applyButton:`{{count}} 件に適用`,deleteTitle:`選択したスプールを削除`,archiveTitle:`選択したスプールをアーカイブ`,restoreTitle:`選択したスプールを復元`,resetUsageTitle:`選択したスプールの使用量をリセット`,deleteMessage:`{{count}} 件のスプールを完全に削除しますか？元に戻せません。`,archiveMessage:`{{count}} 件のスプールをアーカイブしますか？後で復元できます。`,restoreMessage:`{{count}} 件のアーカイブ済みスプールを復元しますか？`,resetUsageMessage:`{{count}} 件のスプールの「累計使用量」カウンターをリセットしますか？残量は保持されます。`,updateSuccess:`{{count}} 件のスプールを更新しました`,updateFailed:`一括更新に失敗しました`,updatePartial:`{{ok}} 件更新、{{failed}} 件失敗`,updateAllFailed:`{{count}} 件すべての更新に失敗しました — 再試行のため選択は維持されます`,deleteSuccess:`{{count}} 件のスプールを削除しました`,deleteFailed:`一括削除に失敗しました`,deletePartial:`{{ok}} 件削除、{{failed}} 件失敗`,deleteAllFailed:`{{count}} 件すべての削除に失敗しました — 再試行のため選択は維持されます`,archiveSuccess:`{{count}} 件のスプールをアーカイブしました`,archiveFailed:`一括アーカイブに失敗しました`,archivePartial:`{{ok}} 件アーカイブ、{{failed}} 件失敗`,archiveAllFailed:`{{count}} 件すべてのアーカイブに失敗しました — 再試行のため選択は維持されます`,restoreSuccess:`{{count}} 件のスプールを復元しました`,restoreFailed:`一括復元に失敗しました`,restorePartial:`{{ok}} 件復元、{{failed}} 件失敗`,restoreAllFailed:`{{count}} 件すべての復元に失敗しました — 再試行のため選択は維持されます`,invalidHex:`16進数 6 文字（RRGGBB）または 8 文字（RRGGBBAA）を入力してください。それ以外の場合この項目は適用されません。`},spoolmanMixedContentTitle:`Spoolman を HTTPS で読み込めません — ブラウザが混在コンテンツをブロックしています`,spoolmanMixedContentBody:`Bambuddy はリバースプロキシ経由で HTTPS 配信されていますが、Spoolman の URL は HTTP のままです。ブラウザはセキュリティ上の理由で混在コンテンツをブロックするため、埋め込みの Spoolman UI を表示できません。Spoolman も HTTPS でアクセスできる必要があります。`,spoolmanMixedContentFixReverseProxy:`Spoolman を Bambuddy と同じリバースプロキシ（Traefik / Nginx / Caddy）の後ろに HTTPS で配置し、設定で Spoolman URL を新しい HTTPS アドレスに更新してください。`,spoolmanMixedContentFixOpenNewTab:`回避策として Spoolman を新しいタブで HTTP として開くことができます — 混在コンテンツのルールは埋め込みフレームのみに適用され、独立したタブは問題なく動作します。`,spoolmanOpenInNewTab:`Spoolman を新しいタブで開く`,labels:{title:`スプールラベルを印刷`,selectedCount:`{{count}}件選択中`,pickSpools:`ラベルを印刷するスプールを選択:`,monochrome:`モノクロ（白黒プリンター）`,monochromeHint:`カラースウォッチを削除してテキストを広げます`,startingPosition:`ラベルの開始位置`,startingPositionRange:`シートテンプレートのみ：L7160 は1～21、5160 は1～30に対応します。`,startingPositionInvalid:`1～{{capacity}}の整数を入力してください。`,startingPositionFirst:`位置1から印刷を開始します。`,startingPositionSkipped:`最初のシートでは位置1～{{lastPosition}}を空白にします。`,startingPositionRangeError:`このシートの開始位置は1～{{capacity}}で指定してください。`,searchPlaceholder:`名前、ブランド、#IDで検索`,filterByMaterial:`素材:`,allMaterials:`すべて`,selectVisible:`表示中をすべて選択 ({{count}})`,deselectVisible:`表示中を選択解除`,clearAll:`すべてクリア`,noSpoolsToShow:`表示するスプールはありません。フィルターを調整して再試行してください。`,noMatches:`現在の検索またはフィルターに一致するスプールはありません。`,printOne:`このスプールのラベルを印刷`,printLabels:`ラベルを印刷…`,bulkTitle:`現在表示中の{{count}}件からラベルを印刷するスプールを選択`,noSpoolsTitle:`ラベル付けするスプールなし`,error:`ラベルを生成できませんでした: {{msg}}`,sortBy:{label:`並べ替え:`,id:`ID順`,color:`色順`},templates:{amsHolderSmall:{label:`AMS ホルダー — 小 (74 × 33 mm)`,hint:`1ページにつき1枚；MakerWorld モデル 752566 (AMS フィラメントラベルホルダー) の印刷可能なラベルに対応します。`},amsHolderLarge:{label:`AMS ホルダー — 大 (75 × 55 mm)`,hint:`1ページにつき1枚；AMS フィラメントラベルホルダーのカード紙挿入バージョンに対応します。色見本、ブランド、素材、ID、QR コードを表示できる広さです。`},box40x30:{label:`ボックスラベル (40 × 30 mm)`,hint:`1ページに1枚。DK/Brother の一般的なロールサイズで、フィラメント袋や保管箱のラベルに適しています。`},box:{label:`Box label (62 × 29 mm)`,hint:`1ページに1ラベル、Brother PT/QLおよびDymoの小さなラベル用サイズ。`},averyL7160:{label:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,hint:`EUシート規格、A4ページに21枚のラベル。`},avery5160:{label:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,hint:`米国シート規格、Letterページに30枚のラベル。`}}},csv:{importButton:`CSVインポート`,exportButton:`CSVエクスポート`,modalTitle:`CSVからスプールをインポート`,selectFile:`CSVファイルを選択するか、ここにドラッグ`,dragHint:`ヘッダー: material（必須）、brand、subtype、color_name、rgba、…`,parsing:`ファイルを読み込み中…`,previewError:`CSVファイルを読み込めませんでした`,validCount:`有効{{count}}件`,errorCount:`エラー{{count}}件`,skippedCount:`スキップ{{count}}件`,colRow:`行`,colStatus:`ステータス`,colColor:`色`,colorResolved:`カタログから色を補完`,colorCrossMaterial:`別の素材から色を取得しました — カタログに完全一致なし`,duplicateExisting:`この素材・ブランド・色のスプールは既に存在します — それでも新しいスプールとしてインポートされます`,spoolmanHint:`Spoolmanモードでは、Spoolman内蔵のCSVインポート/エクスポートを使用してください。`,importValidRows:`有効な{{count}}行をインポート`,noValidRows:`有効な行がありません`,importing:`インポート中…`,importSuccess:`{{count}}個のスプールをインポートしました`,importError:`インポートに失敗しました`,exportError:`エクスポートに失敗しました`},addSpool:`スプールを追加`,editSpool:`スプールを編集`,copySpool:`スプールをコピー`,material:`素材`,selectMaterial:`素材を選択...`,subtype:`サブタイプ`,brand:`ブランド`,searchBrand:`ブランドを検索...`,useCustomBrand:`「{{brand}}」を使用`,useCustomMaterial:`カスタム素材を使用: {{material}}`,suggestedOptions:`おすすめ`,allOptions:`すべて`,colorName:`色名`,colorNamePlaceholder:`ジェイドホワイト、ファイアレッド...`,color:`色`,hexColor:`HEXカラー`,pickColor:`カスタムカラーを選択`,labelWeight:`表示重量`,coreWeight:`空スプール重量`,searchSpoolWeight:`スプール重量を検索...`,weightUsed:`使用量`,currentWeight:`残量`,measuredWeight:`計測重量`,spoolName:`スプール`,costPerKg:`kgあたりのコスト`,storageLocation:`保管場所`,temperature:`温度`,humidity:`湿度`,battery:`バッテリー`,storageLocationPlaceholder:`例：棚A、引き出し1`,openInInventory:`インベントリで開く`,measuredWeightError:`計測重量は{{min}}gから{{max}}gの間で入力してください。`,slicerFilament:`スライサーフィラメント`,slicerFilamentName:`スライサープリセット名`,slicerPreset:`スライサープリセット`,searchPresets:`フィラメントプリセットを検索...`,selectedPreset:`選択済み`,noPresetsFound:`プリセットが見つかりません`,tempOverrides:`温度オーバーライド`,note:`メモ`,notePlaceholder:`このスプールに関する追加メモ...`,category:`カテゴリ`,categoryPlaceholder:`例：本番、試作、クライアントA`,categoryNone:`カテゴリなし`,storageLocationNone:`保管場所未設定`,lowStockThresholdOverride:`在庫低下のしきい値（このスプール）`,lowStockThresholdOverrideHelp:`空欄の場合、グローバル設定（{{global}}%）を使用します。`,clearRfid:`RFIDタグをクリア`,rfidCleared:`RFIDタグをクリアしました`,archive:`アーカイブ`,restore:`復元`,noSpools:`スプールがありません。最初のスプールを追加してください。`,noAvailableSpools:`利用可能なスプールがありません。インベントリにスプールを追加するか、別のスロットからスプールの割り当てを解除してください。`,kProfiles:`Kプロファイル`,addKProfile:`Kプロファイルを追加`,assignSpool:`スプールを割り当て`,unassignSpool:`割り当て解除`,assignSuccess:`スプールを割り当て、AMSスロットを設定しました`,assignPendingInsert:`割り当てました。スプールを挿入したときにスロットが設定されます。`,assignFailed:`スプールの割り当てに失敗しました`,selectSpool:`このスロットに割り当てるスプールを選択`,assigned:`割り当て済み`,assigning:`割り当て中...`,searchSpools:`スプールを検索...`,showAllSpools:`すべてのスプールを表示`,spoolmanSpools:`Spoolman スプール`,allMaterials:`すべての素材`,filterByBrand:`ブランドで絞り込み...`,showArchived:`アーカイブ済みを表示`,quickAdd:`クイック追加（在庫）`,quantity:`数量`,stock:`在庫`,configured:`設定済み`,spoolsCreated:`{{count}}本のスプールを作成しました`,spoolsPartiallyCreated:`{{total}}本中{{created}}本のスプールを作成しました（一部失敗）`,spoolCreated:`スプールを作成しました`,spoolUpdated:`スプールを更新しました`,spoolDeleted:`スプールを削除しました`,deepLinkSpoolNotFound:`スプールが見つかりません`,deepLinkFetchFailed:`スプールを読み込めませんでした — もう一度お試しください`,spoolArchived:`スプールをアーカイブしました`,spoolRestored:`スプールを復元しました`,kProfileSaveFailed:`Kプロファイル設定を保存できませんでした`,syncWeightSpoolNotFound:`スプールが見つかりません — 削除された可能性があります`,syncWeightSpoolmanUnreachable:`Spoolmanに接続できません — 後でもう一度お試しください`,syncWeightFailed:`重量の同期に失敗しました`,spoolmanUnreachable:`Spoolmanに接続できません — 後でもう一度お試しください`,deleteSpoolNotFound:`スプールが見つかりません — すでに削除された可能性があります`,deleteFailed:`スプールを削除できませんでした`,archiveSpoolNotFound:`スプールが見つかりません — すでに削除された可能性があります`,archiveFailed:`スプールをアーカイブできませんでした`,restoreSpoolNotFound:`スプールが見つかりません — すでに削除された可能性があります`,restoreFailed:`スプールを復元できませんでした`,saveFailed:`変更を保存できませんでした`,tagClearFailed:`タグを削除できませんでした`,deleteConfirm:`このスプールを削除しますか？この操作は元に戻せません。`,archiveConfirm:`このスプールをアーカイブしますか？`,advancedSettings:`詳細設定`,filamentInfoTab:`フィラメント情報`,paProfileTab:`PAプロファイル`,colorAndCostTab:`色とコスト`,printersTab:`プリンター`,filamentInfo:`フィラメント`,additional:`追加情報`,loadingPresets:`クラウドプリセットを読み込み中...`,cloudConnected:`クラウド接続済み`,cloudNotConnected:`クラウド未接続（デフォルト使用）`,recentColors:`最近`,searchColors:`色を検索...`,searchResults:`検索結果`,allColors:`すべての色`,commonColors:`一般的な色`,showLess:`少なく表示`,showAll:`すべて表示`,noColorsFound:`一致する色がありません`,noResults:`結果なし`,extraColorsLabel:`追加の色`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`2〜8個の16進数ストップをカンマで区切って貼り付けます。グラデーションとして表示されます。`,extraColorsInvalid:`無効な16進数を無視: {{tokens}}`,colorEffectLabel:`エフェクト`,colorEffect:{none:`なし`,sparkle:`スパークル`,wood:`ウッド`,marble:`マーブル`,glow:`グロー`,matte:`マット`,silk:`シルク`,galaxy:`ギャラクシー`,rainbow:`レインボー`,metal:`メタル`,translucent:`半透明`,gradient:`グラデーション`,dualColor:`デュアルカラー`,triColor:`トリカラー`,multicolor:`マルチカラー`},selectMaterialFirst:`フィラメント情報タブで素材を選択してください。`,noPrintersConfigured:`プリンターが設定されていません。プリンターを追加してください。`,matchingFilter:`フィルター`,anyBrand:`すべてのブランド`,anyVariant:`すべてのバリアント`,autoSelect:`自動選択`,matches:`件一致`,match:`件一致`,noMatches:`一致なし`,connected:`接続済み`,offline:`オフライン`,printerOffline:`プリンターがオフラインです。接続してキャリブレーションプロファイルを表示してください。`,noKProfilesMatch:`選択したフィラメントに一致するKプロファイルがありません。`,leftNozzle:`左ノズル`,rightNozzle:`右ノズル`,profilesSelected:`キャリブレーションプロファイル選択済み`,filamentPreset:`フィラメントプリセット`,presetUseSpoolDefault:`スプールのプリセットを使用`,presetInherited:`継承`,presetOverride:`上書き`,presetNeedsModel:`このプリンターはまだモデルを報告していないため、専用のプリセットを設定できません。`,autoMatchPresets:`自動で割り当て`,autoMatchPresetsHint:`各モデル名を含むスプールプリセットのバリアントを探します`,kProfilesPerPrinter:`Kプロファイル`,kProfileNotSet:`未設定`,kProfileFlowMismatch:`このプロファイルは{{profile}}ノズルで測定されましたが、装着されているのは{{fitted}}ノズルのため適用されません`,nozzle:`ノズル`,unknownModel:`不明なモデル`,onePrinter:`プリンター1台`,nPrinters:`プリンター{{n}}台`,filamentPresetsLoadFailed:`このスプールのモデル別プリセットを読み込めませんでした`,filamentPresetSaveFailed:`モデル別プリセットを保存できませんでした`,totalInventory:`在庫合計`,totalConsumed:`総消費量`,byMaterial:`素材別`,inPrinter:`プリンター内`,lowStock:`残量少`,sinceTracking:`追跡開始以降`,resetConsumedCounter:`カウンタをリセット`,resetConsumedCounterTooltip:`このスプールの消費量カウンタを0にする。残量は変更されません。`,resetConsumedCounterConfirm:`このスプールの消費量カウンタを0にリセットしますか？以降の印刷は再びゼロからカウントされます。スプール自体、残量計算、設定は変更されません。`,resetAllConsumedCounters:`すべてのカウンタをリセット`,resetAllConsumedCountersTooltip:`すべてのスプールの消費量カウンタを0にする。残量は変更されません。`,resetAllConsumedCountersConfirm:`{{count}}件すべてのスプール（アーカイブ済みを含む）の消費量カウンタを0にリセットしますか？「累計消費量」の値がクリアされ、以降の印刷はゼロからカウントされます。スプール自体と残量は変更されません。`,consumedCounterReset:`カウンタをリセットしました`,allConsumedCountersReset:`{{count}}件のスプールのカウンタをリセットしました`,resetConsumedCounterFailed:`カウンタのリセットに失敗しました`,loadedInAms:`AMS/Extに装填中`,remaining:`残り`,weightCheck:`重量チェック`,lastWeighed:`最終計量`,neverWeighed:`未計量`,search:`スプールを検索...`,showing:`表示`,to:`〜`,of:`/`,show:`表示`,spools:`スプール`,spool:`スプール`,page:`ページ`,noSpoolsMatch:`結果なし`,noSpoolsMatchDesc:`検索やフィルターを調整してみてください。`,active:`アクティブ`,archived:`アーカイブ済み`,all:`すべて`,used:`使用済み`,new:`新規`,clearFilters:`フィルターをクリア`,table:`テーブル`,cards:`カード`,net:`正味`,groupSimilar:`グループ化`,groupedSpools:`{{count}}本の同一スプール`,groupedRows:`行`,columns:`列`,configureColumns:`列の設定`,configureColumnsDesc:`ドラッグして並べ替えるか、矢印を使用してください。目のアイコンで表示/非表示を切り替えます。`,visible:`表示中`,reset:`リセット`,cancel:`キャンセル`,applyChanges:`変更を適用`,moveUp:`上へ移動`,moveDown:`下へ移動`,hideColumn:`列を非表示`,showColumn:`列を表示`,linkToSpool:`スプールにリンク`,tagLinked:`タグがスプールにリンクされました`,tagLinkFailed:`タグのリンクに失敗しました`,tagAlreadyLinked:`タグは既にスプール #{{id}} にリンクされています`,unknownTag:`不明なRFIDタグが検出されました`,usageHistory:`使用履歴`,noUsageHistory:`まだ使用記録がありません`,printName:`プリント名`,weightConsumed:`消費重量`,clearHistory:`クリア`,historyCleared:`使用履歴がクリアされました`,fillSourceLabel:`(在庫)`,lowStockThresholdError:`しきい値は0.1から99.9の間でなければなりません`,assignMismatchTitle:`材料の不一致`,assignMismatchMessage:`選択したスプールの材料「{{spoolMaterial}}」は、{{location}} のトレイ材料「{{trayMaterial}}」と一致しません。割り当てますか？`,assignMismatchConfirm:`強制的に割り当て`,assignPartialMismatchMessage:`スプールの材料「{{spoolMaterial}}」は「{{trayMaterial}}」に似ていますが、{{location}} と完全には一致しません。続行しますか？`,assignProfileMismatchMessage:`スプールのプロファイル「{{spoolProfile}}」は {{location}} のトレイプロファイル「{{trayProfile}}」と一致しません。続行しますか？`,assignReconfigureNote:`AMSスロットはスプールのプロファイルで再構成されます。`,spoolmanFilamentCatalog:`Spoolmanフィラメントカタログ`,pickFromSpoolmanCatalog:`Spoolmanカタログから選択…`,spoolmanFilamentSelected:`Spoolmanカタログからフィラメントを選択しました`,spoolmanFilamentUnlinked:`フィラメントカタログのリンクを解除しました`,noSpoolmanFilaments:`Spoolmanカタログにフィラメントが見つかりません`,spoolmanFilamentColorSwatch:`フィラメントの色`,spoolWeightManagedBySpoolman:`空スプールの重量はSpoolmanでフィラメントタイプごとに管理されています`,spoolmanCatalogLoadFailed:`Spoolmanのフィラメントカタログを読み込めませんでした`},timelapse:{title:`タイムラプス`,create:`タイムラプスを作成`,download:`ダウンロード`,delete:`削除`,preview:`プレビュー`,frameRate:`フレームレート`,quality:`品質`,processing:`バックアップファイルを処理中...`,noTimelapses:`利用可能なタイムラプスがありません`},ams:{title:`AMS`,slot:`スロット`,empty:`<空>`,emptySlot:`空のスロット`,slotEmpty:`空`,slotUnconfigured:`?`,emptySlotReset:`スプール未割当`,unknown:`不明`,humidity:`湿度`,temperature:`温度`,filamentType:`フィラメントタイプ`,filamentColor:`色`,remaining:`残り`,history:`AMS履歴`,noHistory:`メンテナンス履歴がありません`,configureSlot:`フィラメントプロファイルとK値でスロットを設定`,externalSpool:`外部スプール`,profile:`プロファイル`,kFactor:`K値`,kFactorShort:`K値`,fill:`充填率`,configure:`設定`,used:`使用済み`,remainingUnit:`残り`},printModal:{variants:{editNote:`これらの候補はキュー追加時に決まります。変更するにはキャンセルして追加し直してください。`,title:`プリンターの候補`,help:`1つのジョブ、キューは1枠。条件に合う最初に空いたプリンターがそのファイルを印刷します。`,unknownModel:`不明なモデル`,plateFor:`{{filename}} のプレート`,moveUp:`上へ`,moveDown:`下へ`,queued:`{{count}}件の候補付きでキューに追加しました`},selectPrinter:`プリンターを選択`,selectPlate:`プレートを選択`,filamentMapping:`フィラメントマッピング`,useArchiveMapping:`マッピング`,useArchiveMappingTooltip:`タイプ/色で照合する代わりに、このアーカイブに保存されたAMSマッピング（スライサーから）からすべてのスロットを選択します。`,clickToChangeSlot:`クリックしてスロットの割り当てを変更`,reRead:`再読み込み`,plateN:`プレート {{n}}`,plateFilamentsUnreadable:`選択したプレートのフィラメントを読み取れなかったため、割り当てできません。そのプレートの選択を解除すると、残りをキューに追加できます。`,totalCost:`合計コスト:`,slotRemainingShort:` - 残{{grams}}g`,printSettings:`印刷設定`,bedLeveling:`ベッドレベリング`,flowCalibration:`フローキャリブレーション`,vibrationCalibration:`振動キャリブレーション`,layerInspection:`第一層検査`,timelapse:`タイムラプス`,cancel:`キャンセル`,noPrintersAvailable:`利用可能なプリンターがありません`,printerBusy:`プリンターは使用中です`,printerOffline:`プリンターはオフラインです`,sameTypeDifferentColor:`同じ種類、異なる色`,filamentTypeNotLoaded:`フィラメントタイプが未読み込み`,statusReady:`準備完了`,statusColorMismatch:`色が不一致`,statusTypeNotFound:`タイプが見つかりません`,requiredTooltip:`必要: {{name}} - {{color}}`,manuallySelected:`手動で選択`,autoMatched:`自動で一致`,selectSlot:`スロットを選択`,sameTypeDifferentColorDetail:`同じ種類、異なる色: 必要な色は {{required}}、スロットは {{loaded}}`,requiredTypeNotInPrinter:`必要なフィラメントタイプがプリンターに見つかりません。`,whenToPrint:`印刷タイミング`,asap:`即時`,queue:`キュー`,schedule:`スケジュール`,dateTime:`日時`,invalidDateTime:`有効な日時を入力してください`,openCalendar:`カレンダーを開く`,requireManualStart:`手動開始を要求`,requirePreviousSuccess:`前の印刷が成功した場合のみ開始`,autoOffAfter:`完了後にプリンターの電源を切る`,helpAsap:`印刷はキューの先頭に追加され、対象プリンターがアイドルになるとすぐに開始します。`,helpSchedule:`予定時刻にプリンターがアイドルであれば印刷を開始します。使用中の場合は、利用可能になるまで待機します。`,helpQueue:`印刷はキューの最後に追加されます。`,leftNozzle:`L`,rightNozzle:`R`,leftNozzleTooltip:`左ノズル`,rightNozzleTooltip:`右ノズル`,ftsSameInletHint:`この印刷で使うフィラメントはすべてフィラメント経路切替器 IN-{{inlet}} にあります。同じ入口のフィラメント同士の交換は遅くなります。1 つをもう一方の入口の AMS に移すと速くなります。`,rackPosition:`ラック位置`,rackPositionTooltip:`このフィラメントを印刷するラック上のノズル。位置番号はプリンター本体と同じです。`,rackEmptyPosition:`このラック位置は空です`,rackWrongNozzle:`{{has}} ノズルが装着されています。このフィラメントには {{needs}} が必要です`,filamentOverride:`フィラメントオーバーライド`,filamentOverrideHint:`モデルベースの割り当てに使用するフィラメントをオプションで上書きします。スケジューラは元の3MF値ではなく、選択したフィラメントに基づいてマッチングします。`,originalFilament:`オリジナル`,overrideWith:`変更先`,resetToOriginal:`オリジナルに戻す`,insufficientFilamentTitle:`フィラメントが不足しています`,waitingForAmsStatus:`{{printer}} のAMSステータスを待機しています…`,insufficientFilamentMessage:`割り当てられたスプールの一部は、この印刷に必要な量より残量が少ないです:`,insufficientFilamentLine:`{{printer}} - {{slot}}: 必要 {{required}}g、残り {{remaining}}g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: 必要 {{required}}g、一致するスプール合計で {{remaining}}g（AMSフィラメントバックアップ）`,printAnyway:`それでも印刷`,forceColorMatch:`カラーマッチを強制`,staggerPrinterStarts:`プリンター開始を段階的に`,staggerGroupSize:`グループサイズ`,staggerInterval:`間隔（分）`,staggerPreview:`{{printers}}台のプリンター → {{size}}台ずつ{{groups}}グループ、{{interval}}分ごとに開始`,staggerLastGroup:`最終グループ: {{count}}`,staggerTotal:`合計: {{minutes}}分`,staggerToPrinters:`{{count}}台のプリンターに段階的に送信`,gcodeInjection:`自動印刷G-codeを挿入`,insufficientBudget:`予算が不足しています`,unlimitedNoBudget:`無制限 – 予算上限は設定されていません。`,noPrintableCostCenters:`印刷に利用できる有効なコストセンターがありません。管理者に印刷アクセスの付与を依頼してください。`},backup:{includesEncryptionKey:`ローカルバックアップにはMFA暗号化キーファイル（DATA_DIR/.mfa_encryption_key）が含まれ、バックアップZIPは自己完結型です。ZIPを機密扱いしてください — ファイルを持つ人は誰でも内部のOIDCクライアントシークレットとTOTPシークレットを復号できます。`,title:`バックアップと復元`,createBackup:`バックアップを作成`,restoreBackup:`バックアップの復元`,restoreDescription:`バックアップファイルからすべてのデータを置き換える`,downloadBackup:`バックアップをダウンロード`,uploadBackup:`バックアップをアップロード`,lastBackup:`最終バックアップ`,autoBackup:`自動バックアップ`,backupNow:`今すぐバックアップ`,restoreWarning:`警告: バックアップの復元は現在のすべてのデータを上書きします。`,includeArchives:`アーカイブを含む`,includeSettings:`設定を含む`,includeProfiles:`プロファイルを含む`,backupSuccess:`バックアップを作成しました`,restoreSuccess:`バックアップを復元しました`,backupFailed:`バックアップに失敗しました`,restoreFailed:`復元に失敗しました`,restoreNote:`復元中、仮想プリンターは停止されます`,githubBackup:`GitHubバックアップ`,enabled:`有効`,cloudLoginRequired:`Bambu Cloudログインが必要です。GitHubバックアップを有効にするには、プロファイル → クラウドプロファイルからサインインしてください。`,cloudLoginRequiredShort:`Cloudログインが必要`,githubDescription:`プロファイルをプライベートGitHubリポジトリに自動的に同期し、バックアップとバージョン履歴を保持します。`,repoIsPrivate:`リポジトリはプライベートです — バックアップしても安全です。`,repoIsPublicWarning:`リポジトリが公開（PUBLIC）です。Bambuddyのバックアップには MQTT 認証情報、Home Assistant トークン、Prometheus トークン、Bambu Cloud のメールアドレス、K-プロファイル経由のプリンタアクセスコードが含まれます。プロバイダー側でリポジトリをプライベートに変更するまで保存はブロックされます。`,repoVisibilityUnknown:`リポジトリの公開設定を確認できませんでした。Bambuddy はプライベートと確認できないリポジトリへのバックアップを拒否します。保存はブロックされます。`,repositoryUrl:`リポジトリURL`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`安全でないHTTPを許可`,allowInsecureHttpHint:`TLSなしのプライベートネットワーク上のセルフホストインスタンスに対して有効化`,personalAccessToken:`個人アクセストークン`,tokenSaved:`(保存済み)`,enterNewToken:`新しいトークンを入力して更新`,tokenHintGitHub:`Contentsの読み書き権限を持つきめ細かいトークン、またはrepoスコープを持つクラシックトークン。`,tokenHintGitLab:`apiスコープ、またはread_repositoryとwrite_repositoryの両方を持つトークン。`,tokenHintGitea:`write:repositoryスコープを持つトークン。`,tokenHintForgejo:`write:repositoryスコープを持つトークン。このリポジトリだけに限定したトークンで十分です。`,branch:`ブランチ`,provider:`Gitプロバイダー`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`手動のみ`,hourly:`毎時`,daily:`毎日`,weekly:`毎週`,includeInBackup:`バックアップに含める`,kProfiles:`Kプロファイル`,kProfilesDescription:`接続されたプリンターからの圧力キャリブレーション`,noPrintersConnected:`プリンターが接続されていません`,printersConnected:`{{connected}}/{{total}} 接続済み`,cloudProfiles:`クラウドプロファイル`,cloudProfilesDescription:`Bambu CloudとOrca Cloudからのフィラメント、プリンター、プロセスプリセット`,cloudProfilesAccounts:`接続済みアカウント — Bambu Cloud: {{bambu}}、Orca Cloud: {{orca}}`,appSettings:`アプリ設定`,appSettingsDescription:`Bambuddy設定（データベース全体）`,spoolInventory:`スプール在庫`,spoolInventoryDescription:`フィラメントスプール、使用履歴、コスト追跡`,printArchives:`印刷アーカイブ`,printArchivesDescription:`印刷履歴メタデータ（gcode/3MFファイルなし）`,lastBackupAt:`最終バックアップ:`,noBackupsYet:`バックアップはまだありません`,next:`次回:`,startingBackup:`バックアップを開始しています...`,test:`テスト`,enableBackup:`バックアップを有効化`,testConnection:`接続テスト`,enterRepoUrl:`リポジトリURLを入力してください`,enterRepoAndToken:`リポジトリURLとアクセストークンを入力してください`,repoRequired:`リポジトリURLは必須です`,tokenRequired:`アクセストークンは必須です`,githubBackupEnabled:`GitHubバックアップが有効になりました`,tokenUpdated:`トークンが更新されました`,settingsSaved:`設定が保存されました`,failedToSave:`保存に失敗しました: {{message}}`,backupCompleteFiles:`バックアップ完了 - {{count}}ファイルが更新されました`,backupSkippedNoChanges:`バックアップをスキップ - 変更なし`,backupFailed2:`バックアップに失敗しました: {{message}}`,clearedLogs:`{{count}}件のログを削除しました`,failedToClearLogs:`ログの削除に失敗しました: {{message}}`,restoreFromGit:{button:`Git から復元`,title:`Git バックアップから復元`,subtitle:`コミットと復元する項目を選択します`,commitLabel:`バックアップのコミット`,latestCommit:`最新のバックアップ (ブランチ先端)`,categoriesLabel:`復元する項目`,inspecting:`バックアップの内容を読み込んでいます...`,itemCount:`バックアップ内に {{count}} 件`,overwriteLabel:`既存のエントリを上書きする`,overwriteOn:`既存のエントリはバックアップの内容で更新されます。`,overwriteOff:`不足しているエントリのみ追加され、既存のものは変更されません。`,selectedCount:`{{count}} 件選択中`,restoring:`復元しています...`,confirmTitle:`バックアップから復元しますか?`,confirmMessage:`選択したカテゴリをこのコミットから復元します。不足しているエントリが追加され、既存のエントリはそのまま残ります。`,confirmMessageOverwrite:`選択したカテゴリをこのコミットから復元し、ローカルに既存のエントリを上書きします。この操作は取り消せません。`,kprofilesOverwriteCaveat:`Kプロファイルは例外です。スロットへの書き込みは、プリンター上のキャリブレーションを常に置き換えます。`,tally:`復元 {{restored}} 件、スキップ {{skipped}} 件、失敗 {{failed}} 件`,reloadHint:`復元したデータを全体に反映するには Bambuddy を再読み込みしてください。`,partialHint:`上に表示されたカテゴリーは完了し、保存されています。表示されていないカテゴリーは実行されていません。`,failed:`復元に失敗しました。`,loadFailed:`バックアップリポジトリを読み取れませんでした。`,details:{notPresent:`このバックアップコミットには含まれていません`,unreadableJson:`読み取れない JSON: {{paths}}`,settingsNoPayload:`データに設定が含まれていません`,settingsCredentialsWillSkip:`認証情報のようなキー {{count}} 件はスキップされます`,settingsCompanionWillSkip:`認証情報のようなキー {{count}} 件はスキップされ、それらに依存するスイッチ {{companion}} 件はオフのままになります`,settingsCompanionOnlyWillSkip:`スイッチ {{companion}} 件はオフのままになります - それぞれに必要な認証情報はバックアップから復元できません`,spoolsUsageCount:`使用履歴 {{count}} 件を含む`,archivesMetadataOnly:`メタデータのみ - 3MF ファイルとサムネイルは Git バックアップに含まれません`,kprofilesPrinterCount:`プリンター {{count}} 台分`},notes:{noData:`この種類のデータはこのバックアップに含まれていません`,archivesPrinterMissing:`一部のアーカイブが存在しないプリンターを参照していました - リンクを解除しました`,archivesProjectMissing:`一部のアーカイブが存在しないプロジェクトを参照していました - リンクを解除しました`,archivesOwnerCleared:`一部のアーカイブが存在しないユーザーを参照していました - 所有者を解除したため、管理者が割り当て直すまで archives:read_all 権限を持つユーザーにしか表示されません`,archivesOwnerUnmatched:`一部のアーカイブはこのインスタンスに存在しない所有者を指しています - バックアップのユーザー ID から推測せずに所有者を解除したため、管理者が割り当て直すまで archives:read_all 権限を持つユーザーにしか表示されません`,archivesOwnerUnknown:`一部のアーカイブは所有者なしで復元されました - このバックアップに所有者が記録されていないため、管理者が割り当てるまで archives:read_all 権限を持つユーザーにしか表示されません`,archivesUndeleted:`バックアップ後に削除されたアーカイブが再び表示されます - 上書きが有効でした`,archivesMetadataOnly:`復元されたアーカイブはメタデータのみです - 3MF ファイルとサムネイルは Git バックアップに含まれません`,spoolUsageUnresolved:`使用履歴 {{count}} 件をスキップしました - 対応するスプールがこのバックアップのスプール一覧にないため、紐付ける先がありません。`,spoolUsageUnlinked:`使用履歴 {{count}} 件を印刷履歴へのリンクなしで復元しました - リンクを保持するにはスプール在庫と一緒に印刷アーカイブも選択してください。`,spoolTagKept:`スプールタグ {{count}} 件をそのままにしました - バックアップの内容ではその後スキャンされたタグが消えるか、別のスプールに移ってしまうためです。`,settingsCredentialsSkipped:`認証情報のようなキー {{count}} 件をスキップしました - シークレットは手動で再入力してください`,settingsAuthSkipped:`認証設定 {{count}} 件をスキップしました - ロックアウトチェックが働くよう、設定 > 認証で変更してください`,settingsCompanionSkipped:`{{keys}} はオフのままにしました - 各項目に必要な認証情報はバックアップから復元できず、このインスタンスにも保存されていないため、オンにすると連携が未認証のままになります`,settingsMqttRelayFailed:`MQTT 設定を復元しましたが、リレーを再接続できませんでした - Bambuddy を再起動してください`,kprofilesAlwaysOverwrite:`K プロファイルは常にプリンター側の該当スロットを上書きします`,kprofilesAckUnreliable:`応答しないプリンターも復元済みとして数えます - プロファイルはプリンター側で確認してください`,kprofilesPrinterMissing:`シリアル {{serial}} のプリンターがありません - スキップしました`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) は接続されていません - スキップしました`,kprofilesUnknownNozzle:`{{serial}} に想定外のノズル径 {{nozzle}} - そのまま送信しました`,kprofilesUnmatched:`{{nozzle}} 用のプロファイル {{count}} 件は {{printer}} に該当がありませんでした - 新規プロファイルとして追加しました`,kprofilesSendFailed:`{{nozzle}} のプロファイルを {{printer}} ({{serial}}) に送信できませんでした`,kprofilesRefused:`{{printer}} ({{serial}}) が {{nozzle}} のプロファイルを拒否しました: {{reason}}`,kprofilesStepFailed:`K プロファイルの処理を完了できませんでした - {{reason}}。それまでに復元された内容は保存されています。`}},history:`履歴`,clear:`クリア`,date:`日付`,status:`ステータス`,trigger:`種類`,triggers:{manual:`バックアップ（手動）`,scheduled:`バックアップ（スケジュール）`,restore:`復元`},commit:`コミット`,localBackup:`ローカルバックアップ`,localBackupDescription:`データベース、アーカイブ、アップロード、すべてのファイルを含むBambuddyデータの完全なバックアップを作成します。`,downloadBackupLabel:`バックアップをダウンロード`,completeBackupZip:`完全バックアップ: データベース + 全ファイル (ZIP)`,download:`ダウンロード`,preparingBackup:`バックアップを準備しています...`,creatingArchive:`バックアップアーカイブを作成しています...大きなアーカイブの場合、時間がかかることがあります。`,downloadingFile:`バックアップファイルをダウンロードしています...`,backupDownloaded:`バックアップのダウンロードが成功しました`,failedToCreateBackup:`バックアップの作成に失敗しました: {{message}}`,restore:`復元`,restoreReplacesAll:`復元はすべてのデータを置き換えます。`,restoreReplacesAllDetail:`現在のデータベースとファイルは完全に置き換えられます。復元後に再起動が必要です。`,restoreConfirmTitle:`バックアップを復元`,restoreConfirmMessage:`"{{filename}}"から復元してもよろしいですか？現在のデータベースとすべてのファイルが完全に置き換えられます。復元後にアプリケーションの再起動が必要です。`,restoreConfirmButton:`バックアップを復元`,uploadingFile:`バックアップファイルをアップロードしています...`,backupRestoredRestart:`バックアップが復元されました。Bambuddyを再起動してください。`,failedToRestore:`バックアップの復元に失敗しました。ファイル形式を確認してください。`,reloadNow:`今すぐリロード`,creatingBackup:`バックアップを作成中`,restoringBackup:`バックアップを復元中`,preparing:`準備中...`,processing:`処理中...`,doNotClosePage:`このページを閉じたり、移動しないでください。大きなバックアップの場合、この操作には数分かかることがあります。`,restoring:`復元中...`,restoreComplete:`復元完了`,restoreFailed2:`復元失敗`,importSettings:`バックアップファイルから設定をインポート`,pleaseWaitRestoring:`データの復元中です。お待ちください`,selectBackupFile:`クリックしてバックアップファイルを選択 (.jsonまたは.zip)`,duplicateHandling:`重複処理の仕組み:`,matchPrinters:`プリンター`,matchPrintersBy:`シリアル番号で照合`,matchSmartPlugs:`スマートプラグ`,matchSmartPlugsBy:`IPアドレスで照合`,matchNotificationProviders:`通知プロバイダー`,matchNotificationProvidersBy:`名前で照合`,matchFilaments:`フィラメント`,matchFilamentsBy:`名前 + タイプ + ブランドで照合`,matchArchives:`アーカイブ`,matchArchivesBy:`コンテンツハッシュで照合（常にスキップ）`,matchPendingUploads:`保留中のアップロード`,matchPendingUploadsBy:`ファイル名で照合`,matchSettingsTemplates:`設定とテンプレート`,matchSettingsTemplatesBy:`常に上書き`,replaceExisting:`既存のデータを置き換え`,keepExisting:`既存のデータを保持`,overwriteDescription:`既に存在する項目をバックアップデータで上書き`,keepDescription:`まだ存在しない項目のみ復元`,overwriteCaution:`注意:`,overwriteWarning:`上書きすると、現在の設定がバックアップのデータで置き換えられます。プリンターのアクセスコードはセキュリティのため上書きされません。`,cancel:`キャンセル`,processingBackup:`バックアップファイルを処理しています...`,itemsRestored:`復元済み`,itemsSkipped:`スキップ済み`,restored:`復元済み`,skippedAlreadyExist:`スキップ（既に存在）`,filesCategory:`ファイル（3MF、サムネイルなど）`,andMore:`...他{{count}}件`,newApiKeysGenerated:`新しいAPIキーが生成されました`,keysShownOnce:`これらのキーは一度だけ表示されます。今すぐコピーしてください！`,copy:`コピー`,noDataFound:`バックアップファイルに復元するデータが見つかりませんでした。`,close:`閉じる`,scheduledBackup:`スケジュールされたバックアップ`,scheduledBackupDescription:`スケジュールに基づいてバックアップスナップショットを自動作成。出力ディレクトリはNASや外部ストレージにマウント可能。`,frequency:`頻度`,backupTime:`時間`,retention:`保持期間`,retentionDescription:`保持するバックアップ数`,outputPath:`出力パス`,outputPathPlaceholder:`デフォルト: {{path}}`,outputPathDescription:`デフォルトの場所を使用する場合は空白のまま`,runNow:`今すぐ実行`,backupFiles:`バックアップファイル`,noScheduledBackups:`バックアップなし`,deleteBackup:`削除`,deleteBackupConfirm:`このバックアップファイルを削除しますか？`,backupRunning:`バックアップ中...`,scheduledBackupComplete:`バックアップが正常に完了しました`,scheduledBackupFailed:`バックアップに失敗`,nextBackup:`次回バックアップ`,backupSize:`サイズ`,localTimeHint:`現地時刻 ({{tz}})`,defaultPathLabel:`デフォルト:`,pathCheck:{title:`Bambuddy はこのディレクトリに書き込めません`,howToFix:`対処方法:`,sandboxed:`Bambuddy サービスは {{path}} に書き込めません。systemd ユニットが ProtectSystem=strict で動作しているため、インストール・データ・ログの各ディレクトリ以外はすべてサービスから読み取り専用になります。自分のシェルからは書き込める場所であっても同様です。`,read_only:`{{path}} は読み取り専用のファイルシステム上にあります。`,permission_denied:`Bambuddy には {{path}} への書き込み権限がありません。ディレクトリの所有者とパーミッションを確認してください。`,no_space:`{{path}} があるファイルシステムに空き容量がありません。`,not_a_directory:`{{path}} は存在しますが、ディレクトリではありません。`,missing:`{{path}} は存在せず、作成もできませんでした。`,error:`Bambuddy は {{path}} に書き込めません。`,ephemeralTitle:`これらのバックアップはコンテナの再作成で失われます`,container_ephemeral:`{{path}} はホストではなく Bambuddy コンテナ内にあります。そこに書き込まれたバックアップはコンテナを再作成すると失われます。ホスト側のディレクトリをマウントしてください:`},categories:{settings:`設定`,notification_providers:`通知プロバイダー`,notification_templates:`通知テンプレート`,smart_plugs:`スマートプラグ`,printers:`プリンター`,filaments:`フィラメント`,maintenance_types:`メンテナンスタイプ`,archives:`アーカイブ`,projects:`プロジェクト`,pending_uploads:`保留中のアップロード`,external_links:`外部リンク`,api_keys:`APIキー`}},tags:{title:`タグ`,addTag:`タグを追加`,editTag:`タグを編集`,deleteTag:`タグを削除`,tagName:`タグ名`,tagColor:`タグの色`,noTags:`タグがありません`,deleteConfirm:`このタグを削除しますか？`,manageTags:`タグを管理`},uploadModal:{title:`3MFファイルのアップロード`,dragDrop:`.3mfファイルをここにドラッグ＆ドロップ`,or:`または`,browseFiles:`ファイルを参照`,extractionInfo:`プリンターモデルは3MFファイルのメタデータから自動的に抽出されます。`,uploaded:`アップロード済み`,failed:`アップロードに失敗しました`,uploading:`アップロード中...`,upload:`アップロード`,uploadFailed:`アップロード失敗`},editArchive:{title:`アーカイブを編集`,name:`名前`,namePlaceholder:`印刷名`,printer:`プリンター`,noPrinter:`プリンターなし`,project:`プロジェクト`,noProject:`プロジェクトなし`,itemsPrinted:`印刷数`,itemsPrintedHelp:`この印刷ジョブで製造したアイテム数。プレート全体が失敗した場合は 0 を入力します。`,filamentUsed:`使用フィラメント (g)`,filamentUsedPlaceholder:`例: 46.16`,filamentUsedHelp:`3MF なしでアーカイブされた印刷は、手入力するとフィラメント合計に反映されます。3MF があるアーカイブを再スキャンすると、この値はファイルから読み直されます。`,notes:`メモ`,notesPlaceholder:`この印刷についてメモを追加...`,externalLink:`外部リンク`,externalLinkPlaceholder:`https://...`,externalLinkHelp:`Printables、Thingiverse、その他のソースへのリンク`,tags:`タグ`,tagsPlaceholder:`タグを追加...`,addMoreTags:`タグをさらに追加...`,matchingTags:`"{{query}}" に一致`,existingTags:`既存のタグ`,clickToAdd:`（クリックして追加）`,status:`ステータス`,failureReason:`失敗理由`,selectReason:`理由を選択...`,photos:`印刷結果の写真`,photosHelp:`+ をクリックして印刷結果の写真を追加`,printResult:`印刷結果`,saving:`保存中...`,failureReasons:{adhesionFailure:`定着不良`,spaghettiDetached:`スパゲッティ / 剥離`,layerShift:`レイヤーシフト`,cloggedNozzle:`ノズル詰まり`,filamentRunout:`フィラメント切れ`,warping:`反り`,stringing:`糸引き`,underExtrusion:`押出不足`,powerFailure:`電源障害`,userCancelled:`ユーザーによるキャンセル`,noStatusUpdate:`ステータス更新を受信できませんでした`,other:`その他`},statuses:{completed:`完了`,failed:`失敗`,aborted:`キャンセル`,printing:`印刷中`}},kProfiles:{title:`Kプロファイル`,noPrintersConfigured:`プリンターが設定されていません`,addPrinterInSettings:`Kプロファイルを管理するには設定でプリンターを追加してください`,noActivePrinters:`アクティブなプリンターがありません`,enablePrinterConnection:`Kプロファイルを表示するにはプリンター接続を有効にしてください`,loadingProfiles:`Kプロファイルを読み込み中...`,printerOffline:`プリンターオフライン`,printerOfflineDesc:`選択したプリンターは接続されていません。電源を入れてKプロファイルを表示してください。`,noMatchingProfiles:`一致するプロファイルなし`,noMatchingProfilesDesc:`検索条件に一致するプロファイルがありません`,noKProfiles:`Kプロファイルなし`,noKProfilesDesc:`{{diameter}}mmノズル用の圧力キャリブレーションプロファイルが見つかりません`,createFirstProfile:`最初のプロファイルを作成`,printer:`プリンター`,nozzle:`ノズル`,refresh:`更新`,addProfile:`K-プロファイルを追加`,export:`エクスポート`,import:`インポート`,select:`選択`,selectAll:`すべて選択`,delete:`削除`,searchPlaceholder:`名前またはフィラメントで検索...`,allExtruders:`すべてのエクストルーダー`,leftOnly:`左のみ`,rightOnly:`右のみ`,allFlow:`すべてのフロー`,hfOnly:`HFのみ`,sOnly:`Sのみ`,sortName:`ソート: 名前`,sortKValue:`ソート: K値`,sortFilament:`ソート: フィラメント`,leftExtruder:`左エクストルーダー`,rightExtruder:`右エクストルーダー`,modal:{addTitle:`Kプロファイルを追加`,editTitle:`Kプロファイルを編集`,profileName:`プロファイル名`,profileNamePlaceholder:`マイPLAプロファイル`,kValue:`K値`,kValuePlaceholder:`0.020`,kValueHelp:`一般的な範囲: PLA 0.01〜0.06、PETG 0.02〜0.10`,filament:`フィラメント`,selectFilament:`フィラメントを選択...`,source:{local:`インポート済み`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`内蔵`},noFilamentsHelp:`利用できるフィラメントがありません。Bambu Cloud にログインするか、プロファイル → ローカルプロファイル でプリセットをインポートしてください。`,searchFilaments:`フィラメントを検索...`,noFilamentMatches:`検索に一致するフィラメントはありません`,flowType:`フロータイプ`,highFlow:`ハイフロー`,standard:`スタンダード`,nozzleSize:`ノズルサイズ`,extruder:`エクストルーダー`,extruders:`エクストルーダー`,left:`左`,right:`右`,notes:`メモ（ローカル保存）`,notesPlaceholder:`このプロファイルのメモを追加...`,notesHelp:`メモはBambuddyに保存され、プリンターには保存されません`,syncing:`プリンターと同期中...`,savingExtruder:`エクストルーダーに保存中 {{current}}/{{total}}...`,pleaseWait:`お待ちください`},deleteConfirm:{title:`プロファイルを削除`,cannotUndo:`元に戻せません`,message:`「{{name}}」をプリンターから削除しますか？`},bulkDelete:{title:`プロファイルを削除`,cannotUndo:`元に戻せません`,message:`選択した{{count}}件のプロファイルをプリンターから削除しますか？`},toast:{profileSaved:`Kプロファイルを保存しました`,profilesSaved:`Kプロファイルを{{count}}台のエクストルーダーに保存しました`,selectAtLeastOneExtruder:`エクストルーダーを1つ以上選択してください`,selectFilament:`先にフィラメントを選択してください`,filamentNotResolvable:`{{name}} に対応する Bambu フィラメント ID がないため、プリンターはプロファイルを保存できません`,profileDeleted:`Kプロファイルを削除しました`,profilesDeleted:`{{count}}件のプロファイルを削除しました`,exportedProfiles:`{{count}}件のプロファイルをエクスポートしました`,importedProfiles:`{{total}} 件中 {{count}} 件のプロファイルをインポートしました`,noProfilesToExport:`エクスポートするプロファイルがありません`,invalidFileFormat:`無効なファイル形式`,failedToParseImport:`インポートファイルの解析に失敗しました`,failedToSaveBatch:`Kプロファイルの保存に失敗しました`,noteSaved:`メモを保存しました`,failedToSaveNote:`メモの保存に失敗しました`},permission:{noRead:`プロファイルを更新する権限がありません`,noCreate:`プロファイルを追加する権限がありません`,noUpdate:`Kプロファイルを更新する権限がありません`,noDelete:`Kプロファイルを削除する権限がありません`,noExport:`プロファイルをエクスポートする権限がありません`,noImport:`プロファイルをインポートする権限がありません`}},virtualPrinter:{title:`仮想プリンター`,running:`稼働中`,stopped:`停止`,description:{default:`Bambu StudioとOrcaSlicerに表示される仮想プリンターを有効化。このプリンターに送信されたファイルは印刷せずに直接アーカイブされます。`,proxy:`スライサーのトラフィックを実際のプリンターに転送するプロキシを有効化。任意のネットワーク経由でリモート印刷が可能です。`},enable:{title:`仮想プリンターを有効化`,visibleInSlicer:`スライサーの検出リストに「Bambuddy」として表示`,proxyingTo:`{{name}}にプロキシ中`,notActive:`非アクティブ`},model:{title:`プリンターモデル`,description:`エミュレートするプリンターモデルを選択。`,restartWarning:`モデルを変更すると仮想プリンターが再起動されます`},accessCode:{title:`アクセスコード`,isSet:`アクセスコードが設定されています`,notSet:`アクセスコード未設定 - 有効化に必要です`,placeholder:`8文字のコードを入力`,placeholderChange:`新しいコードを入力して変更`,hint:`正確に8文字必要です。スライサーの認証に使用されます。`,charCount:`({{count}}/8)`,inheritedFromTarget:`ターゲットプリンターから継承`,derivedFromTargetHint:`ターゲットプリンターのアクセスコードを使用します。ブリッジはスライサーの認証情報を実機プリンターに転送するため、コードが一致している必要があります。変更するにはプリンターの設定でアクセスコードを編集してください。`,reveal:`アクセスコードを表示`,hide:`アクセスコードを隠す`},targetPrinter:{title:`ターゲットプリンター`,configured:`プロキシターゲット設定済み`,notConfigured:`ターゲットプリンター未選択 - プロキシモードに必要です`,placeholder:`プリンターを選択...`,hint:`スライサートラフィックの転送先プリンターを選択。プリンターはLANモードである必要があります。`,noPrinters:`プリンターが設定されていません。プロキシモードを使用するにはまずプリンターを追加してください。`},remoteInterface:{title:`ネットワークインターフェース上書き`,configured:`インターフェース上書き有効`,optional:`オプション — 自動検出IPが間違っている場合に使用（複数NIC、Docker、VPNなど）`,placeholder:`自動検出（デフォルト）...`,hint:`SSDPで広告され、TLS証明書に使用されるIPアドレスを上書きします。Bambuddyに複数のネットワークインターフェースがある場合に便利です。`},mode:{title:`モード`,archive:`アーカイブ`,archiveDesc:`ファイルを即座にアーカイブ`,review:`レビュー`,reviewDesc:`アーカイブ前にレビュー`,queue:`キュー`,queueDesc:`アーカイブしてキューに追加`,proxy:`プロキシ`,proxyDesc:`実際のプリンターに転送`},autoDispatch:{title:`自動ディスパッチ`,description:`キューに追加されたときに自動的に印刷を開始します。オフの場合、手動ディスパッチを待ちます。`},queueForceColorMatch:{title:`色の一致を強制`,description:`正確なフィラメントタイプと色がロードされていないプリンターへの送信を拒否します。デフォルトはオフ — これがないと、キューはモデルのみのマッチングを使用し、間違った色がロードされたプリンターを選ぶ可能性があります。`},saveAmsMapping:{title:`AMSマッピングを保存`,description:`スライサー自身が選択したAMSスロット（project_file MQTTコマンドから）をアーカイブに保存し、後で再印刷する際にファイルのタイプ/色から再導出するのではなく、同じ物理スプールを再利用できるようにします。デフォルトはオフです。`},gcodeInjection:{title:`G-codeインジェクション`,description:`設定でモデルごとに構成したG-codeスニペットを、このVPのジョブに適用します。デフォルトはオフです。`},tailscaleDisabled:{title:`Tailscale統合`,description:`このVPがTailscale経由で公開されていることをマークするには有効にしてください。スライサーに貼り付けるIPがわかるよう、ホストのTailscaleアドレスを表示します。CAインポート手順は変更されません — このトグルは証明書に影響しません。`},setupRequired:{title:`セットアップが必要です`,description:`仮想プリンター機能を使用するには追加のシステム設定が必要です。ポートフォワーディング、ファイアウォールルール、プラットフォーム固有の設定が含まれます。`,readGuide:`有効にする前にセットアップガイドをお読みください`},howItWorks:{title:`仕組み`,step1:`同じLAN上では、仮想プリンターはスライサー（Bambu Studio / OrcaSlicer）に自動的に表示されます。他のネットワークからは、IPアドレスとアクセスコードで手動で追加してください。`,step2:`アーカイブ、レビュー、キューモードでは、スライサーの「送信」ボタンを使用して3MFファイルをBambuddyにアップロードします。スライサーは「印刷成功」と表示しますが、ファイルは保存され、印刷はされません。`,step3:`プロキシモードでは、仮想プリンターはすべてのトラフィックを実際のプリンターに転送します。直接接続されているかのように印刷がすぐに開始されます。`},status:{title:`ステータス詳細`,printerName:`プリンター名`,model:`モデル`,serialNumber:`シリアル番号`,mode:`モード`,pendingFiles:`保留中のファイル`,targetPrinter:`ターゲットプリンター`,ftpPort:`FTPポート`,mqttPort:`MQTTポート`,ftpConnections:`FTP接続数`,mqttConnections:`MQTT接続数`},toast:{updated:`仮想プリンター設定を更新しました`,failedToUpdate:`設定の更新に失敗しました`,copyFailed:`コピーに失敗しました — テキストを手動で選択してください`,accessCodeRequired:`先にアクセスコードを設定してください`,targetPrinterRequired:`先にターゲットプリンターを選択してください`,bindIpRequired:`先にバインドIPを設定してください`,accessCodeEmpty:`アクセスコードは空にできません`,accessCodeLength:`アクセスコードは8文字である必要があります`,targetCodeChangedRebind:`アクセスコードが新しいターゲットプリンターに同期されました。新しいコードを反映するには、スライサーでこのデバイスを再登録してください。`,created:`仮想プリンターを作成しました`,failedToCreate:`仮想プリンターの作成に失敗しました`,deleted:`仮想プリンターを削除しました`,failedToDelete:`仮想プリンターの削除に失敗しました`},list:{title:`仮想プリンター`,add:`追加`,addFirst:`仮想プリンターを追加`,empty:`仮想プリンターが設定されていません。追加して始めましょう。`},bindIp:{title:`バインドインターフェース`,placeholder:`インターフェースを選択...`,hint:`この仮想プリンターがバインドするネットワークインターフェース。プリンターごとに一意である必要があります。`},proxy:{accessCodeHint:`プロキシモードでは、スライサーにターゲットプリンターのアクセスコードを使用してください。接続は実際のプリンターに透過的に転送されます。`},addDialog:{title:`仮想プリンターを追加`,name:`名前`,hint:`アクセスコード、ターゲットプリンター、その他の設定は作成後に設定できます。`,create:`作成`},deleteConfirm:{title:`仮想プリンターを削除`,message:`「{{name}}」を削除してもよろしいですか？このプリンターのすべてのサービスが停止されます。`},archiveNameSource:{title:`アーカイブ名のソース`,description:`仮想プリンター経由でファイルが到着したときに、新しいアーカイブをどのように命名するかを選択します。「メタデータ」は3MFに埋め込まれたスライサータイトル（デフォルト）を使用します。「ファイル名」はBambu StudioがFTPで送信したファイル名を使用します。注: Bambu Studioは、3MFにタイトルフィールドが存在する場合、「プリンターに送信」ダイアログで入力した名前をその値で上書きするため、両方のモードで同じ文字列になることが多くあります。`,metadata:`メタデータ`,filename:`ファイル名`},caCert:{title:`スライサー証明書`,description:`仮想プリンターは Bambuddy CA が署名した TLS 証明書を使用します。この CA 証明書をスライサーの信頼ストアに一度インポートすると接続が受け入れられます — コマンドラインからコピーする必要はありません。`,copy:`コピー`,copied:`コピーしました`,download:`ダウンロード`,fingerprint:`SHA-256`}},modelViewer:{openInSlicer:`スライサーで開く`,openInSlicerWith:`{{slicer}}で開く`,moreSlicerOptions:`その他のスライサーオプション`,openInSlicerFailed:`スライサーで開けませんでした`,tabs:{model:`3Dモデル`},notAvailable:`利用不可`,plates:`プレート`,allPlates:`全プレート`,plateNumber:`プレート {{number}}`,plateCount:`{{count}} プレート`,plateCount_other:`{{count}} プレート`,objectCount:`{{count}} オブジェクト`,objectCount_other:`{{count}} オブジェクト`,filamentCount:`{{count}} フィラメント`,filamentCount_other:`{{count}} フィラメント`,eta:`予想時間 {{minutes}} 分`,noPreview:`このファイルのプレビューは利用できません`,pagination:{pageOf:`ページ {{current}} / {{total}}`,prev:`前へ`,next:`次へ`},errors:{failedToLoad:`ファイルの読み込みに失敗しました`,noMeshes:`3MFファイルにメッシュが見つかりません`,unsupportedFormat:`サポートされていないファイル形式です`}},maintenanceDescriptions:{lubricateCarbonRods:`カーボンロッドに潤滑剤を塗布してスムーズな動きを確保`,lubricateRails:`リニアレールの潤滑`,cleanNozzle:`ノズル/ホットエンドの清掃`,checkBelts:`ベルト張力の確認`,cleanBuildPlate:`ビルドプレートの清掃`,checkExtruder:`エクストルーダーギアの確認`,checkCooling:`冷却ファンの確認`,generalInspection:`総合点検`,cleanCarbonRods:`カーボンロッドの清掃`,lubricateSteelRods:`スチールロッドに潤滑剤を塗布してスムーズな動きを確保`,cleanSteelRods:`スチールロッドの清掃`,cleanLinearRails:`リニアレールを拭いてほこりや汚れを除去`,checkPtfeTube:`PTFEチューブの確認`,replaceHepaFilter:`HEPAフィルター交換`,replaceCarbonFilter:`カーボンフィルター交換`,lubricateLeftNozzleRail:`左ノズルレールの潤滑`},haSensors:{label:`センサー`,unavailable:`利用不可`,blocksPrints:`{{entity}} — アラート中は印刷を保留します`,states:{open:`開`,closed:`閉`,unlocked:`解錠`,locked:`施錠`,detected:`検知`,clear:`なし`,wet:`濡れ`,dry:`乾燥`,problem:`異常`,ok:`正常`,running:`作動中`,stopped:`停止`,on:`オン`,off:`オフ`},sectionTitle:`Home Assistant センサー（プリンター）`,add:`センサーを追加`,addTitle:`Home Assistant センサーを追加`,editTitle:`Home Assistant センサーを編集`,empty:`センサーがまだありません。Home Assistant のドアセンサーや温度計を連携すると、プリンターカードに表示されます。`,unknownPrinter:`不明なプリンター`,badgeBlocks:`印刷を保留`,badgeNotifies:`通知する`,badgeHidden:`カードに非表示`,printer:`プリンター`,entity:`エンティティ`,searchPlaceholder:`エンティティを検索...`,noEntities:`一致するエンティティがありません`,name:`表示名`,alertWhen:`アラート条件`,alertNever:`なし — 表示のみ`,alertAbove:`しきい値超過`,alertBelow:`しきい値未満`,alertHint:`アラート状態になるとプリンターカードで強調表示され、下のオプションが有効になります。`,showOnCard:`プリンターカードに表示`,notifyOnAlert:`アラート発生時に通知を送信`,blockPrint:`アラート中はキューの印刷を保留`,blockPrintHint:`ジョブはキューに残り、センサーが解除されると自動的に開始します。Home Assistant に接続できない間は無視されます。`,toast:{created:`センサーを追加しました`,updated:`センサーを保存しました`,deleted:`センサーを削除しました`},error:{pickEntity:`Home Assistant のエンティティを選択してください`,nameRequired:`表示名を入力してください`,printerRequired:`プリンターを選択してください`,alertRequired:`先にアラート条件を設定してください`}},locationHaSensors:{sectionTitle:`Home Assistant センサー（保管場所）`,sectionDescription:`Home Assistant の温度・湿度・バッテリーセンサーを保管場所に紐づけると、フィラメントカードと一覧表にリアルタイムの値が表示されます。1つの保管場所につき、各カテゴリーで登録できるセンサーは1つだけです。`,add:`センサーを追加`,addTitle:`Home Assistant センサーを追加`,editTitle:`Home Assistant センサーを編集`,empty:`センサーがまだありません。Home Assistant の温度・湿度センサーを連携すると、フィラメントカードに表示されます。`,unknownLocation:`不明な保管場所`,location:`保管場所`,showOnCard:`フィラメントカードに表示`,overwriteConfirm:{title:`既存のセンサーを置き換えますか？`,messageTemperature:`「{{location}}」には既に温度センサーが連携されています: {{name}}。続行するとこれが置き換えられます。`,messageHumidity:`「{{location}}」には既に湿度センサーが連携されています: {{name}}。続行するとこれが置き換えられます。`,messageBattery:`「{{location}}」には既にバッテリーセンサーが連携されています: {{name}}。続行するとこれが置き換えられます。`},autoAdd:{confirmTitle:`他のセンサーも追加しますか？`,confirmMessage:`Bambuddy がこの保管場所の他のセンサーも見つけました。追加するものを選んでください。`,added:`追加で連携しました: {{names}}`,noneFound:`この保管場所に一致する温度・湿度・バッテリーセンサーが見つかりませんでした。`,onlyThisOne:`これだけ`},options:{buttonLabel:`センサーオプション`,title:`保管場所センサーのオプション`,description:`この値は、保管場所の最初のセンサーと一緒に温度・湿度・バッテリーセンサーが自動的に連携される際に使用されます。`,generalSettings:`一般設定`,pollInterval:`更新間隔（秒）`,pollIntervalHint:`Bambuddyがホームアシスタントに問い合わせて画面上のセンサー値を更新する頻度です。最小60秒。`,colorizeValues:`アラートしきい値に応じてセンサー値を色分け表示`,aboveColor:`しきい値超過時の色`,belowColor:`しきい値未満時の色`,optimalColor:`最適値の色`,colors:{red:`赤`,orange:`オレンジ`,yellow:`黄`,green:`緑`,blue:`青`,purple:`紫`,pink:`ピンク`},saved:`オプションを保存しました`,saveFailed:`オプションの保存に失敗しました`,reset:`リセット`,resetConfirm:{title:`既存のすべての保管場所センサーをリセットしますか？`,message:`これにより、既存のすべての保管場所の温度・湿度・バッテリーセンサーのアラートしきい値、通知、カード表示設定が上記の値で上書きされ、各センサーの名前も Home Assistant のフレンドリーネームに戻されます（プリンターのセンサーには影響しません）。この操作は元に戻せません。センサーの数によっては、少し時間がかかる場合があります。`},resetDone:`{{count}} 件の保管場所センサーに適用しました`,resetFailed:`保管場所センサーのリセットに失敗しました`},deleteAllConfirm:{title:`すべてのセンサーを削除しますか？`,message:`「{{location}}」に連携されているすべてのセンサー（{{count}}個）を削除します。この操作は元に戻せません。`},currentlyBound:`現在のバインド先: {{entity}}`,error:{locationRequired:`保管場所を選択してください`},toast:{created:`センサーを追加しました`,updated:`センサーを保存しました`,deleted:`センサーを削除しました`}},smartPlugs:{offline:`オフライン`,admin:`管理`,openPlugAdminPage:`プラグ管理ページを開く`,deleteSmartPlug:`スマートプラグを削除`,turnOnSmartPlug:`スマートプラグをオンにする`,turnOffSmartPlug:`スマートプラグをオフにする`,turnOn:`オンにする`,turnOff:`オフにする`,addSmartPlug:{scanningNetwork:`ネットワークをスキャン中...`,chooseEntity:`エンティティを選択...`,connectionFailed:`接続失敗`,searchEntities:`エンティティを検索...`,searchPowerSensors:`電力センサーを検索...`,searchEnergySensors:`エネルギーセンサーを検索...`,placeholders:{plugName:`リビングルームプラグ`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`電力トピックと同じ、または異なる`}},linkedTo:`リンク先:`,monitorOnly:`監視のみ`,alerts:`アラート`,scheduleOn:`オン {{time}}`,scheduleOff:`オフ {{time}}`,on:`オン`,off:`オフ`,power:`電力`,kwhToday:`本日のkWh`,settings:`設定`,automationSettings:`自動化設定`,showInSwitchbar:`スイッチバーに表示`,quickAccessSidebar:`サイドバーからクイックアクセス`,enabled:`有効`,enableAutomation:`このプラグの自動化を有効にする`,autoOn:`自動オン`,autoOnDescription:`印刷開始時にオンにする`,autoOff:`自動オフ`,autoOffDescription:`印刷完了時にオフにする（ワンショット）`,autoOffPersistent:`有効のまま維持`,autoOffPersistentDescription:`ワンショットではなく印刷間で有効のまま維持`,controlsPrinterPower:`プリンターに給電`,controlsPrinterPowerDescription:`このプラグがアクセサリー（フィルターファン、照明）のみに給電する場合はオフにします。オンのままだと、電源を切ったときにプリンターがオフラインとして扱われます。`,autoOffAfterDrying:`乾燥完了後に自動オフ`,autoOffAfterDryingDescription:`AMSの乾燥が完了したらオフにする`,delayAfterDryingMinutes:`乾燥後の遅延（分）`,turnOffDelayMode:`オフ遅延モード`,time:`時間`,temp:`温度`,delayMinutes:`遅延（分）`,tempThreshold:`温度しきい値（°C）`,tempThresholdDescription:`ノズルがこの温度以下に冷却されるとオフになります`,edit:`編集`,deleteConfirm:`"{{name}}"を削除してもよろしいですか？この操作は取り消せません。`,turnOnConfirm:`"{{name}}"をオンにしてもよろしいですか？`,turnOffConfirm:`"{{name}}"をオフにしてもよろしいですか？接続されたデバイスの電源が切れます。`,failedToTurn:`"{{name}}"を{{action}}できませんでした`,unknown:`不明`,addTitle:`スマートプラグを追加`,editTitle:`スマートプラグを編集`,stopScanning:`スキャン停止`,discoverTasmota:`Tasmotaデバイスを検出`,foundDevices:`{{count}}台のデバイスが見つかりました - クリックして選択:`,noDevicesFound:`ネットワーク上にTasmotaデバイスが見つかりません`,haNotConfigured:`Home Assistantが設定されていません。設定場所:`,haSettingsPath:`設定 → ネットワーク → Home Assistant`,selectEntity:`エンティティを選択 *`,ipAddress:`IPアドレス *`,nameLabel:`名前 *`,username:`ユーザー名`,password:`パスワード`,authHint:`Tasmotaデバイスが認証を必要としない場合は空のままにしてください`,linkToPrinter:`プリンターにリンク`,noPrinter:`プリンターなし（手動制御のみ）`,linkingDescription:`リンクすると印刷開始/完了時に自動でオン/オフできます`,powerAlerts:`電力アラート`,alertAbove:`上限アラート（W）`,alertBelow:`下限アラート（W）`,alertDescription:`電力消費がこれらのしきい値を超えた場合に通知します。無効にするには空のままにしてください。`,dailySchedule:`デイリースケジュール`,turnOnAt:`オンにする時刻`,turnOffAt:`オフにする時刻`,scheduleDescription:`毎日これらの時刻にプラグを自動的にオン/オフします。スキップするには空のままにしてください。`,showOnPrinterCard:`プリンターカードに表示`,displayOnPrinterCard:`プリンターカードにボタンを表示`,connectedResult:`接続成功！`,deviceLabel:`デバイス: {{name}} - `,stateLabel:`状態: {{state}}`,test:`テスト`,delete:`削除`,save:`保存`,add:`追加`,cancel:`キャンセル`,failedToStartScan:`スキャンを開始できませんでした`,nameRequired:`名前は必須です`,entityRequired:`Home AssistantプラグにはエンティティIDが必要です`,mqttTopicRequired:`電力、エネルギー、または状態監視用に少なくとも1つのMQTTトピックを設定する必要があります`,loadingEntities:`エンティティを読み込み中...`,loading:`読み込み中...`,failedToLoadEntities:`エンティティの読み込みに失敗しました: {{error}}`,noEntitiesMatching:`"{{search}}"に一致するエンティティが見つかりません`,noEntitiesAvailable:`利用可能なエンティティがありません`,searchingEntities:`すべてのエンティティを検索中（{{count}}件見つかりました）`,showingEntities:`switch、light、input_booleanを表示（{{count}}件利用可能）`,energyMonitoringOptional:`エネルギー監視（オプション）`,energyMonitoringHint:`電力/エネルギーデータを提供するセンサーを検索して選択します。`,powerSensorW:`電力センサー（W）`,energyTodayKwh:`本日のエネルギー（kWh）`,totalEnergyKwh:`総エネルギー（kWh）`,noMatchingSensors:`一致するセンサーがありません`,none:`なし`,mqttNotConfigured:`MQTTブローカーが設定されていません。ブローカーアドレスを設定してください:`,mqttSettingsPath:`設定 → ネットワーク → MQTT配信`,mqttNotConfiguredSuffix:`（配信を有効にする必要はありません。ブローカーの詳細を入力するだけです）。`,mqttMonitorOnlyDescription:`MQTTプラグはMQTTサブスクリプション経由で電力/エネルギーデータを受信します。オン/オフ制御は利用できません - MQTTブローカーまたはホームオートメーションシステムを使用してください。`,powerMonitoring:`電力監視`,energyMonitoring:`エネルギー監視`,stateMonitoring:`状態監視`,optional:`オプション`,topic:`トピック`,jsonPath:`JSONパス`,multiplier:`乗数`,onValue:`ON値`,mqttPowerHint:`JSONパスはJSONペイロードから値を抽出します（例: "power_l1"）。トピックが生の数値を送信する場合は空のままにしてください。
+Valeur ON : la chaîne exacte signifiant "ON". Laisser vide pour la détection auto (ON, true, 1).`,restControl:`Contrôle`,restOnUrl:`URL d'activation`,restOffUrl:`URL de désactivation`,restOnBody:`Corps de requête ON`,restOffBody:`Corps de requête OFF`,restMethod:`Méthode HTTP`,restHeaders:`Custom Headers (JSON)`,restStatusUrl:`URL de statut`,restStatusPath:`Chemin JSON état`,restStatusOnValue:`Valeur ON`,restPowerUrl:`URL de puissance`,restPowerPath:`Chemin JSON puissance`,restPowerMultiplier:`Multiplicateur de puissance`,restEnergyUrl:`URL d'énergie`,restEnergyPath:`Chemin JSON de l'énergie (aujourd'hui)`,restEnergyTotalPath:`Chemin JSON de l'énergie (compteur total)`,restEnergyTotalMultiplier:`Multiplicateur du compteur total`,restEnergyTotalPathHint:`ex. aenergy.total`,restEnergyTotalHint:`Beaucoup de prises — tous les Shelly notamment — ne fournissent qu'un compteur cumulé qui ne se remet jamais à zéro. Il va ici, pas dans le champ ci-dessus : lu comme la consommation du jour, il ne repartirait jamais de zéro à minuit, et Hier et Total resteraient vides. Bambuddy en déduit Aujourd'hui et Hier, ce qui demande un à deux jours de relevés. Un Shelly renvoie des wattheures : utilisez un multiplicateur de 0.001.`,restEnergyMultiplier:`Multiplicateur d'énergie`,restUrlRequired:`Au moins une URL (ON ou OFF) est requise pour les prises REST`,restHeadersHint:`par ex. {"Authorization": "Bearer your-token"}`,restBodyHint:`par ex. ON, {"state": "on"}`,restStatusHint:`URL pour interroger l'état actuel`,restPathHint:`par ex. state ou data.power.status`,restPowerUrlHint:`URL séparée pour les données de puissance (utilise l'URL de statut si vide)`,restEnergyUrlHint:`URL séparée pour les données d'énergie (utilise l'URL de statut si vide)`,restEnergyHint:`Chaque valeur peut utiliser sa propre URL ou se rabattre sur l'URL de statut. Utilisez les multiplicateurs pour la conversion d'unités (ex : 0.001 pour convertir Wh en kWh).`,testConnection:`Tester la connexion`,connectionSuccess:`Connexion réussie`,noSwitchesInSwitchbar:`Aucun commutateur dans la barre`,enableSwitchbarHint:`Activez "Afficher dans la barre de commutateurs" dans Paramètres > Smart Plugs`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`E-mail`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`Notifications par e-mail SMTP`,telegram:`Notifications via un bot Telegram`,discord:`Envoyer vers un canal Discord via webhook`,ntfy:`Notifications push gratuites, auto-hébergeables`,pushover:`Notifications push simples et fiables`,callmebot:`Notifications WhatsApp gratuites via CallMeBot`,webhook:`POST HTTP générique vers n'importe quelle URL`,homeassistant:`Notifications persistantes dans le tableau de bord Home Assistant`,bark:`Notifications push iOS via Bark (auto-hébergeable)`},lastSuccess:`Dernier : {{date}}`,error:`Erreur`,printer:`Imprimante :`,allPrinters:`Toutes les imprimantes`,sendTestNotification:`Envoyer une notification de test`,eventSettings:`Paramètres des événements`,enabled:`Activé`,sendFromProvider:`Envoyer des notifications depuis ce fournisseur`,printEvents:`Événements d'impression`,printerStatus:`État de l'imprimante`,amsAlarms:`Alarmes AMS`,amsHtAlarms:`Alarmes AMS-HT`,printQueue:`File d'attente d'impression`,start:`Début`,plateCheck:`Vérification du plateau`,complete:`Terminé`,failed:`Échoué`,stopped:`Arrêté`,progress:`Progression`,offline:`Hors ligne`,lowFilament:`Filament bas`,maintenance:`Maintenance`,amsHumidity:`Humidité AMS`,amsTemp:`Temp. AMS`,amsDryingSuspended:`Séchage suspendu`,amsHtHumidity:`Humidité AMS-HT`,amsHtTemp:`Temp. AMS-HT`,bedCooled:`Plateau refroidi`,firstLayer:`Première couche`,quiet:`Silencieux`,digest:`Résumé {{time}}`,printStarted:`Impression démarrée`,plateNotEmpty:`Plateau non vide`,plateNotEmptyDescription:`Objets détectés avant l'impression`,plateClearRequired:`Plateau à libérer`,plateClearRequiredDescription:`Impression terminée, la file attend la confirmation`,plateClear:`Plateau libre`,printCompleted:`Impression terminée`,bedCooledLabel:`Plateau refroidi`,bedCooledDescription:`Plateau refroidi sous le seuil après l'impression`,firstLayerCompleteLabel:`Première couche terminée`,firstLayerCompleteDescription:`Notification avec photo après la première couche`,missingSpoolAssignmentLabel:`Affectation de bobine manquante`,billingChargeFailedLabel:`Échec de facturation`,billingChargeFailedDescription:`Notifier lorsque les coûts d'impression ne peuvent pas être enregistrés`,missingSpoolAssignmentDescription:`Notifier quand une impression démarre et que des bacs requis n'ont pas de bobine assignée`,printFailed:`Impression échouée`,printStopped:`Impression arrêtée`,progressMilestones:`Jalons de progression`,progressMilestonesDescription:`Notifier à 25 %, 50 %, 75 %`,printerOffline:`Imprimante hors ligne`,printerError:`Erreur de l'imprimante`,aiFailureDetection:`Détection de défaillance par IA`,aiFailureDetectionDescription:`Notifier lorsque l'IA Obico détecte une défaillance d'impression possible`,lowFilamentLabel:`Filament bas`,maintenanceDue:`Maintenance requise`,maintenanceDueDescription:`Notifier lorsqu'une maintenance est nécessaire`,amsHumidityHigh:`Humidité AMS élevée`,amsHumidityHighDescription:`L'humidité de l'AMS standard dépasse le seuil`,amsTemperatureHigh:`Température AMS élevée`,amsTemperatureHighDescription:`La température de l'AMS standard dépasse le seuil`,amsDryingSuspendedTitle:`Séchage automatique suspendu`,amsDryingSuspendedDescription:`Le séchage automatique a abandonné une unité AMS car l'humidité n'est jamais descendue sous le seuil`,amsHtHumidityHigh:`Humidité AMS-HT élevée`,amsHtHumidityHighDescription:`L'humidité de l'AMS-HT dépasse le seuil`,amsHtTemperatureHigh:`Température AMS-HT élevée`,amsHtTemperatureHighDescription:`La température de l'AMS-HT dépasse le seuil`,inventoryAlerts:`Alertes de stock`,stockReorderAlert:`Alerte de réapprovisionnement`,stockReorderAlertDescription:`Le SKU a atteint son point de réapprovisionnement`,stockBreakAlert:`Alerte de rupture de stock`,stockBreakAlertDescription:`Le stock sera épuisé avant l'arrivée du réapprovisionnement`,jobAdded:`Tâche ajoutée`,jobAddedDescription:`Tâche ajoutée à la file d'attente`,jobAssigned:`Tâche assignée`,jobAssignedDescription:`Tâche basée sur le modèle assignée à l'imprimante`,jobStarted:`Tâche démarrée`,jobStartedDescription:`La tâche de la file a commencé l'impression`,jobWaiting:`Tâche en attente`,jobWaitingDescription:`Tâche en attente de filament ou imprimante`,jobSkipped:`Tâche ignorée`,jobSkippedDescription:`Tâche ignorée (échec précédent)`,jobFailed:`Tâche échouée`,jobFailedDescription:`La tâche n'a pas pu démarrer`,queueComplete:`File d'attente terminée`,queueCompleteDescription:`Toutes les tâches de la file sont terminées`,quietHours:`Heures silencieuses`,noNotificationsDuring:`Aucune notification pendant ces heures`,editProviderToChangeQuietHours:`Modifier le fournisseur pour changer les heures silencieuses`,dailyDigest:`Résumé quotidien`,batchNotifications:`Regrouper les notifications en un seul résumé quotidien`,sendAt:`Envoyer à {{time}}`,editProviderToChangeDigestTime:`Modifier le fournisseur pour changer l'heure du résumé`,edit:`Modifier`,deleteProvider:`Supprimer le fournisseur de notifications`,deleteConfirm:`Êtes-vous sûr de vouloir supprimer « {{name}} » ? Cette action est irréversible.`,delete:`Supprimer`,addTitle:`Ajouter un fournisseur de notifications`,editTitle:`Modifier le fournisseur de notifications`,nameLabel:`Nom *`,namePlaceholder:`Mes notifications`,providerTypeLabel:`Type de fournisseur *`,configuration:`Configuration`,testConfiguration:`Tester la configuration`,printerFilter:`Filtre d'imprimante`,onlyFromPrinter:`Envoyer uniquement les notifications pour les événements de cette imprimante`,quietHoursDnd:`Heures silencieuses (Ne pas déranger)`,quietStart:`Début`,quietEnd:`Fin`,dailyDigestLabel:`Résumé quotidien`,sendDigestAt:`Envoyer le résumé à`,digestCollected:`Les événements seront collectés et envoyés en un seul résumé à cette heure`,notificationEvents:`Événements de notification`,progressPercent:`(25 %, 50 %, 75 %)`,bedCooledAfterPrint:`(après la fin de l'impression)`,haSensorAlert:`Alerte de capteur d'imprimante`,haSensorAlertDescription:`(un capteur Home Assistant lié nécessite votre attention)`,locationHaSensorAlert:`Alerte de capteur d'emplacement`,locationHaSensorAlertDescription:`(un capteur Home Assistant lié à un emplacement de stockage nécessite votre attention)`,eventPriority:{sectionTitle:`Priorité ntfy`,helpNtfy:`Choisissez une priorité pour chaque événement activé. ntfy l'utilise pour faire remonter les alertes (son, visibilité, comportement push). Les niveaux non définis ici utilisent la valeur par défaut du serveur ntfy.`,min:`Min.`,low:`Basse`,default:`Par défaut`,high:`Haute`,urgent:`Urgente`},cancel:`Annuler`,save:`Enregistrer`,add:`Ajouter`,nameRequired:`Le nom est requis`,fieldRequired:`{{field}} est requis`,haDataInvalid:`Le champ Data doit être un objet JSON valide, p. ex. {"priority": "high", "ttl": 0}`,phoneNumber:`Numéro de téléphone`,apiKey:`Clé API`,serverUrl:`URL du serveur`,topic:`Sujet`,authToken:`Jeton d'authentification`,userKey:`Clé utilisateur`,appToken:`Jeton d'application`,priority:`Priorité`,pushoverRetry:`Réessai urgence (s)`,pushoverExpire:`Expiration urgence (s)`,botToken:`Jeton du bot`,chatId:`ID du chat`,telegramThreadId:`ID du sujet de forum`,telegramThreadIdHelp:`Facultatif. Envoie dans un seul sujet d'un groupe forum : le dernier nombre du lien du sujet (t.me/c/.../25). Laisser vide pour le sujet General.`,telegramThreadIdInvalid:`L'ID du sujet de forum doit être un nombre.`,smtpServer:`Serveur SMTP`,smtpPort:`Port SMTP`,security:`Sécurité`,authentication:`Authentification`,username:`Nom d'utilisateur`,password:`Mot de passe`,fromEmail:`E-mail expéditeur`,toEmail:`E-mail destinataire`,webhookUrl:`URL du webhook`,payloadFormat:`Format du payload`,authorization:`Autorisation`,titleFieldName:`Nom du champ titre`,messageFieldName:`Nom du champ message`,editTemplate:`Modifier le modèle : {{name}}`,titleLabel:`Titre`,bodyLabel:`Corps`,titlePlaceholder:`Titre de la notification...`,bodyPlaceholder:`Corps de la notification...`,availableVariables:`Variables disponibles`,clickToInsert:`Cliquer pour insérer à la position du curseur dans le corps`,livePreview:`Aperçu en direct`,hide:`Masquer`,show:`Afficher`,loadingPreview:`Chargement de l'aperçu...`,enterTemplateContent:`Saisir le contenu du modèle pour voir l'aperçu`,titlePreview:`Titre :`,bodyPreview:`Corps :`,resetToDefault:`Réinitialiser par défaut`,titleRequired:`Le titre est requis`,bodyRequired:`Le corps est requis`,notificationLog:`Journal des notifications`,showFailedOnly:`Échecs uniquement`,last24Hours:`Dernières 24 heures`,last7Days:`7 derniers jours`,last30Days:`30 derniers jours`,last90Days:`90 derniers jours`,justNow:`À l'instant`,noFailedNotifications:`Aucune notification échouée`,noNotificationsLogged:`Aucune notification enregistrée`,unknownProvider:`Fournisseur inconnu`,logTitle:`Titre`,logMessage:`Message`,logError:`Erreur`,logProvider:`Fournisseur : {{type}}`,logTime:`Heure : {{time}}`,refresh:`Actualiser`,clearOld:`Purger les anciens`,statsSummary:`{{days}} derniers jours :`,statsNotifications:`notifications`,statsSent:`{{count}} envoyées`,statsFailed:`{{count}} échouées`,eventTypes:{print_start:`Impression démarrée`,print_complete:`Impression terminée`,print_failed:`Impression échouée`,print_stopped:`Impression arrêtée`,print_progress:`Progression`,printer_offline:`Imprimante hors ligne`,printer_error:`Erreur de l'imprimante`,filament_low:`Filament bas`,maintenance_due:`Maintenance requise`,test:`Tester`},userEmail:{title:`Notifications`,emailNotifications:`Notifications par e-mail`,emailNotificationsDesc:`Recevez des notifications par e-mail pour vos propres travaux d'impression. Les e-mails sont envoyés via les paramètres SMTP configurés dans l'authentification avancée.`,sendingTo:`Les notifications seront envoyées à`,noEmailWarning:`Votre compte n'a pas d'adresse e-mail. Contactez un administrateur pour en ajouter une.`,printJobNotifications:`Notifications de travaux d'impression`,printJobNotificationsDesc:`Choisissez quels événements déclenchent des notifications par e-mail pour les travaux d'impression que vous soumettez.`,printJobStarts:`Démarrage du travail d'impression`,printJobStartsDesc:`Être notifié quand votre travail d'impression commence.`,printJobFinishes:`Fin du travail d'impression`,printJobFinishesDesc:`Être notifié quand votre travail d'impression se termine avec succès.`,printErrors:`Erreurs d'impression`,printErrorsDesc:`Être notifié quand votre travail d'impression échoue ou rencontre une erreur.`,printJobStops:`Travail d'impression arrêté`,printJobStopsDesc:`Être notifié quand votre travail d'impression est annulé ou arrêté.`,saveSuccess:`Préférences de notification sauvegardées.`,saveError:`Impossible de sauvegarder les préférences de notification.`}},richTextEditor:{bold:`Gras`,italic:`Italique`,underline:`Souligné`,bulletList:`Liste à puces`,numberedList:`Liste numérotée`,alignLeft:`Aligner à gauche`,alignCenter:`Centrer`,alignRight:`Aligner à droite`,addLink:`Ajouter lien`,removeLink:`Retirer lien`},externalLinks:{title:`Liens de la barre latérale`,sidebarLayout:`Barre latérale`,sidebarLayoutDescription:`Affichez ou masquez les pages intégrées, ajoutez des liens externes et faites glisser les éléments pour réorganiser la navigation latérale.`,systemPages:`Pages Bambuddy`,externalLinks:`Liens externes`,visibleInSidebar:`Visible dans la barre latérale`,hiddenFromSidebar:`Masqué dans la barre latérale`,requiredInSidebar:`Obligatoire dans la barre latérale`,hidePage:`Masquer la page`,showPage:`Afficher la page`,settingsCannotBeHidden:`Les paramètres ne peuvent pas être masqués`,noLinksConfigured:`Aucun lien externe configuré`,deleteLink:`Supprimer lien`,removeCustomIcon:`Retirer icône personnalisée`,openInNewTab:`Ouvrir dans un nouvel onglet`,placeholders:{linkName:`Mon Lien`}},keyboardShortcuts:{title:`Raccourcis Clavier`,navigation:`Navigation`,archivesSection:`Archives`,kProfilesSection:`Profils K`,generalSection:`Général`,shortcuts:{goToPrinters:`Aller aux Imprimantes`,goToArchives:`Aller aux Archives`,goToQueue:`Aller à la File`,goToStats:`Aller aux Stats`,goToProfiles:`Aller aux Profils Cloud`,goToSettings:`Aller aux Paramètres`,focusSearch:`Focus recherche`,openUploadModal:`Ouvrir téléversement`,clearSelection:`Tout déselectionner`,contextMenu:`Menu contextuel (cartes)`,refreshProfiles:`Rafraîchir profils`,newProfile:`Nouveau profil`,exitSelectionMode:`Quitter mode sélection`,showHelp:`Afficher cette aide`},footer:`Échap ou clic extérieur pour fermer`},notificationLog:{title:`Journal de Notification`,events:{printStarted:`Début impression`,printComplete:`Fin impression`,printFailed:`Échec impression`,printStopped:`Arrêt impression`,progress:`Progression`,printerOffline:`Hors ligne`,printerError:`Erreur`,lowFilament:`Filament bas`,maintenanceDue:`Maintenance`,test:`Tester`},timeAgo:{justNow:`À l'instant`,minutesAgo:`Il y a {{minutes}}m`,hoursAgo:`Il y a {{hours}}h`}},restoreBackup:{title:`Restaurer Sauvegarde`,restoring:`Restauration...`,restoreComplete:`Restauration terminée`,restoreFailed:`Échec restauration`,importSettings:`Importer les réglages d'un fichier`,pleaseWait:`Patientez pendant la restauration`,clickToSelect:`Fichier .json ou .zip`,howDuplicateHandling:`Gestion des doublons :`,categories:{printers:`Imprimantes`,smartPlugs:`Prises`,notificationProviders:`Fournisseurs`,filaments:`Filaments`,archives:`Archives`,pendingUploads:`Téléversements en attente`,settingsTemplates:`Réglages & Modèles`},matchingInfo:{printers:`par numéro de série`,smartPlugs:`par adresse IP`,notificationProviders:`par nom`,filaments:`par nom+type+marque`,archives:`par empreinte numérique (hash)`,pendingUploads:`par nom de fichier`,settingsTemplates:`toujours écrasés`},replaceExisting:`Remplacer existant`,keepExisting:`Garder existant`,replaceDescription:`Écrase les doublons avec la sauvegarde`,keepDescription:`Ne restaure que les éléments absents`,caution:`Attention :`,cautionText:`L'écrasement remplacera vos réglages. Les codes d'accès imprimantes sont exclus par sécurité.`,itemsRestored:`Éléments restaurés`,itemsSkipped:`Éléments ignorés`,restored:`Restaurés`,skipped:`Ignorés (déjà présents)`,filesLabel:`Fichiers (3MF, vignettes, etc.)`,newApiKeysGenerated:`Nouvelles clés API générées`,newApiKeysWarning:`Copiées maintenant, elles ne seront plus visibles !`,processingBackup:`Traitement du fichier...`,noDataFound:`Aucune donnée trouvée dans le fichier.`,failedToRestore:`Échec restaure. Vérifiez le format.`},backupExport:{title:`Exporter Sauvegarde`,selectData:`Données à inclure`,selectAll:`Tout sélectionner`,selectNone:`Ne rien sélectionner`,categoryDescriptions:{settings:`Langue, thèmes, préférences`,notifications:`ntfy, Pushover, Discord, etc.`,templates:`Modèles de messages personnalisés`,smartPlugs:`Configuration des prises Tasmota`,externalLinks:`Liens externes de la barre latérale`,printers:`Infos imprimantes (codes d'accès exclus par défaut)`,plateDetection:`Images références des plateaux vides`,filaments:`Types et coûts filaments`,maintenance:`Plannings de maintenance personnalisés`,archives:`Données impressions + fichiers (3MF, vignettes, etc.)`,projects:`Projets, BOM, pièces jointes`,pendingUploads:`En attente revue virtuelle`,apiKeys:`Clés Webhook (nouvelles clés générées à l'import)`},requiresPrinters:`Nécessite sélection des imprimantes`,zipFileWarning:`Fichier ZIP créé.`,zipFileDescription:`Contient tous les médias. Peut être volumineux.`,includeAccessCodes:`Inclure Codes d'accès`,includeAccessCodesDescription:`Pour migrer vers une autre machine`,includeAccessCodesWarning:`Codes en texte clair. Sécurisez ce fichier !`,categoriesSelected:`{{selectedCount}} catégories choisies`},pendingUploads:{placeholders:{notes:`Notes sur l'impression...`},discardUpload:`Rejeter`,archiveAllUploads:`Tout archiver`,discardAllUploads:`Tout rejeter`,archive:`Archiver`,timeAgo:{justNow:`À l'instant`,minutesAgo:`Il y a {{minutes}}m`,hoursAgo:`Il y a {{hours}}h`,daysAgo:`Il y a {{days}}j`}},apiBrowser:{placeholders:{requestBody:`Corps JSON...`,searchEndpoints:`Chercher endpoints...`}},configureAmsSlot:{title:`Configurer le slot AMS`,slotConfigured:`Slot configuré !`,configuringSlot:`Configuration du slot :`,slotLabel:`{{ams}} – Emplacement {{slot}}`,searchPresets:`Chercher presets...`,colorPlaceholder:`Nom couleur ou hex (ex: brown, FF8800)`,clearCustomColor:`Effacer couleur perso`,noCloudPresets:`Profils Cloud absents. Connectez-vous.`,noPresetsAvailable:`Aucun preset disponible. Connectez-vous à Bambu Cloud ou importez des profils locaux.`,noMatchingPresets:`Aucun profil trouvé.`,custom:`Perso`,builtin:`Inclus`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Réglages envoyés`,filamentProfile:`Profil Filament`,kProfileLabel:`Profil K (Pressure Advance)`,filteringFor:`Filtrage pour : {{material}}`,noKProfile:`Pas de profil K (utiliser défaut 0.020)`,noMatchingKProfiles:`Aucun profil K trouvé. K=0.020 par défaut sera utilisé.`,otherKProfiles:`Autres profils K sur cette imprimante`,selectFilamentFirst:`Sélectionnez d'abord un profil filament`,kFromCalibration:`K={{value}} de la calibration imprimante`,customColorLabel:`Couleur personnalisée (optionnel)`,presetColors:`Couleurs {{name}} :`,showLessColors:`Moins de couleurs`,showMoreColors:`Plus de couleurs`,clear:`Effacer`,hexLabel:`Hex : #{{hex}}`,resetting:`Réinitialisation...`,resetSlot:`Réinitialiser le slot`,cancel:`Annuler`,configuring:`Configuration...`,configureSlot:`Configurer le slot`},githubBackup:{title:`Sauvegarde Git`,history:`Historique`,downloadBackup:`Télécharger`,restoreBackup:`Restaurer`,noBackupsYet:`Aucune sauvegarde`},emailSettings:{placeholders:{fromName:`Bambuddy`}},tagManagement:{searchTags:`Chercher tags...`,renameTag:`Renommer tag`,deleteTag:`Supprimer tag`},notificationTemplates:{placeholders:{title:`Titre notification...`,body:`Message notification...`}},batchTag:{placeholders:{newTag:`Nouveau tag...`}},photoGallery:{deletePhoto:`Supprimer photo`},filamentHoverCard:{copySpoolUuid:`Copier UUID bobine`},kProfilesView:{hasNote:`A une note`,copyProfile:`Copier profil`},layout:{openMenu:`Ouvrir menu`,noPermissionSystemInfo:`Pas d'autorisation système`},dashboard:{dragToReorder:`Glisser pour réorganiser`,hideWidget:`Masquer widget`},notificationProviderCard:{deleteNotificationProvider:`Supprimer fournisseur`},fileManagerModal:{closeFileManager:`Fermer gestionnaire`,sortFiles:`Trier fichiers`,goToParentFolder:`Dossier parent`,threeView:`Vue 3D`},embeddedCameraViewer:{refreshStream:`Actualiser flux`,close:`Fermer`,zoomOut:`Zoom -`,resetZoom:`Réinitialiser le zoom`,zoomIn:`Zoom +`,dragToResize:`Glisser pour dimension`},timelapseViewer:{skipBack5s:`-5s`,skipForward5s:`+5s`},notificationProviders:{descriptions:{email:`Notifications par email SMTP`,telegram:`Via bot Telegram`,discord:`Via webhook Discord`,ntfy:`Push auto-hébergé (ntfy)`,pushover:`Push fiable (Pushover)`,callmebot:`WhatsApp gratuit via CallMeBot`,webhook:`Requête HTTP POST personnalisée`}},logViewer:{searchPlaceholder:`Message ou nom...`,noLogEntries:`Aucune entrée journal`},switchbarPopover:{noSwitchesInSwitchbar:`Aucun interrupteur`},projectPageModal:{placeholders:{title:`Titre`,designer:`Designer`,license:`Licence`,description:`Description...`,profileTitle:`Titre du profil`,profileDescription:`Description du profil...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`En attente`,justNow:`À l'instant`,now:`Maintenant`,minsAgo:`il y a {{count}}m`,inMins:`dans {{count}}m`,hoursAgo:`il y a {{count}}h`,inHours:`dans {{count}}h`,daysAgo:`il y a {{count}}j`,inDays:`dans {{count}}j`},spoolbuddy:{nav:{dashboard:`Tableau de bord`,ams:`AMS`,inventory:`Inventaire`,writeTag:`Écrire`,settings:`Paramètres`},status:{nfcReady:`NFC prêt`,nfcOff:`NFC désactivé`,offline:`Hors ligne`,online:`En ligne`,noPrinters:`Aucune imprimante`,deviceOffline:`Appareil hors ligne`,waitingConnection:`En attente de connexion...`,systemReady:`Système prêt`,status:`Statut`},dashboard:{readyToScan:`Prêt à scanner`,idleMessage:`Placez une bobine sur la balance pour l'identifier`,nfcHint:`Le tag NFC sera lu automatiquement`,device:`Appareil`,syncWeight:`Sync. poids`,weightSynced:`Synchronisé !`,unknownTag:`Tag inconnu`,newTag:`Nouveau tag détecté`,onScale:`sur la balance`,linkSpool:`Lier à une bobine`,linkTagTitle:`Lier le tag à une bobine`,linkTag:`Lier le tag`,selectSpool:`Sélectionnez une bobine à lier à ce tag :`,noUntagged:`Aucune bobine sans tag trouvée`,tagDetected:`Tag détecté`,noTag:`Pas de tag`,tagId:`Étiquette`,grossWeight:`Poids brut`,spoolSize:`Taille bobine`,close:`Fermer`,currentSpool:`Bobine actuelle`,plateReady:`Plateau prêt : {{name}}`,plateReadyLabel:`Plateaux à libérer`,plateClearAction:`Libérer`,plateClearedToast:`Plateau marqué comme libéré`,plateClearFailed:`Impossible de marquer le plateau comme libéré`},modal:{spoolDetected:`Bobine détectée`,assignToAms:`Assigner à l'AMS`,syncWeight:`Synchroniser le poids`,weightSynced:`Synchronisé !`,syncing:`Synchronisation...`,newTagDetected:`Nouveau tag détecté`,addToInventory:`Ajouter à l'inventaire`,assignToAmsTitle:`Assigner à l'AMS`,selectSlot:`Sélectionner un emplacement`,assign:`Assigner`,assigning:`Attribution...`,assignSuccess:`Assigné !`,assignPendingInsert:`Assigné. Le slot sera configuré lors de l'insertion de la bobine.`,assignError:`Échec de l'attribution de la bobine. Veuillez réessayer.`,noPrinterSelected:`Sélectionner une imprimante...`,noAmsDetected:`Aucun AMS détecté sur cette imprimante`,slot:`Emplacement`},weight:{noReading:`Pas de lecture`,stable:`Stable`,measuring:`Mesure...`,tare:`Tarer`,calibrate:`Calibrer`},spool:{remaining:`Restant`,material:`Matériau`,brand:`Marque`,color:`Couleur`,coreWeight:`Noyau`,labelWeight:`Étiquette`,scaleWeight:`Balance`,netWeight:`Réseau`,lastUsed:`Dernière utilisation`,unknownColor:`Couleur inconnue`},ams:{noData:`Aucun AMS détecté`,connectAms:`Connectez un AMS pour voir les slots`,noPrinter:`Aucune imprimante sélectionnée`,selectPrinter:`Sélectionnez une imprimante dans la barre supérieure`,printerDisconnected:`Imprimante déconnectée`,humidity:`Humidité`,level:`Niveau`,active:`Actif`,slot:`Emplacement`,empty:`Vide`},inventory:{search:`Rechercher des bobines...`,empty:`Aucune bobine dans l'inventaire`,noResults:`Aucune bobine correspondante`,spools:`bobines`,addSpool:`Ajouter une bobine`},settings:{tabDevice:`Appareil`,tabDisplay:`Affichage`,tabScale:`Balance`,tabUpdates:`Mises à jour`,nfcReader:`Lecteur NFC`,type:`Type`,connection:`Connexion`,notConnected:`N/D`,deviceInfo:`Info appareil`,hostname:`Hôte`,uptime:`Temps de fonctionnement`,brightness:`Luminosité`,saved:`Enregistré`,noBacklight:`Aucun rétroéclairage DSI détecté. Le contrôle de luminosité nécessite un écran DSI.`,screenBlank:`Délai d'extinction`,screenBlankDesc:`L'écran s'éteint après inactivité. Touchez pour réveiller.`,displayNote:`La luminosité est appliquée comme filtre logiciel.`,scaleCalibration:`Calibration de la balance`,currentWeight:`Poids actuel`,tareOffset:`Tare`,calFactor:`Facteur`,knownWeight:`Poids connu`,calStep1:`Retirez tout de la balance et appuyez sur Mettre à zéro.`,calStep2:`Placez le poids connu sur la balance.`,setZero:`Mettre à zéro`,calibrateNow:`Calibrer`,calibrated:`Calibré`,tareSet:`Commande de tare envoyée. En attente de l'appareil...`,tareComplete:`Tare terminée !`,tareTimedOut:`Délai de tare dépassé — le daemon SpoolBuddy fonctionne-t-il ?`,tareFailed:`Échec de l'envoi de la commande de tare`,zeroSet:`Point zéro défini. Placez le poids connu sur la balance.`,calibrationDone:`Calibration terminée !`,calibrationFailed:`Échec de la calibration`,lastCalibrated:`Dernière calibration`,stable:`Stable`,settling:`Stabilisation...`,firmware:`Micrologiciel`,scale:`Balance`,noDevice:`Aucun appareil SpoolBuddy trouvé`,daemonVersion:`Version du daemon`,currentVersion:`Actuelle`,versionPending:`En attente du daemon...`,checking:`Vérification...`,checkUpdates:`Vérifier les mises à jour`,updateAvailable:`Mise à jour disponible`,updateInstructions:`Mise à jour via SSH : exécutez le script d'installation SpoolBuddy.`,upToDate:`À jour`,includeBeta:`Inclure les versions bêta`,systemConfig:`Backend & authentification`,backendUrl:`URL du backend Bambuddy`,apiToken:`Jeton d'API`,apiTokenPlaceholder:`Saisir un jeton d'API`,saveConfig:`Enregistrer la configuration`,systemQueued:`Configuration mise en file.`,systemFieldsRequired:`L'URL du backend est obligatoire.`,nfcDiagnostic:`Diagnostic NFC`,scaleDiagnostic:`Diagnostic balance`,readTagDiagnostic:`Diagnostic lecture de tag`,testNfc:`Tester le lecteur`,testScale:`Tester la précision`,testReadTag:`Lire un tag`},writeTag:{tabExisting:`Bobine existante`,tabNew:`Nouvelle bobine`,tabReplace:`Remplacer le tag`,searchPlaceholder:`Rechercher par matériau, couleur, marque...`,noUntaggedSpools:`Aucune bobine sans tag`,noTaggedSpools:`Aucune bobine avec tag`,selectSpool:`Sélectionnez une bobine, puis placez un NTAG sur le lecteur`,placeTag:`Placez un NTAG sur le lecteur`,tagReady:`Tag détecté — prêt à écrire`,writeTag:`Écrire le tag`,replaceTag:`Remplacer le tag`,writing:`Écriture du tag...`,waiting:`En attente de SpoolBuddy...`,writeSuccess:`Tag écrit avec succès !`,writeFailed:`Échec de l'écriture`,queueFailed:`Impossible de mettre en file la commande d'écriture`,tryAgain:`Réessayer`,cancel:`Annuler`,replaceWarning:`L'ancien tag sera dissocié. Le nouveau tag le remplacera.`,deviceOffline:`SpoolBuddy est hors ligne`,material:`Matériau`,colorName:`Nom de la couleur`,color:`Couleur`,brand:`Marque`,weight:`Poids (g)`,createSpool:`Créer la bobine`,creating:`Création...`,spoolCreated:`Bobine créée ! Prêt à écrire.`,createFailed:`Impossible de créer la bobine`,incompleteDataWarning:`Tag écrit avec des données Spoolman incomplètes`},quickMenu:{printerPower:`Alimentation imprimante`,systemControls:`Système`,restartDaemon:`Redémarrer le daemon`,restartBrowser:`Redémarrer le navigateur`,reboot:`Redémarrer`,shutdown:`Éteindre`,swipeToClose:`Glisser vers le bas pour fermer`,confirmTitle:`Confirmer`,confirmShutdown:`Êtes-vous sûr de vouloir éteindre le SpoolBuddy ? Vous aurez besoin d'un accès physique pour le rallumer.`,confirmReboot:`Êtes-vous sûr de vouloir redémarrer le SpoolBuddy ?`,confirmRestartDaemon:`Redémarrer le daemon SpoolBuddy ? Le NFC et la balance seront temporairement indisponibles.`,confirmRestartBrowser:`Redémarrer le navigateur kiosque ? L'écran sera brièvement noir.`,confirm:`Confirmer`,confirmPlugOn:`Allumer {{name}} ?`,confirmPlugOff:`Éteindre {{name}} ?`,turnOn:`Allumer`,turnOff:`Éteindre`}},diagnostic:{modalTitle:`Diagnostic de connexion — {{name}}`,running:`Diagnostic en cours...`,runningElapsed:`Diagnostic en cours... ({{elapsed}}s)`,waitingForReportHint:`En attente que l'imprimante publie un rapport d'état — cela peut prendre jusqu'à {{max}} secondes.`,runFailed:`Le diagnostic n'a pas pu s'exécuter : {{error}}`,retry:`Relancer`,runButton:`Lancer le diagnostic`,sectionTitle:`Diagnostic de connexion`,sectionDescription:`Vérifiez pourquoi une imprimante ne se connecte pas ou n'imprime pas — accessibilité des ports, mode développeur LAN, mode réseau Docker et identifiants.`,noPrinters:`Aucune imprimante configurée.`,overall:{ok:`Aucun problème détecté — la connexion de l'imprimante semble correcte.`,warnings:`L'imprimante devrait fonctionner, mais certains points nécessitent votre attention.`,problems:`Des problèmes expliquant pourquoi l'imprimante ne se connecte pas ou n'imprime pas ont été détectés.`},check:{port_mqtt:{title:`Port de contrôle (MQTT 8883)`,pass:`Accessible — l'imprimante accepte les connexions de contrôle.`,fail:`Le port 8883 est inaccessible. L'imprimante est éteinte, possède une autre adresse IP, ou un pare-feu la bloque. Vérifiez l'IP de l'imprimante et qu'aucun élément ne bloque le port 8883.`},port_ftps:{title:`Port de transfert de fichiers (FTPS 990)`,pass:`Accessible — l'envoi de fichiers d'impression fonctionnera.`,warn:`Le port 990 est inaccessible. La surveillance peut toujours fonctionner, mais l'envoi d'impressions vers l'imprimante échouera. Assurez-vous que le port 990 n'est pas bloqué.`,warn_no_tls:`Le port 990 est ouvert, mais le service de fichiers de l'imprimante ne termine pas la négociation TLS. Les fichiers d'impression, les aperçus et les timelapses ne peuvent pas être récupérés, les archives restent donc vides. Redémarrez l'imprimante — débloquer le port n'y changera rien.`},external_storage:{title:`Stocker les fichiers envoyés sur stockage externe (étape 4 de l'installation)`,pass:`L'imprimante signale que cette option est activée — les fichiers envoyés seront stockés sur la carte SD et les archives auront des miniatures et des métadonnées slicer.`,fail:`L'imprimante signale que cette option est désactivée. Activez « Stocker les fichiers envoyés sur stockage externe » — sur les firmwares récents (P2S 01.02 / Bambu Studio 2.6+) l'interrupteur se trouve dans les Paramètres d'impression de l'imprimante ; sur les versions antérieures, il est dans l'onglet Périphérique de Bambu Studio / OrcaSlicer. Sans cette option, chaque impression archivée est dépourvue de miniature et de métadonnées slicer.`,skip:`Non vérifié — une connexion MQTT active est requise. Sur les slicers plus anciens où ce paramètre n'existe que dans le slicer, l'imprimante ne le signale pas, donc cette vérification passe même si l'option est désactivée — vérifiez l'étape 4 de l'installation manuellement.`,skip_unsupported_model:`Ce modèle a un emplacement SD mais aucun moyen d'activer l'option — le firmware actuel de la série P1 n'affiche pas le bouton dans Bambu Studio et l'imprimante n'a pas d'écran. Il n'y a rien à corriger ici ; les impressions archivées peuvent manquer de miniatures et de métadonnées du slicer jusqu'à ce que Bambu Lab l'ajoute par firmware.`,fail_no_media:`L'option est activée, mais l'imprimante ne signale ni carte ni clé dans son emplacement : les fichiers envoyés n'ont nulle part où aller. Insérez-en une et relancez une impression — d'ici là, chaque impression archivée sera dépourvue de miniature et de métadonnées slicer.`,warn_internal_storage:`L'option est activée et un stockage est présent, mais la dernière impression est tout de même allée dans le stockage interne de l'imprimante, que Bambuddy ne peut pas lire. Sur les séries H2, P2S et X2D, le bouton « Imprimer » de Bambu Studio y envoie toujours, quel que soit ce réglage. Les impressions sont archivées avec leur nom et leurs durées, mais sans miniature ni métadonnées slicer. Pour des archives complètes, lancez les impressions depuis Bambuddy ou tranchez dans OrcaSlicer, ou bien dans Bambu Studio utilisez « Envoyer » avec « Externe » puis lancez l'impression.`,warn_internal_history:`L'option est activée et un stockage est présent, mais la dernière impression est partie d'un fichier déjà présent sur l'imprimante : une réimpression depuis son écran, un lancement depuis Handy ou un fichier envoyé plus tôt. Cette bibliothèque réside dans le stockage interne, que Bambuddy ne peut pas lire, et aucun réglage n'y change rien, puisque rien n'a été envoyé pour cette impression. Elle reste archivée avec son nom et ses durées, mais sans miniature ni métadonnées slicer. Pour des archives complètes, lancez les impressions depuis Bambuddy ou envoyez-les depuis le trancheur.`},port_rtsps:{title:`Port caméra ({{protocol}} {{port}})`,pass:`Accessible — le flux de la caméra fonctionnera.`,warn:`Le port {{port}} est inaccessible. La vue caméra en direct ne fonctionnera pas. Cela n'affecte pas l'impression.`},macos_local_network:{title:`Autorisation « Réseau local » de macOS`,pass:`macOS autorise Bambuddy à accéder au réseau local.`,warn_unsigned:`Le Python qui exécute Bambuddy n’a pas de signature de code : macOS n’a donc rien à quoi rattacher l’autorisation « Réseau local » et rejette silencieusement toutes les connexions vers l’imprimante, sans erreur ni demande. Lancez le script de mise à jour de Bambuddy (install/update_macos.sh), qui le signe, puis redémarrez Bambuddy. Interpréteur : {{executable}}`,warn_permission:`Si l’imprimante est allumée et joignable à cette adresse, ouvrez Réglages Système > Confidentialité et sécurité > Réseau local et vérifiez que le Python de Bambuddy est activé. Sinon macOS rejette les connexions locales en silence, et une mise à jour de Python peut laisser l’ancienne autorisation derrière elle.`},network_mode:{title:`Mode réseau du conteneur`,genericRuntime:`un conteneur`,pass:`Fonctionne dans {{runtime}} en réseau host.`,warn:`Bambuddy fonctionne dans {{runtime}} en réseau bridge. La découverte d'imprimantes et l'imprimante virtuelle nécessitent le mode réseau host — recréez le conteneur en réseau host ("network_mode: host" dans docker-compose, "--network=host" pour Podman).`,skip:`Ne fonctionne pas dans un conteneur — non applicable.`,skip_unknown:`Bambuddy fonctionne dans {{runtime}}, mais son mode réseau n'a pas pu être déterminé. Si la découverte d'imprimantes ou l'imprimante virtuelle ne fonctionnent pas, recréez le conteneur en réseau host.`,skip_system_container:`Bambuddy fonctionne dans un conteneur système {{runtime}}, présent sur le LAN comme une machine virtuelle — non applicable.`},subnet:{title:`Sous-réseau`,pass:`L'imprimante et Bambuddy sont sur le même sous-réseau.`,warn:`L'imprimante ({{printer_ip}}) et Bambuddy ({{host_ip}}) sont sur des sous-réseaux différents. Ils peuvent ne pas se joindre, sauf si un routage entre les sous-réseaux est configuré.`,skip:`Le sous-réseau n'a pas pu être déterminé — ignoré.`},mqtt_auth:{title:`Identifiants de l'imprimante`,pass:`L'imprimante a accepté la connexion.`,fail:`L'imprimante est accessible mais Bambuddy n'y est pas connecté. Le code d'accès ou le numéro de série est très probablement incorrect — le code d'accès change chaque fois que le mode LAN uniquement ou le mode développeur est activé/désactivé, recopiez-le donc depuis l'écran de l'imprimante. Une imprimante en cours de redémarrage, ou ayant déjà atteint sa limite de connexions simultanées, produit le même résultat.`,fail_auth_rejected:`L'imprimante a refusé les identifiants de Bambuddy. Le code d'accès ou le numéro de série est incorrect — le code d'accès change chaque fois que le mode LAN uniquement ou le mode développeur est activé/désactivé. Recopiez-le depuis l'écran de l'imprimante et enregistrez-le dans les paramètres de l'imprimante.`,skip:`Non vérifié — l'imprimante n'a pas pu être jointe.`},developer_mode:{title:`Mode développeur LAN`,pass:`Le mode développeur est activé.`,fail:`Le mode développeur est DÉSACTIVÉ sur l'imprimante. Activez-le dans les paramètres LAN de l'imprimante — et confirmez avec OK. Sans lui, les impressions ne démarreront pas.`,skip:`Impossible à vérifier — nécessite une connexion active à l'imprimante.`},printer_publishing:{title:`L'imprimante publie son état`,pass:`L'imprimante publie des mises à jour d'état — l'AMS, les filaments et les profils K seront correctement reflétés dans le slicer.`,fail:`Le broker MQTT a accepté la connexion mais l'imprimante n'a publié aucun rapport d'état. Il s'agit presque toujours d'un numéro de série erroné ou mal capitalisé — le topic device/<serial>/report est sensible à la casse. Vérifiez le numéro de série dans les paramètres de l'imprimante par rapport à l'écran de la machine.`,skip:`Impossible à vérifier — nécessite une connexion active à l'imprimante.`}}},systemHealth:{sectionTitle:`État du système`,sectionDescription:`Analyse les journaux récents à la recherche de problèmes connus que vous pouvez généralement résoudre vous-même, avant qu'ils ne deviennent un ticket de support.`,rescan:`Relancer l'analyse`,clean:`Aucun problème connu trouvé dans les {{times}} dernières entrées de journal.`,logUnavailable:`La journalisation dans un fichier est désactivée, les journaux ne peuvent donc pas être analysés. Activez la journalisation dans un fichier pour utiliser cette vérification.`,learnMore:`Comment corriger`,fixLabel:`Correctif :`,occurrences:`Vu {{times}}× — dernière fois à {{lastSeen}}`,category:{layer8:`Vous pouvez corriger ceci`,environment:`Environnement`,bug:`Merci de le signaler`},signature:{"ftp-auth-rejected":{name:`L'imprimante a refusé le code d'accès`,cause:`L'imprimante a refusé la connexion de transfert de fichiers. Le code d'accès est incorrect, ou il a changé après l'activation du mode développeur.`,fix:`Recopiez le code d'accès depuis l'écran de l'imprimante (paramètres LAN) et mettez-le à jour dans les paramètres de l'imprimante dans Bambuddy.`},"ftp-connection-timeout":{name:`Délai de connexion de transfert de fichiers dépassé`,cause:`Bambuddy n'a pas pu atteindre le port de transfert de fichiers de l'imprimante (FTPS 990). Le port est bloqué, ou l'imprimante est éteinte ou sur un autre sous-réseau.`,fix:`Assurez-vous que rien ne bloque le port 990 entre Bambuddy et l'imprimante, et que les deux sont sur le même réseau.`},"ftp-ssl-error":{name:`Échec de la négociation sécurisée du transfert de fichiers`,cause:`Le service de fichiers de l'imprimante a répondu sur le port 990 sans TLS. Son serveur de fichiers est bloqué : c'est une panne côté imprimante, pas un problème de pare-feu ou de micrologiciel.`,fix:`Redémarrez l'imprimante. D'ici là, les fichiers d'impression, les vignettes et les timelapses ne peuvent pas être récupérés ; l'impression elle-même n'est pas affectée.`},"bambu-cloud-captcha":{name:`Bambu Cloud demande un CAPTCHA`,cause:`La protection anti-abus de Bambu contrôle ce réseau, aucune connexion à Bambu Cloud ne peut donc aboutir. Cela dépend de l'adresse IP publique, pas de votre compte ni de cette installation.`,fix:`Patientez : cela disparaît généralement en quelques heures, et les tentatives répétées le prolongent. En attendant, connectez-vous avec un jeton d'accès issu d'une session de navigateur.`},"mqtt-connection-flapping":{name:`La connexion à l'imprimante se coupe sans cesse`,cause:`La connexion de contrôle (MQTT 8883) se déconnecte et se reconnecte à répétition — généralement à cause d'un réseau faible ou d'un port partiellement bloqué.`,fix:`Vérifiez le signal Wi-Fi près de l'imprimante, privilégiez une connexion filaire et assurez-vous que le port 8883 est accessible de façon fiable.`},"camera-connection-refused":{name:`Flux de la caméra inaccessible`,cause:`La caméra en direct n'a pas pu être atteinte sur le port RTSPS 322. Le port est bloqué, ou la caméra ou la vue en direct par LAN est désactivée sur l'imprimante.`,fix:`Activez la caméra et la vue en direct par LAN sur l'imprimante, et assurez-vous que le port 322 n'est pas bloqué. Cela n'affecte pas l'impression.`},"database-locked":{name:`Conflits d'écriture dans la base de données`,cause:`La base de données SQLite rencontre des erreurs "database is locked" sous charge — fréquent lorsque plusieurs imprimantes sont utilisées en même temps.`,fix:`Faites passer Bambuddy à une base de données PostgreSQL externe. Consultez le guide PostgreSQL dans la documentation.`}}},vpDiagnostic:{title:`Vérification de configuration — {{name}}`,runButton:`Lancer la vérification`,running:`Vérification de configuration en cours...`,runFailed:`Impossible de lancer la vérification de configuration : {{error}}`,retry:`Relancer`,overall:{ok:`Toutes les vérifications ont réussi — cette imprimante virtuelle est correctement configurée.`,warnings:`L'imprimante virtuelle devrait fonctionner, mais certains points nécessitent votre attention.`,problems:`Des problèmes ont été trouvés qui expliquent pourquoi le slicer ne voit pas ou ne peut pas utiliser cette imprimante virtuelle.`},check:{enabled:{title:`Imprimante virtuelle activée`,fail:`Cette imprimante virtuelle est désactivée. Activez-la pour qu'elle soit détectable.`},running:{title:`Services en cours d'exécution`,fail:`L'imprimante virtuelle est activée mais ses services ne sont pas en cours d'exécution. Consultez le journal Bambuddy — un conflit d'IP de liaison ou une erreur de permission les arrête généralement.`},bind_interface:{title:`Interface réseau de liaison`,fail:`L'interface de liaison n'est pas définie ou n'existe plus sur cet hôte. Choisissez une interface actuelle dans la liste "Interface de liaison".`},access_code:{title:`Code d'accès défini`,fail:`Aucun code d'accès n'est défini. Le slicer doit recevoir le même code d'accès à 8 caractères que celui que vous définissez ici.`},target_printer:{title:`Imprimante cible`,fail:`Aucune imprimante cible n'est sélectionnée. Le mode proxy a besoin d'une vraie imprimante vers laquelle transférer.`,warn:`L'imprimante cible est hors ligne pour le moment — le transfert reprendra dès qu'elle se reconnectera.`},port_ftps:{title:`Service de téléversement de fichiers (port {{port}})`,fail:`Rien n'écoute sur le port {{port}} de l'IP de liaison, le slicer ne peut donc pas téléverser de fichiers. La cause habituelle est un conflit de port sur cette interface.`},port_mqtt:{title:`Service de contrôle (port {{port}})`,fail:`Rien n'écoute sur le port {{port}} de l'IP de liaison, le slicer ne peut donc pas se connecter ni afficher l'état.`},port_bind:{title:`Service de détection (port {{port}})`,fail:`Rien n'écoute sur le port {{port}} de l'IP de liaison, la poignée de main de détection du slicer échoue donc.`},privileged_ports:{title:`Liaison aux ports privilégiés`,fail:`Le port {{port}} est inférieur à 1024 et ce service n'est pas autorisé à s'y lier — c'est pourquoi rien n'écoute ci-dessus. Ajoutez AmbientCapabilities=CAP_NET_BIND_SERVICE dans /etc/systemd/system/bambuddy.service puis redémarrez, ou exécutez "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))". Sous Docker, ajoutez cap_add: [NET_BIND_SERVICE].`},certificate:{title:`Certificat TLS`,pass:`Certificat prêt. Assurez-vous que le certificat CA Bambuddy (ci-dessus) est importé dans le magasin de confiance de votre slicer.`,fail:`Le certificat TLS de cette imprimante virtuelle est manquant. Vérifiez que le répertoire de données Bambuddy est accessible en écriture.`}}},bugReport:{logHealthSummary:`Problèmes connus trouvés dans vos journaux`,logHealthIntro:`Les journaux récents correspondent à des problèmes connus. Consultez les correctifs ci-dessous — les résoudre pourrait régler votre problème sans rapport de bogue. Vous pouvez tout de même envoyer un rapport ci-dessous.`,title:`Signaler un bug`,description:`Description`,descriptionPlaceholder:`Qu'est-ce qui n'a pas fonctionné ? Veuillez décrire le problème...`,email:`E-mail (optionnel)`,emailPlaceholder:`votre@email.fr`,emailPrivacy:`Si fourni, votre e-mail sera inclus dans une section repliée de l'issue GitHub pour que le mainteneur puisse vous contacter.`,screenshot:`Capture d'écran`,uploadOrPaste:`Télécharger, coller ou glisser une image`,dataCollectedSummary:`Quelles données sont incluses dans le rapport ?`,dataIncluded:`Inclus :`,dataIncludedList:`Version de l'app, OS, architecture, version Python, statistiques de base de données (compteurs uniquement), modèles d'imprimantes, nombre de buses, versions firmware, état de connexion, état des intégrations (Spoolman, MQTT, HA), paramètres non sensibles, nombre d'interfaces réseau, détails Docker, versions des dépendances.`,dataNeverIncluded:`Jamais inclus :`,dataNeverIncludedList:`Noms d'imprimantes, numéros de série, codes d'accès, mots de passe, adresses IP, adresses e-mail, clés API, tokens, URLs de webhook, noms d'hôtes ou noms d'utilisateurs.`,submit:`Envoyer`,startLogging:`Lancer la journalisation`,stepEnableLogging:`Journalisation activée`,stepReproduce:`Reproduisez le problème`,stepStopLogging:`Arrêter & envoyer`,stopAndSubmit:`Arrêter & Envoyer`,maxDuration:`Arrêt auto après {{minutes}} min`,stoppingLogs:`Collecte des journaux & envoi...`,submitting:`Envoi du rapport de bug...`,submittingStepConnection:`Vérification de la connectivité des imprimantes`,submittingStepVirtualPrinters:`Vérification de la configuration des imprimantes virtuelles`,submittingStepLogScan:`Analyse des journaux récents pour les problèmes connus`,submittingStepSubmit:`Envoi du rapport vers GitHub`,submitSuccess:`Rapport de bug envoyé avec succès !`,submitFailed:`Échec de l'envoi du rapport de bug`,diagnosticChecking:`Vérification des connexions des imprimantes...`,diagnosticHealthy:`Vérification de connexion réussie — aucun problème détecté sur vos imprimantes.`,diagnosticSummary:`{{problems}} imprimante(s) sur {{total}} ont des problèmes de connexion`,diagnosticIntro:`Une ou plusieurs imprimantes ont un problème de connexion qui pourrait être à l'origine de votre problème. Dépliez une imprimante ci-dessous pour voir la solution — la résoudre pourrait régler le problème sans rapport de bug. Vous pouvez tout de même envoyer un rapport ci-dessous.`,thankYou:`Merci !`,submitted:`Votre rapport de bug a été soumis.`,viewIssue:`Voir l'issue`,closeKeepsRecording:`Vous pouvez fermer ce panneau pendant que vous reproduisez le problème : l'enregistrement continue et sa réouverture vous ramènera ici.`,resumeRecording:`Rapport de bogue en cours d'enregistrement — {{elapsed}}. Cliquez pour terminer.`,resumeReport:`Reprendre le rapport`,unexpectedError:`Une erreur inattendue est survenue`},failureDetection:{title:`Détection d'échec par IA`,description:`Surveille les impressions via une API ML Obico auto-hébergée et agit automatiquement sur les échecs détectés.`,mlUrl:`URL de l'API ML Obico`,mlUrlHint:`URL de base de votre conteneur Obico ml_api auto-hébergé (ex. http://192.168.1.10:3333).`,mlToken:`Jeton de l'API ML (facultatif)`,mlTokenPlaceholder:`Laissez vide si le serveur fonctionne sans ML_API_TOKEN`,mlTokenHint:`Doit correspondre à la variable d'environnement ML_API_TOKEN de votre conteneur Obico ml_api. Laissez vide si le conteneur fonctionne sans jeton.`,test:`Tester`,testSuccess:`API ML accessible et fonctionnelle.`,testSuccessTokenUnknown:`API ML accessible et fonctionnelle. Le jeton n'a pas pu être vérifié.`,testFailed:`Impossible d'atteindre l'API ML.`,sensitivity:`Sensibilité`,sensitivityLow:`Basse (moins de faux positifs)`,sensitivityMedium:`Moyenne (équilibrée)`,sensitivityHigh:`Haute (détection précoce, plus de faux positifs)`,sensitivityHint:`Ajuste les seuils de confiance qui déclenchent les avertissements et les échecs.`,action:`Action sur échec détecté`,actionNotify:`Notifier uniquement`,actionPause:`Mettre en pause`,actionPauseOff:`Pause et couper l'alimentation`,pollInterval:`Intervalle de vérification (secondes)`,pollIntervalHint:`Fréquence de vérification de chaque imprimante pendant l'impression. Minimum 5s, maximum 120s.`,externalUrlMissing:`L'URL externe n'est pas définie.`,externalUrlHint:`L'API ML récupère la capture caméra par URL. Définissez l'URL externe dans les paramètres généraux pour que le conteneur API ML puisse atteindre Bambuddy.`,perPrinterTitle:`Imprimantes surveillées`,perPrinterHint:`Choisissez quelles imprimantes le service de détection surveille.`,monitorAll:`Surveiller toutes les imprimantes connectées`,statusTitle:`Statut`,serviceRunning:`Service en cours d'exécution`,thresholds:`Seuils bas / haut`,activePrinters:`Impressions actives`,noActivePrints:`Aucune impression en cours.`,historyTitle:`Détections récentes`,noHistory:`Aucune détection pour le moment.`},makerworld:{title:`MakerWorld`,description:`Collez une URL de modèle MakerWorld pour l'importer et l'imprimer directement depuis Bambuddy — sans passer par l'application Bambu Handy.`,pasteUrlHeader:`Importer depuis MakerWorld`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… ou collez n'importe quel lien MakerWorld`,resolveButton:`Résoudre`,signInRequiredTitle:`Connexion Bambu Cloud requise pour télécharger`,signInRequiredBody:`Vous pouvez consulter les détails du modèle anonymement, mais MakerWorld nécessite un compte Bambu Cloud pour télécharger les fichiers 3MF.`,signInExpiredTitle:`Session Bambu Cloud expirée`,signInExpiredBody:`Vous êtes toujours connecté à Bambuddy, mais Bambu Lab n'accepte plus le jeton enregistré : les téléchargements échoueront. Reconnectez-vous à Bambu Cloud.`,openCloudSettings:`Ouvrir les paramètres Cloud`,untitledModel:`Modèle sans titre`,byCreator:`par {{name}}`,downloadsCount:`{{count}} téléchargements`,licensePrefix:`Licence`,alreadyImported:`Déjà dans la bibliothèque`,openOnMakerworld:`Ouvrir sur MakerWorld`,alreadyInLibrary:`Ce modèle est déjà dans votre bibliothèque — retrouvez-le dans Gestionnaire de fichiers → MakerWorld`,importSuccess:`{{filename}} importé — enregistré dans Gestionnaire de fichiers → MakerWorld`,platesHeader:`Plateaux ({{count}})`,plateDefaultName:`Plateau {{n}}`,materialCount:`{{count}} filaments`,amsRequired:`AMS requis`,slicedFor:`Découpé pour {{printer}}`,alsoCompatible:`Également marqué compatible : {{printers}}`,importToLibrary:`Enregistrer`,sliceIn:`Enregistrer et découper dans {{slicer}}`,disclaimer:`L'intégration MakerWorld utilise des points de terminaison API documentés par la communauté. Bambuddy n'est ni affilié ni approuvé par MakerWorld ou Bambu Lab.`,lastImportSuccess:`Importé dans votre bibliothèque`,lastImportAlreadyInLibrary:`Déjà dans votre bibliothèque`,viewInLibrary:`Voir dans le Gestionnaire de fichiers`,openInBambuStudio:`Ouvrir dans Bambu Studio`,openInOrcaSlicer:`Ouvrir dans OrcaSlicer`,importTo:`Importer dans le Gestionnaire de fichiers`,recentImportsHeader:`Imports récents`,phaseResolving:`Résolution`,phaseDownloading:`Téléchargement`,folderAuto:`MakerWorld (par défaut)`,importAll:`Tout importer`,importAllProgress:`Importation de {{current}}/{{total}}`,openGallery:`Ouvrir la galerie d'images`,galleryPrev:`Image précédente`,galleryNext:`Image suivante`,deleteImport:`Retirer de la bibliothèque`,importDeleting:`Suppression…`,importDeleted:`Retiré de la bibliothèque`,confirmDelete:`Retirer {{filename}} de la bibliothèque ? Le fichier local est supprimé, mais la plaque peut être ré-importée depuis MakerWorld.`,errors:{resolveFailed:`Impossible de résoudre cette URL MakerWorld.`,downloadFailed:`Le téléchargement a échoué. Veuillez réessayer.`,deleteFailed:`Impossible de retirer le fichier de la bibliothèque.`}},gcodeViewer:{filamentSlot:`Filament {{n}}`,loading:`Lecture de la trajectoire…`,loadFailed:`Impossible de charger le G-code de ce fichier.`,showTravel:`Déplacements à vide`,topLayer:`Couche supérieure`,bottomLayer:`Couche inférieure`,noSource:`Aucun fichier à prévisualiser n’a été indiqué.`,view:{filament:`Filament`,feature:`Élément`,height:`Hauteur`,width:`Largeur`},feature:{wall:`Parois`,sparseInfill:`Remplissage clairsemé`,solidInfill:`Remplissage plein`,bridge:`Pont / surplomb`,support:`Support`,skirt:`Jupe / bordure`,gapFill:`Remplissage des vides`,ironing:`Lissage`,primeTower:`Tour de purge`},back:`Retour`,backToArchives:`Retour aux archives d'impression`,backToFiles:`Retour au gestionnaire de fichiers`,plates:`Plateaux`,plateN:`Plaque {{n}}`},libraryTrash:{title:`Corbeille`,headerButton:`Corbeille`,headerTooltip:`Voir les fichiers déplacés dans la corbeille`,backToFiles:`Retour au gestionnaire de fichiers`,subtitleAdmin:`Les fichiers supprimés restent ici pendant {{days}} jours, puis sont supprimés automatiquement. Cette vue affiche la corbeille de tous les utilisateurs.`,subtitleUser:`Les fichiers supprimés restent ici pendant {{days}} jours, puis sont supprimés automatiquement.`,loading:`Chargement de la corbeille…`,loadError:`Impossible de charger la corbeille.`,empty:`La corbeille est vide.`,summary:`{{count}} fichiers · {{size}}`,emptyTrash:`Vider la corbeille`,restore:`Restaurer`,purgeNow:`Supprimer maintenant`,autoPurgeIn:`Suppression automatique dans {{when}}`,days:`jours`,retentionLabel:`Supprimer automatiquement après`,selectAll:`Tout sélectionner`,selectOne:`Sélectionner {{filename}}`,selectionCount:`{{count}} sélectionné(s)`,bulkRestore:`Restaurer la sélection`,bulkPurge:`Supprimer la sélection`,col:{filename:`Fichier`,folder:`Dossier`,size:`Taille`,deleted:`Mis à la corbeille`,autoPurge:`Suppression auto.`,owner:`Propriétaire`,actions:`Actions`},confirm:{purgeTitle:`Supprimer définitivement ?`,purgeBody:`{{filename}} sera supprimé du disque et ne pourra pas être restauré.`,emptyTitle:`Vider la corbeille ?`,emptyBody:`Tous les {{count}} fichiers seront supprimés du disque. Cette action est irréversible.`,bulkPurgeTitle:`Supprimer définitivement les fichiers sélectionnés ?`,bulkPurgeBody:`Les {{count}} fichiers sélectionnés seront supprimés du disque et ne pourront pas être restaurés.`,cta:`Supprimer définitivement`},toast:{restored:`Fichier restauré.`,restoreFailed:`Impossible de restaurer le fichier.`,purged:`Fichier supprimé définitivement.`,purgeFailed:`Impossible de supprimer le fichier.`,emptied:`{{count}} fichier(s) supprimé(s) de la corbeille.`,emptyFailed:`Impossible de vider la corbeille.`,retentionSaved:`Suppression automatique réglée sur {{days}} jours.`,retentionFailed:`Impossible d'enregistrer le réglage de rétention.`,bulkRestored:`{{count}} fichier(s) restauré(s).`,bulkPurged:`{{count}} fichier(s) supprimé(s).`}},libraryPurge:{title:`Purger les anciens fichiers`,headerButton:`Purger`,headerTooltip:`Déplacer en masse les anciens fichiers vers la corbeille`,description:`Les fichiers plus anciens que le seuil seront déplacés vers la corbeille. Les dossiers externes sont ignorés. Vous pouvez restaurer depuis la corbeille avant la suppression automatique.`,ageLabel:`Déplacer les fichiers plus anciens que`,days:`jours`,includeNeverPrinted:`Inclure les fichiers jamais imprimés`,effectsTitle:`Ce qui se passe lorsque vous cliquez sur Purger`,effect1:`Les fichiers correspondants sont déplacés vers la corbeille — pas encore supprimés du disque.`,effect2:`Vous pouvez les restaurer depuis la corbeille jusqu'à l'expiration de la fenêtre de rétention.`,effect3:`Après la période de rétention, le balayeur de corbeille les supprime définitivement.`,effect4:`Les fichiers dans les dossiers externes (liés) sont ignorés — Bambuddy ne supprime jamais d'octets qu'il ne possède pas.`,previewLoading:`Vérification du nombre de fichiers concernés…`,previewFailed:`Impossible de prévisualiser la purge.`,previewSummary:`{{count}} fichiers · {{size}} seraient déplacés vers la corbeille`,andMore:`…et {{count}} de plus`,warning:`Les fichiers sont supprimés en douceur — vous pouvez les restaurer depuis la corbeille jusqu'à l'expiration de la période de rétention.`,confirmCta:`Déplacer {{count}} vers la corbeille`,purging:`Déplacement vers la corbeille…`,toast:{success:`{{count}} fichier(s) déplacé(s) vers la corbeille.`,failed:`Impossible de purger les fichiers.`}},libraryAutoPurge:{enableLabel:`Purge automatique des anciens fichiers`,enableDescription:`Exécute la purge administrateur une fois par jour. Les fichiers sont d'abord déplacés vers la corbeille — ils ne sont pas supprimés immédiatement.`,ageLabel:`Purger automatiquement les fichiers plus anciens que`,ageDescription:`Minimum 7 jours, maximum 10 ans. Utilise la même règle d'ancienneté que le bouton Purger manuel.`,days:`jours`,includeNeverPrinted:`Inclure les fichiers jamais imprimés`,saveFailed:`Impossible d'enregistrer les paramètres de purge automatique.`},archivePurge:{headerButton:`Purger les anciens`,headerTooltip:`Suppression groupée d'anciennes archives`,title:`Purger les anciennes archives`,description:`Effacer l'ancien historique d'impression. Chaque archive vieillit selon sa dernière impression terminée — réimprimer une archive remet son âge à zéro, donc le travail actif n'est jamais purgé.`,ageLabel:`Supprimer les archives non imprimées depuis`,days:`jours`,effectsTitle:`Ce qui se passe lorsque vous cliquez sur Purger`,effect1:`Chaque archive correspondante est masquée des listes et ses fichiers sont retirés du disque (3MF, miniature, timelapse, 3MF source, F3D, photos).`,effect2:`La ligne d'archive reste en base pour que les statistiques rapides conservent la contribution en filament, temps, coût et énergie — même comportement que la suppression individuelle par défaut.`,effect3:`Cochez « Aussi retirer des statistiques » ci-dessous pour également supprimer la contribution des statistiques rapides (équivalent à l'option de la suppression individuelle). Ce chemin est irréversible.`,effect4:`Réimprimer une archive remet son compteur à zéro, les archives actives sont donc protégées.`,purgeStatsLabel:`Aussi retirer des statistiques`,purgeStatsHint:`Supprime les archives correspondantes des statistiques rapides (filament, temps, coût, énergie). Sans cette option, les statistiques conservent chaque contribution et seuls les fichiers quittent le disque.`,previewLoading:`Vérification du nombre d'archives correspondantes…`,previewFailed:`Impossible de prévisualiser la purge.`,previewSummary:`{{count}} archives · {{size}} seraient retirées`,andMore:`…et {{count}} de plus`,warning:`Les fichiers sont retirés du disque et ne peuvent pas être restaurés. Téléchargez ou marquez comme favori avant de continuer.`,confirmCta:`Retirer {{count}} archive(s)`,purging:`Retrait en cours…`,toast:{success:`{{count}} archive(s) retirée(s).`,failed:`Impossible de purger les archives.`}},archiveAutoPurge:{enableLabel:`Purger auto. les anciennes archives`,enableDescription:`Une fois par jour, masque des listes les archives non imprimées dans le seuil et retire leurs fichiers du disque. Réimprimer remet le compteur à zéro.`,ageLabel:`Suppression auto. des archives non imprimées depuis`,ageDescription:`Minimum 7 jours, maximum 10 ans. Basé sur la dernière impression terminée — réimprimer remet l'âge à zéro. Retire 3MF, miniature, timelapse, 3MF source, F3D et photos.`,days:`jours`,purgeStatsLabel:`Aussi retirer des statistiques`,purgeStatsDescription:`Lorsqu'activé, le nettoyage quotidien supprime aussi la contribution de chaque archive purgée des statistiques rapides (filament, temps, coût, énergie). Désactivé par défaut — les statistiques conservent la contribution et seuls les fichiers quittent le disque.`,runNow:`Purger les archives maintenant`,saveFailed:`Impossible d'enregistrer les paramètres de purge automatique.`},cameraTokens:{scope:{camera_stream:`Flux de caméra`,camwall:`Mur de caméras`,overlay:`Incrustation de streaming`},title:`Jetons API caméra`,navTitle:`Jetons API caméra`,description:`Jetons de longue durée pour intégrer le flux de caméra dans Home Assistant, Frigate, des écrans en mode kiosque ou tout autre outil nécessitant une adresse stable. La portée se choisit à la création ; un jeton peut être révoqué à tout moment.`,loading:`Chargement…`,confirmRevoke:{title:`Révoquer ce jeton ?`,body:`Tout appareil utilisant "{{name}}" perdra l'accès immédiatement. Action irréversible.`,cancel:`Annuler`,confirm:`Révoquer`},create:{scopeLabel:`Portée`,hintCameraStream:`Un jeton de flux de caméra ne peut récupérer que des flux et des instantanés. À utiliser pour Home Assistant, Frigate ou tout ce qui intègre une seule caméra.`,hintCamWall:`Un jeton Mur de caméras ouvre /camwall sur un écran sans connexion. Il voit le nom et l'état de chaque imprimante, ainsi que leurs flux de caméra. Il ne voit ni les noms de fichiers, ni les adresses, ni les codes d'accès.`,hintOverlay:`Un jeton Incrustation de streaming ouvre /overlay/{printerId} sur un écran sans connexion — pour OBS ou tout autre flux en direct. Il voit le flux de caméra d'une imprimante ainsi que son état d'impression en direct, y compris le nom de fichier affiché à l'écran. Il ne voit ni les adresses ni les codes d'accès.`,title:`Créer un nouveau jeton`,nameLabel:`Nom du jeton`,namePlaceholder:`par ex. Home Assistant`,daysLabel:`Jours avant expiration`,submit:`Créer`,hint:`Durée de vie maximale 365 jours. La valeur du jeton n'est affichée qu'une seule fois — copiez-la maintenant.`},created:{camWallUrlTitle:`Adresse du mur de caméras pour cet écran`,camWallUrlHint:`Ouvrez cette adresse sur l'écran. Quiconque peut lire l'adresse peut regarder le mur : traitez-la comme une clé. Révoquez le jeton pour couper l'écran.`,overlayUrlTitle:`Adresse d'incrustation pour OBS`,overlayUrlHint:`Ajoutez ceci comme Source navigateur dans OBS. Remplacez le numéro dans /overlay/1 par le numéro de votre imprimante (indiqué dans son adresse sur la page Imprimantes). Quiconque peut lire l'adresse peut regarder le flux : traitez-la comme une clé et révoquez le jeton pour couper l'accès.`,title:`Jeton créé – copiez-le maintenant`,warning:`C'est la seule fois où ce jeton sera visible. Après la fermeture de ce dialogue, vous ne pourrez plus jamais le voir.`,copy:`Copier`,dismiss:`Je l'ai enregistré`},list:{scope:`Portée`,myTitle:`Mes jetons`,allTitle:`Tous les utilisateurs (vue admin)`,empty:`Aucun jeton pour le moment.`,name:`Nom`,owner:`Propriétaire`,prefix:`Préfixe`,created:`Créé`,expires:`Expire`,lastUsed:`Dernière utilisation`,revoke:`Révoquer`,expired:`Expiré`},toast:{created:`Jeton créé`,createFailed:`Échec de la création du jeton`,revoked:`Jeton révoqué`,revokeFailed:`Échec de la révocation du jeton`,loadFailed:`Échec du chargement des jetons`,copied:`Copié dans le presse-papiers`,copyFailed:`Échec de la copie – sélectionnez et copiez manuellement`}},forecast:{title:`Prévision des stocks`,noSpools:`Aucune bobine active trouvée. Ajoutez des bobines à votre inventaire pour voir les données de prévision.`,noUsageData:`Aucune donnée d'utilisation disponible — impossible de projeter la chronologie des stocks.`,sku:`SKU`,material:`Matériau`,stock:`Stock`,dailyRate:`Cadence`,daysLeft:`Jours restants`,emptyBy:`Épuisé le`,reorderBy:`Réapprovisionner avant le`,actions:`Actions`,trend:`Tendance`,estimated:`Est.`,noData:`Aucune donnée`,timeframe:`Période`,chartTitle:`Prévision du stock — Top 5 matériaux`,dashedLinesROP:`Lignes pointillées = points de réapprovisionnement`,stockLevel:`Niveau de stock`,reorderPoint:`Point de réapprovisionnement`,safetyMargin:`Marge de sécurité`,trendLegend:`Tendance (basée sur l'historique, niveau de service 95 %)`,estimatedLegend:`Estimée (delta de poids)`,noDataLegend:`Aucune donnée`,ropLabel:`PR`,ssLabel:`SS`,safetyStockLegend:`Stock de sécurité`,stockArrivalLegend:`Arrivée du stock`,stockoutLegend:`Rupture de stock`,alertCount_one:`{{count}} alerte`,alertCount_other:`{{count}} alertes`,order:`Commander`,globalLeadTime:`Délai global`,globalLeadTimeHint:`Délai global minimum — utilisé dans le calcul du point de réapprovisionnement pour tous les SKUs`,save:`Enregistrer`,cancel:`Annuler`,settingsSaved:`Paramètres enregistrés`,failedSaveSettings:`Échec de l'enregistrement des paramètres`,globalLeadTimeSaved:`Délai global enregistré`,skuLeadTimeOverride:`Délai spécifique au SKU`,skuLeadTimeHint:`0 = utiliser le délai global. Définir >0 pour remplacer ce SKU.`,safetyMarginLabel:`Marge de sécurité`,effectiveLeadTime:`Délai effectif`,effectiveLeadTimeHint:`max(global {{global}}j, SKU {{sku}}j)`,reorderPointHint:`d̄ × LT + safety margin — commander quand le stock atteint ce niveau`,safetyMarginHint:`Stock de sécurité statistique (z=1,65 × σ × √LT) + tampon défini par l'utilisateur`,safetyMarginHintDays:`Tampon ajouté par-dessus le stock de sécurité statistique.{{approx}}`,safetyMarginHintDaysApprox:` ≈ {{g}}g au taux actuel.`,safetyMarginHintG:`Tampon de poids fixe ajouté par-dessus le stock de sécurité statistique.{{approx}}`,safetyMarginHintGApprox:` ≈ {{days}}j au taux actuel.`,individualSpools:`Bobines individuelles`,labelWeight:`Étiquette`,spoolCount_one:`{{count}} bobine`,spoolCount_other:`{{count}} bobines`,stockBreakRisk:`Risque de rupture de stock`,stockBreakBefore:`Rupture de stock avant réapprovisionnement`,stockBreakDetail:`{{days}}j restants, délai {{lt}}j.`,reorderNow:`Réapprovisionner maintenant`,reorderTriggerPassed:`La date de déclenchement {{date}} est passée.`,shoppingList:`Liste d'achats`,shoppingListItems_one:`({{count}} article)`,shoppingListItems_other:`({{count}} articles)`,shoppingListEmpty:`La liste d'achats est vide. Cliquez sur l'icône panier d'une ligne pour ajouter des articles.`,addToCart:`Ajouter à la liste d'achats`,alertsSnoozed:`Désactiver les alertes pour ce SKU`,alertsEnabled:`Activer les alertes pour ce SKU`,addedToCart:`Ajouté à la liste de courses`,failedAddItem:`Impossible d'ajouter l'article`,listView:`Liste`,logisticsView:`Logistique`,qty:`Qté`,weight:`Poids`,leadTime:`Délai`,expectedRestock:`Réapprovisionnement prévu`,status:`Statut`,note:`Note`,pending:`En attente`,purchased:`Commandé`,received:`Reçu`,markPurchased:`Marquer comme commandé`,markReceived:`Marquer comme reçu — ajoute les bobines au stock`,resetToPending:`Remettre en attente`,remove:`Supprimer`,clearAll:`Tout effacer`,downloadCsv:`CSV`,addToCartTitle:`Ajouter à la liste de courses`,byQuantity:`Par quantité`,byDuration:`Par durée`,numberOfSpools:`Nombre de bobines`,lastHowManyDays:`Combien de jours doit-il durer ?`,noUsageQty:`Pas de données d'utilisation — quantité définie à 1.`,noteOptional:`Note (optionnel)`,notePlaceholder:`ex. pour le projet X, urgent…`,addNSpools_one:`Ajouter {{count}} bobine`,addNSpools_other:`Ajouter {{count}} bobines`,onArrival:`À la livraison`,stockBreakIn:`Rupture de stock dans {{days}}j.`,stockRunsOutBefore:`Le stock s'épuise avant la fin du délai de {{lt}}j.`,atRate:`À {{rate}}g/jour, vous avez besoin de`,moreSpools_one:`{{count}} bobine supplémentaire`,moreSpools_other:`{{count}} bobines supplémentaires`,bridgeGap:`pour combler l'écart.`,noReadAccess:`Vous n'avez pas la permission de consulter les prévisions de stock.`,noWriteAccess:`Vous n'avez pas la permission de modifier les paramètres de prévision.`}}},ja:{translation:{nav:{printers:`プリンター`,archives:`アーカイブ`,queue:`印刷キュー`,stats:`統計`,profiles:`プロファイル`,maintenance:`メンテナンス`,projects:`プロジェクト`,inventory:`フィラメント`,finance:`ファイナンス`,files:`ファイル管理`,makerworld:`MakerWorld`,notifications:`通知`,settings:`設定`,system:`システム`,collapseSidebar:`サイドバーを閉じる`,expandSidebar:`サイドバーを開く`,update:`アップデート`,updateAvailable:`アップデートあり: v{{version}}`,updateAvailableBanner:`バージョン {{version}} が利用可能です！`,viewUpdate:`アップデートを表示`,viewOnGithub:`GitHubで表示`,keyboardShortcuts:`キーボードショートカット (?)`,switchToLight:`ライトモードに切替`,switchToDark:`ダークモードに切替`,switchToSystem:`システムモードに切替`,smartSwitches:`スマートスイッチ`,logout:`ログアウト`,installApp:`アプリをインストール`,installAppSuccess:`Bambuddyをインストールしました`},common:{plusNMore:`他{{count}}件`,save:`保存`,saving:`保存中...`,cancel:`キャンセル`,delete:`削除`,edit:`編集`,add:`追加`,close:`閉じる`,confirm:`確認`,loading:`読み込み中...`,error:`エラー`,errorLoading:`データの読み込みエラー`,retry:`再試行`,success:`成功`,warning:`警告`,enabled:`有効`,disabled:`無効`,yes:`はい`,no:`いいえ`,on:`オン`,off:`オフ`,all:`すべて`,none:`なし`,search:`検索`,filter:`フィルター`,sort:`並べ替え`,refresh:`更新`,download:`ダウンロード`,upload:`アップロード`,uploading:`アップロード中...`,uploadFailed:`アップロード失敗`,actions:`操作`,status:`ステータス`,name:`名前`,description:`説明`,date:`日付`,time:`時間`,hours:`時間`,minutes:`分`,seconds:`秒`,days:`日`,enable:`有効化`,disable:`無効にする`,permissions:`権限`,noPrinters:`プリンターが登録されていません`,noData:`データがありません`,linkNotFound:`リンクが見つかりません`,required:`必須`,optional:`オプション`,dismiss:`閉じる`,apply:`適用`,reset:`リセット`,export:`エクスポート`,import:`インポート`,clear:`クリア`,selectAll:`すべて選択`,deselectAll:`すべて選択解除`,noChange:`— 変更なし —`,unchanged:`変更なし`,unassigned:`未割当`,unknown:`不明`,unknownError:`不明なエラー`,today:`今日`,tomorrow:`明日`,asap:`即時`,overdue:`期限超過`,now:`今すぐ`,collapse:`折りたたむ`,expand:`展開`,previous:`前へ`,next:`次へ`,viewArchive:`アーカイブを表示`,viewInFileManager:`ファイルマネージャーで表示`,addedBy:`{{username}}が追加`,prints:`プリント`,more:`+{{count}}件`,ascending:`昇順`,descending:`降順`,back:`戻る`,copy:`コピー`,copied:`コピーしました!`,printer:`プリンター`,remove:`削除`,type:`種類`,print:`印刷`,rename:`名前変更`,move:`移動`,create:`作成`,duplicate:`複製`,left:`左`,right:`右`,user:`ユーザー`,run:`実行`,running:`実行中...`},finance:{allTypes:`すべてのタイプ`,allCostCenters:`すべてのコストセンター`,title:`ファイナンス`,subtitle:`ウォレット、個人トランザクション、およびコストセンター`,noAccess:`財務データを表示する権限がありません。`,personalView:`個人ビュー`,adminView:`管理者ビュー`,createCostCenter:`コストセンターを作成`,adjustWallet:`ウォレットを調整`,addManualPrint:`手動プリントを追加`,manageMembers:`コストセンターメンバーを管理`,currentBalance:`個人残高`,transactions:`トランザクション`,personalTransactions:`個人トランザクション`,costCenters:`コストセンター`,availableForPrinting:`プリント割り当てが可能`,costCenterName:`名前`,budgetType:`予算タイプ`,monthlyBudget:`月間予算`,totalBudget:`総予算`,noBudget:`予算なし`,create:`作成`,selectUser:`ユーザーを選択`,transactionType:`タイプ`,amount:`金額`,noCostCenter:`コストセンターなし`,descriptionOptional:`説明（オプション）`,applyAdjustment:`調整を適用`,memberCanPrint:`メンバーはプリント可能`,addMember:`メンバーを追加`,canPrint:`プリント可能`,noMembers:`割り当てられたメンバーはありません。`,editCostCenter:`コストセンターを編集`,myCostCenters:`マイコストセンター`,costCentersHint:`予算限度額を確認し、コストを管理下に置きます`,noCostCenters:`コストセンターが見つかりません。`,owner:`所有者`,balance:`口座残高`,unlimited:`無制限`,budgetPolicyHint:`口座残高はコストの記録に使用されます。印刷は選択したコストセンターの予算によってのみ制限され、予算がなければ無制限です。`,budget:`予算`,shared:`共有`,cannotEditPrivateCostCenter:`プライベートコストセンターはここで編集できません`,recentTransactions:`最近のトランザクション`,transactionsHint:`タイプとコストセンターでフィルタリングしてから、ページを移動します`,first:`最初`,prev:`前へ`,next:`次へ`,last:`最後`,pageNumberOf:`ページ {{page}} / {{total}}`,noTransactions:`利用可能なトランザクションはありません。`,noTransactionsForFilter:`選択したフィルターに一致するトランザクションはありません。`,costCenter:`コストセンター`,balanceAfter:`調整後残高`,userWithId:`ユーザー #{{id}}`,partial:`部分`,editTransaction:`トランザクションを編集`,selectCostCenter:`コストセンターを選択...`,costCenterRequired:`コストセンターを選択してください`,amountExample:`例：4.00`,manualAdjustmentExample:`例：手動調整`,userRequired:`ユーザーを選択してください`,amountInvalid:`金額は有効な数値である必要があります`,createdCostCenter:`コストセンターが作成されました`,createCostCenterFailed:`コストセンターの作成に失敗しました`,transactionDeleted:`トランザクションが削除されました`,deleteTransactionFailed:`トランザクションの削除に失敗しました`,transactionEdited:`トランザクションが更新され、レジャーが再計算されました`,editTransactionFailed:`トランザクションの編集に失敗しました`,manualPrintCreated:`手動プリント料金が追加され、レジャーが再計算されました`,manualPrintFailed:`手動プリントの作成に失敗しました`,memberSaved:`メンバーが保存されました`,memberSaveFailed:`メンバーの保存に失敗しました`,memberRemoved:`メンバーが削除されました`,memberRemoveFailed:`メンバーの削除に失敗しました`,costCenterNameRequired:`コストセンター名は必須です`,costCenterUpdated:`コストセンターが更新されました`,costCenterUpdateFailed:`コストセンターの更新に失敗しました`,confirmDeleteCostCenter:`コストセンター "{{name}}" を削除しますか？`,costCenterDeleted:`コストセンターが削除されました`,costCenterDeleteFailed:`コストセンターの削除に失敗しました`,deleteTransactionConfirm:`このトランザクションを削除しますか？残高は自動的に再計算されます。`,deposit:`預金`,withdraw:`引き出し`,printCharge:`プリント料金`,deleteTransaction:`トランザクションを削除`},printers:{addPreflight:{checking:`接続を確認しています...`,warning:`一部の接続チェックに失敗しました。このプリンターはオフラインと表示される可能性があります。下のチェックを確認し、可能な範囲で修正するか、そのまま保存してください。`,back:`戻る`,saveAnyway:`そのまま保存`},title:`プリンター`,addPrinter:`プリンターを追加`,editPrinter:`プリンターを編集`,deletePrinter:`プリンターを削除`,printerName:`プリンター名`,serialNumber:`シリアル番号`,ipAddress:`IPアドレス / ホスト名`,accessCode:`アクセスコード`,model:`モデル`,nozzleCount:`ノズル数`,autoArchive:`自動アーカイブ`,status:{available:`利用可能`,idle:`待機中`,printing:`印刷中`,paused:`一時停止`,offline:`オフライン`,problem:`問題`,error:`エラー`,finished:`完了`,unknown:`不明`},temperatures:{nozzle:`ノズル`,bed:`ベッド`,chamber:`チャンバー`},heaterHistory:{title:`ヒーター履歴`,openLabel:`ヒーター履歴を表示`,nozzle:`ノズル`,nozzle2:`ノズル 2`,bed:`ベッド`,chamber:`チャンバー`,error:`履歴を読み込めませんでした`,empty:`まだデータが記録されていません`},progress:`{{percent}}% 完了`,timeRemaining:`残り {{time}}`,deleteConfirm:`「{{name}}」を削除しますか？`,maintenanceOk:`メンテナンス正常`,maintenanceWarning:`{{count}}件の警告`,maintenanceWarning_plural:`{{count}}件の警告`,maintenanceDue:`{{count}}件のメンテナンス期限`,maintenanceDue_plural:`{{count}}件の期限`,sort:{name:`名前`,status:`ステータス`,model:`モデル`,location:`ロケーション`,eta:`残り時間`,ascending:`昇順で並べ替え`,descending:`降順で並べ替え`},cardSize:{small:`小`,medium:`中`,large:`大`,extraLarge:`特大`},pageView:{openCamWallPage:`カメラウォールをページとして開く`,cards:`カード`,camWall:`カメラウォール`},camWall:{page:{tokenRejected:`このカメラウォールのリンクは無効です。トークンの有効期限が切れたか、取り消された可能性があります。`,loadFailed:`プリンターを読み込めませんでした。`},noPrinters:`表示するプリンターがありません`,noSignal:`信号なし`,live:`ライブ`,snap:`スナップ`,off:`オフ`,summary:`ライブ {{live}}件、スナップ {{snap}}件、合計 {{total}}件`,layer:`レイヤー {{cur}}/{{total}}`,timeLeft:`残り {{time}}`,statusMode:{off:`オフ`,compact:`コンパクト`,full:`フル`},settings:{title:`カメラウォール設定`,maxLive:`最大ライブ配信数`,maxLiveHint:`同時にライブ配信するタイル数。残りはスナップショットとして更新されます。`,snapshotInterval:`スナップショット間隔（秒）`,snapshotIntervalHint:`非ライブのタイルが新しいスナップショットを取得する頻度。`,statusOverlay:`ステータス表示`,statusOverlayHint:`コンパクト：状態バッジのみ。フル：＋進捗・レイヤー・残り時間。`}},hideOffline:`オフラインを非表示`,nextAvailable:`次に完了`,powerOn:`電源オン`,offlinePrintersWithPlugs:`スマートプラグ付きオフラインプリンター`,noPrintersConfigured:`プリンターが設定されていません`,search:`プリンターを検索...`,noSearchResults:`検索またはフィルターに一致するプリンターがありません`,filter:{allStatuses:`すべてのステータス`,allLocations:`すべての場所`},toolbar:{filters:`フィルター`,view:`表示`,actions:`操作`},readyToPrint:`印刷可能`,external:`外部`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`印刷アーカイブを削除`,noLabel:`ラベルなし`,printPreview:`印刷プレビュー`,width:`幅`,height:`高さ`,noObjectsFound:`オブジェクトが見つかりません`,objectsLoadedOnPrintStart:`オブジェクトは印刷開始時に読み込まれます`,willBeSkipped:`スキップされます`,name:`名前`,serialCannotBeChanged:`シリアル番号は変更できません`,locationHelp:`プリンターのグループ化とキュージョブのフィルタリングに使用`,wifiSignal:{veryWeak:`非常に弱い`,weak:`弱い`,fair:`注意`,good:`良好`,excellent:`非常に良い`},maintenanceUpToDate:`すべてのメンテナンスが最新です`,maintenance:{title:`メンテナンス中`,subtitle:`このプリンターは一時停止中です — 未接続、キュー対象外、通知も送信されません。`,pillLabel:`メンテナンス`,exitButton:`メンテナンスを終了`,menuEnter:`メンテナンスモードに入る`,menuExit:`メンテナンスモードを終了`,toastEntered:`{{name}} はメンテナンスモードになりました`,toastExited:`{{name}} がオンラインに戻りました`,confirmMidPrintTitle:`印刷中にメンテナンスモードに入りますか？`,confirmMidPrintMessage:`{{name}} は現在印刷中です。メンテナンスモードに入るとMQTTが切断され、このジョブの進行状況の追跡と完了通知が停止します。続行しますか？`,editFieldLabel:`メンテナンスモード`,editFieldHelp:`有効にすると、このプリンターはMQTT、キューディスパッチ、通知から一時停止されます — 修理、並列のBambuddyインストール、または一時的な停止に役立ちます。`},chamberLightOn:`チャンバーライトをオンにしました`,chamberLightOff:`チャンバーライトをオフにしました`,files:`ファイル`,browseFiles:`プリンターのファイルを参照`,autoOffAfterPrint:`印刷後に自動電源オフ`,autoOffExecuted:`自動オフが実行されました - リセットするにはプリンターの電源を入れてください`,hmsErrors:`クリックしてHMSエラーを表示`,viewHmsErrors:`{{count}}件のHMSエラーを表示`,resume:`再開`,pause:`一時停止`,stop:`停止`,camera:`カメラ`,skipObject:`オブジェクトスキップ`,reconnect:`再接続`,forceRefresh:`強制更新`,forceRefreshSuccess:`更新をリクエストしました`,mqttDebug:`MQTTデバッグ`,printerInformation:`プリンター情報`,copyToClipboard:`コピー`,copied:`コピーしました！`,state:`状態`,wifiSignalLabel:`WiFi信号`,developerMode:`開発者モード`,enabled:`有効`,disabled:`無効`,addedOn:`追加日`,sdCard:`SDカード`,inserted:`挿入済み`,notInserted:`未挿入`,totalPrintHours:`印刷時間`,activeNozzle:`アクティブ: {{nozzle}}ノズル`,amsSwitchInletTooltip:`フィラメント経路切替器 IN-{{inlet}}（{{side}}）— 両方のノズルに供給できます`,nozzleRack:`ノズルラック`,nozzleDocked:`ドッキング中`,nozzleMounted:`マウント中`,nozzleActive:`アクティブ`,nozzleIdle:`アイドル`,nozzleDiameter:`直径`,nozzleType:`タイプ`,nozzleStatus:`ステータス`,nozzleFilament:`フィラメント`,nozzleWear:`摩耗`,nozzleMaxTemp:`最高温度`,nozzleSerial:`シリアル`,nozzleHardenedSteel:`焼入れ鋼`,nozzleStainlessSteel:`ステンレス鋼`,nozzleTungstenCarbide:`タングステンカーバイド`,nozzleFlow:`フロー`,nozzleHighFlow:`ハイフロー`,nozzleStandardFlow:`スタンダード`,firmwareUpdate:`ファームウェアアップデート`,firmwareInstructions:`プリンターのタッチスクリーンで`,firmwareNav:`に移動`,settings:`設定`,firmware:`ファームウェア`,discoverPrinters:`プリンターを検出`,searching:`検索中...`,manualEntry:`手動入力`,addFromCloud:`クラウドから追加`,toast:{printerDeleted:`プリンターを削除しました`,missingSpoolAssignment:`{{printer}}で印刷を開始しました。以下のスプール割り当てがありません: {{slots}}`,killSwitchTriggered:`課金キルスイッチが{{printer}}で未承認の印刷を停止しました：{{filename}}`,billingChargeFailed:`{{printer}} の {{filename}} を課金できませんでした。予算予約は保持されています。サーバーログを確認してください。`,assignmentVerified:`スロット{{slot}}にフィラメントを読み込みました（{{printer}}）`,assignmentVerifiedNoKprofile:`{{printer}}のスロット{{slot}}を読み込みましたが、フロー校正プロファイル（Kプロファイル）は適用されませんでした`,assignmentNotConfirmed:`{{printer}}のスロット{{slot}}の割り当てを確認できませんでした。AMSスロットを確認してください`,printerAdded:`プリンターを追加しました`,printerUpdated:`プリンターを更新しました`,failedToDelete:`プリンターの削除に失敗しました`,failedToAdd:`プリンターの追加に失敗しました`,connectionFailedNotAdded:`プリンターに接続できませんでした。IPアドレス、シリアル番号、アクセスコードを確認し、LAN専用モードが有効になっていることを確認してください。プリンターは追加されていません。`,failedToUpdate:`プリンターの更新に失敗しました`,commandSent:`コマンドを送信しました`,failedToSendCommand:`コマンドの送信に失敗しました`,turnedOn:`{{name}} の電源をオンにしました`,failedToPowerOn:`{{name}} の電源オンに失敗しました`,scriptTriggered:`スクリプトを実行しました`,printStopped:`印刷を停止しました`,printPaused:`印刷を一時停止しました`,printResumed:`印刷を再開しました`,referenceDeleted:`リファレンスを削除しました`,detectionAreaSaved:`検出エリアを保存しました`,failedToRunScript:`スクリプトの実行に失敗しました`,failedToStopPrint:`印刷の停止に失敗しました`,failedToPausePrint:`印刷の一時停止に失敗しました`,failedToResumePrint:`印刷の再開に失敗しました`,failedToControlChamberLight:`チャンバーライトの制御に失敗しました`,failedToSetSpeed:`印刷速度の設定に失敗しました`,failedToUpdateSetting:`設定の更新に失敗しました`,failedToSkipObjects:`オブジェクトのスキップに失敗しました`,failedToRereadRfid:`RFIDの再読み取りに失敗しました`,failedToCheckPlate:`プレートの確認に失敗しました`,failedToUpdateLabel:`ラベルの更新に失敗しました`,failedToDeleteReference:`リファレンスの削除に失敗しました`,failedToSaveDetectionArea:`検出エリアの保存に失敗しました`,plateCheckEnabled:`プレートチェックを有効にしました`,plateCheckDisabled:`プレートチェックを無効にしました`,calibrationSaved:`キャリブレーションを保存しました！`,calibrationFailed:`キャリブレーションに失敗しました`,rfidRereadInitiated:`RFID再読み取りを開始しました`,loadInitiated:`フィラメントをロード中…`,unloadInitiated:`フィラメントをアンロード中…`,failedToLoad:`フィラメントのロードに失敗`,failedToUnload:`フィラメントのアンロードに失敗`},connection:{connected:`接続中`,offline:`オフライン`},plateStatus:{markCleared:`プレートをクリア済みにする`,cleared:`プレートクリア済み`,notCleared:`プレート未クリア`,inUse:`プレート使用中`},queue:{inQueue:`キュー内 {{count}} 件`,inQueue_plural:`{{count}}件がキュー内`},controls:`コントロール`,rfid:{reread:`RFID再読み取り`},ams:{load:`ロード`,unload:`アンロード`,feedTitle:`{{slot}} をどちらのノズルにロードしますか？`,feedPrompt:`Filament Track Switch はこのスロットをどちらのホットエンドにも送れます。送り先を選択してください。`,feedLeft:`左ノズル`,feedRight:`右ノズル`,feedAlreadyLoaded:`ロード済み`,switchNotReady:`Filament Track Switch がまだ設定されていません。プリンター側で各 AMS を入口に割り当ててから、もう一度お試しください。`},bedJog:{limitWarning:`手動移動では可動範囲の制限が適用されません。Bambu のファームウェアの不具合により、リモートコマンドではソフトウェアリミットが無視されます。衝突しないよう注意して操作してください。`,title:`ジョグ操作`,bed:`ベッド`,step:`ステップ (mm)`,up:`プレートを上へ`,down:`プレートを下へ`,toolheadUp:`ツールヘッドを上へ`,toolheadDown:`ツールヘッドを下へ`,disabledWhilePrinting:`印刷中は無効`,notHomedTitle:`プリンターがホーミングされていません`,notHomedMessage:`前回の印刷以降、プリンターがホーミングされていません。安全な位置決めのためにまずオートホーミングを実行するか（ツールヘッドをパークしてからX・Y・Zをホーミングします）、このまま移動してください — ソフトエンドストップはバイパスされます。`,homeZ:`オートホーミング`,moveAnyway:`このまま移動`,homingStarted:`プリンターをオートホーミング中…`},permission:{noAdd:`プリンターを追加する権限がありません`,noEdit:`プリンターを編集する権限がありません`,noDelete:`プリンターを削除する権限がありません`,noControl:`プリンターを制御する権限がありません`,noFiles:`このディレクトリにファイルがありません`,noAmsRfid:`AMS RFIDを再読み取りする権限がありません`,noSmartPlugControl:`スマートプラグを制御する権限がありません`,noCamera:`カメラを表示する権限がありません`},modal:{addTitle:`プリンターを追加`,editTitle:`プリンターを編集`,myPrinter:`マイプリンター`,selectModel:`モデルを選択...`,locationGroup:`ロケーション / グループ`,locationPlaceholder:`例: 工房、オフィス、地下室`,autoArchiveLabel:`完了した印刷を自動アーカイブ`,fromPrinterSettings:`プリンターの設定から取得`,modelOptional:`モデル（任意）`,saveChanges:`変更を保存`},skipObjects:{tooltip:`オブジェクトスキップ`,onlyWhilePrinting:`オブジェクトスキップ（印刷中のみ）`,requiresMultiple:`オブジェクトスキップ（2個以上必要）`,title:`オブジェクトスキップ`,matchIdsInfo:`プリンター画面のIDと照合してください`,printerShowsIds:`プリンター画面にビルドプレート上のオブジェクトIDが表示されます`,skipSelected:`選択をスキップ`,skipping:`スキップ中...`,noObjectsSelected:`オブジェクトが選択されていません`,selectObjectsToSkip:`現在の印刷からスキップするオブジェクトを選択してください`,skipped:`スキップ済み`,objectsSkipped:`オブジェクトをスキップしました`,activeCount:`{{count}}個アクティブ`,waitForLayer:`オブジェクトをスキップするにはレイヤー2以降をお待ちください（現在レイヤー{{layer}}）`,skip:`スキップ`,confirmTitle:`オブジェクトをスキップしますか？`,confirmMessage:`「{{name}}」をスキップしますか？この操作は元に戻せません。`,confirmAllMessage:`残りのオブジェクトがすべて選択されています。印刷ジョブは停止します。続行しますか？`,confirmMultipleMessage:`選択した{{count}}個のオブジェクトをスキップしますか？この操作は元に戻せません。`},confirm:{deleteTitle:`プリンターを削除`,deleteMessage:`「{{name}}」を削除しますか？すべての接続設定が削除されます。`,deleteArchivesNote:`このプリンターのすべての印刷履歴が完全に削除されます。`,keepArchivesNote:`印刷履歴は保持されますが、このプリンターとの関連は解除されます。`,stopTitle:`印刷を停止`,stopMessage:`「{{name}}」の現在の印刷を停止しますか？印刷ジョブがキャンセルされます。`,stopButton:`印刷を停止`,pauseTitle:`印刷を一時停止`,pauseMessage:`「{{name}}」の現在の印刷を一時停止しますか？`,pauseButton:`印刷を一時停止`,resumeTitle:`印刷を再開`,resumeMessage:`「{{name}}」の印刷を再開しますか？`,resumeButton:`印刷を再開`,powerOnTitle:`プリンターの電源をオン`,powerOnMessage:`「{{name}}」の電源をオンにしますか？`,powerOnButton:`電源オン`,powerOffTitle:`プリンターの電源をオフ`,powerOffMessage:`「{{name}}」の電源をオフにしますか？`,powerOffWarning:`警告: 「{{name}}」は現在印刷中です！電源をオフにしますか？印刷が中断され、プリンターが損傷する可能性があります。`,powerOffButton:`電源オフ`,haToggleTitle:`「{{name}}」を切り替え`,haToggleMessage:`Home Assistant エンティティ {{entity}} を切り替えますか？現在オンの場合、電源がオフになる可能性があります。`,haToggleWarning:`警告: 「{{name}}」は現在印刷中です！{{entity}} を切り替えると電源が切れ、印刷が中断される可能性があります。続行しますか？`,haToggleButton:`切り替え`},bulk:{select:`選択`,selectAll:`すべて選択`,selectByLocation:`場所で選択`,selected:`{{count}}件選択中`,actions:{stop:`停止`,pause:`一時停止`,resume:`再開`,clearPlate:`ベッドをクリア`,clearHMS:`通知をクリア`},confirm:{stopTitle:`{{count}}件の印刷を停止`,stopMessage:`{{count}}台のプリンターのアクティブな印刷をキャンセルします。この操作は元に戻せません。`,stopButton:`すべて停止`,pauseTitle:`{{count}}件の印刷を一時停止`,pauseMessage:`{{count}}台のプリンターのアクティブな印刷を一時停止します。`,pauseButton:`すべて一時停止`,clearPlateTitle:`{{count}}台のプリントベッドをクリア`,clearPlateMessage:`{{count}}台のプリンターのプリントベッドをクリアし、キュー内のジョブが開始される場合があります。`,clearPlateButton:`すべてクリア`},success:`{{count}}台のプリンターで{{action}}が完了`,partial:`{{succeeded}}件成功、{{failed}}件失敗`,noneApplicable:`選択したプリンターにこのアクションに適した状態のものがありません`,selectByState:`ステータスで選択`},discovery:{title:`プリンター`,searching:`検索中...`,scanning:`スキャン中...`,scanProgress:`スキャン中... {{scanned}}/{{total}}`,foundPrinters:`{{count}}台のプリンターを検出`,noPrintersFound:`プリンターが見つかりません`,noPrintersFoundSubnet:`指定されたサブネットにプリンターが見つかりません。`,noPrintersFoundNetwork:`ネットワーク上にプリンターが見つかりません。`,allConfigured:`検出されたすべてのプリンターは既に設定済みです。`,alreadyAdded:`追加済み`,select:`選択`,manualEntry:`手動入力`,addFromCloud:`クラウドから追加`,subnetToScan:`スキャンするサブネット`,dockerNote:`Dockerを検出しました。プリンターのサブネットをCIDR表記で入力してください。docker-compose.ymlでnetwork_mode: hostが必要です。`,scanSubnet:`サブネットをスキャンしてプリンターを検出`,discoverNetwork:`ネットワーク上のプリンターを検出`,scanningSubnet:`サブネットでBambuプリンターをスキャン中...`,scanningNetwork:`ネットワークをスキャン中...`,serialRequired:`シリアル番号が必要です`,unknown:`不明`,failedToStart:`印刷の開始に失敗しました`,customSubnetOption:`カスタムサブネット...`,customSubnetLabel:`カスタムサブネット (CIDR)`,customSubnetNote:`プリンターがこのサーバーと別のネットワークにある場合は、カスタムサブネットを使用してください。FTP (990) と MQTT (8883) のポートが、ルーティング境界を越えて到達可能である必要があります。`},drying:{start:`乾燥開始`,stop:`乾燥停止`,temperature:`温度`,duration:`時間`,hours:`時間`,timeRemaining:`残り {{time}}`,active:`乾燥中`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`乾燥非対応`,powerRequired:`AMS電源アダプターを接続して乾燥を有効にしてください`,cannotDryNow:`AMSは現在乾燥を開始できません`,startingDrying:`乾燥を開始しています...`,toastCommandSent:`乾燥コマンドを送信しました`,toastStopped:`乾燥を停止しました`,toastNotStarted:`プリンターはコマンドを受け付けましたが、AMS は乾燥を開始しませんでした。AMS の電源アダプターが接続されているか、プリンターがアイドル状態かを確認してください。`,screenOnly:`このプリンターでは、AMS の乾燥はプリンター本体の画面からのみ操作できます (Bambu の仕様上の制限)`,stoppingDrying:`乾燥を停止しています...`,rotateTray:`乾燥中にスプールを回転`,rotateUnavailableReason:`利用不可 — このAMSのスロットがツールヘッドにロードされています。スプールが供給チューブで固定されているため回転できません。先にフィラメントを引き戻してください。`,startMode:`開始時刻`,modeNow:`今すぐ`,modeDelay:`時間経過後`,modeAtTime:`時刻指定`,schedule:`予約する`,scheduledFor:`乾燥予約: {{time}}`,scheduledAsap:`乾燥予約済み（プリンター待ち）`,cancelScheduled:`乾燥予約をキャンセル`,scheduleFailed:`乾燥の予約に失敗しました`,retractFilament:`AMS出口のフィラメントを引き戻すと乾燥を開始できます`,waitingAmsNotFound:`AMSの検出待ち`,waitingOffline:`プリンターのオンライン復帰待ち`,waitingPrinterBusy:`プリンターが空くのを待機中`,waitingAlreadyDrying:`実行中の乾燥サイクルの終了待ち`,waitingInterrupted:`中断されました。プリンターが空き次第、再開します`,scheduleFailedReason:`予約した乾燥に失敗しました: {{reason}}`,scheduleFailedUnknown:`不明なエラー`,dismissFailed:`閉じる`},amsBackup:{titleOn:`AMSフィラメントバックアップはONです。クリックして無効化します。`,titleOff:`AMSフィラメントバックアップはOFFです。クリックして有効化します。`,titleUnknown:`このプリンタではAMSフィラメントバックアップ状態を確認できません。`,toastEnabled:`AMSフィラメントバックアップを有効化しました`,toastDisabled:`AMSフィラメントバックアップを無効化しました`,modalTitle:`AMS フィラメントバックアップ`,modalHelp:`アクティブなスロットが空になると、プリンターは同じプリセット・同じ色のスロットをこの順序で循環します。`,modalNoSlots:`フィラメントが読み込まれていません。`,modalNoPairs:`バックアップペアがありません — プリセットと色の両方が一致するスロットがありません。`,extruderRightShort:`右`,extruderLeftShort:`左`,stateOn:`有効`,stateOff:`無効`,stateUnknown:`このプリンターでは未対応`},activeJobSlot:{title:`このスロットはアクティブな印刷のフィラメント {{n}} です`,ariaLabel:`アクティブ印刷スロット {{n}}`},expectedSlot:{title:`プリンターはこのスロットのフィラメントを待っています`,ariaLabel:`要求スロット {{n}}`,label:`{{ams}} · スロット {{slot}}`,external:`外部スプール`},filaments:`フィラメント`,externalSpool:{hide:`外部スプールを非表示にする`,show:`外部スプールを表示する`},openCameraOverlay:`カメラオーバーレイを開く`,openCameraWindow:`カメラを新しいウィンドウで開く`,firmwareUpdateAvailable:`ファームウェアアップデートあり: {{current}} → {{latest}}`,firmwareUpToDate:`ファームウェア {{version}} — 最新`,firmwareUpdateButton:`アップデート`,plateDetection:{noPermission:`このページにアクセスする権限がありません。`,enabledClick:`プレートチェック有効 - クリックして無効化`,disabledClick:`プレートチェック無効 - クリックして有効化`,manageCalibration:`プレート検出キャリブレーションを管理`,calibrationRequired:`キャリブレーションが必要です`,calibrationInstructions:`ビルドプレートが<strong>完全に空</strong>であることを確認してから、キャリブレーションをクリックしてください。`,calibrationDescription:`キャリブレーションは空のプレートのリファレンス画像を撮影します。以降のチェックではこのリファレンスと比較してオブジェクトを検出します。`,calibrationTip:`<strong>ヒント:</strong> 異なるプレート用に最大5つのキャリブレーションを保存できます。チェック時に最適なものが自動的に使用されます。`,plateEmpty:`プレートは空のようです`,objectsDetected:`オブジェクトを検出しました`,confidence:`信頼度`,difference:`差分`,analysisPreview:`分析プレビュー:`,analysisLegend:`緑の枠 = 検出エリア、赤のオーバーレイ = キャリブレーションとの差分`,savedReferences:`保存済みリファレンス ({{count}}/{{max}})`,deleteReference:`リファレンスを削除`,labelPlaceholder:`ラベル...`,clickToEdit:`{{label}} - クリックして編集`,clickToAddLabel:`クリックしてラベルを追加`},speed:{title:`印刷速度`,silent:`サイレント (50%)`,standard:`スタンダード (100%)`,sport:`スポーツ (124%)`,ludicrous:`ルディクラス (166%)`},airduct:{title:`エアダクトモード`,cooling:`冷却`,heating:`加熱`},noSdCard:`SDなし`,door:{open:`開`,closed:`閉`},fans:{partCooling:`パーツ冷却ファン`,auxiliary:`補助ファン`,leftAuxiliary:`左補助ファン`,exhaust:`排気`,chamber:`チャンバーファン`},clickToViewHmsErrors:`クリックしてHMSエラーを表示`,aiDetection:{safe:`安全`,warning:`警告`,failure:`失敗`,idle:`待機中`,error:`確認していません`,unknown:`開始中`,tooltipError:`AI 失敗検出はこの印刷を確認していません: {{reason}} - クリックで詳細を表示`,tooltipUnknown:`AI 失敗検出: 最初の結果を待機中 - クリックで詳細を表示`,errorHint:`この印刷は確認されていません。下記の問題が解決されると、検出は自動的に再開されます。`,tooltip:`AI 失敗検出: {{status}}（スコア {{score}}）- クリックで詳細を表示`,tooltipIdle:`AI 失敗検出が有効 - 次の印刷から監視を開始します - クリックで詳細を表示`,modalTitle:`AI 失敗検出 - {{name}}`,currentStatus:`ステータス`,score:`スコア`,framesAnalyzed:`解析フレーム数`,idleHint:`現在監視中の印刷はありません。次の印刷から自動的に監視を開始します。`,lastError:`最後のエラー`,openSettings:`設定を開く`},estimatedCompletion:`完了予定時刻`,plateNumber:`プレート {{number}}`,slotOptions:`スロットオプション`,amsPopup:{friendlyName:`AMS名`,friendlyNamePlaceholder:`例: AMS フレンドリー名`,serialNumber:`シリアル番号`,firmwareVersion:`ファームウェア`,save:`保存`,clear:`クリア`,noEditPermission:`AMS ユニットの名前を変更する権限がありません`},firmwareModal:{title:`ファームウェアアップデート`,titleUpToDate:`ファームウェア情報`,currentVersion:`現在のバージョン`,latestVersion:`最新バージョン`,releaseNotes:`リリースノート`,checkingPrereqs:`前提条件を確認中...`,sdCardReady:`SDカード準備完了。下をクリックしてファームウェアをアップロードしてください。`,uploadedSuccess:`ファームウェアをSDカードにアップロードしました！`,applyInstructions:`プリンターでアップデートを適用するには:`,step1:`プリンターのタッチスクリーンで設定に移動`,step2:`ファームウェアに移動`,step3:`SDカードからアップデートを選択`,step4:`アップデートには10〜20分かかります`,done:`完了`,starting:`開始中...`,uploadFirmware:`ファームウェアをアップロード`,uploadFailed:`アップロード開始に失敗しました: {{error}}`,uploadedToast:`ファームウェアをアップロードしました！プリンター画面からアップデートを実行してください。`,availableVersions:`利用可能なバージョン`,usable:`利用可`,unavailable:`利用不可`,installed:`インストール済み`,newerBadge:`新しい`,olderBadge:`古い`,currentBadge:`現在`},accessCodePlaceholder:`プリンター設定から取得`,roi:{title:`プリンター`,xStart:`X開始`,yStart:`Y開始`,width:`幅`,height:`高さ`,instruction:`ビルドプレートに焦点を合わせるように検出エリアを調整してください。プレビューの緑の枠が現在のエリアを示しています。`},developerModeWarning:`開発者LANモードが有効になっていません: {{names}}。一部の機能が動作しない可能性があります。`,howToEnable:`有効化方法`,incompatibleFile:`このファイルは{{slicedFor}}用にスライスされていますが、このプリンターは{{printerModel}}です`,dropNotPrintable:`.gcodeおよび.gcode.3mfファイルのみ印刷できます`,dropToPrint:`ドロップして印刷`,dropToQueue:`ドロップしてキューに追加`},archives:{media:{title:`印刷動画`,download:`印刷動画をダウンロード`,searching:`プリンター上の動画を確認しています…`,searchFailed:`プリンター上の動画を確認できませんでした。`,none:`この印刷のタイムラプスまたは IP カメラの動画断片は見つかりませんでした。`,attachedTimelapse:`添付済みタイムラプス`,printerFiles:`プリンターに残っているファイル`,downloadSelected:`選択項目をダウンロード`,printerMissing:`プリンターは設定から削除されています`,timelapseUnavailable:`タイムラプスディレクトリを読み取れませんでした`,ipcamUnavailable:`IP カメラディレクトリを読み取れませんでした`},title:`印刷アーカイブ`,no3mfBanner:{title:`最近の一部の印刷でサムネイル付きのアーカイブができませんでした`,body:`スライサーがプリンターのSDカードに.gcode.3mfファイルを残さなかったため、Bambuddyはサムネイルもスライサーメタデータも取得できませんでした。これは通常、スライサー (Bambu Studio / OrcaSlicer のデバイスタブ) で「送信ファイルを外部ストレージに保存」がオフになっていることが原因です。`,docsLink:`インストール手順4を参照`,docsLinkInternalStorage:`原因について`,titleInternalStorage:`最近の一部の印刷はプリンターの内部ストレージに残りました`,bodyInternalStorage:`Bambu Studio がスライス済みファイルをカードではなくプリンターの内部ストレージに保存したため、Bambuddy が FTP で読み取れるものがありませんでした。H2 シリーズ、P2S、X2D では「印刷」ボタンは常にそうなり、選択できるのは「送信」だけで、そちらも既定は「キャッシュ」です。これらの印刷は名前と時間付きでアーカイブされますが、サムネイルとスライサーのメタデータはありません。完全なアーカイブを残すには、Bambuddy から印刷を開始するか、OrcaSlicer でスライスしてください。Bambu Studio を使う場合は「送信」で「外部ストレージ」を選び、その後に印刷を開始します。いずれもプリンターにカードまたは USB メモリーが必要です。`,titleNoExternalStorage:`最近の一部の印刷をアーカイブできませんでした — プリンターにストレージがありません`,bodyNoExternalStorage:`プリンターのスロットにカードもUSBメモリも検出されないため、スライス済みファイルの保存先がなく、Bambuddyが読み取るものもありませんでした。挿入すれば次の印刷は完全にアーカイブされます。`,titleInternalHistory:`最近の一部の印刷は、すでにプリンター内にあるファイルから開始されました`,bodyInternalHistory:`これらの印刷はプリンター自身のライブラリから実行されました — 画面からの再印刷、Handy からの開始、または以前に送信して後から印刷したファイルです。Bambuddy は印刷ファイルを FTP で読み取りますが、FTP が扱えるのはカードまたは USB メモリだけで、プリンターはそのライブラリを FTP の届かない領域に保存するため、読み取れる 3MF がありませんでした。これらの印刷では何も送信されていないので、スライサーの設定を変えても解決しません。名前と時間付きでのアーカイブは続き、「アーカイブを編集」で使用フィラメントを手入力できます。完全なアーカイブにするには、Bambuddy またはスライサーから印刷を開始してください。`,titleFtpsCooloff:`最近の一部の印刷を保存できませんでした — プリンターがファイル接続を拒否しました`,bodyFtpsCooloff:`Bambuddy がプリンターのファイル転送ポート (FTPS 990) を開いたところ、プリンターは TLS ではないもので応答したため、何も読み取れませんでした。これらの印刷は名前と時間付きでアーカイブされていますが、サムネイルとスライサーのメタデータはありません。これはスライサーの設定でも、お客様が変更したことでもありません。同じ機種・同じファームウェアが他の環境では正常に動作しており、影響を受けたプリンターも通常はしばらくすると自然に復帰します。この失敗のあと Bambuddy はそのプリンターへの転送を 5 分間停止し、停止が明けてからファイルを取りに戻ります。短時間の事象であれば自動的に埋まり、カードが空のままであれば拒否が再試行より長く続いたことを意味します。原因はまだ分かっていません。繰り返す場合は、システムページでデバッグログを有効にし、サポートバンドルを報告に添付してください。`,titleFtpTransferFailed:`最近の一部の印刷を保存できませんでした — ファイル転送が時間切れになりました`,bodyFtpTransferFailed:`スライス済みファイルはプリンターのカードにあり、プリンターも実際に送り出していましたが、許容時間内に転送が完了しませんでした。印刷開始時のプリンターはカメラ、ステータス通知、ジョブのアップロードも同時に処理しているため、大きな 3MF はその中を通り切れないことがあります。これらの印刷は名前と時間つきで保存されていますが、サムネイルとスライサー情報がありません。これはスライサーの設定ではなく、お客様が変更した結果でもありません。Bambuddy はその後 10 分のあいだにファイルを 3 回取りに戻るため、多くはひとりでに埋まります。カードが空のままの場合は、そのすべての試行も時間切れになったということです。繰り返す場合は、設定 > ネットワーク > FTP リトライ の 接続タイムアウト を大きくしてください。`,dismissLabel:`この通知を閉じる`},searchPlaceholder:`アーカイブを検索...`,filterByPrinter:`プリンターで絞り込み`,filterByStatus:`ステータスで絞り込み`,sortBy:`並べ替え`,sortNewest:`新しい順`,sortOldest:`古い順`,sortName:`名前順`,sortDuration:`時間順`,sortLargest:`大きい順`,sortSmallest:`小さい順`,sortSize:`サイズ`,noArchives:`アーカイブが見つかりません`,noArchivesSearch:`検索条件に一致するアーカイブがありません`,originalPrintNotVisible:`元の印刷が表示されていません - フィルターをクリアしてみてください`,noArchivesYet:`アーカイブはまだありません`,prints:`件`,pagination:{showing:`表示中`,to:`〜`,of:`/`,show:`表示`,page:`ページ`,all:`すべて`},loadingArchives:`アーカイブを読み込み中...`,releaseToUpload:`ドロップしてアップロード`,showAll:`すべて表示`,showFavoritesOnly:`お気に入りのみ表示`,gridView:`グリッド表示`,listView:`リスト表示`,calendarView:`カレンダー表示`,logView:`印刷ログ`,manageTags:`タグを管理`,showFailedPrints:`失敗した印刷を表示`,hideFailedPrints:`失敗した印刷を非表示`,hideDuplicates:`重複を非表示`,viewOriginalPrint:`クリックして元の印刷を表示 (#{{id}})`,printTime:`印刷時間`,filamentUsed:`フィラメント使用量`,cost:`コスト`,preview:`プレビュー`,deleteArchive:`アーカイブを削除`,deleteConfirm:`このアーカイブを削除しますか？`,favorite:`お気に入り`,unfavorite:`お気に入りから削除`,viewDetails:`詳細を表示`,status:{completed:`完了`,failed:`失敗`,stopped:`中止`},toast:{source3mfAttached:`ソース3MFを添付しました: {{filename}}`,failedUploadSource3mf:`ソース3MFのアップロードに失敗しました`,source3mfRemoved:`ソース3MFを削除しました`,failedRemoveSource3mf:`ソース3MFの削除に失敗しました`,f3dAttached:`F3Dを添付しました: {{filename}}`,failedUploadF3d:`F3Dのアップロードに失敗しました`,f3dRemoved:`F3Dを削除しました`,failedRemoveF3d:`F3Dの削除に失敗しました`,timelapseAttached:`タイムラプスを添付しました: {{filename}}`,timelapseAlreadyAttached:`タイムラプスは既に添付されています`,noMatchingTimelapse:`一致するタイムラプスが見つかりません`,failedScanTimelapse:`タイムラプスのスキャンに失敗しました`,failedAttachTimelapse:`タイムラプスの添付に失敗しました`,timelapseRemoved:`タイムラプスを削除しました`,failedRemoveTimelapse:`タイムラプスの削除に失敗しました`,timelapseUploaded:`タイムラプスをアップロードしました: {{filename}}`,failedUploadTimelapse:`タイムラプスのアップロードに失敗しました`,archiveDeleted:`アーカイブを削除しました`,failedDeleteArchive:`アーカイブの削除に失敗しました`,addedToFavorites:`お気に入りに追加しました`,removedFromFavorites:`お気に入りから削除しました`,projectUpdated:`プロジェクトを更新しました`,failedUpdateProject:`プロジェクトの更新に失敗しました`,linkCopied:`リンクをクリップボードにコピーしました`,failedCopyLink:`リンクのコピーに失敗しました`,photoDeleted:`写真を削除しました`,failedDeletePhoto:`写真の削除に失敗しました`,failedDeleteArchives:`アーカイブの削除に失敗しました`,failedUpdateFavorites:`お気に入りの更新に失敗しました`,exportDownloaded:`エクスポートをダウンロードしました`,exportFailed:`エクスポートに失敗しました`},menu:{print:`印刷`,openInBambuStudio:`スライサーで開く`,slice:`スライス`,externalLink:`外部リンク`,viewOnMakerWorld:`MakerWorldで表示`,preview3d:`3Dプレビュー`,viewTimelapse:`タイムラプスを表示`,scanForTimelapse:`タイムラプスをスキャン`,uploadTimelapse:`タイムラプスをアップロード`,removeTimelapse:`タイムラプスを削除`,downloadSource3mf:`ソース3MFをダウンロード`,uploadSource3mf:`ソース3MFをアップロード`,replaceSource3mf:`ソース3MFを置換`,removeSource3mf:`ソース3MFを削除`,uploadF3d:`F3Dをアップロード`,replaceF3d:`F3Dを置換`,downloadF3d:`Fusion 360デザインファイルをダウンロード`,removeF3d:`F3Dを削除`,download:`ダウンロード`,copyDownloadLink:`ダウンロードリンクをコピー`,qrCode:`QRコード`,viewPhotos:`写真を表示`,viewPhotosCount:`写真を表示 ({{count}})`,projectPage:`プロジェクトページ`,addToFavorites:`お気に入りに追加`,removeFromFavorites:`お気に入りから削除`,edit:`編集`,printLog:`印刷ログ`,goToProject:`プロジェクトへ: {{name}}`,addToProject:`プロジェクトに追加`,removeFromProject:`プロジェクトから削除`,loading:`アーカイブを読み込み中...`,noProjectsAvailable:`利用可能なプロジェクトがありません`,searchProjects:`プロジェクトを検索…`,select:`選択`,deselect:`選択解除`,delete:`削除`},permission:{noReprint:`このアーカイブを再印刷する権限がありません`,noAddToQueue:`キューに追加する権限がありません`,noUpdateArchives:`アーカイブを更新する権限がありません`,noUploadFiles:`ファイルをアップロードする権限がありません`,noDownload:`アーカイブをダウンロードする権限がありません`,noCopyLink:`ダウンロードリンクをコピーする権限がありません`,noDelete:`このアーカイブを削除する権限がありません`,noEdit:`このエントリを編集する権限がありません`,noCreate:`アーカイブを作成する権限がありません`},platePicker:{title:`プレビューするプレートを選択`,hint:`このアーカイブには複数のプレートがあります。GCodeビューアで開くプレートを選択してください。`,plateLabel:`プレート {{index}}`,objectCount:`{{count}} オブジェクト`,objectCount_plural:`{{count}} オブジェクト`,noGcode:`このアーカイブにはプレビュー可能なスライス済みGコードがありません。まずBambu Studioで開いてスライスしてください。`},card:{previousPlate:`前のプレート`,nextPlate:`次のプレート`,plateNumber:`プレート {{index}}`,moreOptions:`その他のオプション`,addToFavorites:`お気に入りに追加`,removeFromFavorites:`お気に入りから削除`,cancelled:`キャンセル`,failed:`失敗`,duplicate:`重複`,duplicateTitle:`このモデルは以前印刷されています`,openSource3mf:`ソース3MFをBambu Studioで開く（右クリックでオプション表示）`,downloadF3d:`Fusion 360デザインファイルをダウンロード`,viewTimelapse:`タイムラプスを表示`,viewPhoto:`写真を表示`,viewPhotos:`{{count}}枚の写真を表示`,openFolder:`フォルダーを開く: {{name}}`,slicedFile:`スライス済みファイル - 印刷可能`,sourceFile:`ソースファイルのみ - AMSマッピング不可`,gcode:`GCODE`,source:`ソース`,project:`プロジェクト: {{name}}`,runsBadge:`{{count}} 回印刷`,runsBadgeTitle:`合計 {{count}} 回 — 成功 {{successful}} 回、失敗 {{failed}} 回。クリックして印刷ログを開きます。`,estimated:`推定: {{time}}`,actual:`実際: {{time}}`,accuracy:`精度: {{percent}}%`,filament:`{{weight}} g`,layer:`{{count}} レイヤー`,layers:`{{count}} レイヤー`,object:`{{count}}オブジェクト`,objects:`{{count}}オブジェクト`,slicedFor:`{{model}}用にスライス`,uploadedBy:`アップロード者`,noPermissionReprint:`再印刷する権限がありません`,noFileForReprint:`3MFファイルがありません — 印刷記録時にプリンターからファイルをダウンロードできませんでした`,slicerAmsMapping:`AMSマッピングを保存済み（{{printer}}）`,slicerAmsMappingTooltip:`スライサーが選んだAMSスロットは{{printer}}用に保存されています。スロット番号はそのプリンターでのみ意味を持つため、再印刷で再利用されるのは再び{{printer}}に送る場合だけです。`,noPermissionEdit:`プロファイルを編集する権限がありません`,noPermissionDelete:`アーカイブを削除する権限がありません`,openInBambuStudio:`スライサーで開く`,openInBambuStudioToSlice:`スライサーでスライス`,slice:`スライス`,externalLink:`外部リンク`,makerWorld:`MakerWorld – {{designer}}`,viewProject:`プロジェクトを表示`,noExternalLink:`外部リンクなし`,preview3d:`3Dプレビュー`,download:`ダウンロード`,edit:`編集`,delete:`削除`},runLog:{title:`印刷ログ`,modalTitle:`印刷ログ — {{name}}`,modalTitleFallback:`このアーカイブ`,empty:`このアーカイブの印刷イベントはまだ記録されていません。`,col:{date:`日付`,status:`ステータス`,duration:`時間`,filament:`フィラメント`,cost:`コスト`},status:{completed:`完了`,failed:`失敗`,cancelled:`キャンセル`,stopped:`停止`,skipped:`スキップ`,printing:`印刷中`}},modal:{deleteArchive:`アーカイブを削除`,deleteConfirm:`"{{name}}" を削除しますか？この操作は取り消せません。`,deleteButton:`削除`,deletePurgeStats:`このプリントをQuick Statsからも削除（フィラメント、時間、コスト、電力）`,deleteQueueItemsWarning:`このアーカイブにリンクされた {{count}} 件のキュー項目も削除されます。`,deleteBlockedByPrinting:`削除できません — {{count}} 件のキュー項目が現在印刷中です。先に印刷を停止してから再試行してください。`,removeSource3mf:`ソース3MFを削除`,removeSource3mfConfirm:`"{{name}}"からソース3MFファイルを削除してもよろしいですか？元のスライサープロジェクトファイルが削除されます。`,removeButton:`削除`,removeF3d:`F3Dを削除`,removeF3dConfirm:`"{{name}}"からFusion 360デザインファイルを削除してもよろしいですか？`,removeTimelapse:`タイムラプスを削除`,removeTimelapseConfirm:`"{{name}}"からタイムラプス動画を削除してもよろしいですか？`,timelapse:`{{name}} - タイムラプス`,selectTimelapse:`タイムラプスを選択`,selectTimelapseDesc:`自動一致が見つかりませんでした。この印刷のタイムラプスを選択してください:`,deleteArchives:`印刷アーカイブを削除`,deleteArchivesConfirm:`{{count}}件のアーカイブを削除しますか？この操作は元に戻せません。`,deleteCount:`{{count}}件を削除`},page:{title:`印刷アーカイブ`,printsCount:`{{filtered}} / {{total}} 件のプリント`,dropFilesHere:`.3mfファイルをここにドロップ`,releaseToUpload:`ドロップしてアップロード`,only3mfSupported:`.3mfファイルのみ対応しています`,close:`閉じる`,selected:`{{count}}件選択中`,selectAll:`すべて選択`,tags:`タグ`,project:`プロジェクト`,favorite:`お気に入り`,delete:`削除`,toggledFavorites:`{{count}}件のアーカイブのお気に入りを切替えました`,failedUpdateFavorites:`お気に入りの更新に失敗しました`,archivesDeleted:`{{count}}件のアーカイブを削除しました`,failedDeleteArchives:`アーカイブの削除に失敗しました`,photoDeleted:`写真を削除しました`,failedDeletePhoto:`写真の削除に失敗しました`},list:{name:`名前`,printer:`プリンター`,date:`日付`,size:`サイズ`,actions:`操作`,hasTimelapse:`タイムラプスあり`},log:{date:`日時`,printName:`印刷名`,printer:`プリンター`,user:`ユーザー`,status:`ステータス`,duration:`所要時間`,filament:`フィラメント`,filamentUsed:`使用フィラメント量`,cost:`コスト`,energy:`電力量`,energyCost:`電力コスト`,completedAt:`終了`,columns:`列`,sortBy:`{{column}} で並べ替え`,allPrinters:`全プリンター`,allUsers:`全ユーザー`,allStatuses:`全ステータス`,cancelled:`キャンセル`,skipped:`スキップ`,dateFrom:`開始日`,dateTo:`終了日`,noEntries:`印刷ログが見つかりません`,showing:`{{total}}件中{{count}}件を表示`,rowsPerPage:`行数`,page:`ページ`,prev:`前へ`,next:`次へ`,clearLog:`ログをクリア`,clearLogTitle:`印刷ログをクリア`,clearLogConfirm:`すべての印刷ログエントリが完全に削除されます。アーカイブとキューアイテムには影響しません。この操作は元に戻せません。よろしいですか？`,clearLogButton:`すべてクリア`,cleared:`{{count}}件のログエントリを削除しました`,clearFailed:`印刷ログの削除に失敗しました`,deleteEntryTitle:`印刷ログのエントリを削除`,deleteEntryConfirm:`このエントリはログから削除され、フィラメント、時間、コストの寄与はクイック統計から除外されます。対応するアーカイブ（ある場合）は影響を受けません。この操作は取り消せません。`,entryDeleted:`印刷ログのエントリを削除しました`,entryDeleteFailed:`印刷ログのエントリを削除できませんでした`,editEntryTitle:`印刷ログのエントリを編集`,editEntryDescription:`この印刷を分類します。失敗分析ウィジェットはこれらの値でグループ化されるため、更新は即座に統計に反映されます。`,entryUpdated:`印刷ログのエントリを更新しました`,entryUpdateFailed:`印刷ログのエントリを更新できませんでした`,statuses:{completed:`完了`,failed:`失敗`,stopped:`停止`,cancelled:`キャンセル`,skipped:`スキップ`}}},dispatchToast:{untitled:`印刷ジョブ`,startingPrints:`印刷を開始しています`,progressSummary:`{{complete}}/{{total}} 完了 • 処理中: {{processing}}`,expandDetails:`送信の詳細を表示`,collapseDetails:`送信の詳細を非表示`,awaitingPrinter:`プリンターを待機中…`,status:{processing:`処理中`,completed:`完了`,failed:`失敗`},failed:{generic:`送信に失敗しました`,upload_failed:`プリンターへのアップロードに失敗しました`,start_command_failed:`プリンターが開始コマンドを拒否しました`},dismiss:`閉じる`},pipelineRuns:{title:`パイプライン実行`,loading:`読み込み中…`,empty:`パイプラインの実行はまだありません。`,filter:{pipeline:`パイプライン`,status:`ステータス`,target:`対象`,all:`すべて`,allPipelines:`すべてのパイプライン`,allStatus:`すべてのステータス`,allTargets:`すべての対象`,clear:`フィルターをクリア`,noMatches:`現在のフィルターに一致する実行はありません。`},totalCount_one:`{{n}} 件の実行`,totalCount_other:`{{n}} 件の実行`,copies:`{{n}} 部`,failedCount:`{{n}} 失敗`,copyN:`コピー {{n}}`,retryFailed:`失敗を再試行`,retryOf:`#{{n}} の再試行`,pagination:`{{total}} 件中 {{start}}–{{end}}`,toast:{cancelled:`実行をキャンセルしました`,cancelFailed:`キャンセルに失敗しました`,retryStarted:`再試行を開始しました`,retryFailed:`再試行に失敗しました`,cleared:`{{n}} 件の実行を削除しました`,clearFailed:`削除に失敗しました`},clearLog:`ログをクリア`,clearConfirmTitle:`ログをクリアしますか？`,clearConfirmBody:`完了、失敗、キャンセル、部分的失敗のすべてのパイプライン実行を削除しますか？実行中のものは残ります。元に戻せません。`,clearConfirmAction:`クリア`,jobStatus:{pending:`保留中`,awaiting_printer:`プリンター待機中`,queued:`待機中`,printing:`印刷中`,completed:`完了`,failed:`失敗`,cancelled:`キャンセル`},cancelledByUser:`ユーザーによりキャンセル`},queue:{filamentShort:{rowBadge:`割り当てられたスプールのフィラメントが不足しています`,rowTooltip:`スケジューラーがこのアイテムをフラグしました。再生ボタンをクリックしてスロットごとの不足量を確認し、それでも印刷するか判断してください。`,confirmTitle:`フィラメント不足`,confirmIntro:`割り当てられたスプールでは少なくとも 1 つのスロットを賄えません。それでも印刷しますか？`,lineItem:`スロット {{slot}}：必要 {{required}} g、残り {{remaining}} g`,unknown:`不明`,printAnyway:`それでも印刷`},slicerAmsMapping:{rowBadge:`このプリンター用に保存されたAMSスロット`,rowTooltip:`このアーカイブには、スライサーが選択した正確なAMSスロットが、この項目の対象プリンター用に保存されています。そのプリンターでの再印刷では、タイプと色で照合し直す代わりにそれらのトレイを再利用できます。`},title:`印刷キュー`,subtitle:`印刷ジョブのスケジュールと管理`,editQueueItem:`キューアイテムを編集`,selectAllPlates:`全{{count}}プレートを選択`,deselectAll:`全て解除`,printQueued:`キューに追加しました`,printQueuedWillStartWhenIdle:`プリンターがアイドル状態になると開始します`,itemsQueued:`{{count}}件をキューに追加しました`,sending:`送信中...`,sendingProgress:`送信中 {{current}}/{{total}}...`,adding:`追加中...`,addingProgress:`追加中 {{current}}/{{total}}...`,savingProgress:`保存中 {{current}}/{{total}}...`,clearQueue:`キューをクリア`,clearHistory:`履歴をクリア`,emptyQueue:`キューは空です`,position:`順番`,scheduledTime:`予定時刻`,moveUp:`上に移動`,moveDown:`下に移動`,startNow:`今すぐ開始`,printingInProgress:`印刷中...`,viewArchive:`アーカイブを表示`,viewInFileManager:`ファイルマネージャーで表示`,itemCount:`{{count}}件`,itemCount_plural:`{{count}}件のアイテム`,dragToReorder:`ドラッグして並べ替え（ASAPのみ）`,reorderHint:`順番はASAPアイテムのみに影響します。スケジュール済みアイテムは設定時刻に実行されます。`,sjf:{label:`SJF`,tooltip:`短いジョブ優先 — スケジューラーが短い印刷を優先します`},addedBy:`{{name}} が追加`,nextInQueue:`次のキュー`,clearPlateSuccess:`プレートをクリアしました — 次の印刷の準備完了`,plateNumber:`プレート {{index}}`,quantity:`数量`,quantityHint:`{{count}}件のキューアイテムを作成`,plateQuantityLabel:`{{plate}} の実行回数`,plateQuantityTotal_one:`合計 {{count}} 回`,plateQuantityTotal_other:`合計 {{count}} 回`,batchOrders:{title:`バッチ注文`,emptyTitle:`バッチ注文はありません`,emptyDescription:`複数プレートのファイル、または同じプレートを複数回キューに入れると、注文がここに進捗とともに表示されます。`,filter:{active:`進行中`,completed:`完了`,cancelled:`キャンセル済み`,all:`すべて`},status:{active:`進行中`,completed:`完了`,cancelled:`キャンセル済み`},noTargets:`グループのみ`,noTargetsHint:`プレートごとの目標数が導入される前に作成されたため、目標ではなくキューに入れた実行を追跡します。`,dispatchRemaining:`残り{{count}}件をキューに追加`,dispatchPlate:`残りをキューに追加`,strandedPlate:`設定をコピーできる実行がありません`,strandedNotice:`未実行の {{owed}} 件のうち {{runs}} 件をキューに追加できません。このプレートには、設定をコピーできるキュー内または完了済みの実行が残っていません。ファイルからこのプレートを一度キューに追加するか、オーダーをキャンセルしてください。`,dispatched:`{{name}} の残りの実行をキューに追加しました`,plateProgress:`{{target}}件中{{completed}}件完了`,remaining:`残り{{count}}件`,failed:`{{count}}件失敗`,printing:`{{count}}件印刷中`,wholeFile:`ファイル全体`,due:`期限 {{date}}`,costSoFar:`これまで {{amount}}`,costRemaining:`(残り {{amount}})`},activeBatches:`アクティブなバッチ`,batchProgress:`{{total}}件中{{completed}}件完了`,cancelBatch:`残りをキャンセル`,batchCancelled:`残りのバッチアイテムをキャンセルしました`,cancelBatchConfirmTitle:`バッチをキャンセル`,cancelBatchConfirmMessage:`このオーダーを終了しますか？キューに残っている実行はキャンセルされ、未生産分の要求も止まります。`,batch:{defaultName:`バッチ`,label:`{{count}}件`,label_plural:`{{count}}件`,pendingCount:`{{count}}件待機中`,pendingCount_plural:`{{count}}件待機中`,expand:`バッチを展開`,collapse:`バッチを折りたたむ`,groupAsBatch:`バッチとしてグループ化…`,groupAsBatchDescription:`選択した{{count}}件をひとつの折りたたみ可能なバッチにまとめます。`,nameLabel:`バッチ名`,namePlaceholder:`例：金曜のプレゼント`,create:`バッチを作成`,ungroup:`グループ解除`,ungroupConfirmTitle:`バッチのグループを解除しますか？`,ungroupConfirmMessage:`アイテムはキューに残りますが、グループ化されなくなります。`,dragGroup:`グループをドラッグ`},tabs:{batches:`バッチ`,queue:`キュー`,history:`履歴`,timeline:`タイムライン`,pipelines:`パイプライン`},layout:{flatList:`リスト`,byPrinter:`プリンター別`,groupByPrinter:`プリンター別にグループ化`},history:{emptyTitle:`履歴はまだありません`,emptyDescription:`完了・キャンセル・失敗した印刷がここに表示されます。`,showMore:`さらに表示`,showingCount:`{{total}} 件中 {{shown}} 件を表示`},dragGhost:{multiCount:`{{count}}件`,batch:`{{name}}（{{count}}部）`,batch_plural:`{{name}}（{{count}}部）`},sections:{currentlyPrinting:`印刷中`,queued:`キュー中`,history:`履歴`},status:{pending:`待機中`,waiting:`待機中`,printing:`印刷中`,paused:`一時停止`,completed:`完了`,failed:`失敗`,skipped:`スキップ`,cancelled:`キャンセル済み`},summary:{printing:`印刷中`,queued:`キュー中`,totalTime:`キュー合計時間`,totalWeight:`キュー合計重量`,history:`履歴`},filter:{allPrinters:`すべてのプリンター`,unassigned:`未割当`,allStatus:`すべてのステータス`,allLocations:`すべてのロケーション`,any:`すべて`},sort:{byPosition:`順番で並べ替え`,byName:`名前で並べ替え`,byPrinter:`プリンターで並べ替え`,bySchedule:`スケジュールで並べ替え`,byDate:`日付で並べ替え`,ascendingOldest:`昇順（古い順）`,descendingNewest:`降順（新しい順）`},badges:{staged:`ステージ済み`,requiresPrevious:`前の成功が必要`,autoPowerOff:`自動電源オフ`,gcodeInjection:`G-code`},empty:{title:`スケジュールされた印刷はありません`,description:`アーカイブページのコンテキストメニューから「スケジュール」オプションを使用するか、ファイルをドラッグ＆ドロップして始めましょう。`},time:{etaIfStartedNow:`このジョブを今開始した場合の完了予定時刻`,whenFree:`プリンターが空き次第`,overdue:`期限超過`,now:`今すぐ`,lessThanMinute:`1分以内`,inMinutes:`{{count}}分後`,inHours:`{{count}}時間後`},actions:{startPrint:`印刷を開始`,stopPrint:`印刷を停止`,requeue:`再キュー`},bulkEdit:{title:`{{count}}件のアイテムを編集`,title_plural:`{{count}}件のアイテムを編集`,description:`変更した設定のみが選択されたアイテムに適用されます。`,printer:`プリンター`,noChange:`— 変更なし —`,queueOptions:`キューオプション`,staged:`ステージ済み`,autoPowerOff:`印刷後に自動電源オフ`,requirePrevious:`前の成功を必要とする`,gcodeInjection:`G-codeを挿入`,printOptions:`印刷オプション`,bedLevelling:`ベッドレベリング`,flowCalibration:`フローキャリブレーション`,vibrationCalibration:`振動キャリブレーション`,layerInspection:`第一層検査`,timelapse:`タイムラプス`,useAms:`AMS使用`,nozzleOffsetCali:`ノズルオフセットキャリブレーション`,applyChanges:`変更を適用`,selectAll:`すべて選択`,deselectAll:`すべて選択解除`,selected:`{{count}}件選択中`,editSelected:`選択を編集`,cancelSelected:`選択をキャンセル`},confirm:{cancelTitle:`スケジュール済み印刷をキャンセル`,cancelMessage:`「{{name}}」をキャンセルしますか？`,stopTitle:`印刷を停止`,stopMessage:`現在の印刷「{{name}}」を停止しますか？プリンター上の印刷ジョブがキャンセルされます。`,removeTitle:`履歴から削除`,removeMessage:`「{{name}}」をキュー履歴から削除しますか？`,clearHistoryTitle:`履歴をクリア`,clearHistoryMessage:`{{count}}件の履歴をすべて削除しますか？`,cancelButton:`印刷をキャンセル`,stopButton:`印刷を停止`,thisPrint:`この印刷`,thisItem:`このアイテム`},toast:{cancelled:`キャンセル済み`,cancelFailed:`アイテムのキャンセルに失敗しました`,removed:`キューアイテムを削除しました`,keptForOrder:`削除ではなくキャンセルしました: バッチオーダーがこのプレートを再度キューに追加できる唯一の実行です`,historyKeptForOrders:`バッチオーダーがまだ必要とする {{kept}} 件は残しました。`,removeFailed:`プロジェクトからのアーカイブ削除に失敗しました`,stopped:`印刷を停止しました`,stopFailed:`印刷の停止に失敗しました`,released:`印刷をキューにリリースしました`,startFailed:`印刷の開始に失敗しました`,reorderFailed:`キューの並べ替えに失敗しました`,historyCleared:`{{count}}件の履歴をクリアしました`,clearHistoryFailed:`履歴のクリアに失敗しました`,updateFailed:`アイテムの更新に失敗しました`,bulkCancelled:`{{count}}件のアイテムをキャンセルしました`,bulkCancelFailed:`アイテムのキャンセルに失敗しました`,batchCreated:`バッチ「{{name}}」を作成しました`,batchCreateFailed:`バッチの作成に失敗しました`,batchUngrouped:`{{count}}件のグループを解除しました`,batchUngroupFailed:`バッチのグループ解除に失敗しました`,resumedAfterFailure:`キューを再開しました — {{restored}}件のジョブを保留状態に戻しました`,resumeAfterFailureFailed:`キューの再開に失敗しました`},resumeAfterFailure:{banner:`{{printer}} は前回の印刷失敗によりブロックされています — {{count}}件のジョブをスキップしました`,bannerHint:`プリンターの問題を解決してから再開すると、スキップされたジョブを復元してブロックを解除できます。`,button:`失敗後に再開`,confirmTitle:`失敗後にキューを再開しますか？`,confirmMessage:`{{printer}} のスキップされた {{count}} 件のジョブを保留状態に戻し、前回の印刷ブロックを解除します。続行する前にプリンターが準備完了していることを確認してください。`},timeline:{listView:`リスト`,timelineView:`タイムライン`,unassigned:`未割当`,noData:`この日の予定された印刷はありません`,nothingCommitted:`この時間枠に確定したスケジュールはありません。手動開始のステージ済み項目、待機中の項目、アイドル状態のプリンターのASAPジョブは表示されません — 予定時刻を設定するか、ステージ済み項目をリリースすると表示されます。`,allDoneBy:`すべての印刷は {{time}} までに完了予定`,staged:`ステージング`,filterAll:`すべて表示`,filterPrinting:`印刷中`,filterQueued:`待機中`,time:{anyMoment:`まもなく`,minutesLeft:`残り{{minutes}}分`,hoursLeft:`残り{{hours}}時間`,hoursMinutesLeft:`残り{{hours}}時間{{minutes}}分`},day:{previous:`前日`,next:`翌日`,today:`今日`},window:{back12h:`12時間戻る`,forward12h:`12時間進む`,now:`現在`},printerColumnHeader:`プリンター`},permissions:{noStopPrint:`印刷を停止する権限がありません`,noStartPrint:`印刷を開始する権限がありません`,noEdit:`このキューアイテムを編集する権限がありません`,noCancel:`このキューアイテムをキャンセルする権限がありません`,noRequeue:`アイテムを再キューする権限がありません`,noRemove:`このキューアイテムを削除する権限がありません`,noClearHistory:`すべての履歴をクリアする権限がありません`,noEditItems:`キューアイテムを編集する権限がありません`,noCancelItems:`キューアイテムをキャンセルする権限がありません`}},stats:{title:`統計`,subtitle:`ウィジェットをドラッグして並べ替え。目のアイコンをクリックして非表示。`,overview:`概要`,totalPrints:`総印刷数`,successRate:`成功率`,totalPrintTime:`総印刷時間`,printTime:`印刷時間`,totalFilament:`総フィラメント使用量`,filamentUsed:`フィラメント使用量`,filamentCost:`フィラメントコスト`,totalCost:`総コスト`,energyUsed:`エネルギー使用量`,energyCost:`エネルギーコスト`,energyWarmingUpTooltip:`エネルギー追跡は毎時スナップショットを収集中です。選択範囲の前に少なくとも1つのスナップショットが存在すると、期間合計が正確になります。初期値は過小になる場合があります。`,averagePrintTime:`平均印刷時間`,printsPerDay:`1日あたりの印刷数`,byPrinter:`プリンター別`,printsByPrinter:`プリンター別印刷数`,byMaterial:`素材別`,byMonth:`月別`,last7Days:`過去7日間`,last30Days:`過去30日間`,last90Days:`過去90日間`,allTime:`全期間`,quickStats:`クイック統計`,printActivity:`印刷アクティビティ`,filamentTypes:`フィラメントタイプ`,filamentTrends:`フィラメントトレンド`,failureAnalysis:`失敗分析`,timeAccuracy:`時間精度`,successful:`成功`,failed:`失敗`,cancelled:`キャンセル`,perfectEstimate:`100% = 完全な推定`,noTimeAccuracyData:`時間精度データがありません`,noFilamentData:`フィラメントデータがありません`,noPrinterData:`プリンターデータがありません`,noPrintData:`印刷データがありません`,noPrintDataLast30Days:`過去30日間の印刷データがありません`,failureReasons:`失敗理由`,topFailureReasons:`主な失敗理由`,failedPrintsCount:`{{failed}} / {{total}} 件の印刷が失敗`,lastWeekRate:`先週: {{rate}}%`,resetLayout:`レイアウトをリセット`,recalculateCosts:`コストを再計算`,recalculateCostsHint:`現在のフィラメント価格ですべてのアーカイブコストを再計算`,exportStats:`統計をエクスポート`,exportAsCsv:`CSVでエクスポート`,exportAsExcel:`Excelでエクスポート`,hiddenCount:`{{count}}件非表示`,exportDownloaded:`エクスポートをダウンロードしました`,exportFailed:`エクスポートに失敗しました`,layoutReset:`レイアウトをリセットしました`,recalculatedCosts:`{{count}}件のアーカイブのコストを再計算しました`,recalculateFailed:`コストの再計算に失敗しました`,loadingStats:`統計を読み込み中...`,noPermissionResetLayout:`レイアウトをリセットする権限がありません`,noPermissionRecalculate:`コストを再計算する権限がありません`,noPrintDataInRange:`選択した期間にデータがありません`,periodFilament:`フィラメント使用量`,periodCost:`コスト`,avgPerPrint:`1印刷あたりの平均`,usageOverTime:`時間推移`,energyOverTime:`エネルギー使用量の推移`,filamentByWeight:`重量`,printDuration:`印刷時間分布`,printerUtilization:`プリンター稼働率`,filamentSuccess:`素材別成功率`,printHabits:`印刷習慣`,printTimeOfDay:`時間帯別プリント`,colorDistribution:`カラー分布`,noColorData:`カラーデータがありません`,records:`記録`,longestPrint:`最長プリント`,heaviestPrint:`最重プリント`,mostExpensivePrint:`最高額`,busiestDay:`最多プリント日`,successStreak:`連続成功`,streakPrint:`連続プリント`,streakPrints:`{{count}}連続プリント`,printerStats:`プリンター統計`,hours:`時間`,avgPrints:`平均印刷数`,noArchiveData:`印刷データがありません`,filamentByTime:`推移`,avgWeight:`平均重量`,avgTime:`平均時間`,filamentByPrints:`印刷数`,timeframe:{today:`今日`,"this-week":`今週`,"this-month":`今月`,"last-7":`過去7日間`,"last-30":`過去30日間`,"last-90":`過去90日間`,"this-year":`今年`,"all-time":`全期間`,custom:`カスタム`,from:`開始`,to:`終了`},allUsers:`全ユーザー`,noUser:`ユーザーなし（システム）`,filterByUser:`ユーザーでフィルター`},maintenance:{title:`メンテナンス`,overview:`概要`,allOk:`すべてのメンテナンスは最新です`,dueCount:`{{count}}件の期限到来`,dueCount_plural:`{{count}}件の期限到来`,warningCount:`{{count}}件の警告`,warningCount_plural:`{{count}}件の警告`,totalPrintTime:`総印刷時間`,nextMaintenance:`次回メンテナンス`,nothingDue:`予定なし`,tasks:`タスク`,lastPerformed:`前回実施日`,interval:`間隔`,hoursRemaining:`残り{{hours}}時間`,hoursOverdue:`{{hours}}時間超過`,markDone:`完了にする`,performMaintenance:`メンテナンスを実施`,history:`履歴`,noHistory:`メンテナンス履歴がありません`,editPrintHours:`印刷時間を編集`,currentHours:`現在の時間`,statusTab:`ステータス`,settingsTab:`設定`,overdueCount:`{{count}}件超過`,dueSoonCount:`{{count}}件まもなく期限`,dueSoon:`まもなく期限`,allGood:`問題なし`,overdueBy:`{{duration}}超過`,dueIn:`あと{{duration}}`,timeLeft:`残り{{duration}}`,day:`1日`,days:`{{count}} 日`,week:`1週間`,weeks:`{{count}}週間`,month:`1ヶ月`,months:`{{count}}ヶ月`,year:`1年`,maintenanceTypes:`メンテナンスタイプ`,maintenanceTypesDescription:`システムタイプとカスタムメンテナンスタスク`,addCustomType:`カスタムタイプを追加`,restoreDefaults:`デフォルトタスクを復元`,intervalType:`インターバルタイプ`,intervalValue:`間隔 ({{type}})`,icon:`アイコン`,documentationLink:`ドキュメントリンク（任意）`,assignToPrinters:`プリンターに割り当て`,selectAtLeastOnePrinter:`プリンターを1台以上選択してください`,addType:`タイプを追加`,custom:`カスタム`,printHours:`印刷時間`,calendarDays:`カレンダー日数`,exampleName:`例: HEPAフィルター交換`,viewDocumentation:`ドキュメントを表示`,timeBasedInterval:`時間ベースのインターバル`,intervalOverrides:`インターバルのオーバーライド`,intervalOverridesDescription:`特定のプリンターの間隔をカスタマイズ`,assignedToPrinters:`割り当て済みプリンター：`,noPrintersAssigned:`プリンター未割り当て`,addPrinterShort:`追加:`,printersAssignedClick:`{{count}}台のプリンターを割り当て済み - クリックして管理`,removeFromPrinter:`このプリンターから削除`,types:{lubricateCarbonRods:`カーボンロッドの潤滑`,lubricateRails:`リニアレールの潤滑`,cleanNozzle:`ノズル/ホットエンドの清掃`,checkBelts:`ベルト張力の確認`,cleanBuildPlate:`ビルドプレートの清掃`,checkExtruder:`エクストルーダーギアの確認`,checkCooling:`冷却ファンの確認`,generalInspection:`総合点検`,cleanCarbonRods:`カーボンロッドの清掃`,lubricateSteelRods:`スチールロッドの潤滑`,cleanSteelRods:`スチールロッドの清掃`,cleanLinearRails:`リニアレールの清掃`,checkPtfeTube:`PTFEチューブの確認`,replaceHepaFilter:`HEPAフィルター交換`,replaceCarbonFilter:`カーボンフィルター交換`,lubricateLeftNozzleRail:`左ノズルレールの潤滑`},maintenanceComplete:`メンテナンスを完了としてマークしました`,typeUpdated:`メンテナンスタイプを更新しました`,typeDeleted:`メンテナンスタイプを削除しました`,defaultsRestored:`デフォルトタスクを{{count}}件復元しました`,printHoursUpdated:`印刷時間を更新しました`,printerAssigned:`プリンターを割り当てました`,printerRemoved:`プリンターを削除しました`,deleteTypeConfirm:`「{{name}}」を削除しますか？`,deleteSystemTypeTitle:`デフォルトのメンテナンスタスクを削除しますか？`,deleteSystemTypeMessage:`デフォルトのメンテナンスタスク「{{name}}」を削除してもよろしいですか？`,noPermissionUpdate:`メンテナンス記録を更新する権限がありません`,noPermissionPerform:`メンテナンスを実行する権限がありません`,noPermissionEditTypes:`メンテナンスタイプを編集する権限がありません`,noPermissionDeleteTypes:`メンテナンスタイプを削除する権限がありません`,noPermissionEditHours:`メンテナンス時間を編集する権限がありません`,noPermissionRemovePrinter:`プリンターの割り当てを解除する権限がありません`,noPermissionAssignPrinter:`プリンターを割り当てる権限がありません`,noPermissionEditIntervals:`メンテナンス間隔を編集する権限がありません`,configureSettings:`メンテナンスタイプと間隔を設定`},settings:{sliceEngine:`スライスエンジン`,sliceEngineSidecar:`サーバーサイドカー`,sliceEngineSidecarHint:`スライスはサーバー上のスライサーサイドカーコンテナーで実行されます。`,sliceEngineBrowser:`ブラウザー内`,sliceEngineBrowserHint:`スライスはサーバーを介さず、このデバイス上で実行されます。`,title:`設定`,general:`一般`,tabs:{general:`一般`,smartPlugs:`スマートプラグ`,sensors:`センサー`,notifications:`通知`,queue:`ワークフロー`,queueDispatch:`キューとディスパッチ`,queuePipelines:`パイプライン`,filament:`フィラメント`,network:`ネットワーク`,apiKeys:`APIキー`,virtualPrinter:`仮想プリンター`,spoolbuddy:`SpoolBuddy`,failureDetection:`失敗検出`,users:`認証`,backup:`バックアップ`,emailAuth:`メール認証`,ldap:`LDAP`,twoFa:`二段階認証`,oidc:`SSO / OIDC`,security:`セキュリティ`},spoolbuddy:{infoTitle:`SpoolBuddy デバイス`,infoBody:`SpoolBuddy キオスクはハートビートにより自動的に登録されます。使用されなくなった場合や、デーモンのクラッシュにより古い重複が残った場合は、ここでデバイスの登録を解除してください。`,duplicatesTitle:`{{count}} 台のデバイスが登録されています`,duplicatesBody:`キオスク UI は最初に登録されたデバイスのみを使用します。クラッシュによる古い重複がある場合は登録解除してください。オンラインのデバイスは次回のハートビートで自動的に再登録されます。`,empty:`SpoolBuddy デバイスはまだ登録されていません。`,online:`オンライン`,offline:`オフライン`,unregister:`登録解除`,unregisterSuccess:`デバイスの登録を解除しました`,unregisterError:`デバイスの登録解除に失敗しました`,confirmTitle:`SpoolBuddy デバイスの登録を解除しますか？`,confirmBody:`「{{hostname}}」（{{deviceId}}）をデータベースから削除します。デバイスがオンラインの場合、次回のハートビートで自動的に再登録されます。`,ipAddress:`IPアドレス`,firmware:`ファームウェア`,lastSeen:`最終接続`,daemonUptime:`デーモン稼働時間`,systemUptime:`システム稼働時間`,never:`なし`,nfc:`NFC`,scale:`計量器`,cpuTemp:`CPU 温度`,cpuLoad:`CPU 負荷`,memory:`メモリ`,disk:`ディスク`,update:`アップデート`,updateConfirmTitle:`Spoolbuddyデーモンを更新しますか？`,updateConfirmBody:`"{{hostname}}"のソフトウェア更新を実行しますか？更新後にデーモンが再起動されます。`,restartBrowser:`ブラウザを再起動`,restartBrowserConfirmTitle:`キオスクブラウザを再起動しますか？`,restartBrowserConfirmBody:`"{{hostname}}"のキオスクブラウザを再起動しますか？画面が一時的に消えます。`,restartDaemon:`デーモンを再起動`,restartDaemonConfirmTitle:`Spoolbuddyデーモンを再起動しますか？`,restartDaemonConfirmBody:`"{{hostname}}"のSpoolbuddyデーモンを再起動しますか？デバイスが数秒間オフラインになります。`,reboot:`再起動`,rebootConfirmTitle:`デバイスを再起動しますか？`,rebootConfirmBody:`"{{hostname}}"を再起動しますか？デバイスは約1分間オフラインになります。`,shutdown:`シャットダウン`,shutdownConfirmTitle:`デバイスをシャットダウンしますか？`,shutdownConfirmBody:`"{{hostname}}"をシャットダウンしますか？再起動には物理的なアクセスが必要です。`,commandConfirm:`確認`,commandQueued:`コマンドをキューに追加しました`,commandError:`コマンドの送信に失敗しました`},ldap:{title:`LDAP認証`,enabledDesc:`LDAP認証が有効です`,disabledDesc:`LDAP認証が無効です`,disabledHint:`以下のLDAP設定を構成して保存し、有効にしてください。`,enabled:`LDAP認証を有効にしました`,disabled:`LDAP認証を無効にしました`,feature1:`LDAP資格情報でログインできます`,feature2:`ローカル管理者アカウントはフォールバックとして残ります`,feature3:`ログイン時にLDAPグループがBamBuddyグループにマッピングされます`,serverConfig:`LDAPサーバー設定`,serverUrl:`サーバーURL`,serverUrlHint:`標準はldap://、SSL接続はldaps://を使用`,security:`セキュリティ`,securityHint:`StartTLSはプレーン接続をTLSにアップグレードします。LDAPSは最初からTLSを使用します。`,bindDn:`バインドDN（サービスアカウント）`,bindPassword:`バインドパスワード`,searchBase:`検索ベースDN`,userFilter:`ユーザー検索フィルター`,userFilterHint:`{username}はログインユーザー名に置き換えられます。OpenLDAPの場合は(uid={username})を使用。`,advanced:`詳細設定`,autoProvision:`ユーザー自動作成`,autoProvisionHint:`初回LDAPログイン時にBamBuddyアカウントを自動作成`,defaultGroup:`デフォルトグループ`,defaultGroupNone:`— なし（フォールバックなし）—`,defaultGroupHint:`LDAPユーザーが認証されたがマッピングされたLDAPグループに属していない場合に割り当てられるフォールバックグループ。空欄の場合、マッピングされていないユーザーは権限なしのままになります。`,groupMapping:`グループマッピング（JSON）`,groupMappingHint:`LDAPグループDNをBamBuddyグループにマッピング。利用可能なグループ: `,testConnection:`接続テスト`,settingsSaved:`LDAP設定を保存しました`,errors:{serverRequired:`LDAPサーバーURLは必須です`,searchBaseRequired:`検索ベースDNは必須です`,enableAuthFirst:`先に認証を有効にしてください`,configureLdapFirst:`先にLDAP設定を保存してください`}},email:{smtpSettings:`SMTP設定`,smtpHost:`SMTPサーバー`,smtpPort:`SMTPポート`,security:`セキュリティ`,authentication:`認証`,username:`ユーザー名`,password:`パスワード`,fromEmail:`送信元メールアドレス`,fromName:`送信者名`,testConnection:`SMTP接続テスト`,testRecipient:`テスト受信者メール`,sendTest:`テストメール送信`,sending:`送信中...`,save:`設定を保存`,saving:`保存中...`,advancedAuth:`高度な認証`,advancedAuthEnabled:`高度な認証が有効です`,advancedAuthEnabledDesc:`メールベースのユーザー管理機能が有効になっています。新規ユーザーには自動生成されたパスワードがメールで送信され、ユーザーはパスワード忘れ機能でパスワードをリセットできます。`,advancedAuthDisabled:`高度な認証が無効です`,advancedAuthDisabledDesc:`高度な認証を有効にして、ユーザー管理のメールベース機能を有効化してください。`,enable:`有効にする`,disable:`無効にする`,feature1:`パスワードは自動生成され、新規ユーザーにメールで送信されます`,feature2:`ユーザーはユーザー名またはメールでログインできます`,feature3:`パスワード忘れ機能が利用可能です`,feature4:`管理者はメールでユーザーパスワードをリセットできます`,errors:{requiredFields:`すべての必須フィールドに入力してください`,usernameRequired:`認証が有効な場合、ユーザー名は必須です`,enterTestEmail:`テストメールアドレスを入力してください`,smtpServerAndEmail:`テストする前にSMTPサーバーと送信元メールを入力してください`,usernamePasswordRequired:`認証が有効な場合、ユーザー名とパスワードは必須です`,configureSmtpFirst:`最初にSMTP設定を構成してテストしてください`,enableAuthFirst:`メール関連機能をご利用いただくには、まず認証を有効にしてください。`},success:{settingsSaved:`SMTP設定を保存しました`},securityOptions:{starttls:`STARTTLS (ポート 587)`,ssl:`SSL/TLS (ポート 465)`,none:`なし (ポート 25)`},authOptions:{enabled:`有効`,disabled:`無効`}},appearance:`外観`,notifications:`通知`,smartPlugs:`スマートプラグ`,spoolman:`Spoolman`,updates:`アップデート`,language:`言語`,languageDescription:`表示言語を選択してください`,theme:`テーマ`,themeLight:`ライト`,themeDark:`ダーク`,themeSystem:`システム設定に従う`,defaultView:`デフォルト画面`,defaultViewDescription:`アプリ起動時に表示するページ`,checkForUpdates:`アップデートを確認`,autoUpdate:`自動アップデート`,currentVersion:`現在のバージョン`,latestVersion:`最新バージョン`,upToDate:`最新です`,updateAvailable:`アップデートあり`,notificationLanguage:`通知の言語`,notificationLanguageDescription:`プッシュ通知の言語`,bedCooledThreshold:`ベッド冷却しきい値`,bedCooledThresholdDescription:`印刷後にベッドが冷却されたと見なす温度`,userNotificationsEnabled:`ユーザー通知`,userNotificationsEnabledDescription:`ユーザー通知メニューと印刷ジョブイベントのメール通知を有効にします。高度な認証が必要です。`,userNotificationsDisabledHint:`ユーザー通知を使用するには高度な認証を有効にしてください。`,notificationProviders:`通知プロバイダー`,addProvider:`プロバイダーを追加`,editProvider:`プロバイダーを編集`,providerType:`プロバイダーの種類`,testNotification:`テスト通知`,testSuccess:`テスト通知を送信しました`,testFailed:`テスト通知の送信に失敗しました`,quietHours:`おやすみ時間`,quietHoursDescription:`この時間帯は通知を送信しません`,quietHoursStart:`開始`,quietHoursEnd:`終了`,events:{title:`通知イベント`,printStart:`印刷開始`,printComplete:`印刷完了`,printFailed:`印刷失敗`,printStopped:`印刷中止`,printProgress:`進捗マイルストーン`,printProgressDescription:`25%, 50%, 75%で通知`,printerOffline:`プリンターオフライン`,printerError:`プリンターエラー`,filamentLow:`フィラメント残量低下`,maintenanceDue:`メンテナンス期限`,maintenanceDueDescription:`メンテナンスが必要なときに通知`},smartPlug:{title:`スマートプラグ`,add:`スマートプラグを追加`,edit:`スマートプラグを編集`,name:`名前`,ipAddress:`IPアドレス`,linkedPrinter:`連携プリンター`,autoOn:`自動電源オン`,autoOnDescription:`印刷開始時に電源を入れる`,autoOff:`自動電源オフ`,autoOffDescription:`印刷完了後に電源を切る`,offDelay:`オフ遅延`,offDelayMinutes:`印刷後の待機時間（分）`,offDelayTemp:`ノズル温度が下回ったとき`,currentState:`現在の状態`,turnOn:`電源オン`,turnOff:`電源オフ`},filamentTracking:`フィラメント追跡`,filamentTrackingDesc:`フィラメントスプールの追跡方法を選択してください。内蔵インベントリまたは外部Spoolmanサーバーを使用できます。`,autoAddUnknownRfid:`不明なRFIDスプールを自動追加`,autoAddUnknownRfidDesc:`不明なRFIDタグのスプールが検出されたとき、自動的に在庫エントリを作成します。新しいスプールを事前に手動で登録している場合は、重複を避けるためにオフにしてください。`,filamentChecks:`フィラメントチェック`,disableFilamentWarnings:`フィラメント警告を無効化`,disableFilamentWarningsDesc:`印刷またはキュー追加時にフィラメント不足の警告を表示しない`,preferLowestFilament:`残量が少ないフィラメントを優先`,preferLowestFilamentDesc:`複数のスプールが一致する場合、残量が最も少ないものを使用します`,preferLowestFilamentBackupNote:`プリンタ側でAMSフィラメントバックアップが有効な場合のみ動作します。無効の場合、選択したスプールが切れても予備スプールに切り替えできません。`,trackingModeBuiltIn:`内蔵インベントリ`,trackingModeBuiltInDesc:`RFID自動検出と使用量追跡を含む`,trackingModeSpoolmanDesc:`外部フィラメント管理サーバー`,builtInFeatureRfid:`AMS内のBambu Lab RFIDスプールを自動検出`,builtInFeatureUsage:`プリントごとのフィラメント消費量を追跡`,builtInFeatureCatalog:`スプール、カラー、K値プロファイルを管理`,builtInFeatureThirdParty:`サードパーティ製スプールをインベントリスプールに割り当て可能`,amsSyncButton:`AMSから重量を同期`,amsSyncTitle:`AMSからスプール重量を同期`,amsSyncMessage:`接続されたプリンターの現在のAMS残量値で、すべてのインベントリスプール重量を上書きします。破損した重量データの復旧に使用してください。プリンターがオンラインである必要があります。`,amsSyncing:`同期中...`,amsSyncSuccess:`{{synced}}個のスプールを同期、{{skipped}}個をスキップ`,amsSyncError:`AMSからの重量同期に失敗しました`,spoolmanAmsSyncButton:`AMSからSpoolmanの重量を同期`,spoolmanAmsSyncTitle:`AMSからSpoolmanスプール重量を同期`,spoolmanAmsSyncMessage:`接続されたプリンターの現在のAMS残量値に基づいて、すべてのSpoolmanスプール重量を更新します。プリンターがオンラインである必要があります。`,spoolmanAmsSyncing:`同期中...`,spoolmanAmsSyncSuccess:`{{synced}}個のSpoolmanスプールを同期、{{skipped}}個をスキップ`,spoolmanAmsSyncError:`AMSからのSpoolman重量同期に失敗しました`,spoolmanAmsSyncErrorUnreachable:`同期失敗（Spoolmanに接続できません）`,spoolmanAmsSyncErrorNotConfigured:`同期失敗（Spoolmanが設定されていません）`,spoolmanNotConfigured:`Spoolmanが設定されていません`,spoolmanFilamentCatalogTitle:`Spoolmanフィラメントカタログ`,spoolmanFilamentCatalogDesc:`Spoolmanインスタンスのフィラメント名と風袋重量。名前とスプール重量はここで編集できます。その他の属性はSpoolmanで直接管理してください。`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`Spoolmanサーバーのurl（例：http://localhost:7912）`,spoolmanConnected:`接続中`,spoolmanDisconnected:`未接続`,status:`ステータス`,connect:`接続`,disconnect:`切断`,howSyncWorks:`同期の仕組み`,syncInfoRfidOnly:`RFIDを搭載した公式Bambu Labスプールのみ同期されます`,syncInfoAutoCreate:`新しいスプールは初回同期時にSpoolmanに自動作成されます`,syncInfoThirdPartySkipped:`Bambu Lab以外のスプール（サードパーティ、リフィル）はスキップされます`,linkingExistingSpools:`既存スプールのリンク`,linkingExistingSpoolsDesc:`既存のSpoolmanスプールをAMSにリンクするには、AMSスロットにカーソルを合わせて「Spoolmanにリンク」をクリックしてください。`,syncMode:`同期モード`,syncModeAuto:`自動`,syncModeManual:`手動のみ`,syncModeAutoDesc:`変更が検出されるとAMSデータが自動的に同期されます`,syncModeManualDesc:`手動でトリガーした場合のみ同期`,syncAmsData:`AMSデータを同期`,syncAmsDataDesc:`プリンターのAMSデータをSpoolmanに手動同期`,allPrinters:`全プリンター`,noDefaultPrinter:`デフォルトなし（毎回選択）`,sidebarOrder:`サイドバーの順序`,saveThumbnails:`サムネイルを保存`,captureFinishPhoto:`完了写真を撮影`,noPrintersConfigured:`プリンターが設定されていません`,archiveMode:{always:`常にアーカイブを作成`,never:`アーカイブを作成しない`,ask:`毎回確認`},checkForUpdatesLabel:`アップデートを確認`,checkPrinterFirmware:`プリンターファームウェアの確認`,includeBetaUpdates:`ベータ版を含める`,includeBetaUpdatesDesc:`アップデート確認時にベータ版およびプレリリース版を通知する`,localLogin:{disable:`ローカルのユーザー名／パスワードログインを無効化`,disableHint:`有効にすると、SSOプロバイダーのみでサインインできます。LDAPには影響しません。復旧用のパスを残すには、サーバーで BAMBUDDY_LOCAL_LOGIN=true を設定してください。`},enableRetry:`リトライを有効化`,homeAssistantDescription:`Home Assistantに接続してHA REST APIでスマートプラグを制御します。switch、light、input_booleanエンティティに対応しています。`,environmentManagedLabel:`(環境変数で管理)`,autoEnabledViaEnv:`環境変数により自動的に有効化されました`,urlFromEnvReadOnly:`HA_URL環境変数で設定された値（読み取り専用）`,tokenFromEnvReadOnly:`HA_TOKEN環境変数で設定された値（読み取り専用）`,mqttConnectedTo:`接続先:`,prometheusDescription:`プリンターデータをPrometheus形式で公開`,noSmartPlugsTitle:`スマートプラグが設定されていません`,noSmartPlugsDescription:`Tasmotaベースのスマートプラグを追加して、エネルギー消費を追跡し、電源制御を自動化します。`,noProvidersTitle:`プロバイダーが設定されていません`,noProvidersDescription:`アラートを受信するにはプロバイダーを追加してください。`,noTemplatesAvailable:`テンプレートがありません。バックエンドを再起動してデフォルトテンプレートを生成してください。`,apiPermissionView:`プリンターステータスとキューを表示`,apiPermissionEdit:`印刷キューにアイテムを追加・削除`,apiKeysEmptyTitle:`APIキーがありません`,apiKeysEmptyDescription:`外部サービスと連携するためのAPIキーを作成してください。`,noUsersFound:`ユーザーが見つかりません`,noGroupsFound:`グループが見つかりません`,noGroupsAvailable:`利用可能なグループがありません`,passwordsDoNotMatch:`パスワードが一致しません`,systemGroupWarning:`システムグループ名は変更できません`,authDisabledTitle:`認証が無効です`,authDisabledFeature1:`システムへのアクセスにログインを要求`,authDisabledFeature2:`グループベースの権限で複数ユーザーを作成`,authDisabledFeature3:`50以上のきめ細かな権限でアクセスを制御`,userHasCreated:`このユーザーは以下を作成しています：`,userItemsQuestion:`これらのアイテムをどうしますか？`,deleteUserConfirm:`このユーザーを削除してもよろしいですか？この操作は元に戻せません。`,actionCannotBeUndone:`この操作は元に戻せません`,addFirstSmartPlug:`最初のスマートプラグを追加`,providers:`プロバイダー`,log:`ログ`,testAll:`すべてテスト`,testResults:`テスト結果`,testPassedCount:`{{count}}件成功`,testFailedCount:`{{count}}件失敗`,messageTemplates:`メッセージテンプレート`,messageTemplatesDescription:`各イベントの通知メッセージをカスタマイズ。`,apiKeys:`APIキー`,apiKeysDescription:`外部連携やWebhook用のAPIキーを作成します。`,createKey:`キーを作成`,apiKeyCreated:`APIキーを作成しました`,apiKeyCopyWarning:`今すぐこのキーをコピーしてください - 再表示されません！`,useInApiBrowser:`APIブラウザーで使用`,apiKeyQrButton:`QRコード`,apiKeyQrTitle:`スキャンして設定`,apiKeyQrCaption:`モバイルアプリでスキャンして、このサーバーとAPIキーを追加します。`,apiKeyQrWarning:`秘密のAPIキーが含まれています。他人に見られる場所で共有・スクリーンショットしないでください。`,createNewApiKey:`新しいAPIキーを作成`,keyName:`キー名`,keyNamePlaceholder:`例: Home Assistant, OctoPrint`,readStatus:`ステータスの読み取り`,readStatusDescription:`プリンターのステータス、キュー、ライブラリ、アーカイブ、スライサーパイプラインを表示`,manageQueue:`キューの管理`,manageQueueDescription:`印刷キューへのアイテムの追加と削除。「ライブラリの管理」と併せてスライサーパイプラインを実行`,controlPrinter:`プリンターの制御`,controlPrinterDescription:`印刷の一時停止、再開、停止`,manageLibrary:`ライブラリの管理`,manageLibraryDescription:`ライブラリファイルのアップロード、名前変更、削除、スライス。MakerWorld からのモデルインポート。「キューの管理」と併せてスライサーパイプラインを実行。`,manageInventory:`在庫の管理`,manageInventoryDescription:`スプールと在庫レコードの作成、更新、削除。SpoolBuddy キオスク（NFC スキャン、はかり読み取り、キオスクのシステムコマンド）に必要です。`,manageMaintenance:`メンテナンスの管理`,manageMaintenanceDescription:`完了したメンテナンスの記録、カウンターのリセット、間隔の編集、メンテナンス種類カタログの管理。より広範なプリンター制御を許可することなく「ノズルをクリーニングした」を記録する Home Assistant オートメーションに適しています。`,manageArchives:`アーカイブの管理`,manageArchivesDescription:`古い印刷とその統計への寄与の削除を含む、印刷アーカイブの編集と削除。印刷履歴を整理するオートメーションに適しています。`,manageProjects:`プロジェクトの管理`,manageProjectsDescription:`プロジェクトの作成、更新、削除、およびプロジェクトへのアーカイブの追加。印刷をプロジェクトに整理するオートメーションに適しています。`,maintenanceBadge:`メンテナンス`,archivesBadge:`アーカイブ`,projectsBadge:`プロジェクト`,libraryBadge:`ライブラリ`,inventoryBadge:`在庫`,cloudAccess:`クラウドアクセスを許可`,cloudAccessDescription:`Bambu Cloudのプリセットとフィラメントを代わりに読み込みます。Bambu Cloudへのサインインが必要です。`,cloudBadge:`クラウド`,updateEnergyCost:`電気料金を更新`,updateEnergyCostDescription:`このキーが /settings/electricity-price に新しいkWhごとの電気料金をPOSTすることを許可。Home Assistantの動的料金自動化（Tibber、Octopusなど）に便利。これはAPIキーで書き込み可能な唯一の設定フィールドです。`,energyCostBadge:`電力`,legacyKey:`レガシー`,legacyKeyTooltip:`ユーザー所有以前に作成 - クラウドアクセスには再作成が必要`,unnamedKey:`名前なしキー`,lastUsed:`最終使用:`,read:`読み取り`,control:`制御`,createFirstKey:`最初のキーを作成`,webhookEndpoints:`Webhookエンドポイント`,webhookApiKeyHint:`X-API-KeyヘッダーでAPIキーを使用してください。`,webhook:{getAllStatus:`全プリンターステータスを取得`,getSpecificStatus:`特定のプリンターステータスを取得`,addToQueue:`印刷キューに追加`,pausePrint:`印刷を一時停止`,resumePrint:`印刷を再開`,stopPrint:`印刷を停止`},apiBrowser:`APIブラウザ`,apiBrowserDescription:`すべての利用可能なAPIエンドポイントを探索してテストします。`,apiKeyForTesting:`テスト用APIキー`,apiKeyPlaceholder:`CallMeBot APIキー`,apiKeyHint:`このキーはX-API-Keyヘッダーとしてリクエストに送信されます。`,deleteApiKeyTitle:`APIキーを削除`,deleteApiKeyMessage:`このAPIキーを削除してもよろしいですか？このキーを使用しているすべての連携が動作しなくなります。`,deleteKey:`キーを削除`,amsDisplayThresholds:`AMS表示しきい値`,amsThresholdsDescription:`AMS湿度と温度インジケーターの色しきい値を設定します。`,humidity:`湿度`,goodGreen:`良好（緑）≤`,fairOrange:`普通（オレンジ）≤`,aboveFairBad:`普通のしきい値以上は赤（悪い）で表示`,fairAlsoDryingThreshold:`このしきい値は自動乾燥のトリガーにも使用されます`,fairBelowDryingFloor:`自動乾燥ではこの値に到達できません。AMS はヒーター動作中に {{floor}}% 以上を示すため、各サイクルが終了してすぐに再開してしまいます。自動乾燥を使う場合は {{floor}}% より高く設定してください。`,temperature:`温度`,goodBlue:`良好（青）≤`,aboveFairHot:`普通のしきい値以上は赤（高温）で表示`,tempAlarmThreshold:`アラームのしきい値`,tempAlarmSeparateFromBand:`通知を出すのはアラームのしきい値だけです。良好・普通は表示の色分けのみに使われます。空欄にすると、これまでどおり普通のしきい値で発報します。`,tempAlarmMustBePositive:`0以下のしきい値は無視され、普通のしきい値で発報します。`,historyRetention:`履歴の保持`,keepSensorHistory:`センサー履歴の保持期間`,historyRetentionDescription:`古い湿度と温度データは自動的に削除されます`,defaultPrintOptions:`デフォルト印刷オプション`,defaultPrintOptionsDescription:`新しい印刷のデフォルト値を設定します。印刷ダイアログで個別に変更できます。`,defaultBedLevelling:`ベッドレベリング`,defaultBedLevellingDesc:`印刷前にベッドを自動レベリング`,defaultFlowCali:`フローキャリブレーション`,defaultFlowCaliDesc:`押出フローのキャリブレーション`,defaultVibrationCali:`振動キャリブレーション`,defaultVibrationCaliDesc:`リンギングアーティファクトを低減`,defaultLayerInspect:`第1層検査`,defaultLayerInspectDesc:`AIによる第1層の検査`,defaultTimelapse:`タイムラプス`,defaultTimelapseDesc:`タイムラプス動画を記録`,defaultNozzleOffsetCali:`ノズルオフセットキャリブレーション`,defaultNozzleOffsetCaliDesc:`エクストルーダー間のノズルオフセットを校正`,tempFanPresetsTitle:`温度・ファンプリセット`,tempFanPresetsDescription:`プリンターカードの温度およびファン速度ポップオーバーに表示されるクイック選択値をカスタマイズします。オフボタンは常に表示されます。`,tempFanPresetsNozzle:`ノズル温度`,tempFanPresetsBed:`ベッド温度`,tempFanPresetsChamber:`チャンバー温度`,tempFanPresetsFan:`ファン速度`,tempFanPresetsReset:`デフォルトにリセット`,concurrentUploadsTitle:`同時アップロード`,concurrentUploadsDescription:`キューが同時にファイルを送信できるプリンター数です。プリンターのファイル受信は遅く（大きな造形では数分かかることもあります）、各プリンターは順番を待ちます。台数の多い環境では、この値を上げることで、バッチ内の最後のプリンターが先行するすべての転送を待たずに済みます。ネットワークや Bambuddy ホストが並列転送に耐えられない場合は下げてください。`,concurrentUploadsLabel:`同時に送信するプリンター数`,concurrentUploadsHelp:`1 にすると 1 台ずつ送信します（従来の動作）。既定値は 4 です。`,staggeredStart:`段階的開始`,staggeredStartDescription:`複数プリンターのバッチ開始を段階的に行う際のデフォルトのグループサイズと間隔。プリントモーダルでバッチごとに上書き可能。`,preheatTitle:`プレヒート & ヒートソーク`,preheatDescription:`キュー内の各印刷を開始する前に、ベッド（および対応している場合はチャンバー）を加熱し、温度を保持します。エンジニアリング素材（PA、ABS）をチャンバー能動加熱のないプリンターで使う際に有効です。ソーク中はベッドの放射熱でチャンバーが温まります。ベッド目標温度は印刷ファイルから読み取られ、チャンバーの挙動はプリンター機種によって異なります。`,preheatEnabled:`プレヒート & ソークを有効化`,preheatEnabledDesc:`オフにすると、キュー内の印刷は即時開始されます。各キュー項目で印刷ごとに上書き可能です。`,preheatFilamentTargetsLabel:`フィラメント別チャンバー目標 (°C)`,preheatFilamentTargetsHint:`Bambuddyはロード済みのAMSスロット中で最も高い目標値を選びます。すべてのスロットが0となる印刷（PLA、PETG、TPU、PVA）は予熱を完全にスキップし、すぐに開始します。`,preheatFilamentTargetsReset:`デフォルトにリセット`,preheatFilamentTargetsDefaultRow:`その他 / 未登録`,preheatMaxWait:`最大待機時間（秒）`,preheatMaxWaitHelp:`ソークへ移行するまでのチャンバー加熱フェーズの上限。`,preheatSoak:`ソーク（秒）`,preheatSoakHelp:`目標到達後または最大待機経過後の保持時間。`,preheatHardwareTitle:`プリンター別の挙動:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1EはM141でチャンバーを能動加熱します。X1C/P2Sはチャンバー温度を取得しますが、加熱はベッド放射のみです。P1S/P1P/A1/A1 Miniにはチャンバーセンサーがなく、ソークタイマーのみが適用されます。`,preheatPerItemDesc:`この印刷を開始する前にベッドとチャンバーを加熱します。既定では設定 → ワークフローのグローバルトグルを使用します。`,preheatOverride_inherit:`継承`,preheatOverride_on:`オン`,preheatOverride_off:`オフ`,calibrationMode_off:`オフ`,calibrationMode_on:`オン`,calibrationMode_auto:`自動`,preheatTargetOverride:`チャンバー目標を上書き (°C、空欄でフィラメント既定値)`,preheatTargetOverrideHelp:`0 はチャンバーなしでベッドを加熱し、ソークを実行します。空欄のままにすると、チャンバーが不要な印刷は予熱を完全にスキップします。`,plateClear:`プレートクリア確認`,requirePlateClear:`プレートクリア確認を必須にする`,requirePlateClearDescription:`有効にすると、スケジューラーは完了したプリンターでキューの印刷を開始する前に、プリンターごとのプレートクリア確認を待ちます。無効にすると、プリンターカード上のプレート状態バッジと「プレートをクリア済みにする」ボタンも非表示になります。`,keepBedWarm:`印刷間ベッド温度維持`,keepBedWarmDesc:`プレートクリア確認待ち中、下記の保温温度でベッドを維持してチャンバーを温かく保ちます。次の印刷のベッド温度の方が高い場合はそちらを使用します。次の印刷がチャンバー加熱を必要とする場合のみ適用されます（ASA、ABS、PA、PC など）。プレートクリア確認が有効になっている必要があります。`,keepWarmBedTemp:`保温時のベッド温度 (°C)`,keepWarmBedTempHelp:`ベッドでチャンバーを加熱する場面で使用されます（保温中、および印刷ファイルにベッド温度が含まれない場合の予熱時）。印刷ファイルのベッド温度の方が高い場合は、常にそちらが優先されます。`,keepWarmMaxMinutes:`保温を終了するまでの時間（分）`,keepWarmMaxMinutesHelp:`この時間内にプレートが片付けられない場合、ヒーターは無期限に加熱を続けず停止します。`,gcodeInjection:`G-codeインジェクション`,gcodeInjectionDescription:`Farmloop、SwapMod、AutoClear、Printflow 3Dなどの自動印刷システム用に、印刷の開始と終了時にカスタムG-codeを挿入します。スニペットはプリンターモデルごとに設定し、キューアイテム��「G-codeを挿入」を有効にすると適用されます。`,gcodeInjectionNoPrinters:`プリンターが見つかりません。G-codeスニペットを設定するにはプリンターを追加してください。`,gcodeStartLabel:`開始G-code`,gcodeEndLabel:`終了G-code`,gcodeStartPlaceholder:`印刷開始前に挿入されるG-code...`,gcodeEndPlaceholder:`印刷終了後に追加されるG-code...`,staggerGroupSize:`グループサイズ`,staggerGroupSizeHelp:`グループあたり同時に開始するプリンター数`,staggerInterval:`間隔（分）`,staggerIntervalHelp:`各グループ開始までの遅延`,queueDrying:`自動乾燥`,queueDryingDescription:`キュー印刷の合間にプリンターがアイドル状態の時、AMSフィラメントを自動的に乾燥します。上記の湿度しきい値を使用します。`,queueDryingEnabled:`自動乾燥を有効にする`,queueDryingEnabledDescription:`プリンターがアイドル状態で湿度がしきい値を超えた場合、AMS乾燥を自動的に開始`,queueDryingBlock:`乾燥完了まで待機`,queueDryingBlockDescription:`乾燥が完了するまで印刷キューをブロックします。オフの場合、印刷が優先されます。`,ambientDryingEnabled:`常時乾燥`,ambientDryingEnabledDescription:`キューに関係なく、アイドル状態のプリンターで湿度がしきい値を超えた場合に自動的にフィラメントを乾燥。`,printDryingEnabled:`印刷中も乾燥を継続`,printDryingEnabledDescription:`対応ハードウェア（H2D、H2C、H2S、P2S、H2D Pro、X2D、X1C、A2L、最新ファームウェア）で印刷中も自動乾燥を継続します。スプール保護のため、乾燥温度はアイドル時のプリセットより自動的に5°C低く制限されます。`,dryingPresets:`乾燥プリセット`,dryingPresetsDescription:`フィラメントタイプごとの温度と時間。AMS 2 Proは低温、AMS-HTは高温に対応。`,dryingFilament:`フィラメント`,humidityThresholds:`湿度しきい値`,humidityThresholdsDescription:`フィラメントタイプごとの自動乾燥・アラームのトリガー湿度。同一AMSで混在の場合は最も低いしきい値を使用。`,humidityThresholdCol:`しきい値`,humidityThresholdDefault:`デフォルト（未知のタイプ）`,printModal:`印刷ダイアログ`,expandCustomMapping:`カスタムマッピングをデフォルトで展開`,expandCustomMappingDescription:`複数プリンターに印刷する際、プリンターごとのAMSマッピングを展開表示`,authentication:`認証`,authEnabledDescription:`ユーザー認証でインスタンスが保護されています`,authDisabledDescription:`認証を有効にして、ユーザーアカウントの作成、権限の管理、Bambuddyインスタンスのセキュリティを確保しましょう。`,authDisabledMessage:`認証を有効にして、ユーザーアカウントの作成、権限の管理、Bambuddyインスタンスのセキュリティを確保しましょう。`,enableAuthentication:`認証を有効にする`,currentUser:`現在のユーザー`,changePassword:`パスワードを変更`,admin:`管理者`,users:`ユーザー`,addUser:`ユーザーを追加`,groups:`グループ`,addGroup:`グループを追加`,system:`システム`,noDescription:`説明なし`,userCount:`{{count}}人のユーザー`,permissionCount:`{{count}}件の権限`,createUser:`ユーザーを作成`,username:`ユーザー名`,enterUsername:`ユーザー名を入力`,password:`パスワード`,enterPassword:`パスワードを入力`,passwordRequirements:`大文字、小文字、数字、特殊文字を各1文字以上含む8文字以上。`,confirmPassword:`パスワードの確認`,confirmPasswordPlaceholder:`パスワードを確認`,viewReleaseOnGitHub:`GitHubでリリースを表示`,turnAllPlugsOn:`すべてのプラグをオン`,turnAllPlugsOff:`すべてのプラグをオフ`,clearNotificationLogs:`通知ログをクリア`,clearLogsMessage:`30日以上前のすべての通知ログを完全に削除します。この操作は元に戻せません。`,clearLogs:`通知ログを削除`,resetUiPreferences:`UI設定をリセット`,resetUiPreferencesMessage:`すべてのUI設定をデフォルトにリセットします：サイドバー順序、テーマ、ダッシュボードレイアウト、表示モード、ソート設定。プリンター、アーカイブ、サーバー設定は影響を受けません。クリア後にページがリロードされます。`,resetPreferences:`設定をリセット`,deleteGroupTitle:`グループを削除`,deleteGroupMessage:`このグループを削除しますか？このグループのユーザーはこれらの権限を失います。`,deleteGroup:`グループを削除`,disableAuthenticationTitle:`認証を無効化`,disableAuthenticationMessage:`認証を無効にしますか？Bambuddyインスタンスにログインなしでアクセスできるようになります。ユーザーはデータベースに残りますが、認証は無効になります。`,disableAuthentication:`認証を無効化`,configureBambuddy:`Bambuddyを設定`,systemDefault:`システムデフォルト`,archiveSettings:`アーカイブ設定`,newWindow:`新しいウィンドウ`,embeddedOverlay:`埋め込みオーバーレイ`,preferredSlicer:`優先スライサー`,preferredSlicerDescription:`APIサイドカー経由のアプリ内スライス処理に使用するスライサー`,openInSlicerLabel:`スライサーで開く`,openInSlicerInherit:`APIスライサーと同じ`,openInSlicerDescription:`「スライサーで開く」ボタンが使用するデスクトップスライサー。継承するには「APIスライサーと同じ」のままにするか、ローカルで使用する別のスライサーを選択します。`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-devには、Bambu作成の3MFの多くをスライスできない既知のCLIバグがあります — 上流イシュー#12426（ペイント済みマルチエクストルーダーファイルでのsegfault）および#13386（パラメータ範囲の厳格検証拒否）を参照。上流の修正がリリースされるまで、Bambu Studioを推奨します。`,useSlicerApi:`スライサーAPIを使用`,useSlicerApiDescription:`オンの場合、「Slice」アクションはアプリ内スライサーモーダルを開き、slicer-APIサイドカーを呼び出します。オフ（デフォルト）の場合、URIスキーム経由でデスクトップスライサーに引き継がれます。`,slicerCard:`スライサー`,orcaslicerApiUrl:`OrcaSlicer sidecar URL`,bambuStudioApiUrl:`Bambu Studio sidecar URL`,slicerStallTimeout:`スライサー停止タイムアウト（分）`,slicerStallTimeoutDescription:`サイドカーからの進捗がこの時間なければスライスを中止します。進捗を報告し続ける重いモデルは、どれだけ時間がかかっても中断されません。進捗を報告しないサイドカーでは、この値が合計時間の上限になります。`,slicerApiUrlDescription:`slicer-APIサイドカーコンテナのURL。空のままにすると SLICER_API_URL / BAMBU_STUDIO_API_URL 環境変数のデフォルト値が使用されます。`,externalCameras:`外部カメラ`,costTracking:`コスト追跡`,printsOnly:`印刷のみ`,totalConsumption:`総消費量`,dataManagement:`データ管理`,storageUsage:`ストレージ使用量`,storageUsageDescription:`カテゴリ別のデータ使用量の内訳`,storageUsageTotal:`合計`,storageUsageErrors:`エラー`,storageUsageOtherBreakdown:`その他（静的アセット、スクリプト、設定ファイルを含む）`,storageUsageSystem:`システム`,storageUsageData:`データ`,storageUsageUnavailable:`ストレージ使用量情報は利用できません`,clearNotificationLogsDescription:`30日以上前の通知ログを削除`,resetUiPreferencesDescription:`サイドバー順序、テーマ、表示モード、レイアウト設定をリセット。プリンター、アーカイブ、設定は影響を受けません。`,enableHomeAssistant:`Home Assistantを有効化`,enableMqtt:`MQTTを有効化`,useTls:`TLSを使用`,enableMetricsEndpoint:`メトリクスエンドポイントを有効化`,availableMetrics:`利用可能なメトリクス`,billingEnabled:`課金を有効にする`,billingEnabledDescription:`ユーザーにプリント料金を請求し、財務機能を有効にします`,printerKillSwitch:`印刷の自動停止`,printerKillSwitchDescription:`承認されていない印刷を即座に停止する`,financeBudgetReset:`月次財務予算のリセット`,financeBudgetResetDay:`リセット日`,financeBudgetResetDayHelp:`短い月の場合、リセットは月の最終日を使用します。`,financeBudgetResetTimezone:`リセットタイムゾーン`,financeBudgetResetTimezoneHelp:`L'inizio della finestra di bilancio viene calcolato in questo fuso orario.`,rebuildLedger:`ウォレットレジャーを再構築`,rebuildLedgerStarted:`レジャー再構築が開始されました`,rebuildLedgerConfirmTitle:`ウォレットレジャーを再構築しますか?`,rebuildLedgerConfirmMessage:`これにより、ウォレットレジャーが再構築され、履歴残高値が修復されます。何をしているかを確認した時にのみこれを実行してください。`,rebuildLedgerInProgress:`再構築を開始中...`,editUser:`ユーザーを編集`,deleteUserTitle:`ユーザーを削除`,groupName:`グループ名`,leaveEmptyForAnonymous:`匿名の場合は空のまま`,leaveEmptyForNoAuth:`認証なしの場合は空のまま`,enterNewPassword:`新しいパスワードを入力`,confirmNewPassword:`新しいパスワードを確認`,enterGroupName:`グループ名を入力`,enterDescriptionOptional:`説明を入力（任意）`,enterCurrentPassword:`現在のパスワードを入力`,enterNewPasswordMin6:`新しいパスワードを入力（6文字以上）`,toast:{keyCopied:`キーをクリップボードにコピーしました`,copyFailed:`キーのコピーに失敗しました`,keyAddedToBrowser:`キーをAPIブラウザに追加しました`,clearLogsFailed:`ログの削除に失敗しました`,uiPreferencesReset:`UI設定をリセットしました。更新中...`,authDisabled:`認証を無効にしました`,authDisableFailed:`認証の無効化に失敗しました`,apiKeyCreated:`APIキーを作成しました`,apiKeyDeleted:`APIキーを削除しました`,userCreated:`ユーザーが正常に作成されました`,userUpdated:`ユーザーが正常に更新されました`,userDeleted:`ユーザーが正常に削除されました`,groupCreated:`グループを作成しました`,groupUpdated:`グループを更新しました`,groupDeleted:`グループを削除しました`,fillRequiredFields:`必須項目をすべて入力してください`,passwordsDoNotMatch:`パスワードが一致しません`,passwordTooShort:`パスワードは8文字以上必要です`,passwordNeedsUppercase:`パスワードには少なくとも1つの大文字を含める必要があります`,passwordNeedsLowercase:`パスワードには少なくとも1つの小文字を含める必要があります`,passwordNeedsDigit:`パスワードには少なくとも1つの数字を含める必要があります`,passwordNeedsSpecial:`パスワードには少なくとも1つの特殊文字を含める必要があります`,enterGroupName:`グループ名を入力`,settingsSaved:`設定を保存しました`,noPermissionUpdate:`設定を変更する権限がありません`,cameraSettingsSaved:`カメラ設定を保存しました`,enterCameraUrl:`カメラURLを入力してください`,passwordChanged:`パスワードが正常に変更されました`,connectionFailed:`接続失敗`,testFailed:`テスト通知の送信に失敗しました`,cameraConnected:`カメラ接続{{resolution}}`,cameraConnectedCoalesced:`カメラ接続{{resolution}}（実行中のキャプチャと共有）`},testConnection:`接続テスト`,catalog:{spoolCatalog:`スプールカタログ`,spoolCatalogDescription:`ブランド/タイプ別の空スプール重量。スプール追加時の自動重量検索に使用されます。`,searchCatalog:`カタログを検索...`,addNewEntry:`新しいエントリを追加`,namePlaceholder:`名前（例：Bambu Lab - プラスチック）`,weight:`重量`,type:`タイプ`,default:`デフォルト`,custom:`カスタム`,noMatch:`検索に一致するエントリがありません`,empty:`カタログにエントリがありません`,deleteEntry:`エントリを削除`,deleteConfirm:`「{{name}}」を削除してもよろしいですか？`,resetCatalog:`カタログをリセット`,resetConfirm:`カタログをデフォルトにリセットしますか？カスタムエントリはすべて削除されます。`,loadFailed:`スプールカタログの読み込みに失敗しました`,nameWeightRequired:`名前と重量は必須です`,entryAdded:`エントリを追加しました`,addFailed:`エントリの追加に失敗しました`,entryUpdated:`エントリを更新しました`,updateFailed:`エントリの更新に失敗しました`,entryDeleted:`エントリを削除しました`,deleteFailed:`エントリの削除に失敗しました`,resetSuccess:`カタログをデフォルトにリセットしました`,resetFailed:`カタログのリセットに失敗しました`,exported:`{{count}}件のエントリをエクスポートしました`,imported:`{{added}}件のエントリをインポートしました（{{skipped}}件スキップ）`,importFailed:`インポートに失敗しました：無効なJSON形式`,exportTooltip:`カタログをJSONにエクスポート`,importTooltip:`JSONからカタログをインポート`,resetTooltip:`デフォルトにリセット`,selectedCount:`{{count}}件選択中`,deleteSelected:`選択を削除`,bulkDeleteConfirm:`{{count}}件のエントリーを削除してもよろしいですか？`,bulkDeleted:`{{count}}件のエントリーを削除しました`,bulkDeleteFailed:`エントリーの削除に失敗しました`,material:`材料`,spoolWeight:`スプール重量`,color:`色`,updateSpoolWeight:`スプール重量を更新`,filamentUpdated:`フィラメントを更新しました`,filamentUpdateFailed:`フィラメントの更新に失敗しました`,filamentUpdateInvalid:`フィラメントデータが無効です`,keepExistingSpoolWeight:`既存スプールの旧重量を保持`,keepExistingSpoolWeightDesc:`このフィラメントタイプで既に作成されたスプールは旧風袋重量を保持します。新しいスプールは更新後の値を使用します。`,applyToAllSpools:`全スプールに適用`,applyToAllSpoolsDesc:`このフィラメントタイプの全重量計算に新しい風袋重量が即座に適用されます。`},colorCatalog:{title:`カラーカタログ`,description:`メーカー/素材別のフィラメントカラー。スプール追加時の自動カラー検索に使用されます。`,searchColors:`カラーを検索...`,allManufacturers:`すべてのメーカー`,addNewColor:`新しいカラーを追加`,manufacturer:`メーカー`,colorName:`カラー名`,hex:`16進数`,materialOptional:`素材（任意）`,showing:`{{total}}件中{{filtered}}件を表示`,noMatch:`検索に一致するカラーがありません`,empty:`カタログにカラーがありません`,deleteColor:`カラーを削除`,deleteConfirm:`「{{name}}」を削除してもよろしいですか？`,resetCatalog:`カラーカタログをリセット`,resetConfirm:`カタログをデフォルトにリセットしますか？カスタムカラーはすべて削除されます。`,sync:`同期`,starting:`開始中...`,syncTooltip:`FilamentColors.xyzから同期（2000+カラー）`,loadFailed:`カラーカタログの読み込みに失敗しました`,fieldsRequired:`メーカー、カラー名、Hexカラーは必須です`,colorAdded:`カラーを追加しました`,addFailed:`カラーの追加に失敗しました`,colorUpdated:`カラーを更新しました`,updateFailed:`カラーの更新に失敗しました`,colorDeleted:`カラーを削除しました`,deleteFailed:`カラーの削除に失敗しました`,resetSuccess:`カラーカタログをデフォルトにリセットしました`,resetFailed:`カタログのリセットに失敗しました`,syncUpToDate:`最新の状態です（{{count}}件のカラーを確認）`,syncComplete:`{{added}}件の新しいカラーを追加しました（{{skipped}}件は既に存在）`,syncError:`同期エラー`,syncFailed:`FilamentColors.xyzからの同期に失敗しました`,exported:`{{count}}件のカラーをエクスポートしました`,imported:`{{added}}件のカラーをインポートしました（{{skipped}}件スキップ）`,importFailed:`インポートに失敗しました：無効なJSON形式`,selectedCount:`{{count}}件選択中`,deleteSelected:`選択を削除`,bulkDeleteConfirm:`{{count}}件のカラーを削除してもよろしいですか？`,bulkDeleted:`{{count}}件のカラーを削除しました`,bulkDeleteFailed:`カラーの削除に失敗しました`},dateFormat:`日付形式`,dateFormatUs:`米国 (MM/DD/YYYY)`,dateFormatEu:`EU (DD/MM/YYYY)`,dateFormatIso:`ISO (YYYY-MM-DD)`,timeFormat:`時刻形式`,timeFormat12:`12時間制 (3:30 PM)`,timeFormat24:`24時間制 (15:30)`,defaultPrinter:`デフォルトプリンター`,defaultPrinterDescription:`アップロード、再印刷、その他の操作でこのプリンターを事前選択します。`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`サイドバーレイアウトで項目の並べ替え、表示状態のリセット、カスタムリンクの管理を行います。`,setDefault:`デフォルト設定`,sidebarOrderSetDefaultHint:`デフォルト設定は、まだカスタマイズしていないユーザーに現在のメニュー順序を適用します。`,sidebarDefaultSet:`デフォルトメニュー順序を設定しました。`,sidebarDefaultCleared:`デフォルトメニュー順序をクリアしました。`,sidebarDefaultFailed:`デフォルトメニュー順序の設定に失敗しました。`,reset:`リセット`,darkMode:`ダークモード`,lightMode:`ライトモード`,active:`(アクティブ)`,background:`背景`,accent:`アクセント`,style:`スタイル`,bgNeutral:`ニュートラル`,bgWarm:`ウォーム`,bgCool:`クール`,bgOled:`OLEDブラック`,bgSlate:`スレートブルー`,bgForest:`フォレストグリーン`,accentGreen:`グリーン`,accentTeal:`ティール`,accentBlue:`ブルー`,accentOrange:`オレンジ`,accentPurple:`パープル`,accentRed:`レッド`,styleClassic:`クラシック`,styleGlow:`グロー`,styleVibrant:`ビビッド`,themeToggleHint:`サイドバーのアイコンでダーク、ライト、システムモードを切り替えます。`,progressInTitle:`タブに印刷の進捗を表示`,progressInTitleDescription:`ブラウザのタブに進行中の印刷の進捗率と進捗リングを表示します。`,autoArchivePrints:`印刷を自動アーカイブ`,autoArchiveDescription:`印刷完了時に3MFファイルを自動保存`,saveThumbnailsDescription:`3MFファイルからプレビュー画像を抽出して保存`,captureFinishPhotoDescription:`印刷完了時にプリンターカメラから写真を撮影します。Bambuddy は印刷中に短いタイムラプスを記録し、ベッドが下がる前の瞬間から写真を取得できるようにします。この印刷でタイムラプスを有効にしていた場合はタイムラプスファイルが保存され、それ以外の場合は写真の取得後に自動的に削除されます。`,finishPhotoRestorePlate:`完了写真のためにプレートを戻す`,finishPhotoRestorePlateDescription:`プリンターは印刷終了時にビルドプレートを約 100 mm 下降させるため、完成した造形物がカメラの画角より下に来ます。Bambuddy はプレートを最終印刷レイヤーのすぐ上まで戻して写真を撮影し、その後再び下降させます。造形高さが不明な場合や次のジョブがキューにある場合はスキップされます。`,ffmpegNotInstalled:`ffmpegがインストールされていません`,ffmpegRequired:`カメラ撮影にはffmpegが必要です。<brew>brew install ffmpeg</brew>（macOS）または<apt>apt install ffmpeg</apt>（Linux）でインストールしてください。`,camera:`カメラ`,cameraViewMode:`カメラ表示モード`,cameraOverlayDescription:`メイン画面上にリサイズ可能なオーバーレイでカメラを表示`,cameraWindowDescription:`別のブラウザウィンドウでカメラを表示`,externalCamerasDescription:`内蔵プリンターカメラの代わりに外部カメラを設定。MJPEGストリーム、RTSP、HTTPスナップショット、USBカメラ（V4L2）をサポート。有効にすると、ライブビューと完了写真に外部カメラが使用されます。`,cameraPlaceholderUsb:`デバイスパス (/dev/video0)`,cameraPlaceholderUrl:`カメラURL (rtsp://... または http://...)`,cameraTypeMjpeg:`MJPEGストリーム`,cameraTypeRtsp:`RTSPストリーム`,cameraTypeSnapshot:`HTTPスナップショット`,cameraTypeUsb:`USBカメラ (V4L2)`,cameraSnapshotUrl:`スナップショットURL（任意）`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`通知サムネイル、終了写真、レイヤータイムラプスフレーム、プレート検出に使用される単一フレームURL。タイムラプスとプレート検出はそれぞれプリンターごとのトグルが必要 — このURLはアクティブ時の画像ソースに過ぎません。上記のライブストリームから取得する場合は空のままにします。go2rtc（/api/frame.jpeg）や専用スナップショットエンドポイントを持つIPカメラに便利です。`,cameraRotation:`回転`,test:`テスト`,connected:`接続済み`,disconnected:`未接続`,currency:`通貨`,defaultFilamentCost:`デフォルトフィラメントコスト（kg単価）`,electricityCost:`電気料金（kWh単価）`,energyDisplayMode:`エネルギー表示モード`,energyModePrintDescription:`ダッシュボードに印刷中の消費エネルギーの合計を表示`,energyModeTotalDescription:`ダッシュボードにスマートプラグの累計エネルギーを表示`,fileManager:`ファイルマネージャー`,createArchiveEntry:`印刷時にアーカイブエントリを作成`,createArchiveEntryDescription:`ファイルマネージャーから印刷時に、オプションでアーカイブエントリを作成`,lowDiskSpaceWarning:`ディスク容量不足の警告`,lowDiskSpaceDescription:`空きディスク容量がこのしきい値を下回った場合に警告を表示`,printerFirmware:`プリンターファームウェア`,checkFirmwareDescription:`Bambu Labのプリンターファームウェア更新を確認`,bambuddySoftware:`Bambuddyソフトウェア`,autoCheckDescription:`起動時に自動的に新しいバージョンを確認`,checkNow:`今すぐ確認`,updateAvailableVersion:`アップデート利用可能: v{{version}}`,releaseNotes:`リリースノート`,updateViaDocker:`Docker Composeでアップデート:`,composeDirectory:`Compose ディレクトリ`,composeDirectoryHint:`docker-compose.yml があるディレクトリ。空欄にすると cd を省略します。`,copyUpdateCommand:`更新コマンドをコピー`,updateViaHomeAssistant:`アップデートはHome Assistant Supervisorによって管理されます。Home Assistantの設定→アドオン→Bambuddyを開いて新しいバージョンをインストールしてください。`,updateViaWindowsInstaller:`Windowsインストールはインストーラーを再実行して更新します。下のリンクから新しいバージョンをダウンロードしてください — データ、設定、プリンターは保持されます。`,downloadWindowsInstaller:`v{{version}} のインストーラーをダウンロード`,installUpdate:`アップデートをインストール`,latestVersionRunning:`最新バージョンを使用しています`,failedToCheckUpdates:`アップデートの確認に失敗しました: {{error}}`,backupRestore:`バックアップと復元`,backupRestoreDescription:`設定のエクスポート/インポートとGitHubバックアップの設定`,goToBackup:`バックアップへ`,externalUrl:`外部URL`,externalUrlDescription:`Bambuddyがアクセス可能な外部URL。通知画像や外部連携に使用されます。`,bambuddyUrl:`BambuddyのURL`,externalUrlHint:`プロトコルとポートを含めてください（例: http://192.168.1.100:8000）`,ftpRetry:`FTPリトライ`,ftpRetryDescription:`プリンターのWi-Fiが不安定な場合にFTP操作をリトライ。3MFダウンロード、印刷アップロード、タイムラプスダウンロード、ファームウェア更新に適用。`,autoRetryDescription:`失敗したFTP操作を自動的にリトライ`,retryAttempts:`リトライ回数`,retryDelay:`リトライ遅延`,connectionTimeout:`接続タイムアウト`,time_one:`{{count}}回`,time_other:`{{count}}回`,second_one:`{{count}}秒`,second_other:`{{count}}秒`,nSeconds:`{{count}}秒`,increaseForWeakWifi:`Wi-Fiが弱いプリンター用に増やしてください`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Home Assistantに接続してHA REST API経由でスマートプラグを制御。switch、light、input_boolean、scriptエンティティをサポート。`,homeAssistantUrl:`Home Assistant URL`,longLivedAccessToken:`長期アクセストークン`,haTokenHint:`HAでトークンを作成: プロフィール → 長期アクセストークン → トークンを作成`,connectionSuccessful:`接続成功`,connectionFailed:`接続失敗`,haConnectionSuccess:`Home Assistantへの接続に成功しました。`,haConnectionFailed:`Home Assistantへの接続に失敗しました。`,mqttPublishing:`MQTTパブリッシュ`,mqttDescription:`Node-RED、Home Assistant、その他の自動化システムとの統合のため、外部MQTTブローカーにBamBuddyイベントをパブリッシュ。`,mqttEnableDescription:`外部MQTTブローカーにイベントをパブリッシュ`,brokerHostname:`ブローカーホスト名`,port:`ポート`,usernameOptional:`ユーザー名（オプション）`,passwordOptional:`パスワード（オプション）`,topicPrefix:`トピックプレフィックス`,topicPrefixHint:`トピック形式: {{prefix}}/printers/<serial>/status 等`,prometheusMetrics:`Prometheusメトリクス`,prometheusEndpointDescription:`Prometheus/Grafanaモニタリング用に<code>/api/v1/metrics</code>でプリンターメトリクスを公開。`,bearerTokenOptional:`Bearerトークン（オプション）`,bearerTokenHint:`設定時、リクエストに<code>Authorization: Bearer <token></code>が必要`,metricsConnectionStatus:`接続状態`,metricsPrinterState:`プリンター状態（idle/printing等）`,metricsPrintProgress:`印刷進捗 0-100%`,metricsBedTemp:`ベッド温度`,metricsNozzleTemp:`ノズル温度`,metricsPrintsTotal:`結果別の総印刷数`,metricsMore:`...その他（レイヤー、ファン、キュー、フィラメント使用量）`,smartPlugsDescription:`スマートプラグ（TasmotaまたはHome Assistant）を接続して、電源制御の自動化とプリンターのエネルギー使用量を追跡。`,allOn:`すべてオン`,allOff:`すべてオフ`,addSmartPlug:`スマートプラグを追加`,energySummary:`エネルギー概要`,currentPower:`現在の消費電力`,plugsOnline:`{{reachable}}/{{total}}プラグオンライン`,today:`今日`,yesterday:`昨日`,total:`合計`,enablePlugsForSummary:`プラグを有効にしてエネルギー概要を表示`,addNotificationProvider:`追加`,systemBadge:`(システム)`,creating:`作成中...`,changing:`変更中...`,deleteUserAndItems:`ユーザーとそのアイテムを削除`,deleteUserKeepItems:`ユーザーを削除、アイテムは保持（オーナーなしになります）`,ok:`OK`,twoFa:{totpTitle:`認証アプリ (TOTP)`,totpDesc:`Google Authenticator、Aegis、Authyなどのアプリを使用します。`,emailOtpTitle:`メールOTP`,emailOtpDesc:`ログイン時に{{email}}にワンタイムコードを送信します。`,emailOtpNoEmail:`この方法を有効にするには、アカウントにメールアドレスを追加してください。`,addEmailFirst:`アカウントにメールアドレスがありません。管理者に追加を依頼してください。`,setupTotp:`認証アプリを設定`,setupAuthApp:`認証アプリを設定`,setupInstructions:`認証アプリでQRコードをスキャンし、コードで確認してください。`,manualEntry:`スキャンできない場合は、このシークレットを手動で入力してください:`,scannedContinue:`コードをスキャンしました — 続ける`,enterCodeToConfirm:`認証アプリの6桁のコードを入力して設定を確認してください。`,activate:`有効化`,disableTotp:`認証アプリを無効化`,disableConfirmHint:`認証アプリを無効にするには、有効なTOTPコードまたはバックアップコードを入力してください。`,totpDisabled:`認証アプリが無効化されました。`,emailOtpEnabled:`メールOTPが有効化されました。`,emailOtpDisabled:`メールOTPが無効化されました。`,smtpRequired:`先にSMTP設定を構成してテストしてください。`,invalidCode:`無効なコードです。もう一度お試しください。`,enableEmailOtp:`メールOTPを有効化`,disableEmailOtp:`メールOTPを無効化`,emailSetupEnterCode:`確認コードがメールアドレスに送信されました。このメールボックスを所有していることを確認するために、以下に入力してください。`,verifyAndEnable:`確認して有効化`,emailDisablePasswordHint:`メールOTPの無効化を確認するには、アカウントのパスワードを入力してください。`,passwordPlaceholder:`パスワードを入力してください`,backupCodesTitle:`バックアップコードを保存`,backupCodesWarning:`これらのコードを安全な場所に保存してください。各コードは一度しか使用できません。`,backupCodesRemaining:`バックアップコード残り{{count}}個`,savedCodes:`コードを保存しました`,regenBackup:`バックアップコードを再生成`,regenBackupHint:`現在のTOTPコードを入力して10個の新しいバックアップコードを生成します。`,newBackupCodes:`新しいバックアップコード`,linkedAccounts:`リンクされたSSOアカウント`,linkedAccountsDesc:`これらの外部IDプロバイダーがあなたのアカウントにリンクされています。`,oidcUnlinked:`アカウントのリンクを解除しました。`},sessionPolicy:{title:`セッションポリシー`,description:`新しいユーザーログインの最大セッション有効期間。すでに発行されたトークンは元の有効期限を保持します。`,preset24h:`24時間`,preset7d:`7日`,preset30d:`30日`,customHoursLabel:`カスタムセッション有効期間（時間）`,hoursSuffix:`時間`,warning:`長いセッションは自動ログアウト保護を弱めます。信頼できる単一ユーザー環境でのみ推奨されます。`},oidc:{title:`SSO / OIDCプロバイダー`,desc:`シングルサインオン用のOpenID Connectプロバイダーを設定します。`,addProvider:`プロバイダーを追加`,newProvider:`新しいプロバイダー`,empty:`OIDCプロバイダーがまだ設定されていません。`,created:`プロバイダーが作成されました。`,updated:`プロバイダーが更新されました。`,deleted:`プロバイダーが削除されました。`,refreshIcon:`アイコンを再取得`,removeIcon:`アイコンを削除`,iconRefreshed:`アイコンを更新しました。`,iconRemoved:`アイコンを削除しました。`,iconFetchFailed:`プロバイダーURLからアイコンを取得できませんでした。`,deleteTitle:`プロバイダーを削除`,deleteMessage:`"{{name}}"を削除しますか？リンクされたすべてのユーザーアカウントが切断されます。`,form:{name:`表示名`,issuerUrl:`発行者URL`,clientId:`クライアントID`,clientSecret:`クライアントシークレット`,scopes:`スコープ`,iconUrl:`アイコンURL (任意)`,enabled:`有効`,autoCreate:`ユーザーを自動作成`,autoCreateDesc:`初回ログイン時にローカルアカウントを自動的に作成します。`,autoLink:`既存アカウントを自動リンク`,autoLinkDesc:`初回ログイン時にメールアドレスで既存のローカルアカウントにリンクします。`,secretHint:`空白のままで現在のものを維持`,secretPlaceholder:`新しいシークレット`,emailClaim:`メールクレーム`,emailClaimDesc:`メールIDとして使用するJWTクレーム。Azure Entra IDには'preferred_username'または'upn'を使用（email_verifiedを送信しない）。信頼できるクレーム名のみ使用してください。`,emailClaimPlaceholder:`メール`,emailClaimCustomClaimAutoLinkWarning:`カスタムクレームは、値がテナント管理されている場合（Azure Entra IDのupn / preferred_usernameなど）にのみ自動リンクに安全です。IdPがユーザーにこのクレームの自己宣言を許可している場合は、自動リンクを有効にしないでください。`,requireEmailVerified:`メール確認を要求`,requireEmailVerifiedDesc:`プロバイダーが確認済みとしてマークした場合にのみメールクレームを受け入れます。`,requireEmailVerifiedWarning:`警告：確認なしでメールが受け入れられます。信頼できるプロバイダーのみで使用してください。`,requireEmailVerifiedAutoLink:`この設定を変更するには、まず自動リンクを無効にしてください。`,defaultGroup:`デフォルトグループ`,defaultGroupDesc:`自動作成ユーザーに割り当てられるグループ。未設定の場合はViewersにフォールバックします。`,defaultGroupViewersFallback:`Viewers（デフォルト）`,autologin:`自動サインイン`,autologinDesc:`未認証の訪問者をこのプロバイダーに直接リダイレクトします。このフラグを付けられるプロバイダーは1つだけです。`}},encryption:{title:`MFA暗号化ステータス`,enabledFromEnv:`保存時の暗号化が有効（MFA_ENCRYPTION_KEY環境変数のキー）`,enabledFromFile:`保存時の暗号化が有効（データディレクトリから読み込んだキー）`,enabledGenerated:`保存時の暗号化が自動生成キーで有効`,notConfigured:`保存時の暗号化が設定されていません`,notConfiguredDesc:`TOTPシークレットとOIDCのclient_secretsは平文で保存されています。MFA_ENCRYPTION_KEYを設定するか、書き込み可能なデータディレクトリでBambuddyを再起動して自動生成してください。`,allEncrypted:`すべてのMFAシークレットは保存時に暗号化されています。`,legacyRowsLabel:`レガシー平文行`,encryptedRowsLabel:`暗号化された行`,legacyRowsWarning:`{{count}}件のレガシー平文行を検出。OIDCプロバイダーを再保存するか、ユーザーの認証アプリを再登録して暗号化ストレージへ移行してください。`,backupHint:`自動生成キーは DATA_DIR/.mfa_encryption_key に保存され、ローカルバックアップZIPに含まれます。バックアップを安全に保管するか、MFA_ENCRYPTION_KEYを明示的に設定してください。`,decryptionBrokenTitle:`暗号化キーが見つかりません`,decryptionBrokenError:`{{count}}件の暗号化レコードを復号できません。暗号化キーが見つかりません。以前のMFA_ENCRYPTION_KEYまたはDATA_DIR/.mfa_encryption_keyを復元してください。`,migrationErrorWarning:`{{count}} 件のレガシー行を起動時に再暗号化できませんでした。サーバーログを確認し、Bambuddy を再起動して再試行してください。`},pipelineLimits:{title:`スライサーパイプラインの上限`,maxCopiesLabel:`実行あたりの最大コピー数`,maxCopiesDesc:`パイプライン実行時にオペレーターが要求できるコピー数の上限。サーバー側の上限は 1000 です。`},pipelines:{title:`スライサーパイプライン`,subtitle:`再利用可能なプリセットバンドル（プリンター + プロセス + フィラメント + ベッドタイプ）。スライスダイアログから保存し、次のファイルにワンクリックで適用できます。`,loading:`パイプラインを読み込み中…`,loadError:`パイプラインを読み込めませんでした。`,confirmDelete:`このパイプラインを削除しますか？元に戻せません。`,staleWarning:`参照されているプリセットが見つかりません。スライスダイアログから再保存して修正してください。`,empty:{title:`パイプラインはまだありません。`,howto:`任意のファイルでスライスダイアログを開き、プリンター / プロセス / フィラメント / ベッドタイプを選んで「パイプラインとして保存」をクリックしてください。保存したパイプラインはここに表示されます。`},field:{name:`パイプライン名`,description:`説明`,targetPrinter:`対象プリンター`,noTarget:`— 対象なし —`,targetKind:`対象種別`,targetKindSpecific:`特定のプリンター`,targetKindClass:`プリンタークラス`,targetModelClass:`プリンターモデル`,fanoutStrategy:`分散戦略`,fanout:{max_parallel:`最大並列 — 一致する空きプリンターに分散`,round_robin:`ラウンドロビン — 適格なプリンター間で循環`,fill_one_first:`1台ずつ埋める — すべてのコピーを1台に固定`},fanoutShort:{max_parallel:`並列`,round_robin:`ラウンドロビン`,fill_one_first:`1台ずつ`}},action:{save:`保存`,cancel:`キャンセル`,rename:`名前変更`,delete:`削除`},slot:{printer:`プリンター`,process:`プロセス`,filament:`フィラメント`,filamentN:`フィラメント {{n}}`,filamentAll:`{{n}} スロットすべて`,bed:`ベッド`},group:{profiles:`プロファイル`,filaments:`フィラメント`},searchPlaceholder:`パイプラインを検索…`,filterTargetType:`対象種別でフィルター`,filterTarget:`対象でフィルター`,filter:{all:`すべての対象`,noTarget:`対象未設定`,count:`{{shown}} / {{total}}`,noMatches:`現在のフィルターに一致するパイプラインはありません。`},toast:{saved:`パイプラインを保存しました`,saveFailed:`保存に失敗しました`,deleted:`パイプラインを削除しました`,deleteFailed:`削除に失敗しました`},noTargetHint:`実行するには対象プリンターを設定してください`,noTargetWarning:`このパイプラインを実行する前に対象プリンターを設定してください。`,runs:{lastRun:`前回の実行`,status:{queued:`待機中`,slicing:`スライス中`,dispatching:`送信中`,in_progress:`印刷中`,completed:`完了`,failed:`失敗`,partial_failure:`部分的失敗`,cancelled:`キャンセル`}}}},notification:{printStarted:{title:`印刷開始`,body:`{{printer}}: {{filename}} の印刷を開始しました`},printCompleted:{title:`印刷完了`,body:`{{printer}}: {{filename}} が正常に完了しました`},printFailed:{title:`印刷失敗`,body:`{{printer}}: {{filename}} が失敗しました`},printStopped:{title:`印刷中止`,body:`{{printer}}: {{filename}} が中止されました`},printProgress:{title:`印刷進捗`,body:`{{printer}}: {{filename}} は {{percent}}% 完了`},printerOffline:{title:`プリンターオフライン`,body:`{{printer}} がオフラインです`},printerError:{title:`プリンターエラー`,body:`{{printer}} – {{error}}`},filamentLow:{title:`フィラメント残量低下`,body:`{{printer}}: フィラメントが残りわずかです`},maintenanceDue:{title:`メンテナンス期限`,body:`{{printer}}: {{items}} の対応が必要です`}},errors:{generic:`問題が発生しました`,networkError:`ネットワークエラーです。接続を確認してください。`,notFound:`見つかりません`,unauthorized:`認証エラー`,serverError:`サーバーエラー`,validationError:`入力内容を確認してください`,printerConnectionFailed:`プリンターへの接続に失敗しました`,saveFailed:`保存に失敗しました`,deleteFailed:`削除に失敗しました`,loadFailed:`データの読み込みに失敗しました`},hmsErrors:{title:`エラー - {{name}}`,noErrors:`エラーなし`,viewOnWiki:`Bambu Lab Wikiで表示`,mqttVerifyFailedRemedy:`プリンターで開発者モードを有効にし、プリンターを再起動してから、ジョブをもう一度開始してください。`,unknownCode:`不明なHMSコード — 詳細はBambu Lab Wikiを参照してください。`,clearInstructions:`プリンターでエラーをクリアするとここからも消えます。`,clearErrors:`エラーをクリア`,clearSuccess:`HMSエラーをクリアしました`,clearFailed:`HMSエラーのクリアに失敗しました`,actionSuccess:`アクションをプリンターに送信しました`,actionFailed:`アクションの送信に失敗しました`,runoutExpectedSlot:`{{ranOut}} のフィラメントが切れました。プリンターは現在 {{expected}} に対応するフィラメントを待っています。{{expected}} にスプールをセットして、「再試行」を選択してください。`,runoutExpectedSlotOnly:`プリンターは {{expected}} に対応するフィラメントを待っています。そこにスプールをセットして、「再試行」を選択してください。`,runoutSlotUnknown:`フィラメントが切れて印刷が一時停止しています。プリンターが現在要求しているスロットを Bambuddy が特定できませんでした。プリンターの画面で要求されているスロットを確認してください。`,actions:{RESUME_PRINTING:`印刷を再開`,RESUME_PRINTING_DEFECTS:`再開（不具合を許容）`,RESUME_PRINTING_PROBELM_SOLVED:`再開（問題解決）`,STOP_PRINTING:`印刷を停止`,CHECK_ASSISTANT:`アシスタントを開く`,FILAMENT_EXTRUDED:`フィラメント排出済み、続行`,RETRY_FILAMENT_EXTRUDED:`まだ排出されていない、再試行`,CONTINUE:`完了、続行`,LOAD_VIRTUAL_TRAY:`フィラメントを装填`,OK_BUTTON:`OK`,FILAMENT_LOAD_RESUME:`フィラメント装填完了、再開`,JUMP_TO_LIVEVIEW:`ライブビューを表示`,NO_REMINDER_NEXT_TIME:`次回は通知しない`,REFRESH_NOZZLE:`再確認`,IGNORE_NO_REMINDER_NEXT_TIME:`無視して次回は通知しない`,IGNORE_RESUME:`無視して再開`,PROBLEM_SOLVED_RESUME:`問題解決、再開`,TURN_OFF_FIRE_ALARM:`了解、火災警報をオフ`,RETRY_PROBLEM_SOLVED:`再試行（問題解決）`,CANCLE:`キャンセル`,STOP_DRYING:`乾燥を停止`,PROCEED:`続行`,OK_JUMP_RACK:`OK`,ABORT:`中止`,DISABLE_PURIFICATION:`この印刷では空気清浄を無効化`,DONT_REMIND_NEXT_TIME:`今後表示しない`,DBL_CHECK_CANCEL:`キャンセル`,DBL_CHECK_DONE:`完了`,DBL_CHECK_RETRY:`再試行`,DBL_CHECK_RESUME:`再開`,DBL_CHECK_OK:`確認`,REMOVE_CLOSE_BTN:`閉じる`}},mqttDebug:{title:`MQTTデバッグログ`,searchPlaceholder:`トピックまたはペイロードで検索...`,noMessages:`まだメッセージが記録されていません`,startLoggingHint:`「ログ開始」をクリックしてMQTTメッセージのキャプチャを開始`,noMessagesMatch:`フィルターに一致するメッセージがありません`,adjustFilterHint:`検索条件やフィルター条件を調整してみてください`,incoming:`受信`,outgoing:`送信`,loggingStopped:`ログ記録停止`,loggingActive:`ログ記録中 - メッセージは自動更新されます`,startLogging:`ログ記録を開始`,stopLogging:`ログ停止`,clearLog:`ログをクリア`,topic:`トピック`,timestamp:`タイムスタンプ`,direction:`方向`,all:`すべて`},printerFiles:{zipStarted_one:`{{count}} 個のファイルの ZIP ダウンロードを開始しました`,zipStarted_other:`{{count}} 個のファイルの ZIP ダウンロードを開始しました`,zipPartial:`{{total}} 個中 {{successful}} 個のファイルで ZIP ダウンロードを開始しました。残りは取得できませんでした`,downloadFailed:`ダウンロードに失敗しました: {{error}}`,unknownError:`不明なエラー`,shiftSelectHint:`Shift キーを押しながらクリックして範囲を選択`,selectFile:`{{name}} を選択`,deselectFile:`{{name}} の選択を解除`,title:`ファイル管理`,storageUsed:`使用中:`,storageFree:`空き:`,filterPlaceholder:`ファイルを検索...`,deleteButton:`削除`,deleteFiles:`{{count}}件のファイルを削除`,deleteFileConfirm:`"{{name}}" を削除しますか？この操作は取り消せません。`,deleteFilesConfirm:`選択した{{count}}件のファイルを削除しますか？元に戻せません。`,noFiles:`このディレクトリにファイルがありません`,printerUnavailable:`プリンターのファイルサービスを利用できません。プリンターに接続できる状態で再試行してください。`,loadingFiles:`ファイルを読み込み中...`,failedToLoad:`ファイルの読み込みに失敗しました`,toast:{filesDeleted:`{{count}}件のファイルを削除しました`,deleteFailed:`削除に失敗: {{error}}`}},confirm:{delete:`削除しますか？`,unsavedChanges:`保存されていない変更があります。このページを離れますか？`,clearQueue:`キューをクリアしますか？`},login:{title:`Bambuddy ログイン`,subtitle:`アカウントにサインイン`,username:`ユーザー名`,usernamePlaceholder:`ユーザー名を入力`,usernameOrEmail:`ユーザー名またはメール`,usernameOrEmailPlaceholder:`ユーザー名または @ メール`,password:`パスワード`,passwordPlaceholder:`パスワードを入力`,signIn:`サインイン`,signingIn:`ログイン中...`,rememberMe:`ログイン状態を保持する`,forgotPassword:`パスワードをお忘れですか？`,autologinFailed:`SSOへの自動サインインに失敗しました。下から続行するプロバイダーを選択してください。`,localDisabledNotice:`ローカルサインインは無効化されています。下のSSOプロバイダーをご利用ください。`,loginSuccess:`ログインしました`,loginFailed:`ログインに失敗しました`,enterCredentials:`ユーザー名とパスワードを入力してください`,enterEmail:`メールアドレスを入力してください`,oidcLoginFailed:`OIDCログインに失敗しました`,oidcErrors:{providerError:`IDプロバイダーがエラーを返しました`,missingParameters:`OIDCコールバックに必須パラメーターがありません`,invalidState:`OIDCの状態が無効か、すでに使用されています`,stateExpired:`OIDCログインセッションが期限切れです。もう一度お試しください`,providerNotFound:`OIDCプロバイダーが見つかりません`,discoveryFailed:`OIDCディスカバリードキュメントの取得に失敗しました`,invalidDiscovery:`OIDCディスカバリードキュメントが無効です`,networkError:`OIDCトークン交換中にネットワークエラーが発生しました`,badResponse:`OIDCトークン交換中に予期しない応答を受信しました`,noIdToken:`OIDCプロバイダーがIDトークンを返しませんでした`,validationFailed:`OIDCトークンの検証に失敗しました`,nonceMismatch:`OIDCノンスが一致しません。リプレイ攻撃の可能性があります`,missingSubClaim:`OIDCトークンにsubクレームがありません`,noLinkedAccount:`このOIDCアイデンティティに関連付けられたローカルアカウントがありません`,accountInactive:`あなたのアカウントは無効です`,userResolutionFailed:`アカウントを解決できませんでした`,internalError:`OIDCログイン中に内部エラーが発生しました`,tokenExchangeFailed:`OIDCトークン交換に失敗しました`},forgotPasswordTitle:`パスワードを忘れた場合`,forgotPasswordMessage:`パスワードを忘れた場合は、システム管理者に連絡してリセットしてもらってください。`,forgotPasswordEmailMessage:`メールアドレスを入力すると、新しいパスワードを送信します。`,emailAddress:`メールアドレス`,emailPlaceholder:`your.email@example.com`,cancel:`キャンセル`,sending:`送信中...`,sendResetEmail:`リセットメールを送信`,howToReset:`パスワードのリセット方法：`,resetStep1:`Bambuddy管理者に連絡`,resetStep2:`ユーザー管理でパスワードリセットを依頼`,resetStep3:`管理者が新しい仮パスワードを設定`,resetStep4:`新しいパスワードでログインし、設定で変更`,gotIt:`了解`,twoFA:{title:`二段階認証`,subtitle:`アカウントは二段階認証で保護されています。確認コードを入力してください。`,methodAuthenticator:`認証アプリ`,methodEmail:`メール認証`,methodBackup:`バックアップコード`,instructionsTotp:`認証アプリを開いて、Bambuddy用の6桁のコードを入力してください。`,instructionsEmail:`6桁の確認コードをメールアドレスに送信しました。有効期限は10分です。`,instructionsEmailNotSent:`下のボタンをクリックして、メールで確認コードを受け取ってください。`,instructionsBackup:`8文字のバックアップコードをいずれか1つ入力してください。各コードは1回のみ使用可能です。`,sendCodeButton:`メールでコードを送信する`,sendingCode:`送信中...`,resendCode:`コードを再送する`,codeLabel:`確認コード`,backupCodeLabel:`バックアップコード`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`確認する`,verifyingButton:`確認中...`,backToLogin:`← ログイン画面に戻る`,orContinueWith:`または以下でログイン`,signInWith:`{{provider}}でログイン`,enterCode:`確認コードを入力してください`,sendCodeFailed:`確認コードの送信に失敗しました`,invalidCode:`無効なコードです。もう一度お試しください。`},resetPassword:{title:`新しいパスワードを設定`,subtitle:`下のフィールドに新しいパスワードを入力して確認してください。`,newPassword:`新しいパスワード`,newPasswordPlaceholder:`8文字以上`,confirmPassword:`パスワードの確認`,confirmPasswordPlaceholder:`新しいパスワードを再入力`,saving:`保存中…`,submit:`新しいパスワードを設定`,backToLogin:`ログインに戻る`,passwordsDoNotMatch:`パスワードが一致しません`,passwordTooShort:`パスワードは8文字以上で入力してください`,resetFailed:`パスワードのリセットに失敗しました。リンクが期限切れの可能性があります。`}},setup:{title:`Bambuddy セットアップ`,subtitle:`Bambuddyインスタンスの認証を設定`,enableAuth:`認証を有効化`,adminAccount:`管理者アカウント`,adminAccountDesc:`既に管理者ユーザーが存在する場合、既存の管理者アカウントを使用して認証が有効化されます。既存の管理者を使用する場合は下のフィールドを空のままにするか、新しい認証情報を入力して新しい管理者ユーザーを作成してください。`,adminUsername:`管理者ユーザー名`,adminPassword:`管理者パスワード`,optionalIfAdminExists:`（管理者ユーザーが存在する場合は任意）`,adminUsernamePlaceholder:`管理者ユーザー名を入力（任意）`,adminPasswordPlaceholder:`管理者パスワードを入力（任意）`,confirmPassword:`パスワードの確認`,confirmPasswordPlaceholder:`パスワードを確認`,settingUp:`セットアップ中...`,completeSetup:`セットアップを完了`,toast:{authEnabledAdminCreated:`認証が有効になり、管理者ユーザーが作成されました`,authEnabledExistingAdmins:`既存の管理者ユーザーを使用して認証が有効になりました`,setupCompleted:`セットアップが完了しました`,enterBothCredentials:`管理者のユーザー名とパスワードの両方を入力するか、既存の管理者を使用する場合は両方を空にしてください`,passwordsDoNotMatch:`パスワードが一致しません`,passwordTooShort:`パスワードは6文字以上必要です`}},changePassword:{title:`パスワードを変更`,currentPassword:`現在のパスワード`,currentPasswordPlaceholder:`現在のパスワードを入力`,newPassword:`新しいパスワード`,newPasswordPlaceholder:`新しいパスワードを入力（6文字以上）`,confirmPassword:`新しいパスワード確認`,confirmPasswordPlaceholder:`パスワードを確認`,passwordsDoNotMatch:`パスワードが一致しません`,passwordTooShort:`パスワードは6文字以上必要です`,changing:`変更中...`,success:`パスワードを変更しました`,failed:`パスワードの変更に失敗しました`},plateAlert:{title:`印刷が一時停止されました！`,message:`ビルドプレート上にオブジェクトが検出されました。印刷が自動的に一時停止されました。プレートをクリアして印刷を再開してください。`,understand:`了解`},camera:{title:`カメラビュー`,invalidPrinterId:`無効なプリンターID`,live:`ライブ`,snapshot:`スナップショット`,restartStream:`ストリームを再開`,refreshSnapshot:`スナップショットを更新`,fullscreen:`フルスクリーン`,exitFullscreen:`フルスクリーンを終了`,connectingToCamera:`カメラに接続中...`,capturingSnapshot:`スナップショットを撮影中...`,connectionLost:`接続が切断されました`,connectionFailed:`カメラ接続に失敗しました`,reconnecting:`{{countdown}}秒後に再接続... (試行 {{attempt}}/{{max}})`,reconnectNow:`今すぐ再接続`,cameraUnavailable:`カメラが利用できません`,cameraUnavailableDesc:`プリンターの電源がオンで接続されていることを確認してください。`,noCamera:`カメラがありません`,retry:`再試行`,cameraStream:`カメラストリーム`,zoomOut:`ズームアウト`,zoomIn:`ズームイン`,resetZoom:`ズームをリセット`,recording:`録画中`,startRecording:`録画開始`,stopRecording:`録画停止`,chamberLight:`チャンバーライト切替`,unavailable:`カメラは利用できません`,diagnose:{button:`診断`,modalTitle:`カメラ診断`,running:`診断を実行中...`,runFailed:`診断を実行できませんでした: {{error}}`,retry:`再実行`,stage:{tcp_reachable:`ネットワーク到達性`,first_frame:`フレーム取得`,live_stream_active:`ライブストリーム動作中`},summary:{all_ok:`カメラは正常に動作しています。診断のすべての段階が成功しました。`,live_stream_active_healthy:`カメラは現在新しいフレームを配信しています — テストは不要です。`,printer_unreachable:`プリンターに到達できません。IPアドレス、ネットワーク接続、プリンターの電源が入っていることを確認してください。`,camera_port_closed:`プリンターには到達できますが、カメラポートが閉じています。プリンター設定でLANのみモードと開発者モードが有効になっていることを確認してください。`,no_frame:`カメラに接続できましたがフレームを受信できませんでした。再試行するか、プリンター設定でカメラが有効になっていることを確認してください。`,unknown_failure:`カメラ診断が不明な理由で失敗しました。詳細はサポートログを確認してください。`},meta:{protocol:`プロトコル`,port:`ポート`,profile:`プロファイル`}}},groups:{title:`グループ管理`,subtitle:`アクセス制御の権限グループを管理`,backToSettings:`設定に戻る`,createGroup:`グループを作成`,noPermission:`このページにアクセスする権限がありません。`,system:`システム`,noDescription:`説明なし`,usersCount:`{{count}}人のユーザー`,permissionsCount:`{{count}}個の権限`,edit:`編集`,delete:`削除`,toast:{created:`グループを作成しました`,updated:`グループを更新しました`,deleted:`アーカイブを削除しました`,enterGroupName:`グループ名を入力`},modal:{editGroup:`グループを編集`,createGroup:`グループを作成`,cancel:`キャンセル`,saving:`保存中...`,creating:`作成中...`,saveChanges:`変更を保存`},form:{groupName:`グループ名`,groupNamePlaceholder:`グループ名を入力`,systemGroupWarning:`システムグループ名は変更できません`,description:`説明`,descriptionPlaceholder:`説明を入力（任意）`,permissions:`権限 ({{count}} 選択中)`},deleteModal:{title:`グループを削除`,message:`このグループを削除しますか？このグループのユーザーはこれらの権限を失います。`,confirm:`確認`},editor:{title:`グループを編集`,createTitle:`グループを作成`,search:`権限を検索...`,selectAll:`すべて選択`,clearAll:`すべて解除`,permissionsSelected:`{{count}}件選択`,noResults:`検索に一致する権限がありません`,websocketHint:`ライブ更新に必要です。この権限がないと、インターフェースは定期的なポーリングに切り替わります。`}},users:{title:`ユーザー管理`,subtitle:`ユーザーとBambuddyインスタンスへのアクセスを管理`,backToSettings:`設定に戻る`,createUser:`ユーザーを作成`,noPermission:`このページにアクセスする権限がありません。`,admin:`管理者`,noGroups:`グループなし`,active:`アクティブ`,inactive:`非アクティブ`,edit:`編集`,delete:`削除`,system:`システム`,noGroupsAvailable:`利用可能なグループがありません`,table:{username:`ユーザー名`,groups:`グループ`,status:`ステータス`,actions:`アクション`},toast:{created:`ユーザーを作成しました`,updated:`ユーザーを更新しました`,deleted:`アーカイブを削除しました`,fillRequired:`必須項目をすべて入力してください`,passwordsDoNotMatch:`パスワードが一致しません`,passwordTooShort:`パスワードは6文字以上必要です`,ldapProvisioned:`LDAPユーザー「{{username}}」をプロビジョニング`},modal:{createUser:`ユーザーを作成`,editUser:`ユーザーを編集`,cancel:`キャンセル`,creating:`作成中...`,saving:`保存中...`,saveChanges:`変更を保存`,advancedAuthSubtitle:`高度な認証を使用`,tabsAriaLabel:`ユーザーソース`,localTab:`ローカル`,ldapTab:`LDAP`,ldapSearchLabel:`ディレクトリを検索`,ldapSearchPlaceholder:`ユーザー名、名前、またはメールアドレスを入力...`,ldapMinChars:`検索するには2文字以上入力してください`,ldapTypeToSearch:`LDAPディレクトリを検索するには入力を開始`,ldapSearching:`ディレクトリを検索中...`,ldapNoResults:`ディレクトリに一致するユーザーがいません`,ldapSearchError:`ディレクトリ検索に失敗。LDAPサーバーの状態を確認してください。`,ldapAlreadyProvisioned:`プロビジョニング済み`,ldapSelectedLabel:`選択中`,ldapProvision:`ユーザーをプロビジョニング`,ldapProvisioning:`プロビジョニング中...`,ldapErrorProvision:`プロビジョニングに失敗。LDAPサーバーの状態を確認して再試行してください。`},form:{username:`ユーザー名`,usernamePlaceholder:`ユーザー名を入力`,email:`メール`,emailPlaceholder:`user@example.com`,password:`パスワード`,passwordPlaceholder:`パスワードを入力`,confirmPassword:`パスワードの確認`,confirmPasswordPlaceholder:`パスワードを確認`,newPasswordPlaceholder:`新しいパスワードを入力`,confirmNewPasswordPlaceholder:`新しいパスワードを確認`,leaveBlankToKeep:`（現在のパスワードを維持する場合は空白）`,groups:`グループ`,optional:`オプション`,autoGeneratedPassword:`安全なパスワードが自動的に生成され、ユーザーにメールで送信されます。`,passwordManagedByAdvancedAuth:`パスワードは高度な認証によって管理されています。「パスワードのリセット」を使用して、メールで新しいパスワードをユーザーに送信してください。`,resetPassword:`パスワードのリセット`,resettingPassword:`パスワードをリセット中...`},deleteModal:{title:`ユーザーを削除`,message:`このユーザーを削除してもよろしいですか？この操作は元に戻せません。`,confirm:`ユーザーを削除`}},streamOverlay:{title:`ストリームオーバーレイ`,invalidPrinterId:`無効なプリンターID`,cameraStream:`カメラストリーム`,progress:`進捗`,eta:`残り時間`,printerIdle:`プリンター待機中`,printerOffline:`プリンターオフライン`,builder:{title:`ストリームオーバーレイ`,description:`ストリームオーバーレイのURLを作成します。全画面のカメラ映像に印刷中の情報を重ねて表示するもので、OBSや壁掛けディスプレイなどのブラウザソースで使えます。表示する項目を選んでURLをコピーしてください。`,printer:`プリンター`,size:`文字サイズ`,sizeSmall:`小`,sizeMedium:`中`,sizeLarge:`大`,fps:`フレームレート`,fpsHint:`A1およびP1のカメラは、指定した値にかかわらず毎秒5フレーム程度が上限です。`,token:`ストリームオーバーレイトークン（任意）`,tokenHint:`ログインを有効にしている場合のみ必要です。OBS自体はセッションを持ちません。上の欄でストリームオーバーレイのスコープを選んで作成してください。`,tokenWarning:`このURLにはトークンが含まれます。URLを読める人は誰でも映像とファイル名を見られます。アクセスを止めるにはトークンを失効させてください。`,fields:`表示する項目`,fieldPrinter:`プリンター名`,fieldFilename:`ファイル名`,fieldStatus:`ステータス`,fieldProgress:`進捗バー`,fieldLayers:`レイヤー数`,fieldEta:`残り時間と終了予定時刻`,fieldCamera:`カメラ映像`,chamberHint:`チャンバー温度は実際のセンサーを備えたモデルでのみ表示されます。P1およびA1は意味のない値を返すため除外されます。`,urlTitle:`オーバーレイURL`,open:`開く`,showPreview:`プレビューを表示`,hidePreview:`プレビューを非表示`,previewTitle:`オーバーレイのプレビュー`},status:{printing:`印刷中`,paused:`一時停止`,finished:`完了`,failed:`失敗`,idle:`待機中`,unknown:`不明`}},profiles:{title:`フィラメントプロファイル`,subtitle:`スライサープリセットと圧力キャリブレーションの管理`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`ローカルプロファイル`,kprofiles:`Kプロファイル`},orcaCloud:{connectedAs:`接続中`,connectedShort:`Orca Cloudに接続済み`,logout:`切断`,noLogoutPermission:`切断する権限がありません`,noConnectPermission:`Orca Cloudに接続する権限がありません`,retry:`再試行`,connectButton:`Orca Cloudに接続`,connect:{title:`Orca Cloudに接続`,description:`Orca Cloudアカウントにサインインして、スライサープロファイルをBambuddyに同期します。`},device:{title:`Orca CloudでBambuddyを承認`,instruction:`Orca Cloudを開いてこのコードを承認してください。承認するとBambuddyが自動的に接続されます。`,codeLabel:`ペアリングコード`,openButton:`Orca Cloud承認ページを開く`,manualHint:`または {{url}} にアクセスして、上記のコードを入力してください。`,waiting:`承認をお待ちしています…`,cancel:`キャンセル`},profiles:{title:`Orca Cloudプロファイル ({{count}})`,refresh:`更新`,empty:`Orca Cloudアカウントにまだプロファイルがありません。`},toast:{disconnected:`Orca Cloudから切断しました`},errors:{startFailed:`Orca Cloudのサインインを開始できませんでした。`,denied:`Orca Cloudでペアリングが拒否されました。`,expired:`ペアリングコードの有効期限が切れました。「接続」をクリックしてもう一度お試しください。`,pollFailed:`承認の待機中に接続が失われました。もう一度お試しください。`}},localProfiles:{title:`ローカルプロファイル`,subtitle:`OrcaSlicerからスライサープリセットをインポート・管理`,import:`プロファイルをインポート`,importDesc:`.bbscfg、.bbsflmt、.orca_filament、.zip、.jsonファイルをここにドロップ`,importing:`インポート中...`,search:`ローカルプリセットを検索...`,noPresets:`ローカルプリセットがまだありません`,noSearchResults:`検索に一致するプリセットがありません`,badge:`ローカル`,edit:`編集`,delete:`削除`,cancel:`キャンセル`,deleteConfirmTitle:`プリセットを削除`,deleteConfirm:`このプリセットを削除してもよろしいですか？元に戻せません。`,source:`ソース`,inheritsFrom:`継承元`,filamentType:`タイプ`,vendor:`メーカー`,compatiblePrinters:`プリンター`,nozzleTemp:`ノズル温度`,cost:`コスト`,density:`密度`,pressureAdvance:`プレッシャーアドバンス`,filament:`フィラメント`,process:`プロセス`,printer:`プリンター`,toast:{importSuccess:`{{count}}件のプリセットをインポートしました`,importSkipped:`{{count}}件のプリセットをスキップしました（重複）`,importError:`インポート中に{{count}}件のエラーが発生しました`,deleted:`プリセットを削除しました`,updated:`プリセットを更新しました`}},connectedAs:`接続中:`,signInExpiredTitle:`Bambu Cloud のサインインの有効期限が切れました`,signInExpiredBody:`保存されたトークンは Bambu Lab に受け付けられなくなりました。クラウドプロファイル、MakerWorld のインポート、ファームウェア確認を復元するには、再度サインインしてください。`,logout:`ログアウト`,noLogoutPermission:`ログアウトする権限がありません`,failedToLoad:`ファイルの読み込みに失敗しました`,retry:`リトライ`,time:{justNow:`たった今`,minsAgo:`{{count}}分前`,hoursAgo:`{{count}}時間前`,daysAgo:`{{count}}日前`},toast:{loggedOut:`ログアウトしました`},login:{title:`Bambuddy ログイン`,subtitle:`アカウントにサインイン`,email:`メールアドレス`,password:`パスワード`,region:`リージョン`,regionGlobal:`グローバル`,regionChina:`中国`,verificationCode:`認証コード`,totpCode:`認証アプリコード`,checkEmail:`メール ({{email}}) に届いた6桁のコードを入力してください`,enterTotpHint:`認証アプリの6桁のコードを入力してください`,accessToken:`アクセストークン`,accessTokenHint:`Bambu Cloud のアクセストークンを貼り付けてください。中国リージョンのアカウントはこの方法のみ利用可能です（電話番号認証のためメールログイン不可）。トークンの取得方法は MakerWorld の Cookie から（Wiki を参照）。`,back:`戻る`,loginButton:`ログイン`,verifyButton:`認証`,setTokenButton:`トークンを設定`,useToken:`アクセストークンを使用`,captchaTitle:`Bambu Cloud が CAPTCHA を要求しています`,captchaBody:`Bambu がサインインを受け付ける前にネットワークへ CAPTCHA を要求しており、この認証は Bambuddy からは応答できません。メールアドレスやパスワードの問題ではありません。ブロックはグローバル IP アドレスに紐づいており、通常は数時間で自動的に解除されます。繰り返し再試行すると解除が遅くなります。今すぐサインインするには、ブラウザーのセッションから取得したアクセストークンを使用してください。`,useEmail:`メールでログイン`,toast:{loggedIn:`ログインしました`,codeSent:`メールに認証コードを送信しました`,enterTotp:`認証アプリのコードを入力してください`,tokenSet:`トークンを設定しました`}},presets:{myPreset:`マイプリセット（編集可能）`,duplicate:`複製`,editable:`編集可能`,failedToLoadDetails:`プリセットの詳細を読み込めませんでした`,deleteConfirm:`このプロファイルを削除しますか？`,deleteWarning:`「{{name}}」をBambu Cloudから完全に削除します。元に戻せません。`,noDuplicatePermission:`プリセットを複製する権限がありません`,noEditPermission:`プリセットを編集する権限がありません`,noDeletePermission:`プロジェクトを削除する権限がありません`,types:{filament:`フィラメント`,printer:`プリンター`,process:`プロセス`},toast:{deleted:`アーカイブを削除しました`,created:`プリセットを作成しました`,updated:`プリセットを更新しました`,duplicated:`プリセットを複製しました`,fieldAdded:`フィールド "{{key}}" を追加しました`,exported:`プリセットをエクスポートしました`},baseLabel:`ベース: {{name}}`,currentLabel:`現在: {{name}}`,newPreset:`新規プリセット`,editPreset:`プリセットを編集`,duplicatePreset:`プリセットを複製`,createNewPreset:`新しいプリセットを作成`,customizeSettings:`新しいプリセットの設定をカスタマイズ`,compareWithBase:`ベースプリセットと比較`,compare:`比較`,basePreset:`ベースプリセット`,selectBasePreset:`ベースプリセットを選択...`,presetName:`プリセット名`,myCustomPreset:`カスタムプリセット`,inheritsFrom:`継承元:`,dropJsonToImport:`JSONファイルをドロップしてインポート`,tabs:{common:`一般`,allFields:`すべてのフィールド`},availableFields:`利用可能なフィールド`,searchFieldsPlaceholder:`フィールドを検索...`,noMatchingFields:`一致するフィールドがありません`,allFieldsAdded:`すべてのフィールドが追加済みです`,addCustomField:`カスタムフィールドを追加`,yourOverrides:`オーバーライド一覧`,noOverridesYet:`オーバーライドはまだありません`,clickFieldsToAdd:`左のフィールドをクリックして追加`,saveAsTemplate:`テンプレートとして保存`,jsonTip:`ヒント: .jsonファイルをこのモーダルにドラッグ＆ドロップして設定をインポート`},cloudView:{searchPlaceholder:`プリセットを検索...`,templates:`テンプレート`,refresh:`更新`,newPreset:`新規プリセット`,clearFilters:`フィルターをクリア`,compareMode:`比較モード`,selectAnotherPreset:`同じタイプ（{{type}}）の別のプリセットを選択`,clickTwoPresets:`同じタイプのプリセットを2つクリックして比較`,selectFirst:`1. 最初を選択`,selectSecond:`2. 2番目を選択`,compareNow:`比較を実行`,lastSynced:`最終同期:`,showingCount:`{{total}} 件中 {{showing}} 件のプリセットを表示`,noPresetsFound:`プリセットが見つかりません`,columns:{filament:`フィラメント`,process:`プロセス`,printer:`プリンター`},noFilamentPresets:`フィラメントプリセットなし`,noProcessPresets:`プロセスプリセットなし`,noPrinterPresets:`プリンタープリセットなし`,filters:{type:`種類`,owner:`所有者`,printer:`プリンター`,nozzle:`ノズル`,filament:`フィラメント`,layer:`レイヤー`,all:`すべて`,myPresets:`マイプリセット`,builtIn:`ビルトイン`,process:`プロセス`},noTemplatesPermission:`テンプレートを管理する権限がありません`,noRefreshPermission:`プロファイルを更新する権限がありません`,noCreatePermission:`プロジェクトを作成する権限がありません`},templates:{title:`フィラメントプロファイル`,noTemplates:`テンプレートがありません。バックエンドを再起動してデフォルトテンプレートを作成してください。`,createFirst:`プリセットエディタからテンプレートを作成`,typeFilter:`タイプ:`,deleteTitle:`テンプレートを削除`,deleteWarning:`この操作は元に戻せません`,deleteConfirm:`"{{name}}" を削除しますか？`,namePlaceholder:`テンプレート名`,descriptionPlaceholder:`説明`,settingsJson:`設定 (JSON)`,fieldsCount:`{{count}}フィールド`,shownInModals:`モーダルに表示`,hiddenInModals:`モーダルで非表示`,apply:`適用`,toast:{deleted:`アーカイブを削除しました`,updated:`テンプレートを更新しました`,created:`テンプレートを作成しました`,applied:`テンプレートを適用しました`}}},support:{debugLoggingActive:`デバッグログが有効です`,manageLogs:`管理`,collectItem7:`プリンター接続状態とファームウェアバージョン`,collectItem8:`連携状態（Spoolman、MQTT、HA）`,collectItem9:`ネットワークインターフェース（サブネットのみ）`,collectItem10:`Pythonパッケージバージョン`,collectItem11:`データベース健全性チェック`,collectItem12:`Docker環境の詳細`,bundleGenerating:`バンドルを生成中...`,bundleStepConnection:`プリンターの接続確認を実行中`,bundleStepVirtualPrinters:`仮想プリンターのセットアップ確認を実行中`,bundleStepLogScan:`最近のログから既知の問題をスキャン中`,bundleStepBuild:`サポートバンドル ZIP を作成中`},fileManager:{variants:{badge:`{{count}}個のバージョン`,groupAction:`バージョンとしてグループ化`,groupTooltip:`これらのファイルを、異なるプリンター向けにスライスした同一ジョブとして扱います`,grouped:`{{count}}個のファイルをバージョンとしてグループ化しました`,printAlternatives:`印刷（{{count}}件の候補）`},title:`ファイル管理`,subtitle:`印刷ファイルの整理と管理`,uploadFiles:`ファイルをアップロード`,newFolder:`新しいフォルダ`,folderName:`フォルダ名`,folderNamePlaceholder:`例: 機能パーツ`,renameFile:`ファイル名を変更`,renameFolder:`フォルダ名を変更`,invalidFilenameChar:`印刷ファイル名に "{{char}}" は使用できません。プリンターのSDカードは次の文字を拒否します: < > : " / \\ | ? *`,moveFiles:`{{count}}件のファイルを移動`,rootNoFolder:`ルート（フォルダなし）`,current:`（現在）`,linkFolder:`フォルダをリンク`,linkFolderDescription:`「{{name}}」をプロジェクトまたはアーカイブにリンクしてすばやくアクセス。`,project:`プロジェクト`,archive:`アーカイブ`,noProjectsFound:`プロジェクトが見つかりません`,noArchivesFound:`アーカイブが見つかりません`,unlink:`リンク解除`,link:`リンク`,dragDropFiles:`ファイルをここにドラッグ＆ドロップ`,dropFilesHere:`ここにファイルをドロップ`,releaseToUpload:`離してアップロード`,orClickToBrowse:`またはクリックして選択`,allFileTypesSupported:`すべてのファイルタイプに対応。ZIPファイルは展開されます。`,zipFilesDetected:`ZIPファイルを検出`,zipExtractOptions:`ZIPファイルは展開されます。フォルダー構造の処理方法を選択：`,preserveZipStructure:`ZIPのフォルダ構造を保持`,createFolderFromZip:`ZIPファイル名からフォルダーを作成`,stlThumbnailGeneration:`STLサムネイル生成`,zipMayContainStl:`ZIPファイルにSTLファイルが含まれている場合があります。展開時にサムネイルを生成できます。`,thumbnailsCanBeGenerated:`STLファイルのサムネイルを生成できます。大きなモデルは処理に時間がかかる場合があります。`,generateThumbnailsForStl:`STLファイルのサムネイルを生成`,threemfDetected:`3MFファイルを検出`,threemfExtractionInfo:`プリンターモデル、素材、色、印刷設定は3MFファイルから自動的に抽出されます。`,willBeExtracted:`• 展開予定`,filesExtracted:`• {{count}}個のファイルを展開済み`,uploadComplete:`アップロード完了: {{succeeded}} 件成功`,uploadFailed:`アップロード失敗`,zipFilesFailed:`{{count}}個のファイルが失敗`,uploading:`アップロード中...`,changeLink:`リンクを変更...`,linkTo:`リンク先...`,linkToProjectOrArchive:`プロジェクトまたはアーカイブにリンク`,generateThumbnail:`サムネイルを生成`,generateThumbnails:`サムネイルを生成`,generateThumbnailsForMissing:`サムネイルのないSTLファイルのサムネイルを生成`,gridView:`グリッド表示`,listView:`リスト表示`,lowDiskSpaceWarning:`ディスク容量不足の警告`,lowDiskSpaceDetails:`{{total}}中{{free}}の空き容量のみ。しきい値は設定で{{threshold}}GBに設定されています。`,files:`ファイル`,folders:`フォルダ`,size:`サイズ`,free:`空き:`,allFiles:`すべてのファイル`,allExternal:`外部`,externalIsEmpty:`外部ファイルはありません`,externalEmptyDescription:`リンクされた外部フォルダ内のファイルがここに表示されます。`,wrap:`折り返し`,enableTextWrapping:`テキスト折り返しを有効化`,disableTextWrapping:`テキスト折り返しを無効化`,collapse:`折りたたむ`,collapseFoldersByDefault:`フォルダをデフォルトで折りたたむ`,expandFoldersByDefault:`フォルダをデフォルトで展開する`,folderSort:`フォルダの並べ替え`,folderSortByName:`名前順`,folderSortByActivity:`最終更新順`,dragToResizeTooltip:`ドラッグしてリサイズ、ダブルクリックでリセット`,searchFiles:`ファイルを検索...`,searchSubfoldersHint:`サブフォルダーを含む`,readme:{truncated:`切り詰め`,show:`READMEを表示`,hide:`READMEを非表示`,label:`README`},tags:{title:`タグ`,subtitle:`ファイルに横断的なフィルタ用のラベルを付けます — おもちゃ、子ども向け、PETGのみ、など。`,manage:`タグ`,manageTitle:`タグカタログを管理`,add:`新しいタグ`,edit:`タグの名前を変更`,name:`名前`,fileCount:`ファイル数`,empty:`タグがまだありません。作成してファイルにラベル付けを始めましょう。`,noMatches:`一致するタグがありません。`,createPlaceholder:`例：おもちゃ、子ども向け、petg`,createButton:`作成`,nameRequired:`名前は必須です。`,searchPlaceholder:`タグを絞り込み...`,created:`タグを作成しました。`,updated:`タグの名前を変更しました。`,deleted:`タグを削除しました。`,saveFailed:`タグを保存できませんでした。`,deleteFailed:`タグを削除できませんでした。`,applyFailed:`タグを適用できませんでした。`,applyAdd:`タグを追加`,applyRemove:`タグを削除`,applyAddSuccess:`{{files}}個のファイルに{{count}}個のタグを追加しました。`,applyRemoveSuccess:`{{files}}個のファイルから{{count}}個のタグを削除しました。`,actionAdd:`選択したファイルに追加`,actionRemove:`選択したファイルから削除`,tagAction:`タグ付け`,bulkTitle:`選択した{{count}}個のファイルにタグ付け`,bulkTooltip:`選択したすべてのファイルでタグを追加・削除します。`,noPermission:`ファイルにタグを付ける権限がありません。`,filterLabel:`絞り込み:`,clearAll:`すべてクリア`,confirmDelete:`タグ「{{name}}」を削除しますか？`,confirmDeleteMessage:`カタログからタグを削除します。ファイル自体や他のタグはそのまま残ります。`,confirmDeleteInUseMessage:`このタグは{{count}}個のファイルに付いています。削除するとすべてのファイルからチップが消えますが、ファイル自体はそのままです。`,editAria:`{{name}}を編集`,deleteAria:`{{name}}を削除`},allTypes:`すべての種類`,prints:`印刷回数`,ascending:`昇順`,descending:`降順`,showModified:`更新日時を表示`,hideModified:`更新日時を非表示`,lastModified:`最終更新`,lastActivity:`最終アクティビティ`,resultsCount:`{{total}}件中{{showing}}件`,selectAll:`すべて選択`,deselectAll:`すべて選択解除`,selected:`{{count}}件選択中`,adding:`追加中...`,loadingFiles:`ファイルを読み込み中...`,folderIsEmpty:`フォルダーは空です`,noFilesYet:`ファイルはまだありません`,folderEmptyDescription:`ファイルをアップロードするか、このフォルダーにファイルを移動して開始しましょう。`,noFilesDescription:`印刷関連ファイルの整理を始めるにはファイルをアップロードしてください。`,noMatchingFiles:`一致するファイルがありません`,noMatchingFilesDescription:`現在の検索またはフィルター条件に一致するファイルがありません。`,clearFilters:`フィルターをクリア`,printedCount:`{{count}}回印刷済み`,uploadedBy:`アップロード者`,deleteFolder:`フォルダを削除`,deleteFile:`ファイルを削除`,deleteFilesCount:`{{count}}件のファイルを削除`,deleteFolderConfirm:`このフォルダを削除しますか？中のファイルもすべて削除されます。`,deleteFileConfirm:`このファイルを削除しますか？`,deleteFilesConfirm:`選択した{{count}}件のファイルを削除しますか？この操作は元に戻せません。`,deleting:`削除中...`,noPermissionRenameFolder:`フォルダー名を変更する権限がありません`,noPermissionLinkFolder:`フォルダーをリンクする権限がありません`,noPermissionDeleteFolder:`フォルダーを削除する権限がありません`,onlyEmptyFoldersDeletable:`空のフォルダーのみ削除できます`,noPermissionPrint:`印刷する権限がありません`,noPermissionSlice:`ファイルをスライスする権限がありません`,noPermissionAddToQueue:`キューに追加する権限がありません`,noPermissionDownload:`ファイルをダウンロードする権限がありません`,noPermissionPreview:`ファイルをプレビューする権限がありません`,preview3d:`3Dプレビュー`,noPermissionRenameFile:`このファイル名を変更する権限がありません`,noPermissionGenerateThumbnail:`サムネイルを生成する権限がありません`,noPermissionDeleteFile:`このファイルを削除する権限がありません`,noPermissionCreateFolder:`フォルダーを作成する権限がありません`,noPermissionUpload:`ファイルをアップロードする権限がありません`,noPermissionMoveFiles:`ファイルを移動する権限がありません`,noPermissionDeleteFiles:`ファイルを削除する権限がありません`,linkExternal:`外部リンク`,linkExternalFolder:`外部フォルダをリンク`,linkExternalFolderDescription:`ホストディレクトリ（NAS、USB、ネットワーク共有）をファイルマネージャにマウントします。ファイルはコピーされず、元のパスから直接アクセスされます。`,externalFolderNamePlaceholder:`例：NASプリント`,externalPath:`ホストパス`,externalPathHelp:`Dockerホスト上のディレクトリの絶対パス。コンテナにバインドマウントされている必要があります。`,readOnly:`読み取り専用`,readOnlyHelp:`アップロードと削除を防止`,showHiddenFiles:`隠しファイルを表示（ドットファイル）`,externalFolder:`外部フォルダ`,scanFolder:`スキャン`,toast:{folderCreated:`フォルダを作成しました`,openInSlicerFailed:`スライサーで開けませんでした`,folderDeleted:`フォルダを削除しました`,fileDeleted:`ファイルを削除しました`,filesDeleted:`{{count}}件のファイルを削除しました`,filesMoved:`ファイルを移動しました`,folderLinked:`フォルダをリンクしました`,folderUnlinked:`フォルダのリンクを解除しました`,externalFolderLinked:`外部フォルダがリンクされスキャンされました`,folderScanned:`スキャン完了：{{added}}件追加、{{removed}}件削除`,addedToQueue:`{{count}}個のファイルをキューに追加しました`,addedToQueuePartial:`{{added}}件追加、{{failed}}件失敗`,failedToAddToQueue:`ファイルの追加に失敗: {{error}}`,fileRenamed:`ファイル名を変更しました`,folderRenamed:`フォルダ名を変更しました`,thumbnailsGenerated:`{{count}}件のサムネイルを生成しました`,thumbnailsGeneratedPartial:`{{succeeded}}件生成、{{failed}}件失敗`,noStlMissingThumbnails:`サムネイルのないSTLファイルはありません`,failedToGenerateThumbnails:`サムネイルの生成に失敗: {{error}}`,thumbnailGenerated:`サムネイルを生成しました`,failedToGenerateThumbnail:`サムネイルの生成に失敗: {{error}}`}},projects:{parentLabel:`親プロジェクト`,parentNone:`なし（トップレベルプロジェクト）`,parentHint:`このプロジェクトを別のプロジェクトの下に配置すると、数値がマスタープロジェクトに集計されます`,partOf:`{{name}} の一部`,subProjectCount:`サブプロジェクト {{count}} 件`,subProjectsOf:`{{name}} のサブプロジェクト`,collapseSubProjects:`サブプロジェクトを折りたたむ`,expandSubProjects:`サブプロジェクトを展開`,title:`プロジェクト`,subtitle:`印刷プロジェクトを管理`,newProject:`新規プロジェクト`,editProject:`プロジェクトを編集`,deleteProject:`プロジェクトを削除`,projectName:`プロジェクト名`,description:`説明`,noProjects:`プロジェクトはまだありません`,noProjectsFiltered:`{{status}}のプロジェクトはありません`,noProjectsFilteredHelp:`{{status}}のプロジェクトがありません。ステータスが変更されるとここに表示されます。`,createFirst:`最初のプロジェクトを作成して、関連する印刷の整理、進捗管理、ビルドの管理を始めましょう。`,createFirstButton:`最初のプロジェクトを作成`,create:`作成`,files:`ファイル`,prints:`印刷`,plates:`プレート`,parts:`パーツ`,lastModified:`最終更新日`,deleteConfirm:`このプロジェクトを削除しますか？アーカイブとキューアイテムはリンク解除されますが、削除されません。`,addFiles:`ファイルを追加`,removeFile:`ファイルを削除`,viewDetails:`詳細を表示`,namePlaceholder:`プロジェクト名`,descriptionPlaceholder:`プロジェクトの説明（任意）`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URLはhttp://またはhttps://で始まる必要があります`,openExternalUrl:`プロジェクトのURLを開く`,coverImageLabel:`カバー画像`,coverImageAlt:`プロジェクトのカバー画像`,coverImageUpload:`アップロード`,coverImageReplace:`置き換える`,coverImageRemove:`削除`,color:`色`,targetPlates:`目標プレート数`,targetPlatesPlaceholder:`例: 10`,targetPlatesHelp:`印刷ジョブの数`,targetParts:`目標パーツ数`,targetPartsPlaceholder:`例: 50`,targetPartsHelp:`必要なオブジェクトの総数`,targetSets:`ファイルごとの部数`,targetSetsPlaceholder:`例: 10`,targetSetsHelp:`各印刷可能ファイルを印刷する回数`,tagsLabel:`タグ（カンマ区切り）`,tagsPlaceholder:`カンマ区切りのタグ`,dueDate:`期限`,priority:`優先度`,priorityLow:`低`,priorityNormal:`通常`,priorityHigh:`高`,priorityUrgent:`緊急`,statusActive:`進行中`,statusCompleted:`完了`,statusArchived:`アーカイブ済み`,done:`完了`,completed:`完了`,failed:`失敗`,inQueue:`キュー内`,noPrintsYet:`印刷履歴なし`,printJobs:`印刷ジョブ`,partsPrinted:`印刷済みパーツ`,failedParts:`失敗パーツ`,import:`インポート`,export:`エクスポート`,importProject:`プロジェクトをインポート`,exportAll:`すべてのプロジェクトをエクスポート`,loading:`プロジェクトを読み込み中...`,noEditPermission:`プロジェクトを編集する権限がありません`,noDeletePermission:`プロジェクトを削除する権限がありません`,noCreatePermission:`プロジェクトを作成する権限がありません`,noImportPermission:`プロジェクトをインポートする権限がありません`,noExportPermission:`プロジェクトをエクスポートする権限がありません`,toast:{created:`プロジェクトを作成しました`,updated:`プロジェクトを更新しました`,deleted:`アーカイブを削除しました`,imported:`プロジェクトをインポートしました`,multipleImported:`{{count}}件のプロジェクトをインポートしました`,importFailed:`インポートに失敗しました`,exported:`プロジェクトをエクスポートしました（メタデータのみ）`}},projectDetail:{notFound:`見つかりません`,backToProjects:`プロジェクト一覧に戻る`,export:`エクスポート`,exportProject:`プロジェクトをエクスポート`,noExportPermission:`プロジェクトをエクスポートする権限がありません`,noEditPermission:`このプロジェクトを編集する権限がありません`,partOf:`所属先`,priorityLabel:`優先度`,noPrints:`このプロジェクトにはまだ印刷がありません`,status:{active:`進行中`,completed:`完了`,archived:`アーカイブ済み`},priority:{low:`低`,normal:`通常`,high:`高`,urgent:`緊急`},dueDate:{overdue:`期限超過`,today:`今日が期限`,daysLeft:`残り{{count}}日`},progress:{platesProgress:`プレート進捗`,partsProgress:`パーツ進捗`,setsProgress:`完成セット`,sets:`セット`,setsHint:`すべての印刷可能ファイルがこの回数に達するとセットが完成します`,printJobs:`印刷ジョブ`,parts:`パーツ`,percentComplete:`{{percent}}% 完了`,remaining:`残り {{count}} 件`},stats:{printJobs:`印刷ジョブ`,total:`合計`,failed:`失敗 {{count}} 件`,partsPrinted:`印刷済みパーツ {{count}} 件`,printTime:`印刷時間`,filamentUsed:`フィラメント使用量`},cost:{title:`コスト追跡`,filamentCost:`フィラメント`,energy:`エネルギー`,totalCost:`合計コスト`,total:`合計`,includesBom:`BOM含む`,budget:`予算`,remaining:`残り`},subProjects:{title:`サブプロジェクト ({{count}})`,jobs:`ジョブ {{count}} 件`},rollup:{title:`サブプロジェクト {{count}} 件を含む`,progress:`全体の進捗`,percentComplete:`{{percent}}% 完了`},notes:{title:`メモ`,noEditPermission:`このプロジェクトを編集する権限がありません`,placeholder:`このプロジェクトについてメモを追加...`,empty:`<空>`},files:{title:`ファイル`,linkFolders:`ファイルマネージャーからフォルダーをリンク`,forQuickAccess:`してクイックアクセスできるようにします。`,fileCount:`{{count}}ファイル`,empty:`<空>`,printedCount:`{{count}}回印刷済み`,progressTooltip:`{{target}}回中{{done}}回の印刷が完了`,noFiles:`このフォルダにファイルはありません。`},bom:{title:`部品表`,acquired:`{{completed}}/{{total}} 取得済み`,showAll:`すべて表示`,hideDone:`完了を非表示`,addPart:`パーツを追加`,noAddPermission:`パーツを追加する権限がありません`,partNamePlaceholder:`パーツ名`,partName:`パーツ名`,qty:`数量`,price:`価格 ({{currency}})`,sourcingUrlPlaceholder:`URL（任意）`,remarksPlaceholder:`備考`,deletePart:`パーツを削除`,deleteConfirm:`「{{name}}」を削除しますか？`,noUpdatePermission:`パーツを更新する権限がありません`,noEditPermission:`このプロジェクトを編集する権限がありません`,noDeletePermission:`プロジェクトを削除する権限がありません`,totalCost:`合計コスト`,empty:`<空>`},timeline:{title:`アクティビティタイムライン`,empty:`<空>`},template:{saveAsTemplate:`テンプレートとして保存`,noCreatePermission:`プロジェクトを作成する権限がありません`},queue:{title:`印刷キュー`,viewAll:`すべて表示`,printing:`印刷中 {{count}} 件`,queued:`キュー内 {{count}} 件`},prints:{title:`印刷 ({{count}})`},toast:{projectUpdated:`プロジェクトを更新しました`,partAdded:`パーツを追加しました`,partRemoved:`パーツを削除しました`,exportFailed:`エクスポートに失敗しました`,projectExported:`プロジェクトがエクスポートされました`,templateCreated:`プロジェクトからテンプレートを作成しました`}},system:{title:`システム情報`,version:`バージョン`,uptime:`稼働時間`,cpuUsage:`CPU使用率`,memoryUsage:`メモリ使用量`,diskUsage:`ディスク使用量`,networkInfo:`ネットワーク情報`,logs:`ログ`,debugMode:`デバッグモード`,enableDebug:`デバッグログを有効化`,disableDebug:`デバッグログを無効化`,downloadLogs:`ログをダウンロード`,clearLogs:`通知ログを削除`,dockerInfo:`Docker情報`,containerName:`コンテナ名`,imageName:`イメージ名`,platform:`プラットフォーム`,architecture:`アーキテクチャ`},sponsors:{sectionTitle:`独立・コミュニティ運営`,tagline:`Bambuddyは無料で、これからも無料です。支援してくださる方々のおかげで、VCもクラウドロックインもありません。`,viewSupporters:`サポーター一覧`,toastPrints:`Bambuddyで{{count}}件の印刷を完了しました。Bambuddyは支援者のおかげで無料で提供されています。`,toastCost:`Bambuddyで{{total}}分のフィラメントを記録しました。プロジェクトを支えてくれている方々をご覧ください。`,toastArchives:`{{count}}件の印刷をBambuddyでアーカイブしました。独立を支えてくれている方々をご覧ください。`,toastAnniversary:`Bambuddyとの1周年です！プロジェクトを支えてくれている方々をご覧ください。`,toastVersionUpdate:`v{{version}}にアップデートされました。Bambuddyは支援者のおかげで無料で提供されています。`,toastBusiness:`{{count}}台のプリンターでBambuddyを運用中ですね。チーム向けのサポートプランがあります（優先対応、請求書発行、開発者への直接窓口）。`,businessCta:`ビジネス向けBambuddy`,businessTitle:`ビジネス向けBambuddy`,businessTagline:`{{count}}台のプリンターを運用中です。チームやプリントファーム向けに、優先サポート、商用ライセンス、請求書発行をご用意しています。`},library:{title:`フィラメントライブラリ`,addFilament:`フィラメントを追加`,editFilament:`フィラメントを編集`,deleteFilament:`フィラメントを削除`,vendor:`メーカー`,material:`素材`,color:`色`,kFactor:`K値`,temperature:`温度`,noFilaments:`ライブラリにフィラメントがありません`,deleteConfirm:`このフィラメントを削除しますか？`,importFromPrinter:`プリンターからインポート`,exportToFile:`ファイルにエクスポート`,runWithPipeline:{actionLabel:`パイプラインで実行`,noPermission:`パイプラインを実行する権限がありません`,modalTitle:`パイプラインで実行`,confirmTitle:`実行を確認`,confirmIntro:`プリフライトでこの実行に関する問題が見つかりました`,sourceHint:`ソース`,pipelineHint:`パイプライン`,targetHint:`対象`,pipelineListAria:`利用可能なパイプライン`,runAnyway:`とにかく実行`,loading:`読み込み中…`,empty:`保存されたパイプラインはまだありません。スライスダイアログを開き「パイプラインとして保存」をクリックして作成してください。`,noTarget:`対象プリンターが未設定`,noTargetMessage:`このパイプラインには対象プリンターが設定されていません。設定で開いて選択してください。`,copies:`コピー数`,copiesHint:`最大 {{n}}`,classTarget:`任意の {{model}}`,toast:{started:`パイプラインの実行を開始しました`,failed:`実行を開始できませんでした`},issue:{printerNotSet:`このパイプラインに対象プリンターが設定されていません。`,printerNotFound:`対象プリンターが存在しません。`,printerDisabled:`対象プリンターは無効です。`,printerOffline:`対象プリンターはオフラインです。`,filamentType:`フィラメントスロット {{slot}}: 期待 {{expected}}、AMS は {{actual}}`,filamentColor:`フィラメントスロット {{slot}}: 色が異なります（期待 {{expected}}、AMS は {{actual}}）`,amsSlotMissing:`AMS スロット {{slot}} はこのプリンターで利用できません`,filamentUnverified:`フィラメントスロット {{slot}} はクラウド／標準プリセットからのため、静的に検証できませんでした。`,noClassMatches:`このインストール内に、パイプラインの対象モデルクラス（{{expected}}）と一致するプリンターがありません。`,classNotSet:`パイプラインの対象がプリンタークラスに設定されていますが、モデルが選択されていません。`}}},slicerSettings:{presetValuesOutdatedSidecar:`スライサーの既定値を表示しています。スライサーサイドカーがこの機能より古く、プリセットの値を取得できません。値を表示するにはサイドカーのイメージを更新してください。変更しない項目は引き続きプリセットの値が使われます。`,presetValuesNotConfigured:`スライサーの既定値を表示しています。スライサーサイドカーが設定されていないため、プリセットの値を読み取れません。変更しない項目は引き続きプリセットの値が使われます。`,presetValuesSidecarUnavailable:`スライサーの既定値を表示しています。スライサーサイドカーが応答しなかったため、プリセットの値を読み取れません。変更しない項目は引き続きプリセットの値が使われます。`,presetValuesUnavailable:`スライサーの既定値を表示しています。選択したプリセットの値を読み取れませんでした。変更しない項目は引き続きプリセットの値が使われます。`,filamentDefault:`既定`,fromFile:`ファイル由来`,fromFileHint:`この項目は元ファイルで設計者が変更しています。値は {{value}} です。`,fromFilePrinterCoupled:`設計者のプリンター`,fromFilePrinterCoupledHint:`このファイルが設計されたプリンター向けの値です。お使いのプリンターでは不適切または範囲外になる場合があります。`,fromFileOverridesPreset:`プリセットを上書き`,fromFileOverridesPresetHint:`ファイルはこれを {{value}} に設定していますが、選択したプリセットは {{preset}} です。ファイルを優先する場合のみチェックしてください。`,useFromFile:`{{option}} に元ファイルの値を使用する`,otherFromFile:`このファイルのその他の設定`,fromFileSummary:`このファイルではデザイナーが{{count}}件のプロセス設定を変更しています。使われるのはチェックしたものだけです。`,fromFileUseAll:`デザイナーの設定を使う`,fromFileUseAllHint:`他のプリンターでも通用する設定にチェックを入れます。デザイナーのプリンター向けに調整された設定と、選んだプリセットを定義する設定はオフのままです。`,fromFileClear:`{{count}}件を解除`,loading:`スライサー設定を読み込んでいます…`,mode:{simple:`シンプル`,advanced:`詳細`,expert:`エキスパート`},searchPlaceholder:`設定を検索`,resetAll:`{{count}} 件をリセット`,resetOption:`既定値に戻す`,noMatches:`この検索に一致する設定はありません。`},slice:{filamentSlotUnset:`未設定`,processSettingsEmbedded:`「ファイル内蔵の設定を使用」が有効な間は使用されません。このスライスはファイル自身の設定で実行されます。`,processSettingsInactive:`無効`,presetsHidden:`{{count}} 件を非表示`,showAllPresets:`すべて表示`,showFewerPresets:`表示を減らす`,processSettings:`プロセス設定`,processSettingsHint:`このスライス用に選択したプリセットを調整します。変更しない項目はプリセットの定義のままです。`,processSettingsChanged:`{{count}} 件変更`,processSettingsUnchanged:`プリセットの既定値`,title:`モデルをスライス`,action:`スライス`,actionAll:`{{count}} プレートすべてをスライス`,actionAllTitle:`すべてのプレートを 1 つのマルチプレート出力としてスライスします（アーカイブは 1 件）。フィラメントの選択はプロジェクトで定義されたすべてのスロットを対象とします。`,allPlatesToggle:`{{count}} プレートすべてをスライス`,slicing:`スライス中…`,printer:`プリンタープロファイル`,process:`プロセスプロファイル`,filament:`フィラメントプロファイル`,filamentSlot:`フィラメント {{index}}（{{type}}）`,filamentColour:`フィラメントの色`,selectPreset:`— プリセットを選択 —`,loadingPresets:`プリセットを読み込み中…`,analyzingPlateFilaments:`プレートのフィラメントを分析中…`,analyzingPlateFilamentsHint:`このプレートが使用するAMSスロットを検出するためにプレビュースライスを実行中。キャッシュ後は再オープンが即座になります。`,previewToast:`{{name}}を分析中 – {{elapsed}}`,previewWithProgress:`{{name}}を分析中 – {{stage}} ({{percent}}%) – {{elapsed}}`,notUsedByPlate:`— このプレートでは使用しない`,noPresetsForSlot:`プリセットなし`,otherPrinters:`他のプリンター`,presetsLoadFailed:`プリセットの読み込みに失敗。先に設定 → プロファイルからインポートしてください。`,refreshPresets:`再読み込み`,refreshPresetsTitle:`プリセットを再取得 — クラウドとバンドルの最新リストを取得します（Bambu Studio または Bambu Handy でプリセットを削除した後にお使いください）`,allPresetsRequired:`すべてのプリセットを選択する必要があります`,useEmbedded:`ファイルに埋め込まれた設定を使用`,useEmbeddedHint:`上のプロファイルではなく、設計者が設定したとおり（ウォール、インフィル、フィラメント）にスライスします。お使いのプリンターがファイルと一致するため利用できます。`,autoOrient:`オブジェクトの向きを自動で調整`,autoOrientHint:`スライスする前に、各オブジェクトを印刷に適した面へ自動で回転させます。ファイルに保存された向きは上書きされます。`,autoArrange:`プレート上に自動配置`,autoArrangeHint:`オブジェクトが重ならないようにスライサーが並べ直します。ファイルの配置は置き換えられます。`,enqueuing:`スライスジョブを送信中…`,queued:`待機中…`,failed:`スライスに失敗。サイドカーのログを確認してください。`,startedToast:`バックグラウンドで{{name}}をスライス中…`,queuedToast:`待機中: {{name}} – {{elapsed}}`,runningToast:`{{name}}をスライス中 – {{elapsed}}`,runningWithProgress:`{{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,runningWithProgressMultiPlate:`プレート {{plateIndex}} / {{plateCount}} • {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,completedToast:`{{name}}をスライス済み`,externalWriteFallbackToast:`内部ライブラリに保存しました: 外部フォルダーに書き込めませんでした`,failedTitle:`スライスに失敗しました`,failedToast:`{{name}}のスライスに失敗: {{detail}}`,tier:{local:`インポート済み`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`標準`},cloud:{notAuthenticated:`Bambu Cloudにサインイン（設定 → プロファイル → Bambu Cloud）してクラウドプリセットを表示。`,expired:`Bambu Cloudセッションの有効期限切れ – クラウドプリセットを更新するには再ログインしてください。`,unreachable:`Bambu Cloudに接続できません。ローカルと標準のプリセットは引き続き使用できます。`},orcaCloud:{notAuthenticated:`Orcaプリセットを表示するには、Orca Cloudにサインインしてください（プロファイル → Orca Cloud）。`,expired:`Orca Cloudセッションが期限切れです — Orcaプリセットを更新するには再度サインインしてください。`,unreachable:`Orca Cloudは現在到達できません。他のプリセットは引き続き動作します。`},bedType:{label:`ビルドプレート`,auto:`自動（プロセスプリセットを使用）`,coolPlate:`クールプレート`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`},pipelines:{label:`パイプライン`,applyAria:`パイプラインを適用`,applyPrompt:`パイプラインを適用…`,empty:`保存されたパイプラインがありません`,saveButton:`パイプラインとして保存`,saveTitle:`現在の4つのスロットの選択を再利用可能なパイプラインとして保存`,namePlaceholder:`パイプライン名`,nameAria:`新しいパイプライン名`,toast:{applied:`「{{name}}」を適用しました`,saved:`パイプラインを保存しました`,saveFailed:`保存に失敗しました`}}},spoolman:{title:`Spoolman連携`,enabled:`Spoolman有効`,url:`Spoolman URL`,connected:`接続中`,disconnected:`未接続`,testConnection:`接続テスト`,sync:`同期`,syncing:`同期中...`,lastSync:`最終同期`,linkToSpoolman:`Spoolmanに連携`,openInSpoolman:`Spoolmanで開く`,unlinkSpool:`スプールのリンクを解除`,unlinkConfirmTitle:`スプールの割り当てを解除しますか？`,unlinkConfirmMessage:`このスロットからスプールが削除されます。スプール自体のデータは変更されません。`,selectSpool:`スプールを選択`,noUnlinkedSpools:`割り当てられていないスプールがありません`,linkSuccess:`スプールが正常に割り当てられました`,linkFailed:`スプールの割り当てに失敗しました`,unlinkSuccess:`スプールの割り当てが正常に解除されました`,unlinkFailed:`スプールの割り当て解除に失敗しました`,linkedSpool:`割り当て済みスプール`,spoolId:`スプールID`,fillSourceLabel:`(Spoolman)`,weight:`重量`,remaining:`残り`,disableWeightSync:`AMS推定重量同期を無効化`,disableWeightSyncDesc:`AMS推定値から残量を更新しません。AMSの割合ベースの推定よりもSpoolmanの使用量追跡を優先する場合に使用してください。新しいスプールは引き続きAMS推定値を初期重量として使用します。`,reportPartialUsage:`失敗した印刷の部分使用量を報告`,reportPartialUsageDesc:`印刷が失敗またはキャンセルされた場合、レイヤー進捗に基づいてその時点までの推定フィラメント使用量を報告します。`},locations:{title:`保管場所`,subtitle:`棚・引き出しなど、スプールの物理的な保管場所を管理`,add:`場所を追加`,addShort:`追加`,edit:`場所を編集`,name:`名前`,spools:`スプール`,sensors:`センサー`,empty:`保管場所がありません。最初の棚または引き出しを作成してください。`,manage:`保管場所`,createPlaceholder:`例: 棚A、引き出し1`,nameRequired:`場所名が必要です`,created:`場所を作成しました`,updated:`場所を更新しました`,deleted:`場所を削除しました`,saveFailed:`場所の保存に失敗しました`,deleteFailed:`場所の削除に失敗しました`,deleteBlocked:`削除前にこの場所のスプールをすべて移動してください`,confirmDelete:`「{{name}}」を削除しますか？`,confirmDeleteMessage:`この場所はカタログから削除されます。先にスプールを移動してください。`,confirmDeleteMessageWithSensors:`この場所はカタログから削除されます。先にスプールを移動してください。接続されているセンサーも削除されます。`},inventory:{title:`スプール在庫管理`,subtitle:`スプールを管理`,addToInventory:`在庫に追加`,addToInventoryPending:`追加中...`,addToInventorySuccess:`スプールを在庫に追加しました`,addToInventoryFailed:`スプールの在庫追加に失敗しました`,unknownSpoolTitle:`新しいフィラメントを検出`,unknownSpoolMessage:`{{location}} で不明なRFIDタグのスプールが検出されました。今すぐ在庫に追加しますか？`,unknownSpoolSlot:`スロット`,bulk:{selectAllVisible:`表示中をすべて選択`,selectRow:`行を選択`,selectGroup:`グループを選択`,selectionCount:`{{count}} 件選択中`,edit:`編集`,printLabels:`ラベルを印刷`,resetUsage:`使用量をリセット`,restore:`復元`,archive:`アーカイブ`,delete:`削除`,clearSelection:`選択を解除`,editTitle:`スプールを一括編集`,editSubtitle:`選択中の {{count}} 件に適用されます。チェックを入れた項目のみ更新されます。`,editHint:`項目に入力すると更新対象としてマークされます。チェック済みの行のみ送信されます。空のままだとスプールは変更されません（項目を空にする操作はスプール個別の編集で行ってください）。`,useCustom:`"{{value}}" を使用`,toggleField:`この項目の更新を切り替え`,changeCount:`{{count}} 件の項目が更新されます。`,applyPending:`適用中...`,applyButton:`{{count}} 件に適用`,deleteTitle:`選択したスプールを削除`,archiveTitle:`選択したスプールをアーカイブ`,restoreTitle:`選択したスプールを復元`,resetUsageTitle:`選択したスプールの使用量をリセット`,deleteMessage:`{{count}} 件のスプールを完全に削除しますか？元に戻せません。`,archiveMessage:`{{count}} 件のスプールをアーカイブしますか？後で復元できます。`,restoreMessage:`{{count}} 件のアーカイブ済みスプールを復元しますか？`,resetUsageMessage:`{{count}} 件のスプールの「累計使用量」カウンターをリセットしますか？残量は保持されます。`,updateSuccess:`{{count}} 件のスプールを更新しました`,updateFailed:`一括更新に失敗しました`,updatePartial:`{{ok}} 件更新、{{failed}} 件失敗`,updateAllFailed:`{{count}} 件すべての更新に失敗しました — 再試行のため選択は維持されます`,deleteSuccess:`{{count}} 件のスプールを削除しました`,deleteFailed:`一括削除に失敗しました`,deletePartial:`{{ok}} 件削除、{{failed}} 件失敗`,deleteAllFailed:`{{count}} 件すべての削除に失敗しました — 再試行のため選択は維持されます`,archiveSuccess:`{{count}} 件のスプールをアーカイブしました`,archiveFailed:`一括アーカイブに失敗しました`,archivePartial:`{{ok}} 件アーカイブ、{{failed}} 件失敗`,archiveAllFailed:`{{count}} 件すべてのアーカイブに失敗しました — 再試行のため選択は維持されます`,restoreSuccess:`{{count}} 件のスプールを復元しました`,restoreFailed:`一括復元に失敗しました`,restorePartial:`{{ok}} 件復元、{{failed}} 件失敗`,restoreAllFailed:`{{count}} 件すべての復元に失敗しました — 再試行のため選択は維持されます`,invalidHex:`16進数 6 文字（RRGGBB）または 8 文字（RRGGBBAA）を入力してください。それ以外の場合この項目は適用されません。`},spoolmanMixedContentTitle:`Spoolman を HTTPS で読み込めません — ブラウザが混在コンテンツをブロックしています`,spoolmanMixedContentBody:`Bambuddy はリバースプロキシ経由で HTTPS 配信されていますが、Spoolman の URL は HTTP のままです。ブラウザはセキュリティ上の理由で混在コンテンツをブロックするため、埋め込みの Spoolman UI を表示できません。Spoolman も HTTPS でアクセスできる必要があります。`,spoolmanMixedContentFixReverseProxy:`Spoolman を Bambuddy と同じリバースプロキシ（Traefik / Nginx / Caddy）の後ろに HTTPS で配置し、設定で Spoolman URL を新しい HTTPS アドレスに更新してください。`,spoolmanMixedContentFixOpenNewTab:`回避策として Spoolman を新しいタブで HTTP として開くことができます — 混在コンテンツのルールは埋め込みフレームのみに適用され、独立したタブは問題なく動作します。`,spoolmanOpenInNewTab:`Spoolman を新しいタブで開く`,labels:{title:`スプールラベルを印刷`,selectedCount:`{{count}}件選択中`,pickSpools:`ラベルを印刷するスプールを選択:`,monochrome:`モノクロ（白黒プリンター）`,monochromeHint:`カラースウォッチを削除してテキストを広げます`,startingPosition:`ラベルの開始位置`,startingPositionRange:`シートテンプレートのみ：L7160 は1～21、5160 は1～30に対応します。`,startingPositionInvalid:`1～{{capacity}}の整数を入力してください。`,startingPositionFirst:`位置1から印刷を開始します。`,startingPositionSkipped:`最初のシートでは位置1～{{lastPosition}}を空白にします。`,startingPositionRangeError:`このシートの開始位置は1～{{capacity}}で指定してください。`,searchPlaceholder:`名前、ブランド、#IDで検索`,filterByMaterial:`素材:`,allMaterials:`すべて`,selectVisible:`表示中をすべて選択 ({{count}})`,deselectVisible:`表示中を選択解除`,clearAll:`すべてクリア`,noSpoolsToShow:`表示するスプールはありません。フィルターを調整して再試行してください。`,noMatches:`現在の検索またはフィルターに一致するスプールはありません。`,printOne:`このスプールのラベルを印刷`,printLabels:`ラベルを印刷…`,bulkTitle:`現在表示中の{{count}}件からラベルを印刷するスプールを選択`,noSpoolsTitle:`ラベル付けするスプールなし`,error:`ラベルを生成できませんでした: {{msg}}`,sortBy:{label:`並べ替え:`,id:`ID順`,color:`色順`},templates:{amsHolderSmall:{label:`AMS ホルダー — 小 (74 × 33 mm)`,hint:`1ページにつき1枚；MakerWorld モデル 752566 (AMS フィラメントラベルホルダー) の印刷可能なラベルに対応します。`},amsHolderLarge:{label:`AMS ホルダー — 大 (75 × 55 mm)`,hint:`1ページにつき1枚；AMS フィラメントラベルホルダーのカード紙挿入バージョンに対応します。色見本、ブランド、素材、ID、QR コードを表示できる広さです。`},box40x30:{label:`ボックスラベル (40 × 30 mm)`,hint:`1ページに1枚。DK/Brother の一般的なロールサイズで、フィラメント袋や保管箱のラベルに適しています。`},box:{label:`Box label (62 × 29 mm)`,hint:`1ページに1ラベル、Brother PT/QLおよびDymoの小さなラベル用サイズ。`},averyL7160:{label:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,hint:`EUシート規格、A4ページに21枚のラベル。`},avery5160:{label:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,hint:`米国シート規格、Letterページに30枚のラベル。`}}},csv:{importButton:`CSVインポート`,exportButton:`CSVエクスポート`,modalTitle:`CSVからスプールをインポート`,selectFile:`CSVファイルを選択するか、ここにドラッグ`,dragHint:`ヘッダー: material（必須）、brand、subtype、color_name、rgba、…`,parsing:`ファイルを読み込み中…`,previewError:`CSVファイルを読み込めませんでした`,validCount:`有効{{count}}件`,errorCount:`エラー{{count}}件`,skippedCount:`スキップ{{count}}件`,colRow:`行`,colStatus:`ステータス`,colColor:`色`,colorResolved:`カタログから色を補完`,colorCrossMaterial:`別の素材から色を取得しました — カタログに完全一致なし`,duplicateExisting:`この素材・ブランド・色のスプールは既に存在します — それでも新しいスプールとしてインポートされます`,spoolmanHint:`Spoolmanモードでは、Spoolman内蔵のCSVインポート/エクスポートを使用してください。`,importValidRows:`有効な{{count}}行をインポート`,noValidRows:`有効な行がありません`,importing:`インポート中…`,importSuccess:`{{count}}個のスプールをインポートしました`,importError:`インポートに失敗しました`,exportError:`エクスポートに失敗しました`},addSpool:`スプールを追加`,editSpool:`スプールを編集`,copySpool:`スプールをコピー`,material:`素材`,selectMaterial:`素材を選択...`,subtype:`サブタイプ`,brand:`ブランド`,searchBrand:`ブランドを検索...`,useCustomBrand:`「{{brand}}」を使用`,useCustomMaterial:`カスタム素材を使用: {{material}}`,suggestedOptions:`おすすめ`,allOptions:`すべて`,colorName:`色名`,colorNamePlaceholder:`ジェイドホワイト、ファイアレッド...`,color:`色`,hexColor:`HEXカラー`,pickColor:`カスタムカラーを選択`,labelWeight:`表示重量`,coreWeight:`空スプール重量`,searchSpoolWeight:`スプール重量を検索...`,weightUsed:`使用量`,currentWeight:`残量`,measuredWeight:`計測重量`,spoolName:`スプール`,costPerKg:`kgあたりのコスト`,storageLocation:`保管場所`,temperature:`温度`,humidity:`湿度`,battery:`バッテリー`,storageLocationPlaceholder:`例：棚A、引き出し1`,openInInventory:`インベントリで開く`,measuredWeightError:`計測重量は{{min}}gから{{max}}gの間で入力してください。`,slicerFilament:`スライサーフィラメント`,slicerFilamentName:`スライサープリセット名`,slicerPreset:`スライサープリセット`,searchPresets:`フィラメントプリセットを検索...`,selectedPreset:`選択済み`,noPresetsFound:`プリセットが見つかりません`,tempOverrides:`温度オーバーライド`,note:`メモ`,notePlaceholder:`このスプールに関する追加メモ...`,category:`カテゴリ`,categoryPlaceholder:`例：本番、試作、クライアントA`,categoryNone:`カテゴリなし`,storageLocationNone:`保管場所未設定`,lowStockThresholdOverride:`在庫低下のしきい値（このスプール）`,lowStockThresholdOverrideHelp:`空欄の場合、グローバル設定（{{global}}%）を使用します。`,clearRfid:`RFIDタグをクリア`,rfidCleared:`RFIDタグをクリアしました`,archive:`アーカイブ`,restore:`復元`,noSpools:`スプールがありません。最初のスプールを追加してください。`,noAvailableSpools:`利用可能なスプールがありません。インベントリにスプールを追加するか、別のスロットからスプールの割り当てを解除してください。`,kProfiles:`Kプロファイル`,addKProfile:`Kプロファイルを追加`,assignSpool:`スプールを割り当て`,unassignSpool:`割り当て解除`,assignSuccess:`スプールを割り当て、AMSスロットを設定しました`,assignPendingInsert:`割り当てました。スプールを挿入したときにスロットが設定されます。`,assignFailed:`スプールの割り当てに失敗しました`,selectSpool:`このスロットに割り当てるスプールを選択`,assigned:`割り当て済み`,assigning:`割り当て中...`,searchSpools:`スプールを検索...`,showAllSpools:`すべてのスプールを表示`,spoolmanSpools:`Spoolman スプール`,allMaterials:`すべての素材`,filterByBrand:`ブランドで絞り込み...`,showArchived:`アーカイブ済みを表示`,quickAdd:`クイック追加（在庫）`,quantity:`数量`,stock:`在庫`,configured:`設定済み`,spoolsCreated:`{{count}}本のスプールを作成しました`,spoolsPartiallyCreated:`{{total}}本中{{created}}本のスプールを作成しました（一部失敗）`,spoolCreated:`スプールを作成しました`,spoolUpdated:`スプールを更新しました`,spoolDeleted:`スプールを削除しました`,deepLinkSpoolNotFound:`スプールが見つかりません`,deepLinkFetchFailed:`スプールを読み込めませんでした — もう一度お試しください`,spoolArchived:`スプールをアーカイブしました`,spoolRestored:`スプールを復元しました`,kProfileSaveFailed:`Kプロファイル設定を保存できませんでした`,syncWeightSpoolNotFound:`スプールが見つかりません — 削除された可能性があります`,syncWeightSpoolmanUnreachable:`Spoolmanに接続できません — 後でもう一度お試しください`,syncWeightFailed:`重量の同期に失敗しました`,spoolmanUnreachable:`Spoolmanに接続できません — 後でもう一度お試しください`,deleteSpoolNotFound:`スプールが見つかりません — すでに削除された可能性があります`,deleteFailed:`スプールを削除できませんでした`,archiveSpoolNotFound:`スプールが見つかりません — すでに削除された可能性があります`,archiveFailed:`スプールをアーカイブできませんでした`,restoreSpoolNotFound:`スプールが見つかりません — すでに削除された可能性があります`,restoreFailed:`スプールを復元できませんでした`,saveFailed:`変更を保存できませんでした`,tagClearFailed:`タグを削除できませんでした`,deleteConfirm:`このスプールを削除しますか？この操作は元に戻せません。`,archiveConfirm:`このスプールをアーカイブしますか？`,advancedSettings:`詳細設定`,filamentInfoTab:`フィラメント情報`,paProfileTab:`PAプロファイル`,colorAndCostTab:`色とコスト`,printersTab:`プリンター`,filamentInfo:`フィラメント`,additional:`追加情報`,loadingPresets:`クラウドプリセットを読み込み中...`,cloudConnected:`クラウド接続済み`,cloudNotConnected:`クラウド未接続（デフォルト使用）`,recentColors:`最近`,searchColors:`色を検索...`,searchResults:`検索結果`,allColors:`すべての色`,commonColors:`一般的な色`,showLess:`少なく表示`,showAll:`すべて表示`,noColorsFound:`一致する色がありません`,noResults:`結果なし`,extraColorsLabel:`追加の色`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`2〜8個の16進数ストップをカンマで区切って貼り付けます。グラデーションとして表示されます。`,extraColorsInvalid:`無効な16進数を無視: {{tokens}}`,colorEffectLabel:`エフェクト`,colorEffect:{none:`なし`,sparkle:`スパークル`,wood:`ウッド`,marble:`マーブル`,glow:`グロー`,matte:`マット`,silk:`シルク`,galaxy:`ギャラクシー`,rainbow:`レインボー`,metal:`メタル`,translucent:`半透明`,gradient:`グラデーション`,dualColor:`デュアルカラー`,triColor:`トリカラー`,multicolor:`マルチカラー`},selectMaterialFirst:`フィラメント情報タブで素材を選択してください。`,noPrintersConfigured:`プリンターが設定されていません。プリンターを追加してください。`,matchingFilter:`フィルター`,anyBrand:`すべてのブランド`,anyVariant:`すべてのバリアント`,autoSelect:`自動選択`,matches:`件一致`,match:`件一致`,noMatches:`一致なし`,connected:`接続済み`,offline:`オフライン`,printerOffline:`プリンターがオフラインです。接続してキャリブレーションプロファイルを表示してください。`,noKProfilesMatch:`選択したフィラメントに一致するKプロファイルがありません。`,leftNozzle:`左ノズル`,rightNozzle:`右ノズル`,profilesSelected:`キャリブレーションプロファイル選択済み`,filamentPreset:`フィラメントプリセット`,presetUseSpoolDefault:`スプールのプリセットを使用`,presetInherited:`継承`,presetOverride:`上書き`,presetNeedsModel:`このプリンターはまだモデルを報告していないため、専用のプリセットを設定できません。`,autoMatchPresets:`自動で割り当て`,autoMatchPresetsHint:`各モデル名を含むスプールプリセットのバリアントを探します`,kProfilesPerPrinter:`Kプロファイル`,kProfileNotSet:`未設定`,kProfileFlowMismatch:`このプロファイルは{{profile}}ノズルで測定されましたが、装着されているのは{{fitted}}ノズルのため適用されません`,nozzle:`ノズル`,unknownModel:`不明なモデル`,onePrinter:`プリンター1台`,nPrinters:`プリンター{{n}}台`,filamentPresetsLoadFailed:`このスプールのモデル別プリセットを読み込めませんでした`,filamentPresetSaveFailed:`モデル別プリセットを保存できませんでした`,totalInventory:`在庫合計`,totalConsumed:`総消費量`,byMaterial:`素材別`,inPrinter:`プリンター内`,lowStock:`残量少`,sinceTracking:`追跡開始以降`,resetConsumedCounter:`カウンタをリセット`,resetConsumedCounterTooltip:`このスプールの消費量カウンタを0にする。残量は変更されません。`,resetConsumedCounterConfirm:`このスプールの消費量カウンタを0にリセットしますか？以降の印刷は再びゼロからカウントされます。スプール自体、残量計算、設定は変更されません。`,resetAllConsumedCounters:`すべてのカウンタをリセット`,resetAllConsumedCountersTooltip:`すべてのスプールの消費量カウンタを0にする。残量は変更されません。`,resetAllConsumedCountersConfirm:`{{count}}件すべてのスプール（アーカイブ済みを含む）の消費量カウンタを0にリセットしますか？「累計消費量」の値がクリアされ、以降の印刷はゼロからカウントされます。スプール自体と残量は変更されません。`,consumedCounterReset:`カウンタをリセットしました`,allConsumedCountersReset:`{{count}}件のスプールのカウンタをリセットしました`,resetConsumedCounterFailed:`カウンタのリセットに失敗しました`,loadedInAms:`AMS/Extに装填中`,remaining:`残り`,weightCheck:`重量チェック`,lastWeighed:`最終計量`,neverWeighed:`未計量`,search:`スプールを検索...`,showing:`表示`,to:`〜`,of:`/`,show:`表示`,spools:`スプール`,spool:`スプール`,page:`ページ`,noSpoolsMatch:`結果なし`,noSpoolsMatchDesc:`検索やフィルターを調整してみてください。`,active:`アクティブ`,archived:`アーカイブ済み`,all:`すべて`,used:`使用済み`,new:`新規`,clearFilters:`フィルターをクリア`,table:`テーブル`,cards:`カード`,net:`正味`,groupSimilar:`グループ化`,groupedSpools:`{{count}}本の同一スプール`,groupedRows:`行`,columns:`列`,configureColumns:`列の設定`,configureColumnsDesc:`ドラッグして並べ替えるか、矢印を使用してください。目のアイコンで表示/非表示を切り替えます。`,visible:`表示中`,reset:`リセット`,cancel:`キャンセル`,applyChanges:`変更を適用`,moveUp:`上へ移動`,moveDown:`下へ移動`,hideColumn:`列を非表示`,showColumn:`列を表示`,linkToSpool:`スプールにリンク`,tagLinked:`タグがスプールにリンクされました`,tagLinkFailed:`タグのリンクに失敗しました`,tagAlreadyLinked:`タグは既にスプール #{{id}} にリンクされています`,unknownTag:`不明なRFIDタグが検出されました`,usageHistory:`使用履歴`,noUsageHistory:`まだ使用記録がありません`,printName:`プリント名`,weightConsumed:`消費重量`,clearHistory:`クリア`,historyCleared:`使用履歴がクリアされました`,fillSourceLabel:`(在庫)`,lowStockThresholdError:`しきい値は0.1から99.9の間でなければなりません`,assignMismatchTitle:`材料の不一致`,assignMismatchMessage:`選択したスプールの材料「{{spoolMaterial}}」は、{{location}} のトレイ材料「{{trayMaterial}}」と一致しません。割り当てますか？`,assignMismatchConfirm:`強制的に割り当て`,assignPartialMismatchMessage:`スプールの材料「{{spoolMaterial}}」は「{{trayMaterial}}」に似ていますが、{{location}} と完全には一致しません。続行しますか？`,assignProfileMismatchMessage:`スプールのプロファイル「{{spoolProfile}}」は {{location}} のトレイプロファイル「{{trayProfile}}」と一致しません。続行しますか？`,assignReconfigureNote:`AMSスロットはスプールのプロファイルで再構成されます。`,spoolmanFilamentCatalog:`Spoolmanフィラメントカタログ`,pickFromSpoolmanCatalog:`Spoolmanカタログから選択…`,spoolmanFilamentSelected:`Spoolmanカタログからフィラメントを選択しました`,spoolmanFilamentUnlinked:`フィラメントカタログのリンクを解除しました`,noSpoolmanFilaments:`Spoolmanカタログにフィラメントが見つかりません`,spoolmanFilamentColorSwatch:`フィラメントの色`,spoolWeightManagedBySpoolman:`空スプールの重量はSpoolmanでフィラメントタイプごとに管理されています`,spoolmanCatalogLoadFailed:`Spoolmanのフィラメントカタログを読み込めませんでした`},timelapse:{title:`タイムラプス`,create:`タイムラプスを作成`,download:`ダウンロード`,delete:`削除`,preview:`プレビュー`,frameRate:`フレームレート`,quality:`品質`,processing:`バックアップファイルを処理中...`,noTimelapses:`利用可能なタイムラプスがありません`},ams:{title:`AMS`,slot:`スロット`,empty:`<空>`,emptySlot:`空のスロット`,slotEmpty:`空`,slotUnconfigured:`?`,emptySlotReset:`スプール未割当`,unknown:`不明`,humidity:`湿度`,temperature:`温度`,filamentType:`フィラメントタイプ`,filamentColor:`色`,remaining:`残り`,history:`AMS履歴`,noHistory:`メンテナンス履歴がありません`,configureSlot:`フィラメントプロファイルとK値でスロットを設定`,externalSpool:`外部スプール`,profile:`プロファイル`,kFactor:`K値`,kFactorShort:`K値`,fill:`充填率`,configure:`設定`,used:`使用済み`,remainingUnit:`残り`},printModal:{variants:{editNote:`これらの候補はキュー追加時に決まります。変更するにはキャンセルして追加し直してください。`,title:`プリンターの候補`,help:`1つのジョブ、キューは1枠。条件に合う最初に空いたプリンターがそのファイルを印刷します。`,unknownModel:`不明なモデル`,plateFor:`{{filename}} のプレート`,moveUp:`上へ`,moveDown:`下へ`,queued:`{{count}}件の候補付きでキューに追加しました`},selectPrinter:`プリンターを選択`,selectPlate:`プレートを選択`,filamentMapping:`フィラメントマッピング`,useArchiveMapping:`マッピング`,useArchiveMappingTooltip:`タイプ/色で照合する代わりに、このアーカイブに保存されたAMSマッピング（スライサーから）からすべてのスロットを選択します。`,clickToChangeSlot:`クリックしてスロットの割り当てを変更`,reRead:`再読み込み`,plateN:`プレート {{n}}`,plateFilamentsUnreadable:`選択したプレートのフィラメントを読み取れなかったため、割り当てできません。そのプレートの選択を解除すると、残りをキューに追加できます。`,totalCost:`合計コスト:`,slotRemainingShort:` - 残{{grams}}g`,printSettings:`印刷設定`,bedLeveling:`ベッドレベリング`,flowCalibration:`フローキャリブレーション`,vibrationCalibration:`振動キャリブレーション`,layerInspection:`第一層検査`,timelapse:`タイムラプス`,cancel:`キャンセル`,noPrintersAvailable:`利用可能なプリンターがありません`,printerBusy:`プリンターは使用中です`,printerOffline:`プリンターはオフラインです`,sameTypeDifferentColor:`同じ種類、異なる色`,filamentTypeNotLoaded:`フィラメントタイプが未読み込み`,statusReady:`準備完了`,statusColorMismatch:`色が不一致`,statusTypeNotFound:`タイプが見つかりません`,requiredTooltip:`必要: {{name}} - {{color}}`,manuallySelected:`手動で選択`,autoMatched:`自動で一致`,selectSlot:`スロットを選択`,exactColorMatch:`色が完全に一致`,slotForFilament:`{{name}} のプリンタースロット`,overrideForFilament:`{{name}} のフィラメントオーバーライド`,sameTypeDifferentColorDetail:`同じ種類、異なる色: 必要な色は {{required}}、スロットは {{loaded}}`,requiredTypeNotInPrinter:`必要なフィラメントタイプがプリンターに見つかりません。`,whenToPrint:`印刷タイミング`,asap:`即時`,queue:`キュー`,schedule:`スケジュール`,dateTime:`日時`,invalidDateTime:`有効な日時を入力してください`,openCalendar:`カレンダーを開く`,requireManualStart:`手動開始を要求`,requirePreviousSuccess:`前の印刷が成功した場合のみ開始`,autoOffAfter:`完了後にプリンターの電源を切る`,helpAsap:`印刷はキューの先頭に追加され、対象プリンターがアイドルになるとすぐに開始します。`,helpSchedule:`予定時刻にプリンターがアイドルであれば印刷を開始します。使用中の場合は、利用可能になるまで待機します。`,helpQueue:`印刷はキューの最後に追加されます。`,leftNozzle:`L`,rightNozzle:`R`,leftNozzleTooltip:`左ノズル`,rightNozzleTooltip:`右ノズル`,ftsSameInletHint:`この印刷で使うフィラメントはすべてフィラメント経路切替器 IN-{{inlet}} にあります。同じ入口のフィラメント同士の交換は遅くなります。1 つをもう一方の入口の AMS に移すと速くなります。`,rackPosition:`ラック位置`,rackPositionTooltip:`このフィラメントを印刷するラック上のノズル。位置番号はプリンター本体と同じです。`,rackEmptyPosition:`このラック位置は空です`,rackWrongNozzle:`{{has}} ノズルが装着されています。このフィラメントには {{needs}} が必要です`,filamentOverride:`フィラメントオーバーライド`,filamentOverrideHint:`モデルベースの割り当てに使用するフィラメントをオプションで上書きします。スケジューラは元の3MF値ではなく、選択したフィラメントに基づいてマッチングします。`,originalFilament:`オリジナル`,overrideWith:`変更先`,resetToOriginal:`オリジナルに戻す`,insufficientFilamentTitle:`フィラメントが不足しています`,waitingForAmsStatus:`{{printer}} のAMSステータスを待機しています…`,insufficientFilamentMessage:`割り当てられたスプールの一部は、この印刷に必要な量より残量が少ないです:`,insufficientFilamentLine:`{{printer}} - {{slot}}: 必要 {{required}}g、残り {{remaining}}g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: 必要 {{required}}g、一致するスプール合計で {{remaining}}g（AMSフィラメントバックアップ）`,printAnyway:`それでも印刷`,forceColorMatch:`カラーマッチを強制`,staggerPrinterStarts:`プリンター開始を段階的に`,staggerGroupSize:`グループサイズ`,staggerInterval:`間隔（分）`,staggerPreview:`{{printers}}台のプリンター → {{size}}台ずつ{{groups}}グループ、{{interval}}分ごとに開始`,staggerLastGroup:`最終グループ: {{count}}`,staggerTotal:`合計: {{minutes}}分`,staggerToPrinters:`{{count}}台のプリンターに段階的に送信`,gcodeInjection:`自動印刷G-codeを挿入`,insufficientBudget:`予算が不足しています`,unlimitedNoBudget:`無制限 – 予算上限は設定されていません。`,noPrintableCostCenters:`印刷に利用できる有効なコストセンターがありません。管理者に印刷アクセスの付与を依頼してください。`},backup:{includesEncryptionKey:`ローカルバックアップにはMFA暗号化キーファイル（DATA_DIR/.mfa_encryption_key）が含まれ、バックアップZIPは自己完結型です。ZIPを機密扱いしてください — ファイルを持つ人は誰でも内部のOIDCクライアントシークレットとTOTPシークレットを復号できます。`,title:`バックアップと復元`,createBackup:`バックアップを作成`,restoreBackup:`バックアップの復元`,restoreDescription:`バックアップファイルからすべてのデータを置き換える`,downloadBackup:`バックアップをダウンロード`,uploadBackup:`バックアップをアップロード`,lastBackup:`最終バックアップ`,autoBackup:`自動バックアップ`,backupNow:`今すぐバックアップ`,restoreWarning:`警告: バックアップの復元は現在のすべてのデータを上書きします。`,includeArchives:`アーカイブを含む`,includeSettings:`設定を含む`,includeProfiles:`プロファイルを含む`,backupSuccess:`バックアップを作成しました`,restoreSuccess:`バックアップを復元しました`,backupFailed:`バックアップに失敗しました`,restoreFailed:`復元に失敗しました`,restoreNote:`復元中、仮想プリンターは停止されます`,githubBackup:`GitHubバックアップ`,enabled:`有効`,cloudLoginRequired:`Bambu Cloudログインが必要です。GitHubバックアップを有効にするには、プロファイル → クラウドプロファイルからサインインしてください。`,cloudLoginRequiredShort:`Cloudログインが必要`,githubDescription:`プロファイルをプライベートGitHubリポジトリに自動的に同期し、バックアップとバージョン履歴を保持します。`,repoIsPrivate:`リポジトリはプライベートです — バックアップしても安全です。`,repoIsPublicWarning:`リポジトリが公開（PUBLIC）です。Bambuddyのバックアップには MQTT 認証情報、Home Assistant トークン、Prometheus トークン、Bambu Cloud のメールアドレス、K-プロファイル経由のプリンタアクセスコードが含まれます。プロバイダー側でリポジトリをプライベートに変更するまで保存はブロックされます。`,repoVisibilityUnknown:`リポジトリの公開設定を確認できませんでした。Bambuddy はプライベートと確認できないリポジトリへのバックアップを拒否します。保存はブロックされます。`,repositoryUrl:`リポジトリURL`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`安全でないHTTPを許可`,allowInsecureHttpHint:`TLSなしのプライベートネットワーク上のセルフホストインスタンスに対して有効化`,personalAccessToken:`個人アクセストークン`,tokenSaved:`(保存済み)`,enterNewToken:`新しいトークンを入力して更新`,tokenHintGitHub:`Contentsの読み書き権限を持つきめ細かいトークン、またはrepoスコープを持つクラシックトークン。`,tokenHintGitLab:`apiスコープ、またはread_repositoryとwrite_repositoryの両方を持つトークン。`,tokenHintGitea:`write:repositoryスコープを持つトークン。`,tokenHintForgejo:`write:repositoryスコープを持つトークン。このリポジトリだけに限定したトークンで十分です。`,branch:`ブランチ`,provider:`Gitプロバイダー`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`手動のみ`,hourly:`毎時`,daily:`毎日`,weekly:`毎週`,includeInBackup:`バックアップに含める`,kProfiles:`Kプロファイル`,kProfilesDescription:`接続されたプリンターからの圧力キャリブレーション`,noPrintersConnected:`プリンターが接続されていません`,printersConnected:`{{connected}}/{{total}} 接続済み`,cloudProfiles:`クラウドプロファイル`,cloudProfilesDescription:`Bambu CloudとOrca Cloudからのフィラメント、プリンター、プロセスプリセット`,cloudProfilesAccounts:`接続済みアカウント — Bambu Cloud: {{bambu}}、Orca Cloud: {{orca}}`,appSettings:`アプリ設定`,appSettingsDescription:`Bambuddy設定（データベース全体）`,spoolInventory:`スプール在庫`,spoolInventoryDescription:`フィラメントスプール、使用履歴、コスト追跡`,printArchives:`印刷アーカイブ`,printArchivesDescription:`印刷履歴メタデータ（gcode/3MFファイルなし）`,lastBackupAt:`最終バックアップ:`,noBackupsYet:`バックアップはまだありません`,next:`次回:`,startingBackup:`バックアップを開始しています...`,test:`テスト`,enableBackup:`バックアップを有効化`,testConnection:`接続テスト`,enterRepoUrl:`リポジトリURLを入力してください`,enterRepoAndToken:`リポジトリURLとアクセストークンを入力してください`,repoRequired:`リポジトリURLは必須です`,tokenRequired:`アクセストークンは必須です`,githubBackupEnabled:`GitHubバックアップが有効になりました`,tokenUpdated:`トークンが更新されました`,settingsSaved:`設定が保存されました`,failedToSave:`保存に失敗しました: {{message}}`,backupCompleteFiles:`バックアップ完了 - {{count}}ファイルが更新されました`,backupSkippedNoChanges:`バックアップをスキップ - 変更なし`,backupFailed2:`バックアップに失敗しました: {{message}}`,clearedLogs:`{{count}}件のログを削除しました`,failedToClearLogs:`ログの削除に失敗しました: {{message}}`,restoreFromGit:{button:`Git から復元`,title:`Git バックアップから復元`,subtitle:`コミットと復元する項目を選択します`,commitLabel:`バックアップのコミット`,latestCommit:`最新のバックアップ (ブランチ先端)`,categoriesLabel:`復元する項目`,inspecting:`バックアップの内容を読み込んでいます...`,itemCount:`バックアップ内に {{count}} 件`,overwriteLabel:`既存のエントリを上書きする`,overwriteOn:`既存のエントリはバックアップの内容で更新されます。`,overwriteOff:`不足しているエントリのみ追加され、既存のものは変更されません。`,selectedCount:`{{count}} 件選択中`,restoring:`復元しています...`,confirmTitle:`バックアップから復元しますか?`,confirmMessage:`選択したカテゴリをこのコミットから復元します。不足しているエントリが追加され、既存のエントリはそのまま残ります。`,confirmMessageOverwrite:`選択したカテゴリをこのコミットから復元し、ローカルに既存のエントリを上書きします。この操作は取り消せません。`,kprofilesOverwriteCaveat:`Kプロファイルは例外です。スロットへの書き込みは、プリンター上のキャリブレーションを常に置き換えます。`,tally:`復元 {{restored}} 件、スキップ {{skipped}} 件、失敗 {{failed}} 件`,reloadHint:`復元したデータを全体に反映するには Bambuddy を再読み込みしてください。`,partialHint:`上に表示されたカテゴリーは完了し、保存されています。表示されていないカテゴリーは実行されていません。`,failed:`復元に失敗しました。`,loadFailed:`バックアップリポジトリを読み取れませんでした。`,details:{notPresent:`このバックアップコミットには含まれていません`,unreadableJson:`読み取れない JSON: {{paths}}`,settingsNoPayload:`データに設定が含まれていません`,settingsCredentialsWillSkip:`認証情報のようなキー {{count}} 件はスキップされます`,settingsCompanionWillSkip:`認証情報のようなキー {{count}} 件はスキップされ、それらに依存するスイッチ {{companion}} 件はオフのままになります`,settingsCompanionOnlyWillSkip:`スイッチ {{companion}} 件はオフのままになります - それぞれに必要な認証情報はバックアップから復元できません`,spoolsUsageCount:`使用履歴 {{count}} 件を含む`,archivesMetadataOnly:`メタデータのみ - 3MF ファイルとサムネイルは Git バックアップに含まれません`,kprofilesPrinterCount:`プリンター {{count}} 台分`},notes:{noData:`この種類のデータはこのバックアップに含まれていません`,archivesPrinterMissing:`一部のアーカイブが存在しないプリンターを参照していました - リンクを解除しました`,archivesProjectMissing:`一部のアーカイブが存在しないプロジェクトを参照していました - リンクを解除しました`,archivesOwnerCleared:`一部のアーカイブが存在しないユーザーを参照していました - 所有者を解除したため、管理者が割り当て直すまで archives:read_all 権限を持つユーザーにしか表示されません`,archivesOwnerUnmatched:`一部のアーカイブはこのインスタンスに存在しない所有者を指しています - バックアップのユーザー ID から推測せずに所有者を解除したため、管理者が割り当て直すまで archives:read_all 権限を持つユーザーにしか表示されません`,archivesOwnerUnknown:`一部のアーカイブは所有者なしで復元されました - このバックアップに所有者が記録されていないため、管理者が割り当てるまで archives:read_all 権限を持つユーザーにしか表示されません`,archivesUndeleted:`バックアップ後に削除されたアーカイブが再び表示されます - 上書きが有効でした`,archivesMetadataOnly:`復元されたアーカイブはメタデータのみです - 3MF ファイルとサムネイルは Git バックアップに含まれません`,spoolUsageUnresolved:`使用履歴 {{count}} 件をスキップしました - 対応するスプールがこのバックアップのスプール一覧にないため、紐付ける先がありません。`,spoolUsageUnlinked:`使用履歴 {{count}} 件を印刷履歴へのリンクなしで復元しました - リンクを保持するにはスプール在庫と一緒に印刷アーカイブも選択してください。`,spoolTagKept:`スプールタグ {{count}} 件をそのままにしました - バックアップの内容ではその後スキャンされたタグが消えるか、別のスプールに移ってしまうためです。`,settingsCredentialsSkipped:`認証情報のようなキー {{count}} 件をスキップしました - シークレットは手動で再入力してください`,settingsAuthSkipped:`認証設定 {{count}} 件をスキップしました - ロックアウトチェックが働くよう、設定 > 認証で変更してください`,settingsCompanionSkipped:`{{keys}} はオフのままにしました - 各項目に必要な認証情報はバックアップから復元できず、このインスタンスにも保存されていないため、オンにすると連携が未認証のままになります`,settingsMqttRelayFailed:`MQTT 設定を復元しましたが、リレーを再接続できませんでした - Bambuddy を再起動してください`,kprofilesAlwaysOverwrite:`K プロファイルは常にプリンター側の該当スロットを上書きします`,kprofilesAckUnreliable:`応答しないプリンターも復元済みとして数えます - プロファイルはプリンター側で確認してください`,kprofilesPrinterMissing:`シリアル {{serial}} のプリンターがありません - スキップしました`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) は接続されていません - スキップしました`,kprofilesUnknownNozzle:`{{serial}} に想定外のノズル径 {{nozzle}} - そのまま送信しました`,kprofilesUnmatched:`{{nozzle}} 用のプロファイル {{count}} 件は {{printer}} に該当がありませんでした - 新規プロファイルとして追加しました`,kprofilesSendFailed:`{{nozzle}} のプロファイルを {{printer}} ({{serial}}) に送信できませんでした`,kprofilesRefused:`{{printer}} ({{serial}}) が {{nozzle}} のプロファイルを拒否しました: {{reason}}`,kprofilesStepFailed:`K プロファイルの処理を完了できませんでした - {{reason}}。それまでに復元された内容は保存されています。`}},history:`履歴`,clear:`クリア`,date:`日付`,status:`ステータス`,trigger:`種類`,triggers:{manual:`バックアップ（手動）`,scheduled:`バックアップ（スケジュール）`,restore:`復元`},commit:`コミット`,localBackup:`ローカルバックアップ`,localBackupDescription:`データベース、アーカイブ、アップロード、すべてのファイルを含むBambuddyデータの完全なバックアップを作成します。`,downloadBackupLabel:`バックアップをダウンロード`,completeBackupZip:`完全バックアップ: データベース + 全ファイル (ZIP)`,download:`ダウンロード`,preparingBackup:`バックアップを準備しています...`,creatingArchive:`バックアップアーカイブを作成しています...大きなアーカイブの場合、時間がかかることがあります。`,downloadingFile:`バックアップファイルをダウンロードしています...`,backupDownloaded:`バックアップのダウンロードが成功しました`,failedToCreateBackup:`バックアップの作成に失敗しました: {{message}}`,restore:`復元`,restoreReplacesAll:`復元はすべてのデータを置き換えます。`,restoreReplacesAllDetail:`現在のデータベースとファイルは完全に置き換えられます。復元後に再起動が必要です。`,restoreConfirmTitle:`バックアップを復元`,restoreConfirmMessage:`"{{filename}}"から復元してもよろしいですか？現在のデータベースとすべてのファイルが完全に置き換えられます。復元後にアプリケーションの再起動が必要です。`,restoreConfirmButton:`バックアップを復元`,uploadingFile:`バックアップファイルをアップロードしています...`,backupRestoredRestart:`バックアップが復元されました。Bambuddyを再起動してください。`,failedToRestore:`バックアップの復元に失敗しました。ファイル形式を確認してください。`,reloadNow:`今すぐリロード`,creatingBackup:`バックアップを作成中`,restoringBackup:`バックアップを復元中`,preparing:`準備中...`,processing:`処理中...`,doNotClosePage:`このページを閉じたり、移動しないでください。大きなバックアップの場合、この操作には数分かかることがあります。`,restoring:`復元中...`,restoreComplete:`復元完了`,restoreFailed2:`復元失敗`,importSettings:`バックアップファイルから設定をインポート`,pleaseWaitRestoring:`データの復元中です。お待ちください`,selectBackupFile:`クリックしてバックアップファイルを選択 (.jsonまたは.zip)`,duplicateHandling:`重複処理の仕組み:`,matchPrinters:`プリンター`,matchPrintersBy:`シリアル番号で照合`,matchSmartPlugs:`スマートプラグ`,matchSmartPlugsBy:`IPアドレスで照合`,matchNotificationProviders:`通知プロバイダー`,matchNotificationProvidersBy:`名前で照合`,matchFilaments:`フィラメント`,matchFilamentsBy:`名前 + タイプ + ブランドで照合`,matchArchives:`アーカイブ`,matchArchivesBy:`コンテンツハッシュで照合（常にスキップ）`,matchPendingUploads:`保留中のアップロード`,matchPendingUploadsBy:`ファイル名で照合`,matchSettingsTemplates:`設定とテンプレート`,matchSettingsTemplatesBy:`常に上書き`,replaceExisting:`既存のデータを置き換え`,keepExisting:`既存のデータを保持`,overwriteDescription:`既に存在する項目をバックアップデータで上書き`,keepDescription:`まだ存在しない項目のみ復元`,overwriteCaution:`注意:`,overwriteWarning:`上書きすると、現在の設定がバックアップのデータで置き換えられます。プリンターのアクセスコードはセキュリティのため上書きされません。`,cancel:`キャンセル`,processingBackup:`バックアップファイルを処理しています...`,itemsRestored:`復元済み`,itemsSkipped:`スキップ済み`,restored:`復元済み`,skippedAlreadyExist:`スキップ（既に存在）`,filesCategory:`ファイル（3MF、サムネイルなど）`,andMore:`...他{{count}}件`,newApiKeysGenerated:`新しいAPIキーが生成されました`,keysShownOnce:`これらのキーは一度だけ表示されます。今すぐコピーしてください！`,copy:`コピー`,noDataFound:`バックアップファイルに復元するデータが見つかりませんでした。`,close:`閉じる`,scheduledBackup:`スケジュールされたバックアップ`,scheduledBackupDescription:`スケジュールに基づいてバックアップスナップショットを自動作成。出力ディレクトリはNASや外部ストレージにマウント可能。`,frequency:`頻度`,backupTime:`時間`,retention:`保持期間`,retentionDescription:`保持するバックアップ数`,outputPath:`出力パス`,outputPathPlaceholder:`デフォルト: {{path}}`,outputPathDescription:`デフォルトの場所を使用する場合は空白のまま`,runNow:`今すぐ実行`,backupFiles:`バックアップファイル`,noScheduledBackups:`バックアップなし`,deleteBackup:`削除`,deleteBackupConfirm:`このバックアップファイルを削除しますか？`,backupRunning:`バックアップ中...`,scheduledBackupComplete:`バックアップが正常に完了しました`,scheduledBackupFailed:`バックアップに失敗`,nextBackup:`次回バックアップ`,backupSize:`サイズ`,localTimeHint:`現地時刻 ({{tz}})`,defaultPathLabel:`デフォルト:`,pathCheck:{title:`Bambuddy はこのディレクトリに書き込めません`,howToFix:`対処方法:`,sandboxed:`Bambuddy サービスは {{path}} に書き込めません。systemd ユニットが ProtectSystem=strict で動作しているため、インストール・データ・ログの各ディレクトリ以外はすべてサービスから読み取り専用になります。自分のシェルからは書き込める場所であっても同様です。`,read_only:`{{path}} は読み取り専用のファイルシステム上にあります。`,permission_denied:`Bambuddy には {{path}} への書き込み権限がありません。ディレクトリの所有者とパーミッションを確認してください。`,no_space:`{{path}} があるファイルシステムに空き容量がありません。`,not_a_directory:`{{path}} は存在しますが、ディレクトリではありません。`,missing:`{{path}} は存在せず、作成もできませんでした。`,error:`Bambuddy は {{path}} に書き込めません。`,ephemeralTitle:`これらのバックアップはコンテナの再作成で失われます`,container_ephemeral:`{{path}} はホストではなく Bambuddy コンテナ内にあります。そこに書き込まれたバックアップはコンテナを再作成すると失われます。ホスト側のディレクトリをマウントしてください:`},categories:{settings:`設定`,notification_providers:`通知プロバイダー`,notification_templates:`通知テンプレート`,smart_plugs:`スマートプラグ`,printers:`プリンター`,filaments:`フィラメント`,maintenance_types:`メンテナンスタイプ`,archives:`アーカイブ`,projects:`プロジェクト`,pending_uploads:`保留中のアップロード`,external_links:`外部リンク`,api_keys:`APIキー`}},tags:{title:`タグ`,addTag:`タグを追加`,editTag:`タグを編集`,deleteTag:`タグを削除`,tagName:`タグ名`,tagColor:`タグの色`,noTags:`タグがありません`,deleteConfirm:`このタグを削除しますか？`,manageTags:`タグを管理`},uploadModal:{title:`3MFファイルのアップロード`,dragDrop:`.3mfファイルをここにドラッグ＆ドロップ`,or:`または`,browseFiles:`ファイルを参照`,extractionInfo:`プリンターモデルは3MFファイルのメタデータから自動的に抽出されます。`,uploaded:`アップロード済み`,failed:`アップロードに失敗しました`,uploading:`アップロード中...`,upload:`アップロード`,uploadFailed:`アップロード失敗`},editArchive:{title:`アーカイブを編集`,name:`名前`,namePlaceholder:`印刷名`,printer:`プリンター`,noPrinter:`プリンターなし`,project:`プロジェクト`,noProject:`プロジェクトなし`,itemsPrinted:`印刷数`,itemsPrintedHelp:`この印刷ジョブで製造したアイテム数。プレート全体が失敗した場合は 0 を入力します。`,filamentUsed:`使用フィラメント (g)`,filamentUsedPlaceholder:`例: 46.16`,filamentUsedHelp:`3MF なしでアーカイブされた印刷は、手入力するとフィラメント合計に反映されます。3MF があるアーカイブを再スキャンすると、この値はファイルから読み直されます。`,notes:`メモ`,notesPlaceholder:`この印刷についてメモを追加...`,externalLink:`外部リンク`,externalLinkPlaceholder:`https://...`,externalLinkHelp:`Printables、Thingiverse、その他のソースへのリンク`,tags:`タグ`,tagsPlaceholder:`タグを追加...`,addMoreTags:`タグをさらに追加...`,matchingTags:`"{{query}}" に一致`,existingTags:`既存のタグ`,clickToAdd:`（クリックして追加）`,status:`ステータス`,failureReason:`失敗理由`,selectReason:`理由を選択...`,photos:`印刷結果の写真`,photosHelp:`+ をクリックして印刷結果の写真を追加`,printResult:`印刷結果`,saving:`保存中...`,failureReasons:{adhesionFailure:`定着不良`,spaghettiDetached:`スパゲッティ / 剥離`,layerShift:`レイヤーシフト`,cloggedNozzle:`ノズル詰まり`,filamentRunout:`フィラメント切れ`,warping:`反り`,stringing:`糸引き`,underExtrusion:`押出不足`,powerFailure:`電源障害`,userCancelled:`ユーザーによるキャンセル`,noStatusUpdate:`ステータス更新を受信できませんでした`,other:`その他`},statuses:{completed:`完了`,failed:`失敗`,aborted:`キャンセル`,printing:`印刷中`}},kProfiles:{title:`Kプロファイル`,noPrintersConfigured:`プリンターが設定されていません`,addPrinterInSettings:`Kプロファイルを管理するには設定でプリンターを追加してください`,noActivePrinters:`アクティブなプリンターがありません`,enablePrinterConnection:`Kプロファイルを表示するにはプリンター接続を有効にしてください`,loadingProfiles:`Kプロファイルを読み込み中...`,printerOffline:`プリンターオフライン`,printerOfflineDesc:`選択したプリンターは接続されていません。電源を入れてKプロファイルを表示してください。`,noMatchingProfiles:`一致するプロファイルなし`,noMatchingProfilesDesc:`検索条件に一致するプロファイルがありません`,noKProfiles:`Kプロファイルなし`,noKProfilesDesc:`{{diameter}}mmノズル用の圧力キャリブレーションプロファイルが見つかりません`,createFirstProfile:`最初のプロファイルを作成`,printer:`プリンター`,nozzle:`ノズル`,refresh:`更新`,addProfile:`K-プロファイルを追加`,export:`エクスポート`,import:`インポート`,select:`選択`,selectAll:`すべて選択`,delete:`削除`,searchPlaceholder:`名前またはフィラメントで検索...`,allExtruders:`すべてのエクストルーダー`,leftOnly:`左のみ`,rightOnly:`右のみ`,allFlow:`すべてのフロー`,hfOnly:`HFのみ`,sOnly:`Sのみ`,sortName:`ソート: 名前`,sortKValue:`ソート: K値`,sortFilament:`ソート: フィラメント`,leftExtruder:`左エクストルーダー`,rightExtruder:`右エクストルーダー`,modal:{addTitle:`Kプロファイルを追加`,editTitle:`Kプロファイルを編集`,profileName:`プロファイル名`,profileNamePlaceholder:`マイPLAプロファイル`,kValue:`K値`,kValuePlaceholder:`0.020`,kValueHelp:`一般的な範囲: PLA 0.01〜0.06、PETG 0.02〜0.10`,filament:`フィラメント`,selectFilament:`フィラメントを選択...`,source:{local:`インポート済み`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`内蔵`},noFilamentsHelp:`利用できるフィラメントがありません。Bambu Cloud にログインするか、プロファイル → ローカルプロファイル でプリセットをインポートしてください。`,searchFilaments:`フィラメントを検索...`,noFilamentMatches:`検索に一致するフィラメントはありません`,flowType:`フロータイプ`,highFlow:`ハイフロー`,standard:`スタンダード`,nozzleSize:`ノズルサイズ`,extruder:`エクストルーダー`,extruders:`エクストルーダー`,left:`左`,right:`右`,notes:`メモ（ローカル保存）`,notesPlaceholder:`このプロファイルのメモを追加...`,notesHelp:`メモはBambuddyに保存され、プリンターには保存されません`,syncing:`プリンターと同期中...`,savingExtruder:`エクストルーダーに保存中 {{current}}/{{total}}...`,pleaseWait:`お待ちください`},deleteConfirm:{title:`プロファイルを削除`,cannotUndo:`元に戻せません`,message:`「{{name}}」をプリンターから削除しますか？`},bulkDelete:{title:`プロファイルを削除`,cannotUndo:`元に戻せません`,message:`選択した{{count}}件のプロファイルをプリンターから削除しますか？`},toast:{profileSaved:`Kプロファイルを保存しました`,profilesSaved:`Kプロファイルを{{count}}台のエクストルーダーに保存しました`,selectAtLeastOneExtruder:`エクストルーダーを1つ以上選択してください`,selectFilament:`先にフィラメントを選択してください`,filamentNotResolvable:`{{name}} に対応する Bambu フィラメント ID がないため、プリンターはプロファイルを保存できません`,profileDeleted:`Kプロファイルを削除しました`,profilesDeleted:`{{count}}件のプロファイルを削除しました`,exportedProfiles:`{{count}}件のプロファイルをエクスポートしました`,importedProfiles:`{{total}} 件中 {{count}} 件のプロファイルをインポートしました`,noProfilesToExport:`エクスポートするプロファイルがありません`,invalidFileFormat:`無効なファイル形式`,failedToParseImport:`インポートファイルの解析に失敗しました`,failedToSaveBatch:`Kプロファイルの保存に失敗しました`,noteSaved:`メモを保存しました`,failedToSaveNote:`メモの保存に失敗しました`},permission:{noRead:`プロファイルを更新する権限がありません`,noCreate:`プロファイルを追加する権限がありません`,noUpdate:`Kプロファイルを更新する権限がありません`,noDelete:`Kプロファイルを削除する権限がありません`,noExport:`プロファイルをエクスポートする権限がありません`,noImport:`プロファイルをインポートする権限がありません`}},virtualPrinter:{title:`仮想プリンター`,running:`稼働中`,stopped:`停止`,description:{default:`Bambu StudioとOrcaSlicerに表示される仮想プリンターを有効化。このプリンターに送信されたファイルは印刷せずに直接アーカイブされます。`,proxy:`スライサーのトラフィックを実際のプリンターに転送するプロキシを有効化。任意のネットワーク経由でリモート印刷が可能です。`},enable:{title:`仮想プリンターを有効化`,visibleInSlicer:`スライサーの検出リストに「Bambuddy」として表示`,proxyingTo:`{{name}}にプロキシ中`,notActive:`非アクティブ`},model:{title:`プリンターモデル`,description:`エミュレートするプリンターモデルを選択。`,restartWarning:`モデルを変更すると仮想プリンターが再起動されます`},accessCode:{title:`アクセスコード`,isSet:`アクセスコードが設定されています`,notSet:`アクセスコード未設定 - 有効化に必要です`,placeholder:`8文字のコードを入力`,placeholderChange:`新しいコードを入力して変更`,hint:`正確に8文字必要です。スライサーの認証に使用されます。`,charCount:`({{count}}/8)`,inheritedFromTarget:`ターゲットプリンターから継承`,derivedFromTargetHint:`ターゲットプリンターのアクセスコードを使用します。ブリッジはスライサーの認証情報を実機プリンターに転送するため、コードが一致している必要があります。変更するにはプリンターの設定でアクセスコードを編集してください。`,reveal:`アクセスコードを表示`,hide:`アクセスコードを隠す`},targetPrinter:{title:`ターゲットプリンター`,configured:`プロキシターゲット設定済み`,notConfigured:`ターゲットプリンター未選択 - プロキシモードに必要です`,placeholder:`プリンターを選択...`,hint:`スライサートラフィックの転送先プリンターを選択。プリンターはLANモードである必要があります。`,noPrinters:`プリンターが設定されていません。プロキシモードを使用するにはまずプリンターを追加してください。`},remoteInterface:{title:`ネットワークインターフェース上書き`,configured:`インターフェース上書き有効`,optional:`オプション — 自動検出IPが間違っている場合に使用（複数NIC、Docker、VPNなど）`,placeholder:`自動検出（デフォルト）...`,hint:`SSDPで広告され、TLS証明書に使用されるIPアドレスを上書きします。Bambuddyに複数のネットワークインターフェースがある場合に便利です。`},mode:{title:`モード`,archive:`アーカイブ`,archiveDesc:`ファイルを即座にアーカイブ`,review:`レビュー`,reviewDesc:`アーカイブ前にレビュー`,queue:`キュー`,queueDesc:`アーカイブしてキューに追加`,proxy:`プロキシ`,proxyDesc:`実際のプリンターに転送`},autoDispatch:{title:`自動ディスパッチ`,description:`キューに追加されたときに自動的に印刷を開始します。オフの場合、手動ディスパッチを待ちます。`},queueForceColorMatch:{title:`色の一致を強制`,description:`正確なフィラメントタイプと色がロードされていないプリンターへの送信を拒否します。デフォルトはオフ — これがないと、キューはモデルのみのマッチングを使用し、間違った色がロードされたプリンターを選ぶ可能性があります。`},saveAmsMapping:{title:`AMSマッピングを保存`,description:`スライサー自身が選択したAMSスロット（project_file MQTTコマンドから）をアーカイブに保存し、後で再印刷する際にファイルのタイプ/色から再導出するのではなく、同じ物理スプールを再利用できるようにします。デフォルトはオフです。`},gcodeInjection:{title:`G-codeインジェクション`,description:`設定でモデルごとに構成したG-codeスニペットを、このVPのジョブに適用します。デフォルトはオフです。`},tailscaleDisabled:{title:`Tailscale統合`,description:`このVPがTailscale経由で公開されていることをマークするには有効にしてください。スライサーに貼り付けるIPがわかるよう、ホストのTailscaleアドレスを表示します。CAインポート手順は変更されません — このトグルは証明書に影響しません。`},setupRequired:{title:`セットアップが必要です`,description:`仮想プリンター機能を使用するには追加のシステム設定が必要です。ポートフォワーディング、ファイアウォールルール、プラットフォーム固有の設定が含まれます。`,readGuide:`有効にする前にセットアップガイドをお読みください`},howItWorks:{title:`仕組み`,step1:`同じLAN上では、仮想プリンターはスライサー（Bambu Studio / OrcaSlicer）に自動的に表示されます。他のネットワークからは、IPアドレスとアクセスコードで手動で追加してください。`,step2:`アーカイブ、レビュー、キューモードでは、スライサーの「送信」ボタンを使用して3MFファイルをBambuddyにアップロードします。スライサーは「印刷成功」と表示しますが、ファイルは保存され、印刷はされません。`,step3:`プロキシモードでは、仮想プリンターはすべてのトラフィックを実際のプリンターに転送します。直接接続されているかのように印刷がすぐに開始されます。`},status:{title:`ステータス詳細`,printerName:`プリンター名`,model:`モデル`,serialNumber:`シリアル番号`,mode:`モード`,pendingFiles:`保留中のファイル`,targetPrinter:`ターゲットプリンター`,ftpPort:`FTPポート`,mqttPort:`MQTTポート`,ftpConnections:`FTP接続数`,mqttConnections:`MQTT接続数`},toast:{updated:`仮想プリンター設定を更新しました`,failedToUpdate:`設定の更新に失敗しました`,copyFailed:`コピーに失敗しました — テキストを手動で選択してください`,accessCodeRequired:`先にアクセスコードを設定してください`,targetPrinterRequired:`先にターゲットプリンターを選択してください`,bindIpRequired:`先にバインドIPを設定してください`,accessCodeEmpty:`アクセスコードは空にできません`,accessCodeLength:`アクセスコードは8文字である必要があります`,targetCodeChangedRebind:`アクセスコードが新しいターゲットプリンターに同期されました。新しいコードを反映するには、スライサーでこのデバイスを再登録してください。`,created:`仮想プリンターを作成しました`,failedToCreate:`仮想プリンターの作成に失敗しました`,deleted:`仮想プリンターを削除しました`,failedToDelete:`仮想プリンターの削除に失敗しました`},list:{title:`仮想プリンター`,add:`追加`,addFirst:`仮想プリンターを追加`,empty:`仮想プリンターが設定されていません。追加して始めましょう。`},bindIp:{title:`バインドインターフェース`,placeholder:`インターフェースを選択...`,hint:`この仮想プリンターがバインドするネットワークインターフェース。プリンターごとに一意である必要があります。`},proxy:{accessCodeHint:`プロキシモードでは、スライサーにターゲットプリンターのアクセスコードを使用してください。接続は実際のプリンターに透過的に転送されます。`},addDialog:{title:`仮想プリンターを追加`,name:`名前`,hint:`アクセスコード、ターゲットプリンター、その他の設定は作成後に設定できます。`,create:`作成`},deleteConfirm:{title:`仮想プリンターを削除`,message:`「{{name}}」を削除してもよろしいですか？このプリンターのすべてのサービスが停止されます。`},archiveNameSource:{title:`アーカイブ名のソース`,description:`仮想プリンター経由でファイルが到着したときに、新しいアーカイブをどのように命名するかを選択します。「メタデータ」は3MFに埋め込まれたスライサータイトル（デフォルト）を使用します。「ファイル名」はBambu StudioがFTPで送信したファイル名を使用します。注: Bambu Studioは、3MFにタイトルフィールドが存在する場合、「プリンターに送信」ダイアログで入力した名前をその値で上書きするため、両方のモードで同じ文字列になることが多くあります。`,metadata:`メタデータ`,filename:`ファイル名`},caCert:{title:`スライサー証明書`,description:`仮想プリンターは Bambuddy CA が署名した TLS 証明書を使用します。この CA 証明書をスライサーの信頼ストアに一度インポートすると接続が受け入れられます — コマンドラインからコピーする必要はありません。`,copy:`コピー`,copied:`コピーしました`,download:`ダウンロード`,fingerprint:`SHA-256`}},modelViewer:{openInSlicer:`スライサーで開く`,openInSlicerWith:`{{slicer}}で開く`,moreSlicerOptions:`その他のスライサーオプション`,openInSlicerFailed:`スライサーで開けませんでした`,tabs:{model:`3Dモデル`},notAvailable:`利用不可`,plates:`プレート`,allPlates:`全プレート`,plateNumber:`プレート {{number}}`,plateCount:`{{count}} プレート`,plateCount_other:`{{count}} プレート`,objectCount:`{{count}} オブジェクト`,objectCount_other:`{{count}} オブジェクト`,filamentCount:`{{count}} フィラメント`,filamentCount_other:`{{count}} フィラメント`,eta:`予想時間 {{minutes}} 分`,noPreview:`このファイルのプレビューは利用できません`,pagination:{pageOf:`ページ {{current}} / {{total}}`,prev:`前へ`,next:`次へ`},errors:{failedToLoad:`ファイルの読み込みに失敗しました`,noMeshes:`3MFファイルにメッシュが見つかりません`,unsupportedFormat:`サポートされていないファイル形式です`}},maintenanceDescriptions:{lubricateCarbonRods:`カーボンロッドに潤滑剤を塗布してスムーズな動きを確保`,lubricateRails:`リニアレールの潤滑`,cleanNozzle:`ノズル/ホットエンドの清掃`,checkBelts:`ベルト張力の確認`,cleanBuildPlate:`ビルドプレートの清掃`,checkExtruder:`エクストルーダーギアの確認`,checkCooling:`冷却ファンの確認`,generalInspection:`総合点検`,cleanCarbonRods:`カーボンロッドの清掃`,lubricateSteelRods:`スチールロッドに潤滑剤を塗布してスムーズな動きを確保`,cleanSteelRods:`スチールロッドの清掃`,cleanLinearRails:`リニアレールを拭いてほこりや汚れを除去`,checkPtfeTube:`PTFEチューブの確認`,replaceHepaFilter:`HEPAフィルター交換`,replaceCarbonFilter:`カーボンフィルター交換`,lubricateLeftNozzleRail:`左ノズルレールの潤滑`},haSensors:{label:`センサー`,unavailable:`利用不可`,blocksPrints:`{{entity}} — アラート中は印刷を保留します`,states:{open:`開`,closed:`閉`,unlocked:`解錠`,locked:`施錠`,detected:`検知`,clear:`なし`,wet:`濡れ`,dry:`乾燥`,problem:`異常`,ok:`正常`,running:`作動中`,stopped:`停止`,on:`オン`,off:`オフ`},sectionTitle:`Home Assistant センサー（プリンター）`,add:`センサーを追加`,addTitle:`Home Assistant センサーを追加`,editTitle:`Home Assistant センサーを編集`,empty:`センサーがまだありません。Home Assistant のドアセンサーや温度計を連携すると、プリンターカードに表示されます。`,unknownPrinter:`不明なプリンター`,badgeBlocks:`印刷を保留`,badgeNotifies:`通知する`,badgeHidden:`カードに非表示`,printer:`プリンター`,entity:`エンティティ`,searchPlaceholder:`エンティティを検索...`,noEntities:`一致するエンティティがありません`,name:`表示名`,alertWhen:`アラート条件`,alertNever:`なし — 表示のみ`,alertAbove:`しきい値超過`,alertBelow:`しきい値未満`,alertHint:`アラート状態になるとプリンターカードで強調表示され、下のオプションが有効になります。`,showOnCard:`プリンターカードに表示`,notifyOnAlert:`アラート発生時に通知を送信`,blockPrint:`アラート中はキューの印刷を保留`,blockPrintHint:`ジョブはキューに残り、センサーが解除されると自動的に開始します。Home Assistant に接続できない間は無視されます。`,toast:{created:`センサーを追加しました`,updated:`センサーを保存しました`,deleted:`センサーを削除しました`},error:{pickEntity:`Home Assistant のエンティティを選択してください`,nameRequired:`表示名を入力してください`,printerRequired:`プリンターを選択してください`,alertRequired:`先にアラート条件を設定してください`}},locationHaSensors:{sectionTitle:`Home Assistant センサー（保管場所）`,sectionDescription:`Home Assistant の温度・湿度・バッテリーセンサーを保管場所に紐づけると、フィラメントカードと一覧表にリアルタイムの値が表示されます。1つの保管場所につき、各カテゴリーで登録できるセンサーは1つだけです。`,add:`センサーを追加`,addTitle:`Home Assistant センサーを追加`,editTitle:`Home Assistant センサーを編集`,empty:`センサーがまだありません。Home Assistant の温度・湿度センサーを連携すると、フィラメントカードに表示されます。`,unknownLocation:`不明な保管場所`,location:`保管場所`,showOnCard:`フィラメントカードに表示`,overwriteConfirm:{title:`既存のセンサーを置き換えますか？`,messageTemperature:`「{{location}}」には既に温度センサーが連携されています: {{name}}。続行するとこれが置き換えられます。`,messageHumidity:`「{{location}}」には既に湿度センサーが連携されています: {{name}}。続行するとこれが置き換えられます。`,messageBattery:`「{{location}}」には既にバッテリーセンサーが連携されています: {{name}}。続行するとこれが置き換えられます。`},autoAdd:{confirmTitle:`他のセンサーも追加しますか？`,confirmMessage:`Bambuddy がこの保管場所の他のセンサーも見つけました。追加するものを選んでください。`,added:`追加で連携しました: {{names}}`,noneFound:`この保管場所に一致する温度・湿度・バッテリーセンサーが見つかりませんでした。`,onlyThisOne:`これだけ`},options:{buttonLabel:`センサーオプション`,title:`保管場所センサーのオプション`,description:`この値は、保管場所の最初のセンサーと一緒に温度・湿度・バッテリーセンサーが自動的に連携される際に使用されます。`,generalSettings:`一般設定`,pollInterval:`更新間隔（秒）`,pollIntervalHint:`Bambuddyがホームアシスタントに問い合わせて画面上のセンサー値を更新する頻度です。最小60秒。`,colorizeValues:`アラートしきい値に応じてセンサー値を色分け表示`,aboveColor:`しきい値超過時の色`,belowColor:`しきい値未満時の色`,optimalColor:`最適値の色`,colors:{red:`赤`,orange:`オレンジ`,yellow:`黄`,green:`緑`,blue:`青`,purple:`紫`,pink:`ピンク`},saved:`オプションを保存しました`,saveFailed:`オプションの保存に失敗しました`,reset:`リセット`,resetConfirm:{title:`既存のすべての保管場所センサーをリセットしますか？`,message:`これにより、既存のすべての保管場所の温度・湿度・バッテリーセンサーのアラートしきい値、通知、カード表示設定が上記の値で上書きされ、各センサーの名前も Home Assistant のフレンドリーネームに戻されます（プリンターのセンサーには影響しません）。この操作は元に戻せません。センサーの数によっては、少し時間がかかる場合があります。`},resetDone:`{{count}} 件の保管場所センサーに適用しました`,resetFailed:`保管場所センサーのリセットに失敗しました`},deleteAllConfirm:{title:`すべてのセンサーを削除しますか？`,message:`「{{location}}」に連携されているすべてのセンサー（{{count}}個）を削除します。この操作は元に戻せません。`},currentlyBound:`現在のバインド先: {{entity}}`,error:{locationRequired:`保管場所を選択してください`},toast:{created:`センサーを追加しました`,updated:`センサーを保存しました`,deleted:`センサーを削除しました`}},smartPlugs:{offline:`オフライン`,admin:`管理`,openPlugAdminPage:`プラグ管理ページを開く`,deleteSmartPlug:`スマートプラグを削除`,turnOnSmartPlug:`スマートプラグをオンにする`,turnOffSmartPlug:`スマートプラグをオフにする`,turnOn:`オンにする`,turnOff:`オフにする`,addSmartPlug:{scanningNetwork:`ネットワークをスキャン中...`,chooseEntity:`エンティティを選択...`,connectionFailed:`接続失敗`,searchEntities:`エンティティを検索...`,searchPowerSensors:`電力センサーを検索...`,searchEnergySensors:`エネルギーセンサーを検索...`,placeholders:{plugName:`リビングルームプラグ`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`電力トピックと同じ、または異なる`}},linkedTo:`リンク先:`,monitorOnly:`監視のみ`,alerts:`アラート`,scheduleOn:`オン {{time}}`,scheduleOff:`オフ {{time}}`,on:`オン`,off:`オフ`,power:`電力`,kwhToday:`本日のkWh`,settings:`設定`,automationSettings:`自動化設定`,showInSwitchbar:`スイッチバーに表示`,quickAccessSidebar:`サイドバーからクイックアクセス`,enabled:`有効`,enableAutomation:`このプラグの自動化を有効にする`,autoOn:`自動オン`,autoOnDescription:`印刷開始時にオンにする`,autoOff:`自動オフ`,autoOffDescription:`印刷完了時にオフにする（ワンショット）`,autoOffPersistent:`有効のまま維持`,autoOffPersistentDescription:`ワンショットではなく印刷間で有効のまま維持`,controlsPrinterPower:`プリンターに給電`,controlsPrinterPowerDescription:`このプラグがアクセサリー（フィルターファン、照明）のみに給電する場合はオフにします。オンのままだと、電源を切ったときにプリンターがオフラインとして扱われます。`,autoOffAfterDrying:`乾燥完了後に自動オフ`,autoOffAfterDryingDescription:`AMSの乾燥が完了したらオフにする`,delayAfterDryingMinutes:`乾燥後の遅延（分）`,turnOffDelayMode:`オフ遅延モード`,time:`時間`,temp:`温度`,delayMinutes:`遅延（分）`,tempThreshold:`温度しきい値（°C）`,tempThresholdDescription:`ノズルがこの温度以下に冷却されるとオフになります`,edit:`編集`,deleteConfirm:`"{{name}}"を削除してもよろしいですか？この操作は取り消せません。`,turnOnConfirm:`"{{name}}"をオンにしてもよろしいですか？`,turnOffConfirm:`"{{name}}"をオフにしてもよろしいですか？接続されたデバイスの電源が切れます。`,failedToTurn:`"{{name}}"を{{action}}できませんでした`,unknown:`不明`,addTitle:`スマートプラグを追加`,editTitle:`スマートプラグを編集`,stopScanning:`スキャン停止`,discoverTasmota:`Tasmotaデバイスを検出`,foundDevices:`{{count}}台のデバイスが見つかりました - クリックして選択:`,noDevicesFound:`ネットワーク上にTasmotaデバイスが見つかりません`,haNotConfigured:`Home Assistantが設定されていません。設定場所:`,haSettingsPath:`設定 → ネットワーク → Home Assistant`,selectEntity:`エンティティを選択 *`,ipAddress:`IPアドレス *`,nameLabel:`名前 *`,username:`ユーザー名`,password:`パスワード`,authHint:`Tasmotaデバイスが認証を必要としない場合は空のままにしてください`,linkToPrinter:`プリンターにリンク`,noPrinter:`プリンターなし（手動制御のみ）`,linkingDescription:`リンクすると印刷開始/完了時に自動でオン/オフできます`,powerAlerts:`電力アラート`,alertAbove:`上限アラート（W）`,alertBelow:`下限アラート（W）`,alertDescription:`電力消費がこれらのしきい値を超えた場合に通知します。無効にするには空のままにしてください。`,dailySchedule:`デイリースケジュール`,turnOnAt:`オンにする時刻`,turnOffAt:`オフにする時刻`,scheduleDescription:`毎日これらの時刻にプラグを自動的にオン/オフします。スキップするには空のままにしてください。`,showOnPrinterCard:`プリンターカードに表示`,displayOnPrinterCard:`プリンターカードにボタンを表示`,connectedResult:`接続成功！`,deviceLabel:`デバイス: {{name}} - `,stateLabel:`状態: {{state}}`,test:`テスト`,delete:`削除`,save:`保存`,add:`追加`,cancel:`キャンセル`,failedToStartScan:`スキャンを開始できませんでした`,nameRequired:`名前は必須です`,entityRequired:`Home AssistantプラグにはエンティティIDが必要です`,mqttTopicRequired:`電力、エネルギー、または状態監視用に少なくとも1つのMQTTトピックを設定する必要があります`,loadingEntities:`エンティティを読み込み中...`,loading:`読み込み中...`,failedToLoadEntities:`エンティティの読み込みに失敗しました: {{error}}`,noEntitiesMatching:`"{{search}}"に一致するエンティティが見つかりません`,noEntitiesAvailable:`利用可能なエンティティがありません`,searchingEntities:`すべてのエンティティを検索中（{{count}}件見つかりました）`,showingEntities:`switch、light、input_booleanを表示（{{count}}件利用可能）`,energyMonitoringOptional:`エネルギー監視（オプション）`,energyMonitoringHint:`電力/エネルギーデータを提供するセンサーを検索して選択します。`,powerSensorW:`電力センサー（W）`,energyTodayKwh:`本日のエネルギー（kWh）`,totalEnergyKwh:`総エネルギー（kWh）`,noMatchingSensors:`一致するセンサーがありません`,none:`なし`,mqttNotConfigured:`MQTTブローカーが設定されていません。ブローカーアドレスを設定してください:`,mqttSettingsPath:`設定 → ネットワーク → MQTT配信`,mqttNotConfiguredSuffix:`（配信を有効にする必要はありません。ブローカーの詳細を入力するだけです）。`,mqttMonitorOnlyDescription:`MQTTプラグはMQTTサブスクリプション経由で電力/エネルギーデータを受信します。オン/オフ制御は利用できません - MQTTブローカーまたはホームオートメーションシステムを使用してください。`,powerMonitoring:`電力監視`,energyMonitoring:`エネルギー監視`,stateMonitoring:`状態監視`,optional:`オプション`,topic:`トピック`,jsonPath:`JSONパス`,multiplier:`乗数`,onValue:`ON値`,mqttPowerHint:`JSONパスはJSONペイロードから値を抽出します（例: "power_l1"）。トピックが生の数値を送信する場合は空のままにしてください。
 乗数: mW→Wは0.001、kW→Wは1000を使用。`,mqttEnergyHint:`JSONパスはJSONペイロードから値を抽出します。生の値の場合は空のままにしてください。
 乗数: Wh→kWhは0.001、MWh→kWhは1000を使用。`,mqttStateHint:`JSONパスはJSONペイロードから値を抽出します。生の値の場合は空のままにしてください。
-ON値: "ON"を意味する正確な文字列。自動検出（ON、true、1）の場合は空のままにしてください。`,restControl:`コントロール`,restOnUrl:`オンURL`,restOffUrl:`オフURL`,restOnBody:`ONリクエスト本文`,restOffBody:`OFFリクエスト本文`,restMethod:`HTTPメソッド`,restHeaders:`Custom Headers (JSON)`,restStatusUrl:`ステータスURL`,restStatusPath:`状態JSONパス`,restStatusOnValue:`ON値`,restPowerUrl:`電力URL`,restPowerPath:`電力JSONパス`,restPowerMultiplier:`電力乗数`,restEnergyUrl:`エネルギーURL`,restEnergyPath:`エネルギーの JSON パス (今日)`,restEnergyTotalPath:`エネルギーの JSON パス (積算値)`,restEnergyTotalMultiplier:`積算値の乗数`,restEnergyTotalPathHint:`例: aenergy.total`,restEnergyTotalHint:`多くのスマートプラグ (Shelly はすべて) は、リセットされない積算カウンターしか返しません。その値は上の欄ではなく、ここに入力してください。今日の使用量として読むと深夜にリセットされず、昨日と合計は空のままになります。Bambuddy は積算値から今日と昨日を算出しますが、そのためには 1〜2 日分の測定値が必要です。Shelly はワット時で返すため、乗数には 0.001 を指定してください。`,restEnergyMultiplier:`エネルギー乗数`,restUrlRequired:`RESTプラグには少なくとも1つのURL（ONまたはOFF）が必要`,restHeadersHint:`例: {"Authorization": "Bearer your-token"}`,restBodyHint:`例：ON, {"state": "on"}`,restStatusHint:`現在の状態を取得するURL`,restPathHint:`例: state または data.power.status`,restPowerUrlHint:`電力データ用の個別URL（空欄の場合はステータスURLを使用）`,restEnergyUrlHint:`エネルギーデータ用の個別URL（空欄の場合はステータスURLを使用）`,restEnergyHint:`各値は個別のURLを使用するか、ステータスURLにフォールバックできます。乗数で単位変換が可能です（例：WhからkWhへの変換は0.001）。`,testConnection:`接続テスト`,connectionSuccess:`接続成功`,noSwitchesInSwitchbar:`スイッチバーにスイッチがありません`,enableSwitchbarHint:`設定 > スマートプラグで「スイッチバーに表示」を有効にしてください`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`メール`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`SMTPメール通知`,telegram:`Telegramボット経由の通知`,discord:`Webhook経由でDiscordチャンネルに送信`,ntfy:`無料のセルフホスト可能なプッシュ通知`,pushover:`シンプルで信頼性の高いプッシュ通知`,callmebot:`CallMeBot経由の無料WhatsApp通知`,webhook:`任意のURLへの汎用HTTP POST`,homeassistant:`Home Assistantダッシュボードの永続通知`,bark:`Bark経由のiOSプッシュ通知（セルフホスト可能）`},lastSuccess:`最終: {{date}}`,error:`エラー`,printer:`プリンター:`,allPrinters:`すべてのプリンター`,sendTestNotification:`テスト通知を送信`,eventSettings:`イベント設定`,enabled:`有効`,sendFromProvider:`このプロバイダーから通知を送信`,printEvents:`印刷イベント`,printerStatus:`プリンターステータス`,amsAlarms:`AMSアラーム`,amsHtAlarms:`AMS-HTアラーム`,printQueue:`印刷キュー`,start:`開始`,plateCheck:`プレートチェック`,complete:`完了`,failed:`失敗`,stopped:`停止`,progress:`進捗`,offline:`オフライン`,lowFilament:`フィラメント残量低下`,maintenance:`メンテナンス`,amsHumidity:`AMS湿度`,amsTemp:`AMS温度`,amsDryingSuspended:`乾燥を停止`,amsHtHumidity:`AMS-HT湿度`,amsHtTemp:`AMS-HT温度`,bedCooled:`ベッド冷却済み`,firstLayer:`第1層完了`,quiet:`静音`,digest:`ダイジェスト {{time}}`,printStarted:`印刷開始`,plateNotEmpty:`プレートが空でない`,plateNotEmptyDescription:`印刷前にオブジェクトが検出されました`,plateClearRequired:`プレート確認が必要`,plateClearRequiredDescription:`印刷完了、キューはプレート確認を待機中`,plateClear:`プレート確認`,printCompleted:`印刷完了`,bedCooledLabel:`ベッド冷却済み`,bedCooledDescription:`印刷後にベッドがしきい値以下に冷却`,firstLayerCompleteLabel:`第1層完了`,firstLayerCompleteDescription:`第1層完了時にスナップショット付きで通知`,missingSpoolAssignmentLabel:`スプール割り当て不足`,billingChargeFailedLabel:`請求処理エラー`,billingChargeFailedDescription:`印刷コストを記録できなかった場合に通知します`,missingSpoolAssignmentDescription:`印刷開始時に必要トレイへスプールが未割り当ての場合に通知`,printFailed:`印刷失敗`,printStopped:`印刷停止`,progressMilestones:`進捗マイルストーン`,progressMilestonesDescription:`25%、50%、75%で通知`,printerOffline:`プリンターオフライン`,printerError:`プリンターエラー`,aiFailureDetection:`AI 故障検出`,aiFailureDetectionDescription:`Obico AI が印刷の不具合の可能性を検出したときに通知`,lowFilamentLabel:`フィラメント残量低下`,maintenanceDue:`メンテナンス期限`,maintenanceDueDescription:`メンテナンスが必要な場合に通知`,amsHumidityHigh:`AMS湿度高`,amsHumidityHighDescription:`通常AMSの湿度がしきい値を超過`,amsTemperatureHigh:`AMS温度高`,amsTemperatureHighDescription:`通常AMSの温度がしきい値を超過`,amsDryingSuspendedTitle:`自動乾燥の停止`,amsDryingSuspendedDescription:`湿度がしきい値を下回らなかったため、AMS ユニットの自動乾燥を中止しました`,amsHtHumidityHigh:`AMS-HT湿度高`,amsHtHumidityHighDescription:`AMS-HTの湿度がしきい値を超過`,amsHtTemperatureHigh:`AMS-HT温度高`,amsHtTemperatureHighDescription:`AMS-HTの温度がしきい値を超過`,inventoryAlerts:`在庫アラート`,stockReorderAlert:`発注アラート`,stockReorderAlertDescription:`SKUが発注点に達しました`,stockBreakAlert:`在庫切れアラート`,stockBreakAlertDescription:`入荷前に在庫が枯渇する見込みです`,jobAdded:`ジョブ追加`,jobAddedDescription:`キューにジョブが追加されました`,jobAssigned:`ジョブ割り当て`,jobAssignedDescription:`モデルベースのジョブがプリンターに割り当てられました`,jobStarted:`ジョブ開始`,jobStartedDescription:`キュージョブの印刷が開始されました`,jobWaiting:`ジョブ待機中`,jobWaitingDescription:`フィラメントまたはプリンター待ちのジョブ`,jobSkipped:`ジョブスキップ`,jobSkippedDescription:`ジョブがスキップされました（前のジョブが失敗）`,jobFailed:`ジョブ失敗`,jobFailedDescription:`ジョブの開始に失敗しました`,queueComplete:`キュー完了`,queueCompleteDescription:`すべてのキュージョブが完了しました`,quietHours:`静音時間`,noNotificationsDuring:`この時間帯は通知を送信しません`,editProviderToChangeQuietHours:`プロバイダーを編集して静音時間を変更`,dailyDigest:`デイリーダイジェスト`,batchNotifications:`通知をまとめて1日のサマリーとして送信`,sendAt:`{{time}}に送信`,editProviderToChangeDigestTime:`プロバイダーを編集してダイジェスト時刻を変更`,edit:`編集`,deleteProvider:`通知プロバイダーを削除`,deleteConfirm:`"{{name}}"を削除してもよろしいですか？この操作は取り消せません。`,delete:`削除`,addTitle:`通知プロバイダーを追加`,editTitle:`通知プロバイダーを編集`,nameLabel:`名前 *`,namePlaceholder:`マイ通知`,providerTypeLabel:`プロバイダータイプ *`,configuration:`設定`,testConfiguration:`設定をテスト`,printerFilter:`プリンターフィルター`,onlyFromPrinter:`このプリンターからのイベントのみ通知を送信`,quietHoursDnd:`静音時間（おやすみモード）`,quietStart:`開始`,quietEnd:`終了`,dailyDigestLabel:`デイリーダイジェスト`,sendDigestAt:`ダイジェスト送信時刻`,digestCollected:`イベントが収集され、この時刻にまとめて送信されます`,notificationEvents:`通知イベント`,progressPercent:`（25%、50%、75%）`,bedCooledAfterPrint:`（印刷完了後）`,haSensorAlert:`プリンターセンサーアラート`,haSensorAlertDescription:`（連携した Home Assistant センサーに注意が必要です）`,locationHaSensorAlert:`保管場所センサーアラート`,locationHaSensorAlertDescription:`（保管場所に連携した Home Assistant センサーに注意が必要です）`,eventPriority:{sectionTitle:`ntfy 優先度`,helpNtfy:`有効な各イベントに優先度を選択してください。ntfy はこれを使って通知の挙動（音、表示、プッシュ動作）を切り替えます。ここで設定していないレベルは ntfy サーバーのデフォルトを使用します。`,min:`最小`,low:`低`,default:`デフォルト`,high:`高`,urgent:`緊急`},cancel:`キャンセル`,save:`保存`,add:`追加`,nameRequired:`名前は必須です`,fieldRequired:`{{field}}は必須です`,haDataInvalid:`Dataフィールドは有効なJSONオブジェクトである必要があります（例: {"priority": "high", "ttl": 0}）`,phoneNumber:`電話番号`,apiKey:`APIキー`,serverUrl:`サーバーURL`,topic:`トピック`,authToken:`認証トークン`,userKey:`ユーザーキー`,appToken:`アプリトークン`,priority:`優先度`,pushoverRetry:`緊急再通知 (秒)`,pushoverExpire:`緊急有効期限 (秒)`,botToken:`ボットトークン`,chatId:`チャットID`,telegramThreadId:`フォーラムトピック ID`,telegramThreadIdHelp:`任意。フォーラムグループ内の特定のトピックに送信します。トピックリンクの末尾の数字です (t.me/c/.../25)。空欄の場合は General トピックに送信されます。`,telegramThreadIdInvalid:`フォーラムトピック ID は数値で入力してください。`,smtpServer:`SMTPサーバー`,smtpPort:`SMTPポート`,security:`セキュリティ`,authentication:`認証`,username:`ユーザー名`,password:`パスワード`,fromEmail:`送信元メール`,toEmail:`宛先メール`,webhookUrl:`WebhookのURL`,payloadFormat:`ペイロード形式`,authorization:`認可`,titleFieldName:`タイトルフィールド名`,messageFieldName:`メッセージフィールド名`,editTemplate:`テンプレートを編集: {{name}}`,titleLabel:`タイトル`,bodyLabel:`本文`,titlePlaceholder:`通知タイトル...`,bodyPlaceholder:`通知本文...`,availableVariables:`利用可能な変数`,clickToInsert:`クリックして本文のカーソル位置に挿入`,livePreview:`ライブプレビュー`,hide:`非表示`,show:`表示`,loadingPreview:`プレビューを読み込み中...`,enterTemplateContent:`テンプレートの内容を入力するとプレビューが表示されます`,titlePreview:`タイトル:`,bodyPreview:`本文:`,resetToDefault:`デフォルトにリセット`,titleRequired:`タイトルは必須です`,bodyRequired:`本文は必須です`,notificationLog:`通知ログ`,showFailedOnly:`失敗のみ`,last24Hours:`過去24時間`,last7Days:`過去7日間`,last30Days:`過去30日間`,last90Days:`過去90日間`,justNow:`たった今`,noFailedNotifications:`失敗した通知はありません`,noNotificationsLogged:`記録された通知はありません`,unknownProvider:`不明なプロバイダー`,logTitle:`タイトル`,logMessage:`メッセージ`,logError:`エラー`,logProvider:`プロバイダー: {{type}}`,logTime:`時刻: {{time}}`,refresh:`更新`,clearOld:`古いものを削除`,statsSummary:`過去{{days}}日間:`,statsNotifications:`通知`,statsSent:`{{count}}件送信`,statsFailed:`{{count}}件失敗`,eventTypes:{print_start:`印刷開始`,print_complete:`印刷完了`,print_failed:`印刷失敗`,print_stopped:`印刷停止`,print_progress:`進捗`,printer_offline:`プリンターオフライン`,printer_error:`プリンターエラー`,filament_low:`フィラメント残量低下`,maintenance_due:`メンテナンス期限`,test:`テスト`},userEmail:{title:`通知`,emailNotifications:`メール通知`,emailNotificationsDesc:`自分の印刷ジョブに対してメール通知を受け取ります。メールは高度な認証で設定されたSMTP設定を使用して送信されます。`,sendingTo:`通知の送信先`,noEmailWarning:`アカウントにメールアドレスが設定されていません。管理者に連絡して追加してもらってください。`,printJobNotifications:`印刷ジョブ通知`,printJobNotificationsDesc:`送信した印刷ジョブのどのイベントでメール通知を送るかを選択します。`,printJobStarts:`印刷ジョブ開始`,printJobStartsDesc:`印刷ジョブが開始されたときに通知を受け取る。`,printJobFinishes:`印刷ジョブ完了`,printJobFinishesDesc:`印刷ジョブが正常に完了したときに通知を受け取る。`,printErrors:`印刷エラー`,printErrorsDesc:`印刷ジョブが失敗またはエラーが発生したときに通知を受け取る。`,printJobStops:`印刷ジョブ停止`,printJobStopsDesc:`印刷ジョブがキャンセルまたは停止されたときに通知を受け取る。`,saveSuccess:`通知設定を保存しました。`,saveError:`通知設定の保存に失敗しました。`}},richTextEditor:{bold:`太字`,italic:`斜体`,underline:`下線`,bulletList:`箇条書きリスト`,numberedList:`番号付きリスト`,alignLeft:`左揃え`,alignCenter:`中央揃え`,alignRight:`右揃え`,addLink:`リンクを追加`,removeLink:`リンクを削除`},externalLinks:{title:`サイドバーリンク`,sidebarLayout:`サイドバー`,sidebarLayoutDescription:`組み込みページの表示/非表示を切り替え、外部リンクを追加し、項目をドラッグしてサイドバーナビゲーションを並べ替えます。`,systemPages:`Bambuddyページ`,externalLinks:`外部リンク`,visibleInSidebar:`サイドバーに表示`,hiddenFromSidebar:`サイドバーで非表示`,requiredInSidebar:`サイドバーで必須`,hidePage:`ページを非表示`,showPage:`ページを表示`,settingsCannotBeHidden:`設定は非表示にできません`,noLinksConfigured:`外部リンクが設定されていません`,deleteLink:`リンクを削除`,removeCustomIcon:`カスタムアイコンを削除`,openInNewTab:`新しいタブで開く`,placeholders:{linkName:`マイリンク`}},keyboardShortcuts:{title:`キーボードショートカット`,navigation:`ナビゲーション`,archivesSection:`アーカイブ`,kProfilesSection:`Kプロファイル`,generalSection:`全般`,shortcuts:{goToPrinters:`プリンターへ移動`,goToArchives:`アーカイブへ移動`,goToQueue:`キューへ移動`,goToStats:`統計へ移動`,goToProfiles:`クラウドプロファイルへ移動`,goToSettings:`設定へ移動`,focusSearch:`検索にフォーカス`,openUploadModal:`アップロードモーダルを開く`,clearSelection:`選択をクリア / 入力をぼかす`,contextMenu:`カードのコンテキストメニュー`,refreshProfiles:`プロファイルを更新`,newProfile:`新しいプロファイル`,exitSelectionMode:`選択モードを終了`,showHelp:`このヘルプを表示`},footer:`Escキーを押すか外側をクリックして閉じます`},notificationLog:{title:`通知ログ`,events:{printStarted:`印刷開始`,printComplete:`印刷完了`,printFailed:`印刷失敗`,printStopped:`印刷停止`,progress:`進捗`,printerOffline:`プリンターオフライン`,printerError:`プリンターエラー`,lowFilament:`フィラメント残量低下`,maintenanceDue:`メンテナンス期限`,test:`テスト`},timeAgo:{justNow:`たった今`,minutesAgo:`{{minutes}}分前`,hoursAgo:`{{hours}}時間前`}},restoreBackup:{title:`バックアップを復元`,restoring:`復元中...`,restoreComplete:`復元完了`,restoreFailed:`復元失敗`,importSettings:`バックアップファイルから設定をインポート`,pleaseWait:`データの復元中です。しばらくお待ちください`,clickToSelect:`クリックしてバックアップファイルを選択（.jsonまたは.zip）`,howDuplicateHandling:`重複の処理方法:`,categories:{printers:`プリンター`,smartPlugs:`スマートプラグ`,notificationProviders:`通知プロバイダー`,filaments:`フィラメント`,archives:`アーカイブ`,pendingUploads:`保留中のアップロード`,settingsTemplates:`設定とテンプレート`},matchingInfo:{printers:`シリアル番号で照合`,smartPlugs:`IPアドレスで照合`,notificationProviders:`名前で照合`,filaments:`名前+タイプ+ブランドで照合`,archives:`コンテンツハッシュで照合`,pendingUploads:`ファイル名で照合`,settingsTemplates:`常に上書き`},replaceExisting:`既存データを置き換え`,keepExisting:`既存データを保持`,replaceDescription:`既に存在するアイテムをバックアップデータで上書き`,keepDescription:`まだ存在しないアイテムのみを復元`,caution:`注意:`,cautionText:`上書きすると現在の構成がバックアップデータに置き換えられます。セキュリティ上の理由から、プリンターのアクセスコードは上書きされません。`,itemsRestored:`復元されたアイテム`,itemsSkipped:`スキップされたアイテム`,restored:`復元済み`,skipped:`スキップ（既に存在）`,filesLabel:`ファイル（3MF、サムネイルなど）`,newApiKeysGenerated:`新しいAPIキーが生成されました`,newApiKeysWarning:`これらのキーは一度だけ表示されます。今すぐコピーしてください！`,processingBackup:`バックアップファイルを処理中...`,noDataFound:`バックアップファイルに復元するデータが見つかりませんでした。`,failedToRestore:`バックアップの復元に失敗しました。ファイル形式を確認してください。`},backupExport:{title:`バックアップをエクスポート`,selectData:`含めるデータを選択`,selectAll:`すべて選択`,selectNone:`なし`,categoryDescriptions:{settings:`言語、テーマ、更新設定`,notifications:`ntfy、Pushover、Discordなど`,templates:`カスタムメッセージテンプレート`,smartPlugs:`Tasmotaプラグ設定`,externalLinks:`サイドバーの外部サービスへのリンク`,printers:`プリンター情報（アクセスコード除外）`,plateDetection:`空プレート参照画像`,filaments:`フィラメントの種類とコスト`,maintenance:`カスタムメンテナンススケジュール`,archives:`すべての印刷データ+ファイル（3MF、サムネイル、写真）`,projects:`プロジェクト、BOMアイテム、添付ファイル`,pendingUploads:`仮想プリンターアップロード待機中`,apiKeys:`Webhook APIキー（インポート時に新しいキーが生成されます）`},requiresPrinters:`プリンターを選択する必要があります`,zipFileWarning:`ZIPファイルが作成されます。`,zipFileDescription:`すべての3MFファイル、サムネイル、タイムラプス、写真が含まれます。これには時間がかかり、大きなファイルになる可能性があります。`,includeAccessCodes:`アクセスコードを含める`,includeAccessCodesDescription:`別のマシンへの転送用`,includeAccessCodesWarning:`アクセスコードはプレーンテキストで含まれます。このバックアップファイルを安全に保管してください！`,categoriesSelected:`{{selectedCount}}カテゴリー選択済み`},pendingUploads:{placeholders:{notes:`この印刷に関するメモを追加...`},discardUpload:`アップロードを破棄`,archiveAllUploads:`すべてのアップロードをアーカイブ`,discardAllUploads:`すべてのアップロードを破棄`,archive:`アーカイブ`,timeAgo:{justNow:`たった今`,minutesAgo:`{{minutes}}分前`,hoursAgo:`{{hours}}時間前`,daysAgo:`{{days}}日前`}},apiBrowser:{placeholders:{requestBody:`JSONリクエストボディ...`,searchEndpoints:`エンドポイントを検索...`}},configureAmsSlot:{title:`AMSスロットの設定`,slotConfigured:`スロットを設定しました！`,configuringSlot:`スロットを設定中：`,slotLabel:`{{ams}} スロット {{slot}}`,searchPresets:`プリセットを検索...`,colorPlaceholder:`色名またはHex（例: 茶色、FF8800）`,clearCustomColor:`カスタム色をクリア`,noCloudPresets:`クラウドプリセットがありません。Bambu Cloudにログインして同期してください。`,noPresetsAvailable:`プリセットがありません。Bambu Cloudにログインするか、ローカルプロファイルをインポートしてください。`,noMatchingPresets:`一致するプリセットが見つかりません。`,custom:`カスタム`,builtin:`内蔵`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`設定をプリンターに送信しました`,filamentProfile:`フィラメントプロファイル`,kProfileLabel:`Kプロファイル（Pressure Advance）`,filteringFor:`フィルター中: {{material}}`,noKProfile:`Kプロファイルなし（デフォルト0.020を使用）`,noMatchingKProfiles:`一致するKプロファイルが見つかりません。デフォルトK=0.020が使用されます。`,otherKProfiles:`このプリンターの他のKプロファイル`,selectFilamentFirst:`まずフィラメントプロファイルを選択してください`,kFromCalibration:`K={{value}}（プリンターキャリブレーションから）`,customColorLabel:`カスタム色（オプション）`,presetColors:`{{name}}の色：`,showLessColors:`色を減らす`,showMoreColors:`色をもっと表示`,clear:`クリア`,hexLabel:`16進: #{{hex}}`,resetting:`リセット中...`,resetSlot:`スロットをリセット`,cancel:`キャンセル`,configuring:`設定中...`,configureSlot:`スロットを設定`},githubBackup:{title:`Gitバックアップ`,history:`履歴`,downloadBackup:`バックアップをダウンロード`,restoreBackup:`バックアップを復元`,noBackupsYet:`バックアップはまだありません`},emailSettings:{placeholders:{fromName:`Bambuddy`}},tagManagement:{searchTags:`タグを検索...`,renameTag:`タグ名を変更`,deleteTag:`タグを削除`},notificationTemplates:{placeholders:{title:`通知タイトル...`,body:`通知本文...`}},batchTag:{placeholders:{newTag:`新しいタグを入力...`}},photoGallery:{deletePhoto:`写真を削除`},filamentHoverCard:{copySpoolUuid:`スプールUUIDをコピー`},kProfilesView:{hasNote:`メモあり`,copyProfile:`プロファイルをコピー`},layout:{openMenu:`メニューを開く`,noPermissionSystemInfo:`システム情報を表示する権限がありません`},dashboard:{dragToReorder:`ドラッグして並べ替え`,hideWidget:`ウィジェットを非表示`},notificationProviderCard:{deleteNotificationProvider:`通知プロバイダーを削除`},fileManagerModal:{closeFileManager:`ファイルマネージャーを閉じる`,sortFiles:`ファイルを並べ替え`,goToParentFolder:`親フォルダーへ移動`,threeView:`3Dビュー`},embeddedCameraViewer:{refreshStream:`ストリームを更新`,close:`閉じる`,zoomOut:`ズームアウト`,resetZoom:`ズームをリセット`,zoomIn:`ズームイン`,dragToResize:`ドラッグしてサイズ変更`},timelapseViewer:{skipBack5s:`5秒戻る`,skipForward5s:`5秒進む`},notificationProviders:{descriptions:{email:`SMTP電子メール通知`,telegram:`Telegramボット経由の通知`,discord:`Webhookを介してDiscordチャンネルに送信`,ntfy:`無料でセルフホスト可能なプッシュ通知`,pushover:`シンプルで信頼性の高いプッシュ通知`,callmebot:`CallMeBot経由の無料WhatsApp通知`,webhook:`任意のURLへのジェネリックHTTP POST`}},logViewer:{searchPlaceholder:`メッセージまたはロガー名を検索...`,noLogEntries:`ログエントリが見つかりません`},switchbarPopover:{noSwitchesInSwitchbar:`スイッチバーにスイッチがありません`},projectPageModal:{placeholders:{title:`タイトル`,designer:`デザイナー`,license:`ライセンス`,description:`説明を入力...`,profileTitle:`プロファイルタイトル`,profileDescription:`プロファイルの説明...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`待機中`,justNow:`たった今`,now:`今すぐ`,minsAgo:`{{count}}分前`,inMins:`あと{{count}}分`,hoursAgo:`{{count}}時間前`,inHours:`あと{{count}}時間`,daysAgo:`{{count}}日前`,inDays:`あと{{count}}日`},spoolbuddy:{nav:{dashboard:`ダッシュボード`,ams:`AMS`,inventory:`インベントリ`,writeTag:`書込み`,settings:`設定`},status:{nfcReady:`NFC準備完了`,nfcOff:`NFCオフ`,offline:`オフライン`,online:`オンライン`,noPrinters:`プリンターなし`,deviceOffline:`デバイスオフライン`,waitingConnection:`デバイス接続を待っています...`,systemReady:`システム準備完了`,status:`ステータス`},dashboard:{readyToScan:`スキャン準備完了`,idleMessage:`スプールを計量台に置いて識別します`,nfcHint:`NFCタグは自動的に読み取られます`,device:`デバイス`,syncWeight:`重量同期`,weightSynced:`同期完了！`,unknownTag:`不明なタグ`,newTag:`新しいタグを検出`,onScale:`計量中`,linkSpool:`スプールにリンク`,linkTagTitle:`タグをスプールにリンク`,linkTag:`タグをリンク`,selectSpool:`このタグにリンクするスプールを選択:`,noUntagged:`タグなしのスプールが見つかりません`,tagDetected:`タグ検出`,noTag:`タグなし`,tagId:`タグ`,grossWeight:`総重量`,spoolSize:`スプールサイズ`,close:`閉じる`,currentSpool:`現在のスプール`,plateReady:`プレート準備完了: {{name}}`,plateReadyLabel:`片付け待ちプレート`,plateClearAction:`片付け`,plateClearedToast:`プレートを片付け済みにしました`,plateClearFailed:`プレートを片付け済みにできませんでした`},modal:{spoolDetected:`スプール検出`,assignToAms:`AMSに割り当て`,syncWeight:`重量同期`,weightSynced:`同期完了！`,syncing:`同期中...`,newTagDetected:`新しいタグを検出`,addToInventory:`インベントリに追加`,assignToAmsTitle:`AMSに割り当て`,selectSlot:`スロットを選択`,assign:`割り当て`,assigning:`割り当て中...`,assignSuccess:`割り当て完了！`,assignPendingInsert:`割り当てました。スプールを挿入したときにスロットが設定されます。`,assignError:`スプールの割り当てに失敗しました。再試行してください。`,noPrinterSelected:`プリンターを選択...`,noAmsDetected:`このプリンターにAMSが検出されません`,slot:`スロット`},weight:{noReading:`読み取りなし`,stable:`安定`,measuring:`計測中...`,tare:`風袋引き`,calibrate:`キャリブレーション`},spool:{remaining:`残量`,material:`素材`,brand:`ブランド`,color:`色`,coreWeight:`コア`,labelWeight:`ラベル`,scaleWeight:`計量`,netWeight:`正味`,lastUsed:`最終使用`,unknownColor:`不明な色`},ams:{noData:`AMSが検出されません`,connectAms:`AMSを接続してスロットを表示`,noPrinter:`プリンター未選択`,selectPrinter:`上部バーからプリンターを選択`,printerDisconnected:`プリンター切断`,humidity:`湿度`,level:`レベル`,active:`アクティブ`,slot:`スロット`,empty:`空`},inventory:{search:`スプールを検索...`,empty:`インベントリにスプールがありません`,noResults:`一致するスプールがありません`,spools:`スプール`,addSpool:`スプール追加`},settings:{tabDevice:`デバイス`,tabDisplay:`ディスプレイ`,tabScale:`計量`,tabUpdates:`アップデート`,nfcReader:`NFCリーダー`,type:`タイプ`,connection:`接続`,notConnected:`該当なし`,deviceInfo:`デバイス情報`,hostname:`ホスト`,uptime:`稼働時間`,brightness:`明るさ`,saved:`保存済み`,noBacklight:`DSIバックライトが検出されませんでした。明るさ制御にはDSIディスプレイが必要です。`,screenBlank:`画面オフタイムアウト`,screenBlankDesc:`操作がないと画面がオフになります。タッチで復帰。`,displayNote:`明るさはソフトウェアフィルターとして適用されます。`,scaleCalibration:`計量キャリブレーション`,currentWeight:`現在の重量`,tareOffset:`風袋`,calFactor:`係数`,knownWeight:`既知の重量`,calStep1:`計量台からすべてのアイテムを取り除き、ゼロ設定を押してください。`,calStep2:`既知の重量を計量台に置いてください。`,setZero:`ゼロ設定`,calibrateNow:`キャリブレーション`,calibrated:`キャリブレーション済み`,tareSet:`風袋コマンドを送信しました。デバイスを待っています...`,tareComplete:`風袋が完了しました！`,tareTimedOut:`風袋がタイムアウトしました — SpoolBuddy デーモンは起動していますか？`,tareFailed:`風袋コマンドの送信に失敗しました`,zeroSet:`ゼロ点を設定しました。既知の重量を計量台に置いてください。`,calibrationDone:`キャリブレーション完了！`,calibrationFailed:`キャリブレーションに失敗しました`,lastCalibrated:`最終キャリブレーション`,stable:`安定`,settling:`安定化中...`,firmware:`ファームウェア`,scale:`計量`,noDevice:`SpoolBuddyデバイスが見つかりません`,daemonVersion:`デーモンバージョン`,currentVersion:`現在`,versionPending:`デーモンを待っています...`,checking:`確認中...`,checkUpdates:`アップデートを確認`,updateAvailable:`アップデートあり`,updateInstructions:`SSH経由で更新：SpoolBuddyインストールスクリプトを実行してください。`,upToDate:`最新です`,includeBeta:`ベータ版を含む`,systemConfig:`バックエンドと認証`,backendUrl:`BambuddyバックエンドURL`,apiToken:`APIトークン`,apiTokenPlaceholder:`APIトークンを入力`,saveConfig:`設定を保存`,systemQueued:`設定をキューに追加しました。`,systemFieldsRequired:`バックエンドURLは必須です。`,nfcDiagnostic:`NFC診断`,scaleDiagnostic:`スケール診断`,readTagDiagnostic:`タグ読み取り診断`,testNfc:`リーダーをテスト`,testScale:`精度をテスト`,testReadTag:`タグを読み取り`},writeTag:{tabExisting:`既存のスプール`,tabNew:`新規スプール`,tabReplace:`タグ交換`,searchPlaceholder:`素材、色、ブランドで検索...`,noUntaggedSpools:`タグなしのスプールがありません`,noTaggedSpools:`タグ付きのスプールがありません`,selectSpool:`スプールを選択し、NTAGをリーダーに置いてください`,placeTag:`NTAGをリーダーに置いてください`,tagReady:`タグ検出 — 書込み準備完了`,writeTag:`タグ書込み`,replaceTag:`タグ交換`,writing:`タグ書込み中...`,waiting:`SpoolBuddyを待機中...`,writeSuccess:`タグの書込みが完了しました！`,writeFailed:`書込み失敗`,queueFailed:`書込みコマンドのキューに失敗しました`,tryAgain:`再試行`,cancel:`キャンセル`,replaceWarning:`古いタグのリンクが解除され、新しいタグに置き換わります。`,deviceOffline:`SpoolBuddyはオフラインです`,material:`素材`,colorName:`色名`,color:`色`,brand:`ブランド`,weight:`重量 (g)`,createSpool:`スプール作成`,creating:`作成中...`,spoolCreated:`スプール作成完了！書込み準備ができました。`,createFailed:`スプールの作成に失敗しました`,incompleteDataWarning:`不完全なSpoolmanデータでタグを書き込みました`},quickMenu:{printerPower:`プリンター電源`,systemControls:`システム`,restartDaemon:`デーモン再起動`,restartBrowser:`ブラウザ再起動`,reboot:`再起動`,shutdown:`シャットダウン`,swipeToClose:`下にスワイプして閉じる`,confirmTitle:`確認`,confirmShutdown:`SpoolBuddyをシャットダウンしますか？再起動するには物理的なアクセスが必要です。`,confirmReboot:`SpoolBuddyを再起動しますか？`,confirmRestartDaemon:`SpoolBuddyデーモンを再起動しますか？NFCとスケールが一時的に使用できなくなります。`,confirmRestartBrowser:`キオスクブラウザを再起動しますか？画面が一時的に暗くなります。`,confirm:`確認`,confirmPlugOn:`{{name}}をオンにしますか？`,confirmPlugOff:`{{name}}をオフにしますか？`,turnOn:`オン`,turnOff:`オフ`}},diagnostic:{modalTitle:`接続診断 — {{name}}`,running:`診断を実行中...`,runningElapsed:`診断を実行中... ({{elapsed}}秒)`,waitingForReportHint:`プリンターがステータスレポートを送信するのを待っています — 最大 {{max}} 秒かかる場合があります。`,runFailed:`診断を実行できませんでした: {{error}}`,retry:`再実行`,runButton:`診断を実行`,sectionTitle:`接続診断`,sectionDescription:`プリンターが接続できない、または印刷できない原因を確認します — ポートの到達性、LAN開発者モード、Dockerネットワークモード、認証情報。`,noPrinters:`プリンターが設定されていません。`,overall:{ok:`問題は見つかりませんでした — プリンター接続は正常のようです。`,warnings:`プリンターは動作するはずですが、いくつかの点に注意が必要です。`,problems:`プリンターが接続できない、または印刷できない原因となる問題が見つかりました。`},check:{port_mqtt:{title:`制御ポート (MQTT 8883)`,pass:`到達可能 — プリンターは制御接続を受け付けています。`,fail:`ポート8883に到達できません。プリンターの電源が切れている、IPアドレスが異なる、またはファイアウォールがブロックしています。プリンターのIPと、ポート8883が何にもブロックされていないことを確認してください。`},port_ftps:{title:`ファイル転送ポート (FTPS 990)`,pass:`到達可能 — 印刷ファイルの送信は機能します。`,warn:`ポート990に到達できません。監視は引き続き機能する場合がありますが、プリンターへの印刷送信は失敗します。ポート990がブロックされていないことを確認してください。`,warn_no_tls:`ポート990は開いていますが、プリンターのファイルサービスがTLSハンドシェイクを完了しません。印刷ファイル、サムネイル、タイムラプスを取得できないため、アーカイブは空のままになります。プリンターを再起動してください — ポートのブロックを解除しても解決しません。`},external_storage:{title:`送信ファイルを外部ストレージに保存 (インストール手順4)`,pass:`プリンターはこのオプションが有効と報告しています — 送信されたファイルはSDカードに保存され、アーカイブにはサムネイルとスライサーメタデータが含まれます。`,fail:`プリンターはこのオプションが無効と報告しています。「送信ファイルを外部ストレージに保存」を有効にしてください — 新しいファームウェア (P2S 01.02 / Bambu Studio 2.6以降) ではプリンター本体の印刷設定にトグルがあります。古いバージョンでは Bambu Studio / OrcaSlicer のデバイスタブにあります。この設定がないと、アーカイブされた印刷にはサムネイルもスライサーメタデータも残りません。`,skip:`未確認 — アクティブなMQTT接続が必要です。古いスライサーでこの設定がスライサー側のみに存在する場合、プリンターはそれを報告しないため、オプションが無効でもこのチェックは通過します — インストール手順4を手動で確認してください。`,skip_unsupported_model:`このモデルにはSDスロットがありますが、オプションを有効にする方法がありません — 現在のP1シリーズのファームウェアはBambu Studioにトグルを表示せず、プリンターに画面もありません。ここで修正すべきことはありません。Bambu Labがファームウェアで対応するまで、アーカイブされた印刷にはサムネイルやスライサーのメタデータが欠ける場合があります。`,fail_no_media:`オプションは有効ですが、プリンターのスロットにカードもUSBメモリも検出されないため、送信ファイルの保存先がありません。挿入して再度印刷してください。それまでアーカイブされる印刷にはサムネイルとスライサーメタデータがありません。`,warn_internal_storage:`オプションは有効でストレージも装着されていますが、直近の印刷は Bambuddy が読み取れないプリンターの内部ストレージに保存されました。H2 シリーズ、P2S、X2D では、この設定に関係なく Bambu Studio の「印刷」ボタンは常にそちらへ送信します。印刷は名前と時間付きでアーカイブされますが、サムネイルとスライサーのメタデータはありません。完全なアーカイブを残すには、Bambuddy から印刷を開始するか、OrcaSlicer でスライスするか、Bambu Studio で「送信」から「外部ストレージ」を選んだあとに印刷を開始してください。`,warn_internal_history:`オプションは有効でストレージもありますが、直近の印刷はすでにプリンター内にあったファイルから実行されました — 画面からの再印刷、Handy からの開始、または以前に送信したファイルです。そのライブラリは Bambuddy が読めない内部ストレージにあり、この印刷では何も送信されていないため、どの設定を変えても解決しません。名前と時間付きでアーカイブはされますが、サムネイルとスライサーのメタデータはありません。完全なアーカイブにするには、Bambuddy から印刷を開始するか、スライサーから送信してください。`},port_rtsps:{title:`カメラポート ({{protocol}} {{port}})`,pass:`到達可能 — カメラストリームは機能します。`,warn:`ポート{{port}}に到達できません。ライブカメラ表示は機能しません。これは印刷には影響しません。`},macos_local_network:{title:`macOS のローカルネットワーク権限`,pass:`macOS は Bambuddy のローカルネットワークへのアクセスを許可しています。`,warn_unsigned:`Bambuddy を実行している Python にコード署名がないため、macOS はローカルネットワーク権限を結び付ける対象を持てず、プリンターへの接続をエラーも確認ダイアログもなく破棄します。署名を行う Bambuddy の更新スクリプト (install/update_macos.sh) を実行してから、Bambuddy を再起動してください。インタープリター: {{executable}}`,warn_permission:`プリンターの電源が入っていてこのアドレスで到達できる場合は、システム設定 > プライバシーとセキュリティ > ローカルネットワーク を開き、Bambuddy の Python が有効になっているか確認してください。無効だと macOS はローカル接続を無言で破棄します。また Python を更新すると以前の許可が引き継がれないことがあります。`},network_mode:{title:`コンテナのネットワークモード`,genericRuntime:`コンテナ`,pass:`{{runtime}} でホストネットワークを使用して実行中です。`,warn:`Bambuddy は {{runtime}} でブリッジネットワークを使用して実行されています。プリンター検出と仮想プリンターにはホストネットワークが必要です — ホストネットワークでコンテナを再作成してください（docker-compose では "network_mode: host"、Podman では "--network=host"）。`,skip:`コンテナで実行されていません — 該当しません。`,skip_unknown:`Bambuddy は {{runtime}} で実行されていますが、ネットワークモードを判別できませんでした。プリンター検出や仮想プリンターが動作しない場合は、ホストネットワークでコンテナを再作成してください。`,skip_system_container:`Bambuddy は {{runtime}} のシステムコンテナで実行されており、仮想マシンと同様に LAN 上にあります — 該当しません。`},subnet:{title:`ネットワークサブネット`,pass:`プリンターとBambuddyは同じサブネットにあります。`,warn:`プリンター ({{printer_ip}}) とBambuddy ({{host_ip}}) は異なるサブネットにあります。サブネット間のルーティングが設定されていない限り、互いに到達できない可能性があります。`,skip:`サブネットを判定できませんでした — スキップしました。`},mqtt_auth:{title:`プリンター認証情報`,pass:`プリンターが接続を受け入れました。`,fail:`プリンターには到達できますが、Bambuddy は接続されていません。アクセスコードまたはシリアル番号が間違っている可能性が高いです — アクセスコードは LAN のみモードや開発者モードを切り替えるたびに変わるため、プリンター画面から再度コピーしてください。再起動中のプリンターや、同時接続数の上限に達しているプリンターでも同じ表示になります。`,fail_auth_rejected:`プリンターが Bambuddy の認証情報を拒否しました。アクセスコードまたはシリアル番号が間違っています — アクセスコードは LAN のみモードや開発者モードを切り替えるたびに変わります。プリンター画面から再度コピーし、プリンター設定に保存してください。`,skip:`未確認 — プリンターに到達できませんでした。`},developer_mode:{title:`LAN開発者モード`,pass:`開発者モードは有効です。`,fail:`プリンターの開発者モードがオフです。プリンターのLAN設定で有効にし、OKで確定してください。これがないと印刷は開始されません。`,skip:`確認できませんでした — プリンターへのアクティブな接続が必要です。`},printer_publishing:{title:`プリンターがステータスを送信中`,pass:`プリンターはステータス更新を送信しています — AMS、フィラメント、Kプロファイルがスライサーに正しくミラーされます。`,fail:`MQTTブローカーは接続を受け付けましたが、プリンターはステータスレポートを一切送信していません。ほぼ常にシリアル番号の誤りまたは大文字小文字の不一致が原因です — device/<serial>/report トピックは大文字小文字を区別します。プリンター設定のシリアル番号をプリンター本体の画面表示と照合してください。`,skip:`確認できませんでした — プリンターへのアクティブな接続が必要です。`}}},systemHealth:{sectionTitle:`システムの状態`,sectionDescription:`最近のログから既知の問題を検出します。サポートに問い合わせる前に、多くは自分で解決できます。`,rescan:`再スキャン`,clean:`直近 {{times}} 件のログに既知の問題は見つかりませんでした。`,logUnavailable:`ファイルへのログ記録が無効になっているため、ログをスキャンできません。このチェックを使うにはファイルログを有効にしてください。`,learnMore:`対処方法`,fixLabel:`対処:`,occurrences:`{{times}} 回発生 — 最終 {{lastSeen}}`,category:{layer8:`自分で解決できます`,environment:`環境`,bug:`報告してください`},signature:{"ftp-auth-rejected":{name:`プリンターがアクセスコードを拒否しました`,cause:`プリンターがファイル転送のログインを拒否しました。アクセスコードが間違っているか、開発者モードの切り替え後に変更されています。`,fix:`プリンター画面（LAN設定）からアクセスコードをコピーし直し、Bambuddy のプリンター設定で更新してください。`},"ftp-connection-timeout":{name:`ファイル転送の接続がタイムアウトしました`,cause:`Bambuddy がプリンターのファイル転送ポート（FTPS 990）に到達できませんでした。ポートがブロックされているか、プリンターの電源が切れているか、別のサブネットにあります。`,fix:`Bambuddy とプリンターの間でポート 990 がブロックされていないこと、両者が同じネットワークにあることを確認してください。`},"ftp-ssl-error":{name:`セキュアなファイル転送のハンドシェイクに失敗しました`,cause:`プリンターのファイルサービスがポート 990 で TLS を使わずに応答しました。プリンター側のファイルサーバーがハングした状態で、ファイアウォールやファームウェアの問題ではありません。`,fix:`プリンターを再起動してください。それまで印刷ファイル・サムネイル・タイムラプスは取得できませんが、印刷自体には影響ありません。`},"bambu-cloud-captcha":{name:`Bambu Cloud が CAPTCHA を要求しています`,cause:`Bambu の不正利用対策がこのネットワークを検証しているため、Bambu Cloud へのサインインを完了できません。アカウントやこのインストール環境ではなく、グローバル IP アドレスに紐づいた制限です。`,fix:`待つのが基本です。通常は数時間で解除され、サインインを繰り返すと長引きます。それまでは、ブラウザーのセッションから取得したアクセストークンでサインインしてください。`},"mqtt-connection-flapping":{name:`プリンター接続が繰り返し切断されます`,cause:`制御接続（MQTT 8883）が切断と再接続を繰り返しています。通常はネットワークが弱いか、ポートが部分的にブロックされていることが原因です。`,fix:`プリンター付近の Wi-Fi 信号を確認し、できれば有線接続を使用し、ポート 8883 が安定して到達できることを確認してください。`},"camera-connection-refused":{name:`カメラ映像に接続できません`,cause:`ポート RTSPS 322 でライブカメラに到達できませんでした。ポートがブロックされているか、プリンターのカメラまたは LAN ライブビューが無効になっています。`,fix:`プリンターのカメラと LAN ライブビューを有効にし、ポート 322 がブロックされていないか確認してください。これは印刷には影響しません。`},"database-locked":{name:`データベースの書き込み競合`,cause:`負荷時に SQLite データベースで "database is locked" エラーが発生しています。複数のプリンターを同時に使用する場合によく起こります。`,fix:`Bambuddy を外部の PostgreSQL データベースに切り替えてください。ドキュメントの PostgreSQL ガイドを参照してください。`}}},vpDiagnostic:{title:`セットアップチェック — {{name}}`,runButton:`セットアップチェックを実行`,running:`セットアップチェックを実行中...`,runFailed:`セットアップチェックを実行できませんでした: {{error}}`,retry:`再実行`,overall:{ok:`すべてのチェックに合格しました — この仮想プリンターは正しく設定されています。`,warnings:`仮想プリンターは動作するはずですが、いくつかの点に注意が必要です。`,problems:`スライサーがこの仮想プリンターを認識または使用できない理由となる問題が見つかりました。`},check:{enabled:{title:`仮想プリンターが有効`,fail:`この仮想プリンターはオフです。検出可能にするにはオンに切り替えてください。`},running:{title:`サービスが稼働中`,fail:`仮想プリンターは有効ですが、サービスが稼働していません。Bambuddy のログを確認してください — 通常はバインド IP の競合または権限エラーが原因で停止します。`},bind_interface:{title:`バインドネットワークインターフェース`,fail:`バインドインターフェースが設定されていないか、このホストに存在しなくなっています。「バインドインターフェース」のドロップダウンから現在のインターフェースを選択してください。`},access_code:{title:`アクセスコードが設定済み`,fail:`アクセスコードが設定されていません。ここで設定したものと同じ 8 文字のアクセスコードをスライサーに入力する必要があります。`},target_printer:{title:`ターゲットプリンター`,fail:`ターゲットプリンターが選択されていません。プロキシモードには転送先となる実際のプリンターが必要です。`,warn:`ターゲットプリンターは現在オフラインです — 再接続されると転送が再開されます。`},port_ftps:{title:`ファイルアップロードサービス（ポート {{port}}）`,fail:`バインド IP のポート {{port}} で待ち受けているものがないため、スライサーはファイルをアップロードできません。通常はこのインターフェースでのポート競合が原因です。`},port_mqtt:{title:`制御サービス（ポート {{port}}）`,fail:`バインド IP のポート {{port}} で待ち受けているものがないため、スライサーは接続もステータス表示もできません。`},port_bind:{title:`検出サービス（ポート {{port}}）`,fail:`バインド IP のポート {{port}} で待ち受けているものがないため、スライサーの検出ハンドシェイクが失敗します。`},privileged_ports:{title:`特権ポートへのバインド`,fail:`ポート {{port}} は 1024 未満で、このサービスにはバインドする権限がありません。上で何も待ち受けていないのはこのためです。/etc/systemd/system/bambuddy.service に AmbientCapabilities=CAP_NET_BIND_SERVICE を追加して再起動するか、"sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))" を実行してください。Docker の場合は cap_add: [NET_BIND_SERVICE] を追加します。`},certificate:{title:`TLS 証明書`,pass:`証明書の準備ができています。Bambuddy CA 証明書（上記）がスライサーの信頼ストアにインポートされていることを確認してください。`,fail:`この仮想プリンターの TLS 証明書がありません。Bambuddy のデータディレクトリが書き込み可能か確認してください。`}}},bugReport:{logHealthSummary:`ログから既知の問題が見つかりました`,logHealthIntro:`最近のログが既知の問題と一致しています。下記の対処方法をご確認ください。解決すればバグ報告なしで問題が解消する可能性があります。下からバグ報告を送ることもできます。`,title:`バグを報告`,description:`説明`,descriptionPlaceholder:`何が問題でしたか？問題を説明してください...`,email:`メールアドレス（任意）`,emailPlaceholder:`your@email.com`,emailPrivacy:`入力された場合、メールアドレスはGitHub Issueの折りたたみセクションに含まれ、メンテナーがフォローアップできるようになります。`,screenshot:`スクリーンショット`,uploadOrPaste:`画像をアップロード、貼り付け、またはドラッグ`,dataCollectedSummary:`レポートに含まれるデータは？`,dataIncluded:`含まれるもの:`,dataIncludedList:`アプリバージョン、OS、アーキテクチャ、Pythonバージョン、データベース統計（件数のみ）、プリンターモデル、ノズル数、ファームウェアバージョン、接続状態、統合状態（Spoolman、MQTT、HA）、非機密設定、ネットワークインターフェース数、Docker詳細、依存関係バージョン。`,dataNeverIncluded:`含まれないもの:`,dataNeverIncludedList:`プリンター名、シリアル番号、アクセスコード、パスワード、IPアドレス、メールアドレス、APIキー、トークン、Webhook URL、ホスト名、ユーザー名。`,submit:`送信`,startLogging:`デバッグログ開始`,stepEnableLogging:`デバッグログ有効`,stepReproduce:`問題を再現してください`,stepStopLogging:`停止してレポート送信`,stopAndSubmit:`停止して送信`,maxDuration:`{{minutes}}分後に自動停止`,stoppingLogs:`ログ収集・送信中...`,submitting:`バグレポートを送信中...`,submittingStepConnection:`プリンターの接続確認を実行中`,submittingStepVirtualPrinters:`仮想プリンターのセットアップ確認を実行中`,submittingStepLogScan:`最近のログから既知の問題をスキャン中`,submittingStepSubmit:`GitHub にレポートを送信中`,submitSuccess:`バグレポートが正常に送信されました！`,submitFailed:`バグレポートの送信に失敗しました`,diagnosticChecking:`プリンター接続を確認中...`,diagnosticHealthy:`接続チェックに合格しました — プリンターに問題は見つかりませんでした。`,diagnosticSummary:`{{total}} 台中 {{problems}} 台のプリンターに接続の問題があります`,diagnosticIntro:`1 台以上のプリンターに接続の問題があり、それが今回の問題の原因である可能性があります。下記のプリンターを展開して対処法を確認してください — それを解決すれば、バグ報告なしで問題が解決するかもしれません。下記から報告を送信することもできます。`,thankYou:`ありがとうございます！`,submitted:`バグレポートが送信されました。`,viewIssue:`Issueを表示`,closeKeepsRecording:`問題を再現している間、このパネルを閉じても構いません。記録は続行され、再度開くとここに戻ります。`,resumeRecording:`バグレポートを記録中 — {{elapsed}}。クリックして完了します。`,resumeReport:`レポートを再開`,unexpectedError:`予期しないエラーが発生しました`},failureDetection:{title:`AI 失敗検出`,description:`セルフホストされた Obico ML API で印刷を監視し、検出された失敗に自動的に対応します。`,mlUrl:`Obico ML API の URL`,mlUrlHint:`セルフホストした Obico ml_api コンテナのベース URL (例: http://192.168.1.10:3333)。`,mlToken:`ML API トークン（任意）`,mlTokenPlaceholder:`サーバーが ML_API_TOKEN なしで動作している場合は空のままにします`,mlTokenHint:`Obico ml_api コンテナの環境変数 ML_API_TOKEN と一致させる必要があります。コンテナがトークンなしで動作している場合は空のままにしてください。`,test:`テスト`,testSuccess:`ML API に接続でき、正常です。`,testSuccessTokenUnknown:`ML API に接続でき、正常です。トークンは確認できませんでした。`,testFailed:`ML API に接続できませんでした。`,sensitivity:`感度`,sensitivityLow:`低(誤検出が少ない)`,sensitivityMedium:`中(バランス型)`,sensitivityHigh:`高(早期検出、誤検出が増加)`,sensitivityHint:`警告と失敗をトリガーする信頼度のしきい値を調整します。`,action:`失敗検出時の動作`,actionNotify:`通知のみ`,actionPause:`印刷を一時停止`,actionPauseOff:`一時停止して電源を切る`,pollInterval:`ポーリング間隔(秒)`,pollIntervalHint:`印刷中に各プリンターをチェックする頻度。最小 5 秒、最大 120 秒。`,externalUrlMissing:`外部URLが設定されていません。`,externalUrlHint:`ML APIはURLでカメラスナップショットを取得します。MLAPIコンテナがBambuddyに到達できるよう、一般設定で外部URLを設定してください。`,perPrinterTitle:`監視対象プリンター`,perPrinterHint:`検出サービスが監視するプリンターを選択します。`,monitorAll:`接続されているすべてのプリンターを監視`,statusTitle:`ステータス`,serviceRunning:`サービス稼働中`,thresholds:`低 / 高しきい値`,activePrinters:`アクティブな印刷`,noActivePrints:`現在、実行中の印刷はありません。`,historyTitle:`最近の検出`,noHistory:`まだ検出はありません。`},makerworld:{title:`MakerWorld`,description:`MakerWorld モデルの URL を貼り付けると、Bambu Handy アプリを開かなくても Bambuddy から直接インポート・印刷できます。`,pasteUrlHeader:`MakerWorld からインポート`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… または任意の MakerWorld リンク`,resolveButton:`読み込む`,signInRequiredTitle:`ダウンロードには Bambu Cloud へのサインインが必要です`,signInRequiredBody:`モデルの詳細は匿名で閲覧できますが、3MF ファイルをダウンロードするには Bambu Cloud アカウントが必要です。`,signInExpiredTitle:`Bambu Cloud のサインインの有効期限が切れました`,signInExpiredBody:`Bambuddy にはサインインしたままですが、Bambu Lab が保存されたトークンを受け付けなくなったため、ダウンロードは失敗します。Bambu Cloud に再度サインインしてください。`,openCloudSettings:`Cloud 設定を開く`,untitledModel:`無題のモデル`,byCreator:`作成者: {{name}}`,downloadsCount:`ダウンロード数: {{count}}`,licensePrefix:`ライセンス`,alreadyImported:`ライブラリに登録済み`,openOnMakerworld:`MakerWorld で開く`,alreadyInLibrary:`このモデルはすでにライブラリにあります — ファイルマネージャー → MakerWorld で確認できます`,importSuccess:`{{filename}} をインポートしました — ファイルマネージャー → MakerWorld に保存済み`,platesHeader:`プレート ({{count}})`,plateDefaultName:`プレート {{n}}`,materialCount:`フィラメント {{count}} 本`,amsRequired:`AMS が必要`,slicedFor:`{{printer}}用にスライス済み`,alsoCompatible:`互換性ありとも記録: {{printers}}`,importToLibrary:`保存`,sliceIn:`保存して {{slicer}} でスライス`,disclaimer:`MakerWorld 連携はコミュニティで文書化された API エンドポイントを使用しています。Bambuddy は MakerWorld または Bambu Lab との提携・承認関係はありません。`,lastImportSuccess:`ライブラリにインポートしました`,lastImportAlreadyInLibrary:`既にライブラリに存在します`,viewInLibrary:`ファイルマネージャーで表示`,openInBambuStudio:`Bambu Studio で開く`,openInOrcaSlicer:`OrcaSlicer で開く`,importTo:`ファイルマネージャーへのインポート先`,recentImportsHeader:`最近のインポート`,phaseResolving:`解決中`,phaseDownloading:`ダウンロード中`,folderAuto:`MakerWorld (デフォルト)`,importAll:`すべてインポート`,importAllProgress:`インポート中 {{current}}/{{total}}`,openGallery:`画像ギャラリーを開く`,galleryPrev:`前の画像`,galleryNext:`次の画像`,deleteImport:`ライブラリから削除`,importDeleting:`削除中…`,importDeleted:`ライブラリから削除しました`,confirmDelete:`{{filename}} をライブラリから削除しますか？ローカルファイルは削除されますが、MakerWorld から再インポートできます。`,errors:{resolveFailed:`この MakerWorld URL を解決できませんでした。`,downloadFailed:`ダウンロードに失敗しました。もう一度お試しください。`,deleteFailed:`ライブラリからファイルを削除できませんでした。`}},gcodeViewer:{filamentSlot:`フィラメント {{n}}`,loading:`ツールパスを読み込んでいます…`,loadFailed:`このファイルの G コードを読み込めませんでした。`,showTravel:`移動（非押出）`,topLayer:`上端レイヤー`,bottomLayer:`下端レイヤー`,noSource:`プレビューするファイルが指定されていません。`,view:{filament:`フィラメント`,feature:`種別`,height:`高さ`,width:`幅`},feature:{wall:`壁`,sparseInfill:`疎インフィル`,solidInfill:`ソリッドインフィル`,bridge:`ブリッジ／オーバーハング`,support:`サポート`,skirt:`スカート／ブリム`,gapFill:`ギャップ充填`,ironing:`アイロン`,primeTower:`プライムタワー`},back:`戻る`,backToArchives:`印刷アーカイブに戻る`,backToFiles:`ファイル管理に戻る`,plates:`プレート`,plateN:`プレート {{n}}`},libraryTrash:{title:`ゴミ箱`,headerButton:`ゴミ箱`,headerTooltip:`ゴミ箱に移動したファイルを表示`,backToFiles:`ファイルマネージャーに戻る`,subtitleAdmin:`削除されたファイルは {{days}} 日間ゴミ箱に残り、その後自動的に削除されます。このビューには全ユーザーのゴミ箱が表示されます。`,subtitleUser:`削除されたファイルは {{days}} 日間ゴミ箱に残り、その後自動的に削除されます。`,loading:`ゴミ箱を読み込み中…`,loadError:`ゴミ箱を読み込めませんでした。`,empty:`ゴミ箱は空です。`,summary:`{{count}} 件 · {{size}}`,emptyTrash:`ゴミ箱を空にする`,restore:`復元`,purgeNow:`今すぐ削除`,autoPurgeIn:`{{when}} に自動削除`,days:`日`,retentionLabel:`自動削除までの期間`,selectAll:`すべて選択`,selectOne:`{{filename}} を選択`,selectionCount:`{{count}} 件選択中`,bulkRestore:`選択したものを復元`,bulkPurge:`選択したものを削除`,col:{filename:`ファイル`,folder:`フォルダ`,size:`サイズ`,deleted:`ゴミ箱に移動`,autoPurge:`自動削除`,owner:`所有者`,actions:`操作`},confirm:{purgeTitle:`完全に削除しますか？`,purgeBody:`{{filename}} はディスクから削除され、復元できません。`,emptyTitle:`ゴミ箱を空にしますか？`,emptyBody:`{{count}} 件のファイルすべてがディスクから削除されます。この操作は取り消せません。`,bulkPurgeTitle:`選択したファイルを完全に削除しますか？`,bulkPurgeBody:`選択した {{count}} 件のファイルがディスクから削除され、復元できません。`,cta:`完全に削除`},toast:{restored:`ファイルを復元しました。`,restoreFailed:`ファイルを復元できませんでした。`,purged:`ファイルを完全に削除しました。`,purgeFailed:`ファイルを削除できませんでした。`,emptied:`ゴミ箱から {{count}} 件のファイルを削除しました。`,emptyFailed:`ゴミ箱を空にできませんでした。`,retentionSaved:`自動削除を {{days}} 日に設定しました。`,retentionFailed:`保持期間の設定を保存できませんでした。`,bulkRestored:`{{count}} 件のファイルを復元しました。`,bulkPurged:`{{count}} 件のファイルを削除しました。`}},libraryPurge:{title:`古いファイルを一括削除`,headerButton:`古いファイル削除`,headerTooltip:`古いファイルをまとめてゴミ箱に移動`,description:`指定した期間より古いファイルはゴミ箱に移動されます。外部フォルダはスキップされます。自動削除までの間、ゴミ箱から復元できます。`,ageLabel:`次より古いファイルを移動`,days:`日`,includeNeverPrinted:`一度も印刷していないファイルも含める`,effectsTitle:`「削除」をクリックすると何が起こるか`,effect1:`一致するファイルはゴミ箱に移動されます。ディスクからはまだ削除されません。`,effect2:`保持期間が過ぎるまで、いつでもゴミ箱から復元できます。`,effect3:`保持期間が過ぎると、ゴミ箱クリーナーがディスクから完全に削除します。`,effect4:`外部（リンク済み）フォルダー内のファイルはスキップされます — Bambuddyは所有していないバイトを削除しません。`,previewLoading:`対象ファイル数を確認中…`,previewFailed:`プレビューを取得できませんでした。`,previewSummary:`{{count}} 件 · {{size}} がゴミ箱に移動されます`,andMore:`…ほか {{count}} 件`,warning:`ファイルはソフト削除されます — 保持期間が終了するまでゴミ箱から復元できます。`,confirmCta:`{{count}} 件をゴミ箱へ移動`,purging:`ゴミ箱へ移動中…`,toast:{success:`{{count}} 件のファイルをゴミ箱に移動しました。`,failed:`ファイルを削除できませんでした。`}},libraryAutoPurge:{enableLabel:`古いファイルを自動で一括削除`,enableDescription:`管理者の一括削除を 1 日 1 回実行します。ファイルはまずゴミ箱に移動され、すぐには削除されません。`,ageLabel:`次より古いファイルを自動削除`,ageDescription:`最短 7 日、最長 10 年。手動の「古いファイル削除」ボタンと同じ期間ルールを使用します。`,days:`日`,includeNeverPrinted:`一度も印刷していないファイルも含める`,saveFailed:`自動削除の設定を保存できませんでした。`},archivePurge:{headerButton:`古いものを削除`,headerTooltip:`古いアーカイブを一括削除`,title:`古いアーカイブを削除`,description:`古い印刷履歴をクリア。各アーカイブは最新の印刷完了に基づいてエイジングされます — アーカイブを再印刷するとエイジがリセットされるため、現在使用中の作業が削除されることはありません。`,ageLabel:`印刷されていないアーカイブを削除（過去`,days:`日`,effectsTitle:`「削除」をクリックすると何が起こるか`,effect1:`一致するアーカイブはリストから非表示になり、ファイル（3MF、サムネイル、タイムラプス、ソース3MF、F3D、写真）はディスクから削除されます。`,effect2:`アーカイブのレコードはデータベースに残るため、Quick Stats のフィラメント／時間／コスト／エネルギーの寄与は保持されます — 個別アーカイブ削除の既定動作と同じです。`,effect3:`下の「統計からも削除」を有効にすると、Quick Stats の寄与も破棄されます（個別アーカイブ削除のオプションと同等）。この操作は取り消せません。`,effect4:`アーカイブを再印刷するとエイジクロックがリセットされるため、まだ使用中のアーカイブは安全です。`,purgeStatsLabel:`統計からも削除`,purgeStatsHint:`一致するアーカイブを Quick Stats（フィラメント、時間、コスト、エネルギー）からも削除します。チェックしない場合、Quick Stats は寄与を保持し、ファイルのみがディスクから消えます。`,previewLoading:`一致するアーカイブの数を確認中…`,previewFailed:`削除のプレビューを表示できませんでした。`,previewSummary:`{{count}}件のアーカイブ · {{size}}が削除されます`,andMore:`…他に{{count}}件`,warning:`ファイルはディスクから削除され、元に戻せません。続行する前に、保持したいものをダウンロードまたはお気に入りに追加してください。`,confirmCta:`{{count}}件のアーカイブを削除`,purging:`削除中…`,toast:{success:`{{count}}件のアーカイブを削除しました。`,failed:`アーカイブを削除できませんでした。`}},archiveAutoPurge:{enableLabel:`古いアーカイブを自動削除`,enableDescription:`1日1回、しきい値内に印刷されていないアーカイブをリストから非表示にし、ファイルをディスクから削除します。再印刷するとタイマーがリセットされます。`,ageLabel:`印刷されていないアーカイブを自動削除（過去`,ageDescription:`最小7日、最大10年。最新の印刷完了に基づきます — 再印刷するとエイジがリセットされます。3MF、サムネイル、タイムラプス、ソース3MF、F3D、写真を削除します。`,days:`日`,purgeStatsLabel:`統計からも削除`,purgeStatsDescription:`有効にすると、毎日のスイーパーが削除した各アーカイブを Quick Stats（フィラメント、時間、コスト、エネルギー）からも除外します。既定はオフ — Quick Stats は寄与を保持し、ファイルのみがディスクから消えます。`,runNow:`アーカイブを今すぐ削除`,saveFailed:`自動削除設定を保存できませんでした。`},cameraTokens:{scope:{camera_stream:`カメラストリーム`,camwall:`カメラウォール`,overlay:`配信オーバーレイ`},title:`カメラAPIトークン`,navTitle:`カメラAPIトークン`,description:`Home Assistant、Frigate、キオスク画面など、安定した URL を必要とするツールにカメラ映像を埋め込むための長期トークンです。スコープは作成時に選択し、トークンはいつでも取り消せます。`,loading:`読み込み中…`,confirmRevoke:{title:`このトークンを取り消しますか？`,body:`「{{name}}」を使用しているデバイスは直ちにアクセスできなくなります。元に戻せません。`,cancel:`キャンセル`,confirm:`取り消し`},create:{scopeLabel:`スコープ`,hintCameraStream:`カメラストリームトークンで取得できるのは、カメラの映像とスナップショットだけです。Home Assistant や Frigate など、単一のカメラを埋め込む用途に使用してください。`,hintCamWall:`カメラウォールトークンは、ログインなしの画面で /camwall を開きます。各プリンターの名前と状態、そしてカメラ映像を見ることができます。ファイル名、アドレス、アクセスコードは見えません。`,hintOverlay:`配信オーバーレイトークンは、ログインなしの画面で /overlay/{printerId} を開きます — OBS やライブ配信向けです。1台のプリンターのカメラ映像に加え、画面に表示されるファイル名を含むライブの印刷状況を見ることができます。アドレスやアクセスコードは見えません。`,title:`新しいトークンを作成`,nameLabel:`トークン名`,namePlaceholder:`例：Home Assistant`,daysLabel:`有効期限までの日数`,submit:`作成`,hint:`最大有効期間は365日。トークン値は作成時に一度だけ表示されます — 今すぐコピーしてください。`},created:{camWallUrlTitle:`この画面用のカメラウォール URL`,camWallUrlHint:`この URL を画面で開いてください。URL を読める人は誰でもウォールを見られるため、鍵と同じように扱ってください。トークンを取り消すと、その画面は遮断されます。`,overlayUrlTitle:`OBS 用のオーバーレイ URL`,overlayUrlHint:`これを OBS の「ブラウザ」ソース（Browser Source）として追加してください。/overlay/1 の番号を、お使いのプリンターの番号（プリンターページの URL に表示）に変更します。URL を読める人は誰でも配信を見られるため、鍵と同じように扱い、遮断するにはトークンを取り消してください。`,title:`トークンを作成しました – 今すぐコピー`,warning:`このトークンが表示されるのは今回限りです。このダイアログを閉じると二度と表示できません。`,copy:`コピー`,dismiss:`保存しました`},list:{scope:`スコープ`,myTitle:`マイトークン`,allTitle:`全ユーザー（管理者ビュー）`,empty:`トークンはまだありません。`,name:`名前`,owner:`所有者`,prefix:`プレフィックス`,created:`作成`,expires:`有効期限`,lastUsed:`最終使用`,revoke:`取り消し`,expired:`期限切れ`},toast:{created:`トークンを作成しました`,createFailed:`トークンの作成に失敗`,revoked:`トークンを取り消しました`,revokeFailed:`トークンの取り消しに失敗`,loadFailed:`トークンの読み込みに失敗`,copied:`クリップボードにコピー`,copyFailed:`コピーに失敗 – 手動で選択してコピー`}},forecast:{title:`在庫予測`,noSpools:`アクティブなスプールが見つかりません。予測データを表示するには、在庫にスプールを追加してください。`,noUsageData:`使用データがありません — 在庫のタイムラインを予測できません。`,sku:`SKU`,material:`素材`,stock:`在庫`,dailyRate:`レート`,daysLeft:`残り日数`,emptyBy:`在庫切れ予定日`,reorderBy:`発注期限`,actions:`操作`,trend:`トレンド`,estimated:`推定`,noData:`データなし`,timeframe:`期間`,chartTitle:`在庫予測 — 上位5素材`,dashedLinesROP:`破線 = 発注点`,stockLevel:`在庫量`,reorderPoint:`発注点`,safetyMargin:`安全余裕`,trendLegend:`トレンド（履歴ベース、95%サービスレベル）`,estimatedLegend:`推定（重量差分）`,noDataLegend:`データなし`,ropLabel:`発注点`,ssLabel:`安全在庫`,safetyStockLegend:`安全在庫`,stockArrivalLegend:`入荷`,stockoutLegend:`品切れ`,alertCount_one:`{{count}}件の警告`,alertCount_other:`{{count}}件の警告`,order:`注文`,globalLeadTime:`グローバルリードタイム`,globalLeadTimeHint:`グローバルリードタイムの下限 — 全SKUの発注点計算に使用`,save:`保存`,cancel:`キャンセル`,settingsSaved:`設定を保存しました`,failedSaveSettings:`設定の保存に失敗しました`,globalLeadTimeSaved:`グローバルリードタイムを保存しました`,skuLeadTimeOverride:`SKUリードタイム上書き`,skuLeadTimeHint:`0 = グローバルリードタイムを使用。このSKUを上書きするには0より大きい値を設定。`,safetyMarginLabel:`安全余裕`,effectiveLeadTime:`実効リードタイム`,effectiveLeadTimeHint:`max(グローバル {{global}}日, SKU {{sku}}日)`,reorderPointHint:`d̄ × LT + safety margin — 在庫がこのレベルに達したら発注`,safetyMarginHint:`統計的安全在庫 (z=1.65 × σ × √LT) + ユーザー定義バッファ`,safetyMarginHintDays:`統計的安全在庫に加算されるバッファ。{{approx}}`,safetyMarginHintDaysApprox:` ≈ 現在のペースで{{g}}g。`,safetyMarginHintG:`統計的安全在庫に加算される固定重量バッファ。{{approx}}`,safetyMarginHintGApprox:` ≈ 現在のペースで{{days}}日。`,individualSpools:`個別スプール`,labelWeight:`ラベル`,spoolCount_one:`{{count}}個のスプール`,spoolCount_other:`{{count}}個のスプール`,stockBreakRisk:`在庫切れリスク`,stockBreakBefore:`補充前の在庫切れ`,stockBreakDetail:`残り{{days}}日、リードタイム{{lt}}日。`,reorderNow:`今すぐ発注`,reorderTriggerPassed:`発注トリガー日 {{date}} が経過しました。`,shoppingList:`購入リスト`,shoppingListItems_one:`（{{count}}件）`,shoppingListItems_other:`（{{count}}件）`,shoppingListEmpty:`購入リストは空です。行のカートアイコンをクリックしてアイテムを追加してください。`,addToCart:`購入リストに追加`,alertsSnoozed:`このSKUのアラートをミュート`,alertsEnabled:`このSKUのアラートを有効にする`,addedToCart:`買い物リストに追加しました`,failedAddItem:`アイテムの追加に失敗しました`,listView:`リスト`,logisticsView:`ロジスティクス`,qty:`数量`,weight:`重量`,leadTime:`リードタイム`,expectedRestock:`入荷予定日`,status:`ステータス`,note:`メモ`,pending:`保留中`,purchased:`発注済み`,received:`受領済み`,markPurchased:`発注済みとしてマーク`,markReceived:`受領済みとしてマーク — スプールを在庫に追加`,resetToPending:`保留中にリセット`,remove:`削除`,clearAll:`すべてクリア`,downloadCsv:`CSV`,addToCartTitle:`買い物リストに追加`,byQuantity:`数量で`,byDuration:`期間で`,numberOfSpools:`スプール数`,lastHowManyDays:`何日間持つべきですか？`,noUsageQty:`使用データなし — 数量を1に設定しました。`,noteOptional:`メモ（任意）`,notePlaceholder:`例：プロジェクトX用、緊急…`,addNSpools_one:`{{count}}個のスプールを追加`,addNSpools_other:`{{count}}個のスプールを追加`,onArrival:`入荷時`,stockBreakIn:`{{days}}日後に在庫切れ。`,stockRunsOutBefore:`リードタイム{{lt}}日が経過する前に在庫が枯渇します。`,atRate:`{{rate}}g/日のペースでは`,moreSpools_one:`あと{{count}}個のスプール`,moreSpools_other:`あと{{count}}個のスプール`,bridgeGap:`が不足を補うために必要です。`,noReadAccess:`在庫予測を閲覧する権限がありません。`,noWriteAccess:`予測設定を変更する権限がありません。`}}},it:{translation:{nav:{printers:`Stampanti`,archives:`Archivi`,queue:`Coda di stampa`,stats:`Statistiche`,profiles:`Profili`,maintenance:`Manutenzione`,projects:`Progetti`,inventory:`Filamento`,finance:`Finanze`,files:`File`,makerworld:`MakerWorld`,notifications:`Notifiche`,settings:`Impostazioni`,system:`Sistema`,collapseSidebar:`Comprimi barra laterale`,expandSidebar:`Espandi barra laterale`,update:`Aggiorna`,updateAvailable:`Aggiornamento disponibile: v{{version}}`,updateAvailableBanner:`Versione {{version}} disponibile!`,viewUpdate:`Vedi aggiornamento`,viewOnGithub:`Vedi su GitHub`,keyboardShortcuts:`Scorciatoie da tastiera (?)`,switchToLight:`Passa a tema chiaro`,switchToDark:`Passa a tema scuro`,switchToSystem:`Passa a tema di sistema`,smartSwitches:`Interruttori Smart`,logout:`Esci`,installApp:`Installa app`,installAppSuccess:`Bambuddy è stato installato`},common:{plusNMore:`+{{count}} altri`,save:`Salva`,saving:`Salvataggio...`,cancel:`Annulla`,delete:`Elimina`,edit:`Modifica`,add:`Aggiungi`,close:`Chiudi`,confirm:`Conferma`,loading:`Caricamento...`,error:`Errore`,errorLoading:`Errore di caricamento`,retry:`Riprova`,success:`Successo`,warning:`Avviso`,enabled:`Abilitato`,disabled:`Disabilitato`,yes:`Si`,no:`No`,on:`On`,off:`Spento`,all:`Tutti`,none:`Nessuno`,search:`Cerca`,filter:`Filtro`,sort:`Ordina`,refresh:`Aggiorna`,download:`Scarica`,upload:`Carica`,uploading:`Caricamento...`,uploadFailed:`Caricamento fallito`,actions:`Azioni`,status:`Stato`,name:`Nome`,description:`Descrizione`,date:`Data`,time:`Ora`,hours:`ore`,minutes:`minuti`,seconds:`secondi`,days:`giorni`,enable:`Abilita`,disable:`Disabilita`,permissions:`Permessi`,noPrinters:`Nessuna stampante configurata`,noData:`Nessun dato disponibile`,linkNotFound:`Link non trovato`,required:`Obbligatorio`,optional:`Opzionale`,dismiss:`Chiudi`,apply:`Applica`,reset:`Reimposta`,export:`Esporta`,import:`Importa`,clear:`Pulisci`,selectAll:`Seleziona tutto`,deselectAll:`Deseleziona tutto`,noChange:`— Nessun cambio —`,unchanged:`Invariato`,unassigned:`Non assegnato`,unknown:`Sconosciuto`,unknownError:`Errore sconosciuto`,today:`Oggi`,tomorrow:`Domani`,asap:`ASAP`,overdue:`Scaduto`,now:`Ora`,collapse:`Comprimi`,expand:`Espandi`,previous:`Precedente`,next:`Successivo`,viewArchive:`Vedi archivio`,viewInFileManager:`Vedi nel Gestore file`,addedBy:`Aggiunto da {{username}}`,prints:`stampe`,more:`+{{count}} altre`,ascending:`Crescente`,descending:`Decrescente`,back:`Indietro`,copy:`Copia`,copied:`Copiato!`,printer:`Stampante`,remove:`Rimuovi`,type:`Tipo`,print:`Stampa`,rename:`Rinomina`,move:`Sposta`,create:`Crea`,duplicate:`Duplica`,left:`Sinistra`,right:`Destra`,user:`Utente`,run:`Esegui`,running:`In esecuzione...`},finance:{allTypes:`Tutti i tipi`,allCostCenters:`Tutti i centri di costo`,title:`Finanza`,subtitle:`Portafoglio, transazioni personali e centri di costo`,noAccess:`Non hai il permesso di visualizzare i dati finanziari.`,personalView:`Vista personale`,adminView:`Vista amministratore`,createCostCenter:`Crea centro di costo`,adjustWallet:`Regola portafoglio`,addManualPrint:`Aggiungi stampa manuale`,manageMembers:`Gestisci membri del centro di costo`,currentBalance:`Saldo personale`,transactions:`Transazioni`,personalTransactions:`Transazioni personali`,costCenters:`Centri di costo`,availableForPrinting:`Disponibile per l'assegnazione stampa`,costCenterName:`Nome`,budgetType:`Tipo di budget`,monthlyBudget:`Budget mensile`,totalBudget:`Budget totale`,noBudget:`Nessun budget`,create:`Crea`,selectUser:`Seleziona utente`,transactionType:`Tipo`,amount:`Importo`,noCostCenter:`Nessun centro di costo`,descriptionOptional:`Descrizione (facoltativa)`,applyAdjustment:`Applica rettifica`,memberCanPrint:`Il membro può stampare`,addMember:`Aggiungi membro`,canPrint:`Può stampare`,noMembers:`Nessun membro assegnato.`,editCostCenter:`Modifica centro di costo`,myCostCenters:`I miei centri di costo`,costCentersHint:`Controlla i limiti di budget e mantieni i costi sotto controllo`,noCostCenters:`Nessun centro di costo trovato.`,owner:`Proprietario`,balance:`Saldo conto`,unlimited:`Illimitato`,budgetPolicyHint:`I saldi dei conti registrano i costi. La stampa è limitata solo dal budget del centro di costo selezionato; senza budget è illimitata.`,budget:`Budget`,shared:`Condiviso`,cannotEditPrivateCostCenter:`I centri di costo privati non possono essere modificati qui`,recentTransactions:`Transazioni recenti`,transactionsHint:`Filtra per tipo e centro di costo`,first:`Prima`,prev:`Precedente`,next:`Successiva`,last:`Ultima`,pageNumberOf:`Pagina {{page}} di {{total}}`,noTransactions:`Nessuna transazione disponibile.`,noTransactionsForFilter:`Nessuna transazione corrisponde ai filtri selezionati.`,costCenter:`Centro di costo`,balanceAfter:`Saldo successivo`,userWithId:`Utente #{{id}}`,partial:`Parziale`,editTransaction:`Modifica transazione`,selectCostCenter:`Seleziona centro di costo...`,costCenterRequired:`Si prega di selezionare un centro di costo`,amountExample:`es. 4,00`,manualAdjustmentExample:`es. Rettifica manuale`,userRequired:`Si prega di selezionare un utente`,amountInvalid:`L'importo deve essere un numero valido`,createdCostCenter:`Centro di costo creato`,createCostCenterFailed:`Impossibile creare il centro di costo`,transactionDeleted:`Transazione eliminata`,deleteTransactionFailed:`Impossibile eliminare la transazione`,transactionEdited:`Transazione aggiornata e ledger ricalcolato`,editTransactionFailed:`Impossibile modificare la transazione`,manualPrintCreated:`Addebito stampa manuale aggiunto e ledger ricalcolato`,manualPrintFailed:`Impossibile creare la stampa manuale`,memberSaved:`Membro salvato`,memberSaveFailed:`Impossibile salvare il membro`,memberRemoved:`Membro rimosso`,memberRemoveFailed:`Impossibile rimuovere il membro`,costCenterNameRequired:`Il nome del centro di costo è obbligatorio`,costCenterUpdated:`Centro di costo aggiornato`,costCenterUpdateFailed:`Impossibile aggiornare il centro di costo`,confirmDeleteCostCenter:`Eliminare il centro di costo "{{name}}"?`,costCenterDeleted:`Centro di costo eliminato`,costCenterDeleteFailed:`Impossibile eliminare il centro di costo`,deleteTransactionConfirm:`Eliminare questa transazione? I saldi verranno ricalcolati automaticamente.`,deposit:`Deposito`,withdraw:`Prelievo`,printCharge:`Addebito stampa`,deleteTransaction:`Elimina transazione`},printers:{addPreflight:{checking:`Verifica della connessione...`,warning:`Alcuni controlli di connessione non sono riusciti. Questa stampante potrebbe risultare offline. Controlla le verifiche qui sotto, risolvi ciò che puoi oppure salva comunque.`,back:`Indietro`,saveAnyway:`Salva comunque`},title:`Stampanti`,addPrinter:`Aggiungi Stampante`,editPrinter:`Modifica Stampante`,deletePrinter:`Elimina Stampante`,printerName:`Nome Stampante`,serialNumber:`Numero Seriale`,ipAddress:`Indirizzo IP`,accessCode:`Codice di Accesso`,model:`Modello`,nozzleCount:`Numero Ugelli`,autoArchive:`Auto Archiviazione`,status:{available:`Disponibile`,idle:`Inattiva`,printing:`In stampa`,paused:`In pausa`,offline:`Offline`,problem:`Problema`,error:`Errore`,finished:`Finita`,unknown:`Sconosciuto`},temperatures:{nozzle:`Ugello`,bed:`Piatto`,chamber:`Camera`},heaterHistory:{title:`Storico riscaldatori`,openLabel:`Visualizza storico riscaldatori`,nozzle:`Ugello`,nozzle2:`Ugello 2`,bed:`Piatto`,chamber:`Camera`,error:`Caricamento storico fallito`,empty:`Nessun dato registrato`},progress:`{{percent}}% completato`,timeRemaining:`{{time}} rimanente`,deleteConfirm:`Sei sicuro di eliminare "{{name}}"?`,maintenanceOk:`Manutenzione OK`,maintenanceWarning:`{{count}} avviso`,maintenanceWarning_plural:`{{count}} avvisi`,maintenanceDue:`{{count}} in scadenza`,maintenanceDue_plural:`{{count}} in scadenza`,sort:{name:`Nome`,status:`Stato`,model:`Modello`,location:`Posizione`,eta:`Tempo rimanente`,ascending:`Ordina crescente`,descending:`Ordina decrescente`},cardSize:{small:`Schede piccole`,medium:`Schede medie`,large:`Schede grandi`,extraLarge:`Schede extra grandi`},pageView:{openCamWallPage:`Apri il muro telecamere come pagina`,cards:`Schede`,camWall:`Muro telecamere`},camWall:{page:{tokenRejected:`Questo link al muro telecamere non è più valido. Il token potrebbe essere scaduto o essere stato revocato.`,loadFailed:`Impossibile caricare le stampanti.`},noPrinters:`Nessuna stampante da mostrare`,noSignal:`Nessun segnale`,live:`Live`,snap:`Foto`,off:`Spento`,summary:`{{live}} live, {{snap}} foto, {{total}} totali`,layer:`Strato {{cur}}/{{total}}`,timeLeft:`{{time}} rimanenti`,statusMode:{off:`Off`,compact:`Compatto`,full:`Completo`},settings:{title:`Impostazioni muro telecamere`,maxLive:`Max stream live`,maxLiveHint:`Quante tessere trasmettono in live contemporaneamente. Le altre si aggiornano come foto.`,snapshotInterval:`Intervallo foto (secondi)`,snapshotIntervalHint:`Con quale frequenza le tessere non live scaricano una nuova foto.`,statusOverlay:`Overlay di stato`,statusOverlayHint:`Compatto: solo badge di stato. Completo: + avanzamento, strato, tempo residuo.`}},hideOffline:`Nascondi offline`,nextAvailable:`Prossima disponibile`,powerOn:`Accendi`,offlinePrintersWithPlugs:`Stampanti offline con smart plug`,noPrintersConfigured:`Nessuna stampante configurata`,search:`Cerca stampanti...`,noSearchResults:`Nessuna stampante corrisponde alla tua ricerca o ai tuoi filtri`,filter:{allStatuses:`Tutti gli stati`,allLocations:`Tutti i luoghi`},toolbar:{filters:`Filtri`,view:`Vista`,actions:`Azioni`},readyToPrint:`Pronta a stampare`,external:`Esterna`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Elimina archivi stampa`,noLabel:`Nessuna etichetta`,printPreview:`Anteprima stampa`,width:`Larghezza`,height:`Altezza`,noObjectsFound:`Nessun oggetto trovato`,objectsLoadedOnPrintStart:`Gli oggetti sono caricati quando inizia una stampa`,willBeSkipped:`Verra saltato`,name:`Nome`,serialCannotBeChanged:`Il numero seriale non può essere cambiato`,locationHelp:`Usato per raggruppare stampanti e filtrare i lavori in coda`,wifiSignal:{veryWeak:`Molto debole`,weak:`Debole`,fair:`Discreto`,good:`Buono`,excellent:`Eccellente`},maintenanceUpToDate:`Tutta la manutenzione aggiornata - Clicca per vedere`,maintenance:{title:`In manutenzione`,subtitle:`Questa stampante è in pausa — non connessa, non idonea per la coda, nessuna notifica inviata.`,pillLabel:`Manutenzione`,exitButton:`Esci dalla manutenzione`,menuEnter:`Entra in modalità manutenzione`,menuExit:`Esci dalla modalità manutenzione`,toastEntered:`{{name}} è ora in modalità manutenzione`,toastExited:`{{name}} è di nuovo online`,confirmMidPrintTitle:`Entrare in modalità manutenzione durante la stampa?`,confirmMidPrintMessage:`{{name}} sta attualmente stampando. Entrare in modalità manutenzione disconnetterà MQTT e fermerà il tracciamento del progresso e le notifiche di completamento per questo lavoro. Continuare?`,editFieldLabel:`Modalità manutenzione`,editFieldHelp:`Quando attivata, questa stampante è in pausa da MQTT, dispatch della coda e notifiche — utile per riparazioni, installazioni Bambuddy parallele o sospensione temporanea.`},chamberLightOn:`Accendi luce camera`,chamberLightOff:`Spegni luce camera`,files:`File`,browseFiles:`Sfoglia file stampante`,autoOffAfterPrint:`Spegnimento automatico dopo stampa`,autoOffExecuted:`Spegnimento automatico eseguito - accendi la stampante per reimpostare`,hmsErrors:`Errori HMS`,viewHmsErrors:`Vedi {{count}} errore(i) HMS`,resume:`Riprendi`,pause:`Pausa`,stop:`Ferma`,camera:`Telecamera`,skipObject:`Salta Oggetto`,reconnect:`Riconnetti`,forceRefresh:`Forza aggiornamento`,forceRefreshSuccess:`Aggiornamento richiesto`,mqttDebug:`Debug MQTT`,printerInformation:`Informazioni stampante`,copyToClipboard:`Copia`,copied:`Copiato!`,state:`Stato`,wifiSignalLabel:`Segnale WiFi`,developerMode:`Modalità sviluppatore`,enabled:`Attivato`,disabled:`Disattivato`,addedOn:`Aggiunta il`,sdCard:`Scheda SD`,inserted:`Inserita`,notInserted:`Non inserita`,totalPrintHours:`Ore di stampa`,activeNozzle:`Attivo: ugello {{nozzle}}`,amsSwitchInletTooltip:`Filament Track Switch IN-{{inlet}} ({{side}}) — alimenta entrambi gli ugelli`,nozzleRack:`Rack Ugelli`,nozzleDocked:`Agganciato`,nozzleMounted:`Montato`,nozzleActive:`Attivo`,nozzleIdle:`Inattivo`,nozzleDiameter:`Diametro`,nozzleType:`Tipo`,nozzleStatus:`Stato`,nozzleFilament:`Filamento`,nozzleWear:`Usura`,nozzleMaxTemp:`Temp Max`,nozzleSerial:`Seriale`,nozzleHardenedSteel:`Acciaio Temprato`,nozzleStainlessSteel:`Acciaio Inox`,nozzleTungstenCarbide:`Carburo di Tungsteno`,nozzleFlow:`Flusso`,nozzleHighFlow:`Alto Flusso`,nozzleStandardFlow:`Standard`,firmwareUpdate:`Aggiornamento Firmware`,firmwareInstructions:`Sul touchscreen della stampante, vai a`,firmwareNav:`Vai a`,settings:`Impostazioni`,firmware:`Firmware`,discoverPrinters:`Trova Stampanti`,searching:`Ricerca...`,manualEntry:`Inserimento manuale`,addFromCloud:`Aggiungi da Cloud`,toast:{printerDeleted:`Stampante eliminata`,missingSpoolAssignment:`Stampa avviata su {{printer}}. Mancano assegnazioni bobina per: {{slots}}`,killSwitchTriggered:`L’interruttore di sicurezza della fatturazione ha arrestato una stampa non autorizzata su {{printer}}: {{filename}}`,billingChargeFailed:`La fatturazione di {{filename}} su {{printer}} non è riuscita. La prenotazione del budget è stata mantenuta; controlla i log del server.`,assignmentVerified:`Filamento caricato nello slot {{slot}} ({{printer}})`,assignmentVerifiedNoKprofile:`Slot {{slot}} su {{printer}} caricato, ma il profilo di calibrazione del flusso (profilo K) non è stato applicato`,assignmentNotConfirmed:`Impossibile confermare l'assegnazione dello slot {{slot}} su {{printer}} — controlla lo slot AMS`,printerAdded:`Stampante aggiunta`,printerUpdated:`Stampante aggiornata`,failedToDelete:`Impossibile eliminare stampante`,failedToAdd:`Impossibile aggiungere stampante`,connectionFailedNotAdded:`Impossibile connettersi alla stampante. Verifica IP, numero di serie e codice di accesso e conferma che la modalità solo LAN sia attiva. La stampante non è stata aggiunta.`,failedToUpdate:`Impossibile aggiornare stampante`,commandSent:`Comando inviato`,failedToSendCommand:`Impossibile inviare comando`,turnedOn:`{{name}} accesa`,failedToPowerOn:`Impossibile accendere {{name}}`,scriptTriggered:`Script avviato`,printStopped:`Stampa fermata`,printPaused:`Stampa in pausa`,printResumed:`Stampa ripresa`,referenceDeleted:`Riferimento eliminato`,detectionAreaSaved:`Area rilevamento salvata`,failedToRunScript:`Impossibile eseguire script`,failedToStopPrint:`Impossibile fermare stampa`,failedToPausePrint:`Impossibile mettere in pausa stampa`,failedToResumePrint:`Impossibile riprendere stampa`,failedToControlChamberLight:`Impossibile controllare luce camera`,failedToSetSpeed:`Impossibile impostare la velocità di stampa`,failedToUpdateSetting:`Impossibile aggiornare impostazione`,failedToSkipObjects:`Impossibile saltare oggetti`,failedToRereadRfid:`Impossibile rileggere RFID`,failedToCheckPlate:`Impossibile controllare piatto`,failedToUpdateLabel:`Impossibile aggiornare etichetta`,failedToDeleteReference:`Impossibile eliminare riferimento`,failedToSaveDetectionArea:`Impossibile salvare area rilevamento`,plateCheckEnabled:`Controllo piatto abilitato`,plateCheckDisabled:`Controllo piatto disabilitato`,calibrationSaved:`Calibrazione salvata!`,calibrationFailed:`Calibrazione non riuscita`,rfidRereadInitiated:`Rilettura RFID avviata`,loadInitiated:`Caricamento filamento…`,unloadInitiated:`Scaricamento filamento…`,failedToLoad:`Caricamento filamento fallito`,failedToUnload:`Scaricamento filamento fallito`},connection:{connected:`Connesso`,offline:`Offline`},plateStatus:{markCleared:`Segna il piatto come liberato`,cleared:`Piatto libero`,notCleared:`Piatto non libero`,inUse:`Piatto in uso`},queue:{inQueue:`{{count}} stampa in coda`,inQueue_plural:`{{count}} stampe in coda`},controls:`Controlli`,rfid:{reread:`Rileggi RFID`},ams:{load:`Carica`,unload:`Scarica`,feedTitle:`Caricare {{slot}} in quale ugello?`,feedPrompt:`Il Filament Track Switch può instradare questo slot verso entrambi gli hotend. Scegli quale alimentare.`,feedLeft:`Ugello sinistro`,feedRight:`Ugello destro`,feedAlreadyLoaded:`Già caricato`,switchNotReady:`Il Filament Track Switch non è ancora configurato. Assegna ogni AMS a un ingresso sulla stampante, poi riprova.`},bedJog:{limitWarning:`I limiti di corsa non vengono applicati durante i movimenti manuali: un bug del firmware Bambu ignora i finecorsa software per i comandi remoti. Muovi con cautela per evitare collisioni.`,title:`Controlli jog`,bed:`Piano`,step:`Passo (mm)`,up:`Sposta piano su`,down:`Sposta piano giù`,toolheadUp:`Sposta testina su`,toolheadDown:`Sposta testina giù`,disabledWhilePrinting:`Disabilitato durante la stampa`,notHomedTitle:`Stampante non azzerata`,notHomedMessage:`La stampante non è stata azzerata dall'ultima stampa. Esegui prima l'azzeramento automatico per un posizionamento sicuro (parcheggia la testa di stampa, poi azzera X, Y e Z), oppure muovi comunque — i finecorsa software verranno ignorati.`,homeZ:`Azzeramento automatico`,moveAnyway:`Muovi comunque`,homingStarted:`Azzeramento automatico in corso…`},permission:{noAdd:`Non hai il permesso di aggiungere stampanti`,noEdit:`Non hai il permesso di modificare stampanti`,noDelete:`Non hai il permesso di eliminare stampanti`,noControl:`Non hai il permesso di controllare stampanti`,noFiles:`Non hai il permesso di accedere ai file stampante`,noAmsRfid:`Non hai il permesso di rileggere AMS RFID`,noSmartPlugControl:`Non hai il permesso di controllare smart plug`,noCamera:`Non hai il permesso di visualizzare le telecamere`},modal:{addTitle:`Aggiungi Stampante`,editTitle:`Modifica Stampante`,myPrinter:`La mia Stampante`,selectModel:`Seleziona modello...`,locationGroup:`Posizione / Gruppo (opzionale)`,locationPlaceholder:`es. Officina, Ufficio, Cantina`,autoArchiveLabel:`Archivia automaticamente stampe completate`,fromPrinterSettings:`Dalle impostazioni della stampante`,modelOptional:`Modello (opzionale)`,saveChanges:`Salva modifiche`},skipObjects:{tooltip:`Salta oggetti`,onlyWhilePrinting:`Salta oggetti (solo durante la stampa)`,requiresMultiple:`Salta oggetti (richiede 2+ oggetti)`,title:`Salta Oggetti`,matchIdsInfo:`Abbina gli ID con il display della stampante`,printerShowsIds:`Lo schermo mostra gli ID oggetto sul piatto`,skipSelected:`Salta selezionati`,skipping:`Saltando...`,noObjectsSelected:`Nessun oggetto selezionato`,selectObjectsToSkip:`Seleziona gli oggetti da saltare nella stampa corrente`,skipped:`saltato`,objectsSkipped:`Oggetti saltati`,activeCount:`{{count}} attivi`,waitForLayer:`Attendi il layer 2+ per saltare oggetti (attualmente layer {{layer}})`,skip:`Salta`,confirmTitle:`Saltare oggetto?`,confirmMessage:`Sei sicuro di voler saltare "{{name}}"? Questa azione non può essere annullata.`,confirmAllMessage:`Sono selezionati tutti gli oggetti rimanenti. Questo interromperà il processo di stampa. Continuare?`,confirmMultipleMessage:`Saltare {{count}} oggetti selezionati? Questa azione non può essere annullata.`},confirm:{deleteTitle:`Elimina Stampante`,deleteMessage:`Sei sicuro di eliminare "{{name}}"? Questo rimuoverà tutte le impostazioni di connessione.`,deleteArchivesNote:`Tutta la cronologia di stampa sarà eliminata definitivamente.`,keepArchivesNote:`La cronologia sarà mantenuta ma non più associata a questa stampante.`,stopTitle:`Ferma Stampa`,stopMessage:`Sei sicuro di fermare la stampa corrente su "{{name}}"? Questo annullerà il lavoro di stampa.`,stopButton:`Ferma Stampa`,pauseTitle:`Pausa Stampa`,pauseMessage:`Sei sicuro di mettere in pausa la stampa corrente su "{{name}}"?`,pauseButton:`Pausa Stampa`,resumeTitle:`Riprendi Stampa`,resumeMessage:`Sei sicuro di riprendere la stampa su "{{name}}"?`,resumeButton:`Riprendi Stampa`,powerOnTitle:`Accendi Stampante`,powerOnMessage:`Sei sicuro di accendere "{{name}}"?`,powerOnButton:`Accendi`,powerOffTitle:`Spegni Stampante`,powerOffMessage:`Sei sicuro di spegnere "{{name}}"?`,powerOffWarning:`AVVISO: "{{name}}" sta stampando! Sei sicuro di spegnere? Questo interromperà la stampa e potrebbe danneggiare la stampante.`,powerOffButton:`Spegni`,haToggleTitle:`Commuta "{{name}}"`,haToggleMessage:`Commutare l'entità Home Assistant {{entity}}? Questo potrebbe spegnere l'alimentazione se attualmente è accesa.`,haToggleWarning:`AVVISO: "{{name}}" sta stampando! La commutazione di {{entity}} potrebbe togliere l'alimentazione e interrompere la stampa. Continuare?`,haToggleButton:`Commuta`},bulk:{select:`Seleziona`,selectAll:`Seleziona tutto`,selectByLocation:`Seleziona per posizione`,selected:`{{count}} selezionato/i`,actions:{stop:`Ferma`,pause:`Pausa`,resume:`Riprendi`,clearPlate:`Svuota piano`,clearHMS:`Cancella notifiche`},confirm:{stopTitle:`Ferma {{count}} stampe`,stopMessage:`Questo annullerà le stampe attive su {{count}} stampante/i. Questa azione non può essere annullata.`,stopButton:`Ferma tutte`,pauseTitle:`Pausa {{count}} stampe`,pauseMessage:`Questo metterà in pausa le stampe attive su {{count}} stampante/i.`,pauseButton:`Pausa tutte`,clearPlateTitle:`Svuota {{count}} piani di stampa`,clearPlateMessage:`Questo svuoterà il piano di stampa su {{count}} stampante/i e potrebbe avviare i lavori in coda.`,clearPlateButton:`Svuota tutti`},success:`{{action}} completato su {{count}} stampante/i`,partial:`{{succeeded}} riuscito/i, {{failed}} fallito/i`,noneApplicable:`Nessuna stampante selezionata è nello stato corretto per questa azione`,selectByState:`Seleziona per stato`},discovery:{title:`Trova Stampanti`,searching:`Ricerca...`,scanning:`Scansione...`,scanProgress:`Scansione... {{scanned}}/{{total}}`,foundPrinters:`Trovate {{count}} stampante(i)`,noPrintersFound:`Nessuna stampante trovata`,noPrintersFoundSubnet:`Nessuna stampante trovata nella sottorete specificata.`,noPrintersFoundNetwork:`Nessuna stampante trovata sulla rete.`,allConfigured:`Tutte le stampanti trovate sono già configurate.`,alreadyAdded:`Già aggiunta`,select:`Seleziona`,manualEntry:`Inserimento manuale`,addFromCloud:`Aggiungi da Cloud`,subnetToScan:`Sottorete da scansionare`,dockerNote:`Docker rilevato. Inserisci la sottorete della stampante in notazione CIDR. Richiede network_mode: host in docker-compose.yml.`,scanSubnet:`Scansiona sottorete per stampanti`,discoverNetwork:`Trova stampanti in rete`,scanningSubnet:`Scansione sottorete per stampanti Bambu...`,scanningNetwork:`Scansione rete...`,serialRequired:`Seriale richiesto`,unknown:`Sconosciuto`,failedToStart:`Avvio ricerca non riuscito`,customSubnetOption:`Sottorete personalizzata...`,customSubnetLabel:`Sottorete personalizzata (CIDR)`,customSubnetNote:`Usa una sottorete personalizzata se la tua stampante è su una rete diversa da questo server. Le porte FTP (990) e MQTT (8883) devono essere raggiungibili attraverso il confine di routing.`},drying:{start:`Avvia essiccazione`,stop:`Ferma essiccazione`,temperature:`Temperatura`,duration:`Durata`,hours:`ore`,timeRemaining:`{{time}} rimanente`,active:`Essiccazione`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`Essiccazione non supportata`,powerRequired:`Collegare l'alimentatore AMS per abilitare l'asciugatura`,cannotDryNow:`L'AMS non può avviare l'asciugatura al momento`,startingDrying:`Avvio essiccazione...`,toastCommandSent:`Comando di essiccazione inviato`,toastStopped:`Essiccazione interrotta`,toastNotStarted:`La stampante ha accettato il comando, ma l'AMS non ha avviato l'essiccazione. Verifica che l'alimentatore dell'AMS sia collegato e che la stampante sia inattiva.`,screenOnly:`Su questa stampante l'essiccazione dell'AMS può essere comandata solo dallo schermo della stampante (limitazione di Bambu)`,stoppingDrying:`Arresto essiccazione...`,rotateTray:`Ruota la bobina durante l'essiccazione`,rotateUnavailableReason:`Non disponibile — uno slot di questo AMS è caricato verso la testa di stampa. La bobina è bloccata dal tubo di alimentazione e non può ruotare. Ritrai prima il filamento.`,startMode:`Ora di avvio`,modeNow:`Ora`,modeDelay:`Dopo un ritardo`,modeAtTime:`A un orario`,schedule:`Pianifica`,scheduledFor:`Asciugatura pianificata per {{time}}`,scheduledAsap:`Asciugatura pianificata (in attesa della stampante)`,cancelScheduled:`Annulla asciugatura pianificata`,scheduleFailed:`Pianificazione dell'asciugatura non riuscita`,retractFilament:`Ritrarre il filamento dall'uscita dell'AMS per avviare l'asciugatura`,waitingAmsNotFound:`In attesa del rilevamento dell'AMS`,waitingOffline:`In attesa che la stampante torni online`,waitingPrinterBusy:`In attesa che la stampante sia libera`,waitingAlreadyDrying:`In attesa che termini il ciclo di asciugatura in corso`,waitingInterrupted:`Interrotta, riprenderà quando la stampante sarà libera`,scheduleFailedReason:`Asciugatura pianificata non riuscita: {{reason}}`,scheduleFailedUnknown:`Errore sconosciuto`,dismissFailed:`Ignora`},amsBackup:{titleOn:`AMS Filament Backup è ATTIVO. Clicca per disabilitare.`,titleOff:`AMS Filament Backup è DISATTIVATO. Clicca per abilitare.`,titleUnknown:`Stato di AMS Filament Backup non disponibile su questa stampante.`,toastEnabled:`AMS Filament Backup abilitato`,toastDisabled:`AMS Filament Backup disabilitato`,modalTitle:`AMS Filament Backup`,modalHelp:`Quando lo slot attivo si esaurisce, la stampante passa agli slot con lo stesso preset e colore in quest'ordine.`,modalNoSlots:`Nessun filamento caricato.`,modalNoPairs:`Nessuna coppia di backup — nessuno slot condivide preset e colore.`,extruderRightShort:`D`,extruderLeftShort:`S`,stateOn:`Abilitato`,stateOff:`Disabilitato`,stateUnknown:`Non supportato su questa stampante`},activeJobSlot:{title:`Questo slot è il filamento {{n}} nella stampa attiva`,ariaLabel:`Slot stampa attiva {{n}}`},expectedSlot:{title:`La stampante è in attesa di filamento in questo slot`,ariaLabel:`Slot filamento previsto {{n}}`,label:`{{ams}} · Slot {{slot}}`,external:`Bobina esterna`},filaments:`Filamenti`,externalSpool:{hide:`Nascondi bobina esterna`,show:`Mostra bobina esterna`},openCameraOverlay:`Apri overlay camera`,openCameraWindow:`Apri camera in nuova finestra`,firmwareUpdateAvailable:`Aggiornamento firmware disponibile: {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — Aggiornato`,firmwareUpdateButton:`Aggiorna`,plateDetection:{noPermission:`Non hai il permesso di aggiornare le stampanti`,enabledClick:`Controllo piatto abilitato - Clicca per disabilitare`,disabledClick:`Controllo piatto disabilitato - Clicca per abilitare`,manageCalibration:`Gestisci calibrazione rilevamento piatto`,calibrationRequired:`Calibrazione richiesta`,calibrationInstructions:`Assicurati che il piatto sia <strong>completamente vuoto</strong>, poi clicca Calibra.`,calibrationDescription:`La calibrazione salva un'immagine di riferimento del piatto vuoto. I controlli futuri confronteranno con questo riferimento per rilevare oggetti.`,calibrationTip:`<strong>Suggerimento:</strong> Puoi salvare fino a 5 calibrazioni per piatti diversi. Il sistema usa automaticamente la migliore corrispondenza durante il controllo.`,plateEmpty:`Il piatto sembra vuoto`,objectsDetected:`Oggetti rilevati sul piatto`,confidence:`Confidenza`,difference:`Differenza`,analysisPreview:`Anteprima analisi:`,analysisLegend:`Riquadro verde = area rilevamento, overlay rosso = differenze dalla calibrazione`,savedReferences:`Riferimenti salvati ({{count}}/{{max}})`,deleteReference:`Elimina riferimento`,labelPlaceholder:`Etichetta...`,clickToEdit:`{{label}} - Clicca per modificare`,clickToAddLabel:`Clicca per aggiungere etichetta`},speed:{title:`Velocità di stampa`,silent:`Silenzioso (50%)`,standard:`Standard (100%)`,sport:`Sport (124%)`,ludicrous:`Ludicrous (166%)`},airduct:{title:`Modalità condotto d'aria`,cooling:`Raffreddamento`,heating:`Riscaldamento`},noSdCard:`Nessuna SD`,door:{open:`Aperta`,closed:`Chiusa`},fans:{partCooling:`Ventola raffreddamento parte`,auxiliary:`Ventola ausiliaria`,leftAuxiliary:`Ventola ausiliaria sinistra`,exhaust:`Estrazione`,chamber:`Ventola camera`},clickToViewHmsErrors:`Clicca per vedere errori HMS`,aiDetection:{safe:`Sicuro`,warning:`Avviso`,failure:`Guasto`,idle:`Inattiva`,error:`Non controlla`,unknown:`Avvio`,tooltipError:`Il rilevamento guasti con IA non sta controllando questa stampa: {{reason}} - clicca per i dettagli`,tooltipUnknown:`Rilevamento guasti con IA: in attesa del primo risultato - clicca per i dettagli`,errorHint:`Questa stampa non viene controllata. Il rilevamento riprenderà automaticamente una volta risolto il problema indicato sotto.`,tooltip:`Rilevamento guasti con IA: {{status}} (punteggio {{score}}) - clicca per i dettagli`,tooltipIdle:`Rilevamento guasti con IA attivo - il monitoraggio inizia con la prossima stampa - clicca per i dettagli`,modalTitle:`Rilevamento guasti con IA - {{name}}`,currentStatus:`Stato`,score:`Punteggio`,framesAnalyzed:`Fotogrammi analizzati`,idleHint:`Al momento nessuna stampa è monitorata. Il monitoraggio inizia automaticamente con la prossima stampa.`,lastError:`Ultimo errore`,openSettings:`Apri impostazioni`},estimatedCompletion:`Tempo completamento stimato`,plateNumber:`Piastra {{number}}`,slotOptions:`Opzioni slot`,amsPopup:{friendlyName:`Nome AMS`,friendlyNamePlaceholder:`es. Nome AMS amichevole`,serialNumber:`Numero di serie`,firmwareVersion:`Firmware`,save:`Salva`,clear:`Cancella`,noEditPermission:`Non hai il permesso di rinominare le unità AMS`},firmwareModal:{title:`Aggiornamento Firmware`,titleUpToDate:`Info Firmware`,currentVersion:`Corrente:`,latestVersion:`Ultima:`,releaseNotes:`Note di rilascio`,checkingPrereqs:`Controllo prerequisiti...`,sdCardReady:`SD pronta. Clicca sotto per caricare firmware.`,uploadedSuccess:`Firmware caricato su SD!`,applyInstructions:`Per applicare l'aggiornamento sulla stampante:`,step1:`Sul touchscreen della stampante, vai a <strong>Impostazioni</strong>`,step2:`Vai a <strong>Firmware</strong>`,step3:`Seleziona <strong>Aggiorna da SD</strong>`,step4:`L'aggiornamento richiede 10-20 minuti`,done:`Fatto`,starting:`Avvio...`,uploadFirmware:`Carica Firmware`,uploadFailed:`Avvio caricamento fallito: {{error}}`,uploadedToast:`Firmware caricato! Avvia aggiornamento dal display.`,availableVersions:`Versioni disponibili`,usable:`Utilizzabile`,unavailable:`Non disponibile`,installed:`Installato`,newerBadge:`più recente`,olderBadge:`più vecchio`,currentBadge:`attuale`},accessCodePlaceholder:`Lascia vuoto per mantenere quello attuale`,roi:{title:`Area di rilevamento (ROI)`,xStart:`X Inizio`,yStart:`Y Inizio`,width:`Larghezza`,height:`Altezza`,instruction:`Regola l'area di rilevamento per focalizzare il piatto. Il riquadro verde mostra l'area corrente.`},developerModeWarning:`La modalità sviluppatore LAN non è attivata su: {{names}}. Alcune funzionalità potrebbero non funzionare.`,howToEnable:`Come attivare`,incompatibleFile:`Questo file è stato preparato per {{slicedFor}}, ma questa stampante è una {{printerModel}}`,dropNotPrintable:`Solo i file .gcode e .gcode.3mf possono essere stampati`,dropToPrint:`Rilascia per stampare`,dropToQueue:`Rilascia per accodare`},archives:{media:{title:`Video della stampa`,download:`Scarica i video della stampa`,searching:`Ricerca dei video sulla stampante…`,searchFailed:`Impossibile cercare i video sulla stampante.`,none:`Non sono stati trovati timelapse o segmenti della videocamera IP per questa stampa.`,attachedTimelapse:`Timelapse allegato`,printerFiles:`File ancora presenti sulla stampante`,downloadSelected:`Scarica selezionati`,printerMissing:`La stampante non è più configurata`,timelapseUnavailable:`Impossibile leggere la cartella dei timelapse`,ipcamUnavailable:`Impossibile leggere la cartella della videocamera IP`},title:`Archivi di stampa`,no3mfBanner:{title:`Alcune stampe recenti non sono state archiviate con la miniatura`,body:`Lo slicer non ha lasciato il file .gcode.3mf sulla scheda SD della stampante, quindi Bambuddy non ha potuto recuperare né la miniatura né i metadati dello slicer. Solitamente accade perché "Memorizza file inviati su archiviazione esterna" è disattivato nello slicer (scheda Dispositivo di Bambu Studio / OrcaSlicer).`,docsLink:`Vedi passo 4 dell'installazione`,docsLinkInternalStorage:`Perché succede`,titleInternalStorage:`Alcune stampe recenti sono rimaste nella memoria interna della stampante`,bodyInternalStorage:`Bambu Studio ha messo il file elaborato nella memoria interna della stampante anziché sulla scheda, quindi Bambuddy non aveva nulla da leggere via FTP. Sulla serie H2, sulla P2S e sulla X2D il pulsante «Stampa» lo fa sempre: solo «Invia» offre una scelta, e anche quella è impostata su «Cache». Quelle stampe restano archiviate con nome e tempi, solo senza miniatura né metadati dello slicer. Per archivi completi, avvia la stampa da Bambuddy oppure elabora in OrcaSlicer, oppure in Bambu Studio usa «Invia» con «Esterna» e avvia la stampa dopo. Tutte richiedono una scheda o una chiavetta nella stampante.`,titleNoExternalStorage:`Alcune stampe recenti non sono state archiviate — nessuna memoria nella stampante`,bodyNoExternalStorage:`La stampante non rileva né scheda né chiavetta nel suo slot, quindi il file elaborato non aveva dove finire e Bambuddy nulla da leggere. Inseriscine una e la prossima stampa verrà archiviata per intero.`,titleInternalHistory:`Alcune stampe recenti sono partite da un file già presente sulla stampante`,bodyInternalHistory:`Quelle stampe sono uscite dalla libreria della stampante stessa: una ristampa dal suo schermo, un avvio da Handy o un file inviato prima e stampato dopo. Bambuddy legge i file di stampa via FTP, che serve solo la scheda o la chiavetta, mentre la stampante tiene quella libreria in un'area che l'FTP non raggiunge, quindi non c'era alcun 3MF da leggere. Nessuna impostazione dello slicer cambia questo, perché per queste stampe non è stato inviato nulla. Restano archiviate con nome e tempi, e «Modifica archivio» consente di inserire a mano il filamento usato. Per un archivio completo, avvia la stampa da Bambuddy o dal tuo slicer.`,titleFtpsCooloff:`Alcune stampe recenti non sono state archiviate — la stampante ha rifiutato la connessione dei file`,bodyFtpsCooloff:`Bambuddy ha aperto la porta di trasferimento file della stampante (FTPS 990) e la stampante ha risposto con qualcosa che non è TLS, quindi non è stato possibile leggere nulla. Quelle stampe restano archiviate con nome e tempi, solo senza miniatura né metadati dello slicer. Non è un'impostazione dello slicer né qualcosa che hai cambiato tu — gli stessi modelli e firmware funzionano normalmente su altre installazioni, e una stampante colpita di solito torna a funzionare da sola più tardi. Dopo un errore simile Bambuddy sospende i trasferimenti verso quella stampante per cinque minuti e ritorna a prendere il file al termine della pausa, così un episodio breve si risolve da sé; una scheda ancora vuota significa che il rifiuto è durato più del secondo tentativo. Non si sa ancora che cosa lo scateni. Se continua a capitare, attiva la registrazione di debug nella pagina Sistema e allega un pacchetto di supporto alla tua segnalazione.`,titleFtpTransferFailed:`Alcune stampe recenti non sono state archiviate: il trasferimento del file ha esaurito il tempo`,bodyFtpTransferFailed:`Il file elaborato era sulla scheda della stampante e la stampante lo ha effettivamente servito, ma il trasferimento non si è concluso nel tempo consentito. All'avvio della stampa la stampante gestisce anche la telecamera, i messaggi di stato e il caricamento del lavoro, e un 3MF di grandi dimensioni non sempre riesce a passare. Quelle stampe restano archiviate con nome e tempi, solo senza miniatura né metadati dello slicer. Non è un'impostazione dello slicer né qualcosa che hai cambiato. Bambuddy torna a prendere il file tre volte nei dieci minuti successivi, quindi la maggior parte dei casi si risolve da sola; una scheda ancora vuota significa che anche tutti quei tentativi hanno esaurito il tempo. Se continua a succedere, aumenta Timeout di connessione in Impostazioni > Rete > Nuovo tentativo FTP.`,dismissLabel:`Chiudi questo avviso`},searchPlaceholder:`Cerca archivi...`,filterByPrinter:`Filtra per stampante`,filterByStatus:`Filtra per stato`,sortBy:`Ordina per`,sortNewest:`Più recenti`,sortOldest:`Meno recenti`,sortName:`Nome`,sortDuration:`Durata`,sortLargest:`Più grandi`,sortSmallest:`Più piccoli`,sortSize:`Dimensione`,noArchives:`Nessun archivio trovato`,noArchivesSearch:`Nessun archivio corrisponde alla ricerca`,originalPrintNotVisible:`Stampa originale non visibile - prova a rimuovere i filtri`,noArchivesYet:`Nessun archivio ancora`,prints:`stampe`,pagination:{showing:`Mostrando`,to:`a`,of:`di`,show:`Mostra`,page:`Pagina`,all:`Tutti`},loadingArchives:`Caricamento archivi...`,releaseToUpload:`Rilascia per caricare`,showAll:`Mostra tutti`,showFavoritesOnly:`Solo preferiti`,gridView:`Vista griglia`,listView:`Vista elenco`,calendarView:`Vista calendario`,logView:`Registro stampe`,manageTags:`Gestisci tag`,showFailedPrints:`Mostra stampe fallite`,hideFailedPrints:`Nascondi stampe fallite`,hideDuplicates:`Nascondi duplicati`,viewOriginalPrint:`Fai clic per visualizzare la stampa originale (#{{id}})`,printTime:`Tempo di stampa`,filamentUsed:`Filamento usato`,cost:`Costo`,preview:`Anteprima`,deleteArchive:`Elimina archivio`,deleteConfirm:`Sei sicuro di eliminare questo archivio?`,favorite:`Preferito`,unfavorite:`Rimuovi dai preferiti`,viewDetails:`Vedi dettagli`,status:{completed:`Completato`,failed:`Fallito`,stopped:`Fermato`},toast:{source3mfAttached:`Sorgente 3MF allegata: {{filename}}`,failedUploadSource3mf:`Caricamento sorgente 3MF non riuscito`,source3mfRemoved:`Sorgente 3MF rimossa`,failedRemoveSource3mf:`Rimozione sorgente 3MF non riuscita`,f3dAttached:`F3D allegato: {{filename}}`,failedUploadF3d:`Caricamento F3D non riuscito`,f3dRemoved:`F3D rimosso`,failedRemoveF3d:`Rimozione F3D non riuscita`,timelapseAttached:`Timelapse allegato: {{filename}}`,timelapseAlreadyAttached:`Timelapse già allegato`,noMatchingTimelapse:`Nessun timelapse corrispondente`,failedScanTimelapse:`Scansione timelapse non riuscita`,failedAttachTimelapse:`Allegato timelapse non riuscito`,timelapseRemoved:`Timelapse rimosso`,failedRemoveTimelapse:`Impossibile rimuovere il timelapse`,timelapseUploaded:`Timelapse caricato: {{filename}}`,failedUploadTimelapse:`Impossibile caricare il timelapse`,archiveDeleted:`Archivio eliminato`,failedDeleteArchive:`Eliminazione archivio non riuscita`,addedToFavorites:`Aggiunto ai preferiti`,removedFromFavorites:`Rimosso dai preferiti`,projectUpdated:`Progetto aggiornato`,failedUpdateProject:`Aggiornamento progetto non riuscito`,linkCopied:`Link copiato negli appunti`,failedCopyLink:`Copia link non riuscita`,photoDeleted:`Foto eliminata`,failedDeletePhoto:`Eliminazione foto non riuscita`,failedDeleteArchives:`Eliminazione archivi non riuscita`,failedUpdateFavorites:`Aggiornamento preferiti non riuscito`,exportDownloaded:`Export scaricato`,exportFailed:`Export non riuscito`},menu:{print:`Stampa`,openInBambuStudio:`Apri nello slicer`,slice:`Slice`,externalLink:`Link esterno`,viewOnMakerWorld:`Vedi su MakerWorld`,preview3d:`Anteprima 3D`,viewTimelapse:`Vedi Timelapse`,scanForTimelapse:`Cerca Timelapse`,uploadTimelapse:`Carica timelapse`,removeTimelapse:`Rimuovi timelapse`,downloadSource3mf:`Scarica Sorgente 3MF`,uploadSource3mf:`Carica Sorgente 3MF`,replaceSource3mf:`Sostituisci Sorgente 3MF`,removeSource3mf:`Rimuovi Sorgente 3MF`,uploadF3d:`Carica F3D`,replaceF3d:`Sostituisci F3D`,downloadF3d:`Scarica F3D`,removeF3d:`Rimuovi F3D`,download:`Scarica`,copyDownloadLink:`Copia link download`,qrCode:`Codice QR`,viewPhotos:`Vedi foto`,viewPhotosCount:`Vedi foto ({{count}})`,projectPage:`Pagina progetto`,addToFavorites:`Aggiungi ai preferiti`,removeFromFavorites:`Rimuovi dai preferiti`,edit:`Modifica`,printLog:`Registro stampe`,goToProject:`Vai al progetto: {{name}}`,addToProject:`Aggiungi al progetto`,removeFromProject:`Rimuovi dal progetto`,loading:`Caricamento...`,noProjectsAvailable:`Nessun progetto disponibile`,searchProjects:`Cerca progetti…`,select:`Seleziona`,deselect:`Deseleziona`,delete:`Elimina`},permission:{noReprint:`Non hai il permesso di ristampare questo archivio`,noAddToQueue:`Non hai il permesso di aggiungere alla coda`,noUpdateArchives:`Non hai il permesso di aggiornare archivi`,noUploadFiles:`Non hai il permesso di caricare file`,noDownload:`Non hai il permesso di scaricare archivi`,noCopyLink:`Non hai il permesso di copiare link download`,noDelete:`Non hai il permesso di eliminare questo archivio`,noEdit:`Non hai il permesso di modificare questa voce`,noCreate:`Non hai il permesso di creare archivi`},platePicker:{title:`Seleziona la piastra da visualizzare`,hint:`Questo archivio contiene più piastre. Scegline una da aprire nel visualizzatore GCode.`,plateLabel:`Piastra {{index}}`,objectCount:`{{count}} oggetto`,objectCount_plural:`{{count}} oggetti`,noGcode:`Questo archivio non contiene G-code generato da visualizzare. Aprilo prima in Bambu Studio per sezionarlo.`},card:{previousPlate:`Piatto precedente`,nextPlate:`Piatto successivo`,plateNumber:`Piatto {{index}}`,moreOptions:`Clic destro per altre opzioni`,addToFavorites:`Aggiungi ai preferiti`,removeFromFavorites:`Rimuovi dai preferiti`,cancelled:`annullato`,failed:`fallito`,duplicate:`duplicato`,duplicateTitle:`Questo modello è stato stampato prima`,openSource3mf:`Apri sorgente 3MF in Bambu Studio (clic destro per altre opzioni)`,downloadF3d:`Scarica file design Fusion 360`,viewTimelapse:`Vedi timelapse`,viewPhoto:`Vedi 1 foto`,viewPhotos:`Vedi {{count}} foto`,openFolder:`Apri cartella: {{name}}`,slicedFile:`File slice - pronto a stampare`,sourceFile:`Solo file sorgente - nessuna mappatura AMS disponibile`,gcode:`GCODE`,source:`SOURCE`,project:`Progetto: {{name}}`,runsBadge:`{{count}} stampe`,runsBadgeTitle:`{{count}} stampe in totale — {{successful}} riuscite, {{failed}} fallite. Fai clic per vedere il registro completo.`,estimated:`Stimato: {{time}}`,actual:`Reale: {{time}}`,accuracy:`Accuratezza: {{percent}}%`,filament:`{{weight}} g`,layer:`{{count}} strato`,layers:`{{count}} strati`,object:`{{count}} oggetto`,objects:`{{count}} oggetti`,slicedFor:`Sliced per {{model}}`,uploadedBy:`Caricato da`,noPermissionReprint:`Non hai il permesso di ristampare`,noFileForReprint:`Nessun file 3MF disponibile — il file non è stato scaricato dalla stampante durante la registrazione`,slicerAmsMapping:`Mappatura AMS salvata ({{printer}})`,slicerAmsMappingTooltip:`La scelta dello slot AMS fatta dallo slicer è stata salvata per {{printer}}. I numeri di slot hanno senso solo su quella stampante, quindi una ristampa li riutilizza solo se torna su {{printer}}.`,noPermissionEdit:`Non hai il permesso di modificare archivi`,noPermissionDelete:`Non hai il permesso di eliminare archivi`,openInBambuStudio:`Apri nello slicer`,openInBambuStudioToSlice:`Apri nello slicer per slicing`,slice:`Slice`,externalLink:`Link esterno`,makerWorld:`MakerWorld – {{designer}}`,viewProject:`Vedi progetto`,noExternalLink:`Nessun link esterno`,preview3d:`Anteprima 3D`,download:`Scarica`,edit:`Modifica`,delete:`Elimina`},runLog:{title:`Registro stampe`,modalTitle:`Registro stampe — {{name}}`,modalTitleFallback:`questo archivio`,empty:`Nessun evento di stampa ancora registrato per questo archivio.`,col:{date:`Data`,status:`Stato`,duration:`Durata`,filament:`Filamento`,cost:`Costo`},status:{completed:`Completata`,failed:`Fallita`,cancelled:`Annullata`,stopped:`Interrotta`,skipped:`Saltata`,printing:`In stampa`}},modal:{deleteArchive:`Elimina Archivio`,deleteConfirm:`Sei sicuro di eliminare "{{name}}"? Questa azione non può essere annullata.`,deleteButton:`Elimina`,deletePurgeStats:`Rimuovi anche questa stampa dalle Quick Stats (filamento, tempo, costo, energia)`,deleteQueueItemsWarning:`{{count}} elemento/i in coda collegato/i a questo archivio verrà/verranno rimosso/i.`,deleteBlockedByPrinting:`Impossibile eliminare — {{count}} elemento/i in coda sono attualmente in stampa. Interrompi la stampa, poi riprova.`,removeSource3mf:`Rimuovi Sorgente 3MF`,removeSource3mfConfirm:`Sei sicuro di rimuovere il file sorgente 3MF da "{{name}}"? Questo eliminerà il progetto slicer originale.`,removeButton:`Rimuovi`,removeF3d:`Rimuovi F3D`,removeF3dConfirm:`Sei sicuro di rimuovere il file Fusion 360 da "{{name}}"?`,removeTimelapse:`Rimuovi timelapse`,removeTimelapseConfirm:`Sei sicuro di voler rimuovere il video timelapse da "{{name}}"?`,timelapse:`{{name}} – Timelapse`,selectTimelapse:`Seleziona Timelapse`,selectTimelapseDesc:`Nessun abbinamento automatico trovato. Seleziona il timelapse per questa stampa:`,deleteArchives:`Elimina Archivi`,deleteArchivesConfirm:`Sei sicuro di eliminare {{count}} archivio(i)? Questa azione non può essere annullata.`,deleteCount:`Elimina {{count}}`},page:{title:`Archivi`,printsCount:`{{filtered}} di {{total}} stampe`,dropFilesHere:`Rilascia file .3mf qui`,releaseToUpload:`Rilascia per caricare`,only3mfSupported:`Solo file .3mf supportati`,close:`Chiudi`,selected:`{{count}} selezionati`,selectAll:`Seleziona tutto`,tags:`Tag`,project:`Progetto`,favorite:`Preferito`,delete:`Elimina`,toggledFavorites:`Preferiti aggiornati per {{count}} archivio(i)`,failedUpdateFavorites:`Aggiornamento preferiti non riuscito`,archivesDeleted:`{{count}} archivio(i) eliminati`,failedDeleteArchives:`Eliminazione archivi non riuscita`,photoDeleted:`Foto eliminata`,failedDeletePhoto:`Eliminazione foto non riuscita`},list:{name:`Nome`,printer:`Stampante`,date:`Data`,size:`Dimensione`,actions:`Azioni`,hasTimelapse:`Ha timelapse`},log:{date:`Data`,printName:`Nome stampa`,printer:`Stampante`,user:`Utente`,status:`Stato`,duration:`Durata`,filament:`Filamento`,filamentUsed:`Filamento usato`,cost:`Costo`,energy:`Energia`,energyCost:`Costo energia`,completedAt:`Completato`,columns:`Colonne`,sortBy:`Ordina per {{column}}`,allPrinters:`Tutte le stampanti`,allUsers:`Tutti gli utenti`,allStatuses:`Tutti gli stati`,cancelled:`Annullato`,skipped:`Saltato`,dateFrom:`Dal`,dateTo:`Al`,noEntries:`Nessuna voce di registro trovata`,showing:`{{count}} di {{total}} voci`,rowsPerPage:`Righe`,page:`Pagina`,prev:`Prec.`,next:`Succ.`,clearLog:`Cancella registro`,clearLogTitle:`Cancella registro stampe`,clearLogConfirm:`Tutte le voci del registro di stampa verranno eliminate permanentemente. Gli archivi e gli elementi della coda non sono interessati. Questa azione non può essere annullata. Sei sicuro?`,clearLogButton:`Cancella tutto`,cleared:`{{count}} voci di registro cancellate`,clearFailed:`Impossibile cancellare il registro stampe`,deleteEntryTitle:`Elimina voce del registro stampe`,deleteEntryConfirm:`Questa voce verrà rimossa dal registro e i suoi contributi di filamento, tempo e costo verranno scartati dalle statistiche rapide. L'archivio corrispondente (se presente) non è interessato. Questa azione non può essere annullata.`,entryDeleted:`Voce del registro stampe eliminata`,entryDeleteFailed:`Impossibile eliminare la voce del registro stampe`,editEntryTitle:`Modifica voce del registro stampe`,editEntryDescription:`Classifica questa stampa. Il widget Analisi guasti raggruppa per questi valori, quindi gli aggiornamenti vengono riflessi immediatamente nelle statistiche.`,entryUpdated:`Voce del registro aggiornata`,entryUpdateFailed:`Impossibile aggiornare la voce del registro`,statuses:{completed:`Completata`,failed:`Fallita`,stopped:`Fermata`,cancelled:`Annullata`,skipped:`Saltata`}}},dispatchToast:{untitled:`Lavoro di stampa`,startingPrints:`Avvio delle stampe`,progressSummary:`{{complete}}/{{total}} completate • In corso: {{processing}}`,expandDetails:`Espandi i dettagli dell'invio`,collapseDetails:`Comprimi i dettagli dell'invio`,awaitingPrinter:`In attesa della stampante…`,status:{processing:`In corso`,completed:`Completata`,failed:`Fallita`},failed:{generic:`Invio fallito`,upload_failed:`Caricamento sulla stampante fallito`,start_command_failed:`La stampante ha rifiutato il comando di avvio`},dismiss:`Chiudi`},pipelineRuns:{title:`Esecuzioni pipeline`,loading:`Caricamento…`,empty:`Nessuna esecuzione di pipeline ancora.`,filter:{pipeline:`Pipeline`,status:`Stato`,target:`Destinazione`,all:`Tutte`,allPipelines:`Tutte le pipeline`,allStatus:`Tutti gli stati`,allTargets:`Tutte le destinazioni`,clear:`Pulisci filtri`,noMatches:`Nessuna esecuzione corrisponde ai filtri attuali.`},totalCount_one:`{{n}} esecuzione`,totalCount_other:`{{n}} esecuzioni`,copies:`{{n}} copie`,failedCount:`{{n}} fallite`,copyN:`Copia {{n}}`,retryFailed:`Riprova fallite`,retryOf:`ritentativo di #{{n}}`,pagination:`{{start}}–{{end}} di {{total}}`,toast:{cancelled:`Esecuzione annullata`,cancelFailed:`Annullamento fallito`,retryStarted:`Ritentativo avviato`,retryFailed:`Ritentativo fallito`,cleared:`{{n}} esecuzioni eliminate`,clearFailed:`Eliminazione fallita`},clearLog:`Cancella cronologia`,clearConfirmTitle:`Cancellare la cronologia?`,clearConfirmBody:`Eliminare tutte le esecuzioni di pipeline completate, fallite, annullate e con fallimento parziale? Le esecuzioni in corso sono conservate. Questa operazione non può essere annullata.`,clearConfirmAction:`Cancella`,jobStatus:{pending:`in attesa`,awaiting_printer:`in attesa stampante`,queued:`in coda`,printing:`stampa`,completed:`completata`,failed:`fallita`,cancelled:`annullata`},cancelledByUser:`Annullato dall'utente`},queue:{filamentShort:{rowBadge:`Filamento insufficiente per la bobina assegnata`,rowTooltip:`Lo scheduler ha segnalato questo elemento. Premi Play per vedere il deficit per slot e decidere se stampare comunque.`,confirmTitle:`Filamento insufficiente`,confirmIntro:`La bobina assegnata non puo coprire almeno uno slot. Stampare comunque?`,lineItem:`Slot {{slot}}: servono {{required}} g, rimangono {{remaining}} g`,unknown:`sconosciuto`,printAnyway:`Stampa comunque`},slicerAmsMapping:{rowBadge:`Slot AMS salvati per questa stampante`,rowTooltip:`Questo archivio conserva gli slot AMS esatti scelti dallo slicer, salvati per la stampante di questo elemento. Una ristampa su di essa può riutilizzare quelle bobine invece di rifare l'abbinamento per tipo e colore.`},title:`Coda di stampa`,subtitle:`Programma e gestisci i tuoi lavori di stampa`,editQueueItem:`Modifica elemento coda`,selectAllPlates:`Seleziona tutte le {{count}} piastre`,deselectAll:`Deseleziona tutto`,printQueued:`Stampa in coda`,printQueuedWillStartWhenIdle:`Si avvierà quando la stampante sarà inattiva`,itemsQueued:`{{count}} elementi in coda`,sending:`Invio...`,sendingProgress:`Invio {{current}}/{{total}}...`,adding:`Aggiunta...`,addingProgress:`Aggiunta {{current}}/{{total}}...`,savingProgress:`Salvataggio {{current}}/{{total}}...`,clearQueue:`Svuota coda`,clearHistory:`Svuota cronologia`,emptyQueue:`La coda è vuota`,position:`Posizione`,scheduledTime:`Ora programmata`,moveUp:`Sposta su`,moveDown:`Sposta giù`,startNow:`Avvia ora`,printingInProgress:`Stampa in corso...`,viewArchive:`Vedi archivio`,viewInFileManager:`Vedi nel Gestore file`,itemCount:`{{count}} elemento`,itemCount_plural:`{{count}} elementi`,dragToReorder:`Trascina per riordinare (solo ASAP)`,reorderHint:`La posizione influisce solo sugli elementi ASAP. Quelli programmati partono all'orario.`,sjf:{label:`SJF`,tooltip:`Lavoro più breve prima — lo scheduler dà priorità alle stampe più brevi`},addedBy:`Aggiunto da {{name}}`,nextInQueue:`Prossimo in coda`,clearPlateSuccess:`Piatto liberato — pronto per la prossima stampa`,plateNumber:`Piatto {{index}}`,quantity:`Quantità`,quantityHint:`Crea {{count}} elementi in coda`,plateQuantityLabel:`Stampe di {{plate}}`,plateQuantityTotal_one:`{{count}} stampa in totale`,plateQuantityTotal_other:`{{count}} stampe in totale`,batchOrders:{title:`Ordini in lotto`,emptyTitle:`Nessun ordine in lotto`,emptyDescription:`Metti in coda un file multi-piatto, o più copie di un piatto, e l'ordine compare qui con il suo avanzamento.`,filter:{active:`Attivi`,completed:`Completati`,cancelled:`Annullati`,all:`Tutti`},status:{active:`Attivo`,completed:`Completato`,cancelled:`Annullato`},noTargets:`Solo raggruppamento`,noTargetsHint:`Creato prima delle quantità per piatto: tiene traccia delle stampe in coda anziché di un obiettivo.`,dispatchRemaining:`Accoda {{count}} rimanenti`,dispatchPlate:`Accoda le rimanenti`,strandedPlate:`Nessuna impostazione da copiare`,strandedNotice:`Impossibile accodare {{runs}} delle {{owed}} stampe ancora dovute: per quella piastra non resta alcuna stampa in coda o completata da cui copiare le impostazioni. Accoda la piastra una volta dal file oppure annulla la commessa.`,dispatched:`Stampe rimanenti accodate per {{name}}`,plateProgress:`{{completed}} di {{target}} fatte`,remaining:`{{count}} ancora dovute`,failed:`{{count}} fallite`,printing:`{{count}} in stampa`,wholeFile:`Intero file`,due:`Scadenza {{date}}`,costSoFar:`{{amount}} finora`,costRemaining:`({{amount}} da spendere)`},activeBatches:`Lotti attivi`,batchProgress:`{{completed}} di {{total}} completati`,cancelBatch:`Annulla rimanenti`,batchCancelled:`Elementi rimanenti del lotto annullati`,cancelBatchConfirmTitle:`Annulla lotto`,cancelBatchConfirmMessage:`Chiudere questa commessa? Le stampe ancora in coda vengono annullate e la commessa smette di richiedere ciò che non ha prodotto.`,batch:{defaultName:`Lotto`,label:`{{count}} elemento`,label_plural:`{{count}} elementi`,pendingCount:`{{count}} in attesa`,pendingCount_plural:`{{count}} in attesa`,expand:`Espandi lotto`,collapse:`Comprimi lotto`,groupAsBatch:`Raggruppa come lotto…`,groupAsBatchDescription:`Combina gli {{count}} elementi selezionati in un unico lotto comprimibile.`,nameLabel:`Nome lotto`,namePlaceholder:`es. Regali del venerdì`,create:`Crea lotto`,ungroup:`Separa`,ungroupConfirmTitle:`Separare il lotto?`,ungroupConfirmMessage:`Gli elementi resteranno in coda ma non saranno più raggruppati.`,dragGroup:`Trascina gruppo`},tabs:{batches:`Lotti`,queue:`Coda`,history:`Cronologia`,timeline:`Linea temporale`,pipelines:`Pipeline`},layout:{flatList:`Elenco`,byPrinter:`Per stampante`,groupByPrinter:`Raggruppa per stampante`},history:{emptyTitle:`Nessuna cronologia`,emptyDescription:`Le stampe completate, annullate e fallite appariranno qui.`,showMore:`Mostra altri`,showingCount:`Visualizzati {{shown}} di {{total}}`},dragGhost:{multiCount:`{{count}} elementi`,batch:`{{name}} ({{count}} copia)`,batch_plural:`{{name}} ({{count}} copie)`},sections:{currentlyPrinting:`In stampa`,queued:`In coda`,history:`Cronologia`},status:{pending:`In attesa`,waiting:`In attesa`,printing:`In stampa`,paused:`In pausa`,completed:`Completato`,failed:`Fallito`,skipped:`Saltato`,cancelled:`Annullato`},summary:{printing:`In stampa`,queued:`In coda`,totalTime:`Tempo totale coda`,totalWeight:`Peso totale della coda`,history:`Cronologia`},filter:{allPrinters:`Tutte le stampanti`,unassigned:`Non assegnato`,allStatus:`Tutti gli stati`,allLocations:`Tutte le posizioni`,any:`Qualsiasi`},sort:{byPosition:`Ordina per posizione`,byName:`Ordina per nome`,byPrinter:`Ordina per stampante`,bySchedule:`Ordina per programma`,byDate:`Ordina per data`,ascendingOldest:`Crescente (più vecchi)`,descendingNewest:`Decrescente (più recenti)`},badges:{staged:`In staging`,requiresPrevious:`Richiede successo precedente`,autoPowerOff:`Spegnimento automatico`,gcodeInjection:`G-code`},empty:{title:`Nessuna stampa programmata`,description:`Programma una stampa dalla pagina Archivi usando l'opzione "Programma" nel menu contestuale, o trascina i file per iniziare.`},time:{etaIfStartedNow:`Orario di completamento se questo lavoro iniziasse ora`,whenFree:`Quando una stampante è libera`,overdue:`Scaduto`,now:`Ora`,lessThanMinute:`Tra meno di un minuto`,inMinutes:`Tra {{count}} min`,inHours:`Tra {{count}} ore`},actions:{startPrint:`Avvia Stampa`,stopPrint:`Ferma Stampa`,requeue:`Rimetti in coda`},bulkEdit:{title:`Modifica {{count}} elemento`,title_plural:`Modifica {{count}} elementi`,description:`Solo le impostazioni modificate saranno applicate agli elementi selezionati.`,printer:`Stampante`,noChange:`— Nessun cambio —`,queueOptions:`Opzioni coda`,staged:`In staging (avvio manuale)`,autoPowerOff:`Spegnimento automatico dopo stampa`,requirePrevious:`Richiede successo precedente`,gcodeInjection:`Inietta G-code`,printOptions:`Opzioni stampa`,bedLevelling:`Livellamento piatto`,flowCalibration:`Calibrazione flusso`,vibrationCalibration:`Calibrazione vibrazioni`,layerInspection:`Controllo primo layer`,timelapse:`Timelapse`,useAms:`Usa AMS`,nozzleOffsetCali:`Calibrazione offset ugelli`,applyChanges:`Applica modifiche`,selectAll:`Seleziona tutto`,deselectAll:`Deseleziona tutto`,selected:`{{count}} selezionati`,editSelected:`Modifica selezionati`,cancelSelected:`Annulla selezionati`},confirm:{cancelTitle:`Annulla stampa programmata`,cancelMessage:`Sei sicuro di annullare "{{name}}"?`,stopTitle:`Ferma Stampa`,stopMessage:`Sei sicuro di fermare la stampa corrente "{{name}}"? Questo annullerà il lavoro sulla stampante.`,removeTitle:`Rimuovi dalla cronologia`,removeMessage:`Sei sicuro di rimuovere "{{name}}" dalla cronologia coda?`,clearHistoryTitle:`Svuota cronologia`,clearHistoryMessage:`Sei sicuro di rimuovere {{count}} elemento(i) dalla cronologia?`,cancelButton:`Annulla Stampa`,stopButton:`Ferma Stampa`,thisPrint:`questa stampa`,thisItem:`questo elemento`},toast:{cancelled:`Elemento coda annullato`,cancelFailed:`Annullamento non riuscito`,removed:`Elemento coda rimosso`,keptForOrder:`Annullato anziché rimosso: è l'unica stampa da cui la commessa può riaccodare questa piastra`,historyKeptForOrders:`{{kept}} conservate perché servono ancora alle commesse.`,removeFailed:`Rimozione non riuscita`,stopped:`Stampa fermata`,stopFailed:`Impossibile fermare stampa`,released:`Stampa rilasciata in coda`,startFailed:`Avvio stampa non riuscito`,reorderFailed:`Riordino coda non riuscito`,historyCleared:`Cancellati {{count}} elementi cronologia`,clearHistoryFailed:`Svuotamento cronologia non riuscito`,updateFailed:`Aggiornamento elementi non riuscito`,bulkCancelled:`Annullati {{count}} elementi`,bulkCancelFailed:`Annullamento elementi non riuscito`,batchCreated:`Lotto «{{name}}» creato`,batchCreateFailed:`Creazione lotto non riuscita`,batchUngrouped:`{{count}} elemento/i separato/i`,batchUngroupFailed:`Separazione del lotto non riuscita`,resumedAfterFailure:`Coda ripresa — {{restored}} processo/i ripristinato/i come in attesa`,resumeAfterFailureFailed:`Ripresa della coda non riuscita`},resumeAfterFailure:{banner:`{{printer}} è bloccata da un errore di stampa precedente — {{count}} processo/i saltato/i`,bannerHint:`Risolvi il problema della stampante, poi riprendi per ripristinare i processi saltati e rimuovere il blocco.`,button:`Riprendi dopo errore`,confirmTitle:`Riprendere la coda dopo l'errore?`,confirmMessage:`Ripristinare {{count}} processo/i saltato/i su {{printer}} come in attesa e rimuovere il blocco della stampa precedente. Assicurati che la stampante sia pronta prima di continuare.`},timeline:{listView:`Lista`,timelineView:`Cronologia`,unassigned:`Non assegnato`,noData:`Nessuna stampa programmata per questo giorno`,nothingCommitted:`Nessuna pianificazione confermata in questa finestra. Elementi preparati, in attesa e ASAP su stampanti inattive non sono mostrati — imposta un orario pianificato o rilascia un elemento preparato per vederlo qui.`,allDoneBy:`Tutte le stampe completate entro le {{time}}`,staged:`In attesa`,filterAll:`Mostra tutto`,filterPrinting:`In stampa`,filterQueued:`In coda`,time:{anyMoment:`a momenti`,minutesLeft:`{{minutes}}m rimanenti`,hoursLeft:`{{hours}}h rimanenti`,hoursMinutesLeft:`{{hours}}h {{minutes}}m rimanenti`},day:{previous:`Giorno precedente`,next:`Giorno successivo`,today:`Oggi`},window:{back12h:`Indietro di 12 ore`,forward12h:`Avanti di 12 ore`,now:`Adesso`},printerColumnHeader:`Stampante`},permissions:{noStopPrint:`Non hai il permesso di fermare stampe`,noStartPrint:`Non hai il permesso di avviare stampe`,noEdit:`Non hai il permesso di modificare questo elemento coda`,noCancel:`Non hai il permesso di annullare questo elemento coda`,noRequeue:`Non hai il permesso di rimettere in coda elementi`,noRemove:`Non hai il permesso di rimuovere questo elemento coda`,noClearHistory:`Non hai il permesso di svuotare tutta la cronologia`,noEditItems:`Non hai il permesso di modificare elementi coda`,noCancelItems:`Non hai il permesso di annullare elementi coda`}},stats:{title:`Statistiche`,subtitle:`Trascina i widget per riordinare. Clicca l'icona occhio per nascondere.`,overview:`Panoramica`,totalPrints:`Stampe totali`,successRate:`Tasso di successo`,totalPrintTime:`Tempo totale di stampa`,printTime:`Tempo di stampa`,totalFilament:`Filamento totale usato`,filamentUsed:`Filamento usato`,filamentCost:`Costo filamento`,totalCost:`Costo totale`,energyUsed:`Energia usata`,energyCost:`Costo energia`,energyWarmingUpTooltip:`Il tracciamento energia sta ancora raccogliendo snapshot orari. I totali per intervallo diventeranno accurati quando esisterà almeno uno snapshot prima dell’intervallo selezionato. I primi valori potrebbero essere sottostimati.`,averagePrintTime:`Tempo medio di stampa`,printsPerDay:`Stampe al giorno`,byPrinter:`Per stampante`,printsByPrinter:`Stampe per stampante`,byMaterial:`Per materiale`,byMonth:`Per mese`,last7Days:`Ultimi 7 giorni`,last30Days:`Ultimi 30 giorni`,last90Days:`Ultimi 90 giorni`,allTime:`Sempre`,quickStats:`Statistiche rapide`,printActivity:`Attivita di stampa`,filamentTypes:`Tipi di filamento`,filamentTrends:`Trend filamento`,failureAnalysis:`Analisi guasti`,timeAccuracy:`Accuratezza tempo`,successful:`Riuscite:`,failed:`Fallite:`,cancelled:`Annullate:`,perfectEstimate:`100% = stima perfetta`,noTimeAccuracyData:`Nessun dato accuratezza tempo`,noFilamentData:`Nessun dato filamento`,noPrinterData:`Nessun dato stampante`,noPrintData:`Nessun dato stampa`,noPrintDataLast30Days:`Nessun dato stampa negli ultimi 30 giorni`,failureReasons:`Cause guasto`,topFailureReasons:`Cause principali`,failedPrintsCount:`{{failed}} / {{total}} stampe fallite`,lastWeekRate:`Settimana scorsa: {{rate}}%`,resetLayout:`Reimposta layout`,recalculateCosts:`Ricalcola costi`,recalculateCostsHint:`Ricalcola tutti i costi archivi usando i prezzi filamento correnti`,exportStats:`Esporta statistiche`,exportAsCsv:`Esporta come CSV`,exportAsExcel:`Esporta come Excel`,hiddenCount:`{{count}} Nascosti`,exportDownloaded:`Export scaricato`,exportFailed:`Export non riuscito`,layoutReset:`Layout reimpostato`,recalculatedCosts:`Costi ricalcolati per {{count}} archivi`,recalculateFailed:`Ricalcolo costi non riuscito`,loadingStats:`Caricamento statistiche...`,noPermissionResetLayout:`Non hai il permesso di reimpostare il layout`,noPermissionRecalculate:`Non hai il permesso di ricalcolare i costi`,noPrintDataInRange:`Nessun dato nel periodo selezionato`,periodFilament:`Filamento utilizzato`,periodCost:`Costo`,avgPerPrint:`Media per stampa`,usageOverTime:`Utilizzo nel tempo`,energyOverTime:`Energia nel tempo`,filamentByWeight:`Peso`,printDuration:`Durata stampa`,printerUtilization:`Utilizzo stampante`,filamentSuccess:`Successo per materiale`,printHabits:`Abitudini di stampa`,printTimeOfDay:`Ora di stampa`,colorDistribution:`Distribuzione colori`,noColorData:`Nessun dato colore disponibile`,records:`Record`,longestPrint:`Stampa più lunga`,heaviestPrint:`Stampa più pesante`,mostExpensivePrint:`Più costosa`,busiestDay:`Giorno più attivo`,successStreak:`Serie di successi`,streakPrint:`stampa consecutiva`,streakPrints:`{{count}} stampe consecutive`,printerStats:`Statistiche stampante`,hours:`ore`,avgPrints:`Media stampe`,noArchiveData:`Nessun dato di stampa disponibile`,filamentByTime:`Tempo`,avgWeight:`Media peso`,avgTime:`Media tempo`,filamentByPrints:`Stampe`,timeframe:{today:`Oggi`,"this-week":`Questa settimana`,"this-month":`Questo mese`,"last-7":`Ultimi 7 giorni`,"last-30":`Ultimi 30 giorni`,"last-90":`Ultimi 90 giorni`,"this-year":`Quest'anno`,"all-time":`Tutto`,custom:`Personalizzato`,from:`Da`,to:`A`},allUsers:`Tutti gli utenti`,noUser:`Nessun utente (Sistema)`,filterByUser:`Filtra per utente`},maintenance:{title:`Manutenzione`,overview:`Panoramica`,allOk:`Tutta la manutenzione aggiornata`,dueCount:`{{count}} elemento in scadenza`,dueCount_plural:`{{count}} elementi in scadenza`,warningCount:`{{count}} avviso`,warningCount_plural:`{{count}} avvisi`,totalPrintTime:`Tempo totale di stampa`,nextMaintenance:`Prossima manutenzione`,nothingDue:`Niente in scadenza`,tasks:`Attivita`,lastPerformed:`Ultima esecuzione`,interval:`Intervallo`,hoursRemaining:`{{hours}}h rimanenti`,hoursOverdue:`{{hours}}h in ritardo`,markDone:`Segna come fatto`,performMaintenance:`Esegui manutenzione`,history:`Cronologia`,noHistory:`Nessuna cronologia manutenzione`,editPrintHours:`Modifica ore stampa`,currentHours:`Ore attuali`,statusTab:`Stato`,settingsTab:`Impostazioni`,overdueCount:`{{count}} in ritardo`,dueSoonCount:`{{count}} in scadenza`,dueSoon:`In scadenza`,allGood:`Tutto ok`,overdueBy:`In ritardo di {{duration}}`,dueIn:`Scade tra {{duration}}`,timeLeft:`{{duration}} rimanenti`,day:`1 giorno`,days:`{{count}} giorni`,week:`1 settimana`,weeks:`{{count}} settimane`,month:`1 mese`,months:`{{count}} mesi`,year:`1 anno`,maintenanceTypes:`Tipi di manutenzione`,maintenanceTypesDescription:`Tipi di sistema e tue attivita personalizzate`,addCustomType:`Aggiungi tipo personalizzato`,restoreDefaults:`Ripristina attivita predefinite`,intervalType:`Tipo intervallo`,intervalValue:`Intervallo ({{type}})`,icon:`Icona`,documentationLink:`Link documentazione (opzionale)`,assignToPrinters:`Assegna alle stampanti`,selectAtLeastOnePrinter:`Seleziona almeno una stampante`,addType:`Aggiungi tipo`,custom:`Personalizzato`,printHours:`Ore di stampa`,calendarDays:`Giorni calendario`,exampleName:`es. Sostituisci filtro HEPA`,viewDocumentation:`Vedi documentazione`,timeBasedInterval:`Intervallo basato sul tempo`,intervalOverrides:`Override intervallo`,intervalOverridesDescription:`Personalizza intervalli per stampanti specifiche`,assignedToPrinters:`Assegnato alle stampanti:`,noPrintersAssigned:`Nessuna stampante assegnata`,addPrinterShort:`Aggiungi:`,printersAssignedClick:`{{count}} stampante(i) assegnata - clicca per gestire`,removeFromPrinter:`Rimuovi da questa stampante`,types:{lubricateCarbonRods:`Lubrifica aste in carbonio`,lubricateRails:`Lubrifica guide lineari`,cleanNozzle:`Pulisci ugello/Hotend`,checkBelts:`Controlla tensione cinghie`,cleanBuildPlate:`Pulisci piatto`,checkExtruder:`Controlla ingranaggi estrusore`,checkCooling:`Controlla ventole raffreddamento`,generalInspection:`Ispezione generale`,cleanCarbonRods:`Pulisci aste in carbonio`,lubricateSteelRods:`Lubrifica aste in acciaio`,cleanSteelRods:`Pulisci aste in acciaio`,cleanLinearRails:`Pulisci guide lineari`,checkPtfeTube:`Controlla tubo PTFE`,replaceHepaFilter:`Sostituisci filtro HEPA`,replaceCarbonFilter:`Sostituisci filtro carbone`,lubricateLeftNozzleRail:`Lubrifica guida ugello sinistro`},maintenanceComplete:`Manutenzione segnata come completata`,typeUpdated:`Tipo manutenzione aggiornato`,typeDeleted:`Tipo manutenzione eliminato`,defaultsRestored:`Ripristinate {{count}} attivita predefinite`,printHoursUpdated:`Ore di stampa aggiornate`,printerAssigned:`Stampante assegnata`,printerRemoved:`Stampante rimossa`,deleteTypeConfirm:`Eliminare "{{name}}"?`,deleteSystemTypeTitle:`Eliminare attività di manutenzione predefinita?`,deleteSystemTypeMessage:`Sei sicuro di voler eliminare l'attività di manutenzione predefinita "{{name}}"?`,noPermissionUpdate:`Non hai il permesso di aggiornare elementi manutenzione`,noPermissionPerform:`Non hai il permesso di eseguire manutenzione`,noPermissionEditTypes:`Non hai il permesso di modificare tipi manutenzione`,noPermissionDeleteTypes:`Non hai il permesso di eliminare tipi manutenzione`,noPermissionEditHours:`Non hai il permesso di modificare ore stampa`,noPermissionRemovePrinter:`Non hai il permesso di rimuovere assegnazioni stampanti`,noPermissionAssignPrinter:`Non hai il permesso di assegnare stampanti`,noPermissionEditIntervals:`Non hai il permesso di modificare intervalli`,configureSettings:`Configura tipi e intervalli manutenzione`},settings:{sliceEngine:`Motore di slicing`,sliceEngineSidecar:`Sidecar del server`,sliceEngineSidecarHint:`Lo slicing viene eseguito sul server, nel container sidecar dello slicer.`,sliceEngineBrowser:`Nel browser`,sliceEngineBrowserHint:`Lo slicing viene eseguito su questo dispositivo, senza server.`,title:`Impostazioni`,general:`Generale`,tabs:{general:`Generale`,smartPlugs:`Prese smart`,sensors:`Sensori`,notifications:`Notifiche`,queue:`Flusso`,queueDispatch:`Coda e Dispatch`,queuePipelines:`Pipeline`,filament:`Filamento`,network:`Rete`,apiKeys:`Chiavi API`,virtualPrinter:`Stampante virtuale`,failureDetection:`Rilevamento guasti`,users:`Utenti`,backup:`Backup`,emailAuth:`Autenticazione Email`,ldap:`LDAP`,twoFa:`Autenticazione 2FA`,oidc:`SSO / OIDC`,security:`Sicurezza`,spoolbuddy:`SpoolBuddy`},ldap:{title:`Autenticazione LDAP`,enabledDesc:`L'autenticazione LDAP è attiva`,disabledDesc:`L'autenticazione LDAP è disattivata`,disabledHint:`Configura e salva le impostazioni LDAP qui sotto, poi attiva.`,enabled:`Autenticazione LDAP attivata`,disabled:`Autenticazione LDAP disattivata`,feature1:`Gli utenti possono accedere con le credenziali LDAP`,feature2:`L'account amministratore locale rimane come fallback`,feature3:`I gruppi LDAP vengono mappati ai gruppi BamBuddy al login`,serverConfig:`Configurazione server LDAP`,serverUrl:`URL del server`,serverUrlHint:`Usa ldap:// per standard o ldaps:// per connessioni SSL`,security:`Sicurezza`,securityHint:`StartTLS aggiorna una connessione semplice a TLS. LDAPS usa TLS fin dall'inizio.`,bindDn:`Bind DN (account di servizio)`,bindPassword:`Password Bind`,searchBase:`Base DN di ricerca`,userFilter:`Filtro di ricerca utente`,userFilterHint:`{username} viene sostituito con il nome utente. Usa (uid={username}) per OpenLDAP.`,advanced:`Avanzate`,autoProvision:`Provisioning automatico utenti`,autoProvisionHint:`Crea automaticamente un account BamBuddy al primo accesso LDAP`,defaultGroup:`Gruppo predefinito`,defaultGroupNone:`— Nessuno (nessun fallback) —`,defaultGroupHint:`Gruppo di fallback assegnato quando un utente LDAP si autentica ma non è presente in nessun gruppo LDAP mappato. Lascia vuoto per lasciare gli utenti non mappati senza autorizzazioni.`,groupMapping:`Mappatura gruppi (JSON)`,groupMappingHint:`Mappa i DN dei gruppi LDAP ai gruppi BamBuddy. Gruppi disponibili: `,testConnection:`Test connessione`,settingsSaved:`Impostazioni LDAP salvate`,errors:{serverRequired:`L'URL del server LDAP è obbligatorio`,searchBaseRequired:`Il Base DN di ricerca è obbligatorio`,enableAuthFirst:`Attiva prima l'autenticazione`,configureLdapFirst:`Salva prima le impostazioni LDAP`}},email:{smtpSettings:`Configurazione SMTP`,smtpHost:`Server SMTP`,smtpPort:`Porta SMTP`,security:`Sicurezza`,authentication:`Autenticazione`,username:`Nome utente`,password:`Password`,fromEmail:`Email mittente`,fromName:`Nome mittente`,testConnection:`Testa connessione SMTP`,testRecipient:`Email destinatario test`,sendTest:`Invia email di test`,sending:`Invio...`,save:`Salva impostazioni`,saving:`Salvataggio...`,advancedAuth:`Autenticazione avanzata`,advancedAuthEnabled:`L'autenticazione avanzata è abilitata`,advancedAuthEnabledDesc:`Le funzionalità di gestione utenti via email sono attive. I nuovi utenti riceveranno password generate automaticamente via email e potranno reimpostare la password tramite la funzione di recupero.`,advancedAuthDisabled:`L'autenticazione avanzata è disabilitata`,advancedAuthDisabledDesc:`Abilita l'autenticazione avanzata per attivare le funzionalità email per la gestione utenti.`,enable:`Abilita`,disable:`Disabilita`,feature1:`Le password vengono generate automaticamente e inviate via email ai nuovi utenti`,feature2:`Gli utenti possono accedere con nome utente o email`,feature3:`La funzione di recupero password è disponibile`,feature4:`Gli amministratori possono reimpostare le password utente via email`,errors:{requiredFields:`Compilare tutti i campi obbligatori`,usernameRequired:`Il nome utente è obbligatorio quando l'autenticazione è abilitata`,enterTestEmail:`Inserire un indirizzo email di test`,smtpServerAndEmail:`Compilare Server SMTP e Email mittente prima di testare`,usernamePasswordRequired:`Nome utente e password sono obbligatori quando l'autenticazione è abilitata`,configureSmtpFirst:`Configurare e testare le impostazioni SMTP prima`,enableAuthFirst:`Per utilizzare le funzionalità basate sulla posta elettronica, è necessario prima abilitare l'autenticazione.`},success:{settingsSaved:`Impostazioni SMTP salvate con successo`},securityOptions:{starttls:`STARTTLS (Porta 587)`,ssl:`SSL/TLS (Porta 465)`,none:`Nessuna (Porta 25)`},authOptions:{enabled:`Abilitata`,disabled:`Disabilitata`}},appearance:`Aspetto`,notifications:`Notifiche`,smartPlugs:`Prese smart`,spoolman:`Spoolman`,updates:`Aggiornamenti`,language:`Lingua`,languageDescription:`Seleziona la lingua preferita`,theme:`Tema`,themeLight:`Chiaro`,themeDark:`Scuro`,themeSystem:`Sistema`,defaultView:`Vista predefinita`,defaultViewDescription:`Pagina da mostrare all'apertura dell'app`,checkForUpdates:`Controlla aggiornamenti`,autoUpdate:`Aggiornamento automatico`,currentVersion:`Versione attuale`,latestVersion:`Ultima versione`,upToDate:`Sei aggiornato`,updateAvailable:`Aggiornamento disponibile`,notificationLanguage:`Lingua notifiche`,notificationLanguageDescription:`Lingua per notifiche push`,bedCooledThreshold:`Soglia raffreddamento piatto`,bedCooledThresholdDescription:`Temperatura sotto la quale il piatto è considerato raffreddato dopo una stampa`,userNotificationsEnabled:`Notifiche utente`,userNotificationsEnabledDescription:`Abilita il menu notifiche utente e le notifiche e-mail per gli eventi di stampa. Richiede l'autenticazione avanzata.`,userNotificationsDisabledHint:`Abilita l'autenticazione avanzata per usare le notifiche utente.`,notificationProviders:`Provider notifiche`,addProvider:`Aggiungi provider`,editProvider:`Modifica provider`,providerType:`Tipo provider`,testNotification:`Notifica di test`,testSuccess:`Notifica di test inviata`,testFailed:`Invio notifica di test fallito`,quietHours:`Ore silenziose`,quietHoursDescription:`Non disturbare in queste ore`,quietHoursStart:`Inizio`,quietHoursEnd:`Fine`,events:{title:`Eventi notifica`,printStart:`Stampa avviata`,printComplete:`Stampa completata`,printFailed:`Stampa fallita`,printStopped:`Stampa interrotta`,printProgress:`Avanzamento`,printProgressDescription:`Notifica al 25%, 50%, 75%`,printerOffline:`Stampante offline`,printerError:`Errore stampante`,filamentLow:`Filamento in esaurimento`,maintenanceDue:`Manutenzione dovuta`,maintenanceDueDescription:`Notifica quando serve manutenzione`},smartPlug:{title:`Prese smart`,add:`Aggiungi presa smart`,edit:`Modifica presa smart`,name:`Nome`,ipAddress:`Indirizzo IP`,linkedPrinter:`Stampante collegata`,autoOn:`Accensione automatica`,autoOnDescription:`Accendi all'avvio stampa`,autoOff:`Spegnimento automatico`,autoOffDescription:`Spegni dopo il completamento`,offDelay:`Ritardo spegnimento`,offDelayMinutes:`Minuti dopo la stampa`,offDelayTemp:`Quando ugello sotto temperatura`,currentState:`Stato attuale`,turnOn:`Accendi`,turnOff:`Spegni`},filamentTracking:`Tracciamento filamento`,filamentTrackingDesc:`Scegli come tracciare le bobine di filamento. Puoi usare l'inventario integrato o collegare un server Spoolman esterno.`,autoAddUnknownRfid:`Aggiungi automaticamente bobine RFID sconosciute`,autoAddUnknownRfidDesc:`Crea automaticamente una voce di inventario quando viene rilevata una bobina con tag RFID sconosciuto. Disabilita se registri manualmente le nuove bobine in anticipo per evitare duplicati.`,filamentChecks:`Controlli filamento`,disableFilamentWarnings:`Disabilita avvisi filamento`,disableFilamentWarningsDesc:`Non mostrare avvisi per filamento insufficiente durante la stampa o l'accodamento`,preferLowestFilament:`Preferisci il filamento con meno residuo`,preferLowestFilamentDesc:`Quando più bobine corrispondono, usa quella con meno filamento rimanente`,preferLowestFilamentBackupNote:`Ha effetto solo se AMS Filament Backup è abilitato sulla stampante — altrimenti la stampante non può passare a una seconda bobina quando quella scelta finisce.`,trackingModeBuiltIn:`Inventario integrato`,trackingModeBuiltInDesc:`Riconoscimento RFID automatico e tracciamento dell'uso inclusi`,trackingModeSpoolmanDesc:`Server esterno per la gestione del filamento`,builtInFeatureRfid:`Rileva automaticamente le bobine Bambu Lab RFID nell'AMS`,builtInFeatureUsage:`Traccia il consumo di filamento per stampa`,builtInFeatureCatalog:`Gestisci bobine, colori e profili K-factor`,builtInFeatureThirdParty:`Le bobine di terze parti possono essere assegnate alle bobine dell'inventario`,amsSyncButton:`Sincronizza pesi dall'AMS`,amsSyncTitle:`Sincronizza pesi bobine dall'AMS`,amsSyncMessage:`Questo sovrascriverà tutti i pesi delle bobine dell'inventario con i valori attuali di percentuale rimanente dell'AMS dalle stampanti connesse. Usa questa funzione per recuperare dati di peso corrotti. Le stampanti devono essere online.`,amsSyncing:`Sincronizzazione...`,amsSyncSuccess:`{{synced}} bobina/e sincronizzata/e, {{skipped}} saltata/e`,amsSyncError:`Impossibile sincronizzare i pesi dall'AMS`,spoolmanAmsSyncButton:`Sincronizza i pesi Spoolman dall'AMS`,spoolmanAmsSyncTitle:`Sincronizza i pesi delle bobine Spoolman dall'AMS`,spoolmanAmsSyncMessage:`Questo aggiornerà i pesi di tutte le bobine Spoolman in base ai valori di riempimento AMS correnti delle stampanti connesse. Le stampanti devono essere online.`,spoolmanAmsSyncing:`Sincronizzazione...`,spoolmanAmsSyncSuccess:`{{synced}} bobina/e sincronizzata/e, {{skipped}} saltata/e`,spoolmanAmsSyncError:`Impossibile sincronizzare i pesi Spoolman dall'AMS`,spoolmanAmsSyncErrorUnreachable:`Sincronizzazione fallita (Spoolman non raggiungibile)`,spoolmanAmsSyncErrorNotConfigured:`Sincronizzazione fallita (Spoolman non configurato)`,spoolmanNotConfigured:`Spoolman non configurato`,spoolmanFilamentCatalogTitle:`Catalogo filamenti Spoolman`,spoolmanFilamentCatalogDesc:`Nomi dei filamenti e pesi tara dalla tua istanza Spoolman. Nome e peso bobina sono modificabili qui; tutte le altre proprietà sono gestite direttamente in Spoolman.`,spoolmanUrl:`URL Spoolman`,spoolmanUrlHint:`URL del server Spoolman (es. http://localhost:7912)`,spoolmanConnected:`Connesso`,spoolmanDisconnected:`Disconnesso`,status:`Stato`,connect:`Connetti`,disconnect:`Disconnetti`,howSyncWorks:`Come funziona la sincronizzazione`,syncInfoRfidOnly:`Solo le bobine ufficiali Bambu Lab con RFID vengono sincronizzate`,syncInfoAutoCreate:`Le nuove bobine vengono create automaticamente in Spoolman alla prima sincronizzazione`,syncInfoThirdPartySkipped:`Le bobine non Bambu Lab (terze parti, ricaricate) vengono saltate`,linkingExistingSpools:`Collegamento bobine esistenti`,linkingExistingSpoolsDesc:`Per collegare le bobine Spoolman esistenti all'AMS, passa il mouse su uno slot AMS e clicca "Collega a Spoolman".`,syncMode:`Modalità sincronizzazione`,syncModeAuto:`Automatica`,syncModeManual:`Solo manuale`,syncModeAutoDesc:`I dati AMS si sincronizzano automaticamente quando vengono rilevate modifiche`,syncModeManualDesc:`Sincronizzazione solo quando attivata manualmente`,syncAmsData:`Sincronizza dati AMS`,syncAmsDataDesc:`Sincronizza manualmente i dati AMS della stampante su Spoolman`,allPrinters:`Tutte le stampanti`,noDefaultPrinter:`Nessuna predefinita (chiedi ogni volta)`,sidebarOrder:`Ordine barra laterale`,saveThumbnails:`Salva miniature`,captureFinishPhoto:`Acquisisci foto finale`,noPrintersConfigured:`Nessuna stampante configurata`,archiveMode:{always:`Crea sempre voce archivio`,never:`Non creare mai voce archivio`,ask:`Chiedi ogni volta`},checkForUpdatesLabel:`Controlla aggiornamenti`,checkPrinterFirmware:`Controlla firmware stampante`,includeBetaUpdates:`Includi versioni beta`,includeBetaUpdatesDesc:`Notifica versioni beta e prerelease durante il controllo aggiornamenti`,localLogin:{disable:`Disabilita l'accesso locale con nome utente/password`,disableHint:`Quando attivato, solo i provider SSO possono accedere. LDAP non è interessato. Imposta BAMBUDDY_LOCAL_LOGIN=true sul server per mantenere un percorso di ripristino.`},enableRetry:`Abilita retry`,homeAssistantDescription:`Controlla prese smart tramite Home Assistant`,environmentManagedLabel:`(Gestito dall'ambiente)`,autoEnabledViaEnv:`Abilitato automaticamente tramite variabili d'ambiente`,urlFromEnvReadOnly:`Valore impostato dalla variabile d'ambiente HA_URL (sola lettura)`,tokenFromEnvReadOnly:`Valore impostato dalla variabile d'ambiente HA_TOKEN (sola lettura)`,mqttConnectedTo:`Connesso a`,prometheusDescription:`Esponi dati stampante in formato Prometheus`,noSmartPlugsTitle:`Nessuna presa smart configurata`,noSmartPlugsDescription:`Aggiungi una presa smart Tasmota per monitorare energia e automatizzare il controllo.`,noProvidersTitle:`Nessun provider configurato`,noProvidersDescription:`Aggiungi un provider per ricevere avvisi.`,noTemplatesAvailable:`Nessun template disponibile. Riavvia il backend per generare i template predefiniti.`,apiPermissionView:`Visualizza stato stampante e coda`,apiPermissionEdit:`Aggiungi e rimuovi elementi dalla coda di stampa`,apiKeysEmptyTitle:`Nessuna chiave API`,apiKeysEmptyDescription:`Crea una chiave API per integrare servizi esterni.`,noUsersFound:`Nessun utente trovato`,noGroupsFound:`Nessun gruppo trovato`,noGroupsAvailable:`Nessun gruppo disponibile`,passwordsDoNotMatch:`Le password non coincidono`,systemGroupWarning:`I nomi dei gruppi di sistema non possono essere modificati`,authDisabledTitle:`Autenticazione disabilitata`,authDisabledFeature1:`Richiedi accesso per usare il sistema`,authDisabledFeature2:`Crea più utenti con permessi basati sui gruppi`,authDisabledFeature3:`Controlla accesso con 50+ permessi granulari`,userHasCreated:`Questo utente ha creato:`,userItemsQuestion:`Cosa vuoi fare con questi elementi?`,deleteUserConfirm:`Sei sicuro di voler eliminare questo utente?`,actionCannotBeUndone:`Questa azione non può essere annullata.`,addFirstSmartPlug:`Aggiungi la tua prima presa smart`,providers:`Provider`,log:`Registro`,testAll:`Testa tutto`,testResults:`Risultati test`,testPassedCount:`{{count}} riusciti`,testFailedCount:`{{count}} falliti`,messageTemplates:`Template messaggi`,messageTemplatesDescription:`Personalizza i messaggi per ogni evento.`,apiKeys:`Chiavi API`,apiKeysDescription:`Crea chiavi API per integrazioni esterne e webhook.`,createKey:`Crea chiave`,apiKeyCreated:`Chiave API creata con successo`,apiKeyCopyWarning:`Copia questa chiave ora - non verra mostrata di nuovo!`,useInApiBrowser:`Usa nel Browser API`,apiKeyQrButton:`Codice QR`,apiKeyQrTitle:`Scansiona per configurare`,apiKeyQrCaption:`Scansiona con la tua app mobile per aggiungere questo server e la chiave API.`,apiKeyQrWarning:`Contiene la tua chiave API segreta: non condividerla né farne screenshot dove altri possono vederla.`,createNewApiKey:`Crea nuova chiave API`,keyName:`Nome chiave`,keyNamePlaceholder:`es., Home Assistant, OctoPrint`,readStatus:`Leggi stato`,readStatusDescription:`Visualizza stato stampante, coda, libreria, archivi e pipeline dello slicer`,manageQueue:`Gestisci coda`,manageQueueDescription:`Aggiungi e rimuovi elementi dalla coda di stampa. Insieme a "Gestisci libreria", esegui pipeline dello slicer`,controlPrinter:`Controlla stampante`,controlPrinterDescription:`Metti in pausa, riprendi e ferma stampe`,manageLibrary:`Gestisci libreria`,manageLibraryDescription:`Carica, rinomina, elimina ed esegui lo slicing dei file della libreria; importa modelli da MakerWorld. Insieme a "Gestisci coda", esegui pipeline dello slicer`,manageInventory:`Gestisci inventario`,manageInventoryDescription:`Crea, aggiorna ed elimina bobine e voci di inventario. Necessario per i chioschi SpoolBuddy (scansione NFC, letture della bilancia, comandi di sistema del chiosco).`,manageMaintenance:`Gestisci manutenzione`,manageMaintenanceDescription:`Registra le manutenzioni completate, azzera i contatori, modifica gli intervalli e gestisci il catalogo dei tipi di manutenzione. Adatto alle automazioni Home Assistant che registrano "ho pulito l'ugello" senza concedere un controllo più ampio della stampante.`,manageArchives:`Gestisci archivi`,manageArchivesDescription:`Modifica ed elimina gli archivi di stampa, inclusa la rimozione delle vecchie stampe e del loro contributo alle statistiche. Adatto alle automazioni che sfoltiscono la cronologia di stampa.`,manageProjects:`Gestisci progetti`,manageProjectsDescription:`Crea, aggiorna ed elimina progetti e aggiungi archivi ad essi. Adatto alle automazioni che organizzano le stampe in progetti.`,maintenanceBadge:`Manutenzione`,archivesBadge:`Archivi`,projectsBadge:`Progetti`,libraryBadge:`Libreria`,inventoryBadge:`Inventario`,cloudAccess:`Consenti accesso cloud`,cloudAccessDescription:`Legge i preset e i filamenti Bambu Cloud per tuo conto. Richiede l'accesso a Bambu Cloud.`,cloudBadge:`Cloud`,updateEnergyCost:`Aggiorna prezzo elettricità`,updateEnergyCostDescription:`Consenti a questa chiave di inviare in POST un nuovo prezzo elettricità per kWh a /settings/electricity-price. Utile per automazioni Home Assistant a tariffa dinamica (Tibber, Octopus, ecc.). Questo è l'unico campo di impostazioni scrivibile via API key.`,energyCostBadge:`Energia`,legacyKey:`Legacy`,legacyKeyTooltip:`Creato prima della proprietà per utente; ricreare per accesso cloud`,unnamedKey:`Chiave senza nome`,lastUsed:`Ultimo uso`,read:`Lettura`,control:`Controllo`,createFirstKey:`Crea la tua prima chiave`,webhookEndpoints:`Endpoint webhook`,webhookApiKeyHint:`Usa la tua chiave API nell'header X-API-Key.`,webhook:{getAllStatus:`Ottieni stato di tutte le stampanti`,getSpecificStatus:`Ottieni stato di una stampante`,addToQueue:`Aggiungi alla coda di stampa`,pausePrint:`Metti in pausa stampa`,resumePrint:`Riprendi stampa`,stopPrint:`Ferma stampa`},apiBrowser:`Browser API`,apiBrowserDescription:`Esplora e testa tutti gli endpoint API disponibili.`,apiKeyForTesting:`Chiave API per test`,apiKeyPlaceholder:`Incolla qui la tua chiave API per testare gli endpoint autenticati...`,apiKeyHint:`Questa chiave verra inviata come header X-API-Key.`,deleteApiKeyTitle:`Elimina chiave API`,deleteApiKeyMessage:`Sei sicuro di voler eliminare questa chiave API? Le integrazioni che la usano non funzioneranno più.`,deleteKey:`Elimina chiave`,amsDisplayThresholds:`Soglie visualizzazione AMS`,amsThresholdsDescription:`Configura soglie colore per umidità e temperatura AMS.`,humidity:`Umidità`,goodGreen:`Buono (verde)`,fairOrange:`Discreto (arancione)`,aboveFairBad:`Sopra soglia discreta mostra rosso (scarso)`,fairAlsoDryingThreshold:`Questa soglia viene usata anche per attivare l'asciugatura automatica`,fairBelowDryingFloor:`L'asciugatura automatica non può raggiungere questo valore: un AMS segna {{floor}}% o più mentre riscalda, quindi ogni ciclo finirebbe e ripartirebbe subito. Portalo sopra il {{floor}}% se usi l'asciugatura automatica.`,temperature:`Temperatura`,goodBlue:`Buono (blu)`,aboveFairHot:`Sopra soglia discreta mostra rosso (caldo)`,tempAlarmThreshold:`Allarme sopra`,tempAlarmSeparateFromBand:`Solo la soglia di allarme invia notifiche: Buono e Discreto colorano solo la visualizzazione. Lascia vuoto per allarmare alla soglia discreta, come prima.`,tempAlarmMustBePositive:`Una soglia pari o inferiore a 0 viene ignorata: l'allarme usa la soglia discreta.`,historyRetention:`Conservazione cronologia`,keepSensorHistory:`Mantieni cronologia sensori per`,historyRetentionDescription:`I dati più vecchi saranno eliminati automaticamente`,defaultPrintOptions:`Opzioni di stampa predefinite`,defaultPrintOptionsDescription:`Imposta i valori predefiniti per le opzioni di stampa. Possono essere modificati nella finestra di stampa.`,defaultBedLevelling:`Livellamento piatto`,defaultBedLevellingDesc:`Livellamento automatico del piatto prima della stampa`,defaultFlowCali:`Calibrazione flusso`,defaultFlowCaliDesc:`Calibra il flusso di estrusione`,defaultVibrationCali:`Calibrazione vibrazioni`,defaultVibrationCaliDesc:`Riduce gli artefatti di ringing`,defaultLayerInspect:`Ispezione primo strato`,defaultLayerInspectDesc:`Ispezione IA del primo strato`,defaultTimelapse:`Timelapse`,defaultTimelapseDesc:`Registra un video timelapse`,defaultNozzleOffsetCali:`Calibrazione offset ugelli`,defaultNozzleOffsetCaliDesc:`Calibra gli offset tra gli ugelli`,tempFanPresetsTitle:`Preset di temperatura e ventola`,tempFanPresetsDescription:`Personalizza i valori di selezione rapida mostrati nei popover di temperatura e velocità ventola della scheda stampante. Il pulsante Off è sempre visibile.`,tempFanPresetsNozzle:`Temperatura ugello`,tempFanPresetsBed:`Temperatura piano`,tempFanPresetsChamber:`Temperatura camera`,tempFanPresetsFan:`Velocità ventola`,tempFanPresetsReset:`Ripristina valori predefiniti`,concurrentUploadsTitle:`Caricamenti simultanei`,concurrentUploadsDescription:`Quante stampanti possono ricevere file dalla coda contemporaneamente. Le stampanti ricevono i file lentamente (una stampa grande può richiedere diversi minuti) e ognuna aspetta il proprio turno: su un parco macchine ampio, aumentare questo valore evita che l'ultima stampante di un lotto debba attendere la fine di tutti i trasferimenti precedenti. Riducilo se la rete o l'host Bambuddy fatica con i trasferimenti paralleli.`,concurrentUploadsLabel:`Stampanti servite contemporaneamente`,concurrentUploadsHelp:`1 invia a una stampante alla volta (il comportamento precedente). Il valore predefinito è 4.`,staggeredStart:`Avvio scaglionato`,staggeredStartDescription:`Dimensione gruppo e intervallo predefiniti per scaglionare avvii di batch multi-stampante. Sovrascrivibili per batch nella finestra di stampa.`,preheatTitle:`Preriscaldo & Heat Soak`,preheatDescription:`Riscalda il piano (e la camera, se supportata) e mantiene la temperatura prima dell'avvio di ogni stampa in coda. Utile per filamenti tecnici (PA, ABS) su stampanti senza riscaldatore attivo della camera — il piano scalda la camera per irraggiamento mentre il timer di soak scorre. La temperatura target del piano viene letta dal file di stampa; il comportamento della camera dipende dal modello di stampante.`,preheatEnabled:`Abilita preriscaldo & soak`,preheatEnabledDesc:`Se disattivato, le stampe in coda partono subito. Ogni elemento può sovrascrivere per singola stampa.`,preheatFilamentTargetsLabel:`Target camera per filamento (°C)`,preheatFilamentTargetsHint:`Bambuddy sceglie il target più alto tra gli slot AMS caricati. Una stampa i cui slot derivano tutti 0 — PLA, PETG, TPU, PVA — salta del tutto il preriscaldamento e parte subito.`,preheatFilamentTargetsReset:`Ripristina valori predefiniti`,preheatFilamentTargetsDefaultRow:`Altro / non mappato`,preheatMaxWait:`Attesa max (secondi)`,preheatMaxWaitHelp:`Limite della fase di riscaldamento camera prima del passaggio al soak.`,preheatSoak:`Soak (secondi)`,preheatSoakHelp:`Tenuta dopo il raggiungimento del target o lo scadere dell'attesa max.`,preheatHardwareTitle:`Comportamento per stampante:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E riscaldano attivamente la camera con M141. X1C/P2S leggono la temperatura ma scaldano la camera solo per irraggiamento dal piano. P1S/P1P/A1/A1 Mini non hanno sensore di camera — vale solo il timer di soak.`,preheatPerItemDesc:`Riscalda il piano e la camera prima dell'avvio di questa stampa. Per impostazione predefinita usa l'interruttore globale in Impostazioni → Workflow.`,preheatOverride_inherit:`Eredita`,preheatOverride_on:`Attivo`,preheatOverride_off:`Spento`,calibrationMode_off:`Spento`,calibrationMode_on:`Attivo`,calibrationMode_auto:`Auto`,preheatTargetOverride:`Sovrascrivi target camera (°C, vuoto = per filamento)`,preheatTargetOverrideHelp:`0 riscalda il piano ed esegue il mantenimento senza camera. Se lasciato vuoto, una stampa che non richiede la camera salta del tutto il preriscaldamento.`,plateClear:`Conferma piatto libero`,requirePlateClear:`Richiedi conferma piatto libero`,requirePlateClearDescription:`Quando questa opzione è abilitata, lo scheduler attende una conferma per stampante che il piatto sia libero prima di avviare le stampe in coda su stampanti con lavori completati. Disabilitandola vengono nascosti anche il badge di stato del piatto e il pulsante "Segna il piatto come liberato" sulle schede stampante.`,keepBedWarm:`Mantieni il piano caldo tra le stampe`,keepBedWarmDesc:`In attesa della conferma di piatto liberato, mantiene il piano alla temperatura di mantenimento indicata sotto così la camera resta calda — o alla temperatura del piano della stampa successiva se è più alta. Si applica solo quando la stampa successiva richiede il riscaldamento della camera (ASA, ABS, PA, PC, ecc.). Richiede la conferma di piatto liberato abilitata.`,keepWarmBedTemp:`Temperatura del piano in mantenimento (°C)`,keepWarmBedTempHelp:`Usato quando il piano serve a riscaldare la camera: durante il mantenimento in caldo e nel preriscaldamento se il file di stampa non contiene una temperatura del piano. Una temperatura più alta indicata dal file ha sempre la precedenza.`,keepWarmMaxMinutes:`Interrompi il mantenimento in caldo dopo (minuti)`,keepWarmMaxMinutesHelp:`Se il piatto non viene liberato entro questo tempo, i riscaldatori vengono spenti invece di restare accesi indefinitamente.`,gcodeInjection:`Iniezione G-code`,gcodeInjectionDescription:`Configura G-code personalizzato da iniettare all'inizio e/o alla fine delle stampe per sistemi di stampa automatica come Farmloop, SwapMod, AutoClear e Printflow 3D. Gli snippet sono configurati per modello di stampante e applicati quando "Inietta G-code" è abilitato su un elemento della coda.`,gcodeInjectionNoPrinters:`Nessuna stampante trovata. Aggiungi stampanti per configurare gli snippet G-code.`,gcodeStartLabel:`G-code iniziale`,gcodeEndLabel:`G-code finale`,gcodeStartPlaceholder:`G-code inserito prima dell'inizio della stampa...`,gcodeEndPlaceholder:`G-code aggiunto dopo la fine della stampa...`,staggerGroupSize:`Dimensione gruppo`,staggerGroupSizeHelp:`Stampanti da avviare simultaneamente per gruppo`,staggerInterval:`Intervallo (minuti)`,staggerIntervalHelp:`Ritardo tra l'avvio di ogni gruppo`,queueDrying:`Asciugatura automatica`,queueDryingDescription:`Asciugare automaticamente il filamento AMS quando la stampante è inattiva tra le stampe in coda. Usa la soglia di umidità sopra.`,queueDryingEnabled:`Abilita asciugatura automatica`,queueDryingEnabledDescription:`Avvia l'asciugatura AMS automaticamente quando la stampante è inattiva e l'umidità supera la soglia`,queueDryingBlock:`Attendi completamento asciugatura`,queueDryingBlockDescription:`Blocca la coda di stampa fino al completamento dell'asciugatura. Se disattivato, le stampe hanno priorità.`,ambientDryingEnabled:`Asciugatura ambientale`,ambientDryingEnabledDescription:`Asciuga automaticamente il filamento sulle stampanti inattive quando l'umidità supera la soglia, anche senza stampe in coda.`,printDryingEnabled:`Asciugatura durante la stampa`,printDryingEnabledDescription:`Consente all'asciugatura automatica di continuare durante una stampa su hardware supportato (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L con firmware recente). La temperatura di asciugatura viene automaticamente limitata a 5°C sotto il preset di riposo per proteggere le bobine.`,dryingPresets:`Preset di asciugatura`,dryingPresetsDescription:`Temperatura e durata per tipo di filamento. AMS 2 Pro usa temperature più basse, AMS-HT supporta temperature più alte.`,dryingFilament:`Filamento`,humidityThresholds:`Soglie di umidità`,humidityThresholdsDescription:`Soglia di umidità per tipo di filamento per asciugatura automatica e allarmi. Carichi misti in un AMS usano la soglia più bassa.`,humidityThresholdCol:`Soglia`,humidityThresholdDefault:`Predefinito (tipi sconosciuti)`,printModal:`Modale stampa`,expandCustomMapping:`Espandi mapping personalizzato di default`,expandCustomMappingDescription:`Quando stampi su più stampanti, mostra mapping AMS per stampante espanso`,authentication:`Autenticazione`,authEnabledDescription:`La tua istanza è protetta con autenticazione`,authDisabledDescription:`Abilita per richiedere accesso e gestire utenti`,authDisabledMessage:`Abilita autenticazione per creare account, gestire permessi e proteggere la tua istanza Bambuddy.`,enableAuthentication:`Abilita autenticazione`,currentUser:`Utente corrente`,changePassword:`Cambia password`,admin:`Amministratore`,users:`Utenti`,addUser:`Aggiungi utente`,groups:`Gruppi`,addGroup:`Aggiungi gruppo`,system:`Sistema`,noDescription:`Nessuna descrizione`,userCount:`{{count}} utenti`,permissionCount:`{{count}} permessi`,createUser:`Crea utente`,username:`Nome utente`,enterUsername:`Inserisci nome utente`,password:`Password`,enterPassword:`Inserisci password`,passwordRequirements:`Almeno 8 caratteri, con una maiuscola, una minuscola, una cifra e un carattere speciale.`,confirmPassword:`Conferma password`,confirmPasswordPlaceholder:`Conferma password`,viewReleaseOnGitHub:`Vedi release su GitHub`,turnAllPlugsOn:`Accendi tutte le prese`,turnAllPlugsOff:`Spegni tutte le prese`,clearNotificationLogs:`Cancella log notifiche`,clearLogsMessage:`Questo eliminerà definitivamente tutti i log notifiche più vecchi di 30 giorni. Questa azione non può essere annullata.`,clearLogs:`Cancella log`,resetUiPreferences:`Reimposta preferenze UI`,resetUiPreferencesMessage:`Questo reimposterà le preferenze UI ai valori predefiniti: ordine barra laterale, tema, layout dashboard, modalità vista e preferenze ordinamento. Stampanti, archivi e impostazioni server NON saranno modificati. La pagina si ricaricherà dopo la cancellazione.`,resetPreferences:`Reimposta preferenze`,deleteGroupTitle:`Elimina gruppo`,deleteGroupMessage:`Sei sicuro di voler eliminare questo gruppo? Gli utenti in questo gruppo perderanno questi permessi.`,deleteGroup:`Elimina gruppo`,disableAuthenticationTitle:`Disabilita autenticazione`,disableAuthenticationMessage:`Sei sicuro di voler disabilitare l'autenticazione? Questo renderà la tua istanza Bambuddy accessibile senza login. Tutti gli utenti resteranno nel database ma l'autenticazione sarà disabilitata.`,disableAuthentication:`Disabilita autenticazione`,configureBambuddy:`Configura Bambuddy`,systemDefault:`Predefinito di sistema`,archiveSettings:`Impostazioni archivio`,newWindow:`Nuova finestra`,embeddedOverlay:`Overlay incorporato`,preferredSlicer:`Slicer preferito`,preferredSlicerDescription:`Slicer utilizzato per lo slicing in-app tramite il sidecar API`,openInSlicerLabel:`Apri nello slicer`,openInSlicerInherit:`Come slicer API`,openInSlicerDescription:`Slicer desktop utilizzato dal pulsante 'Apri nello slicer'. Lascia su 'Come slicer API' per ereditare, o scegli uno slicer diverso per l'uso locale.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev hanno bug CLI noti che bloccano lo slicing di molti 3MF creati da Bambu — vedi le issue upstream #12426 (segfault su file multi-estrusore dipinti) e #13386 (rifiuto della validazione rigorosa dei range di parametri). Bambu Studio è raccomandato finché non arrivano le correzioni upstream.`,useSlicerApi:`Usa Slicer API`,useSlicerApiDescription:`Se attivo, le azioni "Slice" aprono il modale slicer integrato e chiamano il sidecar slicer-API. Se disattivo (predefinito), inoltrano al slicer desktop tramite schema URI.`,slicerCard:`Slicer`,orcaslicerApiUrl:`OrcaSlicer sidecar URL`,bambuStudioApiUrl:`Bambu Studio sidecar URL`,slicerStallTimeout:`Timeout di inattivita dello slicer (minuti)`,slicerStallTimeoutDescription:`Interrompe uno slice dopo questo tempo senza progressi dal sidecar. I modelli pesanti che continuano a segnalare progressi non vengono mai interrotti, per quanto tempo richiedano. I sidecar che non segnalano progressi usano questo valore come limite di tempo totale.`,slicerApiUrlDescription:`URL del container sidecar slicer-API. Lascia vuoto per usare le variabili d'ambiente SLICER_API_URL / BAMBU_STUDIO_API_URL.`,externalCameras:`Camere esterne`,costTracking:`Tracciamento costi`,printsOnly:`Solo stampe`,totalConsumption:`Consumo totale`,dataManagement:`Gestione dati`,storageUsage:`Memoria utilizzata`,storageUsageDescription:`Ripartizione della memoria per categoria`,storageUsageTotal:`Totale`,storageUsageErrors:`Errori`,storageUsageOtherBreakdown:`Altro (include risorse statiche, script e file di configurazione)`,storageUsageSystem:`Sistema`,storageUsageData:`Dati`,storageUsageUnavailable:`Informazioni sull'utilizzo della memoria non disponibili`,clearNotificationLogsDescription:`Elimina log notifiche più vecchi di 30 giorni`,resetUiPreferencesDescription:`Reimposta ordine barra laterale, tema, modalità vista e preferenze layout. Stampanti, archivi e impostazioni non vengono modificati.`,enableHomeAssistant:`Abilita Home Assistant`,enableMqtt:`Abilita MQTT`,useTls:`Usa TLS`,enableMetricsEndpoint:`Abilita endpoint metriche`,availableMetrics:`Metriche disponibili`,billingEnabled:`Abilita fatturazione`,billingEnabledDescription:`Addebita agli utenti le stampe e abilita le funzioni finanziarie`,printerKillSwitch:`Arresto automatico della stampa`,printerKillSwitchDescription:`Interrompi immediatamente le stampe non autorizzate`,financeBudgetReset:`Azzeramento mensile del budget finanziario`,financeBudgetResetDay:`Giorno di azzeramento`,financeBudgetResetDayHelp:`Per i mesi brevi, l'azzeramento utilizza l'ultimo giorno del mese.`,financeBudgetResetTimezone:`Fuso orario di azzeramento`,financeBudgetResetTimezoneHelp:`L'inizio della finestra di bilancio viene calcolato in questo fuso orario.`,rebuildLedger:`Ricostruisci il ledger del portafoglio`,rebuildLedgerStarted:`Ricostruzione del ledger avviata`,rebuildLedgerConfirmTitle:`Ricostruire il ledger del portafoglio?`,rebuildLedgerConfirmMessage:`Questo ricostruirà il ledger del portafoglio per riparare i valori di saldo storici. Eseguire solo se sai cosa stai facendo.`,rebuildLedgerInProgress:`Avvio della ricostruzione...`,editUser:`Modifica utente`,deleteUserTitle:`Elimina utente`,groupName:`Nome gruppo`,leaveEmptyForAnonymous:`Lascia vuoto per anonimo`,leaveEmptyForNoAuth:`Lascia vuoto per nessuna autenticazione`,enterNewPassword:`Inserisci nuova password`,confirmNewPassword:`Conferma nuova password`,enterGroupName:`Inserisci nome gruppo`,enterDescriptionOptional:`Inserisci descrizione (opzionale)`,enterCurrentPassword:`Inserisci password attuale`,enterNewPasswordMin6:`Inserisci nuova password (min 6 caratteri)`,toast:{keyCopied:`Chiave copiata negli appunti`,copyFailed:`Copia chiave fallita`,keyAddedToBrowser:`Chiave aggiunta al Browser API`,clearLogsFailed:`Eliminazione log fallita`,uiPreferencesReset:`Preferenze UI reimpostate. Aggiornamento...`,authDisabled:`Autenticazione disabilitata con successo`,authDisableFailed:`Disabilitazione autenticazione fallita`,apiKeyCreated:`Chiave API creata`,apiKeyDeleted:`Chiave API eliminata`,userCreated:`Utente creato con successo`,userUpdated:`Utente aggiornato con successo`,userDeleted:`Utente eliminato con successo`,groupCreated:`Gruppo creato con successo`,groupUpdated:`Gruppo aggiornato con successo`,groupDeleted:`Gruppo eliminato con successo`,fillRequiredFields:`Compila tutti i campi obbligatori`,passwordsDoNotMatch:`Le password non coincidono`,passwordTooShort:`La password deve essere di almeno 8 caratteri`,passwordNeedsUppercase:`La password deve contenere almeno una lettera maiuscola`,passwordNeedsLowercase:`La password deve contenere almeno una lettera minuscola`,passwordNeedsDigit:`La password deve contenere almeno una cifra`,passwordNeedsSpecial:`La password deve contenere almeno un carattere speciale`,enterGroupName:`Inserisci un nome gruppo`,settingsSaved:`Impostazioni salvate`,noPermissionUpdate:`Non hai il permesso di modificare le impostazioni`,cameraSettingsSaved:`Impostazioni camera salvate`,enterCameraUrl:`Inserisci un URL camera`,passwordChanged:`Password cambiata con successo`,connectionFailed:`Connessione fallita`,testFailed:`Test fallito`,cameraConnected:`Camera connessa{{resolution}}`,cameraConnectedCoalesced:`Camera connessa{{resolution}} (condivisa con un'acquisizione già in corso)`},testConnection:`Testa connessione`,catalog:{spoolCatalog:`Catalogo bobine`,spoolCatalogDescription:`Pesi delle bobine vuote per marca/tipo. Utilizzato per la ricerca automatica del peso quando si aggiungono bobine.`,searchCatalog:`Cerca nel catalogo...`,addNewEntry:`Aggiungi nuova voce`,namePlaceholder:`Nome (es. Bambu Lab - Plastica)`,weight:`Peso`,type:`Tipo`,default:`Predefinito`,custom:`Personalizzato`,noMatch:`Nessuna voce corrisponde alla ricerca`,empty:`Nessuna voce nel catalogo`,deleteEntry:`Elimina voce`,deleteConfirm:`Sei sicuro di voler eliminare "{{name}}"?`,resetCatalog:`Ripristina catalogo`,resetConfirm:`Ripristinare il catalogo ai valori predefiniti? Tutte le voci personalizzate verranno rimosse.`,loadFailed:`Impossibile caricare il catalogo bobine`,nameWeightRequired:`Nome e peso sono obbligatori`,entryAdded:`Voce aggiunta`,addFailed:`Impossibile aggiungere la voce`,entryUpdated:`Voce aggiornata`,updateFailed:`Impossibile aggiornare la voce`,entryDeleted:`Voce eliminata`,deleteFailed:`Impossibile eliminare la voce`,resetSuccess:`Catalogo ripristinato ai valori predefiniti`,resetFailed:`Impossibile ripristinare il catalogo`,exported:`{{count}} voci esportate`,imported:`{{added}} voci importate ({{skipped}} saltate)`,importFailed:`Impossibile importare: formato JSON non valido`,exportTooltip:`Esporta catalogo in JSON`,importTooltip:`Importa catalogo da JSON`,resetTooltip:`Ripristina valori predefiniti`,selectedCount:`{{count}} selezionati`,deleteSelected:`Elimina selezionati`,bulkDeleteConfirm:`Eliminare {{count}} voci?`,bulkDeleted:`{{count}} voci eliminate`,bulkDeleteFailed:`Impossibile eliminare le voci`,material:`Materiale`,spoolWeight:`Peso bobina`,color:`Colore`,updateSpoolWeight:`Aggiorna peso bobina`,filamentUpdated:`Filamento aggiornato`,filamentUpdateFailed:`Aggiornamento filamento non riuscito`,filamentUpdateInvalid:`Dati filamento non validi`,keepExistingSpoolWeight:`Mantieni vecchio peso per le bobine esistenti`,keepExistingSpoolWeightDesc:`Le bobine già create con questo tipo di filamento mantengono il vecchio peso tara. Le nuove bobine usano il valore aggiornato.`,applyToAllSpools:`Applica a tutte le bobine`,applyToAllSpoolsDesc:`Tutti i calcoli del peso per questo tipo di filamento usano immediatamente il nuovo peso tara.`},colorCatalog:{title:`Catalogo colori`,description:`Colori del filamento per produttore/materiale. Utilizzato per la ricerca automatica del colore quando si aggiungono bobine.`,searchColors:`Cerca colori...`,allManufacturers:`Tutti i produttori`,addNewColor:`Aggiungi nuovo colore`,manufacturer:`Produttore`,colorName:`Nome colore`,hex:`Hex`,materialOptional:`Materiale (opzionale)`,showing:`Visualizzazione di {{filtered}} su {{total}} colori`,noMatch:`Nessun colore corrisponde alla ricerca`,empty:`Nessun colore nel catalogo`,deleteColor:`Elimina colore`,deleteConfirm:`Sei sicuro di voler eliminare "{{name}}"?`,resetCatalog:`Ripristina catalogo colori`,resetConfirm:`Ripristinare il catalogo ai valori predefiniti? Tutti i colori personalizzati verranno rimossi.`,sync:`Sincronizza`,starting:`Avvio...`,syncTooltip:`Sincronizza da FilamentColors.xyz (2000+ colori, potrebbe richiedere un minuto)`,loadFailed:`Impossibile caricare il catalogo colori`,fieldsRequired:`Produttore, nome colore e colore hex sono obbligatori`,colorAdded:`Colore aggiunto`,addFailed:`Impossibile aggiungere il colore`,colorUpdated:`Colore aggiornato`,updateFailed:`Impossibile aggiornare il colore`,colorDeleted:`Colore eliminato`,deleteFailed:`Impossibile eliminare il colore`,resetSuccess:`Catalogo colori ripristinato ai valori predefiniti`,resetFailed:`Impossibile ripristinare il catalogo`,syncUpToDate:`Già aggiornato ({{count}} colori verificati)`,syncComplete:`{{added}} nuovi colori aggiunti ({{skipped}} già esistenti)`,syncError:`Errore di sincronizzazione`,syncFailed:`Impossibile sincronizzare da FilamentColors.xyz`,exported:`{{count}} colori esportati`,imported:`{{added}} colori importati ({{skipped}} saltati)`,importFailed:`Impossibile importare: formato JSON non valido`,selectedCount:`{{count}} selezionati`,deleteSelected:`Elimina selezionati`,bulkDeleteConfirm:`Eliminare {{count}} colori?`,bulkDeleted:`{{count}} colori eliminati`,bulkDeleteFailed:`Impossibile eliminare i colori`},dateFormat:`Formato data`,dateFormatUs:`US (MM/GG/AAAA)`,dateFormatEu:`EU (GG/MM/AAAA)`,dateFormatIso:`ISO (AAAA-MM-GG)`,timeFormat:`Formato ora`,timeFormat12:`12 ore (3:30 PM)`,timeFormat24:`24 ore (15:30)`,defaultPrinter:`Stampante predefinita`,defaultPrinterDescription:`Preseleziona questa stampante per upload, ristampe e altre operazioni.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Usa il layout della barra laterale per riordinare gli elementi, ripristinare la visibilità e gestire i link personalizzati.`,setDefault:`Imposta predefinito`,sidebarOrderSetDefaultHint:`Imposta predefinito applica l'ordine attuale del menu agli utenti che non hanno ancora personalizzato il proprio.`,sidebarDefaultSet:`L'ordine predefinito del menu è stato impostato.`,sidebarDefaultCleared:`Ordine predefinito del menu cancellato.`,sidebarDefaultFailed:`Impossibile impostare l'ordine predefinito del menu.`,reset:`Ripristina`,darkMode:`Modalità scura`,lightMode:`Modalità chiara`,active:`(attivo)`,background:`Sfondo`,accent:`Accento`,style:`Stile`,bgNeutral:`Neutro`,bgWarm:`Caldo`,bgCool:`Freddo`,bgOled:`OLED Nero`,bgSlate:`Blu ardesia`,bgForest:`Verde foresta`,accentGreen:`Verde`,accentTeal:`Verde acqua`,accentBlue:`Blu`,accentOrange:`Arancione`,accentPurple:`Viola`,accentRed:`Rosso`,styleClassic:`Classico`,styleGlow:`Luminoso`,styleVibrant:`Vibrante`,themeToggleHint:`Passa tra modalità scura, chiara e sistema con l'icona nella barra laterale.`,progressInTitle:`Avanzamento nella scheda`,progressInTitleDescription:`Mostra la percentuale della stampa attiva e un anello di avanzamento nella scheda del browser.`,autoArchivePrints:`Archiviazione automatica stampe`,autoArchiveDescription:`Salva automaticamente i file 3MF al completamento delle stampe`,saveThumbnailsDescription:`Estrai e salva le immagini di anteprima dai file 3MF`,captureFinishPhotoDescription:`Scatta una foto dalla fotocamera della stampante al completamento della stampa. Bambuddy registra un breve timelapse durante la stampa in modo che la foto possa essere ricavata dal momento precedente all'abbassamento del piatto; il file del timelapse viene mantenuto se hai abilitato il timelapse per questa stampa, altrimenti viene eliminato automaticamente dopo l'acquisizione della foto.`,finishPhotoRestorePlate:`Solleva il piatto per la foto finale`,finishPhotoRestorePlateDescription:`La stampante abbassa il piatto di circa 100 mm al termine di una stampa, lasciando l'oggetto finito sotto l'inquadratura della fotocamera. Bambuddy lo risolleva fino a poco sopra l'ultimo strato stampato, scatta la foto e poi lo riabbassa. Ignorato se l'altezza di stampa è sconosciuta o se un altro lavoro è in coda.`,ffmpegNotInstalled:`ffmpeg non installato`,ffmpegRequired:`L'acquisizione dalla fotocamera richiede ffmpeg. Installalo tramite <brew>brew install ffmpeg</brew> (macOS) o <apt>apt install ffmpeg</apt> (Linux).`,camera:`Fotocamera`,cameraViewMode:`Modalità visualizzazione fotocamera`,cameraOverlayDescription:`La fotocamera si apre in un overlay ridimensionabile sulla schermata principale`,cameraWindowDescription:`La fotocamera si apre in una finestra separata del browser`,externalCamerasDescription:`Configura fotocamere esterne per sostituire la fotocamera integrata della stampante. Supporta stream MJPEG, RTSP, snapshot HTTP e fotocamere USB (V4L2). Quando abilitata, la fotocamera esterna viene usata per la vista in diretta e le foto di completamento.`,cameraPlaceholderUsb:`Percorso dispositivo (/dev/video0)`,cameraPlaceholderUrl:`URL fotocamera (rtsp://... o http://...)`,cameraTypeMjpeg:`Stream MJPEG`,cameraTypeRtsp:`Stream RTSP`,cameraTypeSnapshot:`Snapshot HTTP`,cameraTypeUsb:`Fotocamera USB (V4L2)`,cameraSnapshotUrl:`URL istantanea (facoltativo)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`URL singolo frame usato per miniature di notifica, foto di fine, frame del layer timelapse e rilevamento del piano. Timelapse e rilevamento del piano richiedono ciascuno il proprio toggle per stampante — questo URL è solo la sorgente immagine che usano quando attivi. Lascia vuoto per acquisire dallo stream live sopra. Utile per go2rtc (/api/frame.jpeg) e telecamere IP con endpoint snapshot dedicato.`,cameraRotation:`Rotazione`,test:`Test`,connected:`Connesso`,disconnected:`Disconnesso`,currency:`Valuta`,defaultFilamentCost:`Costo filamento predefinito (per kg)`,electricityCost:`Costo elettricità per kWh`,energyDisplayMode:`Modalità visualizzazione energia`,energyModePrintDescription:`La dashboard mostra la somma dell'energia usata durante le stampe`,energyModeTotalDescription:`La dashboard mostra l'energia totale dalle prese smart`,fileManager:`Gestore file`,createArchiveEntry:`Crea voce archivio durante la stampa`,createArchiveEntryDescription:`Quando si stampa dal gestore file, crea opzionalmente una voce di archivio`,lowDiskSpaceWarning:`Avviso spazio disco insufficiente`,lowDiskSpaceDescription:`Mostra avviso quando lo spazio disco scende sotto questa soglia`,printerFirmware:`Firmware stampante`,checkFirmwareDescription:`Controlla aggiornamenti firmware da Bambu Lab`,bambuddySoftware:`Software Bambuddy`,autoCheckDescription:`Controlla automaticamente nuove versioni all'avvio`,checkNow:`Controlla ora`,updateAvailableVersion:`Aggiornamento disponibile: v{{version}}`,releaseNotes:`Note di rilascio`,updateViaDocker:`Aggiorna tramite Docker Compose:`,composeDirectory:`Cartella Compose`,composeDirectoryHint:`Cartella che contiene il tuo docker-compose.yml. Lascia vuoto per omettere il cd.`,copyUpdateCommand:`Copia comando di aggiornamento`,updateViaHomeAssistant:`Gli aggiornamenti sono gestiti dal Supervisor di Home Assistant. Apri Impostazioni → Add-on → Bambuddy in Home Assistant per installare la nuova versione.`,updateViaWindowsInstaller:`Le installazioni Windows si aggiornano rieseguendo l'installer. Scarica la nuova versione qui sotto — i tuoi dati, le impostazioni e le stampanti vengono mantenuti.`,downloadWindowsInstaller:`Scarica installer per v{{version}}`,installUpdate:`Installa aggiornamento`,latestVersionRunning:`Stai usando l'ultima versione`,failedToCheckUpdates:`Controllo aggiornamenti fallito: {{error}}`,backupRestore:`Backup e ripristino`,backupRestoreDescription:`Esporta/importa impostazioni e configura backup GitHub`,goToBackup:`Vai al backup`,externalUrl:`URL esterno`,externalUrlDescription:`L'URL esterno dove Bambuddy è accessibile. Usato per immagini di notifica e integrazioni esterne.`,bambuddyUrl:`URL Bambuddy`,externalUrlHint:`Includi protocollo e porta (es. http://192.168.1.100:8000)`,ftpRetry:`Riprova FTP`,ftpRetryDescription:`Riprova le operazioni FTP quando il WiFi della stampante è instabile. Si applica a download 3MF, upload stampe, download timelapse e aggiornamenti firmware.`,autoRetryDescription:`Riprova automaticamente le operazioni FTP fallite`,retryAttempts:`Tentativi di ripetizione`,retryDelay:`Ritardo ripetizione`,connectionTimeout:`Timeout connessione`,time_one:`{{count}} volta`,time_other:`{{count}} volte`,second_one:`{{count}} secondo`,second_other:`{{count}} secondi`,nSeconds:`{{count}} secondi`,increaseForWeakWifi:`Aumenta per stampanti con WiFi debole`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Connetti a Home Assistant per controllare le prese smart tramite l'API REST HA. Supporta entità switch, light, input_boolean e script.`,homeAssistantUrl:`URL Home Assistant`,longLivedAccessToken:`Token di accesso a lunga durata`,haTokenHint:`Crea un token in HA: Profilo → Token di accesso a lunga durata → Crea token`,connectionSuccessful:`Connessione riuscita`,connectionFailed:`Connessione fallita`,haConnectionSuccess:`Connesso con successo a Home Assistant.`,haConnectionFailed:`Connessione a Home Assistant fallita.`,mqttPublishing:`Pubblicazione MQTT`,mqttDescription:`Pubblica eventi BamBuddy su un broker MQTT esterno per l'integrazione con Node-RED, Home Assistant e altri sistemi di automazione.`,mqttEnableDescription:`Pubblica eventi su broker MQTT esterno`,brokerHostname:`Hostname broker`,port:`Porta`,usernameOptional:`Nome utente (opzionale)`,passwordOptional:`Password (opzionale)`,topicPrefix:`Prefisso topic`,topicPrefixHint:`I topic saranno: {{prefix}}/printers/<serial>/status, ecc.`,prometheusMetrics:`Metriche Prometheus`,prometheusEndpointDescription:`Esponi metriche stampante su <code>/api/v1/metrics</code> per monitoraggio Prometheus/Grafana.`,bearerTokenOptional:`Token Bearer (opzionale)`,bearerTokenHint:`Se impostato, le richieste devono includere <code>Authorization: Bearer <token></code>`,metricsConnectionStatus:`Stato connessione`,metricsPrinterState:`Stato stampante (idle/printing/ecc)`,metricsPrintProgress:`Progresso stampa 0-100%`,metricsBedTemp:`Temperatura piatto`,metricsNozzleTemp:`Temperatura ugello`,metricsPrintsTotal:`Stampe totali per risultato`,metricsMore:`...e altro (strati, ventole, coda, consumo filamento)`,smartPlugsDescription:`Connetti prese smart (Tasmota o Home Assistant) per automatizzare il controllo dell'alimentazione e monitorare il consumo energetico delle stampanti.`,allOn:`Tutte accese`,allOff:`Tutte spente`,addSmartPlug:`Aggiungi presa smart`,energySummary:`Riepilogo energia`,currentPower:`Potenza attuale`,plugsOnline:`{{reachable}}/{{total}} prese online`,today:`Oggi`,yesterday:`Ieri`,total:`Totale`,enablePlugsForSummary:`Abilita le prese per vedere il riepilogo energia`,addNotificationProvider:`Aggiungi`,systemBadge:`(Sistema)`,creating:`Creazione...`,changing:`Modifica...`,deleteUserAndItems:`Elimina utente E i suoi elementi`,deleteUserKeepItems:`Elimina utente, mantieni elementi (diventeranno senza proprietario)`,ok:`OK`,twoFa:{totpTitle:`App Authenticator (TOTP)`,totpDesc:`Usa un'app come Google Authenticator, Aegis o Authy.`,emailOtpTitle:`OTP via e-mail`,emailOtpDesc:`Invia un codice monouso a {{email}} al momento del login.`,emailOtpNoEmail:`Aggiungi un indirizzo e-mail al tuo account per abilitare questo metodo.`,addEmailFirst:`Il tuo account non ha un indirizzo e-mail. Chiedi a un amministratore di aggiungerne uno.`,setupTotp:`Configura app Authenticator`,setupAuthApp:`Configura app Authenticator`,setupInstructions:`Scansiona il codice QR con la tua app authenticator, poi conferma con un codice.`,manualEntry:`Impossibile scansionare? Inserisci questo segreto manualmente:`,scannedContinue:`Codice scansionato — continua`,enterCodeToConfirm:`Inserisci il codice a 6 cifre dalla tua app authenticator per confermare.`,activate:`Attiva`,disableTotp:`Disabilita Authenticator`,disableConfirmHint:`Inserisci un codice TOTP valido o un codice di backup per disabilitare l'authenticator.`,totpDisabled:`App Authenticator disabilitata.`,emailOtpEnabled:`OTP via e-mail abilitato.`,emailOtpDisabled:`OTP via e-mail disabilitato.`,smtpRequired:`Configura e testa prima le impostazioni SMTP.`,invalidCode:`Codice non valido. Riprova.`,enableEmailOtp:`Abilita OTP via e-mail`,disableEmailOtp:`Disabilita OTP via e-mail`,emailSetupEnterCode:`È stato inviato un codice di verifica al tuo indirizzo e-mail. Inseriscilo qui sotto per confermare che possiedi questa casella di posta.`,verifyAndEnable:`Verifica e abilita`,emailDisablePasswordHint:`Inserisci la password del tuo account per confermare la disabilitazione dell'OTP via e-mail.`,passwordPlaceholder:`Inserisci la tua password`,backupCodesTitle:`Salva i tuoi codici di backup`,backupCodesWarning:`Conserva questi codici in un posto sicuro. Ogni codice può essere usato una sola volta.`,backupCodesRemaining:`{{count}} codici di backup rimanenti`,savedCodes:`Codici salvati`,regenBackup:`Rigenera codici di backup`,regenBackupHint:`Inserisci il tuo codice TOTP corrente per generare 10 nuovi codici di backup.`,newBackupCodes:`Nuovi codici di backup`,linkedAccounts:`Account SSO collegati`,linkedAccountsDesc:`Questi provider di identità esterni sono collegati al tuo account.`,oidcUnlinked:`Account scollegato.`},sessionPolicy:{title:`Criterio di sessione`,description:`Durata massima della sessione per i nuovi accessi utente. I token già emessi mantengono la scadenza originale.`,preset24h:`24 ore`,preset7d:`7 giorni`,preset30d:`30 giorni`,customHoursLabel:`Durata personalizzata della sessione in ore`,hoursSuffix:`ore`,warning:`Le sessioni più lunghe riducono la protezione di disconnessione automatica. Consigliato solo per installazioni mono-utente attendibili.`},oidc:{title:`Provider SSO / OIDC`,desc:`Configura provider OpenID Connect per il single sign-on.`,addProvider:`Aggiungi provider`,newProvider:`Nuovo provider`,empty:`Nessun provider OIDC configurato.`,created:`Provider creato.`,updated:`Provider aggiornato.`,deleted:`Provider eliminato.`,refreshIcon:`Aggiorna icona`,removeIcon:`Rimuovi icona`,iconRefreshed:`Icona aggiornata.`,iconRemoved:`Icona rimossa.`,iconFetchFailed:`Impossibile recuperare l'icona dall'URL del provider.`,deleteTitle:`Elimina provider`,deleteMessage:`Eliminare "{{name}}"? Tutti gli account collegati verranno disconnessi.`,form:{name:`Nome visualizzato`,issuerUrl:`URL emittente`,clientId:`ID client`,clientSecret:`Client secret`,scopes:`Scope`,iconUrl:`URL icona (opzionale)`,enabled:`Abilitato`,autoCreate:`Crea utenti automaticamente`,autoCreateDesc:`Crea automaticamente un account locale al primo accesso.`,autoLink:`Collega automaticamente gli account esistenti`,autoLinkDesc:`Collega gli account locali esistenti tramite email al primo accesso.`,secretHint:`lascia vuoto per mantenere`,secretPlaceholder:`nuovo segreto`,emailClaim:`Claim email`,emailClaimDesc:`Claim JWT usato come identità email. Usare 'preferred_username' o 'upn' per Azure Entra ID (che non invia email_verified). Usare solo nomi di claim affidabili.`,emailClaimPlaceholder:`e-mail`,emailClaimCustomClaimAutoLinkWarning:`I claim personalizzati sono sicuri per il collegamento automatico solo se il valore è gestito dal tenant (es. Azure Entra ID upn / preferred_username). Non abilitare il collegamento automatico se il tuo IdP consente agli utenti di auto-assegnare questo claim.`,requireEmailVerified:`Richiedi verifica email`,requireEmailVerifiedDesc:`Accetta il claim email solo se il provider lo contrassegna come verificato.`,requireEmailVerifiedWarning:`Attenzione: l'email sarà accettata senza verifica. Usare solo con provider affidabili.`,requireEmailVerifiedAutoLink:`Disabilitare prima il collegamento automatico per modificare questa impostazione.`,defaultGroup:`Gruppo predefinito`,defaultGroupDesc:`Gruppo assegnato agli utenti creati automaticamente. Ritorno a Viewers se non impostato.`,defaultGroupViewersFallback:`Viewers (predefinito)`,autologin:`Accesso automatico`,autologinDesc:`Reindirizza i visitatori non autenticati direttamente a questo provider. Solo un provider può avere questo flag.`}},encryption:{title:`Stato crittografia MFA`,enabledFromEnv:`Crittografia a riposo abilitata (chiave dalla variabile d'ambiente MFA_ENCRYPTION_KEY)`,enabledFromFile:`Crittografia a riposo abilitata (chiave caricata dalla directory dei dati)`,enabledGenerated:`Crittografia a riposo abilitata con chiave auto-generata`,notConfigured:`Crittografia a riposo non configurata`,notConfiguredDesc:`I segreti TOTP e i client_secrets OIDC sono memorizzati in chiaro. Imposta MFA_ENCRYPTION_KEY o riavvia Bambuddy con una directory dati scrivibile per generarne uno automaticamente.`,allEncrypted:`Tutti i segreti MFA sono crittografati a riposo.`,legacyRowsLabel:`Righe legacy in chiaro`,encryptedRowsLabel:`Righe crittografate`,legacyRowsWarning:`Rilevate {{count}} righe legacy in chiaro. Salva di nuovo il provider OIDC o re-iscrivi l'app authenticator dell'utente per migrare allo storage crittografato.`,backupHint:`La chiave generata automaticamente è memorizzata in DATA_DIR/.mfa_encryption_key ed è inclusa nei backup locali ZIP. Mantieni sicuri i tuoi backup o imposta MFA_ENCRYPTION_KEY esplicitamente.`,decryptionBrokenTitle:`Chiave di crittografia mancante`,decryptionBrokenError:`{{count}} record crittografati non possono essere decifrati perché la chiave di crittografia non è più disponibile. Ripristina il precedente MFA_ENCRYPTION_KEY o DATA_DIR/.mfa_encryption_key per recuperare.`,migrationErrorWarning:`{{count}} riga/righe legacy non sono state ricifrate all'avvio. Controlla i log del server e riavvia Bambuddy per riprovare.`},spoolbuddy:{infoTitle:`Dispositivi SpoolBuddy`,infoBody:`I kiosk SpoolBuddy si registrano automaticamente tramite heartbeat. Annulla la registrazione qui se un dispositivo non è più in uso o se un duplicato obsoleto è rimasto dopo un crash del daemon.`,duplicatesTitle:`{{count}} dispositivi registrati`,duplicatesBody:`Solo il primo dispositivo registrato viene utilizzato dall'interfaccia kiosk. Se uno di questi è un duplicato obsoleto da un crash, annulla la sua registrazione — un dispositivo online si ri-registrerà al prossimo heartbeat.`,empty:`Nessun dispositivo SpoolBuddy registrato.`,online:`Online`,offline:`Offline`,unregister:`Annulla registrazione`,unregisterSuccess:`Dispositivo deregistrato`,unregisterError:`Deregistrazione non riuscita`,confirmTitle:`Annullare la registrazione del dispositivo SpoolBuddy?`,confirmBody:`Questo rimuoverà "{{hostname}}" ({{deviceId}}) dal database. Se il dispositivo è online, si ri-registrerà al prossimo heartbeat.`,ipAddress:`Indirizzo IP`,firmware:`Firmware`,lastSeen:`Ultimo rilevamento`,daemonUptime:`Uptime del daemon`,systemUptime:`Uptime sistema`,never:`mai`,nfc:`NFC`,scale:`Bilancia`,cpuTemp:`Temp. CPU`,cpuLoad:`Carico CPU`,memory:`Memoria`,disk:`Disco`,update:`Aggiorna`,updateConfirmTitle:`Aggiornare il daemon Spoolbuddy?`,updateConfirmBody:`Avviare un aggiornamento software su "{{hostname}}"? Il daemon si riavvierà al termine dell'aggiornamento.`,restartBrowser:`Riavvia browser`,restartBrowserConfirmTitle:`Riavviare il browser del kiosk?`,restartBrowserConfirmBody:`Riavviare il browser del kiosk su "{{hostname}}"? Il display si oscurerà brevemente.`,restartDaemon:`Riavvia daemon`,restartDaemonConfirmTitle:`Riavviare il daemon Spoolbuddy?`,restartDaemonConfirmBody:`Riavviare il daemon Spoolbuddy su "{{hostname}}"? Il dispositivo sarà offline per alcuni secondi.`,reboot:`Riavvia`,rebootConfirmTitle:`Riavviare il dispositivo?`,rebootConfirmBody:`Riavviare "{{hostname}}"? Il dispositivo sarà offline per circa un minuto.`,shutdown:`Spegni`,shutdownConfirmTitle:`Spegnere il dispositivo?`,shutdownConfirmBody:`Spegnere "{{hostname}}"? Sarà necessario un accesso fisico per riaccenderlo.`,commandConfirm:`Conferma`,commandQueued:`Comando in coda`,commandError:`Invio comando non riuscito`},pipelineLimits:{title:`Limiti pipeline dello slicer`,maxCopiesLabel:`Copie massime per esecuzione`,maxCopiesDesc:`Limite superiore alle copie che gli operatori possono richiedere durante l'esecuzione di una pipeline. Il limite massimo lato server è 1000.`},pipelines:{title:`Pipeline dello Slicer`,subtitle:`Bundle di preset riutilizzabili (stampante + processo + filamenti + tipo di piatto). Salvane uno dal dialogo Slice e applicalo con un clic al file successivo.`,loading:`Caricamento pipeline…`,loadError:`Impossibile caricare le pipeline.`,confirmDelete:`Eliminare questa pipeline? L'operazione non può essere annullata.`,staleWarning:`Uno o più preset referenziati non esistono più. Risalva questa pipeline dal dialogo Slice per ripararla.`,empty:{title:`Nessuna pipeline ancora.`,howto:`Apri il dialogo Slice per un file, scegli stampante / processo / filamenti / piatto, poi clicca "Salva come pipeline". Le tue pipeline salvate appariranno qui.`},field:{name:`Nome pipeline`,description:`Descrizione`,targetPrinter:`Stampante di destinazione`,noTarget:`— Nessuna destinazione —`,targetKind:`Tipo destinazione`,targetKindSpecific:`Stampante specifica`,targetKindClass:`Classe stampante`,targetModelClass:`Modello stampante`,fanoutStrategy:`Strategia di distribuzione`,fanout:{max_parallel:`Max parallelo — distribuisci su qualsiasi stampante libera corrispondente`,round_robin:`Round robin — alterna tra stampanti idonee`,fill_one_first:`Riempi una prima — assegna tutte le copie a una stampante`},fanoutShort:{max_parallel:`parallelo`,round_robin:`round robin`,fill_one_first:`prima una`}},action:{save:`Salva`,cancel:`Annulla`,rename:`Rinomina`,delete:`Elimina`},slot:{printer:`Stampante`,process:`Processo`,filament:`Filamento`,filamentN:`Filamento {{n}}`,filamentAll:`Tutti i {{n}} slot`,bed:`Piatto`},group:{profiles:`Profili`,filaments:`Filamenti`},searchPlaceholder:`Cerca pipeline…`,filterTargetType:`Filtra per tipo di destinazione`,filterTarget:`Filtra per destinazione`,filter:{all:`Tutte le destinazioni`,noTarget:`Nessuna destinazione`,count:`{{shown}} / {{total}}`,noMatches:`Nessuna pipeline corrisponde ai filtri attuali.`},toast:{saved:`Pipeline salvata`,saveFailed:`Salvataggio non riuscito`,deleted:`Pipeline eliminata`,deleteFailed:`Eliminazione non riuscita`},noTargetHint:`Imposta una stampante di destinazione per eseguire`,noTargetWarning:`Imposta una stampante di destinazione prima di eseguire questa pipeline.`,runs:{lastRun:`Ultima esecuzione`,status:{queued:`in coda`,slicing:`slicing`,dispatching:`invio`,in_progress:`stampa`,completed:`completata`,failed:`fallita`,partial_failure:`fallimento parziale`,cancelled:`annullata`}}}},notification:{printStarted:{title:`Stampa avviata`,body:`{{printer}}: {{filename}} ha iniziato a stampare`},printCompleted:{title:`Stampa completata`,body:`{{printer}}: {{filename}} completata con successo`},printFailed:{title:`Stampa fallita`,body:`{{printer}}: {{filename}} fallita`},printStopped:{title:`Stampa interrotta`,body:`{{printer}}: {{filename}} interrotta`},printProgress:{title:`Avanzamento stampa`,body:`{{printer}}: {{filename}} al {{percent}}% completamento`},printerOffline:{title:`Stampante offline`,body:`{{printer}} e offline`},printerError:{title:`Errore stampante`,body:`{{printer}} – {{error}}`},filamentLow:{title:`Filamento in esaurimento`,body:`{{printer}}: Filamento in esaurimento`},maintenanceDue:{title:`Manutenzione dovuta`,body:`{{printer}}: {{items}} richiedono attenzione`}},errors:{generic:`Qualcosa e andato storto`,networkError:`Errore di rete. Controlla la connessione.`,notFound:`Non trovato`,unauthorized:`Non autorizzato`,serverError:`Errore server`,validationError:`Controlla i dati inseriti`,printerConnectionFailed:`Connessione alla stampante fallita`,saveFailed:`Salvataggio modifiche fallito`,deleteFailed:`Eliminazione fallita`,loadFailed:`Caricamento dati fallito`},hmsErrors:{title:`Errori - {{name}}`,noErrors:`Nessun errore`,viewOnWiki:`Vedi su Bambu Lab Wiki`,mqttVerifyFailedRemedy:`Attiva la modalita sviluppatore sulla stampante, riavvia la stampante e avvia di nuovo il lavoro.`,unknownCode:`Codice HMS sconosciuto — consulta la wiki di Bambu Lab per i dettagli.`,clearInstructions:`Cancella gli errori sulla stampante per rimuoverli qui.`,clearErrors:`Cancella errori`,clearSuccess:`Errori HMS cancellati`,clearFailed:`Impossibile cancellare gli errori HMS`,actionSuccess:`Azione inviata alla stampante`,actionFailed:`Impossibile inviare l'azione`,runoutExpectedSlot:`Il filamento in {{ranOut}} è esaurito. La stampante ora attende filamento compatibile in {{expected}}. Inserisci una bobina in {{expected}}, quindi seleziona Riprova.`,runoutExpectedSlotOnly:`La stampante attende filamento compatibile in {{expected}}. Inserisci lì una bobina, quindi seleziona Riprova.`,runoutSlotUnknown:`Il filamento è esaurito e la stampa è in pausa. Bambuddy non è riuscito a determinare quale slot la stampante attende ora — controlla lo schermo della stampante per lo slot richiesto.`,actions:{RESUME_PRINTING:`Riprendi stampa`,RESUME_PRINTING_DEFECTS:`Riprendi (difetti accettabili)`,RESUME_PRINTING_PROBELM_SOLVED:`Riprendi (problema risolto)`,STOP_PRINTING:`Ferma stampa`,CHECK_ASSISTANT:`Apri assistente`,FILAMENT_EXTRUDED:`Filamento estruso, continua`,RETRY_FILAMENT_EXTRUDED:`Non ancora estruso, riprova`,CONTINUE:`Completato, continua`,LOAD_VIRTUAL_TRAY:`Carica filamento`,OK_BUTTON:`OK`,FILAMENT_LOAD_RESUME:`Filamento caricato, riprendi`,JUMP_TO_LIVEVIEW:`Visualizza in diretta`,NO_REMINDER_NEXT_TIME:`Non ricordare la prossima volta`,REFRESH_NOZZLE:`Ricontrolla`,IGNORE_NO_REMINDER_NEXT_TIME:`Ignora e non ricordare`,IGNORE_RESUME:`Ignora e riprendi`,PROBLEM_SOLVED_RESUME:`Problema risolto, riprendi`,TURN_OFF_FIRE_ALARM:`Capito, spegni allarme antincendio`,RETRY_PROBLEM_SOLVED:`Riprova (problema risolto)`,CANCLE:`Annulla`,STOP_DRYING:`Ferma essiccazione`,PROCEED:`Procedi`,OK_JUMP_RACK:`OK`,ABORT:`Annulla`,DISABLE_PURIFICATION:`Disattiva purificazione per questa stampa`,DONT_REMIND_NEXT_TIME:`Non ricordarmelo`,DBL_CHECK_CANCEL:`Annulla`,DBL_CHECK_DONE:`Fatto`,DBL_CHECK_RETRY:`Riprova`,DBL_CHECK_RESUME:`Riprendi`,DBL_CHECK_OK:`Conferma`,REMOVE_CLOSE_BTN:`Chiudi`}},mqttDebug:{title:`Log debug MQTT`,searchPlaceholder:`Cerca topic o payload...`,noMessages:`Nessun messaggio registrato`,startLoggingHint:`Clicca "Avvia logging" per iniziare a catturare messaggi MQTT`,noMessagesMatch:`Nessun messaggio corrisponde al filtro`,adjustFilterHint:`Prova a modificare la ricerca o i filtri`,incoming:`In ingresso`,outgoing:`In uscita`,loggingStopped:`Logging fermato`,loggingActive:`Logging attivo - i messaggi si aggiornano automaticamente`,startLogging:`Avvia logging`,stopLogging:`Ferma logging`,clearLog:`Pulisci log`,topic:`Argomento`,timestamp:`Timestamp`,direction:`Direzione`,all:`Tutti`},printerFiles:{zipStarted_one:`Download ZIP avviato per {{count}} file`,zipStarted_other:`Download ZIP avviato per {{count}} file`,zipPartial:`Download ZIP avviato con {{successful}} file su {{total}}; non è stato possibile recuperare gli altri`,downloadFailed:`Download non riuscito: {{error}}`,unknownError:`Errore sconosciuto`,shiftSelectHint:`Maiusc-clic per selezionare un intervallo`,selectFile:`Seleziona {{name}}`,deselectFile:`Deseleziona {{name}}`,title:`Gestore file`,storageUsed:`Usato:`,storageFree:`Libero:`,filterPlaceholder:`Filtra file...`,deleteButton:`Elimina`,deleteFiles:`Elimina {{count}} file`,deleteFileConfirm:`Eliminare "{{name}}"? Questa azione non può essere annullata.`,deleteFilesConfirm:`Eliminare {{count}} file selezionati? Questa azione non può essere annullata.`,noFiles:`Nessun file sulla stampante`,printerUnavailable:`Il servizio file della stampante non è disponibile. Riprova quando la stampante è raggiungibile.`,loadingFiles:`Caricamento file...`,failedToLoad:`Caricamento file fallito`,toast:{filesDeleted:`Eliminati {{count}} file`,deleteFailed:`Eliminazione fallita: {{error}}`}},confirm:{delete:`Sei sicuro di voler eliminare questo?`,unsavedChanges:`Hai modifiche non salvate. Sei sicuro di voler uscire?`,clearQueue:`Sei sicuro di voler svuotare la coda?`},login:{title:`Login Bambuddy`,subtitle:`Accedi al tuo account`,username:`Nome utente`,usernamePlaceholder:`Inserisci il nome utente`,usernameOrEmail:`Nome utente o email`,usernameOrEmailPlaceholder:`Nome utente o @ Email`,password:`Password`,passwordPlaceholder:`Inserisci la password`,signIn:`Accedi`,signingIn:`Accesso in corso...`,rememberMe:`Ricordami`,forgotPassword:`Hai dimenticato la password?`,autologinFailed:`Accesso SSO automatico fallito. Scegli un provider qui sotto per continuare.`,localDisabledNotice:`L'accesso locale è disabilitato. Usa uno dei provider SSO qui sotto.`,loginSuccess:`Accesso riuscito`,loginFailed:`Accesso fallito`,enterCredentials:`Inserisci nome utente e password`,enterEmail:`Inserisci il tuo indirizzo e-mail`,oidcLoginFailed:`Accesso OIDC fallito`,oidcErrors:{providerError:`Il provider di identità ha restituito un errore`,missingParameters:`Parametri obbligatori mancanti nel callback OIDC`,invalidState:`Lo stato OIDC non è valido o è già stato utilizzato`,stateExpired:`La sessione OIDC è scaduta — riprovare`,providerNotFound:`Provider OIDC non trovato`,discoveryFailed:`Impossibile recuperare il documento di discovery OIDC`,invalidDiscovery:`Il documento di discovery OIDC non è valido`,networkError:`Errore di rete durante lo scambio di token OIDC`,badResponse:`Risposta inattesa durante lo scambio di token OIDC`,noIdToken:`Il provider OIDC non ha restituito un ID token`,validationFailed:`La validazione del token OIDC non è riuscita`,nonceMismatch:`Il nonce OIDC non corrisponde — possibile attacco di replay`,missingSubClaim:`Il token OIDC è privo del claim sub`,noLinkedAccount:`Nessun account locale è collegato a questa identità OIDC`,accountInactive:`Il tuo account è inattivo`,userResolutionFailed:`Impossibile risolvere il tuo account`,internalError:`Si è verificato un errore interno durante il login OIDC`,tokenExchangeFailed:`Lo scambio di token OIDC non è riuscito`},forgotPasswordTitle:`Password dimenticata`,forgotPasswordMessage:`Se hai dimenticato la password, contatta il tuo amministratore di sistema per reimpostarla.`,forgotPasswordEmailMessage:`Inserisci il tuo indirizzo email e ti invieremo una nuova password.`,emailAddress:`Indirizzo email`,emailPlaceholder:`tua.email@esempio.com`,cancel:`Annulla`,sending:`Invio...`,sendResetEmail:`Invia email di reimpostazione`,howToReset:`Come reimpostare la password:`,resetStep1:`Contatta il tuo amministratore Bambuddy`,resetStep2:`Chiedi di reimpostare la password in Gestione utenti`,resetStep3:`Possono impostare una nuova password temporanea`,resetStep4:`Accedi con la nuova password e cambiala in Impostazioni`,gotIt:`Capito`,twoFA:{title:`Autenticazione a due fattori`,subtitle:`Il tuo account è protetto da 2FA. Inserisci il codice di verifica qui sotto.`,methodAuthenticator:`App di autenticazione`,methodEmail:`Codice via e-mail`,methodBackup:`Codice di recupero`,instructionsTotp:`Apri la tua app di autenticazione e inserisci il codice a 6 cifre per Bambuddy.`,instructionsEmail:`Un codice a 6 cifre è stato inviato al tuo indirizzo e-mail. È valido per 10 minuti.`,instructionsEmailNotSent:`Clicca il pulsante qui sotto per ricevere un codice di verifica via e-mail.`,instructionsBackup:`Inserisci uno dei tuoi codici di recupero a 8 caratteri. Ogni codice può essere utilizzato una sola volta.`,sendCodeButton:`Invia codice via e-mail`,sendingCode:`Invio in corso...`,resendCode:`Invia nuovamente il codice`,codeLabel:`Codice di verifica`,backupCodeLabel:`Codice di recupero`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Verifica`,verifyingButton:`Verifica in corso...`,backToLogin:`← Torna alla pagina di accesso`,orContinueWith:`oppure accedi con`,signInWith:`Accedi con {{provider}}`,enterCode:`Inserisci il codice di verifica`,sendCodeFailed:`Invio del codice di verifica non riuscito`,invalidCode:`Codice non valido. Riprova.`},resetPassword:{title:`Imposta nuova password`,subtitle:`Inserisci e conferma la nuova password qui sotto.`,newPassword:`Nuova password`,newPasswordPlaceholder:`Almeno 8 caratteri`,confirmPassword:`Conferma password`,confirmPasswordPlaceholder:`Ripeti la nuova password`,saving:`Salvataggio…`,submit:`Imposta nuova password`,backToLogin:`Torna al login`,passwordsDoNotMatch:`Le password non coincidono`,passwordTooShort:`La password deve avere almeno 8 caratteri`,resetFailed:`Reimpostazione non riuscita. Il link potrebbe essere scaduto.`}},setup:{title:`Configurazione Bambuddy`,subtitle:`Configura autenticazione per la tua istanza Bambuddy`,enableAuth:`Abilita autenticazione`,adminAccount:`Account admin`,adminAccountDesc:`Se esistono già admin, l'autenticazione verrà abilitata usando gli account esistenti. Lascia i campi sotto vuoti per usare gli admin esistenti, oppure inserisci nuove credenziali per creare un nuovo utente admin.`,adminUsername:`Nome utente admin`,adminPassword:`Password admin`,optionalIfAdminExists:`(opzionale se esistono admin)`,adminUsernamePlaceholder:`Inserisci nome utente admin (opzionale)`,adminPasswordPlaceholder:`Inserisci password admin (opzionale)`,confirmPassword:`Conferma password`,confirmPasswordPlaceholder:`Conferma password admin`,settingUp:`Configurazione...`,completeSetup:`Completa configurazione`,toast:{authEnabledAdminCreated:`Autenticazione abilitata e utente admin creato`,authEnabledExistingAdmins:`Autenticazione abilitata usando admin esistenti`,setupCompleted:`Configurazione completata`,enterBothCredentials:`Inserisci nome utente e password admin, oppure lascia entrambi vuoti per usare admin esistenti`,passwordsDoNotMatch:`Le password non coincidono`,passwordTooShort:`La password deve essere di almeno 6 caratteri`}},changePassword:{title:`Cambia password`,currentPassword:`Password attuale`,currentPasswordPlaceholder:`Inserisci password attuale`,newPassword:`Nuova password`,newPasswordPlaceholder:`Inserisci nuova password (min 6 caratteri)`,confirmPassword:`Conferma nuova password`,confirmPasswordPlaceholder:`Conferma nuova password`,passwordsDoNotMatch:`Le password non coincidono`,passwordTooShort:`La password deve essere di almeno 6 caratteri`,changing:`Modifica in corso...`,success:`Password cambiata con successo`,failed:`Modifica password fallita`},plateAlert:{title:`Stampa in pausa!`,message:`Oggetti rilevati sul piatto. La stampa è stata messa automaticamente in pausa. Svuota il piatto e riprendi la stampa.`,understand:`Ho capito`},camera:{title:`Vista camera`,invalidPrinterId:`ID stampante non valido`,live:`Live`,snapshot:`Istantanea`,restartStream:`Riavvia stream`,refreshSnapshot:`Aggiorna snapshot`,fullscreen:`Schermo intero`,exitFullscreen:`Esci da schermo intero`,connectingToCamera:`Connessione alla camera...`,capturingSnapshot:`Acquisizione snapshot...`,connectionLost:`Connessione persa`,connectionFailed:`Connessione camera fallita`,reconnecting:`Riconnessione tra {{countdown}}s... (tentativo {{attempt}}/{{max}})`,reconnectNow:`Riconnetti ora`,cameraUnavailable:`Camera non disponibile`,cameraUnavailableDesc:`Assicurati che la stampante sia accesa e connessa.`,noCamera:`Nessuna camera disponibile`,retry:`Riprova`,cameraStream:`Stream camera`,zoomOut:`Zoom indietro`,zoomIn:`Zoom avanti`,resetZoom:`Reimposta zoom`,recording:`Registrazione`,startRecording:`Avvia registrazione`,stopRecording:`Ferma registrazione`,chamberLight:`Accendi/Spegni luce camera`,unavailable:`Telecamera non disponibile`,diagnose:{button:`Diagnostica`,modalTitle:`Diagnostica telecamera`,running:`Diagnostica in corso...`,runFailed:`Impossibile eseguire la diagnostica: {{error}}`,retry:`Riesegui`,stage:{tcp_reachable:`Raggiungibilità di rete`,first_frame:`Acquisizione frame`,live_stream_active:`Stream live attivo`},summary:{all_ok:`La telecamera funziona. La diagnostica ha completato tutte le fasi con successo.`,live_stream_active_healthy:`La telecamera sta trasmettendo con frame recenti — nessun test necessario.`,printer_unreachable:`La stampante non è raggiungibile. Verifica l'indirizzo IP, la connessione di rete e che la stampante sia accesa.`,camera_port_closed:`La stampante risponde ma la porta della telecamera è chiusa. Assicurati che la modalità LAN e la modalità sviluppatore siano attive nelle impostazioni della stampante.`,no_frame:`Connessione alla telecamera riuscita ma nessun frame ricevuto. Riprova o verifica che la telecamera sia abilitata nelle impostazioni della stampante.`,unknown_failure:`Diagnostica della telecamera fallita per motivo sconosciuto. Controlla il log di supporto per i dettagli.`},meta:{protocol:`Protocollo`,port:`Porta`,profile:`Profilo`}}},groups:{title:`Gestione gruppi`,subtitle:`Gestisci gruppi permessi per controllo accesso`,backToSettings:`Torna a Impostazioni`,createGroup:`Crea gruppo`,noPermission:`Non hai il permesso di accedere a questa pagina.`,system:`Sistema`,noDescription:`Nessuna descrizione`,usersCount:`{{count}} utenti`,permissionsCount:`{{count}} permessi`,edit:`Modifica`,delete:`Elimina`,toast:{created:`Gruppo creato con successo`,updated:`Gruppo aggiornato con successo`,deleted:`Gruppo eliminato con successo`,enterGroupName:`Inserisci un nome gruppo`},modal:{editGroup:`Modifica gruppo`,createGroup:`Crea gruppo`,cancel:`Annulla`,saving:`Salvataggio...`,creating:`Creazione...`,saveChanges:`Salva modifiche`},form:{groupName:`Nome gruppo`,groupNamePlaceholder:`Inserisci nome gruppo`,systemGroupWarning:`I nomi dei gruppi di sistema non possono essere modificati`,description:`Descrizione`,descriptionPlaceholder:`Inserisci descrizione (opzionale)`,permissions:`Permessi ({{count}} selezionati)`},deleteModal:{title:`Elimina gruppo`,message:`Sei sicuro di voler eliminare questo gruppo? Gli utenti in questo gruppo perderanno questi permessi.`,confirm:`Elimina gruppo`},editor:{title:`Modifica gruppo`,createTitle:`Crea gruppo`,search:`Cerca permessi...`,selectAll:`Seleziona tutto`,clearAll:`Deseleziona tutto`,permissionsSelected:`{{count}} selezionati`,noResults:`Nessun permesso corrisponde alla ricerca`,websocketHint:`Necessario per gli aggiornamenti in tempo reale. Senza questo permesso, l'interfaccia ripiega sul polling periodico.`}},users:{title:`Gestione utenti`,subtitle:`Gestisci utenti e accesso alla tua istanza Bambuddy`,backToSettings:`Torna a Impostazioni`,createUser:`Crea utente`,noPermission:`Non hai il permesso di accedere a questa pagina.`,admin:`Amministratore`,noGroups:`Nessun gruppo`,active:`Attivo`,inactive:`Inattivo`,edit:`Modifica`,delete:`Elimina`,system:`Sistema`,noGroupsAvailable:`Nessun gruppo disponibile`,table:{username:`Nome utente`,groups:`Gruppi`,status:`Stato`,actions:`Azioni`},toast:{created:`Utente creato con successo`,updated:`Utente aggiornato con successo`,deleted:`Utente eliminato con successo`,fillRequired:`Compila tutti i campi obbligatori`,passwordsDoNotMatch:`Le password non coincidono`,passwordTooShort:`La password deve essere di almeno 6 caratteri`,ldapProvisioned:`Utente LDAP "{{username}}" provisionato`},modal:{createUser:`Crea utente`,editUser:`Modifica utente`,cancel:`Annulla`,creating:`Creazione...`,saving:`Salvataggio...`,saveChanges:`Salva modifiche`,advancedAuthSubtitle:`con autenticazione avanzata`,tabsAriaLabel:`Origine utente`,localTab:`Locale`,ldapTab:`LDAP`,ldapSearchLabel:`Cerca nella directory`,ldapSearchPlaceholder:`Digita un nome utente, nome o e-mail...`,ldapMinChars:`Digita almeno 2 caratteri per cercare`,ldapTypeToSearch:`Inizia a digitare per cercare nella directory LDAP`,ldapSearching:`Ricerca nella directory...`,ldapNoResults:`Nessun utente corrispondente nella directory`,ldapSearchError:`Ricerca nella directory fallita. Verifica lo stato del server LDAP.`,ldapAlreadyProvisioned:`Già provisionato`,ldapSelectedLabel:`Selezionato`,ldapProvision:`Provisiona utente`,ldapProvisioning:`Provisioning...`,ldapErrorProvision:`Provisioning fallito. Verifica lo stato del server LDAP e riprova.`},form:{username:`Nome utente`,usernamePlaceholder:`Inserisci nome utente`,email:`E-mail`,emailPlaceholder:`utente@esempio.com`,password:`Password`,passwordPlaceholder:`Inserisci password`,confirmPassword:`Conferma password`,confirmPasswordPlaceholder:`Conferma password`,newPasswordPlaceholder:`Inserisci nuova password`,confirmNewPasswordPlaceholder:`Conferma nuova password`,leaveBlankToKeep:`lascia vuoto per mantenere attuale`,groups:`Gruppi`,optional:`opzionale`,autoGeneratedPassword:`Una password sicura verrà generata automaticamente e inviata via email all'utente.`,passwordManagedByAdvancedAuth:`La password è gestita dall'autenticazione avanzata. Usa "Reimposta password" per inviare una nuova password all'utente via email.`,resetPassword:`Reimposta password`,resettingPassword:`Reimpostazione password...`},deleteModal:{title:`Elimina utente`,message:`Sei sicuro di voler eliminare questo utente? Questa azione non può essere annullata.`,confirm:`Elimina utente`}},streamOverlay:{title:`Overlay stream`,invalidPrinterId:`ID stampante non valido`,cameraStream:`Stream camera`,progress:`Avanzamento`,eta:`ETA`,printerIdle:`Stampante inattiva`,printerOffline:`Stampante offline`,builder:{title:`Overlay per streaming`,description:`Compone l'URL di un overlay per streaming: una vista telecamera a schermo intero con i dati di stampa in tempo reale sovrapposti, per OBS, un display a parete o qualsiasi sorgente browser. Scegli i campi e copia l'URL.`,printer:`Stampante`,size:`Dimensione del testo`,sizeSmall:`Piccola`,sizeMedium:`Media`,sizeLarge:`Grande`,fps:`Frequenza fotogrammi`,fpsHint:`Le telecamere A1 e P1 si fermano intorno a 5 fps, qualunque valore venga richiesto.`,token:`Token overlay (facoltativo)`,tokenHint:`Serve solo con il login attivo: OBS non ha una sessione propria. Creane uno sopra con ambito Overlay per streaming.`,tokenWarning:`Questo URL contiene un token: chi riesce a leggerlo può vedere lo streaming e il nome del file. Revoca il token per interrompere l'accesso.`,fields:`Campi da mostrare`,fieldPrinter:`Nome stampante`,fieldFilename:`Nome file`,fieldStatus:`Stato`,fieldProgress:`Barra di avanzamento`,fieldLayers:`Numero di layer`,fieldEta:`Tempo rimanente e orario di fine`,fieldCamera:`Immagine telecamera`,chamberHint:`La temperatura della camera compare solo sui modelli con un vero sensore: P1 e A1 riportano un valore privo di significato, quindi viene omessa.`,urlTitle:`URL overlay`,open:`Apri`,showPreview:`Mostra anteprima`,hidePreview:`Nascondi anteprima`,previewTitle:`Anteprima overlay`},status:{printing:`In stampa`,paused:`In pausa`,finished:`Completata`,failed:`Fallita`,idle:`Inattiva`,unknown:`Sconosciuto`}},profiles:{title:`Profili`,subtitle:`Gestisci preset slicer e calibrazioni pressure advance`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Profili locali`,kprofiles:`Profili K`},orcaCloud:{connectedAs:`Connesso come`,connectedShort:`Connesso a Orca Cloud`,logout:`Disconnetti`,noLogoutPermission:`Non hai il permesso di disconnetterti`,noConnectPermission:`Non hai il permesso di connetterti a Orca Cloud`,retry:`Riprova`,connectButton:`Connetti Orca Cloud`,connect:{title:`Connetti a Orca Cloud`,description:`Accedi al tuo account Orca Cloud per sincronizzare i profili dello slicer in Bambuddy.`},device:{title:`Approva Bambuddy in Orca Cloud`,instruction:`Apri Orca Cloud e approva questo codice. Bambuddy si connette automaticamente non appena approvi.`,codeLabel:`Il tuo codice di associazione`,openButton:`Apri la pagina di approvazione di Orca Cloud`,manualHint:`Oppure vai su {{url}} e inserisci il codice qui sopra.`,waiting:`In attesa della tua approvazione…`,cancel:`Annulla`},profiles:{title:`I tuoi profili Orca Cloud ({{count}})`,refresh:`Aggiorna`,empty:`Nessun profilo trovato nel tuo account Orca Cloud.`},toast:{disconnected:`Disconnesso da Orca Cloud`},errors:{startFailed:`Impossibile avviare l'accesso a Orca Cloud.`,denied:`L'associazione è stata rifiutata in Orca Cloud.`,expired:`Il codice di associazione è scaduto. Fai clic su Connetti per riprovare.`,pollFailed:`Connessione persa durante l'attesa dell'approvazione. Riprova.`}},localProfiles:{title:`Profili locali`,subtitle:`Importa e gestisci preset slicer da OrcaSlicer`,import:`Importa profili`,importDesc:`Trascina file .bbscfg, .bbsflmt, .orca_filament, .zip o .json qui`,importing:`Importazione...`,search:`Cerca preset locali...`,noPresets:`Nessun preset locale ancora`,noSearchResults:`Nessun preset corrisponde alla ricerca`,badge:`Locale`,edit:`Modifica`,delete:`Elimina`,cancel:`Annulla`,deleteConfirmTitle:`Elimina preset`,deleteConfirm:`Sei sicuro di voler eliminare questo preset? Questa azione non può essere annullata.`,source:`Fonte`,inheritsFrom:`Eredita da`,filamentType:`Tipo`,vendor:`Produttore`,compatiblePrinters:`Stampanti`,nozzleTemp:`Temp. ugello`,cost:`Costo`,density:`Densità`,pressureAdvance:`Pressure Advance`,filament:`Filamento`,process:`Processo`,printer:`Stampante`,toast:{importSuccess:`{{count}} preset importati`,importSkipped:`{{count}} preset saltati (duplicati)`,importError:`{{count}} errori durante l'importazione`,deleted:`Preset eliminato`,updated:`Preset aggiornato`}},connectedAs:`Connesso come`,signInExpiredTitle:`Accesso a Bambu Cloud scaduto`,signInExpiredBody:`Bambu Lab non accetta più il token salvato. Accedi di nuovo per ripristinare i profili cloud, le importazioni da MakerWorld e i controlli del firmware.`,logout:`Esci`,noLogoutPermission:`Non hai il permesso di disconnetterti`,failedToLoad:`Caricamento profili fallito`,retry:`Riprova`,time:{justNow:`Proprio ora`,minsAgo:`{{count}}m fa`,hoursAgo:`{{count}}h fa`,daysAgo:`{{count}}g fa`},toast:{loggedOut:`Disconnesso`},login:{title:`Connetti a Bambu Cloud`,subtitle:`Sincronizza i preset del slicer tra dispositivi`,email:`E-mail`,password:`Password`,region:`Regione`,regionGlobal:`Globale`,regionChina:`Cina`,verificationCode:`Codice di verifica`,totpCode:`Codice autenticatore`,checkEmail:`Controlla la tua email ({{email}}) per un codice a 6 cifre`,enterTotpHint:`Inserisci il codice a 6 cifre dalla tua app autenticatore`,accessToken:`Token di accesso`,accessTokenHint:`Incolla il tuo access token Bambu Cloud. Gli account della regione Cina devono usare questa via (vincolati al numero di telefono — login via e-mail non disponibile). Il wiki spiega come recuperare il token dai cookie di MakerWorld.`,back:`Indietro`,loginButton:`Accedi`,verifyButton:`Verifica`,setTokenButton:`Imposta token`,useToken:`Usa access token invece`,captchaTitle:`Bambu Cloud richiede un CAPTCHA`,captchaBody:`Bambu sta richiedendo un CAPTCHA alla tua rete prima di accettare un accesso, e la verifica non può essere completata da Bambuddy. Email e password non sono il problema. Il blocco è legato al tuo indirizzo IP pubblico e di solito si risolve da solo entro qualche ora; riprovare di continuo lo prolunga. Per accedere subito, usa invece un token di accesso preso da una sessione del browser.`,useEmail:`Accedi con email invece`,toast:{loggedIn:`Accesso riuscito`,codeSent:`Codice di verifica inviato via email`,enterTotp:`Inserisci il codice dalla tua app autenticatore`,tokenSet:`Token impostato con successo`}},presets:{myPreset:`Il mio preset (modificabile)`,duplicate:`Duplica`,editable:`Modificabile`,failedToLoadDetails:`Caricamento dettagli preset fallito`,deleteConfirm:`Eliminare questo preset?`,deleteWarning:`Questo eliminerà definitivamente "{{name}}" da Bambu Cloud. Questa azione non può essere annullata.`,noDuplicatePermission:`Non hai il permesso di duplicare preset`,noEditPermission:`Non hai il permesso di modificare preset`,noDeletePermission:`Non hai il permesso di eliminare preset`,types:{filament:`Preset filamento`,printer:`Preset stampante`,process:`Preset processo`},toast:{deleted:`Preset eliminato`,created:`Preset creato`,updated:`Preset aggiornato`,duplicated:`Preset duplicato`,fieldAdded:`Campo "{{key}}" aggiunto`,exported:`Preset esportato`},baseLabel:`Base: {{name}}`,currentLabel:`Corrente: {{name}}`,newPreset:`Nuovo preset`,editPreset:`Modifica preset`,duplicatePreset:`Duplica preset`,createNewPreset:`Crea nuovo preset`,customizeSettings:`Personalizza le impostazioni per il nuovo preset`,compareWithBase:`Confronta con base`,compare:`Confronta`,basePreset:`Preset base`,selectBasePreset:`Seleziona preset base...`,presetName:`Nome preset`,myCustomPreset:`Il mio preset personalizzato`,inheritsFrom:`Deriva da`,dropJsonToImport:`Rilascia JSON per importare`,tabs:{common:`Comune`,allFields:`Tutti i campi`},availableFields:`Campi disponibili`,searchFieldsPlaceholder:`Cerca campi...`,noMatchingFields:`Nessun campo corrispondente`,allFieldsAdded:`Tutti i campi aggiunti`,addCustomField:`Aggiungi campo personalizzato`,yourOverrides:`Le tue override`,noOverridesYet:`Nessun override ancora`,clickFieldsToAdd:`Clicca i campi a sinistra per aggiungerli`,saveAsTemplate:`Salva come template`,jsonTip:`Suggerimento: trascina e rilascia un file .json ovunque in questa modale per importare impostazioni`},cloudView:{searchPlaceholder:`Cerca preset...`,templates:`Template`,refresh:`Aggiorna`,newPreset:`Nuovo preset`,clearFilters:`Pulisci filtri`,compareMode:`Modalita confronto`,selectAnotherPreset:`Seleziona un altro preset {{type}}`,clickTwoPresets:`Clicca due preset dello stesso tipo per confrontare`,selectFirst:`1. Seleziona il primo`,selectSecond:`2. Seleziona il secondo`,compareNow:`Confronta ora`,lastSynced:`Ultima sincronizzazione:`,showingCount:`Mostrati {{showing}} di {{total}} preset`,noPresetsFound:`Nessun preset trovato`,columns:{filament:`Filamento`,process:`Processo`,printer:`Stampante`},noFilamentPresets:`Nessun preset filamento`,noProcessPresets:`Nessun preset processo`,noPrinterPresets:`Nessun preset stampante`,filters:{type:`Tipo`,owner:`Proprietario`,printer:`Stampante`,nozzle:`Ugello`,filament:`Filamento`,layer:`Layer`,all:`Tutti`,myPresets:`I miei preset`,builtIn:`Integrati`,process:`Processo`},noTemplatesPermission:`Non hai il permesso di gestire i template`,noRefreshPermission:`Non hai il permesso di aggiornare i profili`,noCreatePermission:`Non hai il permesso di creare preset`},templates:{title:`Template rapidi`,noTemplates:`Nessun template ancora`,createFirst:`Crea template dall'editor preset`,typeFilter:`Tipo:`,deleteTitle:`Elimina template`,deleteWarning:`Questa azione non può essere annullata`,deleteConfirm:`Sei sicuro di voler eliminare "{{name}}"?`,namePlaceholder:`Nome template`,descriptionPlaceholder:`Descrizione`,settingsJson:`Impostazioni (JSON)`,fieldsCount:`{{count}} campi`,shownInModals:`Mostrati nelle modali`,hiddenInModals:`Nascosti nelle modali`,apply:`Applica`,toast:{deleted:`Template eliminato`,updated:`Template aggiornato`,created:`Template creato`,applied:`Template applicato`}}},support:{debugLoggingActive:`Log debug attivo`,manageLogs:`Gestisci`,collectItem7:`Connettività stampante e versioni firmware`,collectItem8:`Stato integrazioni (Spoolman, MQTT, HA)`,collectItem9:`Interfacce di rete (solo subnet)`,collectItem10:`Versioni dei pacchetti Python`,collectItem11:`Controlli di integrità del database`,collectItem12:`Dettagli dell'ambiente Docker`,bundleGenerating:`Generazione del pacchetto...`,bundleStepConnection:`Controlli di connettività delle stampanti in corso`,bundleStepVirtualPrinters:`Controlli di configurazione delle stampanti virtuali in corso`,bundleStepLogScan:`Analisi dei log recenti per problemi noti`,bundleStepBuild:`Creazione dello ZIP del pacchetto di supporto`},fileManager:{variants:{badge:`{{count}} versioni`,groupAction:`Raggruppa come versioni`,groupTooltip:`Segna questi file come lo stesso lavoro elaborato per stampanti diverse`,grouped:`{{count}} file raggruppati come versioni`,printAlternatives:`Stampa ({{count}} alternative)`},title:`Gestore file`,subtitle:`Organizza e gestisci i tuoi file di stampa`,uploadFiles:`Carica file`,newFolder:`Nuova cartella`,folderName:`Nome cartella`,folderNamePlaceholder:`es., Parti funzionali`,renameFile:`Rinomina file`,renameFolder:`Rinomina cartella`,invalidFilenameChar:`Il carattere "{{char}}" non è consentito nei nomi dei file di stampa. La scheda SD della stampante rifiuta: < > : " / \\ | ? *`,moveFiles:`Sposta {{count}} file`,rootNoFolder:`Root (nessuna cartella)`,current:`corrente`,linkFolder:`Collega cartella`,linkFolderDescription:`Collega "{{name}}" a un progetto o archivio per accesso rapido.`,project:`Progetto`,archive:`Archivio`,noProjectsFound:`Nessun progetto trovato`,noArchivesFound:`Nessun archivio trovato`,unlink:`Scollega`,link:`Collega`,dragDropFiles:`Trascina e rilascia file qui`,dropFilesHere:`Rilascia file qui`,releaseToUpload:`Rilascia per caricare`,orClickToBrowse:`oppure clicca per sfogliare`,allFileTypesSupported:`Tutti i tipi di file supportati. I file ZIP saranno estratti.`,zipFilesDetected:`File ZIP rilevati`,zipExtractOptions:`I file ZIP saranno estratti. Scegli come gestire la struttura cartelle:`,preserveZipStructure:`Mantieni struttura cartelle dal ZIP`,createFolderFromZip:`Crea cartella dal nome ZIP`,stlThumbnailGeneration:`Generazione miniature STL`,zipMayContainStl:`I file ZIP possono contenere STL. Le miniature possono essere generate durante l'estrazione.`,thumbnailsCanBeGenerated:`Le miniature possono essere generate per file STL. I modelli grandi possono richiedere più tempo.`,generateThumbnailsForStl:`Genera miniature per file STL`,threemfDetected:`File 3MF rilevati`,threemfExtractionInfo:`Modello stampante, materiale, colore e impostazioni stampa saranno estratti automaticamente dai file 3MF.`,willBeExtracted:`Sara estratto`,filesExtracted:`{{count}} file estratti`,uploadComplete:`Caricamento completato: {{succeeded}} riusciti`,uploadFailed:`Caricamento fallito`,zipFilesFailed:`{{count}} file falliti`,uploading:`Caricamento...`,changeLink:`Cambia collegamento...`,linkTo:`Collega a...`,linkToProjectOrArchive:`Collega a progetto o archivio`,generateThumbnail:`Genera miniatura`,generateThumbnails:`Genera miniature`,generateThumbnailsForMissing:`Genera miniature per STL senza miniatura`,gridView:`Vista griglia`,listView:`Vista elenco`,lowDiskSpaceWarning:`Avviso spazio disco basso`,lowDiskSpaceDetails:`Solo {{free}} liberi su {{total}} totali. La soglia e {{threshold}} GB nelle impostazioni.`,files:`File`,folders:`Cartelle`,size:`Dimensione`,free:`Libero`,allFiles:`Tutti i file`,allExternal:`Esterni`,externalIsEmpty:`Nessun file esterno`,externalEmptyDescription:`I file delle tue cartelle esterne collegate appariranno qui.`,wrap:`A capo`,enableTextWrapping:`Abilita a capo testo`,disableTextWrapping:`Disabilita a capo testo`,collapse:`Comprimi`,collapseFoldersByDefault:`Comprimi le cartelle per impostazione predefinita`,expandFoldersByDefault:`Espandi le cartelle per impostazione predefinita`,folderSort:`Ordina cartelle`,folderSortByName:`Per nome`,folderSortByActivity:`Per attività recente`,dragToResizeTooltip:`Trascina per ridimensionare, doppio clic per reset`,searchFiles:`Cerca file...`,searchSubfoldersHint:`Sottocartelle incluse`,readme:{truncated:`Troncato`,show:`Mostra README`,hide:`Nascondi README`,label:`README`},tags:{title:`Etichette`,subtitle:`Etichetta i file per filtri trasversali — giocattoli, sicuri per bambini, solo PETG, qualunque cosa serva.`,manage:`Etichette`,manageTitle:`Gestisci il catalogo delle etichette`,add:`Nuova etichetta`,edit:`Rinomina etichetta`,name:`Nome`,fileCount:`File`,empty:`Nessuna etichetta. Creane una per iniziare.`,noMatches:`Nessuna etichetta corrispondente.`,createPlaceholder:`es. giocattoli, sicuro-bimbi, petg`,createButton:`Crea`,nameRequired:`Il nome è obbligatorio.`,searchPlaceholder:`Filtra etichette...`,created:`Etichetta creata.`,updated:`Etichetta rinominata.`,deleted:`Etichetta rimossa.`,saveFailed:`Impossibile salvare l'etichetta.`,deleteFailed:`Impossibile rimuovere l'etichetta.`,applyFailed:`Impossibile applicare le etichette.`,applyAdd:`Aggiungi etichette`,applyRemove:`Rimuovi etichette`,applyAddSuccess:`Aggiunte {{count}} etichetta/e su {{files}} file.`,applyRemoveSuccess:`Rimosse {{count}} etichetta/e da {{files}} file.`,actionAdd:`Aggiungi ai file selezionati`,actionRemove:`Rimuovi dai file selezionati`,tagAction:`Etichetta`,bulkTitle:`Etichetta {{count}} file selezionato/i`,bulkTooltip:`Aggiungi o rimuovi etichette su ogni file selezionato.`,noPermission:`Non hai il permesso per etichettare i file.`,filterLabel:`Filtraggio per:`,clearAll:`Pulisci tutto`,confirmDelete:`Eliminare l'etichetta "{{name}}"?`,confirmDeleteMessage:`Rimuove l'etichetta dal catalogo. I file mantengono le altre etichette.`,confirmDeleteInUseMessage:`Questa etichetta è su {{count}} file. L'eliminazione la rimuove da tutti; i file non vengono toccati.`,editAria:`Modifica {{name}}`,deleteAria:`Elimina {{name}}`},allTypes:`Tutti i tipi`,prints:`Stampe`,ascending:`Crescente`,descending:`Decrescente`,showModified:`Mostra date di modifica`,hideModified:`Nascondi date di modifica`,lastModified:`Ultima modifica`,lastActivity:`Ultima attività`,resultsCount:`{{showing}} di {{total}} file`,selectAll:`Seleziona tutto`,deselectAll:`Deseleziona tutto`,selected:`{{count}} selezionati`,adding:`Aggiunta...`,loadingFiles:`Caricamento file...`,folderIsEmpty:`La cartella e vuota`,noFilesYet:`Nessun file ancora`,folderEmptyDescription:`Carica file o sposta file in questa cartella per iniziare.`,noFilesDescription:`Carica file per iniziare a organizzare i file di stampa.`,noMatchingFiles:`Nessun file corrispondente`,noMatchingFilesDescription:`Nessun file corrisponde ai criteri di ricerca o filtro.`,clearFilters:`Pulisci filtri`,printedCount:`Stampato {{count}}x`,uploadedBy:`Caricato da`,deleteFolder:`Elimina cartella`,deleteFile:`Elimina file`,deleteFilesCount:`Elimina {{count}} file`,deleteFolderConfirm:`Sei sicuro di voler eliminare questa cartella? Tutti i file dentro saranno eliminati.`,deleteFileConfirm:`Sei sicuro di voler eliminare questo file?`,deleteFilesConfirm:`Sei sicuro di voler eliminare {{count}} file selezionati? Questa azione non può essere annullata.`,deleting:`Eliminazione...`,noPermissionRenameFolder:`Non hai il permesso di rinominare cartelle`,noPermissionLinkFolder:`Non hai il permesso di collegare cartelle`,noPermissionDeleteFolder:`Non hai il permesso di eliminare cartelle`,onlyEmptyFoldersDeletable:`Puoi eliminare solo cartelle vuote`,noPermissionPrint:`Non hai il permesso di stampare`,noPermissionSlice:`Non hai il permesso di sezionare i file`,noPermissionAddToQueue:`Non hai il permesso di aggiungere alla coda`,noPermissionDownload:`Non hai il permesso di scaricare file`,noPermissionPreview:`Non hai il permesso di visualizzare l'anteprima dei file`,preview3d:`Anteprima 3D`,noPermissionRenameFile:`Non hai il permesso di rinominare questo file`,noPermissionGenerateThumbnail:`Non hai il permesso di generare miniature`,noPermissionDeleteFile:`Non hai il permesso di eliminare questo file`,noPermissionCreateFolder:`Non hai il permesso di creare cartelle`,noPermissionUpload:`Non hai il permesso di caricare file`,noPermissionMoveFiles:`Non hai il permesso di spostare file`,noPermissionDeleteFiles:`Non hai il permesso di eliminare file`,linkExternal:`Collega esterno`,linkExternalFolder:`Collega cartella esterna`,linkExternalFolderDescription:`Monta una directory host (NAS, USB, condivisione di rete) nel File Manager. I file non vengono copiati — vengono letti direttamente dal percorso originale.`,externalFolderNamePlaceholder:`es. Stampe NAS`,externalPath:`Percorso host`,externalPathHelp:`Percorso assoluto della directory sull'host Docker. Deve essere montato come bind nel container.`,readOnly:`Sola lettura`,readOnlyHelp:`impedisce caricamenti e cancellazioni`,showHiddenFiles:`Mostra file nascosti (file punto)`,externalFolder:`Cartella esterna`,scanFolder:`Scansiona`,toast:{folderCreated:`Cartella creata`,openInSlicerFailed:`Impossibile aprire nello slicer`,folderDeleted:`Cartella eliminata`,fileDeleted:`File eliminato`,filesDeleted:`Eliminati {{count}} file`,filesMoved:`File spostati`,folderLinked:`Cartella collegata`,folderUnlinked:`Cartella scollegata`,externalFolderLinked:`Cartella esterna collegata e scansionata`,folderScanned:`Scansione completata: {{added}} aggiunti, {{removed}} rimossi`,addedToQueue:`Aggiunti {{count}} file alla coda`,addedToQueuePartial:`Aggiunti {{added}} file, {{failed}} falliti`,failedToAddToQueue:`Aggiunta file fallita: {{error}}`,fileRenamed:`File rinominato`,folderRenamed:`Cartella rinominata`,thumbnailsGenerated:`Generate {{count}} miniature`,thumbnailsGeneratedPartial:`Generate {{succeeded}} miniature, {{failed}} fallite`,noStlMissingThumbnails:`Nessun file STL senza miniature`,failedToGenerateThumbnails:`Generazione miniature fallita: {{error}}`,thumbnailGenerated:`Miniatura generata`,failedToGenerateThumbnail:`Generazione miniatura fallita: {{error}}`}},projects:{parentLabel:`Progetto principale`,parentNone:`Nessuno (progetto di primo livello)`,parentHint:`Annida questo progetto in un altro perché i suoi numeri confluiscano in un progetto principale`,partOf:`Parte di {{name}}`,subProjectCount:`{{count}} sotto-progetti`,subProjectsOf:`Sotto-progetti di {{name}}`,collapseSubProjects:`Comprimi sotto-progetti`,expandSubProjects:`Espandi sotto-progetti`,title:`Progetti`,subtitle:`Organizza e traccia i tuoi progetti di stampa 3D`,newProject:`Nuovo progetto`,editProject:`Modifica progetto`,deleteProject:`Elimina progetto`,projectName:`Nome progetto`,description:`Descrizione`,noProjects:`Nessun progetto ancora`,noProjectsFiltered:`Nessun progetto {{status}}`,noProjectsFilteredHelp:`Non hai progetti {{status}}. I progetti appariranno qui quando il loro stato cambia.`,createFirst:`Crea il tuo primo progetto per organizzare stampe correlate, tracciare progressi e gestire i tuoi build.`,createFirstButton:`Crea il tuo primo progetto`,create:`Crea`,files:`File`,prints:`Stampe`,plates:`piatti`,parts:`parti`,lastModified:`Ultima modifica`,deleteConfirm:`Sei sicuro di voler eliminare questo progetto? Archivi e elementi in coda saranno scollegati ma non eliminati.`,addFiles:`Aggiungi file`,removeFile:`Rimuovi file`,viewDetails:`Vedi dettagli`,namePlaceholder:`es., Build Voron 2.4`,descriptionPlaceholder:`Descrizione opzionale...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`L'URL deve iniziare con http:// o https://`,openExternalUrl:`Apri URL del progetto`,coverImageLabel:`Immagine di copertina`,coverImageAlt:`Immagine di copertina del progetto`,coverImageUpload:`Carica`,coverImageReplace:`Sostituisci`,coverImageRemove:`Rimuovi`,color:`Colore`,targetPlates:`Piatti target`,targetPlatesPlaceholder:`es., 25`,targetPlatesHelp:`Numero di job di stampa`,targetParts:`Parti target`,targetPartsPlaceholder:`es., 150`,targetPartsHelp:`Totale oggetti necessari`,targetSets:`Copie per file`,targetSetsPlaceholder:`es. 10`,targetSetsHelp:`Quante volte stampare ogni file stampabile`,tagsLabel:`Tag (separati da virgola)`,tagsPlaceholder:`es., voron, funzionale, regalo`,dueDate:`Data scadenza`,priority:`Priorita`,priorityLow:`Bassa`,priorityNormal:`Normale`,priorityHigh:`Alta`,priorityUrgent:`Urgente`,statusActive:`Attivo`,statusCompleted:`Completato`,statusArchived:`Archiviato`,done:`Fatto`,completed:`completato`,failed:`fallito`,inQueue:`in coda`,noPrintsYet:`Nessuna stampa ancora`,printJobs:`Job di stampa (piatti)`,partsPrinted:`Parti stampate`,failedParts:`Parti fallite`,import:`Importa`,export:`Esporta`,importProject:`Importa progetto`,exportAll:`Esporta tutti i progetti`,loading:`Caricamento progetti...`,noEditPermission:`Non hai il permesso di modificare progetti`,noDeletePermission:`Non hai il permesso di eliminare progetti`,noCreatePermission:`Non hai il permesso di creare progetti`,noImportPermission:`Non hai il permesso di importare progetti`,noExportPermission:`Non hai il permesso di esportare progetti`,toast:{created:`Progetto creato`,updated:`Progetto aggiornato`,deleted:`Progetto eliminato`,imported:`Progetto importato`,multipleImported:`{{count}} progetti importati`,importFailed:`Import fallito`,exported:`Progetti esportati (solo metadati)`}},projectDetail:{notFound:`Progetto non trovato`,backToProjects:`Torna a Progetti`,export:`Esporta`,exportProject:`Esporta progetto`,noExportPermission:`Non hai il permesso di esportare progetti`,noEditPermission:`Non hai il permesso di modificare progetti`,partOf:`Parte di:`,priorityLabel:`Priorita:`,noPrints:`Nessuna stampa in questo progetto ancora`,status:{active:`Attivo`,completed:`Completato`,archived:`Archiviato`},priority:{low:`Bassa`,normal:`Normale`,high:`Alta`,urgent:`Urgente`},dueDate:{overdue:`Scaduto`,today:`Scade oggi`,daysLeft:`{{count}} giorni rimanenti`},progress:{platesProgress:`Avanzamento piatti`,partsProgress:`Avanzamento parti`,setsProgress:`Set completi`,sets:`set`,setsHint:`Un set è completo quando ogni file stampabile raggiunge questo numero`,printJobs:`job di stampa`,parts:`parti`,percentComplete:`{{percent}}% completato`,remaining:`{{count}} rimanenti`},stats:{printJobs:`Job di stampa`,total:`totale`,failed:`{{count}} falliti`,partsPrinted:`{{count}} parti stampate`,printTime:`Tempo di stampa`,filamentUsed:`Filamento usato`},cost:{title:`Tracciamento costi`,filamentCost:`Costo filamento`,energy:`Energia`,totalCost:`Costo totale`,total:`Totale`,includesBom:`incl. distinta materiali`,budget:`Budget`,remaining:`Rimanente`},subProjects:{title:`Sotto-progetti ({{count}})`,jobs:`{{count}} lavori`},rollup:{title:`Inclusi {{count}} sotto-progetti`,progress:`Avanzamento complessivo`,percentComplete:`{{percent}}% completato`},notes:{title:`Note`,noEditPermission:`Non hai il permesso di modificare le note`,placeholder:`Aggiungi note su questo progetto...`,empty:`Nessuna nota ancora. Clicca Modifica per aggiungere note.`},files:{title:`File`,linkFolders:`Collega cartelle dal Gestore file`,forQuickAccess:`a questo progetto per accesso rapido.`,fileCount:`{{count}} file`,empty:`Nessuna cartella collegata. Vai a Gestore file e collega una cartella a questo progetto.`,printedCount:`Stampato {{count}} volte`,progressTooltip:`{{done}} di {{target}} stampe completate`,noFiles:`Nessun file in questa cartella.`},bom:{title:`Distinta materiali`,acquired:`{{completed}}/{{total}} acquisiti`,showAll:`Mostra tutti`,hideDone:`Nascondi completati`,addPart:`Aggiungi parte`,noAddPermission:`Non hai il permesso di aggiungere parti`,partNamePlaceholder:`Nome parte (es., viti M3x8)`,partName:`Nome parte`,qty:`Qta`,price:`Prezzo ({{currency}})`,sourcingUrlPlaceholder:`URL fornitura (opzionale)`,remarksPlaceholder:`Note (opzionale)`,deletePart:`Elimina parte`,deleteConfirm:`Sei sicuro di voler eliminare "{{name}}"?`,noUpdatePermission:`Non hai il permesso di aggiornare parti`,noEditPermission:`Non hai il permesso di modificare parti`,noDeletePermission:`Non hai il permesso di eliminare parti`,totalCost:`Costo totale:`,empty:`Nessuna parte nella distinta materiali. Aggiungi hardware, elettronica o altri componenti da reperire.`},timeline:{title:`Timeline attivita`,empty:`Nessuna attivita ancora.`},template:{saveAsTemplate:`Salva come template`,noCreatePermission:`Non hai il permesso di creare template`},queue:{title:`Coda`,viewAll:`Vedi tutto`,printing:`{{count}} in stampa`,queued:`{{count}} in coda`},prints:{title:`Stampe ({{count}})`},toast:{projectUpdated:`Progetto aggiornato`,partAdded:`Parte aggiunta`,partRemoved:`Parte rimossa`,exportFailed:`Export fallito`,projectExported:`Progetto esportato`,templateCreated:`Template creato`}},system:{title:`Informazioni sistema`,version:`Versione`,uptime:`Tempo attivo`,cpuUsage:`Uso CPU`,memoryUsage:`Uso memoria`,diskUsage:`Uso disco`,networkInfo:`Info rete`,logs:`Log`,debugMode:`Modalita debug`,enableDebug:`Abilita log debug`,disableDebug:`Disabilita log debug`,downloadLogs:`Scarica log`,clearLogs:`Cancella log`,dockerInfo:`Info Docker`,containerName:`Nome container`,imageName:`Nome immagine`,platform:`Piattaforma`,architecture:`Architettura`},sponsors:{sectionTitle:`Indipendente e finanziato dalla community`,tagline:`Bambuddy è gratuito e resta tale perché qualcuno sceglie di sostenerlo. Niente VC, niente lock-in cloud.`,viewSupporters:`Vedi i sostenitori`,toastPrints:`Hai completato {{count}} stampe con Bambuddy. Bambuddy resta gratuito grazie a chi lo sostiene.`,toastCost:`Hai monitorato {{total}} di filamento con Bambuddy. Scopri chi mantiene il progetto indipendente.`,toastArchives:`{{count}} stampe archiviate con Bambuddy. Scopri chi lo mantiene indipendente.`,toastAnniversary:`Un anno con Bambuddy! Scopri chi mantiene il progetto indipendente.`,toastVersionUpdate:`Aggiornato a v{{version}}. Bambuddy resta gratuito grazie a chi lo sostiene.`,toastBusiness:`Usi Bambuddy su {{count}} stampanti? Esiste un piano di supporto per i team: correzioni prioritarie, fatturazione e un contatto diretto con il manutentore.`,businessCta:`Bambuddy per le aziende`,businessTitle:`Bambuddy per le aziende`,businessTagline:`Stai gestendo {{count}} stampanti. Supporto prioritario, licenze commerciali e fatturazione sono disponibili per team e farm di stampa.`},library:{title:`Libreria filamenti`,addFilament:`Aggiungi filamento`,editFilament:`Modifica filamento`,deleteFilament:`Elimina filamento`,vendor:`Produttore`,material:`Materiale`,color:`Colore`,kFactor:`Fattore K`,temperature:`Temperatura`,noFilaments:`Nessun filamento in libreria`,deleteConfirm:`Sei sicuro di voler eliminare questo filamento?`,importFromPrinter:`Importa da stampante`,exportToFile:`Esporta su file`,runWithPipeline:{actionLabel:`Esegui con pipeline`,noPermission:`Non hai il permesso di eseguire pipeline`,modalTitle:`Esegui con pipeline`,confirmTitle:`Conferma esecuzione`,confirmIntro:`Il pre-volo ha trovato problemi con questa esecuzione`,sourceHint:`Sorgente`,pipelineHint:`Pipeline`,targetHint:`Destinazione`,pipelineListAria:`Pipeline disponibili`,runAnyway:`Esegui comunque`,loading:`Caricamento…`,empty:`Nessuna pipeline salvata. Apri il dialogo Slice e fai clic su "Salva come pipeline" per crearne una.`,noTarget:`Nessuna stampante di destinazione`,noTargetMessage:`Questa pipeline non ha una stampante di destinazione. Aprila nelle Impostazioni per sceglierne una.`,copies:`Copie`,copiesHint:`max {{n}}`,classTarget:`Qualsiasi {{model}}`,toast:{started:`Esecuzione della pipeline avviata`,failed:`Impossibile avviare l'esecuzione`},issue:{printerNotSet:`Nessuna stampante di destinazione su questa pipeline.`,printerNotFound:`La stampante di destinazione non esiste più.`,printerDisabled:`La stampante di destinazione è disabilitata.`,printerOffline:`La stampante di destinazione è offline.`,filamentType:`Slot filamento {{slot}}: atteso {{expected}}, AMS ha {{actual}}`,filamentColor:`Slot filamento {{slot}}: colore differente (atteso {{expected}}, AMS ha {{actual}})`,amsSlotMissing:`Slot AMS {{slot}} non disponibile su questa stampante`,filamentUnverified:`Lo slot filamento {{slot}} proviene da un preset cloud / standard e non può essere verificato staticamente.`,noClassMatches:`Nessuna stampante in questa installazione corrisponde alla classe di modello target della pipeline ({{expected}}).`,classNotSet:`La destinazione della pipeline è una classe di stampante ma nessun modello è stato scelto.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Sono mostrati i valori predefiniti dello slicer: il tuo sidecar è più vecchio di questa funzione e non può fornire i valori di un profilo. Aggiorna l'immagine del sidecar per vederli. Tutto ciò che non modifichi continua a usare il profilo.`,presetValuesNotConfigured:`Sono mostrati i valori predefiniti dello slicer: nessun sidecar è configurato, quindi i valori di un profilo non sono leggibili. Tutto ciò che non modifichi continua a usare il profilo.`,presetValuesSidecarUnavailable:`Sono mostrati i valori predefiniti dello slicer: il sidecar non ha risposto, quindi i valori di un profilo non sono leggibili. Tutto ciò che non modifichi continua a usare il profilo.`,presetValuesUnavailable:`Sono mostrati i valori predefiniti dello slicer: quelli del profilo scelto non sono leggibili. Tutto ciò che non modifichi continua a usare il profilo.`,filamentDefault:`Predefinito`,fromFile:`dal file`,fromFileHint:`Il designer ha modificato questo parametro nel file di origine. Il valore è {{value}}.`,fromFilePrinterCoupled:`stampante del designer`,fromFilePrinterCoupledHint:`Tarato per la stampante per cui è stato progettato questo file: sulla tua può essere errato o fuori intervallo.`,fromFileOverridesPreset:`sovrascrive il profilo`,fromFileOverridesPresetHint:`Il file imposta {{value}} mentre il profilo scelto usa {{preset}}. Selezionalo solo se deve prevalere il file.`,useFromFile:`Usa il valore del file di origine per {{option}}`,otherFromFile:`Altre impostazioni da questo file`,fromFileSummary:`Il progettista ha modificato {{count}} impostazioni di processo in questo file. Vengono usate solo quelle che spunti.`,fromFileUseAll:`Usa le impostazioni del progettista`,fromFileUseAllHint:`Spunta le impostazioni che si trasferiscono ad altre stampanti. Quelle tarate sulla stampante del progettista, e quelle che definiscono il preset scelto, restano disattivate.`,fromFileClear:`Azzera {{count}}`,loading:`Caricamento impostazioni dello slicer…`,mode:{simple:`Semplice`,advanced:`Avanzato`,expert:`Esperto`},searchPlaceholder:`Cerca impostazioni`,resetAll:`Ripristina {{count}}`,resetOption:`Ripristina il valore predefinito`,noMatches:`Nessuna impostazione corrisponde a questa ricerca.`},slice:{filamentSlotUnset:`non impostato`,processSettingsEmbedded:`Non utilizzato finché «Usa le impostazioni integrate del file» è attivo: sono le impostazioni del file a guidare questo slice.`,processSettingsInactive:`Non attivo`,presetsHidden:`{{count}} nascosti`,showAllPresets:`Mostra tutti`,showFewerPresets:`Mostra meno`,processSettings:`Impostazioni di processo`,processSettingsHint:`Regola il profilo scelto per questo slice. Tutto ciò che non tocchi resta come definito dal profilo.`,processSettingsChanged:`{{count}} modificate`,processSettingsUnchanged:`Valori del profilo`,title:`Slicing modello`,action:`Slice`,actionAll:`Slicia tutti i {{count}} piatti`,actionAllTitle:`Slicia tutti i piatti in un unico output multi-piatto (un solo archivio). La selezione del filamento copre ogni slot definito dal progetto.`,allPlatesToggle:`Slicia tutti i {{count}} piatti`,slicing:`Slicing…`,printer:`Profilo stampante`,process:`Profilo processo`,filament:`Profilo filamento`,filamentSlot:`Filamento {{index}} ({{type}})`,filamentColour:`Colore del filamento`,selectPreset:`— Seleziona un preset —`,loadingPresets:`Caricamento preset…`,analyzingPlateFilaments:`Analisi filamenti del piano…`,analyzingPlateFilamentsHint:`Slicing di anteprima per scoprire quali slot AMS usa questo piano. In cache dopo — la riapertura è istantanea.`,previewToast:`Analisi di {{name}} – {{elapsed}}`,previewWithProgress:`Analisi di {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,notUsedByPlate:`— non usato da questo piano`,noPresetsForSlot:`Nessun preset disponibile`,otherPrinters:`Altre stampanti`,presetsLoadFailed:`Caricamento preset fallito. Apri Impostazioni → Profili per importarli prima.`,refreshPresets:`Aggiorna`,refreshPresetsTitle:`Aggiorna i preset — recupera gli elenchi più recenti dal cloud e dai bundle (da usare dopo aver eliminato un preset in Bambu Studio o Bambu Handy)`,allPresetsRequired:`Tutti i preset devono essere selezionati`,useEmbedded:`Usa le impostazioni integrate del file`,useEmbeddedHint:`Slicia come impostato dal designer (pareti, riempimento, filamento) invece dei profili sopra. Disponibile perché la tua stampante corrisponde a quella del file.`,autoOrient:`Orienta automaticamente gli oggetti`,autoOrientHint:`Lo slicer ruota ogni oggetto sul lato che si stampa meglio prima di affettare. Sostituisce l'orientamento salvato nel file.`,autoArrange:`Disponi automaticamente sul piatto`,autoArrangeHint:`Lo slicer dispone gli oggetti in modo che non si sovrappongano più. Sostituisce la disposizione del file.`,enqueuing:`Invio lavoro di slicing…`,queued:`In coda…`,failed:`Slicing fallito. Controlla i log del sidecar.`,startedToast:`Slicing di {{name}} in background…`,queuedToast:`In coda: {{name}} – {{elapsed}}`,runningToast:`Slicing {{name}} – {{elapsed}}`,runningWithProgress:`{{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,runningWithProgressMultiPlate:`Piatto {{plateIndex}} di {{plateCount}} • {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,completedToast:`{{name}} sezionato`,externalWriteFallbackToast:`Salvato nella libreria interna: impossibile scrivere nella cartella esterna`,failedTitle:`Slicing fallito`,failedToast:`Slicing di {{name}} fallito: {{detail}}`,tier:{local:`Importato`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Standard`},cloud:{notAuthenticated:`Accedi a Bambu Cloud (Impostazioni → Profili → Bambu Cloud) per vedere i preset cloud.`,expired:`Sessione Bambu Cloud scaduta – accedi di nuovo per aggiornare i preset cloud.`,unreachable:`Bambu Cloud non è raggiungibile. I preset locali e standard funzionano ancora.`},orcaCloud:{notAuthenticated:`Accedi a Orca Cloud (Profili → Orca Cloud) per vedere i tuoi preset Orca.`,expired:`Sessione Orca Cloud scaduta — accedi di nuovo per aggiornare i tuoi preset Orca.`,unreachable:`Orca Cloud non è raggiungibile in questo momento. Gli altri preset continuano a funzionare.`},bedType:{label:`Piano di stampa`,auto:`Auto (usa preset di processo)`,coolPlate:`Cool Plate`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`},pipelines:{label:`Pipeline`,applyAria:`Applica pipeline`,applyPrompt:`Applica pipeline…`,empty:`Nessuna pipeline salvata`,saveButton:`Salva come pipeline`,saveTitle:`Salva la selezione corrente di tutti e quattro gli slot come pipeline riutilizzabile`,namePlaceholder:`Nome pipeline`,nameAria:`Nome nuova pipeline`,toast:{applied:`"{{name}}" applicata`,saved:`Pipeline salvata`,saveFailed:`Salvataggio non riuscito`}}},spoolman:{title:`Integrazione Spoolman`,enabled:`Spoolman abilitato`,url:`URL Spoolman`,connected:`Connesso`,disconnected:`Non connesso`,testConnection:`Testa connessione`,sync:`Sincronizza`,syncing:`Sincronizzazione...`,lastSync:`Ultima sincronizzazione`,linkToSpoolman:`Collega a Spoolman`,openInSpoolman:`Apri in Spoolman`,unlinkSpool:`Scollega bobina`,unlinkConfirmTitle:`Rimuovere bobina?`,unlinkConfirmMessage:`Questo rimuoverà la bobina da questo slot. I dati della bobina stessa rimarranno invariati.`,selectSpool:`Seleziona bobina`,noUnlinkedSpools:`Nessuna bobina disponibile`,linkSuccess:`Bobina assegnata con successo`,linkFailed:`Impossibile assegnare la bobina`,unlinkSuccess:`Bobina rimossa con successo`,unlinkFailed:`Impossibile rimuovere la bobina`,linkedSpool:`Bobina assegnata`,spoolId:`ID bobina`,fillSourceLabel:`(Spoolman)`,weight:`Peso`,remaining:`Rimanente`,disableWeightSync:`Disabilita sync peso stimato AMS`,disableWeightSyncDesc:`Non aggiornare la capacità rimanente dalle stime AMS. Usalo se preferisci il tracciamento di Spoolman rispetto alle stime AMS. Le nuove bobine useranno comunque la stima AMS come peso iniziale.`,reportPartialUsage:`Segnala uso parziale per stampe fallite`,reportPartialUsageDesc:`Quando una stampa fallisce o viene annullata, segnala il filamento stimato usato fino a quel punto in base all'avanzamento layer.`},locations:{title:`Ubicazioni di stoccaggio`,subtitle:`Gestisci scaffali, cassetti e altri posti fisici per le bobine`,add:`Aggiungi ubicazione`,addShort:`Aggiungi`,edit:`Modifica ubicazione`,name:`Nome`,spools:`Bobine`,sensors:`Sensori`,empty:`Nessuna ubicazione di stoccaggio. Crea il tuo primo scaffale o cassetto.`,manage:`Ubicazioni`,createPlaceholder:`es. Scaffale A, Cassetto 1`,nameRequired:`Il nome dell'ubicazione è obbligatorio`,created:`Ubicazione creata`,updated:`Ubicazione aggiornata`,deleted:`Ubicazione eliminata`,saveFailed:`Impossibile salvare l'ubicazione`,deleteFailed:`Impossibile eliminare l'ubicazione`,deleteBlocked:`Rimuovi prima tutte le bobine da questa ubicazione`,confirmDelete:`Eliminare «{{name}}»?`,confirmDeleteMessage:`Questa ubicazione verrà rimossa dal catalogo. Sposta prima le bobine.`,confirmDeleteMessageWithSensors:`Questa ubicazione verrà rimossa dal catalogo. Sposta prima le bobine. Verranno eliminati anche i sensori collegati.`},inventory:{title:`Inventario Bobine`,subtitle:`Gestisci le tue bobine`,addToInventory:`Aggiungi all'inventario`,addToInventoryPending:`Aggiunta in corso...`,addToInventorySuccess:`Bobina aggiunta all'inventario`,addToInventoryFailed:`Aggiunta della bobina all'inventario non riuscita`,unknownSpoolTitle:`Nuovo filamento rilevato`,unknownSpoolMessage:`È stata rilevata una bobina con tag RFID sconosciuto in {{location}}. Aggiungerla all'inventario ora?`,unknownSpoolSlot:`Slot`,bulk:{selectAllVisible:`Seleziona tutto il visibile`,selectRow:`Seleziona riga`,selectGroup:`Seleziona gruppo`,selectionCount:`{{count}} selezionate`,edit:`Modifica`,printLabels:`Stampa etichette`,resetUsage:`Reimposta utilizzo`,restore:`Ripristina`,archive:`Archivia`,delete:`Elimina`,clearSelection:`Cancella selezione`,editTitle:`Modifica bobine in blocco`,editSubtitle:`Si applica a {{count}} bobine selezionate. Vengono aggiornati solo i campi spuntati.`,editHint:`Digita in un campo per contrassegnarlo per l'aggiornamento — vengono inviate solo le righe spuntate. Un campo vuoto lascia le bobine invariate (svuotare un campo si fa per singola bobina).`,useCustom:`Usa "{{value}}"`,toggleField:`Attiva l'aggiornamento per questo campo`,changeCount:`{{count}} campi verranno aggiornati.`,applyPending:`Applicazione in corso...`,applyButton:`Applica a {{count}} bobine`,deleteTitle:`Elimina bobine selezionate`,archiveTitle:`Archivia bobine selezionate`,restoreTitle:`Ripristina bobine selezionate`,resetUsageTitle:`Reimposta utilizzo delle bobine selezionate`,deleteMessage:`Eliminare definitivamente {{count}} bobine? L'operazione non può essere annullata.`,archiveMessage:`Archiviare {{count}} bobine? Possono essere ripristinate in seguito.`,restoreMessage:`Ripristinare {{count}} bobine archiviate?`,resetUsageMessage:`Reimpostare il contatore "Totale consumato" su {{count}} bobine? Il peso rimanente viene preservato.`,updateSuccess:`{{count}} bobine aggiornate`,updateFailed:`Aggiornamento in blocco fallito`,updatePartial:`{{ok}} bobine aggiornate, {{failed}} fallite`,updateAllFailed:`Tutti i {{count}} aggiornamenti sono falliti — la selezione viene mantenuta per riprovare`,deleteSuccess:`{{count}} bobine eliminate`,deleteFailed:`Eliminazione in blocco fallita`,deletePartial:`{{ok}} bobine eliminate, {{failed}} fallite`,deleteAllFailed:`Tutte le {{count}} eliminazioni sono fallite — la selezione viene mantenuta per riprovare`,archiveSuccess:`{{count}} bobine archiviate`,archiveFailed:`Archiviazione in blocco fallita`,archivePartial:`{{ok}} bobine archiviate, {{failed}} fallite`,archiveAllFailed:`Tutte le {{count}} archiviazioni sono fallite — la selezione viene mantenuta per riprovare`,restoreSuccess:`{{count}} bobine ripristinate`,restoreFailed:`Ripristino in blocco fallito`,restorePartial:`{{ok}} bobine ripristinate, {{failed}} fallite`,restoreAllFailed:`Tutti i {{count}} ripristini sono falliti — la selezione viene mantenuta per riprovare`,invalidHex:`Inserisci 6 caratteri esadecimali (RRGGBB) o 8 (RRGGBBAA). Altrimenti il campo non verrà applicato.`},spoolmanMixedContentTitle:`Spoolman non può essere caricato tramite HTTPS — contenuto misto bloccato dal browser`,spoolmanMixedContentBody:`Bambuddy viene servito tramite HTTPS (dietro il tuo reverse proxy), ma l'URL di Spoolman è ancora HTTP. I browser bloccano il contenuto misto per motivi di sicurezza, quindi l'interfaccia Spoolman incorporata non può essere visualizzata. Anche Spoolman deve essere raggiungibile via HTTPS.`,spoolmanMixedContentFixReverseProxy:`Metti Spoolman dietro lo stesso reverse proxy di Bambuddy (Traefik / Nginx / Caddy) in HTTPS, poi aggiorna l'URL di Spoolman nelle Impostazioni con il nuovo indirizzo HTTPS.`,spoolmanMixedContentFixOpenNewTab:`Come alternativa, apri Spoolman in una nuova scheda via HTTP — le regole sul contenuto misto si applicano solo ai frame incorporati, una scheda autonoma funziona.`,spoolmanOpenInNewTab:`Apri Spoolman in una nuova scheda`,labels:{title:`Stampa etichette bobine`,selectedCount:`{{count}} selezionato`,pickSpools:`Scegli per quali bobine stampare le etichette:`,monochrome:`Monocromatico (stampante in bianco e nero)`,monochromeHint:`Rimuove il campione di colore e allarga il testo`,startingPosition:`Posizione iniziale dell’etichetta`,startingPositionRange:`Solo modelli a foglio: L7160 supporta 1–21; 5160 supporta 1–30.`,startingPositionInvalid:`Inserisci un numero intero da 1 a {{capacity}}.`,startingPositionFirst:`La stampa inizia dalla posizione 1.`,startingPositionSkipped:`Le posizioni da 1 a {{lastPosition}} resteranno vuote sul primo foglio.`,startingPositionRangeError:`La posizione iniziale deve essere compresa tra 1 e {{capacity}} per questo foglio.`,searchPlaceholder:`Cerca per nome, marca o #ID`,filterByMaterial:`Materiale:`,allMaterials:`Tutto`,selectVisible:`Seleziona tutti visibili ({{count}})`,deselectVisible:`Deseleziona visibili`,clearAll:`Cancella tutto`,noSpoolsToShow:`Nessuna bobina da mostrare. Modifica il filtro e riprova.`,noMatches:`Nessuna bobina corrisponde alla ricerca o al filtro corrente.`,printOne:`Stampa etichetta per questa bobina`,printLabels:`Stampa etichette…`,bulkTitle:`Scegli le bobine da etichettare tra le {{count}} mostrate`,noSpoolsTitle:`Nessuna bobina da etichettare`,error:`Impossibile generare etichette: {{msg}}`,sortBy:{label:`Ordina:`,id:`Per ID`,color:`Per colore`},templates:{amsHolderSmall:{label:`Supporto AMS — piccolo (74 × 33 mm)`,hint:`Un'etichetta per pagina; corrisponde all'etichetta stampabile del modello MakerWorld 752566 (Porta-etichette filamento AMS).`},amsHolderLarge:{label:`Supporto AMS — grande (75 × 55 mm)`,hint:`Un'etichetta per pagina; si adatta alla variante cartoncino del porta-etichette filamento AMS. Spazio sufficiente per campione colore, marca, materiale, ID e codice QR.`},box40x30:{label:`Etichetta scatola (40 × 30 mm)`,hint:`Una etichetta per pagina; misura comune DK/Brother, ideale per etichette di sacchetti filamento e contenitori.`},box:{label:`Box label (62 × 29 mm)`,hint:`Una etichetta per pagina; dimensionata per Brother PT/QL e piccole etichette Dymo.`},averyL7160:{label:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,hint:`Foglio formato UE; 21 etichette per pagina A4.`},avery5160:{label:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,hint:`Foglio formato US; 30 etichette per pagina Letter.`}}},csv:{importButton:`Importa CSV`,exportButton:`Esporta CSV`,modalTitle:`Importa bobine da CSV`,selectFile:`Scegli un file CSV o trascinalo qui`,dragHint:`Intestazione: material (obbligatorio), brand, subtype, color_name, rgba, …`,parsing:`Lettura del file…`,previewError:`Impossibile leggere il file CSV`,validCount:`{{count}} valide`,errorCount:`{{count}} con errore`,skippedCount:`{{count}} ignorate`,colRow:`Riga`,colStatus:`Stato`,colColor:`Colore`,colorResolved:`Colore compilato dal catalogo`,colorCrossMaterial:`Colore preso da un materiale diverso — nessuna corrispondenza esatta nel catalogo`,duplicateExisting:`Esiste già una bobina con questo materiale, marca e colore — verrà comunque importata come nuova bobina`,spoolmanHint:`In modalità Spoolman, usa l'importazione/esportazione CSV integrata di Spoolman.`,importValidRows:`Importa {{count}} righe valide`,noValidRows:`Nessuna riga valida`,importing:`Importazione…`,importSuccess:`{{count}} bobine importate`,importError:`Importazione non riuscita`,exportError:`Esportazione non riuscita`},addSpool:`Aggiungi Bobina`,editSpool:`Modifica Bobina`,copySpool:`Copia Bobina`,material:`Materiale`,selectMaterial:`Seleziona materiale...`,subtype:`Sottotipo`,brand:`Marchio`,searchBrand:`Cerca marchio...`,useCustomBrand:`Usa "{{brand}}"`,useCustomMaterial:`Usa materiale personalizzato: {{material}}`,suggestedOptions:`Suggeriti`,allOptions:`Tutti`,colorName:`Nome Colore`,colorNamePlaceholder:`Bianco Giada, Rosso Fuoco...`,color:`Colore`,hexColor:`Colore Hex`,pickColor:`Scegli colore personalizzato`,labelWeight:`Peso da Etichetta`,coreWeight:`Peso Bobina Vuota`,searchSpoolWeight:`Cerca peso bobina...`,weightUsed:`Utilizzato`,currentWeight:`Peso Rimanente`,measuredWeight:`Peso Misurato`,spoolName:`Bobina`,costPerKg:`Costo per kg`,storageLocation:`Posizione di archiviazione`,temperature:`Temperatura`,humidity:`Umidità`,battery:`Batteria`,storageLocationPlaceholder:`es. Scaffale A, Cassetto 1`,openInInventory:`Apri nell'inventario`,measuredWeightError:`Il peso misurato deve essere compreso tra {{min}}g e {{max}}g.`,slicerFilament:`Filamento Slicer`,slicerFilamentName:`Nome Preset Slicer`,slicerPreset:`Preset Slicer`,searchPresets:`Cerca preset filamento...`,selectedPreset:`Selezionato`,noPresetsFound:`Nessun preset trovato`,tempOverrides:`Override Temperatura`,note:`Nota`,notePlaceholder:`Eventuali note aggiuntive su questa bobina...`,category:`Categoria`,categoryPlaceholder:`es. Produzione, Prototipo, Cliente A`,categoryNone:`Senza categoria`,storageLocationNone:`Nessuna posizione impostata`,lowStockThresholdOverride:`Soglia scorte basse (questa bobina)`,lowStockThresholdOverrideHelp:`Lascia vuoto per usare la soglia globale ({{global}}%).`,clearRfid:`Cancella tag RFID`,rfidCleared:`Tag RFID cancellato`,archive:`Archivia`,restore:`Ripristina`,noSpools:`Ancora nessuna bobina. Aggiungi la tua prima bobina per iniziare.`,noAvailableSpools:`Nessuna bobina disponibile. Aggiungi una bobina al tuo inventario o rimuovine l'assegnazione da un altro slot.`,kProfiles:`Profili K`,addKProfile:`Aggiungi K-Profile`,assignSpool:`Assegna Bobina`,unassignSpool:`Scollega`,assignSuccess:`Bobina assegnata e slot AMS configurato`,assignPendingInsert:`Assegnato. Lo slot verrà configurato all'inserimento della bobina.`,assignFailed:`Assegnazione bobina fallita`,selectSpool:`Seleziona una bobina da assegnare a questo slot`,assigned:`Assegnato`,assigning:`Assegnazione...`,searchSpools:`Cerca bobine...`,showAllSpools:`Mostra tutte le bobine`,spoolmanSpools:`Bobine Spoolman`,allMaterials:`Tutti i Materiali`,filterByBrand:`Filtra per marchio...`,showArchived:`Mostra archiviate`,quickAdd:`Aggiunta rapida (Scorta)`,quantity:`Quantità`,stock:`Scorta`,configured:`Configurata`,spoolsCreated:`{{count}} bobine create`,spoolsPartiallyCreated:`{{created}} di {{total}} bobine create (alcune non riuscite)`,spoolCreated:`Bobina creata`,spoolUpdated:`Bobina aggiornata`,spoolDeleted:`Bobina eliminata`,deepLinkSpoolNotFound:`Bobina non trovata`,deepLinkFetchFailed:`Impossibile caricare la bobina — riprova`,spoolArchived:`Bobina archiviata`,spoolRestored:`Bobina ripristinata`,kProfileSaveFailed:`Impossibile salvare le impostazioni del profilo K`,syncWeightSpoolNotFound:`Bobina non trovata — potrebbe essere stata eliminata`,syncWeightSpoolmanUnreachable:`Spoolman non è raggiungibile — riprovare più tardi`,syncWeightFailed:`Sincronizzazione del peso non riuscita`,spoolmanUnreachable:`Spoolman non è raggiungibile — riprovare più tardi`,deleteSpoolNotFound:`Bobina non trovata — potrebbe essere già stata eliminata`,deleteFailed:`Impossibile eliminare la bobina`,archiveSpoolNotFound:`Bobina non trovata — potrebbe essere già stata eliminata`,archiveFailed:`Impossibile archiviare la bobina`,restoreSpoolNotFound:`Bobina non trovata — potrebbe essere già stata eliminata`,restoreFailed:`Impossibile ripristinare la bobina`,saveFailed:`Impossibile salvare le modifiche`,tagClearFailed:`Impossibile cancellare il tag`,deleteConfirm:`Sei sicuro di voler eliminare questa bobina? Questa azione non può essere annullata.`,archiveConfirm:`Sei sicuro di voler archiviare questa bobina?`,advancedSettings:`Impostazioni Avanzate`,filamentInfoTab:`Info filamento`,paProfileTab:`Profilo PA`,colorAndCostTab:`Colore e costo`,printersTab:`Stampanti`,filamentInfo:`Filamento`,additional:`Aggiuntivo`,loadingPresets:`Caricamento preset cloud...`,cloudConnected:`Cloud connesso`,cloudNotConnected:`Cloud non connesso (valori predefiniti)`,recentColors:`Recenti`,searchColors:`Cerca colori...`,searchResults:`Risultati della ricerca`,allColors:`Tutti i colori`,commonColors:`Colori comuni`,showLess:`Mostra meno`,showAll:`Mostra tutto`,noColorsFound:`Nessun colore corrisponde alla ricerca`,noResults:`Nessun risultato trovato`,extraColorsLabel:`Colori extra`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Incolla da 2 a 8 stop hex, separati da virgole. Visualizzato come sfumatura.`,extraColorsInvalid:`Hex non validi ignorati: {{tokens}}`,colorEffectLabel:`Effetto`,colorEffect:{none:`Nessuno`,sparkle:`Scintillante`,wood:`Legno`,marble:`Marmo`,glow:`Bagliore`,matte:`Opaco`,silk:`Silk`,galaxy:`Galassia`,rainbow:`Arcobaleno`,metal:`Metallo`,translucent:`Traslucido`,gradient:`Sfumatura`,dualColor:`Bicolore`,triColor:`Tricolore`,multicolor:`Multicolore`},selectMaterialFirst:`Selezionare prima un materiale nella scheda Info filamento.`,noPrintersConfigured:`Nessuna stampante configurata. Aggiungi stampanti per usare i profili PA.`,matchingFilter:`Corrispondenti`,anyBrand:`Qualsiasi marca`,anyVariant:`Qualsiasi variante`,autoSelect:`Selezione automatica`,matches:`corrispondenze`,match:`corrispondenza`,noMatches:`Nessuna corrispondenza`,connected:`Connessa`,offline:`Offline`,printerOffline:`La stampante è offline. Connetti per visualizzare i profili di calibrazione.`,noKProfilesMatch:`Nessun profilo K corrisponde al filamento selezionato.`,leftNozzle:`Ugello sinistro`,rightNozzle:`Ugello destro`,profilesSelected:`profili di calibrazione selezionati`,filamentPreset:`Preset del filamento`,presetUseSpoolDefault:`Usa il preset della bobina`,presetInherited:`ereditato`,presetOverride:`personalizzato`,presetNeedsModel:`Questa stampante non ha ancora comunicato il proprio modello, quindi non può avere un preset dedicato.`,autoMatchPresets:`Abbina automaticamente`,autoMatchPresetsHint:`Trova la variante del preset della bobina che nomina ciascun modello`,kProfilesPerPrinter:`Profili K`,kProfileNotSet:`Non impostato`,kProfileFlowMismatch:`Questo profilo è stato misurato con un ugello {{profile}} ma è montato un ugello {{fitted}}, quindi non verrà applicato`,nozzle:`Ugello`,unknownModel:`Modello sconosciuto`,onePrinter:`1 stampante`,nPrinters:`{{n}} stampanti`,filamentPresetsLoadFailed:`Impossibile caricare i preset per modello di questa bobina`,filamentPresetSaveFailed:`Impossibile salvare i preset per modello`,totalInventory:`Inventario totale`,totalConsumed:`Totale consumato`,byMaterial:`Per materiale`,inPrinter:`In stampante`,lowStock:`Scorta bassa`,sinceTracking:`Dall'inizio del tracciamento`,resetConsumedCounter:`Azzera contatore`,resetConsumedCounterTooltip:`Azzera il contatore di grammi consumati per questa bobina. Il peso rimanente non viene modificato.`,resetConsumedCounterConfirm:`Azzerare il contatore di grammi consumati di questa bobina? Le stampe future ripartiranno da zero. La bobina, il calcolo del peso rimanente e le impostazioni non vengono modificati.`,resetAllConsumedCounters:`Azzera tutti i contatori`,resetAllConsumedCountersTooltip:`Azzera il contatore di grammi consumati su ogni bobina. I pesi rimanenti non vengono modificati.`,resetAllConsumedCountersConfirm:`Azzerare il contatore di grammi consumati su tutte le {{count}} bobine (incluse quelle archiviate)? La statistica "Totale Consumato" verrà azzerata e le stampe future ripartiranno da zero. Bobine e pesi rimanenti restano invariati.`,consumedCounterReset:`Contatore azzerato`,allConsumedCountersReset:`Contatore azzerato per {{count}} bobina/e`,resetConsumedCounterFailed:`Impossibile azzerare il contatore`,loadedInAms:`Caricato in AMS/Est`,remaining:`Rimanente`,weightCheck:`Controllo Peso`,lastWeighed:`Ultima pesatura`,neverWeighed:`Mai pesato`,search:`Cerca bobine...`,showing:`Visualizzazione`,to:`a`,of:`di`,show:`Mostra`,spools:`bobine`,spool:`bobina`,page:`Pagina`,noSpoolsMatch:`Nessun risultato trovato`,noSpoolsMatchDesc:`Prova a modificare la ricerca o i filtri per trovare quello che cerchi.`,active:`Attive`,archived:`Archiviate`,all:`Tutte`,used:`Usato`,new:`Nuovo`,clearFilters:`Cancella filtri`,table:`Tabella`,cards:`Schede`,net:`Netto`,groupSimilar:`Raggruppa`,groupedSpools:`{{count}} bobine identiche`,groupedRows:`righe`,columns:`Colonne`,configureColumns:`Configura colonne`,configureColumnsDesc:`Trascina per riordinare le colonne o usa le frecce. Attiva/disattiva la visibilità con l'icona dell'occhio.`,visible:`visibili`,reset:`Ripristina`,cancel:`Annulla`,applyChanges:`Applica modifiche`,moveUp:`Sposta su`,moveDown:`Sposta giù`,hideColumn:`Nascondi colonna`,showColumn:`Mostra colonna`,linkToSpool:`Collega a bobina`,tagLinked:`Tag collegato alla bobina`,tagLinkFailed:`Impossibile collegare il tag`,tagAlreadyLinked:`Tag già collegato alla bobina #{{id}}`,unknownTag:`Tag RFID sconosciuto rilevato`,usageHistory:`Cronologia utilizzo`,noUsageHistory:`Nessun utilizzo registrato`,printName:`Nome stampa`,weightConsumed:`Peso consumato`,clearHistory:`Cancella`,historyCleared:`Cronologia utilizzo cancellata`,fillSourceLabel:`(Inv)`,lowStockThresholdError:`La soglia deve essere tra 0.1 e 99.9`,assignMismatchTitle:`Materiale non corrispondente`,assignMismatchMessage:`Il materiale della bobina selezionata "{{spoolMaterial}}" non corrisponde al materiale del vassoio "{{trayMaterial}}" per {{location}}. Assegnare comunque?`,assignMismatchConfirm:`Assegna comunque`,assignPartialMismatchMessage:`Il materiale della bobina "{{spoolMaterial}}" è simile ma non corrisponde esattamente a "{{trayMaterial}}" in {{location}}. Vuoi procedere?`,assignProfileMismatchMessage:`Il profilo della bobina "{{spoolProfile}}" non corrisponde al profilo del vassoio "{{trayProfile}}" in {{location}}. Vuoi procedere?`,assignReconfigureNote:`Lo slot AMS verrà riconfigurato per utilizzare il profilo della bobina.`,spoolmanFilamentCatalog:`Catalogo filamenti Spoolman`,pickFromSpoolmanCatalog:`Scegli dal catalogo Spoolman…`,spoolmanFilamentSelected:`Filamento selezionato dal catalogo Spoolman`,spoolmanFilamentUnlinked:`Collegamento al catalogo filamenti rimosso`,noSpoolmanFilaments:`Nessun filamento trovato nel catalogo Spoolman`,spoolmanFilamentColorSwatch:`Colore del filamento`,spoolWeightManagedBySpoolman:`Il peso della bobina vuota è gestito per tipo di filamento in Spoolman`,spoolmanCatalogLoadFailed:`Impossibile caricare il catalogo Spoolman`},timelapse:{title:`Timelapse`,create:`Crea timelapse`,download:`Scarica`,delete:`Elimina`,preview:`Anteprima`,frameRate:`Frame rate`,quality:`Qualità`,processing:`Elaborazione...`,noTimelapses:`Nessun timelapse disponibile`},ams:{title:`AMS`,slot:`Slot`,empty:`Vuoto`,emptySlot:`Slot vuoto`,slotEmpty:`Vuoto`,slotUnconfigured:`?`,emptySlotReset:`Nessuna bobina assegnata`,unknown:`Sconosciuto`,humidity:`Umidità`,temperature:`Temperatura`,filamentType:`Tipo filamento`,filamentColor:`Colore`,remaining:`Rimanente`,history:`Cronologia AMS`,noHistory:`Nessuna cronologia disponibile`,configureSlot:`Configura slot`,externalSpool:`Bobina esterna`,profile:`Profilo`,kFactor:`Fattore K`,kFactorShort:`K`,fill:`Livello`,configure:`Configura`,used:`utilizzato`,remainingUnit:`rimanente`},printModal:{variants:{editNote:`Queste alternative sono state definite al momento dell'accodamento. Annulla e riaccoda per modificarle.`,title:`Alternative di stampante`,help:`Un lavoro, un posto in coda. La prima stampante compatibile che si libera stampa il suo file.`,unknownModel:`Modello sconosciuto`,plateFor:`Piatto per {{filename}}`,moveUp:`Sposta su`,moveDown:`Sposta giù`,queued:`In coda con {{count}} alternative`},selectPrinter:`Seleziona stampante`,selectPlate:`Seleziona piatto`,filamentMapping:`Mappatura filamento`,useArchiveMapping:`Mappatura`,useArchiveMappingTooltip:`Seleziona ogni slot dalla mappatura AMS salvata con questo archivio (dallo slicer), invece di abbinare per tipo/colore.`,clickToChangeSlot:`Fai clic per modificare l'assegnazione dello slot`,reRead:`Rileggi`,plateN:`Piatto {{n}}`,plateFilamentsUnreadable:`Non è stato possibile leggere i filamenti di un piatto selezionato, quindi non può essere assegnato. Deselezionalo per accodare gli altri.`,totalCost:`Costo totale:`,slotRemainingShort:` - {{grams}}g rim.`,printSettings:`Impostazioni stampa`,bedLeveling:`Livellamento piatto`,flowCalibration:`Calibrazione flusso`,vibrationCalibration:`Calibrazione vibrazioni`,layerInspection:`Ispezione primo layer`,timelapse:`Timelapse`,cancel:`Annulla`,noPrintersAvailable:`Nessuna stampante disponibile`,printerBusy:`Stampante occupata`,printerOffline:`Stampante offline`,sameTypeDifferentColor:`Stesso tipo, colore diverso`,filamentTypeNotLoaded:`Tipo di filamento non caricato`,statusReady:`Pronto`,statusColorMismatch:`Colore diverso`,statusTypeNotFound:`Tipo non trovato`,requiredTooltip:`Richiesto: {{name}} - {{color}}`,manuallySelected:`Selezionato manualmente`,autoMatched:`Abbinato automaticamente`,selectSlot:`Scegli slot`,sameTypeDifferentColorDetail:`Stesso tipo, colore diverso: richiede {{required}}, lo slot ha {{loaded}}`,requiredTypeNotInPrinter:`Tipo di filamento richiesto non trovato nella stampante.`,whenToPrint:`Quando stampare`,asap:`Subito`,queue:`Coda`,schedule:`Programma`,dateTime:`Data e ora`,invalidDateTime:`Inserisci data e ora valide`,openCalendar:`Apri calendario`,requireManualStart:`Richiedi avvio manuale`,requirePreviousSuccess:`Avvia solo se la stampa precedente è riuscita`,autoOffAfter:`Spegni la stampante al termine`,helpAsap:`La stampa verrà aggiunta in cima alla coda e partirà appena una stampante idonea è inattiva.`,helpSchedule:`La stampa partirà all'ora programmata se la stampante è inattiva. Se è occupata, attenderà che diventi disponibile.`,helpQueue:`La stampa verrà aggiunta in fondo alla coda.`,leftNozzle:`L`,rightNozzle:`R`,leftNozzleTooltip:`Ugello sinistro`,rightNozzleTooltip:`Ugello destro`,ftsSameInletHint:`Tutti i filamenti di questa stampa sono sul Filament Track Switch IN-{{inlet}}. Il cambio tra filamenti sullo stesso ingresso è più lento: spostane uno su un AMS dell'altro ingresso.`,rackPosition:`Posizione nel rack`,rackPositionTooltip:`Quale ugello del rack stampa questo filamento. Le posizioni sono numerate come sulla stampante.`,rackEmptyPosition:`Questa posizione del rack è vuota`,rackWrongNozzle:`Contiene un ugello {{has}}; questo filamento richiede {{needs}}`,filamentOverride:`Sostituzione filamento`,filamentOverrideHint:`Sostituisci opzionalmente i filamenti per l'assegnazione basata sul modello. Lo scheduler abbinerà i filamenti selezionati invece dei valori 3MF originali.`,originalFilament:`Originale`,overrideWith:`Sostituisci con`,resetToOriginal:`Ripristina originale`,insufficientFilamentTitle:`Filamento insufficiente`,waitingForAmsStatus:`In attesa dello stato AMS di {{printer}}…`,insufficientFilamentMessage:`Alcune bobine assegnate hanno meno filamento rimanente di quanto necessario per questa stampa:`,insufficientFilamentLine:`{{printer}} - {{slot}}: necessita di {{required}}g, rimanenti {{remaining}}g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: necessita di {{required}}g, {{remaining}}g disponibili tra le bobine corrispondenti (AMS Filament Backup)`,printAnyway:`Stampa comunque`,forceColorMatch:`Forza corrispondenza colore`,staggerPrinterStarts:`Scaglionare avvii`,staggerGroupSize:`Dimensione gruppo`,staggerInterval:`Intervallo (min)`,staggerPreview:`{{printers}} stampanti → {{groups}} gruppi di {{size}}, avvio ogni {{interval}} min`,staggerLastGroup:`ultimo gruppo: {{count}}`,staggerTotal:`totale: {{minutes}} min`,staggerToPrinters:`Scagliona a {{count}} stampanti`,gcodeInjection:`Inietta G-code auto-stampa`,insufficientBudget:`Budget insufficiente`,unlimitedNoBudget:`Illimitato – non è impostato alcun limite di budget.`,noPrintableCostCenters:`Non è disponibile alcun centro di costo attivo per la stampa. Chiedi a un amministratore di concederti l’accesso alla stampa.`},backup:{includesEncryptionKey:`I backup locali includono il file della chiave di crittografia MFA (DATA_DIR/.mfa_encryption_key), quindi un backup ZIP è autonomo. Tratta lo ZIP come sensibile — chiunque abbia il file può decifrare i client secret OIDC e i segreti TOTP contenuti.`,title:`Backup e ripristino`,createBackup:`Crea backup`,restoreBackup:`Ripristina backup`,restoreDescription:`Sostituisci tutti i dati da un file di backup`,downloadBackup:`Scarica backup`,uploadBackup:`Carica backup`,lastBackup:`Ultimo backup`,autoBackup:`Backup automatico`,backupNow:`Esegui backup ora`,restoreWarning:`Avviso: il ripristino sovrascriverà tutti i dati attuali.`,includeArchives:`Includi archivi`,includeSettings:`Includi impostazioni`,includeProfiles:`Includi profili`,backupSuccess:`Backup creato con successo`,restoreSuccess:`Backup ripristinato con successo`,backupFailed:`Backup fallito`,restoreFailed:`Ripristino fallito`,restoreNote:`La stampante virtuale verrà fermata durante il ripristino`,githubBackup:`Backup GitHub`,enabled:`Abilitato`,cloudLoginRequired:`Accesso Bambu Cloud richiesto. Accedi in Profili → Profili Cloud per abilitare il backup GitHub.`,cloudLoginRequiredShort:`Accesso Cloud richiesto`,githubDescription:`Sincronizza automaticamente i tuoi profili con un repository GitHub privato per backup e cronologia delle versioni.`,repoIsPrivate:`Il repository è privato — è sicuro effettuare il backup.`,repoIsPublicWarning:`Il repository è PUBBLICO. I backup di Bambuddy includono credenziali MQTT, token di Home Assistant, token di Prometheus, la tua e-mail Bambu Cloud e i codici di accesso alle stampanti tramite K-profile. Il salvataggio è bloccato finché non rendi privato il repository nelle impostazioni del tuo provider.`,repoVisibilityUnknown:`Impossibile determinare la visibilità del repository. Bambuddy rifiuta di eseguire backup su qualsiasi target non confermato come privato; il salvataggio sarà bloccato.`,repositoryUrl:`URL del repository`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Consenti HTTP non sicuro`,allowInsecureHttpHint:`Abilita per istanze self-hosted su reti private senza TLS`,personalAccessToken:`Token di accesso personale`,tokenSaved:`(salvato)`,enterNewToken:`Inserisci un nuovo token per aggiornare`,tokenHintGitHub:`Token a grana fine con accesso in lettura e scrittura a Contents, oppure token classico con ambito repo.`,tokenHintGitLab:`Token con ambito api, oppure read_repository insieme a write_repository.`,tokenHintGitea:`Token con ambito write:repository.`,tokenHintForgejo:`Token con ambito write:repository. Basta un token limitato a questo solo repository.`,branch:`Branch`,provider:`Provider Git`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Solo manuale`,hourly:`Ogni ora`,daily:`Giornaliero`,weekly:`Settimanale`,includeInBackup:`Includi nel backup`,kProfiles:`K-Profili`,kProfilesDescription:`Calibrazione dell'avanzamento pressione dalle stampanti connesse`,noPrintersConnected:`Nessuna stampante connessa`,printersConnected:`{{connected}}/{{total}} connesse`,cloudProfiles:`Profili Cloud`,cloudProfilesDescription:`Preset di filamento, stampante e processo da Bambu Cloud e Orca Cloud`,cloudProfilesAccounts:`Account collegati — Bambu Cloud: {{bambu}}, Orca Cloud: {{orca}}`,appSettings:`Impostazioni App`,appSettingsDescription:`Configurazione Bambuddy (database completo)`,spoolInventory:`Inventario bobine`,spoolInventoryDescription:`Bobine di filamento, cronologia utilizzo e tracciamento costi`,printArchives:`Archivi di stampa`,printArchivesDescription:`Metadati della cronologia di stampa (nessun file gcode/3MF)`,lastBackupAt:`Ultimo backup:`,noBackupsYet:`Nessun backup ancora`,next:`Prossimo:`,startingBackup:`Avvio del backup...`,test:`Test`,enableBackup:`Abilita backup`,testConnection:`Testa connessione`,enterRepoUrl:`Inserisci l'URL del repository`,enterRepoAndToken:`Inserisci l'URL del repository e il token di accesso`,repoRequired:`L'URL del repository è obbligatorio`,tokenRequired:`Il token di accesso è obbligatorio`,githubBackupEnabled:`Backup GitHub abilitato`,tokenUpdated:`Token aggiornato`,settingsSaved:`Impostazioni salvate`,failedToSave:`Salvataggio fallito: {{message}}`,backupCompleteFiles:`Backup completato - {{count}} file aggiornati`,backupSkippedNoChanges:`Backup saltato - nessuna modifica`,backupFailed2:`Backup fallito: {{message}}`,clearedLogs:`{{count}} log eliminati`,failedToClearLogs:`Eliminazione log fallita: {{message}}`,restoreFromGit:{button:`Ripristina da Git`,title:`Ripristina dal backup Git`,subtitle:`Scegli un commit e cosa ripristinare`,commitLabel:`Commit del backup`,latestCommit:`Ultimo backup (punta del branch)`,categoriesLabel:`Cosa ripristinare`,inspecting:`Lettura del contenuto del backup...`,itemCount:`{{count}} nel backup`,overwriteLabel:`Sovrascrivi le voci esistenti`,overwriteOn:`Le voci esistenti verranno aggiornate dal backup.`,overwriteOff:`Vengono aggiunte solo le voci mancanti; quelle esistenti restano invariate.`,selectedCount:`{{count}} selezionati`,restoring:`Ripristino in corso...`,confirmTitle:`Ripristinare dal backup?`,confirmMessage:`Le categorie selezionate verranno ripristinate da questo commit. Le voci mancanti vengono aggiunte, quelle esistenti restano invariate.`,confirmMessageOverwrite:`Le categorie selezionate verranno ripristinate da questo commit sovrascrivendo le voci già presenti in locale. Operazione non annullabile.`,kprofilesOverwriteCaveat:`I profili K sono l'eccezione: scrivere uno slot sostituisce sempre la calibrazione sulla stampante.`,tally:`{{restored}} ripristinati, {{skipped}} saltati, {{failed}} non riusciti`,reloadHint:`Ricarica Bambuddy per vedere i dati ripristinati in tutte le sezioni.`,partialHint:`Le categorie elencate sopra sono state completate e salvate. Quelle mancanti non sono state eseguite.`,failed:`Ripristino non riuscito.`,loadFailed:`Impossibile leggere il repository di backup.`,details:{notPresent:`Non presente in questo commit di backup`,unreadableJson:`JSON illeggibile: {{paths}}`,settingsNoPayload:`Nessuna impostazione nei dati`,settingsCredentialsWillSkip:`{{count}} chiavi simili a credenziali verranno saltate`,settingsCompanionWillSkip:`{{count}} chiavi simili a credenziali verranno saltate e {{companion}} interruttori che dipendono da esse resteranno disattivati`,settingsCompanionOnlyWillSkip:`{{companion}} interruttori resteranno disattivati - le credenziali necessarie a ciascuno non possono essere ripristinate da un backup`,spoolsUsageCount:`inclusi {{count}} record di consumo`,archivesMetadataOnly:`Solo metadati - i file 3MF e le miniature non sono in un backup Git`,kprofilesPrinterCount:`su {{count}} stampanti`},notes:{noData:`Nessun dato di questo tipo in questo backup`,archivesPrinterMissing:`Alcuni archivi facevano riferimento a stampanti non più esistenti - collegamento rimosso`,archivesProjectMissing:`Alcuni archivi facevano riferimento a progetti non più esistenti - collegamento rimosso`,archivesOwnerCleared:`Alcuni archivi facevano riferimento a utenti non più esistenti - proprietario rimosso, quindi sono visibili solo agli utenti con il permesso archives:read_all finché un amministratore non li riassegna`,archivesOwnerUnmatched:`Alcuni archivi indicano un proprietario che questa istanza non ha - il proprietario è stato rimosso anziché dedotto dall'id utente del backup, quindi sono visibili solo agli utenti con il permesso archives:read_all finché un amministratore non li riassegna`,archivesOwnerUnknown:`Alcuni archivi sono stati ripristinati senza proprietario - questo backup non ne registra alcuno, quindi sono visibili solo agli utenti con il permesso archives:read_all finché un amministratore non li riassegna`,archivesUndeleted:`Gli archivi eliminati dopo il backup sono di nuovo visibili - la sovrascrittura era attiva`,archivesMetadataOnly:`Gli archivi ripristinati contengono solo metadati - i file 3MF e le miniature non sono in un backup Git`,spoolUsageUnresolved:`{{count}} record di consumo saltati - la loro bobina non è nell'elenco bobine di questo backup, quindi non c'è nulla a cui collegarli.`,spoolUsageUnlinked:`{{count}} record di consumo ripristinati senza il collegamento alla cronologia di stampa - seleziona Archivi di stampa insieme a Inventario bobine per mantenerlo.`,spoolTagKept:`{{count}} tag bobina lasciati invariati - il backup avrebbe cancellato un tag nel frattempo scansionato, oppure lo avrebbe spostato su una seconda bobina.`,settingsCredentialsSkipped:`{{count}} chiavi simili a credenziali saltate - reinserisci i segreti manualmente`,settingsAuthSkipped:`{{count}} impostazioni di autenticazione saltate - modificale in Impostazioni > Autenticazione così i controlli di blocco restano attivi`,settingsCompanionSkipped:`{{keys}} lasciati disattivati - la credenziale richiesta da ciascuno non può essere ripristinata da un backup e questa istanza non ne ha nessuna salvata, quindi attivarli lascerebbe l'integrazione senza autenticazione`,settingsMqttRelayFailed:`Impostazioni MQTT ripristinate, ma il relay non è stato riconnesso - riavvia Bambuddy`,kprofilesAlwaysOverwrite:`I profili K sovrascrivono sempre lo slot corrispondente sulla stampante`,kprofilesAckUnreliable:`Una stampante che non risponde conta comunque come ripristinata - verifica i profili sulla stampante`,kprofilesPrinterMissing:`Nessuna stampante con numero di serie {{serial}} - saltato`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) non è connessa - saltato`,kprofilesUnknownNozzle:`Diametro ugello inatteso {{nozzle}} per {{serial}} - inviato così com'è`,kprofilesUnmatched:`{{count}} profili per {{nozzle}} non avevano corrispondenza su {{printer}} - aggiunti come nuovi profili`,kprofilesSendFailed:`Impossibile inviare i profili {{nozzle}} a {{printer}} ({{serial}})`,kprofilesRefused:`{{printer}} ({{serial}}) ha rifiutato i profili {{nozzle}}: {{reason}}`,kprofilesStepFailed:`Non è stato possibile completare il passaggio dei profili K - {{reason}}. Quanto ripristinato prima resta salvato.`}},history:`Cronologia`,clear:`Cancella`,date:`Data`,status:`Stato`,trigger:`Tipo`,triggers:{manual:`Backup (manuale)`,scheduled:`Backup (pianificato)`,restore:`Ripristino`},commit:`Commit`,localBackup:`Backup locale`,localBackupDescription:`Crea un backup completo dei tuoi dati Bambuddy includendo database, archivi, upload e tutti i file.`,downloadBackupLabel:`Scarica backup`,completeBackupZip:`Backup completo: database + tutti i file (ZIP)`,download:`Scarica`,preparingBackup:`Preparazione del backup...`,creatingArchive:`Creazione dell'archivio di backup... Potrebbe richiedere del tempo per archivi di grandi dimensioni.`,downloadingFile:`Download del file di backup...`,backupDownloaded:`Backup scaricato con successo`,failedToCreateBackup:`Creazione del backup fallita: {{message}}`,restore:`Ripristina`,restoreReplacesAll:`Il ripristino sostituisce tutti i dati.`,restoreReplacesAllDetail:`Il database e i file attuali verranno completamente sostituiti. È necessario un riavvio dopo il ripristino.`,restoreConfirmTitle:`Ripristina backup`,restoreConfirmMessage:`Sei sicuro di voler ripristinare da "{{filename}}"? Questo sostituirà completamente il tuo database e tutti i file. L'applicazione dovrà essere riavviata dopo il ripristino.`,restoreConfirmButton:`Ripristina backup`,uploadingFile:`Caricamento del file di backup...`,backupRestoredRestart:`Backup ripristinato. Riavvia Bambuddy.`,failedToRestore:`Ripristino del backup fallito. Controlla il formato del file.`,reloadNow:`Ricarica ora`,creatingBackup:`Creazione del backup`,restoringBackup:`Ripristino del backup`,preparing:`Preparazione...`,processing:`Elaborazione...`,doNotClosePage:`Non chiudere questa pagina e non navigare altrove. Questa operazione potrebbe richiedere diversi minuti per backup di grandi dimensioni.`,restoring:`Ripristino in corso...`,restoreComplete:`Ripristino completato`,restoreFailed2:`Ripristino fallito`,importSettings:`Importa impostazioni da un file di backup`,pleaseWaitRestoring:`Attendere durante il ripristino dei dati`,selectBackupFile:`Clicca per selezionare un file di backup (.json o .zip)`,duplicateHandling:`Come funziona la gestione dei duplicati:`,matchPrinters:`Stampanti`,matchPrintersBy:`corrispondenza per numero di serie`,matchSmartPlugs:`Smart Plug`,matchSmartPlugsBy:`corrispondenza per indirizzo IP`,matchNotificationProviders:`Provider di notifica`,matchNotificationProvidersBy:`corrispondenza per nome`,matchFilaments:`Filamenti`,matchFilamentsBy:`corrispondenza per nome + tipo + marca`,matchArchives:`Archivi`,matchArchivesBy:`corrispondenza per hash del contenuto (sempre saltato)`,matchPendingUploads:`Upload in sospeso`,matchPendingUploadsBy:`corrispondenza per nome file`,matchSettingsTemplates:`Impostazioni e modelli`,matchSettingsTemplatesBy:`sempre sovrascritti`,replaceExisting:`Sostituisci dati esistenti`,keepExisting:`Mantieni dati esistenti`,overwriteDescription:`Sovrascrivi gli elementi già esistenti con i dati del backup`,keepDescription:`Ripristina solo gli elementi che non esistono ancora`,overwriteCaution:`Attenzione:`,overwriteWarning:`La sovrascrittura sostituirà le configurazioni attuali con i dati del backup. I codici di accesso delle stampanti non vengono mai sovrascritti per sicurezza.`,cancel:`Annulla`,processingBackup:`Elaborazione del file di backup...`,itemsRestored:`Elementi ripristinati`,itemsSkipped:`Elementi saltati`,restored:`Ripristinati`,skippedAlreadyExist:`Saltati (già esistenti)`,filesCategory:`File (3MF, miniature, ecc.)`,andMore:`...e altri {{count}}`,newApiKeysGenerated:`Nuove chiavi API generate`,keysShownOnce:`Queste chiavi vengono mostrate solo una volta. Copiale ora!`,copy:`Copia`,noDataFound:`Nessun dato da ripristinare trovato nel file di backup.`,close:`Chiudi`,scheduledBackup:`Backup pianificati`,scheduledBackupDescription:`Crea automaticamente snapshot di backup secondo una pianificazione. La directory di output può essere montata su un NAS o storage esterno.`,frequency:`Frequenza`,backupTime:`Tempo`,retention:`Conservazione`,retentionDescription:`Numero di backup da conservare`,outputPath:`Percorso di output`,outputPathPlaceholder:`Predefinito: {{path}}`,outputPathDescription:`Lasciare vuoto per la posizione predefinita`,runNow:`Esegui ora`,backupFiles:`File di backup`,noScheduledBackups:`Nessun backup ancora`,deleteBackup:`Elimina`,deleteBackupConfirm:`Eliminare questo file di backup?`,backupRunning:`Backup in corso...`,scheduledBackupComplete:`Backup completato con successo`,scheduledBackupFailed:`Backup fallito`,nextBackup:`Prossimo backup`,backupSize:`Dimensione`,localTimeHint:`Ora locale ({{tz}})`,defaultPathLabel:`Predefinito:`,pathCheck:{title:`Bambuddy non riesce a scrivere in questa directory`,howToFix:`Come risolvere:`,sandboxed:`Il servizio Bambuddy non riesce a scrivere in {{path}}. La sua unit systemd usa ProtectSystem=strict, che rende ogni directory al di fuori di quelle di installazione, dati e log di sola lettura per il servizio - anche una in cui puoi scrivere dalla tua shell.`,read_only:`{{path}} si trova su un filesystem di sola lettura.`,permission_denied:`Bambuddy non ha il permesso di scrivere in {{path}}. Controlla proprietario e permessi della directory.`,no_space:`Il filesystem che contiene {{path}} è pieno.`,not_a_directory:`{{path}} esiste ma non è una directory.`,missing:`{{path}} non esiste e non è stato possibile crearla.`,error:`Bambuddy non riesce a scrivere in {{path}}.`,ephemeralTitle:`Questi backup non sopravvivono alla ricreazione del container`,container_ephemeral:`{{path}} si trova dentro il container Bambuddy, non sull'host. I backup scritti lì vanno persi quando il container viene ricreato. Monta la directory dall'host:`},categories:{settings:`Impostazioni`,notification_providers:`Provider di notifica`,notification_templates:`Modelli di notifica`,smart_plugs:`Smart Plug`,printers:`Stampanti`,filaments:`Filamenti`,maintenance_types:`Tipi di manutenzione`,archives:`Archivi`,projects:`Progetti`,pending_uploads:`Upload in sospeso`,external_links:`Link esterni`,api_keys:`Chiavi API`}},tags:{title:`Tag`,addTag:`Aggiungi tag`,editTag:`Modifica tag`,deleteTag:`Elimina tag`,tagName:`Nome tag`,tagColor:`Colore tag`,noTags:`Nessun tag`,deleteConfirm:`Sei sicuro di voler eliminare questo tag?`,manageTags:`Gestisci tag`},uploadModal:{title:`Carica file 3MF`,dragDrop:`Trascina e rilascia file .3mf qui`,or:`o`,browseFiles:`Sfoglia file`,extractionInfo:`Il modello stampante sarà estratto automaticamente dai metadati del file 3MF.`,uploaded:`caricati`,failed:`falliti`,uploading:`Caricamento...`,upload:`Carica`,uploadFailed:`Caricamento fallito`},editArchive:{title:`Modifica archivio`,name:`Nome`,namePlaceholder:`Nome stampa`,printer:`Stampante`,noPrinter:`Nessuna stampante`,project:`Progetto`,noProject:`Nessun progetto`,itemsPrinted:`Elementi stampati`,itemsPrintedHelp:`Numero di elementi prodotti in questo job di stampa. Usa 0 se l'intero piatto è rovinato.`,filamentUsed:`Filamento usato (g)`,filamentUsedPlaceholder:`es. 46.16`,filamentUsedHelp:`Inseriscilo a mano quando una stampa è stata archiviata senza il suo 3MF, così da farla rientrare comunque nei totali del filamento. La riscansione di un archivio che ha il suo 3MF rilegge il valore dal file.`,notes:`Note`,notesPlaceholder:`Aggiungi note su questa stampa...`,externalLink:`Link esterno`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Link a Printables, Thingiverse o altra fonte`,tags:`Tag`,tagsPlaceholder:`Aggiungi tag...`,addMoreTags:`Aggiungi altri tag...`,matchingTags:`Tag corrispondenti "{{query}}"`,existingTags:`Tag esistenti`,clickToAdd:`(clicca per aggiungere)`,status:`Stato`,failureReason:`Motivo fallimento`,selectReason:`Seleziona motivo...`,photos:`Foto del risultato stampato`,photosHelp:`Clicca + per aggiungere foto del risultato stampato`,printResult:`Risultato stampa`,saving:`Salvataggio...`,failureReasons:{adhesionFailure:`Fallimento adesione`,spaghettiDetached:`Spaghetti / staccato`,layerShift:`Spostamento layer`,cloggedNozzle:`Ugello intasato`,filamentRunout:`Filamento esaurito`,warping:`Deformazione`,stringing:`Filamento`,underExtrusion:`Sotto-estrusione`,powerFailure:`Mancanza corrente`,userCancelled:`Annullato dall'utente`,noStatusUpdate:`Nessun aggiornamento di stato ricevuto`,other:`Altro`},statuses:{completed:`Completato`,failed:`Fallito`,aborted:`Annullato`,printing:`In stampa`}},kProfiles:{title:`Profili K`,noPrintersConfigured:`Nessuna stampante configurata`,addPrinterInSettings:`Aggiungi una stampante in Impostazioni per gestire i K-profiles`,noActivePrinters:`Nessuna stampante attiva`,enablePrinterConnection:`Abilita una connessione stampante per vedere i K-profiles`,loadingProfiles:`Caricamento K-Profiles...`,printerOffline:`Stampante offline`,printerOfflineDesc:`La stampante selezionata non e connessa. Accendila per vedere i K-profiles.`,noMatchingProfiles:`Nessun profilo corrispondente`,noMatchingProfilesDesc:`Nessun profilo corrisponde ai criteri di ricerca`,noKProfiles:`Nessun K-Profile`,noKProfilesDesc:`Nessun profilo pressure advance per ugello da {{diameter}}mm`,createFirstProfile:`Crea primo profilo`,printer:`Stampante`,nozzle:`Ugello`,refresh:`Aggiorna`,addProfile:`Aggiungi profilo`,export:`Esporta`,import:`Importa`,select:`Seleziona`,selectAll:`Seleziona tutto`,delete:`Elimina`,searchPlaceholder:`Cerca per nome o filamento...`,allExtruders:`Tutti gli estrusori`,leftOnly:`Solo sinistro`,rightOnly:`Solo destro`,allFlow:`Tutto flow`,hfOnly:`Solo HF`,sOnly:`Solo S`,sortName:`Ordina: Nome`,sortKValue:`Ordina: K-Value`,sortFilament:`Ordina: Filamento`,leftExtruder:`Estrusore sinistro`,rightExtruder:`Estrusore destro`,modal:{addTitle:`Aggiungi K-Profile`,editTitle:`Modifica K-Profile`,profileName:`Nome profilo`,profileNamePlaceholder:`Il mio profilo PLA`,kValue:`Valore K`,kValuePlaceholder:`0.020`,kValueHelp:`Intervallo tipico: 0.01 - 0.06 per PLA, 0.02 - 0.10 per PETG`,filament:`Filamento`,selectFilament:`Seleziona filamento...`,source:{local:`Importato`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Integrato`},noFilamentsHelp:`Nessun filamento disponibile. Accedi a Bambu Cloud o importa i preset da Profili → Profili locali.`,searchFilaments:`Cerca filamenti...`,noFilamentMatches:`Nessun filamento corrisponde alla ricerca`,flowType:`Tipo flow`,highFlow:`Alto flusso`,standard:`Standard`,nozzleSize:`Dimensione ugello`,extruder:`Estrusore`,extruders:`Estrusori`,left:`Sinistra`,right:`Destra`,notes:`Note (salvate localmente)`,notesPlaceholder:`Aggiungi note su questo profilo...`,notesHelp:`Le note sono salvate in Bambuddy, non sulla stampante`,syncing:`Sincronizzazione con stampante...`,savingExtruder:`Salvataggio su estrusore {{current}}/{{total}}...`,pleaseWait:`Attendere`},deleteConfirm:{title:`Elimina profilo`,cannotUndo:`Questo non può essere annullato`,message:`Sei sicuro di voler eliminare "{{name}}" dalla stampante?`},bulkDelete:{title:`Elimina profili`,cannotUndo:`Questo non può essere annullato`,message:`Sei sicuro di voler eliminare {{count}} profili selezionati dalla stampante?`},toast:{profileSaved:`K-profile salvato`,profilesSaved:`K-profile salvato su {{count}} estrusori`,selectAtLeastOneExtruder:`Seleziona almeno un estrusore`,selectFilament:`Seleziona prima un filamento`,filamentNotResolvable:`Nessun ID filamento Bambu per {{name}}: la stampante non può salvare un profilo`,profileDeleted:`K-profile eliminato`,profilesDeleted:`Eliminati {{count}} profili`,exportedProfiles:`Esportati {{count}} profili`,importedProfiles:`Importati {{count}} di {{total}} profili`,noProfilesToExport:`Nessun profilo da esportare`,invalidFileFormat:`Formato file non valido`,failedToParseImport:`Parsing file import fallito`,failedToSaveBatch:`Salvataggio K-profiles fallito`,noteSaved:`Nota salvata`,failedToSaveNote:`Salvataggio nota fallito`},permission:{noRead:`Non hai il permesso di aggiornare i profili`,noCreate:`Non hai il permesso di aggiungere profili`,noUpdate:`Non hai il permesso di aggiornare K-profiles`,noDelete:`Non hai il permesso di eliminare K-profiles`,noExport:`Non hai il permesso di esportare profili`,noImport:`Non hai il permesso di importare profili`}},virtualPrinter:{title:`Stampante virtuale`,running:`In esecuzione`,stopped:`Ferma`,description:{default:`Abilita una stampante virtuale che appare in Bambu Studio e OrcaSlicer. I file inviati a questa stampante saranno archiviati senza stampare.`,proxy:`Abilita un proxy che inoltra il traffico slicer a una stampante reale, permettendo la stampa remota su qualsiasi rete.`},enable:{title:`Abilita stampante virtuale`,visibleInSlicer:`Visibile come "Bambuddy" nella ricerca slicer`,proxyingTo:`In proxy verso {{name}}`,notActive:`Non attivo`},model:{title:`Modello stampante`,description:`Seleziona il modello stampante da emulare.`,restartWarning:`Cambiare il modello riavviera la stampante virtuale`},accessCode:{title:`Codice accesso`,isSet:`Codice accesso impostato`,notSet:`Nessun codice accesso impostato - richiesto per abilitare`,placeholder:`Inserisci codice 8 caratteri`,placeholderChange:`Inserisci nuovo codice per cambiare`,hint:`Deve essere esattamente 8 caratteri. Usato dagli slicer per autenticarsi.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Ereditato dalla stampante target`,derivedFromTargetHint:`Usa il codice di accesso della stampante target. Il bridge inoltra l'autenticazione dello slicer alla stampante reale, quindi i codici devono corrispondere — modifica il codice nelle impostazioni della stampante per cambiarlo.`,reveal:`Mostra codice accesso`,hide:`Nascondi codice accesso`},targetPrinter:{title:`Stampante target`,configured:`Target proxy configurato`,notConfigured:`Nessuna stampante target selezionata - richiesta per modalita proxy`,placeholder:`Seleziona una stampante...`,hint:`Seleziona la stampante a cui fare proxy. La stampante deve essere in modalita LAN.`,noPrinters:`Nessuna stampante configurata. Aggiungi una stampante per usare la modalita proxy.`},remoteInterface:{title:`Sovrascrittura interfaccia di rete`,configured:`Sovrascrittura interfaccia attiva`,optional:`Opzionale - usare se l'IP rilevato automaticamente e sbagliato (es. piu NIC, Docker, VPN)`,placeholder:`Rilevamento automatico (predefinito)...`,hint:`Sovrascrive l'indirizzo IP pubblicizzato via SSDP e usato nel certificato TLS. Utile quando Bambuddy ha piu interfacce di rete.`},mode:{title:`Modalita`,archive:`Archivio`,archiveDesc:`Archivia subito i file`,review:`Revisione`,reviewDesc:`Rivedi prima di archiviare`,queue:`Coda`,queueDesc:`Archivia e aggiungi alla coda`,proxy:`Proxy`,proxyDesc:`Inoltra a stampante reale`},autoDispatch:{title:`Avvio automatico`,description:`Avvia automaticamente le stampe aggiunte alla coda. Se disattivato, le stampe attendono l'avvio manuale.`},queueForceColorMatch:{title:`Forza corrispondenza colori`,description:`Rifiuta di inviare a una stampante che non ha esattamente il tipo di filamento e il colore caricato. Disattivato per impostazione predefinita — senza questo, la coda usa solo la corrispondenza per modello e potrebbe scegliere una stampante con il colore sbagliato.`},saveAmsMapping:{title:`Salva mappatura AMS`,description:`Salva nell'archivio la scelta dello slot AMS effettuata dallo slicer stesso (dal comando MQTT project_file), in modo che una ristampa successiva riutilizzi la stessa bobina fisica invece di ricavarla di nuovo dal tipo/colore del file. Disattivato per impostazione predefinita.`},gcodeInjection:{title:`Iniezione G-code`,description:`Applica gli snippet G-code configurati per modello nelle Impostazioni ai lavori di questo VP. Disattivato per impostazione predefinita.`},tailscaleDisabled:{title:`Integrazione Tailscale`,description:`Abilita per contrassegnare questo VP come esposto tramite Tailscale. Mostra l'indirizzo Tailscale dell'host così sai quale IP incollare nello slicer. Il passo di importazione CA è invariato — questo toggle non ha effetto sui certificati.`},setupRequired:{title:`Configurazione necessaria`,description:`La stampante virtuale richiede configurazioni di sistema aggiuntive prima di funzionare. Include port forwarding, regole firewall e impostazioni specifiche della piattaforma.`,readGuide:`Leggi la guida prima di abilitare`},howItWorks:{title:`Come funziona`,step1:`Sulla stessa LAN, le stampanti virtuali appaiono automaticamente nel tuo slicer (Bambu Studio / OrcaSlicer). Da altre reti, aggiungile manualmente tramite indirizzo IP e codice di accesso.`,step2:`In modalità Archivio, Revisione e Coda, usa il pulsante "Invia" nel tuo slicer per caricare file 3MF su Bambuddy. Lo slicer mostrerà "Stampa riuscita" — il file viene salvato, non stampato.`,step3:`In modalità Proxy, la stampante virtuale inoltra tutto il traffico a una stampante reale — le stampe partono immediatamente come con una connessione diretta.`},status:{title:`Dettagli stato`,printerName:`Nome stampante`,model:`Modello`,serialNumber:`Numero seriale`,mode:`Modalita`,pendingFiles:`File in sospeso`,targetPrinter:`Stampante target`,ftpPort:`Porta FTP`,mqttPort:`Porta MQTT`,ftpConnections:`Connessioni FTP`,mqttConnections:`Connessioni MQTT`},toast:{updated:`Impostazioni stampante virtuale aggiornate`,failedToUpdate:`Aggiornamento impostazioni fallito`,copyFailed:`Copia non riuscita — seleziona il testo manualmente`,accessCodeRequired:`Imposta prima un codice accesso`,targetPrinterRequired:`Seleziona prima una stampante target`,bindIpRequired:`Impostare prima un indirizzo IP`,accessCodeEmpty:`Il codice accesso non può essere vuoto`,accessCodeLength:`Il codice accesso deve essere esattamente 8 caratteri`,targetCodeChangedRebind:`Il codice di accesso ora corrisponde alla nuova stampante target. Ri-aggiungi questo dispositivo nel tuo slicer per acquisire il nuovo codice.`,created:`Stampante virtuale creata`,failedToCreate:`Impossibile creare la stampante virtuale`,deleted:`Stampante virtuale eliminata`,failedToDelete:`Impossibile eliminare la stampante virtuale`},list:{title:`Stampanti virtuali`,add:`Aggiungi`,addFirst:`Aggiungi stampante virtuale`,empty:`Nessuna stampante virtuale configurata. Aggiungine una per iniziare.`},bindIp:{title:`Interfaccia di rete`,placeholder:`Seleziona interfaccia...`,hint:`Interfaccia di rete a cui questa stampante virtuale si collega. Deve essere unica per stampante.`},proxy:{accessCodeHint:`In modalita proxy, usa il codice di accesso della stampante di destinazione nello slicer. La connessione viene inoltrata in modo trasparente alla stampante reale.`},addDialog:{title:`Aggiungi stampante virtuale`,name:`Nome`,hint:`Potrai configurare il codice di accesso, la stampante di destinazione e altre impostazioni dopo la creazione.`,create:`Crea`},deleteConfirm:{title:`Elimina stampante virtuale`,message:`Sei sicuro di voler eliminare "{{name}}"? Tutti i servizi di questa stampante verranno interrotti.`},archiveNameSource:{title:`Origine nome archivio`,description:`Scegli come vengono nominati i nuovi archivi quando i file arrivano tramite la stampante virtuale. "Metadati" utilizza il titolo incorporato nello slicer dal 3MF (default). "Nome file" utilizza il nome che Bambu Studio ha inviato via FTP. Nota: Bambu Studio sovrascrive il nome digitato nella finestra "invia a stampante" con il campo Titolo del 3MF quando presente, quindi entrambe le modalità producono spesso la stessa stringa.`,metadata:`Metadati`,filename:`Nome file`},caCert:{title:`Certificato dello slicer`,description:`Le stampanti virtuali usano un certificato TLS firmato dalla CA di Bambuddy. Importa questo certificato CA nell'archivio attendibile del tuo slicer una sola volta affinché accetti la connessione — senza doverlo copiare dalla riga di comando.`,copy:`Copia`,copied:`Copiato`,download:`Scarica`,fingerprint:`SHA-256`}},modelViewer:{openInSlicer:`Apri nello slicer`,openInSlicerWith:`Apri in {{slicer}}`,moreSlicerOptions:`Altre opzioni dello slicer`,openInSlicerFailed:`Impossibile aprire nello slicer`,tabs:{model:`Modello 3D`},notAvailable:`non disponibile`,plates:`Piatti`,allPlates:`Tutti i piatti`,plateNumber:`Piatto {{number}}`,plateCount:`{{count}} piatto`,plateCount_other:`{{count}} piatti`,objectCount:`{{count}} oggetto`,objectCount_other:`{{count}} oggetti`,filamentCount:`{{count}} filamento`,filamentCount_other:`{{count}} filamenti`,eta:`ETA {{minutes}} min`,noPreview:`Nessuna anteprima disponibile per questo file`,pagination:{pageOf:`Pagina {{current}} di {{total}}`,prev:`Prec`,next:`Succ`},errors:{failedToLoad:`Caricamento file fallito`,noMeshes:`Nessuna mesh trovata nel file 3MF`,unsupportedFormat:`Formato file non supportato`}},maintenanceDescriptions:{lubricateCarbonRods:`Applica lubrificante alle aste in carbonio per un movimento fluido`,lubricateRails:`Applica lubrificante alle guide lineari per un movimento fluido`,cleanNozzle:`Pulisci hotend e ugello per prevenire intasamenti`,checkBelts:`Verifica tensione cinghie per stampe accurate`,cleanBuildPlate:`Pulisci il piatto per migliorare l'adesione`,checkExtruder:`Ispeziona ingranaggi estrusore per usura`,checkCooling:`Assicurati che le ventole di raffreddamento funzionino`,generalInspection:`Ispezione generale stampante`,cleanCarbonRods:`Pulisci le aste in carbonio per ridurre attrito`,lubricateSteelRods:`Applica lubrificante alle aste in acciaio per un movimento fluido`,cleanSteelRods:`Pulisci le aste in acciaio per ridurre attrito`,cleanLinearRails:`Pulisci le guide lineari per rimuovere polvere e detriti`,checkPtfeTube:`Ispeziona il tubo PTFE per usura o danni`,replaceHepaFilter:`Sostituisci filtro HEPA per qualità aria`,replaceCarbonFilter:`Sostituisci filtro a carbone attivo`,lubricateLeftNozzleRail:`Lubrifica guida ugello sinistro (serie H2)`},haSensors:{label:`Sensori`,unavailable:`Non disponibile`,blocksPrints:`{{entity}} — trattiene le stampe finché l'allarme è attivo`,states:{open:`Aperto`,closed:`Chiuso`,unlocked:`Sbloccato`,locked:`Bloccato`,detected:`Rilevato`,clear:`Libero`,wet:`Bagnato`,dry:`Asciutto`,problem:`Problema`,ok:`OK`,running:`In funzione`,stopped:`Fermo`,on:`Acceso`,off:`Spento`},sectionTitle:`Sensori Home Assistant (stampanti)`,add:`Aggiungi sensore`,addTitle:`Aggiungi sensore Home Assistant`,editTitle:`Modifica sensore Home Assistant`,empty:`Nessun sensore. Collega un contatto porta o un termometro da Home Assistant per mostrarlo sulla scheda stampante.`,unknownPrinter:`Stampante sconosciuta`,badgeBlocks:`Trattiene le stampe`,badgeNotifies:`Notifica`,badgeHidden:`Nascosto sulla scheda`,printer:`Stampante`,entity:`Entità`,searchPlaceholder:`Cerca entità...`,noEntities:`Nessuna entità corrispondente`,name:`Nome visualizzato`,alertWhen:`Allarme quando`,alertNever:`Mai — solo visualizzazione`,alertAbove:`Sopra`,alertBelow:`Sotto`,alertHint:`Lo stato di allarme evidenzia il sensore sulla scheda stampante e abilita le opzioni sottostanti.`,showOnCard:`Mostra sulla scheda stampante`,notifyOnAlert:`Invia una notifica quando scatta l'allarme`,blockPrint:`Trattieni le stampe in coda finché l'allarme è attivo`,blockPrintHint:`I lavori restano in coda e partono da soli quando il sensore rientra. Ignorato finché Home Assistant non è raggiungibile.`,toast:{created:`Sensore aggiunto`,updated:`Sensore salvato`,deleted:`Sensore rimosso`},error:{pickEntity:`Scegli un'entità Home Assistant`,nameRequired:`Inserisci un nome visualizzato`,printerRequired:`Scegli una stampante`,alertRequired:`Imposta prima una condizione di allarme`}},locationHaSensors:{sectionTitle:`Sensori Home Assistant (posizioni di archiviazione)`,sectionDescription:`Collega sensori di temperatura, umidità o batteria di Home Assistant alle tue posizioni di archiviazione per mostrare le letture in tempo reale sulla scheda del filamento e nella tabella. È consentito un solo sensore per categoria per posizione.`,add:`Aggiungi sensore`,addTitle:`Aggiungi sensore Home Assistant`,editTitle:`Modifica sensore Home Assistant`,empty:`Nessun sensore. Collega un sensore di temperatura o umidità da Home Assistant per mostrarlo sulla scheda del filamento.`,unknownLocation:`Posizione sconosciuta`,location:`Posizione di archiviazione`,showOnCard:`Mostra sulla scheda del filamento`,overwriteConfirm:{title:`Sostituire il sensore esistente?`,messageTemperature:`"{{location}}" ha già un sensore di temperatura collegato: {{name}}. Continuando verrà sostituito.`,messageHumidity:`"{{location}}" ha già un sensore di umidità collegato: {{name}}. Continuando verrà sostituito.`,messageBattery:`"{{location}}" ha già un sensore di batteria collegato: {{name}}. Continuando verrà sostituito.`},autoAdd:{confirmTitle:`Aggiungere anche gli altri sensori?`,confirmMessage:`Bambuddy ha trovato anche altri sensori per questa posizione. Scegli quali aggiungere.`,added:`Aggiunto anche: {{names}}`,noneFound:`Nessun sensore di temperatura, umidità o batteria corrispondente trovato per questa posizione.`,onlyThisOne:`Solo questo`},options:{buttonLabel:`Opzioni sensori`,title:`Opzioni sensori di posizione`,description:`Questi valori vengono usati quando un sensore di temperatura, umidità o batteria viene collegato automaticamente insieme al primo sensore di una posizione.`,generalSettings:`Impostazioni generali`,pollInterval:`Intervallo di aggiornamento (secondi)`,pollIntervalHint:`Con quale frequenza Bambuddy interroga Home Assistant e aggiorna i valori dei sensori a schermo. Minimo 60 secondi.`,colorizeValues:`Colora i valori dei sensori in base alle relative soglie di allarme`,aboveColor:`Colore sopra la soglia`,belowColor:`Colore sotto la soglia`,optimalColor:`Colore per il valore ottimale`,colors:{red:`Rosso`,orange:`Arancione`,yellow:`Giallo`,green:`Verde`,blue:`Blu`,purple:`Viola`,pink:`Rosa`},saved:`Opzioni salvate`,saveFailed:`Impossibile salvare le opzioni`,reset:`Ripristina`,resetConfirm:{title:`Reimpostare tutti i sensori di posizione esistenti?`,message:`Questo sovrascrive le soglie di allarme, le notifiche e la visibilità sulla scheda di tutti i sensori di temperatura, umidità e batteria di posizione esistenti con i valori configurati sopra, e ripristina il nome di ciascun sensore al suo nome descrittivo di Home Assistant: i sensori della stampante non sono interessati. Questa azione non può essere annullata. A seconda del numero di sensori, questa operazione potrebbe richiedere un momento.`},resetDone:`Applicato a {{count}} sensori di posizione`,resetFailed:`Impossibile reimpostare i sensori di posizione`},deleteAllConfirm:{title:`Eliminare tutti i sensori?`,message:`Questo rimuove tutti i {{count}} sensori collegati a "{{location}}". Questa azione non può essere annullata.`},currentlyBound:`Attualmente collegato: {{entity}}`,error:{locationRequired:`Scegli una posizione di archiviazione`},toast:{created:`Sensore aggiunto`,updated:`Sensore salvato`,deleted:`Sensore rimosso`}},smartPlugs:{offline:`Offline`,admin:`Amministrazione`,openPlugAdminPage:`Apri pagina amministrazione presa`,deleteSmartPlug:`Elimina presa smart`,turnOnSmartPlug:`Accendi presa smart`,turnOffSmartPlug:`Spegni presa smart`,turnOn:`Accendi`,turnOff:`Spegni`,addSmartPlug:{scanningNetwork:`Scansione rete...`,chooseEntity:`Scegli un'entità...`,connectionFailed:`Connessione fallita`,searchEntities:`Cerca entità...`,searchPowerSensors:`Cerca sensori di potenza...`,searchEnergySensors:`Cerca sensori di energia...`,placeholders:{plugName:`Presa soggiorno`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Stesso del topic potenza, o diverso`}},linkedTo:`Collegato a:`,monitorOnly:`Solo monitoraggio`,alerts:`Avvisi`,scheduleOn:`Alle {{time}}`,scheduleOff:`Spento {{time}}`,on:`On`,off:`Spento`,power:`Potenza`,kwhToday:`kWh Oggi`,settings:`Impostazioni`,automationSettings:`Impostazioni automazione`,showInSwitchbar:`Mostra nella barra interruttori`,quickAccessSidebar:`Accesso rapido dalla barra laterale`,enabled:`Abilitato`,enableAutomation:`Abilita automazione per questa presa`,autoOn:`Auto On`,autoOnDescription:`Accendi quando inizia la stampa`,autoOff:`Auto Off`,autoOffDescription:`Spegni quando la stampa è completata (una tantum)`,autoOffPersistent:`Mantieni attivo`,autoOffPersistentDescription:`Resta attivo tra le stampe invece di una tantum`,controlsPrinterPower:`Alimenta la stampante`,controlsPrinterPowerDescription:`Disattiva se questa presa alimenta solo un accessorio (ventola del filtro, luci). Altrimenti spegnerla segna la stampante come offline.`,autoOffAfterDrying:`Spegni dopo asciugatura`,autoOffAfterDryingDescription:`Spegni al termine dell'asciugatura AMS`,delayAfterDryingMinutes:`Ritardo dopo asciugatura (minuti)`,turnOffDelayMode:`Modalità ritardo spegnimento`,time:`Tempo`,temp:`Temp.`,delayMinutes:`Ritardo (minuti)`,tempThreshold:`Soglia temperatura (°C)`,tempThresholdDescription:`Si spegne quando l'ugello si raffredda sotto questa temperatura`,edit:`Modifica`,deleteConfirm:`Sei sicuro di voler eliminare "{{name}}"? Questa azione non può essere annullata.`,turnOnConfirm:`Sei sicuro di voler accendere "{{name}}"?`,turnOffConfirm:`Sei sicuro di voler spegnere "{{name}}"? Questo interromperà l'alimentazione del dispositivo collegato.`,failedToTurn:`Impossibile {{action}} "{{name}}"`,unknown:`Sconosciuto`,addTitle:`Aggiungi presa smart`,editTitle:`Modifica presa smart`,stopScanning:`Interrompi scansione`,discoverTasmota:`Scopri dispositivi Tasmota`,foundDevices:`{{count}} dispositivo/i trovato/i - clicca per selezionare:`,noDevicesFound:`Nessun dispositivo Tasmota trovato nella rete`,haNotConfigured:`Home Assistant non è configurato. Configuralo in`,haSettingsPath:`Impostazioni → Rete → Home Assistant`,selectEntity:`Seleziona entità *`,ipAddress:`Indirizzo IP *`,nameLabel:`Nome *`,username:`Nome utente`,password:`Password`,authHint:`Lascia vuoto se il tuo dispositivo Tasmota non richiede autenticazione`,linkToPrinter:`Collega alla stampante`,noPrinter:`Nessuna stampante (solo controllo manuale)`,linkingDescription:`Il collegamento abilita accensione/spegnimento automatico all'inizio/fine stampa`,powerAlerts:`Avvisi potenza`,alertAbove:`Avviso se sopra (W)`,alertBelow:`Avviso se sotto (W)`,alertDescription:`Ricevi notifiche quando il consumo supera queste soglie. Lascia vuoto per disabilitare quella direzione.`,dailySchedule:`Programma giornaliero`,turnOnAt:`Accendi alle`,turnOffAt:`Spegni alle`,scheduleDescription:`Accendi/spegni automaticamente la presa a questi orari ogni giorno. Lascia vuoto per saltare quell'azione.`,showOnPrinterCard:`Mostra sulla scheda stampante`,displayOnPrinterCard:`Mostra pulsante sulla scheda stampante`,connectedResult:`Connesso!`,deviceLabel:`Dispositivo: {{name}} - `,stateLabel:`Stato: {{state}}`,test:`Test`,delete:`Elimina`,save:`Salva`,add:`Aggiungi`,cancel:`Annulla`,failedToStartScan:`Impossibile avviare la scansione`,nameRequired:`Il nome è obbligatorio`,entityRequired:`L'entità è obbligatoria per le prese Home Assistant`,mqttTopicRequired:`Almeno un topic MQTT deve essere configurato per potenza, energia o monitoraggio stato`,loadingEntities:`Caricamento entità...`,loading:`Caricamento...`,failedToLoadEntities:`Impossibile caricare le entità: {{error}}`,noEntitiesMatching:`Nessuna entità trovata corrispondente a "{{search}}"`,noEntitiesAvailable:`Nessuna entità disponibile`,searchingEntities:`Ricerca in tutte le entità ({{count}} trovate)`,showingEntities:`Mostrando switch, light, input_boolean ({{count}} disponibili)`,energyMonitoringOptional:`Monitoraggio energia (Opzionale)`,energyMonitoringHint:`Cerca e seleziona i sensori che forniscono dati di potenza/energia.`,powerSensorW:`Sensore potenza (W)`,energyTodayKwh:`Energia oggi (kWh)`,totalEnergyKwh:`Energia totale (kWh)`,noMatchingSensors:`Nessun sensore corrispondente`,none:`Nessuno`,mqttNotConfigured:`Broker MQTT non configurato. Imposta l'indirizzo del broker in`,mqttSettingsPath:`Impostazioni → Rete → Pubblicazione MQTT`,mqttNotConfiguredSuffix:`(non è necessario abilitare la pubblicazione, basta inserire i dettagli del broker).`,mqttMonitorOnlyDescription:`Le prese MQTT ricevono dati di potenza/energia tramite sottoscrizione MQTT. Il controllo on/off non è disponibile - usa il tuo broker MQTT o sistema domotico.`,powerMonitoring:`Monitoraggio potenza`,energyMonitoring:`Monitoraggio energia`,stateMonitoring:`Monitoraggio stato`,optional:`opzionale`,topic:`Argomento`,jsonPath:`Percorso JSON`,multiplier:`Moltiplicatore`,onValue:`Valore ON`,mqttPowerHint:`Il percorso JSON estrae il valore dal payload JSON (es. "power_l1"). Lascia vuoto se il topic pubblica valori numerici grezzi.
+ON値: "ON"を意味する正確な文字列。自動検出（ON、true、1）の場合は空のままにしてください。`,restControl:`コントロール`,restOnUrl:`オンURL`,restOffUrl:`オフURL`,restOnBody:`ONリクエスト本文`,restOffBody:`OFFリクエスト本文`,restMethod:`HTTPメソッド`,restHeaders:`Custom Headers (JSON)`,restStatusUrl:`ステータスURL`,restStatusPath:`状態JSONパス`,restStatusOnValue:`ON値`,restPowerUrl:`電力URL`,restPowerPath:`電力JSONパス`,restPowerMultiplier:`電力乗数`,restEnergyUrl:`エネルギーURL`,restEnergyPath:`エネルギーの JSON パス (今日)`,restEnergyTotalPath:`エネルギーの JSON パス (積算値)`,restEnergyTotalMultiplier:`積算値の乗数`,restEnergyTotalPathHint:`例: aenergy.total`,restEnergyTotalHint:`多くのスマートプラグ (Shelly はすべて) は、リセットされない積算カウンターしか返しません。その値は上の欄ではなく、ここに入力してください。今日の使用量として読むと深夜にリセットされず、昨日と合計は空のままになります。Bambuddy は積算値から今日と昨日を算出しますが、そのためには 1〜2 日分の測定値が必要です。Shelly はワット時で返すため、乗数には 0.001 を指定してください。`,restEnergyMultiplier:`エネルギー乗数`,restUrlRequired:`RESTプラグには少なくとも1つのURL（ONまたはOFF）が必要`,restHeadersHint:`例: {"Authorization": "Bearer your-token"}`,restBodyHint:`例：ON, {"state": "on"}`,restStatusHint:`現在の状態を取得するURL`,restPathHint:`例: state または data.power.status`,restPowerUrlHint:`電力データ用の個別URL（空欄の場合はステータスURLを使用）`,restEnergyUrlHint:`エネルギーデータ用の個別URL（空欄の場合はステータスURLを使用）`,restEnergyHint:`各値は個別のURLを使用するか、ステータスURLにフォールバックできます。乗数で単位変換が可能です（例：WhからkWhへの変換は0.001）。`,testConnection:`接続テスト`,connectionSuccess:`接続成功`,noSwitchesInSwitchbar:`スイッチバーにスイッチがありません`,enableSwitchbarHint:`設定 > スマートプラグで「スイッチバーに表示」を有効にしてください`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`メール`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`SMTPメール通知`,telegram:`Telegramボット経由の通知`,discord:`Webhook経由でDiscordチャンネルに送信`,ntfy:`無料のセルフホスト可能なプッシュ通知`,pushover:`シンプルで信頼性の高いプッシュ通知`,callmebot:`CallMeBot経由の無料WhatsApp通知`,webhook:`任意のURLへの汎用HTTP POST`,homeassistant:`Home Assistantダッシュボードの永続通知`,bark:`Bark経由のiOSプッシュ通知（セルフホスト可能）`},lastSuccess:`最終: {{date}}`,error:`エラー`,printer:`プリンター:`,allPrinters:`すべてのプリンター`,sendTestNotification:`テスト通知を送信`,eventSettings:`イベント設定`,enabled:`有効`,sendFromProvider:`このプロバイダーから通知を送信`,printEvents:`印刷イベント`,printerStatus:`プリンターステータス`,amsAlarms:`AMSアラーム`,amsHtAlarms:`AMS-HTアラーム`,printQueue:`印刷キュー`,start:`開始`,plateCheck:`プレートチェック`,complete:`完了`,failed:`失敗`,stopped:`停止`,progress:`進捗`,offline:`オフライン`,lowFilament:`フィラメント残量低下`,maintenance:`メンテナンス`,amsHumidity:`AMS湿度`,amsTemp:`AMS温度`,amsDryingSuspended:`乾燥を停止`,amsHtHumidity:`AMS-HT湿度`,amsHtTemp:`AMS-HT温度`,bedCooled:`ベッド冷却済み`,firstLayer:`第1層完了`,quiet:`静音`,digest:`ダイジェスト {{time}}`,printStarted:`印刷開始`,plateNotEmpty:`プレートが空でない`,plateNotEmptyDescription:`印刷前にオブジェクトが検出されました`,plateClearRequired:`プレート確認が必要`,plateClearRequiredDescription:`印刷完了、キューはプレート確認を待機中`,plateClear:`プレート確認`,printCompleted:`印刷完了`,bedCooledLabel:`ベッド冷却済み`,bedCooledDescription:`印刷後にベッドがしきい値以下に冷却`,firstLayerCompleteLabel:`第1層完了`,firstLayerCompleteDescription:`第1層完了時にスナップショット付きで通知`,missingSpoolAssignmentLabel:`スプール割り当て不足`,billingChargeFailedLabel:`請求処理エラー`,billingChargeFailedDescription:`印刷コストを記録できなかった場合に通知します`,missingSpoolAssignmentDescription:`印刷開始時に必要トレイへスプールが未割り当ての場合に通知`,printFailed:`印刷失敗`,printStopped:`印刷停止`,progressMilestones:`進捗マイルストーン`,progressMilestonesDescription:`25%、50%、75%で通知`,printerOffline:`プリンターオフライン`,printerError:`プリンターエラー`,aiFailureDetection:`AI 故障検出`,aiFailureDetectionDescription:`Obico AI が印刷の不具合の可能性を検出したときに通知`,lowFilamentLabel:`フィラメント残量低下`,maintenanceDue:`メンテナンス期限`,maintenanceDueDescription:`メンテナンスが必要な場合に通知`,amsHumidityHigh:`AMS湿度高`,amsHumidityHighDescription:`通常AMSの湿度がしきい値を超過`,amsTemperatureHigh:`AMS温度高`,amsTemperatureHighDescription:`通常AMSの温度がしきい値を超過`,amsDryingSuspendedTitle:`自動乾燥の停止`,amsDryingSuspendedDescription:`湿度がしきい値を下回らなかったため、AMS ユニットの自動乾燥を中止しました`,amsHtHumidityHigh:`AMS-HT湿度高`,amsHtHumidityHighDescription:`AMS-HTの湿度がしきい値を超過`,amsHtTemperatureHigh:`AMS-HT温度高`,amsHtTemperatureHighDescription:`AMS-HTの温度がしきい値を超過`,inventoryAlerts:`在庫アラート`,stockReorderAlert:`発注アラート`,stockReorderAlertDescription:`SKUが発注点に達しました`,stockBreakAlert:`在庫切れアラート`,stockBreakAlertDescription:`入荷前に在庫が枯渇する見込みです`,jobAdded:`ジョブ追加`,jobAddedDescription:`キューにジョブが追加されました`,jobAssigned:`ジョブ割り当て`,jobAssignedDescription:`モデルベースのジョブがプリンターに割り当てられました`,jobStarted:`ジョブ開始`,jobStartedDescription:`キュージョブの印刷が開始されました`,jobWaiting:`ジョブ待機中`,jobWaitingDescription:`フィラメントまたはプリンター待ちのジョブ`,jobSkipped:`ジョブスキップ`,jobSkippedDescription:`ジョブがスキップされました（前のジョブが失敗）`,jobFailed:`ジョブ失敗`,jobFailedDescription:`ジョブの開始に失敗しました`,queueComplete:`キュー完了`,queueCompleteDescription:`すべてのキュージョブが完了しました`,quietHours:`静音時間`,noNotificationsDuring:`この時間帯は通知を送信しません`,editProviderToChangeQuietHours:`プロバイダーを編集して静音時間を変更`,dailyDigest:`デイリーダイジェスト`,batchNotifications:`通知をまとめて1日のサマリーとして送信`,sendAt:`{{time}}に送信`,editProviderToChangeDigestTime:`プロバイダーを編集してダイジェスト時刻を変更`,edit:`編集`,deleteProvider:`通知プロバイダーを削除`,deleteConfirm:`"{{name}}"を削除してもよろしいですか？この操作は取り消せません。`,delete:`削除`,addTitle:`通知プロバイダーを追加`,editTitle:`通知プロバイダーを編集`,nameLabel:`名前 *`,namePlaceholder:`マイ通知`,providerTypeLabel:`プロバイダータイプ *`,configuration:`設定`,testConfiguration:`設定をテスト`,printerFilter:`プリンターフィルター`,onlyFromPrinter:`このプリンターからのイベントのみ通知を送信`,quietHoursDnd:`静音時間（おやすみモード）`,quietStart:`開始`,quietEnd:`終了`,dailyDigestLabel:`デイリーダイジェスト`,sendDigestAt:`ダイジェスト送信時刻`,digestCollected:`イベントが収集され、この時刻にまとめて送信されます`,notificationEvents:`通知イベント`,progressPercent:`（25%、50%、75%）`,bedCooledAfterPrint:`（印刷完了後）`,haSensorAlert:`プリンターセンサーアラート`,haSensorAlertDescription:`（連携した Home Assistant センサーに注意が必要です）`,locationHaSensorAlert:`保管場所センサーアラート`,locationHaSensorAlertDescription:`（保管場所に連携した Home Assistant センサーに注意が必要です）`,eventPriority:{sectionTitle:`ntfy 優先度`,helpNtfy:`有効な各イベントに優先度を選択してください。ntfy はこれを使って通知の挙動（音、表示、プッシュ動作）を切り替えます。ここで設定していないレベルは ntfy サーバーのデフォルトを使用します。`,min:`最小`,low:`低`,default:`デフォルト`,high:`高`,urgent:`緊急`},cancel:`キャンセル`,save:`保存`,add:`追加`,nameRequired:`名前は必須です`,fieldRequired:`{{field}}は必須です`,haDataInvalid:`Dataフィールドは有効なJSONオブジェクトである必要があります（例: {"priority": "high", "ttl": 0}）`,phoneNumber:`電話番号`,apiKey:`APIキー`,serverUrl:`サーバーURL`,topic:`トピック`,authToken:`認証トークン`,userKey:`ユーザーキー`,appToken:`アプリトークン`,priority:`優先度`,pushoverRetry:`緊急再通知 (秒)`,pushoverExpire:`緊急有効期限 (秒)`,botToken:`ボットトークン`,chatId:`チャットID`,telegramThreadId:`フォーラムトピック ID`,telegramThreadIdHelp:`任意。フォーラムグループ内の特定のトピックに送信します。トピックリンクの末尾の数字です (t.me/c/.../25)。空欄の場合は General トピックに送信されます。`,telegramThreadIdInvalid:`フォーラムトピック ID は数値で入力してください。`,smtpServer:`SMTPサーバー`,smtpPort:`SMTPポート`,security:`セキュリティ`,authentication:`認証`,username:`ユーザー名`,password:`パスワード`,fromEmail:`送信元メール`,toEmail:`宛先メール`,webhookUrl:`WebhookのURL`,payloadFormat:`ペイロード形式`,authorization:`認可`,titleFieldName:`タイトルフィールド名`,messageFieldName:`メッセージフィールド名`,editTemplate:`テンプレートを編集: {{name}}`,titleLabel:`タイトル`,bodyLabel:`本文`,titlePlaceholder:`通知タイトル...`,bodyPlaceholder:`通知本文...`,availableVariables:`利用可能な変数`,clickToInsert:`クリックして本文のカーソル位置に挿入`,livePreview:`ライブプレビュー`,hide:`非表示`,show:`表示`,loadingPreview:`プレビューを読み込み中...`,enterTemplateContent:`テンプレートの内容を入力するとプレビューが表示されます`,titlePreview:`タイトル:`,bodyPreview:`本文:`,resetToDefault:`デフォルトにリセット`,titleRequired:`タイトルは必須です`,bodyRequired:`本文は必須です`,notificationLog:`通知ログ`,showFailedOnly:`失敗のみ`,last24Hours:`過去24時間`,last7Days:`過去7日間`,last30Days:`過去30日間`,last90Days:`過去90日間`,justNow:`たった今`,noFailedNotifications:`失敗した通知はありません`,noNotificationsLogged:`記録された通知はありません`,unknownProvider:`不明なプロバイダー`,logTitle:`タイトル`,logMessage:`メッセージ`,logError:`エラー`,logProvider:`プロバイダー: {{type}}`,logTime:`時刻: {{time}}`,refresh:`更新`,clearOld:`古いものを削除`,statsSummary:`過去{{days}}日間:`,statsNotifications:`通知`,statsSent:`{{count}}件送信`,statsFailed:`{{count}}件失敗`,eventTypes:{print_start:`印刷開始`,print_complete:`印刷完了`,print_failed:`印刷失敗`,print_stopped:`印刷停止`,print_progress:`進捗`,printer_offline:`プリンターオフライン`,printer_error:`プリンターエラー`,filament_low:`フィラメント残量低下`,maintenance_due:`メンテナンス期限`,test:`テスト`},userEmail:{title:`通知`,emailNotifications:`メール通知`,emailNotificationsDesc:`自分の印刷ジョブに対してメール通知を受け取ります。メールは高度な認証で設定されたSMTP設定を使用して送信されます。`,sendingTo:`通知の送信先`,noEmailWarning:`アカウントにメールアドレスが設定されていません。管理者に連絡して追加してもらってください。`,printJobNotifications:`印刷ジョブ通知`,printJobNotificationsDesc:`送信した印刷ジョブのどのイベントでメール通知を送るかを選択します。`,printJobStarts:`印刷ジョブ開始`,printJobStartsDesc:`印刷ジョブが開始されたときに通知を受け取る。`,printJobFinishes:`印刷ジョブ完了`,printJobFinishesDesc:`印刷ジョブが正常に完了したときに通知を受け取る。`,printErrors:`印刷エラー`,printErrorsDesc:`印刷ジョブが失敗またはエラーが発生したときに通知を受け取る。`,printJobStops:`印刷ジョブ停止`,printJobStopsDesc:`印刷ジョブがキャンセルまたは停止されたときに通知を受け取る。`,saveSuccess:`通知設定を保存しました。`,saveError:`通知設定の保存に失敗しました。`}},richTextEditor:{bold:`太字`,italic:`斜体`,underline:`下線`,bulletList:`箇条書きリスト`,numberedList:`番号付きリスト`,alignLeft:`左揃え`,alignCenter:`中央揃え`,alignRight:`右揃え`,addLink:`リンクを追加`,removeLink:`リンクを削除`},externalLinks:{title:`サイドバーリンク`,sidebarLayout:`サイドバー`,sidebarLayoutDescription:`組み込みページの表示/非表示を切り替え、外部リンクを追加し、項目をドラッグしてサイドバーナビゲーションを並べ替えます。`,systemPages:`Bambuddyページ`,externalLinks:`外部リンク`,visibleInSidebar:`サイドバーに表示`,hiddenFromSidebar:`サイドバーで非表示`,requiredInSidebar:`サイドバーで必須`,hidePage:`ページを非表示`,showPage:`ページを表示`,settingsCannotBeHidden:`設定は非表示にできません`,noLinksConfigured:`外部リンクが設定されていません`,deleteLink:`リンクを削除`,removeCustomIcon:`カスタムアイコンを削除`,openInNewTab:`新しいタブで開く`,placeholders:{linkName:`マイリンク`}},keyboardShortcuts:{title:`キーボードショートカット`,navigation:`ナビゲーション`,archivesSection:`アーカイブ`,kProfilesSection:`Kプロファイル`,generalSection:`全般`,shortcuts:{goToPrinters:`プリンターへ移動`,goToArchives:`アーカイブへ移動`,goToQueue:`キューへ移動`,goToStats:`統計へ移動`,goToProfiles:`クラウドプロファイルへ移動`,goToSettings:`設定へ移動`,focusSearch:`検索にフォーカス`,openUploadModal:`アップロードモーダルを開く`,clearSelection:`選択をクリア / 入力をぼかす`,contextMenu:`カードのコンテキストメニュー`,refreshProfiles:`プロファイルを更新`,newProfile:`新しいプロファイル`,exitSelectionMode:`選択モードを終了`,showHelp:`このヘルプを表示`},footer:`Escキーを押すか外側をクリックして閉じます`},notificationLog:{title:`通知ログ`,events:{printStarted:`印刷開始`,printComplete:`印刷完了`,printFailed:`印刷失敗`,printStopped:`印刷停止`,progress:`進捗`,printerOffline:`プリンターオフライン`,printerError:`プリンターエラー`,lowFilament:`フィラメント残量低下`,maintenanceDue:`メンテナンス期限`,test:`テスト`},timeAgo:{justNow:`たった今`,minutesAgo:`{{minutes}}分前`,hoursAgo:`{{hours}}時間前`}},restoreBackup:{title:`バックアップを復元`,restoring:`復元中...`,restoreComplete:`復元完了`,restoreFailed:`復元失敗`,importSettings:`バックアップファイルから設定をインポート`,pleaseWait:`データの復元中です。しばらくお待ちください`,clickToSelect:`クリックしてバックアップファイルを選択（.jsonまたは.zip）`,howDuplicateHandling:`重複の処理方法:`,categories:{printers:`プリンター`,smartPlugs:`スマートプラグ`,notificationProviders:`通知プロバイダー`,filaments:`フィラメント`,archives:`アーカイブ`,pendingUploads:`保留中のアップロード`,settingsTemplates:`設定とテンプレート`},matchingInfo:{printers:`シリアル番号で照合`,smartPlugs:`IPアドレスで照合`,notificationProviders:`名前で照合`,filaments:`名前+タイプ+ブランドで照合`,archives:`コンテンツハッシュで照合`,pendingUploads:`ファイル名で照合`,settingsTemplates:`常に上書き`},replaceExisting:`既存データを置き換え`,keepExisting:`既存データを保持`,replaceDescription:`既に存在するアイテムをバックアップデータで上書き`,keepDescription:`まだ存在しないアイテムのみを復元`,caution:`注意:`,cautionText:`上書きすると現在の構成がバックアップデータに置き換えられます。セキュリティ上の理由から、プリンターのアクセスコードは上書きされません。`,itemsRestored:`復元されたアイテム`,itemsSkipped:`スキップされたアイテム`,restored:`復元済み`,skipped:`スキップ（既に存在）`,filesLabel:`ファイル（3MF、サムネイルなど）`,newApiKeysGenerated:`新しいAPIキーが生成されました`,newApiKeysWarning:`これらのキーは一度だけ表示されます。今すぐコピーしてください！`,processingBackup:`バックアップファイルを処理中...`,noDataFound:`バックアップファイルに復元するデータが見つかりませんでした。`,failedToRestore:`バックアップの復元に失敗しました。ファイル形式を確認してください。`},backupExport:{title:`バックアップをエクスポート`,selectData:`含めるデータを選択`,selectAll:`すべて選択`,selectNone:`なし`,categoryDescriptions:{settings:`言語、テーマ、更新設定`,notifications:`ntfy、Pushover、Discordなど`,templates:`カスタムメッセージテンプレート`,smartPlugs:`Tasmotaプラグ設定`,externalLinks:`サイドバーの外部サービスへのリンク`,printers:`プリンター情報（アクセスコード除外）`,plateDetection:`空プレート参照画像`,filaments:`フィラメントの種類とコスト`,maintenance:`カスタムメンテナンススケジュール`,archives:`すべての印刷データ+ファイル（3MF、サムネイル、写真）`,projects:`プロジェクト、BOMアイテム、添付ファイル`,pendingUploads:`仮想プリンターアップロード待機中`,apiKeys:`Webhook APIキー（インポート時に新しいキーが生成されます）`},requiresPrinters:`プリンターを選択する必要があります`,zipFileWarning:`ZIPファイルが作成されます。`,zipFileDescription:`すべての3MFファイル、サムネイル、タイムラプス、写真が含まれます。これには時間がかかり、大きなファイルになる可能性があります。`,includeAccessCodes:`アクセスコードを含める`,includeAccessCodesDescription:`別のマシンへの転送用`,includeAccessCodesWarning:`アクセスコードはプレーンテキストで含まれます。このバックアップファイルを安全に保管してください！`,categoriesSelected:`{{selectedCount}}カテゴリー選択済み`},pendingUploads:{placeholders:{notes:`この印刷に関するメモを追加...`},discardUpload:`アップロードを破棄`,archiveAllUploads:`すべてのアップロードをアーカイブ`,discardAllUploads:`すべてのアップロードを破棄`,archive:`アーカイブ`,timeAgo:{justNow:`たった今`,minutesAgo:`{{minutes}}分前`,hoursAgo:`{{hours}}時間前`,daysAgo:`{{days}}日前`}},apiBrowser:{placeholders:{requestBody:`JSONリクエストボディ...`,searchEndpoints:`エンドポイントを検索...`}},configureAmsSlot:{title:`AMSスロットの設定`,slotConfigured:`スロットを設定しました！`,configuringSlot:`スロットを設定中：`,slotLabel:`{{ams}} スロット {{slot}}`,searchPresets:`プリセットを検索...`,colorPlaceholder:`色名またはHex（例: 茶色、FF8800）`,clearCustomColor:`カスタム色をクリア`,noCloudPresets:`クラウドプリセットがありません。Bambu Cloudにログインして同期してください。`,noPresetsAvailable:`プリセットがありません。Bambu Cloudにログインするか、ローカルプロファイルをインポートしてください。`,noMatchingPresets:`一致するプリセットが見つかりません。`,custom:`カスタム`,builtin:`内蔵`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`設定をプリンターに送信しました`,filamentProfile:`フィラメントプロファイル`,kProfileLabel:`Kプロファイル（Pressure Advance）`,filteringFor:`フィルター中: {{material}}`,noKProfile:`Kプロファイルなし（デフォルト0.020を使用）`,noMatchingKProfiles:`一致するKプロファイルが見つかりません。デフォルトK=0.020が使用されます。`,otherKProfiles:`このプリンターの他のKプロファイル`,selectFilamentFirst:`まずフィラメントプロファイルを選択してください`,kFromCalibration:`K={{value}}（プリンターキャリブレーションから）`,customColorLabel:`カスタム色（オプション）`,presetColors:`{{name}}の色：`,showLessColors:`色を減らす`,showMoreColors:`色をもっと表示`,clear:`クリア`,hexLabel:`16進: #{{hex}}`,resetting:`リセット中...`,resetSlot:`スロットをリセット`,cancel:`キャンセル`,configuring:`設定中...`,configureSlot:`スロットを設定`},githubBackup:{title:`Gitバックアップ`,history:`履歴`,downloadBackup:`バックアップをダウンロード`,restoreBackup:`バックアップを復元`,noBackupsYet:`バックアップはまだありません`},emailSettings:{placeholders:{fromName:`Bambuddy`}},tagManagement:{searchTags:`タグを検索...`,renameTag:`タグ名を変更`,deleteTag:`タグを削除`},notificationTemplates:{placeholders:{title:`通知タイトル...`,body:`通知本文...`}},batchTag:{placeholders:{newTag:`新しいタグを入力...`}},photoGallery:{deletePhoto:`写真を削除`},filamentHoverCard:{copySpoolUuid:`スプールUUIDをコピー`},kProfilesView:{hasNote:`メモあり`,copyProfile:`プロファイルをコピー`},layout:{openMenu:`メニューを開く`,noPermissionSystemInfo:`システム情報を表示する権限がありません`},dashboard:{dragToReorder:`ドラッグして並べ替え`,hideWidget:`ウィジェットを非表示`},notificationProviderCard:{deleteNotificationProvider:`通知プロバイダーを削除`},fileManagerModal:{closeFileManager:`ファイルマネージャーを閉じる`,sortFiles:`ファイルを並べ替え`,goToParentFolder:`親フォルダーへ移動`,threeView:`3Dビュー`},embeddedCameraViewer:{refreshStream:`ストリームを更新`,close:`閉じる`,zoomOut:`ズームアウト`,resetZoom:`ズームをリセット`,zoomIn:`ズームイン`,dragToResize:`ドラッグしてサイズ変更`},timelapseViewer:{skipBack5s:`5秒戻る`,skipForward5s:`5秒進む`},notificationProviders:{descriptions:{email:`SMTP電子メール通知`,telegram:`Telegramボット経由の通知`,discord:`Webhookを介してDiscordチャンネルに送信`,ntfy:`無料でセルフホスト可能なプッシュ通知`,pushover:`シンプルで信頼性の高いプッシュ通知`,callmebot:`CallMeBot経由の無料WhatsApp通知`,webhook:`任意のURLへのジェネリックHTTP POST`}},logViewer:{searchPlaceholder:`メッセージまたはロガー名を検索...`,noLogEntries:`ログエントリが見つかりません`},switchbarPopover:{noSwitchesInSwitchbar:`スイッチバーにスイッチがありません`},projectPageModal:{placeholders:{title:`タイトル`,designer:`デザイナー`,license:`ライセンス`,description:`説明を入力...`,profileTitle:`プロファイルタイトル`,profileDescription:`プロファイルの説明...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`待機中`,justNow:`たった今`,now:`今すぐ`,minsAgo:`{{count}}分前`,inMins:`あと{{count}}分`,hoursAgo:`{{count}}時間前`,inHours:`あと{{count}}時間`,daysAgo:`{{count}}日前`,inDays:`あと{{count}}日`},spoolbuddy:{nav:{dashboard:`ダッシュボード`,ams:`AMS`,inventory:`インベントリ`,writeTag:`書込み`,settings:`設定`},status:{nfcReady:`NFC準備完了`,nfcOff:`NFCオフ`,offline:`オフライン`,online:`オンライン`,noPrinters:`プリンターなし`,deviceOffline:`デバイスオフライン`,waitingConnection:`デバイス接続を待っています...`,systemReady:`システム準備完了`,status:`ステータス`},dashboard:{readyToScan:`スキャン準備完了`,idleMessage:`スプールを計量台に置いて識別します`,nfcHint:`NFCタグは自動的に読み取られます`,device:`デバイス`,syncWeight:`重量同期`,weightSynced:`同期完了！`,unknownTag:`不明なタグ`,newTag:`新しいタグを検出`,onScale:`計量中`,linkSpool:`スプールにリンク`,linkTagTitle:`タグをスプールにリンク`,linkTag:`タグをリンク`,selectSpool:`このタグにリンクするスプールを選択:`,noUntagged:`タグなしのスプールが見つかりません`,tagDetected:`タグ検出`,noTag:`タグなし`,tagId:`タグ`,grossWeight:`総重量`,spoolSize:`スプールサイズ`,close:`閉じる`,currentSpool:`現在のスプール`,plateReady:`プレート準備完了: {{name}}`,plateReadyLabel:`片付け待ちプレート`,plateClearAction:`片付け`,plateClearedToast:`プレートを片付け済みにしました`,plateClearFailed:`プレートを片付け済みにできませんでした`},modal:{spoolDetected:`スプール検出`,assignToAms:`AMSに割り当て`,syncWeight:`重量同期`,weightSynced:`同期完了！`,syncing:`同期中...`,newTagDetected:`新しいタグを検出`,addToInventory:`インベントリに追加`,assignToAmsTitle:`AMSに割り当て`,selectSlot:`スロットを選択`,assign:`割り当て`,assigning:`割り当て中...`,assignSuccess:`割り当て完了！`,assignPendingInsert:`割り当てました。スプールを挿入したときにスロットが設定されます。`,assignError:`スプールの割り当てに失敗しました。再試行してください。`,noPrinterSelected:`プリンターを選択...`,noAmsDetected:`このプリンターにAMSが検出されません`,slot:`スロット`},weight:{noReading:`読み取りなし`,stable:`安定`,measuring:`計測中...`,tare:`風袋引き`,calibrate:`キャリブレーション`},spool:{remaining:`残量`,material:`素材`,brand:`ブランド`,color:`色`,coreWeight:`コア`,labelWeight:`ラベル`,scaleWeight:`計量`,netWeight:`正味`,lastUsed:`最終使用`,unknownColor:`不明な色`},ams:{noData:`AMSが検出されません`,connectAms:`AMSを接続してスロットを表示`,noPrinter:`プリンター未選択`,selectPrinter:`上部バーからプリンターを選択`,printerDisconnected:`プリンター切断`,humidity:`湿度`,level:`レベル`,active:`アクティブ`,slot:`スロット`,empty:`空`},inventory:{search:`スプールを検索...`,empty:`インベントリにスプールがありません`,noResults:`一致するスプールがありません`,spools:`スプール`,addSpool:`スプール追加`},settings:{tabDevice:`デバイス`,tabDisplay:`ディスプレイ`,tabScale:`計量`,tabUpdates:`アップデート`,nfcReader:`NFCリーダー`,type:`タイプ`,connection:`接続`,notConnected:`該当なし`,deviceInfo:`デバイス情報`,hostname:`ホスト`,uptime:`稼働時間`,brightness:`明るさ`,saved:`保存済み`,noBacklight:`DSIバックライトが検出されませんでした。明るさ制御にはDSIディスプレイが必要です。`,screenBlank:`画面オフタイムアウト`,screenBlankDesc:`操作がないと画面がオフになります。タッチで復帰。`,displayNote:`明るさはソフトウェアフィルターとして適用されます。`,scaleCalibration:`計量キャリブレーション`,currentWeight:`現在の重量`,tareOffset:`風袋`,calFactor:`係数`,knownWeight:`既知の重量`,calStep1:`計量台からすべてのアイテムを取り除き、ゼロ設定を押してください。`,calStep2:`既知の重量を計量台に置いてください。`,setZero:`ゼロ設定`,calibrateNow:`キャリブレーション`,calibrated:`キャリブレーション済み`,tareSet:`風袋コマンドを送信しました。デバイスを待っています...`,tareComplete:`風袋が完了しました！`,tareTimedOut:`風袋がタイムアウトしました — SpoolBuddy デーモンは起動していますか？`,tareFailed:`風袋コマンドの送信に失敗しました`,zeroSet:`ゼロ点を設定しました。既知の重量を計量台に置いてください。`,calibrationDone:`キャリブレーション完了！`,calibrationFailed:`キャリブレーションに失敗しました`,lastCalibrated:`最終キャリブレーション`,stable:`安定`,settling:`安定化中...`,firmware:`ファームウェア`,scale:`計量`,noDevice:`SpoolBuddyデバイスが見つかりません`,daemonVersion:`デーモンバージョン`,currentVersion:`現在`,versionPending:`デーモンを待っています...`,checking:`確認中...`,checkUpdates:`アップデートを確認`,updateAvailable:`アップデートあり`,updateInstructions:`SSH経由で更新：SpoolBuddyインストールスクリプトを実行してください。`,upToDate:`最新です`,includeBeta:`ベータ版を含む`,systemConfig:`バックエンドと認証`,backendUrl:`BambuddyバックエンドURL`,apiToken:`APIトークン`,apiTokenPlaceholder:`APIトークンを入力`,saveConfig:`設定を保存`,systemQueued:`設定をキューに追加しました。`,systemFieldsRequired:`バックエンドURLは必須です。`,nfcDiagnostic:`NFC診断`,scaleDiagnostic:`スケール診断`,readTagDiagnostic:`タグ読み取り診断`,testNfc:`リーダーをテスト`,testScale:`精度をテスト`,testReadTag:`タグを読み取り`},writeTag:{tabExisting:`既存のスプール`,tabNew:`新規スプール`,tabReplace:`タグ交換`,searchPlaceholder:`素材、色、ブランドで検索...`,noUntaggedSpools:`タグなしのスプールがありません`,noTaggedSpools:`タグ付きのスプールがありません`,selectSpool:`スプールを選択し、NTAGをリーダーに置いてください`,placeTag:`NTAGをリーダーに置いてください`,tagReady:`タグ検出 — 書込み準備完了`,writeTag:`タグ書込み`,replaceTag:`タグ交換`,writing:`タグ書込み中...`,waiting:`SpoolBuddyを待機中...`,writeSuccess:`タグの書込みが完了しました！`,writeFailed:`書込み失敗`,queueFailed:`書込みコマンドのキューに失敗しました`,tryAgain:`再試行`,cancel:`キャンセル`,replaceWarning:`古いタグのリンクが解除され、新しいタグに置き換わります。`,deviceOffline:`SpoolBuddyはオフラインです`,material:`素材`,colorName:`色名`,color:`色`,brand:`ブランド`,weight:`重量 (g)`,createSpool:`スプール作成`,creating:`作成中...`,spoolCreated:`スプール作成完了！書込み準備ができました。`,createFailed:`スプールの作成に失敗しました`,incompleteDataWarning:`不完全なSpoolmanデータでタグを書き込みました`},quickMenu:{printerPower:`プリンター電源`,systemControls:`システム`,restartDaemon:`デーモン再起動`,restartBrowser:`ブラウザ再起動`,reboot:`再起動`,shutdown:`シャットダウン`,swipeToClose:`下にスワイプして閉じる`,confirmTitle:`確認`,confirmShutdown:`SpoolBuddyをシャットダウンしますか？再起動するには物理的なアクセスが必要です。`,confirmReboot:`SpoolBuddyを再起動しますか？`,confirmRestartDaemon:`SpoolBuddyデーモンを再起動しますか？NFCとスケールが一時的に使用できなくなります。`,confirmRestartBrowser:`キオスクブラウザを再起動しますか？画面が一時的に暗くなります。`,confirm:`確認`,confirmPlugOn:`{{name}}をオンにしますか？`,confirmPlugOff:`{{name}}をオフにしますか？`,turnOn:`オン`,turnOff:`オフ`}},diagnostic:{modalTitle:`接続診断 — {{name}}`,running:`診断を実行中...`,runningElapsed:`診断を実行中... ({{elapsed}}秒)`,waitingForReportHint:`プリンターがステータスレポートを送信するのを待っています — 最大 {{max}} 秒かかる場合があります。`,runFailed:`診断を実行できませんでした: {{error}}`,retry:`再実行`,runButton:`診断を実行`,sectionTitle:`接続診断`,sectionDescription:`プリンターが接続できない、または印刷できない原因を確認します — ポートの到達性、LAN開発者モード、Dockerネットワークモード、認証情報。`,noPrinters:`プリンターが設定されていません。`,overall:{ok:`問題は見つかりませんでした — プリンター接続は正常のようです。`,warnings:`プリンターは動作するはずですが、いくつかの点に注意が必要です。`,problems:`プリンターが接続できない、または印刷できない原因となる問題が見つかりました。`},check:{port_mqtt:{title:`制御ポート (MQTT 8883)`,pass:`到達可能 — プリンターは制御接続を受け付けています。`,fail:`ポート8883に到達できません。プリンターの電源が切れている、IPアドレスが異なる、またはファイアウォールがブロックしています。プリンターのIPと、ポート8883が何にもブロックされていないことを確認してください。`},port_ftps:{title:`ファイル転送ポート (FTPS 990)`,pass:`到達可能 — 印刷ファイルの送信は機能します。`,warn:`ポート990に到達できません。監視は引き続き機能する場合がありますが、プリンターへの印刷送信は失敗します。ポート990がブロックされていないことを確認してください。`,warn_no_tls:`ポート990は開いていますが、プリンターのファイルサービスがTLSハンドシェイクを完了しません。印刷ファイル、サムネイル、タイムラプスを取得できないため、アーカイブは空のままになります。プリンターを再起動してください — ポートのブロックを解除しても解決しません。`},external_storage:{title:`送信ファイルを外部ストレージに保存 (インストール手順4)`,pass:`プリンターはこのオプションが有効と報告しています — 送信されたファイルはSDカードに保存され、アーカイブにはサムネイルとスライサーメタデータが含まれます。`,fail:`プリンターはこのオプションが無効と報告しています。「送信ファイルを外部ストレージに保存」を有効にしてください — 新しいファームウェア (P2S 01.02 / Bambu Studio 2.6以降) ではプリンター本体の印刷設定にトグルがあります。古いバージョンでは Bambu Studio / OrcaSlicer のデバイスタブにあります。この設定がないと、アーカイブされた印刷にはサムネイルもスライサーメタデータも残りません。`,skip:`未確認 — アクティブなMQTT接続が必要です。古いスライサーでこの設定がスライサー側のみに存在する場合、プリンターはそれを報告しないため、オプションが無効でもこのチェックは通過します — インストール手順4を手動で確認してください。`,skip_unsupported_model:`このモデルにはSDスロットがありますが、オプションを有効にする方法がありません — 現在のP1シリーズのファームウェアはBambu Studioにトグルを表示せず、プリンターに画面もありません。ここで修正すべきことはありません。Bambu Labがファームウェアで対応するまで、アーカイブされた印刷にはサムネイルやスライサーのメタデータが欠ける場合があります。`,fail_no_media:`オプションは有効ですが、プリンターのスロットにカードもUSBメモリも検出されないため、送信ファイルの保存先がありません。挿入して再度印刷してください。それまでアーカイブされる印刷にはサムネイルとスライサーメタデータがありません。`,warn_internal_storage:`オプションは有効でストレージも装着されていますが、直近の印刷は Bambuddy が読み取れないプリンターの内部ストレージに保存されました。H2 シリーズ、P2S、X2D では、この設定に関係なく Bambu Studio の「印刷」ボタンは常にそちらへ送信します。印刷は名前と時間付きでアーカイブされますが、サムネイルとスライサーのメタデータはありません。完全なアーカイブを残すには、Bambuddy から印刷を開始するか、OrcaSlicer でスライスするか、Bambu Studio で「送信」から「外部ストレージ」を選んだあとに印刷を開始してください。`,warn_internal_history:`オプションは有効でストレージもありますが、直近の印刷はすでにプリンター内にあったファイルから実行されました — 画面からの再印刷、Handy からの開始、または以前に送信したファイルです。そのライブラリは Bambuddy が読めない内部ストレージにあり、この印刷では何も送信されていないため、どの設定を変えても解決しません。名前と時間付きでアーカイブはされますが、サムネイルとスライサーのメタデータはありません。完全なアーカイブにするには、Bambuddy から印刷を開始するか、スライサーから送信してください。`},port_rtsps:{title:`カメラポート ({{protocol}} {{port}})`,pass:`到達可能 — カメラストリームは機能します。`,warn:`ポート{{port}}に到達できません。ライブカメラ表示は機能しません。これは印刷には影響しません。`},macos_local_network:{title:`macOS のローカルネットワーク権限`,pass:`macOS は Bambuddy のローカルネットワークへのアクセスを許可しています。`,warn_unsigned:`Bambuddy を実行している Python にコード署名がないため、macOS はローカルネットワーク権限を結び付ける対象を持てず、プリンターへの接続をエラーも確認ダイアログもなく破棄します。署名を行う Bambuddy の更新スクリプト (install/update_macos.sh) を実行してから、Bambuddy を再起動してください。インタープリター: {{executable}}`,warn_permission:`プリンターの電源が入っていてこのアドレスで到達できる場合は、システム設定 > プライバシーとセキュリティ > ローカルネットワーク を開き、Bambuddy の Python が有効になっているか確認してください。無効だと macOS はローカル接続を無言で破棄します。また Python を更新すると以前の許可が引き継がれないことがあります。`},network_mode:{title:`コンテナのネットワークモード`,genericRuntime:`コンテナ`,pass:`{{runtime}} でホストネットワークを使用して実行中です。`,warn:`Bambuddy は {{runtime}} でブリッジネットワークを使用して実行されています。プリンター検出と仮想プリンターにはホストネットワークが必要です — ホストネットワークでコンテナを再作成してください（docker-compose では "network_mode: host"、Podman では "--network=host"）。`,skip:`コンテナで実行されていません — 該当しません。`,skip_unknown:`Bambuddy は {{runtime}} で実行されていますが、ネットワークモードを判別できませんでした。プリンター検出や仮想プリンターが動作しない場合は、ホストネットワークでコンテナを再作成してください。`,skip_system_container:`Bambuddy は {{runtime}} のシステムコンテナで実行されており、仮想マシンと同様に LAN 上にあります — 該当しません。`},subnet:{title:`ネットワークサブネット`,pass:`プリンターとBambuddyは同じサブネットにあります。`,warn:`プリンター ({{printer_ip}}) とBambuddy ({{host_ip}}) は異なるサブネットにあります。サブネット間のルーティングが設定されていない限り、互いに到達できない可能性があります。`,skip:`サブネットを判定できませんでした — スキップしました。`},mqtt_auth:{title:`プリンター認証情報`,pass:`プリンターが接続を受け入れました。`,fail:`プリンターには到達できますが、Bambuddy は接続されていません。アクセスコードまたはシリアル番号が間違っている可能性が高いです — アクセスコードは LAN のみモードや開発者モードを切り替えるたびに変わるため、プリンター画面から再度コピーしてください。再起動中のプリンターや、同時接続数の上限に達しているプリンターでも同じ表示になります。`,fail_auth_rejected:`プリンターが Bambuddy の認証情報を拒否しました。アクセスコードまたはシリアル番号が間違っています — アクセスコードは LAN のみモードや開発者モードを切り替えるたびに変わります。プリンター画面から再度コピーし、プリンター設定に保存してください。`,skip:`未確認 — プリンターに到達できませんでした。`},developer_mode:{title:`LAN開発者モード`,pass:`開発者モードは有効です。`,fail:`プリンターの開発者モードがオフです。プリンターのLAN設定で有効にし、OKで確定してください。これがないと印刷は開始されません。`,skip:`確認できませんでした — プリンターへのアクティブな接続が必要です。`},printer_publishing:{title:`プリンターがステータスを送信中`,pass:`プリンターはステータス更新を送信しています — AMS、フィラメント、Kプロファイルがスライサーに正しくミラーされます。`,fail:`MQTTブローカーは接続を受け付けましたが、プリンターはステータスレポートを一切送信していません。ほぼ常にシリアル番号の誤りまたは大文字小文字の不一致が原因です — device/<serial>/report トピックは大文字小文字を区別します。プリンター設定のシリアル番号をプリンター本体の画面表示と照合してください。`,skip:`確認できませんでした — プリンターへのアクティブな接続が必要です。`}}},systemHealth:{sectionTitle:`システムの状態`,sectionDescription:`最近のログから既知の問題を検出します。サポートに問い合わせる前に、多くは自分で解決できます。`,rescan:`再スキャン`,clean:`直近 {{times}} 件のログに既知の問題は見つかりませんでした。`,logUnavailable:`ファイルへのログ記録が無効になっているため、ログをスキャンできません。このチェックを使うにはファイルログを有効にしてください。`,learnMore:`対処方法`,fixLabel:`対処:`,occurrences:`{{times}} 回発生 — 最終 {{lastSeen}}`,category:{layer8:`自分で解決できます`,environment:`環境`,bug:`報告してください`},signature:{"ftp-auth-rejected":{name:`プリンターがアクセスコードを拒否しました`,cause:`プリンターがファイル転送のログインを拒否しました。アクセスコードが間違っているか、開発者モードの切り替え後に変更されています。`,fix:`プリンター画面（LAN設定）からアクセスコードをコピーし直し、Bambuddy のプリンター設定で更新してください。`},"ftp-connection-timeout":{name:`ファイル転送の接続がタイムアウトしました`,cause:`Bambuddy がプリンターのファイル転送ポート（FTPS 990）に到達できませんでした。ポートがブロックされているか、プリンターの電源が切れているか、別のサブネットにあります。`,fix:`Bambuddy とプリンターの間でポート 990 がブロックされていないこと、両者が同じネットワークにあることを確認してください。`},"ftp-ssl-error":{name:`セキュアなファイル転送のハンドシェイクに失敗しました`,cause:`プリンターのファイルサービスがポート 990 で TLS を使わずに応答しました。プリンター側のファイルサーバーがハングした状態で、ファイアウォールやファームウェアの問題ではありません。`,fix:`プリンターを再起動してください。それまで印刷ファイル・サムネイル・タイムラプスは取得できませんが、印刷自体には影響ありません。`},"bambu-cloud-captcha":{name:`Bambu Cloud が CAPTCHA を要求しています`,cause:`Bambu の不正利用対策がこのネットワークを検証しているため、Bambu Cloud へのサインインを完了できません。アカウントやこのインストール環境ではなく、グローバル IP アドレスに紐づいた制限です。`,fix:`待つのが基本です。通常は数時間で解除され、サインインを繰り返すと長引きます。それまでは、ブラウザーのセッションから取得したアクセストークンでサインインしてください。`},"mqtt-connection-flapping":{name:`プリンター接続が繰り返し切断されます`,cause:`制御接続（MQTT 8883）が切断と再接続を繰り返しています。通常はネットワークが弱いか、ポートが部分的にブロックされていることが原因です。`,fix:`プリンター付近の Wi-Fi 信号を確認し、できれば有線接続を使用し、ポート 8883 が安定して到達できることを確認してください。`},"camera-connection-refused":{name:`カメラ映像に接続できません`,cause:`ポート RTSPS 322 でライブカメラに到達できませんでした。ポートがブロックされているか、プリンターのカメラまたは LAN ライブビューが無効になっています。`,fix:`プリンターのカメラと LAN ライブビューを有効にし、ポート 322 がブロックされていないか確認してください。これは印刷には影響しません。`},"database-locked":{name:`データベースの書き込み競合`,cause:`負荷時に SQLite データベースで "database is locked" エラーが発生しています。複数のプリンターを同時に使用する場合によく起こります。`,fix:`Bambuddy を外部の PostgreSQL データベースに切り替えてください。ドキュメントの PostgreSQL ガイドを参照してください。`}}},vpDiagnostic:{title:`セットアップチェック — {{name}}`,runButton:`セットアップチェックを実行`,running:`セットアップチェックを実行中...`,runFailed:`セットアップチェックを実行できませんでした: {{error}}`,retry:`再実行`,overall:{ok:`すべてのチェックに合格しました — この仮想プリンターは正しく設定されています。`,warnings:`仮想プリンターは動作するはずですが、いくつかの点に注意が必要です。`,problems:`スライサーがこの仮想プリンターを認識または使用できない理由となる問題が見つかりました。`},check:{enabled:{title:`仮想プリンターが有効`,fail:`この仮想プリンターはオフです。検出可能にするにはオンに切り替えてください。`},running:{title:`サービスが稼働中`,fail:`仮想プリンターは有効ですが、サービスが稼働していません。Bambuddy のログを確認してください — 通常はバインド IP の競合または権限エラーが原因で停止します。`},bind_interface:{title:`バインドネットワークインターフェース`,fail:`バインドインターフェースが設定されていないか、このホストに存在しなくなっています。「バインドインターフェース」のドロップダウンから現在のインターフェースを選択してください。`},access_code:{title:`アクセスコードが設定済み`,fail:`アクセスコードが設定されていません。ここで設定したものと同じ 8 文字のアクセスコードをスライサーに入力する必要があります。`},target_printer:{title:`ターゲットプリンター`,fail:`ターゲットプリンターが選択されていません。プロキシモードには転送先となる実際のプリンターが必要です。`,warn:`ターゲットプリンターは現在オフラインです — 再接続されると転送が再開されます。`},port_ftps:{title:`ファイルアップロードサービス（ポート {{port}}）`,fail:`バインド IP のポート {{port}} で待ち受けているものがないため、スライサーはファイルをアップロードできません。通常はこのインターフェースでのポート競合が原因です。`},port_mqtt:{title:`制御サービス（ポート {{port}}）`,fail:`バインド IP のポート {{port}} で待ち受けているものがないため、スライサーは接続もステータス表示もできません。`},port_bind:{title:`検出サービス（ポート {{port}}）`,fail:`バインド IP のポート {{port}} で待ち受けているものがないため、スライサーの検出ハンドシェイクが失敗します。`},privileged_ports:{title:`特権ポートへのバインド`,fail:`ポート {{port}} は 1024 未満で、このサービスにはバインドする権限がありません。上で何も待ち受けていないのはこのためです。/etc/systemd/system/bambuddy.service に AmbientCapabilities=CAP_NET_BIND_SERVICE を追加して再起動するか、"sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))" を実行してください。Docker の場合は cap_add: [NET_BIND_SERVICE] を追加します。`},certificate:{title:`TLS 証明書`,pass:`証明書の準備ができています。Bambuddy CA 証明書（上記）がスライサーの信頼ストアにインポートされていることを確認してください。`,fail:`この仮想プリンターの TLS 証明書がありません。Bambuddy のデータディレクトリが書き込み可能か確認してください。`}}},bugReport:{logHealthSummary:`ログから既知の問題が見つかりました`,logHealthIntro:`最近のログが既知の問題と一致しています。下記の対処方法をご確認ください。解決すればバグ報告なしで問題が解消する可能性があります。下からバグ報告を送ることもできます。`,title:`バグを報告`,description:`説明`,descriptionPlaceholder:`何が問題でしたか？問題を説明してください...`,email:`メールアドレス（任意）`,emailPlaceholder:`your@email.com`,emailPrivacy:`入力された場合、メールアドレスはGitHub Issueの折りたたみセクションに含まれ、メンテナーがフォローアップできるようになります。`,screenshot:`スクリーンショット`,uploadOrPaste:`画像をアップロード、貼り付け、またはドラッグ`,dataCollectedSummary:`レポートに含まれるデータは？`,dataIncluded:`含まれるもの:`,dataIncludedList:`アプリバージョン、OS、アーキテクチャ、Pythonバージョン、データベース統計（件数のみ）、プリンターモデル、ノズル数、ファームウェアバージョン、接続状態、統合状態（Spoolman、MQTT、HA）、非機密設定、ネットワークインターフェース数、Docker詳細、依存関係バージョン。`,dataNeverIncluded:`含まれないもの:`,dataNeverIncludedList:`プリンター名、シリアル番号、アクセスコード、パスワード、IPアドレス、メールアドレス、APIキー、トークン、Webhook URL、ホスト名、ユーザー名。`,submit:`送信`,startLogging:`デバッグログ開始`,stepEnableLogging:`デバッグログ有効`,stepReproduce:`問題を再現してください`,stepStopLogging:`停止してレポート送信`,stopAndSubmit:`停止して送信`,maxDuration:`{{minutes}}分後に自動停止`,stoppingLogs:`ログ収集・送信中...`,submitting:`バグレポートを送信中...`,submittingStepConnection:`プリンターの接続確認を実行中`,submittingStepVirtualPrinters:`仮想プリンターのセットアップ確認を実行中`,submittingStepLogScan:`最近のログから既知の問題をスキャン中`,submittingStepSubmit:`GitHub にレポートを送信中`,submitSuccess:`バグレポートが正常に送信されました！`,submitFailed:`バグレポートの送信に失敗しました`,diagnosticChecking:`プリンター接続を確認中...`,diagnosticHealthy:`接続チェックに合格しました — プリンターに問題は見つかりませんでした。`,diagnosticSummary:`{{total}} 台中 {{problems}} 台のプリンターに接続の問題があります`,diagnosticIntro:`1 台以上のプリンターに接続の問題があり、それが今回の問題の原因である可能性があります。下記のプリンターを展開して対処法を確認してください — それを解決すれば、バグ報告なしで問題が解決するかもしれません。下記から報告を送信することもできます。`,thankYou:`ありがとうございます！`,submitted:`バグレポートが送信されました。`,viewIssue:`Issueを表示`,closeKeepsRecording:`問題を再現している間、このパネルを閉じても構いません。記録は続行され、再度開くとここに戻ります。`,resumeRecording:`バグレポートを記録中 — {{elapsed}}。クリックして完了します。`,resumeReport:`レポートを再開`,unexpectedError:`予期しないエラーが発生しました`},failureDetection:{title:`AI 失敗検出`,description:`セルフホストされた Obico ML API で印刷を監視し、検出された失敗に自動的に対応します。`,mlUrl:`Obico ML API の URL`,mlUrlHint:`セルフホストした Obico ml_api コンテナのベース URL (例: http://192.168.1.10:3333)。`,mlToken:`ML API トークン（任意）`,mlTokenPlaceholder:`サーバーが ML_API_TOKEN なしで動作している場合は空のままにします`,mlTokenHint:`Obico ml_api コンテナの環境変数 ML_API_TOKEN と一致させる必要があります。コンテナがトークンなしで動作している場合は空のままにしてください。`,test:`テスト`,testSuccess:`ML API に接続でき、正常です。`,testSuccessTokenUnknown:`ML API に接続でき、正常です。トークンは確認できませんでした。`,testFailed:`ML API に接続できませんでした。`,sensitivity:`感度`,sensitivityLow:`低(誤検出が少ない)`,sensitivityMedium:`中(バランス型)`,sensitivityHigh:`高(早期検出、誤検出が増加)`,sensitivityHint:`警告と失敗をトリガーする信頼度のしきい値を調整します。`,action:`失敗検出時の動作`,actionNotify:`通知のみ`,actionPause:`印刷を一時停止`,actionPauseOff:`一時停止して電源を切る`,pollInterval:`ポーリング間隔(秒)`,pollIntervalHint:`印刷中に各プリンターをチェックする頻度。最小 5 秒、最大 120 秒。`,externalUrlMissing:`外部URLが設定されていません。`,externalUrlHint:`ML APIはURLでカメラスナップショットを取得します。MLAPIコンテナがBambuddyに到達できるよう、一般設定で外部URLを設定してください。`,perPrinterTitle:`監視対象プリンター`,perPrinterHint:`検出サービスが監視するプリンターを選択します。`,monitorAll:`接続されているすべてのプリンターを監視`,statusTitle:`ステータス`,serviceRunning:`サービス稼働中`,thresholds:`低 / 高しきい値`,activePrinters:`アクティブな印刷`,noActivePrints:`現在、実行中の印刷はありません。`,historyTitle:`最近の検出`,noHistory:`まだ検出はありません。`},makerworld:{title:`MakerWorld`,description:`MakerWorld モデルの URL を貼り付けると、Bambu Handy アプリを開かなくても Bambuddy から直接インポート・印刷できます。`,pasteUrlHeader:`MakerWorld からインポート`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… または任意の MakerWorld リンク`,resolveButton:`読み込む`,signInRequiredTitle:`ダウンロードには Bambu Cloud へのサインインが必要です`,signInRequiredBody:`モデルの詳細は匿名で閲覧できますが、3MF ファイルをダウンロードするには Bambu Cloud アカウントが必要です。`,signInExpiredTitle:`Bambu Cloud のサインインの有効期限が切れました`,signInExpiredBody:`Bambuddy にはサインインしたままですが、Bambu Lab が保存されたトークンを受け付けなくなったため、ダウンロードは失敗します。Bambu Cloud に再度サインインしてください。`,openCloudSettings:`Cloud 設定を開く`,untitledModel:`無題のモデル`,byCreator:`作成者: {{name}}`,downloadsCount:`ダウンロード数: {{count}}`,licensePrefix:`ライセンス`,alreadyImported:`ライブラリに登録済み`,openOnMakerworld:`MakerWorld で開く`,alreadyInLibrary:`このモデルはすでにライブラリにあります — ファイルマネージャー → MakerWorld で確認できます`,importSuccess:`{{filename}} をインポートしました — ファイルマネージャー → MakerWorld に保存済み`,platesHeader:`プレート ({{count}})`,plateDefaultName:`プレート {{n}}`,materialCount:`フィラメント {{count}} 本`,amsRequired:`AMS が必要`,slicedFor:`{{printer}}用にスライス済み`,alsoCompatible:`互換性ありとも記録: {{printers}}`,importToLibrary:`保存`,sliceIn:`保存して {{slicer}} でスライス`,disclaimer:`MakerWorld 連携はコミュニティで文書化された API エンドポイントを使用しています。Bambuddy は MakerWorld または Bambu Lab との提携・承認関係はありません。`,lastImportSuccess:`ライブラリにインポートしました`,lastImportAlreadyInLibrary:`既にライブラリに存在します`,viewInLibrary:`ファイルマネージャーで表示`,openInBambuStudio:`Bambu Studio で開く`,openInOrcaSlicer:`OrcaSlicer で開く`,importTo:`ファイルマネージャーへのインポート先`,recentImportsHeader:`最近のインポート`,phaseResolving:`解決中`,phaseDownloading:`ダウンロード中`,folderAuto:`MakerWorld (デフォルト)`,importAll:`すべてインポート`,importAllProgress:`インポート中 {{current}}/{{total}}`,openGallery:`画像ギャラリーを開く`,galleryPrev:`前の画像`,galleryNext:`次の画像`,deleteImport:`ライブラリから削除`,importDeleting:`削除中…`,importDeleted:`ライブラリから削除しました`,confirmDelete:`{{filename}} をライブラリから削除しますか？ローカルファイルは削除されますが、MakerWorld から再インポートできます。`,errors:{resolveFailed:`この MakerWorld URL を解決できませんでした。`,downloadFailed:`ダウンロードに失敗しました。もう一度お試しください。`,deleteFailed:`ライブラリからファイルを削除できませんでした。`}},gcodeViewer:{filamentSlot:`フィラメント {{n}}`,loading:`ツールパスを読み込んでいます…`,loadFailed:`このファイルの G コードを読み込めませんでした。`,showTravel:`移動（非押出）`,topLayer:`上端レイヤー`,bottomLayer:`下端レイヤー`,noSource:`プレビューするファイルが指定されていません。`,view:{filament:`フィラメント`,feature:`種別`,height:`高さ`,width:`幅`},feature:{wall:`壁`,sparseInfill:`疎インフィル`,solidInfill:`ソリッドインフィル`,bridge:`ブリッジ／オーバーハング`,support:`サポート`,skirt:`スカート／ブリム`,gapFill:`ギャップ充填`,ironing:`アイロン`,primeTower:`プライムタワー`},back:`戻る`,backToArchives:`印刷アーカイブに戻る`,backToFiles:`ファイル管理に戻る`,plates:`プレート`,plateN:`プレート {{n}}`},libraryTrash:{title:`ゴミ箱`,headerButton:`ゴミ箱`,headerTooltip:`ゴミ箱に移動したファイルを表示`,backToFiles:`ファイルマネージャーに戻る`,subtitleAdmin:`削除されたファイルは {{days}} 日間ゴミ箱に残り、その後自動的に削除されます。このビューには全ユーザーのゴミ箱が表示されます。`,subtitleUser:`削除されたファイルは {{days}} 日間ゴミ箱に残り、その後自動的に削除されます。`,loading:`ゴミ箱を読み込み中…`,loadError:`ゴミ箱を読み込めませんでした。`,empty:`ゴミ箱は空です。`,summary:`{{count}} 件 · {{size}}`,emptyTrash:`ゴミ箱を空にする`,restore:`復元`,purgeNow:`今すぐ削除`,autoPurgeIn:`{{when}} に自動削除`,days:`日`,retentionLabel:`自動削除までの期間`,selectAll:`すべて選択`,selectOne:`{{filename}} を選択`,selectionCount:`{{count}} 件選択中`,bulkRestore:`選択したものを復元`,bulkPurge:`選択したものを削除`,col:{filename:`ファイル`,folder:`フォルダ`,size:`サイズ`,deleted:`ゴミ箱に移動`,autoPurge:`自動削除`,owner:`所有者`,actions:`操作`},confirm:{purgeTitle:`完全に削除しますか？`,purgeBody:`{{filename}} はディスクから削除され、復元できません。`,emptyTitle:`ゴミ箱を空にしますか？`,emptyBody:`{{count}} 件のファイルすべてがディスクから削除されます。この操作は取り消せません。`,bulkPurgeTitle:`選択したファイルを完全に削除しますか？`,bulkPurgeBody:`選択した {{count}} 件のファイルがディスクから削除され、復元できません。`,cta:`完全に削除`},toast:{restored:`ファイルを復元しました。`,restoreFailed:`ファイルを復元できませんでした。`,purged:`ファイルを完全に削除しました。`,purgeFailed:`ファイルを削除できませんでした。`,emptied:`ゴミ箱から {{count}} 件のファイルを削除しました。`,emptyFailed:`ゴミ箱を空にできませんでした。`,retentionSaved:`自動削除を {{days}} 日に設定しました。`,retentionFailed:`保持期間の設定を保存できませんでした。`,bulkRestored:`{{count}} 件のファイルを復元しました。`,bulkPurged:`{{count}} 件のファイルを削除しました。`}},libraryPurge:{title:`古いファイルを一括削除`,headerButton:`古いファイル削除`,headerTooltip:`古いファイルをまとめてゴミ箱に移動`,description:`指定した期間より古いファイルはゴミ箱に移動されます。外部フォルダはスキップされます。自動削除までの間、ゴミ箱から復元できます。`,ageLabel:`次より古いファイルを移動`,days:`日`,includeNeverPrinted:`一度も印刷していないファイルも含める`,effectsTitle:`「削除」をクリックすると何が起こるか`,effect1:`一致するファイルはゴミ箱に移動されます。ディスクからはまだ削除されません。`,effect2:`保持期間が過ぎるまで、いつでもゴミ箱から復元できます。`,effect3:`保持期間が過ぎると、ゴミ箱クリーナーがディスクから完全に削除します。`,effect4:`外部（リンク済み）フォルダー内のファイルはスキップされます — Bambuddyは所有していないバイトを削除しません。`,previewLoading:`対象ファイル数を確認中…`,previewFailed:`プレビューを取得できませんでした。`,previewSummary:`{{count}} 件 · {{size}} がゴミ箱に移動されます`,andMore:`…ほか {{count}} 件`,warning:`ファイルはソフト削除されます — 保持期間が終了するまでゴミ箱から復元できます。`,confirmCta:`{{count}} 件をゴミ箱へ移動`,purging:`ゴミ箱へ移動中…`,toast:{success:`{{count}} 件のファイルをゴミ箱に移動しました。`,failed:`ファイルを削除できませんでした。`}},libraryAutoPurge:{enableLabel:`古いファイルを自動で一括削除`,enableDescription:`管理者の一括削除を 1 日 1 回実行します。ファイルはまずゴミ箱に移動され、すぐには削除されません。`,ageLabel:`次より古いファイルを自動削除`,ageDescription:`最短 7 日、最長 10 年。手動の「古いファイル削除」ボタンと同じ期間ルールを使用します。`,days:`日`,includeNeverPrinted:`一度も印刷していないファイルも含める`,saveFailed:`自動削除の設定を保存できませんでした。`},archivePurge:{headerButton:`古いものを削除`,headerTooltip:`古いアーカイブを一括削除`,title:`古いアーカイブを削除`,description:`古い印刷履歴をクリア。各アーカイブは最新の印刷完了に基づいてエイジングされます — アーカイブを再印刷するとエイジがリセットされるため、現在使用中の作業が削除されることはありません。`,ageLabel:`印刷されていないアーカイブを削除（過去`,days:`日`,effectsTitle:`「削除」をクリックすると何が起こるか`,effect1:`一致するアーカイブはリストから非表示になり、ファイル（3MF、サムネイル、タイムラプス、ソース3MF、F3D、写真）はディスクから削除されます。`,effect2:`アーカイブのレコードはデータベースに残るため、Quick Stats のフィラメント／時間／コスト／エネルギーの寄与は保持されます — 個別アーカイブ削除の既定動作と同じです。`,effect3:`下の「統計からも削除」を有効にすると、Quick Stats の寄与も破棄されます（個別アーカイブ削除のオプションと同等）。この操作は取り消せません。`,effect4:`アーカイブを再印刷するとエイジクロックがリセットされるため、まだ使用中のアーカイブは安全です。`,purgeStatsLabel:`統計からも削除`,purgeStatsHint:`一致するアーカイブを Quick Stats（フィラメント、時間、コスト、エネルギー）からも削除します。チェックしない場合、Quick Stats は寄与を保持し、ファイルのみがディスクから消えます。`,previewLoading:`一致するアーカイブの数を確認中…`,previewFailed:`削除のプレビューを表示できませんでした。`,previewSummary:`{{count}}件のアーカイブ · {{size}}が削除されます`,andMore:`…他に{{count}}件`,warning:`ファイルはディスクから削除され、元に戻せません。続行する前に、保持したいものをダウンロードまたはお気に入りに追加してください。`,confirmCta:`{{count}}件のアーカイブを削除`,purging:`削除中…`,toast:{success:`{{count}}件のアーカイブを削除しました。`,failed:`アーカイブを削除できませんでした。`}},archiveAutoPurge:{enableLabel:`古いアーカイブを自動削除`,enableDescription:`1日1回、しきい値内に印刷されていないアーカイブをリストから非表示にし、ファイルをディスクから削除します。再印刷するとタイマーがリセットされます。`,ageLabel:`印刷されていないアーカイブを自動削除（過去`,ageDescription:`最小7日、最大10年。最新の印刷完了に基づきます — 再印刷するとエイジがリセットされます。3MF、サムネイル、タイムラプス、ソース3MF、F3D、写真を削除します。`,days:`日`,purgeStatsLabel:`統計からも削除`,purgeStatsDescription:`有効にすると、毎日のスイーパーが削除した各アーカイブを Quick Stats（フィラメント、時間、コスト、エネルギー）からも除外します。既定はオフ — Quick Stats は寄与を保持し、ファイルのみがディスクから消えます。`,runNow:`アーカイブを今すぐ削除`,saveFailed:`自動削除設定を保存できませんでした。`},cameraTokens:{scope:{camera_stream:`カメラストリーム`,camwall:`カメラウォール`,overlay:`配信オーバーレイ`},title:`カメラAPIトークン`,navTitle:`カメラAPIトークン`,description:`Home Assistant、Frigate、キオスク画面など、安定した URL を必要とするツールにカメラ映像を埋め込むための長期トークンです。スコープは作成時に選択し、トークンはいつでも取り消せます。`,loading:`読み込み中…`,confirmRevoke:{title:`このトークンを取り消しますか？`,body:`「{{name}}」を使用しているデバイスは直ちにアクセスできなくなります。元に戻せません。`,cancel:`キャンセル`,confirm:`取り消し`},create:{scopeLabel:`スコープ`,hintCameraStream:`カメラストリームトークンで取得できるのは、カメラの映像とスナップショットだけです。Home Assistant や Frigate など、単一のカメラを埋め込む用途に使用してください。`,hintCamWall:`カメラウォールトークンは、ログインなしの画面で /camwall を開きます。各プリンターの名前と状態、そしてカメラ映像を見ることができます。ファイル名、アドレス、アクセスコードは見えません。`,hintOverlay:`配信オーバーレイトークンは、ログインなしの画面で /overlay/{printerId} を開きます — OBS やライブ配信向けです。1台のプリンターのカメラ映像に加え、画面に表示されるファイル名を含むライブの印刷状況を見ることができます。アドレスやアクセスコードは見えません。`,title:`新しいトークンを作成`,nameLabel:`トークン名`,namePlaceholder:`例：Home Assistant`,daysLabel:`有効期限までの日数`,submit:`作成`,hint:`最大有効期間は365日。トークン値は作成時に一度だけ表示されます — 今すぐコピーしてください。`},created:{camWallUrlTitle:`この画面用のカメラウォール URL`,camWallUrlHint:`この URL を画面で開いてください。URL を読める人は誰でもウォールを見られるため、鍵と同じように扱ってください。トークンを取り消すと、その画面は遮断されます。`,overlayUrlTitle:`OBS 用のオーバーレイ URL`,overlayUrlHint:`これを OBS の「ブラウザ」ソース（Browser Source）として追加してください。/overlay/1 の番号を、お使いのプリンターの番号（プリンターページの URL に表示）に変更します。URL を読める人は誰でも配信を見られるため、鍵と同じように扱い、遮断するにはトークンを取り消してください。`,title:`トークンを作成しました – 今すぐコピー`,warning:`このトークンが表示されるのは今回限りです。このダイアログを閉じると二度と表示できません。`,copy:`コピー`,dismiss:`保存しました`},list:{scope:`スコープ`,myTitle:`マイトークン`,allTitle:`全ユーザー（管理者ビュー）`,empty:`トークンはまだありません。`,name:`名前`,owner:`所有者`,prefix:`プレフィックス`,created:`作成`,expires:`有効期限`,lastUsed:`最終使用`,revoke:`取り消し`,expired:`期限切れ`},toast:{created:`トークンを作成しました`,createFailed:`トークンの作成に失敗`,revoked:`トークンを取り消しました`,revokeFailed:`トークンの取り消しに失敗`,loadFailed:`トークンの読み込みに失敗`,copied:`クリップボードにコピー`,copyFailed:`コピーに失敗 – 手動で選択してコピー`}},forecast:{title:`在庫予測`,noSpools:`アクティブなスプールが見つかりません。予測データを表示するには、在庫にスプールを追加してください。`,noUsageData:`使用データがありません — 在庫のタイムラインを予測できません。`,sku:`SKU`,material:`素材`,stock:`在庫`,dailyRate:`レート`,daysLeft:`残り日数`,emptyBy:`在庫切れ予定日`,reorderBy:`発注期限`,actions:`操作`,trend:`トレンド`,estimated:`推定`,noData:`データなし`,timeframe:`期間`,chartTitle:`在庫予測 — 上位5素材`,dashedLinesROP:`破線 = 発注点`,stockLevel:`在庫量`,reorderPoint:`発注点`,safetyMargin:`安全余裕`,trendLegend:`トレンド（履歴ベース、95%サービスレベル）`,estimatedLegend:`推定（重量差分）`,noDataLegend:`データなし`,ropLabel:`発注点`,ssLabel:`安全在庫`,safetyStockLegend:`安全在庫`,stockArrivalLegend:`入荷`,stockoutLegend:`品切れ`,alertCount_one:`{{count}}件の警告`,alertCount_other:`{{count}}件の警告`,order:`注文`,globalLeadTime:`グローバルリードタイム`,globalLeadTimeHint:`グローバルリードタイムの下限 — 全SKUの発注点計算に使用`,save:`保存`,cancel:`キャンセル`,settingsSaved:`設定を保存しました`,failedSaveSettings:`設定の保存に失敗しました`,globalLeadTimeSaved:`グローバルリードタイムを保存しました`,skuLeadTimeOverride:`SKUリードタイム上書き`,skuLeadTimeHint:`0 = グローバルリードタイムを使用。このSKUを上書きするには0より大きい値を設定。`,safetyMarginLabel:`安全余裕`,effectiveLeadTime:`実効リードタイム`,effectiveLeadTimeHint:`max(グローバル {{global}}日, SKU {{sku}}日)`,reorderPointHint:`d̄ × LT + safety margin — 在庫がこのレベルに達したら発注`,safetyMarginHint:`統計的安全在庫 (z=1.65 × σ × √LT) + ユーザー定義バッファ`,safetyMarginHintDays:`統計的安全在庫に加算されるバッファ。{{approx}}`,safetyMarginHintDaysApprox:` ≈ 現在のペースで{{g}}g。`,safetyMarginHintG:`統計的安全在庫に加算される固定重量バッファ。{{approx}}`,safetyMarginHintGApprox:` ≈ 現在のペースで{{days}}日。`,individualSpools:`個別スプール`,labelWeight:`ラベル`,spoolCount_one:`{{count}}個のスプール`,spoolCount_other:`{{count}}個のスプール`,stockBreakRisk:`在庫切れリスク`,stockBreakBefore:`補充前の在庫切れ`,stockBreakDetail:`残り{{days}}日、リードタイム{{lt}}日。`,reorderNow:`今すぐ発注`,reorderTriggerPassed:`発注トリガー日 {{date}} が経過しました。`,shoppingList:`購入リスト`,shoppingListItems_one:`（{{count}}件）`,shoppingListItems_other:`（{{count}}件）`,shoppingListEmpty:`購入リストは空です。行のカートアイコンをクリックしてアイテムを追加してください。`,addToCart:`購入リストに追加`,alertsSnoozed:`このSKUのアラートをミュート`,alertsEnabled:`このSKUのアラートを有効にする`,addedToCart:`買い物リストに追加しました`,failedAddItem:`アイテムの追加に失敗しました`,listView:`リスト`,logisticsView:`ロジスティクス`,qty:`数量`,weight:`重量`,leadTime:`リードタイム`,expectedRestock:`入荷予定日`,status:`ステータス`,note:`メモ`,pending:`保留中`,purchased:`発注済み`,received:`受領済み`,markPurchased:`発注済みとしてマーク`,markReceived:`受領済みとしてマーク — スプールを在庫に追加`,resetToPending:`保留中にリセット`,remove:`削除`,clearAll:`すべてクリア`,downloadCsv:`CSV`,addToCartTitle:`買い物リストに追加`,byQuantity:`数量で`,byDuration:`期間で`,numberOfSpools:`スプール数`,lastHowManyDays:`何日間持つべきですか？`,noUsageQty:`使用データなし — 数量を1に設定しました。`,noteOptional:`メモ（任意）`,notePlaceholder:`例：プロジェクトX用、緊急…`,addNSpools_one:`{{count}}個のスプールを追加`,addNSpools_other:`{{count}}個のスプールを追加`,onArrival:`入荷時`,stockBreakIn:`{{days}}日後に在庫切れ。`,stockRunsOutBefore:`リードタイム{{lt}}日が経過する前に在庫が枯渇します。`,atRate:`{{rate}}g/日のペースでは`,moreSpools_one:`あと{{count}}個のスプール`,moreSpools_other:`あと{{count}}個のスプール`,bridgeGap:`が不足を補うために必要です。`,noReadAccess:`在庫予測を閲覧する権限がありません。`,noWriteAccess:`予測設定を変更する権限がありません。`}}},it:{translation:{nav:{printers:`Stampanti`,archives:`Archivi`,queue:`Coda di stampa`,stats:`Statistiche`,profiles:`Profili`,maintenance:`Manutenzione`,projects:`Progetti`,inventory:`Filamento`,finance:`Finanze`,files:`File`,makerworld:`MakerWorld`,notifications:`Notifiche`,settings:`Impostazioni`,system:`Sistema`,collapseSidebar:`Comprimi barra laterale`,expandSidebar:`Espandi barra laterale`,update:`Aggiorna`,updateAvailable:`Aggiornamento disponibile: v{{version}}`,updateAvailableBanner:`Versione {{version}} disponibile!`,viewUpdate:`Vedi aggiornamento`,viewOnGithub:`Vedi su GitHub`,keyboardShortcuts:`Scorciatoie da tastiera (?)`,switchToLight:`Passa a tema chiaro`,switchToDark:`Passa a tema scuro`,switchToSystem:`Passa a tema di sistema`,smartSwitches:`Interruttori Smart`,logout:`Esci`,installApp:`Installa app`,installAppSuccess:`Bambuddy è stato installato`},common:{plusNMore:`+{{count}} altri`,save:`Salva`,saving:`Salvataggio...`,cancel:`Annulla`,delete:`Elimina`,edit:`Modifica`,add:`Aggiungi`,close:`Chiudi`,confirm:`Conferma`,loading:`Caricamento...`,error:`Errore`,errorLoading:`Errore di caricamento`,retry:`Riprova`,success:`Successo`,warning:`Avviso`,enabled:`Abilitato`,disabled:`Disabilitato`,yes:`Si`,no:`No`,on:`On`,off:`Spento`,all:`Tutti`,none:`Nessuno`,search:`Cerca`,filter:`Filtro`,sort:`Ordina`,refresh:`Aggiorna`,download:`Scarica`,upload:`Carica`,uploading:`Caricamento...`,uploadFailed:`Caricamento fallito`,actions:`Azioni`,status:`Stato`,name:`Nome`,description:`Descrizione`,date:`Data`,time:`Ora`,hours:`ore`,minutes:`minuti`,seconds:`secondi`,days:`giorni`,enable:`Abilita`,disable:`Disabilita`,permissions:`Permessi`,noPrinters:`Nessuna stampante configurata`,noData:`Nessun dato disponibile`,linkNotFound:`Link non trovato`,required:`Obbligatorio`,optional:`Opzionale`,dismiss:`Chiudi`,apply:`Applica`,reset:`Reimposta`,export:`Esporta`,import:`Importa`,clear:`Pulisci`,selectAll:`Seleziona tutto`,deselectAll:`Deseleziona tutto`,noChange:`— Nessun cambio —`,unchanged:`Invariato`,unassigned:`Non assegnato`,unknown:`Sconosciuto`,unknownError:`Errore sconosciuto`,today:`Oggi`,tomorrow:`Domani`,asap:`ASAP`,overdue:`Scaduto`,now:`Ora`,collapse:`Comprimi`,expand:`Espandi`,previous:`Precedente`,next:`Successivo`,viewArchive:`Vedi archivio`,viewInFileManager:`Vedi nel Gestore file`,addedBy:`Aggiunto da {{username}}`,prints:`stampe`,more:`+{{count}} altre`,ascending:`Crescente`,descending:`Decrescente`,back:`Indietro`,copy:`Copia`,copied:`Copiato!`,printer:`Stampante`,remove:`Rimuovi`,type:`Tipo`,print:`Stampa`,rename:`Rinomina`,move:`Sposta`,create:`Crea`,duplicate:`Duplica`,left:`Sinistra`,right:`Destra`,user:`Utente`,run:`Esegui`,running:`In esecuzione...`},finance:{allTypes:`Tutti i tipi`,allCostCenters:`Tutti i centri di costo`,title:`Finanza`,subtitle:`Portafoglio, transazioni personali e centri di costo`,noAccess:`Non hai il permesso di visualizzare i dati finanziari.`,personalView:`Vista personale`,adminView:`Vista amministratore`,createCostCenter:`Crea centro di costo`,adjustWallet:`Regola portafoglio`,addManualPrint:`Aggiungi stampa manuale`,manageMembers:`Gestisci membri del centro di costo`,currentBalance:`Saldo personale`,transactions:`Transazioni`,personalTransactions:`Transazioni personali`,costCenters:`Centri di costo`,availableForPrinting:`Disponibile per l'assegnazione stampa`,costCenterName:`Nome`,budgetType:`Tipo di budget`,monthlyBudget:`Budget mensile`,totalBudget:`Budget totale`,noBudget:`Nessun budget`,create:`Crea`,selectUser:`Seleziona utente`,transactionType:`Tipo`,amount:`Importo`,noCostCenter:`Nessun centro di costo`,descriptionOptional:`Descrizione (facoltativa)`,applyAdjustment:`Applica rettifica`,memberCanPrint:`Il membro può stampare`,addMember:`Aggiungi membro`,canPrint:`Può stampare`,noMembers:`Nessun membro assegnato.`,editCostCenter:`Modifica centro di costo`,myCostCenters:`I miei centri di costo`,costCentersHint:`Controlla i limiti di budget e mantieni i costi sotto controllo`,noCostCenters:`Nessun centro di costo trovato.`,owner:`Proprietario`,balance:`Saldo conto`,unlimited:`Illimitato`,budgetPolicyHint:`I saldi dei conti registrano i costi. La stampa è limitata solo dal budget del centro di costo selezionato; senza budget è illimitata.`,budget:`Budget`,shared:`Condiviso`,cannotEditPrivateCostCenter:`I centri di costo privati non possono essere modificati qui`,recentTransactions:`Transazioni recenti`,transactionsHint:`Filtra per tipo e centro di costo`,first:`Prima`,prev:`Precedente`,next:`Successiva`,last:`Ultima`,pageNumberOf:`Pagina {{page}} di {{total}}`,noTransactions:`Nessuna transazione disponibile.`,noTransactionsForFilter:`Nessuna transazione corrisponde ai filtri selezionati.`,costCenter:`Centro di costo`,balanceAfter:`Saldo successivo`,userWithId:`Utente #{{id}}`,partial:`Parziale`,editTransaction:`Modifica transazione`,selectCostCenter:`Seleziona centro di costo...`,costCenterRequired:`Si prega di selezionare un centro di costo`,amountExample:`es. 4,00`,manualAdjustmentExample:`es. Rettifica manuale`,userRequired:`Si prega di selezionare un utente`,amountInvalid:`L'importo deve essere un numero valido`,createdCostCenter:`Centro di costo creato`,createCostCenterFailed:`Impossibile creare il centro di costo`,transactionDeleted:`Transazione eliminata`,deleteTransactionFailed:`Impossibile eliminare la transazione`,transactionEdited:`Transazione aggiornata e ledger ricalcolato`,editTransactionFailed:`Impossibile modificare la transazione`,manualPrintCreated:`Addebito stampa manuale aggiunto e ledger ricalcolato`,manualPrintFailed:`Impossibile creare la stampa manuale`,memberSaved:`Membro salvato`,memberSaveFailed:`Impossibile salvare il membro`,memberRemoved:`Membro rimosso`,memberRemoveFailed:`Impossibile rimuovere il membro`,costCenterNameRequired:`Il nome del centro di costo è obbligatorio`,costCenterUpdated:`Centro di costo aggiornato`,costCenterUpdateFailed:`Impossibile aggiornare il centro di costo`,confirmDeleteCostCenter:`Eliminare il centro di costo "{{name}}"?`,costCenterDeleted:`Centro di costo eliminato`,costCenterDeleteFailed:`Impossibile eliminare il centro di costo`,deleteTransactionConfirm:`Eliminare questa transazione? I saldi verranno ricalcolati automaticamente.`,deposit:`Deposito`,withdraw:`Prelievo`,printCharge:`Addebito stampa`,deleteTransaction:`Elimina transazione`},printers:{addPreflight:{checking:`Verifica della connessione...`,warning:`Alcuni controlli di connessione non sono riusciti. Questa stampante potrebbe risultare offline. Controlla le verifiche qui sotto, risolvi ciò che puoi oppure salva comunque.`,back:`Indietro`,saveAnyway:`Salva comunque`},title:`Stampanti`,addPrinter:`Aggiungi Stampante`,editPrinter:`Modifica Stampante`,deletePrinter:`Elimina Stampante`,printerName:`Nome Stampante`,serialNumber:`Numero Seriale`,ipAddress:`Indirizzo IP`,accessCode:`Codice di Accesso`,model:`Modello`,nozzleCount:`Numero Ugelli`,autoArchive:`Auto Archiviazione`,status:{available:`Disponibile`,idle:`Inattiva`,printing:`In stampa`,paused:`In pausa`,offline:`Offline`,problem:`Problema`,error:`Errore`,finished:`Finita`,unknown:`Sconosciuto`},temperatures:{nozzle:`Ugello`,bed:`Piatto`,chamber:`Camera`},heaterHistory:{title:`Storico riscaldatori`,openLabel:`Visualizza storico riscaldatori`,nozzle:`Ugello`,nozzle2:`Ugello 2`,bed:`Piatto`,chamber:`Camera`,error:`Caricamento storico fallito`,empty:`Nessun dato registrato`},progress:`{{percent}}% completato`,timeRemaining:`{{time}} rimanente`,deleteConfirm:`Sei sicuro di eliminare "{{name}}"?`,maintenanceOk:`Manutenzione OK`,maintenanceWarning:`{{count}} avviso`,maintenanceWarning_plural:`{{count}} avvisi`,maintenanceDue:`{{count}} in scadenza`,maintenanceDue_plural:`{{count}} in scadenza`,sort:{name:`Nome`,status:`Stato`,model:`Modello`,location:`Posizione`,eta:`Tempo rimanente`,ascending:`Ordina crescente`,descending:`Ordina decrescente`},cardSize:{small:`Schede piccole`,medium:`Schede medie`,large:`Schede grandi`,extraLarge:`Schede extra grandi`},pageView:{openCamWallPage:`Apri il muro telecamere come pagina`,cards:`Schede`,camWall:`Muro telecamere`},camWall:{page:{tokenRejected:`Questo link al muro telecamere non è più valido. Il token potrebbe essere scaduto o essere stato revocato.`,loadFailed:`Impossibile caricare le stampanti.`},noPrinters:`Nessuna stampante da mostrare`,noSignal:`Nessun segnale`,live:`Live`,snap:`Foto`,off:`Spento`,summary:`{{live}} live, {{snap}} foto, {{total}} totali`,layer:`Strato {{cur}}/{{total}}`,timeLeft:`{{time}} rimanenti`,statusMode:{off:`Off`,compact:`Compatto`,full:`Completo`},settings:{title:`Impostazioni muro telecamere`,maxLive:`Max stream live`,maxLiveHint:`Quante tessere trasmettono in live contemporaneamente. Le altre si aggiornano come foto.`,snapshotInterval:`Intervallo foto (secondi)`,snapshotIntervalHint:`Con quale frequenza le tessere non live scaricano una nuova foto.`,statusOverlay:`Overlay di stato`,statusOverlayHint:`Compatto: solo badge di stato. Completo: + avanzamento, strato, tempo residuo.`}},hideOffline:`Nascondi offline`,nextAvailable:`Prossima disponibile`,powerOn:`Accendi`,offlinePrintersWithPlugs:`Stampanti offline con smart plug`,noPrintersConfigured:`Nessuna stampante configurata`,search:`Cerca stampanti...`,noSearchResults:`Nessuna stampante corrisponde alla tua ricerca o ai tuoi filtri`,filter:{allStatuses:`Tutti gli stati`,allLocations:`Tutti i luoghi`},toolbar:{filters:`Filtri`,view:`Vista`,actions:`Azioni`},readyToPrint:`Pronta a stampare`,external:`Esterna`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Elimina archivi stampa`,noLabel:`Nessuna etichetta`,printPreview:`Anteprima stampa`,width:`Larghezza`,height:`Altezza`,noObjectsFound:`Nessun oggetto trovato`,objectsLoadedOnPrintStart:`Gli oggetti sono caricati quando inizia una stampa`,willBeSkipped:`Verra saltato`,name:`Nome`,serialCannotBeChanged:`Il numero seriale non può essere cambiato`,locationHelp:`Usato per raggruppare stampanti e filtrare i lavori in coda`,wifiSignal:{veryWeak:`Molto debole`,weak:`Debole`,fair:`Discreto`,good:`Buono`,excellent:`Eccellente`},maintenanceUpToDate:`Tutta la manutenzione aggiornata - Clicca per vedere`,maintenance:{title:`In manutenzione`,subtitle:`Questa stampante è in pausa — non connessa, non idonea per la coda, nessuna notifica inviata.`,pillLabel:`Manutenzione`,exitButton:`Esci dalla manutenzione`,menuEnter:`Entra in modalità manutenzione`,menuExit:`Esci dalla modalità manutenzione`,toastEntered:`{{name}} è ora in modalità manutenzione`,toastExited:`{{name}} è di nuovo online`,confirmMidPrintTitle:`Entrare in modalità manutenzione durante la stampa?`,confirmMidPrintMessage:`{{name}} sta attualmente stampando. Entrare in modalità manutenzione disconnetterà MQTT e fermerà il tracciamento del progresso e le notifiche di completamento per questo lavoro. Continuare?`,editFieldLabel:`Modalità manutenzione`,editFieldHelp:`Quando attivata, questa stampante è in pausa da MQTT, dispatch della coda e notifiche — utile per riparazioni, installazioni Bambuddy parallele o sospensione temporanea.`},chamberLightOn:`Accendi luce camera`,chamberLightOff:`Spegni luce camera`,files:`File`,browseFiles:`Sfoglia file stampante`,autoOffAfterPrint:`Spegnimento automatico dopo stampa`,autoOffExecuted:`Spegnimento automatico eseguito - accendi la stampante per reimpostare`,hmsErrors:`Errori HMS`,viewHmsErrors:`Vedi {{count}} errore(i) HMS`,resume:`Riprendi`,pause:`Pausa`,stop:`Ferma`,camera:`Telecamera`,skipObject:`Salta Oggetto`,reconnect:`Riconnetti`,forceRefresh:`Forza aggiornamento`,forceRefreshSuccess:`Aggiornamento richiesto`,mqttDebug:`Debug MQTT`,printerInformation:`Informazioni stampante`,copyToClipboard:`Copia`,copied:`Copiato!`,state:`Stato`,wifiSignalLabel:`Segnale WiFi`,developerMode:`Modalità sviluppatore`,enabled:`Attivato`,disabled:`Disattivato`,addedOn:`Aggiunta il`,sdCard:`Scheda SD`,inserted:`Inserita`,notInserted:`Non inserita`,totalPrintHours:`Ore di stampa`,activeNozzle:`Attivo: ugello {{nozzle}}`,amsSwitchInletTooltip:`Filament Track Switch IN-{{inlet}} ({{side}}) — alimenta entrambi gli ugelli`,nozzleRack:`Rack Ugelli`,nozzleDocked:`Agganciato`,nozzleMounted:`Montato`,nozzleActive:`Attivo`,nozzleIdle:`Inattivo`,nozzleDiameter:`Diametro`,nozzleType:`Tipo`,nozzleStatus:`Stato`,nozzleFilament:`Filamento`,nozzleWear:`Usura`,nozzleMaxTemp:`Temp Max`,nozzleSerial:`Seriale`,nozzleHardenedSteel:`Acciaio Temprato`,nozzleStainlessSteel:`Acciaio Inox`,nozzleTungstenCarbide:`Carburo di Tungsteno`,nozzleFlow:`Flusso`,nozzleHighFlow:`Alto Flusso`,nozzleStandardFlow:`Standard`,firmwareUpdate:`Aggiornamento Firmware`,firmwareInstructions:`Sul touchscreen della stampante, vai a`,firmwareNav:`Vai a`,settings:`Impostazioni`,firmware:`Firmware`,discoverPrinters:`Trova Stampanti`,searching:`Ricerca...`,manualEntry:`Inserimento manuale`,addFromCloud:`Aggiungi da Cloud`,toast:{printerDeleted:`Stampante eliminata`,missingSpoolAssignment:`Stampa avviata su {{printer}}. Mancano assegnazioni bobina per: {{slots}}`,killSwitchTriggered:`L’interruttore di sicurezza della fatturazione ha arrestato una stampa non autorizzata su {{printer}}: {{filename}}`,billingChargeFailed:`La fatturazione di {{filename}} su {{printer}} non è riuscita. La prenotazione del budget è stata mantenuta; controlla i log del server.`,assignmentVerified:`Filamento caricato nello slot {{slot}} ({{printer}})`,assignmentVerifiedNoKprofile:`Slot {{slot}} su {{printer}} caricato, ma il profilo di calibrazione del flusso (profilo K) non è stato applicato`,assignmentNotConfirmed:`Impossibile confermare l'assegnazione dello slot {{slot}} su {{printer}} — controlla lo slot AMS`,printerAdded:`Stampante aggiunta`,printerUpdated:`Stampante aggiornata`,failedToDelete:`Impossibile eliminare stampante`,failedToAdd:`Impossibile aggiungere stampante`,connectionFailedNotAdded:`Impossibile connettersi alla stampante. Verifica IP, numero di serie e codice di accesso e conferma che la modalità solo LAN sia attiva. La stampante non è stata aggiunta.`,failedToUpdate:`Impossibile aggiornare stampante`,commandSent:`Comando inviato`,failedToSendCommand:`Impossibile inviare comando`,turnedOn:`{{name}} accesa`,failedToPowerOn:`Impossibile accendere {{name}}`,scriptTriggered:`Script avviato`,printStopped:`Stampa fermata`,printPaused:`Stampa in pausa`,printResumed:`Stampa ripresa`,referenceDeleted:`Riferimento eliminato`,detectionAreaSaved:`Area rilevamento salvata`,failedToRunScript:`Impossibile eseguire script`,failedToStopPrint:`Impossibile fermare stampa`,failedToPausePrint:`Impossibile mettere in pausa stampa`,failedToResumePrint:`Impossibile riprendere stampa`,failedToControlChamberLight:`Impossibile controllare luce camera`,failedToSetSpeed:`Impossibile impostare la velocità di stampa`,failedToUpdateSetting:`Impossibile aggiornare impostazione`,failedToSkipObjects:`Impossibile saltare oggetti`,failedToRereadRfid:`Impossibile rileggere RFID`,failedToCheckPlate:`Impossibile controllare piatto`,failedToUpdateLabel:`Impossibile aggiornare etichetta`,failedToDeleteReference:`Impossibile eliminare riferimento`,failedToSaveDetectionArea:`Impossibile salvare area rilevamento`,plateCheckEnabled:`Controllo piatto abilitato`,plateCheckDisabled:`Controllo piatto disabilitato`,calibrationSaved:`Calibrazione salvata!`,calibrationFailed:`Calibrazione non riuscita`,rfidRereadInitiated:`Rilettura RFID avviata`,loadInitiated:`Caricamento filamento…`,unloadInitiated:`Scaricamento filamento…`,failedToLoad:`Caricamento filamento fallito`,failedToUnload:`Scaricamento filamento fallito`},connection:{connected:`Connesso`,offline:`Offline`},plateStatus:{markCleared:`Segna il piatto come liberato`,cleared:`Piatto libero`,notCleared:`Piatto non libero`,inUse:`Piatto in uso`},queue:{inQueue:`{{count}} stampa in coda`,inQueue_plural:`{{count}} stampe in coda`},controls:`Controlli`,rfid:{reread:`Rileggi RFID`},ams:{load:`Carica`,unload:`Scarica`,feedTitle:`Caricare {{slot}} in quale ugello?`,feedPrompt:`Il Filament Track Switch può instradare questo slot verso entrambi gli hotend. Scegli quale alimentare.`,feedLeft:`Ugello sinistro`,feedRight:`Ugello destro`,feedAlreadyLoaded:`Già caricato`,switchNotReady:`Il Filament Track Switch non è ancora configurato. Assegna ogni AMS a un ingresso sulla stampante, poi riprova.`},bedJog:{limitWarning:`I limiti di corsa non vengono applicati durante i movimenti manuali: un bug del firmware Bambu ignora i finecorsa software per i comandi remoti. Muovi con cautela per evitare collisioni.`,title:`Controlli jog`,bed:`Piano`,step:`Passo (mm)`,up:`Sposta piano su`,down:`Sposta piano giù`,toolheadUp:`Sposta testina su`,toolheadDown:`Sposta testina giù`,disabledWhilePrinting:`Disabilitato durante la stampa`,notHomedTitle:`Stampante non azzerata`,notHomedMessage:`La stampante non è stata azzerata dall'ultima stampa. Esegui prima l'azzeramento automatico per un posizionamento sicuro (parcheggia la testa di stampa, poi azzera X, Y e Z), oppure muovi comunque — i finecorsa software verranno ignorati.`,homeZ:`Azzeramento automatico`,moveAnyway:`Muovi comunque`,homingStarted:`Azzeramento automatico in corso…`},permission:{noAdd:`Non hai il permesso di aggiungere stampanti`,noEdit:`Non hai il permesso di modificare stampanti`,noDelete:`Non hai il permesso di eliminare stampanti`,noControl:`Non hai il permesso di controllare stampanti`,noFiles:`Non hai il permesso di accedere ai file stampante`,noAmsRfid:`Non hai il permesso di rileggere AMS RFID`,noSmartPlugControl:`Non hai il permesso di controllare smart plug`,noCamera:`Non hai il permesso di visualizzare le telecamere`},modal:{addTitle:`Aggiungi Stampante`,editTitle:`Modifica Stampante`,myPrinter:`La mia Stampante`,selectModel:`Seleziona modello...`,locationGroup:`Posizione / Gruppo (opzionale)`,locationPlaceholder:`es. Officina, Ufficio, Cantina`,autoArchiveLabel:`Archivia automaticamente stampe completate`,fromPrinterSettings:`Dalle impostazioni della stampante`,modelOptional:`Modello (opzionale)`,saveChanges:`Salva modifiche`},skipObjects:{tooltip:`Salta oggetti`,onlyWhilePrinting:`Salta oggetti (solo durante la stampa)`,requiresMultiple:`Salta oggetti (richiede 2+ oggetti)`,title:`Salta Oggetti`,matchIdsInfo:`Abbina gli ID con il display della stampante`,printerShowsIds:`Lo schermo mostra gli ID oggetto sul piatto`,skipSelected:`Salta selezionati`,skipping:`Saltando...`,noObjectsSelected:`Nessun oggetto selezionato`,selectObjectsToSkip:`Seleziona gli oggetti da saltare nella stampa corrente`,skipped:`saltato`,objectsSkipped:`Oggetti saltati`,activeCount:`{{count}} attivi`,waitForLayer:`Attendi il layer 2+ per saltare oggetti (attualmente layer {{layer}})`,skip:`Salta`,confirmTitle:`Saltare oggetto?`,confirmMessage:`Sei sicuro di voler saltare "{{name}}"? Questa azione non può essere annullata.`,confirmAllMessage:`Sono selezionati tutti gli oggetti rimanenti. Questo interromperà il processo di stampa. Continuare?`,confirmMultipleMessage:`Saltare {{count}} oggetti selezionati? Questa azione non può essere annullata.`},confirm:{deleteTitle:`Elimina Stampante`,deleteMessage:`Sei sicuro di eliminare "{{name}}"? Questo rimuoverà tutte le impostazioni di connessione.`,deleteArchivesNote:`Tutta la cronologia di stampa sarà eliminata definitivamente.`,keepArchivesNote:`La cronologia sarà mantenuta ma non più associata a questa stampante.`,stopTitle:`Ferma Stampa`,stopMessage:`Sei sicuro di fermare la stampa corrente su "{{name}}"? Questo annullerà il lavoro di stampa.`,stopButton:`Ferma Stampa`,pauseTitle:`Pausa Stampa`,pauseMessage:`Sei sicuro di mettere in pausa la stampa corrente su "{{name}}"?`,pauseButton:`Pausa Stampa`,resumeTitle:`Riprendi Stampa`,resumeMessage:`Sei sicuro di riprendere la stampa su "{{name}}"?`,resumeButton:`Riprendi Stampa`,powerOnTitle:`Accendi Stampante`,powerOnMessage:`Sei sicuro di accendere "{{name}}"?`,powerOnButton:`Accendi`,powerOffTitle:`Spegni Stampante`,powerOffMessage:`Sei sicuro di spegnere "{{name}}"?`,powerOffWarning:`AVVISO: "{{name}}" sta stampando! Sei sicuro di spegnere? Questo interromperà la stampa e potrebbe danneggiare la stampante.`,powerOffButton:`Spegni`,haToggleTitle:`Commuta "{{name}}"`,haToggleMessage:`Commutare l'entità Home Assistant {{entity}}? Questo potrebbe spegnere l'alimentazione se attualmente è accesa.`,haToggleWarning:`AVVISO: "{{name}}" sta stampando! La commutazione di {{entity}} potrebbe togliere l'alimentazione e interrompere la stampa. Continuare?`,haToggleButton:`Commuta`},bulk:{select:`Seleziona`,selectAll:`Seleziona tutto`,selectByLocation:`Seleziona per posizione`,selected:`{{count}} selezionato/i`,actions:{stop:`Ferma`,pause:`Pausa`,resume:`Riprendi`,clearPlate:`Svuota piano`,clearHMS:`Cancella notifiche`},confirm:{stopTitle:`Ferma {{count}} stampe`,stopMessage:`Questo annullerà le stampe attive su {{count}} stampante/i. Questa azione non può essere annullata.`,stopButton:`Ferma tutte`,pauseTitle:`Pausa {{count}} stampe`,pauseMessage:`Questo metterà in pausa le stampe attive su {{count}} stampante/i.`,pauseButton:`Pausa tutte`,clearPlateTitle:`Svuota {{count}} piani di stampa`,clearPlateMessage:`Questo svuoterà il piano di stampa su {{count}} stampante/i e potrebbe avviare i lavori in coda.`,clearPlateButton:`Svuota tutti`},success:`{{action}} completato su {{count}} stampante/i`,partial:`{{succeeded}} riuscito/i, {{failed}} fallito/i`,noneApplicable:`Nessuna stampante selezionata è nello stato corretto per questa azione`,selectByState:`Seleziona per stato`},discovery:{title:`Trova Stampanti`,searching:`Ricerca...`,scanning:`Scansione...`,scanProgress:`Scansione... {{scanned}}/{{total}}`,foundPrinters:`Trovate {{count}} stampante(i)`,noPrintersFound:`Nessuna stampante trovata`,noPrintersFoundSubnet:`Nessuna stampante trovata nella sottorete specificata.`,noPrintersFoundNetwork:`Nessuna stampante trovata sulla rete.`,allConfigured:`Tutte le stampanti trovate sono già configurate.`,alreadyAdded:`Già aggiunta`,select:`Seleziona`,manualEntry:`Inserimento manuale`,addFromCloud:`Aggiungi da Cloud`,subnetToScan:`Sottorete da scansionare`,dockerNote:`Docker rilevato. Inserisci la sottorete della stampante in notazione CIDR. Richiede network_mode: host in docker-compose.yml.`,scanSubnet:`Scansiona sottorete per stampanti`,discoverNetwork:`Trova stampanti in rete`,scanningSubnet:`Scansione sottorete per stampanti Bambu...`,scanningNetwork:`Scansione rete...`,serialRequired:`Seriale richiesto`,unknown:`Sconosciuto`,failedToStart:`Avvio ricerca non riuscito`,customSubnetOption:`Sottorete personalizzata...`,customSubnetLabel:`Sottorete personalizzata (CIDR)`,customSubnetNote:`Usa una sottorete personalizzata se la tua stampante è su una rete diversa da questo server. Le porte FTP (990) e MQTT (8883) devono essere raggiungibili attraverso il confine di routing.`},drying:{start:`Avvia essiccazione`,stop:`Ferma essiccazione`,temperature:`Temperatura`,duration:`Durata`,hours:`ore`,timeRemaining:`{{time}} rimanente`,active:`Essiccazione`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`Essiccazione non supportata`,powerRequired:`Collegare l'alimentatore AMS per abilitare l'asciugatura`,cannotDryNow:`L'AMS non può avviare l'asciugatura al momento`,startingDrying:`Avvio essiccazione...`,toastCommandSent:`Comando di essiccazione inviato`,toastStopped:`Essiccazione interrotta`,toastNotStarted:`La stampante ha accettato il comando, ma l'AMS non ha avviato l'essiccazione. Verifica che l'alimentatore dell'AMS sia collegato e che la stampante sia inattiva.`,screenOnly:`Su questa stampante l'essiccazione dell'AMS può essere comandata solo dallo schermo della stampante (limitazione di Bambu)`,stoppingDrying:`Arresto essiccazione...`,rotateTray:`Ruota la bobina durante l'essiccazione`,rotateUnavailableReason:`Non disponibile — uno slot di questo AMS è caricato verso la testa di stampa. La bobina è bloccata dal tubo di alimentazione e non può ruotare. Ritrai prima il filamento.`,startMode:`Ora di avvio`,modeNow:`Ora`,modeDelay:`Dopo un ritardo`,modeAtTime:`A un orario`,schedule:`Pianifica`,scheduledFor:`Asciugatura pianificata per {{time}}`,scheduledAsap:`Asciugatura pianificata (in attesa della stampante)`,cancelScheduled:`Annulla asciugatura pianificata`,scheduleFailed:`Pianificazione dell'asciugatura non riuscita`,retractFilament:`Ritrarre il filamento dall'uscita dell'AMS per avviare l'asciugatura`,waitingAmsNotFound:`In attesa del rilevamento dell'AMS`,waitingOffline:`In attesa che la stampante torni online`,waitingPrinterBusy:`In attesa che la stampante sia libera`,waitingAlreadyDrying:`In attesa che termini il ciclo di asciugatura in corso`,waitingInterrupted:`Interrotta, riprenderà quando la stampante sarà libera`,scheduleFailedReason:`Asciugatura pianificata non riuscita: {{reason}}`,scheduleFailedUnknown:`Errore sconosciuto`,dismissFailed:`Ignora`},amsBackup:{titleOn:`AMS Filament Backup è ATTIVO. Clicca per disabilitare.`,titleOff:`AMS Filament Backup è DISATTIVATO. Clicca per abilitare.`,titleUnknown:`Stato di AMS Filament Backup non disponibile su questa stampante.`,toastEnabled:`AMS Filament Backup abilitato`,toastDisabled:`AMS Filament Backup disabilitato`,modalTitle:`AMS Filament Backup`,modalHelp:`Quando lo slot attivo si esaurisce, la stampante passa agli slot con lo stesso preset e colore in quest'ordine.`,modalNoSlots:`Nessun filamento caricato.`,modalNoPairs:`Nessuna coppia di backup — nessuno slot condivide preset e colore.`,extruderRightShort:`D`,extruderLeftShort:`S`,stateOn:`Abilitato`,stateOff:`Disabilitato`,stateUnknown:`Non supportato su questa stampante`},activeJobSlot:{title:`Questo slot è il filamento {{n}} nella stampa attiva`,ariaLabel:`Slot stampa attiva {{n}}`},expectedSlot:{title:`La stampante è in attesa di filamento in questo slot`,ariaLabel:`Slot filamento previsto {{n}}`,label:`{{ams}} · Slot {{slot}}`,external:`Bobina esterna`},filaments:`Filamenti`,externalSpool:{hide:`Nascondi bobina esterna`,show:`Mostra bobina esterna`},openCameraOverlay:`Apri overlay camera`,openCameraWindow:`Apri camera in nuova finestra`,firmwareUpdateAvailable:`Aggiornamento firmware disponibile: {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — Aggiornato`,firmwareUpdateButton:`Aggiorna`,plateDetection:{noPermission:`Non hai il permesso di aggiornare le stampanti`,enabledClick:`Controllo piatto abilitato - Clicca per disabilitare`,disabledClick:`Controllo piatto disabilitato - Clicca per abilitare`,manageCalibration:`Gestisci calibrazione rilevamento piatto`,calibrationRequired:`Calibrazione richiesta`,calibrationInstructions:`Assicurati che il piatto sia <strong>completamente vuoto</strong>, poi clicca Calibra.`,calibrationDescription:`La calibrazione salva un'immagine di riferimento del piatto vuoto. I controlli futuri confronteranno con questo riferimento per rilevare oggetti.`,calibrationTip:`<strong>Suggerimento:</strong> Puoi salvare fino a 5 calibrazioni per piatti diversi. Il sistema usa automaticamente la migliore corrispondenza durante il controllo.`,plateEmpty:`Il piatto sembra vuoto`,objectsDetected:`Oggetti rilevati sul piatto`,confidence:`Confidenza`,difference:`Differenza`,analysisPreview:`Anteprima analisi:`,analysisLegend:`Riquadro verde = area rilevamento, overlay rosso = differenze dalla calibrazione`,savedReferences:`Riferimenti salvati ({{count}}/{{max}})`,deleteReference:`Elimina riferimento`,labelPlaceholder:`Etichetta...`,clickToEdit:`{{label}} - Clicca per modificare`,clickToAddLabel:`Clicca per aggiungere etichetta`},speed:{title:`Velocità di stampa`,silent:`Silenzioso (50%)`,standard:`Standard (100%)`,sport:`Sport (124%)`,ludicrous:`Ludicrous (166%)`},airduct:{title:`Modalità condotto d'aria`,cooling:`Raffreddamento`,heating:`Riscaldamento`},noSdCard:`Nessuna SD`,door:{open:`Aperta`,closed:`Chiusa`},fans:{partCooling:`Ventola raffreddamento parte`,auxiliary:`Ventola ausiliaria`,leftAuxiliary:`Ventola ausiliaria sinistra`,exhaust:`Estrazione`,chamber:`Ventola camera`},clickToViewHmsErrors:`Clicca per vedere errori HMS`,aiDetection:{safe:`Sicuro`,warning:`Avviso`,failure:`Guasto`,idle:`Inattiva`,error:`Non controlla`,unknown:`Avvio`,tooltipError:`Il rilevamento guasti con IA non sta controllando questa stampa: {{reason}} - clicca per i dettagli`,tooltipUnknown:`Rilevamento guasti con IA: in attesa del primo risultato - clicca per i dettagli`,errorHint:`Questa stampa non viene controllata. Il rilevamento riprenderà automaticamente una volta risolto il problema indicato sotto.`,tooltip:`Rilevamento guasti con IA: {{status}} (punteggio {{score}}) - clicca per i dettagli`,tooltipIdle:`Rilevamento guasti con IA attivo - il monitoraggio inizia con la prossima stampa - clicca per i dettagli`,modalTitle:`Rilevamento guasti con IA - {{name}}`,currentStatus:`Stato`,score:`Punteggio`,framesAnalyzed:`Fotogrammi analizzati`,idleHint:`Al momento nessuna stampa è monitorata. Il monitoraggio inizia automaticamente con la prossima stampa.`,lastError:`Ultimo errore`,openSettings:`Apri impostazioni`},estimatedCompletion:`Tempo completamento stimato`,plateNumber:`Piastra {{number}}`,slotOptions:`Opzioni slot`,amsPopup:{friendlyName:`Nome AMS`,friendlyNamePlaceholder:`es. Nome AMS amichevole`,serialNumber:`Numero di serie`,firmwareVersion:`Firmware`,save:`Salva`,clear:`Cancella`,noEditPermission:`Non hai il permesso di rinominare le unità AMS`},firmwareModal:{title:`Aggiornamento Firmware`,titleUpToDate:`Info Firmware`,currentVersion:`Corrente:`,latestVersion:`Ultima:`,releaseNotes:`Note di rilascio`,checkingPrereqs:`Controllo prerequisiti...`,sdCardReady:`SD pronta. Clicca sotto per caricare firmware.`,uploadedSuccess:`Firmware caricato su SD!`,applyInstructions:`Per applicare l'aggiornamento sulla stampante:`,step1:`Sul touchscreen della stampante, vai a <strong>Impostazioni</strong>`,step2:`Vai a <strong>Firmware</strong>`,step3:`Seleziona <strong>Aggiorna da SD</strong>`,step4:`L'aggiornamento richiede 10-20 minuti`,done:`Fatto`,starting:`Avvio...`,uploadFirmware:`Carica Firmware`,uploadFailed:`Avvio caricamento fallito: {{error}}`,uploadedToast:`Firmware caricato! Avvia aggiornamento dal display.`,availableVersions:`Versioni disponibili`,usable:`Utilizzabile`,unavailable:`Non disponibile`,installed:`Installato`,newerBadge:`più recente`,olderBadge:`più vecchio`,currentBadge:`attuale`},accessCodePlaceholder:`Lascia vuoto per mantenere quello attuale`,roi:{title:`Area di rilevamento (ROI)`,xStart:`X Inizio`,yStart:`Y Inizio`,width:`Larghezza`,height:`Altezza`,instruction:`Regola l'area di rilevamento per focalizzare il piatto. Il riquadro verde mostra l'area corrente.`},developerModeWarning:`La modalità sviluppatore LAN non è attivata su: {{names}}. Alcune funzionalità potrebbero non funzionare.`,howToEnable:`Come attivare`,incompatibleFile:`Questo file è stato preparato per {{slicedFor}}, ma questa stampante è una {{printerModel}}`,dropNotPrintable:`Solo i file .gcode e .gcode.3mf possono essere stampati`,dropToPrint:`Rilascia per stampare`,dropToQueue:`Rilascia per accodare`},archives:{media:{title:`Video della stampa`,download:`Scarica i video della stampa`,searching:`Ricerca dei video sulla stampante…`,searchFailed:`Impossibile cercare i video sulla stampante.`,none:`Non sono stati trovati timelapse o segmenti della videocamera IP per questa stampa.`,attachedTimelapse:`Timelapse allegato`,printerFiles:`File ancora presenti sulla stampante`,downloadSelected:`Scarica selezionati`,printerMissing:`La stampante non è più configurata`,timelapseUnavailable:`Impossibile leggere la cartella dei timelapse`,ipcamUnavailable:`Impossibile leggere la cartella della videocamera IP`},title:`Archivi di stampa`,no3mfBanner:{title:`Alcune stampe recenti non sono state archiviate con la miniatura`,body:`Lo slicer non ha lasciato il file .gcode.3mf sulla scheda SD della stampante, quindi Bambuddy non ha potuto recuperare né la miniatura né i metadati dello slicer. Solitamente accade perché "Memorizza file inviati su archiviazione esterna" è disattivato nello slicer (scheda Dispositivo di Bambu Studio / OrcaSlicer).`,docsLink:`Vedi passo 4 dell'installazione`,docsLinkInternalStorage:`Perché succede`,titleInternalStorage:`Alcune stampe recenti sono rimaste nella memoria interna della stampante`,bodyInternalStorage:`Bambu Studio ha messo il file elaborato nella memoria interna della stampante anziché sulla scheda, quindi Bambuddy non aveva nulla da leggere via FTP. Sulla serie H2, sulla P2S e sulla X2D il pulsante «Stampa» lo fa sempre: solo «Invia» offre una scelta, e anche quella è impostata su «Cache». Quelle stampe restano archiviate con nome e tempi, solo senza miniatura né metadati dello slicer. Per archivi completi, avvia la stampa da Bambuddy oppure elabora in OrcaSlicer, oppure in Bambu Studio usa «Invia» con «Esterna» e avvia la stampa dopo. Tutte richiedono una scheda o una chiavetta nella stampante.`,titleNoExternalStorage:`Alcune stampe recenti non sono state archiviate — nessuna memoria nella stampante`,bodyNoExternalStorage:`La stampante non rileva né scheda né chiavetta nel suo slot, quindi il file elaborato non aveva dove finire e Bambuddy nulla da leggere. Inseriscine una e la prossima stampa verrà archiviata per intero.`,titleInternalHistory:`Alcune stampe recenti sono partite da un file già presente sulla stampante`,bodyInternalHistory:`Quelle stampe sono uscite dalla libreria della stampante stessa: una ristampa dal suo schermo, un avvio da Handy o un file inviato prima e stampato dopo. Bambuddy legge i file di stampa via FTP, che serve solo la scheda o la chiavetta, mentre la stampante tiene quella libreria in un'area che l'FTP non raggiunge, quindi non c'era alcun 3MF da leggere. Nessuna impostazione dello slicer cambia questo, perché per queste stampe non è stato inviato nulla. Restano archiviate con nome e tempi, e «Modifica archivio» consente di inserire a mano il filamento usato. Per un archivio completo, avvia la stampa da Bambuddy o dal tuo slicer.`,titleFtpsCooloff:`Alcune stampe recenti non sono state archiviate — la stampante ha rifiutato la connessione dei file`,bodyFtpsCooloff:`Bambuddy ha aperto la porta di trasferimento file della stampante (FTPS 990) e la stampante ha risposto con qualcosa che non è TLS, quindi non è stato possibile leggere nulla. Quelle stampe restano archiviate con nome e tempi, solo senza miniatura né metadati dello slicer. Non è un'impostazione dello slicer né qualcosa che hai cambiato tu — gli stessi modelli e firmware funzionano normalmente su altre installazioni, e una stampante colpita di solito torna a funzionare da sola più tardi. Dopo un errore simile Bambuddy sospende i trasferimenti verso quella stampante per cinque minuti e ritorna a prendere il file al termine della pausa, così un episodio breve si risolve da sé; una scheda ancora vuota significa che il rifiuto è durato più del secondo tentativo. Non si sa ancora che cosa lo scateni. Se continua a capitare, attiva la registrazione di debug nella pagina Sistema e allega un pacchetto di supporto alla tua segnalazione.`,titleFtpTransferFailed:`Alcune stampe recenti non sono state archiviate: il trasferimento del file ha esaurito il tempo`,bodyFtpTransferFailed:`Il file elaborato era sulla scheda della stampante e la stampante lo ha effettivamente servito, ma il trasferimento non si è concluso nel tempo consentito. All'avvio della stampa la stampante gestisce anche la telecamera, i messaggi di stato e il caricamento del lavoro, e un 3MF di grandi dimensioni non sempre riesce a passare. Quelle stampe restano archiviate con nome e tempi, solo senza miniatura né metadati dello slicer. Non è un'impostazione dello slicer né qualcosa che hai cambiato. Bambuddy torna a prendere il file tre volte nei dieci minuti successivi, quindi la maggior parte dei casi si risolve da sola; una scheda ancora vuota significa che anche tutti quei tentativi hanno esaurito il tempo. Se continua a succedere, aumenta Timeout di connessione in Impostazioni > Rete > Nuovo tentativo FTP.`,dismissLabel:`Chiudi questo avviso`},searchPlaceholder:`Cerca archivi...`,filterByPrinter:`Filtra per stampante`,filterByStatus:`Filtra per stato`,sortBy:`Ordina per`,sortNewest:`Più recenti`,sortOldest:`Meno recenti`,sortName:`Nome`,sortDuration:`Durata`,sortLargest:`Più grandi`,sortSmallest:`Più piccoli`,sortSize:`Dimensione`,noArchives:`Nessun archivio trovato`,noArchivesSearch:`Nessun archivio corrisponde alla ricerca`,originalPrintNotVisible:`Stampa originale non visibile - prova a rimuovere i filtri`,noArchivesYet:`Nessun archivio ancora`,prints:`stampe`,pagination:{showing:`Mostrando`,to:`a`,of:`di`,show:`Mostra`,page:`Pagina`,all:`Tutti`},loadingArchives:`Caricamento archivi...`,releaseToUpload:`Rilascia per caricare`,showAll:`Mostra tutti`,showFavoritesOnly:`Solo preferiti`,gridView:`Vista griglia`,listView:`Vista elenco`,calendarView:`Vista calendario`,logView:`Registro stampe`,manageTags:`Gestisci tag`,showFailedPrints:`Mostra stampe fallite`,hideFailedPrints:`Nascondi stampe fallite`,hideDuplicates:`Nascondi duplicati`,viewOriginalPrint:`Fai clic per visualizzare la stampa originale (#{{id}})`,printTime:`Tempo di stampa`,filamentUsed:`Filamento usato`,cost:`Costo`,preview:`Anteprima`,deleteArchive:`Elimina archivio`,deleteConfirm:`Sei sicuro di eliminare questo archivio?`,favorite:`Preferito`,unfavorite:`Rimuovi dai preferiti`,viewDetails:`Vedi dettagli`,status:{completed:`Completato`,failed:`Fallito`,stopped:`Fermato`},toast:{source3mfAttached:`Sorgente 3MF allegata: {{filename}}`,failedUploadSource3mf:`Caricamento sorgente 3MF non riuscito`,source3mfRemoved:`Sorgente 3MF rimossa`,failedRemoveSource3mf:`Rimozione sorgente 3MF non riuscita`,f3dAttached:`F3D allegato: {{filename}}`,failedUploadF3d:`Caricamento F3D non riuscito`,f3dRemoved:`F3D rimosso`,failedRemoveF3d:`Rimozione F3D non riuscita`,timelapseAttached:`Timelapse allegato: {{filename}}`,timelapseAlreadyAttached:`Timelapse già allegato`,noMatchingTimelapse:`Nessun timelapse corrispondente`,failedScanTimelapse:`Scansione timelapse non riuscita`,failedAttachTimelapse:`Allegato timelapse non riuscito`,timelapseRemoved:`Timelapse rimosso`,failedRemoveTimelapse:`Impossibile rimuovere il timelapse`,timelapseUploaded:`Timelapse caricato: {{filename}}`,failedUploadTimelapse:`Impossibile caricare il timelapse`,archiveDeleted:`Archivio eliminato`,failedDeleteArchive:`Eliminazione archivio non riuscita`,addedToFavorites:`Aggiunto ai preferiti`,removedFromFavorites:`Rimosso dai preferiti`,projectUpdated:`Progetto aggiornato`,failedUpdateProject:`Aggiornamento progetto non riuscito`,linkCopied:`Link copiato negli appunti`,failedCopyLink:`Copia link non riuscita`,photoDeleted:`Foto eliminata`,failedDeletePhoto:`Eliminazione foto non riuscita`,failedDeleteArchives:`Eliminazione archivi non riuscita`,failedUpdateFavorites:`Aggiornamento preferiti non riuscito`,exportDownloaded:`Export scaricato`,exportFailed:`Export non riuscito`},menu:{print:`Stampa`,openInBambuStudio:`Apri nello slicer`,slice:`Slice`,externalLink:`Link esterno`,viewOnMakerWorld:`Vedi su MakerWorld`,preview3d:`Anteprima 3D`,viewTimelapse:`Vedi Timelapse`,scanForTimelapse:`Cerca Timelapse`,uploadTimelapse:`Carica timelapse`,removeTimelapse:`Rimuovi timelapse`,downloadSource3mf:`Scarica Sorgente 3MF`,uploadSource3mf:`Carica Sorgente 3MF`,replaceSource3mf:`Sostituisci Sorgente 3MF`,removeSource3mf:`Rimuovi Sorgente 3MF`,uploadF3d:`Carica F3D`,replaceF3d:`Sostituisci F3D`,downloadF3d:`Scarica F3D`,removeF3d:`Rimuovi F3D`,download:`Scarica`,copyDownloadLink:`Copia link download`,qrCode:`Codice QR`,viewPhotos:`Vedi foto`,viewPhotosCount:`Vedi foto ({{count}})`,projectPage:`Pagina progetto`,addToFavorites:`Aggiungi ai preferiti`,removeFromFavorites:`Rimuovi dai preferiti`,edit:`Modifica`,printLog:`Registro stampe`,goToProject:`Vai al progetto: {{name}}`,addToProject:`Aggiungi al progetto`,removeFromProject:`Rimuovi dal progetto`,loading:`Caricamento...`,noProjectsAvailable:`Nessun progetto disponibile`,searchProjects:`Cerca progetti…`,select:`Seleziona`,deselect:`Deseleziona`,delete:`Elimina`},permission:{noReprint:`Non hai il permesso di ristampare questo archivio`,noAddToQueue:`Non hai il permesso di aggiungere alla coda`,noUpdateArchives:`Non hai il permesso di aggiornare archivi`,noUploadFiles:`Non hai il permesso di caricare file`,noDownload:`Non hai il permesso di scaricare archivi`,noCopyLink:`Non hai il permesso di copiare link download`,noDelete:`Non hai il permesso di eliminare questo archivio`,noEdit:`Non hai il permesso di modificare questa voce`,noCreate:`Non hai il permesso di creare archivi`},platePicker:{title:`Seleziona la piastra da visualizzare`,hint:`Questo archivio contiene più piastre. Scegline una da aprire nel visualizzatore GCode.`,plateLabel:`Piastra {{index}}`,objectCount:`{{count}} oggetto`,objectCount_plural:`{{count}} oggetti`,noGcode:`Questo archivio non contiene G-code generato da visualizzare. Aprilo prima in Bambu Studio per sezionarlo.`},card:{previousPlate:`Piatto precedente`,nextPlate:`Piatto successivo`,plateNumber:`Piatto {{index}}`,moreOptions:`Clic destro per altre opzioni`,addToFavorites:`Aggiungi ai preferiti`,removeFromFavorites:`Rimuovi dai preferiti`,cancelled:`annullato`,failed:`fallito`,duplicate:`duplicato`,duplicateTitle:`Questo modello è stato stampato prima`,openSource3mf:`Apri sorgente 3MF in Bambu Studio (clic destro per altre opzioni)`,downloadF3d:`Scarica file design Fusion 360`,viewTimelapse:`Vedi timelapse`,viewPhoto:`Vedi 1 foto`,viewPhotos:`Vedi {{count}} foto`,openFolder:`Apri cartella: {{name}}`,slicedFile:`File slice - pronto a stampare`,sourceFile:`Solo file sorgente - nessuna mappatura AMS disponibile`,gcode:`GCODE`,source:`SOURCE`,project:`Progetto: {{name}}`,runsBadge:`{{count}} stampe`,runsBadgeTitle:`{{count}} stampe in totale — {{successful}} riuscite, {{failed}} fallite. Fai clic per vedere il registro completo.`,estimated:`Stimato: {{time}}`,actual:`Reale: {{time}}`,accuracy:`Accuratezza: {{percent}}%`,filament:`{{weight}} g`,layer:`{{count}} strato`,layers:`{{count}} strati`,object:`{{count}} oggetto`,objects:`{{count}} oggetti`,slicedFor:`Sliced per {{model}}`,uploadedBy:`Caricato da`,noPermissionReprint:`Non hai il permesso di ristampare`,noFileForReprint:`Nessun file 3MF disponibile — il file non è stato scaricato dalla stampante durante la registrazione`,slicerAmsMapping:`Mappatura AMS salvata ({{printer}})`,slicerAmsMappingTooltip:`La scelta dello slot AMS fatta dallo slicer è stata salvata per {{printer}}. I numeri di slot hanno senso solo su quella stampante, quindi una ristampa li riutilizza solo se torna su {{printer}}.`,noPermissionEdit:`Non hai il permesso di modificare archivi`,noPermissionDelete:`Non hai il permesso di eliminare archivi`,openInBambuStudio:`Apri nello slicer`,openInBambuStudioToSlice:`Apri nello slicer per slicing`,slice:`Slice`,externalLink:`Link esterno`,makerWorld:`MakerWorld – {{designer}}`,viewProject:`Vedi progetto`,noExternalLink:`Nessun link esterno`,preview3d:`Anteprima 3D`,download:`Scarica`,edit:`Modifica`,delete:`Elimina`},runLog:{title:`Registro stampe`,modalTitle:`Registro stampe — {{name}}`,modalTitleFallback:`questo archivio`,empty:`Nessun evento di stampa ancora registrato per questo archivio.`,col:{date:`Data`,status:`Stato`,duration:`Durata`,filament:`Filamento`,cost:`Costo`},status:{completed:`Completata`,failed:`Fallita`,cancelled:`Annullata`,stopped:`Interrotta`,skipped:`Saltata`,printing:`In stampa`}},modal:{deleteArchive:`Elimina Archivio`,deleteConfirm:`Sei sicuro di eliminare "{{name}}"? Questa azione non può essere annullata.`,deleteButton:`Elimina`,deletePurgeStats:`Rimuovi anche questa stampa dalle Quick Stats (filamento, tempo, costo, energia)`,deleteQueueItemsWarning:`{{count}} elemento/i in coda collegato/i a questo archivio verrà/verranno rimosso/i.`,deleteBlockedByPrinting:`Impossibile eliminare — {{count}} elemento/i in coda sono attualmente in stampa. Interrompi la stampa, poi riprova.`,removeSource3mf:`Rimuovi Sorgente 3MF`,removeSource3mfConfirm:`Sei sicuro di rimuovere il file sorgente 3MF da "{{name}}"? Questo eliminerà il progetto slicer originale.`,removeButton:`Rimuovi`,removeF3d:`Rimuovi F3D`,removeF3dConfirm:`Sei sicuro di rimuovere il file Fusion 360 da "{{name}}"?`,removeTimelapse:`Rimuovi timelapse`,removeTimelapseConfirm:`Sei sicuro di voler rimuovere il video timelapse da "{{name}}"?`,timelapse:`{{name}} – Timelapse`,selectTimelapse:`Seleziona Timelapse`,selectTimelapseDesc:`Nessun abbinamento automatico trovato. Seleziona il timelapse per questa stampa:`,deleteArchives:`Elimina Archivi`,deleteArchivesConfirm:`Sei sicuro di eliminare {{count}} archivio(i)? Questa azione non può essere annullata.`,deleteCount:`Elimina {{count}}`},page:{title:`Archivi`,printsCount:`{{filtered}} di {{total}} stampe`,dropFilesHere:`Rilascia file .3mf qui`,releaseToUpload:`Rilascia per caricare`,only3mfSupported:`Solo file .3mf supportati`,close:`Chiudi`,selected:`{{count}} selezionati`,selectAll:`Seleziona tutto`,tags:`Tag`,project:`Progetto`,favorite:`Preferito`,delete:`Elimina`,toggledFavorites:`Preferiti aggiornati per {{count}} archivio(i)`,failedUpdateFavorites:`Aggiornamento preferiti non riuscito`,archivesDeleted:`{{count}} archivio(i) eliminati`,failedDeleteArchives:`Eliminazione archivi non riuscita`,photoDeleted:`Foto eliminata`,failedDeletePhoto:`Eliminazione foto non riuscita`},list:{name:`Nome`,printer:`Stampante`,date:`Data`,size:`Dimensione`,actions:`Azioni`,hasTimelapse:`Ha timelapse`},log:{date:`Data`,printName:`Nome stampa`,printer:`Stampante`,user:`Utente`,status:`Stato`,duration:`Durata`,filament:`Filamento`,filamentUsed:`Filamento usato`,cost:`Costo`,energy:`Energia`,energyCost:`Costo energia`,completedAt:`Completato`,columns:`Colonne`,sortBy:`Ordina per {{column}}`,allPrinters:`Tutte le stampanti`,allUsers:`Tutti gli utenti`,allStatuses:`Tutti gli stati`,cancelled:`Annullato`,skipped:`Saltato`,dateFrom:`Dal`,dateTo:`Al`,noEntries:`Nessuna voce di registro trovata`,showing:`{{count}} di {{total}} voci`,rowsPerPage:`Righe`,page:`Pagina`,prev:`Prec.`,next:`Succ.`,clearLog:`Cancella registro`,clearLogTitle:`Cancella registro stampe`,clearLogConfirm:`Tutte le voci del registro di stampa verranno eliminate permanentemente. Gli archivi e gli elementi della coda non sono interessati. Questa azione non può essere annullata. Sei sicuro?`,clearLogButton:`Cancella tutto`,cleared:`{{count}} voci di registro cancellate`,clearFailed:`Impossibile cancellare il registro stampe`,deleteEntryTitle:`Elimina voce del registro stampe`,deleteEntryConfirm:`Questa voce verrà rimossa dal registro e i suoi contributi di filamento, tempo e costo verranno scartati dalle statistiche rapide. L'archivio corrispondente (se presente) non è interessato. Questa azione non può essere annullata.`,entryDeleted:`Voce del registro stampe eliminata`,entryDeleteFailed:`Impossibile eliminare la voce del registro stampe`,editEntryTitle:`Modifica voce del registro stampe`,editEntryDescription:`Classifica questa stampa. Il widget Analisi guasti raggruppa per questi valori, quindi gli aggiornamenti vengono riflessi immediatamente nelle statistiche.`,entryUpdated:`Voce del registro aggiornata`,entryUpdateFailed:`Impossibile aggiornare la voce del registro`,statuses:{completed:`Completata`,failed:`Fallita`,stopped:`Fermata`,cancelled:`Annullata`,skipped:`Saltata`}}},dispatchToast:{untitled:`Lavoro di stampa`,startingPrints:`Avvio delle stampe`,progressSummary:`{{complete}}/{{total}} completate • In corso: {{processing}}`,expandDetails:`Espandi i dettagli dell'invio`,collapseDetails:`Comprimi i dettagli dell'invio`,awaitingPrinter:`In attesa della stampante…`,status:{processing:`In corso`,completed:`Completata`,failed:`Fallita`},failed:{generic:`Invio fallito`,upload_failed:`Caricamento sulla stampante fallito`,start_command_failed:`La stampante ha rifiutato il comando di avvio`},dismiss:`Chiudi`},pipelineRuns:{title:`Esecuzioni pipeline`,loading:`Caricamento…`,empty:`Nessuna esecuzione di pipeline ancora.`,filter:{pipeline:`Pipeline`,status:`Stato`,target:`Destinazione`,all:`Tutte`,allPipelines:`Tutte le pipeline`,allStatus:`Tutti gli stati`,allTargets:`Tutte le destinazioni`,clear:`Pulisci filtri`,noMatches:`Nessuna esecuzione corrisponde ai filtri attuali.`},totalCount_one:`{{n}} esecuzione`,totalCount_other:`{{n}} esecuzioni`,copies:`{{n}} copie`,failedCount:`{{n}} fallite`,copyN:`Copia {{n}}`,retryFailed:`Riprova fallite`,retryOf:`ritentativo di #{{n}}`,pagination:`{{start}}–{{end}} di {{total}}`,toast:{cancelled:`Esecuzione annullata`,cancelFailed:`Annullamento fallito`,retryStarted:`Ritentativo avviato`,retryFailed:`Ritentativo fallito`,cleared:`{{n}} esecuzioni eliminate`,clearFailed:`Eliminazione fallita`},clearLog:`Cancella cronologia`,clearConfirmTitle:`Cancellare la cronologia?`,clearConfirmBody:`Eliminare tutte le esecuzioni di pipeline completate, fallite, annullate e con fallimento parziale? Le esecuzioni in corso sono conservate. Questa operazione non può essere annullata.`,clearConfirmAction:`Cancella`,jobStatus:{pending:`in attesa`,awaiting_printer:`in attesa stampante`,queued:`in coda`,printing:`stampa`,completed:`completata`,failed:`fallita`,cancelled:`annullata`},cancelledByUser:`Annullato dall'utente`},queue:{filamentShort:{rowBadge:`Filamento insufficiente per la bobina assegnata`,rowTooltip:`Lo scheduler ha segnalato questo elemento. Premi Play per vedere il deficit per slot e decidere se stampare comunque.`,confirmTitle:`Filamento insufficiente`,confirmIntro:`La bobina assegnata non puo coprire almeno uno slot. Stampare comunque?`,lineItem:`Slot {{slot}}: servono {{required}} g, rimangono {{remaining}} g`,unknown:`sconosciuto`,printAnyway:`Stampa comunque`},slicerAmsMapping:{rowBadge:`Slot AMS salvati per questa stampante`,rowTooltip:`Questo archivio conserva gli slot AMS esatti scelti dallo slicer, salvati per la stampante di questo elemento. Una ristampa su di essa può riutilizzare quelle bobine invece di rifare l'abbinamento per tipo e colore.`},title:`Coda di stampa`,subtitle:`Programma e gestisci i tuoi lavori di stampa`,editQueueItem:`Modifica elemento coda`,selectAllPlates:`Seleziona tutte le {{count}} piastre`,deselectAll:`Deseleziona tutto`,printQueued:`Stampa in coda`,printQueuedWillStartWhenIdle:`Si avvierà quando la stampante sarà inattiva`,itemsQueued:`{{count}} elementi in coda`,sending:`Invio...`,sendingProgress:`Invio {{current}}/{{total}}...`,adding:`Aggiunta...`,addingProgress:`Aggiunta {{current}}/{{total}}...`,savingProgress:`Salvataggio {{current}}/{{total}}...`,clearQueue:`Svuota coda`,clearHistory:`Svuota cronologia`,emptyQueue:`La coda è vuota`,position:`Posizione`,scheduledTime:`Ora programmata`,moveUp:`Sposta su`,moveDown:`Sposta giù`,startNow:`Avvia ora`,printingInProgress:`Stampa in corso...`,viewArchive:`Vedi archivio`,viewInFileManager:`Vedi nel Gestore file`,itemCount:`{{count}} elemento`,itemCount_plural:`{{count}} elementi`,dragToReorder:`Trascina per riordinare (solo ASAP)`,reorderHint:`La posizione influisce solo sugli elementi ASAP. Quelli programmati partono all'orario.`,sjf:{label:`SJF`,tooltip:`Lavoro più breve prima — lo scheduler dà priorità alle stampe più brevi`},addedBy:`Aggiunto da {{name}}`,nextInQueue:`Prossimo in coda`,clearPlateSuccess:`Piatto liberato — pronto per la prossima stampa`,plateNumber:`Piatto {{index}}`,quantity:`Quantità`,quantityHint:`Crea {{count}} elementi in coda`,plateQuantityLabel:`Stampe di {{plate}}`,plateQuantityTotal_one:`{{count}} stampa in totale`,plateQuantityTotal_other:`{{count}} stampe in totale`,batchOrders:{title:`Ordini in lotto`,emptyTitle:`Nessun ordine in lotto`,emptyDescription:`Metti in coda un file multi-piatto, o più copie di un piatto, e l'ordine compare qui con il suo avanzamento.`,filter:{active:`Attivi`,completed:`Completati`,cancelled:`Annullati`,all:`Tutti`},status:{active:`Attivo`,completed:`Completato`,cancelled:`Annullato`},noTargets:`Solo raggruppamento`,noTargetsHint:`Creato prima delle quantità per piatto: tiene traccia delle stampe in coda anziché di un obiettivo.`,dispatchRemaining:`Accoda {{count}} rimanenti`,dispatchPlate:`Accoda le rimanenti`,strandedPlate:`Nessuna impostazione da copiare`,strandedNotice:`Impossibile accodare {{runs}} delle {{owed}} stampe ancora dovute: per quella piastra non resta alcuna stampa in coda o completata da cui copiare le impostazioni. Accoda la piastra una volta dal file oppure annulla la commessa.`,dispatched:`Stampe rimanenti accodate per {{name}}`,plateProgress:`{{completed}} di {{target}} fatte`,remaining:`{{count}} ancora dovute`,failed:`{{count}} fallite`,printing:`{{count}} in stampa`,wholeFile:`Intero file`,due:`Scadenza {{date}}`,costSoFar:`{{amount}} finora`,costRemaining:`({{amount}} da spendere)`},activeBatches:`Lotti attivi`,batchProgress:`{{completed}} di {{total}} completati`,cancelBatch:`Annulla rimanenti`,batchCancelled:`Elementi rimanenti del lotto annullati`,cancelBatchConfirmTitle:`Annulla lotto`,cancelBatchConfirmMessage:`Chiudere questa commessa? Le stampe ancora in coda vengono annullate e la commessa smette di richiedere ciò che non ha prodotto.`,batch:{defaultName:`Lotto`,label:`{{count}} elemento`,label_plural:`{{count}} elementi`,pendingCount:`{{count}} in attesa`,pendingCount_plural:`{{count}} in attesa`,expand:`Espandi lotto`,collapse:`Comprimi lotto`,groupAsBatch:`Raggruppa come lotto…`,groupAsBatchDescription:`Combina gli {{count}} elementi selezionati in un unico lotto comprimibile.`,nameLabel:`Nome lotto`,namePlaceholder:`es. Regali del venerdì`,create:`Crea lotto`,ungroup:`Separa`,ungroupConfirmTitle:`Separare il lotto?`,ungroupConfirmMessage:`Gli elementi resteranno in coda ma non saranno più raggruppati.`,dragGroup:`Trascina gruppo`},tabs:{batches:`Lotti`,queue:`Coda`,history:`Cronologia`,timeline:`Linea temporale`,pipelines:`Pipeline`},layout:{flatList:`Elenco`,byPrinter:`Per stampante`,groupByPrinter:`Raggruppa per stampante`},history:{emptyTitle:`Nessuna cronologia`,emptyDescription:`Le stampe completate, annullate e fallite appariranno qui.`,showMore:`Mostra altri`,showingCount:`Visualizzati {{shown}} di {{total}}`},dragGhost:{multiCount:`{{count}} elementi`,batch:`{{name}} ({{count}} copia)`,batch_plural:`{{name}} ({{count}} copie)`},sections:{currentlyPrinting:`In stampa`,queued:`In coda`,history:`Cronologia`},status:{pending:`In attesa`,waiting:`In attesa`,printing:`In stampa`,paused:`In pausa`,completed:`Completato`,failed:`Fallito`,skipped:`Saltato`,cancelled:`Annullato`},summary:{printing:`In stampa`,queued:`In coda`,totalTime:`Tempo totale coda`,totalWeight:`Peso totale della coda`,history:`Cronologia`},filter:{allPrinters:`Tutte le stampanti`,unassigned:`Non assegnato`,allStatus:`Tutti gli stati`,allLocations:`Tutte le posizioni`,any:`Qualsiasi`},sort:{byPosition:`Ordina per posizione`,byName:`Ordina per nome`,byPrinter:`Ordina per stampante`,bySchedule:`Ordina per programma`,byDate:`Ordina per data`,ascendingOldest:`Crescente (più vecchi)`,descendingNewest:`Decrescente (più recenti)`},badges:{staged:`In staging`,requiresPrevious:`Richiede successo precedente`,autoPowerOff:`Spegnimento automatico`,gcodeInjection:`G-code`},empty:{title:`Nessuna stampa programmata`,description:`Programma una stampa dalla pagina Archivi usando l'opzione "Programma" nel menu contestuale, o trascina i file per iniziare.`},time:{etaIfStartedNow:`Orario di completamento se questo lavoro iniziasse ora`,whenFree:`Quando una stampante è libera`,overdue:`Scaduto`,now:`Ora`,lessThanMinute:`Tra meno di un minuto`,inMinutes:`Tra {{count}} min`,inHours:`Tra {{count}} ore`},actions:{startPrint:`Avvia Stampa`,stopPrint:`Ferma Stampa`,requeue:`Rimetti in coda`},bulkEdit:{title:`Modifica {{count}} elemento`,title_plural:`Modifica {{count}} elementi`,description:`Solo le impostazioni modificate saranno applicate agli elementi selezionati.`,printer:`Stampante`,noChange:`— Nessun cambio —`,queueOptions:`Opzioni coda`,staged:`In staging (avvio manuale)`,autoPowerOff:`Spegnimento automatico dopo stampa`,requirePrevious:`Richiede successo precedente`,gcodeInjection:`Inietta G-code`,printOptions:`Opzioni stampa`,bedLevelling:`Livellamento piatto`,flowCalibration:`Calibrazione flusso`,vibrationCalibration:`Calibrazione vibrazioni`,layerInspection:`Controllo primo layer`,timelapse:`Timelapse`,useAms:`Usa AMS`,nozzleOffsetCali:`Calibrazione offset ugelli`,applyChanges:`Applica modifiche`,selectAll:`Seleziona tutto`,deselectAll:`Deseleziona tutto`,selected:`{{count}} selezionati`,editSelected:`Modifica selezionati`,cancelSelected:`Annulla selezionati`},confirm:{cancelTitle:`Annulla stampa programmata`,cancelMessage:`Sei sicuro di annullare "{{name}}"?`,stopTitle:`Ferma Stampa`,stopMessage:`Sei sicuro di fermare la stampa corrente "{{name}}"? Questo annullerà il lavoro sulla stampante.`,removeTitle:`Rimuovi dalla cronologia`,removeMessage:`Sei sicuro di rimuovere "{{name}}" dalla cronologia coda?`,clearHistoryTitle:`Svuota cronologia`,clearHistoryMessage:`Sei sicuro di rimuovere {{count}} elemento(i) dalla cronologia?`,cancelButton:`Annulla Stampa`,stopButton:`Ferma Stampa`,thisPrint:`questa stampa`,thisItem:`questo elemento`},toast:{cancelled:`Elemento coda annullato`,cancelFailed:`Annullamento non riuscito`,removed:`Elemento coda rimosso`,keptForOrder:`Annullato anziché rimosso: è l'unica stampa da cui la commessa può riaccodare questa piastra`,historyKeptForOrders:`{{kept}} conservate perché servono ancora alle commesse.`,removeFailed:`Rimozione non riuscita`,stopped:`Stampa fermata`,stopFailed:`Impossibile fermare stampa`,released:`Stampa rilasciata in coda`,startFailed:`Avvio stampa non riuscito`,reorderFailed:`Riordino coda non riuscito`,historyCleared:`Cancellati {{count}} elementi cronologia`,clearHistoryFailed:`Svuotamento cronologia non riuscito`,updateFailed:`Aggiornamento elementi non riuscito`,bulkCancelled:`Annullati {{count}} elementi`,bulkCancelFailed:`Annullamento elementi non riuscito`,batchCreated:`Lotto «{{name}}» creato`,batchCreateFailed:`Creazione lotto non riuscita`,batchUngrouped:`{{count}} elemento/i separato/i`,batchUngroupFailed:`Separazione del lotto non riuscita`,resumedAfterFailure:`Coda ripresa — {{restored}} processo/i ripristinato/i come in attesa`,resumeAfterFailureFailed:`Ripresa della coda non riuscita`},resumeAfterFailure:{banner:`{{printer}} è bloccata da un errore di stampa precedente — {{count}} processo/i saltato/i`,bannerHint:`Risolvi il problema della stampante, poi riprendi per ripristinare i processi saltati e rimuovere il blocco.`,button:`Riprendi dopo errore`,confirmTitle:`Riprendere la coda dopo l'errore?`,confirmMessage:`Ripristinare {{count}} processo/i saltato/i su {{printer}} come in attesa e rimuovere il blocco della stampa precedente. Assicurati che la stampante sia pronta prima di continuare.`},timeline:{listView:`Lista`,timelineView:`Cronologia`,unassigned:`Non assegnato`,noData:`Nessuna stampa programmata per questo giorno`,nothingCommitted:`Nessuna pianificazione confermata in questa finestra. Elementi preparati, in attesa e ASAP su stampanti inattive non sono mostrati — imposta un orario pianificato o rilascia un elemento preparato per vederlo qui.`,allDoneBy:`Tutte le stampe completate entro le {{time}}`,staged:`In attesa`,filterAll:`Mostra tutto`,filterPrinting:`In stampa`,filterQueued:`In coda`,time:{anyMoment:`a momenti`,minutesLeft:`{{minutes}}m rimanenti`,hoursLeft:`{{hours}}h rimanenti`,hoursMinutesLeft:`{{hours}}h {{minutes}}m rimanenti`},day:{previous:`Giorno precedente`,next:`Giorno successivo`,today:`Oggi`},window:{back12h:`Indietro di 12 ore`,forward12h:`Avanti di 12 ore`,now:`Adesso`},printerColumnHeader:`Stampante`},permissions:{noStopPrint:`Non hai il permesso di fermare stampe`,noStartPrint:`Non hai il permesso di avviare stampe`,noEdit:`Non hai il permesso di modificare questo elemento coda`,noCancel:`Non hai il permesso di annullare questo elemento coda`,noRequeue:`Non hai il permesso di rimettere in coda elementi`,noRemove:`Non hai il permesso di rimuovere questo elemento coda`,noClearHistory:`Non hai il permesso di svuotare tutta la cronologia`,noEditItems:`Non hai il permesso di modificare elementi coda`,noCancelItems:`Non hai il permesso di annullare elementi coda`}},stats:{title:`Statistiche`,subtitle:`Trascina i widget per riordinare. Clicca l'icona occhio per nascondere.`,overview:`Panoramica`,totalPrints:`Stampe totali`,successRate:`Tasso di successo`,totalPrintTime:`Tempo totale di stampa`,printTime:`Tempo di stampa`,totalFilament:`Filamento totale usato`,filamentUsed:`Filamento usato`,filamentCost:`Costo filamento`,totalCost:`Costo totale`,energyUsed:`Energia usata`,energyCost:`Costo energia`,energyWarmingUpTooltip:`Il tracciamento energia sta ancora raccogliendo snapshot orari. I totali per intervallo diventeranno accurati quando esisterà almeno uno snapshot prima dell’intervallo selezionato. I primi valori potrebbero essere sottostimati.`,averagePrintTime:`Tempo medio di stampa`,printsPerDay:`Stampe al giorno`,byPrinter:`Per stampante`,printsByPrinter:`Stampe per stampante`,byMaterial:`Per materiale`,byMonth:`Per mese`,last7Days:`Ultimi 7 giorni`,last30Days:`Ultimi 30 giorni`,last90Days:`Ultimi 90 giorni`,allTime:`Sempre`,quickStats:`Statistiche rapide`,printActivity:`Attivita di stampa`,filamentTypes:`Tipi di filamento`,filamentTrends:`Trend filamento`,failureAnalysis:`Analisi guasti`,timeAccuracy:`Accuratezza tempo`,successful:`Riuscite:`,failed:`Fallite:`,cancelled:`Annullate:`,perfectEstimate:`100% = stima perfetta`,noTimeAccuracyData:`Nessun dato accuratezza tempo`,noFilamentData:`Nessun dato filamento`,noPrinterData:`Nessun dato stampante`,noPrintData:`Nessun dato stampa`,noPrintDataLast30Days:`Nessun dato stampa negli ultimi 30 giorni`,failureReasons:`Cause guasto`,topFailureReasons:`Cause principali`,failedPrintsCount:`{{failed}} / {{total}} stampe fallite`,lastWeekRate:`Settimana scorsa: {{rate}}%`,resetLayout:`Reimposta layout`,recalculateCosts:`Ricalcola costi`,recalculateCostsHint:`Ricalcola tutti i costi archivi usando i prezzi filamento correnti`,exportStats:`Esporta statistiche`,exportAsCsv:`Esporta come CSV`,exportAsExcel:`Esporta come Excel`,hiddenCount:`{{count}} Nascosti`,exportDownloaded:`Export scaricato`,exportFailed:`Export non riuscito`,layoutReset:`Layout reimpostato`,recalculatedCosts:`Costi ricalcolati per {{count}} archivi`,recalculateFailed:`Ricalcolo costi non riuscito`,loadingStats:`Caricamento statistiche...`,noPermissionResetLayout:`Non hai il permesso di reimpostare il layout`,noPermissionRecalculate:`Non hai il permesso di ricalcolare i costi`,noPrintDataInRange:`Nessun dato nel periodo selezionato`,periodFilament:`Filamento utilizzato`,periodCost:`Costo`,avgPerPrint:`Media per stampa`,usageOverTime:`Utilizzo nel tempo`,energyOverTime:`Energia nel tempo`,filamentByWeight:`Peso`,printDuration:`Durata stampa`,printerUtilization:`Utilizzo stampante`,filamentSuccess:`Successo per materiale`,printHabits:`Abitudini di stampa`,printTimeOfDay:`Ora di stampa`,colorDistribution:`Distribuzione colori`,noColorData:`Nessun dato colore disponibile`,records:`Record`,longestPrint:`Stampa più lunga`,heaviestPrint:`Stampa più pesante`,mostExpensivePrint:`Più costosa`,busiestDay:`Giorno più attivo`,successStreak:`Serie di successi`,streakPrint:`stampa consecutiva`,streakPrints:`{{count}} stampe consecutive`,printerStats:`Statistiche stampante`,hours:`ore`,avgPrints:`Media stampe`,noArchiveData:`Nessun dato di stampa disponibile`,filamentByTime:`Tempo`,avgWeight:`Media peso`,avgTime:`Media tempo`,filamentByPrints:`Stampe`,timeframe:{today:`Oggi`,"this-week":`Questa settimana`,"this-month":`Questo mese`,"last-7":`Ultimi 7 giorni`,"last-30":`Ultimi 30 giorni`,"last-90":`Ultimi 90 giorni`,"this-year":`Quest'anno`,"all-time":`Tutto`,custom:`Personalizzato`,from:`Da`,to:`A`},allUsers:`Tutti gli utenti`,noUser:`Nessun utente (Sistema)`,filterByUser:`Filtra per utente`},maintenance:{title:`Manutenzione`,overview:`Panoramica`,allOk:`Tutta la manutenzione aggiornata`,dueCount:`{{count}} elemento in scadenza`,dueCount_plural:`{{count}} elementi in scadenza`,warningCount:`{{count}} avviso`,warningCount_plural:`{{count}} avvisi`,totalPrintTime:`Tempo totale di stampa`,nextMaintenance:`Prossima manutenzione`,nothingDue:`Niente in scadenza`,tasks:`Attivita`,lastPerformed:`Ultima esecuzione`,interval:`Intervallo`,hoursRemaining:`{{hours}}h rimanenti`,hoursOverdue:`{{hours}}h in ritardo`,markDone:`Segna come fatto`,performMaintenance:`Esegui manutenzione`,history:`Cronologia`,noHistory:`Nessuna cronologia manutenzione`,editPrintHours:`Modifica ore stampa`,currentHours:`Ore attuali`,statusTab:`Stato`,settingsTab:`Impostazioni`,overdueCount:`{{count}} in ritardo`,dueSoonCount:`{{count}} in scadenza`,dueSoon:`In scadenza`,allGood:`Tutto ok`,overdueBy:`In ritardo di {{duration}}`,dueIn:`Scade tra {{duration}}`,timeLeft:`{{duration}} rimanenti`,day:`1 giorno`,days:`{{count}} giorni`,week:`1 settimana`,weeks:`{{count}} settimane`,month:`1 mese`,months:`{{count}} mesi`,year:`1 anno`,maintenanceTypes:`Tipi di manutenzione`,maintenanceTypesDescription:`Tipi di sistema e tue attivita personalizzate`,addCustomType:`Aggiungi tipo personalizzato`,restoreDefaults:`Ripristina attivita predefinite`,intervalType:`Tipo intervallo`,intervalValue:`Intervallo ({{type}})`,icon:`Icona`,documentationLink:`Link documentazione (opzionale)`,assignToPrinters:`Assegna alle stampanti`,selectAtLeastOnePrinter:`Seleziona almeno una stampante`,addType:`Aggiungi tipo`,custom:`Personalizzato`,printHours:`Ore di stampa`,calendarDays:`Giorni calendario`,exampleName:`es. Sostituisci filtro HEPA`,viewDocumentation:`Vedi documentazione`,timeBasedInterval:`Intervallo basato sul tempo`,intervalOverrides:`Override intervallo`,intervalOverridesDescription:`Personalizza intervalli per stampanti specifiche`,assignedToPrinters:`Assegnato alle stampanti:`,noPrintersAssigned:`Nessuna stampante assegnata`,addPrinterShort:`Aggiungi:`,printersAssignedClick:`{{count}} stampante(i) assegnata - clicca per gestire`,removeFromPrinter:`Rimuovi da questa stampante`,types:{lubricateCarbonRods:`Lubrifica aste in carbonio`,lubricateRails:`Lubrifica guide lineari`,cleanNozzle:`Pulisci ugello/Hotend`,checkBelts:`Controlla tensione cinghie`,cleanBuildPlate:`Pulisci piatto`,checkExtruder:`Controlla ingranaggi estrusore`,checkCooling:`Controlla ventole raffreddamento`,generalInspection:`Ispezione generale`,cleanCarbonRods:`Pulisci aste in carbonio`,lubricateSteelRods:`Lubrifica aste in acciaio`,cleanSteelRods:`Pulisci aste in acciaio`,cleanLinearRails:`Pulisci guide lineari`,checkPtfeTube:`Controlla tubo PTFE`,replaceHepaFilter:`Sostituisci filtro HEPA`,replaceCarbonFilter:`Sostituisci filtro carbone`,lubricateLeftNozzleRail:`Lubrifica guida ugello sinistro`},maintenanceComplete:`Manutenzione segnata come completata`,typeUpdated:`Tipo manutenzione aggiornato`,typeDeleted:`Tipo manutenzione eliminato`,defaultsRestored:`Ripristinate {{count}} attivita predefinite`,printHoursUpdated:`Ore di stampa aggiornate`,printerAssigned:`Stampante assegnata`,printerRemoved:`Stampante rimossa`,deleteTypeConfirm:`Eliminare "{{name}}"?`,deleteSystemTypeTitle:`Eliminare attività di manutenzione predefinita?`,deleteSystemTypeMessage:`Sei sicuro di voler eliminare l'attività di manutenzione predefinita "{{name}}"?`,noPermissionUpdate:`Non hai il permesso di aggiornare elementi manutenzione`,noPermissionPerform:`Non hai il permesso di eseguire manutenzione`,noPermissionEditTypes:`Non hai il permesso di modificare tipi manutenzione`,noPermissionDeleteTypes:`Non hai il permesso di eliminare tipi manutenzione`,noPermissionEditHours:`Non hai il permesso di modificare ore stampa`,noPermissionRemovePrinter:`Non hai il permesso di rimuovere assegnazioni stampanti`,noPermissionAssignPrinter:`Non hai il permesso di assegnare stampanti`,noPermissionEditIntervals:`Non hai il permesso di modificare intervalli`,configureSettings:`Configura tipi e intervalli manutenzione`},settings:{sliceEngine:`Motore di slicing`,sliceEngineSidecar:`Sidecar del server`,sliceEngineSidecarHint:`Lo slicing viene eseguito sul server, nel container sidecar dello slicer.`,sliceEngineBrowser:`Nel browser`,sliceEngineBrowserHint:`Lo slicing viene eseguito su questo dispositivo, senza server.`,title:`Impostazioni`,general:`Generale`,tabs:{general:`Generale`,smartPlugs:`Prese smart`,sensors:`Sensori`,notifications:`Notifiche`,queue:`Flusso`,queueDispatch:`Coda e Dispatch`,queuePipelines:`Pipeline`,filament:`Filamento`,network:`Rete`,apiKeys:`Chiavi API`,virtualPrinter:`Stampante virtuale`,failureDetection:`Rilevamento guasti`,users:`Utenti`,backup:`Backup`,emailAuth:`Autenticazione Email`,ldap:`LDAP`,twoFa:`Autenticazione 2FA`,oidc:`SSO / OIDC`,security:`Sicurezza`,spoolbuddy:`SpoolBuddy`},ldap:{title:`Autenticazione LDAP`,enabledDesc:`L'autenticazione LDAP è attiva`,disabledDesc:`L'autenticazione LDAP è disattivata`,disabledHint:`Configura e salva le impostazioni LDAP qui sotto, poi attiva.`,enabled:`Autenticazione LDAP attivata`,disabled:`Autenticazione LDAP disattivata`,feature1:`Gli utenti possono accedere con le credenziali LDAP`,feature2:`L'account amministratore locale rimane come fallback`,feature3:`I gruppi LDAP vengono mappati ai gruppi BamBuddy al login`,serverConfig:`Configurazione server LDAP`,serverUrl:`URL del server`,serverUrlHint:`Usa ldap:// per standard o ldaps:// per connessioni SSL`,security:`Sicurezza`,securityHint:`StartTLS aggiorna una connessione semplice a TLS. LDAPS usa TLS fin dall'inizio.`,bindDn:`Bind DN (account di servizio)`,bindPassword:`Password Bind`,searchBase:`Base DN di ricerca`,userFilter:`Filtro di ricerca utente`,userFilterHint:`{username} viene sostituito con il nome utente. Usa (uid={username}) per OpenLDAP.`,advanced:`Avanzate`,autoProvision:`Provisioning automatico utenti`,autoProvisionHint:`Crea automaticamente un account BamBuddy al primo accesso LDAP`,defaultGroup:`Gruppo predefinito`,defaultGroupNone:`— Nessuno (nessun fallback) —`,defaultGroupHint:`Gruppo di fallback assegnato quando un utente LDAP si autentica ma non è presente in nessun gruppo LDAP mappato. Lascia vuoto per lasciare gli utenti non mappati senza autorizzazioni.`,groupMapping:`Mappatura gruppi (JSON)`,groupMappingHint:`Mappa i DN dei gruppi LDAP ai gruppi BamBuddy. Gruppi disponibili: `,testConnection:`Test connessione`,settingsSaved:`Impostazioni LDAP salvate`,errors:{serverRequired:`L'URL del server LDAP è obbligatorio`,searchBaseRequired:`Il Base DN di ricerca è obbligatorio`,enableAuthFirst:`Attiva prima l'autenticazione`,configureLdapFirst:`Salva prima le impostazioni LDAP`}},email:{smtpSettings:`Configurazione SMTP`,smtpHost:`Server SMTP`,smtpPort:`Porta SMTP`,security:`Sicurezza`,authentication:`Autenticazione`,username:`Nome utente`,password:`Password`,fromEmail:`Email mittente`,fromName:`Nome mittente`,testConnection:`Testa connessione SMTP`,testRecipient:`Email destinatario test`,sendTest:`Invia email di test`,sending:`Invio...`,save:`Salva impostazioni`,saving:`Salvataggio...`,advancedAuth:`Autenticazione avanzata`,advancedAuthEnabled:`L'autenticazione avanzata è abilitata`,advancedAuthEnabledDesc:`Le funzionalità di gestione utenti via email sono attive. I nuovi utenti riceveranno password generate automaticamente via email e potranno reimpostare la password tramite la funzione di recupero.`,advancedAuthDisabled:`L'autenticazione avanzata è disabilitata`,advancedAuthDisabledDesc:`Abilita l'autenticazione avanzata per attivare le funzionalità email per la gestione utenti.`,enable:`Abilita`,disable:`Disabilita`,feature1:`Le password vengono generate automaticamente e inviate via email ai nuovi utenti`,feature2:`Gli utenti possono accedere con nome utente o email`,feature3:`La funzione di recupero password è disponibile`,feature4:`Gli amministratori possono reimpostare le password utente via email`,errors:{requiredFields:`Compilare tutti i campi obbligatori`,usernameRequired:`Il nome utente è obbligatorio quando l'autenticazione è abilitata`,enterTestEmail:`Inserire un indirizzo email di test`,smtpServerAndEmail:`Compilare Server SMTP e Email mittente prima di testare`,usernamePasswordRequired:`Nome utente e password sono obbligatori quando l'autenticazione è abilitata`,configureSmtpFirst:`Configurare e testare le impostazioni SMTP prima`,enableAuthFirst:`Per utilizzare le funzionalità basate sulla posta elettronica, è necessario prima abilitare l'autenticazione.`},success:{settingsSaved:`Impostazioni SMTP salvate con successo`},securityOptions:{starttls:`STARTTLS (Porta 587)`,ssl:`SSL/TLS (Porta 465)`,none:`Nessuna (Porta 25)`},authOptions:{enabled:`Abilitata`,disabled:`Disabilitata`}},appearance:`Aspetto`,notifications:`Notifiche`,smartPlugs:`Prese smart`,spoolman:`Spoolman`,updates:`Aggiornamenti`,language:`Lingua`,languageDescription:`Seleziona la lingua preferita`,theme:`Tema`,themeLight:`Chiaro`,themeDark:`Scuro`,themeSystem:`Sistema`,defaultView:`Vista predefinita`,defaultViewDescription:`Pagina da mostrare all'apertura dell'app`,checkForUpdates:`Controlla aggiornamenti`,autoUpdate:`Aggiornamento automatico`,currentVersion:`Versione attuale`,latestVersion:`Ultima versione`,upToDate:`Sei aggiornato`,updateAvailable:`Aggiornamento disponibile`,notificationLanguage:`Lingua notifiche`,notificationLanguageDescription:`Lingua per notifiche push`,bedCooledThreshold:`Soglia raffreddamento piatto`,bedCooledThresholdDescription:`Temperatura sotto la quale il piatto è considerato raffreddato dopo una stampa`,userNotificationsEnabled:`Notifiche utente`,userNotificationsEnabledDescription:`Abilita il menu notifiche utente e le notifiche e-mail per gli eventi di stampa. Richiede l'autenticazione avanzata.`,userNotificationsDisabledHint:`Abilita l'autenticazione avanzata per usare le notifiche utente.`,notificationProviders:`Provider notifiche`,addProvider:`Aggiungi provider`,editProvider:`Modifica provider`,providerType:`Tipo provider`,testNotification:`Notifica di test`,testSuccess:`Notifica di test inviata`,testFailed:`Invio notifica di test fallito`,quietHours:`Ore silenziose`,quietHoursDescription:`Non disturbare in queste ore`,quietHoursStart:`Inizio`,quietHoursEnd:`Fine`,events:{title:`Eventi notifica`,printStart:`Stampa avviata`,printComplete:`Stampa completata`,printFailed:`Stampa fallita`,printStopped:`Stampa interrotta`,printProgress:`Avanzamento`,printProgressDescription:`Notifica al 25%, 50%, 75%`,printerOffline:`Stampante offline`,printerError:`Errore stampante`,filamentLow:`Filamento in esaurimento`,maintenanceDue:`Manutenzione dovuta`,maintenanceDueDescription:`Notifica quando serve manutenzione`},smartPlug:{title:`Prese smart`,add:`Aggiungi presa smart`,edit:`Modifica presa smart`,name:`Nome`,ipAddress:`Indirizzo IP`,linkedPrinter:`Stampante collegata`,autoOn:`Accensione automatica`,autoOnDescription:`Accendi all'avvio stampa`,autoOff:`Spegnimento automatico`,autoOffDescription:`Spegni dopo il completamento`,offDelay:`Ritardo spegnimento`,offDelayMinutes:`Minuti dopo la stampa`,offDelayTemp:`Quando ugello sotto temperatura`,currentState:`Stato attuale`,turnOn:`Accendi`,turnOff:`Spegni`},filamentTracking:`Tracciamento filamento`,filamentTrackingDesc:`Scegli come tracciare le bobine di filamento. Puoi usare l'inventario integrato o collegare un server Spoolman esterno.`,autoAddUnknownRfid:`Aggiungi automaticamente bobine RFID sconosciute`,autoAddUnknownRfidDesc:`Crea automaticamente una voce di inventario quando viene rilevata una bobina con tag RFID sconosciuto. Disabilita se registri manualmente le nuove bobine in anticipo per evitare duplicati.`,filamentChecks:`Controlli filamento`,disableFilamentWarnings:`Disabilita avvisi filamento`,disableFilamentWarningsDesc:`Non mostrare avvisi per filamento insufficiente durante la stampa o l'accodamento`,preferLowestFilament:`Preferisci il filamento con meno residuo`,preferLowestFilamentDesc:`Quando più bobine corrispondono, usa quella con meno filamento rimanente`,preferLowestFilamentBackupNote:`Ha effetto solo se AMS Filament Backup è abilitato sulla stampante — altrimenti la stampante non può passare a una seconda bobina quando quella scelta finisce.`,trackingModeBuiltIn:`Inventario integrato`,trackingModeBuiltInDesc:`Riconoscimento RFID automatico e tracciamento dell'uso inclusi`,trackingModeSpoolmanDesc:`Server esterno per la gestione del filamento`,builtInFeatureRfid:`Rileva automaticamente le bobine Bambu Lab RFID nell'AMS`,builtInFeatureUsage:`Traccia il consumo di filamento per stampa`,builtInFeatureCatalog:`Gestisci bobine, colori e profili K-factor`,builtInFeatureThirdParty:`Le bobine di terze parti possono essere assegnate alle bobine dell'inventario`,amsSyncButton:`Sincronizza pesi dall'AMS`,amsSyncTitle:`Sincronizza pesi bobine dall'AMS`,amsSyncMessage:`Questo sovrascriverà tutti i pesi delle bobine dell'inventario con i valori attuali di percentuale rimanente dell'AMS dalle stampanti connesse. Usa questa funzione per recuperare dati di peso corrotti. Le stampanti devono essere online.`,amsSyncing:`Sincronizzazione...`,amsSyncSuccess:`{{synced}} bobina/e sincronizzata/e, {{skipped}} saltata/e`,amsSyncError:`Impossibile sincronizzare i pesi dall'AMS`,spoolmanAmsSyncButton:`Sincronizza i pesi Spoolman dall'AMS`,spoolmanAmsSyncTitle:`Sincronizza i pesi delle bobine Spoolman dall'AMS`,spoolmanAmsSyncMessage:`Questo aggiornerà i pesi di tutte le bobine Spoolman in base ai valori di riempimento AMS correnti delle stampanti connesse. Le stampanti devono essere online.`,spoolmanAmsSyncing:`Sincronizzazione...`,spoolmanAmsSyncSuccess:`{{synced}} bobina/e sincronizzata/e, {{skipped}} saltata/e`,spoolmanAmsSyncError:`Impossibile sincronizzare i pesi Spoolman dall'AMS`,spoolmanAmsSyncErrorUnreachable:`Sincronizzazione fallita (Spoolman non raggiungibile)`,spoolmanAmsSyncErrorNotConfigured:`Sincronizzazione fallita (Spoolman non configurato)`,spoolmanNotConfigured:`Spoolman non configurato`,spoolmanFilamentCatalogTitle:`Catalogo filamenti Spoolman`,spoolmanFilamentCatalogDesc:`Nomi dei filamenti e pesi tara dalla tua istanza Spoolman. Nome e peso bobina sono modificabili qui; tutte le altre proprietà sono gestite direttamente in Spoolman.`,spoolmanUrl:`URL Spoolman`,spoolmanUrlHint:`URL del server Spoolman (es. http://localhost:7912)`,spoolmanConnected:`Connesso`,spoolmanDisconnected:`Disconnesso`,status:`Stato`,connect:`Connetti`,disconnect:`Disconnetti`,howSyncWorks:`Come funziona la sincronizzazione`,syncInfoRfidOnly:`Solo le bobine ufficiali Bambu Lab con RFID vengono sincronizzate`,syncInfoAutoCreate:`Le nuove bobine vengono create automaticamente in Spoolman alla prima sincronizzazione`,syncInfoThirdPartySkipped:`Le bobine non Bambu Lab (terze parti, ricaricate) vengono saltate`,linkingExistingSpools:`Collegamento bobine esistenti`,linkingExistingSpoolsDesc:`Per collegare le bobine Spoolman esistenti all'AMS, passa il mouse su uno slot AMS e clicca "Collega a Spoolman".`,syncMode:`Modalità sincronizzazione`,syncModeAuto:`Automatica`,syncModeManual:`Solo manuale`,syncModeAutoDesc:`I dati AMS si sincronizzano automaticamente quando vengono rilevate modifiche`,syncModeManualDesc:`Sincronizzazione solo quando attivata manualmente`,syncAmsData:`Sincronizza dati AMS`,syncAmsDataDesc:`Sincronizza manualmente i dati AMS della stampante su Spoolman`,allPrinters:`Tutte le stampanti`,noDefaultPrinter:`Nessuna predefinita (chiedi ogni volta)`,sidebarOrder:`Ordine barra laterale`,saveThumbnails:`Salva miniature`,captureFinishPhoto:`Acquisisci foto finale`,noPrintersConfigured:`Nessuna stampante configurata`,archiveMode:{always:`Crea sempre voce archivio`,never:`Non creare mai voce archivio`,ask:`Chiedi ogni volta`},checkForUpdatesLabel:`Controlla aggiornamenti`,checkPrinterFirmware:`Controlla firmware stampante`,includeBetaUpdates:`Includi versioni beta`,includeBetaUpdatesDesc:`Notifica versioni beta e prerelease durante il controllo aggiornamenti`,localLogin:{disable:`Disabilita l'accesso locale con nome utente/password`,disableHint:`Quando attivato, solo i provider SSO possono accedere. LDAP non è interessato. Imposta BAMBUDDY_LOCAL_LOGIN=true sul server per mantenere un percorso di ripristino.`},enableRetry:`Abilita retry`,homeAssistantDescription:`Controlla prese smart tramite Home Assistant`,environmentManagedLabel:`(Gestito dall'ambiente)`,autoEnabledViaEnv:`Abilitato automaticamente tramite variabili d'ambiente`,urlFromEnvReadOnly:`Valore impostato dalla variabile d'ambiente HA_URL (sola lettura)`,tokenFromEnvReadOnly:`Valore impostato dalla variabile d'ambiente HA_TOKEN (sola lettura)`,mqttConnectedTo:`Connesso a`,prometheusDescription:`Esponi dati stampante in formato Prometheus`,noSmartPlugsTitle:`Nessuna presa smart configurata`,noSmartPlugsDescription:`Aggiungi una presa smart Tasmota per monitorare energia e automatizzare il controllo.`,noProvidersTitle:`Nessun provider configurato`,noProvidersDescription:`Aggiungi un provider per ricevere avvisi.`,noTemplatesAvailable:`Nessun template disponibile. Riavvia il backend per generare i template predefiniti.`,apiPermissionView:`Visualizza stato stampante e coda`,apiPermissionEdit:`Aggiungi e rimuovi elementi dalla coda di stampa`,apiKeysEmptyTitle:`Nessuna chiave API`,apiKeysEmptyDescription:`Crea una chiave API per integrare servizi esterni.`,noUsersFound:`Nessun utente trovato`,noGroupsFound:`Nessun gruppo trovato`,noGroupsAvailable:`Nessun gruppo disponibile`,passwordsDoNotMatch:`Le password non coincidono`,systemGroupWarning:`I nomi dei gruppi di sistema non possono essere modificati`,authDisabledTitle:`Autenticazione disabilitata`,authDisabledFeature1:`Richiedi accesso per usare il sistema`,authDisabledFeature2:`Crea più utenti con permessi basati sui gruppi`,authDisabledFeature3:`Controlla accesso con 50+ permessi granulari`,userHasCreated:`Questo utente ha creato:`,userItemsQuestion:`Cosa vuoi fare con questi elementi?`,deleteUserConfirm:`Sei sicuro di voler eliminare questo utente?`,actionCannotBeUndone:`Questa azione non può essere annullata.`,addFirstSmartPlug:`Aggiungi la tua prima presa smart`,providers:`Provider`,log:`Registro`,testAll:`Testa tutto`,testResults:`Risultati test`,testPassedCount:`{{count}} riusciti`,testFailedCount:`{{count}} falliti`,messageTemplates:`Template messaggi`,messageTemplatesDescription:`Personalizza i messaggi per ogni evento.`,apiKeys:`Chiavi API`,apiKeysDescription:`Crea chiavi API per integrazioni esterne e webhook.`,createKey:`Crea chiave`,apiKeyCreated:`Chiave API creata con successo`,apiKeyCopyWarning:`Copia questa chiave ora - non verra mostrata di nuovo!`,useInApiBrowser:`Usa nel Browser API`,apiKeyQrButton:`Codice QR`,apiKeyQrTitle:`Scansiona per configurare`,apiKeyQrCaption:`Scansiona con la tua app mobile per aggiungere questo server e la chiave API.`,apiKeyQrWarning:`Contiene la tua chiave API segreta: non condividerla né farne screenshot dove altri possono vederla.`,createNewApiKey:`Crea nuova chiave API`,keyName:`Nome chiave`,keyNamePlaceholder:`es., Home Assistant, OctoPrint`,readStatus:`Leggi stato`,readStatusDescription:`Visualizza stato stampante, coda, libreria, archivi e pipeline dello slicer`,manageQueue:`Gestisci coda`,manageQueueDescription:`Aggiungi e rimuovi elementi dalla coda di stampa. Insieme a "Gestisci libreria", esegui pipeline dello slicer`,controlPrinter:`Controlla stampante`,controlPrinterDescription:`Metti in pausa, riprendi e ferma stampe`,manageLibrary:`Gestisci libreria`,manageLibraryDescription:`Carica, rinomina, elimina ed esegui lo slicing dei file della libreria; importa modelli da MakerWorld. Insieme a "Gestisci coda", esegui pipeline dello slicer`,manageInventory:`Gestisci inventario`,manageInventoryDescription:`Crea, aggiorna ed elimina bobine e voci di inventario. Necessario per i chioschi SpoolBuddy (scansione NFC, letture della bilancia, comandi di sistema del chiosco).`,manageMaintenance:`Gestisci manutenzione`,manageMaintenanceDescription:`Registra le manutenzioni completate, azzera i contatori, modifica gli intervalli e gestisci il catalogo dei tipi di manutenzione. Adatto alle automazioni Home Assistant che registrano "ho pulito l'ugello" senza concedere un controllo più ampio della stampante.`,manageArchives:`Gestisci archivi`,manageArchivesDescription:`Modifica ed elimina gli archivi di stampa, inclusa la rimozione delle vecchie stampe e del loro contributo alle statistiche. Adatto alle automazioni che sfoltiscono la cronologia di stampa.`,manageProjects:`Gestisci progetti`,manageProjectsDescription:`Crea, aggiorna ed elimina progetti e aggiungi archivi ad essi. Adatto alle automazioni che organizzano le stampe in progetti.`,maintenanceBadge:`Manutenzione`,archivesBadge:`Archivi`,projectsBadge:`Progetti`,libraryBadge:`Libreria`,inventoryBadge:`Inventario`,cloudAccess:`Consenti accesso cloud`,cloudAccessDescription:`Legge i preset e i filamenti Bambu Cloud per tuo conto. Richiede l'accesso a Bambu Cloud.`,cloudBadge:`Cloud`,updateEnergyCost:`Aggiorna prezzo elettricità`,updateEnergyCostDescription:`Consenti a questa chiave di inviare in POST un nuovo prezzo elettricità per kWh a /settings/electricity-price. Utile per automazioni Home Assistant a tariffa dinamica (Tibber, Octopus, ecc.). Questo è l'unico campo di impostazioni scrivibile via API key.`,energyCostBadge:`Energia`,legacyKey:`Legacy`,legacyKeyTooltip:`Creato prima della proprietà per utente; ricreare per accesso cloud`,unnamedKey:`Chiave senza nome`,lastUsed:`Ultimo uso`,read:`Lettura`,control:`Controllo`,createFirstKey:`Crea la tua prima chiave`,webhookEndpoints:`Endpoint webhook`,webhookApiKeyHint:`Usa la tua chiave API nell'header X-API-Key.`,webhook:{getAllStatus:`Ottieni stato di tutte le stampanti`,getSpecificStatus:`Ottieni stato di una stampante`,addToQueue:`Aggiungi alla coda di stampa`,pausePrint:`Metti in pausa stampa`,resumePrint:`Riprendi stampa`,stopPrint:`Ferma stampa`},apiBrowser:`Browser API`,apiBrowserDescription:`Esplora e testa tutti gli endpoint API disponibili.`,apiKeyForTesting:`Chiave API per test`,apiKeyPlaceholder:`Incolla qui la tua chiave API per testare gli endpoint autenticati...`,apiKeyHint:`Questa chiave verra inviata come header X-API-Key.`,deleteApiKeyTitle:`Elimina chiave API`,deleteApiKeyMessage:`Sei sicuro di voler eliminare questa chiave API? Le integrazioni che la usano non funzioneranno più.`,deleteKey:`Elimina chiave`,amsDisplayThresholds:`Soglie visualizzazione AMS`,amsThresholdsDescription:`Configura soglie colore per umidità e temperatura AMS.`,humidity:`Umidità`,goodGreen:`Buono (verde)`,fairOrange:`Discreto (arancione)`,aboveFairBad:`Sopra soglia discreta mostra rosso (scarso)`,fairAlsoDryingThreshold:`Questa soglia viene usata anche per attivare l'asciugatura automatica`,fairBelowDryingFloor:`L'asciugatura automatica non può raggiungere questo valore: un AMS segna {{floor}}% o più mentre riscalda, quindi ogni ciclo finirebbe e ripartirebbe subito. Portalo sopra il {{floor}}% se usi l'asciugatura automatica.`,temperature:`Temperatura`,goodBlue:`Buono (blu)`,aboveFairHot:`Sopra soglia discreta mostra rosso (caldo)`,tempAlarmThreshold:`Allarme sopra`,tempAlarmSeparateFromBand:`Solo la soglia di allarme invia notifiche: Buono e Discreto colorano solo la visualizzazione. Lascia vuoto per allarmare alla soglia discreta, come prima.`,tempAlarmMustBePositive:`Una soglia pari o inferiore a 0 viene ignorata: l'allarme usa la soglia discreta.`,historyRetention:`Conservazione cronologia`,keepSensorHistory:`Mantieni cronologia sensori per`,historyRetentionDescription:`I dati più vecchi saranno eliminati automaticamente`,defaultPrintOptions:`Opzioni di stampa predefinite`,defaultPrintOptionsDescription:`Imposta i valori predefiniti per le opzioni di stampa. Possono essere modificati nella finestra di stampa.`,defaultBedLevelling:`Livellamento piatto`,defaultBedLevellingDesc:`Livellamento automatico del piatto prima della stampa`,defaultFlowCali:`Calibrazione flusso`,defaultFlowCaliDesc:`Calibra il flusso di estrusione`,defaultVibrationCali:`Calibrazione vibrazioni`,defaultVibrationCaliDesc:`Riduce gli artefatti di ringing`,defaultLayerInspect:`Ispezione primo strato`,defaultLayerInspectDesc:`Ispezione IA del primo strato`,defaultTimelapse:`Timelapse`,defaultTimelapseDesc:`Registra un video timelapse`,defaultNozzleOffsetCali:`Calibrazione offset ugelli`,defaultNozzleOffsetCaliDesc:`Calibra gli offset tra gli ugelli`,tempFanPresetsTitle:`Preset di temperatura e ventola`,tempFanPresetsDescription:`Personalizza i valori di selezione rapida mostrati nei popover di temperatura e velocità ventola della scheda stampante. Il pulsante Off è sempre visibile.`,tempFanPresetsNozzle:`Temperatura ugello`,tempFanPresetsBed:`Temperatura piano`,tempFanPresetsChamber:`Temperatura camera`,tempFanPresetsFan:`Velocità ventola`,tempFanPresetsReset:`Ripristina valori predefiniti`,concurrentUploadsTitle:`Caricamenti simultanei`,concurrentUploadsDescription:`Quante stampanti possono ricevere file dalla coda contemporaneamente. Le stampanti ricevono i file lentamente (una stampa grande può richiedere diversi minuti) e ognuna aspetta il proprio turno: su un parco macchine ampio, aumentare questo valore evita che l'ultima stampante di un lotto debba attendere la fine di tutti i trasferimenti precedenti. Riducilo se la rete o l'host Bambuddy fatica con i trasferimenti paralleli.`,concurrentUploadsLabel:`Stampanti servite contemporaneamente`,concurrentUploadsHelp:`1 invia a una stampante alla volta (il comportamento precedente). Il valore predefinito è 4.`,staggeredStart:`Avvio scaglionato`,staggeredStartDescription:`Dimensione gruppo e intervallo predefiniti per scaglionare avvii di batch multi-stampante. Sovrascrivibili per batch nella finestra di stampa.`,preheatTitle:`Preriscaldo & Heat Soak`,preheatDescription:`Riscalda il piano (e la camera, se supportata) e mantiene la temperatura prima dell'avvio di ogni stampa in coda. Utile per filamenti tecnici (PA, ABS) su stampanti senza riscaldatore attivo della camera — il piano scalda la camera per irraggiamento mentre il timer di soak scorre. La temperatura target del piano viene letta dal file di stampa; il comportamento della camera dipende dal modello di stampante.`,preheatEnabled:`Abilita preriscaldo & soak`,preheatEnabledDesc:`Se disattivato, le stampe in coda partono subito. Ogni elemento può sovrascrivere per singola stampa.`,preheatFilamentTargetsLabel:`Target camera per filamento (°C)`,preheatFilamentTargetsHint:`Bambuddy sceglie il target più alto tra gli slot AMS caricati. Una stampa i cui slot derivano tutti 0 — PLA, PETG, TPU, PVA — salta del tutto il preriscaldamento e parte subito.`,preheatFilamentTargetsReset:`Ripristina valori predefiniti`,preheatFilamentTargetsDefaultRow:`Altro / non mappato`,preheatMaxWait:`Attesa max (secondi)`,preheatMaxWaitHelp:`Limite della fase di riscaldamento camera prima del passaggio al soak.`,preheatSoak:`Soak (secondi)`,preheatSoakHelp:`Tenuta dopo il raggiungimento del target o lo scadere dell'attesa max.`,preheatHardwareTitle:`Comportamento per stampante:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E riscaldano attivamente la camera con M141. X1C/P2S leggono la temperatura ma scaldano la camera solo per irraggiamento dal piano. P1S/P1P/A1/A1 Mini non hanno sensore di camera — vale solo il timer di soak.`,preheatPerItemDesc:`Riscalda il piano e la camera prima dell'avvio di questa stampa. Per impostazione predefinita usa l'interruttore globale in Impostazioni → Workflow.`,preheatOverride_inherit:`Eredita`,preheatOverride_on:`Attivo`,preheatOverride_off:`Spento`,calibrationMode_off:`Spento`,calibrationMode_on:`Attivo`,calibrationMode_auto:`Auto`,preheatTargetOverride:`Sovrascrivi target camera (°C, vuoto = per filamento)`,preheatTargetOverrideHelp:`0 riscalda il piano ed esegue il mantenimento senza camera. Se lasciato vuoto, una stampa che non richiede la camera salta del tutto il preriscaldamento.`,plateClear:`Conferma piatto libero`,requirePlateClear:`Richiedi conferma piatto libero`,requirePlateClearDescription:`Quando questa opzione è abilitata, lo scheduler attende una conferma per stampante che il piatto sia libero prima di avviare le stampe in coda su stampanti con lavori completati. Disabilitandola vengono nascosti anche il badge di stato del piatto e il pulsante "Segna il piatto come liberato" sulle schede stampante.`,keepBedWarm:`Mantieni il piano caldo tra le stampe`,keepBedWarmDesc:`In attesa della conferma di piatto liberato, mantiene il piano alla temperatura di mantenimento indicata sotto così la camera resta calda — o alla temperatura del piano della stampa successiva se è più alta. Si applica solo quando la stampa successiva richiede il riscaldamento della camera (ASA, ABS, PA, PC, ecc.). Richiede la conferma di piatto liberato abilitata.`,keepWarmBedTemp:`Temperatura del piano in mantenimento (°C)`,keepWarmBedTempHelp:`Usato quando il piano serve a riscaldare la camera: durante il mantenimento in caldo e nel preriscaldamento se il file di stampa non contiene una temperatura del piano. Una temperatura più alta indicata dal file ha sempre la precedenza.`,keepWarmMaxMinutes:`Interrompi il mantenimento in caldo dopo (minuti)`,keepWarmMaxMinutesHelp:`Se il piatto non viene liberato entro questo tempo, i riscaldatori vengono spenti invece di restare accesi indefinitamente.`,gcodeInjection:`Iniezione G-code`,gcodeInjectionDescription:`Configura G-code personalizzato da iniettare all'inizio e/o alla fine delle stampe per sistemi di stampa automatica come Farmloop, SwapMod, AutoClear e Printflow 3D. Gli snippet sono configurati per modello di stampante e applicati quando "Inietta G-code" è abilitato su un elemento della coda.`,gcodeInjectionNoPrinters:`Nessuna stampante trovata. Aggiungi stampanti per configurare gli snippet G-code.`,gcodeStartLabel:`G-code iniziale`,gcodeEndLabel:`G-code finale`,gcodeStartPlaceholder:`G-code inserito prima dell'inizio della stampa...`,gcodeEndPlaceholder:`G-code aggiunto dopo la fine della stampa...`,staggerGroupSize:`Dimensione gruppo`,staggerGroupSizeHelp:`Stampanti da avviare simultaneamente per gruppo`,staggerInterval:`Intervallo (minuti)`,staggerIntervalHelp:`Ritardo tra l'avvio di ogni gruppo`,queueDrying:`Asciugatura automatica`,queueDryingDescription:`Asciugare automaticamente il filamento AMS quando la stampante è inattiva tra le stampe in coda. Usa la soglia di umidità sopra.`,queueDryingEnabled:`Abilita asciugatura automatica`,queueDryingEnabledDescription:`Avvia l'asciugatura AMS automaticamente quando la stampante è inattiva e l'umidità supera la soglia`,queueDryingBlock:`Attendi completamento asciugatura`,queueDryingBlockDescription:`Blocca la coda di stampa fino al completamento dell'asciugatura. Se disattivato, le stampe hanno priorità.`,ambientDryingEnabled:`Asciugatura ambientale`,ambientDryingEnabledDescription:`Asciuga automaticamente il filamento sulle stampanti inattive quando l'umidità supera la soglia, anche senza stampe in coda.`,printDryingEnabled:`Asciugatura durante la stampa`,printDryingEnabledDescription:`Consente all'asciugatura automatica di continuare durante una stampa su hardware supportato (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L con firmware recente). La temperatura di asciugatura viene automaticamente limitata a 5°C sotto il preset di riposo per proteggere le bobine.`,dryingPresets:`Preset di asciugatura`,dryingPresetsDescription:`Temperatura e durata per tipo di filamento. AMS 2 Pro usa temperature più basse, AMS-HT supporta temperature più alte.`,dryingFilament:`Filamento`,humidityThresholds:`Soglie di umidità`,humidityThresholdsDescription:`Soglia di umidità per tipo di filamento per asciugatura automatica e allarmi. Carichi misti in un AMS usano la soglia più bassa.`,humidityThresholdCol:`Soglia`,humidityThresholdDefault:`Predefinito (tipi sconosciuti)`,printModal:`Modale stampa`,expandCustomMapping:`Espandi mapping personalizzato di default`,expandCustomMappingDescription:`Quando stampi su più stampanti, mostra mapping AMS per stampante espanso`,authentication:`Autenticazione`,authEnabledDescription:`La tua istanza è protetta con autenticazione`,authDisabledDescription:`Abilita per richiedere accesso e gestire utenti`,authDisabledMessage:`Abilita autenticazione per creare account, gestire permessi e proteggere la tua istanza Bambuddy.`,enableAuthentication:`Abilita autenticazione`,currentUser:`Utente corrente`,changePassword:`Cambia password`,admin:`Amministratore`,users:`Utenti`,addUser:`Aggiungi utente`,groups:`Gruppi`,addGroup:`Aggiungi gruppo`,system:`Sistema`,noDescription:`Nessuna descrizione`,userCount:`{{count}} utenti`,permissionCount:`{{count}} permessi`,createUser:`Crea utente`,username:`Nome utente`,enterUsername:`Inserisci nome utente`,password:`Password`,enterPassword:`Inserisci password`,passwordRequirements:`Almeno 8 caratteri, con una maiuscola, una minuscola, una cifra e un carattere speciale.`,confirmPassword:`Conferma password`,confirmPasswordPlaceholder:`Conferma password`,viewReleaseOnGitHub:`Vedi release su GitHub`,turnAllPlugsOn:`Accendi tutte le prese`,turnAllPlugsOff:`Spegni tutte le prese`,clearNotificationLogs:`Cancella log notifiche`,clearLogsMessage:`Questo eliminerà definitivamente tutti i log notifiche più vecchi di 30 giorni. Questa azione non può essere annullata.`,clearLogs:`Cancella log`,resetUiPreferences:`Reimposta preferenze UI`,resetUiPreferencesMessage:`Questo reimposterà le preferenze UI ai valori predefiniti: ordine barra laterale, tema, layout dashboard, modalità vista e preferenze ordinamento. Stampanti, archivi e impostazioni server NON saranno modificati. La pagina si ricaricherà dopo la cancellazione.`,resetPreferences:`Reimposta preferenze`,deleteGroupTitle:`Elimina gruppo`,deleteGroupMessage:`Sei sicuro di voler eliminare questo gruppo? Gli utenti in questo gruppo perderanno questi permessi.`,deleteGroup:`Elimina gruppo`,disableAuthenticationTitle:`Disabilita autenticazione`,disableAuthenticationMessage:`Sei sicuro di voler disabilitare l'autenticazione? Questo renderà la tua istanza Bambuddy accessibile senza login. Tutti gli utenti resteranno nel database ma l'autenticazione sarà disabilitata.`,disableAuthentication:`Disabilita autenticazione`,configureBambuddy:`Configura Bambuddy`,systemDefault:`Predefinito di sistema`,archiveSettings:`Impostazioni archivio`,newWindow:`Nuova finestra`,embeddedOverlay:`Overlay incorporato`,preferredSlicer:`Slicer preferito`,preferredSlicerDescription:`Slicer utilizzato per lo slicing in-app tramite il sidecar API`,openInSlicerLabel:`Apri nello slicer`,openInSlicerInherit:`Come slicer API`,openInSlicerDescription:`Slicer desktop utilizzato dal pulsante 'Apri nello slicer'. Lascia su 'Come slicer API' per ereditare, o scegli uno slicer diverso per l'uso locale.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev hanno bug CLI noti che bloccano lo slicing di molti 3MF creati da Bambu — vedi le issue upstream #12426 (segfault su file multi-estrusore dipinti) e #13386 (rifiuto della validazione rigorosa dei range di parametri). Bambu Studio è raccomandato finché non arrivano le correzioni upstream.`,useSlicerApi:`Usa Slicer API`,useSlicerApiDescription:`Se attivo, le azioni "Slice" aprono il modale slicer integrato e chiamano il sidecar slicer-API. Se disattivo (predefinito), inoltrano al slicer desktop tramite schema URI.`,slicerCard:`Slicer`,orcaslicerApiUrl:`OrcaSlicer sidecar URL`,bambuStudioApiUrl:`Bambu Studio sidecar URL`,slicerStallTimeout:`Timeout di inattivita dello slicer (minuti)`,slicerStallTimeoutDescription:`Interrompe uno slice dopo questo tempo senza progressi dal sidecar. I modelli pesanti che continuano a segnalare progressi non vengono mai interrotti, per quanto tempo richiedano. I sidecar che non segnalano progressi usano questo valore come limite di tempo totale.`,slicerApiUrlDescription:`URL del container sidecar slicer-API. Lascia vuoto per usare le variabili d'ambiente SLICER_API_URL / BAMBU_STUDIO_API_URL.`,externalCameras:`Camere esterne`,costTracking:`Tracciamento costi`,printsOnly:`Solo stampe`,totalConsumption:`Consumo totale`,dataManagement:`Gestione dati`,storageUsage:`Memoria utilizzata`,storageUsageDescription:`Ripartizione della memoria per categoria`,storageUsageTotal:`Totale`,storageUsageErrors:`Errori`,storageUsageOtherBreakdown:`Altro (include risorse statiche, script e file di configurazione)`,storageUsageSystem:`Sistema`,storageUsageData:`Dati`,storageUsageUnavailable:`Informazioni sull'utilizzo della memoria non disponibili`,clearNotificationLogsDescription:`Elimina log notifiche più vecchi di 30 giorni`,resetUiPreferencesDescription:`Reimposta ordine barra laterale, tema, modalità vista e preferenze layout. Stampanti, archivi e impostazioni non vengono modificati.`,enableHomeAssistant:`Abilita Home Assistant`,enableMqtt:`Abilita MQTT`,useTls:`Usa TLS`,enableMetricsEndpoint:`Abilita endpoint metriche`,availableMetrics:`Metriche disponibili`,billingEnabled:`Abilita fatturazione`,billingEnabledDescription:`Addebita agli utenti le stampe e abilita le funzioni finanziarie`,printerKillSwitch:`Arresto automatico della stampa`,printerKillSwitchDescription:`Interrompi immediatamente le stampe non autorizzate`,financeBudgetReset:`Azzeramento mensile del budget finanziario`,financeBudgetResetDay:`Giorno di azzeramento`,financeBudgetResetDayHelp:`Per i mesi brevi, l'azzeramento utilizza l'ultimo giorno del mese.`,financeBudgetResetTimezone:`Fuso orario di azzeramento`,financeBudgetResetTimezoneHelp:`L'inizio della finestra di bilancio viene calcolato in questo fuso orario.`,rebuildLedger:`Ricostruisci il ledger del portafoglio`,rebuildLedgerStarted:`Ricostruzione del ledger avviata`,rebuildLedgerConfirmTitle:`Ricostruire il ledger del portafoglio?`,rebuildLedgerConfirmMessage:`Questo ricostruirà il ledger del portafoglio per riparare i valori di saldo storici. Eseguire solo se sai cosa stai facendo.`,rebuildLedgerInProgress:`Avvio della ricostruzione...`,editUser:`Modifica utente`,deleteUserTitle:`Elimina utente`,groupName:`Nome gruppo`,leaveEmptyForAnonymous:`Lascia vuoto per anonimo`,leaveEmptyForNoAuth:`Lascia vuoto per nessuna autenticazione`,enterNewPassword:`Inserisci nuova password`,confirmNewPassword:`Conferma nuova password`,enterGroupName:`Inserisci nome gruppo`,enterDescriptionOptional:`Inserisci descrizione (opzionale)`,enterCurrentPassword:`Inserisci password attuale`,enterNewPasswordMin6:`Inserisci nuova password (min 6 caratteri)`,toast:{keyCopied:`Chiave copiata negli appunti`,copyFailed:`Copia chiave fallita`,keyAddedToBrowser:`Chiave aggiunta al Browser API`,clearLogsFailed:`Eliminazione log fallita`,uiPreferencesReset:`Preferenze UI reimpostate. Aggiornamento...`,authDisabled:`Autenticazione disabilitata con successo`,authDisableFailed:`Disabilitazione autenticazione fallita`,apiKeyCreated:`Chiave API creata`,apiKeyDeleted:`Chiave API eliminata`,userCreated:`Utente creato con successo`,userUpdated:`Utente aggiornato con successo`,userDeleted:`Utente eliminato con successo`,groupCreated:`Gruppo creato con successo`,groupUpdated:`Gruppo aggiornato con successo`,groupDeleted:`Gruppo eliminato con successo`,fillRequiredFields:`Compila tutti i campi obbligatori`,passwordsDoNotMatch:`Le password non coincidono`,passwordTooShort:`La password deve essere di almeno 8 caratteri`,passwordNeedsUppercase:`La password deve contenere almeno una lettera maiuscola`,passwordNeedsLowercase:`La password deve contenere almeno una lettera minuscola`,passwordNeedsDigit:`La password deve contenere almeno una cifra`,passwordNeedsSpecial:`La password deve contenere almeno un carattere speciale`,enterGroupName:`Inserisci un nome gruppo`,settingsSaved:`Impostazioni salvate`,noPermissionUpdate:`Non hai il permesso di modificare le impostazioni`,cameraSettingsSaved:`Impostazioni camera salvate`,enterCameraUrl:`Inserisci un URL camera`,passwordChanged:`Password cambiata con successo`,connectionFailed:`Connessione fallita`,testFailed:`Test fallito`,cameraConnected:`Camera connessa{{resolution}}`,cameraConnectedCoalesced:`Camera connessa{{resolution}} (condivisa con un'acquisizione già in corso)`},testConnection:`Testa connessione`,catalog:{spoolCatalog:`Catalogo bobine`,spoolCatalogDescription:`Pesi delle bobine vuote per marca/tipo. Utilizzato per la ricerca automatica del peso quando si aggiungono bobine.`,searchCatalog:`Cerca nel catalogo...`,addNewEntry:`Aggiungi nuova voce`,namePlaceholder:`Nome (es. Bambu Lab - Plastica)`,weight:`Peso`,type:`Tipo`,default:`Predefinito`,custom:`Personalizzato`,noMatch:`Nessuna voce corrisponde alla ricerca`,empty:`Nessuna voce nel catalogo`,deleteEntry:`Elimina voce`,deleteConfirm:`Sei sicuro di voler eliminare "{{name}}"?`,resetCatalog:`Ripristina catalogo`,resetConfirm:`Ripristinare il catalogo ai valori predefiniti? Tutte le voci personalizzate verranno rimosse.`,loadFailed:`Impossibile caricare il catalogo bobine`,nameWeightRequired:`Nome e peso sono obbligatori`,entryAdded:`Voce aggiunta`,addFailed:`Impossibile aggiungere la voce`,entryUpdated:`Voce aggiornata`,updateFailed:`Impossibile aggiornare la voce`,entryDeleted:`Voce eliminata`,deleteFailed:`Impossibile eliminare la voce`,resetSuccess:`Catalogo ripristinato ai valori predefiniti`,resetFailed:`Impossibile ripristinare il catalogo`,exported:`{{count}} voci esportate`,imported:`{{added}} voci importate ({{skipped}} saltate)`,importFailed:`Impossibile importare: formato JSON non valido`,exportTooltip:`Esporta catalogo in JSON`,importTooltip:`Importa catalogo da JSON`,resetTooltip:`Ripristina valori predefiniti`,selectedCount:`{{count}} selezionati`,deleteSelected:`Elimina selezionati`,bulkDeleteConfirm:`Eliminare {{count}} voci?`,bulkDeleted:`{{count}} voci eliminate`,bulkDeleteFailed:`Impossibile eliminare le voci`,material:`Materiale`,spoolWeight:`Peso bobina`,color:`Colore`,updateSpoolWeight:`Aggiorna peso bobina`,filamentUpdated:`Filamento aggiornato`,filamentUpdateFailed:`Aggiornamento filamento non riuscito`,filamentUpdateInvalid:`Dati filamento non validi`,keepExistingSpoolWeight:`Mantieni vecchio peso per le bobine esistenti`,keepExistingSpoolWeightDesc:`Le bobine già create con questo tipo di filamento mantengono il vecchio peso tara. Le nuove bobine usano il valore aggiornato.`,applyToAllSpools:`Applica a tutte le bobine`,applyToAllSpoolsDesc:`Tutti i calcoli del peso per questo tipo di filamento usano immediatamente il nuovo peso tara.`},colorCatalog:{title:`Catalogo colori`,description:`Colori del filamento per produttore/materiale. Utilizzato per la ricerca automatica del colore quando si aggiungono bobine.`,searchColors:`Cerca colori...`,allManufacturers:`Tutti i produttori`,addNewColor:`Aggiungi nuovo colore`,manufacturer:`Produttore`,colorName:`Nome colore`,hex:`Hex`,materialOptional:`Materiale (opzionale)`,showing:`Visualizzazione di {{filtered}} su {{total}} colori`,noMatch:`Nessun colore corrisponde alla ricerca`,empty:`Nessun colore nel catalogo`,deleteColor:`Elimina colore`,deleteConfirm:`Sei sicuro di voler eliminare "{{name}}"?`,resetCatalog:`Ripristina catalogo colori`,resetConfirm:`Ripristinare il catalogo ai valori predefiniti? Tutti i colori personalizzati verranno rimossi.`,sync:`Sincronizza`,starting:`Avvio...`,syncTooltip:`Sincronizza da FilamentColors.xyz (2000+ colori, potrebbe richiedere un minuto)`,loadFailed:`Impossibile caricare il catalogo colori`,fieldsRequired:`Produttore, nome colore e colore hex sono obbligatori`,colorAdded:`Colore aggiunto`,addFailed:`Impossibile aggiungere il colore`,colorUpdated:`Colore aggiornato`,updateFailed:`Impossibile aggiornare il colore`,colorDeleted:`Colore eliminato`,deleteFailed:`Impossibile eliminare il colore`,resetSuccess:`Catalogo colori ripristinato ai valori predefiniti`,resetFailed:`Impossibile ripristinare il catalogo`,syncUpToDate:`Già aggiornato ({{count}} colori verificati)`,syncComplete:`{{added}} nuovi colori aggiunti ({{skipped}} già esistenti)`,syncError:`Errore di sincronizzazione`,syncFailed:`Impossibile sincronizzare da FilamentColors.xyz`,exported:`{{count}} colori esportati`,imported:`{{added}} colori importati ({{skipped}} saltati)`,importFailed:`Impossibile importare: formato JSON non valido`,selectedCount:`{{count}} selezionati`,deleteSelected:`Elimina selezionati`,bulkDeleteConfirm:`Eliminare {{count}} colori?`,bulkDeleted:`{{count}} colori eliminati`,bulkDeleteFailed:`Impossibile eliminare i colori`},dateFormat:`Formato data`,dateFormatUs:`US (MM/GG/AAAA)`,dateFormatEu:`EU (GG/MM/AAAA)`,dateFormatIso:`ISO (AAAA-MM-GG)`,timeFormat:`Formato ora`,timeFormat12:`12 ore (3:30 PM)`,timeFormat24:`24 ore (15:30)`,defaultPrinter:`Stampante predefinita`,defaultPrinterDescription:`Preseleziona questa stampante per upload, ristampe e altre operazioni.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Usa il layout della barra laterale per riordinare gli elementi, ripristinare la visibilità e gestire i link personalizzati.`,setDefault:`Imposta predefinito`,sidebarOrderSetDefaultHint:`Imposta predefinito applica l'ordine attuale del menu agli utenti che non hanno ancora personalizzato il proprio.`,sidebarDefaultSet:`L'ordine predefinito del menu è stato impostato.`,sidebarDefaultCleared:`Ordine predefinito del menu cancellato.`,sidebarDefaultFailed:`Impossibile impostare l'ordine predefinito del menu.`,reset:`Ripristina`,darkMode:`Modalità scura`,lightMode:`Modalità chiara`,active:`(attivo)`,background:`Sfondo`,accent:`Accento`,style:`Stile`,bgNeutral:`Neutro`,bgWarm:`Caldo`,bgCool:`Freddo`,bgOled:`OLED Nero`,bgSlate:`Blu ardesia`,bgForest:`Verde foresta`,accentGreen:`Verde`,accentTeal:`Verde acqua`,accentBlue:`Blu`,accentOrange:`Arancione`,accentPurple:`Viola`,accentRed:`Rosso`,styleClassic:`Classico`,styleGlow:`Luminoso`,styleVibrant:`Vibrante`,themeToggleHint:`Passa tra modalità scura, chiara e sistema con l'icona nella barra laterale.`,progressInTitle:`Avanzamento nella scheda`,progressInTitleDescription:`Mostra la percentuale della stampa attiva e un anello di avanzamento nella scheda del browser.`,autoArchivePrints:`Archiviazione automatica stampe`,autoArchiveDescription:`Salva automaticamente i file 3MF al completamento delle stampe`,saveThumbnailsDescription:`Estrai e salva le immagini di anteprima dai file 3MF`,captureFinishPhotoDescription:`Scatta una foto dalla fotocamera della stampante al completamento della stampa. Bambuddy registra un breve timelapse durante la stampa in modo che la foto possa essere ricavata dal momento precedente all'abbassamento del piatto; il file del timelapse viene mantenuto se hai abilitato il timelapse per questa stampa, altrimenti viene eliminato automaticamente dopo l'acquisizione della foto.`,finishPhotoRestorePlate:`Solleva il piatto per la foto finale`,finishPhotoRestorePlateDescription:`La stampante abbassa il piatto di circa 100 mm al termine di una stampa, lasciando l'oggetto finito sotto l'inquadratura della fotocamera. Bambuddy lo risolleva fino a poco sopra l'ultimo strato stampato, scatta la foto e poi lo riabbassa. Ignorato se l'altezza di stampa è sconosciuta o se un altro lavoro è in coda.`,ffmpegNotInstalled:`ffmpeg non installato`,ffmpegRequired:`L'acquisizione dalla fotocamera richiede ffmpeg. Installalo tramite <brew>brew install ffmpeg</brew> (macOS) o <apt>apt install ffmpeg</apt> (Linux).`,camera:`Fotocamera`,cameraViewMode:`Modalità visualizzazione fotocamera`,cameraOverlayDescription:`La fotocamera si apre in un overlay ridimensionabile sulla schermata principale`,cameraWindowDescription:`La fotocamera si apre in una finestra separata del browser`,externalCamerasDescription:`Configura fotocamere esterne per sostituire la fotocamera integrata della stampante. Supporta stream MJPEG, RTSP, snapshot HTTP e fotocamere USB (V4L2). Quando abilitata, la fotocamera esterna viene usata per la vista in diretta e le foto di completamento.`,cameraPlaceholderUsb:`Percorso dispositivo (/dev/video0)`,cameraPlaceholderUrl:`URL fotocamera (rtsp://... o http://...)`,cameraTypeMjpeg:`Stream MJPEG`,cameraTypeRtsp:`Stream RTSP`,cameraTypeSnapshot:`Snapshot HTTP`,cameraTypeUsb:`Fotocamera USB (V4L2)`,cameraSnapshotUrl:`URL istantanea (facoltativo)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`URL singolo frame usato per miniature di notifica, foto di fine, frame del layer timelapse e rilevamento del piano. Timelapse e rilevamento del piano richiedono ciascuno il proprio toggle per stampante — questo URL è solo la sorgente immagine che usano quando attivi. Lascia vuoto per acquisire dallo stream live sopra. Utile per go2rtc (/api/frame.jpeg) e telecamere IP con endpoint snapshot dedicato.`,cameraRotation:`Rotazione`,test:`Test`,connected:`Connesso`,disconnected:`Disconnesso`,currency:`Valuta`,defaultFilamentCost:`Costo filamento predefinito (per kg)`,electricityCost:`Costo elettricità per kWh`,energyDisplayMode:`Modalità visualizzazione energia`,energyModePrintDescription:`La dashboard mostra la somma dell'energia usata durante le stampe`,energyModeTotalDescription:`La dashboard mostra l'energia totale dalle prese smart`,fileManager:`Gestore file`,createArchiveEntry:`Crea voce archivio durante la stampa`,createArchiveEntryDescription:`Quando si stampa dal gestore file, crea opzionalmente una voce di archivio`,lowDiskSpaceWarning:`Avviso spazio disco insufficiente`,lowDiskSpaceDescription:`Mostra avviso quando lo spazio disco scende sotto questa soglia`,printerFirmware:`Firmware stampante`,checkFirmwareDescription:`Controlla aggiornamenti firmware da Bambu Lab`,bambuddySoftware:`Software Bambuddy`,autoCheckDescription:`Controlla automaticamente nuove versioni all'avvio`,checkNow:`Controlla ora`,updateAvailableVersion:`Aggiornamento disponibile: v{{version}}`,releaseNotes:`Note di rilascio`,updateViaDocker:`Aggiorna tramite Docker Compose:`,composeDirectory:`Cartella Compose`,composeDirectoryHint:`Cartella che contiene il tuo docker-compose.yml. Lascia vuoto per omettere il cd.`,copyUpdateCommand:`Copia comando di aggiornamento`,updateViaHomeAssistant:`Gli aggiornamenti sono gestiti dal Supervisor di Home Assistant. Apri Impostazioni → Add-on → Bambuddy in Home Assistant per installare la nuova versione.`,updateViaWindowsInstaller:`Le installazioni Windows si aggiornano rieseguendo l'installer. Scarica la nuova versione qui sotto — i tuoi dati, le impostazioni e le stampanti vengono mantenuti.`,downloadWindowsInstaller:`Scarica installer per v{{version}}`,installUpdate:`Installa aggiornamento`,latestVersionRunning:`Stai usando l'ultima versione`,failedToCheckUpdates:`Controllo aggiornamenti fallito: {{error}}`,backupRestore:`Backup e ripristino`,backupRestoreDescription:`Esporta/importa impostazioni e configura backup GitHub`,goToBackup:`Vai al backup`,externalUrl:`URL esterno`,externalUrlDescription:`L'URL esterno dove Bambuddy è accessibile. Usato per immagini di notifica e integrazioni esterne.`,bambuddyUrl:`URL Bambuddy`,externalUrlHint:`Includi protocollo e porta (es. http://192.168.1.100:8000)`,ftpRetry:`Riprova FTP`,ftpRetryDescription:`Riprova le operazioni FTP quando il WiFi della stampante è instabile. Si applica a download 3MF, upload stampe, download timelapse e aggiornamenti firmware.`,autoRetryDescription:`Riprova automaticamente le operazioni FTP fallite`,retryAttempts:`Tentativi di ripetizione`,retryDelay:`Ritardo ripetizione`,connectionTimeout:`Timeout connessione`,time_one:`{{count}} volta`,time_other:`{{count}} volte`,second_one:`{{count}} secondo`,second_other:`{{count}} secondi`,nSeconds:`{{count}} secondi`,increaseForWeakWifi:`Aumenta per stampanti con WiFi debole`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Connetti a Home Assistant per controllare le prese smart tramite l'API REST HA. Supporta entità switch, light, input_boolean e script.`,homeAssistantUrl:`URL Home Assistant`,longLivedAccessToken:`Token di accesso a lunga durata`,haTokenHint:`Crea un token in HA: Profilo → Token di accesso a lunga durata → Crea token`,connectionSuccessful:`Connessione riuscita`,connectionFailed:`Connessione fallita`,haConnectionSuccess:`Connesso con successo a Home Assistant.`,haConnectionFailed:`Connessione a Home Assistant fallita.`,mqttPublishing:`Pubblicazione MQTT`,mqttDescription:`Pubblica eventi BamBuddy su un broker MQTT esterno per l'integrazione con Node-RED, Home Assistant e altri sistemi di automazione.`,mqttEnableDescription:`Pubblica eventi su broker MQTT esterno`,brokerHostname:`Hostname broker`,port:`Porta`,usernameOptional:`Nome utente (opzionale)`,passwordOptional:`Password (opzionale)`,topicPrefix:`Prefisso topic`,topicPrefixHint:`I topic saranno: {{prefix}}/printers/<serial>/status, ecc.`,prometheusMetrics:`Metriche Prometheus`,prometheusEndpointDescription:`Esponi metriche stampante su <code>/api/v1/metrics</code> per monitoraggio Prometheus/Grafana.`,bearerTokenOptional:`Token Bearer (opzionale)`,bearerTokenHint:`Se impostato, le richieste devono includere <code>Authorization: Bearer <token></code>`,metricsConnectionStatus:`Stato connessione`,metricsPrinterState:`Stato stampante (idle/printing/ecc)`,metricsPrintProgress:`Progresso stampa 0-100%`,metricsBedTemp:`Temperatura piatto`,metricsNozzleTemp:`Temperatura ugello`,metricsPrintsTotal:`Stampe totali per risultato`,metricsMore:`...e altro (strati, ventole, coda, consumo filamento)`,smartPlugsDescription:`Connetti prese smart (Tasmota o Home Assistant) per automatizzare il controllo dell'alimentazione e monitorare il consumo energetico delle stampanti.`,allOn:`Tutte accese`,allOff:`Tutte spente`,addSmartPlug:`Aggiungi presa smart`,energySummary:`Riepilogo energia`,currentPower:`Potenza attuale`,plugsOnline:`{{reachable}}/{{total}} prese online`,today:`Oggi`,yesterday:`Ieri`,total:`Totale`,enablePlugsForSummary:`Abilita le prese per vedere il riepilogo energia`,addNotificationProvider:`Aggiungi`,systemBadge:`(Sistema)`,creating:`Creazione...`,changing:`Modifica...`,deleteUserAndItems:`Elimina utente E i suoi elementi`,deleteUserKeepItems:`Elimina utente, mantieni elementi (diventeranno senza proprietario)`,ok:`OK`,twoFa:{totpTitle:`App Authenticator (TOTP)`,totpDesc:`Usa un'app come Google Authenticator, Aegis o Authy.`,emailOtpTitle:`OTP via e-mail`,emailOtpDesc:`Invia un codice monouso a {{email}} al momento del login.`,emailOtpNoEmail:`Aggiungi un indirizzo e-mail al tuo account per abilitare questo metodo.`,addEmailFirst:`Il tuo account non ha un indirizzo e-mail. Chiedi a un amministratore di aggiungerne uno.`,setupTotp:`Configura app Authenticator`,setupAuthApp:`Configura app Authenticator`,setupInstructions:`Scansiona il codice QR con la tua app authenticator, poi conferma con un codice.`,manualEntry:`Impossibile scansionare? Inserisci questo segreto manualmente:`,scannedContinue:`Codice scansionato — continua`,enterCodeToConfirm:`Inserisci il codice a 6 cifre dalla tua app authenticator per confermare.`,activate:`Attiva`,disableTotp:`Disabilita Authenticator`,disableConfirmHint:`Inserisci un codice TOTP valido o un codice di backup per disabilitare l'authenticator.`,totpDisabled:`App Authenticator disabilitata.`,emailOtpEnabled:`OTP via e-mail abilitato.`,emailOtpDisabled:`OTP via e-mail disabilitato.`,smtpRequired:`Configura e testa prima le impostazioni SMTP.`,invalidCode:`Codice non valido. Riprova.`,enableEmailOtp:`Abilita OTP via e-mail`,disableEmailOtp:`Disabilita OTP via e-mail`,emailSetupEnterCode:`È stato inviato un codice di verifica al tuo indirizzo e-mail. Inseriscilo qui sotto per confermare che possiedi questa casella di posta.`,verifyAndEnable:`Verifica e abilita`,emailDisablePasswordHint:`Inserisci la password del tuo account per confermare la disabilitazione dell'OTP via e-mail.`,passwordPlaceholder:`Inserisci la tua password`,backupCodesTitle:`Salva i tuoi codici di backup`,backupCodesWarning:`Conserva questi codici in un posto sicuro. Ogni codice può essere usato una sola volta.`,backupCodesRemaining:`{{count}} codici di backup rimanenti`,savedCodes:`Codici salvati`,regenBackup:`Rigenera codici di backup`,regenBackupHint:`Inserisci il tuo codice TOTP corrente per generare 10 nuovi codici di backup.`,newBackupCodes:`Nuovi codici di backup`,linkedAccounts:`Account SSO collegati`,linkedAccountsDesc:`Questi provider di identità esterni sono collegati al tuo account.`,oidcUnlinked:`Account scollegato.`},sessionPolicy:{title:`Criterio di sessione`,description:`Durata massima della sessione per i nuovi accessi utente. I token già emessi mantengono la scadenza originale.`,preset24h:`24 ore`,preset7d:`7 giorni`,preset30d:`30 giorni`,customHoursLabel:`Durata personalizzata della sessione in ore`,hoursSuffix:`ore`,warning:`Le sessioni più lunghe riducono la protezione di disconnessione automatica. Consigliato solo per installazioni mono-utente attendibili.`},oidc:{title:`Provider SSO / OIDC`,desc:`Configura provider OpenID Connect per il single sign-on.`,addProvider:`Aggiungi provider`,newProvider:`Nuovo provider`,empty:`Nessun provider OIDC configurato.`,created:`Provider creato.`,updated:`Provider aggiornato.`,deleted:`Provider eliminato.`,refreshIcon:`Aggiorna icona`,removeIcon:`Rimuovi icona`,iconRefreshed:`Icona aggiornata.`,iconRemoved:`Icona rimossa.`,iconFetchFailed:`Impossibile recuperare l'icona dall'URL del provider.`,deleteTitle:`Elimina provider`,deleteMessage:`Eliminare "{{name}}"? Tutti gli account collegati verranno disconnessi.`,form:{name:`Nome visualizzato`,issuerUrl:`URL emittente`,clientId:`ID client`,clientSecret:`Client secret`,scopes:`Scope`,iconUrl:`URL icona (opzionale)`,enabled:`Abilitato`,autoCreate:`Crea utenti automaticamente`,autoCreateDesc:`Crea automaticamente un account locale al primo accesso.`,autoLink:`Collega automaticamente gli account esistenti`,autoLinkDesc:`Collega gli account locali esistenti tramite email al primo accesso.`,secretHint:`lascia vuoto per mantenere`,secretPlaceholder:`nuovo segreto`,emailClaim:`Claim email`,emailClaimDesc:`Claim JWT usato come identità email. Usare 'preferred_username' o 'upn' per Azure Entra ID (che non invia email_verified). Usare solo nomi di claim affidabili.`,emailClaimPlaceholder:`e-mail`,emailClaimCustomClaimAutoLinkWarning:`I claim personalizzati sono sicuri per il collegamento automatico solo se il valore è gestito dal tenant (es. Azure Entra ID upn / preferred_username). Non abilitare il collegamento automatico se il tuo IdP consente agli utenti di auto-assegnare questo claim.`,requireEmailVerified:`Richiedi verifica email`,requireEmailVerifiedDesc:`Accetta il claim email solo se il provider lo contrassegna come verificato.`,requireEmailVerifiedWarning:`Attenzione: l'email sarà accettata senza verifica. Usare solo con provider affidabili.`,requireEmailVerifiedAutoLink:`Disabilitare prima il collegamento automatico per modificare questa impostazione.`,defaultGroup:`Gruppo predefinito`,defaultGroupDesc:`Gruppo assegnato agli utenti creati automaticamente. Ritorno a Viewers se non impostato.`,defaultGroupViewersFallback:`Viewers (predefinito)`,autologin:`Accesso automatico`,autologinDesc:`Reindirizza i visitatori non autenticati direttamente a questo provider. Solo un provider può avere questo flag.`}},encryption:{title:`Stato crittografia MFA`,enabledFromEnv:`Crittografia a riposo abilitata (chiave dalla variabile d'ambiente MFA_ENCRYPTION_KEY)`,enabledFromFile:`Crittografia a riposo abilitata (chiave caricata dalla directory dei dati)`,enabledGenerated:`Crittografia a riposo abilitata con chiave auto-generata`,notConfigured:`Crittografia a riposo non configurata`,notConfiguredDesc:`I segreti TOTP e i client_secrets OIDC sono memorizzati in chiaro. Imposta MFA_ENCRYPTION_KEY o riavvia Bambuddy con una directory dati scrivibile per generarne uno automaticamente.`,allEncrypted:`Tutti i segreti MFA sono crittografati a riposo.`,legacyRowsLabel:`Righe legacy in chiaro`,encryptedRowsLabel:`Righe crittografate`,legacyRowsWarning:`Rilevate {{count}} righe legacy in chiaro. Salva di nuovo il provider OIDC o re-iscrivi l'app authenticator dell'utente per migrare allo storage crittografato.`,backupHint:`La chiave generata automaticamente è memorizzata in DATA_DIR/.mfa_encryption_key ed è inclusa nei backup locali ZIP. Mantieni sicuri i tuoi backup o imposta MFA_ENCRYPTION_KEY esplicitamente.`,decryptionBrokenTitle:`Chiave di crittografia mancante`,decryptionBrokenError:`{{count}} record crittografati non possono essere decifrati perché la chiave di crittografia non è più disponibile. Ripristina il precedente MFA_ENCRYPTION_KEY o DATA_DIR/.mfa_encryption_key per recuperare.`,migrationErrorWarning:`{{count}} riga/righe legacy non sono state ricifrate all'avvio. Controlla i log del server e riavvia Bambuddy per riprovare.`},spoolbuddy:{infoTitle:`Dispositivi SpoolBuddy`,infoBody:`I kiosk SpoolBuddy si registrano automaticamente tramite heartbeat. Annulla la registrazione qui se un dispositivo non è più in uso o se un duplicato obsoleto è rimasto dopo un crash del daemon.`,duplicatesTitle:`{{count}} dispositivi registrati`,duplicatesBody:`Solo il primo dispositivo registrato viene utilizzato dall'interfaccia kiosk. Se uno di questi è un duplicato obsoleto da un crash, annulla la sua registrazione — un dispositivo online si ri-registrerà al prossimo heartbeat.`,empty:`Nessun dispositivo SpoolBuddy registrato.`,online:`Online`,offline:`Offline`,unregister:`Annulla registrazione`,unregisterSuccess:`Dispositivo deregistrato`,unregisterError:`Deregistrazione non riuscita`,confirmTitle:`Annullare la registrazione del dispositivo SpoolBuddy?`,confirmBody:`Questo rimuoverà "{{hostname}}" ({{deviceId}}) dal database. Se il dispositivo è online, si ri-registrerà al prossimo heartbeat.`,ipAddress:`Indirizzo IP`,firmware:`Firmware`,lastSeen:`Ultimo rilevamento`,daemonUptime:`Uptime del daemon`,systemUptime:`Uptime sistema`,never:`mai`,nfc:`NFC`,scale:`Bilancia`,cpuTemp:`Temp. CPU`,cpuLoad:`Carico CPU`,memory:`Memoria`,disk:`Disco`,update:`Aggiorna`,updateConfirmTitle:`Aggiornare il daemon Spoolbuddy?`,updateConfirmBody:`Avviare un aggiornamento software su "{{hostname}}"? Il daemon si riavvierà al termine dell'aggiornamento.`,restartBrowser:`Riavvia browser`,restartBrowserConfirmTitle:`Riavviare il browser del kiosk?`,restartBrowserConfirmBody:`Riavviare il browser del kiosk su "{{hostname}}"? Il display si oscurerà brevemente.`,restartDaemon:`Riavvia daemon`,restartDaemonConfirmTitle:`Riavviare il daemon Spoolbuddy?`,restartDaemonConfirmBody:`Riavviare il daemon Spoolbuddy su "{{hostname}}"? Il dispositivo sarà offline per alcuni secondi.`,reboot:`Riavvia`,rebootConfirmTitle:`Riavviare il dispositivo?`,rebootConfirmBody:`Riavviare "{{hostname}}"? Il dispositivo sarà offline per circa un minuto.`,shutdown:`Spegni`,shutdownConfirmTitle:`Spegnere il dispositivo?`,shutdownConfirmBody:`Spegnere "{{hostname}}"? Sarà necessario un accesso fisico per riaccenderlo.`,commandConfirm:`Conferma`,commandQueued:`Comando in coda`,commandError:`Invio comando non riuscito`},pipelineLimits:{title:`Limiti pipeline dello slicer`,maxCopiesLabel:`Copie massime per esecuzione`,maxCopiesDesc:`Limite superiore alle copie che gli operatori possono richiedere durante l'esecuzione di una pipeline. Il limite massimo lato server è 1000.`},pipelines:{title:`Pipeline dello Slicer`,subtitle:`Bundle di preset riutilizzabili (stampante + processo + filamenti + tipo di piatto). Salvane uno dal dialogo Slice e applicalo con un clic al file successivo.`,loading:`Caricamento pipeline…`,loadError:`Impossibile caricare le pipeline.`,confirmDelete:`Eliminare questa pipeline? L'operazione non può essere annullata.`,staleWarning:`Uno o più preset referenziati non esistono più. Risalva questa pipeline dal dialogo Slice per ripararla.`,empty:{title:`Nessuna pipeline ancora.`,howto:`Apri il dialogo Slice per un file, scegli stampante / processo / filamenti / piatto, poi clicca "Salva come pipeline". Le tue pipeline salvate appariranno qui.`},field:{name:`Nome pipeline`,description:`Descrizione`,targetPrinter:`Stampante di destinazione`,noTarget:`— Nessuna destinazione —`,targetKind:`Tipo destinazione`,targetKindSpecific:`Stampante specifica`,targetKindClass:`Classe stampante`,targetModelClass:`Modello stampante`,fanoutStrategy:`Strategia di distribuzione`,fanout:{max_parallel:`Max parallelo — distribuisci su qualsiasi stampante libera corrispondente`,round_robin:`Round robin — alterna tra stampanti idonee`,fill_one_first:`Riempi una prima — assegna tutte le copie a una stampante`},fanoutShort:{max_parallel:`parallelo`,round_robin:`round robin`,fill_one_first:`prima una`}},action:{save:`Salva`,cancel:`Annulla`,rename:`Rinomina`,delete:`Elimina`},slot:{printer:`Stampante`,process:`Processo`,filament:`Filamento`,filamentN:`Filamento {{n}}`,filamentAll:`Tutti i {{n}} slot`,bed:`Piatto`},group:{profiles:`Profili`,filaments:`Filamenti`},searchPlaceholder:`Cerca pipeline…`,filterTargetType:`Filtra per tipo di destinazione`,filterTarget:`Filtra per destinazione`,filter:{all:`Tutte le destinazioni`,noTarget:`Nessuna destinazione`,count:`{{shown}} / {{total}}`,noMatches:`Nessuna pipeline corrisponde ai filtri attuali.`},toast:{saved:`Pipeline salvata`,saveFailed:`Salvataggio non riuscito`,deleted:`Pipeline eliminata`,deleteFailed:`Eliminazione non riuscita`},noTargetHint:`Imposta una stampante di destinazione per eseguire`,noTargetWarning:`Imposta una stampante di destinazione prima di eseguire questa pipeline.`,runs:{lastRun:`Ultima esecuzione`,status:{queued:`in coda`,slicing:`slicing`,dispatching:`invio`,in_progress:`stampa`,completed:`completata`,failed:`fallita`,partial_failure:`fallimento parziale`,cancelled:`annullata`}}}},notification:{printStarted:{title:`Stampa avviata`,body:`{{printer}}: {{filename}} ha iniziato a stampare`},printCompleted:{title:`Stampa completata`,body:`{{printer}}: {{filename}} completata con successo`},printFailed:{title:`Stampa fallita`,body:`{{printer}}: {{filename}} fallita`},printStopped:{title:`Stampa interrotta`,body:`{{printer}}: {{filename}} interrotta`},printProgress:{title:`Avanzamento stampa`,body:`{{printer}}: {{filename}} al {{percent}}% completamento`},printerOffline:{title:`Stampante offline`,body:`{{printer}} e offline`},printerError:{title:`Errore stampante`,body:`{{printer}} – {{error}}`},filamentLow:{title:`Filamento in esaurimento`,body:`{{printer}}: Filamento in esaurimento`},maintenanceDue:{title:`Manutenzione dovuta`,body:`{{printer}}: {{items}} richiedono attenzione`}},errors:{generic:`Qualcosa e andato storto`,networkError:`Errore di rete. Controlla la connessione.`,notFound:`Non trovato`,unauthorized:`Non autorizzato`,serverError:`Errore server`,validationError:`Controlla i dati inseriti`,printerConnectionFailed:`Connessione alla stampante fallita`,saveFailed:`Salvataggio modifiche fallito`,deleteFailed:`Eliminazione fallita`,loadFailed:`Caricamento dati fallito`},hmsErrors:{title:`Errori - {{name}}`,noErrors:`Nessun errore`,viewOnWiki:`Vedi su Bambu Lab Wiki`,mqttVerifyFailedRemedy:`Attiva la modalita sviluppatore sulla stampante, riavvia la stampante e avvia di nuovo il lavoro.`,unknownCode:`Codice HMS sconosciuto — consulta la wiki di Bambu Lab per i dettagli.`,clearInstructions:`Cancella gli errori sulla stampante per rimuoverli qui.`,clearErrors:`Cancella errori`,clearSuccess:`Errori HMS cancellati`,clearFailed:`Impossibile cancellare gli errori HMS`,actionSuccess:`Azione inviata alla stampante`,actionFailed:`Impossibile inviare l'azione`,runoutExpectedSlot:`Il filamento in {{ranOut}} è esaurito. La stampante ora attende filamento compatibile in {{expected}}. Inserisci una bobina in {{expected}}, quindi seleziona Riprova.`,runoutExpectedSlotOnly:`La stampante attende filamento compatibile in {{expected}}. Inserisci lì una bobina, quindi seleziona Riprova.`,runoutSlotUnknown:`Il filamento è esaurito e la stampa è in pausa. Bambuddy non è riuscito a determinare quale slot la stampante attende ora — controlla lo schermo della stampante per lo slot richiesto.`,actions:{RESUME_PRINTING:`Riprendi stampa`,RESUME_PRINTING_DEFECTS:`Riprendi (difetti accettabili)`,RESUME_PRINTING_PROBELM_SOLVED:`Riprendi (problema risolto)`,STOP_PRINTING:`Ferma stampa`,CHECK_ASSISTANT:`Apri assistente`,FILAMENT_EXTRUDED:`Filamento estruso, continua`,RETRY_FILAMENT_EXTRUDED:`Non ancora estruso, riprova`,CONTINUE:`Completato, continua`,LOAD_VIRTUAL_TRAY:`Carica filamento`,OK_BUTTON:`OK`,FILAMENT_LOAD_RESUME:`Filamento caricato, riprendi`,JUMP_TO_LIVEVIEW:`Visualizza in diretta`,NO_REMINDER_NEXT_TIME:`Non ricordare la prossima volta`,REFRESH_NOZZLE:`Ricontrolla`,IGNORE_NO_REMINDER_NEXT_TIME:`Ignora e non ricordare`,IGNORE_RESUME:`Ignora e riprendi`,PROBLEM_SOLVED_RESUME:`Problema risolto, riprendi`,TURN_OFF_FIRE_ALARM:`Capito, spegni allarme antincendio`,RETRY_PROBLEM_SOLVED:`Riprova (problema risolto)`,CANCLE:`Annulla`,STOP_DRYING:`Ferma essiccazione`,PROCEED:`Procedi`,OK_JUMP_RACK:`OK`,ABORT:`Annulla`,DISABLE_PURIFICATION:`Disattiva purificazione per questa stampa`,DONT_REMIND_NEXT_TIME:`Non ricordarmelo`,DBL_CHECK_CANCEL:`Annulla`,DBL_CHECK_DONE:`Fatto`,DBL_CHECK_RETRY:`Riprova`,DBL_CHECK_RESUME:`Riprendi`,DBL_CHECK_OK:`Conferma`,REMOVE_CLOSE_BTN:`Chiudi`}},mqttDebug:{title:`Log debug MQTT`,searchPlaceholder:`Cerca topic o payload...`,noMessages:`Nessun messaggio registrato`,startLoggingHint:`Clicca "Avvia logging" per iniziare a catturare messaggi MQTT`,noMessagesMatch:`Nessun messaggio corrisponde al filtro`,adjustFilterHint:`Prova a modificare la ricerca o i filtri`,incoming:`In ingresso`,outgoing:`In uscita`,loggingStopped:`Logging fermato`,loggingActive:`Logging attivo - i messaggi si aggiornano automaticamente`,startLogging:`Avvia logging`,stopLogging:`Ferma logging`,clearLog:`Pulisci log`,topic:`Argomento`,timestamp:`Timestamp`,direction:`Direzione`,all:`Tutti`},printerFiles:{zipStarted_one:`Download ZIP avviato per {{count}} file`,zipStarted_other:`Download ZIP avviato per {{count}} file`,zipPartial:`Download ZIP avviato con {{successful}} file su {{total}}; non è stato possibile recuperare gli altri`,downloadFailed:`Download non riuscito: {{error}}`,unknownError:`Errore sconosciuto`,shiftSelectHint:`Maiusc-clic per selezionare un intervallo`,selectFile:`Seleziona {{name}}`,deselectFile:`Deseleziona {{name}}`,title:`Gestore file`,storageUsed:`Usato:`,storageFree:`Libero:`,filterPlaceholder:`Filtra file...`,deleteButton:`Elimina`,deleteFiles:`Elimina {{count}} file`,deleteFileConfirm:`Eliminare "{{name}}"? Questa azione non può essere annullata.`,deleteFilesConfirm:`Eliminare {{count}} file selezionati? Questa azione non può essere annullata.`,noFiles:`Nessun file sulla stampante`,printerUnavailable:`Il servizio file della stampante non è disponibile. Riprova quando la stampante è raggiungibile.`,loadingFiles:`Caricamento file...`,failedToLoad:`Caricamento file fallito`,toast:{filesDeleted:`Eliminati {{count}} file`,deleteFailed:`Eliminazione fallita: {{error}}`}},confirm:{delete:`Sei sicuro di voler eliminare questo?`,unsavedChanges:`Hai modifiche non salvate. Sei sicuro di voler uscire?`,clearQueue:`Sei sicuro di voler svuotare la coda?`},login:{title:`Login Bambuddy`,subtitle:`Accedi al tuo account`,username:`Nome utente`,usernamePlaceholder:`Inserisci il nome utente`,usernameOrEmail:`Nome utente o email`,usernameOrEmailPlaceholder:`Nome utente o @ Email`,password:`Password`,passwordPlaceholder:`Inserisci la password`,signIn:`Accedi`,signingIn:`Accesso in corso...`,rememberMe:`Ricordami`,forgotPassword:`Hai dimenticato la password?`,autologinFailed:`Accesso SSO automatico fallito. Scegli un provider qui sotto per continuare.`,localDisabledNotice:`L'accesso locale è disabilitato. Usa uno dei provider SSO qui sotto.`,loginSuccess:`Accesso riuscito`,loginFailed:`Accesso fallito`,enterCredentials:`Inserisci nome utente e password`,enterEmail:`Inserisci il tuo indirizzo e-mail`,oidcLoginFailed:`Accesso OIDC fallito`,oidcErrors:{providerError:`Il provider di identità ha restituito un errore`,missingParameters:`Parametri obbligatori mancanti nel callback OIDC`,invalidState:`Lo stato OIDC non è valido o è già stato utilizzato`,stateExpired:`La sessione OIDC è scaduta — riprovare`,providerNotFound:`Provider OIDC non trovato`,discoveryFailed:`Impossibile recuperare il documento di discovery OIDC`,invalidDiscovery:`Il documento di discovery OIDC non è valido`,networkError:`Errore di rete durante lo scambio di token OIDC`,badResponse:`Risposta inattesa durante lo scambio di token OIDC`,noIdToken:`Il provider OIDC non ha restituito un ID token`,validationFailed:`La validazione del token OIDC non è riuscita`,nonceMismatch:`Il nonce OIDC non corrisponde — possibile attacco di replay`,missingSubClaim:`Il token OIDC è privo del claim sub`,noLinkedAccount:`Nessun account locale è collegato a questa identità OIDC`,accountInactive:`Il tuo account è inattivo`,userResolutionFailed:`Impossibile risolvere il tuo account`,internalError:`Si è verificato un errore interno durante il login OIDC`,tokenExchangeFailed:`Lo scambio di token OIDC non è riuscito`},forgotPasswordTitle:`Password dimenticata`,forgotPasswordMessage:`Se hai dimenticato la password, contatta il tuo amministratore di sistema per reimpostarla.`,forgotPasswordEmailMessage:`Inserisci il tuo indirizzo email e ti invieremo una nuova password.`,emailAddress:`Indirizzo email`,emailPlaceholder:`tua.email@esempio.com`,cancel:`Annulla`,sending:`Invio...`,sendResetEmail:`Invia email di reimpostazione`,howToReset:`Come reimpostare la password:`,resetStep1:`Contatta il tuo amministratore Bambuddy`,resetStep2:`Chiedi di reimpostare la password in Gestione utenti`,resetStep3:`Possono impostare una nuova password temporanea`,resetStep4:`Accedi con la nuova password e cambiala in Impostazioni`,gotIt:`Capito`,twoFA:{title:`Autenticazione a due fattori`,subtitle:`Il tuo account è protetto da 2FA. Inserisci il codice di verifica qui sotto.`,methodAuthenticator:`App di autenticazione`,methodEmail:`Codice via e-mail`,methodBackup:`Codice di recupero`,instructionsTotp:`Apri la tua app di autenticazione e inserisci il codice a 6 cifre per Bambuddy.`,instructionsEmail:`Un codice a 6 cifre è stato inviato al tuo indirizzo e-mail. È valido per 10 minuti.`,instructionsEmailNotSent:`Clicca il pulsante qui sotto per ricevere un codice di verifica via e-mail.`,instructionsBackup:`Inserisci uno dei tuoi codici di recupero a 8 caratteri. Ogni codice può essere utilizzato una sola volta.`,sendCodeButton:`Invia codice via e-mail`,sendingCode:`Invio in corso...`,resendCode:`Invia nuovamente il codice`,codeLabel:`Codice di verifica`,backupCodeLabel:`Codice di recupero`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Verifica`,verifyingButton:`Verifica in corso...`,backToLogin:`← Torna alla pagina di accesso`,orContinueWith:`oppure accedi con`,signInWith:`Accedi con {{provider}}`,enterCode:`Inserisci il codice di verifica`,sendCodeFailed:`Invio del codice di verifica non riuscito`,invalidCode:`Codice non valido. Riprova.`},resetPassword:{title:`Imposta nuova password`,subtitle:`Inserisci e conferma la nuova password qui sotto.`,newPassword:`Nuova password`,newPasswordPlaceholder:`Almeno 8 caratteri`,confirmPassword:`Conferma password`,confirmPasswordPlaceholder:`Ripeti la nuova password`,saving:`Salvataggio…`,submit:`Imposta nuova password`,backToLogin:`Torna al login`,passwordsDoNotMatch:`Le password non coincidono`,passwordTooShort:`La password deve avere almeno 8 caratteri`,resetFailed:`Reimpostazione non riuscita. Il link potrebbe essere scaduto.`}},setup:{title:`Configurazione Bambuddy`,subtitle:`Configura autenticazione per la tua istanza Bambuddy`,enableAuth:`Abilita autenticazione`,adminAccount:`Account admin`,adminAccountDesc:`Se esistono già admin, l'autenticazione verrà abilitata usando gli account esistenti. Lascia i campi sotto vuoti per usare gli admin esistenti, oppure inserisci nuove credenziali per creare un nuovo utente admin.`,adminUsername:`Nome utente admin`,adminPassword:`Password admin`,optionalIfAdminExists:`(opzionale se esistono admin)`,adminUsernamePlaceholder:`Inserisci nome utente admin (opzionale)`,adminPasswordPlaceholder:`Inserisci password admin (opzionale)`,confirmPassword:`Conferma password`,confirmPasswordPlaceholder:`Conferma password admin`,settingUp:`Configurazione...`,completeSetup:`Completa configurazione`,toast:{authEnabledAdminCreated:`Autenticazione abilitata e utente admin creato`,authEnabledExistingAdmins:`Autenticazione abilitata usando admin esistenti`,setupCompleted:`Configurazione completata`,enterBothCredentials:`Inserisci nome utente e password admin, oppure lascia entrambi vuoti per usare admin esistenti`,passwordsDoNotMatch:`Le password non coincidono`,passwordTooShort:`La password deve essere di almeno 6 caratteri`}},changePassword:{title:`Cambia password`,currentPassword:`Password attuale`,currentPasswordPlaceholder:`Inserisci password attuale`,newPassword:`Nuova password`,newPasswordPlaceholder:`Inserisci nuova password (min 6 caratteri)`,confirmPassword:`Conferma nuova password`,confirmPasswordPlaceholder:`Conferma nuova password`,passwordsDoNotMatch:`Le password non coincidono`,passwordTooShort:`La password deve essere di almeno 6 caratteri`,changing:`Modifica in corso...`,success:`Password cambiata con successo`,failed:`Modifica password fallita`},plateAlert:{title:`Stampa in pausa!`,message:`Oggetti rilevati sul piatto. La stampa è stata messa automaticamente in pausa. Svuota il piatto e riprendi la stampa.`,understand:`Ho capito`},camera:{title:`Vista camera`,invalidPrinterId:`ID stampante non valido`,live:`Live`,snapshot:`Istantanea`,restartStream:`Riavvia stream`,refreshSnapshot:`Aggiorna snapshot`,fullscreen:`Schermo intero`,exitFullscreen:`Esci da schermo intero`,connectingToCamera:`Connessione alla camera...`,capturingSnapshot:`Acquisizione snapshot...`,connectionLost:`Connessione persa`,connectionFailed:`Connessione camera fallita`,reconnecting:`Riconnessione tra {{countdown}}s... (tentativo {{attempt}}/{{max}})`,reconnectNow:`Riconnetti ora`,cameraUnavailable:`Camera non disponibile`,cameraUnavailableDesc:`Assicurati che la stampante sia accesa e connessa.`,noCamera:`Nessuna camera disponibile`,retry:`Riprova`,cameraStream:`Stream camera`,zoomOut:`Zoom indietro`,zoomIn:`Zoom avanti`,resetZoom:`Reimposta zoom`,recording:`Registrazione`,startRecording:`Avvia registrazione`,stopRecording:`Ferma registrazione`,chamberLight:`Accendi/Spegni luce camera`,unavailable:`Telecamera non disponibile`,diagnose:{button:`Diagnostica`,modalTitle:`Diagnostica telecamera`,running:`Diagnostica in corso...`,runFailed:`Impossibile eseguire la diagnostica: {{error}}`,retry:`Riesegui`,stage:{tcp_reachable:`Raggiungibilità di rete`,first_frame:`Acquisizione frame`,live_stream_active:`Stream live attivo`},summary:{all_ok:`La telecamera funziona. La diagnostica ha completato tutte le fasi con successo.`,live_stream_active_healthy:`La telecamera sta trasmettendo con frame recenti — nessun test necessario.`,printer_unreachable:`La stampante non è raggiungibile. Verifica l'indirizzo IP, la connessione di rete e che la stampante sia accesa.`,camera_port_closed:`La stampante risponde ma la porta della telecamera è chiusa. Assicurati che la modalità LAN e la modalità sviluppatore siano attive nelle impostazioni della stampante.`,no_frame:`Connessione alla telecamera riuscita ma nessun frame ricevuto. Riprova o verifica che la telecamera sia abilitata nelle impostazioni della stampante.`,unknown_failure:`Diagnostica della telecamera fallita per motivo sconosciuto. Controlla il log di supporto per i dettagli.`},meta:{protocol:`Protocollo`,port:`Porta`,profile:`Profilo`}}},groups:{title:`Gestione gruppi`,subtitle:`Gestisci gruppi permessi per controllo accesso`,backToSettings:`Torna a Impostazioni`,createGroup:`Crea gruppo`,noPermission:`Non hai il permesso di accedere a questa pagina.`,system:`Sistema`,noDescription:`Nessuna descrizione`,usersCount:`{{count}} utenti`,permissionsCount:`{{count}} permessi`,edit:`Modifica`,delete:`Elimina`,toast:{created:`Gruppo creato con successo`,updated:`Gruppo aggiornato con successo`,deleted:`Gruppo eliminato con successo`,enterGroupName:`Inserisci un nome gruppo`},modal:{editGroup:`Modifica gruppo`,createGroup:`Crea gruppo`,cancel:`Annulla`,saving:`Salvataggio...`,creating:`Creazione...`,saveChanges:`Salva modifiche`},form:{groupName:`Nome gruppo`,groupNamePlaceholder:`Inserisci nome gruppo`,systemGroupWarning:`I nomi dei gruppi di sistema non possono essere modificati`,description:`Descrizione`,descriptionPlaceholder:`Inserisci descrizione (opzionale)`,permissions:`Permessi ({{count}} selezionati)`},deleteModal:{title:`Elimina gruppo`,message:`Sei sicuro di voler eliminare questo gruppo? Gli utenti in questo gruppo perderanno questi permessi.`,confirm:`Elimina gruppo`},editor:{title:`Modifica gruppo`,createTitle:`Crea gruppo`,search:`Cerca permessi...`,selectAll:`Seleziona tutto`,clearAll:`Deseleziona tutto`,permissionsSelected:`{{count}} selezionati`,noResults:`Nessun permesso corrisponde alla ricerca`,websocketHint:`Necessario per gli aggiornamenti in tempo reale. Senza questo permesso, l'interfaccia ripiega sul polling periodico.`}},users:{title:`Gestione utenti`,subtitle:`Gestisci utenti e accesso alla tua istanza Bambuddy`,backToSettings:`Torna a Impostazioni`,createUser:`Crea utente`,noPermission:`Non hai il permesso di accedere a questa pagina.`,admin:`Amministratore`,noGroups:`Nessun gruppo`,active:`Attivo`,inactive:`Inattivo`,edit:`Modifica`,delete:`Elimina`,system:`Sistema`,noGroupsAvailable:`Nessun gruppo disponibile`,table:{username:`Nome utente`,groups:`Gruppi`,status:`Stato`,actions:`Azioni`},toast:{created:`Utente creato con successo`,updated:`Utente aggiornato con successo`,deleted:`Utente eliminato con successo`,fillRequired:`Compila tutti i campi obbligatori`,passwordsDoNotMatch:`Le password non coincidono`,passwordTooShort:`La password deve essere di almeno 6 caratteri`,ldapProvisioned:`Utente LDAP "{{username}}" provisionato`},modal:{createUser:`Crea utente`,editUser:`Modifica utente`,cancel:`Annulla`,creating:`Creazione...`,saving:`Salvataggio...`,saveChanges:`Salva modifiche`,advancedAuthSubtitle:`con autenticazione avanzata`,tabsAriaLabel:`Origine utente`,localTab:`Locale`,ldapTab:`LDAP`,ldapSearchLabel:`Cerca nella directory`,ldapSearchPlaceholder:`Digita un nome utente, nome o e-mail...`,ldapMinChars:`Digita almeno 2 caratteri per cercare`,ldapTypeToSearch:`Inizia a digitare per cercare nella directory LDAP`,ldapSearching:`Ricerca nella directory...`,ldapNoResults:`Nessun utente corrispondente nella directory`,ldapSearchError:`Ricerca nella directory fallita. Verifica lo stato del server LDAP.`,ldapAlreadyProvisioned:`Già provisionato`,ldapSelectedLabel:`Selezionato`,ldapProvision:`Provisiona utente`,ldapProvisioning:`Provisioning...`,ldapErrorProvision:`Provisioning fallito. Verifica lo stato del server LDAP e riprova.`},form:{username:`Nome utente`,usernamePlaceholder:`Inserisci nome utente`,email:`E-mail`,emailPlaceholder:`utente@esempio.com`,password:`Password`,passwordPlaceholder:`Inserisci password`,confirmPassword:`Conferma password`,confirmPasswordPlaceholder:`Conferma password`,newPasswordPlaceholder:`Inserisci nuova password`,confirmNewPasswordPlaceholder:`Conferma nuova password`,leaveBlankToKeep:`lascia vuoto per mantenere attuale`,groups:`Gruppi`,optional:`opzionale`,autoGeneratedPassword:`Una password sicura verrà generata automaticamente e inviata via email all'utente.`,passwordManagedByAdvancedAuth:`La password è gestita dall'autenticazione avanzata. Usa "Reimposta password" per inviare una nuova password all'utente via email.`,resetPassword:`Reimposta password`,resettingPassword:`Reimpostazione password...`},deleteModal:{title:`Elimina utente`,message:`Sei sicuro di voler eliminare questo utente? Questa azione non può essere annullata.`,confirm:`Elimina utente`}},streamOverlay:{title:`Overlay stream`,invalidPrinterId:`ID stampante non valido`,cameraStream:`Stream camera`,progress:`Avanzamento`,eta:`ETA`,printerIdle:`Stampante inattiva`,printerOffline:`Stampante offline`,builder:{title:`Overlay per streaming`,description:`Compone l'URL di un overlay per streaming: una vista telecamera a schermo intero con i dati di stampa in tempo reale sovrapposti, per OBS, un display a parete o qualsiasi sorgente browser. Scegli i campi e copia l'URL.`,printer:`Stampante`,size:`Dimensione del testo`,sizeSmall:`Piccola`,sizeMedium:`Media`,sizeLarge:`Grande`,fps:`Frequenza fotogrammi`,fpsHint:`Le telecamere A1 e P1 si fermano intorno a 5 fps, qualunque valore venga richiesto.`,token:`Token overlay (facoltativo)`,tokenHint:`Serve solo con il login attivo: OBS non ha una sessione propria. Creane uno sopra con ambito Overlay per streaming.`,tokenWarning:`Questo URL contiene un token: chi riesce a leggerlo può vedere lo streaming e il nome del file. Revoca il token per interrompere l'accesso.`,fields:`Campi da mostrare`,fieldPrinter:`Nome stampante`,fieldFilename:`Nome file`,fieldStatus:`Stato`,fieldProgress:`Barra di avanzamento`,fieldLayers:`Numero di layer`,fieldEta:`Tempo rimanente e orario di fine`,fieldCamera:`Immagine telecamera`,chamberHint:`La temperatura della camera compare solo sui modelli con un vero sensore: P1 e A1 riportano un valore privo di significato, quindi viene omessa.`,urlTitle:`URL overlay`,open:`Apri`,showPreview:`Mostra anteprima`,hidePreview:`Nascondi anteprima`,previewTitle:`Anteprima overlay`},status:{printing:`In stampa`,paused:`In pausa`,finished:`Completata`,failed:`Fallita`,idle:`Inattiva`,unknown:`Sconosciuto`}},profiles:{title:`Profili`,subtitle:`Gestisci preset slicer e calibrazioni pressure advance`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Profili locali`,kprofiles:`Profili K`},orcaCloud:{connectedAs:`Connesso come`,connectedShort:`Connesso a Orca Cloud`,logout:`Disconnetti`,noLogoutPermission:`Non hai il permesso di disconnetterti`,noConnectPermission:`Non hai il permesso di connetterti a Orca Cloud`,retry:`Riprova`,connectButton:`Connetti Orca Cloud`,connect:{title:`Connetti a Orca Cloud`,description:`Accedi al tuo account Orca Cloud per sincronizzare i profili dello slicer in Bambuddy.`},device:{title:`Approva Bambuddy in Orca Cloud`,instruction:`Apri Orca Cloud e approva questo codice. Bambuddy si connette automaticamente non appena approvi.`,codeLabel:`Il tuo codice di associazione`,openButton:`Apri la pagina di approvazione di Orca Cloud`,manualHint:`Oppure vai su {{url}} e inserisci il codice qui sopra.`,waiting:`In attesa della tua approvazione…`,cancel:`Annulla`},profiles:{title:`I tuoi profili Orca Cloud ({{count}})`,refresh:`Aggiorna`,empty:`Nessun profilo trovato nel tuo account Orca Cloud.`},toast:{disconnected:`Disconnesso da Orca Cloud`},errors:{startFailed:`Impossibile avviare l'accesso a Orca Cloud.`,denied:`L'associazione è stata rifiutata in Orca Cloud.`,expired:`Il codice di associazione è scaduto. Fai clic su Connetti per riprovare.`,pollFailed:`Connessione persa durante l'attesa dell'approvazione. Riprova.`}},localProfiles:{title:`Profili locali`,subtitle:`Importa e gestisci preset slicer da OrcaSlicer`,import:`Importa profili`,importDesc:`Trascina file .bbscfg, .bbsflmt, .orca_filament, .zip o .json qui`,importing:`Importazione...`,search:`Cerca preset locali...`,noPresets:`Nessun preset locale ancora`,noSearchResults:`Nessun preset corrisponde alla ricerca`,badge:`Locale`,edit:`Modifica`,delete:`Elimina`,cancel:`Annulla`,deleteConfirmTitle:`Elimina preset`,deleteConfirm:`Sei sicuro di voler eliminare questo preset? Questa azione non può essere annullata.`,source:`Fonte`,inheritsFrom:`Eredita da`,filamentType:`Tipo`,vendor:`Produttore`,compatiblePrinters:`Stampanti`,nozzleTemp:`Temp. ugello`,cost:`Costo`,density:`Densità`,pressureAdvance:`Pressure Advance`,filament:`Filamento`,process:`Processo`,printer:`Stampante`,toast:{importSuccess:`{{count}} preset importati`,importSkipped:`{{count}} preset saltati (duplicati)`,importError:`{{count}} errori durante l'importazione`,deleted:`Preset eliminato`,updated:`Preset aggiornato`}},connectedAs:`Connesso come`,signInExpiredTitle:`Accesso a Bambu Cloud scaduto`,signInExpiredBody:`Bambu Lab non accetta più il token salvato. Accedi di nuovo per ripristinare i profili cloud, le importazioni da MakerWorld e i controlli del firmware.`,logout:`Esci`,noLogoutPermission:`Non hai il permesso di disconnetterti`,failedToLoad:`Caricamento profili fallito`,retry:`Riprova`,time:{justNow:`Proprio ora`,minsAgo:`{{count}}m fa`,hoursAgo:`{{count}}h fa`,daysAgo:`{{count}}g fa`},toast:{loggedOut:`Disconnesso`},login:{title:`Connetti a Bambu Cloud`,subtitle:`Sincronizza i preset del slicer tra dispositivi`,email:`E-mail`,password:`Password`,region:`Regione`,regionGlobal:`Globale`,regionChina:`Cina`,verificationCode:`Codice di verifica`,totpCode:`Codice autenticatore`,checkEmail:`Controlla la tua email ({{email}}) per un codice a 6 cifre`,enterTotpHint:`Inserisci il codice a 6 cifre dalla tua app autenticatore`,accessToken:`Token di accesso`,accessTokenHint:`Incolla il tuo access token Bambu Cloud. Gli account della regione Cina devono usare questa via (vincolati al numero di telefono — login via e-mail non disponibile). Il wiki spiega come recuperare il token dai cookie di MakerWorld.`,back:`Indietro`,loginButton:`Accedi`,verifyButton:`Verifica`,setTokenButton:`Imposta token`,useToken:`Usa access token invece`,captchaTitle:`Bambu Cloud richiede un CAPTCHA`,captchaBody:`Bambu sta richiedendo un CAPTCHA alla tua rete prima di accettare un accesso, e la verifica non può essere completata da Bambuddy. Email e password non sono il problema. Il blocco è legato al tuo indirizzo IP pubblico e di solito si risolve da solo entro qualche ora; riprovare di continuo lo prolunga. Per accedere subito, usa invece un token di accesso preso da una sessione del browser.`,useEmail:`Accedi con email invece`,toast:{loggedIn:`Accesso riuscito`,codeSent:`Codice di verifica inviato via email`,enterTotp:`Inserisci il codice dalla tua app autenticatore`,tokenSet:`Token impostato con successo`}},presets:{myPreset:`Il mio preset (modificabile)`,duplicate:`Duplica`,editable:`Modificabile`,failedToLoadDetails:`Caricamento dettagli preset fallito`,deleteConfirm:`Eliminare questo preset?`,deleteWarning:`Questo eliminerà definitivamente "{{name}}" da Bambu Cloud. Questa azione non può essere annullata.`,noDuplicatePermission:`Non hai il permesso di duplicare preset`,noEditPermission:`Non hai il permesso di modificare preset`,noDeletePermission:`Non hai il permesso di eliminare preset`,types:{filament:`Preset filamento`,printer:`Preset stampante`,process:`Preset processo`},toast:{deleted:`Preset eliminato`,created:`Preset creato`,updated:`Preset aggiornato`,duplicated:`Preset duplicato`,fieldAdded:`Campo "{{key}}" aggiunto`,exported:`Preset esportato`},baseLabel:`Base: {{name}}`,currentLabel:`Corrente: {{name}}`,newPreset:`Nuovo preset`,editPreset:`Modifica preset`,duplicatePreset:`Duplica preset`,createNewPreset:`Crea nuovo preset`,customizeSettings:`Personalizza le impostazioni per il nuovo preset`,compareWithBase:`Confronta con base`,compare:`Confronta`,basePreset:`Preset base`,selectBasePreset:`Seleziona preset base...`,presetName:`Nome preset`,myCustomPreset:`Il mio preset personalizzato`,inheritsFrom:`Deriva da`,dropJsonToImport:`Rilascia JSON per importare`,tabs:{common:`Comune`,allFields:`Tutti i campi`},availableFields:`Campi disponibili`,searchFieldsPlaceholder:`Cerca campi...`,noMatchingFields:`Nessun campo corrispondente`,allFieldsAdded:`Tutti i campi aggiunti`,addCustomField:`Aggiungi campo personalizzato`,yourOverrides:`Le tue override`,noOverridesYet:`Nessun override ancora`,clickFieldsToAdd:`Clicca i campi a sinistra per aggiungerli`,saveAsTemplate:`Salva come template`,jsonTip:`Suggerimento: trascina e rilascia un file .json ovunque in questa modale per importare impostazioni`},cloudView:{searchPlaceholder:`Cerca preset...`,templates:`Template`,refresh:`Aggiorna`,newPreset:`Nuovo preset`,clearFilters:`Pulisci filtri`,compareMode:`Modalita confronto`,selectAnotherPreset:`Seleziona un altro preset {{type}}`,clickTwoPresets:`Clicca due preset dello stesso tipo per confrontare`,selectFirst:`1. Seleziona il primo`,selectSecond:`2. Seleziona il secondo`,compareNow:`Confronta ora`,lastSynced:`Ultima sincronizzazione:`,showingCount:`Mostrati {{showing}} di {{total}} preset`,noPresetsFound:`Nessun preset trovato`,columns:{filament:`Filamento`,process:`Processo`,printer:`Stampante`},noFilamentPresets:`Nessun preset filamento`,noProcessPresets:`Nessun preset processo`,noPrinterPresets:`Nessun preset stampante`,filters:{type:`Tipo`,owner:`Proprietario`,printer:`Stampante`,nozzle:`Ugello`,filament:`Filamento`,layer:`Layer`,all:`Tutti`,myPresets:`I miei preset`,builtIn:`Integrati`,process:`Processo`},noTemplatesPermission:`Non hai il permesso di gestire i template`,noRefreshPermission:`Non hai il permesso di aggiornare i profili`,noCreatePermission:`Non hai il permesso di creare preset`},templates:{title:`Template rapidi`,noTemplates:`Nessun template ancora`,createFirst:`Crea template dall'editor preset`,typeFilter:`Tipo:`,deleteTitle:`Elimina template`,deleteWarning:`Questa azione non può essere annullata`,deleteConfirm:`Sei sicuro di voler eliminare "{{name}}"?`,namePlaceholder:`Nome template`,descriptionPlaceholder:`Descrizione`,settingsJson:`Impostazioni (JSON)`,fieldsCount:`{{count}} campi`,shownInModals:`Mostrati nelle modali`,hiddenInModals:`Nascosti nelle modali`,apply:`Applica`,toast:{deleted:`Template eliminato`,updated:`Template aggiornato`,created:`Template creato`,applied:`Template applicato`}}},support:{debugLoggingActive:`Log debug attivo`,manageLogs:`Gestisci`,collectItem7:`Connettività stampante e versioni firmware`,collectItem8:`Stato integrazioni (Spoolman, MQTT, HA)`,collectItem9:`Interfacce di rete (solo subnet)`,collectItem10:`Versioni dei pacchetti Python`,collectItem11:`Controlli di integrità del database`,collectItem12:`Dettagli dell'ambiente Docker`,bundleGenerating:`Generazione del pacchetto...`,bundleStepConnection:`Controlli di connettività delle stampanti in corso`,bundleStepVirtualPrinters:`Controlli di configurazione delle stampanti virtuali in corso`,bundleStepLogScan:`Analisi dei log recenti per problemi noti`,bundleStepBuild:`Creazione dello ZIP del pacchetto di supporto`},fileManager:{variants:{badge:`{{count}} versioni`,groupAction:`Raggruppa come versioni`,groupTooltip:`Segna questi file come lo stesso lavoro elaborato per stampanti diverse`,grouped:`{{count}} file raggruppati come versioni`,printAlternatives:`Stampa ({{count}} alternative)`},title:`Gestore file`,subtitle:`Organizza e gestisci i tuoi file di stampa`,uploadFiles:`Carica file`,newFolder:`Nuova cartella`,folderName:`Nome cartella`,folderNamePlaceholder:`es., Parti funzionali`,renameFile:`Rinomina file`,renameFolder:`Rinomina cartella`,invalidFilenameChar:`Il carattere "{{char}}" non è consentito nei nomi dei file di stampa. La scheda SD della stampante rifiuta: < > : " / \\ | ? *`,moveFiles:`Sposta {{count}} file`,rootNoFolder:`Root (nessuna cartella)`,current:`corrente`,linkFolder:`Collega cartella`,linkFolderDescription:`Collega "{{name}}" a un progetto o archivio per accesso rapido.`,project:`Progetto`,archive:`Archivio`,noProjectsFound:`Nessun progetto trovato`,noArchivesFound:`Nessun archivio trovato`,unlink:`Scollega`,link:`Collega`,dragDropFiles:`Trascina e rilascia file qui`,dropFilesHere:`Rilascia file qui`,releaseToUpload:`Rilascia per caricare`,orClickToBrowse:`oppure clicca per sfogliare`,allFileTypesSupported:`Tutti i tipi di file supportati. I file ZIP saranno estratti.`,zipFilesDetected:`File ZIP rilevati`,zipExtractOptions:`I file ZIP saranno estratti. Scegli come gestire la struttura cartelle:`,preserveZipStructure:`Mantieni struttura cartelle dal ZIP`,createFolderFromZip:`Crea cartella dal nome ZIP`,stlThumbnailGeneration:`Generazione miniature STL`,zipMayContainStl:`I file ZIP possono contenere STL. Le miniature possono essere generate durante l'estrazione.`,thumbnailsCanBeGenerated:`Le miniature possono essere generate per file STL. I modelli grandi possono richiedere più tempo.`,generateThumbnailsForStl:`Genera miniature per file STL`,threemfDetected:`File 3MF rilevati`,threemfExtractionInfo:`Modello stampante, materiale, colore e impostazioni stampa saranno estratti automaticamente dai file 3MF.`,willBeExtracted:`Sara estratto`,filesExtracted:`{{count}} file estratti`,uploadComplete:`Caricamento completato: {{succeeded}} riusciti`,uploadFailed:`Caricamento fallito`,zipFilesFailed:`{{count}} file falliti`,uploading:`Caricamento...`,changeLink:`Cambia collegamento...`,linkTo:`Collega a...`,linkToProjectOrArchive:`Collega a progetto o archivio`,generateThumbnail:`Genera miniatura`,generateThumbnails:`Genera miniature`,generateThumbnailsForMissing:`Genera miniature per STL senza miniatura`,gridView:`Vista griglia`,listView:`Vista elenco`,lowDiskSpaceWarning:`Avviso spazio disco basso`,lowDiskSpaceDetails:`Solo {{free}} liberi su {{total}} totali. La soglia e {{threshold}} GB nelle impostazioni.`,files:`File`,folders:`Cartelle`,size:`Dimensione`,free:`Libero`,allFiles:`Tutti i file`,allExternal:`Esterni`,externalIsEmpty:`Nessun file esterno`,externalEmptyDescription:`I file delle tue cartelle esterne collegate appariranno qui.`,wrap:`A capo`,enableTextWrapping:`Abilita a capo testo`,disableTextWrapping:`Disabilita a capo testo`,collapse:`Comprimi`,collapseFoldersByDefault:`Comprimi le cartelle per impostazione predefinita`,expandFoldersByDefault:`Espandi le cartelle per impostazione predefinita`,folderSort:`Ordina cartelle`,folderSortByName:`Per nome`,folderSortByActivity:`Per attività recente`,dragToResizeTooltip:`Trascina per ridimensionare, doppio clic per reset`,searchFiles:`Cerca file...`,searchSubfoldersHint:`Sottocartelle incluse`,readme:{truncated:`Troncato`,show:`Mostra README`,hide:`Nascondi README`,label:`README`},tags:{title:`Etichette`,subtitle:`Etichetta i file per filtri trasversali — giocattoli, sicuri per bambini, solo PETG, qualunque cosa serva.`,manage:`Etichette`,manageTitle:`Gestisci il catalogo delle etichette`,add:`Nuova etichetta`,edit:`Rinomina etichetta`,name:`Nome`,fileCount:`File`,empty:`Nessuna etichetta. Creane una per iniziare.`,noMatches:`Nessuna etichetta corrispondente.`,createPlaceholder:`es. giocattoli, sicuro-bimbi, petg`,createButton:`Crea`,nameRequired:`Il nome è obbligatorio.`,searchPlaceholder:`Filtra etichette...`,created:`Etichetta creata.`,updated:`Etichetta rinominata.`,deleted:`Etichetta rimossa.`,saveFailed:`Impossibile salvare l'etichetta.`,deleteFailed:`Impossibile rimuovere l'etichetta.`,applyFailed:`Impossibile applicare le etichette.`,applyAdd:`Aggiungi etichette`,applyRemove:`Rimuovi etichette`,applyAddSuccess:`Aggiunte {{count}} etichetta/e su {{files}} file.`,applyRemoveSuccess:`Rimosse {{count}} etichetta/e da {{files}} file.`,actionAdd:`Aggiungi ai file selezionati`,actionRemove:`Rimuovi dai file selezionati`,tagAction:`Etichetta`,bulkTitle:`Etichetta {{count}} file selezionato/i`,bulkTooltip:`Aggiungi o rimuovi etichette su ogni file selezionato.`,noPermission:`Non hai il permesso per etichettare i file.`,filterLabel:`Filtraggio per:`,clearAll:`Pulisci tutto`,confirmDelete:`Eliminare l'etichetta "{{name}}"?`,confirmDeleteMessage:`Rimuove l'etichetta dal catalogo. I file mantengono le altre etichette.`,confirmDeleteInUseMessage:`Questa etichetta è su {{count}} file. L'eliminazione la rimuove da tutti; i file non vengono toccati.`,editAria:`Modifica {{name}}`,deleteAria:`Elimina {{name}}`},allTypes:`Tutti i tipi`,prints:`Stampe`,ascending:`Crescente`,descending:`Decrescente`,showModified:`Mostra date di modifica`,hideModified:`Nascondi date di modifica`,lastModified:`Ultima modifica`,lastActivity:`Ultima attività`,resultsCount:`{{showing}} di {{total}} file`,selectAll:`Seleziona tutto`,deselectAll:`Deseleziona tutto`,selected:`{{count}} selezionati`,adding:`Aggiunta...`,loadingFiles:`Caricamento file...`,folderIsEmpty:`La cartella e vuota`,noFilesYet:`Nessun file ancora`,folderEmptyDescription:`Carica file o sposta file in questa cartella per iniziare.`,noFilesDescription:`Carica file per iniziare a organizzare i file di stampa.`,noMatchingFiles:`Nessun file corrispondente`,noMatchingFilesDescription:`Nessun file corrisponde ai criteri di ricerca o filtro.`,clearFilters:`Pulisci filtri`,printedCount:`Stampato {{count}}x`,uploadedBy:`Caricato da`,deleteFolder:`Elimina cartella`,deleteFile:`Elimina file`,deleteFilesCount:`Elimina {{count}} file`,deleteFolderConfirm:`Sei sicuro di voler eliminare questa cartella? Tutti i file dentro saranno eliminati.`,deleteFileConfirm:`Sei sicuro di voler eliminare questo file?`,deleteFilesConfirm:`Sei sicuro di voler eliminare {{count}} file selezionati? Questa azione non può essere annullata.`,deleting:`Eliminazione...`,noPermissionRenameFolder:`Non hai il permesso di rinominare cartelle`,noPermissionLinkFolder:`Non hai il permesso di collegare cartelle`,noPermissionDeleteFolder:`Non hai il permesso di eliminare cartelle`,onlyEmptyFoldersDeletable:`Puoi eliminare solo cartelle vuote`,noPermissionPrint:`Non hai il permesso di stampare`,noPermissionSlice:`Non hai il permesso di sezionare i file`,noPermissionAddToQueue:`Non hai il permesso di aggiungere alla coda`,noPermissionDownload:`Non hai il permesso di scaricare file`,noPermissionPreview:`Non hai il permesso di visualizzare l'anteprima dei file`,preview3d:`Anteprima 3D`,noPermissionRenameFile:`Non hai il permesso di rinominare questo file`,noPermissionGenerateThumbnail:`Non hai il permesso di generare miniature`,noPermissionDeleteFile:`Non hai il permesso di eliminare questo file`,noPermissionCreateFolder:`Non hai il permesso di creare cartelle`,noPermissionUpload:`Non hai il permesso di caricare file`,noPermissionMoveFiles:`Non hai il permesso di spostare file`,noPermissionDeleteFiles:`Non hai il permesso di eliminare file`,linkExternal:`Collega esterno`,linkExternalFolder:`Collega cartella esterna`,linkExternalFolderDescription:`Monta una directory host (NAS, USB, condivisione di rete) nel File Manager. I file non vengono copiati — vengono letti direttamente dal percorso originale.`,externalFolderNamePlaceholder:`es. Stampe NAS`,externalPath:`Percorso host`,externalPathHelp:`Percorso assoluto della directory sull'host Docker. Deve essere montato come bind nel container.`,readOnly:`Sola lettura`,readOnlyHelp:`impedisce caricamenti e cancellazioni`,showHiddenFiles:`Mostra file nascosti (file punto)`,externalFolder:`Cartella esterna`,scanFolder:`Scansiona`,toast:{folderCreated:`Cartella creata`,openInSlicerFailed:`Impossibile aprire nello slicer`,folderDeleted:`Cartella eliminata`,fileDeleted:`File eliminato`,filesDeleted:`Eliminati {{count}} file`,filesMoved:`File spostati`,folderLinked:`Cartella collegata`,folderUnlinked:`Cartella scollegata`,externalFolderLinked:`Cartella esterna collegata e scansionata`,folderScanned:`Scansione completata: {{added}} aggiunti, {{removed}} rimossi`,addedToQueue:`Aggiunti {{count}} file alla coda`,addedToQueuePartial:`Aggiunti {{added}} file, {{failed}} falliti`,failedToAddToQueue:`Aggiunta file fallita: {{error}}`,fileRenamed:`File rinominato`,folderRenamed:`Cartella rinominata`,thumbnailsGenerated:`Generate {{count}} miniature`,thumbnailsGeneratedPartial:`Generate {{succeeded}} miniature, {{failed}} fallite`,noStlMissingThumbnails:`Nessun file STL senza miniature`,failedToGenerateThumbnails:`Generazione miniature fallita: {{error}}`,thumbnailGenerated:`Miniatura generata`,failedToGenerateThumbnail:`Generazione miniatura fallita: {{error}}`}},projects:{parentLabel:`Progetto principale`,parentNone:`Nessuno (progetto di primo livello)`,parentHint:`Annida questo progetto in un altro perché i suoi numeri confluiscano in un progetto principale`,partOf:`Parte di {{name}}`,subProjectCount:`{{count}} sotto-progetti`,subProjectsOf:`Sotto-progetti di {{name}}`,collapseSubProjects:`Comprimi sotto-progetti`,expandSubProjects:`Espandi sotto-progetti`,title:`Progetti`,subtitle:`Organizza e traccia i tuoi progetti di stampa 3D`,newProject:`Nuovo progetto`,editProject:`Modifica progetto`,deleteProject:`Elimina progetto`,projectName:`Nome progetto`,description:`Descrizione`,noProjects:`Nessun progetto ancora`,noProjectsFiltered:`Nessun progetto {{status}}`,noProjectsFilteredHelp:`Non hai progetti {{status}}. I progetti appariranno qui quando il loro stato cambia.`,createFirst:`Crea il tuo primo progetto per organizzare stampe correlate, tracciare progressi e gestire i tuoi build.`,createFirstButton:`Crea il tuo primo progetto`,create:`Crea`,files:`File`,prints:`Stampe`,plates:`piatti`,parts:`parti`,lastModified:`Ultima modifica`,deleteConfirm:`Sei sicuro di voler eliminare questo progetto? Archivi e elementi in coda saranno scollegati ma non eliminati.`,addFiles:`Aggiungi file`,removeFile:`Rimuovi file`,viewDetails:`Vedi dettagli`,namePlaceholder:`es., Build Voron 2.4`,descriptionPlaceholder:`Descrizione opzionale...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`L'URL deve iniziare con http:// o https://`,openExternalUrl:`Apri URL del progetto`,coverImageLabel:`Immagine di copertina`,coverImageAlt:`Immagine di copertina del progetto`,coverImageUpload:`Carica`,coverImageReplace:`Sostituisci`,coverImageRemove:`Rimuovi`,color:`Colore`,targetPlates:`Piatti target`,targetPlatesPlaceholder:`es., 25`,targetPlatesHelp:`Numero di job di stampa`,targetParts:`Parti target`,targetPartsPlaceholder:`es., 150`,targetPartsHelp:`Totale oggetti necessari`,targetSets:`Copie per file`,targetSetsPlaceholder:`es. 10`,targetSetsHelp:`Quante volte stampare ogni file stampabile`,tagsLabel:`Tag (separati da virgola)`,tagsPlaceholder:`es., voron, funzionale, regalo`,dueDate:`Data scadenza`,priority:`Priorita`,priorityLow:`Bassa`,priorityNormal:`Normale`,priorityHigh:`Alta`,priorityUrgent:`Urgente`,statusActive:`Attivo`,statusCompleted:`Completato`,statusArchived:`Archiviato`,done:`Fatto`,completed:`completato`,failed:`fallito`,inQueue:`in coda`,noPrintsYet:`Nessuna stampa ancora`,printJobs:`Job di stampa (piatti)`,partsPrinted:`Parti stampate`,failedParts:`Parti fallite`,import:`Importa`,export:`Esporta`,importProject:`Importa progetto`,exportAll:`Esporta tutti i progetti`,loading:`Caricamento progetti...`,noEditPermission:`Non hai il permesso di modificare progetti`,noDeletePermission:`Non hai il permesso di eliminare progetti`,noCreatePermission:`Non hai il permesso di creare progetti`,noImportPermission:`Non hai il permesso di importare progetti`,noExportPermission:`Non hai il permesso di esportare progetti`,toast:{created:`Progetto creato`,updated:`Progetto aggiornato`,deleted:`Progetto eliminato`,imported:`Progetto importato`,multipleImported:`{{count}} progetti importati`,importFailed:`Import fallito`,exported:`Progetti esportati (solo metadati)`}},projectDetail:{notFound:`Progetto non trovato`,backToProjects:`Torna a Progetti`,export:`Esporta`,exportProject:`Esporta progetto`,noExportPermission:`Non hai il permesso di esportare progetti`,noEditPermission:`Non hai il permesso di modificare progetti`,partOf:`Parte di:`,priorityLabel:`Priorita:`,noPrints:`Nessuna stampa in questo progetto ancora`,status:{active:`Attivo`,completed:`Completato`,archived:`Archiviato`},priority:{low:`Bassa`,normal:`Normale`,high:`Alta`,urgent:`Urgente`},dueDate:{overdue:`Scaduto`,today:`Scade oggi`,daysLeft:`{{count}} giorni rimanenti`},progress:{platesProgress:`Avanzamento piatti`,partsProgress:`Avanzamento parti`,setsProgress:`Set completi`,sets:`set`,setsHint:`Un set è completo quando ogni file stampabile raggiunge questo numero`,printJobs:`job di stampa`,parts:`parti`,percentComplete:`{{percent}}% completato`,remaining:`{{count}} rimanenti`},stats:{printJobs:`Job di stampa`,total:`totale`,failed:`{{count}} falliti`,partsPrinted:`{{count}} parti stampate`,printTime:`Tempo di stampa`,filamentUsed:`Filamento usato`},cost:{title:`Tracciamento costi`,filamentCost:`Costo filamento`,energy:`Energia`,totalCost:`Costo totale`,total:`Totale`,includesBom:`incl. distinta materiali`,budget:`Budget`,remaining:`Rimanente`},subProjects:{title:`Sotto-progetti ({{count}})`,jobs:`{{count}} lavori`},rollup:{title:`Inclusi {{count}} sotto-progetti`,progress:`Avanzamento complessivo`,percentComplete:`{{percent}}% completato`},notes:{title:`Note`,noEditPermission:`Non hai il permesso di modificare le note`,placeholder:`Aggiungi note su questo progetto...`,empty:`Nessuna nota ancora. Clicca Modifica per aggiungere note.`},files:{title:`File`,linkFolders:`Collega cartelle dal Gestore file`,forQuickAccess:`a questo progetto per accesso rapido.`,fileCount:`{{count}} file`,empty:`Nessuna cartella collegata. Vai a Gestore file e collega una cartella a questo progetto.`,printedCount:`Stampato {{count}} volte`,progressTooltip:`{{done}} di {{target}} stampe completate`,noFiles:`Nessun file in questa cartella.`},bom:{title:`Distinta materiali`,acquired:`{{completed}}/{{total}} acquisiti`,showAll:`Mostra tutti`,hideDone:`Nascondi completati`,addPart:`Aggiungi parte`,noAddPermission:`Non hai il permesso di aggiungere parti`,partNamePlaceholder:`Nome parte (es., viti M3x8)`,partName:`Nome parte`,qty:`Qta`,price:`Prezzo ({{currency}})`,sourcingUrlPlaceholder:`URL fornitura (opzionale)`,remarksPlaceholder:`Note (opzionale)`,deletePart:`Elimina parte`,deleteConfirm:`Sei sicuro di voler eliminare "{{name}}"?`,noUpdatePermission:`Non hai il permesso di aggiornare parti`,noEditPermission:`Non hai il permesso di modificare parti`,noDeletePermission:`Non hai il permesso di eliminare parti`,totalCost:`Costo totale:`,empty:`Nessuna parte nella distinta materiali. Aggiungi hardware, elettronica o altri componenti da reperire.`},timeline:{title:`Timeline attivita`,empty:`Nessuna attivita ancora.`},template:{saveAsTemplate:`Salva come template`,noCreatePermission:`Non hai il permesso di creare template`},queue:{title:`Coda`,viewAll:`Vedi tutto`,printing:`{{count}} in stampa`,queued:`{{count}} in coda`},prints:{title:`Stampe ({{count}})`},toast:{projectUpdated:`Progetto aggiornato`,partAdded:`Parte aggiunta`,partRemoved:`Parte rimossa`,exportFailed:`Export fallito`,projectExported:`Progetto esportato`,templateCreated:`Template creato`}},system:{title:`Informazioni sistema`,version:`Versione`,uptime:`Tempo attivo`,cpuUsage:`Uso CPU`,memoryUsage:`Uso memoria`,diskUsage:`Uso disco`,networkInfo:`Info rete`,logs:`Log`,debugMode:`Modalita debug`,enableDebug:`Abilita log debug`,disableDebug:`Disabilita log debug`,downloadLogs:`Scarica log`,clearLogs:`Cancella log`,dockerInfo:`Info Docker`,containerName:`Nome container`,imageName:`Nome immagine`,platform:`Piattaforma`,architecture:`Architettura`},sponsors:{sectionTitle:`Indipendente e finanziato dalla community`,tagline:`Bambuddy è gratuito e resta tale perché qualcuno sceglie di sostenerlo. Niente VC, niente lock-in cloud.`,viewSupporters:`Vedi i sostenitori`,toastPrints:`Hai completato {{count}} stampe con Bambuddy. Bambuddy resta gratuito grazie a chi lo sostiene.`,toastCost:`Hai monitorato {{total}} di filamento con Bambuddy. Scopri chi mantiene il progetto indipendente.`,toastArchives:`{{count}} stampe archiviate con Bambuddy. Scopri chi lo mantiene indipendente.`,toastAnniversary:`Un anno con Bambuddy! Scopri chi mantiene il progetto indipendente.`,toastVersionUpdate:`Aggiornato a v{{version}}. Bambuddy resta gratuito grazie a chi lo sostiene.`,toastBusiness:`Usi Bambuddy su {{count}} stampanti? Esiste un piano di supporto per i team: correzioni prioritarie, fatturazione e un contatto diretto con il manutentore.`,businessCta:`Bambuddy per le aziende`,businessTitle:`Bambuddy per le aziende`,businessTagline:`Stai gestendo {{count}} stampanti. Supporto prioritario, licenze commerciali e fatturazione sono disponibili per team e farm di stampa.`},library:{title:`Libreria filamenti`,addFilament:`Aggiungi filamento`,editFilament:`Modifica filamento`,deleteFilament:`Elimina filamento`,vendor:`Produttore`,material:`Materiale`,color:`Colore`,kFactor:`Fattore K`,temperature:`Temperatura`,noFilaments:`Nessun filamento in libreria`,deleteConfirm:`Sei sicuro di voler eliminare questo filamento?`,importFromPrinter:`Importa da stampante`,exportToFile:`Esporta su file`,runWithPipeline:{actionLabel:`Esegui con pipeline`,noPermission:`Non hai il permesso di eseguire pipeline`,modalTitle:`Esegui con pipeline`,confirmTitle:`Conferma esecuzione`,confirmIntro:`Il pre-volo ha trovato problemi con questa esecuzione`,sourceHint:`Sorgente`,pipelineHint:`Pipeline`,targetHint:`Destinazione`,pipelineListAria:`Pipeline disponibili`,runAnyway:`Esegui comunque`,loading:`Caricamento…`,empty:`Nessuna pipeline salvata. Apri il dialogo Slice e fai clic su "Salva come pipeline" per crearne una.`,noTarget:`Nessuna stampante di destinazione`,noTargetMessage:`Questa pipeline non ha una stampante di destinazione. Aprila nelle Impostazioni per sceglierne una.`,copies:`Copie`,copiesHint:`max {{n}}`,classTarget:`Qualsiasi {{model}}`,toast:{started:`Esecuzione della pipeline avviata`,failed:`Impossibile avviare l'esecuzione`},issue:{printerNotSet:`Nessuna stampante di destinazione su questa pipeline.`,printerNotFound:`La stampante di destinazione non esiste più.`,printerDisabled:`La stampante di destinazione è disabilitata.`,printerOffline:`La stampante di destinazione è offline.`,filamentType:`Slot filamento {{slot}}: atteso {{expected}}, AMS ha {{actual}}`,filamentColor:`Slot filamento {{slot}}: colore differente (atteso {{expected}}, AMS ha {{actual}})`,amsSlotMissing:`Slot AMS {{slot}} non disponibile su questa stampante`,filamentUnverified:`Lo slot filamento {{slot}} proviene da un preset cloud / standard e non può essere verificato staticamente.`,noClassMatches:`Nessuna stampante in questa installazione corrisponde alla classe di modello target della pipeline ({{expected}}).`,classNotSet:`La destinazione della pipeline è una classe di stampante ma nessun modello è stato scelto.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Sono mostrati i valori predefiniti dello slicer: il tuo sidecar è più vecchio di questa funzione e non può fornire i valori di un profilo. Aggiorna l'immagine del sidecar per vederli. Tutto ciò che non modifichi continua a usare il profilo.`,presetValuesNotConfigured:`Sono mostrati i valori predefiniti dello slicer: nessun sidecar è configurato, quindi i valori di un profilo non sono leggibili. Tutto ciò che non modifichi continua a usare il profilo.`,presetValuesSidecarUnavailable:`Sono mostrati i valori predefiniti dello slicer: il sidecar non ha risposto, quindi i valori di un profilo non sono leggibili. Tutto ciò che non modifichi continua a usare il profilo.`,presetValuesUnavailable:`Sono mostrati i valori predefiniti dello slicer: quelli del profilo scelto non sono leggibili. Tutto ciò che non modifichi continua a usare il profilo.`,filamentDefault:`Predefinito`,fromFile:`dal file`,fromFileHint:`Il designer ha modificato questo parametro nel file di origine. Il valore è {{value}}.`,fromFilePrinterCoupled:`stampante del designer`,fromFilePrinterCoupledHint:`Tarato per la stampante per cui è stato progettato questo file: sulla tua può essere errato o fuori intervallo.`,fromFileOverridesPreset:`sovrascrive il profilo`,fromFileOverridesPresetHint:`Il file imposta {{value}} mentre il profilo scelto usa {{preset}}. Selezionalo solo se deve prevalere il file.`,useFromFile:`Usa il valore del file di origine per {{option}}`,otherFromFile:`Altre impostazioni da questo file`,fromFileSummary:`Il progettista ha modificato {{count}} impostazioni di processo in questo file. Vengono usate solo quelle che spunti.`,fromFileUseAll:`Usa le impostazioni del progettista`,fromFileUseAllHint:`Spunta le impostazioni che si trasferiscono ad altre stampanti. Quelle tarate sulla stampante del progettista, e quelle che definiscono il preset scelto, restano disattivate.`,fromFileClear:`Azzera {{count}}`,loading:`Caricamento impostazioni dello slicer…`,mode:{simple:`Semplice`,advanced:`Avanzato`,expert:`Esperto`},searchPlaceholder:`Cerca impostazioni`,resetAll:`Ripristina {{count}}`,resetOption:`Ripristina il valore predefinito`,noMatches:`Nessuna impostazione corrisponde a questa ricerca.`},slice:{filamentSlotUnset:`non impostato`,processSettingsEmbedded:`Non utilizzato finché «Usa le impostazioni integrate del file» è attivo: sono le impostazioni del file a guidare questo slice.`,processSettingsInactive:`Non attivo`,presetsHidden:`{{count}} nascosti`,showAllPresets:`Mostra tutti`,showFewerPresets:`Mostra meno`,processSettings:`Impostazioni di processo`,processSettingsHint:`Regola il profilo scelto per questo slice. Tutto ciò che non tocchi resta come definito dal profilo.`,processSettingsChanged:`{{count}} modificate`,processSettingsUnchanged:`Valori del profilo`,title:`Slicing modello`,action:`Slice`,actionAll:`Slicia tutti i {{count}} piatti`,actionAllTitle:`Slicia tutti i piatti in un unico output multi-piatto (un solo archivio). La selezione del filamento copre ogni slot definito dal progetto.`,allPlatesToggle:`Slicia tutti i {{count}} piatti`,slicing:`Slicing…`,printer:`Profilo stampante`,process:`Profilo processo`,filament:`Profilo filamento`,filamentSlot:`Filamento {{index}} ({{type}})`,filamentColour:`Colore del filamento`,selectPreset:`— Seleziona un preset —`,loadingPresets:`Caricamento preset…`,analyzingPlateFilaments:`Analisi filamenti del piano…`,analyzingPlateFilamentsHint:`Slicing di anteprima per scoprire quali slot AMS usa questo piano. In cache dopo — la riapertura è istantanea.`,previewToast:`Analisi di {{name}} – {{elapsed}}`,previewWithProgress:`Analisi di {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,notUsedByPlate:`— non usato da questo piano`,noPresetsForSlot:`Nessun preset disponibile`,otherPrinters:`Altre stampanti`,presetsLoadFailed:`Caricamento preset fallito. Apri Impostazioni → Profili per importarli prima.`,refreshPresets:`Aggiorna`,refreshPresetsTitle:`Aggiorna i preset — recupera gli elenchi più recenti dal cloud e dai bundle (da usare dopo aver eliminato un preset in Bambu Studio o Bambu Handy)`,allPresetsRequired:`Tutti i preset devono essere selezionati`,useEmbedded:`Usa le impostazioni integrate del file`,useEmbeddedHint:`Slicia come impostato dal designer (pareti, riempimento, filamento) invece dei profili sopra. Disponibile perché la tua stampante corrisponde a quella del file.`,autoOrient:`Orienta automaticamente gli oggetti`,autoOrientHint:`Lo slicer ruota ogni oggetto sul lato che si stampa meglio prima di affettare. Sostituisce l'orientamento salvato nel file.`,autoArrange:`Disponi automaticamente sul piatto`,autoArrangeHint:`Lo slicer dispone gli oggetti in modo che non si sovrappongano più. Sostituisce la disposizione del file.`,enqueuing:`Invio lavoro di slicing…`,queued:`In coda…`,failed:`Slicing fallito. Controlla i log del sidecar.`,startedToast:`Slicing di {{name}} in background…`,queuedToast:`In coda: {{name}} – {{elapsed}}`,runningToast:`Slicing {{name}} – {{elapsed}}`,runningWithProgress:`{{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,runningWithProgressMultiPlate:`Piatto {{plateIndex}} di {{plateCount}} • {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,completedToast:`{{name}} sezionato`,externalWriteFallbackToast:`Salvato nella libreria interna: impossibile scrivere nella cartella esterna`,failedTitle:`Slicing fallito`,failedToast:`Slicing di {{name}} fallito: {{detail}}`,tier:{local:`Importato`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Standard`},cloud:{notAuthenticated:`Accedi a Bambu Cloud (Impostazioni → Profili → Bambu Cloud) per vedere i preset cloud.`,expired:`Sessione Bambu Cloud scaduta – accedi di nuovo per aggiornare i preset cloud.`,unreachable:`Bambu Cloud non è raggiungibile. I preset locali e standard funzionano ancora.`},orcaCloud:{notAuthenticated:`Accedi a Orca Cloud (Profili → Orca Cloud) per vedere i tuoi preset Orca.`,expired:`Sessione Orca Cloud scaduta — accedi di nuovo per aggiornare i tuoi preset Orca.`,unreachable:`Orca Cloud non è raggiungibile in questo momento. Gli altri preset continuano a funzionare.`},bedType:{label:`Piano di stampa`,auto:`Auto (usa preset di processo)`,coolPlate:`Cool Plate`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`},pipelines:{label:`Pipeline`,applyAria:`Applica pipeline`,applyPrompt:`Applica pipeline…`,empty:`Nessuna pipeline salvata`,saveButton:`Salva come pipeline`,saveTitle:`Salva la selezione corrente di tutti e quattro gli slot come pipeline riutilizzabile`,namePlaceholder:`Nome pipeline`,nameAria:`Nome nuova pipeline`,toast:{applied:`"{{name}}" applicata`,saved:`Pipeline salvata`,saveFailed:`Salvataggio non riuscito`}}},spoolman:{title:`Integrazione Spoolman`,enabled:`Spoolman abilitato`,url:`URL Spoolman`,connected:`Connesso`,disconnected:`Non connesso`,testConnection:`Testa connessione`,sync:`Sincronizza`,syncing:`Sincronizzazione...`,lastSync:`Ultima sincronizzazione`,linkToSpoolman:`Collega a Spoolman`,openInSpoolman:`Apri in Spoolman`,unlinkSpool:`Scollega bobina`,unlinkConfirmTitle:`Rimuovere bobina?`,unlinkConfirmMessage:`Questo rimuoverà la bobina da questo slot. I dati della bobina stessa rimarranno invariati.`,selectSpool:`Seleziona bobina`,noUnlinkedSpools:`Nessuna bobina disponibile`,linkSuccess:`Bobina assegnata con successo`,linkFailed:`Impossibile assegnare la bobina`,unlinkSuccess:`Bobina rimossa con successo`,unlinkFailed:`Impossibile rimuovere la bobina`,linkedSpool:`Bobina assegnata`,spoolId:`ID bobina`,fillSourceLabel:`(Spoolman)`,weight:`Peso`,remaining:`Rimanente`,disableWeightSync:`Disabilita sync peso stimato AMS`,disableWeightSyncDesc:`Non aggiornare la capacità rimanente dalle stime AMS. Usalo se preferisci il tracciamento di Spoolman rispetto alle stime AMS. Le nuove bobine useranno comunque la stima AMS come peso iniziale.`,reportPartialUsage:`Segnala uso parziale per stampe fallite`,reportPartialUsageDesc:`Quando una stampa fallisce o viene annullata, segnala il filamento stimato usato fino a quel punto in base all'avanzamento layer.`},locations:{title:`Ubicazioni di stoccaggio`,subtitle:`Gestisci scaffali, cassetti e altri posti fisici per le bobine`,add:`Aggiungi ubicazione`,addShort:`Aggiungi`,edit:`Modifica ubicazione`,name:`Nome`,spools:`Bobine`,sensors:`Sensori`,empty:`Nessuna ubicazione di stoccaggio. Crea il tuo primo scaffale o cassetto.`,manage:`Ubicazioni`,createPlaceholder:`es. Scaffale A, Cassetto 1`,nameRequired:`Il nome dell'ubicazione è obbligatorio`,created:`Ubicazione creata`,updated:`Ubicazione aggiornata`,deleted:`Ubicazione eliminata`,saveFailed:`Impossibile salvare l'ubicazione`,deleteFailed:`Impossibile eliminare l'ubicazione`,deleteBlocked:`Rimuovi prima tutte le bobine da questa ubicazione`,confirmDelete:`Eliminare «{{name}}»?`,confirmDeleteMessage:`Questa ubicazione verrà rimossa dal catalogo. Sposta prima le bobine.`,confirmDeleteMessageWithSensors:`Questa ubicazione verrà rimossa dal catalogo. Sposta prima le bobine. Verranno eliminati anche i sensori collegati.`},inventory:{title:`Inventario Bobine`,subtitle:`Gestisci le tue bobine`,addToInventory:`Aggiungi all'inventario`,addToInventoryPending:`Aggiunta in corso...`,addToInventorySuccess:`Bobina aggiunta all'inventario`,addToInventoryFailed:`Aggiunta della bobina all'inventario non riuscita`,unknownSpoolTitle:`Nuovo filamento rilevato`,unknownSpoolMessage:`È stata rilevata una bobina con tag RFID sconosciuto in {{location}}. Aggiungerla all'inventario ora?`,unknownSpoolSlot:`Slot`,bulk:{selectAllVisible:`Seleziona tutto il visibile`,selectRow:`Seleziona riga`,selectGroup:`Seleziona gruppo`,selectionCount:`{{count}} selezionate`,edit:`Modifica`,printLabels:`Stampa etichette`,resetUsage:`Reimposta utilizzo`,restore:`Ripristina`,archive:`Archivia`,delete:`Elimina`,clearSelection:`Cancella selezione`,editTitle:`Modifica bobine in blocco`,editSubtitle:`Si applica a {{count}} bobine selezionate. Vengono aggiornati solo i campi spuntati.`,editHint:`Digita in un campo per contrassegnarlo per l'aggiornamento — vengono inviate solo le righe spuntate. Un campo vuoto lascia le bobine invariate (svuotare un campo si fa per singola bobina).`,useCustom:`Usa "{{value}}"`,toggleField:`Attiva l'aggiornamento per questo campo`,changeCount:`{{count}} campi verranno aggiornati.`,applyPending:`Applicazione in corso...`,applyButton:`Applica a {{count}} bobine`,deleteTitle:`Elimina bobine selezionate`,archiveTitle:`Archivia bobine selezionate`,restoreTitle:`Ripristina bobine selezionate`,resetUsageTitle:`Reimposta utilizzo delle bobine selezionate`,deleteMessage:`Eliminare definitivamente {{count}} bobine? L'operazione non può essere annullata.`,archiveMessage:`Archiviare {{count}} bobine? Possono essere ripristinate in seguito.`,restoreMessage:`Ripristinare {{count}} bobine archiviate?`,resetUsageMessage:`Reimpostare il contatore "Totale consumato" su {{count}} bobine? Il peso rimanente viene preservato.`,updateSuccess:`{{count}} bobine aggiornate`,updateFailed:`Aggiornamento in blocco fallito`,updatePartial:`{{ok}} bobine aggiornate, {{failed}} fallite`,updateAllFailed:`Tutti i {{count}} aggiornamenti sono falliti — la selezione viene mantenuta per riprovare`,deleteSuccess:`{{count}} bobine eliminate`,deleteFailed:`Eliminazione in blocco fallita`,deletePartial:`{{ok}} bobine eliminate, {{failed}} fallite`,deleteAllFailed:`Tutte le {{count}} eliminazioni sono fallite — la selezione viene mantenuta per riprovare`,archiveSuccess:`{{count}} bobine archiviate`,archiveFailed:`Archiviazione in blocco fallita`,archivePartial:`{{ok}} bobine archiviate, {{failed}} fallite`,archiveAllFailed:`Tutte le {{count}} archiviazioni sono fallite — la selezione viene mantenuta per riprovare`,restoreSuccess:`{{count}} bobine ripristinate`,restoreFailed:`Ripristino in blocco fallito`,restorePartial:`{{ok}} bobine ripristinate, {{failed}} fallite`,restoreAllFailed:`Tutti i {{count}} ripristini sono falliti — la selezione viene mantenuta per riprovare`,invalidHex:`Inserisci 6 caratteri esadecimali (RRGGBB) o 8 (RRGGBBAA). Altrimenti il campo non verrà applicato.`},spoolmanMixedContentTitle:`Spoolman non può essere caricato tramite HTTPS — contenuto misto bloccato dal browser`,spoolmanMixedContentBody:`Bambuddy viene servito tramite HTTPS (dietro il tuo reverse proxy), ma l'URL di Spoolman è ancora HTTP. I browser bloccano il contenuto misto per motivi di sicurezza, quindi l'interfaccia Spoolman incorporata non può essere visualizzata. Anche Spoolman deve essere raggiungibile via HTTPS.`,spoolmanMixedContentFixReverseProxy:`Metti Spoolman dietro lo stesso reverse proxy di Bambuddy (Traefik / Nginx / Caddy) in HTTPS, poi aggiorna l'URL di Spoolman nelle Impostazioni con il nuovo indirizzo HTTPS.`,spoolmanMixedContentFixOpenNewTab:`Come alternativa, apri Spoolman in una nuova scheda via HTTP — le regole sul contenuto misto si applicano solo ai frame incorporati, una scheda autonoma funziona.`,spoolmanOpenInNewTab:`Apri Spoolman in una nuova scheda`,labels:{title:`Stampa etichette bobine`,selectedCount:`{{count}} selezionato`,pickSpools:`Scegli per quali bobine stampare le etichette:`,monochrome:`Monocromatico (stampante in bianco e nero)`,monochromeHint:`Rimuove il campione di colore e allarga il testo`,startingPosition:`Posizione iniziale dell’etichetta`,startingPositionRange:`Solo modelli a foglio: L7160 supporta 1–21; 5160 supporta 1–30.`,startingPositionInvalid:`Inserisci un numero intero da 1 a {{capacity}}.`,startingPositionFirst:`La stampa inizia dalla posizione 1.`,startingPositionSkipped:`Le posizioni da 1 a {{lastPosition}} resteranno vuote sul primo foglio.`,startingPositionRangeError:`La posizione iniziale deve essere compresa tra 1 e {{capacity}} per questo foglio.`,searchPlaceholder:`Cerca per nome, marca o #ID`,filterByMaterial:`Materiale:`,allMaterials:`Tutto`,selectVisible:`Seleziona tutti visibili ({{count}})`,deselectVisible:`Deseleziona visibili`,clearAll:`Cancella tutto`,noSpoolsToShow:`Nessuna bobina da mostrare. Modifica il filtro e riprova.`,noMatches:`Nessuna bobina corrisponde alla ricerca o al filtro corrente.`,printOne:`Stampa etichetta per questa bobina`,printLabels:`Stampa etichette…`,bulkTitle:`Scegli le bobine da etichettare tra le {{count}} mostrate`,noSpoolsTitle:`Nessuna bobina da etichettare`,error:`Impossibile generare etichette: {{msg}}`,sortBy:{label:`Ordina:`,id:`Per ID`,color:`Per colore`},templates:{amsHolderSmall:{label:`Supporto AMS — piccolo (74 × 33 mm)`,hint:`Un'etichetta per pagina; corrisponde all'etichetta stampabile del modello MakerWorld 752566 (Porta-etichette filamento AMS).`},amsHolderLarge:{label:`Supporto AMS — grande (75 × 55 mm)`,hint:`Un'etichetta per pagina; si adatta alla variante cartoncino del porta-etichette filamento AMS. Spazio sufficiente per campione colore, marca, materiale, ID e codice QR.`},box40x30:{label:`Etichetta scatola (40 × 30 mm)`,hint:`Una etichetta per pagina; misura comune DK/Brother, ideale per etichette di sacchetti filamento e contenitori.`},box:{label:`Box label (62 × 29 mm)`,hint:`Una etichetta per pagina; dimensionata per Brother PT/QL e piccole etichette Dymo.`},averyL7160:{label:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,hint:`Foglio formato UE; 21 etichette per pagina A4.`},avery5160:{label:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,hint:`Foglio formato US; 30 etichette per pagina Letter.`}}},csv:{importButton:`Importa CSV`,exportButton:`Esporta CSV`,modalTitle:`Importa bobine da CSV`,selectFile:`Scegli un file CSV o trascinalo qui`,dragHint:`Intestazione: material (obbligatorio), brand, subtype, color_name, rgba, …`,parsing:`Lettura del file…`,previewError:`Impossibile leggere il file CSV`,validCount:`{{count}} valide`,errorCount:`{{count}} con errore`,skippedCount:`{{count}} ignorate`,colRow:`Riga`,colStatus:`Stato`,colColor:`Colore`,colorResolved:`Colore compilato dal catalogo`,colorCrossMaterial:`Colore preso da un materiale diverso — nessuna corrispondenza esatta nel catalogo`,duplicateExisting:`Esiste già una bobina con questo materiale, marca e colore — verrà comunque importata come nuova bobina`,spoolmanHint:`In modalità Spoolman, usa l'importazione/esportazione CSV integrata di Spoolman.`,importValidRows:`Importa {{count}} righe valide`,noValidRows:`Nessuna riga valida`,importing:`Importazione…`,importSuccess:`{{count}} bobine importate`,importError:`Importazione non riuscita`,exportError:`Esportazione non riuscita`},addSpool:`Aggiungi Bobina`,editSpool:`Modifica Bobina`,copySpool:`Copia Bobina`,material:`Materiale`,selectMaterial:`Seleziona materiale...`,subtype:`Sottotipo`,brand:`Marchio`,searchBrand:`Cerca marchio...`,useCustomBrand:`Usa "{{brand}}"`,useCustomMaterial:`Usa materiale personalizzato: {{material}}`,suggestedOptions:`Suggeriti`,allOptions:`Tutti`,colorName:`Nome Colore`,colorNamePlaceholder:`Bianco Giada, Rosso Fuoco...`,color:`Colore`,hexColor:`Colore Hex`,pickColor:`Scegli colore personalizzato`,labelWeight:`Peso da Etichetta`,coreWeight:`Peso Bobina Vuota`,searchSpoolWeight:`Cerca peso bobina...`,weightUsed:`Utilizzato`,currentWeight:`Peso Rimanente`,measuredWeight:`Peso Misurato`,spoolName:`Bobina`,costPerKg:`Costo per kg`,storageLocation:`Posizione di archiviazione`,temperature:`Temperatura`,humidity:`Umidità`,battery:`Batteria`,storageLocationPlaceholder:`es. Scaffale A, Cassetto 1`,openInInventory:`Apri nell'inventario`,measuredWeightError:`Il peso misurato deve essere compreso tra {{min}}g e {{max}}g.`,slicerFilament:`Filamento Slicer`,slicerFilamentName:`Nome Preset Slicer`,slicerPreset:`Preset Slicer`,searchPresets:`Cerca preset filamento...`,selectedPreset:`Selezionato`,noPresetsFound:`Nessun preset trovato`,tempOverrides:`Override Temperatura`,note:`Nota`,notePlaceholder:`Eventuali note aggiuntive su questa bobina...`,category:`Categoria`,categoryPlaceholder:`es. Produzione, Prototipo, Cliente A`,categoryNone:`Senza categoria`,storageLocationNone:`Nessuna posizione impostata`,lowStockThresholdOverride:`Soglia scorte basse (questa bobina)`,lowStockThresholdOverrideHelp:`Lascia vuoto per usare la soglia globale ({{global}}%).`,clearRfid:`Cancella tag RFID`,rfidCleared:`Tag RFID cancellato`,archive:`Archivia`,restore:`Ripristina`,noSpools:`Ancora nessuna bobina. Aggiungi la tua prima bobina per iniziare.`,noAvailableSpools:`Nessuna bobina disponibile. Aggiungi una bobina al tuo inventario o rimuovine l'assegnazione da un altro slot.`,kProfiles:`Profili K`,addKProfile:`Aggiungi K-Profile`,assignSpool:`Assegna Bobina`,unassignSpool:`Scollega`,assignSuccess:`Bobina assegnata e slot AMS configurato`,assignPendingInsert:`Assegnato. Lo slot verrà configurato all'inserimento della bobina.`,assignFailed:`Assegnazione bobina fallita`,selectSpool:`Seleziona una bobina da assegnare a questo slot`,assigned:`Assegnato`,assigning:`Assegnazione...`,searchSpools:`Cerca bobine...`,showAllSpools:`Mostra tutte le bobine`,spoolmanSpools:`Bobine Spoolman`,allMaterials:`Tutti i Materiali`,filterByBrand:`Filtra per marchio...`,showArchived:`Mostra archiviate`,quickAdd:`Aggiunta rapida (Scorta)`,quantity:`Quantità`,stock:`Scorta`,configured:`Configurata`,spoolsCreated:`{{count}} bobine create`,spoolsPartiallyCreated:`{{created}} di {{total}} bobine create (alcune non riuscite)`,spoolCreated:`Bobina creata`,spoolUpdated:`Bobina aggiornata`,spoolDeleted:`Bobina eliminata`,deepLinkSpoolNotFound:`Bobina non trovata`,deepLinkFetchFailed:`Impossibile caricare la bobina — riprova`,spoolArchived:`Bobina archiviata`,spoolRestored:`Bobina ripristinata`,kProfileSaveFailed:`Impossibile salvare le impostazioni del profilo K`,syncWeightSpoolNotFound:`Bobina non trovata — potrebbe essere stata eliminata`,syncWeightSpoolmanUnreachable:`Spoolman non è raggiungibile — riprovare più tardi`,syncWeightFailed:`Sincronizzazione del peso non riuscita`,spoolmanUnreachable:`Spoolman non è raggiungibile — riprovare più tardi`,deleteSpoolNotFound:`Bobina non trovata — potrebbe essere già stata eliminata`,deleteFailed:`Impossibile eliminare la bobina`,archiveSpoolNotFound:`Bobina non trovata — potrebbe essere già stata eliminata`,archiveFailed:`Impossibile archiviare la bobina`,restoreSpoolNotFound:`Bobina non trovata — potrebbe essere già stata eliminata`,restoreFailed:`Impossibile ripristinare la bobina`,saveFailed:`Impossibile salvare le modifiche`,tagClearFailed:`Impossibile cancellare il tag`,deleteConfirm:`Sei sicuro di voler eliminare questa bobina? Questa azione non può essere annullata.`,archiveConfirm:`Sei sicuro di voler archiviare questa bobina?`,advancedSettings:`Impostazioni Avanzate`,filamentInfoTab:`Info filamento`,paProfileTab:`Profilo PA`,colorAndCostTab:`Colore e costo`,printersTab:`Stampanti`,filamentInfo:`Filamento`,additional:`Aggiuntivo`,loadingPresets:`Caricamento preset cloud...`,cloudConnected:`Cloud connesso`,cloudNotConnected:`Cloud non connesso (valori predefiniti)`,recentColors:`Recenti`,searchColors:`Cerca colori...`,searchResults:`Risultati della ricerca`,allColors:`Tutti i colori`,commonColors:`Colori comuni`,showLess:`Mostra meno`,showAll:`Mostra tutto`,noColorsFound:`Nessun colore corrisponde alla ricerca`,noResults:`Nessun risultato trovato`,extraColorsLabel:`Colori extra`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Incolla da 2 a 8 stop hex, separati da virgole. Visualizzato come sfumatura.`,extraColorsInvalid:`Hex non validi ignorati: {{tokens}}`,colorEffectLabel:`Effetto`,colorEffect:{none:`Nessuno`,sparkle:`Scintillante`,wood:`Legno`,marble:`Marmo`,glow:`Bagliore`,matte:`Opaco`,silk:`Silk`,galaxy:`Galassia`,rainbow:`Arcobaleno`,metal:`Metallo`,translucent:`Traslucido`,gradient:`Sfumatura`,dualColor:`Bicolore`,triColor:`Tricolore`,multicolor:`Multicolore`},selectMaterialFirst:`Selezionare prima un materiale nella scheda Info filamento.`,noPrintersConfigured:`Nessuna stampante configurata. Aggiungi stampanti per usare i profili PA.`,matchingFilter:`Corrispondenti`,anyBrand:`Qualsiasi marca`,anyVariant:`Qualsiasi variante`,autoSelect:`Selezione automatica`,matches:`corrispondenze`,match:`corrispondenza`,noMatches:`Nessuna corrispondenza`,connected:`Connessa`,offline:`Offline`,printerOffline:`La stampante è offline. Connetti per visualizzare i profili di calibrazione.`,noKProfilesMatch:`Nessun profilo K corrisponde al filamento selezionato.`,leftNozzle:`Ugello sinistro`,rightNozzle:`Ugello destro`,profilesSelected:`profili di calibrazione selezionati`,filamentPreset:`Preset del filamento`,presetUseSpoolDefault:`Usa il preset della bobina`,presetInherited:`ereditato`,presetOverride:`personalizzato`,presetNeedsModel:`Questa stampante non ha ancora comunicato il proprio modello, quindi non può avere un preset dedicato.`,autoMatchPresets:`Abbina automaticamente`,autoMatchPresetsHint:`Trova la variante del preset della bobina che nomina ciascun modello`,kProfilesPerPrinter:`Profili K`,kProfileNotSet:`Non impostato`,kProfileFlowMismatch:`Questo profilo è stato misurato con un ugello {{profile}} ma è montato un ugello {{fitted}}, quindi non verrà applicato`,nozzle:`Ugello`,unknownModel:`Modello sconosciuto`,onePrinter:`1 stampante`,nPrinters:`{{n}} stampanti`,filamentPresetsLoadFailed:`Impossibile caricare i preset per modello di questa bobina`,filamentPresetSaveFailed:`Impossibile salvare i preset per modello`,totalInventory:`Inventario totale`,totalConsumed:`Totale consumato`,byMaterial:`Per materiale`,inPrinter:`In stampante`,lowStock:`Scorta bassa`,sinceTracking:`Dall'inizio del tracciamento`,resetConsumedCounter:`Azzera contatore`,resetConsumedCounterTooltip:`Azzera il contatore di grammi consumati per questa bobina. Il peso rimanente non viene modificato.`,resetConsumedCounterConfirm:`Azzerare il contatore di grammi consumati di questa bobina? Le stampe future ripartiranno da zero. La bobina, il calcolo del peso rimanente e le impostazioni non vengono modificati.`,resetAllConsumedCounters:`Azzera tutti i contatori`,resetAllConsumedCountersTooltip:`Azzera il contatore di grammi consumati su ogni bobina. I pesi rimanenti non vengono modificati.`,resetAllConsumedCountersConfirm:`Azzerare il contatore di grammi consumati su tutte le {{count}} bobine (incluse quelle archiviate)? La statistica "Totale Consumato" verrà azzerata e le stampe future ripartiranno da zero. Bobine e pesi rimanenti restano invariati.`,consumedCounterReset:`Contatore azzerato`,allConsumedCountersReset:`Contatore azzerato per {{count}} bobina/e`,resetConsumedCounterFailed:`Impossibile azzerare il contatore`,loadedInAms:`Caricato in AMS/Est`,remaining:`Rimanente`,weightCheck:`Controllo Peso`,lastWeighed:`Ultima pesatura`,neverWeighed:`Mai pesato`,search:`Cerca bobine...`,showing:`Visualizzazione`,to:`a`,of:`di`,show:`Mostra`,spools:`bobine`,spool:`bobina`,page:`Pagina`,noSpoolsMatch:`Nessun risultato trovato`,noSpoolsMatchDesc:`Prova a modificare la ricerca o i filtri per trovare quello che cerchi.`,active:`Attive`,archived:`Archiviate`,all:`Tutte`,used:`Usato`,new:`Nuovo`,clearFilters:`Cancella filtri`,table:`Tabella`,cards:`Schede`,net:`Netto`,groupSimilar:`Raggruppa`,groupedSpools:`{{count}} bobine identiche`,groupedRows:`righe`,columns:`Colonne`,configureColumns:`Configura colonne`,configureColumnsDesc:`Trascina per riordinare le colonne o usa le frecce. Attiva/disattiva la visibilità con l'icona dell'occhio.`,visible:`visibili`,reset:`Ripristina`,cancel:`Annulla`,applyChanges:`Applica modifiche`,moveUp:`Sposta su`,moveDown:`Sposta giù`,hideColumn:`Nascondi colonna`,showColumn:`Mostra colonna`,linkToSpool:`Collega a bobina`,tagLinked:`Tag collegato alla bobina`,tagLinkFailed:`Impossibile collegare il tag`,tagAlreadyLinked:`Tag già collegato alla bobina #{{id}}`,unknownTag:`Tag RFID sconosciuto rilevato`,usageHistory:`Cronologia utilizzo`,noUsageHistory:`Nessun utilizzo registrato`,printName:`Nome stampa`,weightConsumed:`Peso consumato`,clearHistory:`Cancella`,historyCleared:`Cronologia utilizzo cancellata`,fillSourceLabel:`(Inv)`,lowStockThresholdError:`La soglia deve essere tra 0.1 e 99.9`,assignMismatchTitle:`Materiale non corrispondente`,assignMismatchMessage:`Il materiale della bobina selezionata "{{spoolMaterial}}" non corrisponde al materiale del vassoio "{{trayMaterial}}" per {{location}}. Assegnare comunque?`,assignMismatchConfirm:`Assegna comunque`,assignPartialMismatchMessage:`Il materiale della bobina "{{spoolMaterial}}" è simile ma non corrisponde esattamente a "{{trayMaterial}}" in {{location}}. Vuoi procedere?`,assignProfileMismatchMessage:`Il profilo della bobina "{{spoolProfile}}" non corrisponde al profilo del vassoio "{{trayProfile}}" in {{location}}. Vuoi procedere?`,assignReconfigureNote:`Lo slot AMS verrà riconfigurato per utilizzare il profilo della bobina.`,spoolmanFilamentCatalog:`Catalogo filamenti Spoolman`,pickFromSpoolmanCatalog:`Scegli dal catalogo Spoolman…`,spoolmanFilamentSelected:`Filamento selezionato dal catalogo Spoolman`,spoolmanFilamentUnlinked:`Collegamento al catalogo filamenti rimosso`,noSpoolmanFilaments:`Nessun filamento trovato nel catalogo Spoolman`,spoolmanFilamentColorSwatch:`Colore del filamento`,spoolWeightManagedBySpoolman:`Il peso della bobina vuota è gestito per tipo di filamento in Spoolman`,spoolmanCatalogLoadFailed:`Impossibile caricare il catalogo Spoolman`},timelapse:{title:`Timelapse`,create:`Crea timelapse`,download:`Scarica`,delete:`Elimina`,preview:`Anteprima`,frameRate:`Frame rate`,quality:`Qualità`,processing:`Elaborazione...`,noTimelapses:`Nessun timelapse disponibile`},ams:{title:`AMS`,slot:`Slot`,empty:`Vuoto`,emptySlot:`Slot vuoto`,slotEmpty:`Vuoto`,slotUnconfigured:`?`,emptySlotReset:`Nessuna bobina assegnata`,unknown:`Sconosciuto`,humidity:`Umidità`,temperature:`Temperatura`,filamentType:`Tipo filamento`,filamentColor:`Colore`,remaining:`Rimanente`,history:`Cronologia AMS`,noHistory:`Nessuna cronologia disponibile`,configureSlot:`Configura slot`,externalSpool:`Bobina esterna`,profile:`Profilo`,kFactor:`Fattore K`,kFactorShort:`K`,fill:`Livello`,configure:`Configura`,used:`utilizzato`,remainingUnit:`rimanente`},printModal:{variants:{editNote:`Queste alternative sono state definite al momento dell'accodamento. Annulla e riaccoda per modificarle.`,title:`Alternative di stampante`,help:`Un lavoro, un posto in coda. La prima stampante compatibile che si libera stampa il suo file.`,unknownModel:`Modello sconosciuto`,plateFor:`Piatto per {{filename}}`,moveUp:`Sposta su`,moveDown:`Sposta giù`,queued:`In coda con {{count}} alternative`},selectPrinter:`Seleziona stampante`,selectPlate:`Seleziona piatto`,filamentMapping:`Mappatura filamento`,useArchiveMapping:`Mappatura`,useArchiveMappingTooltip:`Seleziona ogni slot dalla mappatura AMS salvata con questo archivio (dallo slicer), invece di abbinare per tipo/colore.`,clickToChangeSlot:`Fai clic per modificare l'assegnazione dello slot`,reRead:`Rileggi`,plateN:`Piatto {{n}}`,plateFilamentsUnreadable:`Non è stato possibile leggere i filamenti di un piatto selezionato, quindi non può essere assegnato. Deselezionalo per accodare gli altri.`,totalCost:`Costo totale:`,slotRemainingShort:` - {{grams}}g rim.`,printSettings:`Impostazioni stampa`,bedLeveling:`Livellamento piatto`,flowCalibration:`Calibrazione flusso`,vibrationCalibration:`Calibrazione vibrazioni`,layerInspection:`Ispezione primo layer`,timelapse:`Timelapse`,cancel:`Annulla`,noPrintersAvailable:`Nessuna stampante disponibile`,printerBusy:`Stampante occupata`,printerOffline:`Stampante offline`,sameTypeDifferentColor:`Stesso tipo, colore diverso`,filamentTypeNotLoaded:`Tipo di filamento non caricato`,statusReady:`Pronto`,statusColorMismatch:`Colore diverso`,statusTypeNotFound:`Tipo non trovato`,requiredTooltip:`Richiesto: {{name}} - {{color}}`,manuallySelected:`Selezionato manualmente`,autoMatched:`Abbinato automaticamente`,selectSlot:`Scegli slot`,exactColorMatch:`Corrispondenza esatta del colore`,slotForFilament:`Slot stampante per {{name}}`,overrideForFilament:`Sostituzione filamento per {{name}}`,sameTypeDifferentColorDetail:`Stesso tipo, colore diverso: richiede {{required}}, lo slot ha {{loaded}}`,requiredTypeNotInPrinter:`Tipo di filamento richiesto non trovato nella stampante.`,whenToPrint:`Quando stampare`,asap:`Subito`,queue:`Coda`,schedule:`Programma`,dateTime:`Data e ora`,invalidDateTime:`Inserisci data e ora valide`,openCalendar:`Apri calendario`,requireManualStart:`Richiedi avvio manuale`,requirePreviousSuccess:`Avvia solo se la stampa precedente è riuscita`,autoOffAfter:`Spegni la stampante al termine`,helpAsap:`La stampa verrà aggiunta in cima alla coda e partirà appena una stampante idonea è inattiva.`,helpSchedule:`La stampa partirà all'ora programmata se la stampante è inattiva. Se è occupata, attenderà che diventi disponibile.`,helpQueue:`La stampa verrà aggiunta in fondo alla coda.`,leftNozzle:`L`,rightNozzle:`R`,leftNozzleTooltip:`Ugello sinistro`,rightNozzleTooltip:`Ugello destro`,ftsSameInletHint:`Tutti i filamenti di questa stampa sono sul Filament Track Switch IN-{{inlet}}. Il cambio tra filamenti sullo stesso ingresso è più lento: spostane uno su un AMS dell'altro ingresso.`,rackPosition:`Posizione nel rack`,rackPositionTooltip:`Quale ugello del rack stampa questo filamento. Le posizioni sono numerate come sulla stampante.`,rackEmptyPosition:`Questa posizione del rack è vuota`,rackWrongNozzle:`Contiene un ugello {{has}}; questo filamento richiede {{needs}}`,filamentOverride:`Sostituzione filamento`,filamentOverrideHint:`Sostituisci opzionalmente i filamenti per l'assegnazione basata sul modello. Lo scheduler abbinerà i filamenti selezionati invece dei valori 3MF originali.`,originalFilament:`Originale`,overrideWith:`Sostituisci con`,resetToOriginal:`Ripristina originale`,insufficientFilamentTitle:`Filamento insufficiente`,waitingForAmsStatus:`In attesa dello stato AMS di {{printer}}…`,insufficientFilamentMessage:`Alcune bobine assegnate hanno meno filamento rimanente di quanto necessario per questa stampa:`,insufficientFilamentLine:`{{printer}} - {{slot}}: necessita di {{required}}g, rimanenti {{remaining}}g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: necessita di {{required}}g, {{remaining}}g disponibili tra le bobine corrispondenti (AMS Filament Backup)`,printAnyway:`Stampa comunque`,forceColorMatch:`Forza corrispondenza colore`,staggerPrinterStarts:`Scaglionare avvii`,staggerGroupSize:`Dimensione gruppo`,staggerInterval:`Intervallo (min)`,staggerPreview:`{{printers}} stampanti → {{groups}} gruppi di {{size}}, avvio ogni {{interval}} min`,staggerLastGroup:`ultimo gruppo: {{count}}`,staggerTotal:`totale: {{minutes}} min`,staggerToPrinters:`Scagliona a {{count}} stampanti`,gcodeInjection:`Inietta G-code auto-stampa`,insufficientBudget:`Budget insufficiente`,unlimitedNoBudget:`Illimitato – non è impostato alcun limite di budget.`,noPrintableCostCenters:`Non è disponibile alcun centro di costo attivo per la stampa. Chiedi a un amministratore di concederti l’accesso alla stampa.`},backup:{includesEncryptionKey:`I backup locali includono il file della chiave di crittografia MFA (DATA_DIR/.mfa_encryption_key), quindi un backup ZIP è autonomo. Tratta lo ZIP come sensibile — chiunque abbia il file può decifrare i client secret OIDC e i segreti TOTP contenuti.`,title:`Backup e ripristino`,createBackup:`Crea backup`,restoreBackup:`Ripristina backup`,restoreDescription:`Sostituisci tutti i dati da un file di backup`,downloadBackup:`Scarica backup`,uploadBackup:`Carica backup`,lastBackup:`Ultimo backup`,autoBackup:`Backup automatico`,backupNow:`Esegui backup ora`,restoreWarning:`Avviso: il ripristino sovrascriverà tutti i dati attuali.`,includeArchives:`Includi archivi`,includeSettings:`Includi impostazioni`,includeProfiles:`Includi profili`,backupSuccess:`Backup creato con successo`,restoreSuccess:`Backup ripristinato con successo`,backupFailed:`Backup fallito`,restoreFailed:`Ripristino fallito`,restoreNote:`La stampante virtuale verrà fermata durante il ripristino`,githubBackup:`Backup GitHub`,enabled:`Abilitato`,cloudLoginRequired:`Accesso Bambu Cloud richiesto. Accedi in Profili → Profili Cloud per abilitare il backup GitHub.`,cloudLoginRequiredShort:`Accesso Cloud richiesto`,githubDescription:`Sincronizza automaticamente i tuoi profili con un repository GitHub privato per backup e cronologia delle versioni.`,repoIsPrivate:`Il repository è privato — è sicuro effettuare il backup.`,repoIsPublicWarning:`Il repository è PUBBLICO. I backup di Bambuddy includono credenziali MQTT, token di Home Assistant, token di Prometheus, la tua e-mail Bambu Cloud e i codici di accesso alle stampanti tramite K-profile. Il salvataggio è bloccato finché non rendi privato il repository nelle impostazioni del tuo provider.`,repoVisibilityUnknown:`Impossibile determinare la visibilità del repository. Bambuddy rifiuta di eseguire backup su qualsiasi target non confermato come privato; il salvataggio sarà bloccato.`,repositoryUrl:`URL del repository`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Consenti HTTP non sicuro`,allowInsecureHttpHint:`Abilita per istanze self-hosted su reti private senza TLS`,personalAccessToken:`Token di accesso personale`,tokenSaved:`(salvato)`,enterNewToken:`Inserisci un nuovo token per aggiornare`,tokenHintGitHub:`Token a grana fine con accesso in lettura e scrittura a Contents, oppure token classico con ambito repo.`,tokenHintGitLab:`Token con ambito api, oppure read_repository insieme a write_repository.`,tokenHintGitea:`Token con ambito write:repository.`,tokenHintForgejo:`Token con ambito write:repository. Basta un token limitato a questo solo repository.`,branch:`Branch`,provider:`Provider Git`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Solo manuale`,hourly:`Ogni ora`,daily:`Giornaliero`,weekly:`Settimanale`,includeInBackup:`Includi nel backup`,kProfiles:`K-Profili`,kProfilesDescription:`Calibrazione dell'avanzamento pressione dalle stampanti connesse`,noPrintersConnected:`Nessuna stampante connessa`,printersConnected:`{{connected}}/{{total}} connesse`,cloudProfiles:`Profili Cloud`,cloudProfilesDescription:`Preset di filamento, stampante e processo da Bambu Cloud e Orca Cloud`,cloudProfilesAccounts:`Account collegati — Bambu Cloud: {{bambu}}, Orca Cloud: {{orca}}`,appSettings:`Impostazioni App`,appSettingsDescription:`Configurazione Bambuddy (database completo)`,spoolInventory:`Inventario bobine`,spoolInventoryDescription:`Bobine di filamento, cronologia utilizzo e tracciamento costi`,printArchives:`Archivi di stampa`,printArchivesDescription:`Metadati della cronologia di stampa (nessun file gcode/3MF)`,lastBackupAt:`Ultimo backup:`,noBackupsYet:`Nessun backup ancora`,next:`Prossimo:`,startingBackup:`Avvio del backup...`,test:`Test`,enableBackup:`Abilita backup`,testConnection:`Testa connessione`,enterRepoUrl:`Inserisci l'URL del repository`,enterRepoAndToken:`Inserisci l'URL del repository e il token di accesso`,repoRequired:`L'URL del repository è obbligatorio`,tokenRequired:`Il token di accesso è obbligatorio`,githubBackupEnabled:`Backup GitHub abilitato`,tokenUpdated:`Token aggiornato`,settingsSaved:`Impostazioni salvate`,failedToSave:`Salvataggio fallito: {{message}}`,backupCompleteFiles:`Backup completato - {{count}} file aggiornati`,backupSkippedNoChanges:`Backup saltato - nessuna modifica`,backupFailed2:`Backup fallito: {{message}}`,clearedLogs:`{{count}} log eliminati`,failedToClearLogs:`Eliminazione log fallita: {{message}}`,restoreFromGit:{button:`Ripristina da Git`,title:`Ripristina dal backup Git`,subtitle:`Scegli un commit e cosa ripristinare`,commitLabel:`Commit del backup`,latestCommit:`Ultimo backup (punta del branch)`,categoriesLabel:`Cosa ripristinare`,inspecting:`Lettura del contenuto del backup...`,itemCount:`{{count}} nel backup`,overwriteLabel:`Sovrascrivi le voci esistenti`,overwriteOn:`Le voci esistenti verranno aggiornate dal backup.`,overwriteOff:`Vengono aggiunte solo le voci mancanti; quelle esistenti restano invariate.`,selectedCount:`{{count}} selezionati`,restoring:`Ripristino in corso...`,confirmTitle:`Ripristinare dal backup?`,confirmMessage:`Le categorie selezionate verranno ripristinate da questo commit. Le voci mancanti vengono aggiunte, quelle esistenti restano invariate.`,confirmMessageOverwrite:`Le categorie selezionate verranno ripristinate da questo commit sovrascrivendo le voci già presenti in locale. Operazione non annullabile.`,kprofilesOverwriteCaveat:`I profili K sono l'eccezione: scrivere uno slot sostituisce sempre la calibrazione sulla stampante.`,tally:`{{restored}} ripristinati, {{skipped}} saltati, {{failed}} non riusciti`,reloadHint:`Ricarica Bambuddy per vedere i dati ripristinati in tutte le sezioni.`,partialHint:`Le categorie elencate sopra sono state completate e salvate. Quelle mancanti non sono state eseguite.`,failed:`Ripristino non riuscito.`,loadFailed:`Impossibile leggere il repository di backup.`,details:{notPresent:`Non presente in questo commit di backup`,unreadableJson:`JSON illeggibile: {{paths}}`,settingsNoPayload:`Nessuna impostazione nei dati`,settingsCredentialsWillSkip:`{{count}} chiavi simili a credenziali verranno saltate`,settingsCompanionWillSkip:`{{count}} chiavi simili a credenziali verranno saltate e {{companion}} interruttori che dipendono da esse resteranno disattivati`,settingsCompanionOnlyWillSkip:`{{companion}} interruttori resteranno disattivati - le credenziali necessarie a ciascuno non possono essere ripristinate da un backup`,spoolsUsageCount:`inclusi {{count}} record di consumo`,archivesMetadataOnly:`Solo metadati - i file 3MF e le miniature non sono in un backup Git`,kprofilesPrinterCount:`su {{count}} stampanti`},notes:{noData:`Nessun dato di questo tipo in questo backup`,archivesPrinterMissing:`Alcuni archivi facevano riferimento a stampanti non più esistenti - collegamento rimosso`,archivesProjectMissing:`Alcuni archivi facevano riferimento a progetti non più esistenti - collegamento rimosso`,archivesOwnerCleared:`Alcuni archivi facevano riferimento a utenti non più esistenti - proprietario rimosso, quindi sono visibili solo agli utenti con il permesso archives:read_all finché un amministratore non li riassegna`,archivesOwnerUnmatched:`Alcuni archivi indicano un proprietario che questa istanza non ha - il proprietario è stato rimosso anziché dedotto dall'id utente del backup, quindi sono visibili solo agli utenti con il permesso archives:read_all finché un amministratore non li riassegna`,archivesOwnerUnknown:`Alcuni archivi sono stati ripristinati senza proprietario - questo backup non ne registra alcuno, quindi sono visibili solo agli utenti con il permesso archives:read_all finché un amministratore non li riassegna`,archivesUndeleted:`Gli archivi eliminati dopo il backup sono di nuovo visibili - la sovrascrittura era attiva`,archivesMetadataOnly:`Gli archivi ripristinati contengono solo metadati - i file 3MF e le miniature non sono in un backup Git`,spoolUsageUnresolved:`{{count}} record di consumo saltati - la loro bobina non è nell'elenco bobine di questo backup, quindi non c'è nulla a cui collegarli.`,spoolUsageUnlinked:`{{count}} record di consumo ripristinati senza il collegamento alla cronologia di stampa - seleziona Archivi di stampa insieme a Inventario bobine per mantenerlo.`,spoolTagKept:`{{count}} tag bobina lasciati invariati - il backup avrebbe cancellato un tag nel frattempo scansionato, oppure lo avrebbe spostato su una seconda bobina.`,settingsCredentialsSkipped:`{{count}} chiavi simili a credenziali saltate - reinserisci i segreti manualmente`,settingsAuthSkipped:`{{count}} impostazioni di autenticazione saltate - modificale in Impostazioni > Autenticazione così i controlli di blocco restano attivi`,settingsCompanionSkipped:`{{keys}} lasciati disattivati - la credenziale richiesta da ciascuno non può essere ripristinata da un backup e questa istanza non ne ha nessuna salvata, quindi attivarli lascerebbe l'integrazione senza autenticazione`,settingsMqttRelayFailed:`Impostazioni MQTT ripristinate, ma il relay non è stato riconnesso - riavvia Bambuddy`,kprofilesAlwaysOverwrite:`I profili K sovrascrivono sempre lo slot corrispondente sulla stampante`,kprofilesAckUnreliable:`Una stampante che non risponde conta comunque come ripristinata - verifica i profili sulla stampante`,kprofilesPrinterMissing:`Nessuna stampante con numero di serie {{serial}} - saltato`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) non è connessa - saltato`,kprofilesUnknownNozzle:`Diametro ugello inatteso {{nozzle}} per {{serial}} - inviato così com'è`,kprofilesUnmatched:`{{count}} profili per {{nozzle}} non avevano corrispondenza su {{printer}} - aggiunti come nuovi profili`,kprofilesSendFailed:`Impossibile inviare i profili {{nozzle}} a {{printer}} ({{serial}})`,kprofilesRefused:`{{printer}} ({{serial}}) ha rifiutato i profili {{nozzle}}: {{reason}}`,kprofilesStepFailed:`Non è stato possibile completare il passaggio dei profili K - {{reason}}. Quanto ripristinato prima resta salvato.`}},history:`Cronologia`,clear:`Cancella`,date:`Data`,status:`Stato`,trigger:`Tipo`,triggers:{manual:`Backup (manuale)`,scheduled:`Backup (pianificato)`,restore:`Ripristino`},commit:`Commit`,localBackup:`Backup locale`,localBackupDescription:`Crea un backup completo dei tuoi dati Bambuddy includendo database, archivi, upload e tutti i file.`,downloadBackupLabel:`Scarica backup`,completeBackupZip:`Backup completo: database + tutti i file (ZIP)`,download:`Scarica`,preparingBackup:`Preparazione del backup...`,creatingArchive:`Creazione dell'archivio di backup... Potrebbe richiedere del tempo per archivi di grandi dimensioni.`,downloadingFile:`Download del file di backup...`,backupDownloaded:`Backup scaricato con successo`,failedToCreateBackup:`Creazione del backup fallita: {{message}}`,restore:`Ripristina`,restoreReplacesAll:`Il ripristino sostituisce tutti i dati.`,restoreReplacesAllDetail:`Il database e i file attuali verranno completamente sostituiti. È necessario un riavvio dopo il ripristino.`,restoreConfirmTitle:`Ripristina backup`,restoreConfirmMessage:`Sei sicuro di voler ripristinare da "{{filename}}"? Questo sostituirà completamente il tuo database e tutti i file. L'applicazione dovrà essere riavviata dopo il ripristino.`,restoreConfirmButton:`Ripristina backup`,uploadingFile:`Caricamento del file di backup...`,backupRestoredRestart:`Backup ripristinato. Riavvia Bambuddy.`,failedToRestore:`Ripristino del backup fallito. Controlla il formato del file.`,reloadNow:`Ricarica ora`,creatingBackup:`Creazione del backup`,restoringBackup:`Ripristino del backup`,preparing:`Preparazione...`,processing:`Elaborazione...`,doNotClosePage:`Non chiudere questa pagina e non navigare altrove. Questa operazione potrebbe richiedere diversi minuti per backup di grandi dimensioni.`,restoring:`Ripristino in corso...`,restoreComplete:`Ripristino completato`,restoreFailed2:`Ripristino fallito`,importSettings:`Importa impostazioni da un file di backup`,pleaseWaitRestoring:`Attendere durante il ripristino dei dati`,selectBackupFile:`Clicca per selezionare un file di backup (.json o .zip)`,duplicateHandling:`Come funziona la gestione dei duplicati:`,matchPrinters:`Stampanti`,matchPrintersBy:`corrispondenza per numero di serie`,matchSmartPlugs:`Smart Plug`,matchSmartPlugsBy:`corrispondenza per indirizzo IP`,matchNotificationProviders:`Provider di notifica`,matchNotificationProvidersBy:`corrispondenza per nome`,matchFilaments:`Filamenti`,matchFilamentsBy:`corrispondenza per nome + tipo + marca`,matchArchives:`Archivi`,matchArchivesBy:`corrispondenza per hash del contenuto (sempre saltato)`,matchPendingUploads:`Upload in sospeso`,matchPendingUploadsBy:`corrispondenza per nome file`,matchSettingsTemplates:`Impostazioni e modelli`,matchSettingsTemplatesBy:`sempre sovrascritti`,replaceExisting:`Sostituisci dati esistenti`,keepExisting:`Mantieni dati esistenti`,overwriteDescription:`Sovrascrivi gli elementi già esistenti con i dati del backup`,keepDescription:`Ripristina solo gli elementi che non esistono ancora`,overwriteCaution:`Attenzione:`,overwriteWarning:`La sovrascrittura sostituirà le configurazioni attuali con i dati del backup. I codici di accesso delle stampanti non vengono mai sovrascritti per sicurezza.`,cancel:`Annulla`,processingBackup:`Elaborazione del file di backup...`,itemsRestored:`Elementi ripristinati`,itemsSkipped:`Elementi saltati`,restored:`Ripristinati`,skippedAlreadyExist:`Saltati (già esistenti)`,filesCategory:`File (3MF, miniature, ecc.)`,andMore:`...e altri {{count}}`,newApiKeysGenerated:`Nuove chiavi API generate`,keysShownOnce:`Queste chiavi vengono mostrate solo una volta. Copiale ora!`,copy:`Copia`,noDataFound:`Nessun dato da ripristinare trovato nel file di backup.`,close:`Chiudi`,scheduledBackup:`Backup pianificati`,scheduledBackupDescription:`Crea automaticamente snapshot di backup secondo una pianificazione. La directory di output può essere montata su un NAS o storage esterno.`,frequency:`Frequenza`,backupTime:`Tempo`,retention:`Conservazione`,retentionDescription:`Numero di backup da conservare`,outputPath:`Percorso di output`,outputPathPlaceholder:`Predefinito: {{path}}`,outputPathDescription:`Lasciare vuoto per la posizione predefinita`,runNow:`Esegui ora`,backupFiles:`File di backup`,noScheduledBackups:`Nessun backup ancora`,deleteBackup:`Elimina`,deleteBackupConfirm:`Eliminare questo file di backup?`,backupRunning:`Backup in corso...`,scheduledBackupComplete:`Backup completato con successo`,scheduledBackupFailed:`Backup fallito`,nextBackup:`Prossimo backup`,backupSize:`Dimensione`,localTimeHint:`Ora locale ({{tz}})`,defaultPathLabel:`Predefinito:`,pathCheck:{title:`Bambuddy non riesce a scrivere in questa directory`,howToFix:`Come risolvere:`,sandboxed:`Il servizio Bambuddy non riesce a scrivere in {{path}}. La sua unit systemd usa ProtectSystem=strict, che rende ogni directory al di fuori di quelle di installazione, dati e log di sola lettura per il servizio - anche una in cui puoi scrivere dalla tua shell.`,read_only:`{{path}} si trova su un filesystem di sola lettura.`,permission_denied:`Bambuddy non ha il permesso di scrivere in {{path}}. Controlla proprietario e permessi della directory.`,no_space:`Il filesystem che contiene {{path}} è pieno.`,not_a_directory:`{{path}} esiste ma non è una directory.`,missing:`{{path}} non esiste e non è stato possibile crearla.`,error:`Bambuddy non riesce a scrivere in {{path}}.`,ephemeralTitle:`Questi backup non sopravvivono alla ricreazione del container`,container_ephemeral:`{{path}} si trova dentro il container Bambuddy, non sull'host. I backup scritti lì vanno persi quando il container viene ricreato. Monta la directory dall'host:`},categories:{settings:`Impostazioni`,notification_providers:`Provider di notifica`,notification_templates:`Modelli di notifica`,smart_plugs:`Smart Plug`,printers:`Stampanti`,filaments:`Filamenti`,maintenance_types:`Tipi di manutenzione`,archives:`Archivi`,projects:`Progetti`,pending_uploads:`Upload in sospeso`,external_links:`Link esterni`,api_keys:`Chiavi API`}},tags:{title:`Tag`,addTag:`Aggiungi tag`,editTag:`Modifica tag`,deleteTag:`Elimina tag`,tagName:`Nome tag`,tagColor:`Colore tag`,noTags:`Nessun tag`,deleteConfirm:`Sei sicuro di voler eliminare questo tag?`,manageTags:`Gestisci tag`},uploadModal:{title:`Carica file 3MF`,dragDrop:`Trascina e rilascia file .3mf qui`,or:`o`,browseFiles:`Sfoglia file`,extractionInfo:`Il modello stampante sarà estratto automaticamente dai metadati del file 3MF.`,uploaded:`caricati`,failed:`falliti`,uploading:`Caricamento...`,upload:`Carica`,uploadFailed:`Caricamento fallito`},editArchive:{title:`Modifica archivio`,name:`Nome`,namePlaceholder:`Nome stampa`,printer:`Stampante`,noPrinter:`Nessuna stampante`,project:`Progetto`,noProject:`Nessun progetto`,itemsPrinted:`Elementi stampati`,itemsPrintedHelp:`Numero di elementi prodotti in questo job di stampa. Usa 0 se l'intero piatto è rovinato.`,filamentUsed:`Filamento usato (g)`,filamentUsedPlaceholder:`es. 46.16`,filamentUsedHelp:`Inseriscilo a mano quando una stampa è stata archiviata senza il suo 3MF, così da farla rientrare comunque nei totali del filamento. La riscansione di un archivio che ha il suo 3MF rilegge il valore dal file.`,notes:`Note`,notesPlaceholder:`Aggiungi note su questa stampa...`,externalLink:`Link esterno`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Link a Printables, Thingiverse o altra fonte`,tags:`Tag`,tagsPlaceholder:`Aggiungi tag...`,addMoreTags:`Aggiungi altri tag...`,matchingTags:`Tag corrispondenti "{{query}}"`,existingTags:`Tag esistenti`,clickToAdd:`(clicca per aggiungere)`,status:`Stato`,failureReason:`Motivo fallimento`,selectReason:`Seleziona motivo...`,photos:`Foto del risultato stampato`,photosHelp:`Clicca + per aggiungere foto del risultato stampato`,printResult:`Risultato stampa`,saving:`Salvataggio...`,failureReasons:{adhesionFailure:`Fallimento adesione`,spaghettiDetached:`Spaghetti / staccato`,layerShift:`Spostamento layer`,cloggedNozzle:`Ugello intasato`,filamentRunout:`Filamento esaurito`,warping:`Deformazione`,stringing:`Filamento`,underExtrusion:`Sotto-estrusione`,powerFailure:`Mancanza corrente`,userCancelled:`Annullato dall'utente`,noStatusUpdate:`Nessun aggiornamento di stato ricevuto`,other:`Altro`},statuses:{completed:`Completato`,failed:`Fallito`,aborted:`Annullato`,printing:`In stampa`}},kProfiles:{title:`Profili K`,noPrintersConfigured:`Nessuna stampante configurata`,addPrinterInSettings:`Aggiungi una stampante in Impostazioni per gestire i K-profiles`,noActivePrinters:`Nessuna stampante attiva`,enablePrinterConnection:`Abilita una connessione stampante per vedere i K-profiles`,loadingProfiles:`Caricamento K-Profiles...`,printerOffline:`Stampante offline`,printerOfflineDesc:`La stampante selezionata non e connessa. Accendila per vedere i K-profiles.`,noMatchingProfiles:`Nessun profilo corrispondente`,noMatchingProfilesDesc:`Nessun profilo corrisponde ai criteri di ricerca`,noKProfiles:`Nessun K-Profile`,noKProfilesDesc:`Nessun profilo pressure advance per ugello da {{diameter}}mm`,createFirstProfile:`Crea primo profilo`,printer:`Stampante`,nozzle:`Ugello`,refresh:`Aggiorna`,addProfile:`Aggiungi profilo`,export:`Esporta`,import:`Importa`,select:`Seleziona`,selectAll:`Seleziona tutto`,delete:`Elimina`,searchPlaceholder:`Cerca per nome o filamento...`,allExtruders:`Tutti gli estrusori`,leftOnly:`Solo sinistro`,rightOnly:`Solo destro`,allFlow:`Tutto flow`,hfOnly:`Solo HF`,sOnly:`Solo S`,sortName:`Ordina: Nome`,sortKValue:`Ordina: K-Value`,sortFilament:`Ordina: Filamento`,leftExtruder:`Estrusore sinistro`,rightExtruder:`Estrusore destro`,modal:{addTitle:`Aggiungi K-Profile`,editTitle:`Modifica K-Profile`,profileName:`Nome profilo`,profileNamePlaceholder:`Il mio profilo PLA`,kValue:`Valore K`,kValuePlaceholder:`0.020`,kValueHelp:`Intervallo tipico: 0.01 - 0.06 per PLA, 0.02 - 0.10 per PETG`,filament:`Filamento`,selectFilament:`Seleziona filamento...`,source:{local:`Importato`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Integrato`},noFilamentsHelp:`Nessun filamento disponibile. Accedi a Bambu Cloud o importa i preset da Profili → Profili locali.`,searchFilaments:`Cerca filamenti...`,noFilamentMatches:`Nessun filamento corrisponde alla ricerca`,flowType:`Tipo flow`,highFlow:`Alto flusso`,standard:`Standard`,nozzleSize:`Dimensione ugello`,extruder:`Estrusore`,extruders:`Estrusori`,left:`Sinistra`,right:`Destra`,notes:`Note (salvate localmente)`,notesPlaceholder:`Aggiungi note su questo profilo...`,notesHelp:`Le note sono salvate in Bambuddy, non sulla stampante`,syncing:`Sincronizzazione con stampante...`,savingExtruder:`Salvataggio su estrusore {{current}}/{{total}}...`,pleaseWait:`Attendere`},deleteConfirm:{title:`Elimina profilo`,cannotUndo:`Questo non può essere annullato`,message:`Sei sicuro di voler eliminare "{{name}}" dalla stampante?`},bulkDelete:{title:`Elimina profili`,cannotUndo:`Questo non può essere annullato`,message:`Sei sicuro di voler eliminare {{count}} profili selezionati dalla stampante?`},toast:{profileSaved:`K-profile salvato`,profilesSaved:`K-profile salvato su {{count}} estrusori`,selectAtLeastOneExtruder:`Seleziona almeno un estrusore`,selectFilament:`Seleziona prima un filamento`,filamentNotResolvable:`Nessun ID filamento Bambu per {{name}}: la stampante non può salvare un profilo`,profileDeleted:`K-profile eliminato`,profilesDeleted:`Eliminati {{count}} profili`,exportedProfiles:`Esportati {{count}} profili`,importedProfiles:`Importati {{count}} di {{total}} profili`,noProfilesToExport:`Nessun profilo da esportare`,invalidFileFormat:`Formato file non valido`,failedToParseImport:`Parsing file import fallito`,failedToSaveBatch:`Salvataggio K-profiles fallito`,noteSaved:`Nota salvata`,failedToSaveNote:`Salvataggio nota fallito`},permission:{noRead:`Non hai il permesso di aggiornare i profili`,noCreate:`Non hai il permesso di aggiungere profili`,noUpdate:`Non hai il permesso di aggiornare K-profiles`,noDelete:`Non hai il permesso di eliminare K-profiles`,noExport:`Non hai il permesso di esportare profili`,noImport:`Non hai il permesso di importare profili`}},virtualPrinter:{title:`Stampante virtuale`,running:`In esecuzione`,stopped:`Ferma`,description:{default:`Abilita una stampante virtuale che appare in Bambu Studio e OrcaSlicer. I file inviati a questa stampante saranno archiviati senza stampare.`,proxy:`Abilita un proxy che inoltra il traffico slicer a una stampante reale, permettendo la stampa remota su qualsiasi rete.`},enable:{title:`Abilita stampante virtuale`,visibleInSlicer:`Visibile come "Bambuddy" nella ricerca slicer`,proxyingTo:`In proxy verso {{name}}`,notActive:`Non attivo`},model:{title:`Modello stampante`,description:`Seleziona il modello stampante da emulare.`,restartWarning:`Cambiare il modello riavviera la stampante virtuale`},accessCode:{title:`Codice accesso`,isSet:`Codice accesso impostato`,notSet:`Nessun codice accesso impostato - richiesto per abilitare`,placeholder:`Inserisci codice 8 caratteri`,placeholderChange:`Inserisci nuovo codice per cambiare`,hint:`Deve essere esattamente 8 caratteri. Usato dagli slicer per autenticarsi.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Ereditato dalla stampante target`,derivedFromTargetHint:`Usa il codice di accesso della stampante target. Il bridge inoltra l'autenticazione dello slicer alla stampante reale, quindi i codici devono corrispondere — modifica il codice nelle impostazioni della stampante per cambiarlo.`,reveal:`Mostra codice accesso`,hide:`Nascondi codice accesso`},targetPrinter:{title:`Stampante target`,configured:`Target proxy configurato`,notConfigured:`Nessuna stampante target selezionata - richiesta per modalita proxy`,placeholder:`Seleziona una stampante...`,hint:`Seleziona la stampante a cui fare proxy. La stampante deve essere in modalita LAN.`,noPrinters:`Nessuna stampante configurata. Aggiungi una stampante per usare la modalita proxy.`},remoteInterface:{title:`Sovrascrittura interfaccia di rete`,configured:`Sovrascrittura interfaccia attiva`,optional:`Opzionale - usare se l'IP rilevato automaticamente e sbagliato (es. piu NIC, Docker, VPN)`,placeholder:`Rilevamento automatico (predefinito)...`,hint:`Sovrascrive l'indirizzo IP pubblicizzato via SSDP e usato nel certificato TLS. Utile quando Bambuddy ha piu interfacce di rete.`},mode:{title:`Modalita`,archive:`Archivio`,archiveDesc:`Archivia subito i file`,review:`Revisione`,reviewDesc:`Rivedi prima di archiviare`,queue:`Coda`,queueDesc:`Archivia e aggiungi alla coda`,proxy:`Proxy`,proxyDesc:`Inoltra a stampante reale`},autoDispatch:{title:`Avvio automatico`,description:`Avvia automaticamente le stampe aggiunte alla coda. Se disattivato, le stampe attendono l'avvio manuale.`},queueForceColorMatch:{title:`Forza corrispondenza colori`,description:`Rifiuta di inviare a una stampante che non ha esattamente il tipo di filamento e il colore caricato. Disattivato per impostazione predefinita — senza questo, la coda usa solo la corrispondenza per modello e potrebbe scegliere una stampante con il colore sbagliato.`},saveAmsMapping:{title:`Salva mappatura AMS`,description:`Salva nell'archivio la scelta dello slot AMS effettuata dallo slicer stesso (dal comando MQTT project_file), in modo che una ristampa successiva riutilizzi la stessa bobina fisica invece di ricavarla di nuovo dal tipo/colore del file. Disattivato per impostazione predefinita.`},gcodeInjection:{title:`Iniezione G-code`,description:`Applica gli snippet G-code configurati per modello nelle Impostazioni ai lavori di questo VP. Disattivato per impostazione predefinita.`},tailscaleDisabled:{title:`Integrazione Tailscale`,description:`Abilita per contrassegnare questo VP come esposto tramite Tailscale. Mostra l'indirizzo Tailscale dell'host così sai quale IP incollare nello slicer. Il passo di importazione CA è invariato — questo toggle non ha effetto sui certificati.`},setupRequired:{title:`Configurazione necessaria`,description:`La stampante virtuale richiede configurazioni di sistema aggiuntive prima di funzionare. Include port forwarding, regole firewall e impostazioni specifiche della piattaforma.`,readGuide:`Leggi la guida prima di abilitare`},howItWorks:{title:`Come funziona`,step1:`Sulla stessa LAN, le stampanti virtuali appaiono automaticamente nel tuo slicer (Bambu Studio / OrcaSlicer). Da altre reti, aggiungile manualmente tramite indirizzo IP e codice di accesso.`,step2:`In modalità Archivio, Revisione e Coda, usa il pulsante "Invia" nel tuo slicer per caricare file 3MF su Bambuddy. Lo slicer mostrerà "Stampa riuscita" — il file viene salvato, non stampato.`,step3:`In modalità Proxy, la stampante virtuale inoltra tutto il traffico a una stampante reale — le stampe partono immediatamente come con una connessione diretta.`},status:{title:`Dettagli stato`,printerName:`Nome stampante`,model:`Modello`,serialNumber:`Numero seriale`,mode:`Modalita`,pendingFiles:`File in sospeso`,targetPrinter:`Stampante target`,ftpPort:`Porta FTP`,mqttPort:`Porta MQTT`,ftpConnections:`Connessioni FTP`,mqttConnections:`Connessioni MQTT`},toast:{updated:`Impostazioni stampante virtuale aggiornate`,failedToUpdate:`Aggiornamento impostazioni fallito`,copyFailed:`Copia non riuscita — seleziona il testo manualmente`,accessCodeRequired:`Imposta prima un codice accesso`,targetPrinterRequired:`Seleziona prima una stampante target`,bindIpRequired:`Impostare prima un indirizzo IP`,accessCodeEmpty:`Il codice accesso non può essere vuoto`,accessCodeLength:`Il codice accesso deve essere esattamente 8 caratteri`,targetCodeChangedRebind:`Il codice di accesso ora corrisponde alla nuova stampante target. Ri-aggiungi questo dispositivo nel tuo slicer per acquisire il nuovo codice.`,created:`Stampante virtuale creata`,failedToCreate:`Impossibile creare la stampante virtuale`,deleted:`Stampante virtuale eliminata`,failedToDelete:`Impossibile eliminare la stampante virtuale`},list:{title:`Stampanti virtuali`,add:`Aggiungi`,addFirst:`Aggiungi stampante virtuale`,empty:`Nessuna stampante virtuale configurata. Aggiungine una per iniziare.`},bindIp:{title:`Interfaccia di rete`,placeholder:`Seleziona interfaccia...`,hint:`Interfaccia di rete a cui questa stampante virtuale si collega. Deve essere unica per stampante.`},proxy:{accessCodeHint:`In modalita proxy, usa il codice di accesso della stampante di destinazione nello slicer. La connessione viene inoltrata in modo trasparente alla stampante reale.`},addDialog:{title:`Aggiungi stampante virtuale`,name:`Nome`,hint:`Potrai configurare il codice di accesso, la stampante di destinazione e altre impostazioni dopo la creazione.`,create:`Crea`},deleteConfirm:{title:`Elimina stampante virtuale`,message:`Sei sicuro di voler eliminare "{{name}}"? Tutti i servizi di questa stampante verranno interrotti.`},archiveNameSource:{title:`Origine nome archivio`,description:`Scegli come vengono nominati i nuovi archivi quando i file arrivano tramite la stampante virtuale. "Metadati" utilizza il titolo incorporato nello slicer dal 3MF (default). "Nome file" utilizza il nome che Bambu Studio ha inviato via FTP. Nota: Bambu Studio sovrascrive il nome digitato nella finestra "invia a stampante" con il campo Titolo del 3MF quando presente, quindi entrambe le modalità producono spesso la stessa stringa.`,metadata:`Metadati`,filename:`Nome file`},caCert:{title:`Certificato dello slicer`,description:`Le stampanti virtuali usano un certificato TLS firmato dalla CA di Bambuddy. Importa questo certificato CA nell'archivio attendibile del tuo slicer una sola volta affinché accetti la connessione — senza doverlo copiare dalla riga di comando.`,copy:`Copia`,copied:`Copiato`,download:`Scarica`,fingerprint:`SHA-256`}},modelViewer:{openInSlicer:`Apri nello slicer`,openInSlicerWith:`Apri in {{slicer}}`,moreSlicerOptions:`Altre opzioni dello slicer`,openInSlicerFailed:`Impossibile aprire nello slicer`,tabs:{model:`Modello 3D`},notAvailable:`non disponibile`,plates:`Piatti`,allPlates:`Tutti i piatti`,plateNumber:`Piatto {{number}}`,plateCount:`{{count}} piatto`,plateCount_other:`{{count}} piatti`,objectCount:`{{count}} oggetto`,objectCount_other:`{{count}} oggetti`,filamentCount:`{{count}} filamento`,filamentCount_other:`{{count}} filamenti`,eta:`ETA {{minutes}} min`,noPreview:`Nessuna anteprima disponibile per questo file`,pagination:{pageOf:`Pagina {{current}} di {{total}}`,prev:`Prec`,next:`Succ`},errors:{failedToLoad:`Caricamento file fallito`,noMeshes:`Nessuna mesh trovata nel file 3MF`,unsupportedFormat:`Formato file non supportato`}},maintenanceDescriptions:{lubricateCarbonRods:`Applica lubrificante alle aste in carbonio per un movimento fluido`,lubricateRails:`Applica lubrificante alle guide lineari per un movimento fluido`,cleanNozzle:`Pulisci hotend e ugello per prevenire intasamenti`,checkBelts:`Verifica tensione cinghie per stampe accurate`,cleanBuildPlate:`Pulisci il piatto per migliorare l'adesione`,checkExtruder:`Ispeziona ingranaggi estrusore per usura`,checkCooling:`Assicurati che le ventole di raffreddamento funzionino`,generalInspection:`Ispezione generale stampante`,cleanCarbonRods:`Pulisci le aste in carbonio per ridurre attrito`,lubricateSteelRods:`Applica lubrificante alle aste in acciaio per un movimento fluido`,cleanSteelRods:`Pulisci le aste in acciaio per ridurre attrito`,cleanLinearRails:`Pulisci le guide lineari per rimuovere polvere e detriti`,checkPtfeTube:`Ispeziona il tubo PTFE per usura o danni`,replaceHepaFilter:`Sostituisci filtro HEPA per qualità aria`,replaceCarbonFilter:`Sostituisci filtro a carbone attivo`,lubricateLeftNozzleRail:`Lubrifica guida ugello sinistro (serie H2)`},haSensors:{label:`Sensori`,unavailable:`Non disponibile`,blocksPrints:`{{entity}} — trattiene le stampe finché l'allarme è attivo`,states:{open:`Aperto`,closed:`Chiuso`,unlocked:`Sbloccato`,locked:`Bloccato`,detected:`Rilevato`,clear:`Libero`,wet:`Bagnato`,dry:`Asciutto`,problem:`Problema`,ok:`OK`,running:`In funzione`,stopped:`Fermo`,on:`Acceso`,off:`Spento`},sectionTitle:`Sensori Home Assistant (stampanti)`,add:`Aggiungi sensore`,addTitle:`Aggiungi sensore Home Assistant`,editTitle:`Modifica sensore Home Assistant`,empty:`Nessun sensore. Collega un contatto porta o un termometro da Home Assistant per mostrarlo sulla scheda stampante.`,unknownPrinter:`Stampante sconosciuta`,badgeBlocks:`Trattiene le stampe`,badgeNotifies:`Notifica`,badgeHidden:`Nascosto sulla scheda`,printer:`Stampante`,entity:`Entità`,searchPlaceholder:`Cerca entità...`,noEntities:`Nessuna entità corrispondente`,name:`Nome visualizzato`,alertWhen:`Allarme quando`,alertNever:`Mai — solo visualizzazione`,alertAbove:`Sopra`,alertBelow:`Sotto`,alertHint:`Lo stato di allarme evidenzia il sensore sulla scheda stampante e abilita le opzioni sottostanti.`,showOnCard:`Mostra sulla scheda stampante`,notifyOnAlert:`Invia una notifica quando scatta l'allarme`,blockPrint:`Trattieni le stampe in coda finché l'allarme è attivo`,blockPrintHint:`I lavori restano in coda e partono da soli quando il sensore rientra. Ignorato finché Home Assistant non è raggiungibile.`,toast:{created:`Sensore aggiunto`,updated:`Sensore salvato`,deleted:`Sensore rimosso`},error:{pickEntity:`Scegli un'entità Home Assistant`,nameRequired:`Inserisci un nome visualizzato`,printerRequired:`Scegli una stampante`,alertRequired:`Imposta prima una condizione di allarme`}},locationHaSensors:{sectionTitle:`Sensori Home Assistant (posizioni di archiviazione)`,sectionDescription:`Collega sensori di temperatura, umidità o batteria di Home Assistant alle tue posizioni di archiviazione per mostrare le letture in tempo reale sulla scheda del filamento e nella tabella. È consentito un solo sensore per categoria per posizione.`,add:`Aggiungi sensore`,addTitle:`Aggiungi sensore Home Assistant`,editTitle:`Modifica sensore Home Assistant`,empty:`Nessun sensore. Collega un sensore di temperatura o umidità da Home Assistant per mostrarlo sulla scheda del filamento.`,unknownLocation:`Posizione sconosciuta`,location:`Posizione di archiviazione`,showOnCard:`Mostra sulla scheda del filamento`,overwriteConfirm:{title:`Sostituire il sensore esistente?`,messageTemperature:`"{{location}}" ha già un sensore di temperatura collegato: {{name}}. Continuando verrà sostituito.`,messageHumidity:`"{{location}}" ha già un sensore di umidità collegato: {{name}}. Continuando verrà sostituito.`,messageBattery:`"{{location}}" ha già un sensore di batteria collegato: {{name}}. Continuando verrà sostituito.`},autoAdd:{confirmTitle:`Aggiungere anche gli altri sensori?`,confirmMessage:`Bambuddy ha trovato anche altri sensori per questa posizione. Scegli quali aggiungere.`,added:`Aggiunto anche: {{names}}`,noneFound:`Nessun sensore di temperatura, umidità o batteria corrispondente trovato per questa posizione.`,onlyThisOne:`Solo questo`},options:{buttonLabel:`Opzioni sensori`,title:`Opzioni sensori di posizione`,description:`Questi valori vengono usati quando un sensore di temperatura, umidità o batteria viene collegato automaticamente insieme al primo sensore di una posizione.`,generalSettings:`Impostazioni generali`,pollInterval:`Intervallo di aggiornamento (secondi)`,pollIntervalHint:`Con quale frequenza Bambuddy interroga Home Assistant e aggiorna i valori dei sensori a schermo. Minimo 60 secondi.`,colorizeValues:`Colora i valori dei sensori in base alle relative soglie di allarme`,aboveColor:`Colore sopra la soglia`,belowColor:`Colore sotto la soglia`,optimalColor:`Colore per il valore ottimale`,colors:{red:`Rosso`,orange:`Arancione`,yellow:`Giallo`,green:`Verde`,blue:`Blu`,purple:`Viola`,pink:`Rosa`},saved:`Opzioni salvate`,saveFailed:`Impossibile salvare le opzioni`,reset:`Ripristina`,resetConfirm:{title:`Reimpostare tutti i sensori di posizione esistenti?`,message:`Questo sovrascrive le soglie di allarme, le notifiche e la visibilità sulla scheda di tutti i sensori di temperatura, umidità e batteria di posizione esistenti con i valori configurati sopra, e ripristina il nome di ciascun sensore al suo nome descrittivo di Home Assistant: i sensori della stampante non sono interessati. Questa azione non può essere annullata. A seconda del numero di sensori, questa operazione potrebbe richiedere un momento.`},resetDone:`Applicato a {{count}} sensori di posizione`,resetFailed:`Impossibile reimpostare i sensori di posizione`},deleteAllConfirm:{title:`Eliminare tutti i sensori?`,message:`Questo rimuove tutti i {{count}} sensori collegati a "{{location}}". Questa azione non può essere annullata.`},currentlyBound:`Attualmente collegato: {{entity}}`,error:{locationRequired:`Scegli una posizione di archiviazione`},toast:{created:`Sensore aggiunto`,updated:`Sensore salvato`,deleted:`Sensore rimosso`}},smartPlugs:{offline:`Offline`,admin:`Amministrazione`,openPlugAdminPage:`Apri pagina amministrazione presa`,deleteSmartPlug:`Elimina presa smart`,turnOnSmartPlug:`Accendi presa smart`,turnOffSmartPlug:`Spegni presa smart`,turnOn:`Accendi`,turnOff:`Spegni`,addSmartPlug:{scanningNetwork:`Scansione rete...`,chooseEntity:`Scegli un'entità...`,connectionFailed:`Connessione fallita`,searchEntities:`Cerca entità...`,searchPowerSensors:`Cerca sensori di potenza...`,searchEnergySensors:`Cerca sensori di energia...`,placeholders:{plugName:`Presa soggiorno`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Stesso del topic potenza, o diverso`}},linkedTo:`Collegato a:`,monitorOnly:`Solo monitoraggio`,alerts:`Avvisi`,scheduleOn:`Alle {{time}}`,scheduleOff:`Spento {{time}}`,on:`On`,off:`Spento`,power:`Potenza`,kwhToday:`kWh Oggi`,settings:`Impostazioni`,automationSettings:`Impostazioni automazione`,showInSwitchbar:`Mostra nella barra interruttori`,quickAccessSidebar:`Accesso rapido dalla barra laterale`,enabled:`Abilitato`,enableAutomation:`Abilita automazione per questa presa`,autoOn:`Auto On`,autoOnDescription:`Accendi quando inizia la stampa`,autoOff:`Auto Off`,autoOffDescription:`Spegni quando la stampa è completata (una tantum)`,autoOffPersistent:`Mantieni attivo`,autoOffPersistentDescription:`Resta attivo tra le stampe invece di una tantum`,controlsPrinterPower:`Alimenta la stampante`,controlsPrinterPowerDescription:`Disattiva se questa presa alimenta solo un accessorio (ventola del filtro, luci). Altrimenti spegnerla segna la stampante come offline.`,autoOffAfterDrying:`Spegni dopo asciugatura`,autoOffAfterDryingDescription:`Spegni al termine dell'asciugatura AMS`,delayAfterDryingMinutes:`Ritardo dopo asciugatura (minuti)`,turnOffDelayMode:`Modalità ritardo spegnimento`,time:`Tempo`,temp:`Temp.`,delayMinutes:`Ritardo (minuti)`,tempThreshold:`Soglia temperatura (°C)`,tempThresholdDescription:`Si spegne quando l'ugello si raffredda sotto questa temperatura`,edit:`Modifica`,deleteConfirm:`Sei sicuro di voler eliminare "{{name}}"? Questa azione non può essere annullata.`,turnOnConfirm:`Sei sicuro di voler accendere "{{name}}"?`,turnOffConfirm:`Sei sicuro di voler spegnere "{{name}}"? Questo interromperà l'alimentazione del dispositivo collegato.`,failedToTurn:`Impossibile {{action}} "{{name}}"`,unknown:`Sconosciuto`,addTitle:`Aggiungi presa smart`,editTitle:`Modifica presa smart`,stopScanning:`Interrompi scansione`,discoverTasmota:`Scopri dispositivi Tasmota`,foundDevices:`{{count}} dispositivo/i trovato/i - clicca per selezionare:`,noDevicesFound:`Nessun dispositivo Tasmota trovato nella rete`,haNotConfigured:`Home Assistant non è configurato. Configuralo in`,haSettingsPath:`Impostazioni → Rete → Home Assistant`,selectEntity:`Seleziona entità *`,ipAddress:`Indirizzo IP *`,nameLabel:`Nome *`,username:`Nome utente`,password:`Password`,authHint:`Lascia vuoto se il tuo dispositivo Tasmota non richiede autenticazione`,linkToPrinter:`Collega alla stampante`,noPrinter:`Nessuna stampante (solo controllo manuale)`,linkingDescription:`Il collegamento abilita accensione/spegnimento automatico all'inizio/fine stampa`,powerAlerts:`Avvisi potenza`,alertAbove:`Avviso se sopra (W)`,alertBelow:`Avviso se sotto (W)`,alertDescription:`Ricevi notifiche quando il consumo supera queste soglie. Lascia vuoto per disabilitare quella direzione.`,dailySchedule:`Programma giornaliero`,turnOnAt:`Accendi alle`,turnOffAt:`Spegni alle`,scheduleDescription:`Accendi/spegni automaticamente la presa a questi orari ogni giorno. Lascia vuoto per saltare quell'azione.`,showOnPrinterCard:`Mostra sulla scheda stampante`,displayOnPrinterCard:`Mostra pulsante sulla scheda stampante`,connectedResult:`Connesso!`,deviceLabel:`Dispositivo: {{name}} - `,stateLabel:`Stato: {{state}}`,test:`Test`,delete:`Elimina`,save:`Salva`,add:`Aggiungi`,cancel:`Annulla`,failedToStartScan:`Impossibile avviare la scansione`,nameRequired:`Il nome è obbligatorio`,entityRequired:`L'entità è obbligatoria per le prese Home Assistant`,mqttTopicRequired:`Almeno un topic MQTT deve essere configurato per potenza, energia o monitoraggio stato`,loadingEntities:`Caricamento entità...`,loading:`Caricamento...`,failedToLoadEntities:`Impossibile caricare le entità: {{error}}`,noEntitiesMatching:`Nessuna entità trovata corrispondente a "{{search}}"`,noEntitiesAvailable:`Nessuna entità disponibile`,searchingEntities:`Ricerca in tutte le entità ({{count}} trovate)`,showingEntities:`Mostrando switch, light, input_boolean ({{count}} disponibili)`,energyMonitoringOptional:`Monitoraggio energia (Opzionale)`,energyMonitoringHint:`Cerca e seleziona i sensori che forniscono dati di potenza/energia.`,powerSensorW:`Sensore potenza (W)`,energyTodayKwh:`Energia oggi (kWh)`,totalEnergyKwh:`Energia totale (kWh)`,noMatchingSensors:`Nessun sensore corrispondente`,none:`Nessuno`,mqttNotConfigured:`Broker MQTT non configurato. Imposta l'indirizzo del broker in`,mqttSettingsPath:`Impostazioni → Rete → Pubblicazione MQTT`,mqttNotConfiguredSuffix:`(non è necessario abilitare la pubblicazione, basta inserire i dettagli del broker).`,mqttMonitorOnlyDescription:`Le prese MQTT ricevono dati di potenza/energia tramite sottoscrizione MQTT. Il controllo on/off non è disponibile - usa il tuo broker MQTT o sistema domotico.`,powerMonitoring:`Monitoraggio potenza`,energyMonitoring:`Monitoraggio energia`,stateMonitoring:`Monitoraggio stato`,optional:`opzionale`,topic:`Argomento`,jsonPath:`Percorso JSON`,multiplier:`Moltiplicatore`,onValue:`Valore ON`,mqttPowerHint:`Il percorso JSON estrae il valore dal payload JSON (es. "power_l1"). Lascia vuoto se il topic pubblica valori numerici grezzi.
 Usa moltiplicatore 0.001 per mW→W, 1000 per kW→W.`,mqttEnergyHint:`Il percorso JSON estrae il valore dal payload JSON. Lascia vuoto per valori grezzi.
 Usa moltiplicatore 0.001 per Wh→kWh, 1000 per MWh→kWh.`,mqttStateHint:`Il percorso JSON estrae il valore dal payload JSON. Lascia vuoto per valori grezzi.
-Valore ON: la stringa esatta che significa "ON". Lascia vuoto per rilevamento auto (ON, true, 1).`,restControl:`Controllo`,restOnUrl:`URL accensione`,restOffUrl:`URL spegnimento`,restOnBody:`Corpo richiesta ON`,restOffBody:`Corpo richiesta OFF`,restMethod:`Metodo HTTP`,restHeaders:`Custom Headers (JSON)`,restStatusUrl:`URL stato`,restStatusPath:`Percorso JSON stato`,restStatusOnValue:`Valore ON`,restPowerUrl:`URL potenza`,restPowerPath:`Percorso JSON potenza`,restPowerMultiplier:`Moltiplicatore potenza`,restEnergyUrl:`URL energia`,restEnergyPath:`Percorso JSON energia (oggi)`,restEnergyTotalPath:`Percorso JSON energia (contatore totale)`,restEnergyTotalMultiplier:`Moltiplicatore contatore totale`,restEnergyTotalPathHint:`es. aenergy.total`,restEnergyTotalHint:`Molte prese — tutti gli Shelly fra queste — riportano solo un contatore cumulativo che non si azzera mai. Va qui, non nel campo sopra: letto come consumo di oggi non tornerebbe mai a zero a mezzanotte, e Ieri e Totale resterebbero vuoti. Bambuddy ricava Oggi e Ieri da questo valore, il che richiede uno o due giorni di letture. Uno Shelly riporta wattora, quindi usa un moltiplicatore di 0.001.`,restEnergyMultiplier:`Moltiplicatore energia`,restUrlRequired:`È richiesto almeno un URL (ON o OFF) per le prese REST`,restHeadersHint:`es. {"Authorization": "Bearer your-token"}`,restBodyHint:`es. ON, {"state": "on"}`,restStatusHint:`URL per recuperare lo stato attuale`,restPathHint:`es. state o data.power.status`,restPowerUrlHint:`URL separato per i dati di potenza (usa l'URL di stato se vuoto)`,restEnergyUrlHint:`URL separato per i dati di energia (usa l'URL di stato se vuoto)`,restEnergyHint:`Ogni valore può usare il proprio URL o ricadere sull'URL di stato. Usa i moltiplicatori per la conversione delle unità (es. 0.001 per convertire Wh in kWh).`,testConnection:`Testa connessione`,connectionSuccess:`Connessione riuscita`,noSwitchesInSwitchbar:`Nessun interruttore nella barra`,enableSwitchbarHint:`Abilita "Mostra nella barra interruttori" in Impostazioni > Smart Plugs`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`E-mail`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`Notifiche email tramite SMTP`,telegram:`Notifiche tramite bot Telegram`,discord:`Invia a un canale Discord tramite webhook`,ntfy:`Notifiche push gratuite e self-hostabili`,pushover:`Notifiche push semplici e affidabili`,callmebot:`Notifiche WhatsApp gratuite tramite CallMeBot`,webhook:`POST HTTP generico verso qualsiasi URL`,homeassistant:`Notifiche persistenti nella dashboard di Home Assistant`,bark:`Notifiche push iOS tramite Bark (auto-ospitabile)`},lastSuccess:`Ultimo: {{date}}`,error:`Errore`,printer:`Stampante:`,allPrinters:`Tutte le stampanti`,sendTestNotification:`Invia notifica di prova`,eventSettings:`Impostazioni eventi`,enabled:`Abilitato`,sendFromProvider:`Invia notifiche da questo provider`,printEvents:`Eventi di stampa`,printerStatus:`Stato stampante`,amsAlarms:`Allarmi AMS`,amsHtAlarms:`Allarmi AMS-HT`,printQueue:`Coda di stampa`,start:`Avvio`,plateCheck:`Controllo piatto`,complete:`Completato`,failed:`Fallito`,stopped:`Interrotto`,progress:`Avanzamento`,offline:`Offline`,lowFilament:`Filamento scarso`,maintenance:`Manutenzione`,amsHumidity:`Umidità AMS`,amsTemp:`Temp AMS`,amsDryingSuspended:`Asciugatura sospesa`,amsHtHumidity:`Umidità AMS-HT`,amsHtTemp:`Temp AMS-HT`,bedCooled:`Piatto raffreddato`,firstLayer:`Primo strato`,quiet:`Silenzioso`,digest:`Riepilogo {{time}}`,printStarted:`Stampa avviata`,plateNotEmpty:`Piatto non vuoto`,plateNotEmptyDescription:`Oggetti rilevati prima della stampa`,plateClearRequired:`Conferma piatto libero`,plateClearRequiredDescription:`Stampa finita, la coda attende conferma`,plateClear:`Piatto libero`,printCompleted:`Stampa completata`,bedCooledLabel:`Piatto raffreddato`,bedCooledDescription:`Piatto raffreddato sotto la soglia dopo la stampa`,firstLayerCompleteLabel:`Primo strato completato`,firstLayerCompleteDescription:`Notifica con foto al termine del primo strato`,missingSpoolAssignmentLabel:`Assegnazione bobina mancante`,billingChargeFailedLabel:`Errore di addebito`,billingChargeFailedDescription:`Notifica quando non è possibile registrare i costi di stampa`,missingSpoolAssignmentDescription:`Notifica quando una stampa parte e i vassoi richiesti non hanno una bobina assegnata`,printFailed:`Stampa fallita`,printStopped:`Stampa interrotta`,progressMilestones:`Traguardi di avanzamento`,progressMilestonesDescription:`Notifica al 25%, 50%, 75%`,printerOffline:`Stampante offline`,printerError:`Errore stampante`,aiFailureDetection:`Rilevamento guasti IA`,aiFailureDetectionDescription:`Notifica quando l'IA di Obico rileva un possibile guasto di stampa`,lowFilamentLabel:`Filamento scarso`,maintenanceDue:`Manutenzione necessaria`,maintenanceDueDescription:`Notifica quando è necessaria la manutenzione`,amsHumidityHigh:`Umidità AMS elevata`,amsHumidityHighDescription:`L'umidità dell'AMS standard supera la soglia`,amsTemperatureHigh:`Temperatura AMS elevata`,amsTemperatureHighDescription:`La temperatura dell'AMS standard supera la soglia`,amsDryingSuspendedTitle:`Asciugatura automatica sospesa`,amsDryingSuspendedDescription:`L'asciugatura automatica ha rinunciato a un'unità AMS perché l'umidità non è mai scesa sotto la soglia`,amsHtHumidityHigh:`Umidità AMS-HT elevata`,amsHtHumidityHighDescription:`L'umidità dell'AMS-HT supera la soglia`,amsHtTemperatureHigh:`Temperatura AMS-HT elevata`,amsHtTemperatureHighDescription:`La temperatura dell'AMS-HT supera la soglia`,inventoryAlerts:`Avvisi di inventario`,stockReorderAlert:`Avviso di riordino`,stockReorderAlertDescription:`Il SKU ha raggiunto il punto di riordino`,stockBreakAlert:`Avviso di esaurimento scorte`,stockBreakAlertDescription:`Le scorte si esauriranno prima dell'arrivo del rifornimento`,jobAdded:`Lavoro aggiunto`,jobAddedDescription:`Lavoro aggiunto alla coda`,jobAssigned:`Lavoro assegnato`,jobAssignedDescription:`Lavoro basato su modello assegnato alla stampante`,jobStarted:`Lavoro avviato`,jobStartedDescription:`Lavoro in coda avviato per la stampa`,jobWaiting:`Lavoro in attesa`,jobWaitingDescription:`Lavoro in attesa di filamento o stampante`,jobSkipped:`Lavoro saltato`,jobSkippedDescription:`Lavoro saltato (precedente fallito)`,jobFailed:`Lavoro fallito`,jobFailedDescription:`Avvio del lavoro fallito`,queueComplete:`Coda completata`,queueCompleteDescription:`Tutti i lavori in coda completati`,quietHours:`Ore silenziose`,noNotificationsDuring:`Nessuna notifica durante queste ore`,editProviderToChangeQuietHours:`Modifica il provider per cambiare le ore silenziose`,dailyDigest:`Riepilogo giornaliero`,batchNotifications:`Raggruppa le notifiche in un unico riepilogo giornaliero`,sendAt:`Invia alle {{time}}`,editProviderToChangeDigestTime:`Modifica il provider per cambiare l'orario del riepilogo`,edit:`Modifica`,deleteProvider:`Elimina provider di notifica`,deleteConfirm:`Sei sicuro di voler eliminare "{{name}}"? Questa azione non può essere annullata.`,delete:`Elimina`,addTitle:`Aggiungi provider di notifica`,editTitle:`Modifica provider di notifica`,nameLabel:`Nome *`,namePlaceholder:`Le mie notifiche`,providerTypeLabel:`Tipo di provider *`,configuration:`Configurazione`,testConfiguration:`Testa configurazione`,printerFilter:`Filtro stampante`,onlyFromPrinter:`Invia notifiche solo per eventi da questa stampante`,quietHoursDnd:`Ore silenziose (Non disturbare)`,quietStart:`Inizio`,quietEnd:`Fine`,dailyDigestLabel:`Riepilogo giornaliero`,sendDigestAt:`Invia riepilogo alle`,digestCollected:`Gli eventi verranno raccolti e inviati come riepilogo unico a quest'ora`,notificationEvents:`Eventi di notifica`,progressPercent:`(25%, 50%, 75%)`,bedCooledAfterPrint:`(dopo il completamento della stampa)`,haSensorAlert:`Avviso sensore stampante`,haSensorAlertDescription:`(un sensore Home Assistant collegato richiede attenzione)`,locationHaSensorAlert:`Avviso sensore di posizione`,locationHaSensorAlertDescription:`(un sensore Home Assistant collegato a una posizione di archiviazione richiede attenzione)`,eventPriority:{sectionTitle:`Priorità ntfy`,helpNtfy:`Scegli una priorità per ogni evento abilitato. ntfy le usa per intensificare gli avvisi (suono, visibilità, comportamento push). I livelli non impostati qui usano l'impostazione predefinita del server ntfy.`,min:`Min.`,low:`Bassa`,default:`Predefinita`,high:`Alta`,urgent:`Urgente`},cancel:`Annulla`,save:`Salva`,add:`Aggiungi`,nameRequired:`Il nome è obbligatorio`,fieldRequired:`{{field}} è obbligatorio`,haDataInvalid:`Il campo Data deve essere un oggetto JSON valido, ad es. {"priority": "high", "ttl": 0}`,phoneNumber:`Numero di telefono`,apiKey:`Chiave API`,serverUrl:`URL del server`,topic:`Argomento`,authToken:`Token di autenticazione`,userKey:`Chiave utente`,appToken:`Token applicazione`,priority:`Priorità`,pushoverRetry:`Ripetizione emergenza (s)`,pushoverExpire:`Scadenza emergenza (s)`,botToken:`Token del bot`,chatId:`ID chat`,telegramThreadId:`ID argomento forum`,telegramThreadIdHelp:`Opzionale. Invia in un singolo argomento di un gruppo forum: l'ultimo numero nel link dell'argomento (t.me/c/.../25). Lascia vuoto per l'argomento Generale.`,telegramThreadIdInvalid:`L'ID argomento forum deve essere un numero.`,smtpServer:`Server SMTP`,smtpPort:`Porta SMTP`,security:`Sicurezza`,authentication:`Autenticazione`,username:`Nome utente`,password:`Password`,fromEmail:`Email mittente`,toEmail:`Email destinatario`,webhookUrl:`URL webhook`,payloadFormat:`Formato payload`,authorization:`Autorizzazione`,titleFieldName:`Nome campo titolo`,messageFieldName:`Nome campo messaggio`,editTemplate:`Modifica modello: {{name}}`,titleLabel:`Titolo`,bodyLabel:`Corpo`,titlePlaceholder:`Titolo della notifica...`,bodyPlaceholder:`Corpo della notifica...`,availableVariables:`Variabili disponibili`,clickToInsert:`Clicca per inserire alla posizione del cursore nel corpo`,livePreview:`Anteprima live`,hide:`Nascondi`,show:`Mostra`,loadingPreview:`Caricamento anteprima...`,enterTemplateContent:`Inserisci il contenuto del modello per vedere l'anteprima`,titlePreview:`Titolo:`,bodyPreview:`Corpo:`,resetToDefault:`Ripristina predefinito`,titleRequired:`Il titolo è obbligatorio`,bodyRequired:`Il corpo è obbligatorio`,notificationLog:`Registro notifiche`,showFailedOnly:`Solo fallite`,last24Hours:`Ultime 24 ore`,last7Days:`Ultimi 7 giorni`,last30Days:`Ultimi 30 giorni`,last90Days:`Ultimi 90 giorni`,justNow:`Proprio ora`,noFailedNotifications:`Nessuna notifica fallita`,noNotificationsLogged:`Nessuna notifica registrata`,unknownProvider:`Provider sconosciuto`,logTitle:`Titolo`,logMessage:`Messaggio`,logError:`Errore`,logProvider:`Provider: {{type}}`,logTime:`Ora: {{time}}`,refresh:`Aggiorna`,clearOld:`Cancella vecchie`,statsSummary:`Ultimi {{days}} giorni:`,statsNotifications:`notifiche`,statsSent:`{{count}} inviate`,statsFailed:`{{count}} fallite`,eventTypes:{print_start:`Stampa avviata`,print_complete:`Stampa completata`,print_failed:`Stampa fallita`,print_stopped:`Stampa interrotta`,print_progress:`Avanzamento`,printer_offline:`Stampante offline`,printer_error:`Errore stampante`,filament_low:`Filamento scarso`,maintenance_due:`Manutenzione necessaria`,test:`Prova`},userEmail:{title:`Notifiche`,emailNotifications:`Notifiche via e-mail`,emailNotificationsDesc:`Ricevi notifiche via e-mail per i tuoi lavori di stampa. Le e-mail vengono inviate tramite le impostazioni SMTP configurate nell'autenticazione avanzata.`,sendingTo:`Le notifiche verranno inviate a`,noEmailWarning:`Il tuo account non ha un indirizzo e-mail. Contatta un amministratore per aggiungerne uno.`,printJobNotifications:`Notifiche lavori di stampa`,printJobNotificationsDesc:`Scegli quali eventi attivano le notifiche e-mail per i lavori di stampa che invii.`,printJobStarts:`Inizio lavoro di stampa`,printJobStartsDesc:`Ricevi una notifica quando il tuo lavoro di stampa inizia.`,printJobFinishes:`Fine lavoro di stampa`,printJobFinishesDesc:`Ricevi una notifica quando il tuo lavoro di stampa si completa correttamente.`,printErrors:`Errori di stampa`,printErrorsDesc:`Ricevi una notifica quando il tuo lavoro di stampa fallisce o incontra un errore.`,printJobStops:`Lavoro di stampa interrotto`,printJobStopsDesc:`Ricevi una notifica quando il tuo lavoro di stampa viene annullato o interrotto.`,saveSuccess:`Preferenze di notifica salvate.`,saveError:`Impossibile salvare le preferenze di notifica.`}},richTextEditor:{bold:`Grassetto`,italic:`Corsivo`,underline:`Sottolineato`,bulletList:`Elenco puntato`,numberedList:`Elenco numerato`,alignLeft:`Allinea a sinistra`,alignCenter:`Allinea al centro`,alignRight:`Allinea a destra`,addLink:`Aggiungi link`,removeLink:`Rimuovi link`},externalLinks:{title:`Link della barra laterale`,sidebarLayout:`Barra laterale`,sidebarLayoutDescription:`Mostra o nascondi le pagine integrate, aggiungi link esterni e trascina gli elementi per riordinare la navigazione laterale.`,systemPages:`Pagine Bambuddy`,externalLinks:`Link esterni`,visibleInSidebar:`Visibile nella barra laterale`,hiddenFromSidebar:`Nascosto nella barra laterale`,requiredInSidebar:`Obbligatorio nella barra laterale`,hidePage:`Nascondi pagina`,showPage:`Mostra pagina`,settingsCannotBeHidden:`Le impostazioni non possono essere nascoste`,noLinksConfigured:`Nessun link esterno configurato`,deleteLink:`Elimina link`,removeCustomIcon:`Rimuovi icona personalizzata`,openInNewTab:`Apri in nuova scheda`,placeholders:{linkName:`Il mio link`}},keyboardShortcuts:{title:`Scorciatoie da tastiera`,navigation:`Navigazione`,archivesSection:`Archivi`,kProfilesSection:`Profili K`,generalSection:`Generale`,shortcuts:{goToPrinters:`Vai a Stampanti`,goToArchives:`Vai ad Archivi`,goToQueue:`Vai a Coda`,goToStats:`Vai a Statistiche`,goToProfiles:`Vai a Profili cloud`,goToSettings:`Vai a Impostazioni`,focusSearch:`Vai alla ricerca`,openUploadModal:`Apri finestra di caricamento`,clearSelection:`Cancella selezione / deseleziona input`,contextMenu:`Menu contestuale sulle schede`,refreshProfiles:`Aggiorna profili`,newProfile:`Nuovo profilo`,exitSelectionMode:`Esci dalla modalità selezione`,showHelp:`Mostra questa guida`},footer:`Premi Esc o clicca fuori per chiudere`},notificationLog:{title:`Registro notifiche`,events:{printStarted:`Stampa avviata`,printComplete:`Stampa completata`,printFailed:`Stampa fallita`,printStopped:`Stampa interrotta`,progress:`Avanzamento`,printerOffline:`Stampante offline`,printerError:`Errore stampante`,lowFilament:`Filamento in esaurimento`,maintenanceDue:`Manutenzione in scadenza`,test:`Test`},timeAgo:{justNow:`Adesso`,minutesAgo:`{{minutes}} min fa`,hoursAgo:`{{hours}} ore fa`}},restoreBackup:{title:`Ripristina backup`,restoring:`Ripristino...`,restoreComplete:`Ripristino completato`,restoreFailed:`Ripristino fallito`,importSettings:`Importa impostazioni da un file di backup`,pleaseWait:`Attendere il ripristino dei dati`,clickToSelect:`Clicca per selezionare il file di backup (.json o .zip)`,howDuplicateHandling:`Come funziona la gestione dei duplicati:`,categories:{printers:`Stampanti`,smartPlugs:`Prese smart`,notificationProviders:`Provider di notifica`,filaments:`Filamenti`,archives:`Archivi`,pendingUploads:`Caricamenti in sospeso`,settingsTemplates:`Impostazioni e modelli`},matchingInfo:{printers:`abbinati per numero di serie`,smartPlugs:`abbinati per indirizzo IP`,notificationProviders:`abbinati per nome`,filaments:`abbinati per nome + tipo + marca`,archives:`abbinati per hash del contenuto`,pendingUploads:`abbinati per nome file`,settingsTemplates:`sempre sovrascritti`},replaceExisting:`Sostituisci dati esistenti`,keepExisting:`Mantieni dati esistenti`,replaceDescription:`Sovrascrivi gli elementi già esistenti con i dati del backup`,keepDescription:`Ripristina solo gli elementi che non esistono già`,caution:`Attenzione:`,cautionText:`La sovrascrittura sostituirà le configurazioni attuali con i dati del backup. I codici di accesso delle stampanti non vengono mai sovrascritti per sicurezza.`,itemsRestored:`Elementi ripristinati`,itemsSkipped:`Elementi saltati`,restored:`Ripristinati`,skipped:`Saltati (già esistenti)`,filesLabel:`File (3MF, miniature, ecc.)`,newApiKeysGenerated:`Nuove chiavi API generate`,newApiKeysWarning:`Queste chiavi vengono mostrate una sola volta. Copiale adesso!`,processingBackup:`Elaborazione file di backup...`,noDataFound:`Nessun dato trovato da ripristinare nel file di backup.`,failedToRestore:`Impossibile ripristinare il backup. Verificare il formato del file.`},backupExport:{title:`Esporta backup`,selectData:`Seleziona i dati da includere`,selectAll:`Seleziona tutto`,selectNone:`Deseleziona tutto`,categoryDescriptions:{settings:`Lingua, tema, preferenze di aggiornamento`,notifications:`ntfy, Pushover, Discord, ecc.`,templates:`Modelli di messaggi personalizzati`,smartPlugs:`Configurazioni prese Tasmota`,externalLinks:`Link della barra laterale a servizi esterni`,printers:`Info stampanti (codici di accesso esclusi)`,plateDetection:`Immagini di riferimento piatto vuoto`,filaments:`Tipi di filamento e costi`,maintenance:`Programmi di manutenzione personalizzati`,archives:`Tutti i dati di stampa + file (3MF, miniature, foto)`,projects:`Progetti, elementi BOM e allegati`,pendingUploads:`Caricamenti della stampante virtuale in attesa di revisione`,apiKeys:`Chiavi API webhook (nuove chiavi generate all'importazione)`},requiresPrinters:`Richiede la selezione di Stampanti`,zipFileWarning:`Verrà creato un file ZIP.`,zipFileDescription:`Include tutti i file 3MF, miniature, timelapse e foto. Potrebbe richiedere tempo e produrre un file di grandi dimensioni.`,includeAccessCodes:`Includi codici di accesso`,includeAccessCodesDescription:`Per il trasferimento su un'altra macchina`,includeAccessCodesWarning:`I codici di accesso saranno inclusi in testo semplice. Mantieni sicuro questo file di backup!`,categoriesSelected:`{{selectedCount}} categorie selezionate`},pendingUploads:{placeholders:{notes:`Aggiungi note su questa stampa...`},discardUpload:`Scarta caricamento`,archiveAllUploads:`Archivia tutti i caricamenti`,discardAllUploads:`Scarta tutti i caricamenti`,archive:`Archivia`,timeAgo:{justNow:`Adesso`,minutesAgo:`{{minutes}} min fa`,hoursAgo:`{{hours}} ore fa`,daysAgo:`{{days}} giorni fa`}},apiBrowser:{placeholders:{requestBody:`Corpo della richiesta JSON...`,searchEndpoints:`Cerca endpoint...`}},configureAmsSlot:{title:`Configura Slot AMS`,slotConfigured:`Slot configurato!`,configuringSlot:`Configurazione slot:`,slotLabel:`{{ams}} – Slot {{slot}}`,searchPresets:`Cerca preset...`,colorPlaceholder:`Nome colore o hex (es. marrone, FF8800)`,clearCustomColor:`Cancella colore personalizzato`,noCloudPresets:`Nessun preset cloud. Accedi a Bambu Cloud per sincronizzare.`,noPresetsAvailable:`Nessun preset disponibile. Accedi a Bambu Cloud o importa profili locali.`,noMatchingPresets:`Nessun preset corrispondente trovato.`,custom:`Personalizzato`,builtin:`Integrato`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Impostazioni inviate alla stampante`,filamentProfile:`Profilo filamento`,kProfileLabel:`Profilo K (Pressure Advance)`,filteringFor:`Filtrando per: {{material}}`,noKProfile:`Nessun profilo K (usa predefinito 0.020)`,noMatchingKProfiles:`Nessun profilo K corrispondente. Verrà usato K=0.020 predefinito.`,otherKProfiles:`Altri profili K su questa stampante`,selectFilamentFirst:`Seleziona prima un profilo filamento`,kFromCalibration:`K={{value}} dalla calibrazione stampante`,customColorLabel:`Colore personalizzato (opzionale)`,presetColors:`Colori {{name}}:`,showLessColors:`Mostra meno colori`,showMoreColors:`Mostra più colori`,clear:`Cancella`,hexLabel:`Hex – #{{hex}}`,resetting:`Ripristino...`,resetSlot:`Ripristina slot`,cancel:`Annulla`,configuring:`Configurazione...`,configureSlot:`Configura slot`},githubBackup:{title:`Backup Git`,history:`Cronologia`,downloadBackup:`Scarica backup`,restoreBackup:`Ripristina backup`,noBackupsYet:`Nessun backup ancora`},emailSettings:{placeholders:{fromName:`Bambuddy`}},tagManagement:{searchTags:`Cerca tag...`,renameTag:`Rinomina tag`,deleteTag:`Elimina tag`},notificationTemplates:{placeholders:{title:`Titolo notifica...`,body:`Corpo notifica...`}},batchTag:{placeholders:{newTag:`Inserisci nuovo tag...`}},photoGallery:{deletePhoto:`Elimina foto`},filamentHoverCard:{copySpoolUuid:`Copia UUID bobina`},kProfilesView:{hasNote:`Ha una nota`,copyProfile:`Copia profilo`},layout:{openMenu:`Apri menu`,noPermissionSystemInfo:`Non hai il permesso di visualizzare le informazioni di sistema`},dashboard:{dragToReorder:`Trascina per riordinare`,hideWidget:`Nascondi widget`},notificationProviderCard:{deleteNotificationProvider:`Elimina provider di notifica`},fileManagerModal:{closeFileManager:`Chiudi gestore file`,sortFiles:`Ordina file`,goToParentFolder:`Vai alla cartella superiore`,threeView:`Vista 3D`},embeddedCameraViewer:{refreshStream:`Aggiorna stream`,close:`Chiudi`,zoomOut:`Rimpicciolisci`,resetZoom:`Reimposta zoom`,zoomIn:`Ingrandisci`,dragToResize:`Trascina per ridimensionare`},timelapseViewer:{skipBack5s:`Indietro 5s`,skipForward5s:`Avanti 5s`},notificationProviders:{descriptions:{email:`Notifiche email via SMTP`,telegram:`Notifiche tramite bot Telegram`,discord:`Invia a canale Discord tramite webhook`,ntfy:`Notifiche push gratuite e self-hostabili`,pushover:`Notifiche push semplici e affidabili`,callmebot:`Notifiche WhatsApp gratuite tramite CallMeBot`,webhook:`POST HTTP generico a qualsiasi URL`}},logViewer:{searchPlaceholder:`Cerca messaggio o nome logger...`,noLogEntries:`Nessuna voce di log trovata`},switchbarPopover:{noSwitchesInSwitchbar:`Nessun interruttore nella barra`},projectPageModal:{placeholders:{title:`Titolo`,designer:`Designer`,license:`Licenza`,description:`Inserisci descrizione...`,profileTitle:`Titolo profilo`,profileDescription:`Descrizione profilo...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`In attesa`,justNow:`Proprio ora`,now:`Ora`,minsAgo:`{{count}}m fa`,inMins:`tra {{count}}m`,hoursAgo:`{{count}}h fa`,inHours:`tra {{count}}h`,daysAgo:`{{count}}g fa`,inDays:`tra {{count}}g`},spoolbuddy:{nav:{dashboard:`Dashboard`,ams:`AMS`,inventory:`Inventario`,writeTag:`Scrivi`,settings:`Impostazioni`},status:{nfcReady:`NFC pronto`,nfcOff:`NFC spento`,offline:`Offline`,online:`Online`,noPrinters:`Nessuna stampante`,deviceOffline:`Dispositivo offline`,waitingConnection:`In attesa della connessione...`,systemReady:`Sistema pronto`,status:`Stato`},dashboard:{readyToScan:`Pronto per la scansione`,idleMessage:`Posiziona una bobina sulla bilancia per identificarla`,nfcHint:`Il tag NFC verrà letto automaticamente`,device:`Dispositivo`,syncWeight:`Sincronizza peso`,weightSynced:`Sincronizzato!`,unknownTag:`Tag sconosciuto`,newTag:`Nuovo tag rilevato`,onScale:`sulla bilancia`,linkSpool:`Collega a bobina`,linkTagTitle:`Collega tag a bobina`,linkTag:`Collega tag`,selectSpool:`Seleziona una bobina da collegare a questo tag:`,noUntagged:`Nessuna bobina senza tag trovata`,tagDetected:`Tag rilevato`,noTag:`Nessun tag`,tagId:`Etichetta`,grossWeight:`Peso lordo`,spoolSize:`Dimensione bobina`,close:`Chiudi`,currentSpool:`Bobina attuale`,plateReady:`Piatto pronto: {{name}}`,plateReadyLabel:`Piatti da liberare`,plateClearAction:`Libera`,plateClearedToast:`Piatto contrassegnato come liberato`,plateClearFailed:`Impossibile contrassegnare il piatto come liberato`},modal:{spoolDetected:`Bobina rilevata`,assignToAms:`Assegna all'AMS`,syncWeight:`Sincronizza peso`,weightSynced:`Sincronizzato!`,syncing:`Sincronizzazione...`,newTagDetected:`Nuovo tag rilevato`,addToInventory:`Aggiungi all'inventario`,assignToAmsTitle:`Assegna all'AMS`,selectSlot:`Seleziona uno slot`,assign:`Assegna`,assigning:`Assegnazione...`,assignSuccess:`Assegnato!`,assignPendingInsert:`Assegnato. Lo slot verrà configurato all'inserimento della bobina.`,assignError:`Impossibile assegnare la bobina. Riprovare.`,noPrinterSelected:`Seleziona una stampante...`,noAmsDetected:`Nessun AMS rilevato su questa stampante`,slot:`Slot`},weight:{noReading:`Nessuna lettura`,stable:`Stabile`,measuring:`Misurazione...`,tare:`Tara`,calibrate:`Calibra`},spool:{remaining:`Rimanente`,material:`Materiale`,brand:`Marca`,color:`Colore`,coreWeight:`Nucleo`,labelWeight:`Etichetta`,scaleWeight:`Bilancia`,netWeight:`Netto`,lastUsed:`Ultimo utilizzo`,unknownColor:`Colore sconosciuto`},ams:{noData:`Nessun AMS rilevato`,connectAms:`Collega un AMS per vedere gli slot`,noPrinter:`Nessuna stampante selezionata`,selectPrinter:`Seleziona una stampante dalla barra superiore`,printerDisconnected:`Stampante disconnessa`,humidity:`Umidità`,level:`Livello`,active:`Attivo`,slot:`Slot`,empty:`Vuoto`},inventory:{search:`Cerca bobine...`,empty:`Nessuna bobina nell'inventario`,noResults:`Nessuna bobina corrispondente`,spools:`bobine`,addSpool:`Aggiungi bobina`},settings:{tabDevice:`Dispositivo`,tabDisplay:`Display`,tabScale:`Bilancia`,tabUpdates:`Aggiornamenti`,nfcReader:`Lettore NFC`,type:`Tipo`,connection:`Connessione`,notConnected:`N/D`,deviceInfo:`Info dispositivo`,hostname:`Host`,uptime:`Tempo di attività`,brightness:`Luminosità`,saved:`Salvato`,noBacklight:`Nessuna retroilluminazione DSI rilevata. Il controllo luminosità richiede un display DSI.`,screenBlank:`Timeout spegnimento schermo`,screenBlankDesc:`Lo schermo si spegne dopo inattività. Tocca per riattivare.`,displayNote:`La luminosità viene applicata come filtro software.`,scaleCalibration:`Calibrazione bilancia`,currentWeight:`Peso attuale`,tareOffset:`Tara`,calFactor:`Fattore`,knownWeight:`Peso noto`,calStep1:`Rimuovere tutto dalla bilancia e premere Imposta zero.`,calStep2:`Posizionare il peso noto sulla bilancia.`,setZero:`Imposta zero`,calibrateNow:`Calibra`,calibrated:`Calibrato`,tareSet:`Comando tara inviato. In attesa del dispositivo...`,tareComplete:`Tara completata!`,tareTimedOut:`Tempo scaduto per la tara — il demone SpoolBuddy è in esecuzione?`,tareFailed:`Invio comando tara fallito`,zeroSet:`Punto zero impostato. Posizionare il peso noto sulla bilancia.`,calibrationDone:`Calibrazione completata!`,calibrationFailed:`Calibrazione fallita`,lastCalibrated:`Ultima calibrazione`,stable:`Stabile`,settling:`Stabilizzazione...`,firmware:`Firmware`,scale:`Bilancia`,noDevice:`Nessun dispositivo SpoolBuddy trovato`,daemonVersion:`Versione daemon`,currentVersion:`Attuale`,versionPending:`In attesa del daemon...`,checking:`Verifica...`,checkUpdates:`Verifica aggiornamenti`,updateAvailable:`Aggiornamento disponibile`,updateInstructions:`Aggiorna via SSH: esegui lo script di installazione SpoolBuddy.`,upToDate:`Aggiornato`,includeBeta:`Includi versioni beta`,systemConfig:`Backend & autenticazione`,backendUrl:`URL backend Bambuddy`,apiToken:`Token API`,apiTokenPlaceholder:`Inserisci token API`,saveConfig:`Salva configurazione`,systemQueued:`Configurazione in coda.`,systemFieldsRequired:`L'URL del backend è obbligatorio.`,nfcDiagnostic:`Diagnostica NFC`,scaleDiagnostic:`Diagnostica bilancia`,readTagDiagnostic:`Diagnostica lettura tag`,testNfc:`Test lettore`,testScale:`Test precisione`,testReadTag:`Leggi tag`},writeTag:{tabExisting:`Bobina esistente`,tabNew:`Nuova bobina`,tabReplace:`Sostituisci tag`,searchPlaceholder:`Cerca per materiale, colore, marca...`,noUntaggedSpools:`Nessuna bobina senza tag`,noTaggedSpools:`Nessuna bobina con tag`,selectSpool:`Seleziona una bobina, poi posiziona un NTAG sul lettore`,placeTag:`Posiziona un NTAG sul lettore`,tagReady:`Tag rilevato — pronto per la scrittura`,writeTag:`Scrivi tag`,replaceTag:`Sostituisci tag`,writing:`Scrittura tag...`,waiting:`In attesa di SpoolBuddy...`,writeSuccess:`Tag scritto con successo!`,writeFailed:`Scrittura fallita`,queueFailed:`Impossibile accodare il comando di scrittura`,tryAgain:`Riprova`,cancel:`Annulla`,replaceWarning:`Il vecchio tag verrà scollegato. Il nuovo tag lo sostituirà.`,deviceOffline:`SpoolBuddy è offline`,material:`Materiale`,colorName:`Nome colore`,color:`Colore`,brand:`Marca`,weight:`Peso (g)`,createSpool:`Crea bobina`,creating:`Creazione...`,spoolCreated:`Bobina creata! Pronto per la scrittura.`,createFailed:`Impossibile creare la bobina`,incompleteDataWarning:`Tag scritto con dati Spoolman incompleti`},quickMenu:{printerPower:`Alimentazione stampante`,systemControls:`Sistema`,restartDaemon:`Riavvia daemon`,restartBrowser:`Riavvia browser`,reboot:`Riavvia`,shutdown:`Spegni`,swipeToClose:`Scorri verso il basso per chiudere`,confirmTitle:`Conferma`,confirmShutdown:`Sei sicuro di voler spegnere lo SpoolBuddy? Avrai bisogno di accesso fisico per riaccenderlo.`,confirmReboot:`Sei sicuro di voler riavviare lo SpoolBuddy?`,confirmRestartDaemon:`Riavviare il daemon SpoolBuddy? NFC e bilancia saranno temporaneamente non disponibili.`,confirmRestartBrowser:`Riavviare il browser kiosk? Lo schermo diventerà brevemente nero.`,confirm:`Conferma`,confirmPlugOn:`Accendere {{name}}?`,confirmPlugOff:`Spegnere {{name}}?`,turnOn:`Accendi`,turnOff:`Spegni`}},diagnostic:{modalTitle:`Diagnostica connessione — {{name}}`,running:`Diagnostica in corso...`,runningElapsed:`Diagnostica in corso... ({{elapsed}}s)`,waitingForReportHint:`In attesa che la stampante pubblichi un report di stato — può richiedere fino a {{max}} secondi.`,runFailed:`Impossibile eseguire la diagnostica: {{error}}`,retry:`Esegui di nuovo`,runButton:`Esegui diagnostica`,sectionTitle:`Diagnostica connessione`,sectionDescription:`Verifica perché una stampante non si connette o non stampa — raggiungibilità delle porte, modalità sviluppatore LAN, modalità di rete Docker e credenziali.`,noPrinters:`Nessuna stampante configurata.`,overall:{ok:`Nessun problema rilevato — la connessione della stampante sembra a posto.`,warnings:`La stampante dovrebbe funzionare, ma alcuni aspetti richiedono attenzione.`,problems:`Sono stati rilevati problemi che spiegano perché la stampante non si connette o non stampa.`},check:{port_mqtt:{title:`Porta di controllo (MQTT 8883)`,pass:`Raggiungibile — la stampante accetta connessioni di controllo.`,fail:`La porta 8883 non è raggiungibile. La stampante è spenta, ha un altro indirizzo IP oppure un firewall la blocca. Verifica l'IP della stampante e che nulla blocchi la porta 8883.`},port_ftps:{title:`Porta trasferimento file (FTPS 990)`,pass:`Raggiungibile — l'invio dei file di stampa funzionerà.`,warn:`La porta 990 non è raggiungibile. Il monitoraggio potrebbe ancora funzionare, ma l'invio delle stampe alla stampante fallirà. Assicurati che la porta 990 non sia bloccata.`,warn_no_tls:`La porta 990 è aperta, ma il servizio file della stampante non completa l'handshake TLS. I file di stampa, le anteprime e i timelapse non possono essere scaricati, quindi gli archivi restano vuoti. Riavvia la stampante — sbloccare la porta non serve.`},external_storage:{title:`Memorizza file inviati su archiviazione esterna (passo 4 dell'installazione)`,pass:`La stampante segnala che questa opzione è attiva — i file inviati saranno memorizzati sulla scheda SD e gli archivi avranno miniature e metadati dello slicer.`,fail:`La stampante segnala che questa opzione è disattivata. Abilita "Memorizza file inviati su archiviazione esterna" — nei firmware recenti (P2S 01.02 / Bambu Studio 2.6+) l'interruttore si trova nelle Impostazioni di stampa della stampante; nelle versioni precedenti è nella scheda Dispositivo di Bambu Studio / OrcaSlicer. Senza questa opzione, ogni stampa archiviata è priva di miniatura e di metadati dello slicer.`,skip:`Non verificato — è necessaria una connessione MQTT attiva. Negli slicer più vecchi dove questa impostazione esiste solo nello slicer, la stampante non la segnala, quindi questo controllo passa anche se l'opzione è disattivata — verifica manualmente il passo 4 dell'installazione.`,skip_unsupported_model:`Questo modello ha uno slot SD ma nessun modo per attivare l'opzione — il firmware attuale della serie P1 non mostra l'interruttore in Bambu Studio e la stampante non ha uno schermo. Non c'è nulla da correggere qui; alle stampe archiviate potrebbero mancare miniature e metadati dello slicer finché Bambu Lab non aggiungerà il supporto via firmware.`,fail_no_media:`L'opzione è attiva, ma la stampante non rileva né scheda né chiavetta nel suo slot, quindi i file inviati non hanno dove andare. Inseriscine una e stampa di nuovo — fino ad allora ogni stampa archiviata sarà priva di miniatura e metadati dello slicer.`,warn_internal_storage:`L'opzione è attiva ed è presente una memoria, ma l'ultima stampa è comunque finita nella memoria interna della stampante, che Bambuddy non può leggere. Sulla serie H2, sulla P2S e sulla X2D il pulsante «Stampa» di Bambu Studio invia sempre lì, a prescindere da questa opzione. Le stampe vengono archiviate con nome e tempi, ma senza miniatura né metadati dello slicer. Per archivi completi, avvia le stampe da Bambuddy oppure elabora in OrcaSlicer, oppure in Bambu Studio usa «Invia» con «Esterna» e avvia la stampa dopo.`,warn_internal_history:`L'opzione è attiva e la memoria è presente, ma l'ultima stampa è partita da un file già presente sulla stampante: una ristampa dal suo schermo, un avvio da Handy o un file inviato prima. Quella libreria si trova nella memoria interna, che Bambuddy non può leggere, e nessuna impostazione lo cambia, perché per quella stampa non è stato inviato nulla. Resta archiviata con nome e tempi, ma senza miniatura né metadati dello slicer. Per archivi completi, avvia le stampe da Bambuddy o inviale dallo slicer.`},port_rtsps:{title:`Porta fotocamera ({{protocol}} {{port}})`,pass:`Raggiungibile — lo streaming della fotocamera funzionerà.`,warn:`La porta {{port}} non è raggiungibile. La visualizzazione live della fotocamera non funzionerà. Questo non influisce sulla stampa.`},macos_local_network:{title:`Autorizzazione « Rete locale » di macOS`,pass:`macOS consente a Bambuddy di raggiungere la rete locale.`,warn_unsigned:`Il Python che esegue Bambuddy non ha una firma del codice, quindi macOS non ha nulla a cui associare l’autorizzazione « Rete locale » e scarta in silenzio ogni connessione alla stampante, senza errori e senza richiesta. Esegui lo script di aggiornamento di Bambuddy (install/update_macos.sh), che lo firma, poi riavvia Bambuddy. Interprete: {{executable}}`,warn_permission:`Se la stampante è accesa e raggiungibile a questo indirizzo, apri Impostazioni di Sistema > Privacy e sicurezza > Rete locale e verifica che il Python di Bambuddy sia abilitato. In caso contrario macOS scarta le connessioni locali in silenzio, e un aggiornamento di Python può lasciare indietro la vecchia autorizzazione.`},network_mode:{title:`Modalità di rete del container`,genericRuntime:`un container`,pass:`In esecuzione in {{runtime}} con rete host.`,warn:`Bambuddy è in esecuzione in {{runtime}} con rete bridge. Il rilevamento delle stampanti e la stampante virtuale richiedono la modalità di rete host — ricrea il container con rete host ("network_mode: host" in docker-compose, "--network=host" per Podman).`,skip:`Non in esecuzione in un container — non applicabile.`,skip_unknown:`Bambuddy è in esecuzione in {{runtime}}, ma non è stato possibile determinarne la modalità di rete. Se il rilevamento delle stampanti o la stampante virtuale non funzionano, ricrea il container con rete host.`,skip_system_container:`Bambuddy è in esecuzione in un container di sistema {{runtime}}, presente sulla LAN come una macchina virtuale — non applicabile.`},subnet:{title:`Sottorete`,pass:`La stampante e Bambuddy sono nella stessa sottorete.`,warn:`La stampante ({{printer_ip}}) e Bambuddy ({{host_ip}}) sono in sottoreti diverse. Potrebbero non raggiungersi a meno che non sia configurato il routing tra le sottoreti.`,skip:`Impossibile determinare la sottorete — ignorato.`},mqtt_auth:{title:`Credenziali stampante`,pass:`La stampante ha accettato la connessione.`,fail:`La stampante è raggiungibile ma Bambuddy non è connesso ad essa. Il codice di accesso o il numero di serie è molto probabilmente errato — il codice di accesso cambia ogni volta che la modalità Solo LAN o la modalità sviluppatore viene attivata/disattivata, quindi ricopialo dallo schermo della stampante. Una stampante in fase di riavvio, o che ha già raggiunto il limite di connessioni simultanee, appare allo stesso modo.`,fail_auth_rejected:`La stampante ha rifiutato le credenziali di Bambuddy. Il codice di accesso o il numero di serie è errato — il codice di accesso cambia ogni volta che la modalità Solo LAN o la modalità sviluppatore viene attivata/disattivata. Ricopialo dallo schermo della stampante e salvalo nelle impostazioni della stampante.`,skip:`Non verificato — impossibile raggiungere la stampante.`},developer_mode:{title:`Modalità sviluppatore LAN`,pass:`La modalità sviluppatore è attivata.`,fail:`La modalità sviluppatore è DISATTIVATA sulla stampante. Attivala nelle impostazioni LAN della stampante — e conferma con OK. Senza di essa le stampe non verranno avviate.`,skip:`Impossibile verificare — richiede una connessione attiva alla stampante.`},printer_publishing:{title:`La stampante pubblica lo stato`,pass:`La stampante sta pubblicando aggiornamenti di stato — AMS, filamenti e profili K saranno correttamente replicati nello slicer.`,fail:`Il broker MQTT ha accettato la connessione ma la stampante non ha pubblicato alcun report di stato. È quasi sempre un numero di serie errato o con maiuscole/minuscole sbagliate — il topic device/<serial>/report distingue tra maiuscole e minuscole. Confronta il numero di serie nelle impostazioni della stampante con quello mostrato sullo schermo del dispositivo.`,skip:`Impossibile verificare — richiede una connessione attiva alla stampante.`}}},systemHealth:{sectionTitle:`Stato del sistema`,sectionDescription:`Analizza i log recenti alla ricerca di problemi noti che di solito puoi risolvere da solo, prima che diventino un ticket di assistenza.`,rescan:`Analizza di nuovo`,clean:`Nessun problema noto trovato nelle ultime {{times}} voci di log.`,logUnavailable:`La registrazione su file è disattivata, quindi i log non possono essere analizzati. Attiva la registrazione su file per usare questo controllo.`,learnMore:`Come risolvere`,fixLabel:`Soluzione:`,occurrences:`Visto {{times}}× — ultima volta alle {{lastSeen}}`,category:{layer8:`Puoi risolverlo tu`,environment:`Ambiente`,bug:`Segnalalo, per favore`},signature:{"ftp-auth-rejected":{name:`La stampante ha rifiutato il codice di accesso`,cause:`La stampante ha rifiutato l'accesso per il trasferimento file. Il codice di accesso è errato oppure è cambiato dopo aver attivato la Modalità Sviluppatore.`,fix:`Ricopia il codice di accesso dallo schermo della stampante (impostazioni LAN) e aggiornalo nelle impostazioni della stampante in Bambuddy.`},"ftp-connection-timeout":{name:`Timeout della connessione di trasferimento file`,cause:`Bambuddy non è riuscito a raggiungere la porta di trasferimento file della stampante (FTPS 990). La porta è bloccata, oppure la stampante è spenta o in un'altra sottorete.`,fix:`Assicurati che nulla blocchi la porta 990 tra Bambuddy e la stampante e che entrambi siano sulla stessa rete.`},"ftp-ssl-error":{name:`Handshake sicuro del trasferimento file non riuscito`,cause:`Il servizio file della stampante ha risposto sulla porta 990 senza TLS. Il suo server file si è bloccato: è un guasto della stampante, non un problema di firewall o firmware.`,fix:`Riavvia la stampante. Fino ad allora non è possibile scaricare file di stampa, copertine e timelapse; la stampa in sé non è interessata.`},"bambu-cloud-captcha":{name:`Bambu Cloud richiede un CAPTCHA`,cause:`Il sistema antiabuso di Bambu sta verificando questa rete, quindi nessun accesso a Bambu Cloud può andare a buon fine. Dipende dall'indirizzo IP pubblico, non dal tuo account né da questa installazione.`,fix:`Attendi: di solito si risolve entro qualche ora e i tentativi ripetuti lo prolungano. Nel frattempo accedi con un token di accesso preso da una sessione del browser.`},"mqtt-connection-flapping":{name:`La connessione alla stampante cade di continuo`,cause:`La connessione di controllo (MQTT 8883) si disconnette e si riconnette ripetutamente, di solito per una rete debole o una porta parzialmente bloccata.`,fix:`Controlla il segnale Wi-Fi vicino alla stampante, preferisci una connessione cablata e assicurati che la porta 8883 sia raggiungibile in modo affidabile.`},"camera-connection-refused":{name:`Flusso della telecamera non raggiungibile`,cause:`Non è stato possibile raggiungere la telecamera dal vivo sulla porta RTSPS 322. La porta è bloccata, oppure la telecamera o la visione dal vivo via LAN è disattivata sulla stampante.`,fix:`Attiva la telecamera e la visione dal vivo via LAN sulla stampante e assicurati che la porta 322 non sia bloccata. Questo non influisce sulla stampa.`},"database-locked":{name:`Conflitti di scrittura nel database`,cause:`Il database SQLite presenta errori "database is locked" sotto carico, comune quando si usano più stampanti contemporaneamente.`,fix:`Passa Bambuddy a un database PostgreSQL esterno. Consulta la guida PostgreSQL nella documentazione.`}}},vpDiagnostic:{title:`Controllo configurazione — {{name}}`,runButton:`Esegui controllo configurazione`,running:`Controllo configurazione in corso...`,runFailed:`Impossibile eseguire il controllo della configurazione: {{error}}`,retry:`Esegui di nuovo`,overall:{ok:`Tutti i controlli superati — questa stampante virtuale è configurata correttamente.`,warnings:`La stampante virtuale dovrebbe funzionare, ma alcuni aspetti richiedono attenzione.`,problems:`Sono stati trovati problemi che spiegano perché lo slicer non riesce a vedere o usare questa stampante virtuale.`},check:{enabled:{title:`Stampante virtuale abilitata`,fail:`Questa stampante virtuale è spenta. Attivala per renderla rilevabile.`},running:{title:`Servizi in esecuzione`,fail:`La stampante virtuale è abilitata ma i suoi servizi non sono in esecuzione. Controlla il log di Bambuddy — di solito li ferma un conflitto di IP di binding o un errore di permessi.`},bind_interface:{title:`Interfaccia di rete di binding`,fail:`L'interfaccia di binding non è impostata o non esiste più su questo host. Scegli un'interfaccia attuale nel menu "Interfaccia di binding".`},access_code:{title:`Codice di accesso impostato`,fail:`Nessun codice di accesso impostato. Allo slicer deve essere fornito lo stesso codice di accesso di 8 caratteri impostato qui.`},target_printer:{title:`Stampante di destinazione`,fail:`Nessuna stampante di destinazione selezionata. La modalità proxy richiede una stampante reale a cui inoltrare.`,warn:`La stampante di destinazione è offline in questo momento — l'inoltro riprenderà quando si riconnetterà.`},port_ftps:{title:`Servizio di caricamento file (porta {{port}})`,fail:`Nulla è in ascolto sulla porta {{port}} dell'IP di binding, quindi lo slicer non può caricare i file. La causa abituale è un conflitto di porta su questa interfaccia.`},port_mqtt:{title:`Servizio di controllo (porta {{port}})`,fail:`Nulla è in ascolto sulla porta {{port}} dell'IP di binding, quindi lo slicer non può connettersi o mostrare lo stato.`},port_bind:{title:`Servizio di rilevamento (porta {{port}})`,fail:`Nulla è in ascolto sulla porta {{port}} dell'IP di binding, quindi l'handshake di rilevamento dello slicer fallisce.`},privileged_ports:{title:`Binding sulle porte privilegiate`,fail:`La porta {{port}} è sotto 1024 e questo servizio non è autorizzato ad associarla: per questo sopra non risulta nulla in ascolto. Aggiungi AmbientCapabilities=CAP_NET_BIND_SERVICE in /etc/systemd/system/bambuddy.service e riavvia, oppure esegui "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))". Con Docker aggiungi cap_add: [NET_BIND_SERVICE].`},certificate:{title:`Certificato TLS`,pass:`Certificato pronto. Assicurati che il certificato CA di Bambuddy (sopra) sia importato nell'archivio attendibile del tuo slicer.`,fail:`Il certificato TLS per questa stampante virtuale è mancante. Verifica che la directory dei dati di Bambuddy sia scrivibile.`}}},bugReport:{logHealthSummary:`Trovati problemi noti nei tuoi log`,logHealthIntro:`I log recenti corrispondono a problemi noti. Controlla le soluzioni qui sotto: risolverle potrebbe sistemare il problema senza una segnalazione di bug. Puoi comunque inviare una segnalazione qui sotto.`,title:`Segnala un bug`,description:`Descrizione`,descriptionPlaceholder:`Cosa è andato storto? Descrivi il problema...`,email:`Email (opzionale)`,emailPlaceholder:`tua@email.it`,emailPrivacy:`Se fornita, la tua email sarà inclusa in una sezione compressa dell'issue GitHub per permettere al manutentore di contattarti.`,screenshot:`Schermata`,uploadOrPaste:`Carica, incolla o trascina un'immagine`,dataCollectedSummary:`Quali dati sono inclusi nel report?`,dataIncluded:`Inclusi:`,dataIncludedList:`Versione app, OS, architettura, versione Python, statistiche database (solo conteggi), modelli stampante, numero ugelli, versioni firmware, stato connessione, stato integrazioni (Spoolman, MQTT, HA), impostazioni non sensibili, conteggio interfacce di rete, dettagli Docker, versioni dipendenze.`,dataNeverIncluded:`Mai inclusi:`,dataNeverIncludedList:`Nomi stampanti, numeri di serie, codici di accesso, password, indirizzi IP, indirizzi email, chiavi API, token, URL webhook, nomi host o nomi utente.`,submit:`Invia`,startLogging:`Avvia registrazione debug`,stepEnableLogging:`Registrazione debug attivata`,stepReproduce:`Riproduci il problema ora`,stepStopLogging:`Ferma & invia rapporto`,stopAndSubmit:`Ferma & Invia`,maxDuration:`Arresto automatico dopo {{minutes}} min`,stoppingLogs:`Raccolta log & invio...`,submitting:`Invio segnalazione bug...`,submittingStepConnection:`Controlli di connettività delle stampanti in corso`,submittingStepVirtualPrinters:`Controlli di configurazione delle stampanti virtuali in corso`,submittingStepLogScan:`Analisi dei log recenti per problemi noti`,submittingStepSubmit:`Invio del report a GitHub`,submitSuccess:`Segnalazione bug inviata con successo!`,submitFailed:`Impossibile inviare la segnalazione bug`,diagnosticChecking:`Verifica delle connessioni delle stampanti...`,diagnosticHealthy:`Verifica della connessione superata — nessun problema rilevato sulle tue stampanti.`,diagnosticSummary:`{{problems}} stampanti su {{total}} hanno problemi di connessione`,diagnosticIntro:`Una o più stampanti hanno un problema di connessione che potrebbe essere la causa del tuo problema. Espandi una stampante qui sotto per vedere la soluzione — risolverla potrebbe sistemare il problema senza una segnalazione di bug. Puoi comunque inviare una segnalazione qui sotto.`,thankYou:`Grazie!`,submitted:`La tua segnalazione bug è stata inviata.`,viewIssue:`Vedi issue`,closeKeepsRecording:`Puoi chiudere questo pannello mentre riproduci il problema: la registrazione continua e riaprendolo tornerai qui.`,resumeRecording:`Segnalazione in registrazione — {{elapsed}}. Fai clic per completare.`,resumeReport:`Riprendi segnalazione`,unexpectedError:`Si è verificato un errore imprevisto`},failureDetection:{title:`Rilevamento guasti con IA`,description:`Monitora le stampe tramite un'API ML Obico auto-ospitata e agisce automaticamente sui guasti rilevati.`,mlUrl:`URL API ML Obico`,mlUrlHint:`URL base del tuo container Obico ml_api auto-ospitato (es. http://192.168.1.10:3333).`,mlToken:`Token API ML (facoltativo)`,mlTokenPlaceholder:`Lascia vuoto se il server funziona senza ML_API_TOKEN`,mlTokenHint:`Deve corrispondere alla variabile di ambiente ML_API_TOKEN del tuo container Obico ml_api. Lascia vuoto se il container funziona senza token.`,test:`Prova`,testSuccess:`API ML raggiungibile e funzionante.`,testSuccessTokenUnknown:`API ML raggiungibile e funzionante. Non è stato possibile verificare il token.`,testFailed:`Impossibile raggiungere l'API ML.`,sensitivity:`Sensibilità`,sensitivityLow:`Bassa (meno falsi positivi)`,sensitivityMedium:`Media (bilanciata)`,sensitivityHigh:`Alta (rilevamento precoce, più falsi positivi)`,sensitivityHint:`Regola le soglie di confidenza che attivano avvisi e guasti.`,action:`Azione al guasto rilevato`,actionNotify:`Solo notifica`,actionPause:`Metti in pausa`,actionPauseOff:`Pausa e stacca corrente`,pollInterval:`Intervallo di controllo (secondi)`,pollIntervalHint:`Frequenza di controllo di ogni stampante durante la stampa. Minimo 5s, massimo 120s.`,externalUrlMissing:`URL esterno non impostato.`,externalUrlHint:`L'API ML recupera l'istantanea della telecamera tramite URL. Imposta l'URL esterno nelle impostazioni generali in modo che il container API ML possa raggiungere Bambuddy.`,perPrinterTitle:`Stampanti monitorate`,perPrinterHint:`Scegli quali stampanti il servizio di rilevamento deve monitorare.`,monitorAll:`Monitora tutte le stampanti connesse`,statusTitle:`Stato`,serviceRunning:`Servizio in esecuzione`,thresholds:`Soglie bassa / alta`,activePrinters:`Stampe attive`,noActivePrints:`Nessuna stampa in corso.`,historyTitle:`Rilevamenti recenti`,noHistory:`Nessun rilevamento finora.`},makerworld:{title:`MakerWorld`,description:`Incolla un URL di un modello MakerWorld per importarlo e stamparlo direttamente da Bambuddy — senza passare dall'app Bambu Handy.`,pasteUrlHeader:`Importa da MakerWorld`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… o incolla qualsiasi link MakerWorld`,resolveButton:`Risolvi`,signInRequiredTitle:`Accesso Bambu Cloud richiesto per scaricare`,signInRequiredBody:`Puoi consultare i dettagli del modello in modo anonimo, ma MakerWorld richiede un account Bambu Cloud per scaricare i file 3MF.`,signInExpiredTitle:`Accesso a Bambu Cloud scaduto`,signInExpiredBody:`Hai ancora effettuato l'accesso a Bambuddy, ma Bambu Lab non accetta più il token salvato, quindi i download non riusciranno. Accedi di nuovo a Bambu Cloud.`,openCloudSettings:`Apri impostazioni Cloud`,untitledModel:`Modello senza titolo`,byCreator:`di {{name}}`,downloadsCount:`{{count}} download`,licensePrefix:`Licenza`,alreadyImported:`Già nella libreria`,openOnMakerworld:`Apri su MakerWorld`,alreadyInLibrary:`Questo modello è già nella tua libreria — lo trovi in Gestione file → MakerWorld`,importSuccess:`{{filename}} importato — salvato in Gestione file → MakerWorld`,platesHeader:`Piatti ({{count}})`,plateDefaultName:`Piatto {{n}}`,materialCount:`{{count}} filamenti`,amsRequired:`AMS richiesto`,slicedFor:`Sezionato per {{printer}}`,alsoCompatible:`Anche contrassegnato come compatibile: {{printers}}`,importToLibrary:`Salva`,sliceIn:`Salva e affetta in {{slicer}}`,disclaimer:`L'integrazione MakerWorld utilizza endpoint API documentati dalla community. Bambuddy non è affiliato né approvato da MakerWorld o Bambu Lab.`,lastImportSuccess:`Importato nella tua libreria`,lastImportAlreadyInLibrary:`Già nella tua libreria`,viewInLibrary:`Visualizza in Gestione file`,openInBambuStudio:`Apri in Bambu Studio`,openInOrcaSlicer:`Apri in OrcaSlicer`,importTo:`Importa in Gestione file`,recentImportsHeader:`Importazioni recenti`,phaseResolving:`Risoluzione`,phaseDownloading:`Download`,folderAuto:`MakerWorld (predefinita)`,importAll:`Importa tutto`,importAllProgress:`Importazione {{current}}/{{total}}`,openGallery:`Apri galleria immagini`,galleryPrev:`Immagine precedente`,galleryNext:`Immagine successiva`,deleteImport:`Rimuovi dalla libreria`,importDeleting:`Rimozione…`,importDeleted:`Rimosso dalla libreria`,confirmDelete:`Rimuovere {{filename}} dalla libreria? Il file locale verrà eliminato, ma il piatto può essere re-importato da MakerWorld.`,errors:{resolveFailed:`Impossibile risolvere questo URL MakerWorld.`,downloadFailed:`Download non riuscito. Riprova.`,deleteFailed:`Impossibile rimuovere il file dalla libreria.`}},gcodeViewer:{filamentSlot:`Filamento {{n}}`,loading:`Lettura del percorso…`,loadFailed:`Impossibile caricare il G-code di questo file.`,showTravel:`Spostamenti a vuoto`,topLayer:`Strato superiore`,bottomLayer:`Strato inferiore`,noSource:`Nessun file da visualizzare è stato indicato.`,view:{filament:`Filamento`,feature:`Elemento`,height:`Altezza`,width:`Larghezza`},feature:{wall:`Pareti`,sparseInfill:`Riempimento rado`,solidInfill:`Riempimento solido`,bridge:`Ponte / sbalzo`,support:`Supporto`,skirt:`Skirt / brim`,gapFill:`Riempimento vuoti`,ironing:`Stiratura`,primeTower:`Torre di spurgo`},back:`Indietro`,backToArchives:`Torna agli archivi di stampa`,backToFiles:`Torna al gestore file`,plates:`Piastre`,plateN:`Piastra {{n}}`},libraryTrash:{title:`Cestino`,headerButton:`Cestino`,headerTooltip:`Visualizza i file spostati nel cestino`,backToFiles:`Torna al gestore file`,subtitleAdmin:`I file eliminati restano qui per {{days}} giorni, poi vengono rimossi automaticamente. Questa vista mostra il cestino di tutti gli utenti.`,subtitleUser:`I file eliminati restano qui per {{days}} giorni, poi vengono rimossi automaticamente.`,loading:`Caricamento del cestino…`,loadError:`Impossibile caricare il cestino.`,empty:`Il cestino è vuoto.`,summary:`{{count}} file · {{size}}`,emptyTrash:`Svuota cestino`,restore:`Ripristina`,purgeNow:`Elimina ora`,autoPurgeIn:`Eliminazione automatica tra {{when}}`,days:`giorni`,retentionLabel:`Elimina automaticamente dopo`,selectAll:`Seleziona tutto`,selectOne:`Seleziona {{filename}}`,selectionCount:`{{count}} selezionati`,bulkRestore:`Ripristina selezionati`,bulkPurge:`Elimina selezionati`,col:{filename:`File`,folder:`Cartella`,size:`Dimensione`,deleted:`Spostato nel cestino`,autoPurge:`Eliminazione auto.`,owner:`Proprietario`,actions:`Azioni`},confirm:{purgeTitle:`Eliminare definitivamente?`,purgeBody:`{{filename}} verrà eliminato dal disco e non potrà essere ripristinato.`,emptyTitle:`Svuotare il cestino?`,emptyBody:`Tutti i {{count}} file verranno eliminati dal disco. Azione non annullabile.`,bulkPurgeTitle:`Eliminare definitivamente i file selezionati?`,bulkPurgeBody:`I {{count}} file selezionati verranno eliminati dal disco e non potranno essere ripristinati.`,cta:`Elimina definitivamente`},toast:{restored:`File ripristinato.`,restoreFailed:`Impossibile ripristinare il file.`,purged:`File eliminato definitivamente.`,purgeFailed:`Impossibile eliminare il file.`,emptied:`{{count}} file eliminati dal cestino.`,emptyFailed:`Impossibile svuotare il cestino.`,retentionSaved:`Eliminazione automatica impostata su {{days}} giorni.`,retentionFailed:`Impossibile salvare l'impostazione di conservazione.`,bulkRestored:`{{count}} file ripristinati.`,bulkPurged:`{{count}} file eliminati.`}},libraryPurge:{title:`Elimina file vecchi`,headerButton:`Elimina vecchi`,headerTooltip:`Sposta in blocco i file vecchi nel cestino`,description:`I file più vecchi della soglia verranno spostati nel cestino. Le cartelle esterne vengono ignorate. Puoi ripristinarli dal cestino prima dell'eliminazione automatica.`,ageLabel:`Sposta i file più vecchi di`,days:`giorni`,includeNeverPrinted:`Includi i file mai stampati`,effectsTitle:`Cosa succede quando fai clic su Pulisci`,effect1:`I file corrispondenti vengono spostati nel cestino — non sono ancora eliminati dal disco.`,effect2:`Puoi ripristinarli dal cestino in qualsiasi momento fino alla scadenza del periodo di conservazione.`,effect3:`Dopo il periodo di conservazione, lo spazzino del cestino li rimuove definitivamente.`,effect4:`I file in cartelle esterne (collegate) vengono saltati — Bambuddy non elimina mai dati che non possiede.`,previewLoading:`Verifica quanti file corrispondono…`,previewFailed:`Impossibile mostrare l'anteprima.`,previewSummary:`{{count}} file · {{size}} verrebbero spostati nel cestino`,andMore:`…e altri {{count}}`,warning:`I file vengono eliminati in modo soft — puoi ripristinarli dal cestino fino alla scadenza del periodo di conservazione.`,confirmCta:`Sposta {{count}} nel cestino`,purging:`Spostamento nel cestino…`,toast:{success:`{{count}} file spostati nel cestino.`,failed:`Impossibile eliminare i file.`}},libraryAutoPurge:{enableLabel:`Elimina automaticamente i file vecchi`,enableDescription:`Esegue l'eliminazione amministrativa una volta al giorno. I file finiscono prima nel cestino — non vengono eliminati immediatamente.`,ageLabel:`Elimina automaticamente i file più vecchi di`,ageDescription:`Minimo 7 giorni, massimo 10 anni. Usa la stessa regola di età del pulsante Elimina manuale.`,days:`giorni`,includeNeverPrinted:`Includi i file mai stampati`,saveFailed:`Impossibile salvare le impostazioni di eliminazione automatica.`},archivePurge:{headerButton:`Elimina vecchi`,headerTooltip:`Eliminazione massiva vecchi archivi`,title:`Elimina vecchi archivi`,description:`Cancella la vecchia cronologia di stampa. Ogni archivio invecchia in base alla sua ultima stampa completata — ristampare azzera l'età, quindi il lavoro attivo non viene mai eliminato.`,ageLabel:`Elimina archivi non stampati negli ultimi`,days:`giorni`,effectsTitle:`Cosa succede quando fai clic su Pulisci`,effect1:`Ogni archivio corrispondente viene nascosto dagli elenchi e i suoi file vengono rimossi dal disco (3MF, miniatura, timelapse, 3MF sorgente, F3D, foto).`,effect2:`La riga dell'archivio rimane nel database, così le Quick Stats conservano il contributo di filamento, tempo, costo ed energia — come il comportamento predefinito dell'eliminazione singola.`,effect3:`Spunta «Rimuovi anche dalle statistiche» qui sotto per eliminare anche il contributo dalle Quick Stats (equivalente all'opzione dell'eliminazione singola). Questo percorso è irreversibile.`,effect4:`Ristampare un archivio azzera il suo conteggio dell'età, quindi gli archivi attivi sono al sicuro.`,purgeStatsLabel:`Rimuovi anche dalle statistiche`,purgeStatsHint:`Rimuove gli archivi selezionati dalle Quick Stats (filamento, tempo, costo, energia). Senza questa opzione le Quick Stats conservano ogni contributo e solo i file vengono cancellati.`,previewLoading:`Verifica del numero di archivi corrispondenti…`,previewFailed:`Impossibile visualizzare l'anteprima della pulizia.`,previewSummary:`{{count}} archivi · {{size}} verrebbero rimossi`,andMore:`…e altri {{count}}`,warning:`I file vengono rimossi dal disco e non possono essere ripristinati. Scarica o aggiungi ai preferiti tutto ciò che vuoi conservare prima di continuare.`,confirmCta:`Rimuovi {{count}} archivio(i)`,purging:`Rimozione…`,toast:{success:`{{count}} archivio(i) rimosso.`,failed:`Impossibile eliminare gli archivi.`}},archiveAutoPurge:{enableLabel:`Elimina auto. vecchi archivi`,enableDescription:`Una volta al giorno nasconde dagli elenchi gli archivi non stampati entro la soglia e rimuove i loro file dal disco. Ristampare azzera il timer.`,ageLabel:`Eliminazione auto. di archivi non stampati negli ultimi`,ageDescription:`Minimo 7 giorni, massimo 10 anni. Basato sull'ultima stampa completata — ristampare azzera l'età. Rimuove 3MF, miniatura, timelapse, 3MF sorgente, F3D e foto.`,days:`giorni`,purgeStatsLabel:`Rimuovi anche dalle statistiche`,purgeStatsDescription:`Quando abilitato, lo sweeper giornaliero elimina anche il contributo di ogni archivio purgato dalle Quick Stats (filamento, tempo, costo, energia). Disabilitato per impostazione predefinita — le Quick Stats mantengono il contributo e solo i file vengono cancellati.`,runNow:`Elimina archivi ora`,saveFailed:`Impossibile salvare le impostazioni di pulizia automatica.`},cameraTokens:{scope:{camera_stream:`Flusso della telecamera`,camwall:`Muro telecamere`,overlay:`Overlay di streaming`},title:`Token API telecamera`,navTitle:`Token API telecamera`,description:`Token di lunga durata per incorporare il flusso della telecamera in Home Assistant, Frigate, schermi in modalità chiosco o qualsiasi altro strumento che richieda un indirizzo stabile. L'ambito si sceglie alla creazione; un token può essere revocato in qualsiasi momento.`,loading:`Caricamento…`,confirmRevoke:{title:`Revocare questo token?`,body:`Qualsiasi dispositivo che usa "{{name}}" perderà l'accesso immediatamente. Non può essere annullato.`,cancel:`Annulla`,confirm:`Revoca`},create:{scopeLabel:`Ambito`,hintCameraStream:`Un token del flusso della telecamera può recuperare soltanto flussi e istantanee. Usalo per Home Assistant, Frigate o qualsiasi cosa incorpori una singola telecamera.`,hintCamWall:`Un token Muro telecamere apre /camwall su uno schermo senza login. Vede nome e stato di ogni stampante e i relativi flussi della telecamera. Non vede nomi di file, indirizzi o codici di accesso.`,hintOverlay:`Un token Overlay di streaming apre /overlay/{printerId} su uno schermo senza login, per OBS o qualsiasi diretta streaming. Vede il flusso della telecamera di una stampante e il suo stato di stampa in tempo reale, incluso il nome del file mostrato sullo schermo. Non vede indirizzi o codici di accesso.`,title:`Crea nuovo token`,nameLabel:`Nome token`,namePlaceholder:`es. Home Assistant`,daysLabel:`Giorni alla scadenza`,submit:`Crea`,hint:`Durata massima 365 giorni. Il valore del token viene mostrato solo alla creazione — copialo ora.`},created:{camWallUrlTitle:`Indirizzo del muro telecamere per questo schermo`,camWallUrlHint:`Apri questo indirizzo sullo schermo. Chiunque possa leggerlo può guardare il muro, quindi trattalo come una chiave: revoca il token per escludere lo schermo.`,overlayUrlTitle:`Indirizzo overlay per OBS`,overlayUrlHint:`Aggiungi questo come Sorgente browser in OBS. Cambia il numero in /overlay/1 con il numero della tua stampante (dall'indirizzo nella pagina Stampanti). Chiunque possa leggere l'indirizzo può guardare lo streaming, quindi trattalo come una chiave: revoca il token per interrompere l'accesso.`,title:`Token creato – copialo ora`,warning:`Questa è l'unica volta in cui questo token sarà visibile. Dopo la chiusura di questa finestra non potrai più visualizzarlo.`,copy:`Copia`,dismiss:`L'ho salvato`},list:{scope:`Ambito`,myTitle:`I miei token`,allTitle:`Tutti gli utenti (vista admin)`,empty:`Nessun token ancora.`,name:`Nome`,owner:`Proprietario`,prefix:`Prefisso`,created:`Creato`,expires:`Scade`,lastUsed:`Ultimo uso`,revoke:`Revoca`,expired:`Scaduto`},toast:{created:`Token creato`,createFailed:`Creazione token fallita`,revoked:`Token revocato`,revokeFailed:`Revoca token fallita`,loadFailed:`Caricamento token fallito`,copied:`Copiato negli appunti`,copyFailed:`Copia non riuscita – seleziona e copia manualmente`}},forecast:{title:`Previsione scorte`,noSpools:`Nessuna bobina attiva trovata. Aggiungi bobine al tuo inventario per vedere i dati di previsione.`,noUsageData:`Nessun dato di utilizzo disponibile — impossibile proiettare la timeline delle scorte.`,sku:`SKU`,material:`Materiale`,stock:`Scorte`,dailyRate:`Tasso`,daysLeft:`Giorni rimanenti`,emptyBy:`Esaurimento previsto`,reorderBy:`Riordinare entro`,actions:`Azioni`,trend:`Tendenza`,estimated:`Stim.`,noData:`Nessun dato`,timeframe:`Periodo`,chartTitle:`Stock proiettato — Top 5 materiali`,dashedLinesROP:`Linee tratteggiate = punti di riordino`,stockLevel:`Livello scorte`,reorderPoint:`Punto di riordino`,safetyMargin:`Margine di sicurezza`,trendLegend:`Tendenza (basata su storico, livello servizio 95%)`,estimatedLegend:`Stimata (delta peso)`,noDataLegend:`Nessun dato`,ropLabel:`PR`,ssLabel:`SS`,safetyStockLegend:`Scorta di sicurezza`,stockArrivalLegend:`Arrivo merce`,stockoutLegend:`Esaurimento scorte`,alertCount_one:`{{count}} avviso`,alertCount_other:`{{count}} avvisi`,order:`Ordina`,globalLeadTime:`Lead time globale`,globalLeadTimeHint:`Lead time globale minimo — usato nel calcolo del punto di riordino per tutti gli SKU`,save:`Salva`,cancel:`Annulla`,settingsSaved:`Impostazioni salvate`,failedSaveSettings:`Impossibile salvare le impostazioni`,globalLeadTimeSaved:`Lead time globale salvato`,skuLeadTimeOverride:`Override lead time SKU`,skuLeadTimeHint:`0 = usa lead time globale. Imposta >0 per sovrascrivere per questo SKU.`,safetyMarginLabel:`Margine di sicurezza`,effectiveLeadTime:`Lead time effettivo`,effectiveLeadTimeHint:`max(globale {{global}}g, SKU {{sku}}g)`,reorderPointHint:`d̄ × LT + safety margin — ordina quando le scorte raggiungono questo livello`,safetyMarginHint:`Scorta di sicurezza statistica (z=1,65 × σ × √LT) + buffer definito dall'utente`,safetyMarginHintDays:`Buffer aggiunto sulla scorta di sicurezza statistica.{{approx}}`,safetyMarginHintDaysApprox:` ≈ {{g}}g al tasso attuale.`,safetyMarginHintG:`Buffer di peso fisso aggiunto sulla scorta di sicurezza statistica.{{approx}}`,safetyMarginHintGApprox:` ≈ {{days}}g al tasso attuale.`,individualSpools:`Bobine singole`,labelWeight:`Etichetta`,spoolCount_one:`{{count}} bobina`,spoolCount_other:`{{count}} bobine`,stockBreakRisk:`Rischio di rottura scorte`,stockBreakBefore:`Rottura scorte prima del rifornimento`,stockBreakDetail:`{{days}}g rimanenti, lead time {{lt}}g.`,reorderNow:`Riordina ora`,reorderTriggerPassed:`La data di attivazione {{date}} è passata.`,shoppingList:`Lista della spesa`,shoppingListItems_one:`({{count}} articolo)`,shoppingListItems_other:`({{count}} articoli)`,shoppingListEmpty:`La lista della spesa è vuota. Clicca sull'icona del carrello in qualsiasi riga per aggiungere articoli.`,addToCart:`Aggiungi alla lista della spesa`,alertsSnoozed:`Silenzia avvisi per questo SKU`,alertsEnabled:`Riattiva avvisi per questo SKU`,addedToCart:`Aggiunto alla lista della spesa`,failedAddItem:`Impossibile aggiungere l'articolo`,listView:`Lista`,logisticsView:`Logistica`,qty:`Qtà`,weight:`Peso`,leadTime:`Lead time`,expectedRestock:`Rifornimento previsto`,status:`Stato`,note:`Nota`,pending:`In attesa`,purchased:`Acquistato`,received:`Ricevuto`,markPurchased:`Segna come acquistato`,markReceived:`Segna come ricevuto — aggiunge bobine all'inventario`,resetToPending:`Ripristina in attesa`,remove:`Rimuovi`,clearAll:`Cancella tutto`,downloadCsv:`CSV`,addToCartTitle:`Aggiungi alla lista della spesa`,byQuantity:`Per quantità`,byDuration:`Per durata`,numberOfSpools:`Numero di bobine`,lastHowManyDays:`Per quanti giorni deve durare?`,noUsageQty:`Nessun dato di utilizzo — quantità impostata a 1.`,noteOptional:`Nota (opzionale)`,notePlaceholder:`es. per il progetto X, urgente…`,addNSpools_one:`Aggiungi {{count}} bobina`,addNSpools_other:`Aggiungi {{count}} bobine`,onArrival:`All'arrivo`,stockBreakIn:`Rottura scorte tra {{days}}g.`,stockRunsOutBefore:`Le scorte si esauriscono prima dello scadere del lead time di {{lt}}g.`,atRate:`A {{rate}}g/giorno hai bisogno di`,moreSpools_one:`{{count}} bobina in più`,moreSpools_other:`{{count}} bobine in più`,bridgeGap:`per colmare il divario.`,noReadAccess:`Non hai il permesso di visualizzare le previsioni di inventario.`,noWriteAccess:`Non hai il permesso di modificare le impostazioni di previsione.`}}},nl:{translation:{nav:{printers:`Printers`,archives:`Archieven`,queue:`Afdrukwachtrij`,stats:`Statistieken`,profiles:`Profielen`,maintenance:`Onderhoud`,projects:`Projecten`,finance:`Financiën`,inventory:`Filament`,files:`Bestandsbeheer`,makerworld:`MakerWorld`,notifications:`Meldingen`,settings:`Instellingen`,system:`Systeem`,collapseSidebar:`Zijbalk inklappen`,expandSidebar:`Zijbalk uitklappen`,update:`Bijwerken`,updateAvailable:`Update beschikbaar: v{{version}}`,updateAvailableBanner:`Versie {{version}} is beschikbaar!`,viewUpdate:`Update bekijken`,viewOnGithub:`Bekijken op GitHub`,keyboardShortcuts:`Sneltoetsen (?)`,switchToLight:`Overschakelen naar lichte modus`,switchToDark:`Overschakelen naar donkere modus`,switchToSystem:`Overschakelen naar systeemmodus`,smartSwitches:`Slimme schakelaars`,logout:`Uitloggen`,installApp:`App installeren`,installAppSuccess:`Bambuddy is geïnstalleerd`},common:{plusNMore:`+{{count}} meer`,save:`Opslaan`,saving:`Opslaan...`,cancel:`Annuleren`,delete:`Verwijderen`,edit:`Bewerken`,add:`Toevoegen`,close:`Sluiten`,confirm:`Bevestigen`,loading:`Laden...`,error:`Fout`,errorLoading:`Fout bij laden van gegevens`,retry:`Opnieuw proberen`,success:`Geslaagd`,warning:`Waarschuwing`,enabled:`Ingeschakeld`,disabled:`Uitgeschakeld`,yes:`Ja`,no:`Nee`,on:`Aan`,off:`Uit`,all:`Alle`,none:`Geen`,search:`Zoeken`,filter:`Filteren`,sort:`Sorteren`,refresh:`Vernieuwen`,download:`Downloaden`,upload:`Uploaden`,uploading:`Uploaden...`,uploadFailed:`Upload mislukt`,actions:`Acties`,status:`Status`,name:`Naam`,user:`Gebruiker`,description:`Beschrijving`,date:`Datum`,time:`Tijd`,hours:`uren`,minutes:`minuten`,seconds:`seconden`,days:`dagen`,enable:`Inschakelen`,disable:`Uitschakelen`,permissions:`Machtigingen`,noPrinters:`Geen printers geconfigureerd`,noData:`Geen gegevens beschikbaar`,linkNotFound:`Link niet gevonden`,required:`Verplicht`,optional:`Optioneel`,dismiss:`Negeren`,apply:`Toepassen`,reset:`Resetten`,export:`Exporteren`,import:`Importeren`,clear:`Wissen`,selectAll:`Alles selecteren`,deselectAll:`Alles deselecteren`,noChange:`— Geen wijziging —`,unchanged:`Ongewijzigd`,unassigned:`Niet toegewezen`,unknown:`Onbekend`,unknownError:`Onbekende fout`,today:`Vandaag`,tomorrow:`Morgen`,asap:`Zo snel mogelijk`,overdue:`Te laat`,now:`Nu`,collapse:`Inklappen`,expand:`Uitklappen`,previous:`Vorige`,next:`Volgende`,viewArchive:`Archief bekijken`,viewInFileManager:`Bekijken in Bestandsbeheer`,addedBy:`Toegevoegd door {{username}}`,prints:`afdrukken`,more:`+{{count}} meer`,ascending:`Oplopend`,descending:`Aflopend`,back:`Terug`,copy:`Kopiëren`,copied:`Gekopieerd!`,printer:`Printer`,remove:`Verwijderen`,type:`Type`,print:`Afdrukken`,rename:`Naam wijzigen`,move:`Verplaatsen`,create:`Maken`,duplicate:`Dupliceren`,left:`Links`,right:`Rechts`,run:`Uitvoeren`,running:`Bezig met uitvoeren...`},finance:{allTypes:`Alle typen`,allCostCenters:`Alle kostenplaatsen`,title:`Financiën`,subtitle:`Portemonnee, persoonlijke transacties en kostenplaatsen`,noAccess:`Je hebt geen toestemming om financiële gegevens te bekijken.`,personalView:`Persoonlijke weergave`,adminView:`Beheerdersweergave`,createCostCenter:`Kostenplaats maken`,adjustWallet:`Portemonnee aanpassen`,addManualPrint:`Handmatige afdruk toevoegen`,manageMembers:`Leden van kostenplaats beheren`,currentBalance:`Persoonlijk saldo`,transactions:`Transacties`,personalTransactions:`Persoonlijke transacties`,costCenters:`Kostenplaatsen`,availableForPrinting:`Beschikbaar voor toewijzing aan afdruk`,costCenterName:`Naam`,budgetType:`Budgettype`,monthlyBudget:`Maandbudget`,totalBudget:`Totaalbudget`,noBudget:`Geen budget`,create:`Maken`,selectUser:`Gebruiker selecteren`,transactionType:`Type`,amount:`Bedrag`,noCostCenter:`Geen kostenplaats`,descriptionOptional:`Beschrijving (optioneel)`,applyAdjustment:`Aanpassing toepassen`,memberCanPrint:`Lid mag afdrukken`,addMember:`Lid toevoegen`,canPrint:`Mag afdrukken`,noMembers:`Geen leden toegewezen.`,editCostCenter:`Kostenplaats bewerken`,myCostCenters:`Mijn kostenplaatsen`,costCentersHint:`Controleer budgetlimieten en houd kosten onder controle`,noCostCenters:`Geen kostenplaatsen gevonden.`,owner:`Eigenaar`,balance:`Rekeningsaldo`,unlimited:`Onbeperkt`,budgetPolicyHint:`Rekeningsaldi houden kosten bij. Afdrukken wordt alleen beperkt door het budget van de geselecteerde kostenplaats; zonder budget is afdrukken onbeperkt.`,budget:`Budget`,shared:`Gedeeld`,cannotEditPrivateCostCenter:`Privé-kostenplaatsen kunnen hier niet worden bewerkt`,recentTransactions:`Recente transacties`,transactionsHint:`Filteren op type en kostenplaats`,first:`Eerste`,prev:`Vorige`,next:`Volgende`,last:`Laatste`,pageNumberOf:`Pagina {{page}} van {{total}}`,noTransactions:`Geen transacties beschikbaar.`,noTransactionsForFilter:`Geen transacties komen overeen met de geselecteerde filters.`,costCenter:`Kostenplaats`,balanceAfter:`Saldo na`,userWithId:`Gebruiker #{{id}}`,partial:`Gedeeltelijk`,editTransaction:`Transactie bewerken`,selectCostCenter:`Kostenplaats selecteren...`,costCenterRequired:`Selecteer een kostenplaats`,amountExample:`bijv. 4,00`,manualAdjustmentExample:`bijv. Handmatige aanpassing`,userRequired:`Selecteer een gebruiker`,amountInvalid:`Bedrag moet een geldig getal zijn`,createdCostCenter:`Kostenplaats gemaakt`,createCostCenterFailed:`Kostenplaats maken mislukt`,transactionDeleted:`Transactie verwijderd`,deleteTransactionFailed:`Transactie verwijderen mislukt`,transactionEdited:`Transactie bijgewerkt en grootboek opnieuw berekend`,editTransactionFailed:`Transactie bewerken mislukt`,manualPrintCreated:`Handmatige afdrukkosten toegevoegd en grootboek opnieuw berekend`,manualPrintFailed:`Handmatige afdruk maken mislukt`,memberSaved:`Lid opgeslagen`,memberSaveFailed:`Lid opslaan mislukt`,memberRemoved:`Lid verwijderd`,memberRemoveFailed:`Lid verwijderen mislukt`,costCenterNameRequired:`Naam van kostenplaats is verplicht`,costCenterUpdated:`Kostenplaats bijgewerkt`,costCenterUpdateFailed:`Kostenplaats bijwerken mislukt`,confirmDeleteCostCenter:`Kostenplaats "{{name}}" verwijderen?`,costCenterDeleted:`Kostenplaats verwijderd`,costCenterDeleteFailed:`Kostenplaats verwijderen mislukt`,deleteTransactionConfirm:`Deze transactie verwijderen? Saldi worden automatisch opnieuw berekend.`,deposit:`Storten`,withdraw:`Opnemen`,printCharge:`Afdrukkosten`,deleteTransaction:`Transactie verwijderen`},printers:{title:`Printers`,addPrinter:`Printer toevoegen`,addPreflight:{checking:`Verbinding controleren...`,warning:`Sommige verbindingscontroles zijn mislukt. Deze printer kan als offline worden weergegeven. Controleer de onderstaande controles, herstel wat je kunt of sla toch op.`,back:`Terug`,saveAnyway:`Toch opslaan`},editPrinter:`Printer bewerken`,deletePrinter:`Printer verwijderen`,printerName:`Printernaam`,serialNumber:`Serienummer`,ipAddress:`IP-adres / hostnaam`,accessCode:`Toegangscode`,model:`Model`,nozzleCount:`Aantal nozzles`,autoArchive:`Automatisch archiveren`,status:{available:`Beschikbaar`,idle:`Inactief`,printing:`Bezig met afdrukken`,paused:`Gepauzeerd`,offline:`Offline`,problem:`Probleem`,error:`Fout`,finished:`Voltooid`,unknown:`Onbekend`},temperatures:{nozzle:`Nozzle`,bed:`Printbed`,chamber:`Kamer`},heaterHistory:{title:`Verwarmingsgeschiedenis`,openLabel:`Verwarmingsgeschiedenis bekijken`,nozzle:`Nozzle`,nozzle2:`Nozzle 2`,bed:`Printbed`,chamber:`Kamer`,error:`Geschiedenis laden mislukt`,empty:`Nog geen gegevens vastgelegd`},progress:`{{percent}}% voltooid`,timeRemaining:`{{time}} resterend`,deleteConfirm:`Weet je zeker dat je "{{name}}" wilt verwijderen?`,maintenanceOk:`Onderhoud OK`,maintenanceWarning:`{{count}} waarschuwing`,maintenanceWarning_plural:`{{count}} waarschuwingen`,maintenanceDue:`{{count}} te doen`,maintenanceDue_plural:`{{count}} te doen`,sort:{name:`Naam`,status:`Status`,model:`Model`,location:`Locatie`,eta:`ETA`,ascending:`Oplopend sorteren`,descending:`Aflopend sorteren`},cardSize:{small:`Kleine kaarten`,medium:`Middelgrote kaarten`,large:`Grote kaarten`,extraLarge:`Extra grote kaarten`},pageView:{openCamWallPage:`Camerawand als pagina openen`,cards:`Kaarten`,camWall:`Camerawand`},camWall:{page:{tokenRejected:`Deze camerawandlink is niet meer geldig. Het token is mogelijk verlopen of ingetrokken.`,loadFailed:`Printers konden niet worden geladen.`},noPrinters:`Geen printers om weer te geven`,noSignal:`Geen signaal`,live:`Live`,snap:`Momentopname`,off:`Uit`,summary:`{{live}} live, {{snap}} momentopnamen, {{total}} totaal`,layer:`Laag {{cur}}/{{total}}`,timeLeft:`{{time}} resterend`,statusMode:{off:`Uit`,compact:`Compact`,full:`Volledig`},settings:{title:`Instellingen camerawand`,maxLive:`Max. live streams`,maxLiveHint:`Hoeveel tegels tegelijk live streamen. De overige worden vernieuwd als momentopnamen.`,snapshotInterval:`Interval momentopnamen (seconden)`,snapshotIntervalHint:`Hoe vaak niet-live tegels een nieuwe momentopname ophalen.`,statusOverlay:`Statusoverlay`,statusOverlayHint:`Compact: alleen statusbadge. Volledig: + voortgang, laag, resterende tijd.`}},hideOffline:`Offline verbergen`,nextAvailable:`Volgende beschikbare`,powerOn:`Inschakelen`,offlinePrintersWithPlugs:`Offline printers met slimme stekkers`,noPrintersConfigured:`Nog geen printers geconfigureerd`,search:`Printers zoeken...`,noSearchResults:`Geen printers komen overeen met je zoekopdracht of filters`,filter:{allStatuses:`Alle statussen`,allLocations:`Alle locaties`},toolbar:{filters:`Filters`,view:`Weergave`,actions:`Acties`},readyToPrint:`Klaar om af te drukken`,external:`Extern`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Afdrukarchieven verwijderen`,noLabel:`Geen label`,printPreview:`Afdrukvoorbeeld`,width:`Breedte`,height:`Hoogte`,noObjectsFound:`Geen objecten gevonden`,objectsLoadedOnPrintStart:`Objecten worden geladen wanneer een afdruk start`,willBeSkipped:`Wordt overgeslagen`,name:`Naam`,serialCannotBeChanged:`Serienummer kan niet worden gewijzigd`,locationHelp:`Gebruikt om printers te groeperen en wachtrijtaken te filteren`,wifiSignal:{veryWeak:`Zeer zwak`,weak:`Zwak`,fair:`Redelijk`,good:`Goed`,excellent:`Uitstekend`},maintenanceUpToDate:`Al het onderhoud is bijgewerkt - Klik om te bekijken`,maintenance:{title:`In onderhoud`,subtitle:`Deze printer is gepauzeerd — niet verbonden, niet beschikbaar voor de wachtrij en verzendt geen meldingen.`,pillLabel:`Onderhoud`,exitButton:`Onderhoud afsluiten`,menuEnter:`Onderhoudsmodus inschakelen`,menuExit:`Onderhoudsmodus afsluiten`,toastEntered:`{{name}} staat nu in onderhoudsmodus`,toastExited:`{{name}} is weer online`,confirmMidPrintTitle:`Onderhoudsmodus inschakelen tijdens afdrukken?`,confirmMidPrintMessage:`{{name}} is momenteel aan het afdrukken. Als je de onderhoudsmodus inschakelt, wordt MQTT verbroken en stoppen voortgangsregistratie en voltooiingsmeldingen voor deze taak. Doorgaan?`,editFieldLabel:`Onderhoudsmodus`,editFieldHelp:`Als dit is ingeschakeld, wordt deze printer gepauzeerd voor MQTT, wachtrijverwerking en meldingen — handig voor reparatie, parallelle Bambuddy-installaties of tijdelijke buitengebruikstelling.`},chamberLightOn:`Kamerverlichting inschakelen`,chamberLightOff:`Kamerverlichting uitschakelen`,files:`Bestanden`,browseFiles:`Printerbestanden bekijken`,autoOffAfterPrint:`Automatisch uitschakelen na afdruk`,autoOffExecuted:`Automatisch uitschakelen is uitgevoerd - schakel de printer in om te resetten`,hmsErrors:`HMS-fouten`,viewHmsErrors:`{{count}} HMS-fout(en) bekijken`,resume:`Hervatten`,pause:`Pauzeren`,stop:`Stoppen`,camera:`Camera`,skipObject:`Object overslaan`,reconnect:`Opnieuw verbinden`,forceRefresh:`Geforceerd vernieuwen`,forceRefreshSuccess:`Vernieuwing aangevraagd`,mqttDebug:`MQTT-debug`,printerInformation:`Printerinformatie`,copyToClipboard:`Kopiëren`,copied:`Gekopieerd!`,state:`Status`,wifiSignalLabel:`Wifi-signaal`,developerMode:`Ontwikkelaarsmodus`,enabled:`Ingeschakeld`,disabled:`Uitgeschakeld`,addedOn:`Toegevoegd`,sdCard:`SD-kaart`,inserted:`Geplaatst`,notInserted:`Niet geplaatst`,totalPrintHours:`Afdrukuren`,activeNozzle:`Actief: {{nozzle}}-nozzle`,amsSwitchInletTooltip:`Filament Track Switch IN-{{inlet}} ({{side}}) — voedt beide nozzles`,nozzleRack:`Nozzlerek`,nozzleDocked:`Gedockt`,nozzleMounted:`Gemonteerd`,nozzleActive:`Actief`,nozzleIdle:`Inactief`,nozzleDiameter:`Diameter`,nozzleType:`Type`,nozzleStatus:`Status`,nozzleFilament:`Filament`,nozzleWear:`Slijtage`,nozzleMaxTemp:`Max. temp.`,nozzleSerial:`Serienummer`,nozzleHardenedSteel:`Gehard staal`,nozzleStainlessSteel:`Roestvast staal`,nozzleTungstenCarbide:`Wolfraamcarbide`,nozzleFlow:`Flow`,nozzleHighFlow:`Hoge flow`,nozzleStandardFlow:`Standaard`,firmwareUpdate:`Firmware-update`,firmwareInstructions:`Ga op het touchscreen van de printer naar`,firmwareNav:`Navigeer naar`,settings:`Instellingen`,firmware:`Firmware`,discoverPrinters:`Printers ontdekken`,searching:`Zoeken...`,manualEntry:`Handmatige invoer`,addFromCloud:`Toevoegen vanuit cloud`,toast:{printerDeleted:`Printer verwijderd`,missingSpoolAssignment:`Afdruk gestart op {{printer}}. Spoeltoewijzing ontbreekt voor: {{slots}}`,killSwitchTriggered:`De facturerings-noodstop heeft een ongeautoriseerde afdruk op {{printer}} gestopt: {{filename}}`,billingChargeFailed:`Facturering mislukt voor {{filename}} op {{printer}}. De budgetreservering is behouden; controleer de serverlogboeken.`,assignmentVerified:`Filament geladen in sleuf {{slot}} ({{printer}})`,assignmentVerifiedNoKprofile:`Sleuf {{slot}} op {{printer}} is geladen, maar de flowkalibratie (K-profiel) is niet toegepast`,assignmentNotConfirmed:`De toewijzing voor sleuf {{slot}} op {{printer}} kon niet worden bevestigd — controleer de AMS-sleuf`,printerAdded:`Printer toegevoegd`,printerUpdated:`Printer bijgewerkt`,failedToDelete:`Printer verwijderen mislukt`,failedToAdd:`Printer toevoegen mislukt`,connectionFailedNotAdded:`Kan geen verbinding maken met de printer. Controleer het IP-adres, serienummer en de toegangscode en bevestig dat LAN-only-modus is ingeschakeld. De printer is niet toegevoegd.`,failedToUpdate:`Printer bijwerken mislukt`,commandSent:`Opdracht verzonden`,failedToSendCommand:`Opdracht verzenden mislukt`,turnedOn:`{{name}} ingeschakeld`,failedToPowerOn:`Inschakelen van {{name}} mislukt`,scriptTriggered:`Script geactiveerd`,printStopped:`Afdruk gestopt`,printPaused:`Afdruk gepauzeerd`,printResumed:`Afdruk hervat`,referenceDeleted:`Referentie verwijderd`,detectionAreaSaved:`Detectiegebied opgeslagen`,failedToRunScript:`Script uitvoeren mislukt`,failedToStopPrint:`Afdruk stoppen mislukt`,failedToPausePrint:`Afdruk pauzeren mislukt`,failedToResumePrint:`Afdruk hervatten mislukt`,failedToControlChamberLight:`Kamerverlichting bedienen mislukt`,failedToSetSpeed:`Afdruksnelheid instellen mislukt`,failedToUpdateSetting:`Instelling bijwerken mislukt`,failedToSkipObjects:`Objecten overslaan mislukt`,failedToRereadRfid:`RFID opnieuw uitlezen mislukt`,failedToCheckPlate:`Plaat controleren mislukt`,failedToUpdateLabel:`Label bijwerken mislukt`,failedToDeleteReference:`Referentie verwijderen mislukt`,failedToSaveDetectionArea:`Detectiegebied opslaan mislukt`,plateCheckEnabled:`Plaatcontrole ingeschakeld`,plateCheckDisabled:`Plaatcontrole uitgeschakeld`,calibrationSaved:`Kalibratie opgeslagen!`,calibrationFailed:`Kalibratie mislukt`,rfidRereadInitiated:`Opnieuw uitlezen van RFID gestart`,loadInitiated:`Filament laden…`,unloadInitiated:`Filament ontladen…`,failedToLoad:`Filament laden mislukt`,failedToUnload:`Filament ontladen mislukt`},connection:{connected:`Verbonden`,offline:`Offline`},plateStatus:{markCleared:`Plaat als leeg markeren`,cleared:`Plaat leeg`,notCleared:`Plaat niet leeg`,inUse:`Plaat in gebruik`},queue:{inQueue:`{{count}} afdruk in wachtrij`,inQueue_plural:`{{count}} afdrukken in wachtrij`},controls:`Bediening`,rfid:{reread:`RFID opnieuw uitlezen`},ams:{load:`Laden`,unload:`Ontladen`,feedTitle:`{{slot}} naar welke nozzle laden?`,feedPrompt:`De Filament Track Switch kan dit slot naar beide hotends leiden. Kies welke je wilt voeden.`,feedLeft:`Linker nozzle`,feedRight:`Rechter nozzle`,feedAlreadyLoaded:`Al geladen`,switchNotReady:`De Filament Track Switch is nog niet ingesteld. Wijs elke AMS toe aan een inlaat op de printer en probeer het opnieuw.`},bedJog:{limitWarning:`Bewegingslimieten worden niet afgedwongen tijdens handmatige verplaatsingen — door een bug in Bambu-firmware worden software-eindstops bij externe opdrachten genegeerd. Verplaats voorzichtig om een botsing te voorkomen.`,title:`Jog-bediening`,bed:`Printbed`,step:`Stap (mm)`,up:`Plaat omhoog bewegen`,down:`Plaat omlaag bewegen`,toolheadUp:`Printkop omhoog bewegen`,toolheadDown:`Printkop omlaag bewegen`,disabledWhilePrinting:`Uitgeschakeld tijdens afdrukken`,notHomedTitle:`Printer is niet gehomed`,notHomedMessage:`De printer is sinds de laatste afdruk niet gehomed. Voer eerst auto-home uit voor een veilige positionering (parkeert de toolhead en homet daarna X, Y en Z), of verplaats toch — soft endstops worden omzeild.`,homeZ:`Auto Home`,moveAnyway:`Toch verplaatsen`,homingStarted:`Printer automatisch homen…`},permission:{noAdd:`Je hebt geen toestemming om printers toe te voegen`,noEdit:`Je hebt geen toestemming om printers te bewerken`,noDelete:`Je hebt geen toestemming om printers te verwijderen`,noControl:`Je hebt geen toestemming om printers te bedienen`,noFiles:`Je hebt geen toestemming om printerbestanden te openen`,noAmsRfid:`Je hebt geen toestemming om AMS-RFID opnieuw uit te lezen`,noSmartPlugControl:`Je hebt geen toestemming om slimme stekkers te bedienen`,noCamera:`Je hebt geen toestemming om camera's te bekijken`},modal:{addTitle:`Printer toevoegen`,editTitle:`Printer bewerken`,myPrinter:`Mijn printer`,selectModel:`Model selecteren...`,locationGroup:`Locatie / groep (optioneel)`,locationPlaceholder:`bijv. Werkplaats, kantoor, kelder`,autoArchiveLabel:`Voltooide afdrukken automatisch archiveren`,fromPrinterSettings:`Uit printerinstellingen`,modelOptional:`Model (optioneel)`,saveChanges:`Wijzigingen opslaan`},skipObjects:{tooltip:`Objecten overslaan`,onlyWhilePrinting:`Objecten overslaan (alleen tijdens afdrukken)`,requiresMultiple:`Objecten overslaan (vereist 2+ objecten)`,title:`Objecten overslaan`,matchIdsInfo:`Stem ID's af met het printerdisplay`,printerShowsIds:`Het printerscherm toont object-ID's op de bouwplaat`,skipSelected:`Geselecteerde overslaan`,skipping:`Overslaan...`,noObjectsSelected:`Geen objecten geselecteerd`,selectObjectsToSkip:`Selecteer objecten die je in de huidige afdruk wilt overslaan`,skipped:`overgeslagen`,objectsSkipped:`Objecten overgeslagen`,activeCount:`{{count}} actief`,waitForLayer:`Wacht tot laag 2+ om objecten over te slaan (momenteel laag {{layer}})`,skip:`Overslaan`,confirmTitle:`Object overslaan?`,confirmMessage:`Weet je zeker dat je "{{name}}" wilt overslaan? Dit kan niet ongedaan worden gemaakt.`,confirmAllMessage:`Alle resterende objecten zijn geselecteerd. Hierdoor wordt de afdruktaak gestopt. Doorgaan?`,confirmMultipleMessage:`{{count}} geselecteerde objecten overslaan? Dit kan niet ongedaan worden gemaakt.`},confirm:{deleteTitle:`Printer verwijderen`,deleteMessage:`Weet je zeker dat je "{{name}}" wilt verwijderen? Hiermee worden alle verbindingsinstellingen verwijderd.`,deleteArchivesNote:`De volledige afdrukgeschiedenis van deze printer wordt permanent verwijderd.`,keepArchivesNote:`De afdrukgeschiedenis blijft bewaard, maar is niet langer aan deze printer gekoppeld.`,stopTitle:`Afdruk stoppen`,stopMessage:`Weet je zeker dat je de huidige afdruk op "{{name}}" wilt stoppen? Hiermee wordt de afdruktaak geannuleerd.`,stopButton:`Afdruk stoppen`,pauseTitle:`Afdruk pauzeren`,pauseMessage:`Weet je zeker dat je de huidige afdruk op "{{name}}" wilt pauzeren?`,pauseButton:`Afdruk pauzeren`,resumeTitle:`Afdruk hervatten`,resumeMessage:`Weet je zeker dat je de afdruk op "{{name}}" wilt hervatten?`,resumeButton:`Afdruk hervatten`,powerOnTitle:`Printer inschakelen`,powerOnMessage:`Weet je zeker dat je de stroom voor "{{name}}" wilt INSCHAKELEN?`,powerOnButton:`Inschakelen`,powerOffTitle:`Printer uitschakelen`,powerOffMessage:`Weet je zeker dat je de stroom voor "{{name}}" wilt UITSCHAKELEN?`,powerOffWarning:`WAARSCHUWING: "{{name}}" is momenteel aan het afdrukken! Weet je zeker dat je de stroom wilt UITSCHAKELEN? Dit onderbreekt de afdruk en kan de printer beschadigen.`,powerOffButton:`Uitschakelen`,haToggleTitle:`"{{name}}" omschakelen`,haToggleMessage:`Home Assistant-entiteit {{entity}} omschakelen? Hierdoor kan de stroom worden uitgeschakeld als deze momenteel aan staat.`,haToggleWarning:`WAARSCHUWING: "{{name}}" is momenteel aan het afdrukken! Het omschakelen van {{entity}} kan de stroom onderbreken en de afdruk stoppen. Doorgaan?`,haToggleButton:`Omschakelen`},bulk:{select:`Selecteren`,selectAll:`Alles selecteren`,selectByLocation:`Selecteren op locatie`,selected:`{{count}} geselecteerd`,actions:{stop:`Stoppen`,pause:`Pauzeren`,resume:`Hervatten`,clearPlate:`Printbed vrijgeven`,clearHMS:`Meldingen wissen`},confirm:{stopTitle:`{{count}} afdrukken stoppen`,stopMessage:`Hiermee worden actieve afdrukken op {{count}} printer(s) geannuleerd. Deze actie kan niet ongedaan worden gemaakt.`,stopButton:`Alles stoppen`,pauseTitle:`{{count}} afdrukken pauzeren`,pauseMessage:`Hiermee worden actieve afdrukken op {{count}} printer(s) gepauzeerd.`,pauseButton:`Alles pauzeren`,clearPlateTitle:`{{count}} printbedden vrijgeven`,clearPlateMessage:`Hiermee wordt het printbed op {{count}} printer(s) vrijgegeven en kunnen wachtrijtaken worden gestart.`,clearPlateButton:`Alles wissen`},success:`{{action}} voltooid op {{count}} printer(s)`,partial:`{{succeeded}} geslaagd, {{failed}} mislukt`,noneApplicable:`Geen van de geselecteerde printers heeft de juiste status voor deze actie`,selectByState:`Selecteren op status`},discovery:{title:`Printers ontdekken`,searching:`Zoeken...`,scanning:`Scannen...`,scanProgress:`Scannen... {{scanned}}/{{total}}`,foundPrinters:`{{count}} printer(s) gevonden`,noPrintersFound:`Geen printers gevonden`,noPrintersFoundSubnet:`Geen printers gevonden in het opgegeven subnet.`,noPrintersFoundNetwork:`Geen printers gevonden op het netwerk.`,allConfigured:`Alle ontdekte printers zijn al geconfigureerd.`,alreadyAdded:`Al toegevoegd`,select:`Selecteren`,manualEntry:`Handmatige invoer`,addFromCloud:`Toevoegen vanuit cloud`,subnetToScan:`Te scannen subnet`,dockerNote:`Docker gedetecteerd. Voer het subnet van je printer in CIDR-notatie in. Vereist network_mode: host in docker-compose.yml.`,scanSubnet:`Subnet scannen op printers`,discoverNetwork:`Printers op netwerk ontdekken`,scanningSubnet:`Subnet scannen op Bambu-printers...`,scanningNetwork:`Netwerk scannen...`,serialRequired:`Serienummer verplicht`,unknown:`Onbekend`,failedToStart:`Ontdekking starten mislukt`,customSubnetOption:`Aangepast subnet...`,customSubnetLabel:`Aangepast subnet (CIDR)`,customSubnetNote:`Gebruik een aangepast subnet als je printer zich op een ander netwerk bevindt dan deze server. De FTP-poort (990) en MQTT-poort (8883) moeten bereikbaar zijn over de routeringsgrens.`},drying:{start:`Drogen starten`,stop:`Drogen stoppen`,temperature:`Temperatuur`,duration:`Duur`,hours:`uren`,timeRemaining:`{{time}} resterend`,active:`Drogen`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`Drogen niet ondersteund`,powerRequired:`Sluit de AMS-voedingsadapter aan om drogen in te schakelen`,cannotDryNow:`AMS kan op dit moment niet beginnen met drogen`,startingDrying:`Drogen starten...`,toastCommandSent:`Droogopdracht verzonden`,toastStopped:`Drogen gestopt`,toastNotStarted:`De printer heeft de opdracht geaccepteerd, maar de AMS is niet begonnen met drogen. Controleer of de AMS-voedingsadapter is aangesloten en de printer inactief is.`,screenOnly:`AMS-drogen op deze printer kan alleen via het eigen scherm van de printer worden bediend (Bambu-beperking)`,stoppingDrying:`Drogen stoppen...`,rotateTray:`Spoel draaien tijdens drogen`,rotateUnavailableReason:`Niet beschikbaar — een sleuf in deze AMS is naar de toolhead geladen. De spoel wordt door de toevoerbuis geblokkeerd en kan niet draaien. Trek eerst het filament terug.`,startMode:`Starttijd`,modeNow:`Nu`,modeDelay:`Na vertraging`,modeAtTime:`Op tijdstip`,schedule:`Plannen`,scheduledFor:`Drogen gepland voor {{time}}`,scheduledAsap:`Drogen gepland (wachten op printer)`,cancelScheduled:`Gepland drogen annuleren`,scheduleFailed:`Drogen plannen mislukt`,retractFilament:`Trek het filament bij de AMS-uitgang terug om het drogen te starten`,waitingAmsNotFound:`Wachten tot de AMS wordt gedetecteerd`,waitingOffline:`Wachten tot de printer online komt`,waitingPrinterBusy:`Wachten tot de printer vrij is`,waitingAlreadyDrying:`Wachten tot de huidige droogcyclus is voltooid`,waitingInterrupted:`Onderbroken, wordt opnieuw gestart zodra de printer vrij is`,scheduleFailedReason:`Gepland drogen mislukt: {{reason}}`,scheduleFailedUnknown:`Onbekende fout`,dismissFailed:`Negeren`},amsBackup:{titleOn:`AMS Filament Backup staat AAN. Klik om uit te schakelen.`,titleOff:`AMS Filament Backup staat UIT. Klik om in te schakelen.`,titleUnknown:`Status van AMS Filament Backup is niet beschikbaar op deze printer.`,toastEnabled:`AMS Filament Backup ingeschakeld`,toastDisabled:`AMS Filament Backup uitgeschakeld`,modalTitle:`AMS Filament Backup`,modalHelp:`Wanneer de actieve sleuf leeg raakt, doorloopt de printer in deze volgorde alle overeenkomende sleuven met hetzelfde preset en dezelfde kleur.`,modalNoSlots:`Geen filament geladen.`,modalNoPairs:`Geen back-upparen — geen twee sleuven gebruiken hetzelfde filamentprofiel en dezelfde kleur.`,extruderRightShort:`R`,extruderLeftShort:`L`,stateOn:`Ingeschakeld`,stateOff:`Uitgeschakeld`,stateUnknown:`Niet ondersteund op deze printer`},activeJobSlot:{title:`Deze sleuf is filament {{n}} in de actieve afdruk`,ariaLabel:`Actieve afdruksleuf {{n}}`},expectedSlot:{title:`De printer wacht op filament in deze sleuf`,ariaLabel:`Verwachte filamentsleuf {{n}}`,label:`{{ams}} · Sleuf {{slot}}`,external:`Externe spoel`},filaments:`Filamenten`,externalSpool:{hide:`Externe spoel verbergen`,show:`Externe spoel weergeven`},openCameraOverlay:`Camera-overlay openen`,openCameraWindow:`Camera in nieuw venster openen`,firmwareUpdateAvailable:`Firmware-update beschikbaar: {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — up-to-date`,firmwareUpdateButton:`Bijwerken`,plateDetection:{noPermission:`Je hebt geen toestemming om printers bij te werken`,enabledClick:`Plaatcontrole ingeschakeld - Klik om uit te schakelen`,disabledClick:`Plaatcontrole uitgeschakeld - Klik om in te schakelen`,manageCalibration:`Kalibratie voor plaatdetectie beheren`,calibrationRequired:`Kalibratie vereist`,calibrationInstructions:`Zorg dat de bouwplaat <strong>volledig leeg</strong> is en klik daarna op Kalibreren.`,calibrationDescription:`Bij kalibratie wordt een referentiebeeld van de lege plaat vastgelegd. Toekomstige controles vergelijken hiermee om objecten te detecteren.`,calibrationTip:`<strong>Tip:</strong> Je kunt maximaal 5 kalibraties voor verschillende platen opslaan. Het systeem gebruikt bij een controle automatisch de beste overeenkomst.`,plateEmpty:`Plaat lijkt leeg`,objectsDetected:`Objecten op plaat gedetecteerd`,confidence:`Betrouwbaarheid`,difference:`Verschil`,analysisPreview:`Analysevoorbeeld:`,analysisLegend:`Groen kader = detectiegebied, rode overlay = verschillen ten opzichte van kalibratie`,savedReferences:`Opgeslagen referenties ({{count}}/{{max}})`,deleteReference:`Referentie verwijderen`,labelPlaceholder:`Label...`,clickToEdit:`{{label}} - Klik om te bewerken`,clickToAddLabel:`Klik om label toe te voegen`},speed:{title:`Afdruksnelheid`,silent:`Stil (50%)`,standard:`Standaard (100%)`,sport:`Sport (124%)`,ludicrous:`Ludicrous (166%)`},airduct:{title:`Luchtkanaalmodus`,cooling:`Koelen`,heating:`Verwarmen`},noSdCard:`Geen SD`,door:{open:`Open`,closed:`Gesloten`},fans:{partCooling:`Onderdeelkoelventilator`,auxiliary:`Hulpventilator`,leftAuxiliary:`Linker hulpventilator`,exhaust:`Afvoer`,chamber:`Kamerventilator`},clickToViewHmsErrors:`Klik om HMS-fouten te bekijken`,aiDetection:{safe:`Veilig`,warning:`Waarschuwing`,failure:`Mislukking`,idle:`Inactief`,error:`Controleert niet`,unknown:`Bezig met starten`,tooltipError:`AI-storingsdetectie controleert deze print niet: {{reason}} - klik voor details`,tooltipUnknown:`AI-storingsdetectie: wachten op het eerste resultaat - klik voor details`,errorHint:`Deze print wordt niet gecontroleerd. De detectie hervat automatisch zodra het probleem hieronder is opgelost.`,tooltip:`AI-foutdetectie: {{status}} (score {{score}}) - klik voor details`,tooltipIdle:`AI-foutdetectie ingeschakeld - bewaking start bij de volgende afdruk - klik voor details`,modalTitle:`AI-foutdetectie - {{name}}`,currentStatus:`Status`,score:`Score`,framesAnalyzed:`Geanalyseerde frames`,idleHint:`Er wordt momenteel geen afdruk bewaakt. De bewaking start automatisch bij de volgende afdruk.`,lastError:`Laatste fout`,openSettings:`Instellingen openen`},estimatedCompletion:`Geschatte voltooiingstijd`,plateNumber:`Plaat {{number}}`,slotOptions:`Sleufopties`,amsPopup:{friendlyName:`AMS-naam`,friendlyNamePlaceholder:`bijv. AMS-naam`,serialNumber:`Serienummer`,firmwareVersion:`Firmware`,save:`Opslaan`,clear:`Wissen`,noEditPermission:`Je hebt geen toestemming om AMS-eenheden te hernoemen`},firmwareModal:{title:`Firmware-update`,titleUpToDate:`Firmware-informatie`,currentVersion:`Huidig:`,latestVersion:`Nieuwste:`,releaseNotes:`Releaseopmerkingen`,checkingPrereqs:`Vereisten controleren...`,sdCardReady:`SD-kaart gereed. Klik hieronder om firmware te uploaden.`,uploadedSuccess:`Firmware geüpload naar SD-kaart!`,applyInstructions:`Om de update op je printer toe te passen:`,step1:`Ga op het touchscreen van de printer naar <strong>Instellingen</strong>`,step2:`Navigeer naar <strong>Firmware</strong>`,step3:`Selecteer <strong>Update vanaf SD-kaart</strong>`,step4:`De update duurt 10-20 minuten`,done:`Klaar`,starting:`Starten...`,uploadFirmware:`Firmware uploaden`,uploadFailed:`Upload starten mislukt: {{error}}`,uploadedToast:`Firmware geüpload! Start de update vanaf het printerscherm.`,availableVersions:`Beschikbare versies`,usable:`Bruikbaar`,unavailable:`Niet beschikbaar`,installed:`Geïnstalleerd`,newerBadge:`nieuwer`,olderBadge:`ouder`,currentBadge:`huidig`},accessCodePlaceholder:`Laat leeg om huidige waarde te behouden`,roi:{title:`Detectiegebied (ROI)`,xStart:`X-start`,yStart:`Y-start`,width:`Breedte`,height:`Hoogte`,instruction:`Pas het detectiegebied aan zodat het op de bouwplaat is gericht. Het groene kader in het voorbeeld toont het huidige gebied.`},developerModeWarning:`Developer LAN-modus is niet ingeschakeld op: {{names}}. Sommige functies werken mogelijk niet.`,howToEnable:`Inschakelen`,incompatibleFile:`Dit bestand is gesliced voor {{slicedFor}}, maar deze printer is een {{printerModel}}`,dropNotPrintable:`Alleen .gcode- en .gcode.3mf-bestanden kunnen worden afgedrukt`,dropToPrint:`Sleep hierheen om af te drukken`,dropToQueue:`Sleep hierheen voor wachtrij`},archives:{media:{title:`Afdrukvideo's`,download:`Afdrukvideo's downloaden`,searching:`Printer controleren op video's…`,searchFailed:`Printer kon niet op video's worden gecontroleerd.`,none:`Geen timelapse- of IP-camerafragmenten gevonden voor deze afdruk.`,attachedTimelapse:`Gekoppelde timelapse`,printerFiles:`Bestanden die nog op de printer staan`,downloadSelected:`Geselecteerde downloaden`,printerMissing:`Printer is niet meer geconfigureerd`,timelapseUnavailable:`De timelapse-map kon niet worden gelezen`,ipcamUnavailable:`De IP-camera-map kon niet worden gelezen`},title:`Afdrukarchieven`,no3mfBanner:{title:`Sommige recente afdrukken konden niet met miniaturen worden gearchiveerd`,body:`De slicer heeft het .gcode.3mf-bestand niet op de SD-kaart van de printer achtergelaten, waardoor Bambuddy de miniatuur of slicermetadata niet kon ophalen. Dit komt meestal doordat "Verzonden bestanden opslaan op externe opslag" is uitgeschakeld in de slicer (tabblad Apparaat in Bambu Studio / OrcaSlicer).`,docsLink:`Zie installatiestap 4`,dismissLabel:`Deze melding sluiten`,docsLinkInternalStorage:`Waarom dit gebeurt`,titleInternalStorage:`Sommige recente afdrukken bleven op de interne opslag van de printer staan`,bodyInternalStorage:`Bambu Studio plaatste het geslicede bestand op de interne opslag van de printer in plaats van op de kaart, waardoor Bambuddy via FTP niets kon uitlezen. Op H2-serie, P2S en X2D doet de knop Afdrukken dit altijd — alleen Verzenden biedt een keuze, en ook daar is Cache standaard. Die afdrukken worden nog steeds gearchiveerd met naam en timing, maar zonder miniatuur of slicermetadata. Voor volledige archieven start je de afdruk vanuit Bambuddy, slice je in OrcaSlicer, of gebruik je in Bambu Studio Verzenden met Extern geselecteerd en start je daarna de afdruk. Voor al deze opties is een kaart of USB-stick in de printer nodig.`,titleNoExternalStorage:`Sommige recente afdrukken konden niet worden gearchiveerd — geen opslag in de printer`,bodyNoExternalStorage:`De printer meldt dat er geen kaart of USB-stick in de sleuf zit, waardoor het geslicede bestand nergens kon worden opgeslagen en Bambuddy niets kon uitlezen. Plaats er een en de volgende afdruk wordt volledig gearchiveerd.`,titleInternalHistory:`Sommige recente prints zijn gestart vanaf een bestand dat al op de printer stond`,bodyInternalHistory:`Die prints liepen vanuit de eigen bibliotheek van de printer — opnieuw afdrukken via het scherm, starten vanuit Handy, of een bestand dat eerder is verstuurd en later is afgedrukt. Bambuddy leest printbestanden via FTP, dat alleen de kaart of stick aanbiedt, terwijl de printer die bibliotheek bewaart op een plek die FTP niet kan bereiken. Er was dus geen 3MF om te lezen. Geen enkele slicer-instelling verandert dit, omdat er voor deze prints niets is verstuurd. Ze worden nog steeds gearchiveerd met naam en tijden, en via Archief bewerken kun je het gebruikte filament handmatig invullen. Start de print vanuit Bambuddy of vanuit je slicer voor een volledig archief.`,titleFtpsCooloff:`Sommige recente prints konden niet worden gearchiveerd — de printer weigerde de bestandsverbinding`,bodyFtpsCooloff:`Bambuddy opende de bestandsoverdrachtspoort van de printer (FTPS 990) en de printer antwoordde met iets dat geen TLS is, waardoor er niets van te lezen viel. Die prints staan nog wel in het archief met hun naam en tijden, alleen zonder miniatuur of slicer-metadata. Dit is geen slicer-instelling en niets wat u hebt gewijzigd — dezelfde modellen en firmware draaien normaal op andere installaties, en een getroffen printer werkt later meestal vanzelf weer. Na zo'n fout pauzeert Bambuddy de overdrachten naar die printer vijf minuten en haalt het bestand daarna alsnog op, dus een korte episode herstelt zichzelf; een kaart die leeg blijft betekent dat de weigering langer duurde dan de herhaalpoging. Wat het veroorzaakt is nog niet bekend. Blijft het gebeuren, zet dan debug-logging aan op de pagina Systeem en voeg een supportpakket bij uw melding.`,titleFtpTransferFailed:`Sommige recente prints konden niet worden gearchiveerd — de bestandsoverdracht duurde te lang`,bodyFtpTransferFailed:`Het gesliced bestand stond op de kaart van de printer en de printer leverde het ook aan, maar de overdracht was niet binnen de toegestane tijd klaar. Bij de start van een print bedient de printer ook zijn camera, zijn statusberichten en de upload van de opdracht, en een grote 3MF komt daar niet altijd doorheen. Die prints zijn nog steeds gearchiveerd met naam en tijden, alleen zonder miniatuur of slicergegevens. Dit is geen slicerinstelling en niets dat u hebt gewijzigd. Bambuddy haalt het bestand in de tien minuten daarna nog drie keer op, dus de meeste gevallen lossen zichzelf op; een kaart die leeg blijft betekent dat ook al die pogingen te lang duurden. Als het vaker gebeurt, verhoog dan Verbindingstime-out onder Instellingen > Netwerk > FTP opnieuw proberen.`},searchPlaceholder:`Archieven zoeken...`,filterByPrinter:`Filteren op printer`,filterByStatus:`Filteren op status`,sortBy:`Sorteren op`,sortNewest:`Nieuwste eerst`,sortOldest:`Oudste eerst`,sortName:`Naam`,sortDuration:`Duur`,sortLargest:`Grootste eerst`,sortSmallest:`Kleinste eerst`,sortSize:`Grootte`,noArchives:`Geen archieven gevonden`,noArchivesSearch:`Geen archieven komen overeen met je zoekopdracht`,originalPrintNotVisible:`Originele afdruk niet zichtbaar - probeer filters te wissen`,noArchivesYet:`Nog geen archieven`,prints:`afdrukken`,pagination:{showing:`Weergegeven`,to:`tot`,of:`van`,show:`Tonen`,page:`Pagina`,all:`Alle`},loadingArchives:`Archieven laden...`,releaseToUpload:`Loslaten om te uploaden`,showAll:`Alles tonen`,showFavoritesOnly:`Alleen favorieten tonen`,gridView:`Rasterweergave`,listView:`Lijstweergave`,calendarView:`Kalenderweergave`,logView:`Afdruklogboek`,manageTags:`Tags beheren`,showFailedPrints:`Mislukte afdrukken tonen`,hideFailedPrints:`Mislukte afdrukken verbergen`,hideDuplicates:`Duplicaten verbergen`,viewOriginalPrint:`Klik om originele afdruk te bekijken (#{{id}})`,printTime:`Afdruktijd`,filamentUsed:`Filament gebruikt`,cost:`Kosten`,preview:`Voorbeeld`,deleteArchive:`Archief verwijderen`,deleteConfirm:`Weet je zeker dat je dit archief wilt verwijderen?`,favorite:`Favoriet`,unfavorite:`Uit favorieten verwijderen`,viewDetails:`Details bekijken`,status:{completed:`Voltooid`,failed:`Mislukt`,stopped:`Gestopt`},toast:{source3mfAttached:`Bron-3MF gekoppeld: {{filename}}`,failedUploadSource3mf:`Uploaden van bron-3MF mislukt`,source3mfRemoved:`Bron-3MF verwijderd`,failedRemoveSource3mf:`Verwijderen van bron-3MF mislukt`,f3dAttached:`F3D gekoppeld: {{filename}}`,failedUploadF3d:`Uploaden van F3D mislukt`,f3dRemoved:`F3D verwijderd`,failedRemoveF3d:`Verwijderen van F3D mislukt`,timelapseAttached:`Timelapse gekoppeld: {{filename}}`,timelapseAlreadyAttached:`Timelapse is al gekoppeld`,noMatchingTimelapse:`Geen overeenkomende timelapse gevonden`,failedScanTimelapse:`Scannen naar timelapse mislukt`,failedAttachTimelapse:`Timelapse koppelen mislukt`,timelapseRemoved:`Timelapse verwijderd`,failedRemoveTimelapse:`Timelapse verwijderen mislukt`,timelapseUploaded:`Timelapse geüpload: {{filename}}`,failedUploadTimelapse:`Timelapse uploaden mislukt`,archiveDeleted:`Archief verwijderd`,failedDeleteArchive:`Archief verwijderen mislukt`,addedToFavorites:`Toegevoegd aan favorieten`,removedFromFavorites:`Uit favorieten verwijderd`,projectUpdated:`Project bijgewerkt`,failedUpdateProject:`Project bijwerken mislukt`,linkCopied:`Link naar klembord gekopieerd`,failedCopyLink:`Link kopiëren mislukt`,photoDeleted:`Foto verwijderd`,failedDeletePhoto:`Foto verwijderen mislukt`,failedDeleteArchives:`Archieven verwijderen mislukt`,failedUpdateFavorites:`Favorieten bijwerken mislukt`,exportDownloaded:`Export gedownload`,exportFailed:`Export mislukt`},menu:{print:`Afdrukken`,openInBambuStudio:`Openen in slicer`,slice:`Slicen`,externalLink:`Externe link`,viewOnMakerWorld:`Bekijken op MakerWorld`,preview3d:`3D-voorbeeld`,viewTimelapse:`Timelapse bekijken`,scanForTimelapse:`Zoeken naar timelapse`,uploadTimelapse:`Timelapse uploaden`,removeTimelapse:`Timelapse verwijderen`,downloadSource3mf:`Bron-3MF downloaden`,uploadSource3mf:`Bron-3MF uploaden`,replaceSource3mf:`Bron-3MF vervangen`,removeSource3mf:`Bron-3MF verwijderen`,uploadF3d:`F3D uploaden`,replaceF3d:`F3D vervangen`,downloadF3d:`F3D downloaden`,removeF3d:`F3D verwijderen`,download:`Downloaden`,copyDownloadLink:`Downloadlink kopiëren`,qrCode:`QR-code`,viewPhotos:`Foto's bekijken`,viewPhotosCount:`Foto's bekijken ({{count}})`,projectPage:`Projectpagina`,addToFavorites:`Toevoegen aan favorieten`,removeFromFavorites:`Uit favorieten verwijderen`,edit:`Bewerken`,printLog:`Afdruklogboek`,goToProject:`Ga naar project: {{name}}`,addToProject:`Toevoegen aan project`,removeFromProject:`Uit project verwijderen`,loading:`Laden...`,noProjectsAvailable:`Geen projecten beschikbaar`,searchProjects:`Projecten zoeken…`,select:`Selecteren`,deselect:`Deselecteren`,delete:`Verwijderen`},permission:{noReprint:`Je hebt geen toestemming om dit archief opnieuw af te drukken`,noAddToQueue:`Je hebt geen toestemming om aan de wachtrij toe te voegen`,noUpdateArchives:`Je hebt geen toestemming om archieven bij te werken`,noUploadFiles:`Je hebt geen toestemming om bestanden te uploaden`,noDownload:`Je hebt geen toestemming om archieven te downloaden`,noCopyLink:`Je hebt geen toestemming om downloadlinks te kopiëren`,noDelete:`Je hebt geen toestemming om dit archief te verwijderen`,noEdit:`Je hebt geen toestemming om dit item te bewerken`,noCreate:`Je hebt geen toestemming om archieven te maken`},platePicker:{title:`Selecteer plaat voor voorbeeld`,hint:`Dit archief bevat meerdere platen. Kies er een om in de GCode-viewer te openen.`,plateLabel:`Plaat {{index}}`,objectCount:`{{count}} object`,objectCount_plural:`{{count}} objecten`,noGcode:`Dit archief bevat geen geslicede G-code voor een voorbeeld. Open het eerst in Bambu Studio om te slicen.`},card:{previousPlate:`Vorige plaat`,nextPlate:`Volgende plaat`,plateNumber:`Plaat {{index}}`,moreOptions:`Klik met rechts voor meer opties`,addToFavorites:`Toevoegen aan favorieten`,removeFromFavorites:`Uit favorieten verwijderen`,cancelled:`geannuleerd`,failed:`mislukt`,duplicate:`duplicaat`,duplicateTitle:`Dit model is eerder afgedrukt`,openSource3mf:`Bron-3MF openen in Bambu Studio (klik met rechts voor meer opties)`,downloadF3d:`Fusion 360-ontwerpbestand downloaden`,viewTimelapse:`Timelapse bekijken`,viewPhoto:`1 foto bekijken`,viewPhotos:`{{count}} foto's bekijken`,openFolder:`Map openen: {{name}}`,slicedFile:`Gesliced bestand - klaar om af te drukken`,sourceFile:`Alleen bronbestand - geen AMS-toewijzing beschikbaar`,gcode:`GCODE`,source:`BRON`,project:`Project: {{name}}`,runsBadge:`{{count}} afdrukken`,runsBadgeTitle:`{{count}} afdrukken totaal — {{successful}} geslaagd, {{failed}} mislukt. Klik om het volledige afdruklogboek te bekijken.`,estimated:`Geschat: {{time}}`,actual:`Werkelijk: {{time}}`,accuracy:`Nauwkeurigheid: {{percent}}%`,filament:`{{weight}}g`,layer:`{{count}} laag`,layers:`{{count}} lagen`,object:`{{count}} object`,objects:`{{count}} objecten`,slicedFor:`Gesliced voor {{model}}`,uploadedBy:`Geüpload door`,noPermissionReprint:`Je hebt geen toestemming om opnieuw af te drukken`,noFileForReprint:`Geen 3MF-bestand beschikbaar — het bestand kon niet van de printer worden gedownload toen de afdruk werd geregistreerd`,slicerAmsMapping:`AMS-toewijzing opgeslagen ({{printer}})`,slicerAmsMappingTooltip:`De eigen AMS-sleufkeuze van de slicer is opgeslagen voor {{printer}}. Tray-nummers hebben alleen betekenis op die printer, dus bij opnieuw afdrukken worden ze alleen hergebruikt als opnieuw naar {{printer}} wordt afgedrukt.`,noPermissionEdit:`Je hebt geen toestemming om archieven te bewerken`,noPermissionDelete:`Je hebt geen toestemming om archieven te verwijderen`,openInBambuStudio:`Openen in slicer`,openInBambuStudioToSlice:`Openen in slicer om te slicen`,slice:`Slicen`,externalLink:`Externe link`,makerWorld:`MakerWorld: {{designer}}`,viewProject:`Project bekijken`,noExternalLink:`Geen externe link`,preview3d:`3D-voorbeeld`,download:`Downloaden`,edit:`Bewerken`,delete:`Verwijderen`},runLog:{title:`Afdruklogboek`,modalTitle:`Afdruklogboek — {{name}}`,modalTitleFallback:`dit archief`,empty:`Nog geen afdrukgebeurtenissen geregistreerd voor dit archief.`,col:{date:`Datum`,status:`Status`,duration:`Duur`,filament:`Filament`,cost:`Kosten`},status:{completed:`Voltooid`,failed:`Mislukt`,cancelled:`Geannuleerd`,stopped:`Gestopt`,skipped:`Overgeslagen`,printing:`Bezig met afdrukken`}},modal:{deleteArchive:`Archief verwijderen`,deleteConfirm:`Weet je zeker dat je "{{name}}" wilt verwijderen? Deze actie kan niet ongedaan worden gemaakt.`,deleteButton:`Verwijderen`,deletePurgeStats:`Deze afdruk ook verwijderen uit Snelle statistieken (filament, tijd, kosten, energie)`,deleteQueueItemsWarning:`{{count}} wachtrij-item(s) gekoppeld aan dit archief worden ook verwijderd.`,deleteBlockedByPrinting:`Kan niet verwijderen — {{count}} wachtrij-item(s) zijn momenteel aan het afdrukken. Stop eerst de afdruk en probeer het daarna opnieuw.`,removeSource3mf:`Bron-3MF verwijderen`,removeSource3mfConfirm:`Weet je zeker dat je het bron-3MF-bestand uit "{{name}}" wilt verwijderen? Hiermee wordt het originele slicerprojectbestand verwijderd.`,removeButton:`Verwijderen`,removeF3d:`F3D verwijderen`,removeF3dConfirm:`Weet je zeker dat je het Fusion 360-ontwerpbestand uit "{{name}}" wilt verwijderen?`,removeTimelapse:`Timelapse verwijderen`,removeTimelapseConfirm:`Weet je zeker dat je de timelapsevideo uit "{{name}}" wilt verwijderen?`,timelapse:`{{name}} - Timelapse`,selectTimelapse:`Timelapse selecteren`,selectTimelapseDesc:`Geen automatische overeenkomst gevonden. Selecteer de timelapse voor deze afdruk:`,deleteArchives:`Archieven verwijderen`,deleteArchivesConfirm:`Weet je zeker dat je {{count}} archief/archieven wilt verwijderen? Deze actie kan niet ongedaan worden gemaakt.`,deleteCount:`{{count}} verwijderen`},page:{title:`Archieven`,printsCount:`{{filtered}} van {{total}} afdrukken`,dropFilesHere:`Sleep .3mf-bestanden hierheen`,releaseToUpload:`Loslaten om te uploaden`,only3mfSupported:`Alleen .3mf-bestanden worden ondersteund`,close:`Sluiten`,selected:`{{count}} geselecteerd`,selectAll:`Alles selecteren`,tags:`Tags`,project:`Project`,favorite:`Favoriet`,delete:`Verwijderen`,toggledFavorites:`Favorieten omgeschakeld voor {{count}} archief/archieven`,failedUpdateFavorites:`Favorieten bijwerken mislukt`,archivesDeleted:`{{count}} archief/archieven verwijderd`,failedDeleteArchives:`Archieven verwijderen mislukt`,photoDeleted:`Foto verwijderd`,failedDeletePhoto:`Foto verwijderen mislukt`},list:{name:`Naam`,printer:`Printer`,date:`Datum`,size:`Grootte`,actions:`Acties`,hasTimelapse:`Heeft timelapse`},log:{date:`Datum`,printName:`Afdruknaam`,printer:`Printer`,user:`Gebruiker`,status:`Status`,duration:`Duur`,filament:`Filament`,filamentUsed:`Filament gebruikt`,cost:`Kosten`,energy:`Energie`,energyCost:`Energiekosten`,completedAt:`Voltooid`,columns:`Kolommen`,sortBy:`Sorteren op {{column}}`,allPrinters:`Alle printers`,allUsers:`Alle gebruikers`,allStatuses:`Alle statussen`,cancelled:`Geannuleerd`,skipped:`Overgeslagen`,dateFrom:`Van`,dateTo:`Tot`,noEntries:`Geen afdruklogboekitems gevonden`,showing:`{{count}} van {{total}} items weergegeven`,rowsPerPage:`Rijen`,page:`Pagina`,prev:`Vorige`,next:`Volgende`,clearLog:`Logboek wissen`,clearLogTitle:`Afdruklogboek wissen`,clearLogConfirm:`Alle items in het afdruklogboek worden permanent verwijderd. Archieven en wachtrij-items blijven intact. Deze actie kan niet ongedaan worden gemaakt. Weet je het zeker?`,clearLogButton:`Alles wissen`,cleared:`{{count}} logboekitems gewist`,clearFailed:`Afdruklogboek wissen mislukt`,deleteEntryTitle:`Afdruklogboekitem verwijderen`,deleteEntryConfirm:`Dit item wordt uit het logboek verwijderd en de bijdragen aan filament, tijd en kosten verdwijnen uit Snelle statistieken. Het bijbehorende archief (indien aanwezig) blijft intact. Deze actie kan niet ongedaan worden gemaakt.`,entryDeleted:`Afdruklogboekitem verwijderd`,entryDeleteFailed:`Afdruklogboekitem verwijderen mislukt`,editEntryTitle:`Afdruklogboekitem bewerken`,editEntryDescription:`Classificeer deze afdrukrun. De widget Foutenanalyse groepeert op deze waarden, zodat wijzigingen direct in de statistieken worden verwerkt.`,entryUpdated:`Afdruklogboekitem bijgewerkt`,entryUpdateFailed:`Afdruklogboekitem bijwerken mislukt`,statuses:{completed:`Voltooid`,failed:`Mislukt`,stopped:`Gestopt`,cancelled:`Geannuleerd`,skipped:`Overgeslagen`}}},dispatchToast:{untitled:`Afdruktaak`,startingPrints:`Afdrukken starten`,progressSummary:`{{complete}}/{{total}} voltooid • Verwerken: {{processing}}`,expandDetails:`Verzenddetails uitklappen`,collapseDetails:`Verzenddetails inklappen`,awaitingPrinter:`Wachten op printer…`,status:{processing:`Verwerken`,completed:`Voltooid`,failed:`Mislukt`},failed:{generic:`Verzenden mislukt`,upload_failed:`Uploaden naar printer mislukt`,start_command_failed:`Printer heeft startopdracht geweigerd`},dismiss:`Negeren`},pipelineRuns:{title:`Pipeline-runs`,loading:`Laden…`,empty:`Nog geen pipeline-runs.`,filter:{pipeline:`Pipeline`,status:`Status`,target:`Doel`,all:`Alle`,allPipelines:`Alle pipelines`,allStatus:`Alle statussen`,allTargets:`Alle doelen`,clear:`Filters wissen`,noMatches:`Geen runs komen overeen met de huidige filters.`},totalCount_one:`{{n}} run`,totalCount_other:`{{n}} runs`,copies:`{{n}} kopieën`,failedCount:`{{n}} mislukt`,copyN:`Kopie {{n}}`,retryFailed:`Mislukte opnieuw proberen`,retryOf:`herhaling van #{{n}}`,pagination:`{{start}}–{{end}} van {{total}}`,cancelledByUser:`Geannuleerd door gebruiker`,toast:{cancelled:`Run geannuleerd`,cancelFailed:`Annuleren mislukt`,retryStarted:`Opnieuw proberen gestart`,retryFailed:`Mislukte opnieuw proberen`,cleared:`{{n}} runs gewist`,clearFailed:`Wissen mislukt`},clearLog:`Logboek wissen`,clearConfirmTitle:`Logboek wissen?`,clearConfirmBody:`Alle voltooide, mislukte, geannuleerde en gedeeltelijk mislukte pipeline-runs verwijderen? Lopende runs blijven behouden. Dit kan niet ongedaan worden gemaakt.`,clearConfirmAction:`Wissen`,jobStatus:{pending:`in afwachting`,awaiting_printer:`wachten op printer`,queued:`in wachtrij`,printing:`bezig met afdrukken`,completed:`voltooid`,failed:`mislukt`,cancelled:`geannuleerd`}},queue:{title:`Afdrukwachtrij`,subtitle:`Plan en beheer je afdruktaken`,filamentShort:{rowBadge:`Onvoldoende filament op de toegewezen spoel`,rowTooltip:`De verzendscheduler heeft dit item gemarkeerd. Klik op Afspelen om het tekort per sleuf te bekijken en te bepalen of je toch wilt afdrukken.`,confirmTitle:`Onvoldoende filament`,confirmIntro:`De toegewezen spoel kan minstens één sleuf niet voorzien. Toch afdrukken?`,lineItem:`Sleuf {{slot}}: vereist {{required}} g, {{remaining}} g resterend`,unknown:`onbekend`,printAnyway:`Toch afdrukken`},slicerAmsMapping:{rowBadge:`AMS-sleuven opgeslagen voor deze printer`,rowTooltip:`Dit archief bevat de exacte AMS-sleuven die de slicer heeft gekozen, opgeslagen voor de printer waarop dit item is gericht. Bij opnieuw afdrukken op deze printer kunnen die trays worden hergebruikt in plaats van opnieuw op type en kleur te matchen.`},editQueueItem:`Wachtrij-item bewerken`,selectAllPlates:`Alle {{count}} platen selecteren`,deselectAll:`Alles deselecteren`,printQueued:`Afdruk in wachtrij geplaatst`,printQueuedWillStartWhenIdle:`Start zodra de printer inactief is`,itemsQueued:`{{count}} items in wachtrij`,sending:`Verzenden...`,sendingProgress:`{{current}}/{{total}} verzenden...`,adding:`Toevoegen...`,addingProgress:`{{current}}/{{total}} toevoegen...`,savingProgress:`{{current}}/{{total}} opslaan...`,clearQueue:`Wachtrij wissen`,clearHistory:`Geschiedenis wissen`,emptyQueue:`Wachtrij is leeg`,position:`Positie`,scheduledTime:`Geplande tijd`,moveUp:`Omhoog verplaatsen`,moveDown:`Omlaag verplaatsen`,startNow:`Nu starten`,printingInProgress:`Afdrukken bezig...`,viewArchive:`Archief bekijken`,viewInFileManager:`Bekijken in Bestandsbeheer`,itemCount:`{{count}} item`,itemCount_plural:`{{count}} items`,dragToReorder:`Sleep om volgorde te wijzigen (alleen ZSM)`,reorderHint:`Positie heeft alleen invloed op ZSM-items. Geplande items draaien op hun ingestelde tijd.`,sjf:{label:`SJF`,tooltip:`Shortest Job First — scheduler geeft voorrang aan kortere afdrukken`},addedBy:`Toegevoegd door {{name}}`,nextInQueue:`Volgende in wachtrij`,clearPlateSuccess:`Plaat vrijgegeven — klaar voor volgende afdruk`,plateNumber:`Plaat {{index}}`,quantity:`Aantal`,quantityHint:`Maakt {{count}} wachtrij-items`,plateQuantityLabel:`Runs van {{plate}}`,plateQuantityTotal_one:`{{count}} run in totaal`,plateQuantityTotal_other:`{{count}} runs in totaal`,batchOrders:{title:`Batchorders`,emptyTitle:`Geen batchorders`,emptyDescription:`Plaats een bestand met meerdere platen, of meer dan één kopie van een plaat, in de wachtrij en de order verschijnt hier met de voortgang.`,filter:{active:`Actief`,completed:`Voltooid`,cancelled:`Geannuleerd`,all:`Alle`},status:{active:`Actief`,completed:`Voltooid`,cancelled:`Geannuleerd`},noTargets:`Alleen groepering`,noTargetsHint:`Aangemaakt voordat doelen per plaat bestonden, dus dit volgt de runs die in de wachtrij zijn gezet in plaats van een doel.`,dispatchRemaining:`{{count}} resterende in wachtrij plaatsen`,dispatchPlate:`Resterende in wachtrij plaatsen`,strandedPlate:`Geen instellingen meer om van te kopiëren`,strandedNotice:`Kan {{runs}} van de {{owed}} nog openstaande runs niet in de wachtrij zetten: die plaat heeft geen run in de wachtrij of voltooide run meer om instellingen van te kopiëren. Zet de plaat één keer vanuit het bestand in de wachtrij, of annuleer de order.`,dispatched:`Resterende runs voor {{name}} in wachtrij geplaatst`,plateProgress:`{{completed}} van {{target}} klaar`,remaining:`{{count}} nog te doen`,failed:`{{count}} mislukt`,printing:`{{count}} bezig met afdrukken`,wholeFile:`Hele bestand`,due:`Vervalt {{date}}`,costSoFar:`{{amount}} tot nu toe`,costRemaining:`({{amount}} te gaan)`},activeBatches:`Actieve batches`,batchProgress:`{{completed}} van {{total}} voltooid`,cancelBatch:`Resterende annuleren`,batchCancelled:`Resterende batchitems geannuleerd`,cancelBatchConfirmTitle:`Batch annuleren`,cancelBatchConfirmMessage:`Alle resterende openstaande items in deze batch annuleren?`,batch:{defaultName:`Batch`,label:`{{count}} item`,label_plural:`{{count}} items`,pendingCount:`{{count}} in afwachting`,pendingCount_plural:`{{count}} in afwachting`,expand:`Batch uitklappen`,collapse:`Batch inklappen`,groupAsBatch:`Als batch groeperen…`,groupAsBatchDescription:`Combineer de {{count}} geselecteerde items tot één inklapbare batch.`,nameLabel:`Batchnaam`,namePlaceholder:`bijv. Vrijdagcadeaus`,create:`Batch maken`,ungroup:`Groepering opheffen`,ungroupConfirmTitle:`Batchgroepering opheffen?`,ungroupConfirmMessage:`De items blijven in de wachtrij staan, maar worden niet langer als groep weergegeven.`,dragGroup:`Groep slepen`},tabs:{batches:`Batches`,queue:`Wachtrij`,history:`Geschiedenis`,timeline:`Tijdlijn`,pipelines:`Pipelines`},layout:{flatList:`Lijst`,byPrinter:`Per printer`,groupByPrinter:`Groeperen per printer`},history:{emptyTitle:`Nog geen geschiedenis`,emptyDescription:`Voltooide, geannuleerde en mislukte afdrukken verschijnen hier.`,showMore:`Meer tonen`,showingCount:`{{shown}} van {{total}} weergegeven`},dragGhost:{multiCount:`{{count}} items`,batch:`{{name}} ({{count}} kopie)`,batch_plural:`{{name}} ({{count}} kopieën)`},sections:{currentlyPrinting:`Momenteel aan het afdrukken`,queued:`In wachtrij`,history:`Geschiedenis`},status:{pending:`In afwachting`,waiting:`Wachten`,printing:`Bezig met afdrukken`,paused:`Gepauzeerd`,completed:`Voltooid`,failed:`Mislukt`,skipped:`Overgeslagen`,cancelled:`Geannuleerd`},summary:{printing:`Bezig met afdrukken`,queued:`In wachtrij`,totalTime:`Totale wachtrijtijd`,totalWeight:`Totaal wachtrijgewicht`,history:`Geschiedenis`},filter:{allPrinters:`Alle printers`,unassigned:`Niet toegewezen`,allStatus:`Alle statussen`,allLocations:`Alle locaties`,any:`Elke`},sort:{byPosition:`Sorteren op positie`,byName:`Sorteren op naam`,byPrinter:`Sorteren op printer`,bySchedule:`Sorteren op planning`,byDate:`Sorteren op datum`,ascendingOldest:`Oplopend (oudste eerst)`,descendingNewest:`Aflopend (nieuwste eerst)`},badges:{staged:`Gereed voor handmatige start`,requiresPrevious:`Vereist dat vorige taak slaagt`,autoPowerOff:`Automatisch uitschakelen`,gcodeInjection:`G-code`},empty:{title:`Geen afdrukken gepland`,description:`Plan een afdruk vanaf de pagina Archieven met de optie "Plannen" in het contextmenu, of sleep bestanden hierheen om te beginnen.`},time:{etaIfStartedNow:`Voltooiingstijd als deze taak nu zou starten`,whenFree:`Zodra een printer vrij is`,overdue:`Te laat`,now:`Nu`,lessThanMinute:`Binnen een minuut`,inMinutes:`Over {{count}} min`,inHours:`Over {{count}} uur`},actions:{startPrint:`Afdruk starten`,stopPrint:`Afdruk stoppen`,requeue:`Opnieuw in wachtrij plaatsen`},bulkEdit:{title:`{{count}} item bewerken`,title_plural:`{{count}} items bewerken`,description:`Alleen gewijzigde instellingen worden toegepast op de geselecteerde items.`,printer:`Printer`,noChange:`— Geen wijziging —`,queueOptions:`Wachtrijopties`,staged:`Gereed voor handmatige start`,autoPowerOff:`Automatisch uitschakelen na afdruk`,requirePrevious:`Vereis dat vorige taak slaagt`,gcodeInjection:`G-code injecteren`,printOptions:`Afdrukopties`,bedLevelling:`Bednivellering`,flowCalibration:`Flowkalibratie`,vibrationCalibration:`Trillingskalibratie`,layerInspection:`Inspectie eerste laag`,timelapse:`Timelapse`,useAms:`AMS gebruiken`,nozzleOffsetCali:`Nozzle-offsetkalibratie`,applyChanges:`Wijzigingen toepassen`,selectAll:`Alles selecteren`,deselectAll:`Alles deselecteren`,selected:`{{count}} geselecteerd`,editSelected:`Geselecteerde bewerken`,cancelSelected:`Geselecteerde annuleren`},confirm:{cancelTitle:`Geplande afdruk annuleren`,cancelMessage:`Weet je zeker dat je "{{name}}" wilt annuleren?`,stopTitle:`Afdruk stoppen`,stopMessage:`Weet je zeker dat je de huidige afdruk "{{name}}" wilt stoppen? Hiermee wordt de afdruktaak op de printer geannuleerd.`,removeTitle:`Uit geschiedenis verwijderen`,removeMessage:`Weet je zeker dat je "{{name}}" uit de wachtrijgeschiedenis wilt verwijderen?`,clearHistoryTitle:`Geschiedenis wissen`,clearHistoryMessage:`Weet je zeker dat je alle {{count}} item(s) uit de geschiedenis wilt verwijderen?`,cancelButton:`Afdruk annuleren`,stopButton:`Afdruk stoppen`,thisPrint:`deze afdruk`,thisItem:`dit item`},toast:{cancelled:`Wachtrij-item geannuleerd`,cancelFailed:`Item annuleren mislukt`,removed:`Wachtrij-item verwijderd`,keptForOrder:`Geannuleerd in plaats van verwijderd: dit is de enige run waaruit de batchorder deze plaat opnieuw in de wachtrij kan zetten`,historyKeptForOrders:`{{kept}} bewaard die batchorders nog nodig hebben.`,removeFailed:`Item verwijderen mislukt`,stopped:`Afdruk gestopt`,stopFailed:`Afdruk stoppen mislukt`,released:`Afdruk vrijgegeven aan wachtrij`,startFailed:`Afdruk starten mislukt`,reorderFailed:`Wachtrij herschikken mislukt`,historyCleared:`{{count}} geschiedenisitem(s) gewist`,clearHistoryFailed:`Geschiedenis wissen mislukt`,updateFailed:`Items bijwerken mislukt`,bulkCancelled:`{{count}} item(s) geannuleerd`,bulkCancelFailed:`Items annuleren mislukt`,batchCreated:`Batch "{{name}}" gemaakt`,batchCreateFailed:`Batch maken mislukt`,batchUngrouped:`Groepering van {{count}} item(s) opgeheven`,batchUngroupFailed:`Batchgroepering opheffen mislukt`,resumedAfterFailure:`Wachtrij hervat — {{restored}} taak/taken teruggezet naar in afwachting`,resumeAfterFailureFailed:`Wachtrij hervatten mislukt`},resumeAfterFailure:{banner:`{{printer}} is geblokkeerd door een eerdere afdrukfout — {{count}} taak/taken overgeslagen`,bannerHint:`Los het printerprobleem op en hervat daarna om de overgeslagen taken terug te zetten en de blokkering op te heffen.`,button:`Hervatten na fout`,confirmTitle:`Wachtrij hervatten na fout?`,confirmMessage:`Zet {{count}} overgeslagen taak/taken op {{printer}} terug naar in afwachting en hef de blokkering door de vorige afdruk op. Zorg dat de printer gereed is voordat je doorgaat.`},timeline:{listView:`Lijst`,timelineView:`Tijdlijn`,unassigned:`Niet toegewezen`,noData:`Geen geplande afdrukken voor deze dag`,nothingCommitted:`Geen vastgelegde planningen in dit venster. Gereedstaande items, wachtende items en ZSM-taken op inactieve printers worden niet getoond — stel een geplande tijd in of geef een gereedstaand item vrij om het hier te zien.`,allDoneBy:`Alle afdrukken naar verwachting klaar om {{time}}`,staged:`Gereed voor handmatige start`,filterAll:`Alles tonen`,filterPrinting:`Bezig met afdrukken`,filterQueued:`In wachtrij`,time:{anyMoment:`elk moment`,minutesLeft:`{{minutes}}m resterend`,hoursLeft:`{{hours}}u resterend`,hoursMinutesLeft:`{{hours}}u {{minutes}}m resterend`},day:{previous:`Vorige dag`,next:`Volgende dag`,today:`Vandaag`},window:{back12h:`12 uur terug`,forward12h:`12 uur vooruit`,now:`Nu`},printerColumnHeader:`Printer`},permissions:{noStopPrint:`Je hebt geen toestemming om afdrukken te stoppen`,noStartPrint:`Je hebt geen toestemming om afdrukken te starten`,noEdit:`Je hebt geen toestemming om dit wachtrij-item te bewerken`,noCancel:`Je hebt geen toestemming om dit wachtrij-item te annuleren`,noRequeue:`Je hebt geen toestemming om items opnieuw in de wachtrij te plaatsen`,noRemove:`Je hebt geen toestemming om dit wachtrij-item te verwijderen`,noClearHistory:`Je hebt geen toestemming om de volledige geschiedenis te wissen`,noEditItems:`Je hebt geen toestemming om wachtrij-items te bewerken`,noCancelItems:`Je hebt geen toestemming om wachtrij-items te annuleren`}},stats:{title:`Statistieken`,subtitle:`Sleep widgets om ze opnieuw te rangschikken. Klik op het oogpictogram om te verbergen.`,overview:`Overzicht`,totalPrints:`Totaal aantal afdrukken`,successRate:`Slagingspercentage`,totalPrintTime:`Totale afdruktijd`,printTime:`Afdruktijd`,totalFilament:`Totaal filamentverbruik`,filamentUsed:`Filament gebruikt`,filamentCost:`Filamentkosten`,totalCost:`Totale kosten`,energyUsed:`Energieverbruik`,energyCost:`Energiekosten`,energyWarmingUpTooltip:`Energietracking verzamelt nog steeds uurlijkse momentopnamen. Totalen over een datumbereik worden nauwkeurig zodra er minstens één momentopname van vóór het geselecteerde bereik bestaat. Vroege waarden kunnen te laag uitvallen.`,averagePrintTime:`Gemiddelde afdruktijd`,printsPerDay:`Afdrukken per dag`,byPrinter:`Per printer`,printsByPrinter:`Afdrukken per printer`,byMaterial:`Per materiaal`,byMonth:`Per maand`,last7Days:`Laatste 7 dagen`,last30Days:`Laatste 30 dagen`,last90Days:`Laatste 90 dagen`,allTime:`Altijd`,quickStats:`Snelle statistieken`,printActivity:`Afdrukactiviteit`,filamentTypes:`Filamenttypen`,filamentTrends:`Filamenttrends`,failureAnalysis:`Foutenanalyse`,timeAccuracy:`Tijdnauwkeurigheid`,successful:`Geslaagd:`,failed:`Mislukt:`,cancelled:`Geannuleerd:`,perfectEstimate:`100% = perfecte schatting`,noTimeAccuracyData:`Nog geen gegevens over tijdnauwkeurigheid`,noFilamentData:`Geen filamentgegevens beschikbaar`,noPrinterData:`Geen printergegevens beschikbaar`,noPrintData:`Geen afdrukgegevens beschikbaar`,noPrintDataLast30Days:`Geen afdrukgegevens in de laatste 30 dagen`,failureReasons:`Oorzaken van fouten`,topFailureReasons:`Meest voorkomende foutoorzaken`,failedPrintsCount:`{{failed}} / {{total}} afdrukken mislukt`,lastWeekRate:`Vorige week: {{rate}}%`,resetLayout:`Indeling resetten`,recalculateCosts:`Kosten opnieuw berekenen`,recalculateCostsHint:`Alle archiefkosten opnieuw berekenen met de huidige filamentprijzen`,exportStats:`Statistieken exporteren`,exportAsCsv:`Exporteren als CSV`,exportAsExcel:`Exporteren als Excel`,hiddenCount:`{{count}} verborgen`,exportDownloaded:`Export gedownload`,exportFailed:`Export mislukt`,layoutReset:`Indeling gereset`,recalculatedCosts:`Kosten voor {{count}} archieven opnieuw berekend`,recalculateFailed:`Kosten opnieuw berekenen mislukt`,loadingStats:`Statistieken laden...`,noPermissionResetLayout:`Je hebt geen toestemming om de indeling te resetten`,noPermissionRecalculate:`Je hebt geen toestemming om kosten opnieuw te berekenen`,noPrintDataInRange:`Geen afdrukgegevens in het geselecteerde bereik`,periodFilament:`Filament in periode`,periodCost:`Kosten in periode`,avgPerPrint:`Gem. per afdruk`,usageOverTime:`Verbruik in de tijd`,energyOverTime:`Energie in de tijd`,filamentByWeight:`Gewicht`,printDuration:`Afdrukduur`,printerUtilization:`Printerbenutting`,filamentSuccess:`Succes per materiaal`,printHabits:`Afdrukgewoonten`,printTimeOfDay:`Afdruktijdstip`,colorDistribution:`Kleurverdeling`,noColorData:`Geen kleurgegevens beschikbaar`,records:`Records`,longestPrint:`Langste afdruk`,heaviestPrint:`Zwaarste afdruk`,mostExpensivePrint:`Duurste`,busiestDay:`Drukste dag`,successStreak:`Succesreeks`,streakPrint:`opeenvolgende afdruk`,streakPrints:`{{count}} opeenvolgende afdrukken`,printerStats:`Printerstatistieken`,hours:`uren`,avgPrints:`Gem. afdrukken`,noArchiveData:`Geen afdrukgegevens beschikbaar`,filamentByTime:`Tijd`,avgWeight:`Gem. gewicht`,avgTime:`Gem. tijd`,filamentByPrints:`Afdrukken`,timeframe:{today:`Vandaag`,"this-week":`Deze week`,"this-month":`Deze maand`,"last-7":`Laatste 7 dagen`,"last-30":`Laatste 30 dagen`,"last-90":`Laatste 90 dagen`,"this-year":`Dit jaar`,"all-time":`Altijd`,custom:`Aangepast bereik`,from:`Van`,to:`Tot`},allUsers:`Alle gebruikers`,noUser:`Geen gebruiker (systeem)`,filterByUser:`Filteren op gebruiker`},maintenance:{title:`Onderhoud`,overview:`Overzicht`,allOk:`Al het onderhoud is bijgewerkt`,dueCount:`{{count}} item te doen`,dueCount_plural:`{{count}} items te doen`,warningCount:`{{count}} waarschuwing`,warningCount_plural:`{{count}} waarschuwingen`,totalPrintTime:`Totale afdruktijd`,nextMaintenance:`Volgend onderhoud`,nothingDue:`Niets te doen`,tasks:`Taken`,lastPerformed:`Laatst uitgevoerd`,interval:`Interval`,hoursRemaining:`{{hours}}u resterend`,hoursOverdue:`{{hours}}u te laat`,markDone:`Als voltooid markeren`,performMaintenance:`Onderhoud uitvoeren`,history:`Geschiedenis`,noHistory:`Geen onderhoudsgeschiedenis`,editPrintHours:`Afdrukuren bewerken`,currentHours:`Huidige uren`,statusTab:`Status`,settingsTab:`Instellingen`,overdueCount:`{{count}} te laat`,dueSoonCount:`{{count}} binnenkort te doen`,dueSoon:`Binnenkort te doen`,allGood:`Alles goed`,overdueBy:`{{duration}} te laat`,dueIn:`Over {{duration}} te doen`,timeLeft:`{{duration}} resterend`,day:`1 dag`,days:`{{count}} dagen`,week:`1 week`,weeks:`{{count}} weken`,month:`1 maand`,months:`{{count}} maanden`,year:`1 jaar`,maintenanceTypes:`Onderhoudstypen`,maintenanceTypesDescription:`Systeemtaken en je aangepaste onderhoudstaken`,addCustomType:`Aangepast type toevoegen`,restoreDefaults:`Standaardtaken herstellen`,intervalType:`Intervaltype`,intervalValue:`Interval ({{type}})`,icon:`Pictogram`,documentationLink:`Documentatielink (optioneel)`,assignToPrinters:`Aan printers toewijzen`,selectAtLeastOnePrinter:`Selecteer minstens één printer`,addType:`Type toevoegen`,custom:`Aangepast`,printHours:`Afdrukuren`,calendarDays:`Kalenderdagen`,exampleName:`bijv. HEPA-filter vervangen`,viewDocumentation:`Documentatie bekijken`,timeBasedInterval:`Tijdsgebaseerd interval`,intervalOverrides:`Intervaloverschrijvingen`,intervalOverridesDescription:`Intervallen aanpassen voor specifieke printers`,assignedToPrinters:`Toegewezen aan printers:`,noPrintersAssigned:`Geen printers toegewezen`,addPrinterShort:`Toevoegen:`,printersAssignedClick:`{{count}} printer(s) toegewezen - klik om te beheren`,removeFromPrinter:`Van deze printer verwijderen`,types:{lubricateCarbonRods:`Koolstofstaven smeren`,lubricateRails:`Lineaire rails smeren`,cleanNozzle:`Nozzle/hotend reinigen`,checkBelts:`Riemspanning controleren`,cleanBuildPlate:`Bouwplaat reinigen`,checkExtruder:`Extrudertandwielen controleren`,checkCooling:`Koelventilatoren controleren`,generalInspection:`Algemene inspectie`,cleanCarbonRods:`Koolstofstaven reinigen`,lubricateSteelRods:`Stalen staven smeren`,cleanSteelRods:`Stalen staven reinigen`,cleanLinearRails:`Lineaire rails reinigen`,checkPtfeTube:`PTFE-buis controleren`,replaceHepaFilter:`HEPA-filter vervangen`,replaceCarbonFilter:`Koolstoffilter vervangen`,lubricateLeftNozzleRail:`Linker nozzle-rail smeren`},maintenanceComplete:`Onderhoud als voltooid gemarkeerd`,typeUpdated:`Onderhoudstype bijgewerkt`,typeDeleted:`Onderhoudstype verwijderd`,defaultsRestored:`{{count}} standaardtaak/taken hersteld`,printHoursUpdated:`Afdrukuren bijgewerkt`,printerAssigned:`Printer toegewezen`,printerRemoved:`Printer verwijderd`,deleteTypeConfirm:`"{{name}}" verwijderen?`,deleteSystemTypeTitle:`Standaard onderhoudstaak verwijderen?`,deleteSystemTypeMessage:`Weet je zeker dat je de standaard onderhoudstaak "{{name}}" wilt verwijderen?`,noPermissionUpdate:`Je hebt geen toestemming om onderhoudsitems bij te werken`,noPermissionPerform:`Je hebt geen toestemming om onderhoud uit te voeren`,noPermissionEditTypes:`Je hebt geen toestemming om onderhoudstypen te bewerken`,noPermissionDeleteTypes:`Je hebt geen toestemming om onderhoudstypen te verwijderen`,noPermissionEditHours:`Je hebt geen toestemming om afdrukuren te bewerken`,noPermissionRemovePrinter:`Je hebt geen toestemming om printertoewijzingen te verwijderen`,noPermissionAssignPrinter:`Je hebt geen toestemming om printers toe te wijzen`,noPermissionEditIntervals:`Je hebt geen toestemming om intervallen te bewerken`,configureSettings:`Onderhoudstypen en intervallen configureren`},settings:{sliceEngine:`Slice-engine`,sliceEngineSidecar:`Server-sidecar`,sliceEngineSidecarHint:`Slicen gebeurt op de server, in de slicer-sidecarcontainer.`,sliceEngineBrowser:`In browser`,sliceEngineBrowserHint:`Slicen gebeurt op dit apparaat, zonder tussenkomst van de server.`,title:`Instellingen`,general:`Algemeen`,tabs:{general:`Algemeen`,smartPlugs:`Slimme stekkers`,sensors:`Sensoren`,notifications:`Meldingen`,queue:`Workflow`,queueDispatch:`Wachtrij en verzending`,queuePipelines:`Pipelines`,filament:`Filament`,network:`Netwerk`,apiKeys:`API-sleutels`,virtualPrinter:`Virtuele printer`,spoolbuddy:`SpoolBuddy`,failureDetection:`Foutdetectie`,users:`Authenticatie`,backup:`Back-up`,emailAuth:`E-mailauthenticatie`,ldap:`LDAP`,twoFa:`Tweefactorauthenticatie`,oidc:`SSO / OIDC`,security:`Beveiliging`},spoolbuddy:{infoTitle:`SpoolBuddy-apparaten`,infoBody:`SpoolBuddy-kiosken registreren zichzelf automatisch via heartbeat. Registreer een apparaat hier af als het niet meer wordt gebruikt of als een verouderde duplicaatregistratie is achtergebleven na een daemoncrash.`,duplicatesTitle:`{{count}} apparaten geregistreerd`,duplicatesBody:`Alleen het eerst geregistreerde apparaat wordt gebruikt door de kioskinterface. Als een van deze apparaten een verouderd duplicaat na een crash is, registreer het dan af — een online apparaat registreert zichzelf opnieuw bij de volgende heartbeat.`,empty:`Nog geen SpoolBuddy-apparaten geregistreerd.`,online:`Online`,offline:`Offline`,unregister:`Registratie opheffen`,unregisterSuccess:`Apparaat afgemeld`,unregisterError:`Apparaat afmelden mislukt`,confirmTitle:`SpoolBuddy-apparaat afmelden?`,confirmBody:`Hiermee wordt "{{hostname}}" ({{deviceId}}) uit de database verwijderd. Als het apparaat online is, registreert het zichzelf opnieuw bij de volgende heartbeat.`,ipAddress:`IP-adres`,firmware:`Firmware`,lastSeen:`Laatst gezien`,daemonUptime:`Daemon-uptime`,systemUptime:`Systeem-uptime`,never:`nooit`,nfc:`NFC`,scale:`Weegschaal`,cpuTemp:`CPU-temp.`,cpuLoad:`CPU-belasting`,memory:`Geheugen`,disk:`Schijf`,update:`Bijwerken`,updateConfirmTitle:`SpoolBuddy-daemon bijwerken?`,updateConfirmBody:`Een software-update starten op "{{hostname}}"? De daemon wordt opnieuw gestart zodra de update is toegepast.`,restartBrowser:`Browser herstarten`,restartBrowserConfirmTitle:`Kioskbrowser herstarten?`,restartBrowserConfirmBody:`De kioskbrowser op "{{hostname}}" herstarten? Het scherm wordt kort zwart.`,restartDaemon:`Daemon herstarten`,restartDaemonConfirmTitle:`SpoolBuddy-daemon herstarten?`,restartDaemonConfirmBody:`De SpoolBuddy-daemon op "{{hostname}}" herstarten? Het apparaat is enkele seconden offline.`,reboot:`Opnieuw opstarten`,rebootConfirmTitle:`Apparaat opnieuw opstarten?`,rebootConfirmBody:`"{{hostname}}" opnieuw opstarten? Het apparaat is ongeveer een minuut offline.`,shutdown:`Afsluiten`,shutdownConfirmTitle:`Apparaat afsluiten?`,shutdownConfirmBody:`"{{hostname}}" afsluiten? Je hebt fysieke toegang nodig om het weer in te schakelen.`,commandConfirm:`Bevestigen`,commandQueued:`Opdracht in wachtrij geplaatst`,commandError:`Opdracht verzenden mislukt`},ldap:{title:`LDAP-authenticatie`,enabledDesc:`LDAP-authenticatie is ingeschakeld`,disabledDesc:`LDAP-authenticatie is uitgeschakeld`,disabledHint:`Configureer en sla de LDAP-instellingen hieronder op en schakel daarna in.`,enabled:`LDAP-authenticatie ingeschakeld`,disabled:`LDAP-authenticatie uitgeschakeld`,feature1:`Gebruikers kunnen inloggen met LDAP-inloggegevens`,feature2:`Lokaal beheerdersaccount blijft beschikbaar als terugvaloptie`,feature3:`LDAP-groepen worden bij inloggen gekoppeld aan BamBuddy-groepen`,serverConfig:`LDAP-serverconfiguratie`,serverUrl:`Server-URL`,serverUrlHint:`Gebruik ldaps:// voor SSL of ldap:// met StartTLS`,security:`Beveiliging`,securityHint:`StartTLS zet een gewone verbinding om naar TLS. LDAPS gebruikt TLS vanaf het begin.`,bindDn:`Bind-DN (serviceaccount)`,bindPassword:`Bind-wachtwoord`,searchBase:`Zoekbasis-DN`,userFilter:`Gebruikerszoekfilter`,userFilterHint:`{username} wordt vervangen door de inloggebruikersnaam. Gebruik (uid={username}) voor OpenLDAP.`,advanced:`Geavanceerd`,autoProvision:`Gebruikers automatisch aanmaken`,autoProvisionHint:`Automatisch een BamBuddy-account maken bij de eerste LDAP-login`,defaultGroup:`Standaardgroep`,defaultGroupNone:`— Geen (geen terugval) —`,defaultGroupHint:`Terugvalgroep die wordt toegewezen wanneer een LDAP-gebruiker zich authenticeert maar niet voorkomt in een gekoppelde LDAP-groep. Laat leeg om niet-gekoppelde gebruikers zonder machtigingen te laten.`,groupMapping:`Groepskoppeling (JSON)`,groupMappingHint:`Koppel LDAP-groep-DN's aan BamBuddy-groepen. Beschikbare groepen: `,testConnection:`Verbinding testen`,settingsSaved:`LDAP-instellingen opgeslagen`,errors:{serverRequired:`LDAP-server-URL is verplicht`,searchBaseRequired:`Zoekbasis-DN is verplicht`,enableAuthFirst:`Schakel authenticatie eerst in`,configureLdapFirst:`Sla de LDAP-instellingen eerst op`}},email:{smtpSettings:`SMTP-configuratie`,smtpHost:`SMTP-server`,smtpPort:`SMTP-poort`,security:`Beveiliging`,authentication:`Authenticatie`,username:`Gebruikersnaam`,password:`Wachtwoord`,fromEmail:`Afzender-e-mail`,fromName:`Afzendernaam`,testConnection:`SMTP-verbinding testen`,testRecipient:`E-mailadres testontvanger`,sendTest:`Testmail verzenden`,sending:`Verzenden...`,save:`Instellingen opslaan`,saving:`Opslaan...`,advancedAuth:`Geavanceerde authenticatie`,advancedAuthEnabled:`Geavanceerde authenticatie is ingeschakeld`,advancedAuthEnabledDesc:`E-mailgebaseerde functies voor gebruikersbeheer zijn actief. Nieuwe gebruikers ontvangen automatisch gegenereerde wachtwoorden per e-mail en gebruikers kunnen hun wachtwoord resetten via de functie Wachtwoord vergeten.`,advancedAuthDisabled:`Geavanceerde authenticatie is uitgeschakeld`,advancedAuthDisabledDesc:`Schakel geavanceerde authenticatie in om e-mailgebaseerde functies voor gebruikersbeheer te activeren.`,enable:`Inschakelen`,disable:`Uitschakelen`,feature1:`Wachtwoorden worden automatisch gegenereerd en naar nieuwe gebruikers gemaild`,feature2:`Gebruikers kunnen inloggen met gebruikersnaam of e-mailadres`,feature3:`De functie Wachtwoord vergeten is beschikbaar`,feature4:`Beheerders kunnen gebruikerswachtwoorden via e-mail resetten`,errors:{requiredFields:`Vul alle verplichte velden in`,usernameRequired:`Gebruikersnaam is verplicht wanneer authenticatie is ingeschakeld`,enterTestEmail:`Voer een test-e-mailadres in`,smtpServerAndEmail:`Vul SMTP-server en Afzender-e-mail in voordat je test`,usernamePasswordRequired:`Gebruikersnaam en wachtwoord zijn verplicht wanneer authenticatie is ingeschakeld`,configureSmtpFirst:`Configureer en test eerst de SMTP-instellingen`,enableAuthFirst:`Schakel authenticatie eerst in om e-mailfuncties te gebruiken.`},success:{settingsSaved:`SMTP-instellingen succesvol opgeslagen`},securityOptions:{starttls:`STARTTLS (poort 587)`,ssl:`SSL/TLS (poort 465)`,none:`Geen (poort 25)`},authOptions:{enabled:`Ingeschakeld`,disabled:`Uitgeschakeld`}},appearance:`Uiterlijk`,notifications:`Meldingen`,smartPlugs:`Slimme stekkers`,spoolman:`Spoolman`,updates:`Updates`,language:`Taal`,languageDescription:`Selecteer je voorkeurstaal`,theme:`Thema`,themeLight:`Licht`,themeDark:`Donker`,themeSystem:`Systeem`,defaultView:`Standaardweergave`,defaultViewDescription:`Pagina die wordt getoond bij het openen van de app`,checkForUpdates:`Controleren op updates`,autoUpdate:`Automatisch bijwerken`,currentVersion:`Huidige versie`,latestVersion:`Nieuwste versie`,upToDate:`Je bent up-to-date`,updateAvailable:`Update beschikbaar`,notificationLanguage:`Taal voor meldingen`,notificationLanguageDescription:`Taal voor pushmeldingen`,bedCooledThreshold:`Drempel voor afgekoeld bed`,bedCooledThresholdDescription:`Temperatuur waaronder het bed na een afdruk als afgekoeld wordt beschouwd`,userNotificationsEnabled:`Gebruikersmeldingen`,userNotificationsEnabledDescription:`Schakel het gebruikersmeldingenmenu en e-mailmeldingen voor afdrukgebeurtenissen in. Vereist Geavanceerde authenticatie.`,userNotificationsDisabledHint:`Schakel Geavanceerde authenticatie in om gebruikersmeldingen te gebruiken.`,notificationProviders:`Meldingsproviders`,addProvider:`Provider toevoegen`,editProvider:`Provider bewerken`,providerType:`Providertype`,testNotification:`Testmelding`,testSuccess:`Testmelding succesvol verzonden`,testFailed:`Testmelding verzenden mislukt`,quietHours:`Stille uren`,quietHoursDescription:`Niet storen tijdens deze uren`,quietHoursStart:`Start`,quietHoursEnd:`Einde`,events:{title:`Meldingsgebeurtenissen`,printStart:`Afdruk gestart`,printComplete:`Afdruk voltooid`,printFailed:`Afdruk mislukt`,printStopped:`Afdruk gestopt`,printProgress:`Voortgangsmijlpalen`,printProgressDescription:`Melden bij 25%, 50%, 75%`,printerOffline:`Printer offline`,printerError:`Printerfout`,filamentLow:`Weinig filament`,maintenanceDue:`Onderhoud nodig`,maintenanceDueDescription:`Melden wanneer onderhoud nodig is`},smartPlug:{title:`Slimme stekkers`,add:`Slimme stekker toevoegen`,edit:`Slimme stekker bewerken`,name:`Naam`,ipAddress:`IP-adres`,linkedPrinter:`Gekoppelde printer`,autoOn:`Automatisch inschakelen`,autoOnDescription:`Inschakelen wanneer afdruk start`,autoOff:`Automatisch uitschakelen`,autoOffDescription:`Uitschakelen nadat afdruk is voltooid`,offDelay:`Uitschakelvertraging`,offDelayMinutes:`Minuten na afdruk`,offDelayTemp:`Wanneer nozzle onder temperatuur is`,currentState:`Huidige status`,turnOn:`Inschakelen`,turnOff:`Uitschakelen`},filamentTracking:`Filamenttracking`,filamentTrackingDesc:`Kies hoe je filamentspoelen wilt bijhouden. Je kunt de ingebouwde voorraad gebruiken of een externe Spoolman-server koppelen.`,autoAddUnknownRfid:`Onbekende RFID-spoelen automatisch toevoegen`,autoAddUnknownRfidDesc:`Maak automatisch een voorraaditem wanneer een spoel met een onbekende RFID-tag wordt gedetecteerd. Schakel dit uit als je nieuwe spoelen handmatig vooraf registreert om duplicaten te voorkomen.`,filamentChecks:`Filamentcontroles`,disableFilamentWarnings:`Filamentwaarschuwingen uitschakelen`,disableFilamentWarningsDesc:`Geen waarschuwingen tonen over onvoldoende filament bij afdrukken of in wachtrij plaatsen`,preferLowestFilament:`Voorkeur voor laagste resterende hoeveelheid filament`,preferLowestFilamentDesc:`Als meerdere spoelen overeenkomen, gebruik dan de spoel met de minste resterende hoeveelheid filament`,preferLowestFilamentBackupNote:`Dit werkt alleen wanneer AMS Filament Backup op de printer is ingeschakeld — anders kan de printer niet overschakelen naar een tweede spoel wanneer de gekozen spoel leeg raakt.`,trackingModeBuiltIn:`Ingebouwde voorraad`,trackingModeBuiltInDesc:`Automatische RFID-koppeling en verbruikstracking inbegrepen`,trackingModeSpoolmanDesc:`Externe filamentbeheerserver`,builtInFeatureRfid:`Detecteert automatisch Bambu Lab RFID-spoelen in AMS`,builtInFeatureUsage:`Houdt filamentverbruik per afdruk bij`,builtInFeatureCatalog:`Spoelen, kleuren en K-factorprofielen beheren`,builtInFeatureThirdParty:`Spoelen van derden kunnen aan voorraadspoelen worden toegewezen`,amsSyncButton:`Gewichten synchroniseren vanuit AMS`,amsSyncTitle:`Spoelgewichten synchroniseren vanuit AMS`,amsSyncMessage:`Hiermee worden alle gewichten van voorraadspoelen overschreven met de huidige AMS remain%-waarden van verbonden printers. Gebruik dit om beschadigde gewichtsgegevens te herstellen. Printers moeten online zijn.`,amsSyncing:`Synchroniseren...`,amsSyncSuccess:`{{synced}} spoel(en) gesynchroniseerd, {{skipped}} overgeslagen`,amsSyncError:`Gewichten synchroniseren vanuit AMS mislukt`,spoolmanAmsSyncButton:`Spoolman-gewichten synchroniseren vanuit AMS`,spoolmanAmsSyncTitle:`Spoolman-spoelgewichten synchroniseren vanuit AMS`,spoolmanAmsSyncMessage:`Hiermee worden alle Spoolman-spoelgewichten bijgewerkt op basis van de huidige AMS remain%-waarden van verbonden printers. Printers moeten online zijn.`,spoolmanAmsSyncing:`Synchroniseren...`,spoolmanAmsSyncSuccess:`{{synced}} spoel(en) gesynchroniseerd, {{skipped}} overgeslagen`,spoolmanAmsSyncError:`Spoolman-gewichten synchroniseren vanuit AMS mislukt`,spoolmanAmsSyncErrorUnreachable:`Spoolman-gewichten synchroniseren mislukt (Spoolman niet bereikbaar)`,spoolmanAmsSyncErrorNotConfigured:`Spoolman-gewichten synchroniseren mislukt (Spoolman niet geconfigureerd)`,spoolmanNotConfigured:`Spoolman niet geconfigureerd`,spoolmanFilamentCatalogTitle:`Spoolman-filamentcatalogus`,spoolmanFilamentCatalogDesc:`Filamentnamen en taragewichten uit je Spoolman-instantie. Naam en spoelgewicht zijn hier bewerkbaar; alle andere eigenschappen worden rechtstreeks in Spoolman beheerd.`,spoolmanUrl:`Spoolman-URL`,spoolmanUrlHint:`URL van je Spoolman-server (bijv. http://localhost:7912)`,spoolmanConnected:`Verbonden`,spoolmanDisconnected:`Niet verbonden`,status:`Status`,connect:`Verbinden`,disconnect:`Verbinding verbreken`,howSyncWorks:`Hoe synchronisatie werkt`,syncInfoRfidOnly:`Alleen officiële Bambu Lab-spoelen met RFID worden gesynchroniseerd`,syncInfoAutoCreate:`Nieuwe spoelen worden bij de eerste synchronisatie automatisch in Spoolman aangemaakt`,syncInfoThirdPartySkipped:`Niet-Bambu Lab-spoelen (derden, hervuld) worden overgeslagen`,linkingExistingSpools:`Bestaande spoelen koppelen`,linkingExistingSpoolsDesc:`Om bestaande Spoolman-spoelen aan je AMS te koppelen, beweeg je over een AMS-sleuf en klik je op "Koppelen aan Spoolman".`,syncMode:`Synchronisatiemodus`,syncModeAuto:`Automatisch`,syncModeManual:`Alleen handmatig`,syncModeAutoDesc:`AMS-gegevens worden automatisch gesynchroniseerd wanneer wijzigingen worden gedetecteerd`,syncModeManualDesc:`Alleen synchroniseren wanneer handmatig gestart`,syncAmsData:`AMS-gegevens synchroniseren`,syncAmsDataDesc:`Printer-AMS-gegevens handmatig synchroniseren met Spoolman`,allPrinters:`Alle printers`,noDefaultPrinter:`Geen standaard (elke keer vragen)`,sidebarOrder:`Volgorde zijbalk`,saveThumbnails:`Miniaturen opslaan`,captureFinishPhoto:`Eindfoto vastleggen`,noPrintersConfigured:`Geen printers geconfigureerd`,archiveMode:{always:`Altijd archiefitem maken`,never:`Nooit archiefitem maken`,ask:`Elke keer vragen`},checkForUpdatesLabel:`Controleren op updates`,checkPrinterFirmware:`Printerfirmware controleren`,includeBetaUpdates:`Bètaversies opnemen`,includeBetaUpdatesDesc:`Melden over bèta- en prereleaseversies bij controle op updates`,localLogin:{disable:`Lokale login met gebruikersnaam/wachtwoord uitschakelen`,disableHint:`Wanneer ingeschakeld kunnen alleen SSO-providers inloggen. LDAP blijft onaangetast. Stel BAMBUDDY_LOCAL_LOGIN=true in op de server om een herstelmogelijkheid te behouden.`},enableRetry:`Opnieuw proberen inschakelen`,homeAssistantDescription:`Slimme stekkers bedienen via Home Assistant`,environmentManagedLabel:`(Omgevingsvariabele beheerd)`,autoEnabledViaEnv:`Automatisch ingeschakeld via omgevingsvariabelen`,urlFromEnvReadOnly:`Waarde ingesteld door omgevingsvariabele HA_URL (alleen-lezen)`,tokenFromEnvReadOnly:`Waarde ingesteld door omgevingsvariabele HA_TOKEN (alleen-lezen)`,mqttConnectedTo:`Verbonden met`,prometheusDescription:`Printergegevens beschikbaar stellen in Prometheus-formaat`,noSmartPlugsTitle:`Geen slimme stekkers geconfigureerd`,noSmartPlugsDescription:`Voeg een slimme stekker op basis van Tasmota toe om energieverbruik te volgen en stroomregeling te automatiseren.`,noProvidersTitle:`Geen providers geconfigureerd`,noProvidersDescription:`Voeg een provider toe om waarschuwingen te ontvangen.`,noTemplatesAvailable:`Geen sjablonen beschikbaar. Start de backend opnieuw om standaardsjablonen aan te maken.`,apiPermissionView:`Printerstatus en wachtrij bekijken`,apiPermissionEdit:`Items toevoegen aan en verwijderen uit de afdrukwachtrij`,apiKeysEmptyTitle:`Geen API-sleutels`,apiKeysEmptyDescription:`Maak een API-sleutel om te integreren met externe services.`,noUsersFound:`Geen gebruikers gevonden`,noGroupsFound:`Geen groepen gevonden`,noGroupsAvailable:`Geen groepen beschikbaar`,passwordsDoNotMatch:`Wachtwoorden komen niet overeen`,systemGroupWarning:`Namen van systeemgroepen kunnen niet worden gewijzigd`,authDisabledTitle:`Authenticatie is uitgeschakeld`,authDisabledFeature1:`Login vereisen voor toegang tot het systeem`,authDisabledFeature2:`Meerdere gebruikers maken met groepsgebaseerde machtigingen`,authDisabledFeature3:`Toegang regelen met meer dan 50 gedetailleerde machtigingen`,userHasCreated:`Deze gebruiker heeft gemaakt:`,userItemsQuestion:`Wat wil je met deze items doen?`,deleteUserConfirm:`Weet je zeker dat je deze gebruiker wilt verwijderen?`,actionCannotBeUndone:`Deze actie kan niet ongedaan worden gemaakt.`,addFirstSmartPlug:`Je eerste slimme stekker toevoegen`,providers:`Providers`,log:`Logboek`,testAll:`Alles testen`,testResults:`Testresultaten`,testPassedCount:`{{count}} geslaagd`,testFailedCount:`{{count}} mislukt`,messageTemplates:`Berichtsjablonen`,messageTemplatesDescription:`Meldingsberichten voor elke gebeurtenis aanpassen.`,apiKeys:`API-sleutels`,apiKeysDescription:`API-sleutels maken voor externe integraties en webhooks.`,createKey:`Sleutel maken`,apiKeyCreated:`API-sleutel succesvol gemaakt`,apiKeyCopyWarning:`Kopieer deze sleutel nu - hij wordt niet opnieuw getoond!`,useInApiBrowser:`Gebruiken in API-browser`,apiKeyQrButton:`QR-code`,apiKeyQrTitle:`Scannen om te configureren`,apiKeyQrCaption:`Scan met je mobiele app om deze server en API-sleutel toe te voegen.`,apiKeyQrWarning:`Bevat je geheime API-sleutel — deel deze niet en maak geen screenshot waar anderen hem kunnen zien.`,createNewApiKey:`Nieuwe API-sleutel maken`,keyName:`Sleutelnaam`,keyNamePlaceholder:`bijv. Home Assistant, OctoPrint`,readStatus:`Status lezen`,readStatusDescription:`Printerstatus, wachtrij, bibliotheek, archieven en slicerpipelines bekijken`,manageQueue:`Wachtrij beheren`,manageQueueDescription:`Items toevoegen aan en verwijderen uit de afdrukwachtrij. Met Bibliotheek beheren kun je slicerpipelines uitvoeren`,controlPrinter:`Printer bedienen`,controlPrinterDescription:`Afdrukken pauzeren, hervatten en stoppen`,manageLibrary:`Bibliotheek beheren`,manageLibraryDescription:`Bibliotheekbestanden uploaden, hernoemen, verwijderen en slicen; modellen importeren uit MakerWorld. Met Wachtrij beheren kun je slicerpipelines uitvoeren`,manageInventory:`Voorraad beheren`,manageInventoryDescription:`Spoelen en voorraadrecords maken, bijwerken en verwijderen. Vereist voor SpoolBuddy-kiosken (NFC-scan, weegschaalmetingen, kiosksysteemopdrachten).`,manageMaintenance:`Onderhoud beheren`,manageMaintenanceDescription:`Voltooid onderhoud registreren, tellers resetten, intervallen bewerken en de catalogus met onderhoudstypen beheren. Geschikt voor Home Assistant-automatiseringen die bijvoorbeeld registreren "Ik heb de nozzle gereinigd" zonder bredere printerbediening toe te staan.`,manageArchives:`Archieven beheren`,manageArchivesDescription:`Afdrukarchieven bewerken en verwijderen, inclusief oude afdrukken en hun bijdrage aan statistieken. Geschikt voor automatiseringen die de afdrukgeschiedenis opschonen.`,manageProjects:`Projecten beheren`,manageProjectsDescription:`Projecten maken, bijwerken en verwijderen en archieven eraan toevoegen. Geschikt voor automatiseringen die afdrukken in projecten organiseren.`,libraryBadge:`Bibliotheek`,inventoryBadge:`Voorraad`,maintenanceBadge:`Onderhoud`,archivesBadge:`Archieven`,projectsBadge:`Projecten`,cloudAccess:`Cloudtoegang toestaan`,cloudAccessDescription:`Bambu Cloud-presets en filamenten namens jou lezen. Vereist dat je bent ingelogd bij Bambu Cloud.`,cloudBadge:`Cloud`,updateEnergyCost:`Elektriciteitsprijs bijwerken`,updateEnergyCostDescription:`Sta toe dat deze sleutel via POST een nieuwe elektriciteitsprijs per kWh naar /settings/electricity-price stuurt. Handig voor Home Assistant-automatiseringen met dynamische tarieven (Tibber, Octopus, enz.). Dit is het enige instellingenveld dat via een API-sleutel schrijfbaar is.`,energyCostBadge:`Energie`,legacyKey:`Verouderd`,legacyKeyTooltip:`Aangemaakt vóór eigendom per gebruiker; maak opnieuw om cloudtoegang te gebruiken`,unnamedKey:`Naamloze sleutel`,lastUsed:`Laatst gebruikt`,read:`Lezen`,control:`Bedienen`,createFirstKey:`Je eerste sleutel maken`,webhookEndpoints:`Webhook-eindpunten`,webhookApiKeyHint:`Gebruik je API-sleutel in de X-API-Key-header.`,webhook:{getAllStatus:`Status van alle printers ophalen`,getSpecificStatus:`Status van specifieke printer ophalen`,addToQueue:`Toevoegen aan afdrukwachtrij`,pausePrint:`Afdruk pauzeren`,resumePrint:`Afdruk hervatten`,stopPrint:`Afdruk stoppen`},apiBrowser:`API-browser`,apiBrowserDescription:`Alle beschikbare API-eindpunten verkennen en testen.`,apiKeyForTesting:`API-sleutel voor testen`,apiKeyPlaceholder:`Plak hier je API-sleutel om geauthenticeerde eindpunten te testen...`,apiKeyHint:`Deze sleutel wordt als X-API-Key-header met verzoeken meegestuurd.`,deleteApiKeyTitle:`API-sleutel verwijderen`,deleteApiKeyMessage:`Weet je zeker dat je deze API-sleutel wilt verwijderen? Integraties die deze sleutel gebruiken stoppen dan met werken.`,deleteKey:`Sleutel verwijderen`,amsDisplayThresholds:`AMS-weergavedrempels`,amsThresholdsDescription:`Kleurdrempels voor AMS-indicatoren voor luchtvochtigheid en temperatuur configureren.`,humidity:`Luchtvochtigheid`,goodGreen:`Goed (groen)`,fairOrange:`Redelijk (oranje)`,aboveFairBad:`Boven de redelijke drempel wordt rood (slecht) weergegeven`,fairAlsoDryingThreshold:`Deze drempel wordt ook gebruikt om automatisch drogen te starten wanneer dit is ingeschakeld`,fairBelowDryingFloor:`Automatisch drogen kan deze waarde niet bereiken: een AMS leest {{floor}}% of hoger terwijl de verwarming draait, waardoor elke cyclus direct zou eindigen en opnieuw starten. Verhoog dit tot boven {{floor}}% als automatisch drogen is ingeschakeld.`,temperature:`Temperatuur`,goodBlue:`Goed (blauw)`,aboveFairHot:`Boven de redelijke drempel wordt rood (heet) weergegeven`,tempAlarmThreshold:`Alarm boven`,tempAlarmSeparateFromBand:`Alleen de alarmdrempel verstuurt meldingen — Goed en Redelijk kleuren de weergave. Laat het leeg om te alarmeren bij de drempel Redelijk, zoals voorheen.`,tempAlarmMustBePositive:`Een drempel van 0 of lager wordt genegeerd — het alarm valt terug op de drempel Redelijk.`,historyRetention:`Bewaartermijn geschiedenis`,keepSensorHistory:`Sensorgeschiedenis bewaren gedurende`,historyRetentionDescription:`Oudere gegevens over luchtvochtigheid en temperatuur worden automatisch verwijderd`,defaultPrintOptions:`Standaard afdrukopties`,defaultPrintOptionsDescription:`Stel standaardwaarden in voor afdrukopties bij het starten van nieuwe afdrukken. Deze kunnen per afdruk in het afdrukdialoogvenster worden overschreven.`,defaultBedLevelling:`Bednivellering`,defaultBedLevellingDesc:`Bed automatisch nivelleren voor afdruk`,defaultFlowCali:`Flowkalibratie`,defaultFlowCaliDesc:`Extrusieflow kalibreren`,defaultVibrationCali:`Trillingskalibratie`,defaultVibrationCaliDesc:`Ringing-artefacten verminderen`,defaultLayerInspect:`Inspectie eerste laag`,defaultLayerInspectDesc:`AI-inspectie van de eerste laag`,defaultTimelapse:`Timelapse`,defaultTimelapseDesc:`Timelapsevideo opnemen`,defaultNozzleOffsetCali:`Nozzle-offsetkalibratie`,defaultNozzleOffsetCaliDesc:`Nozzle-offsets tussen extruders kalibreren`,tempFanPresetsTitle:`Voorinstellingen temperatuur en ventilator`,tempFanPresetsDescription:`Pas de snelkeuzewaarden aan die worden weergegeven in pop-overs voor temperatuur en ventilatorsnelheid op printerkaarten. De knop Uit wordt altijd weergegeven.`,tempFanPresetsNozzle:`Nozzletemperatuur`,tempFanPresetsBed:`Bedtemperatuur`,tempFanPresetsChamber:`Kamertemperatuur`,tempFanPresetsFan:`Ventilatorsnelheid`,tempFanPresetsReset:`Standaardwaarden herstellen`,concurrentUploadsTitle:`Gelijktijdige uploads`,concurrentUploadsDescription:`Hoeveel printers de wachtrij tegelijk bestanden mag sturen. Printers ontvangen bestanden langzaam (een grote afdruk kan enkele minuten duren) en elke printer wacht op zijn beurt — bij een groter printerpark voorkomt een hogere waarde dat de laatste printer in een batch op alle eerdere overdrachten moet wachten. Verlaag dit als je netwerk of Bambuddy-host moeite heeft met parallelle overdrachten.`,concurrentUploadsLabel:`Printers tegelijk uploaden`,concurrentUploadsHelp:`1 verstuurt naar één printer tegelijk (het oude gedrag). Standaard is 4.`,staggeredStart:`Gespreide start`,staggeredStartDescription:`Standaard groepsgrootte en interval bij gespreid starten van batches over meerdere printers. Kan per batch in het afdrukvenster worden overschreven.`,preheatTitle:`Voorverwarmen en warmtestabilisatie`,preheatDescription:`Verwarm het bed (en de kamer, indien ondersteund) en houd de temperatuur vast voordat elke afdruk uit de wachtrij start. Handig voor technische filamenten (PA, ABS) op printers zonder actieve kamerverwarming — het bed verwarmt de kamer via straling terwijl de stabilisatietimer loopt. Het beddoel wordt uit het afdrukbestand gelezen; kamerwerking hangt af van het printermodel.`,preheatEnabled:`Voorverwarmen en stabiliseren inschakelen`,preheatEnabledDesc:`Wanneer uitgeschakeld worden afdrukken uit de wachtrij direct verzonden. Elk wachtrij-item kan dit per afdruk overschrijven.`,preheatFilamentTargetsLabel:`Kamerdoel per filament (°C)`,preheatFilamentTargetsHint:`Bambuddy kiest het hoogste doel van de geladen AMS-sleuven. Een afdruk waarvan alle sleuven 0 opleveren — PLA, PETG, TPU, PVA — slaat het voorverwarmen volledig over en start meteen.`,preheatFilamentTargetsReset:`Standaardwaarden herstellen`,preheatFilamentTargetsDefaultRow:`Overig / niet gekoppeld`,preheatMaxWait:`Max. wachttijd (seconden)`,preheatMaxWaitHelp:`Maximale duur van de opwarmfase van de kamer voordat wordt doorgegaan.`,preheatSoak:`Stabiliseren (seconden)`,preheatSoakHelp:`Wachttijd nadat het doel is bereikt of de maximale wachttijd is verstreken.`,preheatHardwareTitle:`Gedrag per printer:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E verwarmen de kamer actief via M141. X1C/P2S lezen de kamertemperatuur maar vertrouwen op stralingswarmte van het bed. P1S/P1P/A1/A1 Mini hebben geen kamersensor — alleen de stabilisatietimer is van toepassing.`,preheatPerItemDesc:`Verwarm bed en kamer voordat deze afdruk start. Standaard wordt de globale schakelaar Instellingen → Workflow gebruikt.`,preheatOverride_inherit:`Overnemen`,preheatOverride_on:`Aan`,preheatOverride_off:`Uit`,calibrationMode_off:`Uit`,calibrationMode_on:`Aan`,calibrationMode_auto:`Auto`,preheatTargetOverride:`Kamerdoel overschrijven (°C, leeg = filamentstandaard)`,preheatTargetOverrideHelp:`0 verwarmt het bed en voert het doorwarmen uit zonder kamer. Laat het leeg en een afdruk zonder kamerbehoefte slaat het voorverwarmen volledig over.`,plateClear:`Bevestiging plaat vrij`,requirePlateClear:`Bevestiging vereisen dat plaat vrij is`,requirePlateClearDescription:`Wanneer ingeschakeld wacht de scheduler op een bevestiging per printer dat de plaat vrij is voordat afdrukken uit de wachtrij starten op printers met voltooide taken. Als je dit uitschakelt, worden ook de plaatstatusbadge en de knop "Plaat als leeg markeren" op printerkaarten verborgen.`,keepBedWarm:`Bed warm houden tussen afdrukken`,keepBedWarmDesc:`Tijdens het wachten op het vrijgeven van de plaat wordt het bed op de onderstaande warmhoudtemperatuur gehouden zodat de kamer warm blijft — of op de eigen bedtemperatuur van de volgende afdruk als die hoger is. Alleen van toepassing wanneer de volgende afdruk kamerverwarming nodig heeft (ASA, ABS, PA, PC enz.). Vereist dat bevestiging plaat vrij is ingeschakeld.`,keepWarmBedTemp:`Warmhoudtemperatuur bed (°C)`,keepWarmBedTempHelp:`Wordt gebruikt wanneer het bed de kamer moet verwarmen — tijdens warmhouden en bij voorverwarmen wanneer het afdrukbestand geen bedtemperatuur bevat. Een hogere bedtemperatuur uit het afdrukbestand heeft altijd voorrang.`,keepWarmMaxMinutes:`Warmhouden stoppen na (minuten)`,keepWarmMaxMinutesHelp:`Als de plaat binnen deze tijd niet is vrijgegeven, worden de verwarmingselementen uitgeschakeld in plaats van onbeperkt warm gehouden.`,gcodeInjection:`G-code-injectie`,gcodeInjectionDescription:`Configureer aangepaste G-code die aan het begin en/of einde van afdrukken wordt ingevoegd voor automatische afdruksystemen zoals Farmloop, SwapMod, AutoClear en Printflow 3D. Fragmenten worden per printermodel ingesteld en toegepast wanneer "G-code injecteren" is ingeschakeld op een wachtrij-item.`,gcodeInjectionNoPrinters:`Geen printers gevonden. Voeg printers toe om G-codefragmenten te configureren.`,gcodeStartLabel:`Start-G-code`,gcodeEndLabel:`Eind-G-code`,gcodeStartPlaceholder:`G-code die vóór de start van de afdruk wordt toegevoegd...`,gcodeEndPlaceholder:`G-code die na afloop van de afdruk wordt toegevoegd...`,staggerGroupSize:`Groepsgrootte`,staggerGroupSizeHelp:`Aantal printers dat per groep gelijktijdig start`,staggerInterval:`Interval (minuten)`,staggerIntervalHelp:`Vertraging tussen het starten van elke groep`,queueDrying:`Automatisch drogen in wachtrij`,queueDryingDescription:`Droog AMS-filament automatisch wanneer de printer tussen afdrukken in de wachtrij inactief is. Gebruikt de bovenstaande luchtvochtigheidsdrempel om het drogen te starten.`,queueDryingEnabled:`Automatisch drogen inschakelen`,queueDryingEnabledDescription:`Start AMS-drogen automatisch wanneer de printer inactief is en de luchtvochtigheid boven de drempel ligt`,queueDryingBlock:`Wachten tot drogen is voltooid`,queueDryingBlockDescription:`Blokkeer de afdrukwachtrij tot het drogen is voltooid. Wanneer uitgeschakeld hebben afdrukken voorrang op drogen.`,ambientDryingEnabled:`Drogen zonder wachtrij`,ambientDryingEnabledDescription:`Droog filament automatisch op inactieve printers wanneer de luchtvochtigheid boven de drempel komt, ook zonder afdrukken in de wachtrij.`,printDryingEnabled:`Doorgaan met drogen tijdens afdrukken`,printDryingEnabledDescription:`Sta toe dat automatisch drogen tijdens een afdruk blijft draaien op ondersteunde hardware (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L met recente firmware). De droogtemperatuur wordt automatisch begrensd op 5°C onder de inactieve preset om spoelen te beschermen.`,dryingPresets:`Droogpresets`,dryingPresetsDescription:`Temperatuur en duur per filamenttype. AMS 2 Pro gebruikt lagere temperaturen, AMS-HT ondersteunt hogere temperaturen.`,dryingFilament:`Filament`,humidityThresholds:`Luchtvochtigheidsdrempels`,humidityThresholdsDescription:`Luchtvochtigheidsdrempel per filament voor automatisch drogen en alarmen. Bij gemengde lading in één AMS wordt de laagste drempel gebruikt.`,humidityThresholdCol:`Drempel`,humidityThresholdDefault:`Standaard (onbekende typen)`,printModal:`Afdrukvenster`,expandCustomMapping:`Aangepaste toewijzing standaard uitklappen`,expandCustomMappingDescription:`Bij afdrukken naar meerdere printers de AMS-toewijzing per printer uitgeklapt tonen`,authentication:`Authenticatie`,authEnabledDescription:`Je instantie is beveiligd met gebruikersauthenticatie`,authDisabledDescription:`Schakel in om inloggen te vereisen en gebruikerstoegang te beheren`,authDisabledMessage:`Schakel authenticatie in om gebruikersaccounts te maken, machtigingen te beheren en je Bambuddy-instantie te beveiligen.`,enableAuthentication:`Authenticatie inschakelen`,currentUser:`Huidige gebruiker`,changePassword:`Wachtwoord wijzigen`,admin:`Beheerder`,users:`Gebruikers`,addUser:`Gebruiker toevoegen`,groups:`Groepen`,addGroup:`Groep toevoegen`,system:`Systeem`,noDescription:`Geen beschrijving`,userCount:`{{count}} gebruikers`,permissionCount:`{{count}} machtigingen`,createUser:`Gebruiker maken`,username:`Gebruikersnaam`,enterUsername:`Voer gebruikersnaam in`,password:`Wachtwoord`,enterPassword:`Voer wachtwoord in`,passwordRequirements:`Minstens 8 tekens, met één hoofdletter, één kleine letter, één cijfer en één speciaal teken.`,confirmPassword:`Wachtwoord bevestigen`,confirmPasswordPlaceholder:`Bevestig wachtwoord`,viewReleaseOnGitHub:`Release bekijken op GitHub`,turnAllPlugsOn:`Alle stekkers inschakelen`,turnAllPlugsOff:`Alle stekkers uitschakelen`,clearNotificationLogs:`Meldingslogboeken wissen`,clearLogsMessage:`Hiermee worden alle meldingslogboeken ouder dan 30 dagen permanent verwijderd. Deze actie kan niet ongedaan worden gemaakt.`,clearLogs:`Logboeken wissen`,resetUiPreferences:`UI-voorkeuren resetten`,resetUiPreferencesMessage:`Hiermee worden alle UI-voorkeuren teruggezet naar de standaardwaarden: volgorde zijbalk, thema, dashboardindeling, weergavemodi en sorteervoorkeuren. Je printers, archieven en serverinstellingen worden NIET beïnvloed. De pagina wordt na het wissen opnieuw geladen.`,resetPreferences:`Voorkeuren resetten`,deleteGroupTitle:`Groep verwijderen`,deleteGroupMessage:`Weet je zeker dat je deze groep wilt verwijderen? Gebruikers in deze groep verliezen deze machtigingen.`,deleteGroup:`Groep verwijderen`,disableAuthenticationTitle:`Authenticatie uitschakelen`,disableAuthenticationMessage:`Weet je zeker dat je authenticatie wilt uitschakelen? Hierdoor wordt je Bambuddy-instantie toegankelijk zonder login. Alle gebruikers blijven in de database, maar authenticatie wordt uitgeschakeld.`,disableAuthentication:`Authenticatie uitschakelen`,configureBambuddy:`Bambuddy configureren`,systemDefault:`Systeemstandaard`,archiveSettings:`Archiefinstellingen`,newWindow:`Nieuw venster`,embeddedOverlay:`Ingebedde overlay`,preferredSlicer:`Voorkeursslicer`,preferredSlicerDescription:`Slicer die wordt gebruikt voor slicen in de app via de API-sidecar`,openInSlicerLabel:`Openen in slicer`,openInSlicerInherit:`Zelfde als API-slicer`,openInSlicerDescription:`Desktop-slicer die wordt gebruikt door de knop 'Openen in slicer'. Laat op 'Zelfde als API-slicer' staan om deze over te nemen, of kies een andere slicer voor lokaal gebruik.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev heeft bekende CLI-bugs die het slicen van veel door Bambu gemaakte 3MF's blokkeren — zie upstream issues #12426 (segfault bij gekleurde multi-extruderbestanden) en #13386 (afwijzing door strikte validatie van parameterbereik). Bambu Studio wordt aanbevolen tot de upstream fixes beschikbaar zijn.`,useSlicerApi:`Slicer-API gebruiken`,useSlicerApiDescription:`Wanneer ingeschakeld openen acties "Slicen" het slicervenster in de app en roepen ze de slicer-API-sidecar aan. Wanneer uitgeschakeld (standaard) worden ze via een URI-schema aan de desktopslicer doorgegeven.`,slicerCard:`Slicer`,orcaslicerApiUrl:`OrcaSlicer-sidecar-URL`,bambuStudioApiUrl:`Bambu Studio-sidecar-URL`,slicerStallTimeout:`Time-out slicerstagnatie (minuten)`,slicerStallTimeoutDescription:`Stop een slice na deze tijd als er geen voortgang van de sidecar is. Zware modellen die voortgang blijven melden worden nooit afgebroken, hoe lang ze ook duren. Sidecars die geen voortgang melden gebruiken dit in plaats daarvan als totale tijdslimiet.`,slicerApiUrlDescription:`URL van de slicer-API-sidecarcontainer. Laat leeg om de standaardwaarden van de omgevingsvariabelen SLICER_API_URL / BAMBU_STUDIO_API_URL te gebruiken.`,externalCameras:`Externe camera's`,costTracking:`Kostentracking`,billingEnabled:`Facturering inschakelen`,billingEnabledDescription:`Gebruikers kosten voor afdrukken in rekening brengen en financiële functies inschakelen`,printerKillSwitch:`Noodstop ongeautoriseerde afdruk`,printerKillSwitchDescription:`Stop afdrukken direct wanneer ze zonder autorisatie starten.`,financeBudgetReset:`Maandelijkse reset financieel budget`,financeBudgetResetDay:`Resetdag`,financeBudgetResetDayHelp:`Voor korte maanden wordt op de laatste dag van de maand gereset.`,financeBudgetResetTimezone:`Tijdzone voor reset`,financeBudgetResetTimezoneHelp:`Start van budgetperiode wordt in deze tijdzone berekend.")`,rebuildLedger:`Portemonnee-grootboek opnieuw opbouwen`,rebuildLedgerStarted:`Opnieuw opbouwen van grootboek gestart`,rebuildLedgerConfirmTitle:`Portemonnee-grootboek opnieuw opbouwen?`,rebuildLedgerConfirmMessage:`Hiermee wordt het portemonnee-grootboek opnieuw opgebouwd om historische saldowaarden te herstellen. Voer dit alleen uit als je weet wat je doet.`,rebuildLedgerInProgress:`Opnieuw opbouwen starten...`,printsOnly:`Alleen afdrukken`,totalConsumption:`Totaal verbruik`,dataManagement:`Gegevensbeheer`,storageUsage:`Opslaggebruik`,storageUsageDescription:`Verdeling van gegevensgebruik per categorie`,storageUsageTotal:`Totaal`,storageUsageErrors:`Fouten`,storageUsageOtherBreakdown:`Overig (inclusief statische assets, scripts en configuratiebestanden)`,storageUsageSystem:`Systeem`,storageUsageData:`Gegevens`,storageUsageUnavailable:`Informatie over opslaggebruik niet beschikbaar`,clearNotificationLogsDescription:`Meldingslogboeken ouder dan 30 dagen verwijderen`,resetUiPreferencesDescription:`Reset volgorde zijbalk, thema, weergavemodi en indelingsvoorkeuren. Printers, archieven en instellingen worden niet beïnvloed.`,enableHomeAssistant:`Home Assistant inschakelen`,enableMqtt:`MQTT inschakelen`,useTls:`TLS gebruiken`,enableMetricsEndpoint:`Metrics-eindpunt inschakelen`,availableMetrics:`Beschikbare metrics`,editUser:`Gebruiker bewerken`,deleteUserTitle:`Gebruiker verwijderen`,groupName:`Groepsnaam`,leaveEmptyForAnonymous:`Laat leeg voor anoniem`,leaveEmptyForNoAuth:`Laat leeg voor geen authenticatie`,enterNewPassword:`Voer nieuw wachtwoord in`,confirmNewPassword:`Bevestig nieuw wachtwoord`,enterGroupName:`Voer groepsnaam in`,enterDescriptionOptional:`Voer beschrijving in (optioneel)`,enterCurrentPassword:`Voer huidig wachtwoord in`,enterNewPasswordMin6:`Voer nieuw wachtwoord in (min. 6 tekens)`,toast:{keyCopied:`Sleutel naar klembord gekopieerd`,copyFailed:`Sleutel kopiëren mislukt`,keyAddedToBrowser:`Sleutel toegevoegd aan API-browser`,clearLogsFailed:`Logboeken wissen mislukt`,uiPreferencesReset:`UI-voorkeuren gereset. Vernieuwen...`,authDisabled:`Authenticatie succesvol uitgeschakeld`,authDisableFailed:`Authenticatie uitschakelen mislukt`,apiKeyCreated:`API-sleutel gemaakt`,apiKeyDeleted:`API-sleutel verwijderd`,userCreated:`Gebruiker succesvol gemaakt`,userUpdated:`Gebruiker succesvol bijgewerkt`,userDeleted:`Gebruiker succesvol verwijderd`,groupCreated:`Groep succesvol gemaakt`,groupUpdated:`Groep succesvol bijgewerkt`,groupDeleted:`Groep succesvol verwijderd`,fillRequiredFields:`Vul alle verplichte velden in`,passwordsDoNotMatch:`Wachtwoorden komen niet overeen`,passwordTooShort:`Wachtwoord moet minstens 8 tekens bevatten`,passwordNeedsUppercase:`Wachtwoord moet minstens één hoofdletter bevatten`,passwordNeedsLowercase:`Wachtwoord moet minstens één kleine letter bevatten`,passwordNeedsDigit:`Wachtwoord moet minstens één cijfer bevatten`,passwordNeedsSpecial:`Wachtwoord moet minstens één speciaal teken bevatten`,enterGroupName:`Voer een groepsnaam in`,settingsSaved:`Instellingen opgeslagen`,noPermissionUpdate:`Je hebt geen toestemming om instellingen te wijzigen`,cameraSettingsSaved:`Camera-instellingen opgeslagen`,enterCameraUrl:`Voer een camera-URL in`,passwordChanged:`Wachtwoord succesvol gewijzigd`,connectionFailed:`Verbinding mislukt`,testFailed:`Test mislukt`,cameraConnected:`Camera verbonden{{resolution}}`,cameraConnectedCoalesced:`Camera verbonden{{resolution}} (gedeeld met een opname die al draait)`},testConnection:`Verbinding testen`,catalog:{spoolCatalog:`Spoelcatalogus`,spoolCatalogDescription:`Lege spoelgewichten per merk/type. Gebruikt voor automatisch opzoeken van gewicht bij het toevoegen van spoelen.`,searchCatalog:`Catalogus zoeken...`,addNewEntry:`Nieuw item toevoegen`,namePlaceholder:`Naam (bijv. Bambu Lab - Plastic)`,weight:`Gewicht`,type:`Type`,default:`Standaard`,custom:`Aangepast`,noMatch:`Geen items komen overeen met je zoekopdracht`,empty:`Geen items in catalogus`,deleteEntry:`Item verwijderen`,deleteConfirm:`Weet je zeker dat je "{{name}}" wilt verwijderen?`,resetCatalog:`Catalogus resetten`,resetConfirm:`Catalogus terugzetten naar standaardwaarden? Hiermee worden alle aangepaste items verwijderd.`,loadFailed:`Spoelcatalogus laden mislukt`,nameWeightRequired:`Naam en gewicht zijn verplicht`,entryAdded:`Item toegevoegd`,addFailed:`Item toevoegen mislukt`,entryUpdated:`Item bijgewerkt`,updateFailed:`Item bijwerken mislukt`,entryDeleted:`Item verwijderd`,deleteFailed:`Item verwijderen mislukt`,resetSuccess:`Catalogus teruggezet naar standaardwaarden`,resetFailed:`Catalogus resetten mislukt`,exported:`{{count}} items geëxporteerd`,imported:`{{added}} items geïmporteerd ({{skipped}} overgeslagen)`,importFailed:`Importeren mislukt: ongeldig JSON-formaat`,exportTooltip:`Catalogus exporteren naar JSON`,importTooltip:`Catalogus importeren uit JSON`,resetTooltip:`Standaardwaarden herstellen`,selectedCount:`{{count}} geselecteerd`,deleteSelected:`Geselecteerde verwijderen`,bulkDeleteConfirm:`Weet je zeker dat je {{count}} items wilt verwijderen?`,bulkDeleted:`{{count}} items verwijderd`,bulkDeleteFailed:`Items verwijderen mislukt`,material:`Materiaal`,spoolWeight:`Spoelgewicht`,color:`Kleur`,updateSpoolWeight:`Spoelgewicht bijwerken`,filamentUpdated:`Filament bijgewerkt`,filamentUpdateFailed:`Filament bijwerken mislukt`,filamentUpdateInvalid:`Ongeldige filamentgegevens`,keepExistingSpoolWeight:`Oud gewicht behouden voor bestaande spoelen`,keepExistingSpoolWeightDesc:`Spoelen die al met dit filamenttype zijn gemaakt behouden het oude taragewicht. Nieuwe spoelen gebruiken de bijgewerkte waarde.`,applyToAllSpools:`Toepassen op alle spoelen`,applyToAllSpoolsDesc:`Alle gewichtsberekeningen voor dit filamenttype gebruiken direct het nieuwe taragewicht.`},colorCatalog:{title:`Kleurcatalogus`,description:`Filamentkleuren per fabrikant/materiaal. Gebruikt voor automatisch opzoeken van kleur bij het toevoegen van spoelen.`,searchColors:`Kleuren zoeken...`,allManufacturers:`Alle fabrikanten`,addNewColor:`Nieuwe kleur toevoegen`,manufacturer:`Fabrikant`,colorName:`Kleurnaam`,hex:`Hex`,materialOptional:`Materiaal (optioneel)`,showing:`{{filtered}} van {{total}} kleuren weergegeven`,noMatch:`Geen kleuren komen overeen met je zoekopdracht`,empty:`Geen kleuren in catalogus`,deleteColor:`Kleur verwijderen`,deleteConfirm:`Weet je zeker dat je "{{name}}" wilt verwijderen?`,resetCatalog:`Kleurcatalogus resetten`,resetConfirm:`Catalogus terugzetten naar standaardwaarden? Hiermee worden alle aangepaste kleuren verwijderd.`,sync:`Synchroniseren`,starting:`Starten...`,syncTooltip:`Synchroniseren vanaf FilamentColors.xyz (2000+ kleuren, kan een minuut duren)`,loadFailed:`Kleurcatalogus laden mislukt`,fieldsRequired:`Fabrikant, kleurnaam en hexkleur zijn verplicht`,colorAdded:`Kleur toegevoegd`,addFailed:`Kleur toevoegen mislukt`,colorUpdated:`Kleur bijgewerkt`,updateFailed:`Kleur bijwerken mislukt`,colorDeleted:`Kleur verwijderd`,deleteFailed:`Kleur verwijderen mislukt`,resetSuccess:`Kleurcatalogus teruggezet naar standaardwaarden`,resetFailed:`Catalogus resetten mislukt`,syncUpToDate:`Al up-to-date ({{count}} kleuren gecontroleerd)`,syncComplete:`{{added}} nieuwe kleuren toegevoegd ({{skipped}} bestonden al)`,syncError:`Synchronisatiefout`,syncFailed:`Synchroniseren vanaf FilamentColors.xyz mislukt`,exported:`{{count}} kleuren geëxporteerd`,imported:`{{added}} kleuren geïmporteerd ({{skipped}} overgeslagen)`,importFailed:`Importeren mislukt: ongeldig JSON-formaat`,selectedCount:`{{count}} geselecteerd`,deleteSelected:`Geselecteerde verwijderen`,bulkDeleteConfirm:`Weet je zeker dat je {{count}} kleuren wilt verwijderen?`,bulkDeleted:`{{count}} kleuren verwijderd`,bulkDeleteFailed:`Kleuren verwijderen mislukt`},dateFormat:`Datumnotatie`,dateFormatUs:`VS (MM/DD/JJJJ)`,dateFormatEu:`EU (DD/MM/JJJJ)`,dateFormatIso:`ISO (JJJJ-MM-DD)`,timeFormat:`Tijdnotatie`,timeFormat12:`12-uurs (3:30 PM)`,timeFormat24:`24-uurs (15:30)`,defaultPrinter:`Standaardprinter`,defaultPrinterDescription:`Selecteer deze printer vooraf voor uploads, opnieuw afdrukken en andere bewerkingen.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Gebruik Zijbalk om items opnieuw te ordenen, zichtbaarheid te resetten en aangepaste links te beheren.`,setDefault:`Als standaard instellen`,sidebarOrderSetDefaultHint:`Als standaard instellen past de huidige menuvolgorde toe op gebruikers die hun menu nog niet hebben aangepast.`,sidebarDefaultSet:`Standaard menuvolgorde is ingesteld.`,sidebarDefaultCleared:`Standaard menuvolgorde is gewist.`,sidebarDefaultFailed:`Standaard menuvolgorde instellen mislukt.`,reset:`Resetten`,darkMode:`Donkere modus`,lightMode:`Lichte modus`,active:`(actief)`,background:`Achtergrond`,accent:`Accent`,style:`Stijl`,bgNeutral:`Neutraal`,bgWarm:`Warm`,bgCool:`Koel`,bgOled:`OLED-zwart`,bgSlate:`Leisteenblauw`,bgForest:`Bosgroen`,accentGreen:`Groen`,accentTeal:`Blauwgroen`,accentBlue:`Blauw`,accentOrange:`Oranje`,accentPurple:`Paars`,accentRed:`Rood`,styleClassic:`Klassiek`,styleGlow:`Gloed`,styleVibrant:`Levendig`,themeToggleHint:`Schakel met het pictogram in de zijbalk tussen donkere, lichte en systeemmodus.`,progressInTitle:`Afdrukvoortgang in tabblad`,progressInTitleDescription:`Toon het percentage van de actieve afdruk en een voortgangsring in het browsertabblad.`,autoArchivePrints:`Afdrukken automatisch archiveren`,autoArchiveDescription:`3MF-bestanden automatisch opslaan wanneer afdrukken zijn voltooid`,saveThumbnailsDescription:`Voorbeeldafbeeldingen uit 3MF-bestanden extraheren en opslaan`,captureFinishPhotoDescription:`Maak een foto met de printercamera wanneer de afdruk is voltooid. Bambuddy neemt tijdens de afdruk een korte timelapse op zodat de foto kan worden genomen van het moment voordat het bed zakt; het timelapsebestand blijft behouden als je timelapse voor deze afdruk hebt ingeschakeld, anders wordt het automatisch verwijderd nadat de foto is vastgelegd.`,finishPhotoRestorePlate:`Plaat herstellen voor eindfoto`,finishPhotoRestorePlateDescription:`De printer laat de bouwplaat ongeveer 100 mm zakken wanneer een afdruk eindigt, waardoor de voltooide afdruk onder het camerabeeld komt. Bambuddy brengt de plaat terug tot net boven de laatst geprinte laag, maakt de foto en laat hem daarna weer zakken. Wordt overgeslagen wanneer de afdrukhoogte onbekend is of er een andere taak in de wachtrij staat.`,ffmpegNotInstalled:`ffmpeg niet geïnstalleerd`,ffmpegRequired:`Camera-opname vereist ffmpeg. Installeer dit via <brew>brew install ffmpeg</brew> (macOS) of <apt>apt install ffmpeg</apt> (Linux).`,camera:`Camera`,cameraViewMode:`Cameraweergavemodus`,cameraOverlayDescription:`Camera opent in een schaalbare overlay op het hoofdscherm`,cameraWindowDescription:`Camera opent in een apart browservenster`,externalCamerasDescription:`Configureer externe camera's ter vervanging van de ingebouwde printercamera. Ondersteunt MJPEG-streams, RTSP, HTTP-momentopnamen en USB-camera's (V4L2). Wanneer ingeschakeld wordt de externe camera gebruikt voor liveweergave en eindfoto's.`,cameraPlaceholderUsb:`Apparaatpad (/dev/video0)`,cameraPlaceholderUrl:`Camera-URL (rtsp://... of http://...)`,cameraTypeMjpeg:`MJPEG-stream`,cameraTypeRtsp:`RTSP-stream`,cameraTypeSnapshot:`HTTP-momentopname`,cameraTypeUsb:`USB-camera (V4L2)`,cameraSnapshotUrl:`Momentopname-URL (optioneel)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`URL voor één frame, gebruikt voor miniaturen in meldingen, eindfoto's, frames van laagtimelapses en plaatdetectie. Timelapse en plaatdetectie vereisen elk hun eigen schakelaar per printer — deze URL is alleen de afbeeldingsbron die ze gebruiken wanneer actief. Laat leeg om beelden uit de bovenstaande livestream vast te leggen. Handig voor go2rtc (/api/frame.jpeg) en IP-camera's met een speciaal snapshot-eindpunt.`,cameraRotation:`Rotatie`,test:`Testen`,connected:`Verbonden`,disconnected:`Niet verbonden`,currency:`Valuta`,defaultFilamentCost:`Standaard filamentkosten (per kg)`,electricityCost:`Elektriciteitskosten per kWh`,energyDisplayMode:`Weergavemodus energie`,energyModePrintDescription:`Dashboard toont de som van energie die tijdens afdrukken is gebruikt`,energyModeTotalDescription:`Dashboard toont het totale energieverbruik van slimme stekkers over de hele levensduur`,fileManager:`Bestandsbeheer`,createArchiveEntry:`Archiefitem maken bij afdrukken`,createArchiveEntryDescription:`Bij afdrukken vanuit Bestandsbeheer optioneel een archiefitem maken`,lowDiskSpaceWarning:`Waarschuwing weinig schijfruimte`,lowDiskSpaceDescription:`Waarschuwing tonen wanneer vrije schijfruimte onder deze drempel komt`,printerFirmware:`Printerfirmware`,checkFirmwareDescription:`Controleren op printerfirmware-updates van Bambu Lab`,bambuddySoftware:`Bambuddy-software`,autoCheckDescription:`Automatisch controleren op nieuwe versies bij opstarten`,checkNow:`Nu controleren`,updateAvailableVersion:`Update beschikbaar: v{{version}}`,releaseNotes:`Releaseopmerkingen`,updateViaDocker:`Bijwerken via Docker Compose:`,composeDirectory:`Compose-map`,composeDirectoryHint:`Map met je docker-compose.yml. Laat leeg om cd weg te laten.`,copyUpdateCommand:`Update-opdracht kopiëren`,updateViaHomeAssistant:`Updates worden beheerd door de Home Assistant Supervisor. Open Instellingen → Add-ons → Bambuddy in Home Assistant om de nieuwe versie te installeren.`,updateViaWindowsInstaller:`Windows-installaties worden bijgewerkt door het installatieprogramma opnieuw uit te voeren. Download hieronder de nieuwe versie — je gegevens, instellingen en printers blijven behouden.`,downloadWindowsInstaller:`Installatieprogramma voor v{{version}} downloaden`,installUpdate:`Update installeren`,latestVersionRunning:`Je gebruikt de nieuwste versie`,failedToCheckUpdates:`Controleren op updates mislukt: {{error}}`,backupRestore:`Back-up en herstel`,backupRestoreDescription:`Instellingen exporteren/importeren en GitHub-back-up configureren`,goToBackup:`Ga naar Back-up`,externalUrl:`Externe URL`,externalUrlDescription:`De externe URL waarop Bambuddy bereikbaar is. Wordt gebruikt voor afbeeldingen in meldingen en externe integraties.`,bambuddyUrl:`Bambuddy-URL`,externalUrlHint:`Inclusief protocol en poort (bijv. http://192.168.1.100:8000)`,ftpRetry:`FTP opnieuw proberen`,ftpRetryDescription:`FTP-bewerkingen opnieuw proberen wanneer de wifi van de printer onbetrouwbaar is. Geldt voor 3MF-downloads, afdrukuploads, timelapse-downloads en firmware-updates.`,autoRetryDescription:`Mislukte FTP-bewerkingen automatisch opnieuw proberen`,retryAttempts:`Aantal pogingen`,retryDelay:`Vertraging tussen pogingen`,connectionTimeout:`Verbindingstime-out`,time_one:`{{count}} keer`,time_other:`{{count}} keer`,second_one:`{{count}} seconde`,second_other:`{{count}} seconden`,nSeconds:`{{count}} seconden`,increaseForWeakWifi:`Verhoog dit voor printers met zwakke wifi`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Verbind met Home Assistant om slimme stekkers via de REST-API van HA te bedienen. Ondersteunt switch-, light-, input_boolean- en script-entiteiten.`,homeAssistantUrl:`Home Assistant-URL`,longLivedAccessToken:`Long-Lived Access Token`,haTokenHint:`Maak een token in HA: Profiel → Long-Lived Access Tokens → Token maken`,connectionSuccessful:`Verbinding geslaagd`,connectionFailed:`Verbinding mislukt`,haConnectionSuccess:`Succesvol verbonden met Home Assistant.`,haConnectionFailed:`Verbinding met Home Assistant mislukt.`,mqttPublishing:`MQTT-publicatie`,mqttDescription:`Publiceer BamBuddy-gebeurtenissen naar een externe MQTT-broker voor integratie met Node-RED, Home Assistant en andere automatiseringssystemen.`,mqttEnableDescription:`Gebeurtenissen publiceren naar externe MQTT-broker`,brokerHostname:`Hostnaam broker`,port:`Poort`,usernameOptional:`Gebruikersnaam (optioneel)`,passwordOptional:`Wachtwoord (optioneel)`,topicPrefix:`Topic-prefix`,topicPrefixHint:`Topics worden: {{prefix}}/printers/<serial>/status, enz.`,prometheusMetrics:`Prometheus-metrics`,prometheusEndpointDescription:`Printermetrics beschikbaar stellen op <code>/api/v1/metrics</code> voor bewaking met Prometheus/Grafana.`,bearerTokenOptional:`Bearer-token (optioneel)`,bearerTokenHint:`Indien ingesteld moeten verzoeken <code>Authorization: Bearer <token></code> bevatten`,metricsConnectionStatus:`Verbindingsstatus`,metricsPrinterState:`Printerstatus (inactief/afdrukken/enz.)`,metricsPrintProgress:`Afdrukvoortgang 0-100%`,metricsBedTemp:`Bedtemperatuur`,metricsNozzleTemp:`Nozzletemperatuur`,metricsPrintsTotal:`Totaal aantal afdrukken per resultaat`,metricsMore:`...en meer (lagen, ventilatoren, wachtrij, filamentverbruik)`,smartPlugsDescription:`Verbind slimme stekkers (Tasmota of Home Assistant) om stroomregeling te automatiseren en energieverbruik van je printers te volgen.`,allOn:`Alles aan`,allOff:`Alles uit`,addSmartPlug:`Slimme stekker toevoegen`,energySummary:`Energieoverzicht`,currentPower:`Huidig vermogen`,plugsOnline:`{{reachable}}/{{total}} stekkers online`,today:`Vandaag`,yesterday:`Gisteren`,total:`Totaal`,enablePlugsForSummary:`Schakel stekkers in om energieoverzicht te zien`,addNotificationProvider:`Toevoegen`,systemBadge:`(Systeem)`,creating:`Maken...`,changing:`Wijzigen...`,deleteUserAndItems:`Gebruiker EN diens items verwijderen`,deleteUserKeepItems:`Gebruiker verwijderen, items behouden (worden eigenaarloos)`,ok:`OK`,twoFa:{totpTitle:`Authenticator-app (TOTP)`,totpDesc:`Gebruik een authenticator-app zoals Google Authenticator, Aegis of Authy.`,emailOtpTitle:`E-mail-OTP`,emailOtpDesc:`Stuur bij inloggen een eenmalige code naar {{email}}.`,emailOtpNoEmail:`Voeg een e-mailadres toe aan je account om deze methode in te schakelen.`,addEmailFirst:`Je account heeft geen e-mailadres. Vraag een beheerder om er een toe te voegen voordat je E-mail-OTP inschakelt.`,setupTotp:`Authenticator-app instellen`,setupAuthApp:`Authenticator-app instellen`,setupInstructions:`Scan onderstaande QR-code met je authenticator-app en bevestig daarna met een code.`,manualEntry:`Kun je niet scannen? Voer dit geheim handmatig in:`,scannedContinue:`Ik heb de code gescand — doorgaan`,enterCodeToConfirm:`Voer de 6-cijferige code uit je authenticator-app in om de installatie te bevestigen.`,activate:`Activeren`,disableTotp:`Authenticator uitschakelen`,disableConfirmHint:`Voer een geldige TOTP-code of back-upcode in om de authenticator uit te schakelen.`,totpDisabled:`Authenticator-app uitgeschakeld.`,emailOtpEnabled:`E-mail-OTP ingeschakeld.`,emailOtpDisabled:`E-mail-OTP uitgeschakeld.`,smtpRequired:`Configureer en test eerst de SMTP-instellingen.`,invalidCode:`Ongeldige code. Probeer het opnieuw.`,enableEmailOtp:`E-mail-OTP inschakelen`,disableEmailOtp:`E-mail-OTP uitschakelen`,emailSetupEnterCode:`Er is een verificatiecode naar je e-mailadres gestuurd. Voer deze hieronder in om te bevestigen dat deze inbox van jou is.`,verifyAndEnable:`Verifiëren en inschakelen`,emailDisablePasswordHint:`Voer je accountwachtwoord in om het uitschakelen van e-mail-OTP te bevestigen.`,passwordPlaceholder:`Voer je wachtwoord in`,backupCodesTitle:`Bewaar je back-upcodes`,backupCodesWarning:`Bewaar deze codes op een veilige plek. Elke code kan maar één keer worden gebruikt en wordt niet opnieuw getoond.`,backupCodesRemaining:`{{count}} back-upcodes resterend`,savedCodes:`Ik heb mijn codes opgeslagen`,regenBackup:`Back-upcodes opnieuw genereren`,regenBackupHint:`Voer je huidige TOTP-code in om 10 nieuwe back-upcodes te genereren. Alle bestaande back-upcodes worden ongeldig.`,newBackupCodes:`Nieuwe back-upcodes`,linkedAccounts:`Gekoppelde SSO-accounts`,linkedAccountsDesc:`Deze externe identiteitsproviders zijn gekoppeld aan je account.`,oidcUnlinked:`Account ontkoppeld.`},sessionPolicy:{title:`Sessiebeleid`,description:`Maximale sessieduur voor nieuwe gebruikerslogins. Reeds uitgegeven tokens behouden hun oorspronkelijke vervaldatum.`,preset24h:`24 uur`,preset7d:`7 dagen`,preset30d:`30 dagen`,customHoursLabel:`Aangepaste sessieduur in uren`,hoursSuffix:`uren`,warning:`Langere sessies verminderen de bescherming door automatisch uitloggen. Alleen aanbevolen voor vertrouwde installaties met één gebruiker.`},oidc:{title:`SSO / OIDC-providers`,desc:`Configureer OpenID Connect-providers om single sign-on via externe identiteitsproviders toe te staan.`,addProvider:`Provider toevoegen`,newProvider:`Nieuwe provider`,empty:`Nog geen OIDC-providers geconfigureerd.`,created:`Provider gemaakt.`,updated:`Provider bijgewerkt.`,deleted:`Provider verwijderd.`,refreshIcon:`Pictogram vernieuwen`,removeIcon:`Pictogram verwijderen`,iconRefreshed:`Pictogram vernieuwd.`,iconRemoved:`Pictogram verwijderd.`,iconFetchFailed:`Pictogram kon niet worden opgehaald van de provider-URL.`,deleteTitle:`Provider verwijderen`,deleteMessage:`"{{name}}" verwijderen? Alle gekoppelde gebruikersaccounts worden ontkoppeld.`,form:{name:`Weergavenaam`,issuerUrl:`Issuer-URL`,clientId:`Client-ID`,clientSecret:`Client Secret`,scopes:`Scopes`,iconUrl:`Pictogram-URL (optioneel)`,enabled:`Ingeschakeld`,autoCreate:`Gebruikers automatisch maken`,autoCreateDesc:`Automatisch een lokaal account maken bij de eerste login.`,autoLink:`Bestaande accounts automatisch koppelen`,autoLinkDesc:`Bestaande lokale accounts bij de eerste login koppelen op basis van een overeenkomend e-mailadres.`,secretHint:`laat leeg om huidige waarde te behouden`,secretPlaceholder:`nieuw geheim`,emailClaim:`E-mailclaim`,emailClaimDesc:`JWT-claim die als e-mailidentiteit wordt gebruikt. Gebruik 'preferred_username' of 'upn' voor Azure Entra ID (dat email_verified niet meestuurt). Gebruik alleen vertrouwde claimnamen.`,emailClaimPlaceholder:`email`,emailClaimCustomClaimAutoLinkWarning:`Aangepaste claims zijn alleen veilig voor automatische koppeling wanneer de waarde door de tenantbeheerder wordt beheerd (bijv. Azure Entra ID upn / preferred_username). Schakel automatisch koppelen niet in als je IdP gebruikers deze claim zelf laat opgeven.`,requireEmailVerified:`Geverifieerd e-mailadres vereisen`,requireEmailVerifiedDesc:`Accepteer de e-mailclaim alleen wanneer de provider deze als geverifieerd markeert.`,requireEmailVerifiedWarning:`Waarschuwing: e-mail wordt ook zonder verificatie geaccepteerd. Gebruik dit alleen met vertrouwde providers.`,requireEmailVerifiedAutoLink:`Schakel automatisch koppelen eerst uit om deze instelling te wijzigen.`,defaultGroup:`Standaardgroep`,defaultGroupDesc:`Groep die aan automatisch gemaakte gebruikers wordt toegewezen. Valt terug op Kijkers indien niet ingesteld.`,defaultGroupViewersFallback:`Kijkers (standaard)`,autologin:`Automatisch inloggen`,autologinDesc:`Stuur niet-geauthenticeerde bezoekers rechtstreeks door naar deze provider. Slechts één provider kan deze vlag hebben.`}},encryption:{title:`MFA-versleutelingsstatus`,enabledFromEnv:`Versleuteling in opslag ingeschakeld (sleutel uit omgevingsvariabele MFA_ENCRYPTION_KEY)`,enabledFromFile:`Versleuteling in opslag ingeschakeld (sleutel geladen uit gegevensmap)`,enabledGenerated:`Versleuteling in opslag ingeschakeld met automatisch gegenereerde sleutel`,notConfigured:`Versleuteling in opslag niet geconfigureerd`,notConfiguredDesc:`TOTP-geheimen en OIDC client_secrets worden als platte tekst opgeslagen. Stel MFA_ENCRYPTION_KEY in of start Bambuddy opnieuw met een schrijfbare gegevensmap om automatisch een sleutel te genereren.`,allEncrypted:`Alle MFA-geheimen zijn versleuteld opgeslagen.`,legacyRowsLabel:`Verouderde rijen met platte tekst`,encryptedRowsLabel:`Versleutelde rijen`,legacyRowsWarning:`{{count}} verouderde rij(en) met platte tekst gedetecteerd. Sla de OIDC-provider opnieuw op of registreer de authenticator-app van de gebruiker opnieuw om naar versleutelde opslag te migreren.`,backupHint:`De automatisch gegenereerde sleutel wordt opgeslagen in DATA_DIR/.mfa_encryption_key en zit in lokale back-up-ZIP's. Bewaar je back-ups veilig of stel MFA_ENCRYPTION_KEY expliciet in.`,decryptionBrokenTitle:`Versleutelingssleutel ontbreekt`,decryptionBrokenError:`{{count}} versleutelde record(s) kunnen niet worden ontsleuteld omdat de versleutelingssleutel niet meer beschikbaar is. Herstel de vorige MFA_ENCRYPTION_KEY of DATA_DIR/.mfa_encryption_key om te herstellen.`,migrationErrorWarning:`{{count}} verouderde rij(en) konden bij het opstarten niet opnieuw worden versleuteld. Controleer de serverlogboeken en start Bambuddy opnieuw om het opnieuw te proberen.`},pipelineLimits:{title:`Limieten slicerpipeline`,maxCopiesLabel:`Max. kopieën per run`,maxCopiesDesc:`Bovengrens voor het aantal kopieën dat operators kunnen aanvragen bij het uitvoeren van een pipeline. Harde serverlimiet is 1000.`},pipelines:{title:`Slicerpipelines`,subtitle:`Herbruikbare bundels met presets (printer + proces + filamenten + bedtype). Sla er een op vanuit het Slice-dialoogvenster en pas deze met één klik toe op het volgende bestand.`,loading:`Pipelines laden…`,loadError:`Pipelines konden niet worden geladen.`,confirmDelete:`Deze pipeline verwijderen? Dit kan niet ongedaan worden gemaakt.`,staleWarning:`Een of meer gekoppelde presets bestaan niet meer. Sla deze pipeline opnieuw op vanuit het Slice-dialoogvenster om dit te herstellen.`,empty:{title:`Nog geen pipelines.`,howto:`Open het Slice-dialoogvenster voor een bestand, kies printer / proces / filamenten / bedtype en klik daarna op "Opslaan als pipeline". Je opgeslagen pipelines verschijnen hier.`},field:{name:`Pipelinenaam`,description:`Beschrijving`,targetPrinter:`Doelprinter`,noTarget:`— Geen doel —`,targetKind:`Doeltype`,targetKindSpecific:`Specifieke printer`,targetKindClass:`Printerklasse`,targetModelClass:`Printermodel`,fanoutStrategy:`Verdelingsstrategie`,fanout:{max_parallel:`Maximaal parallel — verdelen over elke inactieve overeenkomende printer`,round_robin:`Round robin — rouleren door geschikte printers`,fill_one_first:`Eerst één vullen — alle kopieën aan één printer koppelen`},fanoutShort:{max_parallel:`parallel`,round_robin:`round robin`,fill_one_first:`eerst één vullen`}},action:{save:`Opslaan`,cancel:`Annuleren`,rename:`Naam wijzigen`,delete:`Verwijderen`},slot:{printer:`Printer`,process:`Proces`,filament:`Filament`,filamentN:`Filament {{n}}`,filamentAll:`Alle {{n}} sleuven`,bed:`Printbed`},group:{profiles:`Profielen`,filaments:`Filamenten`},searchPlaceholder:`Pipelines zoeken…`,filterTargetType:`Filteren op doeltype`,filterTarget:`Filteren op doel`,filter:{all:`Alle doelen`,noTarget:`Geen doel ingesteld`,count:`{{shown}} / {{total}}`,noMatches:`Geen pipelines komen overeen met de huidige filters.`},toast:{saved:`Pipeline opgeslagen`,saveFailed:`Opslaan mislukt`,deleted:`Pipeline verwijderd`,deleteFailed:`Verwijderen mislukt`},noTargetHint:`Stel een doelprinter in om dit uit te voeren`,noTargetWarning:`Stel een doelprinter in voordat je deze pipeline uitvoert.`,runs:{lastRun:`Laatste run`,status:{queued:`in wachtrij`,slicing:`slicen`,dispatching:`verzenden`,in_progress:`bezig met afdrukken`,completed:`voltooid`,failed:`mislukt`,partial_failure:`gedeeltelijke fout`,cancelled:`geannuleerd`}}}},notification:{printStarted:{title:`Afdruk gestart`,body:`{{printer}}: {{filename}} is begonnen met afdrukken`},printCompleted:{title:`Afdruk voltooid`,body:`{{printer}}: {{filename}} succesvol voltooid`},printFailed:{title:`Afdruk mislukt`,body:`{{printer}}: {{filename}} is mislukt`},printStopped:{title:`Afdruk gestopt`,body:`{{printer}}: {{filename}} is gestopt`},printProgress:{title:`Afdrukvoortgang`,body:`{{printer}}: {{filename}} is {{percent}}% voltooid`},printerOffline:{title:`Printer offline`,body:`{{printer}} is offline`},printerError:{title:`Printerfout`,body:`{{printer}}: {{error}}`},filamentLow:{title:`Weinig filament`,body:`{{printer}}: Filament raakt bijna op`},maintenanceDue:{title:`Onderhoud nodig`,body:`{{printer}}: {{items}} vereisen aandacht`}},errors:{generic:`Er is iets misgegaan`,networkError:`Netwerkfout. Controleer je verbinding.`,notFound:`Niet gevonden`,unauthorized:`Niet geautoriseerd`,serverError:`Serverfout`,validationError:`Controleer je invoer`,printerConnectionFailed:`Verbinding met printer mislukt`,saveFailed:`Wijzigingen opslaan mislukt`,deleteFailed:`Verwijderen mislukt`,loadFailed:`Gegevens laden mislukt`},hmsErrors:{title:`Fouten - {{name}}`,noErrors:`Geen fouten`,viewOnWiki:`Bekijken op Bambu Lab Wiki`,mqttVerifyFailedRemedy:`Schakel Developer Mode op de printer in, start de printer opnieuw en start daarna de taak opnieuw.`,unknownCode:`Onbekende HMS-code — zie de Bambu Lab-wiki voor details.`,clearInstructions:`Wis fouten op de printer om ze hier te verwijderen.`,clearErrors:`Fouten wissen`,clearSuccess:`HMS-fouten gewist`,clearFailed:`HMS-fouten wissen mislukt`,actionSuccess:`Actie naar printer verzonden`,actionFailed:`Actie verzenden mislukt`,runoutExpectedSlot:`Filament is op in {{ranOut}}. De printer wacht nu op compatibel filament in {{expected}}. Plaats een spoel in {{expected}} en selecteer daarna Opnieuw proberen.`,runoutExpectedSlotOnly:`De printer wacht op compatibel filament in {{expected}}. Plaats daar een spoel en selecteer daarna Opnieuw proberen.`,runoutSlotUnknown:`Filament is op en de afdruk is gepauzeerd. Bambuddy kon niet bepalen welke sleuf de printer nu verwacht — controleer het printerscherm voor de gevraagde sleuf.`,actions:{RESUME_PRINTING:`Afdrukken hervatten`,RESUME_PRINTING_DEFECTS:`Hervatten (defecten acceptabel)`,RESUME_PRINTING_PROBELM_SOLVED:`Hervatten (probleem opgelost)`,STOP_PRINTING:`Afdrukken stoppen`,CHECK_ASSISTANT:`Assistent controleren`,FILAMENT_EXTRUDED:`Filament geëxtrudeerd, doorgaan`,RETRY_FILAMENT_EXTRUDED:`Nog niet geëxtrudeerd, opnieuw proberen`,CONTINUE:`Voltooid, doorgaan`,LOAD_VIRTUAL_TRAY:`Filament laden`,OK_BUTTON:`OK`,FILAMENT_LOAD_RESUME:`Filament geladen, hervatten`,JUMP_TO_LIVEVIEW:`Liveweergave bekijken`,NO_REMINDER_NEXT_TIME:`Volgende keer niet herinneren`,REFRESH_NOZZLE:`Opnieuw controleren`,IGNORE_NO_REMINDER_NEXT_TIME:`Negeren. Volgende keer niet herinneren`,IGNORE_RESUME:`Negeren en hervatten`,PROBLEM_SOLVED_RESUME:`Probleem opgelost en hervatten`,TURN_OFF_FIRE_ALARM:`Begrepen, brandalarm uitschakelen.`,RETRY_PROBLEM_SOLVED:`Opnieuw proberen (probleem opgelost)`,CANCLE:`Annuleren`,STOP_DRYING:`Drogen stoppen`,PROCEED:`Doorgaan`,OK_JUMP_RACK:`OK`,ABORT:`Afbreken`,DISABLE_PURIFICATION:`Luchtreiniging voor deze afdruk uitschakelen`,DONT_REMIND_NEXT_TIME:`Niet meer herinneren`,DBL_CHECK_CANCEL:`Annuleren`,DBL_CHECK_DONE:`Klaar`,DBL_CHECK_RETRY:`Opnieuw proberen`,DBL_CHECK_RESUME:`Hervatten`,DBL_CHECK_OK:`Bevestigen`,REMOVE_CLOSE_BTN:`Sluiten`}},mqttDebug:{title:`MQTT-debuglogboek`,searchPlaceholder:`Topic of payload zoeken...`,noMessages:`Nog geen berichten gelogd`,startLoggingHint:`Klik op "Loggen starten" om MQTT-berichten vast te leggen`,noMessagesMatch:`Geen berichten komen overeen met je filter`,adjustFilterHint:`Probeer je zoekopdracht of filtercriteria aan te passen`,incoming:`Inkomend`,outgoing:`Uitgaand`,loggingStopped:`Loggen gestopt`,loggingActive:`Loggen actief - berichten worden automatisch vernieuwd`,startLogging:`Loggen starten`,stopLogging:`Loggen stoppen`,clearLog:`Logboek wissen`,topic:`Topic`,timestamp:`Tijdstempel`,direction:`Richting`,all:`Alle`},printerFiles:{zipStarted_one:`ZIP-download gestart voor {{count}} bestand`,zipStarted_other:`ZIP-download gestart voor {{count}} bestanden`,zipPartial:`ZIP-download gestart met {{successful}} van {{total}} bestanden; de overige konden niet worden opgehaald`,downloadFailed:`Download mislukt: {{error}}`,unknownError:`Onbekende fout`,shiftSelectHint:`Shift-klik om een bereik te selecteren`,selectFile:`{{name}} selecteren`,deselectFile:`{{name}} deselecteren`,title:`Bestandsbeheer`,storageUsed:`Gebruikt:`,storageFree:`Vrij:`,filterPlaceholder:`Bestanden filteren...`,deleteButton:`Verwijderen`,deleteFiles:`{{count}} bestanden verwijderen`,deleteFileConfirm:`"{{name}}" verwijderen? Dit kan niet ongedaan worden gemaakt.`,deleteFilesConfirm:`{{count}} geselecteerde bestanden verwijderen? Dit kan niet ongedaan worden gemaakt.`,noFiles:`Geen bestanden op printer`,printerUnavailable:`De bestandsservice van de printer is niet beschikbaar. Probeer het opnieuw wanneer de printer bereikbaar is.`,loadingFiles:`Bestanden laden...`,failedToLoad:`Bestanden laden mislukt`,toast:{filesDeleted:`{{count}} bestand(en) verwijderd`,deleteFailed:`Verwijderen mislukt: {{error}}`}},confirm:{delete:`Weet je zeker dat je dit wilt verwijderen?`,unsavedChanges:`Je hebt niet-opgeslagen wijzigingen. Weet je zeker dat je wilt vertrekken?`,clearQueue:`Weet je zeker dat je de wachtrij wilt wissen?`},login:{title:`Bambuddy-login`,subtitle:`Log in op je account`,username:`Gebruikersnaam`,usernamePlaceholder:`Voer je gebruikersnaam in`,usernameOrEmail:`Gebruikersnaam of e-mail`,usernameOrEmailPlaceholder:`Gebruikersnaam of @ e-mail`,password:`Wachtwoord`,passwordPlaceholder:`Voer je wachtwoord in`,signIn:`Inloggen`,signingIn:`Inloggen...`,rememberMe:`Onthoud mij`,forgotPassword:`Wachtwoord vergeten?`,autologinFailed:`Automatisch inloggen via SSO is mislukt. Kies hieronder een provider om door te gaan.`,localDisabledNotice:`Lokaal inloggen is uitgeschakeld. Gebruik een van de onderstaande SSO-providers.`,loginSuccess:`Succesvol ingelogd`,loginFailed:`Inloggen mislukt`,enterCredentials:`Voer gebruikersnaam en wachtwoord in`,enterEmail:`Voer je e-mailadres in`,oidcLoginFailed:`OIDC-login mislukt`,oidcErrors:{providerError:`De identiteitsprovider heeft een fout geretourneerd`,missingParameters:`OIDC-callback mist vereiste parameters`,invalidState:`OIDC-status is ongeldig of is al gebruikt`,stateExpired:`OIDC-inlogsessie verlopen — probeer het opnieuw`,providerNotFound:`OIDC-provider niet gevonden`,discoveryFailed:`OIDC-discoverydocument ophalen mislukt`,invalidDiscovery:`OIDC-discoverydocument is ongeldig`,networkError:`Netwerkfout tijdens OIDC-tokenuitwisseling`,badResponse:`Onverwachte reactie tijdens OIDC-tokenuitwisseling`,noIdToken:`OIDC-provider heeft geen ID-token geretourneerd`,validationFailed:`OIDC-tokenvalidatie mislukt`,nonceMismatch:`OIDC-nonce komt niet overeen — mogelijke replay-aanval`,missingSubClaim:`OIDC-token mist de sub-claim`,noLinkedAccount:`Er is geen lokaal account gekoppeld aan deze OIDC-identiteit`,accountInactive:`Je account is inactief`,userResolutionFailed:`Je account kon niet worden bepaald`,internalError:`Er is een interne fout opgetreden tijdens OIDC-login`,tokenExchangeFailed:`OIDC-tokenuitwisseling mislukt`},forgotPasswordTitle:`Wachtwoord vergeten`,forgotPasswordMessage:`Als je je wachtwoord bent vergeten, neem dan contact op met je systeembeheerder om het te laten resetten.`,forgotPasswordEmailMessage:`Voer je e-mailadres in en we sturen je een nieuw wachtwoord.`,emailAddress:`E-mailadres`,emailPlaceholder:`jouw.email@voorbeeld.nl`,cancel:`Annuleren`,sending:`Verzenden...`,sendResetEmail:`Resetmail verzenden`,howToReset:`Zo reset je je wachtwoord:`,resetStep1:`Neem contact op met je Bambuddy-beheerder`,resetStep2:`Vraag om je wachtwoord te resetten in Gebruikersbeheer`,resetStep3:`De beheerder kan een nieuw tijdelijk wachtwoord voor je instellen`,resetStep4:`Log in met het nieuwe wachtwoord en wijzig het in Instellingen`,gotIt:`Begrepen`,resetPassword:{title:`Nieuw wachtwoord instellen`,subtitle:`Voer hieronder je nieuwe wachtwoord in en bevestig het.`,newPassword:`Nieuw wachtwoord`,newPasswordPlaceholder:`Minstens 8 tekens`,confirmPassword:`Wachtwoord bevestigen`,confirmPasswordPlaceholder:`Herhaal nieuw wachtwoord`,saving:`Opslaan…`,submit:`Nieuw wachtwoord instellen`,backToLogin:`Terug naar login`,passwordsDoNotMatch:`Wachtwoorden komen niet overeen`,passwordTooShort:`Wachtwoord moet minstens 8 tekens bevatten`,resetFailed:`Wachtwoord resetten mislukt. De link is mogelijk verlopen.`},twoFA:{title:`Tweefactorauthenticatie`,subtitle:`Je account is beveiligd met 2FA. Voer hieronder de verificatiecode in.`,methodAuthenticator:`Authenticator-app`,methodEmail:`E-mailcode`,methodBackup:`Back-upcode`,instructionsTotp:`Open je authenticator-app en voer de 6-cijferige code voor Bambuddy in.`,instructionsEmail:`Er is een 6-cijferige code naar je e-mailadres gestuurd. Deze verloopt over 10 minuten.`,instructionsEmailNotSent:`Klik op de knop hieronder om een verificatiecode per e-mail te ontvangen.`,instructionsBackup:`Voer een van je 8-teken lange back-upherstelcodes in. Elke code kan maar één keer worden gebruikt.`,sendCodeButton:`Code per e-mail verzenden`,sendingCode:`Verzenden...`,resendCode:`Code opnieuw verzenden`,codeLabel:`Verificatiecode`,backupCodeLabel:`Back-upcode`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Verifiëren`,verifyingButton:`Verifiëren...`,backToLogin:`← Terug naar login`,orContinueWith:`of doorgaan met`,signInWith:`Inloggen met {{provider}}`,enterCode:`Voer de verificatiecode in`,sendCodeFailed:`Verificatiecode verzenden mislukt`,invalidCode:`Ongeldige code. Probeer het opnieuw.`}},setup:{title:`Bambuddy-installatie`,subtitle:`Authenticatie configureren voor je Bambuddy-instantie`,enableAuth:`Authenticatie inschakelen`,adminAccount:`Beheerdersaccount`,adminAccountDesc:`Als er al beheerders bestaan, wordt authenticatie ingeschakeld met de bestaande beheerdersaccounts. Laat de onderstaande velden leeg om bestaande beheerders te gebruiken, of voer nieuwe gegevens in om een nieuwe beheerder te maken.`,adminUsername:`Gebruikersnaam beheerder`,adminPassword:`Wachtwoord beheerder`,optionalIfAdminExists:`(optioneel als er beheerders bestaan)`,adminUsernamePlaceholder:`Voer gebruikersnaam beheerder in (optioneel)`,adminPasswordPlaceholder:`Voer wachtwoord beheerder in (optioneel)`,confirmPassword:`Wachtwoord bevestigen`,confirmPasswordPlaceholder:`Bevestig wachtwoord beheerder`,settingUp:`Instellen...`,completeSetup:`Installatie voltooien`,toast:{authEnabledAdminCreated:`Authenticatie ingeschakeld en beheerdersgebruiker gemaakt`,authEnabledExistingAdmins:`Authenticatie ingeschakeld met bestaande beheerders`,setupCompleted:`Installatie voltooid`,enterBothCredentials:`Voer zowel gebruikersnaam als wachtwoord van de beheerder in, of laat beide leeg om bestaande beheerders te gebruiken`,passwordsDoNotMatch:`Wachtwoorden komen niet overeen`,passwordTooShort:`Wachtwoord moet minstens 6 tekens bevatten`}},changePassword:{title:`Wachtwoord wijzigen`,currentPassword:`Huidig wachtwoord`,currentPasswordPlaceholder:`Voer huidig wachtwoord in`,newPassword:`Nieuw wachtwoord`,newPasswordPlaceholder:`Voer nieuw wachtwoord in (min. 6 tekens)`,confirmPassword:`Nieuw wachtwoord bevestigen`,confirmPasswordPlaceholder:`Bevestig nieuw wachtwoord`,passwordsDoNotMatch:`Wachtwoorden komen niet overeen`,passwordTooShort:`Wachtwoord moet minstens 6 tekens bevatten`,changing:`Wijzigen...`,success:`Wachtwoord succesvol gewijzigd`,failed:`Wachtwoord wijzigen mislukt`},plateAlert:{title:`Afdruk gepauzeerd!`,message:`Objecten gedetecteerd op de bouwplaat. De afdruk is automatisch gepauzeerd. Maak de plaat vrij en hervat de afdruk.`,understand:`Ik begrijp het`},camera:{title:`Cameraweergave`,invalidPrinterId:`Ongeldige printer-ID`,live:`Live`,snapshot:`Momentopname`,restartStream:`Stream opnieuw starten`,refreshSnapshot:`Momentopname vernieuwen`,fullscreen:`Volledig scherm`,exitFullscreen:`Volledig scherm afsluiten`,connectingToCamera:`Verbinding maken met camera...`,capturingSnapshot:`Momentopname vastleggen...`,connectionLost:`Verbinding verbroken`,connectionFailed:`Cameraverbinding mislukt`,reconnecting:`Opnieuw verbinden over {{countdown}}s... (poging {{attempt}}/{{max}})`,reconnectNow:`Nu opnieuw verbinden`,cameraUnavailable:`Camera niet beschikbaar`,cameraUnavailableDesc:`Zorg dat de printer is ingeschakeld en verbonden.`,noCamera:`Geen camera beschikbaar`,retry:`Opnieuw proberen`,cameraStream:`Camerastream`,zoomOut:`Uitzoomen`,zoomIn:`Inzoomen`,resetZoom:`Zoom resetten`,recording:`Opnemen`,startRecording:`Opname starten`,stopRecording:`Opname stoppen`,chamberLight:`Kamerverlichting omschakelen`,unavailable:`Camera niet beschikbaar`,diagnose:{button:`Diagnose`,modalTitle:`Cameradiagnose`,running:`Diagnose uitvoeren...`,runFailed:`Diagnose kon niet worden uitgevoerd: {{error}}`,retry:`Opnieuw uitvoeren`,stage:{tcp_reachable:`Netwerkbereikbaarheid`,first_frame:`Frame vastleggen`,live_stream_active:`Livestream actief`},summary:{all_ok:`Camera werkt. De diagnose heeft alle stappen succesvol voltooid.`,live_stream_active_healthy:`Camera streamt momenteel met recente frames — geen test nodig.`,printer_unreachable:`Printer is niet bereikbaar. Controleer het IP-adres, de netwerkverbinding en of de printer is ingeschakeld.`,camera_port_closed:`Printer is bereikbaar maar de camerapoort is gesloten. Zorg dat LAN-only-modus en Developer Mode zijn ingeschakeld in de printerinstellingen.`,no_frame:`Verbonden met de camera, maar er zijn geen frames ontvangen. Probeer opnieuw of controleer of de camera is ingeschakeld in de printerinstellingen.`,unknown_failure:`Cameradiagnose is om onbekende reden mislukt. Controleer het supportlogboek voor details.`},meta:{protocol:`Protocol`,port:`Poort`,profile:`Profiel`}}},groups:{title:`Groepsbeheer`,subtitle:`Machtigingsgroepen beheren voor toegangscontrole`,backToSettings:`Terug naar Instellingen`,createGroup:`Groep maken`,noPermission:`Je hebt geen toestemming om deze pagina te openen.`,system:`Systeem`,noDescription:`Geen beschrijving`,usersCount:`{{count}} gebruikers`,permissionsCount:`{{count}} machtigingen`,edit:`Bewerken`,delete:`Verwijderen`,toast:{created:`Groep succesvol gemaakt`,updated:`Groep succesvol bijgewerkt`,deleted:`Groep succesvol verwijderd`,enterGroupName:`Voer een groepsnaam in`},modal:{editGroup:`Groep bewerken`,createGroup:`Groep maken`,cancel:`Annuleren`,saving:`Opslaan...`,creating:`Maken...`,saveChanges:`Wijzigingen opslaan`},form:{groupName:`Groepsnaam`,groupNamePlaceholder:`Voer groepsnaam in`,systemGroupWarning:`Namen van systeemgroepen kunnen niet worden gewijzigd`,description:`Beschrijving`,descriptionPlaceholder:`Voer beschrijving in (optioneel)`,permissions:`Machtigingen ({{count}} geselecteerd)`},deleteModal:{title:`Groep verwijderen`,message:`Weet je zeker dat je deze groep wilt verwijderen? Gebruikers in deze groep verliezen deze machtigingen.`,confirm:`Groep verwijderen`},editor:{title:`Groep bewerken`,createTitle:`Groep maken`,search:`Machtigingen zoeken...`,selectAll:`Alles selecteren`,clearAll:`Alles wissen`,permissionsSelected:`{{count}} geselecteerd`,noResults:`Geen machtigingen komen overeen met je zoekopdracht`,websocketHint:`Vereist voor live-updates. Zonder dit valt de interface terug op periodieke polling.`}},users:{title:`Gebruikersbeheer`,subtitle:`Gebruikers en hun toegang tot je Bambuddy-instantie beheren`,backToSettings:`Terug naar Instellingen`,createUser:`Gebruiker maken`,noPermission:`Je hebt geen toestemming om deze pagina te openen.`,admin:`Beheerder`,noGroups:`Geen groepen`,active:`Actief`,inactive:`Inactief`,edit:`Bewerken`,delete:`Verwijderen`,system:`Systeem`,noGroupsAvailable:`Geen groepen beschikbaar`,table:{username:`Gebruikersnaam`,groups:`Groepen`,status:`Status`,actions:`Acties`},toast:{created:`Gebruiker succesvol gemaakt`,updated:`Gebruiker succesvol bijgewerkt`,deleted:`Gebruiker succesvol verwijderd`,fillRequired:`Vul alle verplichte velden in`,passwordsDoNotMatch:`Wachtwoorden komen niet overeen`,passwordTooShort:`Wachtwoord moet minstens 6 tekens bevatten`,ldapProvisioned:`LDAP-gebruiker "{{username}}" ingericht`},modal:{createUser:`Gebruiker maken`,editUser:`Gebruiker bewerken`,cancel:`Annuleren`,creating:`Maken...`,saving:`Opslaan...`,saveChanges:`Wijzigingen opslaan`,advancedAuthSubtitle:`met Geavanceerde authenticatie`,tabsAriaLabel:`Gebruikersbron`,localTab:`Lokaal`,ldapTab:`LDAP`,ldapSearchLabel:`Directory zoeken`,ldapSearchPlaceholder:`Typ een gebruikersnaam, naam of e-mailadres...`,ldapMinChars:`Typ minstens 2 tekens om te zoeken`,ldapTypeToSearch:`Begin te typen om in de LDAP-directory te zoeken`,ldapSearching:`Directory doorzoeken...`,ldapNoResults:`Geen overeenkomende gebruikers in de directory`,ldapSearchError:`Zoeken in directory mislukt. Controleer de status van de LDAP-server.`,ldapAlreadyProvisioned:`Al ingericht`,ldapSelectedLabel:`Geselecteerd`,ldapProvision:`Gebruiker inrichten`,ldapProvisioning:`Inrichten...`,ldapErrorProvision:`Inrichten mislukt. Controleer de status van de LDAP-server en probeer opnieuw.`},form:{username:`Gebruikersnaam`,usernamePlaceholder:`Voer gebruikersnaam in`,email:`E-mail`,emailPlaceholder:`user@example.com`,password:`Wachtwoord`,passwordPlaceholder:`Voer wachtwoord in`,confirmPassword:`Wachtwoord bevestigen`,confirmPasswordPlaceholder:`Bevestig wachtwoord`,newPasswordPlaceholder:`Voer nieuw wachtwoord in`,confirmNewPasswordPlaceholder:`Bevestig nieuw wachtwoord`,leaveBlankToKeep:`laat leeg om huidige waarde te behouden`,groups:`Groepen`,optional:`optioneel`,autoGeneratedPassword:`Een veilig wachtwoord wordt automatisch gegenereerd en per e-mail naar de gebruiker gestuurd.`,passwordManagedByAdvancedAuth:`Wachtwoord wordt beheerd door Geavanceerde authenticatie. Gebruik "Wachtwoord resetten" om via e-mail een nieuw wachtwoord naar de gebruiker te sturen.`,resetPassword:`Wachtwoord resetten`,resettingPassword:`Wachtwoord resetten...`},deleteModal:{title:`Gebruiker verwijderen`,message:`Weet je zeker dat je deze gebruiker wilt verwijderen? Deze actie kan niet ongedaan worden gemaakt.`,confirm:`Gebruiker verwijderen`}},streamOverlay:{title:`Streamoverlay`,invalidPrinterId:`Ongeldige printer-ID`,cameraStream:`Camerastream`,progress:`Voortgang`,eta:`ETA`,printerIdle:`Printer is inactief`,printerOffline:`Printer offline`,builder:{title:`Streamingoverlay`,description:`Bouw de URL voor een streamingoverlay — een camerabeeld op volledig scherm met live afdrukgegevens eroverheen, voor OBS, een wanddisplay of elke browserbron. Kies de velden die je wilt en kopieer de URL.`,printer:`Printer`,size:`Tekstgrootte`,sizeSmall:`Klein`,sizeMedium:`Middelgroot`,sizeLarge:`Groot`,fps:`Framesnelheid`,fpsHint:`A1- en P1-camera's halen maximaal ongeveer 5 fps, ongeacht wat je instelt.`,token:`Token voor streamingoverlay (optioneel)`,tokenHint:`Alleen nodig wanneer login is ingeschakeld: OBS heeft geen eigen sessie. Maak hierboven een token met het bereik Streamingoverlay.`,tokenWarning:`Deze URL bevat een token — iedereen die hem kan lezen kan de stream bekijken en de bestandsnaam zien. Trek het token in om de toegang te stoppen.`,fields:`Velden om te tonen`,fieldPrinter:`Printernaam`,fieldFilename:`Bestandsnaam`,fieldStatus:`Status`,fieldProgress:`Voortgangsbalk`,fieldLayers:`Aantal lagen`,fieldEta:`Resterende tijd en ETA`,fieldCamera:`Camerabeeld`,chamberHint:`Kamertemperatuur verschijnt alleen op modellen met een echte kamersensor — P1- en A1-printers melden een betekenisloze waarde, daarom wordt die daar weggelaten.`,urlTitle:`Overlay-URL`,open:`Open`,showPreview:`Voorbeeld tonen`,hidePreview:`Voorbeeld verbergen`,previewTitle:`Overlayvoorbeeld`},status:{printing:`Bezig met afdrukken`,paused:`Gepauzeerd`,finished:`Voltooid`,failed:`Mislukt`,idle:`Inactief`,unknown:`Onbekend`}},profiles:{title:`Profielen`,subtitle:`Beheer je slicerpresets en pressure-advance-kalibraties`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Lokale profielen`,kprofiles:`K-profielen`},orcaCloud:{connectedAs:`Verbonden als`,connectedShort:`Verbonden met Orca Cloud`,logout:`Verbinding verbreken`,noLogoutPermission:`Je hebt geen toestemming om de verbinding te verbreken`,noConnectPermission:`Je hebt geen toestemming om verbinding te maken met Orca Cloud`,retry:`Opnieuw proberen`,connectButton:`Orca Cloud verbinden`,connect:{title:`Verbinden met Orca Cloud`,description:`Log in op je Orca Cloud-account om je slicerprofielen met Bambuddy te synchroniseren.`},device:{title:`Bambuddy goedkeuren in Orca Cloud`,instruction:`Open Orca Cloud en keur deze code goed. Bambuddy maakt automatisch verbinding zodra je goedkeurt.`,codeLabel:`Je koppelcode`,openButton:`Orca Cloud-goedkeuringspagina openen`,manualHint:`Of ga naar {{url}} en voer bovenstaande code in.`,waiting:`Wachten op je goedkeuring…`,cancel:`Annuleren`},profiles:{title:`Je Orca Cloud-profielen ({{count}})`,refresh:`Vernieuwen`,empty:`Nog geen profielen gevonden in je Orca Cloud-account.`},toast:{disconnected:`Verbinding met Orca Cloud verbroken`},errors:{startFailed:`Koppelen met Orca Cloud kon niet worden gestart.`,denied:`De koppeling is geweigerd in Orca Cloud.`,expired:`De koppelcode is verlopen. Klik op Verbinden om opnieuw te proberen.`,pollFailed:`De verbinding ging verloren tijdens het wachten op goedkeuring. Probeer het opnieuw.`}},localProfiles:{title:`Lokale profielen`,subtitle:`Slicepresets importeren en beheren vanuit OrcaSlicer`,import:`Profielen importeren`,importDesc:`Sleep .bbscfg-, .bbsflmt-, .orca_filament-, .zip- of .json-bestanden hierheen`,importing:`Importeren...`,search:`Lokale presets zoeken...`,noPresets:`Nog geen lokale presets`,noSearchResults:`Geen presets komen overeen met je zoekopdracht`,badge:`Lokaal`,edit:`Bewerken`,delete:`Verwijderen`,cancel:`Annuleren`,deleteConfirmTitle:`Preset verwijderen`,deleteConfirm:`Weet je zeker dat je deze preset wilt verwijderen? Dit kan niet ongedaan worden gemaakt.`,source:`Bron`,inheritsFrom:`Erft van`,filamentType:`Type`,vendor:`Leverancier`,compatiblePrinters:`Printers`,nozzleTemp:`Nozzletemp.`,cost:`Kosten`,density:`Dichtheid`,pressureAdvance:`Pressure Advance`,filament:`Filament`,process:`Proces`,printer:`Printer`,toast:{importSuccess:`{{count}} preset(s) geïmporteerd`,importSkipped:`{{count}} preset(s) overgeslagen (duplicaten)`,importError:`{{count}} fout(en) tijdens importeren`,deleted:`Preset verwijderd`,updated:`Preset bijgewerkt`}},connectedAs:`Verbonden als`,signInExpiredTitle:`Bambu Cloud-login verlopen`,signInExpiredBody:`Bambu Lab accepteert het opgeslagen token niet meer. Log opnieuw in om cloudprofielen, MakerWorld-imports en firmwarecontroles te herstellen.`,logout:`Uitloggen`,noLogoutPermission:`Je hebt geen toestemming om uit te loggen`,failedToLoad:`Profielen laden mislukt`,retry:`Opnieuw proberen`,time:{justNow:`Zojuist`,minsAgo:`{{count}}m geleden`,hoursAgo:`{{count}}u geleden`,daysAgo:`{{count}}d geleden`},toast:{loggedOut:`Uitgelogd`},login:{title:`Verbinden met Bambu Cloud`,subtitle:`Synchroniseer je slicerpresets tussen apparaten`,email:`E-mail`,password:`Wachtwoord`,region:`Regio`,regionGlobal:`Wereldwijd`,regionChina:`China`,verificationCode:`Verificatiecode`,totpCode:`Authenticatorcode`,checkEmail:`Controleer je e-mail ({{email}}) op een 6-cijferige code`,enterTotpHint:`Voer de 6-cijferige code uit je authenticator-app in`,accessToken:`Toegangstoken`,accessTokenHint:`Plak je Bambu Cloud-toegangstoken. Accounts in de China-regio moeten deze methode gebruiken (telefoongebonden — inloggen via e-mail niet beschikbaar). Zie de wiki voor het ophalen van het token uit MakerWorld-cookies.`,back:`Terug`,loginButton:`Inloggen`,verifyButton:`Verifiëren`,setTokenButton:`Token instellen`,useToken:`In plaats daarvan toegangstoken gebruiken`,captchaTitle:`Bambu Cloud vraagt om een CAPTCHA`,captchaBody:`Bambu controleert je netwerk voordat inloggen wordt geaccepteerd en deze controle kan niet vanuit Bambuddy worden beantwoord. Je e-mailadres en wachtwoord zijn niet het probleem. De blokkering is gekoppeld aan je openbare IP-adres en verdwijnt normaal vanzelf binnen enkele uren — herhaaldelijk opnieuw proberen laat de blokkering langer duren. Gebruik om nu in te loggen een toegangstoken uit een browsersessie.`,useEmail:`In plaats daarvan inloggen met e-mail`,toast:{loggedIn:`Succesvol ingelogd`,codeSent:`Verificatiecode naar je e-mail gestuurd`,enterTotp:`Voer code uit je authenticator-app in`,tokenSet:`Token succesvol ingesteld`}},presets:{myPreset:`Mijn preset (bewerkbaar)`,duplicate:`Dupliceren`,editable:`Bewerkbaar`,failedToLoadDetails:`Presetdetails laden mislukt`,deleteConfirm:`Deze preset verwijderen?`,deleteWarning:`Hiermee wordt "{{name}}" permanent uit Bambu Cloud verwijderd. Dit kan niet ongedaan worden gemaakt.`,noDuplicatePermission:`Je hebt geen toestemming om presets te dupliceren`,noEditPermission:`Je hebt geen toestemming om presets te bewerken`,noDeletePermission:`Je hebt geen toestemming om presets te verwijderen`,types:{filament:`Filamentpreset`,printer:`Printerpreset`,process:`Procespreset`},toast:{deleted:`Preset verwijderd`,created:`Preset gemaakt`,updated:`Preset bijgewerkt`,duplicated:`Preset gedupliceerd`,fieldAdded:`Veld "{{key}}" toegevoegd`,exported:`Preset geëxporteerd`},baseLabel:`Basis: {{name}}`,currentLabel:`Huidig: {{name}}`,newPreset:`Nieuwe preset`,editPreset:`Preset bewerken`,duplicatePreset:`Preset dupliceren`,createNewPreset:`Nieuwe preset maken`,customizeSettings:`Instellingen voor je nieuwe preset aanpassen`,compareWithBase:`Vergelijken met basispreset`,compare:`Vergelijken`,basePreset:`Basispreset`,selectBasePreset:`Basispreset selecteren...`,presetName:`Presetnaam`,myCustomPreset:`Mijn aangepaste preset`,inheritsFrom:`Erft van`,dropJsonToImport:`Sleep JSON om te importeren`,tabs:{common:`Algemeen`,allFields:`Alle velden`},availableFields:`Beschikbare velden`,searchFieldsPlaceholder:`Velden zoeken...`,noMatchingFields:`Geen overeenkomende velden`,allFieldsAdded:`Alle velden toegevoegd`,addCustomField:`Aangepast veld toevoegen`,yourOverrides:`Je overschrijvingen`,noOverridesYet:`Nog geen overschrijvingen`,clickFieldsToAdd:`Klik links op velden om ze toe te voegen`,saveAsTemplate:`Opslaan als sjabloon`,jsonTip:`Tip: sleep een .json-bestand ergens in dit venster om instellingen te importeren`},cloudView:{searchPlaceholder:`Presets zoeken...`,templates:`Sjablonen`,refresh:`Vernieuwen`,newPreset:`Nieuwe preset`,clearFilters:`Filters wissen`,compareMode:`Vergelijkingsmodus`,selectAnotherPreset:`Selecteer een andere {{type}}-preset`,clickTwoPresets:`Klik op twee presets van hetzelfde type om te vergelijken`,selectFirst:`1. Selecteer eerste`,selectSecond:`2. Selecteer tweede`,compareNow:`Nu vergelijken`,lastSynced:`Laatst gesynchroniseerd:`,showingCount:`{{showing}} van {{total}} presets weergegeven`,noPresetsFound:`Geen presets gevonden`,columns:{filament:`Filament`,process:`Proces`,printer:`Printer`},noFilamentPresets:`Geen filamentpresets`,noProcessPresets:`Geen procespresets`,noPrinterPresets:`Geen printerpresets`,filters:{type:`Type`,owner:`Eigenaar`,printer:`Printer`,nozzle:`Nozzle`,filament:`Filament`,layer:`Laag`,all:`Alle`,myPresets:`Mijn presets`,builtIn:`Ingebouwd`,process:`Proces`},noTemplatesPermission:`Je hebt geen toestemming om sjablonen te beheren`,noRefreshPermission:`Je hebt geen toestemming om profielen te vernieuwen`,noCreatePermission:`Je hebt geen toestemming om presets te maken`},templates:{title:`Snelle sjablonen`,noTemplates:`Nog geen sjablonen`,createFirst:`Maak sjablonen vanuit de preseteditor`,typeFilter:`Type:`,deleteTitle:`Sjabloon verwijderen`,deleteWarning:`Deze actie kan niet ongedaan worden gemaakt`,deleteConfirm:`Weet je zeker dat je "{{name}}" wilt verwijderen?`,namePlaceholder:`Sjabloonnaam`,descriptionPlaceholder:`Beschrijving`,settingsJson:`Instellingen (JSON)`,fieldsCount:`{{count}} velden`,shownInModals:`Getoond in vensters`,hiddenInModals:`Verborgen in vensters`,apply:`Toepassen`,toast:{deleted:`Sjabloon verwijderd`,updated:`Sjabloon bijgewerkt`,created:`Sjabloon gemaakt`,applied:`Sjabloon toegepast`}}},support:{debugLoggingActive:`Debuglogboekregistratie is actief`,manageLogs:`Beheren`,collectItem7:`Printerverbinding en firmwareversies`,collectItem8:`Integratiestatus (Spoolman, MQTT, HA)`,collectItem9:`Netwerkinterfaces (alleen subnetten)`,collectItem10:`Python-pakketversies`,collectItem11:`Databasegezondheidscontroles`,collectItem12:`Docker-omgevingsdetails`,bundleGenerating:`Bundel genereren...`,bundleStepConnection:`Printerverbindingscontroles uitvoeren`,bundleStepVirtualPrinters:`Installatiecontroles virtuele printer uitvoeren`,bundleStepLogScan:`Recente logboeken scannen op bekende problemen`,bundleStepBuild:`Supportbundel-ZIP maken`},fileManager:{variants:{badge:`{{count}} versies`,groupAction:`Als versies groeperen`,groupTooltip:`Markeer deze bestanden als dezelfde taak, gesliced voor verschillende printers`,grouped:`{{count}} bestanden als versies gegroepeerd`,printAlternatives:`Afdrukken ({{count}} alternatieven)`},title:`Bestandsbeheer`,subtitle:`Organiseer en beheer je afdrukbestanden`,uploadFiles:`Bestanden uploaden`,newFolder:`Nieuwe map`,folderName:`Mapnaam`,folderNamePlaceholder:`bijv. Functionele onderdelen`,renameFile:`Bestand hernoemen`,renameFolder:`Map hernoemen`,invalidFilenameChar:`Het teken "{{char}}" is niet toegestaan in bestandsnamen voor afdrukken. De SD-kaart van de printer weigert: < > : " / \\ | ? *`,moveFiles:`{{count}} bestand(en) verplaatsen`,rootNoFolder:`Hoofdmap (geen map)`,current:`huidig`,linkFolder:`Map koppelen`,linkFolderDescription:`Koppel "{{name}}" aan een project of archief voor snelle toegang.`,project:`Project`,archive:`Archief`,noProjectsFound:`Geen projecten gevonden`,noArchivesFound:`Geen archieven gevonden`,unlink:`Ontkoppelen`,link:`Koppelen`,dragDropFiles:`Sleep bestanden hierheen`,dropFilesHere:`Zet bestanden hier neer`,releaseToUpload:`Loslaten om te uploaden`,orClickToBrowse:`of klik om te bladeren`,allFileTypesSupported:`Alle bestandstypen worden ondersteund. ZIP-bestanden worden uitgepakt.`,zipFilesDetected:`ZIP-bestanden gedetecteerd`,zipExtractOptions:`ZIP-bestanden worden uitgepakt. Kies hoe de mapstructuur moet worden verwerkt:`,preserveZipStructure:`Mapstructuur uit ZIP behouden`,createFolderFromZip:`Map maken op basis van ZIP-bestandsnaam`,stlThumbnailGeneration:`STL-miniaturen genereren`,zipMayContainStl:`ZIP-bestanden kunnen STL-bestanden bevatten. Miniaturen kunnen tijdens het uitpakken worden gegenereerd.`,thumbnailsCanBeGenerated:`Voor STL-bestanden kunnen miniaturen worden gegenereerd. Grote modellen kunnen langer duren om te verwerken.`,generateThumbnailsForStl:`Miniaturen genereren voor STL-bestanden`,threemfDetected:`3MF-bestanden gedetecteerd`,threemfExtractionInfo:`Printermodel, materiaal, kleur en afdrukinstellingen worden automatisch uit 3MF-bestanden gehaald.`,willBeExtracted:`Wordt uitgepakt`,filesExtracted:`{{count}} bestanden uitgepakt`,uploadComplete:`Upload voltooid: {{succeeded}} geslaagd`,uploadFailed:`Upload mislukt`,zipFilesFailed:`{{count}} bestanden mislukt`,uploading:`Uploaden...`,changeLink:`Koppeling wijzigen...`,linkTo:`Koppelen aan...`,linkToProjectOrArchive:`Koppelen aan project of archief`,generateThumbnail:`Miniatuur genereren`,generateThumbnails:`Miniaturen genereren`,generateThumbnailsForMissing:`Miniaturen genereren voor STL-bestanden die ze missen`,gridView:`Rasterweergave`,listView:`Lijstweergave`,lowDiskSpaceWarning:`Waarschuwing weinig schijfruimte`,lowDiskSpaceDetails:`Slechts {{free}} vrij van {{total}} totaal. De drempel is in de instellingen ingesteld op {{threshold}} GB.`,files:`Bestanden`,folders:`Mappen`,size:`Grootte`,free:`Vrij`,allFiles:`Alle bestanden`,allExternal:`Extern`,externalIsEmpty:`Geen externe bestanden`,externalEmptyDescription:`Bestanden in je gekoppelde externe mappen verschijnen hier.`,wrap:`Regelafbreking`,enableTextWrapping:`Tekstterugloop inschakelen`,disableTextWrapping:`Tekstterugloop uitschakelen`,collapse:`Inklappen`,collapseFoldersByDefault:`Mappen standaard inklappen`,expandFoldersByDefault:`Mappen standaard uitklappen`,folderSort:`Mappen sorteren`,folderSortByName:`Op naam`,folderSortByActivity:`Op recente activiteit`,dragToResizeTooltip:`Sleep om grootte te wijzigen, dubbelklik om te resetten`,searchFiles:`Bestanden zoeken...`,searchSubfoldersHint:`Inclusief submappen`,readme:{truncated:`Afgekapt`,show:`README tonen`,hide:`README verbergen`,label:`README`},tags:{title:`Tags`,subtitle:`Label bestanden voor flexibele filtering — speelgoed, kindveilig, alleen PETG, wat je maar wilt.`,manage:`Tags`,manageTitle:`Tagcatalogus beheren`,add:`Nieuwe tag`,edit:`Tag hernoemen`,name:`Naam`,fileCount:`Bestanden`,empty:`Nog geen tags. Maak er een om bestanden te gaan labelen.`,noMatches:`Geen overeenkomende tags.`,createPlaceholder:`bijv. speelgoed, kindveilig, petg`,createButton:`Maken`,nameRequired:`Naam is verplicht.`,searchPlaceholder:`Tags filteren...`,created:`Tag gemaakt.`,updated:`Tag hernoemd.`,deleted:`Tag verwijderd.`,saveFailed:`Tag kon niet worden opgeslagen.`,deleteFailed:`Tag kon niet worden verwijderd.`,applyFailed:`Tags konden niet worden toegepast.`,applyAdd:`Tags toevoegen`,applyRemove:`Tags verwijderen`,applyAddSuccess:`{{count}} tag(s) toegevoegd aan {{files}} bestand(en).`,applyRemoveSuccess:`{{count}} tag(s) verwijderd van {{files}} bestand(en).`,actionAdd:`Toevoegen aan geselecteerde bestanden`,actionRemove:`Verwijderen van geselecteerde bestanden`,tagAction:`Tag`,bulkTitle:`{{count}} geselecteerde bestand(en) taggen`,bulkTooltip:`Tags toevoegen aan of verwijderen van elk geselecteerd bestand.`,noPermission:`Je hebt geen toestemming om bestanden te taggen.`,filterLabel:`Filteren op:`,clearAll:`Alles wissen`,confirmDelete:`Tag "{{name}}" verwijderen?`,confirmDeleteMessage:`Hiermee wordt de tag uit de catalogus verwijderd. Bestanden behouden hun andere tags.`,confirmDeleteInUseMessage:`Deze tag staat op {{count}} bestand(en). Bij verwijderen verdwijnt het label van al deze bestanden; de bestanden zelf blijven intact.`,editAria:`{{name}} bewerken`,deleteAria:`{{name}} verwijderen`},allTypes:`Alle typen`,prints:`Afdrukken`,ascending:`Oplopend`,descending:`Aflopend`,showModified:`Wijzigingsdatums tonen`,hideModified:`Wijzigingsdatums verbergen`,lastModified:`Laatst gewijzigd`,lastActivity:`Laatste activiteit`,resultsCount:`{{showing}} van {{total}} bestanden`,selectAll:`Alles selecteren`,deselectAll:`Alles deselecteren`,selected:`{{count}} geselecteerd`,adding:`Toevoegen...`,loadingFiles:`Bestanden laden...`,folderIsEmpty:`Map is leeg`,noFilesYet:`Nog geen bestanden`,folderEmptyDescription:`Upload bestanden of verplaats bestanden naar deze map om te beginnen.`,noFilesDescription:`Upload bestanden om je afdrukgerelateerde bestanden te organiseren.`,noMatchingFiles:`Geen overeenkomende bestanden`,noMatchingFilesDescription:`Geen bestanden komen overeen met je huidige zoek- of filtercriteria.`,clearFilters:`Filters wissen`,printedCount:`{{count}}x afgedrukt`,uploadedBy:`Geüpload door`,deleteFolder:`Map verwijderen`,deleteFile:`Bestand verwijderen`,deleteFilesCount:`{{count}} bestanden verwijderen`,deleteFolderConfirm:`Weet je zeker dat je deze map wilt verwijderen? Alle bestanden erin worden ook verwijderd.`,deleteFileConfirm:`Weet je zeker dat je dit bestand wilt verwijderen?`,deleteFilesConfirm:`Weet je zeker dat je {{count}} geselecteerde bestanden wilt verwijderen? Deze actie kan niet ongedaan worden gemaakt.`,deleting:`Verwijderen...`,noPermissionRenameFolder:`Je hebt geen toestemming om mappen te hernoemen`,noPermissionLinkFolder:`Je hebt geen toestemming om mappen te koppelen`,noPermissionDeleteFolder:`Je hebt geen toestemming om mappen te verwijderen`,onlyEmptyFoldersDeletable:`Je kunt alleen lege mappen verwijderen`,noPermissionPrint:`Je hebt geen toestemming om af te drukken`,noPermissionAddToQueue:`Je hebt geen toestemming om aan de wachtrij toe te voegen`,noPermissionSlice:`Je hebt geen toestemming om bestanden te slicen`,noPermissionDownload:`Je hebt geen toestemming om bestanden te downloaden`,noPermissionPreview:`Je hebt geen toestemming om bestanden te bekijken`,preview3d:`3D-voorbeeld`,noPermissionRenameFile:`Je hebt geen toestemming om dit bestand te hernoemen`,noPermissionGenerateThumbnail:`Je hebt geen toestemming om miniaturen te genereren`,noPermissionDeleteFile:`Je hebt geen toestemming om dit bestand te verwijderen`,noPermissionCreateFolder:`Je hebt geen toestemming om mappen te maken`,noPermissionUpload:`Je hebt geen toestemming om bestanden te uploaden`,noPermissionMoveFiles:`Je hebt geen toestemming om bestanden te verplaatsen`,noPermissionDeleteFiles:`Je hebt geen toestemming om bestanden te verwijderen`,linkExternal:`Extern koppelen`,linkExternalFolder:`Externe map koppelen`,linkExternalFolderDescription:`Koppel een hostmap (NAS, USB, netwerkshare) aan Bestandsbeheer. Bestanden worden niet gekopieerd — ze worden rechtstreeks vanaf het oorspronkelijke pad benaderd.`,externalFolderNamePlaceholder:`bijv. NAS-afdrukken`,externalPath:`Hostpad`,externalPathHelp:`Absoluut pad naar de map op de Docker-host. Moet als bind-mount in de container zijn gekoppeld.`,readOnly:`Alleen-lezen`,readOnlyHelp:`voorkomt uploads en verwijderingen`,showHiddenFiles:`Verborgen bestanden tonen (dotfiles)`,externalFolder:`Externe map`,scanFolder:`Scannen`,toast:{folderCreated:`Map gemaakt`,openInSlicerFailed:`Kon niet openen in slicer`,folderDeleted:`Map verwijderd`,fileDeleted:`Bestand verwijderd`,filesDeleted:`{{count}} bestanden verwijderd`,filesMoved:`Bestanden verplaatst`,folderLinked:`Map gekoppeld`,folderUnlinked:`Map ontkoppeld`,externalFolderLinked:`Externe map gekoppeld en gescand`,folderScanned:`Scan voltooid: {{added}} toegevoegd, {{removed}} verwijderd`,addedToQueue:`{{count}} bestand(en) aan wachtrij toegevoegd`,addedToQueuePartial:`{{added}} bestand(en) toegevoegd, {{failed}} mislukt`,failedToAddToQueue:`Bestanden toevoegen mislukt: {{error}}`,fileRenamed:`Bestand hernoemd`,folderRenamed:`Map hernoemd`,thumbnailsGenerated:`{{count}} miniatuur/miniaturen gegenereerd`,thumbnailsGeneratedPartial:`{{succeeded}} miniatuur/miniaturen gegenereerd, {{failed}} mislukt`,noStlMissingThumbnails:`Geen STL-bestanden zonder miniaturen`,failedToGenerateThumbnails:`Miniaturen genereren mislukt: {{error}}`,thumbnailGenerated:`Miniatuur gegenereerd`,failedToGenerateThumbnail:`Miniatuur genereren mislukt: {{error}}`}},projects:{parentLabel:`Bovenliggend project`,parentNone:`Geen (project op hoogste niveau)`,parentHint:`Plaats dit project onder een ander project zodat de cijfers worden opgeteld in een hoofdproject`,partOf:`Onderdeel van {{name}}`,subProjectCount:`{{count}} subprojecten`,subProjectsOf:`Subprojecten van {{name}}`,collapseSubProjects:`Subprojecten inklappen`,expandSubProjects:`Subprojecten uitklappen`,title:`Projecten`,subtitle:`Organiseer en volg je 3D-printprojecten`,newProject:`Nieuw project`,editProject:`Project bewerken`,deleteProject:`Project verwijderen`,projectName:`Projectnaam`,description:`Beschrijving`,noProjects:`Nog geen projecten`,noProjectsFiltered:`Geen {{status}} projecten`,noProjectsFilteredHelp:`Je hebt geen {{status}} projecten. Projecten verschijnen hier wanneer hun status verandert.`,createFirst:`Maak je eerste project om gerelateerde afdrukken te organiseren, voortgang bij te houden en je builds te beheren.`,createFirstButton:`Maak je eerste project`,create:`Maken`,files:`Bestanden`,prints:`Afdrukken`,plates:`platen`,parts:`onderdelen`,lastModified:`Laatst gewijzigd`,deleteConfirm:`Weet je zeker dat je dit project wilt verwijderen? Archieven en wachtrij-items worden ontkoppeld maar niet verwijderd.`,addFiles:`Bestanden toevoegen`,removeFile:`Bestand verwijderen`,viewDetails:`Details bekijken`,namePlaceholder:`bijv. Voron 2.4 Build`,descriptionPlaceholder:`Optionele beschrijving...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URL moet beginnen met http:// of https://`,openExternalUrl:`Project-URL openen`,coverImageLabel:`Omslagfoto`,coverImageAlt:`Projectomslagfoto`,coverImageUpload:`Uploaden`,coverImageReplace:`Vervangen`,coverImageRemove:`Verwijderen`,color:`Kleur`,targetPlates:`Doelaantal platen`,targetPlatesPlaceholder:`bijv. 25`,targetPlatesHelp:`Aantal afdruktaken`,targetParts:`Doelaantal onderdelen`,targetPartsPlaceholder:`bijv. 150`,targetPartsHelp:`Totaal aantal benodigde objecten`,targetSets:`Kopieën per bestand`,targetSetsPlaceholder:`bijv. 10`,targetSetsHelp:`Aantal keren dat elk afdrukbaar bestand moet worden afgedrukt`,tagsLabel:`Tags (door komma's gescheiden)`,tagsPlaceholder:`bijv. voron, functioneel, cadeau`,dueDate:`Einddatum`,priority:`Prioriteit`,priorityLow:`Laag`,priorityNormal:`Normaal`,priorityHigh:`Hoog`,priorityUrgent:`Urgent`,statusActive:`Actief`,statusCompleted:`Voltooid`,statusArchived:`Gearchiveerd`,done:`Klaar`,completed:`voltooid`,failed:`mislukt`,inQueue:`in wachtrij`,noPrintsYet:`Nog geen afdrukken`,printJobs:`Afdruktaken (platen)`,partsPrinted:`Afgedrukte onderdelen`,failedParts:`Mislukte onderdelen`,import:`Importeren`,export:`Exporteren`,importProject:`Project importeren`,exportAll:`Alle projecten exporteren`,loading:`Projecten laden...`,noEditPermission:`Je hebt geen toestemming om projecten te bewerken`,noDeletePermission:`Je hebt geen toestemming om projecten te verwijderen`,noCreatePermission:`Je hebt geen toestemming om projecten te maken`,noImportPermission:`Je hebt geen toestemming om projecten te importeren`,noExportPermission:`Je hebt geen toestemming om projecten te exporteren`,toast:{created:`Project gemaakt`,updated:`Project bijgewerkt`,deleted:`Project verwijderd`,imported:`Project geïmporteerd`,multipleImported:`{{count}} projecten geïmporteerd`,importFailed:`Importeren mislukt`,exported:`Projecten geëxporteerd (alleen metadata)`}},projectDetail:{notFound:`Project niet gevonden`,backToProjects:`Terug naar Projecten`,export:`Exporteren`,exportProject:`Project exporteren`,noExportPermission:`Je hebt geen toestemming om projecten te exporteren`,noEditPermission:`Je hebt geen toestemming om projecten te bewerken`,partOf:`Onderdeel van:`,priorityLabel:`Prioriteit:`,noPrints:`Nog geen afdrukken in dit project`,status:{active:`Actief`,completed:`Voltooid`,archived:`Gearchiveerd`},priority:{low:`Laag`,normal:`Normaal`,high:`Hoog`,urgent:`Urgent`},dueDate:{overdue:`Te laat`,today:`Vandaag te doen`,daysLeft:`{{count}} dagen resterend`},progress:{platesProgress:`Voortgang platen`,partsProgress:`Voortgang onderdelen`,setsProgress:`Volledige sets`,sets:`sets`,setsHint:`Een set is compleet zodra elk afdrukbaar bestand dit aantal heeft bereikt`,printJobs:`afdruktaken`,parts:`onderdelen`,percentComplete:`{{percent}}% voltooid`,remaining:`{{count}} resterend`},stats:{printJobs:`Afdruktaken`,total:`totaal`,failed:`{{count}} mislukt`,partsPrinted:`{{count}} onderdelen afgedrukt`,printTime:`Afdruktijd`,filamentUsed:`Filament gebruikt`},cost:{title:`Kostentracking`,filamentCost:`Filamentkosten`,energy:`Energie`,totalCost:`Geschatte kosten`,total:`Totaal`,includesBom:`incl. materiaallijst`,budget:`Budget`,remaining:`Resterend`},subProjects:{title:`Subprojecten ({{count}})`,jobs:`{{count}} taken`},rollup:{title:`Inclusief {{count}} subprojecten`,progress:`Totale voortgang`,percentComplete:`{{percent}}% voltooid`},notes:{title:`Notities`,noEditPermission:`Je hebt geen toestemming om notities te bewerken`,placeholder:`Voeg notities over dit project toe...`,empty:`Nog geen notities. Klik op Bewerken om notities toe te voegen.`},files:{title:`Bestanden`,linkFolders:`Koppel mappen vanuit Bestandsbeheer`,forQuickAccess:`aan dit project voor snelle toegang.`,fileCount:`{{count}} bestand(en)`,empty:`Geen mappen gekoppeld. Ga naar Bestandsbeheer en koppel een map aan dit project.`,printedCount:`{{count}} keer afgedrukt`,progressTooltip:`{{done}} van {{target}} voltooide afdrukken`,noFiles:`Geen bestanden in deze map.`},bom:{title:`Materiaallijst`,acquired:`{{completed}}/{{total}} aangeschaft`,showAll:`Alles tonen`,hideDone:`Voltooide verbergen`,addPart:`Onderdeel toevoegen`,noAddPermission:`Je hebt geen toestemming om onderdelen toe te voegen`,partNamePlaceholder:`Onderdeelnaam (bijv. M3x8-schroeven)`,partName:`Onderdeelnaam`,qty:`Aantal`,price:`Prijs ({{currency}})`,sourcingUrlPlaceholder:`Inkoop-URL (optioneel)`,remarksPlaceholder:`Opmerkingen (optioneel)`,deletePart:`Onderdeel verwijderen`,deleteConfirm:`Weet je zeker dat je "{{name}}" wilt verwijderen?`,noUpdatePermission:`Je hebt geen toestemming om onderdelen bij te werken`,noEditPermission:`Je hebt geen toestemming om onderdelen te bewerken`,noDeletePermission:`Je hebt geen toestemming om onderdelen te verwijderen`,totalCost:`Totale kosten:`,empty:`Geen onderdelen in de materiaallijst. Voeg hardware, elektronica of andere componenten toe om bij te houden wat nog moet worden ingekocht.`},timeline:{title:`Activiteitentijdlijn`,empty:`Nog geen activiteit.`},template:{saveAsTemplate:`Opslaan als sjabloon`,noCreatePermission:`Je hebt geen toestemming om sjablonen te maken`},queue:{title:`Wachtrij`,viewAll:`Alles bekijken`,printing:`{{count}} bezig met afdrukken`,queued:`{{count}} in wachtrij`},prints:{title:`Afdrukken ({{count}})`},toast:{projectUpdated:`Project bijgewerkt`,partAdded:`Onderdeel toegevoegd`,partRemoved:`Onderdeel verwijderd`,exportFailed:`Export mislukt`,projectExported:`Project geëxporteerd`,templateCreated:`Sjabloon gemaakt`}},system:{title:`Systeeminformatie`,version:`Versie`,uptime:`Uptime`,cpuUsage:`CPU-gebruik`,memoryUsage:`Geheugengebruik`,diskUsage:`Schijfgebruik`,networkInfo:`Netwerkinformatie`,logs:`Logboeken`,debugMode:`Debugmodus`,enableDebug:`Debuglogboekregistratie inschakelen`,disableDebug:`Debuglogboekregistratie uitschakelen`,downloadLogs:`Logboeken downloaden`,clearLogs:`Logboeken wissen`,dockerInfo:`Docker-informatie`,containerName:`Containernaam`,imageName:`Imagenaam`,platform:`Platform`,architecture:`Architectuur`},sponsors:{sectionTitle:`Onafhankelijk en door de community gefinancierd`,tagline:`Bambuddy is gratis en blijft dat omdat mensen ervoor kiezen het te ondersteunen. Geen durfkapitaal, geen cloud-lock-in.`,viewSupporters:`Supporters bekijken`,toastPrints:`Je hebt {{count}} afdrukken voltooid met Bambuddy. Bambuddy blijft gratis dankzij zijn supporters.`,toastCost:`Je hebt {{total}} aan filament bijgehouden met Bambuddy. Bekijk wie het project onafhankelijk houdt.`,toastArchives:`{{count}} afdrukken gearchiveerd met Bambuddy. Bekijk wie het onafhankelijk houdt.`,toastAnniversary:`Eén jaar met Bambuddy! Bekijk wie het project onafhankelijk houdt.`,toastVersionUpdate:`Bijgewerkt naar v{{version}}. Bambuddy blijft gratis dankzij zijn supporters.`,toastBusiness:`Gebruik je Bambuddy met {{count}} printers? Er is een supportplan voor teams — prioriteitsoplossingen, facturering en direct contact met de beheerder.`,businessCta:`Bambuddy voor bedrijven`,businessTitle:`Bambuddy voor bedrijven`,businessTagline:`Je gebruikt {{count}} printers. Prioriteitssupport, commerciële licenties en facturering zijn beschikbaar voor teams en printfarms.`},library:{title:`Filamentbibliotheek`,addFilament:`Filament toevoegen`,editFilament:`Filament bewerken`,deleteFilament:`Filament verwijderen`,vendor:`Leverancier`,material:`Materiaal`,color:`Kleur`,kFactor:`K-factor`,temperature:`Temperatuur`,noFilaments:`Geen filamenten in bibliotheek`,deleteConfirm:`Weet je zeker dat je dit filament wilt verwijderen?`,importFromPrinter:`Importeren vanaf printer`,exportToFile:`Exporteren naar bestand`,runWithPipeline:{actionLabel:`Uitvoeren met pipeline`,noPermission:`Je hebt geen toestemming om pipelines uit te voeren`,modalTitle:`Uitvoeren met pipeline`,confirmTitle:`Run bevestigen`,confirmIntro:`Pre-flight heeft problemen met deze run gevonden`,sourceHint:`Bron`,pipelineHint:`Pipeline`,targetHint:`Doel`,pipelineListAria:`Beschikbare pipelines`,runAnyway:`Toch uitvoeren`,loading:`Laden…`,empty:`Nog geen pipelines opgeslagen. Open het Slice-dialoogvenster en klik op "Opslaan als pipeline" om er een te maken.`,noTarget:`Geen doelprinter ingesteld`,noTargetMessage:`Deze pipeline heeft geen doelprinter ingesteld. Open hem in Instellingen om er een te kiezen.`,copies:`Kopieën`,copiesHint:`max. {{n}}`,classTarget:`Elke {{model}}`,toast:{started:`Pipeline-run gestart`,failed:`Run starten mislukt`},issue:{printerNotSet:`Geen doelprinter ingesteld voor deze pipeline.`,printerNotFound:`Doelprinter bestaat niet meer.`,printerDisabled:`Doelprinter is uitgeschakeld.`,printerOffline:`Doelprinter is offline.`,filamentType:`Filamentsleuf {{slot}}: verwacht {{expected}}, AMS heeft {{actual}}`,filamentColor:`Filamentsleuf {{slot}}: kleur wijkt af (verwacht {{expected}}, AMS heeft {{actual}})`,amsSlotMissing:`AMS-sleuf {{slot}} is niet beschikbaar op deze printer`,filamentUnverified:`Filamentsleuf {{slot}} komt uit een cloud-/standaardpreset en kon niet statisch worden geverifieerd.`,noClassMatches:`Geen printers in deze installatie komen overeen met de doelmodelklasse van de pipeline ({{expected}}).`,classNotSet:`Pipelinedoel is ingesteld op een printerklasse, maar er is geen model gekozen.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Slicerstandaarden weergegeven: je slicer-sidecar is ouder dan deze functie en kan de waarden van een preset niet rapporteren. Werk de sidecar-image bij om ze te zien. Alles wat je niet wijzigt blijft de preset gebruiken.`,presetValuesNotConfigured:`Slicerstandaarden weergegeven: er is geen slicer-sidecar geconfigureerd, dus de waarden van een preset kunnen niet worden gelezen. Alles wat je niet wijzigt blijft de preset gebruiken.`,presetValuesSidecarUnavailable:`Slicerstandaarden weergegeven: de slicer-sidecar antwoordde niet, dus de waarden van een preset kunnen niet worden gelezen. Alles wat je niet wijzigt blijft de preset gebruiken.`,presetValuesUnavailable:`Slicerstandaarden weergegeven: de eigen waarden van de gekozen preset konden niet worden gelezen. Alles wat je niet wijzigt blijft de preset gebruiken.`,filamentDefault:`Standaard`,fromFile:`uit bestand`,fromFileHint:`De ontwerper heeft dit in het bronbestand gewijzigd. De waarde is {{value}}.`,fromFilePrinterCoupled:`printer van ontwerper`,fromFilePrinterCoupledHint:`Afgestemd op de printer waarvoor dit bestand is ontworpen -- kan op jouw printer verkeerd of buiten bereik zijn.`,fromFileOverridesPreset:`overschrijft preset`,fromFileOverridesPresetHint:`Het bestand stelt dit in op {{value}}, terwijl de gekozen preset {{preset}} gebruikt. Vink dit alleen aan als het bestand voorrang moet krijgen.`,useFromFile:`Waarde uit het bronbestand gebruiken voor {{option}}`,otherFromFile:`Andere instellingen uit dit bestand`,fromFileSummary:`De ontwerper heeft {{count}} procesinstellingen in dit bestand gewijzigd. Alleen de instellingen die je aanvinkt worden gebruikt.`,fromFileUseAll:`Instellingen van de ontwerper gebruiken`,fromFileUseAllHint:`Vinkt de instellingen aan die tussen printers overdraagbaar zijn. Instellingen die zijn afgestemd op de eigen printer van de ontwerper en instellingen die de gekozen preset definiëren blijven uitgeschakeld.`,fromFileClear:`{{count}} wissen`,loading:`Slicerinstellingen laden…`,mode:{simple:`Eenvoudig`,advanced:`Geavanceerd`,expert:`Expert`},searchPlaceholder:`Instellingen zoeken`,resetAll:`{{count}} resetten`,resetOption:`Terugzetten naar standaard`,noMatches:`Geen instellingen komen overeen met deze zoekopdracht.`},slice:{filamentSlotUnset:`niet ingesteld`,processSettingsEmbedded:`Niet gebruikt zolang "Ingebouwde instellingen van het bestand gebruiken" is ingeschakeld -- de eigen instellingen van het bestand sturen deze slice aan.`,processSettingsInactive:`Inactief`,presetsHidden:`{{count}} verborgen`,showAllPresets:`Alles tonen`,showFewerPresets:`Minder tonen`,processSettings:`Procesinstellingen`,processSettingsHint:`Pas de gekozen preset aan voor deze slice. Alles wat je niet aanraakt blijft zoals de preset het definieert.`,processSettingsChanged:`{{count}} gewijzigd`,processSettingsUnchanged:`Presetstandaarden`,title:`Model slicen`,action:`Slicen`,actionAll:`Alle {{count}} platen slicen`,actionAllTitle:`Slice elke plaat naar één uitvoer met meerdere platen (één archief). Filamentselectie omvat elke sleuf die het project definieert.`,allPlatesToggle:`Alle {{count}} platen slicen`,slicing:`Slicen…`,printer:`Printerprofiel`,process:`Procesprofiel`,filament:`Filamentprofiel`,filamentSlot:`Filament {{index}} ({{type}})`,filamentColour:`Filamentkleur`,selectPreset:`— Selecteer een preset —`,loadingPresets:`Presets laden…`,analyzingPlateFilaments:`Filamenten op plaat analyseren…`,analyzingPlateFilamentsHint:`Een voorbeeldslice uitvoeren om te ontdekken welke AMS-sleuven deze plaat gebruikt. Daarna gecachet — opnieuw openen is direct.`,previewToast:`{{name}} analyseren — {{elapsed}}`,previewWithProgress:`{{name}} analyseren — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— niet gebruikt door deze plaat`,noPresetsForSlot:`Geen presets beschikbaar`,otherPrinters:`Andere printers`,presetsLoadFailed:`Presets laden mislukt. Open eerst Instellingen → Profielen om ze te importeren.`,refreshPresets:`Vernieuwen`,refreshPresetsTitle:`Presets vernieuwen — haal de nieuwste cloud- en meegeleverde lijsten op (gebruik na het verwijderen van een preset in Bambu Studio of Bambu Handy)`,allPresetsRequired:`Alle presets moeten worden geselecteerd`,useEmbedded:`Ingebouwde instellingen van het bestand gebruiken`,useEmbeddedHint:`Slice zoals de ontwerper het heeft ingesteld (wanden, infill, filament) in plaats van met bovenstaande profielen. Beschikbaar omdat je printer overeenkomt met die van het bestand.`,autoOrient:`Objecten automatisch oriënteren`,autoOrientHint:`Laat de slicer elk object eerst naar de beste afdrukzijde draaien. Overschrijft de oriëntatie uit het bestand.`,autoArrange:`Automatisch op de plaat rangschikken`,autoArrangeHint:`Laat de slicer de objecten positioneren zodat ze niet meer overlappen. Vervangt de indeling uit het bestand.`,enqueuing:`Slicetaak indienen…`,queued:`In wachtrij…`,failed:`Slicen mislukt. Controleer de logboeken van de slicer-sidecar.`,startedToast:`{{name}} op de achtergrond slicen…`,queuedToast:`In wachtrij: {{name}} — {{elapsed}}`,runningToast:`{{name}} slicen — {{elapsed}}`,runningWithProgress:`{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,runningWithProgressMultiPlate:`Plaat {{plateIndex}} van {{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,completedToast:`{{name}} gesliced`,externalWriteFallbackToast:`Opgeslagen in de interne bibliotheek: er kon niet naar de externe map worden geschreven`,failedTitle:`Slicen mislukt`,failedToast:`Slicen van {{name}} mislukt: {{detail}}`,tier:{local:`Geïmporteerd`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Standaard`},cloud:{notAuthenticated:`Log in op Bambu Cloud (Instellingen → Profielen → Bambu Cloud) om je cloudpresets te zien.`,expired:`Bambu Cloud-sessie verlopen — log opnieuw in om je cloudpresets te vernieuwen.`,unreachable:`Bambu Cloud is momenteel niet bereikbaar. Lokale en standaardpresets blijven werken.`},orcaCloud:{notAuthenticated:`Log in op Orca Cloud (Profielen → Orca Cloud) om je Orca-presets te zien.`,expired:`Orca Cloud-sessie verlopen — log opnieuw in om je Orca-presets te vernieuwen.`,unreachable:`Orca Cloud is momenteel niet bereikbaar. Andere presets blijven werken.`},bedType:{label:`Bouwplaat`,auto:`Auto (procespreset gebruiken)`,coolPlate:`Cool Plate`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`},pipelines:{label:`Pipeline`,applyAria:`Pipeline toepassen`,applyPrompt:`Pipeline toepassen…`,empty:`Geen opgeslagen pipelines`,saveButton:`Opslaan als pipeline`,saveTitle:`Sla de huidige selectie van vier sleuven op als herbruikbare pipeline`,namePlaceholder:`Pipelinenaam`,nameAria:`Nieuwe pipelinenaam`,toast:{applied:`"{{name}}" toegepast`,saved:`Pipeline opgeslagen`,saveFailed:`Opslaan mislukt`}}},spoolman:{title:`Spoolman-integratie`,enabled:`Spoolman ingeschakeld`,url:`Spoolman-URL`,connected:`Verbonden`,disconnected:`Niet verbonden`,testConnection:`Verbinding testen`,sync:`Synchroniseren`,syncing:`Synchroniseren...`,lastSync:`Laatste synchronisatie`,linkToSpoolman:`Koppelen aan Spoolman`,openInSpoolman:`Openen in Spoolman`,unlinkSpool:`Spoel ontkoppelen`,unlinkConfirmTitle:`Spoeltoewijzing verwijderen?`,unlinkConfirmMessage:`Hiermee wordt de spoel uit deze sleuf verwijderd. De spoelgegevens zelf blijven ongewijzigd.`,selectSpool:`Spoel selecteren`,noUnlinkedSpools:`Geen niet-toegewezen spoelen beschikbaar`,linkSuccess:`Spoel succesvol toegewezen`,linkFailed:`Spoel toewijzen mislukt`,unlinkSuccess:`Spoeltoewijzing succesvol verwijderd`,unlinkFailed:`Spoeltoewijzing verwijderen mislukt`,linkedSpool:`Toegewezen spoel`,spoolId:`Spoel-ID`,fillSourceLabel:`(Spoolman)`,weight:`Gewicht`,remaining:`Resterend`,disableWeightSync:`Synchronisatie van geschat AMS-gewicht uitschakelen`,disableWeightSyncDesc:`Werk de resterende capaciteit niet bij op basis van AMS-schattingen. Gebruik dit als je de verbruikstracking van Spoolman verkiest boven AMS-schattingen op basis van percentages. Nieuwe spoelen gebruiken nog steeds de AMS-schatting als startgewicht.`,reportPartialUsage:`Gedeeltelijk verbruik rapporteren voor mislukte afdrukken`,reportPartialUsageDesc:`Wanneer een afdruk mislukt of wordt geannuleerd, rapporteer dan het geschatte filamentverbruik tot dat moment op basis van de laagvoortgang.`},locations:{title:`Opslaglocaties`,subtitle:`Beheer planken, laden en andere fysieke opslagplekken voor je spoelen`,add:`Locatie toevoegen`,addShort:`Toevoegen`,edit:`Locatie bewerken`,name:`Naam`,spools:`Spoelen`,sensors:`Sensoren`,empty:`Nog geen opslaglocaties. Maak je eerste plank of lade.`,manage:`Locaties`,createPlaceholder:`bijv. Plank A, Lade 1`,nameRequired:`Locatienaam is verplicht`,created:`Locatie gemaakt`,updated:`Locatie bijgewerkt`,deleted:`Locatie verwijderd`,saveFailed:`Locatie opslaan mislukt`,deleteFailed:`Locatie verwijderen mislukt`,deleteBlocked:`Verwijder alle spoelen uit deze locatie voordat je deze verwijdert`,confirmDelete:`"{{name}}" verwijderen?`,confirmDeleteMessage:`Deze locatie wordt uit de catalogus verwijderd. Spoelen moeten eerst worden verplaatst.`,confirmDeleteMessageWithSensors:`Deze locatie wordt uit de catalogus verwijderd. Spoelen moeten eerst worden verplaatst. Gekoppelde sensoren worden ook verwijderd.`},inventory:{title:`Spoelvoorraad`,subtitle:`Beheer je spoelen`,addToInventory:`Aan voorraad toevoegen`,addToInventoryPending:`Toevoegen...`,addToInventorySuccess:`Spoel aan voorraad toegevoegd`,addToInventoryFailed:`Spoel aan voorraad toevoegen mislukt`,unknownSpoolTitle:`Nieuw filament gedetecteerd`,unknownSpoolMessage:`Een spoel met een onbekende RFID-tag is gedetecteerd bij {{location}}. Nu aan je voorraad toevoegen?`,unknownSpoolSlot:`Sleuf`,bulk:{selectAllVisible:`Alle zichtbare selecteren`,selectRow:`Rij selecteren`,selectGroup:`Groep selecteren`,selectionCount:`{{count}} geselecteerd`,edit:`Bewerken`,printLabels:`Labels afdrukken`,resetUsage:`Verbruik resetten`,restore:`Herstellen`,archive:`Archief`,delete:`Verwijderen`,clearSelection:`Selectie wissen`,editTitle:`Spoelen in bulk bewerken`,editSubtitle:`Van toepassing op {{count}} geselecteerde spoelen. Alleen velden die je aanvinkt worden bijgewerkt.`,editHint:`Typ in een veld om het voor bijwerken te markeren — alleen aangevinkte rijen worden verzonden. Een leeg veld laat de spoelen ongewijzigd (velden wissen kan alleen per spoel).`,useCustom:`"{{value}}" gebruiken`,toggleField:`Bijwerken voor dit veld omschakelen`,changeCount:`{{count}} velden worden bijgewerkt.`,applyPending:`Toepassen...`,applyButton:`Toepassen op {{count}} spoelen`,deleteTitle:`Geselecteerde spoelen verwijderen`,archiveTitle:`Geselecteerde spoelen archiveren`,restoreTitle:`Geselecteerde spoelen herstellen`,resetUsageTitle:`Verbruik van geselecteerde spoelen resetten`,deleteMessage:`{{count}} spoelen permanent verwijderen? Dit kan niet ongedaan worden gemaakt.`,archiveMessage:`{{count}} spoelen archiveren? Ze kunnen later worden hersteld.`,restoreMessage:`{{count}} gearchiveerde spoelen herstellen?`,resetUsageMessage:`De teller "Totaal verbruikt" op {{count}} spoelen resetten? Resterend gewicht blijft behouden.`,updateSuccess:`{{count}} spoelen bijgewerkt`,updateFailed:`Bulkupdate mislukt`,updatePartial:`{{ok}} spoelen bijgewerkt, {{failed}} mislukt`,updateAllFailed:`Alle {{count}} spoelupdates zijn mislukt — selectie blijft behouden zodat je opnieuw kunt proberen`,deleteSuccess:`{{count}} spoelen verwijderd`,deleteFailed:`Bulkverwijdering mislukt`,deletePartial:`{{ok}} spoelen verwijderd, {{failed}} mislukt`,deleteAllFailed:`Alle {{count}} spoelverwijderingen zijn mislukt — selectie blijft behouden zodat je opnieuw kunt proberen`,archiveSuccess:`{{count}} spoelen gearchiveerd`,archiveFailed:`Bulkarchivering mislukt`,archivePartial:`{{ok}} spoelen gearchiveerd, {{failed}} mislukt`,archiveAllFailed:`Alle {{count}} spoelarchiveringen zijn mislukt — selectie blijft behouden zodat je opnieuw kunt proberen`,restoreSuccess:`{{count}} spoelen hersteld`,restoreFailed:`Bulkherstel mislukt`,restorePartial:`{{ok}} spoelen hersteld, {{failed}} mislukt`,restoreAllFailed:`Alle {{count}} spoelherstelacties zijn mislukt — selectie blijft behouden zodat je opnieuw kunt proberen`,invalidHex:`Voer 6 hextekens (RRGGBB) of 8 (RRGGBBAA) in. Anders wordt het veld niet toegepast.`},spoolmanMixedContentTitle:`Spoolman kan niet via HTTPS laden — mixed content wordt door je browser geblokkeerd`,spoolmanMixedContentBody:`Bambuddy wordt via HTTPS aangeboden (via je reverse proxy), maar je Spoolman-URL gebruikt nog gewone HTTP. Browsers blokkeren mixed content om veiligheidsredenen, waardoor de ingebedde Spoolman-interface niet kan worden weergegeven. Spoolman moet via HTTPS bereikbaar zijn om dit te laten werken.`,spoolmanMixedContentFixReverseProxy:`Plaats Spoolman achter dezelfde reverse proxy als Bambuddy (Traefik / Nginx / Caddy) met HTTPS en werk daarna de Spoolman-URL in Instellingen bij naar het nieuwe HTTPS-adres.`,spoolmanMixedContentFixOpenNewTab:`Als tijdelijke oplossing kun je Spoolman in een nieuw browsertabblad via HTTP openen — mixed-contentregels gelden alleen voor ingebedde frames, dus een zelfstandig tabblad werkt wel.`,spoolmanOpenInNewTab:`Spoolman in nieuw tabblad openen`,labels:{title:`Spoellabels afdrukken`,selectedCount:`{{count}} geselecteerd`,pickSpools:`Kies voor welke spoelen je labels wilt afdrukken:`,monochrome:`Monochroom (zwart-witprinter)`,monochromeHint:`Verwijdert het kleurvlak en maakt de tekst breder`,startingPosition:`Startpositie van etiket`,startingPositionRange:`Alleen vellensjablonen: L7160 ondersteunt 1–21; 5160 ondersteunt 1–30.`,startingPositionInvalid:`Voer een heel getal van 1 tot {{capacity}} in.`,startingPositionFirst:`Het afdrukken begint op positie 1.`,startingPositionSkipped:`Posities 1 tot en met {{lastPosition}} blijven leeg op het eerste vel.`,startingPositionRangeError:`De startpositie moet voor dit vel tussen 1 en {{capacity}} liggen.`,searchPlaceholder:`Zoek op naam, merk of #ID`,filterByMaterial:`Materiaal:`,allMaterials:`Alle`,selectVisible:`Alle zichtbare selecteren ({{count}})`,deselectVisible:`Zichtbare deselecteren`,clearAll:`Alles wissen`,noSpoolsToShow:`Geen spoelen om te tonen. Pas je filter aan en probeer opnieuw.`,noMatches:`Geen spoelen komen overeen met de huidige zoekopdracht of het filter.`,printOne:`Label voor deze spoel afdrukken`,printLabels:`Labels afdrukken…`,bulkTitle:`Kies spoelen voor labels uit de {{count}} die momenteel worden weergegeven`,noSpoolsTitle:`Geen spoelen om te labelen`,error:`Labels genereren mislukt: {{msg}}`,sortBy:{label:`Sorteren:`,id:`Op ID`,color:`Op kleur`},templates:{amsHolderSmall:{label:`AMS-houder — klein (74 × 33 mm)`,hint:`Eén label per pagina; past bij het printbare label van MakerWorld-model 752566 (AMS Filament Label Holder).`},amsHolderLarge:{label:`AMS-houder — groot (75 × 55 mm)`,hint:`Eén label per pagina; past bij de kartonnen insteekvariant van de AMS Filament Label Holder. Ruim genoeg voor kleurvlak, merk, materiaal, ID en QR-code.`},box40x30:{label:`Dooslabel (40 × 30 mm)`,hint:`Eén label per pagina; veelgebruikt DK/Brother-rolformaat, geschikt voor filamentzakken en opslagbakken.`},box:{label:`Dooslabel (62 × 29 mm)`,hint:`Eén label per pagina; formaat voor kleine labels van Brother PT/QL en Dymo.`},averyL7160:{label:`Avery L7160 — A4-vel (38,1 × 63,5 mm × 21)`,hint:`EU-vellen; 21 labels per A4-pagina.`},avery5160:{label:`Avery 5160 — US Letter-vel (25,4 × 66,7 mm × 30)`,hint:`Amerikaanse vellen; 30 labels per Letter-pagina.`}}},csv:{importButton:`CSV importeren`,exportButton:`CSV exporteren`,modalTitle:`Spoelen importeren uit CSV`,selectFile:`Kies een CSV-bestand of sleep het hierheen`,dragHint:`Koptekst: material (verplicht), brand, subtype, color_name, rgba, …`,parsing:`Bestand lezen…`,previewError:`CSV-bestand kon niet worden gelezen`,validCount:`{{count}} geldig`,errorCount:`{{count}} fout`,skippedCount:`{{count}} overgeslagen`,colRow:`Rij`,colStatus:`Status`,colColor:`Kleur`,colorResolved:`Kleur ingevuld vanuit catalogus`,colorCrossMaterial:`Kleur overgenomen van ander materiaal — geen exacte overeenkomst in catalogus`,duplicateExisting:`Er bestaat al een spoel met dit materiaal, merk en deze kleur — deze wordt toch als nieuwe spoel geïmporteerd`,spoolmanHint:`Gebruik in Spoolman-modus de ingebouwde CSV-import/-export van Spoolman.`,importValidRows:`{{count}} geldige rijen importeren`,noValidRows:`Geen geldige rijen`,importing:`Importeren…`,importSuccess:`{{count}} spoelen geïmporteerd`,importError:`Importeren mislukt`,exportError:`Export mislukt`},addSpool:`Spoel toevoegen`,editSpool:`Spoel bewerken`,copySpool:`Spoel kopiëren`,material:`Materiaal`,selectMaterial:`Materiaal selecteren...`,subtype:`Subtype`,brand:`Merk`,searchBrand:`Merk zoeken...`,useCustomBrand:`"{{brand}}" gebruiken`,useCustomMaterial:`Aangepast materiaal gebruiken: {{material}}`,suggestedOptions:`Voorgesteld`,allOptions:`Alle`,colorName:`Kleurnaam`,colorNamePlaceholder:`Jade White, Fire Red...`,color:`Kleur`,hexColor:`Hexkleur`,pickColor:`Aangepaste kleur kiezen`,labelWeight:`Labelgewicht`,coreWeight:`Leeg spoelgewicht`,searchSpoolWeight:`Spoelgewicht zoeken...`,weightUsed:`Gebruikt`,currentWeight:`Resterend gewicht`,measuredWeight:`Gemeten gewicht`,spoolName:`Spoel`,costPerKg:`Kosten per kg`,storageLocation:`Opslaglocatie`,temperature:`Temperatuur`,humidity:`Luchtvochtigheid`,battery:`Batterij`,storageLocationPlaceholder:`bijv. Plank A, Lade 1`,openInInventory:`Openen in Voorraad`,measuredWeightError:`Gemeten gewicht moet tussen {{min}}g en {{max}}g liggen.`,slicerFilament:`Slicerfilament`,slicerFilamentName:`Naam slicerpreset`,slicerPreset:`Slicer-preset`,searchPresets:`Filamentpresets zoeken...`,selectedPreset:`Geselecteerd`,noPresetsFound:`Geen presets gevonden`,tempOverrides:`Temperatuuroverschrijvingen`,note:`Notitie`,notePlaceholder:`Eventuele extra notities over deze spoel...`,category:`Categorie`,categoryPlaceholder:`bijv. Productie, Prototype, Klant A`,categoryNone:`Niet gecategoriseerd`,storageLocationNone:`Geen locatie ingesteld`,lowStockThresholdOverride:`Drempel lage voorraad (deze spoel)`,lowStockThresholdOverrideHelp:`Laat leeg om de globale drempel ({{global}}%) te gebruiken.`,clearRfid:`RFID-tag wissen`,rfidCleared:`RFID-tag gewist`,archive:`Archief`,restore:`Herstellen`,noSpools:`Nog geen spoelen. Voeg je eerste spoel toe om te beginnen.`,noAvailableSpools:`Geen spoelen beschikbaar. Voeg eerst een spoel toe aan je voorraad of maak de toewijzing van een andere sleuf ongedaan.`,kProfiles:`K-profielen`,addKProfile:`K-profiel toevoegen`,assignSpool:`Spoel toewijzen`,unassignSpool:`Toewijzing opheffen`,assignSuccess:`Spoel toegewezen en AMS-sleuf geconfigureerd`,assignPendingInsert:`Toegewezen. Sleuf wordt geconfigureerd zodra je de spoel plaatst.`,assignFailed:`Spoel toewijzen mislukt`,selectSpool:`Selecteer een spoel om aan deze sleuf toe te wijzen`,assigned:`Toegewezen`,assigning:`Toewijzen...`,searchSpools:`Spoelen zoeken...`,showAllSpools:`Alle spoelen tonen`,spoolmanSpools:`Spoolman-spoelen`,allMaterials:`Alle materialen`,filterByBrand:`Filteren op merk...`,showArchived:`Gearchiveerde tonen`,quickAdd:`Snel toevoegen (voorraad)`,quantity:`Aantal`,stock:`Voorraad`,configured:`Geconfigureerd`,spoolsCreated:`{{count}} spoelen gemaakt`,spoolsPartiallyCreated:`{{created}} van {{total}} spoelen gemaakt (sommige mislukt)`,spoolCreated:`Spoel gemaakt`,spoolUpdated:`Spoel bijgewerkt`,spoolDeleted:`Spoel verwijderd`,deepLinkSpoolNotFound:`Spoel niet gevonden`,deepLinkFetchFailed:`Spoel kon niet worden geladen — probeer opnieuw`,spoolArchived:`Spoel gearchiveerd`,spoolRestored:`Spoel hersteld`,kProfileSaveFailed:`K-profielinstellingen konden niet worden opgeslagen`,syncWeightSpoolNotFound:`Spoel niet gevonden — mogelijk verwijderd`,syncWeightSpoolmanUnreachable:`Spoolman is niet bereikbaar — probeer het later opnieuw`,syncWeightFailed:`Gewicht synchroniseren mislukt`,spoolmanUnreachable:`Spoolman is niet bereikbaar — probeer het later opnieuw`,deleteSpoolNotFound:`Spoel niet gevonden — mogelijk al verwijderd`,deleteFailed:`Spoel verwijderen mislukt`,archiveSpoolNotFound:`Spoel niet gevonden — mogelijk al verwijderd`,archiveFailed:`Spoel archiveren mislukt`,restoreSpoolNotFound:`Spoel niet gevonden — mogelijk al verwijderd`,restoreFailed:`Spoel herstellen mislukt`,saveFailed:`Wijzigingen opslaan mislukt`,tagClearFailed:`Tag wissen mislukt`,deleteConfirm:`Weet je zeker dat je deze spoel wilt verwijderen? Dit kan niet ongedaan worden gemaakt.`,archiveConfirm:`Weet je zeker dat je deze spoel wilt archiveren?`,advancedSettings:`Geavanceerde instellingen`,filamentInfoTab:`Filamentinformatie`,paProfileTab:`PA-profiel`,colorAndCostTab:`Kleur & kosten`,printersTab:`Printers`,filamentInfo:`Filament`,additional:`Aanvullend`,loadingPresets:`Cloudpresets laden...`,cloudConnected:`Cloud verbonden`,cloudNotConnected:`Cloud niet verbonden (standaardwaarden worden gebruikt)`,recentColors:`Recent`,searchColors:`Kleuren zoeken...`,searchResults:`Zoekresultaten`,allColors:`Alle kleuren`,commonColors:`Veelgebruikte kleuren`,showLess:`Minder tonen`,showAll:`Alles tonen`,noColorsFound:`Geen kleuren komen overeen met je zoekopdracht`,noResults:`Geen overeenkomsten gevonden`,extraColorsLabel:`Extra kleuren`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Plak 2 tot 8 hexwaarden, gescheiden door komma's. Wordt als verloop weergegeven.`,extraColorsInvalid:`Ongeldige hex genegeerd: {{tokens}}`,colorEffectLabel:`Effect`,colorEffect:{none:`Geen`,sparkle:`Sprankelend`,wood:`Hout`,marble:`Marmer`,glow:`Gloed`,matte:`Mat`,silk:`Zijde`,galaxy:`Galaxy`,rainbow:`Regenboog`,metal:`Metaal`,translucent:`Transparant`,gradient:`Verloop`,dualColor:`Tweekleurig`,triColor:`Driekleurig`,multicolor:`Meerkleurig`},selectMaterialFirst:`Selecteer eerst een materiaal op het tabblad Filamentinformatie.`,noPrintersConfigured:`Geen printers geconfigureerd. Voeg printers toe om PA-profielen te gebruiken.`,matchingFilter:`Overeenkomend`,anyBrand:`Elk merk`,anyVariant:`Elke variant`,autoSelect:`Automatisch selecteren`,matches:`overeenkomsten`,match:`overeenkomst`,noMatches:`Geen overeenkomsten`,connected:`Verbonden`,offline:`Offline`,printerOffline:`Printer is offline. Maak verbinding om kalibratieprofielen te bekijken.`,noKProfilesMatch:`Geen K-profielen komen overeen met het geselecteerde filament.`,leftNozzle:`Linker nozzle`,rightNozzle:`Rechter nozzle`,profilesSelected:`kalibratieprofiel(en) geselecteerd`,filamentPreset:`Filamentvoorinstelling`,presetUseSpoolDefault:`Voorinstelling van de spoel gebruiken`,presetInherited:`overgenomen`,presetOverride:`aangepast`,presetNeedsModel:`Deze printer heeft zijn model nog niet doorgegeven en kan dus geen eigen voorinstelling hebben.`,autoMatchPresets:`Automatisch koppelen`,autoMatchPresetsHint:`Zoek de variant van de spoelvoorinstelling die elk model noemt`,kProfilesPerPrinter:`K-profielen`,kProfileNotSet:`Niet ingesteld`,kProfileFlowMismatch:`Dit profiel is gemeten met een {{profile}}-nozzle, maar er is een {{fitted}}-nozzle gemonteerd; het wordt dus niet toegepast`,nozzle:`Nozzle`,unknownModel:`Onbekend model`,onePrinter:`1 printer`,nPrinters:`{{n}} printers`,filamentPresetsLoadFailed:`De voorinstellingen per model van deze spoel konden niet worden geladen`,filamentPresetSaveFailed:`De voorinstellingen per model konden niet worden opgeslagen`,totalInventory:`Totale voorraad`,totalConsumed:`Totaal verbruikt`,byMaterial:`Per materiaal`,inPrinter:`In printer`,lowStock:`Lage voorraad`,sinceTracking:`Sinds tracking is gestart`,resetConsumedCounter:`Teller resetten`,resetConsumedCounterTooltip:`Zet de teller voor verbruikte grammen van deze spoel op nul. Resterend gewicht verandert niet.`,resetConsumedCounterConfirm:`Teller voor verbruikte grammen van deze spoel resetten naar 0? Toekomstige afdrukken tellen dan weer vanaf nul. De spoel zelf, de berekening van resterend gewicht en je instellingen veranderen niet.`,resetAllConsumedCounters:`Alle tellers resetten`,resetAllConsumedCountersTooltip:`Zet de teller voor verbruikte grammen op elke spoel op nul. Resterende gewichten veranderen niet.`,resetAllConsumedCountersConfirm:`De teller voor verbruikte grammen op alle {{count}} spoelen (inclusief gearchiveerde) resetten naar 0? Hiermee wordt de statistiek "Totaal verbruikt" gewist zodat toekomstige afdrukken weer vanaf nul tellen. Spoelen en resterende gewichten veranderen niet.`,consumedCounterReset:`Teller gereset`,allConsumedCountersReset:`Teller gereset voor {{count}} spoel(en)`,resetConsumedCounterFailed:`Teller resetten mislukt`,loadedInAms:`Geladen in AMS/Ext`,remaining:`Resterend`,weightCheck:`Gewichtscontrole`,lastWeighed:`Laatst gewogen`,neverWeighed:`Nooit gewogen`,search:`Spoelen zoeken...`,showing:`Weergegeven`,to:`tot`,of:`van`,show:`Tonen`,spools:`spoelen`,spool:`spoel`,page:`Pagina`,noSpoolsMatch:`Geen resultaten gevonden`,noSpoolsMatchDesc:`Pas je zoekopdracht of filters aan om te vinden wat je zoekt.`,active:`Actief`,archived:`Gearchiveerd`,all:`Alle`,used:`Gebruikt`,new:`Nieuw`,clearFilters:`Filters wissen`,table:`Tabel`,cards:`Kaarten`,net:`Netto`,groupSimilar:`Groeperen`,groupedSpools:`{{count}} identieke spoelen`,groupedRows:`rijen`,columns:`Kolommen`,configureColumns:`Kolommen configureren`,configureColumnsDesc:`Sleep om kolommen te herschikken of gebruik de pijlen. Schakel zichtbaarheid met het oogpictogram.`,visible:`zichtbaar`,reset:`Resetten`,cancel:`Annuleren`,applyChanges:`Wijzigingen toepassen`,moveUp:`Omhoog verplaatsen`,moveDown:`Omlaag verplaatsen`,hideColumn:`Kolom verbergen`,showColumn:`Kolom tonen`,linkToSpool:`Koppelen aan spoel`,tagLinked:`Tag aan spoel gekoppeld`,tagLinkFailed:`Tag koppelen mislukt`,tagAlreadyLinked:`Tag is al aan spoel #{{id}} gekoppeld`,unknownTag:`Onbekende RFID-tag gedetecteerd`,usageHistory:`Verbruiksgeschiedenis`,noUsageHistory:`Nog geen verbruik geregistreerd`,printName:`Afdruknaam`,weightConsumed:`Verbruikt gewicht`,clearHistory:`Wissen`,historyCleared:`Verbruiksgeschiedenis gewist`,fillSourceLabel:`(Voorraad)`,lowStockThresholdError:`Drempel moet tussen 0,1 en 99,9 liggen`,assignMismatchTitle:`Materiaal komt niet overeen`,assignMismatchMessage:`Het materiaal van de geselecteerde spoel "{{spoolMaterial}}" komt niet overeen met het materiaal van de tray "{{trayMaterial}}" voor {{location}}. Toch toewijzen?`,assignMismatchConfirm:`Toch toewijzen`,assignPartialMismatchMessage:`Het spoelmateriaal "{{spoolMaterial}}" lijkt op maar komt niet exact overeen met "{{trayMaterial}}" in {{location}}. Wil je doorgaan?`,assignProfileMismatchMessage:`Het spoelprofiel "{{spoolProfile}}" komt niet overeen met het trayprofiel "{{trayProfile}}" in {{location}}. Wil je doorgaan?`,assignReconfigureNote:`De AMS-sleuf wordt opnieuw geconfigureerd om het profiel van de spoel te gebruiken.`,spoolmanFilamentCatalog:`Spoolman-filamentcatalogus`,pickFromSpoolmanCatalog:`Kies uit Spoolman-catalogus…`,spoolmanFilamentSelected:`Filament geselecteerd uit Spoolman-catalogus`,spoolmanFilamentUnlinked:`Koppeling met filamentcatalogus gewist`,noSpoolmanFilaments:`Geen filamenten gevonden in Spoolman-catalogus`,spoolmanFilamentColorSwatch:`Filamentkleur`,spoolWeightManagedBySpoolman:`Leeg spoelgewicht wordt per filamenttype beheerd in Spoolman`,spoolmanCatalogLoadFailed:`Spoolman-filamentcatalogus laden mislukt`},timelapse:{title:`Timelapse`,create:`Timelapse maken`,download:`Downloaden`,delete:`Verwijderen`,preview:`Voorbeeld`,frameRate:`Framesnelheid`,quality:`Kwaliteit`,processing:`Verwerken...`,noTimelapses:`Geen timelapses beschikbaar`},ams:{title:`AMS`,slot:`Sleuf`,empty:`Leeg`,emptySlot:`Lege sleuf`,slotEmpty:`Leeg`,slotUnconfigured:`?`,emptySlotReset:`Geen filament toegewezen`,unknown:`Onbekend`,humidity:`Luchtvochtigheid`,temperature:`Temperatuur`,filamentType:`Filamenttype`,filamentColor:`Kleur`,remaining:`Resterend`,history:`AMS-geschiedenis`,noHistory:`Geen geschiedenis beschikbaar`,configureSlot:`Sleuf configureren`,externalSpool:`Externe spoel`,profile:`Profiel`,kFactor:`K-factor`,kFactorShort:`K`,fill:`Vullen`,configure:`Configureren`,used:`gebruikt`,remainingUnit:`resterend`},printModal:{variants:{editNote:`Deze alternatieven zijn ingesteld toen de taak in de wachtrij werd geplaatst. Annuleer en plaats opnieuw in de wachtrij om ze te wijzigen.`,title:`Printeralternatieven`,help:`Eén taak, één wachtrijpositie. De eerste passende printer die vrijkomt voert zijn bestand uit.`,unknownModel:`Onbekend model`,plateFor:`Plaat voor {{filename}}`,moveUp:`Omhoog verplaatsen`,moveDown:`Omlaag verplaatsen`,queued:`In wachtrij met {{count}} alternatieven`},selectPrinter:`Printer selecteren`,selectPlate:`Plaat selecteren`,filamentMapping:`Filamenttoewijzing`,useArchiveMapping:`Toewijzing`,useArchiveMappingTooltip:`Selecteer elke sleuf uit de AMS-toewijzing die met dit archief is opgeslagen (vanuit de slicer), in plaats van te matchen op type/kleur.`,clickToChangeSlot:`Klik om sleuftoewijzing te wijzigen`,reRead:`Opnieuw uitlezen`,plateN:`Plaat {{n}}`,plateFilamentsUnreadable:`De filamenten van een geselecteerde plaat konden niet worden gelezen en kunnen daarom niet worden toegewezen. Deselecteer deze plaat om de andere in de wachtrij te plaatsen.`,totalCost:`Totale kosten:`,slotRemainingShort:` - {{grams}}g resterend`,printSettings:`Afdrukinstellingen`,bedLeveling:`Bednivellering`,flowCalibration:`Flowkalibratie`,vibrationCalibration:`Trillingskalibratie`,layerInspection:`Inspectie eerste laag`,timelapse:`Timelapse`,cancel:`Annuleren`,noPrintersAvailable:`Geen printers beschikbaar`,printerBusy:`Printer is bezig`,printerOffline:`Printer is offline`,sameTypeDifferentColor:`Zelfde type, andere kleur`,filamentTypeNotLoaded:`Filamenttype niet geladen`,statusReady:`Gereed`,statusColorMismatch:`Kleur komt niet overeen`,statusTypeNotFound:`Type niet gevonden`,requiredTooltip:`Vereist: {{name}} - {{color}}`,manuallySelected:`Handmatig geselecteerd`,autoMatched:`Automatisch gekoppeld`,selectSlot:`Sleuf selecteren`,sameTypeDifferentColorDetail:`Zelfde type, andere kleur: vereist {{required}}, sleuf bevat {{loaded}}`,requiredTypeNotInPrinter:`Vereist filamenttype niet gevonden in printer.`,whenToPrint:`Wanneer afdrukken`,asap:`Zo snel mogelijk`,queue:`Wachtrij`,schedule:`Plannen`,dateTime:`Datum en tijd`,invalidDateTime:`Voer een geldige datum en tijd in`,openCalendar:`Kalender openen`,requireManualStart:`Handmatige start vereisen`,requirePreviousSuccess:`Alleen starten als vorige afdruk is geslaagd`,autoOffAfter:`Printer uitschakelen wanneer klaar`,helpAsap:`Afdruk wordt bovenaan de wachtrij geplaatst en start zodra een geschikte printer inactief is.`,helpSchedule:`Afdruk start op het geplande tijdstip als de printer inactief is. Als deze bezig is, wacht de taak tot de printer beschikbaar is.`,helpQueue:`Afdruk wordt achteraan de wachtrij geplaatst.`,leftNozzle:`L`,rightNozzle:`R`,leftNozzleTooltip:`Linker nozzle`,rightNozzleTooltip:`Rechter nozzle`,ftsSameInletHint:`Alle filamenten voor deze afdruk zitten op Filament Track Switch IN-{{inlet}}. Wisselen tussen filamenten op dezelfde ingang is langzamer — verplaats er één naar een AMS op de andere ingang om dit te versnellen.`,rackPosition:`Rekpositie`,rackPositionTooltip:`Welke nozzle op het rek dit filament afdrukt. Posities zijn genummerd zoals op de printer.`,rackEmptyPosition:`Deze rekpositie is leeg`,rackWrongNozzle:`Bevat een {{has}}-nozzle; dit filament vereist {{needs}}`,filamentOverride:`Filament overschrijven`,filamentOverrideHint:`Overschrijf filamenten optioneel voor modelgebaseerde toewijzing. De scheduler matcht op je geselecteerde filamenten in plaats van de oorspronkelijke 3MF-waarden.`,originalFilament:`Origineel`,overrideWith:`Overschrijven met`,resetToOriginal:`Terugzetten naar origineel`,insufficientFilamentTitle:`Niet genoeg filament`,waitingForAmsStatus:`Wachten op AMS-status van {{printer}}…`,insufficientFilamentMessage:`Sommige toegewezen spoelen bevatten minder filament dan deze afdruk nodig heeft:`,insufficientFilamentLine:`{{printer}} - {{slot}}: vereist {{required}}g, {{remaining}}g resterend`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: vereist {{required}}g, {{remaining}}g beschikbaar over overeenkomende spoelen (AMS Filament Backup)`,printAnyway:`Toch afdrukken`,forceColorMatch:`Kleurmatch afdwingen`,staggerPrinterStarts:`Printerstarts spreiden`,staggerGroupSize:`Groepsgrootte`,staggerInterval:`Interval (min)`,staggerPreview:`{{printers}} printers → {{groups}} groepen van {{size}}, starten elke {{interval}} min`,staggerLastGroup:`laatste groep: {{count}}`,staggerTotal:`totaal: {{minutes}} min`,staggerToPrinters:`Spreiden over {{count}} printers`,gcodeInjection:`Auto-print-G-code injecteren`,insufficientBudget:`Onvoldoende budget`,unlimitedNoBudget:`Onbeperkt – er is geen budgetlimiet ingesteld.`,noPrintableCostCenters:`Er is geen actieve kostenplaats beschikbaar voor afdrukken. Vraag een beheerder om je afdruktoegang te geven.`},backup:{includesEncryptionKey:`Lokale back-ups bevatten het MFA-versleutelingssleutelbestand (DATA_DIR/.mfa_encryption_key), zodat een back-up-ZIP op zichzelf compleet is. Behandel de ZIP als gevoelig — iedereen met het bestand kan de opgeslagen OIDC-clientgeheimen en TOTP-geheimen ontsleutelen.`,title:`Back-up en herstel`,createBackup:`Back-up maken`,restoreBackup:`Back-up herstellen`,restoreDescription:`Alle gegevens vervangen vanuit een back-upbestand`,downloadBackup:`Back-up downloaden`,uploadBackup:`Back-up uploaden`,lastBackup:`Laatste back-up`,autoBackup:`Automatische back-up`,backupNow:`Nu back-up maken`,restoreWarning:`Waarschuwing: het herstellen van een back-up overschrijft alle huidige gegevens.`,includeArchives:`Archieven opnemen`,includeSettings:`Instellingen opnemen`,includeProfiles:`Profielen opnemen`,backupSuccess:`Back-up succesvol gemaakt`,restoreSuccess:`Back-up succesvol hersteld`,backupFailed:`Back-up mislukt`,restoreFailed:`Herstellen mislukt`,restoreNote:`Virtuele printer wordt tijdens het herstellen gestopt`,githubBackup:`Git-back-up`,enabled:`Ingeschakeld`,cloudLoginRequired:`Bambu Cloud-login vereist. Log in onder Profielen → Cloudprofielen om GitHub-back-up in te schakelen.`,cloudLoginRequiredShort:`Cloudlogin vereist`,githubDescription:`Synchroniseer je profielen automatisch met een privé-GitHub-repository voor back-up en versiegeschiedenis.`,repoIsPrivate:`Repository is privé — veilig voor back-up.`,repoIsPublicWarning:`Repository is OPENBAAR. Bambuddy-back-ups bevatten MQTT-inloggegevens, Home Assistant-tokens, Prometheus-tokens, je Bambu Cloud-e-mailadres en printertoegangscodes via K-profielen. Opslaan is geblokkeerd totdat je de repository privé maakt in de instellingen van je provider.`,repoVisibilityUnknown:`De zichtbaarheid van de repository kon niet worden bepaald. Bambuddy weigert een back-up naar iets dat niet als privé is bevestigd; opslaan wordt geblokkeerd.`,repositoryUrl:`Repository-URL`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Onveilige HTTP toestaan`,allowInsecureHttpHint:`Inschakelen voor zelfgehoste instanties op privénetwerken zonder TLS`,personalAccessToken:`Personal Access Token`,tokenSaved:`(opgeslagen)`,enterNewToken:`Voer nieuw token in om bij te werken`,tokenHintGitHub:`Fine-grained token met lees- en schrijftoegang tot Contents, of een klassiek token met de repo-scope.`,tokenHintGitLab:`Token met de api-scope, of read_repository en write_repository samen.`,tokenHintGitea:`Token met de write:repository-scope.`,tokenHintForgejo:`Token met de write:repository-scope. Een token beperkt tot alleen deze repository is voldoende.`,branch:`Branch`,provider:`Git-provider`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Alleen handmatig`,hourly:`Elk uur`,daily:`Dagelijks`,weekly:`Wekelijks`,includeInBackup:`Opnemen in back-up`,kProfiles:`K-profielen`,kProfilesDescription:`Pressure-advance-kalibratie van verbonden printers`,noPrintersConnected:`Geen printers verbonden`,printersConnected:`{{connected}}/{{total}} verbonden`,cloudProfiles:`Cloudprofielen`,cloudProfilesDescription:`Filament-, printer- en procespresets uit Bambu Cloud en Orca Cloud`,cloudProfilesAccounts:`Verbonden accounts — Bambu Cloud: {{bambu}}, Orca Cloud: {{orca}}`,appSettings:`App-instellingen`,appSettingsDescription:`Bambuddy-configuratie (volledige database)`,spoolInventory:`Spoelvoorraad`,spoolInventoryDescription:`Filamentspoelen, verbruiksgeschiedenis en kostentracking`,printArchives:`Afdrukarchieven`,printArchivesDescription:`Metadata van afdrukgeschiedenis (geen gcode/3MF-bestanden)`,lastBackupAt:`Laatste back-up:`,noBackupsYet:`Nog geen back-ups`,next:`Volgende:`,startingBackup:`Back-up starten...`,test:`Testen`,enableBackup:`Back-up inschakelen`,testConnection:`Verbinding testen`,enterRepoUrl:`Voer repository-URL in`,enterRepoAndToken:`Voer repository-URL en toegangstoken in`,repoRequired:`Repository-URL is verplicht`,tokenRequired:`Toegangstoken is verplicht`,githubBackupEnabled:`GitHub-back-up ingeschakeld`,tokenUpdated:`Token bijgewerkt`,settingsSaved:`Instellingen opgeslagen`,failedToSave:`Opslaan mislukt: {{message}}`,backupCompleteFiles:`Back-up voltooid - {{count}} bestanden bijgewerkt`,backupSkippedNoChanges:`Back-up overgeslagen - geen wijzigingen`,backupFailed2:`Back-up mislukt: {{message}}`,clearedLogs:`{{count}} logboeken gewist`,failedToClearLogs:`Logboeken wissen mislukt: {{message}}`,restoreFromGit:{button:`Herstellen vanuit Git`,title:`Herstellen vanuit Git-back-up`,subtitle:`Kies een commit en wat je wilt herstellen`,commitLabel:`Back-upcommit`,latestCommit:`Nieuwste back-up (top van branch)`,categoriesLabel:`Wat herstellen`,inspecting:`Inhoud van back-up lezen...`,itemCount:`{{count}} in back-up`,overwriteLabel:`Bestaande items overschrijven`,overwriteOn:`Bestaande items worden bijgewerkt vanuit de back-up.`,overwriteOff:`Alleen ontbrekende items worden toegevoegd; bestaande blijven ongewijzigd.`,selectedCount:`{{count}} geselecteerd`,restoring:`Herstellen...`,confirmTitle:`Herstellen vanuit back-up?`,confirmMessage:`De geselecteerde categorieën worden uit deze commit hersteld. Ontbrekende items worden toegevoegd; bestaande blijven zoals ze zijn.`,confirmMessageOverwrite:`De geselecteerde categorieën worden uit deze commit hersteld en bestaande lokale items worden overschreven. Dit kan niet ongedaan worden gemaakt.`,kprofilesOverwriteCaveat:`K-profielen zijn de uitzondering: het schrijven van een sleuf vervangt altijd de kalibratie op de printer.`,tally:`{{restored}} hersteld, {{skipped}} overgeslagen, {{failed}} mislukt`,reloadHint:`Herlaad Bambuddy zodat de herstelde gegevens overal verschijnen.`,partialHint:`De hierboven vermelde categorieën zijn voltooid en staan op schijf. Ontbrekende categorieën zijn niet uitgevoerd.`,failed:`Herstellen mislukt.`,loadFailed:`Back-uprepository kon niet worden gelezen.`,details:{notPresent:`Niet aanwezig in deze back-upcommit`,unreadableJson:`Onleesbare JSON: {{paths}}`,settingsNoPayload:`Geen instellingen in payload`,settingsCredentialsWillSkip:`{{count}} sleutel(s) die op inloggegevens lijken worden overgeslagen`,settingsCompanionWillSkip:`{{count}} sleutel(s) die op inloggegevens lijken worden overgeslagen, en {{companion}} schakelaar(s) die daarvan afhankelijk zijn blijven uitgeschakeld`,settingsCompanionOnlyWillSkip:`{{companion}} schakelaar(s) blijven uitgeschakeld - de benodigde inloggegevens kunnen niet uit een back-up worden hersteld`,spoolsUsageCount:`inclusief {{count}} verbruiksrecord(s)`,archivesMetadataOnly:`Alleen metadata - 3MF-bestanden en miniaturen zitten niet in een Git-back-up`,kprofilesPrinterCount:`over {{count}} printer(s)`},notes:{noData:`Geen gegevens van dit type in deze back-up`,archivesPrinterMissing:`Sommige archieven verwezen naar printers die niet meer bestaan - koppeling gewist`,archivesProjectMissing:`Sommige archieven verwezen naar projecten die niet meer bestaan - koppeling gewist`,archivesOwnerCleared:`Sommige archieven verwezen naar gebruikers die niet meer bestaan - eigenaar gewist, waardoor ze alleen zichtbaar zijn voor gebruikers met de machtiging archives:read_all totdat een beheerder ze opnieuw toewijst`,archivesOwnerUnmatched:`Sommige archieven noemen een eigenaar die deze instantie niet heeft - eigenaar gewist in plaats van te gokken op basis van het gebruikers-ID uit de back-up, waardoor ze alleen zichtbaar zijn voor gebruikers met de machtiging archives:read_all totdat een beheerder ze opnieuw toewijst`,archivesOwnerUnknown:`Sommige archieven zijn zonder eigenaar hersteld - deze back-up registreert er geen, waardoor ze alleen zichtbaar zijn voor gebruikers met de machtiging archives:read_all totdat een beheerder ze opnieuw toewijst`,archivesUndeleted:`Archief/archieven die sinds de back-up waren verwijderd zijn weer zichtbaar - overschrijven stond aan`,archivesMetadataOnly:`Herstelde archieven bevatten alleen metadata - de 3MF- en miniatuurbestanden zitten niet in een Git-back-up`,spoolUsageUnresolved:`{{count}} verbruiksrecord(s) overgeslagen - hun spoel staat niet in de spoellijst van deze back-up, dus er is niets om ze aan te koppelen.`,spoolUsageUnlinked:`{{count}} verbruiksrecord(s) hersteld zonder koppeling met afdrukgeschiedenis - selecteer Afdrukarchieven samen met Spoelvoorraad om deze te behouden.`,spoolTagKept:`{{count}} spoeltag(s) gelaten zoals ze zijn - de back-up zou een tag hebben gewist die sindsdien is gescand, of een tag naar een tweede spoel hebben verplaatst.`,settingsCredentialsSkipped:`{{count}} sleutel(s) die op inloggegevens lijken overgeslagen - voer geheimen handmatig opnieuw in`,settingsAuthSkipped:`{{count}} authenticatie-instelling(en) overgeslagen - wijzig deze onder Instellingen > Authenticatie zodat vergrendelingscontroles blijven werken`,settingsCompanionSkipped:`{{keys}} blijven uitgeschakeld - de benodigde inloggegevens kunnen niet uit een back-up worden hersteld en deze instantie heeft er geen opgeslagen, dus inschakelen zou de integratie zonder authenticatie achterlaten`,settingsMqttRelayFailed:`MQTT-instellingen hersteld, maar de relay kon niet opnieuw verbinden - start Bambuddy opnieuw`,kprofilesAlwaysOverwrite:`K-profielen overschrijven altijd de overeenkomende sleuf op de printer`,kprofilesAckUnreliable:`Een printer die niet antwoordt telt nog steeds als hersteld - controleer de profielen op de printer`,kprofilesPrinterMissing:`Geen printer met serienummer {{serial}} - overgeslagen`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) is niet verbonden - overgeslagen`,kprofilesUnknownNozzle:`Onverwachte nozzlediameter {{nozzle}} voor {{serial}} - ongewijzigd verzonden`,kprofilesUnmatched:`{{count}} profiel(en) voor {{nozzle}} hadden geen tegenhanger op {{printer}} - als nieuwe profielen toegevoegd`,kprofilesSendFailed:`Verzenden van {{nozzle}}-profielen naar {{printer}} ({{serial}}) mislukt`,kprofilesRefused:`{{printer}} ({{serial}}) weigerde de {{nozzle}}-profielen: {{reason}}`,kprofilesStepFailed:`De K-profielstap kon niet worden voltooid - {{reason}}. Alles wat daarvoor is hersteld blijft opgeslagen.`}},history:`Geschiedenis`,clear:`Wissen`,date:`Datum`,status:`Status`,trigger:`Type`,triggers:{manual:`Back-up (handmatig)`,scheduled:`Back-up (gepland)`,restore:`Herstellen`},commit:`Commit`,localBackup:`Lokale back-up`,localBackupDescription:`Maak een volledige back-up van je Bambuddy-gegevens inclusief database, archieven, uploads en alle bestanden.`,downloadBackupLabel:`Back-up downloaden`,completeBackupZip:`Volledige back-up: database + alle bestanden (ZIP)`,download:`Downloaden`,preparingBackup:`Back-up voorbereiden...`,creatingArchive:`Back-uparchief maken... Dit kan even duren bij grote archieven.`,downloadingFile:`Back-upbestand downloaden...`,backupDownloaded:`Back-up succesvol gedownload`,failedToCreateBackup:`Back-up maken mislukt: {{message}}`,restore:`Herstellen`,restoreReplacesAll:`Herstellen vervangt alle gegevens.`,restoreReplacesAllDetail:`Je huidige database en bestanden worden volledig vervangen. Na herstel is een herstart vereist.`,restoreConfirmTitle:`Back-up herstellen`,restoreConfirmMessage:`Weet je zeker dat je wilt herstellen vanuit "{{filename}}"? Hiermee worden je huidige database en alle bestanden volledig vervangen. De applicatie moet daarna opnieuw worden gestart.`,restoreConfirmButton:`Back-up herstellen`,uploadingFile:`Back-upbestand uploaden...`,backupRestoredRestart:`Back-up hersteld. Start Bambuddy opnieuw.`,failedToRestore:`Back-up herstellen mislukt. Controleer het bestandsformaat.`,reloadNow:`Nu herladen`,creatingBackup:`Back-up maken`,restoringBackup:`Back-up herstellen`,preparing:`Voorbereiden...`,processing:`Verwerken...`,doNotClosePage:`Sluit deze pagina niet en navigeer niet weg. Deze bewerking kan bij grote back-ups enkele minuten duren.`,restoring:`Herstellen...`,restoreComplete:`Herstel voltooid`,restoreFailed2:`Herstel mislukt`,importSettings:`Instellingen importeren uit een back-upbestand`,pleaseWaitRestoring:`Wacht terwijl je gegevens worden hersteld`,selectBackupFile:`Klik om een back-upbestand te selecteren (.json of .zip)`,duplicateHandling:`Zo werkt afhandeling van duplicaten:`,matchPrinters:`Printers`,matchPrintersBy:`gekoppeld op serienummer`,matchSmartPlugs:`Slimme stekkers`,matchSmartPlugsBy:`gekoppeld op IP-adres`,matchNotificationProviders:`Meldingsproviders`,matchNotificationProvidersBy:`gekoppeld op naam`,matchFilaments:`Filamenten`,matchFilamentsBy:`gekoppeld op naam + type + merk`,matchArchives:`Archieven`,matchArchivesBy:`gekoppeld op inhoudshash (altijd overgeslagen)`,matchPendingUploads:`Openstaande uploads`,matchPendingUploadsBy:`gekoppeld op bestandsnaam`,matchSettingsTemplates:`Instellingen en sjablonen`,matchSettingsTemplatesBy:`altijd overschreven`,replaceExisting:`Bestaande gegevens vervangen`,keepExisting:`Bestaande gegevens behouden`,overwriteDescription:`Items die al bestaan overschrijven met gegevens uit de back-up`,keepDescription:`Alleen items herstellen die nog niet bestaan`,overwriteCaution:`Let op:`,overwriteWarning:`Overschrijven vervangt je huidige configuraties met gegevens uit de back-up. Printertoegangscodes worden om veiligheidsredenen nooit overschreven.`,cancel:`Annuleren`,processingBackup:`Back-upbestand verwerken...`,itemsRestored:`Items hersteld`,itemsSkipped:`Items overgeslagen`,restored:`Hersteld`,skippedAlreadyExist:`Overgeslagen (bestaan al)`,filesCategory:`Bestanden (3MF, miniaturen, enz.)`,andMore:`...en {{count}} meer`,newApiKeysGenerated:`Nieuwe API-sleutels gegenereerd`,keysShownOnce:`Deze sleutels worden maar één keer getoond. Kopieer ze nu!`,copy:`Kopiëren`,noDataFound:`Er zijn geen gegevens gevonden om uit het back-upbestand te herstellen.`,close:`Sluiten`,scheduledBackup:`Geplande back-ups`,scheduledBackupDescription:`Maak automatisch back-upsnapshots volgens een schema. De uitvoermap kan aan een NAS of externe opslag worden gekoppeld.`,frequency:`Frequentie`,backupTime:`Tijd`,retention:`Bewaartermijn`,retentionDescription:`Aantal back-ups om te bewaren`,outputPath:`Uitvoerpad`,outputPathPlaceholder:`Standaard: {{path}}`,outputPathDescription:`Laat leeg voor standaardlocatie`,runNow:`Nu uitvoeren`,backupFiles:`Back-upbestanden`,noScheduledBackups:`Nog geen back-ups`,deleteBackup:`Verwijderen`,deleteBackupConfirm:`Dit back-upbestand verwijderen?`,backupRunning:`Back-up bezig...`,scheduledBackupComplete:`Back-up succesvol voltooid`,scheduledBackupFailed:`Back-up mislukt`,nextBackup:`Volgende back-up`,backupSize:`Grootte`,localTimeHint:`Lokale tijd ({{tz}})`,defaultPathLabel:`Standaard:`,pathCheck:{title:`Bambuddy kan niet naar deze map schrijven`,howToFix:`Oplossing:`,sandboxed:`De Bambuddy-service kan niet naar {{path}} schrijven. De systemd-unit draait met ProtectSystem=strict, waardoor elke map buiten de installatie-, data- en logmappen alleen-lezen is voor de service - zelfs als je er vanuit je eigen shell wel naar kunt schrijven.`,read_only:`{{path}} staat op een alleen-lezen bestandssysteem.`,permission_denied:`Bambuddy mag niet schrijven naar {{path}}. Controleer de eigenaar en machtigingen van de map.`,no_space:`Het bestandssysteem waarop {{path}} staat is vol.`,not_a_directory:`{{path}} bestaat, maar is geen map.`,missing:`{{path}} bestaat niet en kon niet worden aangemaakt.`,error:`Bambuddy kan niet schrijven naar {{path}}.`,ephemeralTitle:`Deze back-ups blijven niet behouden na een herstart van de container`,container_ephemeral:`{{path}} bevindt zich in de Bambuddy-container, niet op de host. Back-ups die daar worden opgeslagen gaan verloren wanneer de container opnieuw wordt aangemaakt. Koppel de map vanaf de host:`},categories:{settings:`Instellingen`,notification_providers:`Meldingsproviders`,notification_templates:`Meldingssjablonen`,smart_plugs:`Slimme stekkers`,printers:`Printers`,filaments:`Filamenten`,maintenance_types:`Onderhoudstypen`,archives:`Archieven`,projects:`Projecten`,pending_uploads:`Openstaande uploads`,external_links:`Externe links`,api_keys:`API-sleutels`}},tags:{title:`Tags`,addTag:`Tag toevoegen`,editTag:`Tag bewerken`,deleteTag:`Tag verwijderen`,tagName:`Tagnaam`,tagColor:`Tagkleur`,noTags:`Geen tags`,deleteConfirm:`Weet je zeker dat je deze tag wilt verwijderen?`,manageTags:`Tags beheren`},uploadModal:{title:`3MF-bestanden uploaden`,dragDrop:`Sleep .3mf-bestanden hierheen`,or:`of`,browseFiles:`Bestanden bladeren`,extractionInfo:`Het printermodel wordt automatisch uit de metadata van het 3MF-bestand gehaald.`,uploaded:`geüpload`,failed:`mislukt`,uploading:`Uploaden...`,upload:`Uploaden`,uploadFailed:`Upload mislukt`},editArchive:{title:`Archief bewerken`,name:`Naam`,namePlaceholder:`Afdruknaam`,printer:`Printer`,noPrinter:`Geen printer`,project:`Project`,noProject:`Geen project`,itemsPrinted:`Afgedrukte items`,itemsPrintedHelp:`Aantal items dat met deze afdruktaak is geproduceerd. Gebruik 0 als de hele plaat mislukt is.`,filamentUsed:`Gebruikt filament (g)`,filamentUsedPlaceholder:`bijv. 46.16`,filamentUsedHelp:`Stel dit handmatig in wanneer een afdruk zonder 3MF is gearchiveerd, zodat deze toch meetelt in de filamenttotalen. Bij het opnieuw scannen van een archief met een 3MF wordt de waarde weer uit het bestand gelezen.`,notes:`Notities`,notesPlaceholder:`Voeg notities over deze afdruk toe...`,externalLink:`Externe link`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Link naar Printables, Thingiverse of een andere bron`,tags:`Tags`,tagsPlaceholder:`Tags toevoegen...`,addMoreTags:`Meer tags toevoegen...`,matchingTags:`Komt overeen met "{{query}}"`,existingTags:`Bestaande tags`,clickToAdd:`(klik om toe te voegen)`,status:`Status`,failureReason:`Reden van mislukking`,selectReason:`Selecteer reden...`,photos:`Foto's van het afdrukresultaat`,photosHelp:`Klik op + om foto's van je afdrukresultaat toe te voegen`,printResult:`Afdrukresultaat`,saving:`Opslaan...`,failureReasons:{adhesionFailure:`Hechtingsprobleem`,spaghettiDetached:`Spaghetti / losgeraakt`,layerShift:`Laagverschuiving`,cloggedNozzle:`Verstopte nozzle`,filamentRunout:`Filament op`,warping:`Kromtrekken`,stringing:`Draadvorming`,underExtrusion:`Onderextrusie`,powerFailure:`Stroomuitval`,userCancelled:`Door gebruiker geannuleerd`,noStatusUpdate:`Geen statusupdate ontvangen`,other:`Overig`},statuses:{completed:`Voltooid`,failed:`Mislukt`,aborted:`Geannuleerd`,printing:`Bezig met afdrukken`}},kProfiles:{title:`K-profielen`,noPrintersConfigured:`Geen printers geconfigureerd`,addPrinterInSettings:`Voeg in Instellingen een printer toe om K-profielen te beheren`,noActivePrinters:`Geen actieve printers`,enablePrinterConnection:`Schakel een printerverbinding in om de K-profielen te bekijken`,loadingProfiles:`K-profielen laden...`,printerOffline:`Printer offline`,printerOfflineDesc:`De geselecteerde printer is niet verbonden. Schakel hem in om de K-profielen te bekijken.`,noMatchingProfiles:`Geen overeenkomende profielen`,noMatchingProfilesDesc:`Geen profielen komen overeen met je zoekcriteria`,noKProfiles:`Geen K-profielen`,noKProfilesDesc:`Geen pressure-advance-profielen gevonden voor een nozzle van {{diameter}} mm`,createFirstProfile:`Eerste profiel aanmaken`,printer:`Printer`,nozzle:`Nozzle`,refresh:`Vernieuwen`,addProfile:`Profiel toevoegen`,export:`Exporteren`,import:`Importeren`,select:`Selecteren`,selectAll:`Alles selecteren`,delete:`Verwijderen`,searchPlaceholder:`Zoeken op naam of filament...`,allExtruders:`Alle extruders`,leftOnly:`Alleen links`,rightOnly:`Alleen rechts`,allFlow:`Alle flowtypen`,hfOnly:`Alleen HF`,sOnly:`Alleen S`,sortName:`Sorteren: naam`,sortKValue:`Sorteren: K-waarde`,sortFilament:`Sorteren: filament`,leftExtruder:`Linker extruder`,rightExtruder:`Rechter extruder`,modal:{addTitle:`K-profiel toevoegen`,editTitle:`K-profiel bewerken`,profileName:`Profielnaam`,profileNamePlaceholder:`Mijn PLA-profiel`,kValue:`K-waarde`,kValuePlaceholder:`0.020`,kValueHelp:`Typisch bereik: 0.01 - 0.06 voor PLA, 0.02 - 0.10 voor PETG`,filament:`Filament`,selectFilament:`Selecteer filament...`,source:{local:`Geïmporteerd`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Ingebouwd`},noFilamentsHelp:`Geen filamenten beschikbaar. Meld je aan bij Bambu Cloud of importeer presets via Profielen → Lokale profielen.`,searchFilaments:`Filamenten zoeken...`,noFilamentMatches:`Geen filament komt overeen met die zoekopdracht`,flowType:`Flowtype`,highFlow:`Hoge flow`,standard:`Standaard`,nozzleSize:`Nozzlegrootte`,extruder:`Extruder`,extruders:`Extruders`,left:`Links`,right:`Rechts`,notes:`Notities (lokaal opgeslagen)`,notesPlaceholder:`Voeg notities over dit profiel toe...`,notesHelp:`Notities worden opgeslagen in Bambuddy, niet op de printer`,syncing:`Synchroniseren met printer...`,savingExtruder:`Opslaan naar extruder {{current}}/{{total}}...`,pleaseWait:`Even geduld`},deleteConfirm:{title:`Profiel verwijderen`,cannotUndo:`Dit kan niet ongedaan worden gemaakt`,message:`Weet je zeker dat je "{{name}}" van de printer wilt verwijderen?`},bulkDelete:{title:`Profielen verwijderen`,cannotUndo:`Dit kan niet ongedaan worden gemaakt`,message:`Weet je zeker dat je {{count}} geselecteerde profielen van de printer wilt verwijderen?`},toast:{profileSaved:`K-profiel opgeslagen`,profilesSaved:`K-profiel opgeslagen naar {{count}} extruders`,selectAtLeastOneExtruder:`Selecteer ten minste één extruder`,selectFilament:`Selecteer eerst een filament`,filamentNotResolvable:`Geen Bambu-filament-ID voor {{name}} — de printer kan hiervoor geen profiel opslaan`,profileDeleted:`K-profiel verwijderd`,profilesDeleted:`{{count}} profielen verwijderd`,exportedProfiles:`{{count}} profielen geëxporteerd`,importedProfiles:`{{count}} van {{total}} profielen geïmporteerd`,noProfilesToExport:`Geen profielen om te exporteren`,invalidFileFormat:`Ongeldig bestandsformaat`,failedToParseImport:`Importbestand kon niet worden verwerkt`,failedToSaveBatch:`K-profielen opslaan mislukt`,noteSaved:`Notitie opgeslagen`,failedToSaveNote:`Notitie opslaan mislukt`},permission:{noRead:`Je hebt geen toestemming om profielen te vernieuwen`,noCreate:`Je hebt geen machtiging om profielen toe te voegen`,noUpdate:`Je hebt geen machtiging om K-profielen bij te werken`,noDelete:`Je hebt geen machtiging om K-profielen te verwijderen`,noExport:`Je hebt geen machtiging om profielen te exporteren`,noImport:`Je hebt geen machtiging om profielen te importeren`}},virtualPrinter:{title:`Virtuele printer`,running:`Actief`,stopped:`Gestopt`,description:{default:`Schakel een virtuele printer in die zichtbaar wordt in Bambu Studio en OrcaSlicer. Bestanden die naar deze printer worden gestuurd, worden direct gearchiveerd zonder te worden afgedrukt.`,proxy:`Schakel een proxy in die slicerverkeer doorstuurt naar een echte printer, zodat je via elk netwerk op afstand kunt afdrukken.`},enable:{title:`Virtuele printer inschakelen`,visibleInSlicer:`Zichtbaar als "Bambuddy" in slicerdetectie`,proxyingTo:`Proxy naar {{name}}`,notActive:`Niet actief`},model:{title:`Printermodel`,description:`Selecteer welk printermodel moet worden geëmuleerd.`,restartWarning:`Als je het model wijzigt, wordt de virtuele printer opnieuw gestart`},accessCode:{title:`Toegangscode`,isSet:`Toegangscode is ingesteld`,notSet:`Geen toegangscode ingesteld - vereist om in te schakelen`,placeholder:`Voer een code van 8 tekens in`,placeholderChange:`Voer een nieuwe code in om te wijzigen`,hint:`Moet precies 8 tekens zijn. Wordt door slicers gebruikt voor authenticatie.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Overgenomen van doelprinter`,derivedFromTargetHint:`Gebruikt de toegangscode van de doelprinter. De bridge stuurt de slicerauthenticatie door naar de echte printer, dus de codes moeten overeenkomen — bewerk de toegangscode van de printer om deze waarde te wijzigen.`,reveal:`Toegangscode tonen`,hide:`Toegangscode verbergen`},targetPrinter:{title:`Doelprinter`,configured:`Proxydoel geconfigureerd`,notConfigured:`Geen doelprinter geselecteerd - vereist voor proxymodus`,placeholder:`Selecteer een printer...`,hint:`Selecteer de printer waarnaar slicerverkeer via de proxy moet worden doorgestuurd. De printer moet in LAN-modus staan.`,noPrinters:`Geen printers geconfigureerd. Voeg eerst een printer toe om de proxymodus te gebruiken.`},remoteInterface:{title:`Overschrijving netwerkinterface`,configured:`Interface-overschrijving actief`,optional:`Optioneel - gebruik dit als het automatisch gedetecteerde IP-adres onjuist is (bijv. meerdere NIC's, Docker, VPN)`,placeholder:`Automatisch detecteren (standaard)...`,hint:`Overschrijf het IP-adres dat via SSDP wordt geadverteerd en in het TLS-certificaat wordt gebruikt. Handig wanneer Bambuddy meerdere netwerkinterfaces heeft.`},mode:{title:`Modus`,archive:`Archief`,archiveDesc:`Bestanden direct archiveren`,review:`Beoordelen`,reviewDesc:`Beoordelen vóór archiveren`,queue:`Wachtrij`,queueDesc:`Archiveren en aan wachtrij toevoegen`,proxy:`Proxy`,proxyDesc:`Doorsturen naar echte printer`},autoDispatch:{title:`Automatisch verzenden`,description:`Start afdrukken automatisch wanneer ze aan de wachtrij worden toegevoegd. Als dit uitstaat, wachten afdrukken op handmatige verzending.`},queueForceColorMatch:{title:`Kleurmatch afdwingen`,description:`Weiger een taak te verzenden naar een printer waarop niet exact het juiste filamenttype en de juiste kleur zijn geladen. Standaard uit — zonder dit gebruikt de wachtrij alleen modelmatching en kan een printer worden gekozen waarop de verkeerde kleur is geladen.`},saveAmsMapping:{title:`AMS-toewijzing opslaan`,description:`Sla de AMS-slotkeuze van de slicer zelf (uit de MQTT-opdracht project_file) op in het archief, zodat bij later opnieuw afdrukken exact dezelfde fysieke spoel wordt gebruikt in plaats van opnieuw een keuze af te leiden uit type/kleur van het bestand. Standaard uit.`},gcodeInjection:{title:`G-code-injectie`,description:`Pas de per model ingestelde G-codefragmenten uit Instellingen toe op taken van deze VP. Standaard uit.`},tailscaleDisabled:{title:`Tailscale-integratie`,description:`Schakel dit in om deze VP als via Tailscale beschikbaar te markeren. Toont het Tailscale-adres van de host, zodat je weet welk IP-adres je in de slicer moet invoeren. De stap voor het importeren van de CA blijft hetzelfde — deze schakelaar heeft geen invloed op certificaten.`},setupRequired:{title:`Installatie vereist`,description:`Voor de functie virtuele printer is aanvullende systeemconfiguratie nodig voordat deze werkt. Dit omvat port forwarding, firewallregels en platformspecifieke instellingen.`,readGuide:`Lees de installatiehandleiding voordat je dit inschakelt`},archiveNameSource:{title:`Bron voor archiefnaam`,description:`Kies hoe nieuwe archieven worden genoemd wanneer bestanden via de virtuele printer binnenkomen. "Metadata" gebruikt de in de slicer opgenomen Titel uit de 3MF (standaard). "Bestandsnaam" gebruikt de bestandsnaam die Bambu Studio via FTP heeft verzonden. Let op: Bambu Studio overschrijft de naam die je in het dialoogvenster "naar printer verzenden" invoert met het Titel-veld van de 3MF wanneer dat aanwezig is, waardoor beide modi vaak dezelfde tekst opleveren.`,metadata:`Metadata`,filename:`Bestandsnaam`},caCert:{title:`Slicercertificaat`,description:`Virtuele printers gebruiken een TLS-certificaat dat is ondertekend door de Bambuddy-CA. Importeer dit CA-certificaat eenmalig in de trust store van je slicer zodat de verbinding wordt geaccepteerd — je hoeft het niet via de opdrachtregel te kopiëren.`,copy:`Kopiëren`,copied:`Gekopieerd`,download:`Downloaden`,fingerprint:`SHA-256`},howItWorks:{title:`Hoe het werkt`,step1:`Op hetzelfde LAN verschijnen virtuele printers automatisch in je slicer (Bambu Studio / OrcaSlicer) via detectie. Vanaf andere netwerken voeg je ze handmatig toe met IP-adres en toegangscode.`,step2:`Gebruik in de modi Archief, Beoordelen en Wachtrij de knop "Verzenden" in je slicer om 3MF-bestanden naar Bambuddy te uploaden. De slicer toont "Afdruk geslaagd" — het bestand wordt opgeslagen, niet afgedrukt.`,step3:`In proxymodus stuurt de virtuele printer al het verkeer door naar een echte printer — afdrukken starten direct alsof je rechtstreeks verbonden bent.`},status:{title:`Statusdetails`,printerName:`Printernaam`,model:`Model`,serialNumber:`Serienummer`,mode:`Modus`,pendingFiles:`Bestanden in behandeling`,targetPrinter:`Doelprinter`,ftpPort:`FTP-poort`,mqttPort:`MQTT-poort`,ftpConnections:`FTP-verbindingen`,mqttConnections:`MQTT-verbindingen`},toast:{updated:`Instellingen virtuele printer bijgewerkt`,failedToUpdate:`Instellingen bijwerken mislukt`,copyFailed:`Kopiëren mislukt — probeer de tekst handmatig te selecteren`,accessCodeRequired:`Stel eerst een toegangscode in`,targetPrinterRequired:`Selecteer eerst een doelprinter`,bindIpRequired:`Stel eerst een bind-IP in`,accessCodeEmpty:`Toegangscode mag niet leeg zijn`,accessCodeLength:`Toegangscode moet precies 8 tekens zijn`,targetCodeChangedRebind:`De toegangscode komt nu overeen met de nieuwe doelprinter. Voeg dit apparaat opnieuw toe in je slicer om de nieuwe code te gebruiken.`,created:`Virtuele printer aangemaakt`,failedToCreate:`Virtuele printer aanmaken mislukt`,deleted:`Virtuele printer verwijderd`,failedToDelete:`Virtuele printer verwijderen mislukt`},list:{title:`Virtuele printers`,add:`Toevoegen`,addFirst:`Virtuele printer toevoegen`,empty:`Geen virtuele printers geconfigureerd. Voeg er een toe om te beginnen.`},bindIp:{title:`Bind-interface`,placeholder:`Selecteer interface...`,hint:`Netwerkinterface waaraan deze virtuele printer wordt gekoppeld. Moet uniek zijn per printer.`},proxy:{accessCodeHint:`Gebruik in proxymodus de toegangscode van je doelprinter in de slicer. De verbinding wordt transparant doorgestuurd naar de echte printer.`},addDialog:{title:`Virtuele printer toevoegen`,name:`Naam`,hint:`Je kunt de toegangscode, doelprinter en andere instellingen na het aanmaken configureren.`,create:`Maken`},deleteConfirm:{title:`Virtuele printer verwijderen`,message:`Weet je zeker dat je "{{name}}" wilt verwijderen? Hiermee worden alle services voor deze printer gestopt.`}},modelViewer:{openInSlicer:`Openen in slicer`,openInSlicerWith:`Openen in {{slicer}}`,moreSlicerOptions:`Meer sliceropties`,openInSlicerFailed:`Kon niet openen in slicer`,tabs:{model:`3D-model`},notAvailable:`niet beschikbaar`,plates:`Platen`,allPlates:`Alle platen`,plateNumber:`Plaat {{number}}`,plateCount:`{{count}} plaat`,plateCount_other:`{{count}} platen`,objectCount:`{{count}} object`,objectCount_other:`{{count}} objecten`,filamentCount:`{{count}} filament`,filamentCount_other:`{{count}} filamenten`,eta:`ETA {{minutes}} min`,noPreview:`Geen voorbeeld beschikbaar voor dit bestand`,pagination:{pageOf:`Pagina {{current}} van {{total}}`,prev:`Vorige`,next:`Volgende`},errors:{failedToLoad:`Bestand laden mislukt`,noMeshes:`Geen meshes gevonden in 3MF-bestand`,unsupportedFormat:`Niet-ondersteund bestandsformaat`}},maintenanceDescriptions:{lubricateCarbonRods:`Breng smeermiddel aan op de carbonstangen voor soepele beweging`,lubricateRails:`Breng smeermiddel aan op de lineaire rails voor soepele beweging`,cleanNozzle:`Reinig hotend en nozzle om verstoppingen te voorkomen`,checkBelts:`Controleer de riemspanning voor nauwkeurige afdrukken`,cleanBuildPlate:`Reinig de bouwplaat voor betere hechting`,checkExtruder:`Controleer de extrudertandwielen op slijtage`,checkCooling:`Controleer of de koelventilatoren goed werken`,generalInspection:`Algemene printerinspectie`,cleanCarbonRods:`Reinig de carbonstangen om wrijving te verminderen`,lubricateSteelRods:`Breng smeermiddel aan op de stalen stangen voor soepele beweging`,cleanSteelRods:`Reinig de stalen stangen om wrijving te verminderen`,cleanLinearRails:`Veeg de lineaire rails schoon om stof en vuil te verwijderen`,checkPtfeTube:`Controleer de PTFE-buis op slijtage of beschadiging`,replaceHepaFilter:`Vervang het HEPA-filter voor een goede luchtkwaliteit`,replaceCarbonFilter:`Vervang het actieve-koolfilter`,lubricateLeftNozzleRail:`Smeer de linker nozzlerail (H2-serie)`},haSensors:{label:`Sensoren`,unavailable:`Niet beschikbaar`,blocksPrints:`{{entity}} — houdt afdrukken tegen en geeft een melding`,states:{open:`Open`,closed:`Gesloten`,unlocked:`Ontgrendeld`,locked:`Vergrendeld`,detected:`Gedetecteerd`,clear:`Wissen`,wet:`Nat`,dry:`Droog`,problem:`Probleem`,ok:`OK`,running:`Actief`,stopped:`Gestopt`,on:`Aan`,off:`Uit`},sectionTitle:`Home Assistant-sensoren`,add:`Sensor toevoegen`,addTitle:`Home Assistant-sensor toevoegen`,editTitle:`Home Assistant-sensor bewerken`,empty:`Nog geen sensoren. Koppel een deurcontact of thermometer uit Home Assistant om deze op een printerkaart te tonen.`,unknownPrinter:`Onbekende printer`,badgeBlocks:`Houdt afdrukken tegen`,badgeNotifies:`Meldt`,badgeHidden:`Verborgen op kaart`,printer:`Printer`,entity:`Entiteit`,searchPlaceholder:`Entiteiten zoeken...`,noEntities:`Geen overeenkomende entiteiten`,name:`Weergavenaam`,alertWhen:`Waarschuwen wanneer`,alertNever:`Nooit — alleen weergeven`,alertAbove:`Boven`,alertBelow:`Onder`,alertHint:`De alarmstatus markeert de sensor op de printerkaart en schakelt de onderstaande opties in.`,showOnCard:`Tonen op printerkaart`,notifyOnAlert:`Stuur een melding wanneer een alarm begint`,blockPrint:`Houd afdrukken in de wachtrij tegen zolang er een alarm is`,blockPrintHint:`Taken blijven in de wachtrij en starten vanzelf zodra de sensor weer normaal is. Wordt genegeerd als Home Assistant niet bereikbaar is.`,toast:{created:`Sensor toegevoegd`,updated:`Sensor opgeslagen`,deleted:`Sensor verwijderd`},error:{pickEntity:`Kies een Home Assistant-entiteit`,nameRequired:`Voer een weergavenaam in`,printerRequired:`Kies een printer`,alertRequired:`Stel eerst een alarmvoorwaarde in`}},locationHaSensors:{sectionTitle:`Home Assistant-sensoren (opslaglocaties)`,sectionDescription:`Koppel temperatuur-, luchtvochtigheids- of batterijsensoren uit Home Assistant aan je opslaglocaties om live waarden te tonen op de filamentkaart en in de tabel. Per locatie is één sensor per categorie toegestaan.`,add:`Sensor toevoegen`,addTitle:`Home Assistant-sensor toevoegen`,editTitle:`Home Assistant-sensor bewerken`,empty:`Nog geen sensoren. Koppel een temperatuur- of luchtvochtigheidssensor uit Home Assistant om deze op de filamentkaart te tonen.`,unknownLocation:`Onbekende locatie`,location:`Opslaglocatie`,showOnCard:`Tonen op filamentkaart`,overwriteConfirm:{title:`Bestaande sensor vervangen?`,messageTemperature:`"{{location}}" heeft al een temperatuursensor gekoppeld: {{name}}. Doorgaan vervangt deze.`,messageHumidity:`"{{location}}" heeft al een luchtvochtigheidssensor gekoppeld: {{name}}. Doorgaan vervangt deze.`,messageBattery:`"{{location}}" heeft al een batterijsensor gekoppeld: {{name}}. Doorgaan vervangt deze.`},autoAdd:{confirmTitle:`De andere sensoren ook toevoegen?`,confirmMessage:`Bambuddy heeft ook andere sensoren voor deze locatie gevonden. Kies welke je ook wilt toevoegen.`,added:`Ook toegevoegd: {{names}}`,noneFound:`Geen bijpassende temperatuur-, luchtvochtigheids- of batterijsensoren gevonden voor deze locatie.`,onlyThisOne:`Alleen deze`},options:{buttonLabel:`Sensoropties`,title:`Opties voor locatiesensoren`,description:`Deze waarden worden gebruikt wanneer een temperatuur-, luchtvochtigheids- of batterijsensor automatisch wordt gekoppeld naast de eerste sensor van een locatie.`,generalSettings:`Algemene instellingen`,pollInterval:`Bijwerkinterval (seconden)`,pollIntervalHint:`Hoe vaak Bambuddy Home Assistant raadpleegt en sensorwaarden op het scherm ververst. Minimaal 60 seconden.`,colorizeValues:`Sensorwaarden inkleuren op basis van hun alarmdrempels`,aboveColor:`Kleur boven drempel`,belowColor:`Kleur onder drempel`,optimalColor:`Kleur bij optimale waarde`,colors:{red:`Rood`,orange:`Oranje`,yellow:`Geel`,green:`Groen`,blue:`Blauw`,purple:`Paars`,pink:`Roze`},saved:`Opties opgeslagen`,saveFailed:`Opslaan van opties mislukt`,reset:`Herstellen`,resetConfirm:{title:`Alle bestaande locatiesensoren herstellen?`,message:`Dit overschrijft de alarmdrempels, meldingen en kaartzichtbaarheid van elke bestaande temperatuur-, luchtvochtigheids- en batterijsensor van opslaglocaties met de hierboven ingestelde waarden, en herstelt de naam van elke sensor naar de vriendelijke naam uit Home Assistant — printersensoren blijven ongewijzigd. Dit kan niet ongedaan worden gemaakt. Afhankelijk van het aantal sensoren kan dit even duren.`},resetDone:`Toegepast op {{count}} locatiesensoren`,resetFailed:`Herstellen van locatiesensoren mislukt`},deleteAllConfirm:{title:`Alle sensoren verwijderen?`,message:`Hiermee worden alle {{count}} sensoren verwijderd die aan "{{location}}" zijn gekoppeld. Dit kan niet ongedaan worden gemaakt.`},currentlyBound:`Momenteel gekoppeld: {{entity}}`,error:{locationRequired:`Kies een opslaglocatie`},toast:{created:`Sensor toegevoegd`,updated:`Sensor opgeslagen`,deleted:`Sensor verwijderd`}},smartPlugs:{offline:`Offline`,admin:`Beheerder`,openPlugAdminPage:`Beheerpagina van stekker openen`,deleteSmartPlug:`Slimme stekker verwijderen`,turnOnSmartPlug:`Slimme stekker inschakelen`,turnOffSmartPlug:`Slimme stekker uitschakelen`,turnOn:`Inschakelen`,turnOff:`Uitschakelen`,addSmartPlug:{scanningNetwork:`Netwerk scannen...`,chooseEntity:`Kies een entiteit...`,connectionFailed:`Verbinding mislukt`,searchEntities:`Entiteiten zoeken...`,searchPowerSensors:`Vermogenssensoren zoeken...`,searchEnergySensors:`Energiesensoren zoeken...`,placeholders:{plugName:`Woonkamerstekker`,mqttStateOnValue:`AAN, true, 1`,mqttSameAsPower:`Hetzelfde als vermogensonderwerp, of anders`}},linkedTo:`Gekoppeld aan:`,monitorOnly:`Alleen bewaken`,alerts:`Waarschuwingen`,scheduleOn:`Aan {{time}}`,scheduleOff:`Uit {{time}}`,on:`Aan`,off:`Uit`,power:`Vermogen`,kwhToday:`kWh vandaag`,settings:`Instellingen`,automationSettings:`Automatiseringsinstellingen`,showInSwitchbar:`Tonen in schakelbalk`,quickAccessSidebar:`Snelle toegang vanuit de zijbalk`,enabled:`Ingeschakeld`,enableAutomation:`Automatisering voor deze stekker inschakelen`,autoOn:`Automatisch aan`,autoOnDescription:`Inschakelen wanneer afdruk start`,autoOff:`Automatisch uit`,autoOffDescription:`Uitschakelen wanneer afdruk is voltooid (eenmalig)`,autoOffPersistent:`Ingeschakeld houden`,autoOffPersistentDescription:`Ingeschakeld blijven tussen afdrukken in plaats van eenmalig`,controlsPrinterPower:`Voedt de printer`,controlsPrinterPowerDescription:`Schakel dit uit als deze stekker alleen een accessoire voedt (filterventilator, verlichting). Anders wordt de printer als offline gemarkeerd wanneer je hem uitschakelt.`,autoOffAfterDrying:`Automatisch uitschakelen na drogen`,autoOffAfterDryingDescription:`Uitschakelen wanneer AMS-drogen is voltooid`,delayAfterDryingMinutes:`Droogvertraging (minuten)`,turnOffDelayMode:`Modus uitschakelvertraging`,time:`Tijd`,temp:`Temp`,delayMinutes:`Vertraging (minuten)`,tempThreshold:`Temperatuurdrempel (°C)`,tempThresholdDescription:`Schakelt uit wanneer de nozzle onder deze temperatuur is afgekoeld`,edit:`Bewerken`,deleteConfirm:`Weet je zeker dat je "{{name}}" wilt verwijderen? Dit kan niet ongedaan worden gemaakt.`,turnOnConfirm:`Weet je zeker dat je "{{name}}" wilt inschakelen?`,turnOffConfirm:`Weet je zeker dat je "{{name}}" wilt uitschakelen? Hierdoor wordt de stroom naar het aangesloten apparaat onderbroken.`,failedToTurn:`"{{name}}" {{action}} schakelen mislukt`,unknown:`Onbekend`,addTitle:`Slimme stekker toevoegen`,editTitle:`Slimme stekker bewerken`,stopScanning:`Scannen stoppen`,discoverTasmota:`Tasmota-apparaten zoeken`,foundDevices:`{{count}} apparaat/apparaten gevonden - klik om te selecteren:`,noDevicesFound:`Geen Tasmota-apparaten gevonden op je netwerk`,haNotConfigured:`Home Assistant is niet geconfigureerd. Stel dit in via`,haSettingsPath:`Instellingen → Netwerk → Home Assistant`,selectEntity:`Selecteer entiteit *`,ipAddress:`IP-adres *`,nameLabel:`Naam *`,username:`Gebruikersnaam`,password:`Wachtwoord`,authHint:`Laat leeg als je Tasmota-apparaat geen authenticatie vereist`,linkToPrinter:`Koppelen aan printer`,noPrinter:`Geen printer (alleen handmatige bediening)`,linkingDescription:`Koppelen maakt automatisch in-/uitschakelen mogelijk wanneer afdrukken starten/voltooien`,powerAlerts:`Vermogenswaarschuwingen`,alertAbove:`Waarschuwen indien boven (W)`,alertBelow:`Waarschuwen indien onder (W)`,alertDescription:`Ontvang een melding wanneer het stroomverbruik deze drempels overschrijdt. Laat leeg om die richting uit te schakelen.`,dailySchedule:`Dagelijks schema`,turnOnAt:`Inschakelen om`,turnOffAt:`Uitschakelen om`,scheduleDescription:`Schakel de stekker dagelijks automatisch op deze tijden in/uit. Laat leeg om die actie over te slaan.`,showOnPrinterCard:`Tonen op printerkaart`,displayOnPrinterCard:`Knop op printerkaart weergeven`,connectedResult:`Verbonden!`,deviceLabel:`Apparaat: {{name}} - `,stateLabel:`Status: {{state}}`,test:`Testen`,delete:`Verwijderen`,save:`Opslaan`,add:`Toevoegen`,cancel:`Annuleren`,failedToStartScan:`Scan starten mislukt`,nameRequired:`Naam is verplicht`,entityRequired:`Entiteit is verplicht voor Home Assistant-stekkers`,mqttTopicRequired:`Ten minste één MQTT-topic moet zijn geconfigureerd voor bewaking van vermogen, energie of status`,loadingEntities:`Entiteiten laden...`,loading:`Laden...`,failedToLoadEntities:`Entiteiten laden mislukt: {{error}}`,noEntitiesMatching:`Geen entiteiten gevonden die overeenkomen met "{{search}}"`,noEntitiesAvailable:`Geen entiteiten beschikbaar`,searchingEntities:`Alle entiteiten doorzoeken ({{count}} gevonden)`,showingEntities:`Toont switch, light, input_boolean ({{count}} beschikbaar)`,energyMonitoringOptional:`Energiemonitoring (optioneel)`,energyMonitoringHint:`Zoek en selecteer sensoren die vermogens-/energiegegevens leveren.`,powerSensorW:`Vermogenssensor (W)`,energyTodayKwh:`Energie vandaag (kWh)`,totalEnergyKwh:`Totale energie (kWh)`,noMatchingSensors:`Geen overeenkomende sensoren`,none:`Geen`,mqttNotConfigured:`MQTT-broker niet geconfigureerd. Stel het brokeradres in via`,mqttSettingsPath:`Instellingen → Netwerk → MQTT-publicatie`,mqttNotConfiguredSuffix:`(je hoeft publicatie niet in te schakelen; vul alleen de brokergegevens in).`,mqttMonitorOnlyDescription:`MQTT-stekkers ontvangen vermogens-/energiegegevens via een MQTT-abonnement. In-/uitschakelen is niet beschikbaar - gebruik je MQTT-broker of domoticasysteem.`,powerMonitoring:`Vermogensbewaking`,energyMonitoring:`Energiemonitoring`,stateMonitoring:`Statusbewaking`,optional:`optioneel`,topic:`Topic`,jsonPath:`JSON-pad`,multiplier:`Vermenigvuldigingsfactor`,onValue:`AAN-waarde`,mqttPowerHint:`JSON-pad haalt de waarde uit een JSON-payload (bijv. "power_l1"). Laat leeg als het topic ruwe numerieke waarden publiceert.
+Valore ON: la stringa esatta che significa "ON". Lascia vuoto per rilevamento auto (ON, true, 1).`,restControl:`Controllo`,restOnUrl:`URL accensione`,restOffUrl:`URL spegnimento`,restOnBody:`Corpo richiesta ON`,restOffBody:`Corpo richiesta OFF`,restMethod:`Metodo HTTP`,restHeaders:`Custom Headers (JSON)`,restStatusUrl:`URL stato`,restStatusPath:`Percorso JSON stato`,restStatusOnValue:`Valore ON`,restPowerUrl:`URL potenza`,restPowerPath:`Percorso JSON potenza`,restPowerMultiplier:`Moltiplicatore potenza`,restEnergyUrl:`URL energia`,restEnergyPath:`Percorso JSON energia (oggi)`,restEnergyTotalPath:`Percorso JSON energia (contatore totale)`,restEnergyTotalMultiplier:`Moltiplicatore contatore totale`,restEnergyTotalPathHint:`es. aenergy.total`,restEnergyTotalHint:`Molte prese — tutti gli Shelly fra queste — riportano solo un contatore cumulativo che non si azzera mai. Va qui, non nel campo sopra: letto come consumo di oggi non tornerebbe mai a zero a mezzanotte, e Ieri e Totale resterebbero vuoti. Bambuddy ricava Oggi e Ieri da questo valore, il che richiede uno o due giorni di letture. Uno Shelly riporta wattora, quindi usa un moltiplicatore di 0.001.`,restEnergyMultiplier:`Moltiplicatore energia`,restUrlRequired:`È richiesto almeno un URL (ON o OFF) per le prese REST`,restHeadersHint:`es. {"Authorization": "Bearer your-token"}`,restBodyHint:`es. ON, {"state": "on"}`,restStatusHint:`URL per recuperare lo stato attuale`,restPathHint:`es. state o data.power.status`,restPowerUrlHint:`URL separato per i dati di potenza (usa l'URL di stato se vuoto)`,restEnergyUrlHint:`URL separato per i dati di energia (usa l'URL di stato se vuoto)`,restEnergyHint:`Ogni valore può usare il proprio URL o ricadere sull'URL di stato. Usa i moltiplicatori per la conversione delle unità (es. 0.001 per convertire Wh in kWh).`,testConnection:`Testa connessione`,connectionSuccess:`Connessione riuscita`,noSwitchesInSwitchbar:`Nessun interruttore nella barra`,enableSwitchbarHint:`Abilita "Mostra nella barra interruttori" in Impostazioni > Smart Plugs`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`E-mail`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`Notifiche email tramite SMTP`,telegram:`Notifiche tramite bot Telegram`,discord:`Invia a un canale Discord tramite webhook`,ntfy:`Notifiche push gratuite e self-hostabili`,pushover:`Notifiche push semplici e affidabili`,callmebot:`Notifiche WhatsApp gratuite tramite CallMeBot`,webhook:`POST HTTP generico verso qualsiasi URL`,homeassistant:`Notifiche persistenti nella dashboard di Home Assistant`,bark:`Notifiche push iOS tramite Bark (auto-ospitabile)`},lastSuccess:`Ultimo: {{date}}`,error:`Errore`,printer:`Stampante:`,allPrinters:`Tutte le stampanti`,sendTestNotification:`Invia notifica di prova`,eventSettings:`Impostazioni eventi`,enabled:`Abilitato`,sendFromProvider:`Invia notifiche da questo provider`,printEvents:`Eventi di stampa`,printerStatus:`Stato stampante`,amsAlarms:`Allarmi AMS`,amsHtAlarms:`Allarmi AMS-HT`,printQueue:`Coda di stampa`,start:`Avvio`,plateCheck:`Controllo piatto`,complete:`Completato`,failed:`Fallito`,stopped:`Interrotto`,progress:`Avanzamento`,offline:`Offline`,lowFilament:`Filamento scarso`,maintenance:`Manutenzione`,amsHumidity:`Umidità AMS`,amsTemp:`Temp AMS`,amsDryingSuspended:`Asciugatura sospesa`,amsHtHumidity:`Umidità AMS-HT`,amsHtTemp:`Temp AMS-HT`,bedCooled:`Piatto raffreddato`,firstLayer:`Primo strato`,quiet:`Silenzioso`,digest:`Riepilogo {{time}}`,printStarted:`Stampa avviata`,plateNotEmpty:`Piatto non vuoto`,plateNotEmptyDescription:`Oggetti rilevati prima della stampa`,plateClearRequired:`Conferma piatto libero`,plateClearRequiredDescription:`Stampa finita, la coda attende conferma`,plateClear:`Piatto libero`,printCompleted:`Stampa completata`,bedCooledLabel:`Piatto raffreddato`,bedCooledDescription:`Piatto raffreddato sotto la soglia dopo la stampa`,firstLayerCompleteLabel:`Primo strato completato`,firstLayerCompleteDescription:`Notifica con foto al termine del primo strato`,missingSpoolAssignmentLabel:`Assegnazione bobina mancante`,billingChargeFailedLabel:`Errore di addebito`,billingChargeFailedDescription:`Notifica quando non è possibile registrare i costi di stampa`,missingSpoolAssignmentDescription:`Notifica quando una stampa parte e i vassoi richiesti non hanno una bobina assegnata`,printFailed:`Stampa fallita`,printStopped:`Stampa interrotta`,progressMilestones:`Traguardi di avanzamento`,progressMilestonesDescription:`Notifica al 25%, 50%, 75%`,printerOffline:`Stampante offline`,printerError:`Errore stampante`,aiFailureDetection:`Rilevamento guasti IA`,aiFailureDetectionDescription:`Notifica quando l'IA di Obico rileva un possibile guasto di stampa`,lowFilamentLabel:`Filamento scarso`,maintenanceDue:`Manutenzione necessaria`,maintenanceDueDescription:`Notifica quando è necessaria la manutenzione`,amsHumidityHigh:`Umidità AMS elevata`,amsHumidityHighDescription:`L'umidità dell'AMS standard supera la soglia`,amsTemperatureHigh:`Temperatura AMS elevata`,amsTemperatureHighDescription:`La temperatura dell'AMS standard supera la soglia`,amsDryingSuspendedTitle:`Asciugatura automatica sospesa`,amsDryingSuspendedDescription:`L'asciugatura automatica ha rinunciato a un'unità AMS perché l'umidità non è mai scesa sotto la soglia`,amsHtHumidityHigh:`Umidità AMS-HT elevata`,amsHtHumidityHighDescription:`L'umidità dell'AMS-HT supera la soglia`,amsHtTemperatureHigh:`Temperatura AMS-HT elevata`,amsHtTemperatureHighDescription:`La temperatura dell'AMS-HT supera la soglia`,inventoryAlerts:`Avvisi di inventario`,stockReorderAlert:`Avviso di riordino`,stockReorderAlertDescription:`Il SKU ha raggiunto il punto di riordino`,stockBreakAlert:`Avviso di esaurimento scorte`,stockBreakAlertDescription:`Le scorte si esauriranno prima dell'arrivo del rifornimento`,jobAdded:`Lavoro aggiunto`,jobAddedDescription:`Lavoro aggiunto alla coda`,jobAssigned:`Lavoro assegnato`,jobAssignedDescription:`Lavoro basato su modello assegnato alla stampante`,jobStarted:`Lavoro avviato`,jobStartedDescription:`Lavoro in coda avviato per la stampa`,jobWaiting:`Lavoro in attesa`,jobWaitingDescription:`Lavoro in attesa di filamento o stampante`,jobSkipped:`Lavoro saltato`,jobSkippedDescription:`Lavoro saltato (precedente fallito)`,jobFailed:`Lavoro fallito`,jobFailedDescription:`Avvio del lavoro fallito`,queueComplete:`Coda completata`,queueCompleteDescription:`Tutti i lavori in coda completati`,quietHours:`Ore silenziose`,noNotificationsDuring:`Nessuna notifica durante queste ore`,editProviderToChangeQuietHours:`Modifica il provider per cambiare le ore silenziose`,dailyDigest:`Riepilogo giornaliero`,batchNotifications:`Raggruppa le notifiche in un unico riepilogo giornaliero`,sendAt:`Invia alle {{time}}`,editProviderToChangeDigestTime:`Modifica il provider per cambiare l'orario del riepilogo`,edit:`Modifica`,deleteProvider:`Elimina provider di notifica`,deleteConfirm:`Sei sicuro di voler eliminare "{{name}}"? Questa azione non può essere annullata.`,delete:`Elimina`,addTitle:`Aggiungi provider di notifica`,editTitle:`Modifica provider di notifica`,nameLabel:`Nome *`,namePlaceholder:`Le mie notifiche`,providerTypeLabel:`Tipo di provider *`,configuration:`Configurazione`,testConfiguration:`Testa configurazione`,printerFilter:`Filtro stampante`,onlyFromPrinter:`Invia notifiche solo per eventi da questa stampante`,quietHoursDnd:`Ore silenziose (Non disturbare)`,quietStart:`Inizio`,quietEnd:`Fine`,dailyDigestLabel:`Riepilogo giornaliero`,sendDigestAt:`Invia riepilogo alle`,digestCollected:`Gli eventi verranno raccolti e inviati come riepilogo unico a quest'ora`,notificationEvents:`Eventi di notifica`,progressPercent:`(25%, 50%, 75%)`,bedCooledAfterPrint:`(dopo il completamento della stampa)`,haSensorAlert:`Avviso sensore stampante`,haSensorAlertDescription:`(un sensore Home Assistant collegato richiede attenzione)`,locationHaSensorAlert:`Avviso sensore di posizione`,locationHaSensorAlertDescription:`(un sensore Home Assistant collegato a una posizione di archiviazione richiede attenzione)`,eventPriority:{sectionTitle:`Priorità ntfy`,helpNtfy:`Scegli una priorità per ogni evento abilitato. ntfy le usa per intensificare gli avvisi (suono, visibilità, comportamento push). I livelli non impostati qui usano l'impostazione predefinita del server ntfy.`,min:`Min.`,low:`Bassa`,default:`Predefinita`,high:`Alta`,urgent:`Urgente`},cancel:`Annulla`,save:`Salva`,add:`Aggiungi`,nameRequired:`Il nome è obbligatorio`,fieldRequired:`{{field}} è obbligatorio`,haDataInvalid:`Il campo Data deve essere un oggetto JSON valido, ad es. {"priority": "high", "ttl": 0}`,phoneNumber:`Numero di telefono`,apiKey:`Chiave API`,serverUrl:`URL del server`,topic:`Argomento`,authToken:`Token di autenticazione`,userKey:`Chiave utente`,appToken:`Token applicazione`,priority:`Priorità`,pushoverRetry:`Ripetizione emergenza (s)`,pushoverExpire:`Scadenza emergenza (s)`,botToken:`Token del bot`,chatId:`ID chat`,telegramThreadId:`ID argomento forum`,telegramThreadIdHelp:`Opzionale. Invia in un singolo argomento di un gruppo forum: l'ultimo numero nel link dell'argomento (t.me/c/.../25). Lascia vuoto per l'argomento Generale.`,telegramThreadIdInvalid:`L'ID argomento forum deve essere un numero.`,smtpServer:`Server SMTP`,smtpPort:`Porta SMTP`,security:`Sicurezza`,authentication:`Autenticazione`,username:`Nome utente`,password:`Password`,fromEmail:`Email mittente`,toEmail:`Email destinatario`,webhookUrl:`URL webhook`,payloadFormat:`Formato payload`,authorization:`Autorizzazione`,titleFieldName:`Nome campo titolo`,messageFieldName:`Nome campo messaggio`,editTemplate:`Modifica modello: {{name}}`,titleLabel:`Titolo`,bodyLabel:`Corpo`,titlePlaceholder:`Titolo della notifica...`,bodyPlaceholder:`Corpo della notifica...`,availableVariables:`Variabili disponibili`,clickToInsert:`Clicca per inserire alla posizione del cursore nel corpo`,livePreview:`Anteprima live`,hide:`Nascondi`,show:`Mostra`,loadingPreview:`Caricamento anteprima...`,enterTemplateContent:`Inserisci il contenuto del modello per vedere l'anteprima`,titlePreview:`Titolo:`,bodyPreview:`Corpo:`,resetToDefault:`Ripristina predefinito`,titleRequired:`Il titolo è obbligatorio`,bodyRequired:`Il corpo è obbligatorio`,notificationLog:`Registro notifiche`,showFailedOnly:`Solo fallite`,last24Hours:`Ultime 24 ore`,last7Days:`Ultimi 7 giorni`,last30Days:`Ultimi 30 giorni`,last90Days:`Ultimi 90 giorni`,justNow:`Proprio ora`,noFailedNotifications:`Nessuna notifica fallita`,noNotificationsLogged:`Nessuna notifica registrata`,unknownProvider:`Provider sconosciuto`,logTitle:`Titolo`,logMessage:`Messaggio`,logError:`Errore`,logProvider:`Provider: {{type}}`,logTime:`Ora: {{time}}`,refresh:`Aggiorna`,clearOld:`Cancella vecchie`,statsSummary:`Ultimi {{days}} giorni:`,statsNotifications:`notifiche`,statsSent:`{{count}} inviate`,statsFailed:`{{count}} fallite`,eventTypes:{print_start:`Stampa avviata`,print_complete:`Stampa completata`,print_failed:`Stampa fallita`,print_stopped:`Stampa interrotta`,print_progress:`Avanzamento`,printer_offline:`Stampante offline`,printer_error:`Errore stampante`,filament_low:`Filamento scarso`,maintenance_due:`Manutenzione necessaria`,test:`Prova`},userEmail:{title:`Notifiche`,emailNotifications:`Notifiche via e-mail`,emailNotificationsDesc:`Ricevi notifiche via e-mail per i tuoi lavori di stampa. Le e-mail vengono inviate tramite le impostazioni SMTP configurate nell'autenticazione avanzata.`,sendingTo:`Le notifiche verranno inviate a`,noEmailWarning:`Il tuo account non ha un indirizzo e-mail. Contatta un amministratore per aggiungerne uno.`,printJobNotifications:`Notifiche lavori di stampa`,printJobNotificationsDesc:`Scegli quali eventi attivano le notifiche e-mail per i lavori di stampa che invii.`,printJobStarts:`Inizio lavoro di stampa`,printJobStartsDesc:`Ricevi una notifica quando il tuo lavoro di stampa inizia.`,printJobFinishes:`Fine lavoro di stampa`,printJobFinishesDesc:`Ricevi una notifica quando il tuo lavoro di stampa si completa correttamente.`,printErrors:`Errori di stampa`,printErrorsDesc:`Ricevi una notifica quando il tuo lavoro di stampa fallisce o incontra un errore.`,printJobStops:`Lavoro di stampa interrotto`,printJobStopsDesc:`Ricevi una notifica quando il tuo lavoro di stampa viene annullato o interrotto.`,saveSuccess:`Preferenze di notifica salvate.`,saveError:`Impossibile salvare le preferenze di notifica.`}},richTextEditor:{bold:`Grassetto`,italic:`Corsivo`,underline:`Sottolineato`,bulletList:`Elenco puntato`,numberedList:`Elenco numerato`,alignLeft:`Allinea a sinistra`,alignCenter:`Allinea al centro`,alignRight:`Allinea a destra`,addLink:`Aggiungi link`,removeLink:`Rimuovi link`},externalLinks:{title:`Link della barra laterale`,sidebarLayout:`Barra laterale`,sidebarLayoutDescription:`Mostra o nascondi le pagine integrate, aggiungi link esterni e trascina gli elementi per riordinare la navigazione laterale.`,systemPages:`Pagine Bambuddy`,externalLinks:`Link esterni`,visibleInSidebar:`Visibile nella barra laterale`,hiddenFromSidebar:`Nascosto nella barra laterale`,requiredInSidebar:`Obbligatorio nella barra laterale`,hidePage:`Nascondi pagina`,showPage:`Mostra pagina`,settingsCannotBeHidden:`Le impostazioni non possono essere nascoste`,noLinksConfigured:`Nessun link esterno configurato`,deleteLink:`Elimina link`,removeCustomIcon:`Rimuovi icona personalizzata`,openInNewTab:`Apri in nuova scheda`,placeholders:{linkName:`Il mio link`}},keyboardShortcuts:{title:`Scorciatoie da tastiera`,navigation:`Navigazione`,archivesSection:`Archivi`,kProfilesSection:`Profili K`,generalSection:`Generale`,shortcuts:{goToPrinters:`Vai a Stampanti`,goToArchives:`Vai ad Archivi`,goToQueue:`Vai a Coda`,goToStats:`Vai a Statistiche`,goToProfiles:`Vai a Profili cloud`,goToSettings:`Vai a Impostazioni`,focusSearch:`Vai alla ricerca`,openUploadModal:`Apri finestra di caricamento`,clearSelection:`Cancella selezione / deseleziona input`,contextMenu:`Menu contestuale sulle schede`,refreshProfiles:`Aggiorna profili`,newProfile:`Nuovo profilo`,exitSelectionMode:`Esci dalla modalità selezione`,showHelp:`Mostra questa guida`},footer:`Premi Esc o clicca fuori per chiudere`},notificationLog:{title:`Registro notifiche`,events:{printStarted:`Stampa avviata`,printComplete:`Stampa completata`,printFailed:`Stampa fallita`,printStopped:`Stampa interrotta`,progress:`Avanzamento`,printerOffline:`Stampante offline`,printerError:`Errore stampante`,lowFilament:`Filamento in esaurimento`,maintenanceDue:`Manutenzione in scadenza`,test:`Test`},timeAgo:{justNow:`Adesso`,minutesAgo:`{{minutes}} min fa`,hoursAgo:`{{hours}} ore fa`}},restoreBackup:{title:`Ripristina backup`,restoring:`Ripristino...`,restoreComplete:`Ripristino completato`,restoreFailed:`Ripristino fallito`,importSettings:`Importa impostazioni da un file di backup`,pleaseWait:`Attendere il ripristino dei dati`,clickToSelect:`Clicca per selezionare il file di backup (.json o .zip)`,howDuplicateHandling:`Come funziona la gestione dei duplicati:`,categories:{printers:`Stampanti`,smartPlugs:`Prese smart`,notificationProviders:`Provider di notifica`,filaments:`Filamenti`,archives:`Archivi`,pendingUploads:`Caricamenti in sospeso`,settingsTemplates:`Impostazioni e modelli`},matchingInfo:{printers:`abbinati per numero di serie`,smartPlugs:`abbinati per indirizzo IP`,notificationProviders:`abbinati per nome`,filaments:`abbinati per nome + tipo + marca`,archives:`abbinati per hash del contenuto`,pendingUploads:`abbinati per nome file`,settingsTemplates:`sempre sovrascritti`},replaceExisting:`Sostituisci dati esistenti`,keepExisting:`Mantieni dati esistenti`,replaceDescription:`Sovrascrivi gli elementi già esistenti con i dati del backup`,keepDescription:`Ripristina solo gli elementi che non esistono già`,caution:`Attenzione:`,cautionText:`La sovrascrittura sostituirà le configurazioni attuali con i dati del backup. I codici di accesso delle stampanti non vengono mai sovrascritti per sicurezza.`,itemsRestored:`Elementi ripristinati`,itemsSkipped:`Elementi saltati`,restored:`Ripristinati`,skipped:`Saltati (già esistenti)`,filesLabel:`File (3MF, miniature, ecc.)`,newApiKeysGenerated:`Nuove chiavi API generate`,newApiKeysWarning:`Queste chiavi vengono mostrate una sola volta. Copiale adesso!`,processingBackup:`Elaborazione file di backup...`,noDataFound:`Nessun dato trovato da ripristinare nel file di backup.`,failedToRestore:`Impossibile ripristinare il backup. Verificare il formato del file.`},backupExport:{title:`Esporta backup`,selectData:`Seleziona i dati da includere`,selectAll:`Seleziona tutto`,selectNone:`Deseleziona tutto`,categoryDescriptions:{settings:`Lingua, tema, preferenze di aggiornamento`,notifications:`ntfy, Pushover, Discord, ecc.`,templates:`Modelli di messaggi personalizzati`,smartPlugs:`Configurazioni prese Tasmota`,externalLinks:`Link della barra laterale a servizi esterni`,printers:`Info stampanti (codici di accesso esclusi)`,plateDetection:`Immagini di riferimento piatto vuoto`,filaments:`Tipi di filamento e costi`,maintenance:`Programmi di manutenzione personalizzati`,archives:`Tutti i dati di stampa + file (3MF, miniature, foto)`,projects:`Progetti, elementi BOM e allegati`,pendingUploads:`Caricamenti della stampante virtuale in attesa di revisione`,apiKeys:`Chiavi API webhook (nuove chiavi generate all'importazione)`},requiresPrinters:`Richiede la selezione di Stampanti`,zipFileWarning:`Verrà creato un file ZIP.`,zipFileDescription:`Include tutti i file 3MF, miniature, timelapse e foto. Potrebbe richiedere tempo e produrre un file di grandi dimensioni.`,includeAccessCodes:`Includi codici di accesso`,includeAccessCodesDescription:`Per il trasferimento su un'altra macchina`,includeAccessCodesWarning:`I codici di accesso saranno inclusi in testo semplice. Mantieni sicuro questo file di backup!`,categoriesSelected:`{{selectedCount}} categorie selezionate`},pendingUploads:{placeholders:{notes:`Aggiungi note su questa stampa...`},discardUpload:`Scarta caricamento`,archiveAllUploads:`Archivia tutti i caricamenti`,discardAllUploads:`Scarta tutti i caricamenti`,archive:`Archivia`,timeAgo:{justNow:`Adesso`,minutesAgo:`{{minutes}} min fa`,hoursAgo:`{{hours}} ore fa`,daysAgo:`{{days}} giorni fa`}},apiBrowser:{placeholders:{requestBody:`Corpo della richiesta JSON...`,searchEndpoints:`Cerca endpoint...`}},configureAmsSlot:{title:`Configura Slot AMS`,slotConfigured:`Slot configurato!`,configuringSlot:`Configurazione slot:`,slotLabel:`{{ams}} – Slot {{slot}}`,searchPresets:`Cerca preset...`,colorPlaceholder:`Nome colore o hex (es. marrone, FF8800)`,clearCustomColor:`Cancella colore personalizzato`,noCloudPresets:`Nessun preset cloud. Accedi a Bambu Cloud per sincronizzare.`,noPresetsAvailable:`Nessun preset disponibile. Accedi a Bambu Cloud o importa profili locali.`,noMatchingPresets:`Nessun preset corrispondente trovato.`,custom:`Personalizzato`,builtin:`Integrato`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Impostazioni inviate alla stampante`,filamentProfile:`Profilo filamento`,kProfileLabel:`Profilo K (Pressure Advance)`,filteringFor:`Filtrando per: {{material}}`,noKProfile:`Nessun profilo K (usa predefinito 0.020)`,noMatchingKProfiles:`Nessun profilo K corrispondente. Verrà usato K=0.020 predefinito.`,otherKProfiles:`Altri profili K su questa stampante`,selectFilamentFirst:`Seleziona prima un profilo filamento`,kFromCalibration:`K={{value}} dalla calibrazione stampante`,customColorLabel:`Colore personalizzato (opzionale)`,presetColors:`Colori {{name}}:`,showLessColors:`Mostra meno colori`,showMoreColors:`Mostra più colori`,clear:`Cancella`,hexLabel:`Hex – #{{hex}}`,resetting:`Ripristino...`,resetSlot:`Ripristina slot`,cancel:`Annulla`,configuring:`Configurazione...`,configureSlot:`Configura slot`},githubBackup:{title:`Backup Git`,history:`Cronologia`,downloadBackup:`Scarica backup`,restoreBackup:`Ripristina backup`,noBackupsYet:`Nessun backup ancora`},emailSettings:{placeholders:{fromName:`Bambuddy`}},tagManagement:{searchTags:`Cerca tag...`,renameTag:`Rinomina tag`,deleteTag:`Elimina tag`},notificationTemplates:{placeholders:{title:`Titolo notifica...`,body:`Corpo notifica...`}},batchTag:{placeholders:{newTag:`Inserisci nuovo tag...`}},photoGallery:{deletePhoto:`Elimina foto`},filamentHoverCard:{copySpoolUuid:`Copia UUID bobina`},kProfilesView:{hasNote:`Ha una nota`,copyProfile:`Copia profilo`},layout:{openMenu:`Apri menu`,noPermissionSystemInfo:`Non hai il permesso di visualizzare le informazioni di sistema`},dashboard:{dragToReorder:`Trascina per riordinare`,hideWidget:`Nascondi widget`},notificationProviderCard:{deleteNotificationProvider:`Elimina provider di notifica`},fileManagerModal:{closeFileManager:`Chiudi gestore file`,sortFiles:`Ordina file`,goToParentFolder:`Vai alla cartella superiore`,threeView:`Vista 3D`},embeddedCameraViewer:{refreshStream:`Aggiorna stream`,close:`Chiudi`,zoomOut:`Rimpicciolisci`,resetZoom:`Reimposta zoom`,zoomIn:`Ingrandisci`,dragToResize:`Trascina per ridimensionare`},timelapseViewer:{skipBack5s:`Indietro 5s`,skipForward5s:`Avanti 5s`},notificationProviders:{descriptions:{email:`Notifiche email via SMTP`,telegram:`Notifiche tramite bot Telegram`,discord:`Invia a canale Discord tramite webhook`,ntfy:`Notifiche push gratuite e self-hostabili`,pushover:`Notifiche push semplici e affidabili`,callmebot:`Notifiche WhatsApp gratuite tramite CallMeBot`,webhook:`POST HTTP generico a qualsiasi URL`}},logViewer:{searchPlaceholder:`Cerca messaggio o nome logger...`,noLogEntries:`Nessuna voce di log trovata`},switchbarPopover:{noSwitchesInSwitchbar:`Nessun interruttore nella barra`},projectPageModal:{placeholders:{title:`Titolo`,designer:`Designer`,license:`Licenza`,description:`Inserisci descrizione...`,profileTitle:`Titolo profilo`,profileDescription:`Descrizione profilo...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`In attesa`,justNow:`Proprio ora`,now:`Ora`,minsAgo:`{{count}}m fa`,inMins:`tra {{count}}m`,hoursAgo:`{{count}}h fa`,inHours:`tra {{count}}h`,daysAgo:`{{count}}g fa`,inDays:`tra {{count}}g`},spoolbuddy:{nav:{dashboard:`Dashboard`,ams:`AMS`,inventory:`Inventario`,writeTag:`Scrivi`,settings:`Impostazioni`},status:{nfcReady:`NFC pronto`,nfcOff:`NFC spento`,offline:`Offline`,online:`Online`,noPrinters:`Nessuna stampante`,deviceOffline:`Dispositivo offline`,waitingConnection:`In attesa della connessione...`,systemReady:`Sistema pronto`,status:`Stato`},dashboard:{readyToScan:`Pronto per la scansione`,idleMessage:`Posiziona una bobina sulla bilancia per identificarla`,nfcHint:`Il tag NFC verrà letto automaticamente`,device:`Dispositivo`,syncWeight:`Sincronizza peso`,weightSynced:`Sincronizzato!`,unknownTag:`Tag sconosciuto`,newTag:`Nuovo tag rilevato`,onScale:`sulla bilancia`,linkSpool:`Collega a bobina`,linkTagTitle:`Collega tag a bobina`,linkTag:`Collega tag`,selectSpool:`Seleziona una bobina da collegare a questo tag:`,noUntagged:`Nessuna bobina senza tag trovata`,tagDetected:`Tag rilevato`,noTag:`Nessun tag`,tagId:`Etichetta`,grossWeight:`Peso lordo`,spoolSize:`Dimensione bobina`,close:`Chiudi`,currentSpool:`Bobina attuale`,plateReady:`Piatto pronto: {{name}}`,plateReadyLabel:`Piatti da liberare`,plateClearAction:`Libera`,plateClearedToast:`Piatto contrassegnato come liberato`,plateClearFailed:`Impossibile contrassegnare il piatto come liberato`},modal:{spoolDetected:`Bobina rilevata`,assignToAms:`Assegna all'AMS`,syncWeight:`Sincronizza peso`,weightSynced:`Sincronizzato!`,syncing:`Sincronizzazione...`,newTagDetected:`Nuovo tag rilevato`,addToInventory:`Aggiungi all'inventario`,assignToAmsTitle:`Assegna all'AMS`,selectSlot:`Seleziona uno slot`,assign:`Assegna`,assigning:`Assegnazione...`,assignSuccess:`Assegnato!`,assignPendingInsert:`Assegnato. Lo slot verrà configurato all'inserimento della bobina.`,assignError:`Impossibile assegnare la bobina. Riprovare.`,noPrinterSelected:`Seleziona una stampante...`,noAmsDetected:`Nessun AMS rilevato su questa stampante`,slot:`Slot`},weight:{noReading:`Nessuna lettura`,stable:`Stabile`,measuring:`Misurazione...`,tare:`Tara`,calibrate:`Calibra`},spool:{remaining:`Rimanente`,material:`Materiale`,brand:`Marca`,color:`Colore`,coreWeight:`Nucleo`,labelWeight:`Etichetta`,scaleWeight:`Bilancia`,netWeight:`Netto`,lastUsed:`Ultimo utilizzo`,unknownColor:`Colore sconosciuto`},ams:{noData:`Nessun AMS rilevato`,connectAms:`Collega un AMS per vedere gli slot`,noPrinter:`Nessuna stampante selezionata`,selectPrinter:`Seleziona una stampante dalla barra superiore`,printerDisconnected:`Stampante disconnessa`,humidity:`Umidità`,level:`Livello`,active:`Attivo`,slot:`Slot`,empty:`Vuoto`},inventory:{search:`Cerca bobine...`,empty:`Nessuna bobina nell'inventario`,noResults:`Nessuna bobina corrispondente`,spools:`bobine`,addSpool:`Aggiungi bobina`},settings:{tabDevice:`Dispositivo`,tabDisplay:`Display`,tabScale:`Bilancia`,tabUpdates:`Aggiornamenti`,nfcReader:`Lettore NFC`,type:`Tipo`,connection:`Connessione`,notConnected:`N/D`,deviceInfo:`Info dispositivo`,hostname:`Host`,uptime:`Tempo di attività`,brightness:`Luminosità`,saved:`Salvato`,noBacklight:`Nessuna retroilluminazione DSI rilevata. Il controllo luminosità richiede un display DSI.`,screenBlank:`Timeout spegnimento schermo`,screenBlankDesc:`Lo schermo si spegne dopo inattività. Tocca per riattivare.`,displayNote:`La luminosità viene applicata come filtro software.`,scaleCalibration:`Calibrazione bilancia`,currentWeight:`Peso attuale`,tareOffset:`Tara`,calFactor:`Fattore`,knownWeight:`Peso noto`,calStep1:`Rimuovere tutto dalla bilancia e premere Imposta zero.`,calStep2:`Posizionare il peso noto sulla bilancia.`,setZero:`Imposta zero`,calibrateNow:`Calibra`,calibrated:`Calibrato`,tareSet:`Comando tara inviato. In attesa del dispositivo...`,tareComplete:`Tara completata!`,tareTimedOut:`Tempo scaduto per la tara — il demone SpoolBuddy è in esecuzione?`,tareFailed:`Invio comando tara fallito`,zeroSet:`Punto zero impostato. Posizionare il peso noto sulla bilancia.`,calibrationDone:`Calibrazione completata!`,calibrationFailed:`Calibrazione fallita`,lastCalibrated:`Ultima calibrazione`,stable:`Stabile`,settling:`Stabilizzazione...`,firmware:`Firmware`,scale:`Bilancia`,noDevice:`Nessun dispositivo SpoolBuddy trovato`,daemonVersion:`Versione daemon`,currentVersion:`Attuale`,versionPending:`In attesa del daemon...`,checking:`Verifica...`,checkUpdates:`Verifica aggiornamenti`,updateAvailable:`Aggiornamento disponibile`,updateInstructions:`Aggiorna via SSH: esegui lo script di installazione SpoolBuddy.`,upToDate:`Aggiornato`,includeBeta:`Includi versioni beta`,systemConfig:`Backend & autenticazione`,backendUrl:`URL backend Bambuddy`,apiToken:`Token API`,apiTokenPlaceholder:`Inserisci token API`,saveConfig:`Salva configurazione`,systemQueued:`Configurazione in coda.`,systemFieldsRequired:`L'URL del backend è obbligatorio.`,nfcDiagnostic:`Diagnostica NFC`,scaleDiagnostic:`Diagnostica bilancia`,readTagDiagnostic:`Diagnostica lettura tag`,testNfc:`Test lettore`,testScale:`Test precisione`,testReadTag:`Leggi tag`},writeTag:{tabExisting:`Bobina esistente`,tabNew:`Nuova bobina`,tabReplace:`Sostituisci tag`,searchPlaceholder:`Cerca per materiale, colore, marca...`,noUntaggedSpools:`Nessuna bobina senza tag`,noTaggedSpools:`Nessuna bobina con tag`,selectSpool:`Seleziona una bobina, poi posiziona un NTAG sul lettore`,placeTag:`Posiziona un NTAG sul lettore`,tagReady:`Tag rilevato — pronto per la scrittura`,writeTag:`Scrivi tag`,replaceTag:`Sostituisci tag`,writing:`Scrittura tag...`,waiting:`In attesa di SpoolBuddy...`,writeSuccess:`Tag scritto con successo!`,writeFailed:`Scrittura fallita`,queueFailed:`Impossibile accodare il comando di scrittura`,tryAgain:`Riprova`,cancel:`Annulla`,replaceWarning:`Il vecchio tag verrà scollegato. Il nuovo tag lo sostituirà.`,deviceOffline:`SpoolBuddy è offline`,material:`Materiale`,colorName:`Nome colore`,color:`Colore`,brand:`Marca`,weight:`Peso (g)`,createSpool:`Crea bobina`,creating:`Creazione...`,spoolCreated:`Bobina creata! Pronto per la scrittura.`,createFailed:`Impossibile creare la bobina`,incompleteDataWarning:`Tag scritto con dati Spoolman incompleti`},quickMenu:{printerPower:`Alimentazione stampante`,systemControls:`Sistema`,restartDaemon:`Riavvia daemon`,restartBrowser:`Riavvia browser`,reboot:`Riavvia`,shutdown:`Spegni`,swipeToClose:`Scorri verso il basso per chiudere`,confirmTitle:`Conferma`,confirmShutdown:`Sei sicuro di voler spegnere lo SpoolBuddy? Avrai bisogno di accesso fisico per riaccenderlo.`,confirmReboot:`Sei sicuro di voler riavviare lo SpoolBuddy?`,confirmRestartDaemon:`Riavviare il daemon SpoolBuddy? NFC e bilancia saranno temporaneamente non disponibili.`,confirmRestartBrowser:`Riavviare il browser kiosk? Lo schermo diventerà brevemente nero.`,confirm:`Conferma`,confirmPlugOn:`Accendere {{name}}?`,confirmPlugOff:`Spegnere {{name}}?`,turnOn:`Accendi`,turnOff:`Spegni`}},diagnostic:{modalTitle:`Diagnostica connessione — {{name}}`,running:`Diagnostica in corso...`,runningElapsed:`Diagnostica in corso... ({{elapsed}}s)`,waitingForReportHint:`In attesa che la stampante pubblichi un report di stato — può richiedere fino a {{max}} secondi.`,runFailed:`Impossibile eseguire la diagnostica: {{error}}`,retry:`Esegui di nuovo`,runButton:`Esegui diagnostica`,sectionTitle:`Diagnostica connessione`,sectionDescription:`Verifica perché una stampante non si connette o non stampa — raggiungibilità delle porte, modalità sviluppatore LAN, modalità di rete Docker e credenziali.`,noPrinters:`Nessuna stampante configurata.`,overall:{ok:`Nessun problema rilevato — la connessione della stampante sembra a posto.`,warnings:`La stampante dovrebbe funzionare, ma alcuni aspetti richiedono attenzione.`,problems:`Sono stati rilevati problemi che spiegano perché la stampante non si connette o non stampa.`},check:{port_mqtt:{title:`Porta di controllo (MQTT 8883)`,pass:`Raggiungibile — la stampante accetta connessioni di controllo.`,fail:`La porta 8883 non è raggiungibile. La stampante è spenta, ha un altro indirizzo IP oppure un firewall la blocca. Verifica l'IP della stampante e che nulla blocchi la porta 8883.`},port_ftps:{title:`Porta trasferimento file (FTPS 990)`,pass:`Raggiungibile — l'invio dei file di stampa funzionerà.`,warn:`La porta 990 non è raggiungibile. Il monitoraggio potrebbe ancora funzionare, ma l'invio delle stampe alla stampante fallirà. Assicurati che la porta 990 non sia bloccata.`,warn_no_tls:`La porta 990 è aperta, ma il servizio file della stampante non completa l'handshake TLS. I file di stampa, le anteprime e i timelapse non possono essere scaricati, quindi gli archivi restano vuoti. Riavvia la stampante — sbloccare la porta non serve.`},external_storage:{title:`Memorizza file inviati su archiviazione esterna (passo 4 dell'installazione)`,pass:`La stampante segnala che questa opzione è attiva — i file inviati saranno memorizzati sulla scheda SD e gli archivi avranno miniature e metadati dello slicer.`,fail:`La stampante segnala che questa opzione è disattivata. Abilita "Memorizza file inviati su archiviazione esterna" — nei firmware recenti (P2S 01.02 / Bambu Studio 2.6+) l'interruttore si trova nelle Impostazioni di stampa della stampante; nelle versioni precedenti è nella scheda Dispositivo di Bambu Studio / OrcaSlicer. Senza questa opzione, ogni stampa archiviata è priva di miniatura e di metadati dello slicer.`,skip:`Non verificato — è necessaria una connessione MQTT attiva. Negli slicer più vecchi dove questa impostazione esiste solo nello slicer, la stampante non la segnala, quindi questo controllo passa anche se l'opzione è disattivata — verifica manualmente il passo 4 dell'installazione.`,skip_unsupported_model:`Questo modello ha uno slot SD ma nessun modo per attivare l'opzione — il firmware attuale della serie P1 non mostra l'interruttore in Bambu Studio e la stampante non ha uno schermo. Non c'è nulla da correggere qui; alle stampe archiviate potrebbero mancare miniature e metadati dello slicer finché Bambu Lab non aggiungerà il supporto via firmware.`,fail_no_media:`L'opzione è attiva, ma la stampante non rileva né scheda né chiavetta nel suo slot, quindi i file inviati non hanno dove andare. Inseriscine una e stampa di nuovo — fino ad allora ogni stampa archiviata sarà priva di miniatura e metadati dello slicer.`,warn_internal_storage:`L'opzione è attiva ed è presente una memoria, ma l'ultima stampa è comunque finita nella memoria interna della stampante, che Bambuddy non può leggere. Sulla serie H2, sulla P2S e sulla X2D il pulsante «Stampa» di Bambu Studio invia sempre lì, a prescindere da questa opzione. Le stampe vengono archiviate con nome e tempi, ma senza miniatura né metadati dello slicer. Per archivi completi, avvia le stampe da Bambuddy oppure elabora in OrcaSlicer, oppure in Bambu Studio usa «Invia» con «Esterna» e avvia la stampa dopo.`,warn_internal_history:`L'opzione è attiva e la memoria è presente, ma l'ultima stampa è partita da un file già presente sulla stampante: una ristampa dal suo schermo, un avvio da Handy o un file inviato prima. Quella libreria si trova nella memoria interna, che Bambuddy non può leggere, e nessuna impostazione lo cambia, perché per quella stampa non è stato inviato nulla. Resta archiviata con nome e tempi, ma senza miniatura né metadati dello slicer. Per archivi completi, avvia le stampe da Bambuddy o inviale dallo slicer.`},port_rtsps:{title:`Porta fotocamera ({{protocol}} {{port}})`,pass:`Raggiungibile — lo streaming della fotocamera funzionerà.`,warn:`La porta {{port}} non è raggiungibile. La visualizzazione live della fotocamera non funzionerà. Questo non influisce sulla stampa.`},macos_local_network:{title:`Autorizzazione « Rete locale » di macOS`,pass:`macOS consente a Bambuddy di raggiungere la rete locale.`,warn_unsigned:`Il Python che esegue Bambuddy non ha una firma del codice, quindi macOS non ha nulla a cui associare l’autorizzazione « Rete locale » e scarta in silenzio ogni connessione alla stampante, senza errori e senza richiesta. Esegui lo script di aggiornamento di Bambuddy (install/update_macos.sh), che lo firma, poi riavvia Bambuddy. Interprete: {{executable}}`,warn_permission:`Se la stampante è accesa e raggiungibile a questo indirizzo, apri Impostazioni di Sistema > Privacy e sicurezza > Rete locale e verifica che il Python di Bambuddy sia abilitato. In caso contrario macOS scarta le connessioni locali in silenzio, e un aggiornamento di Python può lasciare indietro la vecchia autorizzazione.`},network_mode:{title:`Modalità di rete del container`,genericRuntime:`un container`,pass:`In esecuzione in {{runtime}} con rete host.`,warn:`Bambuddy è in esecuzione in {{runtime}} con rete bridge. Il rilevamento delle stampanti e la stampante virtuale richiedono la modalità di rete host — ricrea il container con rete host ("network_mode: host" in docker-compose, "--network=host" per Podman).`,skip:`Non in esecuzione in un container — non applicabile.`,skip_unknown:`Bambuddy è in esecuzione in {{runtime}}, ma non è stato possibile determinarne la modalità di rete. Se il rilevamento delle stampanti o la stampante virtuale non funzionano, ricrea il container con rete host.`,skip_system_container:`Bambuddy è in esecuzione in un container di sistema {{runtime}}, presente sulla LAN come una macchina virtuale — non applicabile.`},subnet:{title:`Sottorete`,pass:`La stampante e Bambuddy sono nella stessa sottorete.`,warn:`La stampante ({{printer_ip}}) e Bambuddy ({{host_ip}}) sono in sottoreti diverse. Potrebbero non raggiungersi a meno che non sia configurato il routing tra le sottoreti.`,skip:`Impossibile determinare la sottorete — ignorato.`},mqtt_auth:{title:`Credenziali stampante`,pass:`La stampante ha accettato la connessione.`,fail:`La stampante è raggiungibile ma Bambuddy non è connesso ad essa. Il codice di accesso o il numero di serie è molto probabilmente errato — il codice di accesso cambia ogni volta che la modalità Solo LAN o la modalità sviluppatore viene attivata/disattivata, quindi ricopialo dallo schermo della stampante. Una stampante in fase di riavvio, o che ha già raggiunto il limite di connessioni simultanee, appare allo stesso modo.`,fail_auth_rejected:`La stampante ha rifiutato le credenziali di Bambuddy. Il codice di accesso o il numero di serie è errato — il codice di accesso cambia ogni volta che la modalità Solo LAN o la modalità sviluppatore viene attivata/disattivata. Ricopialo dallo schermo della stampante e salvalo nelle impostazioni della stampante.`,skip:`Non verificato — impossibile raggiungere la stampante.`},developer_mode:{title:`Modalità sviluppatore LAN`,pass:`La modalità sviluppatore è attivata.`,fail:`La modalità sviluppatore è DISATTIVATA sulla stampante. Attivala nelle impostazioni LAN della stampante — e conferma con OK. Senza di essa le stampe non verranno avviate.`,skip:`Impossibile verificare — richiede una connessione attiva alla stampante.`},printer_publishing:{title:`La stampante pubblica lo stato`,pass:`La stampante sta pubblicando aggiornamenti di stato — AMS, filamenti e profili K saranno correttamente replicati nello slicer.`,fail:`Il broker MQTT ha accettato la connessione ma la stampante non ha pubblicato alcun report di stato. È quasi sempre un numero di serie errato o con maiuscole/minuscole sbagliate — il topic device/<serial>/report distingue tra maiuscole e minuscole. Confronta il numero di serie nelle impostazioni della stampante con quello mostrato sullo schermo del dispositivo.`,skip:`Impossibile verificare — richiede una connessione attiva alla stampante.`}}},systemHealth:{sectionTitle:`Stato del sistema`,sectionDescription:`Analizza i log recenti alla ricerca di problemi noti che di solito puoi risolvere da solo, prima che diventino un ticket di assistenza.`,rescan:`Analizza di nuovo`,clean:`Nessun problema noto trovato nelle ultime {{times}} voci di log.`,logUnavailable:`La registrazione su file è disattivata, quindi i log non possono essere analizzati. Attiva la registrazione su file per usare questo controllo.`,learnMore:`Come risolvere`,fixLabel:`Soluzione:`,occurrences:`Visto {{times}}× — ultima volta alle {{lastSeen}}`,category:{layer8:`Puoi risolverlo tu`,environment:`Ambiente`,bug:`Segnalalo, per favore`},signature:{"ftp-auth-rejected":{name:`La stampante ha rifiutato il codice di accesso`,cause:`La stampante ha rifiutato l'accesso per il trasferimento file. Il codice di accesso è errato oppure è cambiato dopo aver attivato la Modalità Sviluppatore.`,fix:`Ricopia il codice di accesso dallo schermo della stampante (impostazioni LAN) e aggiornalo nelle impostazioni della stampante in Bambuddy.`},"ftp-connection-timeout":{name:`Timeout della connessione di trasferimento file`,cause:`Bambuddy non è riuscito a raggiungere la porta di trasferimento file della stampante (FTPS 990). La porta è bloccata, oppure la stampante è spenta o in un'altra sottorete.`,fix:`Assicurati che nulla blocchi la porta 990 tra Bambuddy e la stampante e che entrambi siano sulla stessa rete.`},"ftp-ssl-error":{name:`Handshake sicuro del trasferimento file non riuscito`,cause:`Il servizio file della stampante ha risposto sulla porta 990 senza TLS. Il suo server file si è bloccato: è un guasto della stampante, non un problema di firewall o firmware.`,fix:`Riavvia la stampante. Fino ad allora non è possibile scaricare file di stampa, copertine e timelapse; la stampa in sé non è interessata.`},"bambu-cloud-captcha":{name:`Bambu Cloud richiede un CAPTCHA`,cause:`Il sistema antiabuso di Bambu sta verificando questa rete, quindi nessun accesso a Bambu Cloud può andare a buon fine. Dipende dall'indirizzo IP pubblico, non dal tuo account né da questa installazione.`,fix:`Attendi: di solito si risolve entro qualche ora e i tentativi ripetuti lo prolungano. Nel frattempo accedi con un token di accesso preso da una sessione del browser.`},"mqtt-connection-flapping":{name:`La connessione alla stampante cade di continuo`,cause:`La connessione di controllo (MQTT 8883) si disconnette e si riconnette ripetutamente, di solito per una rete debole o una porta parzialmente bloccata.`,fix:`Controlla il segnale Wi-Fi vicino alla stampante, preferisci una connessione cablata e assicurati che la porta 8883 sia raggiungibile in modo affidabile.`},"camera-connection-refused":{name:`Flusso della telecamera non raggiungibile`,cause:`Non è stato possibile raggiungere la telecamera dal vivo sulla porta RTSPS 322. La porta è bloccata, oppure la telecamera o la visione dal vivo via LAN è disattivata sulla stampante.`,fix:`Attiva la telecamera e la visione dal vivo via LAN sulla stampante e assicurati che la porta 322 non sia bloccata. Questo non influisce sulla stampa.`},"database-locked":{name:`Conflitti di scrittura nel database`,cause:`Il database SQLite presenta errori "database is locked" sotto carico, comune quando si usano più stampanti contemporaneamente.`,fix:`Passa Bambuddy a un database PostgreSQL esterno. Consulta la guida PostgreSQL nella documentazione.`}}},vpDiagnostic:{title:`Controllo configurazione — {{name}}`,runButton:`Esegui controllo configurazione`,running:`Controllo configurazione in corso...`,runFailed:`Impossibile eseguire il controllo della configurazione: {{error}}`,retry:`Esegui di nuovo`,overall:{ok:`Tutti i controlli superati — questa stampante virtuale è configurata correttamente.`,warnings:`La stampante virtuale dovrebbe funzionare, ma alcuni aspetti richiedono attenzione.`,problems:`Sono stati trovati problemi che spiegano perché lo slicer non riesce a vedere o usare questa stampante virtuale.`},check:{enabled:{title:`Stampante virtuale abilitata`,fail:`Questa stampante virtuale è spenta. Attivala per renderla rilevabile.`},running:{title:`Servizi in esecuzione`,fail:`La stampante virtuale è abilitata ma i suoi servizi non sono in esecuzione. Controlla il log di Bambuddy — di solito li ferma un conflitto di IP di binding o un errore di permessi.`},bind_interface:{title:`Interfaccia di rete di binding`,fail:`L'interfaccia di binding non è impostata o non esiste più su questo host. Scegli un'interfaccia attuale nel menu "Interfaccia di binding".`},access_code:{title:`Codice di accesso impostato`,fail:`Nessun codice di accesso impostato. Allo slicer deve essere fornito lo stesso codice di accesso di 8 caratteri impostato qui.`},target_printer:{title:`Stampante di destinazione`,fail:`Nessuna stampante di destinazione selezionata. La modalità proxy richiede una stampante reale a cui inoltrare.`,warn:`La stampante di destinazione è offline in questo momento — l'inoltro riprenderà quando si riconnetterà.`},port_ftps:{title:`Servizio di caricamento file (porta {{port}})`,fail:`Nulla è in ascolto sulla porta {{port}} dell'IP di binding, quindi lo slicer non può caricare i file. La causa abituale è un conflitto di porta su questa interfaccia.`},port_mqtt:{title:`Servizio di controllo (porta {{port}})`,fail:`Nulla è in ascolto sulla porta {{port}} dell'IP di binding, quindi lo slicer non può connettersi o mostrare lo stato.`},port_bind:{title:`Servizio di rilevamento (porta {{port}})`,fail:`Nulla è in ascolto sulla porta {{port}} dell'IP di binding, quindi l'handshake di rilevamento dello slicer fallisce.`},privileged_ports:{title:`Binding sulle porte privilegiate`,fail:`La porta {{port}} è sotto 1024 e questo servizio non è autorizzato ad associarla: per questo sopra non risulta nulla in ascolto. Aggiungi AmbientCapabilities=CAP_NET_BIND_SERVICE in /etc/systemd/system/bambuddy.service e riavvia, oppure esegui "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))". Con Docker aggiungi cap_add: [NET_BIND_SERVICE].`},certificate:{title:`Certificato TLS`,pass:`Certificato pronto. Assicurati che il certificato CA di Bambuddy (sopra) sia importato nell'archivio attendibile del tuo slicer.`,fail:`Il certificato TLS per questa stampante virtuale è mancante. Verifica che la directory dei dati di Bambuddy sia scrivibile.`}}},bugReport:{logHealthSummary:`Trovati problemi noti nei tuoi log`,logHealthIntro:`I log recenti corrispondono a problemi noti. Controlla le soluzioni qui sotto: risolverle potrebbe sistemare il problema senza una segnalazione di bug. Puoi comunque inviare una segnalazione qui sotto.`,title:`Segnala un bug`,description:`Descrizione`,descriptionPlaceholder:`Cosa è andato storto? Descrivi il problema...`,email:`Email (opzionale)`,emailPlaceholder:`tua@email.it`,emailPrivacy:`Se fornita, la tua email sarà inclusa in una sezione compressa dell'issue GitHub per permettere al manutentore di contattarti.`,screenshot:`Schermata`,uploadOrPaste:`Carica, incolla o trascina un'immagine`,dataCollectedSummary:`Quali dati sono inclusi nel report?`,dataIncluded:`Inclusi:`,dataIncludedList:`Versione app, OS, architettura, versione Python, statistiche database (solo conteggi), modelli stampante, numero ugelli, versioni firmware, stato connessione, stato integrazioni (Spoolman, MQTT, HA), impostazioni non sensibili, conteggio interfacce di rete, dettagli Docker, versioni dipendenze.`,dataNeverIncluded:`Mai inclusi:`,dataNeverIncludedList:`Nomi stampanti, numeri di serie, codici di accesso, password, indirizzi IP, indirizzi email, chiavi API, token, URL webhook, nomi host o nomi utente.`,submit:`Invia`,startLogging:`Avvia registrazione debug`,stepEnableLogging:`Registrazione debug attivata`,stepReproduce:`Riproduci il problema ora`,stepStopLogging:`Ferma & invia rapporto`,stopAndSubmit:`Ferma & Invia`,maxDuration:`Arresto automatico dopo {{minutes}} min`,stoppingLogs:`Raccolta log & invio...`,submitting:`Invio segnalazione bug...`,submittingStepConnection:`Controlli di connettività delle stampanti in corso`,submittingStepVirtualPrinters:`Controlli di configurazione delle stampanti virtuali in corso`,submittingStepLogScan:`Analisi dei log recenti per problemi noti`,submittingStepSubmit:`Invio del report a GitHub`,submitSuccess:`Segnalazione bug inviata con successo!`,submitFailed:`Impossibile inviare la segnalazione bug`,diagnosticChecking:`Verifica delle connessioni delle stampanti...`,diagnosticHealthy:`Verifica della connessione superata — nessun problema rilevato sulle tue stampanti.`,diagnosticSummary:`{{problems}} stampanti su {{total}} hanno problemi di connessione`,diagnosticIntro:`Una o più stampanti hanno un problema di connessione che potrebbe essere la causa del tuo problema. Espandi una stampante qui sotto per vedere la soluzione — risolverla potrebbe sistemare il problema senza una segnalazione di bug. Puoi comunque inviare una segnalazione qui sotto.`,thankYou:`Grazie!`,submitted:`La tua segnalazione bug è stata inviata.`,viewIssue:`Vedi issue`,closeKeepsRecording:`Puoi chiudere questo pannello mentre riproduci il problema: la registrazione continua e riaprendolo tornerai qui.`,resumeRecording:`Segnalazione in registrazione — {{elapsed}}. Fai clic per completare.`,resumeReport:`Riprendi segnalazione`,unexpectedError:`Si è verificato un errore imprevisto`},failureDetection:{title:`Rilevamento guasti con IA`,description:`Monitora le stampe tramite un'API ML Obico auto-ospitata e agisce automaticamente sui guasti rilevati.`,mlUrl:`URL API ML Obico`,mlUrlHint:`URL base del tuo container Obico ml_api auto-ospitato (es. http://192.168.1.10:3333).`,mlToken:`Token API ML (facoltativo)`,mlTokenPlaceholder:`Lascia vuoto se il server funziona senza ML_API_TOKEN`,mlTokenHint:`Deve corrispondere alla variabile di ambiente ML_API_TOKEN del tuo container Obico ml_api. Lascia vuoto se il container funziona senza token.`,test:`Prova`,testSuccess:`API ML raggiungibile e funzionante.`,testSuccessTokenUnknown:`API ML raggiungibile e funzionante. Non è stato possibile verificare il token.`,testFailed:`Impossibile raggiungere l'API ML.`,sensitivity:`Sensibilità`,sensitivityLow:`Bassa (meno falsi positivi)`,sensitivityMedium:`Media (bilanciata)`,sensitivityHigh:`Alta (rilevamento precoce, più falsi positivi)`,sensitivityHint:`Regola le soglie di confidenza che attivano avvisi e guasti.`,action:`Azione al guasto rilevato`,actionNotify:`Solo notifica`,actionPause:`Metti in pausa`,actionPauseOff:`Pausa e stacca corrente`,pollInterval:`Intervallo di controllo (secondi)`,pollIntervalHint:`Frequenza di controllo di ogni stampante durante la stampa. Minimo 5s, massimo 120s.`,externalUrlMissing:`URL esterno non impostato.`,externalUrlHint:`L'API ML recupera l'istantanea della telecamera tramite URL. Imposta l'URL esterno nelle impostazioni generali in modo che il container API ML possa raggiungere Bambuddy.`,perPrinterTitle:`Stampanti monitorate`,perPrinterHint:`Scegli quali stampanti il servizio di rilevamento deve monitorare.`,monitorAll:`Monitora tutte le stampanti connesse`,statusTitle:`Stato`,serviceRunning:`Servizio in esecuzione`,thresholds:`Soglie bassa / alta`,activePrinters:`Stampe attive`,noActivePrints:`Nessuna stampa in corso.`,historyTitle:`Rilevamenti recenti`,noHistory:`Nessun rilevamento finora.`},makerworld:{title:`MakerWorld`,description:`Incolla un URL di un modello MakerWorld per importarlo e stamparlo direttamente da Bambuddy — senza passare dall'app Bambu Handy.`,pasteUrlHeader:`Importa da MakerWorld`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… o incolla qualsiasi link MakerWorld`,resolveButton:`Risolvi`,signInRequiredTitle:`Accesso Bambu Cloud richiesto per scaricare`,signInRequiredBody:`Puoi consultare i dettagli del modello in modo anonimo, ma MakerWorld richiede un account Bambu Cloud per scaricare i file 3MF.`,signInExpiredTitle:`Accesso a Bambu Cloud scaduto`,signInExpiredBody:`Hai ancora effettuato l'accesso a Bambuddy, ma Bambu Lab non accetta più il token salvato, quindi i download non riusciranno. Accedi di nuovo a Bambu Cloud.`,openCloudSettings:`Apri impostazioni Cloud`,untitledModel:`Modello senza titolo`,byCreator:`di {{name}}`,downloadsCount:`{{count}} download`,licensePrefix:`Licenza`,alreadyImported:`Già nella libreria`,openOnMakerworld:`Apri su MakerWorld`,alreadyInLibrary:`Questo modello è già nella tua libreria — lo trovi in Gestione file → MakerWorld`,importSuccess:`{{filename}} importato — salvato in Gestione file → MakerWorld`,platesHeader:`Piatti ({{count}})`,plateDefaultName:`Piatto {{n}}`,materialCount:`{{count}} filamenti`,amsRequired:`AMS richiesto`,slicedFor:`Sezionato per {{printer}}`,alsoCompatible:`Anche contrassegnato come compatibile: {{printers}}`,importToLibrary:`Salva`,sliceIn:`Salva e affetta in {{slicer}}`,disclaimer:`L'integrazione MakerWorld utilizza endpoint API documentati dalla community. Bambuddy non è affiliato né approvato da MakerWorld o Bambu Lab.`,lastImportSuccess:`Importato nella tua libreria`,lastImportAlreadyInLibrary:`Già nella tua libreria`,viewInLibrary:`Visualizza in Gestione file`,openInBambuStudio:`Apri in Bambu Studio`,openInOrcaSlicer:`Apri in OrcaSlicer`,importTo:`Importa in Gestione file`,recentImportsHeader:`Importazioni recenti`,phaseResolving:`Risoluzione`,phaseDownloading:`Download`,folderAuto:`MakerWorld (predefinita)`,importAll:`Importa tutto`,importAllProgress:`Importazione {{current}}/{{total}}`,openGallery:`Apri galleria immagini`,galleryPrev:`Immagine precedente`,galleryNext:`Immagine successiva`,deleteImport:`Rimuovi dalla libreria`,importDeleting:`Rimozione…`,importDeleted:`Rimosso dalla libreria`,confirmDelete:`Rimuovere {{filename}} dalla libreria? Il file locale verrà eliminato, ma il piatto può essere re-importato da MakerWorld.`,errors:{resolveFailed:`Impossibile risolvere questo URL MakerWorld.`,downloadFailed:`Download non riuscito. Riprova.`,deleteFailed:`Impossibile rimuovere il file dalla libreria.`}},gcodeViewer:{filamentSlot:`Filamento {{n}}`,loading:`Lettura del percorso…`,loadFailed:`Impossibile caricare il G-code di questo file.`,showTravel:`Spostamenti a vuoto`,topLayer:`Strato superiore`,bottomLayer:`Strato inferiore`,noSource:`Nessun file da visualizzare è stato indicato.`,view:{filament:`Filamento`,feature:`Elemento`,height:`Altezza`,width:`Larghezza`},feature:{wall:`Pareti`,sparseInfill:`Riempimento rado`,solidInfill:`Riempimento solido`,bridge:`Ponte / sbalzo`,support:`Supporto`,skirt:`Skirt / brim`,gapFill:`Riempimento vuoti`,ironing:`Stiratura`,primeTower:`Torre di spurgo`},back:`Indietro`,backToArchives:`Torna agli archivi di stampa`,backToFiles:`Torna al gestore file`,plates:`Piastre`,plateN:`Piastra {{n}}`},libraryTrash:{title:`Cestino`,headerButton:`Cestino`,headerTooltip:`Visualizza i file spostati nel cestino`,backToFiles:`Torna al gestore file`,subtitleAdmin:`I file eliminati restano qui per {{days}} giorni, poi vengono rimossi automaticamente. Questa vista mostra il cestino di tutti gli utenti.`,subtitleUser:`I file eliminati restano qui per {{days}} giorni, poi vengono rimossi automaticamente.`,loading:`Caricamento del cestino…`,loadError:`Impossibile caricare il cestino.`,empty:`Il cestino è vuoto.`,summary:`{{count}} file · {{size}}`,emptyTrash:`Svuota cestino`,restore:`Ripristina`,purgeNow:`Elimina ora`,autoPurgeIn:`Eliminazione automatica tra {{when}}`,days:`giorni`,retentionLabel:`Elimina automaticamente dopo`,selectAll:`Seleziona tutto`,selectOne:`Seleziona {{filename}}`,selectionCount:`{{count}} selezionati`,bulkRestore:`Ripristina selezionati`,bulkPurge:`Elimina selezionati`,col:{filename:`File`,folder:`Cartella`,size:`Dimensione`,deleted:`Spostato nel cestino`,autoPurge:`Eliminazione auto.`,owner:`Proprietario`,actions:`Azioni`},confirm:{purgeTitle:`Eliminare definitivamente?`,purgeBody:`{{filename}} verrà eliminato dal disco e non potrà essere ripristinato.`,emptyTitle:`Svuotare il cestino?`,emptyBody:`Tutti i {{count}} file verranno eliminati dal disco. Azione non annullabile.`,bulkPurgeTitle:`Eliminare definitivamente i file selezionati?`,bulkPurgeBody:`I {{count}} file selezionati verranno eliminati dal disco e non potranno essere ripristinati.`,cta:`Elimina definitivamente`},toast:{restored:`File ripristinato.`,restoreFailed:`Impossibile ripristinare il file.`,purged:`File eliminato definitivamente.`,purgeFailed:`Impossibile eliminare il file.`,emptied:`{{count}} file eliminati dal cestino.`,emptyFailed:`Impossibile svuotare il cestino.`,retentionSaved:`Eliminazione automatica impostata su {{days}} giorni.`,retentionFailed:`Impossibile salvare l'impostazione di conservazione.`,bulkRestored:`{{count}} file ripristinati.`,bulkPurged:`{{count}} file eliminati.`}},libraryPurge:{title:`Elimina file vecchi`,headerButton:`Elimina vecchi`,headerTooltip:`Sposta in blocco i file vecchi nel cestino`,description:`I file più vecchi della soglia verranno spostati nel cestino. Le cartelle esterne vengono ignorate. Puoi ripristinarli dal cestino prima dell'eliminazione automatica.`,ageLabel:`Sposta i file più vecchi di`,days:`giorni`,includeNeverPrinted:`Includi i file mai stampati`,effectsTitle:`Cosa succede quando fai clic su Pulisci`,effect1:`I file corrispondenti vengono spostati nel cestino — non sono ancora eliminati dal disco.`,effect2:`Puoi ripristinarli dal cestino in qualsiasi momento fino alla scadenza del periodo di conservazione.`,effect3:`Dopo il periodo di conservazione, lo spazzino del cestino li rimuove definitivamente.`,effect4:`I file in cartelle esterne (collegate) vengono saltati — Bambuddy non elimina mai dati che non possiede.`,previewLoading:`Verifica quanti file corrispondono…`,previewFailed:`Impossibile mostrare l'anteprima.`,previewSummary:`{{count}} file · {{size}} verrebbero spostati nel cestino`,andMore:`…e altri {{count}}`,warning:`I file vengono eliminati in modo soft — puoi ripristinarli dal cestino fino alla scadenza del periodo di conservazione.`,confirmCta:`Sposta {{count}} nel cestino`,purging:`Spostamento nel cestino…`,toast:{success:`{{count}} file spostati nel cestino.`,failed:`Impossibile eliminare i file.`}},libraryAutoPurge:{enableLabel:`Elimina automaticamente i file vecchi`,enableDescription:`Esegue l'eliminazione amministrativa una volta al giorno. I file finiscono prima nel cestino — non vengono eliminati immediatamente.`,ageLabel:`Elimina automaticamente i file più vecchi di`,ageDescription:`Minimo 7 giorni, massimo 10 anni. Usa la stessa regola di età del pulsante Elimina manuale.`,days:`giorni`,includeNeverPrinted:`Includi i file mai stampati`,saveFailed:`Impossibile salvare le impostazioni di eliminazione automatica.`},archivePurge:{headerButton:`Elimina vecchi`,headerTooltip:`Eliminazione massiva vecchi archivi`,title:`Elimina vecchi archivi`,description:`Cancella la vecchia cronologia di stampa. Ogni archivio invecchia in base alla sua ultima stampa completata — ristampare azzera l'età, quindi il lavoro attivo non viene mai eliminato.`,ageLabel:`Elimina archivi non stampati negli ultimi`,days:`giorni`,effectsTitle:`Cosa succede quando fai clic su Pulisci`,effect1:`Ogni archivio corrispondente viene nascosto dagli elenchi e i suoi file vengono rimossi dal disco (3MF, miniatura, timelapse, 3MF sorgente, F3D, foto).`,effect2:`La riga dell'archivio rimane nel database, così le Quick Stats conservano il contributo di filamento, tempo, costo ed energia — come il comportamento predefinito dell'eliminazione singola.`,effect3:`Spunta «Rimuovi anche dalle statistiche» qui sotto per eliminare anche il contributo dalle Quick Stats (equivalente all'opzione dell'eliminazione singola). Questo percorso è irreversibile.`,effect4:`Ristampare un archivio azzera il suo conteggio dell'età, quindi gli archivi attivi sono al sicuro.`,purgeStatsLabel:`Rimuovi anche dalle statistiche`,purgeStatsHint:`Rimuove gli archivi selezionati dalle Quick Stats (filamento, tempo, costo, energia). Senza questa opzione le Quick Stats conservano ogni contributo e solo i file vengono cancellati.`,previewLoading:`Verifica del numero di archivi corrispondenti…`,previewFailed:`Impossibile visualizzare l'anteprima della pulizia.`,previewSummary:`{{count}} archivi · {{size}} verrebbero rimossi`,andMore:`…e altri {{count}}`,warning:`I file vengono rimossi dal disco e non possono essere ripristinati. Scarica o aggiungi ai preferiti tutto ciò che vuoi conservare prima di continuare.`,confirmCta:`Rimuovi {{count}} archivio(i)`,purging:`Rimozione…`,toast:{success:`{{count}} archivio(i) rimosso.`,failed:`Impossibile eliminare gli archivi.`}},archiveAutoPurge:{enableLabel:`Elimina auto. vecchi archivi`,enableDescription:`Una volta al giorno nasconde dagli elenchi gli archivi non stampati entro la soglia e rimuove i loro file dal disco. Ristampare azzera il timer.`,ageLabel:`Eliminazione auto. di archivi non stampati negli ultimi`,ageDescription:`Minimo 7 giorni, massimo 10 anni. Basato sull'ultima stampa completata — ristampare azzera l'età. Rimuove 3MF, miniatura, timelapse, 3MF sorgente, F3D e foto.`,days:`giorni`,purgeStatsLabel:`Rimuovi anche dalle statistiche`,purgeStatsDescription:`Quando abilitato, lo sweeper giornaliero elimina anche il contributo di ogni archivio purgato dalle Quick Stats (filamento, tempo, costo, energia). Disabilitato per impostazione predefinita — le Quick Stats mantengono il contributo e solo i file vengono cancellati.`,runNow:`Elimina archivi ora`,saveFailed:`Impossibile salvare le impostazioni di pulizia automatica.`},cameraTokens:{scope:{camera_stream:`Flusso della telecamera`,camwall:`Muro telecamere`,overlay:`Overlay di streaming`},title:`Token API telecamera`,navTitle:`Token API telecamera`,description:`Token di lunga durata per incorporare il flusso della telecamera in Home Assistant, Frigate, schermi in modalità chiosco o qualsiasi altro strumento che richieda un indirizzo stabile. L'ambito si sceglie alla creazione; un token può essere revocato in qualsiasi momento.`,loading:`Caricamento…`,confirmRevoke:{title:`Revocare questo token?`,body:`Qualsiasi dispositivo che usa "{{name}}" perderà l'accesso immediatamente. Non può essere annullato.`,cancel:`Annulla`,confirm:`Revoca`},create:{scopeLabel:`Ambito`,hintCameraStream:`Un token del flusso della telecamera può recuperare soltanto flussi e istantanee. Usalo per Home Assistant, Frigate o qualsiasi cosa incorpori una singola telecamera.`,hintCamWall:`Un token Muro telecamere apre /camwall su uno schermo senza login. Vede nome e stato di ogni stampante e i relativi flussi della telecamera. Non vede nomi di file, indirizzi o codici di accesso.`,hintOverlay:`Un token Overlay di streaming apre /overlay/{printerId} su uno schermo senza login, per OBS o qualsiasi diretta streaming. Vede il flusso della telecamera di una stampante e il suo stato di stampa in tempo reale, incluso il nome del file mostrato sullo schermo. Non vede indirizzi o codici di accesso.`,title:`Crea nuovo token`,nameLabel:`Nome token`,namePlaceholder:`es. Home Assistant`,daysLabel:`Giorni alla scadenza`,submit:`Crea`,hint:`Durata massima 365 giorni. Il valore del token viene mostrato solo alla creazione — copialo ora.`},created:{camWallUrlTitle:`Indirizzo del muro telecamere per questo schermo`,camWallUrlHint:`Apri questo indirizzo sullo schermo. Chiunque possa leggerlo può guardare il muro, quindi trattalo come una chiave: revoca il token per escludere lo schermo.`,overlayUrlTitle:`Indirizzo overlay per OBS`,overlayUrlHint:`Aggiungi questo come Sorgente browser in OBS. Cambia il numero in /overlay/1 con il numero della tua stampante (dall'indirizzo nella pagina Stampanti). Chiunque possa leggere l'indirizzo può guardare lo streaming, quindi trattalo come una chiave: revoca il token per interrompere l'accesso.`,title:`Token creato – copialo ora`,warning:`Questa è l'unica volta in cui questo token sarà visibile. Dopo la chiusura di questa finestra non potrai più visualizzarlo.`,copy:`Copia`,dismiss:`L'ho salvato`},list:{scope:`Ambito`,myTitle:`I miei token`,allTitle:`Tutti gli utenti (vista admin)`,empty:`Nessun token ancora.`,name:`Nome`,owner:`Proprietario`,prefix:`Prefisso`,created:`Creato`,expires:`Scade`,lastUsed:`Ultimo uso`,revoke:`Revoca`,expired:`Scaduto`},toast:{created:`Token creato`,createFailed:`Creazione token fallita`,revoked:`Token revocato`,revokeFailed:`Revoca token fallita`,loadFailed:`Caricamento token fallito`,copied:`Copiato negli appunti`,copyFailed:`Copia non riuscita – seleziona e copia manualmente`}},forecast:{title:`Previsione scorte`,noSpools:`Nessuna bobina attiva trovata. Aggiungi bobine al tuo inventario per vedere i dati di previsione.`,noUsageData:`Nessun dato di utilizzo disponibile — impossibile proiettare la timeline delle scorte.`,sku:`SKU`,material:`Materiale`,stock:`Scorte`,dailyRate:`Tasso`,daysLeft:`Giorni rimanenti`,emptyBy:`Esaurimento previsto`,reorderBy:`Riordinare entro`,actions:`Azioni`,trend:`Tendenza`,estimated:`Stim.`,noData:`Nessun dato`,timeframe:`Periodo`,chartTitle:`Stock proiettato — Top 5 materiali`,dashedLinesROP:`Linee tratteggiate = punti di riordino`,stockLevel:`Livello scorte`,reorderPoint:`Punto di riordino`,safetyMargin:`Margine di sicurezza`,trendLegend:`Tendenza (basata su storico, livello servizio 95%)`,estimatedLegend:`Stimata (delta peso)`,noDataLegend:`Nessun dato`,ropLabel:`PR`,ssLabel:`SS`,safetyStockLegend:`Scorta di sicurezza`,stockArrivalLegend:`Arrivo merce`,stockoutLegend:`Esaurimento scorte`,alertCount_one:`{{count}} avviso`,alertCount_other:`{{count}} avvisi`,order:`Ordina`,globalLeadTime:`Lead time globale`,globalLeadTimeHint:`Lead time globale minimo — usato nel calcolo del punto di riordino per tutti gli SKU`,save:`Salva`,cancel:`Annulla`,settingsSaved:`Impostazioni salvate`,failedSaveSettings:`Impossibile salvare le impostazioni`,globalLeadTimeSaved:`Lead time globale salvato`,skuLeadTimeOverride:`Override lead time SKU`,skuLeadTimeHint:`0 = usa lead time globale. Imposta >0 per sovrascrivere per questo SKU.`,safetyMarginLabel:`Margine di sicurezza`,effectiveLeadTime:`Lead time effettivo`,effectiveLeadTimeHint:`max(globale {{global}}g, SKU {{sku}}g)`,reorderPointHint:`d̄ × LT + safety margin — ordina quando le scorte raggiungono questo livello`,safetyMarginHint:`Scorta di sicurezza statistica (z=1,65 × σ × √LT) + buffer definito dall'utente`,safetyMarginHintDays:`Buffer aggiunto sulla scorta di sicurezza statistica.{{approx}}`,safetyMarginHintDaysApprox:` ≈ {{g}}g al tasso attuale.`,safetyMarginHintG:`Buffer di peso fisso aggiunto sulla scorta di sicurezza statistica.{{approx}}`,safetyMarginHintGApprox:` ≈ {{days}}g al tasso attuale.`,individualSpools:`Bobine singole`,labelWeight:`Etichetta`,spoolCount_one:`{{count}} bobina`,spoolCount_other:`{{count}} bobine`,stockBreakRisk:`Rischio di rottura scorte`,stockBreakBefore:`Rottura scorte prima del rifornimento`,stockBreakDetail:`{{days}}g rimanenti, lead time {{lt}}g.`,reorderNow:`Riordina ora`,reorderTriggerPassed:`La data di attivazione {{date}} è passata.`,shoppingList:`Lista della spesa`,shoppingListItems_one:`({{count}} articolo)`,shoppingListItems_other:`({{count}} articoli)`,shoppingListEmpty:`La lista della spesa è vuota. Clicca sull'icona del carrello in qualsiasi riga per aggiungere articoli.`,addToCart:`Aggiungi alla lista della spesa`,alertsSnoozed:`Silenzia avvisi per questo SKU`,alertsEnabled:`Riattiva avvisi per questo SKU`,addedToCart:`Aggiunto alla lista della spesa`,failedAddItem:`Impossibile aggiungere l'articolo`,listView:`Lista`,logisticsView:`Logistica`,qty:`Qtà`,weight:`Peso`,leadTime:`Lead time`,expectedRestock:`Rifornimento previsto`,status:`Stato`,note:`Nota`,pending:`In attesa`,purchased:`Acquistato`,received:`Ricevuto`,markPurchased:`Segna come acquistato`,markReceived:`Segna come ricevuto — aggiunge bobine all'inventario`,resetToPending:`Ripristina in attesa`,remove:`Rimuovi`,clearAll:`Cancella tutto`,downloadCsv:`CSV`,addToCartTitle:`Aggiungi alla lista della spesa`,byQuantity:`Per quantità`,byDuration:`Per durata`,numberOfSpools:`Numero di bobine`,lastHowManyDays:`Per quanti giorni deve durare?`,noUsageQty:`Nessun dato di utilizzo — quantità impostata a 1.`,noteOptional:`Nota (opzionale)`,notePlaceholder:`es. per il progetto X, urgente…`,addNSpools_one:`Aggiungi {{count}} bobina`,addNSpools_other:`Aggiungi {{count}} bobine`,onArrival:`All'arrivo`,stockBreakIn:`Rottura scorte tra {{days}}g.`,stockRunsOutBefore:`Le scorte si esauriscono prima dello scadere del lead time di {{lt}}g.`,atRate:`A {{rate}}g/giorno hai bisogno di`,moreSpools_one:`{{count}} bobina in più`,moreSpools_other:`{{count}} bobine in più`,bridgeGap:`per colmare il divario.`,noReadAccess:`Non hai il permesso di visualizzare le previsioni di inventario.`,noWriteAccess:`Non hai il permesso di modificare le impostazioni di previsione.`}}},nl:{translation:{nav:{printers:`Printers`,archives:`Archieven`,queue:`Afdrukwachtrij`,stats:`Statistieken`,profiles:`Profielen`,maintenance:`Onderhoud`,projects:`Projecten`,finance:`Financiën`,inventory:`Filament`,files:`Bestandsbeheer`,makerworld:`MakerWorld`,notifications:`Meldingen`,settings:`Instellingen`,system:`Systeem`,collapseSidebar:`Zijbalk inklappen`,expandSidebar:`Zijbalk uitklappen`,update:`Bijwerken`,updateAvailable:`Update beschikbaar: v{{version}}`,updateAvailableBanner:`Versie {{version}} is beschikbaar!`,viewUpdate:`Update bekijken`,viewOnGithub:`Bekijken op GitHub`,keyboardShortcuts:`Sneltoetsen (?)`,switchToLight:`Overschakelen naar lichte modus`,switchToDark:`Overschakelen naar donkere modus`,switchToSystem:`Overschakelen naar systeemmodus`,smartSwitches:`Slimme schakelaars`,logout:`Uitloggen`,installApp:`App installeren`,installAppSuccess:`Bambuddy is geïnstalleerd`},common:{plusNMore:`+{{count}} meer`,save:`Opslaan`,saving:`Opslaan...`,cancel:`Annuleren`,delete:`Verwijderen`,edit:`Bewerken`,add:`Toevoegen`,close:`Sluiten`,confirm:`Bevestigen`,loading:`Laden...`,error:`Fout`,errorLoading:`Fout bij laden van gegevens`,retry:`Opnieuw proberen`,success:`Geslaagd`,warning:`Waarschuwing`,enabled:`Ingeschakeld`,disabled:`Uitgeschakeld`,yes:`Ja`,no:`Nee`,on:`Aan`,off:`Uit`,all:`Alle`,none:`Geen`,search:`Zoeken`,filter:`Filteren`,sort:`Sorteren`,refresh:`Vernieuwen`,download:`Downloaden`,upload:`Uploaden`,uploading:`Uploaden...`,uploadFailed:`Upload mislukt`,actions:`Acties`,status:`Status`,name:`Naam`,user:`Gebruiker`,description:`Beschrijving`,date:`Datum`,time:`Tijd`,hours:`uren`,minutes:`minuten`,seconds:`seconden`,days:`dagen`,enable:`Inschakelen`,disable:`Uitschakelen`,permissions:`Machtigingen`,noPrinters:`Geen printers geconfigureerd`,noData:`Geen gegevens beschikbaar`,linkNotFound:`Link niet gevonden`,required:`Verplicht`,optional:`Optioneel`,dismiss:`Negeren`,apply:`Toepassen`,reset:`Resetten`,export:`Exporteren`,import:`Importeren`,clear:`Wissen`,selectAll:`Alles selecteren`,deselectAll:`Alles deselecteren`,noChange:`— Geen wijziging —`,unchanged:`Ongewijzigd`,unassigned:`Niet toegewezen`,unknown:`Onbekend`,unknownError:`Onbekende fout`,today:`Vandaag`,tomorrow:`Morgen`,asap:`Zo snel mogelijk`,overdue:`Te laat`,now:`Nu`,collapse:`Inklappen`,expand:`Uitklappen`,previous:`Vorige`,next:`Volgende`,viewArchive:`Archief bekijken`,viewInFileManager:`Bekijken in Bestandsbeheer`,addedBy:`Toegevoegd door {{username}}`,prints:`afdrukken`,more:`+{{count}} meer`,ascending:`Oplopend`,descending:`Aflopend`,back:`Terug`,copy:`Kopiëren`,copied:`Gekopieerd!`,printer:`Printer`,remove:`Verwijderen`,type:`Type`,print:`Afdrukken`,rename:`Naam wijzigen`,move:`Verplaatsen`,create:`Maken`,duplicate:`Dupliceren`,left:`Links`,right:`Rechts`,run:`Uitvoeren`,running:`Bezig met uitvoeren...`},finance:{allTypes:`Alle typen`,allCostCenters:`Alle kostenplaatsen`,title:`Financiën`,subtitle:`Portemonnee, persoonlijke transacties en kostenplaatsen`,noAccess:`Je hebt geen toestemming om financiële gegevens te bekijken.`,personalView:`Persoonlijke weergave`,adminView:`Beheerdersweergave`,createCostCenter:`Kostenplaats maken`,adjustWallet:`Portemonnee aanpassen`,addManualPrint:`Handmatige afdruk toevoegen`,manageMembers:`Leden van kostenplaats beheren`,currentBalance:`Persoonlijk saldo`,transactions:`Transacties`,personalTransactions:`Persoonlijke transacties`,costCenters:`Kostenplaatsen`,availableForPrinting:`Beschikbaar voor toewijzing aan afdruk`,costCenterName:`Naam`,budgetType:`Budgettype`,monthlyBudget:`Maandbudget`,totalBudget:`Totaalbudget`,noBudget:`Geen budget`,create:`Maken`,selectUser:`Gebruiker selecteren`,transactionType:`Type`,amount:`Bedrag`,noCostCenter:`Geen kostenplaats`,descriptionOptional:`Beschrijving (optioneel)`,applyAdjustment:`Aanpassing toepassen`,memberCanPrint:`Lid mag afdrukken`,addMember:`Lid toevoegen`,canPrint:`Mag afdrukken`,noMembers:`Geen leden toegewezen.`,editCostCenter:`Kostenplaats bewerken`,myCostCenters:`Mijn kostenplaatsen`,costCentersHint:`Controleer budgetlimieten en houd kosten onder controle`,noCostCenters:`Geen kostenplaatsen gevonden.`,owner:`Eigenaar`,balance:`Rekeningsaldo`,unlimited:`Onbeperkt`,budgetPolicyHint:`Rekeningsaldi houden kosten bij. Afdrukken wordt alleen beperkt door het budget van de geselecteerde kostenplaats; zonder budget is afdrukken onbeperkt.`,budget:`Budget`,shared:`Gedeeld`,cannotEditPrivateCostCenter:`Privé-kostenplaatsen kunnen hier niet worden bewerkt`,recentTransactions:`Recente transacties`,transactionsHint:`Filteren op type en kostenplaats`,first:`Eerste`,prev:`Vorige`,next:`Volgende`,last:`Laatste`,pageNumberOf:`Pagina {{page}} van {{total}}`,noTransactions:`Geen transacties beschikbaar.`,noTransactionsForFilter:`Geen transacties komen overeen met de geselecteerde filters.`,costCenter:`Kostenplaats`,balanceAfter:`Saldo na`,userWithId:`Gebruiker #{{id}}`,partial:`Gedeeltelijk`,editTransaction:`Transactie bewerken`,selectCostCenter:`Kostenplaats selecteren...`,costCenterRequired:`Selecteer een kostenplaats`,amountExample:`bijv. 4,00`,manualAdjustmentExample:`bijv. Handmatige aanpassing`,userRequired:`Selecteer een gebruiker`,amountInvalid:`Bedrag moet een geldig getal zijn`,createdCostCenter:`Kostenplaats gemaakt`,createCostCenterFailed:`Kostenplaats maken mislukt`,transactionDeleted:`Transactie verwijderd`,deleteTransactionFailed:`Transactie verwijderen mislukt`,transactionEdited:`Transactie bijgewerkt en grootboek opnieuw berekend`,editTransactionFailed:`Transactie bewerken mislukt`,manualPrintCreated:`Handmatige afdrukkosten toegevoegd en grootboek opnieuw berekend`,manualPrintFailed:`Handmatige afdruk maken mislukt`,memberSaved:`Lid opgeslagen`,memberSaveFailed:`Lid opslaan mislukt`,memberRemoved:`Lid verwijderd`,memberRemoveFailed:`Lid verwijderen mislukt`,costCenterNameRequired:`Naam van kostenplaats is verplicht`,costCenterUpdated:`Kostenplaats bijgewerkt`,costCenterUpdateFailed:`Kostenplaats bijwerken mislukt`,confirmDeleteCostCenter:`Kostenplaats "{{name}}" verwijderen?`,costCenterDeleted:`Kostenplaats verwijderd`,costCenterDeleteFailed:`Kostenplaats verwijderen mislukt`,deleteTransactionConfirm:`Deze transactie verwijderen? Saldi worden automatisch opnieuw berekend.`,deposit:`Storten`,withdraw:`Opnemen`,printCharge:`Afdrukkosten`,deleteTransaction:`Transactie verwijderen`},printers:{title:`Printers`,addPrinter:`Printer toevoegen`,addPreflight:{checking:`Verbinding controleren...`,warning:`Sommige verbindingscontroles zijn mislukt. Deze printer kan als offline worden weergegeven. Controleer de onderstaande controles, herstel wat je kunt of sla toch op.`,back:`Terug`,saveAnyway:`Toch opslaan`},editPrinter:`Printer bewerken`,deletePrinter:`Printer verwijderen`,printerName:`Printernaam`,serialNumber:`Serienummer`,ipAddress:`IP-adres / hostnaam`,accessCode:`Toegangscode`,model:`Model`,nozzleCount:`Aantal nozzles`,autoArchive:`Automatisch archiveren`,status:{available:`Beschikbaar`,idle:`Inactief`,printing:`Bezig met afdrukken`,paused:`Gepauzeerd`,offline:`Offline`,problem:`Probleem`,error:`Fout`,finished:`Voltooid`,unknown:`Onbekend`},temperatures:{nozzle:`Nozzle`,bed:`Printbed`,chamber:`Kamer`},heaterHistory:{title:`Verwarmingsgeschiedenis`,openLabel:`Verwarmingsgeschiedenis bekijken`,nozzle:`Nozzle`,nozzle2:`Nozzle 2`,bed:`Printbed`,chamber:`Kamer`,error:`Geschiedenis laden mislukt`,empty:`Nog geen gegevens vastgelegd`},progress:`{{percent}}% voltooid`,timeRemaining:`{{time}} resterend`,deleteConfirm:`Weet je zeker dat je "{{name}}" wilt verwijderen?`,maintenanceOk:`Onderhoud OK`,maintenanceWarning:`{{count}} waarschuwing`,maintenanceWarning_plural:`{{count}} waarschuwingen`,maintenanceDue:`{{count}} te doen`,maintenanceDue_plural:`{{count}} te doen`,sort:{name:`Naam`,status:`Status`,model:`Model`,location:`Locatie`,eta:`ETA`,ascending:`Oplopend sorteren`,descending:`Aflopend sorteren`},cardSize:{small:`Kleine kaarten`,medium:`Middelgrote kaarten`,large:`Grote kaarten`,extraLarge:`Extra grote kaarten`},pageView:{openCamWallPage:`Camerawand als pagina openen`,cards:`Kaarten`,camWall:`Camerawand`},camWall:{page:{tokenRejected:`Deze camerawandlink is niet meer geldig. Het token is mogelijk verlopen of ingetrokken.`,loadFailed:`Printers konden niet worden geladen.`},noPrinters:`Geen printers om weer te geven`,noSignal:`Geen signaal`,live:`Live`,snap:`Momentopname`,off:`Uit`,summary:`{{live}} live, {{snap}} momentopnamen, {{total}} totaal`,layer:`Laag {{cur}}/{{total}}`,timeLeft:`{{time}} resterend`,statusMode:{off:`Uit`,compact:`Compact`,full:`Volledig`},settings:{title:`Instellingen camerawand`,maxLive:`Max. live streams`,maxLiveHint:`Hoeveel tegels tegelijk live streamen. De overige worden vernieuwd als momentopnamen.`,snapshotInterval:`Interval momentopnamen (seconden)`,snapshotIntervalHint:`Hoe vaak niet-live tegels een nieuwe momentopname ophalen.`,statusOverlay:`Statusoverlay`,statusOverlayHint:`Compact: alleen statusbadge. Volledig: + voortgang, laag, resterende tijd.`}},hideOffline:`Offline verbergen`,nextAvailable:`Volgende beschikbare`,powerOn:`Inschakelen`,offlinePrintersWithPlugs:`Offline printers met slimme stekkers`,noPrintersConfigured:`Nog geen printers geconfigureerd`,search:`Printers zoeken...`,noSearchResults:`Geen printers komen overeen met je zoekopdracht of filters`,filter:{allStatuses:`Alle statussen`,allLocations:`Alle locaties`},toolbar:{filters:`Filters`,view:`Weergave`,actions:`Acties`},readyToPrint:`Klaar om af te drukken`,external:`Extern`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Afdrukarchieven verwijderen`,noLabel:`Geen label`,printPreview:`Afdrukvoorbeeld`,width:`Breedte`,height:`Hoogte`,noObjectsFound:`Geen objecten gevonden`,objectsLoadedOnPrintStart:`Objecten worden geladen wanneer een afdruk start`,willBeSkipped:`Wordt overgeslagen`,name:`Naam`,serialCannotBeChanged:`Serienummer kan niet worden gewijzigd`,locationHelp:`Gebruikt om printers te groeperen en wachtrijtaken te filteren`,wifiSignal:{veryWeak:`Zeer zwak`,weak:`Zwak`,fair:`Redelijk`,good:`Goed`,excellent:`Uitstekend`},maintenanceUpToDate:`Al het onderhoud is bijgewerkt - Klik om te bekijken`,maintenance:{title:`In onderhoud`,subtitle:`Deze printer is gepauzeerd — niet verbonden, niet beschikbaar voor de wachtrij en verzendt geen meldingen.`,pillLabel:`Onderhoud`,exitButton:`Onderhoud afsluiten`,menuEnter:`Onderhoudsmodus inschakelen`,menuExit:`Onderhoudsmodus afsluiten`,toastEntered:`{{name}} staat nu in onderhoudsmodus`,toastExited:`{{name}} is weer online`,confirmMidPrintTitle:`Onderhoudsmodus inschakelen tijdens afdrukken?`,confirmMidPrintMessage:`{{name}} is momenteel aan het afdrukken. Als je de onderhoudsmodus inschakelt, wordt MQTT verbroken en stoppen voortgangsregistratie en voltooiingsmeldingen voor deze taak. Doorgaan?`,editFieldLabel:`Onderhoudsmodus`,editFieldHelp:`Als dit is ingeschakeld, wordt deze printer gepauzeerd voor MQTT, wachtrijverwerking en meldingen — handig voor reparatie, parallelle Bambuddy-installaties of tijdelijke buitengebruikstelling.`},chamberLightOn:`Kamerverlichting inschakelen`,chamberLightOff:`Kamerverlichting uitschakelen`,files:`Bestanden`,browseFiles:`Printerbestanden bekijken`,autoOffAfterPrint:`Automatisch uitschakelen na afdruk`,autoOffExecuted:`Automatisch uitschakelen is uitgevoerd - schakel de printer in om te resetten`,hmsErrors:`HMS-fouten`,viewHmsErrors:`{{count}} HMS-fout(en) bekijken`,resume:`Hervatten`,pause:`Pauzeren`,stop:`Stoppen`,camera:`Camera`,skipObject:`Object overslaan`,reconnect:`Opnieuw verbinden`,forceRefresh:`Geforceerd vernieuwen`,forceRefreshSuccess:`Vernieuwing aangevraagd`,mqttDebug:`MQTT-debug`,printerInformation:`Printerinformatie`,copyToClipboard:`Kopiëren`,copied:`Gekopieerd!`,state:`Status`,wifiSignalLabel:`Wifi-signaal`,developerMode:`Ontwikkelaarsmodus`,enabled:`Ingeschakeld`,disabled:`Uitgeschakeld`,addedOn:`Toegevoegd`,sdCard:`SD-kaart`,inserted:`Geplaatst`,notInserted:`Niet geplaatst`,totalPrintHours:`Afdrukuren`,activeNozzle:`Actief: {{nozzle}}-nozzle`,amsSwitchInletTooltip:`Filament Track Switch IN-{{inlet}} ({{side}}) — voedt beide nozzles`,nozzleRack:`Nozzlerek`,nozzleDocked:`Gedockt`,nozzleMounted:`Gemonteerd`,nozzleActive:`Actief`,nozzleIdle:`Inactief`,nozzleDiameter:`Diameter`,nozzleType:`Type`,nozzleStatus:`Status`,nozzleFilament:`Filament`,nozzleWear:`Slijtage`,nozzleMaxTemp:`Max. temp.`,nozzleSerial:`Serienummer`,nozzleHardenedSteel:`Gehard staal`,nozzleStainlessSteel:`Roestvast staal`,nozzleTungstenCarbide:`Wolfraamcarbide`,nozzleFlow:`Flow`,nozzleHighFlow:`Hoge flow`,nozzleStandardFlow:`Standaard`,firmwareUpdate:`Firmware-update`,firmwareInstructions:`Ga op het touchscreen van de printer naar`,firmwareNav:`Navigeer naar`,settings:`Instellingen`,firmware:`Firmware`,discoverPrinters:`Printers ontdekken`,searching:`Zoeken...`,manualEntry:`Handmatige invoer`,addFromCloud:`Toevoegen vanuit cloud`,toast:{printerDeleted:`Printer verwijderd`,missingSpoolAssignment:`Afdruk gestart op {{printer}}. Spoeltoewijzing ontbreekt voor: {{slots}}`,killSwitchTriggered:`De facturerings-noodstop heeft een ongeautoriseerde afdruk op {{printer}} gestopt: {{filename}}`,billingChargeFailed:`Facturering mislukt voor {{filename}} op {{printer}}. De budgetreservering is behouden; controleer de serverlogboeken.`,assignmentVerified:`Filament geladen in sleuf {{slot}} ({{printer}})`,assignmentVerifiedNoKprofile:`Sleuf {{slot}} op {{printer}} is geladen, maar de flowkalibratie (K-profiel) is niet toegepast`,assignmentNotConfirmed:`De toewijzing voor sleuf {{slot}} op {{printer}} kon niet worden bevestigd — controleer de AMS-sleuf`,printerAdded:`Printer toegevoegd`,printerUpdated:`Printer bijgewerkt`,failedToDelete:`Printer verwijderen mislukt`,failedToAdd:`Printer toevoegen mislukt`,connectionFailedNotAdded:`Kan geen verbinding maken met de printer. Controleer het IP-adres, serienummer en de toegangscode en bevestig dat LAN-only-modus is ingeschakeld. De printer is niet toegevoegd.`,failedToUpdate:`Printer bijwerken mislukt`,commandSent:`Opdracht verzonden`,failedToSendCommand:`Opdracht verzenden mislukt`,turnedOn:`{{name}} ingeschakeld`,failedToPowerOn:`Inschakelen van {{name}} mislukt`,scriptTriggered:`Script geactiveerd`,printStopped:`Afdruk gestopt`,printPaused:`Afdruk gepauzeerd`,printResumed:`Afdruk hervat`,referenceDeleted:`Referentie verwijderd`,detectionAreaSaved:`Detectiegebied opgeslagen`,failedToRunScript:`Script uitvoeren mislukt`,failedToStopPrint:`Afdruk stoppen mislukt`,failedToPausePrint:`Afdruk pauzeren mislukt`,failedToResumePrint:`Afdruk hervatten mislukt`,failedToControlChamberLight:`Kamerverlichting bedienen mislukt`,failedToSetSpeed:`Afdruksnelheid instellen mislukt`,failedToUpdateSetting:`Instelling bijwerken mislukt`,failedToSkipObjects:`Objecten overslaan mislukt`,failedToRereadRfid:`RFID opnieuw uitlezen mislukt`,failedToCheckPlate:`Plaat controleren mislukt`,failedToUpdateLabel:`Label bijwerken mislukt`,failedToDeleteReference:`Referentie verwijderen mislukt`,failedToSaveDetectionArea:`Detectiegebied opslaan mislukt`,plateCheckEnabled:`Plaatcontrole ingeschakeld`,plateCheckDisabled:`Plaatcontrole uitgeschakeld`,calibrationSaved:`Kalibratie opgeslagen!`,calibrationFailed:`Kalibratie mislukt`,rfidRereadInitiated:`Opnieuw uitlezen van RFID gestart`,loadInitiated:`Filament laden…`,unloadInitiated:`Filament ontladen…`,failedToLoad:`Filament laden mislukt`,failedToUnload:`Filament ontladen mislukt`},connection:{connected:`Verbonden`,offline:`Offline`},plateStatus:{markCleared:`Plaat als leeg markeren`,cleared:`Plaat leeg`,notCleared:`Plaat niet leeg`,inUse:`Plaat in gebruik`},queue:{inQueue:`{{count}} afdruk in wachtrij`,inQueue_plural:`{{count}} afdrukken in wachtrij`},controls:`Bediening`,rfid:{reread:`RFID opnieuw uitlezen`},ams:{load:`Laden`,unload:`Ontladen`,feedTitle:`{{slot}} naar welke nozzle laden?`,feedPrompt:`De Filament Track Switch kan dit slot naar beide hotends leiden. Kies welke je wilt voeden.`,feedLeft:`Linker nozzle`,feedRight:`Rechter nozzle`,feedAlreadyLoaded:`Al geladen`,switchNotReady:`De Filament Track Switch is nog niet ingesteld. Wijs elke AMS toe aan een inlaat op de printer en probeer het opnieuw.`},bedJog:{limitWarning:`Bewegingslimieten worden niet afgedwongen tijdens handmatige verplaatsingen — door een bug in Bambu-firmware worden software-eindstops bij externe opdrachten genegeerd. Verplaats voorzichtig om een botsing te voorkomen.`,title:`Jog-bediening`,bed:`Printbed`,step:`Stap (mm)`,up:`Plaat omhoog bewegen`,down:`Plaat omlaag bewegen`,toolheadUp:`Printkop omhoog bewegen`,toolheadDown:`Printkop omlaag bewegen`,disabledWhilePrinting:`Uitgeschakeld tijdens afdrukken`,notHomedTitle:`Printer is niet gehomed`,notHomedMessage:`De printer is sinds de laatste afdruk niet gehomed. Voer eerst auto-home uit voor een veilige positionering (parkeert de toolhead en homet daarna X, Y en Z), of verplaats toch — soft endstops worden omzeild.`,homeZ:`Auto Home`,moveAnyway:`Toch verplaatsen`,homingStarted:`Printer automatisch homen…`},permission:{noAdd:`Je hebt geen toestemming om printers toe te voegen`,noEdit:`Je hebt geen toestemming om printers te bewerken`,noDelete:`Je hebt geen toestemming om printers te verwijderen`,noControl:`Je hebt geen toestemming om printers te bedienen`,noFiles:`Je hebt geen toestemming om printerbestanden te openen`,noAmsRfid:`Je hebt geen toestemming om AMS-RFID opnieuw uit te lezen`,noSmartPlugControl:`Je hebt geen toestemming om slimme stekkers te bedienen`,noCamera:`Je hebt geen toestemming om camera's te bekijken`},modal:{addTitle:`Printer toevoegen`,editTitle:`Printer bewerken`,myPrinter:`Mijn printer`,selectModel:`Model selecteren...`,locationGroup:`Locatie / groep (optioneel)`,locationPlaceholder:`bijv. Werkplaats, kantoor, kelder`,autoArchiveLabel:`Voltooide afdrukken automatisch archiveren`,fromPrinterSettings:`Uit printerinstellingen`,modelOptional:`Model (optioneel)`,saveChanges:`Wijzigingen opslaan`},skipObjects:{tooltip:`Objecten overslaan`,onlyWhilePrinting:`Objecten overslaan (alleen tijdens afdrukken)`,requiresMultiple:`Objecten overslaan (vereist 2+ objecten)`,title:`Objecten overslaan`,matchIdsInfo:`Stem ID's af met het printerdisplay`,printerShowsIds:`Het printerscherm toont object-ID's op de bouwplaat`,skipSelected:`Geselecteerde overslaan`,skipping:`Overslaan...`,noObjectsSelected:`Geen objecten geselecteerd`,selectObjectsToSkip:`Selecteer objecten die je in de huidige afdruk wilt overslaan`,skipped:`overgeslagen`,objectsSkipped:`Objecten overgeslagen`,activeCount:`{{count}} actief`,waitForLayer:`Wacht tot laag 2+ om objecten over te slaan (momenteel laag {{layer}})`,skip:`Overslaan`,confirmTitle:`Object overslaan?`,confirmMessage:`Weet je zeker dat je "{{name}}" wilt overslaan? Dit kan niet ongedaan worden gemaakt.`,confirmAllMessage:`Alle resterende objecten zijn geselecteerd. Hierdoor wordt de afdruktaak gestopt. Doorgaan?`,confirmMultipleMessage:`{{count}} geselecteerde objecten overslaan? Dit kan niet ongedaan worden gemaakt.`},confirm:{deleteTitle:`Printer verwijderen`,deleteMessage:`Weet je zeker dat je "{{name}}" wilt verwijderen? Hiermee worden alle verbindingsinstellingen verwijderd.`,deleteArchivesNote:`De volledige afdrukgeschiedenis van deze printer wordt permanent verwijderd.`,keepArchivesNote:`De afdrukgeschiedenis blijft bewaard, maar is niet langer aan deze printer gekoppeld.`,stopTitle:`Afdruk stoppen`,stopMessage:`Weet je zeker dat je de huidige afdruk op "{{name}}" wilt stoppen? Hiermee wordt de afdruktaak geannuleerd.`,stopButton:`Afdruk stoppen`,pauseTitle:`Afdruk pauzeren`,pauseMessage:`Weet je zeker dat je de huidige afdruk op "{{name}}" wilt pauzeren?`,pauseButton:`Afdruk pauzeren`,resumeTitle:`Afdruk hervatten`,resumeMessage:`Weet je zeker dat je de afdruk op "{{name}}" wilt hervatten?`,resumeButton:`Afdruk hervatten`,powerOnTitle:`Printer inschakelen`,powerOnMessage:`Weet je zeker dat je de stroom voor "{{name}}" wilt INSCHAKELEN?`,powerOnButton:`Inschakelen`,powerOffTitle:`Printer uitschakelen`,powerOffMessage:`Weet je zeker dat je de stroom voor "{{name}}" wilt UITSCHAKELEN?`,powerOffWarning:`WAARSCHUWING: "{{name}}" is momenteel aan het afdrukken! Weet je zeker dat je de stroom wilt UITSCHAKELEN? Dit onderbreekt de afdruk en kan de printer beschadigen.`,powerOffButton:`Uitschakelen`,haToggleTitle:`"{{name}}" omschakelen`,haToggleMessage:`Home Assistant-entiteit {{entity}} omschakelen? Hierdoor kan de stroom worden uitgeschakeld als deze momenteel aan staat.`,haToggleWarning:`WAARSCHUWING: "{{name}}" is momenteel aan het afdrukken! Het omschakelen van {{entity}} kan de stroom onderbreken en de afdruk stoppen. Doorgaan?`,haToggleButton:`Omschakelen`},bulk:{select:`Selecteren`,selectAll:`Alles selecteren`,selectByLocation:`Selecteren op locatie`,selected:`{{count}} geselecteerd`,actions:{stop:`Stoppen`,pause:`Pauzeren`,resume:`Hervatten`,clearPlate:`Printbed vrijgeven`,clearHMS:`Meldingen wissen`},confirm:{stopTitle:`{{count}} afdrukken stoppen`,stopMessage:`Hiermee worden actieve afdrukken op {{count}} printer(s) geannuleerd. Deze actie kan niet ongedaan worden gemaakt.`,stopButton:`Alles stoppen`,pauseTitle:`{{count}} afdrukken pauzeren`,pauseMessage:`Hiermee worden actieve afdrukken op {{count}} printer(s) gepauzeerd.`,pauseButton:`Alles pauzeren`,clearPlateTitle:`{{count}} printbedden vrijgeven`,clearPlateMessage:`Hiermee wordt het printbed op {{count}} printer(s) vrijgegeven en kunnen wachtrijtaken worden gestart.`,clearPlateButton:`Alles wissen`},success:`{{action}} voltooid op {{count}} printer(s)`,partial:`{{succeeded}} geslaagd, {{failed}} mislukt`,noneApplicable:`Geen van de geselecteerde printers heeft de juiste status voor deze actie`,selectByState:`Selecteren op status`},discovery:{title:`Printers ontdekken`,searching:`Zoeken...`,scanning:`Scannen...`,scanProgress:`Scannen... {{scanned}}/{{total}}`,foundPrinters:`{{count}} printer(s) gevonden`,noPrintersFound:`Geen printers gevonden`,noPrintersFoundSubnet:`Geen printers gevonden in het opgegeven subnet.`,noPrintersFoundNetwork:`Geen printers gevonden op het netwerk.`,allConfigured:`Alle ontdekte printers zijn al geconfigureerd.`,alreadyAdded:`Al toegevoegd`,select:`Selecteren`,manualEntry:`Handmatige invoer`,addFromCloud:`Toevoegen vanuit cloud`,subnetToScan:`Te scannen subnet`,dockerNote:`Docker gedetecteerd. Voer het subnet van je printer in CIDR-notatie in. Vereist network_mode: host in docker-compose.yml.`,scanSubnet:`Subnet scannen op printers`,discoverNetwork:`Printers op netwerk ontdekken`,scanningSubnet:`Subnet scannen op Bambu-printers...`,scanningNetwork:`Netwerk scannen...`,serialRequired:`Serienummer verplicht`,unknown:`Onbekend`,failedToStart:`Ontdekking starten mislukt`,customSubnetOption:`Aangepast subnet...`,customSubnetLabel:`Aangepast subnet (CIDR)`,customSubnetNote:`Gebruik een aangepast subnet als je printer zich op een ander netwerk bevindt dan deze server. De FTP-poort (990) en MQTT-poort (8883) moeten bereikbaar zijn over de routeringsgrens.`},drying:{start:`Drogen starten`,stop:`Drogen stoppen`,temperature:`Temperatuur`,duration:`Duur`,hours:`uren`,timeRemaining:`{{time}} resterend`,active:`Drogen`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`Drogen niet ondersteund`,powerRequired:`Sluit de AMS-voedingsadapter aan om drogen in te schakelen`,cannotDryNow:`AMS kan op dit moment niet beginnen met drogen`,startingDrying:`Drogen starten...`,toastCommandSent:`Droogopdracht verzonden`,toastStopped:`Drogen gestopt`,toastNotStarted:`De printer heeft de opdracht geaccepteerd, maar de AMS is niet begonnen met drogen. Controleer of de AMS-voedingsadapter is aangesloten en de printer inactief is.`,screenOnly:`AMS-drogen op deze printer kan alleen via het eigen scherm van de printer worden bediend (Bambu-beperking)`,stoppingDrying:`Drogen stoppen...`,rotateTray:`Spoel draaien tijdens drogen`,rotateUnavailableReason:`Niet beschikbaar — een sleuf in deze AMS is naar de toolhead geladen. De spoel wordt door de toevoerbuis geblokkeerd en kan niet draaien. Trek eerst het filament terug.`,startMode:`Starttijd`,modeNow:`Nu`,modeDelay:`Na vertraging`,modeAtTime:`Op tijdstip`,schedule:`Plannen`,scheduledFor:`Drogen gepland voor {{time}}`,scheduledAsap:`Drogen gepland (wachten op printer)`,cancelScheduled:`Gepland drogen annuleren`,scheduleFailed:`Drogen plannen mislukt`,retractFilament:`Trek het filament bij de AMS-uitgang terug om het drogen te starten`,waitingAmsNotFound:`Wachten tot de AMS wordt gedetecteerd`,waitingOffline:`Wachten tot de printer online komt`,waitingPrinterBusy:`Wachten tot de printer vrij is`,waitingAlreadyDrying:`Wachten tot de huidige droogcyclus is voltooid`,waitingInterrupted:`Onderbroken, wordt opnieuw gestart zodra de printer vrij is`,scheduleFailedReason:`Gepland drogen mislukt: {{reason}}`,scheduleFailedUnknown:`Onbekende fout`,dismissFailed:`Negeren`},amsBackup:{titleOn:`AMS Filament Backup staat AAN. Klik om uit te schakelen.`,titleOff:`AMS Filament Backup staat UIT. Klik om in te schakelen.`,titleUnknown:`Status van AMS Filament Backup is niet beschikbaar op deze printer.`,toastEnabled:`AMS Filament Backup ingeschakeld`,toastDisabled:`AMS Filament Backup uitgeschakeld`,modalTitle:`AMS Filament Backup`,modalHelp:`Wanneer de actieve sleuf leeg raakt, doorloopt de printer in deze volgorde alle overeenkomende sleuven met hetzelfde preset en dezelfde kleur.`,modalNoSlots:`Geen filament geladen.`,modalNoPairs:`Geen back-upparen — geen twee sleuven gebruiken hetzelfde filamentprofiel en dezelfde kleur.`,extruderRightShort:`R`,extruderLeftShort:`L`,stateOn:`Ingeschakeld`,stateOff:`Uitgeschakeld`,stateUnknown:`Niet ondersteund op deze printer`},activeJobSlot:{title:`Deze sleuf is filament {{n}} in de actieve afdruk`,ariaLabel:`Actieve afdruksleuf {{n}}`},expectedSlot:{title:`De printer wacht op filament in deze sleuf`,ariaLabel:`Verwachte filamentsleuf {{n}}`,label:`{{ams}} · Sleuf {{slot}}`,external:`Externe spoel`},filaments:`Filamenten`,externalSpool:{hide:`Externe spoel verbergen`,show:`Externe spoel weergeven`},openCameraOverlay:`Camera-overlay openen`,openCameraWindow:`Camera in nieuw venster openen`,firmwareUpdateAvailable:`Firmware-update beschikbaar: {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — up-to-date`,firmwareUpdateButton:`Bijwerken`,plateDetection:{noPermission:`Je hebt geen toestemming om printers bij te werken`,enabledClick:`Plaatcontrole ingeschakeld - Klik om uit te schakelen`,disabledClick:`Plaatcontrole uitgeschakeld - Klik om in te schakelen`,manageCalibration:`Kalibratie voor plaatdetectie beheren`,calibrationRequired:`Kalibratie vereist`,calibrationInstructions:`Zorg dat de bouwplaat <strong>volledig leeg</strong> is en klik daarna op Kalibreren.`,calibrationDescription:`Bij kalibratie wordt een referentiebeeld van de lege plaat vastgelegd. Toekomstige controles vergelijken hiermee om objecten te detecteren.`,calibrationTip:`<strong>Tip:</strong> Je kunt maximaal 5 kalibraties voor verschillende platen opslaan. Het systeem gebruikt bij een controle automatisch de beste overeenkomst.`,plateEmpty:`Plaat lijkt leeg`,objectsDetected:`Objecten op plaat gedetecteerd`,confidence:`Betrouwbaarheid`,difference:`Verschil`,analysisPreview:`Analysevoorbeeld:`,analysisLegend:`Groen kader = detectiegebied, rode overlay = verschillen ten opzichte van kalibratie`,savedReferences:`Opgeslagen referenties ({{count}}/{{max}})`,deleteReference:`Referentie verwijderen`,labelPlaceholder:`Label...`,clickToEdit:`{{label}} - Klik om te bewerken`,clickToAddLabel:`Klik om label toe te voegen`},speed:{title:`Afdruksnelheid`,silent:`Stil (50%)`,standard:`Standaard (100%)`,sport:`Sport (124%)`,ludicrous:`Ludicrous (166%)`},airduct:{title:`Luchtkanaalmodus`,cooling:`Koelen`,heating:`Verwarmen`},noSdCard:`Geen SD`,door:{open:`Open`,closed:`Gesloten`},fans:{partCooling:`Onderdeelkoelventilator`,auxiliary:`Hulpventilator`,leftAuxiliary:`Linker hulpventilator`,exhaust:`Afvoer`,chamber:`Kamerventilator`},clickToViewHmsErrors:`Klik om HMS-fouten te bekijken`,aiDetection:{safe:`Veilig`,warning:`Waarschuwing`,failure:`Mislukking`,idle:`Inactief`,error:`Controleert niet`,unknown:`Bezig met starten`,tooltipError:`AI-storingsdetectie controleert deze print niet: {{reason}} - klik voor details`,tooltipUnknown:`AI-storingsdetectie: wachten op het eerste resultaat - klik voor details`,errorHint:`Deze print wordt niet gecontroleerd. De detectie hervat automatisch zodra het probleem hieronder is opgelost.`,tooltip:`AI-foutdetectie: {{status}} (score {{score}}) - klik voor details`,tooltipIdle:`AI-foutdetectie ingeschakeld - bewaking start bij de volgende afdruk - klik voor details`,modalTitle:`AI-foutdetectie - {{name}}`,currentStatus:`Status`,score:`Score`,framesAnalyzed:`Geanalyseerde frames`,idleHint:`Er wordt momenteel geen afdruk bewaakt. De bewaking start automatisch bij de volgende afdruk.`,lastError:`Laatste fout`,openSettings:`Instellingen openen`},estimatedCompletion:`Geschatte voltooiingstijd`,plateNumber:`Plaat {{number}}`,slotOptions:`Sleufopties`,amsPopup:{friendlyName:`AMS-naam`,friendlyNamePlaceholder:`bijv. AMS-naam`,serialNumber:`Serienummer`,firmwareVersion:`Firmware`,save:`Opslaan`,clear:`Wissen`,noEditPermission:`Je hebt geen toestemming om AMS-eenheden te hernoemen`},firmwareModal:{title:`Firmware-update`,titleUpToDate:`Firmware-informatie`,currentVersion:`Huidig:`,latestVersion:`Nieuwste:`,releaseNotes:`Releaseopmerkingen`,checkingPrereqs:`Vereisten controleren...`,sdCardReady:`SD-kaart gereed. Klik hieronder om firmware te uploaden.`,uploadedSuccess:`Firmware geüpload naar SD-kaart!`,applyInstructions:`Om de update op je printer toe te passen:`,step1:`Ga op het touchscreen van de printer naar <strong>Instellingen</strong>`,step2:`Navigeer naar <strong>Firmware</strong>`,step3:`Selecteer <strong>Update vanaf SD-kaart</strong>`,step4:`De update duurt 10-20 minuten`,done:`Klaar`,starting:`Starten...`,uploadFirmware:`Firmware uploaden`,uploadFailed:`Upload starten mislukt: {{error}}`,uploadedToast:`Firmware geüpload! Start de update vanaf het printerscherm.`,availableVersions:`Beschikbare versies`,usable:`Bruikbaar`,unavailable:`Niet beschikbaar`,installed:`Geïnstalleerd`,newerBadge:`nieuwer`,olderBadge:`ouder`,currentBadge:`huidig`},accessCodePlaceholder:`Laat leeg om huidige waarde te behouden`,roi:{title:`Detectiegebied (ROI)`,xStart:`X-start`,yStart:`Y-start`,width:`Breedte`,height:`Hoogte`,instruction:`Pas het detectiegebied aan zodat het op de bouwplaat is gericht. Het groene kader in het voorbeeld toont het huidige gebied.`},developerModeWarning:`Developer LAN-modus is niet ingeschakeld op: {{names}}. Sommige functies werken mogelijk niet.`,howToEnable:`Inschakelen`,incompatibleFile:`Dit bestand is gesliced voor {{slicedFor}}, maar deze printer is een {{printerModel}}`,dropNotPrintable:`Alleen .gcode- en .gcode.3mf-bestanden kunnen worden afgedrukt`,dropToPrint:`Sleep hierheen om af te drukken`,dropToQueue:`Sleep hierheen voor wachtrij`},archives:{media:{title:`Afdrukvideo's`,download:`Afdrukvideo's downloaden`,searching:`Printer controleren op video's…`,searchFailed:`Printer kon niet op video's worden gecontroleerd.`,none:`Geen timelapse- of IP-camerafragmenten gevonden voor deze afdruk.`,attachedTimelapse:`Gekoppelde timelapse`,printerFiles:`Bestanden die nog op de printer staan`,downloadSelected:`Geselecteerde downloaden`,printerMissing:`Printer is niet meer geconfigureerd`,timelapseUnavailable:`De timelapse-map kon niet worden gelezen`,ipcamUnavailable:`De IP-camera-map kon niet worden gelezen`},title:`Afdrukarchieven`,no3mfBanner:{title:`Sommige recente afdrukken konden niet met miniaturen worden gearchiveerd`,body:`De slicer heeft het .gcode.3mf-bestand niet op de SD-kaart van de printer achtergelaten, waardoor Bambuddy de miniatuur of slicermetadata niet kon ophalen. Dit komt meestal doordat "Verzonden bestanden opslaan op externe opslag" is uitgeschakeld in de slicer (tabblad Apparaat in Bambu Studio / OrcaSlicer).`,docsLink:`Zie installatiestap 4`,dismissLabel:`Deze melding sluiten`,docsLinkInternalStorage:`Waarom dit gebeurt`,titleInternalStorage:`Sommige recente afdrukken bleven op de interne opslag van de printer staan`,bodyInternalStorage:`Bambu Studio plaatste het geslicede bestand op de interne opslag van de printer in plaats van op de kaart, waardoor Bambuddy via FTP niets kon uitlezen. Op H2-serie, P2S en X2D doet de knop Afdrukken dit altijd — alleen Verzenden biedt een keuze, en ook daar is Cache standaard. Die afdrukken worden nog steeds gearchiveerd met naam en timing, maar zonder miniatuur of slicermetadata. Voor volledige archieven start je de afdruk vanuit Bambuddy, slice je in OrcaSlicer, of gebruik je in Bambu Studio Verzenden met Extern geselecteerd en start je daarna de afdruk. Voor al deze opties is een kaart of USB-stick in de printer nodig.`,titleNoExternalStorage:`Sommige recente afdrukken konden niet worden gearchiveerd — geen opslag in de printer`,bodyNoExternalStorage:`De printer meldt dat er geen kaart of USB-stick in de sleuf zit, waardoor het geslicede bestand nergens kon worden opgeslagen en Bambuddy niets kon uitlezen. Plaats er een en de volgende afdruk wordt volledig gearchiveerd.`,titleInternalHistory:`Sommige recente prints zijn gestart vanaf een bestand dat al op de printer stond`,bodyInternalHistory:`Die prints liepen vanuit de eigen bibliotheek van de printer — opnieuw afdrukken via het scherm, starten vanuit Handy, of een bestand dat eerder is verstuurd en later is afgedrukt. Bambuddy leest printbestanden via FTP, dat alleen de kaart of stick aanbiedt, terwijl de printer die bibliotheek bewaart op een plek die FTP niet kan bereiken. Er was dus geen 3MF om te lezen. Geen enkele slicer-instelling verandert dit, omdat er voor deze prints niets is verstuurd. Ze worden nog steeds gearchiveerd met naam en tijden, en via Archief bewerken kun je het gebruikte filament handmatig invullen. Start de print vanuit Bambuddy of vanuit je slicer voor een volledig archief.`,titleFtpsCooloff:`Sommige recente prints konden niet worden gearchiveerd — de printer weigerde de bestandsverbinding`,bodyFtpsCooloff:`Bambuddy opende de bestandsoverdrachtspoort van de printer (FTPS 990) en de printer antwoordde met iets dat geen TLS is, waardoor er niets van te lezen viel. Die prints staan nog wel in het archief met hun naam en tijden, alleen zonder miniatuur of slicer-metadata. Dit is geen slicer-instelling en niets wat u hebt gewijzigd — dezelfde modellen en firmware draaien normaal op andere installaties, en een getroffen printer werkt later meestal vanzelf weer. Na zo'n fout pauzeert Bambuddy de overdrachten naar die printer vijf minuten en haalt het bestand daarna alsnog op, dus een korte episode herstelt zichzelf; een kaart die leeg blijft betekent dat de weigering langer duurde dan de herhaalpoging. Wat het veroorzaakt is nog niet bekend. Blijft het gebeuren, zet dan debug-logging aan op de pagina Systeem en voeg een supportpakket bij uw melding.`,titleFtpTransferFailed:`Sommige recente prints konden niet worden gearchiveerd — de bestandsoverdracht duurde te lang`,bodyFtpTransferFailed:`Het gesliced bestand stond op de kaart van de printer en de printer leverde het ook aan, maar de overdracht was niet binnen de toegestane tijd klaar. Bij de start van een print bedient de printer ook zijn camera, zijn statusberichten en de upload van de opdracht, en een grote 3MF komt daar niet altijd doorheen. Die prints zijn nog steeds gearchiveerd met naam en tijden, alleen zonder miniatuur of slicergegevens. Dit is geen slicerinstelling en niets dat u hebt gewijzigd. Bambuddy haalt het bestand in de tien minuten daarna nog drie keer op, dus de meeste gevallen lossen zichzelf op; een kaart die leeg blijft betekent dat ook al die pogingen te lang duurden. Als het vaker gebeurt, verhoog dan Verbindingstime-out onder Instellingen > Netwerk > FTP opnieuw proberen.`},searchPlaceholder:`Archieven zoeken...`,filterByPrinter:`Filteren op printer`,filterByStatus:`Filteren op status`,sortBy:`Sorteren op`,sortNewest:`Nieuwste eerst`,sortOldest:`Oudste eerst`,sortName:`Naam`,sortDuration:`Duur`,sortLargest:`Grootste eerst`,sortSmallest:`Kleinste eerst`,sortSize:`Grootte`,noArchives:`Geen archieven gevonden`,noArchivesSearch:`Geen archieven komen overeen met je zoekopdracht`,originalPrintNotVisible:`Originele afdruk niet zichtbaar - probeer filters te wissen`,noArchivesYet:`Nog geen archieven`,prints:`afdrukken`,pagination:{showing:`Weergegeven`,to:`tot`,of:`van`,show:`Tonen`,page:`Pagina`,all:`Alle`},loadingArchives:`Archieven laden...`,releaseToUpload:`Loslaten om te uploaden`,showAll:`Alles tonen`,showFavoritesOnly:`Alleen favorieten tonen`,gridView:`Rasterweergave`,listView:`Lijstweergave`,calendarView:`Kalenderweergave`,logView:`Afdruklogboek`,manageTags:`Tags beheren`,showFailedPrints:`Mislukte afdrukken tonen`,hideFailedPrints:`Mislukte afdrukken verbergen`,hideDuplicates:`Duplicaten verbergen`,viewOriginalPrint:`Klik om originele afdruk te bekijken (#{{id}})`,printTime:`Afdruktijd`,filamentUsed:`Filament gebruikt`,cost:`Kosten`,preview:`Voorbeeld`,deleteArchive:`Archief verwijderen`,deleteConfirm:`Weet je zeker dat je dit archief wilt verwijderen?`,favorite:`Favoriet`,unfavorite:`Uit favorieten verwijderen`,viewDetails:`Details bekijken`,status:{completed:`Voltooid`,failed:`Mislukt`,stopped:`Gestopt`},toast:{source3mfAttached:`Bron-3MF gekoppeld: {{filename}}`,failedUploadSource3mf:`Uploaden van bron-3MF mislukt`,source3mfRemoved:`Bron-3MF verwijderd`,failedRemoveSource3mf:`Verwijderen van bron-3MF mislukt`,f3dAttached:`F3D gekoppeld: {{filename}}`,failedUploadF3d:`Uploaden van F3D mislukt`,f3dRemoved:`F3D verwijderd`,failedRemoveF3d:`Verwijderen van F3D mislukt`,timelapseAttached:`Timelapse gekoppeld: {{filename}}`,timelapseAlreadyAttached:`Timelapse is al gekoppeld`,noMatchingTimelapse:`Geen overeenkomende timelapse gevonden`,failedScanTimelapse:`Scannen naar timelapse mislukt`,failedAttachTimelapse:`Timelapse koppelen mislukt`,timelapseRemoved:`Timelapse verwijderd`,failedRemoveTimelapse:`Timelapse verwijderen mislukt`,timelapseUploaded:`Timelapse geüpload: {{filename}}`,failedUploadTimelapse:`Timelapse uploaden mislukt`,archiveDeleted:`Archief verwijderd`,failedDeleteArchive:`Archief verwijderen mislukt`,addedToFavorites:`Toegevoegd aan favorieten`,removedFromFavorites:`Uit favorieten verwijderd`,projectUpdated:`Project bijgewerkt`,failedUpdateProject:`Project bijwerken mislukt`,linkCopied:`Link naar klembord gekopieerd`,failedCopyLink:`Link kopiëren mislukt`,photoDeleted:`Foto verwijderd`,failedDeletePhoto:`Foto verwijderen mislukt`,failedDeleteArchives:`Archieven verwijderen mislukt`,failedUpdateFavorites:`Favorieten bijwerken mislukt`,exportDownloaded:`Export gedownload`,exportFailed:`Export mislukt`},menu:{print:`Afdrukken`,openInBambuStudio:`Openen in slicer`,slice:`Slicen`,externalLink:`Externe link`,viewOnMakerWorld:`Bekijken op MakerWorld`,preview3d:`3D-voorbeeld`,viewTimelapse:`Timelapse bekijken`,scanForTimelapse:`Zoeken naar timelapse`,uploadTimelapse:`Timelapse uploaden`,removeTimelapse:`Timelapse verwijderen`,downloadSource3mf:`Bron-3MF downloaden`,uploadSource3mf:`Bron-3MF uploaden`,replaceSource3mf:`Bron-3MF vervangen`,removeSource3mf:`Bron-3MF verwijderen`,uploadF3d:`F3D uploaden`,replaceF3d:`F3D vervangen`,downloadF3d:`F3D downloaden`,removeF3d:`F3D verwijderen`,download:`Downloaden`,copyDownloadLink:`Downloadlink kopiëren`,qrCode:`QR-code`,viewPhotos:`Foto's bekijken`,viewPhotosCount:`Foto's bekijken ({{count}})`,projectPage:`Projectpagina`,addToFavorites:`Toevoegen aan favorieten`,removeFromFavorites:`Uit favorieten verwijderen`,edit:`Bewerken`,printLog:`Afdruklogboek`,goToProject:`Ga naar project: {{name}}`,addToProject:`Toevoegen aan project`,removeFromProject:`Uit project verwijderen`,loading:`Laden...`,noProjectsAvailable:`Geen projecten beschikbaar`,searchProjects:`Projecten zoeken…`,select:`Selecteren`,deselect:`Deselecteren`,delete:`Verwijderen`},permission:{noReprint:`Je hebt geen toestemming om dit archief opnieuw af te drukken`,noAddToQueue:`Je hebt geen toestemming om aan de wachtrij toe te voegen`,noUpdateArchives:`Je hebt geen toestemming om archieven bij te werken`,noUploadFiles:`Je hebt geen toestemming om bestanden te uploaden`,noDownload:`Je hebt geen toestemming om archieven te downloaden`,noCopyLink:`Je hebt geen toestemming om downloadlinks te kopiëren`,noDelete:`Je hebt geen toestemming om dit archief te verwijderen`,noEdit:`Je hebt geen toestemming om dit item te bewerken`,noCreate:`Je hebt geen toestemming om archieven te maken`},platePicker:{title:`Selecteer plaat voor voorbeeld`,hint:`Dit archief bevat meerdere platen. Kies er een om in de GCode-viewer te openen.`,plateLabel:`Plaat {{index}}`,objectCount:`{{count}} object`,objectCount_plural:`{{count}} objecten`,noGcode:`Dit archief bevat geen geslicede G-code voor een voorbeeld. Open het eerst in Bambu Studio om te slicen.`},card:{previousPlate:`Vorige plaat`,nextPlate:`Volgende plaat`,plateNumber:`Plaat {{index}}`,moreOptions:`Klik met rechts voor meer opties`,addToFavorites:`Toevoegen aan favorieten`,removeFromFavorites:`Uit favorieten verwijderen`,cancelled:`geannuleerd`,failed:`mislukt`,duplicate:`duplicaat`,duplicateTitle:`Dit model is eerder afgedrukt`,openSource3mf:`Bron-3MF openen in Bambu Studio (klik met rechts voor meer opties)`,downloadF3d:`Fusion 360-ontwerpbestand downloaden`,viewTimelapse:`Timelapse bekijken`,viewPhoto:`1 foto bekijken`,viewPhotos:`{{count}} foto's bekijken`,openFolder:`Map openen: {{name}}`,slicedFile:`Gesliced bestand - klaar om af te drukken`,sourceFile:`Alleen bronbestand - geen AMS-toewijzing beschikbaar`,gcode:`GCODE`,source:`BRON`,project:`Project: {{name}}`,runsBadge:`{{count}} afdrukken`,runsBadgeTitle:`{{count}} afdrukken totaal — {{successful}} geslaagd, {{failed}} mislukt. Klik om het volledige afdruklogboek te bekijken.`,estimated:`Geschat: {{time}}`,actual:`Werkelijk: {{time}}`,accuracy:`Nauwkeurigheid: {{percent}}%`,filament:`{{weight}}g`,layer:`{{count}} laag`,layers:`{{count}} lagen`,object:`{{count}} object`,objects:`{{count}} objecten`,slicedFor:`Gesliced voor {{model}}`,uploadedBy:`Geüpload door`,noPermissionReprint:`Je hebt geen toestemming om opnieuw af te drukken`,noFileForReprint:`Geen 3MF-bestand beschikbaar — het bestand kon niet van de printer worden gedownload toen de afdruk werd geregistreerd`,slicerAmsMapping:`AMS-toewijzing opgeslagen ({{printer}})`,slicerAmsMappingTooltip:`De eigen AMS-sleufkeuze van de slicer is opgeslagen voor {{printer}}. Tray-nummers hebben alleen betekenis op die printer, dus bij opnieuw afdrukken worden ze alleen hergebruikt als opnieuw naar {{printer}} wordt afgedrukt.`,noPermissionEdit:`Je hebt geen toestemming om archieven te bewerken`,noPermissionDelete:`Je hebt geen toestemming om archieven te verwijderen`,openInBambuStudio:`Openen in slicer`,openInBambuStudioToSlice:`Openen in slicer om te slicen`,slice:`Slicen`,externalLink:`Externe link`,makerWorld:`MakerWorld: {{designer}}`,viewProject:`Project bekijken`,noExternalLink:`Geen externe link`,preview3d:`3D-voorbeeld`,download:`Downloaden`,edit:`Bewerken`,delete:`Verwijderen`},runLog:{title:`Afdruklogboek`,modalTitle:`Afdruklogboek — {{name}}`,modalTitleFallback:`dit archief`,empty:`Nog geen afdrukgebeurtenissen geregistreerd voor dit archief.`,col:{date:`Datum`,status:`Status`,duration:`Duur`,filament:`Filament`,cost:`Kosten`},status:{completed:`Voltooid`,failed:`Mislukt`,cancelled:`Geannuleerd`,stopped:`Gestopt`,skipped:`Overgeslagen`,printing:`Bezig met afdrukken`}},modal:{deleteArchive:`Archief verwijderen`,deleteConfirm:`Weet je zeker dat je "{{name}}" wilt verwijderen? Deze actie kan niet ongedaan worden gemaakt.`,deleteButton:`Verwijderen`,deletePurgeStats:`Deze afdruk ook verwijderen uit Snelle statistieken (filament, tijd, kosten, energie)`,deleteQueueItemsWarning:`{{count}} wachtrij-item(s) gekoppeld aan dit archief worden ook verwijderd.`,deleteBlockedByPrinting:`Kan niet verwijderen — {{count}} wachtrij-item(s) zijn momenteel aan het afdrukken. Stop eerst de afdruk en probeer het daarna opnieuw.`,removeSource3mf:`Bron-3MF verwijderen`,removeSource3mfConfirm:`Weet je zeker dat je het bron-3MF-bestand uit "{{name}}" wilt verwijderen? Hiermee wordt het originele slicerprojectbestand verwijderd.`,removeButton:`Verwijderen`,removeF3d:`F3D verwijderen`,removeF3dConfirm:`Weet je zeker dat je het Fusion 360-ontwerpbestand uit "{{name}}" wilt verwijderen?`,removeTimelapse:`Timelapse verwijderen`,removeTimelapseConfirm:`Weet je zeker dat je de timelapsevideo uit "{{name}}" wilt verwijderen?`,timelapse:`{{name}} - Timelapse`,selectTimelapse:`Timelapse selecteren`,selectTimelapseDesc:`Geen automatische overeenkomst gevonden. Selecteer de timelapse voor deze afdruk:`,deleteArchives:`Archieven verwijderen`,deleteArchivesConfirm:`Weet je zeker dat je {{count}} archief/archieven wilt verwijderen? Deze actie kan niet ongedaan worden gemaakt.`,deleteCount:`{{count}} verwijderen`},page:{title:`Archieven`,printsCount:`{{filtered}} van {{total}} afdrukken`,dropFilesHere:`Sleep .3mf-bestanden hierheen`,releaseToUpload:`Loslaten om te uploaden`,only3mfSupported:`Alleen .3mf-bestanden worden ondersteund`,close:`Sluiten`,selected:`{{count}} geselecteerd`,selectAll:`Alles selecteren`,tags:`Tags`,project:`Project`,favorite:`Favoriet`,delete:`Verwijderen`,toggledFavorites:`Favorieten omgeschakeld voor {{count}} archief/archieven`,failedUpdateFavorites:`Favorieten bijwerken mislukt`,archivesDeleted:`{{count}} archief/archieven verwijderd`,failedDeleteArchives:`Archieven verwijderen mislukt`,photoDeleted:`Foto verwijderd`,failedDeletePhoto:`Foto verwijderen mislukt`},list:{name:`Naam`,printer:`Printer`,date:`Datum`,size:`Grootte`,actions:`Acties`,hasTimelapse:`Heeft timelapse`},log:{date:`Datum`,printName:`Afdruknaam`,printer:`Printer`,user:`Gebruiker`,status:`Status`,duration:`Duur`,filament:`Filament`,filamentUsed:`Filament gebruikt`,cost:`Kosten`,energy:`Energie`,energyCost:`Energiekosten`,completedAt:`Voltooid`,columns:`Kolommen`,sortBy:`Sorteren op {{column}}`,allPrinters:`Alle printers`,allUsers:`Alle gebruikers`,allStatuses:`Alle statussen`,cancelled:`Geannuleerd`,skipped:`Overgeslagen`,dateFrom:`Van`,dateTo:`Tot`,noEntries:`Geen afdruklogboekitems gevonden`,showing:`{{count}} van {{total}} items weergegeven`,rowsPerPage:`Rijen`,page:`Pagina`,prev:`Vorige`,next:`Volgende`,clearLog:`Logboek wissen`,clearLogTitle:`Afdruklogboek wissen`,clearLogConfirm:`Alle items in het afdruklogboek worden permanent verwijderd. Archieven en wachtrij-items blijven intact. Deze actie kan niet ongedaan worden gemaakt. Weet je het zeker?`,clearLogButton:`Alles wissen`,cleared:`{{count}} logboekitems gewist`,clearFailed:`Afdruklogboek wissen mislukt`,deleteEntryTitle:`Afdruklogboekitem verwijderen`,deleteEntryConfirm:`Dit item wordt uit het logboek verwijderd en de bijdragen aan filament, tijd en kosten verdwijnen uit Snelle statistieken. Het bijbehorende archief (indien aanwezig) blijft intact. Deze actie kan niet ongedaan worden gemaakt.`,entryDeleted:`Afdruklogboekitem verwijderd`,entryDeleteFailed:`Afdruklogboekitem verwijderen mislukt`,editEntryTitle:`Afdruklogboekitem bewerken`,editEntryDescription:`Classificeer deze afdrukrun. De widget Foutenanalyse groepeert op deze waarden, zodat wijzigingen direct in de statistieken worden verwerkt.`,entryUpdated:`Afdruklogboekitem bijgewerkt`,entryUpdateFailed:`Afdruklogboekitem bijwerken mislukt`,statuses:{completed:`Voltooid`,failed:`Mislukt`,stopped:`Gestopt`,cancelled:`Geannuleerd`,skipped:`Overgeslagen`}}},dispatchToast:{untitled:`Afdruktaak`,startingPrints:`Afdrukken starten`,progressSummary:`{{complete}}/{{total}} voltooid • Verwerken: {{processing}}`,expandDetails:`Verzenddetails uitklappen`,collapseDetails:`Verzenddetails inklappen`,awaitingPrinter:`Wachten op printer…`,status:{processing:`Verwerken`,completed:`Voltooid`,failed:`Mislukt`},failed:{generic:`Verzenden mislukt`,upload_failed:`Uploaden naar printer mislukt`,start_command_failed:`Printer heeft startopdracht geweigerd`},dismiss:`Negeren`},pipelineRuns:{title:`Pipeline-runs`,loading:`Laden…`,empty:`Nog geen pipeline-runs.`,filter:{pipeline:`Pipeline`,status:`Status`,target:`Doel`,all:`Alle`,allPipelines:`Alle pipelines`,allStatus:`Alle statussen`,allTargets:`Alle doelen`,clear:`Filters wissen`,noMatches:`Geen runs komen overeen met de huidige filters.`},totalCount_one:`{{n}} run`,totalCount_other:`{{n}} runs`,copies:`{{n}} kopieën`,failedCount:`{{n}} mislukt`,copyN:`Kopie {{n}}`,retryFailed:`Mislukte opnieuw proberen`,retryOf:`herhaling van #{{n}}`,pagination:`{{start}}–{{end}} van {{total}}`,cancelledByUser:`Geannuleerd door gebruiker`,toast:{cancelled:`Run geannuleerd`,cancelFailed:`Annuleren mislukt`,retryStarted:`Opnieuw proberen gestart`,retryFailed:`Mislukte opnieuw proberen`,cleared:`{{n}} runs gewist`,clearFailed:`Wissen mislukt`},clearLog:`Logboek wissen`,clearConfirmTitle:`Logboek wissen?`,clearConfirmBody:`Alle voltooide, mislukte, geannuleerde en gedeeltelijk mislukte pipeline-runs verwijderen? Lopende runs blijven behouden. Dit kan niet ongedaan worden gemaakt.`,clearConfirmAction:`Wissen`,jobStatus:{pending:`in afwachting`,awaiting_printer:`wachten op printer`,queued:`in wachtrij`,printing:`bezig met afdrukken`,completed:`voltooid`,failed:`mislukt`,cancelled:`geannuleerd`}},queue:{title:`Afdrukwachtrij`,subtitle:`Plan en beheer je afdruktaken`,filamentShort:{rowBadge:`Onvoldoende filament op de toegewezen spoel`,rowTooltip:`De verzendscheduler heeft dit item gemarkeerd. Klik op Afspelen om het tekort per sleuf te bekijken en te bepalen of je toch wilt afdrukken.`,confirmTitle:`Onvoldoende filament`,confirmIntro:`De toegewezen spoel kan minstens één sleuf niet voorzien. Toch afdrukken?`,lineItem:`Sleuf {{slot}}: vereist {{required}} g, {{remaining}} g resterend`,unknown:`onbekend`,printAnyway:`Toch afdrukken`},slicerAmsMapping:{rowBadge:`AMS-sleuven opgeslagen voor deze printer`,rowTooltip:`Dit archief bevat de exacte AMS-sleuven die de slicer heeft gekozen, opgeslagen voor de printer waarop dit item is gericht. Bij opnieuw afdrukken op deze printer kunnen die trays worden hergebruikt in plaats van opnieuw op type en kleur te matchen.`},editQueueItem:`Wachtrij-item bewerken`,selectAllPlates:`Alle {{count}} platen selecteren`,deselectAll:`Alles deselecteren`,printQueued:`Afdruk in wachtrij geplaatst`,printQueuedWillStartWhenIdle:`Start zodra de printer inactief is`,itemsQueued:`{{count}} items in wachtrij`,sending:`Verzenden...`,sendingProgress:`{{current}}/{{total}} verzenden...`,adding:`Toevoegen...`,addingProgress:`{{current}}/{{total}} toevoegen...`,savingProgress:`{{current}}/{{total}} opslaan...`,clearQueue:`Wachtrij wissen`,clearHistory:`Geschiedenis wissen`,emptyQueue:`Wachtrij is leeg`,position:`Positie`,scheduledTime:`Geplande tijd`,moveUp:`Omhoog verplaatsen`,moveDown:`Omlaag verplaatsen`,startNow:`Nu starten`,printingInProgress:`Afdrukken bezig...`,viewArchive:`Archief bekijken`,viewInFileManager:`Bekijken in Bestandsbeheer`,itemCount:`{{count}} item`,itemCount_plural:`{{count}} items`,dragToReorder:`Sleep om volgorde te wijzigen (alleen ZSM)`,reorderHint:`Positie heeft alleen invloed op ZSM-items. Geplande items draaien op hun ingestelde tijd.`,sjf:{label:`SJF`,tooltip:`Shortest Job First — scheduler geeft voorrang aan kortere afdrukken`},addedBy:`Toegevoegd door {{name}}`,nextInQueue:`Volgende in wachtrij`,clearPlateSuccess:`Plaat vrijgegeven — klaar voor volgende afdruk`,plateNumber:`Plaat {{index}}`,quantity:`Aantal`,quantityHint:`Maakt {{count}} wachtrij-items`,plateQuantityLabel:`Runs van {{plate}}`,plateQuantityTotal_one:`{{count}} run in totaal`,plateQuantityTotal_other:`{{count}} runs in totaal`,batchOrders:{title:`Batchorders`,emptyTitle:`Geen batchorders`,emptyDescription:`Plaats een bestand met meerdere platen, of meer dan één kopie van een plaat, in de wachtrij en de order verschijnt hier met de voortgang.`,filter:{active:`Actief`,completed:`Voltooid`,cancelled:`Geannuleerd`,all:`Alle`},status:{active:`Actief`,completed:`Voltooid`,cancelled:`Geannuleerd`},noTargets:`Alleen groepering`,noTargetsHint:`Aangemaakt voordat doelen per plaat bestonden, dus dit volgt de runs die in de wachtrij zijn gezet in plaats van een doel.`,dispatchRemaining:`{{count}} resterende in wachtrij plaatsen`,dispatchPlate:`Resterende in wachtrij plaatsen`,strandedPlate:`Geen instellingen meer om van te kopiëren`,strandedNotice:`Kan {{runs}} van de {{owed}} nog openstaande runs niet in de wachtrij zetten: die plaat heeft geen run in de wachtrij of voltooide run meer om instellingen van te kopiëren. Zet de plaat één keer vanuit het bestand in de wachtrij, of annuleer de order.`,dispatched:`Resterende runs voor {{name}} in wachtrij geplaatst`,plateProgress:`{{completed}} van {{target}} klaar`,remaining:`{{count}} nog te doen`,failed:`{{count}} mislukt`,printing:`{{count}} bezig met afdrukken`,wholeFile:`Hele bestand`,due:`Vervalt {{date}}`,costSoFar:`{{amount}} tot nu toe`,costRemaining:`({{amount}} te gaan)`},activeBatches:`Actieve batches`,batchProgress:`{{completed}} van {{total}} voltooid`,cancelBatch:`Resterende annuleren`,batchCancelled:`Resterende batchitems geannuleerd`,cancelBatchConfirmTitle:`Batch annuleren`,cancelBatchConfirmMessage:`Alle resterende openstaande items in deze batch annuleren?`,batch:{defaultName:`Batch`,label:`{{count}} item`,label_plural:`{{count}} items`,pendingCount:`{{count}} in afwachting`,pendingCount_plural:`{{count}} in afwachting`,expand:`Batch uitklappen`,collapse:`Batch inklappen`,groupAsBatch:`Als batch groeperen…`,groupAsBatchDescription:`Combineer de {{count}} geselecteerde items tot één inklapbare batch.`,nameLabel:`Batchnaam`,namePlaceholder:`bijv. Vrijdagcadeaus`,create:`Batch maken`,ungroup:`Groepering opheffen`,ungroupConfirmTitle:`Batchgroepering opheffen?`,ungroupConfirmMessage:`De items blijven in de wachtrij staan, maar worden niet langer als groep weergegeven.`,dragGroup:`Groep slepen`},tabs:{batches:`Batches`,queue:`Wachtrij`,history:`Geschiedenis`,timeline:`Tijdlijn`,pipelines:`Pipelines`},layout:{flatList:`Lijst`,byPrinter:`Per printer`,groupByPrinter:`Groeperen per printer`},history:{emptyTitle:`Nog geen geschiedenis`,emptyDescription:`Voltooide, geannuleerde en mislukte afdrukken verschijnen hier.`,showMore:`Meer tonen`,showingCount:`{{shown}} van {{total}} weergegeven`},dragGhost:{multiCount:`{{count}} items`,batch:`{{name}} ({{count}} kopie)`,batch_plural:`{{name}} ({{count}} kopieën)`},sections:{currentlyPrinting:`Momenteel aan het afdrukken`,queued:`In wachtrij`,history:`Geschiedenis`},status:{pending:`In afwachting`,waiting:`Wachten`,printing:`Bezig met afdrukken`,paused:`Gepauzeerd`,completed:`Voltooid`,failed:`Mislukt`,skipped:`Overgeslagen`,cancelled:`Geannuleerd`},summary:{printing:`Bezig met afdrukken`,queued:`In wachtrij`,totalTime:`Totale wachtrijtijd`,totalWeight:`Totaal wachtrijgewicht`,history:`Geschiedenis`},filter:{allPrinters:`Alle printers`,unassigned:`Niet toegewezen`,allStatus:`Alle statussen`,allLocations:`Alle locaties`,any:`Elke`},sort:{byPosition:`Sorteren op positie`,byName:`Sorteren op naam`,byPrinter:`Sorteren op printer`,bySchedule:`Sorteren op planning`,byDate:`Sorteren op datum`,ascendingOldest:`Oplopend (oudste eerst)`,descendingNewest:`Aflopend (nieuwste eerst)`},badges:{staged:`Gereed voor handmatige start`,requiresPrevious:`Vereist dat vorige taak slaagt`,autoPowerOff:`Automatisch uitschakelen`,gcodeInjection:`G-code`},empty:{title:`Geen afdrukken gepland`,description:`Plan een afdruk vanaf de pagina Archieven met de optie "Plannen" in het contextmenu, of sleep bestanden hierheen om te beginnen.`},time:{etaIfStartedNow:`Voltooiingstijd als deze taak nu zou starten`,whenFree:`Zodra een printer vrij is`,overdue:`Te laat`,now:`Nu`,lessThanMinute:`Binnen een minuut`,inMinutes:`Over {{count}} min`,inHours:`Over {{count}} uur`},actions:{startPrint:`Afdruk starten`,stopPrint:`Afdruk stoppen`,requeue:`Opnieuw in wachtrij plaatsen`},bulkEdit:{title:`{{count}} item bewerken`,title_plural:`{{count}} items bewerken`,description:`Alleen gewijzigde instellingen worden toegepast op de geselecteerde items.`,printer:`Printer`,noChange:`— Geen wijziging —`,queueOptions:`Wachtrijopties`,staged:`Gereed voor handmatige start`,autoPowerOff:`Automatisch uitschakelen na afdruk`,requirePrevious:`Vereis dat vorige taak slaagt`,gcodeInjection:`G-code injecteren`,printOptions:`Afdrukopties`,bedLevelling:`Bednivellering`,flowCalibration:`Flowkalibratie`,vibrationCalibration:`Trillingskalibratie`,layerInspection:`Inspectie eerste laag`,timelapse:`Timelapse`,useAms:`AMS gebruiken`,nozzleOffsetCali:`Nozzle-offsetkalibratie`,applyChanges:`Wijzigingen toepassen`,selectAll:`Alles selecteren`,deselectAll:`Alles deselecteren`,selected:`{{count}} geselecteerd`,editSelected:`Geselecteerde bewerken`,cancelSelected:`Geselecteerde annuleren`},confirm:{cancelTitle:`Geplande afdruk annuleren`,cancelMessage:`Weet je zeker dat je "{{name}}" wilt annuleren?`,stopTitle:`Afdruk stoppen`,stopMessage:`Weet je zeker dat je de huidige afdruk "{{name}}" wilt stoppen? Hiermee wordt de afdruktaak op de printer geannuleerd.`,removeTitle:`Uit geschiedenis verwijderen`,removeMessage:`Weet je zeker dat je "{{name}}" uit de wachtrijgeschiedenis wilt verwijderen?`,clearHistoryTitle:`Geschiedenis wissen`,clearHistoryMessage:`Weet je zeker dat je alle {{count}} item(s) uit de geschiedenis wilt verwijderen?`,cancelButton:`Afdruk annuleren`,stopButton:`Afdruk stoppen`,thisPrint:`deze afdruk`,thisItem:`dit item`},toast:{cancelled:`Wachtrij-item geannuleerd`,cancelFailed:`Item annuleren mislukt`,removed:`Wachtrij-item verwijderd`,keptForOrder:`Geannuleerd in plaats van verwijderd: dit is de enige run waaruit de batchorder deze plaat opnieuw in de wachtrij kan zetten`,historyKeptForOrders:`{{kept}} bewaard die batchorders nog nodig hebben.`,removeFailed:`Item verwijderen mislukt`,stopped:`Afdruk gestopt`,stopFailed:`Afdruk stoppen mislukt`,released:`Afdruk vrijgegeven aan wachtrij`,startFailed:`Afdruk starten mislukt`,reorderFailed:`Wachtrij herschikken mislukt`,historyCleared:`{{count}} geschiedenisitem(s) gewist`,clearHistoryFailed:`Geschiedenis wissen mislukt`,updateFailed:`Items bijwerken mislukt`,bulkCancelled:`{{count}} item(s) geannuleerd`,bulkCancelFailed:`Items annuleren mislukt`,batchCreated:`Batch "{{name}}" gemaakt`,batchCreateFailed:`Batch maken mislukt`,batchUngrouped:`Groepering van {{count}} item(s) opgeheven`,batchUngroupFailed:`Batchgroepering opheffen mislukt`,resumedAfterFailure:`Wachtrij hervat — {{restored}} taak/taken teruggezet naar in afwachting`,resumeAfterFailureFailed:`Wachtrij hervatten mislukt`},resumeAfterFailure:{banner:`{{printer}} is geblokkeerd door een eerdere afdrukfout — {{count}} taak/taken overgeslagen`,bannerHint:`Los het printerprobleem op en hervat daarna om de overgeslagen taken terug te zetten en de blokkering op te heffen.`,button:`Hervatten na fout`,confirmTitle:`Wachtrij hervatten na fout?`,confirmMessage:`Zet {{count}} overgeslagen taak/taken op {{printer}} terug naar in afwachting en hef de blokkering door de vorige afdruk op. Zorg dat de printer gereed is voordat je doorgaat.`},timeline:{listView:`Lijst`,timelineView:`Tijdlijn`,unassigned:`Niet toegewezen`,noData:`Geen geplande afdrukken voor deze dag`,nothingCommitted:`Geen vastgelegde planningen in dit venster. Gereedstaande items, wachtende items en ZSM-taken op inactieve printers worden niet getoond — stel een geplande tijd in of geef een gereedstaand item vrij om het hier te zien.`,allDoneBy:`Alle afdrukken naar verwachting klaar om {{time}}`,staged:`Gereed voor handmatige start`,filterAll:`Alles tonen`,filterPrinting:`Bezig met afdrukken`,filterQueued:`In wachtrij`,time:{anyMoment:`elk moment`,minutesLeft:`{{minutes}}m resterend`,hoursLeft:`{{hours}}u resterend`,hoursMinutesLeft:`{{hours}}u {{minutes}}m resterend`},day:{previous:`Vorige dag`,next:`Volgende dag`,today:`Vandaag`},window:{back12h:`12 uur terug`,forward12h:`12 uur vooruit`,now:`Nu`},printerColumnHeader:`Printer`},permissions:{noStopPrint:`Je hebt geen toestemming om afdrukken te stoppen`,noStartPrint:`Je hebt geen toestemming om afdrukken te starten`,noEdit:`Je hebt geen toestemming om dit wachtrij-item te bewerken`,noCancel:`Je hebt geen toestemming om dit wachtrij-item te annuleren`,noRequeue:`Je hebt geen toestemming om items opnieuw in de wachtrij te plaatsen`,noRemove:`Je hebt geen toestemming om dit wachtrij-item te verwijderen`,noClearHistory:`Je hebt geen toestemming om de volledige geschiedenis te wissen`,noEditItems:`Je hebt geen toestemming om wachtrij-items te bewerken`,noCancelItems:`Je hebt geen toestemming om wachtrij-items te annuleren`}},stats:{title:`Statistieken`,subtitle:`Sleep widgets om ze opnieuw te rangschikken. Klik op het oogpictogram om te verbergen.`,overview:`Overzicht`,totalPrints:`Totaal aantal afdrukken`,successRate:`Slagingspercentage`,totalPrintTime:`Totale afdruktijd`,printTime:`Afdruktijd`,totalFilament:`Totaal filamentverbruik`,filamentUsed:`Filament gebruikt`,filamentCost:`Filamentkosten`,totalCost:`Totale kosten`,energyUsed:`Energieverbruik`,energyCost:`Energiekosten`,energyWarmingUpTooltip:`Energietracking verzamelt nog steeds uurlijkse momentopnamen. Totalen over een datumbereik worden nauwkeurig zodra er minstens één momentopname van vóór het geselecteerde bereik bestaat. Vroege waarden kunnen te laag uitvallen.`,averagePrintTime:`Gemiddelde afdruktijd`,printsPerDay:`Afdrukken per dag`,byPrinter:`Per printer`,printsByPrinter:`Afdrukken per printer`,byMaterial:`Per materiaal`,byMonth:`Per maand`,last7Days:`Laatste 7 dagen`,last30Days:`Laatste 30 dagen`,last90Days:`Laatste 90 dagen`,allTime:`Altijd`,quickStats:`Snelle statistieken`,printActivity:`Afdrukactiviteit`,filamentTypes:`Filamenttypen`,filamentTrends:`Filamenttrends`,failureAnalysis:`Foutenanalyse`,timeAccuracy:`Tijdnauwkeurigheid`,successful:`Geslaagd:`,failed:`Mislukt:`,cancelled:`Geannuleerd:`,perfectEstimate:`100% = perfecte schatting`,noTimeAccuracyData:`Nog geen gegevens over tijdnauwkeurigheid`,noFilamentData:`Geen filamentgegevens beschikbaar`,noPrinterData:`Geen printergegevens beschikbaar`,noPrintData:`Geen afdrukgegevens beschikbaar`,noPrintDataLast30Days:`Geen afdrukgegevens in de laatste 30 dagen`,failureReasons:`Oorzaken van fouten`,topFailureReasons:`Meest voorkomende foutoorzaken`,failedPrintsCount:`{{failed}} / {{total}} afdrukken mislukt`,lastWeekRate:`Vorige week: {{rate}}%`,resetLayout:`Indeling resetten`,recalculateCosts:`Kosten opnieuw berekenen`,recalculateCostsHint:`Alle archiefkosten opnieuw berekenen met de huidige filamentprijzen`,exportStats:`Statistieken exporteren`,exportAsCsv:`Exporteren als CSV`,exportAsExcel:`Exporteren als Excel`,hiddenCount:`{{count}} verborgen`,exportDownloaded:`Export gedownload`,exportFailed:`Export mislukt`,layoutReset:`Indeling gereset`,recalculatedCosts:`Kosten voor {{count}} archieven opnieuw berekend`,recalculateFailed:`Kosten opnieuw berekenen mislukt`,loadingStats:`Statistieken laden...`,noPermissionResetLayout:`Je hebt geen toestemming om de indeling te resetten`,noPermissionRecalculate:`Je hebt geen toestemming om kosten opnieuw te berekenen`,noPrintDataInRange:`Geen afdrukgegevens in het geselecteerde bereik`,periodFilament:`Filament in periode`,periodCost:`Kosten in periode`,avgPerPrint:`Gem. per afdruk`,usageOverTime:`Verbruik in de tijd`,energyOverTime:`Energie in de tijd`,filamentByWeight:`Gewicht`,printDuration:`Afdrukduur`,printerUtilization:`Printerbenutting`,filamentSuccess:`Succes per materiaal`,printHabits:`Afdrukgewoonten`,printTimeOfDay:`Afdruktijdstip`,colorDistribution:`Kleurverdeling`,noColorData:`Geen kleurgegevens beschikbaar`,records:`Records`,longestPrint:`Langste afdruk`,heaviestPrint:`Zwaarste afdruk`,mostExpensivePrint:`Duurste`,busiestDay:`Drukste dag`,successStreak:`Succesreeks`,streakPrint:`opeenvolgende afdruk`,streakPrints:`{{count}} opeenvolgende afdrukken`,printerStats:`Printerstatistieken`,hours:`uren`,avgPrints:`Gem. afdrukken`,noArchiveData:`Geen afdrukgegevens beschikbaar`,filamentByTime:`Tijd`,avgWeight:`Gem. gewicht`,avgTime:`Gem. tijd`,filamentByPrints:`Afdrukken`,timeframe:{today:`Vandaag`,"this-week":`Deze week`,"this-month":`Deze maand`,"last-7":`Laatste 7 dagen`,"last-30":`Laatste 30 dagen`,"last-90":`Laatste 90 dagen`,"this-year":`Dit jaar`,"all-time":`Altijd`,custom:`Aangepast bereik`,from:`Van`,to:`Tot`},allUsers:`Alle gebruikers`,noUser:`Geen gebruiker (systeem)`,filterByUser:`Filteren op gebruiker`},maintenance:{title:`Onderhoud`,overview:`Overzicht`,allOk:`Al het onderhoud is bijgewerkt`,dueCount:`{{count}} item te doen`,dueCount_plural:`{{count}} items te doen`,warningCount:`{{count}} waarschuwing`,warningCount_plural:`{{count}} waarschuwingen`,totalPrintTime:`Totale afdruktijd`,nextMaintenance:`Volgend onderhoud`,nothingDue:`Niets te doen`,tasks:`Taken`,lastPerformed:`Laatst uitgevoerd`,interval:`Interval`,hoursRemaining:`{{hours}}u resterend`,hoursOverdue:`{{hours}}u te laat`,markDone:`Als voltooid markeren`,performMaintenance:`Onderhoud uitvoeren`,history:`Geschiedenis`,noHistory:`Geen onderhoudsgeschiedenis`,editPrintHours:`Afdrukuren bewerken`,currentHours:`Huidige uren`,statusTab:`Status`,settingsTab:`Instellingen`,overdueCount:`{{count}} te laat`,dueSoonCount:`{{count}} binnenkort te doen`,dueSoon:`Binnenkort te doen`,allGood:`Alles goed`,overdueBy:`{{duration}} te laat`,dueIn:`Over {{duration}} te doen`,timeLeft:`{{duration}} resterend`,day:`1 dag`,days:`{{count}} dagen`,week:`1 week`,weeks:`{{count}} weken`,month:`1 maand`,months:`{{count}} maanden`,year:`1 jaar`,maintenanceTypes:`Onderhoudstypen`,maintenanceTypesDescription:`Systeemtaken en je aangepaste onderhoudstaken`,addCustomType:`Aangepast type toevoegen`,restoreDefaults:`Standaardtaken herstellen`,intervalType:`Intervaltype`,intervalValue:`Interval ({{type}})`,icon:`Pictogram`,documentationLink:`Documentatielink (optioneel)`,assignToPrinters:`Aan printers toewijzen`,selectAtLeastOnePrinter:`Selecteer minstens één printer`,addType:`Type toevoegen`,custom:`Aangepast`,printHours:`Afdrukuren`,calendarDays:`Kalenderdagen`,exampleName:`bijv. HEPA-filter vervangen`,viewDocumentation:`Documentatie bekijken`,timeBasedInterval:`Tijdsgebaseerd interval`,intervalOverrides:`Intervaloverschrijvingen`,intervalOverridesDescription:`Intervallen aanpassen voor specifieke printers`,assignedToPrinters:`Toegewezen aan printers:`,noPrintersAssigned:`Geen printers toegewezen`,addPrinterShort:`Toevoegen:`,printersAssignedClick:`{{count}} printer(s) toegewezen - klik om te beheren`,removeFromPrinter:`Van deze printer verwijderen`,types:{lubricateCarbonRods:`Koolstofstaven smeren`,lubricateRails:`Lineaire rails smeren`,cleanNozzle:`Nozzle/hotend reinigen`,checkBelts:`Riemspanning controleren`,cleanBuildPlate:`Bouwplaat reinigen`,checkExtruder:`Extrudertandwielen controleren`,checkCooling:`Koelventilatoren controleren`,generalInspection:`Algemene inspectie`,cleanCarbonRods:`Koolstofstaven reinigen`,lubricateSteelRods:`Stalen staven smeren`,cleanSteelRods:`Stalen staven reinigen`,cleanLinearRails:`Lineaire rails reinigen`,checkPtfeTube:`PTFE-buis controleren`,replaceHepaFilter:`HEPA-filter vervangen`,replaceCarbonFilter:`Koolstoffilter vervangen`,lubricateLeftNozzleRail:`Linker nozzle-rail smeren`},maintenanceComplete:`Onderhoud als voltooid gemarkeerd`,typeUpdated:`Onderhoudstype bijgewerkt`,typeDeleted:`Onderhoudstype verwijderd`,defaultsRestored:`{{count}} standaardtaak/taken hersteld`,printHoursUpdated:`Afdrukuren bijgewerkt`,printerAssigned:`Printer toegewezen`,printerRemoved:`Printer verwijderd`,deleteTypeConfirm:`"{{name}}" verwijderen?`,deleteSystemTypeTitle:`Standaard onderhoudstaak verwijderen?`,deleteSystemTypeMessage:`Weet je zeker dat je de standaard onderhoudstaak "{{name}}" wilt verwijderen?`,noPermissionUpdate:`Je hebt geen toestemming om onderhoudsitems bij te werken`,noPermissionPerform:`Je hebt geen toestemming om onderhoud uit te voeren`,noPermissionEditTypes:`Je hebt geen toestemming om onderhoudstypen te bewerken`,noPermissionDeleteTypes:`Je hebt geen toestemming om onderhoudstypen te verwijderen`,noPermissionEditHours:`Je hebt geen toestemming om afdrukuren te bewerken`,noPermissionRemovePrinter:`Je hebt geen toestemming om printertoewijzingen te verwijderen`,noPermissionAssignPrinter:`Je hebt geen toestemming om printers toe te wijzen`,noPermissionEditIntervals:`Je hebt geen toestemming om intervallen te bewerken`,configureSettings:`Onderhoudstypen en intervallen configureren`},settings:{sliceEngine:`Slice-engine`,sliceEngineSidecar:`Server-sidecar`,sliceEngineSidecarHint:`Slicen gebeurt op de server, in de slicer-sidecarcontainer.`,sliceEngineBrowser:`In browser`,sliceEngineBrowserHint:`Slicen gebeurt op dit apparaat, zonder tussenkomst van de server.`,title:`Instellingen`,general:`Algemeen`,tabs:{general:`Algemeen`,smartPlugs:`Slimme stekkers`,sensors:`Sensoren`,notifications:`Meldingen`,queue:`Workflow`,queueDispatch:`Wachtrij en verzending`,queuePipelines:`Pipelines`,filament:`Filament`,network:`Netwerk`,apiKeys:`API-sleutels`,virtualPrinter:`Virtuele printer`,spoolbuddy:`SpoolBuddy`,failureDetection:`Foutdetectie`,users:`Authenticatie`,backup:`Back-up`,emailAuth:`E-mailauthenticatie`,ldap:`LDAP`,twoFa:`Tweefactorauthenticatie`,oidc:`SSO / OIDC`,security:`Beveiliging`},spoolbuddy:{infoTitle:`SpoolBuddy-apparaten`,infoBody:`SpoolBuddy-kiosken registreren zichzelf automatisch via heartbeat. Registreer een apparaat hier af als het niet meer wordt gebruikt of als een verouderde duplicaatregistratie is achtergebleven na een daemoncrash.`,duplicatesTitle:`{{count}} apparaten geregistreerd`,duplicatesBody:`Alleen het eerst geregistreerde apparaat wordt gebruikt door de kioskinterface. Als een van deze apparaten een verouderd duplicaat na een crash is, registreer het dan af — een online apparaat registreert zichzelf opnieuw bij de volgende heartbeat.`,empty:`Nog geen SpoolBuddy-apparaten geregistreerd.`,online:`Online`,offline:`Offline`,unregister:`Registratie opheffen`,unregisterSuccess:`Apparaat afgemeld`,unregisterError:`Apparaat afmelden mislukt`,confirmTitle:`SpoolBuddy-apparaat afmelden?`,confirmBody:`Hiermee wordt "{{hostname}}" ({{deviceId}}) uit de database verwijderd. Als het apparaat online is, registreert het zichzelf opnieuw bij de volgende heartbeat.`,ipAddress:`IP-adres`,firmware:`Firmware`,lastSeen:`Laatst gezien`,daemonUptime:`Daemon-uptime`,systemUptime:`Systeem-uptime`,never:`nooit`,nfc:`NFC`,scale:`Weegschaal`,cpuTemp:`CPU-temp.`,cpuLoad:`CPU-belasting`,memory:`Geheugen`,disk:`Schijf`,update:`Bijwerken`,updateConfirmTitle:`SpoolBuddy-daemon bijwerken?`,updateConfirmBody:`Een software-update starten op "{{hostname}}"? De daemon wordt opnieuw gestart zodra de update is toegepast.`,restartBrowser:`Browser herstarten`,restartBrowserConfirmTitle:`Kioskbrowser herstarten?`,restartBrowserConfirmBody:`De kioskbrowser op "{{hostname}}" herstarten? Het scherm wordt kort zwart.`,restartDaemon:`Daemon herstarten`,restartDaemonConfirmTitle:`SpoolBuddy-daemon herstarten?`,restartDaemonConfirmBody:`De SpoolBuddy-daemon op "{{hostname}}" herstarten? Het apparaat is enkele seconden offline.`,reboot:`Opnieuw opstarten`,rebootConfirmTitle:`Apparaat opnieuw opstarten?`,rebootConfirmBody:`"{{hostname}}" opnieuw opstarten? Het apparaat is ongeveer een minuut offline.`,shutdown:`Afsluiten`,shutdownConfirmTitle:`Apparaat afsluiten?`,shutdownConfirmBody:`"{{hostname}}" afsluiten? Je hebt fysieke toegang nodig om het weer in te schakelen.`,commandConfirm:`Bevestigen`,commandQueued:`Opdracht in wachtrij geplaatst`,commandError:`Opdracht verzenden mislukt`},ldap:{title:`LDAP-authenticatie`,enabledDesc:`LDAP-authenticatie is ingeschakeld`,disabledDesc:`LDAP-authenticatie is uitgeschakeld`,disabledHint:`Configureer en sla de LDAP-instellingen hieronder op en schakel daarna in.`,enabled:`LDAP-authenticatie ingeschakeld`,disabled:`LDAP-authenticatie uitgeschakeld`,feature1:`Gebruikers kunnen inloggen met LDAP-inloggegevens`,feature2:`Lokaal beheerdersaccount blijft beschikbaar als terugvaloptie`,feature3:`LDAP-groepen worden bij inloggen gekoppeld aan BamBuddy-groepen`,serverConfig:`LDAP-serverconfiguratie`,serverUrl:`Server-URL`,serverUrlHint:`Gebruik ldaps:// voor SSL of ldap:// met StartTLS`,security:`Beveiliging`,securityHint:`StartTLS zet een gewone verbinding om naar TLS. LDAPS gebruikt TLS vanaf het begin.`,bindDn:`Bind-DN (serviceaccount)`,bindPassword:`Bind-wachtwoord`,searchBase:`Zoekbasis-DN`,userFilter:`Gebruikerszoekfilter`,userFilterHint:`{username} wordt vervangen door de inloggebruikersnaam. Gebruik (uid={username}) voor OpenLDAP.`,advanced:`Geavanceerd`,autoProvision:`Gebruikers automatisch aanmaken`,autoProvisionHint:`Automatisch een BamBuddy-account maken bij de eerste LDAP-login`,defaultGroup:`Standaardgroep`,defaultGroupNone:`— Geen (geen terugval) —`,defaultGroupHint:`Terugvalgroep die wordt toegewezen wanneer een LDAP-gebruiker zich authenticeert maar niet voorkomt in een gekoppelde LDAP-groep. Laat leeg om niet-gekoppelde gebruikers zonder machtigingen te laten.`,groupMapping:`Groepskoppeling (JSON)`,groupMappingHint:`Koppel LDAP-groep-DN's aan BamBuddy-groepen. Beschikbare groepen: `,testConnection:`Verbinding testen`,settingsSaved:`LDAP-instellingen opgeslagen`,errors:{serverRequired:`LDAP-server-URL is verplicht`,searchBaseRequired:`Zoekbasis-DN is verplicht`,enableAuthFirst:`Schakel authenticatie eerst in`,configureLdapFirst:`Sla de LDAP-instellingen eerst op`}},email:{smtpSettings:`SMTP-configuratie`,smtpHost:`SMTP-server`,smtpPort:`SMTP-poort`,security:`Beveiliging`,authentication:`Authenticatie`,username:`Gebruikersnaam`,password:`Wachtwoord`,fromEmail:`Afzender-e-mail`,fromName:`Afzendernaam`,testConnection:`SMTP-verbinding testen`,testRecipient:`E-mailadres testontvanger`,sendTest:`Testmail verzenden`,sending:`Verzenden...`,save:`Instellingen opslaan`,saving:`Opslaan...`,advancedAuth:`Geavanceerde authenticatie`,advancedAuthEnabled:`Geavanceerde authenticatie is ingeschakeld`,advancedAuthEnabledDesc:`E-mailgebaseerde functies voor gebruikersbeheer zijn actief. Nieuwe gebruikers ontvangen automatisch gegenereerde wachtwoorden per e-mail en gebruikers kunnen hun wachtwoord resetten via de functie Wachtwoord vergeten.`,advancedAuthDisabled:`Geavanceerde authenticatie is uitgeschakeld`,advancedAuthDisabledDesc:`Schakel geavanceerde authenticatie in om e-mailgebaseerde functies voor gebruikersbeheer te activeren.`,enable:`Inschakelen`,disable:`Uitschakelen`,feature1:`Wachtwoorden worden automatisch gegenereerd en naar nieuwe gebruikers gemaild`,feature2:`Gebruikers kunnen inloggen met gebruikersnaam of e-mailadres`,feature3:`De functie Wachtwoord vergeten is beschikbaar`,feature4:`Beheerders kunnen gebruikerswachtwoorden via e-mail resetten`,errors:{requiredFields:`Vul alle verplichte velden in`,usernameRequired:`Gebruikersnaam is verplicht wanneer authenticatie is ingeschakeld`,enterTestEmail:`Voer een test-e-mailadres in`,smtpServerAndEmail:`Vul SMTP-server en Afzender-e-mail in voordat je test`,usernamePasswordRequired:`Gebruikersnaam en wachtwoord zijn verplicht wanneer authenticatie is ingeschakeld`,configureSmtpFirst:`Configureer en test eerst de SMTP-instellingen`,enableAuthFirst:`Schakel authenticatie eerst in om e-mailfuncties te gebruiken.`},success:{settingsSaved:`SMTP-instellingen succesvol opgeslagen`},securityOptions:{starttls:`STARTTLS (poort 587)`,ssl:`SSL/TLS (poort 465)`,none:`Geen (poort 25)`},authOptions:{enabled:`Ingeschakeld`,disabled:`Uitgeschakeld`}},appearance:`Uiterlijk`,notifications:`Meldingen`,smartPlugs:`Slimme stekkers`,spoolman:`Spoolman`,updates:`Updates`,language:`Taal`,languageDescription:`Selecteer je voorkeurstaal`,theme:`Thema`,themeLight:`Licht`,themeDark:`Donker`,themeSystem:`Systeem`,defaultView:`Standaardweergave`,defaultViewDescription:`Pagina die wordt getoond bij het openen van de app`,checkForUpdates:`Controleren op updates`,autoUpdate:`Automatisch bijwerken`,currentVersion:`Huidige versie`,latestVersion:`Nieuwste versie`,upToDate:`Je bent up-to-date`,updateAvailable:`Update beschikbaar`,notificationLanguage:`Taal voor meldingen`,notificationLanguageDescription:`Taal voor pushmeldingen`,bedCooledThreshold:`Drempel voor afgekoeld bed`,bedCooledThresholdDescription:`Temperatuur waaronder het bed na een afdruk als afgekoeld wordt beschouwd`,userNotificationsEnabled:`Gebruikersmeldingen`,userNotificationsEnabledDescription:`Schakel het gebruikersmeldingenmenu en e-mailmeldingen voor afdrukgebeurtenissen in. Vereist Geavanceerde authenticatie.`,userNotificationsDisabledHint:`Schakel Geavanceerde authenticatie in om gebruikersmeldingen te gebruiken.`,notificationProviders:`Meldingsproviders`,addProvider:`Provider toevoegen`,editProvider:`Provider bewerken`,providerType:`Providertype`,testNotification:`Testmelding`,testSuccess:`Testmelding succesvol verzonden`,testFailed:`Testmelding verzenden mislukt`,quietHours:`Stille uren`,quietHoursDescription:`Niet storen tijdens deze uren`,quietHoursStart:`Start`,quietHoursEnd:`Einde`,events:{title:`Meldingsgebeurtenissen`,printStart:`Afdruk gestart`,printComplete:`Afdruk voltooid`,printFailed:`Afdruk mislukt`,printStopped:`Afdruk gestopt`,printProgress:`Voortgangsmijlpalen`,printProgressDescription:`Melden bij 25%, 50%, 75%`,printerOffline:`Printer offline`,printerError:`Printerfout`,filamentLow:`Weinig filament`,maintenanceDue:`Onderhoud nodig`,maintenanceDueDescription:`Melden wanneer onderhoud nodig is`},smartPlug:{title:`Slimme stekkers`,add:`Slimme stekker toevoegen`,edit:`Slimme stekker bewerken`,name:`Naam`,ipAddress:`IP-adres`,linkedPrinter:`Gekoppelde printer`,autoOn:`Automatisch inschakelen`,autoOnDescription:`Inschakelen wanneer afdruk start`,autoOff:`Automatisch uitschakelen`,autoOffDescription:`Uitschakelen nadat afdruk is voltooid`,offDelay:`Uitschakelvertraging`,offDelayMinutes:`Minuten na afdruk`,offDelayTemp:`Wanneer nozzle onder temperatuur is`,currentState:`Huidige status`,turnOn:`Inschakelen`,turnOff:`Uitschakelen`},filamentTracking:`Filamenttracking`,filamentTrackingDesc:`Kies hoe je filamentspoelen wilt bijhouden. Je kunt de ingebouwde voorraad gebruiken of een externe Spoolman-server koppelen.`,autoAddUnknownRfid:`Onbekende RFID-spoelen automatisch toevoegen`,autoAddUnknownRfidDesc:`Maak automatisch een voorraaditem wanneer een spoel met een onbekende RFID-tag wordt gedetecteerd. Schakel dit uit als je nieuwe spoelen handmatig vooraf registreert om duplicaten te voorkomen.`,filamentChecks:`Filamentcontroles`,disableFilamentWarnings:`Filamentwaarschuwingen uitschakelen`,disableFilamentWarningsDesc:`Geen waarschuwingen tonen over onvoldoende filament bij afdrukken of in wachtrij plaatsen`,preferLowestFilament:`Voorkeur voor laagste resterende hoeveelheid filament`,preferLowestFilamentDesc:`Als meerdere spoelen overeenkomen, gebruik dan de spoel met de minste resterende hoeveelheid filament`,preferLowestFilamentBackupNote:`Dit werkt alleen wanneer AMS Filament Backup op de printer is ingeschakeld — anders kan de printer niet overschakelen naar een tweede spoel wanneer de gekozen spoel leeg raakt.`,trackingModeBuiltIn:`Ingebouwde voorraad`,trackingModeBuiltInDesc:`Automatische RFID-koppeling en verbruikstracking inbegrepen`,trackingModeSpoolmanDesc:`Externe filamentbeheerserver`,builtInFeatureRfid:`Detecteert automatisch Bambu Lab RFID-spoelen in AMS`,builtInFeatureUsage:`Houdt filamentverbruik per afdruk bij`,builtInFeatureCatalog:`Spoelen, kleuren en K-factorprofielen beheren`,builtInFeatureThirdParty:`Spoelen van derden kunnen aan voorraadspoelen worden toegewezen`,amsSyncButton:`Gewichten synchroniseren vanuit AMS`,amsSyncTitle:`Spoelgewichten synchroniseren vanuit AMS`,amsSyncMessage:`Hiermee worden alle gewichten van voorraadspoelen overschreven met de huidige AMS remain%-waarden van verbonden printers. Gebruik dit om beschadigde gewichtsgegevens te herstellen. Printers moeten online zijn.`,amsSyncing:`Synchroniseren...`,amsSyncSuccess:`{{synced}} spoel(en) gesynchroniseerd, {{skipped}} overgeslagen`,amsSyncError:`Gewichten synchroniseren vanuit AMS mislukt`,spoolmanAmsSyncButton:`Spoolman-gewichten synchroniseren vanuit AMS`,spoolmanAmsSyncTitle:`Spoolman-spoelgewichten synchroniseren vanuit AMS`,spoolmanAmsSyncMessage:`Hiermee worden alle Spoolman-spoelgewichten bijgewerkt op basis van de huidige AMS remain%-waarden van verbonden printers. Printers moeten online zijn.`,spoolmanAmsSyncing:`Synchroniseren...`,spoolmanAmsSyncSuccess:`{{synced}} spoel(en) gesynchroniseerd, {{skipped}} overgeslagen`,spoolmanAmsSyncError:`Spoolman-gewichten synchroniseren vanuit AMS mislukt`,spoolmanAmsSyncErrorUnreachable:`Spoolman-gewichten synchroniseren mislukt (Spoolman niet bereikbaar)`,spoolmanAmsSyncErrorNotConfigured:`Spoolman-gewichten synchroniseren mislukt (Spoolman niet geconfigureerd)`,spoolmanNotConfigured:`Spoolman niet geconfigureerd`,spoolmanFilamentCatalogTitle:`Spoolman-filamentcatalogus`,spoolmanFilamentCatalogDesc:`Filamentnamen en taragewichten uit je Spoolman-instantie. Naam en spoelgewicht zijn hier bewerkbaar; alle andere eigenschappen worden rechtstreeks in Spoolman beheerd.`,spoolmanUrl:`Spoolman-URL`,spoolmanUrlHint:`URL van je Spoolman-server (bijv. http://localhost:7912)`,spoolmanConnected:`Verbonden`,spoolmanDisconnected:`Niet verbonden`,status:`Status`,connect:`Verbinden`,disconnect:`Verbinding verbreken`,howSyncWorks:`Hoe synchronisatie werkt`,syncInfoRfidOnly:`Alleen officiële Bambu Lab-spoelen met RFID worden gesynchroniseerd`,syncInfoAutoCreate:`Nieuwe spoelen worden bij de eerste synchronisatie automatisch in Spoolman aangemaakt`,syncInfoThirdPartySkipped:`Niet-Bambu Lab-spoelen (derden, hervuld) worden overgeslagen`,linkingExistingSpools:`Bestaande spoelen koppelen`,linkingExistingSpoolsDesc:`Om bestaande Spoolman-spoelen aan je AMS te koppelen, beweeg je over een AMS-sleuf en klik je op "Koppelen aan Spoolman".`,syncMode:`Synchronisatiemodus`,syncModeAuto:`Automatisch`,syncModeManual:`Alleen handmatig`,syncModeAutoDesc:`AMS-gegevens worden automatisch gesynchroniseerd wanneer wijzigingen worden gedetecteerd`,syncModeManualDesc:`Alleen synchroniseren wanneer handmatig gestart`,syncAmsData:`AMS-gegevens synchroniseren`,syncAmsDataDesc:`Printer-AMS-gegevens handmatig synchroniseren met Spoolman`,allPrinters:`Alle printers`,noDefaultPrinter:`Geen standaard (elke keer vragen)`,sidebarOrder:`Volgorde zijbalk`,saveThumbnails:`Miniaturen opslaan`,captureFinishPhoto:`Eindfoto vastleggen`,noPrintersConfigured:`Geen printers geconfigureerd`,archiveMode:{always:`Altijd archiefitem maken`,never:`Nooit archiefitem maken`,ask:`Elke keer vragen`},checkForUpdatesLabel:`Controleren op updates`,checkPrinterFirmware:`Printerfirmware controleren`,includeBetaUpdates:`Bètaversies opnemen`,includeBetaUpdatesDesc:`Melden over bèta- en prereleaseversies bij controle op updates`,localLogin:{disable:`Lokale login met gebruikersnaam/wachtwoord uitschakelen`,disableHint:`Wanneer ingeschakeld kunnen alleen SSO-providers inloggen. LDAP blijft onaangetast. Stel BAMBUDDY_LOCAL_LOGIN=true in op de server om een herstelmogelijkheid te behouden.`},enableRetry:`Opnieuw proberen inschakelen`,homeAssistantDescription:`Slimme stekkers bedienen via Home Assistant`,environmentManagedLabel:`(Omgevingsvariabele beheerd)`,autoEnabledViaEnv:`Automatisch ingeschakeld via omgevingsvariabelen`,urlFromEnvReadOnly:`Waarde ingesteld door omgevingsvariabele HA_URL (alleen-lezen)`,tokenFromEnvReadOnly:`Waarde ingesteld door omgevingsvariabele HA_TOKEN (alleen-lezen)`,mqttConnectedTo:`Verbonden met`,prometheusDescription:`Printergegevens beschikbaar stellen in Prometheus-formaat`,noSmartPlugsTitle:`Geen slimme stekkers geconfigureerd`,noSmartPlugsDescription:`Voeg een slimme stekker op basis van Tasmota toe om energieverbruik te volgen en stroomregeling te automatiseren.`,noProvidersTitle:`Geen providers geconfigureerd`,noProvidersDescription:`Voeg een provider toe om waarschuwingen te ontvangen.`,noTemplatesAvailable:`Geen sjablonen beschikbaar. Start de backend opnieuw om standaardsjablonen aan te maken.`,apiPermissionView:`Printerstatus en wachtrij bekijken`,apiPermissionEdit:`Items toevoegen aan en verwijderen uit de afdrukwachtrij`,apiKeysEmptyTitle:`Geen API-sleutels`,apiKeysEmptyDescription:`Maak een API-sleutel om te integreren met externe services.`,noUsersFound:`Geen gebruikers gevonden`,noGroupsFound:`Geen groepen gevonden`,noGroupsAvailable:`Geen groepen beschikbaar`,passwordsDoNotMatch:`Wachtwoorden komen niet overeen`,systemGroupWarning:`Namen van systeemgroepen kunnen niet worden gewijzigd`,authDisabledTitle:`Authenticatie is uitgeschakeld`,authDisabledFeature1:`Login vereisen voor toegang tot het systeem`,authDisabledFeature2:`Meerdere gebruikers maken met groepsgebaseerde machtigingen`,authDisabledFeature3:`Toegang regelen met meer dan 50 gedetailleerde machtigingen`,userHasCreated:`Deze gebruiker heeft gemaakt:`,userItemsQuestion:`Wat wil je met deze items doen?`,deleteUserConfirm:`Weet je zeker dat je deze gebruiker wilt verwijderen?`,actionCannotBeUndone:`Deze actie kan niet ongedaan worden gemaakt.`,addFirstSmartPlug:`Je eerste slimme stekker toevoegen`,providers:`Providers`,log:`Logboek`,testAll:`Alles testen`,testResults:`Testresultaten`,testPassedCount:`{{count}} geslaagd`,testFailedCount:`{{count}} mislukt`,messageTemplates:`Berichtsjablonen`,messageTemplatesDescription:`Meldingsberichten voor elke gebeurtenis aanpassen.`,apiKeys:`API-sleutels`,apiKeysDescription:`API-sleutels maken voor externe integraties en webhooks.`,createKey:`Sleutel maken`,apiKeyCreated:`API-sleutel succesvol gemaakt`,apiKeyCopyWarning:`Kopieer deze sleutel nu - hij wordt niet opnieuw getoond!`,useInApiBrowser:`Gebruiken in API-browser`,apiKeyQrButton:`QR-code`,apiKeyQrTitle:`Scannen om te configureren`,apiKeyQrCaption:`Scan met je mobiele app om deze server en API-sleutel toe te voegen.`,apiKeyQrWarning:`Bevat je geheime API-sleutel — deel deze niet en maak geen screenshot waar anderen hem kunnen zien.`,createNewApiKey:`Nieuwe API-sleutel maken`,keyName:`Sleutelnaam`,keyNamePlaceholder:`bijv. Home Assistant, OctoPrint`,readStatus:`Status lezen`,readStatusDescription:`Printerstatus, wachtrij, bibliotheek, archieven en slicerpipelines bekijken`,manageQueue:`Wachtrij beheren`,manageQueueDescription:`Items toevoegen aan en verwijderen uit de afdrukwachtrij. Met Bibliotheek beheren kun je slicerpipelines uitvoeren`,controlPrinter:`Printer bedienen`,controlPrinterDescription:`Afdrukken pauzeren, hervatten en stoppen`,manageLibrary:`Bibliotheek beheren`,manageLibraryDescription:`Bibliotheekbestanden uploaden, hernoemen, verwijderen en slicen; modellen importeren uit MakerWorld. Met Wachtrij beheren kun je slicerpipelines uitvoeren`,manageInventory:`Voorraad beheren`,manageInventoryDescription:`Spoelen en voorraadrecords maken, bijwerken en verwijderen. Vereist voor SpoolBuddy-kiosken (NFC-scan, weegschaalmetingen, kiosksysteemopdrachten).`,manageMaintenance:`Onderhoud beheren`,manageMaintenanceDescription:`Voltooid onderhoud registreren, tellers resetten, intervallen bewerken en de catalogus met onderhoudstypen beheren. Geschikt voor Home Assistant-automatiseringen die bijvoorbeeld registreren "Ik heb de nozzle gereinigd" zonder bredere printerbediening toe te staan.`,manageArchives:`Archieven beheren`,manageArchivesDescription:`Afdrukarchieven bewerken en verwijderen, inclusief oude afdrukken en hun bijdrage aan statistieken. Geschikt voor automatiseringen die de afdrukgeschiedenis opschonen.`,manageProjects:`Projecten beheren`,manageProjectsDescription:`Projecten maken, bijwerken en verwijderen en archieven eraan toevoegen. Geschikt voor automatiseringen die afdrukken in projecten organiseren.`,libraryBadge:`Bibliotheek`,inventoryBadge:`Voorraad`,maintenanceBadge:`Onderhoud`,archivesBadge:`Archieven`,projectsBadge:`Projecten`,cloudAccess:`Cloudtoegang toestaan`,cloudAccessDescription:`Bambu Cloud-presets en filamenten namens jou lezen. Vereist dat je bent ingelogd bij Bambu Cloud.`,cloudBadge:`Cloud`,updateEnergyCost:`Elektriciteitsprijs bijwerken`,updateEnergyCostDescription:`Sta toe dat deze sleutel via POST een nieuwe elektriciteitsprijs per kWh naar /settings/electricity-price stuurt. Handig voor Home Assistant-automatiseringen met dynamische tarieven (Tibber, Octopus, enz.). Dit is het enige instellingenveld dat via een API-sleutel schrijfbaar is.`,energyCostBadge:`Energie`,legacyKey:`Verouderd`,legacyKeyTooltip:`Aangemaakt vóór eigendom per gebruiker; maak opnieuw om cloudtoegang te gebruiken`,unnamedKey:`Naamloze sleutel`,lastUsed:`Laatst gebruikt`,read:`Lezen`,control:`Bedienen`,createFirstKey:`Je eerste sleutel maken`,webhookEndpoints:`Webhook-eindpunten`,webhookApiKeyHint:`Gebruik je API-sleutel in de X-API-Key-header.`,webhook:{getAllStatus:`Status van alle printers ophalen`,getSpecificStatus:`Status van specifieke printer ophalen`,addToQueue:`Toevoegen aan afdrukwachtrij`,pausePrint:`Afdruk pauzeren`,resumePrint:`Afdruk hervatten`,stopPrint:`Afdruk stoppen`},apiBrowser:`API-browser`,apiBrowserDescription:`Alle beschikbare API-eindpunten verkennen en testen.`,apiKeyForTesting:`API-sleutel voor testen`,apiKeyPlaceholder:`Plak hier je API-sleutel om geauthenticeerde eindpunten te testen...`,apiKeyHint:`Deze sleutel wordt als X-API-Key-header met verzoeken meegestuurd.`,deleteApiKeyTitle:`API-sleutel verwijderen`,deleteApiKeyMessage:`Weet je zeker dat je deze API-sleutel wilt verwijderen? Integraties die deze sleutel gebruiken stoppen dan met werken.`,deleteKey:`Sleutel verwijderen`,amsDisplayThresholds:`AMS-weergavedrempels`,amsThresholdsDescription:`Kleurdrempels voor AMS-indicatoren voor luchtvochtigheid en temperatuur configureren.`,humidity:`Luchtvochtigheid`,goodGreen:`Goed (groen)`,fairOrange:`Redelijk (oranje)`,aboveFairBad:`Boven de redelijke drempel wordt rood (slecht) weergegeven`,fairAlsoDryingThreshold:`Deze drempel wordt ook gebruikt om automatisch drogen te starten wanneer dit is ingeschakeld`,fairBelowDryingFloor:`Automatisch drogen kan deze waarde niet bereiken: een AMS leest {{floor}}% of hoger terwijl de verwarming draait, waardoor elke cyclus direct zou eindigen en opnieuw starten. Verhoog dit tot boven {{floor}}% als automatisch drogen is ingeschakeld.`,temperature:`Temperatuur`,goodBlue:`Goed (blauw)`,aboveFairHot:`Boven de redelijke drempel wordt rood (heet) weergegeven`,tempAlarmThreshold:`Alarm boven`,tempAlarmSeparateFromBand:`Alleen de alarmdrempel verstuurt meldingen — Goed en Redelijk kleuren de weergave. Laat het leeg om te alarmeren bij de drempel Redelijk, zoals voorheen.`,tempAlarmMustBePositive:`Een drempel van 0 of lager wordt genegeerd — het alarm valt terug op de drempel Redelijk.`,historyRetention:`Bewaartermijn geschiedenis`,keepSensorHistory:`Sensorgeschiedenis bewaren gedurende`,historyRetentionDescription:`Oudere gegevens over luchtvochtigheid en temperatuur worden automatisch verwijderd`,defaultPrintOptions:`Standaard afdrukopties`,defaultPrintOptionsDescription:`Stel standaardwaarden in voor afdrukopties bij het starten van nieuwe afdrukken. Deze kunnen per afdruk in het afdrukdialoogvenster worden overschreven.`,defaultBedLevelling:`Bednivellering`,defaultBedLevellingDesc:`Bed automatisch nivelleren voor afdruk`,defaultFlowCali:`Flowkalibratie`,defaultFlowCaliDesc:`Extrusieflow kalibreren`,defaultVibrationCali:`Trillingskalibratie`,defaultVibrationCaliDesc:`Ringing-artefacten verminderen`,defaultLayerInspect:`Inspectie eerste laag`,defaultLayerInspectDesc:`AI-inspectie van de eerste laag`,defaultTimelapse:`Timelapse`,defaultTimelapseDesc:`Timelapsevideo opnemen`,defaultNozzleOffsetCali:`Nozzle-offsetkalibratie`,defaultNozzleOffsetCaliDesc:`Nozzle-offsets tussen extruders kalibreren`,tempFanPresetsTitle:`Voorinstellingen temperatuur en ventilator`,tempFanPresetsDescription:`Pas de snelkeuzewaarden aan die worden weergegeven in pop-overs voor temperatuur en ventilatorsnelheid op printerkaarten. De knop Uit wordt altijd weergegeven.`,tempFanPresetsNozzle:`Nozzletemperatuur`,tempFanPresetsBed:`Bedtemperatuur`,tempFanPresetsChamber:`Kamertemperatuur`,tempFanPresetsFan:`Ventilatorsnelheid`,tempFanPresetsReset:`Standaardwaarden herstellen`,concurrentUploadsTitle:`Gelijktijdige uploads`,concurrentUploadsDescription:`Hoeveel printers de wachtrij tegelijk bestanden mag sturen. Printers ontvangen bestanden langzaam (een grote afdruk kan enkele minuten duren) en elke printer wacht op zijn beurt — bij een groter printerpark voorkomt een hogere waarde dat de laatste printer in een batch op alle eerdere overdrachten moet wachten. Verlaag dit als je netwerk of Bambuddy-host moeite heeft met parallelle overdrachten.`,concurrentUploadsLabel:`Printers tegelijk uploaden`,concurrentUploadsHelp:`1 verstuurt naar één printer tegelijk (het oude gedrag). Standaard is 4.`,staggeredStart:`Gespreide start`,staggeredStartDescription:`Standaard groepsgrootte en interval bij gespreid starten van batches over meerdere printers. Kan per batch in het afdrukvenster worden overschreven.`,preheatTitle:`Voorverwarmen en warmtestabilisatie`,preheatDescription:`Verwarm het bed (en de kamer, indien ondersteund) en houd de temperatuur vast voordat elke afdruk uit de wachtrij start. Handig voor technische filamenten (PA, ABS) op printers zonder actieve kamerverwarming — het bed verwarmt de kamer via straling terwijl de stabilisatietimer loopt. Het beddoel wordt uit het afdrukbestand gelezen; kamerwerking hangt af van het printermodel.`,preheatEnabled:`Voorverwarmen en stabiliseren inschakelen`,preheatEnabledDesc:`Wanneer uitgeschakeld worden afdrukken uit de wachtrij direct verzonden. Elk wachtrij-item kan dit per afdruk overschrijven.`,preheatFilamentTargetsLabel:`Kamerdoel per filament (°C)`,preheatFilamentTargetsHint:`Bambuddy kiest het hoogste doel van de geladen AMS-sleuven. Een afdruk waarvan alle sleuven 0 opleveren — PLA, PETG, TPU, PVA — slaat het voorverwarmen volledig over en start meteen.`,preheatFilamentTargetsReset:`Standaardwaarden herstellen`,preheatFilamentTargetsDefaultRow:`Overig / niet gekoppeld`,preheatMaxWait:`Max. wachttijd (seconden)`,preheatMaxWaitHelp:`Maximale duur van de opwarmfase van de kamer voordat wordt doorgegaan.`,preheatSoak:`Stabiliseren (seconden)`,preheatSoakHelp:`Wachttijd nadat het doel is bereikt of de maximale wachttijd is verstreken.`,preheatHardwareTitle:`Gedrag per printer:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E verwarmen de kamer actief via M141. X1C/P2S lezen de kamertemperatuur maar vertrouwen op stralingswarmte van het bed. P1S/P1P/A1/A1 Mini hebben geen kamersensor — alleen de stabilisatietimer is van toepassing.`,preheatPerItemDesc:`Verwarm bed en kamer voordat deze afdruk start. Standaard wordt de globale schakelaar Instellingen → Workflow gebruikt.`,preheatOverride_inherit:`Overnemen`,preheatOverride_on:`Aan`,preheatOverride_off:`Uit`,calibrationMode_off:`Uit`,calibrationMode_on:`Aan`,calibrationMode_auto:`Auto`,preheatTargetOverride:`Kamerdoel overschrijven (°C, leeg = filamentstandaard)`,preheatTargetOverrideHelp:`0 verwarmt het bed en voert het doorwarmen uit zonder kamer. Laat het leeg en een afdruk zonder kamerbehoefte slaat het voorverwarmen volledig over.`,plateClear:`Bevestiging plaat vrij`,requirePlateClear:`Bevestiging vereisen dat plaat vrij is`,requirePlateClearDescription:`Wanneer ingeschakeld wacht de scheduler op een bevestiging per printer dat de plaat vrij is voordat afdrukken uit de wachtrij starten op printers met voltooide taken. Als je dit uitschakelt, worden ook de plaatstatusbadge en de knop "Plaat als leeg markeren" op printerkaarten verborgen.`,keepBedWarm:`Bed warm houden tussen afdrukken`,keepBedWarmDesc:`Tijdens het wachten op het vrijgeven van de plaat wordt het bed op de onderstaande warmhoudtemperatuur gehouden zodat de kamer warm blijft — of op de eigen bedtemperatuur van de volgende afdruk als die hoger is. Alleen van toepassing wanneer de volgende afdruk kamerverwarming nodig heeft (ASA, ABS, PA, PC enz.). Vereist dat bevestiging plaat vrij is ingeschakeld.`,keepWarmBedTemp:`Warmhoudtemperatuur bed (°C)`,keepWarmBedTempHelp:`Wordt gebruikt wanneer het bed de kamer moet verwarmen — tijdens warmhouden en bij voorverwarmen wanneer het afdrukbestand geen bedtemperatuur bevat. Een hogere bedtemperatuur uit het afdrukbestand heeft altijd voorrang.`,keepWarmMaxMinutes:`Warmhouden stoppen na (minuten)`,keepWarmMaxMinutesHelp:`Als de plaat binnen deze tijd niet is vrijgegeven, worden de verwarmingselementen uitgeschakeld in plaats van onbeperkt warm gehouden.`,gcodeInjection:`G-code-injectie`,gcodeInjectionDescription:`Configureer aangepaste G-code die aan het begin en/of einde van afdrukken wordt ingevoegd voor automatische afdruksystemen zoals Farmloop, SwapMod, AutoClear en Printflow 3D. Fragmenten worden per printermodel ingesteld en toegepast wanneer "G-code injecteren" is ingeschakeld op een wachtrij-item.`,gcodeInjectionNoPrinters:`Geen printers gevonden. Voeg printers toe om G-codefragmenten te configureren.`,gcodeStartLabel:`Start-G-code`,gcodeEndLabel:`Eind-G-code`,gcodeStartPlaceholder:`G-code die vóór de start van de afdruk wordt toegevoegd...`,gcodeEndPlaceholder:`G-code die na afloop van de afdruk wordt toegevoegd...`,staggerGroupSize:`Groepsgrootte`,staggerGroupSizeHelp:`Aantal printers dat per groep gelijktijdig start`,staggerInterval:`Interval (minuten)`,staggerIntervalHelp:`Vertraging tussen het starten van elke groep`,queueDrying:`Automatisch drogen in wachtrij`,queueDryingDescription:`Droog AMS-filament automatisch wanneer de printer tussen afdrukken in de wachtrij inactief is. Gebruikt de bovenstaande luchtvochtigheidsdrempel om het drogen te starten.`,queueDryingEnabled:`Automatisch drogen inschakelen`,queueDryingEnabledDescription:`Start AMS-drogen automatisch wanneer de printer inactief is en de luchtvochtigheid boven de drempel ligt`,queueDryingBlock:`Wachten tot drogen is voltooid`,queueDryingBlockDescription:`Blokkeer de afdrukwachtrij tot het drogen is voltooid. Wanneer uitgeschakeld hebben afdrukken voorrang op drogen.`,ambientDryingEnabled:`Drogen zonder wachtrij`,ambientDryingEnabledDescription:`Droog filament automatisch op inactieve printers wanneer de luchtvochtigheid boven de drempel komt, ook zonder afdrukken in de wachtrij.`,printDryingEnabled:`Doorgaan met drogen tijdens afdrukken`,printDryingEnabledDescription:`Sta toe dat automatisch drogen tijdens een afdruk blijft draaien op ondersteunde hardware (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L met recente firmware). De droogtemperatuur wordt automatisch begrensd op 5°C onder de inactieve preset om spoelen te beschermen.`,dryingPresets:`Droogpresets`,dryingPresetsDescription:`Temperatuur en duur per filamenttype. AMS 2 Pro gebruikt lagere temperaturen, AMS-HT ondersteunt hogere temperaturen.`,dryingFilament:`Filament`,humidityThresholds:`Luchtvochtigheidsdrempels`,humidityThresholdsDescription:`Luchtvochtigheidsdrempel per filament voor automatisch drogen en alarmen. Bij gemengde lading in één AMS wordt de laagste drempel gebruikt.`,humidityThresholdCol:`Drempel`,humidityThresholdDefault:`Standaard (onbekende typen)`,printModal:`Afdrukvenster`,expandCustomMapping:`Aangepaste toewijzing standaard uitklappen`,expandCustomMappingDescription:`Bij afdrukken naar meerdere printers de AMS-toewijzing per printer uitgeklapt tonen`,authentication:`Authenticatie`,authEnabledDescription:`Je instantie is beveiligd met gebruikersauthenticatie`,authDisabledDescription:`Schakel in om inloggen te vereisen en gebruikerstoegang te beheren`,authDisabledMessage:`Schakel authenticatie in om gebruikersaccounts te maken, machtigingen te beheren en je Bambuddy-instantie te beveiligen.`,enableAuthentication:`Authenticatie inschakelen`,currentUser:`Huidige gebruiker`,changePassword:`Wachtwoord wijzigen`,admin:`Beheerder`,users:`Gebruikers`,addUser:`Gebruiker toevoegen`,groups:`Groepen`,addGroup:`Groep toevoegen`,system:`Systeem`,noDescription:`Geen beschrijving`,userCount:`{{count}} gebruikers`,permissionCount:`{{count}} machtigingen`,createUser:`Gebruiker maken`,username:`Gebruikersnaam`,enterUsername:`Voer gebruikersnaam in`,password:`Wachtwoord`,enterPassword:`Voer wachtwoord in`,passwordRequirements:`Minstens 8 tekens, met één hoofdletter, één kleine letter, één cijfer en één speciaal teken.`,confirmPassword:`Wachtwoord bevestigen`,confirmPasswordPlaceholder:`Bevestig wachtwoord`,viewReleaseOnGitHub:`Release bekijken op GitHub`,turnAllPlugsOn:`Alle stekkers inschakelen`,turnAllPlugsOff:`Alle stekkers uitschakelen`,clearNotificationLogs:`Meldingslogboeken wissen`,clearLogsMessage:`Hiermee worden alle meldingslogboeken ouder dan 30 dagen permanent verwijderd. Deze actie kan niet ongedaan worden gemaakt.`,clearLogs:`Logboeken wissen`,resetUiPreferences:`UI-voorkeuren resetten`,resetUiPreferencesMessage:`Hiermee worden alle UI-voorkeuren teruggezet naar de standaardwaarden: volgorde zijbalk, thema, dashboardindeling, weergavemodi en sorteervoorkeuren. Je printers, archieven en serverinstellingen worden NIET beïnvloed. De pagina wordt na het wissen opnieuw geladen.`,resetPreferences:`Voorkeuren resetten`,deleteGroupTitle:`Groep verwijderen`,deleteGroupMessage:`Weet je zeker dat je deze groep wilt verwijderen? Gebruikers in deze groep verliezen deze machtigingen.`,deleteGroup:`Groep verwijderen`,disableAuthenticationTitle:`Authenticatie uitschakelen`,disableAuthenticationMessage:`Weet je zeker dat je authenticatie wilt uitschakelen? Hierdoor wordt je Bambuddy-instantie toegankelijk zonder login. Alle gebruikers blijven in de database, maar authenticatie wordt uitgeschakeld.`,disableAuthentication:`Authenticatie uitschakelen`,configureBambuddy:`Bambuddy configureren`,systemDefault:`Systeemstandaard`,archiveSettings:`Archiefinstellingen`,newWindow:`Nieuw venster`,embeddedOverlay:`Ingebedde overlay`,preferredSlicer:`Voorkeursslicer`,preferredSlicerDescription:`Slicer die wordt gebruikt voor slicen in de app via de API-sidecar`,openInSlicerLabel:`Openen in slicer`,openInSlicerInherit:`Zelfde als API-slicer`,openInSlicerDescription:`Desktop-slicer die wordt gebruikt door de knop 'Openen in slicer'. Laat op 'Zelfde als API-slicer' staan om deze over te nemen, of kies een andere slicer voor lokaal gebruik.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev heeft bekende CLI-bugs die het slicen van veel door Bambu gemaakte 3MF's blokkeren — zie upstream issues #12426 (segfault bij gekleurde multi-extruderbestanden) en #13386 (afwijzing door strikte validatie van parameterbereik). Bambu Studio wordt aanbevolen tot de upstream fixes beschikbaar zijn.`,useSlicerApi:`Slicer-API gebruiken`,useSlicerApiDescription:`Wanneer ingeschakeld openen acties "Slicen" het slicervenster in de app en roepen ze de slicer-API-sidecar aan. Wanneer uitgeschakeld (standaard) worden ze via een URI-schema aan de desktopslicer doorgegeven.`,slicerCard:`Slicer`,orcaslicerApiUrl:`OrcaSlicer-sidecar-URL`,bambuStudioApiUrl:`Bambu Studio-sidecar-URL`,slicerStallTimeout:`Time-out slicerstagnatie (minuten)`,slicerStallTimeoutDescription:`Stop een slice na deze tijd als er geen voortgang van de sidecar is. Zware modellen die voortgang blijven melden worden nooit afgebroken, hoe lang ze ook duren. Sidecars die geen voortgang melden gebruiken dit in plaats daarvan als totale tijdslimiet.`,slicerApiUrlDescription:`URL van de slicer-API-sidecarcontainer. Laat leeg om de standaardwaarden van de omgevingsvariabelen SLICER_API_URL / BAMBU_STUDIO_API_URL te gebruiken.`,externalCameras:`Externe camera's`,costTracking:`Kostentracking`,billingEnabled:`Facturering inschakelen`,billingEnabledDescription:`Gebruikers kosten voor afdrukken in rekening brengen en financiële functies inschakelen`,printerKillSwitch:`Noodstop ongeautoriseerde afdruk`,printerKillSwitchDescription:`Stop afdrukken direct wanneer ze zonder autorisatie starten.`,financeBudgetReset:`Maandelijkse reset financieel budget`,financeBudgetResetDay:`Resetdag`,financeBudgetResetDayHelp:`Voor korte maanden wordt op de laatste dag van de maand gereset.`,financeBudgetResetTimezone:`Tijdzone voor reset`,financeBudgetResetTimezoneHelp:`Start van budgetperiode wordt in deze tijdzone berekend.")`,rebuildLedger:`Portemonnee-grootboek opnieuw opbouwen`,rebuildLedgerStarted:`Opnieuw opbouwen van grootboek gestart`,rebuildLedgerConfirmTitle:`Portemonnee-grootboek opnieuw opbouwen?`,rebuildLedgerConfirmMessage:`Hiermee wordt het portemonnee-grootboek opnieuw opgebouwd om historische saldowaarden te herstellen. Voer dit alleen uit als je weet wat je doet.`,rebuildLedgerInProgress:`Opnieuw opbouwen starten...`,printsOnly:`Alleen afdrukken`,totalConsumption:`Totaal verbruik`,dataManagement:`Gegevensbeheer`,storageUsage:`Opslaggebruik`,storageUsageDescription:`Verdeling van gegevensgebruik per categorie`,storageUsageTotal:`Totaal`,storageUsageErrors:`Fouten`,storageUsageOtherBreakdown:`Overig (inclusief statische assets, scripts en configuratiebestanden)`,storageUsageSystem:`Systeem`,storageUsageData:`Gegevens`,storageUsageUnavailable:`Informatie over opslaggebruik niet beschikbaar`,clearNotificationLogsDescription:`Meldingslogboeken ouder dan 30 dagen verwijderen`,resetUiPreferencesDescription:`Reset volgorde zijbalk, thema, weergavemodi en indelingsvoorkeuren. Printers, archieven en instellingen worden niet beïnvloed.`,enableHomeAssistant:`Home Assistant inschakelen`,enableMqtt:`MQTT inschakelen`,useTls:`TLS gebruiken`,enableMetricsEndpoint:`Metrics-eindpunt inschakelen`,availableMetrics:`Beschikbare metrics`,editUser:`Gebruiker bewerken`,deleteUserTitle:`Gebruiker verwijderen`,groupName:`Groepsnaam`,leaveEmptyForAnonymous:`Laat leeg voor anoniem`,leaveEmptyForNoAuth:`Laat leeg voor geen authenticatie`,enterNewPassword:`Voer nieuw wachtwoord in`,confirmNewPassword:`Bevestig nieuw wachtwoord`,enterGroupName:`Voer groepsnaam in`,enterDescriptionOptional:`Voer beschrijving in (optioneel)`,enterCurrentPassword:`Voer huidig wachtwoord in`,enterNewPasswordMin6:`Voer nieuw wachtwoord in (min. 6 tekens)`,toast:{keyCopied:`Sleutel naar klembord gekopieerd`,copyFailed:`Sleutel kopiëren mislukt`,keyAddedToBrowser:`Sleutel toegevoegd aan API-browser`,clearLogsFailed:`Logboeken wissen mislukt`,uiPreferencesReset:`UI-voorkeuren gereset. Vernieuwen...`,authDisabled:`Authenticatie succesvol uitgeschakeld`,authDisableFailed:`Authenticatie uitschakelen mislukt`,apiKeyCreated:`API-sleutel gemaakt`,apiKeyDeleted:`API-sleutel verwijderd`,userCreated:`Gebruiker succesvol gemaakt`,userUpdated:`Gebruiker succesvol bijgewerkt`,userDeleted:`Gebruiker succesvol verwijderd`,groupCreated:`Groep succesvol gemaakt`,groupUpdated:`Groep succesvol bijgewerkt`,groupDeleted:`Groep succesvol verwijderd`,fillRequiredFields:`Vul alle verplichte velden in`,passwordsDoNotMatch:`Wachtwoorden komen niet overeen`,passwordTooShort:`Wachtwoord moet minstens 8 tekens bevatten`,passwordNeedsUppercase:`Wachtwoord moet minstens één hoofdletter bevatten`,passwordNeedsLowercase:`Wachtwoord moet minstens één kleine letter bevatten`,passwordNeedsDigit:`Wachtwoord moet minstens één cijfer bevatten`,passwordNeedsSpecial:`Wachtwoord moet minstens één speciaal teken bevatten`,enterGroupName:`Voer een groepsnaam in`,settingsSaved:`Instellingen opgeslagen`,noPermissionUpdate:`Je hebt geen toestemming om instellingen te wijzigen`,cameraSettingsSaved:`Camera-instellingen opgeslagen`,enterCameraUrl:`Voer een camera-URL in`,passwordChanged:`Wachtwoord succesvol gewijzigd`,connectionFailed:`Verbinding mislukt`,testFailed:`Test mislukt`,cameraConnected:`Camera verbonden{{resolution}}`,cameraConnectedCoalesced:`Camera verbonden{{resolution}} (gedeeld met een opname die al draait)`},testConnection:`Verbinding testen`,catalog:{spoolCatalog:`Spoelcatalogus`,spoolCatalogDescription:`Lege spoelgewichten per merk/type. Gebruikt voor automatisch opzoeken van gewicht bij het toevoegen van spoelen.`,searchCatalog:`Catalogus zoeken...`,addNewEntry:`Nieuw item toevoegen`,namePlaceholder:`Naam (bijv. Bambu Lab - Plastic)`,weight:`Gewicht`,type:`Type`,default:`Standaard`,custom:`Aangepast`,noMatch:`Geen items komen overeen met je zoekopdracht`,empty:`Geen items in catalogus`,deleteEntry:`Item verwijderen`,deleteConfirm:`Weet je zeker dat je "{{name}}" wilt verwijderen?`,resetCatalog:`Catalogus resetten`,resetConfirm:`Catalogus terugzetten naar standaardwaarden? Hiermee worden alle aangepaste items verwijderd.`,loadFailed:`Spoelcatalogus laden mislukt`,nameWeightRequired:`Naam en gewicht zijn verplicht`,entryAdded:`Item toegevoegd`,addFailed:`Item toevoegen mislukt`,entryUpdated:`Item bijgewerkt`,updateFailed:`Item bijwerken mislukt`,entryDeleted:`Item verwijderd`,deleteFailed:`Item verwijderen mislukt`,resetSuccess:`Catalogus teruggezet naar standaardwaarden`,resetFailed:`Catalogus resetten mislukt`,exported:`{{count}} items geëxporteerd`,imported:`{{added}} items geïmporteerd ({{skipped}} overgeslagen)`,importFailed:`Importeren mislukt: ongeldig JSON-formaat`,exportTooltip:`Catalogus exporteren naar JSON`,importTooltip:`Catalogus importeren uit JSON`,resetTooltip:`Standaardwaarden herstellen`,selectedCount:`{{count}} geselecteerd`,deleteSelected:`Geselecteerde verwijderen`,bulkDeleteConfirm:`Weet je zeker dat je {{count}} items wilt verwijderen?`,bulkDeleted:`{{count}} items verwijderd`,bulkDeleteFailed:`Items verwijderen mislukt`,material:`Materiaal`,spoolWeight:`Spoelgewicht`,color:`Kleur`,updateSpoolWeight:`Spoelgewicht bijwerken`,filamentUpdated:`Filament bijgewerkt`,filamentUpdateFailed:`Filament bijwerken mislukt`,filamentUpdateInvalid:`Ongeldige filamentgegevens`,keepExistingSpoolWeight:`Oud gewicht behouden voor bestaande spoelen`,keepExistingSpoolWeightDesc:`Spoelen die al met dit filamenttype zijn gemaakt behouden het oude taragewicht. Nieuwe spoelen gebruiken de bijgewerkte waarde.`,applyToAllSpools:`Toepassen op alle spoelen`,applyToAllSpoolsDesc:`Alle gewichtsberekeningen voor dit filamenttype gebruiken direct het nieuwe taragewicht.`},colorCatalog:{title:`Kleurcatalogus`,description:`Filamentkleuren per fabrikant/materiaal. Gebruikt voor automatisch opzoeken van kleur bij het toevoegen van spoelen.`,searchColors:`Kleuren zoeken...`,allManufacturers:`Alle fabrikanten`,addNewColor:`Nieuwe kleur toevoegen`,manufacturer:`Fabrikant`,colorName:`Kleurnaam`,hex:`Hex`,materialOptional:`Materiaal (optioneel)`,showing:`{{filtered}} van {{total}} kleuren weergegeven`,noMatch:`Geen kleuren komen overeen met je zoekopdracht`,empty:`Geen kleuren in catalogus`,deleteColor:`Kleur verwijderen`,deleteConfirm:`Weet je zeker dat je "{{name}}" wilt verwijderen?`,resetCatalog:`Kleurcatalogus resetten`,resetConfirm:`Catalogus terugzetten naar standaardwaarden? Hiermee worden alle aangepaste kleuren verwijderd.`,sync:`Synchroniseren`,starting:`Starten...`,syncTooltip:`Synchroniseren vanaf FilamentColors.xyz (2000+ kleuren, kan een minuut duren)`,loadFailed:`Kleurcatalogus laden mislukt`,fieldsRequired:`Fabrikant, kleurnaam en hexkleur zijn verplicht`,colorAdded:`Kleur toegevoegd`,addFailed:`Kleur toevoegen mislukt`,colorUpdated:`Kleur bijgewerkt`,updateFailed:`Kleur bijwerken mislukt`,colorDeleted:`Kleur verwijderd`,deleteFailed:`Kleur verwijderen mislukt`,resetSuccess:`Kleurcatalogus teruggezet naar standaardwaarden`,resetFailed:`Catalogus resetten mislukt`,syncUpToDate:`Al up-to-date ({{count}} kleuren gecontroleerd)`,syncComplete:`{{added}} nieuwe kleuren toegevoegd ({{skipped}} bestonden al)`,syncError:`Synchronisatiefout`,syncFailed:`Synchroniseren vanaf FilamentColors.xyz mislukt`,exported:`{{count}} kleuren geëxporteerd`,imported:`{{added}} kleuren geïmporteerd ({{skipped}} overgeslagen)`,importFailed:`Importeren mislukt: ongeldig JSON-formaat`,selectedCount:`{{count}} geselecteerd`,deleteSelected:`Geselecteerde verwijderen`,bulkDeleteConfirm:`Weet je zeker dat je {{count}} kleuren wilt verwijderen?`,bulkDeleted:`{{count}} kleuren verwijderd`,bulkDeleteFailed:`Kleuren verwijderen mislukt`},dateFormat:`Datumnotatie`,dateFormatUs:`VS (MM/DD/JJJJ)`,dateFormatEu:`EU (DD/MM/JJJJ)`,dateFormatIso:`ISO (JJJJ-MM-DD)`,timeFormat:`Tijdnotatie`,timeFormat12:`12-uurs (3:30 PM)`,timeFormat24:`24-uurs (15:30)`,defaultPrinter:`Standaardprinter`,defaultPrinterDescription:`Selecteer deze printer vooraf voor uploads, opnieuw afdrukken en andere bewerkingen.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Gebruik Zijbalk om items opnieuw te ordenen, zichtbaarheid te resetten en aangepaste links te beheren.`,setDefault:`Als standaard instellen`,sidebarOrderSetDefaultHint:`Als standaard instellen past de huidige menuvolgorde toe op gebruikers die hun menu nog niet hebben aangepast.`,sidebarDefaultSet:`Standaard menuvolgorde is ingesteld.`,sidebarDefaultCleared:`Standaard menuvolgorde is gewist.`,sidebarDefaultFailed:`Standaard menuvolgorde instellen mislukt.`,reset:`Resetten`,darkMode:`Donkere modus`,lightMode:`Lichte modus`,active:`(actief)`,background:`Achtergrond`,accent:`Accent`,style:`Stijl`,bgNeutral:`Neutraal`,bgWarm:`Warm`,bgCool:`Koel`,bgOled:`OLED-zwart`,bgSlate:`Leisteenblauw`,bgForest:`Bosgroen`,accentGreen:`Groen`,accentTeal:`Blauwgroen`,accentBlue:`Blauw`,accentOrange:`Oranje`,accentPurple:`Paars`,accentRed:`Rood`,styleClassic:`Klassiek`,styleGlow:`Gloed`,styleVibrant:`Levendig`,themeToggleHint:`Schakel met het pictogram in de zijbalk tussen donkere, lichte en systeemmodus.`,progressInTitle:`Afdrukvoortgang in tabblad`,progressInTitleDescription:`Toon het percentage van de actieve afdruk en een voortgangsring in het browsertabblad.`,autoArchivePrints:`Afdrukken automatisch archiveren`,autoArchiveDescription:`3MF-bestanden automatisch opslaan wanneer afdrukken zijn voltooid`,saveThumbnailsDescription:`Voorbeeldafbeeldingen uit 3MF-bestanden extraheren en opslaan`,captureFinishPhotoDescription:`Maak een foto met de printercamera wanneer de afdruk is voltooid. Bambuddy neemt tijdens de afdruk een korte timelapse op zodat de foto kan worden genomen van het moment voordat het bed zakt; het timelapsebestand blijft behouden als je timelapse voor deze afdruk hebt ingeschakeld, anders wordt het automatisch verwijderd nadat de foto is vastgelegd.`,finishPhotoRestorePlate:`Plaat herstellen voor eindfoto`,finishPhotoRestorePlateDescription:`De printer laat de bouwplaat ongeveer 100 mm zakken wanneer een afdruk eindigt, waardoor de voltooide afdruk onder het camerabeeld komt. Bambuddy brengt de plaat terug tot net boven de laatst geprinte laag, maakt de foto en laat hem daarna weer zakken. Wordt overgeslagen wanneer de afdrukhoogte onbekend is of er een andere taak in de wachtrij staat.`,ffmpegNotInstalled:`ffmpeg niet geïnstalleerd`,ffmpegRequired:`Camera-opname vereist ffmpeg. Installeer dit via <brew>brew install ffmpeg</brew> (macOS) of <apt>apt install ffmpeg</apt> (Linux).`,camera:`Camera`,cameraViewMode:`Cameraweergavemodus`,cameraOverlayDescription:`Camera opent in een schaalbare overlay op het hoofdscherm`,cameraWindowDescription:`Camera opent in een apart browservenster`,externalCamerasDescription:`Configureer externe camera's ter vervanging van de ingebouwde printercamera. Ondersteunt MJPEG-streams, RTSP, HTTP-momentopnamen en USB-camera's (V4L2). Wanneer ingeschakeld wordt de externe camera gebruikt voor liveweergave en eindfoto's.`,cameraPlaceholderUsb:`Apparaatpad (/dev/video0)`,cameraPlaceholderUrl:`Camera-URL (rtsp://... of http://...)`,cameraTypeMjpeg:`MJPEG-stream`,cameraTypeRtsp:`RTSP-stream`,cameraTypeSnapshot:`HTTP-momentopname`,cameraTypeUsb:`USB-camera (V4L2)`,cameraSnapshotUrl:`Momentopname-URL (optioneel)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`URL voor één frame, gebruikt voor miniaturen in meldingen, eindfoto's, frames van laagtimelapses en plaatdetectie. Timelapse en plaatdetectie vereisen elk hun eigen schakelaar per printer — deze URL is alleen de afbeeldingsbron die ze gebruiken wanneer actief. Laat leeg om beelden uit de bovenstaande livestream vast te leggen. Handig voor go2rtc (/api/frame.jpeg) en IP-camera's met een speciaal snapshot-eindpunt.`,cameraRotation:`Rotatie`,test:`Testen`,connected:`Verbonden`,disconnected:`Niet verbonden`,currency:`Valuta`,defaultFilamentCost:`Standaard filamentkosten (per kg)`,electricityCost:`Elektriciteitskosten per kWh`,energyDisplayMode:`Weergavemodus energie`,energyModePrintDescription:`Dashboard toont de som van energie die tijdens afdrukken is gebruikt`,energyModeTotalDescription:`Dashboard toont het totale energieverbruik van slimme stekkers over de hele levensduur`,fileManager:`Bestandsbeheer`,createArchiveEntry:`Archiefitem maken bij afdrukken`,createArchiveEntryDescription:`Bij afdrukken vanuit Bestandsbeheer optioneel een archiefitem maken`,lowDiskSpaceWarning:`Waarschuwing weinig schijfruimte`,lowDiskSpaceDescription:`Waarschuwing tonen wanneer vrije schijfruimte onder deze drempel komt`,printerFirmware:`Printerfirmware`,checkFirmwareDescription:`Controleren op printerfirmware-updates van Bambu Lab`,bambuddySoftware:`Bambuddy-software`,autoCheckDescription:`Automatisch controleren op nieuwe versies bij opstarten`,checkNow:`Nu controleren`,updateAvailableVersion:`Update beschikbaar: v{{version}}`,releaseNotes:`Releaseopmerkingen`,updateViaDocker:`Bijwerken via Docker Compose:`,composeDirectory:`Compose-map`,composeDirectoryHint:`Map met je docker-compose.yml. Laat leeg om cd weg te laten.`,copyUpdateCommand:`Update-opdracht kopiëren`,updateViaHomeAssistant:`Updates worden beheerd door de Home Assistant Supervisor. Open Instellingen → Add-ons → Bambuddy in Home Assistant om de nieuwe versie te installeren.`,updateViaWindowsInstaller:`Windows-installaties worden bijgewerkt door het installatieprogramma opnieuw uit te voeren. Download hieronder de nieuwe versie — je gegevens, instellingen en printers blijven behouden.`,downloadWindowsInstaller:`Installatieprogramma voor v{{version}} downloaden`,installUpdate:`Update installeren`,latestVersionRunning:`Je gebruikt de nieuwste versie`,failedToCheckUpdates:`Controleren op updates mislukt: {{error}}`,backupRestore:`Back-up en herstel`,backupRestoreDescription:`Instellingen exporteren/importeren en GitHub-back-up configureren`,goToBackup:`Ga naar Back-up`,externalUrl:`Externe URL`,externalUrlDescription:`De externe URL waarop Bambuddy bereikbaar is. Wordt gebruikt voor afbeeldingen in meldingen en externe integraties.`,bambuddyUrl:`Bambuddy-URL`,externalUrlHint:`Inclusief protocol en poort (bijv. http://192.168.1.100:8000)`,ftpRetry:`FTP opnieuw proberen`,ftpRetryDescription:`FTP-bewerkingen opnieuw proberen wanneer de wifi van de printer onbetrouwbaar is. Geldt voor 3MF-downloads, afdrukuploads, timelapse-downloads en firmware-updates.`,autoRetryDescription:`Mislukte FTP-bewerkingen automatisch opnieuw proberen`,retryAttempts:`Aantal pogingen`,retryDelay:`Vertraging tussen pogingen`,connectionTimeout:`Verbindingstime-out`,time_one:`{{count}} keer`,time_other:`{{count}} keer`,second_one:`{{count}} seconde`,second_other:`{{count}} seconden`,nSeconds:`{{count}} seconden`,increaseForWeakWifi:`Verhoog dit voor printers met zwakke wifi`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Verbind met Home Assistant om slimme stekkers via de REST-API van HA te bedienen. Ondersteunt switch-, light-, input_boolean- en script-entiteiten.`,homeAssistantUrl:`Home Assistant-URL`,longLivedAccessToken:`Long-Lived Access Token`,haTokenHint:`Maak een token in HA: Profiel → Long-Lived Access Tokens → Token maken`,connectionSuccessful:`Verbinding geslaagd`,connectionFailed:`Verbinding mislukt`,haConnectionSuccess:`Succesvol verbonden met Home Assistant.`,haConnectionFailed:`Verbinding met Home Assistant mislukt.`,mqttPublishing:`MQTT-publicatie`,mqttDescription:`Publiceer BamBuddy-gebeurtenissen naar een externe MQTT-broker voor integratie met Node-RED, Home Assistant en andere automatiseringssystemen.`,mqttEnableDescription:`Gebeurtenissen publiceren naar externe MQTT-broker`,brokerHostname:`Hostnaam broker`,port:`Poort`,usernameOptional:`Gebruikersnaam (optioneel)`,passwordOptional:`Wachtwoord (optioneel)`,topicPrefix:`Topic-prefix`,topicPrefixHint:`Topics worden: {{prefix}}/printers/<serial>/status, enz.`,prometheusMetrics:`Prometheus-metrics`,prometheusEndpointDescription:`Printermetrics beschikbaar stellen op <code>/api/v1/metrics</code> voor bewaking met Prometheus/Grafana.`,bearerTokenOptional:`Bearer-token (optioneel)`,bearerTokenHint:`Indien ingesteld moeten verzoeken <code>Authorization: Bearer <token></code> bevatten`,metricsConnectionStatus:`Verbindingsstatus`,metricsPrinterState:`Printerstatus (inactief/afdrukken/enz.)`,metricsPrintProgress:`Afdrukvoortgang 0-100%`,metricsBedTemp:`Bedtemperatuur`,metricsNozzleTemp:`Nozzletemperatuur`,metricsPrintsTotal:`Totaal aantal afdrukken per resultaat`,metricsMore:`...en meer (lagen, ventilatoren, wachtrij, filamentverbruik)`,smartPlugsDescription:`Verbind slimme stekkers (Tasmota of Home Assistant) om stroomregeling te automatiseren en energieverbruik van je printers te volgen.`,allOn:`Alles aan`,allOff:`Alles uit`,addSmartPlug:`Slimme stekker toevoegen`,energySummary:`Energieoverzicht`,currentPower:`Huidig vermogen`,plugsOnline:`{{reachable}}/{{total}} stekkers online`,today:`Vandaag`,yesterday:`Gisteren`,total:`Totaal`,enablePlugsForSummary:`Schakel stekkers in om energieoverzicht te zien`,addNotificationProvider:`Toevoegen`,systemBadge:`(Systeem)`,creating:`Maken...`,changing:`Wijzigen...`,deleteUserAndItems:`Gebruiker EN diens items verwijderen`,deleteUserKeepItems:`Gebruiker verwijderen, items behouden (worden eigenaarloos)`,ok:`OK`,twoFa:{totpTitle:`Authenticator-app (TOTP)`,totpDesc:`Gebruik een authenticator-app zoals Google Authenticator, Aegis of Authy.`,emailOtpTitle:`E-mail-OTP`,emailOtpDesc:`Stuur bij inloggen een eenmalige code naar {{email}}.`,emailOtpNoEmail:`Voeg een e-mailadres toe aan je account om deze methode in te schakelen.`,addEmailFirst:`Je account heeft geen e-mailadres. Vraag een beheerder om er een toe te voegen voordat je E-mail-OTP inschakelt.`,setupTotp:`Authenticator-app instellen`,setupAuthApp:`Authenticator-app instellen`,setupInstructions:`Scan onderstaande QR-code met je authenticator-app en bevestig daarna met een code.`,manualEntry:`Kun je niet scannen? Voer dit geheim handmatig in:`,scannedContinue:`Ik heb de code gescand — doorgaan`,enterCodeToConfirm:`Voer de 6-cijferige code uit je authenticator-app in om de installatie te bevestigen.`,activate:`Activeren`,disableTotp:`Authenticator uitschakelen`,disableConfirmHint:`Voer een geldige TOTP-code of back-upcode in om de authenticator uit te schakelen.`,totpDisabled:`Authenticator-app uitgeschakeld.`,emailOtpEnabled:`E-mail-OTP ingeschakeld.`,emailOtpDisabled:`E-mail-OTP uitgeschakeld.`,smtpRequired:`Configureer en test eerst de SMTP-instellingen.`,invalidCode:`Ongeldige code. Probeer het opnieuw.`,enableEmailOtp:`E-mail-OTP inschakelen`,disableEmailOtp:`E-mail-OTP uitschakelen`,emailSetupEnterCode:`Er is een verificatiecode naar je e-mailadres gestuurd. Voer deze hieronder in om te bevestigen dat deze inbox van jou is.`,verifyAndEnable:`Verifiëren en inschakelen`,emailDisablePasswordHint:`Voer je accountwachtwoord in om het uitschakelen van e-mail-OTP te bevestigen.`,passwordPlaceholder:`Voer je wachtwoord in`,backupCodesTitle:`Bewaar je back-upcodes`,backupCodesWarning:`Bewaar deze codes op een veilige plek. Elke code kan maar één keer worden gebruikt en wordt niet opnieuw getoond.`,backupCodesRemaining:`{{count}} back-upcodes resterend`,savedCodes:`Ik heb mijn codes opgeslagen`,regenBackup:`Back-upcodes opnieuw genereren`,regenBackupHint:`Voer je huidige TOTP-code in om 10 nieuwe back-upcodes te genereren. Alle bestaande back-upcodes worden ongeldig.`,newBackupCodes:`Nieuwe back-upcodes`,linkedAccounts:`Gekoppelde SSO-accounts`,linkedAccountsDesc:`Deze externe identiteitsproviders zijn gekoppeld aan je account.`,oidcUnlinked:`Account ontkoppeld.`},sessionPolicy:{title:`Sessiebeleid`,description:`Maximale sessieduur voor nieuwe gebruikerslogins. Reeds uitgegeven tokens behouden hun oorspronkelijke vervaldatum.`,preset24h:`24 uur`,preset7d:`7 dagen`,preset30d:`30 dagen`,customHoursLabel:`Aangepaste sessieduur in uren`,hoursSuffix:`uren`,warning:`Langere sessies verminderen de bescherming door automatisch uitloggen. Alleen aanbevolen voor vertrouwde installaties met één gebruiker.`},oidc:{title:`SSO / OIDC-providers`,desc:`Configureer OpenID Connect-providers om single sign-on via externe identiteitsproviders toe te staan.`,addProvider:`Provider toevoegen`,newProvider:`Nieuwe provider`,empty:`Nog geen OIDC-providers geconfigureerd.`,created:`Provider gemaakt.`,updated:`Provider bijgewerkt.`,deleted:`Provider verwijderd.`,refreshIcon:`Pictogram vernieuwen`,removeIcon:`Pictogram verwijderen`,iconRefreshed:`Pictogram vernieuwd.`,iconRemoved:`Pictogram verwijderd.`,iconFetchFailed:`Pictogram kon niet worden opgehaald van de provider-URL.`,deleteTitle:`Provider verwijderen`,deleteMessage:`"{{name}}" verwijderen? Alle gekoppelde gebruikersaccounts worden ontkoppeld.`,form:{name:`Weergavenaam`,issuerUrl:`Issuer-URL`,clientId:`Client-ID`,clientSecret:`Client Secret`,scopes:`Scopes`,iconUrl:`Pictogram-URL (optioneel)`,enabled:`Ingeschakeld`,autoCreate:`Gebruikers automatisch maken`,autoCreateDesc:`Automatisch een lokaal account maken bij de eerste login.`,autoLink:`Bestaande accounts automatisch koppelen`,autoLinkDesc:`Bestaande lokale accounts bij de eerste login koppelen op basis van een overeenkomend e-mailadres.`,secretHint:`laat leeg om huidige waarde te behouden`,secretPlaceholder:`nieuw geheim`,emailClaim:`E-mailclaim`,emailClaimDesc:`JWT-claim die als e-mailidentiteit wordt gebruikt. Gebruik 'preferred_username' of 'upn' voor Azure Entra ID (dat email_verified niet meestuurt). Gebruik alleen vertrouwde claimnamen.`,emailClaimPlaceholder:`email`,emailClaimCustomClaimAutoLinkWarning:`Aangepaste claims zijn alleen veilig voor automatische koppeling wanneer de waarde door de tenantbeheerder wordt beheerd (bijv. Azure Entra ID upn / preferred_username). Schakel automatisch koppelen niet in als je IdP gebruikers deze claim zelf laat opgeven.`,requireEmailVerified:`Geverifieerd e-mailadres vereisen`,requireEmailVerifiedDesc:`Accepteer de e-mailclaim alleen wanneer de provider deze als geverifieerd markeert.`,requireEmailVerifiedWarning:`Waarschuwing: e-mail wordt ook zonder verificatie geaccepteerd. Gebruik dit alleen met vertrouwde providers.`,requireEmailVerifiedAutoLink:`Schakel automatisch koppelen eerst uit om deze instelling te wijzigen.`,defaultGroup:`Standaardgroep`,defaultGroupDesc:`Groep die aan automatisch gemaakte gebruikers wordt toegewezen. Valt terug op Kijkers indien niet ingesteld.`,defaultGroupViewersFallback:`Kijkers (standaard)`,autologin:`Automatisch inloggen`,autologinDesc:`Stuur niet-geauthenticeerde bezoekers rechtstreeks door naar deze provider. Slechts één provider kan deze vlag hebben.`}},encryption:{title:`MFA-versleutelingsstatus`,enabledFromEnv:`Versleuteling in opslag ingeschakeld (sleutel uit omgevingsvariabele MFA_ENCRYPTION_KEY)`,enabledFromFile:`Versleuteling in opslag ingeschakeld (sleutel geladen uit gegevensmap)`,enabledGenerated:`Versleuteling in opslag ingeschakeld met automatisch gegenereerde sleutel`,notConfigured:`Versleuteling in opslag niet geconfigureerd`,notConfiguredDesc:`TOTP-geheimen en OIDC client_secrets worden als platte tekst opgeslagen. Stel MFA_ENCRYPTION_KEY in of start Bambuddy opnieuw met een schrijfbare gegevensmap om automatisch een sleutel te genereren.`,allEncrypted:`Alle MFA-geheimen zijn versleuteld opgeslagen.`,legacyRowsLabel:`Verouderde rijen met platte tekst`,encryptedRowsLabel:`Versleutelde rijen`,legacyRowsWarning:`{{count}} verouderde rij(en) met platte tekst gedetecteerd. Sla de OIDC-provider opnieuw op of registreer de authenticator-app van de gebruiker opnieuw om naar versleutelde opslag te migreren.`,backupHint:`De automatisch gegenereerde sleutel wordt opgeslagen in DATA_DIR/.mfa_encryption_key en zit in lokale back-up-ZIP's. Bewaar je back-ups veilig of stel MFA_ENCRYPTION_KEY expliciet in.`,decryptionBrokenTitle:`Versleutelingssleutel ontbreekt`,decryptionBrokenError:`{{count}} versleutelde record(s) kunnen niet worden ontsleuteld omdat de versleutelingssleutel niet meer beschikbaar is. Herstel de vorige MFA_ENCRYPTION_KEY of DATA_DIR/.mfa_encryption_key om te herstellen.`,migrationErrorWarning:`{{count}} verouderde rij(en) konden bij het opstarten niet opnieuw worden versleuteld. Controleer de serverlogboeken en start Bambuddy opnieuw om het opnieuw te proberen.`},pipelineLimits:{title:`Limieten slicerpipeline`,maxCopiesLabel:`Max. kopieën per run`,maxCopiesDesc:`Bovengrens voor het aantal kopieën dat operators kunnen aanvragen bij het uitvoeren van een pipeline. Harde serverlimiet is 1000.`},pipelines:{title:`Slicerpipelines`,subtitle:`Herbruikbare bundels met presets (printer + proces + filamenten + bedtype). Sla er een op vanuit het Slice-dialoogvenster en pas deze met één klik toe op het volgende bestand.`,loading:`Pipelines laden…`,loadError:`Pipelines konden niet worden geladen.`,confirmDelete:`Deze pipeline verwijderen? Dit kan niet ongedaan worden gemaakt.`,staleWarning:`Een of meer gekoppelde presets bestaan niet meer. Sla deze pipeline opnieuw op vanuit het Slice-dialoogvenster om dit te herstellen.`,empty:{title:`Nog geen pipelines.`,howto:`Open het Slice-dialoogvenster voor een bestand, kies printer / proces / filamenten / bedtype en klik daarna op "Opslaan als pipeline". Je opgeslagen pipelines verschijnen hier.`},field:{name:`Pipelinenaam`,description:`Beschrijving`,targetPrinter:`Doelprinter`,noTarget:`— Geen doel —`,targetKind:`Doeltype`,targetKindSpecific:`Specifieke printer`,targetKindClass:`Printerklasse`,targetModelClass:`Printermodel`,fanoutStrategy:`Verdelingsstrategie`,fanout:{max_parallel:`Maximaal parallel — verdelen over elke inactieve overeenkomende printer`,round_robin:`Round robin — rouleren door geschikte printers`,fill_one_first:`Eerst één vullen — alle kopieën aan één printer koppelen`},fanoutShort:{max_parallel:`parallel`,round_robin:`round robin`,fill_one_first:`eerst één vullen`}},action:{save:`Opslaan`,cancel:`Annuleren`,rename:`Naam wijzigen`,delete:`Verwijderen`},slot:{printer:`Printer`,process:`Proces`,filament:`Filament`,filamentN:`Filament {{n}}`,filamentAll:`Alle {{n}} sleuven`,bed:`Printbed`},group:{profiles:`Profielen`,filaments:`Filamenten`},searchPlaceholder:`Pipelines zoeken…`,filterTargetType:`Filteren op doeltype`,filterTarget:`Filteren op doel`,filter:{all:`Alle doelen`,noTarget:`Geen doel ingesteld`,count:`{{shown}} / {{total}}`,noMatches:`Geen pipelines komen overeen met de huidige filters.`},toast:{saved:`Pipeline opgeslagen`,saveFailed:`Opslaan mislukt`,deleted:`Pipeline verwijderd`,deleteFailed:`Verwijderen mislukt`},noTargetHint:`Stel een doelprinter in om dit uit te voeren`,noTargetWarning:`Stel een doelprinter in voordat je deze pipeline uitvoert.`,runs:{lastRun:`Laatste run`,status:{queued:`in wachtrij`,slicing:`slicen`,dispatching:`verzenden`,in_progress:`bezig met afdrukken`,completed:`voltooid`,failed:`mislukt`,partial_failure:`gedeeltelijke fout`,cancelled:`geannuleerd`}}}},notification:{printStarted:{title:`Afdruk gestart`,body:`{{printer}}: {{filename}} is begonnen met afdrukken`},printCompleted:{title:`Afdruk voltooid`,body:`{{printer}}: {{filename}} succesvol voltooid`},printFailed:{title:`Afdruk mislukt`,body:`{{printer}}: {{filename}} is mislukt`},printStopped:{title:`Afdruk gestopt`,body:`{{printer}}: {{filename}} is gestopt`},printProgress:{title:`Afdrukvoortgang`,body:`{{printer}}: {{filename}} is {{percent}}% voltooid`},printerOffline:{title:`Printer offline`,body:`{{printer}} is offline`},printerError:{title:`Printerfout`,body:`{{printer}}: {{error}}`},filamentLow:{title:`Weinig filament`,body:`{{printer}}: Filament raakt bijna op`},maintenanceDue:{title:`Onderhoud nodig`,body:`{{printer}}: {{items}} vereisen aandacht`}},errors:{generic:`Er is iets misgegaan`,networkError:`Netwerkfout. Controleer je verbinding.`,notFound:`Niet gevonden`,unauthorized:`Niet geautoriseerd`,serverError:`Serverfout`,validationError:`Controleer je invoer`,printerConnectionFailed:`Verbinding met printer mislukt`,saveFailed:`Wijzigingen opslaan mislukt`,deleteFailed:`Verwijderen mislukt`,loadFailed:`Gegevens laden mislukt`},hmsErrors:{title:`Fouten - {{name}}`,noErrors:`Geen fouten`,viewOnWiki:`Bekijken op Bambu Lab Wiki`,mqttVerifyFailedRemedy:`Schakel Developer Mode op de printer in, start de printer opnieuw en start daarna de taak opnieuw.`,unknownCode:`Onbekende HMS-code — zie de Bambu Lab-wiki voor details.`,clearInstructions:`Wis fouten op de printer om ze hier te verwijderen.`,clearErrors:`Fouten wissen`,clearSuccess:`HMS-fouten gewist`,clearFailed:`HMS-fouten wissen mislukt`,actionSuccess:`Actie naar printer verzonden`,actionFailed:`Actie verzenden mislukt`,runoutExpectedSlot:`Filament is op in {{ranOut}}. De printer wacht nu op compatibel filament in {{expected}}. Plaats een spoel in {{expected}} en selecteer daarna Opnieuw proberen.`,runoutExpectedSlotOnly:`De printer wacht op compatibel filament in {{expected}}. Plaats daar een spoel en selecteer daarna Opnieuw proberen.`,runoutSlotUnknown:`Filament is op en de afdruk is gepauzeerd. Bambuddy kon niet bepalen welke sleuf de printer nu verwacht — controleer het printerscherm voor de gevraagde sleuf.`,actions:{RESUME_PRINTING:`Afdrukken hervatten`,RESUME_PRINTING_DEFECTS:`Hervatten (defecten acceptabel)`,RESUME_PRINTING_PROBELM_SOLVED:`Hervatten (probleem opgelost)`,STOP_PRINTING:`Afdrukken stoppen`,CHECK_ASSISTANT:`Assistent controleren`,FILAMENT_EXTRUDED:`Filament geëxtrudeerd, doorgaan`,RETRY_FILAMENT_EXTRUDED:`Nog niet geëxtrudeerd, opnieuw proberen`,CONTINUE:`Voltooid, doorgaan`,LOAD_VIRTUAL_TRAY:`Filament laden`,OK_BUTTON:`OK`,FILAMENT_LOAD_RESUME:`Filament geladen, hervatten`,JUMP_TO_LIVEVIEW:`Liveweergave bekijken`,NO_REMINDER_NEXT_TIME:`Volgende keer niet herinneren`,REFRESH_NOZZLE:`Opnieuw controleren`,IGNORE_NO_REMINDER_NEXT_TIME:`Negeren. Volgende keer niet herinneren`,IGNORE_RESUME:`Negeren en hervatten`,PROBLEM_SOLVED_RESUME:`Probleem opgelost en hervatten`,TURN_OFF_FIRE_ALARM:`Begrepen, brandalarm uitschakelen.`,RETRY_PROBLEM_SOLVED:`Opnieuw proberen (probleem opgelost)`,CANCLE:`Annuleren`,STOP_DRYING:`Drogen stoppen`,PROCEED:`Doorgaan`,OK_JUMP_RACK:`OK`,ABORT:`Afbreken`,DISABLE_PURIFICATION:`Luchtreiniging voor deze afdruk uitschakelen`,DONT_REMIND_NEXT_TIME:`Niet meer herinneren`,DBL_CHECK_CANCEL:`Annuleren`,DBL_CHECK_DONE:`Klaar`,DBL_CHECK_RETRY:`Opnieuw proberen`,DBL_CHECK_RESUME:`Hervatten`,DBL_CHECK_OK:`Bevestigen`,REMOVE_CLOSE_BTN:`Sluiten`}},mqttDebug:{title:`MQTT-debuglogboek`,searchPlaceholder:`Topic of payload zoeken...`,noMessages:`Nog geen berichten gelogd`,startLoggingHint:`Klik op "Loggen starten" om MQTT-berichten vast te leggen`,noMessagesMatch:`Geen berichten komen overeen met je filter`,adjustFilterHint:`Probeer je zoekopdracht of filtercriteria aan te passen`,incoming:`Inkomend`,outgoing:`Uitgaand`,loggingStopped:`Loggen gestopt`,loggingActive:`Loggen actief - berichten worden automatisch vernieuwd`,startLogging:`Loggen starten`,stopLogging:`Loggen stoppen`,clearLog:`Logboek wissen`,topic:`Topic`,timestamp:`Tijdstempel`,direction:`Richting`,all:`Alle`},printerFiles:{zipStarted_one:`ZIP-download gestart voor {{count}} bestand`,zipStarted_other:`ZIP-download gestart voor {{count}} bestanden`,zipPartial:`ZIP-download gestart met {{successful}} van {{total}} bestanden; de overige konden niet worden opgehaald`,downloadFailed:`Download mislukt: {{error}}`,unknownError:`Onbekende fout`,shiftSelectHint:`Shift-klik om een bereik te selecteren`,selectFile:`{{name}} selecteren`,deselectFile:`{{name}} deselecteren`,title:`Bestandsbeheer`,storageUsed:`Gebruikt:`,storageFree:`Vrij:`,filterPlaceholder:`Bestanden filteren...`,deleteButton:`Verwijderen`,deleteFiles:`{{count}} bestanden verwijderen`,deleteFileConfirm:`"{{name}}" verwijderen? Dit kan niet ongedaan worden gemaakt.`,deleteFilesConfirm:`{{count}} geselecteerde bestanden verwijderen? Dit kan niet ongedaan worden gemaakt.`,noFiles:`Geen bestanden op printer`,printerUnavailable:`De bestandsservice van de printer is niet beschikbaar. Probeer het opnieuw wanneer de printer bereikbaar is.`,loadingFiles:`Bestanden laden...`,failedToLoad:`Bestanden laden mislukt`,toast:{filesDeleted:`{{count}} bestand(en) verwijderd`,deleteFailed:`Verwijderen mislukt: {{error}}`}},confirm:{delete:`Weet je zeker dat je dit wilt verwijderen?`,unsavedChanges:`Je hebt niet-opgeslagen wijzigingen. Weet je zeker dat je wilt vertrekken?`,clearQueue:`Weet je zeker dat je de wachtrij wilt wissen?`},login:{title:`Bambuddy-login`,subtitle:`Log in op je account`,username:`Gebruikersnaam`,usernamePlaceholder:`Voer je gebruikersnaam in`,usernameOrEmail:`Gebruikersnaam of e-mail`,usernameOrEmailPlaceholder:`Gebruikersnaam of @ e-mail`,password:`Wachtwoord`,passwordPlaceholder:`Voer je wachtwoord in`,signIn:`Inloggen`,signingIn:`Inloggen...`,rememberMe:`Onthoud mij`,forgotPassword:`Wachtwoord vergeten?`,autologinFailed:`Automatisch inloggen via SSO is mislukt. Kies hieronder een provider om door te gaan.`,localDisabledNotice:`Lokaal inloggen is uitgeschakeld. Gebruik een van de onderstaande SSO-providers.`,loginSuccess:`Succesvol ingelogd`,loginFailed:`Inloggen mislukt`,enterCredentials:`Voer gebruikersnaam en wachtwoord in`,enterEmail:`Voer je e-mailadres in`,oidcLoginFailed:`OIDC-login mislukt`,oidcErrors:{providerError:`De identiteitsprovider heeft een fout geretourneerd`,missingParameters:`OIDC-callback mist vereiste parameters`,invalidState:`OIDC-status is ongeldig of is al gebruikt`,stateExpired:`OIDC-inlogsessie verlopen — probeer het opnieuw`,providerNotFound:`OIDC-provider niet gevonden`,discoveryFailed:`OIDC-discoverydocument ophalen mislukt`,invalidDiscovery:`OIDC-discoverydocument is ongeldig`,networkError:`Netwerkfout tijdens OIDC-tokenuitwisseling`,badResponse:`Onverwachte reactie tijdens OIDC-tokenuitwisseling`,noIdToken:`OIDC-provider heeft geen ID-token geretourneerd`,validationFailed:`OIDC-tokenvalidatie mislukt`,nonceMismatch:`OIDC-nonce komt niet overeen — mogelijke replay-aanval`,missingSubClaim:`OIDC-token mist de sub-claim`,noLinkedAccount:`Er is geen lokaal account gekoppeld aan deze OIDC-identiteit`,accountInactive:`Je account is inactief`,userResolutionFailed:`Je account kon niet worden bepaald`,internalError:`Er is een interne fout opgetreden tijdens OIDC-login`,tokenExchangeFailed:`OIDC-tokenuitwisseling mislukt`},forgotPasswordTitle:`Wachtwoord vergeten`,forgotPasswordMessage:`Als je je wachtwoord bent vergeten, neem dan contact op met je systeembeheerder om het te laten resetten.`,forgotPasswordEmailMessage:`Voer je e-mailadres in en we sturen je een nieuw wachtwoord.`,emailAddress:`E-mailadres`,emailPlaceholder:`jouw.email@voorbeeld.nl`,cancel:`Annuleren`,sending:`Verzenden...`,sendResetEmail:`Resetmail verzenden`,howToReset:`Zo reset je je wachtwoord:`,resetStep1:`Neem contact op met je Bambuddy-beheerder`,resetStep2:`Vraag om je wachtwoord te resetten in Gebruikersbeheer`,resetStep3:`De beheerder kan een nieuw tijdelijk wachtwoord voor je instellen`,resetStep4:`Log in met het nieuwe wachtwoord en wijzig het in Instellingen`,gotIt:`Begrepen`,resetPassword:{title:`Nieuw wachtwoord instellen`,subtitle:`Voer hieronder je nieuwe wachtwoord in en bevestig het.`,newPassword:`Nieuw wachtwoord`,newPasswordPlaceholder:`Minstens 8 tekens`,confirmPassword:`Wachtwoord bevestigen`,confirmPasswordPlaceholder:`Herhaal nieuw wachtwoord`,saving:`Opslaan…`,submit:`Nieuw wachtwoord instellen`,backToLogin:`Terug naar login`,passwordsDoNotMatch:`Wachtwoorden komen niet overeen`,passwordTooShort:`Wachtwoord moet minstens 8 tekens bevatten`,resetFailed:`Wachtwoord resetten mislukt. De link is mogelijk verlopen.`},twoFA:{title:`Tweefactorauthenticatie`,subtitle:`Je account is beveiligd met 2FA. Voer hieronder de verificatiecode in.`,methodAuthenticator:`Authenticator-app`,methodEmail:`E-mailcode`,methodBackup:`Back-upcode`,instructionsTotp:`Open je authenticator-app en voer de 6-cijferige code voor Bambuddy in.`,instructionsEmail:`Er is een 6-cijferige code naar je e-mailadres gestuurd. Deze verloopt over 10 minuten.`,instructionsEmailNotSent:`Klik op de knop hieronder om een verificatiecode per e-mail te ontvangen.`,instructionsBackup:`Voer een van je 8-teken lange back-upherstelcodes in. Elke code kan maar één keer worden gebruikt.`,sendCodeButton:`Code per e-mail verzenden`,sendingCode:`Verzenden...`,resendCode:`Code opnieuw verzenden`,codeLabel:`Verificatiecode`,backupCodeLabel:`Back-upcode`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Verifiëren`,verifyingButton:`Verifiëren...`,backToLogin:`← Terug naar login`,orContinueWith:`of doorgaan met`,signInWith:`Inloggen met {{provider}}`,enterCode:`Voer de verificatiecode in`,sendCodeFailed:`Verificatiecode verzenden mislukt`,invalidCode:`Ongeldige code. Probeer het opnieuw.`}},setup:{title:`Bambuddy-installatie`,subtitle:`Authenticatie configureren voor je Bambuddy-instantie`,enableAuth:`Authenticatie inschakelen`,adminAccount:`Beheerdersaccount`,adminAccountDesc:`Als er al beheerders bestaan, wordt authenticatie ingeschakeld met de bestaande beheerdersaccounts. Laat de onderstaande velden leeg om bestaande beheerders te gebruiken, of voer nieuwe gegevens in om een nieuwe beheerder te maken.`,adminUsername:`Gebruikersnaam beheerder`,adminPassword:`Wachtwoord beheerder`,optionalIfAdminExists:`(optioneel als er beheerders bestaan)`,adminUsernamePlaceholder:`Voer gebruikersnaam beheerder in (optioneel)`,adminPasswordPlaceholder:`Voer wachtwoord beheerder in (optioneel)`,confirmPassword:`Wachtwoord bevestigen`,confirmPasswordPlaceholder:`Bevestig wachtwoord beheerder`,settingUp:`Instellen...`,completeSetup:`Installatie voltooien`,toast:{authEnabledAdminCreated:`Authenticatie ingeschakeld en beheerdersgebruiker gemaakt`,authEnabledExistingAdmins:`Authenticatie ingeschakeld met bestaande beheerders`,setupCompleted:`Installatie voltooid`,enterBothCredentials:`Voer zowel gebruikersnaam als wachtwoord van de beheerder in, of laat beide leeg om bestaande beheerders te gebruiken`,passwordsDoNotMatch:`Wachtwoorden komen niet overeen`,passwordTooShort:`Wachtwoord moet minstens 6 tekens bevatten`}},changePassword:{title:`Wachtwoord wijzigen`,currentPassword:`Huidig wachtwoord`,currentPasswordPlaceholder:`Voer huidig wachtwoord in`,newPassword:`Nieuw wachtwoord`,newPasswordPlaceholder:`Voer nieuw wachtwoord in (min. 6 tekens)`,confirmPassword:`Nieuw wachtwoord bevestigen`,confirmPasswordPlaceholder:`Bevestig nieuw wachtwoord`,passwordsDoNotMatch:`Wachtwoorden komen niet overeen`,passwordTooShort:`Wachtwoord moet minstens 6 tekens bevatten`,changing:`Wijzigen...`,success:`Wachtwoord succesvol gewijzigd`,failed:`Wachtwoord wijzigen mislukt`},plateAlert:{title:`Afdruk gepauzeerd!`,message:`Objecten gedetecteerd op de bouwplaat. De afdruk is automatisch gepauzeerd. Maak de plaat vrij en hervat de afdruk.`,understand:`Ik begrijp het`},camera:{title:`Cameraweergave`,invalidPrinterId:`Ongeldige printer-ID`,live:`Live`,snapshot:`Momentopname`,restartStream:`Stream opnieuw starten`,refreshSnapshot:`Momentopname vernieuwen`,fullscreen:`Volledig scherm`,exitFullscreen:`Volledig scherm afsluiten`,connectingToCamera:`Verbinding maken met camera...`,capturingSnapshot:`Momentopname vastleggen...`,connectionLost:`Verbinding verbroken`,connectionFailed:`Cameraverbinding mislukt`,reconnecting:`Opnieuw verbinden over {{countdown}}s... (poging {{attempt}}/{{max}})`,reconnectNow:`Nu opnieuw verbinden`,cameraUnavailable:`Camera niet beschikbaar`,cameraUnavailableDesc:`Zorg dat de printer is ingeschakeld en verbonden.`,noCamera:`Geen camera beschikbaar`,retry:`Opnieuw proberen`,cameraStream:`Camerastream`,zoomOut:`Uitzoomen`,zoomIn:`Inzoomen`,resetZoom:`Zoom resetten`,recording:`Opnemen`,startRecording:`Opname starten`,stopRecording:`Opname stoppen`,chamberLight:`Kamerverlichting omschakelen`,unavailable:`Camera niet beschikbaar`,diagnose:{button:`Diagnose`,modalTitle:`Cameradiagnose`,running:`Diagnose uitvoeren...`,runFailed:`Diagnose kon niet worden uitgevoerd: {{error}}`,retry:`Opnieuw uitvoeren`,stage:{tcp_reachable:`Netwerkbereikbaarheid`,first_frame:`Frame vastleggen`,live_stream_active:`Livestream actief`},summary:{all_ok:`Camera werkt. De diagnose heeft alle stappen succesvol voltooid.`,live_stream_active_healthy:`Camera streamt momenteel met recente frames — geen test nodig.`,printer_unreachable:`Printer is niet bereikbaar. Controleer het IP-adres, de netwerkverbinding en of de printer is ingeschakeld.`,camera_port_closed:`Printer is bereikbaar maar de camerapoort is gesloten. Zorg dat LAN-only-modus en Developer Mode zijn ingeschakeld in de printerinstellingen.`,no_frame:`Verbonden met de camera, maar er zijn geen frames ontvangen. Probeer opnieuw of controleer of de camera is ingeschakeld in de printerinstellingen.`,unknown_failure:`Cameradiagnose is om onbekende reden mislukt. Controleer het supportlogboek voor details.`},meta:{protocol:`Protocol`,port:`Poort`,profile:`Profiel`}}},groups:{title:`Groepsbeheer`,subtitle:`Machtigingsgroepen beheren voor toegangscontrole`,backToSettings:`Terug naar Instellingen`,createGroup:`Groep maken`,noPermission:`Je hebt geen toestemming om deze pagina te openen.`,system:`Systeem`,noDescription:`Geen beschrijving`,usersCount:`{{count}} gebruikers`,permissionsCount:`{{count}} machtigingen`,edit:`Bewerken`,delete:`Verwijderen`,toast:{created:`Groep succesvol gemaakt`,updated:`Groep succesvol bijgewerkt`,deleted:`Groep succesvol verwijderd`,enterGroupName:`Voer een groepsnaam in`},modal:{editGroup:`Groep bewerken`,createGroup:`Groep maken`,cancel:`Annuleren`,saving:`Opslaan...`,creating:`Maken...`,saveChanges:`Wijzigingen opslaan`},form:{groupName:`Groepsnaam`,groupNamePlaceholder:`Voer groepsnaam in`,systemGroupWarning:`Namen van systeemgroepen kunnen niet worden gewijzigd`,description:`Beschrijving`,descriptionPlaceholder:`Voer beschrijving in (optioneel)`,permissions:`Machtigingen ({{count}} geselecteerd)`},deleteModal:{title:`Groep verwijderen`,message:`Weet je zeker dat je deze groep wilt verwijderen? Gebruikers in deze groep verliezen deze machtigingen.`,confirm:`Groep verwijderen`},editor:{title:`Groep bewerken`,createTitle:`Groep maken`,search:`Machtigingen zoeken...`,selectAll:`Alles selecteren`,clearAll:`Alles wissen`,permissionsSelected:`{{count}} geselecteerd`,noResults:`Geen machtigingen komen overeen met je zoekopdracht`,websocketHint:`Vereist voor live-updates. Zonder dit valt de interface terug op periodieke polling.`}},users:{title:`Gebruikersbeheer`,subtitle:`Gebruikers en hun toegang tot je Bambuddy-instantie beheren`,backToSettings:`Terug naar Instellingen`,createUser:`Gebruiker maken`,noPermission:`Je hebt geen toestemming om deze pagina te openen.`,admin:`Beheerder`,noGroups:`Geen groepen`,active:`Actief`,inactive:`Inactief`,edit:`Bewerken`,delete:`Verwijderen`,system:`Systeem`,noGroupsAvailable:`Geen groepen beschikbaar`,table:{username:`Gebruikersnaam`,groups:`Groepen`,status:`Status`,actions:`Acties`},toast:{created:`Gebruiker succesvol gemaakt`,updated:`Gebruiker succesvol bijgewerkt`,deleted:`Gebruiker succesvol verwijderd`,fillRequired:`Vul alle verplichte velden in`,passwordsDoNotMatch:`Wachtwoorden komen niet overeen`,passwordTooShort:`Wachtwoord moet minstens 6 tekens bevatten`,ldapProvisioned:`LDAP-gebruiker "{{username}}" ingericht`},modal:{createUser:`Gebruiker maken`,editUser:`Gebruiker bewerken`,cancel:`Annuleren`,creating:`Maken...`,saving:`Opslaan...`,saveChanges:`Wijzigingen opslaan`,advancedAuthSubtitle:`met Geavanceerde authenticatie`,tabsAriaLabel:`Gebruikersbron`,localTab:`Lokaal`,ldapTab:`LDAP`,ldapSearchLabel:`Directory zoeken`,ldapSearchPlaceholder:`Typ een gebruikersnaam, naam of e-mailadres...`,ldapMinChars:`Typ minstens 2 tekens om te zoeken`,ldapTypeToSearch:`Begin te typen om in de LDAP-directory te zoeken`,ldapSearching:`Directory doorzoeken...`,ldapNoResults:`Geen overeenkomende gebruikers in de directory`,ldapSearchError:`Zoeken in directory mislukt. Controleer de status van de LDAP-server.`,ldapAlreadyProvisioned:`Al ingericht`,ldapSelectedLabel:`Geselecteerd`,ldapProvision:`Gebruiker inrichten`,ldapProvisioning:`Inrichten...`,ldapErrorProvision:`Inrichten mislukt. Controleer de status van de LDAP-server en probeer opnieuw.`},form:{username:`Gebruikersnaam`,usernamePlaceholder:`Voer gebruikersnaam in`,email:`E-mail`,emailPlaceholder:`user@example.com`,password:`Wachtwoord`,passwordPlaceholder:`Voer wachtwoord in`,confirmPassword:`Wachtwoord bevestigen`,confirmPasswordPlaceholder:`Bevestig wachtwoord`,newPasswordPlaceholder:`Voer nieuw wachtwoord in`,confirmNewPasswordPlaceholder:`Bevestig nieuw wachtwoord`,leaveBlankToKeep:`laat leeg om huidige waarde te behouden`,groups:`Groepen`,optional:`optioneel`,autoGeneratedPassword:`Een veilig wachtwoord wordt automatisch gegenereerd en per e-mail naar de gebruiker gestuurd.`,passwordManagedByAdvancedAuth:`Wachtwoord wordt beheerd door Geavanceerde authenticatie. Gebruik "Wachtwoord resetten" om via e-mail een nieuw wachtwoord naar de gebruiker te sturen.`,resetPassword:`Wachtwoord resetten`,resettingPassword:`Wachtwoord resetten...`},deleteModal:{title:`Gebruiker verwijderen`,message:`Weet je zeker dat je deze gebruiker wilt verwijderen? Deze actie kan niet ongedaan worden gemaakt.`,confirm:`Gebruiker verwijderen`}},streamOverlay:{title:`Streamoverlay`,invalidPrinterId:`Ongeldige printer-ID`,cameraStream:`Camerastream`,progress:`Voortgang`,eta:`ETA`,printerIdle:`Printer is inactief`,printerOffline:`Printer offline`,builder:{title:`Streamingoverlay`,description:`Bouw de URL voor een streamingoverlay — een camerabeeld op volledig scherm met live afdrukgegevens eroverheen, voor OBS, een wanddisplay of elke browserbron. Kies de velden die je wilt en kopieer de URL.`,printer:`Printer`,size:`Tekstgrootte`,sizeSmall:`Klein`,sizeMedium:`Middelgroot`,sizeLarge:`Groot`,fps:`Framesnelheid`,fpsHint:`A1- en P1-camera's halen maximaal ongeveer 5 fps, ongeacht wat je instelt.`,token:`Token voor streamingoverlay (optioneel)`,tokenHint:`Alleen nodig wanneer login is ingeschakeld: OBS heeft geen eigen sessie. Maak hierboven een token met het bereik Streamingoverlay.`,tokenWarning:`Deze URL bevat een token — iedereen die hem kan lezen kan de stream bekijken en de bestandsnaam zien. Trek het token in om de toegang te stoppen.`,fields:`Velden om te tonen`,fieldPrinter:`Printernaam`,fieldFilename:`Bestandsnaam`,fieldStatus:`Status`,fieldProgress:`Voortgangsbalk`,fieldLayers:`Aantal lagen`,fieldEta:`Resterende tijd en ETA`,fieldCamera:`Camerabeeld`,chamberHint:`Kamertemperatuur verschijnt alleen op modellen met een echte kamersensor — P1- en A1-printers melden een betekenisloze waarde, daarom wordt die daar weggelaten.`,urlTitle:`Overlay-URL`,open:`Open`,showPreview:`Voorbeeld tonen`,hidePreview:`Voorbeeld verbergen`,previewTitle:`Overlayvoorbeeld`},status:{printing:`Bezig met afdrukken`,paused:`Gepauzeerd`,finished:`Voltooid`,failed:`Mislukt`,idle:`Inactief`,unknown:`Onbekend`}},profiles:{title:`Profielen`,subtitle:`Beheer je slicerpresets en pressure-advance-kalibraties`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Lokale profielen`,kprofiles:`K-profielen`},orcaCloud:{connectedAs:`Verbonden als`,connectedShort:`Verbonden met Orca Cloud`,logout:`Verbinding verbreken`,noLogoutPermission:`Je hebt geen toestemming om de verbinding te verbreken`,noConnectPermission:`Je hebt geen toestemming om verbinding te maken met Orca Cloud`,retry:`Opnieuw proberen`,connectButton:`Orca Cloud verbinden`,connect:{title:`Verbinden met Orca Cloud`,description:`Log in op je Orca Cloud-account om je slicerprofielen met Bambuddy te synchroniseren.`},device:{title:`Bambuddy goedkeuren in Orca Cloud`,instruction:`Open Orca Cloud en keur deze code goed. Bambuddy maakt automatisch verbinding zodra je goedkeurt.`,codeLabel:`Je koppelcode`,openButton:`Orca Cloud-goedkeuringspagina openen`,manualHint:`Of ga naar {{url}} en voer bovenstaande code in.`,waiting:`Wachten op je goedkeuring…`,cancel:`Annuleren`},profiles:{title:`Je Orca Cloud-profielen ({{count}})`,refresh:`Vernieuwen`,empty:`Nog geen profielen gevonden in je Orca Cloud-account.`},toast:{disconnected:`Verbinding met Orca Cloud verbroken`},errors:{startFailed:`Koppelen met Orca Cloud kon niet worden gestart.`,denied:`De koppeling is geweigerd in Orca Cloud.`,expired:`De koppelcode is verlopen. Klik op Verbinden om opnieuw te proberen.`,pollFailed:`De verbinding ging verloren tijdens het wachten op goedkeuring. Probeer het opnieuw.`}},localProfiles:{title:`Lokale profielen`,subtitle:`Slicepresets importeren en beheren vanuit OrcaSlicer`,import:`Profielen importeren`,importDesc:`Sleep .bbscfg-, .bbsflmt-, .orca_filament-, .zip- of .json-bestanden hierheen`,importing:`Importeren...`,search:`Lokale presets zoeken...`,noPresets:`Nog geen lokale presets`,noSearchResults:`Geen presets komen overeen met je zoekopdracht`,badge:`Lokaal`,edit:`Bewerken`,delete:`Verwijderen`,cancel:`Annuleren`,deleteConfirmTitle:`Preset verwijderen`,deleteConfirm:`Weet je zeker dat je deze preset wilt verwijderen? Dit kan niet ongedaan worden gemaakt.`,source:`Bron`,inheritsFrom:`Erft van`,filamentType:`Type`,vendor:`Leverancier`,compatiblePrinters:`Printers`,nozzleTemp:`Nozzletemp.`,cost:`Kosten`,density:`Dichtheid`,pressureAdvance:`Pressure Advance`,filament:`Filament`,process:`Proces`,printer:`Printer`,toast:{importSuccess:`{{count}} preset(s) geïmporteerd`,importSkipped:`{{count}} preset(s) overgeslagen (duplicaten)`,importError:`{{count}} fout(en) tijdens importeren`,deleted:`Preset verwijderd`,updated:`Preset bijgewerkt`}},connectedAs:`Verbonden als`,signInExpiredTitle:`Bambu Cloud-login verlopen`,signInExpiredBody:`Bambu Lab accepteert het opgeslagen token niet meer. Log opnieuw in om cloudprofielen, MakerWorld-imports en firmwarecontroles te herstellen.`,logout:`Uitloggen`,noLogoutPermission:`Je hebt geen toestemming om uit te loggen`,failedToLoad:`Profielen laden mislukt`,retry:`Opnieuw proberen`,time:{justNow:`Zojuist`,minsAgo:`{{count}}m geleden`,hoursAgo:`{{count}}u geleden`,daysAgo:`{{count}}d geleden`},toast:{loggedOut:`Uitgelogd`},login:{title:`Verbinden met Bambu Cloud`,subtitle:`Synchroniseer je slicerpresets tussen apparaten`,email:`E-mail`,password:`Wachtwoord`,region:`Regio`,regionGlobal:`Wereldwijd`,regionChina:`China`,verificationCode:`Verificatiecode`,totpCode:`Authenticatorcode`,checkEmail:`Controleer je e-mail ({{email}}) op een 6-cijferige code`,enterTotpHint:`Voer de 6-cijferige code uit je authenticator-app in`,accessToken:`Toegangstoken`,accessTokenHint:`Plak je Bambu Cloud-toegangstoken. Accounts in de China-regio moeten deze methode gebruiken (telefoongebonden — inloggen via e-mail niet beschikbaar). Zie de wiki voor het ophalen van het token uit MakerWorld-cookies.`,back:`Terug`,loginButton:`Inloggen`,verifyButton:`Verifiëren`,setTokenButton:`Token instellen`,useToken:`In plaats daarvan toegangstoken gebruiken`,captchaTitle:`Bambu Cloud vraagt om een CAPTCHA`,captchaBody:`Bambu controleert je netwerk voordat inloggen wordt geaccepteerd en deze controle kan niet vanuit Bambuddy worden beantwoord. Je e-mailadres en wachtwoord zijn niet het probleem. De blokkering is gekoppeld aan je openbare IP-adres en verdwijnt normaal vanzelf binnen enkele uren — herhaaldelijk opnieuw proberen laat de blokkering langer duren. Gebruik om nu in te loggen een toegangstoken uit een browsersessie.`,useEmail:`In plaats daarvan inloggen met e-mail`,toast:{loggedIn:`Succesvol ingelogd`,codeSent:`Verificatiecode naar je e-mail gestuurd`,enterTotp:`Voer code uit je authenticator-app in`,tokenSet:`Token succesvol ingesteld`}},presets:{myPreset:`Mijn preset (bewerkbaar)`,duplicate:`Dupliceren`,editable:`Bewerkbaar`,failedToLoadDetails:`Presetdetails laden mislukt`,deleteConfirm:`Deze preset verwijderen?`,deleteWarning:`Hiermee wordt "{{name}}" permanent uit Bambu Cloud verwijderd. Dit kan niet ongedaan worden gemaakt.`,noDuplicatePermission:`Je hebt geen toestemming om presets te dupliceren`,noEditPermission:`Je hebt geen toestemming om presets te bewerken`,noDeletePermission:`Je hebt geen toestemming om presets te verwijderen`,types:{filament:`Filamentpreset`,printer:`Printerpreset`,process:`Procespreset`},toast:{deleted:`Preset verwijderd`,created:`Preset gemaakt`,updated:`Preset bijgewerkt`,duplicated:`Preset gedupliceerd`,fieldAdded:`Veld "{{key}}" toegevoegd`,exported:`Preset geëxporteerd`},baseLabel:`Basis: {{name}}`,currentLabel:`Huidig: {{name}}`,newPreset:`Nieuwe preset`,editPreset:`Preset bewerken`,duplicatePreset:`Preset dupliceren`,createNewPreset:`Nieuwe preset maken`,customizeSettings:`Instellingen voor je nieuwe preset aanpassen`,compareWithBase:`Vergelijken met basispreset`,compare:`Vergelijken`,basePreset:`Basispreset`,selectBasePreset:`Basispreset selecteren...`,presetName:`Presetnaam`,myCustomPreset:`Mijn aangepaste preset`,inheritsFrom:`Erft van`,dropJsonToImport:`Sleep JSON om te importeren`,tabs:{common:`Algemeen`,allFields:`Alle velden`},availableFields:`Beschikbare velden`,searchFieldsPlaceholder:`Velden zoeken...`,noMatchingFields:`Geen overeenkomende velden`,allFieldsAdded:`Alle velden toegevoegd`,addCustomField:`Aangepast veld toevoegen`,yourOverrides:`Je overschrijvingen`,noOverridesYet:`Nog geen overschrijvingen`,clickFieldsToAdd:`Klik links op velden om ze toe te voegen`,saveAsTemplate:`Opslaan als sjabloon`,jsonTip:`Tip: sleep een .json-bestand ergens in dit venster om instellingen te importeren`},cloudView:{searchPlaceholder:`Presets zoeken...`,templates:`Sjablonen`,refresh:`Vernieuwen`,newPreset:`Nieuwe preset`,clearFilters:`Filters wissen`,compareMode:`Vergelijkingsmodus`,selectAnotherPreset:`Selecteer een andere {{type}}-preset`,clickTwoPresets:`Klik op twee presets van hetzelfde type om te vergelijken`,selectFirst:`1. Selecteer eerste`,selectSecond:`2. Selecteer tweede`,compareNow:`Nu vergelijken`,lastSynced:`Laatst gesynchroniseerd:`,showingCount:`{{showing}} van {{total}} presets weergegeven`,noPresetsFound:`Geen presets gevonden`,columns:{filament:`Filament`,process:`Proces`,printer:`Printer`},noFilamentPresets:`Geen filamentpresets`,noProcessPresets:`Geen procespresets`,noPrinterPresets:`Geen printerpresets`,filters:{type:`Type`,owner:`Eigenaar`,printer:`Printer`,nozzle:`Nozzle`,filament:`Filament`,layer:`Laag`,all:`Alle`,myPresets:`Mijn presets`,builtIn:`Ingebouwd`,process:`Proces`},noTemplatesPermission:`Je hebt geen toestemming om sjablonen te beheren`,noRefreshPermission:`Je hebt geen toestemming om profielen te vernieuwen`,noCreatePermission:`Je hebt geen toestemming om presets te maken`},templates:{title:`Snelle sjablonen`,noTemplates:`Nog geen sjablonen`,createFirst:`Maak sjablonen vanuit de preseteditor`,typeFilter:`Type:`,deleteTitle:`Sjabloon verwijderen`,deleteWarning:`Deze actie kan niet ongedaan worden gemaakt`,deleteConfirm:`Weet je zeker dat je "{{name}}" wilt verwijderen?`,namePlaceholder:`Sjabloonnaam`,descriptionPlaceholder:`Beschrijving`,settingsJson:`Instellingen (JSON)`,fieldsCount:`{{count}} velden`,shownInModals:`Getoond in vensters`,hiddenInModals:`Verborgen in vensters`,apply:`Toepassen`,toast:{deleted:`Sjabloon verwijderd`,updated:`Sjabloon bijgewerkt`,created:`Sjabloon gemaakt`,applied:`Sjabloon toegepast`}}},support:{debugLoggingActive:`Debuglogboekregistratie is actief`,manageLogs:`Beheren`,collectItem7:`Printerverbinding en firmwareversies`,collectItem8:`Integratiestatus (Spoolman, MQTT, HA)`,collectItem9:`Netwerkinterfaces (alleen subnetten)`,collectItem10:`Python-pakketversies`,collectItem11:`Databasegezondheidscontroles`,collectItem12:`Docker-omgevingsdetails`,bundleGenerating:`Bundel genereren...`,bundleStepConnection:`Printerverbindingscontroles uitvoeren`,bundleStepVirtualPrinters:`Installatiecontroles virtuele printer uitvoeren`,bundleStepLogScan:`Recente logboeken scannen op bekende problemen`,bundleStepBuild:`Supportbundel-ZIP maken`},fileManager:{variants:{badge:`{{count}} versies`,groupAction:`Als versies groeperen`,groupTooltip:`Markeer deze bestanden als dezelfde taak, gesliced voor verschillende printers`,grouped:`{{count}} bestanden als versies gegroepeerd`,printAlternatives:`Afdrukken ({{count}} alternatieven)`},title:`Bestandsbeheer`,subtitle:`Organiseer en beheer je afdrukbestanden`,uploadFiles:`Bestanden uploaden`,newFolder:`Nieuwe map`,folderName:`Mapnaam`,folderNamePlaceholder:`bijv. Functionele onderdelen`,renameFile:`Bestand hernoemen`,renameFolder:`Map hernoemen`,invalidFilenameChar:`Het teken "{{char}}" is niet toegestaan in bestandsnamen voor afdrukken. De SD-kaart van de printer weigert: < > : " / \\ | ? *`,moveFiles:`{{count}} bestand(en) verplaatsen`,rootNoFolder:`Hoofdmap (geen map)`,current:`huidig`,linkFolder:`Map koppelen`,linkFolderDescription:`Koppel "{{name}}" aan een project of archief voor snelle toegang.`,project:`Project`,archive:`Archief`,noProjectsFound:`Geen projecten gevonden`,noArchivesFound:`Geen archieven gevonden`,unlink:`Ontkoppelen`,link:`Koppelen`,dragDropFiles:`Sleep bestanden hierheen`,dropFilesHere:`Zet bestanden hier neer`,releaseToUpload:`Loslaten om te uploaden`,orClickToBrowse:`of klik om te bladeren`,allFileTypesSupported:`Alle bestandstypen worden ondersteund. ZIP-bestanden worden uitgepakt.`,zipFilesDetected:`ZIP-bestanden gedetecteerd`,zipExtractOptions:`ZIP-bestanden worden uitgepakt. Kies hoe de mapstructuur moet worden verwerkt:`,preserveZipStructure:`Mapstructuur uit ZIP behouden`,createFolderFromZip:`Map maken op basis van ZIP-bestandsnaam`,stlThumbnailGeneration:`STL-miniaturen genereren`,zipMayContainStl:`ZIP-bestanden kunnen STL-bestanden bevatten. Miniaturen kunnen tijdens het uitpakken worden gegenereerd.`,thumbnailsCanBeGenerated:`Voor STL-bestanden kunnen miniaturen worden gegenereerd. Grote modellen kunnen langer duren om te verwerken.`,generateThumbnailsForStl:`Miniaturen genereren voor STL-bestanden`,threemfDetected:`3MF-bestanden gedetecteerd`,threemfExtractionInfo:`Printermodel, materiaal, kleur en afdrukinstellingen worden automatisch uit 3MF-bestanden gehaald.`,willBeExtracted:`Wordt uitgepakt`,filesExtracted:`{{count}} bestanden uitgepakt`,uploadComplete:`Upload voltooid: {{succeeded}} geslaagd`,uploadFailed:`Upload mislukt`,zipFilesFailed:`{{count}} bestanden mislukt`,uploading:`Uploaden...`,changeLink:`Koppeling wijzigen...`,linkTo:`Koppelen aan...`,linkToProjectOrArchive:`Koppelen aan project of archief`,generateThumbnail:`Miniatuur genereren`,generateThumbnails:`Miniaturen genereren`,generateThumbnailsForMissing:`Miniaturen genereren voor STL-bestanden die ze missen`,gridView:`Rasterweergave`,listView:`Lijstweergave`,lowDiskSpaceWarning:`Waarschuwing weinig schijfruimte`,lowDiskSpaceDetails:`Slechts {{free}} vrij van {{total}} totaal. De drempel is in de instellingen ingesteld op {{threshold}} GB.`,files:`Bestanden`,folders:`Mappen`,size:`Grootte`,free:`Vrij`,allFiles:`Alle bestanden`,allExternal:`Extern`,externalIsEmpty:`Geen externe bestanden`,externalEmptyDescription:`Bestanden in je gekoppelde externe mappen verschijnen hier.`,wrap:`Regelafbreking`,enableTextWrapping:`Tekstterugloop inschakelen`,disableTextWrapping:`Tekstterugloop uitschakelen`,collapse:`Inklappen`,collapseFoldersByDefault:`Mappen standaard inklappen`,expandFoldersByDefault:`Mappen standaard uitklappen`,folderSort:`Mappen sorteren`,folderSortByName:`Op naam`,folderSortByActivity:`Op recente activiteit`,dragToResizeTooltip:`Sleep om grootte te wijzigen, dubbelklik om te resetten`,searchFiles:`Bestanden zoeken...`,searchSubfoldersHint:`Inclusief submappen`,readme:{truncated:`Afgekapt`,show:`README tonen`,hide:`README verbergen`,label:`README`},tags:{title:`Tags`,subtitle:`Label bestanden voor flexibele filtering — speelgoed, kindveilig, alleen PETG, wat je maar wilt.`,manage:`Tags`,manageTitle:`Tagcatalogus beheren`,add:`Nieuwe tag`,edit:`Tag hernoemen`,name:`Naam`,fileCount:`Bestanden`,empty:`Nog geen tags. Maak er een om bestanden te gaan labelen.`,noMatches:`Geen overeenkomende tags.`,createPlaceholder:`bijv. speelgoed, kindveilig, petg`,createButton:`Maken`,nameRequired:`Naam is verplicht.`,searchPlaceholder:`Tags filteren...`,created:`Tag gemaakt.`,updated:`Tag hernoemd.`,deleted:`Tag verwijderd.`,saveFailed:`Tag kon niet worden opgeslagen.`,deleteFailed:`Tag kon niet worden verwijderd.`,applyFailed:`Tags konden niet worden toegepast.`,applyAdd:`Tags toevoegen`,applyRemove:`Tags verwijderen`,applyAddSuccess:`{{count}} tag(s) toegevoegd aan {{files}} bestand(en).`,applyRemoveSuccess:`{{count}} tag(s) verwijderd van {{files}} bestand(en).`,actionAdd:`Toevoegen aan geselecteerde bestanden`,actionRemove:`Verwijderen van geselecteerde bestanden`,tagAction:`Tag`,bulkTitle:`{{count}} geselecteerde bestand(en) taggen`,bulkTooltip:`Tags toevoegen aan of verwijderen van elk geselecteerd bestand.`,noPermission:`Je hebt geen toestemming om bestanden te taggen.`,filterLabel:`Filteren op:`,clearAll:`Alles wissen`,confirmDelete:`Tag "{{name}}" verwijderen?`,confirmDeleteMessage:`Hiermee wordt de tag uit de catalogus verwijderd. Bestanden behouden hun andere tags.`,confirmDeleteInUseMessage:`Deze tag staat op {{count}} bestand(en). Bij verwijderen verdwijnt het label van al deze bestanden; de bestanden zelf blijven intact.`,editAria:`{{name}} bewerken`,deleteAria:`{{name}} verwijderen`},allTypes:`Alle typen`,prints:`Afdrukken`,ascending:`Oplopend`,descending:`Aflopend`,showModified:`Wijzigingsdatums tonen`,hideModified:`Wijzigingsdatums verbergen`,lastModified:`Laatst gewijzigd`,lastActivity:`Laatste activiteit`,resultsCount:`{{showing}} van {{total}} bestanden`,selectAll:`Alles selecteren`,deselectAll:`Alles deselecteren`,selected:`{{count}} geselecteerd`,adding:`Toevoegen...`,loadingFiles:`Bestanden laden...`,folderIsEmpty:`Map is leeg`,noFilesYet:`Nog geen bestanden`,folderEmptyDescription:`Upload bestanden of verplaats bestanden naar deze map om te beginnen.`,noFilesDescription:`Upload bestanden om je afdrukgerelateerde bestanden te organiseren.`,noMatchingFiles:`Geen overeenkomende bestanden`,noMatchingFilesDescription:`Geen bestanden komen overeen met je huidige zoek- of filtercriteria.`,clearFilters:`Filters wissen`,printedCount:`{{count}}x afgedrukt`,uploadedBy:`Geüpload door`,deleteFolder:`Map verwijderen`,deleteFile:`Bestand verwijderen`,deleteFilesCount:`{{count}} bestanden verwijderen`,deleteFolderConfirm:`Weet je zeker dat je deze map wilt verwijderen? Alle bestanden erin worden ook verwijderd.`,deleteFileConfirm:`Weet je zeker dat je dit bestand wilt verwijderen?`,deleteFilesConfirm:`Weet je zeker dat je {{count}} geselecteerde bestanden wilt verwijderen? Deze actie kan niet ongedaan worden gemaakt.`,deleting:`Verwijderen...`,noPermissionRenameFolder:`Je hebt geen toestemming om mappen te hernoemen`,noPermissionLinkFolder:`Je hebt geen toestemming om mappen te koppelen`,noPermissionDeleteFolder:`Je hebt geen toestemming om mappen te verwijderen`,onlyEmptyFoldersDeletable:`Je kunt alleen lege mappen verwijderen`,noPermissionPrint:`Je hebt geen toestemming om af te drukken`,noPermissionAddToQueue:`Je hebt geen toestemming om aan de wachtrij toe te voegen`,noPermissionSlice:`Je hebt geen toestemming om bestanden te slicen`,noPermissionDownload:`Je hebt geen toestemming om bestanden te downloaden`,noPermissionPreview:`Je hebt geen toestemming om bestanden te bekijken`,preview3d:`3D-voorbeeld`,noPermissionRenameFile:`Je hebt geen toestemming om dit bestand te hernoemen`,noPermissionGenerateThumbnail:`Je hebt geen toestemming om miniaturen te genereren`,noPermissionDeleteFile:`Je hebt geen toestemming om dit bestand te verwijderen`,noPermissionCreateFolder:`Je hebt geen toestemming om mappen te maken`,noPermissionUpload:`Je hebt geen toestemming om bestanden te uploaden`,noPermissionMoveFiles:`Je hebt geen toestemming om bestanden te verplaatsen`,noPermissionDeleteFiles:`Je hebt geen toestemming om bestanden te verwijderen`,linkExternal:`Extern koppelen`,linkExternalFolder:`Externe map koppelen`,linkExternalFolderDescription:`Koppel een hostmap (NAS, USB, netwerkshare) aan Bestandsbeheer. Bestanden worden niet gekopieerd — ze worden rechtstreeks vanaf het oorspronkelijke pad benaderd.`,externalFolderNamePlaceholder:`bijv. NAS-afdrukken`,externalPath:`Hostpad`,externalPathHelp:`Absoluut pad naar de map op de Docker-host. Moet als bind-mount in de container zijn gekoppeld.`,readOnly:`Alleen-lezen`,readOnlyHelp:`voorkomt uploads en verwijderingen`,showHiddenFiles:`Verborgen bestanden tonen (dotfiles)`,externalFolder:`Externe map`,scanFolder:`Scannen`,toast:{folderCreated:`Map gemaakt`,openInSlicerFailed:`Kon niet openen in slicer`,folderDeleted:`Map verwijderd`,fileDeleted:`Bestand verwijderd`,filesDeleted:`{{count}} bestanden verwijderd`,filesMoved:`Bestanden verplaatst`,folderLinked:`Map gekoppeld`,folderUnlinked:`Map ontkoppeld`,externalFolderLinked:`Externe map gekoppeld en gescand`,folderScanned:`Scan voltooid: {{added}} toegevoegd, {{removed}} verwijderd`,addedToQueue:`{{count}} bestand(en) aan wachtrij toegevoegd`,addedToQueuePartial:`{{added}} bestand(en) toegevoegd, {{failed}} mislukt`,failedToAddToQueue:`Bestanden toevoegen mislukt: {{error}}`,fileRenamed:`Bestand hernoemd`,folderRenamed:`Map hernoemd`,thumbnailsGenerated:`{{count}} miniatuur/miniaturen gegenereerd`,thumbnailsGeneratedPartial:`{{succeeded}} miniatuur/miniaturen gegenereerd, {{failed}} mislukt`,noStlMissingThumbnails:`Geen STL-bestanden zonder miniaturen`,failedToGenerateThumbnails:`Miniaturen genereren mislukt: {{error}}`,thumbnailGenerated:`Miniatuur gegenereerd`,failedToGenerateThumbnail:`Miniatuur genereren mislukt: {{error}}`}},projects:{parentLabel:`Bovenliggend project`,parentNone:`Geen (project op hoogste niveau)`,parentHint:`Plaats dit project onder een ander project zodat de cijfers worden opgeteld in een hoofdproject`,partOf:`Onderdeel van {{name}}`,subProjectCount:`{{count}} subprojecten`,subProjectsOf:`Subprojecten van {{name}}`,collapseSubProjects:`Subprojecten inklappen`,expandSubProjects:`Subprojecten uitklappen`,title:`Projecten`,subtitle:`Organiseer en volg je 3D-printprojecten`,newProject:`Nieuw project`,editProject:`Project bewerken`,deleteProject:`Project verwijderen`,projectName:`Projectnaam`,description:`Beschrijving`,noProjects:`Nog geen projecten`,noProjectsFiltered:`Geen {{status}} projecten`,noProjectsFilteredHelp:`Je hebt geen {{status}} projecten. Projecten verschijnen hier wanneer hun status verandert.`,createFirst:`Maak je eerste project om gerelateerde afdrukken te organiseren, voortgang bij te houden en je builds te beheren.`,createFirstButton:`Maak je eerste project`,create:`Maken`,files:`Bestanden`,prints:`Afdrukken`,plates:`platen`,parts:`onderdelen`,lastModified:`Laatst gewijzigd`,deleteConfirm:`Weet je zeker dat je dit project wilt verwijderen? Archieven en wachtrij-items worden ontkoppeld maar niet verwijderd.`,addFiles:`Bestanden toevoegen`,removeFile:`Bestand verwijderen`,viewDetails:`Details bekijken`,namePlaceholder:`bijv. Voron 2.4 Build`,descriptionPlaceholder:`Optionele beschrijving...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URL moet beginnen met http:// of https://`,openExternalUrl:`Project-URL openen`,coverImageLabel:`Omslagfoto`,coverImageAlt:`Projectomslagfoto`,coverImageUpload:`Uploaden`,coverImageReplace:`Vervangen`,coverImageRemove:`Verwijderen`,color:`Kleur`,targetPlates:`Doelaantal platen`,targetPlatesPlaceholder:`bijv. 25`,targetPlatesHelp:`Aantal afdruktaken`,targetParts:`Doelaantal onderdelen`,targetPartsPlaceholder:`bijv. 150`,targetPartsHelp:`Totaal aantal benodigde objecten`,targetSets:`Kopieën per bestand`,targetSetsPlaceholder:`bijv. 10`,targetSetsHelp:`Aantal keren dat elk afdrukbaar bestand moet worden afgedrukt`,tagsLabel:`Tags (door komma's gescheiden)`,tagsPlaceholder:`bijv. voron, functioneel, cadeau`,dueDate:`Einddatum`,priority:`Prioriteit`,priorityLow:`Laag`,priorityNormal:`Normaal`,priorityHigh:`Hoog`,priorityUrgent:`Urgent`,statusActive:`Actief`,statusCompleted:`Voltooid`,statusArchived:`Gearchiveerd`,done:`Klaar`,completed:`voltooid`,failed:`mislukt`,inQueue:`in wachtrij`,noPrintsYet:`Nog geen afdrukken`,printJobs:`Afdruktaken (platen)`,partsPrinted:`Afgedrukte onderdelen`,failedParts:`Mislukte onderdelen`,import:`Importeren`,export:`Exporteren`,importProject:`Project importeren`,exportAll:`Alle projecten exporteren`,loading:`Projecten laden...`,noEditPermission:`Je hebt geen toestemming om projecten te bewerken`,noDeletePermission:`Je hebt geen toestemming om projecten te verwijderen`,noCreatePermission:`Je hebt geen toestemming om projecten te maken`,noImportPermission:`Je hebt geen toestemming om projecten te importeren`,noExportPermission:`Je hebt geen toestemming om projecten te exporteren`,toast:{created:`Project gemaakt`,updated:`Project bijgewerkt`,deleted:`Project verwijderd`,imported:`Project geïmporteerd`,multipleImported:`{{count}} projecten geïmporteerd`,importFailed:`Importeren mislukt`,exported:`Projecten geëxporteerd (alleen metadata)`}},projectDetail:{notFound:`Project niet gevonden`,backToProjects:`Terug naar Projecten`,export:`Exporteren`,exportProject:`Project exporteren`,noExportPermission:`Je hebt geen toestemming om projecten te exporteren`,noEditPermission:`Je hebt geen toestemming om projecten te bewerken`,partOf:`Onderdeel van:`,priorityLabel:`Prioriteit:`,noPrints:`Nog geen afdrukken in dit project`,status:{active:`Actief`,completed:`Voltooid`,archived:`Gearchiveerd`},priority:{low:`Laag`,normal:`Normaal`,high:`Hoog`,urgent:`Urgent`},dueDate:{overdue:`Te laat`,today:`Vandaag te doen`,daysLeft:`{{count}} dagen resterend`},progress:{platesProgress:`Voortgang platen`,partsProgress:`Voortgang onderdelen`,setsProgress:`Volledige sets`,sets:`sets`,setsHint:`Een set is compleet zodra elk afdrukbaar bestand dit aantal heeft bereikt`,printJobs:`afdruktaken`,parts:`onderdelen`,percentComplete:`{{percent}}% voltooid`,remaining:`{{count}} resterend`},stats:{printJobs:`Afdruktaken`,total:`totaal`,failed:`{{count}} mislukt`,partsPrinted:`{{count}} onderdelen afgedrukt`,printTime:`Afdruktijd`,filamentUsed:`Filament gebruikt`},cost:{title:`Kostentracking`,filamentCost:`Filamentkosten`,energy:`Energie`,totalCost:`Geschatte kosten`,total:`Totaal`,includesBom:`incl. materiaallijst`,budget:`Budget`,remaining:`Resterend`},subProjects:{title:`Subprojecten ({{count}})`,jobs:`{{count}} taken`},rollup:{title:`Inclusief {{count}} subprojecten`,progress:`Totale voortgang`,percentComplete:`{{percent}}% voltooid`},notes:{title:`Notities`,noEditPermission:`Je hebt geen toestemming om notities te bewerken`,placeholder:`Voeg notities over dit project toe...`,empty:`Nog geen notities. Klik op Bewerken om notities toe te voegen.`},files:{title:`Bestanden`,linkFolders:`Koppel mappen vanuit Bestandsbeheer`,forQuickAccess:`aan dit project voor snelle toegang.`,fileCount:`{{count}} bestand(en)`,empty:`Geen mappen gekoppeld. Ga naar Bestandsbeheer en koppel een map aan dit project.`,printedCount:`{{count}} keer afgedrukt`,progressTooltip:`{{done}} van {{target}} voltooide afdrukken`,noFiles:`Geen bestanden in deze map.`},bom:{title:`Materiaallijst`,acquired:`{{completed}}/{{total}} aangeschaft`,showAll:`Alles tonen`,hideDone:`Voltooide verbergen`,addPart:`Onderdeel toevoegen`,noAddPermission:`Je hebt geen toestemming om onderdelen toe te voegen`,partNamePlaceholder:`Onderdeelnaam (bijv. M3x8-schroeven)`,partName:`Onderdeelnaam`,qty:`Aantal`,price:`Prijs ({{currency}})`,sourcingUrlPlaceholder:`Inkoop-URL (optioneel)`,remarksPlaceholder:`Opmerkingen (optioneel)`,deletePart:`Onderdeel verwijderen`,deleteConfirm:`Weet je zeker dat je "{{name}}" wilt verwijderen?`,noUpdatePermission:`Je hebt geen toestemming om onderdelen bij te werken`,noEditPermission:`Je hebt geen toestemming om onderdelen te bewerken`,noDeletePermission:`Je hebt geen toestemming om onderdelen te verwijderen`,totalCost:`Totale kosten:`,empty:`Geen onderdelen in de materiaallijst. Voeg hardware, elektronica of andere componenten toe om bij te houden wat nog moet worden ingekocht.`},timeline:{title:`Activiteitentijdlijn`,empty:`Nog geen activiteit.`},template:{saveAsTemplate:`Opslaan als sjabloon`,noCreatePermission:`Je hebt geen toestemming om sjablonen te maken`},queue:{title:`Wachtrij`,viewAll:`Alles bekijken`,printing:`{{count}} bezig met afdrukken`,queued:`{{count}} in wachtrij`},prints:{title:`Afdrukken ({{count}})`},toast:{projectUpdated:`Project bijgewerkt`,partAdded:`Onderdeel toegevoegd`,partRemoved:`Onderdeel verwijderd`,exportFailed:`Export mislukt`,projectExported:`Project geëxporteerd`,templateCreated:`Sjabloon gemaakt`}},system:{title:`Systeeminformatie`,version:`Versie`,uptime:`Uptime`,cpuUsage:`CPU-gebruik`,memoryUsage:`Geheugengebruik`,diskUsage:`Schijfgebruik`,networkInfo:`Netwerkinformatie`,logs:`Logboeken`,debugMode:`Debugmodus`,enableDebug:`Debuglogboekregistratie inschakelen`,disableDebug:`Debuglogboekregistratie uitschakelen`,downloadLogs:`Logboeken downloaden`,clearLogs:`Logboeken wissen`,dockerInfo:`Docker-informatie`,containerName:`Containernaam`,imageName:`Imagenaam`,platform:`Platform`,architecture:`Architectuur`},sponsors:{sectionTitle:`Onafhankelijk en door de community gefinancierd`,tagline:`Bambuddy is gratis en blijft dat omdat mensen ervoor kiezen het te ondersteunen. Geen durfkapitaal, geen cloud-lock-in.`,viewSupporters:`Supporters bekijken`,toastPrints:`Je hebt {{count}} afdrukken voltooid met Bambuddy. Bambuddy blijft gratis dankzij zijn supporters.`,toastCost:`Je hebt {{total}} aan filament bijgehouden met Bambuddy. Bekijk wie het project onafhankelijk houdt.`,toastArchives:`{{count}} afdrukken gearchiveerd met Bambuddy. Bekijk wie het onafhankelijk houdt.`,toastAnniversary:`Eén jaar met Bambuddy! Bekijk wie het project onafhankelijk houdt.`,toastVersionUpdate:`Bijgewerkt naar v{{version}}. Bambuddy blijft gratis dankzij zijn supporters.`,toastBusiness:`Gebruik je Bambuddy met {{count}} printers? Er is een supportplan voor teams — prioriteitsoplossingen, facturering en direct contact met de beheerder.`,businessCta:`Bambuddy voor bedrijven`,businessTitle:`Bambuddy voor bedrijven`,businessTagline:`Je gebruikt {{count}} printers. Prioriteitssupport, commerciële licenties en facturering zijn beschikbaar voor teams en printfarms.`},library:{title:`Filamentbibliotheek`,addFilament:`Filament toevoegen`,editFilament:`Filament bewerken`,deleteFilament:`Filament verwijderen`,vendor:`Leverancier`,material:`Materiaal`,color:`Kleur`,kFactor:`K-factor`,temperature:`Temperatuur`,noFilaments:`Geen filamenten in bibliotheek`,deleteConfirm:`Weet je zeker dat je dit filament wilt verwijderen?`,importFromPrinter:`Importeren vanaf printer`,exportToFile:`Exporteren naar bestand`,runWithPipeline:{actionLabel:`Uitvoeren met pipeline`,noPermission:`Je hebt geen toestemming om pipelines uit te voeren`,modalTitle:`Uitvoeren met pipeline`,confirmTitle:`Run bevestigen`,confirmIntro:`Pre-flight heeft problemen met deze run gevonden`,sourceHint:`Bron`,pipelineHint:`Pipeline`,targetHint:`Doel`,pipelineListAria:`Beschikbare pipelines`,runAnyway:`Toch uitvoeren`,loading:`Laden…`,empty:`Nog geen pipelines opgeslagen. Open het Slice-dialoogvenster en klik op "Opslaan als pipeline" om er een te maken.`,noTarget:`Geen doelprinter ingesteld`,noTargetMessage:`Deze pipeline heeft geen doelprinter ingesteld. Open hem in Instellingen om er een te kiezen.`,copies:`Kopieën`,copiesHint:`max. {{n}}`,classTarget:`Elke {{model}}`,toast:{started:`Pipeline-run gestart`,failed:`Run starten mislukt`},issue:{printerNotSet:`Geen doelprinter ingesteld voor deze pipeline.`,printerNotFound:`Doelprinter bestaat niet meer.`,printerDisabled:`Doelprinter is uitgeschakeld.`,printerOffline:`Doelprinter is offline.`,filamentType:`Filamentsleuf {{slot}}: verwacht {{expected}}, AMS heeft {{actual}}`,filamentColor:`Filamentsleuf {{slot}}: kleur wijkt af (verwacht {{expected}}, AMS heeft {{actual}})`,amsSlotMissing:`AMS-sleuf {{slot}} is niet beschikbaar op deze printer`,filamentUnverified:`Filamentsleuf {{slot}} komt uit een cloud-/standaardpreset en kon niet statisch worden geverifieerd.`,noClassMatches:`Geen printers in deze installatie komen overeen met de doelmodelklasse van de pipeline ({{expected}}).`,classNotSet:`Pipelinedoel is ingesteld op een printerklasse, maar er is geen model gekozen.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Slicerstandaarden weergegeven: je slicer-sidecar is ouder dan deze functie en kan de waarden van een preset niet rapporteren. Werk de sidecar-image bij om ze te zien. Alles wat je niet wijzigt blijft de preset gebruiken.`,presetValuesNotConfigured:`Slicerstandaarden weergegeven: er is geen slicer-sidecar geconfigureerd, dus de waarden van een preset kunnen niet worden gelezen. Alles wat je niet wijzigt blijft de preset gebruiken.`,presetValuesSidecarUnavailable:`Slicerstandaarden weergegeven: de slicer-sidecar antwoordde niet, dus de waarden van een preset kunnen niet worden gelezen. Alles wat je niet wijzigt blijft de preset gebruiken.`,presetValuesUnavailable:`Slicerstandaarden weergegeven: de eigen waarden van de gekozen preset konden niet worden gelezen. Alles wat je niet wijzigt blijft de preset gebruiken.`,filamentDefault:`Standaard`,fromFile:`uit bestand`,fromFileHint:`De ontwerper heeft dit in het bronbestand gewijzigd. De waarde is {{value}}.`,fromFilePrinterCoupled:`printer van ontwerper`,fromFilePrinterCoupledHint:`Afgestemd op de printer waarvoor dit bestand is ontworpen -- kan op jouw printer verkeerd of buiten bereik zijn.`,fromFileOverridesPreset:`overschrijft preset`,fromFileOverridesPresetHint:`Het bestand stelt dit in op {{value}}, terwijl de gekozen preset {{preset}} gebruikt. Vink dit alleen aan als het bestand voorrang moet krijgen.`,useFromFile:`Waarde uit het bronbestand gebruiken voor {{option}}`,otherFromFile:`Andere instellingen uit dit bestand`,fromFileSummary:`De ontwerper heeft {{count}} procesinstellingen in dit bestand gewijzigd. Alleen de instellingen die je aanvinkt worden gebruikt.`,fromFileUseAll:`Instellingen van de ontwerper gebruiken`,fromFileUseAllHint:`Vinkt de instellingen aan die tussen printers overdraagbaar zijn. Instellingen die zijn afgestemd op de eigen printer van de ontwerper en instellingen die de gekozen preset definiëren blijven uitgeschakeld.`,fromFileClear:`{{count}} wissen`,loading:`Slicerinstellingen laden…`,mode:{simple:`Eenvoudig`,advanced:`Geavanceerd`,expert:`Expert`},searchPlaceholder:`Instellingen zoeken`,resetAll:`{{count}} resetten`,resetOption:`Terugzetten naar standaard`,noMatches:`Geen instellingen komen overeen met deze zoekopdracht.`},slice:{filamentSlotUnset:`niet ingesteld`,processSettingsEmbedded:`Niet gebruikt zolang "Ingebouwde instellingen van het bestand gebruiken" is ingeschakeld -- de eigen instellingen van het bestand sturen deze slice aan.`,processSettingsInactive:`Inactief`,presetsHidden:`{{count}} verborgen`,showAllPresets:`Alles tonen`,showFewerPresets:`Minder tonen`,processSettings:`Procesinstellingen`,processSettingsHint:`Pas de gekozen preset aan voor deze slice. Alles wat je niet aanraakt blijft zoals de preset het definieert.`,processSettingsChanged:`{{count}} gewijzigd`,processSettingsUnchanged:`Presetstandaarden`,title:`Model slicen`,action:`Slicen`,actionAll:`Alle {{count}} platen slicen`,actionAllTitle:`Slice elke plaat naar één uitvoer met meerdere platen (één archief). Filamentselectie omvat elke sleuf die het project definieert.`,allPlatesToggle:`Alle {{count}} platen slicen`,slicing:`Slicen…`,printer:`Printerprofiel`,process:`Procesprofiel`,filament:`Filamentprofiel`,filamentSlot:`Filament {{index}} ({{type}})`,filamentColour:`Filamentkleur`,selectPreset:`— Selecteer een preset —`,loadingPresets:`Presets laden…`,analyzingPlateFilaments:`Filamenten op plaat analyseren…`,analyzingPlateFilamentsHint:`Een voorbeeldslice uitvoeren om te ontdekken welke AMS-sleuven deze plaat gebruikt. Daarna gecachet — opnieuw openen is direct.`,previewToast:`{{name}} analyseren — {{elapsed}}`,previewWithProgress:`{{name}} analyseren — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— niet gebruikt door deze plaat`,noPresetsForSlot:`Geen presets beschikbaar`,otherPrinters:`Andere printers`,presetsLoadFailed:`Presets laden mislukt. Open eerst Instellingen → Profielen om ze te importeren.`,refreshPresets:`Vernieuwen`,refreshPresetsTitle:`Presets vernieuwen — haal de nieuwste cloud- en meegeleverde lijsten op (gebruik na het verwijderen van een preset in Bambu Studio of Bambu Handy)`,allPresetsRequired:`Alle presets moeten worden geselecteerd`,useEmbedded:`Ingebouwde instellingen van het bestand gebruiken`,useEmbeddedHint:`Slice zoals de ontwerper het heeft ingesteld (wanden, infill, filament) in plaats van met bovenstaande profielen. Beschikbaar omdat je printer overeenkomt met die van het bestand.`,autoOrient:`Objecten automatisch oriënteren`,autoOrientHint:`Laat de slicer elk object eerst naar de beste afdrukzijde draaien. Overschrijft de oriëntatie uit het bestand.`,autoArrange:`Automatisch op de plaat rangschikken`,autoArrangeHint:`Laat de slicer de objecten positioneren zodat ze niet meer overlappen. Vervangt de indeling uit het bestand.`,enqueuing:`Slicetaak indienen…`,queued:`In wachtrij…`,failed:`Slicen mislukt. Controleer de logboeken van de slicer-sidecar.`,startedToast:`{{name}} op de achtergrond slicen…`,queuedToast:`In wachtrij: {{name}} — {{elapsed}}`,runningToast:`{{name}} slicen — {{elapsed}}`,runningWithProgress:`{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,runningWithProgressMultiPlate:`Plaat {{plateIndex}} van {{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,completedToast:`{{name}} gesliced`,externalWriteFallbackToast:`Opgeslagen in de interne bibliotheek: er kon niet naar de externe map worden geschreven`,failedTitle:`Slicen mislukt`,failedToast:`Slicen van {{name}} mislukt: {{detail}}`,tier:{local:`Geïmporteerd`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Standaard`},cloud:{notAuthenticated:`Log in op Bambu Cloud (Instellingen → Profielen → Bambu Cloud) om je cloudpresets te zien.`,expired:`Bambu Cloud-sessie verlopen — log opnieuw in om je cloudpresets te vernieuwen.`,unreachable:`Bambu Cloud is momenteel niet bereikbaar. Lokale en standaardpresets blijven werken.`},orcaCloud:{notAuthenticated:`Log in op Orca Cloud (Profielen → Orca Cloud) om je Orca-presets te zien.`,expired:`Orca Cloud-sessie verlopen — log opnieuw in om je Orca-presets te vernieuwen.`,unreachable:`Orca Cloud is momenteel niet bereikbaar. Andere presets blijven werken.`},bedType:{label:`Bouwplaat`,auto:`Auto (procespreset gebruiken)`,coolPlate:`Cool Plate`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`},pipelines:{label:`Pipeline`,applyAria:`Pipeline toepassen`,applyPrompt:`Pipeline toepassen…`,empty:`Geen opgeslagen pipelines`,saveButton:`Opslaan als pipeline`,saveTitle:`Sla de huidige selectie van vier sleuven op als herbruikbare pipeline`,namePlaceholder:`Pipelinenaam`,nameAria:`Nieuwe pipelinenaam`,toast:{applied:`"{{name}}" toegepast`,saved:`Pipeline opgeslagen`,saveFailed:`Opslaan mislukt`}}},spoolman:{title:`Spoolman-integratie`,enabled:`Spoolman ingeschakeld`,url:`Spoolman-URL`,connected:`Verbonden`,disconnected:`Niet verbonden`,testConnection:`Verbinding testen`,sync:`Synchroniseren`,syncing:`Synchroniseren...`,lastSync:`Laatste synchronisatie`,linkToSpoolman:`Koppelen aan Spoolman`,openInSpoolman:`Openen in Spoolman`,unlinkSpool:`Spoel ontkoppelen`,unlinkConfirmTitle:`Spoeltoewijzing verwijderen?`,unlinkConfirmMessage:`Hiermee wordt de spoel uit deze sleuf verwijderd. De spoelgegevens zelf blijven ongewijzigd.`,selectSpool:`Spoel selecteren`,noUnlinkedSpools:`Geen niet-toegewezen spoelen beschikbaar`,linkSuccess:`Spoel succesvol toegewezen`,linkFailed:`Spoel toewijzen mislukt`,unlinkSuccess:`Spoeltoewijzing succesvol verwijderd`,unlinkFailed:`Spoeltoewijzing verwijderen mislukt`,linkedSpool:`Toegewezen spoel`,spoolId:`Spoel-ID`,fillSourceLabel:`(Spoolman)`,weight:`Gewicht`,remaining:`Resterend`,disableWeightSync:`Synchronisatie van geschat AMS-gewicht uitschakelen`,disableWeightSyncDesc:`Werk de resterende capaciteit niet bij op basis van AMS-schattingen. Gebruik dit als je de verbruikstracking van Spoolman verkiest boven AMS-schattingen op basis van percentages. Nieuwe spoelen gebruiken nog steeds de AMS-schatting als startgewicht.`,reportPartialUsage:`Gedeeltelijk verbruik rapporteren voor mislukte afdrukken`,reportPartialUsageDesc:`Wanneer een afdruk mislukt of wordt geannuleerd, rapporteer dan het geschatte filamentverbruik tot dat moment op basis van de laagvoortgang.`},locations:{title:`Opslaglocaties`,subtitle:`Beheer planken, laden en andere fysieke opslagplekken voor je spoelen`,add:`Locatie toevoegen`,addShort:`Toevoegen`,edit:`Locatie bewerken`,name:`Naam`,spools:`Spoelen`,sensors:`Sensoren`,empty:`Nog geen opslaglocaties. Maak je eerste plank of lade.`,manage:`Locaties`,createPlaceholder:`bijv. Plank A, Lade 1`,nameRequired:`Locatienaam is verplicht`,created:`Locatie gemaakt`,updated:`Locatie bijgewerkt`,deleted:`Locatie verwijderd`,saveFailed:`Locatie opslaan mislukt`,deleteFailed:`Locatie verwijderen mislukt`,deleteBlocked:`Verwijder alle spoelen uit deze locatie voordat je deze verwijdert`,confirmDelete:`"{{name}}" verwijderen?`,confirmDeleteMessage:`Deze locatie wordt uit de catalogus verwijderd. Spoelen moeten eerst worden verplaatst.`,confirmDeleteMessageWithSensors:`Deze locatie wordt uit de catalogus verwijderd. Spoelen moeten eerst worden verplaatst. Gekoppelde sensoren worden ook verwijderd.`},inventory:{title:`Spoelvoorraad`,subtitle:`Beheer je spoelen`,addToInventory:`Aan voorraad toevoegen`,addToInventoryPending:`Toevoegen...`,addToInventorySuccess:`Spoel aan voorraad toegevoegd`,addToInventoryFailed:`Spoel aan voorraad toevoegen mislukt`,unknownSpoolTitle:`Nieuw filament gedetecteerd`,unknownSpoolMessage:`Een spoel met een onbekende RFID-tag is gedetecteerd bij {{location}}. Nu aan je voorraad toevoegen?`,unknownSpoolSlot:`Sleuf`,bulk:{selectAllVisible:`Alle zichtbare selecteren`,selectRow:`Rij selecteren`,selectGroup:`Groep selecteren`,selectionCount:`{{count}} geselecteerd`,edit:`Bewerken`,printLabels:`Labels afdrukken`,resetUsage:`Verbruik resetten`,restore:`Herstellen`,archive:`Archief`,delete:`Verwijderen`,clearSelection:`Selectie wissen`,editTitle:`Spoelen in bulk bewerken`,editSubtitle:`Van toepassing op {{count}} geselecteerde spoelen. Alleen velden die je aanvinkt worden bijgewerkt.`,editHint:`Typ in een veld om het voor bijwerken te markeren — alleen aangevinkte rijen worden verzonden. Een leeg veld laat de spoelen ongewijzigd (velden wissen kan alleen per spoel).`,useCustom:`"{{value}}" gebruiken`,toggleField:`Bijwerken voor dit veld omschakelen`,changeCount:`{{count}} velden worden bijgewerkt.`,applyPending:`Toepassen...`,applyButton:`Toepassen op {{count}} spoelen`,deleteTitle:`Geselecteerde spoelen verwijderen`,archiveTitle:`Geselecteerde spoelen archiveren`,restoreTitle:`Geselecteerde spoelen herstellen`,resetUsageTitle:`Verbruik van geselecteerde spoelen resetten`,deleteMessage:`{{count}} spoelen permanent verwijderen? Dit kan niet ongedaan worden gemaakt.`,archiveMessage:`{{count}} spoelen archiveren? Ze kunnen later worden hersteld.`,restoreMessage:`{{count}} gearchiveerde spoelen herstellen?`,resetUsageMessage:`De teller "Totaal verbruikt" op {{count}} spoelen resetten? Resterend gewicht blijft behouden.`,updateSuccess:`{{count}} spoelen bijgewerkt`,updateFailed:`Bulkupdate mislukt`,updatePartial:`{{ok}} spoelen bijgewerkt, {{failed}} mislukt`,updateAllFailed:`Alle {{count}} spoelupdates zijn mislukt — selectie blijft behouden zodat je opnieuw kunt proberen`,deleteSuccess:`{{count}} spoelen verwijderd`,deleteFailed:`Bulkverwijdering mislukt`,deletePartial:`{{ok}} spoelen verwijderd, {{failed}} mislukt`,deleteAllFailed:`Alle {{count}} spoelverwijderingen zijn mislukt — selectie blijft behouden zodat je opnieuw kunt proberen`,archiveSuccess:`{{count}} spoelen gearchiveerd`,archiveFailed:`Bulkarchivering mislukt`,archivePartial:`{{ok}} spoelen gearchiveerd, {{failed}} mislukt`,archiveAllFailed:`Alle {{count}} spoelarchiveringen zijn mislukt — selectie blijft behouden zodat je opnieuw kunt proberen`,restoreSuccess:`{{count}} spoelen hersteld`,restoreFailed:`Bulkherstel mislukt`,restorePartial:`{{ok}} spoelen hersteld, {{failed}} mislukt`,restoreAllFailed:`Alle {{count}} spoelherstelacties zijn mislukt — selectie blijft behouden zodat je opnieuw kunt proberen`,invalidHex:`Voer 6 hextekens (RRGGBB) of 8 (RRGGBBAA) in. Anders wordt het veld niet toegepast.`},spoolmanMixedContentTitle:`Spoolman kan niet via HTTPS laden — mixed content wordt door je browser geblokkeerd`,spoolmanMixedContentBody:`Bambuddy wordt via HTTPS aangeboden (via je reverse proxy), maar je Spoolman-URL gebruikt nog gewone HTTP. Browsers blokkeren mixed content om veiligheidsredenen, waardoor de ingebedde Spoolman-interface niet kan worden weergegeven. Spoolman moet via HTTPS bereikbaar zijn om dit te laten werken.`,spoolmanMixedContentFixReverseProxy:`Plaats Spoolman achter dezelfde reverse proxy als Bambuddy (Traefik / Nginx / Caddy) met HTTPS en werk daarna de Spoolman-URL in Instellingen bij naar het nieuwe HTTPS-adres.`,spoolmanMixedContentFixOpenNewTab:`Als tijdelijke oplossing kun je Spoolman in een nieuw browsertabblad via HTTP openen — mixed-contentregels gelden alleen voor ingebedde frames, dus een zelfstandig tabblad werkt wel.`,spoolmanOpenInNewTab:`Spoolman in nieuw tabblad openen`,labels:{title:`Spoellabels afdrukken`,selectedCount:`{{count}} geselecteerd`,pickSpools:`Kies voor welke spoelen je labels wilt afdrukken:`,monochrome:`Monochroom (zwart-witprinter)`,monochromeHint:`Verwijdert het kleurvlak en maakt de tekst breder`,startingPosition:`Startpositie van etiket`,startingPositionRange:`Alleen vellensjablonen: L7160 ondersteunt 1–21; 5160 ondersteunt 1–30.`,startingPositionInvalid:`Voer een heel getal van 1 tot {{capacity}} in.`,startingPositionFirst:`Het afdrukken begint op positie 1.`,startingPositionSkipped:`Posities 1 tot en met {{lastPosition}} blijven leeg op het eerste vel.`,startingPositionRangeError:`De startpositie moet voor dit vel tussen 1 en {{capacity}} liggen.`,searchPlaceholder:`Zoek op naam, merk of #ID`,filterByMaterial:`Materiaal:`,allMaterials:`Alle`,selectVisible:`Alle zichtbare selecteren ({{count}})`,deselectVisible:`Zichtbare deselecteren`,clearAll:`Alles wissen`,noSpoolsToShow:`Geen spoelen om te tonen. Pas je filter aan en probeer opnieuw.`,noMatches:`Geen spoelen komen overeen met de huidige zoekopdracht of het filter.`,printOne:`Label voor deze spoel afdrukken`,printLabels:`Labels afdrukken…`,bulkTitle:`Kies spoelen voor labels uit de {{count}} die momenteel worden weergegeven`,noSpoolsTitle:`Geen spoelen om te labelen`,error:`Labels genereren mislukt: {{msg}}`,sortBy:{label:`Sorteren:`,id:`Op ID`,color:`Op kleur`},templates:{amsHolderSmall:{label:`AMS-houder — klein (74 × 33 mm)`,hint:`Eén label per pagina; past bij het printbare label van MakerWorld-model 752566 (AMS Filament Label Holder).`},amsHolderLarge:{label:`AMS-houder — groot (75 × 55 mm)`,hint:`Eén label per pagina; past bij de kartonnen insteekvariant van de AMS Filament Label Holder. Ruim genoeg voor kleurvlak, merk, materiaal, ID en QR-code.`},box40x30:{label:`Dooslabel (40 × 30 mm)`,hint:`Eén label per pagina; veelgebruikt DK/Brother-rolformaat, geschikt voor filamentzakken en opslagbakken.`},box:{label:`Dooslabel (62 × 29 mm)`,hint:`Eén label per pagina; formaat voor kleine labels van Brother PT/QL en Dymo.`},averyL7160:{label:`Avery L7160 — A4-vel (38,1 × 63,5 mm × 21)`,hint:`EU-vellen; 21 labels per A4-pagina.`},avery5160:{label:`Avery 5160 — US Letter-vel (25,4 × 66,7 mm × 30)`,hint:`Amerikaanse vellen; 30 labels per Letter-pagina.`}}},csv:{importButton:`CSV importeren`,exportButton:`CSV exporteren`,modalTitle:`Spoelen importeren uit CSV`,selectFile:`Kies een CSV-bestand of sleep het hierheen`,dragHint:`Koptekst: material (verplicht), brand, subtype, color_name, rgba, …`,parsing:`Bestand lezen…`,previewError:`CSV-bestand kon niet worden gelezen`,validCount:`{{count}} geldig`,errorCount:`{{count}} fout`,skippedCount:`{{count}} overgeslagen`,colRow:`Rij`,colStatus:`Status`,colColor:`Kleur`,colorResolved:`Kleur ingevuld vanuit catalogus`,colorCrossMaterial:`Kleur overgenomen van ander materiaal — geen exacte overeenkomst in catalogus`,duplicateExisting:`Er bestaat al een spoel met dit materiaal, merk en deze kleur — deze wordt toch als nieuwe spoel geïmporteerd`,spoolmanHint:`Gebruik in Spoolman-modus de ingebouwde CSV-import/-export van Spoolman.`,importValidRows:`{{count}} geldige rijen importeren`,noValidRows:`Geen geldige rijen`,importing:`Importeren…`,importSuccess:`{{count}} spoelen geïmporteerd`,importError:`Importeren mislukt`,exportError:`Export mislukt`},addSpool:`Spoel toevoegen`,editSpool:`Spoel bewerken`,copySpool:`Spoel kopiëren`,material:`Materiaal`,selectMaterial:`Materiaal selecteren...`,subtype:`Subtype`,brand:`Merk`,searchBrand:`Merk zoeken...`,useCustomBrand:`"{{brand}}" gebruiken`,useCustomMaterial:`Aangepast materiaal gebruiken: {{material}}`,suggestedOptions:`Voorgesteld`,allOptions:`Alle`,colorName:`Kleurnaam`,colorNamePlaceholder:`Jade White, Fire Red...`,color:`Kleur`,hexColor:`Hexkleur`,pickColor:`Aangepaste kleur kiezen`,labelWeight:`Labelgewicht`,coreWeight:`Leeg spoelgewicht`,searchSpoolWeight:`Spoelgewicht zoeken...`,weightUsed:`Gebruikt`,currentWeight:`Resterend gewicht`,measuredWeight:`Gemeten gewicht`,spoolName:`Spoel`,costPerKg:`Kosten per kg`,storageLocation:`Opslaglocatie`,temperature:`Temperatuur`,humidity:`Luchtvochtigheid`,battery:`Batterij`,storageLocationPlaceholder:`bijv. Plank A, Lade 1`,openInInventory:`Openen in Voorraad`,measuredWeightError:`Gemeten gewicht moet tussen {{min}}g en {{max}}g liggen.`,slicerFilament:`Slicerfilament`,slicerFilamentName:`Naam slicerpreset`,slicerPreset:`Slicer-preset`,searchPresets:`Filamentpresets zoeken...`,selectedPreset:`Geselecteerd`,noPresetsFound:`Geen presets gevonden`,tempOverrides:`Temperatuuroverschrijvingen`,note:`Notitie`,notePlaceholder:`Eventuele extra notities over deze spoel...`,category:`Categorie`,categoryPlaceholder:`bijv. Productie, Prototype, Klant A`,categoryNone:`Niet gecategoriseerd`,storageLocationNone:`Geen locatie ingesteld`,lowStockThresholdOverride:`Drempel lage voorraad (deze spoel)`,lowStockThresholdOverrideHelp:`Laat leeg om de globale drempel ({{global}}%) te gebruiken.`,clearRfid:`RFID-tag wissen`,rfidCleared:`RFID-tag gewist`,archive:`Archief`,restore:`Herstellen`,noSpools:`Nog geen spoelen. Voeg je eerste spoel toe om te beginnen.`,noAvailableSpools:`Geen spoelen beschikbaar. Voeg eerst een spoel toe aan je voorraad of maak de toewijzing van een andere sleuf ongedaan.`,kProfiles:`K-profielen`,addKProfile:`K-profiel toevoegen`,assignSpool:`Spoel toewijzen`,unassignSpool:`Toewijzing opheffen`,assignSuccess:`Spoel toegewezen en AMS-sleuf geconfigureerd`,assignPendingInsert:`Toegewezen. Sleuf wordt geconfigureerd zodra je de spoel plaatst.`,assignFailed:`Spoel toewijzen mislukt`,selectSpool:`Selecteer een spoel om aan deze sleuf toe te wijzen`,assigned:`Toegewezen`,assigning:`Toewijzen...`,searchSpools:`Spoelen zoeken...`,showAllSpools:`Alle spoelen tonen`,spoolmanSpools:`Spoolman-spoelen`,allMaterials:`Alle materialen`,filterByBrand:`Filteren op merk...`,showArchived:`Gearchiveerde tonen`,quickAdd:`Snel toevoegen (voorraad)`,quantity:`Aantal`,stock:`Voorraad`,configured:`Geconfigureerd`,spoolsCreated:`{{count}} spoelen gemaakt`,spoolsPartiallyCreated:`{{created}} van {{total}} spoelen gemaakt (sommige mislukt)`,spoolCreated:`Spoel gemaakt`,spoolUpdated:`Spoel bijgewerkt`,spoolDeleted:`Spoel verwijderd`,deepLinkSpoolNotFound:`Spoel niet gevonden`,deepLinkFetchFailed:`Spoel kon niet worden geladen — probeer opnieuw`,spoolArchived:`Spoel gearchiveerd`,spoolRestored:`Spoel hersteld`,kProfileSaveFailed:`K-profielinstellingen konden niet worden opgeslagen`,syncWeightSpoolNotFound:`Spoel niet gevonden — mogelijk verwijderd`,syncWeightSpoolmanUnreachable:`Spoolman is niet bereikbaar — probeer het later opnieuw`,syncWeightFailed:`Gewicht synchroniseren mislukt`,spoolmanUnreachable:`Spoolman is niet bereikbaar — probeer het later opnieuw`,deleteSpoolNotFound:`Spoel niet gevonden — mogelijk al verwijderd`,deleteFailed:`Spoel verwijderen mislukt`,archiveSpoolNotFound:`Spoel niet gevonden — mogelijk al verwijderd`,archiveFailed:`Spoel archiveren mislukt`,restoreSpoolNotFound:`Spoel niet gevonden — mogelijk al verwijderd`,restoreFailed:`Spoel herstellen mislukt`,saveFailed:`Wijzigingen opslaan mislukt`,tagClearFailed:`Tag wissen mislukt`,deleteConfirm:`Weet je zeker dat je deze spoel wilt verwijderen? Dit kan niet ongedaan worden gemaakt.`,archiveConfirm:`Weet je zeker dat je deze spoel wilt archiveren?`,advancedSettings:`Geavanceerde instellingen`,filamentInfoTab:`Filamentinformatie`,paProfileTab:`PA-profiel`,colorAndCostTab:`Kleur & kosten`,printersTab:`Printers`,filamentInfo:`Filament`,additional:`Aanvullend`,loadingPresets:`Cloudpresets laden...`,cloudConnected:`Cloud verbonden`,cloudNotConnected:`Cloud niet verbonden (standaardwaarden worden gebruikt)`,recentColors:`Recent`,searchColors:`Kleuren zoeken...`,searchResults:`Zoekresultaten`,allColors:`Alle kleuren`,commonColors:`Veelgebruikte kleuren`,showLess:`Minder tonen`,showAll:`Alles tonen`,noColorsFound:`Geen kleuren komen overeen met je zoekopdracht`,noResults:`Geen overeenkomsten gevonden`,extraColorsLabel:`Extra kleuren`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Plak 2 tot 8 hexwaarden, gescheiden door komma's. Wordt als verloop weergegeven.`,extraColorsInvalid:`Ongeldige hex genegeerd: {{tokens}}`,colorEffectLabel:`Effect`,colorEffect:{none:`Geen`,sparkle:`Sprankelend`,wood:`Hout`,marble:`Marmer`,glow:`Gloed`,matte:`Mat`,silk:`Zijde`,galaxy:`Galaxy`,rainbow:`Regenboog`,metal:`Metaal`,translucent:`Transparant`,gradient:`Verloop`,dualColor:`Tweekleurig`,triColor:`Driekleurig`,multicolor:`Meerkleurig`},selectMaterialFirst:`Selecteer eerst een materiaal op het tabblad Filamentinformatie.`,noPrintersConfigured:`Geen printers geconfigureerd. Voeg printers toe om PA-profielen te gebruiken.`,matchingFilter:`Overeenkomend`,anyBrand:`Elk merk`,anyVariant:`Elke variant`,autoSelect:`Automatisch selecteren`,matches:`overeenkomsten`,match:`overeenkomst`,noMatches:`Geen overeenkomsten`,connected:`Verbonden`,offline:`Offline`,printerOffline:`Printer is offline. Maak verbinding om kalibratieprofielen te bekijken.`,noKProfilesMatch:`Geen K-profielen komen overeen met het geselecteerde filament.`,leftNozzle:`Linker nozzle`,rightNozzle:`Rechter nozzle`,profilesSelected:`kalibratieprofiel(en) geselecteerd`,filamentPreset:`Filamentvoorinstelling`,presetUseSpoolDefault:`Voorinstelling van de spoel gebruiken`,presetInherited:`overgenomen`,presetOverride:`aangepast`,presetNeedsModel:`Deze printer heeft zijn model nog niet doorgegeven en kan dus geen eigen voorinstelling hebben.`,autoMatchPresets:`Automatisch koppelen`,autoMatchPresetsHint:`Zoek de variant van de spoelvoorinstelling die elk model noemt`,kProfilesPerPrinter:`K-profielen`,kProfileNotSet:`Niet ingesteld`,kProfileFlowMismatch:`Dit profiel is gemeten met een {{profile}}-nozzle, maar er is een {{fitted}}-nozzle gemonteerd; het wordt dus niet toegepast`,nozzle:`Nozzle`,unknownModel:`Onbekend model`,onePrinter:`1 printer`,nPrinters:`{{n}} printers`,filamentPresetsLoadFailed:`De voorinstellingen per model van deze spoel konden niet worden geladen`,filamentPresetSaveFailed:`De voorinstellingen per model konden niet worden opgeslagen`,totalInventory:`Totale voorraad`,totalConsumed:`Totaal verbruikt`,byMaterial:`Per materiaal`,inPrinter:`In printer`,lowStock:`Lage voorraad`,sinceTracking:`Sinds tracking is gestart`,resetConsumedCounter:`Teller resetten`,resetConsumedCounterTooltip:`Zet de teller voor verbruikte grammen van deze spoel op nul. Resterend gewicht verandert niet.`,resetConsumedCounterConfirm:`Teller voor verbruikte grammen van deze spoel resetten naar 0? Toekomstige afdrukken tellen dan weer vanaf nul. De spoel zelf, de berekening van resterend gewicht en je instellingen veranderen niet.`,resetAllConsumedCounters:`Alle tellers resetten`,resetAllConsumedCountersTooltip:`Zet de teller voor verbruikte grammen op elke spoel op nul. Resterende gewichten veranderen niet.`,resetAllConsumedCountersConfirm:`De teller voor verbruikte grammen op alle {{count}} spoelen (inclusief gearchiveerde) resetten naar 0? Hiermee wordt de statistiek "Totaal verbruikt" gewist zodat toekomstige afdrukken weer vanaf nul tellen. Spoelen en resterende gewichten veranderen niet.`,consumedCounterReset:`Teller gereset`,allConsumedCountersReset:`Teller gereset voor {{count}} spoel(en)`,resetConsumedCounterFailed:`Teller resetten mislukt`,loadedInAms:`Geladen in AMS/Ext`,remaining:`Resterend`,weightCheck:`Gewichtscontrole`,lastWeighed:`Laatst gewogen`,neverWeighed:`Nooit gewogen`,search:`Spoelen zoeken...`,showing:`Weergegeven`,to:`tot`,of:`van`,show:`Tonen`,spools:`spoelen`,spool:`spoel`,page:`Pagina`,noSpoolsMatch:`Geen resultaten gevonden`,noSpoolsMatchDesc:`Pas je zoekopdracht of filters aan om te vinden wat je zoekt.`,active:`Actief`,archived:`Gearchiveerd`,all:`Alle`,used:`Gebruikt`,new:`Nieuw`,clearFilters:`Filters wissen`,table:`Tabel`,cards:`Kaarten`,net:`Netto`,groupSimilar:`Groeperen`,groupedSpools:`{{count}} identieke spoelen`,groupedRows:`rijen`,columns:`Kolommen`,configureColumns:`Kolommen configureren`,configureColumnsDesc:`Sleep om kolommen te herschikken of gebruik de pijlen. Schakel zichtbaarheid met het oogpictogram.`,visible:`zichtbaar`,reset:`Resetten`,cancel:`Annuleren`,applyChanges:`Wijzigingen toepassen`,moveUp:`Omhoog verplaatsen`,moveDown:`Omlaag verplaatsen`,hideColumn:`Kolom verbergen`,showColumn:`Kolom tonen`,linkToSpool:`Koppelen aan spoel`,tagLinked:`Tag aan spoel gekoppeld`,tagLinkFailed:`Tag koppelen mislukt`,tagAlreadyLinked:`Tag is al aan spoel #{{id}} gekoppeld`,unknownTag:`Onbekende RFID-tag gedetecteerd`,usageHistory:`Verbruiksgeschiedenis`,noUsageHistory:`Nog geen verbruik geregistreerd`,printName:`Afdruknaam`,weightConsumed:`Verbruikt gewicht`,clearHistory:`Wissen`,historyCleared:`Verbruiksgeschiedenis gewist`,fillSourceLabel:`(Voorraad)`,lowStockThresholdError:`Drempel moet tussen 0,1 en 99,9 liggen`,assignMismatchTitle:`Materiaal komt niet overeen`,assignMismatchMessage:`Het materiaal van de geselecteerde spoel "{{spoolMaterial}}" komt niet overeen met het materiaal van de tray "{{trayMaterial}}" voor {{location}}. Toch toewijzen?`,assignMismatchConfirm:`Toch toewijzen`,assignPartialMismatchMessage:`Het spoelmateriaal "{{spoolMaterial}}" lijkt op maar komt niet exact overeen met "{{trayMaterial}}" in {{location}}. Wil je doorgaan?`,assignProfileMismatchMessage:`Het spoelprofiel "{{spoolProfile}}" komt niet overeen met het trayprofiel "{{trayProfile}}" in {{location}}. Wil je doorgaan?`,assignReconfigureNote:`De AMS-sleuf wordt opnieuw geconfigureerd om het profiel van de spoel te gebruiken.`,spoolmanFilamentCatalog:`Spoolman-filamentcatalogus`,pickFromSpoolmanCatalog:`Kies uit Spoolman-catalogus…`,spoolmanFilamentSelected:`Filament geselecteerd uit Spoolman-catalogus`,spoolmanFilamentUnlinked:`Koppeling met filamentcatalogus gewist`,noSpoolmanFilaments:`Geen filamenten gevonden in Spoolman-catalogus`,spoolmanFilamentColorSwatch:`Filamentkleur`,spoolWeightManagedBySpoolman:`Leeg spoelgewicht wordt per filamenttype beheerd in Spoolman`,spoolmanCatalogLoadFailed:`Spoolman-filamentcatalogus laden mislukt`},timelapse:{title:`Timelapse`,create:`Timelapse maken`,download:`Downloaden`,delete:`Verwijderen`,preview:`Voorbeeld`,frameRate:`Framesnelheid`,quality:`Kwaliteit`,processing:`Verwerken...`,noTimelapses:`Geen timelapses beschikbaar`},ams:{title:`AMS`,slot:`Sleuf`,empty:`Leeg`,emptySlot:`Lege sleuf`,slotEmpty:`Leeg`,slotUnconfigured:`?`,emptySlotReset:`Geen filament toegewezen`,unknown:`Onbekend`,humidity:`Luchtvochtigheid`,temperature:`Temperatuur`,filamentType:`Filamenttype`,filamentColor:`Kleur`,remaining:`Resterend`,history:`AMS-geschiedenis`,noHistory:`Geen geschiedenis beschikbaar`,configureSlot:`Sleuf configureren`,externalSpool:`Externe spoel`,profile:`Profiel`,kFactor:`K-factor`,kFactorShort:`K`,fill:`Vullen`,configure:`Configureren`,used:`gebruikt`,remainingUnit:`resterend`},printModal:{variants:{editNote:`Deze alternatieven zijn ingesteld toen de taak in de wachtrij werd geplaatst. Annuleer en plaats opnieuw in de wachtrij om ze te wijzigen.`,title:`Printeralternatieven`,help:`Eén taak, één wachtrijpositie. De eerste passende printer die vrijkomt voert zijn bestand uit.`,unknownModel:`Onbekend model`,plateFor:`Plaat voor {{filename}}`,moveUp:`Omhoog verplaatsen`,moveDown:`Omlaag verplaatsen`,queued:`In wachtrij met {{count}} alternatieven`},selectPrinter:`Printer selecteren`,selectPlate:`Plaat selecteren`,filamentMapping:`Filamenttoewijzing`,useArchiveMapping:`Toewijzing`,useArchiveMappingTooltip:`Selecteer elke sleuf uit de AMS-toewijzing die met dit archief is opgeslagen (vanuit de slicer), in plaats van te matchen op type/kleur.`,clickToChangeSlot:`Klik om sleuftoewijzing te wijzigen`,reRead:`Opnieuw uitlezen`,plateN:`Plaat {{n}}`,plateFilamentsUnreadable:`De filamenten van een geselecteerde plaat konden niet worden gelezen en kunnen daarom niet worden toegewezen. Deselecteer deze plaat om de andere in de wachtrij te plaatsen.`,totalCost:`Totale kosten:`,slotRemainingShort:` - {{grams}}g resterend`,printSettings:`Afdrukinstellingen`,bedLeveling:`Bednivellering`,flowCalibration:`Flowkalibratie`,vibrationCalibration:`Trillingskalibratie`,layerInspection:`Inspectie eerste laag`,timelapse:`Timelapse`,cancel:`Annuleren`,noPrintersAvailable:`Geen printers beschikbaar`,printerBusy:`Printer is bezig`,printerOffline:`Printer is offline`,sameTypeDifferentColor:`Zelfde type, andere kleur`,filamentTypeNotLoaded:`Filamenttype niet geladen`,statusReady:`Gereed`,statusColorMismatch:`Kleur komt niet overeen`,statusTypeNotFound:`Type niet gevonden`,requiredTooltip:`Vereist: {{name}} - {{color}}`,manuallySelected:`Handmatig geselecteerd`,autoMatched:`Automatisch gekoppeld`,selectSlot:`Sleuf selecteren`,exactColorMatch:`Exacte kleurovereenkomst`,slotForFilament:`Printersleuf voor {{name}}`,overrideForFilament:`Filament overschrijven voor {{name}}`,sameTypeDifferentColorDetail:`Zelfde type, andere kleur: vereist {{required}}, sleuf bevat {{loaded}}`,requiredTypeNotInPrinter:`Vereist filamenttype niet gevonden in printer.`,whenToPrint:`Wanneer afdrukken`,asap:`Zo snel mogelijk`,queue:`Wachtrij`,schedule:`Plannen`,dateTime:`Datum en tijd`,invalidDateTime:`Voer een geldige datum en tijd in`,openCalendar:`Kalender openen`,requireManualStart:`Handmatige start vereisen`,requirePreviousSuccess:`Alleen starten als vorige afdruk is geslaagd`,autoOffAfter:`Printer uitschakelen wanneer klaar`,helpAsap:`Afdruk wordt bovenaan de wachtrij geplaatst en start zodra een geschikte printer inactief is.`,helpSchedule:`Afdruk start op het geplande tijdstip als de printer inactief is. Als deze bezig is, wacht de taak tot de printer beschikbaar is.`,helpQueue:`Afdruk wordt achteraan de wachtrij geplaatst.`,leftNozzle:`L`,rightNozzle:`R`,leftNozzleTooltip:`Linker nozzle`,rightNozzleTooltip:`Rechter nozzle`,ftsSameInletHint:`Alle filamenten voor deze afdruk zitten op Filament Track Switch IN-{{inlet}}. Wisselen tussen filamenten op dezelfde ingang is langzamer — verplaats er één naar een AMS op de andere ingang om dit te versnellen.`,rackPosition:`Rekpositie`,rackPositionTooltip:`Welke nozzle op het rek dit filament afdrukt. Posities zijn genummerd zoals op de printer.`,rackEmptyPosition:`Deze rekpositie is leeg`,rackWrongNozzle:`Bevat een {{has}}-nozzle; dit filament vereist {{needs}}`,filamentOverride:`Filament overschrijven`,filamentOverrideHint:`Overschrijf filamenten optioneel voor modelgebaseerde toewijzing. De scheduler matcht op je geselecteerde filamenten in plaats van de oorspronkelijke 3MF-waarden.`,originalFilament:`Origineel`,overrideWith:`Overschrijven met`,resetToOriginal:`Terugzetten naar origineel`,insufficientFilamentTitle:`Niet genoeg filament`,waitingForAmsStatus:`Wachten op AMS-status van {{printer}}…`,insufficientFilamentMessage:`Sommige toegewezen spoelen bevatten minder filament dan deze afdruk nodig heeft:`,insufficientFilamentLine:`{{printer}} - {{slot}}: vereist {{required}}g, {{remaining}}g resterend`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: vereist {{required}}g, {{remaining}}g beschikbaar over overeenkomende spoelen (AMS Filament Backup)`,printAnyway:`Toch afdrukken`,forceColorMatch:`Kleurmatch afdwingen`,staggerPrinterStarts:`Printerstarts spreiden`,staggerGroupSize:`Groepsgrootte`,staggerInterval:`Interval (min)`,staggerPreview:`{{printers}} printers → {{groups}} groepen van {{size}}, starten elke {{interval}} min`,staggerLastGroup:`laatste groep: {{count}}`,staggerTotal:`totaal: {{minutes}} min`,staggerToPrinters:`Spreiden over {{count}} printers`,gcodeInjection:`Auto-print-G-code injecteren`,insufficientBudget:`Onvoldoende budget`,unlimitedNoBudget:`Onbeperkt – er is geen budgetlimiet ingesteld.`,noPrintableCostCenters:`Er is geen actieve kostenplaats beschikbaar voor afdrukken. Vraag een beheerder om je afdruktoegang te geven.`},backup:{includesEncryptionKey:`Lokale back-ups bevatten het MFA-versleutelingssleutelbestand (DATA_DIR/.mfa_encryption_key), zodat een back-up-ZIP op zichzelf compleet is. Behandel de ZIP als gevoelig — iedereen met het bestand kan de opgeslagen OIDC-clientgeheimen en TOTP-geheimen ontsleutelen.`,title:`Back-up en herstel`,createBackup:`Back-up maken`,restoreBackup:`Back-up herstellen`,restoreDescription:`Alle gegevens vervangen vanuit een back-upbestand`,downloadBackup:`Back-up downloaden`,uploadBackup:`Back-up uploaden`,lastBackup:`Laatste back-up`,autoBackup:`Automatische back-up`,backupNow:`Nu back-up maken`,restoreWarning:`Waarschuwing: het herstellen van een back-up overschrijft alle huidige gegevens.`,includeArchives:`Archieven opnemen`,includeSettings:`Instellingen opnemen`,includeProfiles:`Profielen opnemen`,backupSuccess:`Back-up succesvol gemaakt`,restoreSuccess:`Back-up succesvol hersteld`,backupFailed:`Back-up mislukt`,restoreFailed:`Herstellen mislukt`,restoreNote:`Virtuele printer wordt tijdens het herstellen gestopt`,githubBackup:`Git-back-up`,enabled:`Ingeschakeld`,cloudLoginRequired:`Bambu Cloud-login vereist. Log in onder Profielen → Cloudprofielen om GitHub-back-up in te schakelen.`,cloudLoginRequiredShort:`Cloudlogin vereist`,githubDescription:`Synchroniseer je profielen automatisch met een privé-GitHub-repository voor back-up en versiegeschiedenis.`,repoIsPrivate:`Repository is privé — veilig voor back-up.`,repoIsPublicWarning:`Repository is OPENBAAR. Bambuddy-back-ups bevatten MQTT-inloggegevens, Home Assistant-tokens, Prometheus-tokens, je Bambu Cloud-e-mailadres en printertoegangscodes via K-profielen. Opslaan is geblokkeerd totdat je de repository privé maakt in de instellingen van je provider.`,repoVisibilityUnknown:`De zichtbaarheid van de repository kon niet worden bepaald. Bambuddy weigert een back-up naar iets dat niet als privé is bevestigd; opslaan wordt geblokkeerd.`,repositoryUrl:`Repository-URL`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Onveilige HTTP toestaan`,allowInsecureHttpHint:`Inschakelen voor zelfgehoste instanties op privénetwerken zonder TLS`,personalAccessToken:`Personal Access Token`,tokenSaved:`(opgeslagen)`,enterNewToken:`Voer nieuw token in om bij te werken`,tokenHintGitHub:`Fine-grained token met lees- en schrijftoegang tot Contents, of een klassiek token met de repo-scope.`,tokenHintGitLab:`Token met de api-scope, of read_repository en write_repository samen.`,tokenHintGitea:`Token met de write:repository-scope.`,tokenHintForgejo:`Token met de write:repository-scope. Een token beperkt tot alleen deze repository is voldoende.`,branch:`Branch`,provider:`Git-provider`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Alleen handmatig`,hourly:`Elk uur`,daily:`Dagelijks`,weekly:`Wekelijks`,includeInBackup:`Opnemen in back-up`,kProfiles:`K-profielen`,kProfilesDescription:`Pressure-advance-kalibratie van verbonden printers`,noPrintersConnected:`Geen printers verbonden`,printersConnected:`{{connected}}/{{total}} verbonden`,cloudProfiles:`Cloudprofielen`,cloudProfilesDescription:`Filament-, printer- en procespresets uit Bambu Cloud en Orca Cloud`,cloudProfilesAccounts:`Verbonden accounts — Bambu Cloud: {{bambu}}, Orca Cloud: {{orca}}`,appSettings:`App-instellingen`,appSettingsDescription:`Bambuddy-configuratie (volledige database)`,spoolInventory:`Spoelvoorraad`,spoolInventoryDescription:`Filamentspoelen, verbruiksgeschiedenis en kostentracking`,printArchives:`Afdrukarchieven`,printArchivesDescription:`Metadata van afdrukgeschiedenis (geen gcode/3MF-bestanden)`,lastBackupAt:`Laatste back-up:`,noBackupsYet:`Nog geen back-ups`,next:`Volgende:`,startingBackup:`Back-up starten...`,test:`Testen`,enableBackup:`Back-up inschakelen`,testConnection:`Verbinding testen`,enterRepoUrl:`Voer repository-URL in`,enterRepoAndToken:`Voer repository-URL en toegangstoken in`,repoRequired:`Repository-URL is verplicht`,tokenRequired:`Toegangstoken is verplicht`,githubBackupEnabled:`GitHub-back-up ingeschakeld`,tokenUpdated:`Token bijgewerkt`,settingsSaved:`Instellingen opgeslagen`,failedToSave:`Opslaan mislukt: {{message}}`,backupCompleteFiles:`Back-up voltooid - {{count}} bestanden bijgewerkt`,backupSkippedNoChanges:`Back-up overgeslagen - geen wijzigingen`,backupFailed2:`Back-up mislukt: {{message}}`,clearedLogs:`{{count}} logboeken gewist`,failedToClearLogs:`Logboeken wissen mislukt: {{message}}`,restoreFromGit:{button:`Herstellen vanuit Git`,title:`Herstellen vanuit Git-back-up`,subtitle:`Kies een commit en wat je wilt herstellen`,commitLabel:`Back-upcommit`,latestCommit:`Nieuwste back-up (top van branch)`,categoriesLabel:`Wat herstellen`,inspecting:`Inhoud van back-up lezen...`,itemCount:`{{count}} in back-up`,overwriteLabel:`Bestaande items overschrijven`,overwriteOn:`Bestaande items worden bijgewerkt vanuit de back-up.`,overwriteOff:`Alleen ontbrekende items worden toegevoegd; bestaande blijven ongewijzigd.`,selectedCount:`{{count}} geselecteerd`,restoring:`Herstellen...`,confirmTitle:`Herstellen vanuit back-up?`,confirmMessage:`De geselecteerde categorieën worden uit deze commit hersteld. Ontbrekende items worden toegevoegd; bestaande blijven zoals ze zijn.`,confirmMessageOverwrite:`De geselecteerde categorieën worden uit deze commit hersteld en bestaande lokale items worden overschreven. Dit kan niet ongedaan worden gemaakt.`,kprofilesOverwriteCaveat:`K-profielen zijn de uitzondering: het schrijven van een sleuf vervangt altijd de kalibratie op de printer.`,tally:`{{restored}} hersteld, {{skipped}} overgeslagen, {{failed}} mislukt`,reloadHint:`Herlaad Bambuddy zodat de herstelde gegevens overal verschijnen.`,partialHint:`De hierboven vermelde categorieën zijn voltooid en staan op schijf. Ontbrekende categorieën zijn niet uitgevoerd.`,failed:`Herstellen mislukt.`,loadFailed:`Back-uprepository kon niet worden gelezen.`,details:{notPresent:`Niet aanwezig in deze back-upcommit`,unreadableJson:`Onleesbare JSON: {{paths}}`,settingsNoPayload:`Geen instellingen in payload`,settingsCredentialsWillSkip:`{{count}} sleutel(s) die op inloggegevens lijken worden overgeslagen`,settingsCompanionWillSkip:`{{count}} sleutel(s) die op inloggegevens lijken worden overgeslagen, en {{companion}} schakelaar(s) die daarvan afhankelijk zijn blijven uitgeschakeld`,settingsCompanionOnlyWillSkip:`{{companion}} schakelaar(s) blijven uitgeschakeld - de benodigde inloggegevens kunnen niet uit een back-up worden hersteld`,spoolsUsageCount:`inclusief {{count}} verbruiksrecord(s)`,archivesMetadataOnly:`Alleen metadata - 3MF-bestanden en miniaturen zitten niet in een Git-back-up`,kprofilesPrinterCount:`over {{count}} printer(s)`},notes:{noData:`Geen gegevens van dit type in deze back-up`,archivesPrinterMissing:`Sommige archieven verwezen naar printers die niet meer bestaan - koppeling gewist`,archivesProjectMissing:`Sommige archieven verwezen naar projecten die niet meer bestaan - koppeling gewist`,archivesOwnerCleared:`Sommige archieven verwezen naar gebruikers die niet meer bestaan - eigenaar gewist, waardoor ze alleen zichtbaar zijn voor gebruikers met de machtiging archives:read_all totdat een beheerder ze opnieuw toewijst`,archivesOwnerUnmatched:`Sommige archieven noemen een eigenaar die deze instantie niet heeft - eigenaar gewist in plaats van te gokken op basis van het gebruikers-ID uit de back-up, waardoor ze alleen zichtbaar zijn voor gebruikers met de machtiging archives:read_all totdat een beheerder ze opnieuw toewijst`,archivesOwnerUnknown:`Sommige archieven zijn zonder eigenaar hersteld - deze back-up registreert er geen, waardoor ze alleen zichtbaar zijn voor gebruikers met de machtiging archives:read_all totdat een beheerder ze opnieuw toewijst`,archivesUndeleted:`Archief/archieven die sinds de back-up waren verwijderd zijn weer zichtbaar - overschrijven stond aan`,archivesMetadataOnly:`Herstelde archieven bevatten alleen metadata - de 3MF- en miniatuurbestanden zitten niet in een Git-back-up`,spoolUsageUnresolved:`{{count}} verbruiksrecord(s) overgeslagen - hun spoel staat niet in de spoellijst van deze back-up, dus er is niets om ze aan te koppelen.`,spoolUsageUnlinked:`{{count}} verbruiksrecord(s) hersteld zonder koppeling met afdrukgeschiedenis - selecteer Afdrukarchieven samen met Spoelvoorraad om deze te behouden.`,spoolTagKept:`{{count}} spoeltag(s) gelaten zoals ze zijn - de back-up zou een tag hebben gewist die sindsdien is gescand, of een tag naar een tweede spoel hebben verplaatst.`,settingsCredentialsSkipped:`{{count}} sleutel(s) die op inloggegevens lijken overgeslagen - voer geheimen handmatig opnieuw in`,settingsAuthSkipped:`{{count}} authenticatie-instelling(en) overgeslagen - wijzig deze onder Instellingen > Authenticatie zodat vergrendelingscontroles blijven werken`,settingsCompanionSkipped:`{{keys}} blijven uitgeschakeld - de benodigde inloggegevens kunnen niet uit een back-up worden hersteld en deze instantie heeft er geen opgeslagen, dus inschakelen zou de integratie zonder authenticatie achterlaten`,settingsMqttRelayFailed:`MQTT-instellingen hersteld, maar de relay kon niet opnieuw verbinden - start Bambuddy opnieuw`,kprofilesAlwaysOverwrite:`K-profielen overschrijven altijd de overeenkomende sleuf op de printer`,kprofilesAckUnreliable:`Een printer die niet antwoordt telt nog steeds als hersteld - controleer de profielen op de printer`,kprofilesPrinterMissing:`Geen printer met serienummer {{serial}} - overgeslagen`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) is niet verbonden - overgeslagen`,kprofilesUnknownNozzle:`Onverwachte nozzlediameter {{nozzle}} voor {{serial}} - ongewijzigd verzonden`,kprofilesUnmatched:`{{count}} profiel(en) voor {{nozzle}} hadden geen tegenhanger op {{printer}} - als nieuwe profielen toegevoegd`,kprofilesSendFailed:`Verzenden van {{nozzle}}-profielen naar {{printer}} ({{serial}}) mislukt`,kprofilesRefused:`{{printer}} ({{serial}}) weigerde de {{nozzle}}-profielen: {{reason}}`,kprofilesStepFailed:`De K-profielstap kon niet worden voltooid - {{reason}}. Alles wat daarvoor is hersteld blijft opgeslagen.`}},history:`Geschiedenis`,clear:`Wissen`,date:`Datum`,status:`Status`,trigger:`Type`,triggers:{manual:`Back-up (handmatig)`,scheduled:`Back-up (gepland)`,restore:`Herstellen`},commit:`Commit`,localBackup:`Lokale back-up`,localBackupDescription:`Maak een volledige back-up van je Bambuddy-gegevens inclusief database, archieven, uploads en alle bestanden.`,downloadBackupLabel:`Back-up downloaden`,completeBackupZip:`Volledige back-up: database + alle bestanden (ZIP)`,download:`Downloaden`,preparingBackup:`Back-up voorbereiden...`,creatingArchive:`Back-uparchief maken... Dit kan even duren bij grote archieven.`,downloadingFile:`Back-upbestand downloaden...`,backupDownloaded:`Back-up succesvol gedownload`,failedToCreateBackup:`Back-up maken mislukt: {{message}}`,restore:`Herstellen`,restoreReplacesAll:`Herstellen vervangt alle gegevens.`,restoreReplacesAllDetail:`Je huidige database en bestanden worden volledig vervangen. Na herstel is een herstart vereist.`,restoreConfirmTitle:`Back-up herstellen`,restoreConfirmMessage:`Weet je zeker dat je wilt herstellen vanuit "{{filename}}"? Hiermee worden je huidige database en alle bestanden volledig vervangen. De applicatie moet daarna opnieuw worden gestart.`,restoreConfirmButton:`Back-up herstellen`,uploadingFile:`Back-upbestand uploaden...`,backupRestoredRestart:`Back-up hersteld. Start Bambuddy opnieuw.`,failedToRestore:`Back-up herstellen mislukt. Controleer het bestandsformaat.`,reloadNow:`Nu herladen`,creatingBackup:`Back-up maken`,restoringBackup:`Back-up herstellen`,preparing:`Voorbereiden...`,processing:`Verwerken...`,doNotClosePage:`Sluit deze pagina niet en navigeer niet weg. Deze bewerking kan bij grote back-ups enkele minuten duren.`,restoring:`Herstellen...`,restoreComplete:`Herstel voltooid`,restoreFailed2:`Herstel mislukt`,importSettings:`Instellingen importeren uit een back-upbestand`,pleaseWaitRestoring:`Wacht terwijl je gegevens worden hersteld`,selectBackupFile:`Klik om een back-upbestand te selecteren (.json of .zip)`,duplicateHandling:`Zo werkt afhandeling van duplicaten:`,matchPrinters:`Printers`,matchPrintersBy:`gekoppeld op serienummer`,matchSmartPlugs:`Slimme stekkers`,matchSmartPlugsBy:`gekoppeld op IP-adres`,matchNotificationProviders:`Meldingsproviders`,matchNotificationProvidersBy:`gekoppeld op naam`,matchFilaments:`Filamenten`,matchFilamentsBy:`gekoppeld op naam + type + merk`,matchArchives:`Archieven`,matchArchivesBy:`gekoppeld op inhoudshash (altijd overgeslagen)`,matchPendingUploads:`Openstaande uploads`,matchPendingUploadsBy:`gekoppeld op bestandsnaam`,matchSettingsTemplates:`Instellingen en sjablonen`,matchSettingsTemplatesBy:`altijd overschreven`,replaceExisting:`Bestaande gegevens vervangen`,keepExisting:`Bestaande gegevens behouden`,overwriteDescription:`Items die al bestaan overschrijven met gegevens uit de back-up`,keepDescription:`Alleen items herstellen die nog niet bestaan`,overwriteCaution:`Let op:`,overwriteWarning:`Overschrijven vervangt je huidige configuraties met gegevens uit de back-up. Printertoegangscodes worden om veiligheidsredenen nooit overschreven.`,cancel:`Annuleren`,processingBackup:`Back-upbestand verwerken...`,itemsRestored:`Items hersteld`,itemsSkipped:`Items overgeslagen`,restored:`Hersteld`,skippedAlreadyExist:`Overgeslagen (bestaan al)`,filesCategory:`Bestanden (3MF, miniaturen, enz.)`,andMore:`...en {{count}} meer`,newApiKeysGenerated:`Nieuwe API-sleutels gegenereerd`,keysShownOnce:`Deze sleutels worden maar één keer getoond. Kopieer ze nu!`,copy:`Kopiëren`,noDataFound:`Er zijn geen gegevens gevonden om uit het back-upbestand te herstellen.`,close:`Sluiten`,scheduledBackup:`Geplande back-ups`,scheduledBackupDescription:`Maak automatisch back-upsnapshots volgens een schema. De uitvoermap kan aan een NAS of externe opslag worden gekoppeld.`,frequency:`Frequentie`,backupTime:`Tijd`,retention:`Bewaartermijn`,retentionDescription:`Aantal back-ups om te bewaren`,outputPath:`Uitvoerpad`,outputPathPlaceholder:`Standaard: {{path}}`,outputPathDescription:`Laat leeg voor standaardlocatie`,runNow:`Nu uitvoeren`,backupFiles:`Back-upbestanden`,noScheduledBackups:`Nog geen back-ups`,deleteBackup:`Verwijderen`,deleteBackupConfirm:`Dit back-upbestand verwijderen?`,backupRunning:`Back-up bezig...`,scheduledBackupComplete:`Back-up succesvol voltooid`,scheduledBackupFailed:`Back-up mislukt`,nextBackup:`Volgende back-up`,backupSize:`Grootte`,localTimeHint:`Lokale tijd ({{tz}})`,defaultPathLabel:`Standaard:`,pathCheck:{title:`Bambuddy kan niet naar deze map schrijven`,howToFix:`Oplossing:`,sandboxed:`De Bambuddy-service kan niet naar {{path}} schrijven. De systemd-unit draait met ProtectSystem=strict, waardoor elke map buiten de installatie-, data- en logmappen alleen-lezen is voor de service - zelfs als je er vanuit je eigen shell wel naar kunt schrijven.`,read_only:`{{path}} staat op een alleen-lezen bestandssysteem.`,permission_denied:`Bambuddy mag niet schrijven naar {{path}}. Controleer de eigenaar en machtigingen van de map.`,no_space:`Het bestandssysteem waarop {{path}} staat is vol.`,not_a_directory:`{{path}} bestaat, maar is geen map.`,missing:`{{path}} bestaat niet en kon niet worden aangemaakt.`,error:`Bambuddy kan niet schrijven naar {{path}}.`,ephemeralTitle:`Deze back-ups blijven niet behouden na een herstart van de container`,container_ephemeral:`{{path}} bevindt zich in de Bambuddy-container, niet op de host. Back-ups die daar worden opgeslagen gaan verloren wanneer de container opnieuw wordt aangemaakt. Koppel de map vanaf de host:`},categories:{settings:`Instellingen`,notification_providers:`Meldingsproviders`,notification_templates:`Meldingssjablonen`,smart_plugs:`Slimme stekkers`,printers:`Printers`,filaments:`Filamenten`,maintenance_types:`Onderhoudstypen`,archives:`Archieven`,projects:`Projecten`,pending_uploads:`Openstaande uploads`,external_links:`Externe links`,api_keys:`API-sleutels`}},tags:{title:`Tags`,addTag:`Tag toevoegen`,editTag:`Tag bewerken`,deleteTag:`Tag verwijderen`,tagName:`Tagnaam`,tagColor:`Tagkleur`,noTags:`Geen tags`,deleteConfirm:`Weet je zeker dat je deze tag wilt verwijderen?`,manageTags:`Tags beheren`},uploadModal:{title:`3MF-bestanden uploaden`,dragDrop:`Sleep .3mf-bestanden hierheen`,or:`of`,browseFiles:`Bestanden bladeren`,extractionInfo:`Het printermodel wordt automatisch uit de metadata van het 3MF-bestand gehaald.`,uploaded:`geüpload`,failed:`mislukt`,uploading:`Uploaden...`,upload:`Uploaden`,uploadFailed:`Upload mislukt`},editArchive:{title:`Archief bewerken`,name:`Naam`,namePlaceholder:`Afdruknaam`,printer:`Printer`,noPrinter:`Geen printer`,project:`Project`,noProject:`Geen project`,itemsPrinted:`Afgedrukte items`,itemsPrintedHelp:`Aantal items dat met deze afdruktaak is geproduceerd. Gebruik 0 als de hele plaat mislukt is.`,filamentUsed:`Gebruikt filament (g)`,filamentUsedPlaceholder:`bijv. 46.16`,filamentUsedHelp:`Stel dit handmatig in wanneer een afdruk zonder 3MF is gearchiveerd, zodat deze toch meetelt in de filamenttotalen. Bij het opnieuw scannen van een archief met een 3MF wordt de waarde weer uit het bestand gelezen.`,notes:`Notities`,notesPlaceholder:`Voeg notities over deze afdruk toe...`,externalLink:`Externe link`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Link naar Printables, Thingiverse of een andere bron`,tags:`Tags`,tagsPlaceholder:`Tags toevoegen...`,addMoreTags:`Meer tags toevoegen...`,matchingTags:`Komt overeen met "{{query}}"`,existingTags:`Bestaande tags`,clickToAdd:`(klik om toe te voegen)`,status:`Status`,failureReason:`Reden van mislukking`,selectReason:`Selecteer reden...`,photos:`Foto's van het afdrukresultaat`,photosHelp:`Klik op + om foto's van je afdrukresultaat toe te voegen`,printResult:`Afdrukresultaat`,saving:`Opslaan...`,failureReasons:{adhesionFailure:`Hechtingsprobleem`,spaghettiDetached:`Spaghetti / losgeraakt`,layerShift:`Laagverschuiving`,cloggedNozzle:`Verstopte nozzle`,filamentRunout:`Filament op`,warping:`Kromtrekken`,stringing:`Draadvorming`,underExtrusion:`Onderextrusie`,powerFailure:`Stroomuitval`,userCancelled:`Door gebruiker geannuleerd`,noStatusUpdate:`Geen statusupdate ontvangen`,other:`Overig`},statuses:{completed:`Voltooid`,failed:`Mislukt`,aborted:`Geannuleerd`,printing:`Bezig met afdrukken`}},kProfiles:{title:`K-profielen`,noPrintersConfigured:`Geen printers geconfigureerd`,addPrinterInSettings:`Voeg in Instellingen een printer toe om K-profielen te beheren`,noActivePrinters:`Geen actieve printers`,enablePrinterConnection:`Schakel een printerverbinding in om de K-profielen te bekijken`,loadingProfiles:`K-profielen laden...`,printerOffline:`Printer offline`,printerOfflineDesc:`De geselecteerde printer is niet verbonden. Schakel hem in om de K-profielen te bekijken.`,noMatchingProfiles:`Geen overeenkomende profielen`,noMatchingProfilesDesc:`Geen profielen komen overeen met je zoekcriteria`,noKProfiles:`Geen K-profielen`,noKProfilesDesc:`Geen pressure-advance-profielen gevonden voor een nozzle van {{diameter}} mm`,createFirstProfile:`Eerste profiel aanmaken`,printer:`Printer`,nozzle:`Nozzle`,refresh:`Vernieuwen`,addProfile:`Profiel toevoegen`,export:`Exporteren`,import:`Importeren`,select:`Selecteren`,selectAll:`Alles selecteren`,delete:`Verwijderen`,searchPlaceholder:`Zoeken op naam of filament...`,allExtruders:`Alle extruders`,leftOnly:`Alleen links`,rightOnly:`Alleen rechts`,allFlow:`Alle flowtypen`,hfOnly:`Alleen HF`,sOnly:`Alleen S`,sortName:`Sorteren: naam`,sortKValue:`Sorteren: K-waarde`,sortFilament:`Sorteren: filament`,leftExtruder:`Linker extruder`,rightExtruder:`Rechter extruder`,modal:{addTitle:`K-profiel toevoegen`,editTitle:`K-profiel bewerken`,profileName:`Profielnaam`,profileNamePlaceholder:`Mijn PLA-profiel`,kValue:`K-waarde`,kValuePlaceholder:`0.020`,kValueHelp:`Typisch bereik: 0.01 - 0.06 voor PLA, 0.02 - 0.10 voor PETG`,filament:`Filament`,selectFilament:`Selecteer filament...`,source:{local:`Geïmporteerd`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Ingebouwd`},noFilamentsHelp:`Geen filamenten beschikbaar. Meld je aan bij Bambu Cloud of importeer presets via Profielen → Lokale profielen.`,searchFilaments:`Filamenten zoeken...`,noFilamentMatches:`Geen filament komt overeen met die zoekopdracht`,flowType:`Flowtype`,highFlow:`Hoge flow`,standard:`Standaard`,nozzleSize:`Nozzlegrootte`,extruder:`Extruder`,extruders:`Extruders`,left:`Links`,right:`Rechts`,notes:`Notities (lokaal opgeslagen)`,notesPlaceholder:`Voeg notities over dit profiel toe...`,notesHelp:`Notities worden opgeslagen in Bambuddy, niet op de printer`,syncing:`Synchroniseren met printer...`,savingExtruder:`Opslaan naar extruder {{current}}/{{total}}...`,pleaseWait:`Even geduld`},deleteConfirm:{title:`Profiel verwijderen`,cannotUndo:`Dit kan niet ongedaan worden gemaakt`,message:`Weet je zeker dat je "{{name}}" van de printer wilt verwijderen?`},bulkDelete:{title:`Profielen verwijderen`,cannotUndo:`Dit kan niet ongedaan worden gemaakt`,message:`Weet je zeker dat je {{count}} geselecteerde profielen van de printer wilt verwijderen?`},toast:{profileSaved:`K-profiel opgeslagen`,profilesSaved:`K-profiel opgeslagen naar {{count}} extruders`,selectAtLeastOneExtruder:`Selecteer ten minste één extruder`,selectFilament:`Selecteer eerst een filament`,filamentNotResolvable:`Geen Bambu-filament-ID voor {{name}} — de printer kan hiervoor geen profiel opslaan`,profileDeleted:`K-profiel verwijderd`,profilesDeleted:`{{count}} profielen verwijderd`,exportedProfiles:`{{count}} profielen geëxporteerd`,importedProfiles:`{{count}} van {{total}} profielen geïmporteerd`,noProfilesToExport:`Geen profielen om te exporteren`,invalidFileFormat:`Ongeldig bestandsformaat`,failedToParseImport:`Importbestand kon niet worden verwerkt`,failedToSaveBatch:`K-profielen opslaan mislukt`,noteSaved:`Notitie opgeslagen`,failedToSaveNote:`Notitie opslaan mislukt`},permission:{noRead:`Je hebt geen toestemming om profielen te vernieuwen`,noCreate:`Je hebt geen machtiging om profielen toe te voegen`,noUpdate:`Je hebt geen machtiging om K-profielen bij te werken`,noDelete:`Je hebt geen machtiging om K-profielen te verwijderen`,noExport:`Je hebt geen machtiging om profielen te exporteren`,noImport:`Je hebt geen machtiging om profielen te importeren`}},virtualPrinter:{title:`Virtuele printer`,running:`Actief`,stopped:`Gestopt`,description:{default:`Schakel een virtuele printer in die zichtbaar wordt in Bambu Studio en OrcaSlicer. Bestanden die naar deze printer worden gestuurd, worden direct gearchiveerd zonder te worden afgedrukt.`,proxy:`Schakel een proxy in die slicerverkeer doorstuurt naar een echte printer, zodat je via elk netwerk op afstand kunt afdrukken.`},enable:{title:`Virtuele printer inschakelen`,visibleInSlicer:`Zichtbaar als "Bambuddy" in slicerdetectie`,proxyingTo:`Proxy naar {{name}}`,notActive:`Niet actief`},model:{title:`Printermodel`,description:`Selecteer welk printermodel moet worden geëmuleerd.`,restartWarning:`Als je het model wijzigt, wordt de virtuele printer opnieuw gestart`},accessCode:{title:`Toegangscode`,isSet:`Toegangscode is ingesteld`,notSet:`Geen toegangscode ingesteld - vereist om in te schakelen`,placeholder:`Voer een code van 8 tekens in`,placeholderChange:`Voer een nieuwe code in om te wijzigen`,hint:`Moet precies 8 tekens zijn. Wordt door slicers gebruikt voor authenticatie.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Overgenomen van doelprinter`,derivedFromTargetHint:`Gebruikt de toegangscode van de doelprinter. De bridge stuurt de slicerauthenticatie door naar de echte printer, dus de codes moeten overeenkomen — bewerk de toegangscode van de printer om deze waarde te wijzigen.`,reveal:`Toegangscode tonen`,hide:`Toegangscode verbergen`},targetPrinter:{title:`Doelprinter`,configured:`Proxydoel geconfigureerd`,notConfigured:`Geen doelprinter geselecteerd - vereist voor proxymodus`,placeholder:`Selecteer een printer...`,hint:`Selecteer de printer waarnaar slicerverkeer via de proxy moet worden doorgestuurd. De printer moet in LAN-modus staan.`,noPrinters:`Geen printers geconfigureerd. Voeg eerst een printer toe om de proxymodus te gebruiken.`},remoteInterface:{title:`Overschrijving netwerkinterface`,configured:`Interface-overschrijving actief`,optional:`Optioneel - gebruik dit als het automatisch gedetecteerde IP-adres onjuist is (bijv. meerdere NIC's, Docker, VPN)`,placeholder:`Automatisch detecteren (standaard)...`,hint:`Overschrijf het IP-adres dat via SSDP wordt geadverteerd en in het TLS-certificaat wordt gebruikt. Handig wanneer Bambuddy meerdere netwerkinterfaces heeft.`},mode:{title:`Modus`,archive:`Archief`,archiveDesc:`Bestanden direct archiveren`,review:`Beoordelen`,reviewDesc:`Beoordelen vóór archiveren`,queue:`Wachtrij`,queueDesc:`Archiveren en aan wachtrij toevoegen`,proxy:`Proxy`,proxyDesc:`Doorsturen naar echte printer`},autoDispatch:{title:`Automatisch verzenden`,description:`Start afdrukken automatisch wanneer ze aan de wachtrij worden toegevoegd. Als dit uitstaat, wachten afdrukken op handmatige verzending.`},queueForceColorMatch:{title:`Kleurmatch afdwingen`,description:`Weiger een taak te verzenden naar een printer waarop niet exact het juiste filamenttype en de juiste kleur zijn geladen. Standaard uit — zonder dit gebruikt de wachtrij alleen modelmatching en kan een printer worden gekozen waarop de verkeerde kleur is geladen.`},saveAmsMapping:{title:`AMS-toewijzing opslaan`,description:`Sla de AMS-slotkeuze van de slicer zelf (uit de MQTT-opdracht project_file) op in het archief, zodat bij later opnieuw afdrukken exact dezelfde fysieke spoel wordt gebruikt in plaats van opnieuw een keuze af te leiden uit type/kleur van het bestand. Standaard uit.`},gcodeInjection:{title:`G-code-injectie`,description:`Pas de per model ingestelde G-codefragmenten uit Instellingen toe op taken van deze VP. Standaard uit.`},tailscaleDisabled:{title:`Tailscale-integratie`,description:`Schakel dit in om deze VP als via Tailscale beschikbaar te markeren. Toont het Tailscale-adres van de host, zodat je weet welk IP-adres je in de slicer moet invoeren. De stap voor het importeren van de CA blijft hetzelfde — deze schakelaar heeft geen invloed op certificaten.`},setupRequired:{title:`Installatie vereist`,description:`Voor de functie virtuele printer is aanvullende systeemconfiguratie nodig voordat deze werkt. Dit omvat port forwarding, firewallregels en platformspecifieke instellingen.`,readGuide:`Lees de installatiehandleiding voordat je dit inschakelt`},archiveNameSource:{title:`Bron voor archiefnaam`,description:`Kies hoe nieuwe archieven worden genoemd wanneer bestanden via de virtuele printer binnenkomen. "Metadata" gebruikt de in de slicer opgenomen Titel uit de 3MF (standaard). "Bestandsnaam" gebruikt de bestandsnaam die Bambu Studio via FTP heeft verzonden. Let op: Bambu Studio overschrijft de naam die je in het dialoogvenster "naar printer verzenden" invoert met het Titel-veld van de 3MF wanneer dat aanwezig is, waardoor beide modi vaak dezelfde tekst opleveren.`,metadata:`Metadata`,filename:`Bestandsnaam`},caCert:{title:`Slicercertificaat`,description:`Virtuele printers gebruiken een TLS-certificaat dat is ondertekend door de Bambuddy-CA. Importeer dit CA-certificaat eenmalig in de trust store van je slicer zodat de verbinding wordt geaccepteerd — je hoeft het niet via de opdrachtregel te kopiëren.`,copy:`Kopiëren`,copied:`Gekopieerd`,download:`Downloaden`,fingerprint:`SHA-256`},howItWorks:{title:`Hoe het werkt`,step1:`Op hetzelfde LAN verschijnen virtuele printers automatisch in je slicer (Bambu Studio / OrcaSlicer) via detectie. Vanaf andere netwerken voeg je ze handmatig toe met IP-adres en toegangscode.`,step2:`Gebruik in de modi Archief, Beoordelen en Wachtrij de knop "Verzenden" in je slicer om 3MF-bestanden naar Bambuddy te uploaden. De slicer toont "Afdruk geslaagd" — het bestand wordt opgeslagen, niet afgedrukt.`,step3:`In proxymodus stuurt de virtuele printer al het verkeer door naar een echte printer — afdrukken starten direct alsof je rechtstreeks verbonden bent.`},status:{title:`Statusdetails`,printerName:`Printernaam`,model:`Model`,serialNumber:`Serienummer`,mode:`Modus`,pendingFiles:`Bestanden in behandeling`,targetPrinter:`Doelprinter`,ftpPort:`FTP-poort`,mqttPort:`MQTT-poort`,ftpConnections:`FTP-verbindingen`,mqttConnections:`MQTT-verbindingen`},toast:{updated:`Instellingen virtuele printer bijgewerkt`,failedToUpdate:`Instellingen bijwerken mislukt`,copyFailed:`Kopiëren mislukt — probeer de tekst handmatig te selecteren`,accessCodeRequired:`Stel eerst een toegangscode in`,targetPrinterRequired:`Selecteer eerst een doelprinter`,bindIpRequired:`Stel eerst een bind-IP in`,accessCodeEmpty:`Toegangscode mag niet leeg zijn`,accessCodeLength:`Toegangscode moet precies 8 tekens zijn`,targetCodeChangedRebind:`De toegangscode komt nu overeen met de nieuwe doelprinter. Voeg dit apparaat opnieuw toe in je slicer om de nieuwe code te gebruiken.`,created:`Virtuele printer aangemaakt`,failedToCreate:`Virtuele printer aanmaken mislukt`,deleted:`Virtuele printer verwijderd`,failedToDelete:`Virtuele printer verwijderen mislukt`},list:{title:`Virtuele printers`,add:`Toevoegen`,addFirst:`Virtuele printer toevoegen`,empty:`Geen virtuele printers geconfigureerd. Voeg er een toe om te beginnen.`},bindIp:{title:`Bind-interface`,placeholder:`Selecteer interface...`,hint:`Netwerkinterface waaraan deze virtuele printer wordt gekoppeld. Moet uniek zijn per printer.`},proxy:{accessCodeHint:`Gebruik in proxymodus de toegangscode van je doelprinter in de slicer. De verbinding wordt transparant doorgestuurd naar de echte printer.`},addDialog:{title:`Virtuele printer toevoegen`,name:`Naam`,hint:`Je kunt de toegangscode, doelprinter en andere instellingen na het aanmaken configureren.`,create:`Maken`},deleteConfirm:{title:`Virtuele printer verwijderen`,message:`Weet je zeker dat je "{{name}}" wilt verwijderen? Hiermee worden alle services voor deze printer gestopt.`}},modelViewer:{openInSlicer:`Openen in slicer`,openInSlicerWith:`Openen in {{slicer}}`,moreSlicerOptions:`Meer sliceropties`,openInSlicerFailed:`Kon niet openen in slicer`,tabs:{model:`3D-model`},notAvailable:`niet beschikbaar`,plates:`Platen`,allPlates:`Alle platen`,plateNumber:`Plaat {{number}}`,plateCount:`{{count}} plaat`,plateCount_other:`{{count}} platen`,objectCount:`{{count}} object`,objectCount_other:`{{count}} objecten`,filamentCount:`{{count}} filament`,filamentCount_other:`{{count}} filamenten`,eta:`ETA {{minutes}} min`,noPreview:`Geen voorbeeld beschikbaar voor dit bestand`,pagination:{pageOf:`Pagina {{current}} van {{total}}`,prev:`Vorige`,next:`Volgende`},errors:{failedToLoad:`Bestand laden mislukt`,noMeshes:`Geen meshes gevonden in 3MF-bestand`,unsupportedFormat:`Niet-ondersteund bestandsformaat`}},maintenanceDescriptions:{lubricateCarbonRods:`Breng smeermiddel aan op de carbonstangen voor soepele beweging`,lubricateRails:`Breng smeermiddel aan op de lineaire rails voor soepele beweging`,cleanNozzle:`Reinig hotend en nozzle om verstoppingen te voorkomen`,checkBelts:`Controleer de riemspanning voor nauwkeurige afdrukken`,cleanBuildPlate:`Reinig de bouwplaat voor betere hechting`,checkExtruder:`Controleer de extrudertandwielen op slijtage`,checkCooling:`Controleer of de koelventilatoren goed werken`,generalInspection:`Algemene printerinspectie`,cleanCarbonRods:`Reinig de carbonstangen om wrijving te verminderen`,lubricateSteelRods:`Breng smeermiddel aan op de stalen stangen voor soepele beweging`,cleanSteelRods:`Reinig de stalen stangen om wrijving te verminderen`,cleanLinearRails:`Veeg de lineaire rails schoon om stof en vuil te verwijderen`,checkPtfeTube:`Controleer de PTFE-buis op slijtage of beschadiging`,replaceHepaFilter:`Vervang het HEPA-filter voor een goede luchtkwaliteit`,replaceCarbonFilter:`Vervang het actieve-koolfilter`,lubricateLeftNozzleRail:`Smeer de linker nozzlerail (H2-serie)`},haSensors:{label:`Sensoren`,unavailable:`Niet beschikbaar`,blocksPrints:`{{entity}} — houdt afdrukken tegen en geeft een melding`,states:{open:`Open`,closed:`Gesloten`,unlocked:`Ontgrendeld`,locked:`Vergrendeld`,detected:`Gedetecteerd`,clear:`Wissen`,wet:`Nat`,dry:`Droog`,problem:`Probleem`,ok:`OK`,running:`Actief`,stopped:`Gestopt`,on:`Aan`,off:`Uit`},sectionTitle:`Home Assistant-sensoren`,add:`Sensor toevoegen`,addTitle:`Home Assistant-sensor toevoegen`,editTitle:`Home Assistant-sensor bewerken`,empty:`Nog geen sensoren. Koppel een deurcontact of thermometer uit Home Assistant om deze op een printerkaart te tonen.`,unknownPrinter:`Onbekende printer`,badgeBlocks:`Houdt afdrukken tegen`,badgeNotifies:`Meldt`,badgeHidden:`Verborgen op kaart`,printer:`Printer`,entity:`Entiteit`,searchPlaceholder:`Entiteiten zoeken...`,noEntities:`Geen overeenkomende entiteiten`,name:`Weergavenaam`,alertWhen:`Waarschuwen wanneer`,alertNever:`Nooit — alleen weergeven`,alertAbove:`Boven`,alertBelow:`Onder`,alertHint:`De alarmstatus markeert de sensor op de printerkaart en schakelt de onderstaande opties in.`,showOnCard:`Tonen op printerkaart`,notifyOnAlert:`Stuur een melding wanneer een alarm begint`,blockPrint:`Houd afdrukken in de wachtrij tegen zolang er een alarm is`,blockPrintHint:`Taken blijven in de wachtrij en starten vanzelf zodra de sensor weer normaal is. Wordt genegeerd als Home Assistant niet bereikbaar is.`,toast:{created:`Sensor toegevoegd`,updated:`Sensor opgeslagen`,deleted:`Sensor verwijderd`},error:{pickEntity:`Kies een Home Assistant-entiteit`,nameRequired:`Voer een weergavenaam in`,printerRequired:`Kies een printer`,alertRequired:`Stel eerst een alarmvoorwaarde in`}},locationHaSensors:{sectionTitle:`Home Assistant-sensoren (opslaglocaties)`,sectionDescription:`Koppel temperatuur-, luchtvochtigheids- of batterijsensoren uit Home Assistant aan je opslaglocaties om live waarden te tonen op de filamentkaart en in de tabel. Per locatie is één sensor per categorie toegestaan.`,add:`Sensor toevoegen`,addTitle:`Home Assistant-sensor toevoegen`,editTitle:`Home Assistant-sensor bewerken`,empty:`Nog geen sensoren. Koppel een temperatuur- of luchtvochtigheidssensor uit Home Assistant om deze op de filamentkaart te tonen.`,unknownLocation:`Onbekende locatie`,location:`Opslaglocatie`,showOnCard:`Tonen op filamentkaart`,overwriteConfirm:{title:`Bestaande sensor vervangen?`,messageTemperature:`"{{location}}" heeft al een temperatuursensor gekoppeld: {{name}}. Doorgaan vervangt deze.`,messageHumidity:`"{{location}}" heeft al een luchtvochtigheidssensor gekoppeld: {{name}}. Doorgaan vervangt deze.`,messageBattery:`"{{location}}" heeft al een batterijsensor gekoppeld: {{name}}. Doorgaan vervangt deze.`},autoAdd:{confirmTitle:`De andere sensoren ook toevoegen?`,confirmMessage:`Bambuddy heeft ook andere sensoren voor deze locatie gevonden. Kies welke je ook wilt toevoegen.`,added:`Ook toegevoegd: {{names}}`,noneFound:`Geen bijpassende temperatuur-, luchtvochtigheids- of batterijsensoren gevonden voor deze locatie.`,onlyThisOne:`Alleen deze`},options:{buttonLabel:`Sensoropties`,title:`Opties voor locatiesensoren`,description:`Deze waarden worden gebruikt wanneer een temperatuur-, luchtvochtigheids- of batterijsensor automatisch wordt gekoppeld naast de eerste sensor van een locatie.`,generalSettings:`Algemene instellingen`,pollInterval:`Bijwerkinterval (seconden)`,pollIntervalHint:`Hoe vaak Bambuddy Home Assistant raadpleegt en sensorwaarden op het scherm ververst. Minimaal 60 seconden.`,colorizeValues:`Sensorwaarden inkleuren op basis van hun alarmdrempels`,aboveColor:`Kleur boven drempel`,belowColor:`Kleur onder drempel`,optimalColor:`Kleur bij optimale waarde`,colors:{red:`Rood`,orange:`Oranje`,yellow:`Geel`,green:`Groen`,blue:`Blauw`,purple:`Paars`,pink:`Roze`},saved:`Opties opgeslagen`,saveFailed:`Opslaan van opties mislukt`,reset:`Herstellen`,resetConfirm:{title:`Alle bestaande locatiesensoren herstellen?`,message:`Dit overschrijft de alarmdrempels, meldingen en kaartzichtbaarheid van elke bestaande temperatuur-, luchtvochtigheids- en batterijsensor van opslaglocaties met de hierboven ingestelde waarden, en herstelt de naam van elke sensor naar de vriendelijke naam uit Home Assistant — printersensoren blijven ongewijzigd. Dit kan niet ongedaan worden gemaakt. Afhankelijk van het aantal sensoren kan dit even duren.`},resetDone:`Toegepast op {{count}} locatiesensoren`,resetFailed:`Herstellen van locatiesensoren mislukt`},deleteAllConfirm:{title:`Alle sensoren verwijderen?`,message:`Hiermee worden alle {{count}} sensoren verwijderd die aan "{{location}}" zijn gekoppeld. Dit kan niet ongedaan worden gemaakt.`},currentlyBound:`Momenteel gekoppeld: {{entity}}`,error:{locationRequired:`Kies een opslaglocatie`},toast:{created:`Sensor toegevoegd`,updated:`Sensor opgeslagen`,deleted:`Sensor verwijderd`}},smartPlugs:{offline:`Offline`,admin:`Beheerder`,openPlugAdminPage:`Beheerpagina van stekker openen`,deleteSmartPlug:`Slimme stekker verwijderen`,turnOnSmartPlug:`Slimme stekker inschakelen`,turnOffSmartPlug:`Slimme stekker uitschakelen`,turnOn:`Inschakelen`,turnOff:`Uitschakelen`,addSmartPlug:{scanningNetwork:`Netwerk scannen...`,chooseEntity:`Kies een entiteit...`,connectionFailed:`Verbinding mislukt`,searchEntities:`Entiteiten zoeken...`,searchPowerSensors:`Vermogenssensoren zoeken...`,searchEnergySensors:`Energiesensoren zoeken...`,placeholders:{plugName:`Woonkamerstekker`,mqttStateOnValue:`AAN, true, 1`,mqttSameAsPower:`Hetzelfde als vermogensonderwerp, of anders`}},linkedTo:`Gekoppeld aan:`,monitorOnly:`Alleen bewaken`,alerts:`Waarschuwingen`,scheduleOn:`Aan {{time}}`,scheduleOff:`Uit {{time}}`,on:`Aan`,off:`Uit`,power:`Vermogen`,kwhToday:`kWh vandaag`,settings:`Instellingen`,automationSettings:`Automatiseringsinstellingen`,showInSwitchbar:`Tonen in schakelbalk`,quickAccessSidebar:`Snelle toegang vanuit de zijbalk`,enabled:`Ingeschakeld`,enableAutomation:`Automatisering voor deze stekker inschakelen`,autoOn:`Automatisch aan`,autoOnDescription:`Inschakelen wanneer afdruk start`,autoOff:`Automatisch uit`,autoOffDescription:`Uitschakelen wanneer afdruk is voltooid (eenmalig)`,autoOffPersistent:`Ingeschakeld houden`,autoOffPersistentDescription:`Ingeschakeld blijven tussen afdrukken in plaats van eenmalig`,controlsPrinterPower:`Voedt de printer`,controlsPrinterPowerDescription:`Schakel dit uit als deze stekker alleen een accessoire voedt (filterventilator, verlichting). Anders wordt de printer als offline gemarkeerd wanneer je hem uitschakelt.`,autoOffAfterDrying:`Automatisch uitschakelen na drogen`,autoOffAfterDryingDescription:`Uitschakelen wanneer AMS-drogen is voltooid`,delayAfterDryingMinutes:`Droogvertraging (minuten)`,turnOffDelayMode:`Modus uitschakelvertraging`,time:`Tijd`,temp:`Temp`,delayMinutes:`Vertraging (minuten)`,tempThreshold:`Temperatuurdrempel (°C)`,tempThresholdDescription:`Schakelt uit wanneer de nozzle onder deze temperatuur is afgekoeld`,edit:`Bewerken`,deleteConfirm:`Weet je zeker dat je "{{name}}" wilt verwijderen? Dit kan niet ongedaan worden gemaakt.`,turnOnConfirm:`Weet je zeker dat je "{{name}}" wilt inschakelen?`,turnOffConfirm:`Weet je zeker dat je "{{name}}" wilt uitschakelen? Hierdoor wordt de stroom naar het aangesloten apparaat onderbroken.`,failedToTurn:`"{{name}}" {{action}} schakelen mislukt`,unknown:`Onbekend`,addTitle:`Slimme stekker toevoegen`,editTitle:`Slimme stekker bewerken`,stopScanning:`Scannen stoppen`,discoverTasmota:`Tasmota-apparaten zoeken`,foundDevices:`{{count}} apparaat/apparaten gevonden - klik om te selecteren:`,noDevicesFound:`Geen Tasmota-apparaten gevonden op je netwerk`,haNotConfigured:`Home Assistant is niet geconfigureerd. Stel dit in via`,haSettingsPath:`Instellingen → Netwerk → Home Assistant`,selectEntity:`Selecteer entiteit *`,ipAddress:`IP-adres *`,nameLabel:`Naam *`,username:`Gebruikersnaam`,password:`Wachtwoord`,authHint:`Laat leeg als je Tasmota-apparaat geen authenticatie vereist`,linkToPrinter:`Koppelen aan printer`,noPrinter:`Geen printer (alleen handmatige bediening)`,linkingDescription:`Koppelen maakt automatisch in-/uitschakelen mogelijk wanneer afdrukken starten/voltooien`,powerAlerts:`Vermogenswaarschuwingen`,alertAbove:`Waarschuwen indien boven (W)`,alertBelow:`Waarschuwen indien onder (W)`,alertDescription:`Ontvang een melding wanneer het stroomverbruik deze drempels overschrijdt. Laat leeg om die richting uit te schakelen.`,dailySchedule:`Dagelijks schema`,turnOnAt:`Inschakelen om`,turnOffAt:`Uitschakelen om`,scheduleDescription:`Schakel de stekker dagelijks automatisch op deze tijden in/uit. Laat leeg om die actie over te slaan.`,showOnPrinterCard:`Tonen op printerkaart`,displayOnPrinterCard:`Knop op printerkaart weergeven`,connectedResult:`Verbonden!`,deviceLabel:`Apparaat: {{name}} - `,stateLabel:`Status: {{state}}`,test:`Testen`,delete:`Verwijderen`,save:`Opslaan`,add:`Toevoegen`,cancel:`Annuleren`,failedToStartScan:`Scan starten mislukt`,nameRequired:`Naam is verplicht`,entityRequired:`Entiteit is verplicht voor Home Assistant-stekkers`,mqttTopicRequired:`Ten minste één MQTT-topic moet zijn geconfigureerd voor bewaking van vermogen, energie of status`,loadingEntities:`Entiteiten laden...`,loading:`Laden...`,failedToLoadEntities:`Entiteiten laden mislukt: {{error}}`,noEntitiesMatching:`Geen entiteiten gevonden die overeenkomen met "{{search}}"`,noEntitiesAvailable:`Geen entiteiten beschikbaar`,searchingEntities:`Alle entiteiten doorzoeken ({{count}} gevonden)`,showingEntities:`Toont switch, light, input_boolean ({{count}} beschikbaar)`,energyMonitoringOptional:`Energiemonitoring (optioneel)`,energyMonitoringHint:`Zoek en selecteer sensoren die vermogens-/energiegegevens leveren.`,powerSensorW:`Vermogenssensor (W)`,energyTodayKwh:`Energie vandaag (kWh)`,totalEnergyKwh:`Totale energie (kWh)`,noMatchingSensors:`Geen overeenkomende sensoren`,none:`Geen`,mqttNotConfigured:`MQTT-broker niet geconfigureerd. Stel het brokeradres in via`,mqttSettingsPath:`Instellingen → Netwerk → MQTT-publicatie`,mqttNotConfiguredSuffix:`(je hoeft publicatie niet in te schakelen; vul alleen de brokergegevens in).`,mqttMonitorOnlyDescription:`MQTT-stekkers ontvangen vermogens-/energiegegevens via een MQTT-abonnement. In-/uitschakelen is niet beschikbaar - gebruik je MQTT-broker of domoticasysteem.`,powerMonitoring:`Vermogensbewaking`,energyMonitoring:`Energiemonitoring`,stateMonitoring:`Statusbewaking`,optional:`optioneel`,topic:`Topic`,jsonPath:`JSON-pad`,multiplier:`Vermenigvuldigingsfactor`,onValue:`AAN-waarde`,mqttPowerHint:`JSON-pad haalt de waarde uit een JSON-payload (bijv. "power_l1"). Laat leeg als het topic ruwe numerieke waarden publiceert.
 Gebruik vermenigvuldigingsfactor 0.001 voor mW→W, 1000 voor kW→W.`,mqttEnergyHint:`JSON-pad haalt de waarde uit een JSON-payload. Laat leeg voor ruwe waarden.
 Gebruik vermenigvuldigingsfactor 0.001 voor Wh→kWh, 1000 voor MWh→kWh.`,mqttStateHint:`JSON-pad haalt de waarde uit een JSON-payload. Laat leeg voor ruwe waarden.
-AAN-waarde: de exacte tekenreeks die "AAN" betekent. Laat leeg voor automatische detectie (ON, true, 1).`,restControl:`Bedienen`,restOnUrl:`URL voor AAN`,restOffUrl:`URL voor UIT`,restOnBody:`Requestbody AAN`,restOffBody:`Requestbody UIT`,restMethod:`HTTP-methode`,restHeaders:`Aangepaste headers (JSON)`,restStatusUrl:`Status-URL`,restStatusPath:`JSON-pad status`,restStatusOnValue:`AAN-waarde`,restPowerUrl:`Vermogens-URL`,restPowerPath:`JSON-pad vermogen`,restPowerMultiplier:`Vermenigvuldigingsfactor vermogen`,restEnergyUrl:`Energie-URL`,restEnergyPath:`JSON-pad energie (vandaag)`,restEnergyTotalPath:`JSON-pad energie (totaal)`,restEnergyTotalMultiplier:`Vermenigvuldigingsfactor totaal`,restEnergyTotalPathHint:`bijv. aenergy.total`,restEnergyTotalHint:`Veel stekkers — waaronder alle Shelly's — rapporteren alleen een totale teller die nooit wordt gereset. Die hoort hier en niet in het veld hierboven: als je hem als verbruik van vandaag leest, wordt hij om middernacht niet gereset en blijven Gisteren en Totaal leeg. Bambuddy berekent Vandaag en Gisteren hieruit; het duurt één of twee dagen aan metingen voordat die gevuld zijn. Een Shelly rapporteert wattuur, dus gebruik een vermenigvuldigingsfactor van 0.001.`,restEnergyMultiplier:`Vermenigvuldigingsfactor energie`,restUrlRequired:`Ten minste één URL (AAN of UIT) is vereist voor REST-stekkers`,restHeadersHint:`bijv. {"Authorization": "Bearer your-token"}`,restBodyHint:`bijv. ON, {"state": "on"}`,restStatusHint:`URL om de huidige status op te vragen`,restPathHint:`bijv. state of data.power.status`,restPowerUrlHint:`Afzonderlijke URL voor vermogensgegevens (gebruikt Status-URL als deze leeg is)`,restEnergyUrlHint:`Afzonderlijke URL voor energiegegevens (gebruikt Status-URL als deze leeg is)`,restEnergyHint:`Elke waarde kan een eigen URL gebruiken of terugvallen op de Status-URL. Gebruik vermenigvuldigingsfactoren voor eenheidsconversie (bijv. 0.001 om Wh naar kWh om te rekenen).`,testConnection:`Verbinding testen`,connectionSuccess:`Verbinding geslaagd`,noSwitchesInSwitchbar:`Geen schakelaars in de schakelbalk`,enableSwitchbarHint:`Schakel "Tonen in schakelbalk" in via Instellingen > Slimme stekkers`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`E-mail`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`SMTP-e-mailmeldingen`,telegram:`Meldingen via Telegram-bot`,discord:`Versturen naar Discord-kanaal via webhook`,ntfy:`Gratis, zelf te hosten pushmeldingen`,pushover:`Eenvoudige, betrouwbare pushmeldingen`,callmebot:`Gratis WhatsApp-meldingen via CallMeBot`,webhook:`Algemene HTTP POST naar elke URL`,homeassistant:`Blijvende meldingen in het Home Assistant-dashboard`,bark:`iOS-pushmeldingen via Bark (zelf te hosten)`},lastSuccess:`Laatste: {{date}}`,error:`Fout`,printer:`Printer:`,allPrinters:`Alle printers`,sendTestNotification:`Testmelding verzenden`,eventSettings:`Gebeurtenisinstellingen`,enabled:`Ingeschakeld`,sendFromProvider:`Meldingen via deze provider verzenden`,printEvents:`Afdrukgebeurtenissen`,printerStatus:`Printerstatus`,amsAlarms:`AMS-alarmen`,amsHtAlarms:`AMS-HT-alarmen`,printQueue:`Afdrukwachtrij`,start:`Start`,plateCheck:`Plaatcontrole`,complete:`Voltooid`,failed:`Mislukt`,stopped:`Gestopt`,progress:`Voortgang`,offline:`Offline`,lowFilament:`Weinig filament`,maintenance:`Onderhoud`,amsHumidity:`AMS-luchtvochtigheid`,amsTemp:`AMS-temp`,amsDryingSuspended:`Drogen onderbroken`,amsHtHumidity:`AMS-HT-luchtvochtigheid`,amsHtTemp:`AMS-HT-temp`,bedCooled:`Bed afgekoeld`,firstLayer:`Eerste laag`,quiet:`Stil`,digest:`Samenvatting {{time}}`,printStarted:`Afdruk gestart`,plateNotEmpty:`Plaat niet leeg`,plateNotEmptyDescription:`Objecten gedetecteerd vóór afdrukken`,plateClearRequired:`Bevestiging lege plaat vereist`,plateClearRequiredDescription:`Afdruk voltooid, wachtrij wacht op bevestiging van de plaat`,plateClear:`Plaat leeg`,printCompleted:`Afdruk voltooid`,bedCooledLabel:`Bed afgekoeld`,bedCooledDescription:`Bed na afdruk afgekoeld tot onder drempel`,firstLayerCompleteLabel:`Eerste laag voltooid`,firstLayerCompleteDescription:`Melden met momentopname wanneer de eerste laag is voltooid`,missingSpoolAssignmentLabel:`Ontbrekende spoeltoewijzing`,billingChargeFailedLabel:`Kostenregistratie mislukt`,billingChargeFailedDescription:`Melden wanneer afdrukkosten niet konden worden geregistreerd`,missingSpoolAssignmentDescription:`Melden wanneer een afdruk start en vereiste trays geen toegewezen spoel hebben`,printFailed:`Afdruk mislukt`,printStopped:`Afdruk gestopt`,progressMilestones:`Voortgangsmijlpalen`,progressMilestonesDescription:`Melden bij 25%, 50%, 75%`,printerOffline:`Printer offline`,printerError:`Printerfout`,aiFailureDetection:`AI-foutdetectie`,aiFailureDetectionDescription:`Melden wanneer Obico AI een mogelijke afdrukfout detecteert`,lowFilamentLabel:`Weinig filament`,maintenanceDue:`Onderhoud nodig`,maintenanceDueDescription:`Melden wanneer onderhoud nodig is`,amsHumidityHigh:`AMS-luchtvochtigheid hoog`,amsHumidityHighDescription:`Luchtvochtigheid van normale AMS overschrijdt drempel`,amsTemperatureHigh:`AMS-temperatuur hoog`,amsTemperatureHighDescription:`Temperatuur van normale AMS overschrijdt drempel`,amsDryingSuspendedTitle:`Automatisch drogen gestopt`,amsDryingSuspendedDescription:`Automatisch drogen heeft een AMS-eenheid opgegeven omdat de luchtvochtigheid niet onder de drempel kwam`,amsHtHumidityHigh:`AMS-HT-luchtvochtigheid hoog`,amsHtHumidityHighDescription:`AMS-HT-luchtvochtigheid overschrijdt drempel`,amsHtTemperatureHigh:`AMS-HT-temperatuur hoog`,amsHtTemperatureHighDescription:`AMS-HT-temperatuur overschrijdt drempel`,inventoryAlerts:`Voorraadwaarschuwingen`,stockReorderAlert:`Bestelwaarschuwing`,stockReorderAlertDescription:`SKU heeft het bestelpunt bereikt`,stockBreakAlert:`Voorraadtekortwaarschuwing`,stockBreakAlertDescription:`Voorraad raakt op voordat aanvulling arriveert`,jobAdded:`Taak toegevoegd`,jobAddedDescription:`Taak toegevoegd aan wachtrij`,jobAssigned:`Taak toegewezen`,jobAssignedDescription:`Modelgebaseerde taak toegewezen aan printer`,jobStarted:`Taak gestart`,jobStartedDescription:`Wachtrijtaak begonnen met afdrukken`,jobWaiting:`Taak wacht`,jobWaitingDescription:`Taak wacht op filament of printer`,jobSkipped:`Taak overgeslagen`,jobSkippedDescription:`Taak overgeslagen (vorige mislukt)`,jobFailed:`Taak mislukt`,jobFailedDescription:`Taak kon niet starten`,queueComplete:`Wachtrij voltooid`,queueCompleteDescription:`Alle wachtrijtaken voltooid`,quietHours:`Stille uren`,noNotificationsDuring:`Geen meldingen tijdens deze uren`,editProviderToChangeQuietHours:`Bewerk provider om stille uren te wijzigen`,dailyDigest:`Dagelijkse samenvatting`,batchNotifications:`Bundel meldingen in één dagelijkse samenvatting`,sendAt:`Verzenden om {{time}}`,editProviderToChangeDigestTime:`Bewerk provider om tijdstip van samenvatting te wijzigen`,edit:`Bewerken`,deleteProvider:`Meldingsprovider verwijderen`,deleteConfirm:`Weet je zeker dat je "{{name}}" wilt verwijderen? Dit kan niet ongedaan worden gemaakt.`,delete:`Verwijderen`,addTitle:`Meldingsprovider toevoegen`,editTitle:`Meldingsprovider bewerken`,nameLabel:`Naam *`,namePlaceholder:`Mijn meldingen`,providerTypeLabel:`Providertype *`,configuration:`Configuratie`,testConfiguration:`Configuratie testen`,printerFilter:`Printerfilter`,onlyFromPrinter:`Alleen meldingen verzenden voor gebeurtenissen van deze printer`,quietHoursDnd:`Stille uren (Niet storen)`,quietStart:`Start`,quietEnd:`Einde`,dailyDigestLabel:`Dagelijkse samenvatting`,sendDigestAt:`Samenvatting verzenden om`,digestCollected:`Gebeurtenissen worden verzameld en op dit tijdstip als één samenvatting verzonden`,notificationEvents:`Meldingsgebeurtenissen`,progressPercent:`(25%, 50%, 75%)`,bedCooledAfterPrint:`(nadat de afdruk is voltooid)`,haSensorAlert:`Sensorwaarschuwing`,haSensorAlertDescription:`(een gekoppelde Home Assistant-sensor vereist aandacht)`,locationHaSensorAlert:`Sensoralarm opslaglocatie`,locationHaSensorAlertDescription:`(een Home Assistant-sensor die aan een opslaglocatie is gekoppeld vereist aandacht)`,eventPriority:{sectionTitle:`ntfy-prioriteit`,helpNtfy:`Kies een prioriteit voor elke ingeschakelde gebeurtenis. ntfy gebruikt deze om waarschuwingen op te schalen (geluid, zichtbaarheid, pushgedrag). Niveaus die hier niet zijn ingesteld gebruiken de standaardwaarde van de ntfy-server.`,min:`Min`,low:`Laag`,default:`Standaard`,high:`Hoog`,urgent:`Urgent`},cancel:`Annuleren`,save:`Opslaan`,add:`Toevoegen`,nameRequired:`Naam is verplicht`,fieldRequired:`{{field}} is verplicht`,haDataInvalid:`Het veld Data moet een geldig JSON-object zijn, bijv. {"priority": "high", "ttl": 0}`,phoneNumber:`Telefoonnummer`,apiKey:`API-sleutel`,serverUrl:`Server-URL`,topic:`Topic`,authToken:`Authenticatietoken`,userKey:`Gebruikerssleutel`,appToken:`App-token`,priority:`Prioriteit`,pushoverRetry:`Noodherhaling (s)`,pushoverExpire:`Noodverval (s)`,botToken:`Bottoken`,chatId:`Chat-ID`,telegramThreadId:`Forumtopic-ID`,telegramThreadIdHelp:`Optioneel. Plaatst in één specifiek topic van een forumgroep — het laatste nummer in de topiclink (t.me/c/.../25). Laat leeg voor het algemene topic.`,telegramThreadIdInvalid:`Forumtopic-ID moet een getal zijn.`,smtpServer:`SMTP-server`,smtpPort:`SMTP-poort`,security:`Beveiliging`,authentication:`Authenticatie`,username:`Gebruikersnaam`,password:`Wachtwoord`,fromEmail:`Afzender-e-mail`,toEmail:`Naar e-mailadres`,webhookUrl:`Webhook-URL`,payloadFormat:`Payloadformaat`,authorization:`Autorisatie`,titleFieldName:`Naam titelveld`,messageFieldName:`Naam berichtveld`,editTemplate:`Sjabloon bewerken: {{name}}`,titleLabel:`Titel`,bodyLabel:`Inhoud`,titlePlaceholder:`Meldingstitel...`,bodyPlaceholder:`Meldingsinhoud...`,availableVariables:`Beschikbare variabelen`,clickToInsert:`Klik om op de cursorpositie in de inhoud in te voegen`,livePreview:`Livevoorbeeld`,hide:`Verbergen`,show:`Tonen`,loadingPreview:`Voorbeeld laden...`,enterTemplateContent:`Voer sjablooninhoud in om een voorbeeld te zien`,titlePreview:`Titel:`,bodyPreview:`Inhoud:`,resetToDefault:`Terugzetten naar standaard`,titleRequired:`Titel is verplicht`,bodyRequired:`Inhoud is verplicht`,notificationLog:`Meldingslogboek`,showFailedOnly:`Alleen mislukt`,last24Hours:`Laatste 24 uur`,last7Days:`Laatste 7 dagen`,last30Days:`Laatste 30 dagen`,last90Days:`Laatste 90 dagen`,justNow:`Zojuist`,noFailedNotifications:`Geen mislukte meldingen`,noNotificationsLogged:`Geen meldingen geregistreerd`,unknownProvider:`Onbekende provider`,logTitle:`Titel`,logMessage:`Bericht`,logError:`Fout`,logProvider:`Provider: {{type}}`,logTime:`Tijd: {{time}}`,refresh:`Vernieuwen`,clearOld:`Oude wissen`,statsSummary:`Laatste {{days}} dagen:`,statsNotifications:`meldingen`,statsSent:`{{count}} verzonden`,statsFailed:`{{count}} mislukt`,eventTypes:{print_start:`Afdruk gestart`,print_complete:`Afdruk voltooid`,print_failed:`Afdruk mislukt`,print_stopped:`Afdruk gestopt`,print_progress:`Voortgang`,printer_offline:`Printer offline`,printer_error:`Printerfout`,filament_low:`Weinig filament`,maintenance_due:`Onderhoud nodig`,test:`Testen`},userEmail:{title:`Meldingen`,emailNotifications:`E-mailmeldingen`,emailNotificationsDesc:`Ontvang e-mailmeldingen voor je eigen afdruktaken. E-mails worden verzonden via de SMTP-instellingen van het systeem die zijn geconfigureerd onder Geavanceerde authenticatie.`,sendingTo:`Meldingen worden verzonden naar`,noEmailWarning:`Je account heeft geen e-mailadres. Neem contact op met een beheerder om er een toe te voegen.`,printJobNotifications:`Meldingen voor afdruktaken`,printJobNotificationsDesc:`Kies welke gebeurtenissen e-mailmeldingen activeren voor afdruktaken die je indient.`,printJobStarts:`Afdruktaak start`,printJobStartsDesc:`Ontvang een melding wanneer je afdruktaak begint.`,printJobFinishes:`Afdruktaak voltooid`,printJobFinishesDesc:`Ontvang een melding wanneer je afdruktaak succesvol is voltooid.`,printErrors:`Afdrukfouten`,printErrorsDesc:`Ontvang een melding wanneer je afdruktaak mislukt of een fout tegenkomt.`,printJobStops:`Afdruktaak gestopt`,printJobStopsDesc:`Ontvang een melding wanneer je afdruktaak wordt geannuleerd of gestopt.`,saveSuccess:`Meldingsvoorkeuren opgeslagen.`,saveError:`Meldingsvoorkeuren opslaan mislukt.`}},richTextEditor:{bold:`Vet`,italic:`Cursief`,underline:`Onderstrepen`,bulletList:`Opsomming`,numberedList:`Genummerde lijst`,alignLeft:`Links uitlijnen`,alignCenter:`Centreren`,alignRight:`Rechts uitlijnen`,addLink:`Link toevoegen`,removeLink:`Link verwijderen`},externalLinks:{title:`Zijbalklinks`,sidebarLayout:`Zijbalk`,sidebarLayoutDescription:`Toon of verberg ingebouwde pagina's, voeg externe links toe en sleep items om de navigatie in de zijbalk te herschikken.`,systemPages:`Bambuddy-pagina's`,externalLinks:`Externe links`,visibleInSidebar:`Zichtbaar in zijbalk`,hiddenFromSidebar:`Verborgen in zijbalk`,requiredInSidebar:`Verplicht in zijbalk`,hidePage:`Pagina verbergen`,showPage:`Pagina tonen`,settingsCannotBeHidden:`Instellingen kunnen niet worden verborgen`,noLinksConfigured:`Geen externe links geconfigureerd`,deleteLink:`Link verwijderen`,removeCustomIcon:`Aangepast pictogram verwijderen`,openInNewTab:`Openen in nieuw tabblad`,placeholders:{linkName:`Mijn link`}},keyboardShortcuts:{title:`Sneltoetsen`,navigation:`Navigatie`,archivesSection:`Archieven`,kProfilesSection:`K-profielen`,generalSection:`Algemeen`,shortcuts:{goToPrinters:`Ga naar Printers`,goToArchives:`Ga naar Archieven`,goToQueue:`Ga naar Wachtrij`,goToStats:`Ga naar Statistieken`,goToProfiles:`Ga naar Cloudprofielen`,goToSettings:`Ga naar Instellingen`,focusSearch:`Zoeken activeren`,openUploadModal:`Uploadvenster openen`,clearSelection:`Selectie wissen / invoerveld verlaten`,contextMenu:`Contextmenu op kaarten`,refreshProfiles:`Profielen vernieuwen`,newProfile:`Nieuw profiel`,exitSelectionMode:`Selectiemodus afsluiten`,showHelp:`Deze hulp tonen`},footer:`Druk op Esc of klik buiten het venster om te sluiten`},notificationLog:{title:`Meldingslogboek`,events:{printStarted:`Afdruk gestart`,printComplete:`Afdruk voltooid`,printFailed:`Afdruk mislukt`,printStopped:`Afdruk gestopt`,progress:`Voortgang`,printerOffline:`Printer offline`,printerError:`Printerfout`,lowFilament:`Weinig filament`,maintenanceDue:`Onderhoud nodig`,test:`Testen`},timeAgo:{justNow:`Zojuist`,minutesAgo:`{{minutes}}m geleden`,hoursAgo:`{{hours}}u geleden`}},restoreBackup:{title:`Back-up herstellen`,restoring:`Herstellen...`,restoreComplete:`Herstel voltooid`,restoreFailed:`Herstel mislukt`,importSettings:`Instellingen importeren uit een back-upbestand`,pleaseWait:`Wacht terwijl je gegevens worden hersteld`,clickToSelect:`Klik om een back-upbestand te selecteren (.json of .zip)`,howDuplicateHandling:`Zo werkt afhandeling van duplicaten:`,categories:{printers:`Printers`,smartPlugs:`Slimme stekkers`,notificationProviders:`Meldingsproviders`,filaments:`Filamenten`,archives:`Archieven`,pendingUploads:`Openstaande uploads`,settingsTemplates:`Instellingen en sjablonen`},matchingInfo:{printers:`gekoppeld op serienummer`,smartPlugs:`gekoppeld op IP-adres`,notificationProviders:`gekoppeld op naam`,filaments:`gekoppeld op naam + type + merk`,archives:`overeenkomst op inhoudshash`,pendingUploads:`gekoppeld op bestandsnaam`,settingsTemplates:`altijd overschreven`},replaceExisting:`Bestaande gegevens vervangen`,keepExisting:`Bestaande gegevens behouden`,replaceDescription:`Items die al bestaan overschrijven met gegevens uit de back-up`,keepDescription:`Alleen items herstellen die nog niet bestaan`,caution:`Let op:`,cautionText:`Overschrijven vervangt je huidige configuraties door de back-upgegevens. Toegangscodes van printers worden om veiligheidsredenen nooit overschreven.`,itemsRestored:`Items hersteld`,itemsSkipped:`Items overgeslagen`,restored:`Hersteld`,skipped:`Overgeslagen (bestaan al)`,filesLabel:`Bestanden (3MF, miniaturen, enz.)`,newApiKeysGenerated:`Nieuwe API-sleutels gegenereerd`,newApiKeysWarning:`Deze sleutels worden maar één keer getoond. Kopieer ze nu!`,processingBackup:`Back-upbestand verwerken...`,noDataFound:`Er zijn geen gegevens gevonden om uit het back-upbestand te herstellen.`,failedToRestore:`Back-up herstellen mislukt. Controleer het bestandsformaat.`},backupExport:{title:`Back-up exporteren`,selectData:`Selecteer gegevens om op te nemen`,selectAll:`Alles selecteren`,selectNone:`Niets selecteren`,categoryDescriptions:{settings:`Taal, thema, updatevoorkeuren`,notifications:`ntfy, Pushover, Discord, enz.`,templates:`Aangepaste berichtsjablonen`,smartPlugs:`Tasmota-stekkerconfiguraties`,externalLinks:`Zijbalklinks naar externe services`,printers:`Printerinformatie (toegangscodes uitgesloten)`,plateDetection:`Referentieafbeeldingen van lege plaat`,filaments:`Filamenttypen en kosten`,maintenance:`Aangepaste onderhoudsschema's`,archives:`Alle afdrukgegevens + bestanden (3MF, miniaturen, foto's)`,projects:`Projecten, BOM-items en bijlagen`,pendingUploads:`Uploads van virtuele printer die op beoordeling wachten`,apiKeys:`Webhook-API-sleutels (nieuwe sleutels worden gegenereerd bij import)`},requiresPrinters:`Vereist dat Printers is geselecteerd`,zipFileWarning:`Er wordt een ZIP-bestand aangemaakt.`,zipFileDescription:`Bevat alle 3MF-bestanden, miniaturen, timelapses en foto's. Dit kan enige tijd duren en een groot bestand opleveren.`,includeAccessCodes:`Toegangscodes opnemen`,includeAccessCodesDescription:`Voor overdracht naar een andere machine`,includeAccessCodesWarning:`Toegangscodes worden als platte tekst opgenomen. Bewaar dit back-upbestand veilig!`,categoriesSelected:`{{selectedCount}} categorieën geselecteerd`},pendingUploads:{placeholders:{notes:`Voeg notities over deze afdruk toe...`},discardUpload:`Upload verwijderen`,archiveAllUploads:`Alle uploads archiveren`,discardAllUploads:`Alle uploads verwijderen`,archive:`Archief`,timeAgo:{justNow:`Zojuist`,minutesAgo:`{{minutes}}m geleden`,hoursAgo:`{{hours}}u geleden`,daysAgo:`{{days}}d geleden`}},apiBrowser:{placeholders:{requestBody:`JSON-requestbody...`,searchEndpoints:`Endpoints zoeken...`}},configureAmsSlot:{title:`AMS-slot configureren`,slotConfigured:`Slot geconfigureerd!`,configuringSlot:`Slot configureren:`,slotLabel:`{{ams}} Slot {{slot}}`,searchPresets:`Presets zoeken...`,colorPlaceholder:`Kleurnaam of hex (bijv. brown, FF8800)`,clearCustomColor:`Aangepaste kleur wissen`,noCloudPresets:`Geen cloudpresets. Meld je aan bij Bambu Cloud om te synchroniseren.`,noPresetsAvailable:`Geen presets beschikbaar. Meld je aan bij Bambu Cloud of importeer lokale profielen.`,noMatchingPresets:`Geen overeenkomende presets gevonden.`,custom:`Aangepast`,builtin:`Ingebouwd`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Instellingen naar printer verzonden`,filamentProfile:`Filamentprofiel`,kProfileLabel:`K-profiel (Pressure Advance)`,filteringFor:`Filteren op: {{material}}`,noKProfile:`Geen K-profiel (gebruik standaard 0.020)`,noMatchingKProfiles:`Geen overeenkomende K-profielen gevonden. Standaard K=0.020 wordt gebruikt.`,otherKProfiles:`Andere K-profielen op deze printer`,selectFilamentFirst:`Selecteer eerst een filamentprofiel`,kFromCalibration:`K={{value}} uit printerkalibratie`,customColorLabel:`Aangepaste kleur (optioneel)`,presetColors:`{{name}} kleuren:`,showLessColors:`Minder kleuren tonen`,showMoreColors:`Meer kleuren tonen`,clear:`Wissen`,hexLabel:`Hex: #{{hex}}`,resetting:`Resetten...`,resetSlot:`Slot resetten`,cancel:`Annuleren`,configuring:`Configureren...`,configureSlot:`Sleuf configureren`},githubBackup:{title:`Git-back-up`,history:`Geschiedenis`,downloadBackup:`Back-up downloaden`,restoreBackup:`Back-up herstellen`,noBackupsYet:`Nog geen back-ups`},emailSettings:{placeholders:{fromName:`BamBuddy`}},tagManagement:{searchTags:`Tags zoeken...`,renameTag:`Tag hernoemen`,deleteTag:`Tag verwijderen`},notificationTemplates:{placeholders:{title:`Meldingstitel...`,body:`Meldingsinhoud...`}},batchTag:{placeholders:{newTag:`Nieuwe tag invoeren...`}},photoGallery:{deletePhoto:`Foto verwijderen`},filamentHoverCard:{copySpoolUuid:`Spoel-UUID kopiëren`},kProfilesView:{hasNote:`Heeft notitie`,copyProfile:`Profiel kopiëren`},layout:{openMenu:`Menu openen`,noPermissionSystemInfo:`Je hebt geen machtiging om systeeminformatie te bekijken`},dashboard:{dragToReorder:`Sleep om te herschikken`,hideWidget:`Widget verbergen`},notificationProviderCard:{deleteNotificationProvider:`Meldingsprovider verwijderen`},fileManagerModal:{closeFileManager:`Bestandsbeheer sluiten`,sortFiles:`Bestanden sorteren`,goToParentFolder:`Ga naar bovenliggende map`,threeView:`3D-weergave`},embeddedCameraViewer:{refreshStream:`Stream vernieuwen`,close:`Sluiten`,zoomOut:`Uitzoomen`,resetZoom:`Zoom resetten`,zoomIn:`Inzoomen`,dragToResize:`Sleep om formaat te wijzigen`},timelapseViewer:{skipBack5s:`5 sec terug`,skipForward5s:`5 sec vooruit`},notificationProviders:{descriptions:{email:`SMTP-e-mailmeldingen`,telegram:`Meldingen via Telegram-bot`,discord:`Versturen naar Discord-kanaal via webhook`,ntfy:`Gratis, zelf te hosten pushmeldingen`,pushover:`Eenvoudige, betrouwbare pushmeldingen`,callmebot:`Gratis WhatsApp-meldingen via CallMeBot`,webhook:`Algemene HTTP POST naar elke URL`}},logViewer:{searchPlaceholder:`Zoek bericht of loggernaam...`,noLogEntries:`Geen logboekitems gevonden`},switchbarPopover:{noSwitchesInSwitchbar:`Geen schakelaars in de schakelbalk`},projectPageModal:{placeholders:{title:`Titel`,designer:`Ontwerper`,license:`Licentie`,description:`Voer beschrijving in...`,profileTitle:`Profieltitel`,profileDescription:`Profielbeschrijving...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`Wachten`,justNow:`Zojuist`,now:`Nu`,minsAgo:`{{count}}m geleden`,inMins:`over {{count}}m`,hoursAgo:`{{count}}u geleden`,inHours:`over {{count}}u`,daysAgo:`{{count}}d geleden`,inDays:`over {{count}}d`},spoolbuddy:{nav:{dashboard:`Dashboard`,ams:`AMS`,inventory:`Voorraad`,writeTag:`Schrijven`,settings:`Instellingen`},status:{nfcReady:`NFC gereed`,nfcOff:`NFC uit`,offline:`Offline`,online:`Online`,noPrinters:`Geen printers`,deviceOffline:`Apparaat offline`,waitingConnection:`Wachten op apparaatverbinding...`,systemReady:`Systeem gereed`,status:`Status`},dashboard:{readyToScan:`Gereed om te scannen`,idleMessage:`Plaats een spoel op de weegschaal om deze te identificeren`,nfcHint:`NFC-tag wordt automatisch gelezen`,device:`Apparaat`,syncWeight:`Gewicht synchroniseren`,weightSynced:`Gesynchroniseerd!`,unknownTag:`Onbekende tag`,newTag:`Nieuwe tag gedetecteerd`,onScale:`op weegschaal`,linkSpool:`Koppelen aan spoel`,linkTagTitle:`Tag aan spoel koppelen`,linkTag:`Tag koppelen`,selectSpool:`Selecteer een spoel om deze tag aan te koppelen:`,noUntagged:`Geen spoelen zonder tags gevonden`,tagDetected:`Tag gedetecteerd`,noTag:`Geen tag`,tagId:`Tag`,grossWeight:`Brutogewicht`,spoolSize:`Spoelgrootte`,close:`Sluiten`,currentSpool:`Huidige spoel`,plateReady:`Plaat gereed: {{name}}`,plateReadyLabel:`Platen gereed om vrij te geven`,plateClearAction:`Wissen`,plateClearedToast:`Plaat gemarkeerd als vrij`,plateClearFailed:`Plaat kon niet als vrij worden gemarkeerd`},modal:{spoolDetected:`Spoel gedetecteerd`,assignToAms:`Aan AMS toewijzen`,syncWeight:`Gewicht synchroniseren`,weightSynced:`Gesynchroniseerd!`,syncing:`Synchroniseren...`,newTagDetected:`Nieuwe tag gedetecteerd`,addToInventory:`Aan voorraad toevoegen`,assignToAmsTitle:`Aan AMS toewijzen`,selectSlot:`Selecteer een slot`,assign:`Toewijzen`,assigning:`Toewijzen...`,assignSuccess:`Toegewezen!`,assignPendingInsert:`Toegewezen. Sleuf wordt geconfigureerd zodra je de spoel plaatst.`,assignError:`Spoel toewijzen mislukt. Probeer het opnieuw.`,noPrinterSelected:`Selecteer een printer...`,noAmsDetected:`Geen AMS gedetecteerd op deze printer`,slot:`Sleuf`},weight:{noReading:`Geen meting`,stable:`Stabiel`,measuring:`Meten...`,tare:`Tarreren`,calibrate:`Kalibreren`},spool:{remaining:`Resterend`,material:`Materiaal`,brand:`Merk`,color:`Kleur`,coreWeight:`Kern`,labelWeight:`Label`,scaleWeight:`Weegschaal`,netWeight:`Netto`,lastUsed:`Laatst gebruikt`,unknownColor:`Onbekende kleur`},ams:{noData:`Geen AMS gedetecteerd`,connectAms:`Sluit een AMS aan om filamentslots te zien`,noPrinter:`Geen printer geselecteerd`,selectPrinter:`Selecteer een printer in de bovenste balk`,printerDisconnected:`Printer niet verbonden`,humidity:`Luchtvochtigheid`,level:`Niveau`,active:`Actief`,slot:`Sleuf`,empty:`Leeg`},inventory:{search:`Spoelen zoeken...`,empty:`Geen spoelen in voorraad`,noResults:`Geen overeenkomende spoelen`,spools:`spoelen`,addSpool:`Spoel toevoegen`},settings:{tabDevice:`Apparaat`,tabDisplay:`Weergave`,tabScale:`Weegschaal`,tabUpdates:`Updates`,nfcReader:`NFC-lezer`,type:`Type`,connection:`Verbinding`,notConnected:`N.v.t.`,deviceInfo:`Apparaatinformatie`,hostname:`Host`,uptime:`Uptime`,systemConfig:`Backend & authenticatie`,backendUrl:`Bambuddy-backend-URL`,apiToken:`API-token`,apiTokenPlaceholder:`Voer API-token in`,saveConfig:`Configuratie opslaan`,systemQueued:`Configuratie in wachtrij geplaatst.`,nfcDiagnostic:`NFC-diagnose`,scaleDiagnostic:`Weegschaaldiagnose`,readTagDiagnostic:`Tagleesdiagnose`,testNfc:`Lezer testen`,testScale:`Nauwkeurigheid testen`,testReadTag:`Tag lezen`,systemFieldsRequired:`Backend-URL is verplicht.`,brightness:`Helderheid`,saved:`Opgeslagen`,noBacklight:`Geen DSI-achtergrondverlichting gedetecteerd. Helderheidsregeling vereist een DSI-display.`,screenBlank:`Time-out schermuitschakeling`,screenBlankDesc:`Scherm schakelt uit na inactiviteit. Raak aan om te activeren.`,displayNote:`Helderheid wordt toegepast als softwarefilter.`,scaleCalibration:`Weegschaalkalibratie`,currentWeight:`Huidig gewicht`,tareOffset:`Tarreren`,calFactor:`Factor`,knownWeight:`Bekend gewicht`,calStep1:`Verwijder alle items van de weegschaal en druk op Nulpunt instellen.`,calStep2:`Plaats een bekend gewicht op de weegschaal.`,setZero:`Nulpunt instellen`,calibrateNow:`Kalibreren`,calibrated:`Gekalibreerd`,tareSet:`Tareeropdracht verzonden. Wachten op apparaat...`,tareComplete:`Tarreren voltooid!`,tareTimedOut:`Time-out bij tarreren — draait de SpoolBuddy-daemon?`,tareFailed:`Tareeropdracht verzenden mislukt`,zeroSet:`Nulpunt ingesteld. Plaats een bekend gewicht op de weegschaal.`,calibrationDone:`Kalibratie voltooid!`,calibrationFailed:`Kalibratie mislukt`,lastCalibrated:`Laatst gekalibreerd`,stable:`Stabiel`,settling:`Stabiliseren...`,firmware:`Firmware`,scale:`Weegschaal`,noDevice:`Geen SpoolBuddy-apparaat gevonden`,daemonVersion:`Daemonversie`,currentVersion:`Huidig`,versionPending:`Wachten op daemon...`,checking:`Controleren...`,checkUpdates:`Controleren op updates`,updateAvailable:`Update beschikbaar`,updateInstructions:`Bijwerken via SSH: voer het SpoolBuddy-installatiescript uit om te upgraden.`,upToDate:`Up-to-date`,includeBeta:`Bètaversies opnemen`},writeTag:{tabExisting:`Bestaande spoel`,tabNew:`Nieuwe spoel`,tabReplace:`Tag vervangen`,searchPlaceholder:`Zoeken op materiaal, kleur, merk...`,noUntaggedSpools:`Geen spoelen zonder tags`,noTaggedSpools:`Geen spoelen met tags`,selectSpool:`Selecteer een spoel en plaats daarna een lege NTAG op de lezer`,placeTag:`Plaats een NTAG op de lezer`,tagReady:`Tag gedetecteerd — gereed om te schrijven`,writeTag:`Tag schrijven`,replaceTag:`Tag vervangen`,writing:`Tag schrijven...`,waiting:`Wachten op SpoolBuddy...`,writeSuccess:`Tag succesvol geschreven!`,writeFailed:`Schrijven mislukt`,queueFailed:`Schrijfopdracht in wachtrij plaatsen mislukt`,tryAgain:`Opnieuw proberen`,cancel:`Annuleren`,replaceWarning:`Oude tag wordt ontkoppeld. Nieuwe tag vervangt deze.`,deviceOffline:`SpoolBuddy is offline`,material:`Materiaal`,colorName:`Kleurnaam`,color:`Kleur`,brand:`Merk`,weight:`Gewicht (g)`,createSpool:`Spoel aanmaken`,creating:`Maken...`,spoolCreated:`Spoel aangemaakt! Gereed om te schrijven.`,createFailed:`Spoel aanmaken mislukt`,incompleteDataWarning:`Tag geschreven met onvolledige Spoolman-gegevens`},quickMenu:{printerPower:`Printervoeding`,systemControls:`Systeem`,restartDaemon:`Daemon herstarten`,restartBrowser:`Browser herstarten`,reboot:`Opnieuw opstarten`,shutdown:`Afsluiten`,swipeToClose:`Veeg omlaag om te sluiten`,confirmTitle:`Bevestigen`,confirmShutdown:`Weet je zeker dat je SpoolBuddy wilt uitschakelen? Je hebt fysieke toegang nodig om hem weer in te schakelen.`,confirmReboot:`Weet je zeker dat je SpoolBuddy opnieuw wilt opstarten?`,confirmRestartDaemon:`SpoolBuddy-daemon opnieuw starten? NFC en de weegschaal zijn tijdelijk niet beschikbaar.`,confirmRestartBrowser:`Kioskbrowser opnieuw starten? Het scherm wordt kort zwart.`,confirm:`Bevestigen`,confirmPlugOn:`{{name}} inschakelen?`,confirmPlugOff:`{{name}} uitschakelen?`,turnOn:`Inschakelen`,turnOff:`Uitschakelen`}},diagnostic:{modalTitle:`Verbindingsdiagnose — {{name}}`,running:`Diagnose uitvoeren...`,runningElapsed:`Diagnose uitvoeren... ({{elapsed}}s)`,waitingForReportHint:`Wachten totdat de printer een statusrapport publiceert — dit kan maximaal {{max}} seconden duren.`,runFailed:`Diagnose kon niet worden uitgevoerd: {{error}}`,retry:`Opnieuw uitvoeren`,runButton:`Diagnose uitvoeren`,sectionTitle:`Verbindingsdiagnose`,sectionDescription:`Controleer waarom een printer geen verbinding maakt of niet afdrukt — bereikbaarheid van poorten, LAN Developer Mode, Docker-netwerkmodus en inloggegevens.`,noPrinters:`Geen printers geconfigureerd.`,overall:{ok:`Geen problemen gevonden — de printerverbinding ziet er gezond uit.`,warnings:`De printer zou moeten werken, maar sommige punten vereisen aandacht.`,problems:`Problemen gevonden die verklaren waarom de printer geen verbinding maakt of niet afdrukt.`},check:{port_mqtt:{title:`Besturingspoort (MQTT 8883)`,pass:`Bereikbaar — de printer accepteert besturingsverbindingen.`,fail:`Poort 8883 is niet bereikbaar. De printer is uitgeschakeld, heeft een ander IP-adres of een firewall blokkeert de poort. Controleer het IP-adres van de printer en of niets poort 8883 blokkeert.`},port_ftps:{title:`Bestandsoverdrachtpoort (FTPS 990)`,pass:`Bereikbaar — het verzenden van afdrukbestanden werkt.`,warn:`Poort 990 is niet bereikbaar. Monitoring kan nog werken, maar het verzenden van afdrukken naar de printer mislukt. Zorg dat poort 990 niet wordt geblokkeerd.`,warn_no_tls:`Poort 990 is open, maar de bestandsservice van de printer voltooit geen TLS-handshake. Afdrukbestanden, covers en timelapses kunnen niet worden opgehaald, waardoor archieven leeg blijven. Start de printer opnieuw — alleen de poort vrijgeven helpt niet.`},external_storage:{title:`Verzonden bestanden op externe opslag bewaren (installatiestap 4)`,pass:`De printer meldt dat deze optie aanstaat — verzonden bestanden worden op de SD-kaart opgeslagen en archieven bevatten miniaturen en slicermetadata.`,fail:`De printer meldt dat deze optie uitstaat. Schakel "Verzonden bestanden op externe opslag bewaren" in — op nieuwere firmware (P2S 01.02 / Bambu Studio 2.6+) staat de schakelaar in de Afdrukinstellingen van de printer; op oudere versies in het tabblad Apparaat van Bambu Studio / OrcaSlicer. Zonder deze optie mist elke gearchiveerde afdruk zijn miniatuur en slicermetadata.`,skip:`Niet gecontroleerd — hiervoor is een actieve MQTT-verbinding nodig. Bij oudere slicers, waar deze instelling alleen in de slicer staat, rapporteert de printer hem nooit. Daardoor kan deze controle slagen terwijl de optie uitstaat — controleer installatiestap 4 handmatig.`,skip_unsupported_model:`Dit model heeft een SD-slot maar geen manier om de optie in te schakelen — de huidige P1-seriefirmware toont de schakelaar niet in Bambu Studio en de printer heeft geen scherm. Hier is niets te herstellen; gearchiveerde afdrukken kunnen miniaturen en slicermetadata missen totdat Bambu Lab firmwareondersteuning toevoegt.`,fail_no_media:`De optie staat aan, maar de printer meldt dat er geen kaart of stick in het slot zit, waardoor verzonden bestanden nergens kunnen worden opgeslagen. Plaats er een en druk opnieuw af — tot die tijd mist elke gearchiveerde afdruk zijn miniatuur en slicermetadata.`,warn_internal_storage:`De optie staat aan en opslag is aanwezig, maar de laatste afdruk ging toch naar de interne opslag van de printer, die Bambuddy niet kan lezen. Bij H2-serie, P2S en X2D stuurt de knop Afdrukken van Bambu Studio altijd daarheen, ongeacht deze instelling. Afdrukken worden gearchiveerd met naam en timing, maar zonder miniatuur of slicermetadata. Voor volledige archieven start je afdrukken vanuit Bambuddy of slice je in OrcaSlicer — of gebruik in Bambu Studio Verzenden met Extern geselecteerd en start daarna de afdruk.`,warn_internal_history:`De optie staat aan en er is opslag aanwezig, maar de laatste print liep vanaf een bestand dat al op de printer stond — opnieuw afdrukken via het scherm, starten vanuit Handy, of een eerder verstuurd bestand. Die bibliotheek staat op interne opslag die Bambuddy niet kan lezen, en geen enkele instelling verandert dat, omdat er voor die print niets is verstuurd. Hij wordt nog steeds gearchiveerd met naam en tijden, maar zonder thumbnail of slicer-metadata. Start prints vanuit Bambuddy of verstuur ze vanuit de slicer voor volledige archieven.`},port_rtsps:{title:`Camerapoort ({{protocol}} {{port}})`,pass:`Bereikbaar — de camerastream werkt.`,warn:`Poort {{port}} is niet bereikbaar. De livecamera werkt niet. Dit heeft geen invloed op afdrukken.`},macos_local_network:{title:`macOS-toegang tot lokaal netwerk`,pass:`macOS staat Bambuddy toe het lokale netwerk te bereiken.`,warn_unsigned:`De Python waarmee Bambuddy draait heeft geen codehandtekening, dus macOS heeft niets om de toegang tot het lokale netwerk aan te koppelen en laat elke verbinding met de printer stilletjes vallen — zonder fout en zonder vraag. Voer het updatescript van Bambuddy (install/update_macos.sh) uit, dat de handtekening plaatst, en start Bambuddy daarna opnieuw. Interpreter: {{executable}}`,warn_permission:`Staat de printer aan en is hij op dit adres bereikbaar, open dan Systeeminstellingen > Privacy en beveiliging > Lokaal netwerk en controleer of de Python van Bambuddy is ingeschakeld. Zo niet, dan laat macOS lokale verbindingen stilletjes vallen, en een Python-update kan de oude toestemming achterlaten.`},network_mode:{title:`Netwerkmodus van de container`,genericRuntime:`een container`,pass:`Draait in {{runtime}} met host-netwerk.`,warn:`Bambuddy draait in {{runtime}} met bridge-netwerken. Printerdetectie en de Virtuele printer vereisen host-netwerk — maak de container opnieuw aan met host-netwerk ("network_mode: host" in docker-compose, "--network=host" bij Podman).`,skip:`Draait niet in een container — niet van toepassing.`,skip_unknown:`Bambuddy draait in {{runtime}}, maar de netwerkmodus kon niet worden bepaald. Als printerdetectie of de Virtuele printer niet werken, maak de container dan opnieuw aan met host-netwerk.`,skip_system_container:`Bambuddy draait in een {{runtime}}-systeemcontainer, die net als een virtuele machine op het LAN zit — niet van toepassing.`},subnet:{title:`Netwerksubnet`,pass:`De printer en Bambuddy bevinden zich op hetzelfde subnet.`,warn:`De printer ({{printer_ip}}) en Bambuddy ({{host_ip}}) bevinden zich op verschillende subnetten. Ze kunnen elkaar mogelijk niet bereiken tenzij routing tussen de subnetten is geconfigureerd.`,skip:`Subnet kon niet worden bepaald — overgeslagen.`},mqtt_auth:{title:`Printerinloggegevens`,pass:`De printer heeft de verbinding geaccepteerd.`,fail:`De printer is bereikbaar, maar Bambuddy is er niet mee verbonden. De toegangscode of het serienummer is waarschijnlijk onjuist — de toegangscode verandert telkens wanneer LAN Only of Developer Mode wordt omgeschakeld, dus kopieer hem opnieuw vanaf het printerscherm. Een printer die opnieuw opstart of het maximumaantal gelijktijdige verbindingen heeft bereikt, kan hetzelfde gedrag vertonen.`,fail_auth_rejected:`De printer heeft de inloggegevens van Bambuddy geweigerd. De toegangscode of het serienummer is onjuist — de toegangscode verandert telkens wanneer LAN Only of Developer Mode wordt omgeschakeld, dus kopieer hem opnieuw vanaf het printerscherm en sla hem op in de printerinstellingen.`,skip:`Niet gecontroleerd — de printer kon niet worden bereikt.`},developer_mode:{title:`LAN Developer Mode`,pass:`Developer Mode is ingeschakeld.`,fail:`Developer Mode staat UIT op de printer. Schakel deze in bij de LAN-instellingen van de printer — en bevestig met OK. Zonder deze modus starten afdrukken niet.`,skip:`Kon niet worden gecontroleerd — vereist een actieve verbinding met de printer.`},printer_publishing:{title:`Printer publiceert status`,pass:`De printer publiceert statusupdates — AMS, filamenten en K-profielen worden correct naar de slicer gespiegeld.`,fail:`De MQTT-broker heeft de verbinding geaccepteerd, maar de printer heeft geen statusrapporten gepubliceerd. Dit wordt bijna altijd veroorzaakt door een verkeerd of anders geschreven serienummer — het topic device/<serial>/report is hoofdlettergevoelig. Controleer het serienummer in de printerinstellingen opnieuw aan de hand van het printerscherm.`,skip:`Kon niet worden gecontroleerd — vereist een actieve verbinding met de printer.`}}},systemHealth:{sectionTitle:`Systeemgezondheid`,sectionDescription:`Scant recente logs op bekende problemen die je meestal zelf kunt oplossen voordat ze een supportticket worden.`,rescan:`Opnieuw scannen`,clean:`Geen bekende problemen gevonden in de laatste {{times}} logboekitems.`,logUnavailable:`Bestandslogging is uitgeschakeld, waardoor logs niet kunnen worden gescand. Schakel bestandslogging in om deze controle te gebruiken.`,learnMore:`Hoe op te lossen`,fixLabel:`Oplossing:`,occurrences:`{{times}}× gezien — laatst om {{lastSeen}}`,category:{layer8:`Dit kun je zelf oplossen`,environment:`Omgeving`,bug:`Meld dit probleem`},signature:{"ftp-auth-rejected":{name:`Printer heeft toegangscode geweigerd`,cause:`De printer heeft de login voor bestandsoverdracht geweigerd. De toegangscode is onjuist of gewijzigd nadat Developer Mode werd omgeschakeld.`,fix:`Kopieer de toegangscode opnieuw vanaf het printerscherm (LAN-instellingen) en werk deze bij in de printerinstellingen van Bambuddy.`},"ftp-connection-timeout":{name:`Time-out bij bestandsoverdrachtverbinding`,cause:`Bambuddy kon de bestandsoverdrachtpoort van de printer (FTPS 990) niet bereiken. De poort is geblokkeerd, de printer staat uit of bevindt zich op een ander subnet.`,fix:`Zorg dat niets poort 990 tussen Bambuddy en de printer blokkeert en dat beide zich op hetzelfde netwerk bevinden.`},"ftp-ssl-error":{name:`Beveiligde bestandsoverdracht-handshake mislukt`,cause:`De bestandsservice van de printer reageerde op poort 990 zonder TLS. De bestandsserver is vastgelopen — een printerprobleem, geen firewall- of firmwareprobleem.`,fix:`Start de printer opnieuw. Tot die tijd kunnen afdrukbestanden, covers en timelapses niet worden opgehaald; afdrukken zelf wordt niet beïnvloed.`},"bambu-cloud-captcha":{name:`Bambu Cloud vraagt om een CAPTCHA`,cause:`De anti-misbruiklaag van Bambu geeft dit netwerk een challenge, waardoor aanmelden bij Bambu Cloud niet kan worden voltooid. Dit is gekoppeld aan het openbare IP-adres, niet aan je account of deze installatie.`,fix:`Wacht — dit verdwijnt normaal binnen enkele uren en herhaald aanmelden verlengt het probleem. Om ondertussen verbinding te maken kun je aanmelden met een toegangstoken uit een browsersessie.`},"mqtt-connection-flapping":{name:`Printerverbinding blijft wegvallen`,cause:`De besturingsverbinding (MQTT 8883) verbreekt en herstelt herhaaldelijk — meestal door een zwakke netwerkverbinding of een gedeeltelijk geblokkeerde poort.`,fix:`Controleer het wifi-signaal bij de printer, gebruik bij voorkeur een bekabelde verbinding en zorg dat poort 8883 betrouwbaar bereikbaar is.`},"camera-connection-refused":{name:`Camerastream niet bereikbaar`,cause:`De livecamera kon niet worden bereikt op RTSPS-poort 322. De poort is geblokkeerd of de camera/LAN-liveweergave staat uit op de printer.`,fix:`Schakel de camera en LAN-liveweergave op de printer in en zorg dat poort 322 niet wordt geblokkeerd. Dit heeft geen invloed op afdrukken.`},"database-locked":{name:`Database-schrijfconflict`,cause:`De SQLite-database krijgt onder belasting fouten met "database is locked" — dit komt vaak voor wanneer meerdere printers tegelijk worden gebruikt.`,fix:`Schakel Bambuddy over naar een externe PostgreSQL-database. Zie de PostgreSQL-handleiding in de documentatie.`}}},vpDiagnostic:{title:`Installatiecontrole — {{name}}`,runButton:`Installatiecontrole uitvoeren`,running:`Installatiecontrole uitvoeren...`,runFailed:`Installatiecontrole kon niet worden uitgevoerd: {{error}}`,retry:`Opnieuw uitvoeren`,overall:{ok:`Alle controles geslaagd — deze virtuele printer is correct ingesteld.`,warnings:`De virtuele printer zou moeten werken, maar sommige punten vereisen aandacht.`,problems:`Problemen gevonden die verklaren waarom de slicer deze virtuele printer niet kan zien of gebruiken.`},check:{enabled:{title:`Virtuele printer ingeschakeld`,fail:`Deze virtuele printer is uitgeschakeld. Zet hem aan om hem detecteerbaar te maken.`},running:{title:`Services actief`,fail:`De virtuele printer is ingeschakeld, maar de services draaien niet. Controleer het Bambuddy-logboek — een bind-IP-conflict of machtigingsfout voorkomt meestal dat ze starten.`},bind_interface:{title:`Netwerkinterface koppelen`,fail:`De bind-interface is niet ingesteld of bestaat niet meer op deze host. Kies een huidige interface in de keuzelijst Bind-interface.`},access_code:{title:`Toegangscode ingesteld`,fail:`Er is geen toegangscode ingesteld. De slicer moet dezelfde toegangscode van 8 tekens krijgen die je hier instelt.`},target_printer:{title:`Doelprinter`,fail:`Er is geen doelprinter geselecteerd. Proxymodus heeft een echte printer nodig om naar door te sturen.`,warn:`De doelprinter is momenteel offline — proxyverkeer wordt hervat zodra hij opnieuw verbinding maakt.`},port_ftps:{title:`Bestandsuploadservice (poort {{port}})`,fail:`Niets luistert op poort {{port}} van het bind-IP, waardoor de slicer geen bestanden kan uploaden. Een poortconflict op deze interface is de gebruikelijke oorzaak.`},port_mqtt:{title:`Besturingsservice (poort {{port}})`,fail:`Niets luistert op poort {{port}} van het bind-IP, waardoor de slicer geen verbinding kan maken of status kan tonen.`},port_bind:{title:`Detectieservice (poort {{port}})`,fail:`Niets luistert op poort {{port}} van het bind-IP, waardoor de detectiehandshake van de slicer mislukt.`},privileged_ports:{title:`Binden aan bevoorrechte poort`,fail:`Poort {{port}} is lager dan 1024 en deze service mag deze niet binden — daarom luistert hierboven niets. Voeg AmbientCapabilities=CAP_NET_BIND_SERVICE toe aan /etc/systemd/system/bambuddy.service en herstart, of voer "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))" uit. Voeg bij Docker cap_add: [NET_BIND_SERVICE] toe.`},certificate:{title:`TLS-certificaat`,pass:`Certificaat gereed. Zorg dat het Bambuddy-CA-certificaat (hierboven) is geïmporteerd in de trust store van je slicer.`,fail:`Het TLS-certificaat voor deze virtuele printer ontbreekt. Controleer of de Bambuddy-datamap beschrijfbaar is.`}}},bugReport:{title:`Bug melden`,description:`Beschrijving`,descriptionPlaceholder:`Wat ging er mis? Beschrijf het probleem...`,email:`E-mail (optioneel)`,emailPlaceholder:`your@email.com`,emailPrivacy:`Als je dit invult, wordt je e-mailadres opgenomen in een ingeklapte sectie van het GitHub-issue zodat de beheerder contact kan opnemen.`,screenshot:`Schermafbeelding`,uploadOrPaste:`Upload, plak of sleep een afbeelding`,dataCollectedSummary:`Welke gegevens worden in het rapport opgenomen?`,dataIncluded:`Opgenomen:`,dataIncludedList:`Appversie, besturingssysteem, architectuur, Python-versie, databasestatistieken (alleen aantallen), printermodellen, aantallen nozzles, firmwareversies, verbindingsstatus, integratiestatus (Spoolman, MQTT, HA), niet-gevoelige instellingen, aantal netwerkinterfaces, Docker-details, dependencyversies.`,dataNeverIncluded:`Nooit opgenomen:`,dataNeverIncludedList:`Printernamen, serienummers, toegangscodes, wachtwoorden, IP-adressen, e-mailadressen, API-sleutels, tokens, webhook-URL's, hostnamen of gebruikersnamen.`,submit:`Verzenden`,startLogging:`Debuglogging starten`,stepEnableLogging:`Debuglogging ingeschakeld`,stepReproduce:`Reproduceer het probleem nu`,stepStopLogging:`Stoppen en rapport verzenden`,stopAndSubmit:`Stoppen en verzenden`,maxDuration:`Stopt automatisch na {{minutes}} min`,stoppingLogs:`Logs verzamelen en verzenden...`,submitting:`Bugrapport verzenden...`,submittingStepConnection:`Printerverbindingscontroles uitvoeren`,submittingStepVirtualPrinters:`Installatiecontroles virtuele printer uitvoeren`,submittingStepLogScan:`Recente logboeken scannen op bekende problemen`,submittingStepSubmit:`Rapport naar GitHub verzenden`,submitSuccess:`Bugrapport succesvol verzonden!`,submitFailed:`Bugrapport verzenden mislukt`,diagnosticChecking:`Printerverbindingen controleren...`,diagnosticHealthy:`Verbindingscontrole geslaagd — geen problemen gevonden met je printers.`,diagnosticSummary:`{{problems}} van {{total}} printers hebben verbindingsproblemen`,diagnosticIntro:`Een of meer printers hebben een verbindingsprobleem dat je probleem kan veroorzaken. Klap hieronder een printer open om de oplossing te zien — dit oplossen kan het probleem verhelpen zonder bugrapport. Je kunt hieronder nog steeds een rapport verzenden.`,logHealthSummary:`Bekende problemen gevonden in je logs`,logHealthIntro:`Recente logs komen overeen met bekende problemen. Bekijk de oplossingen hieronder — dit oplossen kan het probleem verhelpen zonder bugrapport. Je kunt hieronder nog steeds een rapport verzenden.`,thankYou:`Bedankt!`,submitted:`Je bugrapport is verzonden.`,viewIssue:`Issue bekijken`,closeKeepsRecording:`Je kunt dit paneel sluiten terwijl je het probleem reproduceert — de opname blijft actief en bij opnieuw openen kom je hier terug.`,resumeRecording:`Bugrapportopname — {{elapsed}}. Klik om af te ronden.`,resumeReport:`Rapport hervatten`,unexpectedError:`Er is een onverwachte fout opgetreden`},failureDetection:{title:`AI-foutdetectie`,description:`Bewaak afdrukken met een zelf-gehoste Obico ML API en voer automatisch acties uit bij gedetecteerde fouten.`,mlUrl:`Obico ML API-URL`,mlUrlHint:`Basis-URL van je zelf-gehoste Obico ml_api-container (bijv. http://192.168.1.10:3333).`,mlToken:`ML API-token (optioneel)`,mlTokenPlaceholder:`Laat leeg als de server zonder ML_API_TOKEN draait`,mlTokenHint:`Moet overeenkomen met de omgevingsvariabele ML_API_TOKEN van je Obico ml_api-container. Laat leeg wanneer de container zonder token draait.`,test:`Testen`,testSuccess:`ML API bereikbaar en gezond.`,testSuccessTokenUnknown:`ML API bereikbaar en gezond. Het token kon niet worden gecontroleerd.`,testFailed:`ML API kon niet worden bereikt.`,sensitivity:`Gevoeligheid`,sensitivityLow:`Laag (minder fout-positieven)`,sensitivityMedium:`Gemiddeld (gebalanceerd)`,sensitivityHigh:`Hoog (vroeg detecteren, meer fout-positieven)`,sensitivityHint:`Past de betrouwbaarheidsdrempels aan die waarschuwingen en fouten activeren.`,action:`Actie bij gedetecteerde fout`,actionNotify:`Alleen melden`,actionPause:`Afdruk pauzeren`,actionPauseOff:`Pauzeren en stroom uitschakelen`,pollInterval:`Controle-interval (seconden)`,pollIntervalHint:`Hoe vaak elke printer tijdens het afdrukken wordt gecontroleerd. Minimaal 5s, maximaal 120s.`,externalUrlMissing:`Externe URL is niet ingesteld.`,externalUrlHint:`De ML API haalt de cameramomentopname via een URL op. Stel de Externe URL in bij Algemene instellingen zodat de ML API-container Bambuddy kan bereiken.`,perPrinterTitle:`Bewaakte printers`,perPrinterHint:`Kies welke printers door de detectieservice worden bewaakt.`,monitorAll:`Alle verbonden printers bewaken`,statusTitle:`Status`,serviceRunning:`Service actief`,thresholds:`Lage / hoge drempels`,activePrinters:`Actieve afdrukken`,noActivePrints:`Er worden momenteel geen afdrukken uitgevoerd.`,historyTitle:`Recente detecties`,noHistory:`Nog geen detecties.`},makerworld:{title:`MakerWorld`,description:`Plak een MakerWorld-model-URL om het rechtstreeks vanuit Bambuddy te importeren en af te drukken — zonder naar de Bambu Handy-app te gaan.`,pasteUrlHeader:`Importeren vanuit MakerWorld`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… of plak een MakerWorld-link`,resolveButton:`Ophalen`,signInRequiredTitle:`Aanmelden bij Bambu Cloud vereist om te downloaden`,signInRequiredBody:`Je kunt modeldetails anoniem bekijken, maar MakerWorld vereist een Bambu Cloud-account om 3MF-bestanden te downloaden.`,signInExpiredTitle:`Bambu Cloud-login verlopen`,signInExpiredBody:`Je bent nog aangemeld bij Bambuddy, maar Bambu Lab accepteert het opgeslagen token niet meer, waardoor downloads mislukken. Meld je opnieuw aan bij Bambu Cloud.`,openCloudSettings:`Cloudinstellingen openen`,untitledModel:`Naamloos model`,byCreator:`door {{name}}`,downloadsCount:`{{count}} downloads`,licensePrefix:`Licentie`,alreadyImported:`Al in bibliotheek`,openOnMakerworld:`Openen op MakerWorld`,alreadyInLibrary:`Dit model staat al in je bibliotheek — je vindt het in Bestandsbeheer → MakerWorld`,importSuccess:`{{filename}} geïmporteerd — opgeslagen in Bestandsbeheer → MakerWorld`,platesHeader:`Platen ({{count}})`,plateDefaultName:`Plaat {{n}}`,materialCount:`{{count}} filamenten`,amsRequired:`AMS vereist`,slicedFor:`Gesliced voor {{printer}}`,alsoCompatible:`Ook als compatibel gemarkeerd: {{printers}}`,importToLibrary:`Opslaan`,sliceIn:`Opslaan en slicen in {{slicer}}`,disclaimer:`De MakerWorld-integratie gebruikt door de community gedocumenteerde API-endpoints. Bambuddy is niet verbonden met of goedgekeurd door MakerWorld of Bambu Lab.`,lastImportSuccess:`Geïmporteerd in je bibliotheek`,lastImportAlreadyInLibrary:`Al in je bibliotheek`,viewInLibrary:`Bekijken in Bestandsbeheer`,openInBambuStudio:`Openen in Bambu Studio`,openInOrcaSlicer:`Openen in OrcaSlicer`,importTo:`Importeren in bestandsbeheer`,recentImportsHeader:`Recente imports`,phaseResolving:`Ophalen`,phaseDownloading:`Downloaden`,folderAuto:`MakerWorld (standaard)`,importAll:`Alles importeren`,importAllProgress:`Importeren {{current}}/{{total}}`,openGallery:`Afbeeldingengalerij openen`,galleryPrev:`Vorige afbeelding`,galleryNext:`Volgende afbeelding`,deleteImport:`Uit bibliotheek verwijderen`,importDeleting:`Verwijderen…`,importDeleted:`Uit bibliotheek verwijderd`,confirmDelete:`{{filename}} uit de bibliotheek verwijderen? Hiermee wordt het lokale bestand verwijderd, maar de plaat kan opnieuw vanuit MakerWorld worden geïmporteerd.`,errors:{resolveFailed:`Die MakerWorld-URL kon niet worden opgehaald.`,downloadFailed:`Download mislukt. Probeer het opnieuw.`,deleteFailed:`Bestand kon niet uit de bibliotheek worden verwijderd.`}},gcodeViewer:{filamentSlot:`Filament {{n}}`,loading:`Toolpath lezen…`,loadFailed:`G-code voor dit bestand kon niet worden geladen.`,showTravel:`Verplaatsingen`,topLayer:`Bovenste laag`,bottomLayer:`Onderste laag`,noSource:`Er is geen bestand opgegeven om te bekijken.`,view:{filament:`Filament`,feature:`Kenmerk`,height:`Hoogte`,width:`Breedte`},feature:{wall:`Wanden`,sparseInfill:`Schaars infill`,solidInfill:`Volledig infill`,bridge:`Brug / overhang`,support:`Support`,skirt:`Skirt / brim`,gapFill:`Gap fill`,ironing:`Ironing`,primeTower:`Prime tower`},back:`Terug`,backToArchives:`Terug naar Afdrukarchieven`,backToFiles:`Terug naar Bestandsbeheer`,plates:`Platen`,plateN:`Plaat {{n}}`},libraryTrash:{title:`Prullenbak`,headerButton:`Prullenbak`,headerTooltip:`Bekijk bestanden die naar de prullenbak zijn verplaatst`,backToFiles:`Terug naar Bestandsbeheer`,subtitleAdmin:`Verwijderde bestanden blijven hier {{days}} dagen en worden daarna automatisch verwijderd. Deze weergave toont verwijderde bestanden van alle gebruikers.`,subtitleUser:`Verwijderde bestanden blijven hier {{days}} dagen en worden daarna automatisch verwijderd.`,loading:`Prullenbak laden…`,loadError:`Prullenbak kon niet worden geladen.`,empty:`De prullenbak is leeg.`,summary:`{{count}} bestanden · {{size}}`,emptyTrash:`Prullenbak legen`,restore:`Herstellen`,purgeNow:`Nu verwijderen`,autoPurgeIn:`Automatische verwijdering over {{when}}`,days:`dagen`,retentionLabel:`Automatisch verwijderen na`,selectAll:`Alles selecteren`,selectOne:`{{filename}} selecteren`,selectionCount:`{{count}} geselecteerd`,bulkRestore:`Geselecteerde herstellen`,bulkPurge:`Geselecteerde verwijderen`,col:{filename:`Bestand`,folder:`Map`,size:`Grootte`,deleted:`Naar prullenbak verplaatst`,autoPurge:`Automatisch verwijderen`,owner:`Eigenaar`,actions:`Acties`},confirm:{purgeTitle:`Definitief verwijderen?`,purgeBody:`{{filename}} wordt van de schijf verwijderd en kan niet worden hersteld.`,emptyTitle:`Prullenbak legen?`,emptyBody:`Alle {{count}} bestanden worden van de schijf verwijderd. Dit kan niet ongedaan worden gemaakt.`,bulkPurgeTitle:`Geselecteerde bestanden definitief verwijderen?`,bulkPurgeBody:`De {{count}} geselecteerde bestanden worden van de schijf verwijderd en kunnen niet worden hersteld.`,cta:`Definitief verwijderen`},toast:{restored:`Bestand hersteld.`,restoreFailed:`Bestand kon niet worden hersteld.`,purged:`Bestand definitief verwijderd.`,purgeFailed:`Bestand kon niet worden verwijderd.`,emptied:`{{count}} bestand(en) uit prullenbak verwijderd.`,emptyFailed:`Prullenbak kon niet worden geleegd.`,retentionSaved:`Automatisch verwijderen ingesteld op {{days}} dagen.`,retentionFailed:`Bewaarinstelling kon niet worden opgeslagen.`,bulkRestored:`{{count}} bestand(en) hersteld.`,bulkPurged:`{{count}} bestand(en) verwijderd.`}},libraryPurge:{title:`Oude bestanden opschonen`,headerButton:`Oude opschonen`,headerTooltip:`Oude bestanden in bulk naar prullenbak verplaatsen`,description:`Ruim oude bestanden in je bibliotheek in één keer op. Bestanden met afdrukgeschiedenis worden beoordeeld op de datum waarop ze voor het laatst zijn afgedrukt; nooit afgedrukte bestanden op hun uploaddatum.`,ageLabel:`Bestanden ouder dan verplaatsen`,days:`dagen`,includeNeverPrinted:`Bestanden opnemen die nooit zijn afgedrukt`,effectsTitle:`Wat gebeurt er wanneer je op Opschonen klikt`,effect1:`Overeenkomende bestanden worden naar de Prullenbak verplaatst — ze worden nog niet van de schijf verwijderd.`,effect2:`Je kunt ze vanuit de Prullenbak herstellen totdat de bewaartermijn is verstreken.`,effect3:`Na de bewaartermijn verwijdert de prullenbakopruimer ze definitief van de schijf.`,effect4:`Bestanden in externe (gekoppelde) mappen worden overgeslagen — Bambuddy verwijdert nooit bytes waarvan het geen eigenaar is.`,previewLoading:`Controleren hoeveel bestanden overeenkomen…`,previewFailed:`Voorbeeld van opschoning kon niet worden gemaakt.`,previewSummary:`{{count}} bestanden · {{size}} zouden naar de prullenbak worden verplaatst`,andMore:`…en nog {{count}}`,warning:`Bestanden in de prullenbak tellen nog mee voor opslagruimte totdat de bewaartermijn verloopt. Leeg daarna de Prullenbak om direct schijfruimte vrij te maken.`,confirmCta:`{{count}} naar prullenbak verplaatsen`,purging:`Naar prullenbak verplaatsen…`,toast:{success:`{{count}} bestand(en) naar prullenbak verplaatst.`,failed:`Bestanden opschonen mislukt.`}},libraryAutoPurge:{enableLabel:`Oude bestanden automatisch opschonen`,enableDescription:`Voert de beheeropschoning eenmaal per dag uit. Bestanden gaan eerst naar de Prullenbak — ze worden niet direct verwijderd.`,ageLabel:`Bestanden automatisch opschonen ouder dan`,ageDescription:`Minimaal 7 dagen, maximaal 10 jaar. Gebruikt dezelfde leeftijdsregel als de handmatige knop Opschonen.`,days:`dagen`,includeNeverPrinted:`Bestanden opnemen die nooit zijn afgedrukt`,saveFailed:`Instellingen voor automatisch opschonen konden niet worden opgeslagen.`},archivePurge:{headerButton:`Oude opschonen`,headerTooltip:`Oude archieven in bulk verwijderen`,title:`Oude archieven opschonen`,description:`Ruim oude afdrukgeschiedenis op. Elk archief wordt beoordeeld op de meest recente voltooiingsdatum van een afdruk — opnieuw afdrukken vernieuwt de leeftijd, zodat actief werk nooit wordt opgeschoond.`,ageLabel:`Archieven verwijderen die niet zijn afgedrukt in de laatste`,days:`dagen`,effectsTitle:`Wat gebeurt er wanneer je op Opschonen klikt`,effect1:`Elk overeenkomend archief wordt verborgen uit de lijsten en de bestanden worden van de schijf verwijderd (3MF, miniatuur, timelapse, bron-3MF, F3D-ontwerpbestand, foto's).`,effect2:`De archiefrij blijft in de database zodat Snelle statistieken de bijdragen voor filament, tijd, kosten en energie behoudt — hetzelfde als de standaard bij het verwijderen van één archief.`,effect3:`Vink hieronder "Ook uit statistieken verwijderen" aan om ook de bijdrage aan Snelle statistieken te verwijderen (zelfde als de optie bij het verwijderen van één archief). Dit is onomkeerbaar.`,effect4:`Opnieuw afdrukken vernieuwt de leeftijdsklok van een archief, zodat archieven die je nog gebruikt veilig blijven.`,purgeStatsLabel:`Ook uit statistieken verwijderen`,purgeStatsHint:`Verwijdert de overeenkomende archieven uit Snelle statistieken (filament, tijd, kosten, energie). Zonder dit behoudt Snelle statistieken elke bijdrage en verdwijnen alleen de bestanden van de schijf.`,previewLoading:`Controleren hoeveel archieven overeenkomen…`,previewFailed:`Voorbeeld van opschoning kon niet worden gemaakt.`,previewSummary:`{{count}} archieven · {{size}} zouden worden verwijderd`,andMore:`…en nog {{count}}`,warning:`Bestanden worden van de schijf verwijderd en kunnen niet worden hersteld. Download of markeer als favoriet wat je wilt bewaren voordat je doorgaat.`,confirmCta:`{{count}} archief/archieven verwijderen`,purging:`Verwijderen…`,toast:{success:`{{count}} archief/archieven verwijderd.`,failed:`Archieven opschonen mislukt.`}},archiveAutoPurge:{enableLabel:`Oude archieven automatisch opschonen`,enableDescription:`Verbergt eenmaal per dag archieven uit de lijsten en verwijdert hun bestanden van de schijf als ze niet binnen de ingestelde termijn zijn afgedrukt. Opnieuw afdrukken reset de klok.`,ageLabel:`Archieven automatisch verwijderen die niet zijn afgedrukt in de laatste`,ageDescription:`Minimaal 7 dagen, maximaal 10 jaar. Gebaseerd op de meest recente voltooiing van een afdruk — opnieuw afdrukken vernieuwt de leeftijd. Verwijdert de 3MF, miniatuur, timelapse, bron-3MF, F3D en foto's.`,days:`dagen`,purgeStatsLabel:`Ook uit statistieken verwijderen`,purgeStatsDescription:`Wanneer ingeschakeld verwijdert de dagelijkse opruimer elk opgeschoond archief ook uit Snelle statistieken (filament, tijd, kosten, energie). Standaard uit — Snelle statistieken behoudt de bijdrage; alleen de bestanden verdwijnen van de schijf.`,runNow:`Archieven nu opschonen`,saveFailed:`Instellingen voor automatisch opschonen konden niet worden opgeslagen.`},cameraTokens:{scope:{camera_stream:`Camerastream`,camwall:`Cameramuur`,overlay:`Streamingoverlay`},title:`Camera-API-tokens`,navTitle:`Camera-API-tokens`,description:`Langlevende tokens om de camerastream in Home Assistant, Frigate, kiosks of andere tools met een stabiele URL in te sluiten. Kies het bereik wanneer je er een maakt; een token kan op elk moment worden ingetrokken.`,loading:`Laden…`,confirmRevoke:{title:`Dit token intrekken?`,body:`Elk apparaat dat "{{name}}" gebruikt verliest direct toegang. Dit kan niet ongedaan worden gemaakt.`,cancel:`Annuleren`,confirm:`Intrekken`},create:{scopeLabel:`Bereik`,hintCameraStream:`Een camerastreamtoken kan alleen camerastreams en momentopnamen ophalen. Gebruik dit voor Home Assistant, Frigate of iets dat één camera insluit.`,hintCamWall:`Een Cameramuur-token opent /camwall op een scherm zonder login. Het kan de naam en status van elke printer en hun camerastreams zien. Het kan geen bestandsnamen, adressen of toegangscodes zien.`,hintOverlay:`Een Streaming Overlay-token opent /overlay/{printerId} op een scherm zonder login — voor OBS of een livestream. Het kan de camerastream van één printer plus de live afdrukstatus zien, inclusief de bestandsnaam op het scherm. Het kan geen adressen of toegangscodes zien.`,title:`Nieuw token aanmaken`,nameLabel:`Tokennaam`,namePlaceholder:`bijv. Home Assistant`,daysLabel:`Dagen tot vervaldatum`,submit:`Maken`,hint:`Maximale geldigheidsduur is 365 dagen. De tokenwaarde wordt slechts één keer getoond bij het aanmaken — kopieer deze nu.`},created:{camWallUrlTitle:`Cameramuur-URL voor dit scherm`,camWallUrlHint:`Open dit op het scherm. Iedereen die de URL kan lezen kan de muur bekijken, dus behandel hem als een sleutel — trek het token in om de toegang van het scherm te stoppen.`,overlayUrlTitle:`Overlay-URL voor OBS`,overlayUrlHint:`Voeg dit toe als Browser Source in OBS. Wijzig het nummer /overlay/1 in het nummer van je printer (uit de URL op de pagina Printers). Iedereen die de URL kan lezen kan de stream bekijken, dus behandel hem als een sleutel — trek het token in om de toegang te stoppen.`,title:`Token aangemaakt — kopieer het nu`,warning:`Dit is de enige keer dat dit token zichtbaar is. Nadat je dit venster sluit kun je het nooit meer bekijken.`,copy:`Kopiëren`,dismiss:`Ik heb het opgeslagen`},list:{scope:`Bereik`,myTitle:`Mijn tokens`,allTitle:`Alle gebruikers (beheerweergave)`,empty:`Nog geen tokens.`,name:`Naam`,owner:`Eigenaar`,prefix:`Voorvoegsel`,created:`Aangemaakt`,expires:`Verloopt`,lastUsed:`Laatst gebruikt`,revoke:`Intrekken`,expired:`Verlopen`},toast:{created:`Token aangemaakt`,createFailed:`Token aanmaken mislukt`,revoked:`Token ingetrokken`,revokeFailed:`Token intrekken mislukt`,loadFailed:`Tokens laden mislukt`,copied:`Naar klembord gekopieerd`,copyFailed:`Kopiëren mislukt — selecteer en kopieer handmatig`}},forecast:{title:`Prognose`,noSpools:`Geen actieve spoelen gevonden. Voeg spoelen toe aan je voorraad om prognosegegevens te zien.`,noUsageData:`Geen verbruiksgegevens beschikbaar — voorraadverloop kan niet worden voorspeld.`,sku:`SKU`,material:`Materiaal`,stock:`Voorraad`,dailyRate:`Tempo`,daysLeft:`Dagen resterend`,emptyBy:`Leeg op`,reorderBy:`Bestellen vóór`,actions:`Acties`,trend:`Trend`,estimated:`Geschat`,noData:`Geen gegevens`,timeframe:`Periode`,chartTitle:`Verwachte voorraad — top 5 materialen`,dashedLinesROP:`Stippellijnen = bestelpunten`,stockLevel:`Voorraadniveau`,reorderPoint:`Bestelpunt`,safetyMargin:`Veiligheidsmarge`,trendLegend:`Trend (op historie gebaseerd, serviceniveau 95%)`,estimatedLegend:`Geschat (gewichtsverschil)`,noDataLegend:`Geen gegevens`,ropLabel:`ROP`,ssLabel:`SS`,safetyStockLegend:`Veiligheidsvoorraad`,stockArrivalLegend:`Voorraadontvangst`,stockoutLegend:`Voorraad op`,alertCount_one:`{{count}} waarschuwing`,alertCount_other:`{{count}} waarschuwingen`,order:`Bestellen`,save:`Opslaan`,cancel:`Annuleren`,settingsSaved:`Instellingen opgeslagen`,failedSaveSettings:`Instellingen opslaan mislukt`,globalLeadTimeSaved:`Globale levertijd opgeslagen`,globalLeadTime:`Globale levertijd`,globalLeadTimeHint:`Ondergrens voor globale levertijd — gebruikt bij de berekening van het bestelpunt voor alle SKU's`,skuLeadTimeOverride:`Overschrijving levertijd`,skuLeadTimeHint:`0 = globale levertijd gebruiken. Stel >0 in om voor deze SKU te overschrijven.`,safetyMarginLabel:`Veiligheidsmarge`,effectiveLeadTime:`Effectieve levertijd`,effectiveLeadTimeHint:`max(globaal {{global}}d, SKU {{sku}}d)`,reorderPointHint:`d̄ × LT + veiligheidsmarge — bestellen wanneer voorraad dit niveau bereikt`,safetyMarginHint:`Statistische veiligheidsvoorraad (z=1.65 × σ × √LT) + door gebruiker ingestelde buffer`,safetyMarginHintDays:`Buffer bovenop de statistische veiligheidsvoorraad.{{approx}}`,safetyMarginHintDaysApprox:` ≈ {{g}}g bij huidig verbruik.`,safetyMarginHintG:`Vaste gewichtsbuffer bovenop de statistische veiligheidsvoorraad.{{approx}}`,safetyMarginHintGApprox:` ≈ {{days}}d bij huidig verbruik.`,individualSpools:`Afzonderlijke spoelen`,labelWeight:`Label`,spoolCount_one:`{{count}} spoel`,spoolCount_other:`{{count}} spoelen`,stockBreakRisk:`Risico op voorraadtekort`,stockBreakDetail:`Nog {{days}}d, levertijd {{lt}}d.`,stockBreakBefore:`Voorraadtekort vóór aanvulling`,reorderNow:`Nu bestellen`,reorderTriggerPassed:`Activeringsdatum {{date}} is verstreken.`,shoppingList:`Boodschappenlijst`,shoppingListItems_one:`({{count}} item)`,shoppingListItems_other:`({{count}} items)`,shoppingListEmpty:`Boodschappenlijst is leeg. Klik op het winkelwagenpictogram van een rij om items toe te voegen.`,addToCart:`Aan boodschappenlijst toevoegen`,alertsSnoozed:`Waarschuwingen voor deze SKU dempen`,alertsEnabled:`Waarschuwingen voor deze SKU weer inschakelen`,addedToCart:`Toegevoegd aan boodschappenlijst`,failedAddItem:`Item toevoegen mislukt`,listView:`Lijst`,logisticsView:`Logistiek`,qty:`Aantal`,weight:`Gewicht`,leadTime:`Levertijd`,expectedRestock:`Verwachte aanvulling`,status:`Status`,note:`Notitie`,pending:`In afwachting`,purchased:`Gekocht`,received:`Ontvangen`,markPurchased:`Markeren als gekocht`,markReceived:`Markeren als ontvangen — voegt spoelen toe aan Voorraad`,resetToPending:`Terugzetten naar in behandeling`,remove:`Verwijderen`,clearAll:`Alles wissen`,downloadCsv:`CSV`,addToCartTitle:`Aan boodschappenlijst toevoegen`,byQuantity:`Op aantal`,byDuration:`Op duur`,numberOfSpools:`Aantal spoelen`,lastHowManyDays:`Hoeveel dagen moet dit meegaan?`,noUsageQty:`Geen verbruiksgegevens — aantal ingesteld op 1.`,noteOptional:`Notitie (optioneel)`,notePlaceholder:`bijv. voor project X, dringend…`,addNSpools_one:`{{count}} spoel toevoegen`,addNSpools_other:`{{count}} spoelen toevoegen`,onArrival:`Bij aankomst`,stockBreakIn:`Voorraadtekort over {{days}}d.`,stockRunsOutBefore:`Voorraad raakt op voordat de levertijd van {{lt}}d is verstreken.`,atRate:`Bij {{rate}}g/dag heb je nodig`,moreSpools_one:`nog {{count}} spoel`,moreSpools_other:`nog {{count}} spoelen`,bridgeGap:`om het tekort te overbruggen.`,noReadAccess:`Je hebt geen machtiging om voorraadprognoses te bekijken.`,noWriteAccess:`Je hebt geen machtiging om prognose-instellingen te wijzigen.`}}},ko:{translation:{nav:{printers:`프린터`,archives:`아카이브`,queue:`대기열`,stats:`통계`,profiles:`프로필`,maintenance:`유지보수`,projects:`프로젝트`,inventory:`필라멘트`,finance:`재무`,files:`파일 관리자`,makerworld:`MakerWorld`,notifications:`알림`,settings:`설정`,system:`시스템`,collapseSidebar:`사이드바 접기`,expandSidebar:`사이드바 펼치기`,update:`업데이트`,updateAvailable:`업데이트 가능: v{{version}}`,updateAvailableBanner:`버전 {{version}}이(가) 출시되었습니다!`,viewUpdate:`업데이트 보기`,viewOnGithub:`GitHub에서 보기`,keyboardShortcuts:`키보드 단축키 (?)`,switchToLight:`라이트 모드로 전환`,switchToDark:`다크 모드로 전환`,switchToSystem:`기기 설정으로 전환`,smartSwitches:`스마트 스위치`,logout:`로그아웃`,installApp:`앱 설치`,installAppSuccess:`Bambuddy가 설치되었습니다`},common:{plusNMore:`외 {{count}}개`,save:`저장`,saving:`저장 중...`,cancel:`취소`,delete:`삭제`,edit:`편집`,add:`추가`,close:`닫기`,confirm:`확인`,loading:`로딩 중...`,error:`오류`,errorLoading:`데이터 로딩 오류`,retry:`재시도`,success:`성공`,warning:`경고`,enabled:`활성화됨`,disabled:`비활성화됨`,yes:`예`,no:`아니요`,on:`켜짐`,off:`꺼짐`,all:`전체`,none:`없음`,search:`검색`,filter:`필터`,sort:`정렬`,refresh:`새로고침`,download:`다운로드`,upload:`업로드`,uploading:`업로드 중...`,uploadFailed:`업로드 실패`,actions:`작업`,status:`상태`,name:`이름`,description:`설명`,date:`날짜`,time:`시간`,hours:`시간`,minutes:`분`,seconds:`초`,days:`일`,enable:`활성화`,disable:`비활성화`,permissions:`권한`,noPrinters:`등록된 프린터가 없습니다`,noData:`데이터가 없습니다`,linkNotFound:`링크를 찾을 수 없습니다`,required:`필수`,optional:`선택`,dismiss:`닫기`,apply:`적용`,reset:`초기화`,export:`내보내기`,import:`가져오기`,clear:`지우기`,selectAll:`전체 선택`,deselectAll:`전체 해제`,noChange:`— 변경 없음 —`,unchanged:`변경 없음`,unassigned:`미할당`,unknown:`알 수 없음`,unknownError:`알 수 없는 오류`,today:`오늘`,tomorrow:`내일`,asap:`즉시`,overdue:`기한 초과`,now:`지금`,collapse:`접기`,expand:`펼치기`,previous:`이전`,next:`다음`,viewArchive:`아카이브 보기`,viewInFileManager:`파일 관리자에서 보기`,addedBy:`{{username}}님이 추가함`,prints:`인쇄`,more:`+{{count}}개 더`,ascending:`오름차순`,descending:`내림차순`,back:`뒤로`,copy:`복사`,copied:`복사됨!`,printer:`프린터`,remove:`제거`,type:`유형`,print:`인쇄`,rename:`이름 변경`,move:`이동`,create:`만들기`,duplicate:`복제`,left:`왼쪽`,right:`오른쪽`,user:`사용자`,run:`실행`,running:`실행 중...`},finance:{allTypes:`모든 유형`,allCostCenters:`모든 비용 센터`,title:`재무`,subtitle:`지갑, 개인 거래 및 비용 센터`,noAccess:`재무 데이터를 볼 권한이 없습니다.`,personalView:`개인 보기`,adminView:`관리자 보기`,createCostCenter:`비용 센터 만들기`,adjustWallet:`지갑 조정`,addManualPrint:`수동 인쇄 추가`,manageMembers:`비용 센터 구성원 관리`,currentBalance:`개인 잔액`,transactions:`거래`,personalTransactions:`개인 거래`,costCenters:`비용 센터`,availableForPrinting:`인쇄 할당 가능`,costCenterName:`이름`,budgetType:`예산 유형`,monthlyBudget:`월 예산`,totalBudget:`총예산`,noBudget:`예산 없음`,create:`만들기`,selectUser:`사용자 선택`,transactionType:`유형`,amount:`금액`,noCostCenter:`비용 센터 없음`,descriptionOptional:`설명(선택 사항)`,applyAdjustment:`조정 적용`,memberCanPrint:`구성원이 인쇄할 수 있음`,addMember:`구성원 추가`,canPrint:`인쇄 가능`,noMembers:`할당된 구성원이 없습니다.`,editCostCenter:`비용 센터 편집`,myCostCenters:`내 비용 센터`,costCentersHint:`예산 한도를 검토하고 비용을 관리하세요`,noCostCenters:`비용 센터를 찾을 수 없습니다.`,owner:`소유자`,balance:`계정 잔액`,unlimited:`무제한`,budgetPolicyHint:`계정 잔액은 비용을 기록합니다. 인쇄는 선택한 비용 센터의 예산으로만 제한되며, 예산이 없으면 무제한입니다.`,budget:`예산`,shared:`공유`,cannotEditPrivateCostCenter:`비공개 비용 센터는 여기에서 편집할 수 없습니다`,recentTransactions:`최근 거래`,transactionsHint:`유형 및 비용 센터별 필터링`,first:`처음`,prev:`이전`,next:`다음`,last:`마지막`,pageNumberOf:`{{total}}페이지 중 {{page}}페이지`,noTransactions:`사용 가능한 거래가 없습니다.`,noTransactionsForFilter:`선택한 필터와 일치하는 거래가 없습니다.`,costCenter:`비용 센터`,balanceAfter:`거래 후 잔액`,userWithId:`사용자 #{{id}}`,partial:`일부`,editTransaction:`거래 편집`,selectCostCenter:`비용 센터 선택...`,costCenterRequired:`비용 센터를 선택하세요`,amountExample:`예: 4.00`,manualAdjustmentExample:`예: 수동 조정`,userRequired:`사용자를 선택하세요`,amountInvalid:`금액은 유효한 숫자여야 합니다`,createdCostCenter:`비용 센터를 만들었습니다`,createCostCenterFailed:`비용 센터를 만들지 못했습니다`,transactionDeleted:`거래를 삭제했습니다`,deleteTransactionFailed:`거래를 삭제하지 못했습니다`,transactionEdited:`거래를 업데이트하고 원장을 다시 계산했습니다`,editTransactionFailed:`거래를 편집하지 못했습니다`,manualPrintCreated:`수동 인쇄 비용을 추가하고 원장을 다시 계산했습니다`,manualPrintFailed:`수동 인쇄를 만들지 못했습니다`,memberSaved:`구성원을 저장했습니다`,memberSaveFailed:`구성원을 저장하지 못했습니다`,memberRemoved:`구성원을 제거했습니다`,memberRemoveFailed:`구성원을 제거하지 못했습니다`,costCenterNameRequired:`비용 센터 이름은 필수입니다`,costCenterUpdated:`비용 센터를 업데이트했습니다`,costCenterUpdateFailed:`비용 센터를 업데이트하지 못했습니다`,confirmDeleteCostCenter:`비용 센터 "{{name}}"을(를) 삭제하시겠습니까?`,costCenterDeleted:`비용 센터를 삭제했습니다`,costCenterDeleteFailed:`비용 센터를 삭제하지 못했습니다`,deleteTransactionConfirm:`이 거래를 삭제하시겠습니까? 잔액은 자동으로 다시 계산됩니다.`,deposit:`입금`,withdraw:`출금`,printCharge:`인쇄 비용`,deleteTransaction:`거래 삭제`},printers:{title:`프린터`,addPrinter:`프린터 추가`,editPrinter:`프린터 편집`,deletePrinter:`프린터 삭제`,printerName:`프린터 이름`,serialNumber:`일련번호`,ipAddress:`IP 주소 / 호스트명`,accessCode:`액세스 코드`,model:`모델`,nozzleCount:`노즐 수`,autoArchive:`자동 아카이브`,status:{available:`사용 가능`,idle:`대기 중`,printing:`인쇄 중`,paused:`일시정지`,offline:`오프라인`,problem:`문제 발생`,error:`오류`,finished:`완료`,unknown:`알 수 없음`},temperatures:{nozzle:`노즐`,bed:`베드`,chamber:`챔버`},heaterHistory:{title:`히터 기록`,openLabel:`히터 기록 보기`,nozzle:`노즐`,nozzle2:`노즐 2`,bed:`베드`,chamber:`챔버`,error:`기록을 불러올 수 없습니다`,empty:`아직 기록된 데이터가 없습니다`},progress:`{{percent}}% 완료`,timeRemaining:`{{time}} 남음`,deleteConfirm:`"{{name}}"을(를) 삭제하시겠습니까?`,maintenanceOk:`유지보수 정상`,maintenanceWarning:`{{count}}개 경고`,maintenanceWarning_plural:`{{count}}개 경고`,maintenanceDue:`{{count}}개 예정`,maintenanceDue_plural:`{{count}}개 예정`,sort:{name:`이름`,status:`상태`,model:`모델`,location:`위치`,eta:`남은 시간`,ascending:`오름차순 정렬`,descending:`내림차순 정렬`},cardSize:{small:`작은 카드`,medium:`중간 카드`,large:`큰 카드`,extraLarge:`아주 큰 카드`},pageView:{openCamWallPage:`카메라 월을 페이지로 열기`,cards:`카드`,camWall:`카메라 월`},camWall:{page:{tokenRejected:`이 카메라 월 링크는 더 이상 유효하지 않습니다. 토큰이 만료되었거나 취소되었을 수 있습니다.`,loadFailed:`프린터를 불러오지 못했습니다.`},noPrinters:`표시할 프린터가 없습니다`,noSignal:`신호 없음`,live:`라이브`,snap:`스냅`,off:`꺼짐`,summary:`라이브 {{live}}개, 스냅 {{snap}}개, 총 {{total}}개`,layer:`레이어 {{cur}}/{{total}}`,timeLeft:`{{time}} 남음`,statusMode:{off:`꺼짐`,compact:`간단`,full:`전체`},settings:{title:`카메라 월 설정`,maxLive:`최대 라이브 스트림`,maxLiveHint:`동시에 라이브 스트리밍할 타일 수. 나머지는 스냅샷으로 갱신됩니다.`,snapshotInterval:`스냅샷 간격(초)`,snapshotIntervalHint:`비라이브 타일이 새 스냅샷을 가져오는 주기.`,statusOverlay:`상태 표시`,statusOverlayHint:`간단: 상태 배지만 표시. 전체: + 진행률, 레이어, 남은 시간.`}},hideOffline:`오프라인 숨기기`,nextAvailable:`다음 가용`,powerOn:`전원 켜기`,offlinePrintersWithPlugs:`스마트 플러그가 연결된 오프라인 프린터`,noPrintersConfigured:`아직 설정된 프린터가 없습니다`,search:`프린터 검색...`,noSearchResults:`검색 또는 필터 조건에 맞는 프린터가 없습니다`,filter:{allStatuses:`모든 상태`,allLocations:`모든 위치`},toolbar:{filters:`필터`,view:`보기`,actions:`작업`},readyToPrint:`인쇄 준비 완료`,external:`외부`,extL:`외부-L`,extR:`외부-R`,deleteArchives:`인쇄 아카이브 삭제`,noLabel:`라벨 없음`,printPreview:`인쇄 미리보기`,width:`너비`,height:`높이`,noObjectsFound:`객체를 찾을 수 없습니다`,objectsLoadedOnPrintStart:`인쇄 시작 시 객체가 로드됩니다`,willBeSkipped:`건너뛸 예정`,name:`이름`,serialCannotBeChanged:`일련번호는 변경할 수 없습니다`,locationHelp:`프린터 그룹화 및 대기열 작업 필터링에 사용됩니다`,wifiSignal:{veryWeak:`매우 약함`,weak:`약함`,fair:`보통`,good:`좋음`,excellent:`매우 좋음`},maintenanceUpToDate:`모든 유지보수 최신 상태 - 클릭하여 보기`,maintenance:{title:`유지보수 중`,subtitle:`이 프린터는 일시 중지되었습니다 — 연결되지 않음, 대기열에서 제외, 알림 전송 안 함.`,pillLabel:`유지보수`,exitButton:`유지보수 종료`,menuEnter:`유지보수 모드로 전환`,menuExit:`유지보수 모드 종료`,toastEntered:`{{name}} 은(는) 이제 유지보수 모드입니다`,toastExited:`{{name}} 이(가) 다시 온라인 상태입니다`,confirmMidPrintTitle:`인쇄 중 유지보수 모드로 전환하시겠습니까?`,confirmMidPrintMessage:`{{name}} 은(는) 현재 인쇄 중입니다. 유지보수 모드로 전환하면 MQTT가 연결 해제되고 이 작업의 진행률 추적 및 완료 알림이 중지됩니다. 계속하시겠습니까?`,editFieldLabel:`유지보수 모드`,editFieldHelp:`활성화하면 이 프린터는 MQTT, 대기열 디스패치 및 알림에서 일시 중지됩니다 — 수리, 병렬 Bambuddy 설치 또는 임시 중지에 유용합니다.`},chamberLightOn:`챔버 조명 켜기`,chamberLightOff:`챔버 조명 끄기`,files:`파일`,browseFiles:`프린터 파일 탐색`,autoOffAfterPrint:`인쇄 후 자동 전원 끄기`,autoOffExecuted:`자동 끄기 실행됨 - 초기화하려면 프린터를 켜세요`,hmsErrors:`HMS 오류`,viewHmsErrors:`{{count}}개 HMS 오류 보기`,resume:`재개`,pause:`일시정지`,stop:`정지`,camera:`카메라`,skipObject:`객체 건너뛰기`,reconnect:`재연결`,forceRefresh:`강제 새로고침`,forceRefreshSuccess:`새로고침 요청됨`,mqttDebug:`MQTT 디버그`,printerInformation:`프린터 정보`,copyToClipboard:`복사`,copied:`복사됨!`,state:`상태`,wifiSignalLabel:`WiFi 신호`,developerMode:`개발자 모드`,enabled:`활성화됨`,disabled:`비활성화됨`,addedOn:`추가됨`,sdCard:`SD 카드`,inserted:`삽입됨`,notInserted:`삽입되지 않음`,totalPrintHours:`인쇄 시간`,activeNozzle:`활성: {{nozzle}} 노즐`,amsSwitchInletTooltip:`필라멘트 트랙 스위치 IN-{{inlet}}({{side}}) — 양쪽 노즐에 공급`,nozzleRack:`노즐 랙`,nozzleDocked:`도킹됨`,nozzleMounted:`장착됨`,nozzleActive:`활성`,nozzleIdle:`대기`,nozzleDiameter:`직경`,nozzleType:`유형`,nozzleStatus:`상태`,nozzleFilament:`필라멘트`,nozzleWear:`마모`,nozzleMaxTemp:`최대 온도`,nozzleSerial:`일련번호`,nozzleHardenedSteel:`경화강`,nozzleStainlessSteel:`스테인리스강`,nozzleTungstenCarbide:`텅스텐 카바이드`,nozzleFlow:`유량`,nozzleHighFlow:`고유량`,nozzleStandardFlow:`표준`,firmwareUpdate:`펌웨어 업데이트`,firmwareInstructions:`프린터 터치스크린에서`,firmwareNav:`이동`,settings:`설정`,firmware:`펌웨어`,discoverPrinters:`프린터 검색`,searching:`검색 중...`,manualEntry:`수동 입력`,addFromCloud:`클라우드에서 추가`,toast:{printerDeleted:`프린터가 삭제되었습니다`,missingSpoolAssignment:`{{printer}}에서 인쇄가 시작되었습니다. 슬롯 할당 누락: {{slots}}`,killSwitchTriggered:`결제 킬 스위치가 {{printer}}에서 승인되지 않은 인쇄를 중지했습니다: {{filename}}`,billingChargeFailed:`{{printer}}의 {{filename}} 결제에 실패했습니다. 예산 예약은 유지되었습니다. 서버 로그를 확인하세요.`,assignmentVerified:`슬롯 {{slot}}에 필라멘트가 로드되었습니다 ({{printer}})`,assignmentVerifiedNoKprofile:`{{printer}}의 슬롯 {{slot}}이(가) 로드되었지만 유량 보정 프로파일(K 프로파일)이 적용되지 않았습니다`,assignmentNotConfirmed:`{{printer}}의 슬롯 {{slot}} 할당을 확인할 수 없습니다. AMS 슬롯을 확인하세요`,printerAdded:`프린터가 추가되었습니다`,printerUpdated:`프린터가 업데이트되었습니다`,failedToDelete:`프린터 삭제 실패`,failedToAdd:`프린터 추가 실패`,failedToUpdate:`프린터 업데이트 실패`,commandSent:`명령이 전송되었습니다`,failedToSendCommand:`명령 전송 실패`,turnedOn:`{{name}} 켜짐`,failedToPowerOn:`{{name}} 전원 켜기 실패`,scriptTriggered:`스크립트가 실행되었습니다`,printStopped:`인쇄가 정지되었습니다`,printPaused:`인쇄가 일시정지되었습니다`,printResumed:`인쇄가 재개되었습니다`,referenceDeleted:`참조가 삭제되었습니다`,detectionAreaSaved:`감지 영역이 저장되었습니다`,failedToRunScript:`스크립트 실행 실패`,failedToStopPrint:`인쇄 정지 실패`,failedToPausePrint:`인쇄 일시정지 실패`,failedToResumePrint:`인쇄 재개 실패`,failedToControlChamberLight:`챔버 조명 제어 실패`,failedToSetSpeed:`인쇄 속도 설정 실패`,failedToUpdateSetting:`설정 업데이트 실패`,failedToSkipObjects:`객체 건너뛰기 실패`,failedToRereadRfid:`RFID 재읽기 실패`,failedToCheckPlate:`플레이트 확인 실패`,failedToUpdateLabel:`라벨 업데이트 실패`,failedToDeleteReference:`참조 삭제 실패`,failedToSaveDetectionArea:`감지 영역 저장 실패`,plateCheckEnabled:`플레이트 확인 활성화됨`,plateCheckDisabled:`플레이트 확인 비활성화됨`,calibrationSaved:`캘리브레이션이 저장되었습니다!`,calibrationFailed:`캘리브레이션 실패`,rfidRereadInitiated:`RFID 재읽기가 시작되었습니다`,loadInitiated:`필라멘트 로딩 중…`,unloadInitiated:`필라멘트 언로딩 중…`,failedToLoad:`필라멘트 로드 실패`,failedToUnload:`필라멘트 언로드 실패`,connectionFailedNotAdded:`프린터에 연결할 수 없습니다. IP, 시리얼 번호, 액세스 코드를 확인하고 LAN 전용 모드가 켜져 있는지 확인하세요. 프린터가 추가되지 않았습니다.`},connection:{connected:`연결됨`,offline:`오프라인`},plateStatus:{markCleared:`플레이트 비움으로 표시`,cleared:`플레이트 비워짐`,notCleared:`플레이트 미비움`,inUse:`플레이트 사용 중`},queue:{inQueue:`대기열에 {{count}}개`,inQueue_plural:`대기열에 {{count}}개`},controls:`제어`,rfid:{reread:`RFID 재읽기`},ams:{load:`로드`,unload:`언로드`,feedTitle:`{{slot}}을(를) 어느 노즐로 로드할까요?`,feedPrompt:`Filament Track Switch는 이 슬롯을 양쪽 핫엔드로 보낼 수 있습니다. 공급할 쪽을 선택하세요.`,feedLeft:`왼쪽 노즐`,feedRight:`오른쪽 노즐`,feedAlreadyLoaded:`이미 로드됨`,switchNotReady:`Filament Track Switch가 아직 설정되지 않았습니다. 프린터에서 각 AMS를 입구에 할당한 뒤 다시 시도하세요.`},bedJog:{limitWarning:`수동 이동 중에는 이동 한계가 적용되지 않습니다. Bambu 펌웨어 버그로 인해 원격 명령에서는 소프트웨어 엔드스톱이 무시됩니다. 충돌하지 않도록 주의해서 이동하세요.`,title:`조그 컨트롤`,bed:`베드`,step:`이동 거리 (mm)`,up:`플레이트 위로`,down:`플레이트 아래로`,toolheadUp:`툴헤드 위로`,toolheadDown:`툴헤드 아래로`,disabledWhilePrinting:`인쇄 중 비활성화됨`,notHomedTitle:`프린터 홈 설정 필요`,notHomedMessage:`마지막 인쇄 이후 홈 설정이 되지 않았습니다. 안전한 위치 지정을 위해 자동 홈 설정을 먼저 실행하거나, 그냥 이동하세요 — 소프트 엔드스톱이 무시됩니다.`,homeZ:`자동 홈 설정`,moveAnyway:`그냥 이동`,homingStarted:`프린터 자동 홈 설정 중…`},permission:{noAdd:`프린터를 추가할 권한이 없습니다`,noEdit:`프린터를 편집할 권한이 없습니다`,noDelete:`프린터를 삭제할 권한이 없습니다`,noControl:`프린터를 제어할 권한이 없습니다`,noFiles:`프린터 파일에 접근할 권한이 없습니다`,noAmsRfid:`AMS RFID를 재읽기할 권한이 없습니다`,noSmartPlugControl:`스마트 플러그를 제어할 권한이 없습니다`,noCamera:`카메라를 볼 권한이 없습니다`},modal:{addTitle:`프린터 추가`,editTitle:`프린터 편집`,myPrinter:`내 프린터`,selectModel:`모델 선택...`,locationGroup:`위치 / 그룹 (선택사항)`,locationPlaceholder:`예: 작업실, 사무실, 지하실`,autoArchiveLabel:`완료된 인쇄 자동 아카이브`,fromPrinterSettings:`프린터 설정에서`,modelOptional:`모델 (선택사항)`,saveChanges:`변경사항 저장`},skipObjects:{tooltip:`객체 건너뛰기`,onlyWhilePrinting:`객체 건너뛰기 (인쇄 중에만)`,requiresMultiple:`객체 건너뛰기 (2개 이상 필요)`,title:`객체 건너뛰기`,matchIdsInfo:`프린터 화면의 ID와 일치`,printerShowsIds:`프린터 화면에서 빌드 플레이트의 객체 ID를 표시합니다`,skipSelected:`선택 항목 건너뛰기`,skipping:`건너뛰는 중...`,noObjectsSelected:`선택된 객체 없음`,selectObjectsToSkip:`현재 인쇄에서 건너뛸 객체를 선택하세요`,skipped:`건너뜀`,objectsSkipped:`객체가 건너뛰어졌습니다`,activeCount:`{{count}}개 활성`,waitForLayer:`객체를 건너뛰려면 2층 이상을 기다리세요 (현재 {{layer}}층)`,skip:`건너뛰기`,confirmTitle:`객체를 건너뛰시겠습니까?`,confirmMessage:`"{{name}}"을(를) 건너뛰시겠습니까? 이 작업은 취소할 수 없습니다.`,confirmAllMessage:`남아 있는 모든 개체가 선택되었습니다. 인쇄 작업이 중지됩니다. 계속하시겠습니까?`,confirmMultipleMessage:`선택한 {{count}}개의 객체를 건너뛰시겠습니까? 이 작업은 취소할 수 없습니다.`},confirm:{deleteTitle:`프린터 삭제`,deleteMessage:`"{{name}}"을(를) 삭제하시겠습니까? 모든 연결 설정이 제거됩니다.`,deleteArchivesNote:`이 프린터의 모든 인쇄 기록이 영구적으로 삭제됩니다.`,keepArchivesNote:`인쇄 기록은 유지되지만 이 프린터와 연결이 해제됩니다.`,stopTitle:`인쇄 정지`,stopMessage:`"{{name}}"의 현재 인쇄를 정지하시겠습니까? 인쇄 작업이 취소됩니다.`,stopButton:`인쇄 정지`,pauseTitle:`인쇄 일시정지`,pauseMessage:`"{{name}}"의 현재 인쇄를 일시정지하시겠습니까?`,pauseButton:`인쇄 일시정지`,resumeTitle:`인쇄 재개`,resumeMessage:`"{{name}}"의 인쇄를 재개하시겠습니까?`,resumeButton:`인쇄 재개`,powerOnTitle:`프린터 전원 켜기`,powerOnMessage:`"{{name}}"의 전원을 켜시겠습니까?`,powerOnButton:`전원 켜기`,powerOffTitle:`프린터 전원 끄기`,powerOffMessage:`"{{name}}"의 전원을 끄시겠습니까?`,powerOffWarning:`경고: "{{name}}"이(가) 현재 인쇄 중입니다! 전원을 끄시겠습니까? 인쇄가 중단되고 프린터가 손상될 수 있습니다.`,powerOffButton:`전원 끄기`,haToggleTitle:`"{{name}}" 토글`,haToggleMessage:`Home Assistant 엔티티 {{entity}}를 토글하시겠습니까? 현재 켜져 있으면 전원이 꺼질 수 있습니다.`,haToggleWarning:`경고: "{{name}}"이(가) 현재 인쇄 중입니다! {{entity}}를 토글하면 전원이 차단되어 인쇄가 중단될 수 있습니다. 계속하시겠습니까?`,haToggleButton:`토글`},bulk:{select:`선택`,selectAll:`전체 선택`,selectByLocation:`위치별 선택`,selected:`{{count}}개 선택됨`,actions:{stop:`정지`,pause:`일시정지`,resume:`재개`,clearPlate:`베드 비우기`,clearHMS:`알림 지우기`},confirm:{stopTitle:`{{count}}개 인쇄 정지`,stopMessage:`{{count}}개 프린터의 활성 인쇄를 취소합니다. 이 작업은 취소할 수 없습니다.`,stopButton:`모두 정지`,pauseTitle:`{{count}}개 인쇄 일시정지`,pauseMessage:`{{count}}개 프린터의 활성 인쇄를 일시정지합니다.`,pauseButton:`모두 일시정지`,clearPlateTitle:`{{count}}개 인쇄 베드 비우기`,clearPlateMessage:`{{count}}개 프린터의 인쇄 베드를 비우고 대기열 작업을 시작할 수 있습니다.`,clearPlateButton:`모두 비우기`},success:`{{count}}개 프린터에서 {{action}} 완료`,partial:`{{succeeded}}개 성공, {{failed}}개 실패`,noneApplicable:`선택된 프린터 중 이 작업에 적합한 상태의 프린터가 없습니다`,selectByState:`상태별 선택`},discovery:{title:`프린터 검색`,searching:`검색 중...`,scanning:`스캔 중...`,scanProgress:`스캔 중... {{scanned}}/{{total}}`,foundPrinters:`{{count}}개 프린터 발견`,noPrintersFound:`프린터를 찾을 수 없습니다`,noPrintersFoundSubnet:`지정된 서브넷에서 프린터를 찾을 수 없습니다.`,noPrintersFoundNetwork:`네트워크에서 프린터를 찾을 수 없습니다.`,allConfigured:`검색된 모든 프린터가 이미 설정되어 있습니다.`,alreadyAdded:`이미 추가됨`,select:`선택`,manualEntry:`수동 입력`,addFromCloud:`클라우드에서 추가`,subnetToScan:`스캔할 서브넷`,dockerNote:`Docker가 감지되었습니다. CIDR 표기법으로 프린터의 서브넷을 입력하세요. docker-compose.yml에 network_mode: host가 필요합니다.`,scanSubnet:`서브넷에서 프린터 스캔`,discoverNetwork:`네트워크에서 프린터 검색`,scanningSubnet:`Bambu 프린터를 위해 서브넷 스캔 중...`,scanningNetwork:`네트워크 스캔 중...`,serialRequired:`일련번호 필수`,unknown:`알 수 없음`,failedToStart:`검색 시작 실패`,customSubnetOption:`사용자 지정 서브넷...`,customSubnetLabel:`사용자 지정 서브넷 (CIDR)`,customSubnetNote:`프린터가 이 서버와 다른 네트워크에 있는 경우 사용자 지정 서브넷을 사용하세요. FTP (990) 및 MQTT (8883) 포트가 라우팅 경계를 통해 접근 가능해야 합니다.`},drying:{start:`건조 시작`,stop:`건조 정지`,temperature:`온도`,duration:`시간`,hours:`시간`,timeRemaining:`{{time}} 남음`,active:`건조 중`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`건조 지원 안 됨`,powerRequired:`건조를 활성화하려면 AMS 전원 어댑터를 연결하세요`,cannotDryNow:`AMS가 지금은 건조를 시작할 수 없습니다`,startingDrying:`건조 시작 중...`,toastCommandSent:`건조 명령을 전송했습니다`,toastStopped:`건조를 중지했습니다`,toastNotStarted:`프린터가 명령을 수락했지만 AMS가 건조를 시작하지 않았습니다. AMS 전원 어댑터가 연결되어 있는지, 프린터가 대기 상태인지 확인하십시오.`,screenOnly:`이 프린터에서는 AMS 건조를 프린터 자체 화면에서만 제어할 수 있습니다 (Bambu 제한 사항)`,stoppingDrying:`건조 정지 중...`,rotateTray:`건조 중 스풀 회전`,rotateUnavailableReason:`사용할 수 없음 — 이 AMS의 슬롯이 툴헤드로 로드되어 있습니다. 스풀이 공급 튜브에 의해 고정되어 회전할 수 없습니다. 먼저 필라멘트를 뺀 후 다시 시도하십시오.`,startMode:`시작 시간`,modeNow:`지금`,modeDelay:`지연 후`,modeAtTime:`시각 지정`,schedule:`예약하기`,scheduledFor:`건조 예약: {{time}}`,scheduledAsap:`건조 예약됨 (프린터 대기 중)`,cancelScheduled:`예약된 건조 취소`,scheduleFailed:`건조 예약에 실패했습니다`,retractFilament:`건조를 시작하려면 AMS 출구의 필라멘트를 빼내세요`,waitingAmsNotFound:`AMS 감지를 기다리는 중`,waitingOffline:`프린터가 온라인 상태가 되기를 기다리는 중`,waitingPrinterBusy:`프린터가 사용 가능해지기를 기다리는 중`,waitingAlreadyDrying:`현재 건조 주기가 끝나기를 기다리는 중`,waitingInterrupted:`중단됨, 프린터가 사용 가능해지면 다시 시작됩니다`,scheduleFailedReason:`예약된 건조에 실패했습니다: {{reason}}`,scheduleFailedUnknown:`알 수 없는 오류`,dismissFailed:`닫기`},amsBackup:{titleOn:`AMS 필라멘트 백업이 켜져 있습니다. 비활성화하려면 클릭하세요.`,titleOff:`AMS 필라멘트 백업이 꺼져 있습니다. 활성화하려면 클릭하세요.`,titleUnknown:`이 프린터에서는 AMS 필라멘트 백업 상태를 확인할 수 없습니다.`,toastEnabled:`AMS 필라멘트 백업이 활성화되었습니다`,toastDisabled:`AMS 필라멘트 백업이 비활성화되었습니다`,modalTitle:`AMS 필라멘트 백업`,modalHelp:`활성 슬롯이 소진되면 프린터는 같은 프리셋과 색상의 슬롯을 이 순서로 순환합니다.`,modalNoSlots:`필라멘트가 로드되지 않았습니다.`,modalNoPairs:`백업 쌍이 없습니다 — 프리셋과 색상이 모두 일치하는 슬롯이 없습니다.`,extruderRightShort:`우`,extruderLeftShort:`좌`,stateOn:`활성화됨`,stateOff:`비활성화됨`,stateUnknown:`이 프린터에서 지원되지 않음`},activeJobSlot:{title:`이 슬롯은 활성 인쇄의 필라멘트 {{n}}입니다`,ariaLabel:`활성 인쇄 슬롯 {{n}}`},expectedSlot:{title:`프린터가 이 슬롯의 필라멘트를 기다리고 있습니다`,ariaLabel:`요청된 필라멘트 슬롯 {{n}}`,label:`{{ams}} · 슬롯 {{slot}}`,external:`외부 스풀`},filaments:`필라멘트`,externalSpool:{hide:`외부 스풀 숨기기`,show:`외부 스풀 표시`},openCameraOverlay:`카메라 오버레이 열기`,openCameraWindow:`새 창에서 카메라 열기`,firmwareUpdateAvailable:`펌웨어 업데이트 가능: {{current}} → {{latest}}`,firmwareUpToDate:`펌웨어 {{version}} — 최신 상태`,firmwareUpdateButton:`업데이트`,plateDetection:{noPermission:`프린터를 업데이트할 권한이 없습니다`,enabledClick:`플레이트 확인 활성화됨 - 클릭하여 비활성화`,disabledClick:`플레이트 확인 비활성화됨 - 클릭하여 활성화`,manageCalibration:`플레이트 감지 캘리브레이션 관리`,calibrationRequired:`캘리브레이션 필요`,calibrationInstructions:`빌드 플레이트가 <strong>완전히 비어 있는지</strong> 확인한 후 캘리브레이션을 클릭하세요.`,calibrationDescription:`캘리브레이션은 빈 플레이트의 참조 이미지를 캡처합니다. 이후 확인 시 이 참조와 비교하여 객체를 감지합니다.`,calibrationTip:`<strong>팁:</strong> 다른 플레이트에 대해 최대 5개의 캘리브레이션을 저장할 수 있습니다. 확인 시 시스템이 자동으로 가장 잘 맞는 것을 사용합니다.`,plateEmpty:`플레이트가 비어 있는 것으로 보입니다`,objectsDetected:`플레이트에 객체가 감지되었습니다`,confidence:`신뢰도`,difference:`차이`,analysisPreview:`분석 미리보기:`,analysisLegend:`초록 박스 = 감지 영역, 빨간 오버레이 = 캘리브레이션과의 차이`,savedReferences:`저장된 참조 ({{count}}/{{max}})`,deleteReference:`참조 삭제`,labelPlaceholder:`라벨...`,clickToEdit:`{{label}} - 클릭하여 편집`,clickToAddLabel:`클릭하여 라벨 추가`},speed:{title:`인쇄 속도`,silent:`조용함 (50%)`,standard:`표준 (100%)`,sport:`스포츠 (124%)`,ludicrous:`루디크러스 (166%)`},airduct:{title:`에어덕트 모드`,cooling:`냉각`,heating:`가열`},noSdCard:`SD 없음`,door:{open:`열림`,closed:`닫힘`},fans:{partCooling:`파트 냉각 팬`,auxiliary:`보조 팬`,leftAuxiliary:`왼쪽 보조 팬`,exhaust:`배기`,chamber:`챔버 팬`},clickToViewHmsErrors:`HMS 오류 보기 클릭`,aiDetection:{safe:`안전`,warning:`경고`,failure:`실패`,idle:`대기 중`,error:`확인 안 함`,unknown:`시작 중`,tooltipError:`AI 실패 감지가 이 인쇄를 확인하고 있지 않습니다: {{reason}} - 클릭하여 자세히 보기`,tooltipUnknown:`AI 실패 감지: 첫 번째 결과를 기다리는 중 - 클릭하여 자세히 보기`,errorHint:`이 인쇄는 확인되고 있지 않습니다. 아래 문제가 해결되면 감지가 자동으로 재개됩니다.`,tooltip:`AI 실패 감지: {{status}} (점수 {{score}}) - 클릭하여 자세히 보기`,tooltipIdle:`AI 실패 감지 활성화됨 - 다음 인쇄부터 모니터링을 시작합니다 - 클릭하여 자세히 보기`,modalTitle:`AI 실패 감지 - {{name}}`,currentStatus:`상태`,score:`점수`,framesAnalyzed:`분석된 프레임`,idleHint:`현재 모니터링 중인 인쇄가 없습니다. 다음 인쇄부터 자동으로 모니터링을 시작합니다.`,lastError:`마지막 오류`,openSettings:`설정 열기`},estimatedCompletion:`예상 완료 시간`,plateNumber:`플레이트 {{number}}`,slotOptions:`슬롯 옵션`,amsPopup:{friendlyName:`AMS 이름`,friendlyNamePlaceholder:`예: AMS 친숙한 이름`,serialNumber:`일련번호`,firmwareVersion:`펌웨어`,save:`저장`,clear:`지우기`,noEditPermission:`AMS 유닛 이름을 변경할 권한이 없습니다`},firmwareModal:{title:`펌웨어 업데이트`,titleUpToDate:`펌웨어 정보`,currentVersion:`현재:`,latestVersion:`최신:`,releaseNotes:`릴리스 노트`,checkingPrereqs:`전제 조건 확인 중...`,sdCardReady:`SD 카드 준비됨. 아래를 클릭하여 펌웨어를 업로드하세요.`,uploadedSuccess:`SD 카드에 펌웨어가 업로드되었습니다!`,applyInstructions:`프린터에서 업데이트를 적용하려면:`,step1:`프린터 터치스크린에서 <strong>설정</strong>으로 이동하세요`,step2:`<strong>펌웨어</strong>로 이동하세요`,step3:`<strong>SD 카드에서 업데이트</strong>를 선택하세요`,step4:`업데이트에 10-20분이 소요됩니다`,done:`완료`,starting:`시작 중...`,uploadFirmware:`펌웨어 업로드`,uploadFailed:`업로드 시작 실패: {{error}}`,uploadedToast:`펌웨어 업로드됨! 프린터 화면에서 업데이트를 시작하세요.`,availableVersions:`사용 가능한 버전`,usable:`사용 가능`,unavailable:`사용 불가`,installed:`설치됨`,newerBadge:`최신`,olderBadge:`이전`,currentBadge:`현재`},accessCodePlaceholder:`현재 값을 유지하려면 비워두세요`,roi:{title:`감지 영역 (ROI)`,xStart:`X 시작`,yStart:`Y 시작`,width:`너비`,height:`높이`,instruction:`빌드 플레이트에 집중할 감지 영역을 조정하세요. 미리보기의 초록 박스가 현재 영역을 표시합니다.`},developerModeWarning:`개발자 LAN 모드가 활성화되지 않음: {{names}}. 일부 기능이 작동하지 않을 수 있습니다.`,howToEnable:`활성화 방법`,incompatibleFile:`이 파일은 {{slicedFor}}용으로 슬라이싱되었지만, 이 프린터는 {{printerModel}}입니다`,dropNotPrintable:`.gcode 및 .gcode.3mf 파일만 인쇄할 수 있습니다`,dropToPrint:`놓아서 인쇄`,dropToQueue:`놓아서 대기열에 추가`,addPreflight:{checking:`연결 확인 중...`,warning:`일부 연결 확인이 실패했습니다. 이 프린터가 오프라인으로 표시될 수 있습니다. 아래 항목을 검토하고 수정하거나 그냥 저장하세요.`,back:`뒤로`,saveAnyway:`그냥 저장`}},archives:{media:{title:`출력 동영상`,download:`출력 동영상 다운로드`,searching:`프린터에서 동영상을 확인하는 중…`,searchFailed:`프린터에서 동영상을 확인할 수 없습니다.`,none:`이 출력의 타임랩스 또는 IP 카메라 영상 조각을 찾지 못했습니다.`,attachedTimelapse:`첨부된 타임랩스`,printerFiles:`프린터에 남아 있는 파일`,downloadSelected:`선택 항목 다운로드`,printerMissing:`프린터가 더 이상 구성되어 있지 않습니다`,timelapseUnavailable:`타임랩스 디렉터리를 읽을 수 없습니다`,ipcamUnavailable:`IP 카메라 디렉터리를 읽을 수 없습니다`},title:`인쇄 아카이브`,no3mfBanner:{title:`최근 일부 인쇄가 썸네일과 함께 아카이브되지 않았습니다`,body:`슬라이서가 프린터의 SD 카드에 .gcode.3mf 파일을 남기지 않아서 Bambuddy가 썸네일이나 슬라이서 메타데이터를 가져올 수 없었습니다. 일반적으로 슬라이서 (Bambu Studio / OrcaSlicer 장치 탭)에서 "전송된 파일을 외부 저장소에 저장"이 꺼져 있을 때 발생합니다.`,docsLink:`설치 단계 4 보기`,docsLinkInternalStorage:`왜 이런 일이 생기나요`,titleInternalStorage:`최근 일부 출력물이 프린터 내부 저장소에 남았습니다`,bodyInternalStorage:`슬라이싱된 파일을 Bambu Studio가 카드가 아니라 프린터 내부 저장소에 저장해서 Bambuddy가 FTP로 읽을 것이 없었습니다. H2 시리즈, P2S, X2D에서는 «인쇄» 버튼이 항상 그렇게 동작하며, 선택할 수 있는 것은 «보내기»뿐인데 그것도 기본값이 «캐시»입니다. 해당 출력물은 이름과 시간과 함께 계속 보관되지만 썸네일과 슬라이서 메타데이터는 없습니다. 완전한 기록을 남기려면 Bambuddy에서 출력을 시작하거나 OrcaSlicer로 슬라이싱하세요. Bambu Studio를 쓴다면 «보내기»에서 «외부 저장소»를 고른 뒤 출력을 시작하면 됩니다. 모두 프린터에 카드나 USB 메모리가 필요합니다.`,titleNoExternalStorage:`최근 일부 출력물을 보관하지 못했습니다 — 프린터에 저장소가 없습니다`,bodyNoExternalStorage:`프린터 슬롯에 카드도 USB도 감지되지 않아 슬라이싱된 파일이 저장될 곳이 없었고 Bambuddy가 읽을 것도 없었습니다. 하나 넣으면 다음 출력물은 온전히 보관됩니다.`,titleInternalHistory:`최근 일부 출력물은 이미 프린터에 있던 파일에서 시작되었습니다`,bodyInternalHistory:`해당 출력물은 프린터 자체 라이브러리에서 실행되었습니다 — 화면에서의 재출력, Handy에서의 시작, 또는 이전에 보내 두고 나중에 출력한 파일입니다. Bambuddy는 출력 파일을 FTP로 읽는데 FTP는 카드나 USB만 제공하고, 프린터는 그 라이브러리를 FTP가 닿지 않는 영역에 보관하므로 읽을 3MF가 없었습니다. 이 출력물들은 아무것도 전송되지 않았으므로 슬라이서 설정으로는 해결되지 않습니다. 이름과 시간과 함께 계속 보관되며, "아카이브 편집"에서 사용된 필라멘트를 직접 입력할 수 있습니다. 온전한 보관을 원하면 Bambuddy나 슬라이서에서 출력을 시작하세요.`,titleFtpsCooloff:`최근 일부 출력물을 보관하지 못했습니다 — 프린터가 파일 연결을 거부했습니다`,bodyFtpsCooloff:`Bambuddy가 프린터의 파일 전송 포트(FTPS 990)를 열었으나 프린터가 TLS가 아닌 것으로 응답해 아무것도 읽을 수 없었습니다. 해당 출력물은 이름과 시간과 함께 보관되지만 미리보기와 슬라이서 메타데이터는 없습니다. 이는 슬라이서 설정 문제도, 사용자가 바꾼 것도 아닙니다. 같은 모델과 같은 펌웨어가 다른 설치 환경에서는 정상 동작하며, 문제가 생긴 프린터도 대개 나중에 저절로 다시 동작합니다. 이런 실패 후 Bambuddy는 해당 프린터로의 전송을 5분간 멈추고, 그 후 파일을 다시 가지러 갑니다. 짧은 문제라면 스스로 채워지고, 카드가 계속 비어 있다면 거부가 재시도보다 오래 지속되었다는 뜻입니다. 무엇이 원인인지는 아직 밝혀지지 않았습니다. 반복된다면 시스템 페이지에서 디버그 로깅을 켠 뒤 지원 번들을 보고에 첨부해 주세요.`,titleFtpTransferFailed:`최근 일부 출력을 보관하지 못했습니다 — 파일 전송이 시간 내에 끝나지 않았습니다`,bodyFtpTransferFailed:`슬라이싱된 파일은 프린터 카드에 있었고 프린터도 실제로 전송을 시작했지만, 허용된 시간 안에 전송이 끝나지 않았습니다. 출력 시작 시점의 프린터는 카메라와 상태 메시지, 작업 업로드까지 함께 처리하고 있어서 큰 3MF 파일은 그 사이를 통과하지 못할 때가 있습니다. 해당 출력은 이름과 시간과 함께 보관되어 있고, 썸네일과 슬라이서 정보만 없습니다. 슬라이서 설정 문제도 아니고 사용자가 바꾼 것 때문도 아닙니다. Bambuddy가 이후 10분 동안 파일을 세 번 더 가지러 가므로 대부분은 저절로 채워집니다. 카드가 계속 비어 있다면 그 시도들도 모두 시간 내에 끝나지 않았다는 뜻입니다. 계속 발생하면 설정 > 네트워크 > FTP 재시도 의 연결 제한 시간을 늘리세요.`,dismissLabel:`이 알림 닫기`},searchPlaceholder:`아카이브 검색...`,filterByPrinter:`프린터별 필터`,filterByStatus:`상태별 필터`,sortBy:`정렬 기준`,sortNewest:`최신순`,sortOldest:`오래된순`,sortName:`이름`,sortDuration:`시간`,sortLargest:`큰 것 먼저`,sortSmallest:`작은 것 먼저`,sortSize:`크기`,noArchives:`아카이브를 찾을 수 없습니다`,noArchivesSearch:`검색 조건에 맞는 아카이브가 없습니다`,originalPrintNotVisible:`원본 인쇄가 보이지 않음 - 필터를 지워보세요`,noArchivesYet:`아직 아카이브가 없습니다`,prints:`인쇄`,pagination:{showing:`표시 중`,to:`~`,of:`/`,show:`표시`,page:`페이지`,all:`전체`},loadingArchives:`아카이브 로딩 중...`,releaseToUpload:`놓아서 업로드`,showAll:`모두 보기`,showFavoritesOnly:`즐겨찾기만 보기`,gridView:`그리드 보기`,listView:`목록 보기`,calendarView:`달력 보기`,logView:`인쇄 로그`,manageTags:`태그 관리`,showFailedPrints:`실패한 인쇄 표시`,hideFailedPrints:`실패한 인쇄 숨기기`,hideDuplicates:`중복 숨기기`,viewOriginalPrint:`원본 인쇄 보기 클릭 (#{{id}})`,printTime:`인쇄 시간`,filamentUsed:`사용된 필라멘트`,cost:`비용`,preview:`미리보기`,deleteArchive:`아카이브 삭제`,deleteConfirm:`이 아카이브를 삭제하시겠습니까?`,favorite:`즐겨찾기`,unfavorite:`즐겨찾기에서 제거`,viewDetails:`상세 보기`,status:{completed:`완료`,failed:`실패`,stopped:`정지됨`},toast:{source3mfAttached:`소스 3MF 첨부됨: {{filename}}`,failedUploadSource3mf:`소스 3MF 업로드 실패`,source3mfRemoved:`소스 3MF 제거됨`,failedRemoveSource3mf:`소스 3MF 제거 실패`,f3dAttached:`F3D 첨부됨: {{filename}}`,failedUploadF3d:`F3D 업로드 실패`,f3dRemoved:`F3D 제거됨`,failedRemoveF3d:`F3D 제거 실패`,timelapseAttached:`타임랩스 첨부됨: {{filename}}`,timelapseAlreadyAttached:`타임랩스가 이미 첨부됨`,noMatchingTimelapse:`일치하는 타임랩스를 찾을 수 없습니다`,failedScanTimelapse:`타임랩스 스캔 실패`,failedAttachTimelapse:`타임랩스 첨부 실패`,timelapseRemoved:`타임랩스 제거됨`,failedRemoveTimelapse:`타임랩스 제거 실패`,timelapseUploaded:`타임랩스 업로드됨: {{filename}}`,failedUploadTimelapse:`타임랩스 업로드 실패`,archiveDeleted:`아카이브가 삭제되었습니다`,failedDeleteArchive:`아카이브 삭제 실패`,addedToFavorites:`즐겨찾기에 추가됨`,removedFromFavorites:`즐겨찾기에서 제거됨`,projectUpdated:`프로젝트가 업데이트되었습니다`,failedUpdateProject:`프로젝트 업데이트 실패`,linkCopied:`링크가 클립보드에 복사되었습니다`,failedCopyLink:`링크 복사 실패`,photoDeleted:`사진이 삭제되었습니다`,failedDeletePhoto:`사진 삭제 실패`,failedDeleteArchives:`아카이브 삭제 실패`,failedUpdateFavorites:`즐겨찾기 업데이트 실패`,exportDownloaded:`내보내기 다운로드됨`,exportFailed:`내보내기 실패`},menu:{print:`인쇄`,openInBambuStudio:`슬라이서에서 열기`,slice:`슬라이스`,externalLink:`외부 링크`,viewOnMakerWorld:`MakerWorld에서 보기`,preview3d:`3D 미리보기`,viewTimelapse:`타임랩스 보기`,scanForTimelapse:`타임랩스 검색`,uploadTimelapse:`타임랩스 업로드`,removeTimelapse:`타임랩스 제거`,downloadSource3mf:`소스 3MF 다운로드`,uploadSource3mf:`소스 3MF 업로드`,replaceSource3mf:`소스 3MF 교체`,removeSource3mf:`소스 3MF 제거`,uploadF3d:`F3D 업로드`,replaceF3d:`F3D 교체`,downloadF3d:`F3D 다운로드`,removeF3d:`F3D 제거`,download:`다운로드`,copyDownloadLink:`다운로드 링크 복사`,qrCode:`QR 코드`,viewPhotos:`사진 보기`,viewPhotosCount:`사진 보기 ({{count}})`,projectPage:`프로젝트 페이지`,addToFavorites:`즐겨찾기에 추가`,removeFromFavorites:`즐겨찾기에서 제거`,edit:`편집`,goToProject:`프로젝트로 이동: {{name}}`,addToProject:`프로젝트에 추가`,removeFromProject:`프로젝트에서 제거`,loading:`로딩 중...`,noProjectsAvailable:`사용 가능한 프로젝트 없음`,searchProjects:`프로젝트 검색…`,select:`선택`,deselect:`선택 해제`,delete:`삭제`,printLog:`인쇄 기록`},permission:{noReprint:`이 아카이브를 재인쇄할 권한이 없습니다`,noAddToQueue:`대기열에 추가할 권한이 없습니다`,noUpdateArchives:`아카이브를 업데이트할 권한이 없습니다`,noUploadFiles:`파일을 업로드할 권한이 없습니다`,noDownload:`아카이브를 다운로드할 권한이 없습니다`,noCopyLink:`다운로드 링크를 복사할 권한이 없습니다`,noDelete:`이 아카이브를 삭제할 권한이 없습니다`,noEdit:`이 항목을 편집할 권한이 없습니다`,noCreate:`아카이브를 만들 권한이 없습니다`},platePicker:{title:`미리 볼 플레이트 선택`,hint:`이 아카이브에는 여러 플레이트가 있습니다. G코드 뷰어에서 열 플레이트를 선택하세요.`,plateLabel:`플레이트 {{index}}`,objectCount:`{{count}}개 객체`,objectCount_plural:`{{count}}개 객체`,noGcode:`이 아카이브에는 미리 볼 슬라이싱된 G코드가 없습니다. Bambu Studio에서 먼저 슬라이싱하세요.`},card:{previousPlate:`이전 플레이트`,nextPlate:`다음 플레이트`,plateNumber:`플레이트 {{index}}`,moreOptions:`더 많은 옵션은 우클릭`,addToFavorites:`즐겨찾기에 추가`,removeFromFavorites:`즐겨찾기에서 제거`,cancelled:`취소됨`,failed:`실패`,duplicate:`중복`,duplicateTitle:`이 모델은 이전에 인쇄된 적이 있습니다`,openSource3mf:`Bambu Studio에서 소스 3MF 열기 (더 많은 옵션은 우클릭)`,downloadF3d:`Fusion 360 디자인 파일 다운로드`,viewTimelapse:`타임랩스 보기`,viewPhoto:`사진 1장 보기`,viewPhotos:`사진 {{count}}장 보기`,openFolder:`폴더 열기: {{name}}`,slicedFile:`슬라이싱된 파일 - 인쇄 준비 완료`,sourceFile:`소스 파일만 - AMS 매핑 없음`,gcode:`GCODE`,source:`소스`,project:`프로젝트: {{name}}`,estimated:`예상: {{time}}`,actual:`실제: {{time}}`,accuracy:`정확도: {{percent}}%`,filament:`{{weight}}g`,layer:`{{count}}층`,layers:`{{count}}층`,object:`{{count}}개 객체`,objects:`{{count}}개 객체`,slicedFor:`{{model}}용으로 슬라이싱됨`,uploadedBy:`업로드한 사용자`,noPermissionReprint:`재인쇄 권한이 없습니다`,noFileForReprint:`3MF 파일 없음 — 인쇄 기록 시 프린터에서 파일을 다운로드할 수 없었습니다`,slicerAmsMapping:`AMS 매핑 저장됨({{printer}})`,slicerAmsMappingTooltip:`슬라이서가 선택한 AMS 슬롯이 {{printer}}용으로 저장되었습니다. 슬롯 번호는 해당 프린터에서만 의미가 있으므로, 다시 {{printer}}로 보낼 때만 재인쇄에서 재사용됩니다.`,noPermissionEdit:`아카이브를 편집할 권한이 없습니다`,noPermissionDelete:`아카이브를 삭제할 권한이 없습니다`,openInBambuStudio:`슬라이서에서 열기`,openInBambuStudioToSlice:`슬라이스하려면 슬라이서에서 열기`,slice:`슬라이스`,externalLink:`외부 링크`,makerWorld:`MakerWorld: {{designer}}`,viewProject:`프로젝트 보기`,noExternalLink:`외부 링크 없음`,preview3d:`3D 미리보기`,download:`다운로드`,edit:`편집`,delete:`삭제`,runsBadge:`{{count}}회 인쇄`,runsBadgeTitle:`총 {{count}}회 인쇄 — {{successful}}회 성공, {{failed}}회 실패. 전체 인쇄 기록을 보려면 클릭하세요.`},modal:{deleteArchive:`아카이브 삭제`,deleteConfirm:`"{{name}}"을(를) 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.`,deleteButton:`삭제`,removeSource3mf:`소스 3MF 제거`,removeSource3mfConfirm:`"{{name}}"에서 소스 3MF 파일을 제거하시겠습니까? 원본 슬라이서 프로젝트 파일이 삭제됩니다.`,removeButton:`제거`,removeF3d:`F3D 제거`,removeF3dConfirm:`"{{name}}"에서 Fusion 360 디자인 파일을 제거하시겠습니까?`,removeTimelapse:`타임랩스 제거`,removeTimelapseConfirm:`"{{name}}"에서 타임랩스 영상을 제거하시겠습니까?`,timelapse:`{{name}} - 타임랩스`,selectTimelapse:`타임랩스 선택`,selectTimelapseDesc:`자동 일치 항목 없음. 이 인쇄의 타임랩스를 선택하세요:`,deleteArchives:`아카이브 삭제`,deleteArchivesConfirm:`{{count}}개 아카이브를 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.`,deleteCount:`{{count}}개 삭제`,deletePurgeStats:`빠른 통계에서도 이 인쇄 항목 제거 (필라멘트, 시간, 비용, 에너지)`,deleteQueueItemsWarning:`이 아카이브와 연결된 {{count}}개의 대기열 항목도 함께 제거됩니다.`,deleteBlockedByPrinting:`삭제할 수 없습니다 — {{count}}개의 대기열 항목이 현재 인쇄 중입니다. 인쇄를 먼저 중지한 다음 다시 시도하십시오.`},page:{title:`아카이브`,printsCount:`{{total}}개 중 {{filtered}}개 인쇄`,dropFilesHere:`.3mf 파일을 여기에 놓으세요`,releaseToUpload:`놓아서 업로드`,only3mfSupported:`.3mf 파일만 지원됩니다`,close:`닫기`,selected:`{{count}}개 선택됨`,selectAll:`전체 선택`,tags:`태그`,project:`프로젝트`,favorite:`즐겨찾기`,delete:`삭제`,toggledFavorites:`{{count}}개 아카이브의 즐겨찾기가 변경됨`,failedUpdateFavorites:`즐겨찾기 업데이트 실패`,archivesDeleted:`{{count}}개 아카이브가 삭제됨`,failedDeleteArchives:`아카이브 삭제 실패`,photoDeleted:`사진이 삭제됨`,failedDeletePhoto:`사진 삭제 실패`},list:{name:`이름`,printer:`프린터`,date:`날짜`,size:`크기`,actions:`작업`,hasTimelapse:`타임랩스 있음`},log:{date:`날짜`,printName:`인쇄 이름`,printer:`프린터`,user:`사용자`,status:`상태`,duration:`소요 시간`,filament:`필라멘트`,filamentUsed:`사용 필라멘트량`,cost:`비용`,energy:`전력량`,energyCost:`전력 비용`,completedAt:`완료`,columns:`열`,sortBy:`{{column}} 기준 정렬`,allPrinters:`모든 프린터`,allUsers:`모든 사용자`,allStatuses:`모든 상태`,cancelled:`취소됨`,skipped:`건너뜀`,dateFrom:`시작`,dateTo:`종료`,noEntries:`인쇄 로그 항목이 없습니다`,showing:`{{total}}개 중 {{count}}개 표시`,rowsPerPage:`행`,page:`페이지`,prev:`이전`,next:`다음`,clearLog:`로그 지우기`,clearLogTitle:`인쇄 로그 지우기`,clearLogConfirm:`모든 인쇄 로그 항목이 영구적으로 삭제됩니다. 아카이브와 대기열 항목은 영향받지 않습니다. 이 작업은 취소할 수 없습니다. 계속하시겠습니까?`,clearLogButton:`모두 지우기`,cleared:`{{count}}개 로그 항목이 지워졌습니다`,clearFailed:`인쇄 로그 지우기 실패`,deleteEntryTitle:`인쇄 로그 항목 삭제`,deleteEntryConfirm:`이 항목이 로그에서 삭제되며 필라멘트, 시간 및 비용 기여도가 빠른 통계에서 제외됩니다. 해당 아카이브(있는 경우)는 영향을 받지 않습니다. 이 작업은 취소할 수 없습니다.`,entryDeleted:`인쇄 로그 항목이 삭제되었습니다`,entryDeleteFailed:`인쇄 로그 항목 삭제 실패`,editEntryTitle:`인쇄 로그 항목 편집`,editEntryDescription:`이 인쇄를 분류합니다. 실패 분석 위젯이 이 값으로 그룹화하므로 업데이트가 통계에 즉시 반영됩니다.`,entryUpdated:`인쇄 로그 항목이 업데이트되었습니다`,entryUpdateFailed:`인쇄 로그 항목 업데이트 실패`,statuses:{completed:`완료됨`,failed:`실패`,stopped:`중지됨`,cancelled:`취소됨`,skipped:`건너뜀`}},runLog:{title:`인쇄 기록`,modalTitle:`인쇄 기록 — {{name}}`,modalTitleFallback:`이 아카이브`,empty:`이 아카이브에 대해 기록된 인쇄 이벤트가 없습니다.`,col:{date:`날짜`,status:`상태`,duration:`소요 시간`,filament:`필라멘트`,cost:`비용`},status:{completed:`완료`,failed:`실패`,cancelled:`취소됨`,stopped:`중지됨`,skipped:`건너뜀`,printing:`인쇄 중`}}},dispatchToast:{untitled:`인쇄 작업`,startingPrints:`인쇄 시작 중`,progressSummary:`{{complete}}/{{total}} 완료 • 처리 중: {{processing}}`,expandDetails:`디스패치 세부 정보 펼치기`,collapseDetails:`디스패치 세부 정보 접기`,awaitingPrinter:`프린터 응답 대기 중…`,status:{processing:`처리 중`,completed:`완료`,failed:`실패`},failed:{generic:`디스패치 실패`,upload_failed:`프린터로 업로드 실패`,start_command_failed:`프린터가 시작 명령을 거부했습니다`},dismiss:`닫기`},pipelineRuns:{title:`파이프라인 실행`,loading:`불러오는 중…`,empty:`아직 파이프라인 실행이 없습니다.`,filter:{pipeline:`파이프라인`,status:`상태`,target:`대상`,all:`전체`,allPipelines:`모든 파이프라인`,allStatus:`모든 상태`,allTargets:`모든 대상`,clear:`필터 지우기`,noMatches:`현재 필터와 일치하는 실행이 없습니다.`},totalCount_one:`{{n}}회 실행`,totalCount_other:`{{n}}회 실행`,copies:`사본 {{n}}`,failedCount:`실패 {{n}}`,copyN:`사본 {{n}}`,retryFailed:`실패 재시도`,retryOf:`#{{n}}의 재시도`,pagination:`{{total}} 중 {{start}}–{{end}}`,toast:{cancelled:`실행 취소됨`,cancelFailed:`취소 실패`,retryStarted:`재시도 시작됨`,retryFailed:`재시도 실패`,cleared:`{{n}}회 실행 삭제됨`,clearFailed:`삭제 실패`},clearLog:`로그 지우기`,clearConfirmTitle:`로그를 지울까요?`,clearConfirmBody:`완료, 실패, 취소, 부분 실패한 모든 파이프라인 실행을 삭제합니까? 진행 중인 실행은 유지됩니다. 되돌릴 수 없습니다.`,clearConfirmAction:`지우기`,jobStatus:{pending:`대기 중`,awaiting_printer:`프린터 대기 중`,queued:`대기 중`,printing:`인쇄 중`,completed:`완료됨`,failed:`실패`,cancelled:`취소됨`},cancelledByUser:`사용자에 의해 취소됨`},queue:{title:`인쇄 대기열`,subtitle:`인쇄 작업을 예약하고 관리하세요`,editQueueItem:`대기열 항목 편집`,selectAllPlates:`{{count}}개 플레이트 전체 선택`,deselectAll:`전체 해제`,printQueued:`인쇄가 대기열에 추가됨`,printQueuedWillStartWhenIdle:`프린터가 유휴 상태가 되면 시작됩니다`,itemsQueued:`{{count}}개 항목이 대기열에 추가됨`,sending:`전송 중...`,sendingProgress:`{{current}}/{{total}} 전송 중...`,adding:`추가 중...`,addingProgress:`{{current}}/{{total}} 추가 중...`,savingProgress:`{{current}}/{{total}} 저장 중...`,clearQueue:`대기열 지우기`,clearHistory:`기록 지우기`,emptyQueue:`대기열이 비어 있습니다`,position:`위치`,scheduledTime:`예약 시간`,moveUp:`위로 이동`,moveDown:`아래로 이동`,startNow:`지금 시작`,printingInProgress:`인쇄 중...`,viewArchive:`아카이브 보기`,viewInFileManager:`파일 관리자에서 보기`,itemCount:`{{count}}개 항목`,itemCount_plural:`{{count}}개 항목`,dragToReorder:`드래그하여 순서 변경 (즉시만)`,reorderHint:`위치는 즉시 항목에만 영향을 줍니다. 예약된 항목은 설정된 시간에 실행됩니다.`,sjf:{label:`SJF`,tooltip:`최단 작업 우선 — 스케줄러가 짧은 인쇄를 우선합니다`},addedBy:`{{name}}님이 추가함`,nextInQueue:`다음 대기`,clearPlateSuccess:`플레이트 비워짐 — 다음 인쇄 준비 완료`,plateNumber:`플레이트 {{index}}`,quantity:`수량`,quantityHint:`{{count}}개 대기열 항목 생성`,plateQuantityLabel:`{{plate}} 실행 횟수`,plateQuantityTotal_one:`총 {{count}}회`,plateQuantityTotal_other:`총 {{count}}회`,batchOrders:{title:`배치 주문`,emptyTitle:`배치 주문 없음`,emptyDescription:`여러 플레이트 파일이나 한 플레이트의 여러 복사본을 대기열에 넣으면 주문이 진행 상황과 함께 여기에 표시됩니다.`,filter:{active:`진행 중`,completed:`완료`,cancelled:`취소됨`,all:`전체`},status:{active:`진행 중`,completed:`완료`,cancelled:`취소됨`},noTargets:`그룹만`,noTargetsHint:`플레이트별 목표 수량이 도입되기 전에 생성되어 목표가 아닌 대기열에 넣은 실행을 추적합니다.`,dispatchRemaining:`남은 {{count}}개 대기열 추가`,dispatchPlate:`남은 항목 추가`,strandedPlate:`설정을 복사할 실행이 없습니다`,strandedNotice:`아직 남은 {{owed}}건 중 {{runs}}건을 대기열에 추가할 수 없습니다. 해당 플레이트에는 설정을 복사할 대기 중이거나 완료된 실행이 남아 있지 않습니다. 파일에서 해당 플레이트를 한 번 대기열에 추가하거나 주문을 취소하세요.`,dispatched:`{{name}}의 남은 실행을 대기열에 추가했습니다`,plateProgress:`{{target}}개 중 {{completed}}개 완료`,remaining:`{{count}}개 남음`,failed:`{{count}}개 실패`,printing:`{{count}}개 인쇄 중`,wholeFile:`파일 전체`,due:`기한 {{date}}`,costSoFar:`현재까지 {{amount}}`,costRemaining:`({{amount}} 남음)`},activeBatches:`활성 배치`,batchProgress:`{{total}}개 중 {{completed}}개 완료`,cancelBatch:`나머지 취소`,batchCancelled:`남은 배치 항목이 취소되었습니다`,cancelBatchConfirmTitle:`배치 취소`,cancelBatchConfirmMessage:`이 주문을 종료할까요? 대기열에 남은 실행은 취소되고, 생산하지 못한 분량도 더 이상 요구하지 않습니다.`,batch:{defaultName:`배치`,label:`{{count}}개 항목`,label_plural:`{{count}}개 항목`,pendingCount:`{{count}}개 대기 중`,pendingCount_plural:`{{count}}개 대기 중`,expand:`배치 펼치기`,collapse:`배치 접기`,groupAsBatch:`배치로 묶기…`,groupAsBatchDescription:`선택한 {{count}}개 항목을 접을 수 있는 하나의 배치로 묶습니다.`,nameLabel:`배치 이름`,namePlaceholder:`예: 금요일 선물`,create:`배치 만들기`,ungroup:`그룹 해제`,ungroupConfirmTitle:`배치 그룹을 해제하시겠습니까?`,ungroupConfirmMessage:`항목은 큐에 남아 있지만 더 이상 함께 그룹화되지 않습니다.`,dragGroup:`그룹 드래그`},tabs:{batches:`배치`,queue:`큐`,history:`기록`,timeline:`타임라인`,pipelines:`파이프라인`},layout:{flatList:`목록`,byPrinter:`프린터별`,groupByPrinter:`프린터별로 묶기`},history:{emptyTitle:`아직 기록이 없습니다`,emptyDescription:`완료·취소·실패한 인쇄가 여기에 표시됩니다.`,showMore:`더 보기`,showingCount:`{{total}}개 중 {{shown}}개 표시`},dragGhost:{multiCount:`{{count}}개 항목`,batch:`{{name}} ({{count}}부)`,batch_plural:`{{name}} ({{count}}부)`},sections:{currentlyPrinting:`현재 인쇄 중`,queued:`대기 중`,history:`기록`},status:{pending:`대기 중`,waiting:`기다리는 중`,printing:`인쇄 중`,paused:`일시정지`,completed:`완료`,failed:`실패`,skipped:`건너뜀`,cancelled:`취소됨`},summary:{printing:`인쇄 중`,queued:`대기 중`,totalTime:`총 대기열 시간`,totalWeight:`총 대기열 무게`,history:`기록`},filter:{allPrinters:`모든 프린터`,unassigned:`미할당`,allStatus:`모든 상태`,allLocations:`모든 위치`,any:`전체`},sort:{byPosition:`위치별 정렬`,byName:`이름별 정렬`,byPrinter:`프린터별 정렬`,bySchedule:`예약별 정렬`,byDate:`날짜별 정렬`,ascendingOldest:`오름차순 (오래된 것 먼저)`,descendingNewest:`내림차순 (최신 것 먼저)`},badges:{staged:`준비됨`,requiresPrevious:`이전 성공 필요`,autoPowerOff:`자동 전원 끄기`,gcodeInjection:`G코드`},empty:{title:`예약된 인쇄 없음`,description:`아카이브 페이지의 컨텍스트 메뉴에서 "예약" 옵션을 사용하거나 파일을 드래그 앤 드롭하여 시작하세요.`},time:{etaIfStartedNow:`이 작업을 지금 시작할 경우의 완료 예정 시각`,whenFree:`프린터가 사용 가능해지면`,overdue:`기한 초과`,now:`지금`,lessThanMinute:`1분 이내`,inMinutes:`{{count}}분 후`,inHours:`{{count}}시간 후`},actions:{startPrint:`인쇄 시작`,stopPrint:`인쇄 정지`,requeue:`재대기`},bulkEdit:{title:`{{count}}개 항목 편집`,title_plural:`{{count}}개 항목 편집`,description:`변경된 설정만 선택된 항목에 적용됩니다.`,printer:`프린터`,noChange:`— 변경 없음 —`,queueOptions:`대기열 옵션`,staged:`준비됨 (수동 시작)`,autoPowerOff:`인쇄 후 자동 전원 끄기`,requirePrevious:`이전 성공 필요`,gcodeInjection:`G코드 삽입`,printOptions:`인쇄 옵션`,bedLevelling:`베드 레벨링`,flowCalibration:`유량 캘리브레이션`,vibrationCalibration:`진동 캘리브레이션`,layerInspection:`첫 번째 층 검사`,timelapse:`타임랩스`,useAms:`AMS 사용`,nozzleOffsetCali:`노즐 오프셋 보정`,applyChanges:`변경사항 적용`,selectAll:`전체 선택`,deselectAll:`전체 해제`,selected:`{{count}}개 선택됨`,editSelected:`선택 항목 편집`,cancelSelected:`선택 항목 취소`},confirm:{cancelTitle:`예약된 인쇄 취소`,cancelMessage:`"{{name}}"을(를) 취소하시겠습니까?`,stopTitle:`인쇄 정지`,stopMessage:`"{{name}}"의 현재 인쇄를 정지하시겠습니까? 프린터의 인쇄 작업이 취소됩니다.`,removeTitle:`기록에서 제거`,removeMessage:`대기열 기록에서 "{{name}}"을(를) 제거하시겠습니까?`,clearHistoryTitle:`기록 지우기`,clearHistoryMessage:`기록에서 {{count}}개 항목을 모두 제거하시겠습니까?`,cancelButton:`인쇄 취소`,stopButton:`인쇄 정지`,thisPrint:`이 인쇄`,thisItem:`이 항목`},toast:{cancelled:`대기열 항목이 취소되었습니다`,cancelFailed:`항목 취소 실패`,removed:`대기열 항목이 제거되었습니다`,keptForOrder:`제거 대신 취소했습니다: 배치 주문이 이 플레이트를 다시 대기열에 넣을 수 있는 유일한 실행입니다`,historyKeptForOrders:`배치 주문에 아직 필요한 {{kept}}건은 남겨 두었습니다.`,removeFailed:`항목 제거 실패`,stopped:`인쇄가 정지되었습니다`,stopFailed:`인쇄 정지 실패`,released:`인쇄가 대기열에 릴리스되었습니다`,startFailed:`인쇄 시작 실패`,reorderFailed:`대기열 순서 변경 실패`,historyCleared:`{{count}}개 기록 항목이 지워졌습니다`,clearHistoryFailed:`기록 지우기 실패`,updateFailed:`항목 업데이트 실패`,bulkCancelled:`{{count}}개 항목이 취소되었습니다`,bulkCancelFailed:`항목 취소 실패`,batchCreated:`"{{name}}" 배치를 만들었습니다`,batchCreateFailed:`배치 만들기에 실패했습니다`,batchUngrouped:`{{count}}개 항목의 그룹을 해제했습니다`,batchUngroupFailed:`배치 그룹 해제에 실패했습니다`,resumedAfterFailure:`큐를 재개했습니다 — {{restored}}개 작업을 대기 상태로 복원했습니다`,resumeAfterFailureFailed:`큐 재개에 실패했습니다`},resumeAfterFailure:{banner:`{{printer}}이(가) 이전 인쇄 실패로 인해 차단되었습니다 — {{count}}개 작업이 건너뛰어졌습니다`,bannerHint:`프린터 문제를 해결한 후 재개하여 건너뛴 작업을 복원하고 차단을 해제하세요.`,button:`실패 후 재개`,confirmTitle:`실패 후 큐를 재개하시겠습니까?`,confirmMessage:`{{printer}}에서 건너뛴 {{count}}개 작업을 대기 상태로 복원하고 이전 인쇄 차단을 해제합니다. 계속하기 전에 프린터가 준비되었는지 확인하세요.`},timeline:{listView:`목록`,timelineView:`타임라인`,unassigned:`미할당`,noData:`이 날에 예약된 인쇄 없음`,nothingCommitted:`이 시간 창에 확정된 일정이 없습니다. 대기 중인 항목, 보류된 항목, 유휴 프린터의 ASAP 작업은 표시되지 않습니다 — 예약 시간을 설정하거나 대기 항목을 릴리스하면 여기에 표시됩니다.`,allDoneBy:`모든 인쇄 예상 완료 시간: {{time}}`,staged:`준비됨`,filterAll:`모두 표시`,filterPrinting:`인쇄 중`,filterQueued:`대기 중`,time:{anyMoment:`잠시 후`,minutesLeft:`{{minutes}}분 남음`,hoursLeft:`{{hours}}시간 남음`,hoursMinutesLeft:`{{hours}}시간 {{minutes}}분 남음`},day:{previous:`이전 날`,next:`다음 날`,today:`오늘`},window:{back12h:`12시간 이전`,forward12h:`12시간 이후`,now:`지금`},printerColumnHeader:`프린터`},permissions:{noStopPrint:`인쇄를 정지할 권한이 없습니다`,noStartPrint:`인쇄를 시작할 권한이 없습니다`,noEdit:`이 대기열 항목을 편집할 권한이 없습니다`,noCancel:`이 대기열 항목을 취소할 권한이 없습니다`,noRequeue:`항목을 재대기할 권한이 없습니다`,noRemove:`이 대기열 항목을 제거할 권한이 없습니다`,noClearHistory:`모든 기록을 지울 권한이 없습니다`,noEditItems:`대기열 항목을 편집할 권한이 없습니다`,noCancelItems:`대기열 항목을 취소할 권한이 없습니다`},filamentShort:{rowBadge:`할당된 스풀의 필라멘트가 부족합니다`,rowTooltip:`디스패치 스케줄러가 이 항목을 표시했습니다. 재생 버튼을 클릭하여 슬롯별 부족량을 확인하고 인쇄 여부를 결정하세요.`,confirmTitle:`필라멘트 부족`,confirmIntro:`할당된 스풀이 하나 이상의 슬롯을 채울 수 없습니다. 그래도 인쇄하시겠습니까?`,lineItem:`슬롯 {{slot}}: {{required}}g 필요, {{remaining}}g 남음`,unknown:`알 수 없음`,printAnyway:`그냥 인쇄`},slicerAmsMapping:{rowBadge:`이 프린터용으로 저장된 AMS 슬롯`,rowTooltip:`이 아카이브에는 슬라이서가 선택한 정확한 AMS 슬롯이 이 항목의 대상 프린터용으로 저장되어 있습니다. 해당 프린터에서 재인쇄하면 유형과 색상으로 다시 맞추는 대신 그 트레이를 재사용할 수 있습니다.`}},stats:{title:`대시보드`,subtitle:`위젯을 드래그하여 정렬하세요. 눈 아이콘을 클릭하여 숨기세요.`,overview:`개요`,totalPrints:`총 인쇄 수`,successRate:`성공률`,totalPrintTime:`총 인쇄 시간`,printTime:`인쇄 시간`,totalFilament:`총 사용 필라멘트`,filamentUsed:`사용된 필라멘트`,filamentCost:`필라멘트 비용`,totalCost:`총 비용`,energyUsed:`사용된 에너지`,energyCost:`에너지 비용`,energyWarmingUpTooltip:`에너지 추적이 시간별 스냅샷을 수집 중입니다. 날짜 범위 합계는 선택한 범위 이전에 하나 이상의 스냅샷이 존재하면 정확해집니다. 초기 값이 적게 집계될 수 있습니다.`,averagePrintTime:`평균 인쇄 시간`,printsPerDay:`일일 인쇄 수`,byPrinter:`프린터별`,printsByPrinter:`프린터별 인쇄`,byMaterial:`재료별`,byMonth:`월별`,last7Days:`최근 7일`,last30Days:`최근 30일`,last90Days:`최근 90일`,allTime:`전체 기간`,quickStats:`빠른 통계`,printActivity:`인쇄 활동`,filamentTypes:`필라멘트 종류`,filamentTrends:`필라멘트 추세`,failureAnalysis:`실패 분석`,timeAccuracy:`시간 정확도`,successful:`성공:`,failed:`실패:`,cancelled:`취소됨:`,perfectEstimate:`100% = 완벽한 예상`,noTimeAccuracyData:`아직 시간 정확도 데이터 없음`,noFilamentData:`필라멘트 데이터 없음`,noPrinterData:`프린터 데이터 없음`,noPrintData:`인쇄 데이터 없음`,noPrintDataLast30Days:`최근 30일 인쇄 데이터 없음`,failureReasons:`실패 원인`,topFailureReasons:`주요 실패 원인`,failedPrintsCount:`{{total}}개 인쇄 중 {{failed}}개 실패`,lastWeekRate:`지난 주: {{rate}}%`,resetLayout:`레이아웃 초기화`,recalculateCosts:`비용 재계산`,recalculateCostsHint:`현재 필라멘트 가격으로 모든 아카이브 비용 재계산`,exportStats:`통계 내보내기`,exportAsCsv:`CSV로 내보내기`,exportAsExcel:`Excel로 내보내기`,hiddenCount:`{{count}}개 숨겨짐`,exportDownloaded:`내보내기 다운로드됨`,exportFailed:`내보내기 실패`,layoutReset:`레이아웃이 초기화되었습니다`,recalculatedCosts:`{{count}}개 아카이브의 비용이 재계산되었습니다`,recalculateFailed:`비용 재계산 실패`,loadingStats:`통계 로딩 중...`,noPermissionResetLayout:`레이아웃을 초기화할 권한이 없습니다`,noPermissionRecalculate:`비용을 재계산할 권한이 없습니다`,noPrintDataInRange:`선택한 범위에 인쇄 데이터 없음`,periodFilament:`기간 필라멘트`,periodCost:`기간 비용`,avgPerPrint:`인쇄당 평균`,usageOverTime:`시간별 사용량`,energyOverTime:`시간별 에너지 사용량`,filamentByWeight:`무게`,printDuration:`인쇄 시간`,printerUtilization:`프린터 사용률`,filamentSuccess:`재료별 성공률`,printHabits:`인쇄 습관`,printTimeOfDay:`시간대별 인쇄`,colorDistribution:`색상 분포`,noColorData:`색상 데이터 없음`,records:`기록`,longestPrint:`최장 인쇄`,heaviestPrint:`가장 무거운 인쇄`,mostExpensivePrint:`가장 비싼 인쇄`,busiestDay:`가장 바쁜 날`,successStreak:`연속 성공`,streakPrint:`연속 인쇄`,streakPrints:`{{count}}번 연속 인쇄`,printerStats:`프린터 통계`,hours:`시간`,avgPrints:`평균 인쇄`,noArchiveData:`인쇄 데이터 없음`,filamentByTime:`시간`,avgWeight:`평균 무게`,avgTime:`평균 시간`,filamentByPrints:`인쇄`,timeframe:{today:`오늘`,"this-week":`이번 주`,"this-month":`이번 달`,"last-7":`최근 7일`,"last-30":`최근 30일`,"last-90":`최근 90일`,"this-year":`올해`,"all-time":`전체 기간`,custom:`사용자 지정 범위`,from:`시작`,to:`종료`},allUsers:`모든 사용자`,noUser:`사용자 없음 (시스템)`,filterByUser:`사용자별 필터`},maintenance:{title:`유지보수`,overview:`개요`,allOk:`모든 유지보수 최신 상태`,dueCount:`{{count}}개 항목 예정`,dueCount_plural:`{{count}}개 항목 예정`,warningCount:`{{count}}개 경고`,warningCount_plural:`{{count}}개 경고`,totalPrintTime:`총 인쇄 시간`,nextMaintenance:`다음 유지보수`,nothingDue:`예정 없음`,tasks:`작업`,lastPerformed:`마지막 수행`,interval:`간격`,hoursRemaining:`{{hours}}시간 남음`,hoursOverdue:`{{hours}}시간 초과`,markDone:`완료로 표시`,performMaintenance:`유지보수 수행`,history:`기록`,noHistory:`유지보수 기록 없음`,editPrintHours:`인쇄 시간 편집`,currentHours:`현재 시간`,statusTab:`상태`,settingsTab:`설정`,overdueCount:`{{count}}개 초과`,dueSoonCount:`{{count}}개 곧 예정`,dueSoon:`곧 예정`,allGood:`모두 정상`,overdueBy:`{{duration}} 초과`,dueIn:`{{duration}} 후 예정`,timeLeft:`{{duration}} 남음`,day:`1일`,days:`{{count}}일`,week:`1주`,weeks:`{{count}}주`,month:`1개월`,months:`{{count}}개월`,year:`1년`,maintenanceTypes:`유지보수 유형`,maintenanceTypesDescription:`시스템 유형 및 사용자 지정 유지보수 작업`,addCustomType:`사용자 지정 유형 추가`,restoreDefaults:`기본 작업 복원`,intervalType:`간격 유형`,intervalValue:`간격 ({{type}})`,icon:`아이콘`,documentationLink:`문서 링크 (선택사항)`,assignToPrinters:`프린터에 할당`,selectAtLeastOnePrinter:`최소 한 개의 프린터를 선택하세요`,addType:`유형 추가`,custom:`사용자 지정`,printHours:`인쇄 시간`,calendarDays:`달력 일수`,exampleName:`예: HEPA 필터 교체`,viewDocumentation:`문서 보기`,timeBasedInterval:`시간 기반 간격`,intervalOverrides:`간격 재정의`,intervalOverridesDescription:`특정 프린터의 간격 사용자 지정`,assignedToPrinters:`할당된 프린터:`,noPrintersAssigned:`할당된 프린터 없음`,addPrinterShort:`추가:`,printersAssignedClick:`{{count}}개 프린터 할당됨 - 클릭하여 관리`,removeFromPrinter:`이 프린터에서 제거`,types:{lubricateCarbonRods:`카본 로드 윤활`,lubricateRails:`리니어 레일 윤활`,cleanNozzle:`노즐/핫엔드 청소`,checkBelts:`벨트 장력 확인`,cleanBuildPlate:`빌드 플레이트 청소`,checkExtruder:`압출기 기어 확인`,checkCooling:`냉각 팬 확인`,generalInspection:`일반 점검`,cleanCarbonRods:`카본 로드 청소`,lubricateSteelRods:`스틸 로드 윤활`,cleanSteelRods:`스틸 로드 청소`,cleanLinearRails:`리니어 레일 청소`,checkPtfeTube:`PTFE 튜브 확인`,replaceHepaFilter:`HEPA 필터 교체`,replaceCarbonFilter:`활성탄 필터 교체`,lubricateLeftNozzleRail:`좌측 노즐 레일 윤활`},maintenanceComplete:`유지보수가 완료로 표시되었습니다`,typeUpdated:`유지보수 유형이 업데이트되었습니다`,typeDeleted:`유지보수 유형이 삭제되었습니다`,defaultsRestored:`{{count}}개 기본 작업이 복원되었습니다`,printHoursUpdated:`인쇄 시간이 업데이트되었습니다`,printerAssigned:`프린터가 할당되었습니다`,printerRemoved:`프린터가 제거되었습니다`,deleteTypeConfirm:`"{{name}}"을(를) 삭제하시겠습니까?`,deleteSystemTypeTitle:`기본 유지보수 작업을 삭제하시겠습니까?`,deleteSystemTypeMessage:`기본 유지보수 작업 "{{name}}"을(를) 삭제하시겠습니까?`,noPermissionUpdate:`유지보수 항목을 업데이트할 권한이 없습니다`,noPermissionPerform:`유지보수를 수행할 권한이 없습니다`,noPermissionEditTypes:`유지보수 유형을 편집할 권한이 없습니다`,noPermissionDeleteTypes:`유지보수 유형을 삭제할 권한이 없습니다`,noPermissionEditHours:`인쇄 시간을 편집할 권한이 없습니다`,noPermissionRemovePrinter:`프린터 할당을 제거할 권한이 없습니다`,noPermissionAssignPrinter:`프린터를 할당할 권한이 없습니다`,noPermissionEditIntervals:`간격을 편집할 권한이 없습니다`,configureSettings:`유지보수 유형 및 간격 설정`},settings:{sliceEngine:`슬라이스 엔진`,sliceEngineSidecar:`서버 사이드카`,sliceEngineSidecarHint:`슬라이싱이 서버의 슬라이서 사이드카 컨테이너에서 실행됩니다.`,sliceEngineBrowser:`브라우저에서`,sliceEngineBrowserHint:`슬라이싱이 서버 없이 이 기기에서 실행됩니다.`,title:`설정`,general:`일반`,tabs:{general:`일반`,smartPlugs:`스마트 플러그`,sensors:`센서`,notifications:`알림`,queue:`워크플로우`,queueDispatch:`큐 및 디스패치`,queuePipelines:`파이프라인`,filament:`필라멘트`,network:`네트워크`,apiKeys:`API 키`,virtualPrinter:`가상 프린터`,spoolbuddy:`SpoolBuddy`,failureDetection:`실패 감지`,users:`인증`,backup:`백업`,emailAuth:`이메일 인증`,ldap:`LDAP`,twoFa:`이중 인증`,oidc:`SSO / OIDC`,security:`보안`},spoolbuddy:{infoTitle:`SpoolBuddy 기기`,infoBody:`SpoolBuddy 키오스크는 하트비트를 통해 자동으로 등록됩니다. 더 이상 사용하지 않거나 데몬 충돌로 인한 중복이 있는 경우 여기서 기기를 등록 해제하세요.`,duplicatesTitle:`{{count}}개 기기 등록됨`,duplicatesBody:`첫 번째로 등록된 기기만 키오스크 UI에서 사용됩니다. 충돌로 인한 오래된 중복이 있으면 등록 해제하세요 — 온라인 기기는 다음 하트비트에서 자동으로 재등록됩니다.`,empty:`아직 등록된 SpoolBuddy 기기가 없습니다.`,online:`온라인`,offline:`오프라인`,unregister:`등록 해제`,unregisterSuccess:`기기 등록 해제됨`,unregisterError:`기기 등록 해제 실패`,confirmTitle:`SpoolBuddy 기기를 등록 해제하시겠습니까?`,confirmBody:`데이터베이스에서 "{{hostname}}" ({{deviceId}})를 제거합니다. 기기가 온라인이면 다음 하트비트에서 자동으로 재등록됩니다.`,ipAddress:`IP 주소`,firmware:`펌웨어`,lastSeen:`마지막 확인`,daemonUptime:`데몬 가동 시간`,systemUptime:`시스템 가동 시간`,never:`없음`,nfc:`NFC`,scale:`저울`,cpuTemp:`CPU 온도`,memory:`메모리`,disk:`디스크`,update:`업데이트`,updateConfirmTitle:`Spoolbuddy 데몬을 업데이트하시겠습니까?`,updateConfirmBody:`"{{hostname}}"에서 소프트웨어 업데이트를 실행하시겠습니까? 업데이트가 적용되면 데몬이 재시작됩니다.`,restartBrowser:`브라우저 재시작`,restartBrowserConfirmTitle:`키오스크 브라우저를 재시작하시겠습니까?`,restartBrowserConfirmBody:`"{{hostname}}"의 키오스크 브라우저를 재시작하시겠습니까? 화면이 잠시 꺼집니다.`,restartDaemon:`데몬 재시작`,restartDaemonConfirmTitle:`Spoolbuddy 데몬을 재시작하시겠습니까?`,restartDaemonConfirmBody:`"{{hostname}}"의 Spoolbuddy 데몬을 재시작하시겠습니까? 기기가 몇 초 동안 오프라인 상태가 됩니다.`,reboot:`재부팅`,rebootConfirmTitle:`기기를 재부팅하시겠습니까?`,rebootConfirmBody:`"{{hostname}}"을(를) 재부팅하시겠습니까? 기기가 약 1분 동안 오프라인 상태가 됩니다.`,shutdown:`종료`,shutdownConfirmTitle:`기기를 종료하시겠습니까?`,shutdownConfirmBody:`"{{hostname}}"을(를) 종료하시겠습니까? 다시 켜려면 물리적 접근이 필요합니다.`,commandConfirm:`확인`,commandQueued:`명령이 대기열에 추가됨`,commandError:`명령 전송 실패`,cpuLoad:`CPU 부하`},ldap:{title:`LDAP 인증`,enabledDesc:`LDAP 인증이 활성화되어 있습니다`,disabledDesc:`LDAP 인증이 비활성화되어 있습니다`,disabledHint:`아래에서 LDAP 설정을 구성하고 저장한 후 활성화하세요.`,enabled:`LDAP 인증 활성화됨`,disabled:`LDAP 인증 비활성화됨`,feature1:`사용자가 LDAP 자격 증명으로 로그인 가능`,feature2:`로컬 관리자 계정이 대체 수단으로 유지됨`,feature3:`LDAP 그룹이 로그인 시 Bambuddy 그룹에 매핑됨`,serverConfig:`LDAP 서버 설정`,serverUrl:`서버 URL`,serverUrlHint:`SSL에는 ldaps://, StartTLS에는 ldap:// 사용`,security:`보안`,securityHint:`StartTLS는 일반 연결을 TLS로 업그레이드합니다. LDAPS는 처음부터 TLS를 사용합니다.`,bindDn:`바인드 DN (서비스 계정)`,bindPassword:`바인드 비밀번호`,searchBase:`검색 기반 DN`,userFilter:`사용자 검색 필터`,userFilterHint:`{username}은 로그인 사용자명으로 대체됩니다. OpenLDAP의 경우 (uid={username})을 사용하세요.`,autoProvision:`사용자 자동 프로비저닝`,autoProvisionHint:`첫 LDAP 로그인 시 자동으로 Bambuddy 계정 생성`,defaultGroup:`기본 그룹`,defaultGroupNone:`— 없음 (대체 없음) —`,defaultGroupHint:`LDAP 사용자가 인증되었지만 매핑된 LDAP 그룹에 없을 때 할당되는 대체 그룹. 비워두면 매핑되지 않은 사용자에게 권한이 없습니다.`,groupMapping:`그룹 매핑 (JSON)`,groupMappingHint:`LDAP 그룹 DN을 Bambuddy 그룹에 매핑합니다. 사용 가능한 그룹: `,testConnection:`연결 테스트`,settingsSaved:`LDAP 설정이 저장되었습니다`,errors:{serverRequired:`LDAP 서버 URL이 필요합니다`,searchBaseRequired:`검색 기반 DN이 필요합니다`,enableAuthFirst:`먼저 인증을 활성화하세요`,configureLdapFirst:`먼저 LDAP 설정을 저장하세요`},advanced:`고급`},email:{smtpSettings:`SMTP 설정`,smtpHost:`SMTP 서버`,smtpPort:`SMTP 포트`,security:`보안`,authentication:`인증`,username:`사용자명`,password:`비밀번호`,fromEmail:`발신 이메일`,fromName:`발신자 이름`,testConnection:`SMTP 연결 테스트`,testRecipient:`테스트 수신자 이메일`,sendTest:`테스트 이메일 전송`,sending:`전송 중...`,save:`설정 저장`,saving:`저장 중...`,advancedAuth:`고급 인증`,advancedAuthEnabled:`고급 인증이 활성화되어 있습니다`,advancedAuthEnabledDesc:`이메일 기반 사용자 관리 기능이 활성화되어 있습니다. 신규 사용자는 이메일로 자동 생성된 비밀번호를 받으며, 사용자는 비밀번호 찾기 기능으로 비밀번호를 재설정할 수 있습니다.`,advancedAuthDisabled:`고급 인증이 비활성화되어 있습니다`,advancedAuthDisabledDesc:`이메일 기반 사용자 관리 기능을 활성화하려면 고급 인증을 활성화하세요.`,enable:`활성화`,disable:`비활성화`,feature1:`비밀번호가 자동 생성되어 신규 사용자에게 이메일로 전송됨`,feature2:`사용자가 사용자명 또는 이메일로 로그인 가능`,feature3:`비밀번호 찾기 기능 사용 가능`,feature4:`관리자가 이메일로 사용자 비밀번호 재설정 가능`,errors:{requiredFields:`모든 필수 항목을 입력하세요`,usernameRequired:`인증이 활성화된 경우 사용자명이 필요합니다`,enterTestEmail:`테스트 이메일 주소를 입력하세요`,smtpServerAndEmail:`테스트 전에 SMTP 서버와 발신 이메일을 입력하세요`,usernamePasswordRequired:`인증이 활성화된 경우 사용자명과 비밀번호가 필요합니다`,configureSmtpFirst:`먼저 SMTP 설정을 구성하고 테스트하세요`,enableAuthFirst:`이메일 기반 기능을 사용하려면 먼저 인증을 활성화하세요.`},success:{settingsSaved:`SMTP 설정이 성공적으로 저장되었습니다`},securityOptions:{starttls:`STARTTLS (포트 587)`,ssl:`SSL/TLS (포트 465)`,none:`없음 (포트 25)`},authOptions:{enabled:`활성화됨`,disabled:`비활성화됨`}},appearance:`모양`,notifications:`알림`,smartPlugs:`스마트 플러그`,spoolman:`Spoolman`,updates:`업데이트`,language:`언어`,languageDescription:`선호하는 언어를 선택하세요`,theme:`테마`,themeLight:`라이트`,themeDark:`다크`,themeSystem:`시스템`,defaultView:`기본 보기`,defaultViewDescription:`앱을 열 때 표시할 페이지`,checkForUpdates:`업데이트 확인`,autoUpdate:`자동 업데이트`,currentVersion:`현재 버전`,latestVersion:`최신 버전`,upToDate:`최신 상태입니다`,updateAvailable:`업데이트 가능`,notificationLanguage:`알림 언어`,notificationLanguageDescription:`푸시 알림 언어`,bedCooledThreshold:`베드 냉각 임계값`,bedCooledThresholdDescription:`인쇄 후 베드가 냉각된 것으로 간주되는 온도`,userNotificationsEnabled:`사용자 알림`,userNotificationsEnabledDescription:`사용자 알림 메뉴 및 인쇄 작업 이벤트에 대한 이메일 알림을 활성화합니다. 고급 인증이 필요합니다.`,userNotificationsDisabledHint:`사용자 알림을 사용하려면 고급 인증을 활성화하세요.`,notificationProviders:`알림 제공자`,addProvider:`제공자 추가`,editProvider:`제공자 편집`,providerType:`제공자 유형`,testNotification:`알림 테스트`,testSuccess:`테스트 알림이 성공적으로 전송되었습니다`,testFailed:`테스트 알림 전송 실패`,quietHours:`방해 금지 시간`,quietHoursDescription:`이 시간 동안 방해하지 않음`,quietHoursStart:`시작`,quietHoursEnd:`종료`,events:{title:`알림 이벤트`,printStart:`인쇄 시작됨`,printComplete:`인쇄 완료됨`,printFailed:`인쇄 실패`,printStopped:`인쇄 정지됨`,printProgress:`진행 마일스톤`,printProgressDescription:`25%, 50%, 75%에 알림`,printerOffline:`프린터 오프라인`,printerError:`프린터 오류`,filamentLow:`필라멘트 부족`,maintenanceDue:`유지보수 예정`,maintenanceDueDescription:`유지보수가 필요할 때 알림`},smartPlug:{title:`스마트 플러그`,add:`스마트 플러그 추가`,edit:`스마트 플러그 편집`,name:`이름`,ipAddress:`IP 주소`,linkedPrinter:`연결된 프린터`,autoOn:`자동 켜기`,autoOnDescription:`인쇄 시작 시 켜기`,autoOff:`자동 끄기`,autoOffDescription:`인쇄 완료 후 끄기`,offDelay:`끄기 지연`,offDelayMinutes:`인쇄 후 분`,offDelayTemp:`노즐 온도 이하일 때`,currentState:`현재 상태`,turnOn:`켜기`,turnOff:`끄기`},filamentTracking:`필라멘트 추적`,filamentTrackingDesc:`필라멘트 스풀을 추적하는 방법을 선택하세요. 내장 인벤토리를 사용하거나 외부 Spoolman 서버에 연결할 수 있습니다.`,autoAddUnknownRfid:`알 수 없는 RFID 스풀 자동 추가`,autoAddUnknownRfidDesc:`알 수 없는 RFID 태그가 있는 스풀이 감지되면 자동으로 인벤토리 항목을 생성합니다. 새 스풀을 미리 수동으로 등록한다면 중복을 피하기 위해 끄세요.`,filamentChecks:`필라멘트 확인`,disableFilamentWarnings:`필라멘트 경고 비활성화`,disableFilamentWarningsDesc:`인쇄 또는 대기열 추가 시 필라멘트 부족 경고 표시 안 함`,preferLowestFilament:`남은 필라멘트가 가장 적은 것 우선`,preferLowestFilamentDesc:`여러 스풀이 일치할 때 남은 필라멘트가 가장 적은 것 사용`,preferLowestFilamentBackupNote:`프린터에서 AMS 필라멘트 백업이 활성화된 경우에만 적용됩니다. 그렇지 않으면 선택한 스풀이 다 떨어졌을 때 두 번째 스풀로 전환할 수 없습니다.`,trackingModeBuiltIn:`내장 인벤토리`,trackingModeBuiltInDesc:`RFID 자동 매칭 및 사용량 추적 포함`,trackingModeSpoolmanDesc:`외부 필라멘트 관리 서버`,builtInFeatureRfid:`AMS의 Bambu Lab RFID 스풀 자동 감지`,builtInFeatureUsage:`인쇄당 필라멘트 소비량 추적`,builtInFeatureCatalog:`스풀, 색상, K 팩터 프로필 관리`,builtInFeatureThirdParty:`서드파티 스풀을 인벤토리 스풀에 할당 가능`,amsSyncButton:`AMS에서 무게 동기화`,amsSyncTitle:`AMS에서 스풀 무게 동기화`,amsSyncMessage:`연결된 프린터의 현재 AMS 잔여% 값으로 모든 인벤토리 스풀 무게를 덮어씁니다. 손상된 무게 데이터를 복구하는 데 사용하세요. 프린터가 온라인이어야 합니다.`,amsSyncing:`동기화 중...`,amsSyncSuccess:`{{synced}}개 스풀 동기화됨, {{skipped}}개 건너뜀`,amsSyncError:`AMS에서 무게 동기화 실패`,spoolmanAmsSyncButton:`AMS에서 Spoolman 무게 동기화`,spoolmanAmsSyncTitle:`AMS에서 Spoolman 스풀 무게 동기화`,spoolmanAmsSyncMessage:`연결된 프린터의 현재 AMS 잔여% 값으로 모든 Spoolman 스풀 무게를 업데이트합니다. 프린터가 온라인이어야 합니다.`,spoolmanAmsSyncing:`동기화 중...`,spoolmanAmsSyncSuccess:`{{synced}}개 스풀 동기화됨, {{skipped}}개 건너뜀`,spoolmanAmsSyncError:`AMS에서 Spoolman 무게 동기화 실패`,spoolmanAmsSyncErrorUnreachable:`Spoolman 무게 동기화 실패 (Spoolman 접근 불가)`,spoolmanAmsSyncErrorNotConfigured:`Spoolman 무게 동기화 실패 (Spoolman 미설정)`,spoolmanNotConfigured:`Spoolman 미설정`,spoolmanFilamentCatalogTitle:`Spoolman 필라멘트 카탈로그`,spoolmanFilamentCatalogDesc:`Spoolman 인스턴스의 필라멘트 이름 및 공 무게. 이름과 스풀 무게는 여기서 편집 가능하며 다른 속성은 Spoolman에서 직접 관리됩니다.`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`Spoolman 서버의 URL (예: http://localhost:7912)`,spoolmanConnected:`연결됨`,spoolmanDisconnected:`연결 끊김`,status:`상태`,connect:`연결`,disconnect:`연결 해제`,howSyncWorks:`동기화 작동 방식`,syncInfoRfidOnly:`RFID가 있는 공식 Bambu Lab 스풀만 동기화됨`,syncInfoAutoCreate:`새 스풀은 첫 번째 동기화 시 Spoolman에 자동 생성됨`,syncInfoThirdPartySkipped:`비 Bambu Lab 스풀 (서드파티, 리필)은 건너뜀`,linkingExistingSpools:`기존 스풀 연결`,linkingExistingSpoolsDesc:`기존 Spoolman 스풀을 AMS에 연결하려면 AMS 슬롯 위에 마우스를 올리고 "Spoolman에 연결"을 클릭하세요.`,syncMode:`동기화 모드`,syncModeAuto:`자동`,syncModeManual:`수동만`,syncModeAutoDesc:`변경이 감지되면 AMS 데이터가 자동으로 동기화됨`,syncModeManualDesc:`수동으로 트리거할 때만 동기화`,syncAmsData:`AMS 데이터 동기화`,syncAmsDataDesc:`프린터 AMS 데이터를 Spoolman에 수동으로 동기화`,allPrinters:`모든 프린터`,noDefaultPrinter:`기본값 없음 (매번 묻기)`,sidebarOrder:`사이드바 순서`,saveThumbnails:`썸네일 저장`,captureFinishPhoto:`완료 사진 캡처`,noPrintersConfigured:`설정된 프린터 없음`,archiveMode:{always:`항상 아카이브 항목 생성`,never:`아카이브 항목 생성 안 함`,ask:`매번 묻기`},checkForUpdatesLabel:`업데이트 확인`,checkPrinterFirmware:`프린터 펌웨어 확인`,includeBetaUpdates:`베타 버전 포함`,includeBetaUpdatesDesc:`업데이트 확인 시 베타 및 사전 릴리스 버전에 대해 알림`,localLogin:{disable:`로컬 사용자명/비밀번호 로그인 비활성화`,disableHint:`활성화하면 SSO 공급자로만 로그인할 수 있습니다. LDAP는 영향을 받지 않습니다. 서버에서 BAMBUDDY_LOCAL_LOGIN=true 를 설정하면 복구 경로가 유지됩니다.`},enableRetry:`재시도 활성화`,homeAssistantDescription:`Home Assistant를 통해 스마트 플러그 제어`,environmentManagedLabel:`(환경 변수 관리)`,autoEnabledViaEnv:`환경 변수를 통해 자동 활성화됨`,urlFromEnvReadOnly:`HA_URL 환경 변수에서 값 설정됨 (읽기 전용)`,tokenFromEnvReadOnly:`HA_TOKEN 환경 변수에서 값 설정됨 (읽기 전용)`,mqttConnectedTo:`연결됨`,prometheusDescription:`Prometheus 형식으로 프린터 데이터 노출`,noSmartPlugsTitle:`설정된 스마트 플러그 없음`,noSmartPlugsDescription:`에너지 사용량 추적 및 전원 제어 자동화를 위해 Tasmota 기반 스마트 플러그를 추가하세요.`,noProvidersTitle:`설정된 제공자 없음`,noProvidersDescription:`알림을 받으려면 제공자를 추가하세요.`,noTemplatesAvailable:`사용 가능한 템플릿 없음. 기본 템플릿을 시드하려면 백엔드를 재시작하세요.`,apiPermissionView:`프린터 상태 및 대기열 보기`,apiPermissionEdit:`인쇄 대기열에서 항목 추가 및 제거`,apiKeysEmptyTitle:`API 키 없음`,apiKeysEmptyDescription:`외부 서비스와 통합하려면 API 키를 만드세요.`,noUsersFound:`사용자를 찾을 수 없습니다`,noGroupsFound:`그룹을 찾을 수 없습니다`,noGroupsAvailable:`사용 가능한 그룹 없음`,passwordsDoNotMatch:`비밀번호가 일치하지 않습니다`,systemGroupWarning:`시스템 그룹 이름은 변경할 수 없습니다`,authDisabledTitle:`인증이 비활성화되어 있습니다`,authDisabledFeature1:`시스템 접근 시 로그인 필요`,authDisabledFeature2:`그룹 기반 권한으로 여러 사용자 생성`,authDisabledFeature3:`50개 이상의 세분화된 권한으로 접근 제어`,userHasCreated:`이 사용자가 만든 항목:`,userItemsQuestion:`이 항목들을 어떻게 처리하시겠습니까?`,deleteUserConfirm:`이 사용자를 삭제하시겠습니까?`,actionCannotBeUndone:`이 작업은 취소할 수 없습니다.`,addFirstSmartPlug:`첫 번째 스마트 플러그 추가`,providers:`제공자`,log:`로그`,testAll:`모두 테스트`,testResults:`테스트 결과`,testPassedCount:`{{count}}개 통과`,testFailedCount:`{{count}}개 실패`,messageTemplates:`메시지 템플릿`,messageTemplatesDescription:`각 이벤트에 대한 알림 메시지를 사용자 지정하세요.`,apiKeys:`API 키`,apiKeysDescription:`외부 통합 및 웹훅을 위한 API 키를 만드세요.`,createKey:`키 만들기`,apiKeyCreated:`API 키가 성공적으로 생성되었습니다`,apiKeyCopyWarning:`지금 이 키를 복사하세요 - 다시 표시되지 않습니다!`,useInApiBrowser:`API 브라우저에서 사용`,apiKeyQrButton:`QR 코드`,apiKeyQrTitle:`스캔하여 설정`,apiKeyQrCaption:`모바일 앱으로 스캔하여 이 서버와 API 키를 추가하세요.`,apiKeyQrWarning:`비밀 API 키가 포함되어 있습니다. 다른 사람이 볼 수 있는 곳에서 공유하거나 스크린샷하지 마세요.`,createNewApiKey:`새 API 키 만들기`,keyName:`키 이름`,keyNamePlaceholder:`예: Home Assistant, OctoPrint`,readStatus:`상태 읽기`,readStatusDescription:`프린터 상태, 대기열, 라이브러리, 아카이브 및 슬라이서 파이프라인 보기`,manageQueue:`대기열 관리`,manageQueueDescription:`인쇄 대기열에서 항목 추가 및 제거. "라이브러리 관리"와 함께 슬라이서 파이프라인 실행`,controlPrinter:`프린터 제어`,controlPrinterDescription:`인쇄 일시정지, 재개, 정지`,manageLibrary:`라이브러리 관리`,manageLibraryDescription:`라이브러리 파일 업로드, 이름 변경, 삭제 및 슬라이스; MakerWorld에서 모델 가져오기. "대기열 관리"와 함께 슬라이서 파이프라인 실행`,manageInventory:`재고 관리`,manageInventoryDescription:`스풀 및 재고 레코드 생성, 업데이트 및 삭제. SpoolBuddy 키오스크(NFC 스캔, 저울 측정값, 키오스크 시스템 명령)에 필요합니다.`,manageMaintenance:`유지보수 관리`,manageMaintenanceDescription:`완료된 유지보수 기록, 카운터 재설정, 주기 편집, 유지보수 유형 카탈로그 관리. 프린터 제어를 더 광범위하게 허용하지 않고 "노즐을 청소했다"를 기록하는 Home Assistant 자동화에 적합합니다.`,manageArchives:`아카이브 관리`,manageArchivesDescription:`오래된 출력물과 통계 기여 항목의 제거를 포함하여 출력 아카이브를 편집하고 삭제합니다. 출력 기록을 정리하는 자동화에 적합합니다.`,manageProjects:`프로젝트 관리`,manageProjectsDescription:`프로젝트를 생성, 업데이트, 삭제하고 프로젝트에 아카이브를 추가합니다. 출력물을 프로젝트로 정리하는 자동화에 적합합니다.`,maintenanceBadge:`유지보수`,archivesBadge:`아카이브`,projectsBadge:`프로젝트`,libraryBadge:`라이브러리`,inventoryBadge:`재고`,cloudAccess:`클라우드 접근 허용`,cloudAccessDescription:`사용자를 대신하여 Bambu Cloud 프리셋 및 필라멘트를 읽습니다. Bambu Cloud에 로그인되어 있어야 합니다.`,cloudBadge:`클라우드`,legacyKey:`레거시`,legacyKeyTooltip:`사용자별 소유권 이전에 생성됨. 클라우드 접근을 사용하려면 재생성하세요`,unnamedKey:`이름 없는 키`,lastUsed:`마지막 사용`,read:`읽기`,control:`제어`,createFirstKey:`첫 번째 키 만들기`,webhookEndpoints:`웹훅 엔드포인트`,webhookApiKeyHint:`X-API-Key 헤더에 API 키를 사용하세요.`,webhook:{getAllStatus:`모든 프린터 상태 가져오기`,getSpecificStatus:`특정 프린터 상태 가져오기`,addToQueue:`인쇄 대기열에 추가`,pausePrint:`인쇄 일시정지`,resumePrint:`인쇄 재개`,stopPrint:`인쇄 정지`},apiBrowser:`API 브라우저`,apiBrowserDescription:`사용 가능한 모든 API 엔드포인트를 탐색하고 테스트하세요.`,apiKeyForTesting:`테스트용 API 키`,apiKeyPlaceholder:`인증된 엔드포인트를 테스트하려면 API 키를 여기에 붙여넣으세요...`,apiKeyHint:`이 키는 요청과 함께 X-API-Key 헤더로 전송됩니다.`,deleteApiKeyTitle:`API 키 삭제`,deleteApiKeyMessage:`이 API 키를 삭제하시겠습니까? 이 키를 사용하는 모든 통합이 작동을 멈춥니다.`,deleteKey:`키 삭제`,amsDisplayThresholds:`AMS 표시 임계값`,amsThresholdsDescription:`AMS 습도 및 온도 표시기의 색상 임계값을 설정하세요.`,humidity:`습도`,goodGreen:`좋음 (녹색)`,fairOrange:`보통 (주황색)`,aboveFairBad:`보통 임계값 초과 시 빨간색 (나쁨)으로 표시`,fairAlsoDryingThreshold:`이 임계값은 자동 건조 활성화 시 트리거로도 사용됨`,fairBelowDryingFloor:`자동 건조로는 이 값에 도달할 수 없습니다. AMS는 히터가 작동하는 동안 {{floor}}% 이상을 보고하므로 각 주기가 끝나고 곧바로 다시 시작됩니다. 자동 건조를 사용한다면 {{floor}}%보다 높게 설정하세요.`,temperature:`온도`,goodBlue:`좋음 (파란색)`,aboveFairHot:`보통 임계값 초과 시 빨간색 (뜨거움)으로 표시`,tempAlarmThreshold:`알림 기준값`,tempAlarmSeparateFromBand:`알림을 보내는 것은 알림 기준값뿐입니다. 좋음과 보통은 표시 색상에만 사용됩니다. 비워 두면 기존과 같이 보통 기준값에서 알립니다.`,tempAlarmMustBePositive:`0 이하의 기준값은 무시되며, 보통 기준값으로 알립니다.`,historyRetention:`기록 보존`,keepSensorHistory:`센서 기록 보존 기간`,historyRetentionDescription:`오래된 습도 및 온도 데이터가 자동으로 삭제됩니다`,defaultPrintOptions:`기본 인쇄 옵션`,defaultPrintOptionsDescription:`새 인쇄 시작 시 기본값을 설정하세요. 인쇄 대화 상자에서 인쇄별로 재정의할 수 있습니다.`,defaultBedLevelling:`베드 레벨링`,defaultBedLevellingDesc:`인쇄 전 자동 베드 레벨링`,defaultFlowCali:`유량 캘리브레이션`,defaultFlowCaliDesc:`압출 유량 캘리브레이션`,defaultVibrationCali:`진동 캘리브레이션`,defaultVibrationCaliDesc:`링잉 아티팩트 감소`,defaultLayerInspect:`첫 번째 층 검사`,defaultLayerInspectDesc:`첫 번째 층 AI 검사`,defaultTimelapse:`타임랩스`,defaultTimelapseDesc:`타임랩스 영상 녹화`,defaultNozzleOffsetCali:`노즐 오프셋 보정`,defaultNozzleOffsetCaliDesc:`익스트루더 간 노즐 오프셋 보정`,tempFanPresetsTitle:`온도 및 팬 프리셋`,tempFanPresetsDescription:`프린터 카드의 온도 및 팬 속도 팝오버에 표시되는 빠른 선택 값을 사용자 지정합니다. 끄기 버튼은 항상 표시됩니다.`,tempFanPresetsNozzle:`노즐 온도`,tempFanPresetsBed:`베드 온도`,tempFanPresetsChamber:`챔버 온도`,tempFanPresetsFan:`팬 속도`,tempFanPresetsReset:`기본값으로 재설정`,concurrentUploadsTitle:`동시 업로드`,concurrentUploadsDescription:`대기열이 동시에 파일을 보낼 수 있는 프린터 수입니다. 프린터는 파일을 느리게 받으며(큰 출력물은 몇 분이 걸릴 수 있습니다) 각 프린터는 자기 차례를 기다립니다. 따라서 프린터가 많은 환경에서는 이 값을 높이면 배치의 마지막 프린터가 앞선 모든 전송이 끝나기를 기다리지 않아도 됩니다. 네트워크나 Bambuddy 호스트가 병렬 전송을 버거워하면 값을 낮추세요.`,concurrentUploadsLabel:`동시에 전송할 프린터 수`,concurrentUploadsHelp:`1이면 한 번에 한 대씩 전송합니다(기존 동작). 기본값은 4입니다.`,staggeredStart:`엇갈린 시작`,staggeredStartDescription:`다중 프린터 일괄 시작 시 기본 그룹 크기 및 간격. 인쇄 모달에서 배치별로 재정의할 수 있습니다.`,preheatTitle:`예열 & 히트 소크`,preheatDescription:`대기열의 각 인쇄가 시작되기 전에 베드(및 지원되는 경우 챔버)를 가열하고 온도를 유지합니다. 챔버 능동 가열이 없는 프린터에서 엔지니어링 필라멘트(PA, ABS) 인쇄에 유용합니다. 소크 타이머가 진행되는 동안 베드 복사열로 챔버가 데워집니다. 베드 목표 온도는 인쇄 파일에서 읽어오며 챔버 동작은 프린터 모델에 따라 다릅니다.`,preheatEnabled:`예열 & 소크 활성화`,preheatEnabledDesc:`꺼짐일 경우 대기열 인쇄가 즉시 시작됩니다. 각 항목은 인쇄별로 재정의할 수 있습니다.`,preheatFilamentTargetsLabel:`필라멘트별 챔버 목표 (°C)`,preheatFilamentTargetsHint:`Bambuddy는 로드된 AMS 슬롯 중 가장 높은 목표를 선택합니다. 모든 슬롯이 0으로 도출되는 인쇄(PLA, PETG, TPU, PVA)는 예열을 완전히 건너뛰고 즉시 시작합니다.`,preheatFilamentTargetsReset:`기본값으로 재설정`,preheatFilamentTargetsDefaultRow:`기타 / 미매핑`,preheatMaxWait:`최대 대기 (초)`,preheatMaxWaitHelp:`소크로 전환되기 전 챔버 가열 단계의 상한.`,preheatSoak:`소크 (초)`,preheatSoakHelp:`목표 도달 또는 최대 대기 경과 후 유지 시간.`,preheatHardwareTitle:`프린터별 동작:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E는 M141으로 챔버를 능동적으로 가열합니다. X1C/P2S는 챔버 온도를 읽지만 베드 복사열로만 가열됩니다. P1S/P1P/A1/A1 Mini는 챔버 센서가 없어 소크 타이머만 적용됩니다.`,preheatPerItemDesc:`이 인쇄가 시작되기 전에 베드와 챔버를 가열합니다. 기본적으로 설정 → 워크플로의 전역 토글을 사용합니다.`,preheatOverride_inherit:`상속`,preheatOverride_on:`켜기`,preheatOverride_off:`끄기`,calibrationMode_off:`끄기`,calibrationMode_on:`켜기`,calibrationMode_auto:`자동`,preheatTargetOverride:`챔버 목표 재정의 (°C, 비우면 필라멘트 기본값)`,preheatTargetOverrideHelp:`0은 챔버 없이 베드를 가열하고 소크를 실행합니다. 비워 두면 챔버가 필요 없는 인쇄는 예열을 완전히 건너뜁니다.`,plateClear:`플레이트 비움 확인`,requirePlateClear:`플레이트 비움 확인 필요`,requirePlateClearDescription:`활성화하면 스케줄러가 완료된 작업이 있는 프린터에서 대기 중인 인쇄를 시작하기 전에 프린터별 플레이트 비움 확인을 기다립니다.`,keepBedWarm:`출력 사이에 베드 온도 유지`,keepBedWarmDesc:`플레이트 클리어 확인 대기 중에 아래의 온도 유지 값으로 베드를 유지하여 챔버를 따뜻하게 유지합니다. 다음 출력의 베드 온도가 더 높으면 그 값을 사용합니다. 다음 출력에 챔버 가열이 필요한 경우에만 적용됩니다(ASA, ABS, PA, PC 등). 플레이트 클리어 확인이 활성화되어 있어야 합니다.`,keepWarmBedTemp:`온도 유지 시 베드 온도 (°C)`,keepWarmBedTempHelp:`베드로 챔버를 가열해야 할 때 사용됩니다(온도 유지 중, 그리고 출력 파일에 베드 온도가 없는 경우의 예열 시). 출력 파일의 베드 온도가 더 높으면 항상 그 값이 우선합니다.`,keepWarmMaxMinutes:`온도 유지 종료 시간(분)`,keepWarmMaxMinutesHelp:`이 시간 안에 플레이트를 비우지 않으면 히터를 무기한 켜두지 않고 끕니다.`,gcodeInjection:`G코드 주입`,gcodeInjectionDescription:`자동 인쇄 시스템을 위한 인쇄 시작 및/또는 종료 시 주입할 사용자 지정 G코드를 설정하세요.`,gcodeInjectionNoPrinters:`프린터가 없습니다. G코드 스니펫을 설정하려면 프린터를 추가하세요.`,gcodeStartLabel:`시작 G코드`,gcodeEndLabel:`종료 G코드`,gcodeStartPlaceholder:`인쇄 시작 전 앞에 추가되는 G코드...`,gcodeEndPlaceholder:`인쇄 종료 후 뒤에 추가되는 G코드...`,staggerGroupSize:`그룹 크기`,staggerGroupSizeHelp:`그룹당 동시에 시작할 프린터 수`,staggerInterval:`간격 (분)`,staggerIntervalHelp:`각 그룹 시작 사이의 지연`,queueDrying:`대기열 자동 건조`,queueDryingDescription:`대기 중인 인쇄 사이에 프린터가 유휴 상태일 때 AMS 필라멘트를 자동으로 건조합니다.`,queueDryingEnabled:`자동 건조 활성화`,queueDryingEnabledDescription:`프린터가 유휴 상태이고 습도가 임계값 초과 시 자동으로 AMS 건조 시작`,queueDryingBlock:`건조 완료까지 대기`,queueDryingBlockDescription:`건조가 완료될 때까지 인쇄 대기열을 차단합니다. 끄면 인쇄가 건조보다 우선합니다.`,ambientDryingEnabled:`주변 건조`,ambientDryingEnabledDescription:`대기 중인 인쇄가 없어도 습도가 임계값을 초과하면 유휴 프린터에서 자동으로 필라멘트 건조`,printDryingEnabled:`인쇄 중 건조 계속`,printDryingEnabledDescription:`지원되는 하드웨어(H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L 최신 펌웨어)에서 인쇄 중에도 자동 건조를 계속 실행합니다. 스풀 보호를 위해 건조 온도가 유휴 프리셋보다 자동으로 5°C 낮게 제한됩니다.`,dryingPresets:`건조 프리셋`,dryingPresetsDescription:`필라멘트 유형별 온도 및 시간. AMS 2 Pro는 낮은 온도, AMS-HT는 높은 온도를 지원합니다.`,dryingFilament:`필라멘트`,humidityThresholds:`습도 임계값`,humidityThresholdsDescription:`자동 건조 및 알람용 필라멘트 유형별 습도 임계값. 한 AMS에 혼합 적재 시 가장 낮은 값을 사용합니다.`,humidityThresholdCol:`임계값`,humidityThresholdDefault:`기본값 (알 수 없는 유형)`,printModal:`인쇄 모달`,expandCustomMapping:`사용자 지정 매핑 기본 펼침`,expandCustomMappingDescription:`여러 프린터에 인쇄할 때 프린터별 AMS 매핑을 펼친 상태로 표시`,authentication:`인증`,authEnabledDescription:`인스턴스가 사용자 인증으로 보안됨`,authDisabledDescription:`로그인 필요 및 사용자 접근 관리를 위해 활성화`,authDisabledMessage:`사용자 계정 생성, 권한 관리, Bambuddy 인스턴스 보안을 위해 인증을 활성화하세요.`,enableAuthentication:`인증 활성화`,currentUser:`현재 사용자`,changePassword:`비밀번호 변경`,admin:`관리자`,users:`사용자`,addUser:`사용자 추가`,groups:`그룹`,addGroup:`그룹 추가`,system:`시스템`,noDescription:`설명 없음`,userCount:`{{count}}명의 사용자`,permissionCount:`{{count}}개 권한`,createUser:`사용자 만들기`,username:`사용자명`,enterUsername:`사용자명 입력`,password:`비밀번호`,enterPassword:`비밀번호 입력 (최소 6자)`,confirmPassword:`비밀번호 확인`,confirmPasswordPlaceholder:`비밀번호 확인`,viewReleaseOnGitHub:`GitHub에서 릴리스 보기`,turnAllPlugsOn:`모든 플러그 켜기`,turnAllPlugsOff:`모든 플러그 끄기`,clearNotificationLogs:`알림 로그 지우기`,clearLogsMessage:`30일보다 오래된 모든 알림 로그를 영구적으로 삭제합니다. 이 작업은 취소할 수 없습니다.`,clearLogs:`로그 지우기`,resetUiPreferences:`UI 기본 설정 초기화`,resetUiPreferencesMessage:`모든 UI 기본 설정을 기본값으로 초기화합니다: 사이드바 순서, 테마, 대시보드 레이아웃, 보기 모드, 정렬 기본 설정. 프린터, 아카이브, 서버 설정은 영향받지 않습니다. 지운 후 페이지가 새로고침됩니다.`,resetPreferences:`기본 설정 초기화`,deleteGroupTitle:`그룹 삭제`,deleteGroupMessage:`이 그룹을 삭제하시겠습니까? 이 그룹의 사용자는 이 권한을 잃게 됩니다.`,deleteGroup:`그룹 삭제`,disableAuthenticationTitle:`인증 비활성화`,disableAuthenticationMessage:`인증을 비활성화하시겠습니까? 이렇게 하면 로그인 없이 Bambuddy 인스턴스에 접근할 수 있게 됩니다. 모든 사용자는 데이터베이스에 유지되지만 인증은 비활성화됩니다.`,disableAuthentication:`인증 비활성화`,configureBambuddy:`Bambuddy 설정`,systemDefault:`시스템 기본값`,archiveSettings:`아카이브 설정`,newWindow:`새 창`,embeddedOverlay:`내장 오버레이`,preferredSlicer:`선호하는 슬라이서`,preferredSlicerDescription:`API 사이드카를 통한 앱 내 슬라이싱에 사용되는 슬라이서`,openInSlicerLabel:`슬라이서에서 열기`,openInSlicerInherit:`API 슬라이서와 동일`,openInSlicerDescription:`'슬라이서에서 열기' 버튼이 사용하는 데스크톱 슬라이서입니다. 'API 슬라이서와 동일'로 두어 상속하거나 로컬에서 사용할 다른 슬라이서를 선택하세요.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev에는 Bambu 제작 3MF 파일 슬라이싱을 차단하는 알려진 CLI 버그가 있습니다. 업스트림 수정이 출시될 때까지 Bambu Studio를 사용하는 것이 좋습니다.`,useSlicerApi:`슬라이서 API 사용`,useSlicerApiDescription:`켜면 "슬라이스" 작업이 앱 내 슬라이서 모달을 열고 슬라이서 API 사이드카를 호출합니다. 끄면 URI 스킴을 통해 데스크톱 슬라이서로 전달합니다.`,slicerCard:`슬라이서`,orcaslicerApiUrl:`OrcaSlicer 사이드카 URL`,bambuStudioApiUrl:`Bambu Studio 사이드카 URL`,slicerStallTimeout:`슬라이서 정지 시간 제한(분)`,slicerStallTimeoutDescription:`사이드카에서 이 시간 동안 진행 상황이 없으면 슬라이싱을 중단합니다. 진행 상황을 계속 보고하는 무거운 모델은 아무리 오래 걸려도 중단되지 않습니다. 진행 상황을 보고하지 않는 사이드카에서는 이 값이 전체 시간 제한으로 사용됩니다.`,slicerApiUrlDescription:`슬라이서 API 사이드카 컨테이너의 URL. SLICER_API_URL / BAMBU_STUDIO_API_URL 환경 변수 기본값을 사용하려면 비워두세요.`,externalCameras:`외부 카메라`,costTracking:`비용 추적`,billingEnabled:`결제 기능 사용`,billingEnabledDescription:`사용자에게 인쇄 비용을 청구하고 재무 기능을 사용합니다`,printerKillSwitch:`무단 인쇄 자동 중지`,printerKillSwitchDescription:`승인 없이 시작된 인쇄를 즉시 중지합니다.`,financeBudgetReset:`월별 재무 예산 초기화`,financeBudgetResetDay:`초기화 날짜`,financeBudgetResetDayHelp:`해당 날짜가 없는 짧은 달에는 그 달의 마지막 날에 초기화합니다.`,financeBudgetResetTimezone:`초기화 시간대`,financeBudgetResetTimezoneHelp:`예산 기간의 시작은 이 시간대를 기준으로 계산됩니다.`,rebuildLedger:`지갑 원장 재구성`,rebuildLedgerStarted:`원장 재구성을 시작했습니다`,rebuildLedgerConfirmTitle:`지갑 원장을 재구성하시겠습니까?`,rebuildLedgerConfirmMessage:`과거 잔액 값을 복구하기 위해 지갑 원장을 재구성합니다. 수행 내용을 정확히 아는 경우에만 실행하세요.`,rebuildLedgerInProgress:`재구성 시작 중...`,printsOnly:`인쇄만`,totalConsumption:`총 소비`,dataManagement:`데이터 관리`,storageUsage:`저장소 사용량`,storageUsageDescription:`카테고리별 데이터 사용량 분류`,storageUsageTotal:`총계`,storageUsageErrors:`오류`,storageUsageOtherBreakdown:`기타 (정적 자산, 스크립트, 구성 파일 포함)`,storageUsageSystem:`시스템`,storageUsageData:`데이터`,storageUsageUnavailable:`저장소 사용량 정보 불가`,clearNotificationLogsDescription:`30일보다 오래된 알림 로그 삭제`,resetUiPreferencesDescription:`사이드바 순서, 테마, 보기 모드, 레이아웃 기본 설정 초기화. 프린터, 아카이브, 설정은 영향받지 않습니다.`,enableHomeAssistant:`Home Assistant 활성화`,enableMqtt:`MQTT 활성화`,useTls:`TLS 사용`,enableMetricsEndpoint:`메트릭 엔드포인트 활성화`,availableMetrics:`사용 가능한 메트릭`,editUser:`사용자 편집`,deleteUserTitle:`사용자 삭제`,groupName:`그룹 이름`,leaveEmptyForAnonymous:`익명으로 두려면 비워두세요`,leaveEmptyForNoAuth:`인증 없이 두려면 비워두세요`,enterNewPassword:`새 비밀번호 입력`,confirmNewPassword:`새 비밀번호 확인`,enterGroupName:`그룹 이름 입력`,enterDescriptionOptional:`설명 입력 (선택사항)`,enterCurrentPassword:`현재 비밀번호 입력`,enterNewPasswordMin6:`새 비밀번호 입력 (최소 6자)`,toast:{keyCopied:`키가 클립보드에 복사되었습니다`,copyFailed:`키 복사 실패`,keyAddedToBrowser:`API 브라우저에 키가 추가되었습니다`,clearLogsFailed:`로그 지우기 실패`,uiPreferencesReset:`UI 기본 설정이 초기화되었습니다. 새로고침 중...`,authDisabled:`인증이 성공적으로 비활성화되었습니다`,authDisableFailed:`인증 비활성화 실패`,apiKeyCreated:`API 키가 생성되었습니다`,apiKeyDeleted:`API 키가 삭제되었습니다`,userCreated:`사용자가 성공적으로 생성되었습니다`,userUpdated:`사용자가 성공적으로 업데이트되었습니다`,userDeleted:`사용자가 성공적으로 삭제되었습니다`,groupCreated:`그룹이 성공적으로 생성되었습니다`,groupUpdated:`그룹이 성공적으로 업데이트되었습니다`,groupDeleted:`그룹이 성공적으로 삭제되었습니다`,fillRequiredFields:`모든 필수 항목을 입력하세요`,passwordsDoNotMatch:`비밀번호가 일치하지 않습니다`,passwordTooShort:`비밀번호는 최소 6자여야 합니다`,enterGroupName:`그룹 이름을 입력하세요`,settingsSaved:`설정이 저장되었습니다`,noPermissionUpdate:`설정을 변경할 권한이 없습니다`,cameraSettingsSaved:`카메라 설정이 저장되었습니다`,enterCameraUrl:`카메라 URL을 입력하세요`,passwordChanged:`비밀번호가 성공적으로 변경되었습니다`,connectionFailed:`연결 실패`,testFailed:`테스트 실패`,cameraConnected:`카메라 연결됨{{resolution}}`,cameraConnectedCoalesced:`카메라 연결됨{{resolution}} (이미 진행 중인 캡처와 공유됨)`,passwordNeedsUppercase:`비밀번호에 대문자가 최소 1개 포함되어야 합니다`,passwordNeedsLowercase:`비밀번호에 소문자가 최소 1개 포함되어야 합니다`,passwordNeedsDigit:`비밀번호에 숫자가 최소 1개 포함되어야 합니다`,passwordNeedsSpecial:`비밀번호에 특수문자가 최소 1개 포함되어야 합니다`},testConnection:`연결 테스트`,catalog:{spoolCatalog:`스풀 카탈로그`,spoolCatalogDescription:`브랜드/유형별 빈 스풀 무게. 스풀 추가 시 자동 무게 조회에 사용됩니다.`,searchCatalog:`카탈로그 검색...`,addNewEntry:`새 항목 추가`,namePlaceholder:`이름 (예: Bambu Lab - Plastic)`,weight:`무게`,type:`유형`,default:`기본`,custom:`사용자 지정`,noMatch:`검색에 일치하는 항목 없음`,empty:`카탈로그에 항목 없음`,deleteEntry:`항목 삭제`,deleteConfirm:`"{{name}}"을(를) 삭제하시겠습니까?`,resetCatalog:`카탈로그 초기화`,resetConfirm:`카탈로그를 기본값으로 초기화하시겠습니까? 모든 사용자 지정 항목이 제거됩니다.`,loadFailed:`스풀 카탈로그 로드 실패`,nameWeightRequired:`이름과 무게가 필요합니다`,entryAdded:`항목이 추가되었습니다`,addFailed:`항목 추가 실패`,entryUpdated:`항목이 업데이트되었습니다`,updateFailed:`항목 업데이트 실패`,entryDeleted:`항목이 삭제되었습니다`,deleteFailed:`항목 삭제 실패`,resetSuccess:`카탈로그가 기본값으로 초기화되었습니다`,resetFailed:`카탈로그 초기화 실패`,exported:`{{count}}개 항목이 내보내졌습니다`,imported:`{{added}}개 항목 가져옴 ({{skipped}}개 건너뜀)`,importFailed:`가져오기 실패: 잘못된 JSON 형식`,exportTooltip:`JSON으로 카탈로그 내보내기`,importTooltip:`JSON에서 카탈로그 가져오기`,resetTooltip:`기본값으로 초기화`,selectedCount:`{{count}}개 선택됨`,deleteSelected:`선택 항목 삭제`,bulkDeleteConfirm:`{{count}}개 항목을 삭제하시겠습니까?`,bulkDeleted:`{{count}}개 항목이 삭제되었습니다`,bulkDeleteFailed:`항목 삭제 실패`,material:`재료`,spoolWeight:`스풀 무게`,color:`색상`,updateSpoolWeight:`스풀 무게 업데이트`,filamentUpdated:`필라멘트가 업데이트되었습니다`,filamentUpdateFailed:`필라멘트 업데이트 실패`,filamentUpdateInvalid:`잘못된 필라멘트 데이터`,keepExistingSpoolWeight:`기존 스풀에 이전 무게 유지`,keepExistingSpoolWeightDesc:`이 필라멘트 유형으로 이미 생성된 스풀은 이전 공 무게를 유지합니다. 새 스풀은 업데이트된 값을 사용합니다.`,applyToAllSpools:`모든 스풀에 적용`,applyToAllSpoolsDesc:`이 필라멘트 유형의 모든 무게 계산이 즉시 새 공 무게를 사용합니다.`},colorCatalog:{title:`색상 카탈로그`,description:`제조사/재료별 필라멘트 색상. 스풀 추가 시 자동 색상 조회에 사용됩니다.`,searchColors:`색상 검색...`,allManufacturers:`모든 제조사`,addNewColor:`새 색상 추가`,manufacturer:`제조사`,colorName:`색상 이름`,hex:`헥스`,materialOptional:`재료 (선택사항)`,showing:`{{total}}개 중 {{filtered}}개 색상 표시`,noMatch:`검색에 일치하는 색상 없음`,empty:`카탈로그에 색상 없음`,deleteColor:`색상 삭제`,deleteConfirm:`"{{name}}"을(를) 삭제하시겠습니까?`,resetCatalog:`색상 카탈로그 초기화`,resetConfirm:`카탈로그를 기본값으로 초기화하시겠습니까? 모든 사용자 지정 색상이 제거됩니다.`,sync:`동기화`,starting:`시작 중...`,syncTooltip:`FilamentColors.xyz에서 동기화 (2000개 이상 색상, 약 1분 소요)`,loadFailed:`색상 카탈로그 로드 실패`,fieldsRequired:`제조사, 색상 이름, 헥스 색상이 필요합니다`,colorAdded:`색상이 추가되었습니다`,addFailed:`색상 추가 실패`,colorUpdated:`색상이 업데이트되었습니다`,updateFailed:`색상 업데이트 실패`,colorDeleted:`색상이 삭제되었습니다`,deleteFailed:`색상 삭제 실패`,resetSuccess:`색상 카탈로그가 기본값으로 초기화되었습니다`,resetFailed:`카탈로그 초기화 실패`,syncUpToDate:`이미 최신 상태 ({{count}}개 색상 확인됨)`,syncComplete:`{{added}}개 새 색상 추가됨 ({{skipped}}개 이미 존재)`,syncError:`동기화 오류`,syncFailed:`FilamentColors.xyz에서 동기화 실패`,exported:`{{count}}개 색상이 내보내졌습니다`,imported:`{{added}}개 색상 가져옴 ({{skipped}}개 건너뜀)`,importFailed:`가져오기 실패: 잘못된 JSON 형식`,selectedCount:`{{count}}개 선택됨`,deleteSelected:`선택 항목 삭제`,bulkDeleteConfirm:`{{count}}개 색상을 삭제하시겠습니까?`,bulkDeleted:`{{count}}개 색상이 삭제되었습니다`,bulkDeleteFailed:`색상 삭제 실패`},dateFormat:`날짜 형식`,dateFormatUs:`미국 (MM/DD/YYYY)`,dateFormatEu:`유럽 (DD/MM/YYYY)`,dateFormatIso:`ISO (YYYY-MM-DD)`,timeFormat:`시간 형식`,timeFormat12:`12시간 (오후 3:30)`,timeFormat24:`24시간 (15:30)`,defaultPrinter:`기본 프린터`,defaultPrinterDescription:`업로드, 재인쇄 등 작업에서 이 프린터를 미리 선택합니다.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`사이드바 레이아웃에서 항목 순서를 변경하고, 표시 상태를 초기화하고, 사용자 지정 링크를 관리하세요.`,setDefault:`기본값 설정`,sidebarOrderSetDefaultHint:`기본값 설정은 현재 메뉴 순서를 사용자 지정하지 않은 사용자에게 적용합니다.`,sidebarDefaultSet:`기본 메뉴 순서가 설정되었습니다.`,sidebarDefaultCleared:`기본 메뉴 순서가 지워졌습니다.`,sidebarDefaultFailed:`기본 메뉴 순서 설정 실패.`,reset:`초기화`,darkMode:`다크 모드`,lightMode:`라이트 모드`,active:`(활성)`,background:`배경`,accent:`강조`,style:`스타일`,bgNeutral:`중립`,bgWarm:`따뜻함`,bgCool:`시원함`,bgOled:`OLED 블랙`,bgSlate:`슬레이트 블루`,bgForest:`포레스트 그린`,accentGreen:`그린`,accentTeal:`틸`,accentBlue:`블루`,accentOrange:`오렌지`,accentPurple:`퍼플`,accentRed:`레드`,styleClassic:`클래식`,styleGlow:`글로우`,styleVibrant:`비브런트`,themeToggleHint:`사이드바의 태양/달 아이콘으로 다크 모드와 라이트 모드를 전환하세요.`,progressInTitle:`탭에 인쇄 진행률 표시`,progressInTitleDescription:`브라우저 탭에 진행 중인 인쇄의 백분율과 진행 링을 표시합니다.`,autoArchivePrints:`인쇄 자동 아카이브`,autoArchiveDescription:`인쇄 완료 시 3MF 파일 자동 저장`,saveThumbnailsDescription:`3MF 파일에서 미리보기 이미지 추출 및 저장`,captureFinishPhotoDescription:`인쇄 완료 시 프린터 카메라로 사진 촬영. Bambuddy는 인쇄 중 짧은 타임랩스를 기록하여 베드가 내려가기 전 순간에서 사진을 가져올 수 있도록 합니다. 이 인쇄에 대해 타임랩스를 활성화한 경우 타임랩스 파일이 보관되며, 그렇지 않으면 사진 촬영 후 자동으로 삭제됩니다.`,finishPhotoRestorePlate:`완료 사진을 위해 베드 올리기`,finishPhotoRestorePlateDescription:`프린터는 인쇄가 끝나면 베드를 약 100 mm 내리므로 완성된 출력물이 카메라 화각 아래에 놓입니다. Bambuddy는 베드를 마지막 인쇄 레이어 바로 위까지 다시 올려 사진을 찍은 뒤 다시 내립니다. 출력 높이를 알 수 없거나 다른 작업이 대기 중이면 건너뜁니다.`,ffmpegNotInstalled:`ffmpeg 미설치`,ffmpegRequired:`카메라 캡처에 ffmpeg가 필요합니다. macOS에서는 <brew>brew install ffmpeg</brew>, Linux에서는 <apt>apt install ffmpeg</apt>로 설치하세요.`,camera:`카메라`,cameraViewMode:`카메라 보기 모드`,cameraOverlayDescription:`카메라가 메인 화면의 크기 조절 가능한 오버레이에서 열립니다`,cameraWindowDescription:`카메라가 별도의 브라우저 창에서 열립니다`,externalCamerasDescription:`내장 프린터 카메라를 교체할 외부 카메라를 설정하세요. MJPEG 스트림, RTSP, HTTP 스냅샷, USB 카메라(V4L2)를 지원합니다.`,cameraPlaceholderUsb:`장치 경로 (/dev/video0)`,cameraPlaceholderUrl:`카메라 URL (rtsp://... 또는 http://...)`,cameraTypeMjpeg:`MJPEG 스트림`,cameraTypeRtsp:`RTSP 스트림`,cameraTypeSnapshot:`HTTP 스냅샷`,cameraTypeUsb:`USB 카메라 (V4L2)`,cameraSnapshotUrl:`스냅샷 URL (선택사항)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`알림 썸네일, 완료 사진, 타임랩스, 플레이트 감지에 사용되는 단일 프레임 URL.`,cameraRotation:`회전`,test:`테스트`,connected:`연결됨`,disconnected:`연결 끊김`,currency:`통화`,defaultFilamentCost:`기본 필라멘트 비용 (kg당)`,electricityCost:`kWh당 전기 비용`,energyDisplayMode:`에너지 표시 모드`,energyModePrintDescription:`대시보드가 인쇄 중 사용된 에너지 합계를 표시`,energyModeTotalDescription:`대시보드가 스마트 플러그의 전체 에너지를 표시`,fileManager:`파일 관리자`,createArchiveEntry:`인쇄 시 아카이브 항목 생성`,createArchiveEntryDescription:`파일 관리자에서 인쇄할 때 선택적으로 아카이브 항목 생성`,lowDiskSpaceWarning:`디스크 공간 부족 경고`,lowDiskSpaceDescription:`여유 디스크 공간이 이 임계값 아래로 떨어지면 경고 표시`,printerFirmware:`프린터 펌웨어`,checkFirmwareDescription:`Bambu Lab의 프린터 펌웨어 업데이트 확인`,bambuddySoftware:`Bambuddy 소프트웨어`,autoCheckDescription:`시작 시 자동으로 새 버전 확인`,checkNow:`지금 확인`,updateAvailableVersion:`업데이트 가능: v{{version}}`,releaseNotes:`릴리스 노트`,updateViaDocker:`Docker Compose로 업데이트:`,composeDirectory:`Compose 디렉터리`,composeDirectoryHint:`docker-compose.yml이 있는 디렉터리입니다. 비워 두면 cd를 생략합니다.`,copyUpdateCommand:`업데이트 명령 복사`,updateViaHomeAssistant:`업데이트는 Home Assistant 수퍼바이저에서 관리됩니다. Home Assistant에서 설정 → 애드온 → Bambuddy를 열어 새 버전을 설치하세요.`,updateViaWindowsInstaller:`Windows 설치본은 설치 프로그램을 다시 실행하여 업데이트합니다. 아래에서 새 버전을 다운로드하세요 — 데이터, 설정 및 프린터는 유지됩니다.`,downloadWindowsInstaller:`v{{version}} 설치 프로그램 다운로드`,installUpdate:`업데이트 설치`,latestVersionRunning:`최신 버전을 실행 중입니다`,failedToCheckUpdates:`업데이트 확인 실패: {{error}}`,backupRestore:`백업 및 복원`,backupRestoreDescription:`설정 내보내기/가져오기 및 GitHub 백업 설정`,goToBackup:`백업으로 이동`,externalUrl:`외부 URL`,externalUrlDescription:`Bambuddy에 접근할 수 있는 외부 URL. 알림 이미지 및 외부 통합에 사용됩니다.`,bambuddyUrl:`Bambuddy URL`,externalUrlHint:`프로토콜과 포트를 포함하세요 (예: http://192.168.1.100:8000)`,ftpRetry:`FTP 재시도`,ftpRetryDescription:`프린터 WiFi가 불안정할 때 FTP 작업을 재시도합니다.`,autoRetryDescription:`실패한 FTP 작업 자동 재시도`,retryAttempts:`재시도 횟수`,retryDelay:`재시도 지연`,connectionTimeout:`연결 제한 시간`,time_one:`{{count}}번`,time_other:`{{count}}번`,second_one:`{{count}}초`,second_other:`{{count}}초`,nSeconds:`{{count}}초`,increaseForWeakWifi:`WiFi가 약한 프린터에서 늘리세요`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Home Assistant의 REST API를 통해 스마트 플러그를 제어하려면 연결하세요.`,homeAssistantUrl:`Home Assistant URL`,longLivedAccessToken:`장기 액세스 토큰`,haTokenHint:`HA에서 토큰 생성: 프로필 → 장기 액세스 토큰 → 토큰 생성`,connectionSuccessful:`연결 성공`,connectionFailed:`연결 실패`,haConnectionSuccess:`Home Assistant에 성공적으로 연결되었습니다.`,haConnectionFailed:`Home Assistant 연결 실패.`,mqttPublishing:`MQTT 게시`,mqttDescription:`Node-RED, Home Assistant 등 자동화 시스템과 통합하기 위해 Bambuddy 이벤트를 외부 MQTT 브로커에 게시하세요.`,mqttEnableDescription:`외부 MQTT 브로커에 이벤트 게시`,brokerHostname:`브로커 호스트명`,port:`포트`,usernameOptional:`사용자명 (선택사항)`,passwordOptional:`비밀번호 (선택사항)`,topicPrefix:`토픽 접두사`,topicPrefixHint:`토픽은 다음과 같습니다: {{prefix}}/printers/<serial>/status 등`,prometheusMetrics:`Prometheus 메트릭`,prometheusEndpointDescription:`Prometheus/Grafana 모니터링을 위해 <code>/api/v1/metrics</code>에서 프린터 메트릭을 노출합니다.`,bearerTokenOptional:`베어러 토큰 (선택사항)`,bearerTokenHint:`설정하면 요청에 <code>Authorization: Bearer <token></code>을 포함해야 합니다`,metricsConnectionStatus:`연결 상태`,metricsPrinterState:`프린터 상태 (유휴/인쇄 중/등)`,metricsPrintProgress:`인쇄 진행 0-100%`,metricsBedTemp:`베드 온도`,metricsNozzleTemp:`노즐 온도`,metricsPrintsTotal:`결과별 총 인쇄 수`,metricsMore:`...및 더 많은 것 (레이어, 팬, 대기열, 필라멘트 사용량)`,smartPlugsDescription:`에너지 사용량 추적 및 프린터 전원 제어를 자동화하기 위해 스마트 플러그(Tasmota 또는 Home Assistant)를 연결하세요.`,allOn:`모두 켜기`,allOff:`모두 끄기`,addSmartPlug:`스마트 플러그 추가`,energySummary:`에너지 요약`,currentPower:`현재 전력`,plugsOnline:`{{reachable}}/{{total}}개 플러그 온라인`,today:`오늘`,yesterday:`어제`,total:`총계`,enablePlugsForSummary:`에너지 요약을 보려면 플러그를 활성화하세요`,addNotificationProvider:`추가`,systemBadge:`(시스템)`,creating:`생성 중...`,changing:`변경 중...`,deleteUserAndItems:`사용자 및 항목 삭제`,deleteUserKeepItems:`사용자 삭제, 항목 유지 (소유자 없음)`,ok:`확인`,twoFa:{totpTitle:`인증 앱 (TOTP)`,totpDesc:`Google Authenticator, Aegis, Authy 같은 인증 앱을 사용하세요.`,emailOtpTitle:`이메일 OTP`,emailOtpDesc:`로그인 시 {{email}}로 일회용 코드를 전송합니다.`,emailOtpNoEmail:`이 방법을 활성화하려면 계정에 이메일 주소를 추가하세요.`,addEmailFirst:`계정에 이메일 주소가 없습니다. 이메일 OTP를 활성화하기 전에 관리자에게 추가를 요청하세요.`,setupTotp:`인증 앱 설정`,setupAuthApp:`인증 앱 설정`,setupInstructions:`아래 QR 코드를 인증 앱으로 스캔한 후 코드로 확인하세요.`,manualEntry:`스캔할 수 없나요? 이 비밀을 수동으로 입력하세요:`,scannedContinue:`코드를 스캔했습니다 — 계속`,enterCodeToConfirm:`인증 앱의 6자리 코드를 입력하여 설정을 확인하세요.`,activate:`활성화`,disableTotp:`인증기 비활성화`,disableConfirmHint:`인증기를 비활성화하려면 유효한 TOTP 코드나 백업 코드를 입력하세요.`,totpDisabled:`인증 앱이 비활성화되었습니다.`,emailOtpEnabled:`이메일 OTP가 활성화되었습니다.`,emailOtpDisabled:`이메일 OTP가 비활성화되었습니다.`,smtpRequired:`먼저 SMTP 설정을 구성하고 테스트하세요.`,invalidCode:`잘못된 코드입니다. 다시 시도하세요.`,enableEmailOtp:`이메일 OTP 활성화`,disableEmailOtp:`이메일 OTP 비활성화`,emailSetupEnterCode:`이메일 주소로 인증 코드가 전송되었습니다. 아래에 입력하여 이 받은 편지함을 소유하고 있음을 확인하세요.`,verifyAndEnable:`확인 및 활성화`,emailDisablePasswordHint:`이메일 OTP 비활성화를 확인하려면 계정 비밀번호를 입력하세요.`,passwordPlaceholder:`비밀번호 입력`,backupCodesTitle:`백업 코드 저장`,backupCodesWarning:`이 코드를 안전한 곳에 저장하세요. 각 코드는 한 번만 사용할 수 있으며 다시 표시되지 않습니다.`,backupCodesRemaining:`{{count}}개 백업 코드 남음`,savedCodes:`코드를 저장했습니다`,regenBackup:`백업 코드 재생성`,regenBackupHint:`현재 TOTP 코드를 입력하여 10개의 새 백업 코드를 생성하세요. 기존 백업 코드는 모두 무효화됩니다.`,newBackupCodes:`새 백업 코드`,linkedAccounts:`연결된 SSO 계정`,linkedAccountsDesc:`이 외부 ID 제공자가 계정에 연결되어 있습니다.`,oidcUnlinked:`계정 연결이 해제되었습니다.`},sessionPolicy:{title:`세션 정책`,description:`신규 사용자 로그인의 최대 세션 수명입니다. 이미 발급된 토큰은 원래 만료 시간을 유지합니다.`,preset24h:`24시간`,preset7d:`7일`,preset30d:`30일`,customHoursLabel:`사용자 지정 세션 수명(시간)`,hoursSuffix:`시간`,warning:`세션이 길어질수록 자동 로그아웃 보호가 약해집니다. 신뢰할 수 있는 단일 사용자 배포에서만 권장됩니다.`},oidc:{title:`SSO / OIDC 제공자`,desc:`외부 ID 제공자를 통해 싱글 사인온을 허용하도록 OpenID Connect 제공자를 설정하세요.`,addProvider:`제공자 추가`,newProvider:`새 제공자`,empty:`아직 설정된 OIDC 제공자가 없습니다.`,created:`제공자가 생성되었습니다.`,updated:`제공자가 업데이트되었습니다.`,deleted:`제공자가 삭제되었습니다.`,deleteTitle:`제공자 삭제`,deleteMessage:`"{{name}}"을(를) 삭제하시겠습니까? 연결된 모든 사용자 계정의 연결이 해제됩니다.`,form:{name:`표시 이름`,issuerUrl:`발급자 URL`,clientId:`클라이언트 ID`,clientSecret:`클라이언트 시크릿`,scopes:`범위`,iconUrl:`아이콘 URL (선택사항)`,enabled:`활성화됨`,autoCreate:`사용자 자동 생성`,autoCreateDesc:`첫 번째 로그인 시 자동으로 로컬 계정 생성.`,autoLink:`기존 계정 자동 연결`,autoLinkDesc:`첫 번째 로그인 시 이메일 일치로 기존 로컬 계정 연결.`,secretHint:`현재 값을 유지하려면 비워두세요`,secretPlaceholder:`새 시크릿`,emailClaim:`이메일 클레임`,emailClaimDesc:`이메일 ID로 사용되는 JWT 클레임.`,emailClaimPlaceholder:`email`,emailClaimCustomClaimAutoLinkWarning:`사용자 지정 클레임은 값이 테넌트 관리인 경우에만 자동 연결에 안전합니다. IdP가 사용자가 이 클레임을 직접 주장할 수 있게 하면 자동 연결을 활성화하지 마세요.`,requireEmailVerified:`이메일 확인 필요`,requireEmailVerifiedDesc:`제공자가 확인된 것으로 표시한 경우에만 이메일 클레임을 수락합니다.`,requireEmailVerifiedWarning:`경고: 확인 없이도 이메일이 수락됩니다. 신뢰할 수 있는 제공자에만 사용하세요.`,requireEmailVerifiedAutoLink:`이 설정을 변경하려면 먼저 자동 연결을 비활성화하세요.`,defaultGroup:`기본 그룹`,defaultGroupDesc:`자동 생성된 사용자에게 할당되는 그룹. 설정되지 않으면 Viewers로 대체됩니다.`,defaultGroupViewersFallback:`Viewers (기본값)`,autologin:`자동 로그인`,autologinDesc:`인증되지 않은 방문자를 이 공급자로 바로 리디렉션합니다. 이 플래그를 가질 수 있는 공급자는 하나뿐입니다.`},refreshIcon:`아이콘 새로고침`,removeIcon:`아이콘 제거`,iconRefreshed:`아이콘이 새로고침되었습니다.`,iconRemoved:`아이콘이 제거되었습니다.`,iconFetchFailed:`공급자 URL에서 아이콘을 가져올 수 없습니다.`},encryption:{title:`MFA 암호화 상태`,enabledFromEnv:`저장 시 암호화 활성화됨 (MFA_ENCRYPTION_KEY 환경 변수에서 키)`,enabledFromFile:`저장 시 암호화 활성화됨 (데이터 디렉토리에서 키 로드됨)`,enabledGenerated:`자동 생성된 키로 저장 시 암호화 활성화됨`,notConfigured:`저장 시 암호화가 설정되지 않음`,notConfiguredDesc:`TOTP 시크릿 및 OIDC client_secret이 일반 텍스트로 저장됩니다. MFA_ENCRYPTION_KEY를 설정하거나 쓰기 가능한 데이터 디렉토리로 Bambuddy를 재시작하여 자동 생성하세요.`,allEncrypted:`모든 MFA 시크릿이 저장 시 암호화되어 있습니다.`,legacyRowsLabel:`레거시 일반 텍스트 행`,encryptedRowsLabel:`암호화된 행`,legacyRowsWarning:`{{count}}개 레거시 일반 텍스트 행이 감지되었습니다. 암호화된 저장소로 마이그레이션하려면 OIDC 제공자를 다시 저장하거나 사용자의 인증 앱을 재등록하세요.`,backupHint:`자동 생성된 키는 DATA_DIR/.mfa_encryption_key에 저장되며 로컬 백업 ZIP에 포함됩니다. 백업을 안전하게 보관하거나 MFA_ENCRYPTION_KEY를 명시적으로 설정하세요.`,decryptionBrokenTitle:`암호화 키 누락`,decryptionBrokenError:`암호화 키를 더 이상 사용할 수 없어 {{count}}개의 암호화된 레코드를 복호화할 수 없습니다.`,migrationErrorWarning:`시작 시 {{count}}개 레거시 행을 재암호화하지 못했습니다. 서버 로그를 확인하고 Bambuddy를 재시작하여 재시도하세요.`},updateEnergyCost:`전기 요금 업데이트`,updateEnergyCostDescription:`이 키가 /settings/electricity-price에 새 kWh당 전기 요금을 POST할 수 있도록 허용합니다. Home Assistant 동적 요금 자동화(Tibber, Octopus 등)에 유용합니다. API 키로 쓸 수 있는 유일한 설정 필드입니다.`,energyCostBadge:`에너지`,passwordRequirements:`최소 8자, 대문자, 소문자, 숫자, 특수문자 각 1개 이상 포함`,pipelineLimits:{title:`슬라이서 파이프라인 한도`,maxCopiesLabel:`실행당 최대 사본 수`,maxCopiesDesc:`운영자가 파이프라인 실행 시 요청할 수 있는 사본 수의 상한. 서버 측 절대 상한은 1000입니다.`},pipelines:{title:`슬라이서 파이프라인`,subtitle:`재사용 가능한 프리셋 묶음(프린터 + 프로세스 + 필라멘트 + 베드 유형). 슬라이스 대화상자에서 저장한 후 다음 파일에 한 번의 클릭으로 적용하세요.`,loading:`파이프라인 불러오는 중…`,loadError:`파이프라인을 불러오지 못했습니다.`,confirmDelete:`이 파이프라인을 삭제하시겠습니까? 되돌릴 수 없습니다.`,staleWarning:`참조된 프리셋이 더 이상 존재하지 않습니다. 슬라이스 대화상자에서 이 파이프라인을 다시 저장하여 수정하세요.`,empty:{title:`아직 파이프라인이 없습니다.`,howto:`임의의 파일에서 슬라이스 대화상자를 열고 프린터 / 프로세스 / 필라멘트 / 베드를 선택한 다음 "파이프라인으로 저장"을 클릭하세요. 저장된 파이프라인이 여기에 표시됩니다.`},field:{name:`파이프라인 이름`,description:`설명`,targetPrinter:`대상 프린터`,noTarget:`— 대상 없음 —`,targetKind:`대상 유형`,targetKindSpecific:`특정 프린터`,targetKindClass:`프린터 클래스`,targetModelClass:`프린터 모델`,fanoutStrategy:`분산 전략`,fanout:{max_parallel:`최대 병렬 — 일치하는 유휴 프린터에 분산`,round_robin:`라운드 로빈 — 적격 프린터를 순환`,fill_one_first:`하나 먼저 채우기 — 모든 사본을 한 프린터에 고정`},fanoutShort:{max_parallel:`병렬`,round_robin:`라운드 로빈`,fill_one_first:`하나 먼저`}},action:{save:`저장`,cancel:`취소`,rename:`이름 변경`,delete:`삭제`},slot:{printer:`프린터`,process:`프로세스`,filament:`필라멘트`,filamentN:`필라멘트 {{n}}`,filamentAll:`전체 {{n}} 슬롯`,bed:`베드`},group:{profiles:`프로필`,filaments:`필라멘트`},searchPlaceholder:`파이프라인 검색…`,filterTargetType:`대상 유형으로 필터`,filterTarget:`대상으로 필터`,filter:{all:`모든 대상`,noTarget:`대상 미설정`,count:`{{shown}} / {{total}}`,noMatches:`현재 필터와 일치하는 파이프라인이 없습니다.`},toast:{saved:`파이프라인이 저장되었습니다`,saveFailed:`저장 실패`,deleted:`파이프라인이 삭제되었습니다`,deleteFailed:`삭제 실패`},noTargetHint:`실행하려면 대상 프린터를 설정하세요`,noTargetWarning:`이 파이프라인을 실행하기 전에 대상 프린터를 설정하세요.`,runs:{lastRun:`마지막 실행`,status:{queued:`대기 중`,slicing:`슬라이싱 중`,dispatching:`전송 중`,in_progress:`인쇄 중`,completed:`완료됨`,failed:`실패`,partial_failure:`부분 실패`,cancelled:`취소됨`}}}},notification:{printStarted:{title:`인쇄 시작됨`,body:`{{printer}}: {{filename}} 인쇄가 시작되었습니다`},printCompleted:{title:`인쇄 완료됨`,body:`{{printer}}: {{filename}}이(가) 성공적으로 완료되었습니다`},printFailed:{title:`인쇄 실패`,body:`{{printer}}: {{filename}}이(가) 실패했습니다`},printStopped:{title:`인쇄 정지됨`,body:`{{printer}}: {{filename}}이(가) 정지되었습니다`},printProgress:{title:`인쇄 진행`,body:`{{printer}}: {{filename}} {{percent}}% 완료`},printerOffline:{title:`프린터 오프라인`,body:`{{printer}}이(가) 오프라인 상태입니다`},printerError:{title:`프린터 오류`,body:`{{printer}}: {{error}}`},filamentLow:{title:`필라멘트 부족`,body:`{{printer}}: 필라멘트가 부족합니다`},maintenanceDue:{title:`유지보수 예정`,body:`{{printer}}: {{items}} 주의 필요`}},errors:{generic:`문제가 발생했습니다`,networkError:`네트워크 오류. 연결을 확인하세요.`,notFound:`찾을 수 없습니다`,unauthorized:`권한 없음`,serverError:`서버 오류`,validationError:`입력값을 확인하세요`,printerConnectionFailed:`프린터 연결 실패`,saveFailed:`변경사항 저장 실패`,deleteFailed:`삭제 실패`,loadFailed:`데이터 로드 실패`},hmsErrors:{title:`오류 - {{name}}`,noErrors:`오류 없음`,viewOnWiki:`Bambu Lab 위키에서 보기`,mqttVerifyFailedRemedy:`프린터에서 개발자 모드를 활성화하고 프린터를 재시작한 다음 작업을 다시 시작하세요.`,unknownCode:`알 수 없는 HMS 코드 — 자세한 내용은 Bambu Lab 위키를 참조하세요.`,clearInstructions:`오류를 해제하려면 프린터에서 오류를 지우세요.`,clearErrors:`오류 지우기`,clearSuccess:`HMS 오류가 지워졌습니다`,clearFailed:`HMS 오류 지우기 실패`,actionSuccess:`프린터에 작업을 전송함`,actionFailed:`작업 전송 실패`,runoutExpectedSlot:`{{ranOut}}의 필라멘트가 소진되었습니다. 프린터가 이제 {{expected}}에 호환 필라멘트를 기다리고 있습니다. {{expected}}에 스풀을 넣은 다음 다시 시도를 선택하세요.`,runoutExpectedSlotOnly:`프린터가 {{expected}}에 호환 필라멘트를 기다리고 있습니다. 거기에 스풀을 넣은 다음 다시 시도를 선택하세요.`,runoutSlotUnknown:`필라멘트가 소진되어 인쇄가 일시정지되었습니다. Bambuddy가 프린터가 현재 요청하는 슬롯을 확인할 수 없습니다 — 프린터 화면에서 요청된 슬롯을 확인하세요.`,actions:{RESUME_PRINTING:`인쇄 재개`,RESUME_PRINTING_DEFECTS:`재개 (결함 허용)`,RESUME_PRINTING_PROBELM_SOLVED:`재개 (문제 해결됨)`,STOP_PRINTING:`인쇄 중지`,CHECK_ASSISTANT:`도우미 보기`,FILAMENT_EXTRUDED:`필라멘트 압출됨, 계속`,RETRY_FILAMENT_EXTRUDED:`아직 압출되지 않음, 다시 시도`,CONTINUE:`완료, 계속`,LOAD_VIRTUAL_TRAY:`필라멘트 로드`,OK_BUTTON:`확인`,FILAMENT_LOAD_RESUME:`필라멘트 로드됨, 재개`,JUMP_TO_LIVEVIEW:`실시간 보기`,NO_REMINDER_NEXT_TIME:`다음에 알리지 않음`,REFRESH_NOZZLE:`다시 확인`,IGNORE_NO_REMINDER_NEXT_TIME:`무시 및 다시 알리지 않음`,IGNORE_RESUME:`무시하고 재개`,PROBLEM_SOLVED_RESUME:`문제 해결됨, 재개`,TURN_OFF_FIRE_ALARM:`확인, 화재 경보 끄기`,RETRY_PROBLEM_SOLVED:`다시 시도 (문제 해결됨)`,CANCLE:`취소`,STOP_DRYING:`건조 중지`,PROCEED:`계속`,OK_JUMP_RACK:`확인`,ABORT:`중단`,DISABLE_PURIFICATION:`이 인쇄에 대해 공기 정화 비활성화`,DONT_REMIND_NEXT_TIME:`알리지 않음`,DBL_CHECK_CANCEL:`취소`,DBL_CHECK_DONE:`완료`,DBL_CHECK_RETRY:`다시 시도`,DBL_CHECK_RESUME:`재개`,DBL_CHECK_OK:`확인`,REMOVE_CLOSE_BTN:`닫기`}},mqttDebug:{title:`MQTT 디버그 로그`,searchPlaceholder:`토픽 또는 페이로드 검색...`,noMessages:`아직 기록된 메시지 없음`,startLoggingHint:`"로깅 시작"을 클릭하여 MQTT 메시지 캡처 시작`,noMessagesMatch:`필터에 일치하는 메시지 없음`,adjustFilterHint:`검색 또는 필터 기준을 조정해 보세요`,incoming:`수신`,outgoing:`송신`,loggingStopped:`로깅 정지됨`,loggingActive:`로깅 활성 - 메시지가 자동 새로고침됨`,startLogging:`로깅 시작`,stopLogging:`로깅 정지`,clearLog:`로그 지우기`,topic:`토픽`,timestamp:`타임스탬프`,direction:`방향`,all:`전체`},printerFiles:{zipStarted_one:`{{count}}개 파일의 ZIP 다운로드를 시작했습니다`,zipStarted_other:`{{count}}개 파일의 ZIP 다운로드를 시작했습니다`,zipPartial:`{{total}}개 중 {{successful}}개 파일로 ZIP 다운로드를 시작했습니다. 나머지는 가져오지 못했습니다`,downloadFailed:`다운로드 실패: {{error}}`,unknownError:`알 수 없는 오류`,shiftSelectHint:`Shift 키를 누른 채 클릭하여 범위 선택`,selectFile:`{{name}} 선택`,deselectFile:`{{name}} 선택 해제`,title:`파일 관리자`,storageUsed:`사용됨:`,storageFree:`여유:`,filterPlaceholder:`파일 필터...`,deleteButton:`삭제`,deleteFiles:`{{count}}개 파일 삭제`,deleteFileConfirm:`"{{name}}"을(를) 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.`,deleteFilesConfirm:`선택된 {{count}}개 파일을 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.`,noFiles:`프린터에 파일 없음`,printerUnavailable:`프린터 파일 서비스를 사용할 수 없습니다. 프린터에 연결할 수 있을 때 다시 시도하세요.`,loadingFiles:`파일 로딩 중...`,failedToLoad:`파일 로드 실패`,toast:{filesDeleted:`{{count}}개 파일이 삭제되었습니다`,deleteFailed:`삭제 실패: {{error}}`}},confirm:{delete:`이것을 삭제하시겠습니까?`,unsavedChanges:`저장되지 않은 변경사항이 있습니다. 정말 나가시겠습니까?`,clearQueue:`대기열을 지우시겠습니까?`},login:{title:`Bambuddy 로그인`,subtitle:`계정에 로그인하세요`,username:`사용자명`,usernamePlaceholder:`사용자명을 입력하세요`,usernameOrEmail:`사용자명 또는 이메일`,usernameOrEmailPlaceholder:`사용자명 또는 @ 이메일`,password:`비밀번호`,passwordPlaceholder:`비밀번호를 입력하세요`,signIn:`로그인`,signingIn:`로그인 중...`,rememberMe:`로그인 유지`,forgotPassword:`비밀번호를 잊으셨나요?`,autologinFailed:`SSO 자동 로그인에 실패했습니다. 아래에서 계속할 공급자를 선택하세요.`,localDisabledNotice:`로컬 로그인이 비활성화되어 있습니다. 아래 SSO 공급자 중 하나를 사용하세요.`,loginSuccess:`성공적으로 로그인되었습니다`,loginFailed:`로그인 실패`,enterCredentials:`사용자명과 비밀번호를 입력하세요`,enterEmail:`이메일 주소를 입력하세요`,oidcLoginFailed:`OIDC 로그인 실패`,oidcErrors:{providerError:`ID 제공자에서 오류가 반환되었습니다`,missingParameters:`OIDC 콜백에 필수 매개변수가 없습니다`,invalidState:`OIDC 상태가 잘못되었거나 이미 사용되었습니다`,stateExpired:`OIDC 로그인 세션이 만료되었습니다 — 다시 시도하세요`,providerNotFound:`OIDC 제공자를 찾을 수 없습니다`,discoveryFailed:`OIDC 검색 문서를 가져오지 못했습니다`,invalidDiscovery:`OIDC 검색 문서가 잘못되었습니다`,networkError:`OIDC 토큰 교환 중 네트워크 오류`,badResponse:`OIDC 토큰 교환 중 예상치 못한 응답`,noIdToken:`OIDC 제공자가 ID 토큰을 반환하지 않았습니다`,validationFailed:`OIDC 토큰 검증 실패`,nonceMismatch:`OIDC 논스 불일치 — 재생 공격 가능성`,missingSubClaim:`OIDC 토큰에 sub 클레임이 없습니다`,noLinkedAccount:`OIDC ID에 연결된 로컬 계정이 없습니다`,accountInactive:`계정이 비활성 상태입니다`,userResolutionFailed:`계정 확인 실패`,internalError:`OIDC 로그인 중 내부 오류 발생`,tokenExchangeFailed:`OIDC 토큰 교환 실패`},forgotPasswordTitle:`비밀번호 찾기`,forgotPasswordMessage:`비밀번호를 잊으셨다면 시스템 관리자에게 초기화를 요청하세요.`,forgotPasswordEmailMessage:`이메일 주소를 입력하면 새 비밀번호를 전송해 드립니다.`,emailAddress:`이메일 주소`,emailPlaceholder:`your.email@example.com`,cancel:`취소`,sending:`전송 중...`,sendResetEmail:`초기화 이메일 전송`,howToReset:`비밀번호 초기화 방법:`,resetStep1:`Bambuddy 관리자에게 문의하세요`,resetStep2:`사용자 관리에서 비밀번호 초기화를 요청하세요`,resetStep3:`관리자가 임시 비밀번호를 설정해 드립니다`,resetStep4:`새 비밀번호로 로그인하고 설정에서 변경하세요`,gotIt:`확인`,resetPassword:{title:`새 비밀번호 설정`,subtitle:`아래에 새 비밀번호를 입력하고 확인하세요.`,newPassword:`새 비밀번호`,newPasswordPlaceholder:`최소 8자`,confirmPassword:`비밀번호 확인`,confirmPasswordPlaceholder:`새 비밀번호 반복`,saving:`저장 중…`,submit:`새 비밀번호 설정`,backToLogin:`로그인으로 돌아가기`,passwordsDoNotMatch:`비밀번호가 일치하지 않습니다`,passwordTooShort:`비밀번호는 최소 8자여야 합니다`,resetFailed:`비밀번호 초기화 실패. 링크가 만료되었을 수 있습니다.`},twoFA:{title:`이중 인증`,subtitle:`계정이 2FA로 보호되어 있습니다. 아래에 인증 코드를 입력하세요.`,methodAuthenticator:`인증 앱`,methodEmail:`이메일 코드`,methodBackup:`백업 코드`,instructionsTotp:`인증 앱을 열고 Bambuddy의 6자리 코드를 입력하세요.`,instructionsEmail:`이메일 주소로 6자리 코드가 전송되었습니다. 10분 후 만료됩니다.`,instructionsEmailNotSent:`아래 버튼을 클릭하여 이메일로 인증 코드를 받으세요.`,instructionsBackup:`8자리 백업 복구 코드 중 하나를 입력하세요. 각 코드는 한 번만 사용할 수 있습니다.`,sendCodeButton:`이메일로 코드 전송`,sendingCode:`전송 중...`,resendCode:`코드 재전송`,codeLabel:`인증 코드`,backupCodeLabel:`백업 코드`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`확인`,verifyingButton:`확인 중...`,backToLogin:`← 로그인으로 돌아가기`,orContinueWith:`또는 계속`,signInWith:`{{provider}}로 로그인`,enterCode:`인증 코드를 입력하세요`,sendCodeFailed:`인증 코드 전송 실패`,invalidCode:`잘못된 코드입니다. 다시 시도하세요.`}},setup:{title:`Bambuddy 설정`,subtitle:`Bambuddy 인스턴스의 인증을 설정하세요`,enableAuth:`인증 활성화`,adminAccount:`관리자 계정`,adminAccountDesc:`관리자 사용자가 이미 있는 경우 기존 관리자 계정으로 인증이 활성화됩니다. 기존 관리자를 사용하려면 아래 필드를 비워두거나, 새 관리자 사용자를 만들려면 자격 증명을 입력하세요.`,adminUsername:`관리자 사용자명`,adminPassword:`관리자 비밀번호`,optionalIfAdminExists:`(관리자 사용자가 있는 경우 선택사항)`,adminUsernamePlaceholder:`관리자 사용자명 입력 (선택사항)`,adminPasswordPlaceholder:`관리자 비밀번호 입력 (선택사항)`,confirmPassword:`비밀번호 확인`,confirmPasswordPlaceholder:`관리자 비밀번호 확인`,settingUp:`설정 중...`,completeSetup:`설정 완료`,toast:{authEnabledAdminCreated:`인증 활성화 및 관리자 사용자 생성됨`,authEnabledExistingAdmins:`기존 관리자 사용자로 인증 활성화됨`,setupCompleted:`설정이 완료되었습니다`,enterBothCredentials:`관리자 사용자명과 비밀번호를 모두 입력하거나, 기존 관리자 사용자를 사용하려면 둘 다 비워두세요`,passwordsDoNotMatch:`비밀번호가 일치하지 않습니다`,passwordTooShort:`비밀번호는 최소 6자여야 합니다`}},changePassword:{title:`비밀번호 변경`,currentPassword:`현재 비밀번호`,currentPasswordPlaceholder:`현재 비밀번호 입력`,newPassword:`새 비밀번호`,newPasswordPlaceholder:`새 비밀번호 입력 (최소 6자)`,confirmPassword:`새 비밀번호 확인`,confirmPasswordPlaceholder:`새 비밀번호 확인`,passwordsDoNotMatch:`비밀번호가 일치하지 않습니다`,passwordTooShort:`비밀번호는 최소 6자여야 합니다`,changing:`변경 중...`,success:`비밀번호가 성공적으로 변경되었습니다`,failed:`비밀번호 변경 실패`},plateAlert:{title:`인쇄 일시정지됨!`,message:`빌드 플레이트에 객체가 감지되었습니다. 인쇄가 자동으로 일시정지되었습니다. 플레이트를 비우고 인쇄를 재개하세요.`,understand:`확인했습니다`},camera:{title:`카메라 보기`,invalidPrinterId:`유효하지 않은 프린터 ID`,live:`실시간`,snapshot:`스냅샷`,restartStream:`스트림 재시작`,refreshSnapshot:`스냅샷 새로고침`,fullscreen:`전체 화면`,exitFullscreen:`전체 화면 종료`,connectingToCamera:`카메라에 연결 중...`,capturingSnapshot:`스냅샷 캡처 중...`,connectionLost:`연결 끊김`,connectionFailed:`카메라 연결 실패`,reconnecting:`{{countdown}}초 후 재연결 중... (시도 {{attempt}}/{{max}})`,reconnectNow:`지금 재연결`,cameraUnavailable:`카메라를 사용할 수 없음`,cameraUnavailableDesc:`프린터가 켜져 있고 연결되어 있는지 확인하세요.`,noCamera:`사용 가능한 카메라 없음`,retry:`다시 시도`,cameraStream:`카메라 스트림`,zoomOut:`축소`,zoomIn:`확대`,resetZoom:`배율 초기화`,recording:`녹화 중`,startRecording:`녹화 시작`,stopRecording:`녹화 중지`,chamberLight:`챔버 조명 전환`,unavailable:`카메라 사용 불가`,diagnose:{button:`진단`,modalTitle:`카메라 진단`,running:`진단 실행 중...`,runFailed:`진단 실행 실패: {{error}}`,retry:`다시 실행`,stage:{tcp_reachable:`네트워크 연결 가능 여부`,first_frame:`프레임 캡처`,live_stream_active:`라이브 스트림 활성`},summary:{all_ok:`카메라가 정상 작동 중입니다. 모든 단계를 성공적으로 완료했습니다.`,live_stream_active_healthy:`카메라가 최근 프레임으로 스트리밍 중입니다 — 테스트가 필요 없습니다.`,printer_unreachable:`프린터에 연결할 수 없습니다. IP 주소, 네트워크 연결, 프린터 전원을 확인하세요.`,camera_port_closed:`프린터에 연결됐지만 카메라 포트가 닫혀 있습니다. 프린터 설정에서 LAN 전용 모드와 개발자 모드가 활성화되어 있는지 확인하세요.`,no_frame:`카메라에 연결됐지만 프레임이 수신되지 않았습니다. 다시 시도하거나 프린터 설정에서 카메라가 활성화되어 있는지 확인하세요.`,unknown_failure:`알 수 없는 이유로 카메라 진단에 실패했습니다. 지원 로그를 확인하세요.`},meta:{protocol:`프로토콜`,port:`포트`,profile:`프로파일`}}},groups:{title:`그룹 관리`,subtitle:`접근 제어를 위한 권한 그룹 관리`,backToSettings:`설정으로 돌아가기`,createGroup:`그룹 생성`,noPermission:`이 페이지에 접근할 권한이 없습니다.`,system:`시스템`,noDescription:`설명 없음`,usersCount:`{{count}}명의 사용자`,permissionsCount:`{{count}}개의 권한`,edit:`편집`,delete:`삭제`,toast:{created:`그룹이 성공적으로 생성되었습니다`,updated:`그룹이 성공적으로 업데이트되었습니다`,deleted:`그룹이 성공적으로 삭제되었습니다`,enterGroupName:`그룹 이름을 입력해 주세요`},modal:{editGroup:`그룹 편집`,createGroup:`그룹 생성`,cancel:`취소`,saving:`저장 중...`,creating:`생성 중...`,saveChanges:`변경 사항 저장`},form:{groupName:`그룹 이름`,groupNamePlaceholder:`그룹 이름 입력`,systemGroupWarning:`시스템 그룹 이름은 변경할 수 없습니다`,description:`설명`,descriptionPlaceholder:`설명 입력 (선택사항)`,permissions:`권한 ({{count}}개 선택됨)`},deleteModal:{title:`그룹 삭제`,message:`이 그룹을 삭제하시겠습니까? 이 그룹의 사용자는 해당 권한을 잃게 됩니다.`,confirm:`그룹 삭제`},editor:{title:`그룹 편집`,createTitle:`그룹 생성`,search:`권한 검색...`,selectAll:`모두 선택`,clearAll:`모두 해제`,permissionsSelected:`{{count}}개 선택됨`,noResults:`검색과 일치하는 권한이 없습니다`,websocketHint:`실시간 업데이트에 필요합니다. 이 권한이 없으면 인터페이스는 주기적 폴링으로 대체됩니다.`}},users:{title:`사용자 관리`,subtitle:`Bambuddy 인스턴스에 대한 사용자 및 접근 권한 관리`,backToSettings:`설정으로 돌아가기`,createUser:`사용자 생성`,noPermission:`이 페이지에 접근할 권한이 없습니다.`,admin:`관리자`,noGroups:`그룹 없음`,active:`활성`,inactive:`비활성`,edit:`편집`,delete:`삭제`,system:`시스템`,noGroupsAvailable:`사용 가능한 그룹 없음`,table:{username:`사용자 이름`,groups:`그룹`,status:`상태`,actions:`작업`},toast:{created:`사용자가 성공적으로 생성되었습니다`,updated:`사용자가 성공적으로 업데이트되었습니다`,deleted:`사용자가 성공적으로 삭제되었습니다`,fillRequired:`모든 필수 항목을 입력해 주세요`,passwordsDoNotMatch:`비밀번호가 일치하지 않습니다`,passwordTooShort:`비밀번호는 최소 6자 이상이어야 합니다`,ldapProvisioned:`LDAP 사용자 "{{username}}"이(가) 생성되었습니다`},modal:{createUser:`사용자 생성`,editUser:`사용자 편집`,cancel:`취소`,creating:`생성 중...`,saving:`저장 중...`,saveChanges:`변경 사항 저장`,advancedAuthSubtitle:`고급 인증 사용`,tabsAriaLabel:`사용자 소스`,localTab:`로컬`,ldapTab:`LDAP`,ldapSearchLabel:`디렉터리 검색`,ldapSearchPlaceholder:`사용자명, 이름, 이메일을 입력하세요...`,ldapMinChars:`검색하려면 최소 2자 이상 입력하세요`,ldapTypeToSearch:`LDAP 디렉터리를 검색하려면 입력을 시작하세요`,ldapSearching:`디렉터리 검색 중...`,ldapNoResults:`디렉터리에서 일치하는 사용자가 없습니다`,ldapSearchError:`디렉터리 검색에 실패했습니다. LDAP 서버 상태를 확인하세요.`,ldapAlreadyProvisioned:`이미 생성됨`,ldapSelectedLabel:`선택됨`,ldapProvision:`사용자 생성`,ldapProvisioning:`생성 중...`,ldapErrorProvision:`생성에 실패했습니다. LDAP 서버 상태를 확인하고 다시 시도하세요.`},form:{username:`사용자 이름`,usernamePlaceholder:`사용자 이름 입력`,email:`이메일`,emailPlaceholder:`user@example.com`,password:`비밀번호`,passwordPlaceholder:`비밀번호 입력`,confirmPassword:`비밀번호 확인`,confirmPasswordPlaceholder:`비밀번호 확인`,newPasswordPlaceholder:`새 비밀번호 입력`,confirmNewPasswordPlaceholder:`새 비밀번호 확인`,leaveBlankToKeep:`현재 비밀번호 유지 시 비워두기`,groups:`그룹`,optional:`선택사항`,autoGeneratedPassword:`안전한 비밀번호가 자동으로 생성되어 사용자에게 이메일로 전송됩니다.`,passwordManagedByAdvancedAuth:`비밀번호는 고급 인증에 의해 관리됩니다. "비밀번호 재설정"을 사용하여 이메일로 새 비밀번호를 전송하세요.`,resetPassword:`비밀번호 재설정`,resettingPassword:`비밀번호 재설정 중...`},deleteModal:{title:`사용자 삭제`,message:`이 사용자를 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.`,confirm:`사용자 삭제`}},streamOverlay:{title:`스트림 오버레이`,invalidPrinterId:`유효하지 않은 프린터 ID`,cameraStream:`카메라 스트림`,progress:`진행률`,eta:`예상 완료`,printerIdle:`프린터 대기 중`,printerOffline:`프린터 오프라인`,builder:{title:`스트림 오버레이`,description:`스트림 오버레이 URL을 만듭니다. 전체 화면 카메라 영상 위에 실시간 출력 정보를 겹쳐 보여주며 OBS, 벽걸이 디스플레이 등 모든 브라우저 소스에서 쓸 수 있습니다. 원하는 항목을 고르고 URL을 복사하세요.`,printer:`프린터`,size:`글자 크기`,sizeSmall:`작게`,sizeMedium:`보통`,sizeLarge:`크게`,fps:`프레임 속도`,fpsHint:`A1 및 P1 카메라는 요청한 값과 관계없이 초당 약 5프레임이 한계입니다.`,token:`스트림 오버레이 토큰(선택)`,tokenHint:`로그인을 사용할 때만 필요합니다. OBS에는 자체 세션이 없습니다. 위에서 스트림 오버레이 범위로 발급하세요.`,tokenWarning:`이 URL에는 토큰이 들어 있습니다. URL을 읽을 수 있는 사람은 누구나 영상과 파일 이름을 볼 수 있습니다. 접근을 끊으려면 토큰을 폐기하세요.`,fields:`표시할 항목`,fieldPrinter:`프린터 이름`,fieldFilename:`파일 이름`,fieldStatus:`상태`,fieldProgress:`진행률 막대`,fieldLayers:`레이어 수`,fieldEta:`남은 시간과 완료 예정 시각`,fieldCamera:`카메라 영상`,chamberHint:`챔버 온도는 실제 센서가 있는 모델에서만 표시됩니다. P1과 A1은 의미 없는 값을 보고하므로 제외됩니다.`,urlTitle:`오버레이 URL`,open:`열기`,showPreview:`미리보기 표시`,hidePreview:`미리보기 숨기기`,previewTitle:`오버레이 미리보기`},status:{printing:`인쇄 중`,paused:`일시 중지됨`,finished:`완료됨`,failed:`실패`,idle:`대기 중`,unknown:`알 수 없음`}},profiles:{title:`프로필`,subtitle:`슬라이서 프리셋 및 압력 전진 보정 관리`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`로컬 프로필`,kprofiles:`K-프로필`},orcaCloud:{connectedAs:`연결됨`,connectedShort:`Orca Cloud에 연결됨`,logout:`연결 해제`,noLogoutPermission:`연결을 해제할 권한이 없습니다`,noConnectPermission:`Orca Cloud에 연결할 권한이 없습니다`,retry:`다시 시도`,connectButton:`Orca Cloud 연결`,connect:{title:`Orca Cloud에 연결`,description:`Orca Cloud 계정에 로그인하여 슬라이서 프로필을 Bambuddy에 동기화하세요.`},device:{title:`Orca Cloud에서 Bambuddy 승인`,instruction:`Orca Cloud를 열고 이 코드를 승인하세요. 승인하면 Bambuddy가 자동으로 연결됩니다.`,codeLabel:`페어링 코드`,openButton:`Orca Cloud 승인 페이지 열기`,manualHint:`또는 {{url}}(으)로 이동하여 위 코드를 입력하세요.`,waiting:`승인을 기다리는 중…`,cancel:`취소`},profiles:{title:`Orca Cloud 프로필 ({{count}})`,refresh:`새로고침`,empty:`Orca Cloud 계정에 아직 프로필이 없습니다.`},toast:{disconnected:`Orca Cloud 연결 해제됨`},errors:{startFailed:`Orca Cloud 로그인 흐름을 시작할 수 없습니다.`,denied:`Orca Cloud에서 페어링이 거부되었습니다.`,expired:`페어링 코드가 만료되었습니다. 연결을 클릭하여 다시 시도하세요.`,pollFailed:`승인을 기다리는 중 연결이 끊겼습니다. 다시 시도하세요.`}},localProfiles:{title:`로컬 프로필`,subtitle:`OrcaSlicer에서 슬라이서 프리셋 가져오기 및 관리`,import:`프로필 가져오기`,importDesc:`.bbscfg, .bbsflmt, .orca_filament, .zip 또는 .json 파일을 여기에 드롭하세요`,importing:`가져오는 중...`,search:`로컬 프리셋 검색...`,noPresets:`로컬 프리셋 없음`,badge:`로컬`,edit:`편집`,delete:`삭제`,cancel:`취소`,deleteConfirmTitle:`프리셋 삭제`,deleteConfirm:`이 프리셋을 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.`,source:`출처`,inheritsFrom:`상속`,filamentType:`유형`,vendor:`제조사`,compatiblePrinters:`프린터`,nozzleTemp:`노즐 온도`,cost:`비용`,density:`밀도`,pressureAdvance:`압력 전진`,filament:`필라멘트`,process:`프로세스`,printer:`프린터`,toast:{importSuccess:`{{count}}개 프리셋 가져옴`,importSkipped:`{{count}}개 프리셋 건너뜀 (중복)`,importError:`가져오기 중 {{count}}개 오류 발생`,deleted:`프리셋 삭제됨`,updated:`프리셋 업데이트됨`},noSearchResults:`검색어와 일치하는 프리셋이 없습니다`},connectedAs:`연결된 계정`,signInExpiredTitle:`Bambu 클라우드 로그인이 만료되었습니다`,signInExpiredBody:`Bambu Lab이 저장된 토큰을 더 이상 허용하지 않습니다. 클라우드 프로필, MakerWorld 가져오기, 펌웨어 확인을 복구하려면 다시 로그인하세요.`,logout:`로그아웃`,noLogoutPermission:`로그아웃 권한이 없습니다`,failedToLoad:`프로필 불러오기 실패`,retry:`다시 시도`,time:{justNow:`방금`,minsAgo:`{{count}}분 전`,hoursAgo:`{{count}}시간 전`,daysAgo:`{{count}}일 전`},toast:{loggedOut:`로그아웃되었습니다`},login:{title:`Bambu 클라우드 연결`,subtitle:`기기 간 슬라이서 프리셋 동기화`,email:`이메일`,password:`비밀번호`,region:`지역`,regionGlobal:`글로벌`,regionChina:`중국`,verificationCode:`인증 코드`,totpCode:`인증앱 코드`,checkEmail:`이메일({{email}})로 전송된 6자리 코드를 확인하세요`,enterTotpHint:`인증앱에서 6자리 코드를 입력하세요`,accessToken:`액세스 토큰`,accessTokenHint:`Bambu Studio에서 Bambu Lab 액세스 토큰을 붙여넣으세요`,back:`뒤로`,loginButton:`로그인`,verifyButton:`인증`,setTokenButton:`토큰 설정`,useToken:`액세스 토큰 대신 사용`,captchaTitle:`Bambu Cloud가 CAPTCHA를 요구합니다`,captchaBody:`Bambu가 로그인을 처리하기 전에 네트워크에 CAPTCHA 확인을 요구하고 있으며, 이 확인은 Bambuddy에서 응답할 수 없습니다. 이메일과 비밀번호의 문제가 아닙니다. 차단은 공용 IP 주소에 연결되어 있으며 보통 몇 시간 안에 저절로 풀립니다. 반복해서 재시도하면 오히려 더 오래 지속됩니다. 지금 로그인하려면 브라우저 세션에서 가져온 액세스 토큰을 사용하세요.`,useEmail:`이메일로 로그인`,toast:{loggedIn:`성공적으로 로그인되었습니다`,codeSent:`이메일로 인증 코드가 전송되었습니다`,enterTotp:`인증앱에서 코드를 입력하세요`,tokenSet:`토큰이 성공적으로 설정되었습니다`}},presets:{myPreset:`내 프리셋 (편집 가능)`,duplicate:`복제`,editable:`편집 가능`,failedToLoadDetails:`프리셋 세부 정보 불러오기 실패`,deleteConfirm:`이 프리셋을 삭제하시겠습니까?`,deleteWarning:`Bambu 클라우드에서 "{{name}}"을(를) 영구적으로 삭제합니다. 이 작업은 취소할 수 없습니다.`,noDuplicatePermission:`프리셋 복제 권한이 없습니다`,noEditPermission:`프리셋 편집 권한이 없습니다`,noDeletePermission:`프리셋 삭제 권한이 없습니다`,types:{filament:`필라멘트 프리셋`,printer:`프린터 프리셋`,process:`프로세스 프리셋`},toast:{deleted:`프리셋 삭제됨`,created:`프리셋 생성됨`,updated:`프리셋 업데이트됨`,duplicated:`프리셋 복제됨`,fieldAdded:`"{{key}}" 필드 추가됨`,exported:`프리셋 내보냄`},baseLabel:`기본: {{name}}`,currentLabel:`현재: {{name}}`,newPreset:`새 프리셋`,editPreset:`프리셋 편집`,duplicatePreset:`프리셋 복제`,createNewPreset:`새 프리셋 생성`,customizeSettings:`새 프리셋의 설정 사용자 지정`,compareWithBase:`기본 프리셋과 비교`,compare:`비교`,basePreset:`기본 프리셋`,selectBasePreset:`기본 프리셋 선택...`,presetName:`프리셋 이름`,myCustomPreset:`내 사용자 지정 프리셋`,inheritsFrom:`상속 출처`,dropJsonToImport:`JSON 파일을 드롭하여 가져오기`,tabs:{common:`공통`,allFields:`모든 필드`},availableFields:`사용 가능한 필드`,searchFieldsPlaceholder:`필드 검색...`,noMatchingFields:`일치하는 필드 없음`,allFieldsAdded:`모든 필드 추가됨`,addCustomField:`사용자 지정 필드 추가`,yourOverrides:`내 재정의`,noOverridesYet:`아직 재정의 없음`,clickFieldsToAdd:`왼쪽 필드를 클릭하여 추가`,saveAsTemplate:`템플릿으로 저장`,jsonTip:`팁: 이 모달 어디서나 .json 파일을 드래그 앤 드롭하여 설정을 가져올 수 있습니다`},cloudView:{searchPlaceholder:`프리셋 검색...`,templates:`템플릿`,refresh:`새로고침`,newPreset:`새 프리셋`,clearFilters:`필터 초기화`,compareMode:`비교 모드`,selectAnotherPreset:`다른 {{type}} 프리셋 선택`,clickTwoPresets:`같은 유형의 프리셋 두 개를 클릭하여 비교`,selectFirst:`1. 첫 번째 선택`,selectSecond:`2. 두 번째 선택`,compareNow:`지금 비교`,lastSynced:`마지막 동기화:`,showingCount:`{{total}}개 중 {{showing}}개 표시`,noPresetsFound:`프리셋을 찾을 수 없음`,columns:{filament:`필라멘트`,process:`프로세스`,printer:`프린터`},noFilamentPresets:`필라멘트 프리셋 없음`,noProcessPresets:`프로세스 프리셋 없음`,noPrinterPresets:`프린터 프리셋 없음`,filters:{type:`유형`,owner:`소유자`,printer:`프린터`,nozzle:`노즐`,filament:`필라멘트`,layer:`레이어`,all:`전체`,myPresets:`내 프리셋`,builtIn:`기본 제공`,process:`프로세스`},noTemplatesPermission:`템플릿 관리 권한이 없습니다`,noRefreshPermission:`프로필 새로고침 권한이 없습니다`,noCreatePermission:`프리셋 생성 권한이 없습니다`},templates:{title:`빠른 템플릿`,noTemplates:`아직 템플릿 없음`,createFirst:`프리셋 편집기에서 템플릿을 생성하세요`,typeFilter:`유형:`,deleteTitle:`템플릿 삭제`,deleteWarning:`이 작업은 취소할 수 없습니다`,deleteConfirm:`"{{name}}"을(를) 삭제하시겠습니까?`,namePlaceholder:`템플릿 이름`,descriptionPlaceholder:`설명`,settingsJson:`설정 (JSON)`,fieldsCount:`{{count}}개 필드`,shownInModals:`모달에 표시됨`,hiddenInModals:`모달에서 숨겨짐`,apply:`적용`,toast:{deleted:`템플릿 삭제됨`,updated:`템플릿 업데이트됨`,created:`템플릿 생성됨`,applied:`템플릿 적용됨`}}},support:{debugLoggingActive:`디버그 로깅이 활성화되어 있습니다`,manageLogs:`관리`,collectItem7:`프린터 연결 및 펌웨어 버전`,collectItem8:`통합 상태 (Spoolman, MQTT, HA)`,collectItem9:`네트워크 인터페이스 (서브넷만)`,collectItem10:`Python 패키지 버전`,collectItem11:`데이터베이스 상태 확인`,collectItem12:`Docker 환경 세부 정보`,bundleGenerating:`번들 생성 중...`,bundleStepConnection:`프린터 연결 확인 실행 중`,bundleStepVirtualPrinters:`가상 프린터 설정 확인 실행 중`,bundleStepLogScan:`알려진 문제가 있는지 최근 로그 스캔 중`,bundleStepBuild:`지원 번들 ZIP 빌드 중`},fileManager:{variants:{badge:`버전 {{count}}개`,groupAction:`버전으로 그룹화`,groupTooltip:`이 파일들을 서로 다른 프린터용으로 슬라이스한 동일 작업으로 표시합니다`,grouped:`파일 {{count}}개를 버전으로 그룹화했습니다`,printAlternatives:`인쇄 (대안 {{count}}개)`},title:`파일 관리자`,subtitle:`인쇄 파일 정리 및 관리`,uploadFiles:`파일 업로드`,newFolder:`새 폴더`,folderName:`폴더 이름`,folderNamePlaceholder:`예: 기능성 부품`,renameFile:`파일 이름 바꾸기`,renameFolder:`폴더 이름 바꾸기`,invalidFilenameChar:`"{{char}}" 문자는 인쇄 파일 이름에 허용되지 않습니다. 프린터 SD 카드가 거부하는 문자: < > : " / \\ | ? *`,moveFiles:`{{count}}개 파일 이동`,rootNoFolder:`루트 (폴더 없음)`,current:`현재`,linkFolder:`폴더 연결`,linkFolderDescription:`"{{name}}"을(를) 프로젝트 또는 아카이브에 연결하여 빠른 접근.`,project:`프로젝트`,archive:`아카이브`,noProjectsFound:`프로젝트를 찾을 수 없음`,noArchivesFound:`아카이브를 찾을 수 없음`,unlink:`연결 해제`,link:`연결`,dragDropFiles:`파일을 여기에 드래그 앤 드롭`,dropFilesHere:`파일을 여기에 드롭`,releaseToUpload:`놓아서 업로드`,orClickToBrowse:`또는 클릭하여 탐색`,allFileTypesSupported:`모든 파일 형식 지원. ZIP 파일은 압축 해제됩니다.`,zipFilesDetected:`ZIP 파일 감지됨`,zipExtractOptions:`ZIP 파일이 압축 해제됩니다. 폴더 구조 처리 방법을 선택하세요:`,preserveZipStructure:`ZIP에서 폴더 구조 유지`,createFolderFromZip:`ZIP 파일 이름으로 폴더 생성`,stlThumbnailGeneration:`STL 썸네일 생성`,zipMayContainStl:`ZIP 파일에 STL 파일이 포함될 수 있습니다. 압축 해제 중 썸네일을 생성할 수 있습니다.`,thumbnailsCanBeGenerated:`STL 파일의 썸네일을 생성할 수 있습니다. 대형 모델은 처리 시간이 더 걸릴 수 있습니다.`,generateThumbnailsForStl:`STL 파일의 썸네일 생성`,threemfDetected:`3MF 파일 감지됨`,threemfExtractionInfo:`프린터 모델, 재료, 색상 및 인쇄 설정이 3MF 파일에서 자동으로 추출됩니다.`,willBeExtracted:`추출 예정`,filesExtracted:`{{count}}개 파일 추출됨`,uploadComplete:`업로드 완료: {{succeeded}}개 성공`,uploadFailed:`업로드 실패`,zipFilesFailed:`{{count}}개 파일 실패`,uploading:`업로드 중...`,changeLink:`링크 변경...`,linkTo:`연결 대상...`,linkToProjectOrArchive:`프로젝트 또는 아카이브에 연결`,generateThumbnail:`썸네일 생성`,generateThumbnails:`썸네일 생성`,generateThumbnailsForMissing:`썸네일이 없는 STL 파일의 썸네일 생성`,gridView:`격자 보기`,listView:`목록 보기`,lowDiskSpaceWarning:`디스크 공간 부족 경고`,lowDiskSpaceDetails:`전체 {{total}} 중 {{free}}만 남음. 임계값은 설정에서 {{threshold}}GB로 설정됩니다.`,files:`파일`,folders:`폴더`,size:`크기`,free:`여유`,allFiles:`모든 파일`,allExternal:`외부`,externalIsEmpty:`외부 파일 없음`,externalEmptyDescription:`연결된 외부 폴더의 파일이 여기에 표시됩니다.`,wrap:`줄 바꿈`,enableTextWrapping:`텍스트 줄 바꿈 활성화`,disableTextWrapping:`텍스트 줄 바꿈 비활성화`,collapse:`접기`,collapseFoldersByDefault:`기본적으로 폴더 접기`,expandFoldersByDefault:`기본적으로 폴더 펼치기`,folderSort:`폴더 정렬`,folderSortByName:`이름순`,folderSortByActivity:`최근 활동순`,dragToResizeTooltip:`드래그하여 크기 조정, 더블클릭하여 초기화`,searchFiles:`파일 검색...`,searchSubfoldersHint:`하위 폴더 포함`,readme:{truncated:`잘림`,show:`README 표시`,hide:`README 숨기기`,label:`README`},tags:{title:`태그`,subtitle:`파일에 가로지르는 필터용 라벨을 붙이세요 — 장난감, 어린이용, PETG 전용 등.`,manage:`태그`,manageTitle:`태그 카탈로그 관리`,add:`새 태그`,edit:`태그 이름 변경`,name:`이름`,fileCount:`파일`,empty:`아직 태그가 없습니다. 만들어서 파일에 라벨을 붙이세요.`,noMatches:`일치하는 태그가 없습니다.`,createPlaceholder:`예: 장난감, 어린이용, petg`,createButton:`만들기`,nameRequired:`이름은 필수입니다.`,searchPlaceholder:`태그 필터...`,created:`태그가 만들어졌습니다.`,updated:`태그 이름이 변경되었습니다.`,deleted:`태그가 제거되었습니다.`,saveFailed:`태그를 저장할 수 없습니다.`,deleteFailed:`태그를 제거할 수 없습니다.`,applyFailed:`태그를 적용할 수 없습니다.`,applyAdd:`태그 추가`,applyRemove:`태그 제거`,applyAddSuccess:`{{files}}개 파일에 태그 {{count}}개를 추가했습니다.`,applyRemoveSuccess:`{{files}}개 파일에서 태그 {{count}}개를 제거했습니다.`,actionAdd:`선택한 파일에 추가`,actionRemove:`선택한 파일에서 제거`,tagAction:`태그`,bulkTitle:`선택한 {{count}}개 파일에 태그 지정`,bulkTooltip:`선택한 모든 파일에 태그를 추가하거나 제거합니다.`,noPermission:`파일에 태그를 붙일 권한이 없습니다.`,filterLabel:`필터:`,clearAll:`모두 지우기`,confirmDelete:`태그 "{{name}}"을(를) 삭제하시겠습니까?`,confirmDeleteMessage:`카탈로그에서 태그를 제거합니다. 파일과 다른 태그는 그대로 유지됩니다.`,confirmDeleteInUseMessage:`이 태그는 {{count}}개 파일에 있습니다. 삭제하면 모든 파일에서 칩이 사라지지만 파일 자체는 변경되지 않습니다.`,editAria:`{{name}} 편집`,deleteAria:`{{name}} 삭제`},allTypes:`모든 유형`,prints:`인쇄물`,ascending:`오름차순`,descending:`내림차순`,showModified:`수정 날짜 표시`,hideModified:`수정 날짜 숨기기`,lastModified:`마지막 수정`,lastActivity:`마지막 활동`,resultsCount:`전체 {{total}}개 중 {{showing}}개`,selectAll:`모두 선택`,deselectAll:`모두 선택 해제`,selected:`{{count}}개 선택됨`,adding:`추가 중...`,loadingFiles:`파일 불러오는 중...`,folderIsEmpty:`폴더가 비어 있음`,noFilesYet:`파일 없음`,folderEmptyDescription:`파일을 업로드하거나 이 폴더로 이동하여 시작하세요.`,noFilesDescription:`파일을 업로드하여 인쇄 관련 파일을 정리하세요.`,noMatchingFiles:`일치하는 파일 없음`,noMatchingFilesDescription:`현재 검색 또는 필터 조건과 일치하는 파일이 없습니다.`,clearFilters:`필터 초기화`,printedCount:`{{count}}회 인쇄됨`,uploadedBy:`업로드한 사람`,deleteFolder:`폴더 삭제`,deleteFile:`파일 삭제`,deleteFilesCount:`{{count}}개 파일 삭제`,deleteFolderConfirm:`이 폴더를 삭제하시겠습니까? 안의 모든 파일도 삭제됩니다.`,deleteFileConfirm:`이 파일을 삭제하시겠습니까?`,deleteFilesConfirm:`선택한 {{count}}개 파일을 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.`,deleting:`삭제 중...`,noPermissionRenameFolder:`폴더 이름 변경 권한이 없습니다`,noPermissionLinkFolder:`폴더 연결 권한이 없습니다`,noPermissionDeleteFolder:`폴더 삭제 권한이 없습니다`,onlyEmptyFoldersDeletable:`빈 폴더만 삭제할 수 있습니다`,noPermissionPrint:`인쇄 권한이 없습니다`,noPermissionAddToQueue:`대기열 추가 권한이 없습니다`,noPermissionSlice:`파일 슬라이싱 권한이 없습니다`,noPermissionDownload:`파일 다운로드 권한이 없습니다`,noPermissionPreview:`파일을 미리 볼 권한이 없습니다`,preview3d:`3D 미리보기`,noPermissionRenameFile:`파일 이름 변경 권한이 없습니다`,noPermissionGenerateThumbnail:`썸네일 생성 권한이 없습니다`,noPermissionDeleteFile:`파일 삭제 권한이 없습니다`,noPermissionCreateFolder:`폴더 생성 권한이 없습니다`,noPermissionUpload:`파일 업로드 권한이 없습니다`,noPermissionMoveFiles:`파일 이동 권한이 없습니다`,noPermissionDeleteFiles:`파일 삭제 권한이 없습니다`,linkExternal:`외부 연결`,linkExternalFolder:`외부 폴더 연결`,linkExternalFolderDescription:`호스트 디렉토리(NAS, USB, 네트워크 공유)를 파일 관리자에 마운트합니다. 파일은 복사되지 않고 원래 경로에서 직접 접근합니다.`,externalFolderNamePlaceholder:`예: NAS 인쇄물`,externalPath:`호스트 경로`,externalPathHelp:`Docker 호스트의 디렉토리 절대 경로. 컨테이너에 바인드 마운트되어야 합니다.`,readOnly:`읽기 전용`,readOnlyHelp:`업로드 및 삭제 방지`,showHiddenFiles:`숨김 파일 표시 (dotfiles)`,externalFolder:`외부 폴더`,scanFolder:`스캔`,toast:{folderCreated:`폴더 생성됨`,openInSlicerFailed:`슬라이서에서 열 수 없습니다`,folderDeleted:`폴더 삭제됨`,fileDeleted:`파일 삭제됨`,filesDeleted:`{{count}}개 파일 삭제됨`,filesMoved:`파일 이동됨`,folderLinked:`폴더 연결됨`,folderUnlinked:`폴더 연결 해제됨`,externalFolderLinked:`외부 폴더 연결 및 스캔됨`,folderScanned:`스캔 완료: {{added}}개 추가, {{removed}}개 제거`,addedToQueue:`{{count}}개 파일을 대기열에 추가함`,addedToQueuePartial:`{{added}}개 추가됨, {{failed}}개 실패`,failedToAddToQueue:`파일 추가 실패: {{error}}`,fileRenamed:`파일 이름 변경됨`,folderRenamed:`폴더 이름 변경됨`,thumbnailsGenerated:`{{count}}개 썸네일 생성됨`,thumbnailsGeneratedPartial:`{{succeeded}}개 썸네일 생성됨, {{failed}}개 실패`,noStlMissingThumbnails:`썸네일이 없는 STL 파일 없음`,failedToGenerateThumbnails:`썸네일 생성 실패: {{error}}`,thumbnailGenerated:`썸네일 생성됨`,failedToGenerateThumbnail:`썸네일 생성 실패: {{error}}`}},projects:{parentLabel:`상위 프로젝트`,parentNone:`없음 (최상위 프로젝트)`,parentHint:`이 프로젝트를 다른 프로젝트 아래에 두면 수치가 마스터 프로젝트로 합산됩니다`,partOf:`{{name}}의 일부`,subProjectCount:`하위 프로젝트 {{count}}개`,subProjectsOf:`{{name}}의 하위 프로젝트`,collapseSubProjects:`하위 프로젝트 접기`,expandSubProjects:`하위 프로젝트 펼치기`,title:`프로젝트`,subtitle:`3D 인쇄 프로젝트 정리 및 추적`,newProject:`새 프로젝트`,editProject:`프로젝트 편집`,deleteProject:`프로젝트 삭제`,projectName:`프로젝트 이름`,description:`설명`,noProjects:`프로젝트 없음`,noProjectsFiltered:`{{status}} 프로젝트 없음`,noProjectsFilteredHelp:`{{status}} 프로젝트가 없습니다. 상태가 변경되면 여기에 표시됩니다.`,createFirst:`첫 번째 프로젝트를 만들어 관련 인쇄물을 정리하고 진행 상황을 추적하며 빌드를 관리하세요.`,createFirstButton:`첫 번째 프로젝트 만들기`,create:`만들기`,files:`파일`,prints:`인쇄물`,plates:`플레이트`,parts:`부품`,lastModified:`마지막 수정`,deleteConfirm:`이 프로젝트를 삭제하시겠습니까? 아카이브 및 대기열 항목은 연결 해제되지만 삭제되지는 않습니다.`,addFiles:`파일 추가`,removeFile:`파일 제거`,viewDetails:`세부 정보 보기`,namePlaceholder:`예: Voron 2.4 빌드`,descriptionPlaceholder:`선택적 설명...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URL은 http:// 또는 https://로 시작해야 합니다`,openExternalUrl:`프로젝트 URL 열기`,coverImageLabel:`커버 사진`,coverImageAlt:`프로젝트 커버 사진`,coverImageUpload:`업로드`,coverImageReplace:`교체`,coverImageRemove:`제거`,color:`색상`,targetPlates:`목표 플레이트`,targetPlatesPlaceholder:`예: 25`,targetPlatesHelp:`인쇄 작업 수`,targetParts:`목표 부품`,targetPartsPlaceholder:`예: 150`,targetPartsHelp:`필요한 총 개체 수`,targetSets:`파일당 복사본 수`,targetSetsPlaceholder:`예: 10`,targetSetsHelp:`각 인쇄 가능한 파일을 인쇄할 횟수`,tagsLabel:`태그 (쉼표로 구분)`,tagsPlaceholder:`예: voron, 기능성, 선물`,dueDate:`마감일`,priority:`우선순위`,priorityLow:`낮음`,priorityNormal:`보통`,priorityHigh:`높음`,priorityUrgent:`긴급`,statusActive:`활성`,statusCompleted:`완료됨`,statusArchived:`보관됨`,done:`완료`,completed:`완료됨`,failed:`실패`,inQueue:`대기 중`,noPrintsYet:`인쇄물 없음`,printJobs:`인쇄 작업 (플레이트)`,partsPrinted:`인쇄된 부품`,failedParts:`실패한 부품`,import:`가져오기`,export:`내보내기`,importProject:`프로젝트 가져오기`,exportAll:`모든 프로젝트 내보내기`,loading:`프로젝트 불러오는 중...`,noEditPermission:`프로젝트 편집 권한이 없습니다`,noDeletePermission:`프로젝트 삭제 권한이 없습니다`,noCreatePermission:`프로젝트 생성 권한이 없습니다`,noImportPermission:`프로젝트 가져오기 권한이 없습니다`,noExportPermission:`프로젝트 내보내기 권한이 없습니다`,toast:{created:`프로젝트 생성됨`,updated:`프로젝트 업데이트됨`,deleted:`프로젝트 삭제됨`,imported:`프로젝트 가져옴`,multipleImported:`{{count}}개 프로젝트 가져옴`,importFailed:`가져오기 실패`,exported:`프로젝트 내보냄 (메타데이터만)`}},projectDetail:{notFound:`프로젝트를 찾을 수 없음`,backToProjects:`프로젝트로 돌아가기`,export:`내보내기`,exportProject:`프로젝트 내보내기`,noExportPermission:`프로젝트 내보내기 권한이 없습니다`,noEditPermission:`프로젝트 편집 권한이 없습니다`,partOf:`속한 프로젝트:`,priorityLabel:`우선순위:`,noPrints:`이 프로젝트에 아직 인쇄물이 없습니다`,status:{active:`활성`,completed:`완료됨`,archived:`보관됨`},priority:{low:`낮음`,normal:`보통`,high:`높음`,urgent:`긴급`},dueDate:{overdue:`기한 초과`,today:`오늘 마감`,daysLeft:`{{count}}일 남음`},progress:{platesProgress:`플레이트 진행률`,partsProgress:`부품 진행률`,setsProgress:`완성된 세트`,sets:`세트`,setsHint:`모든 인쇄 가능한 파일이 이 횟수에 도달하면 세트가 완성됩니다`,printJobs:`인쇄 작업`,parts:`부품`,percentComplete:`{{percent}}% 완료`,remaining:`{{count}}개 남음`},stats:{printJobs:`인쇄 작업`,total:`합계`,failed:`{{count}}개 실패`,partsPrinted:`{{count}}개 부품 인쇄됨`,printTime:`인쇄 시간`,filamentUsed:`사용된 필라멘트`},cost:{title:`비용 추적`,filamentCost:`필라멘트 비용`,energy:`에너지`,totalCost:`총 비용`,total:`합계`,includesBom:`BOM 포함`,budget:`예산`,remaining:`남은 예산`},subProjects:{title:`하위 프로젝트 ({{count}})`,jobs:`작업 {{count}}개`},rollup:{title:`하위 프로젝트 {{count}}개 포함`,progress:`전체 진행률`,percentComplete:`{{percent}}% 완료`},notes:{title:`메모`,noEditPermission:`메모 편집 권한이 없습니다`,placeholder:`이 프로젝트에 대한 메모 추가...`,empty:`아직 메모가 없습니다. 편집을 클릭하여 메모를 추가하세요.`},files:{title:`파일`,linkFolders:`파일 관리자에서 폴더 연결`,forQuickAccess:`빠른 접근을 위해 이 프로젝트에 연결합니다.`,fileCount:`{{count}}개 파일`,empty:`연결된 폴더가 없습니다. 파일 관리자로 이동하여 폴더를 이 프로젝트에 연결하세요.`,printedCount:`{{count}}회 인쇄됨`,progressTooltip:`{{target}}회 중 {{done}}회 인쇄 완료`,noFiles:`이 폴더에 파일이 없습니다.`},bom:{title:`부품 목록`,acquired:`{{total}}개 중 {{completed}}개 확보`,showAll:`전체 표시`,hideDone:`완료된 것 숨기기`,addPart:`부품 추가`,noAddPermission:`부품 추가 권한이 없습니다`,partNamePlaceholder:`부품 이름 (예: M3x8 나사)`,partName:`부품 이름`,qty:`수량`,price:`가격 ({{currency}})`,sourcingUrlPlaceholder:`구매 URL (선택사항)`,remarksPlaceholder:`비고 (선택사항)`,deletePart:`부품 삭제`,deleteConfirm:`"{{name}}"을(를) 삭제하시겠습니까?`,noUpdatePermission:`부품 업데이트 권한이 없습니다`,noEditPermission:`부품 편집 권한이 없습니다`,noDeletePermission:`부품 삭제 권한이 없습니다`,totalCost:`총 비용:`,empty:`부품 목록에 부품이 없습니다. 하드웨어, 전자 부품 또는 기타 구성품을 추가하여 조달이 필요한 것을 추적하세요.`},timeline:{title:`활동 타임라인`,empty:`아직 활동이 없습니다.`},template:{saveAsTemplate:`템플릿으로 저장`,noCreatePermission:`템플릿 생성 권한이 없습니다`},queue:{title:`대기열`,viewAll:`전체 보기`,printing:`{{count}}개 인쇄 중`,queued:`{{count}}개 대기 중`},prints:{title:`인쇄물 ({{count}})`},toast:{projectUpdated:`프로젝트 업데이트됨`,partAdded:`부품 추가됨`,partRemoved:`부품 제거됨`,exportFailed:`내보내기 실패`,projectExported:`프로젝트 내보냄`,templateCreated:`템플릿 생성됨`}},system:{title:`시스템 정보`,version:`버전`,uptime:`가동 시간`,cpuUsage:`CPU 사용량`,memoryUsage:`메모리 사용량`,diskUsage:`디스크 사용량`,networkInfo:`네트워크 정보`,logs:`로그`,debugMode:`디버그 모드`,enableDebug:`디버그 로깅 활성화`,disableDebug:`디버그 로깅 비활성화`,downloadLogs:`로그 다운로드`,clearLogs:`로그 초기화`,dockerInfo:`Docker 정보`,containerName:`컨테이너 이름`,imageName:`이미지 이름`,platform:`플랫폼`,architecture:`아키텍처`},sponsors:{sectionTitle:`독립적·커뮤니티 후원`,tagline:`Bambuddy는 무료이며, 자발적으로 후원하는 사용자 덕분에 계속 무료로 유지됩니다. VC도 없고, 클라우드 종속도 없습니다.`,viewSupporters:`후원자 보기`,toastPrints:`Bambuddy로 {{count}}회 인쇄를 완료했습니다. Bambuddy는 후원자 덕분에 무료로 유지됩니다.`,toastCost:`Bambuddy로 {{total}}만큼의 필라멘트를 추적했습니다. 프로젝트를 독립적으로 유지하는 사람들을 만나보세요.`,toastArchives:`Bambuddy로 {{count}}회 인쇄를 아카이브했습니다. 독립성을 지지하는 사람들을 만나보세요.`,toastAnniversary:`Bambuddy와 함께한 지 1년입니다! 프로젝트를 독립적으로 유지하는 사람들을 만나보세요.`,toastVersionUpdate:`v{{version}}로 업데이트되었습니다. Bambuddy는 후원자 덕분에 무료로 유지됩니다.`,toastBusiness:`프린터 {{count}}대에서 Bambuddy를 운영 중이신가요? 팀을 위한 지원 플랜이 있습니다. 우선 수정, 인보이스 발행, 메인테이너와의 직접 소통을 제공합니다.`,businessCta:`비즈니스용 Bambuddy`,businessTitle:`비즈니스용 Bambuddy`,businessTagline:`프린터 {{count}}대를 운영 중입니다. 팀과 프린트 팜을 위한 우선 지원, 상용 라이선스, 인보이스 발행을 제공합니다.`},library:{title:`필라멘트 라이브러리`,addFilament:`필라멘트 추가`,editFilament:`필라멘트 편집`,deleteFilament:`필라멘트 삭제`,vendor:`제조사`,material:`재료`,color:`색상`,kFactor:`K 계수`,temperature:`온도`,noFilaments:`라이브러리에 필라멘트 없음`,deleteConfirm:`이 필라멘트를 삭제하시겠습니까?`,importFromPrinter:`프린터에서 가져오기`,exportToFile:`파일로 내보내기`,runWithPipeline:{actionLabel:`파이프라인으로 실행`,noPermission:`파이프라인을 실행할 권한이 없습니다`,modalTitle:`파이프라인으로 실행`,confirmTitle:`실행 확인`,confirmIntro:`사전 점검에서 이 실행과 관련된 문제를 발견했습니다`,sourceHint:`소스`,pipelineHint:`파이프라인`,targetHint:`대상`,pipelineListAria:`사용 가능한 파이프라인`,runAnyway:`그래도 실행`,loading:`불러오는 중…`,empty:`저장된 파이프라인이 없습니다. 슬라이스 대화상자를 열고 "파이프라인으로 저장"을 클릭하여 생성하세요.`,noTarget:`대상 프린터가 설정되지 않음`,noTargetMessage:`이 파이프라인에는 대상 프린터가 없습니다. 설정에서 열어 선택하세요.`,copies:`사본 수`,copiesHint:`최대 {{n}}`,classTarget:`임의의 {{model}}`,toast:{started:`파이프라인 실행 시작됨`,failed:`실행을 시작할 수 없습니다`},issue:{printerNotSet:`이 파이프라인에 대상 프린터가 설정되어 있지 않습니다.`,printerNotFound:`대상 프린터가 더 이상 존재하지 않습니다.`,printerDisabled:`대상 프린터가 비활성화되어 있습니다.`,printerOffline:`대상 프린터가 오프라인입니다.`,filamentType:`필라멘트 슬롯 {{slot}}: 예상 {{expected}}, AMS 실제 {{actual}}`,filamentColor:`필라멘트 슬롯 {{slot}}: 색상이 다릅니다 (예상 {{expected}}, AMS {{actual}})`,amsSlotMissing:`AMS 슬롯 {{slot}}이(가) 이 프린터에서 사용 불가`,filamentUnverified:`필라멘트 슬롯 {{slot}}은(는) 클라우드/표준 프리셋이며 정적으로 검증할 수 없습니다.`,noClassMatches:`이 설치에서 파이프라인의 대상 모델 클래스({{expected}})와 일치하는 프린터가 없습니다.`,classNotSet:`파이프라인 대상이 프린터 클래스로 설정되었지만 모델이 선택되지 않았습니다.`}}},slicerSettings:{presetValuesOutdatedSidecar:`슬라이서 기본값을 표시합니다. 슬라이서 사이드카가 이 기능보다 오래되어 프리셋 값을 가져올 수 없습니다. 값을 보려면 사이드카 이미지를 업데이트하세요. 변경하지 않은 항목은 계속 프리셋 값을 사용합니다.`,presetValuesNotConfigured:`슬라이서 기본값을 표시합니다. 슬라이서 사이드카가 설정되지 않아 프리셋 값을 읽을 수 없습니다. 변경하지 않은 항목은 계속 프리셋 값을 사용합니다.`,presetValuesSidecarUnavailable:`슬라이서 기본값을 표시합니다. 슬라이서 사이드카가 응답하지 않아 프리셋 값을 읽을 수 없습니다. 변경하지 않은 항목은 계속 프리셋 값을 사용합니다.`,presetValuesUnavailable:`슬라이서 기본값을 표시합니다. 선택한 프리셋의 값을 읽을 수 없었습니다. 변경하지 않은 항목은 계속 프리셋 값을 사용합니다.`,filamentDefault:`기본값`,fromFile:`파일에서`,fromFileHint:`디자이너가 원본 파일에서 이 항목을 변경했습니다. 값은 {{value}}입니다.`,fromFilePrinterCoupled:`디자이너의 프린터`,fromFilePrinterCoupledHint:`이 파일이 설계된 프린터에 맞춘 값입니다. 사용 중인 프린터에서는 잘못되거나 범위를 벗어날 수 있습니다.`,fromFileOverridesPreset:`프리셋 덮어쓰기`,fromFileOverridesPresetHint:`파일은 이 값을 {{value}}(으)로 설정하지만 선택한 프리셋은 {{preset}}을(를) 사용합니다. 파일을 우선할 때만 선택하세요.`,useFromFile:`{{option}}에 원본 파일의 값 사용`,otherFromFile:`이 파일의 기타 설정`,fromFileSummary:`이 파일에서 디자이너가 프로세스 설정 {{count}}개를 변경했습니다. 체크한 항목만 적용됩니다.`,fromFileUseAll:`디자이너 설정 사용`,fromFileUseAllHint:`다른 프린터에서도 통하는 설정에 체크합니다. 디자이너의 프린터에 맞춘 설정과 선택한 프리셋을 정의하는 설정은 꺼진 채로 둡니다.`,fromFileClear:`{{count}}개 해제`,loading:`슬라이서 설정을 불러오는 중…`,mode:{simple:`간단`,advanced:`고급`,expert:`전문가`},searchPlaceholder:`설정 검색`,resetAll:`{{count}}개 초기화`,resetOption:`기본값으로 되돌리기`,noMatches:`검색과 일치하는 설정이 없습니다.`},slice:{filamentSlotUnset:`미설정`,processSettingsEmbedded:`'파일에 포함된 설정 사용'이 켜져 있는 동안에는 사용되지 않습니다. 이 슬라이스는 파일 자체의 설정을 따릅니다.`,processSettingsInactive:`비활성`,presetsHidden:`{{count}}개 숨김`,showAllPresets:`모두 표시`,showFewerPresets:`간략히 표시`,processSettings:`프로세스 설정`,processSettingsHint:`이 슬라이스에 사용할 프리셋을 조정합니다. 건드리지 않은 항목은 프리셋 정의를 그대로 따릅니다.`,processSettingsChanged:`{{count}}개 변경됨`,processSettingsUnchanged:`프리셋 기본값`,title:`모델 슬라이싱`,action:`슬라이싱`,slicing:`슬라이싱 중…`,printer:`프린터 프로필`,process:`프로세스 프로필`,filament:`필라멘트 프로필`,filamentSlot:`필라멘트 {{index}} ({{type}})`,filamentColour:`필라멘트 색상`,selectPreset:`— 프리셋 선택 —`,loadingPresets:`프리셋 불러오는 중…`,analyzingPlateFilaments:`플레이트 필라멘트 분석 중…`,analyzingPlateFilamentsHint:`이 플레이트가 사용하는 AMS 슬롯을 확인하기 위해 미리보기 슬라이싱을 실행합니다. 캐시 후에는 재오픈이 즉각적입니다.`,previewToast:`{{name}} 분석 중 — {{elapsed}}`,previewWithProgress:`{{name}} 분석 중 — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— 이 플레이트에서 사용되지 않음`,noPresetsForSlot:`사용 가능한 프리셋 없음`,presetsLoadFailed:`프리셋 불러오기 실패. 먼저 설정 → 프로필에서 가져오세요.`,refreshPresets:`새로 고침`,refreshPresetsTitle:`프리셋 새로 고침 — 최신 클라우드 및 번들 목록 가져오기 (Bambu Studio 또는 Bambu Handy에서 프리셋 삭제 후 사용)`,allPresetsRequired:`모든 프리셋을 선택해야 합니다`,useEmbedded:`파일에 포함된 설정 사용`,useEmbeddedHint:`위 프로필 대신 디자이너가 설정한 대로(벽, 내부 채움, 필라멘트) 슬라이싱합니다. 프린터가 파일과 일치하여 사용할 수 있습니다.`,autoOrient:`개체 방향 자동 조정`,autoOrientHint:`슬라이싱하기 전에 각 개체를 출력하기 좋은 면으로 회전시킵니다. 파일에 저장된 방향을 덮어씁니다.`,autoArrange:`플레이트에 자동 배치`,autoArrangeHint:`개체가 겹치지 않도록 슬라이서가 다시 배치합니다. 파일의 배치를 대체합니다.`,enqueuing:`슬라이싱 작업 제출 중…`,queued:`대기 중…`,failed:`슬라이싱 실패. 슬라이서 사이드카 로그를 확인하세요.`,startedToast:`백그라운드에서 {{name}} 슬라이싱 중…`,queuedToast:`대기 중: {{name}} — {{elapsed}}`,runningToast:`{{name}} 슬라이싱 중 — {{elapsed}}`,runningWithProgress:`{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,completedToast:`{{name}} 슬라이싱 완료`,externalWriteFallbackToast:`내부 라이브러리에 저장했습니다: 외부 폴더에 쓸 수 없습니다`,failedToast:`{{name}} 슬라이싱 실패: {{detail}}`,tier:{local:`가져온 것`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`표준`},cloud:{notAuthenticated:`클라우드 프리셋을 보려면 Bambu Cloud에 로그인하세요 (설정 → 프로필 → Bambu Cloud).`,expired:`Bambu Cloud 세션이 만료되었습니다 — 다시 로그인하여 클라우드 프리셋을 새로고침하세요.`,unreachable:`현재 Bambu Cloud에 연결할 수 없습니다. 로컬 및 표준 프리셋은 계속 작동합니다.`},orcaCloud:{notAuthenticated:`Orca 프리셋을 보려면 Orca Cloud (프로필 → Orca Cloud)에 로그인하세요.`,expired:`Orca Cloud 세션이 만료되었습니다 — Orca 프리셋을 새로고침하려면 다시 로그인하세요.`,unreachable:`Orca Cloud에 현재 연결할 수 없습니다. 다른 프리셋은 계속 작동합니다.`},actionAll:`{{count}}개 플레이트 모두 슬라이싱`,actionAllTitle:`모든 플레이트를 단일 다중 플레이트 출력으로 슬라이싱합니다 (단일 아카이브). 필라멘트 선택은 프로젝트가 정의하는 모든 슬롯을 포함합니다.`,allPlatesToggle:`{{count}}개 플레이트 모두 슬라이싱`,otherPrinters:`다른 프린터`,runningWithProgressMultiPlate:`플레이트 {{plateIndex}}/{{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,failedTitle:`슬라이싱 실패`,bedType:{label:`빌드 플레이트`,auto:`자동 (프로세스 프리셋 사용)`,coolPlate:`쿨 플레이트`,coolPlateSuperTack:`쿨 플레이트 슈퍼택`,engineering:`엔지니어링 플레이트`,highTemp:`고온 플레이트`,texturedPEI:`텍스처 PEI 플레이트`,smoothPEI:`매끄러운 PEI 플레이트`},pipelines:{label:`파이프라인`,applyAria:`파이프라인 적용`,applyPrompt:`파이프라인 적용…`,empty:`저장된 파이프라인이 없습니다`,saveButton:`파이프라인으로 저장`,saveTitle:`현재 네 개 슬롯의 선택을 재사용 가능한 파이프라인으로 저장합니다`,namePlaceholder:`파이프라인 이름`,nameAria:`새 파이프라인 이름`,toast:{applied:`"{{name}}" 적용됨`,saved:`파이프라인이 저장되었습니다`,saveFailed:`저장 실패`}}},spoolman:{title:`Spoolman 통합`,enabled:`Spoolman 활성화됨`,url:`Spoolman URL`,connected:`연결됨`,disconnected:`연결되지 않음`,testConnection:`연결 테스트`,sync:`동기화`,syncing:`동기화 중...`,lastSync:`마지막 동기화`,linkToSpoolman:`Spoolman에 연결`,openInSpoolman:`Spoolman에서 열기`,unlinkSpool:`스풀 연결 해제`,unlinkConfirmTitle:`스풀 할당 해제?`,unlinkConfirmMessage:`이 슬롯에서 스풀을 제거합니다. 스풀 데이터 자체는 변경되지 않습니다.`,selectSpool:`스풀 선택`,noUnlinkedSpools:`할당되지 않은 스풀 없음`,linkSuccess:`스풀이 성공적으로 할당되었습니다`,linkFailed:`스풀 할당 실패`,unlinkSuccess:`스풀이 성공적으로 할당 해제되었습니다`,unlinkFailed:`스풀 할당 해제 실패`,linkedSpool:`할당된 스풀`,spoolId:`스풀 ID`,fillSourceLabel:`(Spoolman)`,weight:`무게`,remaining:`남은 양`,disableWeightSync:`AMS 예상 무게 동기화 비활성화`,disableWeightSyncDesc:`AMS 추정치에서 남은 용량을 업데이트하지 않습니다. AMS 백분율 기반 추정 대신 Spoolman의 사용량 추적을 선호하는 경우 사용하세요. 새 스풀은 여전히 AMS 추정치를 초기 무게로 사용합니다.`,reportPartialUsage:`실패한 인쇄물에 대한 부분 사용량 보고`,reportPartialUsageDesc:`인쇄가 실패하거나 취소될 때 레이어 진행률을 기반으로 해당 시점까지 사용된 예상 필라멘트를 보고합니다.`},locations:{title:`보관 위치`,subtitle:`스풀의 선반, 서랍 등 물리적 보관 장소를 관리합니다`,add:`위치 추가`,addShort:`추가`,edit:`위치 편집`,name:`이름`,spools:`스풀`,sensors:`센서`,empty:`아직 보관 위치가 없습니다. 첫 번째 선반이나 서랍을 만드세요.`,manage:`위치`,createPlaceholder:`예: 선반 A, 서랍 1`,nameRequired:`위치 이름은 필수입니다`,created:`위치가 생성되었습니다`,updated:`위치가 업데이트되었습니다`,deleted:`위치가 삭제되었습니다`,saveFailed:`위치 저장에 실패했습니다`,deleteFailed:`위치 삭제에 실패했습니다`,deleteBlocked:`삭제하기 전에 이 위치의 모든 스풀을 옮기세요`,confirmDelete:`"{{name}}"을(를) 삭제하시겠습니까?`,confirmDeleteMessage:`이 위치가 카탈로그에서 제거됩니다. 스풀을 먼저 옮겨야 합니다.`,confirmDeleteMessageWithSensors:`이 위치가 카탈로그에서 제거됩니다. 스풀을 먼저 옮겨야 합니다. 연결된 센서도 함께 삭제됩니다.`},inventory:{title:`스풀 재고`,addToInventory:`인벤토리에 추가`,addToInventoryPending:`추가 중...`,addToInventorySuccess:`스풀이 인벤토리에 추가됨`,addToInventoryFailed:`스풀을 인벤토리에 추가하지 못함`,unknownSpoolTitle:`새 필라멘트 감지됨`,unknownSpoolMessage:`{{location}}에서 알 수 없는 RFID 태그가 있는 스풀이 감지되었습니다. 지금 인벤토리에 추가하시겠습니까?`,unknownSpoolSlot:`슬롯`,bulk:{selectAllVisible:`표시된 항목 모두 선택`,selectRow:`행 선택`,selectGroup:`그룹 선택`,selectionCount:`{{count}}개 선택됨`,edit:`편집`,printLabels:`라벨 인쇄`,resetUsage:`사용량 재설정`,restore:`복원`,archive:`보관`,delete:`삭제`,clearSelection:`선택 해제`,editTitle:`스풀 일괄 편집`,editSubtitle:`선택한 {{count}}개의 스풀에 적용됩니다. 체크한 필드만 업데이트됩니다.`,editHint:`필드에 입력하면 업데이트할 항목으로 표시됩니다 — 체크된 행만 전송됩니다. 빈 필드는 스풀을 변경하지 않습니다 (필드 비우기는 개별 스풀에서만 가능).`,useCustom:`"{{value}}" 사용`,toggleField:`이 필드의 업데이트 전환`,changeCount:`{{count}}개의 필드가 업데이트됩니다.`,applyPending:`적용 중...`,applyButton:`{{count}}개에 적용`,deleteTitle:`선택한 스풀 삭제`,archiveTitle:`선택한 스풀 보관`,restoreTitle:`선택한 스풀 복원`,resetUsageTitle:`선택한 스풀의 사용량 재설정`,deleteMessage:`{{count}}개의 스풀을 영구적으로 삭제하시겠습니까? 되돌릴 수 없습니다.`,archiveMessage:`{{count}}개의 스풀을 보관하시겠습니까? 나중에 복원할 수 있습니다.`,restoreMessage:`{{count}}개의 보관된 스풀을 복원하시겠습니까?`,resetUsageMessage:`{{count}}개의 스풀에서 "총 사용량" 카운터를 재설정하시겠습니까? 남은 무게는 보존됩니다.`,updateSuccess:`{{count}}개의 스풀 업데이트됨`,updateFailed:`일괄 업데이트 실패`,updatePartial:`{{ok}}개 업데이트, {{failed}}개 실패`,updateAllFailed:`{{count}}개의 업데이트가 모두 실패했습니다 — 재시도를 위해 선택이 유지됩니다`,deleteSuccess:`{{count}}개의 스풀 삭제됨`,deleteFailed:`일괄 삭제 실패`,deletePartial:`{{ok}}개 삭제, {{failed}}개 실패`,deleteAllFailed:`{{count}}개의 삭제가 모두 실패했습니다 — 재시도를 위해 선택이 유지됩니다`,archiveSuccess:`{{count}}개의 스풀 보관됨`,archiveFailed:`일괄 보관 실패`,archivePartial:`{{ok}}개 보관, {{failed}}개 실패`,archiveAllFailed:`{{count}}개의 보관이 모두 실패했습니다 — 재시도를 위해 선택이 유지됩니다`,restoreSuccess:`{{count}}개의 스풀 복원됨`,restoreFailed:`일괄 복원 실패`,restorePartial:`{{ok}}개 복원, {{failed}}개 실패`,restoreAllFailed:`{{count}}개의 복원이 모두 실패했습니다 — 재시도를 위해 선택이 유지됩니다`,invalidHex:`16진수 6자(RRGGBB) 또는 8자(RRGGBBAA)를 입력하세요. 그렇지 않으면 필드가 적용되지 않습니다.`},spoolmanMixedContentTitle:`HTTPS에서 Spoolman을 불러올 수 없음 — 브라우저가 혼합 콘텐츠를 차단함`,spoolmanMixedContentBody:`Bambuddy가 HTTPS로 서비스되고 있지만 Spoolman URL은 여전히 HTTP입니다. 브라우저는 보안상 혼합 콘텐츠를 차단하므로 내장된 Spoolman UI가 렌더링되지 않습니다. 이 기능이 작동하려면 Spoolman이 HTTPS로 접근 가능해야 합니다.`,spoolmanMixedContentFixReverseProxy:`Spoolman을 Bambuddy와 같은 리버스 프록시(Traefik / Nginx / Caddy) 뒤에 HTTPS로 배치한 다음 설정에서 Spoolman URL을 새 HTTPS 주소로 업데이트하세요.`,spoolmanMixedContentFixOpenNewTab:`임시 방편으로 HTTP로 새 브라우저 탭에서 Spoolman을 여세요 — 혼합 콘텐츠 규칙은 내장 프레임에만 적용되므로 독립 탭은 여전히 작동합니다.`,spoolmanOpenInNewTab:`새 탭에서 Spoolman 열기`,labels:{title:`스풀 라벨 인쇄`,selectedCount:`{{count}}개 선택됨`,pickSpools:`라벨을 인쇄할 스풀 선택:`,monochrome:`흑백 (흑백 프린터)`,monochromeHint:`색상 견본을 제거하고 텍스트를 넓힙니다`,startingPosition:`라벨 시작 위치`,startingPositionRange:`시트 템플릿만 해당: L7160은 1–21, 5160은 1–30을 지원합니다.`,startingPositionInvalid:`1에서 {{capacity}} 사이의 정수를 입력하세요.`,startingPositionFirst:`위치 1부터 인쇄를 시작합니다.`,startingPositionSkipped:`첫 번째 시트의 위치 1부터 {{lastPosition}}까지는 비워 둡니다.`,startingPositionRangeError:`이 시트의 시작 위치는 1에서 {{capacity}} 사이여야 합니다.`,searchPlaceholder:`이름, 브랜드 또는 #ID 검색`,filterByMaterial:`재료:`,allMaterials:`전체`,selectVisible:`보이는 모든 항목 선택 ({{count}})`,deselectVisible:`보이는 항목 선택 해제`,clearAll:`모두 초기화`,noSpoolsToShow:`표시할 스풀이 없습니다. 필터를 조정하고 다시 시도하세요.`,noMatches:`현재 검색 또는 필터와 일치하는 스풀이 없습니다.`,printOne:`이 스풀의 라벨 인쇄`,printLabels:`라벨 인쇄…`,bulkTitle:`현재 표시된 {{count}}개에서 라벨을 인쇄할 스풀 선택`,noSpoolsTitle:`라벨을 붙일 스풀 없음`,error:`라벨을 생성할 수 없습니다: {{msg}}`,templates:{box40x30:{label:`박스 라벨 (40 × 30 mm)`,hint:`페이지당 단일 라벨; 일반 DK/Brother 롤 크기, 필라멘트 가방 및 보관함 라벨에 적합.`},box:{label:`박스 라벨 (62 × 29 mm)`,hint:`페이지당 단일 라벨; Brother PT/QL 및 Dymo 소형 라벨에 맞는 크기.`},averyL7160:{label:`Avery L7160 — A4 시트 (38.1 × 63.5 mm × 21)`,hint:`EU 시트; A4 페이지당 21개 라벨.`},avery5160:{label:`Avery 5160 — US Letter 시트 (25.4 × 66.7 mm × 30)`,hint:`US 시트; Letter 페이지당 30개 라벨.`},amsHolderSmall:{label:`AMS 홀더 — 소형 (74 × 33 mm)`,hint:`페이지당 단일 레이블; MakerWorld 모델 752566 (AMS 필라멘트 레이블 홀더)의 인쇄 가능 레이블과 일치합니다.`},amsHolderLarge:{label:`AMS 홀더 — 대형 (75 × 55 mm)`,hint:`페이지당 단일 레이블; AMS 필라멘트 레이블 홀더의 카드스톡 삽입 변형에 맞습니다. 스와치, 브랜드, 재질, ID, QR 코드에 충분한 공간이 있습니다.`}},sortBy:{label:`정렬:`,id:`ID 순`,color:`색상 순`}},csv:{importButton:`CSV 가져오기`,exportButton:`CSV 내보내기`,modalTitle:`CSV에서 스풀 가져오기`,selectFile:`CSV 파일을 선택하거나 여기로 끌어다 놓으세요`,dragHint:`헤더: material(필수), brand, subtype, color_name, rgba, …`,parsing:`파일을 읽는 중…`,previewError:`CSV 파일을 읽을 수 없습니다`,validCount:`유효 {{count}}개`,errorCount:`오류 {{count}}개`,skippedCount:`건너뜀 {{count}}개`,colRow:`행`,colStatus:`상태`,colColor:`색상`,colorResolved:`카탈로그에서 색상 채움`,colorCrossMaterial:`다른 재료에서 색상을 가져옴 — 카탈로그에 정확히 일치하는 항목 없음`,duplicateExisting:`이 재료, 브랜드, 색상의 스풀이 이미 존재합니다 — 그래도 새 스풀로 가져옵니다`,spoolmanHint:`Spoolman 모드에서는 Spoolman의 기본 CSV 가져오기/내보내기를 사용하세요.`,importValidRows:`유효한 {{count}}개 행 가져오기`,noValidRows:`유효한 행 없음`,importing:`가져오는 중…`,importSuccess:`{{count}}개 스풀을 가져왔습니다`,importError:`가져오기 실패`,exportError:`내보내기 실패`},addSpool:`스풀 추가`,editSpool:`스풀 편집`,copySpool:`스풀 복사`,material:`재료`,selectMaterial:`재료 선택...`,subtype:`하위 유형`,brand:`브랜드`,searchBrand:`브랜드 검색...`,useCustomBrand:`"{{brand}}" 사용`,useCustomMaterial:`사용자 지정 재료 사용: {{material}}`,suggestedOptions:`추천`,allOptions:`전체`,colorName:`색상 이름`,colorNamePlaceholder:`제이드 화이트, 파이어 레드...`,color:`색상`,hexColor:`16진수 색상`,pickColor:`사용자 지정 색상 선택`,labelWeight:`라벨 무게`,coreWeight:`빈 스풀 무게`,searchSpoolWeight:`스풀 무게 검색...`,weightUsed:`사용됨`,currentWeight:`남은 무게`,measuredWeight:`측정된 무게`,spoolName:`스풀`,costPerKg:`kg당 비용`,storageLocation:`보관 위치`,temperature:`온도`,humidity:`습도`,battery:`배터리`,storageLocationPlaceholder:`예: 선반 A, 서랍 1`,openInInventory:`재고에서 열기`,measuredWeightError:`측정된 무게는 {{min}}g과 {{max}}g 사이여야 합니다.`,slicerFilament:`슬라이서 필라멘트`,slicerFilamentName:`슬라이서 프리셋 이름`,slicerPreset:`슬라이서 프리셋`,searchPresets:`필라멘트 프리셋 검색...`,selectedPreset:`선택됨`,noPresetsFound:`프리셋을 찾을 수 없음`,tempOverrides:`온도 재정의`,note:`메모`,notePlaceholder:`이 스풀에 대한 추가 메모...`,category:`카테고리`,categoryPlaceholder:`예: 생산, 프로토타입, 고객 A`,categoryNone:`미분류`,lowStockThresholdOverride:`재고 부족 임계값 (이 스풀)`,lowStockThresholdOverrideHelp:`전역 임계값({{global}}%)을 사용하려면 비워두세요.`,clearRfid:`RFID 태그 초기화`,rfidCleared:`RFID 태그가 초기화되었습니다`,archive:`보관`,restore:`복원`,noSpools:`아직 스풀이 없습니다. 첫 번째 스풀을 추가하여 시작하세요.`,noAvailableSpools:`사용 가능한 스풀이 없습니다. 재고에 스풀을 추가하거나 먼저 다른 슬롯에서 해제하세요.`,kProfiles:`K-프로필`,addKProfile:`K-프로필 추가`,assignSpool:`스풀 할당`,unassignSpool:`할당 해제`,assignSuccess:`스풀 할당 및 AMS 슬롯 구성됨`,assignPendingInsert:`할당됨. 스풀을 삽입하면 슬롯이 구성됩니다.`,assignFailed:`스풀 할당 실패`,selectSpool:`이 슬롯에 할당할 스풀 선택`,assigned:`할당됨`,assigning:`할당 중...`,searchSpools:`스풀 검색...`,showAllSpools:`모든 스풀 표시`,spoolmanSpools:`Spoolman 스풀`,allMaterials:`모든 재료`,filterByBrand:`브랜드로 필터...`,showArchived:`보관된 항목 표시`,quickAdd:`빠른 추가 (재고)`,quantity:`수량`,stock:`재고`,configured:`구성됨`,spoolsCreated:`{{count}}개 스풀 생성됨`,spoolsPartiallyCreated:`{{total}}개 중 {{created}}개 스풀 생성됨 (일부 실패)`,spoolCreated:`스풀 생성됨`,spoolUpdated:`스풀 업데이트됨`,spoolDeleted:`스풀 삭제됨`,deepLinkSpoolNotFound:`스풀을 찾을 수 없음`,deepLinkFetchFailed:`스풀을 불러올 수 없음 — 다시 시도하세요`,spoolArchived:`스풀 보관됨`,spoolRestored:`스풀 복원됨`,kProfileSaveFailed:`K-프로필 설정을 저장할 수 없습니다`,syncWeightSpoolNotFound:`스풀을 찾을 수 없음 — 삭제되었을 수 있습니다`,syncWeightSpoolmanUnreachable:`Spoolman에 연결할 수 없음 — 나중에 다시 시도하세요`,syncWeightFailed:`무게 동기화 실패`,spoolmanUnreachable:`Spoolman에 연결할 수 없습니다 — 나중에 다시 시도하세요`,deleteSpoolNotFound:`스풀을 찾을 수 없음 — 이미 삭제되었을 수 있습니다`,deleteFailed:`스풀 삭제 실패`,archiveSpoolNotFound:`스풀을 찾을 수 없음 — 이미 삭제되었을 수 있습니다`,archiveFailed:`스풀 보관 실패`,restoreSpoolNotFound:`스풀을 찾을 수 없음 — 이미 삭제되었을 수 있습니다`,restoreFailed:`스풀 복원 실패`,saveFailed:`변경 사항 저장 실패`,tagClearFailed:`태그 초기화 실패`,deleteConfirm:`이 스풀을 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.`,archiveConfirm:`이 스풀을 보관하시겠습니까?`,advancedSettings:`고급 설정`,filamentInfoTab:`필라멘트 정보`,paProfileTab:`PA 프로필`,colorAndCostTab:`색상 및 비용`,printersTab:`프린터`,filamentInfo:`필라멘트`,additional:`추가`,loadingPresets:`클라우드 프리셋 불러오는 중...`,cloudConnected:`클라우드 연결됨`,cloudNotConnected:`클라우드 연결되지 않음 (기본값 사용)`,recentColors:`최근`,searchColors:`색상 검색...`,searchResults:`검색 결과`,allColors:`모든 색상`,commonColors:`일반 색상`,showLess:`간략히 보기`,showAll:`모두 보기`,noColorsFound:`검색과 일치하는 색상 없음`,noResults:`일치하는 항목 없음`,extraColorsLabel:`추가 색상`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`2~8개의 16진수 색상값을 쉼표로 구분하여 붙여넣으세요. 그라데이션으로 렌더링됩니다.`,extraColorsInvalid:`유효하지 않은 16진수 무시됨: {{tokens}}`,colorEffectLabel:`효과`,colorEffect:{none:`없음`,sparkle:`스파클`,wood:`우드`,marble:`마블`,glow:`글로우`,matte:`매트`,silk:`실크`,galaxy:`갤럭시`,rainbow:`레인보우`,metal:`메탈`,translucent:`반투명`,gradient:`그라데이션`,dualColor:`듀얼 컬러`,triColor:`트리 컬러`,multicolor:`멀티컬러`},selectMaterialFirst:`먼저 필라멘트 정보 탭에서 재료를 선택해 주세요.`,noPrintersConfigured:`구성된 프린터 없음. PA 프로필을 사용하려면 프린터를 추가하세요.`,matchingFilter:`일치`,anyBrand:`모든 브랜드`,anyVariant:`모든 변형`,autoSelect:`자동 선택`,matches:`일치`,match:`일치`,noMatches:`일치 없음`,connected:`연결됨`,offline:`오프라인`,printerOffline:`프린터가 오프라인입니다. 연결하여 보정 프로필을 확인하세요.`,noKProfilesMatch:`선택한 필라멘트와 일치하는 K-프로필이 없습니다.`,leftNozzle:`왼쪽 노즐`,rightNozzle:`오른쪽 노즐`,profilesSelected:`보정 프로필 선택됨`,filamentPreset:`필라멘트 프리셋`,presetUseSpoolDefault:`스풀 프리셋 사용`,presetInherited:`상속됨`,presetOverride:`재정의`,presetNeedsModel:`이 프린터는 아직 모델을 보고하지 않아 전용 프리셋을 지정할 수 없습니다.`,autoMatchPresets:`자동 매칭`,autoMatchPresetsHint:`각 모델 이름이 들어간 스풀 프리셋 변형을 찾습니다`,kProfilesPerPrinter:`K 프로파일`,kProfileNotSet:`설정 안 됨`,kProfileFlowMismatch:`이 프로파일은 {{profile}} 노즐에서 측정되었지만 장착된 노즐은 {{fitted}}이므로 적용되지 않습니다`,nozzle:`노즐`,unknownModel:`알 수 없는 모델`,onePrinter:`프린터 1대`,nPrinters:`프린터 {{n}}대`,filamentPresetsLoadFailed:`이 스풀의 모델별 프리셋을 불러오지 못했습니다`,filamentPresetSaveFailed:`모델별 프리셋을 저장하지 못했습니다`,totalInventory:`총 재고`,totalConsumed:`총 소비량`,byMaterial:`재료별`,inPrinter:`프린터 내`,lowStock:`재고 부족`,sinceTracking:`추적 시작 이후`,loadedInAms:`AMS/외부에 장착됨`,remaining:`남은 양`,weightCheck:`무게 확인`,lastWeighed:`마지막 계량`,neverWeighed:`계량 기록 없음`,search:`스풀 검색...`,showing:`표시 중`,to:`~`,of:`/`,show:`표시`,spools:`스풀`,spool:`스풀`,page:`페이지`,noSpoolsMatch:`결과를 찾을 수 없음`,noSpoolsMatchDesc:`검색 또는 필터를 조정하여 원하는 항목을 찾아보세요.`,active:`활성`,archived:`보관됨`,all:`전체`,used:`사용됨`,new:`새것`,clearFilters:`필터 초기화`,table:`테이블`,cards:`카드`,net:`순`,groupSimilar:`그룹화`,groupedSpools:`동일한 스풀 {{count}}개`,groupedRows:`행`,columns:`열`,configureColumns:`열 구성`,configureColumnsDesc:`드래그하여 열 순서를 변경하거나 화살표를 사용하세요. 눈 아이콘으로 표시 여부를 전환합니다.`,visible:`표시됨`,reset:`초기화`,cancel:`취소`,applyChanges:`변경 사항 적용`,moveUp:`위로 이동`,moveDown:`아래로 이동`,hideColumn:`열 숨기기`,showColumn:`열 표시`,linkToSpool:`스풀에 연결`,tagLinked:`태그가 스풀에 연결됨`,tagLinkFailed:`태그 연결 실패`,tagAlreadyLinked:`태그가 이미 스풀 #{{id}}에 연결됨`,unknownTag:`알 수 없는 RFID 태그 감지됨`,usageHistory:`사용 기록`,noUsageHistory:`사용 기록 없음`,printName:`인쇄 이름`,weightConsumed:`소비 무게`,clearHistory:`초기화`,historyCleared:`사용 기록 초기화됨`,fillSourceLabel:`(재고)`,lowStockThresholdError:`임계값은 0.1에서 99.9 사이여야 합니다`,assignMismatchTitle:`재료 불일치`,assignMismatchMessage:`선택한 스풀 재료 "{{spoolMaterial}}"이(가) {{location}}의 트레이 재료 "{{trayMaterial}}"과(와) 일치하지 않습니다. 그래도 할당하시겠습니까?`,assignMismatchConfirm:`그래도 할당`,assignPartialMismatchMessage:`스풀 재료 "{{spoolMaterial}}"이(가) {{location}}의 "{{trayMaterial}}"과(와) 유사하지만 정확히 일치하지 않습니다. 계속하시겠습니까?`,assignProfileMismatchMessage:`스풀 프로필 "{{spoolProfile}}"이(가) {{location}}의 트레이 프로필 "{{trayProfile}}"과(와) 일치하지 않습니다. 계속하시겠습니까?`,assignReconfigureNote:`AMS 슬롯이 스풀의 프로필을 사용하도록 재구성됩니다.`,spoolmanFilamentCatalog:`Spoolman 필라멘트 카탈로그`,pickFromSpoolmanCatalog:`Spoolman 카탈로그에서 선택…`,spoolmanFilamentSelected:`Spoolman 카탈로그에서 필라멘트 선택됨`,spoolmanFilamentUnlinked:`필라멘트 카탈로그 연결 해제됨`,noSpoolmanFilaments:`Spoolman 카탈로그에서 필라멘트를 찾을 수 없음`,spoolmanFilamentColorSwatch:`필라멘트 색상`,spoolWeightManagedBySpoolman:`빈 스풀 무게는 Spoolman에서 필라멘트 유형별로 관리됩니다`,spoolmanCatalogLoadFailed:`Spoolman 필라멘트 카탈로그 불러오기 실패`,subtitle:`스풀 관리`,storageLocationNone:`위치 미설정`,resetConsumedCounter:`카운터 초기화`,resetConsumedCounterTooltip:`이 스풀의 소비된 그램 카운터를 0으로 초기화합니다. 잔여 무게는 변경되지 않습니다.`,resetConsumedCounterConfirm:`이 스풀의 소비된 그램 카운터를 0으로 초기화하시겠습니까? 이후 인쇄는 처음부터 추적됩니다. 스풀 자체, 잔여 무게 계산 및 설정은 변경되지 않습니다.`,resetAllConsumedCounters:`모든 카운터 초기화`,resetAllConsumedCountersTooltip:`모든 스풀의 소비된 그램 카운터를 0으로 초기화합니다. 잔여 무게는 변경되지 않습니다.`,resetAllConsumedCountersConfirm:`{{count}}개 스풀(아카이브 포함)의 소비된 그램 카운터를 모두 0으로 초기화하시겠습니까? 이는 "총 소비량" 통계를 지워 이후 인쇄가 처음부터 추적되도록 합니다. 스풀과 잔여 무게는 변경되지 않습니다.`,consumedCounterReset:`카운터가 초기화되었습니다`,allConsumedCountersReset:`{{count}}개 스풀의 카운터가 초기화되었습니다`,resetConsumedCounterFailed:`카운터 초기화 실패`},timelapse:{title:`타임랩스`,create:`타임랩스 만들기`,download:`다운로드`,delete:`삭제`,preview:`미리보기`,frameRate:`프레임 속도`,quality:`품질`,processing:`처리 중...`,noTimelapses:`사용 가능한 타임랩스 없음`},ams:{title:`AMS`,slot:`슬롯`,empty:`비어 있음`,emptySlot:`빈 슬롯`,unknown:`알 수 없음`,humidity:`습도`,temperature:`온도`,filamentType:`필라멘트 유형`,filamentColor:`색상`,remaining:`남은 양`,history:`AMS 기록`,noHistory:`기록 없음`,configureSlot:`슬롯 구성`,externalSpool:`외부 스풀`,profile:`프로필`,kFactor:`K 계수`,kFactorShort:`K`,fill:`채우기`,configure:`구성`,used:`사용됨`,remainingUnit:`남음`,slotEmpty:`비어 있음`,slotUnconfigured:`?`,emptySlotReset:`필라멘트가 할당되지 않음`},printModal:{variants:{editNote:`이 대안은 대기열에 추가할 때 정해집니다. 변경하려면 취소 후 다시 추가하세요.`,title:`프린터 대안`,help:`작업 하나, 대기열 한 자리. 조건이 맞는 프린터 중 먼저 비는 프린터가 해당 파일을 인쇄합니다.`,unknownModel:`알 수 없는 모델`,plateFor:`{{filename}}의 플레이트`,moveUp:`위로`,moveDown:`아래로`,queued:`대안 {{count}}개와 함께 대기열에 추가했습니다`},selectPrinter:`프린터 선택`,selectPlate:`플레이트 선택`,filamentMapping:`필라멘트 매핑`,useArchiveMapping:`매핑`,useArchiveMappingTooltip:`유형/색상으로 매칭하는 대신, 이 아카이브에 저장된 AMS 매핑(슬라이서 제공)에서 모든 슬롯을 선택합니다.`,clickToChangeSlot:`클릭하여 슬롯 할당 변경`,reRead:`다시 읽기`,plateN:`플레이트 {{n}}`,plateFilamentsUnreadable:`선택한 플레이트의 필라멘트를 읽을 수 없어 매핑할 수 없습니다. 해당 플레이트를 선택 해제하면 나머지를 대기열에 추가할 수 있습니다.`,totalCost:`총 비용:`,slotRemainingShort:` - {{grams}}g 남음`,printSettings:`인쇄 설정`,bedLeveling:`베드 레벨링`,flowCalibration:`유량 보정`,vibrationCalibration:`진동 보정`,layerInspection:`첫 번째 레이어 검사`,timelapse:`타임랩스`,cancel:`취소`,noPrintersAvailable:`사용 가능한 프린터 없음`,printerBusy:`프린터가 사용 중입니다`,printerOffline:`프린터가 오프라인입니다`,sameTypeDifferentColor:`같은 유형, 다른 색상`,filamentTypeNotLoaded:`필라멘트 유형이 장착되지 않음`,statusReady:`준비됨`,statusColorMismatch:`색상 불일치`,statusTypeNotFound:`유형을 찾을 수 없음`,requiredTooltip:`필요: {{name}} - {{color}}`,manuallySelected:`수동으로 선택됨`,autoMatched:`자동으로 일치됨`,selectSlot:`슬롯 선택`,sameTypeDifferentColorDetail:`같은 유형, 다른 색상: {{required}} 필요, 슬롯에는 {{loaded}}`,requiredTypeNotInPrinter:`필요한 필라멘트 유형을 프린터에서 찾을 수 없습니다.`,whenToPrint:`인쇄 시점`,asap:`최대한 빨리`,queue:`대기열`,schedule:`예약`,dateTime:`날짜 및 시간`,invalidDateTime:`유효한 날짜와 시간을 입력하세요`,openCalendar:`달력 열기`,requireManualStart:`수동 시작 필요`,requirePreviousSuccess:`이전 인쇄가 성공한 경우에만 시작`,autoOffAfter:`완료 후 프린터 전원 끄기`,helpAsap:`인쇄가 대기열 맨 앞에 추가되고 적합한 프린터가 유휴 상태가 되는 즉시 시작됩니다.`,helpSchedule:`프린터가 유휴 상태이면 예약된 시간에 인쇄가 시작됩니다. 사용 중이면 프린터가 사용 가능해질 때까지 대기합니다.`,helpQueue:`인쇄가 대기열 맨 뒤에 추가됩니다.`,leftNozzle:`L`,rightNozzle:`R`,leftNozzleTooltip:`왼쪽 노즐`,rightNozzleTooltip:`오른쪽 노즐`,ftsSameInletHint:`이 출력에 사용할 필라멘트가 모두 필라멘트 트랙 스위치 IN-{{inlet}}에 있습니다. 같은 입구의 필라멘트끼리 교체하면 느립니다. 하나를 반대쪽 입구의 AMS로 옮기면 빨라집니다.`,rackPosition:`랙 위치`,rackPositionTooltip:`이 필라멘트를 출력할 랙의 노즐입니다. 위치 번호는 프린터와 동일합니다.`,rackEmptyPosition:`이 랙 위치는 비어 있습니다`,rackWrongNozzle:`{{has}} 노즐이 장착되어 있습니다. 이 필라멘트에는 {{needs}}이(가) 필요합니다`,filamentOverride:`필라멘트 재정의`,filamentOverrideHint:`선택적으로 모델 기반 할당을 위해 필라멘트를 재정의합니다. 스케줄러는 원래 3MF 값 대신 선택한 필라멘트와 일치시킵니다.`,originalFilament:`원래`,overrideWith:`재정의`,resetToOriginal:`원래대로 초기화`,insufficientFilamentTitle:`필라멘트 부족`,waitingForAmsStatus:`{{printer}}의 AMS 상태를 기다리는 중…`,insufficientFilamentMessage:`일부 할당된 스풀에 이 인쇄에 필요한 것보다 적은 필라멘트가 남아 있습니다:`,insufficientFilamentLine:`{{printer}} - {{slot}}: {{required}}g 필요, {{remaining}}g 남음`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: {{required}}g 필요, 일치하는 스풀 합계 {{remaining}}g (AMS 필라멘트 백업)`,printAnyway:`그래도 인쇄`,forceColorMatch:`색상 일치 강제`,staggerPrinterStarts:`프린터 시작 분산`,staggerGroupSize:`그룹 크기`,staggerInterval:`간격 (분)`,staggerPreview:`{{printers}}대 프린터 → {{size}}대씩 {{groups}}개 그룹, 매 {{interval}}분마다 시작`,staggerLastGroup:`마지막 그룹: {{count}}`,staggerTotal:`합계: {{minutes}}분`,staggerToPrinters:`{{count}}대 프린터에 분산`,gcodeInjection:`자동 인쇄 G-code 삽입`,insufficientBudget:`예산 부족`,unlimitedNoBudget:`무제한 – 예산 한도가 설정되지 않았습니다.`,noPrintableCostCenters:`인쇄에 사용할 수 있는 활성 비용 센터가 없습니다. 관리자에게 인쇄 권한을 요청하세요.`},backup:{includesEncryptionKey:`로컬 백업에는 MFA 암호화 키 파일(DATA_DIR/.mfa_encryption_key)이 포함되어 백업 ZIP이 자체 완결됩니다. ZIP 파일을 민감하게 취급하세요 — 파일을 가진 누구나 내부에 저장된 OIDC 클라이언트 비밀과 TOTP 비밀을 복호화할 수 있습니다.`,title:`백업 및 복원`,createBackup:`백업 만들기`,restoreBackup:`백업 복원`,restoreDescription:`백업 파일에서 모든 데이터 교체`,downloadBackup:`백업 다운로드`,uploadBackup:`백업 업로드`,lastBackup:`마지막 백업`,autoBackup:`자동 백업`,backupNow:`지금 백업`,restoreWarning:`경고: 백업을 복원하면 현재 모든 데이터를 덮어씁니다.`,includeArchives:`아카이브 포함`,includeSettings:`설정 포함`,includeProfiles:`프로필 포함`,backupSuccess:`백업이 성공적으로 생성되었습니다`,restoreSuccess:`백업이 성공적으로 복원되었습니다`,backupFailed:`백업 실패`,restoreFailed:`복원 실패`,restoreNote:`복원 중 가상 프린터가 중지됩니다`,githubBackup:`Git 백업`,enabled:`활성화됨`,cloudLoginRequired:`Bambu 클라우드 로그인 필요. GitHub 백업을 활성화하려면 프로필 → 클라우드 프로필에서 로그인하세요.`,cloudLoginRequiredShort:`클라우드 로그인 필요`,githubDescription:`백업 및 버전 기록을 위해 비공개 GitHub 저장소에 프로필을 자동으로 동기화합니다.`,repositoryUrl:`저장소 URL`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`비보안 HTTP 허용`,allowInsecureHttpHint:`TLS가 없는 개인 네트워크의 자체 호스팅 인스턴스에 활성화`,personalAccessToken:`개인 액세스 토큰`,tokenSaved:`(저장됨)`,enterNewToken:`업데이트하려면 새 토큰 입력`,tokenHintGitHub:`Contents 읽기 및 쓰기 권한이 있는 세분화된 토큰 또는 repo 범위를 가진 클래식 토큰.`,tokenHintGitLab:`api 범위 또는 read_repository와 write_repository를 함께 가진 토큰.`,tokenHintGitea:`write:repository 범위를 가진 토큰.`,tokenHintForgejo:`write:repository 범위를 가진 토큰. 이 저장소 하나로만 제한된 토큰이면 충분합니다.`,branch:`브랜치`,provider:`Git 제공자`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`수동만`,hourly:`매시간`,daily:`매일`,weekly:`매주`,includeInBackup:`백업에 포함`,kProfiles:`K-프로필`,kProfilesDescription:`연결된 프린터의 압력 전진 보정`,noPrintersConnected:`연결된 프린터 없음`,printersConnected:`{{total}}개 중 {{connected}}개 연결됨`,cloudProfiles:`클라우드 프로필`,cloudProfilesDescription:`Bambu 클라우드와 Orca 클라우드의 필라멘트, 프린터 및 프로세스 프리셋`,cloudProfilesAccounts:`연결된 계정 — Bambu 클라우드: {{bambu}}, Orca 클라우드: {{orca}}`,appSettings:`앱 설정`,appSettingsDescription:`Bambuddy 구성 (전체 데이터베이스)`,spoolInventory:`스풀 재고`,spoolInventoryDescription:`필라멘트 스풀, 사용 기록 및 비용 추적`,printArchives:`인쇄 아카이브`,printArchivesDescription:`인쇄 기록 메타데이터 (gcode/3MF 파일 제외)`,lastBackupAt:`마지막 백업:`,noBackupsYet:`아직 백업 없음`,next:`다음:`,startingBackup:`백업 시작 중...`,test:`테스트`,enableBackup:`백업 활성화`,testConnection:`연결 테스트`,enterRepoUrl:`저장소 URL 입력`,enterRepoAndToken:`저장소 URL 및 액세스 토큰 입력`,repoRequired:`저장소 URL이 필요합니다`,tokenRequired:`액세스 토큰이 필요합니다`,githubBackupEnabled:`GitHub 백업 활성화됨`,tokenUpdated:`토큰 업데이트됨`,settingsSaved:`설정 저장됨`,failedToSave:`저장 실패: {{message}}`,backupCompleteFiles:`백업 완료 - {{count}}개 파일 업데이트됨`,backupSkippedNoChanges:`변경 사항 없어 백업 건너뜀`,backupFailed2:`백업 실패: {{message}}`,clearedLogs:`{{count}}개 로그 초기화됨`,failedToClearLogs:`로그 초기화 실패: {{message}}`,restoreFromGit:{button:`Git에서 복원`,title:`Git 백업에서 복원`,subtitle:`커밋과 복원할 항목을 선택하세요`,commitLabel:`백업 커밋`,latestCommit:`최신 백업 (브랜치 최신 커밋)`,categoriesLabel:`복원할 항목`,inspecting:`백업 내용을 읽고 있습니다...`,itemCount:`백업에 {{count}}개`,overwriteLabel:`기존 항목 덮어쓰기`,overwriteOn:`기존 항목이 백업 내용으로 업데이트됩니다.`,overwriteOff:`없는 항목만 추가되고 기존 항목은 그대로 유지됩니다.`,selectedCount:`{{count}}개 선택됨`,restoring:`복원 중...`,confirmTitle:`백업에서 복원하시겠습니까?`,confirmMessage:`선택한 항목을 이 커밋에서 복원합니다. 없는 항목은 추가되고 기존 항목은 그대로 유지됩니다.`,confirmMessageOverwrite:`선택한 항목을 이 커밋에서 복원하고 로컬에 이미 있는 항목을 덮어씁니다. 이 작업은 취소할 수 없습니다.`,kprofilesOverwriteCaveat:`K 프로파일은 예외입니다. 슬롯에 쓰면 프린터의 캘리브레이션이 항상 교체됩니다.`,tally:`복원 {{restored}}개, 건너뜀 {{skipped}}개, 실패 {{failed}}개`,reloadHint:`복원된 데이터가 모든 화면에 반영되도록 Bambuddy를 새로 고치세요.`,partialHint:`위에 표시된 카테고리는 완료되어 저장되었습니다. 표시되지 않은 카테고리는 실행되지 않았습니다.`,failed:`복원에 실패했습니다.`,loadFailed:`백업 저장소를 읽을 수 없습니다.`,details:{notPresent:`이 백업 커밋에는 없습니다`,unreadableJson:`읽을 수 없는 JSON: {{paths}}`,settingsNoPayload:`데이터에 설정이 없습니다`,settingsCredentialsWillSkip:`자격 증명처럼 보이는 키 {{count}}개를 건너뜁니다`,settingsCompanionWillSkip:`자격 증명처럼 보이는 키 {{count}}개를 건너뛰고, 이에 의존하는 스위치 {{companion}}개는 꺼진 상태로 둡니다`,settingsCompanionOnlyWillSkip:`스위치 {{companion}}개는 꺼진 상태로 둡니다 - 각각에 필요한 자격 증명은 백업에서 복원할 수 없습니다`,spoolsUsageCount:`사용 기록 {{count}}건 포함`,archivesMetadataOnly:`메타데이터만 - 3MF 파일과 썸네일은 Git 백업에 포함되지 않습니다`,kprofilesPrinterCount:`프린터 {{count}}대 분량`},notes:{noData:`이 백업에는 이런 종류의 데이터가 없습니다`,archivesPrinterMissing:`일부 아카이브가 더 이상 존재하지 않는 프린터를 참조했습니다 - 연결을 해제했습니다`,archivesProjectMissing:`일부 아카이브가 더 이상 존재하지 않는 프로젝트를 참조했습니다 - 연결을 해제했습니다`,archivesOwnerCleared:`일부 아카이브가 더 이상 존재하지 않는 사용자를 참조했습니다 - 소유자를 비웠으므로 관리자가 다시 지정하기 전까지 archives:read_all 권한이 있는 사용자에게만 보입니다`,archivesOwnerUnmatched:`일부 아카이브가 이 인스턴스에 없는 소유자를 가리킵니다 - 백업의 사용자 ID로 추측하지 않고 소유자를 비웠으므로 관리자가 다시 지정하기 전까지 archives:read_all 권한이 있는 사용자에게만 보입니다`,archivesOwnerUnknown:`일부 아카이브가 소유자 없이 복원되었습니다 - 이 백업에 소유자가 기록되어 있지 않으므로 관리자가 지정하기 전까지 archives:read_all 권한이 있는 사용자에게만 보입니다`,archivesUndeleted:`백업 이후 삭제된 아카이브가 다시 표시됩니다 - 덮어쓰기가 켜져 있었습니다`,archivesMetadataOnly:`복원된 아카이브에는 메타데이터만 있습니다 - 3MF 파일과 썸네일은 Git 백업에 포함되지 않습니다`,spoolUsageUnresolved:`사용 기록 {{count}}건을 건너뛰었습니다 - 해당 스풀이 이 백업의 스풀 목록에 없어 연결할 대상이 없습니다.`,spoolUsageUnlinked:`사용 기록 {{count}}건을 출력 기록 연결 없이 복원했습니다 - 연결을 유지하려면 스풀 재고와 함께 출력 아카이브도 선택하세요.`,spoolTagKept:`스풀 태그 {{count}}개를 그대로 두었습니다 - 백업대로라면 그 사이 스캔된 태그가 지워지거나 다른 스풀로 옮겨졌을 것입니다.`,settingsCredentialsSkipped:`자격 증명처럼 보이는 키 {{count}}개를 건너뛰었습니다 - 비밀 값은 직접 다시 입력하세요`,settingsAuthSkipped:`인증 설정 {{count}}개를 건너뛰었습니다 - 잠금 검사가 계속 동작하도록 설정 > 인증에서 변경하세요`,settingsCompanionSkipped:`{{keys}}을(를) 꺼진 상태로 두었습니다 - 각 항목에 필요한 자격 증명은 백업에서 복원할 수 없고 이 인스턴스에도 저장되어 있지 않아, 켜면 연동이 인증 없이 열립니다`,settingsMqttRelayFailed:`MQTT 설정을 복원했지만 릴레이를 다시 연결하지 못했습니다 - Bambuddy를 재시작하세요`,kprofilesAlwaysOverwrite:`K 프로파일은 항상 프린터의 해당 슬롯을 덮어씁니다`,kprofilesAckUnreliable:`응답하지 않는 프린터도 복원됨으로 집계됩니다 - 프린터에서 프로파일을 확인하세요`,kprofilesPrinterMissing:`시리얼 {{serial}}인 프린터가 없습니다 - 건너뛰었습니다`,kprofilesPrinterOffline:`{{printer}}({{serial}})이(가) 연결되어 있지 않습니다 - 건너뛰었습니다`,kprofilesUnknownNozzle:`{{serial}}의 예상치 못한 노즐 직경 {{nozzle}} - 그대로 전송했습니다`,kprofilesUnmatched:`{{nozzle}}용 프로파일 {{count}}개가 {{printer}}에 대응 항목이 없습니다 - 새 프로파일로 추가했습니다`,kprofilesSendFailed:`{{nozzle}} 프로파일을 {{printer}}({{serial}})에 보내지 못했습니다`,kprofilesRefused:`{{printer}}({{serial}})이(가) {{nozzle}} 프로파일을 거부했습니다: {{reason}}`,kprofilesStepFailed:`K 프로파일 단계를 완료하지 못했습니다 - {{reason}}. 그 전에 복원된 항목은 그대로 저장되어 있습니다.`}},history:`기록`,clear:`초기화`,date:`날짜`,status:`상태`,trigger:`유형`,triggers:{manual:`백업(수동)`,scheduled:`백업(예약)`,restore:`복원`},commit:`커밋`,localBackup:`로컬 백업`,localBackupDescription:`데이터베이스, 아카이브, 업로드 및 모든 파일을 포함한 Bambuddy 데이터의 전체 백업을 만듭니다.`,downloadBackupLabel:`백업 다운로드`,completeBackupZip:`전체 백업: 데이터베이스 + 모든 파일 (ZIP)`,download:`다운로드`,preparingBackup:`백업 준비 중...`,creatingArchive:`백업 아카이브 생성 중... 대용량 아카이브의 경우 시간이 걸릴 수 있습니다.`,downloadingFile:`백업 파일 다운로드 중...`,backupDownloaded:`백업이 성공적으로 다운로드되었습니다`,failedToCreateBackup:`백업 생성 실패: {{message}}`,restore:`복원`,restoreReplacesAll:`복원은 모든 데이터를 교체합니다.`,restoreReplacesAllDetail:`현재 데이터베이스와 파일이 완전히 교체됩니다. 복원 후 재시작이 필요합니다.`,restoreConfirmTitle:`백업 복원`,restoreConfirmMessage:`"{{filename}}"에서 복원하시겠습니까? 현재 데이터베이스와 모든 파일이 완전히 교체됩니다. 복원 후 애플리케이션을 재시작해야 합니다.`,restoreConfirmButton:`백업 복원`,uploadingFile:`백업 파일 업로드 중...`,backupRestoredRestart:`백업 복원됨. Bambuddy를 재시작하세요.`,failedToRestore:`백업 복원 실패. 파일 형식을 확인하세요.`,reloadNow:`지금 새로고침`,creatingBackup:`백업 만드는 중`,restoringBackup:`백업 복원 중`,preparing:`준비 중...`,processing:`처리 중...`,doNotClosePage:`이 페이지를 닫거나 다른 곳으로 이동하지 마세요. 대용량 백업의 경우 몇 분이 걸릴 수 있습니다.`,restoring:`복원 중...`,restoreComplete:`복원 완료`,restoreFailed2:`복원 실패`,importSettings:`백업 파일에서 설정 가져오기`,pleaseWaitRestoring:`데이터가 복원되는 동안 기다려 주세요`,selectBackupFile:`백업 파일 클릭하여 선택 (.json 또는 .zip)`,duplicateHandling:`중복 처리 방법:`,matchPrinters:`프린터`,matchPrintersBy:`일련번호로 일치`,matchSmartPlugs:`스마트 플러그`,matchSmartPlugsBy:`IP 주소로 일치`,matchNotificationProviders:`알림 제공자`,matchNotificationProvidersBy:`이름으로 일치`,matchFilaments:`필라멘트`,matchFilamentsBy:`이름 + 유형 + 브랜드로 일치`,matchArchives:`아카이브`,matchArchivesBy:`콘텐츠 해시로 일치 (항상 건너뜀)`,matchPendingUploads:`대기 중인 업로드`,matchPendingUploadsBy:`파일 이름으로 일치`,matchSettingsTemplates:`설정 및 템플릿`,matchSettingsTemplatesBy:`항상 덮어씀`,replaceExisting:`기존 데이터 교체`,keepExisting:`기존 데이터 유지`,overwriteDescription:`백업 데이터로 이미 존재하는 항목 덮어쓰기`,keepDescription:`아직 존재하지 않는 항목만 복원`,overwriteCaution:`주의:`,overwriteWarning:`덮어쓰기는 현재 구성을 백업 데이터로 교체합니다. 보안상 프린터 액세스 코드는 절대 덮어쓰지 않습니다.`,cancel:`취소`,processingBackup:`백업 파일 처리 중...`,itemsRestored:`복원된 항목`,itemsSkipped:`건너뛴 항목`,restored:`복원됨`,skippedAlreadyExist:`건너뜀 (이미 존재)`,filesCategory:`파일 (3MF, 썸네일 등)`,andMore:`...및 {{count}}개 더`,newApiKeysGenerated:`새 API 키 생성됨`,keysShownOnce:`이 키는 한 번만 표시됩니다. 지금 복사하세요!`,copy:`복사`,noDataFound:`백업 파일에서 복원할 데이터를 찾을 수 없습니다.`,close:`닫기`,scheduledBackup:`예약 백업`,scheduledBackupDescription:`일정에 따라 백업 스냅샷을 자동으로 생성합니다. 출력 디렉토리를 NAS 또는 외부 저장소에 마운트할 수 있습니다.`,frequency:`주기`,backupTime:`시간`,retention:`보존`,retentionDescription:`유지할 백업 수`,outputPath:`출력 경로`,outputPathPlaceholder:`기본값: {{path}}`,outputPathDescription:`기본 위치를 사용하려면 비워두세요`,runNow:`지금 실행`,backupFiles:`백업 파일`,noScheduledBackups:`아직 백업 없음`,deleteBackup:`삭제`,deleteBackupConfirm:`이 백업 파일을 삭제하시겠습니까?`,backupRunning:`백업 진행 중...`,scheduledBackupComplete:`백업이 성공적으로 완료되었습니다`,scheduledBackupFailed:`백업 실패`,nextBackup:`다음 백업`,backupSize:`크기`,localTimeHint:`현지 시간 ({{tz}})`,defaultPathLabel:`기본값:`,pathCheck:{title:`Bambuddy가 이 디렉터리에 쓸 수 없습니다`,howToFix:`해결 방법:`,sandboxed:`Bambuddy 서비스가 {{path}}에 쓸 수 없습니다. systemd 유닛이 ProtectSystem=strict로 실행되어 설치·데이터·로그 디렉터리를 제외한 모든 디렉터리가 서비스에서는 읽기 전용입니다. 사용자 셸에서는 쓸 수 있는 디렉터리라도 마찬가지입니다.`,read_only:`{{path}}이(가) 읽기 전용 파일 시스템에 있습니다.`,permission_denied:`Bambuddy에 {{path}} 쓰기 권한이 없습니다. 디렉터리 소유자와 권한을 확인하세요.`,no_space:`{{path}}이(가) 있는 파일 시스템에 남은 공간이 없습니다.`,not_a_directory:`{{path}}이(가) 존재하지만 디렉터리가 아닙니다.`,missing:`{{path}}이(가) 존재하지 않으며 생성할 수도 없습니다.`,error:`Bambuddy가 {{path}}에 쓸 수 없습니다.`,ephemeralTitle:`이 백업은 컨테이너를 다시 만들면 사라집니다`,container_ephemeral:`{{path}}은(는) 호스트가 아니라 Bambuddy 컨테이너 내부에 있습니다. 여기에 기록된 백업은 컨테이너를 재생성하면 사라집니다. 호스트의 디렉터리를 마운트하세요:`},categories:{settings:`설정`,notification_providers:`알림 제공자`,notification_templates:`알림 템플릿`,smart_plugs:`스마트 플러그`,printers:`프린터`,filaments:`필라멘트`,maintenance_types:`유지 관리 유형`,archives:`아카이브`,projects:`프로젝트`,pending_uploads:`대기 중인 업로드`,external_links:`외부 링크`,api_keys:`API 키`},repoIsPrivate:`저장소가 비공개입니다 — 안전하게 백업할 수 있습니다.`,repoIsPublicWarning:`저장소가 공개입니다. Bambuddy 백업에는 MQTT 자격증명, Home Assistant 토큰, Prometheus 토큰, Bambu Cloud 이메일, K-프로파일을 통한 프린터 액세스 코드가 포함됩니다. 공급자 설정에서 저장소를 비공개로 변경할 때까지 저장이 차단됩니다.`,repoVisibilityUnknown:`저장소 공개 여부를 확인할 수 없습니다. Bambuddy는 비공개로 확인된 저장소에만 백업하며, 저장이 차단됩니다.`},tags:{title:`태그`,addTag:`태그 추가`,editTag:`태그 편집`,deleteTag:`태그 삭제`,tagName:`태그 이름`,tagColor:`태그 색상`,noTags:`태그 없음`,deleteConfirm:`이 태그를 삭제하시겠습니까?`,manageTags:`태그 관리`},uploadModal:{title:`3MF 파일 업로드`,dragDrop:`.3mf 파일을 여기에 드래그 앤 드롭`,or:`또는`,browseFiles:`파일 탐색`,extractionInfo:`프린터 모델은 3MF 파일 메타데이터에서 자동으로 추출됩니다.`,uploaded:`업로드됨`,failed:`실패`,uploading:`업로드 중...`,upload:`업로드`,uploadFailed:`업로드 실패`},editArchive:{title:`아카이브 편집`,name:`이름`,namePlaceholder:`인쇄 이름`,printer:`프린터`,noPrinter:`프린터 없음`,project:`프로젝트`,noProject:`프로젝트 없음`,itemsPrinted:`인쇄된 항목`,itemsPrintedHelp:`이 인쇄 작업에서 생산된 항목 수. 플레이트 전체를 버린 경우 0을 입력하세요.`,filamentUsed:`사용된 필라멘트 (g)`,filamentUsedPlaceholder:`예: 46.16`,filamentUsedHelp:`3MF 없이 보관된 인쇄는 직접 입력하면 필라멘트 합계에 반영됩니다. 3MF가 있는 보관 항목을 다시 스캔하면 이 값은 파일에서 다시 읽어옵니다.`,notes:`메모`,notesPlaceholder:`이 인쇄에 대한 메모 추가...`,externalLink:`외부 링크`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Printables, Thingiverse 또는 다른 출처 링크`,tags:`태그`,tagsPlaceholder:`태그 추가...`,addMoreTags:`더 많은 태그 추가...`,matchingTags:`"{{query}}"와 일치`,existingTags:`기존 태그`,clickToAdd:`(클릭하여 추가)`,status:`상태`,failureReason:`실패 원인`,selectReason:`원인 선택...`,photos:`인쇄 결과 사진`,photosHelp:`+를 클릭하여 인쇄 결과 사진 추가`,printResult:`인쇄 결과`,saving:`저장 중...`,failureReasons:{adhesionFailure:`접착 실패`,spaghettiDetached:`스파게티 / 분리`,layerShift:`레이어 시프트`,cloggedNozzle:`노즐 막힘`,filamentRunout:`필라멘트 소진`,warping:`휨`,stringing:`스트링`,underExtrusion:`압출 부족`,powerFailure:`전원 실패`,userCancelled:`사용자 취소`,noStatusUpdate:`상태 업데이트를 받지 못함`,other:`기타`},statuses:{completed:`완료됨`,failed:`실패`,aborted:`취소됨`,printing:`인쇄 중`}},kProfiles:{title:`K-프로필`,noPrintersConfigured:`구성된 프린터 없음`,addPrinterInSettings:`K-프로필을 관리하려면 설정에서 프린터를 추가하세요`,noActivePrinters:`활성 프린터 없음`,enablePrinterConnection:`K-프로필을 보려면 프린터 연결을 활성화하세요`,loadingProfiles:`K-프로필 불러오는 중...`,printerOffline:`프린터 오프라인`,printerOfflineDesc:`선택한 프린터가 연결되지 않았습니다. 켜서 K-프로필을 확인하세요.`,noMatchingProfiles:`일치하는 프로필 없음`,noMatchingProfilesDesc:`검색 기준과 일치하는 프로필이 없습니다`,noKProfiles:`K-프로필 없음`,noKProfilesDesc:`{{diameter}}mm 노즐에 대한 압력 전진 프로필이 없습니다`,createFirstProfile:`첫 번째 프로필 만들기`,printer:`프린터`,nozzle:`노즐`,refresh:`새로고침`,addProfile:`프로필 추가`,export:`내보내기`,import:`가져오기`,select:`선택`,selectAll:`모두 선택`,delete:`삭제`,searchPlaceholder:`이름 또는 필라멘트로 검색...`,allExtruders:`모든 압출기`,leftOnly:`왼쪽만`,rightOnly:`오른쪽만`,allFlow:`모든 유량`,hfOnly:`HF만`,sOnly:`S만`,sortName:`정렬: 이름`,sortKValue:`정렬: K값`,sortFilament:`정렬: 필라멘트`,leftExtruder:`왼쪽 압출기`,rightExtruder:`오른쪽 압출기`,modal:{addTitle:`K-프로필 추가`,editTitle:`K-프로필 편집`,profileName:`프로필 이름`,profileNamePlaceholder:`내 PLA 프로필`,kValue:`K값`,kValuePlaceholder:`0.020`,kValueHelp:`일반 범위: PLA 0.01~0.06, PETG 0.02~0.10`,filament:`필라멘트`,selectFilament:`필라멘트 선택...`,source:{local:`가져온 것`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`기본 제공`},noFilamentsHelp:`사용할 수 있는 필라먼트가 없습니다. Bambu Cloud에 로그인하거나 프로파일 → 로컬 프로파일에서 프리셋을 가져오세요.`,searchFilaments:`필라먼트 검색...`,noFilamentMatches:`검색과 일치하는 필라먼트가 없습니다`,flowType:`유량 유형`,highFlow:`고유량`,standard:`표준`,nozzleSize:`노즐 크기`,extruder:`압출기`,extruders:`압출기`,left:`왼쪽`,right:`오른쪽`,notes:`메모 (로컬 저장)`,notesPlaceholder:`이 프로필에 대한 메모 추가...`,notesHelp:`메모는 프린터가 아닌 Bambuddy에 저장됩니다`,syncing:`프린터와 동기화 중...`,savingExtruder:`압출기 {{current}}/{{total}}에 저장 중...`,pleaseWait:`기다려 주세요`},deleteConfirm:{title:`프로필 삭제`,cannotUndo:`이 작업은 취소할 수 없습니다`,message:`프린터에서 "{{name}}"을(를) 삭제하시겠습니까?`},bulkDelete:{title:`프로필 삭제`,cannotUndo:`이 작업은 취소할 수 없습니다`,message:`프린터에서 선택한 {{count}}개 프로필을 삭제하시겠습니까?`},toast:{profileSaved:`K-프로필 저장됨`,profilesSaved:`{{count}}개 압출기에 K-프로필 저장됨`,selectAtLeastOneExtruder:`적어도 하나의 압출기를 선택해 주세요`,selectFilament:`먼저 필라먼트를 선택하세요`,filamentNotResolvable:`{{name}}에 해당하는 Bambu 필라먼트 ID가 없어 프린터가 프로파일을 저장할 수 없습니다`,profileDeleted:`K-프로필 삭제됨`,profilesDeleted:`{{count}}개 프로필 삭제됨`,exportedProfiles:`{{count}}개 프로필 내보냄`,importedProfiles:`{{total}}개 중 {{count}}개 프로필 가져옴`,noProfilesToExport:`내보낼 프로필 없음`,invalidFileFormat:`유효하지 않은 파일 형식`,failedToParseImport:`가져오기 파일 파싱 실패`,failedToSaveBatch:`K-프로필 저장 실패`,noteSaved:`메모 저장됨`,failedToSaveNote:`메모 저장 실패`},permission:{noRead:`프로필 새로고침 권한이 없습니다`,noCreate:`프로필 추가 권한이 없습니다`,noUpdate:`K-프로필 업데이트 권한이 없습니다`,noDelete:`K-프로필 삭제 권한이 없습니다`,noExport:`프로필 내보내기 권한이 없습니다`,noImport:`프로필 가져오기 권한이 없습니다`}},virtualPrinter:{title:`가상 프린터`,running:`실행 중`,stopped:`중지됨`,description:{default:`Bambu Studio 및 OrcaSlicer에 표시되는 가상 프린터를 활성화합니다. 이 프린터로 전송된 파일은 인쇄 없이 바로 아카이브됩니다.`,proxy:`실제 프린터로 슬라이서 트래픽을 릴레이하는 프록시를 활성화하여 모든 네트워크에서 원격 인쇄가 가능합니다.`},enable:{title:`가상 프린터 활성화`,visibleInSlicer:`슬라이서 검색에서 "Bambuddy"로 표시됨`,proxyingTo:`{{name}}으로 프록시 중`,notActive:`활성화되지 않음`},model:{title:`프린터 모델`,description:`에뮬레이션할 프린터 모델을 선택하세요.`,restartWarning:`모델 변경 시 가상 프린터가 재시작됩니다`},accessCode:{title:`액세스 코드`,isSet:`액세스 코드가 설정됨`,notSet:`액세스 코드가 설정되지 않음 - 활성화하려면 필요`,placeholder:`8자리 코드 입력`,placeholderChange:`변경하려면 새 코드 입력`,hint:`정확히 8자여야 합니다. 슬라이서가 인증하는 데 사용됩니다.`,charCount:`({{count}}/8)`,inheritedFromTarget:`대상 프린터에서 상속됨`,derivedFromTargetHint:`대상 프린터의 액세스 코드를 사용합니다. 브리지는 슬라이서 인증을 실제 프린터로 전달하므로 코드가 일치해야 합니다 — 변경하려면 프린터 설정에서 액세스 코드를 편집하세요.`,reveal:`액세스 코드 표시`,hide:`액세스 코드 숨기기`},targetPrinter:{title:`대상 프린터`,configured:`프록시 대상 구성됨`,notConfigured:`대상 프린터가 선택되지 않음 - 프록시 모드에 필요`,placeholder:`프린터 선택...`,hint:`슬라이서 트래픽을 프록시할 프린터를 선택하세요. 프린터는 LAN 모드여야 합니다.`,noPrinters:`구성된 프린터 없음. 프록시 모드를 사용하려면 먼저 프린터를 추가하세요.`},remoteInterface:{title:`네트워크 인터페이스 재정의`,configured:`인터페이스 재정의 활성`,optional:`선택사항 - 자동 감지된 IP가 잘못된 경우 사용 (예: 여러 NIC, Docker, VPN)`,placeholder:`자동 감지 (기본값)...`,hint:`SSDP를 통해 광고되고 TLS 인증서에 사용되는 IP 주소를 재정의합니다. Bambuddy에 여러 네트워크 인터페이스가 있을 때 유용합니다.`},mode:{title:`모드`,archive:`아카이브`,archiveDesc:`파일 즉시 아카이브`,review:`검토`,reviewDesc:`아카이브 전 검토`,queue:`대기열`,queueDesc:`아카이브 후 대기열 추가`,proxy:`프록시`,proxyDesc:`실제 프린터로 릴레이`},autoDispatch:{title:`자동 발송`,description:`대기열에 추가될 때 자동으로 인쇄를 시작합니다. 꺼져 있으면 수동 발송을 기다립니다.`},queueForceColorMatch:{title:`색상 일치 강제`,description:`정확한 필라멘트 유형과 색상이 장착되지 않은 프린터에는 발송을 거부합니다. 기본적으로 꺼져 있음 — 이 옵션 없이는 대기열이 모델 전용 매칭을 사용하여 잘못된 색상이 장착된 프린터를 선택할 수 있습니다.`},saveAmsMapping:{title:`AMS 매핑 저장`,description:`슬라이서가 직접 선택한 AMS 슬롯(project_file MQTT 명령에서)을 아카이브에 저장하여, 이후 재인쇄 시 파일의 유형/색상에서 다시 유추하지 않고 동일한 실물 스풀을 재사용하도록 합니다. 기본값은 꺼짐입니다.`},gcodeInjection:{title:`G-code 주입`,description:`설정에서 모델별로 구성한 G-code 스니펫을 이 가상 프린터의 작업에 적용합니다. 기본값은 꺼짐입니다.`},tailscaleDisabled:{title:`Tailscale 통합`,description:`이 가상 프린터가 Tailscale을 통해 노출되도록 표시하려면 활성화하세요. 슬라이서에 붙여넣을 IP를 알 수 있도록 호스트의 Tailscale 주소를 표시합니다. CA 가져오기 단계는 변경되지 않음 — 이 토글은 인증서에 영향을 미치지 않습니다.`},setupRequired:{title:`설정 필요`,description:`가상 프린터 기능이 작동하려면 추가 시스템 구성이 필요합니다. 여기에는 포트 포워딩, 방화벽 규칙 및 플랫폼별 설정이 포함됩니다.`,readGuide:`활성화 전에 설정 가이드를 읽으세요`},archiveNameSource:{title:`아카이브 이름 출처`,description:`가상 프린터를 통해 파일이 도착할 때 새 아카이브의 이름 지정 방법을 선택합니다. "메타데이터"는 3MF의 슬라이서 내장 제목을 사용합니다(기본값). "파일 이름"은 Bambu Studio가 FTP를 통해 전송한 파일 이름을 사용합니다. 참고: Bambu Studio는 3MF에 제목 필드가 있을 경우 "프린터로 보내기" 대화 상자에 입력한 이름을 해당 값으로 덮어쓰므로, 두 모드 모두 동일한 문자열이 표시되는 경우가 많습니다.`,metadata:`메타데이터`,filename:`파일 이름`},howItWorks:{title:`작동 방식`,step1:`같은 LAN에서 가상 프린터는 검색을 통해 슬라이서(Bambu Studio / OrcaSlicer)에 자동으로 나타납니다. 다른 네트워크에서는 IP 주소와 액세스 코드로 수동으로 추가하세요.`,step2:`아카이브, 검토, 대기열 모드에서 슬라이서의 "전송" 버튼을 사용하여 3MF 파일을 Bambuddy에 업로드하세요. 슬라이서는 "인쇄 성공"을 표시하지만 파일은 저장되고 인쇄되지 않습니다.`,step3:`프록시 모드에서 가상 프린터는 모든 트래픽을 실제 프린터로 릴레이합니다 — 직접 연결된 것처럼 즉시 인쇄가 시작됩니다.`},status:{title:`상태 세부 정보`,printerName:`프린터 이름`,model:`모델`,serialNumber:`일련 번호`,mode:`모드`,pendingFiles:`대기 중인 파일`,targetPrinter:`대상 프린터`,ftpPort:`FTP 포트`,mqttPort:`MQTT 포트`,ftpConnections:`FTP 연결`,mqttConnections:`MQTT 연결`},toast:{updated:`가상 프린터 설정 업데이트됨`,failedToUpdate:`설정 업데이트 실패`,copyFailed:`복사 실패 — 텍스트를 수동으로 선택하여 복사해 보세요`,accessCodeRequired:`먼저 액세스 코드를 설정해 주세요`,targetPrinterRequired:`먼저 대상 프린터를 선택해 주세요`,bindIpRequired:`먼저 바인드 IP를 설정해 주세요`,accessCodeEmpty:`액세스 코드는 비워둘 수 없습니다`,accessCodeLength:`액세스 코드는 정확히 8자여야 합니다`,targetCodeChangedRebind:`액세스 코드가 새 대상 프린터에 동기화되었습니다. 새 코드를 적용하려면 슬라이서에서 이 장치를 다시 추가하세요.`,created:`가상 프린터 생성됨`,failedToCreate:`가상 프린터 생성 실패`,deleted:`가상 프린터 삭제됨`,failedToDelete:`가상 프린터 삭제 실패`},list:{title:`가상 프린터`,add:`추가`,addFirst:`가상 프린터 추가`,empty:`구성된 가상 프린터 없음. 하나를 추가하여 시작하세요.`},bindIp:{title:`바인드 인터페이스`,placeholder:`인터페이스 선택...`,hint:`이 가상 프린터가 바인딩할 네트워크 인터페이스. 프린터당 고유해야 합니다.`},proxy:{accessCodeHint:`프록시 모드에서는 슬라이서에서 대상 프린터의 액세스 코드를 사용하세요. 연결은 실제 프린터로 투명하게 전달됩니다.`},addDialog:{title:`가상 프린터 추가`,name:`이름`,hint:`생성 후 액세스 코드, 대상 프린터 및 기타 설정을 구성할 수 있습니다.`,create:`생성`},deleteConfirm:{title:`가상 프린터 삭제`,message:`"{{name}}"을(를) 삭제하시겠습니까? 이 프린터의 모든 서비스가 중지됩니다.`},caCert:{title:`슬라이서 인증서`,description:`가상 프린터는 Bambuddy CA가 서명한 TLS 인증서를 사용합니다. 이 CA 인증서를 슬라이서의 신뢰 저장소에 한 번만 가져오면 연결을 수락합니다 — 명령줄에서 복사할 필요가 없습니다.`,copy:`복사`,copied:`복사됨`,download:`다운로드`,fingerprint:`SHA-256`}},modelViewer:{openInSlicer:`슬라이서에서 열기`,openInSlicerWith:`{{slicer}}에서 열기`,moreSlicerOptions:`슬라이서 옵션 더 보기`,openInSlicerFailed:`슬라이서에서 열 수 없습니다`,tabs:{model:`3D 모델`},notAvailable:`사용 불가`,plates:`플레이트`,allPlates:`모든 플레이트`,plateNumber:`플레이트 {{number}}`,plateCount:`플레이트 {{count}}개`,plateCount_other:`플레이트 {{count}}개`,objectCount:`개체 {{count}}개`,objectCount_other:`개체 {{count}}개`,filamentCount:`필라멘트 {{count}}개`,filamentCount_other:`필라멘트 {{count}}개`,eta:`예상 {{minutes}}분`,noPreview:`이 파일에 대한 미리보기를 사용할 수 없습니다`,pagination:{pageOf:`{{total}}페이지 중 {{current}}`,prev:`이전`,next:`다음`},errors:{failedToLoad:`파일 불러오기 실패`,noMeshes:`3MF 파일에서 메쉬를 찾을 수 없음`,unsupportedFormat:`지원되지 않는 파일 형식`}},maintenanceDescriptions:{lubricateCarbonRods:`부드러운 움직임을 위해 카본 로드에 윤활유 도포`,lubricateRails:`부드러운 움직임을 위해 선형 레일에 윤활유 도포`,cleanNozzle:`막힘 방지를 위해 핫엔드와 노즐 청소`,checkBelts:`정확한 인쇄를 위해 벨트 장력 확인`,cleanBuildPlate:`접착력 향상을 위해 빌드 플레이트 청소`,checkExtruder:`마모 여부 확인을 위해 압출기 기어 점검`,checkCooling:`냉각 팬이 제대로 작동하는지 확인`,generalInspection:`전반적인 프린터 점검`,cleanCarbonRods:`마찰 감소를 위해 카본 로드 청소`,lubricateSteelRods:`부드러운 움직임을 위해 스틸 로드에 윤활유 도포`,cleanSteelRods:`마찰 감소를 위해 스틸 로드 청소`,cleanLinearRails:`먼지와 이물질 제거를 위해 선형 레일 닦기`,checkPtfeTube:`마모 또는 손상 여부 확인을 위해 PTFE 튜브 점검`,replaceHepaFilter:`공기 품질을 위해 HEPA 필터 교체`,replaceCarbonFilter:`활성탄 필터 교체`,lubricateLeftNozzleRail:`왼쪽 노즐 레일 윤활 (H2 시리즈)`},haSensors:{label:`센서`,unavailable:`사용 불가`,blocksPrints:`{{entity}} — 경고 중에는 인쇄를 보류합니다`,states:{open:`열림`,closed:`닫힘`,unlocked:`잠금 해제`,locked:`잠김`,detected:`감지됨`,clear:`없음`,wet:`젖음`,dry:`건조`,problem:`문제`,ok:`정상`,running:`작동 중`,stopped:`정지`,on:`켜짐`,off:`꺼짐`},sectionTitle:`Home Assistant 센서 (프린터)`,add:`센서 추가`,addTitle:`Home Assistant 센서 추가`,editTitle:`Home Assistant 센서 편집`,empty:`아직 센서가 없습니다. Home Assistant의 도어 센서나 온도계를 연결하면 프린터 카드에 표시됩니다.`,unknownPrinter:`알 수 없는 프린터`,badgeBlocks:`인쇄 보류`,badgeNotifies:`알림`,badgeHidden:`카드에서 숨김`,printer:`프린터`,entity:`엔터티`,searchPlaceholder:`엔터티 검색...`,noEntities:`일치하는 엔터티 없음`,name:`표시 이름`,alertWhen:`경고 조건`,alertNever:`없음 — 표시만`,alertAbove:`초과`,alertBelow:`미만`,alertHint:`경고 상태가 되면 프린터 카드에서 강조되고 아래 옵션이 활성화됩니다.`,showOnCard:`프린터 카드에 표시`,notifyOnAlert:`경고가 시작되면 알림 보내기`,blockPrint:`경고 중에는 대기 중인 인쇄를 보류`,blockPrintHint:`작업은 대기열에 남아 있다가 센서가 해제되면 자동으로 시작됩니다. Home Assistant에 연결할 수 없는 동안에는 무시됩니다.`,toast:{created:`센서를 추가했습니다`,updated:`센서를 저장했습니다`,deleted:`센서를 삭제했습니다`},error:{pickEntity:`Home Assistant 엔터티를 선택하세요`,nameRequired:`표시 이름을 입력하세요`,printerRequired:`프린터를 선택하세요`,alertRequired:`먼저 경고 조건을 설정하세요`}},locationHaSensors:{sectionTitle:`Home Assistant 센서 (보관 위치)`,sectionDescription:`Home Assistant의 온도, 습도, 배터리 센서를 보관 위치에 연결하면 필라멘트 카드와 표에 실시간 값이 표시됩니다. 위치당 카테고리별로 센서를 하나만 등록할 수 있습니다.`,add:`센서 추가`,addTitle:`Home Assistant 센서 추가`,editTitle:`Home Assistant 센서 편집`,empty:`아직 센서가 없습니다. Home Assistant의 온도나 습도 센서를 연결하면 필라멘트 카드에 표시됩니다.`,unknownLocation:`알 수 없는 위치`,location:`보관 위치`,showOnCard:`필라멘트 카드에 표시`,overwriteConfirm:{title:`기존 센서를 교체하시겠습니까?`,messageTemperature:`"{{location}}"에는 이미 연결된 온도 센서가 있습니다: {{name}}. 계속하면 교체됩니다.`,messageHumidity:`"{{location}}"에는 이미 연결된 습도 센서가 있습니다: {{name}}. 계속하면 교체됩니다.`,messageBattery:`"{{location}}"에는 이미 연결된 배터리 센서가 있습니다: {{name}}. 계속하면 교체됩니다.`},autoAdd:{confirmTitle:`다른 센서도 추가할까요?`,confirmMessage:`Bambuddy가 이 위치의 다른 센서도 찾았습니다. 추가할 항목을 선택하세요.`,added:`다음도 추가됨: {{names}}`,noneFound:`이 위치에 일치하는 온도, 습도 또는 배터리 센서를 찾을 수 없습니다.`,onlyThisOne:`이것만`},options:{buttonLabel:`센서 옵션`,title:`위치 센서 옵션`,description:`이 값은 위치의 첫 번째 센서와 함께 온도, 습도 또는 배터리 센서가 자동으로 연결될 때 사용됩니다.`,generalSettings:`일반 설정`,pollInterval:`업데이트 간격(초)`,pollIntervalHint:`Bambuddy가 Home Assistant를 폴링하여 화면의 센서 값을 갱신하는 주기입니다. 최소 60초.`,colorizeValues:`경보 임계값에 따라 센서 값에 색상 표시`,aboveColor:`임계값 초과 색상`,belowColor:`임계값 미만 색상`,optimalColor:`최적값 색상`,colors:{red:`빨강`,orange:`주황`,yellow:`노랑`,green:`초록`,blue:`파랑`,purple:`보라`,pink:`분홍`},saved:`옵션이 저장되었습니다`,saveFailed:`옵션 저장에 실패했습니다`,reset:`초기화`,resetConfirm:{title:`기존 위치 센서를 모두 재설정하시겠습니까?`,message:`위에서 설정한 값으로 기존의 모든 보관 위치 온도, 습도, 배터리 센서의 경보 임계값, 알림, 카드 표시 여부를 덮어쓰고, 각 센서의 이름을 Home Assistant의 친숙한 이름으로 복원합니다. 프린터 센서는 영향을 받지 않습니다. 이 작업은 되돌릴 수 없습니다. 센서 수에 따라 시간이 다소 걸릴 수 있습니다.`},resetDone:`{{count}}개의 위치 센서에 적용되었습니다`,resetFailed:`위치 센서 재설정에 실패했습니다`},deleteAllConfirm:{title:`모든 센서를 삭제하시겠습니까?`,message:`"{{location}}"에 연결된 모든 센서({{count}}개)가 삭제됩니다. 이 작업은 되돌릴 수 없습니다.`},currentlyBound:`현재 연결됨: {{entity}}`,error:{locationRequired:`보관 위치를 선택하세요`},toast:{created:`센서를 추가했습니다`,updated:`센서를 저장했습니다`,deleted:`센서를 삭제했습니다`}},smartPlugs:{offline:`오프라인`,admin:`관리자`,openPlugAdminPage:`플러그 관리 페이지 열기`,deleteSmartPlug:`스마트 플러그 삭제`,turnOnSmartPlug:`스마트 플러그 켜기`,turnOffSmartPlug:`스마트 플러그 끄기`,turnOn:`켜기`,turnOff:`끄기`,addSmartPlug:{scanningNetwork:`네트워크 스캔 중...`,chooseEntity:`엔티티 선택...`,connectionFailed:`연결 실패`,searchEntities:`엔티티 검색...`,searchPowerSensors:`전력 센서 검색...`,searchEnergySensors:`에너지 센서 검색...`,placeholders:{plugName:`거실 플러그`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`전력 토픽과 같거나 다름`}},linkedTo:`연결됨:`,monitorOnly:`모니터만`,alerts:`알림`,scheduleOn:`켜기 {{time}}`,scheduleOff:`끄기 {{time}}`,on:`켜짐`,off:`꺼짐`,power:`전력`,kwhToday:`오늘 kWh`,settings:`설정`,automationSettings:`자동화 설정`,showInSwitchbar:`스위치바에 표시`,quickAccessSidebar:`사이드바에서 빠른 접근`,enabled:`활성화됨`,enableAutomation:`이 플러그의 자동화 활성화`,autoOn:`자동 켜기`,autoOnDescription:`인쇄 시작 시 켜기`,autoOff:`자동 끄기`,autoOffDescription:`인쇄 완료 시 끄기 (1회)`,autoOffPersistent:`계속 활성화`,autoOffPersistentDescription:`1회성 대신 인쇄 사이에 활성화 유지`,controlsPrinterPower:`프린터에 전원 공급`,controlsPrinterPowerDescription:`이 플러그가 액세서리(필터 팬, 조명)에만 전원을 공급한다면 끄세요. 그렇지 않으면 플러그를 끌 때 프린터가 오프라인으로 표시됩니다.`,turnOffDelayMode:`끄기 지연 모드`,time:`시간`,temp:`온도`,delayMinutes:`지연 (분)`,tempThreshold:`온도 임계값 (°C)`,tempThresholdDescription:`노즐이 이 온도 이하로 냉각될 때 끄기`,edit:`편집`,deleteConfirm:`"{{name}}"을(를) 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.`,turnOnConfirm:`"{{name}}"을(를) 켜시겠습니까?`,turnOffConfirm:`"{{name}}"을(를) 끄시겠습니까? 연결된 장치의 전원이 차단됩니다.`,failedToTurn:`"{{name}}" {{action}} 실패`,unknown:`알 수 없음`,addTitle:`스마트 플러그 추가`,editTitle:`스마트 플러그 편집`,stopScanning:`스캔 중지`,discoverTasmota:`Tasmota 장치 검색`,foundDevices:`{{count}}개 장치 발견 - 클릭하여 선택:`,noDevicesFound:`네트워크에서 Tasmota 장치를 찾을 수 없음`,haNotConfigured:`Home Assistant가 구성되지 않았습니다.`,haSettingsPath:`설정 → 네트워크 → Home Assistant`,selectEntity:`엔티티 선택 *`,ipAddress:`IP 주소 *`,nameLabel:`이름 *`,username:`사용자 이름`,password:`비밀번호`,authHint:`Tasmota 장치에 인증이 필요하지 않으면 비워두세요`,linkToPrinter:`프린터에 연결`,noPrinter:`프린터 없음 (수동 제어만)`,linkingDescription:`연결하면 인쇄 시작/완료 시 자동 켜기/끄기가 활성화됩니다`,powerAlerts:`전력 알림`,alertAbove:`초과 시 알림 (W)`,alertBelow:`미만 시 알림 (W)`,alertDescription:`전력 소비가 이 임계값을 초과할 때 알림 받기. 해당 방향을 비활성화하려면 비워두세요.`,dailySchedule:`일일 스케줄`,turnOnAt:`켜기 시각`,turnOffAt:`끄기 시각`,scheduleDescription:`매일 이 시간에 자동으로 켜기/끄기. 해당 동작을 건너뛰려면 비워두세요.`,showOnPrinterCard:`프린터 카드에 표시`,displayOnPrinterCard:`프린터 카드에 버튼 표시`,connectedResult:`연결됨!`,deviceLabel:`장치: {{name}} - `,stateLabel:`상태: {{state}}`,test:`테스트`,delete:`삭제`,save:`저장`,add:`추가`,cancel:`취소`,failedToStartScan:`스캔 시작 실패`,nameRequired:`이름이 필요합니다`,entityRequired:`Home Assistant 플러그에는 엔티티가 필요합니다`,mqttTopicRequired:`전력, 에너지 또는 상태 모니터링을 위한 MQTT 토픽이 하나 이상 구성되어야 합니다`,loadingEntities:`엔티티 불러오는 중...`,loading:`불러오는 중...`,failedToLoadEntities:`엔티티 불러오기 실패: {{error}}`,noEntitiesMatching:`"{{search}}"과 일치하는 엔티티를 찾을 수 없음`,noEntitiesAvailable:`사용 가능한 엔티티 없음`,searchingEntities:`모든 엔티티 검색 중 ({{count}}개 발견)`,showingEntities:`switch, light, input_boolean 표시 중 ({{count}}개 사용 가능)`,energyMonitoringOptional:`에너지 모니터링 (선택사항)`,energyMonitoringHint:`전력/에너지 데이터를 제공하는 센서를 검색하여 선택하세요.`,powerSensorW:`전력 센서 (W)`,energyTodayKwh:`오늘 에너지 (kWh)`,totalEnergyKwh:`총 에너지 (kWh)`,noMatchingSensors:`일치하는 센서 없음`,none:`없음`,mqttNotConfigured:`MQTT 브로커가 구성되지 않았습니다.`,mqttSettingsPath:`설정 → 네트워크 → MQTT 게시`,mqttNotConfiguredSuffix:`(게시를 활성화할 필요는 없고 브로커 세부 정보만 입력하면 됩니다).`,mqttMonitorOnlyDescription:`MQTT 플러그는 MQTT 구독을 통해 전력/에너지 데이터를 받습니다. 켜기/끄기 제어는 불가능 — MQTT 브로커나 홈 자동화 시스템을 사용하세요.`,powerMonitoring:`전력 모니터링`,energyMonitoring:`에너지 모니터링`,stateMonitoring:`상태 모니터링`,optional:`선택사항`,topic:`토픽`,jsonPath:`JSON 경로`,multiplier:`배수`,onValue:`ON 값`,mqttPowerHint:`JSON 경로는 JSON 페이로드에서 값을 추출합니다 (예: "power_l1"). 토픽이 원시 숫자 값을 게시하면 비워두세요.
+AAN-waarde: de exacte tekenreeks die "AAN" betekent. Laat leeg voor automatische detectie (ON, true, 1).`,restControl:`Bedienen`,restOnUrl:`URL voor AAN`,restOffUrl:`URL voor UIT`,restOnBody:`Requestbody AAN`,restOffBody:`Requestbody UIT`,restMethod:`HTTP-methode`,restHeaders:`Aangepaste headers (JSON)`,restStatusUrl:`Status-URL`,restStatusPath:`JSON-pad status`,restStatusOnValue:`AAN-waarde`,restPowerUrl:`Vermogens-URL`,restPowerPath:`JSON-pad vermogen`,restPowerMultiplier:`Vermenigvuldigingsfactor vermogen`,restEnergyUrl:`Energie-URL`,restEnergyPath:`JSON-pad energie (vandaag)`,restEnergyTotalPath:`JSON-pad energie (totaal)`,restEnergyTotalMultiplier:`Vermenigvuldigingsfactor totaal`,restEnergyTotalPathHint:`bijv. aenergy.total`,restEnergyTotalHint:`Veel stekkers — waaronder alle Shelly's — rapporteren alleen een totale teller die nooit wordt gereset. Die hoort hier en niet in het veld hierboven: als je hem als verbruik van vandaag leest, wordt hij om middernacht niet gereset en blijven Gisteren en Totaal leeg. Bambuddy berekent Vandaag en Gisteren hieruit; het duurt één of twee dagen aan metingen voordat die gevuld zijn. Een Shelly rapporteert wattuur, dus gebruik een vermenigvuldigingsfactor van 0.001.`,restEnergyMultiplier:`Vermenigvuldigingsfactor energie`,restUrlRequired:`Ten minste één URL (AAN of UIT) is vereist voor REST-stekkers`,restHeadersHint:`bijv. {"Authorization": "Bearer your-token"}`,restBodyHint:`bijv. ON, {"state": "on"}`,restStatusHint:`URL om de huidige status op te vragen`,restPathHint:`bijv. state of data.power.status`,restPowerUrlHint:`Afzonderlijke URL voor vermogensgegevens (gebruikt Status-URL als deze leeg is)`,restEnergyUrlHint:`Afzonderlijke URL voor energiegegevens (gebruikt Status-URL als deze leeg is)`,restEnergyHint:`Elke waarde kan een eigen URL gebruiken of terugvallen op de Status-URL. Gebruik vermenigvuldigingsfactoren voor eenheidsconversie (bijv. 0.001 om Wh naar kWh om te rekenen).`,testConnection:`Verbinding testen`,connectionSuccess:`Verbinding geslaagd`,noSwitchesInSwitchbar:`Geen schakelaars in de schakelbalk`,enableSwitchbarHint:`Schakel "Tonen in schakelbalk" in via Instellingen > Slimme stekkers`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`E-mail`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`SMTP-e-mailmeldingen`,telegram:`Meldingen via Telegram-bot`,discord:`Versturen naar Discord-kanaal via webhook`,ntfy:`Gratis, zelf te hosten pushmeldingen`,pushover:`Eenvoudige, betrouwbare pushmeldingen`,callmebot:`Gratis WhatsApp-meldingen via CallMeBot`,webhook:`Algemene HTTP POST naar elke URL`,homeassistant:`Blijvende meldingen in het Home Assistant-dashboard`,bark:`iOS-pushmeldingen via Bark (zelf te hosten)`},lastSuccess:`Laatste: {{date}}`,error:`Fout`,printer:`Printer:`,allPrinters:`Alle printers`,sendTestNotification:`Testmelding verzenden`,eventSettings:`Gebeurtenisinstellingen`,enabled:`Ingeschakeld`,sendFromProvider:`Meldingen via deze provider verzenden`,printEvents:`Afdrukgebeurtenissen`,printerStatus:`Printerstatus`,amsAlarms:`AMS-alarmen`,amsHtAlarms:`AMS-HT-alarmen`,printQueue:`Afdrukwachtrij`,start:`Start`,plateCheck:`Plaatcontrole`,complete:`Voltooid`,failed:`Mislukt`,stopped:`Gestopt`,progress:`Voortgang`,offline:`Offline`,lowFilament:`Weinig filament`,maintenance:`Onderhoud`,amsHumidity:`AMS-luchtvochtigheid`,amsTemp:`AMS-temp`,amsDryingSuspended:`Drogen onderbroken`,amsHtHumidity:`AMS-HT-luchtvochtigheid`,amsHtTemp:`AMS-HT-temp`,bedCooled:`Bed afgekoeld`,firstLayer:`Eerste laag`,quiet:`Stil`,digest:`Samenvatting {{time}}`,printStarted:`Afdruk gestart`,plateNotEmpty:`Plaat niet leeg`,plateNotEmptyDescription:`Objecten gedetecteerd vóór afdrukken`,plateClearRequired:`Bevestiging lege plaat vereist`,plateClearRequiredDescription:`Afdruk voltooid, wachtrij wacht op bevestiging van de plaat`,plateClear:`Plaat leeg`,printCompleted:`Afdruk voltooid`,bedCooledLabel:`Bed afgekoeld`,bedCooledDescription:`Bed na afdruk afgekoeld tot onder drempel`,firstLayerCompleteLabel:`Eerste laag voltooid`,firstLayerCompleteDescription:`Melden met momentopname wanneer de eerste laag is voltooid`,missingSpoolAssignmentLabel:`Ontbrekende spoeltoewijzing`,billingChargeFailedLabel:`Kostenregistratie mislukt`,billingChargeFailedDescription:`Melden wanneer afdrukkosten niet konden worden geregistreerd`,missingSpoolAssignmentDescription:`Melden wanneer een afdruk start en vereiste trays geen toegewezen spoel hebben`,printFailed:`Afdruk mislukt`,printStopped:`Afdruk gestopt`,progressMilestones:`Voortgangsmijlpalen`,progressMilestonesDescription:`Melden bij 25%, 50%, 75%`,printerOffline:`Printer offline`,printerError:`Printerfout`,aiFailureDetection:`AI-foutdetectie`,aiFailureDetectionDescription:`Melden wanneer Obico AI een mogelijke afdrukfout detecteert`,lowFilamentLabel:`Weinig filament`,maintenanceDue:`Onderhoud nodig`,maintenanceDueDescription:`Melden wanneer onderhoud nodig is`,amsHumidityHigh:`AMS-luchtvochtigheid hoog`,amsHumidityHighDescription:`Luchtvochtigheid van normale AMS overschrijdt drempel`,amsTemperatureHigh:`AMS-temperatuur hoog`,amsTemperatureHighDescription:`Temperatuur van normale AMS overschrijdt drempel`,amsDryingSuspendedTitle:`Automatisch drogen gestopt`,amsDryingSuspendedDescription:`Automatisch drogen heeft een AMS-eenheid opgegeven omdat de luchtvochtigheid niet onder de drempel kwam`,amsHtHumidityHigh:`AMS-HT-luchtvochtigheid hoog`,amsHtHumidityHighDescription:`AMS-HT-luchtvochtigheid overschrijdt drempel`,amsHtTemperatureHigh:`AMS-HT-temperatuur hoog`,amsHtTemperatureHighDescription:`AMS-HT-temperatuur overschrijdt drempel`,inventoryAlerts:`Voorraadwaarschuwingen`,stockReorderAlert:`Bestelwaarschuwing`,stockReorderAlertDescription:`SKU heeft het bestelpunt bereikt`,stockBreakAlert:`Voorraadtekortwaarschuwing`,stockBreakAlertDescription:`Voorraad raakt op voordat aanvulling arriveert`,jobAdded:`Taak toegevoegd`,jobAddedDescription:`Taak toegevoegd aan wachtrij`,jobAssigned:`Taak toegewezen`,jobAssignedDescription:`Modelgebaseerde taak toegewezen aan printer`,jobStarted:`Taak gestart`,jobStartedDescription:`Wachtrijtaak begonnen met afdrukken`,jobWaiting:`Taak wacht`,jobWaitingDescription:`Taak wacht op filament of printer`,jobSkipped:`Taak overgeslagen`,jobSkippedDescription:`Taak overgeslagen (vorige mislukt)`,jobFailed:`Taak mislukt`,jobFailedDescription:`Taak kon niet starten`,queueComplete:`Wachtrij voltooid`,queueCompleteDescription:`Alle wachtrijtaken voltooid`,quietHours:`Stille uren`,noNotificationsDuring:`Geen meldingen tijdens deze uren`,editProviderToChangeQuietHours:`Bewerk provider om stille uren te wijzigen`,dailyDigest:`Dagelijkse samenvatting`,batchNotifications:`Bundel meldingen in één dagelijkse samenvatting`,sendAt:`Verzenden om {{time}}`,editProviderToChangeDigestTime:`Bewerk provider om tijdstip van samenvatting te wijzigen`,edit:`Bewerken`,deleteProvider:`Meldingsprovider verwijderen`,deleteConfirm:`Weet je zeker dat je "{{name}}" wilt verwijderen? Dit kan niet ongedaan worden gemaakt.`,delete:`Verwijderen`,addTitle:`Meldingsprovider toevoegen`,editTitle:`Meldingsprovider bewerken`,nameLabel:`Naam *`,namePlaceholder:`Mijn meldingen`,providerTypeLabel:`Providertype *`,configuration:`Configuratie`,testConfiguration:`Configuratie testen`,printerFilter:`Printerfilter`,onlyFromPrinter:`Alleen meldingen verzenden voor gebeurtenissen van deze printer`,quietHoursDnd:`Stille uren (Niet storen)`,quietStart:`Start`,quietEnd:`Einde`,dailyDigestLabel:`Dagelijkse samenvatting`,sendDigestAt:`Samenvatting verzenden om`,digestCollected:`Gebeurtenissen worden verzameld en op dit tijdstip als één samenvatting verzonden`,notificationEvents:`Meldingsgebeurtenissen`,progressPercent:`(25%, 50%, 75%)`,bedCooledAfterPrint:`(nadat de afdruk is voltooid)`,haSensorAlert:`Sensorwaarschuwing`,haSensorAlertDescription:`(een gekoppelde Home Assistant-sensor vereist aandacht)`,locationHaSensorAlert:`Sensoralarm opslaglocatie`,locationHaSensorAlertDescription:`(een Home Assistant-sensor die aan een opslaglocatie is gekoppeld vereist aandacht)`,eventPriority:{sectionTitle:`ntfy-prioriteit`,helpNtfy:`Kies een prioriteit voor elke ingeschakelde gebeurtenis. ntfy gebruikt deze om waarschuwingen op te schalen (geluid, zichtbaarheid, pushgedrag). Niveaus die hier niet zijn ingesteld gebruiken de standaardwaarde van de ntfy-server.`,min:`Min`,low:`Laag`,default:`Standaard`,high:`Hoog`,urgent:`Urgent`},cancel:`Annuleren`,save:`Opslaan`,add:`Toevoegen`,nameRequired:`Naam is verplicht`,fieldRequired:`{{field}} is verplicht`,haDataInvalid:`Het veld Data moet een geldig JSON-object zijn, bijv. {"priority": "high", "ttl": 0}`,phoneNumber:`Telefoonnummer`,apiKey:`API-sleutel`,serverUrl:`Server-URL`,topic:`Topic`,authToken:`Authenticatietoken`,userKey:`Gebruikerssleutel`,appToken:`App-token`,priority:`Prioriteit`,pushoverRetry:`Noodherhaling (s)`,pushoverExpire:`Noodverval (s)`,botToken:`Bottoken`,chatId:`Chat-ID`,telegramThreadId:`Forumtopic-ID`,telegramThreadIdHelp:`Optioneel. Plaatst in één specifiek topic van een forumgroep — het laatste nummer in de topiclink (t.me/c/.../25). Laat leeg voor het algemene topic.`,telegramThreadIdInvalid:`Forumtopic-ID moet een getal zijn.`,smtpServer:`SMTP-server`,smtpPort:`SMTP-poort`,security:`Beveiliging`,authentication:`Authenticatie`,username:`Gebruikersnaam`,password:`Wachtwoord`,fromEmail:`Afzender-e-mail`,toEmail:`Naar e-mailadres`,webhookUrl:`Webhook-URL`,payloadFormat:`Payloadformaat`,authorization:`Autorisatie`,titleFieldName:`Naam titelveld`,messageFieldName:`Naam berichtveld`,editTemplate:`Sjabloon bewerken: {{name}}`,titleLabel:`Titel`,bodyLabel:`Inhoud`,titlePlaceholder:`Meldingstitel...`,bodyPlaceholder:`Meldingsinhoud...`,availableVariables:`Beschikbare variabelen`,clickToInsert:`Klik om op de cursorpositie in de inhoud in te voegen`,livePreview:`Livevoorbeeld`,hide:`Verbergen`,show:`Tonen`,loadingPreview:`Voorbeeld laden...`,enterTemplateContent:`Voer sjablooninhoud in om een voorbeeld te zien`,titlePreview:`Titel:`,bodyPreview:`Inhoud:`,resetToDefault:`Terugzetten naar standaard`,titleRequired:`Titel is verplicht`,bodyRequired:`Inhoud is verplicht`,notificationLog:`Meldingslogboek`,showFailedOnly:`Alleen mislukt`,last24Hours:`Laatste 24 uur`,last7Days:`Laatste 7 dagen`,last30Days:`Laatste 30 dagen`,last90Days:`Laatste 90 dagen`,justNow:`Zojuist`,noFailedNotifications:`Geen mislukte meldingen`,noNotificationsLogged:`Geen meldingen geregistreerd`,unknownProvider:`Onbekende provider`,logTitle:`Titel`,logMessage:`Bericht`,logError:`Fout`,logProvider:`Provider: {{type}}`,logTime:`Tijd: {{time}}`,refresh:`Vernieuwen`,clearOld:`Oude wissen`,statsSummary:`Laatste {{days}} dagen:`,statsNotifications:`meldingen`,statsSent:`{{count}} verzonden`,statsFailed:`{{count}} mislukt`,eventTypes:{print_start:`Afdruk gestart`,print_complete:`Afdruk voltooid`,print_failed:`Afdruk mislukt`,print_stopped:`Afdruk gestopt`,print_progress:`Voortgang`,printer_offline:`Printer offline`,printer_error:`Printerfout`,filament_low:`Weinig filament`,maintenance_due:`Onderhoud nodig`,test:`Testen`},userEmail:{title:`Meldingen`,emailNotifications:`E-mailmeldingen`,emailNotificationsDesc:`Ontvang e-mailmeldingen voor je eigen afdruktaken. E-mails worden verzonden via de SMTP-instellingen van het systeem die zijn geconfigureerd onder Geavanceerde authenticatie.`,sendingTo:`Meldingen worden verzonden naar`,noEmailWarning:`Je account heeft geen e-mailadres. Neem contact op met een beheerder om er een toe te voegen.`,printJobNotifications:`Meldingen voor afdruktaken`,printJobNotificationsDesc:`Kies welke gebeurtenissen e-mailmeldingen activeren voor afdruktaken die je indient.`,printJobStarts:`Afdruktaak start`,printJobStartsDesc:`Ontvang een melding wanneer je afdruktaak begint.`,printJobFinishes:`Afdruktaak voltooid`,printJobFinishesDesc:`Ontvang een melding wanneer je afdruktaak succesvol is voltooid.`,printErrors:`Afdrukfouten`,printErrorsDesc:`Ontvang een melding wanneer je afdruktaak mislukt of een fout tegenkomt.`,printJobStops:`Afdruktaak gestopt`,printJobStopsDesc:`Ontvang een melding wanneer je afdruktaak wordt geannuleerd of gestopt.`,saveSuccess:`Meldingsvoorkeuren opgeslagen.`,saveError:`Meldingsvoorkeuren opslaan mislukt.`}},richTextEditor:{bold:`Vet`,italic:`Cursief`,underline:`Onderstrepen`,bulletList:`Opsomming`,numberedList:`Genummerde lijst`,alignLeft:`Links uitlijnen`,alignCenter:`Centreren`,alignRight:`Rechts uitlijnen`,addLink:`Link toevoegen`,removeLink:`Link verwijderen`},externalLinks:{title:`Zijbalklinks`,sidebarLayout:`Zijbalk`,sidebarLayoutDescription:`Toon of verberg ingebouwde pagina's, voeg externe links toe en sleep items om de navigatie in de zijbalk te herschikken.`,systemPages:`Bambuddy-pagina's`,externalLinks:`Externe links`,visibleInSidebar:`Zichtbaar in zijbalk`,hiddenFromSidebar:`Verborgen in zijbalk`,requiredInSidebar:`Verplicht in zijbalk`,hidePage:`Pagina verbergen`,showPage:`Pagina tonen`,settingsCannotBeHidden:`Instellingen kunnen niet worden verborgen`,noLinksConfigured:`Geen externe links geconfigureerd`,deleteLink:`Link verwijderen`,removeCustomIcon:`Aangepast pictogram verwijderen`,openInNewTab:`Openen in nieuw tabblad`,placeholders:{linkName:`Mijn link`}},keyboardShortcuts:{title:`Sneltoetsen`,navigation:`Navigatie`,archivesSection:`Archieven`,kProfilesSection:`K-profielen`,generalSection:`Algemeen`,shortcuts:{goToPrinters:`Ga naar Printers`,goToArchives:`Ga naar Archieven`,goToQueue:`Ga naar Wachtrij`,goToStats:`Ga naar Statistieken`,goToProfiles:`Ga naar Cloudprofielen`,goToSettings:`Ga naar Instellingen`,focusSearch:`Zoeken activeren`,openUploadModal:`Uploadvenster openen`,clearSelection:`Selectie wissen / invoerveld verlaten`,contextMenu:`Contextmenu op kaarten`,refreshProfiles:`Profielen vernieuwen`,newProfile:`Nieuw profiel`,exitSelectionMode:`Selectiemodus afsluiten`,showHelp:`Deze hulp tonen`},footer:`Druk op Esc of klik buiten het venster om te sluiten`},notificationLog:{title:`Meldingslogboek`,events:{printStarted:`Afdruk gestart`,printComplete:`Afdruk voltooid`,printFailed:`Afdruk mislukt`,printStopped:`Afdruk gestopt`,progress:`Voortgang`,printerOffline:`Printer offline`,printerError:`Printerfout`,lowFilament:`Weinig filament`,maintenanceDue:`Onderhoud nodig`,test:`Testen`},timeAgo:{justNow:`Zojuist`,minutesAgo:`{{minutes}}m geleden`,hoursAgo:`{{hours}}u geleden`}},restoreBackup:{title:`Back-up herstellen`,restoring:`Herstellen...`,restoreComplete:`Herstel voltooid`,restoreFailed:`Herstel mislukt`,importSettings:`Instellingen importeren uit een back-upbestand`,pleaseWait:`Wacht terwijl je gegevens worden hersteld`,clickToSelect:`Klik om een back-upbestand te selecteren (.json of .zip)`,howDuplicateHandling:`Zo werkt afhandeling van duplicaten:`,categories:{printers:`Printers`,smartPlugs:`Slimme stekkers`,notificationProviders:`Meldingsproviders`,filaments:`Filamenten`,archives:`Archieven`,pendingUploads:`Openstaande uploads`,settingsTemplates:`Instellingen en sjablonen`},matchingInfo:{printers:`gekoppeld op serienummer`,smartPlugs:`gekoppeld op IP-adres`,notificationProviders:`gekoppeld op naam`,filaments:`gekoppeld op naam + type + merk`,archives:`overeenkomst op inhoudshash`,pendingUploads:`gekoppeld op bestandsnaam`,settingsTemplates:`altijd overschreven`},replaceExisting:`Bestaande gegevens vervangen`,keepExisting:`Bestaande gegevens behouden`,replaceDescription:`Items die al bestaan overschrijven met gegevens uit de back-up`,keepDescription:`Alleen items herstellen die nog niet bestaan`,caution:`Let op:`,cautionText:`Overschrijven vervangt je huidige configuraties door de back-upgegevens. Toegangscodes van printers worden om veiligheidsredenen nooit overschreven.`,itemsRestored:`Items hersteld`,itemsSkipped:`Items overgeslagen`,restored:`Hersteld`,skipped:`Overgeslagen (bestaan al)`,filesLabel:`Bestanden (3MF, miniaturen, enz.)`,newApiKeysGenerated:`Nieuwe API-sleutels gegenereerd`,newApiKeysWarning:`Deze sleutels worden maar één keer getoond. Kopieer ze nu!`,processingBackup:`Back-upbestand verwerken...`,noDataFound:`Er zijn geen gegevens gevonden om uit het back-upbestand te herstellen.`,failedToRestore:`Back-up herstellen mislukt. Controleer het bestandsformaat.`},backupExport:{title:`Back-up exporteren`,selectData:`Selecteer gegevens om op te nemen`,selectAll:`Alles selecteren`,selectNone:`Niets selecteren`,categoryDescriptions:{settings:`Taal, thema, updatevoorkeuren`,notifications:`ntfy, Pushover, Discord, enz.`,templates:`Aangepaste berichtsjablonen`,smartPlugs:`Tasmota-stekkerconfiguraties`,externalLinks:`Zijbalklinks naar externe services`,printers:`Printerinformatie (toegangscodes uitgesloten)`,plateDetection:`Referentieafbeeldingen van lege plaat`,filaments:`Filamenttypen en kosten`,maintenance:`Aangepaste onderhoudsschema's`,archives:`Alle afdrukgegevens + bestanden (3MF, miniaturen, foto's)`,projects:`Projecten, BOM-items en bijlagen`,pendingUploads:`Uploads van virtuele printer die op beoordeling wachten`,apiKeys:`Webhook-API-sleutels (nieuwe sleutels worden gegenereerd bij import)`},requiresPrinters:`Vereist dat Printers is geselecteerd`,zipFileWarning:`Er wordt een ZIP-bestand aangemaakt.`,zipFileDescription:`Bevat alle 3MF-bestanden, miniaturen, timelapses en foto's. Dit kan enige tijd duren en een groot bestand opleveren.`,includeAccessCodes:`Toegangscodes opnemen`,includeAccessCodesDescription:`Voor overdracht naar een andere machine`,includeAccessCodesWarning:`Toegangscodes worden als platte tekst opgenomen. Bewaar dit back-upbestand veilig!`,categoriesSelected:`{{selectedCount}} categorieën geselecteerd`},pendingUploads:{placeholders:{notes:`Voeg notities over deze afdruk toe...`},discardUpload:`Upload verwijderen`,archiveAllUploads:`Alle uploads archiveren`,discardAllUploads:`Alle uploads verwijderen`,archive:`Archief`,timeAgo:{justNow:`Zojuist`,minutesAgo:`{{minutes}}m geleden`,hoursAgo:`{{hours}}u geleden`,daysAgo:`{{days}}d geleden`}},apiBrowser:{placeholders:{requestBody:`JSON-requestbody...`,searchEndpoints:`Endpoints zoeken...`}},configureAmsSlot:{title:`AMS-slot configureren`,slotConfigured:`Slot geconfigureerd!`,configuringSlot:`Slot configureren:`,slotLabel:`{{ams}} Slot {{slot}}`,searchPresets:`Presets zoeken...`,colorPlaceholder:`Kleurnaam of hex (bijv. brown, FF8800)`,clearCustomColor:`Aangepaste kleur wissen`,noCloudPresets:`Geen cloudpresets. Meld je aan bij Bambu Cloud om te synchroniseren.`,noPresetsAvailable:`Geen presets beschikbaar. Meld je aan bij Bambu Cloud of importeer lokale profielen.`,noMatchingPresets:`Geen overeenkomende presets gevonden.`,custom:`Aangepast`,builtin:`Ingebouwd`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Instellingen naar printer verzonden`,filamentProfile:`Filamentprofiel`,kProfileLabel:`K-profiel (Pressure Advance)`,filteringFor:`Filteren op: {{material}}`,noKProfile:`Geen K-profiel (gebruik standaard 0.020)`,noMatchingKProfiles:`Geen overeenkomende K-profielen gevonden. Standaard K=0.020 wordt gebruikt.`,otherKProfiles:`Andere K-profielen op deze printer`,selectFilamentFirst:`Selecteer eerst een filamentprofiel`,kFromCalibration:`K={{value}} uit printerkalibratie`,customColorLabel:`Aangepaste kleur (optioneel)`,presetColors:`{{name}} kleuren:`,showLessColors:`Minder kleuren tonen`,showMoreColors:`Meer kleuren tonen`,clear:`Wissen`,hexLabel:`Hex: #{{hex}}`,resetting:`Resetten...`,resetSlot:`Slot resetten`,cancel:`Annuleren`,configuring:`Configureren...`,configureSlot:`Sleuf configureren`},githubBackup:{title:`Git-back-up`,history:`Geschiedenis`,downloadBackup:`Back-up downloaden`,restoreBackup:`Back-up herstellen`,noBackupsYet:`Nog geen back-ups`},emailSettings:{placeholders:{fromName:`BamBuddy`}},tagManagement:{searchTags:`Tags zoeken...`,renameTag:`Tag hernoemen`,deleteTag:`Tag verwijderen`},notificationTemplates:{placeholders:{title:`Meldingstitel...`,body:`Meldingsinhoud...`}},batchTag:{placeholders:{newTag:`Nieuwe tag invoeren...`}},photoGallery:{deletePhoto:`Foto verwijderen`},filamentHoverCard:{copySpoolUuid:`Spoel-UUID kopiëren`},kProfilesView:{hasNote:`Heeft notitie`,copyProfile:`Profiel kopiëren`},layout:{openMenu:`Menu openen`,noPermissionSystemInfo:`Je hebt geen machtiging om systeeminformatie te bekijken`},dashboard:{dragToReorder:`Sleep om te herschikken`,hideWidget:`Widget verbergen`},notificationProviderCard:{deleteNotificationProvider:`Meldingsprovider verwijderen`},fileManagerModal:{closeFileManager:`Bestandsbeheer sluiten`,sortFiles:`Bestanden sorteren`,goToParentFolder:`Ga naar bovenliggende map`,threeView:`3D-weergave`},embeddedCameraViewer:{refreshStream:`Stream vernieuwen`,close:`Sluiten`,zoomOut:`Uitzoomen`,resetZoom:`Zoom resetten`,zoomIn:`Inzoomen`,dragToResize:`Sleep om formaat te wijzigen`},timelapseViewer:{skipBack5s:`5 sec terug`,skipForward5s:`5 sec vooruit`},notificationProviders:{descriptions:{email:`SMTP-e-mailmeldingen`,telegram:`Meldingen via Telegram-bot`,discord:`Versturen naar Discord-kanaal via webhook`,ntfy:`Gratis, zelf te hosten pushmeldingen`,pushover:`Eenvoudige, betrouwbare pushmeldingen`,callmebot:`Gratis WhatsApp-meldingen via CallMeBot`,webhook:`Algemene HTTP POST naar elke URL`}},logViewer:{searchPlaceholder:`Zoek bericht of loggernaam...`,noLogEntries:`Geen logboekitems gevonden`},switchbarPopover:{noSwitchesInSwitchbar:`Geen schakelaars in de schakelbalk`},projectPageModal:{placeholders:{title:`Titel`,designer:`Ontwerper`,license:`Licentie`,description:`Voer beschrijving in...`,profileTitle:`Profieltitel`,profileDescription:`Profielbeschrijving...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`Wachten`,justNow:`Zojuist`,now:`Nu`,minsAgo:`{{count}}m geleden`,inMins:`over {{count}}m`,hoursAgo:`{{count}}u geleden`,inHours:`over {{count}}u`,daysAgo:`{{count}}d geleden`,inDays:`over {{count}}d`},spoolbuddy:{nav:{dashboard:`Dashboard`,ams:`AMS`,inventory:`Voorraad`,writeTag:`Schrijven`,settings:`Instellingen`},status:{nfcReady:`NFC gereed`,nfcOff:`NFC uit`,offline:`Offline`,online:`Online`,noPrinters:`Geen printers`,deviceOffline:`Apparaat offline`,waitingConnection:`Wachten op apparaatverbinding...`,systemReady:`Systeem gereed`,status:`Status`},dashboard:{readyToScan:`Gereed om te scannen`,idleMessage:`Plaats een spoel op de weegschaal om deze te identificeren`,nfcHint:`NFC-tag wordt automatisch gelezen`,device:`Apparaat`,syncWeight:`Gewicht synchroniseren`,weightSynced:`Gesynchroniseerd!`,unknownTag:`Onbekende tag`,newTag:`Nieuwe tag gedetecteerd`,onScale:`op weegschaal`,linkSpool:`Koppelen aan spoel`,linkTagTitle:`Tag aan spoel koppelen`,linkTag:`Tag koppelen`,selectSpool:`Selecteer een spoel om deze tag aan te koppelen:`,noUntagged:`Geen spoelen zonder tags gevonden`,tagDetected:`Tag gedetecteerd`,noTag:`Geen tag`,tagId:`Tag`,grossWeight:`Brutogewicht`,spoolSize:`Spoelgrootte`,close:`Sluiten`,currentSpool:`Huidige spoel`,plateReady:`Plaat gereed: {{name}}`,plateReadyLabel:`Platen gereed om vrij te geven`,plateClearAction:`Wissen`,plateClearedToast:`Plaat gemarkeerd als vrij`,plateClearFailed:`Plaat kon niet als vrij worden gemarkeerd`},modal:{spoolDetected:`Spoel gedetecteerd`,assignToAms:`Aan AMS toewijzen`,syncWeight:`Gewicht synchroniseren`,weightSynced:`Gesynchroniseerd!`,syncing:`Synchroniseren...`,newTagDetected:`Nieuwe tag gedetecteerd`,addToInventory:`Aan voorraad toevoegen`,assignToAmsTitle:`Aan AMS toewijzen`,selectSlot:`Selecteer een slot`,assign:`Toewijzen`,assigning:`Toewijzen...`,assignSuccess:`Toegewezen!`,assignPendingInsert:`Toegewezen. Sleuf wordt geconfigureerd zodra je de spoel plaatst.`,assignError:`Spoel toewijzen mislukt. Probeer het opnieuw.`,noPrinterSelected:`Selecteer een printer...`,noAmsDetected:`Geen AMS gedetecteerd op deze printer`,slot:`Sleuf`},weight:{noReading:`Geen meting`,stable:`Stabiel`,measuring:`Meten...`,tare:`Tarreren`,calibrate:`Kalibreren`},spool:{remaining:`Resterend`,material:`Materiaal`,brand:`Merk`,color:`Kleur`,coreWeight:`Kern`,labelWeight:`Label`,scaleWeight:`Weegschaal`,netWeight:`Netto`,lastUsed:`Laatst gebruikt`,unknownColor:`Onbekende kleur`},ams:{noData:`Geen AMS gedetecteerd`,connectAms:`Sluit een AMS aan om filamentslots te zien`,noPrinter:`Geen printer geselecteerd`,selectPrinter:`Selecteer een printer in de bovenste balk`,printerDisconnected:`Printer niet verbonden`,humidity:`Luchtvochtigheid`,level:`Niveau`,active:`Actief`,slot:`Sleuf`,empty:`Leeg`},inventory:{search:`Spoelen zoeken...`,empty:`Geen spoelen in voorraad`,noResults:`Geen overeenkomende spoelen`,spools:`spoelen`,addSpool:`Spoel toevoegen`},settings:{tabDevice:`Apparaat`,tabDisplay:`Weergave`,tabScale:`Weegschaal`,tabUpdates:`Updates`,nfcReader:`NFC-lezer`,type:`Type`,connection:`Verbinding`,notConnected:`N.v.t.`,deviceInfo:`Apparaatinformatie`,hostname:`Host`,uptime:`Uptime`,systemConfig:`Backend & authenticatie`,backendUrl:`Bambuddy-backend-URL`,apiToken:`API-token`,apiTokenPlaceholder:`Voer API-token in`,saveConfig:`Configuratie opslaan`,systemQueued:`Configuratie in wachtrij geplaatst.`,nfcDiagnostic:`NFC-diagnose`,scaleDiagnostic:`Weegschaaldiagnose`,readTagDiagnostic:`Tagleesdiagnose`,testNfc:`Lezer testen`,testScale:`Nauwkeurigheid testen`,testReadTag:`Tag lezen`,systemFieldsRequired:`Backend-URL is verplicht.`,brightness:`Helderheid`,saved:`Opgeslagen`,noBacklight:`Geen DSI-achtergrondverlichting gedetecteerd. Helderheidsregeling vereist een DSI-display.`,screenBlank:`Time-out schermuitschakeling`,screenBlankDesc:`Scherm schakelt uit na inactiviteit. Raak aan om te activeren.`,displayNote:`Helderheid wordt toegepast als softwarefilter.`,scaleCalibration:`Weegschaalkalibratie`,currentWeight:`Huidig gewicht`,tareOffset:`Tarreren`,calFactor:`Factor`,knownWeight:`Bekend gewicht`,calStep1:`Verwijder alle items van de weegschaal en druk op Nulpunt instellen.`,calStep2:`Plaats een bekend gewicht op de weegschaal.`,setZero:`Nulpunt instellen`,calibrateNow:`Kalibreren`,calibrated:`Gekalibreerd`,tareSet:`Tareeropdracht verzonden. Wachten op apparaat...`,tareComplete:`Tarreren voltooid!`,tareTimedOut:`Time-out bij tarreren — draait de SpoolBuddy-daemon?`,tareFailed:`Tareeropdracht verzenden mislukt`,zeroSet:`Nulpunt ingesteld. Plaats een bekend gewicht op de weegschaal.`,calibrationDone:`Kalibratie voltooid!`,calibrationFailed:`Kalibratie mislukt`,lastCalibrated:`Laatst gekalibreerd`,stable:`Stabiel`,settling:`Stabiliseren...`,firmware:`Firmware`,scale:`Weegschaal`,noDevice:`Geen SpoolBuddy-apparaat gevonden`,daemonVersion:`Daemonversie`,currentVersion:`Huidig`,versionPending:`Wachten op daemon...`,checking:`Controleren...`,checkUpdates:`Controleren op updates`,updateAvailable:`Update beschikbaar`,updateInstructions:`Bijwerken via SSH: voer het SpoolBuddy-installatiescript uit om te upgraden.`,upToDate:`Up-to-date`,includeBeta:`Bètaversies opnemen`},writeTag:{tabExisting:`Bestaande spoel`,tabNew:`Nieuwe spoel`,tabReplace:`Tag vervangen`,searchPlaceholder:`Zoeken op materiaal, kleur, merk...`,noUntaggedSpools:`Geen spoelen zonder tags`,noTaggedSpools:`Geen spoelen met tags`,selectSpool:`Selecteer een spoel en plaats daarna een lege NTAG op de lezer`,placeTag:`Plaats een NTAG op de lezer`,tagReady:`Tag gedetecteerd — gereed om te schrijven`,writeTag:`Tag schrijven`,replaceTag:`Tag vervangen`,writing:`Tag schrijven...`,waiting:`Wachten op SpoolBuddy...`,writeSuccess:`Tag succesvol geschreven!`,writeFailed:`Schrijven mislukt`,queueFailed:`Schrijfopdracht in wachtrij plaatsen mislukt`,tryAgain:`Opnieuw proberen`,cancel:`Annuleren`,replaceWarning:`Oude tag wordt ontkoppeld. Nieuwe tag vervangt deze.`,deviceOffline:`SpoolBuddy is offline`,material:`Materiaal`,colorName:`Kleurnaam`,color:`Kleur`,brand:`Merk`,weight:`Gewicht (g)`,createSpool:`Spoel aanmaken`,creating:`Maken...`,spoolCreated:`Spoel aangemaakt! Gereed om te schrijven.`,createFailed:`Spoel aanmaken mislukt`,incompleteDataWarning:`Tag geschreven met onvolledige Spoolman-gegevens`},quickMenu:{printerPower:`Printervoeding`,systemControls:`Systeem`,restartDaemon:`Daemon herstarten`,restartBrowser:`Browser herstarten`,reboot:`Opnieuw opstarten`,shutdown:`Afsluiten`,swipeToClose:`Veeg omlaag om te sluiten`,confirmTitle:`Bevestigen`,confirmShutdown:`Weet je zeker dat je SpoolBuddy wilt uitschakelen? Je hebt fysieke toegang nodig om hem weer in te schakelen.`,confirmReboot:`Weet je zeker dat je SpoolBuddy opnieuw wilt opstarten?`,confirmRestartDaemon:`SpoolBuddy-daemon opnieuw starten? NFC en de weegschaal zijn tijdelijk niet beschikbaar.`,confirmRestartBrowser:`Kioskbrowser opnieuw starten? Het scherm wordt kort zwart.`,confirm:`Bevestigen`,confirmPlugOn:`{{name}} inschakelen?`,confirmPlugOff:`{{name}} uitschakelen?`,turnOn:`Inschakelen`,turnOff:`Uitschakelen`}},diagnostic:{modalTitle:`Verbindingsdiagnose — {{name}}`,running:`Diagnose uitvoeren...`,runningElapsed:`Diagnose uitvoeren... ({{elapsed}}s)`,waitingForReportHint:`Wachten totdat de printer een statusrapport publiceert — dit kan maximaal {{max}} seconden duren.`,runFailed:`Diagnose kon niet worden uitgevoerd: {{error}}`,retry:`Opnieuw uitvoeren`,runButton:`Diagnose uitvoeren`,sectionTitle:`Verbindingsdiagnose`,sectionDescription:`Controleer waarom een printer geen verbinding maakt of niet afdrukt — bereikbaarheid van poorten, LAN Developer Mode, Docker-netwerkmodus en inloggegevens.`,noPrinters:`Geen printers geconfigureerd.`,overall:{ok:`Geen problemen gevonden — de printerverbinding ziet er gezond uit.`,warnings:`De printer zou moeten werken, maar sommige punten vereisen aandacht.`,problems:`Problemen gevonden die verklaren waarom de printer geen verbinding maakt of niet afdrukt.`},check:{port_mqtt:{title:`Besturingspoort (MQTT 8883)`,pass:`Bereikbaar — de printer accepteert besturingsverbindingen.`,fail:`Poort 8883 is niet bereikbaar. De printer is uitgeschakeld, heeft een ander IP-adres of een firewall blokkeert de poort. Controleer het IP-adres van de printer en of niets poort 8883 blokkeert.`},port_ftps:{title:`Bestandsoverdrachtpoort (FTPS 990)`,pass:`Bereikbaar — het verzenden van afdrukbestanden werkt.`,warn:`Poort 990 is niet bereikbaar. Monitoring kan nog werken, maar het verzenden van afdrukken naar de printer mislukt. Zorg dat poort 990 niet wordt geblokkeerd.`,warn_no_tls:`Poort 990 is open, maar de bestandsservice van de printer voltooit geen TLS-handshake. Afdrukbestanden, covers en timelapses kunnen niet worden opgehaald, waardoor archieven leeg blijven. Start de printer opnieuw — alleen de poort vrijgeven helpt niet.`},external_storage:{title:`Verzonden bestanden op externe opslag bewaren (installatiestap 4)`,pass:`De printer meldt dat deze optie aanstaat — verzonden bestanden worden op de SD-kaart opgeslagen en archieven bevatten miniaturen en slicermetadata.`,fail:`De printer meldt dat deze optie uitstaat. Schakel "Verzonden bestanden op externe opslag bewaren" in — op nieuwere firmware (P2S 01.02 / Bambu Studio 2.6+) staat de schakelaar in de Afdrukinstellingen van de printer; op oudere versies in het tabblad Apparaat van Bambu Studio / OrcaSlicer. Zonder deze optie mist elke gearchiveerde afdruk zijn miniatuur en slicermetadata.`,skip:`Niet gecontroleerd — hiervoor is een actieve MQTT-verbinding nodig. Bij oudere slicers, waar deze instelling alleen in de slicer staat, rapporteert de printer hem nooit. Daardoor kan deze controle slagen terwijl de optie uitstaat — controleer installatiestap 4 handmatig.`,skip_unsupported_model:`Dit model heeft een SD-slot maar geen manier om de optie in te schakelen — de huidige P1-seriefirmware toont de schakelaar niet in Bambu Studio en de printer heeft geen scherm. Hier is niets te herstellen; gearchiveerde afdrukken kunnen miniaturen en slicermetadata missen totdat Bambu Lab firmwareondersteuning toevoegt.`,fail_no_media:`De optie staat aan, maar de printer meldt dat er geen kaart of stick in het slot zit, waardoor verzonden bestanden nergens kunnen worden opgeslagen. Plaats er een en druk opnieuw af — tot die tijd mist elke gearchiveerde afdruk zijn miniatuur en slicermetadata.`,warn_internal_storage:`De optie staat aan en opslag is aanwezig, maar de laatste afdruk ging toch naar de interne opslag van de printer, die Bambuddy niet kan lezen. Bij H2-serie, P2S en X2D stuurt de knop Afdrukken van Bambu Studio altijd daarheen, ongeacht deze instelling. Afdrukken worden gearchiveerd met naam en timing, maar zonder miniatuur of slicermetadata. Voor volledige archieven start je afdrukken vanuit Bambuddy of slice je in OrcaSlicer — of gebruik in Bambu Studio Verzenden met Extern geselecteerd en start daarna de afdruk.`,warn_internal_history:`De optie staat aan en er is opslag aanwezig, maar de laatste print liep vanaf een bestand dat al op de printer stond — opnieuw afdrukken via het scherm, starten vanuit Handy, of een eerder verstuurd bestand. Die bibliotheek staat op interne opslag die Bambuddy niet kan lezen, en geen enkele instelling verandert dat, omdat er voor die print niets is verstuurd. Hij wordt nog steeds gearchiveerd met naam en tijden, maar zonder thumbnail of slicer-metadata. Start prints vanuit Bambuddy of verstuur ze vanuit de slicer voor volledige archieven.`},port_rtsps:{title:`Camerapoort ({{protocol}} {{port}})`,pass:`Bereikbaar — de camerastream werkt.`,warn:`Poort {{port}} is niet bereikbaar. De livecamera werkt niet. Dit heeft geen invloed op afdrukken.`},macos_local_network:{title:`macOS-toegang tot lokaal netwerk`,pass:`macOS staat Bambuddy toe het lokale netwerk te bereiken.`,warn_unsigned:`De Python waarmee Bambuddy draait heeft geen codehandtekening, dus macOS heeft niets om de toegang tot het lokale netwerk aan te koppelen en laat elke verbinding met de printer stilletjes vallen — zonder fout en zonder vraag. Voer het updatescript van Bambuddy (install/update_macos.sh) uit, dat de handtekening plaatst, en start Bambuddy daarna opnieuw. Interpreter: {{executable}}`,warn_permission:`Staat de printer aan en is hij op dit adres bereikbaar, open dan Systeeminstellingen > Privacy en beveiliging > Lokaal netwerk en controleer of de Python van Bambuddy is ingeschakeld. Zo niet, dan laat macOS lokale verbindingen stilletjes vallen, en een Python-update kan de oude toestemming achterlaten.`},network_mode:{title:`Netwerkmodus van de container`,genericRuntime:`een container`,pass:`Draait in {{runtime}} met host-netwerk.`,warn:`Bambuddy draait in {{runtime}} met bridge-netwerken. Printerdetectie en de Virtuele printer vereisen host-netwerk — maak de container opnieuw aan met host-netwerk ("network_mode: host" in docker-compose, "--network=host" bij Podman).`,skip:`Draait niet in een container — niet van toepassing.`,skip_unknown:`Bambuddy draait in {{runtime}}, maar de netwerkmodus kon niet worden bepaald. Als printerdetectie of de Virtuele printer niet werken, maak de container dan opnieuw aan met host-netwerk.`,skip_system_container:`Bambuddy draait in een {{runtime}}-systeemcontainer, die net als een virtuele machine op het LAN zit — niet van toepassing.`},subnet:{title:`Netwerksubnet`,pass:`De printer en Bambuddy bevinden zich op hetzelfde subnet.`,warn:`De printer ({{printer_ip}}) en Bambuddy ({{host_ip}}) bevinden zich op verschillende subnetten. Ze kunnen elkaar mogelijk niet bereiken tenzij routing tussen de subnetten is geconfigureerd.`,skip:`Subnet kon niet worden bepaald — overgeslagen.`},mqtt_auth:{title:`Printerinloggegevens`,pass:`De printer heeft de verbinding geaccepteerd.`,fail:`De printer is bereikbaar, maar Bambuddy is er niet mee verbonden. De toegangscode of het serienummer is waarschijnlijk onjuist — de toegangscode verandert telkens wanneer LAN Only of Developer Mode wordt omgeschakeld, dus kopieer hem opnieuw vanaf het printerscherm. Een printer die opnieuw opstart of het maximumaantal gelijktijdige verbindingen heeft bereikt, kan hetzelfde gedrag vertonen.`,fail_auth_rejected:`De printer heeft de inloggegevens van Bambuddy geweigerd. De toegangscode of het serienummer is onjuist — de toegangscode verandert telkens wanneer LAN Only of Developer Mode wordt omgeschakeld, dus kopieer hem opnieuw vanaf het printerscherm en sla hem op in de printerinstellingen.`,skip:`Niet gecontroleerd — de printer kon niet worden bereikt.`},developer_mode:{title:`LAN Developer Mode`,pass:`Developer Mode is ingeschakeld.`,fail:`Developer Mode staat UIT op de printer. Schakel deze in bij de LAN-instellingen van de printer — en bevestig met OK. Zonder deze modus starten afdrukken niet.`,skip:`Kon niet worden gecontroleerd — vereist een actieve verbinding met de printer.`},printer_publishing:{title:`Printer publiceert status`,pass:`De printer publiceert statusupdates — AMS, filamenten en K-profielen worden correct naar de slicer gespiegeld.`,fail:`De MQTT-broker heeft de verbinding geaccepteerd, maar de printer heeft geen statusrapporten gepubliceerd. Dit wordt bijna altijd veroorzaakt door een verkeerd of anders geschreven serienummer — het topic device/<serial>/report is hoofdlettergevoelig. Controleer het serienummer in de printerinstellingen opnieuw aan de hand van het printerscherm.`,skip:`Kon niet worden gecontroleerd — vereist een actieve verbinding met de printer.`}}},systemHealth:{sectionTitle:`Systeemgezondheid`,sectionDescription:`Scant recente logs op bekende problemen die je meestal zelf kunt oplossen voordat ze een supportticket worden.`,rescan:`Opnieuw scannen`,clean:`Geen bekende problemen gevonden in de laatste {{times}} logboekitems.`,logUnavailable:`Bestandslogging is uitgeschakeld, waardoor logs niet kunnen worden gescand. Schakel bestandslogging in om deze controle te gebruiken.`,learnMore:`Hoe op te lossen`,fixLabel:`Oplossing:`,occurrences:`{{times}}× gezien — laatst om {{lastSeen}}`,category:{layer8:`Dit kun je zelf oplossen`,environment:`Omgeving`,bug:`Meld dit probleem`},signature:{"ftp-auth-rejected":{name:`Printer heeft toegangscode geweigerd`,cause:`De printer heeft de login voor bestandsoverdracht geweigerd. De toegangscode is onjuist of gewijzigd nadat Developer Mode werd omgeschakeld.`,fix:`Kopieer de toegangscode opnieuw vanaf het printerscherm (LAN-instellingen) en werk deze bij in de printerinstellingen van Bambuddy.`},"ftp-connection-timeout":{name:`Time-out bij bestandsoverdrachtverbinding`,cause:`Bambuddy kon de bestandsoverdrachtpoort van de printer (FTPS 990) niet bereiken. De poort is geblokkeerd, de printer staat uit of bevindt zich op een ander subnet.`,fix:`Zorg dat niets poort 990 tussen Bambuddy en de printer blokkeert en dat beide zich op hetzelfde netwerk bevinden.`},"ftp-ssl-error":{name:`Beveiligde bestandsoverdracht-handshake mislukt`,cause:`De bestandsservice van de printer reageerde op poort 990 zonder TLS. De bestandsserver is vastgelopen — een printerprobleem, geen firewall- of firmwareprobleem.`,fix:`Start de printer opnieuw. Tot die tijd kunnen afdrukbestanden, covers en timelapses niet worden opgehaald; afdrukken zelf wordt niet beïnvloed.`},"bambu-cloud-captcha":{name:`Bambu Cloud vraagt om een CAPTCHA`,cause:`De anti-misbruiklaag van Bambu geeft dit netwerk een challenge, waardoor aanmelden bij Bambu Cloud niet kan worden voltooid. Dit is gekoppeld aan het openbare IP-adres, niet aan je account of deze installatie.`,fix:`Wacht — dit verdwijnt normaal binnen enkele uren en herhaald aanmelden verlengt het probleem. Om ondertussen verbinding te maken kun je aanmelden met een toegangstoken uit een browsersessie.`},"mqtt-connection-flapping":{name:`Printerverbinding blijft wegvallen`,cause:`De besturingsverbinding (MQTT 8883) verbreekt en herstelt herhaaldelijk — meestal door een zwakke netwerkverbinding of een gedeeltelijk geblokkeerde poort.`,fix:`Controleer het wifi-signaal bij de printer, gebruik bij voorkeur een bekabelde verbinding en zorg dat poort 8883 betrouwbaar bereikbaar is.`},"camera-connection-refused":{name:`Camerastream niet bereikbaar`,cause:`De livecamera kon niet worden bereikt op RTSPS-poort 322. De poort is geblokkeerd of de camera/LAN-liveweergave staat uit op de printer.`,fix:`Schakel de camera en LAN-liveweergave op de printer in en zorg dat poort 322 niet wordt geblokkeerd. Dit heeft geen invloed op afdrukken.`},"database-locked":{name:`Database-schrijfconflict`,cause:`De SQLite-database krijgt onder belasting fouten met "database is locked" — dit komt vaak voor wanneer meerdere printers tegelijk worden gebruikt.`,fix:`Schakel Bambuddy over naar een externe PostgreSQL-database. Zie de PostgreSQL-handleiding in de documentatie.`}}},vpDiagnostic:{title:`Installatiecontrole — {{name}}`,runButton:`Installatiecontrole uitvoeren`,running:`Installatiecontrole uitvoeren...`,runFailed:`Installatiecontrole kon niet worden uitgevoerd: {{error}}`,retry:`Opnieuw uitvoeren`,overall:{ok:`Alle controles geslaagd — deze virtuele printer is correct ingesteld.`,warnings:`De virtuele printer zou moeten werken, maar sommige punten vereisen aandacht.`,problems:`Problemen gevonden die verklaren waarom de slicer deze virtuele printer niet kan zien of gebruiken.`},check:{enabled:{title:`Virtuele printer ingeschakeld`,fail:`Deze virtuele printer is uitgeschakeld. Zet hem aan om hem detecteerbaar te maken.`},running:{title:`Services actief`,fail:`De virtuele printer is ingeschakeld, maar de services draaien niet. Controleer het Bambuddy-logboek — een bind-IP-conflict of machtigingsfout voorkomt meestal dat ze starten.`},bind_interface:{title:`Netwerkinterface koppelen`,fail:`De bind-interface is niet ingesteld of bestaat niet meer op deze host. Kies een huidige interface in de keuzelijst Bind-interface.`},access_code:{title:`Toegangscode ingesteld`,fail:`Er is geen toegangscode ingesteld. De slicer moet dezelfde toegangscode van 8 tekens krijgen die je hier instelt.`},target_printer:{title:`Doelprinter`,fail:`Er is geen doelprinter geselecteerd. Proxymodus heeft een echte printer nodig om naar door te sturen.`,warn:`De doelprinter is momenteel offline — proxyverkeer wordt hervat zodra hij opnieuw verbinding maakt.`},port_ftps:{title:`Bestandsuploadservice (poort {{port}})`,fail:`Niets luistert op poort {{port}} van het bind-IP, waardoor de slicer geen bestanden kan uploaden. Een poortconflict op deze interface is de gebruikelijke oorzaak.`},port_mqtt:{title:`Besturingsservice (poort {{port}})`,fail:`Niets luistert op poort {{port}} van het bind-IP, waardoor de slicer geen verbinding kan maken of status kan tonen.`},port_bind:{title:`Detectieservice (poort {{port}})`,fail:`Niets luistert op poort {{port}} van het bind-IP, waardoor de detectiehandshake van de slicer mislukt.`},privileged_ports:{title:`Binden aan bevoorrechte poort`,fail:`Poort {{port}} is lager dan 1024 en deze service mag deze niet binden — daarom luistert hierboven niets. Voeg AmbientCapabilities=CAP_NET_BIND_SERVICE toe aan /etc/systemd/system/bambuddy.service en herstart, of voer "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))" uit. Voeg bij Docker cap_add: [NET_BIND_SERVICE] toe.`},certificate:{title:`TLS-certificaat`,pass:`Certificaat gereed. Zorg dat het Bambuddy-CA-certificaat (hierboven) is geïmporteerd in de trust store van je slicer.`,fail:`Het TLS-certificaat voor deze virtuele printer ontbreekt. Controleer of de Bambuddy-datamap beschrijfbaar is.`}}},bugReport:{title:`Bug melden`,description:`Beschrijving`,descriptionPlaceholder:`Wat ging er mis? Beschrijf het probleem...`,email:`E-mail (optioneel)`,emailPlaceholder:`your@email.com`,emailPrivacy:`Als je dit invult, wordt je e-mailadres opgenomen in een ingeklapte sectie van het GitHub-issue zodat de beheerder contact kan opnemen.`,screenshot:`Schermafbeelding`,uploadOrPaste:`Upload, plak of sleep een afbeelding`,dataCollectedSummary:`Welke gegevens worden in het rapport opgenomen?`,dataIncluded:`Opgenomen:`,dataIncludedList:`Appversie, besturingssysteem, architectuur, Python-versie, databasestatistieken (alleen aantallen), printermodellen, aantallen nozzles, firmwareversies, verbindingsstatus, integratiestatus (Spoolman, MQTT, HA), niet-gevoelige instellingen, aantal netwerkinterfaces, Docker-details, dependencyversies.`,dataNeverIncluded:`Nooit opgenomen:`,dataNeverIncludedList:`Printernamen, serienummers, toegangscodes, wachtwoorden, IP-adressen, e-mailadressen, API-sleutels, tokens, webhook-URL's, hostnamen of gebruikersnamen.`,submit:`Verzenden`,startLogging:`Debuglogging starten`,stepEnableLogging:`Debuglogging ingeschakeld`,stepReproduce:`Reproduceer het probleem nu`,stepStopLogging:`Stoppen en rapport verzenden`,stopAndSubmit:`Stoppen en verzenden`,maxDuration:`Stopt automatisch na {{minutes}} min`,stoppingLogs:`Logs verzamelen en verzenden...`,submitting:`Bugrapport verzenden...`,submittingStepConnection:`Printerverbindingscontroles uitvoeren`,submittingStepVirtualPrinters:`Installatiecontroles virtuele printer uitvoeren`,submittingStepLogScan:`Recente logboeken scannen op bekende problemen`,submittingStepSubmit:`Rapport naar GitHub verzenden`,submitSuccess:`Bugrapport succesvol verzonden!`,submitFailed:`Bugrapport verzenden mislukt`,diagnosticChecking:`Printerverbindingen controleren...`,diagnosticHealthy:`Verbindingscontrole geslaagd — geen problemen gevonden met je printers.`,diagnosticSummary:`{{problems}} van {{total}} printers hebben verbindingsproblemen`,diagnosticIntro:`Een of meer printers hebben een verbindingsprobleem dat je probleem kan veroorzaken. Klap hieronder een printer open om de oplossing te zien — dit oplossen kan het probleem verhelpen zonder bugrapport. Je kunt hieronder nog steeds een rapport verzenden.`,logHealthSummary:`Bekende problemen gevonden in je logs`,logHealthIntro:`Recente logs komen overeen met bekende problemen. Bekijk de oplossingen hieronder — dit oplossen kan het probleem verhelpen zonder bugrapport. Je kunt hieronder nog steeds een rapport verzenden.`,thankYou:`Bedankt!`,submitted:`Je bugrapport is verzonden.`,viewIssue:`Issue bekijken`,closeKeepsRecording:`Je kunt dit paneel sluiten terwijl je het probleem reproduceert — de opname blijft actief en bij opnieuw openen kom je hier terug.`,resumeRecording:`Bugrapportopname — {{elapsed}}. Klik om af te ronden.`,resumeReport:`Rapport hervatten`,unexpectedError:`Er is een onverwachte fout opgetreden`},failureDetection:{title:`AI-foutdetectie`,description:`Bewaak afdrukken met een zelf-gehoste Obico ML API en voer automatisch acties uit bij gedetecteerde fouten.`,mlUrl:`Obico ML API-URL`,mlUrlHint:`Basis-URL van je zelf-gehoste Obico ml_api-container (bijv. http://192.168.1.10:3333).`,mlToken:`ML API-token (optioneel)`,mlTokenPlaceholder:`Laat leeg als de server zonder ML_API_TOKEN draait`,mlTokenHint:`Moet overeenkomen met de omgevingsvariabele ML_API_TOKEN van je Obico ml_api-container. Laat leeg wanneer de container zonder token draait.`,test:`Testen`,testSuccess:`ML API bereikbaar en gezond.`,testSuccessTokenUnknown:`ML API bereikbaar en gezond. Het token kon niet worden gecontroleerd.`,testFailed:`ML API kon niet worden bereikt.`,sensitivity:`Gevoeligheid`,sensitivityLow:`Laag (minder fout-positieven)`,sensitivityMedium:`Gemiddeld (gebalanceerd)`,sensitivityHigh:`Hoog (vroeg detecteren, meer fout-positieven)`,sensitivityHint:`Past de betrouwbaarheidsdrempels aan die waarschuwingen en fouten activeren.`,action:`Actie bij gedetecteerde fout`,actionNotify:`Alleen melden`,actionPause:`Afdruk pauzeren`,actionPauseOff:`Pauzeren en stroom uitschakelen`,pollInterval:`Controle-interval (seconden)`,pollIntervalHint:`Hoe vaak elke printer tijdens het afdrukken wordt gecontroleerd. Minimaal 5s, maximaal 120s.`,externalUrlMissing:`Externe URL is niet ingesteld.`,externalUrlHint:`De ML API haalt de cameramomentopname via een URL op. Stel de Externe URL in bij Algemene instellingen zodat de ML API-container Bambuddy kan bereiken.`,perPrinterTitle:`Bewaakte printers`,perPrinterHint:`Kies welke printers door de detectieservice worden bewaakt.`,monitorAll:`Alle verbonden printers bewaken`,statusTitle:`Status`,serviceRunning:`Service actief`,thresholds:`Lage / hoge drempels`,activePrinters:`Actieve afdrukken`,noActivePrints:`Er worden momenteel geen afdrukken uitgevoerd.`,historyTitle:`Recente detecties`,noHistory:`Nog geen detecties.`},makerworld:{title:`MakerWorld`,description:`Plak een MakerWorld-model-URL om het rechtstreeks vanuit Bambuddy te importeren en af te drukken — zonder naar de Bambu Handy-app te gaan.`,pasteUrlHeader:`Importeren vanuit MakerWorld`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… of plak een MakerWorld-link`,resolveButton:`Ophalen`,signInRequiredTitle:`Aanmelden bij Bambu Cloud vereist om te downloaden`,signInRequiredBody:`Je kunt modeldetails anoniem bekijken, maar MakerWorld vereist een Bambu Cloud-account om 3MF-bestanden te downloaden.`,signInExpiredTitle:`Bambu Cloud-login verlopen`,signInExpiredBody:`Je bent nog aangemeld bij Bambuddy, maar Bambu Lab accepteert het opgeslagen token niet meer, waardoor downloads mislukken. Meld je opnieuw aan bij Bambu Cloud.`,openCloudSettings:`Cloudinstellingen openen`,untitledModel:`Naamloos model`,byCreator:`door {{name}}`,downloadsCount:`{{count}} downloads`,licensePrefix:`Licentie`,alreadyImported:`Al in bibliotheek`,openOnMakerworld:`Openen op MakerWorld`,alreadyInLibrary:`Dit model staat al in je bibliotheek — je vindt het in Bestandsbeheer → MakerWorld`,importSuccess:`{{filename}} geïmporteerd — opgeslagen in Bestandsbeheer → MakerWorld`,platesHeader:`Platen ({{count}})`,plateDefaultName:`Plaat {{n}}`,materialCount:`{{count}} filamenten`,amsRequired:`AMS vereist`,slicedFor:`Gesliced voor {{printer}}`,alsoCompatible:`Ook als compatibel gemarkeerd: {{printers}}`,importToLibrary:`Opslaan`,sliceIn:`Opslaan en slicen in {{slicer}}`,disclaimer:`De MakerWorld-integratie gebruikt door de community gedocumenteerde API-endpoints. Bambuddy is niet verbonden met of goedgekeurd door MakerWorld of Bambu Lab.`,lastImportSuccess:`Geïmporteerd in je bibliotheek`,lastImportAlreadyInLibrary:`Al in je bibliotheek`,viewInLibrary:`Bekijken in Bestandsbeheer`,openInBambuStudio:`Openen in Bambu Studio`,openInOrcaSlicer:`Openen in OrcaSlicer`,importTo:`Importeren in bestandsbeheer`,recentImportsHeader:`Recente imports`,phaseResolving:`Ophalen`,phaseDownloading:`Downloaden`,folderAuto:`MakerWorld (standaard)`,importAll:`Alles importeren`,importAllProgress:`Importeren {{current}}/{{total}}`,openGallery:`Afbeeldingengalerij openen`,galleryPrev:`Vorige afbeelding`,galleryNext:`Volgende afbeelding`,deleteImport:`Uit bibliotheek verwijderen`,importDeleting:`Verwijderen…`,importDeleted:`Uit bibliotheek verwijderd`,confirmDelete:`{{filename}} uit de bibliotheek verwijderen? Hiermee wordt het lokale bestand verwijderd, maar de plaat kan opnieuw vanuit MakerWorld worden geïmporteerd.`,errors:{resolveFailed:`Die MakerWorld-URL kon niet worden opgehaald.`,downloadFailed:`Download mislukt. Probeer het opnieuw.`,deleteFailed:`Bestand kon niet uit de bibliotheek worden verwijderd.`}},gcodeViewer:{filamentSlot:`Filament {{n}}`,loading:`Toolpath lezen…`,loadFailed:`G-code voor dit bestand kon niet worden geladen.`,showTravel:`Verplaatsingen`,topLayer:`Bovenste laag`,bottomLayer:`Onderste laag`,noSource:`Er is geen bestand opgegeven om te bekijken.`,view:{filament:`Filament`,feature:`Kenmerk`,height:`Hoogte`,width:`Breedte`},feature:{wall:`Wanden`,sparseInfill:`Schaars infill`,solidInfill:`Volledig infill`,bridge:`Brug / overhang`,support:`Support`,skirt:`Skirt / brim`,gapFill:`Gap fill`,ironing:`Ironing`,primeTower:`Prime tower`},back:`Terug`,backToArchives:`Terug naar Afdrukarchieven`,backToFiles:`Terug naar Bestandsbeheer`,plates:`Platen`,plateN:`Plaat {{n}}`},libraryTrash:{title:`Prullenbak`,headerButton:`Prullenbak`,headerTooltip:`Bekijk bestanden die naar de prullenbak zijn verplaatst`,backToFiles:`Terug naar Bestandsbeheer`,subtitleAdmin:`Verwijderde bestanden blijven hier {{days}} dagen en worden daarna automatisch verwijderd. Deze weergave toont verwijderde bestanden van alle gebruikers.`,subtitleUser:`Verwijderde bestanden blijven hier {{days}} dagen en worden daarna automatisch verwijderd.`,loading:`Prullenbak laden…`,loadError:`Prullenbak kon niet worden geladen.`,empty:`De prullenbak is leeg.`,summary:`{{count}} bestanden · {{size}}`,emptyTrash:`Prullenbak legen`,restore:`Herstellen`,purgeNow:`Nu verwijderen`,autoPurgeIn:`Automatische verwijdering over {{when}}`,days:`dagen`,retentionLabel:`Automatisch verwijderen na`,selectAll:`Alles selecteren`,selectOne:`{{filename}} selecteren`,selectionCount:`{{count}} geselecteerd`,bulkRestore:`Geselecteerde herstellen`,bulkPurge:`Geselecteerde verwijderen`,col:{filename:`Bestand`,folder:`Map`,size:`Grootte`,deleted:`Naar prullenbak verplaatst`,autoPurge:`Automatisch verwijderen`,owner:`Eigenaar`,actions:`Acties`},confirm:{purgeTitle:`Definitief verwijderen?`,purgeBody:`{{filename}} wordt van de schijf verwijderd en kan niet worden hersteld.`,emptyTitle:`Prullenbak legen?`,emptyBody:`Alle {{count}} bestanden worden van de schijf verwijderd. Dit kan niet ongedaan worden gemaakt.`,bulkPurgeTitle:`Geselecteerde bestanden definitief verwijderen?`,bulkPurgeBody:`De {{count}} geselecteerde bestanden worden van de schijf verwijderd en kunnen niet worden hersteld.`,cta:`Definitief verwijderen`},toast:{restored:`Bestand hersteld.`,restoreFailed:`Bestand kon niet worden hersteld.`,purged:`Bestand definitief verwijderd.`,purgeFailed:`Bestand kon niet worden verwijderd.`,emptied:`{{count}} bestand(en) uit prullenbak verwijderd.`,emptyFailed:`Prullenbak kon niet worden geleegd.`,retentionSaved:`Automatisch verwijderen ingesteld op {{days}} dagen.`,retentionFailed:`Bewaarinstelling kon niet worden opgeslagen.`,bulkRestored:`{{count}} bestand(en) hersteld.`,bulkPurged:`{{count}} bestand(en) verwijderd.`}},libraryPurge:{title:`Oude bestanden opschonen`,headerButton:`Oude opschonen`,headerTooltip:`Oude bestanden in bulk naar prullenbak verplaatsen`,description:`Ruim oude bestanden in je bibliotheek in één keer op. Bestanden met afdrukgeschiedenis worden beoordeeld op de datum waarop ze voor het laatst zijn afgedrukt; nooit afgedrukte bestanden op hun uploaddatum.`,ageLabel:`Bestanden ouder dan verplaatsen`,days:`dagen`,includeNeverPrinted:`Bestanden opnemen die nooit zijn afgedrukt`,effectsTitle:`Wat gebeurt er wanneer je op Opschonen klikt`,effect1:`Overeenkomende bestanden worden naar de Prullenbak verplaatst — ze worden nog niet van de schijf verwijderd.`,effect2:`Je kunt ze vanuit de Prullenbak herstellen totdat de bewaartermijn is verstreken.`,effect3:`Na de bewaartermijn verwijdert de prullenbakopruimer ze definitief van de schijf.`,effect4:`Bestanden in externe (gekoppelde) mappen worden overgeslagen — Bambuddy verwijdert nooit bytes waarvan het geen eigenaar is.`,previewLoading:`Controleren hoeveel bestanden overeenkomen…`,previewFailed:`Voorbeeld van opschoning kon niet worden gemaakt.`,previewSummary:`{{count}} bestanden · {{size}} zouden naar de prullenbak worden verplaatst`,andMore:`…en nog {{count}}`,warning:`Bestanden in de prullenbak tellen nog mee voor opslagruimte totdat de bewaartermijn verloopt. Leeg daarna de Prullenbak om direct schijfruimte vrij te maken.`,confirmCta:`{{count}} naar prullenbak verplaatsen`,purging:`Naar prullenbak verplaatsen…`,toast:{success:`{{count}} bestand(en) naar prullenbak verplaatst.`,failed:`Bestanden opschonen mislukt.`}},libraryAutoPurge:{enableLabel:`Oude bestanden automatisch opschonen`,enableDescription:`Voert de beheeropschoning eenmaal per dag uit. Bestanden gaan eerst naar de Prullenbak — ze worden niet direct verwijderd.`,ageLabel:`Bestanden automatisch opschonen ouder dan`,ageDescription:`Minimaal 7 dagen, maximaal 10 jaar. Gebruikt dezelfde leeftijdsregel als de handmatige knop Opschonen.`,days:`dagen`,includeNeverPrinted:`Bestanden opnemen die nooit zijn afgedrukt`,saveFailed:`Instellingen voor automatisch opschonen konden niet worden opgeslagen.`},archivePurge:{headerButton:`Oude opschonen`,headerTooltip:`Oude archieven in bulk verwijderen`,title:`Oude archieven opschonen`,description:`Ruim oude afdrukgeschiedenis op. Elk archief wordt beoordeeld op de meest recente voltooiingsdatum van een afdruk — opnieuw afdrukken vernieuwt de leeftijd, zodat actief werk nooit wordt opgeschoond.`,ageLabel:`Archieven verwijderen die niet zijn afgedrukt in de laatste`,days:`dagen`,effectsTitle:`Wat gebeurt er wanneer je op Opschonen klikt`,effect1:`Elk overeenkomend archief wordt verborgen uit de lijsten en de bestanden worden van de schijf verwijderd (3MF, miniatuur, timelapse, bron-3MF, F3D-ontwerpbestand, foto's).`,effect2:`De archiefrij blijft in de database zodat Snelle statistieken de bijdragen voor filament, tijd, kosten en energie behoudt — hetzelfde als de standaard bij het verwijderen van één archief.`,effect3:`Vink hieronder "Ook uit statistieken verwijderen" aan om ook de bijdrage aan Snelle statistieken te verwijderen (zelfde als de optie bij het verwijderen van één archief). Dit is onomkeerbaar.`,effect4:`Opnieuw afdrukken vernieuwt de leeftijdsklok van een archief, zodat archieven die je nog gebruikt veilig blijven.`,purgeStatsLabel:`Ook uit statistieken verwijderen`,purgeStatsHint:`Verwijdert de overeenkomende archieven uit Snelle statistieken (filament, tijd, kosten, energie). Zonder dit behoudt Snelle statistieken elke bijdrage en verdwijnen alleen de bestanden van de schijf.`,previewLoading:`Controleren hoeveel archieven overeenkomen…`,previewFailed:`Voorbeeld van opschoning kon niet worden gemaakt.`,previewSummary:`{{count}} archieven · {{size}} zouden worden verwijderd`,andMore:`…en nog {{count}}`,warning:`Bestanden worden van de schijf verwijderd en kunnen niet worden hersteld. Download of markeer als favoriet wat je wilt bewaren voordat je doorgaat.`,confirmCta:`{{count}} archief/archieven verwijderen`,purging:`Verwijderen…`,toast:{success:`{{count}} archief/archieven verwijderd.`,failed:`Archieven opschonen mislukt.`}},archiveAutoPurge:{enableLabel:`Oude archieven automatisch opschonen`,enableDescription:`Verbergt eenmaal per dag archieven uit de lijsten en verwijdert hun bestanden van de schijf als ze niet binnen de ingestelde termijn zijn afgedrukt. Opnieuw afdrukken reset de klok.`,ageLabel:`Archieven automatisch verwijderen die niet zijn afgedrukt in de laatste`,ageDescription:`Minimaal 7 dagen, maximaal 10 jaar. Gebaseerd op de meest recente voltooiing van een afdruk — opnieuw afdrukken vernieuwt de leeftijd. Verwijdert de 3MF, miniatuur, timelapse, bron-3MF, F3D en foto's.`,days:`dagen`,purgeStatsLabel:`Ook uit statistieken verwijderen`,purgeStatsDescription:`Wanneer ingeschakeld verwijdert de dagelijkse opruimer elk opgeschoond archief ook uit Snelle statistieken (filament, tijd, kosten, energie). Standaard uit — Snelle statistieken behoudt de bijdrage; alleen de bestanden verdwijnen van de schijf.`,runNow:`Archieven nu opschonen`,saveFailed:`Instellingen voor automatisch opschonen konden niet worden opgeslagen.`},cameraTokens:{scope:{camera_stream:`Camerastream`,camwall:`Cameramuur`,overlay:`Streamingoverlay`},title:`Camera-API-tokens`,navTitle:`Camera-API-tokens`,description:`Langlevende tokens om de camerastream in Home Assistant, Frigate, kiosks of andere tools met een stabiele URL in te sluiten. Kies het bereik wanneer je er een maakt; een token kan op elk moment worden ingetrokken.`,loading:`Laden…`,confirmRevoke:{title:`Dit token intrekken?`,body:`Elk apparaat dat "{{name}}" gebruikt verliest direct toegang. Dit kan niet ongedaan worden gemaakt.`,cancel:`Annuleren`,confirm:`Intrekken`},create:{scopeLabel:`Bereik`,hintCameraStream:`Een camerastreamtoken kan alleen camerastreams en momentopnamen ophalen. Gebruik dit voor Home Assistant, Frigate of iets dat één camera insluit.`,hintCamWall:`Een Cameramuur-token opent /camwall op een scherm zonder login. Het kan de naam en status van elke printer en hun camerastreams zien. Het kan geen bestandsnamen, adressen of toegangscodes zien.`,hintOverlay:`Een Streaming Overlay-token opent /overlay/{printerId} op een scherm zonder login — voor OBS of een livestream. Het kan de camerastream van één printer plus de live afdrukstatus zien, inclusief de bestandsnaam op het scherm. Het kan geen adressen of toegangscodes zien.`,title:`Nieuw token aanmaken`,nameLabel:`Tokennaam`,namePlaceholder:`bijv. Home Assistant`,daysLabel:`Dagen tot vervaldatum`,submit:`Maken`,hint:`Maximale geldigheidsduur is 365 dagen. De tokenwaarde wordt slechts één keer getoond bij het aanmaken — kopieer deze nu.`},created:{camWallUrlTitle:`Cameramuur-URL voor dit scherm`,camWallUrlHint:`Open dit op het scherm. Iedereen die de URL kan lezen kan de muur bekijken, dus behandel hem als een sleutel — trek het token in om de toegang van het scherm te stoppen.`,overlayUrlTitle:`Overlay-URL voor OBS`,overlayUrlHint:`Voeg dit toe als Browser Source in OBS. Wijzig het nummer /overlay/1 in het nummer van je printer (uit de URL op de pagina Printers). Iedereen die de URL kan lezen kan de stream bekijken, dus behandel hem als een sleutel — trek het token in om de toegang te stoppen.`,title:`Token aangemaakt — kopieer het nu`,warning:`Dit is de enige keer dat dit token zichtbaar is. Nadat je dit venster sluit kun je het nooit meer bekijken.`,copy:`Kopiëren`,dismiss:`Ik heb het opgeslagen`},list:{scope:`Bereik`,myTitle:`Mijn tokens`,allTitle:`Alle gebruikers (beheerweergave)`,empty:`Nog geen tokens.`,name:`Naam`,owner:`Eigenaar`,prefix:`Voorvoegsel`,created:`Aangemaakt`,expires:`Verloopt`,lastUsed:`Laatst gebruikt`,revoke:`Intrekken`,expired:`Verlopen`},toast:{created:`Token aangemaakt`,createFailed:`Token aanmaken mislukt`,revoked:`Token ingetrokken`,revokeFailed:`Token intrekken mislukt`,loadFailed:`Tokens laden mislukt`,copied:`Naar klembord gekopieerd`,copyFailed:`Kopiëren mislukt — selecteer en kopieer handmatig`}},forecast:{title:`Prognose`,noSpools:`Geen actieve spoelen gevonden. Voeg spoelen toe aan je voorraad om prognosegegevens te zien.`,noUsageData:`Geen verbruiksgegevens beschikbaar — voorraadverloop kan niet worden voorspeld.`,sku:`SKU`,material:`Materiaal`,stock:`Voorraad`,dailyRate:`Tempo`,daysLeft:`Dagen resterend`,emptyBy:`Leeg op`,reorderBy:`Bestellen vóór`,actions:`Acties`,trend:`Trend`,estimated:`Geschat`,noData:`Geen gegevens`,timeframe:`Periode`,chartTitle:`Verwachte voorraad — top 5 materialen`,dashedLinesROP:`Stippellijnen = bestelpunten`,stockLevel:`Voorraadniveau`,reorderPoint:`Bestelpunt`,safetyMargin:`Veiligheidsmarge`,trendLegend:`Trend (op historie gebaseerd, serviceniveau 95%)`,estimatedLegend:`Geschat (gewichtsverschil)`,noDataLegend:`Geen gegevens`,ropLabel:`ROP`,ssLabel:`SS`,safetyStockLegend:`Veiligheidsvoorraad`,stockArrivalLegend:`Voorraadontvangst`,stockoutLegend:`Voorraad op`,alertCount_one:`{{count}} waarschuwing`,alertCount_other:`{{count}} waarschuwingen`,order:`Bestellen`,save:`Opslaan`,cancel:`Annuleren`,settingsSaved:`Instellingen opgeslagen`,failedSaveSettings:`Instellingen opslaan mislukt`,globalLeadTimeSaved:`Globale levertijd opgeslagen`,globalLeadTime:`Globale levertijd`,globalLeadTimeHint:`Ondergrens voor globale levertijd — gebruikt bij de berekening van het bestelpunt voor alle SKU's`,skuLeadTimeOverride:`Overschrijving levertijd`,skuLeadTimeHint:`0 = globale levertijd gebruiken. Stel >0 in om voor deze SKU te overschrijven.`,safetyMarginLabel:`Veiligheidsmarge`,effectiveLeadTime:`Effectieve levertijd`,effectiveLeadTimeHint:`max(globaal {{global}}d, SKU {{sku}}d)`,reorderPointHint:`d̄ × LT + veiligheidsmarge — bestellen wanneer voorraad dit niveau bereikt`,safetyMarginHint:`Statistische veiligheidsvoorraad (z=1.65 × σ × √LT) + door gebruiker ingestelde buffer`,safetyMarginHintDays:`Buffer bovenop de statistische veiligheidsvoorraad.{{approx}}`,safetyMarginHintDaysApprox:` ≈ {{g}}g bij huidig verbruik.`,safetyMarginHintG:`Vaste gewichtsbuffer bovenop de statistische veiligheidsvoorraad.{{approx}}`,safetyMarginHintGApprox:` ≈ {{days}}d bij huidig verbruik.`,individualSpools:`Afzonderlijke spoelen`,labelWeight:`Label`,spoolCount_one:`{{count}} spoel`,spoolCount_other:`{{count}} spoelen`,stockBreakRisk:`Risico op voorraadtekort`,stockBreakDetail:`Nog {{days}}d, levertijd {{lt}}d.`,stockBreakBefore:`Voorraadtekort vóór aanvulling`,reorderNow:`Nu bestellen`,reorderTriggerPassed:`Activeringsdatum {{date}} is verstreken.`,shoppingList:`Boodschappenlijst`,shoppingListItems_one:`({{count}} item)`,shoppingListItems_other:`({{count}} items)`,shoppingListEmpty:`Boodschappenlijst is leeg. Klik op het winkelwagenpictogram van een rij om items toe te voegen.`,addToCart:`Aan boodschappenlijst toevoegen`,alertsSnoozed:`Waarschuwingen voor deze SKU dempen`,alertsEnabled:`Waarschuwingen voor deze SKU weer inschakelen`,addedToCart:`Toegevoegd aan boodschappenlijst`,failedAddItem:`Item toevoegen mislukt`,listView:`Lijst`,logisticsView:`Logistiek`,qty:`Aantal`,weight:`Gewicht`,leadTime:`Levertijd`,expectedRestock:`Verwachte aanvulling`,status:`Status`,note:`Notitie`,pending:`In afwachting`,purchased:`Gekocht`,received:`Ontvangen`,markPurchased:`Markeren als gekocht`,markReceived:`Markeren als ontvangen — voegt spoelen toe aan Voorraad`,resetToPending:`Terugzetten naar in behandeling`,remove:`Verwijderen`,clearAll:`Alles wissen`,downloadCsv:`CSV`,addToCartTitle:`Aan boodschappenlijst toevoegen`,byQuantity:`Op aantal`,byDuration:`Op duur`,numberOfSpools:`Aantal spoelen`,lastHowManyDays:`Hoeveel dagen moet dit meegaan?`,noUsageQty:`Geen verbruiksgegevens — aantal ingesteld op 1.`,noteOptional:`Notitie (optioneel)`,notePlaceholder:`bijv. voor project X, dringend…`,addNSpools_one:`{{count}} spoel toevoegen`,addNSpools_other:`{{count}} spoelen toevoegen`,onArrival:`Bij aankomst`,stockBreakIn:`Voorraadtekort over {{days}}d.`,stockRunsOutBefore:`Voorraad raakt op voordat de levertijd van {{lt}}d is verstreken.`,atRate:`Bij {{rate}}g/dag heb je nodig`,moreSpools_one:`nog {{count}} spoel`,moreSpools_other:`nog {{count}} spoelen`,bridgeGap:`om het tekort te overbruggen.`,noReadAccess:`Je hebt geen machtiging om voorraadprognoses te bekijken.`,noWriteAccess:`Je hebt geen machtiging om prognose-instellingen te wijzigen.`}}},ko:{translation:{nav:{printers:`프린터`,archives:`아카이브`,queue:`대기열`,stats:`통계`,profiles:`프로필`,maintenance:`유지보수`,projects:`프로젝트`,inventory:`필라멘트`,finance:`재무`,files:`파일 관리자`,makerworld:`MakerWorld`,notifications:`알림`,settings:`설정`,system:`시스템`,collapseSidebar:`사이드바 접기`,expandSidebar:`사이드바 펼치기`,update:`업데이트`,updateAvailable:`업데이트 가능: v{{version}}`,updateAvailableBanner:`버전 {{version}}이(가) 출시되었습니다!`,viewUpdate:`업데이트 보기`,viewOnGithub:`GitHub에서 보기`,keyboardShortcuts:`키보드 단축키 (?)`,switchToLight:`라이트 모드로 전환`,switchToDark:`다크 모드로 전환`,switchToSystem:`기기 설정으로 전환`,smartSwitches:`스마트 스위치`,logout:`로그아웃`,installApp:`앱 설치`,installAppSuccess:`Bambuddy가 설치되었습니다`},common:{plusNMore:`외 {{count}}개`,save:`저장`,saving:`저장 중...`,cancel:`취소`,delete:`삭제`,edit:`편집`,add:`추가`,close:`닫기`,confirm:`확인`,loading:`로딩 중...`,error:`오류`,errorLoading:`데이터 로딩 오류`,retry:`재시도`,success:`성공`,warning:`경고`,enabled:`활성화됨`,disabled:`비활성화됨`,yes:`예`,no:`아니요`,on:`켜짐`,off:`꺼짐`,all:`전체`,none:`없음`,search:`검색`,filter:`필터`,sort:`정렬`,refresh:`새로고침`,download:`다운로드`,upload:`업로드`,uploading:`업로드 중...`,uploadFailed:`업로드 실패`,actions:`작업`,status:`상태`,name:`이름`,description:`설명`,date:`날짜`,time:`시간`,hours:`시간`,minutes:`분`,seconds:`초`,days:`일`,enable:`활성화`,disable:`비활성화`,permissions:`권한`,noPrinters:`등록된 프린터가 없습니다`,noData:`데이터가 없습니다`,linkNotFound:`링크를 찾을 수 없습니다`,required:`필수`,optional:`선택`,dismiss:`닫기`,apply:`적용`,reset:`초기화`,export:`내보내기`,import:`가져오기`,clear:`지우기`,selectAll:`전체 선택`,deselectAll:`전체 해제`,noChange:`— 변경 없음 —`,unchanged:`변경 없음`,unassigned:`미할당`,unknown:`알 수 없음`,unknownError:`알 수 없는 오류`,today:`오늘`,tomorrow:`내일`,asap:`즉시`,overdue:`기한 초과`,now:`지금`,collapse:`접기`,expand:`펼치기`,previous:`이전`,next:`다음`,viewArchive:`아카이브 보기`,viewInFileManager:`파일 관리자에서 보기`,addedBy:`{{username}}님이 추가함`,prints:`인쇄`,more:`+{{count}}개 더`,ascending:`오름차순`,descending:`내림차순`,back:`뒤로`,copy:`복사`,copied:`복사됨!`,printer:`프린터`,remove:`제거`,type:`유형`,print:`인쇄`,rename:`이름 변경`,move:`이동`,create:`만들기`,duplicate:`복제`,left:`왼쪽`,right:`오른쪽`,user:`사용자`,run:`실행`,running:`실행 중...`},finance:{allTypes:`모든 유형`,allCostCenters:`모든 비용 센터`,title:`재무`,subtitle:`지갑, 개인 거래 및 비용 센터`,noAccess:`재무 데이터를 볼 권한이 없습니다.`,personalView:`개인 보기`,adminView:`관리자 보기`,createCostCenter:`비용 센터 만들기`,adjustWallet:`지갑 조정`,addManualPrint:`수동 인쇄 추가`,manageMembers:`비용 센터 구성원 관리`,currentBalance:`개인 잔액`,transactions:`거래`,personalTransactions:`개인 거래`,costCenters:`비용 센터`,availableForPrinting:`인쇄 할당 가능`,costCenterName:`이름`,budgetType:`예산 유형`,monthlyBudget:`월 예산`,totalBudget:`총예산`,noBudget:`예산 없음`,create:`만들기`,selectUser:`사용자 선택`,transactionType:`유형`,amount:`금액`,noCostCenter:`비용 센터 없음`,descriptionOptional:`설명(선택 사항)`,applyAdjustment:`조정 적용`,memberCanPrint:`구성원이 인쇄할 수 있음`,addMember:`구성원 추가`,canPrint:`인쇄 가능`,noMembers:`할당된 구성원이 없습니다.`,editCostCenter:`비용 센터 편집`,myCostCenters:`내 비용 센터`,costCentersHint:`예산 한도를 검토하고 비용을 관리하세요`,noCostCenters:`비용 센터를 찾을 수 없습니다.`,owner:`소유자`,balance:`계정 잔액`,unlimited:`무제한`,budgetPolicyHint:`계정 잔액은 비용을 기록합니다. 인쇄는 선택한 비용 센터의 예산으로만 제한되며, 예산이 없으면 무제한입니다.`,budget:`예산`,shared:`공유`,cannotEditPrivateCostCenter:`비공개 비용 센터는 여기에서 편집할 수 없습니다`,recentTransactions:`최근 거래`,transactionsHint:`유형 및 비용 센터별 필터링`,first:`처음`,prev:`이전`,next:`다음`,last:`마지막`,pageNumberOf:`{{total}}페이지 중 {{page}}페이지`,noTransactions:`사용 가능한 거래가 없습니다.`,noTransactionsForFilter:`선택한 필터와 일치하는 거래가 없습니다.`,costCenter:`비용 센터`,balanceAfter:`거래 후 잔액`,userWithId:`사용자 #{{id}}`,partial:`일부`,editTransaction:`거래 편집`,selectCostCenter:`비용 센터 선택...`,costCenterRequired:`비용 센터를 선택하세요`,amountExample:`예: 4.00`,manualAdjustmentExample:`예: 수동 조정`,userRequired:`사용자를 선택하세요`,amountInvalid:`금액은 유효한 숫자여야 합니다`,createdCostCenter:`비용 센터를 만들었습니다`,createCostCenterFailed:`비용 센터를 만들지 못했습니다`,transactionDeleted:`거래를 삭제했습니다`,deleteTransactionFailed:`거래를 삭제하지 못했습니다`,transactionEdited:`거래를 업데이트하고 원장을 다시 계산했습니다`,editTransactionFailed:`거래를 편집하지 못했습니다`,manualPrintCreated:`수동 인쇄 비용을 추가하고 원장을 다시 계산했습니다`,manualPrintFailed:`수동 인쇄를 만들지 못했습니다`,memberSaved:`구성원을 저장했습니다`,memberSaveFailed:`구성원을 저장하지 못했습니다`,memberRemoved:`구성원을 제거했습니다`,memberRemoveFailed:`구성원을 제거하지 못했습니다`,costCenterNameRequired:`비용 센터 이름은 필수입니다`,costCenterUpdated:`비용 센터를 업데이트했습니다`,costCenterUpdateFailed:`비용 센터를 업데이트하지 못했습니다`,confirmDeleteCostCenter:`비용 센터 "{{name}}"을(를) 삭제하시겠습니까?`,costCenterDeleted:`비용 센터를 삭제했습니다`,costCenterDeleteFailed:`비용 센터를 삭제하지 못했습니다`,deleteTransactionConfirm:`이 거래를 삭제하시겠습니까? 잔액은 자동으로 다시 계산됩니다.`,deposit:`입금`,withdraw:`출금`,printCharge:`인쇄 비용`,deleteTransaction:`거래 삭제`},printers:{title:`프린터`,addPrinter:`프린터 추가`,editPrinter:`프린터 편집`,deletePrinter:`프린터 삭제`,printerName:`프린터 이름`,serialNumber:`일련번호`,ipAddress:`IP 주소 / 호스트명`,accessCode:`액세스 코드`,model:`모델`,nozzleCount:`노즐 수`,autoArchive:`자동 아카이브`,status:{available:`사용 가능`,idle:`대기 중`,printing:`인쇄 중`,paused:`일시정지`,offline:`오프라인`,problem:`문제 발생`,error:`오류`,finished:`완료`,unknown:`알 수 없음`},temperatures:{nozzle:`노즐`,bed:`베드`,chamber:`챔버`},heaterHistory:{title:`히터 기록`,openLabel:`히터 기록 보기`,nozzle:`노즐`,nozzle2:`노즐 2`,bed:`베드`,chamber:`챔버`,error:`기록을 불러올 수 없습니다`,empty:`아직 기록된 데이터가 없습니다`},progress:`{{percent}}% 완료`,timeRemaining:`{{time}} 남음`,deleteConfirm:`"{{name}}"을(를) 삭제하시겠습니까?`,maintenanceOk:`유지보수 정상`,maintenanceWarning:`{{count}}개 경고`,maintenanceWarning_plural:`{{count}}개 경고`,maintenanceDue:`{{count}}개 예정`,maintenanceDue_plural:`{{count}}개 예정`,sort:{name:`이름`,status:`상태`,model:`모델`,location:`위치`,eta:`남은 시간`,ascending:`오름차순 정렬`,descending:`내림차순 정렬`},cardSize:{small:`작은 카드`,medium:`중간 카드`,large:`큰 카드`,extraLarge:`아주 큰 카드`},pageView:{openCamWallPage:`카메라 월을 페이지로 열기`,cards:`카드`,camWall:`카메라 월`},camWall:{page:{tokenRejected:`이 카메라 월 링크는 더 이상 유효하지 않습니다. 토큰이 만료되었거나 취소되었을 수 있습니다.`,loadFailed:`프린터를 불러오지 못했습니다.`},noPrinters:`표시할 프린터가 없습니다`,noSignal:`신호 없음`,live:`라이브`,snap:`스냅`,off:`꺼짐`,summary:`라이브 {{live}}개, 스냅 {{snap}}개, 총 {{total}}개`,layer:`레이어 {{cur}}/{{total}}`,timeLeft:`{{time}} 남음`,statusMode:{off:`꺼짐`,compact:`간단`,full:`전체`},settings:{title:`카메라 월 설정`,maxLive:`최대 라이브 스트림`,maxLiveHint:`동시에 라이브 스트리밍할 타일 수. 나머지는 스냅샷으로 갱신됩니다.`,snapshotInterval:`스냅샷 간격(초)`,snapshotIntervalHint:`비라이브 타일이 새 스냅샷을 가져오는 주기.`,statusOverlay:`상태 표시`,statusOverlayHint:`간단: 상태 배지만 표시. 전체: + 진행률, 레이어, 남은 시간.`}},hideOffline:`오프라인 숨기기`,nextAvailable:`다음 가용`,powerOn:`전원 켜기`,offlinePrintersWithPlugs:`스마트 플러그가 연결된 오프라인 프린터`,noPrintersConfigured:`아직 설정된 프린터가 없습니다`,search:`프린터 검색...`,noSearchResults:`검색 또는 필터 조건에 맞는 프린터가 없습니다`,filter:{allStatuses:`모든 상태`,allLocations:`모든 위치`},toolbar:{filters:`필터`,view:`보기`,actions:`작업`},readyToPrint:`인쇄 준비 완료`,external:`외부`,extL:`외부-L`,extR:`외부-R`,deleteArchives:`인쇄 아카이브 삭제`,noLabel:`라벨 없음`,printPreview:`인쇄 미리보기`,width:`너비`,height:`높이`,noObjectsFound:`객체를 찾을 수 없습니다`,objectsLoadedOnPrintStart:`인쇄 시작 시 객체가 로드됩니다`,willBeSkipped:`건너뛸 예정`,name:`이름`,serialCannotBeChanged:`일련번호는 변경할 수 없습니다`,locationHelp:`프린터 그룹화 및 대기열 작업 필터링에 사용됩니다`,wifiSignal:{veryWeak:`매우 약함`,weak:`약함`,fair:`보통`,good:`좋음`,excellent:`매우 좋음`},maintenanceUpToDate:`모든 유지보수 최신 상태 - 클릭하여 보기`,maintenance:{title:`유지보수 중`,subtitle:`이 프린터는 일시 중지되었습니다 — 연결되지 않음, 대기열에서 제외, 알림 전송 안 함.`,pillLabel:`유지보수`,exitButton:`유지보수 종료`,menuEnter:`유지보수 모드로 전환`,menuExit:`유지보수 모드 종료`,toastEntered:`{{name}} 은(는) 이제 유지보수 모드입니다`,toastExited:`{{name}} 이(가) 다시 온라인 상태입니다`,confirmMidPrintTitle:`인쇄 중 유지보수 모드로 전환하시겠습니까?`,confirmMidPrintMessage:`{{name}} 은(는) 현재 인쇄 중입니다. 유지보수 모드로 전환하면 MQTT가 연결 해제되고 이 작업의 진행률 추적 및 완료 알림이 중지됩니다. 계속하시겠습니까?`,editFieldLabel:`유지보수 모드`,editFieldHelp:`활성화하면 이 프린터는 MQTT, 대기열 디스패치 및 알림에서 일시 중지됩니다 — 수리, 병렬 Bambuddy 설치 또는 임시 중지에 유용합니다.`},chamberLightOn:`챔버 조명 켜기`,chamberLightOff:`챔버 조명 끄기`,files:`파일`,browseFiles:`프린터 파일 탐색`,autoOffAfterPrint:`인쇄 후 자동 전원 끄기`,autoOffExecuted:`자동 끄기 실행됨 - 초기화하려면 프린터를 켜세요`,hmsErrors:`HMS 오류`,viewHmsErrors:`{{count}}개 HMS 오류 보기`,resume:`재개`,pause:`일시정지`,stop:`정지`,camera:`카메라`,skipObject:`객체 건너뛰기`,reconnect:`재연결`,forceRefresh:`강제 새로고침`,forceRefreshSuccess:`새로고침 요청됨`,mqttDebug:`MQTT 디버그`,printerInformation:`프린터 정보`,copyToClipboard:`복사`,copied:`복사됨!`,state:`상태`,wifiSignalLabel:`WiFi 신호`,developerMode:`개발자 모드`,enabled:`활성화됨`,disabled:`비활성화됨`,addedOn:`추가됨`,sdCard:`SD 카드`,inserted:`삽입됨`,notInserted:`삽입되지 않음`,totalPrintHours:`인쇄 시간`,activeNozzle:`활성: {{nozzle}} 노즐`,amsSwitchInletTooltip:`필라멘트 트랙 스위치 IN-{{inlet}}({{side}}) — 양쪽 노즐에 공급`,nozzleRack:`노즐 랙`,nozzleDocked:`도킹됨`,nozzleMounted:`장착됨`,nozzleActive:`활성`,nozzleIdle:`대기`,nozzleDiameter:`직경`,nozzleType:`유형`,nozzleStatus:`상태`,nozzleFilament:`필라멘트`,nozzleWear:`마모`,nozzleMaxTemp:`최대 온도`,nozzleSerial:`일련번호`,nozzleHardenedSteel:`경화강`,nozzleStainlessSteel:`스테인리스강`,nozzleTungstenCarbide:`텅스텐 카바이드`,nozzleFlow:`유량`,nozzleHighFlow:`고유량`,nozzleStandardFlow:`표준`,firmwareUpdate:`펌웨어 업데이트`,firmwareInstructions:`프린터 터치스크린에서`,firmwareNav:`이동`,settings:`설정`,firmware:`펌웨어`,discoverPrinters:`프린터 검색`,searching:`검색 중...`,manualEntry:`수동 입력`,addFromCloud:`클라우드에서 추가`,toast:{printerDeleted:`프린터가 삭제되었습니다`,missingSpoolAssignment:`{{printer}}에서 인쇄가 시작되었습니다. 슬롯 할당 누락: {{slots}}`,killSwitchTriggered:`결제 킬 스위치가 {{printer}}에서 승인되지 않은 인쇄를 중지했습니다: {{filename}}`,billingChargeFailed:`{{printer}}의 {{filename}} 결제에 실패했습니다. 예산 예약은 유지되었습니다. 서버 로그를 확인하세요.`,assignmentVerified:`슬롯 {{slot}}에 필라멘트가 로드되었습니다 ({{printer}})`,assignmentVerifiedNoKprofile:`{{printer}}의 슬롯 {{slot}}이(가) 로드되었지만 유량 보정 프로파일(K 프로파일)이 적용되지 않았습니다`,assignmentNotConfirmed:`{{printer}}의 슬롯 {{slot}} 할당을 확인할 수 없습니다. AMS 슬롯을 확인하세요`,printerAdded:`프린터가 추가되었습니다`,printerUpdated:`프린터가 업데이트되었습니다`,failedToDelete:`프린터 삭제 실패`,failedToAdd:`프린터 추가 실패`,failedToUpdate:`프린터 업데이트 실패`,commandSent:`명령이 전송되었습니다`,failedToSendCommand:`명령 전송 실패`,turnedOn:`{{name}} 켜짐`,failedToPowerOn:`{{name}} 전원 켜기 실패`,scriptTriggered:`스크립트가 실행되었습니다`,printStopped:`인쇄가 정지되었습니다`,printPaused:`인쇄가 일시정지되었습니다`,printResumed:`인쇄가 재개되었습니다`,referenceDeleted:`참조가 삭제되었습니다`,detectionAreaSaved:`감지 영역이 저장되었습니다`,failedToRunScript:`스크립트 실행 실패`,failedToStopPrint:`인쇄 정지 실패`,failedToPausePrint:`인쇄 일시정지 실패`,failedToResumePrint:`인쇄 재개 실패`,failedToControlChamberLight:`챔버 조명 제어 실패`,failedToSetSpeed:`인쇄 속도 설정 실패`,failedToUpdateSetting:`설정 업데이트 실패`,failedToSkipObjects:`객체 건너뛰기 실패`,failedToRereadRfid:`RFID 재읽기 실패`,failedToCheckPlate:`플레이트 확인 실패`,failedToUpdateLabel:`라벨 업데이트 실패`,failedToDeleteReference:`참조 삭제 실패`,failedToSaveDetectionArea:`감지 영역 저장 실패`,plateCheckEnabled:`플레이트 확인 활성화됨`,plateCheckDisabled:`플레이트 확인 비활성화됨`,calibrationSaved:`캘리브레이션이 저장되었습니다!`,calibrationFailed:`캘리브레이션 실패`,rfidRereadInitiated:`RFID 재읽기가 시작되었습니다`,loadInitiated:`필라멘트 로딩 중…`,unloadInitiated:`필라멘트 언로딩 중…`,failedToLoad:`필라멘트 로드 실패`,failedToUnload:`필라멘트 언로드 실패`,connectionFailedNotAdded:`프린터에 연결할 수 없습니다. IP, 시리얼 번호, 액세스 코드를 확인하고 LAN 전용 모드가 켜져 있는지 확인하세요. 프린터가 추가되지 않았습니다.`},connection:{connected:`연결됨`,offline:`오프라인`},plateStatus:{markCleared:`플레이트 비움으로 표시`,cleared:`플레이트 비워짐`,notCleared:`플레이트 미비움`,inUse:`플레이트 사용 중`},queue:{inQueue:`대기열에 {{count}}개`,inQueue_plural:`대기열에 {{count}}개`},controls:`제어`,rfid:{reread:`RFID 재읽기`},ams:{load:`로드`,unload:`언로드`,feedTitle:`{{slot}}을(를) 어느 노즐로 로드할까요?`,feedPrompt:`Filament Track Switch는 이 슬롯을 양쪽 핫엔드로 보낼 수 있습니다. 공급할 쪽을 선택하세요.`,feedLeft:`왼쪽 노즐`,feedRight:`오른쪽 노즐`,feedAlreadyLoaded:`이미 로드됨`,switchNotReady:`Filament Track Switch가 아직 설정되지 않았습니다. 프린터에서 각 AMS를 입구에 할당한 뒤 다시 시도하세요.`},bedJog:{limitWarning:`수동 이동 중에는 이동 한계가 적용되지 않습니다. Bambu 펌웨어 버그로 인해 원격 명령에서는 소프트웨어 엔드스톱이 무시됩니다. 충돌하지 않도록 주의해서 이동하세요.`,title:`조그 컨트롤`,bed:`베드`,step:`이동 거리 (mm)`,up:`플레이트 위로`,down:`플레이트 아래로`,toolheadUp:`툴헤드 위로`,toolheadDown:`툴헤드 아래로`,disabledWhilePrinting:`인쇄 중 비활성화됨`,notHomedTitle:`프린터 홈 설정 필요`,notHomedMessage:`마지막 인쇄 이후 홈 설정이 되지 않았습니다. 안전한 위치 지정을 위해 자동 홈 설정을 먼저 실행하거나, 그냥 이동하세요 — 소프트 엔드스톱이 무시됩니다.`,homeZ:`자동 홈 설정`,moveAnyway:`그냥 이동`,homingStarted:`프린터 자동 홈 설정 중…`},permission:{noAdd:`프린터를 추가할 권한이 없습니다`,noEdit:`프린터를 편집할 권한이 없습니다`,noDelete:`프린터를 삭제할 권한이 없습니다`,noControl:`프린터를 제어할 권한이 없습니다`,noFiles:`프린터 파일에 접근할 권한이 없습니다`,noAmsRfid:`AMS RFID를 재읽기할 권한이 없습니다`,noSmartPlugControl:`스마트 플러그를 제어할 권한이 없습니다`,noCamera:`카메라를 볼 권한이 없습니다`},modal:{addTitle:`프린터 추가`,editTitle:`프린터 편집`,myPrinter:`내 프린터`,selectModel:`모델 선택...`,locationGroup:`위치 / 그룹 (선택사항)`,locationPlaceholder:`예: 작업실, 사무실, 지하실`,autoArchiveLabel:`완료된 인쇄 자동 아카이브`,fromPrinterSettings:`프린터 설정에서`,modelOptional:`모델 (선택사항)`,saveChanges:`변경사항 저장`},skipObjects:{tooltip:`객체 건너뛰기`,onlyWhilePrinting:`객체 건너뛰기 (인쇄 중에만)`,requiresMultiple:`객체 건너뛰기 (2개 이상 필요)`,title:`객체 건너뛰기`,matchIdsInfo:`프린터 화면의 ID와 일치`,printerShowsIds:`프린터 화면에서 빌드 플레이트의 객체 ID를 표시합니다`,skipSelected:`선택 항목 건너뛰기`,skipping:`건너뛰는 중...`,noObjectsSelected:`선택된 객체 없음`,selectObjectsToSkip:`현재 인쇄에서 건너뛸 객체를 선택하세요`,skipped:`건너뜀`,objectsSkipped:`객체가 건너뛰어졌습니다`,activeCount:`{{count}}개 활성`,waitForLayer:`객체를 건너뛰려면 2층 이상을 기다리세요 (현재 {{layer}}층)`,skip:`건너뛰기`,confirmTitle:`객체를 건너뛰시겠습니까?`,confirmMessage:`"{{name}}"을(를) 건너뛰시겠습니까? 이 작업은 취소할 수 없습니다.`,confirmAllMessage:`남아 있는 모든 개체가 선택되었습니다. 인쇄 작업이 중지됩니다. 계속하시겠습니까?`,confirmMultipleMessage:`선택한 {{count}}개의 객체를 건너뛰시겠습니까? 이 작업은 취소할 수 없습니다.`},confirm:{deleteTitle:`프린터 삭제`,deleteMessage:`"{{name}}"을(를) 삭제하시겠습니까? 모든 연결 설정이 제거됩니다.`,deleteArchivesNote:`이 프린터의 모든 인쇄 기록이 영구적으로 삭제됩니다.`,keepArchivesNote:`인쇄 기록은 유지되지만 이 프린터와 연결이 해제됩니다.`,stopTitle:`인쇄 정지`,stopMessage:`"{{name}}"의 현재 인쇄를 정지하시겠습니까? 인쇄 작업이 취소됩니다.`,stopButton:`인쇄 정지`,pauseTitle:`인쇄 일시정지`,pauseMessage:`"{{name}}"의 현재 인쇄를 일시정지하시겠습니까?`,pauseButton:`인쇄 일시정지`,resumeTitle:`인쇄 재개`,resumeMessage:`"{{name}}"의 인쇄를 재개하시겠습니까?`,resumeButton:`인쇄 재개`,powerOnTitle:`프린터 전원 켜기`,powerOnMessage:`"{{name}}"의 전원을 켜시겠습니까?`,powerOnButton:`전원 켜기`,powerOffTitle:`프린터 전원 끄기`,powerOffMessage:`"{{name}}"의 전원을 끄시겠습니까?`,powerOffWarning:`경고: "{{name}}"이(가) 현재 인쇄 중입니다! 전원을 끄시겠습니까? 인쇄가 중단되고 프린터가 손상될 수 있습니다.`,powerOffButton:`전원 끄기`,haToggleTitle:`"{{name}}" 토글`,haToggleMessage:`Home Assistant 엔티티 {{entity}}를 토글하시겠습니까? 현재 켜져 있으면 전원이 꺼질 수 있습니다.`,haToggleWarning:`경고: "{{name}}"이(가) 현재 인쇄 중입니다! {{entity}}를 토글하면 전원이 차단되어 인쇄가 중단될 수 있습니다. 계속하시겠습니까?`,haToggleButton:`토글`},bulk:{select:`선택`,selectAll:`전체 선택`,selectByLocation:`위치별 선택`,selected:`{{count}}개 선택됨`,actions:{stop:`정지`,pause:`일시정지`,resume:`재개`,clearPlate:`베드 비우기`,clearHMS:`알림 지우기`},confirm:{stopTitle:`{{count}}개 인쇄 정지`,stopMessage:`{{count}}개 프린터의 활성 인쇄를 취소합니다. 이 작업은 취소할 수 없습니다.`,stopButton:`모두 정지`,pauseTitle:`{{count}}개 인쇄 일시정지`,pauseMessage:`{{count}}개 프린터의 활성 인쇄를 일시정지합니다.`,pauseButton:`모두 일시정지`,clearPlateTitle:`{{count}}개 인쇄 베드 비우기`,clearPlateMessage:`{{count}}개 프린터의 인쇄 베드를 비우고 대기열 작업을 시작할 수 있습니다.`,clearPlateButton:`모두 비우기`},success:`{{count}}개 프린터에서 {{action}} 완료`,partial:`{{succeeded}}개 성공, {{failed}}개 실패`,noneApplicable:`선택된 프린터 중 이 작업에 적합한 상태의 프린터가 없습니다`,selectByState:`상태별 선택`},discovery:{title:`프린터 검색`,searching:`검색 중...`,scanning:`스캔 중...`,scanProgress:`스캔 중... {{scanned}}/{{total}}`,foundPrinters:`{{count}}개 프린터 발견`,noPrintersFound:`프린터를 찾을 수 없습니다`,noPrintersFoundSubnet:`지정된 서브넷에서 프린터를 찾을 수 없습니다.`,noPrintersFoundNetwork:`네트워크에서 프린터를 찾을 수 없습니다.`,allConfigured:`검색된 모든 프린터가 이미 설정되어 있습니다.`,alreadyAdded:`이미 추가됨`,select:`선택`,manualEntry:`수동 입력`,addFromCloud:`클라우드에서 추가`,subnetToScan:`스캔할 서브넷`,dockerNote:`Docker가 감지되었습니다. CIDR 표기법으로 프린터의 서브넷을 입력하세요. docker-compose.yml에 network_mode: host가 필요합니다.`,scanSubnet:`서브넷에서 프린터 스캔`,discoverNetwork:`네트워크에서 프린터 검색`,scanningSubnet:`Bambu 프린터를 위해 서브넷 스캔 중...`,scanningNetwork:`네트워크 스캔 중...`,serialRequired:`일련번호 필수`,unknown:`알 수 없음`,failedToStart:`검색 시작 실패`,customSubnetOption:`사용자 지정 서브넷...`,customSubnetLabel:`사용자 지정 서브넷 (CIDR)`,customSubnetNote:`프린터가 이 서버와 다른 네트워크에 있는 경우 사용자 지정 서브넷을 사용하세요. FTP (990) 및 MQTT (8883) 포트가 라우팅 경계를 통해 접근 가능해야 합니다.`},drying:{start:`건조 시작`,stop:`건조 정지`,temperature:`온도`,duration:`시간`,hours:`시간`,timeRemaining:`{{time}} 남음`,active:`건조 중`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`건조 지원 안 됨`,powerRequired:`건조를 활성화하려면 AMS 전원 어댑터를 연결하세요`,cannotDryNow:`AMS가 지금은 건조를 시작할 수 없습니다`,startingDrying:`건조 시작 중...`,toastCommandSent:`건조 명령을 전송했습니다`,toastStopped:`건조를 중지했습니다`,toastNotStarted:`프린터가 명령을 수락했지만 AMS가 건조를 시작하지 않았습니다. AMS 전원 어댑터가 연결되어 있는지, 프린터가 대기 상태인지 확인하십시오.`,screenOnly:`이 프린터에서는 AMS 건조를 프린터 자체 화면에서만 제어할 수 있습니다 (Bambu 제한 사항)`,stoppingDrying:`건조 정지 중...`,rotateTray:`건조 중 스풀 회전`,rotateUnavailableReason:`사용할 수 없음 — 이 AMS의 슬롯이 툴헤드로 로드되어 있습니다. 스풀이 공급 튜브에 의해 고정되어 회전할 수 없습니다. 먼저 필라멘트를 뺀 후 다시 시도하십시오.`,startMode:`시작 시간`,modeNow:`지금`,modeDelay:`지연 후`,modeAtTime:`시각 지정`,schedule:`예약하기`,scheduledFor:`건조 예약: {{time}}`,scheduledAsap:`건조 예약됨 (프린터 대기 중)`,cancelScheduled:`예약된 건조 취소`,scheduleFailed:`건조 예약에 실패했습니다`,retractFilament:`건조를 시작하려면 AMS 출구의 필라멘트를 빼내세요`,waitingAmsNotFound:`AMS 감지를 기다리는 중`,waitingOffline:`프린터가 온라인 상태가 되기를 기다리는 중`,waitingPrinterBusy:`프린터가 사용 가능해지기를 기다리는 중`,waitingAlreadyDrying:`현재 건조 주기가 끝나기를 기다리는 중`,waitingInterrupted:`중단됨, 프린터가 사용 가능해지면 다시 시작됩니다`,scheduleFailedReason:`예약된 건조에 실패했습니다: {{reason}}`,scheduleFailedUnknown:`알 수 없는 오류`,dismissFailed:`닫기`},amsBackup:{titleOn:`AMS 필라멘트 백업이 켜져 있습니다. 비활성화하려면 클릭하세요.`,titleOff:`AMS 필라멘트 백업이 꺼져 있습니다. 활성화하려면 클릭하세요.`,titleUnknown:`이 프린터에서는 AMS 필라멘트 백업 상태를 확인할 수 없습니다.`,toastEnabled:`AMS 필라멘트 백업이 활성화되었습니다`,toastDisabled:`AMS 필라멘트 백업이 비활성화되었습니다`,modalTitle:`AMS 필라멘트 백업`,modalHelp:`활성 슬롯이 소진되면 프린터는 같은 프리셋과 색상의 슬롯을 이 순서로 순환합니다.`,modalNoSlots:`필라멘트가 로드되지 않았습니다.`,modalNoPairs:`백업 쌍이 없습니다 — 프리셋과 색상이 모두 일치하는 슬롯이 없습니다.`,extruderRightShort:`우`,extruderLeftShort:`좌`,stateOn:`활성화됨`,stateOff:`비활성화됨`,stateUnknown:`이 프린터에서 지원되지 않음`},activeJobSlot:{title:`이 슬롯은 활성 인쇄의 필라멘트 {{n}}입니다`,ariaLabel:`활성 인쇄 슬롯 {{n}}`},expectedSlot:{title:`프린터가 이 슬롯의 필라멘트를 기다리고 있습니다`,ariaLabel:`요청된 필라멘트 슬롯 {{n}}`,label:`{{ams}} · 슬롯 {{slot}}`,external:`외부 스풀`},filaments:`필라멘트`,externalSpool:{hide:`외부 스풀 숨기기`,show:`외부 스풀 표시`},openCameraOverlay:`카메라 오버레이 열기`,openCameraWindow:`새 창에서 카메라 열기`,firmwareUpdateAvailable:`펌웨어 업데이트 가능: {{current}} → {{latest}}`,firmwareUpToDate:`펌웨어 {{version}} — 최신 상태`,firmwareUpdateButton:`업데이트`,plateDetection:{noPermission:`프린터를 업데이트할 권한이 없습니다`,enabledClick:`플레이트 확인 활성화됨 - 클릭하여 비활성화`,disabledClick:`플레이트 확인 비활성화됨 - 클릭하여 활성화`,manageCalibration:`플레이트 감지 캘리브레이션 관리`,calibrationRequired:`캘리브레이션 필요`,calibrationInstructions:`빌드 플레이트가 <strong>완전히 비어 있는지</strong> 확인한 후 캘리브레이션을 클릭하세요.`,calibrationDescription:`캘리브레이션은 빈 플레이트의 참조 이미지를 캡처합니다. 이후 확인 시 이 참조와 비교하여 객체를 감지합니다.`,calibrationTip:`<strong>팁:</strong> 다른 플레이트에 대해 최대 5개의 캘리브레이션을 저장할 수 있습니다. 확인 시 시스템이 자동으로 가장 잘 맞는 것을 사용합니다.`,plateEmpty:`플레이트가 비어 있는 것으로 보입니다`,objectsDetected:`플레이트에 객체가 감지되었습니다`,confidence:`신뢰도`,difference:`차이`,analysisPreview:`분석 미리보기:`,analysisLegend:`초록 박스 = 감지 영역, 빨간 오버레이 = 캘리브레이션과의 차이`,savedReferences:`저장된 참조 ({{count}}/{{max}})`,deleteReference:`참조 삭제`,labelPlaceholder:`라벨...`,clickToEdit:`{{label}} - 클릭하여 편집`,clickToAddLabel:`클릭하여 라벨 추가`},speed:{title:`인쇄 속도`,silent:`조용함 (50%)`,standard:`표준 (100%)`,sport:`스포츠 (124%)`,ludicrous:`루디크러스 (166%)`},airduct:{title:`에어덕트 모드`,cooling:`냉각`,heating:`가열`},noSdCard:`SD 없음`,door:{open:`열림`,closed:`닫힘`},fans:{partCooling:`파트 냉각 팬`,auxiliary:`보조 팬`,leftAuxiliary:`왼쪽 보조 팬`,exhaust:`배기`,chamber:`챔버 팬`},clickToViewHmsErrors:`HMS 오류 보기 클릭`,aiDetection:{safe:`안전`,warning:`경고`,failure:`실패`,idle:`대기 중`,error:`확인 안 함`,unknown:`시작 중`,tooltipError:`AI 실패 감지가 이 인쇄를 확인하고 있지 않습니다: {{reason}} - 클릭하여 자세히 보기`,tooltipUnknown:`AI 실패 감지: 첫 번째 결과를 기다리는 중 - 클릭하여 자세히 보기`,errorHint:`이 인쇄는 확인되고 있지 않습니다. 아래 문제가 해결되면 감지가 자동으로 재개됩니다.`,tooltip:`AI 실패 감지: {{status}} (점수 {{score}}) - 클릭하여 자세히 보기`,tooltipIdle:`AI 실패 감지 활성화됨 - 다음 인쇄부터 모니터링을 시작합니다 - 클릭하여 자세히 보기`,modalTitle:`AI 실패 감지 - {{name}}`,currentStatus:`상태`,score:`점수`,framesAnalyzed:`분석된 프레임`,idleHint:`현재 모니터링 중인 인쇄가 없습니다. 다음 인쇄부터 자동으로 모니터링을 시작합니다.`,lastError:`마지막 오류`,openSettings:`설정 열기`},estimatedCompletion:`예상 완료 시간`,plateNumber:`플레이트 {{number}}`,slotOptions:`슬롯 옵션`,amsPopup:{friendlyName:`AMS 이름`,friendlyNamePlaceholder:`예: AMS 친숙한 이름`,serialNumber:`일련번호`,firmwareVersion:`펌웨어`,save:`저장`,clear:`지우기`,noEditPermission:`AMS 유닛 이름을 변경할 권한이 없습니다`},firmwareModal:{title:`펌웨어 업데이트`,titleUpToDate:`펌웨어 정보`,currentVersion:`현재:`,latestVersion:`최신:`,releaseNotes:`릴리스 노트`,checkingPrereqs:`전제 조건 확인 중...`,sdCardReady:`SD 카드 준비됨. 아래를 클릭하여 펌웨어를 업로드하세요.`,uploadedSuccess:`SD 카드에 펌웨어가 업로드되었습니다!`,applyInstructions:`프린터에서 업데이트를 적용하려면:`,step1:`프린터 터치스크린에서 <strong>설정</strong>으로 이동하세요`,step2:`<strong>펌웨어</strong>로 이동하세요`,step3:`<strong>SD 카드에서 업데이트</strong>를 선택하세요`,step4:`업데이트에 10-20분이 소요됩니다`,done:`완료`,starting:`시작 중...`,uploadFirmware:`펌웨어 업로드`,uploadFailed:`업로드 시작 실패: {{error}}`,uploadedToast:`펌웨어 업로드됨! 프린터 화면에서 업데이트를 시작하세요.`,availableVersions:`사용 가능한 버전`,usable:`사용 가능`,unavailable:`사용 불가`,installed:`설치됨`,newerBadge:`최신`,olderBadge:`이전`,currentBadge:`현재`},accessCodePlaceholder:`현재 값을 유지하려면 비워두세요`,roi:{title:`감지 영역 (ROI)`,xStart:`X 시작`,yStart:`Y 시작`,width:`너비`,height:`높이`,instruction:`빌드 플레이트에 집중할 감지 영역을 조정하세요. 미리보기의 초록 박스가 현재 영역을 표시합니다.`},developerModeWarning:`개발자 LAN 모드가 활성화되지 않음: {{names}}. 일부 기능이 작동하지 않을 수 있습니다.`,howToEnable:`활성화 방법`,incompatibleFile:`이 파일은 {{slicedFor}}용으로 슬라이싱되었지만, 이 프린터는 {{printerModel}}입니다`,dropNotPrintable:`.gcode 및 .gcode.3mf 파일만 인쇄할 수 있습니다`,dropToPrint:`놓아서 인쇄`,dropToQueue:`놓아서 대기열에 추가`,addPreflight:{checking:`연결 확인 중...`,warning:`일부 연결 확인이 실패했습니다. 이 프린터가 오프라인으로 표시될 수 있습니다. 아래 항목을 검토하고 수정하거나 그냥 저장하세요.`,back:`뒤로`,saveAnyway:`그냥 저장`}},archives:{media:{title:`출력 동영상`,download:`출력 동영상 다운로드`,searching:`프린터에서 동영상을 확인하는 중…`,searchFailed:`프린터에서 동영상을 확인할 수 없습니다.`,none:`이 출력의 타임랩스 또는 IP 카메라 영상 조각을 찾지 못했습니다.`,attachedTimelapse:`첨부된 타임랩스`,printerFiles:`프린터에 남아 있는 파일`,downloadSelected:`선택 항목 다운로드`,printerMissing:`프린터가 더 이상 구성되어 있지 않습니다`,timelapseUnavailable:`타임랩스 디렉터리를 읽을 수 없습니다`,ipcamUnavailable:`IP 카메라 디렉터리를 읽을 수 없습니다`},title:`인쇄 아카이브`,no3mfBanner:{title:`최근 일부 인쇄가 썸네일과 함께 아카이브되지 않았습니다`,body:`슬라이서가 프린터의 SD 카드에 .gcode.3mf 파일을 남기지 않아서 Bambuddy가 썸네일이나 슬라이서 메타데이터를 가져올 수 없었습니다. 일반적으로 슬라이서 (Bambu Studio / OrcaSlicer 장치 탭)에서 "전송된 파일을 외부 저장소에 저장"이 꺼져 있을 때 발생합니다.`,docsLink:`설치 단계 4 보기`,docsLinkInternalStorage:`왜 이런 일이 생기나요`,titleInternalStorage:`최근 일부 출력물이 프린터 내부 저장소에 남았습니다`,bodyInternalStorage:`슬라이싱된 파일을 Bambu Studio가 카드가 아니라 프린터 내부 저장소에 저장해서 Bambuddy가 FTP로 읽을 것이 없었습니다. H2 시리즈, P2S, X2D에서는 «인쇄» 버튼이 항상 그렇게 동작하며, 선택할 수 있는 것은 «보내기»뿐인데 그것도 기본값이 «캐시»입니다. 해당 출력물은 이름과 시간과 함께 계속 보관되지만 썸네일과 슬라이서 메타데이터는 없습니다. 완전한 기록을 남기려면 Bambuddy에서 출력을 시작하거나 OrcaSlicer로 슬라이싱하세요. Bambu Studio를 쓴다면 «보내기»에서 «외부 저장소»를 고른 뒤 출력을 시작하면 됩니다. 모두 프린터에 카드나 USB 메모리가 필요합니다.`,titleNoExternalStorage:`최근 일부 출력물을 보관하지 못했습니다 — 프린터에 저장소가 없습니다`,bodyNoExternalStorage:`프린터 슬롯에 카드도 USB도 감지되지 않아 슬라이싱된 파일이 저장될 곳이 없었고 Bambuddy가 읽을 것도 없었습니다. 하나 넣으면 다음 출력물은 온전히 보관됩니다.`,titleInternalHistory:`최근 일부 출력물은 이미 프린터에 있던 파일에서 시작되었습니다`,bodyInternalHistory:`해당 출력물은 프린터 자체 라이브러리에서 실행되었습니다 — 화면에서의 재출력, Handy에서의 시작, 또는 이전에 보내 두고 나중에 출력한 파일입니다. Bambuddy는 출력 파일을 FTP로 읽는데 FTP는 카드나 USB만 제공하고, 프린터는 그 라이브러리를 FTP가 닿지 않는 영역에 보관하므로 읽을 3MF가 없었습니다. 이 출력물들은 아무것도 전송되지 않았으므로 슬라이서 설정으로는 해결되지 않습니다. 이름과 시간과 함께 계속 보관되며, "아카이브 편집"에서 사용된 필라멘트를 직접 입력할 수 있습니다. 온전한 보관을 원하면 Bambuddy나 슬라이서에서 출력을 시작하세요.`,titleFtpsCooloff:`최근 일부 출력물을 보관하지 못했습니다 — 프린터가 파일 연결을 거부했습니다`,bodyFtpsCooloff:`Bambuddy가 프린터의 파일 전송 포트(FTPS 990)를 열었으나 프린터가 TLS가 아닌 것으로 응답해 아무것도 읽을 수 없었습니다. 해당 출력물은 이름과 시간과 함께 보관되지만 미리보기와 슬라이서 메타데이터는 없습니다. 이는 슬라이서 설정 문제도, 사용자가 바꾼 것도 아닙니다. 같은 모델과 같은 펌웨어가 다른 설치 환경에서는 정상 동작하며, 문제가 생긴 프린터도 대개 나중에 저절로 다시 동작합니다. 이런 실패 후 Bambuddy는 해당 프린터로의 전송을 5분간 멈추고, 그 후 파일을 다시 가지러 갑니다. 짧은 문제라면 스스로 채워지고, 카드가 계속 비어 있다면 거부가 재시도보다 오래 지속되었다는 뜻입니다. 무엇이 원인인지는 아직 밝혀지지 않았습니다. 반복된다면 시스템 페이지에서 디버그 로깅을 켠 뒤 지원 번들을 보고에 첨부해 주세요.`,titleFtpTransferFailed:`최근 일부 출력을 보관하지 못했습니다 — 파일 전송이 시간 내에 끝나지 않았습니다`,bodyFtpTransferFailed:`슬라이싱된 파일은 프린터 카드에 있었고 프린터도 실제로 전송을 시작했지만, 허용된 시간 안에 전송이 끝나지 않았습니다. 출력 시작 시점의 프린터는 카메라와 상태 메시지, 작업 업로드까지 함께 처리하고 있어서 큰 3MF 파일은 그 사이를 통과하지 못할 때가 있습니다. 해당 출력은 이름과 시간과 함께 보관되어 있고, 썸네일과 슬라이서 정보만 없습니다. 슬라이서 설정 문제도 아니고 사용자가 바꾼 것 때문도 아닙니다. Bambuddy가 이후 10분 동안 파일을 세 번 더 가지러 가므로 대부분은 저절로 채워집니다. 카드가 계속 비어 있다면 그 시도들도 모두 시간 내에 끝나지 않았다는 뜻입니다. 계속 발생하면 설정 > 네트워크 > FTP 재시도 의 연결 제한 시간을 늘리세요.`,dismissLabel:`이 알림 닫기`},searchPlaceholder:`아카이브 검색...`,filterByPrinter:`프린터별 필터`,filterByStatus:`상태별 필터`,sortBy:`정렬 기준`,sortNewest:`최신순`,sortOldest:`오래된순`,sortName:`이름`,sortDuration:`시간`,sortLargest:`큰 것 먼저`,sortSmallest:`작은 것 먼저`,sortSize:`크기`,noArchives:`아카이브를 찾을 수 없습니다`,noArchivesSearch:`검색 조건에 맞는 아카이브가 없습니다`,originalPrintNotVisible:`원본 인쇄가 보이지 않음 - 필터를 지워보세요`,noArchivesYet:`아직 아카이브가 없습니다`,prints:`인쇄`,pagination:{showing:`표시 중`,to:`~`,of:`/`,show:`표시`,page:`페이지`,all:`전체`},loadingArchives:`아카이브 로딩 중...`,releaseToUpload:`놓아서 업로드`,showAll:`모두 보기`,showFavoritesOnly:`즐겨찾기만 보기`,gridView:`그리드 보기`,listView:`목록 보기`,calendarView:`달력 보기`,logView:`인쇄 로그`,manageTags:`태그 관리`,showFailedPrints:`실패한 인쇄 표시`,hideFailedPrints:`실패한 인쇄 숨기기`,hideDuplicates:`중복 숨기기`,viewOriginalPrint:`원본 인쇄 보기 클릭 (#{{id}})`,printTime:`인쇄 시간`,filamentUsed:`사용된 필라멘트`,cost:`비용`,preview:`미리보기`,deleteArchive:`아카이브 삭제`,deleteConfirm:`이 아카이브를 삭제하시겠습니까?`,favorite:`즐겨찾기`,unfavorite:`즐겨찾기에서 제거`,viewDetails:`상세 보기`,status:{completed:`완료`,failed:`실패`,stopped:`정지됨`},toast:{source3mfAttached:`소스 3MF 첨부됨: {{filename}}`,failedUploadSource3mf:`소스 3MF 업로드 실패`,source3mfRemoved:`소스 3MF 제거됨`,failedRemoveSource3mf:`소스 3MF 제거 실패`,f3dAttached:`F3D 첨부됨: {{filename}}`,failedUploadF3d:`F3D 업로드 실패`,f3dRemoved:`F3D 제거됨`,failedRemoveF3d:`F3D 제거 실패`,timelapseAttached:`타임랩스 첨부됨: {{filename}}`,timelapseAlreadyAttached:`타임랩스가 이미 첨부됨`,noMatchingTimelapse:`일치하는 타임랩스를 찾을 수 없습니다`,failedScanTimelapse:`타임랩스 스캔 실패`,failedAttachTimelapse:`타임랩스 첨부 실패`,timelapseRemoved:`타임랩스 제거됨`,failedRemoveTimelapse:`타임랩스 제거 실패`,timelapseUploaded:`타임랩스 업로드됨: {{filename}}`,failedUploadTimelapse:`타임랩스 업로드 실패`,archiveDeleted:`아카이브가 삭제되었습니다`,failedDeleteArchive:`아카이브 삭제 실패`,addedToFavorites:`즐겨찾기에 추가됨`,removedFromFavorites:`즐겨찾기에서 제거됨`,projectUpdated:`프로젝트가 업데이트되었습니다`,failedUpdateProject:`프로젝트 업데이트 실패`,linkCopied:`링크가 클립보드에 복사되었습니다`,failedCopyLink:`링크 복사 실패`,photoDeleted:`사진이 삭제되었습니다`,failedDeletePhoto:`사진 삭제 실패`,failedDeleteArchives:`아카이브 삭제 실패`,failedUpdateFavorites:`즐겨찾기 업데이트 실패`,exportDownloaded:`내보내기 다운로드됨`,exportFailed:`내보내기 실패`},menu:{print:`인쇄`,openInBambuStudio:`슬라이서에서 열기`,slice:`슬라이스`,externalLink:`외부 링크`,viewOnMakerWorld:`MakerWorld에서 보기`,preview3d:`3D 미리보기`,viewTimelapse:`타임랩스 보기`,scanForTimelapse:`타임랩스 검색`,uploadTimelapse:`타임랩스 업로드`,removeTimelapse:`타임랩스 제거`,downloadSource3mf:`소스 3MF 다운로드`,uploadSource3mf:`소스 3MF 업로드`,replaceSource3mf:`소스 3MF 교체`,removeSource3mf:`소스 3MF 제거`,uploadF3d:`F3D 업로드`,replaceF3d:`F3D 교체`,downloadF3d:`F3D 다운로드`,removeF3d:`F3D 제거`,download:`다운로드`,copyDownloadLink:`다운로드 링크 복사`,qrCode:`QR 코드`,viewPhotos:`사진 보기`,viewPhotosCount:`사진 보기 ({{count}})`,projectPage:`프로젝트 페이지`,addToFavorites:`즐겨찾기에 추가`,removeFromFavorites:`즐겨찾기에서 제거`,edit:`편집`,goToProject:`프로젝트로 이동: {{name}}`,addToProject:`프로젝트에 추가`,removeFromProject:`프로젝트에서 제거`,loading:`로딩 중...`,noProjectsAvailable:`사용 가능한 프로젝트 없음`,searchProjects:`프로젝트 검색…`,select:`선택`,deselect:`선택 해제`,delete:`삭제`,printLog:`인쇄 기록`},permission:{noReprint:`이 아카이브를 재인쇄할 권한이 없습니다`,noAddToQueue:`대기열에 추가할 권한이 없습니다`,noUpdateArchives:`아카이브를 업데이트할 권한이 없습니다`,noUploadFiles:`파일을 업로드할 권한이 없습니다`,noDownload:`아카이브를 다운로드할 권한이 없습니다`,noCopyLink:`다운로드 링크를 복사할 권한이 없습니다`,noDelete:`이 아카이브를 삭제할 권한이 없습니다`,noEdit:`이 항목을 편집할 권한이 없습니다`,noCreate:`아카이브를 만들 권한이 없습니다`},platePicker:{title:`미리 볼 플레이트 선택`,hint:`이 아카이브에는 여러 플레이트가 있습니다. G코드 뷰어에서 열 플레이트를 선택하세요.`,plateLabel:`플레이트 {{index}}`,objectCount:`{{count}}개 객체`,objectCount_plural:`{{count}}개 객체`,noGcode:`이 아카이브에는 미리 볼 슬라이싱된 G코드가 없습니다. Bambu Studio에서 먼저 슬라이싱하세요.`},card:{previousPlate:`이전 플레이트`,nextPlate:`다음 플레이트`,plateNumber:`플레이트 {{index}}`,moreOptions:`더 많은 옵션은 우클릭`,addToFavorites:`즐겨찾기에 추가`,removeFromFavorites:`즐겨찾기에서 제거`,cancelled:`취소됨`,failed:`실패`,duplicate:`중복`,duplicateTitle:`이 모델은 이전에 인쇄된 적이 있습니다`,openSource3mf:`Bambu Studio에서 소스 3MF 열기 (더 많은 옵션은 우클릭)`,downloadF3d:`Fusion 360 디자인 파일 다운로드`,viewTimelapse:`타임랩스 보기`,viewPhoto:`사진 1장 보기`,viewPhotos:`사진 {{count}}장 보기`,openFolder:`폴더 열기: {{name}}`,slicedFile:`슬라이싱된 파일 - 인쇄 준비 완료`,sourceFile:`소스 파일만 - AMS 매핑 없음`,gcode:`GCODE`,source:`소스`,project:`프로젝트: {{name}}`,estimated:`예상: {{time}}`,actual:`실제: {{time}}`,accuracy:`정확도: {{percent}}%`,filament:`{{weight}}g`,layer:`{{count}}층`,layers:`{{count}}층`,object:`{{count}}개 객체`,objects:`{{count}}개 객체`,slicedFor:`{{model}}용으로 슬라이싱됨`,uploadedBy:`업로드한 사용자`,noPermissionReprint:`재인쇄 권한이 없습니다`,noFileForReprint:`3MF 파일 없음 — 인쇄 기록 시 프린터에서 파일을 다운로드할 수 없었습니다`,slicerAmsMapping:`AMS 매핑 저장됨({{printer}})`,slicerAmsMappingTooltip:`슬라이서가 선택한 AMS 슬롯이 {{printer}}용으로 저장되었습니다. 슬롯 번호는 해당 프린터에서만 의미가 있으므로, 다시 {{printer}}로 보낼 때만 재인쇄에서 재사용됩니다.`,noPermissionEdit:`아카이브를 편집할 권한이 없습니다`,noPermissionDelete:`아카이브를 삭제할 권한이 없습니다`,openInBambuStudio:`슬라이서에서 열기`,openInBambuStudioToSlice:`슬라이스하려면 슬라이서에서 열기`,slice:`슬라이스`,externalLink:`외부 링크`,makerWorld:`MakerWorld: {{designer}}`,viewProject:`프로젝트 보기`,noExternalLink:`외부 링크 없음`,preview3d:`3D 미리보기`,download:`다운로드`,edit:`편집`,delete:`삭제`,runsBadge:`{{count}}회 인쇄`,runsBadgeTitle:`총 {{count}}회 인쇄 — {{successful}}회 성공, {{failed}}회 실패. 전체 인쇄 기록을 보려면 클릭하세요.`},modal:{deleteArchive:`아카이브 삭제`,deleteConfirm:`"{{name}}"을(를) 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.`,deleteButton:`삭제`,removeSource3mf:`소스 3MF 제거`,removeSource3mfConfirm:`"{{name}}"에서 소스 3MF 파일을 제거하시겠습니까? 원본 슬라이서 프로젝트 파일이 삭제됩니다.`,removeButton:`제거`,removeF3d:`F3D 제거`,removeF3dConfirm:`"{{name}}"에서 Fusion 360 디자인 파일을 제거하시겠습니까?`,removeTimelapse:`타임랩스 제거`,removeTimelapseConfirm:`"{{name}}"에서 타임랩스 영상을 제거하시겠습니까?`,timelapse:`{{name}} - 타임랩스`,selectTimelapse:`타임랩스 선택`,selectTimelapseDesc:`자동 일치 항목 없음. 이 인쇄의 타임랩스를 선택하세요:`,deleteArchives:`아카이브 삭제`,deleteArchivesConfirm:`{{count}}개 아카이브를 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.`,deleteCount:`{{count}}개 삭제`,deletePurgeStats:`빠른 통계에서도 이 인쇄 항목 제거 (필라멘트, 시간, 비용, 에너지)`,deleteQueueItemsWarning:`이 아카이브와 연결된 {{count}}개의 대기열 항목도 함께 제거됩니다.`,deleteBlockedByPrinting:`삭제할 수 없습니다 — {{count}}개의 대기열 항목이 현재 인쇄 중입니다. 인쇄를 먼저 중지한 다음 다시 시도하십시오.`},page:{title:`아카이브`,printsCount:`{{total}}개 중 {{filtered}}개 인쇄`,dropFilesHere:`.3mf 파일을 여기에 놓으세요`,releaseToUpload:`놓아서 업로드`,only3mfSupported:`.3mf 파일만 지원됩니다`,close:`닫기`,selected:`{{count}}개 선택됨`,selectAll:`전체 선택`,tags:`태그`,project:`프로젝트`,favorite:`즐겨찾기`,delete:`삭제`,toggledFavorites:`{{count}}개 아카이브의 즐겨찾기가 변경됨`,failedUpdateFavorites:`즐겨찾기 업데이트 실패`,archivesDeleted:`{{count}}개 아카이브가 삭제됨`,failedDeleteArchives:`아카이브 삭제 실패`,photoDeleted:`사진이 삭제됨`,failedDeletePhoto:`사진 삭제 실패`},list:{name:`이름`,printer:`프린터`,date:`날짜`,size:`크기`,actions:`작업`,hasTimelapse:`타임랩스 있음`},log:{date:`날짜`,printName:`인쇄 이름`,printer:`프린터`,user:`사용자`,status:`상태`,duration:`소요 시간`,filament:`필라멘트`,filamentUsed:`사용 필라멘트량`,cost:`비용`,energy:`전력량`,energyCost:`전력 비용`,completedAt:`완료`,columns:`열`,sortBy:`{{column}} 기준 정렬`,allPrinters:`모든 프린터`,allUsers:`모든 사용자`,allStatuses:`모든 상태`,cancelled:`취소됨`,skipped:`건너뜀`,dateFrom:`시작`,dateTo:`종료`,noEntries:`인쇄 로그 항목이 없습니다`,showing:`{{total}}개 중 {{count}}개 표시`,rowsPerPage:`행`,page:`페이지`,prev:`이전`,next:`다음`,clearLog:`로그 지우기`,clearLogTitle:`인쇄 로그 지우기`,clearLogConfirm:`모든 인쇄 로그 항목이 영구적으로 삭제됩니다. 아카이브와 대기열 항목은 영향받지 않습니다. 이 작업은 취소할 수 없습니다. 계속하시겠습니까?`,clearLogButton:`모두 지우기`,cleared:`{{count}}개 로그 항목이 지워졌습니다`,clearFailed:`인쇄 로그 지우기 실패`,deleteEntryTitle:`인쇄 로그 항목 삭제`,deleteEntryConfirm:`이 항목이 로그에서 삭제되며 필라멘트, 시간 및 비용 기여도가 빠른 통계에서 제외됩니다. 해당 아카이브(있는 경우)는 영향을 받지 않습니다. 이 작업은 취소할 수 없습니다.`,entryDeleted:`인쇄 로그 항목이 삭제되었습니다`,entryDeleteFailed:`인쇄 로그 항목 삭제 실패`,editEntryTitle:`인쇄 로그 항목 편집`,editEntryDescription:`이 인쇄를 분류합니다. 실패 분석 위젯이 이 값으로 그룹화하므로 업데이트가 통계에 즉시 반영됩니다.`,entryUpdated:`인쇄 로그 항목이 업데이트되었습니다`,entryUpdateFailed:`인쇄 로그 항목 업데이트 실패`,statuses:{completed:`완료됨`,failed:`실패`,stopped:`중지됨`,cancelled:`취소됨`,skipped:`건너뜀`}},runLog:{title:`인쇄 기록`,modalTitle:`인쇄 기록 — {{name}}`,modalTitleFallback:`이 아카이브`,empty:`이 아카이브에 대해 기록된 인쇄 이벤트가 없습니다.`,col:{date:`날짜`,status:`상태`,duration:`소요 시간`,filament:`필라멘트`,cost:`비용`},status:{completed:`완료`,failed:`실패`,cancelled:`취소됨`,stopped:`중지됨`,skipped:`건너뜀`,printing:`인쇄 중`}}},dispatchToast:{untitled:`인쇄 작업`,startingPrints:`인쇄 시작 중`,progressSummary:`{{complete}}/{{total}} 완료 • 처리 중: {{processing}}`,expandDetails:`디스패치 세부 정보 펼치기`,collapseDetails:`디스패치 세부 정보 접기`,awaitingPrinter:`프린터 응답 대기 중…`,status:{processing:`처리 중`,completed:`완료`,failed:`실패`},failed:{generic:`디스패치 실패`,upload_failed:`프린터로 업로드 실패`,start_command_failed:`프린터가 시작 명령을 거부했습니다`},dismiss:`닫기`},pipelineRuns:{title:`파이프라인 실행`,loading:`불러오는 중…`,empty:`아직 파이프라인 실행이 없습니다.`,filter:{pipeline:`파이프라인`,status:`상태`,target:`대상`,all:`전체`,allPipelines:`모든 파이프라인`,allStatus:`모든 상태`,allTargets:`모든 대상`,clear:`필터 지우기`,noMatches:`현재 필터와 일치하는 실행이 없습니다.`},totalCount_one:`{{n}}회 실행`,totalCount_other:`{{n}}회 실행`,copies:`사본 {{n}}`,failedCount:`실패 {{n}}`,copyN:`사본 {{n}}`,retryFailed:`실패 재시도`,retryOf:`#{{n}}의 재시도`,pagination:`{{total}} 중 {{start}}–{{end}}`,toast:{cancelled:`실행 취소됨`,cancelFailed:`취소 실패`,retryStarted:`재시도 시작됨`,retryFailed:`재시도 실패`,cleared:`{{n}}회 실행 삭제됨`,clearFailed:`삭제 실패`},clearLog:`로그 지우기`,clearConfirmTitle:`로그를 지울까요?`,clearConfirmBody:`완료, 실패, 취소, 부분 실패한 모든 파이프라인 실행을 삭제합니까? 진행 중인 실행은 유지됩니다. 되돌릴 수 없습니다.`,clearConfirmAction:`지우기`,jobStatus:{pending:`대기 중`,awaiting_printer:`프린터 대기 중`,queued:`대기 중`,printing:`인쇄 중`,completed:`완료됨`,failed:`실패`,cancelled:`취소됨`},cancelledByUser:`사용자에 의해 취소됨`},queue:{title:`인쇄 대기열`,subtitle:`인쇄 작업을 예약하고 관리하세요`,editQueueItem:`대기열 항목 편집`,selectAllPlates:`{{count}}개 플레이트 전체 선택`,deselectAll:`전체 해제`,printQueued:`인쇄가 대기열에 추가됨`,printQueuedWillStartWhenIdle:`프린터가 유휴 상태가 되면 시작됩니다`,itemsQueued:`{{count}}개 항목이 대기열에 추가됨`,sending:`전송 중...`,sendingProgress:`{{current}}/{{total}} 전송 중...`,adding:`추가 중...`,addingProgress:`{{current}}/{{total}} 추가 중...`,savingProgress:`{{current}}/{{total}} 저장 중...`,clearQueue:`대기열 지우기`,clearHistory:`기록 지우기`,emptyQueue:`대기열이 비어 있습니다`,position:`위치`,scheduledTime:`예약 시간`,moveUp:`위로 이동`,moveDown:`아래로 이동`,startNow:`지금 시작`,printingInProgress:`인쇄 중...`,viewArchive:`아카이브 보기`,viewInFileManager:`파일 관리자에서 보기`,itemCount:`{{count}}개 항목`,itemCount_plural:`{{count}}개 항목`,dragToReorder:`드래그하여 순서 변경 (즉시만)`,reorderHint:`위치는 즉시 항목에만 영향을 줍니다. 예약된 항목은 설정된 시간에 실행됩니다.`,sjf:{label:`SJF`,tooltip:`최단 작업 우선 — 스케줄러가 짧은 인쇄를 우선합니다`},addedBy:`{{name}}님이 추가함`,nextInQueue:`다음 대기`,clearPlateSuccess:`플레이트 비워짐 — 다음 인쇄 준비 완료`,plateNumber:`플레이트 {{index}}`,quantity:`수량`,quantityHint:`{{count}}개 대기열 항목 생성`,plateQuantityLabel:`{{plate}} 실행 횟수`,plateQuantityTotal_one:`총 {{count}}회`,plateQuantityTotal_other:`총 {{count}}회`,batchOrders:{title:`배치 주문`,emptyTitle:`배치 주문 없음`,emptyDescription:`여러 플레이트 파일이나 한 플레이트의 여러 복사본을 대기열에 넣으면 주문이 진행 상황과 함께 여기에 표시됩니다.`,filter:{active:`진행 중`,completed:`완료`,cancelled:`취소됨`,all:`전체`},status:{active:`진행 중`,completed:`완료`,cancelled:`취소됨`},noTargets:`그룹만`,noTargetsHint:`플레이트별 목표 수량이 도입되기 전에 생성되어 목표가 아닌 대기열에 넣은 실행을 추적합니다.`,dispatchRemaining:`남은 {{count}}개 대기열 추가`,dispatchPlate:`남은 항목 추가`,strandedPlate:`설정을 복사할 실행이 없습니다`,strandedNotice:`아직 남은 {{owed}}건 중 {{runs}}건을 대기열에 추가할 수 없습니다. 해당 플레이트에는 설정을 복사할 대기 중이거나 완료된 실행이 남아 있지 않습니다. 파일에서 해당 플레이트를 한 번 대기열에 추가하거나 주문을 취소하세요.`,dispatched:`{{name}}의 남은 실행을 대기열에 추가했습니다`,plateProgress:`{{target}}개 중 {{completed}}개 완료`,remaining:`{{count}}개 남음`,failed:`{{count}}개 실패`,printing:`{{count}}개 인쇄 중`,wholeFile:`파일 전체`,due:`기한 {{date}}`,costSoFar:`현재까지 {{amount}}`,costRemaining:`({{amount}} 남음)`},activeBatches:`활성 배치`,batchProgress:`{{total}}개 중 {{completed}}개 완료`,cancelBatch:`나머지 취소`,batchCancelled:`남은 배치 항목이 취소되었습니다`,cancelBatchConfirmTitle:`배치 취소`,cancelBatchConfirmMessage:`이 주문을 종료할까요? 대기열에 남은 실행은 취소되고, 생산하지 못한 분량도 더 이상 요구하지 않습니다.`,batch:{defaultName:`배치`,label:`{{count}}개 항목`,label_plural:`{{count}}개 항목`,pendingCount:`{{count}}개 대기 중`,pendingCount_plural:`{{count}}개 대기 중`,expand:`배치 펼치기`,collapse:`배치 접기`,groupAsBatch:`배치로 묶기…`,groupAsBatchDescription:`선택한 {{count}}개 항목을 접을 수 있는 하나의 배치로 묶습니다.`,nameLabel:`배치 이름`,namePlaceholder:`예: 금요일 선물`,create:`배치 만들기`,ungroup:`그룹 해제`,ungroupConfirmTitle:`배치 그룹을 해제하시겠습니까?`,ungroupConfirmMessage:`항목은 큐에 남아 있지만 더 이상 함께 그룹화되지 않습니다.`,dragGroup:`그룹 드래그`},tabs:{batches:`배치`,queue:`큐`,history:`기록`,timeline:`타임라인`,pipelines:`파이프라인`},layout:{flatList:`목록`,byPrinter:`프린터별`,groupByPrinter:`프린터별로 묶기`},history:{emptyTitle:`아직 기록이 없습니다`,emptyDescription:`완료·취소·실패한 인쇄가 여기에 표시됩니다.`,showMore:`더 보기`,showingCount:`{{total}}개 중 {{shown}}개 표시`},dragGhost:{multiCount:`{{count}}개 항목`,batch:`{{name}} ({{count}}부)`,batch_plural:`{{name}} ({{count}}부)`},sections:{currentlyPrinting:`현재 인쇄 중`,queued:`대기 중`,history:`기록`},status:{pending:`대기 중`,waiting:`기다리는 중`,printing:`인쇄 중`,paused:`일시정지`,completed:`완료`,failed:`실패`,skipped:`건너뜀`,cancelled:`취소됨`},summary:{printing:`인쇄 중`,queued:`대기 중`,totalTime:`총 대기열 시간`,totalWeight:`총 대기열 무게`,history:`기록`},filter:{allPrinters:`모든 프린터`,unassigned:`미할당`,allStatus:`모든 상태`,allLocations:`모든 위치`,any:`전체`},sort:{byPosition:`위치별 정렬`,byName:`이름별 정렬`,byPrinter:`프린터별 정렬`,bySchedule:`예약별 정렬`,byDate:`날짜별 정렬`,ascendingOldest:`오름차순 (오래된 것 먼저)`,descendingNewest:`내림차순 (최신 것 먼저)`},badges:{staged:`준비됨`,requiresPrevious:`이전 성공 필요`,autoPowerOff:`자동 전원 끄기`,gcodeInjection:`G코드`},empty:{title:`예약된 인쇄 없음`,description:`아카이브 페이지의 컨텍스트 메뉴에서 "예약" 옵션을 사용하거나 파일을 드래그 앤 드롭하여 시작하세요.`},time:{etaIfStartedNow:`이 작업을 지금 시작할 경우의 완료 예정 시각`,whenFree:`프린터가 사용 가능해지면`,overdue:`기한 초과`,now:`지금`,lessThanMinute:`1분 이내`,inMinutes:`{{count}}분 후`,inHours:`{{count}}시간 후`},actions:{startPrint:`인쇄 시작`,stopPrint:`인쇄 정지`,requeue:`재대기`},bulkEdit:{title:`{{count}}개 항목 편집`,title_plural:`{{count}}개 항목 편집`,description:`변경된 설정만 선택된 항목에 적용됩니다.`,printer:`프린터`,noChange:`— 변경 없음 —`,queueOptions:`대기열 옵션`,staged:`준비됨 (수동 시작)`,autoPowerOff:`인쇄 후 자동 전원 끄기`,requirePrevious:`이전 성공 필요`,gcodeInjection:`G코드 삽입`,printOptions:`인쇄 옵션`,bedLevelling:`베드 레벨링`,flowCalibration:`유량 캘리브레이션`,vibrationCalibration:`진동 캘리브레이션`,layerInspection:`첫 번째 층 검사`,timelapse:`타임랩스`,useAms:`AMS 사용`,nozzleOffsetCali:`노즐 오프셋 보정`,applyChanges:`변경사항 적용`,selectAll:`전체 선택`,deselectAll:`전체 해제`,selected:`{{count}}개 선택됨`,editSelected:`선택 항목 편집`,cancelSelected:`선택 항목 취소`},confirm:{cancelTitle:`예약된 인쇄 취소`,cancelMessage:`"{{name}}"을(를) 취소하시겠습니까?`,stopTitle:`인쇄 정지`,stopMessage:`"{{name}}"의 현재 인쇄를 정지하시겠습니까? 프린터의 인쇄 작업이 취소됩니다.`,removeTitle:`기록에서 제거`,removeMessage:`대기열 기록에서 "{{name}}"을(를) 제거하시겠습니까?`,clearHistoryTitle:`기록 지우기`,clearHistoryMessage:`기록에서 {{count}}개 항목을 모두 제거하시겠습니까?`,cancelButton:`인쇄 취소`,stopButton:`인쇄 정지`,thisPrint:`이 인쇄`,thisItem:`이 항목`},toast:{cancelled:`대기열 항목이 취소되었습니다`,cancelFailed:`항목 취소 실패`,removed:`대기열 항목이 제거되었습니다`,keptForOrder:`제거 대신 취소했습니다: 배치 주문이 이 플레이트를 다시 대기열에 넣을 수 있는 유일한 실행입니다`,historyKeptForOrders:`배치 주문에 아직 필요한 {{kept}}건은 남겨 두었습니다.`,removeFailed:`항목 제거 실패`,stopped:`인쇄가 정지되었습니다`,stopFailed:`인쇄 정지 실패`,released:`인쇄가 대기열에 릴리스되었습니다`,startFailed:`인쇄 시작 실패`,reorderFailed:`대기열 순서 변경 실패`,historyCleared:`{{count}}개 기록 항목이 지워졌습니다`,clearHistoryFailed:`기록 지우기 실패`,updateFailed:`항목 업데이트 실패`,bulkCancelled:`{{count}}개 항목이 취소되었습니다`,bulkCancelFailed:`항목 취소 실패`,batchCreated:`"{{name}}" 배치를 만들었습니다`,batchCreateFailed:`배치 만들기에 실패했습니다`,batchUngrouped:`{{count}}개 항목의 그룹을 해제했습니다`,batchUngroupFailed:`배치 그룹 해제에 실패했습니다`,resumedAfterFailure:`큐를 재개했습니다 — {{restored}}개 작업을 대기 상태로 복원했습니다`,resumeAfterFailureFailed:`큐 재개에 실패했습니다`},resumeAfterFailure:{banner:`{{printer}}이(가) 이전 인쇄 실패로 인해 차단되었습니다 — {{count}}개 작업이 건너뛰어졌습니다`,bannerHint:`프린터 문제를 해결한 후 재개하여 건너뛴 작업을 복원하고 차단을 해제하세요.`,button:`실패 후 재개`,confirmTitle:`실패 후 큐를 재개하시겠습니까?`,confirmMessage:`{{printer}}에서 건너뛴 {{count}}개 작업을 대기 상태로 복원하고 이전 인쇄 차단을 해제합니다. 계속하기 전에 프린터가 준비되었는지 확인하세요.`},timeline:{listView:`목록`,timelineView:`타임라인`,unassigned:`미할당`,noData:`이 날에 예약된 인쇄 없음`,nothingCommitted:`이 시간 창에 확정된 일정이 없습니다. 대기 중인 항목, 보류된 항목, 유휴 프린터의 ASAP 작업은 표시되지 않습니다 — 예약 시간을 설정하거나 대기 항목을 릴리스하면 여기에 표시됩니다.`,allDoneBy:`모든 인쇄 예상 완료 시간: {{time}}`,staged:`준비됨`,filterAll:`모두 표시`,filterPrinting:`인쇄 중`,filterQueued:`대기 중`,time:{anyMoment:`잠시 후`,minutesLeft:`{{minutes}}분 남음`,hoursLeft:`{{hours}}시간 남음`,hoursMinutesLeft:`{{hours}}시간 {{minutes}}분 남음`},day:{previous:`이전 날`,next:`다음 날`,today:`오늘`},window:{back12h:`12시간 이전`,forward12h:`12시간 이후`,now:`지금`},printerColumnHeader:`프린터`},permissions:{noStopPrint:`인쇄를 정지할 권한이 없습니다`,noStartPrint:`인쇄를 시작할 권한이 없습니다`,noEdit:`이 대기열 항목을 편집할 권한이 없습니다`,noCancel:`이 대기열 항목을 취소할 권한이 없습니다`,noRequeue:`항목을 재대기할 권한이 없습니다`,noRemove:`이 대기열 항목을 제거할 권한이 없습니다`,noClearHistory:`모든 기록을 지울 권한이 없습니다`,noEditItems:`대기열 항목을 편집할 권한이 없습니다`,noCancelItems:`대기열 항목을 취소할 권한이 없습니다`},filamentShort:{rowBadge:`할당된 스풀의 필라멘트가 부족합니다`,rowTooltip:`디스패치 스케줄러가 이 항목을 표시했습니다. 재생 버튼을 클릭하여 슬롯별 부족량을 확인하고 인쇄 여부를 결정하세요.`,confirmTitle:`필라멘트 부족`,confirmIntro:`할당된 스풀이 하나 이상의 슬롯을 채울 수 없습니다. 그래도 인쇄하시겠습니까?`,lineItem:`슬롯 {{slot}}: {{required}}g 필요, {{remaining}}g 남음`,unknown:`알 수 없음`,printAnyway:`그냥 인쇄`},slicerAmsMapping:{rowBadge:`이 프린터용으로 저장된 AMS 슬롯`,rowTooltip:`이 아카이브에는 슬라이서가 선택한 정확한 AMS 슬롯이 이 항목의 대상 프린터용으로 저장되어 있습니다. 해당 프린터에서 재인쇄하면 유형과 색상으로 다시 맞추는 대신 그 트레이를 재사용할 수 있습니다.`}},stats:{title:`대시보드`,subtitle:`위젯을 드래그하여 정렬하세요. 눈 아이콘을 클릭하여 숨기세요.`,overview:`개요`,totalPrints:`총 인쇄 수`,successRate:`성공률`,totalPrintTime:`총 인쇄 시간`,printTime:`인쇄 시간`,totalFilament:`총 사용 필라멘트`,filamentUsed:`사용된 필라멘트`,filamentCost:`필라멘트 비용`,totalCost:`총 비용`,energyUsed:`사용된 에너지`,energyCost:`에너지 비용`,energyWarmingUpTooltip:`에너지 추적이 시간별 스냅샷을 수집 중입니다. 날짜 범위 합계는 선택한 범위 이전에 하나 이상의 스냅샷이 존재하면 정확해집니다. 초기 값이 적게 집계될 수 있습니다.`,averagePrintTime:`평균 인쇄 시간`,printsPerDay:`일일 인쇄 수`,byPrinter:`프린터별`,printsByPrinter:`프린터별 인쇄`,byMaterial:`재료별`,byMonth:`월별`,last7Days:`최근 7일`,last30Days:`최근 30일`,last90Days:`최근 90일`,allTime:`전체 기간`,quickStats:`빠른 통계`,printActivity:`인쇄 활동`,filamentTypes:`필라멘트 종류`,filamentTrends:`필라멘트 추세`,failureAnalysis:`실패 분석`,timeAccuracy:`시간 정확도`,successful:`성공:`,failed:`실패:`,cancelled:`취소됨:`,perfectEstimate:`100% = 완벽한 예상`,noTimeAccuracyData:`아직 시간 정확도 데이터 없음`,noFilamentData:`필라멘트 데이터 없음`,noPrinterData:`프린터 데이터 없음`,noPrintData:`인쇄 데이터 없음`,noPrintDataLast30Days:`최근 30일 인쇄 데이터 없음`,failureReasons:`실패 원인`,topFailureReasons:`주요 실패 원인`,failedPrintsCount:`{{total}}개 인쇄 중 {{failed}}개 실패`,lastWeekRate:`지난 주: {{rate}}%`,resetLayout:`레이아웃 초기화`,recalculateCosts:`비용 재계산`,recalculateCostsHint:`현재 필라멘트 가격으로 모든 아카이브 비용 재계산`,exportStats:`통계 내보내기`,exportAsCsv:`CSV로 내보내기`,exportAsExcel:`Excel로 내보내기`,hiddenCount:`{{count}}개 숨겨짐`,exportDownloaded:`내보내기 다운로드됨`,exportFailed:`내보내기 실패`,layoutReset:`레이아웃이 초기화되었습니다`,recalculatedCosts:`{{count}}개 아카이브의 비용이 재계산되었습니다`,recalculateFailed:`비용 재계산 실패`,loadingStats:`통계 로딩 중...`,noPermissionResetLayout:`레이아웃을 초기화할 권한이 없습니다`,noPermissionRecalculate:`비용을 재계산할 권한이 없습니다`,noPrintDataInRange:`선택한 범위에 인쇄 데이터 없음`,periodFilament:`기간 필라멘트`,periodCost:`기간 비용`,avgPerPrint:`인쇄당 평균`,usageOverTime:`시간별 사용량`,energyOverTime:`시간별 에너지 사용량`,filamentByWeight:`무게`,printDuration:`인쇄 시간`,printerUtilization:`프린터 사용률`,filamentSuccess:`재료별 성공률`,printHabits:`인쇄 습관`,printTimeOfDay:`시간대별 인쇄`,colorDistribution:`색상 분포`,noColorData:`색상 데이터 없음`,records:`기록`,longestPrint:`최장 인쇄`,heaviestPrint:`가장 무거운 인쇄`,mostExpensivePrint:`가장 비싼 인쇄`,busiestDay:`가장 바쁜 날`,successStreak:`연속 성공`,streakPrint:`연속 인쇄`,streakPrints:`{{count}}번 연속 인쇄`,printerStats:`프린터 통계`,hours:`시간`,avgPrints:`평균 인쇄`,noArchiveData:`인쇄 데이터 없음`,filamentByTime:`시간`,avgWeight:`평균 무게`,avgTime:`평균 시간`,filamentByPrints:`인쇄`,timeframe:{today:`오늘`,"this-week":`이번 주`,"this-month":`이번 달`,"last-7":`최근 7일`,"last-30":`최근 30일`,"last-90":`최근 90일`,"this-year":`올해`,"all-time":`전체 기간`,custom:`사용자 지정 범위`,from:`시작`,to:`종료`},allUsers:`모든 사용자`,noUser:`사용자 없음 (시스템)`,filterByUser:`사용자별 필터`},maintenance:{title:`유지보수`,overview:`개요`,allOk:`모든 유지보수 최신 상태`,dueCount:`{{count}}개 항목 예정`,dueCount_plural:`{{count}}개 항목 예정`,warningCount:`{{count}}개 경고`,warningCount_plural:`{{count}}개 경고`,totalPrintTime:`총 인쇄 시간`,nextMaintenance:`다음 유지보수`,nothingDue:`예정 없음`,tasks:`작업`,lastPerformed:`마지막 수행`,interval:`간격`,hoursRemaining:`{{hours}}시간 남음`,hoursOverdue:`{{hours}}시간 초과`,markDone:`완료로 표시`,performMaintenance:`유지보수 수행`,history:`기록`,noHistory:`유지보수 기록 없음`,editPrintHours:`인쇄 시간 편집`,currentHours:`현재 시간`,statusTab:`상태`,settingsTab:`설정`,overdueCount:`{{count}}개 초과`,dueSoonCount:`{{count}}개 곧 예정`,dueSoon:`곧 예정`,allGood:`모두 정상`,overdueBy:`{{duration}} 초과`,dueIn:`{{duration}} 후 예정`,timeLeft:`{{duration}} 남음`,day:`1일`,days:`{{count}}일`,week:`1주`,weeks:`{{count}}주`,month:`1개월`,months:`{{count}}개월`,year:`1년`,maintenanceTypes:`유지보수 유형`,maintenanceTypesDescription:`시스템 유형 및 사용자 지정 유지보수 작업`,addCustomType:`사용자 지정 유형 추가`,restoreDefaults:`기본 작업 복원`,intervalType:`간격 유형`,intervalValue:`간격 ({{type}})`,icon:`아이콘`,documentationLink:`문서 링크 (선택사항)`,assignToPrinters:`프린터에 할당`,selectAtLeastOnePrinter:`최소 한 개의 프린터를 선택하세요`,addType:`유형 추가`,custom:`사용자 지정`,printHours:`인쇄 시간`,calendarDays:`달력 일수`,exampleName:`예: HEPA 필터 교체`,viewDocumentation:`문서 보기`,timeBasedInterval:`시간 기반 간격`,intervalOverrides:`간격 재정의`,intervalOverridesDescription:`특정 프린터의 간격 사용자 지정`,assignedToPrinters:`할당된 프린터:`,noPrintersAssigned:`할당된 프린터 없음`,addPrinterShort:`추가:`,printersAssignedClick:`{{count}}개 프린터 할당됨 - 클릭하여 관리`,removeFromPrinter:`이 프린터에서 제거`,types:{lubricateCarbonRods:`카본 로드 윤활`,lubricateRails:`리니어 레일 윤활`,cleanNozzle:`노즐/핫엔드 청소`,checkBelts:`벨트 장력 확인`,cleanBuildPlate:`빌드 플레이트 청소`,checkExtruder:`압출기 기어 확인`,checkCooling:`냉각 팬 확인`,generalInspection:`일반 점검`,cleanCarbonRods:`카본 로드 청소`,lubricateSteelRods:`스틸 로드 윤활`,cleanSteelRods:`스틸 로드 청소`,cleanLinearRails:`리니어 레일 청소`,checkPtfeTube:`PTFE 튜브 확인`,replaceHepaFilter:`HEPA 필터 교체`,replaceCarbonFilter:`활성탄 필터 교체`,lubricateLeftNozzleRail:`좌측 노즐 레일 윤활`},maintenanceComplete:`유지보수가 완료로 표시되었습니다`,typeUpdated:`유지보수 유형이 업데이트되었습니다`,typeDeleted:`유지보수 유형이 삭제되었습니다`,defaultsRestored:`{{count}}개 기본 작업이 복원되었습니다`,printHoursUpdated:`인쇄 시간이 업데이트되었습니다`,printerAssigned:`프린터가 할당되었습니다`,printerRemoved:`프린터가 제거되었습니다`,deleteTypeConfirm:`"{{name}}"을(를) 삭제하시겠습니까?`,deleteSystemTypeTitle:`기본 유지보수 작업을 삭제하시겠습니까?`,deleteSystemTypeMessage:`기본 유지보수 작업 "{{name}}"을(를) 삭제하시겠습니까?`,noPermissionUpdate:`유지보수 항목을 업데이트할 권한이 없습니다`,noPermissionPerform:`유지보수를 수행할 권한이 없습니다`,noPermissionEditTypes:`유지보수 유형을 편집할 권한이 없습니다`,noPermissionDeleteTypes:`유지보수 유형을 삭제할 권한이 없습니다`,noPermissionEditHours:`인쇄 시간을 편집할 권한이 없습니다`,noPermissionRemovePrinter:`프린터 할당을 제거할 권한이 없습니다`,noPermissionAssignPrinter:`프린터를 할당할 권한이 없습니다`,noPermissionEditIntervals:`간격을 편집할 권한이 없습니다`,configureSettings:`유지보수 유형 및 간격 설정`},settings:{sliceEngine:`슬라이스 엔진`,sliceEngineSidecar:`서버 사이드카`,sliceEngineSidecarHint:`슬라이싱이 서버의 슬라이서 사이드카 컨테이너에서 실행됩니다.`,sliceEngineBrowser:`브라우저에서`,sliceEngineBrowserHint:`슬라이싱이 서버 없이 이 기기에서 실행됩니다.`,title:`설정`,general:`일반`,tabs:{general:`일반`,smartPlugs:`스마트 플러그`,sensors:`센서`,notifications:`알림`,queue:`워크플로우`,queueDispatch:`큐 및 디스패치`,queuePipelines:`파이프라인`,filament:`필라멘트`,network:`네트워크`,apiKeys:`API 키`,virtualPrinter:`가상 프린터`,spoolbuddy:`SpoolBuddy`,failureDetection:`실패 감지`,users:`인증`,backup:`백업`,emailAuth:`이메일 인증`,ldap:`LDAP`,twoFa:`이중 인증`,oidc:`SSO / OIDC`,security:`보안`},spoolbuddy:{infoTitle:`SpoolBuddy 기기`,infoBody:`SpoolBuddy 키오스크는 하트비트를 통해 자동으로 등록됩니다. 더 이상 사용하지 않거나 데몬 충돌로 인한 중복이 있는 경우 여기서 기기를 등록 해제하세요.`,duplicatesTitle:`{{count}}개 기기 등록됨`,duplicatesBody:`첫 번째로 등록된 기기만 키오스크 UI에서 사용됩니다. 충돌로 인한 오래된 중복이 있으면 등록 해제하세요 — 온라인 기기는 다음 하트비트에서 자동으로 재등록됩니다.`,empty:`아직 등록된 SpoolBuddy 기기가 없습니다.`,online:`온라인`,offline:`오프라인`,unregister:`등록 해제`,unregisterSuccess:`기기 등록 해제됨`,unregisterError:`기기 등록 해제 실패`,confirmTitle:`SpoolBuddy 기기를 등록 해제하시겠습니까?`,confirmBody:`데이터베이스에서 "{{hostname}}" ({{deviceId}})를 제거합니다. 기기가 온라인이면 다음 하트비트에서 자동으로 재등록됩니다.`,ipAddress:`IP 주소`,firmware:`펌웨어`,lastSeen:`마지막 확인`,daemonUptime:`데몬 가동 시간`,systemUptime:`시스템 가동 시간`,never:`없음`,nfc:`NFC`,scale:`저울`,cpuTemp:`CPU 온도`,memory:`메모리`,disk:`디스크`,update:`업데이트`,updateConfirmTitle:`Spoolbuddy 데몬을 업데이트하시겠습니까?`,updateConfirmBody:`"{{hostname}}"에서 소프트웨어 업데이트를 실행하시겠습니까? 업데이트가 적용되면 데몬이 재시작됩니다.`,restartBrowser:`브라우저 재시작`,restartBrowserConfirmTitle:`키오스크 브라우저를 재시작하시겠습니까?`,restartBrowserConfirmBody:`"{{hostname}}"의 키오스크 브라우저를 재시작하시겠습니까? 화면이 잠시 꺼집니다.`,restartDaemon:`데몬 재시작`,restartDaemonConfirmTitle:`Spoolbuddy 데몬을 재시작하시겠습니까?`,restartDaemonConfirmBody:`"{{hostname}}"의 Spoolbuddy 데몬을 재시작하시겠습니까? 기기가 몇 초 동안 오프라인 상태가 됩니다.`,reboot:`재부팅`,rebootConfirmTitle:`기기를 재부팅하시겠습니까?`,rebootConfirmBody:`"{{hostname}}"을(를) 재부팅하시겠습니까? 기기가 약 1분 동안 오프라인 상태가 됩니다.`,shutdown:`종료`,shutdownConfirmTitle:`기기를 종료하시겠습니까?`,shutdownConfirmBody:`"{{hostname}}"을(를) 종료하시겠습니까? 다시 켜려면 물리적 접근이 필요합니다.`,commandConfirm:`확인`,commandQueued:`명령이 대기열에 추가됨`,commandError:`명령 전송 실패`,cpuLoad:`CPU 부하`},ldap:{title:`LDAP 인증`,enabledDesc:`LDAP 인증이 활성화되어 있습니다`,disabledDesc:`LDAP 인증이 비활성화되어 있습니다`,disabledHint:`아래에서 LDAP 설정을 구성하고 저장한 후 활성화하세요.`,enabled:`LDAP 인증 활성화됨`,disabled:`LDAP 인증 비활성화됨`,feature1:`사용자가 LDAP 자격 증명으로 로그인 가능`,feature2:`로컬 관리자 계정이 대체 수단으로 유지됨`,feature3:`LDAP 그룹이 로그인 시 Bambuddy 그룹에 매핑됨`,serverConfig:`LDAP 서버 설정`,serverUrl:`서버 URL`,serverUrlHint:`SSL에는 ldaps://, StartTLS에는 ldap:// 사용`,security:`보안`,securityHint:`StartTLS는 일반 연결을 TLS로 업그레이드합니다. LDAPS는 처음부터 TLS를 사용합니다.`,bindDn:`바인드 DN (서비스 계정)`,bindPassword:`바인드 비밀번호`,searchBase:`검색 기반 DN`,userFilter:`사용자 검색 필터`,userFilterHint:`{username}은 로그인 사용자명으로 대체됩니다. OpenLDAP의 경우 (uid={username})을 사용하세요.`,autoProvision:`사용자 자동 프로비저닝`,autoProvisionHint:`첫 LDAP 로그인 시 자동으로 Bambuddy 계정 생성`,defaultGroup:`기본 그룹`,defaultGroupNone:`— 없음 (대체 없음) —`,defaultGroupHint:`LDAP 사용자가 인증되었지만 매핑된 LDAP 그룹에 없을 때 할당되는 대체 그룹. 비워두면 매핑되지 않은 사용자에게 권한이 없습니다.`,groupMapping:`그룹 매핑 (JSON)`,groupMappingHint:`LDAP 그룹 DN을 Bambuddy 그룹에 매핑합니다. 사용 가능한 그룹: `,testConnection:`연결 테스트`,settingsSaved:`LDAP 설정이 저장되었습니다`,errors:{serverRequired:`LDAP 서버 URL이 필요합니다`,searchBaseRequired:`검색 기반 DN이 필요합니다`,enableAuthFirst:`먼저 인증을 활성화하세요`,configureLdapFirst:`먼저 LDAP 설정을 저장하세요`},advanced:`고급`},email:{smtpSettings:`SMTP 설정`,smtpHost:`SMTP 서버`,smtpPort:`SMTP 포트`,security:`보안`,authentication:`인증`,username:`사용자명`,password:`비밀번호`,fromEmail:`발신 이메일`,fromName:`발신자 이름`,testConnection:`SMTP 연결 테스트`,testRecipient:`테스트 수신자 이메일`,sendTest:`테스트 이메일 전송`,sending:`전송 중...`,save:`설정 저장`,saving:`저장 중...`,advancedAuth:`고급 인증`,advancedAuthEnabled:`고급 인증이 활성화되어 있습니다`,advancedAuthEnabledDesc:`이메일 기반 사용자 관리 기능이 활성화되어 있습니다. 신규 사용자는 이메일로 자동 생성된 비밀번호를 받으며, 사용자는 비밀번호 찾기 기능으로 비밀번호를 재설정할 수 있습니다.`,advancedAuthDisabled:`고급 인증이 비활성화되어 있습니다`,advancedAuthDisabledDesc:`이메일 기반 사용자 관리 기능을 활성화하려면 고급 인증을 활성화하세요.`,enable:`활성화`,disable:`비활성화`,feature1:`비밀번호가 자동 생성되어 신규 사용자에게 이메일로 전송됨`,feature2:`사용자가 사용자명 또는 이메일로 로그인 가능`,feature3:`비밀번호 찾기 기능 사용 가능`,feature4:`관리자가 이메일로 사용자 비밀번호 재설정 가능`,errors:{requiredFields:`모든 필수 항목을 입력하세요`,usernameRequired:`인증이 활성화된 경우 사용자명이 필요합니다`,enterTestEmail:`테스트 이메일 주소를 입력하세요`,smtpServerAndEmail:`테스트 전에 SMTP 서버와 발신 이메일을 입력하세요`,usernamePasswordRequired:`인증이 활성화된 경우 사용자명과 비밀번호가 필요합니다`,configureSmtpFirst:`먼저 SMTP 설정을 구성하고 테스트하세요`,enableAuthFirst:`이메일 기반 기능을 사용하려면 먼저 인증을 활성화하세요.`},success:{settingsSaved:`SMTP 설정이 성공적으로 저장되었습니다`},securityOptions:{starttls:`STARTTLS (포트 587)`,ssl:`SSL/TLS (포트 465)`,none:`없음 (포트 25)`},authOptions:{enabled:`활성화됨`,disabled:`비활성화됨`}},appearance:`모양`,notifications:`알림`,smartPlugs:`스마트 플러그`,spoolman:`Spoolman`,updates:`업데이트`,language:`언어`,languageDescription:`선호하는 언어를 선택하세요`,theme:`테마`,themeLight:`라이트`,themeDark:`다크`,themeSystem:`시스템`,defaultView:`기본 보기`,defaultViewDescription:`앱을 열 때 표시할 페이지`,checkForUpdates:`업데이트 확인`,autoUpdate:`자동 업데이트`,currentVersion:`현재 버전`,latestVersion:`최신 버전`,upToDate:`최신 상태입니다`,updateAvailable:`업데이트 가능`,notificationLanguage:`알림 언어`,notificationLanguageDescription:`푸시 알림 언어`,bedCooledThreshold:`베드 냉각 임계값`,bedCooledThresholdDescription:`인쇄 후 베드가 냉각된 것으로 간주되는 온도`,userNotificationsEnabled:`사용자 알림`,userNotificationsEnabledDescription:`사용자 알림 메뉴 및 인쇄 작업 이벤트에 대한 이메일 알림을 활성화합니다. 고급 인증이 필요합니다.`,userNotificationsDisabledHint:`사용자 알림을 사용하려면 고급 인증을 활성화하세요.`,notificationProviders:`알림 제공자`,addProvider:`제공자 추가`,editProvider:`제공자 편집`,providerType:`제공자 유형`,testNotification:`알림 테스트`,testSuccess:`테스트 알림이 성공적으로 전송되었습니다`,testFailed:`테스트 알림 전송 실패`,quietHours:`방해 금지 시간`,quietHoursDescription:`이 시간 동안 방해하지 않음`,quietHoursStart:`시작`,quietHoursEnd:`종료`,events:{title:`알림 이벤트`,printStart:`인쇄 시작됨`,printComplete:`인쇄 완료됨`,printFailed:`인쇄 실패`,printStopped:`인쇄 정지됨`,printProgress:`진행 마일스톤`,printProgressDescription:`25%, 50%, 75%에 알림`,printerOffline:`프린터 오프라인`,printerError:`프린터 오류`,filamentLow:`필라멘트 부족`,maintenanceDue:`유지보수 예정`,maintenanceDueDescription:`유지보수가 필요할 때 알림`},smartPlug:{title:`스마트 플러그`,add:`스마트 플러그 추가`,edit:`스마트 플러그 편집`,name:`이름`,ipAddress:`IP 주소`,linkedPrinter:`연결된 프린터`,autoOn:`자동 켜기`,autoOnDescription:`인쇄 시작 시 켜기`,autoOff:`자동 끄기`,autoOffDescription:`인쇄 완료 후 끄기`,offDelay:`끄기 지연`,offDelayMinutes:`인쇄 후 분`,offDelayTemp:`노즐 온도 이하일 때`,currentState:`현재 상태`,turnOn:`켜기`,turnOff:`끄기`},filamentTracking:`필라멘트 추적`,filamentTrackingDesc:`필라멘트 스풀을 추적하는 방법을 선택하세요. 내장 인벤토리를 사용하거나 외부 Spoolman 서버에 연결할 수 있습니다.`,autoAddUnknownRfid:`알 수 없는 RFID 스풀 자동 추가`,autoAddUnknownRfidDesc:`알 수 없는 RFID 태그가 있는 스풀이 감지되면 자동으로 인벤토리 항목을 생성합니다. 새 스풀을 미리 수동으로 등록한다면 중복을 피하기 위해 끄세요.`,filamentChecks:`필라멘트 확인`,disableFilamentWarnings:`필라멘트 경고 비활성화`,disableFilamentWarningsDesc:`인쇄 또는 대기열 추가 시 필라멘트 부족 경고 표시 안 함`,preferLowestFilament:`남은 필라멘트가 가장 적은 것 우선`,preferLowestFilamentDesc:`여러 스풀이 일치할 때 남은 필라멘트가 가장 적은 것 사용`,preferLowestFilamentBackupNote:`프린터에서 AMS 필라멘트 백업이 활성화된 경우에만 적용됩니다. 그렇지 않으면 선택한 스풀이 다 떨어졌을 때 두 번째 스풀로 전환할 수 없습니다.`,trackingModeBuiltIn:`내장 인벤토리`,trackingModeBuiltInDesc:`RFID 자동 매칭 및 사용량 추적 포함`,trackingModeSpoolmanDesc:`외부 필라멘트 관리 서버`,builtInFeatureRfid:`AMS의 Bambu Lab RFID 스풀 자동 감지`,builtInFeatureUsage:`인쇄당 필라멘트 소비량 추적`,builtInFeatureCatalog:`스풀, 색상, K 팩터 프로필 관리`,builtInFeatureThirdParty:`서드파티 스풀을 인벤토리 스풀에 할당 가능`,amsSyncButton:`AMS에서 무게 동기화`,amsSyncTitle:`AMS에서 스풀 무게 동기화`,amsSyncMessage:`연결된 프린터의 현재 AMS 잔여% 값으로 모든 인벤토리 스풀 무게를 덮어씁니다. 손상된 무게 데이터를 복구하는 데 사용하세요. 프린터가 온라인이어야 합니다.`,amsSyncing:`동기화 중...`,amsSyncSuccess:`{{synced}}개 스풀 동기화됨, {{skipped}}개 건너뜀`,amsSyncError:`AMS에서 무게 동기화 실패`,spoolmanAmsSyncButton:`AMS에서 Spoolman 무게 동기화`,spoolmanAmsSyncTitle:`AMS에서 Spoolman 스풀 무게 동기화`,spoolmanAmsSyncMessage:`연결된 프린터의 현재 AMS 잔여% 값으로 모든 Spoolman 스풀 무게를 업데이트합니다. 프린터가 온라인이어야 합니다.`,spoolmanAmsSyncing:`동기화 중...`,spoolmanAmsSyncSuccess:`{{synced}}개 스풀 동기화됨, {{skipped}}개 건너뜀`,spoolmanAmsSyncError:`AMS에서 Spoolman 무게 동기화 실패`,spoolmanAmsSyncErrorUnreachable:`Spoolman 무게 동기화 실패 (Spoolman 접근 불가)`,spoolmanAmsSyncErrorNotConfigured:`Spoolman 무게 동기화 실패 (Spoolman 미설정)`,spoolmanNotConfigured:`Spoolman 미설정`,spoolmanFilamentCatalogTitle:`Spoolman 필라멘트 카탈로그`,spoolmanFilamentCatalogDesc:`Spoolman 인스턴스의 필라멘트 이름 및 공 무게. 이름과 스풀 무게는 여기서 편집 가능하며 다른 속성은 Spoolman에서 직접 관리됩니다.`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`Spoolman 서버의 URL (예: http://localhost:7912)`,spoolmanConnected:`연결됨`,spoolmanDisconnected:`연결 끊김`,status:`상태`,connect:`연결`,disconnect:`연결 해제`,howSyncWorks:`동기화 작동 방식`,syncInfoRfidOnly:`RFID가 있는 공식 Bambu Lab 스풀만 동기화됨`,syncInfoAutoCreate:`새 스풀은 첫 번째 동기화 시 Spoolman에 자동 생성됨`,syncInfoThirdPartySkipped:`비 Bambu Lab 스풀 (서드파티, 리필)은 건너뜀`,linkingExistingSpools:`기존 스풀 연결`,linkingExistingSpoolsDesc:`기존 Spoolman 스풀을 AMS에 연결하려면 AMS 슬롯 위에 마우스를 올리고 "Spoolman에 연결"을 클릭하세요.`,syncMode:`동기화 모드`,syncModeAuto:`자동`,syncModeManual:`수동만`,syncModeAutoDesc:`변경이 감지되면 AMS 데이터가 자동으로 동기화됨`,syncModeManualDesc:`수동으로 트리거할 때만 동기화`,syncAmsData:`AMS 데이터 동기화`,syncAmsDataDesc:`프린터 AMS 데이터를 Spoolman에 수동으로 동기화`,allPrinters:`모든 프린터`,noDefaultPrinter:`기본값 없음 (매번 묻기)`,sidebarOrder:`사이드바 순서`,saveThumbnails:`썸네일 저장`,captureFinishPhoto:`완료 사진 캡처`,noPrintersConfigured:`설정된 프린터 없음`,archiveMode:{always:`항상 아카이브 항목 생성`,never:`아카이브 항목 생성 안 함`,ask:`매번 묻기`},checkForUpdatesLabel:`업데이트 확인`,checkPrinterFirmware:`프린터 펌웨어 확인`,includeBetaUpdates:`베타 버전 포함`,includeBetaUpdatesDesc:`업데이트 확인 시 베타 및 사전 릴리스 버전에 대해 알림`,localLogin:{disable:`로컬 사용자명/비밀번호 로그인 비활성화`,disableHint:`활성화하면 SSO 공급자로만 로그인할 수 있습니다. LDAP는 영향을 받지 않습니다. 서버에서 BAMBUDDY_LOCAL_LOGIN=true 를 설정하면 복구 경로가 유지됩니다.`},enableRetry:`재시도 활성화`,homeAssistantDescription:`Home Assistant를 통해 스마트 플러그 제어`,environmentManagedLabel:`(환경 변수 관리)`,autoEnabledViaEnv:`환경 변수를 통해 자동 활성화됨`,urlFromEnvReadOnly:`HA_URL 환경 변수에서 값 설정됨 (읽기 전용)`,tokenFromEnvReadOnly:`HA_TOKEN 환경 변수에서 값 설정됨 (읽기 전용)`,mqttConnectedTo:`연결됨`,prometheusDescription:`Prometheus 형식으로 프린터 데이터 노출`,noSmartPlugsTitle:`설정된 스마트 플러그 없음`,noSmartPlugsDescription:`에너지 사용량 추적 및 전원 제어 자동화를 위해 Tasmota 기반 스마트 플러그를 추가하세요.`,noProvidersTitle:`설정된 제공자 없음`,noProvidersDescription:`알림을 받으려면 제공자를 추가하세요.`,noTemplatesAvailable:`사용 가능한 템플릿 없음. 기본 템플릿을 시드하려면 백엔드를 재시작하세요.`,apiPermissionView:`프린터 상태 및 대기열 보기`,apiPermissionEdit:`인쇄 대기열에서 항목 추가 및 제거`,apiKeysEmptyTitle:`API 키 없음`,apiKeysEmptyDescription:`외부 서비스와 통합하려면 API 키를 만드세요.`,noUsersFound:`사용자를 찾을 수 없습니다`,noGroupsFound:`그룹을 찾을 수 없습니다`,noGroupsAvailable:`사용 가능한 그룹 없음`,passwordsDoNotMatch:`비밀번호가 일치하지 않습니다`,systemGroupWarning:`시스템 그룹 이름은 변경할 수 없습니다`,authDisabledTitle:`인증이 비활성화되어 있습니다`,authDisabledFeature1:`시스템 접근 시 로그인 필요`,authDisabledFeature2:`그룹 기반 권한으로 여러 사용자 생성`,authDisabledFeature3:`50개 이상의 세분화된 권한으로 접근 제어`,userHasCreated:`이 사용자가 만든 항목:`,userItemsQuestion:`이 항목들을 어떻게 처리하시겠습니까?`,deleteUserConfirm:`이 사용자를 삭제하시겠습니까?`,actionCannotBeUndone:`이 작업은 취소할 수 없습니다.`,addFirstSmartPlug:`첫 번째 스마트 플러그 추가`,providers:`제공자`,log:`로그`,testAll:`모두 테스트`,testResults:`테스트 결과`,testPassedCount:`{{count}}개 통과`,testFailedCount:`{{count}}개 실패`,messageTemplates:`메시지 템플릿`,messageTemplatesDescription:`각 이벤트에 대한 알림 메시지를 사용자 지정하세요.`,apiKeys:`API 키`,apiKeysDescription:`외부 통합 및 웹훅을 위한 API 키를 만드세요.`,createKey:`키 만들기`,apiKeyCreated:`API 키가 성공적으로 생성되었습니다`,apiKeyCopyWarning:`지금 이 키를 복사하세요 - 다시 표시되지 않습니다!`,useInApiBrowser:`API 브라우저에서 사용`,apiKeyQrButton:`QR 코드`,apiKeyQrTitle:`스캔하여 설정`,apiKeyQrCaption:`모바일 앱으로 스캔하여 이 서버와 API 키를 추가하세요.`,apiKeyQrWarning:`비밀 API 키가 포함되어 있습니다. 다른 사람이 볼 수 있는 곳에서 공유하거나 스크린샷하지 마세요.`,createNewApiKey:`새 API 키 만들기`,keyName:`키 이름`,keyNamePlaceholder:`예: Home Assistant, OctoPrint`,readStatus:`상태 읽기`,readStatusDescription:`프린터 상태, 대기열, 라이브러리, 아카이브 및 슬라이서 파이프라인 보기`,manageQueue:`대기열 관리`,manageQueueDescription:`인쇄 대기열에서 항목 추가 및 제거. "라이브러리 관리"와 함께 슬라이서 파이프라인 실행`,controlPrinter:`프린터 제어`,controlPrinterDescription:`인쇄 일시정지, 재개, 정지`,manageLibrary:`라이브러리 관리`,manageLibraryDescription:`라이브러리 파일 업로드, 이름 변경, 삭제 및 슬라이스; MakerWorld에서 모델 가져오기. "대기열 관리"와 함께 슬라이서 파이프라인 실행`,manageInventory:`재고 관리`,manageInventoryDescription:`스풀 및 재고 레코드 생성, 업데이트 및 삭제. SpoolBuddy 키오스크(NFC 스캔, 저울 측정값, 키오스크 시스템 명령)에 필요합니다.`,manageMaintenance:`유지보수 관리`,manageMaintenanceDescription:`완료된 유지보수 기록, 카운터 재설정, 주기 편집, 유지보수 유형 카탈로그 관리. 프린터 제어를 더 광범위하게 허용하지 않고 "노즐을 청소했다"를 기록하는 Home Assistant 자동화에 적합합니다.`,manageArchives:`아카이브 관리`,manageArchivesDescription:`오래된 출력물과 통계 기여 항목의 제거를 포함하여 출력 아카이브를 편집하고 삭제합니다. 출력 기록을 정리하는 자동화에 적합합니다.`,manageProjects:`프로젝트 관리`,manageProjectsDescription:`프로젝트를 생성, 업데이트, 삭제하고 프로젝트에 아카이브를 추가합니다. 출력물을 프로젝트로 정리하는 자동화에 적합합니다.`,maintenanceBadge:`유지보수`,archivesBadge:`아카이브`,projectsBadge:`프로젝트`,libraryBadge:`라이브러리`,inventoryBadge:`재고`,cloudAccess:`클라우드 접근 허용`,cloudAccessDescription:`사용자를 대신하여 Bambu Cloud 프리셋 및 필라멘트를 읽습니다. Bambu Cloud에 로그인되어 있어야 합니다.`,cloudBadge:`클라우드`,legacyKey:`레거시`,legacyKeyTooltip:`사용자별 소유권 이전에 생성됨. 클라우드 접근을 사용하려면 재생성하세요`,unnamedKey:`이름 없는 키`,lastUsed:`마지막 사용`,read:`읽기`,control:`제어`,createFirstKey:`첫 번째 키 만들기`,webhookEndpoints:`웹훅 엔드포인트`,webhookApiKeyHint:`X-API-Key 헤더에 API 키를 사용하세요.`,webhook:{getAllStatus:`모든 프린터 상태 가져오기`,getSpecificStatus:`특정 프린터 상태 가져오기`,addToQueue:`인쇄 대기열에 추가`,pausePrint:`인쇄 일시정지`,resumePrint:`인쇄 재개`,stopPrint:`인쇄 정지`},apiBrowser:`API 브라우저`,apiBrowserDescription:`사용 가능한 모든 API 엔드포인트를 탐색하고 테스트하세요.`,apiKeyForTesting:`테스트용 API 키`,apiKeyPlaceholder:`인증된 엔드포인트를 테스트하려면 API 키를 여기에 붙여넣으세요...`,apiKeyHint:`이 키는 요청과 함께 X-API-Key 헤더로 전송됩니다.`,deleteApiKeyTitle:`API 키 삭제`,deleteApiKeyMessage:`이 API 키를 삭제하시겠습니까? 이 키를 사용하는 모든 통합이 작동을 멈춥니다.`,deleteKey:`키 삭제`,amsDisplayThresholds:`AMS 표시 임계값`,amsThresholdsDescription:`AMS 습도 및 온도 표시기의 색상 임계값을 설정하세요.`,humidity:`습도`,goodGreen:`좋음 (녹색)`,fairOrange:`보통 (주황색)`,aboveFairBad:`보통 임계값 초과 시 빨간색 (나쁨)으로 표시`,fairAlsoDryingThreshold:`이 임계값은 자동 건조 활성화 시 트리거로도 사용됨`,fairBelowDryingFloor:`자동 건조로는 이 값에 도달할 수 없습니다. AMS는 히터가 작동하는 동안 {{floor}}% 이상을 보고하므로 각 주기가 끝나고 곧바로 다시 시작됩니다. 자동 건조를 사용한다면 {{floor}}%보다 높게 설정하세요.`,temperature:`온도`,goodBlue:`좋음 (파란색)`,aboveFairHot:`보통 임계값 초과 시 빨간색 (뜨거움)으로 표시`,tempAlarmThreshold:`알림 기준값`,tempAlarmSeparateFromBand:`알림을 보내는 것은 알림 기준값뿐입니다. 좋음과 보통은 표시 색상에만 사용됩니다. 비워 두면 기존과 같이 보통 기준값에서 알립니다.`,tempAlarmMustBePositive:`0 이하의 기준값은 무시되며, 보통 기준값으로 알립니다.`,historyRetention:`기록 보존`,keepSensorHistory:`센서 기록 보존 기간`,historyRetentionDescription:`오래된 습도 및 온도 데이터가 자동으로 삭제됩니다`,defaultPrintOptions:`기본 인쇄 옵션`,defaultPrintOptionsDescription:`새 인쇄 시작 시 기본값을 설정하세요. 인쇄 대화 상자에서 인쇄별로 재정의할 수 있습니다.`,defaultBedLevelling:`베드 레벨링`,defaultBedLevellingDesc:`인쇄 전 자동 베드 레벨링`,defaultFlowCali:`유량 캘리브레이션`,defaultFlowCaliDesc:`압출 유량 캘리브레이션`,defaultVibrationCali:`진동 캘리브레이션`,defaultVibrationCaliDesc:`링잉 아티팩트 감소`,defaultLayerInspect:`첫 번째 층 검사`,defaultLayerInspectDesc:`첫 번째 층 AI 검사`,defaultTimelapse:`타임랩스`,defaultTimelapseDesc:`타임랩스 영상 녹화`,defaultNozzleOffsetCali:`노즐 오프셋 보정`,defaultNozzleOffsetCaliDesc:`익스트루더 간 노즐 오프셋 보정`,tempFanPresetsTitle:`온도 및 팬 프리셋`,tempFanPresetsDescription:`프린터 카드의 온도 및 팬 속도 팝오버에 표시되는 빠른 선택 값을 사용자 지정합니다. 끄기 버튼은 항상 표시됩니다.`,tempFanPresetsNozzle:`노즐 온도`,tempFanPresetsBed:`베드 온도`,tempFanPresetsChamber:`챔버 온도`,tempFanPresetsFan:`팬 속도`,tempFanPresetsReset:`기본값으로 재설정`,concurrentUploadsTitle:`동시 업로드`,concurrentUploadsDescription:`대기열이 동시에 파일을 보낼 수 있는 프린터 수입니다. 프린터는 파일을 느리게 받으며(큰 출력물은 몇 분이 걸릴 수 있습니다) 각 프린터는 자기 차례를 기다립니다. 따라서 프린터가 많은 환경에서는 이 값을 높이면 배치의 마지막 프린터가 앞선 모든 전송이 끝나기를 기다리지 않아도 됩니다. 네트워크나 Bambuddy 호스트가 병렬 전송을 버거워하면 값을 낮추세요.`,concurrentUploadsLabel:`동시에 전송할 프린터 수`,concurrentUploadsHelp:`1이면 한 번에 한 대씩 전송합니다(기존 동작). 기본값은 4입니다.`,staggeredStart:`엇갈린 시작`,staggeredStartDescription:`다중 프린터 일괄 시작 시 기본 그룹 크기 및 간격. 인쇄 모달에서 배치별로 재정의할 수 있습니다.`,preheatTitle:`예열 & 히트 소크`,preheatDescription:`대기열의 각 인쇄가 시작되기 전에 베드(및 지원되는 경우 챔버)를 가열하고 온도를 유지합니다. 챔버 능동 가열이 없는 프린터에서 엔지니어링 필라멘트(PA, ABS) 인쇄에 유용합니다. 소크 타이머가 진행되는 동안 베드 복사열로 챔버가 데워집니다. 베드 목표 온도는 인쇄 파일에서 읽어오며 챔버 동작은 프린터 모델에 따라 다릅니다.`,preheatEnabled:`예열 & 소크 활성화`,preheatEnabledDesc:`꺼짐일 경우 대기열 인쇄가 즉시 시작됩니다. 각 항목은 인쇄별로 재정의할 수 있습니다.`,preheatFilamentTargetsLabel:`필라멘트별 챔버 목표 (°C)`,preheatFilamentTargetsHint:`Bambuddy는 로드된 AMS 슬롯 중 가장 높은 목표를 선택합니다. 모든 슬롯이 0으로 도출되는 인쇄(PLA, PETG, TPU, PVA)는 예열을 완전히 건너뛰고 즉시 시작합니다.`,preheatFilamentTargetsReset:`기본값으로 재설정`,preheatFilamentTargetsDefaultRow:`기타 / 미매핑`,preheatMaxWait:`최대 대기 (초)`,preheatMaxWaitHelp:`소크로 전환되기 전 챔버 가열 단계의 상한.`,preheatSoak:`소크 (초)`,preheatSoakHelp:`목표 도달 또는 최대 대기 경과 후 유지 시간.`,preheatHardwareTitle:`프린터별 동작:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E는 M141으로 챔버를 능동적으로 가열합니다. X1C/P2S는 챔버 온도를 읽지만 베드 복사열로만 가열됩니다. P1S/P1P/A1/A1 Mini는 챔버 센서가 없어 소크 타이머만 적용됩니다.`,preheatPerItemDesc:`이 인쇄가 시작되기 전에 베드와 챔버를 가열합니다. 기본적으로 설정 → 워크플로의 전역 토글을 사용합니다.`,preheatOverride_inherit:`상속`,preheatOverride_on:`켜기`,preheatOverride_off:`끄기`,calibrationMode_off:`끄기`,calibrationMode_on:`켜기`,calibrationMode_auto:`자동`,preheatTargetOverride:`챔버 목표 재정의 (°C, 비우면 필라멘트 기본값)`,preheatTargetOverrideHelp:`0은 챔버 없이 베드를 가열하고 소크를 실행합니다. 비워 두면 챔버가 필요 없는 인쇄는 예열을 완전히 건너뜁니다.`,plateClear:`플레이트 비움 확인`,requirePlateClear:`플레이트 비움 확인 필요`,requirePlateClearDescription:`활성화하면 스케줄러가 완료된 작업이 있는 프린터에서 대기 중인 인쇄를 시작하기 전에 프린터별 플레이트 비움 확인을 기다립니다.`,keepBedWarm:`출력 사이에 베드 온도 유지`,keepBedWarmDesc:`플레이트 클리어 확인 대기 중에 아래의 온도 유지 값으로 베드를 유지하여 챔버를 따뜻하게 유지합니다. 다음 출력의 베드 온도가 더 높으면 그 값을 사용합니다. 다음 출력에 챔버 가열이 필요한 경우에만 적용됩니다(ASA, ABS, PA, PC 등). 플레이트 클리어 확인이 활성화되어 있어야 합니다.`,keepWarmBedTemp:`온도 유지 시 베드 온도 (°C)`,keepWarmBedTempHelp:`베드로 챔버를 가열해야 할 때 사용됩니다(온도 유지 중, 그리고 출력 파일에 베드 온도가 없는 경우의 예열 시). 출력 파일의 베드 온도가 더 높으면 항상 그 값이 우선합니다.`,keepWarmMaxMinutes:`온도 유지 종료 시간(분)`,keepWarmMaxMinutesHelp:`이 시간 안에 플레이트를 비우지 않으면 히터를 무기한 켜두지 않고 끕니다.`,gcodeInjection:`G코드 주입`,gcodeInjectionDescription:`자동 인쇄 시스템을 위한 인쇄 시작 및/또는 종료 시 주입할 사용자 지정 G코드를 설정하세요.`,gcodeInjectionNoPrinters:`프린터가 없습니다. G코드 스니펫을 설정하려면 프린터를 추가하세요.`,gcodeStartLabel:`시작 G코드`,gcodeEndLabel:`종료 G코드`,gcodeStartPlaceholder:`인쇄 시작 전 앞에 추가되는 G코드...`,gcodeEndPlaceholder:`인쇄 종료 후 뒤에 추가되는 G코드...`,staggerGroupSize:`그룹 크기`,staggerGroupSizeHelp:`그룹당 동시에 시작할 프린터 수`,staggerInterval:`간격 (분)`,staggerIntervalHelp:`각 그룹 시작 사이의 지연`,queueDrying:`대기열 자동 건조`,queueDryingDescription:`대기 중인 인쇄 사이에 프린터가 유휴 상태일 때 AMS 필라멘트를 자동으로 건조합니다.`,queueDryingEnabled:`자동 건조 활성화`,queueDryingEnabledDescription:`프린터가 유휴 상태이고 습도가 임계값 초과 시 자동으로 AMS 건조 시작`,queueDryingBlock:`건조 완료까지 대기`,queueDryingBlockDescription:`건조가 완료될 때까지 인쇄 대기열을 차단합니다. 끄면 인쇄가 건조보다 우선합니다.`,ambientDryingEnabled:`주변 건조`,ambientDryingEnabledDescription:`대기 중인 인쇄가 없어도 습도가 임계값을 초과하면 유휴 프린터에서 자동으로 필라멘트 건조`,printDryingEnabled:`인쇄 중 건조 계속`,printDryingEnabledDescription:`지원되는 하드웨어(H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L 최신 펌웨어)에서 인쇄 중에도 자동 건조를 계속 실행합니다. 스풀 보호를 위해 건조 온도가 유휴 프리셋보다 자동으로 5°C 낮게 제한됩니다.`,dryingPresets:`건조 프리셋`,dryingPresetsDescription:`필라멘트 유형별 온도 및 시간. AMS 2 Pro는 낮은 온도, AMS-HT는 높은 온도를 지원합니다.`,dryingFilament:`필라멘트`,humidityThresholds:`습도 임계값`,humidityThresholdsDescription:`자동 건조 및 알람용 필라멘트 유형별 습도 임계값. 한 AMS에 혼합 적재 시 가장 낮은 값을 사용합니다.`,humidityThresholdCol:`임계값`,humidityThresholdDefault:`기본값 (알 수 없는 유형)`,printModal:`인쇄 모달`,expandCustomMapping:`사용자 지정 매핑 기본 펼침`,expandCustomMappingDescription:`여러 프린터에 인쇄할 때 프린터별 AMS 매핑을 펼친 상태로 표시`,authentication:`인증`,authEnabledDescription:`인스턴스가 사용자 인증으로 보안됨`,authDisabledDescription:`로그인 필요 및 사용자 접근 관리를 위해 활성화`,authDisabledMessage:`사용자 계정 생성, 권한 관리, Bambuddy 인스턴스 보안을 위해 인증을 활성화하세요.`,enableAuthentication:`인증 활성화`,currentUser:`현재 사용자`,changePassword:`비밀번호 변경`,admin:`관리자`,users:`사용자`,addUser:`사용자 추가`,groups:`그룹`,addGroup:`그룹 추가`,system:`시스템`,noDescription:`설명 없음`,userCount:`{{count}}명의 사용자`,permissionCount:`{{count}}개 권한`,createUser:`사용자 만들기`,username:`사용자명`,enterUsername:`사용자명 입력`,password:`비밀번호`,enterPassword:`비밀번호 입력 (최소 6자)`,confirmPassword:`비밀번호 확인`,confirmPasswordPlaceholder:`비밀번호 확인`,viewReleaseOnGitHub:`GitHub에서 릴리스 보기`,turnAllPlugsOn:`모든 플러그 켜기`,turnAllPlugsOff:`모든 플러그 끄기`,clearNotificationLogs:`알림 로그 지우기`,clearLogsMessage:`30일보다 오래된 모든 알림 로그를 영구적으로 삭제합니다. 이 작업은 취소할 수 없습니다.`,clearLogs:`로그 지우기`,resetUiPreferences:`UI 기본 설정 초기화`,resetUiPreferencesMessage:`모든 UI 기본 설정을 기본값으로 초기화합니다: 사이드바 순서, 테마, 대시보드 레이아웃, 보기 모드, 정렬 기본 설정. 프린터, 아카이브, 서버 설정은 영향받지 않습니다. 지운 후 페이지가 새로고침됩니다.`,resetPreferences:`기본 설정 초기화`,deleteGroupTitle:`그룹 삭제`,deleteGroupMessage:`이 그룹을 삭제하시겠습니까? 이 그룹의 사용자는 이 권한을 잃게 됩니다.`,deleteGroup:`그룹 삭제`,disableAuthenticationTitle:`인증 비활성화`,disableAuthenticationMessage:`인증을 비활성화하시겠습니까? 이렇게 하면 로그인 없이 Bambuddy 인스턴스에 접근할 수 있게 됩니다. 모든 사용자는 데이터베이스에 유지되지만 인증은 비활성화됩니다.`,disableAuthentication:`인증 비활성화`,configureBambuddy:`Bambuddy 설정`,systemDefault:`시스템 기본값`,archiveSettings:`아카이브 설정`,newWindow:`새 창`,embeddedOverlay:`내장 오버레이`,preferredSlicer:`선호하는 슬라이서`,preferredSlicerDescription:`API 사이드카를 통한 앱 내 슬라이싱에 사용되는 슬라이서`,openInSlicerLabel:`슬라이서에서 열기`,openInSlicerInherit:`API 슬라이서와 동일`,openInSlicerDescription:`'슬라이서에서 열기' 버튼이 사용하는 데스크톱 슬라이서입니다. 'API 슬라이서와 동일'로 두어 상속하거나 로컬에서 사용할 다른 슬라이서를 선택하세요.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev에는 Bambu 제작 3MF 파일 슬라이싱을 차단하는 알려진 CLI 버그가 있습니다. 업스트림 수정이 출시될 때까지 Bambu Studio를 사용하는 것이 좋습니다.`,useSlicerApi:`슬라이서 API 사용`,useSlicerApiDescription:`켜면 "슬라이스" 작업이 앱 내 슬라이서 모달을 열고 슬라이서 API 사이드카를 호출합니다. 끄면 URI 스킴을 통해 데스크톱 슬라이서로 전달합니다.`,slicerCard:`슬라이서`,orcaslicerApiUrl:`OrcaSlicer 사이드카 URL`,bambuStudioApiUrl:`Bambu Studio 사이드카 URL`,slicerStallTimeout:`슬라이서 정지 시간 제한(분)`,slicerStallTimeoutDescription:`사이드카에서 이 시간 동안 진행 상황이 없으면 슬라이싱을 중단합니다. 진행 상황을 계속 보고하는 무거운 모델은 아무리 오래 걸려도 중단되지 않습니다. 진행 상황을 보고하지 않는 사이드카에서는 이 값이 전체 시간 제한으로 사용됩니다.`,slicerApiUrlDescription:`슬라이서 API 사이드카 컨테이너의 URL. SLICER_API_URL / BAMBU_STUDIO_API_URL 환경 변수 기본값을 사용하려면 비워두세요.`,externalCameras:`외부 카메라`,costTracking:`비용 추적`,billingEnabled:`결제 기능 사용`,billingEnabledDescription:`사용자에게 인쇄 비용을 청구하고 재무 기능을 사용합니다`,printerKillSwitch:`무단 인쇄 자동 중지`,printerKillSwitchDescription:`승인 없이 시작된 인쇄를 즉시 중지합니다.`,financeBudgetReset:`월별 재무 예산 초기화`,financeBudgetResetDay:`초기화 날짜`,financeBudgetResetDayHelp:`해당 날짜가 없는 짧은 달에는 그 달의 마지막 날에 초기화합니다.`,financeBudgetResetTimezone:`초기화 시간대`,financeBudgetResetTimezoneHelp:`예산 기간의 시작은 이 시간대를 기준으로 계산됩니다.`,rebuildLedger:`지갑 원장 재구성`,rebuildLedgerStarted:`원장 재구성을 시작했습니다`,rebuildLedgerConfirmTitle:`지갑 원장을 재구성하시겠습니까?`,rebuildLedgerConfirmMessage:`과거 잔액 값을 복구하기 위해 지갑 원장을 재구성합니다. 수행 내용을 정확히 아는 경우에만 실행하세요.`,rebuildLedgerInProgress:`재구성 시작 중...`,printsOnly:`인쇄만`,totalConsumption:`총 소비`,dataManagement:`데이터 관리`,storageUsage:`저장소 사용량`,storageUsageDescription:`카테고리별 데이터 사용량 분류`,storageUsageTotal:`총계`,storageUsageErrors:`오류`,storageUsageOtherBreakdown:`기타 (정적 자산, 스크립트, 구성 파일 포함)`,storageUsageSystem:`시스템`,storageUsageData:`데이터`,storageUsageUnavailable:`저장소 사용량 정보 불가`,clearNotificationLogsDescription:`30일보다 오래된 알림 로그 삭제`,resetUiPreferencesDescription:`사이드바 순서, 테마, 보기 모드, 레이아웃 기본 설정 초기화. 프린터, 아카이브, 설정은 영향받지 않습니다.`,enableHomeAssistant:`Home Assistant 활성화`,enableMqtt:`MQTT 활성화`,useTls:`TLS 사용`,enableMetricsEndpoint:`메트릭 엔드포인트 활성화`,availableMetrics:`사용 가능한 메트릭`,editUser:`사용자 편집`,deleteUserTitle:`사용자 삭제`,groupName:`그룹 이름`,leaveEmptyForAnonymous:`익명으로 두려면 비워두세요`,leaveEmptyForNoAuth:`인증 없이 두려면 비워두세요`,enterNewPassword:`새 비밀번호 입력`,confirmNewPassword:`새 비밀번호 확인`,enterGroupName:`그룹 이름 입력`,enterDescriptionOptional:`설명 입력 (선택사항)`,enterCurrentPassword:`현재 비밀번호 입력`,enterNewPasswordMin6:`새 비밀번호 입력 (최소 6자)`,toast:{keyCopied:`키가 클립보드에 복사되었습니다`,copyFailed:`키 복사 실패`,keyAddedToBrowser:`API 브라우저에 키가 추가되었습니다`,clearLogsFailed:`로그 지우기 실패`,uiPreferencesReset:`UI 기본 설정이 초기화되었습니다. 새로고침 중...`,authDisabled:`인증이 성공적으로 비활성화되었습니다`,authDisableFailed:`인증 비활성화 실패`,apiKeyCreated:`API 키가 생성되었습니다`,apiKeyDeleted:`API 키가 삭제되었습니다`,userCreated:`사용자가 성공적으로 생성되었습니다`,userUpdated:`사용자가 성공적으로 업데이트되었습니다`,userDeleted:`사용자가 성공적으로 삭제되었습니다`,groupCreated:`그룹이 성공적으로 생성되었습니다`,groupUpdated:`그룹이 성공적으로 업데이트되었습니다`,groupDeleted:`그룹이 성공적으로 삭제되었습니다`,fillRequiredFields:`모든 필수 항목을 입력하세요`,passwordsDoNotMatch:`비밀번호가 일치하지 않습니다`,passwordTooShort:`비밀번호는 최소 6자여야 합니다`,enterGroupName:`그룹 이름을 입력하세요`,settingsSaved:`설정이 저장되었습니다`,noPermissionUpdate:`설정을 변경할 권한이 없습니다`,cameraSettingsSaved:`카메라 설정이 저장되었습니다`,enterCameraUrl:`카메라 URL을 입력하세요`,passwordChanged:`비밀번호가 성공적으로 변경되었습니다`,connectionFailed:`연결 실패`,testFailed:`테스트 실패`,cameraConnected:`카메라 연결됨{{resolution}}`,cameraConnectedCoalesced:`카메라 연결됨{{resolution}} (이미 진행 중인 캡처와 공유됨)`,passwordNeedsUppercase:`비밀번호에 대문자가 최소 1개 포함되어야 합니다`,passwordNeedsLowercase:`비밀번호에 소문자가 최소 1개 포함되어야 합니다`,passwordNeedsDigit:`비밀번호에 숫자가 최소 1개 포함되어야 합니다`,passwordNeedsSpecial:`비밀번호에 특수문자가 최소 1개 포함되어야 합니다`},testConnection:`연결 테스트`,catalog:{spoolCatalog:`스풀 카탈로그`,spoolCatalogDescription:`브랜드/유형별 빈 스풀 무게. 스풀 추가 시 자동 무게 조회에 사용됩니다.`,searchCatalog:`카탈로그 검색...`,addNewEntry:`새 항목 추가`,namePlaceholder:`이름 (예: Bambu Lab - Plastic)`,weight:`무게`,type:`유형`,default:`기본`,custom:`사용자 지정`,noMatch:`검색에 일치하는 항목 없음`,empty:`카탈로그에 항목 없음`,deleteEntry:`항목 삭제`,deleteConfirm:`"{{name}}"을(를) 삭제하시겠습니까?`,resetCatalog:`카탈로그 초기화`,resetConfirm:`카탈로그를 기본값으로 초기화하시겠습니까? 모든 사용자 지정 항목이 제거됩니다.`,loadFailed:`스풀 카탈로그 로드 실패`,nameWeightRequired:`이름과 무게가 필요합니다`,entryAdded:`항목이 추가되었습니다`,addFailed:`항목 추가 실패`,entryUpdated:`항목이 업데이트되었습니다`,updateFailed:`항목 업데이트 실패`,entryDeleted:`항목이 삭제되었습니다`,deleteFailed:`항목 삭제 실패`,resetSuccess:`카탈로그가 기본값으로 초기화되었습니다`,resetFailed:`카탈로그 초기화 실패`,exported:`{{count}}개 항목이 내보내졌습니다`,imported:`{{added}}개 항목 가져옴 ({{skipped}}개 건너뜀)`,importFailed:`가져오기 실패: 잘못된 JSON 형식`,exportTooltip:`JSON으로 카탈로그 내보내기`,importTooltip:`JSON에서 카탈로그 가져오기`,resetTooltip:`기본값으로 초기화`,selectedCount:`{{count}}개 선택됨`,deleteSelected:`선택 항목 삭제`,bulkDeleteConfirm:`{{count}}개 항목을 삭제하시겠습니까?`,bulkDeleted:`{{count}}개 항목이 삭제되었습니다`,bulkDeleteFailed:`항목 삭제 실패`,material:`재료`,spoolWeight:`스풀 무게`,color:`색상`,updateSpoolWeight:`스풀 무게 업데이트`,filamentUpdated:`필라멘트가 업데이트되었습니다`,filamentUpdateFailed:`필라멘트 업데이트 실패`,filamentUpdateInvalid:`잘못된 필라멘트 데이터`,keepExistingSpoolWeight:`기존 스풀에 이전 무게 유지`,keepExistingSpoolWeightDesc:`이 필라멘트 유형으로 이미 생성된 스풀은 이전 공 무게를 유지합니다. 새 스풀은 업데이트된 값을 사용합니다.`,applyToAllSpools:`모든 스풀에 적용`,applyToAllSpoolsDesc:`이 필라멘트 유형의 모든 무게 계산이 즉시 새 공 무게를 사용합니다.`},colorCatalog:{title:`색상 카탈로그`,description:`제조사/재료별 필라멘트 색상. 스풀 추가 시 자동 색상 조회에 사용됩니다.`,searchColors:`색상 검색...`,allManufacturers:`모든 제조사`,addNewColor:`새 색상 추가`,manufacturer:`제조사`,colorName:`색상 이름`,hex:`헥스`,materialOptional:`재료 (선택사항)`,showing:`{{total}}개 중 {{filtered}}개 색상 표시`,noMatch:`검색에 일치하는 색상 없음`,empty:`카탈로그에 색상 없음`,deleteColor:`색상 삭제`,deleteConfirm:`"{{name}}"을(를) 삭제하시겠습니까?`,resetCatalog:`색상 카탈로그 초기화`,resetConfirm:`카탈로그를 기본값으로 초기화하시겠습니까? 모든 사용자 지정 색상이 제거됩니다.`,sync:`동기화`,starting:`시작 중...`,syncTooltip:`FilamentColors.xyz에서 동기화 (2000개 이상 색상, 약 1분 소요)`,loadFailed:`색상 카탈로그 로드 실패`,fieldsRequired:`제조사, 색상 이름, 헥스 색상이 필요합니다`,colorAdded:`색상이 추가되었습니다`,addFailed:`색상 추가 실패`,colorUpdated:`색상이 업데이트되었습니다`,updateFailed:`색상 업데이트 실패`,colorDeleted:`색상이 삭제되었습니다`,deleteFailed:`색상 삭제 실패`,resetSuccess:`색상 카탈로그가 기본값으로 초기화되었습니다`,resetFailed:`카탈로그 초기화 실패`,syncUpToDate:`이미 최신 상태 ({{count}}개 색상 확인됨)`,syncComplete:`{{added}}개 새 색상 추가됨 ({{skipped}}개 이미 존재)`,syncError:`동기화 오류`,syncFailed:`FilamentColors.xyz에서 동기화 실패`,exported:`{{count}}개 색상이 내보내졌습니다`,imported:`{{added}}개 색상 가져옴 ({{skipped}}개 건너뜀)`,importFailed:`가져오기 실패: 잘못된 JSON 형식`,selectedCount:`{{count}}개 선택됨`,deleteSelected:`선택 항목 삭제`,bulkDeleteConfirm:`{{count}}개 색상을 삭제하시겠습니까?`,bulkDeleted:`{{count}}개 색상이 삭제되었습니다`,bulkDeleteFailed:`색상 삭제 실패`},dateFormat:`날짜 형식`,dateFormatUs:`미국 (MM/DD/YYYY)`,dateFormatEu:`유럽 (DD/MM/YYYY)`,dateFormatIso:`ISO (YYYY-MM-DD)`,timeFormat:`시간 형식`,timeFormat12:`12시간 (오후 3:30)`,timeFormat24:`24시간 (15:30)`,defaultPrinter:`기본 프린터`,defaultPrinterDescription:`업로드, 재인쇄 등 작업에서 이 프린터를 미리 선택합니다.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`사이드바 레이아웃에서 항목 순서를 변경하고, 표시 상태를 초기화하고, 사용자 지정 링크를 관리하세요.`,setDefault:`기본값 설정`,sidebarOrderSetDefaultHint:`기본값 설정은 현재 메뉴 순서를 사용자 지정하지 않은 사용자에게 적용합니다.`,sidebarDefaultSet:`기본 메뉴 순서가 설정되었습니다.`,sidebarDefaultCleared:`기본 메뉴 순서가 지워졌습니다.`,sidebarDefaultFailed:`기본 메뉴 순서 설정 실패.`,reset:`초기화`,darkMode:`다크 모드`,lightMode:`라이트 모드`,active:`(활성)`,background:`배경`,accent:`강조`,style:`스타일`,bgNeutral:`중립`,bgWarm:`따뜻함`,bgCool:`시원함`,bgOled:`OLED 블랙`,bgSlate:`슬레이트 블루`,bgForest:`포레스트 그린`,accentGreen:`그린`,accentTeal:`틸`,accentBlue:`블루`,accentOrange:`오렌지`,accentPurple:`퍼플`,accentRed:`레드`,styleClassic:`클래식`,styleGlow:`글로우`,styleVibrant:`비브런트`,themeToggleHint:`사이드바의 태양/달 아이콘으로 다크 모드와 라이트 모드를 전환하세요.`,progressInTitle:`탭에 인쇄 진행률 표시`,progressInTitleDescription:`브라우저 탭에 진행 중인 인쇄의 백분율과 진행 링을 표시합니다.`,autoArchivePrints:`인쇄 자동 아카이브`,autoArchiveDescription:`인쇄 완료 시 3MF 파일 자동 저장`,saveThumbnailsDescription:`3MF 파일에서 미리보기 이미지 추출 및 저장`,captureFinishPhotoDescription:`인쇄 완료 시 프린터 카메라로 사진 촬영. Bambuddy는 인쇄 중 짧은 타임랩스를 기록하여 베드가 내려가기 전 순간에서 사진을 가져올 수 있도록 합니다. 이 인쇄에 대해 타임랩스를 활성화한 경우 타임랩스 파일이 보관되며, 그렇지 않으면 사진 촬영 후 자동으로 삭제됩니다.`,finishPhotoRestorePlate:`완료 사진을 위해 베드 올리기`,finishPhotoRestorePlateDescription:`프린터는 인쇄가 끝나면 베드를 약 100 mm 내리므로 완성된 출력물이 카메라 화각 아래에 놓입니다. Bambuddy는 베드를 마지막 인쇄 레이어 바로 위까지 다시 올려 사진을 찍은 뒤 다시 내립니다. 출력 높이를 알 수 없거나 다른 작업이 대기 중이면 건너뜁니다.`,ffmpegNotInstalled:`ffmpeg 미설치`,ffmpegRequired:`카메라 캡처에 ffmpeg가 필요합니다. macOS에서는 <brew>brew install ffmpeg</brew>, Linux에서는 <apt>apt install ffmpeg</apt>로 설치하세요.`,camera:`카메라`,cameraViewMode:`카메라 보기 모드`,cameraOverlayDescription:`카메라가 메인 화면의 크기 조절 가능한 오버레이에서 열립니다`,cameraWindowDescription:`카메라가 별도의 브라우저 창에서 열립니다`,externalCamerasDescription:`내장 프린터 카메라를 교체할 외부 카메라를 설정하세요. MJPEG 스트림, RTSP, HTTP 스냅샷, USB 카메라(V4L2)를 지원합니다.`,cameraPlaceholderUsb:`장치 경로 (/dev/video0)`,cameraPlaceholderUrl:`카메라 URL (rtsp://... 또는 http://...)`,cameraTypeMjpeg:`MJPEG 스트림`,cameraTypeRtsp:`RTSP 스트림`,cameraTypeSnapshot:`HTTP 스냅샷`,cameraTypeUsb:`USB 카메라 (V4L2)`,cameraSnapshotUrl:`스냅샷 URL (선택사항)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`알림 썸네일, 완료 사진, 타임랩스, 플레이트 감지에 사용되는 단일 프레임 URL.`,cameraRotation:`회전`,test:`테스트`,connected:`연결됨`,disconnected:`연결 끊김`,currency:`통화`,defaultFilamentCost:`기본 필라멘트 비용 (kg당)`,electricityCost:`kWh당 전기 비용`,energyDisplayMode:`에너지 표시 모드`,energyModePrintDescription:`대시보드가 인쇄 중 사용된 에너지 합계를 표시`,energyModeTotalDescription:`대시보드가 스마트 플러그의 전체 에너지를 표시`,fileManager:`파일 관리자`,createArchiveEntry:`인쇄 시 아카이브 항목 생성`,createArchiveEntryDescription:`파일 관리자에서 인쇄할 때 선택적으로 아카이브 항목 생성`,lowDiskSpaceWarning:`디스크 공간 부족 경고`,lowDiskSpaceDescription:`여유 디스크 공간이 이 임계값 아래로 떨어지면 경고 표시`,printerFirmware:`프린터 펌웨어`,checkFirmwareDescription:`Bambu Lab의 프린터 펌웨어 업데이트 확인`,bambuddySoftware:`Bambuddy 소프트웨어`,autoCheckDescription:`시작 시 자동으로 새 버전 확인`,checkNow:`지금 확인`,updateAvailableVersion:`업데이트 가능: v{{version}}`,releaseNotes:`릴리스 노트`,updateViaDocker:`Docker Compose로 업데이트:`,composeDirectory:`Compose 디렉터리`,composeDirectoryHint:`docker-compose.yml이 있는 디렉터리입니다. 비워 두면 cd를 생략합니다.`,copyUpdateCommand:`업데이트 명령 복사`,updateViaHomeAssistant:`업데이트는 Home Assistant 수퍼바이저에서 관리됩니다. Home Assistant에서 설정 → 애드온 → Bambuddy를 열어 새 버전을 설치하세요.`,updateViaWindowsInstaller:`Windows 설치본은 설치 프로그램을 다시 실행하여 업데이트합니다. 아래에서 새 버전을 다운로드하세요 — 데이터, 설정 및 프린터는 유지됩니다.`,downloadWindowsInstaller:`v{{version}} 설치 프로그램 다운로드`,installUpdate:`업데이트 설치`,latestVersionRunning:`최신 버전을 실행 중입니다`,failedToCheckUpdates:`업데이트 확인 실패: {{error}}`,backupRestore:`백업 및 복원`,backupRestoreDescription:`설정 내보내기/가져오기 및 GitHub 백업 설정`,goToBackup:`백업으로 이동`,externalUrl:`외부 URL`,externalUrlDescription:`Bambuddy에 접근할 수 있는 외부 URL. 알림 이미지 및 외부 통합에 사용됩니다.`,bambuddyUrl:`Bambuddy URL`,externalUrlHint:`프로토콜과 포트를 포함하세요 (예: http://192.168.1.100:8000)`,ftpRetry:`FTP 재시도`,ftpRetryDescription:`프린터 WiFi가 불안정할 때 FTP 작업을 재시도합니다.`,autoRetryDescription:`실패한 FTP 작업 자동 재시도`,retryAttempts:`재시도 횟수`,retryDelay:`재시도 지연`,connectionTimeout:`연결 제한 시간`,time_one:`{{count}}번`,time_other:`{{count}}번`,second_one:`{{count}}초`,second_other:`{{count}}초`,nSeconds:`{{count}}초`,increaseForWeakWifi:`WiFi가 약한 프린터에서 늘리세요`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Home Assistant의 REST API를 통해 스마트 플러그를 제어하려면 연결하세요.`,homeAssistantUrl:`Home Assistant URL`,longLivedAccessToken:`장기 액세스 토큰`,haTokenHint:`HA에서 토큰 생성: 프로필 → 장기 액세스 토큰 → 토큰 생성`,connectionSuccessful:`연결 성공`,connectionFailed:`연결 실패`,haConnectionSuccess:`Home Assistant에 성공적으로 연결되었습니다.`,haConnectionFailed:`Home Assistant 연결 실패.`,mqttPublishing:`MQTT 게시`,mqttDescription:`Node-RED, Home Assistant 등 자동화 시스템과 통합하기 위해 Bambuddy 이벤트를 외부 MQTT 브로커에 게시하세요.`,mqttEnableDescription:`외부 MQTT 브로커에 이벤트 게시`,brokerHostname:`브로커 호스트명`,port:`포트`,usernameOptional:`사용자명 (선택사항)`,passwordOptional:`비밀번호 (선택사항)`,topicPrefix:`토픽 접두사`,topicPrefixHint:`토픽은 다음과 같습니다: {{prefix}}/printers/<serial>/status 등`,prometheusMetrics:`Prometheus 메트릭`,prometheusEndpointDescription:`Prometheus/Grafana 모니터링을 위해 <code>/api/v1/metrics</code>에서 프린터 메트릭을 노출합니다.`,bearerTokenOptional:`베어러 토큰 (선택사항)`,bearerTokenHint:`설정하면 요청에 <code>Authorization: Bearer <token></code>을 포함해야 합니다`,metricsConnectionStatus:`연결 상태`,metricsPrinterState:`프린터 상태 (유휴/인쇄 중/등)`,metricsPrintProgress:`인쇄 진행 0-100%`,metricsBedTemp:`베드 온도`,metricsNozzleTemp:`노즐 온도`,metricsPrintsTotal:`결과별 총 인쇄 수`,metricsMore:`...및 더 많은 것 (레이어, 팬, 대기열, 필라멘트 사용량)`,smartPlugsDescription:`에너지 사용량 추적 및 프린터 전원 제어를 자동화하기 위해 스마트 플러그(Tasmota 또는 Home Assistant)를 연결하세요.`,allOn:`모두 켜기`,allOff:`모두 끄기`,addSmartPlug:`스마트 플러그 추가`,energySummary:`에너지 요약`,currentPower:`현재 전력`,plugsOnline:`{{reachable}}/{{total}}개 플러그 온라인`,today:`오늘`,yesterday:`어제`,total:`총계`,enablePlugsForSummary:`에너지 요약을 보려면 플러그를 활성화하세요`,addNotificationProvider:`추가`,systemBadge:`(시스템)`,creating:`생성 중...`,changing:`변경 중...`,deleteUserAndItems:`사용자 및 항목 삭제`,deleteUserKeepItems:`사용자 삭제, 항목 유지 (소유자 없음)`,ok:`확인`,twoFa:{totpTitle:`인증 앱 (TOTP)`,totpDesc:`Google Authenticator, Aegis, Authy 같은 인증 앱을 사용하세요.`,emailOtpTitle:`이메일 OTP`,emailOtpDesc:`로그인 시 {{email}}로 일회용 코드를 전송합니다.`,emailOtpNoEmail:`이 방법을 활성화하려면 계정에 이메일 주소를 추가하세요.`,addEmailFirst:`계정에 이메일 주소가 없습니다. 이메일 OTP를 활성화하기 전에 관리자에게 추가를 요청하세요.`,setupTotp:`인증 앱 설정`,setupAuthApp:`인증 앱 설정`,setupInstructions:`아래 QR 코드를 인증 앱으로 스캔한 후 코드로 확인하세요.`,manualEntry:`스캔할 수 없나요? 이 비밀을 수동으로 입력하세요:`,scannedContinue:`코드를 스캔했습니다 — 계속`,enterCodeToConfirm:`인증 앱의 6자리 코드를 입력하여 설정을 확인하세요.`,activate:`활성화`,disableTotp:`인증기 비활성화`,disableConfirmHint:`인증기를 비활성화하려면 유효한 TOTP 코드나 백업 코드를 입력하세요.`,totpDisabled:`인증 앱이 비활성화되었습니다.`,emailOtpEnabled:`이메일 OTP가 활성화되었습니다.`,emailOtpDisabled:`이메일 OTP가 비활성화되었습니다.`,smtpRequired:`먼저 SMTP 설정을 구성하고 테스트하세요.`,invalidCode:`잘못된 코드입니다. 다시 시도하세요.`,enableEmailOtp:`이메일 OTP 활성화`,disableEmailOtp:`이메일 OTP 비활성화`,emailSetupEnterCode:`이메일 주소로 인증 코드가 전송되었습니다. 아래에 입력하여 이 받은 편지함을 소유하고 있음을 확인하세요.`,verifyAndEnable:`확인 및 활성화`,emailDisablePasswordHint:`이메일 OTP 비활성화를 확인하려면 계정 비밀번호를 입력하세요.`,passwordPlaceholder:`비밀번호 입력`,backupCodesTitle:`백업 코드 저장`,backupCodesWarning:`이 코드를 안전한 곳에 저장하세요. 각 코드는 한 번만 사용할 수 있으며 다시 표시되지 않습니다.`,backupCodesRemaining:`{{count}}개 백업 코드 남음`,savedCodes:`코드를 저장했습니다`,regenBackup:`백업 코드 재생성`,regenBackupHint:`현재 TOTP 코드를 입력하여 10개의 새 백업 코드를 생성하세요. 기존 백업 코드는 모두 무효화됩니다.`,newBackupCodes:`새 백업 코드`,linkedAccounts:`연결된 SSO 계정`,linkedAccountsDesc:`이 외부 ID 제공자가 계정에 연결되어 있습니다.`,oidcUnlinked:`계정 연결이 해제되었습니다.`},sessionPolicy:{title:`세션 정책`,description:`신규 사용자 로그인의 최대 세션 수명입니다. 이미 발급된 토큰은 원래 만료 시간을 유지합니다.`,preset24h:`24시간`,preset7d:`7일`,preset30d:`30일`,customHoursLabel:`사용자 지정 세션 수명(시간)`,hoursSuffix:`시간`,warning:`세션이 길어질수록 자동 로그아웃 보호가 약해집니다. 신뢰할 수 있는 단일 사용자 배포에서만 권장됩니다.`},oidc:{title:`SSO / OIDC 제공자`,desc:`외부 ID 제공자를 통해 싱글 사인온을 허용하도록 OpenID Connect 제공자를 설정하세요.`,addProvider:`제공자 추가`,newProvider:`새 제공자`,empty:`아직 설정된 OIDC 제공자가 없습니다.`,created:`제공자가 생성되었습니다.`,updated:`제공자가 업데이트되었습니다.`,deleted:`제공자가 삭제되었습니다.`,deleteTitle:`제공자 삭제`,deleteMessage:`"{{name}}"을(를) 삭제하시겠습니까? 연결된 모든 사용자 계정의 연결이 해제됩니다.`,form:{name:`표시 이름`,issuerUrl:`발급자 URL`,clientId:`클라이언트 ID`,clientSecret:`클라이언트 시크릿`,scopes:`범위`,iconUrl:`아이콘 URL (선택사항)`,enabled:`활성화됨`,autoCreate:`사용자 자동 생성`,autoCreateDesc:`첫 번째 로그인 시 자동으로 로컬 계정 생성.`,autoLink:`기존 계정 자동 연결`,autoLinkDesc:`첫 번째 로그인 시 이메일 일치로 기존 로컬 계정 연결.`,secretHint:`현재 값을 유지하려면 비워두세요`,secretPlaceholder:`새 시크릿`,emailClaim:`이메일 클레임`,emailClaimDesc:`이메일 ID로 사용되는 JWT 클레임.`,emailClaimPlaceholder:`email`,emailClaimCustomClaimAutoLinkWarning:`사용자 지정 클레임은 값이 테넌트 관리인 경우에만 자동 연결에 안전합니다. IdP가 사용자가 이 클레임을 직접 주장할 수 있게 하면 자동 연결을 활성화하지 마세요.`,requireEmailVerified:`이메일 확인 필요`,requireEmailVerifiedDesc:`제공자가 확인된 것으로 표시한 경우에만 이메일 클레임을 수락합니다.`,requireEmailVerifiedWarning:`경고: 확인 없이도 이메일이 수락됩니다. 신뢰할 수 있는 제공자에만 사용하세요.`,requireEmailVerifiedAutoLink:`이 설정을 변경하려면 먼저 자동 연결을 비활성화하세요.`,defaultGroup:`기본 그룹`,defaultGroupDesc:`자동 생성된 사용자에게 할당되는 그룹. 설정되지 않으면 Viewers로 대체됩니다.`,defaultGroupViewersFallback:`Viewers (기본값)`,autologin:`자동 로그인`,autologinDesc:`인증되지 않은 방문자를 이 공급자로 바로 리디렉션합니다. 이 플래그를 가질 수 있는 공급자는 하나뿐입니다.`},refreshIcon:`아이콘 새로고침`,removeIcon:`아이콘 제거`,iconRefreshed:`아이콘이 새로고침되었습니다.`,iconRemoved:`아이콘이 제거되었습니다.`,iconFetchFailed:`공급자 URL에서 아이콘을 가져올 수 없습니다.`},encryption:{title:`MFA 암호화 상태`,enabledFromEnv:`저장 시 암호화 활성화됨 (MFA_ENCRYPTION_KEY 환경 변수에서 키)`,enabledFromFile:`저장 시 암호화 활성화됨 (데이터 디렉토리에서 키 로드됨)`,enabledGenerated:`자동 생성된 키로 저장 시 암호화 활성화됨`,notConfigured:`저장 시 암호화가 설정되지 않음`,notConfiguredDesc:`TOTP 시크릿 및 OIDC client_secret이 일반 텍스트로 저장됩니다. MFA_ENCRYPTION_KEY를 설정하거나 쓰기 가능한 데이터 디렉토리로 Bambuddy를 재시작하여 자동 생성하세요.`,allEncrypted:`모든 MFA 시크릿이 저장 시 암호화되어 있습니다.`,legacyRowsLabel:`레거시 일반 텍스트 행`,encryptedRowsLabel:`암호화된 행`,legacyRowsWarning:`{{count}}개 레거시 일반 텍스트 행이 감지되었습니다. 암호화된 저장소로 마이그레이션하려면 OIDC 제공자를 다시 저장하거나 사용자의 인증 앱을 재등록하세요.`,backupHint:`자동 생성된 키는 DATA_DIR/.mfa_encryption_key에 저장되며 로컬 백업 ZIP에 포함됩니다. 백업을 안전하게 보관하거나 MFA_ENCRYPTION_KEY를 명시적으로 설정하세요.`,decryptionBrokenTitle:`암호화 키 누락`,decryptionBrokenError:`암호화 키를 더 이상 사용할 수 없어 {{count}}개의 암호화된 레코드를 복호화할 수 없습니다.`,migrationErrorWarning:`시작 시 {{count}}개 레거시 행을 재암호화하지 못했습니다. 서버 로그를 확인하고 Bambuddy를 재시작하여 재시도하세요.`},updateEnergyCost:`전기 요금 업데이트`,updateEnergyCostDescription:`이 키가 /settings/electricity-price에 새 kWh당 전기 요금을 POST할 수 있도록 허용합니다. Home Assistant 동적 요금 자동화(Tibber, Octopus 등)에 유용합니다. API 키로 쓸 수 있는 유일한 설정 필드입니다.`,energyCostBadge:`에너지`,passwordRequirements:`최소 8자, 대문자, 소문자, 숫자, 특수문자 각 1개 이상 포함`,pipelineLimits:{title:`슬라이서 파이프라인 한도`,maxCopiesLabel:`실행당 최대 사본 수`,maxCopiesDesc:`운영자가 파이프라인 실행 시 요청할 수 있는 사본 수의 상한. 서버 측 절대 상한은 1000입니다.`},pipelines:{title:`슬라이서 파이프라인`,subtitle:`재사용 가능한 프리셋 묶음(프린터 + 프로세스 + 필라멘트 + 베드 유형). 슬라이스 대화상자에서 저장한 후 다음 파일에 한 번의 클릭으로 적용하세요.`,loading:`파이프라인 불러오는 중…`,loadError:`파이프라인을 불러오지 못했습니다.`,confirmDelete:`이 파이프라인을 삭제하시겠습니까? 되돌릴 수 없습니다.`,staleWarning:`참조된 프리셋이 더 이상 존재하지 않습니다. 슬라이스 대화상자에서 이 파이프라인을 다시 저장하여 수정하세요.`,empty:{title:`아직 파이프라인이 없습니다.`,howto:`임의의 파일에서 슬라이스 대화상자를 열고 프린터 / 프로세스 / 필라멘트 / 베드를 선택한 다음 "파이프라인으로 저장"을 클릭하세요. 저장된 파이프라인이 여기에 표시됩니다.`},field:{name:`파이프라인 이름`,description:`설명`,targetPrinter:`대상 프린터`,noTarget:`— 대상 없음 —`,targetKind:`대상 유형`,targetKindSpecific:`특정 프린터`,targetKindClass:`프린터 클래스`,targetModelClass:`프린터 모델`,fanoutStrategy:`분산 전략`,fanout:{max_parallel:`최대 병렬 — 일치하는 유휴 프린터에 분산`,round_robin:`라운드 로빈 — 적격 프린터를 순환`,fill_one_first:`하나 먼저 채우기 — 모든 사본을 한 프린터에 고정`},fanoutShort:{max_parallel:`병렬`,round_robin:`라운드 로빈`,fill_one_first:`하나 먼저`}},action:{save:`저장`,cancel:`취소`,rename:`이름 변경`,delete:`삭제`},slot:{printer:`프린터`,process:`프로세스`,filament:`필라멘트`,filamentN:`필라멘트 {{n}}`,filamentAll:`전체 {{n}} 슬롯`,bed:`베드`},group:{profiles:`프로필`,filaments:`필라멘트`},searchPlaceholder:`파이프라인 검색…`,filterTargetType:`대상 유형으로 필터`,filterTarget:`대상으로 필터`,filter:{all:`모든 대상`,noTarget:`대상 미설정`,count:`{{shown}} / {{total}}`,noMatches:`현재 필터와 일치하는 파이프라인이 없습니다.`},toast:{saved:`파이프라인이 저장되었습니다`,saveFailed:`저장 실패`,deleted:`파이프라인이 삭제되었습니다`,deleteFailed:`삭제 실패`},noTargetHint:`실행하려면 대상 프린터를 설정하세요`,noTargetWarning:`이 파이프라인을 실행하기 전에 대상 프린터를 설정하세요.`,runs:{lastRun:`마지막 실행`,status:{queued:`대기 중`,slicing:`슬라이싱 중`,dispatching:`전송 중`,in_progress:`인쇄 중`,completed:`완료됨`,failed:`실패`,partial_failure:`부분 실패`,cancelled:`취소됨`}}}},notification:{printStarted:{title:`인쇄 시작됨`,body:`{{printer}}: {{filename}} 인쇄가 시작되었습니다`},printCompleted:{title:`인쇄 완료됨`,body:`{{printer}}: {{filename}}이(가) 성공적으로 완료되었습니다`},printFailed:{title:`인쇄 실패`,body:`{{printer}}: {{filename}}이(가) 실패했습니다`},printStopped:{title:`인쇄 정지됨`,body:`{{printer}}: {{filename}}이(가) 정지되었습니다`},printProgress:{title:`인쇄 진행`,body:`{{printer}}: {{filename}} {{percent}}% 완료`},printerOffline:{title:`프린터 오프라인`,body:`{{printer}}이(가) 오프라인 상태입니다`},printerError:{title:`프린터 오류`,body:`{{printer}}: {{error}}`},filamentLow:{title:`필라멘트 부족`,body:`{{printer}}: 필라멘트가 부족합니다`},maintenanceDue:{title:`유지보수 예정`,body:`{{printer}}: {{items}} 주의 필요`}},errors:{generic:`문제가 발생했습니다`,networkError:`네트워크 오류. 연결을 확인하세요.`,notFound:`찾을 수 없습니다`,unauthorized:`권한 없음`,serverError:`서버 오류`,validationError:`입력값을 확인하세요`,printerConnectionFailed:`프린터 연결 실패`,saveFailed:`변경사항 저장 실패`,deleteFailed:`삭제 실패`,loadFailed:`데이터 로드 실패`},hmsErrors:{title:`오류 - {{name}}`,noErrors:`오류 없음`,viewOnWiki:`Bambu Lab 위키에서 보기`,mqttVerifyFailedRemedy:`프린터에서 개발자 모드를 활성화하고 프린터를 재시작한 다음 작업을 다시 시작하세요.`,unknownCode:`알 수 없는 HMS 코드 — 자세한 내용은 Bambu Lab 위키를 참조하세요.`,clearInstructions:`오류를 해제하려면 프린터에서 오류를 지우세요.`,clearErrors:`오류 지우기`,clearSuccess:`HMS 오류가 지워졌습니다`,clearFailed:`HMS 오류 지우기 실패`,actionSuccess:`프린터에 작업을 전송함`,actionFailed:`작업 전송 실패`,runoutExpectedSlot:`{{ranOut}}의 필라멘트가 소진되었습니다. 프린터가 이제 {{expected}}에 호환 필라멘트를 기다리고 있습니다. {{expected}}에 스풀을 넣은 다음 다시 시도를 선택하세요.`,runoutExpectedSlotOnly:`프린터가 {{expected}}에 호환 필라멘트를 기다리고 있습니다. 거기에 스풀을 넣은 다음 다시 시도를 선택하세요.`,runoutSlotUnknown:`필라멘트가 소진되어 인쇄가 일시정지되었습니다. Bambuddy가 프린터가 현재 요청하는 슬롯을 확인할 수 없습니다 — 프린터 화면에서 요청된 슬롯을 확인하세요.`,actions:{RESUME_PRINTING:`인쇄 재개`,RESUME_PRINTING_DEFECTS:`재개 (결함 허용)`,RESUME_PRINTING_PROBELM_SOLVED:`재개 (문제 해결됨)`,STOP_PRINTING:`인쇄 중지`,CHECK_ASSISTANT:`도우미 보기`,FILAMENT_EXTRUDED:`필라멘트 압출됨, 계속`,RETRY_FILAMENT_EXTRUDED:`아직 압출되지 않음, 다시 시도`,CONTINUE:`완료, 계속`,LOAD_VIRTUAL_TRAY:`필라멘트 로드`,OK_BUTTON:`확인`,FILAMENT_LOAD_RESUME:`필라멘트 로드됨, 재개`,JUMP_TO_LIVEVIEW:`실시간 보기`,NO_REMINDER_NEXT_TIME:`다음에 알리지 않음`,REFRESH_NOZZLE:`다시 확인`,IGNORE_NO_REMINDER_NEXT_TIME:`무시 및 다시 알리지 않음`,IGNORE_RESUME:`무시하고 재개`,PROBLEM_SOLVED_RESUME:`문제 해결됨, 재개`,TURN_OFF_FIRE_ALARM:`확인, 화재 경보 끄기`,RETRY_PROBLEM_SOLVED:`다시 시도 (문제 해결됨)`,CANCLE:`취소`,STOP_DRYING:`건조 중지`,PROCEED:`계속`,OK_JUMP_RACK:`확인`,ABORT:`중단`,DISABLE_PURIFICATION:`이 인쇄에 대해 공기 정화 비활성화`,DONT_REMIND_NEXT_TIME:`알리지 않음`,DBL_CHECK_CANCEL:`취소`,DBL_CHECK_DONE:`완료`,DBL_CHECK_RETRY:`다시 시도`,DBL_CHECK_RESUME:`재개`,DBL_CHECK_OK:`확인`,REMOVE_CLOSE_BTN:`닫기`}},mqttDebug:{title:`MQTT 디버그 로그`,searchPlaceholder:`토픽 또는 페이로드 검색...`,noMessages:`아직 기록된 메시지 없음`,startLoggingHint:`"로깅 시작"을 클릭하여 MQTT 메시지 캡처 시작`,noMessagesMatch:`필터에 일치하는 메시지 없음`,adjustFilterHint:`검색 또는 필터 기준을 조정해 보세요`,incoming:`수신`,outgoing:`송신`,loggingStopped:`로깅 정지됨`,loggingActive:`로깅 활성 - 메시지가 자동 새로고침됨`,startLogging:`로깅 시작`,stopLogging:`로깅 정지`,clearLog:`로그 지우기`,topic:`토픽`,timestamp:`타임스탬프`,direction:`방향`,all:`전체`},printerFiles:{zipStarted_one:`{{count}}개 파일의 ZIP 다운로드를 시작했습니다`,zipStarted_other:`{{count}}개 파일의 ZIP 다운로드를 시작했습니다`,zipPartial:`{{total}}개 중 {{successful}}개 파일로 ZIP 다운로드를 시작했습니다. 나머지는 가져오지 못했습니다`,downloadFailed:`다운로드 실패: {{error}}`,unknownError:`알 수 없는 오류`,shiftSelectHint:`Shift 키를 누른 채 클릭하여 범위 선택`,selectFile:`{{name}} 선택`,deselectFile:`{{name}} 선택 해제`,title:`파일 관리자`,storageUsed:`사용됨:`,storageFree:`여유:`,filterPlaceholder:`파일 필터...`,deleteButton:`삭제`,deleteFiles:`{{count}}개 파일 삭제`,deleteFileConfirm:`"{{name}}"을(를) 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.`,deleteFilesConfirm:`선택된 {{count}}개 파일을 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.`,noFiles:`프린터에 파일 없음`,printerUnavailable:`프린터 파일 서비스를 사용할 수 없습니다. 프린터에 연결할 수 있을 때 다시 시도하세요.`,loadingFiles:`파일 로딩 중...`,failedToLoad:`파일 로드 실패`,toast:{filesDeleted:`{{count}}개 파일이 삭제되었습니다`,deleteFailed:`삭제 실패: {{error}}`}},confirm:{delete:`이것을 삭제하시겠습니까?`,unsavedChanges:`저장되지 않은 변경사항이 있습니다. 정말 나가시겠습니까?`,clearQueue:`대기열을 지우시겠습니까?`},login:{title:`Bambuddy 로그인`,subtitle:`계정에 로그인하세요`,username:`사용자명`,usernamePlaceholder:`사용자명을 입력하세요`,usernameOrEmail:`사용자명 또는 이메일`,usernameOrEmailPlaceholder:`사용자명 또는 @ 이메일`,password:`비밀번호`,passwordPlaceholder:`비밀번호를 입력하세요`,signIn:`로그인`,signingIn:`로그인 중...`,rememberMe:`로그인 유지`,forgotPassword:`비밀번호를 잊으셨나요?`,autologinFailed:`SSO 자동 로그인에 실패했습니다. 아래에서 계속할 공급자를 선택하세요.`,localDisabledNotice:`로컬 로그인이 비활성화되어 있습니다. 아래 SSO 공급자 중 하나를 사용하세요.`,loginSuccess:`성공적으로 로그인되었습니다`,loginFailed:`로그인 실패`,enterCredentials:`사용자명과 비밀번호를 입력하세요`,enterEmail:`이메일 주소를 입력하세요`,oidcLoginFailed:`OIDC 로그인 실패`,oidcErrors:{providerError:`ID 제공자에서 오류가 반환되었습니다`,missingParameters:`OIDC 콜백에 필수 매개변수가 없습니다`,invalidState:`OIDC 상태가 잘못되었거나 이미 사용되었습니다`,stateExpired:`OIDC 로그인 세션이 만료되었습니다 — 다시 시도하세요`,providerNotFound:`OIDC 제공자를 찾을 수 없습니다`,discoveryFailed:`OIDC 검색 문서를 가져오지 못했습니다`,invalidDiscovery:`OIDC 검색 문서가 잘못되었습니다`,networkError:`OIDC 토큰 교환 중 네트워크 오류`,badResponse:`OIDC 토큰 교환 중 예상치 못한 응답`,noIdToken:`OIDC 제공자가 ID 토큰을 반환하지 않았습니다`,validationFailed:`OIDC 토큰 검증 실패`,nonceMismatch:`OIDC 논스 불일치 — 재생 공격 가능성`,missingSubClaim:`OIDC 토큰에 sub 클레임이 없습니다`,noLinkedAccount:`OIDC ID에 연결된 로컬 계정이 없습니다`,accountInactive:`계정이 비활성 상태입니다`,userResolutionFailed:`계정 확인 실패`,internalError:`OIDC 로그인 중 내부 오류 발생`,tokenExchangeFailed:`OIDC 토큰 교환 실패`},forgotPasswordTitle:`비밀번호 찾기`,forgotPasswordMessage:`비밀번호를 잊으셨다면 시스템 관리자에게 초기화를 요청하세요.`,forgotPasswordEmailMessage:`이메일 주소를 입력하면 새 비밀번호를 전송해 드립니다.`,emailAddress:`이메일 주소`,emailPlaceholder:`your.email@example.com`,cancel:`취소`,sending:`전송 중...`,sendResetEmail:`초기화 이메일 전송`,howToReset:`비밀번호 초기화 방법:`,resetStep1:`Bambuddy 관리자에게 문의하세요`,resetStep2:`사용자 관리에서 비밀번호 초기화를 요청하세요`,resetStep3:`관리자가 임시 비밀번호를 설정해 드립니다`,resetStep4:`새 비밀번호로 로그인하고 설정에서 변경하세요`,gotIt:`확인`,resetPassword:{title:`새 비밀번호 설정`,subtitle:`아래에 새 비밀번호를 입력하고 확인하세요.`,newPassword:`새 비밀번호`,newPasswordPlaceholder:`최소 8자`,confirmPassword:`비밀번호 확인`,confirmPasswordPlaceholder:`새 비밀번호 반복`,saving:`저장 중…`,submit:`새 비밀번호 설정`,backToLogin:`로그인으로 돌아가기`,passwordsDoNotMatch:`비밀번호가 일치하지 않습니다`,passwordTooShort:`비밀번호는 최소 8자여야 합니다`,resetFailed:`비밀번호 초기화 실패. 링크가 만료되었을 수 있습니다.`},twoFA:{title:`이중 인증`,subtitle:`계정이 2FA로 보호되어 있습니다. 아래에 인증 코드를 입력하세요.`,methodAuthenticator:`인증 앱`,methodEmail:`이메일 코드`,methodBackup:`백업 코드`,instructionsTotp:`인증 앱을 열고 Bambuddy의 6자리 코드를 입력하세요.`,instructionsEmail:`이메일 주소로 6자리 코드가 전송되었습니다. 10분 후 만료됩니다.`,instructionsEmailNotSent:`아래 버튼을 클릭하여 이메일로 인증 코드를 받으세요.`,instructionsBackup:`8자리 백업 복구 코드 중 하나를 입력하세요. 각 코드는 한 번만 사용할 수 있습니다.`,sendCodeButton:`이메일로 코드 전송`,sendingCode:`전송 중...`,resendCode:`코드 재전송`,codeLabel:`인증 코드`,backupCodeLabel:`백업 코드`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`확인`,verifyingButton:`확인 중...`,backToLogin:`← 로그인으로 돌아가기`,orContinueWith:`또는 계속`,signInWith:`{{provider}}로 로그인`,enterCode:`인증 코드를 입력하세요`,sendCodeFailed:`인증 코드 전송 실패`,invalidCode:`잘못된 코드입니다. 다시 시도하세요.`}},setup:{title:`Bambuddy 설정`,subtitle:`Bambuddy 인스턴스의 인증을 설정하세요`,enableAuth:`인증 활성화`,adminAccount:`관리자 계정`,adminAccountDesc:`관리자 사용자가 이미 있는 경우 기존 관리자 계정으로 인증이 활성화됩니다. 기존 관리자를 사용하려면 아래 필드를 비워두거나, 새 관리자 사용자를 만들려면 자격 증명을 입력하세요.`,adminUsername:`관리자 사용자명`,adminPassword:`관리자 비밀번호`,optionalIfAdminExists:`(관리자 사용자가 있는 경우 선택사항)`,adminUsernamePlaceholder:`관리자 사용자명 입력 (선택사항)`,adminPasswordPlaceholder:`관리자 비밀번호 입력 (선택사항)`,confirmPassword:`비밀번호 확인`,confirmPasswordPlaceholder:`관리자 비밀번호 확인`,settingUp:`설정 중...`,completeSetup:`설정 완료`,toast:{authEnabledAdminCreated:`인증 활성화 및 관리자 사용자 생성됨`,authEnabledExistingAdmins:`기존 관리자 사용자로 인증 활성화됨`,setupCompleted:`설정이 완료되었습니다`,enterBothCredentials:`관리자 사용자명과 비밀번호를 모두 입력하거나, 기존 관리자 사용자를 사용하려면 둘 다 비워두세요`,passwordsDoNotMatch:`비밀번호가 일치하지 않습니다`,passwordTooShort:`비밀번호는 최소 6자여야 합니다`}},changePassword:{title:`비밀번호 변경`,currentPassword:`현재 비밀번호`,currentPasswordPlaceholder:`현재 비밀번호 입력`,newPassword:`새 비밀번호`,newPasswordPlaceholder:`새 비밀번호 입력 (최소 6자)`,confirmPassword:`새 비밀번호 확인`,confirmPasswordPlaceholder:`새 비밀번호 확인`,passwordsDoNotMatch:`비밀번호가 일치하지 않습니다`,passwordTooShort:`비밀번호는 최소 6자여야 합니다`,changing:`변경 중...`,success:`비밀번호가 성공적으로 변경되었습니다`,failed:`비밀번호 변경 실패`},plateAlert:{title:`인쇄 일시정지됨!`,message:`빌드 플레이트에 객체가 감지되었습니다. 인쇄가 자동으로 일시정지되었습니다. 플레이트를 비우고 인쇄를 재개하세요.`,understand:`확인했습니다`},camera:{title:`카메라 보기`,invalidPrinterId:`유효하지 않은 프린터 ID`,live:`실시간`,snapshot:`스냅샷`,restartStream:`스트림 재시작`,refreshSnapshot:`스냅샷 새로고침`,fullscreen:`전체 화면`,exitFullscreen:`전체 화면 종료`,connectingToCamera:`카메라에 연결 중...`,capturingSnapshot:`스냅샷 캡처 중...`,connectionLost:`연결 끊김`,connectionFailed:`카메라 연결 실패`,reconnecting:`{{countdown}}초 후 재연결 중... (시도 {{attempt}}/{{max}})`,reconnectNow:`지금 재연결`,cameraUnavailable:`카메라를 사용할 수 없음`,cameraUnavailableDesc:`프린터가 켜져 있고 연결되어 있는지 확인하세요.`,noCamera:`사용 가능한 카메라 없음`,retry:`다시 시도`,cameraStream:`카메라 스트림`,zoomOut:`축소`,zoomIn:`확대`,resetZoom:`배율 초기화`,recording:`녹화 중`,startRecording:`녹화 시작`,stopRecording:`녹화 중지`,chamberLight:`챔버 조명 전환`,unavailable:`카메라 사용 불가`,diagnose:{button:`진단`,modalTitle:`카메라 진단`,running:`진단 실행 중...`,runFailed:`진단 실행 실패: {{error}}`,retry:`다시 실행`,stage:{tcp_reachable:`네트워크 연결 가능 여부`,first_frame:`프레임 캡처`,live_stream_active:`라이브 스트림 활성`},summary:{all_ok:`카메라가 정상 작동 중입니다. 모든 단계를 성공적으로 완료했습니다.`,live_stream_active_healthy:`카메라가 최근 프레임으로 스트리밍 중입니다 — 테스트가 필요 없습니다.`,printer_unreachable:`프린터에 연결할 수 없습니다. IP 주소, 네트워크 연결, 프린터 전원을 확인하세요.`,camera_port_closed:`프린터에 연결됐지만 카메라 포트가 닫혀 있습니다. 프린터 설정에서 LAN 전용 모드와 개발자 모드가 활성화되어 있는지 확인하세요.`,no_frame:`카메라에 연결됐지만 프레임이 수신되지 않았습니다. 다시 시도하거나 프린터 설정에서 카메라가 활성화되어 있는지 확인하세요.`,unknown_failure:`알 수 없는 이유로 카메라 진단에 실패했습니다. 지원 로그를 확인하세요.`},meta:{protocol:`프로토콜`,port:`포트`,profile:`프로파일`}}},groups:{title:`그룹 관리`,subtitle:`접근 제어를 위한 권한 그룹 관리`,backToSettings:`설정으로 돌아가기`,createGroup:`그룹 생성`,noPermission:`이 페이지에 접근할 권한이 없습니다.`,system:`시스템`,noDescription:`설명 없음`,usersCount:`{{count}}명의 사용자`,permissionsCount:`{{count}}개의 권한`,edit:`편집`,delete:`삭제`,toast:{created:`그룹이 성공적으로 생성되었습니다`,updated:`그룹이 성공적으로 업데이트되었습니다`,deleted:`그룹이 성공적으로 삭제되었습니다`,enterGroupName:`그룹 이름을 입력해 주세요`},modal:{editGroup:`그룹 편집`,createGroup:`그룹 생성`,cancel:`취소`,saving:`저장 중...`,creating:`생성 중...`,saveChanges:`변경 사항 저장`},form:{groupName:`그룹 이름`,groupNamePlaceholder:`그룹 이름 입력`,systemGroupWarning:`시스템 그룹 이름은 변경할 수 없습니다`,description:`설명`,descriptionPlaceholder:`설명 입력 (선택사항)`,permissions:`권한 ({{count}}개 선택됨)`},deleteModal:{title:`그룹 삭제`,message:`이 그룹을 삭제하시겠습니까? 이 그룹의 사용자는 해당 권한을 잃게 됩니다.`,confirm:`그룹 삭제`},editor:{title:`그룹 편집`,createTitle:`그룹 생성`,search:`권한 검색...`,selectAll:`모두 선택`,clearAll:`모두 해제`,permissionsSelected:`{{count}}개 선택됨`,noResults:`검색과 일치하는 권한이 없습니다`,websocketHint:`실시간 업데이트에 필요합니다. 이 권한이 없으면 인터페이스는 주기적 폴링으로 대체됩니다.`}},users:{title:`사용자 관리`,subtitle:`Bambuddy 인스턴스에 대한 사용자 및 접근 권한 관리`,backToSettings:`설정으로 돌아가기`,createUser:`사용자 생성`,noPermission:`이 페이지에 접근할 권한이 없습니다.`,admin:`관리자`,noGroups:`그룹 없음`,active:`활성`,inactive:`비활성`,edit:`편집`,delete:`삭제`,system:`시스템`,noGroupsAvailable:`사용 가능한 그룹 없음`,table:{username:`사용자 이름`,groups:`그룹`,status:`상태`,actions:`작업`},toast:{created:`사용자가 성공적으로 생성되었습니다`,updated:`사용자가 성공적으로 업데이트되었습니다`,deleted:`사용자가 성공적으로 삭제되었습니다`,fillRequired:`모든 필수 항목을 입력해 주세요`,passwordsDoNotMatch:`비밀번호가 일치하지 않습니다`,passwordTooShort:`비밀번호는 최소 6자 이상이어야 합니다`,ldapProvisioned:`LDAP 사용자 "{{username}}"이(가) 생성되었습니다`},modal:{createUser:`사용자 생성`,editUser:`사용자 편집`,cancel:`취소`,creating:`생성 중...`,saving:`저장 중...`,saveChanges:`변경 사항 저장`,advancedAuthSubtitle:`고급 인증 사용`,tabsAriaLabel:`사용자 소스`,localTab:`로컬`,ldapTab:`LDAP`,ldapSearchLabel:`디렉터리 검색`,ldapSearchPlaceholder:`사용자명, 이름, 이메일을 입력하세요...`,ldapMinChars:`검색하려면 최소 2자 이상 입력하세요`,ldapTypeToSearch:`LDAP 디렉터리를 검색하려면 입력을 시작하세요`,ldapSearching:`디렉터리 검색 중...`,ldapNoResults:`디렉터리에서 일치하는 사용자가 없습니다`,ldapSearchError:`디렉터리 검색에 실패했습니다. LDAP 서버 상태를 확인하세요.`,ldapAlreadyProvisioned:`이미 생성됨`,ldapSelectedLabel:`선택됨`,ldapProvision:`사용자 생성`,ldapProvisioning:`생성 중...`,ldapErrorProvision:`생성에 실패했습니다. LDAP 서버 상태를 확인하고 다시 시도하세요.`},form:{username:`사용자 이름`,usernamePlaceholder:`사용자 이름 입력`,email:`이메일`,emailPlaceholder:`user@example.com`,password:`비밀번호`,passwordPlaceholder:`비밀번호 입력`,confirmPassword:`비밀번호 확인`,confirmPasswordPlaceholder:`비밀번호 확인`,newPasswordPlaceholder:`새 비밀번호 입력`,confirmNewPasswordPlaceholder:`새 비밀번호 확인`,leaveBlankToKeep:`현재 비밀번호 유지 시 비워두기`,groups:`그룹`,optional:`선택사항`,autoGeneratedPassword:`안전한 비밀번호가 자동으로 생성되어 사용자에게 이메일로 전송됩니다.`,passwordManagedByAdvancedAuth:`비밀번호는 고급 인증에 의해 관리됩니다. "비밀번호 재설정"을 사용하여 이메일로 새 비밀번호를 전송하세요.`,resetPassword:`비밀번호 재설정`,resettingPassword:`비밀번호 재설정 중...`},deleteModal:{title:`사용자 삭제`,message:`이 사용자를 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.`,confirm:`사용자 삭제`}},streamOverlay:{title:`스트림 오버레이`,invalidPrinterId:`유효하지 않은 프린터 ID`,cameraStream:`카메라 스트림`,progress:`진행률`,eta:`예상 완료`,printerIdle:`프린터 대기 중`,printerOffline:`프린터 오프라인`,builder:{title:`스트림 오버레이`,description:`스트림 오버레이 URL을 만듭니다. 전체 화면 카메라 영상 위에 실시간 출력 정보를 겹쳐 보여주며 OBS, 벽걸이 디스플레이 등 모든 브라우저 소스에서 쓸 수 있습니다. 원하는 항목을 고르고 URL을 복사하세요.`,printer:`프린터`,size:`글자 크기`,sizeSmall:`작게`,sizeMedium:`보통`,sizeLarge:`크게`,fps:`프레임 속도`,fpsHint:`A1 및 P1 카메라는 요청한 값과 관계없이 초당 약 5프레임이 한계입니다.`,token:`스트림 오버레이 토큰(선택)`,tokenHint:`로그인을 사용할 때만 필요합니다. OBS에는 자체 세션이 없습니다. 위에서 스트림 오버레이 범위로 발급하세요.`,tokenWarning:`이 URL에는 토큰이 들어 있습니다. URL을 읽을 수 있는 사람은 누구나 영상과 파일 이름을 볼 수 있습니다. 접근을 끊으려면 토큰을 폐기하세요.`,fields:`표시할 항목`,fieldPrinter:`프린터 이름`,fieldFilename:`파일 이름`,fieldStatus:`상태`,fieldProgress:`진행률 막대`,fieldLayers:`레이어 수`,fieldEta:`남은 시간과 완료 예정 시각`,fieldCamera:`카메라 영상`,chamberHint:`챔버 온도는 실제 센서가 있는 모델에서만 표시됩니다. P1과 A1은 의미 없는 값을 보고하므로 제외됩니다.`,urlTitle:`오버레이 URL`,open:`열기`,showPreview:`미리보기 표시`,hidePreview:`미리보기 숨기기`,previewTitle:`오버레이 미리보기`},status:{printing:`인쇄 중`,paused:`일시 중지됨`,finished:`완료됨`,failed:`실패`,idle:`대기 중`,unknown:`알 수 없음`}},profiles:{title:`프로필`,subtitle:`슬라이서 프리셋 및 압력 전진 보정 관리`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`로컬 프로필`,kprofiles:`K-프로필`},orcaCloud:{connectedAs:`연결됨`,connectedShort:`Orca Cloud에 연결됨`,logout:`연결 해제`,noLogoutPermission:`연결을 해제할 권한이 없습니다`,noConnectPermission:`Orca Cloud에 연결할 권한이 없습니다`,retry:`다시 시도`,connectButton:`Orca Cloud 연결`,connect:{title:`Orca Cloud에 연결`,description:`Orca Cloud 계정에 로그인하여 슬라이서 프로필을 Bambuddy에 동기화하세요.`},device:{title:`Orca Cloud에서 Bambuddy 승인`,instruction:`Orca Cloud를 열고 이 코드를 승인하세요. 승인하면 Bambuddy가 자동으로 연결됩니다.`,codeLabel:`페어링 코드`,openButton:`Orca Cloud 승인 페이지 열기`,manualHint:`또는 {{url}}(으)로 이동하여 위 코드를 입력하세요.`,waiting:`승인을 기다리는 중…`,cancel:`취소`},profiles:{title:`Orca Cloud 프로필 ({{count}})`,refresh:`새로고침`,empty:`Orca Cloud 계정에 아직 프로필이 없습니다.`},toast:{disconnected:`Orca Cloud 연결 해제됨`},errors:{startFailed:`Orca Cloud 로그인 흐름을 시작할 수 없습니다.`,denied:`Orca Cloud에서 페어링이 거부되었습니다.`,expired:`페어링 코드가 만료되었습니다. 연결을 클릭하여 다시 시도하세요.`,pollFailed:`승인을 기다리는 중 연결이 끊겼습니다. 다시 시도하세요.`}},localProfiles:{title:`로컬 프로필`,subtitle:`OrcaSlicer에서 슬라이서 프리셋 가져오기 및 관리`,import:`프로필 가져오기`,importDesc:`.bbscfg, .bbsflmt, .orca_filament, .zip 또는 .json 파일을 여기에 드롭하세요`,importing:`가져오는 중...`,search:`로컬 프리셋 검색...`,noPresets:`로컬 프리셋 없음`,badge:`로컬`,edit:`편집`,delete:`삭제`,cancel:`취소`,deleteConfirmTitle:`프리셋 삭제`,deleteConfirm:`이 프리셋을 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.`,source:`출처`,inheritsFrom:`상속`,filamentType:`유형`,vendor:`제조사`,compatiblePrinters:`프린터`,nozzleTemp:`노즐 온도`,cost:`비용`,density:`밀도`,pressureAdvance:`압력 전진`,filament:`필라멘트`,process:`프로세스`,printer:`프린터`,toast:{importSuccess:`{{count}}개 프리셋 가져옴`,importSkipped:`{{count}}개 프리셋 건너뜀 (중복)`,importError:`가져오기 중 {{count}}개 오류 발생`,deleted:`프리셋 삭제됨`,updated:`프리셋 업데이트됨`},noSearchResults:`검색어와 일치하는 프리셋이 없습니다`},connectedAs:`연결된 계정`,signInExpiredTitle:`Bambu 클라우드 로그인이 만료되었습니다`,signInExpiredBody:`Bambu Lab이 저장된 토큰을 더 이상 허용하지 않습니다. 클라우드 프로필, MakerWorld 가져오기, 펌웨어 확인을 복구하려면 다시 로그인하세요.`,logout:`로그아웃`,noLogoutPermission:`로그아웃 권한이 없습니다`,failedToLoad:`프로필 불러오기 실패`,retry:`다시 시도`,time:{justNow:`방금`,minsAgo:`{{count}}분 전`,hoursAgo:`{{count}}시간 전`,daysAgo:`{{count}}일 전`},toast:{loggedOut:`로그아웃되었습니다`},login:{title:`Bambu 클라우드 연결`,subtitle:`기기 간 슬라이서 프리셋 동기화`,email:`이메일`,password:`비밀번호`,region:`지역`,regionGlobal:`글로벌`,regionChina:`중국`,verificationCode:`인증 코드`,totpCode:`인증앱 코드`,checkEmail:`이메일({{email}})로 전송된 6자리 코드를 확인하세요`,enterTotpHint:`인증앱에서 6자리 코드를 입력하세요`,accessToken:`액세스 토큰`,accessTokenHint:`Bambu Studio에서 Bambu Lab 액세스 토큰을 붙여넣으세요`,back:`뒤로`,loginButton:`로그인`,verifyButton:`인증`,setTokenButton:`토큰 설정`,useToken:`액세스 토큰 대신 사용`,captchaTitle:`Bambu Cloud가 CAPTCHA를 요구합니다`,captchaBody:`Bambu가 로그인을 처리하기 전에 네트워크에 CAPTCHA 확인을 요구하고 있으며, 이 확인은 Bambuddy에서 응답할 수 없습니다. 이메일과 비밀번호의 문제가 아닙니다. 차단은 공용 IP 주소에 연결되어 있으며 보통 몇 시간 안에 저절로 풀립니다. 반복해서 재시도하면 오히려 더 오래 지속됩니다. 지금 로그인하려면 브라우저 세션에서 가져온 액세스 토큰을 사용하세요.`,useEmail:`이메일로 로그인`,toast:{loggedIn:`성공적으로 로그인되었습니다`,codeSent:`이메일로 인증 코드가 전송되었습니다`,enterTotp:`인증앱에서 코드를 입력하세요`,tokenSet:`토큰이 성공적으로 설정되었습니다`}},presets:{myPreset:`내 프리셋 (편집 가능)`,duplicate:`복제`,editable:`편집 가능`,failedToLoadDetails:`프리셋 세부 정보 불러오기 실패`,deleteConfirm:`이 프리셋을 삭제하시겠습니까?`,deleteWarning:`Bambu 클라우드에서 "{{name}}"을(를) 영구적으로 삭제합니다. 이 작업은 취소할 수 없습니다.`,noDuplicatePermission:`프리셋 복제 권한이 없습니다`,noEditPermission:`프리셋 편집 권한이 없습니다`,noDeletePermission:`프리셋 삭제 권한이 없습니다`,types:{filament:`필라멘트 프리셋`,printer:`프린터 프리셋`,process:`프로세스 프리셋`},toast:{deleted:`프리셋 삭제됨`,created:`프리셋 생성됨`,updated:`프리셋 업데이트됨`,duplicated:`프리셋 복제됨`,fieldAdded:`"{{key}}" 필드 추가됨`,exported:`프리셋 내보냄`},baseLabel:`기본: {{name}}`,currentLabel:`현재: {{name}}`,newPreset:`새 프리셋`,editPreset:`프리셋 편집`,duplicatePreset:`프리셋 복제`,createNewPreset:`새 프리셋 생성`,customizeSettings:`새 프리셋의 설정 사용자 지정`,compareWithBase:`기본 프리셋과 비교`,compare:`비교`,basePreset:`기본 프리셋`,selectBasePreset:`기본 프리셋 선택...`,presetName:`프리셋 이름`,myCustomPreset:`내 사용자 지정 프리셋`,inheritsFrom:`상속 출처`,dropJsonToImport:`JSON 파일을 드롭하여 가져오기`,tabs:{common:`공통`,allFields:`모든 필드`},availableFields:`사용 가능한 필드`,searchFieldsPlaceholder:`필드 검색...`,noMatchingFields:`일치하는 필드 없음`,allFieldsAdded:`모든 필드 추가됨`,addCustomField:`사용자 지정 필드 추가`,yourOverrides:`내 재정의`,noOverridesYet:`아직 재정의 없음`,clickFieldsToAdd:`왼쪽 필드를 클릭하여 추가`,saveAsTemplate:`템플릿으로 저장`,jsonTip:`팁: 이 모달 어디서나 .json 파일을 드래그 앤 드롭하여 설정을 가져올 수 있습니다`},cloudView:{searchPlaceholder:`프리셋 검색...`,templates:`템플릿`,refresh:`새로고침`,newPreset:`새 프리셋`,clearFilters:`필터 초기화`,compareMode:`비교 모드`,selectAnotherPreset:`다른 {{type}} 프리셋 선택`,clickTwoPresets:`같은 유형의 프리셋 두 개를 클릭하여 비교`,selectFirst:`1. 첫 번째 선택`,selectSecond:`2. 두 번째 선택`,compareNow:`지금 비교`,lastSynced:`마지막 동기화:`,showingCount:`{{total}}개 중 {{showing}}개 표시`,noPresetsFound:`프리셋을 찾을 수 없음`,columns:{filament:`필라멘트`,process:`프로세스`,printer:`프린터`},noFilamentPresets:`필라멘트 프리셋 없음`,noProcessPresets:`프로세스 프리셋 없음`,noPrinterPresets:`프린터 프리셋 없음`,filters:{type:`유형`,owner:`소유자`,printer:`프린터`,nozzle:`노즐`,filament:`필라멘트`,layer:`레이어`,all:`전체`,myPresets:`내 프리셋`,builtIn:`기본 제공`,process:`프로세스`},noTemplatesPermission:`템플릿 관리 권한이 없습니다`,noRefreshPermission:`프로필 새로고침 권한이 없습니다`,noCreatePermission:`프리셋 생성 권한이 없습니다`},templates:{title:`빠른 템플릿`,noTemplates:`아직 템플릿 없음`,createFirst:`프리셋 편집기에서 템플릿을 생성하세요`,typeFilter:`유형:`,deleteTitle:`템플릿 삭제`,deleteWarning:`이 작업은 취소할 수 없습니다`,deleteConfirm:`"{{name}}"을(를) 삭제하시겠습니까?`,namePlaceholder:`템플릿 이름`,descriptionPlaceholder:`설명`,settingsJson:`설정 (JSON)`,fieldsCount:`{{count}}개 필드`,shownInModals:`모달에 표시됨`,hiddenInModals:`모달에서 숨겨짐`,apply:`적용`,toast:{deleted:`템플릿 삭제됨`,updated:`템플릿 업데이트됨`,created:`템플릿 생성됨`,applied:`템플릿 적용됨`}}},support:{debugLoggingActive:`디버그 로깅이 활성화되어 있습니다`,manageLogs:`관리`,collectItem7:`프린터 연결 및 펌웨어 버전`,collectItem8:`통합 상태 (Spoolman, MQTT, HA)`,collectItem9:`네트워크 인터페이스 (서브넷만)`,collectItem10:`Python 패키지 버전`,collectItem11:`데이터베이스 상태 확인`,collectItem12:`Docker 환경 세부 정보`,bundleGenerating:`번들 생성 중...`,bundleStepConnection:`프린터 연결 확인 실행 중`,bundleStepVirtualPrinters:`가상 프린터 설정 확인 실행 중`,bundleStepLogScan:`알려진 문제가 있는지 최근 로그 스캔 중`,bundleStepBuild:`지원 번들 ZIP 빌드 중`},fileManager:{variants:{badge:`버전 {{count}}개`,groupAction:`버전으로 그룹화`,groupTooltip:`이 파일들을 서로 다른 프린터용으로 슬라이스한 동일 작업으로 표시합니다`,grouped:`파일 {{count}}개를 버전으로 그룹화했습니다`,printAlternatives:`인쇄 (대안 {{count}}개)`},title:`파일 관리자`,subtitle:`인쇄 파일 정리 및 관리`,uploadFiles:`파일 업로드`,newFolder:`새 폴더`,folderName:`폴더 이름`,folderNamePlaceholder:`예: 기능성 부품`,renameFile:`파일 이름 바꾸기`,renameFolder:`폴더 이름 바꾸기`,invalidFilenameChar:`"{{char}}" 문자는 인쇄 파일 이름에 허용되지 않습니다. 프린터 SD 카드가 거부하는 문자: < > : " / \\ | ? *`,moveFiles:`{{count}}개 파일 이동`,rootNoFolder:`루트 (폴더 없음)`,current:`현재`,linkFolder:`폴더 연결`,linkFolderDescription:`"{{name}}"을(를) 프로젝트 또는 아카이브에 연결하여 빠른 접근.`,project:`프로젝트`,archive:`아카이브`,noProjectsFound:`프로젝트를 찾을 수 없음`,noArchivesFound:`아카이브를 찾을 수 없음`,unlink:`연결 해제`,link:`연결`,dragDropFiles:`파일을 여기에 드래그 앤 드롭`,dropFilesHere:`파일을 여기에 드롭`,releaseToUpload:`놓아서 업로드`,orClickToBrowse:`또는 클릭하여 탐색`,allFileTypesSupported:`모든 파일 형식 지원. ZIP 파일은 압축 해제됩니다.`,zipFilesDetected:`ZIP 파일 감지됨`,zipExtractOptions:`ZIP 파일이 압축 해제됩니다. 폴더 구조 처리 방법을 선택하세요:`,preserveZipStructure:`ZIP에서 폴더 구조 유지`,createFolderFromZip:`ZIP 파일 이름으로 폴더 생성`,stlThumbnailGeneration:`STL 썸네일 생성`,zipMayContainStl:`ZIP 파일에 STL 파일이 포함될 수 있습니다. 압축 해제 중 썸네일을 생성할 수 있습니다.`,thumbnailsCanBeGenerated:`STL 파일의 썸네일을 생성할 수 있습니다. 대형 모델은 처리 시간이 더 걸릴 수 있습니다.`,generateThumbnailsForStl:`STL 파일의 썸네일 생성`,threemfDetected:`3MF 파일 감지됨`,threemfExtractionInfo:`프린터 모델, 재료, 색상 및 인쇄 설정이 3MF 파일에서 자동으로 추출됩니다.`,willBeExtracted:`추출 예정`,filesExtracted:`{{count}}개 파일 추출됨`,uploadComplete:`업로드 완료: {{succeeded}}개 성공`,uploadFailed:`업로드 실패`,zipFilesFailed:`{{count}}개 파일 실패`,uploading:`업로드 중...`,changeLink:`링크 변경...`,linkTo:`연결 대상...`,linkToProjectOrArchive:`프로젝트 또는 아카이브에 연결`,generateThumbnail:`썸네일 생성`,generateThumbnails:`썸네일 생성`,generateThumbnailsForMissing:`썸네일이 없는 STL 파일의 썸네일 생성`,gridView:`격자 보기`,listView:`목록 보기`,lowDiskSpaceWarning:`디스크 공간 부족 경고`,lowDiskSpaceDetails:`전체 {{total}} 중 {{free}}만 남음. 임계값은 설정에서 {{threshold}}GB로 설정됩니다.`,files:`파일`,folders:`폴더`,size:`크기`,free:`여유`,allFiles:`모든 파일`,allExternal:`외부`,externalIsEmpty:`외부 파일 없음`,externalEmptyDescription:`연결된 외부 폴더의 파일이 여기에 표시됩니다.`,wrap:`줄 바꿈`,enableTextWrapping:`텍스트 줄 바꿈 활성화`,disableTextWrapping:`텍스트 줄 바꿈 비활성화`,collapse:`접기`,collapseFoldersByDefault:`기본적으로 폴더 접기`,expandFoldersByDefault:`기본적으로 폴더 펼치기`,folderSort:`폴더 정렬`,folderSortByName:`이름순`,folderSortByActivity:`최근 활동순`,dragToResizeTooltip:`드래그하여 크기 조정, 더블클릭하여 초기화`,searchFiles:`파일 검색...`,searchSubfoldersHint:`하위 폴더 포함`,readme:{truncated:`잘림`,show:`README 표시`,hide:`README 숨기기`,label:`README`},tags:{title:`태그`,subtitle:`파일에 가로지르는 필터용 라벨을 붙이세요 — 장난감, 어린이용, PETG 전용 등.`,manage:`태그`,manageTitle:`태그 카탈로그 관리`,add:`새 태그`,edit:`태그 이름 변경`,name:`이름`,fileCount:`파일`,empty:`아직 태그가 없습니다. 만들어서 파일에 라벨을 붙이세요.`,noMatches:`일치하는 태그가 없습니다.`,createPlaceholder:`예: 장난감, 어린이용, petg`,createButton:`만들기`,nameRequired:`이름은 필수입니다.`,searchPlaceholder:`태그 필터...`,created:`태그가 만들어졌습니다.`,updated:`태그 이름이 변경되었습니다.`,deleted:`태그가 제거되었습니다.`,saveFailed:`태그를 저장할 수 없습니다.`,deleteFailed:`태그를 제거할 수 없습니다.`,applyFailed:`태그를 적용할 수 없습니다.`,applyAdd:`태그 추가`,applyRemove:`태그 제거`,applyAddSuccess:`{{files}}개 파일에 태그 {{count}}개를 추가했습니다.`,applyRemoveSuccess:`{{files}}개 파일에서 태그 {{count}}개를 제거했습니다.`,actionAdd:`선택한 파일에 추가`,actionRemove:`선택한 파일에서 제거`,tagAction:`태그`,bulkTitle:`선택한 {{count}}개 파일에 태그 지정`,bulkTooltip:`선택한 모든 파일에 태그를 추가하거나 제거합니다.`,noPermission:`파일에 태그를 붙일 권한이 없습니다.`,filterLabel:`필터:`,clearAll:`모두 지우기`,confirmDelete:`태그 "{{name}}"을(를) 삭제하시겠습니까?`,confirmDeleteMessage:`카탈로그에서 태그를 제거합니다. 파일과 다른 태그는 그대로 유지됩니다.`,confirmDeleteInUseMessage:`이 태그는 {{count}}개 파일에 있습니다. 삭제하면 모든 파일에서 칩이 사라지지만 파일 자체는 변경되지 않습니다.`,editAria:`{{name}} 편집`,deleteAria:`{{name}} 삭제`},allTypes:`모든 유형`,prints:`인쇄물`,ascending:`오름차순`,descending:`내림차순`,showModified:`수정 날짜 표시`,hideModified:`수정 날짜 숨기기`,lastModified:`마지막 수정`,lastActivity:`마지막 활동`,resultsCount:`전체 {{total}}개 중 {{showing}}개`,selectAll:`모두 선택`,deselectAll:`모두 선택 해제`,selected:`{{count}}개 선택됨`,adding:`추가 중...`,loadingFiles:`파일 불러오는 중...`,folderIsEmpty:`폴더가 비어 있음`,noFilesYet:`파일 없음`,folderEmptyDescription:`파일을 업로드하거나 이 폴더로 이동하여 시작하세요.`,noFilesDescription:`파일을 업로드하여 인쇄 관련 파일을 정리하세요.`,noMatchingFiles:`일치하는 파일 없음`,noMatchingFilesDescription:`현재 검색 또는 필터 조건과 일치하는 파일이 없습니다.`,clearFilters:`필터 초기화`,printedCount:`{{count}}회 인쇄됨`,uploadedBy:`업로드한 사람`,deleteFolder:`폴더 삭제`,deleteFile:`파일 삭제`,deleteFilesCount:`{{count}}개 파일 삭제`,deleteFolderConfirm:`이 폴더를 삭제하시겠습니까? 안의 모든 파일도 삭제됩니다.`,deleteFileConfirm:`이 파일을 삭제하시겠습니까?`,deleteFilesConfirm:`선택한 {{count}}개 파일을 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.`,deleting:`삭제 중...`,noPermissionRenameFolder:`폴더 이름 변경 권한이 없습니다`,noPermissionLinkFolder:`폴더 연결 권한이 없습니다`,noPermissionDeleteFolder:`폴더 삭제 권한이 없습니다`,onlyEmptyFoldersDeletable:`빈 폴더만 삭제할 수 있습니다`,noPermissionPrint:`인쇄 권한이 없습니다`,noPermissionAddToQueue:`대기열 추가 권한이 없습니다`,noPermissionSlice:`파일 슬라이싱 권한이 없습니다`,noPermissionDownload:`파일 다운로드 권한이 없습니다`,noPermissionPreview:`파일을 미리 볼 권한이 없습니다`,preview3d:`3D 미리보기`,noPermissionRenameFile:`파일 이름 변경 권한이 없습니다`,noPermissionGenerateThumbnail:`썸네일 생성 권한이 없습니다`,noPermissionDeleteFile:`파일 삭제 권한이 없습니다`,noPermissionCreateFolder:`폴더 생성 권한이 없습니다`,noPermissionUpload:`파일 업로드 권한이 없습니다`,noPermissionMoveFiles:`파일 이동 권한이 없습니다`,noPermissionDeleteFiles:`파일 삭제 권한이 없습니다`,linkExternal:`외부 연결`,linkExternalFolder:`외부 폴더 연결`,linkExternalFolderDescription:`호스트 디렉토리(NAS, USB, 네트워크 공유)를 파일 관리자에 마운트합니다. 파일은 복사되지 않고 원래 경로에서 직접 접근합니다.`,externalFolderNamePlaceholder:`예: NAS 인쇄물`,externalPath:`호스트 경로`,externalPathHelp:`Docker 호스트의 디렉토리 절대 경로. 컨테이너에 바인드 마운트되어야 합니다.`,readOnly:`읽기 전용`,readOnlyHelp:`업로드 및 삭제 방지`,showHiddenFiles:`숨김 파일 표시 (dotfiles)`,externalFolder:`외부 폴더`,scanFolder:`스캔`,toast:{folderCreated:`폴더 생성됨`,openInSlicerFailed:`슬라이서에서 열 수 없습니다`,folderDeleted:`폴더 삭제됨`,fileDeleted:`파일 삭제됨`,filesDeleted:`{{count}}개 파일 삭제됨`,filesMoved:`파일 이동됨`,folderLinked:`폴더 연결됨`,folderUnlinked:`폴더 연결 해제됨`,externalFolderLinked:`외부 폴더 연결 및 스캔됨`,folderScanned:`스캔 완료: {{added}}개 추가, {{removed}}개 제거`,addedToQueue:`{{count}}개 파일을 대기열에 추가함`,addedToQueuePartial:`{{added}}개 추가됨, {{failed}}개 실패`,failedToAddToQueue:`파일 추가 실패: {{error}}`,fileRenamed:`파일 이름 변경됨`,folderRenamed:`폴더 이름 변경됨`,thumbnailsGenerated:`{{count}}개 썸네일 생성됨`,thumbnailsGeneratedPartial:`{{succeeded}}개 썸네일 생성됨, {{failed}}개 실패`,noStlMissingThumbnails:`썸네일이 없는 STL 파일 없음`,failedToGenerateThumbnails:`썸네일 생성 실패: {{error}}`,thumbnailGenerated:`썸네일 생성됨`,failedToGenerateThumbnail:`썸네일 생성 실패: {{error}}`}},projects:{parentLabel:`상위 프로젝트`,parentNone:`없음 (최상위 프로젝트)`,parentHint:`이 프로젝트를 다른 프로젝트 아래에 두면 수치가 마스터 프로젝트로 합산됩니다`,partOf:`{{name}}의 일부`,subProjectCount:`하위 프로젝트 {{count}}개`,subProjectsOf:`{{name}}의 하위 프로젝트`,collapseSubProjects:`하위 프로젝트 접기`,expandSubProjects:`하위 프로젝트 펼치기`,title:`프로젝트`,subtitle:`3D 인쇄 프로젝트 정리 및 추적`,newProject:`새 프로젝트`,editProject:`프로젝트 편집`,deleteProject:`프로젝트 삭제`,projectName:`프로젝트 이름`,description:`설명`,noProjects:`프로젝트 없음`,noProjectsFiltered:`{{status}} 프로젝트 없음`,noProjectsFilteredHelp:`{{status}} 프로젝트가 없습니다. 상태가 변경되면 여기에 표시됩니다.`,createFirst:`첫 번째 프로젝트를 만들어 관련 인쇄물을 정리하고 진행 상황을 추적하며 빌드를 관리하세요.`,createFirstButton:`첫 번째 프로젝트 만들기`,create:`만들기`,files:`파일`,prints:`인쇄물`,plates:`플레이트`,parts:`부품`,lastModified:`마지막 수정`,deleteConfirm:`이 프로젝트를 삭제하시겠습니까? 아카이브 및 대기열 항목은 연결 해제되지만 삭제되지는 않습니다.`,addFiles:`파일 추가`,removeFile:`파일 제거`,viewDetails:`세부 정보 보기`,namePlaceholder:`예: Voron 2.4 빌드`,descriptionPlaceholder:`선택적 설명...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URL은 http:// 또는 https://로 시작해야 합니다`,openExternalUrl:`프로젝트 URL 열기`,coverImageLabel:`커버 사진`,coverImageAlt:`프로젝트 커버 사진`,coverImageUpload:`업로드`,coverImageReplace:`교체`,coverImageRemove:`제거`,color:`색상`,targetPlates:`목표 플레이트`,targetPlatesPlaceholder:`예: 25`,targetPlatesHelp:`인쇄 작업 수`,targetParts:`목표 부품`,targetPartsPlaceholder:`예: 150`,targetPartsHelp:`필요한 총 개체 수`,targetSets:`파일당 복사본 수`,targetSetsPlaceholder:`예: 10`,targetSetsHelp:`각 인쇄 가능한 파일을 인쇄할 횟수`,tagsLabel:`태그 (쉼표로 구분)`,tagsPlaceholder:`예: voron, 기능성, 선물`,dueDate:`마감일`,priority:`우선순위`,priorityLow:`낮음`,priorityNormal:`보통`,priorityHigh:`높음`,priorityUrgent:`긴급`,statusActive:`활성`,statusCompleted:`완료됨`,statusArchived:`보관됨`,done:`완료`,completed:`완료됨`,failed:`실패`,inQueue:`대기 중`,noPrintsYet:`인쇄물 없음`,printJobs:`인쇄 작업 (플레이트)`,partsPrinted:`인쇄된 부품`,failedParts:`실패한 부품`,import:`가져오기`,export:`내보내기`,importProject:`프로젝트 가져오기`,exportAll:`모든 프로젝트 내보내기`,loading:`프로젝트 불러오는 중...`,noEditPermission:`프로젝트 편집 권한이 없습니다`,noDeletePermission:`프로젝트 삭제 권한이 없습니다`,noCreatePermission:`프로젝트 생성 권한이 없습니다`,noImportPermission:`프로젝트 가져오기 권한이 없습니다`,noExportPermission:`프로젝트 내보내기 권한이 없습니다`,toast:{created:`프로젝트 생성됨`,updated:`프로젝트 업데이트됨`,deleted:`프로젝트 삭제됨`,imported:`프로젝트 가져옴`,multipleImported:`{{count}}개 프로젝트 가져옴`,importFailed:`가져오기 실패`,exported:`프로젝트 내보냄 (메타데이터만)`}},projectDetail:{notFound:`프로젝트를 찾을 수 없음`,backToProjects:`프로젝트로 돌아가기`,export:`내보내기`,exportProject:`프로젝트 내보내기`,noExportPermission:`프로젝트 내보내기 권한이 없습니다`,noEditPermission:`프로젝트 편집 권한이 없습니다`,partOf:`속한 프로젝트:`,priorityLabel:`우선순위:`,noPrints:`이 프로젝트에 아직 인쇄물이 없습니다`,status:{active:`활성`,completed:`완료됨`,archived:`보관됨`},priority:{low:`낮음`,normal:`보통`,high:`높음`,urgent:`긴급`},dueDate:{overdue:`기한 초과`,today:`오늘 마감`,daysLeft:`{{count}}일 남음`},progress:{platesProgress:`플레이트 진행률`,partsProgress:`부품 진행률`,setsProgress:`완성된 세트`,sets:`세트`,setsHint:`모든 인쇄 가능한 파일이 이 횟수에 도달하면 세트가 완성됩니다`,printJobs:`인쇄 작업`,parts:`부품`,percentComplete:`{{percent}}% 완료`,remaining:`{{count}}개 남음`},stats:{printJobs:`인쇄 작업`,total:`합계`,failed:`{{count}}개 실패`,partsPrinted:`{{count}}개 부품 인쇄됨`,printTime:`인쇄 시간`,filamentUsed:`사용된 필라멘트`},cost:{title:`비용 추적`,filamentCost:`필라멘트 비용`,energy:`에너지`,totalCost:`총 비용`,total:`합계`,includesBom:`BOM 포함`,budget:`예산`,remaining:`남은 예산`},subProjects:{title:`하위 프로젝트 ({{count}})`,jobs:`작업 {{count}}개`},rollup:{title:`하위 프로젝트 {{count}}개 포함`,progress:`전체 진행률`,percentComplete:`{{percent}}% 완료`},notes:{title:`메모`,noEditPermission:`메모 편집 권한이 없습니다`,placeholder:`이 프로젝트에 대한 메모 추가...`,empty:`아직 메모가 없습니다. 편집을 클릭하여 메모를 추가하세요.`},files:{title:`파일`,linkFolders:`파일 관리자에서 폴더 연결`,forQuickAccess:`빠른 접근을 위해 이 프로젝트에 연결합니다.`,fileCount:`{{count}}개 파일`,empty:`연결된 폴더가 없습니다. 파일 관리자로 이동하여 폴더를 이 프로젝트에 연결하세요.`,printedCount:`{{count}}회 인쇄됨`,progressTooltip:`{{target}}회 중 {{done}}회 인쇄 완료`,noFiles:`이 폴더에 파일이 없습니다.`},bom:{title:`부품 목록`,acquired:`{{total}}개 중 {{completed}}개 확보`,showAll:`전체 표시`,hideDone:`완료된 것 숨기기`,addPart:`부품 추가`,noAddPermission:`부품 추가 권한이 없습니다`,partNamePlaceholder:`부품 이름 (예: M3x8 나사)`,partName:`부품 이름`,qty:`수량`,price:`가격 ({{currency}})`,sourcingUrlPlaceholder:`구매 URL (선택사항)`,remarksPlaceholder:`비고 (선택사항)`,deletePart:`부품 삭제`,deleteConfirm:`"{{name}}"을(를) 삭제하시겠습니까?`,noUpdatePermission:`부품 업데이트 권한이 없습니다`,noEditPermission:`부품 편집 권한이 없습니다`,noDeletePermission:`부품 삭제 권한이 없습니다`,totalCost:`총 비용:`,empty:`부품 목록에 부품이 없습니다. 하드웨어, 전자 부품 또는 기타 구성품을 추가하여 조달이 필요한 것을 추적하세요.`},timeline:{title:`활동 타임라인`,empty:`아직 활동이 없습니다.`},template:{saveAsTemplate:`템플릿으로 저장`,noCreatePermission:`템플릿 생성 권한이 없습니다`},queue:{title:`대기열`,viewAll:`전체 보기`,printing:`{{count}}개 인쇄 중`,queued:`{{count}}개 대기 중`},prints:{title:`인쇄물 ({{count}})`},toast:{projectUpdated:`프로젝트 업데이트됨`,partAdded:`부품 추가됨`,partRemoved:`부품 제거됨`,exportFailed:`내보내기 실패`,projectExported:`프로젝트 내보냄`,templateCreated:`템플릿 생성됨`}},system:{title:`시스템 정보`,version:`버전`,uptime:`가동 시간`,cpuUsage:`CPU 사용량`,memoryUsage:`메모리 사용량`,diskUsage:`디스크 사용량`,networkInfo:`네트워크 정보`,logs:`로그`,debugMode:`디버그 모드`,enableDebug:`디버그 로깅 활성화`,disableDebug:`디버그 로깅 비활성화`,downloadLogs:`로그 다운로드`,clearLogs:`로그 초기화`,dockerInfo:`Docker 정보`,containerName:`컨테이너 이름`,imageName:`이미지 이름`,platform:`플랫폼`,architecture:`아키텍처`},sponsors:{sectionTitle:`독립적·커뮤니티 후원`,tagline:`Bambuddy는 무료이며, 자발적으로 후원하는 사용자 덕분에 계속 무료로 유지됩니다. VC도 없고, 클라우드 종속도 없습니다.`,viewSupporters:`후원자 보기`,toastPrints:`Bambuddy로 {{count}}회 인쇄를 완료했습니다. Bambuddy는 후원자 덕분에 무료로 유지됩니다.`,toastCost:`Bambuddy로 {{total}}만큼의 필라멘트를 추적했습니다. 프로젝트를 독립적으로 유지하는 사람들을 만나보세요.`,toastArchives:`Bambuddy로 {{count}}회 인쇄를 아카이브했습니다. 독립성을 지지하는 사람들을 만나보세요.`,toastAnniversary:`Bambuddy와 함께한 지 1년입니다! 프로젝트를 독립적으로 유지하는 사람들을 만나보세요.`,toastVersionUpdate:`v{{version}}로 업데이트되었습니다. Bambuddy는 후원자 덕분에 무료로 유지됩니다.`,toastBusiness:`프린터 {{count}}대에서 Bambuddy를 운영 중이신가요? 팀을 위한 지원 플랜이 있습니다. 우선 수정, 인보이스 발행, 메인테이너와의 직접 소통을 제공합니다.`,businessCta:`비즈니스용 Bambuddy`,businessTitle:`비즈니스용 Bambuddy`,businessTagline:`프린터 {{count}}대를 운영 중입니다. 팀과 프린트 팜을 위한 우선 지원, 상용 라이선스, 인보이스 발행을 제공합니다.`},library:{title:`필라멘트 라이브러리`,addFilament:`필라멘트 추가`,editFilament:`필라멘트 편집`,deleteFilament:`필라멘트 삭제`,vendor:`제조사`,material:`재료`,color:`색상`,kFactor:`K 계수`,temperature:`온도`,noFilaments:`라이브러리에 필라멘트 없음`,deleteConfirm:`이 필라멘트를 삭제하시겠습니까?`,importFromPrinter:`프린터에서 가져오기`,exportToFile:`파일로 내보내기`,runWithPipeline:{actionLabel:`파이프라인으로 실행`,noPermission:`파이프라인을 실행할 권한이 없습니다`,modalTitle:`파이프라인으로 실행`,confirmTitle:`실행 확인`,confirmIntro:`사전 점검에서 이 실행과 관련된 문제를 발견했습니다`,sourceHint:`소스`,pipelineHint:`파이프라인`,targetHint:`대상`,pipelineListAria:`사용 가능한 파이프라인`,runAnyway:`그래도 실행`,loading:`불러오는 중…`,empty:`저장된 파이프라인이 없습니다. 슬라이스 대화상자를 열고 "파이프라인으로 저장"을 클릭하여 생성하세요.`,noTarget:`대상 프린터가 설정되지 않음`,noTargetMessage:`이 파이프라인에는 대상 프린터가 없습니다. 설정에서 열어 선택하세요.`,copies:`사본 수`,copiesHint:`최대 {{n}}`,classTarget:`임의의 {{model}}`,toast:{started:`파이프라인 실행 시작됨`,failed:`실행을 시작할 수 없습니다`},issue:{printerNotSet:`이 파이프라인에 대상 프린터가 설정되어 있지 않습니다.`,printerNotFound:`대상 프린터가 더 이상 존재하지 않습니다.`,printerDisabled:`대상 프린터가 비활성화되어 있습니다.`,printerOffline:`대상 프린터가 오프라인입니다.`,filamentType:`필라멘트 슬롯 {{slot}}: 예상 {{expected}}, AMS 실제 {{actual}}`,filamentColor:`필라멘트 슬롯 {{slot}}: 색상이 다릅니다 (예상 {{expected}}, AMS {{actual}})`,amsSlotMissing:`AMS 슬롯 {{slot}}이(가) 이 프린터에서 사용 불가`,filamentUnverified:`필라멘트 슬롯 {{slot}}은(는) 클라우드/표준 프리셋이며 정적으로 검증할 수 없습니다.`,noClassMatches:`이 설치에서 파이프라인의 대상 모델 클래스({{expected}})와 일치하는 프린터가 없습니다.`,classNotSet:`파이프라인 대상이 프린터 클래스로 설정되었지만 모델이 선택되지 않았습니다.`}}},slicerSettings:{presetValuesOutdatedSidecar:`슬라이서 기본값을 표시합니다. 슬라이서 사이드카가 이 기능보다 오래되어 프리셋 값을 가져올 수 없습니다. 값을 보려면 사이드카 이미지를 업데이트하세요. 변경하지 않은 항목은 계속 프리셋 값을 사용합니다.`,presetValuesNotConfigured:`슬라이서 기본값을 표시합니다. 슬라이서 사이드카가 설정되지 않아 프리셋 값을 읽을 수 없습니다. 변경하지 않은 항목은 계속 프리셋 값을 사용합니다.`,presetValuesSidecarUnavailable:`슬라이서 기본값을 표시합니다. 슬라이서 사이드카가 응답하지 않아 프리셋 값을 읽을 수 없습니다. 변경하지 않은 항목은 계속 프리셋 값을 사용합니다.`,presetValuesUnavailable:`슬라이서 기본값을 표시합니다. 선택한 프리셋의 값을 읽을 수 없었습니다. 변경하지 않은 항목은 계속 프리셋 값을 사용합니다.`,filamentDefault:`기본값`,fromFile:`파일에서`,fromFileHint:`디자이너가 원본 파일에서 이 항목을 변경했습니다. 값은 {{value}}입니다.`,fromFilePrinterCoupled:`디자이너의 프린터`,fromFilePrinterCoupledHint:`이 파일이 설계된 프린터에 맞춘 값입니다. 사용 중인 프린터에서는 잘못되거나 범위를 벗어날 수 있습니다.`,fromFileOverridesPreset:`프리셋 덮어쓰기`,fromFileOverridesPresetHint:`파일은 이 값을 {{value}}(으)로 설정하지만 선택한 프리셋은 {{preset}}을(를) 사용합니다. 파일을 우선할 때만 선택하세요.`,useFromFile:`{{option}}에 원본 파일의 값 사용`,otherFromFile:`이 파일의 기타 설정`,fromFileSummary:`이 파일에서 디자이너가 프로세스 설정 {{count}}개를 변경했습니다. 체크한 항목만 적용됩니다.`,fromFileUseAll:`디자이너 설정 사용`,fromFileUseAllHint:`다른 프린터에서도 통하는 설정에 체크합니다. 디자이너의 프린터에 맞춘 설정과 선택한 프리셋을 정의하는 설정은 꺼진 채로 둡니다.`,fromFileClear:`{{count}}개 해제`,loading:`슬라이서 설정을 불러오는 중…`,mode:{simple:`간단`,advanced:`고급`,expert:`전문가`},searchPlaceholder:`설정 검색`,resetAll:`{{count}}개 초기화`,resetOption:`기본값으로 되돌리기`,noMatches:`검색과 일치하는 설정이 없습니다.`},slice:{filamentSlotUnset:`미설정`,processSettingsEmbedded:`'파일에 포함된 설정 사용'이 켜져 있는 동안에는 사용되지 않습니다. 이 슬라이스는 파일 자체의 설정을 따릅니다.`,processSettingsInactive:`비활성`,presetsHidden:`{{count}}개 숨김`,showAllPresets:`모두 표시`,showFewerPresets:`간략히 표시`,processSettings:`프로세스 설정`,processSettingsHint:`이 슬라이스에 사용할 프리셋을 조정합니다. 건드리지 않은 항목은 프리셋 정의를 그대로 따릅니다.`,processSettingsChanged:`{{count}}개 변경됨`,processSettingsUnchanged:`프리셋 기본값`,title:`모델 슬라이싱`,action:`슬라이싱`,slicing:`슬라이싱 중…`,printer:`프린터 프로필`,process:`프로세스 프로필`,filament:`필라멘트 프로필`,filamentSlot:`필라멘트 {{index}} ({{type}})`,filamentColour:`필라멘트 색상`,selectPreset:`— 프리셋 선택 —`,loadingPresets:`프리셋 불러오는 중…`,analyzingPlateFilaments:`플레이트 필라멘트 분석 중…`,analyzingPlateFilamentsHint:`이 플레이트가 사용하는 AMS 슬롯을 확인하기 위해 미리보기 슬라이싱을 실행합니다. 캐시 후에는 재오픈이 즉각적입니다.`,previewToast:`{{name}} 분석 중 — {{elapsed}}`,previewWithProgress:`{{name}} 분석 중 — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— 이 플레이트에서 사용되지 않음`,noPresetsForSlot:`사용 가능한 프리셋 없음`,presetsLoadFailed:`프리셋 불러오기 실패. 먼저 설정 → 프로필에서 가져오세요.`,refreshPresets:`새로 고침`,refreshPresetsTitle:`프리셋 새로 고침 — 최신 클라우드 및 번들 목록 가져오기 (Bambu Studio 또는 Bambu Handy에서 프리셋 삭제 후 사용)`,allPresetsRequired:`모든 프리셋을 선택해야 합니다`,useEmbedded:`파일에 포함된 설정 사용`,useEmbeddedHint:`위 프로필 대신 디자이너가 설정한 대로(벽, 내부 채움, 필라멘트) 슬라이싱합니다. 프린터가 파일과 일치하여 사용할 수 있습니다.`,autoOrient:`개체 방향 자동 조정`,autoOrientHint:`슬라이싱하기 전에 각 개체를 출력하기 좋은 면으로 회전시킵니다. 파일에 저장된 방향을 덮어씁니다.`,autoArrange:`플레이트에 자동 배치`,autoArrangeHint:`개체가 겹치지 않도록 슬라이서가 다시 배치합니다. 파일의 배치를 대체합니다.`,enqueuing:`슬라이싱 작업 제출 중…`,queued:`대기 중…`,failed:`슬라이싱 실패. 슬라이서 사이드카 로그를 확인하세요.`,startedToast:`백그라운드에서 {{name}} 슬라이싱 중…`,queuedToast:`대기 중: {{name}} — {{elapsed}}`,runningToast:`{{name}} 슬라이싱 중 — {{elapsed}}`,runningWithProgress:`{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,completedToast:`{{name}} 슬라이싱 완료`,externalWriteFallbackToast:`내부 라이브러리에 저장했습니다: 외부 폴더에 쓸 수 없습니다`,failedToast:`{{name}} 슬라이싱 실패: {{detail}}`,tier:{local:`가져온 것`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`표준`},cloud:{notAuthenticated:`클라우드 프리셋을 보려면 Bambu Cloud에 로그인하세요 (설정 → 프로필 → Bambu Cloud).`,expired:`Bambu Cloud 세션이 만료되었습니다 — 다시 로그인하여 클라우드 프리셋을 새로고침하세요.`,unreachable:`현재 Bambu Cloud에 연결할 수 없습니다. 로컬 및 표준 프리셋은 계속 작동합니다.`},orcaCloud:{notAuthenticated:`Orca 프리셋을 보려면 Orca Cloud (프로필 → Orca Cloud)에 로그인하세요.`,expired:`Orca Cloud 세션이 만료되었습니다 — Orca 프리셋을 새로고침하려면 다시 로그인하세요.`,unreachable:`Orca Cloud에 현재 연결할 수 없습니다. 다른 프리셋은 계속 작동합니다.`},actionAll:`{{count}}개 플레이트 모두 슬라이싱`,actionAllTitle:`모든 플레이트를 단일 다중 플레이트 출력으로 슬라이싱합니다 (단일 아카이브). 필라멘트 선택은 프로젝트가 정의하는 모든 슬롯을 포함합니다.`,allPlatesToggle:`{{count}}개 플레이트 모두 슬라이싱`,otherPrinters:`다른 프린터`,runningWithProgressMultiPlate:`플레이트 {{plateIndex}}/{{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,failedTitle:`슬라이싱 실패`,bedType:{label:`빌드 플레이트`,auto:`자동 (프로세스 프리셋 사용)`,coolPlate:`쿨 플레이트`,coolPlateSuperTack:`쿨 플레이트 슈퍼택`,engineering:`엔지니어링 플레이트`,highTemp:`고온 플레이트`,texturedPEI:`텍스처 PEI 플레이트`,smoothPEI:`매끄러운 PEI 플레이트`},pipelines:{label:`파이프라인`,applyAria:`파이프라인 적용`,applyPrompt:`파이프라인 적용…`,empty:`저장된 파이프라인이 없습니다`,saveButton:`파이프라인으로 저장`,saveTitle:`현재 네 개 슬롯의 선택을 재사용 가능한 파이프라인으로 저장합니다`,namePlaceholder:`파이프라인 이름`,nameAria:`새 파이프라인 이름`,toast:{applied:`"{{name}}" 적용됨`,saved:`파이프라인이 저장되었습니다`,saveFailed:`저장 실패`}}},spoolman:{title:`Spoolman 통합`,enabled:`Spoolman 활성화됨`,url:`Spoolman URL`,connected:`연결됨`,disconnected:`연결되지 않음`,testConnection:`연결 테스트`,sync:`동기화`,syncing:`동기화 중...`,lastSync:`마지막 동기화`,linkToSpoolman:`Spoolman에 연결`,openInSpoolman:`Spoolman에서 열기`,unlinkSpool:`스풀 연결 해제`,unlinkConfirmTitle:`스풀 할당 해제?`,unlinkConfirmMessage:`이 슬롯에서 스풀을 제거합니다. 스풀 데이터 자체는 변경되지 않습니다.`,selectSpool:`스풀 선택`,noUnlinkedSpools:`할당되지 않은 스풀 없음`,linkSuccess:`스풀이 성공적으로 할당되었습니다`,linkFailed:`스풀 할당 실패`,unlinkSuccess:`스풀이 성공적으로 할당 해제되었습니다`,unlinkFailed:`스풀 할당 해제 실패`,linkedSpool:`할당된 스풀`,spoolId:`스풀 ID`,fillSourceLabel:`(Spoolman)`,weight:`무게`,remaining:`남은 양`,disableWeightSync:`AMS 예상 무게 동기화 비활성화`,disableWeightSyncDesc:`AMS 추정치에서 남은 용량을 업데이트하지 않습니다. AMS 백분율 기반 추정 대신 Spoolman의 사용량 추적을 선호하는 경우 사용하세요. 새 스풀은 여전히 AMS 추정치를 초기 무게로 사용합니다.`,reportPartialUsage:`실패한 인쇄물에 대한 부분 사용량 보고`,reportPartialUsageDesc:`인쇄가 실패하거나 취소될 때 레이어 진행률을 기반으로 해당 시점까지 사용된 예상 필라멘트를 보고합니다.`},locations:{title:`보관 위치`,subtitle:`스풀의 선반, 서랍 등 물리적 보관 장소를 관리합니다`,add:`위치 추가`,addShort:`추가`,edit:`위치 편집`,name:`이름`,spools:`스풀`,sensors:`센서`,empty:`아직 보관 위치가 없습니다. 첫 번째 선반이나 서랍을 만드세요.`,manage:`위치`,createPlaceholder:`예: 선반 A, 서랍 1`,nameRequired:`위치 이름은 필수입니다`,created:`위치가 생성되었습니다`,updated:`위치가 업데이트되었습니다`,deleted:`위치가 삭제되었습니다`,saveFailed:`위치 저장에 실패했습니다`,deleteFailed:`위치 삭제에 실패했습니다`,deleteBlocked:`삭제하기 전에 이 위치의 모든 스풀을 옮기세요`,confirmDelete:`"{{name}}"을(를) 삭제하시겠습니까?`,confirmDeleteMessage:`이 위치가 카탈로그에서 제거됩니다. 스풀을 먼저 옮겨야 합니다.`,confirmDeleteMessageWithSensors:`이 위치가 카탈로그에서 제거됩니다. 스풀을 먼저 옮겨야 합니다. 연결된 센서도 함께 삭제됩니다.`},inventory:{title:`스풀 재고`,addToInventory:`인벤토리에 추가`,addToInventoryPending:`추가 중...`,addToInventorySuccess:`스풀이 인벤토리에 추가됨`,addToInventoryFailed:`스풀을 인벤토리에 추가하지 못함`,unknownSpoolTitle:`새 필라멘트 감지됨`,unknownSpoolMessage:`{{location}}에서 알 수 없는 RFID 태그가 있는 스풀이 감지되었습니다. 지금 인벤토리에 추가하시겠습니까?`,unknownSpoolSlot:`슬롯`,bulk:{selectAllVisible:`표시된 항목 모두 선택`,selectRow:`행 선택`,selectGroup:`그룹 선택`,selectionCount:`{{count}}개 선택됨`,edit:`편집`,printLabels:`라벨 인쇄`,resetUsage:`사용량 재설정`,restore:`복원`,archive:`보관`,delete:`삭제`,clearSelection:`선택 해제`,editTitle:`스풀 일괄 편집`,editSubtitle:`선택한 {{count}}개의 스풀에 적용됩니다. 체크한 필드만 업데이트됩니다.`,editHint:`필드에 입력하면 업데이트할 항목으로 표시됩니다 — 체크된 행만 전송됩니다. 빈 필드는 스풀을 변경하지 않습니다 (필드 비우기는 개별 스풀에서만 가능).`,useCustom:`"{{value}}" 사용`,toggleField:`이 필드의 업데이트 전환`,changeCount:`{{count}}개의 필드가 업데이트됩니다.`,applyPending:`적용 중...`,applyButton:`{{count}}개에 적용`,deleteTitle:`선택한 스풀 삭제`,archiveTitle:`선택한 스풀 보관`,restoreTitle:`선택한 스풀 복원`,resetUsageTitle:`선택한 스풀의 사용량 재설정`,deleteMessage:`{{count}}개의 스풀을 영구적으로 삭제하시겠습니까? 되돌릴 수 없습니다.`,archiveMessage:`{{count}}개의 스풀을 보관하시겠습니까? 나중에 복원할 수 있습니다.`,restoreMessage:`{{count}}개의 보관된 스풀을 복원하시겠습니까?`,resetUsageMessage:`{{count}}개의 스풀에서 "총 사용량" 카운터를 재설정하시겠습니까? 남은 무게는 보존됩니다.`,updateSuccess:`{{count}}개의 스풀 업데이트됨`,updateFailed:`일괄 업데이트 실패`,updatePartial:`{{ok}}개 업데이트, {{failed}}개 실패`,updateAllFailed:`{{count}}개의 업데이트가 모두 실패했습니다 — 재시도를 위해 선택이 유지됩니다`,deleteSuccess:`{{count}}개의 스풀 삭제됨`,deleteFailed:`일괄 삭제 실패`,deletePartial:`{{ok}}개 삭제, {{failed}}개 실패`,deleteAllFailed:`{{count}}개의 삭제가 모두 실패했습니다 — 재시도를 위해 선택이 유지됩니다`,archiveSuccess:`{{count}}개의 스풀 보관됨`,archiveFailed:`일괄 보관 실패`,archivePartial:`{{ok}}개 보관, {{failed}}개 실패`,archiveAllFailed:`{{count}}개의 보관이 모두 실패했습니다 — 재시도를 위해 선택이 유지됩니다`,restoreSuccess:`{{count}}개의 스풀 복원됨`,restoreFailed:`일괄 복원 실패`,restorePartial:`{{ok}}개 복원, {{failed}}개 실패`,restoreAllFailed:`{{count}}개의 복원이 모두 실패했습니다 — 재시도를 위해 선택이 유지됩니다`,invalidHex:`16진수 6자(RRGGBB) 또는 8자(RRGGBBAA)를 입력하세요. 그렇지 않으면 필드가 적용되지 않습니다.`},spoolmanMixedContentTitle:`HTTPS에서 Spoolman을 불러올 수 없음 — 브라우저가 혼합 콘텐츠를 차단함`,spoolmanMixedContentBody:`Bambuddy가 HTTPS로 서비스되고 있지만 Spoolman URL은 여전히 HTTP입니다. 브라우저는 보안상 혼합 콘텐츠를 차단하므로 내장된 Spoolman UI가 렌더링되지 않습니다. 이 기능이 작동하려면 Spoolman이 HTTPS로 접근 가능해야 합니다.`,spoolmanMixedContentFixReverseProxy:`Spoolman을 Bambuddy와 같은 리버스 프록시(Traefik / Nginx / Caddy) 뒤에 HTTPS로 배치한 다음 설정에서 Spoolman URL을 새 HTTPS 주소로 업데이트하세요.`,spoolmanMixedContentFixOpenNewTab:`임시 방편으로 HTTP로 새 브라우저 탭에서 Spoolman을 여세요 — 혼합 콘텐츠 규칙은 내장 프레임에만 적용되므로 독립 탭은 여전히 작동합니다.`,spoolmanOpenInNewTab:`새 탭에서 Spoolman 열기`,labels:{title:`스풀 라벨 인쇄`,selectedCount:`{{count}}개 선택됨`,pickSpools:`라벨을 인쇄할 스풀 선택:`,monochrome:`흑백 (흑백 프린터)`,monochromeHint:`색상 견본을 제거하고 텍스트를 넓힙니다`,startingPosition:`라벨 시작 위치`,startingPositionRange:`시트 템플릿만 해당: L7160은 1–21, 5160은 1–30을 지원합니다.`,startingPositionInvalid:`1에서 {{capacity}} 사이의 정수를 입력하세요.`,startingPositionFirst:`위치 1부터 인쇄를 시작합니다.`,startingPositionSkipped:`첫 번째 시트의 위치 1부터 {{lastPosition}}까지는 비워 둡니다.`,startingPositionRangeError:`이 시트의 시작 위치는 1에서 {{capacity}} 사이여야 합니다.`,searchPlaceholder:`이름, 브랜드 또는 #ID 검색`,filterByMaterial:`재료:`,allMaterials:`전체`,selectVisible:`보이는 모든 항목 선택 ({{count}})`,deselectVisible:`보이는 항목 선택 해제`,clearAll:`모두 초기화`,noSpoolsToShow:`표시할 스풀이 없습니다. 필터를 조정하고 다시 시도하세요.`,noMatches:`현재 검색 또는 필터와 일치하는 스풀이 없습니다.`,printOne:`이 스풀의 라벨 인쇄`,printLabels:`라벨 인쇄…`,bulkTitle:`현재 표시된 {{count}}개에서 라벨을 인쇄할 스풀 선택`,noSpoolsTitle:`라벨을 붙일 스풀 없음`,error:`라벨을 생성할 수 없습니다: {{msg}}`,templates:{box40x30:{label:`박스 라벨 (40 × 30 mm)`,hint:`페이지당 단일 라벨; 일반 DK/Brother 롤 크기, 필라멘트 가방 및 보관함 라벨에 적합.`},box:{label:`박스 라벨 (62 × 29 mm)`,hint:`페이지당 단일 라벨; Brother PT/QL 및 Dymo 소형 라벨에 맞는 크기.`},averyL7160:{label:`Avery L7160 — A4 시트 (38.1 × 63.5 mm × 21)`,hint:`EU 시트; A4 페이지당 21개 라벨.`},avery5160:{label:`Avery 5160 — US Letter 시트 (25.4 × 66.7 mm × 30)`,hint:`US 시트; Letter 페이지당 30개 라벨.`},amsHolderSmall:{label:`AMS 홀더 — 소형 (74 × 33 mm)`,hint:`페이지당 단일 레이블; MakerWorld 모델 752566 (AMS 필라멘트 레이블 홀더)의 인쇄 가능 레이블과 일치합니다.`},amsHolderLarge:{label:`AMS 홀더 — 대형 (75 × 55 mm)`,hint:`페이지당 단일 레이블; AMS 필라멘트 레이블 홀더의 카드스톡 삽입 변형에 맞습니다. 스와치, 브랜드, 재질, ID, QR 코드에 충분한 공간이 있습니다.`}},sortBy:{label:`정렬:`,id:`ID 순`,color:`색상 순`}},csv:{importButton:`CSV 가져오기`,exportButton:`CSV 내보내기`,modalTitle:`CSV에서 스풀 가져오기`,selectFile:`CSV 파일을 선택하거나 여기로 끌어다 놓으세요`,dragHint:`헤더: material(필수), brand, subtype, color_name, rgba, …`,parsing:`파일을 읽는 중…`,previewError:`CSV 파일을 읽을 수 없습니다`,validCount:`유효 {{count}}개`,errorCount:`오류 {{count}}개`,skippedCount:`건너뜀 {{count}}개`,colRow:`행`,colStatus:`상태`,colColor:`색상`,colorResolved:`카탈로그에서 색상 채움`,colorCrossMaterial:`다른 재료에서 색상을 가져옴 — 카탈로그에 정확히 일치하는 항목 없음`,duplicateExisting:`이 재료, 브랜드, 색상의 스풀이 이미 존재합니다 — 그래도 새 스풀로 가져옵니다`,spoolmanHint:`Spoolman 모드에서는 Spoolman의 기본 CSV 가져오기/내보내기를 사용하세요.`,importValidRows:`유효한 {{count}}개 행 가져오기`,noValidRows:`유효한 행 없음`,importing:`가져오는 중…`,importSuccess:`{{count}}개 스풀을 가져왔습니다`,importError:`가져오기 실패`,exportError:`내보내기 실패`},addSpool:`스풀 추가`,editSpool:`스풀 편집`,copySpool:`스풀 복사`,material:`재료`,selectMaterial:`재료 선택...`,subtype:`하위 유형`,brand:`브랜드`,searchBrand:`브랜드 검색...`,useCustomBrand:`"{{brand}}" 사용`,useCustomMaterial:`사용자 지정 재료 사용: {{material}}`,suggestedOptions:`추천`,allOptions:`전체`,colorName:`색상 이름`,colorNamePlaceholder:`제이드 화이트, 파이어 레드...`,color:`색상`,hexColor:`16진수 색상`,pickColor:`사용자 지정 색상 선택`,labelWeight:`라벨 무게`,coreWeight:`빈 스풀 무게`,searchSpoolWeight:`스풀 무게 검색...`,weightUsed:`사용됨`,currentWeight:`남은 무게`,measuredWeight:`측정된 무게`,spoolName:`스풀`,costPerKg:`kg당 비용`,storageLocation:`보관 위치`,temperature:`온도`,humidity:`습도`,battery:`배터리`,storageLocationPlaceholder:`예: 선반 A, 서랍 1`,openInInventory:`재고에서 열기`,measuredWeightError:`측정된 무게는 {{min}}g과 {{max}}g 사이여야 합니다.`,slicerFilament:`슬라이서 필라멘트`,slicerFilamentName:`슬라이서 프리셋 이름`,slicerPreset:`슬라이서 프리셋`,searchPresets:`필라멘트 프리셋 검색...`,selectedPreset:`선택됨`,noPresetsFound:`프리셋을 찾을 수 없음`,tempOverrides:`온도 재정의`,note:`메모`,notePlaceholder:`이 스풀에 대한 추가 메모...`,category:`카테고리`,categoryPlaceholder:`예: 생산, 프로토타입, 고객 A`,categoryNone:`미분류`,lowStockThresholdOverride:`재고 부족 임계값 (이 스풀)`,lowStockThresholdOverrideHelp:`전역 임계값({{global}}%)을 사용하려면 비워두세요.`,clearRfid:`RFID 태그 초기화`,rfidCleared:`RFID 태그가 초기화되었습니다`,archive:`보관`,restore:`복원`,noSpools:`아직 스풀이 없습니다. 첫 번째 스풀을 추가하여 시작하세요.`,noAvailableSpools:`사용 가능한 스풀이 없습니다. 재고에 스풀을 추가하거나 먼저 다른 슬롯에서 해제하세요.`,kProfiles:`K-프로필`,addKProfile:`K-프로필 추가`,assignSpool:`스풀 할당`,unassignSpool:`할당 해제`,assignSuccess:`스풀 할당 및 AMS 슬롯 구성됨`,assignPendingInsert:`할당됨. 스풀을 삽입하면 슬롯이 구성됩니다.`,assignFailed:`스풀 할당 실패`,selectSpool:`이 슬롯에 할당할 스풀 선택`,assigned:`할당됨`,assigning:`할당 중...`,searchSpools:`스풀 검색...`,showAllSpools:`모든 스풀 표시`,spoolmanSpools:`Spoolman 스풀`,allMaterials:`모든 재료`,filterByBrand:`브랜드로 필터...`,showArchived:`보관된 항목 표시`,quickAdd:`빠른 추가 (재고)`,quantity:`수량`,stock:`재고`,configured:`구성됨`,spoolsCreated:`{{count}}개 스풀 생성됨`,spoolsPartiallyCreated:`{{total}}개 중 {{created}}개 스풀 생성됨 (일부 실패)`,spoolCreated:`스풀 생성됨`,spoolUpdated:`스풀 업데이트됨`,spoolDeleted:`스풀 삭제됨`,deepLinkSpoolNotFound:`스풀을 찾을 수 없음`,deepLinkFetchFailed:`스풀을 불러올 수 없음 — 다시 시도하세요`,spoolArchived:`스풀 보관됨`,spoolRestored:`스풀 복원됨`,kProfileSaveFailed:`K-프로필 설정을 저장할 수 없습니다`,syncWeightSpoolNotFound:`스풀을 찾을 수 없음 — 삭제되었을 수 있습니다`,syncWeightSpoolmanUnreachable:`Spoolman에 연결할 수 없음 — 나중에 다시 시도하세요`,syncWeightFailed:`무게 동기화 실패`,spoolmanUnreachable:`Spoolman에 연결할 수 없습니다 — 나중에 다시 시도하세요`,deleteSpoolNotFound:`스풀을 찾을 수 없음 — 이미 삭제되었을 수 있습니다`,deleteFailed:`스풀 삭제 실패`,archiveSpoolNotFound:`스풀을 찾을 수 없음 — 이미 삭제되었을 수 있습니다`,archiveFailed:`스풀 보관 실패`,restoreSpoolNotFound:`스풀을 찾을 수 없음 — 이미 삭제되었을 수 있습니다`,restoreFailed:`스풀 복원 실패`,saveFailed:`변경 사항 저장 실패`,tagClearFailed:`태그 초기화 실패`,deleteConfirm:`이 스풀을 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.`,archiveConfirm:`이 스풀을 보관하시겠습니까?`,advancedSettings:`고급 설정`,filamentInfoTab:`필라멘트 정보`,paProfileTab:`PA 프로필`,colorAndCostTab:`색상 및 비용`,printersTab:`프린터`,filamentInfo:`필라멘트`,additional:`추가`,loadingPresets:`클라우드 프리셋 불러오는 중...`,cloudConnected:`클라우드 연결됨`,cloudNotConnected:`클라우드 연결되지 않음 (기본값 사용)`,recentColors:`최근`,searchColors:`색상 검색...`,searchResults:`검색 결과`,allColors:`모든 색상`,commonColors:`일반 색상`,showLess:`간략히 보기`,showAll:`모두 보기`,noColorsFound:`검색과 일치하는 색상 없음`,noResults:`일치하는 항목 없음`,extraColorsLabel:`추가 색상`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`2~8개의 16진수 색상값을 쉼표로 구분하여 붙여넣으세요. 그라데이션으로 렌더링됩니다.`,extraColorsInvalid:`유효하지 않은 16진수 무시됨: {{tokens}}`,colorEffectLabel:`효과`,colorEffect:{none:`없음`,sparkle:`스파클`,wood:`우드`,marble:`마블`,glow:`글로우`,matte:`매트`,silk:`실크`,galaxy:`갤럭시`,rainbow:`레인보우`,metal:`메탈`,translucent:`반투명`,gradient:`그라데이션`,dualColor:`듀얼 컬러`,triColor:`트리 컬러`,multicolor:`멀티컬러`},selectMaterialFirst:`먼저 필라멘트 정보 탭에서 재료를 선택해 주세요.`,noPrintersConfigured:`구성된 프린터 없음. PA 프로필을 사용하려면 프린터를 추가하세요.`,matchingFilter:`일치`,anyBrand:`모든 브랜드`,anyVariant:`모든 변형`,autoSelect:`자동 선택`,matches:`일치`,match:`일치`,noMatches:`일치 없음`,connected:`연결됨`,offline:`오프라인`,printerOffline:`프린터가 오프라인입니다. 연결하여 보정 프로필을 확인하세요.`,noKProfilesMatch:`선택한 필라멘트와 일치하는 K-프로필이 없습니다.`,leftNozzle:`왼쪽 노즐`,rightNozzle:`오른쪽 노즐`,profilesSelected:`보정 프로필 선택됨`,filamentPreset:`필라멘트 프리셋`,presetUseSpoolDefault:`스풀 프리셋 사용`,presetInherited:`상속됨`,presetOverride:`재정의`,presetNeedsModel:`이 프린터는 아직 모델을 보고하지 않아 전용 프리셋을 지정할 수 없습니다.`,autoMatchPresets:`자동 매칭`,autoMatchPresetsHint:`각 모델 이름이 들어간 스풀 프리셋 변형을 찾습니다`,kProfilesPerPrinter:`K 프로파일`,kProfileNotSet:`설정 안 됨`,kProfileFlowMismatch:`이 프로파일은 {{profile}} 노즐에서 측정되었지만 장착된 노즐은 {{fitted}}이므로 적용되지 않습니다`,nozzle:`노즐`,unknownModel:`알 수 없는 모델`,onePrinter:`프린터 1대`,nPrinters:`프린터 {{n}}대`,filamentPresetsLoadFailed:`이 스풀의 모델별 프리셋을 불러오지 못했습니다`,filamentPresetSaveFailed:`모델별 프리셋을 저장하지 못했습니다`,totalInventory:`총 재고`,totalConsumed:`총 소비량`,byMaterial:`재료별`,inPrinter:`프린터 내`,lowStock:`재고 부족`,sinceTracking:`추적 시작 이후`,loadedInAms:`AMS/외부에 장착됨`,remaining:`남은 양`,weightCheck:`무게 확인`,lastWeighed:`마지막 계량`,neverWeighed:`계량 기록 없음`,search:`스풀 검색...`,showing:`표시 중`,to:`~`,of:`/`,show:`표시`,spools:`스풀`,spool:`스풀`,page:`페이지`,noSpoolsMatch:`결과를 찾을 수 없음`,noSpoolsMatchDesc:`검색 또는 필터를 조정하여 원하는 항목을 찾아보세요.`,active:`활성`,archived:`보관됨`,all:`전체`,used:`사용됨`,new:`새것`,clearFilters:`필터 초기화`,table:`테이블`,cards:`카드`,net:`순`,groupSimilar:`그룹화`,groupedSpools:`동일한 스풀 {{count}}개`,groupedRows:`행`,columns:`열`,configureColumns:`열 구성`,configureColumnsDesc:`드래그하여 열 순서를 변경하거나 화살표를 사용하세요. 눈 아이콘으로 표시 여부를 전환합니다.`,visible:`표시됨`,reset:`초기화`,cancel:`취소`,applyChanges:`변경 사항 적용`,moveUp:`위로 이동`,moveDown:`아래로 이동`,hideColumn:`열 숨기기`,showColumn:`열 표시`,linkToSpool:`스풀에 연결`,tagLinked:`태그가 스풀에 연결됨`,tagLinkFailed:`태그 연결 실패`,tagAlreadyLinked:`태그가 이미 스풀 #{{id}}에 연결됨`,unknownTag:`알 수 없는 RFID 태그 감지됨`,usageHistory:`사용 기록`,noUsageHistory:`사용 기록 없음`,printName:`인쇄 이름`,weightConsumed:`소비 무게`,clearHistory:`초기화`,historyCleared:`사용 기록 초기화됨`,fillSourceLabel:`(재고)`,lowStockThresholdError:`임계값은 0.1에서 99.9 사이여야 합니다`,assignMismatchTitle:`재료 불일치`,assignMismatchMessage:`선택한 스풀 재료 "{{spoolMaterial}}"이(가) {{location}}의 트레이 재료 "{{trayMaterial}}"과(와) 일치하지 않습니다. 그래도 할당하시겠습니까?`,assignMismatchConfirm:`그래도 할당`,assignPartialMismatchMessage:`스풀 재료 "{{spoolMaterial}}"이(가) {{location}}의 "{{trayMaterial}}"과(와) 유사하지만 정확히 일치하지 않습니다. 계속하시겠습니까?`,assignProfileMismatchMessage:`스풀 프로필 "{{spoolProfile}}"이(가) {{location}}의 트레이 프로필 "{{trayProfile}}"과(와) 일치하지 않습니다. 계속하시겠습니까?`,assignReconfigureNote:`AMS 슬롯이 스풀의 프로필을 사용하도록 재구성됩니다.`,spoolmanFilamentCatalog:`Spoolman 필라멘트 카탈로그`,pickFromSpoolmanCatalog:`Spoolman 카탈로그에서 선택…`,spoolmanFilamentSelected:`Spoolman 카탈로그에서 필라멘트 선택됨`,spoolmanFilamentUnlinked:`필라멘트 카탈로그 연결 해제됨`,noSpoolmanFilaments:`Spoolman 카탈로그에서 필라멘트를 찾을 수 없음`,spoolmanFilamentColorSwatch:`필라멘트 색상`,spoolWeightManagedBySpoolman:`빈 스풀 무게는 Spoolman에서 필라멘트 유형별로 관리됩니다`,spoolmanCatalogLoadFailed:`Spoolman 필라멘트 카탈로그 불러오기 실패`,subtitle:`스풀 관리`,storageLocationNone:`위치 미설정`,resetConsumedCounter:`카운터 초기화`,resetConsumedCounterTooltip:`이 스풀의 소비된 그램 카운터를 0으로 초기화합니다. 잔여 무게는 변경되지 않습니다.`,resetConsumedCounterConfirm:`이 스풀의 소비된 그램 카운터를 0으로 초기화하시겠습니까? 이후 인쇄는 처음부터 추적됩니다. 스풀 자체, 잔여 무게 계산 및 설정은 변경되지 않습니다.`,resetAllConsumedCounters:`모든 카운터 초기화`,resetAllConsumedCountersTooltip:`모든 스풀의 소비된 그램 카운터를 0으로 초기화합니다. 잔여 무게는 변경되지 않습니다.`,resetAllConsumedCountersConfirm:`{{count}}개 스풀(아카이브 포함)의 소비된 그램 카운터를 모두 0으로 초기화하시겠습니까? 이는 "총 소비량" 통계를 지워 이후 인쇄가 처음부터 추적되도록 합니다. 스풀과 잔여 무게는 변경되지 않습니다.`,consumedCounterReset:`카운터가 초기화되었습니다`,allConsumedCountersReset:`{{count}}개 스풀의 카운터가 초기화되었습니다`,resetConsumedCounterFailed:`카운터 초기화 실패`},timelapse:{title:`타임랩스`,create:`타임랩스 만들기`,download:`다운로드`,delete:`삭제`,preview:`미리보기`,frameRate:`프레임 속도`,quality:`품질`,processing:`처리 중...`,noTimelapses:`사용 가능한 타임랩스 없음`},ams:{title:`AMS`,slot:`슬롯`,empty:`비어 있음`,emptySlot:`빈 슬롯`,unknown:`알 수 없음`,humidity:`습도`,temperature:`온도`,filamentType:`필라멘트 유형`,filamentColor:`색상`,remaining:`남은 양`,history:`AMS 기록`,noHistory:`기록 없음`,configureSlot:`슬롯 구성`,externalSpool:`외부 스풀`,profile:`프로필`,kFactor:`K 계수`,kFactorShort:`K`,fill:`채우기`,configure:`구성`,used:`사용됨`,remainingUnit:`남음`,slotEmpty:`비어 있음`,slotUnconfigured:`?`,emptySlotReset:`필라멘트가 할당되지 않음`},printModal:{variants:{editNote:`이 대안은 대기열에 추가할 때 정해집니다. 변경하려면 취소 후 다시 추가하세요.`,title:`프린터 대안`,help:`작업 하나, 대기열 한 자리. 조건이 맞는 프린터 중 먼저 비는 프린터가 해당 파일을 인쇄합니다.`,unknownModel:`알 수 없는 모델`,plateFor:`{{filename}}의 플레이트`,moveUp:`위로`,moveDown:`아래로`,queued:`대안 {{count}}개와 함께 대기열에 추가했습니다`},selectPrinter:`프린터 선택`,selectPlate:`플레이트 선택`,filamentMapping:`필라멘트 매핑`,useArchiveMapping:`매핑`,useArchiveMappingTooltip:`유형/색상으로 매칭하는 대신, 이 아카이브에 저장된 AMS 매핑(슬라이서 제공)에서 모든 슬롯을 선택합니다.`,clickToChangeSlot:`클릭하여 슬롯 할당 변경`,reRead:`다시 읽기`,plateN:`플레이트 {{n}}`,plateFilamentsUnreadable:`선택한 플레이트의 필라멘트를 읽을 수 없어 매핑할 수 없습니다. 해당 플레이트를 선택 해제하면 나머지를 대기열에 추가할 수 있습니다.`,totalCost:`총 비용:`,slotRemainingShort:` - {{grams}}g 남음`,printSettings:`인쇄 설정`,bedLeveling:`베드 레벨링`,flowCalibration:`유량 보정`,vibrationCalibration:`진동 보정`,layerInspection:`첫 번째 레이어 검사`,timelapse:`타임랩스`,cancel:`취소`,noPrintersAvailable:`사용 가능한 프린터 없음`,printerBusy:`프린터가 사용 중입니다`,printerOffline:`프린터가 오프라인입니다`,sameTypeDifferentColor:`같은 유형, 다른 색상`,filamentTypeNotLoaded:`필라멘트 유형이 장착되지 않음`,statusReady:`준비됨`,statusColorMismatch:`색상 불일치`,statusTypeNotFound:`유형을 찾을 수 없음`,requiredTooltip:`필요: {{name}} - {{color}}`,manuallySelected:`수동으로 선택됨`,autoMatched:`자동으로 일치됨`,selectSlot:`슬롯 선택`,exactColorMatch:`색상 정확히 일치`,slotForFilament:`{{name}}의 프린터 슬롯`,overrideForFilament:`{{name}}의 필라멘트 재정의`,sameTypeDifferentColorDetail:`같은 유형, 다른 색상: {{required}} 필요, 슬롯에는 {{loaded}}`,requiredTypeNotInPrinter:`필요한 필라멘트 유형을 프린터에서 찾을 수 없습니다.`,whenToPrint:`인쇄 시점`,asap:`최대한 빨리`,queue:`대기열`,schedule:`예약`,dateTime:`날짜 및 시간`,invalidDateTime:`유효한 날짜와 시간을 입력하세요`,openCalendar:`달력 열기`,requireManualStart:`수동 시작 필요`,requirePreviousSuccess:`이전 인쇄가 성공한 경우에만 시작`,autoOffAfter:`완료 후 프린터 전원 끄기`,helpAsap:`인쇄가 대기열 맨 앞에 추가되고 적합한 프린터가 유휴 상태가 되는 즉시 시작됩니다.`,helpSchedule:`프린터가 유휴 상태이면 예약된 시간에 인쇄가 시작됩니다. 사용 중이면 프린터가 사용 가능해질 때까지 대기합니다.`,helpQueue:`인쇄가 대기열 맨 뒤에 추가됩니다.`,leftNozzle:`L`,rightNozzle:`R`,leftNozzleTooltip:`왼쪽 노즐`,rightNozzleTooltip:`오른쪽 노즐`,ftsSameInletHint:`이 출력에 사용할 필라멘트가 모두 필라멘트 트랙 스위치 IN-{{inlet}}에 있습니다. 같은 입구의 필라멘트끼리 교체하면 느립니다. 하나를 반대쪽 입구의 AMS로 옮기면 빨라집니다.`,rackPosition:`랙 위치`,rackPositionTooltip:`이 필라멘트를 출력할 랙의 노즐입니다. 위치 번호는 프린터와 동일합니다.`,rackEmptyPosition:`이 랙 위치는 비어 있습니다`,rackWrongNozzle:`{{has}} 노즐이 장착되어 있습니다. 이 필라멘트에는 {{needs}}이(가) 필요합니다`,filamentOverride:`필라멘트 재정의`,filamentOverrideHint:`선택적으로 모델 기반 할당을 위해 필라멘트를 재정의합니다. 스케줄러는 원래 3MF 값 대신 선택한 필라멘트와 일치시킵니다.`,originalFilament:`원래`,overrideWith:`재정의`,resetToOriginal:`원래대로 초기화`,insufficientFilamentTitle:`필라멘트 부족`,waitingForAmsStatus:`{{printer}}의 AMS 상태를 기다리는 중…`,insufficientFilamentMessage:`일부 할당된 스풀에 이 인쇄에 필요한 것보다 적은 필라멘트가 남아 있습니다:`,insufficientFilamentLine:`{{printer}} - {{slot}}: {{required}}g 필요, {{remaining}}g 남음`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: {{required}}g 필요, 일치하는 스풀 합계 {{remaining}}g (AMS 필라멘트 백업)`,printAnyway:`그래도 인쇄`,forceColorMatch:`색상 일치 강제`,staggerPrinterStarts:`프린터 시작 분산`,staggerGroupSize:`그룹 크기`,staggerInterval:`간격 (분)`,staggerPreview:`{{printers}}대 프린터 → {{size}}대씩 {{groups}}개 그룹, 매 {{interval}}분마다 시작`,staggerLastGroup:`마지막 그룹: {{count}}`,staggerTotal:`합계: {{minutes}}분`,staggerToPrinters:`{{count}}대 프린터에 분산`,gcodeInjection:`자동 인쇄 G-code 삽입`,insufficientBudget:`예산 부족`,unlimitedNoBudget:`무제한 – 예산 한도가 설정되지 않았습니다.`,noPrintableCostCenters:`인쇄에 사용할 수 있는 활성 비용 센터가 없습니다. 관리자에게 인쇄 권한을 요청하세요.`},backup:{includesEncryptionKey:`로컬 백업에는 MFA 암호화 키 파일(DATA_DIR/.mfa_encryption_key)이 포함되어 백업 ZIP이 자체 완결됩니다. ZIP 파일을 민감하게 취급하세요 — 파일을 가진 누구나 내부에 저장된 OIDC 클라이언트 비밀과 TOTP 비밀을 복호화할 수 있습니다.`,title:`백업 및 복원`,createBackup:`백업 만들기`,restoreBackup:`백업 복원`,restoreDescription:`백업 파일에서 모든 데이터 교체`,downloadBackup:`백업 다운로드`,uploadBackup:`백업 업로드`,lastBackup:`마지막 백업`,autoBackup:`자동 백업`,backupNow:`지금 백업`,restoreWarning:`경고: 백업을 복원하면 현재 모든 데이터를 덮어씁니다.`,includeArchives:`아카이브 포함`,includeSettings:`설정 포함`,includeProfiles:`프로필 포함`,backupSuccess:`백업이 성공적으로 생성되었습니다`,restoreSuccess:`백업이 성공적으로 복원되었습니다`,backupFailed:`백업 실패`,restoreFailed:`복원 실패`,restoreNote:`복원 중 가상 프린터가 중지됩니다`,githubBackup:`Git 백업`,enabled:`활성화됨`,cloudLoginRequired:`Bambu 클라우드 로그인 필요. GitHub 백업을 활성화하려면 프로필 → 클라우드 프로필에서 로그인하세요.`,cloudLoginRequiredShort:`클라우드 로그인 필요`,githubDescription:`백업 및 버전 기록을 위해 비공개 GitHub 저장소에 프로필을 자동으로 동기화합니다.`,repositoryUrl:`저장소 URL`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`비보안 HTTP 허용`,allowInsecureHttpHint:`TLS가 없는 개인 네트워크의 자체 호스팅 인스턴스에 활성화`,personalAccessToken:`개인 액세스 토큰`,tokenSaved:`(저장됨)`,enterNewToken:`업데이트하려면 새 토큰 입력`,tokenHintGitHub:`Contents 읽기 및 쓰기 권한이 있는 세분화된 토큰 또는 repo 범위를 가진 클래식 토큰.`,tokenHintGitLab:`api 범위 또는 read_repository와 write_repository를 함께 가진 토큰.`,tokenHintGitea:`write:repository 범위를 가진 토큰.`,tokenHintForgejo:`write:repository 범위를 가진 토큰. 이 저장소 하나로만 제한된 토큰이면 충분합니다.`,branch:`브랜치`,provider:`Git 제공자`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`수동만`,hourly:`매시간`,daily:`매일`,weekly:`매주`,includeInBackup:`백업에 포함`,kProfiles:`K-프로필`,kProfilesDescription:`연결된 프린터의 압력 전진 보정`,noPrintersConnected:`연결된 프린터 없음`,printersConnected:`{{total}}개 중 {{connected}}개 연결됨`,cloudProfiles:`클라우드 프로필`,cloudProfilesDescription:`Bambu 클라우드와 Orca 클라우드의 필라멘트, 프린터 및 프로세스 프리셋`,cloudProfilesAccounts:`연결된 계정 — Bambu 클라우드: {{bambu}}, Orca 클라우드: {{orca}}`,appSettings:`앱 설정`,appSettingsDescription:`Bambuddy 구성 (전체 데이터베이스)`,spoolInventory:`스풀 재고`,spoolInventoryDescription:`필라멘트 스풀, 사용 기록 및 비용 추적`,printArchives:`인쇄 아카이브`,printArchivesDescription:`인쇄 기록 메타데이터 (gcode/3MF 파일 제외)`,lastBackupAt:`마지막 백업:`,noBackupsYet:`아직 백업 없음`,next:`다음:`,startingBackup:`백업 시작 중...`,test:`테스트`,enableBackup:`백업 활성화`,testConnection:`연결 테스트`,enterRepoUrl:`저장소 URL 입력`,enterRepoAndToken:`저장소 URL 및 액세스 토큰 입력`,repoRequired:`저장소 URL이 필요합니다`,tokenRequired:`액세스 토큰이 필요합니다`,githubBackupEnabled:`GitHub 백업 활성화됨`,tokenUpdated:`토큰 업데이트됨`,settingsSaved:`설정 저장됨`,failedToSave:`저장 실패: {{message}}`,backupCompleteFiles:`백업 완료 - {{count}}개 파일 업데이트됨`,backupSkippedNoChanges:`변경 사항 없어 백업 건너뜀`,backupFailed2:`백업 실패: {{message}}`,clearedLogs:`{{count}}개 로그 초기화됨`,failedToClearLogs:`로그 초기화 실패: {{message}}`,restoreFromGit:{button:`Git에서 복원`,title:`Git 백업에서 복원`,subtitle:`커밋과 복원할 항목을 선택하세요`,commitLabel:`백업 커밋`,latestCommit:`최신 백업 (브랜치 최신 커밋)`,categoriesLabel:`복원할 항목`,inspecting:`백업 내용을 읽고 있습니다...`,itemCount:`백업에 {{count}}개`,overwriteLabel:`기존 항목 덮어쓰기`,overwriteOn:`기존 항목이 백업 내용으로 업데이트됩니다.`,overwriteOff:`없는 항목만 추가되고 기존 항목은 그대로 유지됩니다.`,selectedCount:`{{count}}개 선택됨`,restoring:`복원 중...`,confirmTitle:`백업에서 복원하시겠습니까?`,confirmMessage:`선택한 항목을 이 커밋에서 복원합니다. 없는 항목은 추가되고 기존 항목은 그대로 유지됩니다.`,confirmMessageOverwrite:`선택한 항목을 이 커밋에서 복원하고 로컬에 이미 있는 항목을 덮어씁니다. 이 작업은 취소할 수 없습니다.`,kprofilesOverwriteCaveat:`K 프로파일은 예외입니다. 슬롯에 쓰면 프린터의 캘리브레이션이 항상 교체됩니다.`,tally:`복원 {{restored}}개, 건너뜀 {{skipped}}개, 실패 {{failed}}개`,reloadHint:`복원된 데이터가 모든 화면에 반영되도록 Bambuddy를 새로 고치세요.`,partialHint:`위에 표시된 카테고리는 완료되어 저장되었습니다. 표시되지 않은 카테고리는 실행되지 않았습니다.`,failed:`복원에 실패했습니다.`,loadFailed:`백업 저장소를 읽을 수 없습니다.`,details:{notPresent:`이 백업 커밋에는 없습니다`,unreadableJson:`읽을 수 없는 JSON: {{paths}}`,settingsNoPayload:`데이터에 설정이 없습니다`,settingsCredentialsWillSkip:`자격 증명처럼 보이는 키 {{count}}개를 건너뜁니다`,settingsCompanionWillSkip:`자격 증명처럼 보이는 키 {{count}}개를 건너뛰고, 이에 의존하는 스위치 {{companion}}개는 꺼진 상태로 둡니다`,settingsCompanionOnlyWillSkip:`스위치 {{companion}}개는 꺼진 상태로 둡니다 - 각각에 필요한 자격 증명은 백업에서 복원할 수 없습니다`,spoolsUsageCount:`사용 기록 {{count}}건 포함`,archivesMetadataOnly:`메타데이터만 - 3MF 파일과 썸네일은 Git 백업에 포함되지 않습니다`,kprofilesPrinterCount:`프린터 {{count}}대 분량`},notes:{noData:`이 백업에는 이런 종류의 데이터가 없습니다`,archivesPrinterMissing:`일부 아카이브가 더 이상 존재하지 않는 프린터를 참조했습니다 - 연결을 해제했습니다`,archivesProjectMissing:`일부 아카이브가 더 이상 존재하지 않는 프로젝트를 참조했습니다 - 연결을 해제했습니다`,archivesOwnerCleared:`일부 아카이브가 더 이상 존재하지 않는 사용자를 참조했습니다 - 소유자를 비웠으므로 관리자가 다시 지정하기 전까지 archives:read_all 권한이 있는 사용자에게만 보입니다`,archivesOwnerUnmatched:`일부 아카이브가 이 인스턴스에 없는 소유자를 가리킵니다 - 백업의 사용자 ID로 추측하지 않고 소유자를 비웠으므로 관리자가 다시 지정하기 전까지 archives:read_all 권한이 있는 사용자에게만 보입니다`,archivesOwnerUnknown:`일부 아카이브가 소유자 없이 복원되었습니다 - 이 백업에 소유자가 기록되어 있지 않으므로 관리자가 지정하기 전까지 archives:read_all 권한이 있는 사용자에게만 보입니다`,archivesUndeleted:`백업 이후 삭제된 아카이브가 다시 표시됩니다 - 덮어쓰기가 켜져 있었습니다`,archivesMetadataOnly:`복원된 아카이브에는 메타데이터만 있습니다 - 3MF 파일과 썸네일은 Git 백업에 포함되지 않습니다`,spoolUsageUnresolved:`사용 기록 {{count}}건을 건너뛰었습니다 - 해당 스풀이 이 백업의 스풀 목록에 없어 연결할 대상이 없습니다.`,spoolUsageUnlinked:`사용 기록 {{count}}건을 출력 기록 연결 없이 복원했습니다 - 연결을 유지하려면 스풀 재고와 함께 출력 아카이브도 선택하세요.`,spoolTagKept:`스풀 태그 {{count}}개를 그대로 두었습니다 - 백업대로라면 그 사이 스캔된 태그가 지워지거나 다른 스풀로 옮겨졌을 것입니다.`,settingsCredentialsSkipped:`자격 증명처럼 보이는 키 {{count}}개를 건너뛰었습니다 - 비밀 값은 직접 다시 입력하세요`,settingsAuthSkipped:`인증 설정 {{count}}개를 건너뛰었습니다 - 잠금 검사가 계속 동작하도록 설정 > 인증에서 변경하세요`,settingsCompanionSkipped:`{{keys}}을(를) 꺼진 상태로 두었습니다 - 각 항목에 필요한 자격 증명은 백업에서 복원할 수 없고 이 인스턴스에도 저장되어 있지 않아, 켜면 연동이 인증 없이 열립니다`,settingsMqttRelayFailed:`MQTT 설정을 복원했지만 릴레이를 다시 연결하지 못했습니다 - Bambuddy를 재시작하세요`,kprofilesAlwaysOverwrite:`K 프로파일은 항상 프린터의 해당 슬롯을 덮어씁니다`,kprofilesAckUnreliable:`응답하지 않는 프린터도 복원됨으로 집계됩니다 - 프린터에서 프로파일을 확인하세요`,kprofilesPrinterMissing:`시리얼 {{serial}}인 프린터가 없습니다 - 건너뛰었습니다`,kprofilesPrinterOffline:`{{printer}}({{serial}})이(가) 연결되어 있지 않습니다 - 건너뛰었습니다`,kprofilesUnknownNozzle:`{{serial}}의 예상치 못한 노즐 직경 {{nozzle}} - 그대로 전송했습니다`,kprofilesUnmatched:`{{nozzle}}용 프로파일 {{count}}개가 {{printer}}에 대응 항목이 없습니다 - 새 프로파일로 추가했습니다`,kprofilesSendFailed:`{{nozzle}} 프로파일을 {{printer}}({{serial}})에 보내지 못했습니다`,kprofilesRefused:`{{printer}}({{serial}})이(가) {{nozzle}} 프로파일을 거부했습니다: {{reason}}`,kprofilesStepFailed:`K 프로파일 단계를 완료하지 못했습니다 - {{reason}}. 그 전에 복원된 항목은 그대로 저장되어 있습니다.`}},history:`기록`,clear:`초기화`,date:`날짜`,status:`상태`,trigger:`유형`,triggers:{manual:`백업(수동)`,scheduled:`백업(예약)`,restore:`복원`},commit:`커밋`,localBackup:`로컬 백업`,localBackupDescription:`데이터베이스, 아카이브, 업로드 및 모든 파일을 포함한 Bambuddy 데이터의 전체 백업을 만듭니다.`,downloadBackupLabel:`백업 다운로드`,completeBackupZip:`전체 백업: 데이터베이스 + 모든 파일 (ZIP)`,download:`다운로드`,preparingBackup:`백업 준비 중...`,creatingArchive:`백업 아카이브 생성 중... 대용량 아카이브의 경우 시간이 걸릴 수 있습니다.`,downloadingFile:`백업 파일 다운로드 중...`,backupDownloaded:`백업이 성공적으로 다운로드되었습니다`,failedToCreateBackup:`백업 생성 실패: {{message}}`,restore:`복원`,restoreReplacesAll:`복원은 모든 데이터를 교체합니다.`,restoreReplacesAllDetail:`현재 데이터베이스와 파일이 완전히 교체됩니다. 복원 후 재시작이 필요합니다.`,restoreConfirmTitle:`백업 복원`,restoreConfirmMessage:`"{{filename}}"에서 복원하시겠습니까? 현재 데이터베이스와 모든 파일이 완전히 교체됩니다. 복원 후 애플리케이션을 재시작해야 합니다.`,restoreConfirmButton:`백업 복원`,uploadingFile:`백업 파일 업로드 중...`,backupRestoredRestart:`백업 복원됨. Bambuddy를 재시작하세요.`,failedToRestore:`백업 복원 실패. 파일 형식을 확인하세요.`,reloadNow:`지금 새로고침`,creatingBackup:`백업 만드는 중`,restoringBackup:`백업 복원 중`,preparing:`준비 중...`,processing:`처리 중...`,doNotClosePage:`이 페이지를 닫거나 다른 곳으로 이동하지 마세요. 대용량 백업의 경우 몇 분이 걸릴 수 있습니다.`,restoring:`복원 중...`,restoreComplete:`복원 완료`,restoreFailed2:`복원 실패`,importSettings:`백업 파일에서 설정 가져오기`,pleaseWaitRestoring:`데이터가 복원되는 동안 기다려 주세요`,selectBackupFile:`백업 파일 클릭하여 선택 (.json 또는 .zip)`,duplicateHandling:`중복 처리 방법:`,matchPrinters:`프린터`,matchPrintersBy:`일련번호로 일치`,matchSmartPlugs:`스마트 플러그`,matchSmartPlugsBy:`IP 주소로 일치`,matchNotificationProviders:`알림 제공자`,matchNotificationProvidersBy:`이름으로 일치`,matchFilaments:`필라멘트`,matchFilamentsBy:`이름 + 유형 + 브랜드로 일치`,matchArchives:`아카이브`,matchArchivesBy:`콘텐츠 해시로 일치 (항상 건너뜀)`,matchPendingUploads:`대기 중인 업로드`,matchPendingUploadsBy:`파일 이름으로 일치`,matchSettingsTemplates:`설정 및 템플릿`,matchSettingsTemplatesBy:`항상 덮어씀`,replaceExisting:`기존 데이터 교체`,keepExisting:`기존 데이터 유지`,overwriteDescription:`백업 데이터로 이미 존재하는 항목 덮어쓰기`,keepDescription:`아직 존재하지 않는 항목만 복원`,overwriteCaution:`주의:`,overwriteWarning:`덮어쓰기는 현재 구성을 백업 데이터로 교체합니다. 보안상 프린터 액세스 코드는 절대 덮어쓰지 않습니다.`,cancel:`취소`,processingBackup:`백업 파일 처리 중...`,itemsRestored:`복원된 항목`,itemsSkipped:`건너뛴 항목`,restored:`복원됨`,skippedAlreadyExist:`건너뜀 (이미 존재)`,filesCategory:`파일 (3MF, 썸네일 등)`,andMore:`...및 {{count}}개 더`,newApiKeysGenerated:`새 API 키 생성됨`,keysShownOnce:`이 키는 한 번만 표시됩니다. 지금 복사하세요!`,copy:`복사`,noDataFound:`백업 파일에서 복원할 데이터를 찾을 수 없습니다.`,close:`닫기`,scheduledBackup:`예약 백업`,scheduledBackupDescription:`일정에 따라 백업 스냅샷을 자동으로 생성합니다. 출력 디렉토리를 NAS 또는 외부 저장소에 마운트할 수 있습니다.`,frequency:`주기`,backupTime:`시간`,retention:`보존`,retentionDescription:`유지할 백업 수`,outputPath:`출력 경로`,outputPathPlaceholder:`기본값: {{path}}`,outputPathDescription:`기본 위치를 사용하려면 비워두세요`,runNow:`지금 실행`,backupFiles:`백업 파일`,noScheduledBackups:`아직 백업 없음`,deleteBackup:`삭제`,deleteBackupConfirm:`이 백업 파일을 삭제하시겠습니까?`,backupRunning:`백업 진행 중...`,scheduledBackupComplete:`백업이 성공적으로 완료되었습니다`,scheduledBackupFailed:`백업 실패`,nextBackup:`다음 백업`,backupSize:`크기`,localTimeHint:`현지 시간 ({{tz}})`,defaultPathLabel:`기본값:`,pathCheck:{title:`Bambuddy가 이 디렉터리에 쓸 수 없습니다`,howToFix:`해결 방법:`,sandboxed:`Bambuddy 서비스가 {{path}}에 쓸 수 없습니다. systemd 유닛이 ProtectSystem=strict로 실행되어 설치·데이터·로그 디렉터리를 제외한 모든 디렉터리가 서비스에서는 읽기 전용입니다. 사용자 셸에서는 쓸 수 있는 디렉터리라도 마찬가지입니다.`,read_only:`{{path}}이(가) 읽기 전용 파일 시스템에 있습니다.`,permission_denied:`Bambuddy에 {{path}} 쓰기 권한이 없습니다. 디렉터리 소유자와 권한을 확인하세요.`,no_space:`{{path}}이(가) 있는 파일 시스템에 남은 공간이 없습니다.`,not_a_directory:`{{path}}이(가) 존재하지만 디렉터리가 아닙니다.`,missing:`{{path}}이(가) 존재하지 않으며 생성할 수도 없습니다.`,error:`Bambuddy가 {{path}}에 쓸 수 없습니다.`,ephemeralTitle:`이 백업은 컨테이너를 다시 만들면 사라집니다`,container_ephemeral:`{{path}}은(는) 호스트가 아니라 Bambuddy 컨테이너 내부에 있습니다. 여기에 기록된 백업은 컨테이너를 재생성하면 사라집니다. 호스트의 디렉터리를 마운트하세요:`},categories:{settings:`설정`,notification_providers:`알림 제공자`,notification_templates:`알림 템플릿`,smart_plugs:`스마트 플러그`,printers:`프린터`,filaments:`필라멘트`,maintenance_types:`유지 관리 유형`,archives:`아카이브`,projects:`프로젝트`,pending_uploads:`대기 중인 업로드`,external_links:`외부 링크`,api_keys:`API 키`},repoIsPrivate:`저장소가 비공개입니다 — 안전하게 백업할 수 있습니다.`,repoIsPublicWarning:`저장소가 공개입니다. Bambuddy 백업에는 MQTT 자격증명, Home Assistant 토큰, Prometheus 토큰, Bambu Cloud 이메일, K-프로파일을 통한 프린터 액세스 코드가 포함됩니다. 공급자 설정에서 저장소를 비공개로 변경할 때까지 저장이 차단됩니다.`,repoVisibilityUnknown:`저장소 공개 여부를 확인할 수 없습니다. Bambuddy는 비공개로 확인된 저장소에만 백업하며, 저장이 차단됩니다.`},tags:{title:`태그`,addTag:`태그 추가`,editTag:`태그 편집`,deleteTag:`태그 삭제`,tagName:`태그 이름`,tagColor:`태그 색상`,noTags:`태그 없음`,deleteConfirm:`이 태그를 삭제하시겠습니까?`,manageTags:`태그 관리`},uploadModal:{title:`3MF 파일 업로드`,dragDrop:`.3mf 파일을 여기에 드래그 앤 드롭`,or:`또는`,browseFiles:`파일 탐색`,extractionInfo:`프린터 모델은 3MF 파일 메타데이터에서 자동으로 추출됩니다.`,uploaded:`업로드됨`,failed:`실패`,uploading:`업로드 중...`,upload:`업로드`,uploadFailed:`업로드 실패`},editArchive:{title:`아카이브 편집`,name:`이름`,namePlaceholder:`인쇄 이름`,printer:`프린터`,noPrinter:`프린터 없음`,project:`프로젝트`,noProject:`프로젝트 없음`,itemsPrinted:`인쇄된 항목`,itemsPrintedHelp:`이 인쇄 작업에서 생산된 항목 수. 플레이트 전체를 버린 경우 0을 입력하세요.`,filamentUsed:`사용된 필라멘트 (g)`,filamentUsedPlaceholder:`예: 46.16`,filamentUsedHelp:`3MF 없이 보관된 인쇄는 직접 입력하면 필라멘트 합계에 반영됩니다. 3MF가 있는 보관 항목을 다시 스캔하면 이 값은 파일에서 다시 읽어옵니다.`,notes:`메모`,notesPlaceholder:`이 인쇄에 대한 메모 추가...`,externalLink:`외부 링크`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Printables, Thingiverse 또는 다른 출처 링크`,tags:`태그`,tagsPlaceholder:`태그 추가...`,addMoreTags:`더 많은 태그 추가...`,matchingTags:`"{{query}}"와 일치`,existingTags:`기존 태그`,clickToAdd:`(클릭하여 추가)`,status:`상태`,failureReason:`실패 원인`,selectReason:`원인 선택...`,photos:`인쇄 결과 사진`,photosHelp:`+를 클릭하여 인쇄 결과 사진 추가`,printResult:`인쇄 결과`,saving:`저장 중...`,failureReasons:{adhesionFailure:`접착 실패`,spaghettiDetached:`스파게티 / 분리`,layerShift:`레이어 시프트`,cloggedNozzle:`노즐 막힘`,filamentRunout:`필라멘트 소진`,warping:`휨`,stringing:`스트링`,underExtrusion:`압출 부족`,powerFailure:`전원 실패`,userCancelled:`사용자 취소`,noStatusUpdate:`상태 업데이트를 받지 못함`,other:`기타`},statuses:{completed:`완료됨`,failed:`실패`,aborted:`취소됨`,printing:`인쇄 중`}},kProfiles:{title:`K-프로필`,noPrintersConfigured:`구성된 프린터 없음`,addPrinterInSettings:`K-프로필을 관리하려면 설정에서 프린터를 추가하세요`,noActivePrinters:`활성 프린터 없음`,enablePrinterConnection:`K-프로필을 보려면 프린터 연결을 활성화하세요`,loadingProfiles:`K-프로필 불러오는 중...`,printerOffline:`프린터 오프라인`,printerOfflineDesc:`선택한 프린터가 연결되지 않았습니다. 켜서 K-프로필을 확인하세요.`,noMatchingProfiles:`일치하는 프로필 없음`,noMatchingProfilesDesc:`검색 기준과 일치하는 프로필이 없습니다`,noKProfiles:`K-프로필 없음`,noKProfilesDesc:`{{diameter}}mm 노즐에 대한 압력 전진 프로필이 없습니다`,createFirstProfile:`첫 번째 프로필 만들기`,printer:`프린터`,nozzle:`노즐`,refresh:`새로고침`,addProfile:`프로필 추가`,export:`내보내기`,import:`가져오기`,select:`선택`,selectAll:`모두 선택`,delete:`삭제`,searchPlaceholder:`이름 또는 필라멘트로 검색...`,allExtruders:`모든 압출기`,leftOnly:`왼쪽만`,rightOnly:`오른쪽만`,allFlow:`모든 유량`,hfOnly:`HF만`,sOnly:`S만`,sortName:`정렬: 이름`,sortKValue:`정렬: K값`,sortFilament:`정렬: 필라멘트`,leftExtruder:`왼쪽 압출기`,rightExtruder:`오른쪽 압출기`,modal:{addTitle:`K-프로필 추가`,editTitle:`K-프로필 편집`,profileName:`프로필 이름`,profileNamePlaceholder:`내 PLA 프로필`,kValue:`K값`,kValuePlaceholder:`0.020`,kValueHelp:`일반 범위: PLA 0.01~0.06, PETG 0.02~0.10`,filament:`필라멘트`,selectFilament:`필라멘트 선택...`,source:{local:`가져온 것`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`기본 제공`},noFilamentsHelp:`사용할 수 있는 필라먼트가 없습니다. Bambu Cloud에 로그인하거나 프로파일 → 로컬 프로파일에서 프리셋을 가져오세요.`,searchFilaments:`필라먼트 검색...`,noFilamentMatches:`검색과 일치하는 필라먼트가 없습니다`,flowType:`유량 유형`,highFlow:`고유량`,standard:`표준`,nozzleSize:`노즐 크기`,extruder:`압출기`,extruders:`압출기`,left:`왼쪽`,right:`오른쪽`,notes:`메모 (로컬 저장)`,notesPlaceholder:`이 프로필에 대한 메모 추가...`,notesHelp:`메모는 프린터가 아닌 Bambuddy에 저장됩니다`,syncing:`프린터와 동기화 중...`,savingExtruder:`압출기 {{current}}/{{total}}에 저장 중...`,pleaseWait:`기다려 주세요`},deleteConfirm:{title:`프로필 삭제`,cannotUndo:`이 작업은 취소할 수 없습니다`,message:`프린터에서 "{{name}}"을(를) 삭제하시겠습니까?`},bulkDelete:{title:`프로필 삭제`,cannotUndo:`이 작업은 취소할 수 없습니다`,message:`프린터에서 선택한 {{count}}개 프로필을 삭제하시겠습니까?`},toast:{profileSaved:`K-프로필 저장됨`,profilesSaved:`{{count}}개 압출기에 K-프로필 저장됨`,selectAtLeastOneExtruder:`적어도 하나의 압출기를 선택해 주세요`,selectFilament:`먼저 필라먼트를 선택하세요`,filamentNotResolvable:`{{name}}에 해당하는 Bambu 필라먼트 ID가 없어 프린터가 프로파일을 저장할 수 없습니다`,profileDeleted:`K-프로필 삭제됨`,profilesDeleted:`{{count}}개 프로필 삭제됨`,exportedProfiles:`{{count}}개 프로필 내보냄`,importedProfiles:`{{total}}개 중 {{count}}개 프로필 가져옴`,noProfilesToExport:`내보낼 프로필 없음`,invalidFileFormat:`유효하지 않은 파일 형식`,failedToParseImport:`가져오기 파일 파싱 실패`,failedToSaveBatch:`K-프로필 저장 실패`,noteSaved:`메모 저장됨`,failedToSaveNote:`메모 저장 실패`},permission:{noRead:`프로필 새로고침 권한이 없습니다`,noCreate:`프로필 추가 권한이 없습니다`,noUpdate:`K-프로필 업데이트 권한이 없습니다`,noDelete:`K-프로필 삭제 권한이 없습니다`,noExport:`프로필 내보내기 권한이 없습니다`,noImport:`프로필 가져오기 권한이 없습니다`}},virtualPrinter:{title:`가상 프린터`,running:`실행 중`,stopped:`중지됨`,description:{default:`Bambu Studio 및 OrcaSlicer에 표시되는 가상 프린터를 활성화합니다. 이 프린터로 전송된 파일은 인쇄 없이 바로 아카이브됩니다.`,proxy:`실제 프린터로 슬라이서 트래픽을 릴레이하는 프록시를 활성화하여 모든 네트워크에서 원격 인쇄가 가능합니다.`},enable:{title:`가상 프린터 활성화`,visibleInSlicer:`슬라이서 검색에서 "Bambuddy"로 표시됨`,proxyingTo:`{{name}}으로 프록시 중`,notActive:`활성화되지 않음`},model:{title:`프린터 모델`,description:`에뮬레이션할 프린터 모델을 선택하세요.`,restartWarning:`모델 변경 시 가상 프린터가 재시작됩니다`},accessCode:{title:`액세스 코드`,isSet:`액세스 코드가 설정됨`,notSet:`액세스 코드가 설정되지 않음 - 활성화하려면 필요`,placeholder:`8자리 코드 입력`,placeholderChange:`변경하려면 새 코드 입력`,hint:`정확히 8자여야 합니다. 슬라이서가 인증하는 데 사용됩니다.`,charCount:`({{count}}/8)`,inheritedFromTarget:`대상 프린터에서 상속됨`,derivedFromTargetHint:`대상 프린터의 액세스 코드를 사용합니다. 브리지는 슬라이서 인증을 실제 프린터로 전달하므로 코드가 일치해야 합니다 — 변경하려면 프린터 설정에서 액세스 코드를 편집하세요.`,reveal:`액세스 코드 표시`,hide:`액세스 코드 숨기기`},targetPrinter:{title:`대상 프린터`,configured:`프록시 대상 구성됨`,notConfigured:`대상 프린터가 선택되지 않음 - 프록시 모드에 필요`,placeholder:`프린터 선택...`,hint:`슬라이서 트래픽을 프록시할 프린터를 선택하세요. 프린터는 LAN 모드여야 합니다.`,noPrinters:`구성된 프린터 없음. 프록시 모드를 사용하려면 먼저 프린터를 추가하세요.`},remoteInterface:{title:`네트워크 인터페이스 재정의`,configured:`인터페이스 재정의 활성`,optional:`선택사항 - 자동 감지된 IP가 잘못된 경우 사용 (예: 여러 NIC, Docker, VPN)`,placeholder:`자동 감지 (기본값)...`,hint:`SSDP를 통해 광고되고 TLS 인증서에 사용되는 IP 주소를 재정의합니다. Bambuddy에 여러 네트워크 인터페이스가 있을 때 유용합니다.`},mode:{title:`모드`,archive:`아카이브`,archiveDesc:`파일 즉시 아카이브`,review:`검토`,reviewDesc:`아카이브 전 검토`,queue:`대기열`,queueDesc:`아카이브 후 대기열 추가`,proxy:`프록시`,proxyDesc:`실제 프린터로 릴레이`},autoDispatch:{title:`자동 발송`,description:`대기열에 추가될 때 자동으로 인쇄를 시작합니다. 꺼져 있으면 수동 발송을 기다립니다.`},queueForceColorMatch:{title:`색상 일치 강제`,description:`정확한 필라멘트 유형과 색상이 장착되지 않은 프린터에는 발송을 거부합니다. 기본적으로 꺼져 있음 — 이 옵션 없이는 대기열이 모델 전용 매칭을 사용하여 잘못된 색상이 장착된 프린터를 선택할 수 있습니다.`},saveAmsMapping:{title:`AMS 매핑 저장`,description:`슬라이서가 직접 선택한 AMS 슬롯(project_file MQTT 명령에서)을 아카이브에 저장하여, 이후 재인쇄 시 파일의 유형/색상에서 다시 유추하지 않고 동일한 실물 스풀을 재사용하도록 합니다. 기본값은 꺼짐입니다.`},gcodeInjection:{title:`G-code 주입`,description:`설정에서 모델별로 구성한 G-code 스니펫을 이 가상 프린터의 작업에 적용합니다. 기본값은 꺼짐입니다.`},tailscaleDisabled:{title:`Tailscale 통합`,description:`이 가상 프린터가 Tailscale을 통해 노출되도록 표시하려면 활성화하세요. 슬라이서에 붙여넣을 IP를 알 수 있도록 호스트의 Tailscale 주소를 표시합니다. CA 가져오기 단계는 변경되지 않음 — 이 토글은 인증서에 영향을 미치지 않습니다.`},setupRequired:{title:`설정 필요`,description:`가상 프린터 기능이 작동하려면 추가 시스템 구성이 필요합니다. 여기에는 포트 포워딩, 방화벽 규칙 및 플랫폼별 설정이 포함됩니다.`,readGuide:`활성화 전에 설정 가이드를 읽으세요`},archiveNameSource:{title:`아카이브 이름 출처`,description:`가상 프린터를 통해 파일이 도착할 때 새 아카이브의 이름 지정 방법을 선택합니다. "메타데이터"는 3MF의 슬라이서 내장 제목을 사용합니다(기본값). "파일 이름"은 Bambu Studio가 FTP를 통해 전송한 파일 이름을 사용합니다. 참고: Bambu Studio는 3MF에 제목 필드가 있을 경우 "프린터로 보내기" 대화 상자에 입력한 이름을 해당 값으로 덮어쓰므로, 두 모드 모두 동일한 문자열이 표시되는 경우가 많습니다.`,metadata:`메타데이터`,filename:`파일 이름`},howItWorks:{title:`작동 방식`,step1:`같은 LAN에서 가상 프린터는 검색을 통해 슬라이서(Bambu Studio / OrcaSlicer)에 자동으로 나타납니다. 다른 네트워크에서는 IP 주소와 액세스 코드로 수동으로 추가하세요.`,step2:`아카이브, 검토, 대기열 모드에서 슬라이서의 "전송" 버튼을 사용하여 3MF 파일을 Bambuddy에 업로드하세요. 슬라이서는 "인쇄 성공"을 표시하지만 파일은 저장되고 인쇄되지 않습니다.`,step3:`프록시 모드에서 가상 프린터는 모든 트래픽을 실제 프린터로 릴레이합니다 — 직접 연결된 것처럼 즉시 인쇄가 시작됩니다.`},status:{title:`상태 세부 정보`,printerName:`프린터 이름`,model:`모델`,serialNumber:`일련 번호`,mode:`모드`,pendingFiles:`대기 중인 파일`,targetPrinter:`대상 프린터`,ftpPort:`FTP 포트`,mqttPort:`MQTT 포트`,ftpConnections:`FTP 연결`,mqttConnections:`MQTT 연결`},toast:{updated:`가상 프린터 설정 업데이트됨`,failedToUpdate:`설정 업데이트 실패`,copyFailed:`복사 실패 — 텍스트를 수동으로 선택하여 복사해 보세요`,accessCodeRequired:`먼저 액세스 코드를 설정해 주세요`,targetPrinterRequired:`먼저 대상 프린터를 선택해 주세요`,bindIpRequired:`먼저 바인드 IP를 설정해 주세요`,accessCodeEmpty:`액세스 코드는 비워둘 수 없습니다`,accessCodeLength:`액세스 코드는 정확히 8자여야 합니다`,targetCodeChangedRebind:`액세스 코드가 새 대상 프린터에 동기화되었습니다. 새 코드를 적용하려면 슬라이서에서 이 장치를 다시 추가하세요.`,created:`가상 프린터 생성됨`,failedToCreate:`가상 프린터 생성 실패`,deleted:`가상 프린터 삭제됨`,failedToDelete:`가상 프린터 삭제 실패`},list:{title:`가상 프린터`,add:`추가`,addFirst:`가상 프린터 추가`,empty:`구성된 가상 프린터 없음. 하나를 추가하여 시작하세요.`},bindIp:{title:`바인드 인터페이스`,placeholder:`인터페이스 선택...`,hint:`이 가상 프린터가 바인딩할 네트워크 인터페이스. 프린터당 고유해야 합니다.`},proxy:{accessCodeHint:`프록시 모드에서는 슬라이서에서 대상 프린터의 액세스 코드를 사용하세요. 연결은 실제 프린터로 투명하게 전달됩니다.`},addDialog:{title:`가상 프린터 추가`,name:`이름`,hint:`생성 후 액세스 코드, 대상 프린터 및 기타 설정을 구성할 수 있습니다.`,create:`생성`},deleteConfirm:{title:`가상 프린터 삭제`,message:`"{{name}}"을(를) 삭제하시겠습니까? 이 프린터의 모든 서비스가 중지됩니다.`},caCert:{title:`슬라이서 인증서`,description:`가상 프린터는 Bambuddy CA가 서명한 TLS 인증서를 사용합니다. 이 CA 인증서를 슬라이서의 신뢰 저장소에 한 번만 가져오면 연결을 수락합니다 — 명령줄에서 복사할 필요가 없습니다.`,copy:`복사`,copied:`복사됨`,download:`다운로드`,fingerprint:`SHA-256`}},modelViewer:{openInSlicer:`슬라이서에서 열기`,openInSlicerWith:`{{slicer}}에서 열기`,moreSlicerOptions:`슬라이서 옵션 더 보기`,openInSlicerFailed:`슬라이서에서 열 수 없습니다`,tabs:{model:`3D 모델`},notAvailable:`사용 불가`,plates:`플레이트`,allPlates:`모든 플레이트`,plateNumber:`플레이트 {{number}}`,plateCount:`플레이트 {{count}}개`,plateCount_other:`플레이트 {{count}}개`,objectCount:`개체 {{count}}개`,objectCount_other:`개체 {{count}}개`,filamentCount:`필라멘트 {{count}}개`,filamentCount_other:`필라멘트 {{count}}개`,eta:`예상 {{minutes}}분`,noPreview:`이 파일에 대한 미리보기를 사용할 수 없습니다`,pagination:{pageOf:`{{total}}페이지 중 {{current}}`,prev:`이전`,next:`다음`},errors:{failedToLoad:`파일 불러오기 실패`,noMeshes:`3MF 파일에서 메쉬를 찾을 수 없음`,unsupportedFormat:`지원되지 않는 파일 형식`}},maintenanceDescriptions:{lubricateCarbonRods:`부드러운 움직임을 위해 카본 로드에 윤활유 도포`,lubricateRails:`부드러운 움직임을 위해 선형 레일에 윤활유 도포`,cleanNozzle:`막힘 방지를 위해 핫엔드와 노즐 청소`,checkBelts:`정확한 인쇄를 위해 벨트 장력 확인`,cleanBuildPlate:`접착력 향상을 위해 빌드 플레이트 청소`,checkExtruder:`마모 여부 확인을 위해 압출기 기어 점검`,checkCooling:`냉각 팬이 제대로 작동하는지 확인`,generalInspection:`전반적인 프린터 점검`,cleanCarbonRods:`마찰 감소를 위해 카본 로드 청소`,lubricateSteelRods:`부드러운 움직임을 위해 스틸 로드에 윤활유 도포`,cleanSteelRods:`마찰 감소를 위해 스틸 로드 청소`,cleanLinearRails:`먼지와 이물질 제거를 위해 선형 레일 닦기`,checkPtfeTube:`마모 또는 손상 여부 확인을 위해 PTFE 튜브 점검`,replaceHepaFilter:`공기 품질을 위해 HEPA 필터 교체`,replaceCarbonFilter:`활성탄 필터 교체`,lubricateLeftNozzleRail:`왼쪽 노즐 레일 윤활 (H2 시리즈)`},haSensors:{label:`센서`,unavailable:`사용 불가`,blocksPrints:`{{entity}} — 경고 중에는 인쇄를 보류합니다`,states:{open:`열림`,closed:`닫힘`,unlocked:`잠금 해제`,locked:`잠김`,detected:`감지됨`,clear:`없음`,wet:`젖음`,dry:`건조`,problem:`문제`,ok:`정상`,running:`작동 중`,stopped:`정지`,on:`켜짐`,off:`꺼짐`},sectionTitle:`Home Assistant 센서 (프린터)`,add:`센서 추가`,addTitle:`Home Assistant 센서 추가`,editTitle:`Home Assistant 센서 편집`,empty:`아직 센서가 없습니다. Home Assistant의 도어 센서나 온도계를 연결하면 프린터 카드에 표시됩니다.`,unknownPrinter:`알 수 없는 프린터`,badgeBlocks:`인쇄 보류`,badgeNotifies:`알림`,badgeHidden:`카드에서 숨김`,printer:`프린터`,entity:`엔터티`,searchPlaceholder:`엔터티 검색...`,noEntities:`일치하는 엔터티 없음`,name:`표시 이름`,alertWhen:`경고 조건`,alertNever:`없음 — 표시만`,alertAbove:`초과`,alertBelow:`미만`,alertHint:`경고 상태가 되면 프린터 카드에서 강조되고 아래 옵션이 활성화됩니다.`,showOnCard:`프린터 카드에 표시`,notifyOnAlert:`경고가 시작되면 알림 보내기`,blockPrint:`경고 중에는 대기 중인 인쇄를 보류`,blockPrintHint:`작업은 대기열에 남아 있다가 센서가 해제되면 자동으로 시작됩니다. Home Assistant에 연결할 수 없는 동안에는 무시됩니다.`,toast:{created:`센서를 추가했습니다`,updated:`센서를 저장했습니다`,deleted:`센서를 삭제했습니다`},error:{pickEntity:`Home Assistant 엔터티를 선택하세요`,nameRequired:`표시 이름을 입력하세요`,printerRequired:`프린터를 선택하세요`,alertRequired:`먼저 경고 조건을 설정하세요`}},locationHaSensors:{sectionTitle:`Home Assistant 센서 (보관 위치)`,sectionDescription:`Home Assistant의 온도, 습도, 배터리 센서를 보관 위치에 연결하면 필라멘트 카드와 표에 실시간 값이 표시됩니다. 위치당 카테고리별로 센서를 하나만 등록할 수 있습니다.`,add:`센서 추가`,addTitle:`Home Assistant 센서 추가`,editTitle:`Home Assistant 센서 편집`,empty:`아직 센서가 없습니다. Home Assistant의 온도나 습도 센서를 연결하면 필라멘트 카드에 표시됩니다.`,unknownLocation:`알 수 없는 위치`,location:`보관 위치`,showOnCard:`필라멘트 카드에 표시`,overwriteConfirm:{title:`기존 센서를 교체하시겠습니까?`,messageTemperature:`"{{location}}"에는 이미 연결된 온도 센서가 있습니다: {{name}}. 계속하면 교체됩니다.`,messageHumidity:`"{{location}}"에는 이미 연결된 습도 센서가 있습니다: {{name}}. 계속하면 교체됩니다.`,messageBattery:`"{{location}}"에는 이미 연결된 배터리 센서가 있습니다: {{name}}. 계속하면 교체됩니다.`},autoAdd:{confirmTitle:`다른 센서도 추가할까요?`,confirmMessage:`Bambuddy가 이 위치의 다른 센서도 찾았습니다. 추가할 항목을 선택하세요.`,added:`다음도 추가됨: {{names}}`,noneFound:`이 위치에 일치하는 온도, 습도 또는 배터리 센서를 찾을 수 없습니다.`,onlyThisOne:`이것만`},options:{buttonLabel:`센서 옵션`,title:`위치 센서 옵션`,description:`이 값은 위치의 첫 번째 센서와 함께 온도, 습도 또는 배터리 센서가 자동으로 연결될 때 사용됩니다.`,generalSettings:`일반 설정`,pollInterval:`업데이트 간격(초)`,pollIntervalHint:`Bambuddy가 Home Assistant를 폴링하여 화면의 센서 값을 갱신하는 주기입니다. 최소 60초.`,colorizeValues:`경보 임계값에 따라 센서 값에 색상 표시`,aboveColor:`임계값 초과 색상`,belowColor:`임계값 미만 색상`,optimalColor:`최적값 색상`,colors:{red:`빨강`,orange:`주황`,yellow:`노랑`,green:`초록`,blue:`파랑`,purple:`보라`,pink:`분홍`},saved:`옵션이 저장되었습니다`,saveFailed:`옵션 저장에 실패했습니다`,reset:`초기화`,resetConfirm:{title:`기존 위치 센서를 모두 재설정하시겠습니까?`,message:`위에서 설정한 값으로 기존의 모든 보관 위치 온도, 습도, 배터리 센서의 경보 임계값, 알림, 카드 표시 여부를 덮어쓰고, 각 센서의 이름을 Home Assistant의 친숙한 이름으로 복원합니다. 프린터 센서는 영향을 받지 않습니다. 이 작업은 되돌릴 수 없습니다. 센서 수에 따라 시간이 다소 걸릴 수 있습니다.`},resetDone:`{{count}}개의 위치 센서에 적용되었습니다`,resetFailed:`위치 센서 재설정에 실패했습니다`},deleteAllConfirm:{title:`모든 센서를 삭제하시겠습니까?`,message:`"{{location}}"에 연결된 모든 센서({{count}}개)가 삭제됩니다. 이 작업은 되돌릴 수 없습니다.`},currentlyBound:`현재 연결됨: {{entity}}`,error:{locationRequired:`보관 위치를 선택하세요`},toast:{created:`센서를 추가했습니다`,updated:`센서를 저장했습니다`,deleted:`센서를 삭제했습니다`}},smartPlugs:{offline:`오프라인`,admin:`관리자`,openPlugAdminPage:`플러그 관리 페이지 열기`,deleteSmartPlug:`스마트 플러그 삭제`,turnOnSmartPlug:`스마트 플러그 켜기`,turnOffSmartPlug:`스마트 플러그 끄기`,turnOn:`켜기`,turnOff:`끄기`,addSmartPlug:{scanningNetwork:`네트워크 스캔 중...`,chooseEntity:`엔티티 선택...`,connectionFailed:`연결 실패`,searchEntities:`엔티티 검색...`,searchPowerSensors:`전력 센서 검색...`,searchEnergySensors:`에너지 센서 검색...`,placeholders:{plugName:`거실 플러그`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`전력 토픽과 같거나 다름`}},linkedTo:`연결됨:`,monitorOnly:`모니터만`,alerts:`알림`,scheduleOn:`켜기 {{time}}`,scheduleOff:`끄기 {{time}}`,on:`켜짐`,off:`꺼짐`,power:`전력`,kwhToday:`오늘 kWh`,settings:`설정`,automationSettings:`자동화 설정`,showInSwitchbar:`스위치바에 표시`,quickAccessSidebar:`사이드바에서 빠른 접근`,enabled:`활성화됨`,enableAutomation:`이 플러그의 자동화 활성화`,autoOn:`자동 켜기`,autoOnDescription:`인쇄 시작 시 켜기`,autoOff:`자동 끄기`,autoOffDescription:`인쇄 완료 시 끄기 (1회)`,autoOffPersistent:`계속 활성화`,autoOffPersistentDescription:`1회성 대신 인쇄 사이에 활성화 유지`,controlsPrinterPower:`프린터에 전원 공급`,controlsPrinterPowerDescription:`이 플러그가 액세서리(필터 팬, 조명)에만 전원을 공급한다면 끄세요. 그렇지 않으면 플러그를 끌 때 프린터가 오프라인으로 표시됩니다.`,turnOffDelayMode:`끄기 지연 모드`,time:`시간`,temp:`온도`,delayMinutes:`지연 (분)`,tempThreshold:`온도 임계값 (°C)`,tempThresholdDescription:`노즐이 이 온도 이하로 냉각될 때 끄기`,edit:`편집`,deleteConfirm:`"{{name}}"을(를) 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.`,turnOnConfirm:`"{{name}}"을(를) 켜시겠습니까?`,turnOffConfirm:`"{{name}}"을(를) 끄시겠습니까? 연결된 장치의 전원이 차단됩니다.`,failedToTurn:`"{{name}}" {{action}} 실패`,unknown:`알 수 없음`,addTitle:`스마트 플러그 추가`,editTitle:`스마트 플러그 편집`,stopScanning:`스캔 중지`,discoverTasmota:`Tasmota 장치 검색`,foundDevices:`{{count}}개 장치 발견 - 클릭하여 선택:`,noDevicesFound:`네트워크에서 Tasmota 장치를 찾을 수 없음`,haNotConfigured:`Home Assistant가 구성되지 않았습니다.`,haSettingsPath:`설정 → 네트워크 → Home Assistant`,selectEntity:`엔티티 선택 *`,ipAddress:`IP 주소 *`,nameLabel:`이름 *`,username:`사용자 이름`,password:`비밀번호`,authHint:`Tasmota 장치에 인증이 필요하지 않으면 비워두세요`,linkToPrinter:`프린터에 연결`,noPrinter:`프린터 없음 (수동 제어만)`,linkingDescription:`연결하면 인쇄 시작/완료 시 자동 켜기/끄기가 활성화됩니다`,powerAlerts:`전력 알림`,alertAbove:`초과 시 알림 (W)`,alertBelow:`미만 시 알림 (W)`,alertDescription:`전력 소비가 이 임계값을 초과할 때 알림 받기. 해당 방향을 비활성화하려면 비워두세요.`,dailySchedule:`일일 스케줄`,turnOnAt:`켜기 시각`,turnOffAt:`끄기 시각`,scheduleDescription:`매일 이 시간에 자동으로 켜기/끄기. 해당 동작을 건너뛰려면 비워두세요.`,showOnPrinterCard:`프린터 카드에 표시`,displayOnPrinterCard:`프린터 카드에 버튼 표시`,connectedResult:`연결됨!`,deviceLabel:`장치: {{name}} - `,stateLabel:`상태: {{state}}`,test:`테스트`,delete:`삭제`,save:`저장`,add:`추가`,cancel:`취소`,failedToStartScan:`스캔 시작 실패`,nameRequired:`이름이 필요합니다`,entityRequired:`Home Assistant 플러그에는 엔티티가 필요합니다`,mqttTopicRequired:`전력, 에너지 또는 상태 모니터링을 위한 MQTT 토픽이 하나 이상 구성되어야 합니다`,loadingEntities:`엔티티 불러오는 중...`,loading:`불러오는 중...`,failedToLoadEntities:`엔티티 불러오기 실패: {{error}}`,noEntitiesMatching:`"{{search}}"과 일치하는 엔티티를 찾을 수 없음`,noEntitiesAvailable:`사용 가능한 엔티티 없음`,searchingEntities:`모든 엔티티 검색 중 ({{count}}개 발견)`,showingEntities:`switch, light, input_boolean 표시 중 ({{count}}개 사용 가능)`,energyMonitoringOptional:`에너지 모니터링 (선택사항)`,energyMonitoringHint:`전력/에너지 데이터를 제공하는 센서를 검색하여 선택하세요.`,powerSensorW:`전력 센서 (W)`,energyTodayKwh:`오늘 에너지 (kWh)`,totalEnergyKwh:`총 에너지 (kWh)`,noMatchingSensors:`일치하는 센서 없음`,none:`없음`,mqttNotConfigured:`MQTT 브로커가 구성되지 않았습니다.`,mqttSettingsPath:`설정 → 네트워크 → MQTT 게시`,mqttNotConfiguredSuffix:`(게시를 활성화할 필요는 없고 브로커 세부 정보만 입력하면 됩니다).`,mqttMonitorOnlyDescription:`MQTT 플러그는 MQTT 구독을 통해 전력/에너지 데이터를 받습니다. 켜기/끄기 제어는 불가능 — MQTT 브로커나 홈 자동화 시스템을 사용하세요.`,powerMonitoring:`전력 모니터링`,energyMonitoring:`에너지 모니터링`,stateMonitoring:`상태 모니터링`,optional:`선택사항`,topic:`토픽`,jsonPath:`JSON 경로`,multiplier:`배수`,onValue:`ON 값`,mqttPowerHint:`JSON 경로는 JSON 페이로드에서 값을 추출합니다 (예: "power_l1"). 토픽이 원시 숫자 값을 게시하면 비워두세요.
 mW→W에는 배수 0.001, kW→W에는 1000을 사용하세요.`,mqttEnergyHint:`JSON 경로는 JSON 페이로드에서 값을 추출합니다. 원시 값에는 비워두세요.
 Wh→kWh에는 배수 0.001, MWh→kWh에는 1000을 사용하세요.`,mqttStateHint:`JSON 경로는 JSON 페이로드에서 값을 추출합니다. 원시 값에는 비워두세요.
-ON 값: "ON"을 의미하는 정확한 문자열. 자동 감지(ON, true, 1)를 위해 비워두세요.`,restControl:`제어`,restOnUrl:`켜기 URL`,restOffUrl:`끄기 URL`,restOnBody:`ON 요청 본문`,restOffBody:`OFF 요청 본문`,restMethod:`HTTP 방법`,restHeaders:`사용자 지정 헤더 (JSON)`,restStatusUrl:`상태 URL`,restStatusPath:`상태 JSON 경로`,restStatusOnValue:`ON 값`,restPowerUrl:`전력 URL`,restPowerPath:`전력 JSON 경로`,restPowerMultiplier:`전력 배수`,restEnergyUrl:`에너지 URL`,restEnergyPath:`에너지 JSON 경로 (오늘)`,restEnergyTotalPath:`에너지 JSON 경로 (누적값)`,restEnergyTotalMultiplier:`누적값 배율`,restEnergyTotalPathHint:`예: aenergy.total`,restEnergyTotalHint:`많은 플러그가 — Shelly는 모두 — 초기화되지 않는 누적 카운터만 보고합니다. 그 값은 위 항목이 아니라 여기에 입력하세요. 오늘 사용량으로 읽으면 자정에 초기화되지 않고, 어제와 총계는 계속 비어 있게 됩니다. Bambuddy가 누적값에서 오늘과 어제를 계산하며, 이를 위해 하루에서 이틀 치 측정값이 필요합니다. Shelly는 와트시로 보고하므로 배율은 0.001을 사용하세요.`,restEnergyMultiplier:`에너지 배수`,restUrlRequired:`REST 플러그에는 URL(ON 또는 OFF) 중 하나 이상이 필요합니다`,restHeadersHint:`예: {"Authorization": "Bearer your-token"}`,restBodyHint:`예: ON, {"state": "on"}`,restStatusHint:`현재 상태를 폴링할 URL`,restPathHint:`예: state 또는 data.power.status`,restPowerUrlHint:`전력 데이터의 별도 URL (비어 있으면 상태 URL 사용)`,restEnergyUrlHint:`에너지 데이터의 별도 URL (비어 있으면 상태 URL 사용)`,restEnergyHint:`각 값은 자체 URL을 사용하거나 상태 URL로 대체할 수 있습니다. 단위 변환에 배수를 사용하세요 (예: Wh→kWh에 0.001).`,testConnection:`연결 테스트`,connectionSuccess:`연결 성공`,noSwitchesInSwitchbar:`스위치바에 스위치 없음`,enableSwitchbarHint:`설정 > 스마트 플러그에서 "스위치바에 표시"를 활성화하세요`,autoOffAfterDrying:`건조 후 자동 끄기`,autoOffAfterDryingDescription:`AMS 건조가 완료되면 끄기`,delayAfterDryingMinutes:`건조 후 지연 (분)`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`이메일`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`SMTP 이메일 알림`,telegram:`Telegram 봇을 통한 알림`,discord:`Webhook을 통해 Discord 채널로 전송`,ntfy:`무료, 자체 호스팅 가능한 푸시 알림`,pushover:`간단하고 신뢰할 수 있는 푸시 알림`,callmebot:`CallMeBot을 통한 무료 WhatsApp 알림`,webhook:`모든 URL에 일반 HTTP POST`,homeassistant:`Home Assistant 대시보드의 지속적인 알림`,bark:`Bark를 통한 iOS 푸시 알림(셀프 호스팅 가능)`},lastSuccess:`마지막: {{date}}`,error:`오류`,printer:`프린터:`,allPrinters:`모든 프린터`,sendTestNotification:`테스트 알림 전송`,eventSettings:`이벤트 설정`,enabled:`활성화됨`,sendFromProvider:`이 제공자에서 알림 전송`,printEvents:`인쇄 이벤트`,printerStatus:`프린터 상태`,amsAlarms:`AMS 알람`,amsHtAlarms:`AMS-HT 알람`,printQueue:`인쇄 대기열`,start:`시작`,plateCheck:`플레이트 확인`,complete:`완료`,failed:`실패`,stopped:`중지됨`,progress:`진행률`,offline:`오프라인`,lowFilament:`필라멘트 부족`,maintenance:`유지 관리`,amsHumidity:`AMS 습도`,amsTemp:`AMS 온도`,amsDryingSuspended:`건조 중단됨`,amsHtHumidity:`AMS-HT 습도`,amsHtTemp:`AMS-HT 온도`,bedCooled:`베드 냉각됨`,firstLayer:`첫 번째 레이어`,quiet:`방해 금지`,digest:`요약 {{time}}`,printStarted:`인쇄 시작됨`,plateNotEmpty:`플레이트 비어 있지 않음`,plateNotEmptyDescription:`인쇄 전 개체 감지됨`,plateClearRequired:`플레이트 비움 확인 필요`,plateClearRequiredDescription:`인쇄 완료, 대기열이 플레이트 확인을 기다림`,plateClear:`플레이트 확인`,printCompleted:`인쇄 완료됨`,bedCooledLabel:`베드 냉각됨`,bedCooledDescription:`인쇄 후 베드가 임계값 이하로 냉각됨`,firstLayerCompleteLabel:`첫 번째 레이어 완료`,firstLayerCompleteDescription:`첫 번째 레이어 완료 시 스냅샷과 함께 알림`,missingSpoolAssignmentLabel:`스풀 할당 누락`,billingChargeFailedLabel:`결제 처리 실패`,billingChargeFailedDescription:`인쇄 비용을 기록하지 못한 경우 알림`,missingSpoolAssignmentDescription:`인쇄 시작 시 필요한 트레이에 할당된 스풀이 없을 때 알림`,printFailed:`인쇄 실패`,printStopped:`인쇄 중지됨`,progressMilestones:`진행률 이정표`,progressMilestonesDescription:`25%, 50%, 75%에서 알림`,printerOffline:`프린터 오프라인`,printerError:`프린터 오류`,aiFailureDetection:`AI 실패 감지`,aiFailureDetectionDescription:`Obico AI가 인쇄 실패 가능성을 감지하면 알림`,lowFilamentLabel:`필라멘트 부족`,maintenanceDue:`유지 관리 필요`,maintenanceDueDescription:`유지 관리가 필요할 때 알림`,amsHumidityHigh:`AMS 습도 높음`,amsHumidityHighDescription:`일반 AMS 습도가 임계값 초과`,amsTemperatureHigh:`AMS 온도 높음`,amsTemperatureHighDescription:`일반 AMS 온도가 임계값 초과`,amsDryingSuspendedTitle:`자동 건조 중단`,amsDryingSuspendedDescription:`습도가 임계값 아래로 내려가지 않아 AMS 유닛의 자동 건조를 중단했습니다`,amsHtHumidityHigh:`AMS-HT 습도 높음`,amsHtHumidityHighDescription:`AMS-HT 습도가 임계값 초과`,amsHtTemperatureHigh:`AMS-HT 온도 높음`,amsHtTemperatureHighDescription:`AMS-HT 온도가 임계값 초과`,inventoryAlerts:`재고 알림`,stockReorderAlert:`재주문 알림`,stockReorderAlertDescription:`SKU가 재주문 시점에 도달함`,stockBreakAlert:`재고 소진 알림`,stockBreakAlertDescription:`보충 전에 재고가 소진될 것임`,jobAdded:`작업 추가됨`,jobAddedDescription:`대기열에 작업 추가됨`,jobAssigned:`작업 할당됨`,jobAssignedDescription:`모델 기반 작업이 프린터에 할당됨`,jobStarted:`작업 시작됨`,jobStartedDescription:`대기열 작업 인쇄 시작됨`,jobWaiting:`작업 대기 중`,jobWaitingDescription:`필라멘트 또는 프린터를 기다리는 작업`,jobSkipped:`작업 건너뜀`,jobSkippedDescription:`작업 건너뜀 (이전 실패)`,jobFailed:`작업 실패`,jobFailedDescription:`작업 시작 실패`,queueComplete:`대기열 완료`,queueCompleteDescription:`모든 대기열 작업 완료`,quietHours:`방해 금지 시간`,noNotificationsDuring:`이 시간 동안 알림 없음`,editProviderToChangeQuietHours:`방해 금지 시간을 변경하려면 제공자를 편집하세요`,dailyDigest:`일일 요약`,batchNotifications:`알림을 하나의 일일 요약으로 묶기`,sendAt:`{{time}}에 전송`,editProviderToChangeDigestTime:`요약 시간을 변경하려면 제공자를 편집하세요`,edit:`편집`,deleteProvider:`알림 제공자 삭제`,deleteConfirm:`"{{name}}"을(를) 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.`,delete:`삭제`,addTitle:`알림 제공자 추가`,editTitle:`알림 제공자 편집`,nameLabel:`이름 *`,namePlaceholder:`내 알림`,providerTypeLabel:`제공자 유형 *`,configuration:`구성`,testConfiguration:`구성 테스트`,printerFilter:`프린터 필터`,onlyFromPrinter:`이 프린터의 이벤트에 대한 알림만 전송`,quietHoursDnd:`방해 금지 시간`,quietStart:`시작`,quietEnd:`종료`,dailyDigestLabel:`일일 요약`,sendDigestAt:`요약 전송 시각`,digestCollected:`이벤트가 수집되어 이 시간에 하나의 요약으로 전송됩니다`,notificationEvents:`알림 이벤트`,progressPercent:`(25%, 50%, 75%)`,bedCooledAfterPrint:`(인쇄 완료 후)`,haSensorAlert:`프린터 센서 경고`,haSensorAlertDescription:`(연결된 Home Assistant 센서에 주의가 필요합니다)`,locationHaSensorAlert:`보관 위치 센서 경고`,locationHaSensorAlertDescription:`(보관 위치에 연결된 Home Assistant 센서에 주의가 필요합니다)`,eventPriority:{sectionTitle:`ntfy 우선순위`,helpNtfy:`각 활성화된 이벤트에 대한 우선순위를 선택하세요. ntfy는 이를 사용하여 알림을 에스컬레이션합니다(소리, 가시성, 푸시 동작). 여기서 설정되지 않은 수준은 ntfy 서버 기본값을 사용합니다.`,min:`최소`,low:`낮음`,default:`기본값`,high:`높음`,urgent:`긴급`},cancel:`취소`,save:`저장`,add:`추가`,nameRequired:`이름이 필요합니다`,fieldRequired:`{{field}}이(가) 필요합니다`,haDataInvalid:`Data 필드는 유효한 JSON 객체여야 합니다(예: {"priority": "high", "ttl": 0})`,phoneNumber:`전화번호`,apiKey:`API 키`,serverUrl:`서버 URL`,topic:`토픽`,authToken:`인증 토큰`,userKey:`사용자 키`,appToken:`앱 토큰`,priority:`우선순위`,pushoverRetry:`긴급 재알림 (초)`,pushoverExpire:`긴급 만료 (초)`,botToken:`봇 토큰`,chatId:`채팅 ID`,telegramThreadId:`포럼 주제 ID`,telegramThreadIdHelp:`선택 사항. 포럼 그룹의 특정 주제로 전송합니다. 주제 링크의 마지막 숫자입니다 (t.me/c/.../25). 비워 두면 General 주제로 전송됩니다.`,telegramThreadIdInvalid:`포럼 주제 ID는 숫자여야 합니다.`,smtpServer:`SMTP 서버`,smtpPort:`SMTP 포트`,security:`보안`,authentication:`인증`,username:`사용자 이름`,password:`비밀번호`,fromEmail:`발신 이메일`,toEmail:`수신 이메일`,webhookUrl:`Webhook URL`,payloadFormat:`페이로드 형식`,authorization:`인증`,titleFieldName:`제목 필드 이름`,messageFieldName:`메시지 필드 이름`,editTemplate:`템플릿 편집: {{name}}`,titleLabel:`제목`,bodyLabel:`본문`,titlePlaceholder:`알림 제목...`,bodyPlaceholder:`알림 본문...`,availableVariables:`사용 가능한 변수`,clickToInsert:`클릭하여 본문의 커서 위치에 삽입`,livePreview:`실시간 미리보기`,hide:`숨기기`,show:`표시`,loadingPreview:`미리보기 불러오는 중...`,enterTemplateContent:`미리보기를 보려면 템플릿 내용을 입력하세요`,titlePreview:`제목:`,bodyPreview:`본문:`,resetToDefault:`기본값으로 초기화`,titleRequired:`제목이 필요합니다`,bodyRequired:`본문이 필요합니다`,notificationLog:`알림 로그`,showFailedOnly:`실패만`,last24Hours:`최근 24시간`,last7Days:`최근 7일`,last30Days:`최근 30일`,last90Days:`최근 90일`,justNow:`방금`,noFailedNotifications:`실패한 알림 없음`,noNotificationsLogged:`기록된 알림 없음`,unknownProvider:`알 수 없는 제공자`,logTitle:`제목`,logMessage:`메시지`,logError:`오류`,logProvider:`제공자: {{type}}`,logTime:`시간: {{time}}`,refresh:`새로고침`,clearOld:`오래된 것 삭제`,statsSummary:`최근 {{days}}일:`,statsNotifications:`알림`,statsSent:`{{count}}개 전송됨`,statsFailed:`{{count}}개 실패`,eventTypes:{print_start:`인쇄 시작됨`,print_complete:`인쇄 완료`,print_failed:`인쇄 실패`,print_stopped:`인쇄 중지됨`,print_progress:`진행률`,printer_offline:`프린터 오프라인`,printer_error:`프린터 오류`,filament_low:`필라멘트 부족`,maintenance_due:`유지 관리 필요`,test:`테스트`},userEmail:{title:`알림`,emailNotifications:`이메일 알림`,emailNotificationsDesc:`내 인쇄 작업에 대한 이메일 알림을 받습니다. 이메일은 고급 인증에서 구성된 시스템 SMTP 설정을 사용하여 전송됩니다.`,sendingTo:`알림이 전송될 주소`,noEmailWarning:`계정에 이메일 주소가 없습니다. 관리자에게 연락하여 추가하세요.`,printJobNotifications:`인쇄 작업 알림`,printJobNotificationsDesc:`내가 제출한 인쇄 작업에 대해 이메일 알림을 트리거할 이벤트를 선택하세요.`,printJobStarts:`인쇄 작업 시작`,printJobStartsDesc:`인쇄 작업이 시작될 때 알림 받기.`,printJobFinishes:`인쇄 작업 완료`,printJobFinishesDesc:`인쇄 작업이 성공적으로 완료될 때 알림 받기.`,printErrors:`인쇄 오류`,printErrorsDesc:`인쇄 작업이 실패하거나 오류가 발생할 때 알림 받기.`,printJobStops:`인쇄 작업 중지`,printJobStopsDesc:`인쇄 작업이 취소되거나 중지될 때 알림 받기.`,saveSuccess:`알림 환경 설정이 저장되었습니다.`,saveError:`알림 환경 설정 저장 실패.`}},richTextEditor:{bold:`굵게`,italic:`기울임`,underline:`밑줄`,bulletList:`글머리 기호 목록`,numberedList:`번호 목록`,alignLeft:`왼쪽 정렬`,alignCenter:`가운데 정렬`,alignRight:`오른쪽 정렬`,addLink:`링크 추가`,removeLink:`링크 제거`},externalLinks:{title:`사이드바 링크`,sidebarLayout:`사이드바`,sidebarLayoutDescription:`기본 제공 페이지를 표시하거나 숨기고, 외부 링크를 추가하고, 항목을 드래그하여 사이드바 탐색 순서를 변경하세요.`,systemPages:`Bambuddy 페이지`,externalLinks:`외부 링크`,visibleInSidebar:`사이드바에 표시`,hiddenFromSidebar:`사이드바에서 숨김`,requiredInSidebar:`사이드바에 필수`,hidePage:`페이지 숨기기`,showPage:`페이지 표시`,settingsCannotBeHidden:`설정은 숨길 수 없습니다`,noLinksConfigured:`구성된 외부 링크 없음`,deleteLink:`링크 삭제`,removeCustomIcon:`사용자 지정 아이콘 제거`,openInNewTab:`새 탭에서 열기`,placeholders:{linkName:`내 링크`}},keyboardShortcuts:{title:`키보드 단축키`,navigation:`탐색`,archivesSection:`아카이브`,kProfilesSection:`K-프로필`,generalSection:`일반`,shortcuts:{goToPrinters:`프린터로 이동`,goToArchives:`아카이브로 이동`,goToQueue:`대기열로 이동`,goToStats:`통계로 이동`,goToProfiles:`클라우드 프로필로 이동`,goToSettings:`설정으로 이동`,focusSearch:`검색 포커스`,openUploadModal:`업로드 모달 열기`,clearSelection:`선택 초기화 / 입력 포커스 해제`,contextMenu:`카드 컨텍스트 메뉴`,refreshProfiles:`프로필 새로고침`,newProfile:`새 프로필`,exitSelectionMode:`선택 모드 종료`,showHelp:`이 도움말 표시`},footer:`Esc를 누르거나 외부를 클릭하여 닫기`},notificationLog:{title:`알림 로그`,events:{printStarted:`인쇄 시작됨`,printComplete:`인쇄 완료`,printFailed:`인쇄 실패`,printStopped:`인쇄 중지됨`,progress:`진행률`,printerOffline:`프린터 오프라인`,printerError:`프린터 오류`,lowFilament:`필라멘트 부족`,maintenanceDue:`유지 관리 필요`,test:`테스트`},timeAgo:{justNow:`방금`,minutesAgo:`{{minutes}}분 전`,hoursAgo:`{{hours}}시간 전`}},restoreBackup:{title:`백업 복원`,restoring:`복원 중...`,restoreComplete:`복원 완료`,restoreFailed:`복원 실패`,importSettings:`백업 파일에서 설정 가져오기`,pleaseWait:`데이터가 복원되는 동안 기다려 주세요`,clickToSelect:`백업 파일 클릭하여 선택 (.json 또는 .zip)`,howDuplicateHandling:`중복 처리 방법:`,categories:{printers:`프린터`,smartPlugs:`스마트 플러그`,notificationProviders:`알림 제공자`,filaments:`필라멘트`,archives:`아카이브`,pendingUploads:`대기 중인 업로드`,settingsTemplates:`설정 및 템플릿`},matchingInfo:{printers:`일련번호로 일치`,smartPlugs:`IP 주소로 일치`,notificationProviders:`이름으로 일치`,filaments:`이름 + 유형 + 브랜드로 일치`,archives:`콘텐츠 해시로 일치`,pendingUploads:`파일 이름으로 일치`,settingsTemplates:`항상 덮어씀`},replaceExisting:`기존 데이터 교체`,keepExisting:`기존 데이터 유지`,replaceDescription:`백업 데이터로 이미 존재하는 항목 덮어쓰기`,keepDescription:`아직 존재하지 않는 항목만 복원`,caution:`주의:`,cautionText:`덮어쓰기는 현재 구성을 백업 데이터로 교체합니다. 보안상 프린터 액세스 코드는 절대 덮어쓰지 않습니다.`,itemsRestored:`복원된 항목`,itemsSkipped:`건너뛴 항목`,restored:`복원됨`,skipped:`건너뜀 (이미 존재)`,filesLabel:`파일 (3MF, 썸네일 등)`,newApiKeysGenerated:`새 API 키 생성됨`,newApiKeysWarning:`이 키는 한 번만 표시됩니다. 지금 복사하세요!`,processingBackup:`백업 파일 처리 중...`,noDataFound:`백업 파일에서 복원할 데이터를 찾을 수 없습니다.`,failedToRestore:`백업 복원 실패. 파일 형식을 확인하세요.`},backupExport:{title:`백업 내보내기`,selectData:`포함할 데이터 선택`,selectAll:`모두 선택`,selectNone:`선택 없음`,categoryDescriptions:{settings:`언어, 테마, 업데이트 환경 설정`,notifications:`ntfy, Pushover, Discord 등`,templates:`사용자 지정 메시지 템플릿`,smartPlugs:`Tasmota 플러그 구성`,externalLinks:`외부 서비스에 대한 사이드바 링크`,printers:`프린터 정보 (액세스 코드 제외)`,plateDetection:`빈 플레이트 기준 이미지`,filaments:`필라멘트 유형 및 비용`,maintenance:`사용자 지정 유지 관리 일정`,archives:`모든 인쇄 데이터 + 파일 (3MF, 썸네일, 사진)`,projects:`프로젝트, BOM 항목 및 첨부 파일`,pendingUploads:`검토 대기 중인 가상 프린터 업로드`,apiKeys:`Webhook API 키 (가져오기 시 새 키 생성)`},requiresPrinters:`프린터 선택 필요`,zipFileWarning:`ZIP 파일이 생성됩니다.`,zipFileDescription:`모든 3MF 파일, 썸네일, 타임랩스 및 사진을 포함합니다. 시간이 걸리고 파일이 커질 수 있습니다.`,includeAccessCodes:`액세스 코드 포함`,includeAccessCodesDescription:`다른 기기로 전송하는 경우`,includeAccessCodesWarning:`액세스 코드가 평문으로 포함됩니다. 이 백업 파일을 안전하게 보관하세요!`,categoriesSelected:`{{selectedCount}}개 카테고리 선택됨`},pendingUploads:{placeholders:{notes:`이 인쇄에 대한 메모 추가...`},discardUpload:`업로드 삭제`,archiveAllUploads:`모든 업로드 아카이브`,discardAllUploads:`모든 업로드 삭제`,archive:`아카이브`,timeAgo:{justNow:`방금`,minutesAgo:`{{minutes}}분 전`,hoursAgo:`{{hours}}시간 전`,daysAgo:`{{days}}일 전`}},apiBrowser:{placeholders:{requestBody:`JSON 요청 본문...`,searchEndpoints:`엔드포인트 검색...`}},configureAmsSlot:{title:`AMS 슬롯 구성`,slotConfigured:`슬롯 구성됨!`,configuringSlot:`슬롯 구성 중:`,slotLabel:`{{ams}} 슬롯 {{slot}}`,searchPresets:`프리셋 검색...`,colorPlaceholder:`색상 이름 또는 16진수 (예: brown, FF8800)`,clearCustomColor:`사용자 지정 색상 초기화`,noCloudPresets:`클라우드 프리셋 없음. Bambu 클라우드에 로그인하여 동기화하세요.`,noPresetsAvailable:`사용 가능한 프리셋 없음. Bambu 클라우드에 로그인하거나 로컬 프로필을 가져오세요.`,noMatchingPresets:`일치하는 프리셋을 찾을 수 없습니다.`,custom:`사용자 지정`,builtin:`기본 제공`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`설정이 프린터로 전송됨`,filamentProfile:`필라멘트 프로필`,kProfileLabel:`K 프로필 (압력 전진)`,filteringFor:`필터링 중: {{material}}`,noKProfile:`K 프로필 없음 (기본값 0.020 사용)`,noMatchingKProfiles:`일치하는 K 프로필을 찾을 수 없습니다. 기본값 K=0.020이 사용됩니다.`,otherKProfiles:`이 프린터의 다른 K 프로필`,selectFilamentFirst:`먼저 필라멘트 프로필을 선택하세요`,kFromCalibration:`K={{value}} (프린터 보정에서)`,customColorLabel:`사용자 지정 색상 (선택사항)`,presetColors:`{{name}} 색상:`,showLessColors:`색상 간략히 보기`,showMoreColors:`더 많은 색상 보기`,clear:`초기화`,hexLabel:`16진수: #{{hex}}`,resetting:`초기화 중...`,resetSlot:`슬롯 초기화`,cancel:`취소`,configuring:`구성 중...`,configureSlot:`슬롯 구성`},githubBackup:{title:`Git 백업`,history:`기록`,downloadBackup:`백업 다운로드`,restoreBackup:`백업 복원`,noBackupsYet:`아직 백업 없음`},emailSettings:{placeholders:{fromName:`Bambuddy`}},tagManagement:{searchTags:`태그 검색...`,renameTag:`태그 이름 바꾸기`,deleteTag:`태그 삭제`},notificationTemplates:{placeholders:{title:`알림 제목...`,body:`알림 본문...`}},batchTag:{placeholders:{newTag:`새 태그 입력...`}},photoGallery:{deletePhoto:`사진 삭제`},filamentHoverCard:{copySpoolUuid:`스풀 UUID 복사`},kProfilesView:{hasNote:`메모 있음`,copyProfile:`프로필 복사`},layout:{openMenu:`메뉴 열기`,noPermissionSystemInfo:`시스템 정보를 볼 권한이 없습니다`},dashboard:{dragToReorder:`드래그하여 순서 변경`,hideWidget:`위젯 숨기기`},notificationProviderCard:{deleteNotificationProvider:`알림 제공자 삭제`},fileManagerModal:{closeFileManager:`파일 관리자 닫기`,sortFiles:`파일 정렬`,goToParentFolder:`상위 폴더로 이동`,threeView:`3D 보기`},embeddedCameraViewer:{refreshStream:`스트림 새로고침`,close:`닫기`,zoomOut:`축소`,resetZoom:`배율 초기화`,zoomIn:`확대`,dragToResize:`드래그하여 크기 조정`},timelapseViewer:{skipBack5s:`5초 뒤로`,skipForward5s:`5초 앞으로`},notificationProviders:{descriptions:{email:`SMTP 이메일 알림`,telegram:`Telegram 봇을 통한 알림`,discord:`Webhook을 통해 Discord 채널로 전송`,ntfy:`무료, 자체 호스팅 가능한 푸시 알림`,pushover:`간단하고 신뢰할 수 있는 푸시 알림`,callmebot:`CallMeBot을 통한 무료 WhatsApp 알림`,webhook:`모든 URL에 일반 HTTP POST`}},logViewer:{searchPlaceholder:`메시지 또는 로거 이름 검색...`,noLogEntries:`로그 항목을 찾을 수 없음`},switchbarPopover:{noSwitchesInSwitchbar:`스위치바에 스위치 없음`},projectPageModal:{placeholders:{title:`제목`,designer:`디자이너`,license:`라이선스`,description:`설명 입력...`,profileTitle:`프로필 제목`,profileDescription:`프로필 설명...`}},SpoolmanSettings:{},time:{unknown:`-`,waiting:`대기 중`,justNow:`방금`,now:`지금`,minsAgo:`{{count}}분 전`,inMins:`{{count}}분 후`,hoursAgo:`{{count}}시간 전`,inHours:`{{count}}시간 후`,daysAgo:`{{count}}일 전`,inDays:`{{count}}일 후`},spoolbuddy:{nav:{dashboard:`대시보드`,ams:`AMS`,inventory:`재고`,writeTag:`태그 쓰기`,settings:`설정`},status:{nfcReady:`NFC 준비됨`,nfcOff:`NFC 꺼짐`,offline:`오프라인`,online:`온라인`,noPrinters:`프린터 없음`,deviceOffline:`장치 오프라인`,waitingConnection:`장치 연결 대기 중...`,systemReady:`시스템 준비됨`,status:`상태`},dashboard:{readyToScan:`스캔 준비됨`,idleMessage:`스풀을 저울에 올려 식별하세요`,nfcHint:`NFC 태그가 자동으로 읽힙니다`,device:`장치`,syncWeight:`무게 동기화`,weightSynced:`동기화됨!`,unknownTag:`알 수 없는 태그`,newTag:`새 태그 감지됨`,onScale:`저울 위`,linkSpool:`스풀에 연결`,linkTagTitle:`태그를 스풀에 연결`,linkTag:`태그 연결`,selectSpool:`이 태그를 연결할 스풀 선택:`,noUntagged:`태그 없는 스풀을 찾을 수 없음`,tagDetected:`태그 감지됨`,noTag:`태그 없음`,tagId:`태그`,grossWeight:`총 무게`,spoolSize:`스풀 크기`,close:`닫기`,currentSpool:`현재 스풀`,plateReady:`플레이트 준비됨: {{name}}`,plateReadyLabel:`초기화할 플레이트`,plateClearAction:`초기화`,plateClearedToast:`플레이트가 초기화됨으로 표시됨`,plateClearFailed:`플레이트를 초기화됨으로 표시할 수 없음`},modal:{spoolDetected:`스풀 감지됨`,assignToAms:`AMS에 할당`,syncWeight:`무게 동기화`,weightSynced:`동기화됨!`,syncing:`동기화 중...`,newTagDetected:`새 태그 감지됨`,addToInventory:`재고에 추가`,assignToAmsTitle:`AMS에 할당`,selectSlot:`슬롯 선택`,assign:`할당`,assigning:`할당 중...`,assignSuccess:`할당됨!`,assignPendingInsert:`할당됨. 스풀을 삽입하면 슬롯이 구성됩니다.`,assignError:`스풀 할당 실패. 다시 시도하세요.`,noPrinterSelected:`프린터 선택...`,noAmsDetected:`이 프린터에서 AMS가 감지되지 않음`,slot:`슬롯`},weight:{noReading:`읽기 없음`,stable:`안정됨`,measuring:`측정 중...`,tare:`영점 조정`,calibrate:`보정`},spool:{remaining:`남은 양`,material:`재료`,brand:`브랜드`,color:`색상`,coreWeight:`코어`,labelWeight:`라벨`,scaleWeight:`저울`,netWeight:`순 무게`,lastUsed:`마지막 사용`,unknownColor:`알 수 없는 색상`},ams:{noData:`AMS가 감지되지 않음`,connectAms:`필라멘트 슬롯을 보려면 AMS를 연결하세요`,noPrinter:`선택된 프린터 없음`,selectPrinter:`상단 표시줄에서 프린터를 선택하세요`,printerDisconnected:`프린터 연결 끊김`,humidity:`습도`,level:`레벨`,active:`활성`,slot:`슬롯`,empty:`비어 있음`},inventory:{search:`스풀 검색...`,empty:`재고에 스풀 없음`,noResults:`일치하는 스풀 없음`,spools:`스풀`,addSpool:`스풀 추가`},settings:{tabDevice:`장치`,tabDisplay:`화면`,tabScale:`저울`,tabUpdates:`업데이트`,nfcReader:`NFC 리더`,type:`유형`,connection:`연결`,notConnected:`N/A`,deviceInfo:`장치 정보`,hostname:`호스트`,uptime:`가동 시간`,systemConfig:`백엔드 및 인증`,backendUrl:`Bambuddy 백엔드 URL`,apiToken:`API 토큰`,apiTokenPlaceholder:`API 토큰 입력`,saveConfig:`구성 저장`,systemQueued:`구성 대기 중.`,nfcDiagnostic:`NFC 진단`,scaleDiagnostic:`저울 진단`,readTagDiagnostic:`태그 읽기 진단`,testNfc:`리더 테스트`,testScale:`정확도 테스트`,testReadTag:`태그 읽기`,systemFieldsRequired:`백엔드 URL이 필요합니다.`,brightness:`밝기`,saved:`저장됨`,noBacklight:`DSI 백라이트가 감지되지 않음. 밝기 제어는 DSI 디스플레이가 필요합니다.`,screenBlank:`화면 꺼짐 대기 시간`,screenBlankDesc:`비활성 후 화면이 꺼집니다. 터치하여 깨우세요.`,displayNote:`밝기는 소프트웨어 필터로 적용됩니다.`,scaleCalibration:`저울 보정`,currentWeight:`현재 무게`,tareOffset:`영점`,calFactor:`계수`,knownWeight:`알려진 무게`,calStep1:`저울에서 모든 물건을 제거하고 영점 설정을 누르세요.`,calStep2:`저울에 알려진 무게를 올리세요.`,setZero:`영점 설정`,calibrateNow:`보정`,calibrated:`보정됨`,tareSet:`영점 조정 명령 전송됨. 장치 대기 중...`,tareComplete:`영점 조정 완료!`,tareTimedOut:`영점 조정 시간 초과 — SpoolBuddy 데몬이 실행 중인가요?`,tareFailed:`영점 조정 명령 전송 실패`,zeroSet:`영점이 설정됨. 저울에 알려진 무게를 올리세요.`,calibrationDone:`보정 완료!`,calibrationFailed:`보정 실패`,lastCalibrated:`마지막 보정`,stable:`안정됨`,settling:`안정화 중...`,firmware:`펌웨어`,scale:`저울`,noDevice:`SpoolBuddy 장치를 찾을 수 없음`,daemonVersion:`데몬 버전`,currentVersion:`현재`,versionPending:`데몬 대기 중...`,checking:`확인 중...`,checkUpdates:`업데이트 확인`,updateAvailable:`업데이트 사용 가능`,updateInstructions:`SSH를 통해 업데이트: SpoolBuddy 설치 스크립트를 실행하여 업그레이드하세요.`,upToDate:`최신 버전`,includeBeta:`베타 버전 포함`},writeTag:{tabExisting:`기존 스풀`,tabNew:`새 스풀`,tabReplace:`태그 교체`,searchPlaceholder:`재료, 색상, 브랜드로 검색...`,noUntaggedSpools:`태그 없는 스풀 없음`,noTaggedSpools:`태그 있는 스풀 없음`,selectSpool:`스풀을 선택한 후 빈 NTAG를 리더에 올려놓으세요`,placeTag:`NTAG를 리더에 올려놓으세요`,tagReady:`태그 감지됨 — 쓰기 준비됨`,writeTag:`태그 쓰기`,replaceTag:`태그 교체`,writing:`태그 쓰는 중...`,waiting:`SpoolBuddy 대기 중...`,writeSuccess:`태그 성공적으로 쓰여짐!`,writeFailed:`쓰기 실패`,queueFailed:`쓰기 명령 대기 실패`,tryAgain:`다시 시도`,cancel:`취소`,replaceWarning:`이전 태그가 연결 해제됩니다. 새 태그가 교체합니다.`,deviceOffline:`SpoolBuddy가 오프라인입니다`,material:`재료`,colorName:`색상 이름`,color:`색상`,brand:`브랜드`,weight:`무게 (g)`,createSpool:`스풀 생성`,creating:`생성 중...`,spoolCreated:`스풀 생성됨! 쓰기 준비됨.`,createFailed:`스풀 생성 실패`,incompleteDataWarning:`불완전한 Spoolman 데이터로 태그 쓰여짐`},quickMenu:{printerPower:`프린터 전원`,systemControls:`시스템`,restartDaemon:`데몬 재시작`,restartBrowser:`브라우저 재시작`,reboot:`재부팅`,shutdown:`종료`,swipeToClose:`아래로 스와이프하여 닫기`,confirmTitle:`확인`,confirmShutdown:`SpoolBuddy를 종료하시겠습니까? 다시 켜려면 물리적 접근이 필요합니다.`,confirmReboot:`SpoolBuddy를 재부팅하시겠습니까?`,confirmRestartDaemon:`SpoolBuddy 데몬을 재시작하시겠습니까? NFC와 저울이 일시적으로 사용 불가능합니다.`,confirmRestartBrowser:`키오스크 브라우저를 재시작하시겠습니까? 화면이 잠시 꺼집니다.`,confirm:`확인`,confirmPlugOn:`{{name}}을(를) 켜시겠습니까?`,confirmPlugOff:`{{name}}을(를) 끄시겠습니까?`,turnOn:`켜기`,turnOff:`끄기`}},bugReport:{title:`버그 신고`,description:`설명`,descriptionPlaceholder:`무엇이 잘못되었나요? 문제를 설명해 주세요...`,email:`이메일 (선택사항)`,emailPlaceholder:`your@email.com`,emailPrivacy:`제공하면 이메일이 GitHub 이슈의 접힌 섹션에 포함되어 관리자가 후속 조치를 취할 수 있습니다.`,screenshot:`스크린샷`,uploadOrPaste:`이미지 업로드, 붙여넣기 또는 드래그`,dataCollectedSummary:`보고서에 포함되는 데이터는?`,dataIncluded:`포함됨:`,dataIncludedList:`앱 버전, OS, 아키텍처, Python 버전, 데이터베이스 통계(개수만), 프린터 모델, 노즐 개수, 펌웨어 버전, 연결 상태, 통합 상태(Spoolman, MQTT, HA), 비민감 설정, 네트워크 인터페이스 수, Docker 세부 정보, 의존성 버전.`,dataNeverIncluded:`절대 포함되지 않음:`,dataNeverIncludedList:`프린터 이름, 일련 번호, 액세스 코드, 비밀번호, IP 주소, 이메일 주소, API 키, 토큰, Webhook URL, 호스트 이름 또는 사용자 이름.`,submit:`제출`,startLogging:`디버그 로깅 시작`,stepEnableLogging:`디버그 로깅 활성화됨`,stepReproduce:`이제 문제를 재현하세요`,stepStopLogging:`중지 후 보고서 제출`,stopAndSubmit:`중지 후 제출`,maxDuration:`{{minutes}}분 후 자동 중지`,stoppingLogs:`로그 수집 및 제출 중...`,submitting:`버그 보고서 제출 중...`,submitSuccess:`버그 보고서가 성공적으로 제출되었습니다!`,submitFailed:`버그 보고서 제출 실패`,thankYou:`감사합니다!`,submitted:`버그 보고서가 제출되었습니다.`,viewIssue:`이슈 보기`,closeKeepsRecording:`문제를 재현하는 동안 이 패널을 닫아도 됩니다. 기록은 계속되며 다시 열면 이 단계로 돌아옵니다.`,resumeRecording:`버그 리포트 기록 중 — {{elapsed}}. 클릭하여 완료하세요.`,resumeReport:`리포트 계속하기`,unexpectedError:`예상치 못한 오류가 발생했습니다`,submittingStepConnection:`프린터 연결 확인 실행 중`,submittingStepVirtualPrinters:`가상 프린터 설정 확인 실행 중`,submittingStepLogScan:`알려진 문제가 있는지 최근 로그 스캔 중`,submittingStepSubmit:`GitHub에 보고서 제출 중`,diagnosticChecking:`프린터 연결 확인 중...`,diagnosticHealthy:`연결 확인 통과 — 프린터에서 문제가 발견되지 않았습니다.`,diagnosticSummary:`{{total}}개 프린터 중 {{problems}}개에서 연결 문제가 있습니다`,diagnosticIntro:`하나 이상의 프린터에 연결 문제가 있어 현재 문제의 원인일 수 있습니다. 아래에서 프린터를 펼쳐 수정 방법을 확인하세요 — 해결하면 버그 보고서 없이 문제가 해결될 수 있습니다. 아래에서 보고서를 제출할 수도 있습니다.`,logHealthSummary:`로그에서 알려진 문제가 발견되었습니다`,logHealthIntro:`최근 로그가 알려진 문제와 일치합니다. 아래 수정 방법을 확인하세요 — 해결하면 버그 보고서 없이 문제가 해결될 수 있습니다. 아래에서 보고서를 제출할 수도 있습니다.`},failureDetection:{title:`AI 실패 감지`,description:`자체 호스팅 Obico ML API로 인쇄를 모니터링하고 감지된 실패에 자동으로 조치합니다.`,mlUrl:`Obico ML API URL`,mlUrlHint:`자체 호스팅 Obico ml_api 컨테이너의 기본 URL (예: http://192.168.1.10:3333).`,mlToken:`ML API 토큰 (선택 사항)`,mlTokenPlaceholder:`서버가 ML_API_TOKEN 없이 실행 중이면 비워 두세요`,mlTokenHint:`Obico ml_api 컨테이너의 ML_API_TOKEN 환경 변수와 일치해야 합니다. 컨테이너가 토큰 없이 실행 중이면 비워 두세요.`,test:`테스트`,testSuccess:`ML API에 도달 가능하며 정상입니다.`,testSuccessTokenUnknown:`ML API에 도달 가능하며 정상입니다. 토큰은 확인할 수 없었습니다.`,testFailed:`ML API에 도달할 수 없습니다.`,sensitivity:`민감도`,sensitivityLow:`낮음 (오탐 적음)`,sensitivityMedium:`중간 (균형)`,sensitivityHigh:`높음 (조기 감지, 오탐 많음)`,sensitivityHint:`경고 및 실패를 트리거하는 신뢰도 임계값을 조정합니다.`,action:`감지된 실패에 대한 조치`,actionNotify:`알림만`,actionPause:`인쇄 일시 중지`,actionPauseOff:`일시 중지 후 전원 끄기`,pollInterval:`폴링 간격 (초)`,pollIntervalHint:`인쇄 중 각 프린터를 확인하는 빈도. 최소 5초, 최대 120초.`,externalUrlMissing:`외부 URL이 설정되지 않았습니다.`,externalUrlHint:`ML API가 URL을 통해 카메라 스냅샷을 가져옵니다. ML API 컨테이너가 Bambuddy에 도달할 수 있도록 일반 설정에서 외부 URL을 설정하세요.`,perPrinterTitle:`모니터링되는 프린터`,perPrinterHint:`감지 서비스가 감시할 프린터를 선택하세요.`,monitorAll:`연결된 모든 프린터 모니터링`,statusTitle:`상태`,serviceRunning:`서비스 실행 중`,thresholds:`낮음 / 높음 임계값`,activePrinters:`활성 인쇄물`,noActivePrints:`현재 실행 중인 인쇄물 없음.`,historyTitle:`최근 감지`,noHistory:`아직 감지 없음.`},makerworld:{title:`MakerWorld`,description:`MakerWorld 모델 URL을 붙여넣어 Bambu Handy 앱을 떠나지 않고 Bambuddy에서 직접 가져오고 인쇄하세요.`,pasteUrlHeader:`MakerWorld에서 가져오기`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… 또는 MakerWorld 링크 붙여넣기`,resolveButton:`확인`,signInRequiredTitle:`다운로드하려면 Bambu 클라우드 로그인 필요`,signInRequiredBody:`익명으로 모델 세부 정보를 탐색할 수 있지만 MakerWorld는 3MF 파일을 다운로드하려면 Bambu 클라우드 계정이 필요합니다.`,signInExpiredTitle:`Bambu 클라우드 로그인이 만료되었습니다`,signInExpiredBody:`Bambuddy에는 여전히 로그인되어 있지만 Bambu Lab이 저장된 토큰을 더 이상 허용하지 않아 다운로드가 실패합니다. Bambu 클라우드에 다시 로그인하세요.`,openCloudSettings:`클라우드 설정 열기`,untitledModel:`제목 없는 모델`,byCreator:`{{name}} 제작`,downloadsCount:`{{count}}회 다운로드`,licensePrefix:`라이선스`,alreadyImported:`이미 라이브러리에 있음`,openOnMakerworld:`MakerWorld에서 열기`,alreadyInLibrary:`이 모델이 이미 라이브러리에 있습니다 — 파일 관리자 → MakerWorld에서 찾으세요`,importSuccess:`{{filename}} 가져옴 — 파일 관리자 → MakerWorld에 저장됨`,platesHeader:`플레이트 ({{count}})`,plateDefaultName:`플레이트 {{n}}`,materialCount:`{{count}}개 필라멘트`,amsRequired:`AMS 필요`,slicedFor:`{{printer}}용으로 슬라이싱됨`,alsoCompatible:`호환 가능으로도 표시됨: {{printers}}`,importToLibrary:`저장`,sliceIn:`{{slicer}}에서 저장 및 슬라이싱`,disclaimer:`MakerWorld 통합은 커뮤니티가 문서화한 API 엔드포인트를 사용합니다. Bambuddy는 MakerWorld 또는 Bambu Lab과 제휴하거나 이들의 승인을 받지 않았습니다.`,lastImportSuccess:`라이브러리에 가져옴`,lastImportAlreadyInLibrary:`이미 라이브러리에 있음`,viewInLibrary:`파일 관리자에서 보기`,openInBambuStudio:`Bambu Studio에서 열기`,openInOrcaSlicer:`OrcaSlicer에서 열기`,importTo:`파일 관리자로 가져오기`,recentImportsHeader:`최근 가져오기`,phaseResolving:`확인 중`,phaseDownloading:`다운로드 중`,folderAuto:`MakerWorld (기본값)`,importAll:`모두 가져오기`,importAllProgress:`{{total}}개 중 {{current}}개 가져오는 중`,openGallery:`이미지 갤러리 열기`,galleryPrev:`이전 이미지`,galleryNext:`다음 이미지`,deleteImport:`라이브러리에서 제거`,importDeleting:`제거 중…`,importDeleted:`라이브러리에서 제거됨`,confirmDelete:`라이브러리에서 {{filename}}을(를) 제거하시겠습니까? 로컬 파일이 삭제되지만 MakerWorld에서 다시 가져올 수 있습니다.`,errors:{resolveFailed:`MakerWorld URL을 확인할 수 없습니다.`,downloadFailed:`다운로드 실패. 다시 시도하세요.`,deleteFailed:`라이브러리에서 파일을 제거할 수 없습니다.`}},gcodeViewer:{filamentSlot:`필라멘트 {{n}}`,loading:`툴패스를 읽는 중…`,loadFailed:`이 파일의 G코드를 불러올 수 없습니다.`,showTravel:`이동 경로`,topLayer:`최상단 레이어`,bottomLayer:`최하단 레이어`,noSource:`미리 볼 파일이 지정되지 않았습니다.`,view:{filament:`필라멘트`,feature:`유형`,height:`높이`,width:`너비`},feature:{wall:`벽`,sparseInfill:`성긴 채움`,solidInfill:`솔리드 채움`,bridge:`브리지 / 오버행`,support:`서포트`,skirt:`스커트 / 브림`,gapFill:`틈 채움`,ironing:`다림질`,primeTower:`프라임 타워`},back:`뒤로`,backToArchives:`인쇄 아카이브로 돌아가기`,backToFiles:`파일 관리자로 돌아가기`,plates:`플레이트`,plateN:`플레이트 {{n}}`},libraryTrash:{title:`휴지통`,headerButton:`휴지통`,headerTooltip:`휴지통으로 이동된 파일 보기`,backToFiles:`파일 관리자로 돌아가기`,subtitleAdmin:`삭제된 파일은 {{days}}일 동안 여기에 보관된 후 자동 삭제됩니다. 이 보기는 모든 사용자의 휴지통 파일을 표시합니다.`,subtitleUser:`삭제된 파일은 {{days}}일 동안 여기에 보관된 후 자동 삭제됩니다.`,loading:`휴지통 불러오는 중…`,loadError:`휴지통을 불러올 수 없습니다.`,empty:`휴지통이 비어 있습니다.`,summary:`{{count}}개 파일 · {{size}}`,emptyTrash:`휴지통 비우기`,restore:`복원`,purgeNow:`지금 삭제`,autoPurgeIn:`{{when}} 후 자동 삭제`,days:`일`,retentionLabel:`자동 삭제 기간`,selectAll:`모두 선택`,selectOne:`{{filename}} 선택`,selectionCount:`{{count}}개 선택됨`,bulkRestore:`선택 항목 복원`,bulkPurge:`선택 항목 삭제`,col:{filename:`파일`,folder:`폴더`,size:`크기`,deleted:`휴지통 이동일`,autoPurge:`자동 삭제일`,owner:`소유자`,actions:`작업`},confirm:{purgeTitle:`영구 삭제?`,purgeBody:`{{filename}}이(가) 디스크에서 삭제되며 복원할 수 없습니다.`,emptyTitle:`휴지통을 비우시겠습니까?`,emptyBody:`{{count}}개의 모든 파일이 디스크에서 삭제됩니다. 이 작업은 취소할 수 없습니다.`,bulkPurgeTitle:`선택한 파일을 영구 삭제하시겠습니까?`,bulkPurgeBody:`선택한 {{count}}개 파일이 디스크에서 삭제되며 복원할 수 없습니다.`,cta:`영구 삭제`},toast:{restored:`파일이 복원되었습니다.`,restoreFailed:`파일을 복원할 수 없습니다.`,purged:`파일이 영구 삭제되었습니다.`,purgeFailed:`파일을 삭제할 수 없습니다.`,emptied:`휴지통에서 {{count}}개 파일이 삭제되었습니다.`,emptyFailed:`휴지통을 비울 수 없습니다.`,retentionSaved:`자동 삭제가 {{days}}일로 설정되었습니다.`,retentionFailed:`보존 설정을 저장할 수 없습니다.`,bulkRestored:`{{count}}개 파일이 복원되었습니다.`,bulkPurged:`{{count}}개 파일이 삭제되었습니다.`}},libraryPurge:{title:`오래된 파일 삭제`,headerButton:`오래된 파일 삭제`,headerTooltip:`오래된 파일을 휴지통으로 일괄 이동`,description:`라이브러리에서 오래된 파일을 한 번에 정리합니다. 인쇄 기록이 있는 파일은 마지막 인쇄 날짜 기준으로, 한 번도 인쇄되지 않은 파일은 업로드 날짜 기준으로 계산됩니다.`,ageLabel:`다음보다 오래된 파일 이동`,days:`일`,includeNeverPrinted:`한 번도 인쇄되지 않은 파일 포함`,effectsTitle:`삭제 클릭 시 일어나는 일`,effect1:`일치하는 파일이 휴지통으로 이동됩니다 — 디스크에서 아직 삭제되지 않습니다.`,effect2:`보존 기간이 만료되기 전까지 언제든 휴지통에서 복원할 수 있습니다.`,effect3:`보존 기간 후 휴지통 청소기가 디스크에서 영구적으로 제거합니다.`,effect4:`외부(연결된) 폴더의 파일은 건너뜁니다 — Bambuddy는 자신이 소유하지 않은 바이트는 절대 삭제하지 않습니다.`,previewLoading:`일치하는 파일 수 확인 중…`,previewFailed:`삭제 미리보기를 불러올 수 없습니다.`,previewSummary:`{{count}}개 파일 · {{size}}이(가) 휴지통으로 이동됩니다`,andMore:`…및 {{count}}개 더`,warning:`휴지통 파일은 보존 기간이 만료될 때까지 저장 공간을 차지합니다. 즉시 디스크를 확보하려면 나중에 휴지통을 비우세요.`,confirmCta:`{{count}}개를 휴지통으로 이동`,purging:`휴지통으로 이동 중…`,toast:{success:`{{count}}개 파일을 휴지통으로 이동했습니다.`,failed:`파일을 삭제할 수 없습니다.`}},libraryAutoPurge:{enableLabel:`오래된 파일 자동 삭제`,enableDescription:`매일 한 번 관리자 삭제를 실행합니다. 파일이 먼저 휴지통으로 이동됩니다 — 즉시 삭제되지 않습니다.`,ageLabel:`다음보다 오래된 파일 자동 삭제`,ageDescription:`최소 7일, 최대 10년. 수동 삭제 버튼과 같은 날짜 규칙을 사용합니다.`,days:`일`,includeNeverPrinted:`한 번도 인쇄되지 않은 파일 포함`,saveFailed:`자동 삭제 설정을 저장할 수 없습니다.`},archivePurge:{headerButton:`오래된 것 삭제`,headerTooltip:`오래된 아카이브 일괄 삭제`,title:`오래된 아카이브 삭제`,description:`오래된 인쇄 기록을 정리합니다. 각 아카이브는 가장 최근 인쇄 완료 시점 기준으로 계산됩니다 — 아카이브를 다시 인쇄하면 날짜가 새로고침되므로 활성 작업은 절대 삭제되지 않습니다.`,ageLabel:`다음 기간 동안 인쇄되지 않은 아카이브 삭제`,days:`일`,effectsTitle:`삭제 클릭 시 일어나는 일`,effect1:`일치하는 각 아카이브가 데이터베이스에서 영구적으로 제거됩니다.`,effect2:`3MF, 썸네일, 타임랩스, 소스 3MF, F3D 디자인 파일 및 사진 폴더가 모두 디스크에서 삭제됩니다.`,effect3:`아카이브에 대한 휴지통이 없습니다 — 삭제는 즉각적이며 취소할 수 없습니다.`,effect4:`아카이브를 다시 인쇄하면 날짜 카운터가 초기화되므로 여전히 사용하는 아카이브는 안전합니다.`,previewLoading:`일치하는 아카이브 수 확인 중…`,previewFailed:`삭제 미리보기를 불러올 수 없습니다.`,previewSummary:`{{count}}개 아카이브 · {{size}}이(가) 삭제됩니다`,andMore:`…및 {{count}}개 더`,warning:`영구적입니다. 계속하기 전에 보관하고 싶은 것을 다운로드하거나 즐겨찾기에 추가하세요.`,confirmCta:`{{count}}개 아카이브 삭제`,purging:`삭제 중…`,toast:{success:`{{count}}개 아카이브가 삭제되었습니다.`,failed:`아카이브를 삭제할 수 없습니다.`},purgeStatsLabel:`통계에서도 제거`,purgeStatsHint:`일치하는 아카이브를 빠른 통계(필라멘트, 시간, 비용, 에너지)에서 삭제합니다. 이 옵션 없이는 빠른 통계는 모든 기여를 유지하고 파일만 디스크에서 제거됩니다.`},archiveAutoPurge:{enableLabel:`오래된 아카이브 자동 삭제`,enableDescription:`매일 한 번, 임계값 내에 인쇄되지 않은 아카이브를 영구적으로 삭제합니다. 아카이브를 다시 인쇄하면 카운터가 초기화됩니다. 휴지통 없음 — 삭제는 즉각적입니다.`,ageLabel:`다음 기간 동안 인쇄되지 않은 아카이브 자동 삭제`,ageDescription:`최소 7일, 최대 10년. 가장 최근 인쇄 완료 시점 기준 — 아카이브를 다시 인쇄하면 날짜가 새로고침됩니다. 아카이브, 3MF, 썸네일, 타임랩스 및 사진을 삭제합니다.`,days:`일`,runNow:`지금 아카이브 삭제`,saveFailed:`자동 삭제 설정을 저장할 수 없습니다.`,purgeStatsLabel:`통계에서도 제거`,purgeStatsDescription:`활성화되면 일일 정리 작업도 각 삭제된 아카이브를 빠른 통계(필라멘트, 시간, 비용, 에너지)에서 제거합니다. 기본값 비활성화 — 빠른 통계는 기여를 유지하고 파일만 디스크에서 제거됩니다.`},cameraTokens:{scope:{camera_stream:`카메라 스트림`,camwall:`카메라 월`,overlay:`스트리밍 오버레이`},title:`카메라 API 토큰`,navTitle:`카메라 API 토큰`,description:`Home Assistant, Frigate, 키오스크 화면 등 안정적인 주소가 필요한 도구에 카메라 스트림을 삽입하기 위한 장기 토큰입니다. 범위는 생성할 때 선택하며, 토큰은 언제든지 취소할 수 있습니다.`,loading:`불러오는 중…`,confirmRevoke:{title:`이 토큰을 취소하시겠습니까?`,body:`"{{name}}"을(를) 사용하는 모든 장치가 즉시 접근을 잃습니다. 이 작업은 취소할 수 없습니다.`,cancel:`취소`,confirm:`취소`},create:{scopeLabel:`범위`,hintCameraStream:`카메라 스트림 토큰은 카메라 스트림과 스냅숏만 가져올 수 있습니다. Home Assistant, Frigate 등 카메라 하나를 삽입하는 용도로 사용하세요.`,hintCamWall:`카메라 월 토큰은 로그인 없이 화면에서 /camwall을 엽니다. 모든 프린터의 이름과 상태, 카메라 스트림을 볼 수 있습니다. 파일 이름, 주소, 액세스 코드는 볼 수 없습니다.`,hintOverlay:`스트리밍 오버레이 토큰은 로그인 없이 화면에서 /overlay/{printerId}을 엽니다 — OBS나 모든 라이브 방송용입니다. 프린터 한 대의 카메라 스트림과 화면에 표시되는 파일 이름을 포함한 실시간 인쇄 상태를 볼 수 있습니다. 주소나 액세스 코드는 볼 수 없습니다.`,title:`새 토큰 만들기`,nameLabel:`토큰 이름`,namePlaceholder:`예: Home Assistant`,daysLabel:`만료까지 일 수`,submit:`만들기`,hint:`최대 수명은 365일입니다. 토큰 값은 생성 시 한 번만 표시됩니다 — 지금 복사하세요.`},created:{camWallUrlTitle:`이 화면용 카메라 월 주소`,camWallUrlHint:`이 주소를 화면에서 여세요. 주소를 읽을 수 있는 사람은 누구나 월을 볼 수 있으므로 열쇠처럼 다루세요. 토큰을 취소하면 해당 화면의 접근이 차단됩니다.`,overlayUrlTitle:`OBS용 오버레이 주소`,overlayUrlHint:`OBS에서 이것을 브라우저 소스로 추가하세요. /overlay/1의 숫자를 프린터의 번호(프린터 페이지의 주소에 표시됨)로 변경하세요. 주소를 읽을 수 있는 사람은 누구나 스트림을 볼 수 있으므로 열쇠처럼 다루세요 — 접근을 차단하려면 토큰을 취소하세요.`,title:`토큰 생성됨 — 지금 복사하세요`,warning:`이 토큰은 이 번만 볼 수 있습니다. 이 대화상자를 닫으면 다시는 볼 수 없습니다.`,copy:`복사`,dismiss:`저장했습니다`},list:{scope:`범위`,myTitle:`내 토큰`,allTitle:`모든 사용자 (관리자 보기)`,empty:`아직 토큰 없음.`,name:`이름`,owner:`소유자`,prefix:`접두사`,created:`생성일`,expires:`만료일`,lastUsed:`마지막 사용`,revoke:`취소`,expired:`만료됨`},toast:{created:`토큰 생성됨`,createFailed:`토큰 생성 실패`,revoked:`토큰 취소됨`,revokeFailed:`토큰 취소 실패`,loadFailed:`토큰 불러오기 실패`,copied:`클립보드에 복사됨`,copyFailed:`복사 실패 — 수동으로 선택하여 복사하세요`}},forecast:{title:`예측`,noSpools:`활성 스풀을 찾을 수 없습니다. 예측 데이터를 보려면 재고에 스풀을 추가하세요.`,noUsageData:`사용 데이터를 사용할 수 없습니다 — 재고 타임라인을 예측할 수 없습니다.`,sku:`SKU`,material:`재료`,stock:`재고`,dailyRate:`소비율`,daysLeft:`남은 일수`,emptyBy:`소진 예정일`,reorderBy:`재주문 기한`,actions:`작업`,trend:`추세`,estimated:`추정`,noData:`데이터 없음`,timeframe:`기간`,chartTitle:`예상 재고 — 상위 5개 재료`,dashedLinesROP:`점선 = 재주문 시점`,stockLevel:`재고 수준`,reorderPoint:`재주문 시점`,safetyMargin:`안전 마진`,trendLegend:`추세 (기록 기반, 95% 서비스 수준)`,estimatedLegend:`추정 (무게 변화)`,noDataLegend:`데이터 없음`,ropLabel:`ROP`,ssLabel:`SS`,safetyStockLegend:`안전 재고`,stockArrivalLegend:`재고 입고`,stockoutLegend:`재고 소진`,alertCount_one:`{{count}}개 알림`,alertCount_other:`{{count}}개 알림`,order:`주문`,save:`저장`,cancel:`취소`,settingsSaved:`설정 저장됨`,failedSaveSettings:`설정 저장 실패`,globalLeadTimeSaved:`전역 리드 타임 저장됨`,globalLeadTime:`전역 리드 타임`,globalLeadTimeHint:`전역 리드 타임 하한값 — 모든 SKU의 재주문 시점 계산에 사용됨`,skuLeadTimeOverride:`SKU 리드 타임 재정의`,skuLeadTimeHint:`0 = 전역 리드 타임 사용. 이 SKU에 대해 재정의하려면 >0으로 설정.`,safetyMarginLabel:`안전 마진`,effectiveLeadTime:`유효 리드 타임`,effectiveLeadTimeHint:`max(전역 {{global}}일, SKU {{sku}}일)`,reorderPointHint:`d̄ × LT + 안전 마진 — 재고가 이 수준에 도달하면 주문`,safetyMarginHint:`통계적 안전 재고 (z=1.65 × σ × √LT) + 사용자 정의 버퍼`,safetyMarginHintDays:`통계적 안전 재고 위에 추가되는 버퍼.{{approx}}`,safetyMarginHintDaysApprox:` ≈ 현재 소비율로 {{g}}g.`,safetyMarginHintG:`통계적 안전 재고 위에 추가되는 고정 무게 버퍼.{{approx}}`,safetyMarginHintGApprox:` ≈ 현재 소비율로 {{days}}일.`,individualSpools:`개별 스풀`,labelWeight:`라벨`,spoolCount_one:`스풀 {{count}}개`,spoolCount_other:`스풀 {{count}}개`,stockBreakRisk:`재고 소진 위험`,stockBreakDetail:`{{days}}일 남음, 리드 타임 {{lt}}일.`,stockBreakBefore:`보충 전 재고 소진`,reorderNow:`지금 재주문`,reorderTriggerPassed:`트리거 날짜 {{date}}가 지났습니다.`,shoppingList:`쇼핑 목록`,shoppingListItems_one:`({{count}}개 항목)`,shoppingListItems_other:`({{count}}개 항목)`,shoppingListEmpty:`쇼핑 목록이 비어 있습니다. 항목을 추가하려면 행의 장바구니 아이콘을 클릭하세요.`,addToCart:`쇼핑 목록에 추가`,alertsSnoozed:`이 SKU의 알림 음소거`,alertsEnabled:`이 SKU의 알림 음소거 해제`,addedToCart:`쇼핑 목록에 추가됨`,failedAddItem:`항목 추가 실패`,listView:`목록`,logisticsView:`물류`,qty:`수량`,weight:`무게`,leadTime:`리드 타임`,expectedRestock:`예상 재입고`,status:`상태`,note:`메모`,pending:`대기 중`,purchased:`구매됨`,received:`수령됨`,markPurchased:`구매됨으로 표시`,markReceived:`수령됨으로 표시 — 재고에 스풀 추가`,resetToPending:`대기 중으로 초기화`,remove:`제거`,clearAll:`모두 초기화`,downloadCsv:`CSV`,addToCartTitle:`쇼핑 목록에 추가`,byQuantity:`수량 기준`,byDuration:`기간 기준`,numberOfSpools:`스풀 수`,lastHowManyDays:`몇 일 동안 지속되어야 합니까?`,noUsageQty:`사용 데이터 없음 — 수량을 1로 설정합니다.`,noteOptional:`메모 (선택사항)`,notePlaceholder:`예: 프로젝트 X용, 긴급…`,addNSpools_one:`스풀 {{count}}개 추가`,addNSpools_other:`스풀 {{count}}개 추가`,onArrival:`입고 시`,stockBreakIn:`{{days}}일 후 재고 소진.`,stockRunsOutBefore:`{{lt}}일 리드 타임이 경과하기 전에 재고가 소진됩니다.`,atRate:`{{rate}}g/일 소비율로`,moreSpools_one:`스풀 {{count}}개 더`,moreSpools_other:`스풀 {{count}}개 더`,bridgeGap:`격차를 메우기 위해 필요합니다.`,noReadAccess:`재고 예측을 볼 권한이 없습니다.`,noWriteAccess:`예측 설정을 수정할 권한이 없습니다.`},diagnostic:{modalTitle:`연결 진단 — {{name}}`,running:`진단 실행 중...`,runningElapsed:`진단 실행 중... ({{elapsed}}초)`,waitingForReportHint:`프린터가 상태 보고를 게시하기를 기다리는 중 — 최대 {{max}}초 걸릴 수 있습니다.`,runFailed:`진단 실행 실패: {{error}}`,retry:`다시 실행`,runButton:`진단 실행`,sectionTitle:`연결 진단`,sectionDescription:`프린터가 연결되지 않거나 인쇄되지 않는 이유를 확인합니다 — 포트 연결 가능 여부, LAN 개발자 모드, Docker 네트워크 모드, 자격증명.`,noPrinters:`구성된 프린터가 없습니다.`,overall:{ok:`문제가 발견되지 않았습니다 — 프린터 연결이 정상입니다.`,warnings:`프린터가 작동하지만 일부 항목에 주의가 필요합니다.`,problems:`프린터가 연결되지 않거나 인쇄되지 않는 원인이 되는 문제가 발견되었습니다.`},check:{port_mqtt:{title:`제어 포트 (MQTT 8883)`,pass:`연결 가능 — 프린터가 제어 연결을 수락하고 있습니다.`,fail:`포트 8883에 연결할 수 없습니다. 프린터가 꺼져 있거나, IP 주소가 다르거나, 방화벽이 차단하고 있습니다. 프린터 IP를 확인하고 포트 8883이 차단되지 않았는지 확인하세요.`},port_ftps:{title:`파일 전송 포트 (FTPS 990)`,pass:`연결 가능 — 인쇄 파일 전송이 작동합니다.`,warn:`포트 990에 연결할 수 없습니다. 모니터링은 작동할 수 있지만 프린터로 파일 전송에 실패합니다. 포트 990이 차단되지 않았는지 확인하세요.`,warn_no_tls:`포트 990은 열려 있지만 프린터의 파일 서비스가 TLS 핸드셰이크를 완료하지 못합니다. 인쇄 파일, 미리보기, 타임랩스를 가져올 수 없어 아카이브가 비어 있게 됩니다. 프린터를 재시작하세요 — 포트 차단을 해제해도 해결되지 않습니다.`},external_storage:{title:`전송된 파일을 외부 저장소에 저장 (설치 단계 4)`,pass:`프린터가 이 옵션이 켜져 있다고 보고합니다 — 전송된 파일이 SD 카드에 저장되며 아카이브에 썸네일과 슬라이서 메타데이터가 포함됩니다.`,fail:`프린터가 이 옵션이 꺼져 있다고 보고합니다. "전송된 파일을 외부 저장소에 저장"을 활성화하세요 — 최신 펌웨어 (P2S 01.02 / Bambu Studio 2.6 이상)에서는 프린터의 인쇄 설정에 토글이 있고, 이전 버전에서는 Bambu Studio / OrcaSlicer의 장치 탭에 있습니다. 이 옵션이 없으면 아카이브된 모든 인쇄물에 썸네일과 슬라이서 메타데이터가 없습니다.`,skip:`확인되지 않음 — 활성 MQTT 연결이 필요합니다. 이 설정이 슬라이서에만 존재하는 이전 슬라이서에서는 프린터가 보고하지 않으므로, 옵션이 꺼져 있어도 이 검사는 통과합니다 — 설치 단계 4를 수동으로 확인하세요.`,skip_unsupported_model:`이 모델에는 SD 슬롯이 있지만 옵션을 켤 방법이 없습니다 — 현재 P1 시리즈 펌웨어는 Bambu Studio에 토글을 표시하지 않으며 프린터에 화면도 없습니다. 여기서 고칠 것은 없습니다. Bambu Lab이 펌웨어로 지원할 때까지 보관된 출력물에는 썸네일과 슬라이서 메타데이터가 없을 수 있습니다.`,fail_no_media:`옵션은 켜져 있지만 프린터 슬롯에 카드도 USB도 감지되지 않아 보낸 파일이 갈 곳이 없습니다. 하나 넣고 다시 출력하세요. 그전까지는 보관되는 모든 출력물에 썸네일과 슬라이서 메타데이터가 없습니다.`,warn_internal_storage:`옵션이 켜져 있고 저장소도 있지만 마지막 출력물은 Bambuddy가 읽을 수 없는 프린터 내부 저장소에 저장되었습니다. H2 시리즈, P2S, X2D에서는 이 설정과 관계없이 Bambu Studio의 «인쇄» 버튼이 항상 그쪽으로 보냅니다. 출력물은 이름과 시간과 함께 보관되지만 썸네일과 슬라이서 메타데이터는 없습니다. 완전한 기록을 남기려면 Bambuddy에서 출력을 시작하거나, OrcaSlicer로 슬라이싱하거나, Bambu Studio에서 «보내기»로 «외부 저장소»를 고른 뒤 출력을 시작하세요.`,warn_internal_history:`옵션은 켜져 있고 저장소도 있지만, 마지막 출력은 이미 프린터에 있던 파일에서 실행되었습니다 — 화면에서의 재출력, Handy에서의 시작, 또는 이전에 보낸 파일입니다. 그 라이브러리는 Bambuddy가 읽을 수 없는 내부 저장소에 있으며, 그 출력에서는 아무것도 전송되지 않았으므로 어떤 설정으로도 바뀌지 않습니다. 이름과 시간과 함께 보관되기는 하지만 썸네일과 슬라이서 메타데이터는 없습니다. 온전한 보관을 원하면 Bambuddy에서 출력을 시작하거나 슬라이서에서 전송하세요.`},port_rtsps:{title:`카메라 포트 ({{protocol}} {{port}})`,pass:`연결 가능 — 카메라 스트림이 작동합니다.`,warn:`포트 {{port}}에 연결할 수 없습니다. 라이브 카메라 보기가 작동하지 않습니다. 인쇄에는 영향을 주지 않습니다.`},macos_local_network:{title:`macOS 로컬 네트워크 권한`,pass:`macOS가 Bambuddy의 로컬 네트워크 접근을 허용하고 있습니다.`,warn_unsigned:`Bambuddy를 실행하는 Python에 코드 서명이 없어 macOS가 로컬 네트워크 권한을 연결할 대상을 찾지 못하고, 프린터로 향하는 모든 연결을 오류도 확인 창도 없이 조용히 차단합니다. 서명을 수행하는 Bambuddy 업데이트 스크립트(install/update_macos.sh)를 실행한 다음 Bambuddy를 재시작하십시오. 인터프리터: {{executable}}`,warn_permission:`프린터가 켜져 있고 이 주소로 연결할 수 있다면 시스템 설정 > 개인 정보 보호 및 보안 > 로컬 네트워크를 열어 Bambuddy의 Python이 활성화되어 있는지 확인하십시오. 활성화되어 있지 않으면 macOS는 로컬 연결을 조용히 차단하며, Python을 업데이트하면 이전 권한이 남지 않을 수 있습니다.`},network_mode:{title:`컨테이너 네트워크 모드`,genericRuntime:`컨테이너`,pass:`{{runtime}}에서 호스트 네트워크로 실행 중입니다.`,warn:`Bambuddy가 {{runtime}}에서 브리지 네트워크로 실행 중입니다. 프린터 검색과 가상 프린터에는 호스트 네트워크가 필요합니다 — 호스트 네트워크로 컨테이너를 재생성하세요(docker-compose에서는 "network_mode: host", Podman에서는 "--network=host").`,skip:`컨테이너에서 실행 중이 아닙니다 — 해당 없음.`,skip_unknown:`Bambuddy가 {{runtime}}에서 실행 중이지만 네트워크 모드를 확인할 수 없습니다. 프린터 검색이나 가상 프린터가 작동하지 않으면 호스트 네트워크로 컨테이너를 재생성하세요.`,skip_system_container:`Bambuddy가 {{runtime}} 시스템 컨테이너에서 실행 중이며, 가상 머신처럼 LAN에 연결되어 있습니다 — 해당 없음.`},subnet:{title:`네트워크 서브넷`,pass:`프린터와 Bambuddy가 같은 서브넷에 있습니다.`,warn:`프린터({{printer_ip}})와 Bambuddy({{host_ip}})가 다른 서브넷에 있습니다. 서브넷 간 라우팅이 구성되어 있지 않으면 서로 연결하지 못할 수 있습니다.`,skip:`서브넷을 확인할 수 없어 건너뜁니다.`},mqtt_auth:{title:`프린터 자격증명`,pass:`프린터가 연결을 수락했습니다.`,fail:`프린터에 도달할 수 있지만 Bambuddy가 연결되지 않았습니다. 액세스 코드 또는 시리얼 번호가 잘못됐을 가능성이 높습니다 — LAN 전용 모드나 개발자 모드를 토글할 때마다 액세스 코드가 변경되므로 프린터 화면에서 다시 복사하세요. 재부팅 중이거나 이미 동시 연결 한도에 도달한 프린터도 똑같이 보입니다.`,fail_auth_rejected:`프린터가 Bambuddy의 자격증명을 거부했습니다. 액세스 코드 또는 시리얼 번호가 잘못됐습니다 — LAN 전용 모드나 개발자 모드를 토글할 때마다 액세스 코드가 변경됩니다. 프린터 화면에서 다시 복사한 뒤 프린터 설정에 저장하세요.`,skip:`확인하지 않음 — 프린터에 연결할 수 없었습니다.`},developer_mode:{title:`LAN 개발자 모드`,pass:`개발자 모드가 활성화되어 있습니다.`,fail:`프린터에서 개발자 모드가 꺼져 있습니다. 프린터의 LAN 설정에서 활성화하고 확인을 누르세요. 이 없으면 인쇄가 시작되지 않습니다.`,skip:`확인할 수 없음 — 프린터에 연결되어 있어야 합니다.`},printer_publishing:{title:`프린터가 상태를 게시 중`,pass:`프린터가 상태 업데이트를 게시하고 있습니다 — AMS, 필라멘트, K-프로파일이 슬라이서에 올바르게 반영됩니다.`,fail:`MQTT 브로커는 연결을 수락했지만 프린터가 상태 보고를 게시하지 않았습니다. 거의 항상 시리얼 번호가 잘못되었거나 대소문자가 일치하지 않아서 발생합니다 — device/<serial>/report 토픽은 대소문자를 구분합니다. 프린터 설정의 시리얼 번호를 프린터 화면 표시와 비교해 확인하세요.`,skip:`확인할 수 없음 — 프린터에 연결되어 있어야 합니다.`}}},systemHealth:{sectionTitle:`시스템 상태`,sectionDescription:`최근 로그에서 지원 티켓이 되기 전에 직접 해결할 수 있는 알려진 문제를 스캔합니다.`,rescan:`다시 스캔`,clean:`최근 {{times}}개 로그 항목에서 알려진 문제가 발견되지 않았습니다.`,logUnavailable:`파일 로깅이 비활성화되어 로그를 스캔할 수 없습니다. 이 확인을 사용하려면 파일 로깅을 활성화하세요.`,learnMore:`수정 방법`,fixLabel:`수정:`,occurrences:`{{times}}회 발견 — 마지막: {{lastSeen}}`,category:{layer8:`직접 해결 가능`,environment:`환경`,bug:`버그 보고 바람`},signature:{"ftp-auth-rejected":{name:`프린터가 액세스 코드를 거부함`,cause:`프린터가 파일 전송 로그인을 거부했습니다. 액세스 코드가 잘못됐거나 개발자 모드를 토글한 후 변경됐습니다.`,fix:`프린터 화면(LAN 설정)에서 액세스 코드를 다시 복사하여 Bambuddy의 프린터 설정에서 업데이트하세요.`},"ftp-connection-timeout":{name:`파일 전송 연결 시간 초과`,cause:`Bambuddy가 프린터의 파일 전송 포트(FTPS 990)에 연결할 수 없었습니다. 포트가 차단됐거나 프린터가 꺼져 있거나 다른 서브넷에 있습니다.`,fix:`Bambuddy와 프린터 사이에서 포트 990을 차단하는 것이 없는지 확인하고, 같은 네트워크에 있는지 확인하세요.`},"ftp-ssl-error":{name:`보안 파일 전송 핸드셰이크 실패`,cause:`프린터의 파일 서비스가 990 포트에서 TLS 없이 응답했습니다. 프린터 쪽 파일 서버가 멈춘 상태이며 방화벽이나 펌웨어 문제가 아닙니다.`,fix:`프린터를 재시작하세요. 그때까지 인쇄 파일, 커버 이미지, 타임랩스를 가져올 수 없지만 인쇄 자체에는 영향이 없습니다.`},"bambu-cloud-captcha":{name:`Bambu Cloud가 CAPTCHA를 요구합니다`,cause:`Bambu의 남용 방지 계층이 이 네트워크를 확인하고 있어 Bambu Cloud 로그인을 완료할 수 없습니다. 계정이나 이 설치 환경이 아니라 공용 IP 주소에 연결된 문제입니다.`,fix:`기다리세요. 보통 몇 시간 안에 해제되며 로그인을 반복하면 더 길어집니다. 그동안에는 브라우저 세션에서 가져온 액세스 토큰으로 로그인하세요.`},"mqtt-connection-flapping":{name:`프린터 연결이 계속 끊김`,cause:`제어 연결(MQTT 8883)이 반복적으로 끊어지고 다시 연결됩니다 — 주로 불안정한 네트워크 경로나 부분적으로 차단된 포트가 원인입니다.`,fix:`프린터의 Wi-Fi 신호를 확인하고, 유선 연결을 권장하며, 포트 8883이 안정적으로 연결 가능한지 확인하세요.`},"camera-connection-refused":{name:`카메라 스트림 연결 불가`,cause:`포트 RTSPS 322에서 라이브 카메라에 연결할 수 없었습니다. 포트가 차단됐거나 프린터에서 카메라 또는 LAN 라이브뷰가 꺼져 있습니다.`,fix:`프린터에서 카메라와 LAN 라이브뷰를 활성화하고 포트 322가 차단되지 않았는지 확인하세요. 인쇄에는 영향을 주지 않습니다.`},"database-locked":{name:`데이터베이스 쓰기 경합`,cause:`SQLite 데이터베이스에 부하 시 "database is locked" 오류가 발생합니다 — 여러 프린터를 동시에 실행할 때 흔한 문제입니다.`,fix:`Bambuddy를 외부 PostgreSQL 데이터베이스로 전환하세요. 설명서의 PostgreSQL 가이드를 참고하세요.`}}},vpDiagnostic:{title:`설정 확인 — {{name}}`,runButton:`설정 확인 실행`,running:`설정 확인 실행 중...`,runFailed:`설정 확인을 실행할 수 없습니다: {{error}}`,retry:`다시 실행`,overall:{ok:`모든 확인이 통과됐습니다 — 이 가상 프린터가 올바르게 설정되었습니다.`,warnings:`가상 프린터가 작동하지만 일부 항목에 주의가 필요합니다.`,problems:`슬라이서가 이 가상 프린터를 인식하거나 사용할 수 없는 원인이 되는 문제가 발견되었습니다.`},check:{enabled:{title:`가상 프린터 활성화`,fail:`이 가상 프린터가 꺼져 있습니다. 검색 가능하게 하려면 켜세요.`},running:{title:`서비스 실행 중`,fail:`가상 프린터가 활성화됐지만 서비스가 실행 중이 아닙니다. Bambuddy 로그를 확인하세요 — 바인드 IP 충돌이나 권한 오류가 보통 원인입니다.`},bind_interface:{title:`바인드 네트워크 인터페이스`,fail:`바인드 인터페이스가 설정되지 않았거나 이 호스트에 더 이상 존재하지 않습니다. 바인드 인터페이스 드롭다운에서 현재 인터페이스를 선택하세요.`},access_code:{title:`액세스 코드 설정됨`,fail:`액세스 코드가 설정되지 않았습니다. 슬라이서에는 여기에 설정한 것과 동일한 8자리 액세스 코드가 필요합니다.`},target_printer:{title:`대상 프린터`,fail:`대상 프린터가 선택되지 않았습니다. 프록시 모드에는 실제 프린터가 필요합니다.`,warn:`대상 프린터가 현재 오프라인입니다 — 재연결되면 프록시가 재개됩니다.`},port_ftps:{title:`파일 업로드 서비스 (포트 {{port}})`,fail:`바인드 IP의 포트 {{port}}에서 수신 중인 서비스가 없어 슬라이서가 파일을 업로드할 수 없습니다. 이 인터페이스의 포트 충돌이 일반적인 원인입니다.`},port_mqtt:{title:`제어 서비스 (포트 {{port}})`,fail:`바인드 IP의 포트 {{port}}에서 수신 중인 서비스가 없어 슬라이서가 연결하거나 상태를 표시할 수 없습니다.`},port_bind:{title:`검색 서비스 (포트 {{port}})`,fail:`바인드 IP의 포트 {{port}}에서 수신 중인 서비스가 없어 슬라이서의 검색 핸드셰이크가 실패합니다.`},privileged_ports:{title:`특권 포트 바인딩`,fail:`포트 {{port}}은(는) 1024 미만이며 이 서비스에는 바인딩 권한이 없습니다. 위에서 아무것도 수신 대기하지 않는 이유입니다. /etc/systemd/system/bambuddy.service에 AmbientCapabilities=CAP_NET_BIND_SERVICE를 추가하고 재시작하거나 "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))"를 실행하세요. Docker에서는 cap_add: [NET_BIND_SERVICE]를 추가합니다.`},certificate:{title:`TLS 인증서`,pass:`인증서가 준비됐습니다. Bambuddy CA 인증서(위)가 슬라이서의 신뢰 저장소에 가져와져 있는지 확인하세요.`,fail:`이 가상 프린터의 TLS 인증서가 없습니다. Bambuddy 데이터 디렉터리가 쓰기 가능한지 확인하세요.`}}}}},"pt-BR":{translation:{nav:{printers:`Impressoras`,archives:`Arquivos`,queue:`Fila de impressão`,stats:`Estatísticas`,profiles:`Perfis`,maintenance:`Manutenção`,projects:`Projetos`,inventory:`Inventário`,finance:`Finanças`,files:`Gerenciador de Arquivos`,makerworld:`MakerWorld`,notifications:`Notificações`,settings:`Configurações`,system:`Sistema`,collapseSidebar:`Recolher barra lateral`,expandSidebar:`Expandir barra lateral`,update:`Atualizar`,updateAvailable:`Atualização disponível: v{{version}}`,updateAvailableBanner:`Versão {{version}} está disponível!`,viewUpdate:`Ver atualização`,viewOnGithub:`Ver no GitHub`,keyboardShortcuts:`Atalhos de teclado (?)`,switchToLight:`Mudar para modo claro`,switchToDark:`Mudar para modo escuro`,switchToSystem:`Mudar para modo do sistema`,smartSwitches:`Interruptores inteligentes`,logout:`Sair`,installApp:`Instalar app`,installAppSuccess:`Bambuddy foi instalado`},common:{plusNMore:`+{{count}} outros`,save:`Salvar`,saving:`Salvando...`,cancel:`Cancelar`,delete:`Excluir`,edit:`Editar`,add:`Adicionar`,close:`Fechar`,confirm:`Confirmar`,loading:`Carregando...`,error:`Erro`,errorLoading:`Erro ao carregar`,retry:`Tentar novamente`,success:`Sucesso`,warning:`Aviso`,enabled:`Ativado`,disabled:`Desativado`,yes:`Sim`,no:`Não`,on:`Ligado`,off:`Desligado`,all:`Todos`,none:`Nenhum`,search:`Pesquisar`,filter:`Filtrar`,sort:`Ordenar`,refresh:`Atualizar`,download:`Baixar`,upload:`Enviar`,uploading:`Enviando...`,uploadFailed:`Falha no envio`,actions:`Ações`,status:`Status`,name:`Nome`,description:`Descrição`,date:`Data`,time:`Hora`,hours:`Horas`,minutes:`Minutos`,seconds:`Segundos`,days:`Dias`,enable:`Ativar`,disable:`Desativar`,permissions:`Permissões`,noPrinters:`Nenhuma impressora configurada`,noData:`Nenhum dado disponível`,linkNotFound:`Link não encontrado`,required:`Obrigatório`,optional:`Opcional`,dismiss:`Dispensar`,apply:`Aplicar`,reset:`Redefinir`,export:`Exportar`,import:`Importar`,clear:`Limpar`,selectAll:`Selecionar tudo`,deselectAll:`Desmarcar tudo`,noChange:`— Sem alterações —`,unchanged:`Inalterado`,unassigned:`Não atribuído`,unknown:`Desconhecido`,unknownError:`Erro desconhecido`,today:`Hoje`,tomorrow:`Amanhã`,asap:`O mais rápido possível`,overdue:`Atrasado`,now:`Agora`,collapse:`Recolher`,expand:`Expandir`,previous:`Anterior`,next:`Próximo`,viewArchive:`Ver arquivo`,viewInFileManager:`Ver no Gerenciador de Arquivos`,addedBy:`Adicionado por {{username}}`,prints:`impressões`,more:`+{{count}} mais`,ascending:`Crescente`,descending:`Decrescente`,back:`Voltar`,copy:`Copiar`,copied:`Copiado!`,printer:`Impressora`,remove:`Remover`,type:`Tipo`,print:`Imprimir`,rename:`Renomear`,move:`Mover`,create:`Criar`,duplicate:`Duplicar`,left:`Esquerda`,right:`Direita`,user:`Usuário`,run:`Executar`,running:`Executando...`},finance:{allTypes:`Todos os tipos`,allCostCenters:`Todos os centros de custo`,title:`Finanças`,subtitle:`Carteira, transações pessoais e centros de custo`,noAccess:`Você não tem permissão para visualizar dados financeiros.`,personalView:`Visualização pessoal`,adminView:`Visualização do administrador`,createCostCenter:`Criar centro de custo`,adjustWallet:`Ajustar carteira`,addManualPrint:`Adicionar impressão manual`,manageMembers:`Gerenciar membros do centro de custo`,currentBalance:`Saldo pessoal`,transactions:`Transações`,personalTransactions:`Transações pessoais`,costCenters:`Centros de custo`,availableForPrinting:`Disponível para atribuição de impressão`,costCenterName:`Nome`,budgetType:`Tipo de orçamento`,monthlyBudget:`Orçamento mensal`,totalBudget:`Orçamento total`,noBudget:`Sem orçamento`,create:`Criar`,selectUser:`Selecionar usuário`,transactionType:`Tipo`,amount:`Valor`,noCostCenter:`Sem centro de custo`,descriptionOptional:`Descrição (opcional)`,applyAdjustment:`Aplicar ajuste`,memberCanPrint:`Membro pode imprimir`,addMember:`Adicionar membro`,canPrint:`Pode imprimir`,noMembers:`Nenhum membro atribuído.`,editCostCenter:`Editar centro de custo`,myCostCenters:`Meus centros de custo`,costCentersHint:`Revise os limites de orçamento e mantenha os custos sob controle`,noCostCenters:`Nenhum centro de custo encontrado.`,owner:`Proprietário`,balance:`Saldo da conta`,unlimited:`Ilimitado`,budgetPolicyHint:`Os saldos das contas registram os custos. A impressão é limitada apenas pelo orçamento do centro de custo selecionado; sem orçamento, é ilimitada.`,budget:`Orçamento`,shared:`Compartilhado`,cannotEditPrivateCostCenter:`Centros de custo privados não podem ser editados aqui`,recentTransactions:`Transações recentes`,transactionsHint:`Filtre por tipo e centro de custo`,first:`Primeira`,prev:`Anterior`,next:`Próxima`,last:`Última`,pageNumberOf:`Página {{page}} de {{total}}`,noTransactions:`Nenhuma transação disponível.`,noTransactionsForFilter:`Nenhuma transação corresponde aos filtros selecionados.`,costCenter:`Centro de custo`,balanceAfter:`Saldo após`,userWithId:`Usuário #{{id}}`,partial:`Parcial`,editTransaction:`Editar transação`,selectCostCenter:`Selecionar centro de custo...`,costCenterRequired:`Por favor, selecione um centro de custo`,amountExample:`ex.: 4,00`,manualAdjustmentExample:`ex.: Ajuste manual`,userRequired:`Por favor, selecione um usuário`,amountInvalid:`O valor deve ser um número válido`,createdCostCenter:`Centro de custo criado`,createCostCenterFailed:`Falha ao criar o centro de custo`,transactionDeleted:`Transação excluída`,deleteTransactionFailed:`Falha ao excluir a transação`,transactionEdited:`Transação atualizada e razão recalculada`,editTransactionFailed:`Falha ao editar a transação`,manualPrintCreated:`Cobrança de impressão manual adicionada e razão recalculada`,manualPrintFailed:`Falha ao criar a impressão manual`,memberSaved:`Membro salvo`,memberSaveFailed:`Falha ao salvar o membro`,memberRemoved:`Membro removido`,memberRemoveFailed:`Falha ao remover o membro`,costCenterNameRequired:`O nome do centro de custo é obrigatório`,costCenterUpdated:`Centro de custo atualizado`,costCenterUpdateFailed:`Falha ao atualizar o centro de custo`,confirmDeleteCostCenter:`Excluir o centro de custo "{{name}}"?`,costCenterDeleted:`Centro de custo excluído`,costCenterDeleteFailed:`Falha ao excluir o centro de custo`,deleteTransactionConfirm:`Excluir essa transação? Os saldos serão recalculados automaticamente.`,deposit:`Depósito`,withdraw:`Saque`,printCharge:`Cobrança de impressão`,deleteTransaction:`Excluir transação`},printers:{addPreflight:{checking:`Verificando a conexão...`,warning:`Algumas verificações de conexão falharam. Esta impressora pode aparecer como offline. Revise as verificações abaixo, corrija o que puder ou salve mesmo assim.`,back:`Voltar`,saveAnyway:`Salvar mesmo assim`},title:`Impressoras`,addPrinter:`Adicionar Impressora`,editPrinter:`Editar Impressora`,deletePrinter:`Excluir Impressora`,printerName:`Nome da Impressora`,serialNumber:`Número de Série`,ipAddress:`Endereço IP / Nome do Host`,accessCode:`Código de Acesso`,model:`Modelo`,nozzleCount:`Número de Bicos`,autoArchive:`Arquivamento Automático`,status:{available:`Disponível`,idle:`Ocioso`,printing:`Imprimindo`,paused:`Pausado`,offline:`Offline`,problem:`Problema`,error:`Erro`,finished:`Concluído`,unknown:`Desconhecido`},temperatures:{nozzle:`Bico`,bed:`Cama`,chamber:`Câmara`},heaterHistory:{title:`Histórico de aquecedores`,openLabel:`Ver histórico de aquecedores`,nozzle:`Bico`,nozzle2:`Bico 2`,bed:`Cama`,chamber:`Câmara`,error:`Falha ao carregar histórico`,empty:`Nenhum dado registrado ainda`},progress:`{{percent}}% concluído`,timeRemaining:`{{time}} restante`,deleteConfirm:`Tem certeza de que deseja excluir "{{name}}"?`,maintenanceOk:`Manutenção OK`,maintenanceWarning:`{{count}} aviso`,maintenanceWarning_plural:`{{count}} avisos`,maintenanceDue:`{{count}} devido`,maintenanceDue_plural:`{{count}} devido`,sort:{name:`Nome`,status:`Status`,model:`Modelo`,location:`Localização`,eta:`Tempo restante`,ascending:`Ordem crescente`,descending:`Ordem decrescente`},cardSize:{small:`Cartões pequenos`,medium:`Cartões médios`,large:`Cartões grandes`,extraLarge:`Cartões extra grandes`},pageView:{openCamWallPage:`Abrir o mural de câmeras como página`,cards:`Cartões`,camWall:`Mural de câmeras`},camWall:{page:{tokenRejected:`Este link do mural de câmeras não é mais válido. O token pode ter expirado ou sido revogado.`,loadFailed:`Não foi possível carregar as impressoras.`},noPrinters:`Nenhuma impressora para exibir`,noSignal:`Sem sinal`,live:`Ao vivo`,snap:`Foto`,off:`Desligado`,summary:`{{live}} ao vivo, {{snap}} fotos, {{total}} no total`,layer:`Camada {{cur}}/{{total}}`,timeLeft:`faltam {{time}}`,statusMode:{off:`Desligado`,compact:`Compacto`,full:`Completo`},settings:{title:`Configurações do mural de câmeras`,maxLive:`Máx. transmissões ao vivo`,maxLiveHint:`Quantos blocos transmitem ao vivo simultaneamente. Os demais atualizam como fotos.`,snapshotInterval:`Intervalo de foto (segundos)`,snapshotIntervalHint:`Com que frequência os blocos não ao vivo buscam uma nova foto.`,statusOverlay:`Sobreposição de status`,statusOverlayHint:`Compacto: apenas o selo de status. Completo: + progresso, camada e tempo restante.`}},hideOffline:`Ocultar offline`,nextAvailable:`Próximo disponível`,powerOn:`Ligar`,offlinePrintersWithPlugs:`Impressoras offline com tomadas inteligentes`,noPrintersConfigured:`Nenhuma impressora configurada ainda`,search:`Pesquisar impressoras...`,noSearchResults:`Nenhuma impressora corresponde à sua pesquisa ou filtros`,filter:{allStatuses:`Todos os status`,allLocations:`Todos os locais`},toolbar:{filters:`Filtros`,view:`Visualização`,actions:`Ações`},readyToPrint:`Pronto para imprimir`,external:`Externo`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Excluir arquivos de impressão`,noLabel:`Sem etiqueta`,printPreview:`Pré-visualização de impressão`,width:`Largura`,height:`Altura`,noObjectsFound:`Nenhum objeto encontrado`,objectsLoadedOnPrintStart:`Objetos são carregados quando uma impressão começa`,willBeSkipped:`Será ignorado`,name:`Nome`,serialCannotBeChanged:`Número de série não pode ser alterado`,locationHelp:`Usado para agrupar impressoras e filtrar trabalhos na fila`,wifiSignal:{veryWeak:`Muito fraco`,weak:`Fraco`,fair:`Regular`,good:`Bom`,excellent:`Excelente`},maintenanceUpToDate:`Toda a manutenção está em dia - Clique para ver`,maintenance:{title:`Em manutenção`,subtitle:`Esta impressora está pausada — sem conexão, não elegível para a fila, sem enviar notificações.`,pillLabel:`Manutenção`,exitButton:`Sair da manutenção`,menuEnter:`Entrar no modo manutenção`,menuExit:`Sair do modo manutenção`,toastEntered:`{{name}} está agora em modo manutenção`,toastExited:`{{name}} está online novamente`,confirmMidPrintTitle:`Entrar em modo manutenção durante uma impressão?`,confirmMidPrintMessage:`{{name}} está imprimindo no momento. Entrar em modo manutenção desconectará o MQTT e interromperá o acompanhamento do progresso e as notificações de conclusão para este trabalho. Continuar?`,editFieldLabel:`Modo manutenção`,editFieldHelp:`Quando ativado, esta impressora é pausada do MQTT, despacho de fila e notificações — útil para reparos, instalações paralelas do Bambuddy ou suspensão temporária.`},chamberLightOn:`Ligar luz da câmara`,chamberLightOff:`Desligar luz da câmara`,files:`Arquivos`,browseFiles:`Procurar arquivos da impressora`,autoOffAfterPrint:`Desligamento automático após impressão`,autoOffExecuted:`Desligamento automático executado - ligue a impressora para reiniciar`,hmsErrors:`Erros HMS`,viewHmsErrors:`Ver {{count}} erro(s) HMS`,resume:`Retomar`,pause:`Pausar`,stop:`Parar`,camera:`âmera`,skipObject:`Ignorar objeto`,reconnect:`Reconectar`,forceRefresh:`Forçar atualização`,forceRefreshSuccess:`Atualização solicitada`,mqttDebug:`Depuração MQTT`,printerInformation:`Informações da impressora`,copyToClipboard:`Copiar`,copied:`Copiado!`,state:`Estado`,wifiSignalLabel:`Sinal WiFi`,developerMode:`Modo desenvolvedor`,enabled:`Ativado`,disabled:`Desativado`,addedOn:`Adicionada em`,sdCard:`Cartão SD`,inserted:`Inserido`,notInserted:`Não inserido`,totalPrintHours:`Horas de impressão`,activeNozzle:`Ativo: {{nozzle}} bico`,amsSwitchInletTooltip:`Comutador de trajeto de filamento IN-{{inlet}} ({{side}}) — alimenta os dois bicos`,nozzleRack:`Suporte de bicos`,nozzleDocked:`Acoplado`,nozzleMounted:`Montado`,nozzleActive:`Ativo`,nozzleIdle:`Ocioso`,nozzleDiameter:`Diâmetro`,nozzleType:`Tipo`,nozzleStatus:`Status`,nozzleFilament:`Filamento`,nozzleWear:`Desgaste`,nozzleMaxTemp:`Temp Máx`,nozzleSerial:`Número de série`,nozzleHardenedSteel:`Aço Endurecido`,nozzleStainlessSteel:`Aço Inoxidável`,nozzleTungstenCarbide:`Carboneto de Tungstênio`,nozzleFlow:`Fluxo`,nozzleHighFlow:`Alto Fluxo`,nozzleStandardFlow:`Fluxo Padrão`,firmwareUpdate:`Atualização de Firmware`,firmwareInstructions:`No visor da impressora, vá para`,firmwareNav:`Navegar para`,settings:`Configurações`,firmware:`Firmware`,discoverPrinters:`Descobrir Impressoras`,searching:`Procurando...`,manualEntry:`Entrada Manual`,addFromCloud:`Adicionar da Nuvem`,toast:{printerDeleted:`Impressora excluída`,missingSpoolAssignment:`Impressão iniciada em {{printer}}. Atribuição de bobina ausente para: {{slots}}`,killSwitchTriggered:`O bloqueio de segurança de cobrança interrompeu uma impressão não autorizada em {{printer}}: {{filename}}`,billingChargeFailed:`A cobrança de {{filename}} em {{printer}} falhou. A reserva do orçamento foi mantida; verifique os logs do servidor.`,assignmentVerified:`Filamento carregado no compartimento {{slot}} ({{printer}})`,assignmentVerifiedNoKprofile:`Compartimento {{slot}} em {{printer}} carregado, mas o perfil de calibração de fluxo (perfil K) não foi aplicado`,assignmentNotConfirmed:`Não foi possível confirmar a atribuição do compartimento {{slot}} em {{printer}} — verifique o compartimento AMS`,printerAdded:`Impressora adicionada`,printerUpdated:`Impressora atualizada`,failedToDelete:`Falha ao excluir impressora`,failedToAdd:`Falha ao adicionar impressora`,connectionFailedNotAdded:`Não foi possível conectar à impressora. Verifique o IP, o número de série e o código de acesso, e confirme que o modo somente LAN está ativado. A impressora não foi adicionada.`,failedToUpdate:`Falha ao atualizar impressora`,commandSent:`Comando enviado`,failedToSendCommand:`Falha ao enviar comando`,turnedOn:`{{name}} ligado`,failedToPowerOn:`Falha ao ligar {{name}}`,scriptTriggered:`Script acionado`,printStopped:`Impressão parada`,printPaused:`Impressão pausada`,printResumed:`Impressão retomada`,referenceDeleted:`Referência excluída`,detectionAreaSaved:`Área de detecção salva`,failedToRunScript:`Falha ao executar script`,failedToStopPrint:`Falha ao parar impressão`,failedToPausePrint:`Falha ao pausar impressão`,failedToResumePrint:`Falha ao retomar impressão`,failedToControlChamberLight:`Falha ao controlar a luz da câmara`,failedToSetSpeed:`Falha ao definir a velocidade de impressão`,failedToUpdateSetting:`Falha ao atualizar configuração`,failedToSkipObjects:`Falha ao ignorar objetos`,failedToRereadRfid:`Falha ao reler RFID`,failedToCheckPlate:`Falha ao verificar a placa`,failedToUpdateLabel:`Falha ao atualizar etiqueta`,failedToDeleteReference:`Falha ao excluir referência`,failedToSaveDetectionArea:`Falha ao salvar área de detecção`,plateCheckEnabled:`Verificação da placa ativada`,plateCheckDisabled:`Verificação da placa desativada`,calibrationSaved:`Calibração salva!`,calibrationFailed:`Falha na calibração`,rfidRereadInitiated:`Releitura de RFID iniciada`,loadInitiated:`Carregando filamento…`,unloadInitiated:`Descarregando filamento…`,failedToLoad:`Falha ao carregar filamento`,failedToUnload:`Falha ao descarregar filamento`},connection:{connected:`Conectado`,offline:`Offline`},plateStatus:{markCleared:`Marcar placa como liberada`,cleared:`Placa liberada`,notCleared:`Placa não liberada`,inUse:`Placa em uso`},queue:{inQueue:`{{count}} impressão na fila`,inQueue_plural:`{{count}} impressões na fila`},controls:`Controles`,rfid:{reread:`Releitura de RFID`},ams:{load:`Carregar`,unload:`Descarregar`,feedTitle:`Carregar {{slot}} em qual bico?`,feedPrompt:`O Filament Track Switch pode direcionar este slot para qualquer um dos hotends. Escolha qual alimentar.`,feedLeft:`Bico esquerdo`,feedRight:`Bico direito`,feedAlreadyLoaded:`Já carregado`,switchNotReady:`O Filament Track Switch ainda não foi configurado. Atribua cada AMS a uma entrada na impressora e tente novamente.`},bedJog:{limitWarning:`Os limites de curso não são aplicados durante movimentos manuais — um bug do firmware da Bambu ignora os fins de curso por software em comandos remotos. Mova com cuidado para evitar colisões.`,title:`Controles de movimento`,bed:`Mesa`,step:`Passo (mm)`,up:`Mover mesa para cima`,down:`Mover mesa para baixo`,toolheadUp:`Mover cabeçote para cima`,toolheadDown:`Mover cabeçote para baixo`,disabledWhilePrinting:`Desativado durante a impressão`,notHomedTitle:`Impressora não referenciada`,notHomedMessage:`A impressora não foi referenciada desde a última impressão. Execute a referência automática primeiro para um posicionamento seguro (estaciona o cabeçote, depois referencia X, Y e Z), ou mova assim mesmo — os fins de curso de software serão ignorados.`,homeZ:`Referência automática`,moveAnyway:`Mover assim mesmo`,homingStarted:`Referenciando impressora automaticamente…`},permission:{noAdd:`Você não tem permissão para adicionar impressoras`,noEdit:`Você não tem permissão para editar impressoras`,noDelete:`Você não tem permissão para excluir impressoras`,noControl:`Você não tem permissão para controlar impressoras`,noFiles:`Você não tem permissão para acessar arquivos de impressora`,noAmsRfid:`Você não tem permissão para reler RFID AMS`,noSmartPlugControl:`Você não tem permissão para controlar tomadas inteligentes`,noCamera:`Você não tem permissão para visualizar câmeras`},modal:{addTitle:`Adicionar Impressora`,editTitle:`Editar Impressora`,myPrinter:`Minha Impressora`,selectModel:`Selecionar modelo...`,locationGroup:`Localização / Grupo (opcional)`,locationPlaceholder:`ex.: Oficina, Escritório, Porão`,autoArchiveLabel:`Arquivar automaticamente impressões concluídas`,fromPrinterSettings:`A partir das configurações da impressora`,modelOptional:`Modelo (opcional)`,saveChanges:`Salvar alterações`},skipObjects:{tooltip:`Ignorar objetos`,onlyWhilePrinting:`Ignorar objetos (apenas durante a impressão)`,requiresMultiple:`Ignorar objetos (requer 2+ objetos)`,title:`Ignorar Objetos`,matchIdsInfo:`Correspondência de IDs com o display da sua impressora`,printerShowsIds:`A tela da impressora mostra os IDs dos objetos na placa de construção`,skipSelected:`Ignorar Selecionados`,skipping:`Ignorando...`,noObjectsSelected:`Nenhum objeto selecionado`,selectObjectsToSkip:`Selecione os objetos que deseja ignorar na impressão atual`,skipped:`Ignorado`,objectsSkipped:`Objetos ignorados`,activeCount:`{{count}} ativo`,waitForLayer:`Aguarde a camada 2+ para ignorar objetos (atualmente na camada {{layer}})`,skip:`Ignorar`,confirmTitle:`Ignorar Objeto?`,confirmMessage:`Tem certeza de que deseja ignorar "{{name}}"? Isso não pode ser desfeito.`,confirmAllMessage:`Todos os objetos restantes estão selecionados. Isso interromperá o trabalho de impressão. Continuar?`,confirmMultipleMessage:`Ignorar {{count}} objetos selecionados? Isso não pode ser desfeito.`},confirm:{deleteTitle:`Excluir Impressora`,deleteMessage:`Tem certeza de que deseja excluir "{{name}}"? Isso removerá todas as configurações de conexão.`,deleteArchivesNote:`Todo o histórico de impressão desta impressora será permanentemente excluído.`,keepArchivesNote:`O histórico de impressão será mantido, mas não estará mais associado a esta impressora.`,stopTitle:`Parar Impressão`,stopMessage:`Tem certeza de que deseja parar a impressão atual em "{{name}}"? Isso cancelará o trabalho de impressão.`,stopButton:`Parar Impressão`,pauseTitle:`Pausar Impressão`,pauseMessage:`Tem certeza de que deseja pausar a impressão atual em "{{name}}"?`,pauseButton:`Pausar Impressão`,resumeTitle:`Retomar Impressão`,resumeMessage:`Tem certeza de que deseja retomar a impressão em "{{name}}"?`,resumeButton:`Retomar Impressão`,powerOnTitle:`Ligar Impressora`,powerOnMessage:`Tem certeza de que deseja ligar a impressora "{{name}}"?`,powerOnButton:`Ligar`,powerOffTitle:`Desligar Impressora`,powerOffMessage:`Tem certeza de que deseja desligar a impressora "{{name}}"?`,powerOffWarning:`AVISO: "{{name}}" está imprimindo no momento! Tem certeza de que deseja desligar a impressora? Isso interromperá a impressão e pode danificar a impressora.`,powerOffButton:`Desligar`,haToggleTitle:`Alternar "{{name}}"`,haToggleMessage:`Alternar a entidade Home Assistant {{entity}}? Isso pode desligar a energia se estiver ligada no momento.`,haToggleWarning:`AVISO: "{{name}}" está imprimindo no momento! Alternar {{entity}} pode cortar a energia e interromper a impressão. Continuar?`,haToggleButton:`Alternar`},bulk:{select:`Selecionar`,selectAll:`Selecionar tudo`,selectByLocation:`Selecionar por local`,selected:`{{count}} selecionado(s)`,actions:{stop:`Parar`,pause:`Pausar`,resume:`Retomar`,clearPlate:`Limpar mesa`,clearHMS:`Limpar notificações`},confirm:{stopTitle:`Parar {{count}} impressões`,stopMessage:`Isso cancelará as impressões ativas em {{count}} impressora(s). Esta ação não pode ser desfeita.`,stopButton:`Parar todas`,pauseTitle:`Pausar {{count}} impressões`,pauseMessage:`Isso pausará as impressões ativas em {{count}} impressora(s).`,pauseButton:`Pausar todas`,clearPlateTitle:`Limpar {{count}} mesas de impressão`,clearPlateMessage:`Isso limpará a mesa de impressão em {{count}} impressora(s) e pode iniciar trabalhos na fila.`,clearPlateButton:`Limpar todas`},success:`{{action}} concluído em {{count}} impressora(s)`,partial:`{{succeeded}} bem-sucedido(s), {{failed}} falhou/falharam`,noneApplicable:`Nenhuma impressora selecionada está no estado correto para esta ação`,selectByState:`Selecionar por estado`},discovery:{title:`Descobrir Impressoras`,searching:`Procurando...`,scanning:`Escaneando...`,scanProgress:`Escaneando... {{scanned}}/{{total}}`,foundPrinters:`{{count}} impressora(s) encontrada(s)`,noPrintersFound:`Nenhuma impressora encontrada`,noPrintersFoundSubnet:`Nenhuma impressora encontrada na sub-rede especificada.`,noPrintersFoundNetwork:`Nenhuma impressora encontrada na rede.`,allConfigured:`Todas as impressoras descobertas já estão configuradas.`,alreadyAdded:`Já adicionada`,select:`Selecionar`,manualEntry:`Entrada Manual`,addFromCloud:`Adicionar da Nuvem`,subnetToScan:`Sub-rede para escanear`,dockerNote:`Docker detectado. Insira a sub-rede da sua impressora em notação CIDR. Requer network_mode: host no docker-compose.yml.`,scanSubnet:`Escanear Sub-rede para Impressoras`,discoverNetwork:`Descobrir Impressoras na Rede`,scanningSubnet:`Escaneando sub-rede para impressoras Bambu...`,scanningNetwork:`Escaneando rede...`,serialRequired:`Serial necessário`,unknown:`Desconhecido`,failedToStart:`Falha ao iniciar a descoberta`,customSubnetOption:`Sub-rede personalizada...`,customSubnetLabel:`Sub-rede personalizada (CIDR)`,customSubnetNote:`Use uma sub-rede personalizada se sua impressora estiver em uma rede diferente deste servidor. As portas FTP (990) e MQTT (8883) devem estar acessíveis através do limite de roteamento.`},drying:{start:`Iniciar secagem`,stop:`Parar secagem`,temperature:`Temperatura`,duration:`Duração`,hours:`horas`,timeRemaining:`{{time}} restante`,active:`Secagem`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`Secagem não suportada`,powerRequired:`Conecte o adaptador de energia AMS para ativar a secagem`,cannotDryNow:`O AMS não pode iniciar a secagem no momento`,startingDrying:`Iniciando secagem...`,toastCommandSent:`Comando de secagem enviado`,toastStopped:`Secagem interrompida`,toastNotStarted:`A impressora aceitou o comando, mas o AMS não iniciou a secagem. Verifique se o adaptador de energia do AMS está conectado e se a impressora está ociosa.`,screenOnly:`Nesta impressora, a secagem do AMS só pode ser controlada pela tela da própria impressora (limitação da Bambu)`,stoppingDrying:`Parando secagem...`,rotateTray:`Girar o carretel durante a secagem`,rotateUnavailableReason:`Indisponível — um slot deste AMS está carregado em direção ao cabeçote. O carretel está travado pelo tubo de alimentação e não pode girar. Retraia o filamento primeiro.`,startMode:`Horário de início`,modeNow:`Agora`,modeDelay:`Após um atraso`,modeAtTime:`Em um horário`,schedule:`Agendar`,scheduledFor:`Secagem agendada para {{time}}`,scheduledAsap:`Secagem agendada (aguardando a impressora)`,cancelScheduled:`Cancelar secagem agendada`,scheduleFailed:`Falha ao agendar a secagem`,retractFilament:`Recolha o filamento na saída do AMS para iniciar a secagem`,waitingAmsNotFound:`Aguardando a detecção do AMS`,waitingOffline:`Aguardando a impressora ficar online`,waitingPrinterBusy:`Aguardando a impressora ficar livre`,waitingAlreadyDrying:`Aguardando o ciclo de secagem atual terminar`,waitingInterrupted:`Interrompida, será retomada quando a impressora estiver livre`,scheduleFailedReason:`Falha na secagem agendada: {{reason}}`,scheduleFailedUnknown:`Erro desconhecido`,dismissFailed:`Dispensar`},amsBackup:{titleOn:`AMS Filament Backup está LIGADO. Clique para desativar.`,titleOff:`AMS Filament Backup está DESLIGADO. Clique para ativar.`,titleUnknown:`Estado do AMS Filament Backup indisponível nesta impressora.`,toastEnabled:`AMS Filament Backup ativado`,toastDisabled:`AMS Filament Backup desativado`,modalTitle:`AMS Filament Backup`,modalHelp:`Quando o slot ativo termina, a impressora alterna para slots com o mesmo preset e cor nesta ordem.`,modalNoSlots:`Nenhum filamento carregado.`,modalNoPairs:`Sem pares de backup — nenhum par de slots compartilha preset e cor.`,extruderRightShort:`D`,extruderLeftShort:`E`,stateOn:`Ativado`,stateOff:`Desativado`,stateUnknown:`Não suportado nesta impressora`},activeJobSlot:{title:`Este slot é o filamento {{n}} na impressão ativa`,ariaLabel:`Slot de impressão ativa {{n}}`},expectedSlot:{title:`A impressora está aguardando filamento neste slot`,ariaLabel:`Slot de filamento esperado {{n}}`,label:`{{ams}} · Slot {{slot}}`,external:`Bobina externa`},filaments:`Filamentos`,externalSpool:{hide:`Ocultar bobina externa`,show:`Mostrar bobina externa`},openCameraOverlay:`Abrir sobreposição da câmera`,openCameraWindow:`Abrir câmera em nova janela`,firmwareUpdateAvailable:`Atualização de firmware disponível: {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — Atualizado`,firmwareUpdateButton:`Atualizar`,plateDetection:{noPermission:`Você não tem permissão para atualizar impressoras`,enabledClick:`Verificação da placa ativada - Clique para desativar`,disabledClick:`Verificação da placa desativada - Clique para ativar`,manageCalibration:`Gerenciar calibração da detecção da placa`,calibrationRequired:`Calibração necessária`,calibrationInstructions:`Certifique-se de que a placa de construção esteja <strong>completamente vazia</strong>, em seguida clique em Calibrar.`,calibrationDescription:`A calibração captura uma imagem de referência da placa vazia. Verificações futuras compararão com esta referência para detectar objetos.`,calibrationTip:`<strong>Dica:</strong> Você pode armazenar até 5 calibrações para diferentes placas. O sistema usa automaticamente a melhor correspondência ao verificar.`,plateEmpty:`A placa parece vazia`,objectsDetected:`Objetos detectados na placa`,confidence:`Confiança`,difference:`Diferença`,analysisPreview:`Pré-visualização da análise:`,analysisLegend:`Caixa verde = área de detecção, Sobreposição vermelha = diferenças em relação à calibração`,savedReferences:`Referências salvas ({{count}}/{{max}})`,deleteReference:`Excluir referência`,labelPlaceholder:`Etiqueta...`,clickToEdit:`{{label}} - Clique para editar`,clickToAddLabel:`Clique para adicionar etiqueta`},speed:{title:`Velocidade de impressão`,silent:`Silencioso (50%)`,standard:`Padrão (100%)`,sport:`Sport (124%)`,ludicrous:`Ludicrous (166%)`},airduct:{title:`Modo do duto de ar`,cooling:`Resfriamento`,heating:`Aquecimento`},noSdCard:`Sem SD`,door:{open:`Aberta`,closed:`Fechada`},fans:{partCooling:`Ventilador de resfriamento da peça`,auxiliary:`Ventilador auxiliar`,leftAuxiliary:`Ventilador auxiliar esquerdo`,exhaust:`Exaustão`,chamber:`Ventilador da câmara`},clickToViewHmsErrors:`Clique para ver erros do HMS`,aiDetection:{safe:`Seguro`,warning:`Aviso`,failure:`Falha`,idle:`Ocioso`,error:`Não verificando`,unknown:`Iniciando`,tooltipError:`A Detecção de Falhas por IA não está verificando esta impressão: {{reason}} - clique para detalhes`,tooltipUnknown:`Detecção de Falhas por IA: aguardando o primeiro resultado - clique para detalhes`,errorHint:`Esta impressão não está sendo verificada. A detecção será retomada automaticamente assim que o problema abaixo for resolvido.`,tooltip:`Detecção de Falhas por IA: {{status}} (pontuação {{score}}) - clique para detalhes`,tooltipIdle:`Detecção de Falhas por IA ativada - o monitoramento começa na próxima impressão - clique para detalhes`,modalTitle:`Detecção de Falhas por IA - {{name}}`,currentStatus:`Status`,score:`Pontuação`,framesAnalyzed:`Quadros analisados`,idleHint:`Nenhuma impressão está sendo monitorada no momento. O monitoramento começa automaticamente na próxima impressão.`,lastError:`Último erro`,openSettings:`Abrir configurações`},estimatedCompletion:`Tempo estimado de conclusão`,plateNumber:`Placa {{number}}`,slotOptions:`Opções de slot`,amsPopup:{friendlyName:`Nome do AMS`,friendlyNamePlaceholder:`ex.: Nome amigável do AMS`,serialNumber:`Número de série`,firmwareVersion:`Firmware`,save:`Salvar`,clear:`Limpar`,noEditPermission:`Você não tem permissão para renomear unidades AMS`},firmwareModal:{title:`Atualização de Firmware`,titleUpToDate:`Informações do Firmware`,currentVersion:`Atual:`,latestVersion:`Última:`,releaseNotes:`Notas de Lançamento`,checkingPrereqs:`Verificando pré-requisitos...`,sdCardReady:`Cartão SD pronto. Clique abaixo para enviar o firmware.`,uploadedSuccess:`Firmware enviado para o cartão SD!`,applyInstructions:`Para aplicar a atualização na sua impressora:`,step1:`Na tela sensível ao toque da impressora, vá para <strong>Configurações</strong>`,step2:`Navegue até <strong>Firmware</strong>`,step3:`Selecione <strong>Atualizar a partir do cartão SD</strong>`,step4:`A atualização levará de 10 a 20 minutos`,done:`Concluído`,starting:`Iniciando...`,uploadFirmware:`Enviar Firmware`,uploadFailed:`Falha ao iniciar o envio: {{error}}`,uploadedToast:`Firmware enviado! Inicie a atualização na tela da impressora.`,availableVersions:`Versões disponíveis`,usable:`Utilizável`,unavailable:`Indisponível`,installed:`Instalada`,newerBadge:`mais recente`,olderBadge:`mais antiga`,currentBadge:`atual`},accessCodePlaceholder:`Deixe vazio para manter o atual`,roi:{title:`Área de Detecção (ROI)`,xStart:`Início X`,yStart:`Início Y`,width:`Largura`,height:`Altura`,instruction:`Ajuste a área de detecção para focar na placa de construção. A caixa verde na pré-visualização mostra a área atual.`},developerModeWarning:`O modo desenvolvedor LAN não está ativado em: {{names}}. Alguns recursos podem não funcionar.`,howToEnable:`Como ativar`,incompatibleFile:`Este arquivo foi fatiado para {{slicedFor}}, mas esta impressora é uma {{printerModel}}`,dropNotPrintable:`Apenas arquivos .gcode e .gcode.3mf podem ser impressos`,dropToPrint:`Solte para imprimir`,dropToQueue:`Solte para adicionar à fila`},archives:{media:{title:`Vídeos da impressão`,download:`Baixar vídeos da impressão`,searching:`Procurando vídeos na impressora…`,searchFailed:`Não foi possível procurar vídeos na impressora.`,none:`Nenhum timelapse ou trecho da câmera IP foi encontrado para esta impressão.`,attachedTimelapse:`Timelapse anexado`,printerFiles:`Arquivos ainda presentes na impressora`,downloadSelected:`Baixar selecionados`,printerMissing:`A impressora não está mais configurada`,timelapseUnavailable:`Não foi possível ler o diretório de timelapses`,ipcamUnavailable:`Não foi possível ler o diretório da câmera IP`},title:`Arquivos de Impressão`,no3mfBanner:{title:`Algumas impressões recentes não puderam ser arquivadas com miniaturas`,body:`O fatiador não deixou o arquivo .gcode.3mf no cartão SD da impressora, então o Bambuddy não conseguiu obter nem a miniatura nem os metadados do fatiador. Normalmente isso acontece porque "Armazenar arquivos enviados no armazenamento externo" está desligado no fatiador (aba Dispositivo do Bambu Studio / OrcaSlicer).`,docsLink:`Ver passo 4 da instalação`,docsLinkInternalStorage:`Por que isso acontece`,titleInternalStorage:`Algumas impressões recentes ficaram no armazenamento interno da impressora`,bodyInternalStorage:`O Bambu Studio colocou o arquivo fatiado no armazenamento interno da impressora em vez do cartão, então o Bambuddy não tinha nada para ler via FTP. Na série H2, na P2S e na X2D o botão «Imprimir» sempre faz isso: só «Enviar» oferece escolha, e ela também vem com «Cache» por padrão. Essas impressões continuam arquivadas com nome e tempos, apenas sem miniatura nem metadados do fatiador. Para arquivos completos, inicie a impressão pelo Bambuddy ou fatie no OrcaSlicer, ou então no Bambu Studio use «Enviar» com «Externo» e inicie a impressão depois. Todos precisam de um cartão ou pendrive na impressora.`,titleNoExternalStorage:`Algumas impressões recentes não puderam ser arquivadas — sem armazenamento na impressora`,bodyNoExternalStorage:`A impressora não detecta cartão nem pendrive no slot, então o arquivo fatiado não tinha onde ficar e o Bambuddy nada para ler. Insira um e a próxima impressão será arquivada por completo.`,titleInternalHistory:`Algumas impressões recentes começaram a partir de um arquivo que já estava na impressora`,bodyInternalHistory:`Essas impressões saíram da própria biblioteca da impressora: uma reimpressão pela tela dela, um início pelo Handy ou um arquivo enviado antes e impresso depois. O Bambuddy lê os arquivos de impressão por FTP, que só serve o cartão ou o pendrive, enquanto a impressora guarda essa biblioteca em uma área que o FTP não alcança, então não havia nenhum 3MF para ler. Nenhuma opção do fatiador muda isso, porque nada foi enviado para essas impressões. Elas continuam arquivadas com nome e tempos, e «Editar Arquivo» permite preencher à mão o filamento usado. Para um arquivo completo, inicie a impressão pelo Bambuddy ou pelo seu fatiador.`,titleFtpsCooloff:`Algumas impressões recentes não puderam ser arquivadas — a impressora recusou a conexão de arquivos`,bodyFtpsCooloff:`O Bambuddy abriu a porta de transferência de arquivos da impressora (FTPS 990) e a impressora respondeu com algo que não é TLS, então nada pôde ser lido dela. Essas impressões continuam arquivadas com nome e tempos, apenas sem miniatura nem metadados do fatiador. Não é uma configuração do fatiador nem algo que você mudou — os mesmos modelos e firmwares funcionam normalmente em outras instalações, e uma impressora afetada costuma voltar a funcionar sozinha depois. Após uma falha dessas, o Bambuddy pausa as transferências para essa impressora por cinco minutos e volta a buscar o arquivo quando a pausa termina, de modo que um episódio curto se resolve sozinho; um cartão ainda vazio significa que a recusa durou mais que a nova tentativa. Ainda não se sabe o que provoca isso. Se continuar acontecendo, ative o registro de depuração na página Sistema e anexe um pacote de suporte ao seu relato.`,titleFtpTransferFailed:`Algumas impressões recentes não puderam ser arquivadas — a transferência do arquivo esgotou o tempo`,bodyFtpTransferFailed:`O arquivo fatiado estava no cartão da impressora e a impressora chegou a servi-lo, mas a transferência não terminou no tempo permitido. No início da impressão a impressora também cuida da câmera, das mensagens de status e do envio do trabalho, e um 3MF grande nem sempre consegue passar no meio disso. Essas impressões continuam arquivadas com nome e tempos, apenas sem miniatura nem metadados do fatiador. Não é uma configuração do fatiador nem algo que você mudou. O Bambuddy volta a buscar o arquivo três vezes ao longo dos dez minutos seguintes, então a maioria se resolve sozinha; um cartão ainda vazio significa que todas essas tentativas também esgotaram o tempo. Se continuar acontecendo, aumente Tempo limite de conexão em Configurações > Rede > Nova tentativa de FTP.`,dismissLabel:`Dispensar este aviso`},searchPlaceholder:`Pesquisar arquivos...`,filterByPrinter:`Filtrar por impressora`,filterByStatus:`Filtrar por status`,sortBy:`Ordenar por`,sortNewest:`Mais recentes primeiro`,sortOldest:`Mais antigos primeiro`,sortName:`Nome`,sortDuration:`Duração`,sortLargest:`Maiores primeiro`,sortSmallest:`Menores primeiro`,sortSize:`Tamanho`,noArchives:`Nenhum arquivo encontrado`,noArchivesSearch:`Nenhum arquivo corresponde à sua pesquisa`,originalPrintNotVisible:`Impressão original não visível - tente limpar os filtros`,noArchivesYet:`Ainda não há arquivos`,prints:`impressões`,pagination:{showing:`Mostrando`,to:`a`,of:`de`,show:`Mostrar`,page:`Página`,all:`Todos`},loadingArchives:`Carregando arquivos...`,releaseToUpload:`Solte para enviar`,showAll:`Mostrar todos`,showFavoritesOnly:`Mostrar apenas favoritos`,gridView:`Visualização em grade`,listView:`Visualização em lista`,calendarView:`Visualização em calendário`,logView:`Registro de impressão`,manageTags:`Gerenciar etiquetas`,showFailedPrints:`Mostrar impressões falhas`,hideFailedPrints:`Ocultar impressões falhas`,hideDuplicates:`Ocultar duplicados`,viewOriginalPrint:`Clique para visualizar a impressão original (#{{id}})`,printTime:`Tempo de impressão`,filamentUsed:`Filamento usado`,cost:`Custo`,preview:`Pré-visualizar`,deleteArchive:`Excluir arquivo`,deleteConfirm:`Tem certeza de que deseja excluir este arquivo?`,favorite:`Favorito`,unfavorite:`Remover dos favoritos`,viewDetails:`Ver detalhes`,status:{completed:`Concluído`,failed:`Falhou`,stopped:`Parado`},toast:{source3mfAttached:`Arquivo de origem 3MF anexado: {{filename}}`,failedUploadSource3mf:`Falha ao enviar arquivo de origem 3MF`,source3mfRemoved:`Arquivo de origem 3MF removido`,failedRemoveSource3mf:`Falha ao remover arquivo de origem 3MF`,f3dAttached:`F3D anexado: {{filename}}`,failedUploadF3d:`Falha ao enviar F3D`,f3dRemoved:`F3D removido`,failedRemoveF3d:`Falha ao remover F3D`,timelapseAttached:`Timelapse anexado: {{filename}}`,timelapseAlreadyAttached:`Timelapse já anexado`,noMatchingTimelapse:`Nenhum timelapse correspondente encontrado`,failedScanTimelapse:`Falha ao escanear timelapse`,failedAttachTimelapse:`Falha ao anexar timelapse`,timelapseRemoved:`Timelapse removido`,failedRemoveTimelapse:`Falha ao remover timelapse`,timelapseUploaded:`Timelapse enviado: {{filename}}`,failedUploadTimelapse:`Falha ao enviar timelapse`,archiveDeleted:`Arquivo excluído`,failedDeleteArchive:`Falha ao excluir arquivo`,addedToFavorites:`Adicionado aos favoritos`,removedFromFavorites:`Removido dos favoritos`,projectUpdated:`Projeto atualizado`,failedUpdateProject:`Falha ao atualizar projeto`,linkCopied:`Link copiado para a área de transferência`,failedCopyLink:`Falha ao copiar link`,photoDeleted:`Foto excluída`,failedDeletePhoto:`Falha ao excluir foto`,failedDeleteArchives:`Falha ao excluir arquivos`,failedUpdateFavorites:`Falha ao atualizar favoritos`,exportDownloaded:`Exportação baixada`,exportFailed:`Falha na exportação`},menu:{print:`Imprimir`,openInBambuStudio:`Abrir no Slicer`,slice:`Fatiar`,externalLink:`Link externo`,viewOnMakerWorld:`Ver no MakerWorld`,preview3d:`Pré-visualização 3D`,viewTimelapse:`Ver Timelapse`,scanForTimelapse:`Escanear Timelapse`,uploadTimelapse:`Enviar Timelapse`,removeTimelapse:`Remover Timelapse`,downloadSource3mf:`Baixar Source 3MF`,uploadSource3mf:`Enviar Source 3MF`,replaceSource3mf:`Substituir Source 3MF`,removeSource3mf:`Remover Source 3MF`,uploadF3d:`Enviar F3D`,replaceF3d:`Substituir F3D`,downloadF3d:`Baixar F3D`,removeF3d:`Remover F3D`,download:`Baixar`,copyDownloadLink:`Copiar link de download`,qrCode:`Qr Code`,viewPhotos:`Ver fotos`,viewPhotosCount:`Ver fotos ({{count}})`,projectPage:`Página do projeto`,addToFavorites:`Adicionar aos favoritos`,removeFromFavorites:`Remover dos favoritos`,edit:`Editar`,printLog:`Histórico de impressões`,goToProject:`Ir para o projeto: {{name}}`,addToProject:`Adicionar ao projeto`,removeFromProject:`Remover do projeto`,loading:`Carregando...`,noProjectsAvailable:`Nenhum projeto disponível`,searchProjects:`Pesquisar projetos…`,select:`Selecionar`,deselect:`Desmarcar`,delete:`Excluir`},permission:{noReprint:`Você não tem permissão para reimprimir este arquivo`,noAddToQueue:`Você não tem permissão para adicionar à fila`,noUpdateArchives:`Você não tem permissão para atualizar arquivos`,noUploadFiles:`Você não tem permissão para enviar arquivos`,noDownload:`Você não tem permissão para baixar arquivos`,noCopyLink:`Você não tem permissão para copiar links de download`,noDelete:`Você não tem permissão para excluir este arquivo`,noEdit:`Você não tem permissão para editar esta entrada`,noCreate:`Você não tem permissão para criar arquivos`},platePicker:{title:`Selecione a placa para visualizar`,hint:`Este arquivo contém várias placas. Escolha uma para abrir no visualizador GCode.`,plateLabel:`Placa {{index}}`,objectCount:`{{count}} objeto`,objectCount_plural:`{{count}} objetos`,noGcode:`Este arquivo não contém G-code fatiado para visualizar. Abra-o no Bambu Studio para fatiar primeiro.`},card:{previousPlate:`Placa anterior`,nextPlate:`Próxima placa`,plateNumber:`Placa {{index}}`,moreOptions:`Clique com o botão direito para mais opções`,addToFavorites:`Adicionar aos favoritos`,removeFromFavorites:`Remover dos favoritos`,cancelled:`cancelado`,failed:`falha`,duplicate:`duplicado`,duplicateTitle:`Este modelo já foi impresso antes`,openSource3mf:`Abrir source 3MF no Bambu Studio (clique com o botão direito para mais opções)`,downloadF3d:`Baixar arquivo de design do Fusion 360`,viewTimelapse:`Ver timelapse`,viewPhoto:`Ver 1 foto`,viewPhotos:`Ver {{count}} fotos`,openFolder:`Abrir pasta: {{name}}`,slicedFile:`Arquivo fatiado - pronto para imprimir`,sourceFile:`Apenas arquivo fonte - nenhum mapeamento AMS disponível`,gcode:`GCODE`,source:`SOURCE`,project:`Projeto: {{name}}`,runsBadge:`{{count}} impressões`,runsBadgeTitle:`{{count}} impressões no total — {{successful}} bem-sucedidas, {{failed}} com falha. Clique para ver o histórico completo.`,estimated:`Estimado: {{time}}`,actual:`Real: {{time}}`,accuracy:`Precisão: {{percent}}%`,filament:`{{weight}} g`,layer:`{{count}} camada`,layers:`{{count}} camadas`,object:`{{count}} objeto`,objects:`{{count}} objetos`,slicedFor:`Fatiado para {{model}}`,uploadedBy:`Enviado por`,noPermissionReprint:`Você não tem permissão para reimprimir`,noFileForReprint:`Nenhum arquivo 3MF disponível — o arquivo não pôde ser baixado da impressora quando a impressão foi registrada`,slicerAmsMapping:`Mapeamento de AMS salvo ({{printer}})`,slicerAmsMappingTooltip:`A escolha de slot AMS do fatiador foi salva para {{printer}}. Os números de slot só significam algo naquela impressora, portanto uma reimpressão só os reutiliza se voltar a mirar {{printer}}.`,noPermissionEdit:`Você não tem permissão para editar arquivos`,noPermissionDelete:`Você não tem permissão para excluir arquivos`,openInBambuStudio:`Abrir no Bambu Studio`,openInBambuStudioToSlice:`Abrir no Bambu Studio para fatiar`,slice:`Fatiar`,externalLink:`Link externo`,makerWorld:`MakerWorld – {{designer}}`,viewProject:`Ver projeto`,noExternalLink:`Nenhum link externo`,preview3d:`Visualização 3D`,download:`Baixar`,edit:`Editar`,delete:`Excluir`},runLog:{title:`Histórico de impressões`,modalTitle:`Histórico de impressões — {{name}}`,modalTitleFallback:`este arquivo`,empty:`Nenhum evento de impressão registrado para este arquivo ainda.`,col:{date:`Data`,status:`Status`,duration:`Duração`,filament:`Filamento`,cost:`Custo`},status:{completed:`Concluída`,failed:`Falhou`,cancelled:`Cancelada`,stopped:`Interrompida`,skipped:`Ignorada`,printing:`Imprimindo`}},modal:{deleteArchive:`Excluir Arquivo`,deleteConfirm:`Tem certeza de que deseja excluir "{{name}}"? Esta ação não pode ser desfeita.`,deleteButton:`Excluir`,deletePurgeStats:`Remover também esta impressão das Quick Stats (filamento, tempo, custo, energia)`,deleteQueueItemsWarning:`{{count}} item(ns) de fila vinculado(s) a este arquivo também serão removidos.`,deleteBlockedByPrinting:`Não é possível excluir — {{count}} item(ns) de fila estão imprimindo agora. Pare a impressão primeiro e tente novamente.`,removeSource3mf:`Remover Source 3MF`,removeSource3mfConfirm:`Tem certeza de que deseja remover o arquivo source 3MF de "{{name}}"? Isso excluirá o arquivo original do projeto do fatiador.`,removeButton:`Remover`,removeF3d:`Remover F3D`,removeF3dConfirm:`Tem certeza de que deseja remover o arquivo de design do Fusion 360 de "{{name}}"?`,removeTimelapse:`Remover Timelapse`,removeTimelapseConfirm:`Tem certeza de que deseja remover o vídeo timelapse de "{{name}}"?`,timelapse:`{{name}} – Timelapse`,selectTimelapse:`Selecionar Timelapse`,selectTimelapseDesc:`Nenhuma correspondência automática encontrada. Selecione o timelapse para esta impressão:`,deleteArchives:`Excluir Arquivos`,deleteArchivesConfirm:`Tem certeza de que deseja excluir {{count}} arquivo(s)? Esta ação não pode ser desfeita.`,deleteCount:`Excluir {{count}}`},page:{title:`Arquivos`,printsCount:`{{filtered}} de {{total}} impressões`,dropFilesHere:`Solte arquivos .3mf aqui`,releaseToUpload:`Solte para enviar`,only3mfSupported:`Apenas arquivos .3mf são suportados`,close:`Fechar`,selected:`{{count}} selecionado(s)`,selectAll:`Selecionar Todos`,tags:`Etiquetas`,project:`Projeto`,favorite:`Favorito`,delete:`Excluir`,toggledFavorites:`Favoritos alternados para {{count}} arquivo(s)`,failedUpdateFavorites:`Falha ao atualizar favoritos`,archivesDeleted:`{{count}} arquivo(s) excluído(s)`,failedDeleteArchives:`Falha ao excluir arquivos`,photoDeleted:`Foto excluída`,failedDeletePhoto:`Falha ao excluir foto`},list:{name:`Nome`,printer:`Impressora`,date:`Data`,size:`Tamanho`,actions:`Ações`,hasTimelapse:`Possui timelapse`},log:{date:`Data`,printName:`Nome da Impressão`,printer:`Impressora`,user:`Usuário`,status:`Status`,duration:`Duração`,filament:`Filamento`,filamentUsed:`Filamento usado`,cost:`Custo`,energy:`Energia`,energyCost:`Custo de energia`,completedAt:`Concluído`,columns:`Colunas`,sortBy:`Ordenar por {{column}}`,allPrinters:`Todas as Impressoras`,allUsers:`Todos os Usuários`,allStatuses:`Todos os Status`,cancelled:`Cancelado`,skipped:`Ignorado`,dateFrom:`De`,dateTo:`Até`,noEntries:`Nenhuma entrada de registro de impressão encontrada`,showing:`Mostrando {{count}} de {{total}} entradas`,rowsPerPage:`Linhas`,page:`Página`,prev:`Anterior`,next:`Próxima`,clearLog:`Limpar Registro`,clearLogTitle:`Limpar Registro de Impressão`,clearLogConfirm:`Todas as entradas do registro de impressão serão permanentemente excluídas. Arquivos e itens da fila não serão afetados. Esta ação não pode ser desfeita. Tem certeza?`,clearLogButton:`Limpar Tudo`,cleared:`{{count}} entradas do registro de impressão limpas`,clearFailed:`Falha ao limpar o registro de impressão`,deleteEntryTitle:`Excluir entrada do registro de impressão`,deleteEntryConfirm:`Esta entrada será removida do registro e suas contribuições de filamento, tempo e custo desaparecerão das estatísticas rápidas. O arquivo correspondente (se houver) não é afetado. Esta ação não pode ser desfeita.`,entryDeleted:`Entrada do registro de impressão excluída`,entryDeleteFailed:`Falha ao excluir entrada do registro de impressão`,editEntryTitle:`Editar entrada do registro de impressão`,editEntryDescription:`Classifique esta impressão. O widget Análise de falhas agrupa por esses valores, então as atualizações são refletidas nas estatísticas imediatamente.`,entryUpdated:`Entrada do registro atualizada`,entryUpdateFailed:`Falha ao atualizar a entrada do registro`,statuses:{completed:`Concluída`,failed:`Falhou`,stopped:`Parada`,cancelled:`Cancelada`,skipped:`Ignorada`}}},dispatchToast:{untitled:`Trabalho de impressão`,startingPrints:`Iniciando impressões`,progressSummary:`{{complete}}/{{total}} concluídas • Processando: {{processing}}`,expandDetails:`Expandir detalhes do envio`,collapseDetails:`Recolher detalhes do envio`,awaitingPrinter:`Aguardando impressora…`,status:{processing:`Processando`,completed:`Concluída`,failed:`Falhou`},failed:{generic:`Falha no envio`,upload_failed:`Falha ao enviar para a impressora`,start_command_failed:`Impressora rejeitou o comando de início`},dismiss:`Fechar`},pipelineRuns:{title:`Execuções de pipeline`,loading:`Carregando…`,empty:`Nenhuma execução de pipeline ainda.`,filter:{pipeline:`Pipeline`,status:`Status`,target:`Destino`,all:`Todas`,allPipelines:`Todas as pipelines`,allStatus:`Todos os status`,allTargets:`Todos os destinos`,clear:`Limpar filtros`,noMatches:`Nenhuma execução corresponde aos filtros atuais.`},totalCount_one:`{{n}} execução`,totalCount_other:`{{n}} execuções`,copies:`{{n}} cópias`,failedCount:`{{n}} falharam`,copyN:`Cópia {{n}}`,retryFailed:`Repetir falhas`,retryOf:`nova tentativa de #{{n}}`,pagination:`{{start}}–{{end}} de {{total}}`,toast:{cancelled:`Execução cancelada`,cancelFailed:`Cancelamento falhou`,retryStarted:`Nova tentativa iniciada`,retryFailed:`Nova tentativa falhou`,cleared:`{{n}} execuções limpas`,clearFailed:`Falha ao limpar`},clearLog:`Limpar histórico`,clearConfirmTitle:`Limpar histórico?`,clearConfirmBody:`Excluir todas as execuções de pipeline concluídas, falhas, canceladas e com falha parcial? Execuções em andamento são mantidas. Isso não pode ser desfeito.`,clearConfirmAction:`Limpar`,jobStatus:{pending:`pendente`,awaiting_printer:`aguardando impressora`,queued:`na fila`,printing:`imprimindo`,completed:`concluída`,failed:`falhou`,cancelled:`cancelada`},cancelledByUser:`Cancelado pelo usuário`},queue:{filamentShort:{rowBadge:`Filamento insuficiente para a bobina atribuida`,rowTooltip:`O escalonador sinalizou este item. Clique em Play para ver o deficit por slot e decidir se quer imprimir mesmo assim.`,confirmTitle:`Filamento insuficiente`,confirmIntro:`A bobina atribuida nao pode cobrir pelo menos um slot. Imprimir mesmo assim?`,lineItem:`Slot {{slot}}: precisa de {{required}} g, restam {{remaining}} g`,unknown:`desconhecido`,printAnyway:`Imprimir mesmo assim`},slicerAmsMapping:{rowBadge:`Slots AMS salvos para esta impressora`,rowTooltip:`Este arquivo mantém os slots AMS exatos escolhidos pelo fatiador, salvos para a impressora deste item. Uma reimpressão nela pode reutilizar esses carretéis em vez de casar novamente por tipo e cor.`},title:`Fila de Impressão`,subtitle:`Agende e gerencie seus trabalhos de impressão`,editQueueItem:`Editar Item da Fila`,selectAllPlates:`Selecionar todas as {{count}} placas`,deselectAll:`Desmarcar tudo`,printQueued:`Impressão adicionada à fila`,printQueuedWillStartWhenIdle:`Iniciará quando a impressora estiver ociosa`,itemsQueued:`{{count}} itens adicionados à fila`,sending:`Enviando...`,sendingProgress:`Enviando {{current}}/{{total}}...`,adding:`Adicionando...`,addingProgress:`Adicionando {{current}}/{{total}}...`,savingProgress:`Salvando {{current}}/{{total}}...`,clearQueue:`Limpar Fila`,clearHistory:`Limpar Histórico`,emptyQueue:`Fila vazia`,position:`Posição`,scheduledTime:`Hora Agendada`,moveUp:`Mover para Cima`,moveDown:`Mover para Baixo`,startNow:`Iniciar Agora`,printingInProgress:`Impressão em andamento...`,viewArchive:`Ver Arquivo`,viewInFileManager:`Ver no Gerenciador de Arquivos`,itemCount:`{{count}} item`,itemCount_plural:`{{count}} itens`,dragToReorder:`Arraste para reordenar (apenas ASAP)`,reorderHint:`A posição afeta apenas itens ASAP. Itens agendados são executados no horário definido.`,sjf:{label:`SJF`,tooltip:`Trabalho mais curto primeiro — o agendador prioriza impressões mais curtas`},addedBy:`Adicionado por {{name}}`,nextInQueue:`Próximo na fila`,clearPlateSuccess:`Placa limpa — pronta para a próxima impressão`,plateNumber:`Placa {{index}}`,quantity:`Quantidade`,quantityHint:`Cria {{count}} itens na fila`,plateQuantityLabel:`Impressões de {{plate}}`,plateQuantityTotal_one:`{{count}} impressão no total`,plateQuantityTotal_other:`{{count}} impressões no total`,batchOrders:{title:`Pedidos em lote`,emptyTitle:`Nenhum pedido em lote`,emptyDescription:`Coloque na fila um arquivo com várias mesas, ou mais de uma cópia de uma mesa, e o pedido aparece aqui com o progresso.`,filter:{active:`Ativos`,completed:`Concluídos`,cancelled:`Cancelados`,all:`Todos`},status:{active:`Ativo`,completed:`Concluído`,cancelled:`Cancelado`},noTargets:`Apenas agrupamento`,noTargetsHint:`Criado antes das quantidades por mesa, então acompanha as impressões enfileiradas em vez de uma meta.`,dispatchRemaining:`Enfileirar {{count}} restantes`,dispatchPlate:`Enfileirar restantes`,strandedPlate:`Nada de onde copiar as configurações`,strandedNotice:`Não é possível enfileirar {{runs}} das {{owed}} impressões ainda devidas: essa placa não tem mais nenhuma impressão na fila ou concluída de onde copiar as configurações. Enfileire a placa uma vez a partir do arquivo ou cancele o pedido.`,dispatched:`Impressões restantes enfileiradas para {{name}}`,plateProgress:`{{completed}} de {{target}} prontas`,remaining:`{{count}} ainda devidas`,failed:`{{count}} falharam`,printing:`{{count}} imprimindo`,wholeFile:`Arquivo inteiro`,due:`Vence {{date}}`,costSoFar:`{{amount}} até agora`,costRemaining:`({{amount}} a gastar)`},activeBatches:`Lotes ativos`,batchProgress:`{{completed}} de {{total}} concluídos`,cancelBatch:`Cancelar restantes`,batchCancelled:`Itens restantes do lote cancelados`,cancelBatchConfirmTitle:`Cancelar lote`,cancelBatchConfirmMessage:`Encerrar este pedido? As impressões ainda na fila são canceladas e ele para de cobrar o que não produziu.`,batch:{defaultName:`Lote`,label:`{{count}} item`,label_plural:`{{count}} itens`,pendingCount:`{{count}} pendente`,pendingCount_plural:`{{count}} pendentes`,expand:`Expandir lote`,collapse:`Recolher lote`,groupAsBatch:`Agrupar como lote…`,groupAsBatchDescription:`Combine os {{count}} itens selecionados em um único lote recolhível.`,nameLabel:`Nome do lote`,namePlaceholder:`ex. Presentes de sexta`,create:`Criar lote`,ungroup:`Desagrupar`,ungroupConfirmTitle:`Desagrupar lote?`,ungroupConfirmMessage:`Os itens permanecerão na fila mas não estarão mais agrupados.`,dragGroup:`Arrastar grupo`},tabs:{batches:`Lotes`,queue:`Fila`,history:`Histórico`,timeline:`Linha do tempo`,pipelines:`Processos`},layout:{flatList:`Lista`,byPrinter:`Por impressora`,groupByPrinter:`Agrupar por impressora`},history:{emptyTitle:`Sem histórico ainda`,emptyDescription:`Impressões concluídas, canceladas e com falha aparecerão aqui.`,showMore:`Mostrar mais`,showingCount:`Mostrando {{shown}} de {{total}}`},dragGhost:{multiCount:`{{count}} itens`,batch:`{{name}} ({{count}} cópia)`,batch_plural:`{{name}} ({{count}} cópias)`},sections:{currentlyPrinting:`Imprimindo Atualmente`,queued:`Na Fila`,history:`Histórico`},status:{pending:`Pendente`,waiting:`Aguardando`,printing:`Imprimindo`,paused:`Pausado`,completed:`Concluído`,failed:`Falhou`,skipped:`Ignorado`,cancelled:`Cancelado`},summary:{printing:`Imprimindo`,queued:`Na Fila`,totalTime:`Tempo Total da Fila`,totalWeight:`Peso Total da Fila`,history:`Histórico`},filter:{allPrinters:`Todas as Impressoras`,unassigned:`Não Atribuído`,allStatus:`Todos os Status`,allLocations:`Todos os Locais`,any:`Qualquer`},sort:{byPosition:`Ordenar por Posição`,byName:`Ordenar por Nome`,byPrinter:`Ordenar por Impressora`,bySchedule:`Ordenar por Agendamento`,byDate:`Ordenar por Data`,ascendingOldest:`Crescente (mais antigo primeiro)`,descendingNewest:`Decrescente (mais recente primeiro)`},badges:{staged:`Preparado (início manual)`,requiresPrevious:`Requer sucesso anterior`,autoPowerOff:`Desligamento automático`,gcodeInjection:`G-code`},empty:{title:`Nenhuma impressão agendada`,description:`Agende uma impressão a partir da página de Arquivos usando a opção "Agendar" no menu de contexto, ou arraste e solte arquivos para começar.`},time:{etaIfStartedNow:`Horário de conclusão se este trabalho começasse agora`,whenFree:`Quando uma impressora estiver livre`,overdue:`Atrasado`,now:`Agora`,lessThanMinute:`Em menos de um minuto`,inMinutes:`Em {{count}} min`,inHours:`Em {{count}} horas`},actions:{startPrint:`Iniciar Impressão`,stopPrint:`Parar Impressão`,requeue:`Reenfileirar`},bulkEdit:{title:`Editar {{count}} Item`,title_plural:`Editar {{count}} Itens`,description:`Apenas as configurações alteradas serão aplicadas aos itens selecionados.`,printer:`Impressora`,noChange:`— Sem alterações —`,queueOptions:`Opções de Fila`,staged:`Preparado (início manual)`,autoPowerOff:`Desligamento automático após impressão`,requirePrevious:`Requer sucesso anterior`,gcodeInjection:`Injetar G-code`,printOptions:`Opções de Impressão`,bedLevelling:`Nivelamento da Mesa`,flowCalibration:`Calibração de Fluxo`,vibrationCalibration:`Calibração de Vibração`,layerInspection:`Inspeção da Primeira Camada`,timelapse:`Timelapse`,useAms:`Usar AMS`,nozzleOffsetCali:`Calibração de offset dos bicos`,applyChanges:`Aplicar Alterações`,selectAll:`Selecionar Todos`,deselectAll:`Desmarcar Todos`,selected:`{{count}} selecionado(s)`,editSelected:`Editar Selecionados`,cancelSelected:`Cancelar Selecionados`},confirm:{cancelTitle:`Cancelar Impressão Agendada`,cancelMessage:`Tem certeza de que deseja cancelar "{{name}}"?`,stopTitle:`Parar Impressão`,stopMessage:`Tem certeza de que deseja parar a impressão atual "{{name}}"? Isso cancelará o trabalho de impressão na impressora.`,removeTitle:`Remover do Histórico`,removeMessage:`Tem certeza de que deseja remover "{{name}}" do histórico da fila?`,clearHistoryTitle:`Limpar Histórico`,clearHistoryMessage:`Tem certeza de que deseja remover todos os {{count}} itens do histórico?`,cancelButton:`Cancelar Impressão`,stopButton:`Parar Impressão`,thisPrint:`esta impressão`,thisItem:`este item`},toast:{cancelled:`Item da fila cancelado`,cancelFailed:`Falha ao cancelar item`,removed:`Item da fila removido`,keptForOrder:`Cancelado em vez de removido: é a única impressão de onde o pedido pode reenfileirar esta placa`,historyKeptForOrders:`{{kept}} mantidas porque pedidos ainda precisam delas.`,removeFailed:`Falha ao remover item`,stopped:`Impressão parada`,stopFailed:`Falha ao parar impressão`,released:`Impressão liberada para a fila`,startFailed:`Falha ao iniciar impressão`,reorderFailed:`Falha ao reordenar fila`,historyCleared:`Limpar {{count}} item(s) do histórico`,clearHistoryFailed:`Falha ao limpar histórico`,updateFailed:`Falha ao atualizar itens`,bulkCancelled:`Cancelado {{count}} item(s)`,bulkCancelFailed:`Falha ao cancelar itens`,batchCreated:`Lote "{{name}}" criado`,batchCreateFailed:`Falha ao criar o lote`,batchUngrouped:`{{count}} item(ns) desagrupado(s)`,batchUngroupFailed:`Falha ao desagrupar o lote`,resumedAfterFailure:`Fila retomada — {{restored}} trabalho(s) restaurado(s) para pendente`,resumeAfterFailureFailed:`Falha ao retomar a fila`},resumeAfterFailure:{banner:`{{printer}} está bloqueada por uma falha de impressão anterior — {{count}} trabalho(s) ignorado(s)`,bannerHint:`Resolva o problema da impressora e retome para restaurar os trabalhos ignorados e remover o bloqueio.`,button:`Retomar após falha`,confirmTitle:`Retomar a fila após a falha?`,confirmMessage:`Restaurar {{count}} trabalho(s) ignorado(s) em {{printer}} para pendente e remover o bloqueio da impressão anterior. Verifique se a impressora está pronta antes de continuar.`},timeline:{listView:`Lista`,timelineView:`Linha do tempo`,unassigned:`Não atribuído`,noData:`Nenhuma impressão agendada para este dia`,nothingCommitted:`Sem programações confirmadas nesta janela. Itens preparados, itens em espera e trabalhos ASAP em impressoras ociosas não são mostrados — defina um horário agendado ou libere um item preparado para vê-lo aqui.`,allDoneBy:`Todas as impressões concluídas até {{time}}`,staged:`Preparado`,filterAll:`Mostrar tudo`,filterPrinting:`Imprimindo`,filterQueued:`Na fila`,time:{anyMoment:`a qualquer momento`,minutesLeft:`{{minutes}}m restantes`,hoursLeft:`{{hours}}h restantes`,hoursMinutesLeft:`{{hours}}h {{minutes}}m restantes`},day:{previous:`Dia anterior`,next:`Próximo dia`,today:`Hoje`},window:{back12h:`Voltar 12 horas`,forward12h:`Avançar 12 horas`,now:`Agora`},printerColumnHeader:`Impressora`},permissions:{noStopPrint:`Você não tem permissão para parar impressões`,noStartPrint:`Você não tem permissão para iniciar impressões`,noEdit:`Você não tem permissão para editar este item da fila`,noCancel:`Você não tem permissão para cancelar este item da fila`,noRequeue:`Você não tem permissão para reenfileirar itens`,noRemove:`Você não tem permissão para remover este item da fila`,noClearHistory:`Você não tem permissão para limpar todo o histórico`,noEditItems:`Você não tem permissão para editar itens da fila`,noCancelItems:`Você não tem permissão para cancelar itens da fila`}},stats:{title:`Estatísticas`,subtitle:`Arraste os widgets para reorganizar. Clique no ícone de olho para ocultar.`,overview:`Visão Geral`,totalPrints:`Total de Impressões`,successRate:`Taxa de Sucesso`,totalPrintTime:`Tempo Total de Impressão`,printTime:`Tempo de Impressão`,totalFilament:`Filamento Total Utilizado`,filamentUsed:`Filamento Utilizado`,filamentCost:`Custo do Filamento`,totalCost:`Custo Total`,energyUsed:`Energia Utilizada`,energyCost:`Custo da Energia`,energyWarmingUpTooltip:`O monitoramento de energia ainda está coletando snapshots por hora. Os totais por período ficarão precisos quando houver pelo menos um snapshot antes do intervalo selecionado. Valores iniciais podem ser subestimados.`,averagePrintTime:`Tempo Médio de Impressão`,printsPerDay:`Impressões por Dia`,byPrinter:`Por Impressora`,printsByPrinter:`Impressões por Impressora`,byMaterial:`Por Material`,byMonth:`Por Mês`,last7Days:`Últimos 7 Dias`,last30Days:`Últimos 30 Dias`,last90Days:`Últimos 90 Dias`,allTime:`Todo o Tempo`,quickStats:`Estatísticas Rápidas`,printActivity:`Atividade de Impressão`,filamentTypes:`Tipos de Filamento`,filamentTrends:`Tendências de Filamento`,failureAnalysis:`Análise de Falhas`,timeAccuracy:`Precisão do Tempo`,successful:`Bem-sucedido:`,failed:`Falhou:`,cancelled:`Cancelado:`,perfectEstimate:`100% = estimativa perfeita`,noTimeAccuracyData:`Nenhum dado de precisão de tempo disponível`,noFilamentData:`Nenhum dado de filamento disponível`,noPrinterData:`Nenhum dado de impressora disponível`,noPrintData:`Nenhum dado de impressão disponível`,noPrintDataLast30Days:`Nenhum dado de impressão nos últimos 30 dias`,failureReasons:`Razões de Falha`,topFailureReasons:`Principais Razões de Falha`,failedPrintsCount:`{{failed}} / {{total}} impressões falharam`,lastWeekRate:`Última semana: {{rate}}%`,resetLayout:`Redefinir Layout`,recalculateCosts:`Recalcular Custos`,recalculateCostsHint:`Recalcular todos os custos do arquivo usando os preços atuais do filamento`,exportStats:`Exportar Estatísticas`,exportAsCsv:`Exportar como CSV`,exportAsExcel:`Exportar como Excel`,hiddenCount:`{{count}} Oculto`,exportDownloaded:`Exportação baixada`,exportFailed:`Falha na exportação`,layoutReset:`Layout redefinido`,recalculatedCosts:`Custos recalculados para {{count}} arquivos`,recalculateFailed:`Falha ao recalcular custos`,loadingStats:`Carregando estatísticas...`,noPermissionResetLayout:`Você não tem permissão para redefinir o layout`,noPermissionRecalculate:`Você não tem permissão para recalcular custos`,noPrintDataInRange:`Sem dados no período selecionado`,periodFilament:`Filamento usado`,periodCost:`Custo`,avgPerPrint:`Média por impressão`,usageOverTime:`Uso ao longo do tempo`,energyOverTime:`Energia ao longo do tempo`,filamentByWeight:`Peso`,printDuration:`Duração da impressão`,printerUtilization:`Utilização da impressora`,filamentSuccess:`Sucesso por material`,printHabits:`Hábitos de impressão`,printTimeOfDay:`Horário de impressão`,colorDistribution:`Distribuição de cores`,noColorData:`Nenhum dado de cor disponível`,records:`Recordes`,longestPrint:`Impressão mais longa`,heaviestPrint:`Impressão mais pesada`,mostExpensivePrint:`Mais cara`,busiestDay:`Dia mais movimentado`,successStreak:`Sequência de sucesso`,streakPrint:`impressão consecutiva`,streakPrints:`{{count}} impressões consecutivas`,printerStats:`Estatísticas da impressora`,hours:`horas`,avgPrints:`Méd. impressões`,noArchiveData:`Nenhum dado de impressão disponível`,filamentByTime:`Tempo`,avgWeight:`Méd. peso`,avgTime:`Méd. tempo`,filamentByPrints:`Impressões`,timeframe:{today:`Hoje`,"this-week":`Esta semana`,"this-month":`Este mês`,"last-7":`Últimos 7 dias`,"last-30":`Últimos 30 dias`,"last-90":`Últimos 90 dias`,"this-year":`Este ano`,"all-time":`Todo o período`,custom:`Personalizado`,from:`De`,to:`Até`},allUsers:`Todos os Usuários`,noUser:`Sem Usuário (Sistema)`,filterByUser:`Filtrar por Usuário`},maintenance:{title:`Manutenção`,overview:`Visão Geral`,allOk:`Todas as manutenções estão em dia`,dueCount:`{{count}} item pendente`,dueCount_plural:`{{count}} itens pendentes`,warningCount:`{{count}} aviso`,warningCount_plural:`{{count}} avisos`,totalPrintTime:`Tempo Total de Impressão`,nextMaintenance:`Próxima Manutenção`,nothingDue:`Nada pendente`,tasks:`Tarefas`,lastPerformed:`Última execução`,interval:`Intervalo`,hoursRemaining:`{{hours}}h restantes`,hoursOverdue:`{{hours}}h atrasadas`,markDone:`Marcar como Concluída`,performMaintenance:`Realizar Manutenção`,history:`Histórico`,noHistory:`Nenhum histórico de manutenção`,editPrintHours:`Editar Horas de Impressão`,currentHours:`Horas Atuais`,statusTab:`Status`,settingsTab:`Configurações`,overdueCount:`{{count}} atrasado`,dueSoonCount:`{{count}} prestes a vencer`,dueSoon:`Prestes a vencer`,allGood:`Tudo certo`,overdueBy:`Atrasado por {{duration}}`,dueIn:`Vence em {{duration}}`,timeLeft:`{{duration}} restantes`,day:`1 dia`,days:`{{count}} dias`,week:`1 semana`,weeks:`{{count}} semanas`,month:`1 mês`,months:`{{count}} meses`,year:`1 ano`,maintenanceTypes:`Tipos de Manutenção`,maintenanceTypesDescription:`Tipos de sistema e suas tarefas de manutenção personalizadas`,addCustomType:`Adicionar Tipo Personalizado`,restoreDefaults:`Restaurar Tarefas Padrão`,intervalType:`Tipo de Intervalo`,intervalValue:`Intervalo ({{type}})`,icon:`Ícone`,documentationLink:`Link da Documentação (opcional)`,assignToPrinters:`Atribuir a Impressoras`,selectAtLeastOnePrinter:`Selecione pelo menos uma impressora`,addType:`Adicionar Tipo`,custom:`Personalizado`,printHours:`Horas de Impressão`,calendarDays:`Dias de Calendário`,exampleName:`ex., Substituir Filtro HEPA`,viewDocumentation:`Ver documentação`,timeBasedInterval:`Intervalo baseado em tempo`,intervalOverrides:`Substituições de Intervalo`,intervalOverridesDescription:`Personalize os intervalos para impressoras específicas`,assignedToPrinters:`Atribuído a impressoras:`,noPrintersAssigned:`Nenhuma impressora atribuída`,addPrinterShort:`Adicionar:`,printersAssignedClick:`{{count}} impressora(s) atribuída(s) - clique para gerenciar`,removeFromPrinter:`Remover desta impressora`,types:{lubricateCarbonRods:`Lubricar Barras de Carbono`,lubricateRails:`Lubricar Trilhos Lineares`,cleanNozzle:`Limpar Bico/Hotend`,checkBelts:`Verificar Tensão das Correias`,cleanBuildPlate:`Limpar Plataforma de Impressão`,checkExtruder:`Verificar Engrenagens do Extrusor`,checkCooling:`Verificar Ventiladores de Resfriamento`,generalInspection:`Inspeção Geral`,cleanCarbonRods:`Limpar Barras de Carbono`,lubricateSteelRods:`Lubrificar Barras de Aço`,cleanSteelRods:`Limpar Barras de Aço`,cleanLinearRails:`Limpar Trilhos Lineares`,checkPtfeTube:`Verificar Tubo PTFE`,replaceHepaFilter:`Substituir Filtro HEPA`,replaceCarbonFilter:`Substituir Filtro de Carbono`,lubricateLeftNozzleRail:`Lubrificar Trilho do Bico Esquerdo`},maintenanceComplete:`Manutenção marcada como concluída`,typeUpdated:`Tipo de manutenção atualizado`,typeDeleted:`Tipo de manutenção excluído`,defaultsRestored:`Restauradas {{count}} tarefa(s) padrão`,printHoursUpdated:`Horas de impressão atualizadas`,printerAssigned:`Impressora atribuída`,printerRemoved:`Impressora removida`,deleteTypeConfirm:`Excluir "{{name}}"?`,deleteSystemTypeTitle:`Excluir tarefa de manutenção padrão?`,deleteSystemTypeMessage:`Tem certeza de que deseja excluir a tarefa de manutenção padrão "{{name}}"?`,noPermissionUpdate:`Você não tem permissão para atualizar itens de manutenção`,noPermissionPerform:`Você não tem permissão para realizar manutenção`,noPermissionEditTypes:`Você não tem permissão para editar tipos de manutenção`,noPermissionDeleteTypes:`Você não tem permissão para excluir tipos de manutenção`,noPermissionEditHours:`Você não tem permissão para editar horas de impressão`,noPermissionRemovePrinter:`Você não tem permissão para remover atribuições de impressora`,noPermissionAssignPrinter:`Você não tem permissão para atribuir impressoras`,noPermissionEditIntervals:`Você não tem permissão para editar intervalos`,configureSettings:`Configure tipos de manutenção e intervalos`},settings:{sliceEngine:`Motor de fatiamento`,sliceEngineSidecar:`Sidecar do servidor`,sliceEngineSidecarHint:`O fatiamento roda no servidor, no contêiner sidecar do fatiador.`,sliceEngineBrowser:`No navegador`,sliceEngineBrowserHint:`O fatiamento roda neste dispositivo, sem envolver o servidor.`,title:`Configurações`,general:`Geral`,tabs:{general:`Geral`,smartPlugs:`Tomadas Inteligentes`,sensors:`Sensores`,notifications:`Notificações`,queue:`Fluxo`,queueDispatch:`Fila e Dispatch`,queuePipelines:`Pipelines`,filament:`Filamento`,network:`Rede`,apiKeys:`Chaves API`,virtualPrinter:`Impressora Virtual`,failureDetection:`Detecção de Falhas`,users:`Autenticação`,backup:`Backup`,emailAuth:`Autenticação por Email`,ldap:`LDAP`,twoFa:`Autenticação 2FA`,oidc:`SSO / OIDC`,security:`Segurança`,spoolbuddy:`SpoolBuddy`},ldap:{title:`Autenticação LDAP`,enabledDesc:`A autenticação LDAP está ativada`,disabledDesc:`A autenticação LDAP está desativada`,disabledHint:`Configure e salve as configurações LDAP abaixo, depois ative.`,enabled:`Autenticação LDAP ativada`,disabled:`Autenticação LDAP desativada`,feature1:`Usuários podem fazer login com credenciais LDAP`,feature2:`A conta de administrador local permanece como fallback`,feature3:`Grupos LDAP são mapeados para grupos BamBuddy no login`,serverConfig:`Configuração do Servidor LDAP`,serverUrl:`URL do servidor`,serverUrlHint:`Use ldap:// para padrão ou ldaps:// para conexões SSL`,security:`Segurança`,securityHint:`StartTLS atualiza uma conexão simples para TLS. LDAPS usa TLS desde o início.`,bindDn:`Bind DN (conta de serviço)`,bindPassword:`Senha Bind`,searchBase:`Base DN de pesquisa`,userFilter:`Filtro de pesquisa de usuário`,userFilterHint:`{username} é substituído pelo nome de usuário. Use (uid={username}) para OpenLDAP.`,advanced:`Avançado`,autoProvision:`Provisionamento automático de usuários`,autoProvisionHint:`Criar automaticamente uma conta BamBuddy no primeiro login LDAP`,defaultGroup:`Grupo padrão`,defaultGroupNone:`— Nenhum (sem fallback) —`,defaultGroupHint:`Grupo de fallback atribuído quando um usuário LDAP se autentica mas não está em nenhum grupo LDAP mapeado. Deixe vazio para manter usuários não mapeados sem permissões.`,groupMapping:`Mapeamento de grupos (JSON)`,groupMappingHint:`Mapear DNs de grupos LDAP para grupos BamBuddy. Grupos disponíveis: `,testConnection:`Testar conexão`,settingsSaved:`Configurações LDAP salvas`,errors:{serverRequired:`URL do servidor LDAP é obrigatória`,searchBaseRequired:`Base DN de pesquisa é obrigatória`,enableAuthFirst:`Ative a autenticação primeiro`,configureLdapFirst:`Salve as configurações LDAP primeiro`}},email:{smtpSettings:`Configuração SMTP`,smtpHost:`Servidor SMTP`,smtpPort:`Porta SMTP`,security:`Segurança`,authentication:`Autenticação`,username:`Nome de Usuário`,password:`Senha`,fromEmail:`Email de Remetente`,fromName:`Nome de Remetente`,testConnection:`Testar Conexão SMTP`,testRecipient:`Email de Teste`,sendTest:`Enviar Email de Teste`,sending:`Enviando...`,save:`Salvar Configurações`,saving:`Salvando...`,advancedAuth:`Autenticação Avançada`,advancedAuthEnabled:`Autenticação Avançada está habilitada`,advancedAuthEnabledDesc:`Recursos de gerenciamento de usuários baseados em email estão ativos. Novos usuários receberão senhas geradas automaticamente por email, e os usuários podem redefinir suas senhas através do recurso de esqueci minha senha.`,advancedAuthDisabled:`Autenticação Avançada está desabilitada`,advancedAuthDisabledDesc:`Habilite a autenticação avançada para ativar recursos baseados em email para gerenciamento de usuários.`,enable:`Habilitar`,disable:`Desabilitar`,feature1:`Senhas são geradas automaticamente e enviadas por email para novos usuários`,feature2:`Usuários podem fazer login com nome de usuário ou email`,feature3:`Recurso de esqueci minha senha está disponível`,feature4:`Administradores podem redefinir senhas de usuários via email`,errors:{requiredFields:`Por favor, preencha todos os campos obrigatórios`,usernameRequired:`Nome de usuário é obrigatório quando a autenticação está habilitada`,enterTestEmail:`Por favor, insira um endereço de email de teste`,smtpServerAndEmail:`Por favor, preencha o servidor SMTP e o email de remetente antes de testar`,usernamePasswordRequired:`Nome de usuário e senha são obrigatórios quando a autenticação está habilitada`,configureSmtpFirst:`Por favor, configure e teste as configurações SMTP primeiro`,enableAuthFirst:`Por favor, habilite a autenticação primeiro para usar os recursos baseados em e-mail.`},success:{settingsSaved:`Configurações SMTP salvas com sucesso`},securityOptions:{starttls:`STARTTLS (Porta 587)`,ssl:`SSL/TLS (Porta 465)`,none:`Nenhuma (Porta 25)`},authOptions:{enabled:`Habilitado`,disabled:`Desabilitado`}},appearance:`Aparência`,notifications:`Notificações`,smartPlugs:`Tomadas Inteligentes`,spoolman:`Spoolman`,updates:`Atualizações`,language:`Idioma`,languageDescription:`Selecione seu idioma preferido`,theme:`Tema`,themeLight:`Claro`,themeDark:`Escuro`,themeSystem:`Sistema`,defaultView:`Visualização Padrão`,defaultViewDescription:`Página a ser exibida ao abrir o aplicativo`,checkForUpdates:`Verificar Atualizações`,autoUpdate:`Atualização Automática`,currentVersion:`Versão Atual`,latestVersion:`Última Versão`,upToDate:`Você está atualizado`,updateAvailable:`Atualização disponível`,notificationLanguage:`Idioma das Notificações`,notificationLanguageDescription:`Idioma para notificações push`,bedCooledThreshold:`Limite de Resfriamento da Cama`,bedCooledThresholdDescription:`Temperatura abaixo da qual a cama é considerada resfriada após uma impressão`,userNotificationsEnabled:`Notificações do Usuário`,userNotificationsEnabledDescription:`Ativa o menu de notificações do usuário e notificações por e-mail para eventos de impressão. Requer Autenticação Avançada.`,userNotificationsDisabledHint:`Ative a Autenticação Avançada para usar as notificações do usuário.`,notificationProviders:`Provedores de Notificação`,addProvider:`Adicionar Provedor`,editProvider:`Editar Provedor`,providerType:`Tipo de Provedor`,testNotification:`Testar Notificação`,testSuccess:`Notificação de teste enviada com sucesso`,testFailed:`Falha ao enviar notificação de teste`,quietHours:`Horas de Silêncio`,quietHoursDescription:`Não perturbe durante essas horas`,quietHoursStart:`Início`,quietHoursEnd:`Fim`,events:{title:`Eventos de Notificação`,printStart:`Impressão Iniciada`,printComplete:`Impressão Concluída`,printFailed:`Falha na Impressão`,printStopped:`Impressão Interrompida`,printProgress:`Marcos de Progresso`,printProgressDescription:`Notificar em 25%, 50%, 75%`,printerOffline:`Impressora Offline`,printerError:`Erro na Impressora`,filamentLow:`Filamento Baixo`,maintenanceDue:`Manutenção Pendente`,maintenanceDueDescription:`Notificar quando a manutenção for necessária`},smartPlug:{title:`Tomadas Inteligentes`,add:`Adicionar Tomada Inteligente`,edit:`Editar Tomada Inteligente`,name:`Nome`,ipAddress:`Endereço IP`,linkedPrinter:`Impressora Vinculada`,autoOn:`Ligar Automaticamente`,autoOnDescription:`Ligar quando a impressão começar`,autoOff:`Desligar Automaticamente`,autoOffDescription:`Desligar após a conclusão da impressão`,offDelay:`Atraso para Desligar`,offDelayMinutes:`Minutos após a impressão`,offDelayTemp:`Quando o bico estiver abaixo da temperatura`,currentState:`Estado Atual`,turnOn:`Ligar`,turnOff:`Desligar`},filamentTracking:`Rastreamento de Filamento`,filamentTrackingDesc:`Escolha como rastrear seus rolos de filamento. Você pode usar o inventário interno ou conectar a um servidor Spoolman externo.`,autoAddUnknownRfid:`Adicionar automaticamente carretéis RFID desconhecidos`,autoAddUnknownRfidDesc:`Cria automaticamente uma entrada de inventário quando um carretel com tag RFID desconhecido é detectado. Desligue se você pré-registra novos carretéis manualmente para evitar duplicatas.`,filamentChecks:`Verificações de filamento`,disableFilamentWarnings:`Desativar avisos de filamento`,disableFilamentWarningsDesc:`Não mostrar avisos sobre filamento insuficiente ao imprimir ou adicionar à fila`,preferLowestFilament:`Preferir filamento com menor resto`,preferLowestFilamentDesc:`Quando vários carretéis correspondem, usar o com menos filamento restante`,preferLowestFilamentBackupNote:`Só tem efeito quando o AMS Filament Backup está habilitado na impressora — caso contrário, a impressora não pode trocar para um segundo carretel quando o escolhido acabar.`,trackingModeBuiltIn:`Inventário Interno`,trackingModeBuiltInDesc:`Correspondência automática de RFID e rastreamento de uso incluídos`,trackingModeSpoolmanDesc:`Servidor de gerenciamento de filamento externo`,builtInFeatureRfid:`Detecta automaticamente rolos RFID da Bambu Lab no AMS`,builtInFeatureUsage:`Rastreia o consumo de filamento por impressão`,builtInFeatureCatalog:`Gerencia rolos, cores e perfis de fator K`,builtInFeatureThirdParty:`Rolos de terceiros podem ser atribuídos aos rolos do inventário`,amsSyncButton:`Sincronizar Pesos do AMS`,amsSyncTitle:`Sincronizar Pesos dos Rolos do AMS`,amsSyncMessage:`Isso substituirá todos os pesos dos rolos do inventário pelos valores atuais de % restante do AMS das impressoras conectadas. Use isso para recuperar dados de peso corrompidos. As impressoras devem estar online.`,amsSyncing:`Sincronizando...`,amsSyncSuccess:`{{synced}} rolo(s) sincronizado(s), {{skipped}} ignorado(s)`,amsSyncError:`Falha ao sincronizar pesos do AMS`,spoolmanAmsSyncButton:`Sincronizar pesos do Spoolman pelo AMS`,spoolmanAmsSyncTitle:`Sincronizar pesos dos rolos Spoolman pelo AMS`,spoolmanAmsSyncMessage:`Isso atualizará os pesos de todos os rolos Spoolman com base nos valores atuais de % restante do AMS das impressoras conectadas. As impressoras devem estar online.`,spoolmanAmsSyncing:`Sincronizando...`,spoolmanAmsSyncSuccess:`{{synced}} rolo(s) Spoolman sincronizado(s), {{skipped}} ignorado(s)`,spoolmanAmsSyncError:`Falha ao sincronizar pesos do Spoolman pelo AMS`,spoolmanAmsSyncErrorUnreachable:`Falha na sincronização (Spoolman inacessível)`,spoolmanAmsSyncErrorNotConfigured:`Falha na sincronização (Spoolman não configurado)`,spoolmanNotConfigured:`Spoolman não configurado`,spoolmanFilamentCatalogTitle:`Catálogo de filamentos Spoolman`,spoolmanFilamentCatalogDesc:`Nomes de filamentos e pesos tara da sua instância Spoolman. Nome e peso do carretel são editáveis aqui; todas as outras propriedades são gerenciadas diretamente no Spoolman.`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`URL do seu servidor Spoolman (por exemplo, http://localhost:7912)`,spoolmanConnected:`Conectado`,spoolmanDisconnected:`Desconectado`,status:`Status`,connect:`Conectar`,disconnect:`Desconectar`,howSyncWorks:`Como a Sincronização Funciona`,syncInfoRfidOnly:`Apenas rolos oficiais da Bambu Lab com RFID são sincronizados`,syncInfoAutoCreate:`Novos rolos são criados automaticamente no Spoolman na primeira sincronização`,syncInfoThirdPartySkipped:`Rolos não oficiais da Bambu Lab (terceiros, reabastecidos) são ignorados`,linkingExistingSpools:`Vinculando Rolos Existentes`,linkingExistingSpoolsDesc:`Para vincular rolos existentes do Spoolman ao seu AMS, passe o mouse sobre um slot do AMS e clique em "Vincular ao Spoolman".`,syncMode:`Modo de Sincronização`,syncModeAuto:`Automático`,syncModeManual:`Apenas Manual`,syncModeAutoDesc:`Os dados do AMS são sincronizados automaticamente quando alterações são detectadas`,syncModeManualDesc:`Somente sincronize quando acionado manualmente`,syncAmsData:`Sincronizar Dados do AMS`,syncAmsDataDesc:`Sincronize manualmente os dados do AMS da impressora com o Spoolman`,allPrinters:`Todas as Impressoras`,noDefaultPrinter:`Sem padrão (perguntar a cada vez)`,sidebarOrder:`Ordem da barra lateral`,saveThumbnails:`Salvar miniaturas`,captureFinishPhoto:`Capturar foto de conclusão`,noPrintersConfigured:`Nenhuma impressora configurada`,archiveMode:{always:`Sempre criar entrada de arquivo`,never:`Nunca criar entrada de arquivo`,ask:`Perguntar a cada vez`},checkForUpdatesLabel:`Verificar atualizações`,checkPrinterFirmware:`Verificar firmware da impressora`,includeBetaUpdates:`Incluir versões beta`,includeBetaUpdatesDesc:`Notificar sobre versões beta e pré-lançamento ao verificar atualizações`,localLogin:{disable:`Desativar login local com usuário/senha`,disableHint:`Quando ativado, somente provedores SSO podem fazer login. O LDAP não é afetado. Defina BAMBUDDY_LOCAL_LOGIN=true no servidor para manter um caminho de recuperação.`},enableRetry:`Habilitar tentativa`,homeAssistantDescription:`Controlar tomadas inteligentes via Home Assistant`,environmentManagedLabel:`(Gerenciado pelo Ambiente)`,autoEnabledViaEnv:`Habilitado automaticamente via variáveis de ambiente`,urlFromEnvReadOnly:`Valor definido pela variável de ambiente HA_URL (somente leitura)`,tokenFromEnvReadOnly:`Valor definido pela variável de ambiente HA_TOKEN (somente leitura)`,mqttConnectedTo:`Conectado a`,prometheusDescription:`Expor dados da impressora no formato Prometheus`,noSmartPlugsTitle:`Nenhuma tomada inteligente configurada`,noSmartPlugsDescription:`Adicione uma tomada inteligente baseada em Tasmota para monitorar o consumo de energia e automatizar o controle de energia.`,noProvidersTitle:`Nenhum provedor configurado`,noProvidersDescription:`Adicione um provedor para receber alertas.`,noTemplatesAvailable:`Nenhum modelo disponível. Reinicie o backend para gerar os modelos padrão.`,apiPermissionView:`Visualizar status da impressora e fila`,apiPermissionEdit:`Adicionar e remover itens da fila de impressão`,apiKeysEmptyTitle:`Nenhuma chave API`,apiKeysEmptyDescription:`Crie uma chave API para integrar com serviços externos.`,noUsersFound:`Nenhum usuário encontrado`,noGroupsFound:`Nenhum grupo encontrado`,noGroupsAvailable:`Nenhum grupo disponível`,passwordsDoNotMatch:`As senhas não coincidem`,systemGroupWarning:`Os nomes dos grupos do sistema não podem ser alterados`,authDisabledTitle:`Autenticação Desativada`,authDisabledFeature1:`Exigir login para acessar o sistema`,authDisabledFeature2:`Criar múltiplos usuários com permissões baseadas em grupos`,authDisabledFeature3:`Controlar acesso com mais de 50 permissões granulares`,userHasCreated:`Este usuário criou:`,userItemsQuestion:`O que você gostaria de fazer com esses itens?`,deleteUserConfirm:`Tem certeza de que deseja excluir este usuário?`,actionCannotBeUndone:`Esta ação não pode ser desfeita.`,addFirstSmartPlug:`Adicione sua primeira tomada inteligente`,providers:`Provedores`,log:`Registro`,testAll:`Testar tudo`,testResults:`Resultados do teste`,testPassedCount:`{{count}} aprovado`,testFailedCount:`{{count}} falhou`,messageTemplates:`Modelos de mensagem`,messageTemplatesDescription:`Personalize as mensagens de notificação para cada evento.`,apiKeys:`Chaves API`,apiKeysDescription:`Crie chaves API para integrações externas e webhooks.`,createKey:`Criar Chave`,apiKeyCreated:`Chave API criada com sucesso`,apiKeyCopyWarning:`Copie esta chave agora - ela não será exibida novamente!`,useInApiBrowser:`Usar no Navegador API`,apiKeyQrButton:`Código QR`,apiKeyQrTitle:`Escaneie para configurar`,apiKeyQrCaption:`Escaneie com seu app móvel para adicionar este servidor e a chave de API.`,apiKeyQrWarning:`Contém sua chave de API secreta — não compartilhe nem faça captura de tela onde outros possam ver.`,createNewApiKey:`Criar Nova Chave API`,keyName:`Nome da Chave`,keyNamePlaceholder:`e.g., Home Assistant, OctoPrint`,readStatus:`Status de Leitura`,readStatusDescription:`Visualizar status da impressora, fila, biblioteca, arquivos de impressão e pipelines do slicer`,manageQueue:`Gerenciar Fila`,manageQueueDescription:`Adicionar e remover itens da fila de impressão. Junto com "Gerenciar biblioteca", executar pipelines do slicer`,controlPrinter:`Controlar Impressora`,controlPrinterDescription:`Pausar, retomar e parar impressões`,manageLibrary:`Gerenciar biblioteca`,manageLibraryDescription:`Enviar, renomear, excluir e fatiar arquivos da biblioteca; importar modelos do MakerWorld. Junto com "Gerenciar Fila", executar pipelines do slicer`,manageInventory:`Gerenciar estoque`,manageInventoryDescription:`Criar, atualizar e excluir bobinas e registros de estoque. Necessário para quiosques SpoolBuddy (escaneamento NFC, leituras da balança, comandos de sistema do quiosque).`,manageMaintenance:`Gerenciar manutenção`,manageMaintenanceDescription:`Registrar manutenções concluídas, redefinir contadores, editar intervalos e gerenciar o catálogo de tipos de manutenção. Adequado a automações do Home Assistant que registram "limpei o bico" sem conceder controle mais amplo da impressora.`,manageArchives:`Gerenciar arquivos de impressão`,manageArchivesDescription:`Editar e excluir arquivos de impressão, incluindo a remoção de impressões antigas e da contribuição delas para as estatísticas. Adequado a automações que reduzem o histórico de impressão.`,manageProjects:`Gerenciar projetos`,manageProjectsDescription:`Criar, atualizar e excluir projetos e adicionar arquivos de impressão a eles. Adequado a automações que organizam as impressões em projetos.`,maintenanceBadge:`Manutenção`,archivesBadge:`Arquivos`,projectsBadge:`Projetos`,libraryBadge:`Biblioteca`,inventoryBadge:`Estoque`,cloudAccess:`Permitir acesso à nuvem`,cloudAccessDescription:`Lê predefinições e filamentos do Bambu Cloud em seu nome. Requer login no Bambu Cloud.`,cloudBadge:`Nuvem`,updateEnergyCost:`Atualizar preço da eletricidade`,updateEnergyCostDescription:`Permitir que esta chave envie POST de um novo preço por kWh para /settings/electricity-price. Útil para automações de tarifa dinâmica do Home Assistant (Tibber, Octopus, etc.). Este é o único campo de configuração gravável via API key.`,energyCostBadge:`Energia`,legacyKey:`Legado`,legacyKeyTooltip:`Criado antes da propriedade por usuário; recrie para acesso à nuvem`,unnamedKey:`Chave Sem Nome`,lastUsed:`Último uso`,read:`Ler`,control:`Controlar`,createFirstKey:`Crie sua primeira chave`,webhookEndpoints:`Endpoints de Webhook`,webhookApiKeyHint:`Use sua chave API no cabeçalho X-API-Key.`,webhook:{getAllStatus:`Obter status de todas as impressoras`,getSpecificStatus:`Obter status de uma impressora específica`,addToQueue:`Adicionar à fila de impressão`,pausePrint:`Pausar impressão`,resumePrint:`Retomar impressão`,stopPrint:`Parar impressão`},apiBrowser:`Navegador API`,apiBrowserDescription:`Explore e teste todos os endpoints de API disponíveis.`,apiKeyForTesting:`Chave API para Teste`,apiKeyPlaceholder:`Cole sua chave API aqui para testar endpoints autenticados...`,apiKeyHint:`Esta chave será enviada como cabeçalho X-API-Key nas solicitações.`,deleteApiKeyTitle:`Excluir Chave API`,deleteApiKeyMessage:`Tem certeza de que deseja excluir esta chave API? Quaisquer integrações usando esta chave deixarão de funcionar.`,deleteKey:`Excluir Chave`,amsDisplayThresholds:`Limiares de Exibição AMS`,amsThresholdsDescription:`Configure os limiares de cores para os indicadores de umidade e temperatura do AMS.`,humidity:`Umidade`,goodGreen:`Bom (verde)`,fairOrange:`Razoável (laranja)`,aboveFairBad:`Acima do limiar razoável mostra como vermelho (ruim)`,fairAlsoDryingThreshold:`Este limiar também é usado para acionar a secagem automática`,fairBelowDryingFloor:`A secagem automática não consegue atingir este valor: um AMS indica {{floor}}% ou mais enquanto aquece, então cada ciclo terminaria e recomeçaria de imediato. Aumente-o acima de {{floor}}% se usar a secagem automática.`,temperature:`Temperatura`,goodBlue:`Bom (azul)`,aboveFairHot:`Acima do limiar razoável mostra como vermelho (quente)`,tempAlarmThreshold:`Alarme acima de`,tempAlarmSeparateFromBand:`Apenas o limiar de alarme envia notificações — Bom e Razoável apenas colorem a exibição. Deixe vazio para alarmar no limiar razoável, como antes.`,tempAlarmMustBePositive:`Um limiar de 0 ou menos é ignorado — o alarme usa o limiar razoável.`,historyRetention:`Retenção de Histórico`,keepSensorHistory:`Manter histórico do sensor por`,historyRetentionDescription:`Dados antigos de umidade e temperatura serão automaticamente excluídos`,defaultPrintOptions:`Opções de impressão padrão`,defaultPrintOptionsDescription:`Defina valores padrão para opções de impressão. Podem ser alterados no diálogo de impressão.`,defaultBedLevelling:`Nivelamento da mesa`,defaultBedLevellingDesc:`Nivelar automaticamente a mesa antes da impressão`,defaultFlowCali:`Calibração de fluxo`,defaultFlowCaliDesc:`Calibrar fluxo de extrusão`,defaultVibrationCali:`Calibração de vibração`,defaultVibrationCaliDesc:`Reduzir artefatos de ringing`,defaultLayerInspect:`Inspeção da primeira camada`,defaultLayerInspectDesc:`Inspeção IA da primeira camada`,defaultTimelapse:`Timelapse`,defaultTimelapseDesc:`Gravar vídeo timelapse`,defaultNozzleOffsetCali:`Calibração de offset dos bicos`,defaultNozzleOffsetCaliDesc:`Calibrar offsets entre extrusores`,tempFanPresetsTitle:`Predefinições de temperatura e ventilador`,tempFanPresetsDescription:`Personalize os valores de seleção rápida exibidos nos popovers de temperatura e velocidade do ventilador do cartão da impressora. O botão Desligar sempre é exibido.`,tempFanPresetsNozzle:`Temperatura do bico`,tempFanPresetsBed:`Temperatura da mesa`,tempFanPresetsChamber:`Temperatura da câmara`,tempFanPresetsFan:`Velocidade do ventilador`,tempFanPresetsReset:`Restaurar padrões`,concurrentUploadsTitle:`Envios simultâneos`,concurrentUploadsDescription:`Quantas impressoras a fila pode abastecer com arquivos ao mesmo tempo. As impressoras recebem os arquivos lentamente (uma impressão grande pode levar vários minutos) e cada uma espera sua vez — portanto, em um parque maior, aumentar este valor evita que a última impressora de um lote tenha de esperar todas as transferências anteriores. Reduza-o se a sua rede ou o host do Bambuddy tiver dificuldade com transferências paralelas.`,concurrentUploadsLabel:`Impressoras abastecidas de uma vez`,concurrentUploadsHelp:`1 envia para uma impressora por vez (o comportamento anterior). O padrão é 4.`,staggeredStart:`Início escalonado`,staggeredStartDescription:`Tamanho de grupo e intervalo padrão ao escalonar inícios de lotes multi-impressora. Pode ser sobrescrito por lote no modal de impressão.`,preheatTitle:`Pré-aquecimento & Heat Soak`,preheatDescription:`Aquece a mesa (e a câmara, se suportada) e mantém a temperatura antes de iniciar cada impressão da fila. Útil para filamentos técnicos (PA, ABS) em impressoras sem aquecedor ativo de câmara — a mesa aquece a câmara por radiação enquanto o temporizador de soak roda. A temperatura alvo da mesa vem do arquivo de impressão; o comportamento da câmara depende do modelo da impressora.`,preheatEnabled:`Ativar pré-aquecimento & soak`,preheatEnabledDesc:`Quando desligado, as impressões na fila iniciam imediatamente. Cada item pode sobrescrever por impressão.`,preheatFilamentTargetsLabel:`Alvo da câmara por filamento (°C)`,preheatFilamentTargetsHint:`Bambuddy escolhe o alvo mais alto entre os slots AMS carregados. Uma impressão cujos slots derivam todos 0 — PLA, PETG, TPU, PVA — pula o preaquecimento por completo e começa imediatamente.`,preheatFilamentTargetsReset:`Redefinir para padrões`,preheatFilamentTargetsDefaultRow:`Outro / sem mapeamento`,preheatMaxWait:`Espera máx. (segundos)`,preheatMaxWaitHelp:`Teto da fase de aquecimento da câmara antes de passar ao soak.`,preheatSoak:`Soak (segundos)`,preheatSoakHelp:`Tempo de retenção após atingir o alvo ou expirar a espera máx.`,preheatHardwareTitle:`Comportamento por impressora:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E aquecem ativamente a câmara via M141. X1C/P2S leem a temperatura mas só aquecem a câmara por radiação da mesa. P1S/P1P/A1/A1 Mini não têm sensor de câmara — apenas o temporizador de soak se aplica.`,preheatPerItemDesc:`Aquece a mesa e a câmara antes desta impressão começar. Por padrão usa o interruptor global em Configurações → Workflow.`,preheatOverride_inherit:`Herdar`,preheatOverride_on:`Ligado`,preheatOverride_off:`Desligado`,calibrationMode_off:`Desligado`,calibrationMode_on:`Ligado`,calibrationMode_auto:`Auto`,preheatTargetOverride:`Sobrescrever alvo da câmara (°C, vazio = por filamento)`,preheatTargetOverrideHelp:`0 aquece a mesa e executa a estabilização sem a câmara. Em branco, uma impressão que não precisa de câmara pula o preaquecimento por completo.`,plateClear:`Confirmação de placa livre`,requirePlateClear:`Exigir confirmação de placa livre`,requirePlateClearDescription:`Quando ativado, o agendador aguarda uma confirmação de placa livre por impressora antes de iniciar impressões na fila em impressoras com trabalhos concluídos. Desativar isso também oculta o indicador de status da placa e o botão "Marcar placa como liberada" nos cartões das impressoras.`,keepBedWarm:`Manter a mesa aquecida entre impressões`,keepBedWarmDesc:`Enquanto aguarda a confirmação de placa limpa, mantém a mesa na temperatura de aquecimento definida abaixo para que a câmara continue quente — ou na temperatura da mesa da próxima impressão, se for maior. Aplica-se apenas quando a próxima impressão requer aquecimento de câmara (ASA, ABS, PA, PC, etc.). Requer a confirmação de placa limpa ativada.`,keepWarmBedTemp:`Temperatura da mesa em aquecimento (°C)`,keepWarmBedTempHelp:`Usado sempre que a mesa serve para aquecer a câmara: durante a manutenção aquecida e no pré-aquecimento quando o arquivo de impressão não traz temperatura da mesa. Uma temperatura maior vinda do arquivo sempre prevalece.`,keepWarmMaxMinutes:`Parar de manter aquecido após (minutos)`,keepWarmMaxMinutesHelp:`Se a placa não for liberada dentro desse tempo, os aquecedores são desligados em vez de ficarem ligados indefinidamente.`,gcodeInjection:`Injeção de G-code`,gcodeInjectionDescription:`Configure G-code personalizado para injetar no início e/ou no final das impressões para sistemas de impressão automática como Farmloop, SwapMod, AutoClear e Printflow 3D. Os snippets são configurados por modelo de impressora e aplicados quando "Injetar G-code" está ativado em um item da fila.`,gcodeInjectionNoPrinters:`Nenhuma impressora encontrada. Adicione impressoras para configurar snippets de G-code.`,gcodeStartLabel:`G-code inicial`,gcodeEndLabel:`G-code final`,gcodeStartPlaceholder:`G-code inserido antes do início da impressão...`,gcodeEndPlaceholder:`G-code adicionado após o término da impressão...`,staggerGroupSize:`Tamanho do grupo`,staggerGroupSizeHelp:`Impressoras para iniciar simultaneamente por grupo`,staggerInterval:`Intervalo (minutos)`,staggerIntervalHelp:`Atraso entre o início de cada grupo`,queueDrying:`Secagem Automática`,queueDryingDescription:`Secar automaticamente o filamento AMS quando a impressora estiver ociosa entre impressões na fila. Usa o limite de umidade acima.`,queueDryingEnabled:`Ativar secagem automática`,queueDryingEnabledDescription:`Iniciar secagem AMS automaticamente quando a impressora estiver ociosa e a umidade estiver acima do limite`,queueDryingBlock:`Aguardar conclusão da secagem`,queueDryingBlockDescription:`Bloquear a fila de impressão até a secagem terminar. Quando desativado, impressões têm prioridade.`,ambientDryingEnabled:`Secagem ambiente`,ambientDryingEnabledDescription:`Secar automaticamente o filamento em impressoras ociosas quando a umidade exceder o limite, mesmo sem impressões na fila.`,printDryingEnabled:`Continuar secagem durante a impressão`,printDryingEnabledDescription:`Permite que a secagem automática continue funcionando durante uma impressão em hardware compatível (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L com firmware recente). A temperatura de secagem é limitada automaticamente 5°C abaixo do valor de inatividade para proteger as bobinas.`,dryingPresets:`Predefinições de secagem`,dryingPresetsDescription:`Temperatura e duração por tipo de filamento. AMS 2 Pro usa temperaturas mais baixas, AMS-HT suporta temperaturas mais altas.`,dryingFilament:`Filamento`,humidityThresholds:`Limites de umidade`,humidityThresholdsDescription:`Gatilho de umidade por tipo de filamento para secagem automática e alarmes. Cargas mistas em um AMS usam o limite mais baixo.`,humidityThresholdCol:`Limite`,humidityThresholdDefault:`Padrão (tipos desconhecidos)`,printModal:`Modal de Impressão`,expandCustomMapping:`Expandir mapeamento personalizado por padrão`,expandCustomMappingDescription:`Ao imprimir em várias impressoras, mostrar o mapeamento AMS por impressora expandido`,authentication:`Autenticação`,authEnabledDescription:`Sua instância está protegida com autenticação de usuário`,authDisabledDescription:`Ative para exigir login e gerenciar o acesso dos usuários`,authDisabledMessage:`Ative a autenticação para criar contas de usuário, gerenciar permissões e proteger sua instância do Bambuddy.`,enableAuthentication:`Ativar Autenticação`,currentUser:`Usuário Atual`,changePassword:`Alterar Senha`,admin:`Administrador`,users:`Usuários`,addUser:`Adicionar Usuário`,groups:`Grupos`,addGroup:`Adicionar Grupo`,system:`Sistema`,noDescription:`Sem descrição`,userCount:`{{count}} usuários`,permissionCount:`{{count}} permissões`,createUser:`Criar Usuário`,username:`Nome de Usuário`,enterUsername:`Digite o nome de usuário`,password:`Senha`,enterPassword:`Digite a senha`,passwordRequirements:`Pelo menos 8 caracteres, com uma maiúscula, uma minúscula, um dígito e um caractere especial.`,confirmPassword:`Confirmar Senha`,confirmPasswordPlaceholder:`Confirme a senha`,viewReleaseOnGitHub:`Ver lançamento no GitHub`,turnAllPlugsOn:`Ligar todas as tomadas`,turnAllPlugsOff:`Desligar todas as tomadas`,clearNotificationLogs:`Limpar Logs de Notificação`,clearLogsMessage:`Isso excluirá permanentemente todos os logs de notificação com mais de 30 dias. Esta ação não pode ser desfeita.`,clearLogs:`Limpar Logs`,resetUiPreferences:`Redefinir Preferências de UI`,resetUiPreferencesMessage:`Isso redefinirá todas as preferências de UI para os padrões: ordem da barra lateral, tema, layout do painel, modos de exibição e preferências de classificação. Suas impressoras, arquivos e configurações do servidor NÃO serão afetados. A página será recarregada após a limpeza.`,resetPreferences:`Redefinir Preferências`,deleteGroupTitle:`Excluir Grupo`,deleteGroupMessage:`Tem certeza de que deseja excluir este grupo? Usuários neste grupo perderão essas permissões.`,deleteGroup:`Excluir Grupo`,disableAuthenticationTitle:`Desativar Autenticação`,disableAuthenticationMessage:`Tem certeza de que deseja desativar a autenticação? Isso tornará sua instância do Bambuddy acessível sem login. Todos os usuários permanecerão no banco de dados, mas a autenticação será desativada.`,disableAuthentication:`Desativar Autenticação`,configureBambuddy:`Configurar Bambuddy`,systemDefault:`Padrão do Sistema`,archiveSettings:`Configurações de Arquivo`,newWindow:`Nova Janela`,embeddedOverlay:`Sobreposição Incorporada`,preferredSlicer:`Fatiador Preferido`,preferredSlicerDescription:`Fatiador usado para fatiamento no aplicativo via sidecar da API`,openInSlicerLabel:`Abrir no fatiador`,openInSlicerInherit:`Mesmo do fatiador da API`,openInSlicerDescription:`Fatiador de desktop usado pelo botão 'Abrir no fatiador'. Mantenha em 'Mesmo do fatiador da API' para herdar, ou escolha um fatiador diferente para uso local.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev têm bugs CLI conhecidos que bloqueiam o fatiamento de muitos 3MFs criados pela Bambu — veja issues upstream #12426 (segfault em arquivos multi-extrusor pintados) e #13386 (rejeição de validação estrita de intervalos de parâmetros). Bambu Studio é recomendado até as correções upstream chegarem.`,useSlicerApi:`Usar API do fatiador`,useSlicerApiDescription:`Quando ativo, as ações "Slice" abrem o modal do fatiador interno e chamam o sidecar slicer-API. Quando inativo (padrão), redirecionam ao fatiador desktop via esquema URI.`,slicerCard:`Fatiador`,orcaslicerApiUrl:`OrcaSlicer sidecar URL`,bambuStudioApiUrl:`Bambu Studio sidecar URL`,slicerStallTimeout:`Tempo limite de inatividade do fatiador (minutos)`,slicerStallTimeoutDescription:`Desiste de um fatiamento apos esse tempo sem progresso do sidecar. Modelos pesados que continuam relatando progresso nunca sao interrompidos, por mais que demorem. Sidecars que nao relatam progresso usam este valor como limite de tempo total.`,slicerApiUrlDescription:`URL do contêiner sidecar slicer-API. Deixe em branco para usar SLICER_API_URL / BAMBU_STUDIO_API_URL.`,externalCameras:`Câmeras Externas`,costTracking:`Rastreamento de Custos`,printsOnly:`Apenas Impressões`,totalConsumption:`Consumo Total`,dataManagement:`Gerenciamento de Dados`,storageUsage:`Uso de Armazenamento`,storageUsageDescription:`Detalhamento do uso de dados por categoria`,storageUsageTotal:`Total`,storageUsageErrors:`Erros`,storageUsageOtherBreakdown:`Outros (inclui ativos estáticos, scripts e arquivos de configuração)`,storageUsageSystem:`Sistema`,storageUsageData:`Dados`,storageUsageUnavailable:`Informações de uso de armazenamento indisponíveis`,clearNotificationLogsDescription:`Excluir logs de notificação com mais de 30 dias`,resetUiPreferencesDescription:`Redefinir ordem da barra lateral, tema, modos de exibição e preferências de layout. Impressoras, arquivos e configurações não são afetados.`,enableHomeAssistant:`Ativar Home Assistant`,enableMqtt:`Ativar MQTT`,useTls:`Usar TLS`,enableMetricsEndpoint:`Ativar Endpoint de Métricas`,availableMetrics:`Métricas Disponíveis`,billingEnabled:`Habilitar cobrança`,billingEnabledDescription:`Cobrar dos usuários por impressões e habilitar recursos de financeiro`,printerKillSwitch:`Parada Automática de Impressão`,printerKillSwitchDescription:`Interromper imediatamente impressões não autorizadas`,financeBudgetReset:`Redefinir Orçamento Financeiro Mensal`,financeBudgetResetDay:`Dia de Redefinição`,financeBudgetResetDayHelp:`Para meses curtos, a redefinição utiliza o último dia do mês.`,financeBudgetResetTimezone:`Fuso Horário de Redefinição`,financeBudgetResetTimezoneHelp:`Der Budget-Fenster-Start wird in dieser Zeitzone berechnet.`,rebuildLedger:`Reconstruir razão da carteira`,rebuildLedgerStarted:`Reconstrução da razão iniciada`,rebuildLedgerConfirmTitle:`Reconstruir razão da carteira?`,rebuildLedgerConfirmMessage:`Isto reconstruirá a razão da carteira para reparar valores de saldo histórico. Execute isso apenas se você souber o que está fazendo.`,rebuildLedgerInProgress:`Iniciando reconstrução...`,editUser:`Editar Usuário`,deleteUserTitle:`Excluir Usuário`,groupName:`Nome do Grupo`,leaveEmptyForAnonymous:`Deixe vazio para anônimo`,leaveEmptyForNoAuth:`Deixe vazio para sem autenticação`,enterNewPassword:`Digite a nova senha`,confirmNewPassword:`Confirme a nova senha`,enterGroupName:`Digite o nome do grupo`,enterDescriptionOptional:`Digite a descrição (opcional)`,enterCurrentPassword:`Digite a senha atual`,enterNewPasswordMin6:`Digite a nova senha (mínimo 6 caracteres)`,toast:{keyCopied:`Chave copiada para a área de transferência`,copyFailed:`Falha ao copiar a chave`,keyAddedToBrowser:`Chave adicionada ao Navegador de API`,clearLogsFailed:`Falha ao limpar logs`,uiPreferencesReset:`Preferências de UI redefinidas. Atualizando...`,authDisabled:`Autenticação desativada com sucesso`,authDisableFailed:`Falha ao desativar a autenticação`,apiKeyCreated:`Chave de API criada`,apiKeyDeleted:`Chave de API excluída`,userCreated:`Usuário criado com sucesso`,userUpdated:`Usuário atualizado com sucesso`,userDeleted:`Usuário excluído com sucesso`,groupCreated:`Grupo criado com sucesso`,groupUpdated:`Grupo atualizado com sucesso`,groupDeleted:`Grupo excluído com sucesso`,fillRequiredFields:`Por favor, preencha todos os campos obrigatórios`,passwordsDoNotMatch:`As senhas não coincidem`,passwordTooShort:`A senha deve ter pelo menos 8 caracteres`,passwordNeedsUppercase:`A senha deve conter pelo menos uma letra maiúscula`,passwordNeedsLowercase:`A senha deve conter pelo menos uma letra minúscula`,passwordNeedsDigit:`A senha deve conter pelo menos um dígito`,passwordNeedsSpecial:`A senha deve conter pelo menos um caractere especial`,enterGroupName:`Por favor, insira um nome de grupo`,settingsSaved:`Configurações salvas`,noPermissionUpdate:`Você não tem permissão para alterar as configurações`,cameraSettingsSaved:`Configurações da câmera salvas`,enterCameraUrl:`Por favor, insira a URL da câmera`,passwordChanged:`Senha alterada com sucesso`,connectionFailed:`Falha na conexão`,testFailed:`Falha no teste`,cameraConnected:`Câmera conectada{{resolution}}`,cameraConnectedCoalesced:`Câmera conectada{{resolution}} (compartilhada com uma captura já em andamento)`},testConnection:`Testar Conexão`,catalog:{spoolCatalog:`Catálogo de Carretéis`,spoolCatalogDescription:`Pesos de carretéis vazios por marca/tipo. Usado para pesquisa automática de peso ao adicionar carretéis.`,searchCatalog:`Pesquisar no catálogo...`,addNewEntry:`Adicionar Nova Entrada`,namePlaceholder:`Nome (ex.: Bambu Lab - Plástico)`,weight:`Peso`,type:`Tipo`,default:`Padrão`,custom:`Personalizado`,noMatch:`Nenhuma entrada corresponde à sua pesquisa`,empty:`Nenhuma entrada no catálogo`,deleteEntry:`Excluir Entrada`,deleteConfirm:`Tem certeza de que deseja excluir "{{name}}"?`,resetCatalog:`Redefinir Catálogo`,resetConfirm:`Redefinir catálogo para os padrões? Isso removerá todas as entradas personalizadas.`,loadFailed:`Falha ao carregar o catálogo de carretéis`,nameWeightRequired:`Nome e peso são obrigatórios`,entryAdded:`Entrada adicionada`,addFailed:`Falha ao adicionar entrada`,entryUpdated:`Entrada atualizada`,updateFailed:`Falha ao atualizar entrada`,entryDeleted:`Entrada excluída`,deleteFailed:`Falha ao excluir entrada`,resetSuccess:`Catálogo redefinido para os padrões`,resetFailed:`Falha ao redefinir catálogo`,exported:`Exportadas {{count}} entradas`,imported:`Importadas {{added}} entradas ({{skipped}} ignoradas)`,importFailed:`Falha ao importar: formato JSON inválido`,exportTooltip:`Exportar catálogo para JSON`,importTooltip:`Importar catálogo de JSON`,resetTooltip:`Redefinir para os padrões`,selectedCount:`{{count}} selecionados`,deleteSelected:`Excluir Selecionados`,bulkDeleteConfirm:`Tem certeza de que deseja excluir {{count}} entradas?`,bulkDeleted:`{{count}} entradas excluídas`,bulkDeleteFailed:`Falha ao excluir entradas`,material:`Material`,spoolWeight:`Peso do carretel`,color:`Cor`,updateSpoolWeight:`Atualizar peso do carretel`,filamentUpdated:`Filamento atualizado`,filamentUpdateFailed:`Falha ao atualizar filamento`,filamentUpdateInvalid:`Dados de filamento inválidos`,keepExistingSpoolWeight:`Manter peso antigo para carretéis existentes`,keepExistingSpoolWeightDesc:`Os carretéis já criados com este tipo de filamento mantêm o peso tara antigo. Novos carretéis usam o valor atualizado.`,applyToAllSpools:`Aplicar a todos os carretéis`,applyToAllSpoolsDesc:`Todos os cálculos de peso para este tipo de filamento usam imediatamente o novo peso tara.`},colorCatalog:{title:`Catálogo de Cores`,description:`Cores de filamento por fabricante/material. Usado para pesquisa automática de cores ao adicionar carretéis.`,searchColors:`Pesquisar cores...`,allManufacturers:`Todos os fabricantes`,addNewColor:`Adicionar Nova Cor`,manufacturer:`Fabricante`,colorName:`Nome da Cor`,hex:`Hex`,materialOptional:`Material (opcional)`,showing:`Mostrando {{filtered}} de {{total}} cores`,noMatch:`Nenhuma cor corresponde à sua pesquisa`,empty:`Nenhuma cor no catálogo`,deleteColor:`Excluir Cor`,deleteConfirm:`Tem certeza de que deseja excluir "{{name}}"?`,resetCatalog:`Redefinir Catálogo de Cores`,resetConfirm:`Redefinir catálogo para os padrões? Isso removerá todas as cores personalizadas.`,sync:`Sincronizar`,starting:`Iniciando...`,syncTooltip:`Sincronizar do FilamentColors.xyz (2000+ cores, pode levar um minuto)`,loadFailed:`Falha ao carregar o catálogo de cores`,fieldsRequired:`Fabricante, nome da cor e cor hex são obrigatórios`,colorAdded:`Cor adicionada`,addFailed:`Falha ao adicionar cor`,colorUpdated:`Cor atualizada`,updateFailed:`Falha ao atualizar cor`,colorDeleted:`Cor excluída`,deleteFailed:`Falha ao excluir cor`,resetSuccess:`Catálogo de cores redefinido para os padrões`,resetFailed:`Falha ao redefinir catálogo`,syncUpToDate:`Já está atualizado ({{count}} cores verificadas)`,syncComplete:`Adicionadas {{added}} novas cores ({{skipped}} já existiam)`,syncError:`Erro de sincronização`,syncFailed:`Falha ao sincronizar do FilamentColors.xyz`,exported:`Exportadas {{count}} cores`,imported:`Importadas {{added}} cores ({{skipped}} ignoradas)`,importFailed:`Falha ao importar: formato JSON inválido`,selectedCount:`{{count}} selecionados`,deleteSelected:`Excluir Selecionados`,bulkDeleteConfirm:`Tem certeza de que deseja excluir {{count}} cores?`,bulkDeleted:`{{count}} cores excluídas`,bulkDeleteFailed:`Falha ao excluir cores`},dateFormat:`Formato de data`,dateFormatUs:`US (MM/DD/AAAA)`,dateFormatEu:`EU (DD/MM/AAAA)`,dateFormatIso:`ISO (AAAA-MM-DD)`,timeFormat:`Formato de hora`,timeFormat12:`12 horas (3:30 PM)`,timeFormat24:`24 horas (15:30)`,defaultPrinter:`Impressora padrão`,defaultPrinterDescription:`Pré-selecionar esta impressora para uploads, reimpressões e outras operações.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Use o layout da barra lateral para reordenar itens, restaurar a visibilidade e gerenciar links personalizados.`,setDefault:`Definir padrão`,sidebarOrderSetDefaultHint:`Definir padrão aplica a ordem atual do menu aos usuários que ainda não personalizaram o seu.`,sidebarDefaultSet:`Ordem padrão do menu foi definida.`,sidebarDefaultCleared:`Ordem padrão do menu removida.`,sidebarDefaultFailed:`Falha ao definir a ordem padrão do menu.`,reset:`Redefinir`,darkMode:`Modo escuro`,lightMode:`Modo claro`,active:`(ativo)`,background:`Fundo`,accent:`Destaque`,style:`Estilo`,bgNeutral:`Neutro`,bgWarm:`Quente`,bgCool:`Frio`,bgOled:`OLED Preto`,bgSlate:`Azul ardósia`,bgForest:`Verde floresta`,accentGreen:`Verde`,accentTeal:`Azul-petróleo`,accentBlue:`Azul`,accentOrange:`Laranja`,accentPurple:`Roxo`,accentRed:`Vermelho`,styleClassic:`Clássico`,styleGlow:`Brilhante`,styleVibrant:`Vibrante`,themeToggleHint:`Alternar entre modo escuro, claro e sistema usando o ícone na barra lateral.`,progressInTitle:`Progresso na aba`,progressInTitleDescription:`Mostra a porcentagem da impressão ativa e um anel de progresso na aba do navegador.`,autoArchivePrints:`Arquivar impressões automaticamente`,autoArchiveDescription:`Salvar automaticamente arquivos 3MF quando impressões forem concluídas`,saveThumbnailsDescription:`Extrair e salvar imagens de pré-visualização dos arquivos 3MF`,captureFinishPhotoDescription:`Tirar foto da câmera da impressora quando a impressão for concluída. Bambuddy grava um timelapse curto durante a impressão para que a foto possa ser obtida do momento antes da mesa descer; o arquivo do timelapse é mantido se você habilitou o timelapse para esta impressão, caso contrário ele é excluído automaticamente após a captura da foto.`,finishPhotoRestorePlate:`Elevar a mesa para a foto final`,finishPhotoRestorePlateDescription:`A impressora baixa a mesa cerca de 100 mm ao fim de uma impressão, deixando a peça pronta abaixo do enquadramento da câmera. O Bambuddy a eleva novamente até logo acima da última camada impressa, tira a foto e depois a baixa de novo. Ignorado quando a altura da impressão é desconhecida ou há outro trabalho na fila.`,ffmpegNotInstalled:`ffmpeg não instalado`,ffmpegRequired:`A captura de câmera requer ffmpeg. Instale via <brew>brew install ffmpeg</brew> (macOS) ou <apt>apt install ffmpeg</apt> (Linux).`,camera:`Câmera`,cameraViewMode:`Modo de visualização da câmera`,cameraOverlayDescription:`A câmera abre em uma sobreposição redimensionável na tela principal`,cameraWindowDescription:`A câmera abre em uma janela separada do navegador`,externalCamerasDescription:`Configure câmeras externas para substituir a câmera integrada da impressora. Suporta streams MJPEG, RTSP, snapshots HTTP e câmeras USB (V4L2). Quando habilitada, a câmera externa é usada para visualização ao vivo e fotos de conclusão.`,cameraPlaceholderUsb:`Caminho do dispositivo (/dev/video0)`,cameraPlaceholderUrl:`URL da câmera (rtsp://... ou http://...)`,cameraTypeMjpeg:`Stream MJPEG`,cameraTypeRtsp:`Stream RTSP`,cameraTypeSnapshot:`Snapshot HTTP`,cameraTypeUsb:`Câmera USB (V4L2)`,cameraSnapshotUrl:`URL de captura (opcional)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`URL de frame único usado para miniaturas de notificação, fotos de finalização, frames do timelapse por camada e detecção de mesa. Timelapse e detecção de mesa requerem cada um seu próprio toggle por impressora — esta URL é apenas a fonte de imagem que eles usam quando ativos. Deixe em branco para capturar do stream ao vivo acima. Útil para go2rtc (/api/frame.jpeg) e câmeras IP com endpoint de captura dedicado.`,cameraRotation:`Rotação`,test:`Testar`,connected:`Conectado`,disconnected:`Desconectado`,currency:`Moeda`,defaultFilamentCost:`Custo padrão do filamento (por kg)`,electricityCost:`Custo da eletricidade por kWh`,energyDisplayMode:`Modo de exibição de energia`,energyModePrintDescription:`O painel mostra a soma da energia usada durante as impressões`,energyModeTotalDescription:`O painel mostra a energia total dos plugues inteligentes`,fileManager:`Gerenciador de arquivos`,createArchiveEntry:`Criar entrada de arquivo ao imprimir`,createArchiveEntryDescription:`Ao imprimir pelo gerenciador de arquivos, criar opcionalmente uma entrada de arquivo`,lowDiskSpaceWarning:`Aviso de pouco espaço em disco`,lowDiskSpaceDescription:`Mostrar aviso quando o espaço livre em disco ficar abaixo deste limite`,printerFirmware:`Firmware da impressora`,checkFirmwareDescription:`Verificar atualizações de firmware da Bambu Lab`,bambuddySoftware:`Software Bambuddy`,autoCheckDescription:`Verificar automaticamente novas versões ao iniciar`,checkNow:`Verificar agora`,updateAvailableVersion:`Atualização disponível: v{{version}}`,releaseNotes:`Notas da versão`,updateViaDocker:`Atualizar via Docker Compose:`,composeDirectory:`Diretório do Compose`,composeDirectoryHint:`Diretório que contém seu docker-compose.yml. Deixe em branco para omitir o cd.`,copyUpdateCommand:`Copiar comando de atualização`,updateViaHomeAssistant:`As atualizações são gerenciadas pelo Supervisor do Home Assistant. Abra Configurações → Complementos → Bambuddy no Home Assistant para instalar a nova versão.`,updateViaWindowsInstaller:`Instalações no Windows são atualizadas executando o instalador novamente. Baixe a nova versão abaixo — seus dados, configurações e impressoras são preservados.`,downloadWindowsInstaller:`Baixar instalador da v{{version}}`,installUpdate:`Instalar atualização`,latestVersionRunning:`Você está usando a versão mais recente`,failedToCheckUpdates:`Falha ao verificar atualizações: {{error}}`,backupRestore:`Backup e Restauração`,backupRestoreDescription:`Exportar/importar configurações e configurar backup do GitHub`,goToBackup:`Ir para backup`,externalUrl:`URL externa`,externalUrlDescription:`A URL externa onde o Bambuddy está acessível. Usada para imagens de notificação e integrações externas.`,bambuddyUrl:`URL do Bambuddy`,externalUrlHint:`Inclua protocolo e porta (ex: http://192.168.1.100:8000)`,ftpRetry:`Tentativa FTP`,ftpRetryDescription:`Tentar novamente operações FTP quando o WiFi da impressora é instável. Aplica-se a downloads 3MF, uploads de impressão, downloads de timelapse e atualizações de firmware.`,autoRetryDescription:`Tentar novamente automaticamente operações FTP que falharam`,retryAttempts:`Tentativas de reenvio`,retryDelay:`Atraso entre tentativas`,connectionTimeout:`Tempo limite de conexão`,time_one:`{{count}} vez`,time_other:`{{count}} vezes`,second_one:`{{count}} segundo`,second_other:`{{count}} segundos`,nSeconds:`{{count}} segundos`,increaseForWeakWifi:`Aumente para impressoras com WiFi fraco`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Conecte ao Home Assistant para controlar plugues inteligentes via API REST do HA. Suporta entidades switch, light, input_boolean e script.`,homeAssistantUrl:`URL do Home Assistant`,longLivedAccessToken:`Token de acesso de longa duração`,haTokenHint:`Crie um token no HA: Perfil → Tokens de acesso de longa duração → Criar token`,connectionSuccessful:`Conexão bem-sucedida`,connectionFailed:`Falha na conexão`,haConnectionSuccess:`Conectado com sucesso ao Home Assistant.`,haConnectionFailed:`Falha ao conectar ao Home Assistant.`,mqttPublishing:`Publicação MQTT`,mqttDescription:`Publique eventos do BamBuddy para um broker MQTT externo para integração com Node-RED, Home Assistant e outros sistemas de automação.`,mqttEnableDescription:`Publicar eventos no broker MQTT externo`,brokerHostname:`Hostname do broker`,port:`Porta`,usernameOptional:`Usuário (opcional)`,passwordOptional:`Senha (opcional)`,topicPrefix:`Prefixo do tópico`,topicPrefixHint:`Os tópicos serão: {{prefix}}/printers/<serial>/status, etc.`,prometheusMetrics:`Métricas Prometheus`,prometheusEndpointDescription:`Expor métricas da impressora em <code>/api/v1/metrics</code> para monitoramento Prometheus/Grafana.`,bearerTokenOptional:`Token Bearer (opcional)`,bearerTokenHint:`Se definido, as requisições devem incluir <code>Authorization: Bearer <token></code>`,metricsConnectionStatus:`Status da conexão`,metricsPrinterState:`Estado da impressora (idle/printing/etc)`,metricsPrintProgress:`Progresso da impressão 0-100%`,metricsBedTemp:`Temperatura da mesa`,metricsNozzleTemp:`Temperatura do bico`,metricsPrintsTotal:`Total de impressões por resultado`,metricsMore:`...e mais (camadas, ventoinhas, fila, uso de filamento)`,smartPlugsDescription:`Conecte plugues inteligentes (Tasmota ou Home Assistant) para automatizar o controle de energia e rastrear o consumo energético das suas impressoras.`,allOn:`Ligar todos`,allOff:`Desligar todos`,addSmartPlug:`Adicionar plugue inteligente`,energySummary:`Resumo de energia`,currentPower:`Potência atual`,plugsOnline:`{{reachable}}/{{total}} plugues online`,today:`Hoje`,yesterday:`Ontem`,total:`Total`,enablePlugsForSummary:`Habilite os plugues para ver o resumo de energia`,addNotificationProvider:`Adicionar`,systemBadge:`(Sistema)`,creating:`Criando...`,changing:`Alterando...`,deleteUserAndItems:`Excluir usuário E seus itens`,deleteUserKeepItems:`Excluir usuário, manter itens (ficarão sem dono)`,ok:`OK`,twoFa:{totpTitle:`App Autenticador (TOTP)`,totpDesc:`Use um app como Google Authenticator, Aegis ou Authy.`,emailOtpTitle:`OTP por e-mail`,emailOtpDesc:`Envie um código único para {{email}} ao fazer login.`,emailOtpNoEmail:`Adicione um endereço de e-mail à sua conta para ativar este método.`,addEmailFirst:`Sua conta não tem endereço de e-mail. Peça a um administrador para adicionar um.`,setupTotp:`Configurar App Autenticador`,setupAuthApp:`Configurar App Autenticador`,setupInstructions:`Escaneie o código QR com seu app autenticador e confirme com um código.`,manualEntry:`Não consegue escanear? Digite este segredo manualmente:`,scannedContinue:`Código escaneado — continuar`,enterCodeToConfirm:`Digite o código de 6 dígitos do seu app autenticador para confirmar.`,activate:`Ativar`,disableTotp:`Desativar Autenticador`,disableConfirmHint:`Digite um código TOTP válido ou um código de backup para desativar o autenticador.`,totpDisabled:`App autenticador desativado.`,emailOtpEnabled:`OTP por e-mail ativado.`,emailOtpDisabled:`OTP por e-mail desativado.`,smtpRequired:`Por favor, configure e teste as configurações SMTP primeiro.`,invalidCode:`Código inválido. Por favor, tente novamente.`,enableEmailOtp:`Ativar OTP por e-mail`,disableEmailOtp:`Desativar OTP por e-mail`,emailSetupEnterCode:`Um código de verificação foi enviado para o seu endereço de e-mail. Digite-o abaixo para confirmar que você possui esta caixa de entrada.`,verifyAndEnable:`Verificar e Ativar`,emailDisablePasswordHint:`Digite a senha da sua conta para confirmar a desativação do OTP por e-mail.`,passwordPlaceholder:`Digite sua senha`,backupCodesTitle:`Salve seus códigos de backup`,backupCodesWarning:`Guarde estes códigos em lugar seguro. Cada código só pode ser usado uma vez.`,backupCodesRemaining:`{{count}} códigos de backup restantes`,savedCodes:`Códigos salvos`,regenBackup:`Regenerar códigos de backup`,regenBackupHint:`Digite seu código TOTP atual para gerar 10 novos códigos de backup.`,newBackupCodes:`Novos códigos de backup`,linkedAccounts:`Contas SSO vinculadas`,linkedAccountsDesc:`Estes provedores de identidade externos estão vinculados à sua conta.`,oidcUnlinked:`Conta desvinculada.`},sessionPolicy:{title:`Política de sessão`,description:`Duração máxima da sessão para novos logins de usuário. Tokens já emitidos mantêm sua expiração original.`,preset24h:`24 horas`,preset7d:`7 dias`,preset30d:`30 dias`,customHoursLabel:`Duração personalizada da sessão em horas`,hoursSuffix:`horas`,warning:`Sessões mais longas reduzem a proteção de logout automático. Recomendado apenas para implantações de usuário único confiáveis.`},oidc:{title:`Provedores SSO / OIDC`,desc:`Configure provedores OpenID Connect para login único.`,addProvider:`Adicionar provedor`,newProvider:`Novo provedor`,empty:`Nenhum provedor OIDC configurado ainda.`,created:`Provedor criado.`,updated:`Provedor atualizado.`,deleted:`Provedor excluído.`,refreshIcon:`Atualizar ícone`,removeIcon:`Remover ícone`,iconRefreshed:`Ícone atualizado.`,iconRemoved:`Ícone removido.`,iconFetchFailed:`Não foi possível obter o ícone da URL do provedor.`,deleteTitle:`Excluir provedor`,deleteMessage:`Excluir "{{name}}"? Todas as contas vinculadas serão desconectadas.`,form:{name:`Nome de exibição`,issuerUrl:`URL do emissor`,clientId:`ID do cliente`,clientSecret:`Client secret`,scopes:`Escopos`,iconUrl:`URL do ícone (opcional)`,enabled:`Ativado`,autoCreate:`Criar usuários automaticamente`,autoCreateDesc:`Cria automaticamente uma conta local no primeiro login.`,autoLink:`Vincular contas existentes automaticamente`,autoLinkDesc:`Vincula contas locais existentes por e-mail no primeiro login.`,secretHint:`deixe em branco para manter`,secretPlaceholder:`novo segredo`,emailClaim:`Claim de e-mail`,emailClaimDesc:`Claim JWT usado como identidade de e-mail. Use 'preferred_username' ou 'upn' para Azure Entra ID (que não envia email_verified). Use apenas nomes de claim confiáveis.`,emailClaimPlaceholder:`e-mail`,emailClaimCustomClaimAutoLinkWarning:`Claims personalizadas são seguras para vinculação automática apenas quando o valor é administrado pelo tenant (ex. Azure Entra ID upn / preferred_username). Não ative a vinculação automática se seu IdP permite que usuários auto-declarem essa claim.`,requireEmailVerified:`Exigir e-mail verificado`,requireEmailVerifiedDesc:`Aceitar o claim de e-mail apenas quando o provedor o marcar como verificado.`,requireEmailVerifiedWarning:`Aviso: o e-mail será aceito sem verificação. Use apenas com provedores confiáveis.`,requireEmailVerifiedAutoLink:`Desabilite o vínculo automático primeiro para alterar esta configuração.`,defaultGroup:`Grupo padrão`,defaultGroupDesc:`Grupo atribuído aos usuários criados automaticamente. Retorna a Viewers se não definido.`,defaultGroupViewersFallback:`Viewers (padrão)`,autologin:`Login automático`,autologinDesc:`Redirecionar visitantes não autenticados diretamente para este provedor. Apenas um provedor pode ter esta marcação.`}},encryption:{title:`Status de criptografia MFA`,enabledFromEnv:`Criptografia em repouso ativa (chave da variável de ambiente MFA_ENCRYPTION_KEY)`,enabledFromFile:`Criptografia em repouso ativa (chave do diretório de dados)`,enabledGenerated:`Criptografia em repouso ativa com chave auto-gerada`,notConfigured:`Criptografia em repouso não configurada`,notConfiguredDesc:`Os segredos TOTP e client_secrets OIDC são armazenados em texto plano. Defina MFA_ENCRYPTION_KEY ou reinicie o Bambuddy com um diretório de dados gravável para gerar automaticamente.`,allEncrypted:`Todos os segredos MFA são criptografados em repouso.`,legacyRowsLabel:`Linhas legadas em texto plano`,encryptedRowsLabel:`Linhas criptografadas`,legacyRowsWarning:`{{count}} linha(s) legada(s) em texto plano detectada(s). Salve novamente o provedor OIDC ou registre novamente o autenticador do usuário para migrar ao armazenamento criptografado.`,backupHint:`A chave auto-gerada é armazenada em DATA_DIR/.mfa_encryption_key e incluída em ZIPs de backup locais. Mantenha seus backups seguros ou defina MFA_ENCRYPTION_KEY explicitamente.`,decryptionBrokenTitle:`Chave de criptografia ausente`,decryptionBrokenError:`{{count}} registro(s) criptografado(s) não podem ser descriptografados pois a chave de criptografia não está mais disponível. Restaure o MFA_ENCRYPTION_KEY anterior ou DATA_DIR/.mfa_encryption_key para recuperar.`,migrationErrorWarning:`{{count}} linha(s) antiga(s) não puderam ser recriptografadas na inicialização. Verifique os logs do servidor e reinicie o Bambuddy para tentar novamente.`},spoolbuddy:{infoTitle:`Dispositivos SpoolBuddy`,infoBody:`Os kiosks SpoolBuddy se registram automaticamente via heartbeat. Cancele o registro de um dispositivo aqui se não estiver mais em uso ou se um duplicado obsoleto foi deixado por uma falha do daemon.`,duplicatesTitle:`{{count}} dispositivos registrados`,duplicatesBody:`Apenas o primeiro dispositivo registrado é usado pela interface do kiosk. Se algum destes for um duplicado obsoleto após uma falha, cancele seu registro — um dispositivo online se registrará novamente no próximo heartbeat.`,empty:`Nenhum dispositivo SpoolBuddy registrado ainda.`,online:`Online`,offline:`Offline`,unregister:`Cancelar registro`,unregisterSuccess:`Dispositivo removido`,unregisterError:`Falha ao cancelar registro`,confirmTitle:`Cancelar registro do dispositivo SpoolBuddy?`,confirmBody:`Isso removerá "{{hostname}}" ({{deviceId}}) do banco de dados. Se o dispositivo estiver online, ele se registrará novamente no próximo heartbeat.`,ipAddress:`Endereço IP`,firmware:`Firmware`,lastSeen:`Visto pela última vez`,daemonUptime:`Tempo ativo do daemon`,systemUptime:`Tempo ativo do sistema`,never:`nunca`,nfc:`NFC`,scale:`Balança`,cpuTemp:`Temp. CPU`,cpuLoad:`Carga da CPU`,memory:`Memória`,disk:`Disco`,update:`Atualizar`,updateConfirmTitle:`Atualizar daemon do Spoolbuddy?`,updateConfirmBody:`Iniciar uma atualização de software em "{{hostname}}"? O daemon será reiniciado após a aplicação.`,restartBrowser:`Reiniciar navegador`,restartBrowserConfirmTitle:`Reiniciar o navegador do kiosk?`,restartBrowserConfirmBody:`Reiniciar o navegador do kiosk em "{{hostname}}"? A tela ficará em branco brevemente.`,restartDaemon:`Reiniciar daemon`,restartDaemonConfirmTitle:`Reiniciar daemon do Spoolbuddy?`,restartDaemonConfirmBody:`Reiniciar o daemon do Spoolbuddy em "{{hostname}}"? O dispositivo ficará offline por alguns segundos.`,reboot:`Reiniciar`,rebootConfirmTitle:`Reiniciar o dispositivo?`,rebootConfirmBody:`Reiniciar "{{hostname}}"? O dispositivo ficará offline por cerca de um minuto.`,shutdown:`Desligar`,shutdownConfirmTitle:`Desligar o dispositivo?`,shutdownConfirmBody:`Desligar "{{hostname}}"? Será necessário acesso físico para ligá-lo novamente.`,commandConfirm:`Confirmar`,commandQueued:`Comando enfileirado`,commandError:`Falha ao enviar comando`},pipelineLimits:{title:`Limites de pipelines do slicer`,maxCopiesLabel:`Cópias máximas por execução`,maxCopiesDesc:`Limite superior de cópias que operadores podem solicitar ao executar uma pipeline. O limite rígido no lado do servidor é 1000.`},pipelines:{title:`Pipelines do Slicer`,subtitle:`Pacotes de predefinições reutilizáveis (impressora + processo + filamentos + tipo de mesa). Salve um a partir do diálogo Cortar e aplique com um clique no próximo arquivo.`,loading:`Carregando pipelines…`,loadError:`Não foi possível carregar as pipelines.`,confirmDelete:`Excluir esta pipeline? Isso não pode ser desfeito.`,staleWarning:`Uma ou mais predefinições referenciadas não existem mais. Salve novamente esta pipeline a partir do diálogo Cortar para corrigir.`,empty:{title:`Ainda não há pipelines.`,howto:`Abra o diálogo Cortar em qualquer arquivo, escolha impressora / processo / filamentos / mesa e clique em "Salvar como pipeline". Suas pipelines salvas aparecerão aqui.`},field:{name:`Nome da pipeline`,description:`Descrição`,targetPrinter:`Impressora de destino`,noTarget:`— Sem destino —`,targetKind:`Tipo de destino`,targetKindSpecific:`Impressora específica`,targetKindClass:`Classe de impressora`,targetModelClass:`Modelo de impressora`,fanoutStrategy:`Estratégia de distribuição`,fanout:{max_parallel:`Máximo paralelo — distribuir em qualquer impressora ociosa compatível`,round_robin:`Round robin — alternar entre impressoras elegíveis`,fill_one_first:`Encher uma primeiro — fixar todas as cópias em uma impressora`},fanoutShort:{max_parallel:`paralelo`,round_robin:`round robin`,fill_one_first:`primeiro um`}},action:{save:`Salvar`,cancel:`Cancelar`,rename:`Renomear`,delete:`Excluir`},slot:{printer:`Impressora`,process:`Processo`,filament:`Filamento`,filamentN:`Filamento {{n}}`,filamentAll:`Todos os {{n}} slots`,bed:`Mesa`},group:{profiles:`Perfis`,filaments:`Filamentos`},searchPlaceholder:`Buscar pipelines…`,filterTargetType:`Filtrar por tipo de destino`,filterTarget:`Filtrar por destino`,filter:{all:`Todos os destinos`,noTarget:`Sem destino`,count:`{{shown}} / {{total}}`,noMatches:`Nenhuma pipeline corresponde aos filtros atuais.`},toast:{saved:`Pipeline salva`,saveFailed:`Falha ao salvar`,deleted:`Pipeline excluída`,deleteFailed:`Falha ao excluir`},noTargetHint:`Defina uma impressora de destino para executar`,noTargetWarning:`Defina uma impressora de destino antes de executar esta pipeline.`,runs:{lastRun:`Última execução`,status:{queued:`na fila`,slicing:`cortando`,dispatching:`enviando`,in_progress:`imprimindo`,completed:`concluída`,failed:`falhou`,partial_failure:`falha parcial`,cancelled:`cancelada`}}}},notification:{printStarted:{title:`Impressão Iniciada`,body:`{{printer}}: {{filename}} iniciou a impressão`},printCompleted:{title:`Impressão Concluída`,body:`{{printer}}: {{filename}} foi concluída com sucesso`},printFailed:{title:`Falha na Impressão`,body:`{{printer}}: {{filename}} falhou`},printStopped:{title:`Impressão Interrompida`,body:`{{printer}}: {{filename}} foi interrompida`},printProgress:{title:`Progresso da Impressão`,body:`{{printer}}: {{filename}} está {{percent}}% concluída`},printerOffline:{title:`Impressora Offline`,body:`{{printer}} está offline`},printerError:{title:`Erro na Impressora`,body:`{{printer}} – {{error}}`},filamentLow:{title:`Filamento Baixo`,body:`{{printer}}: O filamento está acabando`},maintenanceDue:{title:`Manutenção Pendente`,body:`{{printer}}: {{items}} precisam de atenção`}},errors:{generic:`Algo deu errado`,networkError:`Erro de rede. Por favor, verifique sua conexão.`,notFound:`Não encontrado`,unauthorized:`Não autorizado`,serverError:`Erro no servidor`,validationError:`Por favor, verifique sua entrada`,printerConnectionFailed:`Falha ao conectar à impressora`,saveFailed:`Falha ao salvar alterações`,deleteFailed:`Falha ao excluir`,loadFailed:`Falha ao carregar dados`},hmsErrors:{title:`Erros - {{name}}`,noErrors:`Nenhum erro`,viewOnWiki:`Ver no Bambu Lab Wiki`,mqttVerifyFailedRemedy:`Ative o Modo Desenvolvedor na impressora, reinicie a impressora e inicie o trabalho novamente.`,unknownCode:`Código HMS desconhecido — consulte o wiki da Bambu Lab para mais detalhes.`,clearInstructions:`Limpe os erros na impressora para descartá-los aqui.`,clearErrors:`Limpar Erros`,clearSuccess:`Erros HMS limpos`,clearFailed:`Falha ao limpar erros HMS`,actionSuccess:`Ação enviada à impressora`,actionFailed:`Falha ao enviar ação`,runoutExpectedSlot:`O filamento acabou em {{ranOut}}. A impressora agora aguarda filamento compatível em {{expected}}. Insira uma bobina em {{expected}} e selecione Tentar novamente.`,runoutExpectedSlotOnly:`A impressora está aguardando filamento compatível em {{expected}}. Insira uma bobina ali e selecione Tentar novamente.`,runoutSlotUnknown:`O filamento acabou e a impressão está pausada. O Bambuddy não conseguiu determinar qual slot a impressora agora espera — verifique a tela da impressora para o slot solicitado.`,actions:{RESUME_PRINTING:`Retomar impressão`,RESUME_PRINTING_DEFECTS:`Retomar (defeitos aceitáveis)`,RESUME_PRINTING_PROBELM_SOLVED:`Retomar (problema resolvido)`,STOP_PRINTING:`Parar impressão`,CHECK_ASSISTANT:`Ver assistente`,FILAMENT_EXTRUDED:`Filamento extrudado, continuar`,RETRY_FILAMENT_EXTRUDED:`Ainda não extrudado, tentar novamente`,CONTINUE:`Finalizado, continuar`,LOAD_VIRTUAL_TRAY:`Carregar filamento`,OK_BUTTON:`OK`,FILAMENT_LOAD_RESUME:`Filamento carregado, retomar`,JUMP_TO_LIVEVIEW:`Ver ao vivo`,NO_REMINDER_NEXT_TIME:`Não lembrar da próxima vez`,REFRESH_NOZZLE:`Verificar novamente`,IGNORE_NO_REMINDER_NEXT_TIME:`Ignorar e não lembrar`,IGNORE_RESUME:`Ignorar e retomar`,PROBLEM_SOLVED_RESUME:`Problema resolvido, retomar`,TURN_OFF_FIRE_ALARM:`Entendido, desligar alarme de incêndio`,RETRY_PROBLEM_SOLVED:`Tentar novamente (problema resolvido)`,CANCLE:`Cancelar`,STOP_DRYING:`Parar secagem`,PROCEED:`Prosseguir`,OK_JUMP_RACK:`OK`,ABORT:`Abortar`,DISABLE_PURIFICATION:`Desativar purificação para esta impressão`,DONT_REMIND_NEXT_TIME:`Não me lembrar`,DBL_CHECK_CANCEL:`Cancelar`,DBL_CHECK_DONE:`Concluído`,DBL_CHECK_RETRY:`Tentar novamente`,DBL_CHECK_RESUME:`Retomar`,DBL_CHECK_OK:`Confirmar`,REMOVE_CLOSE_BTN:`Fechar`}},mqttDebug:{title:`MQTT Log de Depuração`,searchPlaceholder:`Pesquisar tópico ou payload...`,noMessages:`Nenhuma mensagem registrada ainda`,startLoggingHint:`Clique em "Iniciar Registro" para começar a capturar mensagens MQTT`,noMessagesMatch:`Nenhuma mensagem corresponde ao seu filtro`,adjustFilterHint:`Tente ajustar seus critérios de pesquisa ou filtro`,incoming:`Entrada`,outgoing:`Saída`,loggingStopped:`Registro interrompido`,loggingActive:`Registro ativo - as mensagens serão atualizadas automaticamente`,startLogging:`Iniciar Registro`,stopLogging:`Parar Registro`,clearLog:`Limpar Registro`,topic:`ópico`,timestamp:`Carimbo de Data/Hora`,direction:`Direção`,all:`Todos`},printerFiles:{zipStarted_one:`Download ZIP iniciado para {{count}} arquivo`,zipStarted_other:`Download ZIP iniciado para {{count}} arquivos`,zipPartial:`Download ZIP iniciado com {{successful}} de {{total}} arquivos; não foi possível obter os demais`,downloadFailed:`Falha no download: {{error}}`,unknownError:`Erro desconhecido`,shiftSelectHint:`Shift+clique para selecionar um intervalo`,selectFile:`Selecionar {{name}}`,deselectFile:`Desmarcar {{name}}`,title:`Gerenciador de Arquivos`,storageUsed:`Usado:`,storageFree:`Livre:`,filterPlaceholder:`Filtrar arquivos...`,deleteButton:`Excluir`,deleteFiles:`Excluir {{count}} arquivos`,deleteFileConfirm:`Excluir "{{name}}"? Isso não pode ser desfeito.`,deleteFilesConfirm:`Excluir {{count}} arquivos selecionados? Isso não pode ser desfeito.`,noFiles:`Nenhum arquivo na impressora`,printerUnavailable:`O serviço de arquivos da impressora está indisponível. Tente novamente quando a impressora estiver acessível.`,loadingFiles:`Carregando arquivos...`,failedToLoad:`Falha ao carregar arquivos`,toast:{filesDeleted:`Arquivos excluídos: {{count}}`,deleteFailed:`Falha ao excluir: {{error}}`}},confirm:{delete:`Tem certeza de que deseja excluir isso?`,unsavedChanges:`Você tem alterações não salvas. Tem certeza de que deseja sair?`,clearQueue:`Tem certeza de que deseja limpar a fila?`},login:{title:`Login Bambuddy`,subtitle:`Faça login na sua conta`,username:`Nome de usuário`,usernamePlaceholder:`Digite seu nome de usuário`,usernameOrEmail:`Nome de usuário ou Email`,usernameOrEmailPlaceholder:`Nome de usuário ou Email`,password:`Senha`,passwordPlaceholder:`Digite sua senha`,signIn:`Entrar`,signingIn:`Entrando...`,rememberMe:`Lembrar de mim`,forgotPassword:`Esqueceu sua senha?`,autologinFailed:`O login SSO automático falhou. Escolha um provedor abaixo para continuar.`,localDisabledNotice:`O login local está desativado. Use um dos provedores SSO abaixo.`,loginSuccess:`Login realizado com sucesso`,loginFailed:`Falha no login`,enterCredentials:`Por favor, insira nome de usuário e senha`,enterEmail:`Por favor, insira seu endereço de e-mail`,oidcLoginFailed:`Falha no login OIDC`,oidcErrors:{providerError:`O provedor de identidade retornou um erro`,missingParameters:`Parâmetros obrigatórios ausentes no callback OIDC`,invalidState:`Estado OIDC inválido ou já utilizado`,stateExpired:`Sessão OIDC expirada — tente novamente`,providerNotFound:`Provedor OIDC não encontrado`,discoveryFailed:`Falha ao obter o documento de descoberta OIDC`,invalidDiscovery:`Documento de descoberta OIDC inválido`,networkError:`Erro de rede durante a troca de token OIDC`,badResponse:`Resposta inesperada durante a troca de token OIDC`,noIdToken:`O provedor OIDC não retornou um token de ID`,validationFailed:`Falha na validação do token OIDC`,nonceMismatch:`Nonce OIDC não corresponde — possível ataque de replay`,missingSubClaim:`Token OIDC sem claim sub`,noLinkedAccount:`Nenhuma conta local vinculada a esta identidade OIDC`,accountInactive:`Sua conta está inativa`,userResolutionFailed:`Falha ao resolver sua conta`,internalError:`Erro interno durante o login OIDC`,tokenExchangeFailed:`Falha na troca de token OIDC`},forgotPasswordTitle:`Esqueceu a Senha`,forgotPasswordMessage:`Se você esqueceu sua senha, entre em contato com o administrador do sistema para redefini-la.`,forgotPasswordEmailMessage:`Digite seu endereço de email e enviaremos uma nova senha.`,emailAddress:`Endereço de Email`,emailPlaceholder:`seu.email@exemplo.com`,cancel:`Cancelar`,sending:`Enviando...`,sendResetEmail:`Enviar Email de Redefinição`,howToReset:`Como redefinir sua senha:`,resetStep1:`Entre em contato com o administrador do Bambuddy`,resetStep2:`Peça para redefinir sua senha na Gestão de Usuários`,resetStep3:`Eles podem definir uma nova senha temporária para você`,resetStep4:`Faça login com a nova senha e altere-a nas Configurações`,gotIt:`Entendi`,resetPassword:{title:`Definir nova senha`,subtitle:`Digite e confirme sua nova senha abaixo.`,newPassword:`Nova senha`,newPasswordPlaceholder:`Pelo menos 8 caracteres`,confirmPassword:`Confirmar senha`,confirmPasswordPlaceholder:`Repetir nova senha`,saving:`Salvando…`,submit:`Definir nova senha`,backToLogin:`Voltar para o login`,passwordsDoNotMatch:`As senhas não coincidem`,passwordTooShort:`A senha deve ter pelo menos 8 caracteres`,resetFailed:`Falha ao redefinir senha. O link pode ter expirado.`},twoFA:{title:`Autenticação em dois fatores`,subtitle:`Sua conta está protegida com 2FA. Insira o código de verificação abaixo.`,methodAuthenticator:`Aplicativo autenticador`,methodEmail:`Código por e-mail`,methodBackup:`Código de recuperação`,instructionsTotp:`Abra seu aplicativo autenticador e insira o código de 6 dígitos gerado para o Bambuddy.`,instructionsEmail:`Um código de 6 dígitos foi enviado para o seu e-mail. Ele é válido por 10 minutos.`,instructionsEmailNotSent:`Clique no botão abaixo para receber um código de verificação por e-mail.`,instructionsBackup:`Insira um dos seus códigos de recuperação de 8 caracteres. Cada código só pode ser utilizado uma vez.`,sendCodeButton:`Enviar código por e-mail`,sendingCode:`Enviando...`,resendCode:`Reenviar código`,codeLabel:`Código de verificação`,backupCodeLabel:`Código de recuperação`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Verificar`,verifyingButton:`Verificando...`,backToLogin:`← Voltar para o login`,orContinueWith:`ou entrar com`,signInWith:`Entrar com {{provider}}`,enterCode:`Por favor, insira o código de verificação`,sendCodeFailed:`Falha ao enviar o código de verificação`,invalidCode:`Código inválido. Por favor, tente novamente.`}},setup:{title:`Bambuddy Configuração`,subtitle:`Configure a autenticação para sua instância do Bambuddy`,enableAuth:`Ativar Autenticação`,adminAccount:`Conta de Administrador`,adminAccountDesc:`Se usuários administradores já existirem, a autenticação será ativada usando as contas de administrador existentes. Deixe os campos abaixo vazios para usar os administradores existentes ou insira novas credenciais para criar um novo usuário administrador.`,adminUsername:`Nome de usuário do administrador`,adminPassword:`Senha do administrador`,optionalIfAdminExists:`(opcional se usuários administradores existirem)`,adminUsernamePlaceholder:`Digite o nome de usuário do administrador (opcional)`,adminPasswordPlaceholder:`Digite a senha do administrador (opcional)`,confirmPassword:`Confirmar Senha`,confirmPasswordPlaceholder:`Confirme a senha do administrador`,settingUp:`Configurando...`,completeSetup:`Concluir Configuração`,toast:{authEnabledAdminCreated:`Autenticação ativada e usuário administrador criado`,authEnabledExistingAdmins:`Autenticação ativada usando usuários administradores existentes`,setupCompleted:`Configuração concluída`,enterBothCredentials:`Por favor, insira o nome de usuário e a senha do administrador, ou deixe ambos vazios para usar os usuários administradores existentes`,passwordsDoNotMatch:`As senhas não coincidem`,passwordTooShort:`A senha deve ter pelo menos 6 caracteres`}},changePassword:{title:`Alterar Senha`,currentPassword:`Senha Atual`,currentPasswordPlaceholder:`Digite a senha atual`,newPassword:`Nova Senha`,newPasswordPlaceholder:`Digite a nova senha (mínimo 6 caracteres)`,confirmPassword:`Confirmar Senha`,confirmPasswordPlaceholder:`Confirme a nova senha`,passwordsDoNotMatch:`As senhas não coincidem`,passwordTooShort:`A senha deve ter pelo menos 6 caracteres`,changing:`Alterando...`,success:`Senha alterada com sucesso`,failed:`Falha ao alterar a senha`},plateAlert:{title:`Impressão Pausada!`,message:`Objetos detectados na mesa de impressão. A impressão foi automaticamente pausada. Por favor, limpe a mesa e retome a impressão.`,understand:`Entendi`},camera:{title:`Visualização da Câmera`,invalidPrinterId:`ID da impressora inválido`,live:`Ao Vivo`,snapshot:`Captura`,restartStream:`Reiniciar transmissão`,refreshSnapshot:`Atualizar captura`,fullscreen:`Tela Cheia`,exitFullscreen:`Sair da Tela Cheia`,connectingToCamera:`Conectando à câmera...`,capturingSnapshot:`Capturando imagem...`,connectionLost:`Conexão perdida`,connectionFailed:`Falha na conexão com a câmera`,reconnecting:`Reconectando em {{countdown}}s... (tentativa {{attempt}}/{{max}})`,reconnectNow:`Reconectar agora`,cameraUnavailable:`Câmera indisponível`,cameraUnavailableDesc:`Certifique-se de que a impressora está ligada e conectada.`,noCamera:`Nenhuma câmera disponível`,retry:`Tentar novamente`,cameraStream:`Transmissão da câmera`,zoomOut:`Reduzir zoom`,zoomIn:`Aumentar zoom`,resetZoom:`Redefinir zoom`,recording:`Gravando`,startRecording:`Iniciar gravação`,stopRecording:`Parar gravação`,chamberLight:`Alternar luz da câmara`,unavailable:`Câmera indisponível`,diagnose:{button:`Diagnóstico`,modalTitle:`Diagnóstico da câmera`,running:`Executando diagnóstico...`,runFailed:`Não foi possível executar o diagnóstico: {{error}}`,retry:`Executar novamente`,stage:{tcp_reachable:`Conectividade de rede`,first_frame:`Captura de frame`,live_stream_active:`Transmissão ao vivo ativa`},summary:{all_ok:`A câmera está funcionando. O diagnóstico concluiu todas as etapas com sucesso.`,live_stream_active_healthy:`A câmera está transmitindo com frames recentes — nenhum teste necessário.`,printer_unreachable:`Impressora inacessível. Verifique o endereço IP, a conexão de rede e se a impressora está ligada.`,camera_port_closed:`A impressora responde mas a porta da câmera está fechada. Verifique se o modo LAN e o modo desenvolvedor estão ativados nas configurações da impressora.`,no_frame:`Conexão com a câmera estabelecida mas nenhum frame recebido. Tente novamente ou verifique se a câmera está habilitada nas configurações da impressora.`,unknown_failure:`Diagnóstico da câmera falhou por motivo desconhecido. Consulte o log de suporte para mais detalhes.`},meta:{protocol:`Protocolo`,port:`Porta`,profile:`Perfil`}}},groups:{title:`Gerenciamento de Grupos`,subtitle:`Gerenciar grupos de permissão para controle de acesso`,backToSettings:`Voltar para Configurações`,createGroup:`Criar Grupo`,noPermission:`Você não tem permissão para acessar esta página.`,system:`Sistema`,noDescription:`Sem descrição`,usersCount:`{{count}} usuários`,permissionsCount:`{{count}} permissões`,edit:`Editar`,delete:`Excluir`,toast:{created:`Grupo criado com sucesso`,updated:`Grupo atualizado com sucesso`,deleted:`Grupo excluído com sucesso`,enterGroupName:`Por favor, insira um nome para o grupo`},modal:{editGroup:`Editar Grupo`,createGroup:`Criar Grupo`,cancel:`Cancelar`,saving:`Salvando...`,creating:`Criando...`,saveChanges:`Salvar Alterações`},form:{groupName:`Nome do Grupo`,groupNamePlaceholder:`Insira o nome do grupo`,systemGroupWarning:`Os nomes dos grupos do sistema não podem ser alterados`,description:`Descrição`,descriptionPlaceholder:`Insira a descrição (opcional)`,permissions:`Permissões ({{count}} selecionadas)`},deleteModal:{title:`Excluir Grupo`,message:`Tem certeza de que deseja excluir este grupo? Os usuários deste grupo perderão essas permissões.`,confirm:`Excluir Grupo`},editor:{title:`Editar Grupo`,createTitle:`Criar Grupo`,search:`Pesquisar permissões...`,selectAll:`Selecionar Tudo`,clearAll:`Limpar Tudo`,permissionsSelected:`{{count}} selecionada(s)`,noResults:`Nenhuma permissão corresponde à sua pesquisa`,websocketHint:`Necessário para atualizações em tempo real. Sem esta permissão, a interface recorre à sondagem periódica.`}},users:{title:`Gerenciamento de Usuários`,subtitle:`Gerenciar usuários e seu acesso à sua instância do Bambuddy`,backToSettings:`Voltar para Configurações`,createUser:`Criar Usuário`,noPermission:`Você não tem permissão para acessar esta página.`,admin:`Administrador`,noGroups:`Sem grupos`,active:`Ativo`,inactive:`Inativo`,edit:`Editar`,delete:`Excluir`,system:`Sistema`,noGroupsAvailable:`Nenhum grupo disponível`,table:{username:`Nome de Usuário`,groups:`Grupos`,status:`Status`,actions:`Ações`},toast:{created:`Usuário criado com sucesso`,updated:`Usuário atualizado com sucesso`,deleted:`Usuário excluído com sucesso`,fillRequired:`Por favor, preencha todos os campos obrigatórios`,passwordsDoNotMatch:`As senhas não coincidem`,passwordTooShort:`A senha deve ter pelo menos 6 caracteres`,ldapProvisioned:`Usuário LDAP "{{username}}" provisionado`},modal:{createUser:`Criar Usuário`,editUser:`Editar Usuário`,cancel:`Cancelar`,creating:`Criando...`,saving:`Salvando...`,saveChanges:`Salvar Alterações`,advancedAuthSubtitle:`com Autenticação Avançada`,tabsAriaLabel:`Fonte do usuário`,localTab:`Local`,ldapTab:`LDAP`,ldapSearchLabel:`Pesquisar diretório`,ldapSearchPlaceholder:`Digite um nome de usuário, nome ou e-mail...`,ldapMinChars:`Digite ao menos 2 caracteres para pesquisar`,ldapTypeToSearch:`Comece a digitar para pesquisar o diretório LDAP`,ldapSearching:`Pesquisando diretório...`,ldapNoResults:`Nenhum usuário correspondente no diretório`,ldapSearchError:`Falha na pesquisa do diretório. Verifique o status do servidor LDAP.`,ldapAlreadyProvisioned:`Já provisionado`,ldapSelectedLabel:`Selecionado`,ldapProvision:`Provisionar usuário`,ldapProvisioning:`Provisionando...`,ldapErrorProvision:`Falha no provisionamento. Verifique o status do servidor LDAP e tente novamente.`},form:{username:`Nome de Usuário`,usernamePlaceholder:`Insira o nome de usuário`,email:`E-mail`,emailPlaceholder:`user@example.com`,password:`Senha`,passwordPlaceholder:`Insira a senha`,confirmPassword:`Confirmar Senha`,confirmPasswordPlaceholder:`Confirme a senha`,newPasswordPlaceholder:`Insira a nova senha`,confirmNewPasswordPlaceholder:`Confirme a nova senha`,leaveBlankToKeep:`deixe em branco para manter a atual`,groups:`Grupos`,optional:`opcional`,autoGeneratedPassword:`Uma senha segura será gerada automaticamente e enviada por e-mail ao usuário.`,passwordManagedByAdvancedAuth:`A senha é gerenciada pela Autenticação Avançada. Use "Redefinir Senha" para enviar uma nova senha ao usuário por e-mail.`,resetPassword:`Redefinir Senha`,resettingPassword:`Redefinindo Senha...`},deleteModal:{title:`Excluir Usuário`,message:`Tem certeza de que deseja excluir este usuário? Esta ação não pode ser desfeita.`,confirm:`Excluir Usuário`}},streamOverlay:{title:`Sobreposição de stream`,invalidPrinterId:`ID da impressora inválido`,cameraStream:`Transmissão da câmera`,progress:`Progresso da impressão`,eta:`ETA`,printerIdle:`Impressora ociosa`,printerOffline:`Impressora offline`,builder:{title:`Sobreposição de transmissão`,description:`Monta a URL de uma sobreposição de transmissão: a câmera em tela cheia com os dados da impressão sobrepostos, para OBS, um painel de parede ou qualquer fonte de navegador. Escolha os campos e copie a URL.`,printer:`Impressora`,size:`Tamanho do texto`,sizeSmall:`Pequeno`,sizeMedium:`Médio`,sizeLarge:`Grande`,fps:`Taxa de quadros`,fpsHint:`Câmeras A1 e P1 chegam no máximo a cerca de 5 fps, qualquer que seja o valor pedido.`,token:`Token de sobreposição (opcional)`,tokenHint:`Só é necessário com login ativado: o OBS não tem sessão própria. Crie um acima com o escopo Sobreposição de transmissão.`,tokenWarning:`Esta URL contém um token: quem conseguir lê-la pode assistir à transmissão e ver o nome do arquivo. Revogue o token para cortar o acesso.`,fields:`Campos a exibir`,fieldPrinter:`Nome da impressora`,fieldFilename:`Nome do arquivo`,fieldStatus:`Status`,fieldProgress:`Barra de progresso`,fieldLayers:`Contagem de camadas`,fieldEta:`Tempo restante e previsão de término`,fieldCamera:`Imagem da câmera`,chamberHint:`A temperatura da câmara aparece apenas em modelos com sensor real: P1 e A1 informam um valor sem sentido, por isso ela é omitida.`,urlTitle:`URL da sobreposição`,open:`Abrir`,showPreview:`Mostrar prévia`,hidePreview:`Ocultar prévia`,previewTitle:`Prévia da sobreposição`},status:{printing:`Imprimindo`,paused:`Pausado`,finished:`Concluído`,failed:`Falhou`,idle:`Ocioso`,unknown:`Desconhecido`}},profiles:{title:`Perfis`,subtitle:`Gerencie seus presets de fatiador e calibrações de avanço de pressão`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Perfis Locais`,kprofiles:`K-Perfis`},orcaCloud:{connectedAs:`Conectado como`,connectedShort:`Conectado ao Orca Cloud`,logout:`Desconectar`,noLogoutPermission:`Você não tem permissão para desconectar`,noConnectPermission:`Você não tem permissão para conectar ao Orca Cloud`,retry:`Tentar novamente`,connectButton:`Conectar Orca Cloud`,connect:{title:`Conectar ao Orca Cloud`,description:`Entre na sua conta Orca Cloud para sincronizar seus perfis de slicer no Bambuddy.`},device:{title:`Aprovar o Bambuddy no Orca Cloud`,instruction:`Abra o Orca Cloud e aprove este código. O Bambuddy se conecta automaticamente assim que você aprovar.`,codeLabel:`Seu código de pareamento`,openButton:`Abrir a página de aprovação do Orca Cloud`,manualHint:`Ou acesse {{url}} e insira o código acima.`,waiting:`Aguardando sua aprovação…`,cancel:`Cancelar`},profiles:{title:`Seus perfis do Orca Cloud ({{count}})`,refresh:`Atualizar`,empty:`Nenhum perfil encontrado na sua conta Orca Cloud ainda.`},toast:{disconnected:`Desconectado do Orca Cloud`},errors:{startFailed:`Não foi possível iniciar o login do Orca Cloud.`,denied:`O pareamento foi negado no Orca Cloud.`,expired:`O código de pareamento expirou. Clique em Conectar para tentar novamente.`,pollFailed:`A conexão foi perdida enquanto aguardava a aprovação. Tente novamente.`}},localProfiles:{title:`Perfis Locais`,subtitle:`Importe e gerencie presets de fatiador do OrcaSlicer`,import:`Importar Perfis`,importDesc:`Solte arquivos .bbscfg, .bbsflmt, .orca_filament, .zip ou .json aqui`,importing:`Importando...`,search:`Pesquisar presets locais...`,noPresets:`Nenhum preset local ainda`,noSearchResults:`Nenhum preset corresponde à sua busca`,badge:`Local`,edit:`Editar`,delete:`Excluir`,cancel:`Cancelar`,deleteConfirmTitle:`Excluir Preset`,deleteConfirm:`Tem certeza de que deseja excluir este preset? Esta ação não pode ser desfeita.`,source:`Fonte`,inheritsFrom:`Herdado de`,filamentType:`Tipo`,vendor:`Fornecedor`,compatiblePrinters:`Impressoras Compatíveis`,nozzleTemp:`Temperatura do Bico`,cost:`Custo`,density:`Densidade`,pressureAdvance:`Avanço de Pressão`,filament:`Filamento`,process:`Processo`,printer:`Impressora`,toast:{importSuccess:`{{count}} preset(s) importada(s)`,importSkipped:`{{count}} preset(s) ignorada(s) (duplicadas)`,importError:`{{count}} erro(s) durante a importação`,deleted:`Preset excluído`,updated:`Preset atualizado`}},connectedAs:`Conectado como`,signInExpiredTitle:`Sessão do Bambu Cloud expirada`,signInExpiredBody:`A Bambu Lab não aceita mais o token armazenado. Entre novamente para restaurar os perfis na nuvem, as importações do MakerWorld e a verificação de firmware.`,logout:`Sair`,noLogoutPermission:`Você não tem permissão para sair`,failedToLoad:`Falha ao carregar perfis`,retry:`Tentar novamente`,time:{justNow:`Agora mesmo`,minsAgo:`há {{count}} minutos`,hoursAgo:`há {{count}} horas`,daysAgo:`há {{count}} dias`},toast:{loggedOut:`Desconectado`},login:{title:`Conectar ao Bambu Cloud`,subtitle:`Sincronize seus presets de fatiador entre dispositivos`,email:`E-mail`,password:`Senha`,region:`Região`,regionGlobal:`Global`,regionChina:`China`,verificationCode:`Código de Verificação`,totpCode:`Código do Autenticador`,checkEmail:`Verifique seu email ({{email}}) para um código de 6 dígitos`,enterTotpHint:`Digite o código de 6 dígitos do seu aplicativo autenticador`,accessToken:`Token de Acesso`,accessTokenHint:`Cole seu token de acesso da Bambu Cloud. Contas da região China precisam usar este caminho (vinculadas ao celular — login por e-mail indisponível). Veja no wiki como obter o token dos cookies do MakerWorld.`,back:`Voltar`,loginButton:`Entrar`,verifyButton:`Verificar`,setTokenButton:`Definir Token`,useToken:`Usar token de acesso em vez disso`,captchaTitle:`O Bambu Cloud está pedindo um CAPTCHA`,captchaBody:`O Bambu está exigindo um CAPTCHA da sua rede antes de aceitar um login, e esse desafio não pode ser respondido pelo Bambuddy. Seu e-mail e sua senha não são o problema. O bloqueio está ligado ao seu endereço IP público e costuma passar sozinho em algumas horas; tentar de novo repetidamente prolonga o bloqueio. Para entrar agora, use um token de acesso obtido em uma sessão do navegador.`,useEmail:`Entrar com email em vez disso`,toast:{loggedIn:`Conectado com sucesso`,codeSent:`Código de verificação enviado para seu email`,enterTotp:`Digite o código do seu aplicativo autenticador`,tokenSet:`Token definido com sucesso`}},presets:{myPreset:`Meu preset (editável)`,duplicate:`Duplicar`,editable:`Editável`,failedToLoadDetails:`Falha ao carregar detalhes do preset`,deleteConfirm:`Excluir este preset?`,deleteWarning:`Isso excluirá permanentemente "{{name}}" do Bambu Cloud. Esta ação não pode ser desfeita.`,noDuplicatePermission:`Você não tem permissão para duplicar presets`,noEditPermission:`Você não tem permissão para editar presets`,noDeletePermission:`Você não tem permissão para excluir presets`,types:{filament:`Preset de filamento`,printer:`Preset de impressora`,process:`Preset de processo`},toast:{deleted:`Preset excluído`,created:`Preset criado`,updated:`Preset atualizado`,duplicated:`Preset duplicado`,fieldAdded:`Campo "{{key}}" adicionado`,exported:`Preset exportado`},baseLabel:`Base: {{name}}`,currentLabel:`Atual: {{name}}`,newPreset:`Novo Preset`,editPreset:`Editar Preset`,duplicatePreset:`Duplicar Preset`,createNewPreset:`Criar Novo Preset`,customizeSettings:`Personalizar configurações para seu novo preset`,compareWithBase:`Comparar com o preset base`,compare:`Comparar`,basePreset:`Preset Base`,selectBasePreset:`Selecionar preset base...`,presetName:`Nome do Preset`,myCustomPreset:`Meu preset personalizado`,inheritsFrom:`Herdado de`,dropJsonToImport:`Solte o arquivo JSON para importar`,tabs:{common:`Comum`,allFields:`Todos os Campos`},availableFields:`Campos Disponíveis`,searchFieldsPlaceholder:`Pesquisar campos...`,noMatchingFields:`Nenhum campo correspondente`,allFieldsAdded:`Todos os campos adicionados`,addCustomField:`Adicionar campo personalizado`,yourOverrides:`Suas Substituições`,noOverridesYet:`Nenhuma substituição ainda`,clickFieldsToAdd:`Clique nos campos à esquerda para adicioná-los`,saveAsTemplate:`Salvar como modelo`,jsonTip:`Dica: Arraste e solte um arquivo .json em qualquer lugar deste modal para importar configurações`},cloudView:{searchPlaceholder:`Pesquisar presets...`,templates:`Modelos`,refresh:`Atualizar`,newPreset:`Novo Preset`,clearFilters:`Limpar filtros`,compareMode:`Modo de Comparação`,selectAnotherPreset:`Selecionar outro preset {{type}}`,clickTwoPresets:`Clique em dois presets do mesmo tipo para comparar`,selectFirst:`1. Selecionar primeiro`,selectSecond:`2. Selecionar segundo`,compareNow:`Comparar Agora`,lastSynced:`Última sincronização:`,showingCount:`Mostrando {{showing}} de {{total}} presets`,noPresetsFound:`Nenhum preset encontrado`,columns:{filament:`Filamento`,process:`Processo`,printer:`Impressora`},noFilamentPresets:`Nenhum preset de filamento`,noProcessPresets:`Nenhum preset de processo`,noPrinterPresets:`Nenhum preset de impressora`,filters:{type:`Tipo`,owner:`Proprietário`,printer:`Impressora`,nozzle:`Bico`,filament:`Filamento`,layer:`Camada`,all:`Todos`,myPresets:`Meus Presets`,builtIn:`Integrado`,process:`Processo`},noTemplatesPermission:`Você não tem permissão para gerenciar modelos`,noRefreshPermission:`Você não tem permissão para atualizar perfis`,noCreatePermission:`Você não tem permissão para criar presets`},templates:{title:`Modelos Rápidos`,noTemplates:`Nenhum modelo ainda`,createFirst:`Crie modelos a partir do editor de presets`,typeFilter:`Tipo:`,deleteTitle:`Excluir Modelo`,deleteWarning:`Esta ação não pode ser desfeita`,deleteConfirm:`Tem certeza de que deseja excluir "{{name}}"?`,namePlaceholder:`Nome do modelo`,descriptionPlaceholder:`Descrição`,settingsJson:`Configurações (JSON)`,fieldsCount:`{{count}} campos`,shownInModals:`Exibido em modais`,hiddenInModals:`Oculto em modais`,apply:`Aplicar`,toast:{deleted:`Modelo excluído`,updated:`Modelo atualizado`,created:`Modelo criado`,applied:`Modelo aplicado`}}},support:{debugLoggingActive:`Registro de depuração ativo`,manageLogs:`Gerenciar`,collectItem7:`Conectividade da impressora e versões de firmware`,collectItem8:`Status de integração (Spoolman, MQTT, HA)`,collectItem9:`Interfaces de rede (somente sub-redes)`,collectItem10:`Versões de pacotes Python`,collectItem11:`Verificações de integridade do banco de dados`,collectItem12:`Detalhes do ambiente Docker`,bundleGenerating:`Gerando pacote...`,bundleStepConnection:`Executando verificações de conectividade das impressoras`,bundleStepVirtualPrinters:`Executando verificações de configuração das impressoras virtuais`,bundleStepLogScan:`Analisando registros recentes em busca de problemas conhecidos`,bundleStepBuild:`Criando o ZIP do pacote de suporte`},fileManager:{variants:{badge:`{{count}} versões`,groupAction:`Agrupar como versões`,groupTooltip:`Marcar estes arquivos como o mesmo trabalho fatiado para impressoras diferentes`,grouped:`{{count}} arquivos agrupados como versões`,printAlternatives:`Imprimir ({{count}} alternativas)`},title:`Gerenciador de Arquivos`,subtitle:`Organize e gerencie seus arquivos de impressão`,uploadFiles:`Enviar Arquivos`,newFolder:`Nova Pasta`,folderName:`Nome da Pasta`,folderNamePlaceholder:`ex.: Peças Funcionais`,renameFile:`Renomear Arquivo`,renameFolder:`Renomear Pasta`,invalidFilenameChar:`O caractere "{{char}}" não é permitido em nomes de arquivos de impressão. O cartão SD da impressora rejeita: < > : " / \\ | ? *`,moveFiles:`Mover {{count}} Arquivo(s)`,rootNoFolder:`Raiz (Sem Pasta)`,current:`Atual`,linkFolder:`Vincular Pasta`,linkFolderDescription:`Vincular "{{name}}" a um projeto ou arquivo para acesso rápido.`,project:`Projeto`,archive:`Arquivo`,noProjectsFound:`Nenhum projeto encontrado`,noArchivesFound:`Nenhum arquivo encontrado`,unlink:`Desvincular`,link:`Vincular`,dragDropFiles:`Arraste e solte os arquivos aqui`,dropFilesHere:`Solte os arquivos aqui`,releaseToUpload:`Solte para enviar`,orClickToBrowse:`ou clique para procurar`,allFileTypesSupported:`Todos os tipos de arquivos são suportados. Arquivos ZIP serão extraídos.`,zipFilesDetected:`Arquivos ZIP detectados`,zipExtractOptions:`Arquivos ZIP serão extraídos. Escolha como lidar com a estrutura de pastas:`,preserveZipStructure:`Preservar estrutura de pastas do ZIP`,createFolderFromZip:`Criar pasta a partir do nome do arquivo ZIP`,stlThumbnailGeneration:`Geração de miniaturas STL`,zipMayContainStl:`Arquivos ZIP podem conter arquivos STL. Miniaturas podem ser geradas durante a extração.`,thumbnailsCanBeGenerated:`Miniaturas podem ser geradas para arquivos STL. Modelos grandes podem levar mais tempo para processar.`,generateThumbnailsForStl:`Gerar miniaturas para arquivos STL`,threemfDetected:`Arquivos 3MF detectados`,threemfExtractionInfo:`Modelo da impressora, material, cor e configurações de impressão serão extraídos automaticamente dos arquivos 3MF.`,willBeExtracted:`Será extraído`,filesExtracted:`{{count}} arquivos extraídos`,uploadComplete:`Upload concluído: {{succeeded}} bem-sucedidos`,uploadFailed:`Falha no envio`,zipFilesFailed:`{{count}} arquivos falharam`,uploading:`Enviando...`,changeLink:`Alterar link...`,linkTo:`Vincular a...`,linkToProjectOrArchive:`Vincular a projeto ou arquivo`,generateThumbnail:`Gerar miniatura`,generateThumbnails:`Gerar miniaturas`,generateThumbnailsForMissing:`Gerar miniaturas para arquivos STL que não possuem`,gridView:`Visualização em grade`,listView:`Visualização em lista`,lowDiskSpaceWarning:`Aviso de pouco espaço em disco`,lowDiskSpaceDetails:`Apenas {{free}} livres de {{total}} no total. O limite está definido para {{threshold}} GB nas configurações.`,files:`Arquivos`,folders:`Pastas`,size:`Tamanho`,free:`Livre`,allFiles:`Todos os arquivos`,allExternal:`Externos`,externalIsEmpty:`Nenhum arquivo externo`,externalEmptyDescription:`Os arquivos das suas pastas externas vinculadas aparecerão aqui.`,wrap:`Quebrar texto`,enableTextWrapping:`Ativar quebra de texto`,disableTextWrapping:`Desativar quebra de texto`,collapse:`Recolher`,collapseFoldersByDefault:`Recolher pastas por padrão`,expandFoldersByDefault:`Expandir pastas por padrão`,folderSort:`Ordenar pastas`,folderSortByName:`Por nome`,folderSortByActivity:`Por atividade recente`,dragToResizeTooltip:`Arraste para redimensionar, clique duas vezes para redefinir`,searchFiles:`Pesquisar arquivos...`,searchSubfoldersHint:`Incluindo subpastas`,readme:{truncated:`Truncado`,show:`Mostrar README`,hide:`Ocultar README`,label:`README`},tags:{title:`Tags`,subtitle:`Rotule arquivos para filtros transversais — brinquedos, seguro para crianças, somente PETG, o que precisar.`,manage:`Tags`,manageTitle:`Gerenciar catálogo de tags`,add:`Nova tag`,edit:`Renomear tag`,name:`Nome`,fileCount:`Arquivos`,empty:`Ainda não há tags. Crie uma para começar a rotular arquivos.`,noMatches:`Nenhuma tag correspondente.`,createPlaceholder:`ex.: brinquedos, infantil, petg`,createButton:`Criar`,nameRequired:`O nome é obrigatório.`,searchPlaceholder:`Filtrar tags...`,created:`Tag criada.`,updated:`Tag renomeada.`,deleted:`Tag removida.`,saveFailed:`Não foi possível salvar a tag.`,deleteFailed:`Não foi possível remover a tag.`,applyFailed:`Não foi possível aplicar as tags.`,applyAdd:`Adicionar tags`,applyRemove:`Remover tags`,applyAddSuccess:`{{count}} tag(s) adicionada(s) em {{files}} arquivo(s).`,applyRemoveSuccess:`{{count}} tag(s) removida(s) em {{files}} arquivo(s).`,actionAdd:`Adicionar aos arquivos selecionados`,actionRemove:`Remover dos arquivos selecionados`,tagAction:`Marcar`,bulkTitle:`Marcar {{count}} arquivo(s) selecionado(s)`,bulkTooltip:`Adicionar ou remover tags em cada arquivo selecionado.`,noPermission:`Você não tem permissão para marcar arquivos.`,filterLabel:`Filtrando por:`,clearAll:`Limpar tudo`,confirmDelete:`Excluir a tag "{{name}}"?`,confirmDeleteMessage:`Isto remove a tag do catálogo. Os arquivos mantêm as outras tags.`,confirmDeleteInUseMessage:`Esta tag está em {{count}} arquivo(s). Excluí-la remove o chip de todos; os arquivos em si ficam intactos.`,editAria:`Editar {{name}}`,deleteAria:`Excluir {{name}}`},allTypes:`Todos os tipos`,prints:`Impressões`,ascending:`Crescente`,descending:`Decrescente`,showModified:`Mostrar datas de modificação`,hideModified:`Ocultar datas de modificação`,lastModified:`Última modificação`,lastActivity:`Última atividade`,resultsCount:`{{showing}} de {{total}} arquivos`,selectAll:`Selecionar tudo`,deselectAll:`Desmarcar tudo`,selected:`{{count}} selecionado(s)`,adding:`Adicionando...`,loadingFiles:`Carregando arquivos...`,folderIsEmpty:`A pasta está vazia`,noFilesYet:`Nenhum arquivo ainda`,folderEmptyDescription:`Envie arquivos ou mova arquivos para esta pasta para começar.`,noFilesDescription:`Envie arquivos para começar a organizar seus arquivos relacionados à impressão.`,noMatchingFiles:`Nenhum arquivo correspondente`,noMatchingFilesDescription:`Nenhum arquivo corresponde aos seus critérios de pesquisa ou filtro.`,clearFilters:`Limpar filtros`,printedCount:`Impresso {{count}}x`,uploadedBy:`Enviado por`,deleteFolder:`Excluir pasta`,deleteFile:`Excluir arquivo`,deleteFilesCount:`Excluir {{count}} arquivos`,deleteFolderConfirm:`Tem certeza de que deseja excluir esta pasta? Todos os arquivos dentro também serão excluídos.`,deleteFileConfirm:`Tem certeza de que deseja excluir este arquivo?`,deleteFilesConfirm:`Tem certeza de que deseja excluir {{count}} arquivos selecionados? Esta ação não pode ser desfeita.`,deleting:`Excluindo...`,noPermissionRenameFolder:`Você não tem permissão para renomear pastas`,noPermissionLinkFolder:`Você não tem permissão para vincular pastas`,noPermissionDeleteFolder:`Você não tem permissão para excluir pastas`,onlyEmptyFoldersDeletable:`Você só pode excluir pastas vazias`,noPermissionPrint:`Você não tem permissão para imprimir`,noPermissionSlice:`Você não tem permissão para fatiar arquivos`,noPermissionAddToQueue:`Você não tem permissão para adicionar à fila`,noPermissionDownload:`Você não tem permissão para baixar arquivos`,noPermissionPreview:`Você não tem permissão para pré-visualizar arquivos`,preview3d:`Pré-visualização 3D`,noPermissionRenameFile:`Você não tem permissão para renomear este arquivo`,noPermissionGenerateThumbnail:`Você não tem permissão para gerar miniaturas`,noPermissionDeleteFile:`Você não tem permissão para excluir este arquivo`,noPermissionCreateFolder:`Você não tem permissão para criar pastas`,noPermissionUpload:`Você não tem permissão para enviar arquivos`,noPermissionMoveFiles:`Você não tem permissão para mover arquivos`,noPermissionDeleteFiles:`Você não tem permissão para excluir arquivos`,linkExternal:`Vincular externo`,linkExternalFolder:`Vincular pasta externa`,linkExternalFolderDescription:`Montar um diretório do host (NAS, USB, compartilhamento de rede) no Gerenciador de Arquivos. Os arquivos não são copiados — são acessados diretamente do caminho original.`,externalFolderNamePlaceholder:`ex. Impressões NAS`,externalPath:`Caminho do host`,externalPathHelp:`Caminho absoluto do diretório no host Docker. Deve estar montado como bind no contêiner.`,readOnly:`Somente leitura`,readOnlyHelp:`impede uploads e exclusões`,showHiddenFiles:`Mostrar arquivos ocultos (arquivos ponto)`,externalFolder:`Pasta externa`,scanFolder:`Escanear`,toast:{folderCreated:`Pasta criada`,openInSlicerFailed:`Não foi possível abrir no fatiador`,folderDeleted:`Pasta excluída`,fileDeleted:`Arquivo excluído`,filesDeleted:`Excluídos {{count}} arquivos`,filesMoved:`Arquivos movidos`,folderLinked:`Pasta vinculada`,folderUnlinked:`Pasta desvinculada`,externalFolderLinked:`Pasta externa vinculada e escaneada`,folderScanned:`Escaneamento concluído: {{added}} adicionados, {{removed}} removidos`,addedToQueue:`Adicionado {{count}} arquivo(s) à fila`,addedToQueuePartial:`Adicionado {{added}} arquivo(s), {{failed}} falharam`,failedToAddToQueue:`Falha ao adicionar arquivos: {{error}}`,fileRenamed:`Arquivo renomeado`,folderRenamed:`Pasta renomeada`,thumbnailsGenerated:`Geradas {{count}} miniatura(s)`,thumbnailsGeneratedPartial:`Geradas {{succeeded}} miniatura(s), {{failed}} falharam`,noStlMissingThumbnails:`Nenhum arquivo STL sem miniatura`,failedToGenerateThumbnails:`Falha ao gerar miniaturas: {{error}}`,thumbnailGenerated:`Miniatura gerada`,failedToGenerateThumbnail:`Falha ao gerar miniatura: {{error}}`}},projects:{parentLabel:`Projeto principal`,parentNone:`Nenhum (projeto de nível superior)`,parentHint:`Aninhe este projeto em outro para que seus números sejam somados em um projeto mestre`,partOf:`Parte de {{name}}`,subProjectCount:`{{count}} sub-projetos`,subProjectsOf:`Sub-projetos de {{name}}`,collapseSubProjects:`Recolher sub-projetos`,expandSubProjects:`Expandir sub-projetos`,title:`Projetos`,subtitle:`Organize e acompanhe seus projetos de impressão 3D`,newProject:`Novo Projeto`,editProject:`Editar Projeto`,deleteProject:`Excluir Projeto`,projectName:`Nome do Projeto`,description:`Descrição`,noProjects:`Nenhum projeto ainda`,noProjectsFiltered:`Nenhum projeto {{status}}`,noProjectsFilteredHelp:`Você não tem nenhum projeto {{status}}. Os projetos aparecerão aqui quando seu status mudar.`,createFirst:`Crie seu primeiro projeto para começar a organizar impressões relacionadas, acompanhar o progresso e gerenciar suas construções.`,createFirstButton:`Crie Seu Primeiro Projeto`,create:`Criar`,files:`Arquivos`,prints:`Impressões`,plates:`Placas`,parts:`Peças`,lastModified:`Última Modificação`,deleteConfirm:`Tem certeza de que deseja excluir este projeto? Arquivos e itens da fila serão desvinculados, mas não excluídos.`,addFiles:`Adicionar Arquivos`,removeFile:`Remover Arquivo`,viewDetails:`Ver Detalhes`,namePlaceholder:`ex., Voron 2.4 Build`,descriptionPlaceholder:`Descrição opcional...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`A URL deve começar com http:// ou https://`,openExternalUrl:`Abrir URL do projeto`,coverImageLabel:`Imagem de capa`,coverImageAlt:`Imagem de capa do projeto`,coverImageUpload:`Enviar`,coverImageReplace:`Substituir`,coverImageRemove:`Remover`,color:`Cor`,targetPlates:`Placas Alvo`,targetPlatesPlaceholder:`ex., 25`,targetPlatesHelp:`Número de trabalhos de impressão`,targetParts:`Peças Alvo`,targetPartsPlaceholder:`ex., 150`,targetPartsHelp:`Total de objetos necessários`,targetSets:`Cópias por arquivo`,targetSetsPlaceholder:`ex.: 10`,targetSetsHelp:`Quantas vezes cada arquivo imprimível deve ser impresso`,tagsLabel:`Tags (separadas por vírgula)`,tagsPlaceholder:`ex., voron, funcional, presente`,dueDate:`Data de Vencimento`,priority:`Prioridade`,priorityLow:`Baixa`,priorityNormal:`Normal`,priorityHigh:`Alta`,priorityUrgent:`Urgente`,statusActive:`Ativo`,statusCompleted:`Concluído`,statusArchived:`Arquivado`,done:`Concluído`,completed:`Concluído`,failed:`Falhou`,inQueue:`Na fila`,noPrintsYet:`Nenhuma impressão ainda`,printJobs:`Trabalhos de impressão (placas)`,partsPrinted:`Peças impressas`,failedParts:`Peças falhadas`,import:`Importar`,export:`Exportar`,importProject:`Importar projeto`,exportAll:`Exportar todos os projetos`,loading:`Carregando projetos...`,noEditPermission:`Você não tem permissão para editar projetos`,noDeletePermission:`Você não tem permissão para excluir projetos`,noCreatePermission:`Você não tem permissão para criar projetos`,noImportPermission:`Você não tem permissão para importar projetos`,noExportPermission:`Você não tem permissão para exportar projetos`,toast:{created:`Projeto criado`,updated:`Projeto atualizado`,deleted:`Projeto excluído`,imported:`Projeto importado`,multipleImported:`{{count}} projetos importados`,importFailed:`Falha na importação`,exported:`Projetos exportados (apenas metadados)`}},projectDetail:{notFound:`Projeto não encontrado`,backToProjects:`Voltar para Projetos`,export:`Exportar`,exportProject:`Exportar projeto`,noExportPermission:`Você não tem permissão para exportar projetos`,noEditPermission:`Você não tem permissão para editar projetos`,partOf:`Parte de:`,priorityLabel:`Prioridade:`,noPrints:`Nenhuma impressão neste projeto ainda`,status:{active:`Ativo`,completed:`Concluído`,archived:`Arquivado`},priority:{low:`Baixa`,normal:`Normal`,high:`Alta`,urgent:`Urgente`},dueDate:{overdue:`Atrasado`,today:`Vence hoje`,daysLeft:`{{count}} dias restantes`},progress:{platesProgress:`Progresso das Placas`,partsProgress:`Progresso das Peças`,setsProgress:`Conjuntos completos`,sets:`conjuntos`,setsHint:`Um conjunto está completo quando cada arquivo imprimível atinge esse número`,printJobs:`Trabalhos de Impressão`,parts:`Peças`,percentComplete:`{{percent}}% concluído`,remaining:`{{count}} restantes`},stats:{printJobs:`Trabalhos de Impressão`,total:`total`,failed:`{{count}} falhou`,partsPrinted:`{{count}} peças impressas`,printTime:`Tempo de Impressão`,filamentUsed:`Filamento Usado`},cost:{title:`Rastreamento de Custos`,filamentCost:`Custo do Filamento`,energy:`Energia`,totalCost:`Custo Total`,total:`Total`,includesBom:`incl. lista de materiais`,budget:`Orçamento`,remaining:`Restante`},subProjects:{title:`Sub-projetos ({{count}})`,jobs:`{{count}} trabalhos`},rollup:{title:`Incluindo {{count}} sub-projetos`,progress:`Progresso geral`,percentComplete:`{{percent}}% concluído`},notes:{title:`Notas`,noEditPermission:`Você não tem permissão para editar notas`,placeholder:`Adicione notas sobre este projeto...`,empty:`Nenhuma nota ainda. Clique em Editar para adicionar notas.`},files:{title:`Arquivos`,linkFolders:`Vincular pastas do Gerenciador de Arquivos`,forQuickAccess:`a este projeto para acesso rápido.`,fileCount:`{{count}} arquivo(s)`,empty:`Nenhuma pasta vinculada. Vá para o Gerenciador de Arquivos e vincule uma pasta a este projeto.`,printedCount:`Impresso {{count}} vez(es)`,progressTooltip:`{{done}} de {{target}} impressões concluídas`,noFiles:`Nenhum arquivo nesta pasta.`},bom:{title:`Lista de Materiais`,acquired:`{{completed}}/{{total}} adquiridos`,showAll:`Mostrar todos`,hideDone:`Ocultar concluídos`,addPart:`Adicionar Peça`,noAddPermission:`Você não tem permissão para adicionar peças`,partNamePlaceholder:`Nome da peça (ex.: parafusos M3x8)`,partName:`Nome da peça`,qty:`Quantidade`,price:`Preço ({{currency}})`,sourcingUrlPlaceholder:`URL de fornecimento (opcional)`,remarksPlaceholder:`Observações (opcional)`,deletePart:`Excluir Peça`,deleteConfirm:`Tem certeza de que deseja excluir "{{name}}"?`,noUpdatePermission:`Você não tem permissão para atualizar peças`,noEditPermission:`Você não tem permissão para editar peças`,noDeletePermission:`Você não tem permissão para excluir peças`,totalCost:`Custo total:`,empty:`Nenhuma peça na lista de materiais. Adicione hardware, eletrônicos ou outros componentes para rastrear o que precisa ser adquirido.`},timeline:{title:`Linha do Tempo de Atividades`,empty:`Nenhuma atividade ainda.`},template:{saveAsTemplate:`Salvar como Modelo`,noCreatePermission:`Você não tem permissão para criar modelos`},queue:{title:`Fila`,viewAll:`Ver todos`,printing:`{{count}} imprimindo`,queued:`{{count}} na fila`},prints:{title:`Impressões ({{count}})`},toast:{projectUpdated:`Projeto atualizado`,partAdded:`Peça adicionada`,partRemoved:`Peça removida`,exportFailed:`Falha na exportação`,projectExported:`Projeto exportado`,templateCreated:`Modelo criado`}},system:{title:`Informações do Sistema`,version:`Versão`,uptime:`Tempo de Atividade`,cpuUsage:`Uso da CPU`,memoryUsage:`Uso da Memória`,diskUsage:`Uso do Disco`,networkInfo:`Informações de Rede`,logs:`Registros`,debugMode:`Modo de Depuração`,enableDebug:`Ativar Registro de Depuração`,disableDebug:`Desativar Registro de Depuração`,downloadLogs:`Baixar Logs`,clearLogs:`Limpar Logs`,dockerInfo:`Informações do Docker`,containerName:`Nome do Contêiner`,imageName:`Nome da Imagem`,platform:`Plataforma`,architecture:`Arquitetura`},sponsors:{sectionTitle:`Independente e financiado pela comunidade`,tagline:`O Bambuddy é gratuito e continua assim porque há quem escolha apoiá-lo. Sem VC, sem dependência de nuvem.`,viewSupporters:`Ver apoiadores`,toastPrints:`Você concluiu {{count}} impressões com o Bambuddy. O Bambuddy continua gratuito graças a quem o apoia.`,toastCost:`Você acompanhou {{total}} de filamento com o Bambuddy. Veja quem mantém o projeto independente.`,toastArchives:`{{count}} impressões arquivadas com o Bambuddy. Veja quem o mantém independente.`,toastAnniversary:`Um ano com o Bambuddy! Veja quem mantém o projeto independente.`,toastVersionUpdate:`Atualizado para v{{version}}. O Bambuddy continua gratuito graças a quem o apoia.`,toastBusiness:`Você usa o Bambuddy em {{count}} impressoras? Existe um plano de suporte para equipes: correções prioritárias, emissão de nota fiscal e contato direto com o mantenedor.`,businessCta:`Bambuddy para empresas`,businessTitle:`Bambuddy para empresas`,businessTagline:`Você está gerenciando {{count}} impressoras. Suporte prioritário, licenciamento comercial e faturamento estão disponíveis para equipes e fazendas de impressão.`},library:{title:`Biblioteca de Filamentos`,addFilament:`Adicionar Filamento`,editFilament:`Editar Filamento`,deleteFilament:`Excluir Filamento`,vendor:`Fornecedor`,material:`Material`,color:`Cor`,kFactor:`Fator K`,temperature:`Temperatura`,noFilaments:`Nenhum filamento na biblioteca`,deleteConfirm:`Tem certeza de que deseja excluir este filamento?`,importFromPrinter:`Importar da Impressora`,exportToFile:`Exportar para Arquivo`,runWithPipeline:{actionLabel:`Executar com pipeline`,noPermission:`Você não tem permissão para executar pipelines`,modalTitle:`Executar com pipeline`,confirmTitle:`Confirmar execução`,confirmIntro:`A pré-verificação encontrou problemas com esta execução`,sourceHint:`Origem`,pipelineHint:`Pipeline`,targetHint:`Destino`,pipelineListAria:`Pipelines disponíveis`,runAnyway:`Executar mesmo assim`,loading:`Carregando…`,empty:`Ainda não há pipelines salvas. Abra o diálogo Cortar e clique em "Salvar como pipeline" para criar uma.`,noTarget:`Sem impressora de destino`,noTargetMessage:`Esta pipeline não tem impressora de destino. Abra-a em Configurações para escolher uma.`,copies:`Cópias`,copiesHint:`máx {{n}}`,classTarget:`Qualquer {{model}}`,toast:{started:`Execução da pipeline iniciada`,failed:`Não foi possível iniciar a execução`},issue:{printerNotSet:`Sem impressora de destino nesta pipeline.`,printerNotFound:`Impressora de destino não existe mais.`,printerDisabled:`Impressora de destino está desativada.`,printerOffline:`Impressora de destino está offline.`,filamentType:`Slot de filamento {{slot}}: esperado {{expected}}, AMS tem {{actual}}`,filamentColor:`Slot de filamento {{slot}}: cor diferente (esperado {{expected}}, AMS tem {{actual}})`,amsSlotMissing:`Slot AMS {{slot}} indisponível nesta impressora`,filamentUnverified:`Slot de filamento {{slot}} vem de uma predefinição da nuvem / padrão e não pôde ser verificado estaticamente.`,noClassMatches:`Nenhuma impressora nesta instalação corresponde à classe de modelo de destino da pipeline ({{expected}}).`,classNotSet:`O destino da pipeline está configurado como classe de impressora, mas nenhum modelo foi escolhido.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Exibindo os padrões do fatiador: seu sidecar é mais antigo que este recurso e não consegue informar os valores de um perfil. Atualize a imagem do sidecar para vê-los. Tudo o que você não alterar continua usando o perfil.`,presetValuesNotConfigured:`Exibindo os padrões do fatiador: nenhum sidecar está configurado, portanto os valores de um perfil não podem ser lidos. Tudo o que você não alterar continua usando o perfil.`,presetValuesSidecarUnavailable:`Exibindo os padrões do fatiador: o sidecar não respondeu, portanto os valores de um perfil não podem ser lidos. Tudo o que você não alterar continua usando o perfil.`,presetValuesUnavailable:`Exibindo os padrões do fatiador: não foi possível ler os valores do perfil escolhido. Tudo o que você não alterar continua usando o perfil.`,filamentDefault:`Padrão`,fromFile:`do arquivo`,fromFileHint:`O designer alterou isto no arquivo de origem. O valor é {{value}}.`,fromFilePrinterCoupled:`impressora do designer`,fromFilePrinterCoupledHint:`Ajustado para a impressora para a qual este arquivo foi projetado — pode estar errado ou fora de faixa na sua.`,fromFileOverridesPreset:`substitui o perfil`,fromFileOverridesPresetHint:`O arquivo define {{value}} enquanto o perfil escolhido usa {{preset}}. Marque apenas se o arquivo deve prevalecer.`,useFromFile:`Usar o valor do arquivo de origem para {{option}}`,otherFromFile:`Outras configurações deste arquivo`,fromFileSummary:`O designer alterou {{count}} configurações de processo neste arquivo. Só as que você marcar são usadas.`,fromFileUseAll:`Usar as configurações do designer`,fromFileUseAllHint:`Marca as configurações que valem em outras impressoras. As ajustadas para a impressora do designer, e as que definem o preset escolhido, ficam desmarcadas.`,fromFileClear:`Limpar {{count}}`,loading:`Carregando configurações do fatiador…`,mode:{simple:`Simples`,advanced:`Avançado`,expert:`Especialista`},searchPlaceholder:`Buscar configurações`,resetAll:`Redefinir {{count}}`,resetOption:`Redefinir para o padrão`,noMatches:`Nenhuma configuração corresponde a esta busca.`},slice:{filamentSlotUnset:`não definido`,processSettingsEmbedded:`Não é usado enquanto “Usar as configurações internas do arquivo” estiver ativo — as configurações do próprio arquivo conduzem este fatiamento.`,processSettingsInactive:`Inativo`,presetsHidden:`{{count}} ocultos`,showAllPresets:`Mostrar todos`,showFewerPresets:`Mostrar menos`,processSettings:`Configurações de processo`,processSettingsHint:`Ajuste o perfil escolhido para este fatiamento. Tudo o que você não alterar permanece como o perfil define.`,processSettingsChanged:`{{count}} alterados`,processSettingsUnchanged:`Padrões do perfil`,title:`Fatiar modelo`,action:`Fatiar`,actionAll:`Fatiar todas as {{count}} bandejas`,actionAllTitle:`Fatiar todas as bandejas em uma saída multi-bandeja única (um único arquivo). A seleção de filamento cobre cada slot definido pelo projeto.`,allPlatesToggle:`Fatiar todas as {{count}} bandejas`,slicing:`Fatiando…`,printer:`Perfil de impressora`,process:`Perfil de processo`,filament:`Perfil de filamento`,filamentSlot:`Filamento {{index}} ({{type}})`,filamentColour:`Cor do filamento`,selectPreset:`— Selecione uma predefinição —`,loadingPresets:`Carregando predefinições…`,analyzingPlateFilaments:`Analisando filamentos da mesa…`,analyzingPlateFilamentsHint:`Executando uma fatia de pré-visualização para descobrir quais slots AMS esta mesa usa. Cacheado depois — reabrir é instantâneo.`,previewToast:`Analisando {{name}} – {{elapsed}}`,previewWithProgress:`Analisando {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,notUsedByPlate:`— não usado por esta mesa`,noPresetsForSlot:`Nenhuma predefinição disponível`,otherPrinters:`Outras impressoras`,presetsLoadFailed:`Falha ao carregar predefinições. Abra Configurações → Perfis para importá-las primeiro.`,refreshPresets:`Atualizar`,refreshPresetsTitle:`Atualizar predefinições — buscar as listagens mais recentes da nuvem e dos pacotes (use após excluir uma predefinição no Bambu Studio ou Bambu Handy)`,allPresetsRequired:`Todas as predefinições devem ser selecionadas`,useEmbedded:`Usar as configurações incorporadas do arquivo`,useEmbeddedHint:`Fatiar como o designer configurou (paredes, preenchimento, filamento) em vez dos perfis acima. Disponível porque sua impressora corresponde à do arquivo.`,autoOrient:`Orientar os objetos automaticamente`,autoOrientHint:`O fatiador gira cada objeto para o lado que imprime melhor antes de fatiar. Substitui a orientação salva no arquivo.`,autoArrange:`Organizar automaticamente na mesa`,autoArrangeHint:`O fatiador posiciona os objetos para que não se sobreponham. Substitui a disposição do arquivo.`,enqueuing:`Enviando trabalho de fatiamento…`,queued:`Na fila…`,failed:`Falha ao fatiar. Verifique os logs do sidecar.`,startedToast:`Fatiando {{name}} em segundo plano…`,queuedToast:`Na fila: {{name}} – {{elapsed}}`,runningToast:`Fatiando {{name}} – {{elapsed}}`,runningWithProgress:`{{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,runningWithProgressMultiPlate:`Bandeja {{plateIndex}} de {{plateCount}} • {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,completedToast:`{{name}} fatiado`,externalWriteFallbackToast:`Salvo na biblioteca interna: não foi possível gravar na pasta externa`,failedTitle:`Falha ao fatiar`,failedToast:`Falha ao fatiar {{name}}: {{detail}}`,tier:{local:`Importado`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Padrão`},cloud:{notAuthenticated:`Faça login no Bambu Cloud (Configurações → Perfis → Bambu Cloud) para ver as predefinições.`,expired:`Sessão do Bambu Cloud expirou – faça login novamente para atualizar as predefinições.`,unreachable:`Bambu Cloud está inacessível agora. Predefinições locais e padrão ainda funcionam.`},orcaCloud:{notAuthenticated:`Entre no Orca Cloud (Perfis → Orca Cloud) para ver seus presets Orca.`,expired:`Sessão do Orca Cloud expirada — entre novamente para atualizar seus presets Orca.`,unreachable:`Orca Cloud está indisponível no momento. Outros presets continuam funcionando.`},bedType:{label:`Mesa de impressão`,auto:`Auto (usar predefinição de processo)`,coolPlate:`Cool Plate`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`},pipelines:{label:`Pipeline`,applyAria:`Aplicar pipeline`,applyPrompt:`Aplicar pipeline…`,empty:`Nenhuma pipeline salva`,saveButton:`Salvar como pipeline`,saveTitle:`Salvar a seleção atual dos quatro slots como uma pipeline reutilizável`,namePlaceholder:`Nome da pipeline`,nameAria:`Novo nome de pipeline`,toast:{applied:`"{{name}}" aplicada`,saved:`Pipeline salva`,saveFailed:`Falha ao salvar`}}},spoolman:{title:`Integração com Spoolman`,enabled:`Spoolman Ativado`,url:`URL do Spoolman`,connected:`Conectado`,disconnected:`Não Conectado`,testConnection:`Testar Conexão`,sync:`Sincronizar`,syncing:`Sincronizando...`,lastSync:`Última Sincronização`,linkToSpoolman:`Vincular ao Spoolman`,openInSpoolman:`Abrir no Spoolman`,unlinkSpool:`Desvincular Carretel`,unlinkConfirmTitle:`Remover atribuição do carretel?`,unlinkConfirmMessage:`Isso removerá o carretel deste slot. Os dados do próprio carretel permanecerão inalterados.`,selectSpool:`Selecionar Carretel`,noUnlinkedSpools:`Nenhum carretel não atribuído disponível`,linkSuccess:`Carretel atribuído com sucesso`,linkFailed:`Falha ao atribuir carretel`,unlinkSuccess:`Atribuição do carretel removida com sucesso`,unlinkFailed:`Falha ao remover atribuição do carretel`,linkedSpool:`Carretel atribuído`,spoolId:`Carretel ID (Spool ID)`,fillSourceLabel:`(Spoolman)`,weight:`Peso`,remaining:`Restante`,disableWeightSync:`Desativar Sincronização de Peso Estimado do AMS`,disableWeightSyncDesc:`Não atualize a capacidade restante a partir das estimativas do AMS. Use isso se preferir o rastreamento de uso do Spoolman em vez das estimativas baseadas em porcentagem do AMS. Novos carretéis ainda usarão a estimativa do AMS como seu peso inicial.`,reportPartialUsage:`Relatar Uso Parcial para Impressões Falhadas`,reportPartialUsageDesc:`Quando uma impressão falha ou é cancelada, relate o filamento estimado usado até aquele ponto com base no progresso das camadas.`},locations:{title:`Locais de armazenamento`,subtitle:`Gerencie prateleiras, gavetas e outros locais físicos para bobinas`,add:`Adicionar local`,addShort:`Adicionar`,edit:`Editar local`,name:`Nome`,spools:`Bobinas`,sensors:`Sensores`,empty:`Nenhum local de armazenamento. Crie sua primeira prateleira ou gaveta.`,manage:`Locais`,createPlaceholder:`ex. Prateleira A, Gaveta 1`,nameRequired:`O nome do local é obrigatório`,created:`Local criado`,updated:`Local atualizado`,deleted:`Local excluído`,saveFailed:`Falha ao salvar local`,deleteFailed:`Falha ao excluir local`,deleteBlocked:`Remova todas as bobinas deste local antes de excluir`,confirmDelete:`Excluir «{{name}}»?`,confirmDeleteMessage:`Este local será removido do catálogo. Mova as bobinas primeiro.`,confirmDeleteMessageWithSensors:`Este local será removido do catálogo. Mova as bobinas primeiro. Os sensores conectados também serão excluídos.`},inventory:{title:`Inventário de Carretéis`,subtitle:`Gerencie seus carretéis`,addToInventory:`Adicionar ao Inventário`,addToInventoryPending:`Adicionando...`,addToInventorySuccess:`Carretel adicionado ao inventário`,addToInventoryFailed:`Falha ao adicionar carretel ao inventário`,unknownSpoolTitle:`Novo filamento detectado`,unknownSpoolMessage:`Um carretel com tag RFID desconhecido foi detectado em {{location}}. Adicioná-lo ao seu inventário agora?`,unknownSpoolSlot:`Slot`,bulk:{selectAllVisible:`Selecionar todos os visíveis`,selectRow:`Selecionar linha`,selectGroup:`Selecionar grupo`,selectionCount:`{{count}} selecionados`,edit:`Editar`,printLabels:`Imprimir etiquetas`,resetUsage:`Redefinir uso`,restore:`Restaurar`,archive:`Arquivar`,delete:`Excluir`,clearSelection:`Limpar seleção`,editTitle:`Editar carretéis em massa`,editSubtitle:`Aplica-se a {{count}} carretéis selecionados. Apenas os campos marcados serão atualizados.`,editHint:`Digite em um campo para marcá-lo para atualização — apenas linhas marcadas são enviadas. Deixar um campo vazio mantém os carretéis inalterados (limpar campos só é feito por carretel).`,useCustom:`Usar "{{value}}"`,toggleField:`Ativar atualização deste campo`,changeCount:`{{count}} campos serão atualizados.`,applyPending:`Aplicando...`,applyButton:`Aplicar a {{count}} carretéis`,deleteTitle:`Excluir carretéis selecionados`,archiveTitle:`Arquivar carretéis selecionados`,restoreTitle:`Restaurar carretéis selecionados`,resetUsageTitle:`Redefinir uso dos carretéis selecionados`,deleteMessage:`Excluir permanentemente {{count}} carretéis? Esta ação não pode ser desfeita.`,archiveMessage:`Arquivar {{count}} carretéis? Eles podem ser restaurados depois.`,restoreMessage:`Restaurar {{count}} carretéis arquivados?`,resetUsageMessage:`Redefinir o contador "Total Consumido" em {{count}} carretéis? O peso restante é preservado.`,updateSuccess:`{{count}} carretéis atualizados`,updateFailed:`Atualização em massa falhou`,updatePartial:`{{ok}} carretéis atualizados, {{failed}} falharam`,updateAllFailed:`Todas as {{count}} atualizações falharam — a seleção é mantida para nova tentativa`,deleteSuccess:`{{count}} carretéis excluídos`,deleteFailed:`Exclusão em massa falhou`,deletePartial:`{{ok}} carretéis excluídos, {{failed}} falharam`,deleteAllFailed:`Todas as {{count}} exclusões falharam — a seleção é mantida para nova tentativa`,archiveSuccess:`{{count}} carretéis arquivados`,archiveFailed:`Arquivamento em massa falhou`,archivePartial:`{{ok}} carretéis arquivados, {{failed}} falharam`,archiveAllFailed:`Todos os {{count}} arquivamentos falharam — a seleção é mantida para nova tentativa`,restoreSuccess:`{{count}} carretéis restaurados`,restoreFailed:`Restauração em massa falhou`,restorePartial:`{{ok}} carretéis restaurados, {{failed}} falharam`,restoreAllFailed:`Todas as {{count}} restaurações falharam — a seleção é mantida para nova tentativa`,invalidHex:`Digite 6 caracteres hex (RRGGBB) ou 8 (RRGGBBAA). Caso contrário o campo não será aplicado.`},spoolmanMixedContentTitle:`Spoolman não pode carregar em HTTPS — conteúdo misto bloqueado pelo navegador`,spoolmanMixedContentBody:`O Bambuddy é servido via HTTPS (pelo seu reverse proxy), mas a URL do Spoolman ainda é HTTP. Os navegadores bloqueiam conteúdo misto por segurança, então a interface embutida do Spoolman não consegue carregar. O Spoolman também precisa estar acessível via HTTPS.`,spoolmanMixedContentFixReverseProxy:`Coloque o Spoolman atrás do mesmo reverse proxy do Bambuddy (Traefik / Nginx / Caddy) com HTTPS e atualize a URL do Spoolman em Configurações com o novo endereço HTTPS.`,spoolmanMixedContentFixOpenNewTab:`Como alternativa, abra o Spoolman em uma nova aba via HTTP — as regras de conteúdo misto só se aplicam a frames embutidos, uma aba independente funciona normalmente.`,spoolmanOpenInNewTab:`Abrir Spoolman em nova aba`,labels:{title:`Imprimir etiquetas de bobinas`,selectedCount:`{{count}} selecionado`,pickSpools:`Escolha para quais bobinas imprimir etiquetas:`,monochrome:`Monocromático (impressora preto e branco)`,monochromeHint:`Remove a amostra de cor e amplia o texto`,startingPosition:`Posição inicial da etiqueta`,startingPositionRange:`Somente modelos em folha: L7160 aceita 1–21; 5160 aceita 1–30.`,startingPositionInvalid:`Digite um número inteiro de 1 a {{capacity}}.`,startingPositionFirst:`A impressão começa na posição 1.`,startingPositionSkipped:`As posições de 1 a {{lastPosition}} ficarão vazias na primeira folha.`,startingPositionRangeError:`A posição inicial deve estar entre 1 e {{capacity}} para esta folha.`,searchPlaceholder:`Buscar por nome, marca ou #ID`,filterByMaterial:`Material:`,allMaterials:`Tudo`,selectVisible:`Selecionar todos visíveis ({{count}})`,deselectVisible:`Desmarcar visíveis`,clearAll:`Limpar tudo`,noSpoolsToShow:`Nenhuma bobina para mostrar. Ajuste o filtro e tente novamente.`,noMatches:`Nenhuma bobina corresponde à pesquisa ou filtro atual.`,printOne:`Imprimir etiqueta desta bobina`,printLabels:`Imprimir etiquetas…`,bulkTitle:`Escolha bobinas para etiquetar entre as {{count}} exibidas`,noSpoolsTitle:`Nenhuma bobina para rotular`,error:`Não foi possível gerar etiquetas: {{msg}}`,sortBy:{label:`Ordenar:`,id:`Por ID`,color:`Por cor`},templates:{amsHolderSmall:{label:`Suporte AMS — pequeno (74 × 33 mm)`,hint:`Uma etiqueta por página; corresponde à etiqueta imprimível do modelo MakerWorld 752566 (Suporte de etiquetas de filamento AMS).`},amsHolderLarge:{label:`Suporte AMS — grande (75 × 55 mm)`,hint:`Uma etiqueta por página; encaixa na variante com inserto em cartão do Suporte de etiquetas de filamento AMS. Espaço suficiente para amostra de cor, marca, material, ID e QR code.`},box40x30:{label:`Etiqueta de caixa (40 × 30 mm)`,hint:`Uma etiqueta por página; tamanho comum de rolo DK/Brother, ideal para etiquetar sacos de filamento e caixas de armazenamento.`},box:{label:`Box label (62 × 29 mm)`,hint:`Uma etiqueta por página; tamanho para Brother PT/QL e etiquetas pequenas Dymo.`},averyL7160:{label:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,hint:`Formato de folha UE; 21 etiquetas por página A4.`},avery5160:{label:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,hint:`Formato de folha US; 30 etiquetas por página Letter.`}}},csv:{importButton:`Importar CSV`,exportButton:`Exportar CSV`,modalTitle:`Importar carretéis de CSV`,selectFile:`Escolha um arquivo CSV ou arraste-o aqui`,dragHint:`Cabeçalho: material (obrigatório), brand, subtype, color_name, rgba, …`,parsing:`Lendo arquivo…`,previewError:`Não foi possível ler o arquivo CSV`,validCount:`{{count}} válidos`,errorCount:`{{count}} com erro`,skippedCount:`{{count}} ignorados`,colRow:`Linha`,colStatus:`Status`,colColor:`Cor`,colorResolved:`Cor preenchida pelo catálogo`,colorCrossMaterial:`Cor obtida de um material diferente — sem correspondência exata no catálogo`,duplicateExisting:`Já existe uma bobina com este material, marca e cor — ela será importada mesmo assim como uma nova bobina`,spoolmanHint:`No modo Spoolman, use a importação/exportação CSV integrada do Spoolman.`,importValidRows:`Importar {{count}} linhas válidas`,noValidRows:`Nenhuma linha válida`,importing:`Importando…`,importSuccess:`{{count}} carretéis importados`,importError:`Falha na importação`,exportError:`Falha na exportação`},addSpool:`Adicionar Carretel`,editSpool:`Editar Carretel`,copySpool:`Copiar Carretel`,material:`Material`,selectMaterial:`Selecionar material...`,subtype:`Subtipo`,brand:`Marca`,searchBrand:`Pesquisar marca...`,useCustomBrand:`Usar "{{brand}}"`,useCustomMaterial:`Usar material personalizado: {{material}}`,suggestedOptions:`Sugeridos`,allOptions:`Todos`,colorName:`Nome da Cor`,colorNamePlaceholder:`Branco Jade, Vermelho Fogo...`,color:`Cor`,hexColor:`Cor Hexadecimal`,pickColor:`Escolher cor personalizada`,labelWeight:`Peso da Etiqueta`,coreWeight:`Peso do Carretel Vazio`,searchSpoolWeight:`Pesquisar peso do carretel...`,weightUsed:`Usado`,currentWeight:`Peso Restante`,measuredWeight:`Peso Medido`,spoolName:`Bobina`,costPerKg:`Custo por kg`,storageLocation:`Local de armazenamento`,temperature:`Temperatura`,humidity:`Umidade`,battery:`Bateria`,storageLocationPlaceholder:`ex. Prateleira A, Gaveta 1`,openInInventory:`Abrir no inventário`,measuredWeightError:`O peso medido deve estar entre {{min}}g e {{max}}g.`,slicerFilament:`Filamento do Fatiador`,slicerFilamentName:`Nome do Predefinido do Fatiador`,slicerPreset:`Predefinido do Fatiador`,searchPresets:`Pesquisar predefinições de filamento...`,selectedPreset:`Selecionado`,noPresetsFound:`Nenhuma predefinição encontrada`,tempOverrides:`Substituições de Temperatura`,note:`Nota`,notePlaceholder:`Quaisquer notas adicionais sobre este spool...`,category:`Categoria`,categoryPlaceholder:`ex. Produção, Protótipo, Cliente A`,categoryNone:`Sem categoria`,storageLocationNone:`Sem local definido`,lowStockThresholdOverride:`Limite de estoque baixo (este carretel)`,lowStockThresholdOverrideHelp:`Deixe em branco para usar o limite global ({{global}}%).`,clearRfid:`Limpar tag RFID`,rfidCleared:`Tag RFID limpa`,archive:`Arquivar`,restore:`Restaurar`,noSpools:`Nenhum carretel ainda. Adicione seu primeiro carretel para começar.`,noAvailableSpools:`Nenhum carretel disponível. Adicione um carretel ao seu inventário ou desatribua um de outro slot primeiro.`,kProfiles:`K-Perfis`,addKProfile:`Adicionar K-Perfil`,assignSpool:`Atribuir Carretel`,unassignSpool:`Desatribuir`,assignSuccess:`Carretel atribuído e slot AMS configurado`,assignPendingInsert:`Atribuído. O slot será configurado quando você inserir o carretel.`,assignFailed:`Falha ao atribuir carretel`,selectSpool:`Selecione um carretel para atribuir a este slot`,assigned:`Atribuído`,assigning:`Atribuindo...`,searchSpools:`Pesquisar carretéis...`,showAllSpools:`Mostrar todos os carretéis`,spoolmanSpools:`Bobinas Spoolman`,allMaterials:`Todos os Materiais`,filterByBrand:`Filtrar por marca...`,showArchived:`Mostrar arquivados`,quickAdd:`Adição rápida (Estoque)`,quantity:`Quantidade`,stock:`Estoque`,configured:`Configurado`,spoolsCreated:`{{count}} carretéis criados`,spoolsPartiallyCreated:`{{created}} de {{total}} carretéis criados (alguns falharam)`,spoolCreated:`Carretel criado`,spoolUpdated:`Carretel atualizado`,spoolDeleted:`Carretel excluído`,deepLinkSpoolNotFound:`Carretel não encontrado`,deepLinkFetchFailed:`Não foi possível carregar o carretel — tente novamente`,spoolArchived:`Carretel arquivado`,spoolRestored:`Carretel restaurado`,kProfileSaveFailed:`Não foi possível salvar as configurações do perfil K`,syncWeightSpoolNotFound:`Carretel não encontrado — pode ter sido excluído`,syncWeightSpoolmanUnreachable:`Spoolman está inacessível — tente novamente mais tarde`,syncWeightFailed:`Falha ao sincronizar o peso`,spoolmanUnreachable:`Spoolman está inacessível — tente novamente mais tarde`,deleteSpoolNotFound:`Carretel não encontrado — pode já ter sido excluído`,deleteFailed:`Falha ao excluir carretel`,archiveSpoolNotFound:`Carretel não encontrado — pode já ter sido excluído`,archiveFailed:`Falha ao arquivar carretel`,restoreSpoolNotFound:`Carretel não encontrado — pode já ter sido excluído`,restoreFailed:`Falha ao restaurar carretel`,saveFailed:`Falha ao salvar as alterações`,tagClearFailed:`Falha ao limpar a tag`,deleteConfirm:`Tem certeza de que deseja excluir este carretel? Esta ação não pode ser desfeita.`,archiveConfirm:`Tem certeza de que deseja arquivar este carretel?`,advancedSettings:`Configurações Avançadas`,filamentInfoTab:`Informações do Filamento`,paProfileTab:`Perfil PA`,colorAndCostTab:`Cor e custo`,printersTab:`Impressoras`,filamentInfo:`Filamento`,additional:`Adicional`,loadingPresets:`Carregando predefinições da nuvem...`,cloudConnected:`Nuvem conectada`,cloudNotConnected:`Nuvem não conectada (usando padrões)`,recentColors:`Recentes`,searchColors:`Pesquisar cores...`,searchResults:`Resultados da pesquisa`,allColors:`Todas as cores`,commonColors:`Cores comuns`,showLess:`Mostrar menos`,showAll:`Mostrar tudo`,noColorsFound:`Nenhuma cor corresponde à sua pesquisa`,noResults:`Nenhum resultado encontrado`,extraColorsLabel:`Cores extras`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Cole 2 a 8 paradas hex, separadas por vírgulas. Renderizado como gradiente.`,extraColorsInvalid:`Hex inválidos ignorados: {{tokens}}`,colorEffectLabel:`Efeito`,colorEffect:{none:`Nenhum`,sparkle:`Brilho`,wood:`Madeira`,marble:`Mármore`,glow:`Brilho`,matte:`Fosco`,silk:`Silk`,galaxy:`Galáxia`,rainbow:`Arco-íris`,metal:`Metal`,translucent:`Translúcido`,gradient:`Gradiente`,dualColor:`Dupla cor`,triColor:`Tricolor`,multicolor:`Multicolor`},selectMaterialFirst:`Por favor, selecione um material primeiro na aba Informações do Filamento.`,noPrintersConfigured:`Nenhuma impressora configurada. Adicione impressoras para usar perfis PA.`,matchingFilter:`Correspondente`,anyBrand:`Qualquer marca`,anyVariant:`Qualquer variante`,autoSelect:`Seleção automática`,matches:`correspondências`,match:`correspondência`,noMatches:`Nenhuma correspondência`,connected:`Conectado`,offline:`Offline`,printerOffline:`A impressora está offline. Conecte-se para visualizar os perfis de calibração.`,noKProfilesMatch:`Nenhum K-perfil corresponde ao filamento selecionado.`,leftNozzle:`Bico Esquerdo`,rightNozzle:`Bico Direito`,profilesSelected:`perfil(is) de calibração selecionado(s)`,filamentPreset:`Predefinição de filamento`,presetUseSpoolDefault:`Usar a predefinição do carretel`,presetInherited:`herdada`,presetOverride:`personalizada`,presetNeedsModel:`Esta impressora ainda não informou o modelo, portanto não pode ter uma predefinição própria.`,autoMatchPresets:`Associar automaticamente`,autoMatchPresetsHint:`Encontrar a variante da predefinição do carretel que nomeia cada modelo`,kProfilesPerPrinter:`Perfis K`,kProfileNotSet:`Não definido`,kProfileFlowMismatch:`Este perfil foi medido com um bico {{profile}}, mas há um bico {{fitted}} instalado, portanto não será aplicado`,nozzle:`Bico`,unknownModel:`Modelo desconhecido`,onePrinter:`1 impressora`,nPrinters:`{{n}} impressoras`,filamentPresetsLoadFailed:`Não foi possível carregar as predefinições por modelo deste carretel`,filamentPresetSaveFailed:`Não foi possível salvar as predefinições por modelo`,totalInventory:`Inventário Total`,totalConsumed:`Total Consumido`,byMaterial:`Por Material`,inPrinter:`Na Impressora`,lowStock:`Estoque Baixo`,sinceTracking:`Desde o início do rastreamento`,resetConsumedCounter:`Zerar contador`,resetConsumedCounterTooltip:`Zerar o contador de gramas consumidas desta bobina. O peso restante não é alterado.`,resetConsumedCounterConfirm:`Zerar o contador de gramas consumidas desta bobina? As impressões futuras voltarão a contar do zero. A bobina em si, o cálculo do peso restante e as configurações não são alterados.`,resetAllConsumedCounters:`Zerar todos os contadores`,resetAllConsumedCountersTooltip:`Zerar o contador de gramas consumidas em todas as bobinas. Os pesos restantes não são alterados.`,resetAllConsumedCountersConfirm:`Zerar o contador de gramas consumidas nas {{count}} bobinas (incluindo as arquivadas)? Isso limpa o "Total Consumido" para que as impressões futuras contem do zero. Bobinas e pesos restantes não são alterados.`,consumedCounterReset:`Contador zerado`,allConsumedCountersReset:`Contador zerado em {{count}} bobina(s)`,resetConsumedCounterFailed:`Falha ao zerar o contador`,loadedInAms:`Carregado no AMS/Ext`,remaining:`Restante`,weightCheck:`Verificação de Peso`,lastWeighed:`Última pesagem`,neverWeighed:`Nunca pesado`,search:`Pesquisar carretéis...`,showing:`Mostrando`,to:`até`,of:`de`,show:`Mostrar`,spools:`carretéis`,spool:`carretel`,page:`Página`,noSpoolsMatch:`Nenhum resultado encontrado`,noSpoolsMatchDesc:`Tente ajustar sua pesquisa ou filtros para encontrar o que você está procurando.`,active:`Ativo`,archived:`Arquivado`,all:`Todos`,used:`Usado`,new:`Novo`,clearFilters:`Limpar filtros`,table:`Tabela`,cards:`Cartões`,net:`Líquido`,groupSimilar:`Agrupar`,groupedSpools:`{{count}} carretéis idênticos`,groupedRows:`linhas`,columns:`Colunas`,configureColumns:`Configurar Colunas`,configureColumnsDesc:`Arraste para reordenar as colunas ou use as setas. Alterne a visibilidade com o ícone de olho.`,visible:`Visível`,reset:`Redefinir`,cancel:`Cancelar`,applyChanges:`Aplicar Alterações`,moveUp:`Mover para cima`,moveDown:`Mover para baixo`,hideColumn:`Ocultar coluna`,showColumn:`Mostrar coluna`,linkToSpool:`Vincular ao Carretel`,tagLinked:`Tag vinculada ao carretel`,tagLinkFailed:`Falha ao vincular tag`,tagAlreadyLinked:`Tag já vinculada ao carretel #{{id}}`,unknownTag:`Tag RFID desconhecida detectada`,usageHistory:`Histórico de Uso`,noUsageHistory:`Nenhum uso registrado ainda`,printName:`Nome da Impressão`,weightConsumed:`Peso Consumido`,clearHistory:`Limpar`,historyCleared:`Histórico de uso limpo`,fillSourceLabel:`(Inv)`,lowStockThresholdError:`O limite deve estar entre 0.1 e 99.9`,assignMismatchTitle:`Incompatibilidade de material`,assignMismatchMessage:`O material do carretel selecionado "{{spoolMaterial}}" não corresponde ao material da bandeja "{{trayMaterial}}" para {{location}}. Atribuir mesmo assim?`,assignMismatchConfirm:`Atribuir mesmo assim`,assignPartialMismatchMessage:`O material do carretel "{{spoolMaterial}}" é semelhante, mas não corresponde exatamente a "{{trayMaterial}}" em {{location}}. Deseja prosseguir?`,assignProfileMismatchMessage:`O perfil do carretel "{{spoolProfile}}" não corresponde ao perfil da bandeja "{{trayProfile}}" em {{location}}. Deseja prosseguir?`,assignReconfigureNote:`O slot do AMS será reconfigurado para usar o perfil do carretel.`,spoolmanFilamentCatalog:`Catálogo de filamentos Spoolman`,pickFromSpoolmanCatalog:`Escolher do catálogo Spoolman…`,spoolmanFilamentSelected:`Filamento selecionado do catálogo Spoolman`,spoolmanFilamentUnlinked:`Vínculo com o catálogo de filamentos removido`,noSpoolmanFilaments:`Nenhum filamento encontrado no catálogo Spoolman`,spoolmanFilamentColorSwatch:`Cor do filamento`,spoolWeightManagedBySpoolman:`O peso do carretel vazio é gerenciado por tipo de filamento no Spoolman`,spoolmanCatalogLoadFailed:`Falha ao carregar catálogo de filamentos do Spoolman`},timelapse:{title:`Timelapse`,create:`Criar Timelapse`,download:`Baixar`,delete:`Excluir`,preview:`Visualizar`,frameRate:`Taxa de Quadros`,quality:`Qualidade`,processing:`Processando...`,noTimelapses:`Nenhum timelapse disponível`},ams:{title:`AMS`,slot:`Slot`,empty:`Vazio`,emptySlot:`Slot vazio`,slotEmpty:`Vazio`,slotUnconfigured:`?`,emptySlotReset:`Nenhum carretel atribuído`,unknown:`Desconhecido`,humidity:`Umidade`,temperature:`Temperatura`,filamentType:`Tipo de Filamento`,filamentColor:`Cor`,remaining:`Restante`,history:`Histórico do AMS`,noHistory:`Nenhum histórico disponível`,configureSlot:`Configurar Slot`,externalSpool:`Carretel Externo`,profile:`Perfil`,kFactor:`Fator K`,kFactorShort:`K`,fill:`Preencher`,configure:`Configurar`,used:`usado`,remainingUnit:`restante`},printModal:{variants:{editNote:`Estas alternativas foram definidas ao enfileirar o trabalho. Cancele e enfileire de novo para alterá-las.`,title:`Alternativas de impressora`,help:`Um trabalho, uma vaga na fila. A primeira impressora compatível que ficar livre imprime o arquivo dela.`,unknownModel:`Modelo desconhecido`,plateFor:`Mesa para {{filename}}`,moveUp:`Mover para cima`,moveDown:`Mover para baixo`,queued:`Na fila com {{count}} alternativas`},selectPrinter:`Selecionar Impressora`,selectPlate:`Selecionar Placa`,filamentMapping:`Mapeamento de Filamento`,useArchiveMapping:`Mapeamento`,useArchiveMappingTooltip:`Selecionar todos os slots a partir do mapeamento de AMS salvo com este arquivo (do fatiador), em vez de corresponder por tipo/cor.`,clickToChangeSlot:`Clique para alterar a atribuição do slot`,reRead:`Reler`,plateN:`Placa {{n}}`,plateFilamentsUnreadable:`Não foi possível ler os filamentos de uma placa selecionada, portanto ela não pode ser mapeada. Desmarque-a para enfileirar as demais.`,totalCost:`Custo total:`,slotRemainingShort:` - {{grams}}g rest.`,printSettings:`Configurações de Impressão`,bedLeveling:`Nivelamento da Mesa`,flowCalibration:`Calibração de Fluxo`,vibrationCalibration:`Calibração de Vibração`,layerInspection:`Inspeção da Primeira Camada`,timelapse:`Timelapse`,cancel:`Cancelar`,noPrintersAvailable:`Nenhuma impressora disponível`,printerBusy:`Impressora ocupada`,printerOffline:`Impressora offline`,sameTypeDifferentColor:`Mesmo tipo, cor diferente`,filamentTypeNotLoaded:`Tipo de filamento não carregado`,statusReady:`Pronto`,statusColorMismatch:`Cor diferente`,statusTypeNotFound:`Tipo não encontrado`,requiredTooltip:`Necessário: {{name}} - {{color}}`,manuallySelected:`Selecionado manualmente`,autoMatched:`Correspondido automaticamente`,selectSlot:`Escolher slot`,sameTypeDifferentColorDetail:`Mesmo tipo, cor diferente: precisa de {{required}}, o slot tem {{loaded}}`,requiredTypeNotInPrinter:`Tipo de filamento necessário não encontrado na impressora.`,whenToPrint:`Quando imprimir`,asap:`O quanto antes`,queue:`Fila`,schedule:`Agendar`,dateTime:`Data e hora`,invalidDateTime:`Digite uma data e hora válidas`,openCalendar:`Abrir calendário`,requireManualStart:`Exigir início manual`,requirePreviousSuccess:`Iniciar somente se a impressão anterior foi concluída com sucesso`,autoOffAfter:`Desligar impressora ao finalizar`,helpAsap:`A impressão será adicionada ao topo da fila e começará assim que uma impressora elegível estiver ociosa.`,helpSchedule:`A impressão começará no horário agendado se a impressora estiver ociosa. Se estiver ocupada, aguardará até ficar disponível.`,helpQueue:`A impressão será adicionada ao fim da fila.`,leftNozzle:`L`,rightNozzle:`R`,leftNozzleTooltip:`Bico esquerdo`,rightNozzleTooltip:`Bico direito`,ftsSameInletHint:`Todos os filamentos desta impressão estão no comutador de trajeto de filamento IN-{{inlet}}. Trocar entre filamentos da mesma entrada é mais lento — mova um para um AMS da outra entrada.`,rackPosition:`Posição no rack`,rackPositionTooltip:`Qual bico do rack imprime este filamento. As posições são numeradas como na impressora.`,rackEmptyPosition:`Esta posição do rack está vazia`,rackWrongNozzle:`Tem um bico {{has}}; este filamento precisa de {{needs}}`,filamentOverride:`Substituição de Filamento`,filamentOverrideHint:`Substitua opcionalmente os filamentos para atribuição baseada em modelo. O agendador usará os filamentos selecionados em vez dos valores originais do 3MF.`,originalFilament:`Original`,overrideWith:`Substituir por`,resetToOriginal:`Restaurar original`,insufficientFilamentTitle:`Filamento insuficiente`,waitingForAmsStatus:`Aguardando o status do AMS de {{printer}}…`,insufficientFilamentMessage:`Alguns dos carretéis atribuídos têm menos filamento restante do que o necessário para esta impressão:`,insufficientFilamentLine:`{{printer}} - {{slot}}: necessário {{required}}g, restante {{remaining}}g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: necessário {{required}}g, {{remaining}}g disponíveis entre bobinas correspondentes (AMS Filament Backup)`,printAnyway:`Imprimir mesmo assim`,forceColorMatch:`Forçar correspondência de cor`,staggerPrinterStarts:`Escalonar inícios`,staggerGroupSize:`Tamanho do grupo`,staggerInterval:`Intervalo (min)`,staggerPreview:`{{printers}} impressoras → {{groups}} grupos de {{size}}, iniciando a cada {{interval}} min`,staggerLastGroup:`último grupo: {{count}}`,staggerTotal:`total: {{minutes}} min`,staggerToPrinters:`Escalonar para {{count}} impressoras`,gcodeInjection:`Injetar G-code de auto-impressão`,insufficientBudget:`Orçamento insuficiente`,unlimitedNoBudget:`Ilimitado – nenhum limite de orçamento foi definido.`,noPrintableCostCenters:`Não há nenhum centro de custo ativo disponível para impressão. Peça a um administrador para conceder acesso de impressão.`},backup:{includesEncryptionKey:`Backups locais incluem o arquivo da chave de criptografia MFA (DATA_DIR/.mfa_encryption_key), então o backup ZIP é autossuficiente. Trate o ZIP como sensível — quem tiver o arquivo pode descriptografar os client secrets OIDC e os segredos TOTP armazenados.`,title:`Bakup e Restauração`,createBackup:`Criar Backup`,restoreBackup:`Restaurar Backup`,restoreDescription:`Substituir todos os dados a partir de um arquivo de backup`,downloadBackup:`Baixar Backup`,uploadBackup:`Enviar Backup`,lastBackup:`Último Backup`,autoBackup:`Backup automático`,backupNow:`Fazer Backup Agora`,restoreWarning:`Aviso: Restaurar um backup substituirá todos os dados atuais.`,includeArchives:`Incluir Arquivos`,includeSettings:`Incluir Configurações`,includeProfiles:`Incluir Perfis`,backupSuccess:`Backup criado com sucesso`,restoreSuccess:`Backup restaurado com sucesso`,backupFailed:`Falha ao criar backup`,restoreFailed:`Falha ao restaurar backup`,restoreNote:`A impressora virtual será parada durante a restauração`,githubBackup:`Backup GitHub`,enabled:`Ativado`,cloudLoginRequired:`Login no Bambu Cloud necessário. Entre em Perfis → Perfis Cloud para ativar o backup GitHub.`,cloudLoginRequiredShort:`Login Cloud necessário`,githubDescription:`Sincronize automaticamente seus perfis com um repositório GitHub privado para backup e histórico de versões.`,repoIsPrivate:`O repositório é privado — seguro para backup.`,repoIsPublicWarning:`O repositório está PÚBLICO. Os backups do Bambuddy incluem credenciais MQTT, tokens do Home Assistant, tokens do Prometheus, seu e-mail do Bambu Cloud e os códigos de acesso das impressoras via K-profiles. Salvar está bloqueado até que você torne o repositório privado nas configurações do seu provedor.`,repoVisibilityUnknown:`Não foi possível determinar a visibilidade do repositório. O Bambuddy se recusa a fazer backup em qualquer destino não confirmado como privado; salvar será bloqueado.`,repositoryUrl:`URL do repositório`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Permitir HTTP inseguro`,allowInsecureHttpHint:`Ativar para instâncias auto-hospedadas em redes privadas sem TLS`,personalAccessToken:`Token de acesso pessoal`,tokenSaved:`(salvo)`,enterNewToken:`Digite um novo token para atualizar`,tokenHintGitHub:`Token de granularidade fina com acesso de leitura e escrita a Contents, ou token clássico com o escopo repo.`,tokenHintGitLab:`Token com o escopo api, ou read_repository junto com write_repository.`,tokenHintGitea:`Token com o escopo write:repository.`,tokenHintForgejo:`Token com o escopo write:repository. Um token limitado somente a este repositório já basta.`,branch:`Branch`,provider:`Provedor Git`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Apenas manual`,hourly:`A cada hora`,daily:`Diário`,weekly:`Semanal`,includeInBackup:`Incluir no backup`,kProfiles:`K-Perfis`,kProfilesDescription:`Calibração de avanço de pressão das impressoras conectadas`,noPrintersConnected:`Nenhuma impressora conectada`,printersConnected:`{{connected}}/{{total}} conectadas`,cloudProfiles:`Perfis Cloud`,cloudProfilesDescription:`Predefinições de filamento, impressora e processo do Bambu Cloud e do Orca Cloud`,cloudProfilesAccounts:`Contas conectadas — Bambu Cloud: {{bambu}}, Orca Cloud: {{orca}}`,appSettings:`Configurações do App`,appSettingsDescription:`Configuração do Bambuddy (banco de dados completo)`,spoolInventory:`Inventário de bobinas`,spoolInventoryDescription:`Bobinas de filamento, histórico de uso e rastreamento de custos`,printArchives:`Arquivos de impressão`,printArchivesDescription:`Metadados do histórico de impressão (sem arquivos gcode/3MF)`,lastBackupAt:`Último backup:`,noBackupsYet:`Nenhum backup ainda`,next:`Próximo:`,startingBackup:`Iniciando backup...`,test:`Testar`,enableBackup:`Ativar backup`,testConnection:`Testar conexão`,enterRepoUrl:`Digite a URL do repositório`,enterRepoAndToken:`Digite a URL do repositório e o token de acesso`,repoRequired:`A URL do repositório é obrigatória`,tokenRequired:`O token de acesso é obrigatório`,githubBackupEnabled:`Backup GitHub ativado`,tokenUpdated:`Token atualizado`,settingsSaved:`Configurações salvas`,failedToSave:`Falha ao salvar: {{message}}`,backupCompleteFiles:`Backup concluído - {{count}} arquivos atualizados`,backupSkippedNoChanges:`Backup ignorado - sem alterações`,backupFailed2:`Falha no backup: {{message}}`,clearedLogs:`{{count}} logs removidos`,failedToClearLogs:`Falha ao limpar logs: {{message}}`,restoreFromGit:{button:`Restaurar do Git`,title:`Restaurar do backup Git`,subtitle:`Escolha um commit e o que deve ser restaurado`,commitLabel:`Commit do backup`,latestCommit:`Backup mais recente (ponta do branch)`,categoriesLabel:`O que restaurar`,inspecting:`Lendo o conteúdo do backup...`,itemCount:`{{count}} no backup`,overwriteLabel:`Sobrescrever entradas existentes`,overwriteOn:`As entradas existentes serão atualizadas a partir do backup.`,overwriteOff:`Apenas as entradas ausentes são adicionadas; as existentes permanecem intactas.`,selectedCount:`{{count}} selecionados`,restoring:`Restaurando...`,confirmTitle:`Restaurar do backup?`,confirmMessage:`As categorias selecionadas serão restauradas deste commit. As entradas ausentes são adicionadas e as existentes permanecem como estão.`,confirmMessageOverwrite:`As categorias selecionadas serão restauradas deste commit, sobrescrevendo as entradas que já existem localmente. Não é possível desfazer.`,kprofilesOverwriteCaveat:`Os perfis K são a exceção: gravar um slot sempre substitui a calibração na impressora.`,tally:`{{restored}} restaurados, {{skipped}} ignorados, {{failed}} com falha`,reloadHint:`Recarregue o Bambuddy para que os dados restaurados apareçam em todos os lugares.`,partialHint:`As categorias listadas acima foram concluídas e estão salvas. As que faltam não chegaram a ser executadas.`,failed:`Falha na restauração.`,loadFailed:`Não foi possível ler o repositório de backup.`,details:{notPresent:`Não está presente neste commit de backup`,unreadableJson:`JSON ilegível: {{paths}}`,settingsNoPayload:`Nenhuma configuração nos dados`,settingsCredentialsWillSkip:`{{count}} chaves parecidas com credenciais serão ignoradas`,settingsCompanionWillSkip:`{{count}} chaves parecidas com credenciais serão ignoradas, e {{companion}} chaves que dependem delas ficarão desligadas`,settingsCompanionOnlyWillSkip:`{{companion}} chaves ficarão desligadas - a credencial que cada uma precisa não pode ser restaurada de um backup`,spoolsUsageCount:`incluindo {{count}} registros de consumo`,archivesMetadataOnly:`Somente metadados - arquivos 3MF e miniaturas não ficam em um backup Git`,kprofilesPrinterCount:`em {{count}} impressoras`},notes:{noData:`Não há dados desse tipo neste backup`,archivesPrinterMissing:`Alguns arquivos referenciavam impressoras que não existem mais - vínculo removido`,archivesProjectMissing:`Alguns arquivos referenciavam projetos que não existem mais - vínculo removido`,archivesOwnerCleared:`Alguns arquivos referenciavam usuários que não existem mais - o proprietário foi limpo, então eles só ficam visíveis para usuários com a permissão archives:read_all até que um administrador os reatribua`,archivesOwnerUnmatched:`Alguns arquivos apontam para um proprietário que esta instância não tem - o proprietário foi limpo em vez de deduzido do id de usuário da cópia, então eles só ficam visíveis para usuários com a permissão archives:read_all até que um administrador os reatribua`,archivesOwnerUnknown:`Alguns arquivos foram restaurados sem proprietário - este backup não registra nenhum, então eles só ficam visíveis para usuários com a permissão archives:read_all até que um administrador os atribua`,archivesUndeleted:`Arquivos excluídos desde o backup voltaram a ficar visíveis - a sobrescrita estava ligada`,archivesMetadataOnly:`Os arquivos restaurados contêm apenas metadados - os arquivos 3MF e as miniaturas não ficam em um backup Git`,spoolUsageUnresolved:`{{count}} registros de consumo ignorados - o carretel deles não está na lista de carretéis deste backup, então não há a que vinculá-los.`,spoolUsageUnlinked:`{{count}} registros de consumo restaurados sem o vínculo com o histórico de impressão - selecione Arquivos de impressão junto com Inventário de carretéis para mantê-lo.`,spoolTagKept:`{{count}} etiquetas de carretel foram mantidas como estavam - o backup teria apagado uma etiqueta lida desde então, ou a teria movido para um segundo carretel.`,settingsCredentialsSkipped:`{{count}} chaves parecidas com credenciais ignoradas - digite os segredos novamente à mão`,settingsAuthSkipped:`{{count}} configurações de autenticação ignoradas - altere-as em Configurações > Autenticação para que as verificações de bloqueio continuem valendo`,settingsCompanionSkipped:`{{keys}} ficaram desligados - a credencial que cada um precisa não pode ser restaurada de um backup e esta instância não tem nenhuma armazenada, então ligá-los deixaria a integração sem autenticação`,settingsMqttRelayFailed:`Configurações MQTT restauradas, mas o relay não pôde ser reconectado - reinicie o Bambuddy`,kprofilesAlwaysOverwrite:`Os perfis K sempre sobrescrevem o slot correspondente na impressora`,kprofilesAckUnreliable:`Uma impressora que não responde ainda conta como restaurada - verifique os perfis na impressora`,kprofilesPrinterMissing:`Nenhuma impressora com o número de série {{serial}} - ignorado`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) não está conectada - ignorado`,kprofilesUnknownNozzle:`Diâmetro de bico inesperado {{nozzle}} para {{serial}} - enviado como está`,kprofilesUnmatched:`{{count}} perfis para {{nozzle}} não tinham correspondente em {{printer}} - adicionados como novos perfis`,kprofilesSendFailed:`Não foi possível enviar os perfis de {{nozzle}} para {{printer}} ({{serial}})`,kprofilesRefused:`{{printer}} ({{serial}}) recusou os perfis de {{nozzle}}: {{reason}}`,kprofilesStepFailed:`Não foi possível concluir a etapa dos perfis K - {{reason}}. O que foi restaurado antes continua salvo.`}},history:`Histórico`,clear:`Limpar`,date:`Data`,status:`Status`,trigger:`Tipo`,triggers:{manual:`Backup manual`,scheduled:`Backup agendado`,restore:`Restauração`},commit:`Commit`,localBackup:`Backup local`,localBackupDescription:`Crie um backup completo dos seus dados do Bambuddy incluindo banco de dados, arquivos, uploads e todos os ficheiros.`,downloadBackupLabel:`Baixar backup`,completeBackupZip:`Backup completo: banco de dados + todos os arquivos (ZIP)`,download:`Baixar`,preparingBackup:`Preparando backup...`,creatingArchive:`Criando arquivo de backup... Isso pode demorar para backups grandes.`,downloadingFile:`Baixando arquivo de backup...`,backupDownloaded:`Backup baixado com sucesso`,failedToCreateBackup:`Falha ao criar backup: {{message}}`,restore:`Restaurar`,restoreReplacesAll:`A restauração substitui todos os dados.`,restoreReplacesAllDetail:`Seu banco de dados e arquivos atuais serão completamente substituídos. É necessário reiniciar após a restauração.`,restoreConfirmTitle:`Restaurar backup`,restoreConfirmMessage:`Tem certeza de que deseja restaurar de "{{filename}}"? Isso substituirá completamente seu banco de dados e todos os arquivos. O aplicativo precisará ser reiniciado após a restauração.`,restoreConfirmButton:`Restaurar backup`,uploadingFile:`Enviando arquivo de backup...`,backupRestoredRestart:`Backup restaurado. Por favor, reinicie o Bambuddy.`,failedToRestore:`Falha ao restaurar backup. Verifique o formato do arquivo.`,reloadNow:`Recarregar agora`,creatingBackup:`Criando backup`,restoringBackup:`Restaurando backup`,preparing:`Preparando...`,processing:`Processando...`,doNotClosePage:`Por favor, não feche esta página nem navegue para outro lugar. Esta operação pode levar vários minutos para backups grandes.`,restoring:`Restaurando...`,restoreComplete:`Restauração concluída`,restoreFailed2:`Falha na restauração`,importSettings:`Importar configurações de um arquivo de backup`,pleaseWaitRestoring:`Aguarde enquanto seus dados estão sendo restaurados`,selectBackupFile:`Clique para selecionar um arquivo de backup (.json ou .zip)`,duplicateHandling:`Como funciona o tratamento de duplicatas:`,matchPrinters:`Impressoras`,matchPrintersBy:`correspondência por número de série`,matchSmartPlugs:`Tomadas inteligentes`,matchSmartPlugsBy:`correspondência por endereço IP`,matchNotificationProviders:`Provedores de notificação`,matchNotificationProvidersBy:`correspondência por nome`,matchFilaments:`Filamentos`,matchFilamentsBy:`correspondência por nome + tipo + marca`,matchArchives:`Arquivos`,matchArchivesBy:`correspondência por hash de conteúdo (sempre ignorado)`,matchPendingUploads:`Uploads pendentes`,matchPendingUploadsBy:`correspondência por nome do arquivo`,matchSettingsTemplates:`Configurações e modelos`,matchSettingsTemplatesBy:`sempre sobrescritos`,replaceExisting:`Substituir dados existentes`,keepExisting:`Manter dados existentes`,overwriteDescription:`Sobrescrever itens que já existem com dados do backup`,keepDescription:`Restaurar apenas itens que ainda não existem`,overwriteCaution:`Cuidado:`,overwriteWarning:`A sobrescrita substituirá suas configurações atuais pelos dados do backup. Códigos de acesso das impressoras nunca são sobrescritos por segurança.`,cancel:`Cancelar`,processingBackup:`Processando arquivo de backup...`,itemsRestored:`Itens restaurados`,itemsSkipped:`Itens ignorados`,restored:`Restaurados`,skippedAlreadyExist:`Ignorados (já existem)`,filesCategory:`Arquivos (3MF, miniaturas, etc.)`,andMore:`...e mais {{count}}`,newApiKeysGenerated:`Novas chaves API geradas`,keysShownOnce:`Estas chaves são exibidas apenas uma vez. Copie-as agora!`,copy:`Copiar`,noDataFound:`Nenhum dado para restaurar foi encontrado no arquivo de backup.`,close:`Fechar`,scheduledBackup:`Backups agendados`,scheduledBackupDescription:`Cria automaticamente snapshots de backup conforme agendamento. O diretório de saída pode ser montado em um NAS ou armazenamento externo.`,frequency:`Frequência`,backupTime:`Tempo`,retention:`Retenção`,retentionDescription:`Número de backups a manter`,outputPath:`Caminho de saída`,outputPathPlaceholder:`Padrão: {{path}}`,outputPathDescription:`Deixe em branco para o local padrão`,runNow:`Executar agora`,backupFiles:`Arquivos de backup`,noScheduledBackups:`Sem backups ainda`,deleteBackup:`Excluir`,deleteBackupConfirm:`Excluir este arquivo de backup?`,backupRunning:`Backup em andamento...`,scheduledBackupComplete:`Backup concluído com sucesso`,scheduledBackupFailed:`Falha no backup`,nextBackup:`Próximo backup`,backupSize:`Tamanho`,localTimeHint:`Horário local ({{tz}})`,defaultPathLabel:`Padrão:`,pathCheck:{title:`O Bambuddy não consegue gravar neste diretório`,howToFix:`Como corrigir:`,sandboxed:`O serviço do Bambuddy não consegue gravar em {{path}}. Sua unit do systemd roda com ProtectSystem=strict, o que torna todo diretório fora dos diretórios de instalação, dados e logs somente leitura para o serviço - mesmo um em que você consegue gravar pelo seu próprio shell.`,read_only:`{{path}} está em um sistema de arquivos somente leitura.`,permission_denied:`O Bambuddy não tem permissão para gravar em {{path}}. Verifique o dono e as permissões do diretório.`,no_space:`O sistema de arquivos que contém {{path}} está cheio.`,not_a_directory:`{{path}} existe, mas não é um diretório.`,missing:`{{path}} não existe e não pôde ser criado.`,error:`O Bambuddy não consegue gravar em {{path}}.`,ephemeralTitle:`Estes backups não sobrevivem à recriação do contêiner`,container_ephemeral:`{{path}} está dentro do contêiner do Bambuddy, não no host. Backups gravados ali são perdidos quando o contêiner é recriado. Monte o diretório do host:`},categories:{settings:`Configurações`,notification_providers:`Provedores de notificação`,notification_templates:`Modelos de notificação`,smart_plugs:`Tomadas inteligentes`,printers:`Impressoras`,filaments:`Filamentos`,maintenance_types:`Tipos de manutenção`,archives:`Arquivos`,projects:`Projetos`,pending_uploads:`Uploads pendentes`,external_links:`Links externos`,api_keys:`Chaves API`}},tags:{title:`Etiquetas`,addTag:`Adicionar Tag`,editTag:`Editar Tag`,deleteTag:`Excluir Tag`,tagName:`Nome da Tag`,tagColor:`Cor da Tag`,noTags:`Nenhuma tag`,deleteConfirm:`Tem certeza de que deseja excluir esta tag?`,manageTags:`Gerenciar Tags`},uploadModal:{title:`Upload Arquivos 3MF`,dragDrop:`Arraste e solte arquivos .3mf aqui`,or:`ou`,browseFiles:`Procurar Arquivos`,extractionInfo:`O modelo da impressora será extraído automaticamente dos metadados do arquivo 3MF.`,uploaded:`enviado`,failed:`falhou`,uploading:`Enviando...`,upload:`Enviar`,uploadFailed:`Falha no envio`},editArchive:{title:`Editar Arquivo`,name:`Nome`,namePlaceholder:`Nome da impressão`,printer:`Impressora`,noPrinter:`Nenhuma impressora`,project:`Projeto`,noProject:`Nenhum projeto`,itemsPrinted:`Itens Impressos`,itemsPrintedHelp:`Número de itens produzidos neste trabalho de impressão. Use 0 se a placa inteira foi perdida.`,filamentUsed:`Filamento usado (g)`,filamentUsedPlaceholder:`ex.: 46.16`,filamentUsedHelp:`Informe manualmente quando uma impressão for arquivada sem o 3MF, para que ela ainda conte nos totais de filamento. Reescanear um arquivo que tem o 3MF lê o valor novamente do arquivo.`,notes:`Notas`,notesPlaceholder:`Adicione notas sobre esta impressão...`,externalLink:`Link Externo`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Link para Printables, Thingiverse ou outra fonte`,tags:`Etiquetas`,tagsPlaceholder:`Adicionar tags...`,addMoreTags:`Adicionar mais tags...`,matchingTags:`Correspondendo "{{query}}"`,existingTags:`Tags existentes`,clickToAdd:`(clique para adicionar)`,status:`Status`,failureReason:`Motivo da Falha`,selectReason:`Selecione o motivo...`,photos:`Fotos do Resultado da Impressão`,photosHelp:`Clique em + para adicionar fotos do seu resultado impresso`,printResult:`Resultado da Impressão`,saving:`Salvando...`,failureReasons:{adhesionFailure:`Falha de adesão`,spaghettiDetached:`Spaghetti / Destacado`,layerShift:`Deslocamento de camada`,cloggedNozzle:`Bico entupido`,filamentRunout:`Fim do filamento`,warping:`Empenamento`,stringing:`Fios`,underExtrusion:`Subextrusão`,powerFailure:`Falha de energia`,userCancelled:`Cancelado pelo usuário`,noStatusUpdate:`Nenhuma atualização de status recebida`,other:`Outro`},statuses:{completed:`Concluído`,failed:`Falhou`,aborted:`Cancelado`,printing:`Imprimindo`}},kProfiles:{title:`Perfis K`,noPrintersConfigured:`Nenhuma impressora configurada`,addPrinterInSettings:`Adicione uma impressora nas Configurações para gerenciar K-profiles`,noActivePrinters:`Nenhuma impressora ativa`,enablePrinterConnection:`Ative a conexão da impressora para visualizar seus K-profiles`,loadingProfiles:`Carregando K-Profiles...`,printerOffline:`Impressora Offline`,printerOfflineDesc:`A impressora selecionada não está conectada. Ligue-a para visualizar os K-profiles.`,noMatchingProfiles:`Nenhum Perfil Correspondente`,noMatchingProfilesDesc:`Nenhum perfil corresponde aos seus critérios de pesquisa`,noKProfiles:`Nenhum K-Profile`,noKProfilesDesc:`Nenhum perfil de avanço de pressão encontrado para bico de {{diameter}}mm`,createFirstProfile:`Criar Primeiro Perfil`,printer:`Impressora`,nozzle:`Bico`,refresh:`Atualizar`,addProfile:`Adicionar Perfil`,export:`Exportar`,import:`Importar`,select:`Selecionar`,selectAll:`Selecionar Todos`,delete:`Excluir`,searchPlaceholder:`Pesquisar por nome ou filamento...`,allExtruders:`Todos os Extrusores`,leftOnly:`Apenas Esquerdo`,rightOnly:`Apenas Direito`,allFlow:`Todo Fluxo`,hfOnly:`Apenas HF`,sOnly:`Apenas S`,sortName:`Ordenar: Nome`,sortKValue:`Ordenar: Valor K`,sortFilament:`Ordenar: Filamento`,leftExtruder:`Extrusor Esquerdo`,rightExtruder:`Extrusor Direito`,modal:{addTitle:`Adicionar K-Profile`,editTitle:`Editar K-Profile`,profileName:`Nome do Perfil`,profileNamePlaceholder:`Meu Perfil PLA`,kValue:`Valor K`,kValuePlaceholder:`0.020`,kValueHelp:`Faixa típica: 0.01 - 0.06 para PLA, 0.02 - 0.10 para PETG`,filament:`Filamento`,selectFilament:`Selecionar filamento...`,source:{local:`Importado`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Integrado`},noFilamentsHelp:`Nenhum filamento disponível. Entre na Bambu Cloud ou importe predefinições em Perfis → Perfis Locais.`,searchFilaments:`Buscar filamentos...`,noFilamentMatches:`Nenhum filamento corresponde a essa busca`,flowType:`Tipo de Fluxo`,highFlow:`Alto Fluxo`,standard:`Padrão`,nozzleSize:`Tamanho do Bico`,extruder:`Extrusor`,extruders:`Extrusores`,left:`Esquerdo`,right:`Direito`,notes:`Notas (armazenadas localmente)`,notesPlaceholder:`Adicione notas sobre este perfil...`,notesHelp:`As notas são salvas no Bambuddy, não na impressora`,syncing:`Sincronizando com a impressora...`,savingExtruder:`Salvando no extrusor {{current}}/{{total}}...`,pleaseWait:`Por favor, aguarde`},deleteConfirm:{title:`Excluir Perfil`,cannotUndo:`Isso não pode ser desfeito`,message:`Tem certeza de que deseja excluir "{{name}}" da impressora?`},bulkDelete:{title:`Excluir Perfis`,cannotUndo:`Isso não pode ser desfeito`,message:`Tem certeza de que deseja excluir {{count}} perfis selecionados da impressora?`},toast:{profileSaved:`K-profile salvo`,profilesSaved:`K-profile salvo em {{count}} extrusores`,selectAtLeastOneExtruder:`Por favor, selecione pelo menos um extrusor`,selectFilament:`Selecione um filamento primeiro`,filamentNotResolvable:`Sem ID de filamento Bambu para {{name}} — a impressora não consegue armazenar um perfil`,profileDeleted:`K-profile excluído`,profilesDeleted:`{{count}} perfis excluídos`,exportedProfiles:`{{count}} perfis exportados`,importedProfiles:`{{count}} de {{total}} perfis importados`,noProfilesToExport:`Nenhum perfil para exportar`,invalidFileFormat:`Formato de arquivo inválido`,failedToParseImport:`Falha ao analisar o arquivo de importação`,failedToSaveBatch:`Falha ao salvar K-profiles`,noteSaved:`Nota salva`,failedToSaveNote:`Falha ao salvar nota`},permission:{noRead:`Você não tem permissão para atualizar perfis`,noCreate:`Você não tem permissão para adicionar perfis`,noUpdate:`Você não tem permissão para atualizar K-profiles`,noDelete:`Você não tem permissão para excluir K-profiles`,noExport:`Você não tem permissão para exportar perfis`,noImport:`Você não tem permissão para importar perfis`}},virtualPrinter:{title:`Impressora Virtual`,running:`Em execução`,stopped:`Parada`,description:{default:`Ative uma impressora virtual que aparece no Bambu Studio e no OrcaSlicer. Os arquivos enviados para esta impressora serão arquivados diretamente sem impressão.`,proxy:`Ative um proxy que retransmite o tráfego do slicer para uma impressora real, permitindo impressão remota em qualquer rede.`},enable:{title:`Ativar Impressora Virtual`,visibleInSlicer:`Visível como "Bambuddy" na descoberta do slicer`,proxyingTo:`Proxy para {{name}}`,notActive:`Não ativo`},model:{title:`Modelo da Impressora`,description:`Selecione qual modelo de impressora emular.`,restartWarning:`Alterar o modelo reiniciará a impressora virtual`},accessCode:{title:`Código de acesso`,isSet:`O código de acesso está definido`,notSet:`Nenhum código de acesso definido — necessário para ativar.`,placeholder:`Digite um código de 8 caracteres`,placeholderChange:`Digite um novo código para alterar`,hint:`Deve ter exatamente 8 caracteres. Usado pelos slicers para autenticação.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Herdado da impressora alvo`,derivedFromTargetHint:`Usa o código de acesso da impressora alvo. A ponte encaminha a autenticação do slicer para a impressora real, então os códigos precisam corresponder — edite o código nas configurações da impressora para alterá-lo.`,reveal:`Mostrar código de acesso`,hide:`Ocultar código de acesso`},targetPrinter:{title:`Impressora Alvo`,configured:`Proxy alvo configurado`,notConfigured:`Nenhuma impressora alvo selecionada - necessário para o modo proxy`,placeholder:`Selecione uma impressora...`,hint:`Selecione a impressora para a qual o tráfego do slicer será enviado. A impressora deve estar no modo LAN.`,noPrinters:`Nenhuma impressora configurada. Adicione uma impressora primeiro para usar o modo proxy.`},remoteInterface:{title:`Substituição da Interface de Rede`,configured:`Substituição da interface ativa`,optional:`Opcional - use se o IP detectado automaticamente estiver errado (por exemplo, várias NICs, Docker, VPN)`,placeholder:`Detecção automática (padrão)...`,hint:`Substitua o endereço IP anunciado via SSDP e usado no certificado TLS. Útil quando o Bambuddy possui várias interfaces de rede.`},mode:{title:`Modo`,archive:`Arquivar`,archiveDesc:`Arquivar arquivos imediatamente`,review:`Revisar`,reviewDesc:`Revisar antes de arquivar`,queue:`Fila`,queueDesc:`Arquivar e adicionar à fila`,proxy:`Proxy`,proxyDesc:`Retransmitir para impressora real`},autoDispatch:{title:`Envio automático`,description:`Iniciar impressões automaticamente quando adicionadas à fila. Quando desativado, as impressões aguardam envio manual.`},queueForceColorMatch:{title:`Forçar correspondência de cor`,description:`Recusa enviar para uma impressora que não tenha exatamente o tipo e cor de filamento carregados. Desativado por padrão — sem isto, a fila usa apenas correspondência por modelo e pode escolher uma impressora com a cor errada carregada.`},saveAmsMapping:{title:`Salvar mapeamento de AMS`,description:`Persiste a escolha de slot AMS feita pelo próprio fatiador (do comando MQTT project_file) no arquivo, para que uma reimpressão posterior reutilize o mesmo carretel físico em vez de derivá-lo novamente do tipo/cor do arquivo. Desativado por padrão.`},gcodeInjection:{title:`Injeção de G-code`,description:`Aplica os trechos de G-code configurados por modelo nas Configurações aos trabalhos deste VP. Desativado por padrão.`},tailscaleDisabled:{title:`Integração Tailscale`,description:`Ative para marcar este VP como exposto via Tailscale. Mostra o endereço Tailscale do host para você saber qual IP colar no fatiador. A etapa de importação CA é inalterada — este toggle não afeta certificados.`},setupRequired:{title:`Configuração Necessária`,description:`O recurso de impressora virtual requer configuração adicional do sistema antes de funcionar. Isso inclui encaminhamento de portas, regras de firewall e configurações específicas da plataforma.`,readGuide:`Leia o guia de configuração antes de ativar`},howItWorks:{title:`Como funciona`,step1:`Complete o guia de configuração para sua plataforma`,step2:`Ative a impressora virtual e defina um código de acesso`,step3:`No Bambu Studio ou OrcaSlicer, vá para "Adicionar Impressora"`},status:{title:`Detalhes do Status`,printerName:`Nome da Impressora`,model:`Modelo`,serialNumber:`Número de Série`,mode:`Modo`,pendingFiles:`Arquivos Pendentes`,targetPrinter:`Impressora Alvo`,ftpPort:`Porta FTP`,mqttPort:`Porta MQTT`,ftpConnections:`Conexões FTP`,mqttConnections:`Conexões MQTT`},toast:{updated:`Configurações da impressora virtual atualizadas`,failedToUpdate:`Falha ao atualizar as configurações`,copyFailed:`Falha ao copiar — selecione o texto manualmente`,accessCodeRequired:`Defina um código de acesso primeiro`,targetPrinterRequired:`Selecione uma impressora alvo primeiro`,bindIpRequired:`Defina um IP de ligação primeiro`,accessCodeEmpty:`O código de acesso não pode estar vazio`,accessCodeLength:`O código de acesso deve ter exatamente 8 caracteres`,targetCodeChangedRebind:`O código de acesso agora corresponde à nova impressora alvo. Adicione este dispositivo novamente no seu slicer para usar o novo código.`,created:`Impressora virtual criada`,failedToCreate:`Falha ao criar impressora virtual`,deleted:`Impressora virtual excluída`,failedToDelete:`Falha ao excluir impressora virtual`},list:{title:`Impressoras Virtuais`,add:`Adicionar`,addFirst:`Adicionar Impressora Virtual`,empty:`Nenhuma impressora virtual configurada. Adicione uma para começar.`},bindIp:{title:`Interface de Rede`,placeholder:`Selecionar interface...`,hint:`Interface de rede para esta impressora virtual. Deve ser única por impressora.`},proxy:{accessCodeHint:`No modo proxy, use o código de acesso da impressora alvo no slicer. A conexão é encaminhada de forma transparente para a impressora real.`},addDialog:{title:`Adicionar Impressora Virtual`,name:`Nome`,hint:`Você pode configurar o código de acesso, impressora alvo e outras configurações após a criação.`,create:`Criar`},deleteConfirm:{title:`Excluir Impressora Virtual`,message:`Tem certeza que deseja excluir "{{name}}"? Isso irá parar todos os serviços desta impressora.`},archiveNameSource:{title:`Origem do nome do arquivo`,description:`Escolha como os novos arquivos são nomeados quando chegam pela impressora virtual. "Metadados" usa o título embutido pelo slicer no 3MF (padrão). "Nome do arquivo" usa o nome que o Bambu Studio enviou via FTP. Nota: o Bambu Studio sobrescreve o nome digitado no diálogo "enviar para impressora" com o campo Título do 3MF quando presente, portanto ambos os modos costumam produzir a mesma string.`,metadata:`Metadados`,filename:`Nome do arquivo`},caCert:{title:`Certificado do slicer`,description:`As impressoras virtuais usam um certificado TLS assinado pela CA do Bambuddy. Importe este certificado CA para o armazenamento de confiança do seu slicer uma única vez para que ele aceite a conexão — sem precisar copiá-lo pela linha de comando.`,copy:`Copiar`,copied:`Copiado`,download:`Baixar`,fingerprint:`SHA-256`}},modelViewer:{openInSlicer:`Abrir no Slicer`,openInSlicerWith:`Abrir em {{slicer}}`,moreSlicerOptions:`Mais opções de fatiador`,openInSlicerFailed:`Não foi possível abrir no fatiador`,tabs:{model:`Modelo 3D`},notAvailable:`Não disponível`,plates:`Placas`,allPlates:`Todas as Placas`,plateNumber:`Placa {{number}}`,plateCount:`{{count}} placa`,plateCount_other:`{{count}} placas`,objectCount:`{{count}} objeto`,objectCount_other:`{{count}} objetos`,filamentCount:`{{count}} filamento`,filamentCount_other:`{{count}} filamentos`,eta:`ETA {{minutes}} min`,noPreview:`Pré-visualização não disponível para este arquivo`,pagination:{pageOf:`Página {{current}} de {{total}}`,prev:`Anterior`,next:`Próximo`},errors:{failedToLoad:`Falha ao carregar o arquivo`,noMeshes:`Nenhuma malha encontrada no arquivo 3MF`,unsupportedFormat:`Formato de arquivo não suportado`}},maintenanceDescriptions:{lubricateCarbonRods:`Aplique lubrificante nos eixos de carbono para um movimento suave`,lubricateRails:`Aplique lubrificante nos trilhos lineares para um movimento suave`,cleanNozzle:`Limpe o hotend e o bico para evitar entupimentos`,checkBelts:`Verifique a tensão das correias para impressões precisas`,cleanBuildPlate:`Limpe a placa de construção para melhor adesão`,checkExtruder:`Verifique as engrenagens do extrusor quanto ao desgaste`,checkCooling:`Verifique se os ventiladores de resfriamento estão funcionando corretamente`,generalInspection:`Inspeção geral da impressora`,cleanCarbonRods:`Limpe os eixos de carbono para reduzir o atrito`,lubricateSteelRods:`Aplique lubrificante nas barras de aço para um movimento suave`,cleanSteelRods:`Limpe as barras de aço para reduzir o atrito`,cleanLinearRails:`Limpe os trilhos lineares para remover poeira e detritos`,checkPtfeTube:`Verifique o tubo PTFE quanto ao desgaste ou danos`,replaceHepaFilter:`Substitua o filtro HEPA para qualidade do ar`,replaceCarbonFilter:`Substitua o filtro de carbono ativado`,lubricateLeftNozzleRail:`Lubrifique o trilho do bico esquerdo (série H2)`},haSensors:{label:`Sensores`,unavailable:`Indisponível`,blocksPrints:`{{entity}} — segura as impressões enquanto houver alerta`,states:{open:`Aberto`,closed:`Fechado`,unlocked:`Destrancado`,locked:`Trancado`,detected:`Detectado`,clear:`Livre`,wet:`Molhado`,dry:`Seco`,problem:`Problema`,ok:`OK`,running:`Em funcionamento`,stopped:`Parado`,on:`Ligado`,off:`Desligado`},sectionTitle:`Sensores do Home Assistant (impressoras)`,add:`Adicionar sensor`,addTitle:`Adicionar sensor do Home Assistant`,editTitle:`Editar sensor do Home Assistant`,empty:`Nenhum sensor ainda. Vincule um contato de porta ou um termômetro do Home Assistant para exibi-lo no cartão da impressora.`,unknownPrinter:`Impressora desconhecida`,badgeBlocks:`Segura impressões`,badgeNotifies:`Notifica`,badgeHidden:`Oculto no cartão`,printer:`Impressora`,entity:`Entidade`,searchPlaceholder:`Buscar entidades...`,noEntities:`Nenhuma entidade correspondente`,name:`Nome exibido`,alertWhen:`Alertar quando`,alertNever:`Nunca — apenas exibir`,alertAbove:`Acima de`,alertBelow:`Abaixo de`,alertHint:`O estado de alerta destaca o sensor no cartão da impressora e habilita as opções abaixo.`,showOnCard:`Mostrar no cartão da impressora`,notifyOnAlert:`Enviar uma notificação quando o alerta começar`,blockPrint:`Segurar as impressões na fila enquanto houver alerta`,blockPrintHint:`Os trabalhos permanecem na fila e começam sozinhos quando o sensor normaliza. Ignorado enquanto o Home Assistant estiver inacessível.`,toast:{created:`Sensor adicionado`,updated:`Sensor salvo`,deleted:`Sensor removido`},error:{pickEntity:`Escolha uma entidade do Home Assistant`,nameRequired:`Informe um nome exibido`,printerRequired:`Escolha uma impressora`,alertRequired:`Defina primeiro uma condição de alerta`}},locationHaSensors:{sectionTitle:`Sensores do Home Assistant (locais de armazenamento)`,sectionDescription:`Vincule sensores de temperatura, umidade ou bateria do Home Assistant aos seus locais de armazenamento para exibir leituras em tempo real no cartão do filamento e na tabela. É permitido apenas um sensor por categoria em cada local.`,add:`Adicionar sensor`,addTitle:`Adicionar sensor do Home Assistant`,editTitle:`Editar sensor do Home Assistant`,empty:`Nenhum sensor ainda. Vincule um sensor de temperatura ou umidade do Home Assistant para exibi-lo no cartão do filamento.`,unknownLocation:`Local desconhecido`,location:`Local de armazenamento`,showOnCard:`Mostrar no cartão do filamento`,overwriteConfirm:{title:`Substituir o sensor existente?`,messageTemperature:`"{{location}}" já tem um sensor de temperatura vinculado: {{name}}. Continuar irá substituí-lo.`,messageHumidity:`"{{location}}" já tem um sensor de umidade vinculado: {{name}}. Continuar irá substituí-lo.`,messageBattery:`"{{location}}" já tem um sensor de bateria vinculado: {{name}}. Continuar irá substituí-lo.`},autoAdd:{confirmTitle:`Adicionar também os outros sensores?`,confirmMessage:`O Bambuddy também encontrou outros sensores para este local. Escolha quais adicionar também.`,added:`Também adicionado: {{names}}`,noneFound:`Nenhum sensor de temperatura, umidade ou bateria correspondente foi encontrado para este local.`,onlyThisOne:`Apenas este`},options:{buttonLabel:`Opções do sensor`,title:`Opções do Sensor de Local`,description:`Esses valores são usados quando um sensor de temperatura, umidade ou bateria é vinculado automaticamente junto com o primeiro sensor de um local.`,generalSettings:`Configurações gerais`,pollInterval:`Intervalo de atualização (segundos)`,pollIntervalHint:`Com que frequência o Bambuddy consulta o Home Assistant e atualiza os valores dos sensores na tela. Mínimo de 60 segundos.`,colorizeValues:`Colorir os valores dos sensores de acordo com seus limites de alerta`,aboveColor:`Cor acima do limite`,belowColor:`Cor abaixo do limite`,optimalColor:`Cor para o valor ideal`,colors:{red:`Vermelho`,orange:`Laranja`,yellow:`Amarelo`,green:`Verde`,blue:`Azul`,purple:`Roxo`,pink:`Rosa`},saved:`Opções salvas`,saveFailed:`Falha ao salvar as opções`,reset:`Redefinir`,resetConfirm:{title:`Redefinir todos os sensores de local existentes?`,message:`Isso sobrescreve os limites de alerta, notificações e visibilidade no cartão de todos os sensores de temperatura, umidade e bateria de locais existentes com os valores configurados acima, e restaura o nome de cada sensor para o nome amigável do Home Assistant — os sensores de impressora não são afetados. Isso não pode ser desfeito. Dependendo da quantidade de sensores, isso pode levar um momento.`},resetDone:`Aplicado a {{count}} sensores de local`,resetFailed:`Falha ao redefinir os sensores de local`},deleteAllConfirm:{title:`Excluir todos os sensores?`,message:`Isso remove todos os {{count}} sensores vinculados a "{{location}}". Esta ação não pode ser desfeita.`},currentlyBound:`Atualmente vinculado: {{entity}}`,error:{locationRequired:`Escolha um local de armazenamento`},toast:{created:`Sensor adicionado`,updated:`Sensor salvo`,deleted:`Sensor removido`}},smartPlugs:{offline:`Offline`,admin:`Administrador`,openPlugAdminPage:`Abrir o painel de administração da tomada inteligente`,deleteSmartPlug:`Excluir Tomada Inteligente`,turnOnSmartPlug:`Ligar Tomada Inteligente`,turnOffSmartPlug:`Desligar Tomada Inteligente`,turnOn:`Ligar`,turnOff:`Desligar`,addSmartPlug:{scanningNetwork:`Procurando na rede...`,chooseEntity:`Escolha uma entidade...`,connectionFailed:`Falha na conexão`,searchEntities:`Pesquisar entidades...`,searchPowerSensors:`Pesquisar sensores de energia...`,searchEnergySensors:`Pesquisar sensores de energia...`,placeholders:{plugName:`Tomada da Sala`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Mesmo que o tópico de energia, ou diferente`}},linkedTo:`Vinculado a:`,monitorOnly:`Apenas monitoramento`,alerts:`Alertas`,scheduleOn:`Ligar {{time}}`,scheduleOff:`Desligar {{time}}`,on:`Ligado`,off:`Desligado`,power:`Potência`,kwhToday:`kWh Hoje`,settings:`Configurações`,automationSettings:`Configurações de automação`,showInSwitchbar:`Mostrar na barra de interruptores`,quickAccessSidebar:`Acesso rápido pela barra lateral`,enabled:`Ativado`,enableAutomation:`Ativar automação para este plugue`,autoOn:`Auto Ligar`,autoOnDescription:`Ligar quando a impressão iniciar`,autoOff:`Auto Desligar`,autoOffDescription:`Desligar quando a impressão terminar (única vez)`,autoOffPersistent:`Manter ativado`,autoOffPersistentDescription:`Permanecer ativado entre impressões em vez de única vez`,controlsPrinterPower:`Alimenta a impressora`,controlsPrinterPowerDescription:`Desative se esta tomada alimenta apenas um acessório (ventoinha do filtro, luzes). Caso contrário, desligá-la marca a impressora como offline.`,autoOffAfterDrying:`Desligar Após Secagem`,autoOffAfterDryingDescription:`Desligar quando a secagem do AMS terminar`,delayAfterDryingMinutes:`Atraso após secagem (minutos)`,turnOffDelayMode:`Modo de atraso para desligar`,time:`Tempo`,temp:`Temp.`,delayMinutes:`Atraso (minutos)`,tempThreshold:`Limite de temperatura (°C)`,tempThresholdDescription:`Desliga quando o bico esfria abaixo desta temperatura`,edit:`Editar`,deleteConfirm:`Tem certeza que deseja excluir "{{name}}"? Esta ação não pode ser desfeita.`,turnOnConfirm:`Tem certeza que deseja ligar "{{name}}"?`,turnOffConfirm:`Tem certeza que deseja desligar "{{name}}"? Isso cortará a energia do dispositivo conectado.`,failedToTurn:`Falha ao {{action}} "{{name}}"`,unknown:`Desconhecido`,addTitle:`Adicionar plugue inteligente`,editTitle:`Editar plugue inteligente`,stopScanning:`Parar varredura`,discoverTasmota:`Descobrir dispositivos Tasmota`,foundDevices:`{{count}} dispositivo(s) encontrado(s) - clique para selecionar:`,noDevicesFound:`Nenhum dispositivo Tasmota encontrado na sua rede`,haNotConfigured:`Home Assistant não está configurado. Configure em`,haSettingsPath:`Configurações → Rede → Home Assistant`,selectEntity:`Selecionar entidade *`,ipAddress:`Endereço IP *`,nameLabel:`Nome *`,username:`Usuário`,password:`Senha`,authHint:`Deixe vazio se seu dispositivo Tasmota não requer autenticação`,linkToPrinter:`Vincular à impressora`,noPrinter:`Sem impressora (apenas controle manual)`,linkingDescription:`A vinculação permite ligar/desligar automaticamente ao iniciar/terminar impressão`,powerAlerts:`Alertas de potência`,alertAbove:`Alertar se acima (W)`,alertBelow:`Alertar se abaixo (W)`,alertDescription:`Receba notificações quando o consumo de energia ultrapassar estes limites. Deixe vazio para desativar essa direção.`,dailySchedule:`Programação diária`,turnOnAt:`Ligar às`,turnOffAt:`Desligar às`,scheduleDescription:`Ligar/desligar automaticamente o plugue nestes horários diariamente. Deixe vazio para pular essa ação.`,showOnPrinterCard:`Mostrar no cartão da impressora`,displayOnPrinterCard:`Exibir botão no cartão da impressora`,connectedResult:`Conectado!`,deviceLabel:`Dispositivo: {{name}} - `,stateLabel:`Estado: {{state}}`,test:`Testar`,delete:`Excluir`,save:`Salvar`,add:`Adicionar`,cancel:`Cancelar`,failedToStartScan:`Falha ao iniciar varredura`,nameRequired:`Nome é obrigatório`,entityRequired:`Entidade é obrigatória para plugues Home Assistant`,mqttTopicRequired:`Pelo menos um tópico MQTT deve ser configurado para potência, energia ou monitoramento de estado`,loadingEntities:`Carregando entidades...`,loading:`Carregando...`,failedToLoadEntities:`Falha ao carregar entidades: {{error}}`,noEntitiesMatching:`Nenhuma entidade encontrada correspondente a "{{search}}"`,noEntitiesAvailable:`Nenhuma entidade disponível`,searchingEntities:`Buscando todas as entidades ({{count}} encontradas)`,showingEntities:`Mostrando switch, light, input_boolean ({{count}} disponíveis)`,energyMonitoringOptional:`Monitoramento de energia (Opcional)`,energyMonitoringHint:`Pesquise e selecione sensores que fornecem dados de potência/energia.`,powerSensorW:`Sensor de potência (W)`,energyTodayKwh:`Energia hoje (kWh)`,totalEnergyKwh:`Energia total (kWh)`,noMatchingSensors:`Nenhum sensor correspondente`,none:`Nenhum`,mqttNotConfigured:`Broker MQTT não configurado. Defina o endereço do broker em`,mqttSettingsPath:`Configurações → Rede → Publicação MQTT`,mqttNotConfiguredSuffix:`(você não precisa ativar a publicação, apenas preencha os detalhes do broker).`,mqttMonitorOnlyDescription:`Plugues MQTT recebem dados de potência/energia via assinatura MQTT. O controle liga/desliga não está disponível - use seu broker MQTT ou sistema de automação residencial.`,powerMonitoring:`Monitoramento de potência`,energyMonitoring:`Monitoramento de energia`,stateMonitoring:`Monitoramento de estado`,optional:`opcional`,topic:`Tópico`,jsonPath:`Caminho JSON`,multiplier:`Multiplicador`,onValue:`Valor ON`,mqttPowerHint:`O caminho JSON extrai o valor do payload JSON (ex: "power_l1"). Deixe vazio se o tópico publica valores numéricos brutos.
+ON 값: "ON"을 의미하는 정확한 문자열. 자동 감지(ON, true, 1)를 위해 비워두세요.`,restControl:`제어`,restOnUrl:`켜기 URL`,restOffUrl:`끄기 URL`,restOnBody:`ON 요청 본문`,restOffBody:`OFF 요청 본문`,restMethod:`HTTP 방법`,restHeaders:`사용자 지정 헤더 (JSON)`,restStatusUrl:`상태 URL`,restStatusPath:`상태 JSON 경로`,restStatusOnValue:`ON 값`,restPowerUrl:`전력 URL`,restPowerPath:`전력 JSON 경로`,restPowerMultiplier:`전력 배수`,restEnergyUrl:`에너지 URL`,restEnergyPath:`에너지 JSON 경로 (오늘)`,restEnergyTotalPath:`에너지 JSON 경로 (누적값)`,restEnergyTotalMultiplier:`누적값 배율`,restEnergyTotalPathHint:`예: aenergy.total`,restEnergyTotalHint:`많은 플러그가 — Shelly는 모두 — 초기화되지 않는 누적 카운터만 보고합니다. 그 값은 위 항목이 아니라 여기에 입력하세요. 오늘 사용량으로 읽으면 자정에 초기화되지 않고, 어제와 총계는 계속 비어 있게 됩니다. Bambuddy가 누적값에서 오늘과 어제를 계산하며, 이를 위해 하루에서 이틀 치 측정값이 필요합니다. Shelly는 와트시로 보고하므로 배율은 0.001을 사용하세요.`,restEnergyMultiplier:`에너지 배수`,restUrlRequired:`REST 플러그에는 URL(ON 또는 OFF) 중 하나 이상이 필요합니다`,restHeadersHint:`예: {"Authorization": "Bearer your-token"}`,restBodyHint:`예: ON, {"state": "on"}`,restStatusHint:`현재 상태를 폴링할 URL`,restPathHint:`예: state 또는 data.power.status`,restPowerUrlHint:`전력 데이터의 별도 URL (비어 있으면 상태 URL 사용)`,restEnergyUrlHint:`에너지 데이터의 별도 URL (비어 있으면 상태 URL 사용)`,restEnergyHint:`각 값은 자체 URL을 사용하거나 상태 URL로 대체할 수 있습니다. 단위 변환에 배수를 사용하세요 (예: Wh→kWh에 0.001).`,testConnection:`연결 테스트`,connectionSuccess:`연결 성공`,noSwitchesInSwitchbar:`스위치바에 스위치 없음`,enableSwitchbarHint:`설정 > 스마트 플러그에서 "스위치바에 표시"를 활성화하세요`,autoOffAfterDrying:`건조 후 자동 끄기`,autoOffAfterDryingDescription:`AMS 건조가 완료되면 끄기`,delayAfterDryingMinutes:`건조 후 지연 (분)`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`이메일`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`SMTP 이메일 알림`,telegram:`Telegram 봇을 통한 알림`,discord:`Webhook을 통해 Discord 채널로 전송`,ntfy:`무료, 자체 호스팅 가능한 푸시 알림`,pushover:`간단하고 신뢰할 수 있는 푸시 알림`,callmebot:`CallMeBot을 통한 무료 WhatsApp 알림`,webhook:`모든 URL에 일반 HTTP POST`,homeassistant:`Home Assistant 대시보드의 지속적인 알림`,bark:`Bark를 통한 iOS 푸시 알림(셀프 호스팅 가능)`},lastSuccess:`마지막: {{date}}`,error:`오류`,printer:`프린터:`,allPrinters:`모든 프린터`,sendTestNotification:`테스트 알림 전송`,eventSettings:`이벤트 설정`,enabled:`활성화됨`,sendFromProvider:`이 제공자에서 알림 전송`,printEvents:`인쇄 이벤트`,printerStatus:`프린터 상태`,amsAlarms:`AMS 알람`,amsHtAlarms:`AMS-HT 알람`,printQueue:`인쇄 대기열`,start:`시작`,plateCheck:`플레이트 확인`,complete:`완료`,failed:`실패`,stopped:`중지됨`,progress:`진행률`,offline:`오프라인`,lowFilament:`필라멘트 부족`,maintenance:`유지 관리`,amsHumidity:`AMS 습도`,amsTemp:`AMS 온도`,amsDryingSuspended:`건조 중단됨`,amsHtHumidity:`AMS-HT 습도`,amsHtTemp:`AMS-HT 온도`,bedCooled:`베드 냉각됨`,firstLayer:`첫 번째 레이어`,quiet:`방해 금지`,digest:`요약 {{time}}`,printStarted:`인쇄 시작됨`,plateNotEmpty:`플레이트 비어 있지 않음`,plateNotEmptyDescription:`인쇄 전 개체 감지됨`,plateClearRequired:`플레이트 비움 확인 필요`,plateClearRequiredDescription:`인쇄 완료, 대기열이 플레이트 확인을 기다림`,plateClear:`플레이트 확인`,printCompleted:`인쇄 완료됨`,bedCooledLabel:`베드 냉각됨`,bedCooledDescription:`인쇄 후 베드가 임계값 이하로 냉각됨`,firstLayerCompleteLabel:`첫 번째 레이어 완료`,firstLayerCompleteDescription:`첫 번째 레이어 완료 시 스냅샷과 함께 알림`,missingSpoolAssignmentLabel:`스풀 할당 누락`,billingChargeFailedLabel:`결제 처리 실패`,billingChargeFailedDescription:`인쇄 비용을 기록하지 못한 경우 알림`,missingSpoolAssignmentDescription:`인쇄 시작 시 필요한 트레이에 할당된 스풀이 없을 때 알림`,printFailed:`인쇄 실패`,printStopped:`인쇄 중지됨`,progressMilestones:`진행률 이정표`,progressMilestonesDescription:`25%, 50%, 75%에서 알림`,printerOffline:`프린터 오프라인`,printerError:`프린터 오류`,aiFailureDetection:`AI 실패 감지`,aiFailureDetectionDescription:`Obico AI가 인쇄 실패 가능성을 감지하면 알림`,lowFilamentLabel:`필라멘트 부족`,maintenanceDue:`유지 관리 필요`,maintenanceDueDescription:`유지 관리가 필요할 때 알림`,amsHumidityHigh:`AMS 습도 높음`,amsHumidityHighDescription:`일반 AMS 습도가 임계값 초과`,amsTemperatureHigh:`AMS 온도 높음`,amsTemperatureHighDescription:`일반 AMS 온도가 임계값 초과`,amsDryingSuspendedTitle:`자동 건조 중단`,amsDryingSuspendedDescription:`습도가 임계값 아래로 내려가지 않아 AMS 유닛의 자동 건조를 중단했습니다`,amsHtHumidityHigh:`AMS-HT 습도 높음`,amsHtHumidityHighDescription:`AMS-HT 습도가 임계값 초과`,amsHtTemperatureHigh:`AMS-HT 온도 높음`,amsHtTemperatureHighDescription:`AMS-HT 온도가 임계값 초과`,inventoryAlerts:`재고 알림`,stockReorderAlert:`재주문 알림`,stockReorderAlertDescription:`SKU가 재주문 시점에 도달함`,stockBreakAlert:`재고 소진 알림`,stockBreakAlertDescription:`보충 전에 재고가 소진될 것임`,jobAdded:`작업 추가됨`,jobAddedDescription:`대기열에 작업 추가됨`,jobAssigned:`작업 할당됨`,jobAssignedDescription:`모델 기반 작업이 프린터에 할당됨`,jobStarted:`작업 시작됨`,jobStartedDescription:`대기열 작업 인쇄 시작됨`,jobWaiting:`작업 대기 중`,jobWaitingDescription:`필라멘트 또는 프린터를 기다리는 작업`,jobSkipped:`작업 건너뜀`,jobSkippedDescription:`작업 건너뜀 (이전 실패)`,jobFailed:`작업 실패`,jobFailedDescription:`작업 시작 실패`,queueComplete:`대기열 완료`,queueCompleteDescription:`모든 대기열 작업 완료`,quietHours:`방해 금지 시간`,noNotificationsDuring:`이 시간 동안 알림 없음`,editProviderToChangeQuietHours:`방해 금지 시간을 변경하려면 제공자를 편집하세요`,dailyDigest:`일일 요약`,batchNotifications:`알림을 하나의 일일 요약으로 묶기`,sendAt:`{{time}}에 전송`,editProviderToChangeDigestTime:`요약 시간을 변경하려면 제공자를 편집하세요`,edit:`편집`,deleteProvider:`알림 제공자 삭제`,deleteConfirm:`"{{name}}"을(를) 삭제하시겠습니까? 이 작업은 취소할 수 없습니다.`,delete:`삭제`,addTitle:`알림 제공자 추가`,editTitle:`알림 제공자 편집`,nameLabel:`이름 *`,namePlaceholder:`내 알림`,providerTypeLabel:`제공자 유형 *`,configuration:`구성`,testConfiguration:`구성 테스트`,printerFilter:`프린터 필터`,onlyFromPrinter:`이 프린터의 이벤트에 대한 알림만 전송`,quietHoursDnd:`방해 금지 시간`,quietStart:`시작`,quietEnd:`종료`,dailyDigestLabel:`일일 요약`,sendDigestAt:`요약 전송 시각`,digestCollected:`이벤트가 수집되어 이 시간에 하나의 요약으로 전송됩니다`,notificationEvents:`알림 이벤트`,progressPercent:`(25%, 50%, 75%)`,bedCooledAfterPrint:`(인쇄 완료 후)`,haSensorAlert:`프린터 센서 경고`,haSensorAlertDescription:`(연결된 Home Assistant 센서에 주의가 필요합니다)`,locationHaSensorAlert:`보관 위치 센서 경고`,locationHaSensorAlertDescription:`(보관 위치에 연결된 Home Assistant 센서에 주의가 필요합니다)`,eventPriority:{sectionTitle:`ntfy 우선순위`,helpNtfy:`각 활성화된 이벤트에 대한 우선순위를 선택하세요. ntfy는 이를 사용하여 알림을 에스컬레이션합니다(소리, 가시성, 푸시 동작). 여기서 설정되지 않은 수준은 ntfy 서버 기본값을 사용합니다.`,min:`최소`,low:`낮음`,default:`기본값`,high:`높음`,urgent:`긴급`},cancel:`취소`,save:`저장`,add:`추가`,nameRequired:`이름이 필요합니다`,fieldRequired:`{{field}}이(가) 필요합니다`,haDataInvalid:`Data 필드는 유효한 JSON 객체여야 합니다(예: {"priority": "high", "ttl": 0})`,phoneNumber:`전화번호`,apiKey:`API 키`,serverUrl:`서버 URL`,topic:`토픽`,authToken:`인증 토큰`,userKey:`사용자 키`,appToken:`앱 토큰`,priority:`우선순위`,pushoverRetry:`긴급 재알림 (초)`,pushoverExpire:`긴급 만료 (초)`,botToken:`봇 토큰`,chatId:`채팅 ID`,telegramThreadId:`포럼 주제 ID`,telegramThreadIdHelp:`선택 사항. 포럼 그룹의 특정 주제로 전송합니다. 주제 링크의 마지막 숫자입니다 (t.me/c/.../25). 비워 두면 General 주제로 전송됩니다.`,telegramThreadIdInvalid:`포럼 주제 ID는 숫자여야 합니다.`,smtpServer:`SMTP 서버`,smtpPort:`SMTP 포트`,security:`보안`,authentication:`인증`,username:`사용자 이름`,password:`비밀번호`,fromEmail:`발신 이메일`,toEmail:`수신 이메일`,webhookUrl:`Webhook URL`,payloadFormat:`페이로드 형식`,authorization:`인증`,titleFieldName:`제목 필드 이름`,messageFieldName:`메시지 필드 이름`,editTemplate:`템플릿 편집: {{name}}`,titleLabel:`제목`,bodyLabel:`본문`,titlePlaceholder:`알림 제목...`,bodyPlaceholder:`알림 본문...`,availableVariables:`사용 가능한 변수`,clickToInsert:`클릭하여 본문의 커서 위치에 삽입`,livePreview:`실시간 미리보기`,hide:`숨기기`,show:`표시`,loadingPreview:`미리보기 불러오는 중...`,enterTemplateContent:`미리보기를 보려면 템플릿 내용을 입력하세요`,titlePreview:`제목:`,bodyPreview:`본문:`,resetToDefault:`기본값으로 초기화`,titleRequired:`제목이 필요합니다`,bodyRequired:`본문이 필요합니다`,notificationLog:`알림 로그`,showFailedOnly:`실패만`,last24Hours:`최근 24시간`,last7Days:`최근 7일`,last30Days:`최근 30일`,last90Days:`최근 90일`,justNow:`방금`,noFailedNotifications:`실패한 알림 없음`,noNotificationsLogged:`기록된 알림 없음`,unknownProvider:`알 수 없는 제공자`,logTitle:`제목`,logMessage:`메시지`,logError:`오류`,logProvider:`제공자: {{type}}`,logTime:`시간: {{time}}`,refresh:`새로고침`,clearOld:`오래된 것 삭제`,statsSummary:`최근 {{days}}일:`,statsNotifications:`알림`,statsSent:`{{count}}개 전송됨`,statsFailed:`{{count}}개 실패`,eventTypes:{print_start:`인쇄 시작됨`,print_complete:`인쇄 완료`,print_failed:`인쇄 실패`,print_stopped:`인쇄 중지됨`,print_progress:`진행률`,printer_offline:`프린터 오프라인`,printer_error:`프린터 오류`,filament_low:`필라멘트 부족`,maintenance_due:`유지 관리 필요`,test:`테스트`},userEmail:{title:`알림`,emailNotifications:`이메일 알림`,emailNotificationsDesc:`내 인쇄 작업에 대한 이메일 알림을 받습니다. 이메일은 고급 인증에서 구성된 시스템 SMTP 설정을 사용하여 전송됩니다.`,sendingTo:`알림이 전송될 주소`,noEmailWarning:`계정에 이메일 주소가 없습니다. 관리자에게 연락하여 추가하세요.`,printJobNotifications:`인쇄 작업 알림`,printJobNotificationsDesc:`내가 제출한 인쇄 작업에 대해 이메일 알림을 트리거할 이벤트를 선택하세요.`,printJobStarts:`인쇄 작업 시작`,printJobStartsDesc:`인쇄 작업이 시작될 때 알림 받기.`,printJobFinishes:`인쇄 작업 완료`,printJobFinishesDesc:`인쇄 작업이 성공적으로 완료될 때 알림 받기.`,printErrors:`인쇄 오류`,printErrorsDesc:`인쇄 작업이 실패하거나 오류가 발생할 때 알림 받기.`,printJobStops:`인쇄 작업 중지`,printJobStopsDesc:`인쇄 작업이 취소되거나 중지될 때 알림 받기.`,saveSuccess:`알림 환경 설정이 저장되었습니다.`,saveError:`알림 환경 설정 저장 실패.`}},richTextEditor:{bold:`굵게`,italic:`기울임`,underline:`밑줄`,bulletList:`글머리 기호 목록`,numberedList:`번호 목록`,alignLeft:`왼쪽 정렬`,alignCenter:`가운데 정렬`,alignRight:`오른쪽 정렬`,addLink:`링크 추가`,removeLink:`링크 제거`},externalLinks:{title:`사이드바 링크`,sidebarLayout:`사이드바`,sidebarLayoutDescription:`기본 제공 페이지를 표시하거나 숨기고, 외부 링크를 추가하고, 항목을 드래그하여 사이드바 탐색 순서를 변경하세요.`,systemPages:`Bambuddy 페이지`,externalLinks:`외부 링크`,visibleInSidebar:`사이드바에 표시`,hiddenFromSidebar:`사이드바에서 숨김`,requiredInSidebar:`사이드바에 필수`,hidePage:`페이지 숨기기`,showPage:`페이지 표시`,settingsCannotBeHidden:`설정은 숨길 수 없습니다`,noLinksConfigured:`구성된 외부 링크 없음`,deleteLink:`링크 삭제`,removeCustomIcon:`사용자 지정 아이콘 제거`,openInNewTab:`새 탭에서 열기`,placeholders:{linkName:`내 링크`}},keyboardShortcuts:{title:`키보드 단축키`,navigation:`탐색`,archivesSection:`아카이브`,kProfilesSection:`K-프로필`,generalSection:`일반`,shortcuts:{goToPrinters:`프린터로 이동`,goToArchives:`아카이브로 이동`,goToQueue:`대기열로 이동`,goToStats:`통계로 이동`,goToProfiles:`클라우드 프로필로 이동`,goToSettings:`설정으로 이동`,focusSearch:`검색 포커스`,openUploadModal:`업로드 모달 열기`,clearSelection:`선택 초기화 / 입력 포커스 해제`,contextMenu:`카드 컨텍스트 메뉴`,refreshProfiles:`프로필 새로고침`,newProfile:`새 프로필`,exitSelectionMode:`선택 모드 종료`,showHelp:`이 도움말 표시`},footer:`Esc를 누르거나 외부를 클릭하여 닫기`},notificationLog:{title:`알림 로그`,events:{printStarted:`인쇄 시작됨`,printComplete:`인쇄 완료`,printFailed:`인쇄 실패`,printStopped:`인쇄 중지됨`,progress:`진행률`,printerOffline:`프린터 오프라인`,printerError:`프린터 오류`,lowFilament:`필라멘트 부족`,maintenanceDue:`유지 관리 필요`,test:`테스트`},timeAgo:{justNow:`방금`,minutesAgo:`{{minutes}}분 전`,hoursAgo:`{{hours}}시간 전`}},restoreBackup:{title:`백업 복원`,restoring:`복원 중...`,restoreComplete:`복원 완료`,restoreFailed:`복원 실패`,importSettings:`백업 파일에서 설정 가져오기`,pleaseWait:`데이터가 복원되는 동안 기다려 주세요`,clickToSelect:`백업 파일 클릭하여 선택 (.json 또는 .zip)`,howDuplicateHandling:`중복 처리 방법:`,categories:{printers:`프린터`,smartPlugs:`스마트 플러그`,notificationProviders:`알림 제공자`,filaments:`필라멘트`,archives:`아카이브`,pendingUploads:`대기 중인 업로드`,settingsTemplates:`설정 및 템플릿`},matchingInfo:{printers:`일련번호로 일치`,smartPlugs:`IP 주소로 일치`,notificationProviders:`이름으로 일치`,filaments:`이름 + 유형 + 브랜드로 일치`,archives:`콘텐츠 해시로 일치`,pendingUploads:`파일 이름으로 일치`,settingsTemplates:`항상 덮어씀`},replaceExisting:`기존 데이터 교체`,keepExisting:`기존 데이터 유지`,replaceDescription:`백업 데이터로 이미 존재하는 항목 덮어쓰기`,keepDescription:`아직 존재하지 않는 항목만 복원`,caution:`주의:`,cautionText:`덮어쓰기는 현재 구성을 백업 데이터로 교체합니다. 보안상 프린터 액세스 코드는 절대 덮어쓰지 않습니다.`,itemsRestored:`복원된 항목`,itemsSkipped:`건너뛴 항목`,restored:`복원됨`,skipped:`건너뜀 (이미 존재)`,filesLabel:`파일 (3MF, 썸네일 등)`,newApiKeysGenerated:`새 API 키 생성됨`,newApiKeysWarning:`이 키는 한 번만 표시됩니다. 지금 복사하세요!`,processingBackup:`백업 파일 처리 중...`,noDataFound:`백업 파일에서 복원할 데이터를 찾을 수 없습니다.`,failedToRestore:`백업 복원 실패. 파일 형식을 확인하세요.`},backupExport:{title:`백업 내보내기`,selectData:`포함할 데이터 선택`,selectAll:`모두 선택`,selectNone:`선택 없음`,categoryDescriptions:{settings:`언어, 테마, 업데이트 환경 설정`,notifications:`ntfy, Pushover, Discord 등`,templates:`사용자 지정 메시지 템플릿`,smartPlugs:`Tasmota 플러그 구성`,externalLinks:`외부 서비스에 대한 사이드바 링크`,printers:`프린터 정보 (액세스 코드 제외)`,plateDetection:`빈 플레이트 기준 이미지`,filaments:`필라멘트 유형 및 비용`,maintenance:`사용자 지정 유지 관리 일정`,archives:`모든 인쇄 데이터 + 파일 (3MF, 썸네일, 사진)`,projects:`프로젝트, BOM 항목 및 첨부 파일`,pendingUploads:`검토 대기 중인 가상 프린터 업로드`,apiKeys:`Webhook API 키 (가져오기 시 새 키 생성)`},requiresPrinters:`프린터 선택 필요`,zipFileWarning:`ZIP 파일이 생성됩니다.`,zipFileDescription:`모든 3MF 파일, 썸네일, 타임랩스 및 사진을 포함합니다. 시간이 걸리고 파일이 커질 수 있습니다.`,includeAccessCodes:`액세스 코드 포함`,includeAccessCodesDescription:`다른 기기로 전송하는 경우`,includeAccessCodesWarning:`액세스 코드가 평문으로 포함됩니다. 이 백업 파일을 안전하게 보관하세요!`,categoriesSelected:`{{selectedCount}}개 카테고리 선택됨`},pendingUploads:{placeholders:{notes:`이 인쇄에 대한 메모 추가...`},discardUpload:`업로드 삭제`,archiveAllUploads:`모든 업로드 아카이브`,discardAllUploads:`모든 업로드 삭제`,archive:`아카이브`,timeAgo:{justNow:`방금`,minutesAgo:`{{minutes}}분 전`,hoursAgo:`{{hours}}시간 전`,daysAgo:`{{days}}일 전`}},apiBrowser:{placeholders:{requestBody:`JSON 요청 본문...`,searchEndpoints:`엔드포인트 검색...`}},configureAmsSlot:{title:`AMS 슬롯 구성`,slotConfigured:`슬롯 구성됨!`,configuringSlot:`슬롯 구성 중:`,slotLabel:`{{ams}} 슬롯 {{slot}}`,searchPresets:`프리셋 검색...`,colorPlaceholder:`색상 이름 또는 16진수 (예: brown, FF8800)`,clearCustomColor:`사용자 지정 색상 초기화`,noCloudPresets:`클라우드 프리셋 없음. Bambu 클라우드에 로그인하여 동기화하세요.`,noPresetsAvailable:`사용 가능한 프리셋 없음. Bambu 클라우드에 로그인하거나 로컬 프로필을 가져오세요.`,noMatchingPresets:`일치하는 프리셋을 찾을 수 없습니다.`,custom:`사용자 지정`,builtin:`기본 제공`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`설정이 프린터로 전송됨`,filamentProfile:`필라멘트 프로필`,kProfileLabel:`K 프로필 (압력 전진)`,filteringFor:`필터링 중: {{material}}`,noKProfile:`K 프로필 없음 (기본값 0.020 사용)`,noMatchingKProfiles:`일치하는 K 프로필을 찾을 수 없습니다. 기본값 K=0.020이 사용됩니다.`,otherKProfiles:`이 프린터의 다른 K 프로필`,selectFilamentFirst:`먼저 필라멘트 프로필을 선택하세요`,kFromCalibration:`K={{value}} (프린터 보정에서)`,customColorLabel:`사용자 지정 색상 (선택사항)`,presetColors:`{{name}} 색상:`,showLessColors:`색상 간략히 보기`,showMoreColors:`더 많은 색상 보기`,clear:`초기화`,hexLabel:`16진수: #{{hex}}`,resetting:`초기화 중...`,resetSlot:`슬롯 초기화`,cancel:`취소`,configuring:`구성 중...`,configureSlot:`슬롯 구성`},githubBackup:{title:`Git 백업`,history:`기록`,downloadBackup:`백업 다운로드`,restoreBackup:`백업 복원`,noBackupsYet:`아직 백업 없음`},emailSettings:{placeholders:{fromName:`Bambuddy`}},tagManagement:{searchTags:`태그 검색...`,renameTag:`태그 이름 바꾸기`,deleteTag:`태그 삭제`},notificationTemplates:{placeholders:{title:`알림 제목...`,body:`알림 본문...`}},batchTag:{placeholders:{newTag:`새 태그 입력...`}},photoGallery:{deletePhoto:`사진 삭제`},filamentHoverCard:{copySpoolUuid:`스풀 UUID 복사`},kProfilesView:{hasNote:`메모 있음`,copyProfile:`프로필 복사`},layout:{openMenu:`메뉴 열기`,noPermissionSystemInfo:`시스템 정보를 볼 권한이 없습니다`},dashboard:{dragToReorder:`드래그하여 순서 변경`,hideWidget:`위젯 숨기기`},notificationProviderCard:{deleteNotificationProvider:`알림 제공자 삭제`},fileManagerModal:{closeFileManager:`파일 관리자 닫기`,sortFiles:`파일 정렬`,goToParentFolder:`상위 폴더로 이동`,threeView:`3D 보기`},embeddedCameraViewer:{refreshStream:`스트림 새로고침`,close:`닫기`,zoomOut:`축소`,resetZoom:`배율 초기화`,zoomIn:`확대`,dragToResize:`드래그하여 크기 조정`},timelapseViewer:{skipBack5s:`5초 뒤로`,skipForward5s:`5초 앞으로`},notificationProviders:{descriptions:{email:`SMTP 이메일 알림`,telegram:`Telegram 봇을 통한 알림`,discord:`Webhook을 통해 Discord 채널로 전송`,ntfy:`무료, 자체 호스팅 가능한 푸시 알림`,pushover:`간단하고 신뢰할 수 있는 푸시 알림`,callmebot:`CallMeBot을 통한 무료 WhatsApp 알림`,webhook:`모든 URL에 일반 HTTP POST`}},logViewer:{searchPlaceholder:`메시지 또는 로거 이름 검색...`,noLogEntries:`로그 항목을 찾을 수 없음`},switchbarPopover:{noSwitchesInSwitchbar:`스위치바에 스위치 없음`},projectPageModal:{placeholders:{title:`제목`,designer:`디자이너`,license:`라이선스`,description:`설명 입력...`,profileTitle:`프로필 제목`,profileDescription:`프로필 설명...`}},SpoolmanSettings:{},time:{unknown:`-`,waiting:`대기 중`,justNow:`방금`,now:`지금`,minsAgo:`{{count}}분 전`,inMins:`{{count}}분 후`,hoursAgo:`{{count}}시간 전`,inHours:`{{count}}시간 후`,daysAgo:`{{count}}일 전`,inDays:`{{count}}일 후`},spoolbuddy:{nav:{dashboard:`대시보드`,ams:`AMS`,inventory:`재고`,writeTag:`태그 쓰기`,settings:`설정`},status:{nfcReady:`NFC 준비됨`,nfcOff:`NFC 꺼짐`,offline:`오프라인`,online:`온라인`,noPrinters:`프린터 없음`,deviceOffline:`장치 오프라인`,waitingConnection:`장치 연결 대기 중...`,systemReady:`시스템 준비됨`,status:`상태`},dashboard:{readyToScan:`스캔 준비됨`,idleMessage:`스풀을 저울에 올려 식별하세요`,nfcHint:`NFC 태그가 자동으로 읽힙니다`,device:`장치`,syncWeight:`무게 동기화`,weightSynced:`동기화됨!`,unknownTag:`알 수 없는 태그`,newTag:`새 태그 감지됨`,onScale:`저울 위`,linkSpool:`스풀에 연결`,linkTagTitle:`태그를 스풀에 연결`,linkTag:`태그 연결`,selectSpool:`이 태그를 연결할 스풀 선택:`,noUntagged:`태그 없는 스풀을 찾을 수 없음`,tagDetected:`태그 감지됨`,noTag:`태그 없음`,tagId:`태그`,grossWeight:`총 무게`,spoolSize:`스풀 크기`,close:`닫기`,currentSpool:`현재 스풀`,plateReady:`플레이트 준비됨: {{name}}`,plateReadyLabel:`초기화할 플레이트`,plateClearAction:`초기화`,plateClearedToast:`플레이트가 초기화됨으로 표시됨`,plateClearFailed:`플레이트를 초기화됨으로 표시할 수 없음`},modal:{spoolDetected:`스풀 감지됨`,assignToAms:`AMS에 할당`,syncWeight:`무게 동기화`,weightSynced:`동기화됨!`,syncing:`동기화 중...`,newTagDetected:`새 태그 감지됨`,addToInventory:`재고에 추가`,assignToAmsTitle:`AMS에 할당`,selectSlot:`슬롯 선택`,assign:`할당`,assigning:`할당 중...`,assignSuccess:`할당됨!`,assignPendingInsert:`할당됨. 스풀을 삽입하면 슬롯이 구성됩니다.`,assignError:`스풀 할당 실패. 다시 시도하세요.`,noPrinterSelected:`프린터 선택...`,noAmsDetected:`이 프린터에서 AMS가 감지되지 않음`,slot:`슬롯`},weight:{noReading:`읽기 없음`,stable:`안정됨`,measuring:`측정 중...`,tare:`영점 조정`,calibrate:`보정`},spool:{remaining:`남은 양`,material:`재료`,brand:`브랜드`,color:`색상`,coreWeight:`코어`,labelWeight:`라벨`,scaleWeight:`저울`,netWeight:`순 무게`,lastUsed:`마지막 사용`,unknownColor:`알 수 없는 색상`},ams:{noData:`AMS가 감지되지 않음`,connectAms:`필라멘트 슬롯을 보려면 AMS를 연결하세요`,noPrinter:`선택된 프린터 없음`,selectPrinter:`상단 표시줄에서 프린터를 선택하세요`,printerDisconnected:`프린터 연결 끊김`,humidity:`습도`,level:`레벨`,active:`활성`,slot:`슬롯`,empty:`비어 있음`},inventory:{search:`스풀 검색...`,empty:`재고에 스풀 없음`,noResults:`일치하는 스풀 없음`,spools:`스풀`,addSpool:`스풀 추가`},settings:{tabDevice:`장치`,tabDisplay:`화면`,tabScale:`저울`,tabUpdates:`업데이트`,nfcReader:`NFC 리더`,type:`유형`,connection:`연결`,notConnected:`N/A`,deviceInfo:`장치 정보`,hostname:`호스트`,uptime:`가동 시간`,systemConfig:`백엔드 및 인증`,backendUrl:`Bambuddy 백엔드 URL`,apiToken:`API 토큰`,apiTokenPlaceholder:`API 토큰 입력`,saveConfig:`구성 저장`,systemQueued:`구성 대기 중.`,nfcDiagnostic:`NFC 진단`,scaleDiagnostic:`저울 진단`,readTagDiagnostic:`태그 읽기 진단`,testNfc:`리더 테스트`,testScale:`정확도 테스트`,testReadTag:`태그 읽기`,systemFieldsRequired:`백엔드 URL이 필요합니다.`,brightness:`밝기`,saved:`저장됨`,noBacklight:`DSI 백라이트가 감지되지 않음. 밝기 제어는 DSI 디스플레이가 필요합니다.`,screenBlank:`화면 꺼짐 대기 시간`,screenBlankDesc:`비활성 후 화면이 꺼집니다. 터치하여 깨우세요.`,displayNote:`밝기는 소프트웨어 필터로 적용됩니다.`,scaleCalibration:`저울 보정`,currentWeight:`현재 무게`,tareOffset:`영점`,calFactor:`계수`,knownWeight:`알려진 무게`,calStep1:`저울에서 모든 물건을 제거하고 영점 설정을 누르세요.`,calStep2:`저울에 알려진 무게를 올리세요.`,setZero:`영점 설정`,calibrateNow:`보정`,calibrated:`보정됨`,tareSet:`영점 조정 명령 전송됨. 장치 대기 중...`,tareComplete:`영점 조정 완료!`,tareTimedOut:`영점 조정 시간 초과 — SpoolBuddy 데몬이 실행 중인가요?`,tareFailed:`영점 조정 명령 전송 실패`,zeroSet:`영점이 설정됨. 저울에 알려진 무게를 올리세요.`,calibrationDone:`보정 완료!`,calibrationFailed:`보정 실패`,lastCalibrated:`마지막 보정`,stable:`안정됨`,settling:`안정화 중...`,firmware:`펌웨어`,scale:`저울`,noDevice:`SpoolBuddy 장치를 찾을 수 없음`,daemonVersion:`데몬 버전`,currentVersion:`현재`,versionPending:`데몬 대기 중...`,checking:`확인 중...`,checkUpdates:`업데이트 확인`,updateAvailable:`업데이트 사용 가능`,updateInstructions:`SSH를 통해 업데이트: SpoolBuddy 설치 스크립트를 실행하여 업그레이드하세요.`,upToDate:`최신 버전`,includeBeta:`베타 버전 포함`},writeTag:{tabExisting:`기존 스풀`,tabNew:`새 스풀`,tabReplace:`태그 교체`,searchPlaceholder:`재료, 색상, 브랜드로 검색...`,noUntaggedSpools:`태그 없는 스풀 없음`,noTaggedSpools:`태그 있는 스풀 없음`,selectSpool:`스풀을 선택한 후 빈 NTAG를 리더에 올려놓으세요`,placeTag:`NTAG를 리더에 올려놓으세요`,tagReady:`태그 감지됨 — 쓰기 준비됨`,writeTag:`태그 쓰기`,replaceTag:`태그 교체`,writing:`태그 쓰는 중...`,waiting:`SpoolBuddy 대기 중...`,writeSuccess:`태그 성공적으로 쓰여짐!`,writeFailed:`쓰기 실패`,queueFailed:`쓰기 명령 대기 실패`,tryAgain:`다시 시도`,cancel:`취소`,replaceWarning:`이전 태그가 연결 해제됩니다. 새 태그가 교체합니다.`,deviceOffline:`SpoolBuddy가 오프라인입니다`,material:`재료`,colorName:`색상 이름`,color:`색상`,brand:`브랜드`,weight:`무게 (g)`,createSpool:`스풀 생성`,creating:`생성 중...`,spoolCreated:`스풀 생성됨! 쓰기 준비됨.`,createFailed:`스풀 생성 실패`,incompleteDataWarning:`불완전한 Spoolman 데이터로 태그 쓰여짐`},quickMenu:{printerPower:`프린터 전원`,systemControls:`시스템`,restartDaemon:`데몬 재시작`,restartBrowser:`브라우저 재시작`,reboot:`재부팅`,shutdown:`종료`,swipeToClose:`아래로 스와이프하여 닫기`,confirmTitle:`확인`,confirmShutdown:`SpoolBuddy를 종료하시겠습니까? 다시 켜려면 물리적 접근이 필요합니다.`,confirmReboot:`SpoolBuddy를 재부팅하시겠습니까?`,confirmRestartDaemon:`SpoolBuddy 데몬을 재시작하시겠습니까? NFC와 저울이 일시적으로 사용 불가능합니다.`,confirmRestartBrowser:`키오스크 브라우저를 재시작하시겠습니까? 화면이 잠시 꺼집니다.`,confirm:`확인`,confirmPlugOn:`{{name}}을(를) 켜시겠습니까?`,confirmPlugOff:`{{name}}을(를) 끄시겠습니까?`,turnOn:`켜기`,turnOff:`끄기`}},bugReport:{title:`버그 신고`,description:`설명`,descriptionPlaceholder:`무엇이 잘못되었나요? 문제를 설명해 주세요...`,email:`이메일 (선택사항)`,emailPlaceholder:`your@email.com`,emailPrivacy:`제공하면 이메일이 GitHub 이슈의 접힌 섹션에 포함되어 관리자가 후속 조치를 취할 수 있습니다.`,screenshot:`스크린샷`,uploadOrPaste:`이미지 업로드, 붙여넣기 또는 드래그`,dataCollectedSummary:`보고서에 포함되는 데이터는?`,dataIncluded:`포함됨:`,dataIncludedList:`앱 버전, OS, 아키텍처, Python 버전, 데이터베이스 통계(개수만), 프린터 모델, 노즐 개수, 펌웨어 버전, 연결 상태, 통합 상태(Spoolman, MQTT, HA), 비민감 설정, 네트워크 인터페이스 수, Docker 세부 정보, 의존성 버전.`,dataNeverIncluded:`절대 포함되지 않음:`,dataNeverIncludedList:`프린터 이름, 일련 번호, 액세스 코드, 비밀번호, IP 주소, 이메일 주소, API 키, 토큰, Webhook URL, 호스트 이름 또는 사용자 이름.`,submit:`제출`,startLogging:`디버그 로깅 시작`,stepEnableLogging:`디버그 로깅 활성화됨`,stepReproduce:`이제 문제를 재현하세요`,stepStopLogging:`중지 후 보고서 제출`,stopAndSubmit:`중지 후 제출`,maxDuration:`{{minutes}}분 후 자동 중지`,stoppingLogs:`로그 수집 및 제출 중...`,submitting:`버그 보고서 제출 중...`,submitSuccess:`버그 보고서가 성공적으로 제출되었습니다!`,submitFailed:`버그 보고서 제출 실패`,thankYou:`감사합니다!`,submitted:`버그 보고서가 제출되었습니다.`,viewIssue:`이슈 보기`,closeKeepsRecording:`문제를 재현하는 동안 이 패널을 닫아도 됩니다. 기록은 계속되며 다시 열면 이 단계로 돌아옵니다.`,resumeRecording:`버그 리포트 기록 중 — {{elapsed}}. 클릭하여 완료하세요.`,resumeReport:`리포트 계속하기`,unexpectedError:`예상치 못한 오류가 발생했습니다`,submittingStepConnection:`프린터 연결 확인 실행 중`,submittingStepVirtualPrinters:`가상 프린터 설정 확인 실행 중`,submittingStepLogScan:`알려진 문제가 있는지 최근 로그 스캔 중`,submittingStepSubmit:`GitHub에 보고서 제출 중`,diagnosticChecking:`프린터 연결 확인 중...`,diagnosticHealthy:`연결 확인 통과 — 프린터에서 문제가 발견되지 않았습니다.`,diagnosticSummary:`{{total}}개 프린터 중 {{problems}}개에서 연결 문제가 있습니다`,diagnosticIntro:`하나 이상의 프린터에 연결 문제가 있어 현재 문제의 원인일 수 있습니다. 아래에서 프린터를 펼쳐 수정 방법을 확인하세요 — 해결하면 버그 보고서 없이 문제가 해결될 수 있습니다. 아래에서 보고서를 제출할 수도 있습니다.`,logHealthSummary:`로그에서 알려진 문제가 발견되었습니다`,logHealthIntro:`최근 로그가 알려진 문제와 일치합니다. 아래 수정 방법을 확인하세요 — 해결하면 버그 보고서 없이 문제가 해결될 수 있습니다. 아래에서 보고서를 제출할 수도 있습니다.`},failureDetection:{title:`AI 실패 감지`,description:`자체 호스팅 Obico ML API로 인쇄를 모니터링하고 감지된 실패에 자동으로 조치합니다.`,mlUrl:`Obico ML API URL`,mlUrlHint:`자체 호스팅 Obico ml_api 컨테이너의 기본 URL (예: http://192.168.1.10:3333).`,mlToken:`ML API 토큰 (선택 사항)`,mlTokenPlaceholder:`서버가 ML_API_TOKEN 없이 실행 중이면 비워 두세요`,mlTokenHint:`Obico ml_api 컨테이너의 ML_API_TOKEN 환경 변수와 일치해야 합니다. 컨테이너가 토큰 없이 실행 중이면 비워 두세요.`,test:`테스트`,testSuccess:`ML API에 도달 가능하며 정상입니다.`,testSuccessTokenUnknown:`ML API에 도달 가능하며 정상입니다. 토큰은 확인할 수 없었습니다.`,testFailed:`ML API에 도달할 수 없습니다.`,sensitivity:`민감도`,sensitivityLow:`낮음 (오탐 적음)`,sensitivityMedium:`중간 (균형)`,sensitivityHigh:`높음 (조기 감지, 오탐 많음)`,sensitivityHint:`경고 및 실패를 트리거하는 신뢰도 임계값을 조정합니다.`,action:`감지된 실패에 대한 조치`,actionNotify:`알림만`,actionPause:`인쇄 일시 중지`,actionPauseOff:`일시 중지 후 전원 끄기`,pollInterval:`폴링 간격 (초)`,pollIntervalHint:`인쇄 중 각 프린터를 확인하는 빈도. 최소 5초, 최대 120초.`,externalUrlMissing:`외부 URL이 설정되지 않았습니다.`,externalUrlHint:`ML API가 URL을 통해 카메라 스냅샷을 가져옵니다. ML API 컨테이너가 Bambuddy에 도달할 수 있도록 일반 설정에서 외부 URL을 설정하세요.`,perPrinterTitle:`모니터링되는 프린터`,perPrinterHint:`감지 서비스가 감시할 프린터를 선택하세요.`,monitorAll:`연결된 모든 프린터 모니터링`,statusTitle:`상태`,serviceRunning:`서비스 실행 중`,thresholds:`낮음 / 높음 임계값`,activePrinters:`활성 인쇄물`,noActivePrints:`현재 실행 중인 인쇄물 없음.`,historyTitle:`최근 감지`,noHistory:`아직 감지 없음.`},makerworld:{title:`MakerWorld`,description:`MakerWorld 모델 URL을 붙여넣어 Bambu Handy 앱을 떠나지 않고 Bambuddy에서 직접 가져오고 인쇄하세요.`,pasteUrlHeader:`MakerWorld에서 가져오기`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… 또는 MakerWorld 링크 붙여넣기`,resolveButton:`확인`,signInRequiredTitle:`다운로드하려면 Bambu 클라우드 로그인 필요`,signInRequiredBody:`익명으로 모델 세부 정보를 탐색할 수 있지만 MakerWorld는 3MF 파일을 다운로드하려면 Bambu 클라우드 계정이 필요합니다.`,signInExpiredTitle:`Bambu 클라우드 로그인이 만료되었습니다`,signInExpiredBody:`Bambuddy에는 여전히 로그인되어 있지만 Bambu Lab이 저장된 토큰을 더 이상 허용하지 않아 다운로드가 실패합니다. Bambu 클라우드에 다시 로그인하세요.`,openCloudSettings:`클라우드 설정 열기`,untitledModel:`제목 없는 모델`,byCreator:`{{name}} 제작`,downloadsCount:`{{count}}회 다운로드`,licensePrefix:`라이선스`,alreadyImported:`이미 라이브러리에 있음`,openOnMakerworld:`MakerWorld에서 열기`,alreadyInLibrary:`이 모델이 이미 라이브러리에 있습니다 — 파일 관리자 → MakerWorld에서 찾으세요`,importSuccess:`{{filename}} 가져옴 — 파일 관리자 → MakerWorld에 저장됨`,platesHeader:`플레이트 ({{count}})`,plateDefaultName:`플레이트 {{n}}`,materialCount:`{{count}}개 필라멘트`,amsRequired:`AMS 필요`,slicedFor:`{{printer}}용으로 슬라이싱됨`,alsoCompatible:`호환 가능으로도 표시됨: {{printers}}`,importToLibrary:`저장`,sliceIn:`{{slicer}}에서 저장 및 슬라이싱`,disclaimer:`MakerWorld 통합은 커뮤니티가 문서화한 API 엔드포인트를 사용합니다. Bambuddy는 MakerWorld 또는 Bambu Lab과 제휴하거나 이들의 승인을 받지 않았습니다.`,lastImportSuccess:`라이브러리에 가져옴`,lastImportAlreadyInLibrary:`이미 라이브러리에 있음`,viewInLibrary:`파일 관리자에서 보기`,openInBambuStudio:`Bambu Studio에서 열기`,openInOrcaSlicer:`OrcaSlicer에서 열기`,importTo:`파일 관리자로 가져오기`,recentImportsHeader:`최근 가져오기`,phaseResolving:`확인 중`,phaseDownloading:`다운로드 중`,folderAuto:`MakerWorld (기본값)`,importAll:`모두 가져오기`,importAllProgress:`{{total}}개 중 {{current}}개 가져오는 중`,openGallery:`이미지 갤러리 열기`,galleryPrev:`이전 이미지`,galleryNext:`다음 이미지`,deleteImport:`라이브러리에서 제거`,importDeleting:`제거 중…`,importDeleted:`라이브러리에서 제거됨`,confirmDelete:`라이브러리에서 {{filename}}을(를) 제거하시겠습니까? 로컬 파일이 삭제되지만 MakerWorld에서 다시 가져올 수 있습니다.`,errors:{resolveFailed:`MakerWorld URL을 확인할 수 없습니다.`,downloadFailed:`다운로드 실패. 다시 시도하세요.`,deleteFailed:`라이브러리에서 파일을 제거할 수 없습니다.`}},gcodeViewer:{filamentSlot:`필라멘트 {{n}}`,loading:`툴패스를 읽는 중…`,loadFailed:`이 파일의 G코드를 불러올 수 없습니다.`,showTravel:`이동 경로`,topLayer:`최상단 레이어`,bottomLayer:`최하단 레이어`,noSource:`미리 볼 파일이 지정되지 않았습니다.`,view:{filament:`필라멘트`,feature:`유형`,height:`높이`,width:`너비`},feature:{wall:`벽`,sparseInfill:`성긴 채움`,solidInfill:`솔리드 채움`,bridge:`브리지 / 오버행`,support:`서포트`,skirt:`스커트 / 브림`,gapFill:`틈 채움`,ironing:`다림질`,primeTower:`프라임 타워`},back:`뒤로`,backToArchives:`인쇄 아카이브로 돌아가기`,backToFiles:`파일 관리자로 돌아가기`,plates:`플레이트`,plateN:`플레이트 {{n}}`},libraryTrash:{title:`휴지통`,headerButton:`휴지통`,headerTooltip:`휴지통으로 이동된 파일 보기`,backToFiles:`파일 관리자로 돌아가기`,subtitleAdmin:`삭제된 파일은 {{days}}일 동안 여기에 보관된 후 자동 삭제됩니다. 이 보기는 모든 사용자의 휴지통 파일을 표시합니다.`,subtitleUser:`삭제된 파일은 {{days}}일 동안 여기에 보관된 후 자동 삭제됩니다.`,loading:`휴지통 불러오는 중…`,loadError:`휴지통을 불러올 수 없습니다.`,empty:`휴지통이 비어 있습니다.`,summary:`{{count}}개 파일 · {{size}}`,emptyTrash:`휴지통 비우기`,restore:`복원`,purgeNow:`지금 삭제`,autoPurgeIn:`{{when}} 후 자동 삭제`,days:`일`,retentionLabel:`자동 삭제 기간`,selectAll:`모두 선택`,selectOne:`{{filename}} 선택`,selectionCount:`{{count}}개 선택됨`,bulkRestore:`선택 항목 복원`,bulkPurge:`선택 항목 삭제`,col:{filename:`파일`,folder:`폴더`,size:`크기`,deleted:`휴지통 이동일`,autoPurge:`자동 삭제일`,owner:`소유자`,actions:`작업`},confirm:{purgeTitle:`영구 삭제?`,purgeBody:`{{filename}}이(가) 디스크에서 삭제되며 복원할 수 없습니다.`,emptyTitle:`휴지통을 비우시겠습니까?`,emptyBody:`{{count}}개의 모든 파일이 디스크에서 삭제됩니다. 이 작업은 취소할 수 없습니다.`,bulkPurgeTitle:`선택한 파일을 영구 삭제하시겠습니까?`,bulkPurgeBody:`선택한 {{count}}개 파일이 디스크에서 삭제되며 복원할 수 없습니다.`,cta:`영구 삭제`},toast:{restored:`파일이 복원되었습니다.`,restoreFailed:`파일을 복원할 수 없습니다.`,purged:`파일이 영구 삭제되었습니다.`,purgeFailed:`파일을 삭제할 수 없습니다.`,emptied:`휴지통에서 {{count}}개 파일이 삭제되었습니다.`,emptyFailed:`휴지통을 비울 수 없습니다.`,retentionSaved:`자동 삭제가 {{days}}일로 설정되었습니다.`,retentionFailed:`보존 설정을 저장할 수 없습니다.`,bulkRestored:`{{count}}개 파일이 복원되었습니다.`,bulkPurged:`{{count}}개 파일이 삭제되었습니다.`}},libraryPurge:{title:`오래된 파일 삭제`,headerButton:`오래된 파일 삭제`,headerTooltip:`오래된 파일을 휴지통으로 일괄 이동`,description:`라이브러리에서 오래된 파일을 한 번에 정리합니다. 인쇄 기록이 있는 파일은 마지막 인쇄 날짜 기준으로, 한 번도 인쇄되지 않은 파일은 업로드 날짜 기준으로 계산됩니다.`,ageLabel:`다음보다 오래된 파일 이동`,days:`일`,includeNeverPrinted:`한 번도 인쇄되지 않은 파일 포함`,effectsTitle:`삭제 클릭 시 일어나는 일`,effect1:`일치하는 파일이 휴지통으로 이동됩니다 — 디스크에서 아직 삭제되지 않습니다.`,effect2:`보존 기간이 만료되기 전까지 언제든 휴지통에서 복원할 수 있습니다.`,effect3:`보존 기간 후 휴지통 청소기가 디스크에서 영구적으로 제거합니다.`,effect4:`외부(연결된) 폴더의 파일은 건너뜁니다 — Bambuddy는 자신이 소유하지 않은 바이트는 절대 삭제하지 않습니다.`,previewLoading:`일치하는 파일 수 확인 중…`,previewFailed:`삭제 미리보기를 불러올 수 없습니다.`,previewSummary:`{{count}}개 파일 · {{size}}이(가) 휴지통으로 이동됩니다`,andMore:`…및 {{count}}개 더`,warning:`휴지통 파일은 보존 기간이 만료될 때까지 저장 공간을 차지합니다. 즉시 디스크를 확보하려면 나중에 휴지통을 비우세요.`,confirmCta:`{{count}}개를 휴지통으로 이동`,purging:`휴지통으로 이동 중…`,toast:{success:`{{count}}개 파일을 휴지통으로 이동했습니다.`,failed:`파일을 삭제할 수 없습니다.`}},libraryAutoPurge:{enableLabel:`오래된 파일 자동 삭제`,enableDescription:`매일 한 번 관리자 삭제를 실행합니다. 파일이 먼저 휴지통으로 이동됩니다 — 즉시 삭제되지 않습니다.`,ageLabel:`다음보다 오래된 파일 자동 삭제`,ageDescription:`최소 7일, 최대 10년. 수동 삭제 버튼과 같은 날짜 규칙을 사용합니다.`,days:`일`,includeNeverPrinted:`한 번도 인쇄되지 않은 파일 포함`,saveFailed:`자동 삭제 설정을 저장할 수 없습니다.`},archivePurge:{headerButton:`오래된 것 삭제`,headerTooltip:`오래된 아카이브 일괄 삭제`,title:`오래된 아카이브 삭제`,description:`오래된 인쇄 기록을 정리합니다. 각 아카이브는 가장 최근 인쇄 완료 시점 기준으로 계산됩니다 — 아카이브를 다시 인쇄하면 날짜가 새로고침되므로 활성 작업은 절대 삭제되지 않습니다.`,ageLabel:`다음 기간 동안 인쇄되지 않은 아카이브 삭제`,days:`일`,effectsTitle:`삭제 클릭 시 일어나는 일`,effect1:`일치하는 각 아카이브가 데이터베이스에서 영구적으로 제거됩니다.`,effect2:`3MF, 썸네일, 타임랩스, 소스 3MF, F3D 디자인 파일 및 사진 폴더가 모두 디스크에서 삭제됩니다.`,effect3:`아카이브에 대한 휴지통이 없습니다 — 삭제는 즉각적이며 취소할 수 없습니다.`,effect4:`아카이브를 다시 인쇄하면 날짜 카운터가 초기화되므로 여전히 사용하는 아카이브는 안전합니다.`,previewLoading:`일치하는 아카이브 수 확인 중…`,previewFailed:`삭제 미리보기를 불러올 수 없습니다.`,previewSummary:`{{count}}개 아카이브 · {{size}}이(가) 삭제됩니다`,andMore:`…및 {{count}}개 더`,warning:`영구적입니다. 계속하기 전에 보관하고 싶은 것을 다운로드하거나 즐겨찾기에 추가하세요.`,confirmCta:`{{count}}개 아카이브 삭제`,purging:`삭제 중…`,toast:{success:`{{count}}개 아카이브가 삭제되었습니다.`,failed:`아카이브를 삭제할 수 없습니다.`},purgeStatsLabel:`통계에서도 제거`,purgeStatsHint:`일치하는 아카이브를 빠른 통계(필라멘트, 시간, 비용, 에너지)에서 삭제합니다. 이 옵션 없이는 빠른 통계는 모든 기여를 유지하고 파일만 디스크에서 제거됩니다.`},archiveAutoPurge:{enableLabel:`오래된 아카이브 자동 삭제`,enableDescription:`매일 한 번, 임계값 내에 인쇄되지 않은 아카이브를 영구적으로 삭제합니다. 아카이브를 다시 인쇄하면 카운터가 초기화됩니다. 휴지통 없음 — 삭제는 즉각적입니다.`,ageLabel:`다음 기간 동안 인쇄되지 않은 아카이브 자동 삭제`,ageDescription:`최소 7일, 최대 10년. 가장 최근 인쇄 완료 시점 기준 — 아카이브를 다시 인쇄하면 날짜가 새로고침됩니다. 아카이브, 3MF, 썸네일, 타임랩스 및 사진을 삭제합니다.`,days:`일`,runNow:`지금 아카이브 삭제`,saveFailed:`자동 삭제 설정을 저장할 수 없습니다.`,purgeStatsLabel:`통계에서도 제거`,purgeStatsDescription:`활성화되면 일일 정리 작업도 각 삭제된 아카이브를 빠른 통계(필라멘트, 시간, 비용, 에너지)에서 제거합니다. 기본값 비활성화 — 빠른 통계는 기여를 유지하고 파일만 디스크에서 제거됩니다.`},cameraTokens:{scope:{camera_stream:`카메라 스트림`,camwall:`카메라 월`,overlay:`스트리밍 오버레이`},title:`카메라 API 토큰`,navTitle:`카메라 API 토큰`,description:`Home Assistant, Frigate, 키오스크 화면 등 안정적인 주소가 필요한 도구에 카메라 스트림을 삽입하기 위한 장기 토큰입니다. 범위는 생성할 때 선택하며, 토큰은 언제든지 취소할 수 있습니다.`,loading:`불러오는 중…`,confirmRevoke:{title:`이 토큰을 취소하시겠습니까?`,body:`"{{name}}"을(를) 사용하는 모든 장치가 즉시 접근을 잃습니다. 이 작업은 취소할 수 없습니다.`,cancel:`취소`,confirm:`취소`},create:{scopeLabel:`범위`,hintCameraStream:`카메라 스트림 토큰은 카메라 스트림과 스냅숏만 가져올 수 있습니다. Home Assistant, Frigate 등 카메라 하나를 삽입하는 용도로 사용하세요.`,hintCamWall:`카메라 월 토큰은 로그인 없이 화면에서 /camwall을 엽니다. 모든 프린터의 이름과 상태, 카메라 스트림을 볼 수 있습니다. 파일 이름, 주소, 액세스 코드는 볼 수 없습니다.`,hintOverlay:`스트리밍 오버레이 토큰은 로그인 없이 화면에서 /overlay/{printerId}을 엽니다 — OBS나 모든 라이브 방송용입니다. 프린터 한 대의 카메라 스트림과 화면에 표시되는 파일 이름을 포함한 실시간 인쇄 상태를 볼 수 있습니다. 주소나 액세스 코드는 볼 수 없습니다.`,title:`새 토큰 만들기`,nameLabel:`토큰 이름`,namePlaceholder:`예: Home Assistant`,daysLabel:`만료까지 일 수`,submit:`만들기`,hint:`최대 수명은 365일입니다. 토큰 값은 생성 시 한 번만 표시됩니다 — 지금 복사하세요.`},created:{camWallUrlTitle:`이 화면용 카메라 월 주소`,camWallUrlHint:`이 주소를 화면에서 여세요. 주소를 읽을 수 있는 사람은 누구나 월을 볼 수 있으므로 열쇠처럼 다루세요. 토큰을 취소하면 해당 화면의 접근이 차단됩니다.`,overlayUrlTitle:`OBS용 오버레이 주소`,overlayUrlHint:`OBS에서 이것을 브라우저 소스로 추가하세요. /overlay/1의 숫자를 프린터의 번호(프린터 페이지의 주소에 표시됨)로 변경하세요. 주소를 읽을 수 있는 사람은 누구나 스트림을 볼 수 있으므로 열쇠처럼 다루세요 — 접근을 차단하려면 토큰을 취소하세요.`,title:`토큰 생성됨 — 지금 복사하세요`,warning:`이 토큰은 이 번만 볼 수 있습니다. 이 대화상자를 닫으면 다시는 볼 수 없습니다.`,copy:`복사`,dismiss:`저장했습니다`},list:{scope:`범위`,myTitle:`내 토큰`,allTitle:`모든 사용자 (관리자 보기)`,empty:`아직 토큰 없음.`,name:`이름`,owner:`소유자`,prefix:`접두사`,created:`생성일`,expires:`만료일`,lastUsed:`마지막 사용`,revoke:`취소`,expired:`만료됨`},toast:{created:`토큰 생성됨`,createFailed:`토큰 생성 실패`,revoked:`토큰 취소됨`,revokeFailed:`토큰 취소 실패`,loadFailed:`토큰 불러오기 실패`,copied:`클립보드에 복사됨`,copyFailed:`복사 실패 — 수동으로 선택하여 복사하세요`}},forecast:{title:`예측`,noSpools:`활성 스풀을 찾을 수 없습니다. 예측 데이터를 보려면 재고에 스풀을 추가하세요.`,noUsageData:`사용 데이터를 사용할 수 없습니다 — 재고 타임라인을 예측할 수 없습니다.`,sku:`SKU`,material:`재료`,stock:`재고`,dailyRate:`소비율`,daysLeft:`남은 일수`,emptyBy:`소진 예정일`,reorderBy:`재주문 기한`,actions:`작업`,trend:`추세`,estimated:`추정`,noData:`데이터 없음`,timeframe:`기간`,chartTitle:`예상 재고 — 상위 5개 재료`,dashedLinesROP:`점선 = 재주문 시점`,stockLevel:`재고 수준`,reorderPoint:`재주문 시점`,safetyMargin:`안전 마진`,trendLegend:`추세 (기록 기반, 95% 서비스 수준)`,estimatedLegend:`추정 (무게 변화)`,noDataLegend:`데이터 없음`,ropLabel:`ROP`,ssLabel:`SS`,safetyStockLegend:`안전 재고`,stockArrivalLegend:`재고 입고`,stockoutLegend:`재고 소진`,alertCount_one:`{{count}}개 알림`,alertCount_other:`{{count}}개 알림`,order:`주문`,save:`저장`,cancel:`취소`,settingsSaved:`설정 저장됨`,failedSaveSettings:`설정 저장 실패`,globalLeadTimeSaved:`전역 리드 타임 저장됨`,globalLeadTime:`전역 리드 타임`,globalLeadTimeHint:`전역 리드 타임 하한값 — 모든 SKU의 재주문 시점 계산에 사용됨`,skuLeadTimeOverride:`SKU 리드 타임 재정의`,skuLeadTimeHint:`0 = 전역 리드 타임 사용. 이 SKU에 대해 재정의하려면 >0으로 설정.`,safetyMarginLabel:`안전 마진`,effectiveLeadTime:`유효 리드 타임`,effectiveLeadTimeHint:`max(전역 {{global}}일, SKU {{sku}}일)`,reorderPointHint:`d̄ × LT + 안전 마진 — 재고가 이 수준에 도달하면 주문`,safetyMarginHint:`통계적 안전 재고 (z=1.65 × σ × √LT) + 사용자 정의 버퍼`,safetyMarginHintDays:`통계적 안전 재고 위에 추가되는 버퍼.{{approx}}`,safetyMarginHintDaysApprox:` ≈ 현재 소비율로 {{g}}g.`,safetyMarginHintG:`통계적 안전 재고 위에 추가되는 고정 무게 버퍼.{{approx}}`,safetyMarginHintGApprox:` ≈ 현재 소비율로 {{days}}일.`,individualSpools:`개별 스풀`,labelWeight:`라벨`,spoolCount_one:`스풀 {{count}}개`,spoolCount_other:`스풀 {{count}}개`,stockBreakRisk:`재고 소진 위험`,stockBreakDetail:`{{days}}일 남음, 리드 타임 {{lt}}일.`,stockBreakBefore:`보충 전 재고 소진`,reorderNow:`지금 재주문`,reorderTriggerPassed:`트리거 날짜 {{date}}가 지났습니다.`,shoppingList:`쇼핑 목록`,shoppingListItems_one:`({{count}}개 항목)`,shoppingListItems_other:`({{count}}개 항목)`,shoppingListEmpty:`쇼핑 목록이 비어 있습니다. 항목을 추가하려면 행의 장바구니 아이콘을 클릭하세요.`,addToCart:`쇼핑 목록에 추가`,alertsSnoozed:`이 SKU의 알림 음소거`,alertsEnabled:`이 SKU의 알림 음소거 해제`,addedToCart:`쇼핑 목록에 추가됨`,failedAddItem:`항목 추가 실패`,listView:`목록`,logisticsView:`물류`,qty:`수량`,weight:`무게`,leadTime:`리드 타임`,expectedRestock:`예상 재입고`,status:`상태`,note:`메모`,pending:`대기 중`,purchased:`구매됨`,received:`수령됨`,markPurchased:`구매됨으로 표시`,markReceived:`수령됨으로 표시 — 재고에 스풀 추가`,resetToPending:`대기 중으로 초기화`,remove:`제거`,clearAll:`모두 초기화`,downloadCsv:`CSV`,addToCartTitle:`쇼핑 목록에 추가`,byQuantity:`수량 기준`,byDuration:`기간 기준`,numberOfSpools:`스풀 수`,lastHowManyDays:`몇 일 동안 지속되어야 합니까?`,noUsageQty:`사용 데이터 없음 — 수량을 1로 설정합니다.`,noteOptional:`메모 (선택사항)`,notePlaceholder:`예: 프로젝트 X용, 긴급…`,addNSpools_one:`스풀 {{count}}개 추가`,addNSpools_other:`스풀 {{count}}개 추가`,onArrival:`입고 시`,stockBreakIn:`{{days}}일 후 재고 소진.`,stockRunsOutBefore:`{{lt}}일 리드 타임이 경과하기 전에 재고가 소진됩니다.`,atRate:`{{rate}}g/일 소비율로`,moreSpools_one:`스풀 {{count}}개 더`,moreSpools_other:`스풀 {{count}}개 더`,bridgeGap:`격차를 메우기 위해 필요합니다.`,noReadAccess:`재고 예측을 볼 권한이 없습니다.`,noWriteAccess:`예측 설정을 수정할 권한이 없습니다.`},diagnostic:{modalTitle:`연결 진단 — {{name}}`,running:`진단 실행 중...`,runningElapsed:`진단 실행 중... ({{elapsed}}초)`,waitingForReportHint:`프린터가 상태 보고를 게시하기를 기다리는 중 — 최대 {{max}}초 걸릴 수 있습니다.`,runFailed:`진단 실행 실패: {{error}}`,retry:`다시 실행`,runButton:`진단 실행`,sectionTitle:`연결 진단`,sectionDescription:`프린터가 연결되지 않거나 인쇄되지 않는 이유를 확인합니다 — 포트 연결 가능 여부, LAN 개발자 모드, Docker 네트워크 모드, 자격증명.`,noPrinters:`구성된 프린터가 없습니다.`,overall:{ok:`문제가 발견되지 않았습니다 — 프린터 연결이 정상입니다.`,warnings:`프린터가 작동하지만 일부 항목에 주의가 필요합니다.`,problems:`프린터가 연결되지 않거나 인쇄되지 않는 원인이 되는 문제가 발견되었습니다.`},check:{port_mqtt:{title:`제어 포트 (MQTT 8883)`,pass:`연결 가능 — 프린터가 제어 연결을 수락하고 있습니다.`,fail:`포트 8883에 연결할 수 없습니다. 프린터가 꺼져 있거나, IP 주소가 다르거나, 방화벽이 차단하고 있습니다. 프린터 IP를 확인하고 포트 8883이 차단되지 않았는지 확인하세요.`},port_ftps:{title:`파일 전송 포트 (FTPS 990)`,pass:`연결 가능 — 인쇄 파일 전송이 작동합니다.`,warn:`포트 990에 연결할 수 없습니다. 모니터링은 작동할 수 있지만 프린터로 파일 전송에 실패합니다. 포트 990이 차단되지 않았는지 확인하세요.`,warn_no_tls:`포트 990은 열려 있지만 프린터의 파일 서비스가 TLS 핸드셰이크를 완료하지 못합니다. 인쇄 파일, 미리보기, 타임랩스를 가져올 수 없어 아카이브가 비어 있게 됩니다. 프린터를 재시작하세요 — 포트 차단을 해제해도 해결되지 않습니다.`},external_storage:{title:`전송된 파일을 외부 저장소에 저장 (설치 단계 4)`,pass:`프린터가 이 옵션이 켜져 있다고 보고합니다 — 전송된 파일이 SD 카드에 저장되며 아카이브에 썸네일과 슬라이서 메타데이터가 포함됩니다.`,fail:`프린터가 이 옵션이 꺼져 있다고 보고합니다. "전송된 파일을 외부 저장소에 저장"을 활성화하세요 — 최신 펌웨어 (P2S 01.02 / Bambu Studio 2.6 이상)에서는 프린터의 인쇄 설정에 토글이 있고, 이전 버전에서는 Bambu Studio / OrcaSlicer의 장치 탭에 있습니다. 이 옵션이 없으면 아카이브된 모든 인쇄물에 썸네일과 슬라이서 메타데이터가 없습니다.`,skip:`확인되지 않음 — 활성 MQTT 연결이 필요합니다. 이 설정이 슬라이서에만 존재하는 이전 슬라이서에서는 프린터가 보고하지 않으므로, 옵션이 꺼져 있어도 이 검사는 통과합니다 — 설치 단계 4를 수동으로 확인하세요.`,skip_unsupported_model:`이 모델에는 SD 슬롯이 있지만 옵션을 켤 방법이 없습니다 — 현재 P1 시리즈 펌웨어는 Bambu Studio에 토글을 표시하지 않으며 프린터에 화면도 없습니다. 여기서 고칠 것은 없습니다. Bambu Lab이 펌웨어로 지원할 때까지 보관된 출력물에는 썸네일과 슬라이서 메타데이터가 없을 수 있습니다.`,fail_no_media:`옵션은 켜져 있지만 프린터 슬롯에 카드도 USB도 감지되지 않아 보낸 파일이 갈 곳이 없습니다. 하나 넣고 다시 출력하세요. 그전까지는 보관되는 모든 출력물에 썸네일과 슬라이서 메타데이터가 없습니다.`,warn_internal_storage:`옵션이 켜져 있고 저장소도 있지만 마지막 출력물은 Bambuddy가 읽을 수 없는 프린터 내부 저장소에 저장되었습니다. H2 시리즈, P2S, X2D에서는 이 설정과 관계없이 Bambu Studio의 «인쇄» 버튼이 항상 그쪽으로 보냅니다. 출력물은 이름과 시간과 함께 보관되지만 썸네일과 슬라이서 메타데이터는 없습니다. 완전한 기록을 남기려면 Bambuddy에서 출력을 시작하거나, OrcaSlicer로 슬라이싱하거나, Bambu Studio에서 «보내기»로 «외부 저장소»를 고른 뒤 출력을 시작하세요.`,warn_internal_history:`옵션은 켜져 있고 저장소도 있지만, 마지막 출력은 이미 프린터에 있던 파일에서 실행되었습니다 — 화면에서의 재출력, Handy에서의 시작, 또는 이전에 보낸 파일입니다. 그 라이브러리는 Bambuddy가 읽을 수 없는 내부 저장소에 있으며, 그 출력에서는 아무것도 전송되지 않았으므로 어떤 설정으로도 바뀌지 않습니다. 이름과 시간과 함께 보관되기는 하지만 썸네일과 슬라이서 메타데이터는 없습니다. 온전한 보관을 원하면 Bambuddy에서 출력을 시작하거나 슬라이서에서 전송하세요.`},port_rtsps:{title:`카메라 포트 ({{protocol}} {{port}})`,pass:`연결 가능 — 카메라 스트림이 작동합니다.`,warn:`포트 {{port}}에 연결할 수 없습니다. 라이브 카메라 보기가 작동하지 않습니다. 인쇄에는 영향을 주지 않습니다.`},macos_local_network:{title:`macOS 로컬 네트워크 권한`,pass:`macOS가 Bambuddy의 로컬 네트워크 접근을 허용하고 있습니다.`,warn_unsigned:`Bambuddy를 실행하는 Python에 코드 서명이 없어 macOS가 로컬 네트워크 권한을 연결할 대상을 찾지 못하고, 프린터로 향하는 모든 연결을 오류도 확인 창도 없이 조용히 차단합니다. 서명을 수행하는 Bambuddy 업데이트 스크립트(install/update_macos.sh)를 실행한 다음 Bambuddy를 재시작하십시오. 인터프리터: {{executable}}`,warn_permission:`프린터가 켜져 있고 이 주소로 연결할 수 있다면 시스템 설정 > 개인 정보 보호 및 보안 > 로컬 네트워크를 열어 Bambuddy의 Python이 활성화되어 있는지 확인하십시오. 활성화되어 있지 않으면 macOS는 로컬 연결을 조용히 차단하며, Python을 업데이트하면 이전 권한이 남지 않을 수 있습니다.`},network_mode:{title:`컨테이너 네트워크 모드`,genericRuntime:`컨테이너`,pass:`{{runtime}}에서 호스트 네트워크로 실행 중입니다.`,warn:`Bambuddy가 {{runtime}}에서 브리지 네트워크로 실행 중입니다. 프린터 검색과 가상 프린터에는 호스트 네트워크가 필요합니다 — 호스트 네트워크로 컨테이너를 재생성하세요(docker-compose에서는 "network_mode: host", Podman에서는 "--network=host").`,skip:`컨테이너에서 실행 중이 아닙니다 — 해당 없음.`,skip_unknown:`Bambuddy가 {{runtime}}에서 실행 중이지만 네트워크 모드를 확인할 수 없습니다. 프린터 검색이나 가상 프린터가 작동하지 않으면 호스트 네트워크로 컨테이너를 재생성하세요.`,skip_system_container:`Bambuddy가 {{runtime}} 시스템 컨테이너에서 실행 중이며, 가상 머신처럼 LAN에 연결되어 있습니다 — 해당 없음.`},subnet:{title:`네트워크 서브넷`,pass:`프린터와 Bambuddy가 같은 서브넷에 있습니다.`,warn:`프린터({{printer_ip}})와 Bambuddy({{host_ip}})가 다른 서브넷에 있습니다. 서브넷 간 라우팅이 구성되어 있지 않으면 서로 연결하지 못할 수 있습니다.`,skip:`서브넷을 확인할 수 없어 건너뜁니다.`},mqtt_auth:{title:`프린터 자격증명`,pass:`프린터가 연결을 수락했습니다.`,fail:`프린터에 도달할 수 있지만 Bambuddy가 연결되지 않았습니다. 액세스 코드 또는 시리얼 번호가 잘못됐을 가능성이 높습니다 — LAN 전용 모드나 개발자 모드를 토글할 때마다 액세스 코드가 변경되므로 프린터 화면에서 다시 복사하세요. 재부팅 중이거나 이미 동시 연결 한도에 도달한 프린터도 똑같이 보입니다.`,fail_auth_rejected:`프린터가 Bambuddy의 자격증명을 거부했습니다. 액세스 코드 또는 시리얼 번호가 잘못됐습니다 — LAN 전용 모드나 개발자 모드를 토글할 때마다 액세스 코드가 변경됩니다. 프린터 화면에서 다시 복사한 뒤 프린터 설정에 저장하세요.`,skip:`확인하지 않음 — 프린터에 연결할 수 없었습니다.`},developer_mode:{title:`LAN 개발자 모드`,pass:`개발자 모드가 활성화되어 있습니다.`,fail:`프린터에서 개발자 모드가 꺼져 있습니다. 프린터의 LAN 설정에서 활성화하고 확인을 누르세요. 이 없으면 인쇄가 시작되지 않습니다.`,skip:`확인할 수 없음 — 프린터에 연결되어 있어야 합니다.`},printer_publishing:{title:`프린터가 상태를 게시 중`,pass:`프린터가 상태 업데이트를 게시하고 있습니다 — AMS, 필라멘트, K-프로파일이 슬라이서에 올바르게 반영됩니다.`,fail:`MQTT 브로커는 연결을 수락했지만 프린터가 상태 보고를 게시하지 않았습니다. 거의 항상 시리얼 번호가 잘못되었거나 대소문자가 일치하지 않아서 발생합니다 — device/<serial>/report 토픽은 대소문자를 구분합니다. 프린터 설정의 시리얼 번호를 프린터 화면 표시와 비교해 확인하세요.`,skip:`확인할 수 없음 — 프린터에 연결되어 있어야 합니다.`}}},systemHealth:{sectionTitle:`시스템 상태`,sectionDescription:`최근 로그에서 지원 티켓이 되기 전에 직접 해결할 수 있는 알려진 문제를 스캔합니다.`,rescan:`다시 스캔`,clean:`최근 {{times}}개 로그 항목에서 알려진 문제가 발견되지 않았습니다.`,logUnavailable:`파일 로깅이 비활성화되어 로그를 스캔할 수 없습니다. 이 확인을 사용하려면 파일 로깅을 활성화하세요.`,learnMore:`수정 방법`,fixLabel:`수정:`,occurrences:`{{times}}회 발견 — 마지막: {{lastSeen}}`,category:{layer8:`직접 해결 가능`,environment:`환경`,bug:`버그 보고 바람`},signature:{"ftp-auth-rejected":{name:`프린터가 액세스 코드를 거부함`,cause:`프린터가 파일 전송 로그인을 거부했습니다. 액세스 코드가 잘못됐거나 개발자 모드를 토글한 후 변경됐습니다.`,fix:`프린터 화면(LAN 설정)에서 액세스 코드를 다시 복사하여 Bambuddy의 프린터 설정에서 업데이트하세요.`},"ftp-connection-timeout":{name:`파일 전송 연결 시간 초과`,cause:`Bambuddy가 프린터의 파일 전송 포트(FTPS 990)에 연결할 수 없었습니다. 포트가 차단됐거나 프린터가 꺼져 있거나 다른 서브넷에 있습니다.`,fix:`Bambuddy와 프린터 사이에서 포트 990을 차단하는 것이 없는지 확인하고, 같은 네트워크에 있는지 확인하세요.`},"ftp-ssl-error":{name:`보안 파일 전송 핸드셰이크 실패`,cause:`프린터의 파일 서비스가 990 포트에서 TLS 없이 응답했습니다. 프린터 쪽 파일 서버가 멈춘 상태이며 방화벽이나 펌웨어 문제가 아닙니다.`,fix:`프린터를 재시작하세요. 그때까지 인쇄 파일, 커버 이미지, 타임랩스를 가져올 수 없지만 인쇄 자체에는 영향이 없습니다.`},"bambu-cloud-captcha":{name:`Bambu Cloud가 CAPTCHA를 요구합니다`,cause:`Bambu의 남용 방지 계층이 이 네트워크를 확인하고 있어 Bambu Cloud 로그인을 완료할 수 없습니다. 계정이나 이 설치 환경이 아니라 공용 IP 주소에 연결된 문제입니다.`,fix:`기다리세요. 보통 몇 시간 안에 해제되며 로그인을 반복하면 더 길어집니다. 그동안에는 브라우저 세션에서 가져온 액세스 토큰으로 로그인하세요.`},"mqtt-connection-flapping":{name:`프린터 연결이 계속 끊김`,cause:`제어 연결(MQTT 8883)이 반복적으로 끊어지고 다시 연결됩니다 — 주로 불안정한 네트워크 경로나 부분적으로 차단된 포트가 원인입니다.`,fix:`프린터의 Wi-Fi 신호를 확인하고, 유선 연결을 권장하며, 포트 8883이 안정적으로 연결 가능한지 확인하세요.`},"camera-connection-refused":{name:`카메라 스트림 연결 불가`,cause:`포트 RTSPS 322에서 라이브 카메라에 연결할 수 없었습니다. 포트가 차단됐거나 프린터에서 카메라 또는 LAN 라이브뷰가 꺼져 있습니다.`,fix:`프린터에서 카메라와 LAN 라이브뷰를 활성화하고 포트 322가 차단되지 않았는지 확인하세요. 인쇄에는 영향을 주지 않습니다.`},"database-locked":{name:`데이터베이스 쓰기 경합`,cause:`SQLite 데이터베이스에 부하 시 "database is locked" 오류가 발생합니다 — 여러 프린터를 동시에 실행할 때 흔한 문제입니다.`,fix:`Bambuddy를 외부 PostgreSQL 데이터베이스로 전환하세요. 설명서의 PostgreSQL 가이드를 참고하세요.`}}},vpDiagnostic:{title:`설정 확인 — {{name}}`,runButton:`설정 확인 실행`,running:`설정 확인 실행 중...`,runFailed:`설정 확인을 실행할 수 없습니다: {{error}}`,retry:`다시 실행`,overall:{ok:`모든 확인이 통과됐습니다 — 이 가상 프린터가 올바르게 설정되었습니다.`,warnings:`가상 프린터가 작동하지만 일부 항목에 주의가 필요합니다.`,problems:`슬라이서가 이 가상 프린터를 인식하거나 사용할 수 없는 원인이 되는 문제가 발견되었습니다.`},check:{enabled:{title:`가상 프린터 활성화`,fail:`이 가상 프린터가 꺼져 있습니다. 검색 가능하게 하려면 켜세요.`},running:{title:`서비스 실행 중`,fail:`가상 프린터가 활성화됐지만 서비스가 실행 중이 아닙니다. Bambuddy 로그를 확인하세요 — 바인드 IP 충돌이나 권한 오류가 보통 원인입니다.`},bind_interface:{title:`바인드 네트워크 인터페이스`,fail:`바인드 인터페이스가 설정되지 않았거나 이 호스트에 더 이상 존재하지 않습니다. 바인드 인터페이스 드롭다운에서 현재 인터페이스를 선택하세요.`},access_code:{title:`액세스 코드 설정됨`,fail:`액세스 코드가 설정되지 않았습니다. 슬라이서에는 여기에 설정한 것과 동일한 8자리 액세스 코드가 필요합니다.`},target_printer:{title:`대상 프린터`,fail:`대상 프린터가 선택되지 않았습니다. 프록시 모드에는 실제 프린터가 필요합니다.`,warn:`대상 프린터가 현재 오프라인입니다 — 재연결되면 프록시가 재개됩니다.`},port_ftps:{title:`파일 업로드 서비스 (포트 {{port}})`,fail:`바인드 IP의 포트 {{port}}에서 수신 중인 서비스가 없어 슬라이서가 파일을 업로드할 수 없습니다. 이 인터페이스의 포트 충돌이 일반적인 원인입니다.`},port_mqtt:{title:`제어 서비스 (포트 {{port}})`,fail:`바인드 IP의 포트 {{port}}에서 수신 중인 서비스가 없어 슬라이서가 연결하거나 상태를 표시할 수 없습니다.`},port_bind:{title:`검색 서비스 (포트 {{port}})`,fail:`바인드 IP의 포트 {{port}}에서 수신 중인 서비스가 없어 슬라이서의 검색 핸드셰이크가 실패합니다.`},privileged_ports:{title:`특권 포트 바인딩`,fail:`포트 {{port}}은(는) 1024 미만이며 이 서비스에는 바인딩 권한이 없습니다. 위에서 아무것도 수신 대기하지 않는 이유입니다. /etc/systemd/system/bambuddy.service에 AmbientCapabilities=CAP_NET_BIND_SERVICE를 추가하고 재시작하거나 "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))"를 실행하세요. Docker에서는 cap_add: [NET_BIND_SERVICE]를 추가합니다.`},certificate:{title:`TLS 인증서`,pass:`인증서가 준비됐습니다. Bambuddy CA 인증서(위)가 슬라이서의 신뢰 저장소에 가져와져 있는지 확인하세요.`,fail:`이 가상 프린터의 TLS 인증서가 없습니다. Bambuddy 데이터 디렉터리가 쓰기 가능한지 확인하세요.`}}}}},"pt-BR":{translation:{nav:{printers:`Impressoras`,archives:`Arquivos`,queue:`Fila de impressão`,stats:`Estatísticas`,profiles:`Perfis`,maintenance:`Manutenção`,projects:`Projetos`,inventory:`Inventário`,finance:`Finanças`,files:`Gerenciador de Arquivos`,makerworld:`MakerWorld`,notifications:`Notificações`,settings:`Configurações`,system:`Sistema`,collapseSidebar:`Recolher barra lateral`,expandSidebar:`Expandir barra lateral`,update:`Atualizar`,updateAvailable:`Atualização disponível: v{{version}}`,updateAvailableBanner:`Versão {{version}} está disponível!`,viewUpdate:`Ver atualização`,viewOnGithub:`Ver no GitHub`,keyboardShortcuts:`Atalhos de teclado (?)`,switchToLight:`Mudar para modo claro`,switchToDark:`Mudar para modo escuro`,switchToSystem:`Mudar para modo do sistema`,smartSwitches:`Interruptores inteligentes`,logout:`Sair`,installApp:`Instalar app`,installAppSuccess:`Bambuddy foi instalado`},common:{plusNMore:`+{{count}} outros`,save:`Salvar`,saving:`Salvando...`,cancel:`Cancelar`,delete:`Excluir`,edit:`Editar`,add:`Adicionar`,close:`Fechar`,confirm:`Confirmar`,loading:`Carregando...`,error:`Erro`,errorLoading:`Erro ao carregar`,retry:`Tentar novamente`,success:`Sucesso`,warning:`Aviso`,enabled:`Ativado`,disabled:`Desativado`,yes:`Sim`,no:`Não`,on:`Ligado`,off:`Desligado`,all:`Todos`,none:`Nenhum`,search:`Pesquisar`,filter:`Filtrar`,sort:`Ordenar`,refresh:`Atualizar`,download:`Baixar`,upload:`Enviar`,uploading:`Enviando...`,uploadFailed:`Falha no envio`,actions:`Ações`,status:`Status`,name:`Nome`,description:`Descrição`,date:`Data`,time:`Hora`,hours:`Horas`,minutes:`Minutos`,seconds:`Segundos`,days:`Dias`,enable:`Ativar`,disable:`Desativar`,permissions:`Permissões`,noPrinters:`Nenhuma impressora configurada`,noData:`Nenhum dado disponível`,linkNotFound:`Link não encontrado`,required:`Obrigatório`,optional:`Opcional`,dismiss:`Dispensar`,apply:`Aplicar`,reset:`Redefinir`,export:`Exportar`,import:`Importar`,clear:`Limpar`,selectAll:`Selecionar tudo`,deselectAll:`Desmarcar tudo`,noChange:`— Sem alterações —`,unchanged:`Inalterado`,unassigned:`Não atribuído`,unknown:`Desconhecido`,unknownError:`Erro desconhecido`,today:`Hoje`,tomorrow:`Amanhã`,asap:`O mais rápido possível`,overdue:`Atrasado`,now:`Agora`,collapse:`Recolher`,expand:`Expandir`,previous:`Anterior`,next:`Próximo`,viewArchive:`Ver arquivo`,viewInFileManager:`Ver no Gerenciador de Arquivos`,addedBy:`Adicionado por {{username}}`,prints:`impressões`,more:`+{{count}} mais`,ascending:`Crescente`,descending:`Decrescente`,back:`Voltar`,copy:`Copiar`,copied:`Copiado!`,printer:`Impressora`,remove:`Remover`,type:`Tipo`,print:`Imprimir`,rename:`Renomear`,move:`Mover`,create:`Criar`,duplicate:`Duplicar`,left:`Esquerda`,right:`Direita`,user:`Usuário`,run:`Executar`,running:`Executando...`},finance:{allTypes:`Todos os tipos`,allCostCenters:`Todos os centros de custo`,title:`Finanças`,subtitle:`Carteira, transações pessoais e centros de custo`,noAccess:`Você não tem permissão para visualizar dados financeiros.`,personalView:`Visualização pessoal`,adminView:`Visualização do administrador`,createCostCenter:`Criar centro de custo`,adjustWallet:`Ajustar carteira`,addManualPrint:`Adicionar impressão manual`,manageMembers:`Gerenciar membros do centro de custo`,currentBalance:`Saldo pessoal`,transactions:`Transações`,personalTransactions:`Transações pessoais`,costCenters:`Centros de custo`,availableForPrinting:`Disponível para atribuição de impressão`,costCenterName:`Nome`,budgetType:`Tipo de orçamento`,monthlyBudget:`Orçamento mensal`,totalBudget:`Orçamento total`,noBudget:`Sem orçamento`,create:`Criar`,selectUser:`Selecionar usuário`,transactionType:`Tipo`,amount:`Valor`,noCostCenter:`Sem centro de custo`,descriptionOptional:`Descrição (opcional)`,applyAdjustment:`Aplicar ajuste`,memberCanPrint:`Membro pode imprimir`,addMember:`Adicionar membro`,canPrint:`Pode imprimir`,noMembers:`Nenhum membro atribuído.`,editCostCenter:`Editar centro de custo`,myCostCenters:`Meus centros de custo`,costCentersHint:`Revise os limites de orçamento e mantenha os custos sob controle`,noCostCenters:`Nenhum centro de custo encontrado.`,owner:`Proprietário`,balance:`Saldo da conta`,unlimited:`Ilimitado`,budgetPolicyHint:`Os saldos das contas registram os custos. A impressão é limitada apenas pelo orçamento do centro de custo selecionado; sem orçamento, é ilimitada.`,budget:`Orçamento`,shared:`Compartilhado`,cannotEditPrivateCostCenter:`Centros de custo privados não podem ser editados aqui`,recentTransactions:`Transações recentes`,transactionsHint:`Filtre por tipo e centro de custo`,first:`Primeira`,prev:`Anterior`,next:`Próxima`,last:`Última`,pageNumberOf:`Página {{page}} de {{total}}`,noTransactions:`Nenhuma transação disponível.`,noTransactionsForFilter:`Nenhuma transação corresponde aos filtros selecionados.`,costCenter:`Centro de custo`,balanceAfter:`Saldo após`,userWithId:`Usuário #{{id}}`,partial:`Parcial`,editTransaction:`Editar transação`,selectCostCenter:`Selecionar centro de custo...`,costCenterRequired:`Por favor, selecione um centro de custo`,amountExample:`ex.: 4,00`,manualAdjustmentExample:`ex.: Ajuste manual`,userRequired:`Por favor, selecione um usuário`,amountInvalid:`O valor deve ser um número válido`,createdCostCenter:`Centro de custo criado`,createCostCenterFailed:`Falha ao criar o centro de custo`,transactionDeleted:`Transação excluída`,deleteTransactionFailed:`Falha ao excluir a transação`,transactionEdited:`Transação atualizada e razão recalculada`,editTransactionFailed:`Falha ao editar a transação`,manualPrintCreated:`Cobrança de impressão manual adicionada e razão recalculada`,manualPrintFailed:`Falha ao criar a impressão manual`,memberSaved:`Membro salvo`,memberSaveFailed:`Falha ao salvar o membro`,memberRemoved:`Membro removido`,memberRemoveFailed:`Falha ao remover o membro`,costCenterNameRequired:`O nome do centro de custo é obrigatório`,costCenterUpdated:`Centro de custo atualizado`,costCenterUpdateFailed:`Falha ao atualizar o centro de custo`,confirmDeleteCostCenter:`Excluir o centro de custo "{{name}}"?`,costCenterDeleted:`Centro de custo excluído`,costCenterDeleteFailed:`Falha ao excluir o centro de custo`,deleteTransactionConfirm:`Excluir essa transação? Os saldos serão recalculados automaticamente.`,deposit:`Depósito`,withdraw:`Saque`,printCharge:`Cobrança de impressão`,deleteTransaction:`Excluir transação`},printers:{addPreflight:{checking:`Verificando a conexão...`,warning:`Algumas verificações de conexão falharam. Esta impressora pode aparecer como offline. Revise as verificações abaixo, corrija o que puder ou salve mesmo assim.`,back:`Voltar`,saveAnyway:`Salvar mesmo assim`},title:`Impressoras`,addPrinter:`Adicionar Impressora`,editPrinter:`Editar Impressora`,deletePrinter:`Excluir Impressora`,printerName:`Nome da Impressora`,serialNumber:`Número de Série`,ipAddress:`Endereço IP / Nome do Host`,accessCode:`Código de Acesso`,model:`Modelo`,nozzleCount:`Número de Bicos`,autoArchive:`Arquivamento Automático`,status:{available:`Disponível`,idle:`Ocioso`,printing:`Imprimindo`,paused:`Pausado`,offline:`Offline`,problem:`Problema`,error:`Erro`,finished:`Concluído`,unknown:`Desconhecido`},temperatures:{nozzle:`Bico`,bed:`Cama`,chamber:`Câmara`},heaterHistory:{title:`Histórico de aquecedores`,openLabel:`Ver histórico de aquecedores`,nozzle:`Bico`,nozzle2:`Bico 2`,bed:`Cama`,chamber:`Câmara`,error:`Falha ao carregar histórico`,empty:`Nenhum dado registrado ainda`},progress:`{{percent}}% concluído`,timeRemaining:`{{time}} restante`,deleteConfirm:`Tem certeza de que deseja excluir "{{name}}"?`,maintenanceOk:`Manutenção OK`,maintenanceWarning:`{{count}} aviso`,maintenanceWarning_plural:`{{count}} avisos`,maintenanceDue:`{{count}} devido`,maintenanceDue_plural:`{{count}} devido`,sort:{name:`Nome`,status:`Status`,model:`Modelo`,location:`Localização`,eta:`Tempo restante`,ascending:`Ordem crescente`,descending:`Ordem decrescente`},cardSize:{small:`Cartões pequenos`,medium:`Cartões médios`,large:`Cartões grandes`,extraLarge:`Cartões extra grandes`},pageView:{openCamWallPage:`Abrir o mural de câmeras como página`,cards:`Cartões`,camWall:`Mural de câmeras`},camWall:{page:{tokenRejected:`Este link do mural de câmeras não é mais válido. O token pode ter expirado ou sido revogado.`,loadFailed:`Não foi possível carregar as impressoras.`},noPrinters:`Nenhuma impressora para exibir`,noSignal:`Sem sinal`,live:`Ao vivo`,snap:`Foto`,off:`Desligado`,summary:`{{live}} ao vivo, {{snap}} fotos, {{total}} no total`,layer:`Camada {{cur}}/{{total}}`,timeLeft:`faltam {{time}}`,statusMode:{off:`Desligado`,compact:`Compacto`,full:`Completo`},settings:{title:`Configurações do mural de câmeras`,maxLive:`Máx. transmissões ao vivo`,maxLiveHint:`Quantos blocos transmitem ao vivo simultaneamente. Os demais atualizam como fotos.`,snapshotInterval:`Intervalo de foto (segundos)`,snapshotIntervalHint:`Com que frequência os blocos não ao vivo buscam uma nova foto.`,statusOverlay:`Sobreposição de status`,statusOverlayHint:`Compacto: apenas o selo de status. Completo: + progresso, camada e tempo restante.`}},hideOffline:`Ocultar offline`,nextAvailable:`Próximo disponível`,powerOn:`Ligar`,offlinePrintersWithPlugs:`Impressoras offline com tomadas inteligentes`,noPrintersConfigured:`Nenhuma impressora configurada ainda`,search:`Pesquisar impressoras...`,noSearchResults:`Nenhuma impressora corresponde à sua pesquisa ou filtros`,filter:{allStatuses:`Todos os status`,allLocations:`Todos os locais`},toolbar:{filters:`Filtros`,view:`Visualização`,actions:`Ações`},readyToPrint:`Pronto para imprimir`,external:`Externo`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Excluir arquivos de impressão`,noLabel:`Sem etiqueta`,printPreview:`Pré-visualização de impressão`,width:`Largura`,height:`Altura`,noObjectsFound:`Nenhum objeto encontrado`,objectsLoadedOnPrintStart:`Objetos são carregados quando uma impressão começa`,willBeSkipped:`Será ignorado`,name:`Nome`,serialCannotBeChanged:`Número de série não pode ser alterado`,locationHelp:`Usado para agrupar impressoras e filtrar trabalhos na fila`,wifiSignal:{veryWeak:`Muito fraco`,weak:`Fraco`,fair:`Regular`,good:`Bom`,excellent:`Excelente`},maintenanceUpToDate:`Toda a manutenção está em dia - Clique para ver`,maintenance:{title:`Em manutenção`,subtitle:`Esta impressora está pausada — sem conexão, não elegível para a fila, sem enviar notificações.`,pillLabel:`Manutenção`,exitButton:`Sair da manutenção`,menuEnter:`Entrar no modo manutenção`,menuExit:`Sair do modo manutenção`,toastEntered:`{{name}} está agora em modo manutenção`,toastExited:`{{name}} está online novamente`,confirmMidPrintTitle:`Entrar em modo manutenção durante uma impressão?`,confirmMidPrintMessage:`{{name}} está imprimindo no momento. Entrar em modo manutenção desconectará o MQTT e interromperá o acompanhamento do progresso e as notificações de conclusão para este trabalho. Continuar?`,editFieldLabel:`Modo manutenção`,editFieldHelp:`Quando ativado, esta impressora é pausada do MQTT, despacho de fila e notificações — útil para reparos, instalações paralelas do Bambuddy ou suspensão temporária.`},chamberLightOn:`Ligar luz da câmara`,chamberLightOff:`Desligar luz da câmara`,files:`Arquivos`,browseFiles:`Procurar arquivos da impressora`,autoOffAfterPrint:`Desligamento automático após impressão`,autoOffExecuted:`Desligamento automático executado - ligue a impressora para reiniciar`,hmsErrors:`Erros HMS`,viewHmsErrors:`Ver {{count}} erro(s) HMS`,resume:`Retomar`,pause:`Pausar`,stop:`Parar`,camera:`âmera`,skipObject:`Ignorar objeto`,reconnect:`Reconectar`,forceRefresh:`Forçar atualização`,forceRefreshSuccess:`Atualização solicitada`,mqttDebug:`Depuração MQTT`,printerInformation:`Informações da impressora`,copyToClipboard:`Copiar`,copied:`Copiado!`,state:`Estado`,wifiSignalLabel:`Sinal WiFi`,developerMode:`Modo desenvolvedor`,enabled:`Ativado`,disabled:`Desativado`,addedOn:`Adicionada em`,sdCard:`Cartão SD`,inserted:`Inserido`,notInserted:`Não inserido`,totalPrintHours:`Horas de impressão`,activeNozzle:`Ativo: {{nozzle}} bico`,amsSwitchInletTooltip:`Comutador de trajeto de filamento IN-{{inlet}} ({{side}}) — alimenta os dois bicos`,nozzleRack:`Suporte de bicos`,nozzleDocked:`Acoplado`,nozzleMounted:`Montado`,nozzleActive:`Ativo`,nozzleIdle:`Ocioso`,nozzleDiameter:`Diâmetro`,nozzleType:`Tipo`,nozzleStatus:`Status`,nozzleFilament:`Filamento`,nozzleWear:`Desgaste`,nozzleMaxTemp:`Temp Máx`,nozzleSerial:`Número de série`,nozzleHardenedSteel:`Aço Endurecido`,nozzleStainlessSteel:`Aço Inoxidável`,nozzleTungstenCarbide:`Carboneto de Tungstênio`,nozzleFlow:`Fluxo`,nozzleHighFlow:`Alto Fluxo`,nozzleStandardFlow:`Fluxo Padrão`,firmwareUpdate:`Atualização de Firmware`,firmwareInstructions:`No visor da impressora, vá para`,firmwareNav:`Navegar para`,settings:`Configurações`,firmware:`Firmware`,discoverPrinters:`Descobrir Impressoras`,searching:`Procurando...`,manualEntry:`Entrada Manual`,addFromCloud:`Adicionar da Nuvem`,toast:{printerDeleted:`Impressora excluída`,missingSpoolAssignment:`Impressão iniciada em {{printer}}. Atribuição de bobina ausente para: {{slots}}`,killSwitchTriggered:`O bloqueio de segurança de cobrança interrompeu uma impressão não autorizada em {{printer}}: {{filename}}`,billingChargeFailed:`A cobrança de {{filename}} em {{printer}} falhou. A reserva do orçamento foi mantida; verifique os logs do servidor.`,assignmentVerified:`Filamento carregado no compartimento {{slot}} ({{printer}})`,assignmentVerifiedNoKprofile:`Compartimento {{slot}} em {{printer}} carregado, mas o perfil de calibração de fluxo (perfil K) não foi aplicado`,assignmentNotConfirmed:`Não foi possível confirmar a atribuição do compartimento {{slot}} em {{printer}} — verifique o compartimento AMS`,printerAdded:`Impressora adicionada`,printerUpdated:`Impressora atualizada`,failedToDelete:`Falha ao excluir impressora`,failedToAdd:`Falha ao adicionar impressora`,connectionFailedNotAdded:`Não foi possível conectar à impressora. Verifique o IP, o número de série e o código de acesso, e confirme que o modo somente LAN está ativado. A impressora não foi adicionada.`,failedToUpdate:`Falha ao atualizar impressora`,commandSent:`Comando enviado`,failedToSendCommand:`Falha ao enviar comando`,turnedOn:`{{name}} ligado`,failedToPowerOn:`Falha ao ligar {{name}}`,scriptTriggered:`Script acionado`,printStopped:`Impressão parada`,printPaused:`Impressão pausada`,printResumed:`Impressão retomada`,referenceDeleted:`Referência excluída`,detectionAreaSaved:`Área de detecção salva`,failedToRunScript:`Falha ao executar script`,failedToStopPrint:`Falha ao parar impressão`,failedToPausePrint:`Falha ao pausar impressão`,failedToResumePrint:`Falha ao retomar impressão`,failedToControlChamberLight:`Falha ao controlar a luz da câmara`,failedToSetSpeed:`Falha ao definir a velocidade de impressão`,failedToUpdateSetting:`Falha ao atualizar configuração`,failedToSkipObjects:`Falha ao ignorar objetos`,failedToRereadRfid:`Falha ao reler RFID`,failedToCheckPlate:`Falha ao verificar a placa`,failedToUpdateLabel:`Falha ao atualizar etiqueta`,failedToDeleteReference:`Falha ao excluir referência`,failedToSaveDetectionArea:`Falha ao salvar área de detecção`,plateCheckEnabled:`Verificação da placa ativada`,plateCheckDisabled:`Verificação da placa desativada`,calibrationSaved:`Calibração salva!`,calibrationFailed:`Falha na calibração`,rfidRereadInitiated:`Releitura de RFID iniciada`,loadInitiated:`Carregando filamento…`,unloadInitiated:`Descarregando filamento…`,failedToLoad:`Falha ao carregar filamento`,failedToUnload:`Falha ao descarregar filamento`},connection:{connected:`Conectado`,offline:`Offline`},plateStatus:{markCleared:`Marcar placa como liberada`,cleared:`Placa liberada`,notCleared:`Placa não liberada`,inUse:`Placa em uso`},queue:{inQueue:`{{count}} impressão na fila`,inQueue_plural:`{{count}} impressões na fila`},controls:`Controles`,rfid:{reread:`Releitura de RFID`},ams:{load:`Carregar`,unload:`Descarregar`,feedTitle:`Carregar {{slot}} em qual bico?`,feedPrompt:`O Filament Track Switch pode direcionar este slot para qualquer um dos hotends. Escolha qual alimentar.`,feedLeft:`Bico esquerdo`,feedRight:`Bico direito`,feedAlreadyLoaded:`Já carregado`,switchNotReady:`O Filament Track Switch ainda não foi configurado. Atribua cada AMS a uma entrada na impressora e tente novamente.`},bedJog:{limitWarning:`Os limites de curso não são aplicados durante movimentos manuais — um bug do firmware da Bambu ignora os fins de curso por software em comandos remotos. Mova com cuidado para evitar colisões.`,title:`Controles de movimento`,bed:`Mesa`,step:`Passo (mm)`,up:`Mover mesa para cima`,down:`Mover mesa para baixo`,toolheadUp:`Mover cabeçote para cima`,toolheadDown:`Mover cabeçote para baixo`,disabledWhilePrinting:`Desativado durante a impressão`,notHomedTitle:`Impressora não referenciada`,notHomedMessage:`A impressora não foi referenciada desde a última impressão. Execute a referência automática primeiro para um posicionamento seguro (estaciona o cabeçote, depois referencia X, Y e Z), ou mova assim mesmo — os fins de curso de software serão ignorados.`,homeZ:`Referência automática`,moveAnyway:`Mover assim mesmo`,homingStarted:`Referenciando impressora automaticamente…`},permission:{noAdd:`Você não tem permissão para adicionar impressoras`,noEdit:`Você não tem permissão para editar impressoras`,noDelete:`Você não tem permissão para excluir impressoras`,noControl:`Você não tem permissão para controlar impressoras`,noFiles:`Você não tem permissão para acessar arquivos de impressora`,noAmsRfid:`Você não tem permissão para reler RFID AMS`,noSmartPlugControl:`Você não tem permissão para controlar tomadas inteligentes`,noCamera:`Você não tem permissão para visualizar câmeras`},modal:{addTitle:`Adicionar Impressora`,editTitle:`Editar Impressora`,myPrinter:`Minha Impressora`,selectModel:`Selecionar modelo...`,locationGroup:`Localização / Grupo (opcional)`,locationPlaceholder:`ex.: Oficina, Escritório, Porão`,autoArchiveLabel:`Arquivar automaticamente impressões concluídas`,fromPrinterSettings:`A partir das configurações da impressora`,modelOptional:`Modelo (opcional)`,saveChanges:`Salvar alterações`},skipObjects:{tooltip:`Ignorar objetos`,onlyWhilePrinting:`Ignorar objetos (apenas durante a impressão)`,requiresMultiple:`Ignorar objetos (requer 2+ objetos)`,title:`Ignorar Objetos`,matchIdsInfo:`Correspondência de IDs com o display da sua impressora`,printerShowsIds:`A tela da impressora mostra os IDs dos objetos na placa de construção`,skipSelected:`Ignorar Selecionados`,skipping:`Ignorando...`,noObjectsSelected:`Nenhum objeto selecionado`,selectObjectsToSkip:`Selecione os objetos que deseja ignorar na impressão atual`,skipped:`Ignorado`,objectsSkipped:`Objetos ignorados`,activeCount:`{{count}} ativo`,waitForLayer:`Aguarde a camada 2+ para ignorar objetos (atualmente na camada {{layer}})`,skip:`Ignorar`,confirmTitle:`Ignorar Objeto?`,confirmMessage:`Tem certeza de que deseja ignorar "{{name}}"? Isso não pode ser desfeito.`,confirmAllMessage:`Todos os objetos restantes estão selecionados. Isso interromperá o trabalho de impressão. Continuar?`,confirmMultipleMessage:`Ignorar {{count}} objetos selecionados? Isso não pode ser desfeito.`},confirm:{deleteTitle:`Excluir Impressora`,deleteMessage:`Tem certeza de que deseja excluir "{{name}}"? Isso removerá todas as configurações de conexão.`,deleteArchivesNote:`Todo o histórico de impressão desta impressora será permanentemente excluído.`,keepArchivesNote:`O histórico de impressão será mantido, mas não estará mais associado a esta impressora.`,stopTitle:`Parar Impressão`,stopMessage:`Tem certeza de que deseja parar a impressão atual em "{{name}}"? Isso cancelará o trabalho de impressão.`,stopButton:`Parar Impressão`,pauseTitle:`Pausar Impressão`,pauseMessage:`Tem certeza de que deseja pausar a impressão atual em "{{name}}"?`,pauseButton:`Pausar Impressão`,resumeTitle:`Retomar Impressão`,resumeMessage:`Tem certeza de que deseja retomar a impressão em "{{name}}"?`,resumeButton:`Retomar Impressão`,powerOnTitle:`Ligar Impressora`,powerOnMessage:`Tem certeza de que deseja ligar a impressora "{{name}}"?`,powerOnButton:`Ligar`,powerOffTitle:`Desligar Impressora`,powerOffMessage:`Tem certeza de que deseja desligar a impressora "{{name}}"?`,powerOffWarning:`AVISO: "{{name}}" está imprimindo no momento! Tem certeza de que deseja desligar a impressora? Isso interromperá a impressão e pode danificar a impressora.`,powerOffButton:`Desligar`,haToggleTitle:`Alternar "{{name}}"`,haToggleMessage:`Alternar a entidade Home Assistant {{entity}}? Isso pode desligar a energia se estiver ligada no momento.`,haToggleWarning:`AVISO: "{{name}}" está imprimindo no momento! Alternar {{entity}} pode cortar a energia e interromper a impressão. Continuar?`,haToggleButton:`Alternar`},bulk:{select:`Selecionar`,selectAll:`Selecionar tudo`,selectByLocation:`Selecionar por local`,selected:`{{count}} selecionado(s)`,actions:{stop:`Parar`,pause:`Pausar`,resume:`Retomar`,clearPlate:`Limpar mesa`,clearHMS:`Limpar notificações`},confirm:{stopTitle:`Parar {{count}} impressões`,stopMessage:`Isso cancelará as impressões ativas em {{count}} impressora(s). Esta ação não pode ser desfeita.`,stopButton:`Parar todas`,pauseTitle:`Pausar {{count}} impressões`,pauseMessage:`Isso pausará as impressões ativas em {{count}} impressora(s).`,pauseButton:`Pausar todas`,clearPlateTitle:`Limpar {{count}} mesas de impressão`,clearPlateMessage:`Isso limpará a mesa de impressão em {{count}} impressora(s) e pode iniciar trabalhos na fila.`,clearPlateButton:`Limpar todas`},success:`{{action}} concluído em {{count}} impressora(s)`,partial:`{{succeeded}} bem-sucedido(s), {{failed}} falhou/falharam`,noneApplicable:`Nenhuma impressora selecionada está no estado correto para esta ação`,selectByState:`Selecionar por estado`},discovery:{title:`Descobrir Impressoras`,searching:`Procurando...`,scanning:`Escaneando...`,scanProgress:`Escaneando... {{scanned}}/{{total}}`,foundPrinters:`{{count}} impressora(s) encontrada(s)`,noPrintersFound:`Nenhuma impressora encontrada`,noPrintersFoundSubnet:`Nenhuma impressora encontrada na sub-rede especificada.`,noPrintersFoundNetwork:`Nenhuma impressora encontrada na rede.`,allConfigured:`Todas as impressoras descobertas já estão configuradas.`,alreadyAdded:`Já adicionada`,select:`Selecionar`,manualEntry:`Entrada Manual`,addFromCloud:`Adicionar da Nuvem`,subnetToScan:`Sub-rede para escanear`,dockerNote:`Docker detectado. Insira a sub-rede da sua impressora em notação CIDR. Requer network_mode: host no docker-compose.yml.`,scanSubnet:`Escanear Sub-rede para Impressoras`,discoverNetwork:`Descobrir Impressoras na Rede`,scanningSubnet:`Escaneando sub-rede para impressoras Bambu...`,scanningNetwork:`Escaneando rede...`,serialRequired:`Serial necessário`,unknown:`Desconhecido`,failedToStart:`Falha ao iniciar a descoberta`,customSubnetOption:`Sub-rede personalizada...`,customSubnetLabel:`Sub-rede personalizada (CIDR)`,customSubnetNote:`Use uma sub-rede personalizada se sua impressora estiver em uma rede diferente deste servidor. As portas FTP (990) e MQTT (8883) devem estar acessíveis através do limite de roteamento.`},drying:{start:`Iniciar secagem`,stop:`Parar secagem`,temperature:`Temperatura`,duration:`Duração`,hours:`horas`,timeRemaining:`{{time}} restante`,active:`Secagem`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`Secagem não suportada`,powerRequired:`Conecte o adaptador de energia AMS para ativar a secagem`,cannotDryNow:`O AMS não pode iniciar a secagem no momento`,startingDrying:`Iniciando secagem...`,toastCommandSent:`Comando de secagem enviado`,toastStopped:`Secagem interrompida`,toastNotStarted:`A impressora aceitou o comando, mas o AMS não iniciou a secagem. Verifique se o adaptador de energia do AMS está conectado e se a impressora está ociosa.`,screenOnly:`Nesta impressora, a secagem do AMS só pode ser controlada pela tela da própria impressora (limitação da Bambu)`,stoppingDrying:`Parando secagem...`,rotateTray:`Girar o carretel durante a secagem`,rotateUnavailableReason:`Indisponível — um slot deste AMS está carregado em direção ao cabeçote. O carretel está travado pelo tubo de alimentação e não pode girar. Retraia o filamento primeiro.`,startMode:`Horário de início`,modeNow:`Agora`,modeDelay:`Após um atraso`,modeAtTime:`Em um horário`,schedule:`Agendar`,scheduledFor:`Secagem agendada para {{time}}`,scheduledAsap:`Secagem agendada (aguardando a impressora)`,cancelScheduled:`Cancelar secagem agendada`,scheduleFailed:`Falha ao agendar a secagem`,retractFilament:`Recolha o filamento na saída do AMS para iniciar a secagem`,waitingAmsNotFound:`Aguardando a detecção do AMS`,waitingOffline:`Aguardando a impressora ficar online`,waitingPrinterBusy:`Aguardando a impressora ficar livre`,waitingAlreadyDrying:`Aguardando o ciclo de secagem atual terminar`,waitingInterrupted:`Interrompida, será retomada quando a impressora estiver livre`,scheduleFailedReason:`Falha na secagem agendada: {{reason}}`,scheduleFailedUnknown:`Erro desconhecido`,dismissFailed:`Dispensar`},amsBackup:{titleOn:`AMS Filament Backup está LIGADO. Clique para desativar.`,titleOff:`AMS Filament Backup está DESLIGADO. Clique para ativar.`,titleUnknown:`Estado do AMS Filament Backup indisponível nesta impressora.`,toastEnabled:`AMS Filament Backup ativado`,toastDisabled:`AMS Filament Backup desativado`,modalTitle:`AMS Filament Backup`,modalHelp:`Quando o slot ativo termina, a impressora alterna para slots com o mesmo preset e cor nesta ordem.`,modalNoSlots:`Nenhum filamento carregado.`,modalNoPairs:`Sem pares de backup — nenhum par de slots compartilha preset e cor.`,extruderRightShort:`D`,extruderLeftShort:`E`,stateOn:`Ativado`,stateOff:`Desativado`,stateUnknown:`Não suportado nesta impressora`},activeJobSlot:{title:`Este slot é o filamento {{n}} na impressão ativa`,ariaLabel:`Slot de impressão ativa {{n}}`},expectedSlot:{title:`A impressora está aguardando filamento neste slot`,ariaLabel:`Slot de filamento esperado {{n}}`,label:`{{ams}} · Slot {{slot}}`,external:`Bobina externa`},filaments:`Filamentos`,externalSpool:{hide:`Ocultar bobina externa`,show:`Mostrar bobina externa`},openCameraOverlay:`Abrir sobreposição da câmera`,openCameraWindow:`Abrir câmera em nova janela`,firmwareUpdateAvailable:`Atualização de firmware disponível: {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — Atualizado`,firmwareUpdateButton:`Atualizar`,plateDetection:{noPermission:`Você não tem permissão para atualizar impressoras`,enabledClick:`Verificação da placa ativada - Clique para desativar`,disabledClick:`Verificação da placa desativada - Clique para ativar`,manageCalibration:`Gerenciar calibração da detecção da placa`,calibrationRequired:`Calibração necessária`,calibrationInstructions:`Certifique-se de que a placa de construção esteja <strong>completamente vazia</strong>, em seguida clique em Calibrar.`,calibrationDescription:`A calibração captura uma imagem de referência da placa vazia. Verificações futuras compararão com esta referência para detectar objetos.`,calibrationTip:`<strong>Dica:</strong> Você pode armazenar até 5 calibrações para diferentes placas. O sistema usa automaticamente a melhor correspondência ao verificar.`,plateEmpty:`A placa parece vazia`,objectsDetected:`Objetos detectados na placa`,confidence:`Confiança`,difference:`Diferença`,analysisPreview:`Pré-visualização da análise:`,analysisLegend:`Caixa verde = área de detecção, Sobreposição vermelha = diferenças em relação à calibração`,savedReferences:`Referências salvas ({{count}}/{{max}})`,deleteReference:`Excluir referência`,labelPlaceholder:`Etiqueta...`,clickToEdit:`{{label}} - Clique para editar`,clickToAddLabel:`Clique para adicionar etiqueta`},speed:{title:`Velocidade de impressão`,silent:`Silencioso (50%)`,standard:`Padrão (100%)`,sport:`Sport (124%)`,ludicrous:`Ludicrous (166%)`},airduct:{title:`Modo do duto de ar`,cooling:`Resfriamento`,heating:`Aquecimento`},noSdCard:`Sem SD`,door:{open:`Aberta`,closed:`Fechada`},fans:{partCooling:`Ventilador de resfriamento da peça`,auxiliary:`Ventilador auxiliar`,leftAuxiliary:`Ventilador auxiliar esquerdo`,exhaust:`Exaustão`,chamber:`Ventilador da câmara`},clickToViewHmsErrors:`Clique para ver erros do HMS`,aiDetection:{safe:`Seguro`,warning:`Aviso`,failure:`Falha`,idle:`Ocioso`,error:`Não verificando`,unknown:`Iniciando`,tooltipError:`A Detecção de Falhas por IA não está verificando esta impressão: {{reason}} - clique para detalhes`,tooltipUnknown:`Detecção de Falhas por IA: aguardando o primeiro resultado - clique para detalhes`,errorHint:`Esta impressão não está sendo verificada. A detecção será retomada automaticamente assim que o problema abaixo for resolvido.`,tooltip:`Detecção de Falhas por IA: {{status}} (pontuação {{score}}) - clique para detalhes`,tooltipIdle:`Detecção de Falhas por IA ativada - o monitoramento começa na próxima impressão - clique para detalhes`,modalTitle:`Detecção de Falhas por IA - {{name}}`,currentStatus:`Status`,score:`Pontuação`,framesAnalyzed:`Quadros analisados`,idleHint:`Nenhuma impressão está sendo monitorada no momento. O monitoramento começa automaticamente na próxima impressão.`,lastError:`Último erro`,openSettings:`Abrir configurações`},estimatedCompletion:`Tempo estimado de conclusão`,plateNumber:`Placa {{number}}`,slotOptions:`Opções de slot`,amsPopup:{friendlyName:`Nome do AMS`,friendlyNamePlaceholder:`ex.: Nome amigável do AMS`,serialNumber:`Número de série`,firmwareVersion:`Firmware`,save:`Salvar`,clear:`Limpar`,noEditPermission:`Você não tem permissão para renomear unidades AMS`},firmwareModal:{title:`Atualização de Firmware`,titleUpToDate:`Informações do Firmware`,currentVersion:`Atual:`,latestVersion:`Última:`,releaseNotes:`Notas de Lançamento`,checkingPrereqs:`Verificando pré-requisitos...`,sdCardReady:`Cartão SD pronto. Clique abaixo para enviar o firmware.`,uploadedSuccess:`Firmware enviado para o cartão SD!`,applyInstructions:`Para aplicar a atualização na sua impressora:`,step1:`Na tela sensível ao toque da impressora, vá para <strong>Configurações</strong>`,step2:`Navegue até <strong>Firmware</strong>`,step3:`Selecione <strong>Atualizar a partir do cartão SD</strong>`,step4:`A atualização levará de 10 a 20 minutos`,done:`Concluído`,starting:`Iniciando...`,uploadFirmware:`Enviar Firmware`,uploadFailed:`Falha ao iniciar o envio: {{error}}`,uploadedToast:`Firmware enviado! Inicie a atualização na tela da impressora.`,availableVersions:`Versões disponíveis`,usable:`Utilizável`,unavailable:`Indisponível`,installed:`Instalada`,newerBadge:`mais recente`,olderBadge:`mais antiga`,currentBadge:`atual`},accessCodePlaceholder:`Deixe vazio para manter o atual`,roi:{title:`Área de Detecção (ROI)`,xStart:`Início X`,yStart:`Início Y`,width:`Largura`,height:`Altura`,instruction:`Ajuste a área de detecção para focar na placa de construção. A caixa verde na pré-visualização mostra a área atual.`},developerModeWarning:`O modo desenvolvedor LAN não está ativado em: {{names}}. Alguns recursos podem não funcionar.`,howToEnable:`Como ativar`,incompatibleFile:`Este arquivo foi fatiado para {{slicedFor}}, mas esta impressora é uma {{printerModel}}`,dropNotPrintable:`Apenas arquivos .gcode e .gcode.3mf podem ser impressos`,dropToPrint:`Solte para imprimir`,dropToQueue:`Solte para adicionar à fila`},archives:{media:{title:`Vídeos da impressão`,download:`Baixar vídeos da impressão`,searching:`Procurando vídeos na impressora…`,searchFailed:`Não foi possível procurar vídeos na impressora.`,none:`Nenhum timelapse ou trecho da câmera IP foi encontrado para esta impressão.`,attachedTimelapse:`Timelapse anexado`,printerFiles:`Arquivos ainda presentes na impressora`,downloadSelected:`Baixar selecionados`,printerMissing:`A impressora não está mais configurada`,timelapseUnavailable:`Não foi possível ler o diretório de timelapses`,ipcamUnavailable:`Não foi possível ler o diretório da câmera IP`},title:`Arquivos de Impressão`,no3mfBanner:{title:`Algumas impressões recentes não puderam ser arquivadas com miniaturas`,body:`O fatiador não deixou o arquivo .gcode.3mf no cartão SD da impressora, então o Bambuddy não conseguiu obter nem a miniatura nem os metadados do fatiador. Normalmente isso acontece porque "Armazenar arquivos enviados no armazenamento externo" está desligado no fatiador (aba Dispositivo do Bambu Studio / OrcaSlicer).`,docsLink:`Ver passo 4 da instalação`,docsLinkInternalStorage:`Por que isso acontece`,titleInternalStorage:`Algumas impressões recentes ficaram no armazenamento interno da impressora`,bodyInternalStorage:`O Bambu Studio colocou o arquivo fatiado no armazenamento interno da impressora em vez do cartão, então o Bambuddy não tinha nada para ler via FTP. Na série H2, na P2S e na X2D o botão «Imprimir» sempre faz isso: só «Enviar» oferece escolha, e ela também vem com «Cache» por padrão. Essas impressões continuam arquivadas com nome e tempos, apenas sem miniatura nem metadados do fatiador. Para arquivos completos, inicie a impressão pelo Bambuddy ou fatie no OrcaSlicer, ou então no Bambu Studio use «Enviar» com «Externo» e inicie a impressão depois. Todos precisam de um cartão ou pendrive na impressora.`,titleNoExternalStorage:`Algumas impressões recentes não puderam ser arquivadas — sem armazenamento na impressora`,bodyNoExternalStorage:`A impressora não detecta cartão nem pendrive no slot, então o arquivo fatiado não tinha onde ficar e o Bambuddy nada para ler. Insira um e a próxima impressão será arquivada por completo.`,titleInternalHistory:`Algumas impressões recentes começaram a partir de um arquivo que já estava na impressora`,bodyInternalHistory:`Essas impressões saíram da própria biblioteca da impressora: uma reimpressão pela tela dela, um início pelo Handy ou um arquivo enviado antes e impresso depois. O Bambuddy lê os arquivos de impressão por FTP, que só serve o cartão ou o pendrive, enquanto a impressora guarda essa biblioteca em uma área que o FTP não alcança, então não havia nenhum 3MF para ler. Nenhuma opção do fatiador muda isso, porque nada foi enviado para essas impressões. Elas continuam arquivadas com nome e tempos, e «Editar Arquivo» permite preencher à mão o filamento usado. Para um arquivo completo, inicie a impressão pelo Bambuddy ou pelo seu fatiador.`,titleFtpsCooloff:`Algumas impressões recentes não puderam ser arquivadas — a impressora recusou a conexão de arquivos`,bodyFtpsCooloff:`O Bambuddy abriu a porta de transferência de arquivos da impressora (FTPS 990) e a impressora respondeu com algo que não é TLS, então nada pôde ser lido dela. Essas impressões continuam arquivadas com nome e tempos, apenas sem miniatura nem metadados do fatiador. Não é uma configuração do fatiador nem algo que você mudou — os mesmos modelos e firmwares funcionam normalmente em outras instalações, e uma impressora afetada costuma voltar a funcionar sozinha depois. Após uma falha dessas, o Bambuddy pausa as transferências para essa impressora por cinco minutos e volta a buscar o arquivo quando a pausa termina, de modo que um episódio curto se resolve sozinho; um cartão ainda vazio significa que a recusa durou mais que a nova tentativa. Ainda não se sabe o que provoca isso. Se continuar acontecendo, ative o registro de depuração na página Sistema e anexe um pacote de suporte ao seu relato.`,titleFtpTransferFailed:`Algumas impressões recentes não puderam ser arquivadas — a transferência do arquivo esgotou o tempo`,bodyFtpTransferFailed:`O arquivo fatiado estava no cartão da impressora e a impressora chegou a servi-lo, mas a transferência não terminou no tempo permitido. No início da impressão a impressora também cuida da câmera, das mensagens de status e do envio do trabalho, e um 3MF grande nem sempre consegue passar no meio disso. Essas impressões continuam arquivadas com nome e tempos, apenas sem miniatura nem metadados do fatiador. Não é uma configuração do fatiador nem algo que você mudou. O Bambuddy volta a buscar o arquivo três vezes ao longo dos dez minutos seguintes, então a maioria se resolve sozinha; um cartão ainda vazio significa que todas essas tentativas também esgotaram o tempo. Se continuar acontecendo, aumente Tempo limite de conexão em Configurações > Rede > Nova tentativa de FTP.`,dismissLabel:`Dispensar este aviso`},searchPlaceholder:`Pesquisar arquivos...`,filterByPrinter:`Filtrar por impressora`,filterByStatus:`Filtrar por status`,sortBy:`Ordenar por`,sortNewest:`Mais recentes primeiro`,sortOldest:`Mais antigos primeiro`,sortName:`Nome`,sortDuration:`Duração`,sortLargest:`Maiores primeiro`,sortSmallest:`Menores primeiro`,sortSize:`Tamanho`,noArchives:`Nenhum arquivo encontrado`,noArchivesSearch:`Nenhum arquivo corresponde à sua pesquisa`,originalPrintNotVisible:`Impressão original não visível - tente limpar os filtros`,noArchivesYet:`Ainda não há arquivos`,prints:`impressões`,pagination:{showing:`Mostrando`,to:`a`,of:`de`,show:`Mostrar`,page:`Página`,all:`Todos`},loadingArchives:`Carregando arquivos...`,releaseToUpload:`Solte para enviar`,showAll:`Mostrar todos`,showFavoritesOnly:`Mostrar apenas favoritos`,gridView:`Visualização em grade`,listView:`Visualização em lista`,calendarView:`Visualização em calendário`,logView:`Registro de impressão`,manageTags:`Gerenciar etiquetas`,showFailedPrints:`Mostrar impressões falhas`,hideFailedPrints:`Ocultar impressões falhas`,hideDuplicates:`Ocultar duplicados`,viewOriginalPrint:`Clique para visualizar a impressão original (#{{id}})`,printTime:`Tempo de impressão`,filamentUsed:`Filamento usado`,cost:`Custo`,preview:`Pré-visualizar`,deleteArchive:`Excluir arquivo`,deleteConfirm:`Tem certeza de que deseja excluir este arquivo?`,favorite:`Favorito`,unfavorite:`Remover dos favoritos`,viewDetails:`Ver detalhes`,status:{completed:`Concluído`,failed:`Falhou`,stopped:`Parado`},toast:{source3mfAttached:`Arquivo de origem 3MF anexado: {{filename}}`,failedUploadSource3mf:`Falha ao enviar arquivo de origem 3MF`,source3mfRemoved:`Arquivo de origem 3MF removido`,failedRemoveSource3mf:`Falha ao remover arquivo de origem 3MF`,f3dAttached:`F3D anexado: {{filename}}`,failedUploadF3d:`Falha ao enviar F3D`,f3dRemoved:`F3D removido`,failedRemoveF3d:`Falha ao remover F3D`,timelapseAttached:`Timelapse anexado: {{filename}}`,timelapseAlreadyAttached:`Timelapse já anexado`,noMatchingTimelapse:`Nenhum timelapse correspondente encontrado`,failedScanTimelapse:`Falha ao escanear timelapse`,failedAttachTimelapse:`Falha ao anexar timelapse`,timelapseRemoved:`Timelapse removido`,failedRemoveTimelapse:`Falha ao remover timelapse`,timelapseUploaded:`Timelapse enviado: {{filename}}`,failedUploadTimelapse:`Falha ao enviar timelapse`,archiveDeleted:`Arquivo excluído`,failedDeleteArchive:`Falha ao excluir arquivo`,addedToFavorites:`Adicionado aos favoritos`,removedFromFavorites:`Removido dos favoritos`,projectUpdated:`Projeto atualizado`,failedUpdateProject:`Falha ao atualizar projeto`,linkCopied:`Link copiado para a área de transferência`,failedCopyLink:`Falha ao copiar link`,photoDeleted:`Foto excluída`,failedDeletePhoto:`Falha ao excluir foto`,failedDeleteArchives:`Falha ao excluir arquivos`,failedUpdateFavorites:`Falha ao atualizar favoritos`,exportDownloaded:`Exportação baixada`,exportFailed:`Falha na exportação`},menu:{print:`Imprimir`,openInBambuStudio:`Abrir no Slicer`,slice:`Fatiar`,externalLink:`Link externo`,viewOnMakerWorld:`Ver no MakerWorld`,preview3d:`Pré-visualização 3D`,viewTimelapse:`Ver Timelapse`,scanForTimelapse:`Escanear Timelapse`,uploadTimelapse:`Enviar Timelapse`,removeTimelapse:`Remover Timelapse`,downloadSource3mf:`Baixar Source 3MF`,uploadSource3mf:`Enviar Source 3MF`,replaceSource3mf:`Substituir Source 3MF`,removeSource3mf:`Remover Source 3MF`,uploadF3d:`Enviar F3D`,replaceF3d:`Substituir F3D`,downloadF3d:`Baixar F3D`,removeF3d:`Remover F3D`,download:`Baixar`,copyDownloadLink:`Copiar link de download`,qrCode:`Qr Code`,viewPhotos:`Ver fotos`,viewPhotosCount:`Ver fotos ({{count}})`,projectPage:`Página do projeto`,addToFavorites:`Adicionar aos favoritos`,removeFromFavorites:`Remover dos favoritos`,edit:`Editar`,printLog:`Histórico de impressões`,goToProject:`Ir para o projeto: {{name}}`,addToProject:`Adicionar ao projeto`,removeFromProject:`Remover do projeto`,loading:`Carregando...`,noProjectsAvailable:`Nenhum projeto disponível`,searchProjects:`Pesquisar projetos…`,select:`Selecionar`,deselect:`Desmarcar`,delete:`Excluir`},permission:{noReprint:`Você não tem permissão para reimprimir este arquivo`,noAddToQueue:`Você não tem permissão para adicionar à fila`,noUpdateArchives:`Você não tem permissão para atualizar arquivos`,noUploadFiles:`Você não tem permissão para enviar arquivos`,noDownload:`Você não tem permissão para baixar arquivos`,noCopyLink:`Você não tem permissão para copiar links de download`,noDelete:`Você não tem permissão para excluir este arquivo`,noEdit:`Você não tem permissão para editar esta entrada`,noCreate:`Você não tem permissão para criar arquivos`},platePicker:{title:`Selecione a placa para visualizar`,hint:`Este arquivo contém várias placas. Escolha uma para abrir no visualizador GCode.`,plateLabel:`Placa {{index}}`,objectCount:`{{count}} objeto`,objectCount_plural:`{{count}} objetos`,noGcode:`Este arquivo não contém G-code fatiado para visualizar. Abra-o no Bambu Studio para fatiar primeiro.`},card:{previousPlate:`Placa anterior`,nextPlate:`Próxima placa`,plateNumber:`Placa {{index}}`,moreOptions:`Clique com o botão direito para mais opções`,addToFavorites:`Adicionar aos favoritos`,removeFromFavorites:`Remover dos favoritos`,cancelled:`cancelado`,failed:`falha`,duplicate:`duplicado`,duplicateTitle:`Este modelo já foi impresso antes`,openSource3mf:`Abrir source 3MF no Bambu Studio (clique com o botão direito para mais opções)`,downloadF3d:`Baixar arquivo de design do Fusion 360`,viewTimelapse:`Ver timelapse`,viewPhoto:`Ver 1 foto`,viewPhotos:`Ver {{count}} fotos`,openFolder:`Abrir pasta: {{name}}`,slicedFile:`Arquivo fatiado - pronto para imprimir`,sourceFile:`Apenas arquivo fonte - nenhum mapeamento AMS disponível`,gcode:`GCODE`,source:`SOURCE`,project:`Projeto: {{name}}`,runsBadge:`{{count}} impressões`,runsBadgeTitle:`{{count}} impressões no total — {{successful}} bem-sucedidas, {{failed}} com falha. Clique para ver o histórico completo.`,estimated:`Estimado: {{time}}`,actual:`Real: {{time}}`,accuracy:`Precisão: {{percent}}%`,filament:`{{weight}} g`,layer:`{{count}} camada`,layers:`{{count}} camadas`,object:`{{count}} objeto`,objects:`{{count}} objetos`,slicedFor:`Fatiado para {{model}}`,uploadedBy:`Enviado por`,noPermissionReprint:`Você não tem permissão para reimprimir`,noFileForReprint:`Nenhum arquivo 3MF disponível — o arquivo não pôde ser baixado da impressora quando a impressão foi registrada`,slicerAmsMapping:`Mapeamento de AMS salvo ({{printer}})`,slicerAmsMappingTooltip:`A escolha de slot AMS do fatiador foi salva para {{printer}}. Os números de slot só significam algo naquela impressora, portanto uma reimpressão só os reutiliza se voltar a mirar {{printer}}.`,noPermissionEdit:`Você não tem permissão para editar arquivos`,noPermissionDelete:`Você não tem permissão para excluir arquivos`,openInBambuStudio:`Abrir no Bambu Studio`,openInBambuStudioToSlice:`Abrir no Bambu Studio para fatiar`,slice:`Fatiar`,externalLink:`Link externo`,makerWorld:`MakerWorld – {{designer}}`,viewProject:`Ver projeto`,noExternalLink:`Nenhum link externo`,preview3d:`Visualização 3D`,download:`Baixar`,edit:`Editar`,delete:`Excluir`},runLog:{title:`Histórico de impressões`,modalTitle:`Histórico de impressões — {{name}}`,modalTitleFallback:`este arquivo`,empty:`Nenhum evento de impressão registrado para este arquivo ainda.`,col:{date:`Data`,status:`Status`,duration:`Duração`,filament:`Filamento`,cost:`Custo`},status:{completed:`Concluída`,failed:`Falhou`,cancelled:`Cancelada`,stopped:`Interrompida`,skipped:`Ignorada`,printing:`Imprimindo`}},modal:{deleteArchive:`Excluir Arquivo`,deleteConfirm:`Tem certeza de que deseja excluir "{{name}}"? Esta ação não pode ser desfeita.`,deleteButton:`Excluir`,deletePurgeStats:`Remover também esta impressão das Quick Stats (filamento, tempo, custo, energia)`,deleteQueueItemsWarning:`{{count}} item(ns) de fila vinculado(s) a este arquivo também serão removidos.`,deleteBlockedByPrinting:`Não é possível excluir — {{count}} item(ns) de fila estão imprimindo agora. Pare a impressão primeiro e tente novamente.`,removeSource3mf:`Remover Source 3MF`,removeSource3mfConfirm:`Tem certeza de que deseja remover o arquivo source 3MF de "{{name}}"? Isso excluirá o arquivo original do projeto do fatiador.`,removeButton:`Remover`,removeF3d:`Remover F3D`,removeF3dConfirm:`Tem certeza de que deseja remover o arquivo de design do Fusion 360 de "{{name}}"?`,removeTimelapse:`Remover Timelapse`,removeTimelapseConfirm:`Tem certeza de que deseja remover o vídeo timelapse de "{{name}}"?`,timelapse:`{{name}} – Timelapse`,selectTimelapse:`Selecionar Timelapse`,selectTimelapseDesc:`Nenhuma correspondência automática encontrada. Selecione o timelapse para esta impressão:`,deleteArchives:`Excluir Arquivos`,deleteArchivesConfirm:`Tem certeza de que deseja excluir {{count}} arquivo(s)? Esta ação não pode ser desfeita.`,deleteCount:`Excluir {{count}}`},page:{title:`Arquivos`,printsCount:`{{filtered}} de {{total}} impressões`,dropFilesHere:`Solte arquivos .3mf aqui`,releaseToUpload:`Solte para enviar`,only3mfSupported:`Apenas arquivos .3mf são suportados`,close:`Fechar`,selected:`{{count}} selecionado(s)`,selectAll:`Selecionar Todos`,tags:`Etiquetas`,project:`Projeto`,favorite:`Favorito`,delete:`Excluir`,toggledFavorites:`Favoritos alternados para {{count}} arquivo(s)`,failedUpdateFavorites:`Falha ao atualizar favoritos`,archivesDeleted:`{{count}} arquivo(s) excluído(s)`,failedDeleteArchives:`Falha ao excluir arquivos`,photoDeleted:`Foto excluída`,failedDeletePhoto:`Falha ao excluir foto`},list:{name:`Nome`,printer:`Impressora`,date:`Data`,size:`Tamanho`,actions:`Ações`,hasTimelapse:`Possui timelapse`},log:{date:`Data`,printName:`Nome da Impressão`,printer:`Impressora`,user:`Usuário`,status:`Status`,duration:`Duração`,filament:`Filamento`,filamentUsed:`Filamento usado`,cost:`Custo`,energy:`Energia`,energyCost:`Custo de energia`,completedAt:`Concluído`,columns:`Colunas`,sortBy:`Ordenar por {{column}}`,allPrinters:`Todas as Impressoras`,allUsers:`Todos os Usuários`,allStatuses:`Todos os Status`,cancelled:`Cancelado`,skipped:`Ignorado`,dateFrom:`De`,dateTo:`Até`,noEntries:`Nenhuma entrada de registro de impressão encontrada`,showing:`Mostrando {{count}} de {{total}} entradas`,rowsPerPage:`Linhas`,page:`Página`,prev:`Anterior`,next:`Próxima`,clearLog:`Limpar Registro`,clearLogTitle:`Limpar Registro de Impressão`,clearLogConfirm:`Todas as entradas do registro de impressão serão permanentemente excluídas. Arquivos e itens da fila não serão afetados. Esta ação não pode ser desfeita. Tem certeza?`,clearLogButton:`Limpar Tudo`,cleared:`{{count}} entradas do registro de impressão limpas`,clearFailed:`Falha ao limpar o registro de impressão`,deleteEntryTitle:`Excluir entrada do registro de impressão`,deleteEntryConfirm:`Esta entrada será removida do registro e suas contribuições de filamento, tempo e custo desaparecerão das estatísticas rápidas. O arquivo correspondente (se houver) não é afetado. Esta ação não pode ser desfeita.`,entryDeleted:`Entrada do registro de impressão excluída`,entryDeleteFailed:`Falha ao excluir entrada do registro de impressão`,editEntryTitle:`Editar entrada do registro de impressão`,editEntryDescription:`Classifique esta impressão. O widget Análise de falhas agrupa por esses valores, então as atualizações são refletidas nas estatísticas imediatamente.`,entryUpdated:`Entrada do registro atualizada`,entryUpdateFailed:`Falha ao atualizar a entrada do registro`,statuses:{completed:`Concluída`,failed:`Falhou`,stopped:`Parada`,cancelled:`Cancelada`,skipped:`Ignorada`}}},dispatchToast:{untitled:`Trabalho de impressão`,startingPrints:`Iniciando impressões`,progressSummary:`{{complete}}/{{total}} concluídas • Processando: {{processing}}`,expandDetails:`Expandir detalhes do envio`,collapseDetails:`Recolher detalhes do envio`,awaitingPrinter:`Aguardando impressora…`,status:{processing:`Processando`,completed:`Concluída`,failed:`Falhou`},failed:{generic:`Falha no envio`,upload_failed:`Falha ao enviar para a impressora`,start_command_failed:`Impressora rejeitou o comando de início`},dismiss:`Fechar`},pipelineRuns:{title:`Execuções de pipeline`,loading:`Carregando…`,empty:`Nenhuma execução de pipeline ainda.`,filter:{pipeline:`Pipeline`,status:`Status`,target:`Destino`,all:`Todas`,allPipelines:`Todas as pipelines`,allStatus:`Todos os status`,allTargets:`Todos os destinos`,clear:`Limpar filtros`,noMatches:`Nenhuma execução corresponde aos filtros atuais.`},totalCount_one:`{{n}} execução`,totalCount_other:`{{n}} execuções`,copies:`{{n}} cópias`,failedCount:`{{n}} falharam`,copyN:`Cópia {{n}}`,retryFailed:`Repetir falhas`,retryOf:`nova tentativa de #{{n}}`,pagination:`{{start}}–{{end}} de {{total}}`,toast:{cancelled:`Execução cancelada`,cancelFailed:`Cancelamento falhou`,retryStarted:`Nova tentativa iniciada`,retryFailed:`Nova tentativa falhou`,cleared:`{{n}} execuções limpas`,clearFailed:`Falha ao limpar`},clearLog:`Limpar histórico`,clearConfirmTitle:`Limpar histórico?`,clearConfirmBody:`Excluir todas as execuções de pipeline concluídas, falhas, canceladas e com falha parcial? Execuções em andamento são mantidas. Isso não pode ser desfeito.`,clearConfirmAction:`Limpar`,jobStatus:{pending:`pendente`,awaiting_printer:`aguardando impressora`,queued:`na fila`,printing:`imprimindo`,completed:`concluída`,failed:`falhou`,cancelled:`cancelada`},cancelledByUser:`Cancelado pelo usuário`},queue:{filamentShort:{rowBadge:`Filamento insuficiente para a bobina atribuida`,rowTooltip:`O escalonador sinalizou este item. Clique em Play para ver o deficit por slot e decidir se quer imprimir mesmo assim.`,confirmTitle:`Filamento insuficiente`,confirmIntro:`A bobina atribuida nao pode cobrir pelo menos um slot. Imprimir mesmo assim?`,lineItem:`Slot {{slot}}: precisa de {{required}} g, restam {{remaining}} g`,unknown:`desconhecido`,printAnyway:`Imprimir mesmo assim`},slicerAmsMapping:{rowBadge:`Slots AMS salvos para esta impressora`,rowTooltip:`Este arquivo mantém os slots AMS exatos escolhidos pelo fatiador, salvos para a impressora deste item. Uma reimpressão nela pode reutilizar esses carretéis em vez de casar novamente por tipo e cor.`},title:`Fila de Impressão`,subtitle:`Agende e gerencie seus trabalhos de impressão`,editQueueItem:`Editar Item da Fila`,selectAllPlates:`Selecionar todas as {{count}} placas`,deselectAll:`Desmarcar tudo`,printQueued:`Impressão adicionada à fila`,printQueuedWillStartWhenIdle:`Iniciará quando a impressora estiver ociosa`,itemsQueued:`{{count}} itens adicionados à fila`,sending:`Enviando...`,sendingProgress:`Enviando {{current}}/{{total}}...`,adding:`Adicionando...`,addingProgress:`Adicionando {{current}}/{{total}}...`,savingProgress:`Salvando {{current}}/{{total}}...`,clearQueue:`Limpar Fila`,clearHistory:`Limpar Histórico`,emptyQueue:`Fila vazia`,position:`Posição`,scheduledTime:`Hora Agendada`,moveUp:`Mover para Cima`,moveDown:`Mover para Baixo`,startNow:`Iniciar Agora`,printingInProgress:`Impressão em andamento...`,viewArchive:`Ver Arquivo`,viewInFileManager:`Ver no Gerenciador de Arquivos`,itemCount:`{{count}} item`,itemCount_plural:`{{count}} itens`,dragToReorder:`Arraste para reordenar (apenas ASAP)`,reorderHint:`A posição afeta apenas itens ASAP. Itens agendados são executados no horário definido.`,sjf:{label:`SJF`,tooltip:`Trabalho mais curto primeiro — o agendador prioriza impressões mais curtas`},addedBy:`Adicionado por {{name}}`,nextInQueue:`Próximo na fila`,clearPlateSuccess:`Placa limpa — pronta para a próxima impressão`,plateNumber:`Placa {{index}}`,quantity:`Quantidade`,quantityHint:`Cria {{count}} itens na fila`,plateQuantityLabel:`Impressões de {{plate}}`,plateQuantityTotal_one:`{{count}} impressão no total`,plateQuantityTotal_other:`{{count}} impressões no total`,batchOrders:{title:`Pedidos em lote`,emptyTitle:`Nenhum pedido em lote`,emptyDescription:`Coloque na fila um arquivo com várias mesas, ou mais de uma cópia de uma mesa, e o pedido aparece aqui com o progresso.`,filter:{active:`Ativos`,completed:`Concluídos`,cancelled:`Cancelados`,all:`Todos`},status:{active:`Ativo`,completed:`Concluído`,cancelled:`Cancelado`},noTargets:`Apenas agrupamento`,noTargetsHint:`Criado antes das quantidades por mesa, então acompanha as impressões enfileiradas em vez de uma meta.`,dispatchRemaining:`Enfileirar {{count}} restantes`,dispatchPlate:`Enfileirar restantes`,strandedPlate:`Nada de onde copiar as configurações`,strandedNotice:`Não é possível enfileirar {{runs}} das {{owed}} impressões ainda devidas: essa placa não tem mais nenhuma impressão na fila ou concluída de onde copiar as configurações. Enfileire a placa uma vez a partir do arquivo ou cancele o pedido.`,dispatched:`Impressões restantes enfileiradas para {{name}}`,plateProgress:`{{completed}} de {{target}} prontas`,remaining:`{{count}} ainda devidas`,failed:`{{count}} falharam`,printing:`{{count}} imprimindo`,wholeFile:`Arquivo inteiro`,due:`Vence {{date}}`,costSoFar:`{{amount}} até agora`,costRemaining:`({{amount}} a gastar)`},activeBatches:`Lotes ativos`,batchProgress:`{{completed}} de {{total}} concluídos`,cancelBatch:`Cancelar restantes`,batchCancelled:`Itens restantes do lote cancelados`,cancelBatchConfirmTitle:`Cancelar lote`,cancelBatchConfirmMessage:`Encerrar este pedido? As impressões ainda na fila são canceladas e ele para de cobrar o que não produziu.`,batch:{defaultName:`Lote`,label:`{{count}} item`,label_plural:`{{count}} itens`,pendingCount:`{{count}} pendente`,pendingCount_plural:`{{count}} pendentes`,expand:`Expandir lote`,collapse:`Recolher lote`,groupAsBatch:`Agrupar como lote…`,groupAsBatchDescription:`Combine os {{count}} itens selecionados em um único lote recolhível.`,nameLabel:`Nome do lote`,namePlaceholder:`ex. Presentes de sexta`,create:`Criar lote`,ungroup:`Desagrupar`,ungroupConfirmTitle:`Desagrupar lote?`,ungroupConfirmMessage:`Os itens permanecerão na fila mas não estarão mais agrupados.`,dragGroup:`Arrastar grupo`},tabs:{batches:`Lotes`,queue:`Fila`,history:`Histórico`,timeline:`Linha do tempo`,pipelines:`Processos`},layout:{flatList:`Lista`,byPrinter:`Por impressora`,groupByPrinter:`Agrupar por impressora`},history:{emptyTitle:`Sem histórico ainda`,emptyDescription:`Impressões concluídas, canceladas e com falha aparecerão aqui.`,showMore:`Mostrar mais`,showingCount:`Mostrando {{shown}} de {{total}}`},dragGhost:{multiCount:`{{count}} itens`,batch:`{{name}} ({{count}} cópia)`,batch_plural:`{{name}} ({{count}} cópias)`},sections:{currentlyPrinting:`Imprimindo Atualmente`,queued:`Na Fila`,history:`Histórico`},status:{pending:`Pendente`,waiting:`Aguardando`,printing:`Imprimindo`,paused:`Pausado`,completed:`Concluído`,failed:`Falhou`,skipped:`Ignorado`,cancelled:`Cancelado`},summary:{printing:`Imprimindo`,queued:`Na Fila`,totalTime:`Tempo Total da Fila`,totalWeight:`Peso Total da Fila`,history:`Histórico`},filter:{allPrinters:`Todas as Impressoras`,unassigned:`Não Atribuído`,allStatus:`Todos os Status`,allLocations:`Todos os Locais`,any:`Qualquer`},sort:{byPosition:`Ordenar por Posição`,byName:`Ordenar por Nome`,byPrinter:`Ordenar por Impressora`,bySchedule:`Ordenar por Agendamento`,byDate:`Ordenar por Data`,ascendingOldest:`Crescente (mais antigo primeiro)`,descendingNewest:`Decrescente (mais recente primeiro)`},badges:{staged:`Preparado (início manual)`,requiresPrevious:`Requer sucesso anterior`,autoPowerOff:`Desligamento automático`,gcodeInjection:`G-code`},empty:{title:`Nenhuma impressão agendada`,description:`Agende uma impressão a partir da página de Arquivos usando a opção "Agendar" no menu de contexto, ou arraste e solte arquivos para começar.`},time:{etaIfStartedNow:`Horário de conclusão se este trabalho começasse agora`,whenFree:`Quando uma impressora estiver livre`,overdue:`Atrasado`,now:`Agora`,lessThanMinute:`Em menos de um minuto`,inMinutes:`Em {{count}} min`,inHours:`Em {{count}} horas`},actions:{startPrint:`Iniciar Impressão`,stopPrint:`Parar Impressão`,requeue:`Reenfileirar`},bulkEdit:{title:`Editar {{count}} Item`,title_plural:`Editar {{count}} Itens`,description:`Apenas as configurações alteradas serão aplicadas aos itens selecionados.`,printer:`Impressora`,noChange:`— Sem alterações —`,queueOptions:`Opções de Fila`,staged:`Preparado (início manual)`,autoPowerOff:`Desligamento automático após impressão`,requirePrevious:`Requer sucesso anterior`,gcodeInjection:`Injetar G-code`,printOptions:`Opções de Impressão`,bedLevelling:`Nivelamento da Mesa`,flowCalibration:`Calibração de Fluxo`,vibrationCalibration:`Calibração de Vibração`,layerInspection:`Inspeção da Primeira Camada`,timelapse:`Timelapse`,useAms:`Usar AMS`,nozzleOffsetCali:`Calibração de offset dos bicos`,applyChanges:`Aplicar Alterações`,selectAll:`Selecionar Todos`,deselectAll:`Desmarcar Todos`,selected:`{{count}} selecionado(s)`,editSelected:`Editar Selecionados`,cancelSelected:`Cancelar Selecionados`},confirm:{cancelTitle:`Cancelar Impressão Agendada`,cancelMessage:`Tem certeza de que deseja cancelar "{{name}}"?`,stopTitle:`Parar Impressão`,stopMessage:`Tem certeza de que deseja parar a impressão atual "{{name}}"? Isso cancelará o trabalho de impressão na impressora.`,removeTitle:`Remover do Histórico`,removeMessage:`Tem certeza de que deseja remover "{{name}}" do histórico da fila?`,clearHistoryTitle:`Limpar Histórico`,clearHistoryMessage:`Tem certeza de que deseja remover todos os {{count}} itens do histórico?`,cancelButton:`Cancelar Impressão`,stopButton:`Parar Impressão`,thisPrint:`esta impressão`,thisItem:`este item`},toast:{cancelled:`Item da fila cancelado`,cancelFailed:`Falha ao cancelar item`,removed:`Item da fila removido`,keptForOrder:`Cancelado em vez de removido: é a única impressão de onde o pedido pode reenfileirar esta placa`,historyKeptForOrders:`{{kept}} mantidas porque pedidos ainda precisam delas.`,removeFailed:`Falha ao remover item`,stopped:`Impressão parada`,stopFailed:`Falha ao parar impressão`,released:`Impressão liberada para a fila`,startFailed:`Falha ao iniciar impressão`,reorderFailed:`Falha ao reordenar fila`,historyCleared:`Limpar {{count}} item(s) do histórico`,clearHistoryFailed:`Falha ao limpar histórico`,updateFailed:`Falha ao atualizar itens`,bulkCancelled:`Cancelado {{count}} item(s)`,bulkCancelFailed:`Falha ao cancelar itens`,batchCreated:`Lote "{{name}}" criado`,batchCreateFailed:`Falha ao criar o lote`,batchUngrouped:`{{count}} item(ns) desagrupado(s)`,batchUngroupFailed:`Falha ao desagrupar o lote`,resumedAfterFailure:`Fila retomada — {{restored}} trabalho(s) restaurado(s) para pendente`,resumeAfterFailureFailed:`Falha ao retomar a fila`},resumeAfterFailure:{banner:`{{printer}} está bloqueada por uma falha de impressão anterior — {{count}} trabalho(s) ignorado(s)`,bannerHint:`Resolva o problema da impressora e retome para restaurar os trabalhos ignorados e remover o bloqueio.`,button:`Retomar após falha`,confirmTitle:`Retomar a fila após a falha?`,confirmMessage:`Restaurar {{count}} trabalho(s) ignorado(s) em {{printer}} para pendente e remover o bloqueio da impressão anterior. Verifique se a impressora está pronta antes de continuar.`},timeline:{listView:`Lista`,timelineView:`Linha do tempo`,unassigned:`Não atribuído`,noData:`Nenhuma impressão agendada para este dia`,nothingCommitted:`Sem programações confirmadas nesta janela. Itens preparados, itens em espera e trabalhos ASAP em impressoras ociosas não são mostrados — defina um horário agendado ou libere um item preparado para vê-lo aqui.`,allDoneBy:`Todas as impressões concluídas até {{time}}`,staged:`Preparado`,filterAll:`Mostrar tudo`,filterPrinting:`Imprimindo`,filterQueued:`Na fila`,time:{anyMoment:`a qualquer momento`,minutesLeft:`{{minutes}}m restantes`,hoursLeft:`{{hours}}h restantes`,hoursMinutesLeft:`{{hours}}h {{minutes}}m restantes`},day:{previous:`Dia anterior`,next:`Próximo dia`,today:`Hoje`},window:{back12h:`Voltar 12 horas`,forward12h:`Avançar 12 horas`,now:`Agora`},printerColumnHeader:`Impressora`},permissions:{noStopPrint:`Você não tem permissão para parar impressões`,noStartPrint:`Você não tem permissão para iniciar impressões`,noEdit:`Você não tem permissão para editar este item da fila`,noCancel:`Você não tem permissão para cancelar este item da fila`,noRequeue:`Você não tem permissão para reenfileirar itens`,noRemove:`Você não tem permissão para remover este item da fila`,noClearHistory:`Você não tem permissão para limpar todo o histórico`,noEditItems:`Você não tem permissão para editar itens da fila`,noCancelItems:`Você não tem permissão para cancelar itens da fila`}},stats:{title:`Estatísticas`,subtitle:`Arraste os widgets para reorganizar. Clique no ícone de olho para ocultar.`,overview:`Visão Geral`,totalPrints:`Total de Impressões`,successRate:`Taxa de Sucesso`,totalPrintTime:`Tempo Total de Impressão`,printTime:`Tempo de Impressão`,totalFilament:`Filamento Total Utilizado`,filamentUsed:`Filamento Utilizado`,filamentCost:`Custo do Filamento`,totalCost:`Custo Total`,energyUsed:`Energia Utilizada`,energyCost:`Custo da Energia`,energyWarmingUpTooltip:`O monitoramento de energia ainda está coletando snapshots por hora. Os totais por período ficarão precisos quando houver pelo menos um snapshot antes do intervalo selecionado. Valores iniciais podem ser subestimados.`,averagePrintTime:`Tempo Médio de Impressão`,printsPerDay:`Impressões por Dia`,byPrinter:`Por Impressora`,printsByPrinter:`Impressões por Impressora`,byMaterial:`Por Material`,byMonth:`Por Mês`,last7Days:`Últimos 7 Dias`,last30Days:`Últimos 30 Dias`,last90Days:`Últimos 90 Dias`,allTime:`Todo o Tempo`,quickStats:`Estatísticas Rápidas`,printActivity:`Atividade de Impressão`,filamentTypes:`Tipos de Filamento`,filamentTrends:`Tendências de Filamento`,failureAnalysis:`Análise de Falhas`,timeAccuracy:`Precisão do Tempo`,successful:`Bem-sucedido:`,failed:`Falhou:`,cancelled:`Cancelado:`,perfectEstimate:`100% = estimativa perfeita`,noTimeAccuracyData:`Nenhum dado de precisão de tempo disponível`,noFilamentData:`Nenhum dado de filamento disponível`,noPrinterData:`Nenhum dado de impressora disponível`,noPrintData:`Nenhum dado de impressão disponível`,noPrintDataLast30Days:`Nenhum dado de impressão nos últimos 30 dias`,failureReasons:`Razões de Falha`,topFailureReasons:`Principais Razões de Falha`,failedPrintsCount:`{{failed}} / {{total}} impressões falharam`,lastWeekRate:`Última semana: {{rate}}%`,resetLayout:`Redefinir Layout`,recalculateCosts:`Recalcular Custos`,recalculateCostsHint:`Recalcular todos os custos do arquivo usando os preços atuais do filamento`,exportStats:`Exportar Estatísticas`,exportAsCsv:`Exportar como CSV`,exportAsExcel:`Exportar como Excel`,hiddenCount:`{{count}} Oculto`,exportDownloaded:`Exportação baixada`,exportFailed:`Falha na exportação`,layoutReset:`Layout redefinido`,recalculatedCosts:`Custos recalculados para {{count}} arquivos`,recalculateFailed:`Falha ao recalcular custos`,loadingStats:`Carregando estatísticas...`,noPermissionResetLayout:`Você não tem permissão para redefinir o layout`,noPermissionRecalculate:`Você não tem permissão para recalcular custos`,noPrintDataInRange:`Sem dados no período selecionado`,periodFilament:`Filamento usado`,periodCost:`Custo`,avgPerPrint:`Média por impressão`,usageOverTime:`Uso ao longo do tempo`,energyOverTime:`Energia ao longo do tempo`,filamentByWeight:`Peso`,printDuration:`Duração da impressão`,printerUtilization:`Utilização da impressora`,filamentSuccess:`Sucesso por material`,printHabits:`Hábitos de impressão`,printTimeOfDay:`Horário de impressão`,colorDistribution:`Distribuição de cores`,noColorData:`Nenhum dado de cor disponível`,records:`Recordes`,longestPrint:`Impressão mais longa`,heaviestPrint:`Impressão mais pesada`,mostExpensivePrint:`Mais cara`,busiestDay:`Dia mais movimentado`,successStreak:`Sequência de sucesso`,streakPrint:`impressão consecutiva`,streakPrints:`{{count}} impressões consecutivas`,printerStats:`Estatísticas da impressora`,hours:`horas`,avgPrints:`Méd. impressões`,noArchiveData:`Nenhum dado de impressão disponível`,filamentByTime:`Tempo`,avgWeight:`Méd. peso`,avgTime:`Méd. tempo`,filamentByPrints:`Impressões`,timeframe:{today:`Hoje`,"this-week":`Esta semana`,"this-month":`Este mês`,"last-7":`Últimos 7 dias`,"last-30":`Últimos 30 dias`,"last-90":`Últimos 90 dias`,"this-year":`Este ano`,"all-time":`Todo o período`,custom:`Personalizado`,from:`De`,to:`Até`},allUsers:`Todos os Usuários`,noUser:`Sem Usuário (Sistema)`,filterByUser:`Filtrar por Usuário`},maintenance:{title:`Manutenção`,overview:`Visão Geral`,allOk:`Todas as manutenções estão em dia`,dueCount:`{{count}} item pendente`,dueCount_plural:`{{count}} itens pendentes`,warningCount:`{{count}} aviso`,warningCount_plural:`{{count}} avisos`,totalPrintTime:`Tempo Total de Impressão`,nextMaintenance:`Próxima Manutenção`,nothingDue:`Nada pendente`,tasks:`Tarefas`,lastPerformed:`Última execução`,interval:`Intervalo`,hoursRemaining:`{{hours}}h restantes`,hoursOverdue:`{{hours}}h atrasadas`,markDone:`Marcar como Concluída`,performMaintenance:`Realizar Manutenção`,history:`Histórico`,noHistory:`Nenhum histórico de manutenção`,editPrintHours:`Editar Horas de Impressão`,currentHours:`Horas Atuais`,statusTab:`Status`,settingsTab:`Configurações`,overdueCount:`{{count}} atrasado`,dueSoonCount:`{{count}} prestes a vencer`,dueSoon:`Prestes a vencer`,allGood:`Tudo certo`,overdueBy:`Atrasado por {{duration}}`,dueIn:`Vence em {{duration}}`,timeLeft:`{{duration}} restantes`,day:`1 dia`,days:`{{count}} dias`,week:`1 semana`,weeks:`{{count}} semanas`,month:`1 mês`,months:`{{count}} meses`,year:`1 ano`,maintenanceTypes:`Tipos de Manutenção`,maintenanceTypesDescription:`Tipos de sistema e suas tarefas de manutenção personalizadas`,addCustomType:`Adicionar Tipo Personalizado`,restoreDefaults:`Restaurar Tarefas Padrão`,intervalType:`Tipo de Intervalo`,intervalValue:`Intervalo ({{type}})`,icon:`Ícone`,documentationLink:`Link da Documentação (opcional)`,assignToPrinters:`Atribuir a Impressoras`,selectAtLeastOnePrinter:`Selecione pelo menos uma impressora`,addType:`Adicionar Tipo`,custom:`Personalizado`,printHours:`Horas de Impressão`,calendarDays:`Dias de Calendário`,exampleName:`ex., Substituir Filtro HEPA`,viewDocumentation:`Ver documentação`,timeBasedInterval:`Intervalo baseado em tempo`,intervalOverrides:`Substituições de Intervalo`,intervalOverridesDescription:`Personalize os intervalos para impressoras específicas`,assignedToPrinters:`Atribuído a impressoras:`,noPrintersAssigned:`Nenhuma impressora atribuída`,addPrinterShort:`Adicionar:`,printersAssignedClick:`{{count}} impressora(s) atribuída(s) - clique para gerenciar`,removeFromPrinter:`Remover desta impressora`,types:{lubricateCarbonRods:`Lubricar Barras de Carbono`,lubricateRails:`Lubricar Trilhos Lineares`,cleanNozzle:`Limpar Bico/Hotend`,checkBelts:`Verificar Tensão das Correias`,cleanBuildPlate:`Limpar Plataforma de Impressão`,checkExtruder:`Verificar Engrenagens do Extrusor`,checkCooling:`Verificar Ventiladores de Resfriamento`,generalInspection:`Inspeção Geral`,cleanCarbonRods:`Limpar Barras de Carbono`,lubricateSteelRods:`Lubrificar Barras de Aço`,cleanSteelRods:`Limpar Barras de Aço`,cleanLinearRails:`Limpar Trilhos Lineares`,checkPtfeTube:`Verificar Tubo PTFE`,replaceHepaFilter:`Substituir Filtro HEPA`,replaceCarbonFilter:`Substituir Filtro de Carbono`,lubricateLeftNozzleRail:`Lubrificar Trilho do Bico Esquerdo`},maintenanceComplete:`Manutenção marcada como concluída`,typeUpdated:`Tipo de manutenção atualizado`,typeDeleted:`Tipo de manutenção excluído`,defaultsRestored:`Restauradas {{count}} tarefa(s) padrão`,printHoursUpdated:`Horas de impressão atualizadas`,printerAssigned:`Impressora atribuída`,printerRemoved:`Impressora removida`,deleteTypeConfirm:`Excluir "{{name}}"?`,deleteSystemTypeTitle:`Excluir tarefa de manutenção padrão?`,deleteSystemTypeMessage:`Tem certeza de que deseja excluir a tarefa de manutenção padrão "{{name}}"?`,noPermissionUpdate:`Você não tem permissão para atualizar itens de manutenção`,noPermissionPerform:`Você não tem permissão para realizar manutenção`,noPermissionEditTypes:`Você não tem permissão para editar tipos de manutenção`,noPermissionDeleteTypes:`Você não tem permissão para excluir tipos de manutenção`,noPermissionEditHours:`Você não tem permissão para editar horas de impressão`,noPermissionRemovePrinter:`Você não tem permissão para remover atribuições de impressora`,noPermissionAssignPrinter:`Você não tem permissão para atribuir impressoras`,noPermissionEditIntervals:`Você não tem permissão para editar intervalos`,configureSettings:`Configure tipos de manutenção e intervalos`},settings:{sliceEngine:`Motor de fatiamento`,sliceEngineSidecar:`Sidecar do servidor`,sliceEngineSidecarHint:`O fatiamento roda no servidor, no contêiner sidecar do fatiador.`,sliceEngineBrowser:`No navegador`,sliceEngineBrowserHint:`O fatiamento roda neste dispositivo, sem envolver o servidor.`,title:`Configurações`,general:`Geral`,tabs:{general:`Geral`,smartPlugs:`Tomadas Inteligentes`,sensors:`Sensores`,notifications:`Notificações`,queue:`Fluxo`,queueDispatch:`Fila e Dispatch`,queuePipelines:`Pipelines`,filament:`Filamento`,network:`Rede`,apiKeys:`Chaves API`,virtualPrinter:`Impressora Virtual`,failureDetection:`Detecção de Falhas`,users:`Autenticação`,backup:`Backup`,emailAuth:`Autenticação por Email`,ldap:`LDAP`,twoFa:`Autenticação 2FA`,oidc:`SSO / OIDC`,security:`Segurança`,spoolbuddy:`SpoolBuddy`},ldap:{title:`Autenticação LDAP`,enabledDesc:`A autenticação LDAP está ativada`,disabledDesc:`A autenticação LDAP está desativada`,disabledHint:`Configure e salve as configurações LDAP abaixo, depois ative.`,enabled:`Autenticação LDAP ativada`,disabled:`Autenticação LDAP desativada`,feature1:`Usuários podem fazer login com credenciais LDAP`,feature2:`A conta de administrador local permanece como fallback`,feature3:`Grupos LDAP são mapeados para grupos BamBuddy no login`,serverConfig:`Configuração do Servidor LDAP`,serverUrl:`URL do servidor`,serverUrlHint:`Use ldap:// para padrão ou ldaps:// para conexões SSL`,security:`Segurança`,securityHint:`StartTLS atualiza uma conexão simples para TLS. LDAPS usa TLS desde o início.`,bindDn:`Bind DN (conta de serviço)`,bindPassword:`Senha Bind`,searchBase:`Base DN de pesquisa`,userFilter:`Filtro de pesquisa de usuário`,userFilterHint:`{username} é substituído pelo nome de usuário. Use (uid={username}) para OpenLDAP.`,advanced:`Avançado`,autoProvision:`Provisionamento automático de usuários`,autoProvisionHint:`Criar automaticamente uma conta BamBuddy no primeiro login LDAP`,defaultGroup:`Grupo padrão`,defaultGroupNone:`— Nenhum (sem fallback) —`,defaultGroupHint:`Grupo de fallback atribuído quando um usuário LDAP se autentica mas não está em nenhum grupo LDAP mapeado. Deixe vazio para manter usuários não mapeados sem permissões.`,groupMapping:`Mapeamento de grupos (JSON)`,groupMappingHint:`Mapear DNs de grupos LDAP para grupos BamBuddy. Grupos disponíveis: `,testConnection:`Testar conexão`,settingsSaved:`Configurações LDAP salvas`,errors:{serverRequired:`URL do servidor LDAP é obrigatória`,searchBaseRequired:`Base DN de pesquisa é obrigatória`,enableAuthFirst:`Ative a autenticação primeiro`,configureLdapFirst:`Salve as configurações LDAP primeiro`}},email:{smtpSettings:`Configuração SMTP`,smtpHost:`Servidor SMTP`,smtpPort:`Porta SMTP`,security:`Segurança`,authentication:`Autenticação`,username:`Nome de Usuário`,password:`Senha`,fromEmail:`Email de Remetente`,fromName:`Nome de Remetente`,testConnection:`Testar Conexão SMTP`,testRecipient:`Email de Teste`,sendTest:`Enviar Email de Teste`,sending:`Enviando...`,save:`Salvar Configurações`,saving:`Salvando...`,advancedAuth:`Autenticação Avançada`,advancedAuthEnabled:`Autenticação Avançada está habilitada`,advancedAuthEnabledDesc:`Recursos de gerenciamento de usuários baseados em email estão ativos. Novos usuários receberão senhas geradas automaticamente por email, e os usuários podem redefinir suas senhas através do recurso de esqueci minha senha.`,advancedAuthDisabled:`Autenticação Avançada está desabilitada`,advancedAuthDisabledDesc:`Habilite a autenticação avançada para ativar recursos baseados em email para gerenciamento de usuários.`,enable:`Habilitar`,disable:`Desabilitar`,feature1:`Senhas são geradas automaticamente e enviadas por email para novos usuários`,feature2:`Usuários podem fazer login com nome de usuário ou email`,feature3:`Recurso de esqueci minha senha está disponível`,feature4:`Administradores podem redefinir senhas de usuários via email`,errors:{requiredFields:`Por favor, preencha todos os campos obrigatórios`,usernameRequired:`Nome de usuário é obrigatório quando a autenticação está habilitada`,enterTestEmail:`Por favor, insira um endereço de email de teste`,smtpServerAndEmail:`Por favor, preencha o servidor SMTP e o email de remetente antes de testar`,usernamePasswordRequired:`Nome de usuário e senha são obrigatórios quando a autenticação está habilitada`,configureSmtpFirst:`Por favor, configure e teste as configurações SMTP primeiro`,enableAuthFirst:`Por favor, habilite a autenticação primeiro para usar os recursos baseados em e-mail.`},success:{settingsSaved:`Configurações SMTP salvas com sucesso`},securityOptions:{starttls:`STARTTLS (Porta 587)`,ssl:`SSL/TLS (Porta 465)`,none:`Nenhuma (Porta 25)`},authOptions:{enabled:`Habilitado`,disabled:`Desabilitado`}},appearance:`Aparência`,notifications:`Notificações`,smartPlugs:`Tomadas Inteligentes`,spoolman:`Spoolman`,updates:`Atualizações`,language:`Idioma`,languageDescription:`Selecione seu idioma preferido`,theme:`Tema`,themeLight:`Claro`,themeDark:`Escuro`,themeSystem:`Sistema`,defaultView:`Visualização Padrão`,defaultViewDescription:`Página a ser exibida ao abrir o aplicativo`,checkForUpdates:`Verificar Atualizações`,autoUpdate:`Atualização Automática`,currentVersion:`Versão Atual`,latestVersion:`Última Versão`,upToDate:`Você está atualizado`,updateAvailable:`Atualização disponível`,notificationLanguage:`Idioma das Notificações`,notificationLanguageDescription:`Idioma para notificações push`,bedCooledThreshold:`Limite de Resfriamento da Cama`,bedCooledThresholdDescription:`Temperatura abaixo da qual a cama é considerada resfriada após uma impressão`,userNotificationsEnabled:`Notificações do Usuário`,userNotificationsEnabledDescription:`Ativa o menu de notificações do usuário e notificações por e-mail para eventos de impressão. Requer Autenticação Avançada.`,userNotificationsDisabledHint:`Ative a Autenticação Avançada para usar as notificações do usuário.`,notificationProviders:`Provedores de Notificação`,addProvider:`Adicionar Provedor`,editProvider:`Editar Provedor`,providerType:`Tipo de Provedor`,testNotification:`Testar Notificação`,testSuccess:`Notificação de teste enviada com sucesso`,testFailed:`Falha ao enviar notificação de teste`,quietHours:`Horas de Silêncio`,quietHoursDescription:`Não perturbe durante essas horas`,quietHoursStart:`Início`,quietHoursEnd:`Fim`,events:{title:`Eventos de Notificação`,printStart:`Impressão Iniciada`,printComplete:`Impressão Concluída`,printFailed:`Falha na Impressão`,printStopped:`Impressão Interrompida`,printProgress:`Marcos de Progresso`,printProgressDescription:`Notificar em 25%, 50%, 75%`,printerOffline:`Impressora Offline`,printerError:`Erro na Impressora`,filamentLow:`Filamento Baixo`,maintenanceDue:`Manutenção Pendente`,maintenanceDueDescription:`Notificar quando a manutenção for necessária`},smartPlug:{title:`Tomadas Inteligentes`,add:`Adicionar Tomada Inteligente`,edit:`Editar Tomada Inteligente`,name:`Nome`,ipAddress:`Endereço IP`,linkedPrinter:`Impressora Vinculada`,autoOn:`Ligar Automaticamente`,autoOnDescription:`Ligar quando a impressão começar`,autoOff:`Desligar Automaticamente`,autoOffDescription:`Desligar após a conclusão da impressão`,offDelay:`Atraso para Desligar`,offDelayMinutes:`Minutos após a impressão`,offDelayTemp:`Quando o bico estiver abaixo da temperatura`,currentState:`Estado Atual`,turnOn:`Ligar`,turnOff:`Desligar`},filamentTracking:`Rastreamento de Filamento`,filamentTrackingDesc:`Escolha como rastrear seus rolos de filamento. Você pode usar o inventário interno ou conectar a um servidor Spoolman externo.`,autoAddUnknownRfid:`Adicionar automaticamente carretéis RFID desconhecidos`,autoAddUnknownRfidDesc:`Cria automaticamente uma entrada de inventário quando um carretel com tag RFID desconhecido é detectado. Desligue se você pré-registra novos carretéis manualmente para evitar duplicatas.`,filamentChecks:`Verificações de filamento`,disableFilamentWarnings:`Desativar avisos de filamento`,disableFilamentWarningsDesc:`Não mostrar avisos sobre filamento insuficiente ao imprimir ou adicionar à fila`,preferLowestFilament:`Preferir filamento com menor resto`,preferLowestFilamentDesc:`Quando vários carretéis correspondem, usar o com menos filamento restante`,preferLowestFilamentBackupNote:`Só tem efeito quando o AMS Filament Backup está habilitado na impressora — caso contrário, a impressora não pode trocar para um segundo carretel quando o escolhido acabar.`,trackingModeBuiltIn:`Inventário Interno`,trackingModeBuiltInDesc:`Correspondência automática de RFID e rastreamento de uso incluídos`,trackingModeSpoolmanDesc:`Servidor de gerenciamento de filamento externo`,builtInFeatureRfid:`Detecta automaticamente rolos RFID da Bambu Lab no AMS`,builtInFeatureUsage:`Rastreia o consumo de filamento por impressão`,builtInFeatureCatalog:`Gerencia rolos, cores e perfis de fator K`,builtInFeatureThirdParty:`Rolos de terceiros podem ser atribuídos aos rolos do inventário`,amsSyncButton:`Sincronizar Pesos do AMS`,amsSyncTitle:`Sincronizar Pesos dos Rolos do AMS`,amsSyncMessage:`Isso substituirá todos os pesos dos rolos do inventário pelos valores atuais de % restante do AMS das impressoras conectadas. Use isso para recuperar dados de peso corrompidos. As impressoras devem estar online.`,amsSyncing:`Sincronizando...`,amsSyncSuccess:`{{synced}} rolo(s) sincronizado(s), {{skipped}} ignorado(s)`,amsSyncError:`Falha ao sincronizar pesos do AMS`,spoolmanAmsSyncButton:`Sincronizar pesos do Spoolman pelo AMS`,spoolmanAmsSyncTitle:`Sincronizar pesos dos rolos Spoolman pelo AMS`,spoolmanAmsSyncMessage:`Isso atualizará os pesos de todos os rolos Spoolman com base nos valores atuais de % restante do AMS das impressoras conectadas. As impressoras devem estar online.`,spoolmanAmsSyncing:`Sincronizando...`,spoolmanAmsSyncSuccess:`{{synced}} rolo(s) Spoolman sincronizado(s), {{skipped}} ignorado(s)`,spoolmanAmsSyncError:`Falha ao sincronizar pesos do Spoolman pelo AMS`,spoolmanAmsSyncErrorUnreachable:`Falha na sincronização (Spoolman inacessível)`,spoolmanAmsSyncErrorNotConfigured:`Falha na sincronização (Spoolman não configurado)`,spoolmanNotConfigured:`Spoolman não configurado`,spoolmanFilamentCatalogTitle:`Catálogo de filamentos Spoolman`,spoolmanFilamentCatalogDesc:`Nomes de filamentos e pesos tara da sua instância Spoolman. Nome e peso do carretel são editáveis aqui; todas as outras propriedades são gerenciadas diretamente no Spoolman.`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`URL do seu servidor Spoolman (por exemplo, http://localhost:7912)`,spoolmanConnected:`Conectado`,spoolmanDisconnected:`Desconectado`,status:`Status`,connect:`Conectar`,disconnect:`Desconectar`,howSyncWorks:`Como a Sincronização Funciona`,syncInfoRfidOnly:`Apenas rolos oficiais da Bambu Lab com RFID são sincronizados`,syncInfoAutoCreate:`Novos rolos são criados automaticamente no Spoolman na primeira sincronização`,syncInfoThirdPartySkipped:`Rolos não oficiais da Bambu Lab (terceiros, reabastecidos) são ignorados`,linkingExistingSpools:`Vinculando Rolos Existentes`,linkingExistingSpoolsDesc:`Para vincular rolos existentes do Spoolman ao seu AMS, passe o mouse sobre um slot do AMS e clique em "Vincular ao Spoolman".`,syncMode:`Modo de Sincronização`,syncModeAuto:`Automático`,syncModeManual:`Apenas Manual`,syncModeAutoDesc:`Os dados do AMS são sincronizados automaticamente quando alterações são detectadas`,syncModeManualDesc:`Somente sincronize quando acionado manualmente`,syncAmsData:`Sincronizar Dados do AMS`,syncAmsDataDesc:`Sincronize manualmente os dados do AMS da impressora com o Spoolman`,allPrinters:`Todas as Impressoras`,noDefaultPrinter:`Sem padrão (perguntar a cada vez)`,sidebarOrder:`Ordem da barra lateral`,saveThumbnails:`Salvar miniaturas`,captureFinishPhoto:`Capturar foto de conclusão`,noPrintersConfigured:`Nenhuma impressora configurada`,archiveMode:{always:`Sempre criar entrada de arquivo`,never:`Nunca criar entrada de arquivo`,ask:`Perguntar a cada vez`},checkForUpdatesLabel:`Verificar atualizações`,checkPrinterFirmware:`Verificar firmware da impressora`,includeBetaUpdates:`Incluir versões beta`,includeBetaUpdatesDesc:`Notificar sobre versões beta e pré-lançamento ao verificar atualizações`,localLogin:{disable:`Desativar login local com usuário/senha`,disableHint:`Quando ativado, somente provedores SSO podem fazer login. O LDAP não é afetado. Defina BAMBUDDY_LOCAL_LOGIN=true no servidor para manter um caminho de recuperação.`},enableRetry:`Habilitar tentativa`,homeAssistantDescription:`Controlar tomadas inteligentes via Home Assistant`,environmentManagedLabel:`(Gerenciado pelo Ambiente)`,autoEnabledViaEnv:`Habilitado automaticamente via variáveis de ambiente`,urlFromEnvReadOnly:`Valor definido pela variável de ambiente HA_URL (somente leitura)`,tokenFromEnvReadOnly:`Valor definido pela variável de ambiente HA_TOKEN (somente leitura)`,mqttConnectedTo:`Conectado a`,prometheusDescription:`Expor dados da impressora no formato Prometheus`,noSmartPlugsTitle:`Nenhuma tomada inteligente configurada`,noSmartPlugsDescription:`Adicione uma tomada inteligente baseada em Tasmota para monitorar o consumo de energia e automatizar o controle de energia.`,noProvidersTitle:`Nenhum provedor configurado`,noProvidersDescription:`Adicione um provedor para receber alertas.`,noTemplatesAvailable:`Nenhum modelo disponível. Reinicie o backend para gerar os modelos padrão.`,apiPermissionView:`Visualizar status da impressora e fila`,apiPermissionEdit:`Adicionar e remover itens da fila de impressão`,apiKeysEmptyTitle:`Nenhuma chave API`,apiKeysEmptyDescription:`Crie uma chave API para integrar com serviços externos.`,noUsersFound:`Nenhum usuário encontrado`,noGroupsFound:`Nenhum grupo encontrado`,noGroupsAvailable:`Nenhum grupo disponível`,passwordsDoNotMatch:`As senhas não coincidem`,systemGroupWarning:`Os nomes dos grupos do sistema não podem ser alterados`,authDisabledTitle:`Autenticação Desativada`,authDisabledFeature1:`Exigir login para acessar o sistema`,authDisabledFeature2:`Criar múltiplos usuários com permissões baseadas em grupos`,authDisabledFeature3:`Controlar acesso com mais de 50 permissões granulares`,userHasCreated:`Este usuário criou:`,userItemsQuestion:`O que você gostaria de fazer com esses itens?`,deleteUserConfirm:`Tem certeza de que deseja excluir este usuário?`,actionCannotBeUndone:`Esta ação não pode ser desfeita.`,addFirstSmartPlug:`Adicione sua primeira tomada inteligente`,providers:`Provedores`,log:`Registro`,testAll:`Testar tudo`,testResults:`Resultados do teste`,testPassedCount:`{{count}} aprovado`,testFailedCount:`{{count}} falhou`,messageTemplates:`Modelos de mensagem`,messageTemplatesDescription:`Personalize as mensagens de notificação para cada evento.`,apiKeys:`Chaves API`,apiKeysDescription:`Crie chaves API para integrações externas e webhooks.`,createKey:`Criar Chave`,apiKeyCreated:`Chave API criada com sucesso`,apiKeyCopyWarning:`Copie esta chave agora - ela não será exibida novamente!`,useInApiBrowser:`Usar no Navegador API`,apiKeyQrButton:`Código QR`,apiKeyQrTitle:`Escaneie para configurar`,apiKeyQrCaption:`Escaneie com seu app móvel para adicionar este servidor e a chave de API.`,apiKeyQrWarning:`Contém sua chave de API secreta — não compartilhe nem faça captura de tela onde outros possam ver.`,createNewApiKey:`Criar Nova Chave API`,keyName:`Nome da Chave`,keyNamePlaceholder:`e.g., Home Assistant, OctoPrint`,readStatus:`Status de Leitura`,readStatusDescription:`Visualizar status da impressora, fila, biblioteca, arquivos de impressão e pipelines do slicer`,manageQueue:`Gerenciar Fila`,manageQueueDescription:`Adicionar e remover itens da fila de impressão. Junto com "Gerenciar biblioteca", executar pipelines do slicer`,controlPrinter:`Controlar Impressora`,controlPrinterDescription:`Pausar, retomar e parar impressões`,manageLibrary:`Gerenciar biblioteca`,manageLibraryDescription:`Enviar, renomear, excluir e fatiar arquivos da biblioteca; importar modelos do MakerWorld. Junto com "Gerenciar Fila", executar pipelines do slicer`,manageInventory:`Gerenciar estoque`,manageInventoryDescription:`Criar, atualizar e excluir bobinas e registros de estoque. Necessário para quiosques SpoolBuddy (escaneamento NFC, leituras da balança, comandos de sistema do quiosque).`,manageMaintenance:`Gerenciar manutenção`,manageMaintenanceDescription:`Registrar manutenções concluídas, redefinir contadores, editar intervalos e gerenciar o catálogo de tipos de manutenção. Adequado a automações do Home Assistant que registram "limpei o bico" sem conceder controle mais amplo da impressora.`,manageArchives:`Gerenciar arquivos de impressão`,manageArchivesDescription:`Editar e excluir arquivos de impressão, incluindo a remoção de impressões antigas e da contribuição delas para as estatísticas. Adequado a automações que reduzem o histórico de impressão.`,manageProjects:`Gerenciar projetos`,manageProjectsDescription:`Criar, atualizar e excluir projetos e adicionar arquivos de impressão a eles. Adequado a automações que organizam as impressões em projetos.`,maintenanceBadge:`Manutenção`,archivesBadge:`Arquivos`,projectsBadge:`Projetos`,libraryBadge:`Biblioteca`,inventoryBadge:`Estoque`,cloudAccess:`Permitir acesso à nuvem`,cloudAccessDescription:`Lê predefinições e filamentos do Bambu Cloud em seu nome. Requer login no Bambu Cloud.`,cloudBadge:`Nuvem`,updateEnergyCost:`Atualizar preço da eletricidade`,updateEnergyCostDescription:`Permitir que esta chave envie POST de um novo preço por kWh para /settings/electricity-price. Útil para automações de tarifa dinâmica do Home Assistant (Tibber, Octopus, etc.). Este é o único campo de configuração gravável via API key.`,energyCostBadge:`Energia`,legacyKey:`Legado`,legacyKeyTooltip:`Criado antes da propriedade por usuário; recrie para acesso à nuvem`,unnamedKey:`Chave Sem Nome`,lastUsed:`Último uso`,read:`Ler`,control:`Controlar`,createFirstKey:`Crie sua primeira chave`,webhookEndpoints:`Endpoints de Webhook`,webhookApiKeyHint:`Use sua chave API no cabeçalho X-API-Key.`,webhook:{getAllStatus:`Obter status de todas as impressoras`,getSpecificStatus:`Obter status de uma impressora específica`,addToQueue:`Adicionar à fila de impressão`,pausePrint:`Pausar impressão`,resumePrint:`Retomar impressão`,stopPrint:`Parar impressão`},apiBrowser:`Navegador API`,apiBrowserDescription:`Explore e teste todos os endpoints de API disponíveis.`,apiKeyForTesting:`Chave API para Teste`,apiKeyPlaceholder:`Cole sua chave API aqui para testar endpoints autenticados...`,apiKeyHint:`Esta chave será enviada como cabeçalho X-API-Key nas solicitações.`,deleteApiKeyTitle:`Excluir Chave API`,deleteApiKeyMessage:`Tem certeza de que deseja excluir esta chave API? Quaisquer integrações usando esta chave deixarão de funcionar.`,deleteKey:`Excluir Chave`,amsDisplayThresholds:`Limiares de Exibição AMS`,amsThresholdsDescription:`Configure os limiares de cores para os indicadores de umidade e temperatura do AMS.`,humidity:`Umidade`,goodGreen:`Bom (verde)`,fairOrange:`Razoável (laranja)`,aboveFairBad:`Acima do limiar razoável mostra como vermelho (ruim)`,fairAlsoDryingThreshold:`Este limiar também é usado para acionar a secagem automática`,fairBelowDryingFloor:`A secagem automática não consegue atingir este valor: um AMS indica {{floor}}% ou mais enquanto aquece, então cada ciclo terminaria e recomeçaria de imediato. Aumente-o acima de {{floor}}% se usar a secagem automática.`,temperature:`Temperatura`,goodBlue:`Bom (azul)`,aboveFairHot:`Acima do limiar razoável mostra como vermelho (quente)`,tempAlarmThreshold:`Alarme acima de`,tempAlarmSeparateFromBand:`Apenas o limiar de alarme envia notificações — Bom e Razoável apenas colorem a exibição. Deixe vazio para alarmar no limiar razoável, como antes.`,tempAlarmMustBePositive:`Um limiar de 0 ou menos é ignorado — o alarme usa o limiar razoável.`,historyRetention:`Retenção de Histórico`,keepSensorHistory:`Manter histórico do sensor por`,historyRetentionDescription:`Dados antigos de umidade e temperatura serão automaticamente excluídos`,defaultPrintOptions:`Opções de impressão padrão`,defaultPrintOptionsDescription:`Defina valores padrão para opções de impressão. Podem ser alterados no diálogo de impressão.`,defaultBedLevelling:`Nivelamento da mesa`,defaultBedLevellingDesc:`Nivelar automaticamente a mesa antes da impressão`,defaultFlowCali:`Calibração de fluxo`,defaultFlowCaliDesc:`Calibrar fluxo de extrusão`,defaultVibrationCali:`Calibração de vibração`,defaultVibrationCaliDesc:`Reduzir artefatos de ringing`,defaultLayerInspect:`Inspeção da primeira camada`,defaultLayerInspectDesc:`Inspeção IA da primeira camada`,defaultTimelapse:`Timelapse`,defaultTimelapseDesc:`Gravar vídeo timelapse`,defaultNozzleOffsetCali:`Calibração de offset dos bicos`,defaultNozzleOffsetCaliDesc:`Calibrar offsets entre extrusores`,tempFanPresetsTitle:`Predefinições de temperatura e ventilador`,tempFanPresetsDescription:`Personalize os valores de seleção rápida exibidos nos popovers de temperatura e velocidade do ventilador do cartão da impressora. O botão Desligar sempre é exibido.`,tempFanPresetsNozzle:`Temperatura do bico`,tempFanPresetsBed:`Temperatura da mesa`,tempFanPresetsChamber:`Temperatura da câmara`,tempFanPresetsFan:`Velocidade do ventilador`,tempFanPresetsReset:`Restaurar padrões`,concurrentUploadsTitle:`Envios simultâneos`,concurrentUploadsDescription:`Quantas impressoras a fila pode abastecer com arquivos ao mesmo tempo. As impressoras recebem os arquivos lentamente (uma impressão grande pode levar vários minutos) e cada uma espera sua vez — portanto, em um parque maior, aumentar este valor evita que a última impressora de um lote tenha de esperar todas as transferências anteriores. Reduza-o se a sua rede ou o host do Bambuddy tiver dificuldade com transferências paralelas.`,concurrentUploadsLabel:`Impressoras abastecidas de uma vez`,concurrentUploadsHelp:`1 envia para uma impressora por vez (o comportamento anterior). O padrão é 4.`,staggeredStart:`Início escalonado`,staggeredStartDescription:`Tamanho de grupo e intervalo padrão ao escalonar inícios de lotes multi-impressora. Pode ser sobrescrito por lote no modal de impressão.`,preheatTitle:`Pré-aquecimento & Heat Soak`,preheatDescription:`Aquece a mesa (e a câmara, se suportada) e mantém a temperatura antes de iniciar cada impressão da fila. Útil para filamentos técnicos (PA, ABS) em impressoras sem aquecedor ativo de câmara — a mesa aquece a câmara por radiação enquanto o temporizador de soak roda. A temperatura alvo da mesa vem do arquivo de impressão; o comportamento da câmara depende do modelo da impressora.`,preheatEnabled:`Ativar pré-aquecimento & soak`,preheatEnabledDesc:`Quando desligado, as impressões na fila iniciam imediatamente. Cada item pode sobrescrever por impressão.`,preheatFilamentTargetsLabel:`Alvo da câmara por filamento (°C)`,preheatFilamentTargetsHint:`Bambuddy escolhe o alvo mais alto entre os slots AMS carregados. Uma impressão cujos slots derivam todos 0 — PLA, PETG, TPU, PVA — pula o preaquecimento por completo e começa imediatamente.`,preheatFilamentTargetsReset:`Redefinir para padrões`,preheatFilamentTargetsDefaultRow:`Outro / sem mapeamento`,preheatMaxWait:`Espera máx. (segundos)`,preheatMaxWaitHelp:`Teto da fase de aquecimento da câmara antes de passar ao soak.`,preheatSoak:`Soak (segundos)`,preheatSoakHelp:`Tempo de retenção após atingir o alvo ou expirar a espera máx.`,preheatHardwareTitle:`Comportamento por impressora:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E aquecem ativamente a câmara via M141. X1C/P2S leem a temperatura mas só aquecem a câmara por radiação da mesa. P1S/P1P/A1/A1 Mini não têm sensor de câmara — apenas o temporizador de soak se aplica.`,preheatPerItemDesc:`Aquece a mesa e a câmara antes desta impressão começar. Por padrão usa o interruptor global em Configurações → Workflow.`,preheatOverride_inherit:`Herdar`,preheatOverride_on:`Ligado`,preheatOverride_off:`Desligado`,calibrationMode_off:`Desligado`,calibrationMode_on:`Ligado`,calibrationMode_auto:`Auto`,preheatTargetOverride:`Sobrescrever alvo da câmara (°C, vazio = por filamento)`,preheatTargetOverrideHelp:`0 aquece a mesa e executa a estabilização sem a câmara. Em branco, uma impressão que não precisa de câmara pula o preaquecimento por completo.`,plateClear:`Confirmação de placa livre`,requirePlateClear:`Exigir confirmação de placa livre`,requirePlateClearDescription:`Quando ativado, o agendador aguarda uma confirmação de placa livre por impressora antes de iniciar impressões na fila em impressoras com trabalhos concluídos. Desativar isso também oculta o indicador de status da placa e o botão "Marcar placa como liberada" nos cartões das impressoras.`,keepBedWarm:`Manter a mesa aquecida entre impressões`,keepBedWarmDesc:`Enquanto aguarda a confirmação de placa limpa, mantém a mesa na temperatura de aquecimento definida abaixo para que a câmara continue quente — ou na temperatura da mesa da próxima impressão, se for maior. Aplica-se apenas quando a próxima impressão requer aquecimento de câmara (ASA, ABS, PA, PC, etc.). Requer a confirmação de placa limpa ativada.`,keepWarmBedTemp:`Temperatura da mesa em aquecimento (°C)`,keepWarmBedTempHelp:`Usado sempre que a mesa serve para aquecer a câmara: durante a manutenção aquecida e no pré-aquecimento quando o arquivo de impressão não traz temperatura da mesa. Uma temperatura maior vinda do arquivo sempre prevalece.`,keepWarmMaxMinutes:`Parar de manter aquecido após (minutos)`,keepWarmMaxMinutesHelp:`Se a placa não for liberada dentro desse tempo, os aquecedores são desligados em vez de ficarem ligados indefinidamente.`,gcodeInjection:`Injeção de G-code`,gcodeInjectionDescription:`Configure G-code personalizado para injetar no início e/ou no final das impressões para sistemas de impressão automática como Farmloop, SwapMod, AutoClear e Printflow 3D. Os snippets são configurados por modelo de impressora e aplicados quando "Injetar G-code" está ativado em um item da fila.`,gcodeInjectionNoPrinters:`Nenhuma impressora encontrada. Adicione impressoras para configurar snippets de G-code.`,gcodeStartLabel:`G-code inicial`,gcodeEndLabel:`G-code final`,gcodeStartPlaceholder:`G-code inserido antes do início da impressão...`,gcodeEndPlaceholder:`G-code adicionado após o término da impressão...`,staggerGroupSize:`Tamanho do grupo`,staggerGroupSizeHelp:`Impressoras para iniciar simultaneamente por grupo`,staggerInterval:`Intervalo (minutos)`,staggerIntervalHelp:`Atraso entre o início de cada grupo`,queueDrying:`Secagem Automática`,queueDryingDescription:`Secar automaticamente o filamento AMS quando a impressora estiver ociosa entre impressões na fila. Usa o limite de umidade acima.`,queueDryingEnabled:`Ativar secagem automática`,queueDryingEnabledDescription:`Iniciar secagem AMS automaticamente quando a impressora estiver ociosa e a umidade estiver acima do limite`,queueDryingBlock:`Aguardar conclusão da secagem`,queueDryingBlockDescription:`Bloquear a fila de impressão até a secagem terminar. Quando desativado, impressões têm prioridade.`,ambientDryingEnabled:`Secagem ambiente`,ambientDryingEnabledDescription:`Secar automaticamente o filamento em impressoras ociosas quando a umidade exceder o limite, mesmo sem impressões na fila.`,printDryingEnabled:`Continuar secagem durante a impressão`,printDryingEnabledDescription:`Permite que a secagem automática continue funcionando durante uma impressão em hardware compatível (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L com firmware recente). A temperatura de secagem é limitada automaticamente 5°C abaixo do valor de inatividade para proteger as bobinas.`,dryingPresets:`Predefinições de secagem`,dryingPresetsDescription:`Temperatura e duração por tipo de filamento. AMS 2 Pro usa temperaturas mais baixas, AMS-HT suporta temperaturas mais altas.`,dryingFilament:`Filamento`,humidityThresholds:`Limites de umidade`,humidityThresholdsDescription:`Gatilho de umidade por tipo de filamento para secagem automática e alarmes. Cargas mistas em um AMS usam o limite mais baixo.`,humidityThresholdCol:`Limite`,humidityThresholdDefault:`Padrão (tipos desconhecidos)`,printModal:`Modal de Impressão`,expandCustomMapping:`Expandir mapeamento personalizado por padrão`,expandCustomMappingDescription:`Ao imprimir em várias impressoras, mostrar o mapeamento AMS por impressora expandido`,authentication:`Autenticação`,authEnabledDescription:`Sua instância está protegida com autenticação de usuário`,authDisabledDescription:`Ative para exigir login e gerenciar o acesso dos usuários`,authDisabledMessage:`Ative a autenticação para criar contas de usuário, gerenciar permissões e proteger sua instância do Bambuddy.`,enableAuthentication:`Ativar Autenticação`,currentUser:`Usuário Atual`,changePassword:`Alterar Senha`,admin:`Administrador`,users:`Usuários`,addUser:`Adicionar Usuário`,groups:`Grupos`,addGroup:`Adicionar Grupo`,system:`Sistema`,noDescription:`Sem descrição`,userCount:`{{count}} usuários`,permissionCount:`{{count}} permissões`,createUser:`Criar Usuário`,username:`Nome de Usuário`,enterUsername:`Digite o nome de usuário`,password:`Senha`,enterPassword:`Digite a senha`,passwordRequirements:`Pelo menos 8 caracteres, com uma maiúscula, uma minúscula, um dígito e um caractere especial.`,confirmPassword:`Confirmar Senha`,confirmPasswordPlaceholder:`Confirme a senha`,viewReleaseOnGitHub:`Ver lançamento no GitHub`,turnAllPlugsOn:`Ligar todas as tomadas`,turnAllPlugsOff:`Desligar todas as tomadas`,clearNotificationLogs:`Limpar Logs de Notificação`,clearLogsMessage:`Isso excluirá permanentemente todos os logs de notificação com mais de 30 dias. Esta ação não pode ser desfeita.`,clearLogs:`Limpar Logs`,resetUiPreferences:`Redefinir Preferências de UI`,resetUiPreferencesMessage:`Isso redefinirá todas as preferências de UI para os padrões: ordem da barra lateral, tema, layout do painel, modos de exibição e preferências de classificação. Suas impressoras, arquivos e configurações do servidor NÃO serão afetados. A página será recarregada após a limpeza.`,resetPreferences:`Redefinir Preferências`,deleteGroupTitle:`Excluir Grupo`,deleteGroupMessage:`Tem certeza de que deseja excluir este grupo? Usuários neste grupo perderão essas permissões.`,deleteGroup:`Excluir Grupo`,disableAuthenticationTitle:`Desativar Autenticação`,disableAuthenticationMessage:`Tem certeza de que deseja desativar a autenticação? Isso tornará sua instância do Bambuddy acessível sem login. Todos os usuários permanecerão no banco de dados, mas a autenticação será desativada.`,disableAuthentication:`Desativar Autenticação`,configureBambuddy:`Configurar Bambuddy`,systemDefault:`Padrão do Sistema`,archiveSettings:`Configurações de Arquivo`,newWindow:`Nova Janela`,embeddedOverlay:`Sobreposição Incorporada`,preferredSlicer:`Fatiador Preferido`,preferredSlicerDescription:`Fatiador usado para fatiamento no aplicativo via sidecar da API`,openInSlicerLabel:`Abrir no fatiador`,openInSlicerInherit:`Mesmo do fatiador da API`,openInSlicerDescription:`Fatiador de desktop usado pelo botão 'Abrir no fatiador'. Mantenha em 'Mesmo do fatiador da API' para herdar, ou escolha um fatiador diferente para uso local.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev têm bugs CLI conhecidos que bloqueiam o fatiamento de muitos 3MFs criados pela Bambu — veja issues upstream #12426 (segfault em arquivos multi-extrusor pintados) e #13386 (rejeição de validação estrita de intervalos de parâmetros). Bambu Studio é recomendado até as correções upstream chegarem.`,useSlicerApi:`Usar API do fatiador`,useSlicerApiDescription:`Quando ativo, as ações "Slice" abrem o modal do fatiador interno e chamam o sidecar slicer-API. Quando inativo (padrão), redirecionam ao fatiador desktop via esquema URI.`,slicerCard:`Fatiador`,orcaslicerApiUrl:`OrcaSlicer sidecar URL`,bambuStudioApiUrl:`Bambu Studio sidecar URL`,slicerStallTimeout:`Tempo limite de inatividade do fatiador (minutos)`,slicerStallTimeoutDescription:`Desiste de um fatiamento apos esse tempo sem progresso do sidecar. Modelos pesados que continuam relatando progresso nunca sao interrompidos, por mais que demorem. Sidecars que nao relatam progresso usam este valor como limite de tempo total.`,slicerApiUrlDescription:`URL do contêiner sidecar slicer-API. Deixe em branco para usar SLICER_API_URL / BAMBU_STUDIO_API_URL.`,externalCameras:`Câmeras Externas`,costTracking:`Rastreamento de Custos`,printsOnly:`Apenas Impressões`,totalConsumption:`Consumo Total`,dataManagement:`Gerenciamento de Dados`,storageUsage:`Uso de Armazenamento`,storageUsageDescription:`Detalhamento do uso de dados por categoria`,storageUsageTotal:`Total`,storageUsageErrors:`Erros`,storageUsageOtherBreakdown:`Outros (inclui ativos estáticos, scripts e arquivos de configuração)`,storageUsageSystem:`Sistema`,storageUsageData:`Dados`,storageUsageUnavailable:`Informações de uso de armazenamento indisponíveis`,clearNotificationLogsDescription:`Excluir logs de notificação com mais de 30 dias`,resetUiPreferencesDescription:`Redefinir ordem da barra lateral, tema, modos de exibição e preferências de layout. Impressoras, arquivos e configurações não são afetados.`,enableHomeAssistant:`Ativar Home Assistant`,enableMqtt:`Ativar MQTT`,useTls:`Usar TLS`,enableMetricsEndpoint:`Ativar Endpoint de Métricas`,availableMetrics:`Métricas Disponíveis`,billingEnabled:`Habilitar cobrança`,billingEnabledDescription:`Cobrar dos usuários por impressões e habilitar recursos de financeiro`,printerKillSwitch:`Parada Automática de Impressão`,printerKillSwitchDescription:`Interromper imediatamente impressões não autorizadas`,financeBudgetReset:`Redefinir Orçamento Financeiro Mensal`,financeBudgetResetDay:`Dia de Redefinição`,financeBudgetResetDayHelp:`Para meses curtos, a redefinição utiliza o último dia do mês.`,financeBudgetResetTimezone:`Fuso Horário de Redefinição`,financeBudgetResetTimezoneHelp:`Der Budget-Fenster-Start wird in dieser Zeitzone berechnet.`,rebuildLedger:`Reconstruir razão da carteira`,rebuildLedgerStarted:`Reconstrução da razão iniciada`,rebuildLedgerConfirmTitle:`Reconstruir razão da carteira?`,rebuildLedgerConfirmMessage:`Isto reconstruirá a razão da carteira para reparar valores de saldo histórico. Execute isso apenas se você souber o que está fazendo.`,rebuildLedgerInProgress:`Iniciando reconstrução...`,editUser:`Editar Usuário`,deleteUserTitle:`Excluir Usuário`,groupName:`Nome do Grupo`,leaveEmptyForAnonymous:`Deixe vazio para anônimo`,leaveEmptyForNoAuth:`Deixe vazio para sem autenticação`,enterNewPassword:`Digite a nova senha`,confirmNewPassword:`Confirme a nova senha`,enterGroupName:`Digite o nome do grupo`,enterDescriptionOptional:`Digite a descrição (opcional)`,enterCurrentPassword:`Digite a senha atual`,enterNewPasswordMin6:`Digite a nova senha (mínimo 6 caracteres)`,toast:{keyCopied:`Chave copiada para a área de transferência`,copyFailed:`Falha ao copiar a chave`,keyAddedToBrowser:`Chave adicionada ao Navegador de API`,clearLogsFailed:`Falha ao limpar logs`,uiPreferencesReset:`Preferências de UI redefinidas. Atualizando...`,authDisabled:`Autenticação desativada com sucesso`,authDisableFailed:`Falha ao desativar a autenticação`,apiKeyCreated:`Chave de API criada`,apiKeyDeleted:`Chave de API excluída`,userCreated:`Usuário criado com sucesso`,userUpdated:`Usuário atualizado com sucesso`,userDeleted:`Usuário excluído com sucesso`,groupCreated:`Grupo criado com sucesso`,groupUpdated:`Grupo atualizado com sucesso`,groupDeleted:`Grupo excluído com sucesso`,fillRequiredFields:`Por favor, preencha todos os campos obrigatórios`,passwordsDoNotMatch:`As senhas não coincidem`,passwordTooShort:`A senha deve ter pelo menos 8 caracteres`,passwordNeedsUppercase:`A senha deve conter pelo menos uma letra maiúscula`,passwordNeedsLowercase:`A senha deve conter pelo menos uma letra minúscula`,passwordNeedsDigit:`A senha deve conter pelo menos um dígito`,passwordNeedsSpecial:`A senha deve conter pelo menos um caractere especial`,enterGroupName:`Por favor, insira um nome de grupo`,settingsSaved:`Configurações salvas`,noPermissionUpdate:`Você não tem permissão para alterar as configurações`,cameraSettingsSaved:`Configurações da câmera salvas`,enterCameraUrl:`Por favor, insira a URL da câmera`,passwordChanged:`Senha alterada com sucesso`,connectionFailed:`Falha na conexão`,testFailed:`Falha no teste`,cameraConnected:`Câmera conectada{{resolution}}`,cameraConnectedCoalesced:`Câmera conectada{{resolution}} (compartilhada com uma captura já em andamento)`},testConnection:`Testar Conexão`,catalog:{spoolCatalog:`Catálogo de Carretéis`,spoolCatalogDescription:`Pesos de carretéis vazios por marca/tipo. Usado para pesquisa automática de peso ao adicionar carretéis.`,searchCatalog:`Pesquisar no catálogo...`,addNewEntry:`Adicionar Nova Entrada`,namePlaceholder:`Nome (ex.: Bambu Lab - Plástico)`,weight:`Peso`,type:`Tipo`,default:`Padrão`,custom:`Personalizado`,noMatch:`Nenhuma entrada corresponde à sua pesquisa`,empty:`Nenhuma entrada no catálogo`,deleteEntry:`Excluir Entrada`,deleteConfirm:`Tem certeza de que deseja excluir "{{name}}"?`,resetCatalog:`Redefinir Catálogo`,resetConfirm:`Redefinir catálogo para os padrões? Isso removerá todas as entradas personalizadas.`,loadFailed:`Falha ao carregar o catálogo de carretéis`,nameWeightRequired:`Nome e peso são obrigatórios`,entryAdded:`Entrada adicionada`,addFailed:`Falha ao adicionar entrada`,entryUpdated:`Entrada atualizada`,updateFailed:`Falha ao atualizar entrada`,entryDeleted:`Entrada excluída`,deleteFailed:`Falha ao excluir entrada`,resetSuccess:`Catálogo redefinido para os padrões`,resetFailed:`Falha ao redefinir catálogo`,exported:`Exportadas {{count}} entradas`,imported:`Importadas {{added}} entradas ({{skipped}} ignoradas)`,importFailed:`Falha ao importar: formato JSON inválido`,exportTooltip:`Exportar catálogo para JSON`,importTooltip:`Importar catálogo de JSON`,resetTooltip:`Redefinir para os padrões`,selectedCount:`{{count}} selecionados`,deleteSelected:`Excluir Selecionados`,bulkDeleteConfirm:`Tem certeza de que deseja excluir {{count}} entradas?`,bulkDeleted:`{{count}} entradas excluídas`,bulkDeleteFailed:`Falha ao excluir entradas`,material:`Material`,spoolWeight:`Peso do carretel`,color:`Cor`,updateSpoolWeight:`Atualizar peso do carretel`,filamentUpdated:`Filamento atualizado`,filamentUpdateFailed:`Falha ao atualizar filamento`,filamentUpdateInvalid:`Dados de filamento inválidos`,keepExistingSpoolWeight:`Manter peso antigo para carretéis existentes`,keepExistingSpoolWeightDesc:`Os carretéis já criados com este tipo de filamento mantêm o peso tara antigo. Novos carretéis usam o valor atualizado.`,applyToAllSpools:`Aplicar a todos os carretéis`,applyToAllSpoolsDesc:`Todos os cálculos de peso para este tipo de filamento usam imediatamente o novo peso tara.`},colorCatalog:{title:`Catálogo de Cores`,description:`Cores de filamento por fabricante/material. Usado para pesquisa automática de cores ao adicionar carretéis.`,searchColors:`Pesquisar cores...`,allManufacturers:`Todos os fabricantes`,addNewColor:`Adicionar Nova Cor`,manufacturer:`Fabricante`,colorName:`Nome da Cor`,hex:`Hex`,materialOptional:`Material (opcional)`,showing:`Mostrando {{filtered}} de {{total}} cores`,noMatch:`Nenhuma cor corresponde à sua pesquisa`,empty:`Nenhuma cor no catálogo`,deleteColor:`Excluir Cor`,deleteConfirm:`Tem certeza de que deseja excluir "{{name}}"?`,resetCatalog:`Redefinir Catálogo de Cores`,resetConfirm:`Redefinir catálogo para os padrões? Isso removerá todas as cores personalizadas.`,sync:`Sincronizar`,starting:`Iniciando...`,syncTooltip:`Sincronizar do FilamentColors.xyz (2000+ cores, pode levar um minuto)`,loadFailed:`Falha ao carregar o catálogo de cores`,fieldsRequired:`Fabricante, nome da cor e cor hex são obrigatórios`,colorAdded:`Cor adicionada`,addFailed:`Falha ao adicionar cor`,colorUpdated:`Cor atualizada`,updateFailed:`Falha ao atualizar cor`,colorDeleted:`Cor excluída`,deleteFailed:`Falha ao excluir cor`,resetSuccess:`Catálogo de cores redefinido para os padrões`,resetFailed:`Falha ao redefinir catálogo`,syncUpToDate:`Já está atualizado ({{count}} cores verificadas)`,syncComplete:`Adicionadas {{added}} novas cores ({{skipped}} já existiam)`,syncError:`Erro de sincronização`,syncFailed:`Falha ao sincronizar do FilamentColors.xyz`,exported:`Exportadas {{count}} cores`,imported:`Importadas {{added}} cores ({{skipped}} ignoradas)`,importFailed:`Falha ao importar: formato JSON inválido`,selectedCount:`{{count}} selecionados`,deleteSelected:`Excluir Selecionados`,bulkDeleteConfirm:`Tem certeza de que deseja excluir {{count}} cores?`,bulkDeleted:`{{count}} cores excluídas`,bulkDeleteFailed:`Falha ao excluir cores`},dateFormat:`Formato de data`,dateFormatUs:`US (MM/DD/AAAA)`,dateFormatEu:`EU (DD/MM/AAAA)`,dateFormatIso:`ISO (AAAA-MM-DD)`,timeFormat:`Formato de hora`,timeFormat12:`12 horas (3:30 PM)`,timeFormat24:`24 horas (15:30)`,defaultPrinter:`Impressora padrão`,defaultPrinterDescription:`Pré-selecionar esta impressora para uploads, reimpressões e outras operações.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Use o layout da barra lateral para reordenar itens, restaurar a visibilidade e gerenciar links personalizados.`,setDefault:`Definir padrão`,sidebarOrderSetDefaultHint:`Definir padrão aplica a ordem atual do menu aos usuários que ainda não personalizaram o seu.`,sidebarDefaultSet:`Ordem padrão do menu foi definida.`,sidebarDefaultCleared:`Ordem padrão do menu removida.`,sidebarDefaultFailed:`Falha ao definir a ordem padrão do menu.`,reset:`Redefinir`,darkMode:`Modo escuro`,lightMode:`Modo claro`,active:`(ativo)`,background:`Fundo`,accent:`Destaque`,style:`Estilo`,bgNeutral:`Neutro`,bgWarm:`Quente`,bgCool:`Frio`,bgOled:`OLED Preto`,bgSlate:`Azul ardósia`,bgForest:`Verde floresta`,accentGreen:`Verde`,accentTeal:`Azul-petróleo`,accentBlue:`Azul`,accentOrange:`Laranja`,accentPurple:`Roxo`,accentRed:`Vermelho`,styleClassic:`Clássico`,styleGlow:`Brilhante`,styleVibrant:`Vibrante`,themeToggleHint:`Alternar entre modo escuro, claro e sistema usando o ícone na barra lateral.`,progressInTitle:`Progresso na aba`,progressInTitleDescription:`Mostra a porcentagem da impressão ativa e um anel de progresso na aba do navegador.`,autoArchivePrints:`Arquivar impressões automaticamente`,autoArchiveDescription:`Salvar automaticamente arquivos 3MF quando impressões forem concluídas`,saveThumbnailsDescription:`Extrair e salvar imagens de pré-visualização dos arquivos 3MF`,captureFinishPhotoDescription:`Tirar foto da câmera da impressora quando a impressão for concluída. Bambuddy grava um timelapse curto durante a impressão para que a foto possa ser obtida do momento antes da mesa descer; o arquivo do timelapse é mantido se você habilitou o timelapse para esta impressão, caso contrário ele é excluído automaticamente após a captura da foto.`,finishPhotoRestorePlate:`Elevar a mesa para a foto final`,finishPhotoRestorePlateDescription:`A impressora baixa a mesa cerca de 100 mm ao fim de uma impressão, deixando a peça pronta abaixo do enquadramento da câmera. O Bambuddy a eleva novamente até logo acima da última camada impressa, tira a foto e depois a baixa de novo. Ignorado quando a altura da impressão é desconhecida ou há outro trabalho na fila.`,ffmpegNotInstalled:`ffmpeg não instalado`,ffmpegRequired:`A captura de câmera requer ffmpeg. Instale via <brew>brew install ffmpeg</brew> (macOS) ou <apt>apt install ffmpeg</apt> (Linux).`,camera:`Câmera`,cameraViewMode:`Modo de visualização da câmera`,cameraOverlayDescription:`A câmera abre em uma sobreposição redimensionável na tela principal`,cameraWindowDescription:`A câmera abre em uma janela separada do navegador`,externalCamerasDescription:`Configure câmeras externas para substituir a câmera integrada da impressora. Suporta streams MJPEG, RTSP, snapshots HTTP e câmeras USB (V4L2). Quando habilitada, a câmera externa é usada para visualização ao vivo e fotos de conclusão.`,cameraPlaceholderUsb:`Caminho do dispositivo (/dev/video0)`,cameraPlaceholderUrl:`URL da câmera (rtsp://... ou http://...)`,cameraTypeMjpeg:`Stream MJPEG`,cameraTypeRtsp:`Stream RTSP`,cameraTypeSnapshot:`Snapshot HTTP`,cameraTypeUsb:`Câmera USB (V4L2)`,cameraSnapshotUrl:`URL de captura (opcional)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`URL de frame único usado para miniaturas de notificação, fotos de finalização, frames do timelapse por camada e detecção de mesa. Timelapse e detecção de mesa requerem cada um seu próprio toggle por impressora — esta URL é apenas a fonte de imagem que eles usam quando ativos. Deixe em branco para capturar do stream ao vivo acima. Útil para go2rtc (/api/frame.jpeg) e câmeras IP com endpoint de captura dedicado.`,cameraRotation:`Rotação`,test:`Testar`,connected:`Conectado`,disconnected:`Desconectado`,currency:`Moeda`,defaultFilamentCost:`Custo padrão do filamento (por kg)`,electricityCost:`Custo da eletricidade por kWh`,energyDisplayMode:`Modo de exibição de energia`,energyModePrintDescription:`O painel mostra a soma da energia usada durante as impressões`,energyModeTotalDescription:`O painel mostra a energia total dos plugues inteligentes`,fileManager:`Gerenciador de arquivos`,createArchiveEntry:`Criar entrada de arquivo ao imprimir`,createArchiveEntryDescription:`Ao imprimir pelo gerenciador de arquivos, criar opcionalmente uma entrada de arquivo`,lowDiskSpaceWarning:`Aviso de pouco espaço em disco`,lowDiskSpaceDescription:`Mostrar aviso quando o espaço livre em disco ficar abaixo deste limite`,printerFirmware:`Firmware da impressora`,checkFirmwareDescription:`Verificar atualizações de firmware da Bambu Lab`,bambuddySoftware:`Software Bambuddy`,autoCheckDescription:`Verificar automaticamente novas versões ao iniciar`,checkNow:`Verificar agora`,updateAvailableVersion:`Atualização disponível: v{{version}}`,releaseNotes:`Notas da versão`,updateViaDocker:`Atualizar via Docker Compose:`,composeDirectory:`Diretório do Compose`,composeDirectoryHint:`Diretório que contém seu docker-compose.yml. Deixe em branco para omitir o cd.`,copyUpdateCommand:`Copiar comando de atualização`,updateViaHomeAssistant:`As atualizações são gerenciadas pelo Supervisor do Home Assistant. Abra Configurações → Complementos → Bambuddy no Home Assistant para instalar a nova versão.`,updateViaWindowsInstaller:`Instalações no Windows são atualizadas executando o instalador novamente. Baixe a nova versão abaixo — seus dados, configurações e impressoras são preservados.`,downloadWindowsInstaller:`Baixar instalador da v{{version}}`,installUpdate:`Instalar atualização`,latestVersionRunning:`Você está usando a versão mais recente`,failedToCheckUpdates:`Falha ao verificar atualizações: {{error}}`,backupRestore:`Backup e Restauração`,backupRestoreDescription:`Exportar/importar configurações e configurar backup do GitHub`,goToBackup:`Ir para backup`,externalUrl:`URL externa`,externalUrlDescription:`A URL externa onde o Bambuddy está acessível. Usada para imagens de notificação e integrações externas.`,bambuddyUrl:`URL do Bambuddy`,externalUrlHint:`Inclua protocolo e porta (ex: http://192.168.1.100:8000)`,ftpRetry:`Tentativa FTP`,ftpRetryDescription:`Tentar novamente operações FTP quando o WiFi da impressora é instável. Aplica-se a downloads 3MF, uploads de impressão, downloads de timelapse e atualizações de firmware.`,autoRetryDescription:`Tentar novamente automaticamente operações FTP que falharam`,retryAttempts:`Tentativas de reenvio`,retryDelay:`Atraso entre tentativas`,connectionTimeout:`Tempo limite de conexão`,time_one:`{{count}} vez`,time_other:`{{count}} vezes`,second_one:`{{count}} segundo`,second_other:`{{count}} segundos`,nSeconds:`{{count}} segundos`,increaseForWeakWifi:`Aumente para impressoras com WiFi fraco`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Conecte ao Home Assistant para controlar plugues inteligentes via API REST do HA. Suporta entidades switch, light, input_boolean e script.`,homeAssistantUrl:`URL do Home Assistant`,longLivedAccessToken:`Token de acesso de longa duração`,haTokenHint:`Crie um token no HA: Perfil → Tokens de acesso de longa duração → Criar token`,connectionSuccessful:`Conexão bem-sucedida`,connectionFailed:`Falha na conexão`,haConnectionSuccess:`Conectado com sucesso ao Home Assistant.`,haConnectionFailed:`Falha ao conectar ao Home Assistant.`,mqttPublishing:`Publicação MQTT`,mqttDescription:`Publique eventos do BamBuddy para um broker MQTT externo para integração com Node-RED, Home Assistant e outros sistemas de automação.`,mqttEnableDescription:`Publicar eventos no broker MQTT externo`,brokerHostname:`Hostname do broker`,port:`Porta`,usernameOptional:`Usuário (opcional)`,passwordOptional:`Senha (opcional)`,topicPrefix:`Prefixo do tópico`,topicPrefixHint:`Os tópicos serão: {{prefix}}/printers/<serial>/status, etc.`,prometheusMetrics:`Métricas Prometheus`,prometheusEndpointDescription:`Expor métricas da impressora em <code>/api/v1/metrics</code> para monitoramento Prometheus/Grafana.`,bearerTokenOptional:`Token Bearer (opcional)`,bearerTokenHint:`Se definido, as requisições devem incluir <code>Authorization: Bearer <token></code>`,metricsConnectionStatus:`Status da conexão`,metricsPrinterState:`Estado da impressora (idle/printing/etc)`,metricsPrintProgress:`Progresso da impressão 0-100%`,metricsBedTemp:`Temperatura da mesa`,metricsNozzleTemp:`Temperatura do bico`,metricsPrintsTotal:`Total de impressões por resultado`,metricsMore:`...e mais (camadas, ventoinhas, fila, uso de filamento)`,smartPlugsDescription:`Conecte plugues inteligentes (Tasmota ou Home Assistant) para automatizar o controle de energia e rastrear o consumo energético das suas impressoras.`,allOn:`Ligar todos`,allOff:`Desligar todos`,addSmartPlug:`Adicionar plugue inteligente`,energySummary:`Resumo de energia`,currentPower:`Potência atual`,plugsOnline:`{{reachable}}/{{total}} plugues online`,today:`Hoje`,yesterday:`Ontem`,total:`Total`,enablePlugsForSummary:`Habilite os plugues para ver o resumo de energia`,addNotificationProvider:`Adicionar`,systemBadge:`(Sistema)`,creating:`Criando...`,changing:`Alterando...`,deleteUserAndItems:`Excluir usuário E seus itens`,deleteUserKeepItems:`Excluir usuário, manter itens (ficarão sem dono)`,ok:`OK`,twoFa:{totpTitle:`App Autenticador (TOTP)`,totpDesc:`Use um app como Google Authenticator, Aegis ou Authy.`,emailOtpTitle:`OTP por e-mail`,emailOtpDesc:`Envie um código único para {{email}} ao fazer login.`,emailOtpNoEmail:`Adicione um endereço de e-mail à sua conta para ativar este método.`,addEmailFirst:`Sua conta não tem endereço de e-mail. Peça a um administrador para adicionar um.`,setupTotp:`Configurar App Autenticador`,setupAuthApp:`Configurar App Autenticador`,setupInstructions:`Escaneie o código QR com seu app autenticador e confirme com um código.`,manualEntry:`Não consegue escanear? Digite este segredo manualmente:`,scannedContinue:`Código escaneado — continuar`,enterCodeToConfirm:`Digite o código de 6 dígitos do seu app autenticador para confirmar.`,activate:`Ativar`,disableTotp:`Desativar Autenticador`,disableConfirmHint:`Digite um código TOTP válido ou um código de backup para desativar o autenticador.`,totpDisabled:`App autenticador desativado.`,emailOtpEnabled:`OTP por e-mail ativado.`,emailOtpDisabled:`OTP por e-mail desativado.`,smtpRequired:`Por favor, configure e teste as configurações SMTP primeiro.`,invalidCode:`Código inválido. Por favor, tente novamente.`,enableEmailOtp:`Ativar OTP por e-mail`,disableEmailOtp:`Desativar OTP por e-mail`,emailSetupEnterCode:`Um código de verificação foi enviado para o seu endereço de e-mail. Digite-o abaixo para confirmar que você possui esta caixa de entrada.`,verifyAndEnable:`Verificar e Ativar`,emailDisablePasswordHint:`Digite a senha da sua conta para confirmar a desativação do OTP por e-mail.`,passwordPlaceholder:`Digite sua senha`,backupCodesTitle:`Salve seus códigos de backup`,backupCodesWarning:`Guarde estes códigos em lugar seguro. Cada código só pode ser usado uma vez.`,backupCodesRemaining:`{{count}} códigos de backup restantes`,savedCodes:`Códigos salvos`,regenBackup:`Regenerar códigos de backup`,regenBackupHint:`Digite seu código TOTP atual para gerar 10 novos códigos de backup.`,newBackupCodes:`Novos códigos de backup`,linkedAccounts:`Contas SSO vinculadas`,linkedAccountsDesc:`Estes provedores de identidade externos estão vinculados à sua conta.`,oidcUnlinked:`Conta desvinculada.`},sessionPolicy:{title:`Política de sessão`,description:`Duração máxima da sessão para novos logins de usuário. Tokens já emitidos mantêm sua expiração original.`,preset24h:`24 horas`,preset7d:`7 dias`,preset30d:`30 dias`,customHoursLabel:`Duração personalizada da sessão em horas`,hoursSuffix:`horas`,warning:`Sessões mais longas reduzem a proteção de logout automático. Recomendado apenas para implantações de usuário único confiáveis.`},oidc:{title:`Provedores SSO / OIDC`,desc:`Configure provedores OpenID Connect para login único.`,addProvider:`Adicionar provedor`,newProvider:`Novo provedor`,empty:`Nenhum provedor OIDC configurado ainda.`,created:`Provedor criado.`,updated:`Provedor atualizado.`,deleted:`Provedor excluído.`,refreshIcon:`Atualizar ícone`,removeIcon:`Remover ícone`,iconRefreshed:`Ícone atualizado.`,iconRemoved:`Ícone removido.`,iconFetchFailed:`Não foi possível obter o ícone da URL do provedor.`,deleteTitle:`Excluir provedor`,deleteMessage:`Excluir "{{name}}"? Todas as contas vinculadas serão desconectadas.`,form:{name:`Nome de exibição`,issuerUrl:`URL do emissor`,clientId:`ID do cliente`,clientSecret:`Client secret`,scopes:`Escopos`,iconUrl:`URL do ícone (opcional)`,enabled:`Ativado`,autoCreate:`Criar usuários automaticamente`,autoCreateDesc:`Cria automaticamente uma conta local no primeiro login.`,autoLink:`Vincular contas existentes automaticamente`,autoLinkDesc:`Vincula contas locais existentes por e-mail no primeiro login.`,secretHint:`deixe em branco para manter`,secretPlaceholder:`novo segredo`,emailClaim:`Claim de e-mail`,emailClaimDesc:`Claim JWT usado como identidade de e-mail. Use 'preferred_username' ou 'upn' para Azure Entra ID (que não envia email_verified). Use apenas nomes de claim confiáveis.`,emailClaimPlaceholder:`e-mail`,emailClaimCustomClaimAutoLinkWarning:`Claims personalizadas são seguras para vinculação automática apenas quando o valor é administrado pelo tenant (ex. Azure Entra ID upn / preferred_username). Não ative a vinculação automática se seu IdP permite que usuários auto-declarem essa claim.`,requireEmailVerified:`Exigir e-mail verificado`,requireEmailVerifiedDesc:`Aceitar o claim de e-mail apenas quando o provedor o marcar como verificado.`,requireEmailVerifiedWarning:`Aviso: o e-mail será aceito sem verificação. Use apenas com provedores confiáveis.`,requireEmailVerifiedAutoLink:`Desabilite o vínculo automático primeiro para alterar esta configuração.`,defaultGroup:`Grupo padrão`,defaultGroupDesc:`Grupo atribuído aos usuários criados automaticamente. Retorna a Viewers se não definido.`,defaultGroupViewersFallback:`Viewers (padrão)`,autologin:`Login automático`,autologinDesc:`Redirecionar visitantes não autenticados diretamente para este provedor. Apenas um provedor pode ter esta marcação.`}},encryption:{title:`Status de criptografia MFA`,enabledFromEnv:`Criptografia em repouso ativa (chave da variável de ambiente MFA_ENCRYPTION_KEY)`,enabledFromFile:`Criptografia em repouso ativa (chave do diretório de dados)`,enabledGenerated:`Criptografia em repouso ativa com chave auto-gerada`,notConfigured:`Criptografia em repouso não configurada`,notConfiguredDesc:`Os segredos TOTP e client_secrets OIDC são armazenados em texto plano. Defina MFA_ENCRYPTION_KEY ou reinicie o Bambuddy com um diretório de dados gravável para gerar automaticamente.`,allEncrypted:`Todos os segredos MFA são criptografados em repouso.`,legacyRowsLabel:`Linhas legadas em texto plano`,encryptedRowsLabel:`Linhas criptografadas`,legacyRowsWarning:`{{count}} linha(s) legada(s) em texto plano detectada(s). Salve novamente o provedor OIDC ou registre novamente o autenticador do usuário para migrar ao armazenamento criptografado.`,backupHint:`A chave auto-gerada é armazenada em DATA_DIR/.mfa_encryption_key e incluída em ZIPs de backup locais. Mantenha seus backups seguros ou defina MFA_ENCRYPTION_KEY explicitamente.`,decryptionBrokenTitle:`Chave de criptografia ausente`,decryptionBrokenError:`{{count}} registro(s) criptografado(s) não podem ser descriptografados pois a chave de criptografia não está mais disponível. Restaure o MFA_ENCRYPTION_KEY anterior ou DATA_DIR/.mfa_encryption_key para recuperar.`,migrationErrorWarning:`{{count}} linha(s) antiga(s) não puderam ser recriptografadas na inicialização. Verifique os logs do servidor e reinicie o Bambuddy para tentar novamente.`},spoolbuddy:{infoTitle:`Dispositivos SpoolBuddy`,infoBody:`Os kiosks SpoolBuddy se registram automaticamente via heartbeat. Cancele o registro de um dispositivo aqui se não estiver mais em uso ou se um duplicado obsoleto foi deixado por uma falha do daemon.`,duplicatesTitle:`{{count}} dispositivos registrados`,duplicatesBody:`Apenas o primeiro dispositivo registrado é usado pela interface do kiosk. Se algum destes for um duplicado obsoleto após uma falha, cancele seu registro — um dispositivo online se registrará novamente no próximo heartbeat.`,empty:`Nenhum dispositivo SpoolBuddy registrado ainda.`,online:`Online`,offline:`Offline`,unregister:`Cancelar registro`,unregisterSuccess:`Dispositivo removido`,unregisterError:`Falha ao cancelar registro`,confirmTitle:`Cancelar registro do dispositivo SpoolBuddy?`,confirmBody:`Isso removerá "{{hostname}}" ({{deviceId}}) do banco de dados. Se o dispositivo estiver online, ele se registrará novamente no próximo heartbeat.`,ipAddress:`Endereço IP`,firmware:`Firmware`,lastSeen:`Visto pela última vez`,daemonUptime:`Tempo ativo do daemon`,systemUptime:`Tempo ativo do sistema`,never:`nunca`,nfc:`NFC`,scale:`Balança`,cpuTemp:`Temp. CPU`,cpuLoad:`Carga da CPU`,memory:`Memória`,disk:`Disco`,update:`Atualizar`,updateConfirmTitle:`Atualizar daemon do Spoolbuddy?`,updateConfirmBody:`Iniciar uma atualização de software em "{{hostname}}"? O daemon será reiniciado após a aplicação.`,restartBrowser:`Reiniciar navegador`,restartBrowserConfirmTitle:`Reiniciar o navegador do kiosk?`,restartBrowserConfirmBody:`Reiniciar o navegador do kiosk em "{{hostname}}"? A tela ficará em branco brevemente.`,restartDaemon:`Reiniciar daemon`,restartDaemonConfirmTitle:`Reiniciar daemon do Spoolbuddy?`,restartDaemonConfirmBody:`Reiniciar o daemon do Spoolbuddy em "{{hostname}}"? O dispositivo ficará offline por alguns segundos.`,reboot:`Reiniciar`,rebootConfirmTitle:`Reiniciar o dispositivo?`,rebootConfirmBody:`Reiniciar "{{hostname}}"? O dispositivo ficará offline por cerca de um minuto.`,shutdown:`Desligar`,shutdownConfirmTitle:`Desligar o dispositivo?`,shutdownConfirmBody:`Desligar "{{hostname}}"? Será necessário acesso físico para ligá-lo novamente.`,commandConfirm:`Confirmar`,commandQueued:`Comando enfileirado`,commandError:`Falha ao enviar comando`},pipelineLimits:{title:`Limites de pipelines do slicer`,maxCopiesLabel:`Cópias máximas por execução`,maxCopiesDesc:`Limite superior de cópias que operadores podem solicitar ao executar uma pipeline. O limite rígido no lado do servidor é 1000.`},pipelines:{title:`Pipelines do Slicer`,subtitle:`Pacotes de predefinições reutilizáveis (impressora + processo + filamentos + tipo de mesa). Salve um a partir do diálogo Cortar e aplique com um clique no próximo arquivo.`,loading:`Carregando pipelines…`,loadError:`Não foi possível carregar as pipelines.`,confirmDelete:`Excluir esta pipeline? Isso não pode ser desfeito.`,staleWarning:`Uma ou mais predefinições referenciadas não existem mais. Salve novamente esta pipeline a partir do diálogo Cortar para corrigir.`,empty:{title:`Ainda não há pipelines.`,howto:`Abra o diálogo Cortar em qualquer arquivo, escolha impressora / processo / filamentos / mesa e clique em "Salvar como pipeline". Suas pipelines salvas aparecerão aqui.`},field:{name:`Nome da pipeline`,description:`Descrição`,targetPrinter:`Impressora de destino`,noTarget:`— Sem destino —`,targetKind:`Tipo de destino`,targetKindSpecific:`Impressora específica`,targetKindClass:`Classe de impressora`,targetModelClass:`Modelo de impressora`,fanoutStrategy:`Estratégia de distribuição`,fanout:{max_parallel:`Máximo paralelo — distribuir em qualquer impressora ociosa compatível`,round_robin:`Round robin — alternar entre impressoras elegíveis`,fill_one_first:`Encher uma primeiro — fixar todas as cópias em uma impressora`},fanoutShort:{max_parallel:`paralelo`,round_robin:`round robin`,fill_one_first:`primeiro um`}},action:{save:`Salvar`,cancel:`Cancelar`,rename:`Renomear`,delete:`Excluir`},slot:{printer:`Impressora`,process:`Processo`,filament:`Filamento`,filamentN:`Filamento {{n}}`,filamentAll:`Todos os {{n}} slots`,bed:`Mesa`},group:{profiles:`Perfis`,filaments:`Filamentos`},searchPlaceholder:`Buscar pipelines…`,filterTargetType:`Filtrar por tipo de destino`,filterTarget:`Filtrar por destino`,filter:{all:`Todos os destinos`,noTarget:`Sem destino`,count:`{{shown}} / {{total}}`,noMatches:`Nenhuma pipeline corresponde aos filtros atuais.`},toast:{saved:`Pipeline salva`,saveFailed:`Falha ao salvar`,deleted:`Pipeline excluída`,deleteFailed:`Falha ao excluir`},noTargetHint:`Defina uma impressora de destino para executar`,noTargetWarning:`Defina uma impressora de destino antes de executar esta pipeline.`,runs:{lastRun:`Última execução`,status:{queued:`na fila`,slicing:`cortando`,dispatching:`enviando`,in_progress:`imprimindo`,completed:`concluída`,failed:`falhou`,partial_failure:`falha parcial`,cancelled:`cancelada`}}}},notification:{printStarted:{title:`Impressão Iniciada`,body:`{{printer}}: {{filename}} iniciou a impressão`},printCompleted:{title:`Impressão Concluída`,body:`{{printer}}: {{filename}} foi concluída com sucesso`},printFailed:{title:`Falha na Impressão`,body:`{{printer}}: {{filename}} falhou`},printStopped:{title:`Impressão Interrompida`,body:`{{printer}}: {{filename}} foi interrompida`},printProgress:{title:`Progresso da Impressão`,body:`{{printer}}: {{filename}} está {{percent}}% concluída`},printerOffline:{title:`Impressora Offline`,body:`{{printer}} está offline`},printerError:{title:`Erro na Impressora`,body:`{{printer}} – {{error}}`},filamentLow:{title:`Filamento Baixo`,body:`{{printer}}: O filamento está acabando`},maintenanceDue:{title:`Manutenção Pendente`,body:`{{printer}}: {{items}} precisam de atenção`}},errors:{generic:`Algo deu errado`,networkError:`Erro de rede. Por favor, verifique sua conexão.`,notFound:`Não encontrado`,unauthorized:`Não autorizado`,serverError:`Erro no servidor`,validationError:`Por favor, verifique sua entrada`,printerConnectionFailed:`Falha ao conectar à impressora`,saveFailed:`Falha ao salvar alterações`,deleteFailed:`Falha ao excluir`,loadFailed:`Falha ao carregar dados`},hmsErrors:{title:`Erros - {{name}}`,noErrors:`Nenhum erro`,viewOnWiki:`Ver no Bambu Lab Wiki`,mqttVerifyFailedRemedy:`Ative o Modo Desenvolvedor na impressora, reinicie a impressora e inicie o trabalho novamente.`,unknownCode:`Código HMS desconhecido — consulte o wiki da Bambu Lab para mais detalhes.`,clearInstructions:`Limpe os erros na impressora para descartá-los aqui.`,clearErrors:`Limpar Erros`,clearSuccess:`Erros HMS limpos`,clearFailed:`Falha ao limpar erros HMS`,actionSuccess:`Ação enviada à impressora`,actionFailed:`Falha ao enviar ação`,runoutExpectedSlot:`O filamento acabou em {{ranOut}}. A impressora agora aguarda filamento compatível em {{expected}}. Insira uma bobina em {{expected}} e selecione Tentar novamente.`,runoutExpectedSlotOnly:`A impressora está aguardando filamento compatível em {{expected}}. Insira uma bobina ali e selecione Tentar novamente.`,runoutSlotUnknown:`O filamento acabou e a impressão está pausada. O Bambuddy não conseguiu determinar qual slot a impressora agora espera — verifique a tela da impressora para o slot solicitado.`,actions:{RESUME_PRINTING:`Retomar impressão`,RESUME_PRINTING_DEFECTS:`Retomar (defeitos aceitáveis)`,RESUME_PRINTING_PROBELM_SOLVED:`Retomar (problema resolvido)`,STOP_PRINTING:`Parar impressão`,CHECK_ASSISTANT:`Ver assistente`,FILAMENT_EXTRUDED:`Filamento extrudado, continuar`,RETRY_FILAMENT_EXTRUDED:`Ainda não extrudado, tentar novamente`,CONTINUE:`Finalizado, continuar`,LOAD_VIRTUAL_TRAY:`Carregar filamento`,OK_BUTTON:`OK`,FILAMENT_LOAD_RESUME:`Filamento carregado, retomar`,JUMP_TO_LIVEVIEW:`Ver ao vivo`,NO_REMINDER_NEXT_TIME:`Não lembrar da próxima vez`,REFRESH_NOZZLE:`Verificar novamente`,IGNORE_NO_REMINDER_NEXT_TIME:`Ignorar e não lembrar`,IGNORE_RESUME:`Ignorar e retomar`,PROBLEM_SOLVED_RESUME:`Problema resolvido, retomar`,TURN_OFF_FIRE_ALARM:`Entendido, desligar alarme de incêndio`,RETRY_PROBLEM_SOLVED:`Tentar novamente (problema resolvido)`,CANCLE:`Cancelar`,STOP_DRYING:`Parar secagem`,PROCEED:`Prosseguir`,OK_JUMP_RACK:`OK`,ABORT:`Abortar`,DISABLE_PURIFICATION:`Desativar purificação para esta impressão`,DONT_REMIND_NEXT_TIME:`Não me lembrar`,DBL_CHECK_CANCEL:`Cancelar`,DBL_CHECK_DONE:`Concluído`,DBL_CHECK_RETRY:`Tentar novamente`,DBL_CHECK_RESUME:`Retomar`,DBL_CHECK_OK:`Confirmar`,REMOVE_CLOSE_BTN:`Fechar`}},mqttDebug:{title:`MQTT Log de Depuração`,searchPlaceholder:`Pesquisar tópico ou payload...`,noMessages:`Nenhuma mensagem registrada ainda`,startLoggingHint:`Clique em "Iniciar Registro" para começar a capturar mensagens MQTT`,noMessagesMatch:`Nenhuma mensagem corresponde ao seu filtro`,adjustFilterHint:`Tente ajustar seus critérios de pesquisa ou filtro`,incoming:`Entrada`,outgoing:`Saída`,loggingStopped:`Registro interrompido`,loggingActive:`Registro ativo - as mensagens serão atualizadas automaticamente`,startLogging:`Iniciar Registro`,stopLogging:`Parar Registro`,clearLog:`Limpar Registro`,topic:`ópico`,timestamp:`Carimbo de Data/Hora`,direction:`Direção`,all:`Todos`},printerFiles:{zipStarted_one:`Download ZIP iniciado para {{count}} arquivo`,zipStarted_other:`Download ZIP iniciado para {{count}} arquivos`,zipPartial:`Download ZIP iniciado com {{successful}} de {{total}} arquivos; não foi possível obter os demais`,downloadFailed:`Falha no download: {{error}}`,unknownError:`Erro desconhecido`,shiftSelectHint:`Shift+clique para selecionar um intervalo`,selectFile:`Selecionar {{name}}`,deselectFile:`Desmarcar {{name}}`,title:`Gerenciador de Arquivos`,storageUsed:`Usado:`,storageFree:`Livre:`,filterPlaceholder:`Filtrar arquivos...`,deleteButton:`Excluir`,deleteFiles:`Excluir {{count}} arquivos`,deleteFileConfirm:`Excluir "{{name}}"? Isso não pode ser desfeito.`,deleteFilesConfirm:`Excluir {{count}} arquivos selecionados? Isso não pode ser desfeito.`,noFiles:`Nenhum arquivo na impressora`,printerUnavailable:`O serviço de arquivos da impressora está indisponível. Tente novamente quando a impressora estiver acessível.`,loadingFiles:`Carregando arquivos...`,failedToLoad:`Falha ao carregar arquivos`,toast:{filesDeleted:`Arquivos excluídos: {{count}}`,deleteFailed:`Falha ao excluir: {{error}}`}},confirm:{delete:`Tem certeza de que deseja excluir isso?`,unsavedChanges:`Você tem alterações não salvas. Tem certeza de que deseja sair?`,clearQueue:`Tem certeza de que deseja limpar a fila?`},login:{title:`Login Bambuddy`,subtitle:`Faça login na sua conta`,username:`Nome de usuário`,usernamePlaceholder:`Digite seu nome de usuário`,usernameOrEmail:`Nome de usuário ou Email`,usernameOrEmailPlaceholder:`Nome de usuário ou Email`,password:`Senha`,passwordPlaceholder:`Digite sua senha`,signIn:`Entrar`,signingIn:`Entrando...`,rememberMe:`Lembrar de mim`,forgotPassword:`Esqueceu sua senha?`,autologinFailed:`O login SSO automático falhou. Escolha um provedor abaixo para continuar.`,localDisabledNotice:`O login local está desativado. Use um dos provedores SSO abaixo.`,loginSuccess:`Login realizado com sucesso`,loginFailed:`Falha no login`,enterCredentials:`Por favor, insira nome de usuário e senha`,enterEmail:`Por favor, insira seu endereço de e-mail`,oidcLoginFailed:`Falha no login OIDC`,oidcErrors:{providerError:`O provedor de identidade retornou um erro`,missingParameters:`Parâmetros obrigatórios ausentes no callback OIDC`,invalidState:`Estado OIDC inválido ou já utilizado`,stateExpired:`Sessão OIDC expirada — tente novamente`,providerNotFound:`Provedor OIDC não encontrado`,discoveryFailed:`Falha ao obter o documento de descoberta OIDC`,invalidDiscovery:`Documento de descoberta OIDC inválido`,networkError:`Erro de rede durante a troca de token OIDC`,badResponse:`Resposta inesperada durante a troca de token OIDC`,noIdToken:`O provedor OIDC não retornou um token de ID`,validationFailed:`Falha na validação do token OIDC`,nonceMismatch:`Nonce OIDC não corresponde — possível ataque de replay`,missingSubClaim:`Token OIDC sem claim sub`,noLinkedAccount:`Nenhuma conta local vinculada a esta identidade OIDC`,accountInactive:`Sua conta está inativa`,userResolutionFailed:`Falha ao resolver sua conta`,internalError:`Erro interno durante o login OIDC`,tokenExchangeFailed:`Falha na troca de token OIDC`},forgotPasswordTitle:`Esqueceu a Senha`,forgotPasswordMessage:`Se você esqueceu sua senha, entre em contato com o administrador do sistema para redefini-la.`,forgotPasswordEmailMessage:`Digite seu endereço de email e enviaremos uma nova senha.`,emailAddress:`Endereço de Email`,emailPlaceholder:`seu.email@exemplo.com`,cancel:`Cancelar`,sending:`Enviando...`,sendResetEmail:`Enviar Email de Redefinição`,howToReset:`Como redefinir sua senha:`,resetStep1:`Entre em contato com o administrador do Bambuddy`,resetStep2:`Peça para redefinir sua senha na Gestão de Usuários`,resetStep3:`Eles podem definir uma nova senha temporária para você`,resetStep4:`Faça login com a nova senha e altere-a nas Configurações`,gotIt:`Entendi`,resetPassword:{title:`Definir nova senha`,subtitle:`Digite e confirme sua nova senha abaixo.`,newPassword:`Nova senha`,newPasswordPlaceholder:`Pelo menos 8 caracteres`,confirmPassword:`Confirmar senha`,confirmPasswordPlaceholder:`Repetir nova senha`,saving:`Salvando…`,submit:`Definir nova senha`,backToLogin:`Voltar para o login`,passwordsDoNotMatch:`As senhas não coincidem`,passwordTooShort:`A senha deve ter pelo menos 8 caracteres`,resetFailed:`Falha ao redefinir senha. O link pode ter expirado.`},twoFA:{title:`Autenticação em dois fatores`,subtitle:`Sua conta está protegida com 2FA. Insira o código de verificação abaixo.`,methodAuthenticator:`Aplicativo autenticador`,methodEmail:`Código por e-mail`,methodBackup:`Código de recuperação`,instructionsTotp:`Abra seu aplicativo autenticador e insira o código de 6 dígitos gerado para o Bambuddy.`,instructionsEmail:`Um código de 6 dígitos foi enviado para o seu e-mail. Ele é válido por 10 minutos.`,instructionsEmailNotSent:`Clique no botão abaixo para receber um código de verificação por e-mail.`,instructionsBackup:`Insira um dos seus códigos de recuperação de 8 caracteres. Cada código só pode ser utilizado uma vez.`,sendCodeButton:`Enviar código por e-mail`,sendingCode:`Enviando...`,resendCode:`Reenviar código`,codeLabel:`Código de verificação`,backupCodeLabel:`Código de recuperação`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Verificar`,verifyingButton:`Verificando...`,backToLogin:`← Voltar para o login`,orContinueWith:`ou entrar com`,signInWith:`Entrar com {{provider}}`,enterCode:`Por favor, insira o código de verificação`,sendCodeFailed:`Falha ao enviar o código de verificação`,invalidCode:`Código inválido. Por favor, tente novamente.`}},setup:{title:`Bambuddy Configuração`,subtitle:`Configure a autenticação para sua instância do Bambuddy`,enableAuth:`Ativar Autenticação`,adminAccount:`Conta de Administrador`,adminAccountDesc:`Se usuários administradores já existirem, a autenticação será ativada usando as contas de administrador existentes. Deixe os campos abaixo vazios para usar os administradores existentes ou insira novas credenciais para criar um novo usuário administrador.`,adminUsername:`Nome de usuário do administrador`,adminPassword:`Senha do administrador`,optionalIfAdminExists:`(opcional se usuários administradores existirem)`,adminUsernamePlaceholder:`Digite o nome de usuário do administrador (opcional)`,adminPasswordPlaceholder:`Digite a senha do administrador (opcional)`,confirmPassword:`Confirmar Senha`,confirmPasswordPlaceholder:`Confirme a senha do administrador`,settingUp:`Configurando...`,completeSetup:`Concluir Configuração`,toast:{authEnabledAdminCreated:`Autenticação ativada e usuário administrador criado`,authEnabledExistingAdmins:`Autenticação ativada usando usuários administradores existentes`,setupCompleted:`Configuração concluída`,enterBothCredentials:`Por favor, insira o nome de usuário e a senha do administrador, ou deixe ambos vazios para usar os usuários administradores existentes`,passwordsDoNotMatch:`As senhas não coincidem`,passwordTooShort:`A senha deve ter pelo menos 6 caracteres`}},changePassword:{title:`Alterar Senha`,currentPassword:`Senha Atual`,currentPasswordPlaceholder:`Digite a senha atual`,newPassword:`Nova Senha`,newPasswordPlaceholder:`Digite a nova senha (mínimo 6 caracteres)`,confirmPassword:`Confirmar Senha`,confirmPasswordPlaceholder:`Confirme a nova senha`,passwordsDoNotMatch:`As senhas não coincidem`,passwordTooShort:`A senha deve ter pelo menos 6 caracteres`,changing:`Alterando...`,success:`Senha alterada com sucesso`,failed:`Falha ao alterar a senha`},plateAlert:{title:`Impressão Pausada!`,message:`Objetos detectados na mesa de impressão. A impressão foi automaticamente pausada. Por favor, limpe a mesa e retome a impressão.`,understand:`Entendi`},camera:{title:`Visualização da Câmera`,invalidPrinterId:`ID da impressora inválido`,live:`Ao Vivo`,snapshot:`Captura`,restartStream:`Reiniciar transmissão`,refreshSnapshot:`Atualizar captura`,fullscreen:`Tela Cheia`,exitFullscreen:`Sair da Tela Cheia`,connectingToCamera:`Conectando à câmera...`,capturingSnapshot:`Capturando imagem...`,connectionLost:`Conexão perdida`,connectionFailed:`Falha na conexão com a câmera`,reconnecting:`Reconectando em {{countdown}}s... (tentativa {{attempt}}/{{max}})`,reconnectNow:`Reconectar agora`,cameraUnavailable:`Câmera indisponível`,cameraUnavailableDesc:`Certifique-se de que a impressora está ligada e conectada.`,noCamera:`Nenhuma câmera disponível`,retry:`Tentar novamente`,cameraStream:`Transmissão da câmera`,zoomOut:`Reduzir zoom`,zoomIn:`Aumentar zoom`,resetZoom:`Redefinir zoom`,recording:`Gravando`,startRecording:`Iniciar gravação`,stopRecording:`Parar gravação`,chamberLight:`Alternar luz da câmara`,unavailable:`Câmera indisponível`,diagnose:{button:`Diagnóstico`,modalTitle:`Diagnóstico da câmera`,running:`Executando diagnóstico...`,runFailed:`Não foi possível executar o diagnóstico: {{error}}`,retry:`Executar novamente`,stage:{tcp_reachable:`Conectividade de rede`,first_frame:`Captura de frame`,live_stream_active:`Transmissão ao vivo ativa`},summary:{all_ok:`A câmera está funcionando. O diagnóstico concluiu todas as etapas com sucesso.`,live_stream_active_healthy:`A câmera está transmitindo com frames recentes — nenhum teste necessário.`,printer_unreachable:`Impressora inacessível. Verifique o endereço IP, a conexão de rede e se a impressora está ligada.`,camera_port_closed:`A impressora responde mas a porta da câmera está fechada. Verifique se o modo LAN e o modo desenvolvedor estão ativados nas configurações da impressora.`,no_frame:`Conexão com a câmera estabelecida mas nenhum frame recebido. Tente novamente ou verifique se a câmera está habilitada nas configurações da impressora.`,unknown_failure:`Diagnóstico da câmera falhou por motivo desconhecido. Consulte o log de suporte para mais detalhes.`},meta:{protocol:`Protocolo`,port:`Porta`,profile:`Perfil`}}},groups:{title:`Gerenciamento de Grupos`,subtitle:`Gerenciar grupos de permissão para controle de acesso`,backToSettings:`Voltar para Configurações`,createGroup:`Criar Grupo`,noPermission:`Você não tem permissão para acessar esta página.`,system:`Sistema`,noDescription:`Sem descrição`,usersCount:`{{count}} usuários`,permissionsCount:`{{count}} permissões`,edit:`Editar`,delete:`Excluir`,toast:{created:`Grupo criado com sucesso`,updated:`Grupo atualizado com sucesso`,deleted:`Grupo excluído com sucesso`,enterGroupName:`Por favor, insira um nome para o grupo`},modal:{editGroup:`Editar Grupo`,createGroup:`Criar Grupo`,cancel:`Cancelar`,saving:`Salvando...`,creating:`Criando...`,saveChanges:`Salvar Alterações`},form:{groupName:`Nome do Grupo`,groupNamePlaceholder:`Insira o nome do grupo`,systemGroupWarning:`Os nomes dos grupos do sistema não podem ser alterados`,description:`Descrição`,descriptionPlaceholder:`Insira a descrição (opcional)`,permissions:`Permissões ({{count}} selecionadas)`},deleteModal:{title:`Excluir Grupo`,message:`Tem certeza de que deseja excluir este grupo? Os usuários deste grupo perderão essas permissões.`,confirm:`Excluir Grupo`},editor:{title:`Editar Grupo`,createTitle:`Criar Grupo`,search:`Pesquisar permissões...`,selectAll:`Selecionar Tudo`,clearAll:`Limpar Tudo`,permissionsSelected:`{{count}} selecionada(s)`,noResults:`Nenhuma permissão corresponde à sua pesquisa`,websocketHint:`Necessário para atualizações em tempo real. Sem esta permissão, a interface recorre à sondagem periódica.`}},users:{title:`Gerenciamento de Usuários`,subtitle:`Gerenciar usuários e seu acesso à sua instância do Bambuddy`,backToSettings:`Voltar para Configurações`,createUser:`Criar Usuário`,noPermission:`Você não tem permissão para acessar esta página.`,admin:`Administrador`,noGroups:`Sem grupos`,active:`Ativo`,inactive:`Inativo`,edit:`Editar`,delete:`Excluir`,system:`Sistema`,noGroupsAvailable:`Nenhum grupo disponível`,table:{username:`Nome de Usuário`,groups:`Grupos`,status:`Status`,actions:`Ações`},toast:{created:`Usuário criado com sucesso`,updated:`Usuário atualizado com sucesso`,deleted:`Usuário excluído com sucesso`,fillRequired:`Por favor, preencha todos os campos obrigatórios`,passwordsDoNotMatch:`As senhas não coincidem`,passwordTooShort:`A senha deve ter pelo menos 6 caracteres`,ldapProvisioned:`Usuário LDAP "{{username}}" provisionado`},modal:{createUser:`Criar Usuário`,editUser:`Editar Usuário`,cancel:`Cancelar`,creating:`Criando...`,saving:`Salvando...`,saveChanges:`Salvar Alterações`,advancedAuthSubtitle:`com Autenticação Avançada`,tabsAriaLabel:`Fonte do usuário`,localTab:`Local`,ldapTab:`LDAP`,ldapSearchLabel:`Pesquisar diretório`,ldapSearchPlaceholder:`Digite um nome de usuário, nome ou e-mail...`,ldapMinChars:`Digite ao menos 2 caracteres para pesquisar`,ldapTypeToSearch:`Comece a digitar para pesquisar o diretório LDAP`,ldapSearching:`Pesquisando diretório...`,ldapNoResults:`Nenhum usuário correspondente no diretório`,ldapSearchError:`Falha na pesquisa do diretório. Verifique o status do servidor LDAP.`,ldapAlreadyProvisioned:`Já provisionado`,ldapSelectedLabel:`Selecionado`,ldapProvision:`Provisionar usuário`,ldapProvisioning:`Provisionando...`,ldapErrorProvision:`Falha no provisionamento. Verifique o status do servidor LDAP e tente novamente.`},form:{username:`Nome de Usuário`,usernamePlaceholder:`Insira o nome de usuário`,email:`E-mail`,emailPlaceholder:`user@example.com`,password:`Senha`,passwordPlaceholder:`Insira a senha`,confirmPassword:`Confirmar Senha`,confirmPasswordPlaceholder:`Confirme a senha`,newPasswordPlaceholder:`Insira a nova senha`,confirmNewPasswordPlaceholder:`Confirme a nova senha`,leaveBlankToKeep:`deixe em branco para manter a atual`,groups:`Grupos`,optional:`opcional`,autoGeneratedPassword:`Uma senha segura será gerada automaticamente e enviada por e-mail ao usuário.`,passwordManagedByAdvancedAuth:`A senha é gerenciada pela Autenticação Avançada. Use "Redefinir Senha" para enviar uma nova senha ao usuário por e-mail.`,resetPassword:`Redefinir Senha`,resettingPassword:`Redefinindo Senha...`},deleteModal:{title:`Excluir Usuário`,message:`Tem certeza de que deseja excluir este usuário? Esta ação não pode ser desfeita.`,confirm:`Excluir Usuário`}},streamOverlay:{title:`Sobreposição de stream`,invalidPrinterId:`ID da impressora inválido`,cameraStream:`Transmissão da câmera`,progress:`Progresso da impressão`,eta:`ETA`,printerIdle:`Impressora ociosa`,printerOffline:`Impressora offline`,builder:{title:`Sobreposição de transmissão`,description:`Monta a URL de uma sobreposição de transmissão: a câmera em tela cheia com os dados da impressão sobrepostos, para OBS, um painel de parede ou qualquer fonte de navegador. Escolha os campos e copie a URL.`,printer:`Impressora`,size:`Tamanho do texto`,sizeSmall:`Pequeno`,sizeMedium:`Médio`,sizeLarge:`Grande`,fps:`Taxa de quadros`,fpsHint:`Câmeras A1 e P1 chegam no máximo a cerca de 5 fps, qualquer que seja o valor pedido.`,token:`Token de sobreposição (opcional)`,tokenHint:`Só é necessário com login ativado: o OBS não tem sessão própria. Crie um acima com o escopo Sobreposição de transmissão.`,tokenWarning:`Esta URL contém um token: quem conseguir lê-la pode assistir à transmissão e ver o nome do arquivo. Revogue o token para cortar o acesso.`,fields:`Campos a exibir`,fieldPrinter:`Nome da impressora`,fieldFilename:`Nome do arquivo`,fieldStatus:`Status`,fieldProgress:`Barra de progresso`,fieldLayers:`Contagem de camadas`,fieldEta:`Tempo restante e previsão de término`,fieldCamera:`Imagem da câmera`,chamberHint:`A temperatura da câmara aparece apenas em modelos com sensor real: P1 e A1 informam um valor sem sentido, por isso ela é omitida.`,urlTitle:`URL da sobreposição`,open:`Abrir`,showPreview:`Mostrar prévia`,hidePreview:`Ocultar prévia`,previewTitle:`Prévia da sobreposição`},status:{printing:`Imprimindo`,paused:`Pausado`,finished:`Concluído`,failed:`Falhou`,idle:`Ocioso`,unknown:`Desconhecido`}},profiles:{title:`Perfis`,subtitle:`Gerencie seus presets de fatiador e calibrações de avanço de pressão`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Perfis Locais`,kprofiles:`K-Perfis`},orcaCloud:{connectedAs:`Conectado como`,connectedShort:`Conectado ao Orca Cloud`,logout:`Desconectar`,noLogoutPermission:`Você não tem permissão para desconectar`,noConnectPermission:`Você não tem permissão para conectar ao Orca Cloud`,retry:`Tentar novamente`,connectButton:`Conectar Orca Cloud`,connect:{title:`Conectar ao Orca Cloud`,description:`Entre na sua conta Orca Cloud para sincronizar seus perfis de slicer no Bambuddy.`},device:{title:`Aprovar o Bambuddy no Orca Cloud`,instruction:`Abra o Orca Cloud e aprove este código. O Bambuddy se conecta automaticamente assim que você aprovar.`,codeLabel:`Seu código de pareamento`,openButton:`Abrir a página de aprovação do Orca Cloud`,manualHint:`Ou acesse {{url}} e insira o código acima.`,waiting:`Aguardando sua aprovação…`,cancel:`Cancelar`},profiles:{title:`Seus perfis do Orca Cloud ({{count}})`,refresh:`Atualizar`,empty:`Nenhum perfil encontrado na sua conta Orca Cloud ainda.`},toast:{disconnected:`Desconectado do Orca Cloud`},errors:{startFailed:`Não foi possível iniciar o login do Orca Cloud.`,denied:`O pareamento foi negado no Orca Cloud.`,expired:`O código de pareamento expirou. Clique em Conectar para tentar novamente.`,pollFailed:`A conexão foi perdida enquanto aguardava a aprovação. Tente novamente.`}},localProfiles:{title:`Perfis Locais`,subtitle:`Importe e gerencie presets de fatiador do OrcaSlicer`,import:`Importar Perfis`,importDesc:`Solte arquivos .bbscfg, .bbsflmt, .orca_filament, .zip ou .json aqui`,importing:`Importando...`,search:`Pesquisar presets locais...`,noPresets:`Nenhum preset local ainda`,noSearchResults:`Nenhum preset corresponde à sua busca`,badge:`Local`,edit:`Editar`,delete:`Excluir`,cancel:`Cancelar`,deleteConfirmTitle:`Excluir Preset`,deleteConfirm:`Tem certeza de que deseja excluir este preset? Esta ação não pode ser desfeita.`,source:`Fonte`,inheritsFrom:`Herdado de`,filamentType:`Tipo`,vendor:`Fornecedor`,compatiblePrinters:`Impressoras Compatíveis`,nozzleTemp:`Temperatura do Bico`,cost:`Custo`,density:`Densidade`,pressureAdvance:`Avanço de Pressão`,filament:`Filamento`,process:`Processo`,printer:`Impressora`,toast:{importSuccess:`{{count}} preset(s) importada(s)`,importSkipped:`{{count}} preset(s) ignorada(s) (duplicadas)`,importError:`{{count}} erro(s) durante a importação`,deleted:`Preset excluído`,updated:`Preset atualizado`}},connectedAs:`Conectado como`,signInExpiredTitle:`Sessão do Bambu Cloud expirada`,signInExpiredBody:`A Bambu Lab não aceita mais o token armazenado. Entre novamente para restaurar os perfis na nuvem, as importações do MakerWorld e a verificação de firmware.`,logout:`Sair`,noLogoutPermission:`Você não tem permissão para sair`,failedToLoad:`Falha ao carregar perfis`,retry:`Tentar novamente`,time:{justNow:`Agora mesmo`,minsAgo:`há {{count}} minutos`,hoursAgo:`há {{count}} horas`,daysAgo:`há {{count}} dias`},toast:{loggedOut:`Desconectado`},login:{title:`Conectar ao Bambu Cloud`,subtitle:`Sincronize seus presets de fatiador entre dispositivos`,email:`E-mail`,password:`Senha`,region:`Região`,regionGlobal:`Global`,regionChina:`China`,verificationCode:`Código de Verificação`,totpCode:`Código do Autenticador`,checkEmail:`Verifique seu email ({{email}}) para um código de 6 dígitos`,enterTotpHint:`Digite o código de 6 dígitos do seu aplicativo autenticador`,accessToken:`Token de Acesso`,accessTokenHint:`Cole seu token de acesso da Bambu Cloud. Contas da região China precisam usar este caminho (vinculadas ao celular — login por e-mail indisponível). Veja no wiki como obter o token dos cookies do MakerWorld.`,back:`Voltar`,loginButton:`Entrar`,verifyButton:`Verificar`,setTokenButton:`Definir Token`,useToken:`Usar token de acesso em vez disso`,captchaTitle:`O Bambu Cloud está pedindo um CAPTCHA`,captchaBody:`O Bambu está exigindo um CAPTCHA da sua rede antes de aceitar um login, e esse desafio não pode ser respondido pelo Bambuddy. Seu e-mail e sua senha não são o problema. O bloqueio está ligado ao seu endereço IP público e costuma passar sozinho em algumas horas; tentar de novo repetidamente prolonga o bloqueio. Para entrar agora, use um token de acesso obtido em uma sessão do navegador.`,useEmail:`Entrar com email em vez disso`,toast:{loggedIn:`Conectado com sucesso`,codeSent:`Código de verificação enviado para seu email`,enterTotp:`Digite o código do seu aplicativo autenticador`,tokenSet:`Token definido com sucesso`}},presets:{myPreset:`Meu preset (editável)`,duplicate:`Duplicar`,editable:`Editável`,failedToLoadDetails:`Falha ao carregar detalhes do preset`,deleteConfirm:`Excluir este preset?`,deleteWarning:`Isso excluirá permanentemente "{{name}}" do Bambu Cloud. Esta ação não pode ser desfeita.`,noDuplicatePermission:`Você não tem permissão para duplicar presets`,noEditPermission:`Você não tem permissão para editar presets`,noDeletePermission:`Você não tem permissão para excluir presets`,types:{filament:`Preset de filamento`,printer:`Preset de impressora`,process:`Preset de processo`},toast:{deleted:`Preset excluído`,created:`Preset criado`,updated:`Preset atualizado`,duplicated:`Preset duplicado`,fieldAdded:`Campo "{{key}}" adicionado`,exported:`Preset exportado`},baseLabel:`Base: {{name}}`,currentLabel:`Atual: {{name}}`,newPreset:`Novo Preset`,editPreset:`Editar Preset`,duplicatePreset:`Duplicar Preset`,createNewPreset:`Criar Novo Preset`,customizeSettings:`Personalizar configurações para seu novo preset`,compareWithBase:`Comparar com o preset base`,compare:`Comparar`,basePreset:`Preset Base`,selectBasePreset:`Selecionar preset base...`,presetName:`Nome do Preset`,myCustomPreset:`Meu preset personalizado`,inheritsFrom:`Herdado de`,dropJsonToImport:`Solte o arquivo JSON para importar`,tabs:{common:`Comum`,allFields:`Todos os Campos`},availableFields:`Campos Disponíveis`,searchFieldsPlaceholder:`Pesquisar campos...`,noMatchingFields:`Nenhum campo correspondente`,allFieldsAdded:`Todos os campos adicionados`,addCustomField:`Adicionar campo personalizado`,yourOverrides:`Suas Substituições`,noOverridesYet:`Nenhuma substituição ainda`,clickFieldsToAdd:`Clique nos campos à esquerda para adicioná-los`,saveAsTemplate:`Salvar como modelo`,jsonTip:`Dica: Arraste e solte um arquivo .json em qualquer lugar deste modal para importar configurações`},cloudView:{searchPlaceholder:`Pesquisar presets...`,templates:`Modelos`,refresh:`Atualizar`,newPreset:`Novo Preset`,clearFilters:`Limpar filtros`,compareMode:`Modo de Comparação`,selectAnotherPreset:`Selecionar outro preset {{type}}`,clickTwoPresets:`Clique em dois presets do mesmo tipo para comparar`,selectFirst:`1. Selecionar primeiro`,selectSecond:`2. Selecionar segundo`,compareNow:`Comparar Agora`,lastSynced:`Última sincronização:`,showingCount:`Mostrando {{showing}} de {{total}} presets`,noPresetsFound:`Nenhum preset encontrado`,columns:{filament:`Filamento`,process:`Processo`,printer:`Impressora`},noFilamentPresets:`Nenhum preset de filamento`,noProcessPresets:`Nenhum preset de processo`,noPrinterPresets:`Nenhum preset de impressora`,filters:{type:`Tipo`,owner:`Proprietário`,printer:`Impressora`,nozzle:`Bico`,filament:`Filamento`,layer:`Camada`,all:`Todos`,myPresets:`Meus Presets`,builtIn:`Integrado`,process:`Processo`},noTemplatesPermission:`Você não tem permissão para gerenciar modelos`,noRefreshPermission:`Você não tem permissão para atualizar perfis`,noCreatePermission:`Você não tem permissão para criar presets`},templates:{title:`Modelos Rápidos`,noTemplates:`Nenhum modelo ainda`,createFirst:`Crie modelos a partir do editor de presets`,typeFilter:`Tipo:`,deleteTitle:`Excluir Modelo`,deleteWarning:`Esta ação não pode ser desfeita`,deleteConfirm:`Tem certeza de que deseja excluir "{{name}}"?`,namePlaceholder:`Nome do modelo`,descriptionPlaceholder:`Descrição`,settingsJson:`Configurações (JSON)`,fieldsCount:`{{count}} campos`,shownInModals:`Exibido em modais`,hiddenInModals:`Oculto em modais`,apply:`Aplicar`,toast:{deleted:`Modelo excluído`,updated:`Modelo atualizado`,created:`Modelo criado`,applied:`Modelo aplicado`}}},support:{debugLoggingActive:`Registro de depuração ativo`,manageLogs:`Gerenciar`,collectItem7:`Conectividade da impressora e versões de firmware`,collectItem8:`Status de integração (Spoolman, MQTT, HA)`,collectItem9:`Interfaces de rede (somente sub-redes)`,collectItem10:`Versões de pacotes Python`,collectItem11:`Verificações de integridade do banco de dados`,collectItem12:`Detalhes do ambiente Docker`,bundleGenerating:`Gerando pacote...`,bundleStepConnection:`Executando verificações de conectividade das impressoras`,bundleStepVirtualPrinters:`Executando verificações de configuração das impressoras virtuais`,bundleStepLogScan:`Analisando registros recentes em busca de problemas conhecidos`,bundleStepBuild:`Criando o ZIP do pacote de suporte`},fileManager:{variants:{badge:`{{count}} versões`,groupAction:`Agrupar como versões`,groupTooltip:`Marcar estes arquivos como o mesmo trabalho fatiado para impressoras diferentes`,grouped:`{{count}} arquivos agrupados como versões`,printAlternatives:`Imprimir ({{count}} alternativas)`},title:`Gerenciador de Arquivos`,subtitle:`Organize e gerencie seus arquivos de impressão`,uploadFiles:`Enviar Arquivos`,newFolder:`Nova Pasta`,folderName:`Nome da Pasta`,folderNamePlaceholder:`ex.: Peças Funcionais`,renameFile:`Renomear Arquivo`,renameFolder:`Renomear Pasta`,invalidFilenameChar:`O caractere "{{char}}" não é permitido em nomes de arquivos de impressão. O cartão SD da impressora rejeita: < > : " / \\ | ? *`,moveFiles:`Mover {{count}} Arquivo(s)`,rootNoFolder:`Raiz (Sem Pasta)`,current:`Atual`,linkFolder:`Vincular Pasta`,linkFolderDescription:`Vincular "{{name}}" a um projeto ou arquivo para acesso rápido.`,project:`Projeto`,archive:`Arquivo`,noProjectsFound:`Nenhum projeto encontrado`,noArchivesFound:`Nenhum arquivo encontrado`,unlink:`Desvincular`,link:`Vincular`,dragDropFiles:`Arraste e solte os arquivos aqui`,dropFilesHere:`Solte os arquivos aqui`,releaseToUpload:`Solte para enviar`,orClickToBrowse:`ou clique para procurar`,allFileTypesSupported:`Todos os tipos de arquivos são suportados. Arquivos ZIP serão extraídos.`,zipFilesDetected:`Arquivos ZIP detectados`,zipExtractOptions:`Arquivos ZIP serão extraídos. Escolha como lidar com a estrutura de pastas:`,preserveZipStructure:`Preservar estrutura de pastas do ZIP`,createFolderFromZip:`Criar pasta a partir do nome do arquivo ZIP`,stlThumbnailGeneration:`Geração de miniaturas STL`,zipMayContainStl:`Arquivos ZIP podem conter arquivos STL. Miniaturas podem ser geradas durante a extração.`,thumbnailsCanBeGenerated:`Miniaturas podem ser geradas para arquivos STL. Modelos grandes podem levar mais tempo para processar.`,generateThumbnailsForStl:`Gerar miniaturas para arquivos STL`,threemfDetected:`Arquivos 3MF detectados`,threemfExtractionInfo:`Modelo da impressora, material, cor e configurações de impressão serão extraídos automaticamente dos arquivos 3MF.`,willBeExtracted:`Será extraído`,filesExtracted:`{{count}} arquivos extraídos`,uploadComplete:`Upload concluído: {{succeeded}} bem-sucedidos`,uploadFailed:`Falha no envio`,zipFilesFailed:`{{count}} arquivos falharam`,uploading:`Enviando...`,changeLink:`Alterar link...`,linkTo:`Vincular a...`,linkToProjectOrArchive:`Vincular a projeto ou arquivo`,generateThumbnail:`Gerar miniatura`,generateThumbnails:`Gerar miniaturas`,generateThumbnailsForMissing:`Gerar miniaturas para arquivos STL que não possuem`,gridView:`Visualização em grade`,listView:`Visualização em lista`,lowDiskSpaceWarning:`Aviso de pouco espaço em disco`,lowDiskSpaceDetails:`Apenas {{free}} livres de {{total}} no total. O limite está definido para {{threshold}} GB nas configurações.`,files:`Arquivos`,folders:`Pastas`,size:`Tamanho`,free:`Livre`,allFiles:`Todos os arquivos`,allExternal:`Externos`,externalIsEmpty:`Nenhum arquivo externo`,externalEmptyDescription:`Os arquivos das suas pastas externas vinculadas aparecerão aqui.`,wrap:`Quebrar texto`,enableTextWrapping:`Ativar quebra de texto`,disableTextWrapping:`Desativar quebra de texto`,collapse:`Recolher`,collapseFoldersByDefault:`Recolher pastas por padrão`,expandFoldersByDefault:`Expandir pastas por padrão`,folderSort:`Ordenar pastas`,folderSortByName:`Por nome`,folderSortByActivity:`Por atividade recente`,dragToResizeTooltip:`Arraste para redimensionar, clique duas vezes para redefinir`,searchFiles:`Pesquisar arquivos...`,searchSubfoldersHint:`Incluindo subpastas`,readme:{truncated:`Truncado`,show:`Mostrar README`,hide:`Ocultar README`,label:`README`},tags:{title:`Tags`,subtitle:`Rotule arquivos para filtros transversais — brinquedos, seguro para crianças, somente PETG, o que precisar.`,manage:`Tags`,manageTitle:`Gerenciar catálogo de tags`,add:`Nova tag`,edit:`Renomear tag`,name:`Nome`,fileCount:`Arquivos`,empty:`Ainda não há tags. Crie uma para começar a rotular arquivos.`,noMatches:`Nenhuma tag correspondente.`,createPlaceholder:`ex.: brinquedos, infantil, petg`,createButton:`Criar`,nameRequired:`O nome é obrigatório.`,searchPlaceholder:`Filtrar tags...`,created:`Tag criada.`,updated:`Tag renomeada.`,deleted:`Tag removida.`,saveFailed:`Não foi possível salvar a tag.`,deleteFailed:`Não foi possível remover a tag.`,applyFailed:`Não foi possível aplicar as tags.`,applyAdd:`Adicionar tags`,applyRemove:`Remover tags`,applyAddSuccess:`{{count}} tag(s) adicionada(s) em {{files}} arquivo(s).`,applyRemoveSuccess:`{{count}} tag(s) removida(s) em {{files}} arquivo(s).`,actionAdd:`Adicionar aos arquivos selecionados`,actionRemove:`Remover dos arquivos selecionados`,tagAction:`Marcar`,bulkTitle:`Marcar {{count}} arquivo(s) selecionado(s)`,bulkTooltip:`Adicionar ou remover tags em cada arquivo selecionado.`,noPermission:`Você não tem permissão para marcar arquivos.`,filterLabel:`Filtrando por:`,clearAll:`Limpar tudo`,confirmDelete:`Excluir a tag "{{name}}"?`,confirmDeleteMessage:`Isto remove a tag do catálogo. Os arquivos mantêm as outras tags.`,confirmDeleteInUseMessage:`Esta tag está em {{count}} arquivo(s). Excluí-la remove o chip de todos; os arquivos em si ficam intactos.`,editAria:`Editar {{name}}`,deleteAria:`Excluir {{name}}`},allTypes:`Todos os tipos`,prints:`Impressões`,ascending:`Crescente`,descending:`Decrescente`,showModified:`Mostrar datas de modificação`,hideModified:`Ocultar datas de modificação`,lastModified:`Última modificação`,lastActivity:`Última atividade`,resultsCount:`{{showing}} de {{total}} arquivos`,selectAll:`Selecionar tudo`,deselectAll:`Desmarcar tudo`,selected:`{{count}} selecionado(s)`,adding:`Adicionando...`,loadingFiles:`Carregando arquivos...`,folderIsEmpty:`A pasta está vazia`,noFilesYet:`Nenhum arquivo ainda`,folderEmptyDescription:`Envie arquivos ou mova arquivos para esta pasta para começar.`,noFilesDescription:`Envie arquivos para começar a organizar seus arquivos relacionados à impressão.`,noMatchingFiles:`Nenhum arquivo correspondente`,noMatchingFilesDescription:`Nenhum arquivo corresponde aos seus critérios de pesquisa ou filtro.`,clearFilters:`Limpar filtros`,printedCount:`Impresso {{count}}x`,uploadedBy:`Enviado por`,deleteFolder:`Excluir pasta`,deleteFile:`Excluir arquivo`,deleteFilesCount:`Excluir {{count}} arquivos`,deleteFolderConfirm:`Tem certeza de que deseja excluir esta pasta? Todos os arquivos dentro também serão excluídos.`,deleteFileConfirm:`Tem certeza de que deseja excluir este arquivo?`,deleteFilesConfirm:`Tem certeza de que deseja excluir {{count}} arquivos selecionados? Esta ação não pode ser desfeita.`,deleting:`Excluindo...`,noPermissionRenameFolder:`Você não tem permissão para renomear pastas`,noPermissionLinkFolder:`Você não tem permissão para vincular pastas`,noPermissionDeleteFolder:`Você não tem permissão para excluir pastas`,onlyEmptyFoldersDeletable:`Você só pode excluir pastas vazias`,noPermissionPrint:`Você não tem permissão para imprimir`,noPermissionSlice:`Você não tem permissão para fatiar arquivos`,noPermissionAddToQueue:`Você não tem permissão para adicionar à fila`,noPermissionDownload:`Você não tem permissão para baixar arquivos`,noPermissionPreview:`Você não tem permissão para pré-visualizar arquivos`,preview3d:`Pré-visualização 3D`,noPermissionRenameFile:`Você não tem permissão para renomear este arquivo`,noPermissionGenerateThumbnail:`Você não tem permissão para gerar miniaturas`,noPermissionDeleteFile:`Você não tem permissão para excluir este arquivo`,noPermissionCreateFolder:`Você não tem permissão para criar pastas`,noPermissionUpload:`Você não tem permissão para enviar arquivos`,noPermissionMoveFiles:`Você não tem permissão para mover arquivos`,noPermissionDeleteFiles:`Você não tem permissão para excluir arquivos`,linkExternal:`Vincular externo`,linkExternalFolder:`Vincular pasta externa`,linkExternalFolderDescription:`Montar um diretório do host (NAS, USB, compartilhamento de rede) no Gerenciador de Arquivos. Os arquivos não são copiados — são acessados diretamente do caminho original.`,externalFolderNamePlaceholder:`ex. Impressões NAS`,externalPath:`Caminho do host`,externalPathHelp:`Caminho absoluto do diretório no host Docker. Deve estar montado como bind no contêiner.`,readOnly:`Somente leitura`,readOnlyHelp:`impede uploads e exclusões`,showHiddenFiles:`Mostrar arquivos ocultos (arquivos ponto)`,externalFolder:`Pasta externa`,scanFolder:`Escanear`,toast:{folderCreated:`Pasta criada`,openInSlicerFailed:`Não foi possível abrir no fatiador`,folderDeleted:`Pasta excluída`,fileDeleted:`Arquivo excluído`,filesDeleted:`Excluídos {{count}} arquivos`,filesMoved:`Arquivos movidos`,folderLinked:`Pasta vinculada`,folderUnlinked:`Pasta desvinculada`,externalFolderLinked:`Pasta externa vinculada e escaneada`,folderScanned:`Escaneamento concluído: {{added}} adicionados, {{removed}} removidos`,addedToQueue:`Adicionado {{count}} arquivo(s) à fila`,addedToQueuePartial:`Adicionado {{added}} arquivo(s), {{failed}} falharam`,failedToAddToQueue:`Falha ao adicionar arquivos: {{error}}`,fileRenamed:`Arquivo renomeado`,folderRenamed:`Pasta renomeada`,thumbnailsGenerated:`Geradas {{count}} miniatura(s)`,thumbnailsGeneratedPartial:`Geradas {{succeeded}} miniatura(s), {{failed}} falharam`,noStlMissingThumbnails:`Nenhum arquivo STL sem miniatura`,failedToGenerateThumbnails:`Falha ao gerar miniaturas: {{error}}`,thumbnailGenerated:`Miniatura gerada`,failedToGenerateThumbnail:`Falha ao gerar miniatura: {{error}}`}},projects:{parentLabel:`Projeto principal`,parentNone:`Nenhum (projeto de nível superior)`,parentHint:`Aninhe este projeto em outro para que seus números sejam somados em um projeto mestre`,partOf:`Parte de {{name}}`,subProjectCount:`{{count}} sub-projetos`,subProjectsOf:`Sub-projetos de {{name}}`,collapseSubProjects:`Recolher sub-projetos`,expandSubProjects:`Expandir sub-projetos`,title:`Projetos`,subtitle:`Organize e acompanhe seus projetos de impressão 3D`,newProject:`Novo Projeto`,editProject:`Editar Projeto`,deleteProject:`Excluir Projeto`,projectName:`Nome do Projeto`,description:`Descrição`,noProjects:`Nenhum projeto ainda`,noProjectsFiltered:`Nenhum projeto {{status}}`,noProjectsFilteredHelp:`Você não tem nenhum projeto {{status}}. Os projetos aparecerão aqui quando seu status mudar.`,createFirst:`Crie seu primeiro projeto para começar a organizar impressões relacionadas, acompanhar o progresso e gerenciar suas construções.`,createFirstButton:`Crie Seu Primeiro Projeto`,create:`Criar`,files:`Arquivos`,prints:`Impressões`,plates:`Placas`,parts:`Peças`,lastModified:`Última Modificação`,deleteConfirm:`Tem certeza de que deseja excluir este projeto? Arquivos e itens da fila serão desvinculados, mas não excluídos.`,addFiles:`Adicionar Arquivos`,removeFile:`Remover Arquivo`,viewDetails:`Ver Detalhes`,namePlaceholder:`ex., Voron 2.4 Build`,descriptionPlaceholder:`Descrição opcional...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`A URL deve começar com http:// ou https://`,openExternalUrl:`Abrir URL do projeto`,coverImageLabel:`Imagem de capa`,coverImageAlt:`Imagem de capa do projeto`,coverImageUpload:`Enviar`,coverImageReplace:`Substituir`,coverImageRemove:`Remover`,color:`Cor`,targetPlates:`Placas Alvo`,targetPlatesPlaceholder:`ex., 25`,targetPlatesHelp:`Número de trabalhos de impressão`,targetParts:`Peças Alvo`,targetPartsPlaceholder:`ex., 150`,targetPartsHelp:`Total de objetos necessários`,targetSets:`Cópias por arquivo`,targetSetsPlaceholder:`ex.: 10`,targetSetsHelp:`Quantas vezes cada arquivo imprimível deve ser impresso`,tagsLabel:`Tags (separadas por vírgula)`,tagsPlaceholder:`ex., voron, funcional, presente`,dueDate:`Data de Vencimento`,priority:`Prioridade`,priorityLow:`Baixa`,priorityNormal:`Normal`,priorityHigh:`Alta`,priorityUrgent:`Urgente`,statusActive:`Ativo`,statusCompleted:`Concluído`,statusArchived:`Arquivado`,done:`Concluído`,completed:`Concluído`,failed:`Falhou`,inQueue:`Na fila`,noPrintsYet:`Nenhuma impressão ainda`,printJobs:`Trabalhos de impressão (placas)`,partsPrinted:`Peças impressas`,failedParts:`Peças falhadas`,import:`Importar`,export:`Exportar`,importProject:`Importar projeto`,exportAll:`Exportar todos os projetos`,loading:`Carregando projetos...`,noEditPermission:`Você não tem permissão para editar projetos`,noDeletePermission:`Você não tem permissão para excluir projetos`,noCreatePermission:`Você não tem permissão para criar projetos`,noImportPermission:`Você não tem permissão para importar projetos`,noExportPermission:`Você não tem permissão para exportar projetos`,toast:{created:`Projeto criado`,updated:`Projeto atualizado`,deleted:`Projeto excluído`,imported:`Projeto importado`,multipleImported:`{{count}} projetos importados`,importFailed:`Falha na importação`,exported:`Projetos exportados (apenas metadados)`}},projectDetail:{notFound:`Projeto não encontrado`,backToProjects:`Voltar para Projetos`,export:`Exportar`,exportProject:`Exportar projeto`,noExportPermission:`Você não tem permissão para exportar projetos`,noEditPermission:`Você não tem permissão para editar projetos`,partOf:`Parte de:`,priorityLabel:`Prioridade:`,noPrints:`Nenhuma impressão neste projeto ainda`,status:{active:`Ativo`,completed:`Concluído`,archived:`Arquivado`},priority:{low:`Baixa`,normal:`Normal`,high:`Alta`,urgent:`Urgente`},dueDate:{overdue:`Atrasado`,today:`Vence hoje`,daysLeft:`{{count}} dias restantes`},progress:{platesProgress:`Progresso das Placas`,partsProgress:`Progresso das Peças`,setsProgress:`Conjuntos completos`,sets:`conjuntos`,setsHint:`Um conjunto está completo quando cada arquivo imprimível atinge esse número`,printJobs:`Trabalhos de Impressão`,parts:`Peças`,percentComplete:`{{percent}}% concluído`,remaining:`{{count}} restantes`},stats:{printJobs:`Trabalhos de Impressão`,total:`total`,failed:`{{count}} falhou`,partsPrinted:`{{count}} peças impressas`,printTime:`Tempo de Impressão`,filamentUsed:`Filamento Usado`},cost:{title:`Rastreamento de Custos`,filamentCost:`Custo do Filamento`,energy:`Energia`,totalCost:`Custo Total`,total:`Total`,includesBom:`incl. lista de materiais`,budget:`Orçamento`,remaining:`Restante`},subProjects:{title:`Sub-projetos ({{count}})`,jobs:`{{count}} trabalhos`},rollup:{title:`Incluindo {{count}} sub-projetos`,progress:`Progresso geral`,percentComplete:`{{percent}}% concluído`},notes:{title:`Notas`,noEditPermission:`Você não tem permissão para editar notas`,placeholder:`Adicione notas sobre este projeto...`,empty:`Nenhuma nota ainda. Clique em Editar para adicionar notas.`},files:{title:`Arquivos`,linkFolders:`Vincular pastas do Gerenciador de Arquivos`,forQuickAccess:`a este projeto para acesso rápido.`,fileCount:`{{count}} arquivo(s)`,empty:`Nenhuma pasta vinculada. Vá para o Gerenciador de Arquivos e vincule uma pasta a este projeto.`,printedCount:`Impresso {{count}} vez(es)`,progressTooltip:`{{done}} de {{target}} impressões concluídas`,noFiles:`Nenhum arquivo nesta pasta.`},bom:{title:`Lista de Materiais`,acquired:`{{completed}}/{{total}} adquiridos`,showAll:`Mostrar todos`,hideDone:`Ocultar concluídos`,addPart:`Adicionar Peça`,noAddPermission:`Você não tem permissão para adicionar peças`,partNamePlaceholder:`Nome da peça (ex.: parafusos M3x8)`,partName:`Nome da peça`,qty:`Quantidade`,price:`Preço ({{currency}})`,sourcingUrlPlaceholder:`URL de fornecimento (opcional)`,remarksPlaceholder:`Observações (opcional)`,deletePart:`Excluir Peça`,deleteConfirm:`Tem certeza de que deseja excluir "{{name}}"?`,noUpdatePermission:`Você não tem permissão para atualizar peças`,noEditPermission:`Você não tem permissão para editar peças`,noDeletePermission:`Você não tem permissão para excluir peças`,totalCost:`Custo total:`,empty:`Nenhuma peça na lista de materiais. Adicione hardware, eletrônicos ou outros componentes para rastrear o que precisa ser adquirido.`},timeline:{title:`Linha do Tempo de Atividades`,empty:`Nenhuma atividade ainda.`},template:{saveAsTemplate:`Salvar como Modelo`,noCreatePermission:`Você não tem permissão para criar modelos`},queue:{title:`Fila`,viewAll:`Ver todos`,printing:`{{count}} imprimindo`,queued:`{{count}} na fila`},prints:{title:`Impressões ({{count}})`},toast:{projectUpdated:`Projeto atualizado`,partAdded:`Peça adicionada`,partRemoved:`Peça removida`,exportFailed:`Falha na exportação`,projectExported:`Projeto exportado`,templateCreated:`Modelo criado`}},system:{title:`Informações do Sistema`,version:`Versão`,uptime:`Tempo de Atividade`,cpuUsage:`Uso da CPU`,memoryUsage:`Uso da Memória`,diskUsage:`Uso do Disco`,networkInfo:`Informações de Rede`,logs:`Registros`,debugMode:`Modo de Depuração`,enableDebug:`Ativar Registro de Depuração`,disableDebug:`Desativar Registro de Depuração`,downloadLogs:`Baixar Logs`,clearLogs:`Limpar Logs`,dockerInfo:`Informações do Docker`,containerName:`Nome do Contêiner`,imageName:`Nome da Imagem`,platform:`Plataforma`,architecture:`Arquitetura`},sponsors:{sectionTitle:`Independente e financiado pela comunidade`,tagline:`O Bambuddy é gratuito e continua assim porque há quem escolha apoiá-lo. Sem VC, sem dependência de nuvem.`,viewSupporters:`Ver apoiadores`,toastPrints:`Você concluiu {{count}} impressões com o Bambuddy. O Bambuddy continua gratuito graças a quem o apoia.`,toastCost:`Você acompanhou {{total}} de filamento com o Bambuddy. Veja quem mantém o projeto independente.`,toastArchives:`{{count}} impressões arquivadas com o Bambuddy. Veja quem o mantém independente.`,toastAnniversary:`Um ano com o Bambuddy! Veja quem mantém o projeto independente.`,toastVersionUpdate:`Atualizado para v{{version}}. O Bambuddy continua gratuito graças a quem o apoia.`,toastBusiness:`Você usa o Bambuddy em {{count}} impressoras? Existe um plano de suporte para equipes: correções prioritárias, emissão de nota fiscal e contato direto com o mantenedor.`,businessCta:`Bambuddy para empresas`,businessTitle:`Bambuddy para empresas`,businessTagline:`Você está gerenciando {{count}} impressoras. Suporte prioritário, licenciamento comercial e faturamento estão disponíveis para equipes e fazendas de impressão.`},library:{title:`Biblioteca de Filamentos`,addFilament:`Adicionar Filamento`,editFilament:`Editar Filamento`,deleteFilament:`Excluir Filamento`,vendor:`Fornecedor`,material:`Material`,color:`Cor`,kFactor:`Fator K`,temperature:`Temperatura`,noFilaments:`Nenhum filamento na biblioteca`,deleteConfirm:`Tem certeza de que deseja excluir este filamento?`,importFromPrinter:`Importar da Impressora`,exportToFile:`Exportar para Arquivo`,runWithPipeline:{actionLabel:`Executar com pipeline`,noPermission:`Você não tem permissão para executar pipelines`,modalTitle:`Executar com pipeline`,confirmTitle:`Confirmar execução`,confirmIntro:`A pré-verificação encontrou problemas com esta execução`,sourceHint:`Origem`,pipelineHint:`Pipeline`,targetHint:`Destino`,pipelineListAria:`Pipelines disponíveis`,runAnyway:`Executar mesmo assim`,loading:`Carregando…`,empty:`Ainda não há pipelines salvas. Abra o diálogo Cortar e clique em "Salvar como pipeline" para criar uma.`,noTarget:`Sem impressora de destino`,noTargetMessage:`Esta pipeline não tem impressora de destino. Abra-a em Configurações para escolher uma.`,copies:`Cópias`,copiesHint:`máx {{n}}`,classTarget:`Qualquer {{model}}`,toast:{started:`Execução da pipeline iniciada`,failed:`Não foi possível iniciar a execução`},issue:{printerNotSet:`Sem impressora de destino nesta pipeline.`,printerNotFound:`Impressora de destino não existe mais.`,printerDisabled:`Impressora de destino está desativada.`,printerOffline:`Impressora de destino está offline.`,filamentType:`Slot de filamento {{slot}}: esperado {{expected}}, AMS tem {{actual}}`,filamentColor:`Slot de filamento {{slot}}: cor diferente (esperado {{expected}}, AMS tem {{actual}})`,amsSlotMissing:`Slot AMS {{slot}} indisponível nesta impressora`,filamentUnverified:`Slot de filamento {{slot}} vem de uma predefinição da nuvem / padrão e não pôde ser verificado estaticamente.`,noClassMatches:`Nenhuma impressora nesta instalação corresponde à classe de modelo de destino da pipeline ({{expected}}).`,classNotSet:`O destino da pipeline está configurado como classe de impressora, mas nenhum modelo foi escolhido.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Exibindo os padrões do fatiador: seu sidecar é mais antigo que este recurso e não consegue informar os valores de um perfil. Atualize a imagem do sidecar para vê-los. Tudo o que você não alterar continua usando o perfil.`,presetValuesNotConfigured:`Exibindo os padrões do fatiador: nenhum sidecar está configurado, portanto os valores de um perfil não podem ser lidos. Tudo o que você não alterar continua usando o perfil.`,presetValuesSidecarUnavailable:`Exibindo os padrões do fatiador: o sidecar não respondeu, portanto os valores de um perfil não podem ser lidos. Tudo o que você não alterar continua usando o perfil.`,presetValuesUnavailable:`Exibindo os padrões do fatiador: não foi possível ler os valores do perfil escolhido. Tudo o que você não alterar continua usando o perfil.`,filamentDefault:`Padrão`,fromFile:`do arquivo`,fromFileHint:`O designer alterou isto no arquivo de origem. O valor é {{value}}.`,fromFilePrinterCoupled:`impressora do designer`,fromFilePrinterCoupledHint:`Ajustado para a impressora para a qual este arquivo foi projetado — pode estar errado ou fora de faixa na sua.`,fromFileOverridesPreset:`substitui o perfil`,fromFileOverridesPresetHint:`O arquivo define {{value}} enquanto o perfil escolhido usa {{preset}}. Marque apenas se o arquivo deve prevalecer.`,useFromFile:`Usar o valor do arquivo de origem para {{option}}`,otherFromFile:`Outras configurações deste arquivo`,fromFileSummary:`O designer alterou {{count}} configurações de processo neste arquivo. Só as que você marcar são usadas.`,fromFileUseAll:`Usar as configurações do designer`,fromFileUseAllHint:`Marca as configurações que valem em outras impressoras. As ajustadas para a impressora do designer, e as que definem o preset escolhido, ficam desmarcadas.`,fromFileClear:`Limpar {{count}}`,loading:`Carregando configurações do fatiador…`,mode:{simple:`Simples`,advanced:`Avançado`,expert:`Especialista`},searchPlaceholder:`Buscar configurações`,resetAll:`Redefinir {{count}}`,resetOption:`Redefinir para o padrão`,noMatches:`Nenhuma configuração corresponde a esta busca.`},slice:{filamentSlotUnset:`não definido`,processSettingsEmbedded:`Não é usado enquanto “Usar as configurações internas do arquivo” estiver ativo — as configurações do próprio arquivo conduzem este fatiamento.`,processSettingsInactive:`Inativo`,presetsHidden:`{{count}} ocultos`,showAllPresets:`Mostrar todos`,showFewerPresets:`Mostrar menos`,processSettings:`Configurações de processo`,processSettingsHint:`Ajuste o perfil escolhido para este fatiamento. Tudo o que você não alterar permanece como o perfil define.`,processSettingsChanged:`{{count}} alterados`,processSettingsUnchanged:`Padrões do perfil`,title:`Fatiar modelo`,action:`Fatiar`,actionAll:`Fatiar todas as {{count}} bandejas`,actionAllTitle:`Fatiar todas as bandejas em uma saída multi-bandeja única (um único arquivo). A seleção de filamento cobre cada slot definido pelo projeto.`,allPlatesToggle:`Fatiar todas as {{count}} bandejas`,slicing:`Fatiando…`,printer:`Perfil de impressora`,process:`Perfil de processo`,filament:`Perfil de filamento`,filamentSlot:`Filamento {{index}} ({{type}})`,filamentColour:`Cor do filamento`,selectPreset:`— Selecione uma predefinição —`,loadingPresets:`Carregando predefinições…`,analyzingPlateFilaments:`Analisando filamentos da mesa…`,analyzingPlateFilamentsHint:`Executando uma fatia de pré-visualização para descobrir quais slots AMS esta mesa usa. Cacheado depois — reabrir é instantâneo.`,previewToast:`Analisando {{name}} – {{elapsed}}`,previewWithProgress:`Analisando {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,notUsedByPlate:`— não usado por esta mesa`,noPresetsForSlot:`Nenhuma predefinição disponível`,otherPrinters:`Outras impressoras`,presetsLoadFailed:`Falha ao carregar predefinições. Abra Configurações → Perfis para importá-las primeiro.`,refreshPresets:`Atualizar`,refreshPresetsTitle:`Atualizar predefinições — buscar as listagens mais recentes da nuvem e dos pacotes (use após excluir uma predefinição no Bambu Studio ou Bambu Handy)`,allPresetsRequired:`Todas as predefinições devem ser selecionadas`,useEmbedded:`Usar as configurações incorporadas do arquivo`,useEmbeddedHint:`Fatiar como o designer configurou (paredes, preenchimento, filamento) em vez dos perfis acima. Disponível porque sua impressora corresponde à do arquivo.`,autoOrient:`Orientar os objetos automaticamente`,autoOrientHint:`O fatiador gira cada objeto para o lado que imprime melhor antes de fatiar. Substitui a orientação salva no arquivo.`,autoArrange:`Organizar automaticamente na mesa`,autoArrangeHint:`O fatiador posiciona os objetos para que não se sobreponham. Substitui a disposição do arquivo.`,enqueuing:`Enviando trabalho de fatiamento…`,queued:`Na fila…`,failed:`Falha ao fatiar. Verifique os logs do sidecar.`,startedToast:`Fatiando {{name}} em segundo plano…`,queuedToast:`Na fila: {{name}} – {{elapsed}}`,runningToast:`Fatiando {{name}} – {{elapsed}}`,runningWithProgress:`{{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,runningWithProgressMultiPlate:`Bandeja {{plateIndex}} de {{plateCount}} • {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,completedToast:`{{name}} fatiado`,externalWriteFallbackToast:`Salvo na biblioteca interna: não foi possível gravar na pasta externa`,failedTitle:`Falha ao fatiar`,failedToast:`Falha ao fatiar {{name}}: {{detail}}`,tier:{local:`Importado`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Padrão`},cloud:{notAuthenticated:`Faça login no Bambu Cloud (Configurações → Perfis → Bambu Cloud) para ver as predefinições.`,expired:`Sessão do Bambu Cloud expirou – faça login novamente para atualizar as predefinições.`,unreachable:`Bambu Cloud está inacessível agora. Predefinições locais e padrão ainda funcionam.`},orcaCloud:{notAuthenticated:`Entre no Orca Cloud (Perfis → Orca Cloud) para ver seus presets Orca.`,expired:`Sessão do Orca Cloud expirada — entre novamente para atualizar seus presets Orca.`,unreachable:`Orca Cloud está indisponível no momento. Outros presets continuam funcionando.`},bedType:{label:`Mesa de impressão`,auto:`Auto (usar predefinição de processo)`,coolPlate:`Cool Plate`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`},pipelines:{label:`Pipeline`,applyAria:`Aplicar pipeline`,applyPrompt:`Aplicar pipeline…`,empty:`Nenhuma pipeline salva`,saveButton:`Salvar como pipeline`,saveTitle:`Salvar a seleção atual dos quatro slots como uma pipeline reutilizável`,namePlaceholder:`Nome da pipeline`,nameAria:`Novo nome de pipeline`,toast:{applied:`"{{name}}" aplicada`,saved:`Pipeline salva`,saveFailed:`Falha ao salvar`}}},spoolman:{title:`Integração com Spoolman`,enabled:`Spoolman Ativado`,url:`URL do Spoolman`,connected:`Conectado`,disconnected:`Não Conectado`,testConnection:`Testar Conexão`,sync:`Sincronizar`,syncing:`Sincronizando...`,lastSync:`Última Sincronização`,linkToSpoolman:`Vincular ao Spoolman`,openInSpoolman:`Abrir no Spoolman`,unlinkSpool:`Desvincular Carretel`,unlinkConfirmTitle:`Remover atribuição do carretel?`,unlinkConfirmMessage:`Isso removerá o carretel deste slot. Os dados do próprio carretel permanecerão inalterados.`,selectSpool:`Selecionar Carretel`,noUnlinkedSpools:`Nenhum carretel não atribuído disponível`,linkSuccess:`Carretel atribuído com sucesso`,linkFailed:`Falha ao atribuir carretel`,unlinkSuccess:`Atribuição do carretel removida com sucesso`,unlinkFailed:`Falha ao remover atribuição do carretel`,linkedSpool:`Carretel atribuído`,spoolId:`Carretel ID (Spool ID)`,fillSourceLabel:`(Spoolman)`,weight:`Peso`,remaining:`Restante`,disableWeightSync:`Desativar Sincronização de Peso Estimado do AMS`,disableWeightSyncDesc:`Não atualize a capacidade restante a partir das estimativas do AMS. Use isso se preferir o rastreamento de uso do Spoolman em vez das estimativas baseadas em porcentagem do AMS. Novos carretéis ainda usarão a estimativa do AMS como seu peso inicial.`,reportPartialUsage:`Relatar Uso Parcial para Impressões Falhadas`,reportPartialUsageDesc:`Quando uma impressão falha ou é cancelada, relate o filamento estimado usado até aquele ponto com base no progresso das camadas.`},locations:{title:`Locais de armazenamento`,subtitle:`Gerencie prateleiras, gavetas e outros locais físicos para bobinas`,add:`Adicionar local`,addShort:`Adicionar`,edit:`Editar local`,name:`Nome`,spools:`Bobinas`,sensors:`Sensores`,empty:`Nenhum local de armazenamento. Crie sua primeira prateleira ou gaveta.`,manage:`Locais`,createPlaceholder:`ex. Prateleira A, Gaveta 1`,nameRequired:`O nome do local é obrigatório`,created:`Local criado`,updated:`Local atualizado`,deleted:`Local excluído`,saveFailed:`Falha ao salvar local`,deleteFailed:`Falha ao excluir local`,deleteBlocked:`Remova todas as bobinas deste local antes de excluir`,confirmDelete:`Excluir «{{name}}»?`,confirmDeleteMessage:`Este local será removido do catálogo. Mova as bobinas primeiro.`,confirmDeleteMessageWithSensors:`Este local será removido do catálogo. Mova as bobinas primeiro. Os sensores conectados também serão excluídos.`},inventory:{title:`Inventário de Carretéis`,subtitle:`Gerencie seus carretéis`,addToInventory:`Adicionar ao Inventário`,addToInventoryPending:`Adicionando...`,addToInventorySuccess:`Carretel adicionado ao inventário`,addToInventoryFailed:`Falha ao adicionar carretel ao inventário`,unknownSpoolTitle:`Novo filamento detectado`,unknownSpoolMessage:`Um carretel com tag RFID desconhecido foi detectado em {{location}}. Adicioná-lo ao seu inventário agora?`,unknownSpoolSlot:`Slot`,bulk:{selectAllVisible:`Selecionar todos os visíveis`,selectRow:`Selecionar linha`,selectGroup:`Selecionar grupo`,selectionCount:`{{count}} selecionados`,edit:`Editar`,printLabels:`Imprimir etiquetas`,resetUsage:`Redefinir uso`,restore:`Restaurar`,archive:`Arquivar`,delete:`Excluir`,clearSelection:`Limpar seleção`,editTitle:`Editar carretéis em massa`,editSubtitle:`Aplica-se a {{count}} carretéis selecionados. Apenas os campos marcados serão atualizados.`,editHint:`Digite em um campo para marcá-lo para atualização — apenas linhas marcadas são enviadas. Deixar um campo vazio mantém os carretéis inalterados (limpar campos só é feito por carretel).`,useCustom:`Usar "{{value}}"`,toggleField:`Ativar atualização deste campo`,changeCount:`{{count}} campos serão atualizados.`,applyPending:`Aplicando...`,applyButton:`Aplicar a {{count}} carretéis`,deleteTitle:`Excluir carretéis selecionados`,archiveTitle:`Arquivar carretéis selecionados`,restoreTitle:`Restaurar carretéis selecionados`,resetUsageTitle:`Redefinir uso dos carretéis selecionados`,deleteMessage:`Excluir permanentemente {{count}} carretéis? Esta ação não pode ser desfeita.`,archiveMessage:`Arquivar {{count}} carretéis? Eles podem ser restaurados depois.`,restoreMessage:`Restaurar {{count}} carretéis arquivados?`,resetUsageMessage:`Redefinir o contador "Total Consumido" em {{count}} carretéis? O peso restante é preservado.`,updateSuccess:`{{count}} carretéis atualizados`,updateFailed:`Atualização em massa falhou`,updatePartial:`{{ok}} carretéis atualizados, {{failed}} falharam`,updateAllFailed:`Todas as {{count}} atualizações falharam — a seleção é mantida para nova tentativa`,deleteSuccess:`{{count}} carretéis excluídos`,deleteFailed:`Exclusão em massa falhou`,deletePartial:`{{ok}} carretéis excluídos, {{failed}} falharam`,deleteAllFailed:`Todas as {{count}} exclusões falharam — a seleção é mantida para nova tentativa`,archiveSuccess:`{{count}} carretéis arquivados`,archiveFailed:`Arquivamento em massa falhou`,archivePartial:`{{ok}} carretéis arquivados, {{failed}} falharam`,archiveAllFailed:`Todos os {{count}} arquivamentos falharam — a seleção é mantida para nova tentativa`,restoreSuccess:`{{count}} carretéis restaurados`,restoreFailed:`Restauração em massa falhou`,restorePartial:`{{ok}} carretéis restaurados, {{failed}} falharam`,restoreAllFailed:`Todas as {{count}} restaurações falharam — a seleção é mantida para nova tentativa`,invalidHex:`Digite 6 caracteres hex (RRGGBB) ou 8 (RRGGBBAA). Caso contrário o campo não será aplicado.`},spoolmanMixedContentTitle:`Spoolman não pode carregar em HTTPS — conteúdo misto bloqueado pelo navegador`,spoolmanMixedContentBody:`O Bambuddy é servido via HTTPS (pelo seu reverse proxy), mas a URL do Spoolman ainda é HTTP. Os navegadores bloqueiam conteúdo misto por segurança, então a interface embutida do Spoolman não consegue carregar. O Spoolman também precisa estar acessível via HTTPS.`,spoolmanMixedContentFixReverseProxy:`Coloque o Spoolman atrás do mesmo reverse proxy do Bambuddy (Traefik / Nginx / Caddy) com HTTPS e atualize a URL do Spoolman em Configurações com o novo endereço HTTPS.`,spoolmanMixedContentFixOpenNewTab:`Como alternativa, abra o Spoolman em uma nova aba via HTTP — as regras de conteúdo misto só se aplicam a frames embutidos, uma aba independente funciona normalmente.`,spoolmanOpenInNewTab:`Abrir Spoolman em nova aba`,labels:{title:`Imprimir etiquetas de bobinas`,selectedCount:`{{count}} selecionado`,pickSpools:`Escolha para quais bobinas imprimir etiquetas:`,monochrome:`Monocromático (impressora preto e branco)`,monochromeHint:`Remove a amostra de cor e amplia o texto`,startingPosition:`Posição inicial da etiqueta`,startingPositionRange:`Somente modelos em folha: L7160 aceita 1–21; 5160 aceita 1–30.`,startingPositionInvalid:`Digite um número inteiro de 1 a {{capacity}}.`,startingPositionFirst:`A impressão começa na posição 1.`,startingPositionSkipped:`As posições de 1 a {{lastPosition}} ficarão vazias na primeira folha.`,startingPositionRangeError:`A posição inicial deve estar entre 1 e {{capacity}} para esta folha.`,searchPlaceholder:`Buscar por nome, marca ou #ID`,filterByMaterial:`Material:`,allMaterials:`Tudo`,selectVisible:`Selecionar todos visíveis ({{count}})`,deselectVisible:`Desmarcar visíveis`,clearAll:`Limpar tudo`,noSpoolsToShow:`Nenhuma bobina para mostrar. Ajuste o filtro e tente novamente.`,noMatches:`Nenhuma bobina corresponde à pesquisa ou filtro atual.`,printOne:`Imprimir etiqueta desta bobina`,printLabels:`Imprimir etiquetas…`,bulkTitle:`Escolha bobinas para etiquetar entre as {{count}} exibidas`,noSpoolsTitle:`Nenhuma bobina para rotular`,error:`Não foi possível gerar etiquetas: {{msg}}`,sortBy:{label:`Ordenar:`,id:`Por ID`,color:`Por cor`},templates:{amsHolderSmall:{label:`Suporte AMS — pequeno (74 × 33 mm)`,hint:`Uma etiqueta por página; corresponde à etiqueta imprimível do modelo MakerWorld 752566 (Suporte de etiquetas de filamento AMS).`},amsHolderLarge:{label:`Suporte AMS — grande (75 × 55 mm)`,hint:`Uma etiqueta por página; encaixa na variante com inserto em cartão do Suporte de etiquetas de filamento AMS. Espaço suficiente para amostra de cor, marca, material, ID e QR code.`},box40x30:{label:`Etiqueta de caixa (40 × 30 mm)`,hint:`Uma etiqueta por página; tamanho comum de rolo DK/Brother, ideal para etiquetar sacos de filamento e caixas de armazenamento.`},box:{label:`Box label (62 × 29 mm)`,hint:`Uma etiqueta por página; tamanho para Brother PT/QL e etiquetas pequenas Dymo.`},averyL7160:{label:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,hint:`Formato de folha UE; 21 etiquetas por página A4.`},avery5160:{label:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,hint:`Formato de folha US; 30 etiquetas por página Letter.`}}},csv:{importButton:`Importar CSV`,exportButton:`Exportar CSV`,modalTitle:`Importar carretéis de CSV`,selectFile:`Escolha um arquivo CSV ou arraste-o aqui`,dragHint:`Cabeçalho: material (obrigatório), brand, subtype, color_name, rgba, …`,parsing:`Lendo arquivo…`,previewError:`Não foi possível ler o arquivo CSV`,validCount:`{{count}} válidos`,errorCount:`{{count}} com erro`,skippedCount:`{{count}} ignorados`,colRow:`Linha`,colStatus:`Status`,colColor:`Cor`,colorResolved:`Cor preenchida pelo catálogo`,colorCrossMaterial:`Cor obtida de um material diferente — sem correspondência exata no catálogo`,duplicateExisting:`Já existe uma bobina com este material, marca e cor — ela será importada mesmo assim como uma nova bobina`,spoolmanHint:`No modo Spoolman, use a importação/exportação CSV integrada do Spoolman.`,importValidRows:`Importar {{count}} linhas válidas`,noValidRows:`Nenhuma linha válida`,importing:`Importando…`,importSuccess:`{{count}} carretéis importados`,importError:`Falha na importação`,exportError:`Falha na exportação`},addSpool:`Adicionar Carretel`,editSpool:`Editar Carretel`,copySpool:`Copiar Carretel`,material:`Material`,selectMaterial:`Selecionar material...`,subtype:`Subtipo`,brand:`Marca`,searchBrand:`Pesquisar marca...`,useCustomBrand:`Usar "{{brand}}"`,useCustomMaterial:`Usar material personalizado: {{material}}`,suggestedOptions:`Sugeridos`,allOptions:`Todos`,colorName:`Nome da Cor`,colorNamePlaceholder:`Branco Jade, Vermelho Fogo...`,color:`Cor`,hexColor:`Cor Hexadecimal`,pickColor:`Escolher cor personalizada`,labelWeight:`Peso da Etiqueta`,coreWeight:`Peso do Carretel Vazio`,searchSpoolWeight:`Pesquisar peso do carretel...`,weightUsed:`Usado`,currentWeight:`Peso Restante`,measuredWeight:`Peso Medido`,spoolName:`Bobina`,costPerKg:`Custo por kg`,storageLocation:`Local de armazenamento`,temperature:`Temperatura`,humidity:`Umidade`,battery:`Bateria`,storageLocationPlaceholder:`ex. Prateleira A, Gaveta 1`,openInInventory:`Abrir no inventário`,measuredWeightError:`O peso medido deve estar entre {{min}}g e {{max}}g.`,slicerFilament:`Filamento do Fatiador`,slicerFilamentName:`Nome do Predefinido do Fatiador`,slicerPreset:`Predefinido do Fatiador`,searchPresets:`Pesquisar predefinições de filamento...`,selectedPreset:`Selecionado`,noPresetsFound:`Nenhuma predefinição encontrada`,tempOverrides:`Substituições de Temperatura`,note:`Nota`,notePlaceholder:`Quaisquer notas adicionais sobre este spool...`,category:`Categoria`,categoryPlaceholder:`ex. Produção, Protótipo, Cliente A`,categoryNone:`Sem categoria`,storageLocationNone:`Sem local definido`,lowStockThresholdOverride:`Limite de estoque baixo (este carretel)`,lowStockThresholdOverrideHelp:`Deixe em branco para usar o limite global ({{global}}%).`,clearRfid:`Limpar tag RFID`,rfidCleared:`Tag RFID limpa`,archive:`Arquivar`,restore:`Restaurar`,noSpools:`Nenhum carretel ainda. Adicione seu primeiro carretel para começar.`,noAvailableSpools:`Nenhum carretel disponível. Adicione um carretel ao seu inventário ou desatribua um de outro slot primeiro.`,kProfiles:`K-Perfis`,addKProfile:`Adicionar K-Perfil`,assignSpool:`Atribuir Carretel`,unassignSpool:`Desatribuir`,assignSuccess:`Carretel atribuído e slot AMS configurado`,assignPendingInsert:`Atribuído. O slot será configurado quando você inserir o carretel.`,assignFailed:`Falha ao atribuir carretel`,selectSpool:`Selecione um carretel para atribuir a este slot`,assigned:`Atribuído`,assigning:`Atribuindo...`,searchSpools:`Pesquisar carretéis...`,showAllSpools:`Mostrar todos os carretéis`,spoolmanSpools:`Bobinas Spoolman`,allMaterials:`Todos os Materiais`,filterByBrand:`Filtrar por marca...`,showArchived:`Mostrar arquivados`,quickAdd:`Adição rápida (Estoque)`,quantity:`Quantidade`,stock:`Estoque`,configured:`Configurado`,spoolsCreated:`{{count}} carretéis criados`,spoolsPartiallyCreated:`{{created}} de {{total}} carretéis criados (alguns falharam)`,spoolCreated:`Carretel criado`,spoolUpdated:`Carretel atualizado`,spoolDeleted:`Carretel excluído`,deepLinkSpoolNotFound:`Carretel não encontrado`,deepLinkFetchFailed:`Não foi possível carregar o carretel — tente novamente`,spoolArchived:`Carretel arquivado`,spoolRestored:`Carretel restaurado`,kProfileSaveFailed:`Não foi possível salvar as configurações do perfil K`,syncWeightSpoolNotFound:`Carretel não encontrado — pode ter sido excluído`,syncWeightSpoolmanUnreachable:`Spoolman está inacessível — tente novamente mais tarde`,syncWeightFailed:`Falha ao sincronizar o peso`,spoolmanUnreachable:`Spoolman está inacessível — tente novamente mais tarde`,deleteSpoolNotFound:`Carretel não encontrado — pode já ter sido excluído`,deleteFailed:`Falha ao excluir carretel`,archiveSpoolNotFound:`Carretel não encontrado — pode já ter sido excluído`,archiveFailed:`Falha ao arquivar carretel`,restoreSpoolNotFound:`Carretel não encontrado — pode já ter sido excluído`,restoreFailed:`Falha ao restaurar carretel`,saveFailed:`Falha ao salvar as alterações`,tagClearFailed:`Falha ao limpar a tag`,deleteConfirm:`Tem certeza de que deseja excluir este carretel? Esta ação não pode ser desfeita.`,archiveConfirm:`Tem certeza de que deseja arquivar este carretel?`,advancedSettings:`Configurações Avançadas`,filamentInfoTab:`Informações do Filamento`,paProfileTab:`Perfil PA`,colorAndCostTab:`Cor e custo`,printersTab:`Impressoras`,filamentInfo:`Filamento`,additional:`Adicional`,loadingPresets:`Carregando predefinições da nuvem...`,cloudConnected:`Nuvem conectada`,cloudNotConnected:`Nuvem não conectada (usando padrões)`,recentColors:`Recentes`,searchColors:`Pesquisar cores...`,searchResults:`Resultados da pesquisa`,allColors:`Todas as cores`,commonColors:`Cores comuns`,showLess:`Mostrar menos`,showAll:`Mostrar tudo`,noColorsFound:`Nenhuma cor corresponde à sua pesquisa`,noResults:`Nenhum resultado encontrado`,extraColorsLabel:`Cores extras`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Cole 2 a 8 paradas hex, separadas por vírgulas. Renderizado como gradiente.`,extraColorsInvalid:`Hex inválidos ignorados: {{tokens}}`,colorEffectLabel:`Efeito`,colorEffect:{none:`Nenhum`,sparkle:`Brilho`,wood:`Madeira`,marble:`Mármore`,glow:`Brilho`,matte:`Fosco`,silk:`Silk`,galaxy:`Galáxia`,rainbow:`Arco-íris`,metal:`Metal`,translucent:`Translúcido`,gradient:`Gradiente`,dualColor:`Dupla cor`,triColor:`Tricolor`,multicolor:`Multicolor`},selectMaterialFirst:`Por favor, selecione um material primeiro na aba Informações do Filamento.`,noPrintersConfigured:`Nenhuma impressora configurada. Adicione impressoras para usar perfis PA.`,matchingFilter:`Correspondente`,anyBrand:`Qualquer marca`,anyVariant:`Qualquer variante`,autoSelect:`Seleção automática`,matches:`correspondências`,match:`correspondência`,noMatches:`Nenhuma correspondência`,connected:`Conectado`,offline:`Offline`,printerOffline:`A impressora está offline. Conecte-se para visualizar os perfis de calibração.`,noKProfilesMatch:`Nenhum K-perfil corresponde ao filamento selecionado.`,leftNozzle:`Bico Esquerdo`,rightNozzle:`Bico Direito`,profilesSelected:`perfil(is) de calibração selecionado(s)`,filamentPreset:`Predefinição de filamento`,presetUseSpoolDefault:`Usar a predefinição do carretel`,presetInherited:`herdada`,presetOverride:`personalizada`,presetNeedsModel:`Esta impressora ainda não informou o modelo, portanto não pode ter uma predefinição própria.`,autoMatchPresets:`Associar automaticamente`,autoMatchPresetsHint:`Encontrar a variante da predefinição do carretel que nomeia cada modelo`,kProfilesPerPrinter:`Perfis K`,kProfileNotSet:`Não definido`,kProfileFlowMismatch:`Este perfil foi medido com um bico {{profile}}, mas há um bico {{fitted}} instalado, portanto não será aplicado`,nozzle:`Bico`,unknownModel:`Modelo desconhecido`,onePrinter:`1 impressora`,nPrinters:`{{n}} impressoras`,filamentPresetsLoadFailed:`Não foi possível carregar as predefinições por modelo deste carretel`,filamentPresetSaveFailed:`Não foi possível salvar as predefinições por modelo`,totalInventory:`Inventário Total`,totalConsumed:`Total Consumido`,byMaterial:`Por Material`,inPrinter:`Na Impressora`,lowStock:`Estoque Baixo`,sinceTracking:`Desde o início do rastreamento`,resetConsumedCounter:`Zerar contador`,resetConsumedCounterTooltip:`Zerar o contador de gramas consumidas desta bobina. O peso restante não é alterado.`,resetConsumedCounterConfirm:`Zerar o contador de gramas consumidas desta bobina? As impressões futuras voltarão a contar do zero. A bobina em si, o cálculo do peso restante e as configurações não são alterados.`,resetAllConsumedCounters:`Zerar todos os contadores`,resetAllConsumedCountersTooltip:`Zerar o contador de gramas consumidas em todas as bobinas. Os pesos restantes não são alterados.`,resetAllConsumedCountersConfirm:`Zerar o contador de gramas consumidas nas {{count}} bobinas (incluindo as arquivadas)? Isso limpa o "Total Consumido" para que as impressões futuras contem do zero. Bobinas e pesos restantes não são alterados.`,consumedCounterReset:`Contador zerado`,allConsumedCountersReset:`Contador zerado em {{count}} bobina(s)`,resetConsumedCounterFailed:`Falha ao zerar o contador`,loadedInAms:`Carregado no AMS/Ext`,remaining:`Restante`,weightCheck:`Verificação de Peso`,lastWeighed:`Última pesagem`,neverWeighed:`Nunca pesado`,search:`Pesquisar carretéis...`,showing:`Mostrando`,to:`até`,of:`de`,show:`Mostrar`,spools:`carretéis`,spool:`carretel`,page:`Página`,noSpoolsMatch:`Nenhum resultado encontrado`,noSpoolsMatchDesc:`Tente ajustar sua pesquisa ou filtros para encontrar o que você está procurando.`,active:`Ativo`,archived:`Arquivado`,all:`Todos`,used:`Usado`,new:`Novo`,clearFilters:`Limpar filtros`,table:`Tabela`,cards:`Cartões`,net:`Líquido`,groupSimilar:`Agrupar`,groupedSpools:`{{count}} carretéis idênticos`,groupedRows:`linhas`,columns:`Colunas`,configureColumns:`Configurar Colunas`,configureColumnsDesc:`Arraste para reordenar as colunas ou use as setas. Alterne a visibilidade com o ícone de olho.`,visible:`Visível`,reset:`Redefinir`,cancel:`Cancelar`,applyChanges:`Aplicar Alterações`,moveUp:`Mover para cima`,moveDown:`Mover para baixo`,hideColumn:`Ocultar coluna`,showColumn:`Mostrar coluna`,linkToSpool:`Vincular ao Carretel`,tagLinked:`Tag vinculada ao carretel`,tagLinkFailed:`Falha ao vincular tag`,tagAlreadyLinked:`Tag já vinculada ao carretel #{{id}}`,unknownTag:`Tag RFID desconhecida detectada`,usageHistory:`Histórico de Uso`,noUsageHistory:`Nenhum uso registrado ainda`,printName:`Nome da Impressão`,weightConsumed:`Peso Consumido`,clearHistory:`Limpar`,historyCleared:`Histórico de uso limpo`,fillSourceLabel:`(Inv)`,lowStockThresholdError:`O limite deve estar entre 0.1 e 99.9`,assignMismatchTitle:`Incompatibilidade de material`,assignMismatchMessage:`O material do carretel selecionado "{{spoolMaterial}}" não corresponde ao material da bandeja "{{trayMaterial}}" para {{location}}. Atribuir mesmo assim?`,assignMismatchConfirm:`Atribuir mesmo assim`,assignPartialMismatchMessage:`O material do carretel "{{spoolMaterial}}" é semelhante, mas não corresponde exatamente a "{{trayMaterial}}" em {{location}}. Deseja prosseguir?`,assignProfileMismatchMessage:`O perfil do carretel "{{spoolProfile}}" não corresponde ao perfil da bandeja "{{trayProfile}}" em {{location}}. Deseja prosseguir?`,assignReconfigureNote:`O slot do AMS será reconfigurado para usar o perfil do carretel.`,spoolmanFilamentCatalog:`Catálogo de filamentos Spoolman`,pickFromSpoolmanCatalog:`Escolher do catálogo Spoolman…`,spoolmanFilamentSelected:`Filamento selecionado do catálogo Spoolman`,spoolmanFilamentUnlinked:`Vínculo com o catálogo de filamentos removido`,noSpoolmanFilaments:`Nenhum filamento encontrado no catálogo Spoolman`,spoolmanFilamentColorSwatch:`Cor do filamento`,spoolWeightManagedBySpoolman:`O peso do carretel vazio é gerenciado por tipo de filamento no Spoolman`,spoolmanCatalogLoadFailed:`Falha ao carregar catálogo de filamentos do Spoolman`},timelapse:{title:`Timelapse`,create:`Criar Timelapse`,download:`Baixar`,delete:`Excluir`,preview:`Visualizar`,frameRate:`Taxa de Quadros`,quality:`Qualidade`,processing:`Processando...`,noTimelapses:`Nenhum timelapse disponível`},ams:{title:`AMS`,slot:`Slot`,empty:`Vazio`,emptySlot:`Slot vazio`,slotEmpty:`Vazio`,slotUnconfigured:`?`,emptySlotReset:`Nenhum carretel atribuído`,unknown:`Desconhecido`,humidity:`Umidade`,temperature:`Temperatura`,filamentType:`Tipo de Filamento`,filamentColor:`Cor`,remaining:`Restante`,history:`Histórico do AMS`,noHistory:`Nenhum histórico disponível`,configureSlot:`Configurar Slot`,externalSpool:`Carretel Externo`,profile:`Perfil`,kFactor:`Fator K`,kFactorShort:`K`,fill:`Preencher`,configure:`Configurar`,used:`usado`,remainingUnit:`restante`},printModal:{variants:{editNote:`Estas alternativas foram definidas ao enfileirar o trabalho. Cancele e enfileire de novo para alterá-las.`,title:`Alternativas de impressora`,help:`Um trabalho, uma vaga na fila. A primeira impressora compatível que ficar livre imprime o arquivo dela.`,unknownModel:`Modelo desconhecido`,plateFor:`Mesa para {{filename}}`,moveUp:`Mover para cima`,moveDown:`Mover para baixo`,queued:`Na fila com {{count}} alternativas`},selectPrinter:`Selecionar Impressora`,selectPlate:`Selecionar Placa`,filamentMapping:`Mapeamento de Filamento`,useArchiveMapping:`Mapeamento`,useArchiveMappingTooltip:`Selecionar todos os slots a partir do mapeamento de AMS salvo com este arquivo (do fatiador), em vez de corresponder por tipo/cor.`,clickToChangeSlot:`Clique para alterar a atribuição do slot`,reRead:`Reler`,plateN:`Placa {{n}}`,plateFilamentsUnreadable:`Não foi possível ler os filamentos de uma placa selecionada, portanto ela não pode ser mapeada. Desmarque-a para enfileirar as demais.`,totalCost:`Custo total:`,slotRemainingShort:` - {{grams}}g rest.`,printSettings:`Configurações de Impressão`,bedLeveling:`Nivelamento da Mesa`,flowCalibration:`Calibração de Fluxo`,vibrationCalibration:`Calibração de Vibração`,layerInspection:`Inspeção da Primeira Camada`,timelapse:`Timelapse`,cancel:`Cancelar`,noPrintersAvailable:`Nenhuma impressora disponível`,printerBusy:`Impressora ocupada`,printerOffline:`Impressora offline`,sameTypeDifferentColor:`Mesmo tipo, cor diferente`,filamentTypeNotLoaded:`Tipo de filamento não carregado`,statusReady:`Pronto`,statusColorMismatch:`Cor diferente`,statusTypeNotFound:`Tipo não encontrado`,requiredTooltip:`Necessário: {{name}} - {{color}}`,manuallySelected:`Selecionado manualmente`,autoMatched:`Correspondido automaticamente`,selectSlot:`Escolher slot`,exactColorMatch:`Correspondência exata de cor`,slotForFilament:`Slot da impressora para {{name}}`,overrideForFilament:`Substituição de filamento para {{name}}`,sameTypeDifferentColorDetail:`Mesmo tipo, cor diferente: precisa de {{required}}, o slot tem {{loaded}}`,requiredTypeNotInPrinter:`Tipo de filamento necessário não encontrado na impressora.`,whenToPrint:`Quando imprimir`,asap:`O quanto antes`,queue:`Fila`,schedule:`Agendar`,dateTime:`Data e hora`,invalidDateTime:`Digite uma data e hora válidas`,openCalendar:`Abrir calendário`,requireManualStart:`Exigir início manual`,requirePreviousSuccess:`Iniciar somente se a impressão anterior foi concluída com sucesso`,autoOffAfter:`Desligar impressora ao finalizar`,helpAsap:`A impressão será adicionada ao topo da fila e começará assim que uma impressora elegível estiver ociosa.`,helpSchedule:`A impressão começará no horário agendado se a impressora estiver ociosa. Se estiver ocupada, aguardará até ficar disponível.`,helpQueue:`A impressão será adicionada ao fim da fila.`,leftNozzle:`L`,rightNozzle:`R`,leftNozzleTooltip:`Bico esquerdo`,rightNozzleTooltip:`Bico direito`,ftsSameInletHint:`Todos os filamentos desta impressão estão no comutador de trajeto de filamento IN-{{inlet}}. Trocar entre filamentos da mesma entrada é mais lento — mova um para um AMS da outra entrada.`,rackPosition:`Posição no rack`,rackPositionTooltip:`Qual bico do rack imprime este filamento. As posições são numeradas como na impressora.`,rackEmptyPosition:`Esta posição do rack está vazia`,rackWrongNozzle:`Tem um bico {{has}}; este filamento precisa de {{needs}}`,filamentOverride:`Substituição de Filamento`,filamentOverrideHint:`Substitua opcionalmente os filamentos para atribuição baseada em modelo. O agendador usará os filamentos selecionados em vez dos valores originais do 3MF.`,originalFilament:`Original`,overrideWith:`Substituir por`,resetToOriginal:`Restaurar original`,insufficientFilamentTitle:`Filamento insuficiente`,waitingForAmsStatus:`Aguardando o status do AMS de {{printer}}…`,insufficientFilamentMessage:`Alguns dos carretéis atribuídos têm menos filamento restante do que o necessário para esta impressão:`,insufficientFilamentLine:`{{printer}} - {{slot}}: necessário {{required}}g, restante {{remaining}}g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: necessário {{required}}g, {{remaining}}g disponíveis entre bobinas correspondentes (AMS Filament Backup)`,printAnyway:`Imprimir mesmo assim`,forceColorMatch:`Forçar correspondência de cor`,staggerPrinterStarts:`Escalonar inícios`,staggerGroupSize:`Tamanho do grupo`,staggerInterval:`Intervalo (min)`,staggerPreview:`{{printers}} impressoras → {{groups}} grupos de {{size}}, iniciando a cada {{interval}} min`,staggerLastGroup:`último grupo: {{count}}`,staggerTotal:`total: {{minutes}} min`,staggerToPrinters:`Escalonar para {{count}} impressoras`,gcodeInjection:`Injetar G-code de auto-impressão`,insufficientBudget:`Orçamento insuficiente`,unlimitedNoBudget:`Ilimitado – nenhum limite de orçamento foi definido.`,noPrintableCostCenters:`Não há nenhum centro de custo ativo disponível para impressão. Peça a um administrador para conceder acesso de impressão.`},backup:{includesEncryptionKey:`Backups locais incluem o arquivo da chave de criptografia MFA (DATA_DIR/.mfa_encryption_key), então o backup ZIP é autossuficiente. Trate o ZIP como sensível — quem tiver o arquivo pode descriptografar os client secrets OIDC e os segredos TOTP armazenados.`,title:`Bakup e Restauração`,createBackup:`Criar Backup`,restoreBackup:`Restaurar Backup`,restoreDescription:`Substituir todos os dados a partir de um arquivo de backup`,downloadBackup:`Baixar Backup`,uploadBackup:`Enviar Backup`,lastBackup:`Último Backup`,autoBackup:`Backup automático`,backupNow:`Fazer Backup Agora`,restoreWarning:`Aviso: Restaurar um backup substituirá todos os dados atuais.`,includeArchives:`Incluir Arquivos`,includeSettings:`Incluir Configurações`,includeProfiles:`Incluir Perfis`,backupSuccess:`Backup criado com sucesso`,restoreSuccess:`Backup restaurado com sucesso`,backupFailed:`Falha ao criar backup`,restoreFailed:`Falha ao restaurar backup`,restoreNote:`A impressora virtual será parada durante a restauração`,githubBackup:`Backup GitHub`,enabled:`Ativado`,cloudLoginRequired:`Login no Bambu Cloud necessário. Entre em Perfis → Perfis Cloud para ativar o backup GitHub.`,cloudLoginRequiredShort:`Login Cloud necessário`,githubDescription:`Sincronize automaticamente seus perfis com um repositório GitHub privado para backup e histórico de versões.`,repoIsPrivate:`O repositório é privado — seguro para backup.`,repoIsPublicWarning:`O repositório está PÚBLICO. Os backups do Bambuddy incluem credenciais MQTT, tokens do Home Assistant, tokens do Prometheus, seu e-mail do Bambu Cloud e os códigos de acesso das impressoras via K-profiles. Salvar está bloqueado até que você torne o repositório privado nas configurações do seu provedor.`,repoVisibilityUnknown:`Não foi possível determinar a visibilidade do repositório. O Bambuddy se recusa a fazer backup em qualquer destino não confirmado como privado; salvar será bloqueado.`,repositoryUrl:`URL do repositório`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Permitir HTTP inseguro`,allowInsecureHttpHint:`Ativar para instâncias auto-hospedadas em redes privadas sem TLS`,personalAccessToken:`Token de acesso pessoal`,tokenSaved:`(salvo)`,enterNewToken:`Digite um novo token para atualizar`,tokenHintGitHub:`Token de granularidade fina com acesso de leitura e escrita a Contents, ou token clássico com o escopo repo.`,tokenHintGitLab:`Token com o escopo api, ou read_repository junto com write_repository.`,tokenHintGitea:`Token com o escopo write:repository.`,tokenHintForgejo:`Token com o escopo write:repository. Um token limitado somente a este repositório já basta.`,branch:`Branch`,provider:`Provedor Git`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Apenas manual`,hourly:`A cada hora`,daily:`Diário`,weekly:`Semanal`,includeInBackup:`Incluir no backup`,kProfiles:`K-Perfis`,kProfilesDescription:`Calibração de avanço de pressão das impressoras conectadas`,noPrintersConnected:`Nenhuma impressora conectada`,printersConnected:`{{connected}}/{{total}} conectadas`,cloudProfiles:`Perfis Cloud`,cloudProfilesDescription:`Predefinições de filamento, impressora e processo do Bambu Cloud e do Orca Cloud`,cloudProfilesAccounts:`Contas conectadas — Bambu Cloud: {{bambu}}, Orca Cloud: {{orca}}`,appSettings:`Configurações do App`,appSettingsDescription:`Configuração do Bambuddy (banco de dados completo)`,spoolInventory:`Inventário de bobinas`,spoolInventoryDescription:`Bobinas de filamento, histórico de uso e rastreamento de custos`,printArchives:`Arquivos de impressão`,printArchivesDescription:`Metadados do histórico de impressão (sem arquivos gcode/3MF)`,lastBackupAt:`Último backup:`,noBackupsYet:`Nenhum backup ainda`,next:`Próximo:`,startingBackup:`Iniciando backup...`,test:`Testar`,enableBackup:`Ativar backup`,testConnection:`Testar conexão`,enterRepoUrl:`Digite a URL do repositório`,enterRepoAndToken:`Digite a URL do repositório e o token de acesso`,repoRequired:`A URL do repositório é obrigatória`,tokenRequired:`O token de acesso é obrigatório`,githubBackupEnabled:`Backup GitHub ativado`,tokenUpdated:`Token atualizado`,settingsSaved:`Configurações salvas`,failedToSave:`Falha ao salvar: {{message}}`,backupCompleteFiles:`Backup concluído - {{count}} arquivos atualizados`,backupSkippedNoChanges:`Backup ignorado - sem alterações`,backupFailed2:`Falha no backup: {{message}}`,clearedLogs:`{{count}} logs removidos`,failedToClearLogs:`Falha ao limpar logs: {{message}}`,restoreFromGit:{button:`Restaurar do Git`,title:`Restaurar do backup Git`,subtitle:`Escolha um commit e o que deve ser restaurado`,commitLabel:`Commit do backup`,latestCommit:`Backup mais recente (ponta do branch)`,categoriesLabel:`O que restaurar`,inspecting:`Lendo o conteúdo do backup...`,itemCount:`{{count}} no backup`,overwriteLabel:`Sobrescrever entradas existentes`,overwriteOn:`As entradas existentes serão atualizadas a partir do backup.`,overwriteOff:`Apenas as entradas ausentes são adicionadas; as existentes permanecem intactas.`,selectedCount:`{{count}} selecionados`,restoring:`Restaurando...`,confirmTitle:`Restaurar do backup?`,confirmMessage:`As categorias selecionadas serão restauradas deste commit. As entradas ausentes são adicionadas e as existentes permanecem como estão.`,confirmMessageOverwrite:`As categorias selecionadas serão restauradas deste commit, sobrescrevendo as entradas que já existem localmente. Não é possível desfazer.`,kprofilesOverwriteCaveat:`Os perfis K são a exceção: gravar um slot sempre substitui a calibração na impressora.`,tally:`{{restored}} restaurados, {{skipped}} ignorados, {{failed}} com falha`,reloadHint:`Recarregue o Bambuddy para que os dados restaurados apareçam em todos os lugares.`,partialHint:`As categorias listadas acima foram concluídas e estão salvas. As que faltam não chegaram a ser executadas.`,failed:`Falha na restauração.`,loadFailed:`Não foi possível ler o repositório de backup.`,details:{notPresent:`Não está presente neste commit de backup`,unreadableJson:`JSON ilegível: {{paths}}`,settingsNoPayload:`Nenhuma configuração nos dados`,settingsCredentialsWillSkip:`{{count}} chaves parecidas com credenciais serão ignoradas`,settingsCompanionWillSkip:`{{count}} chaves parecidas com credenciais serão ignoradas, e {{companion}} chaves que dependem delas ficarão desligadas`,settingsCompanionOnlyWillSkip:`{{companion}} chaves ficarão desligadas - a credencial que cada uma precisa não pode ser restaurada de um backup`,spoolsUsageCount:`incluindo {{count}} registros de consumo`,archivesMetadataOnly:`Somente metadados - arquivos 3MF e miniaturas não ficam em um backup Git`,kprofilesPrinterCount:`em {{count}} impressoras`},notes:{noData:`Não há dados desse tipo neste backup`,archivesPrinterMissing:`Alguns arquivos referenciavam impressoras que não existem mais - vínculo removido`,archivesProjectMissing:`Alguns arquivos referenciavam projetos que não existem mais - vínculo removido`,archivesOwnerCleared:`Alguns arquivos referenciavam usuários que não existem mais - o proprietário foi limpo, então eles só ficam visíveis para usuários com a permissão archives:read_all até que um administrador os reatribua`,archivesOwnerUnmatched:`Alguns arquivos apontam para um proprietário que esta instância não tem - o proprietário foi limpo em vez de deduzido do id de usuário da cópia, então eles só ficam visíveis para usuários com a permissão archives:read_all até que um administrador os reatribua`,archivesOwnerUnknown:`Alguns arquivos foram restaurados sem proprietário - este backup não registra nenhum, então eles só ficam visíveis para usuários com a permissão archives:read_all até que um administrador os atribua`,archivesUndeleted:`Arquivos excluídos desde o backup voltaram a ficar visíveis - a sobrescrita estava ligada`,archivesMetadataOnly:`Os arquivos restaurados contêm apenas metadados - os arquivos 3MF e as miniaturas não ficam em um backup Git`,spoolUsageUnresolved:`{{count}} registros de consumo ignorados - o carretel deles não está na lista de carretéis deste backup, então não há a que vinculá-los.`,spoolUsageUnlinked:`{{count}} registros de consumo restaurados sem o vínculo com o histórico de impressão - selecione Arquivos de impressão junto com Inventário de carretéis para mantê-lo.`,spoolTagKept:`{{count}} etiquetas de carretel foram mantidas como estavam - o backup teria apagado uma etiqueta lida desde então, ou a teria movido para um segundo carretel.`,settingsCredentialsSkipped:`{{count}} chaves parecidas com credenciais ignoradas - digite os segredos novamente à mão`,settingsAuthSkipped:`{{count}} configurações de autenticação ignoradas - altere-as em Configurações > Autenticação para que as verificações de bloqueio continuem valendo`,settingsCompanionSkipped:`{{keys}} ficaram desligados - a credencial que cada um precisa não pode ser restaurada de um backup e esta instância não tem nenhuma armazenada, então ligá-los deixaria a integração sem autenticação`,settingsMqttRelayFailed:`Configurações MQTT restauradas, mas o relay não pôde ser reconectado - reinicie o Bambuddy`,kprofilesAlwaysOverwrite:`Os perfis K sempre sobrescrevem o slot correspondente na impressora`,kprofilesAckUnreliable:`Uma impressora que não responde ainda conta como restaurada - verifique os perfis na impressora`,kprofilesPrinterMissing:`Nenhuma impressora com o número de série {{serial}} - ignorado`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) não está conectada - ignorado`,kprofilesUnknownNozzle:`Diâmetro de bico inesperado {{nozzle}} para {{serial}} - enviado como está`,kprofilesUnmatched:`{{count}} perfis para {{nozzle}} não tinham correspondente em {{printer}} - adicionados como novos perfis`,kprofilesSendFailed:`Não foi possível enviar os perfis de {{nozzle}} para {{printer}} ({{serial}})`,kprofilesRefused:`{{printer}} ({{serial}}) recusou os perfis de {{nozzle}}: {{reason}}`,kprofilesStepFailed:`Não foi possível concluir a etapa dos perfis K - {{reason}}. O que foi restaurado antes continua salvo.`}},history:`Histórico`,clear:`Limpar`,date:`Data`,status:`Status`,trigger:`Tipo`,triggers:{manual:`Backup manual`,scheduled:`Backup agendado`,restore:`Restauração`},commit:`Commit`,localBackup:`Backup local`,localBackupDescription:`Crie um backup completo dos seus dados do Bambuddy incluindo banco de dados, arquivos, uploads e todos os ficheiros.`,downloadBackupLabel:`Baixar backup`,completeBackupZip:`Backup completo: banco de dados + todos os arquivos (ZIP)`,download:`Baixar`,preparingBackup:`Preparando backup...`,creatingArchive:`Criando arquivo de backup... Isso pode demorar para backups grandes.`,downloadingFile:`Baixando arquivo de backup...`,backupDownloaded:`Backup baixado com sucesso`,failedToCreateBackup:`Falha ao criar backup: {{message}}`,restore:`Restaurar`,restoreReplacesAll:`A restauração substitui todos os dados.`,restoreReplacesAllDetail:`Seu banco de dados e arquivos atuais serão completamente substituídos. É necessário reiniciar após a restauração.`,restoreConfirmTitle:`Restaurar backup`,restoreConfirmMessage:`Tem certeza de que deseja restaurar de "{{filename}}"? Isso substituirá completamente seu banco de dados e todos os arquivos. O aplicativo precisará ser reiniciado após a restauração.`,restoreConfirmButton:`Restaurar backup`,uploadingFile:`Enviando arquivo de backup...`,backupRestoredRestart:`Backup restaurado. Por favor, reinicie o Bambuddy.`,failedToRestore:`Falha ao restaurar backup. Verifique o formato do arquivo.`,reloadNow:`Recarregar agora`,creatingBackup:`Criando backup`,restoringBackup:`Restaurando backup`,preparing:`Preparando...`,processing:`Processando...`,doNotClosePage:`Por favor, não feche esta página nem navegue para outro lugar. Esta operação pode levar vários minutos para backups grandes.`,restoring:`Restaurando...`,restoreComplete:`Restauração concluída`,restoreFailed2:`Falha na restauração`,importSettings:`Importar configurações de um arquivo de backup`,pleaseWaitRestoring:`Aguarde enquanto seus dados estão sendo restaurados`,selectBackupFile:`Clique para selecionar um arquivo de backup (.json ou .zip)`,duplicateHandling:`Como funciona o tratamento de duplicatas:`,matchPrinters:`Impressoras`,matchPrintersBy:`correspondência por número de série`,matchSmartPlugs:`Tomadas inteligentes`,matchSmartPlugsBy:`correspondência por endereço IP`,matchNotificationProviders:`Provedores de notificação`,matchNotificationProvidersBy:`correspondência por nome`,matchFilaments:`Filamentos`,matchFilamentsBy:`correspondência por nome + tipo + marca`,matchArchives:`Arquivos`,matchArchivesBy:`correspondência por hash de conteúdo (sempre ignorado)`,matchPendingUploads:`Uploads pendentes`,matchPendingUploadsBy:`correspondência por nome do arquivo`,matchSettingsTemplates:`Configurações e modelos`,matchSettingsTemplatesBy:`sempre sobrescritos`,replaceExisting:`Substituir dados existentes`,keepExisting:`Manter dados existentes`,overwriteDescription:`Sobrescrever itens que já existem com dados do backup`,keepDescription:`Restaurar apenas itens que ainda não existem`,overwriteCaution:`Cuidado:`,overwriteWarning:`A sobrescrita substituirá suas configurações atuais pelos dados do backup. Códigos de acesso das impressoras nunca são sobrescritos por segurança.`,cancel:`Cancelar`,processingBackup:`Processando arquivo de backup...`,itemsRestored:`Itens restaurados`,itemsSkipped:`Itens ignorados`,restored:`Restaurados`,skippedAlreadyExist:`Ignorados (já existem)`,filesCategory:`Arquivos (3MF, miniaturas, etc.)`,andMore:`...e mais {{count}}`,newApiKeysGenerated:`Novas chaves API geradas`,keysShownOnce:`Estas chaves são exibidas apenas uma vez. Copie-as agora!`,copy:`Copiar`,noDataFound:`Nenhum dado para restaurar foi encontrado no arquivo de backup.`,close:`Fechar`,scheduledBackup:`Backups agendados`,scheduledBackupDescription:`Cria automaticamente snapshots de backup conforme agendamento. O diretório de saída pode ser montado em um NAS ou armazenamento externo.`,frequency:`Frequência`,backupTime:`Tempo`,retention:`Retenção`,retentionDescription:`Número de backups a manter`,outputPath:`Caminho de saída`,outputPathPlaceholder:`Padrão: {{path}}`,outputPathDescription:`Deixe em branco para o local padrão`,runNow:`Executar agora`,backupFiles:`Arquivos de backup`,noScheduledBackups:`Sem backups ainda`,deleteBackup:`Excluir`,deleteBackupConfirm:`Excluir este arquivo de backup?`,backupRunning:`Backup em andamento...`,scheduledBackupComplete:`Backup concluído com sucesso`,scheduledBackupFailed:`Falha no backup`,nextBackup:`Próximo backup`,backupSize:`Tamanho`,localTimeHint:`Horário local ({{tz}})`,defaultPathLabel:`Padrão:`,pathCheck:{title:`O Bambuddy não consegue gravar neste diretório`,howToFix:`Como corrigir:`,sandboxed:`O serviço do Bambuddy não consegue gravar em {{path}}. Sua unit do systemd roda com ProtectSystem=strict, o que torna todo diretório fora dos diretórios de instalação, dados e logs somente leitura para o serviço - mesmo um em que você consegue gravar pelo seu próprio shell.`,read_only:`{{path}} está em um sistema de arquivos somente leitura.`,permission_denied:`O Bambuddy não tem permissão para gravar em {{path}}. Verifique o dono e as permissões do diretório.`,no_space:`O sistema de arquivos que contém {{path}} está cheio.`,not_a_directory:`{{path}} existe, mas não é um diretório.`,missing:`{{path}} não existe e não pôde ser criado.`,error:`O Bambuddy não consegue gravar em {{path}}.`,ephemeralTitle:`Estes backups não sobrevivem à recriação do contêiner`,container_ephemeral:`{{path}} está dentro do contêiner do Bambuddy, não no host. Backups gravados ali são perdidos quando o contêiner é recriado. Monte o diretório do host:`},categories:{settings:`Configurações`,notification_providers:`Provedores de notificação`,notification_templates:`Modelos de notificação`,smart_plugs:`Tomadas inteligentes`,printers:`Impressoras`,filaments:`Filamentos`,maintenance_types:`Tipos de manutenção`,archives:`Arquivos`,projects:`Projetos`,pending_uploads:`Uploads pendentes`,external_links:`Links externos`,api_keys:`Chaves API`}},tags:{title:`Etiquetas`,addTag:`Adicionar Tag`,editTag:`Editar Tag`,deleteTag:`Excluir Tag`,tagName:`Nome da Tag`,tagColor:`Cor da Tag`,noTags:`Nenhuma tag`,deleteConfirm:`Tem certeza de que deseja excluir esta tag?`,manageTags:`Gerenciar Tags`},uploadModal:{title:`Upload Arquivos 3MF`,dragDrop:`Arraste e solte arquivos .3mf aqui`,or:`ou`,browseFiles:`Procurar Arquivos`,extractionInfo:`O modelo da impressora será extraído automaticamente dos metadados do arquivo 3MF.`,uploaded:`enviado`,failed:`falhou`,uploading:`Enviando...`,upload:`Enviar`,uploadFailed:`Falha no envio`},editArchive:{title:`Editar Arquivo`,name:`Nome`,namePlaceholder:`Nome da impressão`,printer:`Impressora`,noPrinter:`Nenhuma impressora`,project:`Projeto`,noProject:`Nenhum projeto`,itemsPrinted:`Itens Impressos`,itemsPrintedHelp:`Número de itens produzidos neste trabalho de impressão. Use 0 se a placa inteira foi perdida.`,filamentUsed:`Filamento usado (g)`,filamentUsedPlaceholder:`ex.: 46.16`,filamentUsedHelp:`Informe manualmente quando uma impressão for arquivada sem o 3MF, para que ela ainda conte nos totais de filamento. Reescanear um arquivo que tem o 3MF lê o valor novamente do arquivo.`,notes:`Notas`,notesPlaceholder:`Adicione notas sobre esta impressão...`,externalLink:`Link Externo`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Link para Printables, Thingiverse ou outra fonte`,tags:`Etiquetas`,tagsPlaceholder:`Adicionar tags...`,addMoreTags:`Adicionar mais tags...`,matchingTags:`Correspondendo "{{query}}"`,existingTags:`Tags existentes`,clickToAdd:`(clique para adicionar)`,status:`Status`,failureReason:`Motivo da Falha`,selectReason:`Selecione o motivo...`,photos:`Fotos do Resultado da Impressão`,photosHelp:`Clique em + para adicionar fotos do seu resultado impresso`,printResult:`Resultado da Impressão`,saving:`Salvando...`,failureReasons:{adhesionFailure:`Falha de adesão`,spaghettiDetached:`Spaghetti / Destacado`,layerShift:`Deslocamento de camada`,cloggedNozzle:`Bico entupido`,filamentRunout:`Fim do filamento`,warping:`Empenamento`,stringing:`Fios`,underExtrusion:`Subextrusão`,powerFailure:`Falha de energia`,userCancelled:`Cancelado pelo usuário`,noStatusUpdate:`Nenhuma atualização de status recebida`,other:`Outro`},statuses:{completed:`Concluído`,failed:`Falhou`,aborted:`Cancelado`,printing:`Imprimindo`}},kProfiles:{title:`Perfis K`,noPrintersConfigured:`Nenhuma impressora configurada`,addPrinterInSettings:`Adicione uma impressora nas Configurações para gerenciar K-profiles`,noActivePrinters:`Nenhuma impressora ativa`,enablePrinterConnection:`Ative a conexão da impressora para visualizar seus K-profiles`,loadingProfiles:`Carregando K-Profiles...`,printerOffline:`Impressora Offline`,printerOfflineDesc:`A impressora selecionada não está conectada. Ligue-a para visualizar os K-profiles.`,noMatchingProfiles:`Nenhum Perfil Correspondente`,noMatchingProfilesDesc:`Nenhum perfil corresponde aos seus critérios de pesquisa`,noKProfiles:`Nenhum K-Profile`,noKProfilesDesc:`Nenhum perfil de avanço de pressão encontrado para bico de {{diameter}}mm`,createFirstProfile:`Criar Primeiro Perfil`,printer:`Impressora`,nozzle:`Bico`,refresh:`Atualizar`,addProfile:`Adicionar Perfil`,export:`Exportar`,import:`Importar`,select:`Selecionar`,selectAll:`Selecionar Todos`,delete:`Excluir`,searchPlaceholder:`Pesquisar por nome ou filamento...`,allExtruders:`Todos os Extrusores`,leftOnly:`Apenas Esquerdo`,rightOnly:`Apenas Direito`,allFlow:`Todo Fluxo`,hfOnly:`Apenas HF`,sOnly:`Apenas S`,sortName:`Ordenar: Nome`,sortKValue:`Ordenar: Valor K`,sortFilament:`Ordenar: Filamento`,leftExtruder:`Extrusor Esquerdo`,rightExtruder:`Extrusor Direito`,modal:{addTitle:`Adicionar K-Profile`,editTitle:`Editar K-Profile`,profileName:`Nome do Perfil`,profileNamePlaceholder:`Meu Perfil PLA`,kValue:`Valor K`,kValuePlaceholder:`0.020`,kValueHelp:`Faixa típica: 0.01 - 0.06 para PLA, 0.02 - 0.10 para PETG`,filament:`Filamento`,selectFilament:`Selecionar filamento...`,source:{local:`Importado`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Integrado`},noFilamentsHelp:`Nenhum filamento disponível. Entre na Bambu Cloud ou importe predefinições em Perfis → Perfis Locais.`,searchFilaments:`Buscar filamentos...`,noFilamentMatches:`Nenhum filamento corresponde a essa busca`,flowType:`Tipo de Fluxo`,highFlow:`Alto Fluxo`,standard:`Padrão`,nozzleSize:`Tamanho do Bico`,extruder:`Extrusor`,extruders:`Extrusores`,left:`Esquerdo`,right:`Direito`,notes:`Notas (armazenadas localmente)`,notesPlaceholder:`Adicione notas sobre este perfil...`,notesHelp:`As notas são salvas no Bambuddy, não na impressora`,syncing:`Sincronizando com a impressora...`,savingExtruder:`Salvando no extrusor {{current}}/{{total}}...`,pleaseWait:`Por favor, aguarde`},deleteConfirm:{title:`Excluir Perfil`,cannotUndo:`Isso não pode ser desfeito`,message:`Tem certeza de que deseja excluir "{{name}}" da impressora?`},bulkDelete:{title:`Excluir Perfis`,cannotUndo:`Isso não pode ser desfeito`,message:`Tem certeza de que deseja excluir {{count}} perfis selecionados da impressora?`},toast:{profileSaved:`K-profile salvo`,profilesSaved:`K-profile salvo em {{count}} extrusores`,selectAtLeastOneExtruder:`Por favor, selecione pelo menos um extrusor`,selectFilament:`Selecione um filamento primeiro`,filamentNotResolvable:`Sem ID de filamento Bambu para {{name}} — a impressora não consegue armazenar um perfil`,profileDeleted:`K-profile excluído`,profilesDeleted:`{{count}} perfis excluídos`,exportedProfiles:`{{count}} perfis exportados`,importedProfiles:`{{count}} de {{total}} perfis importados`,noProfilesToExport:`Nenhum perfil para exportar`,invalidFileFormat:`Formato de arquivo inválido`,failedToParseImport:`Falha ao analisar o arquivo de importação`,failedToSaveBatch:`Falha ao salvar K-profiles`,noteSaved:`Nota salva`,failedToSaveNote:`Falha ao salvar nota`},permission:{noRead:`Você não tem permissão para atualizar perfis`,noCreate:`Você não tem permissão para adicionar perfis`,noUpdate:`Você não tem permissão para atualizar K-profiles`,noDelete:`Você não tem permissão para excluir K-profiles`,noExport:`Você não tem permissão para exportar perfis`,noImport:`Você não tem permissão para importar perfis`}},virtualPrinter:{title:`Impressora Virtual`,running:`Em execução`,stopped:`Parada`,description:{default:`Ative uma impressora virtual que aparece no Bambu Studio e no OrcaSlicer. Os arquivos enviados para esta impressora serão arquivados diretamente sem impressão.`,proxy:`Ative um proxy que retransmite o tráfego do slicer para uma impressora real, permitindo impressão remota em qualquer rede.`},enable:{title:`Ativar Impressora Virtual`,visibleInSlicer:`Visível como "Bambuddy" na descoberta do slicer`,proxyingTo:`Proxy para {{name}}`,notActive:`Não ativo`},model:{title:`Modelo da Impressora`,description:`Selecione qual modelo de impressora emular.`,restartWarning:`Alterar o modelo reiniciará a impressora virtual`},accessCode:{title:`Código de acesso`,isSet:`O código de acesso está definido`,notSet:`Nenhum código de acesso definido — necessário para ativar.`,placeholder:`Digite um código de 8 caracteres`,placeholderChange:`Digite um novo código para alterar`,hint:`Deve ter exatamente 8 caracteres. Usado pelos slicers para autenticação.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Herdado da impressora alvo`,derivedFromTargetHint:`Usa o código de acesso da impressora alvo. A ponte encaminha a autenticação do slicer para a impressora real, então os códigos precisam corresponder — edite o código nas configurações da impressora para alterá-lo.`,reveal:`Mostrar código de acesso`,hide:`Ocultar código de acesso`},targetPrinter:{title:`Impressora Alvo`,configured:`Proxy alvo configurado`,notConfigured:`Nenhuma impressora alvo selecionada - necessário para o modo proxy`,placeholder:`Selecione uma impressora...`,hint:`Selecione a impressora para a qual o tráfego do slicer será enviado. A impressora deve estar no modo LAN.`,noPrinters:`Nenhuma impressora configurada. Adicione uma impressora primeiro para usar o modo proxy.`},remoteInterface:{title:`Substituição da Interface de Rede`,configured:`Substituição da interface ativa`,optional:`Opcional - use se o IP detectado automaticamente estiver errado (por exemplo, várias NICs, Docker, VPN)`,placeholder:`Detecção automática (padrão)...`,hint:`Substitua o endereço IP anunciado via SSDP e usado no certificado TLS. Útil quando o Bambuddy possui várias interfaces de rede.`},mode:{title:`Modo`,archive:`Arquivar`,archiveDesc:`Arquivar arquivos imediatamente`,review:`Revisar`,reviewDesc:`Revisar antes de arquivar`,queue:`Fila`,queueDesc:`Arquivar e adicionar à fila`,proxy:`Proxy`,proxyDesc:`Retransmitir para impressora real`},autoDispatch:{title:`Envio automático`,description:`Iniciar impressões automaticamente quando adicionadas à fila. Quando desativado, as impressões aguardam envio manual.`},queueForceColorMatch:{title:`Forçar correspondência de cor`,description:`Recusa enviar para uma impressora que não tenha exatamente o tipo e cor de filamento carregados. Desativado por padrão — sem isto, a fila usa apenas correspondência por modelo e pode escolher uma impressora com a cor errada carregada.`},saveAmsMapping:{title:`Salvar mapeamento de AMS`,description:`Persiste a escolha de slot AMS feita pelo próprio fatiador (do comando MQTT project_file) no arquivo, para que uma reimpressão posterior reutilize o mesmo carretel físico em vez de derivá-lo novamente do tipo/cor do arquivo. Desativado por padrão.`},gcodeInjection:{title:`Injeção de G-code`,description:`Aplica os trechos de G-code configurados por modelo nas Configurações aos trabalhos deste VP. Desativado por padrão.`},tailscaleDisabled:{title:`Integração Tailscale`,description:`Ative para marcar este VP como exposto via Tailscale. Mostra o endereço Tailscale do host para você saber qual IP colar no fatiador. A etapa de importação CA é inalterada — este toggle não afeta certificados.`},setupRequired:{title:`Configuração Necessária`,description:`O recurso de impressora virtual requer configuração adicional do sistema antes de funcionar. Isso inclui encaminhamento de portas, regras de firewall e configurações específicas da plataforma.`,readGuide:`Leia o guia de configuração antes de ativar`},howItWorks:{title:`Como funciona`,step1:`Complete o guia de configuração para sua plataforma`,step2:`Ative a impressora virtual e defina um código de acesso`,step3:`No Bambu Studio ou OrcaSlicer, vá para "Adicionar Impressora"`},status:{title:`Detalhes do Status`,printerName:`Nome da Impressora`,model:`Modelo`,serialNumber:`Número de Série`,mode:`Modo`,pendingFiles:`Arquivos Pendentes`,targetPrinter:`Impressora Alvo`,ftpPort:`Porta FTP`,mqttPort:`Porta MQTT`,ftpConnections:`Conexões FTP`,mqttConnections:`Conexões MQTT`},toast:{updated:`Configurações da impressora virtual atualizadas`,failedToUpdate:`Falha ao atualizar as configurações`,copyFailed:`Falha ao copiar — selecione o texto manualmente`,accessCodeRequired:`Defina um código de acesso primeiro`,targetPrinterRequired:`Selecione uma impressora alvo primeiro`,bindIpRequired:`Defina um IP de ligação primeiro`,accessCodeEmpty:`O código de acesso não pode estar vazio`,accessCodeLength:`O código de acesso deve ter exatamente 8 caracteres`,targetCodeChangedRebind:`O código de acesso agora corresponde à nova impressora alvo. Adicione este dispositivo novamente no seu slicer para usar o novo código.`,created:`Impressora virtual criada`,failedToCreate:`Falha ao criar impressora virtual`,deleted:`Impressora virtual excluída`,failedToDelete:`Falha ao excluir impressora virtual`},list:{title:`Impressoras Virtuais`,add:`Adicionar`,addFirst:`Adicionar Impressora Virtual`,empty:`Nenhuma impressora virtual configurada. Adicione uma para começar.`},bindIp:{title:`Interface de Rede`,placeholder:`Selecionar interface...`,hint:`Interface de rede para esta impressora virtual. Deve ser única por impressora.`},proxy:{accessCodeHint:`No modo proxy, use o código de acesso da impressora alvo no slicer. A conexão é encaminhada de forma transparente para a impressora real.`},addDialog:{title:`Adicionar Impressora Virtual`,name:`Nome`,hint:`Você pode configurar o código de acesso, impressora alvo e outras configurações após a criação.`,create:`Criar`},deleteConfirm:{title:`Excluir Impressora Virtual`,message:`Tem certeza que deseja excluir "{{name}}"? Isso irá parar todos os serviços desta impressora.`},archiveNameSource:{title:`Origem do nome do arquivo`,description:`Escolha como os novos arquivos são nomeados quando chegam pela impressora virtual. "Metadados" usa o título embutido pelo slicer no 3MF (padrão). "Nome do arquivo" usa o nome que o Bambu Studio enviou via FTP. Nota: o Bambu Studio sobrescreve o nome digitado no diálogo "enviar para impressora" com o campo Título do 3MF quando presente, portanto ambos os modos costumam produzir a mesma string.`,metadata:`Metadados`,filename:`Nome do arquivo`},caCert:{title:`Certificado do slicer`,description:`As impressoras virtuais usam um certificado TLS assinado pela CA do Bambuddy. Importe este certificado CA para o armazenamento de confiança do seu slicer uma única vez para que ele aceite a conexão — sem precisar copiá-lo pela linha de comando.`,copy:`Copiar`,copied:`Copiado`,download:`Baixar`,fingerprint:`SHA-256`}},modelViewer:{openInSlicer:`Abrir no Slicer`,openInSlicerWith:`Abrir em {{slicer}}`,moreSlicerOptions:`Mais opções de fatiador`,openInSlicerFailed:`Não foi possível abrir no fatiador`,tabs:{model:`Modelo 3D`},notAvailable:`Não disponível`,plates:`Placas`,allPlates:`Todas as Placas`,plateNumber:`Placa {{number}}`,plateCount:`{{count}} placa`,plateCount_other:`{{count}} placas`,objectCount:`{{count}} objeto`,objectCount_other:`{{count}} objetos`,filamentCount:`{{count}} filamento`,filamentCount_other:`{{count}} filamentos`,eta:`ETA {{minutes}} min`,noPreview:`Pré-visualização não disponível para este arquivo`,pagination:{pageOf:`Página {{current}} de {{total}}`,prev:`Anterior`,next:`Próximo`},errors:{failedToLoad:`Falha ao carregar o arquivo`,noMeshes:`Nenhuma malha encontrada no arquivo 3MF`,unsupportedFormat:`Formato de arquivo não suportado`}},maintenanceDescriptions:{lubricateCarbonRods:`Aplique lubrificante nos eixos de carbono para um movimento suave`,lubricateRails:`Aplique lubrificante nos trilhos lineares para um movimento suave`,cleanNozzle:`Limpe o hotend e o bico para evitar entupimentos`,checkBelts:`Verifique a tensão das correias para impressões precisas`,cleanBuildPlate:`Limpe a placa de construção para melhor adesão`,checkExtruder:`Verifique as engrenagens do extrusor quanto ao desgaste`,checkCooling:`Verifique se os ventiladores de resfriamento estão funcionando corretamente`,generalInspection:`Inspeção geral da impressora`,cleanCarbonRods:`Limpe os eixos de carbono para reduzir o atrito`,lubricateSteelRods:`Aplique lubrificante nas barras de aço para um movimento suave`,cleanSteelRods:`Limpe as barras de aço para reduzir o atrito`,cleanLinearRails:`Limpe os trilhos lineares para remover poeira e detritos`,checkPtfeTube:`Verifique o tubo PTFE quanto ao desgaste ou danos`,replaceHepaFilter:`Substitua o filtro HEPA para qualidade do ar`,replaceCarbonFilter:`Substitua o filtro de carbono ativado`,lubricateLeftNozzleRail:`Lubrifique o trilho do bico esquerdo (série H2)`},haSensors:{label:`Sensores`,unavailable:`Indisponível`,blocksPrints:`{{entity}} — segura as impressões enquanto houver alerta`,states:{open:`Aberto`,closed:`Fechado`,unlocked:`Destrancado`,locked:`Trancado`,detected:`Detectado`,clear:`Livre`,wet:`Molhado`,dry:`Seco`,problem:`Problema`,ok:`OK`,running:`Em funcionamento`,stopped:`Parado`,on:`Ligado`,off:`Desligado`},sectionTitle:`Sensores do Home Assistant (impressoras)`,add:`Adicionar sensor`,addTitle:`Adicionar sensor do Home Assistant`,editTitle:`Editar sensor do Home Assistant`,empty:`Nenhum sensor ainda. Vincule um contato de porta ou um termômetro do Home Assistant para exibi-lo no cartão da impressora.`,unknownPrinter:`Impressora desconhecida`,badgeBlocks:`Segura impressões`,badgeNotifies:`Notifica`,badgeHidden:`Oculto no cartão`,printer:`Impressora`,entity:`Entidade`,searchPlaceholder:`Buscar entidades...`,noEntities:`Nenhuma entidade correspondente`,name:`Nome exibido`,alertWhen:`Alertar quando`,alertNever:`Nunca — apenas exibir`,alertAbove:`Acima de`,alertBelow:`Abaixo de`,alertHint:`O estado de alerta destaca o sensor no cartão da impressora e habilita as opções abaixo.`,showOnCard:`Mostrar no cartão da impressora`,notifyOnAlert:`Enviar uma notificação quando o alerta começar`,blockPrint:`Segurar as impressões na fila enquanto houver alerta`,blockPrintHint:`Os trabalhos permanecem na fila e começam sozinhos quando o sensor normaliza. Ignorado enquanto o Home Assistant estiver inacessível.`,toast:{created:`Sensor adicionado`,updated:`Sensor salvo`,deleted:`Sensor removido`},error:{pickEntity:`Escolha uma entidade do Home Assistant`,nameRequired:`Informe um nome exibido`,printerRequired:`Escolha uma impressora`,alertRequired:`Defina primeiro uma condição de alerta`}},locationHaSensors:{sectionTitle:`Sensores do Home Assistant (locais de armazenamento)`,sectionDescription:`Vincule sensores de temperatura, umidade ou bateria do Home Assistant aos seus locais de armazenamento para exibir leituras em tempo real no cartão do filamento e na tabela. É permitido apenas um sensor por categoria em cada local.`,add:`Adicionar sensor`,addTitle:`Adicionar sensor do Home Assistant`,editTitle:`Editar sensor do Home Assistant`,empty:`Nenhum sensor ainda. Vincule um sensor de temperatura ou umidade do Home Assistant para exibi-lo no cartão do filamento.`,unknownLocation:`Local desconhecido`,location:`Local de armazenamento`,showOnCard:`Mostrar no cartão do filamento`,overwriteConfirm:{title:`Substituir o sensor existente?`,messageTemperature:`"{{location}}" já tem um sensor de temperatura vinculado: {{name}}. Continuar irá substituí-lo.`,messageHumidity:`"{{location}}" já tem um sensor de umidade vinculado: {{name}}. Continuar irá substituí-lo.`,messageBattery:`"{{location}}" já tem um sensor de bateria vinculado: {{name}}. Continuar irá substituí-lo.`},autoAdd:{confirmTitle:`Adicionar também os outros sensores?`,confirmMessage:`O Bambuddy também encontrou outros sensores para este local. Escolha quais adicionar também.`,added:`Também adicionado: {{names}}`,noneFound:`Nenhum sensor de temperatura, umidade ou bateria correspondente foi encontrado para este local.`,onlyThisOne:`Apenas este`},options:{buttonLabel:`Opções do sensor`,title:`Opções do Sensor de Local`,description:`Esses valores são usados quando um sensor de temperatura, umidade ou bateria é vinculado automaticamente junto com o primeiro sensor de um local.`,generalSettings:`Configurações gerais`,pollInterval:`Intervalo de atualização (segundos)`,pollIntervalHint:`Com que frequência o Bambuddy consulta o Home Assistant e atualiza os valores dos sensores na tela. Mínimo de 60 segundos.`,colorizeValues:`Colorir os valores dos sensores de acordo com seus limites de alerta`,aboveColor:`Cor acima do limite`,belowColor:`Cor abaixo do limite`,optimalColor:`Cor para o valor ideal`,colors:{red:`Vermelho`,orange:`Laranja`,yellow:`Amarelo`,green:`Verde`,blue:`Azul`,purple:`Roxo`,pink:`Rosa`},saved:`Opções salvas`,saveFailed:`Falha ao salvar as opções`,reset:`Redefinir`,resetConfirm:{title:`Redefinir todos os sensores de local existentes?`,message:`Isso sobrescreve os limites de alerta, notificações e visibilidade no cartão de todos os sensores de temperatura, umidade e bateria de locais existentes com os valores configurados acima, e restaura o nome de cada sensor para o nome amigável do Home Assistant — os sensores de impressora não são afetados. Isso não pode ser desfeito. Dependendo da quantidade de sensores, isso pode levar um momento.`},resetDone:`Aplicado a {{count}} sensores de local`,resetFailed:`Falha ao redefinir os sensores de local`},deleteAllConfirm:{title:`Excluir todos os sensores?`,message:`Isso remove todos os {{count}} sensores vinculados a "{{location}}". Esta ação não pode ser desfeita.`},currentlyBound:`Atualmente vinculado: {{entity}}`,error:{locationRequired:`Escolha um local de armazenamento`},toast:{created:`Sensor adicionado`,updated:`Sensor salvo`,deleted:`Sensor removido`}},smartPlugs:{offline:`Offline`,admin:`Administrador`,openPlugAdminPage:`Abrir o painel de administração da tomada inteligente`,deleteSmartPlug:`Excluir Tomada Inteligente`,turnOnSmartPlug:`Ligar Tomada Inteligente`,turnOffSmartPlug:`Desligar Tomada Inteligente`,turnOn:`Ligar`,turnOff:`Desligar`,addSmartPlug:{scanningNetwork:`Procurando na rede...`,chooseEntity:`Escolha uma entidade...`,connectionFailed:`Falha na conexão`,searchEntities:`Pesquisar entidades...`,searchPowerSensors:`Pesquisar sensores de energia...`,searchEnergySensors:`Pesquisar sensores de energia...`,placeholders:{plugName:`Tomada da Sala`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Mesmo que o tópico de energia, ou diferente`}},linkedTo:`Vinculado a:`,monitorOnly:`Apenas monitoramento`,alerts:`Alertas`,scheduleOn:`Ligar {{time}}`,scheduleOff:`Desligar {{time}}`,on:`Ligado`,off:`Desligado`,power:`Potência`,kwhToday:`kWh Hoje`,settings:`Configurações`,automationSettings:`Configurações de automação`,showInSwitchbar:`Mostrar na barra de interruptores`,quickAccessSidebar:`Acesso rápido pela barra lateral`,enabled:`Ativado`,enableAutomation:`Ativar automação para este plugue`,autoOn:`Auto Ligar`,autoOnDescription:`Ligar quando a impressão iniciar`,autoOff:`Auto Desligar`,autoOffDescription:`Desligar quando a impressão terminar (única vez)`,autoOffPersistent:`Manter ativado`,autoOffPersistentDescription:`Permanecer ativado entre impressões em vez de única vez`,controlsPrinterPower:`Alimenta a impressora`,controlsPrinterPowerDescription:`Desative se esta tomada alimenta apenas um acessório (ventoinha do filtro, luzes). Caso contrário, desligá-la marca a impressora como offline.`,autoOffAfterDrying:`Desligar Após Secagem`,autoOffAfterDryingDescription:`Desligar quando a secagem do AMS terminar`,delayAfterDryingMinutes:`Atraso após secagem (minutos)`,turnOffDelayMode:`Modo de atraso para desligar`,time:`Tempo`,temp:`Temp.`,delayMinutes:`Atraso (minutos)`,tempThreshold:`Limite de temperatura (°C)`,tempThresholdDescription:`Desliga quando o bico esfria abaixo desta temperatura`,edit:`Editar`,deleteConfirm:`Tem certeza que deseja excluir "{{name}}"? Esta ação não pode ser desfeita.`,turnOnConfirm:`Tem certeza que deseja ligar "{{name}}"?`,turnOffConfirm:`Tem certeza que deseja desligar "{{name}}"? Isso cortará a energia do dispositivo conectado.`,failedToTurn:`Falha ao {{action}} "{{name}}"`,unknown:`Desconhecido`,addTitle:`Adicionar plugue inteligente`,editTitle:`Editar plugue inteligente`,stopScanning:`Parar varredura`,discoverTasmota:`Descobrir dispositivos Tasmota`,foundDevices:`{{count}} dispositivo(s) encontrado(s) - clique para selecionar:`,noDevicesFound:`Nenhum dispositivo Tasmota encontrado na sua rede`,haNotConfigured:`Home Assistant não está configurado. Configure em`,haSettingsPath:`Configurações → Rede → Home Assistant`,selectEntity:`Selecionar entidade *`,ipAddress:`Endereço IP *`,nameLabel:`Nome *`,username:`Usuário`,password:`Senha`,authHint:`Deixe vazio se seu dispositivo Tasmota não requer autenticação`,linkToPrinter:`Vincular à impressora`,noPrinter:`Sem impressora (apenas controle manual)`,linkingDescription:`A vinculação permite ligar/desligar automaticamente ao iniciar/terminar impressão`,powerAlerts:`Alertas de potência`,alertAbove:`Alertar se acima (W)`,alertBelow:`Alertar se abaixo (W)`,alertDescription:`Receba notificações quando o consumo de energia ultrapassar estes limites. Deixe vazio para desativar essa direção.`,dailySchedule:`Programação diária`,turnOnAt:`Ligar às`,turnOffAt:`Desligar às`,scheduleDescription:`Ligar/desligar automaticamente o plugue nestes horários diariamente. Deixe vazio para pular essa ação.`,showOnPrinterCard:`Mostrar no cartão da impressora`,displayOnPrinterCard:`Exibir botão no cartão da impressora`,connectedResult:`Conectado!`,deviceLabel:`Dispositivo: {{name}} - `,stateLabel:`Estado: {{state}}`,test:`Testar`,delete:`Excluir`,save:`Salvar`,add:`Adicionar`,cancel:`Cancelar`,failedToStartScan:`Falha ao iniciar varredura`,nameRequired:`Nome é obrigatório`,entityRequired:`Entidade é obrigatória para plugues Home Assistant`,mqttTopicRequired:`Pelo menos um tópico MQTT deve ser configurado para potência, energia ou monitoramento de estado`,loadingEntities:`Carregando entidades...`,loading:`Carregando...`,failedToLoadEntities:`Falha ao carregar entidades: {{error}}`,noEntitiesMatching:`Nenhuma entidade encontrada correspondente a "{{search}}"`,noEntitiesAvailable:`Nenhuma entidade disponível`,searchingEntities:`Buscando todas as entidades ({{count}} encontradas)`,showingEntities:`Mostrando switch, light, input_boolean ({{count}} disponíveis)`,energyMonitoringOptional:`Monitoramento de energia (Opcional)`,energyMonitoringHint:`Pesquise e selecione sensores que fornecem dados de potência/energia.`,powerSensorW:`Sensor de potência (W)`,energyTodayKwh:`Energia hoje (kWh)`,totalEnergyKwh:`Energia total (kWh)`,noMatchingSensors:`Nenhum sensor correspondente`,none:`Nenhum`,mqttNotConfigured:`Broker MQTT não configurado. Defina o endereço do broker em`,mqttSettingsPath:`Configurações → Rede → Publicação MQTT`,mqttNotConfiguredSuffix:`(você não precisa ativar a publicação, apenas preencha os detalhes do broker).`,mqttMonitorOnlyDescription:`Plugues MQTT recebem dados de potência/energia via assinatura MQTT. O controle liga/desliga não está disponível - use seu broker MQTT ou sistema de automação residencial.`,powerMonitoring:`Monitoramento de potência`,energyMonitoring:`Monitoramento de energia`,stateMonitoring:`Monitoramento de estado`,optional:`opcional`,topic:`Tópico`,jsonPath:`Caminho JSON`,multiplier:`Multiplicador`,onValue:`Valor ON`,mqttPowerHint:`O caminho JSON extrai o valor do payload JSON (ex: "power_l1"). Deixe vazio se o tópico publica valores numéricos brutos.
 Use multiplicador 0.001 para mW→W, 1000 para kW→W.`,mqttEnergyHint:`O caminho JSON extrai o valor do payload JSON. Deixe vazio para valores brutos.
 Use multiplicador 0.001 para Wh→kWh, 1000 para MWh→kWh.`,mqttStateHint:`O caminho JSON extrai o valor do payload JSON. Deixe vazio para valores brutos.
-Valor ON: a string exata que significa "ON". Deixe vazio para detecção automática (ON, true, 1).`,restControl:`Controle`,restOnUrl:`URL para ligar`,restOffUrl:`URL para desligar`,restOnBody:`Corpo da requisição ON`,restOffBody:`Corpo da requisição OFF`,restMethod:`Método HTTP`,restHeaders:`Custom Headers (JSON)`,restStatusUrl:`URL de status`,restStatusPath:`Caminho JSON de estado`,restStatusOnValue:`Valor ON`,restPowerUrl:`URL de potência`,restPowerPath:`Caminho JSON de energia`,restPowerMultiplier:`Multiplicador de potência`,restEnergyUrl:`URL de energia`,restEnergyPath:`Caminho JSON de energia (hoje)`,restEnergyTotalPath:`Caminho JSON de energia (contador total)`,restEnergyTotalMultiplier:`Multiplicador do contador total`,restEnergyTotalPathHint:`ex.: aenergy.total`,restEnergyTotalHint:`Muitas tomadas — todos os Shelly entre elas — informam apenas um contador acumulado que nunca é zerado. Ele vai aqui, não no campo acima: lido como o consumo de hoje, ele nunca voltaria a zero à meia-noite, e Ontem e Total ficariam vazios. O Bambuddy calcula Hoje e Ontem a partir dele, o que exige um ou dois dias de leituras. Um Shelly informa em watt-hora, então use um multiplicador de 0.001.`,restEnergyMultiplier:`Multiplicador de energia`,restUrlRequired:`Ao menos uma URL (ON ou OFF) é necessária para tomadas REST`,restHeadersHint:`ex. {"Authorization": "Bearer your-token"}`,restBodyHint:`ex. ON, {"state": "on"}`,restStatusHint:`URL para consultar o estado atual`,restPathHint:`ex. state ou data.power.status`,restPowerUrlHint:`URL separada para dados de potência (usa a URL de status se vazio)`,restEnergyUrlHint:`URL separada para dados de energia (usa a URL de status se vazio)`,restEnergyHint:`Cada valor pode usar sua própria URL ou recorrer à URL de status. Use multiplicadores para conversão de unidades (ex: 0.001 para converter Wh em kWh).`,testConnection:`Testar conexão`,connectionSuccess:`Conexão bem-sucedida`,noSwitchesInSwitchbar:`Nenhum interruptor na barra`,enableSwitchbarHint:`Ative "Mostrar na barra de interruptores" em Configurações > Smart Plugs`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`E-mail`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`Notificações por e-mail SMTP`,telegram:`Notificações via bot do Telegram`,discord:`Enviar para canal do Discord via webhook`,ntfy:`Notificações push gratuitas e auto-hospedáveis`,pushover:`Notificações push simples e confiáveis`,callmebot:`Notificações gratuitas via WhatsApp pelo CallMeBot`,webhook:`POST HTTP genérico para qualquer URL`,homeassistant:`Notificações persistentes no painel do Home Assistant`,bark:`Notificações push do iOS via Bark (auto-hospedável)`},lastSuccess:`Último: {{date}}`,error:`Erro`,printer:`Impressora:`,allPrinters:`Todas as impressoras`,sendTestNotification:`Enviar Notificação de Teste`,eventSettings:`Configurações de Eventos`,enabled:`Ativado`,sendFromProvider:`Enviar notificações deste provedor`,printEvents:`Eventos de Impressão`,printerStatus:`Status da Impressora`,amsAlarms:`Alarmes do AMS`,amsHtAlarms:`Alarmes do AMS-HT`,printQueue:`Fila de Impressão`,start:`Início`,plateCheck:`Verificação da Mesa`,complete:`Concluído`,failed:`Falhou`,stopped:`Parado`,progress:`Progresso`,offline:`Offline`,lowFilament:`Filamento Baixo`,maintenance:`Manutenção`,amsHumidity:`Umidade do AMS`,amsTemp:`Temp. do AMS`,amsDryingSuspended:`Secagem suspensa`,amsHtHumidity:`Umidade do AMS-HT`,amsHtTemp:`Temp. do AMS-HT`,bedCooled:`Mesa Resfriada`,firstLayer:`Primeira camada`,quiet:`Silencioso`,digest:`Resumo {{time}}`,printStarted:`Impressão Iniciada`,plateNotEmpty:`Mesa Não Vazia`,plateNotEmptyDescription:`Objetos detectados antes da impressão`,plateClearRequired:`Confirmar mesa livre`,plateClearRequiredDescription:`Impressão concluída, a fila aguarda confirmação`,plateClear:`Mesa livre`,printCompleted:`Impressão Concluída`,bedCooledLabel:`Mesa Resfriada`,bedCooledDescription:`Mesa resfriou abaixo do limite após a impressão`,firstLayerCompleteLabel:`Primeira camada concluída`,firstLayerCompleteDescription:`Notificar com foto quando a primeira camada terminar`,missingSpoolAssignmentLabel:`Atribuição de bobina ausente`,billingChargeFailedLabel:`Falha na cobrança`,billingChargeFailedDescription:`Notificar quando os custos de impressão não puderem ser registrados`,missingSpoolAssignmentDescription:`Notificar quando a impressão iniciar e bandejas necessárias não tiverem bobina atribuída`,printFailed:`Impressão Falhou`,printStopped:`Impressão Parada`,progressMilestones:`Marcos de Progresso`,progressMilestonesDescription:`Notificar em 25%, 50%, 75%`,printerOffline:`Impressora Offline`,printerError:`Erro da Impressora`,aiFailureDetection:`Detecção de Falhas por IA`,aiFailureDetectionDescription:`Notificar quando a IA do Obico detectar uma possível falha de impressão`,lowFilamentLabel:`Filamento Baixo`,maintenanceDue:`Manutenção Necessária`,maintenanceDueDescription:`Notificar quando manutenção for necessária`,amsHumidityHigh:`Umidade Alta do AMS`,amsHumidityHighDescription:`Umidade do AMS regular excede o limite`,amsTemperatureHigh:`Temperatura Alta do AMS`,amsTemperatureHighDescription:`Temperatura do AMS regular excede o limite`,amsDryingSuspendedTitle:`Secagem automática suspensa`,amsDryingSuspendedDescription:`A secagem automática desistiu de uma unidade AMS porque a umidade nunca ficou abaixo do limite`,amsHtHumidityHigh:`Umidade Alta do AMS-HT`,amsHtHumidityHighDescription:`Umidade do AMS-HT excede o limite`,amsHtTemperatureHigh:`Temperatura Alta do AMS-HT`,amsHtTemperatureHighDescription:`Temperatura do AMS-HT excede o limite`,inventoryAlerts:`Alertas de Estoque`,stockReorderAlert:`Alerta de Reposição`,stockReorderAlertDescription:`O SKU atingiu seu ponto de reposição`,stockBreakAlert:`Alerta de Ruptura de Estoque`,stockBreakAlertDescription:`O estoque se esgotará antes da chegada do reabastecimento`,jobAdded:`Trabalho Adicionado`,jobAddedDescription:`Trabalho adicionado à fila`,jobAssigned:`Trabalho Atribuído`,jobAssignedDescription:`Trabalho baseado em modelo atribuído à impressora`,jobStarted:`Trabalho Iniciado`,jobStartedDescription:`Trabalho da fila começou a imprimir`,jobWaiting:`Trabalho Aguardando`,jobWaitingDescription:`Trabalho aguardando filamento ou impressora`,jobSkipped:`Trabalho Pulado`,jobSkippedDescription:`Trabalho pulado (anterior falhou)`,jobFailed:`Trabalho Falhou`,jobFailedDescription:`Trabalho falhou ao iniciar`,queueComplete:`Fila Concluída`,queueCompleteDescription:`Todos os trabalhos da fila finalizados`,quietHours:`Horário de Silêncio`,noNotificationsDuring:`Sem notificações durante essas horas`,editProviderToChangeQuietHours:`Edite o provedor para alterar o horário de silêncio`,dailyDigest:`Resumo Diário`,batchNotifications:`Agrupar notificações em um único resumo diário`,sendAt:`Enviar às {{time}}`,editProviderToChangeDigestTime:`Edite o provedor para alterar o horário do resumo`,edit:`Editar`,deleteProvider:`Excluir Provedor de Notificação`,deleteConfirm:`Tem certeza que deseja excluir "{{name}}"? Isso não pode ser desfeito.`,delete:`Excluir`,addTitle:`Adicionar Provedor de Notificação`,editTitle:`Editar Provedor de Notificação`,nameLabel:`Nome *`,namePlaceholder:`Minhas Notificações`,providerTypeLabel:`Tipo de Provedor *`,configuration:`Configuração`,testConfiguration:`Testar Configuração`,printerFilter:`Filtro de Impressora`,onlyFromPrinter:`Enviar notificações apenas para eventos desta impressora`,quietHoursDnd:`Horário de Silêncio (Não Perturbe)`,quietStart:`Início`,quietEnd:`Fim`,dailyDigestLabel:`Resumo Diário`,sendDigestAt:`Enviar resumo às`,digestCollected:`Os eventos serão coletados e enviados como um único resumo neste horário`,notificationEvents:`Eventos de Notificação`,progressPercent:`(25%, 50%, 75%)`,bedCooledAfterPrint:`(após conclusão da impressão)`,haSensorAlert:`Alerta de sensor de impressora`,haSensorAlertDescription:`(um sensor do Home Assistant vinculado precisa de atenção)`,locationHaSensorAlert:`Alerta de sensor de local`,locationHaSensorAlertDescription:`(um sensor do Home Assistant vinculado a um local de armazenamento precisa de atenção)`,eventPriority:{sectionTitle:`Prioridade ntfy`,helpNtfy:`Escolha uma prioridade para cada evento habilitado. O ntfy usa isso para escalar alertas (som, visibilidade, comportamento push). Níveis não definidos aqui usam o padrão do servidor ntfy.`,min:`Mín`,low:`Baixa`,default:`Padrão`,high:`Alta`,urgent:`Urgente`},cancel:`Cancelar`,save:`Salvar`,add:`Adicionar`,nameRequired:`Nome é obrigatório`,fieldRequired:`{{field}} é obrigatório`,haDataInvalid:`O campo Data deve ser um objeto JSON válido, por ex. {"priority": "high", "ttl": 0}`,phoneNumber:`Número de Telefone`,apiKey:`Chave da API`,serverUrl:`URL do Servidor`,topic:`Tópico`,authToken:`Token de Autenticação`,userKey:`Chave do Usuário`,appToken:`Token do Aplicativo`,priority:`Prioridade`,pushoverRetry:`Repetição de emergência (s)`,pushoverExpire:`Expiração de emergência (s)`,botToken:`Token do Bot`,chatId:`ID do Chat`,telegramThreadId:`ID do tópico do fórum`,telegramThreadIdHelp:`Opcional. Envia para um único tópico de um grupo de fórum: o último número no link do tópico (t.me/c/.../25). Deixe vazio para o tópico Geral.`,telegramThreadIdInvalid:`O ID do tópico do fórum deve ser um número.`,smtpServer:`Servidor SMTP`,smtpPort:`Porta SMTP`,security:`Segurança`,authentication:`Autenticação`,username:`Usuário`,password:`Senha`,fromEmail:`E-mail de Origem`,toEmail:`E-mail de Destino`,webhookUrl:`URL do Webhook`,payloadFormat:`Formato do Payload`,authorization:`Autorização`,titleFieldName:`Nome do Campo de Título`,messageFieldName:`Nome do Campo de Mensagem`,editTemplate:`Editar Modelo: {{name}}`,titleLabel:`Título`,bodyLabel:`Corpo`,titlePlaceholder:`Título da notificação...`,bodyPlaceholder:`Corpo da notificação...`,availableVariables:`Variáveis Disponíveis`,clickToInsert:`Clique para inserir na posição do cursor no corpo`,livePreview:`Pré-visualização ao Vivo`,hide:`Ocultar`,show:`Mostrar`,loadingPreview:`Carregando pré-visualização...`,enterTemplateContent:`Insira o conteúdo do modelo para ver a pré-visualização`,titlePreview:`Título:`,bodyPreview:`Corpo:`,resetToDefault:`Restaurar Padrão`,titleRequired:`Título é obrigatório`,bodyRequired:`Corpo é obrigatório`,notificationLog:`Registro de Notificações`,showFailedOnly:`Apenas falhas`,last24Hours:`Últimas 24 horas`,last7Days:`Últimos 7 dias`,last30Days:`Últimos 30 dias`,last90Days:`Últimos 90 dias`,justNow:`Agora mesmo`,noFailedNotifications:`Nenhuma notificação com falha`,noNotificationsLogged:`Nenhuma notificação registrada`,unknownProvider:`Provedor Desconhecido`,logTitle:`Título`,logMessage:`Mensagem`,logError:`Erro`,logProvider:`Provedor: {{type}}`,logTime:`Hora: {{time}}`,refresh:`Atualizar`,clearOld:`Limpar Antigos`,statsSummary:`Últimos {{days}} dias:`,statsNotifications:`notificações`,statsSent:`{{count}} enviadas`,statsFailed:`{{count}} com falha`,eventTypes:{print_start:`Impressão Iniciada`,print_complete:`Impressão Concluída`,print_failed:`Impressão Falhou`,print_stopped:`Impressão Parada`,print_progress:`Progresso`,printer_offline:`Impressora Offline`,printer_error:`Erro da Impressora`,filament_low:`Filamento Baixo`,maintenance_due:`Manutenção Necessária`,test:`Teste`},userEmail:{title:`Notificações`,emailNotifications:`Notificações por E-mail`,emailNotificationsDesc:`Receba notificações por e-mail para seus próprios trabalhos de impressão. Os e-mails são enviados usando as configurações SMTP definidas na Autenticação Avançada.`,sendingTo:`As notificações serão enviadas para`,noEmailWarning:`Sua conta não tem um endereço de e-mail. Entre em contato com um administrador para adicionar um.`,printJobNotifications:`Notificações de Trabalhos de Impressão`,printJobNotificationsDesc:`Escolha quais eventos acionam notificações por e-mail para os trabalhos de impressão que você envia.`,printJobStarts:`Início do Trabalho de Impressão`,printJobStartsDesc:`Ser notificado quando seu trabalho de impressão começar.`,printJobFinishes:`Conclusão do Trabalho de Impressão`,printJobFinishesDesc:`Ser notificado quando seu trabalho de impressão concluir com sucesso.`,printErrors:`Erros de Impressão`,printErrorsDesc:`Ser notificado quando seu trabalho de impressão falhar ou encontrar um erro.`,printJobStops:`Trabalho de Impressão Parado`,printJobStopsDesc:`Ser notificado quando seu trabalho de impressão for cancelado ou parado.`,saveSuccess:`Preferências de notificação salvas.`,saveError:`Falha ao salvar preferências de notificação.`}},richTextEditor:{bold:`Negrito`,italic:`Itálico`,underline:`Sublinhado`,bulletList:`Lista com marcadores`,numberedList:`Lista numerada`,alignLeft:`Alinhar à esquerda`,alignCenter:`Centralizar`,alignRight:`Alinhar à direita`,addLink:`Adicionar link`,removeLink:`Remover link`},externalLinks:{title:`Links da barra lateral`,sidebarLayout:`Barra lateral`,sidebarLayoutDescription:`Mostre ou oculte páginas integradas, adicione links externos e arraste itens para reordenar a navegação lateral.`,systemPages:`Páginas do Bambuddy`,externalLinks:`Links externos`,visibleInSidebar:`Visível na barra lateral`,hiddenFromSidebar:`Oculto na barra lateral`,requiredInSidebar:`Obrigatório na barra lateral`,hidePage:`Ocultar página`,showPage:`Mostrar página`,settingsCannotBeHidden:`Configurações não pode ser ocultado`,noLinksConfigured:`Nenhum link externo configurado`,deleteLink:`Excluir link`,removeCustomIcon:`Remover ícone personalizado`,openInNewTab:`Abrir em nova aba`,placeholders:{linkName:`Meu Link`}},keyboardShortcuts:{title:`Atalhos de Teclado`,navigation:`Navegação`,archivesSection:`Arquivos`,kProfilesSection:`Perfis K`,generalSection:`Geral`,shortcuts:{goToPrinters:`Ir para Impressoras`,goToArchives:`Ir para Arquivos`,goToQueue:`Ir para Fila`,goToStats:`Ir para Estatísticas`,goToProfiles:`Ir para Perfis na Nuvem`,goToSettings:`Ir para Configurações`,focusSearch:`Focar na pesquisa`,openUploadModal:`Abrir modal de upload`,clearSelection:`Limpar seleção / desfocar input`,contextMenu:`Menu de contexto nos cartões`,refreshProfiles:`Atualizar perfis`,newProfile:`Novo perfil`,exitSelectionMode:`Sair do modo de seleção`,showHelp:`Mostrar esta ajuda`},footer:`Pressione Esc ou clique fora para fechar`},notificationLog:{title:`Registro de Notificações`,events:{printStarted:`Impressão Iniciada`,printComplete:`Impressão Concluída`,printFailed:`Impressão Falhou`,printStopped:`Impressão Interrompida`,progress:`Progresso`,printerOffline:`Impressora Offline`,printerError:`Erro na Impressora`,lowFilament:`Filamento Baixo`,maintenanceDue:`Manutenção Pendente`,test:`Teste`},timeAgo:{justNow:`Agora mesmo`,minutesAgo:`há {{minutes}} minutos`,hoursAgo:`há {{hours}} horas`}},restoreBackup:{title:`Restaurar Backup`,restoring:`Restaurando...`,restoreComplete:`Restauração Concluída`,restoreFailed:`Falha na Restauração`,importSettings:`Importar configurações de um arquivo de backup`,pleaseWait:`Aguarde enquanto seus dados estão sendo restaurados`,clickToSelect:`Clique para selecionar o arquivo de backup (.json ou .zip)`,howDuplicateHandling:`Como funciona o tratamento de duplicatas:`,categories:{printers:`Impressoras`,smartPlugs:`Tomadas Inteligentes`,notificationProviders:`Provedores de Notificação`,filaments:`Filamentos`,archives:`Arquivos`,pendingUploads:`Uploads Pendentes`,settingsTemplates:`Configurações e Modelos`},matchingInfo:{printers:`correspondem pelo número de série`,smartPlugs:`correspondem pelo endereço IP`,notificationProviders:`correspondem pelo nome`,filaments:`correspondem pelo nome + tipo + marca`,archives:`correspondem pelo hash do conteúdo`,pendingUploads:`correspondem pelo nome do arquivo`,settingsTemplates:`sempre sobrescrito`},replaceExisting:`Substituir dados existentes`,keepExisting:`Manter dados existentes`,replaceDescription:`Substituir itens que já existem com os dados do backup`,keepDescription:`Restaurar apenas itens que não existem`,caution:`Atenção:`,cautionText:`Sobrescrever substituirá suas configurações atuais pelos dados do backup. Os códigos de acesso da impressora nunca são sobrescritos por segurança.`,itemsRestored:`Itens Restaurados`,itemsSkipped:`Itens Ignorados`,restored:`Restaurado`,skipped:`Ignorado (já existe)`,filesLabel:`Arquivos (3MF, miniaturas, etc.)`,newApiKeysGenerated:`Novas Chaves API Geradas`,newApiKeysWarning:`Essas chaves são exibidas apenas uma vez. Copie-as agora!`,processingBackup:`Processando arquivo de backup...`,noDataFound:`Nenhum dado foi encontrado para restaurar no arquivo de backup.`,failedToRestore:`Falha ao restaurar o backup. Verifique o formato do arquivo.`},backupExport:{title:`Exportar Backup`,selectData:`Selecione os dados a incluir`,selectAll:`Selecionar Todos`,selectNone:`Selecionar Nenhum`,categoryDescriptions:{settings:`Idioma, tema, preferências de atualização`,notifications:`ntfy, Pushover, Discord, etc.`,templates:`Modelos de mensagens personalizadas`,smartPlugs:`Configurações de tomadas Tasmota`,externalLinks:`Links da barra lateral para serviços externos`,printers:`Informações da impressora (códigos de acesso excluídos)`,plateDetection:`Imagens de referência de placa vazia`,filaments:`Tipos e custos de filamento`,maintenance:`Cronogramas de manutenção personalizados`,archives:`Todos os dados de impressão + arquivos (3MF, miniaturas, fotos)`,projects:`Projetos, itens de BOM e anexos`,pendingUploads:`Uploads de impressora virtual aguardando revisão`,apiKeys:`Chaves API de webhook (novas chaves geradas na importação)`},requiresPrinters:`Requer que as impressoras sejam selecionadas`,zipFileWarning:`Um arquivo ZIP será criado.`,zipFileDescription:`Inclui todos os arquivos 3MF, miniaturas, timelapses e fotos. Isso pode levar algum tempo e resultar em um arquivo grande.`,includeAccessCodes:`Incluir Códigos de Acesso`,includeAccessCodesDescription:`Para transferir para outra máquina`,includeAccessCodesWarning:`Os códigos de acesso serão incluídos em texto simples. Mantenha este arquivo de backup seguro!`,categoriesSelected:`{{selectedCount}} categorias selecionadas`},pendingUploads:{placeholders:{notes:`Adicione notas sobre esta impressão...`},discardUpload:`Descartar Upload`,archiveAllUploads:`Arquivar Todos os Uploads`,discardAllUploads:`Descartar Todos os Uploads`,archive:`Arquivar`,timeAgo:{justNow:`Agora mesmo`,minutesAgo:`há {{minutes}} minutos`,hoursAgo:`há {{hours}} horas`,daysAgo:`há {{days}} dias`}},apiBrowser:{placeholders:{requestBody:`Corpo da requisição JSON...`,searchEndpoints:`Pesquisar endpoints...`}},configureAmsSlot:{title:`Configurar Slot AMS`,slotConfigured:`Slot Configurado!`,configuringSlot:`Configurando slot:`,slotLabel:`{{ams}} – Slot {{slot}}`,searchPresets:`Pesquisar predefinições...`,colorPlaceholder:`Nome da cor ou hex (ex.: marrom, FF8800)`,clearCustomColor:`Limpar cor personalizada`,noCloudPresets:`Nenhuma predefinição na nuvem. Faça login no Bambu Cloud para sincronizar.`,noPresetsAvailable:`Nenhuma predefinição disponível. Faça login no Bambu Cloud ou importe perfis locais.`,noMatchingPresets:`Nenhuma predefinição correspondente encontrada.`,custom:`Personalizado`,builtin:`Integrado`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Configurações enviadas para a impressora`,filamentProfile:`Perfil de Filamento`,kProfileLabel:`Perfil K (Avanço de Pressão)`,filteringFor:`Filtrando por: {{material}}`,noKProfile:`Nenhum perfil K (usar padrão 0.020)`,noMatchingKProfiles:`Nenhum perfil K correspondente encontrado. O K padrão=0.020 será usado.`,otherKProfiles:`Outros perfis K nesta impressora`,selectFilamentFirst:`Selecione um perfil de filamento primeiro`,kFromCalibration:`K={{value}} da calibração da impressora`,customColorLabel:`Cor Personalizada (opcional)`,presetColors:`Cores de {{name}}:`,showLessColors:`Mostrar menos cores`,showMoreColors:`Mostrar mais cores`,clear:`Limpar`,hexLabel:`Hex – #{{hex}}`,resetting:`Redefinindo...`,resetSlot:`Redefinir Slot`,cancel:`Cancelar`,configuring:`Configurando...`,configureSlot:`Configurar Slot`},githubBackup:{title:`Backup do Git`,history:`Histórico`,downloadBackup:`Baixar Backup`,restoreBackup:`Restaurar Backup`,noBackupsYet:`Nenhum backup ainda`},emailSettings:{placeholders:{fromName:`Bambuddy`}},tagManagement:{searchTags:`Pesquisar tags...`,renameTag:`Renomear tag`,deleteTag:`Excluir tag`},notificationTemplates:{placeholders:{title:`Título da notificação...`,body:`Corpo da notificação...`}},batchTag:{placeholders:{newTag:`Digite uma nova tag...`}},photoGallery:{deletePhoto:`Excluir foto`},filamentHoverCard:{copySpoolUuid:`Copiar UUID do carretel`},kProfilesView:{hasNote:`Possui nota`,copyProfile:`Copiar perfil`},layout:{openMenu:`Abrir menu`,noPermissionSystemInfo:`Você não tem permissão para visualizar informações do sistema`},dashboard:{dragToReorder:`Arrastar para reordenar`,hideWidget:`Ocultar widget`},notificationProviderCard:{deleteNotificationProvider:`Excluir provedor de notificação`},fileManagerModal:{closeFileManager:`Fechar gerenciador de arquivos`,sortFiles:`Ordenar arquivos`,goToParentFolder:`Ir para a pasta pai`,threeView:`Visualização 3D`},embeddedCameraViewer:{refreshStream:`Atualizar stream`,close:`Fechar`,zoomOut:`Reduzir zoom`,resetZoom:`Redefinir zoom`,zoomIn:`Aumentar zoom`,dragToResize:`Arrastar para redimensionar`},timelapseViewer:{skipBack5s:`Voltar 5s`,skipForward5s:`Avançar 5s`},notificationProviders:{descriptions:{email:`Notificações por email SMTP`,telegram:`Notificações via bot do Telegram`,discord:`Enviar para canal do Discord via webhook`,ntfy:`Notificações push gratuitas e auto-hospedáveis`,pushover:`Notificações push simples e confiáveis`,callmebot:`Notificações gratuitas via WhatsApp pelo CallMeBot`,webhook:`POST HTTP genérico para qualquer URL`}},logViewer:{searchPlaceholder:`Pesquisar mensagem ou nome do logger...`,noLogEntries:`Nenhuma entrada de log encontrada`},switchbarPopover:{noSwitchesInSwitchbar:`Nenhum switch na barra de switches`},projectPageModal:{placeholders:{title:`Título`,designer:`Designer`,license:`Licença`,description:`Digite a descrição...`,profileTitle:`Título do perfil`,profileDescription:`Descrição do perfil...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`Aguardando`,justNow:`Agora mesmo`,now:`Agora`,minsAgo:`{{count}}min atrás`,inMins:`em {{count}}min`,hoursAgo:`{{count}}h atrás`,inHours:`em {{count}}h`,daysAgo:`{{count}}d atrás`,inDays:`em {{count}}d`},spoolbuddy:{nav:{dashboard:`Painel`,ams:`AMS`,inventory:`Inventário`,writeTag:`Escrever`,settings:`Configurações`},status:{nfcReady:`NFC pronto`,nfcOff:`NFC desligado`,offline:`Offline`,online:`Online`,noPrinters:`Sem impressoras`,deviceOffline:`Dispositivo offline`,waitingConnection:`Aguardando conexão do dispositivo...`,systemReady:`Sistema pronto`,status:`Status`},dashboard:{readyToScan:`Pronto para escanear`,idleMessage:`Coloque um carretel na balança para identificá-lo`,nfcHint:`A tag NFC será lida automaticamente`,device:`Dispositivo`,syncWeight:`Sincronizar peso`,weightSynced:`Sincronizado!`,unknownTag:`Tag desconhecida`,newTag:`Nova tag detectada`,onScale:`na balança`,linkSpool:`Vincular ao carretel`,linkTagTitle:`Vincular tag ao carretel`,linkTag:`Vincular tag`,selectSpool:`Selecione um carretel para vincular a esta tag:`,noUntagged:`Nenhum carretel sem tag encontrado`,tagDetected:`Tag detectada`,noTag:`Sem tag`,tagId:`Etiqueta`,grossWeight:`Peso bruto`,spoolSize:`Tamanho do carretel`,close:`Fechar`,currentSpool:`Carretel Atual`,plateReady:`Mesa pronta: {{name}}`,plateReadyLabel:`Mesas para liberar`,plateClearAction:`Liberar`,plateClearedToast:`Mesa marcada como limpa`,plateClearFailed:`Não foi possível marcar a mesa como limpa`},modal:{spoolDetected:`Carretel Detectado`,assignToAms:`Atribuir ao AMS`,syncWeight:`Sincronizar Peso`,weightSynced:`Sincronizado!`,syncing:`Sincronizando...`,newTagDetected:`Nova Tag Detectada`,addToInventory:`Adicionar ao Inventário`,assignToAmsTitle:`Atribuir ao AMS`,selectSlot:`Selecionar um slot`,assign:`Atribuir`,assigning:`Atribuindo...`,assignSuccess:`Atribuído!`,assignPendingInsert:`Atribuído. O slot será configurado quando você inserir o carretel.`,assignError:`Falha ao atribuir carretel. Tente novamente.`,noPrinterSelected:`Selecionar uma impressora...`,noAmsDetected:`Nenhum AMS detectado nesta impressora`,slot:`Slot`},weight:{noReading:`Sem leitura`,stable:`Estável`,measuring:`Medindo...`,tare:`Tarar`,calibrate:`Calibrar`},spool:{remaining:`Restante`,material:`Material`,brand:`Marca`,color:`Cor`,coreWeight:`Núcleo`,labelWeight:`Rótulo`,scaleWeight:`Balança`,netWeight:`Líquido`,lastUsed:`Último uso`,unknownColor:`Cor desconhecida`},ams:{noData:`Nenhum AMS detectado`,connectAms:`Conecte um AMS para ver os slots`,noPrinter:`Nenhuma impressora selecionada`,selectPrinter:`Selecione uma impressora na barra superior`,printerDisconnected:`Impressora desconectada`,humidity:`Umidade`,level:`Nível`,active:`Ativo`,slot:`Slot`,empty:`Vazio`},inventory:{search:`Buscar carretéis...`,empty:`Nenhum carretel no inventário`,noResults:`Nenhum carretel correspondente`,spools:`carretéis`,addSpool:`Adicionar carretel`},settings:{tabDevice:`Dispositivo`,tabDisplay:`Tela`,tabScale:`Balança`,tabUpdates:`Atualizações`,nfcReader:`Leitor NFC`,type:`Tipo`,connection:`Conexão`,notConnected:`N/D`,deviceInfo:`Info do dispositivo`,hostname:`Host`,uptime:`Tempo de atividade`,brightness:`Brilho`,saved:`Salvo`,noBacklight:`Nenhuma retroiluminação DSI detectada. O controle de brilho requer uma tela DSI.`,screenBlank:`Tempo para desligar tela`,screenBlankDesc:`A tela desliga após inatividade. Toque para despertar.`,displayNote:`O brilho é aplicado como filtro de software.`,scaleCalibration:`Calibração da balança`,currentWeight:`Peso atual`,tareOffset:`Tara`,calFactor:`Fator`,knownWeight:`Peso conhecido`,calStep1:`Remova todos os itens da balança e pressione Definir zero.`,calStep2:`Coloque o peso conhecido na balança.`,setZero:`Definir zero`,calibrateNow:`Calibrar`,calibrated:`Calibrado`,tareSet:`Comando de tara enviado. Aguardando dispositivo...`,tareComplete:`Tara concluída!`,tareTimedOut:`Tempo esgotado para a tara — o daemon do SpoolBuddy está em execução?`,tareFailed:`Falha ao enviar comando de tara`,zeroSet:`Ponto zero definido. Coloque o peso conhecido na balança.`,calibrationDone:`Calibração concluída!`,calibrationFailed:`Falha na calibração`,lastCalibrated:`Última calibração`,stable:`Estável`,settling:`Estabilizando...`,firmware:`Firmware`,scale:`Balança`,noDevice:`Nenhum dispositivo SpoolBuddy encontrado`,daemonVersion:`Versão do daemon`,currentVersion:`Atual`,versionPending:`Aguardando daemon...`,checking:`Verificando...`,checkUpdates:`Verificar atualizações`,updateAvailable:`Atualização disponível`,updateInstructions:`Atualize via SSH: execute o script de instalação do SpoolBuddy.`,upToDate:`Atualizado`,includeBeta:`Incluir versões beta`,systemConfig:`Backend e autenticação`,backendUrl:`URL do backend Bambuddy`,apiToken:`Token de API`,apiTokenPlaceholder:`Insira o token de API`,saveConfig:`Salvar configuração`,systemQueued:`Configuração enfileirada.`,systemFieldsRequired:`URL do backend é obrigatória.`,nfcDiagnostic:`Diagnóstico NFC`,scaleDiagnostic:`Diagnóstico da balança`,readTagDiagnostic:`Diagnóstico de leitura de tag`,testNfc:`Testar leitor`,testScale:`Testar precisão`,testReadTag:`Ler tag`},writeTag:{tabExisting:`Bobina existente`,tabNew:`Nova bobina`,tabReplace:`Substituir tag`,searchPlaceholder:`Buscar por material, cor, marca...`,noUntaggedSpools:`Nenhuma bobina sem tag`,noTaggedSpools:`Nenhuma bobina com tag`,selectSpool:`Selecione uma bobina e coloque um NTAG no leitor`,placeTag:`Coloque um NTAG no leitor`,tagReady:`Tag detectado — pronto para gravar`,writeTag:`Gravar Tag`,replaceTag:`Substituir Tag`,writing:`Gravando tag...`,waiting:`Aguardando SpoolBuddy...`,writeSuccess:`Tag gravado com sucesso!`,writeFailed:`Falha na gravação`,queueFailed:`Falha ao enfileirar comando de gravação`,tryAgain:`Tentar novamente`,cancel:`Cancelar`,replaceWarning:`O tag antigo será desvinculado. O novo tag o substituirá.`,deviceOffline:`SpoolBuddy está offline`,material:`Material`,colorName:`Nome da cor`,color:`Cor`,brand:`Marca`,weight:`Peso (g)`,createSpool:`Criar bobina`,creating:`Criando...`,spoolCreated:`Bobina criada! Pronto para gravar.`,createFailed:`Falha ao criar bobina`,incompleteDataWarning:`Tag gravada com dados Spoolman incompletos`},quickMenu:{printerPower:`Energia da impressora`,systemControls:`Sistema`,restartDaemon:`Reiniciar daemon`,restartBrowser:`Reiniciar navegador`,reboot:`Reiniciar`,shutdown:`Desligar`,swipeToClose:`Deslize para baixo para fechar`,confirmTitle:`Confirmar`,confirmShutdown:`Tem certeza de que deseja desligar o SpoolBuddy? Você precisará de acesso físico para ligá-lo novamente.`,confirmReboot:`Tem certeza de que deseja reiniciar o SpoolBuddy?`,confirmRestartDaemon:`Reiniciar o daemon do SpoolBuddy? NFC e balança ficarão temporariamente indisponíveis.`,confirmRestartBrowser:`Reiniciar o navegador kiosk? A tela ficará brevemente preta.`,confirm:`Confirmar`,confirmPlugOn:`Ligar {{name}}?`,confirmPlugOff:`Desligar {{name}}?`,turnOn:`Ligar`,turnOff:`Desligar`}},diagnostic:{modalTitle:`Diagnóstico de conexão — {{name}}`,running:`Executando diagnóstico...`,runningElapsed:`Executando diagnóstico... ({{elapsed}}s)`,waitingForReportHint:`Aguardando a impressora publicar um relatório de status — pode levar até {{max}} segundos.`,runFailed:`Não foi possível executar o diagnóstico: {{error}}`,retry:`Executar novamente`,runButton:`Executar diagnóstico`,sectionTitle:`Diagnóstico de conexão`,sectionDescription:`Verifique por que uma impressora não conecta ou não imprime — acessibilidade das portas, modo desenvolvedor LAN, modo de rede Docker e credenciais.`,noPrinters:`Nenhuma impressora configurada.`,overall:{ok:`Nenhum problema encontrado — a conexão da impressora parece saudável.`,warnings:`A impressora deve funcionar, mas alguns pontos exigem atenção.`,problems:`Foram encontrados problemas que explicam por que a impressora não conecta ou não imprime.`},check:{port_mqtt:{title:`Porta de controle (MQTT 8883)`,pass:`Acessível — a impressora está aceitando conexões de controle.`,fail:`A porta 8883 está inacessível. A impressora está desligada, em outro endereço IP, ou um firewall está bloqueando. Verifique o IP da impressora e se nada bloqueia a porta 8883.`},port_ftps:{title:`Porta de transferência de arquivos (FTPS 990)`,pass:`Acessível — o envio de arquivos de impressão funcionará.`,warn:`A porta 990 está inacessível. O monitoramento ainda pode funcionar, mas o envio de impressões para a impressora falhará. Verifique se a porta 990 não está bloqueada.`,warn_no_tls:`A porta 990 está aberta, mas o serviço de arquivos da impressora não conclui o handshake TLS. Os arquivos de impressão, as capas e os timelapses não podem ser obtidos, então os arquivos ficam vazios. Reinicie a impressora — desbloquear a porta não resolve.`},external_storage:{title:`Armazenar arquivos enviados no armazenamento externo (passo 4 da instalação)`,pass:`A impressora informa que esta opção está ligada — os arquivos enviados serão armazenados no cartão SD e os arquivos terão miniaturas e metadados do fatiador.`,fail:`A impressora informa que esta opção está desligada. Ative "Armazenar arquivos enviados no armazenamento externo" — em firmwares recentes (P2S 01.02 / Bambu Studio 2.6+) o interruptor fica nas Configurações de Impressão da impressora; em versões mais antigas, está na aba Dispositivo do Bambu Studio / OrcaSlicer. Sem essa opção, cada impressão arquivada fica sem miniatura nem metadados do fatiador.`,skip:`Não verificado — é necessária uma conexão MQTT ativa. Em fatiadores mais antigos onde essa configuração existe apenas no fatiador, a impressora não a reporta, então esta verificação passa mesmo com a opção desligada — verifique o passo 4 da instalação manualmente.`,skip_unsupported_model:`Este modelo tem slot SD mas nenhuma forma de ativar a opção — o firmware atual da série P1 não mostra o botão no Bambu Studio e a impressora não tem tela. Não há nada a corrigir aqui; as impressões arquivadas podem ficar sem miniaturas e metadados do fatiador até que a Bambu Lab adicione suporte por firmware.`,fail_no_media:`A opção está ligada, mas a impressora não detecta cartão nem pendrive no slot, então os arquivos enviados não têm para onde ir. Insira um e imprima novamente — até lá, toda impressão arquivada ficará sem miniatura e sem metadados do fatiador.`,warn_internal_storage:`A opção está ligada e há armazenamento presente, mas a última impressão ainda assim foi para o armazenamento interno da impressora, que o Bambuddy não consegue ler. Na série H2, na P2S e na X2D o botão «Imprimir» do Bambu Studio sempre envia para lá, independentemente desta opção. As impressões são arquivadas com nome e tempos, mas sem miniatura nem metadados do fatiador. Para arquivos completos, inicie as impressões pelo Bambuddy ou fatie no OrcaSlicer, ou então no Bambu Studio use «Enviar» com «Externo» e inicie a impressão depois.`,warn_internal_history:`A opção está ligada e há armazenamento, mas a última impressão saiu de um arquivo que já estava na impressora: uma reimpressão pela tela dela, um início pelo Handy ou um arquivo enviado antes. Essa biblioteca fica no armazenamento interno, que o Bambuddy não consegue ler, e nenhuma opção muda isso, porque nada foi enviado para essa impressão. Ela continua arquivada com nome e tempos, mas sem miniatura nem metadados do fatiador. Para arquivos completos, inicie as impressões pelo Bambuddy ou envie-as pelo fatiador.`},port_rtsps:{title:`Porta da câmera ({{protocol}} {{port}})`,pass:`Acessível — o streaming da câmera funcionará.`,warn:`A porta {{port}} está inacessível. A visualização ao vivo da câmera não funcionará. Isso não afeta a impressão.`},macos_local_network:{title:`Permissão de rede local do macOS`,pass:`O macOS está permitindo que o Bambuddy alcance a rede local.`,warn_unsigned:`O Python que executa o Bambuddy não tem assinatura de código, então o macOS não tem a que vincular a permissão de rede local e descarta silenciosamente todas as conexões com a impressora — sem erro e sem solicitação. Execute o atualizador do Bambuddy (install/update_macos.sh), que faz a assinatura, e reinicie o Bambuddy. Interpretador: {{executable}}`,warn_permission:`Se a impressora estiver ligada e acessível neste endereço, abra Ajustes do Sistema > Privacidade e Segurança > Rede Local e verifique se o Python do Bambuddy está ativado. Caso contrário, o macOS descarta conexões locais em silêncio, e atualizar o Python pode deixar a permissão antiga para trás.`},network_mode:{title:`Modo de rede do contêiner`,genericRuntime:`um contêiner`,pass:`Executando em {{runtime}} com rede host.`,warn:`O Bambuddy está sendo executado em {{runtime}} com rede bridge. A descoberta de impressoras e a impressora virtual precisam da rede host — recrie o contêiner com rede host ("network_mode: host" no docker-compose, "--network=host" no Podman).`,skip:`Não está sendo executado em um contêiner — não aplicável.`,skip_unknown:`O Bambuddy está sendo executado em {{runtime}}, mas não foi possível determinar o modo de rede. Se a descoberta de impressoras ou a impressora virtual não funcionarem, recrie o contêiner com rede host.`,skip_system_container:`O Bambuddy está sendo executado em um contêiner de sistema {{runtime}}, que fica na LAN como uma máquina virtual — não aplicável.`},subnet:{title:`Sub-rede`,pass:`A impressora e o Bambuddy estão na mesma sub-rede.`,warn:`A impressora ({{printer_ip}}) e o Bambuddy ({{host_ip}}) estão em sub-redes diferentes. Eles podem não se alcançar, a menos que o roteamento entre as sub-redes esteja configurado.`,skip:`Não foi possível determinar a sub-rede — ignorado.`},mqtt_auth:{title:`Credenciais da impressora`,pass:`A impressora aceitou a conexão.`,fail:`A impressora está acessível mas o Bambuddy não está conectado a ela. O código de acesso ou o número de série provavelmente está incorreto — o código de acesso muda toda vez que o modo Somente LAN ou o Modo Desenvolvedor é alternado, então copie-o novamente da tela da impressora. Uma impressora reiniciando, ou que já atingiu seu limite de conexões simultâneas, aparece do mesmo jeito.`,fail_auth_rejected:`A impressora recusou as credenciais do Bambuddy. O código de acesso ou o número de série está incorreto — o código de acesso muda toda vez que o modo Somente LAN ou o Modo Desenvolvedor é alternado. Copie-o novamente da tela da impressora e salve-o nas configurações da impressora.`,skip:`Não verificado — não foi possível alcançar a impressora.`},developer_mode:{title:`Modo Desenvolvedor LAN`,pass:`O Modo Desenvolvedor está ativado.`,fail:`O Modo Desenvolvedor está DESLIGADO na impressora. Ative-o nas configurações de LAN da impressora — e confirme com OK. Sem ele, as impressões não iniciarão.`,skip:`Não foi possível verificar — requer uma conexão ativa com a impressora.`},printer_publishing:{title:`Impressora publicando status`,pass:`A impressora está publicando atualizações de status — AMS, filamentos e perfis K serão espelhados corretamente para o slicer.`,fail:`O broker MQTT aceitou a conexão, mas a impressora não publicou nenhum relatório de status. Quase sempre é um número de série errado ou com maiúsculas/minúsculas incorretas — o tópico device/<serial>/report diferencia maiúsculas de minúsculas. Verifique o número de série nas configurações da impressora comparando com a tela do equipamento.`,skip:`Não foi possível verificar — requer uma conexão ativa com a impressora.`}}},systemHealth:{sectionTitle:`Saúde do sistema`,sectionDescription:`Analisa os logs recentes em busca de problemas conhecidos que você normalmente pode resolver sozinho, antes que virem um chamado de suporte.`,rescan:`Analisar novamente`,clean:`Nenhum problema conhecido encontrado nas últimas {{times}} entradas de log.`,logUnavailable:`O registro em arquivo está desativado, então os logs não podem ser analisados. Ative o registro em arquivo para usar esta verificação.`,learnMore:`Como corrigir`,fixLabel:`Correção:`,occurrences:`Visto {{times}}× — última vez às {{lastSeen}}`,category:{layer8:`Você pode corrigir isto`,environment:`Ambiente`,bug:`Por favor, relate isto`},signature:{"ftp-auth-rejected":{name:`A impressora rejeitou o código de acesso`,cause:`A impressora recusou o login de transferência de arquivos. O código de acesso está errado ou mudou após alternar o Modo Desenvolvedor.`,fix:`Copie novamente o código de acesso da tela da impressora (configurações de LAN) e atualize-o nas configurações da impressora no Bambuddy.`},"ftp-connection-timeout":{name:`Tempo limite da conexão de transferência de arquivos`,cause:`O Bambuddy não conseguiu acessar a porta de transferência de arquivos da impressora (FTPS 990). A porta está bloqueada, ou a impressora está desligada ou em outra sub-rede.`,fix:`Verifique se nada bloqueia a porta 990 entre o Bambuddy e a impressora e se ambos estão na mesma rede.`},"ftp-ssl-error":{name:`Falha no handshake seguro de transferência de arquivos`,cause:`O serviço de arquivos da impressora respondeu na porta 990 sem TLS. O servidor de arquivos dela travou: é uma falha da impressora, não do firewall nem do firmware.`,fix:`Reinicie a impressora. Até lá, arquivos de impressão, capas e timelapses não podem ser baixados; a impressão em si não é afetada.`},"bambu-cloud-captcha":{name:`O Bambu Cloud está pedindo um CAPTCHA`,cause:`A proteção antiabuso do Bambu está verificando esta rede, então nenhum login no Bambu Cloud consegue ser concluído. Isso depende do endereço IP público, não da sua conta nem desta instalação.`,fix:`Aguarde: costuma passar em algumas horas e novas tentativas prolongam o bloqueio. Enquanto isso, conecte-se com um token de acesso obtido em uma sessão do navegador.`},"mqtt-connection-flapping":{name:`A conexão com a impressora cai repetidamente`,cause:`A conexão de controle (MQTT 8883) desconecta e reconecta repetidamente — geralmente por uma rede fraca ou uma porta parcialmente bloqueada.`,fix:`Verifique o sinal de Wi-Fi perto da impressora, prefira uma conexão com fio e certifique-se de que a porta 8883 esteja acessível de forma confiável.`},"camera-connection-refused":{name:`Transmissão da câmera inacessível`,cause:`Não foi possível acessar a câmera ao vivo na porta RTSPS 322. A porta está bloqueada, ou a câmera ou a visualização ao vivo via LAN está desativada na impressora.`,fix:`Ative a câmera e a visualização ao vivo via LAN na impressora e verifique se a porta 322 não está bloqueada. Isso não afeta a impressão.`},"database-locked":{name:`Conflitos de gravação no banco de dados`,cause:`O banco de dados SQLite apresenta erros "database is locked" sob carga — comum ao usar várias impressoras ao mesmo tempo.`,fix:`Migre o Bambuddy para um banco de dados PostgreSQL externo. Consulte o guia do PostgreSQL na documentação.`}}},vpDiagnostic:{title:`Verificação de configuração — {{name}}`,runButton:`Executar verificação de configuração`,running:`Executando verificação de configuração...`,runFailed:`Não foi possível executar a verificação de configuração: {{error}}`,retry:`Verificar novamente`,overall:{ok:`Todas as verificações passaram — esta impressora virtual está configurada corretamente.`,warnings:`A impressora virtual deve funcionar, mas alguns pontos precisam de atenção.`,problems:`Foram encontrados problemas que explicam por que o slicer não consegue ver ou usar esta impressora virtual.`},check:{enabled:{title:`Impressora virtual habilitada`,fail:`Esta impressora virtual está desligada. Ative-a para torná-la detectável.`},running:{title:`Serviços em execução`,fail:`A impressora virtual está habilitada, mas seus serviços não estão em execução. Verifique o log do Bambuddy — geralmente um conflito de IP de vínculo ou um erro de permissão os interrompe.`},bind_interface:{title:`Interface de rede de vínculo`,fail:`A interface de vínculo não está definida ou não existe mais neste host. Escolha uma interface atual no menu "Interface de vínculo".`},access_code:{title:`Código de acesso definido`,fail:`Nenhum código de acesso definido. O slicer precisa receber o mesmo código de acesso de 8 caracteres que você define aqui.`},target_printer:{title:`Impressora de destino`,fail:`Nenhuma impressora de destino selecionada. O modo proxy precisa de uma impressora real para a qual encaminhar.`,warn:`A impressora de destino está offline no momento — o encaminhamento será retomado quando ela se reconectar.`},port_ftps:{title:`Serviço de upload de arquivos (porta {{port}})`,fail:`Nada está escutando na porta {{port}} do IP de vínculo, então o slicer não consegue enviar arquivos. A causa habitual é um conflito de porta nesta interface.`},port_mqtt:{title:`Serviço de controle (porta {{port}})`,fail:`Nada está escutando na porta {{port}} do IP de vínculo, então o slicer não consegue conectar nem mostrar o status.`},port_bind:{title:`Serviço de descoberta (porta {{port}})`,fail:`Nada está escutando na porta {{port}} do IP de vínculo, então a negociação de descoberta do slicer falha.`},privileged_ports:{title:`Vinculação a portas privilegiadas`,fail:`A porta {{port}} está abaixo de 1024 e este serviço não tem permissão para vinculá-la, por isso nada está escutando acima. Adicione AmbientCapabilities=CAP_NET_BIND_SERVICE em /etc/systemd/system/bambuddy.service e reinicie, ou execute "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))". No Docker, adicione cap_add: [NET_BIND_SERVICE].`},certificate:{title:`Certificado TLS`,pass:`Certificado pronto. Verifique se o certificado CA do Bambuddy (acima) está importado no armazenamento de confiança do seu slicer.`,fail:`O certificado TLS desta impressora virtual está ausente. Verifique se o diretório de dados do Bambuddy tem permissão de escrita.`}}},bugReport:{logHealthSummary:`Problemas conhecidos encontrados nos seus logs`,logHealthIntro:`Os logs recentes correspondem a problemas conhecidos. Veja as correções abaixo — resolvê-las pode solucionar seu problema sem um relatório de bug. Você ainda pode enviar um relatório abaixo.`,title:`Reportar um bug`,description:`Descrição`,descriptionPlaceholder:`O que deu errado? Por favor, descreva o problema...`,email:`Email (opcional)`,emailPlaceholder:`seu@email.com.br`,emailPrivacy:`Se fornecido, seu email será incluído em uma seção recolhida da issue no GitHub para que o mantenedor possa entrar em contato.`,screenshot:`Captura de tela`,uploadOrPaste:`Enviar, colar ou arrastar uma imagem`,dataCollectedSummary:`Quais dados são incluídos no relatório?`,dataIncluded:`Incluídos:`,dataIncludedList:`Versão do app, SO, arquitetura, versão Python, estatísticas do banco de dados (apenas contagens), modelos de impressora, quantidade de bicos, versões de firmware, status de conexão, status de integrações (Spoolman, MQTT, HA), configurações não sensíveis, contagem de interfaces de rede, detalhes Docker, versões de dependências.`,dataNeverIncluded:`Nunca incluídos:`,dataNeverIncludedList:`Nomes de impressoras, números de série, códigos de acesso, senhas, endereços IP, endereços de email, chaves de API, tokens, URLs de webhook, nomes de host ou nomes de usuário.`,submit:`Enviar`,startLogging:`Iniciar log de depuração`,stepEnableLogging:`Log de depuração ativado`,stepReproduce:`Reproduza o problema agora`,stepStopLogging:`Parar & enviar relatório`,stopAndSubmit:`Parar & Enviar`,maxDuration:`Para automaticamente após {{minutes}} min`,stoppingLogs:`Coletando logs & enviando...`,submitting:`Enviando relatório de bug...`,submittingStepConnection:`Executando verificações de conectividade das impressoras`,submittingStepVirtualPrinters:`Executando verificações de configuração das impressoras virtuais`,submittingStepLogScan:`Analisando registros recentes em busca de problemas conhecidos`,submittingStepSubmit:`Enviando relatório para o GitHub`,submitSuccess:`Relatório de bug enviado com sucesso!`,submitFailed:`Falha ao enviar relatório de bug`,diagnosticChecking:`Verificando as conexões das impressoras...`,diagnosticHealthy:`Verificação de conexão aprovada — nenhum problema encontrado nas suas impressoras.`,diagnosticSummary:`{{problems}} de {{total}} impressoras têm problemas de conexão`,diagnosticIntro:`Uma ou mais impressoras têm um problema de conexão que pode estar causando seu problema. Expanda uma impressora abaixo para ver a solução — resolvê-la pode solucionar o problema sem um relatório de bug. Você ainda pode enviar um relatório abaixo.`,thankYou:`Obrigado!`,submitted:`Seu relatório de bug foi enviado.`,viewIssue:`Ver issue`,closeKeepsRecording:`Você pode fechar este painel enquanto reproduz o problema: a gravação continua e, ao reabrir, você volta para cá.`,resumeRecording:`Relatório de bug gravando — {{elapsed}}. Clique para concluir.`,resumeReport:`Retomar relatório`,unexpectedError:`Ocorreu um erro inesperado`},failureDetection:{title:`Detecção de Falhas por IA`,description:`Monitora impressões via API ML do Obico auto-hospedada e age automaticamente em falhas detectadas.`,mlUrl:`URL da API ML do Obico`,mlUrlHint:`URL base do seu contêiner Obico ml_api auto-hospedado (ex.: http://192.168.1.10:3333).`,mlToken:`Token da API ML (opcional)`,mlTokenPlaceholder:`Deixe vazio se o servidor for executado sem ML_API_TOKEN`,mlTokenHint:`Deve corresponder à variável de ambiente ML_API_TOKEN do seu contêiner Obico ml_api. Deixe vazio se o contêiner for executado sem token.`,test:`Testar`,testSuccess:`API ML acessível e operacional.`,testSuccessTokenUnknown:`API ML acessível e operacional. Não foi possível verificar o token.`,testFailed:`Não foi possível acessar a API ML.`,sensitivity:`Sensibilidade`,sensitivityLow:`Baixa (menos falsos positivos)`,sensitivityMedium:`Média (equilibrada)`,sensitivityHigh:`Alta (detecção precoce, mais falsos positivos)`,sensitivityHint:`Ajusta os limiares de confiança que disparam avisos e falhas.`,action:`Ação em falha detectada`,actionNotify:`Apenas notificar`,actionPause:`Pausar impressão`,actionPauseOff:`Pausar e cortar energia`,pollInterval:`Intervalo de verificação (segundos)`,pollIntervalHint:`Frequência de verificação de cada impressora durante a impressão. Mínimo 5s, máximo 120s.`,externalUrlMissing:`URL externa não definida.`,externalUrlHint:`A API ML busca a captura da câmera por URL. Defina a URL externa nas configurações gerais para que o contêiner da API ML possa alcançar o Bambuddy.`,perPrinterTitle:`Impressoras monitoradas`,perPrinterHint:`Escolha quais impressoras o serviço de detecção monitora.`,monitorAll:`Monitorar todas as impressoras conectadas`,statusTitle:`Status`,serviceRunning:`Serviço em execução`,thresholds:`Limiares baixo / alto`,activePrinters:`Impressões ativas`,noActivePrints:`Nenhuma impressão em andamento.`,historyTitle:`Detecções recentes`,noHistory:`Nenhuma detecção ainda.`},makerworld:{title:`MakerWorld`,description:`Cole uma URL de modelo do MakerWorld para importar e imprimir diretamente do Bambuddy — sem precisar abrir o app Bambu Handy.`,pasteUrlHeader:`Importar do MakerWorld`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… ou cole qualquer link do MakerWorld`,resolveButton:`Resolver`,signInRequiredTitle:`Login no Bambu Cloud necessário para baixar`,signInRequiredBody:`Você pode navegar pelos detalhes do modelo anonimamente, mas o MakerWorld exige uma conta Bambu Cloud para baixar arquivos 3MF.`,signInExpiredTitle:`Sessão do Bambu Cloud expirada`,signInExpiredBody:`Você continua conectado ao Bambuddy, mas a Bambu Lab deixou de aceitar o token armazenado, então os downloads vão falhar. Entre novamente no Bambu Cloud.`,openCloudSettings:`Abrir configurações do Cloud`,untitledModel:`Modelo sem título`,byCreator:`por {{name}}`,downloadsCount:`{{count}} downloads`,licensePrefix:`Licença`,alreadyImported:`Já na biblioteca`,openOnMakerworld:`Abrir no MakerWorld`,alreadyInLibrary:`Este modelo já está na sua biblioteca — encontre-o em Gerenciador de Arquivos → MakerWorld`,importSuccess:`{{filename}} importado — salvo em Gerenciador de Arquivos → MakerWorld`,platesHeader:`Placas ({{count}})`,plateDefaultName:`Placa {{n}}`,materialCount:`{{count}} filamentos`,amsRequired:`AMS necessário`,slicedFor:`Fatiado para {{printer}}`,alsoCompatible:`Também marcado como compatível: {{printers}}`,importToLibrary:`Salvar`,sliceIn:`Salvar e fatiar no {{slicer}}`,disclaimer:`A integração com o MakerWorld usa endpoints de API documentados pela comunidade. Bambuddy não é afiliado nem endossado pelo MakerWorld ou pela Bambu Lab.`,lastImportSuccess:`Importado para sua biblioteca`,lastImportAlreadyInLibrary:`Já na sua biblioteca`,viewInLibrary:`Ver no Gerenciador de Arquivos`,openInBambuStudio:`Abrir no Bambu Studio`,openInOrcaSlicer:`Abrir no OrcaSlicer`,importTo:`Importar para o Gerenciador de Arquivos`,recentImportsHeader:`Importações recentes`,phaseResolving:`Resolvendo`,phaseDownloading:`Baixando`,folderAuto:`MakerWorld (padrão)`,importAll:`Importar tudo`,importAllProgress:`Importando {{current}}/{{total}}`,openGallery:`Abrir galeria de imagens`,galleryPrev:`Imagem anterior`,galleryNext:`Próxima imagem`,deleteImport:`Remover da biblioteca`,importDeleting:`Removendo…`,importDeleted:`Removido da biblioteca`,confirmDelete:`Remover {{filename}} da biblioteca? O arquivo local será excluído, mas a placa pode ser reimportada do MakerWorld.`,errors:{resolveFailed:`Não foi possível resolver essa URL do MakerWorld.`,downloadFailed:`Falha no download. Tente novamente.`,deleteFailed:`Não foi possível remover o arquivo da biblioteca.`}},gcodeViewer:{filamentSlot:`Filamento {{n}}`,loading:`Lendo a trajetória…`,loadFailed:`Não foi possível carregar o G-code deste arquivo.`,showTravel:`Movimentos sem extrusão`,topLayer:`Camada superior`,bottomLayer:`Camada inferior`,noSource:`Nenhum arquivo foi indicado para visualização.`,view:{filament:`Filamento`,feature:`Elemento`,height:`Altura`,width:`Largura`},feature:{wall:`Paredes`,sparseInfill:`Preenchimento esparso`,solidInfill:`Preenchimento sólido`,bridge:`Ponte / saliência`,support:`Suporte`,skirt:`Saia / aba`,gapFill:`Preenchimento de lacunas`,ironing:`Alisamento`,primeTower:`Torre de purga`},back:`Voltar`,backToArchives:`Voltar para os arquivos de impressão`,backToFiles:`Voltar para o gerenciador de arquivos`,plates:`Placas`,plateN:`Placa {{n}}`},libraryTrash:{title:`Lixeira`,headerButton:`Lixeira`,headerTooltip:`Ver arquivos movidos para a lixeira`,backToFiles:`Voltar ao gerenciador de arquivos`,subtitleAdmin:`Arquivos excluídos ficam aqui por {{days}} dias e depois são removidos automaticamente. Esta visualização mostra a lixeira de todos os usuários.`,subtitleUser:`Arquivos excluídos ficam aqui por {{days}} dias e depois são removidos automaticamente.`,loading:`Carregando a lixeira…`,loadError:`Não foi possível carregar a lixeira.`,empty:`A lixeira está vazia.`,summary:`{{count}} arquivos · {{size}}`,emptyTrash:`Esvaziar lixeira`,restore:`Restaurar`,purgeNow:`Excluir agora`,autoPurgeIn:`Exclusão automática em {{when}}`,days:`dias`,retentionLabel:`Excluir automaticamente após`,selectAll:`Selecionar todos`,selectOne:`Selecionar {{filename}}`,selectionCount:`{{count}} selecionado(s)`,bulkRestore:`Restaurar selecionados`,bulkPurge:`Excluir selecionados`,col:{filename:`Arquivo`,folder:`Pasta`,size:`Tamanho`,deleted:`Movido para a lixeira`,autoPurge:`Exclusão auto.`,owner:`Proprietário`,actions:`Ações`},confirm:{purgeTitle:`Excluir permanentemente?`,purgeBody:`{{filename}} será excluído do disco e não poderá ser restaurado.`,emptyTitle:`Esvaziar a lixeira?`,emptyBody:`Todos os {{count}} arquivos serão excluídos do disco. Esta ação não pode ser desfeita.`,bulkPurgeTitle:`Excluir permanentemente os arquivos selecionados?`,bulkPurgeBody:`Os {{count}} arquivos selecionados serão excluídos do disco e não poderão ser restaurados.`,cta:`Excluir permanentemente`},toast:{restored:`Arquivo restaurado.`,restoreFailed:`Não foi possível restaurar o arquivo.`,purged:`Arquivo excluído permanentemente.`,purgeFailed:`Não foi possível excluir o arquivo.`,emptied:`{{count}} arquivo(s) excluído(s) da lixeira.`,emptyFailed:`Não foi possível esvaziar a lixeira.`,retentionSaved:`Exclusão automática definida para {{days}} dias.`,retentionFailed:`Não foi possível salvar a configuração de retenção.`,bulkRestored:`{{count}} arquivo(s) restaurado(s).`,bulkPurged:`{{count}} arquivo(s) excluído(s).`}},libraryPurge:{title:`Limpar arquivos antigos`,headerButton:`Limpar antigos`,headerTooltip:`Mover arquivos antigos em massa para a lixeira`,description:`Arquivos mais antigos que o limite serão movidos para a lixeira. Pastas externas são ignoradas. Você pode restaurar da lixeira antes da exclusão automática.`,ageLabel:`Mover arquivos mais antigos que`,days:`dias`,includeNeverPrinted:`Incluir arquivos que nunca foram impressos`,effectsTitle:`O que acontece quando você clica em Limpar`,effect1:`Os arquivos correspondentes são movidos para a Lixeira — ainda não são excluídos do disco.`,effect2:`Você pode restaurá-los da Lixeira a qualquer momento até o fim do período de retenção.`,effect3:`Após o período de retenção, o coletor da lixeira os remove permanentemente.`,effect4:`Arquivos em pastas externas (vinculadas) são ignorados — Bambuddy nunca exclui bytes que não possui.`,previewLoading:`Verificando quantos arquivos correspondem…`,previewFailed:`Não foi possível pré-visualizar a limpeza.`,previewSummary:`{{count}} arquivos · {{size}} seriam movidos para a lixeira`,andMore:`…e mais {{count}}`,warning:`Os arquivos são excluídos de forma suave — você pode restaurá-los da lixeira até o fim do período de retenção.`,confirmCta:`Mover {{count}} para a lixeira`,purging:`Movendo para a lixeira…`,toast:{success:`{{count}} arquivo(s) movido(s) para a lixeira.`,failed:`Não foi possível limpar os arquivos.`}},libraryAutoPurge:{enableLabel:`Limpar arquivos antigos automaticamente`,enableDescription:`Executa a limpeza administrativa uma vez por dia. Os arquivos vão primeiro para a lixeira — não são excluídos imediatamente.`,ageLabel:`Limpar automaticamente arquivos mais antigos que`,ageDescription:`Mínimo 7 dias, máximo 10 anos. Usa a mesma regra de idade do botão Limpar manual.`,days:`dias`,includeNeverPrinted:`Incluir arquivos que nunca foram impressos`,saveFailed:`Não foi possível salvar as configurações de limpeza automática.`},archivePurge:{headerButton:`Limpar antigos`,headerTooltip:`Excluir arquivos antigos em massa`,title:`Limpar arquivos antigos`,description:`Limpa o histórico de impressão antigo. Cada arquivo envelhece pela última conclusão de impressão — reimprimir reinicia a idade, então trabalho ativo nunca é removido.`,ageLabel:`Excluir arquivos não impressos nos últimos`,days:`dias`,effectsTitle:`O que acontece quando você clica em Limpar`,effect1:`Cada arquivo correspondente é ocultado das listagens e seus arquivos são removidos do disco (3MF, miniatura, timelapse, 3MF de origem, F3D, fotos).`,effect2:`A linha do arquivo permanece no banco de dados para que o Quick Stats mantenha a contribuição de filamento, tempo, custo e energia — mesmo comportamento padrão da exclusão individual.`,effect3:`Marque "Remover também das estatísticas" abaixo para descartar também a contribuição do Quick Stats (equivalente à opção da exclusão individual). Esse caminho é irreversível.`,effect4:`Reimprimir um arquivo reinicia seu cronômetro de idade, então arquivos ativos estão protegidos.`,purgeStatsLabel:`Remover também das estatísticas`,purgeStatsHint:`Remove os arquivos correspondentes do Quick Stats (filamento, tempo, custo, energia). Sem essa opção, o Quick Stats mantém cada contribuição e apenas os arquivos saem do disco.`,previewLoading:`Verificando quantos arquivos correspondem…`,previewFailed:`Não foi possível visualizar a limpeza.`,previewSummary:`{{count}} arquivos · {{size}} seriam removidos`,andMore:`…e mais {{count}}`,warning:`Os arquivos são removidos do disco e não podem ser restaurados. Baixe ou favorite o que quiser manter antes de continuar.`,confirmCta:`Remover {{count}} arquivo(s)`,purging:`Removendo…`,toast:{success:`{{count}} arquivo(s) removido(s).`,failed:`Não foi possível limpar os arquivos.`}},archiveAutoPurge:{enableLabel:`Limpar arquivos antigos auto.`,enableDescription:`Uma vez por dia oculta das listagens os arquivos não impressos dentro do limite e remove seus arquivos do disco. Reimprimir reinicia o cronômetro.`,ageLabel:`Exclusão auto. de arquivos não impressos nos últimos`,ageDescription:`Mínimo 7 dias, máximo 10 anos. Baseado na última conclusão de impressão — reimprimir reinicia a idade. Remove 3MF, miniatura, timelapse, 3MF de origem, F3D e fotos.`,days:`dias`,purgeStatsLabel:`Remover também das estatísticas`,purgeStatsDescription:`Quando ativada, a varredura diária também descarta a contribuição de cada arquivo limpo do Quick Stats (filamento, tempo, custo, energia). Desativada por padrão — o Quick Stats mantém a contribuição e apenas os arquivos saem do disco.`,runNow:`Limpar arquivos agora`,saveFailed:`Não foi possível salvar as configurações de limpeza automática.`},cameraTokens:{scope:{camera_stream:`Transmissão da câmera`,camwall:`Mural de câmeras`,overlay:`Sobreposição de streaming`},title:`Tokens da API de câmera`,navTitle:`Tokens da API de câmera`,description:`Tokens de longa duração para incorporar a transmissão da câmera no Home Assistant, no Frigate, em telas em modo quiosque ou em qualquer outra ferramenta que precise de um endereço estável. O escopo é escolhido na criação; um token pode ser revogado a qualquer momento.`,loading:`Carregando…`,confirmRevoke:{title:`Revogar este token?`,body:`Qualquer dispositivo usando "{{name}}" perderá acesso imediatamente. Isso não pode ser desfeito.`,cancel:`Cancelar`,confirm:`Revogar`},create:{scopeLabel:`Escopo`,hintCameraStream:`Um token de transmissão da câmera só consegue buscar transmissões e instantâneos. Use-o no Home Assistant, no Frigate ou em qualquer coisa que incorpore uma única câmera.`,hintCamWall:`Um token do mural de câmeras abre /camwall em uma tela sem login. Ele vê o nome e o estado de cada impressora e as transmissões das câmeras. Não vê nomes de arquivo, endereços nem códigos de acesso.`,hintOverlay:`Um token de sobreposição de streaming abre /overlay/{printerId} em uma tela sem login — para o OBS ou qualquer transmissão ao vivo. Ele vê a transmissão da câmera de uma impressora e seu status de impressão ao vivo, incluindo o nome de arquivo mostrado na tela. Não vê endereços nem códigos de acesso.`,title:`Criar novo token`,nameLabel:`Nome do token`,namePlaceholder:`ex. Home Assistant`,daysLabel:`Dias até expirar`,submit:`Criar`,hint:`Tempo de vida máximo 365 dias. O valor do token é exibido apenas na criação — copie agora.`},created:{camWallUrlTitle:`Endereço do mural de câmeras para esta tela`,camWallUrlHint:`Abra este endereço na tela. Qualquer pessoa que consiga lê-lo pode assistir ao painel, então trate-o como uma chave: revogue o token para cortar o acesso da tela.`,overlayUrlTitle:`Endereço de sobreposição para OBS`,overlayUrlHint:`Adicione isto como Fonte de navegador no OBS. Altere o número em /overlay/1 para o número da sua impressora (do endereço dela na página Impressoras). Qualquer pessoa que consiga ler o endereço pode assistir à transmissão, então trate-o como uma chave: revogue o token para cortar o acesso.`,title:`Token criado – copie agora`,warning:`Esta é a única vez que este token será visível. Após fechar este diálogo, você nunca poderá vê-lo novamente.`,copy:`Copiar`,dismiss:`Eu salvei`},list:{scope:`Escopo`,myTitle:`Meus tokens`,allTitle:`Todos os usuários (visão admin)`,empty:`Nenhum token ainda.`,name:`Nome`,owner:`Proprietário`,prefix:`Prefixo`,created:`Criado`,expires:`Expira`,lastUsed:`Último uso`,revoke:`Revogar`,expired:`Expirado`},toast:{created:`Token criado`,createFailed:`Falha ao criar token`,revoked:`Token revogado`,revokeFailed:`Falha ao revogar token`,loadFailed:`Falha ao carregar tokens`,copied:`Copiado para a área de transferência`,copyFailed:`Falha ao copiar – selecione e copie manualmente`}},forecast:{title:`Previsão de Estoque`,noSpools:`Nenhum carretel ativo encontrado. Adicione carretéis ao seu inventário para ver os dados de previsão.`,noUsageData:`Nenhum dado de uso disponível — não é possível projetar a linha do tempo do estoque.`,sku:`SKU`,material:`Material`,stock:`Estoque`,dailyRate:`Taxa`,daysLeft:`Dias Restantes`,emptyBy:`Esgota em`,reorderBy:`Reabastecer até`,actions:`Ações`,trend:`Tendência`,estimated:`Est.`,noData:`Sem dados`,timeframe:`Período`,chartTitle:`Estoque projetado — Top 5 materiais`,dashedLinesROP:`Linhas tracejadas = pontos de reposição`,stockLevel:`Nível de Estoque`,reorderPoint:`Ponto de Reposição`,safetyMargin:`Margem de Segurança`,trendLegend:`Tendência (baseada em histórico, nível de serviço 95%)`,estimatedLegend:`Estimado (delta de peso)`,noDataLegend:`Sem dados`,ropLabel:`PR`,ssLabel:`SE`,safetyStockLegend:`Estoque de segurança`,stockArrivalLegend:`Chegada do estoque`,stockoutLegend:`Ruptura de estoque`,alertCount_one:`{{count}} alerta`,alertCount_other:`{{count}} alertas`,order:`Pedir`,globalLeadTime:`Lead time global`,globalLeadTimeHint:`Lead time global mínimo — usado no cálculo do ponto de reposição para todos os SKUs`,save:`Salvar`,cancel:`Cancelar`,settingsSaved:`Configurações salvas`,failedSaveSettings:`Falha ao salvar configurações`,globalLeadTimeSaved:`Prazo global salvo`,skuLeadTimeOverride:`Override de Lead Time do SKU`,skuLeadTimeHint:`0 = usar lead time global. Defina >0 para substituir para este SKU.`,safetyMarginLabel:`Margem de Segurança`,effectiveLeadTime:`Lead Time Efetivo`,effectiveLeadTimeHint:`máx(global {{global}}d, SKU {{sku}}d)`,reorderPointHint:`d̄ × LT + safety margin — peça quando o estoque atingir este nível`,safetyMarginHint:`Estoque de segurança estatístico (z=1,65 × σ × √LT) + buffer definido pelo usuário`,safetyMarginHintDays:`Buffer adicionado ao estoque de segurança estatístico.{{approx}}`,safetyMarginHintDaysApprox:` ≈ {{g}}g na taxa atual.`,safetyMarginHintG:`Buffer de peso fixo adicionado ao estoque de segurança estatístico.{{approx}}`,safetyMarginHintGApprox:` ≈ {{days}}d na taxa atual.`,individualSpools:`Carretéis individuais`,labelWeight:`Etiqueta`,spoolCount_one:`{{count}} carretel`,spoolCount_other:`{{count}} carretéis`,stockBreakRisk:`Risco de ruptura de estoque`,stockBreakBefore:`Ruptura de estoque antes do reabastecimento`,stockBreakDetail:`{{days}}d restantes, lead time {{lt}}d.`,reorderNow:`Reabastecer agora`,reorderTriggerPassed:`A data de acionamento {{date}} já passou.`,shoppingList:`Lista de Compras`,shoppingListItems_one:`({{count}} item)`,shoppingListItems_other:`({{count}} itens)`,shoppingListEmpty:`A lista de compras está vazia. Clique no ícone do carrinho em qualquer linha para adicionar itens.`,addToCart:`Adicionar à lista de compras`,alertsSnoozed:`Silenciar alertas para este SKU`,alertsEnabled:`Ativar alertas para este SKU`,addedToCart:`Adicionado à lista de compras`,failedAddItem:`Falha ao adicionar item`,listView:`Lista`,logisticsView:`Logística`,qty:`Qtd`,weight:`Peso`,leadTime:`Prazo de entrega`,expectedRestock:`Reabastecimento Previsto`,status:`Status`,note:`Nota`,pending:`Pendente`,purchased:`Comprado`,received:`Recebido`,markPurchased:`Marcar como comprado`,markReceived:`Marcar como recebido — adiciona carretéis ao estoque`,resetToPending:`Redefinir para pendente`,remove:`Remover`,clearAll:`Limpar tudo`,downloadCsv:`CSV`,addToCartTitle:`Adicionar à lista de compras`,byQuantity:`Por quantidade`,byDuration:`Por duração`,numberOfSpools:`Número de carretéis`,lastHowManyDays:`Por quantos dias deve durar?`,noUsageQty:`Sem dados de uso — quantidade definida como 1.`,noteOptional:`Observação (opcional)`,notePlaceholder:`ex. para o projeto X, urgente…`,addNSpools_one:`Adicionar {{count}} carretel`,addNSpools_other:`Adicionar {{count}} carretéis`,onArrival:`Na Chegada`,stockBreakIn:`Ruptura de estoque em {{days}}d.`,stockRunsOutBefore:`O estoque se esgota antes do lead time de {{lt}}d decorrer.`,atRate:`A {{rate}}g/dia você precisa de`,moreSpools_one:`{{count}} carretel a mais`,moreSpools_other:`{{count}} carretéis a mais`,bridgeGap:`para cobrir a lacuna.`,noReadAccess:`Você não tem permissão para visualizar previsões de inventário.`,noWriteAccess:`Você não tem permissão para modificar as configurações de previsão.`}}},"zh-CN":{translation:{nav:{printers:`打印机`,archives:`归档`,queue:`打印队列`,stats:`统计`,profiles:`配置文件`,maintenance:`维护`,projects:`项目`,finance:`财务`,inventory:`耗材`,files:`文件管理器`,makerworld:`MakerWorld`,notifications:`通知`,settings:`设置`,system:`系统`,collapseSidebar:`收起侧边栏`,expandSidebar:`展开侧边栏`,update:`更新`,updateAvailable:`有可用更新：v{{version}}`,updateAvailableBanner:`版本 {{version}} 已发布！`,viewUpdate:`查看更新`,viewOnGithub:`在 GitHub 上查看`,keyboardShortcuts:`键盘快捷键 (?)`,switchToLight:`切换到浅色模式`,switchToDark:`切换到深色模式`,switchToSystem:`切换到系统模式`,smartSwitches:`智能开关`,logout:`退出登录`,installApp:`安装应用`,installAppSuccess:`Bambuddy 已安装`},common:{plusNMore:`另 {{count}} 个`,save:`保存`,saving:`保存中...`,cancel:`取消`,delete:`删除`,edit:`编辑`,add:`添加`,close:`关闭`,confirm:`确认`,loading:`加载中...`,error:`错误`,errorLoading:`加载错误`,retry:`重试`,success:`成功`,warning:`警告`,enabled:`已启用`,disabled:`已禁用`,yes:`是`,no:`否`,on:`开`,off:`关`,all:`全部`,none:`无`,search:`搜索`,filter:`筛选`,sort:`排序`,refresh:`刷新`,download:`下载`,upload:`上传`,uploading:`上传中...`,uploadFailed:`上传失败`,actions:`操作`,status:`状态`,name:`名称`,user:`用户`,description:`描述`,date:`日期`,time:`时间`,hours:`小时`,minutes:`分钟`,seconds:`秒`,days:`天`,enable:`启用`,disable:`禁用`,permissions:`权限`,noPrinters:`未配置打印机`,noData:`暂无数据`,linkNotFound:`未找到链接`,required:`必填`,optional:`可选`,dismiss:`关闭`,apply:`应用`,reset:`重置`,export:`导出`,import:`导入`,clear:`清除`,selectAll:`全选`,deselectAll:`取消全选`,noChange:`— 不更改 —`,unchanged:`未更改`,unassigned:`未分配`,unknown:`未知`,unknownError:`未知错误`,today:`今天`,tomorrow:`明天`,asap:`尽快`,overdue:`已逾期`,now:`现在`,collapse:`收起`,expand:`展开`,previous:`上一页`,next:`下一页`,viewArchive:`查看归档`,viewInFileManager:`在文件管理器中查看`,addedBy:`由 {{username}} 添加`,prints:`次打印`,more:`还有 {{count}} 个`,ascending:`升序`,descending:`降序`,back:`返回`,copy:`复制`,copied:`已复制!`,printer:`打印机`,remove:`移除`,type:`类型`,print:`打印`,rename:`重命名`,move:`移动`,create:`创建`,duplicate:`复制`,left:`左`,right:`右`,run:`运行`,running:`运行中...`},finance:{allTypes:`所有类型`,allCostCenters:`所有成本中心`,title:`财务`,subtitle:`钱包、个人交易和成本中心`,noAccess:`您没有权限查看财务数据。`,personalView:`个人视图`,adminView:`管理员视图`,createCostCenter:`创建成本中心`,adjustWallet:`调整钱包`,addManualPrint:`添加手动打印`,manageMembers:`管理成本中心成员`,currentBalance:`个人余额`,transactions:`交易`,personalTransactions:`个人交易`,costCenters:`成本中心`,availableForPrinting:`可用于打印分配`,costCenterName:`名称`,budgetType:`预算类型`,monthlyBudget:`月度预算`,totalBudget:`总预算`,noBudget:`无预算`,create:`创建`,selectUser:`选择用户`,transactionType:`类型`,amount:`金额`,noCostCenter:`无成本中心`,descriptionOptional:`描述（可选）`,applyAdjustment:`应用调整`,memberCanPrint:`成员可以打印`,addMember:`添加成员`,canPrint:`可以打印`,noMembers:`未分配任何成员。`,editCostCenter:`编辑成本中心`,myCostCenters:`我的成本中心`,costCentersHint:`审查预算限制并将成本控制在可控范围内`,noCostCenters:`未找到成本中心。`,owner:`所有者`,balance:`账户余额`,unlimited:`无限制`,budgetPolicyHint:`账户余额用于记录成本。打印仅受所选成本中心预算限制；未设置预算时不受限制。`,budget:`预算`,shared:`共享`,cannotEditPrivateCostCenter:`私人成本中心无法在此处编辑`,recentTransactions:`最近的交易`,transactionsHint:`按类型和成本中心筛选，然后浏览页面`,first:`首页`,prev:`上一页`,next:`下一页`,last:`末页`,pageNumberOf:`第 {{page}} 页，共 {{total}} 页`,noTransactions:`没有可用的交易。`,noTransactionsForFilter:`没有交易与选定的筛选器相匹配。`,costCenter:`成本中心`,balanceAfter:`调整后余额`,userWithId:`用户 #{{id}}`,partial:`部分`,editTransaction:`编辑交易`,selectCostCenter:`选择成本中心...`,costCenterRequired:`请选择一个成本中心`,amountExample:`例如 4.00`,manualAdjustmentExample:`例如 手动调整`,userRequired:`请选择一个用户`,amountInvalid:`金额必须是有效的数字`,createdCostCenter:`成本中心已创建`,createCostCenterFailed:`创建成本中心失败`,transactionDeleted:`交易已删除`,deleteTransactionFailed:`删除交易失败`,transactionEdited:`交易已更新，账本已重新计算`,editTransactionFailed:`编辑交易失败`,manualPrintCreated:`手动打印费用已添加，账本已重新计算`,manualPrintFailed:`创建手动打印失败`,memberSaved:`成员已保存`,memberSaveFailed:`保存成员失败`,memberRemoved:`成员已移除`,memberRemoveFailed:`移除成员失败`,costCenterNameRequired:`成本中心名称为必填项`,costCenterUpdated:`成本中心已更新`,costCenterUpdateFailed:`更新成本中心失败`,confirmDeleteCostCenter:`删除成本中心 "{{name}}" ?`,costCenterDeleted:`成本中心已删除`,costCenterDeleteFailed:`删除成本中心失败`,deleteTransactionConfirm:`删除此交易？余额将自动重新计算。`,deposit:`存款`,withdraw:`取款`,printCharge:`打印费用`,deleteTransaction:`删除交易`},printers:{addPreflight:{checking:`正在检查连接...`,warning:`部分连接检查未通过。此打印机可能显示为离线。请查看下方的检查项，尽量修复，或仍然保存。`,back:`返回`,saveAnyway:`仍然保存`},title:`打印机`,addPrinter:`添加打印机`,editPrinter:`编辑打印机`,deletePrinter:`删除打印机`,printerName:`打印机名称`,serialNumber:`序列号`,ipAddress:`IP 地址 / 主机名`,accessCode:`访问码`,model:`型号`,nozzleCount:`喷嘴数量`,autoArchive:`自动归档`,status:{available:`可用`,idle:`空闲`,printing:`打印中`,paused:`已暂停`,offline:`离线`,problem:`故障`,error:`错误`,finished:`已完成`,unknown:`未知`},temperatures:{nozzle:`喷嘴`,bed:`热床`,chamber:`腔室`},heaterHistory:{title:`加热历史`,openLabel:`查看加热历史`,nozzle:`喷嘴`,nozzle2:`喷嘴 2`,bed:`热床`,chamber:`腔室`,error:`加载历史失败`,empty:`尚未记录数据`},progress:`{{percent}}% 完成`,timeRemaining:`剩余 {{time}}`,deleteConfirm:`确定要删除"{{name}}"吗？`,maintenanceOk:`维护正常`,maintenanceWarning:`{{count}} 个警告`,maintenanceWarning_plural:`{{count}} 个警告`,maintenanceDue:`{{count}} 个到期`,maintenanceDue_plural:`{{count}} 个到期`,sort:{name:`名称`,status:`状态`,model:`型号`,location:`位置`,eta:`剩余时间`,ascending:`升序排列`,descending:`降序排列`},cardSize:{small:`小卡片`,medium:`中卡片`,large:`大卡片`,extraLarge:`超大卡片`},pageView:{openCamWallPage:`在独立页面中打开摄像头墙`,cards:`卡片`,camWall:`摄像头墙`},camWall:{page:{tokenRejected:`此摄像头墙链接已失效。令牌可能已过期或被撤销。`,loadFailed:`无法加载打印机。`},noPrinters:`没有可显示的打印机`,noSignal:`无信号`,live:`直播`,snap:`快照`,off:`关闭`,summary:`直播 {{live}} 个，快照 {{snap}} 个，共 {{total}} 个`,layer:`第 {{cur}}/{{total}} 层`,timeLeft:`剩余 {{time}}`,statusMode:{off:`关闭`,compact:`简洁`,full:`完整`},settings:{title:`摄像头墙设置`,maxLive:`最大直播数`,maxLiveHint:`同时直播的画面数量。其他画面以快照刷新。`,snapshotInterval:`快照刷新间隔（秒）`,snapshotIntervalHint:`非直播画面获取新快照的频率。`,statusOverlay:`状态叠加`,statusOverlayHint:`简洁：仅显示状态标签。完整：加上进度、层数、剩余时间。`}},hideOffline:`隐藏离线`,nextAvailable:`下一个可用`,powerOn:`开机`,offlinePrintersWithPlugs:`带智能插座的离线打印机`,noPrintersConfigured:`尚未配置打印机`,search:`搜索打印机...`,noSearchResults:`没有打印机符合您的搜索或筛选条件`,filter:{allStatuses:`所有状态`,allLocations:`所有位置`},toolbar:{filters:`筛选`,view:`视图`,actions:`操作`},readyToPrint:`准备打印`,external:`外部`,extL:`外置左`,extR:`外置右`,deleteArchives:`删除打印归档`,noLabel:`无标签`,printPreview:`打印预览`,width:`宽度`,height:`高度`,noObjectsFound:`未找到对象`,objectsLoadedOnPrintStart:`对象在打印开始时加载`,willBeSkipped:`将被跳过`,name:`名称`,serialCannotBeChanged:`序列号无法更改`,locationHelp:`用于分组打印机和筛选队列任务`,wifiSignal:{veryWeak:`非常弱`,weak:`弱`,fair:`一般`,good:`良好`,excellent:`优秀`},maintenanceUpToDate:`所有维护均已完成 - 点击查看`,maintenance:{title:`维护中`,subtitle:`此打印机已暂停 — 未连接、不参与队列调度、不发送通知。`,pillLabel:`维护`,exitButton:`退出维护`,menuEnter:`进入维护模式`,menuExit:`退出维护模式`,toastEntered:`{{name}} 已进入维护模式`,toastExited:`{{name}} 已恢复在线`,confirmMidPrintTitle:`在打印过程中进入维护模式？`,confirmMidPrintMessage:`{{name}} 当前正在打印。进入维护模式将断开 MQTT 连接，并停止此任务的进度跟踪和完成通知。是否继续？`,editFieldLabel:`维护模式`,editFieldHelp:`启用后，此打印机将从 MQTT、队列调度和通知中暂停 — 适用于维修、并行 Bambuddy 安装或临时停用。`},chamberLightOn:`打开腔室灯`,chamberLightOff:`关闭腔室灯`,files:`文件`,browseFiles:`浏览打印机文件`,autoOffAfterPrint:`打印后自动关机`,autoOffExecuted:`已执行自动关机 - 开启打印机以重置`,hmsErrors:`HMS 错误`,viewHmsErrors:`查看 {{count}} 个 HMS 错误`,resume:`继续`,pause:`暂停`,stop:`停止`,camera:`摄像头`,skipObject:`跳过对象`,reconnect:`重新连接`,forceRefresh:`强制刷新`,forceRefreshSuccess:`已请求刷新`,mqttDebug:`MQTT 调试`,printerInformation:`打印机信息`,copyToClipboard:`复制`,copied:`已复制！`,state:`状态`,wifiSignalLabel:`WiFi 信号`,developerMode:`开发者模式`,enabled:`已启用`,disabled:`已禁用`,addedOn:`添加日期`,sdCard:`SD 卡`,inserted:`已插入`,notInserted:`未插入`,totalPrintHours:`打印时长`,activeNozzle:`当前：{{nozzle}} 喷嘴`,amsSwitchInletTooltip:`耗材变轨器 IN-{{inlet}}（{{side}}）— 可向两个喷嘴供料`,nozzleRack:`喷嘴架`,nozzleDocked:`已停靠`,nozzleMounted:`已安装`,nozzleActive:`使用中`,nozzleIdle:`空闲`,nozzleDiameter:`直径`,nozzleType:`类型`,nozzleStatus:`状态`,nozzleFilament:`耗材`,nozzleWear:`磨损`,nozzleMaxTemp:`最高温度`,nozzleSerial:`序列号`,nozzleHardenedSteel:`硬化钢`,nozzleStainlessSteel:`不锈钢`,nozzleTungstenCarbide:`碳化钨`,nozzleFlow:`流量`,nozzleHighFlow:`高流量`,nozzleStandardFlow:`标准`,firmwareUpdate:`固件更新`,firmwareInstructions:`在打印机触摸屏上，前往`,firmwareNav:`导航到`,settings:`设置`,firmware:`固件`,discoverPrinters:`发现打印机`,searching:`搜索中...`,manualEntry:`手动输入`,addFromCloud:`从云端添加`,toast:{printerDeleted:`打印机已删除`,missingSpoolAssignment:`已在{{printer}}上开始打印。以下料槽未分配耗材: {{slots}}`,killSwitchTriggered:`计费终止开关已停止 {{printer}} 上的未授权打印：{{filename}}`,billingChargeFailed:`{{printer}} 上的 {{filename}} 计费失败。预算预留已保留；请检查服务器日志。`,assignmentVerified:`耗材已加载到料槽{{slot}}（{{printer}}）`,assignmentVerifiedNoKprofile:`{{printer}}的料槽{{slot}}已加载，但流量校准配置（K配置）未应用`,assignmentNotConfirmed:`无法确认{{printer}}上料槽{{slot}}的分配，请检查AMS料槽`,printerAdded:`打印机已添加`,printerUpdated:`打印机已更新`,failedToDelete:`删除打印机失败`,failedToAdd:`添加打印机失败`,connectionFailedNotAdded:`无法连接到打印机。请检查 IP 地址、序列号和访问码，并确认已启用仅局域网（LAN-only）模式。该打印机未被添加。`,failedToUpdate:`更新打印机失败`,commandSent:`命令已发送`,failedToSendCommand:`发送命令失败`,turnedOn:`{{name}} 已开启`,failedToPowerOn:`开启 {{name}} 失败`,scriptTriggered:`脚本已触发`,printStopped:`打印已停止`,printPaused:`打印已暂停`,printResumed:`打印已继续`,referenceDeleted:`参考已删除`,detectionAreaSaved:`检测区域已保存`,failedToRunScript:`运行脚本失败`,failedToStopPrint:`停止打印失败`,failedToPausePrint:`暂停打印失败`,failedToResumePrint:`继续打印失败`,failedToControlChamberLight:`控制腔室灯失败`,failedToSetSpeed:`设置打印速度失败`,failedToUpdateSetting:`更新设置失败`,failedToSkipObjects:`跳过对象失败`,failedToRereadRfid:`重新读取 RFID 失败`,failedToCheckPlate:`检查打印板失败`,failedToUpdateLabel:`更新标签失败`,failedToDeleteReference:`删除参考失败`,failedToSaveDetectionArea:`保存检测区域失败`,plateCheckEnabled:`打印板检查已启用`,plateCheckDisabled:`打印板检查已禁用`,calibrationSaved:`校准已保存！`,calibrationFailed:`校准失败`,rfidRereadInitiated:`已发起 RFID 重新读取`,loadInitiated:`加载耗材中…`,unloadInitiated:`卸载耗材中…`,failedToLoad:`加载耗材失败`,failedToUnload:`卸载耗材失败`},connection:{connected:`已连接`,offline:`离线`},plateStatus:{markCleared:`将打印板标记为已清理`,cleared:`打印板已清理`,notCleared:`打印板未清理`,inUse:`打印板使用中`},queue:{inQueue:`队列中有 {{count}} 个打印任务`,inQueue_plural:`队列中有 {{count}} 个打印任务`},controls:`控制`,rfid:{reread:`重新读取 RFID`},ams:{load:`加载`,unload:`卸载`,feedTitle:`将 {{slot}} 装载到哪个喷嘴？`,feedPrompt:`Filament Track Switch 可以把该槽位送往任一热端。请选择要送入的一侧。`,feedLeft:`左喷嘴`,feedRight:`右喷嘴`,feedAlreadyLoaded:`已装载`,switchNotReady:`Filament Track Switch 尚未设置。请在打印机上为每个 AMS 分配入口后重试。`},bedJog:{limitWarning:`手动移动时不会强制执行行程限位——Bambu 固件存在缺陷，远程指令会忽略软件限位。请小心移动以避免碰撞。`,title:`点动控制`,bed:`热床`,step:`步长 (mm)`,up:`热床上移`,down:`热床下移`,toolheadUp:`喷头上移`,toolheadDown:`喷头下移`,disabledWhilePrinting:`打印中已禁用`,notHomedTitle:`打印机未归零`,notHomedMessage:`打印机自上次打印以来尚未归零。请先执行自动归零以确保安全定位（先停放喷头，然后归零 X、Y 和 Z），或者直接移动 — 软限位将被绕过。`,homeZ:`自动归零`,moveAnyway:`强制移动`,homingStarted:`打印机自动归零中…`},permission:{noAdd:`您没有添加打印机的权限`,noEdit:`您没有编辑打印机的权限`,noDelete:`您没有删除打印机的权限`,noControl:`您没有控制打印机的权限`,noFiles:`您没有访问打印机文件的权限`,noAmsRfid:`您没有重新读取 AMS RFID 的权限`,noSmartPlugControl:`您没有控制智能插座的权限`,noCamera:`您没有查看摄像头的权限`},modal:{addTitle:`添加打印机`,editTitle:`编辑打印机`,myPrinter:`我的打印机`,selectModel:`选择型号...`,locationGroup:`位置 / 分组（可选）`,locationPlaceholder:`例如：工作室、办公室、地下室`,autoArchiveLabel:`自动归档已完成的打印`,fromPrinterSettings:`来自打印机设置`,modelOptional:`型号（可选）`,saveChanges:`保存更改`},skipObjects:{tooltip:`跳过对象`,onlyWhilePrinting:`跳过对象（仅在打印时）`,requiresMultiple:`跳过对象（需要2个以上对象）`,title:`跳过对象`,matchIdsInfo:`将 ID 与打印机显示屏上的 ID 进行对照`,printerShowsIds:`打印机屏幕上显示构建板上对象的 ID`,skipSelected:`跳过所选`,skipping:`跳过中...`,noObjectsSelected:`未选择对象`,selectObjectsToSkip:`选择要从当前打印中跳过的对象`,skipped:`已跳过`,objectsSkipped:`对象已跳过`,activeCount:`{{count}} 个活跃`,waitForLayer:`等待第2层以上才能跳过对象（当前第 {{layer}} 层）`,skip:`跳过`,confirmTitle:`跳过对象？`,confirmMessage:`确定要跳过"{{name}}"吗？此操作无法撤销。`,confirmAllMessage:`已选择所有剩余对象。这将停止打印任务。是否继续？`,confirmMultipleMessage:`跳过选中的 {{count}} 个对象？此操作无法撤销。`},confirm:{deleteTitle:`删除打印机`,deleteMessage:`确定要删除"{{name}}"吗？这将移除所有连接设置。`,deleteArchivesNote:`此打印机的所有打印历史将被永久删除。`,keepArchivesNote:`打印历史将保留，但不再与此打印机关联。`,stopTitle:`停止打印`,stopMessage:`确定要停止"{{name}}"上的当前打印吗？这将取消打印任务。`,stopButton:`停止打印`,pauseTitle:`暂停打印`,pauseMessage:`确定要暂停"{{name}}"上的当前打印吗？`,pauseButton:`暂停打印`,resumeTitle:`继续打印`,resumeMessage:`确定要继续"{{name}}"上的打印吗？`,resumeButton:`继续打印`,powerOnTitle:`开启打印机`,powerOnMessage:`确定要打开"{{name}}"的电源吗？`,powerOnButton:`开机`,powerOffTitle:`关闭打印机`,powerOffMessage:`确定要关闭"{{name}}"的电源吗？`,powerOffWarning:`警告："{{name}}"正在打印中！确定要关闭电源吗？这将中断打印并可能损坏打印机。`,powerOffButton:`关机`,haToggleTitle:`切换"{{name}}"`,haToggleMessage:`切换 Home Assistant 实体 {{entity}}？如果当前为开启状态，可能会关闭电源。`,haToggleWarning:`警告："{{name}}"正在打印中！切换 {{entity}} 可能会切断电源并中断打印。是否继续？`,haToggleButton:`切换`},bulk:{select:`选择`,selectAll:`全选`,selectByLocation:`按位置选择`,selected:`已选择{{count}}台`,actions:{stop:`停止`,pause:`暂停`,resume:`继续`,clearPlate:`清除打印床`,clearHMS:`清除通知`},confirm:{stopTitle:`停止{{count}}个打印任务`,stopMessage:`这将取消{{count}}台打印机上的活动打印任务。此操作无法撤销。`,stopButton:`全部停止`,pauseTitle:`暂停{{count}}个打印任务`,pauseMessage:`这将暂停{{count}}台打印机上的活动打印任务。`,pauseButton:`全部暂停`,clearPlateTitle:`清除{{count}}个打印床`,clearPlateMessage:`这将清除{{count}}台打印机的打印床，可能会触发队列中的任务。`,clearPlateButton:`全部清除`},success:`{{action}}已在{{count}}台打印机上完成`,partial:`{{succeeded}}成功，{{failed}}失败`,noneApplicable:`没有选中的打印机处于适合此操作的状态`,selectByState:`按状态选择`},discovery:{title:`发现打印机`,searching:`搜索中...`,scanning:`扫描中...`,scanProgress:`扫描中... {{scanned}}/{{total}}`,foundPrinters:`发现 {{count}} 台打印机`,noPrintersFound:`未找到打印机`,noPrintersFoundSubnet:`在指定子网中未找到打印机。`,noPrintersFoundNetwork:`在网络上未找到打印机。`,allConfigured:`所有发现的打印机已配置完毕。`,alreadyAdded:`已添加`,select:`选择`,manualEntry:`手动输入`,addFromCloud:`从云端添加`,subnetToScan:`要扫描的子网`,dockerNote:`检测到 Docker 环境。请以 CIDR 格式输入打印机所在子网。需要在 docker-compose.yml 中设置 network_mode: host。`,scanSubnet:`扫描子网查找打印机`,discoverNetwork:`在网络上发现打印机`,scanningSubnet:`正在扫描子网查找拓竹打印机...`,scanningNetwork:`正在扫描网络...`,serialRequired:`需要序列号`,unknown:`未知`,failedToStart:`启动发现失败`,customSubnetOption:`自定义子网...`,customSubnetLabel:`自定义子网 (CIDR)`,customSubnetNote:`如果您的打印机与此服务器位于不同的网络中，请使用自定义子网。FTP (990) 和 MQTT (8883) 端口必须能够跨路由边界访问。`},drying:{start:`开始干燥`,stop:`停止干燥`,temperature:`温度`,duration:`时长`,hours:`小时`,timeRemaining:`剩余 {{time}}`,active:`干燥中`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`不支持干燥`,powerRequired:`连接AMS电源适配器以启用干燥`,cannotDryNow:`AMS 当前无法开始干燥`,startingDrying:`正在启动干燥...`,toastCommandSent:`已发送干燥命令`,toastStopped:`已停止干燥`,toastNotStarted:`打印机已接受命令，但 AMS 未开始干燥。请检查 AMS 电源适配器是否已连接，以及打印机是否处于空闲状态。`,screenOnly:`此打印机的 AMS 干燥只能在打印机自带的屏幕上操作（Bambu 的限制）`,stoppingDrying:`正在停止干燥...`,rotateTray:`干燥时旋转料盘`,rotateUnavailableReason:`不可用 — 此 AMS 中有插槽已装入打印头。料盘被送料管固定，无法旋转。请先回退耗材。`,startMode:`开始时间`,modeNow:`立即`,modeDelay:`延迟后`,modeAtTime:`指定时间`,schedule:`预约`,scheduledFor:`干燥已预约：{{time}}`,scheduledAsap:`干燥已预约（等待打印机）`,cancelScheduled:`取消预约干燥`,scheduleFailed:`预约干燥失败`,retractFilament:`请退回AMS出口处的耗材后再开始干燥`,waitingAmsNotFound:`正在等待检测到AMS`,waitingOffline:`正在等待打印机上线`,waitingPrinterBusy:`正在等待打印机空闲`,waitingAlreadyDrying:`正在等待当前干燥周期结束`,waitingInterrupted:`已中断，将在打印机空闲后重新开始`,scheduleFailedReason:`预约干燥失败：{{reason}}`,scheduleFailedUnknown:`未知错误`,dismissFailed:`忽略`},amsBackup:{titleOn:`AMS 备用料盘已开启。点击以禁用。`,titleOff:`AMS 备用料盘已关闭。点击以启用。`,titleUnknown:`本打印机不支持读取 AMS 备用料盘状态。`,toastEnabled:`AMS 备用料盘已启用`,toastDisabled:`AMS 备用料盘已禁用`,modalTitle:`AMS 备用料盘`,modalHelp:`当前料槽用尽时，打印机会按此顺序在使用相同预设和颜色的料槽之间循环。`,modalNoSlots:`未加载耗材。`,modalNoPairs:`没有备用料盘对 — 没有两个料槽同时匹配预设和颜色。`,extruderRightShort:`右`,extruderLeftShort:`左`,stateOn:`已启用`,stateOff:`已禁用`,stateUnknown:`此打印机不支持`},activeJobSlot:{title:`此料槽在当前打印中是耗材 {{n}}`,ariaLabel:`当前打印料槽 {{n}}`},expectedSlot:{title:`打印机正在等待此料槽装入耗材`,ariaLabel:`需要装料的料槽 {{n}}`,label:`{{ams}} · 料槽 {{slot}}`,external:`外部料卷`},filaments:`耗材`,externalSpool:{hide:`隐藏外部料卷`,show:`显示外部料卷`},openCameraOverlay:`打开摄像头叠加层`,openCameraWindow:`在新窗口中打开摄像头`,firmwareUpdateAvailable:`固件更新可用：{{current}} → {{latest}}`,firmwareUpToDate:`固件 {{version}} — 已是最新`,firmwareUpdateButton:`更新`,plateDetection:{noPermission:`您没有更新打印机的权限`,enabledClick:`打印板检查已启用 - 点击禁用`,disabledClick:`打印板检查已禁用 - 点击启用`,manageCalibration:`管理打印板检测校准`,calibrationRequired:`需要校准`,calibrationInstructions:`请确保构建板<strong>完全空置</strong>，然后点击校准。`,calibrationDescription:`校准会拍摄空置打印板的参考图像。后续检查将与此参考进行比较以检测物体。`,calibrationTip:`<strong>提示：</strong>您最多可以为不同的打印板存储5个校准。系统会在检查时自动使用最佳匹配。`,plateEmpty:`打印板似乎是空的`,objectsDetected:`在打印板上检测到物体`,confidence:`置信度`,difference:`差异`,analysisPreview:`分析预览：`,analysisLegend:`绿色框 = 检测区域，红色覆盖 = 与校准的差异`,savedReferences:`已保存的参考 ({{count}}/{{max}})`,deleteReference:`删除参考`,labelPlaceholder:`标签...`,clickToEdit:`{{label}} - 点击编辑`,clickToAddLabel:`点击添加标签`},speed:{title:`打印速度`,silent:`静音 (50%)`,standard:`标准 (100%)`,sport:`运动 (124%)`,ludicrous:`疯狂 (166%)`},airduct:{title:`风道模式`,cooling:`制冷`,heating:`加热`},noSdCard:`无SD`,door:{open:`开`,closed:`关`},fans:{partCooling:`零件冷却风扇`,auxiliary:`辅助风扇`,leftAuxiliary:`左辅助风扇`,exhaust:`排气`,chamber:`腔室风扇`},clickToViewHmsErrors:`点击查看 HMS 错误`,aiDetection:{safe:`安全`,warning:`警告`,failure:`失败`,idle:`空闲`,error:`未检测`,unknown:`启动中`,tooltipError:`AI 故障检测未检测此次打印：{{reason}} - 点击查看详情`,tooltipUnknown:`AI 故障检测：正在等待首个结果 - 点击查看详情`,errorHint:`本次打印未被检测。下方问题解决后，检测将自动恢复。`,tooltip:`AI 故障检测：{{status}}（评分 {{score}}）- 点击查看详情`,tooltipIdle:`AI 故障检测已启用 - 下次打印时开始监控 - 点击查看详情`,modalTitle:`AI 故障检测 - {{name}}`,currentStatus:`状态`,score:`评分`,framesAnalyzed:`已分析帧数`,idleHint:`当前没有正在监控的打印。下次打印时将自动开始监控。`,lastError:`最近错误`,openSettings:`打开设置`},estimatedCompletion:`预计完成时间`,plateNumber:`板 {{number}}`,slotOptions:`槽位选项`,amsPopup:{friendlyName:`AMS 名称`,friendlyNamePlaceholder:`例如 AMS 友好名称`,serialNumber:`序列号`,firmwareVersion:`固件`,save:`保存`,clear:`清除`,noEditPermission:`您没有重命名 AMS 单元的权限`},firmwareModal:{title:`固件更新`,titleUpToDate:`固件信息`,currentVersion:`当前版本：`,latestVersion:`最新版本：`,releaseNotes:`发布说明`,checkingPrereqs:`正在检查前提条件...`,sdCardReady:`SD 卡已就绪。点击下方上传固件。`,uploadedSuccess:`固件已上传到 SD 卡！`,applyInstructions:`在打印机上应用更新：`,step1:`在打印机触摸屏上，前往<strong>设置</strong>`,step2:`导航到<strong>固件</strong>`,step3:`选择<strong>从 SD 卡更新</strong>`,step4:`更新将需要 10-20 分钟`,done:`完成`,starting:`启动中...`,uploadFirmware:`上传固件`,uploadFailed:`上传启动失败：{{error}}`,uploadedToast:`固件已上传！请在打印机屏幕上触发更新。`,availableVersions:`可用版本`,usable:`可用`,unavailable:`不可用`,installed:`已安装`,newerBadge:`较新`,olderBadge:`较旧`,currentBadge:`当前`},accessCodePlaceholder:`留空以保持当前值`,roi:{title:`检测区域 (ROI)`,xStart:`X 起点`,yStart:`Y 起点`,width:`宽度`,height:`高度`,instruction:`调整检测区域以聚焦到构建板。预览中的绿色框显示当前区域。`},developerModeWarning:`以下打印机未启用开发者局域网模式：{{names}}。某些功能可能无法使用。`,howToEnable:`如何启用`,incompatibleFile:`此文件是为 {{slicedFor}} 切片的，但该打印机是 {{printerModel}}`,dropNotPrintable:`只能打印 .gcode 和 .gcode.3mf 文件`,dropToPrint:`拖放以打印`,dropToQueue:`拖放以加入队列`},archives:{media:{title:`打印视频`,download:`下载打印视频`,searching:`正在检查打印机中的视频…`,searchFailed:`无法检查打印机中的视频。`,none:`未找到此打印任务的延时摄影或 IP 摄像头视频片段。`,attachedTimelapse:`已附加的延时摄影`,printerFiles:`仍保存在打印机上的文件`,downloadSelected:`下载所选文件`,printerMissing:`打印机已不在配置中`,timelapseUnavailable:`无法读取延时摄影目录`,ipcamUnavailable:`无法读取 IP 摄像头目录`},title:`打印归档`,no3mfBanner:{title:`最近的一些打印未能附带缩略图归档`,body:`切片机没有在打印机的 SD 卡上留下 .gcode.3mf 文件，因此 Bambuddy 无法获取缩略图或切片机元数据。这通常是因为切片机 (Bambu Studio / OrcaSlicer 的设备选项卡) 中"将发送的文件存储在外部存储中"已关闭。`,docsLink:`查看安装步骤 4`,docsLinkInternalStorage:`为什么会这样`,titleInternalStorage:`最近有些打印留在了打印机的内部存储中`,bodyInternalStorage:`Bambu Studio 把切片文件保存到了打印机的内部存储而不是存储卡上，因此 Bambuddy 通过 FTP 读不到任何东西。在 H2 系列、P2S 和 X2D 上，「打印」按钮总是这样做，只有「发送」才提供选择，而它的默认值也是「缓存」。这些打印仍会带着名称和时间归档，只是没有缩略图和切片元数据。要获得完整归档，请从 Bambuddy 启动打印，或改用 OrcaSlicer 切片；若要继续用 Bambu Studio，请用「发送」并选择「外部存储」，之后再启动打印。以上都需要打印机中插有存储卡或 U 盘。`,titleNoExternalStorage:`最近有些打印无法归档 — 打印机中没有存储介质`,bodyNoExternalStorage:`打印机的插槽中未检测到存储卡或U盘，切片文件无处存放，Bambuddy 也无从读取。插入一个，下次打印就会完整归档。`,titleInternalHistory:`最近有些打印是从打印机里已有的文件启动的`,bodyInternalHistory:`这些打印来自打印机自己的文件库 — 从它的屏幕重新打印、从 Handy 启动，或是先前发送、稍后才打印的文件。Bambuddy 通过 FTP 读取打印文件，而 FTP 只提供存储卡或 U 盘，打印机却把这个文件库放在 FTP 够不到的区域，所以没有 3MF 可读。切片软件的任何设置都改变不了这一点，因为这些打印根本没有发送过文件。它们仍会带着名称和时间归档，并且可以在「编辑归档」里手动填写已用耗材。要获得完整归档，请从 Bambuddy 或你的切片软件启动打印。`,titleFtpsCooloff:`最近有些打印无法归档 — 打印机拒绝了文件连接`,bodyFtpsCooloff:`Bambuddy 打开了打印机的文件传输端口 (FTPS 990)，而打印机回应的内容并不是 TLS，因此无法从它读取任何东西。这些打印仍会带着名称和时间归档，只是没有缩略图和切片元数据。这不是切片软件的设置，也不是你改动了什么 —— 相同型号、相同固件在别的安装上运行正常，受影响的打印机通常过一阵子会自行恢复。出现这种失败后，Bambuddy 会暂停对该打印机的传输五分钟，暂停结束后再回来取文件，所以短暂的一次会自行补全；卡片仍然是空的，说明拒绝持续得比重试更久。触发原因目前尚不清楚。如果反复出现，请在系统页面打开调试日志，并把支持包附在你的报告里。`,titleFtpTransferFailed:`部分近期打印未能归档 — 文件传输超时`,bodyFtpTransferFailed:`切片文件就在打印机的存储卡上，打印机也确实开始传输了，但传输未能在允许的时间内完成。打印开始时，打印机还要同时处理摄像头、状态消息和作业上传，较大的 3MF 文件未必能在这种情况下传完。这些打印仍然保留了名称和时间，只是缺少缩略图和切片数据。这不是切片软件的设置问题，也不是你改动造成的。Bambuddy 会在接下来的十分钟内再取三次文件，因此多数情况会自行补齐；如果卡片仍然是空的，说明那几次尝试同样超时了。若经常出现，请在 设置 > 网络 > FTP 重试 中调高 连接超时。`,dismissLabel:`关闭此通知`},searchPlaceholder:`搜索归档...`,filterByPrinter:`按打印机筛选`,filterByStatus:`按状态筛选`,sortBy:`排序方式`,sortNewest:`最新优先`,sortOldest:`最旧优先`,sortName:`名称`,sortDuration:`时长`,sortLargest:`最大优先`,sortSmallest:`最小优先`,sortSize:`大小`,noArchives:`未找到归档`,noArchivesSearch:`没有匹配搜索的归档`,originalPrintNotVisible:`原始打印不可见 - 请尝试清除筛选条件`,noArchivesYet:`暂无归档`,prints:`条打印`,pagination:{showing:`显示`,to:`至`,of:`共`,show:`每页`,page:`页`,all:`全部`},loadingArchives:`加载归档中...`,releaseToUpload:`释放以上传`,showAll:`显示全部`,showFavoritesOnly:`仅显示收藏`,gridView:`网格视图`,listView:`列表视图`,calendarView:`日历视图`,logView:`打印日志`,manageTags:`管理标签`,showFailedPrints:`显示失败的打印`,hideFailedPrints:`隐藏失败的打印`,hideDuplicates:`隐藏重复项`,viewOriginalPrint:`点击查看原始打印 (#{{id}})`,printTime:`打印时间`,filamentUsed:`耗材用量`,cost:`成本`,preview:`预览`,deleteArchive:`删除归档`,deleteConfirm:`确定要删除此归档吗？`,favorite:`收藏`,unfavorite:`取消收藏`,viewDetails:`查看详情`,status:{completed:`已完成`,failed:`失败`,stopped:`已停止`},toast:{source3mfAttached:`源 3MF 已附加：{{filename}}`,failedUploadSource3mf:`上传源 3MF 失败`,source3mfRemoved:`源 3MF 已移除`,failedRemoveSource3mf:`移除源 3MF 失败`,f3dAttached:`F3D 已附加：{{filename}}`,failedUploadF3d:`上传 F3D 失败`,f3dRemoved:`F3D 已移除`,failedRemoveF3d:`移除 F3D 失败`,timelapseAttached:`延时摄影已附加：{{filename}}`,timelapseAlreadyAttached:`延时摄影已附加`,noMatchingTimelapse:`未找到匹配的延时摄影`,failedScanTimelapse:`扫描延时摄影失败`,failedAttachTimelapse:`附加延时摄影失败`,timelapseRemoved:`延时摄影已移除`,failedRemoveTimelapse:`移除延时摄影失败`,timelapseUploaded:`延时摄影已上传：{{filename}}`,failedUploadTimelapse:`上传延时摄影失败`,archiveDeleted:`归档已删除`,failedDeleteArchive:`删除归档失败`,addedToFavorites:`已添加到收藏`,removedFromFavorites:`已从收藏中移除`,projectUpdated:`项目已更新`,failedUpdateProject:`更新项目失败`,linkCopied:`链接已复制到剪贴板`,failedCopyLink:`复制链接失败`,photoDeleted:`照片已删除`,failedDeletePhoto:`删除照片失败`,failedDeleteArchives:`删除归档失败`,failedUpdateFavorites:`更新收藏失败`,exportDownloaded:`导出已下载`,exportFailed:`导出失败`},menu:{print:`打印`,openInBambuStudio:`在切片软件中打开`,slice:`切片`,externalLink:`外部链接`,viewOnMakerWorld:`在 MakerWorld 上查看`,preview3d:`3D 预览`,viewTimelapse:`查看延时摄影`,scanForTimelapse:`扫描延时摄影`,uploadTimelapse:`上传延时摄影`,removeTimelapse:`移除延时摄影`,downloadSource3mf:`下载源 3MF`,uploadSource3mf:`上传源 3MF`,replaceSource3mf:`替换源 3MF`,removeSource3mf:`移除源 3MF`,uploadF3d:`上传 F3D`,replaceF3d:`替换 F3D`,downloadF3d:`下载 F3D`,removeF3d:`移除 F3D`,download:`下载`,copyDownloadLink:`复制下载链接`,qrCode:`二维码`,viewPhotos:`查看照片`,viewPhotosCount:`查看照片 ({{count}})`,projectPage:`项目页面`,addToFavorites:`添加到收藏`,removeFromFavorites:`从收藏中移除`,edit:`编辑`,printLog:`打印记录`,goToProject:`前往项目：{{name}}`,addToProject:`添加到项目`,removeFromProject:`从项目中移除`,loading:`加载中...`,noProjectsAvailable:`无可用项目`,searchProjects:`搜索项目…`,select:`选择`,deselect:`取消选择`,delete:`删除`},permission:{noReprint:`您没有重新打印此归档的权限`,noAddToQueue:`您没有添加到队列的权限`,noUpdateArchives:`您没有更新归档的权限`,noUploadFiles:`您没有上传文件的权限`,noDownload:`您没有下载归档的权限`,noCopyLink:`您没有复制下载链接的权限`,noDelete:`您没有删除此归档的权限`,noEdit:`您没有编辑此条目的权限`,noCreate:`您没有创建归档的权限`},platePicker:{title:`选择要预览的打印板`,hint:`此存档包含多个打印板。选择一个在 GCode 查看器中打开。`,plateLabel:`打印板 {{index}}`,objectCount:`{{count}} 个对象`,objectCount_plural:`{{count}} 个对象`,noGcode:`此存档没有可预览的已切片 G 代码。请先在 Bambu Studio 中打开并切片。`},card:{previousPlate:`上一个板`,nextPlate:`下一个板`,plateNumber:`板 {{index}}`,moreOptions:`右键查看更多选项`,addToFavorites:`添加到收藏`,removeFromFavorites:`从收藏中移除`,cancelled:`已取消`,failed:`失败`,duplicate:`重复`,duplicateTitle:`此模型之前已打印过`,openSource3mf:`在 Bambu Studio 中打开源 3MF（右键查看更多选项）`,downloadF3d:`下载 Fusion 360 设计文件`,viewTimelapse:`查看延时摄影`,viewPhoto:`查看 1 张照片`,viewPhotos:`查看 {{count}} 张照片`,openFolder:`打开文件夹：{{name}}`,slicedFile:`已切片文件 - 可以打印`,sourceFile:`仅源文件 - 无 AMS 映射可用`,gcode:`GCODE`,source:`源文件`,project:`项目：{{name}}`,runsBadge:`{{count}} 次打印`,runsBadgeTitle:`共 {{count}} 次打印 — 成功 {{successful}} 次，失败 {{failed}} 次。点击查看完整打印记录。`,estimated:`预计：{{time}}`,actual:`实际：{{time}}`,accuracy:`准确度：{{percent}}%`,filament:`{{weight}} 克`,layer:`{{count}} 层`,layers:`{{count}} 层`,object:`{{count}} 个对象`,objects:`{{count}} 个对象`,slicedFor:`为 {{model}} 切片`,uploadedBy:`上传者`,noPermissionReprint:`您没有重新打印的权限`,noFileForReprint:`无可用的 3MF 文件 — 打印记录时无法从打印机下载该文件`,slicerAmsMapping:`已保存 AMS 映射（{{printer}}）`,slicerAmsMappingTooltip:`切片软件选择的 AMS 槽位已为 {{printer}} 保存。槽位编号只在该打印机上有意义，因此只有再次发往 {{printer}} 时，重新打印才会复用它们。`,noPermissionEdit:`您没有编辑归档的权限`,noPermissionDelete:`您没有删除归档的权限`,openInBambuStudio:`在切片软件中打开`,openInBambuStudioToSlice:`在切片软件中打开进行切片`,slice:`切片`,externalLink:`外部链接`,makerWorld:`MakerWorld：{{designer}}`,viewProject:`查看项目`,noExternalLink:`无外部链接`,preview3d:`3D 预览`,download:`下载`,edit:`编辑`,delete:`删除`},runLog:{title:`打印记录`,modalTitle:`打印记录 — {{name}}`,modalTitleFallback:`此归档`,empty:`此归档尚未记录任何打印事件。`,col:{date:`日期`,status:`状态`,duration:`时长`,filament:`耗材`,cost:`成本`},status:{completed:`已完成`,failed:`失败`,cancelled:`已取消`,stopped:`已停止`,skipped:`已跳过`,printing:`打印中`}},modal:{deleteArchive:`删除归档`,deleteConfirm:`确定要删除"{{name}}"吗？此操作无法撤销。`,deleteButton:`删除`,deletePurgeStats:`同时从快速统计中删除此打印（耗材、时间、成本、能耗）`,deleteQueueItemsWarning:`与此归档关联的 {{count}} 个队列项也将被移除。`,deleteBlockedByPrinting:`无法删除 — {{count}} 个队列项正在打印。请先停止打印再重试。`,removeSource3mf:`移除源 3MF`,removeSource3mfConfirm:`确定要从"{{name}}"中移除源 3MF 文件吗？这将删除原始切片项目文件。`,removeButton:`移除`,removeF3d:`移除 F3D`,removeF3dConfirm:`确定要从"{{name}}"中移除 Fusion 360 设计文件吗？`,removeTimelapse:`移除延时摄影`,removeTimelapseConfirm:`确定要从"{{name}}"中移除延时摄影视频吗？`,timelapse:`{{name}} - 延时摄影`,selectTimelapse:`选择延时摄影`,selectTimelapseDesc:`未找到自动匹配。请选择此打印的延时摄影：`,deleteArchives:`删除归档`,deleteArchivesConfirm:`确定要删除 {{count}} 个归档吗？此操作无法撤销。`,deleteCount:`删除 {{count}} 个`},page:{title:`归档`,printsCount:`{{filtered}} / {{total}} 次打印`,dropFilesHere:`将 .3mf 文件拖放到此处`,releaseToUpload:`释放以上传`,only3mfSupported:`仅支持 .3mf 文件`,close:`关闭`,selected:`已选择 {{count}} 个`,selectAll:`全选`,tags:`标签`,project:`项目`,favorite:`收藏`,delete:`删除`,toggledFavorites:`已切换 {{count}} 个归档的收藏状态`,failedUpdateFavorites:`更新收藏失败`,archivesDeleted:`已删除 {{count}} 个归档`,failedDeleteArchives:`删除归档失败`,photoDeleted:`照片已删除`,failedDeletePhoto:`删除照片失败`},list:{name:`名称`,printer:`打印机`,date:`日期`,size:`大小`,actions:`操作`,hasTimelapse:`有延时摄影`},log:{date:`日期`,printName:`打印名称`,printer:`打印机`,user:`用户`,status:`状态`,duration:`时长`,filament:`耗材`,filamentUsed:`耗材用量`,cost:`成本`,energy:`电量`,energyCost:`电费`,completedAt:`完成时间`,columns:`列`,sortBy:`按{{column}}排序`,allPrinters:`所有打印机`,allUsers:`所有用户`,allStatuses:`所有状态`,cancelled:`已取消`,skipped:`已跳过`,dateFrom:`从`,dateTo:`到`,noEntries:`未找到打印日志条目`,showing:`显示 {{count}} / {{total}} 条`,rowsPerPage:`行数`,page:`页`,prev:`上一页`,next:`下一页`,clearLog:`清除日志`,clearLogTitle:`清除打印日志`,clearLogConfirm:`所有打印日志条目将被永久删除。归档和队列项目不受影响。此操作无法撤销。确定要继续吗？`,clearLogButton:`全部清除`,cleared:`已清除 {{count}} 条日志`,clearFailed:`清除打印日志失败`,deleteEntryTitle:`删除打印日志条目`,deleteEntryConfirm:`此条目将从日志中删除，其耗材、时间和成本贡献也将从快速统计中移除。对应的归档（如果有）不受影响。此操作无法撤销。`,entryDeleted:`已删除打印日志条目`,entryDeleteFailed:`删除打印日志条目失败`,editEntryTitle:`编辑打印日志条目`,editEntryDescription:`对这次打印进行分类。故障分析小部件按这些值分组，因此更新会立即反映在统计数据中。`,entryUpdated:`已更新打印日志条目`,entryUpdateFailed:`更新打印日志条目失败`,statuses:{completed:`已完成`,failed:`失败`,stopped:`已停止`,cancelled:`已取消`,skipped:`已跳过`}}},dispatchToast:{untitled:`打印任务`,startingPrints:`正在开始打印`,progressSummary:`{{complete}}/{{total}} 已完成 • 处理中: {{processing}}`,expandDetails:`展开派发详情`,collapseDetails:`收起派发详情`,awaitingPrinter:`等待打印机响应…`,status:{processing:`处理中`,completed:`已完成`,failed:`失败`},failed:{generic:`派发失败`,upload_failed:`上传到打印机失败`,start_command_failed:`打印机拒绝了开始命令`},dismiss:`关闭`},pipelineRuns:{title:`流水线运行`,loading:`加载中…`,empty:`暂无流水线运行。`,filter:{pipeline:`流水线`,status:`状态`,target:`目标`,all:`全部`,allPipelines:`全部流水线`,allStatus:`全部状态`,allTargets:`全部目标`,clear:`清除筛选`,noMatches:`没有运行匹配当前筛选条件。`},totalCount_one:`{{n}} 次运行`,totalCount_other:`{{n}} 次运行`,copies:`{{n}} 份`,failedCount:`{{n}} 失败`,copyN:`副本 {{n}}`,retryFailed:`重试失败的`,retryOf:`#{{n}} 的重试`,pagination:`{{total}} 中的 {{start}}–{{end}}`,toast:{cancelled:`运行已取消`,cancelFailed:`取消失败`,retryStarted:`已开始重试`,retryFailed:`重试失败`,cleared:`已清除 {{n}} 次运行`,clearFailed:`清除失败`},clearLog:`清除日志`,clearConfirmTitle:`清除日志？`,clearConfirmBody:`删除所有已完成、失败、已取消和部分失败的流水线运行？进行中的运行将保留。此操作无法撤销。`,clearConfirmAction:`清除`,jobStatus:{pending:`等待中`,awaiting_printer:`等待打印机`,queued:`排队中`,printing:`打印中`,completed:`已完成`,failed:`失败`,cancelled:`已取消`},cancelledByUser:`用户已取消`},queue:{filamentShort:{rowBadge:`所分配料盘的耀丝不足`,rowTooltip:`调度程序已标记该项。点击播放查看各插槽的赤字并决定是否仍要打印。`,confirmTitle:`耀丝不足`,confirmIntro:`所分配的料盘至少有一个插槽无法满足。仍要打印吗？`,lineItem:`插槽 {{slot}}：需要 {{required}} g，剩余 {{remaining}} g`,unknown:`未知`,printAnyway:`仍要打印`},slicerAmsMapping:{rowBadge:`已为此打印机保存 AMS 槽位`,rowTooltip:`此存档保留了切片软件选择的确切 AMS 槽位，并为该项目的目标打印机保存。在该打印机上重新打印时，可复用这些料盘，而不必再按类型和颜色重新匹配。`},title:`打印队列`,subtitle:`排程和管理您的打印任务`,editQueueItem:`编辑队列项目`,selectAllPlates:`选择全部 {{count}} 个热床`,deselectAll:`取消全选`,printQueued:`已加入打印队列`,printQueuedWillStartWhenIdle:`打印机空闲时将开始`,itemsQueued:`{{count}} 个任务已加入队列`,sending:`发送中...`,sendingProgress:`发送中 {{current}}/{{total}}...`,adding:`添加中...`,addingProgress:`添加中 {{current}}/{{total}}...`,savingProgress:`保存中 {{current}}/{{total}}...`,clearQueue:`清空队列`,clearHistory:`清除历史`,emptyQueue:`队列为空`,position:`位置`,scheduledTime:`排程时间`,moveUp:`上移`,moveDown:`下移`,startNow:`立即开始`,printingInProgress:`打印进行中...`,viewArchive:`查看归档`,viewInFileManager:`在文件管理器中查看`,itemCount:`{{count}} 个项目`,itemCount_plural:`{{count}} 个项目`,dragToReorder:`拖动以重新排序（仅限尽快）`,reorderHint:`位置仅影响"尽快"项目。排程项目按设定时间运行。`,sjf:{label:`SJF`,tooltip:`最短任务优先 — 调度器优先处理较短的打印任务`},addedBy:`由 {{name}} 添加`,nextInQueue:`队列中的下一个`,clearPlateSuccess:`打印板已清理 — 准备进行下一个打印`,plateNumber:`板 {{index}}`,quantity:`数量`,quantityHint:`创建 {{count}} 个队列项目`,plateQuantityLabel:`{{plate}} 的打印次数`,plateQuantityTotal_one:`共 {{count}} 次`,plateQuantityTotal_other:`共 {{count}} 次`,batchOrders:{title:`批量订单`,emptyTitle:`暂无批量订单`,emptyDescription:`将多盘文件或同一盘的多份副本加入队列，订单就会连同进度显示在这里。`,filter:{active:`进行中`,completed:`已完成`,cancelled:`已取消`,all:`全部`},status:{active:`进行中`,completed:`已完成`,cancelled:`已取消`},noTargets:`仅分组`,noTargetsHint:`创建于按盘目标数量之前，因此跟踪的是已入队的打印，而不是目标数量。`,dispatchRemaining:`将剩余 {{count}} 个加入队列`,dispatchPlate:`将剩余加入队列`,strandedPlate:`没有可复制设置的记录`,strandedNotice:`仍欠的 {{owed}} 次打印中有 {{runs}} 次无法加入队列：该板已没有可复制设置的队列中或已完成的打印。请从文件中将该板加入队列一次，或取消该订单。`,dispatched:`已将 {{name}} 的剩余打印加入队列`,plateProgress:`已完成 {{completed}}/{{target}}`,remaining:`还差 {{count}} 个`,failed:`{{count}} 个失败`,printing:`{{count}} 个打印中`,wholeFile:`整个文件`,due:`截止 {{date}}`,costSoFar:`已花费 {{amount}}`,costRemaining:`(还需 {{amount}})`},activeBatches:`活跃批次`,batchProgress:`已完成 {{completed}}/{{total}}`,cancelBatch:`取消剩余`,batchCancelled:`已取消剩余批次项目`,cancelBatchConfirmTitle:`取消批次`,cancelBatchConfirmMessage:`结束此订单？仍在队列中的打印将被取消，订单也不再要求尚未产出的部分。`,batch:{defaultName:`批次`,label:`{{count}} 项`,label_plural:`{{count}} 项`,pendingCount:`{{count}} 待处理`,pendingCount_plural:`{{count}} 待处理`,expand:`展开批次`,collapse:`折叠批次`,groupAsBatch:`组合为批次…`,groupAsBatchDescription:`将选中的 {{count}} 项组合为一个可折叠的批次。`,nameLabel:`批次名称`,namePlaceholder:`例如：周五礼物`,create:`创建批次`,ungroup:`取消分组`,ungroupConfirmTitle:`取消批次分组？`,ungroupConfirmMessage:`项目将保留在队列中，但不再分组在一起。`,dragGroup:`拖动批次`},tabs:{batches:`批次`,queue:`队列`,history:`历史`,timeline:`时间线`,pipelines:`流水线`},layout:{flatList:`列表`,byPrinter:`按打印机`,groupByPrinter:`按打印机分组`},history:{emptyTitle:`暂无历史`,emptyDescription:`已完成、已取消和失败的打印将在此显示。`,showMore:`显示更多`,showingCount:`显示 {{total}} 项中的 {{shown}} 项`},dragGhost:{multiCount:`{{count}} 项`,batch:`{{name}}（{{count}} 份）`,batch_plural:`{{name}}（{{count}} 份）`},sections:{currentlyPrinting:`正在打印`,queued:`排队中`,history:`历史`},status:{pending:`等待中`,waiting:`等待中`,printing:`打印中`,paused:`已暂停`,completed:`已完成`,failed:`失败`,skipped:`已跳过`,cancelled:`已取消`},summary:{printing:`打印中`,queued:`排队中`,totalTime:`总队列时间`,totalWeight:`总队列重量`,history:`历史`},filter:{allPrinters:`所有打印机`,unassigned:`未分配`,allStatus:`所有状态`,allLocations:`所有位置`,any:`任意`},sort:{byPosition:`按位置排序`,byName:`按名称排序`,byPrinter:`按打印机排序`,bySchedule:`按排程排序`,byDate:`按日期排序`,ascendingOldest:`升序（最旧优先）`,descendingNewest:`降序（最新优先）`},badges:{staged:`已暂存`,requiresPrevious:`需要前一个成功`,autoPowerOff:`自动关机`,gcodeInjection:`G-code`},empty:{title:`没有排程的打印`,description:`从归档页面使用右键菜单中的"排程"选项来排程打印，或拖放文件开始。`},time:{etaIfStartedNow:`若此任务现在开始的预计完成时间`,whenFree:`有空闲打印机时`,overdue:`已逾期`,now:`现在`,lessThanMinute:`不到一分钟`,inMinutes:`{{count}} 分钟后`,inHours:`{{count}} 小时后`},actions:{startPrint:`开始打印`,stopPrint:`停止打印`,requeue:`重新排队`},bulkEdit:{title:`编辑 {{count}} 个项目`,title_plural:`编辑 {{count}} 个项目`,description:`仅更改的设置将应用于所选项目。`,printer:`打印机`,noChange:`— 不更改 —`,queueOptions:`队列选项`,staged:`暂存（手动开始）`,autoPowerOff:`打印后自动关机`,requirePrevious:`要求前一个成功`,gcodeInjection:`注入G-code`,printOptions:`打印选项`,bedLevelling:`热床调平`,flowCalibration:`流量校准`,vibrationCalibration:`振动校准`,layerInspection:`首层检查`,timelapse:`延时摄影`,useAms:`使用 AMS`,nozzleOffsetCali:`喷嘴偏移校准`,applyChanges:`应用更改`,selectAll:`全选`,deselectAll:`取消全选`,selected:`已选择 {{count}} 个`,editSelected:`编辑所选`,cancelSelected:`取消所选`},confirm:{cancelTitle:`取消排程打印`,cancelMessage:`确定要取消"{{name}}"吗？`,stopTitle:`停止打印`,stopMessage:`确定要停止当前打印"{{name}}"吗？这将取消打印机上的打印任务。`,removeTitle:`从历史中移除`,removeMessage:`确定要从队列历史中移除"{{name}}"吗？`,clearHistoryTitle:`清除历史`,clearHistoryMessage:`确定要从历史中移除所有 {{count}} 个项目吗？`,cancelButton:`取消打印`,stopButton:`停止打印`,thisPrint:`此打印`,thisItem:`此项目`},toast:{cancelled:`队列项目已取消`,cancelFailed:`取消项目失败`,removed:`队列项目已移除`,keptForOrder:`已取消而非移除：这是批量订单可以重新排入该板的唯一一次打印`,historyKeptForOrders:`保留了批量订单仍需要的 {{kept}} 项。`,removeFailed:`移除项目失败`,stopped:`打印已停止`,stopFailed:`停止打印失败`,released:`打印已释放到队列`,startFailed:`开始打印失败`,reorderFailed:`重新排序队列失败`,historyCleared:`已清除 {{count}} 条历史记录`,clearHistoryFailed:`清除历史失败`,updateFailed:`更新项目失败`,bulkCancelled:`已取消 {{count}} 个项目`,bulkCancelFailed:`批量取消项目失败`,batchCreated:`已创建批次"{{name}}"`,batchCreateFailed:`创建批次失败`,batchUngrouped:`已取消分组 {{count}} 项`,batchUngroupFailed:`取消批次分组失败`,resumedAfterFailure:`已恢复队列 — {{restored}} 个任务已恢复为待处理`,resumeAfterFailureFailed:`恢复队列失败`},resumeAfterFailure:{banner:`{{printer}} 因之前的打印失败而被阻塞 — 已跳过 {{count}} 个任务`,bannerHint:`解决打印机问题后恢复队列，以还原跳过的任务并清除阻塞。`,button:`失败后恢复`,confirmTitle:`失败后恢复队列？`,confirmMessage:`将 {{printer}} 上的 {{count}} 个跳过的任务恢复为待处理，并清除上一个打印的阻塞。继续之前请确保打印机已就绪。`},timeline:{listView:`列表`,timelineView:`时间线`,unassigned:`未分配`,noData:`当天没有计划的打印任务`,nothingCommitted:`此时间窗口内没有已确定的计划。暂存项目、等待项目以及空闲打印机上的 ASAP 任务不会显示 — 设置计划时间或释放暂存项目以在此处查看。`,allDoneBy:`所有打印预计在 {{time}} 前完成`,staged:`暂存`,filterAll:`全部显示`,filterPrinting:`打印中`,filterQueued:`排队中`,time:{anyMoment:`即将完成`,minutesLeft:`剩余{{minutes}}分钟`,hoursLeft:`剩余{{hours}}小时`,hoursMinutesLeft:`剩余{{hours}}小时{{minutes}}分钟`},day:{previous:`前一天`,next:`后一天`,today:`今天`},window:{back12h:`后退 12 小时`,forward12h:`前进 12 小时`,now:`现在`},printerColumnHeader:`打印机`},permissions:{noStopPrint:`您没有停止打印的权限`,noStartPrint:`您没有开始打印的权限`,noEdit:`您没有编辑此队列项目的权限`,noCancel:`您没有取消此队列项目的权限`,noRequeue:`您没有重新排队的权限`,noRemove:`您没有移除此队列项目的权限`,noClearHistory:`您没有清除所有历史的权限`,noEditItems:`您没有编辑队列项目的权限`,noCancelItems:`您没有取消队列项目的权限`}},stats:{title:`统计`,subtitle:`拖动小部件以重新排列。点击眼睛图标隐藏。`,overview:`概览`,totalPrints:`总打印次数`,successRate:`成功率`,totalPrintTime:`总打印时间`,printTime:`打印时间`,totalFilament:`总耗材用量`,filamentUsed:`耗材用量`,filamentCost:`耗材成本`,totalCost:`总成本`,energyUsed:`能耗`,energyCost:`能源成本`,energyWarmingUpTooltip:`能耗追踪正在收集每小时快照。当所选范围之前至少存在一个快照时，时间段合计将变得准确。早期数值可能偏低。`,averagePrintTime:`平均打印时间`,printsPerDay:`每日打印次数`,byPrinter:`按打印机`,printsByPrinter:`各打印机打印次数`,byMaterial:`按材料`,byMonth:`按月份`,last7Days:`最近 7 天`,last30Days:`最近 30 天`,last90Days:`最近 90 天`,allTime:`全部时间`,quickStats:`快速统计`,printActivity:`打印活动`,filamentTypes:`耗材类型`,filamentTrends:`耗材趋势`,failureAnalysis:`失败分析`,timeAccuracy:`时间准确度`,successful:`成功：`,failed:`失败：`,cancelled:`已取消：`,perfectEstimate:`100% = 完美估计`,noTimeAccuracyData:`暂无时间准确度数据`,noFilamentData:`暂无耗材数据`,noPrinterData:`暂无打印机数据`,noPrintData:`暂无打印数据`,noPrintDataLast30Days:`最近 30 天无打印数据`,failureReasons:`失败原因`,topFailureReasons:`主要失败原因`,failedPrintsCount:`{{failed}} / {{total}} 次打印失败`,lastWeekRate:`上周：{{rate}}%`,resetLayout:`重置布局`,recalculateCosts:`重新计算成本`,recalculateCostsHint:`使用当前耗材价格重新计算所有归档成本`,exportStats:`导出统计`,exportAsCsv:`导出为 CSV`,exportAsExcel:`导出为 Excel`,hiddenCount:`{{count}} 个已隐藏`,exportDownloaded:`导出已下载`,exportFailed:`导出失败`,layoutReset:`布局已重置`,recalculatedCosts:`已为 {{count}} 个归档重新计算成本`,recalculateFailed:`重新计算成本失败`,loadingStats:`加载统计数据中...`,noPermissionResetLayout:`您没有重置布局的权限`,noPermissionRecalculate:`您没有重新计算成本的权限`,noPrintDataInRange:`所选范围内无打印数据`,periodFilament:`期间耗材`,periodCost:`期间成本`,avgPerPrint:`每次打印平均`,usageOverTime:`随时间的使用量`,energyOverTime:`随时间的能耗`,filamentByWeight:`重量`,printDuration:`打印时长`,printerUtilization:`打印机利用率`,filamentSuccess:`按材料成功率`,printHabits:`打印习惯`,printTimeOfDay:`打印时段`,colorDistribution:`颜色分布`,noColorData:`暂无颜色数据`,records:`记录`,longestPrint:`最长打印`,heaviestPrint:`最重打印`,mostExpensivePrint:`最贵打印`,busiestDay:`最忙碌的一天`,successStreak:`连续成功`,streakPrint:`连续打印`,streakPrints:`{{count}} 次连续打印`,printerStats:`打印机统计`,hours:`小时`,avgPrints:`平均打印`,noArchiveData:`暂无打印数据`,filamentByTime:`时间`,avgWeight:`平均重量`,avgTime:`平均时间`,filamentByPrints:`打印次数`,timeframe:{today:`今天`,"this-week":`本周`,"this-month":`本月`,"last-7":`最近 7 天`,"last-30":`最近 30 天`,"last-90":`最近 90 天`,"this-year":`今年`,"all-time":`全部时间`,custom:`自定义范围`,from:`从`,to:`到`},allUsers:`所有用户`,noUser:`无用户（系统）`,filterByUser:`按用户筛选`},maintenance:{title:`维护`,overview:`概览`,allOk:`所有维护均已完成`,dueCount:`{{count}} 项到期`,dueCount_plural:`{{count}} 项到期`,warningCount:`{{count}} 个警告`,warningCount_plural:`{{count}} 个警告`,totalPrintTime:`总打印时间`,nextMaintenance:`下次维护`,nothingDue:`无到期项目`,tasks:`任务`,lastPerformed:`上次执行`,interval:`间隔`,hoursRemaining:`剩余 {{hours}} 小时`,hoursOverdue:`逾期 {{hours}} 小时`,markDone:`标记为完成`,performMaintenance:`执行维护`,history:`历史`,noHistory:`无维护历史`,editPrintHours:`编辑打印时间`,currentHours:`当前小时数`,statusTab:`状态`,settingsTab:`设置`,overdueCount:`{{count}} 个逾期`,dueSoonCount:`{{count}} 个即将到期`,dueSoon:`即将到期`,allGood:`一切正常`,overdueBy:`逾期 {{duration}}`,dueIn:`{{duration}} 后到期`,timeLeft:`剩余 {{duration}}`,day:`1 天`,days:`{{count}} 天`,week:`1 周`,weeks:`{{count}} 周`,month:`1 个月`,months:`{{count}} 个月`,year:`1 年`,maintenanceTypes:`维护类型`,maintenanceTypesDescription:`系统类型和您的自定义维护任务`,addCustomType:`添加自定义类型`,restoreDefaults:`恢复默认任务`,intervalType:`间隔类型`,intervalValue:`间隔 ({{type}})`,icon:`图标`,documentationLink:`文档链接（可选）`,assignToPrinters:`分配给打印机`,selectAtLeastOnePrinter:`至少选择一台打印机`,addType:`添加类型`,custom:`自定义`,printHours:`打印小时数`,calendarDays:`日历天数`,exampleName:`例如：更换 HEPA 过滤器`,viewDocumentation:`查看文档`,timeBasedInterval:`基于时间的间隔`,intervalOverrides:`间隔覆盖`,intervalOverridesDescription:`为特定打印机自定义间隔`,assignedToPrinters:`已分配给打印机：`,noPrintersAssigned:`未分配打印机`,addPrinterShort:`添加：`,printersAssignedClick:`已分配 {{count}} 台打印机 - 点击管理`,removeFromPrinter:`从此打印机移除`,types:{lubricateCarbonRods:`润滑碳纤维杆`,lubricateRails:`润滑线性导轨`,cleanNozzle:`清洁喷嘴/热端`,checkBelts:`检查皮带张力`,cleanBuildPlate:`清洁构建板`,checkExtruder:`检查挤出机齿轮`,checkCooling:`检查冷却风扇`,generalInspection:`综合检查`,cleanCarbonRods:`清洁碳纤维杆`,lubricateSteelRods:`润滑钢杆`,cleanSteelRods:`清洁钢杆`,cleanLinearRails:`清洁线性导轨`,checkPtfeTube:`检查 PTFE 管`,replaceHepaFilter:`更换 HEPA 过滤器`,replaceCarbonFilter:`更换活性炭过滤器`,lubricateLeftNozzleRail:`润滑左喷嘴导轨`},maintenanceComplete:`维护已标记为完成`,typeUpdated:`维护类型已更新`,typeDeleted:`维护类型已删除`,defaultsRestored:`已恢复 {{count}} 个默认任务`,printHoursUpdated:`打印小时数已更新`,printerAssigned:`打印机已分配`,printerRemoved:`打印机已移除`,deleteTypeConfirm:`删除"{{name}}"？`,deleteSystemTypeTitle:`删除默认维护任务？`,deleteSystemTypeMessage:`确定要删除默认维护任务"{{name}}"吗？`,noPermissionUpdate:`您没有更新维护项目的权限`,noPermissionPerform:`您没有执行维护的权限`,noPermissionEditTypes:`您没有编辑维护类型的权限`,noPermissionDeleteTypes:`您没有删除维护类型的权限`,noPermissionEditHours:`您没有编辑打印时间的权限`,noPermissionRemovePrinter:`您没有移除打印机分配的权限`,noPermissionAssignPrinter:`您没有分配打印机的权限`,noPermissionEditIntervals:`您没有编辑间隔的权限`,configureSettings:`配置维护类型和间隔`},settings:{sliceEngine:`切片引擎`,sliceEngineSidecar:`服务器 sidecar`,sliceEngineSidecarHint:`切片在服务器上的切片 sidecar 容器中运行。`,sliceEngineBrowser:`在浏览器中`,sliceEngineBrowserHint:`切片在本设备上运行，不经过服务器。`,title:`设置`,general:`通用`,tabs:{general:`通用`,smartPlugs:`智能插座`,sensors:`传感器`,notifications:`通知`,queue:`工作流`,queueDispatch:`队列与调度`,queuePipelines:`流水线`,filament:`耗材`,network:`网络`,apiKeys:`API 密钥`,virtualPrinter:`虚拟打印机`,spoolbuddy:`SpoolBuddy`,failureDetection:`故障检测`,users:`身份验证`,backup:`备份`,emailAuth:`邮箱认证`,ldap:`LDAP`,twoFa:`双因素认证`,oidc:`SSO / OIDC`,security:`安全`},spoolbuddy:{infoTitle:`SpoolBuddy 设备`,infoBody:`SpoolBuddy kiosk 通过心跳自动注册。如果设备不再使用，或守护进程崩溃遗留了陈旧的重复项，可在此注销。`,duplicatesTitle:`已注册 {{count}} 台设备`,duplicatesBody:`kiosk 界面只使用最先注册的设备。如果其中有因崩溃遗留的陈旧重复项，请注销它——在线设备会在下次心跳时重新注册自己。`,empty:`尚未注册任何 SpoolBuddy 设备。`,online:`在线`,offline:`离线`,unregister:`注销`,unregisterSuccess:`设备已注销`,unregisterError:`注销设备失败`,confirmTitle:`注销 SpoolBuddy 设备？`,confirmBody:`将从数据库中移除 "{{hostname}}" ({{deviceId}})。如果设备在线，会在下次心跳时重新注册自己。`,ipAddress:`IP 地址`,firmware:`固件`,lastSeen:`上次在线`,daemonUptime:`守护进程运行时间`,systemUptime:`系统运行时间`,never:`从未`,nfc:`NFC`,scale:`秤`,cpuTemp:`CPU 温度`,cpuLoad:`CPU 负载`,memory:`内存`,disk:`磁盘`,update:`更新`,updateConfirmTitle:`更新 SpoolBuddy 守护进程？`,updateConfirmBody:`对 "{{hostname}}" 触发软件更新？更新完成后守护进程将重启。`,restartBrowser:`重启浏览器`,restartBrowserConfirmTitle:`重启 kiosk 浏览器？`,restartBrowserConfirmBody:`在 "{{hostname}}" 上重启 kiosk 浏览器？显示将短暂黑屏。`,restartDaemon:`重启守护进程`,restartDaemonConfirmTitle:`重启 SpoolBuddy 守护进程？`,restartDaemonConfirmBody:`在 "{{hostname}}" 上重启 SpoolBuddy 守护进程？设备将离线几秒钟。`,reboot:`重启`,rebootConfirmTitle:`重启设备？`,rebootConfirmBody:`重启 "{{hostname}}"？设备将离线约一分钟。`,shutdown:`关机`,shutdownConfirmTitle:`关闭设备？`,shutdownConfirmBody:`关闭 "{{hostname}}"？您需要物理访问才能重新开机。`,commandConfirm:`确认`,commandQueued:`命令已加入队列`,commandError:`发送命令失败`},ldap:{title:`LDAP 认证`,enabledDesc:`LDAP 认证已启用`,disabledDesc:`LDAP 认证已禁用`,disabledHint:`在下方配置并保存 LDAP 设置，然后启用。`,enabled:`LDAP 认证已启用`,disabled:`LDAP 认证已禁用`,feature1:`用户可以使用 LDAP 凭据登录`,feature2:`本地管理员帐户作为后备保留`,feature3:`登录时 LDAP 组映射到 BamBuddy 组`,serverConfig:`LDAP 服务器配置`,serverUrl:`服务器 URL`,serverUrlHint:`使用 ldap:// 进行标准连接或 ldaps:// 进行 SSL 连接`,security:`安全`,securityHint:`StartTLS 将普通连接升级为 TLS。LDAPS 从一开始就使用 TLS。`,bindDn:`绑定 DN（服务帐户）`,bindPassword:`绑定密码`,searchBase:`搜索基础 DN`,userFilter:`用户搜索过滤器`,userFilterHint:`{username} 替换为登录用户名。OpenLDAP 使用 (uid={username})。`,advanced:`高级`,autoProvision:`自动创建用户`,autoProvisionHint:`首次 LDAP 登录时自动创建 BamBuddy 帐户`,defaultGroup:`默认组`,defaultGroupNone:`— 无（无回退）—`,defaultGroupHint:`当 LDAP 用户通过身份验证但不在任何已映射的 LDAP 组中时分配的回退组。留空以使未映射的用户没有权限。`,groupMapping:`组映射（JSON）`,groupMappingHint:`将 LDAP 组 DN 映射到 BamBuddy 组。可用组：`,testConnection:`测试连接`,settingsSaved:`LDAP 设置已保存`,errors:{serverRequired:`LDAP 服务器 URL 为必填项`,searchBaseRequired:`搜索基础 DN 为必填项`,enableAuthFirst:`请先启用认证`,configureLdapFirst:`请先保存 LDAP 设置`}},email:{smtpSettings:`SMTP 配置`,smtpHost:`SMTP 服务器`,smtpPort:`SMTP 端口`,security:`安全`,authentication:`认证`,username:`用户名`,password:`密码`,fromEmail:`发件邮箱`,fromName:`发件人名称`,testConnection:`测试 SMTP 连接`,testRecipient:`测试收件邮箱`,sendTest:`发送测试邮件`,sending:`发送中...`,save:`保存设置`,saving:`保存中...`,advancedAuth:`高级认证`,advancedAuthEnabled:`高级认证已启用`,advancedAuthEnabledDesc:`基于邮箱的用户管理功能已激活。新用户将通过邮件收到自动生成的密码，用户可以通过忘记密码功能重置密码。`,advancedAuthDisabled:`高级认证已禁用`,advancedAuthDisabledDesc:`启用高级认证以激活基于邮箱的用户管理功能。`,enable:`启用`,disable:`禁用`,feature1:`密码自动生成并通过邮件发送给新用户`,feature2:`用户可以使用用户名或邮箱登录`,feature3:`忘记密码功能可用`,feature4:`管理员可以通过邮件重置用户密码`,errors:{requiredFields:`请填写所有必填字段`,usernameRequired:`启用认证时需要用户名`,enterTestEmail:`请输入测试邮箱地址`,smtpServerAndEmail:`测试前请填写 SMTP 服务器和发件邮箱`,usernamePasswordRequired:`启用认证时需要用户名和密码`,configureSmtpFirst:`请先配置并测试 SMTP 设置`,enableAuthFirst:`请先启用身份验证才能使用基于电子邮件的功能。`},success:{settingsSaved:`SMTP 设置保存成功`},securityOptions:{starttls:`STARTTLS（端口 587）`,ssl:`SSL/TLS（端口 465）`,none:`无（端口 25）`},authOptions:{enabled:`已启用`,disabled:`已禁用`}},appearance:`外观`,notifications:`通知`,smartPlugs:`智能插座`,spoolman:`Spoolman`,updates:`更新`,language:`语言`,languageDescription:`选择您的首选语言`,theme:`主题`,themeLight:`浅色`,themeDark:`深色`,themeSystem:`跟随系统`,defaultView:`默认视图`,defaultViewDescription:`打开应用时显示的页面`,checkForUpdates:`检查更新`,autoUpdate:`自动更新`,currentVersion:`当前版本`,latestVersion:`最新版本`,upToDate:`已是最新版本`,updateAvailable:`有可用更新`,notificationLanguage:`通知语言`,notificationLanguageDescription:`推送通知的语言`,bedCooledThreshold:`热床冷却阈值`,bedCooledThresholdDescription:`打印后热床被视为已冷却的温度`,userNotificationsEnabled:`用户通知`,userNotificationsEnabledDescription:`启用用户通知菜单和打印任务事件的邮件通知。需要高级身份验证。`,userNotificationsDisabledHint:`请启用高级身份验证以使用用户通知。`,notificationProviders:`通知提供商`,addProvider:`添加提供商`,editProvider:`编辑提供商`,providerType:`提供商类型`,testNotification:`测试通知`,testSuccess:`测试通知发送成功`,testFailed:`发送测试通知失败`,quietHours:`免打扰时间`,quietHoursDescription:`在此时间段内不发送通知`,quietHoursStart:`开始`,quietHoursEnd:`结束`,events:{title:`通知事件`,printStart:`打印开始`,printComplete:`打印完成`,printFailed:`打印失败`,printStopped:`打印停止`,printProgress:`进度里程碑`,printProgressDescription:`在 25%、50%、75% 时通知`,printerOffline:`打印机离线`,printerError:`打印机错误`,filamentLow:`耗材不足`,maintenanceDue:`维护到期`,maintenanceDueDescription:`需要维护时通知`},smartPlug:{title:`智能插座`,add:`添加智能插座`,edit:`编辑智能插座`,name:`名称`,ipAddress:`IP 地址`,linkedPrinter:`关联打印机`,autoOn:`自动开启`,autoOnDescription:`打印开始时开启`,autoOff:`自动关闭`,autoOffDescription:`打印完成后关闭`,offDelay:`关闭延迟`,offDelayMinutes:`打印后分钟数`,offDelayTemp:`当喷嘴温度低于`,currentState:`当前状态`,turnOn:`开启`,turnOff:`关闭`},filamentTracking:`耗材追踪`,filamentTrackingDesc:`选择如何追踪您的耗材。您可以使用内置库存或连接外部 Spoolman 服务器。`,autoAddUnknownRfid:`自动添加未知 RFID 料盘`,autoAddUnknownRfidDesc:`检测到带有未知 RFID 标签的料盘时，自动创建库存条目。如果您手动预先注册新料盘以避免重复，请关闭此项。`,filamentChecks:`耗材检查`,disableFilamentWarnings:`禁用耗材警告`,disableFilamentWarningsDesc:`在打印或加入队列时不显示耗材不足警告`,preferLowestFilament:`优先使用剩余最少的耗材`,preferLowestFilamentDesc:`当多个料盘匹配时，使用剩余耗材最少的那个`,preferLowestFilamentBackupNote:`仅当打印机端启用了 AMS 备用料盘时才生效——否则当选中的料盘耗尽时，打印机无法切换到备用料盘。`,trackingModeBuiltIn:`内置库存`,trackingModeBuiltInDesc:`包含 RFID 自动匹配和用量追踪`,trackingModeSpoolmanDesc:`外部耗材管理服务器`,builtInFeatureRfid:`自动检测 AMS 中的拓竹 RFID 耗材`,builtInFeatureUsage:`追踪每次打印的耗材消耗`,builtInFeatureCatalog:`管理耗材、颜色和 K 值配置文件`,builtInFeatureThirdParty:`第三方耗材可分配到库存耗材`,amsSyncButton:`从 AMS 同步重量`,amsSyncTitle:`从 AMS 同步耗材重量`,amsSyncMessage:`这将使用已连接打印机的当前 AMS 剩余百分比值覆盖所有库存耗材重量。用于从损坏的重量数据中恢复。打印机必须在线。`,amsSyncing:`同步中...`,amsSyncSuccess:`已同步 {{synced}} 个耗材，跳过 {{skipped}} 个`,amsSyncError:`从 AMS 同步重量失败`,spoolmanAmsSyncButton:`从 AMS 同步 Spoolman 重量`,spoolmanAmsSyncTitle:`从 AMS 同步 Spoolman 耗材重量`,spoolmanAmsSyncMessage:`这将根据已连接打印机的当前 AMS 剩余百分比值更新所有 Spoolman 耗材重量。打印机必须在线。`,spoolmanAmsSyncing:`同步中...`,spoolmanAmsSyncSuccess:`已同步 {{synced}} 个 Spoolman 耗材，跳过 {{skipped}} 个`,spoolmanAmsSyncError:`从 AMS 同步 Spoolman 重量失败`,spoolmanAmsSyncErrorUnreachable:`同步失败（Spoolman 不可访问）`,spoolmanAmsSyncErrorNotConfigured:`同步失败（Spoolman 未配置）`,spoolmanNotConfigured:`Spoolman 未配置`,spoolmanFilamentCatalogTitle:`Spoolman 耗材目录`,spoolmanFilamentCatalogDesc:`来自 Spoolman 的耗材名称和皮重。名称和线轴重量可在此处编辑；其他属性请直接在 Spoolman 中管理。`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`Spoolman 服务器的 URL（例如 http://localhost:7912）`,spoolmanConnected:`已连接`,spoolmanDisconnected:`未连接`,status:`状态`,connect:`连接`,disconnect:`断开`,howSyncWorks:`同步工作原理`,syncInfoRfidOnly:`仅同步带有 RFID 的官方拓竹耗材`,syncInfoAutoCreate:`首次同步时自动在 Spoolman 中创建新耗材`,syncInfoThirdPartySkipped:`非拓竹耗材（第三方、重新填充的）将被跳过`,linkingExistingSpools:`链接现有耗材`,linkingExistingSpoolsDesc:`要将现有的 Spoolman 耗材链接到您的 AMS，请将鼠标悬停在 AMS 槽位上并点击"链接到 Spoolman"。`,syncMode:`同步模式`,syncModeAuto:`自动`,syncModeManual:`仅手动`,syncModeAutoDesc:`检测到更改时自动同步 AMS 数据`,syncModeManualDesc:`仅在手动触发时同步`,syncAmsData:`同步 AMS 数据`,syncAmsDataDesc:`手动将打印机 AMS 数据同步到 Spoolman`,allPrinters:`所有打印机`,noDefaultPrinter:`无默认（每次询问）`,sidebarOrder:`侧边栏顺序`,saveThumbnails:`保存缩略图`,captureFinishPhoto:`拍摄完成照片`,noPrintersConfigured:`未配置打印机`,archiveMode:{always:`始终创建归档条目`,never:`从不创建归档条目`,ask:`每次询问`},checkForUpdatesLabel:`检查更新`,checkPrinterFirmware:`检查打印机固件`,includeBetaUpdates:`包含测试版本`,includeBetaUpdatesDesc:`检查更新时通知测试版和预发布版本`,localLogin:{disable:`禁用本地用户名／密码登录`,disableHint:`启用后，只能通过SSO提供商登录。LDAP不受影响。在服务器上设置 BAMBUDDY_LOCAL_LOGIN=true 可保留恢复通道。`},enableRetry:`启用重试`,homeAssistantDescription:`通过 Home Assistant 控制智能插座`,environmentManagedLabel:`（环境变量管理）`,autoEnabledViaEnv:`通过环境变量自动启用`,urlFromEnvReadOnly:`值由 HA_URL 环境变量设置（只读）`,tokenFromEnvReadOnly:`值由 HA_TOKEN 环境变量设置（只读）`,mqttConnectedTo:`已连接到`,prometheusDescription:`以 Prometheus 格式暴露打印机数据`,noSmartPlugsTitle:`未配置智能插座`,noSmartPlugsDescription:`添加基于 Tasmota 的智能插座以追踪能耗并自动化电源控制。`,noProvidersTitle:`未配置提供商`,noProvidersDescription:`添加提供商以接收警报。`,noTemplatesAvailable:`无可用模板。重启后端以加载默认模板。`,apiPermissionView:`查看打印机状态和队列`,apiPermissionEdit:`添加和移除打印队列中的项目`,apiKeysEmptyTitle:`无 API 密钥`,apiKeysEmptyDescription:`创建 API 密钥以与外部服务集成。`,noUsersFound:`未找到用户`,noGroupsFound:`未找到组`,noGroupsAvailable:`无可用组`,passwordsDoNotMatch:`密码不匹配`,systemGroupWarning:`系统组名称不可更改`,authDisabledTitle:`身份验证已禁用`,authDisabledFeature1:`需要登录才能访问系统`,authDisabledFeature2:`创建多个用户并基于组的权限管理`,authDisabledFeature3:`使用 50+ 个细粒度权限控制访问`,userHasCreated:`此用户已创建：`,userItemsQuestion:`您想如何处理这些项目？`,deleteUserConfirm:`确定要删除此用户吗？`,actionCannotBeUndone:`此操作无法撤销。`,addFirstSmartPlug:`添加您的第一个智能插座`,providers:`提供商`,log:`日志`,testAll:`全部测试`,testResults:`测试结果`,testPassedCount:`{{count}} 个通过`,testFailedCount:`{{count}} 个失败`,messageTemplates:`消息模板`,messageTemplatesDescription:`自定义每个事件的通知消息。`,apiKeys:`API 密钥`,apiKeysDescription:`创建 API 密钥用于外部集成和 Webhook。`,createKey:`创建密钥`,apiKeyCreated:`API 密钥创建成功`,apiKeyCopyWarning:`请立即复制此密钥 - 它不会再次显示！`,useInApiBrowser:`在 API 浏览器中使用`,apiKeyQrButton:`二维码`,apiKeyQrTitle:`扫码配置`,apiKeyQrCaption:`使用手机应用扫描以添加此服务器和 API 密钥。`,apiKeyQrWarning:`包含您的机密 API 密钥——请勿在他人可见的地方分享或截图。`,createNewApiKey:`创建新 API 密钥`,keyName:`密钥名称`,keyNamePlaceholder:`例如：Home Assistant、OctoPrint`,readStatus:`读取状态`,readStatusDescription:`查看打印机状态、队列、资料库、存档和切片机流水线`,manageQueue:`管理队列`,manageQueueDescription:`添加和移除打印队列中的项目。与“管理资料库”配合可运行切片机流水线`,controlPrinter:`控制打印机`,controlPrinterDescription:`暂停、继续和停止打印`,manageLibrary:`管理资料库`,manageLibraryDescription:`上传、重命名、删除和切片资料库文件；从 MakerWorld 导入模型。与“管理队列”配合可运行切片机流水线`,manageInventory:`管理库存`,manageInventoryDescription:`创建、更新和删除耗材盘以及库存记录。SpoolBuddy 终端（NFC 扫描、秤读取、终端系统命令）需要此权限。`,manageMaintenance:`管理维护`,manageMaintenanceDescription:`记录已完成的维护、重置计数器、编辑间隔并管理维护类型目录。适用于在不授予更广泛打印机控制权限的情况下记录"我清洁了喷嘴"的 Home Assistant 自动化。`,manageArchives:`管理打印存档`,manageArchivesDescription:`编辑和删除打印存档，包括移除旧的打印及其统计数据贡献。适用于精简打印历史的自动化。`,manageProjects:`管理项目`,manageProjectsDescription:`创建、更新和删除项目，并向其添加存档。适用于将打印整理到项目中的自动化。`,maintenanceBadge:`维护`,archivesBadge:`存档`,projectsBadge:`项目`,libraryBadge:`资料库`,inventoryBadge:`库存`,cloudAccess:`允许云端访问`,cloudAccessDescription:`代表您读取 Bambu Cloud 预设和耗材。需要登录 Bambu Cloud。`,cloudBadge:`云端`,updateEnergyCost:`更新电价`,updateEnergyCostDescription:`允许此密钥向 /settings/electricity-price POST 新的每千瓦时电价。适用于 Home Assistant 动态电价自动化（Tibber、Octopus 等）。这是唯一可通过 API 密钥写入的设置字段。`,energyCostBadge:`能耗`,legacyKey:`传统`,legacyKeyTooltip:`在按用户所有权之前创建；需重建以使用云端访问`,unnamedKey:`未命名密钥`,lastUsed:`上次使用`,read:`读取`,control:`控制`,createFirstKey:`创建您的第一个密钥`,webhookEndpoints:`Webhook 端点`,webhookApiKeyHint:`在 X-API-Key 请求头中使用您的 API 密钥。`,webhook:{getAllStatus:`获取所有打印机状态`,getSpecificStatus:`获取特定打印机状态`,addToQueue:`添加到打印队列`,pausePrint:`暂停打印`,resumePrint:`继续打印`,stopPrint:`停止打印`},apiBrowser:`API 浏览器`,apiBrowserDescription:`浏览和测试所有可用的 API 端点。`,apiKeyForTesting:`测试用 API 密钥`,apiKeyPlaceholder:`在此粘贴您的 API 密钥以测试需要认证的端点...`,apiKeyHint:`此密钥将作为 X-API-Key 请求头随请求发送。`,deleteApiKeyTitle:`删除 API 密钥`,deleteApiKeyMessage:`确定要删除此 API 密钥吗？使用此密钥的所有集成将停止工作。`,deleteKey:`删除密钥`,amsDisplayThresholds:`AMS 显示阈值`,amsThresholdsDescription:`配置 AMS 湿度和温度指示器的颜色阈值。`,humidity:`湿度`,goodGreen:`良好（绿色）`,fairOrange:`一般（橙色）`,aboveFairBad:`超过一般阈值显示为红色（差）`,fairAlsoDryingThreshold:`此阈值也用于触发自动干燥`,fairBelowDryingFloor:`自动干燥无法达到该值：AMS 在加热时读数为 {{floor}}% 或更高，因此每个周期都会结束并立即重新开始。若使用自动干燥，请将其设为高于 {{floor}}%。`,temperature:`温度`,goodBlue:`良好（蓝色）`,aboveFairHot:`超过一般阈值显示为红色（热）`,tempAlarmThreshold:`告警阈值`,tempAlarmSeparateFromBand:`只有告警阈值会发送通知，良好和一般仅用于显示配色。留空则与此前一致，在一般阈值触发告警。`,tempAlarmMustBePositive:`小于或等于 0 的阈值将被忽略，告警改用一般阈值。`,historyRetention:`历史保留`,keepSensorHistory:`保留传感器历史`,historyRetentionDescription:`较旧的湿度和温度数据将被自动删除`,defaultPrintOptions:`默认打印选项`,defaultPrintOptionsDescription:`设置新打印的默认选项值。可在打印对话框中逐次覆盖。`,defaultBedLevelling:`热床调平`,defaultBedLevellingDesc:`打印前自动调平热床`,defaultFlowCali:`流量校准`,defaultFlowCaliDesc:`校准挤出流量`,defaultVibrationCali:`振动校准`,defaultVibrationCaliDesc:`减少振纹伪影`,defaultLayerInspect:`首层检测`,defaultLayerInspectDesc:`AI首层检测`,defaultTimelapse:`延时摄影`,defaultTimelapseDesc:`录制延时摄影视频`,defaultNozzleOffsetCali:`喷嘴偏移校准`,defaultNozzleOffsetCaliDesc:`校准两个挤出机之间的喷嘴偏移`,tempFanPresetsTitle:`温度与风扇预设`,tempFanPresetsDescription:`自定义打印机卡片温度和风扇速度弹出框中显示的快速选择值。"关闭"按钮始终显示。`,tempFanPresetsNozzle:`喷嘴温度`,tempFanPresetsBed:`热床温度`,tempFanPresetsChamber:`腔室温度`,tempFanPresetsFan:`风扇速度`,tempFanPresetsReset:`恢复默认值`,concurrentUploadsTitle:`并发上传`,concurrentUploadsDescription:`队列可以同时向多少台打印机发送文件。打印机接收文件很慢（大型打印可能需要几分钟），并且每台都要排队等候——因此在打印机较多时，调高该值可以避免批次中最后一台打印机等完前面所有传输。如果网络或 Bambuddy 主机难以承受并行传输，请调低该值。`,concurrentUploadsLabel:`同时上传的打印机数量`,concurrentUploadsHelp:`设为 1 时一次只向一台打印机发送（旧行为）。默认值为 4。`,staggeredStart:`错峰启动`,staggeredStartDescription:`错峰启动多台打印机批次时的默认组大小和间隔。可在打印对话框中按批次覆盖。`,preheatTitle:`预热与热保温`,preheatDescription:`在每个排队打印开始前预热热床（以及支持的话腔体）并保持温度。对于没有腔体主动加热的打印机使用工程材料（PA、ABS）很有帮助 — 保温计时进行时，热床通过辐射温暖腔体。热床目标温度从打印文件读取；腔体行为取决于打印机型号。`,preheatEnabled:`启用预热与保温`,preheatEnabledDesc:`关闭时，排队打印立即开始。每个队列项可按单次打印覆盖。`,preheatFilamentTargetsLabel:`按耗材的腔体目标 (°C)`,preheatFilamentTargetsHint:`Bambuddy 会在已装入的 AMS 槽位中选择最高目标；所有槽位都推导为 0 的打印（PLA、PETG、TPU、PVA）将完全跳过预热并立即开始。`,preheatFilamentTargetsReset:`重置为默认值`,preheatFilamentTargetsDefaultRow:`其他 / 未映射`,preheatMaxWait:`最长等待（秒）`,preheatMaxWaitHelp:`进入保温阶段前的腔体预热阶段上限。`,preheatSoak:`保温（秒）`,preheatSoakHelp:`达到目标或最长等待结束后的保持时间。`,preheatHardwareTitle:`按打印机的行为：`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E 通过 M141 主动加热腔体。X1C/P2S 读取腔体温度但仅靠热床辐射加热。P1S/P1P/A1/A1 Mini 无腔体传感器 — 仅保温计时器生效。`,preheatPerItemDesc:`在本次打印开始前预热热床和腔体。默认使用设置 → 工作流的全局开关。`,preheatOverride_inherit:`继承`,preheatOverride_on:`开启`,preheatOverride_off:`关闭`,calibrationMode_off:`关闭`,calibrationMode_on:`开启`,calibrationMode_auto:`自动`,preheatTargetOverride:`覆盖腔体目标 (°C，留空使用耗材默认)`,preheatTargetOverrideHelp:`0 表示只加热热床并执行保温，不加热腔体。留空时，不需要腔体加热的打印会完全跳过预热。`,plateClear:`热床清空确认`,requirePlateClear:`需要热床清空确认`,requirePlateClearDescription:`启用后，调度器会在已完成打印的打印机上启动排队打印之前，等待每台打印机的热床清空确认。禁用后，也会隐藏打印机卡片上的打印板状态标记和“将打印板标记为已清理”按钮。`,keepBedWarm:`在打印之间保持热床温度`,keepBedWarmDesc:`在等待打印板清空确认时，将热床保持在下方设置的保温温度，使腔室保持温热；若下一个任务的热床温度更高，则使用该温度。仅在下一次打印需要腔室加热（ASA、ABS、PA、PC 等）时适用。需要启用打印板清空确认。`,keepWarmBedTemp:`保温热床温度 (°C)`,keepWarmBedTempHelp:`当热床用于加热腔室时使用：包括保温期间，以及打印文件未包含热床温度时的预热。打印文件中更高的热床温度始终优先。`,keepWarmMaxMinutes:`停止保温的时间（分钟）`,keepWarmMaxMinutesHelp:`若在此时间内未清空打印板，加热器将关闭，而不是无限期保持加热。`,gcodeInjection:`G-code注入`,gcodeInjectionDescription:`为Farmloop、SwapMod、AutoClear和Printflow 3D等自动打印系统配置自定义G-code，在打印开始和/或结束时注入。代码片段按打印机型号配置，在队列项目上启用"注入G-code"时应用。`,gcodeInjectionNoPrinters:`未找到打印机。添加打印机以配置G-code代码片段。`,gcodeStartLabel:`开始G-code`,gcodeEndLabel:`结束G-code`,gcodeStartPlaceholder:`在打印开始前插入的G-code...`,gcodeEndPlaceholder:`在打印结束后追加的G-code...`,staggerGroupSize:`组大小`,staggerGroupSizeHelp:`每组同时启动的打印机数量`,staggerInterval:`间隔（分钟）`,staggerIntervalHelp:`每组启动之间的延迟`,queueDrying:`自动干燥`,queueDryingDescription:`在队列打印之间，打印机空闲时自动干燥AMS耗材。使用上方的湿度阈值触发干燥。`,queueDryingEnabled:`启用自动干燥`,queueDryingEnabledDescription:`当打印机空闲且湿度超过阈值时，自动启动AMS干燥`,queueDryingBlock:`等待干燥完成`,queueDryingBlockDescription:`阻止打印队列直到干燥完成。关闭时，打印优先于干燥。`,ambientDryingEnabled:`环境干燥`,ambientDryingEnabledDescription:`当空闲打印机的湿度超过阈值时自动干燥耗材，无需排队打印。`,printDryingEnabled:`打印时继续干燥`,printDryingEnabledDescription:`允许自动干燥在支持的硬件（H2D、H2C、H2S、P2S、H2D Pro、X2D、X1C、A2L 最新固件）打印过程中继续运行。为保护料盘，干燥温度会自动比空闲时预设低 5°C。`,dryingPresets:`干燥预设`,dryingPresetsDescription:`每种耗材类型的温度和时长。AMS 2 Pro使用较低温度，AMS-HT支持较高温度。`,dryingFilament:`耗材`,humidityThresholds:`湿度阈值`,humidityThresholdsDescription:`按耗材类型设置自动干燥和报警的湿度触发值。同一 AMS 混装时使用最低阈值。`,humidityThresholdCol:`阈值`,humidityThresholdDefault:`默认（未知类型）`,printModal:`打印对话框`,expandCustomMapping:`默认展开自定义映射`,expandCustomMappingDescription:`打印到多台打印机时，默认展开显示每台打印机的 AMS 映射`,authentication:`身份验证`,authEnabledDescription:`您的实例已通过用户身份验证保护`,authDisabledDescription:`启用以要求登录并管理用户访问`,authDisabledMessage:`启用身份验证以创建用户账户、管理权限并保护您的 Bambuddy 实例。`,enableAuthentication:`启用身份验证`,currentUser:`当前用户`,changePassword:`修改密码`,admin:`管理员`,users:`用户`,addUser:`添加用户`,groups:`组`,addGroup:`添加组`,system:`系统`,noDescription:`无描述`,userCount:`{{count}} 个用户`,permissionCount:`{{count}} 个权限`,createUser:`创建用户`,username:`用户名`,enterUsername:`输入用户名`,password:`密码`,enterPassword:`输入密码`,passwordRequirements:`至少 8 个字符，包含一个大写、一个小写、一个数字和一个特殊字符。`,confirmPassword:`确认密码`,confirmPasswordPlaceholder:`确认密码`,viewReleaseOnGitHub:`在 GitHub 上查看发布`,turnAllPlugsOn:`开启所有插座`,turnAllPlugsOff:`关闭所有插座`,clearNotificationLogs:`清除通知日志`,clearLogsMessage:`这将永久删除所有 30 天前的通知日志。此操作无法撤销。`,clearLogs:`清除日志`,resetUiPreferences:`重置 UI 偏好`,resetUiPreferencesMessage:`这将重置所有 UI 偏好为默认值：侧边栏顺序、主题、仪表板布局、视图模式和排序偏好。您的打印机、归档和服务器设置不会受到影响。清除后页面将重新加载。`,resetPreferences:`重置偏好`,deleteGroupTitle:`删除组`,deleteGroupMessage:`确定要删除此组吗？此组中的用户将失去这些权限。`,deleteGroup:`删除组`,disableAuthenticationTitle:`禁用身份验证`,disableAuthenticationMessage:`确定要禁用身份验证吗？这将使您的 Bambuddy 实例无需登录即可访问。所有用户将保留在数据库中但身份验证将被禁用。`,disableAuthentication:`禁用身份验证`,configureBambuddy:`配置 Bambuddy`,systemDefault:`系统默认`,archiveSettings:`归档设置`,newWindow:`新窗口`,embeddedOverlay:`嵌入式叠加层`,preferredSlicer:`首选切片软件`,preferredSlicerDescription:`通过 API 边车进行应用内切片所使用的切片软件`,openInSlicerLabel:`在切片软件中打开`,openInSlicerInherit:`与 API 切片软件相同`,openInSlicerDescription:`"在切片软件中打开"按钮使用的桌面切片软件。保持"与 API 切片软件相同"以继承设置，或选择不同的切片软件用于本地使用。`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev 存在已知 CLI 错误，无法切片许多 Bambu 创建的 3MF — 见上游 issue #12426（绘制的多挤出机文件 segfault）和 #13386（参数范围严格验证拒绝）。在上游修复发布之前，推荐使用 Bambu Studio。`,useSlicerApi:`使用切片器 API`,useSlicerApiDescription:`开启时，「切片」操作打开应用内切片器模态并调用 slicer-API sidecar。关闭时（默认），通过 URI 方案交给桌面切片器。`,slicerCard:`切片器`,orcaslicerApiUrl:`OrcaSlicer sidecar URL`,bambuStudioApiUrl:`Bambu Studio sidecar URL`,slicerStallTimeout:`切片器停滞超时（分钟）`,slicerStallTimeoutDescription:`若 sidecar 在此时长内没有任何进度，则放弃本次切片。持续报告进度的复杂模型无论耗时多久都不会被中断。不报告进度的 sidecar 则将此值作为总时长上限。`,slicerApiUrlDescription:`slicer-API sidecar 容器的 URL。留空以使用 SLICER_API_URL / BAMBU_STUDIO_API_URL 环境变量默认值。`,externalCameras:`外部摄像头`,costTracking:`成本追踪`,printsOnly:`仅打印`,totalConsumption:`总消耗`,dataManagement:`数据管理`,storageUsage:`存储使用情况`,storageUsageDescription:`按类别的数据使用情况明细`,storageUsageTotal:`总计`,storageUsageErrors:`错误`,storageUsageOtherBreakdown:`其他（包括静态资源、脚本和配置文件）`,storageUsageSystem:`系统`,storageUsageData:`数据`,storageUsageUnavailable:`存储使用信息不可用`,clearNotificationLogsDescription:`删除 30 天前的通知日志`,resetUiPreferencesDescription:`重置侧边栏顺序、主题、视图模式和布局偏好。打印机、归档和设置不受影响。`,enableHomeAssistant:`启用 Home Assistant`,enableMqtt:`启用 MQTT`,useTls:`使用 TLS`,enableMetricsEndpoint:`启用指标端点`,availableMetrics:`可用指标`,billingEnabled:`启用账单`,billingEnabledDescription:`对用户的打印进行收费并启用财务功能`,printerKillSwitch:`打印机紧急停止开关`,printerKillSwitchDescription:`立即停止未经授权的打印`,financeBudgetReset:`财务预算月度重置`,financeBudgetResetDay:`重置日期`,financeBudgetResetDayHelp:`对于少数月份,重置使用该月的最后一天。`,financeBudgetResetTimezone:`重置时区`,financeBudgetResetTimezoneHelp:`预算窗口的开始时间在此时区计算。`,rebuildLedger:`重建钱包账本`,rebuildLedgerStarted:`钱包账本重建已启动`,rebuildLedgerConfirmTitle:`重建钱包账本?`,rebuildLedgerConfirmMessage:`这将重建钱包账本以修复历史余额值。仅在您知道自己在做什么时才执行此操作。`,rebuildLedgerInProgress:`正在启动重建...`,editUser:`编辑用户`,deleteUserTitle:`删除用户`,groupName:`组名称`,leaveEmptyForAnonymous:`留空为匿名`,leaveEmptyForNoAuth:`留空为无认证`,enterNewPassword:`输入新密码`,confirmNewPassword:`确认新密码`,enterGroupName:`输入组名称`,enterDescriptionOptional:`输入描述（可选）`,enterCurrentPassword:`输入当前密码`,enterNewPasswordMin6:`输入新密码（至少 6 个字符）`,toast:{keyCopied:`密钥已复制到剪贴板`,copyFailed:`复制密钥失败`,keyAddedToBrowser:`密钥已添加到 API 浏览器`,clearLogsFailed:`清除日志失败`,uiPreferencesReset:`UI 偏好已重置。刷新中...`,authDisabled:`身份验证已成功禁用`,authDisableFailed:`禁用身份验证失败`,apiKeyCreated:`API 密钥已创建`,apiKeyDeleted:`API 密钥已删除`,userCreated:`用户创建成功`,userUpdated:`用户更新成功`,userDeleted:`用户删除成功`,groupCreated:`组创建成功`,groupUpdated:`组更新成功`,groupDeleted:`组删除成功`,fillRequiredFields:`请填写所有必填字段`,passwordsDoNotMatch:`密码不匹配`,passwordTooShort:`密码至少需要 8 个字符`,passwordNeedsUppercase:`密码必须至少包含一个大写字母`,passwordNeedsLowercase:`密码必须至少包含一个小写字母`,passwordNeedsDigit:`密码必须至少包含一个数字`,passwordNeedsSpecial:`密码必须至少包含一个特殊字符`,enterGroupName:`请输入组名称`,settingsSaved:`设置已保存`,noPermissionUpdate:`您没有权限更改设置`,cameraSettingsSaved:`摄像头设置已保存`,enterCameraUrl:`请输入摄像头 URL`,passwordChanged:`密码修改成功`,connectionFailed:`连接失败`,testFailed:`测试失败`,cameraConnected:`摄像头已连接{{resolution}}`,cameraConnectedCoalesced:`摄像头已连接{{resolution}}（与正在进行的抓取共享）`},testConnection:`测试连接`,catalog:{spoolCatalog:`耗材目录`,spoolCatalogDescription:`按品牌/类型的空耗材重量。用于添加耗材时的自动重量查找。`,searchCatalog:`搜索目录...`,addNewEntry:`添加新条目`,namePlaceholder:`名称（例如：Bambu Lab - 塑料）`,weight:`重量`,type:`类型`,default:`默认`,custom:`自定义`,noMatch:`没有条目匹配您的搜索`,empty:`目录中没有条目`,deleteEntry:`删除条目`,deleteConfirm:`确定要删除"{{name}}"吗？`,resetCatalog:`重置目录`,resetConfirm:`重置目录为默认值？这将移除所有自定义条目。`,loadFailed:`加载耗材目录失败`,nameWeightRequired:`名称和重量为必填项`,entryAdded:`条目已添加`,addFailed:`添加条目失败`,entryUpdated:`条目已更新`,updateFailed:`更新条目失败`,entryDeleted:`条目已删除`,deleteFailed:`删除条目失败`,resetSuccess:`目录已重置为默认值`,resetFailed:`重置目录失败`,exported:`已导出 {{count}} 条`,imported:`已导入 {{added}} 条（跳过 {{skipped}} 条）`,importFailed:`导入失败：无效的 JSON 格式`,exportTooltip:`导出目录为 JSON`,importTooltip:`从 JSON 导入目录`,resetTooltip:`重置为默认值`,selectedCount:`已选择 {{count}} 项`,deleteSelected:`删除所选`,bulkDeleteConfirm:`确定要删除 {{count}} 个条目吗？`,bulkDeleted:`已删除 {{count}} 个条目`,bulkDeleteFailed:`删除条目失败`,material:`材料`,spoolWeight:`线轴重量`,color:`颜色`,updateSpoolWeight:`更新线轴重量`,filamentUpdated:`耗材已更新`,filamentUpdateFailed:`更新耗材失败`,filamentUpdateInvalid:`耗材数据无效`,keepExistingSpoolWeight:`保留现有线轴的旧重量`,keepExistingSpoolWeightDesc:`已使用此耗材类型创建的线轴保留旧的皮重。新线轴使用更新后的值。`,applyToAllSpools:`应用到所有线轴`,applyToAllSpoolsDesc:`此耗材类型的所有重量计算立即使用新的皮重。`},colorCatalog:{title:`颜色目录`,description:`按制造商/材料的耗材颜色。用于添加耗材时的自动颜色查找。`,searchColors:`搜索颜色...`,allManufacturers:`所有制造商`,addNewColor:`添加新颜色`,manufacturer:`制造商`,colorName:`颜色名称`,hex:`十六进制`,materialOptional:`材料（可选）`,showing:`显示 {{filtered}} / {{total}} 种颜色`,noMatch:`没有颜色匹配您的搜索`,empty:`目录中没有颜色`,deleteColor:`删除颜色`,deleteConfirm:`确定要删除"{{name}}"吗？`,resetCatalog:`重置颜色目录`,resetConfirm:`重置目录为默认值？这将移除所有自定义颜色。`,sync:`同步`,starting:`启动中...`,syncTooltip:`从 FilamentColors.xyz 同步（2000+ 种颜色，可能需要一分钟）`,loadFailed:`加载颜色目录失败`,fieldsRequired:`制造商、颜色名称和十六进制颜色为必填项`,colorAdded:`颜色已添加`,addFailed:`添加颜色失败`,colorUpdated:`颜色已更新`,updateFailed:`更新颜色失败`,colorDeleted:`颜色已删除`,deleteFailed:`删除颜色失败`,resetSuccess:`颜色目录已重置为默认值`,resetFailed:`重置目录失败`,syncUpToDate:`已是最新（检查了 {{count}} 种颜色）`,syncComplete:`添加了 {{added}} 种新颜色（{{skipped}} 种已存在）`,syncError:`同步错误`,syncFailed:`从 FilamentColors.xyz 同步失败`,exported:`已导出 {{count}} 种颜色`,imported:`已导入 {{added}} 种颜色（跳过 {{skipped}} 种）`,importFailed:`导入失败：无效的 JSON 格式`,selectedCount:`已选择 {{count}} 项`,deleteSelected:`删除所选`,bulkDeleteConfirm:`确定要删除 {{count}} 种颜色吗？`,bulkDeleted:`已删除 {{count}} 种颜色`,bulkDeleteFailed:`删除颜色失败`},dateFormat:`日期格式`,dateFormatUs:`美式 (MM/DD/YYYY)`,dateFormatEu:`欧式 (DD/MM/YYYY)`,dateFormatIso:`ISO (YYYY-MM-DD)`,timeFormat:`时间格式`,timeFormat12:`12小时制 (3:30 PM)`,timeFormat24:`24小时制 (15:30)`,defaultPrinter:`默认打印机`,defaultPrinterDescription:`为上传、重印和其他操作预选此打印机。`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`使用侧边栏布局重新排序项目、重置可见性并管理自定义链接。`,setDefault:`设为默认`,sidebarOrderSetDefaultHint:`设为默认将当前菜单顺序应用于尚未自定义的用户。`,sidebarDefaultSet:`已设置默认菜单顺序。`,sidebarDefaultCleared:`已清除默认菜单顺序。`,sidebarDefaultFailed:`设置默认菜单顺序失败。`,reset:`重置`,darkMode:`深色模式`,lightMode:`浅色模式`,active:`(当前)`,background:`背景`,accent:`强调色`,style:`样式`,bgNeutral:`中性`,bgWarm:`暖色`,bgCool:`冷色`,bgOled:`OLED 纯黑`,bgSlate:`石板蓝`,bgForest:`森林绿`,accentGreen:`绿色`,accentTeal:`青色`,accentBlue:`蓝色`,accentOrange:`橙色`,accentPurple:`紫色`,accentRed:`红色`,styleClassic:`经典`,styleGlow:`发光`,styleVibrant:`鲜艳`,themeToggleHint:`使用侧边栏中的图标在深色、浅色和系统模式之间切换。`,progressInTitle:`在标签页显示打印进度`,progressInTitleDescription:`在浏览器标签页中显示当前打印的百分比和进度环。`,autoArchivePrints:`自动归档打印`,autoArchiveDescription:`打印完成时自动保存3MF文件`,saveThumbnailsDescription:`从3MF文件中提取并保存预览图像`,captureFinishPhotoDescription:`打印完成时从打印机摄像头拍照。Bambuddy 会在打印期间录制一段短延时摄影，以便从热床下降前的瞬间获取照片；如果您为本次打印启用了延时摄影，文件将保留，否则会在拍照完成后自动删除。`,finishPhotoRestorePlate:`为完成照片抬升热床`,finishPhotoRestorePlateDescription:`打印结束时打印机会将热床下降约 100 mm，使完成的模型落在相机取景范围之下。Bambuddy 会将热床抬回到最后一层打印高度略上方，拍摄照片后再次下降。若打印高度未知或队列中还有其他任务，则跳过此步骤。`,ffmpegNotInstalled:`未安装ffmpeg`,ffmpegRequired:`摄像头捕获需要ffmpeg。通过 <brew>brew install ffmpeg</brew>（macOS）或 <apt>apt install ffmpeg</apt>（Linux）安装。`,camera:`摄像头`,cameraViewMode:`摄像头查看模式`,cameraOverlayDescription:`摄像头在主屏幕上以可调大小的覆盖层打开`,cameraWindowDescription:`摄像头在单独的浏览器窗口中打开`,externalCamerasDescription:`配置外部摄像头以替换内置打印机摄像头。支持MJPEG流、RTSP、HTTP快照和USB摄像头（V4L2）。启用后，外部摄像头将用于实时查看和完成照片。`,cameraPlaceholderUsb:`设备路径 (/dev/video0)`,cameraPlaceholderUrl:`摄像头URL (rtsp://... 或 http://...)`,cameraTypeMjpeg:`MJPEG 流`,cameraTypeRtsp:`RTSP 流`,cameraTypeSnapshot:`HTTP 快照`,cameraTypeUsb:`USB 摄像头 (V4L2)`,cameraSnapshotUrl:`快照 URL（可选）`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`用于通知缩略图、完成照片、层延时摄影帧和打印板检测的单帧 URL。延时摄影和打印板检测各自需要自己的每打印机开关 — 此 URL 只是它们激活时拉取的图像源。留空以从上方实时流捕获。适用于 go2rtc（/api/frame.jpeg）和具有专用快照端点的 IP 摄像头。`,cameraRotation:`旋转`,test:`测试`,connected:`已连接`,disconnected:`未连接`,currency:`货币`,defaultFilamentCost:`默认耗材成本（每公斤）`,electricityCost:`每千瓦时电费`,energyDisplayMode:`能源显示模式`,energyModePrintDescription:`仪表板显示打印期间使用的能源总和`,energyModeTotalDescription:`仪表板显示智能插座的累计能源`,fileManager:`文件管理器`,createArchiveEntry:`打印时创建归档条目`,createArchiveEntryDescription:`从文件管理器打印时，可选择创建归档条目`,lowDiskSpaceWarning:`磁盘空间不足警告`,lowDiskSpaceDescription:`当可用磁盘空间低于此阈值时显示警告`,printerFirmware:`打印机固件`,checkFirmwareDescription:`检查Bambu Lab的打印机固件更新`,bambuddySoftware:`Bambuddy 软件`,autoCheckDescription:`启动时自动检查新版本`,checkNow:`立即检查`,updateAvailableVersion:`可用更新：v{{version}}`,releaseNotes:`发布说明`,updateViaDocker:`通过 Docker Compose 更新：`,composeDirectory:`Compose 目录`,composeDirectoryHint:`存放 docker-compose.yml 的目录。留空则不添加 cd。`,copyUpdateCommand:`复制更新命令`,updateViaHomeAssistant:`更新由 Home Assistant Supervisor 管理。请在 Home Assistant 中打开 设置 → 加载项 → Bambuddy 以安装新版本。`,updateViaWindowsInstaller:`Windows 安装通过重新运行安装程序来更新。请在下方下载新版本 — 您的数据、设置和打印机都会保留。`,downloadWindowsInstaller:`下载 v{{version}} 安装程序`,installUpdate:`安装更新`,latestVersionRunning:`您正在运行最新版本`,failedToCheckUpdates:`检查更新失败：{{error}}`,backupRestore:`备份与恢复`,backupRestoreDescription:`导出/导入设置并配置GitHub备份`,goToBackup:`前往备份`,externalUrl:`外部URL`,externalUrlDescription:`Bambuddy可访问的外部URL。用于通知图像和外部集成。`,bambuddyUrl:`Bambuddy URL`,externalUrlHint:`包含协议和端口（例如：http://192.168.1.100:8000）`,ftpRetry:`FTP重试`,ftpRetryDescription:`当打印机WiFi不稳定时重试FTP操作。适用于3MF下载、打印上传、延时摄影下载和固件更新。`,autoRetryDescription:`自动重试失败的FTP操作`,retryAttempts:`重试次数`,retryDelay:`重试延迟`,connectionTimeout:`连接超时`,time_one:`{{count}}次`,time_other:`{{count}}次`,second_one:`{{count}}秒`,second_other:`{{count}}秒`,nSeconds:`{{count}}秒`,increaseForWeakWifi:`对WiFi信号弱的打印机增加此值`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`连接到Home Assistant，通过HA REST API控制智能插座。支持switch、light、input_boolean和script实体。`,homeAssistantUrl:`Home Assistant URL`,longLivedAccessToken:`长期访问令牌`,haTokenHint:`在HA中创建令牌：个人资料 → 长期访问令牌 → 创建令牌`,connectionSuccessful:`连接成功`,connectionFailed:`连接失败`,haConnectionSuccess:`已成功连接到Home Assistant。`,haConnectionFailed:`连接Home Assistant失败。`,mqttPublishing:`MQTT发布`,mqttDescription:`将BamBuddy事件发布到外部MQTT代理，用于与Node-RED、Home Assistant和其他自动化系统集成。`,mqttEnableDescription:`向外部MQTT代理发布事件`,brokerHostname:`代理主机名`,port:`端口`,usernameOptional:`用户名（可选）`,passwordOptional:`密码（可选）`,topicPrefix:`主题前缀`,topicPrefixHint:`主题格式：{{prefix}}/printers/<serial>/status 等`,prometheusMetrics:`Prometheus 指标`,prometheusEndpointDescription:`在 <code>/api/v1/metrics</code> 公开打印机指标，用于Prometheus/Grafana监控。`,bearerTokenOptional:`Bearer令牌（可选）`,bearerTokenHint:`设置后，请求必须包含 <code>Authorization: Bearer <token></code>`,metricsConnectionStatus:`连接状态`,metricsPrinterState:`打印机状态（空闲/打印中等）`,metricsPrintProgress:`打印进度 0-100%`,metricsBedTemp:`热床温度`,metricsNozzleTemp:`喷嘴温度`,metricsPrintsTotal:`按结果分类的总打印数`,metricsMore:`...以及更多（层数、风扇、队列、耗材用量）`,smartPlugsDescription:`连接智能插座（Tasmota或Home Assistant）以自动化电源控制并跟踪打印机的能源使用情况。`,allOn:`全部开启`,allOff:`全部关闭`,addSmartPlug:`添加智能插座`,energySummary:`能源概要`,currentPower:`当前功率`,plugsOnline:`{{reachable}}/{{total}} 个插座在线`,today:`今天`,yesterday:`昨天`,total:`总计`,enablePlugsForSummary:`启用插座以查看能源概要`,addNotificationProvider:`添加`,systemBadge:`(系统)`,creating:`创建中...`,changing:`修改中...`,deleteUserAndItems:`删除用户及其所有项目`,deleteUserKeepItems:`删除用户，保留项目（将变为无主项目）`,ok:`确定`,twoFa:{totpTitle:`身份验证器应用 (TOTP)`,totpDesc:`使用 Google Authenticator、Aegis 或 Authy 等应用。`,emailOtpTitle:`邮件 OTP`,emailOtpDesc:`登录时向 {{email}} 发送一次性验证码。`,emailOtpNoEmail:`请先为账户添加邮箱地址以启用此方式。`,addEmailFirst:`您的账户没有邮箱地址，请联系管理员添加。`,setupTotp:`设置身份验证器应用`,setupAuthApp:`设置身份验证器应用`,setupInstructions:`使用身份验证器应用扫描二维码，然后输入验证码确认。`,manualEntry:`无法扫描？请手动输入此密钥：`,scannedContinue:`已扫描 — 继续`,enterCodeToConfirm:`请输入身份验证器应用中的6位验证码以确认设置。`,activate:`激活`,disableTotp:`停用身份验证器`,disableConfirmHint:`请输入有效的 TOTP 码或备用码来停用身份验证器。`,totpDisabled:`身份验证器应用已停用。`,emailOtpEnabled:`邮件 OTP 已启用。`,emailOtpDisabled:`邮件 OTP 已停用。`,smtpRequired:`请先配置并测试SMTP设置。`,invalidCode:`无效验证码，请重试。`,enableEmailOtp:`启用邮件 OTP`,disableEmailOtp:`停用邮件 OTP`,emailSetupEnterCode:`验证码已发送至您的邮箱地址。请在下方输入以确认您拥有此邮箱。`,verifyAndEnable:`验证并启用`,emailDisablePasswordHint:`请输入您的账户密码以确认停用邮件 OTP。`,passwordPlaceholder:`输入您的密码`,backupCodesTitle:`保存备用码`,backupCodesWarning:`请将这些码保存在安全的地方。每个码只能使用一次，且不会再次显示。`,backupCodesRemaining:`剩余 {{count}} 个备用码`,savedCodes:`已保存`,regenBackup:`重新生成备用码`,regenBackupHint:`输入当前 TOTP 码以生成 10 个新备用码，所有现有备用码将失效。`,newBackupCodes:`新备用码`,linkedAccounts:`已关联的 SSO 账户`,linkedAccountsDesc:`以下外部身份提供商已与您的账户关联。`,oidcUnlinked:`账户已解除关联。`},sessionPolicy:{title:`会话策略`,description:`新用户登录的最长会话有效期。已颁发的令牌保留其原有的过期时间。`,preset24h:`24 小时`,preset7d:`7 天`,preset30d:`30 天`,customHoursLabel:`自定义会话有效期（小时）`,hoursSuffix:`小时`,warning:`更长的会话会减弱自动注销保护。仅建议在受信任的单用户部署中使用。`},oidc:{title:`SSO / OIDC 提供商`,desc:`配置 OpenID Connect 提供商以实现单点登录。`,addProvider:`添加提供商`,newProvider:`新提供商`,empty:`尚未配置 OIDC 提供商。`,created:`提供商已创建。`,updated:`提供商已更新。`,deleted:`提供商已删除。`,refreshIcon:`刷新图标`,removeIcon:`移除图标`,iconRefreshed:`图标已刷新。`,iconRemoved:`图标已移除。`,iconFetchFailed:`无法从提供商 URL 获取图标。`,deleteTitle:`删除提供商`,deleteMessage:`删除"{{name}}"？所有关联账户将断开连接。`,form:{name:`显示名称`,issuerUrl:`颁发者 URL`,clientId:`客户端 ID`,clientSecret:`客户端密钥`,scopes:`作用域`,iconUrl:`图标 URL（可选）`,enabled:`已启用`,autoCreate:`自动创建用户`,autoCreateDesc:`首次登录时自动创建本地账户。`,autoLink:`自动关联已有账户`,autoLinkDesc:`首次登录时通过邮箱匹配现有本地账户并自动关联。`,secretHint:`留空以保留当前`,secretPlaceholder:`新密钥`,emailClaim:`邮箱声明`,emailClaimDesc:`用作邮箱身份的 JWT 声明。Azure Entra ID 请使用 'preferred_username' 或 'upn'（不发送 email_verified）。仅使用可信的声明名称。`,emailClaimPlaceholder:`邮箱`,emailClaimCustomClaimAutoLinkWarning:`自定义声明仅在值由租户管理时（例如 Azure Entra ID 的 upn / preferred_username）对自动关联安全。如果您的 IdP 允许用户自我声明此声明，请勿启用自动关联。`,requireEmailVerified:`要求邮箱已验证`,requireEmailVerifiedDesc:`仅在提供商将邮箱声明标记为已验证时才接受。`,requireEmailVerifiedWarning:`警告：将在未经验证的情况下接受邮箱。仅对受信任的提供商使用。`,requireEmailVerifiedAutoLink:`请先禁用自动关联以更改此设置。`,defaultGroup:`默认组`,defaultGroupDesc:`自动创建用户时分配的组。未设置时回退到 Viewers。`,defaultGroupViewersFallback:`Viewers（默认）`,autologin:`自动登录`,autologinDesc:`将未认证的访问者直接重定向到该提供商。只有一个提供商可以携带此标志。`}},encryption:{title:`MFA 加密状态`,enabledFromEnv:`已启用静态加密（密钥来自 MFA_ENCRYPTION_KEY 环境变量）`,enabledFromFile:`已启用静态加密（密钥从数据目录加载）`,enabledGenerated:`使用自动生成的密钥启用静态加密`,notConfigured:`未配置静态加密`,notConfiguredDesc:`TOTP 密钥和 OIDC client_secrets 以明文存储。请设置 MFA_ENCRYPTION_KEY 或使用可写数据目录重启 Bambuddy 以自动生成。`,allEncrypted:`所有 MFA 密钥均已静态加密。`,legacyRowsLabel:`旧版明文行`,encryptedRowsLabel:`已加密行`,legacyRowsWarning:`检测到 {{count}} 个旧版明文行。请重新保存 OIDC 提供商或重新注册用户的身份验证器应用，以迁移到加密存储。`,backupHint:`自动生成的密钥存储在 DATA_DIR/.mfa_encryption_key 中，并包含在本地备份 ZIP 中。请保护备份安全或显式设置 MFA_ENCRYPTION_KEY。`,decryptionBrokenTitle:`加密密钥缺失`,decryptionBrokenError:`无法解密 {{count}} 条加密记录，因为加密密钥不再可用。请恢复以前的 MFA_ENCRYPTION_KEY 或 DATA_DIR/.mfa_encryption_key 以恢复访问。`,migrationErrorWarning:`{{count}} 行旧数据在启动时未能重新加密。请检查服务器日志并重启 Bambuddy 以重试。`},pipelineLimits:{title:`切片机流水线限制`,maxCopiesLabel:`每次运行最大副本数`,maxCopiesDesc:`操作员运行流水线时可请求的副本数上限。服务器端硬性上限为 1000。`},pipelines:{title:`切片机流水线`,subtitle:`可复用的预设捆绑包（打印机 + 工艺 + 耗材 + 热床类型）。在切片对话框中保存一个，下次切片文件时一键应用。`,loading:`正在加载流水线…`,loadError:`无法加载流水线。`,confirmDelete:`删除此流水线？此操作无法撤销。`,staleWarning:`引用的一个或多个预设已不存在。请在切片对话框中重新保存此流水线以修复。`,empty:{title:`暂无流水线。`,howto:`为任意文件打开切片对话框，选择打印机 / 工艺 / 耗材 / 热床，然后点击"另存为流水线"。保存的流水线将显示在此处。`},field:{name:`流水线名称`,description:`描述`,targetPrinter:`目标打印机`,noTarget:`— 无目标 —`,targetKind:`目标类型`,targetKindSpecific:`特定打印机`,targetKindClass:`打印机类别`,targetModelClass:`打印机型号`,fanoutStrategy:`分发策略`,fanout:{max_parallel:`最大并行 — 分发到任何空闲匹配的打印机`,round_robin:`轮询 — 在合格打印机间循环`,fill_one_first:`先填一台 — 将所有副本固定到一台打印机`},fanoutShort:{max_parallel:`并行`,round_robin:`轮询`,fill_one_first:`先填一台`}},action:{save:`保存`,cancel:`取消`,rename:`重命名`,delete:`删除`},slot:{printer:`打印机`,process:`工艺`,filament:`耗材`,filamentN:`耗材 {{n}}`,filamentAll:`全部 {{n}} 个槽`,bed:`热床`},group:{profiles:`配置文件`,filaments:`耗材`},searchPlaceholder:`搜索流水线…`,filterTargetType:`按目标类型筛选`,filterTarget:`按目标筛选`,filter:{all:`全部目标`,noTarget:`未设置目标`,count:`{{shown}} / {{total}}`,noMatches:`没有流水线匹配当前筛选条件。`},toast:{saved:`流水线已保存`,saveFailed:`保存失败`,deleted:`流水线已删除`,deleteFailed:`删除失败`},noTargetHint:`设置目标打印机以运行`,noTargetWarning:`运行此流水线前请先设置目标打印机。`,runs:{lastRun:`上次运行`,status:{queued:`排队中`,slicing:`切片中`,dispatching:`发送中`,in_progress:`打印中`,completed:`已完成`,failed:`失败`,partial_failure:`部分失败`,cancelled:`已取消`}}}},notification:{printStarted:{title:`打印已开始`,body:`{{printer}}：{{filename}} 已开始打印`},printCompleted:{title:`打印已完成`,body:`{{printer}}：{{filename}} 已成功完成`},printFailed:{title:`打印失败`,body:`{{printer}}：{{filename}} 打印失败`},printStopped:{title:`打印已停止`,body:`{{printer}}：{{filename}} 已停止`},printProgress:{title:`打印进度`,body:`{{printer}}：{{filename}} 已完成 {{percent}}%`},printerOffline:{title:`打印机离线`,body:`{{printer}} 已离线`},printerError:{title:`打印机错误`,body:`{{printer}}：{{error}}`},filamentLow:{title:`耗材不足`,body:`{{printer}}：耗材即将用完`},maintenanceDue:{title:`维护到期`,body:`{{printer}}：{{items}} 需要关注`}},errors:{generic:`出了点问题`,networkError:`网络错误。请检查您的连接。`,notFound:`未找到`,unauthorized:`未授权`,serverError:`服务器错误`,validationError:`请检查您的输入`,printerConnectionFailed:`连接打印机失败`,saveFailed:`保存更改失败`,deleteFailed:`删除失败`,loadFailed:`加载数据失败`},hmsErrors:{title:`错误 - {{name}}`,noErrors:`无错误`,viewOnWiki:`在拓竹 Wiki 上查看`,mqttVerifyFailedRemedy:`在打印机上启用开发者模式，重启打印机，然后重新开始该任务。`,unknownCode:`未知 HMS 代码 — 详情请参阅拓竹 Wiki。`,clearInstructions:`在打印机上清除错误以在此处消除它们。`,clearErrors:`清除错误`,clearSuccess:`HMS 错误已清除`,clearFailed:`清除 HMS 错误失败`,actionSuccess:`已向打印机发送操作`,actionFailed:`操作发送失败`,runoutExpectedSlot:`{{ranOut}} 的耗材已用尽。打印机现在正在等待 {{expected}} 装入兼容耗材。请将料卷装入 {{expected}}，然后选择"重试"。`,runoutExpectedSlotOnly:`打印机正在等待 {{expected}} 装入兼容耗材。请在该料槽装入料卷，然后选择"重试"。`,runoutSlotUnknown:`耗材已用尽，打印已暂停。Bambuddy 无法确定打印机现在需要哪个料槽——请在打印机屏幕上查看所请求的料槽。`,actions:{RESUME_PRINTING:`恢复打印`,RESUME_PRINTING_DEFECTS:`恢复 (缺陷可接受)`,RESUME_PRINTING_PROBELM_SOLVED:`恢复 (问题已解决)`,STOP_PRINTING:`停止打印`,CHECK_ASSISTANT:`查看助手`,FILAMENT_EXTRUDED:`已挤出耗材，继续`,RETRY_FILAMENT_EXTRUDED:`尚未挤出，重试`,CONTINUE:`已完成，继续`,LOAD_VIRTUAL_TRAY:`加载耗材`,OK_BUTTON:`确定`,FILAMENT_LOAD_RESUME:`耗材已加载，恢复`,JUMP_TO_LIVEVIEW:`查看实时画面`,NO_REMINDER_NEXT_TIME:`下次不再提醒`,REFRESH_NOZZLE:`重新检查`,IGNORE_NO_REMINDER_NEXT_TIME:`忽略，下次不再提醒`,IGNORE_RESUME:`忽略并恢复`,PROBLEM_SOLVED_RESUME:`问题已解决，恢复`,TURN_OFF_FIRE_ALARM:`知道了，关闭火警`,RETRY_PROBLEM_SOLVED:`重试 (问题已解决)`,CANCLE:`取消`,STOP_DRYING:`停止干燥`,PROCEED:`继续`,OK_JUMP_RACK:`确定`,ABORT:`终止`,DISABLE_PURIFICATION:`本次打印禁用空气净化`,DONT_REMIND_NEXT_TIME:`不再提醒`,DBL_CHECK_CANCEL:`取消`,DBL_CHECK_DONE:`完成`,DBL_CHECK_RETRY:`重试`,DBL_CHECK_RESUME:`恢复`,DBL_CHECK_OK:`确认`,REMOVE_CLOSE_BTN:`关闭`}},mqttDebug:{title:`MQTT 调试日志`,searchPlaceholder:`搜索主题或负载...`,noMessages:`尚未记录消息`,startLoggingHint:`点击"开始记录"以开始捕获 MQTT 消息`,noMessagesMatch:`没有消息匹配您的筛选条件`,adjustFilterHint:`尝试调整您的搜索或筛选条件`,incoming:`传入`,outgoing:`传出`,loggingStopped:`记录已停止`,loggingActive:`记录中 - 消息将自动刷新`,startLogging:`开始记录`,stopLogging:`停止记录`,clearLog:`清除日志`,topic:`主题`,timestamp:`时间戳`,direction:`方向`,all:`全部`},printerFiles:{zipStarted_one:`已开始下载 {{count}} 个文件的 ZIP`,zipStarted_other:`已开始下载 {{count}} 个文件的 ZIP`,zipPartial:`已开始下载 ZIP，共 {{total}} 个文件中成功获取 {{successful}} 个，其余文件无法获取`,downloadFailed:`下载失败：{{error}}`,unknownError:`未知错误`,shiftSelectHint:`按住 Shift 单击以选择范围`,selectFile:`选择 {{name}}`,deselectFile:`取消选择 {{name}}`,title:`文件管理器`,storageUsed:`已用：`,storageFree:`剩余：`,filterPlaceholder:`筛选文件...`,deleteButton:`删除`,deleteFiles:`删除 {{count}} 个文件`,deleteFileConfirm:`删除"{{name}}"？此操作无法撤销。`,deleteFilesConfirm:`删除 {{count}} 个选中的文件？此操作无法撤销。`,noFiles:`打印机上没有文件`,printerUnavailable:`打印机文件服务不可用。请在打印机可访问时重试。`,loadingFiles:`加载文件中...`,failedToLoad:`加载文件失败`,toast:{filesDeleted:`已删除 {{count}} 个文件`,deleteFailed:`删除失败：{{error}}`}},confirm:{delete:`确定要删除吗？`,unsavedChanges:`您有未保存的更改。确定要离开吗？`,clearQueue:`确定要清空队列吗？`},login:{title:`Bambuddy 登录`,subtitle:`登录您的账户`,username:`用户名`,usernamePlaceholder:`输入您的用户名`,usernameOrEmail:`用户名或邮箱`,usernameOrEmailPlaceholder:`用户名或 @ 邮箱`,password:`密码`,passwordPlaceholder:`输入您的密码`,signIn:`登录`,signingIn:`登录中...`,rememberMe:`记住我`,forgotPassword:`忘记密码？`,autologinFailed:`自动SSO登录失败。请在下方选择一个提供商以继续。`,localDisabledNotice:`本地登录已禁用。请使用下方的SSO提供商之一。`,loginSuccess:`登录成功`,loginFailed:`登录失败`,enterCredentials:`请输入用户名和密码`,enterEmail:`请输入您的电子邮件地址`,oidcLoginFailed:`OIDC 登录失败`,oidcErrors:{providerError:`身份提供商返回了一个错误`,missingParameters:`OIDC 回调缺少必要参数`,invalidState:`OIDC 状态无效或已被使用`,stateExpired:`OIDC 登录会话已过期，请重试`,providerNotFound:`未找到 OIDC 提供商`,discoveryFailed:`无法获取 OIDC 发现文档`,invalidDiscovery:`OIDC 发现文档无效`,networkError:`OIDC 令牌交换时出现网络错误`,badResponse:`OIDC 令牌交换时收到意外响应`,noIdToken:`OIDC 提供商未返回 ID 令牌`,validationFailed:`OIDC 令牌验证失败`,nonceMismatch:`OIDC nonce 不匹配，可能存在重放攻击`,missingSubClaim:`OIDC 令牌缺少 sub 声明`,noLinkedAccount:`没有与此 OIDC 身份关联的本地帐户`,accountInactive:`您的帐户已被停用`,userResolutionFailed:`无法解析您的帐户`,internalError:`OIDC 登录过程中发生内部错误`,tokenExchangeFailed:`OIDC 令牌交换失败`},forgotPasswordTitle:`忘记密码`,forgotPasswordMessage:`如果您忘记了密码，请联系系统管理员进行重置。`,forgotPasswordEmailMessage:`输入您的邮箱地址，我们将向您发送新密码。`,emailAddress:`邮箱地址`,emailPlaceholder:`your.email@example.com`,cancel:`取消`,sending:`发送中...`,sendResetEmail:`发送重置邮件`,howToReset:`如何重置密码：`,resetStep1:`联系您的 Bambuddy 管理员`,resetStep2:`请他们在用户管理中重置您的密码`,resetStep3:`他们可以为您设置一个临时密码`,resetStep4:`使用新密码登录并在设置中修改密码`,gotIt:`知道了`,resetPassword:{title:`设置新密码`,subtitle:`请在下方输入并确认您的新密码。`,newPassword:`新密码`,newPasswordPlaceholder:`至少 8 个字符`,confirmPassword:`确认密码`,confirmPasswordPlaceholder:`重复输入新密码`,saving:`保存中…`,submit:`设置新密码`,backToLogin:`返回登录`,passwordsDoNotMatch:`密码不匹配`,passwordTooShort:`密码至少需要 8 个字符`,resetFailed:`密码重置失败。链接可能已过期。`},twoFA:{title:`两步验证`,subtitle:`您的账户已启用两步验证。请在下方输入验证码。`,methodAuthenticator:`身份验证器应用`,methodEmail:`邮箱验证码`,methodBackup:`备用恢复码`,instructionsTotp:`请打开您的身份验证器应用，输入 Bambuddy 的 6 位验证码。`,instructionsEmail:`6 位验证码已发送至您的邮箱，有效期为 10 分钟。`,instructionsEmailNotSent:`点击下方按钮，通过邮件获取验证码。`,instructionsBackup:`请输入您的一个 8 位备用恢复码。每个恢复码只能使用一次。`,sendCodeButton:`发送邮箱验证码`,sendingCode:`发送中...`,resendCode:`重新发送验证码`,codeLabel:`验证码`,backupCodeLabel:`备用恢复码`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`验证`,verifyingButton:`验证中...`,backToLogin:`← 返回登录页面`,orContinueWith:`或通过以下方式登录`,signInWith:`使用 {{provider}} 登录`,enterCode:`请输入验证码`,sendCodeFailed:`验证码发送失败`,invalidCode:`无效验证码，请重试。`}},setup:{title:`Bambuddy 设置`,subtitle:`为您的 Bambuddy 实例配置身份验证`,enableAuth:`启用身份验证`,adminAccount:`管理员账户`,adminAccountDesc:`如果管理员用户已存在，将使用现有管理员账户启用身份验证。如需使用现有管理员，请将下方字段留空，或输入新凭据创建新管理员用户。`,adminUsername:`管理员用户名`,adminPassword:`管理员密码`,optionalIfAdminExists:`（如管理员用户已存在则为可选）`,adminUsernamePlaceholder:`输入管理员用户名（可选）`,adminPasswordPlaceholder:`输入管理员密码（可选）`,confirmPassword:`确认密码`,confirmPasswordPlaceholder:`确认管理员密码`,settingUp:`设置中...`,completeSetup:`完成设置`,toast:{authEnabledAdminCreated:`身份验证已启用并创建了管理员用户`,authEnabledExistingAdmins:`使用现有管理员用户启用了身份验证`,setupCompleted:`设置完成`,enterBothCredentials:`请输入管理员用户名和密码，或将两者留空以使用现有管理员用户`,passwordsDoNotMatch:`密码不匹配`,passwordTooShort:`密码至少需要 6 个字符`}},changePassword:{title:`修改密码`,currentPassword:`当前密码`,currentPasswordPlaceholder:`输入当前密码`,newPassword:`新密码`,newPasswordPlaceholder:`输入新密码（至少 6 个字符）`,confirmPassword:`确认新密码`,confirmPasswordPlaceholder:`确认新密码`,passwordsDoNotMatch:`密码不匹配`,passwordTooShort:`密码至少需要 6 个字符`,changing:`修改中...`,success:`密码修改成功`,failed:`密码修改失败`},plateAlert:{title:`打印已暂停！`,message:`在构建板上检测到物体。打印已自动暂停。请清理打印板并继续打印。`,understand:`我知道了`},camera:{title:`摄像头视图`,invalidPrinterId:`无效的打印机 ID`,live:`实时`,snapshot:`快照`,restartStream:`重启流`,refreshSnapshot:`刷新快照`,fullscreen:`全屏`,exitFullscreen:`退出全屏`,connectingToCamera:`连接摄像头中...`,capturingSnapshot:`拍摄快照中...`,connectionLost:`连接已断开`,connectionFailed:`摄像头连接失败`,reconnecting:`{{countdown}} 秒后重新连接...（第 {{attempt}}/{{max}} 次尝试）`,reconnectNow:`立即重新连接`,cameraUnavailable:`摄像头不可用`,cameraUnavailableDesc:`请确保打印机已通电并已连接。`,noCamera:`无可用摄像头`,retry:`重试`,cameraStream:`摄像头流`,zoomOut:`缩小`,zoomIn:`放大`,resetZoom:`重置缩放`,recording:`录制中`,startRecording:`开始录制`,stopRecording:`停止录制`,chamberLight:`切换腔室灯`,unavailable:`摄像头不可用`,diagnose:{button:`诊断`,modalTitle:`摄像头诊断`,running:`正在运行诊断...`,runFailed:`无法运行诊断: {{error}}`,retry:`重新运行`,stage:{tcp_reachable:`网络可达性`,first_frame:`画面捕获`,live_stream_active:`直播流正在进行`},summary:{all_ok:`摄像头工作正常。诊断已成功完成所有阶段。`,live_stream_active_healthy:`摄像头正在传输最新画面 — 无需测试。`,printer_unreachable:`无法访问打印机。请检查 IP 地址、网络连接以及打印机是否已开机。`,camera_port_closed:`打印机可访问，但摄像头端口已关闭。请确保打印机设置中已启用仅 LAN 模式和开发者模式。`,no_frame:`已连接到摄像头，但未收到画面。请重试或检查打印机设置中摄像头是否已启用。`,unknown_failure:`摄像头诊断因未知原因失败。请查看支持日志了解详情。`},meta:{protocol:`协议`,port:`端口`,profile:`配置`}}},groups:{title:`组管理`,subtitle:`管理访问控制的权限组`,backToSettings:`返回设置`,createGroup:`创建组`,noPermission:`您没有访问此页面的权限。`,system:`系统`,noDescription:`无描述`,usersCount:`{{count}} 个用户`,permissionsCount:`{{count}} 个权限`,edit:`编辑`,delete:`删除`,toast:{created:`组创建成功`,updated:`组更新成功`,deleted:`组删除成功`,enterGroupName:`请输入组名称`},modal:{editGroup:`编辑组`,createGroup:`创建组`,cancel:`取消`,saving:`保存中...`,creating:`创建中...`,saveChanges:`保存更改`},form:{groupName:`组名称`,groupNamePlaceholder:`输入组名称`,systemGroupWarning:`系统组名称不可更改`,description:`描述`,descriptionPlaceholder:`输入描述（可选）`,permissions:`权限（已选 {{count}} 个）`},deleteModal:{title:`删除组`,message:`确定要删除此组吗？此组中的用户将失去这些权限。`,confirm:`删除组`},editor:{title:`编辑组`,createTitle:`创建组`,search:`搜索权限...`,selectAll:`全选`,clearAll:`清除全部`,permissionsSelected:`已选 {{count}} 个`,noResults:`没有权限匹配您的搜索`,websocketHint:`实时更新所需。缺少此权限时，界面将回退到定期轮询。`}},users:{title:`用户管理`,subtitle:`管理用户及其对 Bambuddy 实例的访问`,backToSettings:`返回设置`,createUser:`创建用户`,noPermission:`您没有访问此页面的权限。`,admin:`管理员`,noGroups:`无组`,active:`活跃`,inactive:`非活跃`,edit:`编辑`,delete:`删除`,system:`系统`,noGroupsAvailable:`无可用组`,table:{username:`用户名`,groups:`组`,status:`状态`,actions:`操作`},toast:{created:`用户创建成功`,updated:`用户更新成功`,deleted:`用户删除成功`,fillRequired:`请填写所有必填字段`,passwordsDoNotMatch:`密码不匹配`,passwordTooShort:`密码至少需要 6 个字符`,ldapProvisioned:`已创建 LDAP 用户「{{username}}」`},modal:{createUser:`创建用户`,editUser:`编辑用户`,cancel:`取消`,creating:`创建中...`,saving:`保存中...`,saveChanges:`保存更改`,advancedAuthSubtitle:`使用高级认证`,tabsAriaLabel:`用户来源`,localTab:`本地`,ldapTab:`LDAP`,ldapSearchLabel:`搜索目录`,ldapSearchPlaceholder:`输入用户名、姓名或电子邮件...`,ldapMinChars:`输入至少 2 个字符以搜索`,ldapTypeToSearch:`开始输入以搜索 LDAP 目录`,ldapSearching:`搜索目录中...`,ldapNoResults:`目录中没有匹配的用户`,ldapSearchError:`目录搜索失败。请检查 LDAP 服务器状态。`,ldapAlreadyProvisioned:`已创建`,ldapSelectedLabel:`已选`,ldapProvision:`创建用户`,ldapProvisioning:`创建中...`,ldapErrorProvision:`创建失败。请检查 LDAP 服务器状态后重试。`},form:{username:`用户名`,usernamePlaceholder:`输入用户名`,email:`邮箱`,emailPlaceholder:`user@example.com`,password:`密码`,passwordPlaceholder:`输入密码`,confirmPassword:`确认密码`,confirmPasswordPlaceholder:`确认密码`,newPasswordPlaceholder:`输入新密码`,confirmNewPasswordPlaceholder:`确认新密码`,leaveBlankToKeep:`留空以保持当前值`,groups:`组`,optional:`可选`,autoGeneratedPassword:`将自动生成安全密码并通过邮件发送给用户。`,passwordManagedByAdvancedAuth:`密码由高级认证管理。使用"重置密码"通过邮件向用户发送新密码。`,resetPassword:`重置密码`,resettingPassword:`重置密码中...`},deleteModal:{title:`删除用户`,message:`确定要删除此用户吗？此操作无法撤销。`,confirm:`删除用户`}},streamOverlay:{title:`流叠加层`,invalidPrinterId:`无效的打印机 ID`,cameraStream:`摄像头流`,progress:`进度`,eta:`预计完成时间`,printerIdle:`打印机空闲`,printerOffline:`打印机离线`,builder:{title:`直播叠加层`,description:`生成直播叠加层的网址：全屏摄像头画面上叠加实时打印信息，可用于 OBS、墙面显示屏或任何浏览器源。选择需要的字段并复制网址。`,printer:`打印机`,size:`文字大小`,sizeSmall:`小`,sizeMedium:`中`,sizeLarge:`大`,fps:`帧率`,fpsHint:`无论设置多少，A1 和 P1 的摄像头最高约为每秒 5 帧。`,token:`直播叠加层令牌（可选）`,tokenHint:`仅在启用登录时需要：OBS 没有自己的登录会话。请在上方以直播叠加层范围创建一个。`,tokenWarning:`此网址包含令牌：任何能看到它的人都可以观看画面并看到文件名。撤销令牌即可切断访问。`,fields:`要显示的字段`,fieldPrinter:`打印机名称`,fieldFilename:`文件名`,fieldStatus:`状态`,fieldProgress:`进度条`,fieldLayers:`层数`,fieldEta:`剩余时间和预计完成时间`,fieldCamera:`摄像头画面`,chamberHint:`仅在配有真实腔体传感器的机型上显示腔体温度：P1 和 A1 上报的数值没有意义，因此不显示。`,urlTitle:`叠加层网址`,open:`打开`,showPreview:`显示预览`,hidePreview:`隐藏预览`,previewTitle:`叠加层预览`},status:{printing:`打印中`,paused:`已暂停`,finished:`已完成`,failed:`失败`,idle:`空闲`,unknown:`未知`}},profiles:{title:`配置文件`,subtitle:`管理您的切片预设和压力推进校准`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`本地配置文件`,kprofiles:`K 值配置`},orcaCloud:{connectedAs:`已连接`,connectedShort:`已连接到 Orca Cloud`,logout:`断开连接`,noLogoutPermission:`您没有断开连接的权限`,noConnectPermission:`您没有连接到 Orca Cloud 的权限`,retry:`重试`,connectButton:`连接 Orca Cloud`,connect:{title:`连接到 Orca Cloud`,description:`登录您的 Orca Cloud 账户,将切片机配置同步到 Bambuddy。`},device:{title:`在 Orca Cloud 中批准 Bambuddy`,instruction:`打开 Orca Cloud 并批准此代码。批准后 Bambuddy 会自动连接。`,codeLabel:`您的配对代码`,openButton:`打开 Orca Cloud 批准页面`,manualHint:`或前往 {{url}} 并输入上方的代码。`,waiting:`正在等待您批准…`,cancel:`取消`},profiles:{title:`您的 Orca Cloud 配置文件 ({{count}})`,refresh:`刷新`,empty:`您的 Orca Cloud 账户中尚无配置文件。`},toast:{disconnected:`已从 Orca Cloud 断开连接`},errors:{startFailed:`无法启动 Orca Cloud 登录流程。`,denied:`配对在 Orca Cloud 中被拒绝。`,expired:`配对代码已过期。请点击"连接"重试。`,pollFailed:`等待批准时连接中断。请重试。`}},localProfiles:{title:`本地配置文件`,subtitle:`从 OrcaSlicer 导入和管理切片预设`,import:`导入配置文件`,importDesc:`将 .bbscfg、.bbsflmt、.orca_filament、.zip 或 .json 文件拖放到此处`,importing:`导入中...`,search:`搜索本地预设...`,noPresets:`暂无本地预设`,noSearchResults:`没有与搜索匹配的预设`,badge:`本地`,edit:`编辑`,delete:`删除`,cancel:`取消`,deleteConfirmTitle:`删除预设`,deleteConfirm:`确定要删除此预设吗？此操作无法撤销。`,source:`来源`,inheritsFrom:`继承自`,filamentType:`类型`,vendor:`厂商`,compatiblePrinters:`兼容打印机`,nozzleTemp:`喷嘴温度`,cost:`成本`,density:`密度`,pressureAdvance:`压力推进`,filament:`耗材`,process:`工艺`,printer:`打印机`,toast:{importSuccess:`已导入 {{count}} 个预设`,importSkipped:`跳过 {{count}} 个预设（重复）`,importError:`导入时出现 {{count}} 个错误`,deleted:`预设已删除`,updated:`预设已更新`}},connectedAs:`已连接为`,signInExpiredTitle:`Bambu Cloud 登录已过期`,signInExpiredBody:`Bambu Lab 不再接受已保存的令牌。请重新登录以恢复云配置文件、MakerWorld 导入和固件检查。`,logout:`退出登录`,noLogoutPermission:`您没有退出登录的权限`,failedToLoad:`加载配置文件失败`,retry:`重试`,time:{justNow:`刚刚`,minsAgo:`{{count}} 分钟前`,hoursAgo:`{{count}} 小时前`,daysAgo:`{{count}} 天前`},toast:{loggedOut:`已退出登录`},login:{title:`连接到拓竹云`,subtitle:`跨设备同步您的切片预设`,email:`邮箱`,password:`密码`,region:`地区`,regionGlobal:`全球`,regionChina:`中国`,verificationCode:`验证码`,totpCode:`验证器代码`,checkEmail:`检查您的邮箱 ({{email}}) 获取 6 位验证码`,enterTotpHint:`输入验证器应用中的 6 位代码`,accessToken:`访问令牌`,accessTokenHint:`粘贴您的拓竹云访问令牌。中国大陆账号（绑定手机号、无邮箱登录）只能使用此方式登录。可从 MakerWorld 浏览器 Cookie 中获取令牌，详见 Wiki。`,back:`返回`,loginButton:`登录`,verifyButton:`验证`,setTokenButton:`设置令牌`,useToken:`改用访问令牌`,captchaTitle:`Bambu Cloud 要求进行 CAPTCHA 验证`,captchaBody:`Bambu 在接受登录之前要求你的网络通过 CAPTCHA 验证，而该验证无法在 Bambuddy 中完成。这与你的邮箱和密码无关。限制与你的公网 IP 地址绑定，通常几小时后会自动解除；反复重试只会延长限制。若要立即登录，请改用从浏览器会话中获取的访问令牌。`,useEmail:`改用邮箱登录`,toast:{loggedIn:`登录成功`,codeSent:`验证码已发送到您的邮箱`,enterTotp:`输入验证器应用中的代码`,tokenSet:`令牌设置成功`}},presets:{myPreset:`我的预设（可编辑）`,duplicate:`复制`,editable:`可编辑`,failedToLoadDetails:`加载预设详情失败`,deleteConfirm:`删除此预设？`,deleteWarning:`这将从拓竹云中永久删除"{{name}}"。此操作无法撤销。`,noDuplicatePermission:`您没有复制预设的权限`,noEditPermission:`您没有编辑预设的权限`,noDeletePermission:`您没有删除预设的权限`,types:{filament:`耗材预设`,printer:`打印机预设`,process:`工艺预设`},toast:{deleted:`预设已删除`,created:`预设已创建`,updated:`预设已更新`,duplicated:`预设已复制`,fieldAdded:`字段"{{key}}"已添加`,exported:`预设已导出`},baseLabel:`基础：{{name}}`,currentLabel:`当前：{{name}}`,newPreset:`新建预设`,editPreset:`编辑预设`,duplicatePreset:`复制预设`,createNewPreset:`创建新预设`,customizeSettings:`自定义新预设的设置`,compareWithBase:`与基础预设比较`,compare:`比较`,basePreset:`基础预设`,selectBasePreset:`选择基础预设...`,presetName:`预设名称`,myCustomPreset:`我的自定义预设`,inheritsFrom:`继承自`,dropJsonToImport:`拖放 JSON 以导入`,tabs:{common:`常用`,allFields:`所有字段`},availableFields:`可用字段`,searchFieldsPlaceholder:`搜索字段...`,noMatchingFields:`没有匹配的字段`,allFieldsAdded:`所有字段已添加`,addCustomField:`添加自定义字段`,yourOverrides:`您的覆盖值`,noOverridesYet:`暂无覆盖值`,clickFieldsToAdd:`点击左侧的字段进行添加`,saveAsTemplate:`保存为模板`,jsonTip:`提示：将 .json 文件拖放到此对话框的任意位置以导入设置`},cloudView:{searchPlaceholder:`搜索预设...`,templates:`模板`,refresh:`刷新`,newPreset:`新建预设`,clearFilters:`清除筛选`,compareMode:`比较模式`,selectAnotherPreset:`选择另一个 {{type}} 预设`,clickTwoPresets:`点击两个相同类型的预设进行比较`,selectFirst:`1. 选择第一个`,selectSecond:`2. 选择第二个`,compareNow:`立即比较`,lastSynced:`上次同步：`,showingCount:`显示 {{showing}} / {{total}} 个预设`,noPresetsFound:`未找到预设`,columns:{filament:`耗材`,process:`工艺`,printer:`打印机`},noFilamentPresets:`无耗材预设`,noProcessPresets:`无工艺预设`,noPrinterPresets:`无打印机预设`,filters:{type:`类型`,owner:`所有者`,printer:`打印机`,nozzle:`喷嘴`,filament:`耗材`,layer:`层`,all:`全部`,myPresets:`我的预设`,builtIn:`内置`,process:`工艺`},noTemplatesPermission:`您没有管理模板的权限`,noRefreshPermission:`您没有刷新配置文件的权限`,noCreatePermission:`您没有创建预设的权限`},templates:{title:`快速模板`,noTemplates:`暂无模板`,createFirst:`从预设编辑器创建模板`,typeFilter:`类型：`,deleteTitle:`删除模板`,deleteWarning:`此操作无法撤销`,deleteConfirm:`确定要删除"{{name}}"吗？`,namePlaceholder:`模板名称`,descriptionPlaceholder:`描述`,settingsJson:`设置 (JSON)`,fieldsCount:`{{count}} 个字段`,shownInModals:`在对话框中显示`,hiddenInModals:`在对话框中隐藏`,apply:`应用`,toast:{deleted:`模板已删除`,updated:`模板已更新`,created:`模板已创建`,applied:`模板已应用`}}},support:{debugLoggingActive:`调试日志记录已激活`,manageLogs:`管理`,collectItem7:`打印机连接和固件版本`,collectItem8:`集成状态（Spoolman、MQTT、HA）`,collectItem9:`网络接口（仅子网）`,collectItem10:`Python 包版本`,collectItem11:`数据库健康检查`,collectItem12:`Docker 环境详情`,bundleGenerating:`正在生成包...`,bundleStepConnection:`正在执行打印机连接性检查`,bundleStepVirtualPrinters:`正在执行虚拟打印机设置检查`,bundleStepLogScan:`正在扫描最近的日志以查找已知问题`,bundleStepBuild:`正在构建支持包 ZIP 文件`},fileManager:{variants:{badge:`{{count}} 个版本`,groupAction:`归为版本组`,groupTooltip:`将这些文件标记为针对不同打印机切片的同一任务`,grouped:`已将 {{count}} 个文件归为版本组`,printAlternatives:`打印（{{count}} 个备选）`},title:`文件管理器`,subtitle:`组织和管理您的打印文件`,uploadFiles:`上传文件`,newFolder:`新建文件夹`,folderName:`文件夹名称`,folderNamePlaceholder:`例如：功能零件`,renameFile:`重命名文件`,renameFolder:`重命名文件夹`,invalidFilenameChar:`打印文件名中不允许使用字符 "{{char}}"。打印机 SD 卡拒绝以下字符: < > : " / \\ | ? *`,moveFiles:`移动 {{count}} 个文件`,rootNoFolder:`根目录（无文件夹）`,current:`当前`,linkFolder:`链接文件夹`,linkFolderDescription:`将"{{name}}"链接到项目或归档以便快速访问。`,project:`项目`,archive:`归档`,noProjectsFound:`未找到项目`,noArchivesFound:`未找到归档`,unlink:`取消链接`,link:`链接`,dragDropFiles:`将文件拖放到此处`,dropFilesHere:`将文件放在此处`,releaseToUpload:`释放以上传`,orClickToBrowse:`或点击浏览`,allFileTypesSupported:`支持所有文件类型。ZIP 文件将被解压。`,zipFilesDetected:`检测到 ZIP 文件`,zipExtractOptions:`ZIP 文件将被解压。选择如何处理文件夹结构：`,preserveZipStructure:`保留 ZIP 中的文件夹结构`,createFolderFromZip:`从 ZIP 文件名创建文件夹`,stlThumbnailGeneration:`STL 缩略图生成`,zipMayContainStl:`ZIP 文件可能包含 STL 文件。可以在解压时生成缩略图。`,thumbnailsCanBeGenerated:`可以为 STL 文件生成缩略图。大型模型可能需要更长时间处理。`,generateThumbnailsForStl:`为 STL 文件生成缩略图`,threemfDetected:`检测到 3MF 文件`,threemfExtractionInfo:`将自动从 3MF 文件中提取打印机型号、材料、颜色和打印设置。`,willBeExtracted:`将被解压`,filesExtracted:`已解压 {{count}} 个文件`,uploadComplete:`上传完成：{{succeeded}} 个成功`,uploadFailed:`上传失败`,zipFilesFailed:`{{count}} 个文件失败`,uploading:`上传中...`,changeLink:`更改链接...`,linkTo:`链接到...`,linkToProjectOrArchive:`链接到项目或归档`,generateThumbnail:`生成缩略图`,generateThumbnails:`生成缩略图`,generateThumbnailsForMissing:`为缺少缩略图的 STL 文件生成缩略图`,gridView:`网格视图`,listView:`列表视图`,lowDiskSpaceWarning:`磁盘空间不足警告`,lowDiskSpaceDetails:`仅剩 {{free}}（总共 {{total}}）。阈值设置为 {{threshold}} GB。`,files:`文件`,folders:`文件夹`,size:`大小`,free:`剩余`,allFiles:`所有文件`,allExternal:`外部`,externalIsEmpty:`没有外部文件`,externalEmptyDescription:`关联的外部文件夹中的文件将在此显示。`,wrap:`换行`,enableTextWrapping:`启用文本换行`,disableTextWrapping:`禁用文本换行`,collapse:`折叠`,collapseFoldersByDefault:`默认折叠文件夹`,expandFoldersByDefault:`默认展开文件夹`,folderSort:`文件夹排序`,folderSortByName:`按名称`,folderSortByActivity:`按最近活动`,dragToResizeTooltip:`拖动调整大小，双击重置`,searchFiles:`搜索文件...`,searchSubfoldersHint:`包含子文件夹`,readme:{truncated:`已截断`,show:`显示 README`,hide:`隐藏 README`,label:`README`},tags:{title:`标签`,subtitle:`为文件添加跨目录的标签 —— 玩具、儿童安全、仅 PETG 等等。`,manage:`标签`,manageTitle:`管理标签目录`,add:`新建标签`,edit:`重命名标签`,name:`名称`,fileCount:`文件数`,empty:`还没有标签。创建一个开始为文件加标签吧。`,noMatches:`没有匹配的标签。`,createPlaceholder:`例：玩具、儿童安全、petg`,createButton:`创建`,nameRequired:`名称是必填项。`,searchPlaceholder:`过滤标签…`,created:`已创建标签。`,updated:`已重命名标签。`,deleted:`已删除标签。`,saveFailed:`无法保存标签。`,deleteFailed:`无法删除标签。`,applyFailed:`无法应用标签。`,applyAdd:`添加标签`,applyRemove:`移除标签`,applyAddSuccess:`已为 {{files}} 个文件添加 {{count}} 个标签。`,applyRemoveSuccess:`已从 {{files}} 个文件移除 {{count}} 个标签。`,actionAdd:`添加到所选文件`,actionRemove:`从所选文件移除`,tagAction:`标签`,bulkTitle:`为所选的 {{count}} 个文件加标签`,bulkTooltip:`在每个所选文件上添加或移除标签。`,noPermission:`您没有为文件加标签的权限。`,filterLabel:`筛选条件：`,clearAll:`全部清除`,confirmDelete:`删除标签 "{{name}}"？`,confirmDeleteMessage:`此操作会从目录中删除该标签。文件保留其它标签。`,confirmDeleteInUseMessage:`此标签存在于 {{count}} 个文件上。删除后所有文件上的标签都会消失，但文件本身不会动。`,editAria:`编辑 {{name}}`,deleteAria:`删除 {{name}}`},allTypes:`所有类型`,prints:`打印`,ascending:`升序`,descending:`降序`,showModified:`显示修改日期`,hideModified:`隐藏修改日期`,lastModified:`最后修改`,lastActivity:`最近活动`,resultsCount:`{{showing}} / {{total}} 个文件`,selectAll:`全选`,deselectAll:`取消全选`,selected:`已选择 {{count}} 个`,adding:`添加中...`,loadingFiles:`加载文件中...`,folderIsEmpty:`文件夹为空`,noFilesYet:`暂无文件`,folderEmptyDescription:`上传文件或将文件移入此文件夹以开始使用。`,noFilesDescription:`上传文件以开始组织您的打印相关文件。`,noMatchingFiles:`没有匹配的文件`,noMatchingFilesDescription:`没有文件匹配您当前的搜索或筛选条件。`,clearFilters:`清除筛选`,printedCount:`已打印 {{count}} 次`,uploadedBy:`上传者`,deleteFolder:`删除文件夹`,deleteFile:`删除文件`,deleteFilesCount:`删除 {{count}} 个文件`,deleteFolderConfirm:`确定要删除此文件夹吗？其中的所有文件也将被删除。`,deleteFileConfirm:`确定要删除此文件吗？`,deleteFilesConfirm:`确定要删除 {{count}} 个选中的文件吗？此操作无法撤销。`,deleting:`删除中...`,noPermissionRenameFolder:`您没有重命名文件夹的权限`,noPermissionLinkFolder:`您没有链接文件夹的权限`,noPermissionDeleteFolder:`您没有删除文件夹的权限`,onlyEmptyFoldersDeletable:`您只能删除空文件夹`,noPermissionPrint:`您没有打印的权限`,noPermissionSlice:`您没有切片文件的权限`,noPermissionAddToQueue:`您没有添加到队列的权限`,noPermissionDownload:`您没有下载文件的权限`,noPermissionPreview:`您没有预览文件的权限`,preview3d:`3D 预览`,noPermissionRenameFile:`您没有重命名此文件的权限`,noPermissionGenerateThumbnail:`您没有生成缩略图的权限`,noPermissionDeleteFile:`您没有删除此文件的权限`,noPermissionCreateFolder:`您没有创建文件夹的权限`,noPermissionUpload:`您没有上传文件的权限`,noPermissionMoveFiles:`您没有移动文件的权限`,noPermissionDeleteFiles:`您没有删除文件的权限`,linkExternal:`链接外部`,linkExternalFolder:`链接外部文件夹`,linkExternalFolderDescription:`将主机目录（NAS、USB、网络共享）挂载到文件管理器中。文件不会被复制——直接从原始路径访问。`,externalFolderNamePlaceholder:`例如：NAS打印文件`,externalPath:`主机路径`,externalPathHelp:`Docker主机上目录的绝对路径。必须以绑定挂载方式挂载到容器中。`,readOnly:`只读`,readOnlyHelp:`防止上传和删除`,showHiddenFiles:`显示隐藏文件（点文件）`,externalFolder:`外部文件夹`,scanFolder:`扫描`,toast:{folderCreated:`文件夹已创建`,openInSlicerFailed:`无法在切片软件中打开`,folderDeleted:`文件夹已删除`,fileDeleted:`文件已删除`,filesDeleted:`已删除 {{count}} 个文件`,filesMoved:`文件已移动`,folderLinked:`文件夹已链接`,folderUnlinked:`文件夹已取消链接`,externalFolderLinked:`外部文件夹已链接并扫描`,folderScanned:`扫描完成：添加 {{added}} 个，移除 {{removed}} 个`,addedToQueue:`已将 {{count}} 个文件添加到队列`,addedToQueuePartial:`已添加 {{added}} 个文件，{{failed}} 个失败`,failedToAddToQueue:`添加文件失败：{{error}}`,fileRenamed:`文件已重命名`,folderRenamed:`文件夹已重命名`,thumbnailsGenerated:`已生成 {{count}} 个缩略图`,thumbnailsGeneratedPartial:`已生成 {{succeeded}} 个缩略图，{{failed}} 个失败`,noStlMissingThumbnails:`没有缺少缩略图的 STL 文件`,failedToGenerateThumbnails:`生成缩略图失败：{{error}}`,thumbnailGenerated:`缩略图已生成`,failedToGenerateThumbnail:`生成缩略图失败：{{error}}`}},projects:{parentLabel:`父项目`,parentNone:`无（顶级项目）`,parentHint:`将此项目嵌套在另一个项目下，其数据将汇总到主项目中`,partOf:`属于 {{name}}`,subProjectCount:`{{count}} 个子项目`,subProjectsOf:`{{name}} 的子项目`,collapseSubProjects:`折叠子项目`,expandSubProjects:`展开子项目`,title:`项目`,subtitle:`组织和跟踪您的 3D 打印项目`,newProject:`新建项目`,editProject:`编辑项目`,deleteProject:`删除项目`,projectName:`项目名称`,description:`描述`,noProjects:`暂无项目`,noProjectsFiltered:`没有{{status}}项目`,noProjectsFilteredHelp:`您没有任何{{status}}项目。当项目状态更改时，它们将出现在这里。`,createFirst:`创建您的第一个项目以开始组织相关打印、跟踪进度和管理构建。`,createFirstButton:`创建您的第一个项目`,create:`创建`,files:`文件`,prints:`打印`,plates:`板`,parts:`零件`,lastModified:`最后修改`,deleteConfirm:`确定要删除此项目吗？归档和队列项目将被取消链接但不会被删除。`,addFiles:`添加文件`,removeFile:`移除文件`,viewDetails:`查看详情`,namePlaceholder:`例如：Voron 2.4 构建`,descriptionPlaceholder:`可选描述...`,urlLabel:`网址`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`网址必须以 http:// 或 https:// 开头`,openExternalUrl:`打开项目网址`,coverImageLabel:`封面图片`,coverImageAlt:`项目封面图片`,coverImageUpload:`上传`,coverImageReplace:`替换`,coverImageRemove:`移除`,color:`颜色`,targetPlates:`目标板数`,targetPlatesPlaceholder:`例如：25`,targetPlatesHelp:`打印任务数量`,targetParts:`目标零件数`,targetPartsPlaceholder:`例如：150`,targetPartsHelp:`所需零件总数`,targetSets:`每个文件的份数`,targetSetsPlaceholder:`例如 10`,targetSetsHelp:`每个可打印文件需要打印的次数`,tagsLabel:`标签（逗号分隔）`,tagsPlaceholder:`例如：voron、功能件、礼物`,dueDate:`截止日期`,priority:`优先级`,priorityLow:`低`,priorityNormal:`普通`,priorityHigh:`高`,priorityUrgent:`紧急`,statusActive:`进行中`,statusCompleted:`已完成`,statusArchived:`已归档`,done:`完成`,completed:`已完成`,failed:`失败`,inQueue:`队列中`,noPrintsYet:`暂无打印`,printJobs:`打印任务（板）`,partsPrinted:`已打印零件`,failedParts:`失败零件`,import:`导入`,export:`导出`,importProject:`导入项目`,exportAll:`导出所有项目`,loading:`加载项目中...`,noEditPermission:`您没有编辑项目的权限`,noDeletePermission:`您没有删除项目的权限`,noCreatePermission:`您没有创建项目的权限`,noImportPermission:`您没有导入项目的权限`,noExportPermission:`您没有导出项目的权限`,toast:{created:`项目已创建`,updated:`项目已更新`,deleted:`项目已删除`,imported:`项目已导入`,multipleImported:`已导入 {{count}} 个项目`,importFailed:`导入失败`,exported:`项目已导出（仅元数据）`}},projectDetail:{notFound:`未找到项目`,backToProjects:`返回项目`,export:`导出`,exportProject:`导出项目`,noExportPermission:`您没有导出项目的权限`,noEditPermission:`您没有编辑项目的权限`,partOf:`属于：`,priorityLabel:`优先级：`,noPrints:`此项目暂无打印`,status:{active:`进行中`,completed:`已完成`,archived:`已归档`},priority:{low:`低`,normal:`普通`,high:`高`,urgent:`紧急`},dueDate:{overdue:`已逾期`,today:`今天到期`,daysLeft:`还有 {{count}} 天`},progress:{platesProgress:`板进度`,partsProgress:`零件进度`,setsProgress:`完整套数`,sets:`套`,setsHint:`当每个可打印文件都达到此次数时，即完成一套`,printJobs:`打印任务`,parts:`零件`,percentComplete:`{{percent}}% 完成`,remaining:`剩余 {{count}} 个`},stats:{printJobs:`打印任务`,total:`总计`,failed:`{{count}} 个失败`,partsPrinted:`已打印 {{count}} 个零件`,printTime:`打印时间`,filamentUsed:`耗材用量`},cost:{title:`成本追踪`,filamentCost:`耗材成本`,energy:`能源`,totalCost:`总成本`,total:`总计`,includesBom:`含物料清单`,budget:`预算`,remaining:`剩余`},subProjects:{title:`子项目 ({{count}})`,jobs:`{{count}} 个任务`},rollup:{title:`包含 {{count}} 个子项目`,progress:`总体进度`,percentComplete:`已完成 {{percent}}%`},notes:{title:`备注`,noEditPermission:`您没有编辑备注的权限`,placeholder:`添加关于此项目的备注...`,empty:`暂无备注。点击编辑添加备注。`},files:{title:`文件`,linkFolders:`从文件管理器链接文件夹`,forQuickAccess:`到此项目以便快速访问。`,fileCount:`{{count}} 个文件`,empty:`未链接文件夹。前往文件管理器将文件夹链接到此项目。`,printedCount:`已打印 {{count}} 次`,progressTooltip:`已完成 {{done}}/{{target}} 次打印`,noFiles:`此文件夹中没有文件。`},bom:{title:`材料清单`,acquired:`已获取 {{completed}}/{{total}}`,showAll:`显示全部`,hideDone:`隐藏已完成`,addPart:`添加零件`,noAddPermission:`您没有添加零件的权限`,partNamePlaceholder:`零件名称（例如：M3x8 螺丝）`,partName:`零件名称`,qty:`数量`,price:`价格 ({{currency}})`,sourcingUrlPlaceholder:`采购链接（可选）`,remarksPlaceholder:`备注（可选）`,deletePart:`删除零件`,deleteConfirm:`确定要删除"{{name}}"吗？`,noUpdatePermission:`您没有更新零件的权限`,noEditPermission:`您没有编辑零件的权限`,noDeletePermission:`您没有删除零件的权限`,totalCost:`总成本：`,empty:`材料清单中没有零件。添加硬件、电子元件或其他组件以跟踪需要采购的物品。`},timeline:{title:`活动时间线`,empty:`暂无活动。`},template:{saveAsTemplate:`保存为模板`,noCreatePermission:`您没有创建模板的权限`},queue:{title:`队列`,viewAll:`查看全部`,printing:`{{count}} 个打印中`,queued:`{{count}} 个排队中`},prints:{title:`打印 ({{count}})`},toast:{projectUpdated:`项目已更新`,partAdded:`零件已添加`,partRemoved:`零件已移除`,exportFailed:`导出失败`,projectExported:`项目已导出`,templateCreated:`模板已创建`}},system:{title:`系统信息`,version:`版本`,uptime:`运行时间`,cpuUsage:`CPU 使用率`,memoryUsage:`内存使用率`,diskUsage:`磁盘使用率`,networkInfo:`网络信息`,logs:`日志`,debugMode:`调试模式`,enableDebug:`启用调试日志`,disableDebug:`禁用调试日志`,downloadLogs:`下载日志`,clearLogs:`清除日志`,dockerInfo:`Docker 信息`,containerName:`容器名称`,imageName:`镜像名称`,platform:`平台`,architecture:`架构`},sponsors:{sectionTitle:`独立运营·社区支持`,tagline:`Bambuddy 完全免费，并将持续免费——这要感谢主动支持的用户。没有风投，也没有云端绑定。`,viewSupporters:`查看支持者`,toastPrints:`你已经用 Bambuddy 完成了 {{count}} 次打印。Bambuddy 之所以免费，离不开支持者。`,toastCost:`你已经用 Bambuddy 追踪了 {{total}} 的耗材。看看是谁让项目保持独立。`,toastArchives:`用 Bambuddy 归档了 {{count}} 次打印。看看是谁让它保持独立。`,toastAnniversary:`与 Bambuddy 相伴一年了！看看是谁让项目保持独立。`,toastVersionUpdate:`已更新至 v{{version}}。Bambuddy 之所以免费，离不开支持者。`,toastBusiness:`您正在 {{count}} 台打印机上运行 Bambuddy？我们为团队提供支持方案：优先修复、开具发票，以及与维护者的直接沟通渠道。`,businessCta:`Bambuddy 商业版`,businessTitle:`Bambuddy 商业版`,businessTagline:`您正在管理 {{count}} 台打印机。我们为团队和打印农场提供优先支持、商业授权和发票开具。`},library:{title:`耗材库`,addFilament:`添加耗材`,editFilament:`编辑耗材`,deleteFilament:`删除耗材`,vendor:`厂商`,material:`材料`,color:`颜色`,kFactor:`K 值`,temperature:`温度`,noFilaments:`耗材库中没有耗材`,deleteConfirm:`确定要删除此耗材吗？`,importFromPrinter:`从打印机导入`,exportToFile:`导出到文件`,runWithPipeline:{actionLabel:`用流水线运行`,noPermission:`您没有运行流水线的权限`,modalTitle:`用流水线运行`,confirmTitle:`确认运行`,confirmIntro:`预检发现此次运行存在问题`,sourceHint:`来源`,pipelineHint:`流水线`,targetHint:`目标`,pipelineListAria:`可用流水线`,runAnyway:`仍然运行`,loading:`加载中…`,empty:`尚未保存流水线。请打开切片对话框并点击"另存为流水线"创建一个。`,noTarget:`未设置目标打印机`,noTargetMessage:`此流水线没有目标打印机。请在设置中打开并选择一个。`,copies:`副本数`,copiesHint:`最多 {{n}}`,classTarget:`任意 {{model}}`,toast:{started:`流水线运行已开始`,failed:`无法启动运行`},issue:{printerNotSet:`此流水线未设置目标打印机。`,printerNotFound:`目标打印机已不存在。`,printerDisabled:`目标打印机已禁用。`,printerOffline:`目标打印机已离线。`,filamentType:`耗材槽 {{slot}}：期望 {{expected}}，AMS 实际 {{actual}}`,filamentColor:`耗材槽 {{slot}}：颜色不同（期望 {{expected}}，AMS 实际 {{actual}}）`,amsSlotMissing:`此打印机上没有 AMS 槽 {{slot}}`,filamentUnverified:`耗材槽 {{slot}} 来自云端 / 标准预设，无法静态验证。`,noClassMatches:`此安装中没有匹配该流水线目标型号类别（{{expected}}）的打印机。`,classNotSet:`流水线目标设置为打印机类别但未选择型号。`}}},slicerSettings:{presetValuesOutdatedSidecar:`当前显示切片器默认值：切片 sidecar 版本早于此功能，无法提供预设的实际值。更新 sidecar 镜像即可查看。未改动的项目仍使用预设。`,presetValuesNotConfigured:`当前显示切片器默认值：未配置切片 sidecar，无法读取预设的实际值。未改动的项目仍使用预设。`,presetValuesSidecarUnavailable:`当前显示切片器默认值：切片 sidecar 未响应，无法读取预设的实际值。未改动的项目仍使用预设。`,presetValuesUnavailable:`当前显示切片器默认值：无法读取所选预设的实际值。未改动的项目仍使用预设。`,filamentDefault:`默认`,fromFile:`来自文件`,fromFileHint:`设计者在源文件中修改了此项，其值为 {{value}}。`,fromFilePrinterCoupled:`设计者的打印机`,fromFilePrinterCoupledHint:`针对该文件设计时所用的打印机调校，在你的打印机上可能不正确或超出范围。`,fromFileOverridesPreset:`覆盖预设`,fromFileOverridesPresetHint:`文件将其设为 {{value}}，而所选预设使用 {{preset}}。仅当应以文件为准时才勾选。`,useFromFile:`对 {{option}} 使用源文件中的值`,otherFromFile:`此文件中的其他设置`,fromFileSummary:`设计者在此文件中改动了 {{count}} 项工艺设置。只有你勾选的才会生效。`,fromFileUseAll:`使用设计者的设置`,fromFileUseAllHint:`勾选可跨打印机通用的设置。针对设计者自己打印机调校的，以及决定你所选预设的那些，保持不勾选。`,fromFileClear:`清除 {{count}} 项`,loading:`正在加载切片设置…`,mode:{simple:`简单`,advanced:`高级`,expert:`专家`},searchPlaceholder:`搜索设置`,resetAll:`重置 {{count}} 项`,resetOption:`恢复默认值`,noMatches:`没有与搜索匹配的设置。`},slice:{filamentSlotUnset:`未设置`,processSettingsEmbedded:`启用“使用文件内置设置”时不生效——本次切片由文件自身的设置决定。`,processSettingsInactive:`未启用`,presetsHidden:`已隐藏 {{count}} 项`,showAllPresets:`显示全部`,showFewerPresets:`显示较少`,processSettings:`工艺设置`,processSettingsHint:`为本次切片调整所选预设。未改动的项目仍按预设定义。`,processSettingsChanged:`已更改 {{count}} 项`,processSettingsUnchanged:`预设默认值`,title:`切片模型`,action:`切片`,actionAll:`切片全部 {{count}} 个盘面`,actionAllTitle:`将所有盘面切片为单个多盘面输出（一个归档）。耗材选择覆盖项目定义的每个槽位。`,allPlatesToggle:`切片全部 {{count}} 个盘面`,slicing:`切片中…`,printer:`打印机配置`,process:`工艺配置`,filament:`耗材配置`,filamentSlot:`耗材 {{index}}（{{type}}）`,filamentColour:`耗材颜色`,selectPreset:`— 选择预设 —`,loadingPresets:`加载预设中…`,analyzingPlateFilaments:`分析打印板耗材中…`,analyzingPlateFilamentsHint:`正在运行预览切片以发现此打印板使用的 AMS 插槽。之后会缓存 — 重新打开是即时的。`,previewToast:`分析 {{name}} — {{elapsed}}`,previewWithProgress:`分析 {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— 此打印板未使用`,noPresetsForSlot:`无可用预设`,otherPrinters:`其他打印机`,presetsLoadFailed:`加载预设失败。请先打开设置 → 配置文件以导入。`,refreshPresets:`刷新`,refreshPresetsTitle:`刷新预设 — 获取最新的云端和打包配置列表（在 Bambu Studio 或 Bambu Handy 中删除预设后使用）`,allPresetsRequired:`必须选择所有预设`,useEmbedded:`使用文件的内置设置`,useEmbeddedHint:`按设计者的设置（壁、填充、耗材）切片，而非上方的配置文件。因您的打印机与文件匹配而可用。`,autoOrient:`自动摆正模型`,autoOrientHint:`切片前由切片器把每个模型转到最适合打印的一面，会覆盖文件中保存的朝向。`,autoArrange:`自动排布在热床上`,autoArrangeHint:`由切片器重新摆放模型，使其不再重叠，会替换文件自带的布局。`,enqueuing:`提交切片任务中…`,queued:`已排队…`,failed:`切片失败。请检查切片器 sidecar 日志。`,startedToast:`在后台切片 {{name}}…`,queuedToast:`已排队：{{name}} — {{elapsed}}`,runningToast:`切片 {{name}} — {{elapsed}}`,runningWithProgress:`{{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,runningWithProgressMultiPlate:`盘面 {{plateIndex}} / {{plateCount}} • {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,completedToast:`已切片 {{name}}`,externalWriteFallbackToast:`已保存到内部库：无法写入外部文件夹`,failedTitle:`切片失败`,failedToast:`切片 {{name}} 失败：{{detail}}`,tier:{local:`已导入`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`标准`},cloud:{notAuthenticated:`登录 Bambu Cloud（设置 → 配置文件 → Bambu Cloud）以查看云端预设。`,expired:`Bambu Cloud 会话已过期 — 请重新登录以刷新云端预设。`,unreachable:`目前无法访问 Bambu Cloud。本地和标准预设仍可使用。`},orcaCloud:{notAuthenticated:`登录 Orca Cloud（配置文件 → Orca Cloud）以查看您的 Orca 预设。`,expired:`Orca Cloud 会话已过期 — 请重新登录以刷新您的 Orca 预设。`,unreachable:`Orca Cloud 当前无法访问。其他预设仍可正常使用。`},bedType:{label:`打印板`,auto:`自动（使用工艺预设）`,coolPlate:`冷板`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`},pipelines:{label:`流水线`,applyAria:`应用流水线`,applyPrompt:`应用流水线…`,empty:`无已保存流水线`,saveButton:`另存为流水线`,saveTitle:`将当前四个槽位的选择保存为可复用流水线`,namePlaceholder:`流水线名称`,nameAria:`新流水线名称`,toast:{applied:`已应用 "{{name}}"`,saved:`流水线已保存`,saveFailed:`保存失败`}}},spoolman:{title:`Spoolman 集成`,enabled:`Spoolman 已启用`,url:`Spoolman URL`,connected:`已连接`,disconnected:`未连接`,testConnection:`测试连接`,sync:`同步`,syncing:`同步中...`,lastSync:`上次同步`,linkToSpoolman:`链接到 Spoolman`,openInSpoolman:`在 Spoolman 中打开`,unlinkSpool:`取消链接耗材`,unlinkConfirmTitle:`取消分配料盘？`,unlinkConfirmMessage:`这将从此插槽中移除料盘。料盘本身的数据将保持不变。`,selectSpool:`选择耗材`,noUnlinkedSpools:`无未分配的料盘`,linkSuccess:`料盘分配成功`,linkFailed:`料盘分配失败`,unlinkSuccess:`料盘取消分配成功`,unlinkFailed:`料盘取消分配失败`,linkedSpool:`已分配料盘`,spoolId:`耗材 ID`,fillSourceLabel:`(Spoolman)`,weight:`重量`,remaining:`剩余`,disableWeightSync:`禁用 AMS 估计重量同步`,disableWeightSyncDesc:`不从 AMS 估计值更新剩余容量。如果您更喜欢 Spoolman 的用量追踪而非 AMS 百分比估计，请使用此选项。新耗材仍将使用 AMS 估计值作为初始重量。`,reportPartialUsage:`报告失败打印的部分用量`,reportPartialUsageDesc:`当打印失败或被取消时，根据层进度报告估计的耗材使用量。`},locations:{title:`存储位置`,subtitle:`管理货架、抽屉等线轴物理存放位置`,add:`添加位置`,addShort:`添加`,edit:`编辑位置`,name:`名称`,spools:`线轴`,sensors:`传感器`,empty:`尚无存储位置。创建第一个货架或抽屉。`,manage:`位置`,createPlaceholder:`例如：A 架、抽屉 1`,nameRequired:`位置名称为必填项`,created:`位置已创建`,updated:`位置已更新`,deleted:`位置已删除`,saveFailed:`保存位置失败`,deleteFailed:`删除位置失败`,deleteBlocked:`删除前请移走此位置上的所有线轴`,confirmDelete:`删除「{{name}}」？`,confirmDeleteMessage:`此位置将从目录中移除。请先移走线轴。`,confirmDeleteMessageWithSensors:`此位置将从目录中移除。请先移走线轴。关联的传感器也将被删除。`},inventory:{title:`耗材库存`,subtitle:`管理您的料盘`,addToInventory:`添加到库存`,addToInventoryPending:`正在添加...`,addToInventorySuccess:`料盘已添加到库存`,addToInventoryFailed:`添加料盘到库存失败`,unknownSpoolTitle:`检测到新耗材`,unknownSpoolMessage:`在 {{location}} 检测到带有未知 RFID 标签的料盘。是否立即添加到库存？`,unknownSpoolSlot:`槽位`,bulk:{selectAllVisible:`选择所有可见项`,selectRow:`选择行`,selectGroup:`选择组`,selectionCount:`已选 {{count}} 个`,edit:`编辑`,printLabels:`打印标签`,resetUsage:`重置使用量`,restore:`恢复`,archive:`归档`,delete:`删除`,clearSelection:`清除选择`,editTitle:`批量编辑料盘`,editSubtitle:`将应用于选中的 {{count}} 个料盘。仅更新勾选的字段。`,editHint:`在字段中输入即可标记为更新 — 仅发送已勾选的行。留空字段不会更改料盘（清空字段仅能在单个料盘中操作）。`,useCustom:`使用 "{{value}}"`,toggleField:`切换此字段的更新`,changeCount:`将更新 {{count}} 个字段。`,applyPending:`应用中...`,applyButton:`应用于 {{count}} 个料盘`,deleteTitle:`删除选中的料盘`,archiveTitle:`归档选中的料盘`,restoreTitle:`恢复选中的料盘`,resetUsageTitle:`重置选中料盘的使用量`,deleteMessage:`永久删除 {{count}} 个料盘？此操作无法撤销。`,archiveMessage:`归档 {{count}} 个料盘？以后可以恢复。`,restoreMessage:`恢复 {{count}} 个已归档的料盘？`,resetUsageMessage:`将 {{count}} 个料盘的"总消耗"计数器重置？剩余重量将被保留。`,updateSuccess:`已更新 {{count}} 个料盘`,updateFailed:`批量更新失败`,updatePartial:`已更新 {{ok}} 个，{{failed}} 个失败`,updateAllFailed:`{{count}} 个料盘更新全部失败 — 已保留选择以便重试`,deleteSuccess:`已删除 {{count}} 个料盘`,deleteFailed:`批量删除失败`,deletePartial:`已删除 {{ok}} 个，{{failed}} 个失败`,deleteAllFailed:`{{count}} 个料盘删除全部失败 — 已保留选择以便重试`,archiveSuccess:`已归档 {{count}} 个料盘`,archiveFailed:`批量归档失败`,archivePartial:`已归档 {{ok}} 个，{{failed}} 个失败`,archiveAllFailed:`{{count}} 个料盘归档全部失败 — 已保留选择以便重试`,restoreSuccess:`已恢复 {{count}} 个料盘`,restoreFailed:`批量恢复失败`,restorePartial:`已恢复 {{ok}} 个，{{failed}} 个失败`,restoreAllFailed:`{{count}} 个料盘恢复全部失败 — 已保留选择以便重试`,invalidHex:`请输入 6 位十六进制字符 (RRGGBB) 或 8 位 (RRGGBBAA)，否则该字段不会应用。`},spoolmanMixedContentTitle:`Spoolman 无法通过 HTTPS 加载 — 浏览器已阻止混合内容`,spoolmanMixedContentBody:`Bambuddy 通过您的反向代理以 HTTPS 提供服务，但您的 Spoolman 地址仍为 HTTP。出于安全考虑，浏览器会阻止混合内容，因此嵌入式 Spoolman 界面无法加载。Spoolman 也必须通过 HTTPS 访问。`,spoolmanMixedContentFixReverseProxy:`请将 Spoolman 置于与 Bambuddy 相同的反向代理（Traefik / Nginx / Caddy）之后并启用 HTTPS，然后在设置中将 Spoolman URL 更新为新的 HTTPS 地址。`,spoolmanMixedContentFixOpenNewTab:`作为变通方案，可在新标签页中通过 HTTP 打开 Spoolman — 混合内容规则仅适用于嵌入式框架，独立标签页仍可正常使用。`,spoolmanOpenInNewTab:`在新标签页中打开 Spoolman`,labels:{title:`打印线材标签`,selectedCount:`已选 {{count}} 项`,pickSpools:`选择要打印标签的线材：`,monochrome:`单色（黑白打印机）`,monochromeHint:`移除颜色色块并加宽文本`,startingPosition:`标签起始位置`,startingPositionRange:`仅适用于标签纸模板：L7160 支持 1–21；5160 支持 1–30。`,startingPositionInvalid:`请输入 1 到 {{capacity}} 之间的整数。`,startingPositionFirst:`从位置 1 开始打印。`,startingPositionSkipped:`第一张标签纸的位置 1 到 {{lastPosition}} 将留空。`,startingPositionRangeError:`此标签纸的起始位置必须在 1 到 {{capacity}} 之间。`,searchPlaceholder:`按名称、品牌或 #ID 搜索`,filterByMaterial:`材料：`,allMaterials:`全部`,selectVisible:`选择所有可见 ({{count}})`,deselectVisible:`取消选择可见`,clearAll:`全部清除`,noSpoolsToShow:`没有要显示的线材。请调整筛选条件后重试。`,noMatches:`没有线材符合当前搜索或筛选。`,printOne:`打印此线材的标签`,printLabels:`打印标签…`,bulkTitle:`从当前显示的 {{count}} 个线材中选择要打印标签的`,noSpoolsTitle:`没有要打标签的线材`,error:`无法生成标签：{{msg}}`,sortBy:{label:`排序：`,id:`按 ID`,color:`按颜色`},templates:{amsHolderSmall:{label:`AMS 支架 — 小 (74 × 33 mm)`,hint:`每页一个标签；适配 MakerWorld 模型 752566 (AMS 耗材标签支架) 中可打印的标签。`},amsHolderLarge:{label:`AMS 支架 — 大 (75 × 55 mm)`,hint:`每页一个标签；适配 AMS 耗材标签支架的卡片插入款。空间充足，可放置色板、品牌、材料、ID 与二维码。`},box40x30:{label:`盒标签 (40 × 30 mm)`,hint:`每页一张；常见的 DK/Brother 卷尺寸，适合给耗材袋和储物盒贴标签。`},box:{label:`Box label (62 × 29 mm)`,hint:`每页一个标签；适配 Brother PT/QL 和 Dymo 小标签。`},averyL7160:{label:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,hint:`欧洲规格纸张；每张 A4 页 21 个标签。`},avery5160:{label:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,hint:`美国规格纸张；每张 Letter 页 30 个标签。`}}},csv:{importButton:`导入 CSV`,exportButton:`导出 CSV`,modalTitle:`从 CSV 导入耗材`,selectFile:`选择 CSV 文件或拖放到此处`,dragHint:`表头：material（必填）、brand、subtype、color_name、rgba、…`,parsing:`正在读取文件…`,previewError:`无法读取 CSV 文件`,validCount:`{{count}} 个有效`,errorCount:`{{count}} 个错误`,skippedCount:`{{count}} 个跳过`,colRow:`行`,colStatus:`状态`,colColor:`颜色`,colorResolved:`已从目录填充颜色`,colorCrossMaterial:`颜色取自其他材料 — 目录中无精确匹配`,duplicateExisting:`已存在具有此材料、品牌和颜色的料卷 — 仍会作为新料卷导入`,spoolmanHint:`在 Spoolman 模式下，请使用 Spoolman 内置的 CSV 导入/导出。`,importValidRows:`导入 {{count}} 个有效行`,noValidRows:`没有有效行`,importing:`正在导入…`,importSuccess:`已导入 {{count}} 个耗材`,importError:`导入失败`,exportError:`导出失败`},addSpool:`添加耗材`,editSpool:`编辑耗材`,copySpool:`复制耗材`,material:`材料`,selectMaterial:`选择材料...`,subtype:`子类型`,brand:`品牌`,searchBrand:`搜索品牌...`,useCustomBrand:`使用"{{brand}}"`,useCustomMaterial:`使用自定义材料：{{material}}`,suggestedOptions:`推荐`,allOptions:`全部`,colorName:`颜色名称`,colorNamePlaceholder:`翡翠白、烈焰红...`,color:`颜色`,hexColor:`十六进制颜色`,pickColor:`选择自定义颜色`,labelWeight:`标签重量`,coreWeight:`空盘重量`,searchSpoolWeight:`搜索耗材重量...`,weightUsed:`已使用`,currentWeight:`剩余重量`,measuredWeight:`称量重量`,spoolName:`线轴`,costPerKg:`每公斤成本`,storageLocation:`存放位置`,temperature:`温度`,humidity:`湿度`,battery:`电池`,storageLocationPlaceholder:`例如：货架A，抽屉1`,openInInventory:`在库存中查看`,measuredWeightError:`称量重量必须在 {{min}}g 到 {{max}}g 之间。`,slicerFilament:`切片耗材`,slicerFilamentName:`切片预设名称`,slicerPreset:`切片预设`,searchPresets:`搜索耗材预设...`,selectedPreset:`已选择`,noPresetsFound:`未找到预设`,tempOverrides:`温度覆盖`,note:`备注`,notePlaceholder:`关于此耗材的任何备注...`,category:`类别`,categoryPlaceholder:`例如：生产、原型、客户A`,categoryNone:`未分类`,storageLocationNone:`未设置位置`,lowStockThresholdOverride:`低库存阈值（此料盘）`,lowStockThresholdOverrideHelp:`留空以使用全局阈值（{{global}}%）。`,clearRfid:`清除 RFID 标签`,rfidCleared:`RFID 标签已清除`,archive:`归档`,restore:`恢复`,noSpools:`暂无耗材。添加您的第一个耗材开始使用。`,noAvailableSpools:`没有可用的耗材。请先向库存中添加耗材，或从其他槽位取消分配一个耗材。`,kProfiles:`K 值配置`,addKProfile:`添加 K 值配置`,assignSpool:`分配耗材`,unassignSpool:`取消分配`,assignSuccess:`耗材已分配，AMS 槽位已配置`,assignPendingInsert:`已分配。插入耗材后将配置槽位。`,assignFailed:`分配耗材失败`,assignMismatchTitle:`材料不匹配`,assignMismatchMessage:`所选线轴材料 "{{spoolMaterial}}" 与 {{location}} 的料槽材料 "{{trayMaterial}}" 不匹配。仍要分配吗？`,assignMismatchConfirm:`仍然分配`,assignPartialMismatchMessage:`线轴材料 "{{spoolMaterial}}" 与 {{location}} 的 "{{trayMaterial}}" 相近但不完全一致。是否继续？`,assignProfileMismatchMessage:`线轴配置 "{{spoolProfile}}" 与 {{location}} 的料槽配置 "{{trayProfile}}" 不一致。是否继续？`,assignReconfigureNote:`AMS 槽位将重新配置为使用线轴的配置。`,selectSpool:`选择要分配到此槽位的耗材`,assigned:`已分配`,assigning:`分配中...`,searchSpools:`搜索耗材...`,showAllSpools:`显示所有耗材`,spoolmanSpools:`Spoolman 线轴`,allMaterials:`所有材料`,filterByBrand:`按品牌筛选...`,showArchived:`显示已归档`,quickAdd:`快速添加（库存）`,quantity:`数量`,stock:`库存`,configured:`已配置`,spoolsCreated:`已创建 {{count}} 个耗材`,spoolsPartiallyCreated:`已创建 {{created}} / {{total}} 个耗材（部分失败）`,spoolCreated:`耗材已创建`,spoolUpdated:`耗材已更新`,spoolDeleted:`耗材已删除`,deepLinkSpoolNotFound:`未找到耗材`,deepLinkFetchFailed:`无法加载耗材 — 请重试`,spoolArchived:`耗材已归档`,spoolRestored:`耗材已恢复`,kProfileSaveFailed:`K值配置文件设置无法保存`,syncWeightSpoolNotFound:`未找到耗材 — 可能已被删除`,syncWeightSpoolmanUnreachable:`Spoolman 无法访问 — 请稍后再试`,syncWeightFailed:`重量同步失败`,spoolmanUnreachable:`Spoolman 无法访问 — 请稍后再试`,deleteSpoolNotFound:`未找到耗材 — 可能已被删除`,deleteFailed:`删除耗材失败`,archiveSpoolNotFound:`未找到耗材 — 可能已被删除`,archiveFailed:`归档耗材失败`,restoreSpoolNotFound:`未找到耗材 — 可能已被删除`,restoreFailed:`恢复耗材失败`,saveFailed:`保存更改失败`,tagClearFailed:`清除标签失败`,deleteConfirm:`确定要删除此耗材吗？此操作无法撤销。`,archiveConfirm:`确定要归档此耗材吗？`,advancedSettings:`高级设置`,filamentInfoTab:`耗材信息`,paProfileTab:`PA 配置`,colorAndCostTab:`颜色与成本`,printersTab:`打印机`,filamentInfo:`耗材`,additional:`附加`,loadingPresets:`加载云端预设中...`,cloudConnected:`云端已连接`,cloudNotConnected:`云端未连接（使用默认值）`,recentColors:`最近`,searchColors:`搜索颜色...`,searchResults:`搜索结果`,allColors:`所有颜色`,commonColors:`常用颜色`,showLess:`显示更少`,showAll:`显示全部`,noColorsFound:`没有颜色匹配您的搜索`,noResults:`未找到匹配项`,extraColorsLabel:`附加颜色`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`粘贴 2 到 8 个十六进制色值,以逗号分隔。将渲染为渐变。`,extraColorsInvalid:`已忽略无效的十六进制值:{{tokens}}`,colorEffectLabel:`效果`,colorEffect:{none:`无`,sparkle:`闪光`,wood:`木纹`,marble:`大理石`,glow:`夜光`,matte:`哑光`,silk:`丝光`,galaxy:`星空`,rainbow:`彩虹`,metal:`金属`,translucent:`半透明`,gradient:`渐变`,dualColor:`双色`,triColor:`三色`,multicolor:`多色`},selectMaterialFirst:`请先在耗材信息选项卡中选择材料。`,noPrintersConfigured:`未配置打印机。添加打印机以使用 PA 配置。`,matchingFilter:`匹配`,anyBrand:`任何品牌`,anyVariant:`任何变体`,autoSelect:`自动选择`,matches:`匹配`,match:`匹配`,noMatches:`无匹配`,connected:`已连接`,offline:`离线`,printerOffline:`打印机离线。连接后查看校准配置。`,noKProfilesMatch:`没有 K 值配置匹配所选耗材。`,leftNozzle:`左喷嘴`,rightNozzle:`右喷嘴`,profilesSelected:`个校准配置已选择`,filamentPreset:`耗材预设`,presetUseSpoolDefault:`使用料卷的预设`,presetInherited:`继承`,presetOverride:`已覆盖`,presetNeedsModel:`该打印机尚未上报机型，因此无法设置专属预设。`,autoMatchPresets:`自动匹配`,autoMatchPresetsHint:`查找料卷预设中标明各机型的对应版本`,kProfilesPerPrinter:`K 值配置`,kProfileNotSet:`未设置`,kProfileFlowMismatch:`此配置是在 {{profile}} 喷嘴上测得的，但当前装的是 {{fitted}} 喷嘴，因此不会应用`,nozzle:`喷嘴`,unknownModel:`未知机型`,onePrinter:`1 台打印机`,nPrinters:`{{n}} 台打印机`,filamentPresetsLoadFailed:`无法加载该料卷的按机型预设`,filamentPresetSaveFailed:`无法保存按机型预设`,totalInventory:`总库存`,totalConsumed:`总消耗`,byMaterial:`按材料`,inPrinter:`在打印机中`,lowStock:`库存不足`,sinceTracking:`自开始追踪`,resetConsumedCounter:`重置计数器`,resetConsumedCounterTooltip:`将此料盘的已消耗克数计数器清零。剩余重量保持不变。`,resetConsumedCounterConfirm:`将此料盘的已消耗克数计数器重置为 0？后续打印将从零开始计数。料盘本身、剩余重量计算和您的设置不会改变。`,resetAllConsumedCounters:`重置所有计数器`,resetAllConsumedCountersTooltip:`将每个料盘的已消耗克数计数器清零。剩余重量保持不变。`,resetAllConsumedCountersConfirm:`将全部 {{count}} 个料盘（含已归档）的已消耗克数计数器重置为 0？这将清空"累计消耗"统计值，后续打印从零开始计数。料盘和剩余重量不会改变。`,consumedCounterReset:`计数器已重置`,allConsumedCountersReset:`已重置 {{count}} 个料盘的计数器`,resetConsumedCounterFailed:`重置计数器失败`,loadedInAms:`已装载到 AMS/外置`,remaining:`剩余`,weightCheck:`重量检查`,lastWeighed:`上次称量`,neverWeighed:`从未称量`,search:`搜索耗材...`,showing:`显示`,to:`到`,of:`共`,show:`显示`,spools:`个耗材`,spool:`个耗材`,page:`页`,noSpoolsMatch:`未找到结果`,noSpoolsMatchDesc:`尝试调整您的搜索或筛选条件。`,active:`活跃`,archived:`已归档`,all:`全部`,used:`已使用`,new:`新的`,clearFilters:`清除筛选`,table:`表格`,cards:`卡片`,net:`净重`,groupSimilar:`分组`,groupedSpools:`{{count}} 个相同耗材`,groupedRows:`行`,columns:`列`,configureColumns:`配置列`,configureColumnsDesc:`拖动以重新排序列或使用箭头。使用眼睛图标切换可见性。`,visible:`可见`,reset:`重置`,cancel:`取消`,applyChanges:`应用更改`,moveUp:`上移`,moveDown:`下移`,hideColumn:`隐藏列`,showColumn:`显示列`,linkToSpool:`链接到耗材`,tagLinked:`标签已链接到耗材`,tagLinkFailed:`链接标签失败`,tagAlreadyLinked:`标签已链接到耗材 #{{id}}`,unknownTag:`检测到未知 RFID 标签`,usageHistory:`使用历史`,noUsageHistory:`暂无使用记录`,printName:`打印名称`,weightConsumed:`消耗重量`,clearHistory:`清除`,historyCleared:`使用历史已清除`,fillSourceLabel:`(库存)`,lowStockThresholdError:`阈值必须在 0.1 到 99.9 之间`,spoolmanFilamentCatalog:`Spoolman 耗材目录`,pickFromSpoolmanCatalog:`从 Spoolman 目录选择…`,spoolmanFilamentSelected:`已从 Spoolman 目录选择耗材`,spoolmanFilamentUnlinked:`已解除耗材目录关联`,noSpoolmanFilaments:`Spoolman 目录中未找到耗材`,spoolmanFilamentColorSwatch:`耗材颜色`,spoolWeightManagedBySpoolman:`空线轴重量在 Spoolman 中按耗材类型管理`,spoolmanCatalogLoadFailed:`无法加载 Spoolman 耗材目录`},timelapse:{title:`延时摄影`,create:`创建延时摄影`,download:`下载`,delete:`删除`,preview:`预览`,frameRate:`帧率`,quality:`质量`,processing:`处理中...`,noTimelapses:`无可用延时摄影`},ams:{title:`AMS`,slot:`槽位`,empty:`空`,emptySlot:`空槽位`,slotEmpty:`空`,slotUnconfigured:`?`,emptySlotReset:`未分配料盘`,unknown:`未知`,humidity:`湿度`,temperature:`温度`,filamentType:`耗材类型`,filamentColor:`颜色`,remaining:`剩余`,history:`AMS 历史`,noHistory:`无可用历史`,configureSlot:`配置槽位`,externalSpool:`外置耗材`,profile:`配置`,kFactor:`K 值`,kFactorShort:`K 值`,fill:`填充`,configure:`配置`,used:`已使用`,remainingUnit:`剩余`},printModal:{variants:{editNote:`这些备选在任务加入队列时确定。如需更改，请取消后重新加入队列。`,title:`打印机备选`,help:`一个任务，占一个队列位。第一台空闲且匹配的打印机会打印它对应的文件。`,unknownModel:`未知型号`,plateFor:`{{filename}} 的盘`,moveUp:`上移`,moveDown:`下移`,queued:`已加入队列，含 {{count}} 个备选`},selectPrinter:`选择打印机`,selectPlate:`选择板`,filamentMapping:`耗材映射`,useArchiveMapping:`映射`,useArchiveMappingTooltip:`从此存档保存的 AMS 映射（来自切片软件）中选择所有槽位，而不是按类型/颜色匹配。`,clickToChangeSlot:`点击更改槽位分配`,reRead:`重新读取`,plateN:`板 {{n}}`,plateFilamentsUnreadable:`无法读取所选盘的耗材信息，因此无法进行映射。取消选择该盘即可将其余盘加入队列。`,totalCost:`总成本：`,slotRemainingShort:` - 剩余 {{grams}}g`,printSettings:`打印设置`,bedLeveling:`热床调平`,flowCalibration:`流量校准`,vibrationCalibration:`振动校准`,layerInspection:`首层检查`,timelapse:`延时摄影`,cancel:`取消`,noPrintersAvailable:`无可用打印机`,printerBusy:`打印机忙碌`,printerOffline:`打印机离线`,sameTypeDifferentColor:`相同类型，不同颜色`,filamentTypeNotLoaded:`耗材类型未装载`,statusReady:`就绪`,statusColorMismatch:`颜色不匹配`,statusTypeNotFound:`未找到类型`,requiredTooltip:`需要：{{name}} - {{color}}`,manuallySelected:`手动选择`,autoMatched:`自动匹配`,selectSlot:`选择槽位`,sameTypeDifferentColorDetail:`相同类型，不同颜色：需要 {{required}}，槽位为 {{loaded}}`,requiredTypeNotInPrinter:`打印机中未找到所需的耗材类型。`,whenToPrint:`何时打印`,asap:`尽快`,queue:`队列`,schedule:`计划`,dateTime:`日期和时间`,invalidDateTime:`请输入有效的日期和时间`,openCalendar:`打开日历`,requireManualStart:`要求手动开始`,requirePreviousSuccess:`仅在上一次打印成功后开始`,autoOffAfter:`完成后关闭打印机`,helpAsap:`打印将添加到队列顶部，并在符合条件的打印机空闲后立即开始。`,helpSchedule:`如果打印机空闲，打印将在计划时间开始。如果打印机忙碌，则会等待其可用。`,helpQueue:`打印将添加到队列末尾。`,leftNozzle:`左`,rightNozzle:`右`,leftNozzleTooltip:`左喷嘴`,rightNozzleTooltip:`右喷嘴`,ftsSameInletHint:`本次打印的所有耗材都在耗材变轨器 IN-{{inlet}} 上。同一入口的耗材之间切换较慢，可将其中一卷移到另一入口的 AMS。`,rackPosition:`刀架位置`,rackPositionTooltip:`由刀架上的哪个喷嘴打印此耗材。位置编号与打印机上一致。`,rackEmptyPosition:`此刀架位置为空`,rackWrongNozzle:`装有 {{has}} 喷嘴；此耗材需要 {{needs}}`,filamentOverride:`耗材覆盖`,filamentOverrideHint:`可选覆盖用于基于模型的耗材分配。调度器将使用您选择的耗材而不是原始 3MF 值进行匹配。`,originalFilament:`原始`,overrideWith:`覆盖为`,resetToOriginal:`恢复为原始`,insufficientFilamentTitle:`耗材不足`,waitingForAmsStatus:`正在等待 {{printer}} 的 AMS 状态…`,insufficientFilamentMessage:`部分已分配线轴的剩余耗材少于本次打印所需：`,insufficientFilamentLine:`{{printer}} - {{slot}}：需要 {{required}}g，剩余 {{remaining}}g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}：需要 {{required}}g，匹配料卷共剩余 {{remaining}}g（AMS 备用料盘）`,printAnyway:`仍然打印`,forceColorMatch:`强制颜色匹配`,staggerPrinterStarts:`错峰启动打印机`,staggerGroupSize:`组大小`,staggerInterval:`间隔（分钟）`,staggerPreview:`{{printers}} 台打印机 → {{groups}} 个 {{size}} 台的组，每 {{interval}} 分钟启动一次`,staggerLastGroup:`最后一组：{{count}}`,staggerTotal:`共 {{minutes}} 分钟`,staggerToPrinters:`分批发送到 {{count}} 台打印机`,gcodeInjection:`注入自动打印G-code`,insufficientBudget:`预算不足`,unlimitedNoBudget:`无限制 – 未设置预算上限。`,noPrintableCostCenters:`没有可用于打印的有效成本中心。请联系管理员授予你打印权限。`},backup:{includesEncryptionKey:`本地备份包含 MFA 加密密钥文件（DATA_DIR/.mfa_encryption_key），因此备份 ZIP 是自包含的。请将 ZIP 视为敏感文件 — 任何拥有该文件的人都可以解密内部存储的 OIDC 客户端密钥和 TOTP 密钥。`,title:`备份与恢复`,createBackup:`创建备份`,restoreBackup:`恢复备份`,restoreDescription:`从备份文件替换所有数据`,downloadBackup:`下载备份`,uploadBackup:`上传备份`,lastBackup:`上次备份`,autoBackup:`自动备份`,backupNow:`立即备份`,restoreWarning:`警告：恢复备份将覆盖所有当前数据。`,includeArchives:`包含归档`,includeSettings:`包含设置`,includeProfiles:`包含配置文件`,backupSuccess:`备份创建成功`,restoreSuccess:`备份恢复成功`,backupFailed:`备份失败`,restoreFailed:`恢复失败`,restoreNote:`恢复期间虚拟打印机将停止`,githubBackup:`GitHub 备份`,enabled:`已启用`,cloudLoginRequired:`需要登录 Bambu Cloud。请在 配置文件 → 云配置文件 中登录以启用 GitHub 备份。`,cloudLoginRequiredShort:`需要Cloud登录`,githubDescription:`自动将您的配置文件同步到私有 GitHub 仓库以进行备份和版本历史记录。`,repoIsPrivate:`仓库为私有 — 可以安全备份。`,repoIsPublicWarning:`仓库为公开（PUBLIC）。Bambuddy 备份包含 MQTT 凭据、Home Assistant 令牌、Prometheus 令牌、您的 Bambu Cloud 邮箱以及通过 K-profile 暴露的打印机访问代码。在您于提供商设置中将仓库改为私有之前，保存将被阻止。`,repoVisibilityUnknown:`无法确定仓库的可见性。Bambuddy 拒绝向任何未确认为私有的目标进行备份；保存将被阻止。`,repositoryUrl:`仓库 URL`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`允许不安全的 HTTP`,allowInsecureHttpHint:`为无 TLS 的私有网络自托管实例启用`,personalAccessToken:`个人访问令牌`,tokenSaved:`（已保存）`,enterNewToken:`输入新令牌以更新`,tokenHintGitHub:`具有 Contents 读写权限的细粒度令牌，或具有 repo 范围的经典令牌。`,tokenHintGitLab:`具有 api 范围的令牌，或同时具有 read_repository 和 write_repository。`,tokenHintGitea:`具有 write:repository 范围的令牌。`,tokenHintForgejo:`具有 write:repository 范围的令牌。仅限于此仓库的令牌即可。`,branch:`分支`,provider:`Git 提供商`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`仅手动`,hourly:`每小时`,daily:`每天`,weekly:`每周`,includeInBackup:`包含在备份中`,kProfiles:`K 配置文件`,kProfilesDescription:`来自已连接打印机的压力推进校准`,noPrintersConnected:`没有打印机连接`,printersConnected:`{{connected}}/{{total}} 已连接`,cloudProfiles:`云配置文件`,cloudProfilesDescription:`来自 Bambu Cloud 和 Orca Cloud 的耗材、打印机和工艺预设`,cloudProfilesAccounts:`已连接账户 — Bambu Cloud：{{bambu}}，Orca Cloud：{{orca}}`,appSettings:`应用设置`,appSettingsDescription:`Bambuddy 配置（完整数据库）`,spoolInventory:`耗材库存`,spoolInventoryDescription:`耗材卷轴、使用记录和成本追踪`,printArchives:`打印档案`,printArchivesDescription:`打印历史元数据（不含 gcode/3MF 文件）`,lastBackupAt:`上次备份：`,noBackupsYet:`尚无备份`,next:`下次：`,startingBackup:`正在启动备份...`,test:`测试`,enableBackup:`启用备份`,testConnection:`测试连接`,enterRepoUrl:`请输入仓库 URL`,enterRepoAndToken:`请输入仓库 URL 和访问令牌`,repoRequired:`仓库 URL 为必填项`,tokenRequired:`访问令牌为必填项`,githubBackupEnabled:`GitHub 备份已启用`,tokenUpdated:`令牌已更新`,settingsSaved:`设置已保存`,failedToSave:`保存失败：{{message}}`,backupCompleteFiles:`备份完成 - {{count}} 个文件已更新`,backupSkippedNoChanges:`备份已跳过 - 无更改`,backupFailed2:`备份失败：{{message}}`,clearedLogs:`已清除 {{count}} 条日志`,failedToClearLogs:`清除日志失败：{{message}}`,restoreFromGit:{button:`从 Git 恢复`,title:`从 Git 备份恢复`,subtitle:`选择提交以及要恢复的内容`,commitLabel:`备份提交`,latestCommit:`最新备份（分支最新提交）`,categoriesLabel:`恢复内容`,inspecting:`正在读取备份内容...`,itemCount:`备份中有 {{count}} 项`,overwriteLabel:`覆盖已有条目`,overwriteOn:`已有条目将根据备份内容更新。`,overwriteOff:`仅添加缺失的条目，已有条目保持不变。`,selectedCount:`已选择 {{count}} 项`,restoring:`正在恢复...`,confirmTitle:`要从备份恢复吗？`,confirmMessage:`将从此提交恢复所选类别。缺失的条目会被添加，已有条目保持不变。`,confirmMessageOverwrite:`将从此提交恢复所选类别，并覆盖本地已存在的条目。此操作无法撤销。`,kprofilesOverwriteCaveat:`K 值配置是例外：写入插槽总会替换打印机上的校准数据。`,tally:`已恢复 {{restored}} 项，跳过 {{skipped}} 项，失败 {{failed}} 项`,reloadHint:`请重新加载 Bambuddy，以便恢复的数据在各处生效。`,partialHint:`上面列出的类别已完成并已保存。未列出的类别没有执行。`,failed:`恢复失败。`,loadFailed:`无法读取备份仓库。`,details:{notPresent:`此备份提交中不存在`,unreadableJson:`无法解析的 JSON：{{paths}}`,settingsNoPayload:`数据中没有设置`,settingsCredentialsWillSkip:`将跳过 {{count}} 个疑似凭据的键`,settingsCompanionWillSkip:`将跳过 {{count}} 个疑似凭据的键，依赖它们的 {{companion}} 个开关将保持关闭`,settingsCompanionOnlyWillSkip:`{{companion}} 个开关将保持关闭 - 每个开关所需的凭据无法从备份中恢复`,spoolsUsageCount:`其中含 {{count}} 条使用记录`,archivesMetadataOnly:`仅元数据 - 3MF 文件和缩略图不在 Git 备份中`,kprofilesPrinterCount:`涉及 {{count}} 台打印机`},notes:{noData:`此备份中没有这类数据`,archivesPrinterMissing:`部分归档引用了已不存在的打印机 - 已清除关联`,archivesProjectMissing:`部分归档引用了已不存在的项目 - 已清除关联`,archivesOwnerCleared:`部分归档引用了已不存在的用户 - 已清除归属，因此在管理员重新指派之前，只有拥有 archives:read_all 权限的用户才能看到它们`,archivesOwnerUnmatched:`部分归档指向本实例没有的用户 - 已清除归属，而不是根据备份中的用户 ID 猜测，因此在管理员重新指派之前，只有拥有 archives:read_all 权限的用户才能看到它们`,archivesOwnerUnknown:`部分归档在恢复时没有归属 - 此备份未记录归属，因此在管理员指派之前，只有拥有 archives:read_all 权限的用户才能看到它们`,archivesUndeleted:`备份之后被删除的归档重新可见 - 当时启用了覆盖`,archivesMetadataOnly:`恢复的归档仅含元数据 - 3MF 文件和缩略图不在 Git 备份中`,spoolUsageUnresolved:`已跳过 {{count}} 条使用记录 - 其耗材卷不在此备份的耗材列表中，没有可挂接的对象。`,spoolUsageUnlinked:`已恢复 {{count}} 条使用记录，但缺少打印历史关联 - 请同时选择“打印归档”和“耗材库存”以保留该关联。`,spoolTagKept:`{{count}} 个耗材标签保持原样 - 按备份内容会清除此后扫描过的标签，或把它挪到另一卷耗材上。`,settingsCredentialsSkipped:`已跳过 {{count}} 个疑似凭据的键 - 请手动重新输入密钥`,settingsAuthSkipped:`已跳过 {{count}} 项认证设置 - 请在“设置 > 认证”中修改，以便锁定检查继续生效`,settingsCompanionSkipped:`{{keys}} 保持关闭 - 它们各自所需的凭据无法从备份恢复，本实例也没有存储，开启会让集成处于未认证状态`,settingsMqttRelayFailed:`MQTT 设置已恢复，但中继无法重新连接 - 请重启 Bambuddy`,kprofilesAlwaysOverwrite:`K 值配置总是覆盖打印机上对应的槽位`,kprofilesAckUnreliable:`打印机不回应时仍计为已恢复 - 请在打印机上核对配置`,kprofilesPrinterMissing:`没有序列号为 {{serial}} 的打印机 - 已跳过`,kprofilesPrinterOffline:`{{printer}}（{{serial}}）未连接 - 已跳过`,kprofilesUnknownNozzle:`{{serial}} 的喷嘴直径 {{nozzle}} 不在预期范围内 - 已原样发送`,kprofilesUnmatched:`{{nozzle}} 的 {{count}} 个配置在 {{printer}} 上没有对应项 - 已作为新配置添加`,kprofilesSendFailed:`无法将 {{nozzle}} 的配置发送到 {{printer}}（{{serial}}）`,kprofilesRefused:`{{printer}}（{{serial}}）拒绝了 {{nozzle}} 的配置：{{reason}}`,kprofilesStepFailed:`K 值配置步骤未能完成 - {{reason}}。在此之前恢复的内容仍已保存。`}},history:`历史记录`,clear:`清除`,date:`日期`,status:`状态`,trigger:`类型`,triggers:{manual:`备份（手动）`,scheduled:`备份（计划）`,restore:`恢复`},commit:`提交`,localBackup:`本地备份`,localBackupDescription:`创建 Bambuddy 数据的完整备份，包括数据库、档案、上传和所有文件。`,downloadBackupLabel:`下载备份`,completeBackupZip:`完整备份：数据库 + 所有文件（ZIP）`,download:`下载`,preparingBackup:`正在准备备份...`,creatingArchive:`正在创建备份归档...对于大型归档可能需要一些时间。`,downloadingFile:`正在下载备份文件...`,backupDownloaded:`备份下载成功`,failedToCreateBackup:`创建备份失败：{{message}}`,restore:`恢复`,restoreReplacesAll:`恢复将替换所有数据。`,restoreReplacesAllDetail:`您当前的数据库和文件将被完全替换。恢复后需要重启。`,restoreConfirmTitle:`恢复备份`,restoreConfirmMessage:`您确定要从"{{filename}}"恢复吗？这将完全替换您当前的数据库和所有文件。恢复后需要重启应用程序。`,restoreConfirmButton:`恢复备份`,uploadingFile:`正在上传备份文件...`,backupRestoredRestart:`备份已恢复。请重启 Bambuddy。`,failedToRestore:`恢复备份失败。请检查文件格式。`,reloadNow:`立即重新加载`,creatingBackup:`正在创建备份`,restoringBackup:`正在恢复备份`,preparing:`准备中...`,processing:`处理中...`,doNotClosePage:`请不要关闭此页面或导航离开。对于大型备份，此操作可能需要几分钟。`,restoring:`恢复中...`,restoreComplete:`恢复完成`,restoreFailed2:`恢复失败`,importSettings:`从备份文件导入设置`,pleaseWaitRestoring:`请等待数据恢复中`,selectBackupFile:`点击选择备份文件（.json 或 .zip）`,duplicateHandling:`重复项处理方式：`,matchPrinters:`打印机`,matchPrintersBy:`按序列号匹配`,matchSmartPlugs:`智能插座`,matchSmartPlugsBy:`按 IP 地址匹配`,matchNotificationProviders:`通知提供者`,matchNotificationProvidersBy:`按名称匹配`,matchFilaments:`耗材`,matchFilamentsBy:`按名称 + 类型 + 品牌匹配`,matchArchives:`档案`,matchArchivesBy:`按内容哈希匹配（始终跳过）`,matchPendingUploads:`待上传`,matchPendingUploadsBy:`按文件名匹配`,matchSettingsTemplates:`设置和模板`,matchSettingsTemplatesBy:`始终覆盖`,replaceExisting:`替换现有数据`,keepExisting:`保留现有数据`,overwriteDescription:`用备份数据覆盖已存在的项目`,keepDescription:`仅恢复尚不存在的项目`,overwriteCaution:`注意：`,overwriteWarning:`覆盖将用备份数据替换您当前的配置。出于安全考虑，打印机访问代码永远不会被覆盖。`,cancel:`取消`,processingBackup:`正在处理备份文件...`,itemsRestored:`已恢复项目`,itemsSkipped:`已跳过项目`,restored:`已恢复`,skippedAlreadyExist:`已跳过（已存在）`,filesCategory:`文件（3MF、缩略图等）`,andMore:`...还有 {{count}} 项`,newApiKeysGenerated:`已生成新的 API 密钥`,keysShownOnce:`这些密钥仅显示一次。请立即复制！`,copy:`复制`,noDataFound:`在备份文件中未找到可恢复的数据。`,close:`关闭`,scheduledBackup:`定时备份`,scheduledBackupDescription:`按计划自动创建备份快照。输出目录可以挂载到 NAS 或外部存储。`,frequency:`频率`,backupTime:`时间`,retention:`保留`,retentionDescription:`保留备份数量`,outputPath:`输出路径`,outputPathPlaceholder:`默认：{{path}}`,outputPathDescription:`留空以使用默认位置`,runNow:`立即运行`,backupFiles:`备份文件`,noScheduledBackups:`暂无备份`,deleteBackup:`删除`,deleteBackupConfirm:`删除此备份文件？`,backupRunning:`备份中...`,scheduledBackupComplete:`备份成功完成`,scheduledBackupFailed:`备份失败`,nextBackup:`下次备份`,backupSize:`大小`,localTimeHint:`本地时间 ({{tz}})`,defaultPathLabel:`默认：`,pathCheck:{title:`Bambuddy 无法写入该目录`,howToFix:`解决方法：`,sandboxed:`Bambuddy 服务无法写入 {{path}}。它的 systemd 单元以 ProtectSystem=strict 运行，因此除安装、数据和日志目录之外的所有目录对服务而言都是只读的，即使你自己的 shell 可以写入也一样。`,read_only:`{{path}} 位于只读文件系统上。`,permission_denied:`Bambuddy 无权写入 {{path}}。请检查该目录的属主和权限。`,no_space:`{{path}} 所在的文件系统已满。`,not_a_directory:`{{path}} 存在，但不是目录。`,missing:`{{path}} 不存在且无法创建。`,error:`Bambuddy 无法写入 {{path}}。`,ephemeralTitle:`这些备份在容器重建后会丢失`,container_ephemeral:`{{path}} 位于 Bambuddy 容器内部，而不是宿主机上。写入其中的备份会在容器重建时丢失。请从宿主机挂载该目录：`},categories:{settings:`设置`,notification_providers:`通知提供者`,notification_templates:`通知模板`,smart_plugs:`智能插座`,printers:`打印机`,filaments:`耗材`,maintenance_types:`维护类型`,archives:`档案`,projects:`项目`,pending_uploads:`待上传`,external_links:`外部链接`,api_keys:`API 密钥`}},tags:{title:`标签`,addTag:`添加标签`,editTag:`编辑标签`,deleteTag:`删除标签`,tagName:`标签名称`,tagColor:`标签颜色`,noTags:`无标签`,deleteConfirm:`确定要删除此标签吗？`,manageTags:`管理标签`},uploadModal:{title:`上传 3MF 文件`,dragDrop:`将 .3mf 文件拖放到此处`,or:`或`,browseFiles:`浏览文件`,extractionInfo:`将从 3MF 文件元数据中自动提取打印机型号。`,uploaded:`已上传`,failed:`失败`,uploading:`上传中...`,upload:`上传`,uploadFailed:`上传失败`},editArchive:{title:`编辑归档`,name:`名称`,namePlaceholder:`打印名称`,printer:`打印机`,noPrinter:`无打印机`,project:`项目`,noProject:`无项目`,itemsPrinted:`打印数量`,itemsPrintedHelp:`此打印任务中生产的物品数量。整块打印板报废时填 0。`,filamentUsed:`已用耗材 (g)`,filamentUsedPlaceholder:`例如 46.16`,filamentUsedHelp:`当打印任务在没有 3MF 的情况下归档时，可手动填写，使其仍计入耗材总量。重新扫描带有 3MF 的归档时，该数值会从文件中重新读取。`,notes:`备注`,notesPlaceholder:`添加关于此打印的备注...`,externalLink:`外部链接`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`链接到 Printables、Thingiverse 或其他来源`,tags:`标签`,tagsPlaceholder:`添加标签...`,addMoreTags:`添加更多标签...`,matchingTags:`匹配"{{query}}"`,existingTags:`现有标签`,clickToAdd:`（点击添加）`,status:`状态`,failureReason:`失败原因`,selectReason:`选择原因...`,photos:`打印成品照片`,photosHelp:`点击 + 添加打印成品照片`,printResult:`打印成品`,saving:`保存中...`,failureReasons:{adhesionFailure:`附着力失败`,spaghettiDetached:`拉丝 / 脱落`,layerShift:`层偏移`,cloggedNozzle:`喷嘴堵塞`,filamentRunout:`耗材用完`,warping:`翘曲`,stringing:`拉丝`,underExtrusion:`挤出不足`,powerFailure:`断电`,userCancelled:`用户取消`,noStatusUpdate:`未收到状态更新`,other:`其他`},statuses:{completed:`已完成`,failed:`失败`,aborted:`已取消`,printing:`打印中`}},kProfiles:{title:`K 值配置`,noPrintersConfigured:`未配置打印机`,addPrinterInSettings:`在设置中添加打印机以管理 K 值配置`,noActivePrinters:`无活跃打印机`,enablePrinterConnection:`启用打印机连接以查看其 K 值配置`,loadingProfiles:`加载 K 值配置中...`,printerOffline:`打印机离线`,printerOfflineDesc:`所选打印机未连接。开启电源以查看 K 值配置。`,noMatchingProfiles:`无匹配的配置`,noMatchingProfilesDesc:`没有配置匹配您的搜索条件`,noKProfiles:`无 K 值配置`,noKProfilesDesc:`未找到 {{diameter}}mm 喷嘴的压力推进配置`,createFirstProfile:`创建第一个配置`,printer:`打印机`,nozzle:`喷嘴`,refresh:`刷新`,addProfile:`添加配置`,export:`导出`,import:`导入`,select:`选择`,selectAll:`全选`,delete:`删除`,searchPlaceholder:`按名称或耗材搜索...`,allExtruders:`所有挤出机`,leftOnly:`仅左侧`,rightOnly:`仅右侧`,allFlow:`所有流量`,hfOnly:`仅高流量`,sOnly:`仅标准`,sortName:`排序：名称`,sortKValue:`排序：K 值`,sortFilament:`排序：耗材`,leftExtruder:`左挤出机`,rightExtruder:`右挤出机`,modal:{addTitle:`添加 K 值配置`,editTitle:`编辑 K 值配置`,profileName:`配置名称`,profileNamePlaceholder:`我的 PLA 配置`,kValue:`K 值`,kValuePlaceholder:`0.020`,kValueHelp:`典型范围：PLA 0.01 - 0.06，PETG 0.02 - 0.10`,filament:`耗材`,selectFilament:`选择耗材...`,source:{local:`已导入`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`内置`},noFilamentsHelp:`没有可用的耗材。请登录 Bambu Cloud，或在“配置 → 本地配置”中导入预设。`,searchFilaments:`搜索耗材...`,noFilamentMatches:`没有符合搜索条件的耗材`,flowType:`流量类型`,highFlow:`高流量`,standard:`标准`,nozzleSize:`喷嘴尺寸`,extruder:`挤出机`,extruders:`挤出机`,left:`左`,right:`右`,notes:`备注（本地存储）`,notesPlaceholder:`添加关于此配置的备注...`,notesHelp:`备注保存在 Bambuddy 中，不在打印机上`,syncing:`与打印机同步中...`,savingExtruder:`保存到挤出机 {{current}}/{{total}}...`,pleaseWait:`请稍候`},deleteConfirm:{title:`删除配置`,cannotUndo:`此操作无法撤销`,message:`确定要从打印机删除"{{name}}"吗？`},bulkDelete:{title:`删除配置`,cannotUndo:`此操作无法撤销`,message:`确定要从打印机删除 {{count}} 个选中的配置吗？`},toast:{profileSaved:`K 值配置已保存`,profilesSaved:`K 值配置已保存到 {{count}} 个挤出机`,selectAtLeastOneExtruder:`请至少选择一个挤出机`,selectFilament:`请先选择耗材`,filamentNotResolvable:`没有与 {{name}} 对应的 Bambu 耗材 ID，打印机无法保存该配置`,profileDeleted:`K 值配置已删除`,profilesDeleted:`已删除 {{count}} 个配置`,exportedProfiles:`已导出 {{count}} 个配置`,importedProfiles:`已导入 {{count}} / {{total}} 个配置`,noProfilesToExport:`无可导出的配置`,invalidFileFormat:`无效的文件格式`,failedToParseImport:`解析导入文件失败`,failedToSaveBatch:`批量保存 K 值配置失败`,noteSaved:`备注已保存`,failedToSaveNote:`保存备注失败`},permission:{noRead:`您没有刷新配置的权限`,noCreate:`您没有添加配置的权限`,noUpdate:`您没有更新 K 值配置的权限`,noDelete:`您没有删除 K 值配置的权限`,noExport:`您没有导出配置的权限`,noImport:`您没有导入配置的权限`}},virtualPrinter:{title:`虚拟打印机`,running:`运行中`,stopped:`已停止`,description:{default:`启用虚拟打印机，使其在 Bambu Studio 和 OrcaSlicer 中可见。发送到此打印机的文件将直接归档而不打印。`,proxy:`启用代理，将切片软件流量中继到真实打印机，允许在任何网络上远程打印。`},enable:{title:`启用虚拟打印机`,visibleInSlicer:`在切片软件发现中显示为"Bambuddy"`,proxyingTo:`代理到 {{name}}`,notActive:`未激活`},model:{title:`打印机型号`,description:`选择要模拟的打印机型号。`,restartWarning:`更改型号将重启虚拟打印机`},accessCode:{title:`访问码`,isSet:`访问码已设置`,notSet:`未设置访问码 - 需要设置才能启用`,placeholder:`输入 8 位字符代码`,placeholderChange:`输入新代码以更改`,hint:`必须恰好 8 个字符。切片软件使用此代码进行认证。`,charCount:`({{count}}/8)`,inheritedFromTarget:`继承自目标打印机`,derivedFromTargetHint:`使用目标打印机的访问码。桥接会将切片软件的认证转发到实际打印机，因此两个访问码必须匹配 — 如需更改，请在打印机设置中编辑访问码。`,reveal:`显示访问码`,hide:`隐藏访问码`},targetPrinter:{title:`目标打印机`,configured:`代理目标已配置`,notConfigured:`未选择目标打印机 - 代理模式需要设置`,placeholder:`选择打印机...`,hint:`选择要将切片软件流量代理到的打印机。打印机必须处于局域网模式。`,noPrinters:`未配置打印机。请先添加打印机以使用代理模式。`},remoteInterface:{title:`网络接口覆盖`,configured:`接口覆盖已激活`,optional:`可选 - 当自动检测的 IP 不正确时使用（例如多网卡、Docker、VPN）`,placeholder:`自动检测（默认）...`,hint:`覆盖通过 SSDP 广播并在 TLS 证书中使用的 IP 地址。在 Bambuddy 有多个网络接口时很有用。`},mode:{title:`模式`,archive:`归档`,archiveDesc:`立即归档文件`,review:`审核`,reviewDesc:`归档前审核`,queue:`队列`,queueDesc:`归档并添加到队列`,proxy:`代理`,proxyDesc:`中继到真实打印机`},autoDispatch:{title:`自动派发`,description:`添加到队列时自动开始打印。关闭后，打印任务等待手动派发。`},queueForceColorMatch:{title:`强制颜色匹配`,description:`拒绝派发到没有完全相同耗材类型和颜色的打印机。默认关闭 — 不启用时，队列仅按型号匹配，可能选到颜色错误的打印机。`},saveAmsMapping:{title:`保存 AMS 映射`,description:`将切片软件自身选择的 AMS 槽位（来自 project_file MQTT 命令）保存到存档中，以便之后重新打印时复用同一卷实体线材，而不是根据文件的类型/颜色重新推导。默认关闭。`},gcodeInjection:{title:`G-code 注入`,description:`将“设置”中按型号配置的 G-code 片段应用到此 VP 的作业。默认关闭。`},tailscaleDisabled:{title:`Tailscale 集成`,description:`启用以将此 VP 标记为通过 Tailscale 公开。显示主机的 Tailscale 地址，以便您知道要粘贴到切片器中的 IP。CA 导入步骤保持不变 — 此开关对证书无影响。`},setupRequired:{title:`需要设置`,description:`虚拟打印机功能需要额外的系统配置才能工作。包括端口转发、防火墙规则和平台特定设置。`,readGuide:`启用前请阅读设置指南`},archiveNameSource:{title:`存档名称来源`,description:`选择通过虚拟打印机接收文件时新存档的命名方式。"元数据"使用 3MF 中嵌入的切片标题（默认）。"文件名"使用 Bambu Studio 通过 FTP 发送的文件名。注意：当 3MF 包含标题字段时，Bambu Studio 会用该字段覆盖您在"发送到打印机"对话框中输入的名称，因此两种模式通常会产生相同的字符串。`,metadata:`元数据`,filename:`文件名`},caCert:{title:`切片软件证书`,description:`虚拟打印机使用由 Bambuddy CA 签发的 TLS 证书。将此 CA 证书导入切片软件的信任库一次，切片软件即可接受连接 — 无需再通过命令行获取。`,copy:`复制`,copied:`已复制`,download:`下载`,fingerprint:`SHA-256`},howItWorks:{title:`工作原理`,step1:`在同一局域网中，虚拟打印机会通过发现机制自动出现在您的切片软件（Bambu Studio / OrcaSlicer）中。从其他网络，通过 IP 地址和访问码手动添加。`,step2:`在归档、审核和队列模式下，使用切片软件中的"发送"按钮将 3MF 文件上传到 Bambuddy。切片软件会显示"打印成功"— 文件已存储，未打印。`,step3:`在代理模式下，虚拟打印机将所有流量中继到真实打印机 — 打印会立即开始，就像直接连接一样。`},status:{title:`状态详情`,printerName:`打印机名称`,model:`型号`,serialNumber:`序列号`,mode:`模式`,pendingFiles:`待处理文件`,targetPrinter:`目标打印机`,ftpPort:`FTP 端口`,mqttPort:`MQTT 端口`,ftpConnections:`FTP 连接`,mqttConnections:`MQTT 连接`},toast:{updated:`虚拟打印机设置已更新`,failedToUpdate:`更新设置失败`,copyFailed:`复制失败 — 请手动选中文本`,accessCodeRequired:`请先设置访问码`,targetPrinterRequired:`请先选择目标打印机`,bindIpRequired:`请先设置绑定 IP`,accessCodeEmpty:`访问码不能为空`,accessCodeLength:`访问码必须恰好 8 个字符`,targetCodeChangedRebind:`访问码已同步到新的目标打印机。请在切片软件中重新添加此设备以使用新的访问码。`,created:`虚拟打印机已创建`,failedToCreate:`创建虚拟打印机失败`,deleted:`虚拟打印机已删除`,failedToDelete:`删除虚拟打印机失败`},list:{title:`虚拟打印机`,add:`添加`,addFirst:`添加虚拟打印机`,empty:`未配置虚拟打印机。添加一个以开始使用。`},bindIp:{title:`绑定接口`,placeholder:`选择接口...`,hint:`此虚拟打印机绑定的网络接口。每台打印机必须唯一。`},proxy:{accessCodeHint:`在代理模式下，在切片软件中使用目标打印机的访问码。连接会透明转发到真实打印机。`},addDialog:{title:`添加虚拟打印机`,name:`名称`,hint:`创建后可以配置访问码、目标打印机和其他设置。`,create:`创建`},deleteConfirm:{title:`删除虚拟打印机`,message:`确定要删除"{{name}}"吗？这将停止此打印机的所有服务。`}},modelViewer:{openInSlicer:`在切片软件中打开`,openInSlicerWith:`用{{slicer}}打开`,moreSlicerOptions:`更多切片软件选项`,openInSlicerFailed:`无法在切片软件中打开`,tabs:{model:`3D 模型`},notAvailable:`不可用`,plates:`板`,allPlates:`所有板`,plateNumber:`板 {{number}}`,plateCount:`{{count}} 个板`,plateCount_other:`{{count}} 个板`,objectCount:`{{count}} 个对象`,objectCount_other:`{{count}} 个对象`,filamentCount:`{{count}} 种耗材`,filamentCount_other:`{{count}} 种耗材`,eta:`预计 {{minutes}} 分钟`,noPreview:`此文件无可用预览`,pagination:{pageOf:`第 {{current}} / {{total}} 页`,prev:`上一页`,next:`下一页`},errors:{failedToLoad:`加载文件失败`,noMeshes:`3MF 文件中未找到网格`,unsupportedFormat:`不支持的文件格式`}},maintenanceDescriptions:{lubricateCarbonRods:`在碳纤维杆上涂抹润滑剂以确保顺畅运动`,lubricateRails:`在线性导轨上涂抹润滑剂以确保顺畅运动`,cleanNozzle:`清洁热端和喷嘴以防止堵塞`,checkBelts:`检查皮带张力以确保打印精度`,cleanBuildPlate:`清洁构建板以获得更好的附着力`,checkExtruder:`检查挤出机齿轮磨损情况`,checkCooling:`确保冷却风扇正常工作`,generalInspection:`打印机综合检查`,cleanCarbonRods:`清洁碳纤维杆以减少摩擦`,lubricateSteelRods:`在钢杆上涂抹润滑剂以确保顺畅运动`,cleanSteelRods:`清洁钢杆以减少摩擦`,cleanLinearRails:`擦拭线性导轨以清除灰尘和碎屑`,checkPtfeTube:`检查 PTFE 管的磨损或损坏`,replaceHepaFilter:`更换 HEPA 过滤器以保证空气质量`,replaceCarbonFilter:`更换活性炭过滤器`,lubricateLeftNozzleRail:`润滑左喷嘴导轨（H2 系列）`},haSensors:{label:`传感器`,unavailable:`不可用`,blocksPrints:`{{entity}} — 警报期间暂停打印`,states:{open:`打开`,closed:`关闭`,unlocked:`已解锁`,locked:`已锁定`,detected:`已检测`,clear:`无`,wet:`潮湿`,dry:`干燥`,problem:`异常`,ok:`正常`,running:`运行中`,stopped:`已停止`,on:`开`,off:`关`},sectionTitle:`Home Assistant 传感器（打印机）`,add:`添加传感器`,addTitle:`添加 Home Assistant 传感器`,editTitle:`编辑 Home Assistant 传感器`,empty:`还没有传感器。绑定 Home Assistant 的门磁或温度计，即可显示在打印机卡片上。`,unknownPrinter:`未知打印机`,badgeBlocks:`暂停打印`,badgeNotifies:`发送通知`,badgeHidden:`卡片上隐藏`,printer:`打印机`,entity:`实体`,searchPlaceholder:`搜索实体...`,noEntities:`没有匹配的实体`,name:`显示名称`,alertWhen:`警报条件`,alertNever:`从不 — 仅显示`,alertAbove:`高于`,alertBelow:`低于`,alertHint:`进入警报状态后会在打印机卡片上高亮显示，并启用下面的选项。`,showOnCard:`在打印机卡片上显示`,notifyOnAlert:`触发警报时发送通知`,blockPrint:`警报期间暂停队列中的打印`,blockPrintHint:`任务会留在队列中，传感器恢复后自动开始。Home Assistant 无法连接时忽略此设置。`,toast:{created:`已添加传感器`,updated:`已保存传感器`,deleted:`已删除传感器`},error:{pickEntity:`请选择一个 Home Assistant 实体`,nameRequired:`请输入显示名称`,printerRequired:`请选择一台打印机`,alertRequired:`请先设置警报条件`}},locationHaSensors:{sectionTitle:`Home Assistant 传感器（存放位置）`,sectionDescription:`将 Home Assistant 的温度、湿度或电量传感器绑定到存放位置，即可在耗材卡片和表格中显示实时数值。每个存放位置每个类别只能绑定一个传感器。`,add:`添加传感器`,addTitle:`添加 Home Assistant 传感器`,editTitle:`编辑 Home Assistant 传感器`,empty:`还没有传感器。绑定 Home Assistant 的温度或湿度传感器，即可显示在耗材卡片上。`,unknownLocation:`未知位置`,location:`存放位置`,showOnCard:`在耗材卡片上显示`,overwriteConfirm:{title:`要替换现有传感器吗？`,messageTemperature:`"{{location}}" 已绑定温度传感器：{{name}}。继续将替换它。`,messageHumidity:`"{{location}}" 已绑定湿度传感器：{{name}}。继续将替换它。`,messageBattery:`"{{location}}" 已绑定电池传感器：{{name}}。继续将替换它。`},autoAdd:{confirmTitle:`是否也添加其他传感器？`,confirmMessage:`Bambuddy 还为此位置找到了其他传感器。请选择要一并添加的传感器。`,added:`已同时添加：{{names}}`,noneFound:`未找到该位置匹配的温度、湿度或电池传感器。`,onlyThisOne:`仅此一个`},options:{buttonLabel:`传感器选项`,title:`位置传感器选项`,description:`当某个位置绑定第一个传感器时，若自动添加温度、湿度或电池传感器，将使用这些默认值。`,generalSettings:`常规设置`,pollInterval:`更新间隔（秒）`,pollIntervalHint:`Bambuddy 轮询 Home Assistant 并刷新屏幕上传感器数值的频率。最少 60 秒。`,colorizeValues:`根据警报阈值为传感器数值着色`,aboveColor:`超过阈值的颜色`,belowColor:`低于阈值的颜色`,optimalColor:`最佳值颜色`,colors:{red:`红色`,orange:`橙色`,yellow:`黄色`,green:`绿色`,blue:`蓝色`,purple:`紫色`,pink:`粉色`},saved:`选项已保存`,saveFailed:`保存选项失败`,reset:`重置`,resetConfirm:{title:`要重置所有现有位置传感器吗？`,message:`这将使用上方配置的值覆盖所有现有存储位置温度、湿度和电池传感器的警报阈值、通知和卡片可见性设置，并将每个传感器的名称恢复为其在 Home Assistant 中的友好名称——不会影响打印机传感器。此操作无法撤销。根据传感器数量的不同，这可能需要一些时间。`},resetDone:`已应用于 {{count}} 个位置传感器`,resetFailed:`重置位置传感器失败`},deleteAllConfirm:{title:`删除所有传感器？`,message:`这将删除绑定到"{{location}}"的全部 {{count}} 个传感器。此操作无法撤销。`},currentlyBound:`当前绑定：{{entity}}`,error:{locationRequired:`请选择存放位置`},toast:{created:`已添加传感器`,updated:`已保存传感器`,deleted:`已删除传感器`}},smartPlugs:{offline:`离线`,admin:`管理`,openPlugAdminPage:`打开插座管理页面`,deleteSmartPlug:`删除智能插座`,turnOnSmartPlug:`开启智能插座`,turnOffSmartPlug:`关闭智能插座`,turnOn:`开启`,turnOff:`关闭`,addSmartPlug:{scanningNetwork:`扫描网络中...`,chooseEntity:`选择实体...`,connectionFailed:`连接失败`,searchEntities:`搜索实体...`,searchPowerSensors:`搜索功率传感器...`,searchEnergySensors:`搜索能量传感器...`,placeholders:{plugName:`客厅插座`,mqttStateOnValue:`ON、true、1`,mqttSameAsPower:`与功率主题相同，或不同`}},linkedTo:`关联到：`,monitorOnly:`仅监控`,alerts:`警报`,scheduleOn:`开启 {{time}}`,scheduleOff:`关闭 {{time}}`,on:`开启`,off:`关闭`,power:`功率`,kwhToday:`今日kWh`,settings:`设置`,automationSettings:`自动化设置`,showInSwitchbar:`在开关栏显示`,quickAccessSidebar:`从侧边栏快速访问`,enabled:`已启用`,enableAutomation:`为此插座启用自动化`,autoOn:`自动开启`,autoOnDescription:`打印开始时开启`,autoOff:`自动关闭`,autoOffDescription:`打印完成时关闭（一次性）`,autoOffPersistent:`保持启用`,autoOffPersistentDescription:`在打印之间保持启用而非一次性`,controlsPrinterPower:`为打印机供电`,controlsPrinterPowerDescription:`如果此插座仅为配件（滤芯风扇、灯光）供电，请关闭此选项；否则关闭插座会将打印机标记为离线。`,autoOffAfterDrying:`干燥完成后自动关闭`,autoOffAfterDryingDescription:`AMS 干燥完成后关闭`,delayAfterDryingMinutes:`干燥后延迟（分钟）`,turnOffDelayMode:`关闭延迟模式`,time:`时间`,temp:`温度`,delayMinutes:`延迟（分钟）`,tempThreshold:`温度阈值（°C）`,tempThresholdDescription:`当喷嘴冷却到此温度以下时关闭`,edit:`编辑`,deleteConfirm:`确定要删除"{{name}}"吗？此操作无法撤销。`,turnOnConfirm:`确定要开启"{{name}}"吗？`,turnOffConfirm:`确定要关闭"{{name}}"吗？这将切断连接设备的电源。`,failedToTurn:`无法{{action}}"{{name}}"`,unknown:`未知`,addTitle:`添加智能插座`,editTitle:`编辑智能插座`,stopScanning:`停止扫描`,discoverTasmota:`发现Tasmota设备`,foundDevices:`找到{{count}}个设备 - 点击选择：`,noDevicesFound:`未在您的网络中找到Tasmota设备`,haNotConfigured:`Home Assistant未配置。请在以下位置设置`,haSettingsPath:`设置 → 网络 → Home Assistant`,selectEntity:`选择实体 *`,ipAddress:`IP地址 *`,nameLabel:`名称 *`,username:`用户名`,password:`密码`,authHint:`如果您的Tasmota设备不需要认证，请留空`,linkToPrinter:`关联打印机`,noPrinter:`无打印机（仅手动控制）`,linkingDescription:`关联后可在打印开始/完成时自动开关`,powerAlerts:`功率警报`,alertAbove:`高于时警报（W）`,alertBelow:`低于时警报（W）`,alertDescription:`当电力消耗超过这些阈值时收到通知。留空以禁用该方向。`,dailySchedule:`每日计划`,turnOnAt:`开启时间`,turnOffAt:`关闭时间`,scheduleDescription:`每天在这些时间自动开关插座。留空以跳过该操作。`,showOnPrinterCard:`在打印机卡片上显示`,displayOnPrinterCard:`在打印机卡片上显示按钮`,connectedResult:`已连接！`,deviceLabel:`设备：{{name}} - `,stateLabel:`状态：{{state}}`,test:`测试`,delete:`删除`,save:`保存`,add:`添加`,cancel:`取消`,failedToStartScan:`无法开始扫描`,nameRequired:`名称为必填项`,entityRequired:`Home Assistant插座需要实体`,mqttTopicRequired:`必须为功率、能源或状态监控配置至少一个MQTT主题`,loadingEntities:`正在加载实体...`,loading:`加载中...`,failedToLoadEntities:`加载实体失败：{{error}}`,noEntitiesMatching:`未找到匹配"{{search}}"的实体`,noEntitiesAvailable:`无可用实体`,searchingEntities:`搜索所有实体（找到{{count}}个）`,showingEntities:`显示 switch、light、input_boolean（{{count}}个可用）`,energyMonitoringOptional:`能源监控（可选）`,energyMonitoringHint:`搜索并选择提供功率/能源数据的传感器。`,powerSensorW:`功率传感器（W）`,energyTodayKwh:`今日能源（kWh）`,totalEnergyKwh:`总能源（kWh）`,noMatchingSensors:`无匹配的传感器`,none:`无`,mqttNotConfigured:`MQTT代理未配置。请在以下位置设置代理地址`,mqttSettingsPath:`设置 → 网络 → MQTT发布`,mqttNotConfiguredSuffix:`（您不需要启用发布，只需填写代理详细信息）。`,mqttMonitorOnlyDescription:`MQTT插座通过MQTT订阅接收功率/能源数据。开关控制不可用 - 请使用您的MQTT代理或家庭自动化系统。`,powerMonitoring:`功率监控`,energyMonitoring:`能源监控`,stateMonitoring:`状态监控`,optional:`可选`,topic:`主题`,jsonPath:`JSON路径`,multiplier:`乘数`,onValue:`ON值`,mqttPowerHint:`JSON路径从JSON负载中提取值（例如"power_l1"）。如果主题发布原始数值，请留空。
+Valor ON: a string exata que significa "ON". Deixe vazio para detecção automática (ON, true, 1).`,restControl:`Controle`,restOnUrl:`URL para ligar`,restOffUrl:`URL para desligar`,restOnBody:`Corpo da requisição ON`,restOffBody:`Corpo da requisição OFF`,restMethod:`Método HTTP`,restHeaders:`Custom Headers (JSON)`,restStatusUrl:`URL de status`,restStatusPath:`Caminho JSON de estado`,restStatusOnValue:`Valor ON`,restPowerUrl:`URL de potência`,restPowerPath:`Caminho JSON de energia`,restPowerMultiplier:`Multiplicador de potência`,restEnergyUrl:`URL de energia`,restEnergyPath:`Caminho JSON de energia (hoje)`,restEnergyTotalPath:`Caminho JSON de energia (contador total)`,restEnergyTotalMultiplier:`Multiplicador do contador total`,restEnergyTotalPathHint:`ex.: aenergy.total`,restEnergyTotalHint:`Muitas tomadas — todos os Shelly entre elas — informam apenas um contador acumulado que nunca é zerado. Ele vai aqui, não no campo acima: lido como o consumo de hoje, ele nunca voltaria a zero à meia-noite, e Ontem e Total ficariam vazios. O Bambuddy calcula Hoje e Ontem a partir dele, o que exige um ou dois dias de leituras. Um Shelly informa em watt-hora, então use um multiplicador de 0.001.`,restEnergyMultiplier:`Multiplicador de energia`,restUrlRequired:`Ao menos uma URL (ON ou OFF) é necessária para tomadas REST`,restHeadersHint:`ex. {"Authorization": "Bearer your-token"}`,restBodyHint:`ex. ON, {"state": "on"}`,restStatusHint:`URL para consultar o estado atual`,restPathHint:`ex. state ou data.power.status`,restPowerUrlHint:`URL separada para dados de potência (usa a URL de status se vazio)`,restEnergyUrlHint:`URL separada para dados de energia (usa a URL de status se vazio)`,restEnergyHint:`Cada valor pode usar sua própria URL ou recorrer à URL de status. Use multiplicadores para conversão de unidades (ex: 0.001 para converter Wh em kWh).`,testConnection:`Testar conexão`,connectionSuccess:`Conexão bem-sucedida`,noSwitchesInSwitchbar:`Nenhum interruptor na barra`,enableSwitchbarHint:`Ative "Mostrar na barra de interruptores" em Configurações > Smart Plugs`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`E-mail`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`Notificações por e-mail SMTP`,telegram:`Notificações via bot do Telegram`,discord:`Enviar para canal do Discord via webhook`,ntfy:`Notificações push gratuitas e auto-hospedáveis`,pushover:`Notificações push simples e confiáveis`,callmebot:`Notificações gratuitas via WhatsApp pelo CallMeBot`,webhook:`POST HTTP genérico para qualquer URL`,homeassistant:`Notificações persistentes no painel do Home Assistant`,bark:`Notificações push do iOS via Bark (auto-hospedável)`},lastSuccess:`Último: {{date}}`,error:`Erro`,printer:`Impressora:`,allPrinters:`Todas as impressoras`,sendTestNotification:`Enviar Notificação de Teste`,eventSettings:`Configurações de Eventos`,enabled:`Ativado`,sendFromProvider:`Enviar notificações deste provedor`,printEvents:`Eventos de Impressão`,printerStatus:`Status da Impressora`,amsAlarms:`Alarmes do AMS`,amsHtAlarms:`Alarmes do AMS-HT`,printQueue:`Fila de Impressão`,start:`Início`,plateCheck:`Verificação da Mesa`,complete:`Concluído`,failed:`Falhou`,stopped:`Parado`,progress:`Progresso`,offline:`Offline`,lowFilament:`Filamento Baixo`,maintenance:`Manutenção`,amsHumidity:`Umidade do AMS`,amsTemp:`Temp. do AMS`,amsDryingSuspended:`Secagem suspensa`,amsHtHumidity:`Umidade do AMS-HT`,amsHtTemp:`Temp. do AMS-HT`,bedCooled:`Mesa Resfriada`,firstLayer:`Primeira camada`,quiet:`Silencioso`,digest:`Resumo {{time}}`,printStarted:`Impressão Iniciada`,plateNotEmpty:`Mesa Não Vazia`,plateNotEmptyDescription:`Objetos detectados antes da impressão`,plateClearRequired:`Confirmar mesa livre`,plateClearRequiredDescription:`Impressão concluída, a fila aguarda confirmação`,plateClear:`Mesa livre`,printCompleted:`Impressão Concluída`,bedCooledLabel:`Mesa Resfriada`,bedCooledDescription:`Mesa resfriou abaixo do limite após a impressão`,firstLayerCompleteLabel:`Primeira camada concluída`,firstLayerCompleteDescription:`Notificar com foto quando a primeira camada terminar`,missingSpoolAssignmentLabel:`Atribuição de bobina ausente`,billingChargeFailedLabel:`Falha na cobrança`,billingChargeFailedDescription:`Notificar quando os custos de impressão não puderem ser registrados`,missingSpoolAssignmentDescription:`Notificar quando a impressão iniciar e bandejas necessárias não tiverem bobina atribuída`,printFailed:`Impressão Falhou`,printStopped:`Impressão Parada`,progressMilestones:`Marcos de Progresso`,progressMilestonesDescription:`Notificar em 25%, 50%, 75%`,printerOffline:`Impressora Offline`,printerError:`Erro da Impressora`,aiFailureDetection:`Detecção de Falhas por IA`,aiFailureDetectionDescription:`Notificar quando a IA do Obico detectar uma possível falha de impressão`,lowFilamentLabel:`Filamento Baixo`,maintenanceDue:`Manutenção Necessária`,maintenanceDueDescription:`Notificar quando manutenção for necessária`,amsHumidityHigh:`Umidade Alta do AMS`,amsHumidityHighDescription:`Umidade do AMS regular excede o limite`,amsTemperatureHigh:`Temperatura Alta do AMS`,amsTemperatureHighDescription:`Temperatura do AMS regular excede o limite`,amsDryingSuspendedTitle:`Secagem automática suspensa`,amsDryingSuspendedDescription:`A secagem automática desistiu de uma unidade AMS porque a umidade nunca ficou abaixo do limite`,amsHtHumidityHigh:`Umidade Alta do AMS-HT`,amsHtHumidityHighDescription:`Umidade do AMS-HT excede o limite`,amsHtTemperatureHigh:`Temperatura Alta do AMS-HT`,amsHtTemperatureHighDescription:`Temperatura do AMS-HT excede o limite`,inventoryAlerts:`Alertas de Estoque`,stockReorderAlert:`Alerta de Reposição`,stockReorderAlertDescription:`O SKU atingiu seu ponto de reposição`,stockBreakAlert:`Alerta de Ruptura de Estoque`,stockBreakAlertDescription:`O estoque se esgotará antes da chegada do reabastecimento`,jobAdded:`Trabalho Adicionado`,jobAddedDescription:`Trabalho adicionado à fila`,jobAssigned:`Trabalho Atribuído`,jobAssignedDescription:`Trabalho baseado em modelo atribuído à impressora`,jobStarted:`Trabalho Iniciado`,jobStartedDescription:`Trabalho da fila começou a imprimir`,jobWaiting:`Trabalho Aguardando`,jobWaitingDescription:`Trabalho aguardando filamento ou impressora`,jobSkipped:`Trabalho Pulado`,jobSkippedDescription:`Trabalho pulado (anterior falhou)`,jobFailed:`Trabalho Falhou`,jobFailedDescription:`Trabalho falhou ao iniciar`,queueComplete:`Fila Concluída`,queueCompleteDescription:`Todos os trabalhos da fila finalizados`,quietHours:`Horário de Silêncio`,noNotificationsDuring:`Sem notificações durante essas horas`,editProviderToChangeQuietHours:`Edite o provedor para alterar o horário de silêncio`,dailyDigest:`Resumo Diário`,batchNotifications:`Agrupar notificações em um único resumo diário`,sendAt:`Enviar às {{time}}`,editProviderToChangeDigestTime:`Edite o provedor para alterar o horário do resumo`,edit:`Editar`,deleteProvider:`Excluir Provedor de Notificação`,deleteConfirm:`Tem certeza que deseja excluir "{{name}}"? Isso não pode ser desfeito.`,delete:`Excluir`,addTitle:`Adicionar Provedor de Notificação`,editTitle:`Editar Provedor de Notificação`,nameLabel:`Nome *`,namePlaceholder:`Minhas Notificações`,providerTypeLabel:`Tipo de Provedor *`,configuration:`Configuração`,testConfiguration:`Testar Configuração`,printerFilter:`Filtro de Impressora`,onlyFromPrinter:`Enviar notificações apenas para eventos desta impressora`,quietHoursDnd:`Horário de Silêncio (Não Perturbe)`,quietStart:`Início`,quietEnd:`Fim`,dailyDigestLabel:`Resumo Diário`,sendDigestAt:`Enviar resumo às`,digestCollected:`Os eventos serão coletados e enviados como um único resumo neste horário`,notificationEvents:`Eventos de Notificação`,progressPercent:`(25%, 50%, 75%)`,bedCooledAfterPrint:`(após conclusão da impressão)`,haSensorAlert:`Alerta de sensor de impressora`,haSensorAlertDescription:`(um sensor do Home Assistant vinculado precisa de atenção)`,locationHaSensorAlert:`Alerta de sensor de local`,locationHaSensorAlertDescription:`(um sensor do Home Assistant vinculado a um local de armazenamento precisa de atenção)`,eventPriority:{sectionTitle:`Prioridade ntfy`,helpNtfy:`Escolha uma prioridade para cada evento habilitado. O ntfy usa isso para escalar alertas (som, visibilidade, comportamento push). Níveis não definidos aqui usam o padrão do servidor ntfy.`,min:`Mín`,low:`Baixa`,default:`Padrão`,high:`Alta`,urgent:`Urgente`},cancel:`Cancelar`,save:`Salvar`,add:`Adicionar`,nameRequired:`Nome é obrigatório`,fieldRequired:`{{field}} é obrigatório`,haDataInvalid:`O campo Data deve ser um objeto JSON válido, por ex. {"priority": "high", "ttl": 0}`,phoneNumber:`Número de Telefone`,apiKey:`Chave da API`,serverUrl:`URL do Servidor`,topic:`Tópico`,authToken:`Token de Autenticação`,userKey:`Chave do Usuário`,appToken:`Token do Aplicativo`,priority:`Prioridade`,pushoverRetry:`Repetição de emergência (s)`,pushoverExpire:`Expiração de emergência (s)`,botToken:`Token do Bot`,chatId:`ID do Chat`,telegramThreadId:`ID do tópico do fórum`,telegramThreadIdHelp:`Opcional. Envia para um único tópico de um grupo de fórum: o último número no link do tópico (t.me/c/.../25). Deixe vazio para o tópico Geral.`,telegramThreadIdInvalid:`O ID do tópico do fórum deve ser um número.`,smtpServer:`Servidor SMTP`,smtpPort:`Porta SMTP`,security:`Segurança`,authentication:`Autenticação`,username:`Usuário`,password:`Senha`,fromEmail:`E-mail de Origem`,toEmail:`E-mail de Destino`,webhookUrl:`URL do Webhook`,payloadFormat:`Formato do Payload`,authorization:`Autorização`,titleFieldName:`Nome do Campo de Título`,messageFieldName:`Nome do Campo de Mensagem`,editTemplate:`Editar Modelo: {{name}}`,titleLabel:`Título`,bodyLabel:`Corpo`,titlePlaceholder:`Título da notificação...`,bodyPlaceholder:`Corpo da notificação...`,availableVariables:`Variáveis Disponíveis`,clickToInsert:`Clique para inserir na posição do cursor no corpo`,livePreview:`Pré-visualização ao Vivo`,hide:`Ocultar`,show:`Mostrar`,loadingPreview:`Carregando pré-visualização...`,enterTemplateContent:`Insira o conteúdo do modelo para ver a pré-visualização`,titlePreview:`Título:`,bodyPreview:`Corpo:`,resetToDefault:`Restaurar Padrão`,titleRequired:`Título é obrigatório`,bodyRequired:`Corpo é obrigatório`,notificationLog:`Registro de Notificações`,showFailedOnly:`Apenas falhas`,last24Hours:`Últimas 24 horas`,last7Days:`Últimos 7 dias`,last30Days:`Últimos 30 dias`,last90Days:`Últimos 90 dias`,justNow:`Agora mesmo`,noFailedNotifications:`Nenhuma notificação com falha`,noNotificationsLogged:`Nenhuma notificação registrada`,unknownProvider:`Provedor Desconhecido`,logTitle:`Título`,logMessage:`Mensagem`,logError:`Erro`,logProvider:`Provedor: {{type}}`,logTime:`Hora: {{time}}`,refresh:`Atualizar`,clearOld:`Limpar Antigos`,statsSummary:`Últimos {{days}} dias:`,statsNotifications:`notificações`,statsSent:`{{count}} enviadas`,statsFailed:`{{count}} com falha`,eventTypes:{print_start:`Impressão Iniciada`,print_complete:`Impressão Concluída`,print_failed:`Impressão Falhou`,print_stopped:`Impressão Parada`,print_progress:`Progresso`,printer_offline:`Impressora Offline`,printer_error:`Erro da Impressora`,filament_low:`Filamento Baixo`,maintenance_due:`Manutenção Necessária`,test:`Teste`},userEmail:{title:`Notificações`,emailNotifications:`Notificações por E-mail`,emailNotificationsDesc:`Receba notificações por e-mail para seus próprios trabalhos de impressão. Os e-mails são enviados usando as configurações SMTP definidas na Autenticação Avançada.`,sendingTo:`As notificações serão enviadas para`,noEmailWarning:`Sua conta não tem um endereço de e-mail. Entre em contato com um administrador para adicionar um.`,printJobNotifications:`Notificações de Trabalhos de Impressão`,printJobNotificationsDesc:`Escolha quais eventos acionam notificações por e-mail para os trabalhos de impressão que você envia.`,printJobStarts:`Início do Trabalho de Impressão`,printJobStartsDesc:`Ser notificado quando seu trabalho de impressão começar.`,printJobFinishes:`Conclusão do Trabalho de Impressão`,printJobFinishesDesc:`Ser notificado quando seu trabalho de impressão concluir com sucesso.`,printErrors:`Erros de Impressão`,printErrorsDesc:`Ser notificado quando seu trabalho de impressão falhar ou encontrar um erro.`,printJobStops:`Trabalho de Impressão Parado`,printJobStopsDesc:`Ser notificado quando seu trabalho de impressão for cancelado ou parado.`,saveSuccess:`Preferências de notificação salvas.`,saveError:`Falha ao salvar preferências de notificação.`}},richTextEditor:{bold:`Negrito`,italic:`Itálico`,underline:`Sublinhado`,bulletList:`Lista com marcadores`,numberedList:`Lista numerada`,alignLeft:`Alinhar à esquerda`,alignCenter:`Centralizar`,alignRight:`Alinhar à direita`,addLink:`Adicionar link`,removeLink:`Remover link`},externalLinks:{title:`Links da barra lateral`,sidebarLayout:`Barra lateral`,sidebarLayoutDescription:`Mostre ou oculte páginas integradas, adicione links externos e arraste itens para reordenar a navegação lateral.`,systemPages:`Páginas do Bambuddy`,externalLinks:`Links externos`,visibleInSidebar:`Visível na barra lateral`,hiddenFromSidebar:`Oculto na barra lateral`,requiredInSidebar:`Obrigatório na barra lateral`,hidePage:`Ocultar página`,showPage:`Mostrar página`,settingsCannotBeHidden:`Configurações não pode ser ocultado`,noLinksConfigured:`Nenhum link externo configurado`,deleteLink:`Excluir link`,removeCustomIcon:`Remover ícone personalizado`,openInNewTab:`Abrir em nova aba`,placeholders:{linkName:`Meu Link`}},keyboardShortcuts:{title:`Atalhos de Teclado`,navigation:`Navegação`,archivesSection:`Arquivos`,kProfilesSection:`Perfis K`,generalSection:`Geral`,shortcuts:{goToPrinters:`Ir para Impressoras`,goToArchives:`Ir para Arquivos`,goToQueue:`Ir para Fila`,goToStats:`Ir para Estatísticas`,goToProfiles:`Ir para Perfis na Nuvem`,goToSettings:`Ir para Configurações`,focusSearch:`Focar na pesquisa`,openUploadModal:`Abrir modal de upload`,clearSelection:`Limpar seleção / desfocar input`,contextMenu:`Menu de contexto nos cartões`,refreshProfiles:`Atualizar perfis`,newProfile:`Novo perfil`,exitSelectionMode:`Sair do modo de seleção`,showHelp:`Mostrar esta ajuda`},footer:`Pressione Esc ou clique fora para fechar`},notificationLog:{title:`Registro de Notificações`,events:{printStarted:`Impressão Iniciada`,printComplete:`Impressão Concluída`,printFailed:`Impressão Falhou`,printStopped:`Impressão Interrompida`,progress:`Progresso`,printerOffline:`Impressora Offline`,printerError:`Erro na Impressora`,lowFilament:`Filamento Baixo`,maintenanceDue:`Manutenção Pendente`,test:`Teste`},timeAgo:{justNow:`Agora mesmo`,minutesAgo:`há {{minutes}} minutos`,hoursAgo:`há {{hours}} horas`}},restoreBackup:{title:`Restaurar Backup`,restoring:`Restaurando...`,restoreComplete:`Restauração Concluída`,restoreFailed:`Falha na Restauração`,importSettings:`Importar configurações de um arquivo de backup`,pleaseWait:`Aguarde enquanto seus dados estão sendo restaurados`,clickToSelect:`Clique para selecionar o arquivo de backup (.json ou .zip)`,howDuplicateHandling:`Como funciona o tratamento de duplicatas:`,categories:{printers:`Impressoras`,smartPlugs:`Tomadas Inteligentes`,notificationProviders:`Provedores de Notificação`,filaments:`Filamentos`,archives:`Arquivos`,pendingUploads:`Uploads Pendentes`,settingsTemplates:`Configurações e Modelos`},matchingInfo:{printers:`correspondem pelo número de série`,smartPlugs:`correspondem pelo endereço IP`,notificationProviders:`correspondem pelo nome`,filaments:`correspondem pelo nome + tipo + marca`,archives:`correspondem pelo hash do conteúdo`,pendingUploads:`correspondem pelo nome do arquivo`,settingsTemplates:`sempre sobrescrito`},replaceExisting:`Substituir dados existentes`,keepExisting:`Manter dados existentes`,replaceDescription:`Substituir itens que já existem com os dados do backup`,keepDescription:`Restaurar apenas itens que não existem`,caution:`Atenção:`,cautionText:`Sobrescrever substituirá suas configurações atuais pelos dados do backup. Os códigos de acesso da impressora nunca são sobrescritos por segurança.`,itemsRestored:`Itens Restaurados`,itemsSkipped:`Itens Ignorados`,restored:`Restaurado`,skipped:`Ignorado (já existe)`,filesLabel:`Arquivos (3MF, miniaturas, etc.)`,newApiKeysGenerated:`Novas Chaves API Geradas`,newApiKeysWarning:`Essas chaves são exibidas apenas uma vez. Copie-as agora!`,processingBackup:`Processando arquivo de backup...`,noDataFound:`Nenhum dado foi encontrado para restaurar no arquivo de backup.`,failedToRestore:`Falha ao restaurar o backup. Verifique o formato do arquivo.`},backupExport:{title:`Exportar Backup`,selectData:`Selecione os dados a incluir`,selectAll:`Selecionar Todos`,selectNone:`Selecionar Nenhum`,categoryDescriptions:{settings:`Idioma, tema, preferências de atualização`,notifications:`ntfy, Pushover, Discord, etc.`,templates:`Modelos de mensagens personalizadas`,smartPlugs:`Configurações de tomadas Tasmota`,externalLinks:`Links da barra lateral para serviços externos`,printers:`Informações da impressora (códigos de acesso excluídos)`,plateDetection:`Imagens de referência de placa vazia`,filaments:`Tipos e custos de filamento`,maintenance:`Cronogramas de manutenção personalizados`,archives:`Todos os dados de impressão + arquivos (3MF, miniaturas, fotos)`,projects:`Projetos, itens de BOM e anexos`,pendingUploads:`Uploads de impressora virtual aguardando revisão`,apiKeys:`Chaves API de webhook (novas chaves geradas na importação)`},requiresPrinters:`Requer que as impressoras sejam selecionadas`,zipFileWarning:`Um arquivo ZIP será criado.`,zipFileDescription:`Inclui todos os arquivos 3MF, miniaturas, timelapses e fotos. Isso pode levar algum tempo e resultar em um arquivo grande.`,includeAccessCodes:`Incluir Códigos de Acesso`,includeAccessCodesDescription:`Para transferir para outra máquina`,includeAccessCodesWarning:`Os códigos de acesso serão incluídos em texto simples. Mantenha este arquivo de backup seguro!`,categoriesSelected:`{{selectedCount}} categorias selecionadas`},pendingUploads:{placeholders:{notes:`Adicione notas sobre esta impressão...`},discardUpload:`Descartar Upload`,archiveAllUploads:`Arquivar Todos os Uploads`,discardAllUploads:`Descartar Todos os Uploads`,archive:`Arquivar`,timeAgo:{justNow:`Agora mesmo`,minutesAgo:`há {{minutes}} minutos`,hoursAgo:`há {{hours}} horas`,daysAgo:`há {{days}} dias`}},apiBrowser:{placeholders:{requestBody:`Corpo da requisição JSON...`,searchEndpoints:`Pesquisar endpoints...`}},configureAmsSlot:{title:`Configurar Slot AMS`,slotConfigured:`Slot Configurado!`,configuringSlot:`Configurando slot:`,slotLabel:`{{ams}} – Slot {{slot}}`,searchPresets:`Pesquisar predefinições...`,colorPlaceholder:`Nome da cor ou hex (ex.: marrom, FF8800)`,clearCustomColor:`Limpar cor personalizada`,noCloudPresets:`Nenhuma predefinição na nuvem. Faça login no Bambu Cloud para sincronizar.`,noPresetsAvailable:`Nenhuma predefinição disponível. Faça login no Bambu Cloud ou importe perfis locais.`,noMatchingPresets:`Nenhuma predefinição correspondente encontrada.`,custom:`Personalizado`,builtin:`Integrado`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Configurações enviadas para a impressora`,filamentProfile:`Perfil de Filamento`,kProfileLabel:`Perfil K (Avanço de Pressão)`,filteringFor:`Filtrando por: {{material}}`,noKProfile:`Nenhum perfil K (usar padrão 0.020)`,noMatchingKProfiles:`Nenhum perfil K correspondente encontrado. O K padrão=0.020 será usado.`,otherKProfiles:`Outros perfis K nesta impressora`,selectFilamentFirst:`Selecione um perfil de filamento primeiro`,kFromCalibration:`K={{value}} da calibração da impressora`,customColorLabel:`Cor Personalizada (opcional)`,presetColors:`Cores de {{name}}:`,showLessColors:`Mostrar menos cores`,showMoreColors:`Mostrar mais cores`,clear:`Limpar`,hexLabel:`Hex – #{{hex}}`,resetting:`Redefinindo...`,resetSlot:`Redefinir Slot`,cancel:`Cancelar`,configuring:`Configurando...`,configureSlot:`Configurar Slot`},githubBackup:{title:`Backup do Git`,history:`Histórico`,downloadBackup:`Baixar Backup`,restoreBackup:`Restaurar Backup`,noBackupsYet:`Nenhum backup ainda`},emailSettings:{placeholders:{fromName:`Bambuddy`}},tagManagement:{searchTags:`Pesquisar tags...`,renameTag:`Renomear tag`,deleteTag:`Excluir tag`},notificationTemplates:{placeholders:{title:`Título da notificação...`,body:`Corpo da notificação...`}},batchTag:{placeholders:{newTag:`Digite uma nova tag...`}},photoGallery:{deletePhoto:`Excluir foto`},filamentHoverCard:{copySpoolUuid:`Copiar UUID do carretel`},kProfilesView:{hasNote:`Possui nota`,copyProfile:`Copiar perfil`},layout:{openMenu:`Abrir menu`,noPermissionSystemInfo:`Você não tem permissão para visualizar informações do sistema`},dashboard:{dragToReorder:`Arrastar para reordenar`,hideWidget:`Ocultar widget`},notificationProviderCard:{deleteNotificationProvider:`Excluir provedor de notificação`},fileManagerModal:{closeFileManager:`Fechar gerenciador de arquivos`,sortFiles:`Ordenar arquivos`,goToParentFolder:`Ir para a pasta pai`,threeView:`Visualização 3D`},embeddedCameraViewer:{refreshStream:`Atualizar stream`,close:`Fechar`,zoomOut:`Reduzir zoom`,resetZoom:`Redefinir zoom`,zoomIn:`Aumentar zoom`,dragToResize:`Arrastar para redimensionar`},timelapseViewer:{skipBack5s:`Voltar 5s`,skipForward5s:`Avançar 5s`},notificationProviders:{descriptions:{email:`Notificações por email SMTP`,telegram:`Notificações via bot do Telegram`,discord:`Enviar para canal do Discord via webhook`,ntfy:`Notificações push gratuitas e auto-hospedáveis`,pushover:`Notificações push simples e confiáveis`,callmebot:`Notificações gratuitas via WhatsApp pelo CallMeBot`,webhook:`POST HTTP genérico para qualquer URL`}},logViewer:{searchPlaceholder:`Pesquisar mensagem ou nome do logger...`,noLogEntries:`Nenhuma entrada de log encontrada`},switchbarPopover:{noSwitchesInSwitchbar:`Nenhum switch na barra de switches`},projectPageModal:{placeholders:{title:`Título`,designer:`Designer`,license:`Licença`,description:`Digite a descrição...`,profileTitle:`Título do perfil`,profileDescription:`Descrição do perfil...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`Aguardando`,justNow:`Agora mesmo`,now:`Agora`,minsAgo:`{{count}}min atrás`,inMins:`em {{count}}min`,hoursAgo:`{{count}}h atrás`,inHours:`em {{count}}h`,daysAgo:`{{count}}d atrás`,inDays:`em {{count}}d`},spoolbuddy:{nav:{dashboard:`Painel`,ams:`AMS`,inventory:`Inventário`,writeTag:`Escrever`,settings:`Configurações`},status:{nfcReady:`NFC pronto`,nfcOff:`NFC desligado`,offline:`Offline`,online:`Online`,noPrinters:`Sem impressoras`,deviceOffline:`Dispositivo offline`,waitingConnection:`Aguardando conexão do dispositivo...`,systemReady:`Sistema pronto`,status:`Status`},dashboard:{readyToScan:`Pronto para escanear`,idleMessage:`Coloque um carretel na balança para identificá-lo`,nfcHint:`A tag NFC será lida automaticamente`,device:`Dispositivo`,syncWeight:`Sincronizar peso`,weightSynced:`Sincronizado!`,unknownTag:`Tag desconhecida`,newTag:`Nova tag detectada`,onScale:`na balança`,linkSpool:`Vincular ao carretel`,linkTagTitle:`Vincular tag ao carretel`,linkTag:`Vincular tag`,selectSpool:`Selecione um carretel para vincular a esta tag:`,noUntagged:`Nenhum carretel sem tag encontrado`,tagDetected:`Tag detectada`,noTag:`Sem tag`,tagId:`Etiqueta`,grossWeight:`Peso bruto`,spoolSize:`Tamanho do carretel`,close:`Fechar`,currentSpool:`Carretel Atual`,plateReady:`Mesa pronta: {{name}}`,plateReadyLabel:`Mesas para liberar`,plateClearAction:`Liberar`,plateClearedToast:`Mesa marcada como limpa`,plateClearFailed:`Não foi possível marcar a mesa como limpa`},modal:{spoolDetected:`Carretel Detectado`,assignToAms:`Atribuir ao AMS`,syncWeight:`Sincronizar Peso`,weightSynced:`Sincronizado!`,syncing:`Sincronizando...`,newTagDetected:`Nova Tag Detectada`,addToInventory:`Adicionar ao Inventário`,assignToAmsTitle:`Atribuir ao AMS`,selectSlot:`Selecionar um slot`,assign:`Atribuir`,assigning:`Atribuindo...`,assignSuccess:`Atribuído!`,assignPendingInsert:`Atribuído. O slot será configurado quando você inserir o carretel.`,assignError:`Falha ao atribuir carretel. Tente novamente.`,noPrinterSelected:`Selecionar uma impressora...`,noAmsDetected:`Nenhum AMS detectado nesta impressora`,slot:`Slot`},weight:{noReading:`Sem leitura`,stable:`Estável`,measuring:`Medindo...`,tare:`Tarar`,calibrate:`Calibrar`},spool:{remaining:`Restante`,material:`Material`,brand:`Marca`,color:`Cor`,coreWeight:`Núcleo`,labelWeight:`Rótulo`,scaleWeight:`Balança`,netWeight:`Líquido`,lastUsed:`Último uso`,unknownColor:`Cor desconhecida`},ams:{noData:`Nenhum AMS detectado`,connectAms:`Conecte um AMS para ver os slots`,noPrinter:`Nenhuma impressora selecionada`,selectPrinter:`Selecione uma impressora na barra superior`,printerDisconnected:`Impressora desconectada`,humidity:`Umidade`,level:`Nível`,active:`Ativo`,slot:`Slot`,empty:`Vazio`},inventory:{search:`Buscar carretéis...`,empty:`Nenhum carretel no inventário`,noResults:`Nenhum carretel correspondente`,spools:`carretéis`,addSpool:`Adicionar carretel`},settings:{tabDevice:`Dispositivo`,tabDisplay:`Tela`,tabScale:`Balança`,tabUpdates:`Atualizações`,nfcReader:`Leitor NFC`,type:`Tipo`,connection:`Conexão`,notConnected:`N/D`,deviceInfo:`Info do dispositivo`,hostname:`Host`,uptime:`Tempo de atividade`,brightness:`Brilho`,saved:`Salvo`,noBacklight:`Nenhuma retroiluminação DSI detectada. O controle de brilho requer uma tela DSI.`,screenBlank:`Tempo para desligar tela`,screenBlankDesc:`A tela desliga após inatividade. Toque para despertar.`,displayNote:`O brilho é aplicado como filtro de software.`,scaleCalibration:`Calibração da balança`,currentWeight:`Peso atual`,tareOffset:`Tara`,calFactor:`Fator`,knownWeight:`Peso conhecido`,calStep1:`Remova todos os itens da balança e pressione Definir zero.`,calStep2:`Coloque o peso conhecido na balança.`,setZero:`Definir zero`,calibrateNow:`Calibrar`,calibrated:`Calibrado`,tareSet:`Comando de tara enviado. Aguardando dispositivo...`,tareComplete:`Tara concluída!`,tareTimedOut:`Tempo esgotado para a tara — o daemon do SpoolBuddy está em execução?`,tareFailed:`Falha ao enviar comando de tara`,zeroSet:`Ponto zero definido. Coloque o peso conhecido na balança.`,calibrationDone:`Calibração concluída!`,calibrationFailed:`Falha na calibração`,lastCalibrated:`Última calibração`,stable:`Estável`,settling:`Estabilizando...`,firmware:`Firmware`,scale:`Balança`,noDevice:`Nenhum dispositivo SpoolBuddy encontrado`,daemonVersion:`Versão do daemon`,currentVersion:`Atual`,versionPending:`Aguardando daemon...`,checking:`Verificando...`,checkUpdates:`Verificar atualizações`,updateAvailable:`Atualização disponível`,updateInstructions:`Atualize via SSH: execute o script de instalação do SpoolBuddy.`,upToDate:`Atualizado`,includeBeta:`Incluir versões beta`,systemConfig:`Backend e autenticação`,backendUrl:`URL do backend Bambuddy`,apiToken:`Token de API`,apiTokenPlaceholder:`Insira o token de API`,saveConfig:`Salvar configuração`,systemQueued:`Configuração enfileirada.`,systemFieldsRequired:`URL do backend é obrigatória.`,nfcDiagnostic:`Diagnóstico NFC`,scaleDiagnostic:`Diagnóstico da balança`,readTagDiagnostic:`Diagnóstico de leitura de tag`,testNfc:`Testar leitor`,testScale:`Testar precisão`,testReadTag:`Ler tag`},writeTag:{tabExisting:`Bobina existente`,tabNew:`Nova bobina`,tabReplace:`Substituir tag`,searchPlaceholder:`Buscar por material, cor, marca...`,noUntaggedSpools:`Nenhuma bobina sem tag`,noTaggedSpools:`Nenhuma bobina com tag`,selectSpool:`Selecione uma bobina e coloque um NTAG no leitor`,placeTag:`Coloque um NTAG no leitor`,tagReady:`Tag detectado — pronto para gravar`,writeTag:`Gravar Tag`,replaceTag:`Substituir Tag`,writing:`Gravando tag...`,waiting:`Aguardando SpoolBuddy...`,writeSuccess:`Tag gravado com sucesso!`,writeFailed:`Falha na gravação`,queueFailed:`Falha ao enfileirar comando de gravação`,tryAgain:`Tentar novamente`,cancel:`Cancelar`,replaceWarning:`O tag antigo será desvinculado. O novo tag o substituirá.`,deviceOffline:`SpoolBuddy está offline`,material:`Material`,colorName:`Nome da cor`,color:`Cor`,brand:`Marca`,weight:`Peso (g)`,createSpool:`Criar bobina`,creating:`Criando...`,spoolCreated:`Bobina criada! Pronto para gravar.`,createFailed:`Falha ao criar bobina`,incompleteDataWarning:`Tag gravada com dados Spoolman incompletos`},quickMenu:{printerPower:`Energia da impressora`,systemControls:`Sistema`,restartDaemon:`Reiniciar daemon`,restartBrowser:`Reiniciar navegador`,reboot:`Reiniciar`,shutdown:`Desligar`,swipeToClose:`Deslize para baixo para fechar`,confirmTitle:`Confirmar`,confirmShutdown:`Tem certeza de que deseja desligar o SpoolBuddy? Você precisará de acesso físico para ligá-lo novamente.`,confirmReboot:`Tem certeza de que deseja reiniciar o SpoolBuddy?`,confirmRestartDaemon:`Reiniciar o daemon do SpoolBuddy? NFC e balança ficarão temporariamente indisponíveis.`,confirmRestartBrowser:`Reiniciar o navegador kiosk? A tela ficará brevemente preta.`,confirm:`Confirmar`,confirmPlugOn:`Ligar {{name}}?`,confirmPlugOff:`Desligar {{name}}?`,turnOn:`Ligar`,turnOff:`Desligar`}},diagnostic:{modalTitle:`Diagnóstico de conexão — {{name}}`,running:`Executando diagnóstico...`,runningElapsed:`Executando diagnóstico... ({{elapsed}}s)`,waitingForReportHint:`Aguardando a impressora publicar um relatório de status — pode levar até {{max}} segundos.`,runFailed:`Não foi possível executar o diagnóstico: {{error}}`,retry:`Executar novamente`,runButton:`Executar diagnóstico`,sectionTitle:`Diagnóstico de conexão`,sectionDescription:`Verifique por que uma impressora não conecta ou não imprime — acessibilidade das portas, modo desenvolvedor LAN, modo de rede Docker e credenciais.`,noPrinters:`Nenhuma impressora configurada.`,overall:{ok:`Nenhum problema encontrado — a conexão da impressora parece saudável.`,warnings:`A impressora deve funcionar, mas alguns pontos exigem atenção.`,problems:`Foram encontrados problemas que explicam por que a impressora não conecta ou não imprime.`},check:{port_mqtt:{title:`Porta de controle (MQTT 8883)`,pass:`Acessível — a impressora está aceitando conexões de controle.`,fail:`A porta 8883 está inacessível. A impressora está desligada, em outro endereço IP, ou um firewall está bloqueando. Verifique o IP da impressora e se nada bloqueia a porta 8883.`},port_ftps:{title:`Porta de transferência de arquivos (FTPS 990)`,pass:`Acessível — o envio de arquivos de impressão funcionará.`,warn:`A porta 990 está inacessível. O monitoramento ainda pode funcionar, mas o envio de impressões para a impressora falhará. Verifique se a porta 990 não está bloqueada.`,warn_no_tls:`A porta 990 está aberta, mas o serviço de arquivos da impressora não conclui o handshake TLS. Os arquivos de impressão, as capas e os timelapses não podem ser obtidos, então os arquivos ficam vazios. Reinicie a impressora — desbloquear a porta não resolve.`},external_storage:{title:`Armazenar arquivos enviados no armazenamento externo (passo 4 da instalação)`,pass:`A impressora informa que esta opção está ligada — os arquivos enviados serão armazenados no cartão SD e os arquivos terão miniaturas e metadados do fatiador.`,fail:`A impressora informa que esta opção está desligada. Ative "Armazenar arquivos enviados no armazenamento externo" — em firmwares recentes (P2S 01.02 / Bambu Studio 2.6+) o interruptor fica nas Configurações de Impressão da impressora; em versões mais antigas, está na aba Dispositivo do Bambu Studio / OrcaSlicer. Sem essa opção, cada impressão arquivada fica sem miniatura nem metadados do fatiador.`,skip:`Não verificado — é necessária uma conexão MQTT ativa. Em fatiadores mais antigos onde essa configuração existe apenas no fatiador, a impressora não a reporta, então esta verificação passa mesmo com a opção desligada — verifique o passo 4 da instalação manualmente.`,skip_unsupported_model:`Este modelo tem slot SD mas nenhuma forma de ativar a opção — o firmware atual da série P1 não mostra o botão no Bambu Studio e a impressora não tem tela. Não há nada a corrigir aqui; as impressões arquivadas podem ficar sem miniaturas e metadados do fatiador até que a Bambu Lab adicione suporte por firmware.`,fail_no_media:`A opção está ligada, mas a impressora não detecta cartão nem pendrive no slot, então os arquivos enviados não têm para onde ir. Insira um e imprima novamente — até lá, toda impressão arquivada ficará sem miniatura e sem metadados do fatiador.`,warn_internal_storage:`A opção está ligada e há armazenamento presente, mas a última impressão ainda assim foi para o armazenamento interno da impressora, que o Bambuddy não consegue ler. Na série H2, na P2S e na X2D o botão «Imprimir» do Bambu Studio sempre envia para lá, independentemente desta opção. As impressões são arquivadas com nome e tempos, mas sem miniatura nem metadados do fatiador. Para arquivos completos, inicie as impressões pelo Bambuddy ou fatie no OrcaSlicer, ou então no Bambu Studio use «Enviar» com «Externo» e inicie a impressão depois.`,warn_internal_history:`A opção está ligada e há armazenamento, mas a última impressão saiu de um arquivo que já estava na impressora: uma reimpressão pela tela dela, um início pelo Handy ou um arquivo enviado antes. Essa biblioteca fica no armazenamento interno, que o Bambuddy não consegue ler, e nenhuma opção muda isso, porque nada foi enviado para essa impressão. Ela continua arquivada com nome e tempos, mas sem miniatura nem metadados do fatiador. Para arquivos completos, inicie as impressões pelo Bambuddy ou envie-as pelo fatiador.`},port_rtsps:{title:`Porta da câmera ({{protocol}} {{port}})`,pass:`Acessível — o streaming da câmera funcionará.`,warn:`A porta {{port}} está inacessível. A visualização ao vivo da câmera não funcionará. Isso não afeta a impressão.`},macos_local_network:{title:`Permissão de rede local do macOS`,pass:`O macOS está permitindo que o Bambuddy alcance a rede local.`,warn_unsigned:`O Python que executa o Bambuddy não tem assinatura de código, então o macOS não tem a que vincular a permissão de rede local e descarta silenciosamente todas as conexões com a impressora — sem erro e sem solicitação. Execute o atualizador do Bambuddy (install/update_macos.sh), que faz a assinatura, e reinicie o Bambuddy. Interpretador: {{executable}}`,warn_permission:`Se a impressora estiver ligada e acessível neste endereço, abra Ajustes do Sistema > Privacidade e Segurança > Rede Local e verifique se o Python do Bambuddy está ativado. Caso contrário, o macOS descarta conexões locais em silêncio, e atualizar o Python pode deixar a permissão antiga para trás.`},network_mode:{title:`Modo de rede do contêiner`,genericRuntime:`um contêiner`,pass:`Executando em {{runtime}} com rede host.`,warn:`O Bambuddy está sendo executado em {{runtime}} com rede bridge. A descoberta de impressoras e a impressora virtual precisam da rede host — recrie o contêiner com rede host ("network_mode: host" no docker-compose, "--network=host" no Podman).`,skip:`Não está sendo executado em um contêiner — não aplicável.`,skip_unknown:`O Bambuddy está sendo executado em {{runtime}}, mas não foi possível determinar o modo de rede. Se a descoberta de impressoras ou a impressora virtual não funcionarem, recrie o contêiner com rede host.`,skip_system_container:`O Bambuddy está sendo executado em um contêiner de sistema {{runtime}}, que fica na LAN como uma máquina virtual — não aplicável.`},subnet:{title:`Sub-rede`,pass:`A impressora e o Bambuddy estão na mesma sub-rede.`,warn:`A impressora ({{printer_ip}}) e o Bambuddy ({{host_ip}}) estão em sub-redes diferentes. Eles podem não se alcançar, a menos que o roteamento entre as sub-redes esteja configurado.`,skip:`Não foi possível determinar a sub-rede — ignorado.`},mqtt_auth:{title:`Credenciais da impressora`,pass:`A impressora aceitou a conexão.`,fail:`A impressora está acessível mas o Bambuddy não está conectado a ela. O código de acesso ou o número de série provavelmente está incorreto — o código de acesso muda toda vez que o modo Somente LAN ou o Modo Desenvolvedor é alternado, então copie-o novamente da tela da impressora. Uma impressora reiniciando, ou que já atingiu seu limite de conexões simultâneas, aparece do mesmo jeito.`,fail_auth_rejected:`A impressora recusou as credenciais do Bambuddy. O código de acesso ou o número de série está incorreto — o código de acesso muda toda vez que o modo Somente LAN ou o Modo Desenvolvedor é alternado. Copie-o novamente da tela da impressora e salve-o nas configurações da impressora.`,skip:`Não verificado — não foi possível alcançar a impressora.`},developer_mode:{title:`Modo Desenvolvedor LAN`,pass:`O Modo Desenvolvedor está ativado.`,fail:`O Modo Desenvolvedor está DESLIGADO na impressora. Ative-o nas configurações de LAN da impressora — e confirme com OK. Sem ele, as impressões não iniciarão.`,skip:`Não foi possível verificar — requer uma conexão ativa com a impressora.`},printer_publishing:{title:`Impressora publicando status`,pass:`A impressora está publicando atualizações de status — AMS, filamentos e perfis K serão espelhados corretamente para o slicer.`,fail:`O broker MQTT aceitou a conexão, mas a impressora não publicou nenhum relatório de status. Quase sempre é um número de série errado ou com maiúsculas/minúsculas incorretas — o tópico device/<serial>/report diferencia maiúsculas de minúsculas. Verifique o número de série nas configurações da impressora comparando com a tela do equipamento.`,skip:`Não foi possível verificar — requer uma conexão ativa com a impressora.`}}},systemHealth:{sectionTitle:`Saúde do sistema`,sectionDescription:`Analisa os logs recentes em busca de problemas conhecidos que você normalmente pode resolver sozinho, antes que virem um chamado de suporte.`,rescan:`Analisar novamente`,clean:`Nenhum problema conhecido encontrado nas últimas {{times}} entradas de log.`,logUnavailable:`O registro em arquivo está desativado, então os logs não podem ser analisados. Ative o registro em arquivo para usar esta verificação.`,learnMore:`Como corrigir`,fixLabel:`Correção:`,occurrences:`Visto {{times}}× — última vez às {{lastSeen}}`,category:{layer8:`Você pode corrigir isto`,environment:`Ambiente`,bug:`Por favor, relate isto`},signature:{"ftp-auth-rejected":{name:`A impressora rejeitou o código de acesso`,cause:`A impressora recusou o login de transferência de arquivos. O código de acesso está errado ou mudou após alternar o Modo Desenvolvedor.`,fix:`Copie novamente o código de acesso da tela da impressora (configurações de LAN) e atualize-o nas configurações da impressora no Bambuddy.`},"ftp-connection-timeout":{name:`Tempo limite da conexão de transferência de arquivos`,cause:`O Bambuddy não conseguiu acessar a porta de transferência de arquivos da impressora (FTPS 990). A porta está bloqueada, ou a impressora está desligada ou em outra sub-rede.`,fix:`Verifique se nada bloqueia a porta 990 entre o Bambuddy e a impressora e se ambos estão na mesma rede.`},"ftp-ssl-error":{name:`Falha no handshake seguro de transferência de arquivos`,cause:`O serviço de arquivos da impressora respondeu na porta 990 sem TLS. O servidor de arquivos dela travou: é uma falha da impressora, não do firewall nem do firmware.`,fix:`Reinicie a impressora. Até lá, arquivos de impressão, capas e timelapses não podem ser baixados; a impressão em si não é afetada.`},"bambu-cloud-captcha":{name:`O Bambu Cloud está pedindo um CAPTCHA`,cause:`A proteção antiabuso do Bambu está verificando esta rede, então nenhum login no Bambu Cloud consegue ser concluído. Isso depende do endereço IP público, não da sua conta nem desta instalação.`,fix:`Aguarde: costuma passar em algumas horas e novas tentativas prolongam o bloqueio. Enquanto isso, conecte-se com um token de acesso obtido em uma sessão do navegador.`},"mqtt-connection-flapping":{name:`A conexão com a impressora cai repetidamente`,cause:`A conexão de controle (MQTT 8883) desconecta e reconecta repetidamente — geralmente por uma rede fraca ou uma porta parcialmente bloqueada.`,fix:`Verifique o sinal de Wi-Fi perto da impressora, prefira uma conexão com fio e certifique-se de que a porta 8883 esteja acessível de forma confiável.`},"camera-connection-refused":{name:`Transmissão da câmera inacessível`,cause:`Não foi possível acessar a câmera ao vivo na porta RTSPS 322. A porta está bloqueada, ou a câmera ou a visualização ao vivo via LAN está desativada na impressora.`,fix:`Ative a câmera e a visualização ao vivo via LAN na impressora e verifique se a porta 322 não está bloqueada. Isso não afeta a impressão.`},"database-locked":{name:`Conflitos de gravação no banco de dados`,cause:`O banco de dados SQLite apresenta erros "database is locked" sob carga — comum ao usar várias impressoras ao mesmo tempo.`,fix:`Migre o Bambuddy para um banco de dados PostgreSQL externo. Consulte o guia do PostgreSQL na documentação.`}}},vpDiagnostic:{title:`Verificação de configuração — {{name}}`,runButton:`Executar verificação de configuração`,running:`Executando verificação de configuração...`,runFailed:`Não foi possível executar a verificação de configuração: {{error}}`,retry:`Verificar novamente`,overall:{ok:`Todas as verificações passaram — esta impressora virtual está configurada corretamente.`,warnings:`A impressora virtual deve funcionar, mas alguns pontos precisam de atenção.`,problems:`Foram encontrados problemas que explicam por que o slicer não consegue ver ou usar esta impressora virtual.`},check:{enabled:{title:`Impressora virtual habilitada`,fail:`Esta impressora virtual está desligada. Ative-a para torná-la detectável.`},running:{title:`Serviços em execução`,fail:`A impressora virtual está habilitada, mas seus serviços não estão em execução. Verifique o log do Bambuddy — geralmente um conflito de IP de vínculo ou um erro de permissão os interrompe.`},bind_interface:{title:`Interface de rede de vínculo`,fail:`A interface de vínculo não está definida ou não existe mais neste host. Escolha uma interface atual no menu "Interface de vínculo".`},access_code:{title:`Código de acesso definido`,fail:`Nenhum código de acesso definido. O slicer precisa receber o mesmo código de acesso de 8 caracteres que você define aqui.`},target_printer:{title:`Impressora de destino`,fail:`Nenhuma impressora de destino selecionada. O modo proxy precisa de uma impressora real para a qual encaminhar.`,warn:`A impressora de destino está offline no momento — o encaminhamento será retomado quando ela se reconectar.`},port_ftps:{title:`Serviço de upload de arquivos (porta {{port}})`,fail:`Nada está escutando na porta {{port}} do IP de vínculo, então o slicer não consegue enviar arquivos. A causa habitual é um conflito de porta nesta interface.`},port_mqtt:{title:`Serviço de controle (porta {{port}})`,fail:`Nada está escutando na porta {{port}} do IP de vínculo, então o slicer não consegue conectar nem mostrar o status.`},port_bind:{title:`Serviço de descoberta (porta {{port}})`,fail:`Nada está escutando na porta {{port}} do IP de vínculo, então a negociação de descoberta do slicer falha.`},privileged_ports:{title:`Vinculação a portas privilegiadas`,fail:`A porta {{port}} está abaixo de 1024 e este serviço não tem permissão para vinculá-la, por isso nada está escutando acima. Adicione AmbientCapabilities=CAP_NET_BIND_SERVICE em /etc/systemd/system/bambuddy.service e reinicie, ou execute "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))". No Docker, adicione cap_add: [NET_BIND_SERVICE].`},certificate:{title:`Certificado TLS`,pass:`Certificado pronto. Verifique se o certificado CA do Bambuddy (acima) está importado no armazenamento de confiança do seu slicer.`,fail:`O certificado TLS desta impressora virtual está ausente. Verifique se o diretório de dados do Bambuddy tem permissão de escrita.`}}},bugReport:{logHealthSummary:`Problemas conhecidos encontrados nos seus logs`,logHealthIntro:`Os logs recentes correspondem a problemas conhecidos. Veja as correções abaixo — resolvê-las pode solucionar seu problema sem um relatório de bug. Você ainda pode enviar um relatório abaixo.`,title:`Reportar um bug`,description:`Descrição`,descriptionPlaceholder:`O que deu errado? Por favor, descreva o problema...`,email:`Email (opcional)`,emailPlaceholder:`seu@email.com.br`,emailPrivacy:`Se fornecido, seu email será incluído em uma seção recolhida da issue no GitHub para que o mantenedor possa entrar em contato.`,screenshot:`Captura de tela`,uploadOrPaste:`Enviar, colar ou arrastar uma imagem`,dataCollectedSummary:`Quais dados são incluídos no relatório?`,dataIncluded:`Incluídos:`,dataIncludedList:`Versão do app, SO, arquitetura, versão Python, estatísticas do banco de dados (apenas contagens), modelos de impressora, quantidade de bicos, versões de firmware, status de conexão, status de integrações (Spoolman, MQTT, HA), configurações não sensíveis, contagem de interfaces de rede, detalhes Docker, versões de dependências.`,dataNeverIncluded:`Nunca incluídos:`,dataNeverIncludedList:`Nomes de impressoras, números de série, códigos de acesso, senhas, endereços IP, endereços de email, chaves de API, tokens, URLs de webhook, nomes de host ou nomes de usuário.`,submit:`Enviar`,startLogging:`Iniciar log de depuração`,stepEnableLogging:`Log de depuração ativado`,stepReproduce:`Reproduza o problema agora`,stepStopLogging:`Parar & enviar relatório`,stopAndSubmit:`Parar & Enviar`,maxDuration:`Para automaticamente após {{minutes}} min`,stoppingLogs:`Coletando logs & enviando...`,submitting:`Enviando relatório de bug...`,submittingStepConnection:`Executando verificações de conectividade das impressoras`,submittingStepVirtualPrinters:`Executando verificações de configuração das impressoras virtuais`,submittingStepLogScan:`Analisando registros recentes em busca de problemas conhecidos`,submittingStepSubmit:`Enviando relatório para o GitHub`,submitSuccess:`Relatório de bug enviado com sucesso!`,submitFailed:`Falha ao enviar relatório de bug`,diagnosticChecking:`Verificando as conexões das impressoras...`,diagnosticHealthy:`Verificação de conexão aprovada — nenhum problema encontrado nas suas impressoras.`,diagnosticSummary:`{{problems}} de {{total}} impressoras têm problemas de conexão`,diagnosticIntro:`Uma ou mais impressoras têm um problema de conexão que pode estar causando seu problema. Expanda uma impressora abaixo para ver a solução — resolvê-la pode solucionar o problema sem um relatório de bug. Você ainda pode enviar um relatório abaixo.`,thankYou:`Obrigado!`,submitted:`Seu relatório de bug foi enviado.`,viewIssue:`Ver issue`,closeKeepsRecording:`Você pode fechar este painel enquanto reproduz o problema: a gravação continua e, ao reabrir, você volta para cá.`,resumeRecording:`Relatório de bug gravando — {{elapsed}}. Clique para concluir.`,resumeReport:`Retomar relatório`,unexpectedError:`Ocorreu um erro inesperado`},failureDetection:{title:`Detecção de Falhas por IA`,description:`Monitora impressões via API ML do Obico auto-hospedada e age automaticamente em falhas detectadas.`,mlUrl:`URL da API ML do Obico`,mlUrlHint:`URL base do seu contêiner Obico ml_api auto-hospedado (ex.: http://192.168.1.10:3333).`,mlToken:`Token da API ML (opcional)`,mlTokenPlaceholder:`Deixe vazio se o servidor for executado sem ML_API_TOKEN`,mlTokenHint:`Deve corresponder à variável de ambiente ML_API_TOKEN do seu contêiner Obico ml_api. Deixe vazio se o contêiner for executado sem token.`,test:`Testar`,testSuccess:`API ML acessível e operacional.`,testSuccessTokenUnknown:`API ML acessível e operacional. Não foi possível verificar o token.`,testFailed:`Não foi possível acessar a API ML.`,sensitivity:`Sensibilidade`,sensitivityLow:`Baixa (menos falsos positivos)`,sensitivityMedium:`Média (equilibrada)`,sensitivityHigh:`Alta (detecção precoce, mais falsos positivos)`,sensitivityHint:`Ajusta os limiares de confiança que disparam avisos e falhas.`,action:`Ação em falha detectada`,actionNotify:`Apenas notificar`,actionPause:`Pausar impressão`,actionPauseOff:`Pausar e cortar energia`,pollInterval:`Intervalo de verificação (segundos)`,pollIntervalHint:`Frequência de verificação de cada impressora durante a impressão. Mínimo 5s, máximo 120s.`,externalUrlMissing:`URL externa não definida.`,externalUrlHint:`A API ML busca a captura da câmera por URL. Defina a URL externa nas configurações gerais para que o contêiner da API ML possa alcançar o Bambuddy.`,perPrinterTitle:`Impressoras monitoradas`,perPrinterHint:`Escolha quais impressoras o serviço de detecção monitora.`,monitorAll:`Monitorar todas as impressoras conectadas`,statusTitle:`Status`,serviceRunning:`Serviço em execução`,thresholds:`Limiares baixo / alto`,activePrinters:`Impressões ativas`,noActivePrints:`Nenhuma impressão em andamento.`,historyTitle:`Detecções recentes`,noHistory:`Nenhuma detecção ainda.`},makerworld:{title:`MakerWorld`,description:`Cole uma URL de modelo do MakerWorld para importar e imprimir diretamente do Bambuddy — sem precisar abrir o app Bambu Handy.`,pasteUrlHeader:`Importar do MakerWorld`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… ou cole qualquer link do MakerWorld`,resolveButton:`Resolver`,signInRequiredTitle:`Login no Bambu Cloud necessário para baixar`,signInRequiredBody:`Você pode navegar pelos detalhes do modelo anonimamente, mas o MakerWorld exige uma conta Bambu Cloud para baixar arquivos 3MF.`,signInExpiredTitle:`Sessão do Bambu Cloud expirada`,signInExpiredBody:`Você continua conectado ao Bambuddy, mas a Bambu Lab deixou de aceitar o token armazenado, então os downloads vão falhar. Entre novamente no Bambu Cloud.`,openCloudSettings:`Abrir configurações do Cloud`,untitledModel:`Modelo sem título`,byCreator:`por {{name}}`,downloadsCount:`{{count}} downloads`,licensePrefix:`Licença`,alreadyImported:`Já na biblioteca`,openOnMakerworld:`Abrir no MakerWorld`,alreadyInLibrary:`Este modelo já está na sua biblioteca — encontre-o em Gerenciador de Arquivos → MakerWorld`,importSuccess:`{{filename}} importado — salvo em Gerenciador de Arquivos → MakerWorld`,platesHeader:`Placas ({{count}})`,plateDefaultName:`Placa {{n}}`,materialCount:`{{count}} filamentos`,amsRequired:`AMS necessário`,slicedFor:`Fatiado para {{printer}}`,alsoCompatible:`Também marcado como compatível: {{printers}}`,importToLibrary:`Salvar`,sliceIn:`Salvar e fatiar no {{slicer}}`,disclaimer:`A integração com o MakerWorld usa endpoints de API documentados pela comunidade. Bambuddy não é afiliado nem endossado pelo MakerWorld ou pela Bambu Lab.`,lastImportSuccess:`Importado para sua biblioteca`,lastImportAlreadyInLibrary:`Já na sua biblioteca`,viewInLibrary:`Ver no Gerenciador de Arquivos`,openInBambuStudio:`Abrir no Bambu Studio`,openInOrcaSlicer:`Abrir no OrcaSlicer`,importTo:`Importar para o Gerenciador de Arquivos`,recentImportsHeader:`Importações recentes`,phaseResolving:`Resolvendo`,phaseDownloading:`Baixando`,folderAuto:`MakerWorld (padrão)`,importAll:`Importar tudo`,importAllProgress:`Importando {{current}}/{{total}}`,openGallery:`Abrir galeria de imagens`,galleryPrev:`Imagem anterior`,galleryNext:`Próxima imagem`,deleteImport:`Remover da biblioteca`,importDeleting:`Removendo…`,importDeleted:`Removido da biblioteca`,confirmDelete:`Remover {{filename}} da biblioteca? O arquivo local será excluído, mas a placa pode ser reimportada do MakerWorld.`,errors:{resolveFailed:`Não foi possível resolver essa URL do MakerWorld.`,downloadFailed:`Falha no download. Tente novamente.`,deleteFailed:`Não foi possível remover o arquivo da biblioteca.`}},gcodeViewer:{filamentSlot:`Filamento {{n}}`,loading:`Lendo a trajetória…`,loadFailed:`Não foi possível carregar o G-code deste arquivo.`,showTravel:`Movimentos sem extrusão`,topLayer:`Camada superior`,bottomLayer:`Camada inferior`,noSource:`Nenhum arquivo foi indicado para visualização.`,view:{filament:`Filamento`,feature:`Elemento`,height:`Altura`,width:`Largura`},feature:{wall:`Paredes`,sparseInfill:`Preenchimento esparso`,solidInfill:`Preenchimento sólido`,bridge:`Ponte / saliência`,support:`Suporte`,skirt:`Saia / aba`,gapFill:`Preenchimento de lacunas`,ironing:`Alisamento`,primeTower:`Torre de purga`},back:`Voltar`,backToArchives:`Voltar para os arquivos de impressão`,backToFiles:`Voltar para o gerenciador de arquivos`,plates:`Placas`,plateN:`Placa {{n}}`},libraryTrash:{title:`Lixeira`,headerButton:`Lixeira`,headerTooltip:`Ver arquivos movidos para a lixeira`,backToFiles:`Voltar ao gerenciador de arquivos`,subtitleAdmin:`Arquivos excluídos ficam aqui por {{days}} dias e depois são removidos automaticamente. Esta visualização mostra a lixeira de todos os usuários.`,subtitleUser:`Arquivos excluídos ficam aqui por {{days}} dias e depois são removidos automaticamente.`,loading:`Carregando a lixeira…`,loadError:`Não foi possível carregar a lixeira.`,empty:`A lixeira está vazia.`,summary:`{{count}} arquivos · {{size}}`,emptyTrash:`Esvaziar lixeira`,restore:`Restaurar`,purgeNow:`Excluir agora`,autoPurgeIn:`Exclusão automática em {{when}}`,days:`dias`,retentionLabel:`Excluir automaticamente após`,selectAll:`Selecionar todos`,selectOne:`Selecionar {{filename}}`,selectionCount:`{{count}} selecionado(s)`,bulkRestore:`Restaurar selecionados`,bulkPurge:`Excluir selecionados`,col:{filename:`Arquivo`,folder:`Pasta`,size:`Tamanho`,deleted:`Movido para a lixeira`,autoPurge:`Exclusão auto.`,owner:`Proprietário`,actions:`Ações`},confirm:{purgeTitle:`Excluir permanentemente?`,purgeBody:`{{filename}} será excluído do disco e não poderá ser restaurado.`,emptyTitle:`Esvaziar a lixeira?`,emptyBody:`Todos os {{count}} arquivos serão excluídos do disco. Esta ação não pode ser desfeita.`,bulkPurgeTitle:`Excluir permanentemente os arquivos selecionados?`,bulkPurgeBody:`Os {{count}} arquivos selecionados serão excluídos do disco e não poderão ser restaurados.`,cta:`Excluir permanentemente`},toast:{restored:`Arquivo restaurado.`,restoreFailed:`Não foi possível restaurar o arquivo.`,purged:`Arquivo excluído permanentemente.`,purgeFailed:`Não foi possível excluir o arquivo.`,emptied:`{{count}} arquivo(s) excluído(s) da lixeira.`,emptyFailed:`Não foi possível esvaziar a lixeira.`,retentionSaved:`Exclusão automática definida para {{days}} dias.`,retentionFailed:`Não foi possível salvar a configuração de retenção.`,bulkRestored:`{{count}} arquivo(s) restaurado(s).`,bulkPurged:`{{count}} arquivo(s) excluído(s).`}},libraryPurge:{title:`Limpar arquivos antigos`,headerButton:`Limpar antigos`,headerTooltip:`Mover arquivos antigos em massa para a lixeira`,description:`Arquivos mais antigos que o limite serão movidos para a lixeira. Pastas externas são ignoradas. Você pode restaurar da lixeira antes da exclusão automática.`,ageLabel:`Mover arquivos mais antigos que`,days:`dias`,includeNeverPrinted:`Incluir arquivos que nunca foram impressos`,effectsTitle:`O que acontece quando você clica em Limpar`,effect1:`Os arquivos correspondentes são movidos para a Lixeira — ainda não são excluídos do disco.`,effect2:`Você pode restaurá-los da Lixeira a qualquer momento até o fim do período de retenção.`,effect3:`Após o período de retenção, o coletor da lixeira os remove permanentemente.`,effect4:`Arquivos em pastas externas (vinculadas) são ignorados — Bambuddy nunca exclui bytes que não possui.`,previewLoading:`Verificando quantos arquivos correspondem…`,previewFailed:`Não foi possível pré-visualizar a limpeza.`,previewSummary:`{{count}} arquivos · {{size}} seriam movidos para a lixeira`,andMore:`…e mais {{count}}`,warning:`Os arquivos são excluídos de forma suave — você pode restaurá-los da lixeira até o fim do período de retenção.`,confirmCta:`Mover {{count}} para a lixeira`,purging:`Movendo para a lixeira…`,toast:{success:`{{count}} arquivo(s) movido(s) para a lixeira.`,failed:`Não foi possível limpar os arquivos.`}},libraryAutoPurge:{enableLabel:`Limpar arquivos antigos automaticamente`,enableDescription:`Executa a limpeza administrativa uma vez por dia. Os arquivos vão primeiro para a lixeira — não são excluídos imediatamente.`,ageLabel:`Limpar automaticamente arquivos mais antigos que`,ageDescription:`Mínimo 7 dias, máximo 10 anos. Usa a mesma regra de idade do botão Limpar manual.`,days:`dias`,includeNeverPrinted:`Incluir arquivos que nunca foram impressos`,saveFailed:`Não foi possível salvar as configurações de limpeza automática.`},archivePurge:{headerButton:`Limpar antigos`,headerTooltip:`Excluir arquivos antigos em massa`,title:`Limpar arquivos antigos`,description:`Limpa o histórico de impressão antigo. Cada arquivo envelhece pela última conclusão de impressão — reimprimir reinicia a idade, então trabalho ativo nunca é removido.`,ageLabel:`Excluir arquivos não impressos nos últimos`,days:`dias`,effectsTitle:`O que acontece quando você clica em Limpar`,effect1:`Cada arquivo correspondente é ocultado das listagens e seus arquivos são removidos do disco (3MF, miniatura, timelapse, 3MF de origem, F3D, fotos).`,effect2:`A linha do arquivo permanece no banco de dados para que o Quick Stats mantenha a contribuição de filamento, tempo, custo e energia — mesmo comportamento padrão da exclusão individual.`,effect3:`Marque "Remover também das estatísticas" abaixo para descartar também a contribuição do Quick Stats (equivalente à opção da exclusão individual). Esse caminho é irreversível.`,effect4:`Reimprimir um arquivo reinicia seu cronômetro de idade, então arquivos ativos estão protegidos.`,purgeStatsLabel:`Remover também das estatísticas`,purgeStatsHint:`Remove os arquivos correspondentes do Quick Stats (filamento, tempo, custo, energia). Sem essa opção, o Quick Stats mantém cada contribuição e apenas os arquivos saem do disco.`,previewLoading:`Verificando quantos arquivos correspondem…`,previewFailed:`Não foi possível visualizar a limpeza.`,previewSummary:`{{count}} arquivos · {{size}} seriam removidos`,andMore:`…e mais {{count}}`,warning:`Os arquivos são removidos do disco e não podem ser restaurados. Baixe ou favorite o que quiser manter antes de continuar.`,confirmCta:`Remover {{count}} arquivo(s)`,purging:`Removendo…`,toast:{success:`{{count}} arquivo(s) removido(s).`,failed:`Não foi possível limpar os arquivos.`}},archiveAutoPurge:{enableLabel:`Limpar arquivos antigos auto.`,enableDescription:`Uma vez por dia oculta das listagens os arquivos não impressos dentro do limite e remove seus arquivos do disco. Reimprimir reinicia o cronômetro.`,ageLabel:`Exclusão auto. de arquivos não impressos nos últimos`,ageDescription:`Mínimo 7 dias, máximo 10 anos. Baseado na última conclusão de impressão — reimprimir reinicia a idade. Remove 3MF, miniatura, timelapse, 3MF de origem, F3D e fotos.`,days:`dias`,purgeStatsLabel:`Remover também das estatísticas`,purgeStatsDescription:`Quando ativada, a varredura diária também descarta a contribuição de cada arquivo limpo do Quick Stats (filamento, tempo, custo, energia). Desativada por padrão — o Quick Stats mantém a contribuição e apenas os arquivos saem do disco.`,runNow:`Limpar arquivos agora`,saveFailed:`Não foi possível salvar as configurações de limpeza automática.`},cameraTokens:{scope:{camera_stream:`Transmissão da câmera`,camwall:`Mural de câmeras`,overlay:`Sobreposição de streaming`},title:`Tokens da API de câmera`,navTitle:`Tokens da API de câmera`,description:`Tokens de longa duração para incorporar a transmissão da câmera no Home Assistant, no Frigate, em telas em modo quiosque ou em qualquer outra ferramenta que precise de um endereço estável. O escopo é escolhido na criação; um token pode ser revogado a qualquer momento.`,loading:`Carregando…`,confirmRevoke:{title:`Revogar este token?`,body:`Qualquer dispositivo usando "{{name}}" perderá acesso imediatamente. Isso não pode ser desfeito.`,cancel:`Cancelar`,confirm:`Revogar`},create:{scopeLabel:`Escopo`,hintCameraStream:`Um token de transmissão da câmera só consegue buscar transmissões e instantâneos. Use-o no Home Assistant, no Frigate ou em qualquer coisa que incorpore uma única câmera.`,hintCamWall:`Um token do mural de câmeras abre /camwall em uma tela sem login. Ele vê o nome e o estado de cada impressora e as transmissões das câmeras. Não vê nomes de arquivo, endereços nem códigos de acesso.`,hintOverlay:`Um token de sobreposição de streaming abre /overlay/{printerId} em uma tela sem login — para o OBS ou qualquer transmissão ao vivo. Ele vê a transmissão da câmera de uma impressora e seu status de impressão ao vivo, incluindo o nome de arquivo mostrado na tela. Não vê endereços nem códigos de acesso.`,title:`Criar novo token`,nameLabel:`Nome do token`,namePlaceholder:`ex. Home Assistant`,daysLabel:`Dias até expirar`,submit:`Criar`,hint:`Tempo de vida máximo 365 dias. O valor do token é exibido apenas na criação — copie agora.`},created:{camWallUrlTitle:`Endereço do mural de câmeras para esta tela`,camWallUrlHint:`Abra este endereço na tela. Qualquer pessoa que consiga lê-lo pode assistir ao painel, então trate-o como uma chave: revogue o token para cortar o acesso da tela.`,overlayUrlTitle:`Endereço de sobreposição para OBS`,overlayUrlHint:`Adicione isto como Fonte de navegador no OBS. Altere o número em /overlay/1 para o número da sua impressora (do endereço dela na página Impressoras). Qualquer pessoa que consiga ler o endereço pode assistir à transmissão, então trate-o como uma chave: revogue o token para cortar o acesso.`,title:`Token criado – copie agora`,warning:`Esta é a única vez que este token será visível. Após fechar este diálogo, você nunca poderá vê-lo novamente.`,copy:`Copiar`,dismiss:`Eu salvei`},list:{scope:`Escopo`,myTitle:`Meus tokens`,allTitle:`Todos os usuários (visão admin)`,empty:`Nenhum token ainda.`,name:`Nome`,owner:`Proprietário`,prefix:`Prefixo`,created:`Criado`,expires:`Expira`,lastUsed:`Último uso`,revoke:`Revogar`,expired:`Expirado`},toast:{created:`Token criado`,createFailed:`Falha ao criar token`,revoked:`Token revogado`,revokeFailed:`Falha ao revogar token`,loadFailed:`Falha ao carregar tokens`,copied:`Copiado para a área de transferência`,copyFailed:`Falha ao copiar – selecione e copie manualmente`}},forecast:{title:`Previsão de Estoque`,noSpools:`Nenhum carretel ativo encontrado. Adicione carretéis ao seu inventário para ver os dados de previsão.`,noUsageData:`Nenhum dado de uso disponível — não é possível projetar a linha do tempo do estoque.`,sku:`SKU`,material:`Material`,stock:`Estoque`,dailyRate:`Taxa`,daysLeft:`Dias Restantes`,emptyBy:`Esgota em`,reorderBy:`Reabastecer até`,actions:`Ações`,trend:`Tendência`,estimated:`Est.`,noData:`Sem dados`,timeframe:`Período`,chartTitle:`Estoque projetado — Top 5 materiais`,dashedLinesROP:`Linhas tracejadas = pontos de reposição`,stockLevel:`Nível de Estoque`,reorderPoint:`Ponto de Reposição`,safetyMargin:`Margem de Segurança`,trendLegend:`Tendência (baseada em histórico, nível de serviço 95%)`,estimatedLegend:`Estimado (delta de peso)`,noDataLegend:`Sem dados`,ropLabel:`PR`,ssLabel:`SE`,safetyStockLegend:`Estoque de segurança`,stockArrivalLegend:`Chegada do estoque`,stockoutLegend:`Ruptura de estoque`,alertCount_one:`{{count}} alerta`,alertCount_other:`{{count}} alertas`,order:`Pedir`,globalLeadTime:`Lead time global`,globalLeadTimeHint:`Lead time global mínimo — usado no cálculo do ponto de reposição para todos os SKUs`,save:`Salvar`,cancel:`Cancelar`,settingsSaved:`Configurações salvas`,failedSaveSettings:`Falha ao salvar configurações`,globalLeadTimeSaved:`Prazo global salvo`,skuLeadTimeOverride:`Override de Lead Time do SKU`,skuLeadTimeHint:`0 = usar lead time global. Defina >0 para substituir para este SKU.`,safetyMarginLabel:`Margem de Segurança`,effectiveLeadTime:`Lead Time Efetivo`,effectiveLeadTimeHint:`máx(global {{global}}d, SKU {{sku}}d)`,reorderPointHint:`d̄ × LT + safety margin — peça quando o estoque atingir este nível`,safetyMarginHint:`Estoque de segurança estatístico (z=1,65 × σ × √LT) + buffer definido pelo usuário`,safetyMarginHintDays:`Buffer adicionado ao estoque de segurança estatístico.{{approx}}`,safetyMarginHintDaysApprox:` ≈ {{g}}g na taxa atual.`,safetyMarginHintG:`Buffer de peso fixo adicionado ao estoque de segurança estatístico.{{approx}}`,safetyMarginHintGApprox:` ≈ {{days}}d na taxa atual.`,individualSpools:`Carretéis individuais`,labelWeight:`Etiqueta`,spoolCount_one:`{{count}} carretel`,spoolCount_other:`{{count}} carretéis`,stockBreakRisk:`Risco de ruptura de estoque`,stockBreakBefore:`Ruptura de estoque antes do reabastecimento`,stockBreakDetail:`{{days}}d restantes, lead time {{lt}}d.`,reorderNow:`Reabastecer agora`,reorderTriggerPassed:`A data de acionamento {{date}} já passou.`,shoppingList:`Lista de Compras`,shoppingListItems_one:`({{count}} item)`,shoppingListItems_other:`({{count}} itens)`,shoppingListEmpty:`A lista de compras está vazia. Clique no ícone do carrinho em qualquer linha para adicionar itens.`,addToCart:`Adicionar à lista de compras`,alertsSnoozed:`Silenciar alertas para este SKU`,alertsEnabled:`Ativar alertas para este SKU`,addedToCart:`Adicionado à lista de compras`,failedAddItem:`Falha ao adicionar item`,listView:`Lista`,logisticsView:`Logística`,qty:`Qtd`,weight:`Peso`,leadTime:`Prazo de entrega`,expectedRestock:`Reabastecimento Previsto`,status:`Status`,note:`Nota`,pending:`Pendente`,purchased:`Comprado`,received:`Recebido`,markPurchased:`Marcar como comprado`,markReceived:`Marcar como recebido — adiciona carretéis ao estoque`,resetToPending:`Redefinir para pendente`,remove:`Remover`,clearAll:`Limpar tudo`,downloadCsv:`CSV`,addToCartTitle:`Adicionar à lista de compras`,byQuantity:`Por quantidade`,byDuration:`Por duração`,numberOfSpools:`Número de carretéis`,lastHowManyDays:`Por quantos dias deve durar?`,noUsageQty:`Sem dados de uso — quantidade definida como 1.`,noteOptional:`Observação (opcional)`,notePlaceholder:`ex. para o projeto X, urgente…`,addNSpools_one:`Adicionar {{count}} carretel`,addNSpools_other:`Adicionar {{count}} carretéis`,onArrival:`Na Chegada`,stockBreakIn:`Ruptura de estoque em {{days}}d.`,stockRunsOutBefore:`O estoque se esgota antes do lead time de {{lt}}d decorrer.`,atRate:`A {{rate}}g/dia você precisa de`,moreSpools_one:`{{count}} carretel a mais`,moreSpools_other:`{{count}} carretéis a mais`,bridgeGap:`para cobrir a lacuna.`,noReadAccess:`Você não tem permissão para visualizar previsões de inventário.`,noWriteAccess:`Você não tem permissão para modificar as configurações de previsão.`}}},"zh-CN":{translation:{nav:{printers:`打印机`,archives:`归档`,queue:`打印队列`,stats:`统计`,profiles:`配置文件`,maintenance:`维护`,projects:`项目`,finance:`财务`,inventory:`耗材`,files:`文件管理器`,makerworld:`MakerWorld`,notifications:`通知`,settings:`设置`,system:`系统`,collapseSidebar:`收起侧边栏`,expandSidebar:`展开侧边栏`,update:`更新`,updateAvailable:`有可用更新：v{{version}}`,updateAvailableBanner:`版本 {{version}} 已发布！`,viewUpdate:`查看更新`,viewOnGithub:`在 GitHub 上查看`,keyboardShortcuts:`键盘快捷键 (?)`,switchToLight:`切换到浅色模式`,switchToDark:`切换到深色模式`,switchToSystem:`切换到系统模式`,smartSwitches:`智能开关`,logout:`退出登录`,installApp:`安装应用`,installAppSuccess:`Bambuddy 已安装`},common:{plusNMore:`另 {{count}} 个`,save:`保存`,saving:`保存中...`,cancel:`取消`,delete:`删除`,edit:`编辑`,add:`添加`,close:`关闭`,confirm:`确认`,loading:`加载中...`,error:`错误`,errorLoading:`加载错误`,retry:`重试`,success:`成功`,warning:`警告`,enabled:`已启用`,disabled:`已禁用`,yes:`是`,no:`否`,on:`开`,off:`关`,all:`全部`,none:`无`,search:`搜索`,filter:`筛选`,sort:`排序`,refresh:`刷新`,download:`下载`,upload:`上传`,uploading:`上传中...`,uploadFailed:`上传失败`,actions:`操作`,status:`状态`,name:`名称`,user:`用户`,description:`描述`,date:`日期`,time:`时间`,hours:`小时`,minutes:`分钟`,seconds:`秒`,days:`天`,enable:`启用`,disable:`禁用`,permissions:`权限`,noPrinters:`未配置打印机`,noData:`暂无数据`,linkNotFound:`未找到链接`,required:`必填`,optional:`可选`,dismiss:`关闭`,apply:`应用`,reset:`重置`,export:`导出`,import:`导入`,clear:`清除`,selectAll:`全选`,deselectAll:`取消全选`,noChange:`— 不更改 —`,unchanged:`未更改`,unassigned:`未分配`,unknown:`未知`,unknownError:`未知错误`,today:`今天`,tomorrow:`明天`,asap:`尽快`,overdue:`已逾期`,now:`现在`,collapse:`收起`,expand:`展开`,previous:`上一页`,next:`下一页`,viewArchive:`查看归档`,viewInFileManager:`在文件管理器中查看`,addedBy:`由 {{username}} 添加`,prints:`次打印`,more:`还有 {{count}} 个`,ascending:`升序`,descending:`降序`,back:`返回`,copy:`复制`,copied:`已复制!`,printer:`打印机`,remove:`移除`,type:`类型`,print:`打印`,rename:`重命名`,move:`移动`,create:`创建`,duplicate:`复制`,left:`左`,right:`右`,run:`运行`,running:`运行中...`},finance:{allTypes:`所有类型`,allCostCenters:`所有成本中心`,title:`财务`,subtitle:`钱包、个人交易和成本中心`,noAccess:`您没有权限查看财务数据。`,personalView:`个人视图`,adminView:`管理员视图`,createCostCenter:`创建成本中心`,adjustWallet:`调整钱包`,addManualPrint:`添加手动打印`,manageMembers:`管理成本中心成员`,currentBalance:`个人余额`,transactions:`交易`,personalTransactions:`个人交易`,costCenters:`成本中心`,availableForPrinting:`可用于打印分配`,costCenterName:`名称`,budgetType:`预算类型`,monthlyBudget:`月度预算`,totalBudget:`总预算`,noBudget:`无预算`,create:`创建`,selectUser:`选择用户`,transactionType:`类型`,amount:`金额`,noCostCenter:`无成本中心`,descriptionOptional:`描述（可选）`,applyAdjustment:`应用调整`,memberCanPrint:`成员可以打印`,addMember:`添加成员`,canPrint:`可以打印`,noMembers:`未分配任何成员。`,editCostCenter:`编辑成本中心`,myCostCenters:`我的成本中心`,costCentersHint:`审查预算限制并将成本控制在可控范围内`,noCostCenters:`未找到成本中心。`,owner:`所有者`,balance:`账户余额`,unlimited:`无限制`,budgetPolicyHint:`账户余额用于记录成本。打印仅受所选成本中心预算限制；未设置预算时不受限制。`,budget:`预算`,shared:`共享`,cannotEditPrivateCostCenter:`私人成本中心无法在此处编辑`,recentTransactions:`最近的交易`,transactionsHint:`按类型和成本中心筛选，然后浏览页面`,first:`首页`,prev:`上一页`,next:`下一页`,last:`末页`,pageNumberOf:`第 {{page}} 页，共 {{total}} 页`,noTransactions:`没有可用的交易。`,noTransactionsForFilter:`没有交易与选定的筛选器相匹配。`,costCenter:`成本中心`,balanceAfter:`调整后余额`,userWithId:`用户 #{{id}}`,partial:`部分`,editTransaction:`编辑交易`,selectCostCenter:`选择成本中心...`,costCenterRequired:`请选择一个成本中心`,amountExample:`例如 4.00`,manualAdjustmentExample:`例如 手动调整`,userRequired:`请选择一个用户`,amountInvalid:`金额必须是有效的数字`,createdCostCenter:`成本中心已创建`,createCostCenterFailed:`创建成本中心失败`,transactionDeleted:`交易已删除`,deleteTransactionFailed:`删除交易失败`,transactionEdited:`交易已更新，账本已重新计算`,editTransactionFailed:`编辑交易失败`,manualPrintCreated:`手动打印费用已添加，账本已重新计算`,manualPrintFailed:`创建手动打印失败`,memberSaved:`成员已保存`,memberSaveFailed:`保存成员失败`,memberRemoved:`成员已移除`,memberRemoveFailed:`移除成员失败`,costCenterNameRequired:`成本中心名称为必填项`,costCenterUpdated:`成本中心已更新`,costCenterUpdateFailed:`更新成本中心失败`,confirmDeleteCostCenter:`删除成本中心 "{{name}}" ?`,costCenterDeleted:`成本中心已删除`,costCenterDeleteFailed:`删除成本中心失败`,deleteTransactionConfirm:`删除此交易？余额将自动重新计算。`,deposit:`存款`,withdraw:`取款`,printCharge:`打印费用`,deleteTransaction:`删除交易`},printers:{addPreflight:{checking:`正在检查连接...`,warning:`部分连接检查未通过。此打印机可能显示为离线。请查看下方的检查项，尽量修复，或仍然保存。`,back:`返回`,saveAnyway:`仍然保存`},title:`打印机`,addPrinter:`添加打印机`,editPrinter:`编辑打印机`,deletePrinter:`删除打印机`,printerName:`打印机名称`,serialNumber:`序列号`,ipAddress:`IP 地址 / 主机名`,accessCode:`访问码`,model:`型号`,nozzleCount:`喷嘴数量`,autoArchive:`自动归档`,status:{available:`可用`,idle:`空闲`,printing:`打印中`,paused:`已暂停`,offline:`离线`,problem:`故障`,error:`错误`,finished:`已完成`,unknown:`未知`},temperatures:{nozzle:`喷嘴`,bed:`热床`,chamber:`腔室`},heaterHistory:{title:`加热历史`,openLabel:`查看加热历史`,nozzle:`喷嘴`,nozzle2:`喷嘴 2`,bed:`热床`,chamber:`腔室`,error:`加载历史失败`,empty:`尚未记录数据`},progress:`{{percent}}% 完成`,timeRemaining:`剩余 {{time}}`,deleteConfirm:`确定要删除"{{name}}"吗？`,maintenanceOk:`维护正常`,maintenanceWarning:`{{count}} 个警告`,maintenanceWarning_plural:`{{count}} 个警告`,maintenanceDue:`{{count}} 个到期`,maintenanceDue_plural:`{{count}} 个到期`,sort:{name:`名称`,status:`状态`,model:`型号`,location:`位置`,eta:`剩余时间`,ascending:`升序排列`,descending:`降序排列`},cardSize:{small:`小卡片`,medium:`中卡片`,large:`大卡片`,extraLarge:`超大卡片`},pageView:{openCamWallPage:`在独立页面中打开摄像头墙`,cards:`卡片`,camWall:`摄像头墙`},camWall:{page:{tokenRejected:`此摄像头墙链接已失效。令牌可能已过期或被撤销。`,loadFailed:`无法加载打印机。`},noPrinters:`没有可显示的打印机`,noSignal:`无信号`,live:`直播`,snap:`快照`,off:`关闭`,summary:`直播 {{live}} 个，快照 {{snap}} 个，共 {{total}} 个`,layer:`第 {{cur}}/{{total}} 层`,timeLeft:`剩余 {{time}}`,statusMode:{off:`关闭`,compact:`简洁`,full:`完整`},settings:{title:`摄像头墙设置`,maxLive:`最大直播数`,maxLiveHint:`同时直播的画面数量。其他画面以快照刷新。`,snapshotInterval:`快照刷新间隔（秒）`,snapshotIntervalHint:`非直播画面获取新快照的频率。`,statusOverlay:`状态叠加`,statusOverlayHint:`简洁：仅显示状态标签。完整：加上进度、层数、剩余时间。`}},hideOffline:`隐藏离线`,nextAvailable:`下一个可用`,powerOn:`开机`,offlinePrintersWithPlugs:`带智能插座的离线打印机`,noPrintersConfigured:`尚未配置打印机`,search:`搜索打印机...`,noSearchResults:`没有打印机符合您的搜索或筛选条件`,filter:{allStatuses:`所有状态`,allLocations:`所有位置`},toolbar:{filters:`筛选`,view:`视图`,actions:`操作`},readyToPrint:`准备打印`,external:`外部`,extL:`外置左`,extR:`外置右`,deleteArchives:`删除打印归档`,noLabel:`无标签`,printPreview:`打印预览`,width:`宽度`,height:`高度`,noObjectsFound:`未找到对象`,objectsLoadedOnPrintStart:`对象在打印开始时加载`,willBeSkipped:`将被跳过`,name:`名称`,serialCannotBeChanged:`序列号无法更改`,locationHelp:`用于分组打印机和筛选队列任务`,wifiSignal:{veryWeak:`非常弱`,weak:`弱`,fair:`一般`,good:`良好`,excellent:`优秀`},maintenanceUpToDate:`所有维护均已完成 - 点击查看`,maintenance:{title:`维护中`,subtitle:`此打印机已暂停 — 未连接、不参与队列调度、不发送通知。`,pillLabel:`维护`,exitButton:`退出维护`,menuEnter:`进入维护模式`,menuExit:`退出维护模式`,toastEntered:`{{name}} 已进入维护模式`,toastExited:`{{name}} 已恢复在线`,confirmMidPrintTitle:`在打印过程中进入维护模式？`,confirmMidPrintMessage:`{{name}} 当前正在打印。进入维护模式将断开 MQTT 连接，并停止此任务的进度跟踪和完成通知。是否继续？`,editFieldLabel:`维护模式`,editFieldHelp:`启用后，此打印机将从 MQTT、队列调度和通知中暂停 — 适用于维修、并行 Bambuddy 安装或临时停用。`},chamberLightOn:`打开腔室灯`,chamberLightOff:`关闭腔室灯`,files:`文件`,browseFiles:`浏览打印机文件`,autoOffAfterPrint:`打印后自动关机`,autoOffExecuted:`已执行自动关机 - 开启打印机以重置`,hmsErrors:`HMS 错误`,viewHmsErrors:`查看 {{count}} 个 HMS 错误`,resume:`继续`,pause:`暂停`,stop:`停止`,camera:`摄像头`,skipObject:`跳过对象`,reconnect:`重新连接`,forceRefresh:`强制刷新`,forceRefreshSuccess:`已请求刷新`,mqttDebug:`MQTT 调试`,printerInformation:`打印机信息`,copyToClipboard:`复制`,copied:`已复制！`,state:`状态`,wifiSignalLabel:`WiFi 信号`,developerMode:`开发者模式`,enabled:`已启用`,disabled:`已禁用`,addedOn:`添加日期`,sdCard:`SD 卡`,inserted:`已插入`,notInserted:`未插入`,totalPrintHours:`打印时长`,activeNozzle:`当前：{{nozzle}} 喷嘴`,amsSwitchInletTooltip:`耗材变轨器 IN-{{inlet}}（{{side}}）— 可向两个喷嘴供料`,nozzleRack:`喷嘴架`,nozzleDocked:`已停靠`,nozzleMounted:`已安装`,nozzleActive:`使用中`,nozzleIdle:`空闲`,nozzleDiameter:`直径`,nozzleType:`类型`,nozzleStatus:`状态`,nozzleFilament:`耗材`,nozzleWear:`磨损`,nozzleMaxTemp:`最高温度`,nozzleSerial:`序列号`,nozzleHardenedSteel:`硬化钢`,nozzleStainlessSteel:`不锈钢`,nozzleTungstenCarbide:`碳化钨`,nozzleFlow:`流量`,nozzleHighFlow:`高流量`,nozzleStandardFlow:`标准`,firmwareUpdate:`固件更新`,firmwareInstructions:`在打印机触摸屏上，前往`,firmwareNav:`导航到`,settings:`设置`,firmware:`固件`,discoverPrinters:`发现打印机`,searching:`搜索中...`,manualEntry:`手动输入`,addFromCloud:`从云端添加`,toast:{printerDeleted:`打印机已删除`,missingSpoolAssignment:`已在{{printer}}上开始打印。以下料槽未分配耗材: {{slots}}`,killSwitchTriggered:`计费终止开关已停止 {{printer}} 上的未授权打印：{{filename}}`,billingChargeFailed:`{{printer}} 上的 {{filename}} 计费失败。预算预留已保留；请检查服务器日志。`,assignmentVerified:`耗材已加载到料槽{{slot}}（{{printer}}）`,assignmentVerifiedNoKprofile:`{{printer}}的料槽{{slot}}已加载，但流量校准配置（K配置）未应用`,assignmentNotConfirmed:`无法确认{{printer}}上料槽{{slot}}的分配，请检查AMS料槽`,printerAdded:`打印机已添加`,printerUpdated:`打印机已更新`,failedToDelete:`删除打印机失败`,failedToAdd:`添加打印机失败`,connectionFailedNotAdded:`无法连接到打印机。请检查 IP 地址、序列号和访问码，并确认已启用仅局域网（LAN-only）模式。该打印机未被添加。`,failedToUpdate:`更新打印机失败`,commandSent:`命令已发送`,failedToSendCommand:`发送命令失败`,turnedOn:`{{name}} 已开启`,failedToPowerOn:`开启 {{name}} 失败`,scriptTriggered:`脚本已触发`,printStopped:`打印已停止`,printPaused:`打印已暂停`,printResumed:`打印已继续`,referenceDeleted:`参考已删除`,detectionAreaSaved:`检测区域已保存`,failedToRunScript:`运行脚本失败`,failedToStopPrint:`停止打印失败`,failedToPausePrint:`暂停打印失败`,failedToResumePrint:`继续打印失败`,failedToControlChamberLight:`控制腔室灯失败`,failedToSetSpeed:`设置打印速度失败`,failedToUpdateSetting:`更新设置失败`,failedToSkipObjects:`跳过对象失败`,failedToRereadRfid:`重新读取 RFID 失败`,failedToCheckPlate:`检查打印板失败`,failedToUpdateLabel:`更新标签失败`,failedToDeleteReference:`删除参考失败`,failedToSaveDetectionArea:`保存检测区域失败`,plateCheckEnabled:`打印板检查已启用`,plateCheckDisabled:`打印板检查已禁用`,calibrationSaved:`校准已保存！`,calibrationFailed:`校准失败`,rfidRereadInitiated:`已发起 RFID 重新读取`,loadInitiated:`加载耗材中…`,unloadInitiated:`卸载耗材中…`,failedToLoad:`加载耗材失败`,failedToUnload:`卸载耗材失败`},connection:{connected:`已连接`,offline:`离线`},plateStatus:{markCleared:`将打印板标记为已清理`,cleared:`打印板已清理`,notCleared:`打印板未清理`,inUse:`打印板使用中`},queue:{inQueue:`队列中有 {{count}} 个打印任务`,inQueue_plural:`队列中有 {{count}} 个打印任务`},controls:`控制`,rfid:{reread:`重新读取 RFID`},ams:{load:`加载`,unload:`卸载`,feedTitle:`将 {{slot}} 装载到哪个喷嘴？`,feedPrompt:`Filament Track Switch 可以把该槽位送往任一热端。请选择要送入的一侧。`,feedLeft:`左喷嘴`,feedRight:`右喷嘴`,feedAlreadyLoaded:`已装载`,switchNotReady:`Filament Track Switch 尚未设置。请在打印机上为每个 AMS 分配入口后重试。`},bedJog:{limitWarning:`手动移动时不会强制执行行程限位——Bambu 固件存在缺陷，远程指令会忽略软件限位。请小心移动以避免碰撞。`,title:`点动控制`,bed:`热床`,step:`步长 (mm)`,up:`热床上移`,down:`热床下移`,toolheadUp:`喷头上移`,toolheadDown:`喷头下移`,disabledWhilePrinting:`打印中已禁用`,notHomedTitle:`打印机未归零`,notHomedMessage:`打印机自上次打印以来尚未归零。请先执行自动归零以确保安全定位（先停放喷头，然后归零 X、Y 和 Z），或者直接移动 — 软限位将被绕过。`,homeZ:`自动归零`,moveAnyway:`强制移动`,homingStarted:`打印机自动归零中…`},permission:{noAdd:`您没有添加打印机的权限`,noEdit:`您没有编辑打印机的权限`,noDelete:`您没有删除打印机的权限`,noControl:`您没有控制打印机的权限`,noFiles:`您没有访问打印机文件的权限`,noAmsRfid:`您没有重新读取 AMS RFID 的权限`,noSmartPlugControl:`您没有控制智能插座的权限`,noCamera:`您没有查看摄像头的权限`},modal:{addTitle:`添加打印机`,editTitle:`编辑打印机`,myPrinter:`我的打印机`,selectModel:`选择型号...`,locationGroup:`位置 / 分组（可选）`,locationPlaceholder:`例如：工作室、办公室、地下室`,autoArchiveLabel:`自动归档已完成的打印`,fromPrinterSettings:`来自打印机设置`,modelOptional:`型号（可选）`,saveChanges:`保存更改`},skipObjects:{tooltip:`跳过对象`,onlyWhilePrinting:`跳过对象（仅在打印时）`,requiresMultiple:`跳过对象（需要2个以上对象）`,title:`跳过对象`,matchIdsInfo:`将 ID 与打印机显示屏上的 ID 进行对照`,printerShowsIds:`打印机屏幕上显示构建板上对象的 ID`,skipSelected:`跳过所选`,skipping:`跳过中...`,noObjectsSelected:`未选择对象`,selectObjectsToSkip:`选择要从当前打印中跳过的对象`,skipped:`已跳过`,objectsSkipped:`对象已跳过`,activeCount:`{{count}} 个活跃`,waitForLayer:`等待第2层以上才能跳过对象（当前第 {{layer}} 层）`,skip:`跳过`,confirmTitle:`跳过对象？`,confirmMessage:`确定要跳过"{{name}}"吗？此操作无法撤销。`,confirmAllMessage:`已选择所有剩余对象。这将停止打印任务。是否继续？`,confirmMultipleMessage:`跳过选中的 {{count}} 个对象？此操作无法撤销。`},confirm:{deleteTitle:`删除打印机`,deleteMessage:`确定要删除"{{name}}"吗？这将移除所有连接设置。`,deleteArchivesNote:`此打印机的所有打印历史将被永久删除。`,keepArchivesNote:`打印历史将保留，但不再与此打印机关联。`,stopTitle:`停止打印`,stopMessage:`确定要停止"{{name}}"上的当前打印吗？这将取消打印任务。`,stopButton:`停止打印`,pauseTitle:`暂停打印`,pauseMessage:`确定要暂停"{{name}}"上的当前打印吗？`,pauseButton:`暂停打印`,resumeTitle:`继续打印`,resumeMessage:`确定要继续"{{name}}"上的打印吗？`,resumeButton:`继续打印`,powerOnTitle:`开启打印机`,powerOnMessage:`确定要打开"{{name}}"的电源吗？`,powerOnButton:`开机`,powerOffTitle:`关闭打印机`,powerOffMessage:`确定要关闭"{{name}}"的电源吗？`,powerOffWarning:`警告："{{name}}"正在打印中！确定要关闭电源吗？这将中断打印并可能损坏打印机。`,powerOffButton:`关机`,haToggleTitle:`切换"{{name}}"`,haToggleMessage:`切换 Home Assistant 实体 {{entity}}？如果当前为开启状态，可能会关闭电源。`,haToggleWarning:`警告："{{name}}"正在打印中！切换 {{entity}} 可能会切断电源并中断打印。是否继续？`,haToggleButton:`切换`},bulk:{select:`选择`,selectAll:`全选`,selectByLocation:`按位置选择`,selected:`已选择{{count}}台`,actions:{stop:`停止`,pause:`暂停`,resume:`继续`,clearPlate:`清除打印床`,clearHMS:`清除通知`},confirm:{stopTitle:`停止{{count}}个打印任务`,stopMessage:`这将取消{{count}}台打印机上的活动打印任务。此操作无法撤销。`,stopButton:`全部停止`,pauseTitle:`暂停{{count}}个打印任务`,pauseMessage:`这将暂停{{count}}台打印机上的活动打印任务。`,pauseButton:`全部暂停`,clearPlateTitle:`清除{{count}}个打印床`,clearPlateMessage:`这将清除{{count}}台打印机的打印床，可能会触发队列中的任务。`,clearPlateButton:`全部清除`},success:`{{action}}已在{{count}}台打印机上完成`,partial:`{{succeeded}}成功，{{failed}}失败`,noneApplicable:`没有选中的打印机处于适合此操作的状态`,selectByState:`按状态选择`},discovery:{title:`发现打印机`,searching:`搜索中...`,scanning:`扫描中...`,scanProgress:`扫描中... {{scanned}}/{{total}}`,foundPrinters:`发现 {{count}} 台打印机`,noPrintersFound:`未找到打印机`,noPrintersFoundSubnet:`在指定子网中未找到打印机。`,noPrintersFoundNetwork:`在网络上未找到打印机。`,allConfigured:`所有发现的打印机已配置完毕。`,alreadyAdded:`已添加`,select:`选择`,manualEntry:`手动输入`,addFromCloud:`从云端添加`,subnetToScan:`要扫描的子网`,dockerNote:`检测到 Docker 环境。请以 CIDR 格式输入打印机所在子网。需要在 docker-compose.yml 中设置 network_mode: host。`,scanSubnet:`扫描子网查找打印机`,discoverNetwork:`在网络上发现打印机`,scanningSubnet:`正在扫描子网查找拓竹打印机...`,scanningNetwork:`正在扫描网络...`,serialRequired:`需要序列号`,unknown:`未知`,failedToStart:`启动发现失败`,customSubnetOption:`自定义子网...`,customSubnetLabel:`自定义子网 (CIDR)`,customSubnetNote:`如果您的打印机与此服务器位于不同的网络中，请使用自定义子网。FTP (990) 和 MQTT (8883) 端口必须能够跨路由边界访问。`},drying:{start:`开始干燥`,stop:`停止干燥`,temperature:`温度`,duration:`时长`,hours:`小时`,timeRemaining:`剩余 {{time}}`,active:`干燥中`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`不支持干燥`,powerRequired:`连接AMS电源适配器以启用干燥`,cannotDryNow:`AMS 当前无法开始干燥`,startingDrying:`正在启动干燥...`,toastCommandSent:`已发送干燥命令`,toastStopped:`已停止干燥`,toastNotStarted:`打印机已接受命令，但 AMS 未开始干燥。请检查 AMS 电源适配器是否已连接，以及打印机是否处于空闲状态。`,screenOnly:`此打印机的 AMS 干燥只能在打印机自带的屏幕上操作（Bambu 的限制）`,stoppingDrying:`正在停止干燥...`,rotateTray:`干燥时旋转料盘`,rotateUnavailableReason:`不可用 — 此 AMS 中有插槽已装入打印头。料盘被送料管固定，无法旋转。请先回退耗材。`,startMode:`开始时间`,modeNow:`立即`,modeDelay:`延迟后`,modeAtTime:`指定时间`,schedule:`预约`,scheduledFor:`干燥已预约：{{time}}`,scheduledAsap:`干燥已预约（等待打印机）`,cancelScheduled:`取消预约干燥`,scheduleFailed:`预约干燥失败`,retractFilament:`请退回AMS出口处的耗材后再开始干燥`,waitingAmsNotFound:`正在等待检测到AMS`,waitingOffline:`正在等待打印机上线`,waitingPrinterBusy:`正在等待打印机空闲`,waitingAlreadyDrying:`正在等待当前干燥周期结束`,waitingInterrupted:`已中断，将在打印机空闲后重新开始`,scheduleFailedReason:`预约干燥失败：{{reason}}`,scheduleFailedUnknown:`未知错误`,dismissFailed:`忽略`},amsBackup:{titleOn:`AMS 备用料盘已开启。点击以禁用。`,titleOff:`AMS 备用料盘已关闭。点击以启用。`,titleUnknown:`本打印机不支持读取 AMS 备用料盘状态。`,toastEnabled:`AMS 备用料盘已启用`,toastDisabled:`AMS 备用料盘已禁用`,modalTitle:`AMS 备用料盘`,modalHelp:`当前料槽用尽时，打印机会按此顺序在使用相同预设和颜色的料槽之间循环。`,modalNoSlots:`未加载耗材。`,modalNoPairs:`没有备用料盘对 — 没有两个料槽同时匹配预设和颜色。`,extruderRightShort:`右`,extruderLeftShort:`左`,stateOn:`已启用`,stateOff:`已禁用`,stateUnknown:`此打印机不支持`},activeJobSlot:{title:`此料槽在当前打印中是耗材 {{n}}`,ariaLabel:`当前打印料槽 {{n}}`},expectedSlot:{title:`打印机正在等待此料槽装入耗材`,ariaLabel:`需要装料的料槽 {{n}}`,label:`{{ams}} · 料槽 {{slot}}`,external:`外部料卷`},filaments:`耗材`,externalSpool:{hide:`隐藏外部料卷`,show:`显示外部料卷`},openCameraOverlay:`打开摄像头叠加层`,openCameraWindow:`在新窗口中打开摄像头`,firmwareUpdateAvailable:`固件更新可用：{{current}} → {{latest}}`,firmwareUpToDate:`固件 {{version}} — 已是最新`,firmwareUpdateButton:`更新`,plateDetection:{noPermission:`您没有更新打印机的权限`,enabledClick:`打印板检查已启用 - 点击禁用`,disabledClick:`打印板检查已禁用 - 点击启用`,manageCalibration:`管理打印板检测校准`,calibrationRequired:`需要校准`,calibrationInstructions:`请确保构建板<strong>完全空置</strong>，然后点击校准。`,calibrationDescription:`校准会拍摄空置打印板的参考图像。后续检查将与此参考进行比较以检测物体。`,calibrationTip:`<strong>提示：</strong>您最多可以为不同的打印板存储5个校准。系统会在检查时自动使用最佳匹配。`,plateEmpty:`打印板似乎是空的`,objectsDetected:`在打印板上检测到物体`,confidence:`置信度`,difference:`差异`,analysisPreview:`分析预览：`,analysisLegend:`绿色框 = 检测区域，红色覆盖 = 与校准的差异`,savedReferences:`已保存的参考 ({{count}}/{{max}})`,deleteReference:`删除参考`,labelPlaceholder:`标签...`,clickToEdit:`{{label}} - 点击编辑`,clickToAddLabel:`点击添加标签`},speed:{title:`打印速度`,silent:`静音 (50%)`,standard:`标准 (100%)`,sport:`运动 (124%)`,ludicrous:`疯狂 (166%)`},airduct:{title:`风道模式`,cooling:`制冷`,heating:`加热`},noSdCard:`无SD`,door:{open:`开`,closed:`关`},fans:{partCooling:`零件冷却风扇`,auxiliary:`辅助风扇`,leftAuxiliary:`左辅助风扇`,exhaust:`排气`,chamber:`腔室风扇`},clickToViewHmsErrors:`点击查看 HMS 错误`,aiDetection:{safe:`安全`,warning:`警告`,failure:`失败`,idle:`空闲`,error:`未检测`,unknown:`启动中`,tooltipError:`AI 故障检测未检测此次打印：{{reason}} - 点击查看详情`,tooltipUnknown:`AI 故障检测：正在等待首个结果 - 点击查看详情`,errorHint:`本次打印未被检测。下方问题解决后，检测将自动恢复。`,tooltip:`AI 故障检测：{{status}}（评分 {{score}}）- 点击查看详情`,tooltipIdle:`AI 故障检测已启用 - 下次打印时开始监控 - 点击查看详情`,modalTitle:`AI 故障检测 - {{name}}`,currentStatus:`状态`,score:`评分`,framesAnalyzed:`已分析帧数`,idleHint:`当前没有正在监控的打印。下次打印时将自动开始监控。`,lastError:`最近错误`,openSettings:`打开设置`},estimatedCompletion:`预计完成时间`,plateNumber:`板 {{number}}`,slotOptions:`槽位选项`,amsPopup:{friendlyName:`AMS 名称`,friendlyNamePlaceholder:`例如 AMS 友好名称`,serialNumber:`序列号`,firmwareVersion:`固件`,save:`保存`,clear:`清除`,noEditPermission:`您没有重命名 AMS 单元的权限`},firmwareModal:{title:`固件更新`,titleUpToDate:`固件信息`,currentVersion:`当前版本：`,latestVersion:`最新版本：`,releaseNotes:`发布说明`,checkingPrereqs:`正在检查前提条件...`,sdCardReady:`SD 卡已就绪。点击下方上传固件。`,uploadedSuccess:`固件已上传到 SD 卡！`,applyInstructions:`在打印机上应用更新：`,step1:`在打印机触摸屏上，前往<strong>设置</strong>`,step2:`导航到<strong>固件</strong>`,step3:`选择<strong>从 SD 卡更新</strong>`,step4:`更新将需要 10-20 分钟`,done:`完成`,starting:`启动中...`,uploadFirmware:`上传固件`,uploadFailed:`上传启动失败：{{error}}`,uploadedToast:`固件已上传！请在打印机屏幕上触发更新。`,availableVersions:`可用版本`,usable:`可用`,unavailable:`不可用`,installed:`已安装`,newerBadge:`较新`,olderBadge:`较旧`,currentBadge:`当前`},accessCodePlaceholder:`留空以保持当前值`,roi:{title:`检测区域 (ROI)`,xStart:`X 起点`,yStart:`Y 起点`,width:`宽度`,height:`高度`,instruction:`调整检测区域以聚焦到构建板。预览中的绿色框显示当前区域。`},developerModeWarning:`以下打印机未启用开发者局域网模式：{{names}}。某些功能可能无法使用。`,howToEnable:`如何启用`,incompatibleFile:`此文件是为 {{slicedFor}} 切片的，但该打印机是 {{printerModel}}`,dropNotPrintable:`只能打印 .gcode 和 .gcode.3mf 文件`,dropToPrint:`拖放以打印`,dropToQueue:`拖放以加入队列`},archives:{media:{title:`打印视频`,download:`下载打印视频`,searching:`正在检查打印机中的视频…`,searchFailed:`无法检查打印机中的视频。`,none:`未找到此打印任务的延时摄影或 IP 摄像头视频片段。`,attachedTimelapse:`已附加的延时摄影`,printerFiles:`仍保存在打印机上的文件`,downloadSelected:`下载所选文件`,printerMissing:`打印机已不在配置中`,timelapseUnavailable:`无法读取延时摄影目录`,ipcamUnavailable:`无法读取 IP 摄像头目录`},title:`打印归档`,no3mfBanner:{title:`最近的一些打印未能附带缩略图归档`,body:`切片机没有在打印机的 SD 卡上留下 .gcode.3mf 文件，因此 Bambuddy 无法获取缩略图或切片机元数据。这通常是因为切片机 (Bambu Studio / OrcaSlicer 的设备选项卡) 中"将发送的文件存储在外部存储中"已关闭。`,docsLink:`查看安装步骤 4`,docsLinkInternalStorage:`为什么会这样`,titleInternalStorage:`最近有些打印留在了打印机的内部存储中`,bodyInternalStorage:`Bambu Studio 把切片文件保存到了打印机的内部存储而不是存储卡上，因此 Bambuddy 通过 FTP 读不到任何东西。在 H2 系列、P2S 和 X2D 上，「打印」按钮总是这样做，只有「发送」才提供选择，而它的默认值也是「缓存」。这些打印仍会带着名称和时间归档，只是没有缩略图和切片元数据。要获得完整归档，请从 Bambuddy 启动打印，或改用 OrcaSlicer 切片；若要继续用 Bambu Studio，请用「发送」并选择「外部存储」，之后再启动打印。以上都需要打印机中插有存储卡或 U 盘。`,titleNoExternalStorage:`最近有些打印无法归档 — 打印机中没有存储介质`,bodyNoExternalStorage:`打印机的插槽中未检测到存储卡或U盘，切片文件无处存放，Bambuddy 也无从读取。插入一个，下次打印就会完整归档。`,titleInternalHistory:`最近有些打印是从打印机里已有的文件启动的`,bodyInternalHistory:`这些打印来自打印机自己的文件库 — 从它的屏幕重新打印、从 Handy 启动，或是先前发送、稍后才打印的文件。Bambuddy 通过 FTP 读取打印文件，而 FTP 只提供存储卡或 U 盘，打印机却把这个文件库放在 FTP 够不到的区域，所以没有 3MF 可读。切片软件的任何设置都改变不了这一点，因为这些打印根本没有发送过文件。它们仍会带着名称和时间归档，并且可以在「编辑归档」里手动填写已用耗材。要获得完整归档，请从 Bambuddy 或你的切片软件启动打印。`,titleFtpsCooloff:`最近有些打印无法归档 — 打印机拒绝了文件连接`,bodyFtpsCooloff:`Bambuddy 打开了打印机的文件传输端口 (FTPS 990)，而打印机回应的内容并不是 TLS，因此无法从它读取任何东西。这些打印仍会带着名称和时间归档，只是没有缩略图和切片元数据。这不是切片软件的设置，也不是你改动了什么 —— 相同型号、相同固件在别的安装上运行正常，受影响的打印机通常过一阵子会自行恢复。出现这种失败后，Bambuddy 会暂停对该打印机的传输五分钟，暂停结束后再回来取文件，所以短暂的一次会自行补全；卡片仍然是空的，说明拒绝持续得比重试更久。触发原因目前尚不清楚。如果反复出现，请在系统页面打开调试日志，并把支持包附在你的报告里。`,titleFtpTransferFailed:`部分近期打印未能归档 — 文件传输超时`,bodyFtpTransferFailed:`切片文件就在打印机的存储卡上，打印机也确实开始传输了，但传输未能在允许的时间内完成。打印开始时，打印机还要同时处理摄像头、状态消息和作业上传，较大的 3MF 文件未必能在这种情况下传完。这些打印仍然保留了名称和时间，只是缺少缩略图和切片数据。这不是切片软件的设置问题，也不是你改动造成的。Bambuddy 会在接下来的十分钟内再取三次文件，因此多数情况会自行补齐；如果卡片仍然是空的，说明那几次尝试同样超时了。若经常出现，请在 设置 > 网络 > FTP 重试 中调高 连接超时。`,dismissLabel:`关闭此通知`},searchPlaceholder:`搜索归档...`,filterByPrinter:`按打印机筛选`,filterByStatus:`按状态筛选`,sortBy:`排序方式`,sortNewest:`最新优先`,sortOldest:`最旧优先`,sortName:`名称`,sortDuration:`时长`,sortLargest:`最大优先`,sortSmallest:`最小优先`,sortSize:`大小`,noArchives:`未找到归档`,noArchivesSearch:`没有匹配搜索的归档`,originalPrintNotVisible:`原始打印不可见 - 请尝试清除筛选条件`,noArchivesYet:`暂无归档`,prints:`条打印`,pagination:{showing:`显示`,to:`至`,of:`共`,show:`每页`,page:`页`,all:`全部`},loadingArchives:`加载归档中...`,releaseToUpload:`释放以上传`,showAll:`显示全部`,showFavoritesOnly:`仅显示收藏`,gridView:`网格视图`,listView:`列表视图`,calendarView:`日历视图`,logView:`打印日志`,manageTags:`管理标签`,showFailedPrints:`显示失败的打印`,hideFailedPrints:`隐藏失败的打印`,hideDuplicates:`隐藏重复项`,viewOriginalPrint:`点击查看原始打印 (#{{id}})`,printTime:`打印时间`,filamentUsed:`耗材用量`,cost:`成本`,preview:`预览`,deleteArchive:`删除归档`,deleteConfirm:`确定要删除此归档吗？`,favorite:`收藏`,unfavorite:`取消收藏`,viewDetails:`查看详情`,status:{completed:`已完成`,failed:`失败`,stopped:`已停止`},toast:{source3mfAttached:`源 3MF 已附加：{{filename}}`,failedUploadSource3mf:`上传源 3MF 失败`,source3mfRemoved:`源 3MF 已移除`,failedRemoveSource3mf:`移除源 3MF 失败`,f3dAttached:`F3D 已附加：{{filename}}`,failedUploadF3d:`上传 F3D 失败`,f3dRemoved:`F3D 已移除`,failedRemoveF3d:`移除 F3D 失败`,timelapseAttached:`延时摄影已附加：{{filename}}`,timelapseAlreadyAttached:`延时摄影已附加`,noMatchingTimelapse:`未找到匹配的延时摄影`,failedScanTimelapse:`扫描延时摄影失败`,failedAttachTimelapse:`附加延时摄影失败`,timelapseRemoved:`延时摄影已移除`,failedRemoveTimelapse:`移除延时摄影失败`,timelapseUploaded:`延时摄影已上传：{{filename}}`,failedUploadTimelapse:`上传延时摄影失败`,archiveDeleted:`归档已删除`,failedDeleteArchive:`删除归档失败`,addedToFavorites:`已添加到收藏`,removedFromFavorites:`已从收藏中移除`,projectUpdated:`项目已更新`,failedUpdateProject:`更新项目失败`,linkCopied:`链接已复制到剪贴板`,failedCopyLink:`复制链接失败`,photoDeleted:`照片已删除`,failedDeletePhoto:`删除照片失败`,failedDeleteArchives:`删除归档失败`,failedUpdateFavorites:`更新收藏失败`,exportDownloaded:`导出已下载`,exportFailed:`导出失败`},menu:{print:`打印`,openInBambuStudio:`在切片软件中打开`,slice:`切片`,externalLink:`外部链接`,viewOnMakerWorld:`在 MakerWorld 上查看`,preview3d:`3D 预览`,viewTimelapse:`查看延时摄影`,scanForTimelapse:`扫描延时摄影`,uploadTimelapse:`上传延时摄影`,removeTimelapse:`移除延时摄影`,downloadSource3mf:`下载源 3MF`,uploadSource3mf:`上传源 3MF`,replaceSource3mf:`替换源 3MF`,removeSource3mf:`移除源 3MF`,uploadF3d:`上传 F3D`,replaceF3d:`替换 F3D`,downloadF3d:`下载 F3D`,removeF3d:`移除 F3D`,download:`下载`,copyDownloadLink:`复制下载链接`,qrCode:`二维码`,viewPhotos:`查看照片`,viewPhotosCount:`查看照片 ({{count}})`,projectPage:`项目页面`,addToFavorites:`添加到收藏`,removeFromFavorites:`从收藏中移除`,edit:`编辑`,printLog:`打印记录`,goToProject:`前往项目：{{name}}`,addToProject:`添加到项目`,removeFromProject:`从项目中移除`,loading:`加载中...`,noProjectsAvailable:`无可用项目`,searchProjects:`搜索项目…`,select:`选择`,deselect:`取消选择`,delete:`删除`},permission:{noReprint:`您没有重新打印此归档的权限`,noAddToQueue:`您没有添加到队列的权限`,noUpdateArchives:`您没有更新归档的权限`,noUploadFiles:`您没有上传文件的权限`,noDownload:`您没有下载归档的权限`,noCopyLink:`您没有复制下载链接的权限`,noDelete:`您没有删除此归档的权限`,noEdit:`您没有编辑此条目的权限`,noCreate:`您没有创建归档的权限`},platePicker:{title:`选择要预览的打印板`,hint:`此存档包含多个打印板。选择一个在 GCode 查看器中打开。`,plateLabel:`打印板 {{index}}`,objectCount:`{{count}} 个对象`,objectCount_plural:`{{count}} 个对象`,noGcode:`此存档没有可预览的已切片 G 代码。请先在 Bambu Studio 中打开并切片。`},card:{previousPlate:`上一个板`,nextPlate:`下一个板`,plateNumber:`板 {{index}}`,moreOptions:`右键查看更多选项`,addToFavorites:`添加到收藏`,removeFromFavorites:`从收藏中移除`,cancelled:`已取消`,failed:`失败`,duplicate:`重复`,duplicateTitle:`此模型之前已打印过`,openSource3mf:`在 Bambu Studio 中打开源 3MF（右键查看更多选项）`,downloadF3d:`下载 Fusion 360 设计文件`,viewTimelapse:`查看延时摄影`,viewPhoto:`查看 1 张照片`,viewPhotos:`查看 {{count}} 张照片`,openFolder:`打开文件夹：{{name}}`,slicedFile:`已切片文件 - 可以打印`,sourceFile:`仅源文件 - 无 AMS 映射可用`,gcode:`GCODE`,source:`源文件`,project:`项目：{{name}}`,runsBadge:`{{count}} 次打印`,runsBadgeTitle:`共 {{count}} 次打印 — 成功 {{successful}} 次，失败 {{failed}} 次。点击查看完整打印记录。`,estimated:`预计：{{time}}`,actual:`实际：{{time}}`,accuracy:`准确度：{{percent}}%`,filament:`{{weight}} 克`,layer:`{{count}} 层`,layers:`{{count}} 层`,object:`{{count}} 个对象`,objects:`{{count}} 个对象`,slicedFor:`为 {{model}} 切片`,uploadedBy:`上传者`,noPermissionReprint:`您没有重新打印的权限`,noFileForReprint:`无可用的 3MF 文件 — 打印记录时无法从打印机下载该文件`,slicerAmsMapping:`已保存 AMS 映射（{{printer}}）`,slicerAmsMappingTooltip:`切片软件选择的 AMS 槽位已为 {{printer}} 保存。槽位编号只在该打印机上有意义，因此只有再次发往 {{printer}} 时，重新打印才会复用它们。`,noPermissionEdit:`您没有编辑归档的权限`,noPermissionDelete:`您没有删除归档的权限`,openInBambuStudio:`在切片软件中打开`,openInBambuStudioToSlice:`在切片软件中打开进行切片`,slice:`切片`,externalLink:`外部链接`,makerWorld:`MakerWorld：{{designer}}`,viewProject:`查看项目`,noExternalLink:`无外部链接`,preview3d:`3D 预览`,download:`下载`,edit:`编辑`,delete:`删除`},runLog:{title:`打印记录`,modalTitle:`打印记录 — {{name}}`,modalTitleFallback:`此归档`,empty:`此归档尚未记录任何打印事件。`,col:{date:`日期`,status:`状态`,duration:`时长`,filament:`耗材`,cost:`成本`},status:{completed:`已完成`,failed:`失败`,cancelled:`已取消`,stopped:`已停止`,skipped:`已跳过`,printing:`打印中`}},modal:{deleteArchive:`删除归档`,deleteConfirm:`确定要删除"{{name}}"吗？此操作无法撤销。`,deleteButton:`删除`,deletePurgeStats:`同时从快速统计中删除此打印（耗材、时间、成本、能耗）`,deleteQueueItemsWarning:`与此归档关联的 {{count}} 个队列项也将被移除。`,deleteBlockedByPrinting:`无法删除 — {{count}} 个队列项正在打印。请先停止打印再重试。`,removeSource3mf:`移除源 3MF`,removeSource3mfConfirm:`确定要从"{{name}}"中移除源 3MF 文件吗？这将删除原始切片项目文件。`,removeButton:`移除`,removeF3d:`移除 F3D`,removeF3dConfirm:`确定要从"{{name}}"中移除 Fusion 360 设计文件吗？`,removeTimelapse:`移除延时摄影`,removeTimelapseConfirm:`确定要从"{{name}}"中移除延时摄影视频吗？`,timelapse:`{{name}} - 延时摄影`,selectTimelapse:`选择延时摄影`,selectTimelapseDesc:`未找到自动匹配。请选择此打印的延时摄影：`,deleteArchives:`删除归档`,deleteArchivesConfirm:`确定要删除 {{count}} 个归档吗？此操作无法撤销。`,deleteCount:`删除 {{count}} 个`},page:{title:`归档`,printsCount:`{{filtered}} / {{total}} 次打印`,dropFilesHere:`将 .3mf 文件拖放到此处`,releaseToUpload:`释放以上传`,only3mfSupported:`仅支持 .3mf 文件`,close:`关闭`,selected:`已选择 {{count}} 个`,selectAll:`全选`,tags:`标签`,project:`项目`,favorite:`收藏`,delete:`删除`,toggledFavorites:`已切换 {{count}} 个归档的收藏状态`,failedUpdateFavorites:`更新收藏失败`,archivesDeleted:`已删除 {{count}} 个归档`,failedDeleteArchives:`删除归档失败`,photoDeleted:`照片已删除`,failedDeletePhoto:`删除照片失败`},list:{name:`名称`,printer:`打印机`,date:`日期`,size:`大小`,actions:`操作`,hasTimelapse:`有延时摄影`},log:{date:`日期`,printName:`打印名称`,printer:`打印机`,user:`用户`,status:`状态`,duration:`时长`,filament:`耗材`,filamentUsed:`耗材用量`,cost:`成本`,energy:`电量`,energyCost:`电费`,completedAt:`完成时间`,columns:`列`,sortBy:`按{{column}}排序`,allPrinters:`所有打印机`,allUsers:`所有用户`,allStatuses:`所有状态`,cancelled:`已取消`,skipped:`已跳过`,dateFrom:`从`,dateTo:`到`,noEntries:`未找到打印日志条目`,showing:`显示 {{count}} / {{total}} 条`,rowsPerPage:`行数`,page:`页`,prev:`上一页`,next:`下一页`,clearLog:`清除日志`,clearLogTitle:`清除打印日志`,clearLogConfirm:`所有打印日志条目将被永久删除。归档和队列项目不受影响。此操作无法撤销。确定要继续吗？`,clearLogButton:`全部清除`,cleared:`已清除 {{count}} 条日志`,clearFailed:`清除打印日志失败`,deleteEntryTitle:`删除打印日志条目`,deleteEntryConfirm:`此条目将从日志中删除，其耗材、时间和成本贡献也将从快速统计中移除。对应的归档（如果有）不受影响。此操作无法撤销。`,entryDeleted:`已删除打印日志条目`,entryDeleteFailed:`删除打印日志条目失败`,editEntryTitle:`编辑打印日志条目`,editEntryDescription:`对这次打印进行分类。故障分析小部件按这些值分组，因此更新会立即反映在统计数据中。`,entryUpdated:`已更新打印日志条目`,entryUpdateFailed:`更新打印日志条目失败`,statuses:{completed:`已完成`,failed:`失败`,stopped:`已停止`,cancelled:`已取消`,skipped:`已跳过`}}},dispatchToast:{untitled:`打印任务`,startingPrints:`正在开始打印`,progressSummary:`{{complete}}/{{total}} 已完成 • 处理中: {{processing}}`,expandDetails:`展开派发详情`,collapseDetails:`收起派发详情`,awaitingPrinter:`等待打印机响应…`,status:{processing:`处理中`,completed:`已完成`,failed:`失败`},failed:{generic:`派发失败`,upload_failed:`上传到打印机失败`,start_command_failed:`打印机拒绝了开始命令`},dismiss:`关闭`},pipelineRuns:{title:`流水线运行`,loading:`加载中…`,empty:`暂无流水线运行。`,filter:{pipeline:`流水线`,status:`状态`,target:`目标`,all:`全部`,allPipelines:`全部流水线`,allStatus:`全部状态`,allTargets:`全部目标`,clear:`清除筛选`,noMatches:`没有运行匹配当前筛选条件。`},totalCount_one:`{{n}} 次运行`,totalCount_other:`{{n}} 次运行`,copies:`{{n}} 份`,failedCount:`{{n}} 失败`,copyN:`副本 {{n}}`,retryFailed:`重试失败的`,retryOf:`#{{n}} 的重试`,pagination:`{{total}} 中的 {{start}}–{{end}}`,toast:{cancelled:`运行已取消`,cancelFailed:`取消失败`,retryStarted:`已开始重试`,retryFailed:`重试失败`,cleared:`已清除 {{n}} 次运行`,clearFailed:`清除失败`},clearLog:`清除日志`,clearConfirmTitle:`清除日志？`,clearConfirmBody:`删除所有已完成、失败、已取消和部分失败的流水线运行？进行中的运行将保留。此操作无法撤销。`,clearConfirmAction:`清除`,jobStatus:{pending:`等待中`,awaiting_printer:`等待打印机`,queued:`排队中`,printing:`打印中`,completed:`已完成`,failed:`失败`,cancelled:`已取消`},cancelledByUser:`用户已取消`},queue:{filamentShort:{rowBadge:`所分配料盘的耀丝不足`,rowTooltip:`调度程序已标记该项。点击播放查看各插槽的赤字并决定是否仍要打印。`,confirmTitle:`耀丝不足`,confirmIntro:`所分配的料盘至少有一个插槽无法满足。仍要打印吗？`,lineItem:`插槽 {{slot}}：需要 {{required}} g，剩余 {{remaining}} g`,unknown:`未知`,printAnyway:`仍要打印`},slicerAmsMapping:{rowBadge:`已为此打印机保存 AMS 槽位`,rowTooltip:`此存档保留了切片软件选择的确切 AMS 槽位，并为该项目的目标打印机保存。在该打印机上重新打印时，可复用这些料盘，而不必再按类型和颜色重新匹配。`},title:`打印队列`,subtitle:`排程和管理您的打印任务`,editQueueItem:`编辑队列项目`,selectAllPlates:`选择全部 {{count}} 个热床`,deselectAll:`取消全选`,printQueued:`已加入打印队列`,printQueuedWillStartWhenIdle:`打印机空闲时将开始`,itemsQueued:`{{count}} 个任务已加入队列`,sending:`发送中...`,sendingProgress:`发送中 {{current}}/{{total}}...`,adding:`添加中...`,addingProgress:`添加中 {{current}}/{{total}}...`,savingProgress:`保存中 {{current}}/{{total}}...`,clearQueue:`清空队列`,clearHistory:`清除历史`,emptyQueue:`队列为空`,position:`位置`,scheduledTime:`排程时间`,moveUp:`上移`,moveDown:`下移`,startNow:`立即开始`,printingInProgress:`打印进行中...`,viewArchive:`查看归档`,viewInFileManager:`在文件管理器中查看`,itemCount:`{{count}} 个项目`,itemCount_plural:`{{count}} 个项目`,dragToReorder:`拖动以重新排序（仅限尽快）`,reorderHint:`位置仅影响"尽快"项目。排程项目按设定时间运行。`,sjf:{label:`SJF`,tooltip:`最短任务优先 — 调度器优先处理较短的打印任务`},addedBy:`由 {{name}} 添加`,nextInQueue:`队列中的下一个`,clearPlateSuccess:`打印板已清理 — 准备进行下一个打印`,plateNumber:`板 {{index}}`,quantity:`数量`,quantityHint:`创建 {{count}} 个队列项目`,plateQuantityLabel:`{{plate}} 的打印次数`,plateQuantityTotal_one:`共 {{count}} 次`,plateQuantityTotal_other:`共 {{count}} 次`,batchOrders:{title:`批量订单`,emptyTitle:`暂无批量订单`,emptyDescription:`将多盘文件或同一盘的多份副本加入队列，订单就会连同进度显示在这里。`,filter:{active:`进行中`,completed:`已完成`,cancelled:`已取消`,all:`全部`},status:{active:`进行中`,completed:`已完成`,cancelled:`已取消`},noTargets:`仅分组`,noTargetsHint:`创建于按盘目标数量之前，因此跟踪的是已入队的打印，而不是目标数量。`,dispatchRemaining:`将剩余 {{count}} 个加入队列`,dispatchPlate:`将剩余加入队列`,strandedPlate:`没有可复制设置的记录`,strandedNotice:`仍欠的 {{owed}} 次打印中有 {{runs}} 次无法加入队列：该板已没有可复制设置的队列中或已完成的打印。请从文件中将该板加入队列一次，或取消该订单。`,dispatched:`已将 {{name}} 的剩余打印加入队列`,plateProgress:`已完成 {{completed}}/{{target}}`,remaining:`还差 {{count}} 个`,failed:`{{count}} 个失败`,printing:`{{count}} 个打印中`,wholeFile:`整个文件`,due:`截止 {{date}}`,costSoFar:`已花费 {{amount}}`,costRemaining:`(还需 {{amount}})`},activeBatches:`活跃批次`,batchProgress:`已完成 {{completed}}/{{total}}`,cancelBatch:`取消剩余`,batchCancelled:`已取消剩余批次项目`,cancelBatchConfirmTitle:`取消批次`,cancelBatchConfirmMessage:`结束此订单？仍在队列中的打印将被取消，订单也不再要求尚未产出的部分。`,batch:{defaultName:`批次`,label:`{{count}} 项`,label_plural:`{{count}} 项`,pendingCount:`{{count}} 待处理`,pendingCount_plural:`{{count}} 待处理`,expand:`展开批次`,collapse:`折叠批次`,groupAsBatch:`组合为批次…`,groupAsBatchDescription:`将选中的 {{count}} 项组合为一个可折叠的批次。`,nameLabel:`批次名称`,namePlaceholder:`例如：周五礼物`,create:`创建批次`,ungroup:`取消分组`,ungroupConfirmTitle:`取消批次分组？`,ungroupConfirmMessage:`项目将保留在队列中，但不再分组在一起。`,dragGroup:`拖动批次`},tabs:{batches:`批次`,queue:`队列`,history:`历史`,timeline:`时间线`,pipelines:`流水线`},layout:{flatList:`列表`,byPrinter:`按打印机`,groupByPrinter:`按打印机分组`},history:{emptyTitle:`暂无历史`,emptyDescription:`已完成、已取消和失败的打印将在此显示。`,showMore:`显示更多`,showingCount:`显示 {{total}} 项中的 {{shown}} 项`},dragGhost:{multiCount:`{{count}} 项`,batch:`{{name}}（{{count}} 份）`,batch_plural:`{{name}}（{{count}} 份）`},sections:{currentlyPrinting:`正在打印`,queued:`排队中`,history:`历史`},status:{pending:`等待中`,waiting:`等待中`,printing:`打印中`,paused:`已暂停`,completed:`已完成`,failed:`失败`,skipped:`已跳过`,cancelled:`已取消`},summary:{printing:`打印中`,queued:`排队中`,totalTime:`总队列时间`,totalWeight:`总队列重量`,history:`历史`},filter:{allPrinters:`所有打印机`,unassigned:`未分配`,allStatus:`所有状态`,allLocations:`所有位置`,any:`任意`},sort:{byPosition:`按位置排序`,byName:`按名称排序`,byPrinter:`按打印机排序`,bySchedule:`按排程排序`,byDate:`按日期排序`,ascendingOldest:`升序（最旧优先）`,descendingNewest:`降序（最新优先）`},badges:{staged:`已暂存`,requiresPrevious:`需要前一个成功`,autoPowerOff:`自动关机`,gcodeInjection:`G-code`},empty:{title:`没有排程的打印`,description:`从归档页面使用右键菜单中的"排程"选项来排程打印，或拖放文件开始。`},time:{etaIfStartedNow:`若此任务现在开始的预计完成时间`,whenFree:`有空闲打印机时`,overdue:`已逾期`,now:`现在`,lessThanMinute:`不到一分钟`,inMinutes:`{{count}} 分钟后`,inHours:`{{count}} 小时后`},actions:{startPrint:`开始打印`,stopPrint:`停止打印`,requeue:`重新排队`},bulkEdit:{title:`编辑 {{count}} 个项目`,title_plural:`编辑 {{count}} 个项目`,description:`仅更改的设置将应用于所选项目。`,printer:`打印机`,noChange:`— 不更改 —`,queueOptions:`队列选项`,staged:`暂存（手动开始）`,autoPowerOff:`打印后自动关机`,requirePrevious:`要求前一个成功`,gcodeInjection:`注入G-code`,printOptions:`打印选项`,bedLevelling:`热床调平`,flowCalibration:`流量校准`,vibrationCalibration:`振动校准`,layerInspection:`首层检查`,timelapse:`延时摄影`,useAms:`使用 AMS`,nozzleOffsetCali:`喷嘴偏移校准`,applyChanges:`应用更改`,selectAll:`全选`,deselectAll:`取消全选`,selected:`已选择 {{count}} 个`,editSelected:`编辑所选`,cancelSelected:`取消所选`},confirm:{cancelTitle:`取消排程打印`,cancelMessage:`确定要取消"{{name}}"吗？`,stopTitle:`停止打印`,stopMessage:`确定要停止当前打印"{{name}}"吗？这将取消打印机上的打印任务。`,removeTitle:`从历史中移除`,removeMessage:`确定要从队列历史中移除"{{name}}"吗？`,clearHistoryTitle:`清除历史`,clearHistoryMessage:`确定要从历史中移除所有 {{count}} 个项目吗？`,cancelButton:`取消打印`,stopButton:`停止打印`,thisPrint:`此打印`,thisItem:`此项目`},toast:{cancelled:`队列项目已取消`,cancelFailed:`取消项目失败`,removed:`队列项目已移除`,keptForOrder:`已取消而非移除：这是批量订单可以重新排入该板的唯一一次打印`,historyKeptForOrders:`保留了批量订单仍需要的 {{kept}} 项。`,removeFailed:`移除项目失败`,stopped:`打印已停止`,stopFailed:`停止打印失败`,released:`打印已释放到队列`,startFailed:`开始打印失败`,reorderFailed:`重新排序队列失败`,historyCleared:`已清除 {{count}} 条历史记录`,clearHistoryFailed:`清除历史失败`,updateFailed:`更新项目失败`,bulkCancelled:`已取消 {{count}} 个项目`,bulkCancelFailed:`批量取消项目失败`,batchCreated:`已创建批次"{{name}}"`,batchCreateFailed:`创建批次失败`,batchUngrouped:`已取消分组 {{count}} 项`,batchUngroupFailed:`取消批次分组失败`,resumedAfterFailure:`已恢复队列 — {{restored}} 个任务已恢复为待处理`,resumeAfterFailureFailed:`恢复队列失败`},resumeAfterFailure:{banner:`{{printer}} 因之前的打印失败而被阻塞 — 已跳过 {{count}} 个任务`,bannerHint:`解决打印机问题后恢复队列，以还原跳过的任务并清除阻塞。`,button:`失败后恢复`,confirmTitle:`失败后恢复队列？`,confirmMessage:`将 {{printer}} 上的 {{count}} 个跳过的任务恢复为待处理，并清除上一个打印的阻塞。继续之前请确保打印机已就绪。`},timeline:{listView:`列表`,timelineView:`时间线`,unassigned:`未分配`,noData:`当天没有计划的打印任务`,nothingCommitted:`此时间窗口内没有已确定的计划。暂存项目、等待项目以及空闲打印机上的 ASAP 任务不会显示 — 设置计划时间或释放暂存项目以在此处查看。`,allDoneBy:`所有打印预计在 {{time}} 前完成`,staged:`暂存`,filterAll:`全部显示`,filterPrinting:`打印中`,filterQueued:`排队中`,time:{anyMoment:`即将完成`,minutesLeft:`剩余{{minutes}}分钟`,hoursLeft:`剩余{{hours}}小时`,hoursMinutesLeft:`剩余{{hours}}小时{{minutes}}分钟`},day:{previous:`前一天`,next:`后一天`,today:`今天`},window:{back12h:`后退 12 小时`,forward12h:`前进 12 小时`,now:`现在`},printerColumnHeader:`打印机`},permissions:{noStopPrint:`您没有停止打印的权限`,noStartPrint:`您没有开始打印的权限`,noEdit:`您没有编辑此队列项目的权限`,noCancel:`您没有取消此队列项目的权限`,noRequeue:`您没有重新排队的权限`,noRemove:`您没有移除此队列项目的权限`,noClearHistory:`您没有清除所有历史的权限`,noEditItems:`您没有编辑队列项目的权限`,noCancelItems:`您没有取消队列项目的权限`}},stats:{title:`统计`,subtitle:`拖动小部件以重新排列。点击眼睛图标隐藏。`,overview:`概览`,totalPrints:`总打印次数`,successRate:`成功率`,totalPrintTime:`总打印时间`,printTime:`打印时间`,totalFilament:`总耗材用量`,filamentUsed:`耗材用量`,filamentCost:`耗材成本`,totalCost:`总成本`,energyUsed:`能耗`,energyCost:`能源成本`,energyWarmingUpTooltip:`能耗追踪正在收集每小时快照。当所选范围之前至少存在一个快照时，时间段合计将变得准确。早期数值可能偏低。`,averagePrintTime:`平均打印时间`,printsPerDay:`每日打印次数`,byPrinter:`按打印机`,printsByPrinter:`各打印机打印次数`,byMaterial:`按材料`,byMonth:`按月份`,last7Days:`最近 7 天`,last30Days:`最近 30 天`,last90Days:`最近 90 天`,allTime:`全部时间`,quickStats:`快速统计`,printActivity:`打印活动`,filamentTypes:`耗材类型`,filamentTrends:`耗材趋势`,failureAnalysis:`失败分析`,timeAccuracy:`时间准确度`,successful:`成功：`,failed:`失败：`,cancelled:`已取消：`,perfectEstimate:`100% = 完美估计`,noTimeAccuracyData:`暂无时间准确度数据`,noFilamentData:`暂无耗材数据`,noPrinterData:`暂无打印机数据`,noPrintData:`暂无打印数据`,noPrintDataLast30Days:`最近 30 天无打印数据`,failureReasons:`失败原因`,topFailureReasons:`主要失败原因`,failedPrintsCount:`{{failed}} / {{total}} 次打印失败`,lastWeekRate:`上周：{{rate}}%`,resetLayout:`重置布局`,recalculateCosts:`重新计算成本`,recalculateCostsHint:`使用当前耗材价格重新计算所有归档成本`,exportStats:`导出统计`,exportAsCsv:`导出为 CSV`,exportAsExcel:`导出为 Excel`,hiddenCount:`{{count}} 个已隐藏`,exportDownloaded:`导出已下载`,exportFailed:`导出失败`,layoutReset:`布局已重置`,recalculatedCosts:`已为 {{count}} 个归档重新计算成本`,recalculateFailed:`重新计算成本失败`,loadingStats:`加载统计数据中...`,noPermissionResetLayout:`您没有重置布局的权限`,noPermissionRecalculate:`您没有重新计算成本的权限`,noPrintDataInRange:`所选范围内无打印数据`,periodFilament:`期间耗材`,periodCost:`期间成本`,avgPerPrint:`每次打印平均`,usageOverTime:`随时间的使用量`,energyOverTime:`随时间的能耗`,filamentByWeight:`重量`,printDuration:`打印时长`,printerUtilization:`打印机利用率`,filamentSuccess:`按材料成功率`,printHabits:`打印习惯`,printTimeOfDay:`打印时段`,colorDistribution:`颜色分布`,noColorData:`暂无颜色数据`,records:`记录`,longestPrint:`最长打印`,heaviestPrint:`最重打印`,mostExpensivePrint:`最贵打印`,busiestDay:`最忙碌的一天`,successStreak:`连续成功`,streakPrint:`连续打印`,streakPrints:`{{count}} 次连续打印`,printerStats:`打印机统计`,hours:`小时`,avgPrints:`平均打印`,noArchiveData:`暂无打印数据`,filamentByTime:`时间`,avgWeight:`平均重量`,avgTime:`平均时间`,filamentByPrints:`打印次数`,timeframe:{today:`今天`,"this-week":`本周`,"this-month":`本月`,"last-7":`最近 7 天`,"last-30":`最近 30 天`,"last-90":`最近 90 天`,"this-year":`今年`,"all-time":`全部时间`,custom:`自定义范围`,from:`从`,to:`到`},allUsers:`所有用户`,noUser:`无用户（系统）`,filterByUser:`按用户筛选`},maintenance:{title:`维护`,overview:`概览`,allOk:`所有维护均已完成`,dueCount:`{{count}} 项到期`,dueCount_plural:`{{count}} 项到期`,warningCount:`{{count}} 个警告`,warningCount_plural:`{{count}} 个警告`,totalPrintTime:`总打印时间`,nextMaintenance:`下次维护`,nothingDue:`无到期项目`,tasks:`任务`,lastPerformed:`上次执行`,interval:`间隔`,hoursRemaining:`剩余 {{hours}} 小时`,hoursOverdue:`逾期 {{hours}} 小时`,markDone:`标记为完成`,performMaintenance:`执行维护`,history:`历史`,noHistory:`无维护历史`,editPrintHours:`编辑打印时间`,currentHours:`当前小时数`,statusTab:`状态`,settingsTab:`设置`,overdueCount:`{{count}} 个逾期`,dueSoonCount:`{{count}} 个即将到期`,dueSoon:`即将到期`,allGood:`一切正常`,overdueBy:`逾期 {{duration}}`,dueIn:`{{duration}} 后到期`,timeLeft:`剩余 {{duration}}`,day:`1 天`,days:`{{count}} 天`,week:`1 周`,weeks:`{{count}} 周`,month:`1 个月`,months:`{{count}} 个月`,year:`1 年`,maintenanceTypes:`维护类型`,maintenanceTypesDescription:`系统类型和您的自定义维护任务`,addCustomType:`添加自定义类型`,restoreDefaults:`恢复默认任务`,intervalType:`间隔类型`,intervalValue:`间隔 ({{type}})`,icon:`图标`,documentationLink:`文档链接（可选）`,assignToPrinters:`分配给打印机`,selectAtLeastOnePrinter:`至少选择一台打印机`,addType:`添加类型`,custom:`自定义`,printHours:`打印小时数`,calendarDays:`日历天数`,exampleName:`例如：更换 HEPA 过滤器`,viewDocumentation:`查看文档`,timeBasedInterval:`基于时间的间隔`,intervalOverrides:`间隔覆盖`,intervalOverridesDescription:`为特定打印机自定义间隔`,assignedToPrinters:`已分配给打印机：`,noPrintersAssigned:`未分配打印机`,addPrinterShort:`添加：`,printersAssignedClick:`已分配 {{count}} 台打印机 - 点击管理`,removeFromPrinter:`从此打印机移除`,types:{lubricateCarbonRods:`润滑碳纤维杆`,lubricateRails:`润滑线性导轨`,cleanNozzle:`清洁喷嘴/热端`,checkBelts:`检查皮带张力`,cleanBuildPlate:`清洁构建板`,checkExtruder:`检查挤出机齿轮`,checkCooling:`检查冷却风扇`,generalInspection:`综合检查`,cleanCarbonRods:`清洁碳纤维杆`,lubricateSteelRods:`润滑钢杆`,cleanSteelRods:`清洁钢杆`,cleanLinearRails:`清洁线性导轨`,checkPtfeTube:`检查 PTFE 管`,replaceHepaFilter:`更换 HEPA 过滤器`,replaceCarbonFilter:`更换活性炭过滤器`,lubricateLeftNozzleRail:`润滑左喷嘴导轨`},maintenanceComplete:`维护已标记为完成`,typeUpdated:`维护类型已更新`,typeDeleted:`维护类型已删除`,defaultsRestored:`已恢复 {{count}} 个默认任务`,printHoursUpdated:`打印小时数已更新`,printerAssigned:`打印机已分配`,printerRemoved:`打印机已移除`,deleteTypeConfirm:`删除"{{name}}"？`,deleteSystemTypeTitle:`删除默认维护任务？`,deleteSystemTypeMessage:`确定要删除默认维护任务"{{name}}"吗？`,noPermissionUpdate:`您没有更新维护项目的权限`,noPermissionPerform:`您没有执行维护的权限`,noPermissionEditTypes:`您没有编辑维护类型的权限`,noPermissionDeleteTypes:`您没有删除维护类型的权限`,noPermissionEditHours:`您没有编辑打印时间的权限`,noPermissionRemovePrinter:`您没有移除打印机分配的权限`,noPermissionAssignPrinter:`您没有分配打印机的权限`,noPermissionEditIntervals:`您没有编辑间隔的权限`,configureSettings:`配置维护类型和间隔`},settings:{sliceEngine:`切片引擎`,sliceEngineSidecar:`服务器 sidecar`,sliceEngineSidecarHint:`切片在服务器上的切片 sidecar 容器中运行。`,sliceEngineBrowser:`在浏览器中`,sliceEngineBrowserHint:`切片在本设备上运行，不经过服务器。`,title:`设置`,general:`通用`,tabs:{general:`通用`,smartPlugs:`智能插座`,sensors:`传感器`,notifications:`通知`,queue:`工作流`,queueDispatch:`队列与调度`,queuePipelines:`流水线`,filament:`耗材`,network:`网络`,apiKeys:`API 密钥`,virtualPrinter:`虚拟打印机`,spoolbuddy:`SpoolBuddy`,failureDetection:`故障检测`,users:`身份验证`,backup:`备份`,emailAuth:`邮箱认证`,ldap:`LDAP`,twoFa:`双因素认证`,oidc:`SSO / OIDC`,security:`安全`},spoolbuddy:{infoTitle:`SpoolBuddy 设备`,infoBody:`SpoolBuddy kiosk 通过心跳自动注册。如果设备不再使用，或守护进程崩溃遗留了陈旧的重复项，可在此注销。`,duplicatesTitle:`已注册 {{count}} 台设备`,duplicatesBody:`kiosk 界面只使用最先注册的设备。如果其中有因崩溃遗留的陈旧重复项，请注销它——在线设备会在下次心跳时重新注册自己。`,empty:`尚未注册任何 SpoolBuddy 设备。`,online:`在线`,offline:`离线`,unregister:`注销`,unregisterSuccess:`设备已注销`,unregisterError:`注销设备失败`,confirmTitle:`注销 SpoolBuddy 设备？`,confirmBody:`将从数据库中移除 "{{hostname}}" ({{deviceId}})。如果设备在线，会在下次心跳时重新注册自己。`,ipAddress:`IP 地址`,firmware:`固件`,lastSeen:`上次在线`,daemonUptime:`守护进程运行时间`,systemUptime:`系统运行时间`,never:`从未`,nfc:`NFC`,scale:`秤`,cpuTemp:`CPU 温度`,cpuLoad:`CPU 负载`,memory:`内存`,disk:`磁盘`,update:`更新`,updateConfirmTitle:`更新 SpoolBuddy 守护进程？`,updateConfirmBody:`对 "{{hostname}}" 触发软件更新？更新完成后守护进程将重启。`,restartBrowser:`重启浏览器`,restartBrowserConfirmTitle:`重启 kiosk 浏览器？`,restartBrowserConfirmBody:`在 "{{hostname}}" 上重启 kiosk 浏览器？显示将短暂黑屏。`,restartDaemon:`重启守护进程`,restartDaemonConfirmTitle:`重启 SpoolBuddy 守护进程？`,restartDaemonConfirmBody:`在 "{{hostname}}" 上重启 SpoolBuddy 守护进程？设备将离线几秒钟。`,reboot:`重启`,rebootConfirmTitle:`重启设备？`,rebootConfirmBody:`重启 "{{hostname}}"？设备将离线约一分钟。`,shutdown:`关机`,shutdownConfirmTitle:`关闭设备？`,shutdownConfirmBody:`关闭 "{{hostname}}"？您需要物理访问才能重新开机。`,commandConfirm:`确认`,commandQueued:`命令已加入队列`,commandError:`发送命令失败`},ldap:{title:`LDAP 认证`,enabledDesc:`LDAP 认证已启用`,disabledDesc:`LDAP 认证已禁用`,disabledHint:`在下方配置并保存 LDAP 设置，然后启用。`,enabled:`LDAP 认证已启用`,disabled:`LDAP 认证已禁用`,feature1:`用户可以使用 LDAP 凭据登录`,feature2:`本地管理员帐户作为后备保留`,feature3:`登录时 LDAP 组映射到 BamBuddy 组`,serverConfig:`LDAP 服务器配置`,serverUrl:`服务器 URL`,serverUrlHint:`使用 ldap:// 进行标准连接或 ldaps:// 进行 SSL 连接`,security:`安全`,securityHint:`StartTLS 将普通连接升级为 TLS。LDAPS 从一开始就使用 TLS。`,bindDn:`绑定 DN（服务帐户）`,bindPassword:`绑定密码`,searchBase:`搜索基础 DN`,userFilter:`用户搜索过滤器`,userFilterHint:`{username} 替换为登录用户名。OpenLDAP 使用 (uid={username})。`,advanced:`高级`,autoProvision:`自动创建用户`,autoProvisionHint:`首次 LDAP 登录时自动创建 BamBuddy 帐户`,defaultGroup:`默认组`,defaultGroupNone:`— 无（无回退）—`,defaultGroupHint:`当 LDAP 用户通过身份验证但不在任何已映射的 LDAP 组中时分配的回退组。留空以使未映射的用户没有权限。`,groupMapping:`组映射（JSON）`,groupMappingHint:`将 LDAP 组 DN 映射到 BamBuddy 组。可用组：`,testConnection:`测试连接`,settingsSaved:`LDAP 设置已保存`,errors:{serverRequired:`LDAP 服务器 URL 为必填项`,searchBaseRequired:`搜索基础 DN 为必填项`,enableAuthFirst:`请先启用认证`,configureLdapFirst:`请先保存 LDAP 设置`}},email:{smtpSettings:`SMTP 配置`,smtpHost:`SMTP 服务器`,smtpPort:`SMTP 端口`,security:`安全`,authentication:`认证`,username:`用户名`,password:`密码`,fromEmail:`发件邮箱`,fromName:`发件人名称`,testConnection:`测试 SMTP 连接`,testRecipient:`测试收件邮箱`,sendTest:`发送测试邮件`,sending:`发送中...`,save:`保存设置`,saving:`保存中...`,advancedAuth:`高级认证`,advancedAuthEnabled:`高级认证已启用`,advancedAuthEnabledDesc:`基于邮箱的用户管理功能已激活。新用户将通过邮件收到自动生成的密码，用户可以通过忘记密码功能重置密码。`,advancedAuthDisabled:`高级认证已禁用`,advancedAuthDisabledDesc:`启用高级认证以激活基于邮箱的用户管理功能。`,enable:`启用`,disable:`禁用`,feature1:`密码自动生成并通过邮件发送给新用户`,feature2:`用户可以使用用户名或邮箱登录`,feature3:`忘记密码功能可用`,feature4:`管理员可以通过邮件重置用户密码`,errors:{requiredFields:`请填写所有必填字段`,usernameRequired:`启用认证时需要用户名`,enterTestEmail:`请输入测试邮箱地址`,smtpServerAndEmail:`测试前请填写 SMTP 服务器和发件邮箱`,usernamePasswordRequired:`启用认证时需要用户名和密码`,configureSmtpFirst:`请先配置并测试 SMTP 设置`,enableAuthFirst:`请先启用身份验证才能使用基于电子邮件的功能。`},success:{settingsSaved:`SMTP 设置保存成功`},securityOptions:{starttls:`STARTTLS（端口 587）`,ssl:`SSL/TLS（端口 465）`,none:`无（端口 25）`},authOptions:{enabled:`已启用`,disabled:`已禁用`}},appearance:`外观`,notifications:`通知`,smartPlugs:`智能插座`,spoolman:`Spoolman`,updates:`更新`,language:`语言`,languageDescription:`选择您的首选语言`,theme:`主题`,themeLight:`浅色`,themeDark:`深色`,themeSystem:`跟随系统`,defaultView:`默认视图`,defaultViewDescription:`打开应用时显示的页面`,checkForUpdates:`检查更新`,autoUpdate:`自动更新`,currentVersion:`当前版本`,latestVersion:`最新版本`,upToDate:`已是最新版本`,updateAvailable:`有可用更新`,notificationLanguage:`通知语言`,notificationLanguageDescription:`推送通知的语言`,bedCooledThreshold:`热床冷却阈值`,bedCooledThresholdDescription:`打印后热床被视为已冷却的温度`,userNotificationsEnabled:`用户通知`,userNotificationsEnabledDescription:`启用用户通知菜单和打印任务事件的邮件通知。需要高级身份验证。`,userNotificationsDisabledHint:`请启用高级身份验证以使用用户通知。`,notificationProviders:`通知提供商`,addProvider:`添加提供商`,editProvider:`编辑提供商`,providerType:`提供商类型`,testNotification:`测试通知`,testSuccess:`测试通知发送成功`,testFailed:`发送测试通知失败`,quietHours:`免打扰时间`,quietHoursDescription:`在此时间段内不发送通知`,quietHoursStart:`开始`,quietHoursEnd:`结束`,events:{title:`通知事件`,printStart:`打印开始`,printComplete:`打印完成`,printFailed:`打印失败`,printStopped:`打印停止`,printProgress:`进度里程碑`,printProgressDescription:`在 25%、50%、75% 时通知`,printerOffline:`打印机离线`,printerError:`打印机错误`,filamentLow:`耗材不足`,maintenanceDue:`维护到期`,maintenanceDueDescription:`需要维护时通知`},smartPlug:{title:`智能插座`,add:`添加智能插座`,edit:`编辑智能插座`,name:`名称`,ipAddress:`IP 地址`,linkedPrinter:`关联打印机`,autoOn:`自动开启`,autoOnDescription:`打印开始时开启`,autoOff:`自动关闭`,autoOffDescription:`打印完成后关闭`,offDelay:`关闭延迟`,offDelayMinutes:`打印后分钟数`,offDelayTemp:`当喷嘴温度低于`,currentState:`当前状态`,turnOn:`开启`,turnOff:`关闭`},filamentTracking:`耗材追踪`,filamentTrackingDesc:`选择如何追踪您的耗材。您可以使用内置库存或连接外部 Spoolman 服务器。`,autoAddUnknownRfid:`自动添加未知 RFID 料盘`,autoAddUnknownRfidDesc:`检测到带有未知 RFID 标签的料盘时，自动创建库存条目。如果您手动预先注册新料盘以避免重复，请关闭此项。`,filamentChecks:`耗材检查`,disableFilamentWarnings:`禁用耗材警告`,disableFilamentWarningsDesc:`在打印或加入队列时不显示耗材不足警告`,preferLowestFilament:`优先使用剩余最少的耗材`,preferLowestFilamentDesc:`当多个料盘匹配时，使用剩余耗材最少的那个`,preferLowestFilamentBackupNote:`仅当打印机端启用了 AMS 备用料盘时才生效——否则当选中的料盘耗尽时，打印机无法切换到备用料盘。`,trackingModeBuiltIn:`内置库存`,trackingModeBuiltInDesc:`包含 RFID 自动匹配和用量追踪`,trackingModeSpoolmanDesc:`外部耗材管理服务器`,builtInFeatureRfid:`自动检测 AMS 中的拓竹 RFID 耗材`,builtInFeatureUsage:`追踪每次打印的耗材消耗`,builtInFeatureCatalog:`管理耗材、颜色和 K 值配置文件`,builtInFeatureThirdParty:`第三方耗材可分配到库存耗材`,amsSyncButton:`从 AMS 同步重量`,amsSyncTitle:`从 AMS 同步耗材重量`,amsSyncMessage:`这将使用已连接打印机的当前 AMS 剩余百分比值覆盖所有库存耗材重量。用于从损坏的重量数据中恢复。打印机必须在线。`,amsSyncing:`同步中...`,amsSyncSuccess:`已同步 {{synced}} 个耗材，跳过 {{skipped}} 个`,amsSyncError:`从 AMS 同步重量失败`,spoolmanAmsSyncButton:`从 AMS 同步 Spoolman 重量`,spoolmanAmsSyncTitle:`从 AMS 同步 Spoolman 耗材重量`,spoolmanAmsSyncMessage:`这将根据已连接打印机的当前 AMS 剩余百分比值更新所有 Spoolman 耗材重量。打印机必须在线。`,spoolmanAmsSyncing:`同步中...`,spoolmanAmsSyncSuccess:`已同步 {{synced}} 个 Spoolman 耗材，跳过 {{skipped}} 个`,spoolmanAmsSyncError:`从 AMS 同步 Spoolman 重量失败`,spoolmanAmsSyncErrorUnreachable:`同步失败（Spoolman 不可访问）`,spoolmanAmsSyncErrorNotConfigured:`同步失败（Spoolman 未配置）`,spoolmanNotConfigured:`Spoolman 未配置`,spoolmanFilamentCatalogTitle:`Spoolman 耗材目录`,spoolmanFilamentCatalogDesc:`来自 Spoolman 的耗材名称和皮重。名称和线轴重量可在此处编辑；其他属性请直接在 Spoolman 中管理。`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`Spoolman 服务器的 URL（例如 http://localhost:7912）`,spoolmanConnected:`已连接`,spoolmanDisconnected:`未连接`,status:`状态`,connect:`连接`,disconnect:`断开`,howSyncWorks:`同步工作原理`,syncInfoRfidOnly:`仅同步带有 RFID 的官方拓竹耗材`,syncInfoAutoCreate:`首次同步时自动在 Spoolman 中创建新耗材`,syncInfoThirdPartySkipped:`非拓竹耗材（第三方、重新填充的）将被跳过`,linkingExistingSpools:`链接现有耗材`,linkingExistingSpoolsDesc:`要将现有的 Spoolman 耗材链接到您的 AMS，请将鼠标悬停在 AMS 槽位上并点击"链接到 Spoolman"。`,syncMode:`同步模式`,syncModeAuto:`自动`,syncModeManual:`仅手动`,syncModeAutoDesc:`检测到更改时自动同步 AMS 数据`,syncModeManualDesc:`仅在手动触发时同步`,syncAmsData:`同步 AMS 数据`,syncAmsDataDesc:`手动将打印机 AMS 数据同步到 Spoolman`,allPrinters:`所有打印机`,noDefaultPrinter:`无默认（每次询问）`,sidebarOrder:`侧边栏顺序`,saveThumbnails:`保存缩略图`,captureFinishPhoto:`拍摄完成照片`,noPrintersConfigured:`未配置打印机`,archiveMode:{always:`始终创建归档条目`,never:`从不创建归档条目`,ask:`每次询问`},checkForUpdatesLabel:`检查更新`,checkPrinterFirmware:`检查打印机固件`,includeBetaUpdates:`包含测试版本`,includeBetaUpdatesDesc:`检查更新时通知测试版和预发布版本`,localLogin:{disable:`禁用本地用户名／密码登录`,disableHint:`启用后，只能通过SSO提供商登录。LDAP不受影响。在服务器上设置 BAMBUDDY_LOCAL_LOGIN=true 可保留恢复通道。`},enableRetry:`启用重试`,homeAssistantDescription:`通过 Home Assistant 控制智能插座`,environmentManagedLabel:`（环境变量管理）`,autoEnabledViaEnv:`通过环境变量自动启用`,urlFromEnvReadOnly:`值由 HA_URL 环境变量设置（只读）`,tokenFromEnvReadOnly:`值由 HA_TOKEN 环境变量设置（只读）`,mqttConnectedTo:`已连接到`,prometheusDescription:`以 Prometheus 格式暴露打印机数据`,noSmartPlugsTitle:`未配置智能插座`,noSmartPlugsDescription:`添加基于 Tasmota 的智能插座以追踪能耗并自动化电源控制。`,noProvidersTitle:`未配置提供商`,noProvidersDescription:`添加提供商以接收警报。`,noTemplatesAvailable:`无可用模板。重启后端以加载默认模板。`,apiPermissionView:`查看打印机状态和队列`,apiPermissionEdit:`添加和移除打印队列中的项目`,apiKeysEmptyTitle:`无 API 密钥`,apiKeysEmptyDescription:`创建 API 密钥以与外部服务集成。`,noUsersFound:`未找到用户`,noGroupsFound:`未找到组`,noGroupsAvailable:`无可用组`,passwordsDoNotMatch:`密码不匹配`,systemGroupWarning:`系统组名称不可更改`,authDisabledTitle:`身份验证已禁用`,authDisabledFeature1:`需要登录才能访问系统`,authDisabledFeature2:`创建多个用户并基于组的权限管理`,authDisabledFeature3:`使用 50+ 个细粒度权限控制访问`,userHasCreated:`此用户已创建：`,userItemsQuestion:`您想如何处理这些项目？`,deleteUserConfirm:`确定要删除此用户吗？`,actionCannotBeUndone:`此操作无法撤销。`,addFirstSmartPlug:`添加您的第一个智能插座`,providers:`提供商`,log:`日志`,testAll:`全部测试`,testResults:`测试结果`,testPassedCount:`{{count}} 个通过`,testFailedCount:`{{count}} 个失败`,messageTemplates:`消息模板`,messageTemplatesDescription:`自定义每个事件的通知消息。`,apiKeys:`API 密钥`,apiKeysDescription:`创建 API 密钥用于外部集成和 Webhook。`,createKey:`创建密钥`,apiKeyCreated:`API 密钥创建成功`,apiKeyCopyWarning:`请立即复制此密钥 - 它不会再次显示！`,useInApiBrowser:`在 API 浏览器中使用`,apiKeyQrButton:`二维码`,apiKeyQrTitle:`扫码配置`,apiKeyQrCaption:`使用手机应用扫描以添加此服务器和 API 密钥。`,apiKeyQrWarning:`包含您的机密 API 密钥——请勿在他人可见的地方分享或截图。`,createNewApiKey:`创建新 API 密钥`,keyName:`密钥名称`,keyNamePlaceholder:`例如：Home Assistant、OctoPrint`,readStatus:`读取状态`,readStatusDescription:`查看打印机状态、队列、资料库、存档和切片机流水线`,manageQueue:`管理队列`,manageQueueDescription:`添加和移除打印队列中的项目。与“管理资料库”配合可运行切片机流水线`,controlPrinter:`控制打印机`,controlPrinterDescription:`暂停、继续和停止打印`,manageLibrary:`管理资料库`,manageLibraryDescription:`上传、重命名、删除和切片资料库文件；从 MakerWorld 导入模型。与“管理队列”配合可运行切片机流水线`,manageInventory:`管理库存`,manageInventoryDescription:`创建、更新和删除耗材盘以及库存记录。SpoolBuddy 终端（NFC 扫描、秤读取、终端系统命令）需要此权限。`,manageMaintenance:`管理维护`,manageMaintenanceDescription:`记录已完成的维护、重置计数器、编辑间隔并管理维护类型目录。适用于在不授予更广泛打印机控制权限的情况下记录"我清洁了喷嘴"的 Home Assistant 自动化。`,manageArchives:`管理打印存档`,manageArchivesDescription:`编辑和删除打印存档，包括移除旧的打印及其统计数据贡献。适用于精简打印历史的自动化。`,manageProjects:`管理项目`,manageProjectsDescription:`创建、更新和删除项目，并向其添加存档。适用于将打印整理到项目中的自动化。`,maintenanceBadge:`维护`,archivesBadge:`存档`,projectsBadge:`项目`,libraryBadge:`资料库`,inventoryBadge:`库存`,cloudAccess:`允许云端访问`,cloudAccessDescription:`代表您读取 Bambu Cloud 预设和耗材。需要登录 Bambu Cloud。`,cloudBadge:`云端`,updateEnergyCost:`更新电价`,updateEnergyCostDescription:`允许此密钥向 /settings/electricity-price POST 新的每千瓦时电价。适用于 Home Assistant 动态电价自动化（Tibber、Octopus 等）。这是唯一可通过 API 密钥写入的设置字段。`,energyCostBadge:`能耗`,legacyKey:`传统`,legacyKeyTooltip:`在按用户所有权之前创建；需重建以使用云端访问`,unnamedKey:`未命名密钥`,lastUsed:`上次使用`,read:`读取`,control:`控制`,createFirstKey:`创建您的第一个密钥`,webhookEndpoints:`Webhook 端点`,webhookApiKeyHint:`在 X-API-Key 请求头中使用您的 API 密钥。`,webhook:{getAllStatus:`获取所有打印机状态`,getSpecificStatus:`获取特定打印机状态`,addToQueue:`添加到打印队列`,pausePrint:`暂停打印`,resumePrint:`继续打印`,stopPrint:`停止打印`},apiBrowser:`API 浏览器`,apiBrowserDescription:`浏览和测试所有可用的 API 端点。`,apiKeyForTesting:`测试用 API 密钥`,apiKeyPlaceholder:`在此粘贴您的 API 密钥以测试需要认证的端点...`,apiKeyHint:`此密钥将作为 X-API-Key 请求头随请求发送。`,deleteApiKeyTitle:`删除 API 密钥`,deleteApiKeyMessage:`确定要删除此 API 密钥吗？使用此密钥的所有集成将停止工作。`,deleteKey:`删除密钥`,amsDisplayThresholds:`AMS 显示阈值`,amsThresholdsDescription:`配置 AMS 湿度和温度指示器的颜色阈值。`,humidity:`湿度`,goodGreen:`良好（绿色）`,fairOrange:`一般（橙色）`,aboveFairBad:`超过一般阈值显示为红色（差）`,fairAlsoDryingThreshold:`此阈值也用于触发自动干燥`,fairBelowDryingFloor:`自动干燥无法达到该值：AMS 在加热时读数为 {{floor}}% 或更高，因此每个周期都会结束并立即重新开始。若使用自动干燥，请将其设为高于 {{floor}}%。`,temperature:`温度`,goodBlue:`良好（蓝色）`,aboveFairHot:`超过一般阈值显示为红色（热）`,tempAlarmThreshold:`告警阈值`,tempAlarmSeparateFromBand:`只有告警阈值会发送通知，良好和一般仅用于显示配色。留空则与此前一致，在一般阈值触发告警。`,tempAlarmMustBePositive:`小于或等于 0 的阈值将被忽略，告警改用一般阈值。`,historyRetention:`历史保留`,keepSensorHistory:`保留传感器历史`,historyRetentionDescription:`较旧的湿度和温度数据将被自动删除`,defaultPrintOptions:`默认打印选项`,defaultPrintOptionsDescription:`设置新打印的默认选项值。可在打印对话框中逐次覆盖。`,defaultBedLevelling:`热床调平`,defaultBedLevellingDesc:`打印前自动调平热床`,defaultFlowCali:`流量校准`,defaultFlowCaliDesc:`校准挤出流量`,defaultVibrationCali:`振动校准`,defaultVibrationCaliDesc:`减少振纹伪影`,defaultLayerInspect:`首层检测`,defaultLayerInspectDesc:`AI首层检测`,defaultTimelapse:`延时摄影`,defaultTimelapseDesc:`录制延时摄影视频`,defaultNozzleOffsetCali:`喷嘴偏移校准`,defaultNozzleOffsetCaliDesc:`校准两个挤出机之间的喷嘴偏移`,tempFanPresetsTitle:`温度与风扇预设`,tempFanPresetsDescription:`自定义打印机卡片温度和风扇速度弹出框中显示的快速选择值。"关闭"按钮始终显示。`,tempFanPresetsNozzle:`喷嘴温度`,tempFanPresetsBed:`热床温度`,tempFanPresetsChamber:`腔室温度`,tempFanPresetsFan:`风扇速度`,tempFanPresetsReset:`恢复默认值`,concurrentUploadsTitle:`并发上传`,concurrentUploadsDescription:`队列可以同时向多少台打印机发送文件。打印机接收文件很慢（大型打印可能需要几分钟），并且每台都要排队等候——因此在打印机较多时，调高该值可以避免批次中最后一台打印机等完前面所有传输。如果网络或 Bambuddy 主机难以承受并行传输，请调低该值。`,concurrentUploadsLabel:`同时上传的打印机数量`,concurrentUploadsHelp:`设为 1 时一次只向一台打印机发送（旧行为）。默认值为 4。`,staggeredStart:`错峰启动`,staggeredStartDescription:`错峰启动多台打印机批次时的默认组大小和间隔。可在打印对话框中按批次覆盖。`,preheatTitle:`预热与热保温`,preheatDescription:`在每个排队打印开始前预热热床（以及支持的话腔体）并保持温度。对于没有腔体主动加热的打印机使用工程材料（PA、ABS）很有帮助 — 保温计时进行时，热床通过辐射温暖腔体。热床目标温度从打印文件读取；腔体行为取决于打印机型号。`,preheatEnabled:`启用预热与保温`,preheatEnabledDesc:`关闭时，排队打印立即开始。每个队列项可按单次打印覆盖。`,preheatFilamentTargetsLabel:`按耗材的腔体目标 (°C)`,preheatFilamentTargetsHint:`Bambuddy 会在已装入的 AMS 槽位中选择最高目标；所有槽位都推导为 0 的打印（PLA、PETG、TPU、PVA）将完全跳过预热并立即开始。`,preheatFilamentTargetsReset:`重置为默认值`,preheatFilamentTargetsDefaultRow:`其他 / 未映射`,preheatMaxWait:`最长等待（秒）`,preheatMaxWaitHelp:`进入保温阶段前的腔体预热阶段上限。`,preheatSoak:`保温（秒）`,preheatSoakHelp:`达到目标或最长等待结束后的保持时间。`,preheatHardwareTitle:`按打印机的行为：`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E 通过 M141 主动加热腔体。X1C/P2S 读取腔体温度但仅靠热床辐射加热。P1S/P1P/A1/A1 Mini 无腔体传感器 — 仅保温计时器生效。`,preheatPerItemDesc:`在本次打印开始前预热热床和腔体。默认使用设置 → 工作流的全局开关。`,preheatOverride_inherit:`继承`,preheatOverride_on:`开启`,preheatOverride_off:`关闭`,calibrationMode_off:`关闭`,calibrationMode_on:`开启`,calibrationMode_auto:`自动`,preheatTargetOverride:`覆盖腔体目标 (°C，留空使用耗材默认)`,preheatTargetOverrideHelp:`0 表示只加热热床并执行保温，不加热腔体。留空时，不需要腔体加热的打印会完全跳过预热。`,plateClear:`热床清空确认`,requirePlateClear:`需要热床清空确认`,requirePlateClearDescription:`启用后，调度器会在已完成打印的打印机上启动排队打印之前，等待每台打印机的热床清空确认。禁用后，也会隐藏打印机卡片上的打印板状态标记和“将打印板标记为已清理”按钮。`,keepBedWarm:`在打印之间保持热床温度`,keepBedWarmDesc:`在等待打印板清空确认时，将热床保持在下方设置的保温温度，使腔室保持温热；若下一个任务的热床温度更高，则使用该温度。仅在下一次打印需要腔室加热（ASA、ABS、PA、PC 等）时适用。需要启用打印板清空确认。`,keepWarmBedTemp:`保温热床温度 (°C)`,keepWarmBedTempHelp:`当热床用于加热腔室时使用：包括保温期间，以及打印文件未包含热床温度时的预热。打印文件中更高的热床温度始终优先。`,keepWarmMaxMinutes:`停止保温的时间（分钟）`,keepWarmMaxMinutesHelp:`若在此时间内未清空打印板，加热器将关闭，而不是无限期保持加热。`,gcodeInjection:`G-code注入`,gcodeInjectionDescription:`为Farmloop、SwapMod、AutoClear和Printflow 3D等自动打印系统配置自定义G-code，在打印开始和/或结束时注入。代码片段按打印机型号配置，在队列项目上启用"注入G-code"时应用。`,gcodeInjectionNoPrinters:`未找到打印机。添加打印机以配置G-code代码片段。`,gcodeStartLabel:`开始G-code`,gcodeEndLabel:`结束G-code`,gcodeStartPlaceholder:`在打印开始前插入的G-code...`,gcodeEndPlaceholder:`在打印结束后追加的G-code...`,staggerGroupSize:`组大小`,staggerGroupSizeHelp:`每组同时启动的打印机数量`,staggerInterval:`间隔（分钟）`,staggerIntervalHelp:`每组启动之间的延迟`,queueDrying:`自动干燥`,queueDryingDescription:`在队列打印之间，打印机空闲时自动干燥AMS耗材。使用上方的湿度阈值触发干燥。`,queueDryingEnabled:`启用自动干燥`,queueDryingEnabledDescription:`当打印机空闲且湿度超过阈值时，自动启动AMS干燥`,queueDryingBlock:`等待干燥完成`,queueDryingBlockDescription:`阻止打印队列直到干燥完成。关闭时，打印优先于干燥。`,ambientDryingEnabled:`环境干燥`,ambientDryingEnabledDescription:`当空闲打印机的湿度超过阈值时自动干燥耗材，无需排队打印。`,printDryingEnabled:`打印时继续干燥`,printDryingEnabledDescription:`允许自动干燥在支持的硬件（H2D、H2C、H2S、P2S、H2D Pro、X2D、X1C、A2L 最新固件）打印过程中继续运行。为保护料盘，干燥温度会自动比空闲时预设低 5°C。`,dryingPresets:`干燥预设`,dryingPresetsDescription:`每种耗材类型的温度和时长。AMS 2 Pro使用较低温度，AMS-HT支持较高温度。`,dryingFilament:`耗材`,humidityThresholds:`湿度阈值`,humidityThresholdsDescription:`按耗材类型设置自动干燥和报警的湿度触发值。同一 AMS 混装时使用最低阈值。`,humidityThresholdCol:`阈值`,humidityThresholdDefault:`默认（未知类型）`,printModal:`打印对话框`,expandCustomMapping:`默认展开自定义映射`,expandCustomMappingDescription:`打印到多台打印机时，默认展开显示每台打印机的 AMS 映射`,authentication:`身份验证`,authEnabledDescription:`您的实例已通过用户身份验证保护`,authDisabledDescription:`启用以要求登录并管理用户访问`,authDisabledMessage:`启用身份验证以创建用户账户、管理权限并保护您的 Bambuddy 实例。`,enableAuthentication:`启用身份验证`,currentUser:`当前用户`,changePassword:`修改密码`,admin:`管理员`,users:`用户`,addUser:`添加用户`,groups:`组`,addGroup:`添加组`,system:`系统`,noDescription:`无描述`,userCount:`{{count}} 个用户`,permissionCount:`{{count}} 个权限`,createUser:`创建用户`,username:`用户名`,enterUsername:`输入用户名`,password:`密码`,enterPassword:`输入密码`,passwordRequirements:`至少 8 个字符，包含一个大写、一个小写、一个数字和一个特殊字符。`,confirmPassword:`确认密码`,confirmPasswordPlaceholder:`确认密码`,viewReleaseOnGitHub:`在 GitHub 上查看发布`,turnAllPlugsOn:`开启所有插座`,turnAllPlugsOff:`关闭所有插座`,clearNotificationLogs:`清除通知日志`,clearLogsMessage:`这将永久删除所有 30 天前的通知日志。此操作无法撤销。`,clearLogs:`清除日志`,resetUiPreferences:`重置 UI 偏好`,resetUiPreferencesMessage:`这将重置所有 UI 偏好为默认值：侧边栏顺序、主题、仪表板布局、视图模式和排序偏好。您的打印机、归档和服务器设置不会受到影响。清除后页面将重新加载。`,resetPreferences:`重置偏好`,deleteGroupTitle:`删除组`,deleteGroupMessage:`确定要删除此组吗？此组中的用户将失去这些权限。`,deleteGroup:`删除组`,disableAuthenticationTitle:`禁用身份验证`,disableAuthenticationMessage:`确定要禁用身份验证吗？这将使您的 Bambuddy 实例无需登录即可访问。所有用户将保留在数据库中但身份验证将被禁用。`,disableAuthentication:`禁用身份验证`,configureBambuddy:`配置 Bambuddy`,systemDefault:`系统默认`,archiveSettings:`归档设置`,newWindow:`新窗口`,embeddedOverlay:`嵌入式叠加层`,preferredSlicer:`首选切片软件`,preferredSlicerDescription:`通过 API 边车进行应用内切片所使用的切片软件`,openInSlicerLabel:`在切片软件中打开`,openInSlicerInherit:`与 API 切片软件相同`,openInSlicerDescription:`"在切片软件中打开"按钮使用的桌面切片软件。保持"与 API 切片软件相同"以继承设置，或选择不同的切片软件用于本地使用。`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev 存在已知 CLI 错误，无法切片许多 Bambu 创建的 3MF — 见上游 issue #12426（绘制的多挤出机文件 segfault）和 #13386（参数范围严格验证拒绝）。在上游修复发布之前，推荐使用 Bambu Studio。`,useSlicerApi:`使用切片器 API`,useSlicerApiDescription:`开启时，「切片」操作打开应用内切片器模态并调用 slicer-API sidecar。关闭时（默认），通过 URI 方案交给桌面切片器。`,slicerCard:`切片器`,orcaslicerApiUrl:`OrcaSlicer sidecar URL`,bambuStudioApiUrl:`Bambu Studio sidecar URL`,slicerStallTimeout:`切片器停滞超时（分钟）`,slicerStallTimeoutDescription:`若 sidecar 在此时长内没有任何进度，则放弃本次切片。持续报告进度的复杂模型无论耗时多久都不会被中断。不报告进度的 sidecar 则将此值作为总时长上限。`,slicerApiUrlDescription:`slicer-API sidecar 容器的 URL。留空以使用 SLICER_API_URL / BAMBU_STUDIO_API_URL 环境变量默认值。`,externalCameras:`外部摄像头`,costTracking:`成本追踪`,printsOnly:`仅打印`,totalConsumption:`总消耗`,dataManagement:`数据管理`,storageUsage:`存储使用情况`,storageUsageDescription:`按类别的数据使用情况明细`,storageUsageTotal:`总计`,storageUsageErrors:`错误`,storageUsageOtherBreakdown:`其他（包括静态资源、脚本和配置文件）`,storageUsageSystem:`系统`,storageUsageData:`数据`,storageUsageUnavailable:`存储使用信息不可用`,clearNotificationLogsDescription:`删除 30 天前的通知日志`,resetUiPreferencesDescription:`重置侧边栏顺序、主题、视图模式和布局偏好。打印机、归档和设置不受影响。`,enableHomeAssistant:`启用 Home Assistant`,enableMqtt:`启用 MQTT`,useTls:`使用 TLS`,enableMetricsEndpoint:`启用指标端点`,availableMetrics:`可用指标`,billingEnabled:`启用账单`,billingEnabledDescription:`对用户的打印进行收费并启用财务功能`,printerKillSwitch:`打印机紧急停止开关`,printerKillSwitchDescription:`立即停止未经授权的打印`,financeBudgetReset:`财务预算月度重置`,financeBudgetResetDay:`重置日期`,financeBudgetResetDayHelp:`对于少数月份,重置使用该月的最后一天。`,financeBudgetResetTimezone:`重置时区`,financeBudgetResetTimezoneHelp:`预算窗口的开始时间在此时区计算。`,rebuildLedger:`重建钱包账本`,rebuildLedgerStarted:`钱包账本重建已启动`,rebuildLedgerConfirmTitle:`重建钱包账本?`,rebuildLedgerConfirmMessage:`这将重建钱包账本以修复历史余额值。仅在您知道自己在做什么时才执行此操作。`,rebuildLedgerInProgress:`正在启动重建...`,editUser:`编辑用户`,deleteUserTitle:`删除用户`,groupName:`组名称`,leaveEmptyForAnonymous:`留空为匿名`,leaveEmptyForNoAuth:`留空为无认证`,enterNewPassword:`输入新密码`,confirmNewPassword:`确认新密码`,enterGroupName:`输入组名称`,enterDescriptionOptional:`输入描述（可选）`,enterCurrentPassword:`输入当前密码`,enterNewPasswordMin6:`输入新密码（至少 6 个字符）`,toast:{keyCopied:`密钥已复制到剪贴板`,copyFailed:`复制密钥失败`,keyAddedToBrowser:`密钥已添加到 API 浏览器`,clearLogsFailed:`清除日志失败`,uiPreferencesReset:`UI 偏好已重置。刷新中...`,authDisabled:`身份验证已成功禁用`,authDisableFailed:`禁用身份验证失败`,apiKeyCreated:`API 密钥已创建`,apiKeyDeleted:`API 密钥已删除`,userCreated:`用户创建成功`,userUpdated:`用户更新成功`,userDeleted:`用户删除成功`,groupCreated:`组创建成功`,groupUpdated:`组更新成功`,groupDeleted:`组删除成功`,fillRequiredFields:`请填写所有必填字段`,passwordsDoNotMatch:`密码不匹配`,passwordTooShort:`密码至少需要 8 个字符`,passwordNeedsUppercase:`密码必须至少包含一个大写字母`,passwordNeedsLowercase:`密码必须至少包含一个小写字母`,passwordNeedsDigit:`密码必须至少包含一个数字`,passwordNeedsSpecial:`密码必须至少包含一个特殊字符`,enterGroupName:`请输入组名称`,settingsSaved:`设置已保存`,noPermissionUpdate:`您没有权限更改设置`,cameraSettingsSaved:`摄像头设置已保存`,enterCameraUrl:`请输入摄像头 URL`,passwordChanged:`密码修改成功`,connectionFailed:`连接失败`,testFailed:`测试失败`,cameraConnected:`摄像头已连接{{resolution}}`,cameraConnectedCoalesced:`摄像头已连接{{resolution}}（与正在进行的抓取共享）`},testConnection:`测试连接`,catalog:{spoolCatalog:`耗材目录`,spoolCatalogDescription:`按品牌/类型的空耗材重量。用于添加耗材时的自动重量查找。`,searchCatalog:`搜索目录...`,addNewEntry:`添加新条目`,namePlaceholder:`名称（例如：Bambu Lab - 塑料）`,weight:`重量`,type:`类型`,default:`默认`,custom:`自定义`,noMatch:`没有条目匹配您的搜索`,empty:`目录中没有条目`,deleteEntry:`删除条目`,deleteConfirm:`确定要删除"{{name}}"吗？`,resetCatalog:`重置目录`,resetConfirm:`重置目录为默认值？这将移除所有自定义条目。`,loadFailed:`加载耗材目录失败`,nameWeightRequired:`名称和重量为必填项`,entryAdded:`条目已添加`,addFailed:`添加条目失败`,entryUpdated:`条目已更新`,updateFailed:`更新条目失败`,entryDeleted:`条目已删除`,deleteFailed:`删除条目失败`,resetSuccess:`目录已重置为默认值`,resetFailed:`重置目录失败`,exported:`已导出 {{count}} 条`,imported:`已导入 {{added}} 条（跳过 {{skipped}} 条）`,importFailed:`导入失败：无效的 JSON 格式`,exportTooltip:`导出目录为 JSON`,importTooltip:`从 JSON 导入目录`,resetTooltip:`重置为默认值`,selectedCount:`已选择 {{count}} 项`,deleteSelected:`删除所选`,bulkDeleteConfirm:`确定要删除 {{count}} 个条目吗？`,bulkDeleted:`已删除 {{count}} 个条目`,bulkDeleteFailed:`删除条目失败`,material:`材料`,spoolWeight:`线轴重量`,color:`颜色`,updateSpoolWeight:`更新线轴重量`,filamentUpdated:`耗材已更新`,filamentUpdateFailed:`更新耗材失败`,filamentUpdateInvalid:`耗材数据无效`,keepExistingSpoolWeight:`保留现有线轴的旧重量`,keepExistingSpoolWeightDesc:`已使用此耗材类型创建的线轴保留旧的皮重。新线轴使用更新后的值。`,applyToAllSpools:`应用到所有线轴`,applyToAllSpoolsDesc:`此耗材类型的所有重量计算立即使用新的皮重。`},colorCatalog:{title:`颜色目录`,description:`按制造商/材料的耗材颜色。用于添加耗材时的自动颜色查找。`,searchColors:`搜索颜色...`,allManufacturers:`所有制造商`,addNewColor:`添加新颜色`,manufacturer:`制造商`,colorName:`颜色名称`,hex:`十六进制`,materialOptional:`材料（可选）`,showing:`显示 {{filtered}} / {{total}} 种颜色`,noMatch:`没有颜色匹配您的搜索`,empty:`目录中没有颜色`,deleteColor:`删除颜色`,deleteConfirm:`确定要删除"{{name}}"吗？`,resetCatalog:`重置颜色目录`,resetConfirm:`重置目录为默认值？这将移除所有自定义颜色。`,sync:`同步`,starting:`启动中...`,syncTooltip:`从 FilamentColors.xyz 同步（2000+ 种颜色，可能需要一分钟）`,loadFailed:`加载颜色目录失败`,fieldsRequired:`制造商、颜色名称和十六进制颜色为必填项`,colorAdded:`颜色已添加`,addFailed:`添加颜色失败`,colorUpdated:`颜色已更新`,updateFailed:`更新颜色失败`,colorDeleted:`颜色已删除`,deleteFailed:`删除颜色失败`,resetSuccess:`颜色目录已重置为默认值`,resetFailed:`重置目录失败`,syncUpToDate:`已是最新（检查了 {{count}} 种颜色）`,syncComplete:`添加了 {{added}} 种新颜色（{{skipped}} 种已存在）`,syncError:`同步错误`,syncFailed:`从 FilamentColors.xyz 同步失败`,exported:`已导出 {{count}} 种颜色`,imported:`已导入 {{added}} 种颜色（跳过 {{skipped}} 种）`,importFailed:`导入失败：无效的 JSON 格式`,selectedCount:`已选择 {{count}} 项`,deleteSelected:`删除所选`,bulkDeleteConfirm:`确定要删除 {{count}} 种颜色吗？`,bulkDeleted:`已删除 {{count}} 种颜色`,bulkDeleteFailed:`删除颜色失败`},dateFormat:`日期格式`,dateFormatUs:`美式 (MM/DD/YYYY)`,dateFormatEu:`欧式 (DD/MM/YYYY)`,dateFormatIso:`ISO (YYYY-MM-DD)`,timeFormat:`时间格式`,timeFormat12:`12小时制 (3:30 PM)`,timeFormat24:`24小时制 (15:30)`,defaultPrinter:`默认打印机`,defaultPrinterDescription:`为上传、重印和其他操作预选此打印机。`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`使用侧边栏布局重新排序项目、重置可见性并管理自定义链接。`,setDefault:`设为默认`,sidebarOrderSetDefaultHint:`设为默认将当前菜单顺序应用于尚未自定义的用户。`,sidebarDefaultSet:`已设置默认菜单顺序。`,sidebarDefaultCleared:`已清除默认菜单顺序。`,sidebarDefaultFailed:`设置默认菜单顺序失败。`,reset:`重置`,darkMode:`深色模式`,lightMode:`浅色模式`,active:`(当前)`,background:`背景`,accent:`强调色`,style:`样式`,bgNeutral:`中性`,bgWarm:`暖色`,bgCool:`冷色`,bgOled:`OLED 纯黑`,bgSlate:`石板蓝`,bgForest:`森林绿`,accentGreen:`绿色`,accentTeal:`青色`,accentBlue:`蓝色`,accentOrange:`橙色`,accentPurple:`紫色`,accentRed:`红色`,styleClassic:`经典`,styleGlow:`发光`,styleVibrant:`鲜艳`,themeToggleHint:`使用侧边栏中的图标在深色、浅色和系统模式之间切换。`,progressInTitle:`在标签页显示打印进度`,progressInTitleDescription:`在浏览器标签页中显示当前打印的百分比和进度环。`,autoArchivePrints:`自动归档打印`,autoArchiveDescription:`打印完成时自动保存3MF文件`,saveThumbnailsDescription:`从3MF文件中提取并保存预览图像`,captureFinishPhotoDescription:`打印完成时从打印机摄像头拍照。Bambuddy 会在打印期间录制一段短延时摄影，以便从热床下降前的瞬间获取照片；如果您为本次打印启用了延时摄影，文件将保留，否则会在拍照完成后自动删除。`,finishPhotoRestorePlate:`为完成照片抬升热床`,finishPhotoRestorePlateDescription:`打印结束时打印机会将热床下降约 100 mm，使完成的模型落在相机取景范围之下。Bambuddy 会将热床抬回到最后一层打印高度略上方，拍摄照片后再次下降。若打印高度未知或队列中还有其他任务，则跳过此步骤。`,ffmpegNotInstalled:`未安装ffmpeg`,ffmpegRequired:`摄像头捕获需要ffmpeg。通过 <brew>brew install ffmpeg</brew>（macOS）或 <apt>apt install ffmpeg</apt>（Linux）安装。`,camera:`摄像头`,cameraViewMode:`摄像头查看模式`,cameraOverlayDescription:`摄像头在主屏幕上以可调大小的覆盖层打开`,cameraWindowDescription:`摄像头在单独的浏览器窗口中打开`,externalCamerasDescription:`配置外部摄像头以替换内置打印机摄像头。支持MJPEG流、RTSP、HTTP快照和USB摄像头（V4L2）。启用后，外部摄像头将用于实时查看和完成照片。`,cameraPlaceholderUsb:`设备路径 (/dev/video0)`,cameraPlaceholderUrl:`摄像头URL (rtsp://... 或 http://...)`,cameraTypeMjpeg:`MJPEG 流`,cameraTypeRtsp:`RTSP 流`,cameraTypeSnapshot:`HTTP 快照`,cameraTypeUsb:`USB 摄像头 (V4L2)`,cameraSnapshotUrl:`快照 URL（可选）`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`用于通知缩略图、完成照片、层延时摄影帧和打印板检测的单帧 URL。延时摄影和打印板检测各自需要自己的每打印机开关 — 此 URL 只是它们激活时拉取的图像源。留空以从上方实时流捕获。适用于 go2rtc（/api/frame.jpeg）和具有专用快照端点的 IP 摄像头。`,cameraRotation:`旋转`,test:`测试`,connected:`已连接`,disconnected:`未连接`,currency:`货币`,defaultFilamentCost:`默认耗材成本（每公斤）`,electricityCost:`每千瓦时电费`,energyDisplayMode:`能源显示模式`,energyModePrintDescription:`仪表板显示打印期间使用的能源总和`,energyModeTotalDescription:`仪表板显示智能插座的累计能源`,fileManager:`文件管理器`,createArchiveEntry:`打印时创建归档条目`,createArchiveEntryDescription:`从文件管理器打印时，可选择创建归档条目`,lowDiskSpaceWarning:`磁盘空间不足警告`,lowDiskSpaceDescription:`当可用磁盘空间低于此阈值时显示警告`,printerFirmware:`打印机固件`,checkFirmwareDescription:`检查Bambu Lab的打印机固件更新`,bambuddySoftware:`Bambuddy 软件`,autoCheckDescription:`启动时自动检查新版本`,checkNow:`立即检查`,updateAvailableVersion:`可用更新：v{{version}}`,releaseNotes:`发布说明`,updateViaDocker:`通过 Docker Compose 更新：`,composeDirectory:`Compose 目录`,composeDirectoryHint:`存放 docker-compose.yml 的目录。留空则不添加 cd。`,copyUpdateCommand:`复制更新命令`,updateViaHomeAssistant:`更新由 Home Assistant Supervisor 管理。请在 Home Assistant 中打开 设置 → 加载项 → Bambuddy 以安装新版本。`,updateViaWindowsInstaller:`Windows 安装通过重新运行安装程序来更新。请在下方下载新版本 — 您的数据、设置和打印机都会保留。`,downloadWindowsInstaller:`下载 v{{version}} 安装程序`,installUpdate:`安装更新`,latestVersionRunning:`您正在运行最新版本`,failedToCheckUpdates:`检查更新失败：{{error}}`,backupRestore:`备份与恢复`,backupRestoreDescription:`导出/导入设置并配置GitHub备份`,goToBackup:`前往备份`,externalUrl:`外部URL`,externalUrlDescription:`Bambuddy可访问的外部URL。用于通知图像和外部集成。`,bambuddyUrl:`Bambuddy URL`,externalUrlHint:`包含协议和端口（例如：http://192.168.1.100:8000）`,ftpRetry:`FTP重试`,ftpRetryDescription:`当打印机WiFi不稳定时重试FTP操作。适用于3MF下载、打印上传、延时摄影下载和固件更新。`,autoRetryDescription:`自动重试失败的FTP操作`,retryAttempts:`重试次数`,retryDelay:`重试延迟`,connectionTimeout:`连接超时`,time_one:`{{count}}次`,time_other:`{{count}}次`,second_one:`{{count}}秒`,second_other:`{{count}}秒`,nSeconds:`{{count}}秒`,increaseForWeakWifi:`对WiFi信号弱的打印机增加此值`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`连接到Home Assistant，通过HA REST API控制智能插座。支持switch、light、input_boolean和script实体。`,homeAssistantUrl:`Home Assistant URL`,longLivedAccessToken:`长期访问令牌`,haTokenHint:`在HA中创建令牌：个人资料 → 长期访问令牌 → 创建令牌`,connectionSuccessful:`连接成功`,connectionFailed:`连接失败`,haConnectionSuccess:`已成功连接到Home Assistant。`,haConnectionFailed:`连接Home Assistant失败。`,mqttPublishing:`MQTT发布`,mqttDescription:`将BamBuddy事件发布到外部MQTT代理，用于与Node-RED、Home Assistant和其他自动化系统集成。`,mqttEnableDescription:`向外部MQTT代理发布事件`,brokerHostname:`代理主机名`,port:`端口`,usernameOptional:`用户名（可选）`,passwordOptional:`密码（可选）`,topicPrefix:`主题前缀`,topicPrefixHint:`主题格式：{{prefix}}/printers/<serial>/status 等`,prometheusMetrics:`Prometheus 指标`,prometheusEndpointDescription:`在 <code>/api/v1/metrics</code> 公开打印机指标，用于Prometheus/Grafana监控。`,bearerTokenOptional:`Bearer令牌（可选）`,bearerTokenHint:`设置后，请求必须包含 <code>Authorization: Bearer <token></code>`,metricsConnectionStatus:`连接状态`,metricsPrinterState:`打印机状态（空闲/打印中等）`,metricsPrintProgress:`打印进度 0-100%`,metricsBedTemp:`热床温度`,metricsNozzleTemp:`喷嘴温度`,metricsPrintsTotal:`按结果分类的总打印数`,metricsMore:`...以及更多（层数、风扇、队列、耗材用量）`,smartPlugsDescription:`连接智能插座（Tasmota或Home Assistant）以自动化电源控制并跟踪打印机的能源使用情况。`,allOn:`全部开启`,allOff:`全部关闭`,addSmartPlug:`添加智能插座`,energySummary:`能源概要`,currentPower:`当前功率`,plugsOnline:`{{reachable}}/{{total}} 个插座在线`,today:`今天`,yesterday:`昨天`,total:`总计`,enablePlugsForSummary:`启用插座以查看能源概要`,addNotificationProvider:`添加`,systemBadge:`(系统)`,creating:`创建中...`,changing:`修改中...`,deleteUserAndItems:`删除用户及其所有项目`,deleteUserKeepItems:`删除用户，保留项目（将变为无主项目）`,ok:`确定`,twoFa:{totpTitle:`身份验证器应用 (TOTP)`,totpDesc:`使用 Google Authenticator、Aegis 或 Authy 等应用。`,emailOtpTitle:`邮件 OTP`,emailOtpDesc:`登录时向 {{email}} 发送一次性验证码。`,emailOtpNoEmail:`请先为账户添加邮箱地址以启用此方式。`,addEmailFirst:`您的账户没有邮箱地址，请联系管理员添加。`,setupTotp:`设置身份验证器应用`,setupAuthApp:`设置身份验证器应用`,setupInstructions:`使用身份验证器应用扫描二维码，然后输入验证码确认。`,manualEntry:`无法扫描？请手动输入此密钥：`,scannedContinue:`已扫描 — 继续`,enterCodeToConfirm:`请输入身份验证器应用中的6位验证码以确认设置。`,activate:`激活`,disableTotp:`停用身份验证器`,disableConfirmHint:`请输入有效的 TOTP 码或备用码来停用身份验证器。`,totpDisabled:`身份验证器应用已停用。`,emailOtpEnabled:`邮件 OTP 已启用。`,emailOtpDisabled:`邮件 OTP 已停用。`,smtpRequired:`请先配置并测试SMTP设置。`,invalidCode:`无效验证码，请重试。`,enableEmailOtp:`启用邮件 OTP`,disableEmailOtp:`停用邮件 OTP`,emailSetupEnterCode:`验证码已发送至您的邮箱地址。请在下方输入以确认您拥有此邮箱。`,verifyAndEnable:`验证并启用`,emailDisablePasswordHint:`请输入您的账户密码以确认停用邮件 OTP。`,passwordPlaceholder:`输入您的密码`,backupCodesTitle:`保存备用码`,backupCodesWarning:`请将这些码保存在安全的地方。每个码只能使用一次，且不会再次显示。`,backupCodesRemaining:`剩余 {{count}} 个备用码`,savedCodes:`已保存`,regenBackup:`重新生成备用码`,regenBackupHint:`输入当前 TOTP 码以生成 10 个新备用码，所有现有备用码将失效。`,newBackupCodes:`新备用码`,linkedAccounts:`已关联的 SSO 账户`,linkedAccountsDesc:`以下外部身份提供商已与您的账户关联。`,oidcUnlinked:`账户已解除关联。`},sessionPolicy:{title:`会话策略`,description:`新用户登录的最长会话有效期。已颁发的令牌保留其原有的过期时间。`,preset24h:`24 小时`,preset7d:`7 天`,preset30d:`30 天`,customHoursLabel:`自定义会话有效期（小时）`,hoursSuffix:`小时`,warning:`更长的会话会减弱自动注销保护。仅建议在受信任的单用户部署中使用。`},oidc:{title:`SSO / OIDC 提供商`,desc:`配置 OpenID Connect 提供商以实现单点登录。`,addProvider:`添加提供商`,newProvider:`新提供商`,empty:`尚未配置 OIDC 提供商。`,created:`提供商已创建。`,updated:`提供商已更新。`,deleted:`提供商已删除。`,refreshIcon:`刷新图标`,removeIcon:`移除图标`,iconRefreshed:`图标已刷新。`,iconRemoved:`图标已移除。`,iconFetchFailed:`无法从提供商 URL 获取图标。`,deleteTitle:`删除提供商`,deleteMessage:`删除"{{name}}"？所有关联账户将断开连接。`,form:{name:`显示名称`,issuerUrl:`颁发者 URL`,clientId:`客户端 ID`,clientSecret:`客户端密钥`,scopes:`作用域`,iconUrl:`图标 URL（可选）`,enabled:`已启用`,autoCreate:`自动创建用户`,autoCreateDesc:`首次登录时自动创建本地账户。`,autoLink:`自动关联已有账户`,autoLinkDesc:`首次登录时通过邮箱匹配现有本地账户并自动关联。`,secretHint:`留空以保留当前`,secretPlaceholder:`新密钥`,emailClaim:`邮箱声明`,emailClaimDesc:`用作邮箱身份的 JWT 声明。Azure Entra ID 请使用 'preferred_username' 或 'upn'（不发送 email_verified）。仅使用可信的声明名称。`,emailClaimPlaceholder:`邮箱`,emailClaimCustomClaimAutoLinkWarning:`自定义声明仅在值由租户管理时（例如 Azure Entra ID 的 upn / preferred_username）对自动关联安全。如果您的 IdP 允许用户自我声明此声明，请勿启用自动关联。`,requireEmailVerified:`要求邮箱已验证`,requireEmailVerifiedDesc:`仅在提供商将邮箱声明标记为已验证时才接受。`,requireEmailVerifiedWarning:`警告：将在未经验证的情况下接受邮箱。仅对受信任的提供商使用。`,requireEmailVerifiedAutoLink:`请先禁用自动关联以更改此设置。`,defaultGroup:`默认组`,defaultGroupDesc:`自动创建用户时分配的组。未设置时回退到 Viewers。`,defaultGroupViewersFallback:`Viewers（默认）`,autologin:`自动登录`,autologinDesc:`将未认证的访问者直接重定向到该提供商。只有一个提供商可以携带此标志。`}},encryption:{title:`MFA 加密状态`,enabledFromEnv:`已启用静态加密（密钥来自 MFA_ENCRYPTION_KEY 环境变量）`,enabledFromFile:`已启用静态加密（密钥从数据目录加载）`,enabledGenerated:`使用自动生成的密钥启用静态加密`,notConfigured:`未配置静态加密`,notConfiguredDesc:`TOTP 密钥和 OIDC client_secrets 以明文存储。请设置 MFA_ENCRYPTION_KEY 或使用可写数据目录重启 Bambuddy 以自动生成。`,allEncrypted:`所有 MFA 密钥均已静态加密。`,legacyRowsLabel:`旧版明文行`,encryptedRowsLabel:`已加密行`,legacyRowsWarning:`检测到 {{count}} 个旧版明文行。请重新保存 OIDC 提供商或重新注册用户的身份验证器应用，以迁移到加密存储。`,backupHint:`自动生成的密钥存储在 DATA_DIR/.mfa_encryption_key 中，并包含在本地备份 ZIP 中。请保护备份安全或显式设置 MFA_ENCRYPTION_KEY。`,decryptionBrokenTitle:`加密密钥缺失`,decryptionBrokenError:`无法解密 {{count}} 条加密记录，因为加密密钥不再可用。请恢复以前的 MFA_ENCRYPTION_KEY 或 DATA_DIR/.mfa_encryption_key 以恢复访问。`,migrationErrorWarning:`{{count}} 行旧数据在启动时未能重新加密。请检查服务器日志并重启 Bambuddy 以重试。`},pipelineLimits:{title:`切片机流水线限制`,maxCopiesLabel:`每次运行最大副本数`,maxCopiesDesc:`操作员运行流水线时可请求的副本数上限。服务器端硬性上限为 1000。`},pipelines:{title:`切片机流水线`,subtitle:`可复用的预设捆绑包（打印机 + 工艺 + 耗材 + 热床类型）。在切片对话框中保存一个，下次切片文件时一键应用。`,loading:`正在加载流水线…`,loadError:`无法加载流水线。`,confirmDelete:`删除此流水线？此操作无法撤销。`,staleWarning:`引用的一个或多个预设已不存在。请在切片对话框中重新保存此流水线以修复。`,empty:{title:`暂无流水线。`,howto:`为任意文件打开切片对话框，选择打印机 / 工艺 / 耗材 / 热床，然后点击"另存为流水线"。保存的流水线将显示在此处。`},field:{name:`流水线名称`,description:`描述`,targetPrinter:`目标打印机`,noTarget:`— 无目标 —`,targetKind:`目标类型`,targetKindSpecific:`特定打印机`,targetKindClass:`打印机类别`,targetModelClass:`打印机型号`,fanoutStrategy:`分发策略`,fanout:{max_parallel:`最大并行 — 分发到任何空闲匹配的打印机`,round_robin:`轮询 — 在合格打印机间循环`,fill_one_first:`先填一台 — 将所有副本固定到一台打印机`},fanoutShort:{max_parallel:`并行`,round_robin:`轮询`,fill_one_first:`先填一台`}},action:{save:`保存`,cancel:`取消`,rename:`重命名`,delete:`删除`},slot:{printer:`打印机`,process:`工艺`,filament:`耗材`,filamentN:`耗材 {{n}}`,filamentAll:`全部 {{n}} 个槽`,bed:`热床`},group:{profiles:`配置文件`,filaments:`耗材`},searchPlaceholder:`搜索流水线…`,filterTargetType:`按目标类型筛选`,filterTarget:`按目标筛选`,filter:{all:`全部目标`,noTarget:`未设置目标`,count:`{{shown}} / {{total}}`,noMatches:`没有流水线匹配当前筛选条件。`},toast:{saved:`流水线已保存`,saveFailed:`保存失败`,deleted:`流水线已删除`,deleteFailed:`删除失败`},noTargetHint:`设置目标打印机以运行`,noTargetWarning:`运行此流水线前请先设置目标打印机。`,runs:{lastRun:`上次运行`,status:{queued:`排队中`,slicing:`切片中`,dispatching:`发送中`,in_progress:`打印中`,completed:`已完成`,failed:`失败`,partial_failure:`部分失败`,cancelled:`已取消`}}}},notification:{printStarted:{title:`打印已开始`,body:`{{printer}}：{{filename}} 已开始打印`},printCompleted:{title:`打印已完成`,body:`{{printer}}：{{filename}} 已成功完成`},printFailed:{title:`打印失败`,body:`{{printer}}：{{filename}} 打印失败`},printStopped:{title:`打印已停止`,body:`{{printer}}：{{filename}} 已停止`},printProgress:{title:`打印进度`,body:`{{printer}}：{{filename}} 已完成 {{percent}}%`},printerOffline:{title:`打印机离线`,body:`{{printer}} 已离线`},printerError:{title:`打印机错误`,body:`{{printer}}：{{error}}`},filamentLow:{title:`耗材不足`,body:`{{printer}}：耗材即将用完`},maintenanceDue:{title:`维护到期`,body:`{{printer}}：{{items}} 需要关注`}},errors:{generic:`出了点问题`,networkError:`网络错误。请检查您的连接。`,notFound:`未找到`,unauthorized:`未授权`,serverError:`服务器错误`,validationError:`请检查您的输入`,printerConnectionFailed:`连接打印机失败`,saveFailed:`保存更改失败`,deleteFailed:`删除失败`,loadFailed:`加载数据失败`},hmsErrors:{title:`错误 - {{name}}`,noErrors:`无错误`,viewOnWiki:`在拓竹 Wiki 上查看`,mqttVerifyFailedRemedy:`在打印机上启用开发者模式，重启打印机，然后重新开始该任务。`,unknownCode:`未知 HMS 代码 — 详情请参阅拓竹 Wiki。`,clearInstructions:`在打印机上清除错误以在此处消除它们。`,clearErrors:`清除错误`,clearSuccess:`HMS 错误已清除`,clearFailed:`清除 HMS 错误失败`,actionSuccess:`已向打印机发送操作`,actionFailed:`操作发送失败`,runoutExpectedSlot:`{{ranOut}} 的耗材已用尽。打印机现在正在等待 {{expected}} 装入兼容耗材。请将料卷装入 {{expected}}，然后选择"重试"。`,runoutExpectedSlotOnly:`打印机正在等待 {{expected}} 装入兼容耗材。请在该料槽装入料卷，然后选择"重试"。`,runoutSlotUnknown:`耗材已用尽，打印已暂停。Bambuddy 无法确定打印机现在需要哪个料槽——请在打印机屏幕上查看所请求的料槽。`,actions:{RESUME_PRINTING:`恢复打印`,RESUME_PRINTING_DEFECTS:`恢复 (缺陷可接受)`,RESUME_PRINTING_PROBELM_SOLVED:`恢复 (问题已解决)`,STOP_PRINTING:`停止打印`,CHECK_ASSISTANT:`查看助手`,FILAMENT_EXTRUDED:`已挤出耗材，继续`,RETRY_FILAMENT_EXTRUDED:`尚未挤出，重试`,CONTINUE:`已完成，继续`,LOAD_VIRTUAL_TRAY:`加载耗材`,OK_BUTTON:`确定`,FILAMENT_LOAD_RESUME:`耗材已加载，恢复`,JUMP_TO_LIVEVIEW:`查看实时画面`,NO_REMINDER_NEXT_TIME:`下次不再提醒`,REFRESH_NOZZLE:`重新检查`,IGNORE_NO_REMINDER_NEXT_TIME:`忽略，下次不再提醒`,IGNORE_RESUME:`忽略并恢复`,PROBLEM_SOLVED_RESUME:`问题已解决，恢复`,TURN_OFF_FIRE_ALARM:`知道了，关闭火警`,RETRY_PROBLEM_SOLVED:`重试 (问题已解决)`,CANCLE:`取消`,STOP_DRYING:`停止干燥`,PROCEED:`继续`,OK_JUMP_RACK:`确定`,ABORT:`终止`,DISABLE_PURIFICATION:`本次打印禁用空气净化`,DONT_REMIND_NEXT_TIME:`不再提醒`,DBL_CHECK_CANCEL:`取消`,DBL_CHECK_DONE:`完成`,DBL_CHECK_RETRY:`重试`,DBL_CHECK_RESUME:`恢复`,DBL_CHECK_OK:`确认`,REMOVE_CLOSE_BTN:`关闭`}},mqttDebug:{title:`MQTT 调试日志`,searchPlaceholder:`搜索主题或负载...`,noMessages:`尚未记录消息`,startLoggingHint:`点击"开始记录"以开始捕获 MQTT 消息`,noMessagesMatch:`没有消息匹配您的筛选条件`,adjustFilterHint:`尝试调整您的搜索或筛选条件`,incoming:`传入`,outgoing:`传出`,loggingStopped:`记录已停止`,loggingActive:`记录中 - 消息将自动刷新`,startLogging:`开始记录`,stopLogging:`停止记录`,clearLog:`清除日志`,topic:`主题`,timestamp:`时间戳`,direction:`方向`,all:`全部`},printerFiles:{zipStarted_one:`已开始下载 {{count}} 个文件的 ZIP`,zipStarted_other:`已开始下载 {{count}} 个文件的 ZIP`,zipPartial:`已开始下载 ZIP，共 {{total}} 个文件中成功获取 {{successful}} 个，其余文件无法获取`,downloadFailed:`下载失败：{{error}}`,unknownError:`未知错误`,shiftSelectHint:`按住 Shift 单击以选择范围`,selectFile:`选择 {{name}}`,deselectFile:`取消选择 {{name}}`,title:`文件管理器`,storageUsed:`已用：`,storageFree:`剩余：`,filterPlaceholder:`筛选文件...`,deleteButton:`删除`,deleteFiles:`删除 {{count}} 个文件`,deleteFileConfirm:`删除"{{name}}"？此操作无法撤销。`,deleteFilesConfirm:`删除 {{count}} 个选中的文件？此操作无法撤销。`,noFiles:`打印机上没有文件`,printerUnavailable:`打印机文件服务不可用。请在打印机可访问时重试。`,loadingFiles:`加载文件中...`,failedToLoad:`加载文件失败`,toast:{filesDeleted:`已删除 {{count}} 个文件`,deleteFailed:`删除失败：{{error}}`}},confirm:{delete:`确定要删除吗？`,unsavedChanges:`您有未保存的更改。确定要离开吗？`,clearQueue:`确定要清空队列吗？`},login:{title:`Bambuddy 登录`,subtitle:`登录您的账户`,username:`用户名`,usernamePlaceholder:`输入您的用户名`,usernameOrEmail:`用户名或邮箱`,usernameOrEmailPlaceholder:`用户名或 @ 邮箱`,password:`密码`,passwordPlaceholder:`输入您的密码`,signIn:`登录`,signingIn:`登录中...`,rememberMe:`记住我`,forgotPassword:`忘记密码？`,autologinFailed:`自动SSO登录失败。请在下方选择一个提供商以继续。`,localDisabledNotice:`本地登录已禁用。请使用下方的SSO提供商之一。`,loginSuccess:`登录成功`,loginFailed:`登录失败`,enterCredentials:`请输入用户名和密码`,enterEmail:`请输入您的电子邮件地址`,oidcLoginFailed:`OIDC 登录失败`,oidcErrors:{providerError:`身份提供商返回了一个错误`,missingParameters:`OIDC 回调缺少必要参数`,invalidState:`OIDC 状态无效或已被使用`,stateExpired:`OIDC 登录会话已过期，请重试`,providerNotFound:`未找到 OIDC 提供商`,discoveryFailed:`无法获取 OIDC 发现文档`,invalidDiscovery:`OIDC 发现文档无效`,networkError:`OIDC 令牌交换时出现网络错误`,badResponse:`OIDC 令牌交换时收到意外响应`,noIdToken:`OIDC 提供商未返回 ID 令牌`,validationFailed:`OIDC 令牌验证失败`,nonceMismatch:`OIDC nonce 不匹配，可能存在重放攻击`,missingSubClaim:`OIDC 令牌缺少 sub 声明`,noLinkedAccount:`没有与此 OIDC 身份关联的本地帐户`,accountInactive:`您的帐户已被停用`,userResolutionFailed:`无法解析您的帐户`,internalError:`OIDC 登录过程中发生内部错误`,tokenExchangeFailed:`OIDC 令牌交换失败`},forgotPasswordTitle:`忘记密码`,forgotPasswordMessage:`如果您忘记了密码，请联系系统管理员进行重置。`,forgotPasswordEmailMessage:`输入您的邮箱地址，我们将向您发送新密码。`,emailAddress:`邮箱地址`,emailPlaceholder:`your.email@example.com`,cancel:`取消`,sending:`发送中...`,sendResetEmail:`发送重置邮件`,howToReset:`如何重置密码：`,resetStep1:`联系您的 Bambuddy 管理员`,resetStep2:`请他们在用户管理中重置您的密码`,resetStep3:`他们可以为您设置一个临时密码`,resetStep4:`使用新密码登录并在设置中修改密码`,gotIt:`知道了`,resetPassword:{title:`设置新密码`,subtitle:`请在下方输入并确认您的新密码。`,newPassword:`新密码`,newPasswordPlaceholder:`至少 8 个字符`,confirmPassword:`确认密码`,confirmPasswordPlaceholder:`重复输入新密码`,saving:`保存中…`,submit:`设置新密码`,backToLogin:`返回登录`,passwordsDoNotMatch:`密码不匹配`,passwordTooShort:`密码至少需要 8 个字符`,resetFailed:`密码重置失败。链接可能已过期。`},twoFA:{title:`两步验证`,subtitle:`您的账户已启用两步验证。请在下方输入验证码。`,methodAuthenticator:`身份验证器应用`,methodEmail:`邮箱验证码`,methodBackup:`备用恢复码`,instructionsTotp:`请打开您的身份验证器应用，输入 Bambuddy 的 6 位验证码。`,instructionsEmail:`6 位验证码已发送至您的邮箱，有效期为 10 分钟。`,instructionsEmailNotSent:`点击下方按钮，通过邮件获取验证码。`,instructionsBackup:`请输入您的一个 8 位备用恢复码。每个恢复码只能使用一次。`,sendCodeButton:`发送邮箱验证码`,sendingCode:`发送中...`,resendCode:`重新发送验证码`,codeLabel:`验证码`,backupCodeLabel:`备用恢复码`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`验证`,verifyingButton:`验证中...`,backToLogin:`← 返回登录页面`,orContinueWith:`或通过以下方式登录`,signInWith:`使用 {{provider}} 登录`,enterCode:`请输入验证码`,sendCodeFailed:`验证码发送失败`,invalidCode:`无效验证码，请重试。`}},setup:{title:`Bambuddy 设置`,subtitle:`为您的 Bambuddy 实例配置身份验证`,enableAuth:`启用身份验证`,adminAccount:`管理员账户`,adminAccountDesc:`如果管理员用户已存在，将使用现有管理员账户启用身份验证。如需使用现有管理员，请将下方字段留空，或输入新凭据创建新管理员用户。`,adminUsername:`管理员用户名`,adminPassword:`管理员密码`,optionalIfAdminExists:`（如管理员用户已存在则为可选）`,adminUsernamePlaceholder:`输入管理员用户名（可选）`,adminPasswordPlaceholder:`输入管理员密码（可选）`,confirmPassword:`确认密码`,confirmPasswordPlaceholder:`确认管理员密码`,settingUp:`设置中...`,completeSetup:`完成设置`,toast:{authEnabledAdminCreated:`身份验证已启用并创建了管理员用户`,authEnabledExistingAdmins:`使用现有管理员用户启用了身份验证`,setupCompleted:`设置完成`,enterBothCredentials:`请输入管理员用户名和密码，或将两者留空以使用现有管理员用户`,passwordsDoNotMatch:`密码不匹配`,passwordTooShort:`密码至少需要 6 个字符`}},changePassword:{title:`修改密码`,currentPassword:`当前密码`,currentPasswordPlaceholder:`输入当前密码`,newPassword:`新密码`,newPasswordPlaceholder:`输入新密码（至少 6 个字符）`,confirmPassword:`确认新密码`,confirmPasswordPlaceholder:`确认新密码`,passwordsDoNotMatch:`密码不匹配`,passwordTooShort:`密码至少需要 6 个字符`,changing:`修改中...`,success:`密码修改成功`,failed:`密码修改失败`},plateAlert:{title:`打印已暂停！`,message:`在构建板上检测到物体。打印已自动暂停。请清理打印板并继续打印。`,understand:`我知道了`},camera:{title:`摄像头视图`,invalidPrinterId:`无效的打印机 ID`,live:`实时`,snapshot:`快照`,restartStream:`重启流`,refreshSnapshot:`刷新快照`,fullscreen:`全屏`,exitFullscreen:`退出全屏`,connectingToCamera:`连接摄像头中...`,capturingSnapshot:`拍摄快照中...`,connectionLost:`连接已断开`,connectionFailed:`摄像头连接失败`,reconnecting:`{{countdown}} 秒后重新连接...（第 {{attempt}}/{{max}} 次尝试）`,reconnectNow:`立即重新连接`,cameraUnavailable:`摄像头不可用`,cameraUnavailableDesc:`请确保打印机已通电并已连接。`,noCamera:`无可用摄像头`,retry:`重试`,cameraStream:`摄像头流`,zoomOut:`缩小`,zoomIn:`放大`,resetZoom:`重置缩放`,recording:`录制中`,startRecording:`开始录制`,stopRecording:`停止录制`,chamberLight:`切换腔室灯`,unavailable:`摄像头不可用`,diagnose:{button:`诊断`,modalTitle:`摄像头诊断`,running:`正在运行诊断...`,runFailed:`无法运行诊断: {{error}}`,retry:`重新运行`,stage:{tcp_reachable:`网络可达性`,first_frame:`画面捕获`,live_stream_active:`直播流正在进行`},summary:{all_ok:`摄像头工作正常。诊断已成功完成所有阶段。`,live_stream_active_healthy:`摄像头正在传输最新画面 — 无需测试。`,printer_unreachable:`无法访问打印机。请检查 IP 地址、网络连接以及打印机是否已开机。`,camera_port_closed:`打印机可访问，但摄像头端口已关闭。请确保打印机设置中已启用仅 LAN 模式和开发者模式。`,no_frame:`已连接到摄像头，但未收到画面。请重试或检查打印机设置中摄像头是否已启用。`,unknown_failure:`摄像头诊断因未知原因失败。请查看支持日志了解详情。`},meta:{protocol:`协议`,port:`端口`,profile:`配置`}}},groups:{title:`组管理`,subtitle:`管理访问控制的权限组`,backToSettings:`返回设置`,createGroup:`创建组`,noPermission:`您没有访问此页面的权限。`,system:`系统`,noDescription:`无描述`,usersCount:`{{count}} 个用户`,permissionsCount:`{{count}} 个权限`,edit:`编辑`,delete:`删除`,toast:{created:`组创建成功`,updated:`组更新成功`,deleted:`组删除成功`,enterGroupName:`请输入组名称`},modal:{editGroup:`编辑组`,createGroup:`创建组`,cancel:`取消`,saving:`保存中...`,creating:`创建中...`,saveChanges:`保存更改`},form:{groupName:`组名称`,groupNamePlaceholder:`输入组名称`,systemGroupWarning:`系统组名称不可更改`,description:`描述`,descriptionPlaceholder:`输入描述（可选）`,permissions:`权限（已选 {{count}} 个）`},deleteModal:{title:`删除组`,message:`确定要删除此组吗？此组中的用户将失去这些权限。`,confirm:`删除组`},editor:{title:`编辑组`,createTitle:`创建组`,search:`搜索权限...`,selectAll:`全选`,clearAll:`清除全部`,permissionsSelected:`已选 {{count}} 个`,noResults:`没有权限匹配您的搜索`,websocketHint:`实时更新所需。缺少此权限时，界面将回退到定期轮询。`}},users:{title:`用户管理`,subtitle:`管理用户及其对 Bambuddy 实例的访问`,backToSettings:`返回设置`,createUser:`创建用户`,noPermission:`您没有访问此页面的权限。`,admin:`管理员`,noGroups:`无组`,active:`活跃`,inactive:`非活跃`,edit:`编辑`,delete:`删除`,system:`系统`,noGroupsAvailable:`无可用组`,table:{username:`用户名`,groups:`组`,status:`状态`,actions:`操作`},toast:{created:`用户创建成功`,updated:`用户更新成功`,deleted:`用户删除成功`,fillRequired:`请填写所有必填字段`,passwordsDoNotMatch:`密码不匹配`,passwordTooShort:`密码至少需要 6 个字符`,ldapProvisioned:`已创建 LDAP 用户「{{username}}」`},modal:{createUser:`创建用户`,editUser:`编辑用户`,cancel:`取消`,creating:`创建中...`,saving:`保存中...`,saveChanges:`保存更改`,advancedAuthSubtitle:`使用高级认证`,tabsAriaLabel:`用户来源`,localTab:`本地`,ldapTab:`LDAP`,ldapSearchLabel:`搜索目录`,ldapSearchPlaceholder:`输入用户名、姓名或电子邮件...`,ldapMinChars:`输入至少 2 个字符以搜索`,ldapTypeToSearch:`开始输入以搜索 LDAP 目录`,ldapSearching:`搜索目录中...`,ldapNoResults:`目录中没有匹配的用户`,ldapSearchError:`目录搜索失败。请检查 LDAP 服务器状态。`,ldapAlreadyProvisioned:`已创建`,ldapSelectedLabel:`已选`,ldapProvision:`创建用户`,ldapProvisioning:`创建中...`,ldapErrorProvision:`创建失败。请检查 LDAP 服务器状态后重试。`},form:{username:`用户名`,usernamePlaceholder:`输入用户名`,email:`邮箱`,emailPlaceholder:`user@example.com`,password:`密码`,passwordPlaceholder:`输入密码`,confirmPassword:`确认密码`,confirmPasswordPlaceholder:`确认密码`,newPasswordPlaceholder:`输入新密码`,confirmNewPasswordPlaceholder:`确认新密码`,leaveBlankToKeep:`留空以保持当前值`,groups:`组`,optional:`可选`,autoGeneratedPassword:`将自动生成安全密码并通过邮件发送给用户。`,passwordManagedByAdvancedAuth:`密码由高级认证管理。使用"重置密码"通过邮件向用户发送新密码。`,resetPassword:`重置密码`,resettingPassword:`重置密码中...`},deleteModal:{title:`删除用户`,message:`确定要删除此用户吗？此操作无法撤销。`,confirm:`删除用户`}},streamOverlay:{title:`流叠加层`,invalidPrinterId:`无效的打印机 ID`,cameraStream:`摄像头流`,progress:`进度`,eta:`预计完成时间`,printerIdle:`打印机空闲`,printerOffline:`打印机离线`,builder:{title:`直播叠加层`,description:`生成直播叠加层的网址：全屏摄像头画面上叠加实时打印信息，可用于 OBS、墙面显示屏或任何浏览器源。选择需要的字段并复制网址。`,printer:`打印机`,size:`文字大小`,sizeSmall:`小`,sizeMedium:`中`,sizeLarge:`大`,fps:`帧率`,fpsHint:`无论设置多少，A1 和 P1 的摄像头最高约为每秒 5 帧。`,token:`直播叠加层令牌（可选）`,tokenHint:`仅在启用登录时需要：OBS 没有自己的登录会话。请在上方以直播叠加层范围创建一个。`,tokenWarning:`此网址包含令牌：任何能看到它的人都可以观看画面并看到文件名。撤销令牌即可切断访问。`,fields:`要显示的字段`,fieldPrinter:`打印机名称`,fieldFilename:`文件名`,fieldStatus:`状态`,fieldProgress:`进度条`,fieldLayers:`层数`,fieldEta:`剩余时间和预计完成时间`,fieldCamera:`摄像头画面`,chamberHint:`仅在配有真实腔体传感器的机型上显示腔体温度：P1 和 A1 上报的数值没有意义，因此不显示。`,urlTitle:`叠加层网址`,open:`打开`,showPreview:`显示预览`,hidePreview:`隐藏预览`,previewTitle:`叠加层预览`},status:{printing:`打印中`,paused:`已暂停`,finished:`已完成`,failed:`失败`,idle:`空闲`,unknown:`未知`}},profiles:{title:`配置文件`,subtitle:`管理您的切片预设和压力推进校准`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`本地配置文件`,kprofiles:`K 值配置`},orcaCloud:{connectedAs:`已连接`,connectedShort:`已连接到 Orca Cloud`,logout:`断开连接`,noLogoutPermission:`您没有断开连接的权限`,noConnectPermission:`您没有连接到 Orca Cloud 的权限`,retry:`重试`,connectButton:`连接 Orca Cloud`,connect:{title:`连接到 Orca Cloud`,description:`登录您的 Orca Cloud 账户,将切片机配置同步到 Bambuddy。`},device:{title:`在 Orca Cloud 中批准 Bambuddy`,instruction:`打开 Orca Cloud 并批准此代码。批准后 Bambuddy 会自动连接。`,codeLabel:`您的配对代码`,openButton:`打开 Orca Cloud 批准页面`,manualHint:`或前往 {{url}} 并输入上方的代码。`,waiting:`正在等待您批准…`,cancel:`取消`},profiles:{title:`您的 Orca Cloud 配置文件 ({{count}})`,refresh:`刷新`,empty:`您的 Orca Cloud 账户中尚无配置文件。`},toast:{disconnected:`已从 Orca Cloud 断开连接`},errors:{startFailed:`无法启动 Orca Cloud 登录流程。`,denied:`配对在 Orca Cloud 中被拒绝。`,expired:`配对代码已过期。请点击"连接"重试。`,pollFailed:`等待批准时连接中断。请重试。`}},localProfiles:{title:`本地配置文件`,subtitle:`从 OrcaSlicer 导入和管理切片预设`,import:`导入配置文件`,importDesc:`将 .bbscfg、.bbsflmt、.orca_filament、.zip 或 .json 文件拖放到此处`,importing:`导入中...`,search:`搜索本地预设...`,noPresets:`暂无本地预设`,noSearchResults:`没有与搜索匹配的预设`,badge:`本地`,edit:`编辑`,delete:`删除`,cancel:`取消`,deleteConfirmTitle:`删除预设`,deleteConfirm:`确定要删除此预设吗？此操作无法撤销。`,source:`来源`,inheritsFrom:`继承自`,filamentType:`类型`,vendor:`厂商`,compatiblePrinters:`兼容打印机`,nozzleTemp:`喷嘴温度`,cost:`成本`,density:`密度`,pressureAdvance:`压力推进`,filament:`耗材`,process:`工艺`,printer:`打印机`,toast:{importSuccess:`已导入 {{count}} 个预设`,importSkipped:`跳过 {{count}} 个预设（重复）`,importError:`导入时出现 {{count}} 个错误`,deleted:`预设已删除`,updated:`预设已更新`}},connectedAs:`已连接为`,signInExpiredTitle:`Bambu Cloud 登录已过期`,signInExpiredBody:`Bambu Lab 不再接受已保存的令牌。请重新登录以恢复云配置文件、MakerWorld 导入和固件检查。`,logout:`退出登录`,noLogoutPermission:`您没有退出登录的权限`,failedToLoad:`加载配置文件失败`,retry:`重试`,time:{justNow:`刚刚`,minsAgo:`{{count}} 分钟前`,hoursAgo:`{{count}} 小时前`,daysAgo:`{{count}} 天前`},toast:{loggedOut:`已退出登录`},login:{title:`连接到拓竹云`,subtitle:`跨设备同步您的切片预设`,email:`邮箱`,password:`密码`,region:`地区`,regionGlobal:`全球`,regionChina:`中国`,verificationCode:`验证码`,totpCode:`验证器代码`,checkEmail:`检查您的邮箱 ({{email}}) 获取 6 位验证码`,enterTotpHint:`输入验证器应用中的 6 位代码`,accessToken:`访问令牌`,accessTokenHint:`粘贴您的拓竹云访问令牌。中国大陆账号（绑定手机号、无邮箱登录）只能使用此方式登录。可从 MakerWorld 浏览器 Cookie 中获取令牌，详见 Wiki。`,back:`返回`,loginButton:`登录`,verifyButton:`验证`,setTokenButton:`设置令牌`,useToken:`改用访问令牌`,captchaTitle:`Bambu Cloud 要求进行 CAPTCHA 验证`,captchaBody:`Bambu 在接受登录之前要求你的网络通过 CAPTCHA 验证，而该验证无法在 Bambuddy 中完成。这与你的邮箱和密码无关。限制与你的公网 IP 地址绑定，通常几小时后会自动解除；反复重试只会延长限制。若要立即登录，请改用从浏览器会话中获取的访问令牌。`,useEmail:`改用邮箱登录`,toast:{loggedIn:`登录成功`,codeSent:`验证码已发送到您的邮箱`,enterTotp:`输入验证器应用中的代码`,tokenSet:`令牌设置成功`}},presets:{myPreset:`我的预设（可编辑）`,duplicate:`复制`,editable:`可编辑`,failedToLoadDetails:`加载预设详情失败`,deleteConfirm:`删除此预设？`,deleteWarning:`这将从拓竹云中永久删除"{{name}}"。此操作无法撤销。`,noDuplicatePermission:`您没有复制预设的权限`,noEditPermission:`您没有编辑预设的权限`,noDeletePermission:`您没有删除预设的权限`,types:{filament:`耗材预设`,printer:`打印机预设`,process:`工艺预设`},toast:{deleted:`预设已删除`,created:`预设已创建`,updated:`预设已更新`,duplicated:`预设已复制`,fieldAdded:`字段"{{key}}"已添加`,exported:`预设已导出`},baseLabel:`基础：{{name}}`,currentLabel:`当前：{{name}}`,newPreset:`新建预设`,editPreset:`编辑预设`,duplicatePreset:`复制预设`,createNewPreset:`创建新预设`,customizeSettings:`自定义新预设的设置`,compareWithBase:`与基础预设比较`,compare:`比较`,basePreset:`基础预设`,selectBasePreset:`选择基础预设...`,presetName:`预设名称`,myCustomPreset:`我的自定义预设`,inheritsFrom:`继承自`,dropJsonToImport:`拖放 JSON 以导入`,tabs:{common:`常用`,allFields:`所有字段`},availableFields:`可用字段`,searchFieldsPlaceholder:`搜索字段...`,noMatchingFields:`没有匹配的字段`,allFieldsAdded:`所有字段已添加`,addCustomField:`添加自定义字段`,yourOverrides:`您的覆盖值`,noOverridesYet:`暂无覆盖值`,clickFieldsToAdd:`点击左侧的字段进行添加`,saveAsTemplate:`保存为模板`,jsonTip:`提示：将 .json 文件拖放到此对话框的任意位置以导入设置`},cloudView:{searchPlaceholder:`搜索预设...`,templates:`模板`,refresh:`刷新`,newPreset:`新建预设`,clearFilters:`清除筛选`,compareMode:`比较模式`,selectAnotherPreset:`选择另一个 {{type}} 预设`,clickTwoPresets:`点击两个相同类型的预设进行比较`,selectFirst:`1. 选择第一个`,selectSecond:`2. 选择第二个`,compareNow:`立即比较`,lastSynced:`上次同步：`,showingCount:`显示 {{showing}} / {{total}} 个预设`,noPresetsFound:`未找到预设`,columns:{filament:`耗材`,process:`工艺`,printer:`打印机`},noFilamentPresets:`无耗材预设`,noProcessPresets:`无工艺预设`,noPrinterPresets:`无打印机预设`,filters:{type:`类型`,owner:`所有者`,printer:`打印机`,nozzle:`喷嘴`,filament:`耗材`,layer:`层`,all:`全部`,myPresets:`我的预设`,builtIn:`内置`,process:`工艺`},noTemplatesPermission:`您没有管理模板的权限`,noRefreshPermission:`您没有刷新配置文件的权限`,noCreatePermission:`您没有创建预设的权限`},templates:{title:`快速模板`,noTemplates:`暂无模板`,createFirst:`从预设编辑器创建模板`,typeFilter:`类型：`,deleteTitle:`删除模板`,deleteWarning:`此操作无法撤销`,deleteConfirm:`确定要删除"{{name}}"吗？`,namePlaceholder:`模板名称`,descriptionPlaceholder:`描述`,settingsJson:`设置 (JSON)`,fieldsCount:`{{count}} 个字段`,shownInModals:`在对话框中显示`,hiddenInModals:`在对话框中隐藏`,apply:`应用`,toast:{deleted:`模板已删除`,updated:`模板已更新`,created:`模板已创建`,applied:`模板已应用`}}},support:{debugLoggingActive:`调试日志记录已激活`,manageLogs:`管理`,collectItem7:`打印机连接和固件版本`,collectItem8:`集成状态（Spoolman、MQTT、HA）`,collectItem9:`网络接口（仅子网）`,collectItem10:`Python 包版本`,collectItem11:`数据库健康检查`,collectItem12:`Docker 环境详情`,bundleGenerating:`正在生成包...`,bundleStepConnection:`正在执行打印机连接性检查`,bundleStepVirtualPrinters:`正在执行虚拟打印机设置检查`,bundleStepLogScan:`正在扫描最近的日志以查找已知问题`,bundleStepBuild:`正在构建支持包 ZIP 文件`},fileManager:{variants:{badge:`{{count}} 个版本`,groupAction:`归为版本组`,groupTooltip:`将这些文件标记为针对不同打印机切片的同一任务`,grouped:`已将 {{count}} 个文件归为版本组`,printAlternatives:`打印（{{count}} 个备选）`},title:`文件管理器`,subtitle:`组织和管理您的打印文件`,uploadFiles:`上传文件`,newFolder:`新建文件夹`,folderName:`文件夹名称`,folderNamePlaceholder:`例如：功能零件`,renameFile:`重命名文件`,renameFolder:`重命名文件夹`,invalidFilenameChar:`打印文件名中不允许使用字符 "{{char}}"。打印机 SD 卡拒绝以下字符: < > : " / \\ | ? *`,moveFiles:`移动 {{count}} 个文件`,rootNoFolder:`根目录（无文件夹）`,current:`当前`,linkFolder:`链接文件夹`,linkFolderDescription:`将"{{name}}"链接到项目或归档以便快速访问。`,project:`项目`,archive:`归档`,noProjectsFound:`未找到项目`,noArchivesFound:`未找到归档`,unlink:`取消链接`,link:`链接`,dragDropFiles:`将文件拖放到此处`,dropFilesHere:`将文件放在此处`,releaseToUpload:`释放以上传`,orClickToBrowse:`或点击浏览`,allFileTypesSupported:`支持所有文件类型。ZIP 文件将被解压。`,zipFilesDetected:`检测到 ZIP 文件`,zipExtractOptions:`ZIP 文件将被解压。选择如何处理文件夹结构：`,preserveZipStructure:`保留 ZIP 中的文件夹结构`,createFolderFromZip:`从 ZIP 文件名创建文件夹`,stlThumbnailGeneration:`STL 缩略图生成`,zipMayContainStl:`ZIP 文件可能包含 STL 文件。可以在解压时生成缩略图。`,thumbnailsCanBeGenerated:`可以为 STL 文件生成缩略图。大型模型可能需要更长时间处理。`,generateThumbnailsForStl:`为 STL 文件生成缩略图`,threemfDetected:`检测到 3MF 文件`,threemfExtractionInfo:`将自动从 3MF 文件中提取打印机型号、材料、颜色和打印设置。`,willBeExtracted:`将被解压`,filesExtracted:`已解压 {{count}} 个文件`,uploadComplete:`上传完成：{{succeeded}} 个成功`,uploadFailed:`上传失败`,zipFilesFailed:`{{count}} 个文件失败`,uploading:`上传中...`,changeLink:`更改链接...`,linkTo:`链接到...`,linkToProjectOrArchive:`链接到项目或归档`,generateThumbnail:`生成缩略图`,generateThumbnails:`生成缩略图`,generateThumbnailsForMissing:`为缺少缩略图的 STL 文件生成缩略图`,gridView:`网格视图`,listView:`列表视图`,lowDiskSpaceWarning:`磁盘空间不足警告`,lowDiskSpaceDetails:`仅剩 {{free}}（总共 {{total}}）。阈值设置为 {{threshold}} GB。`,files:`文件`,folders:`文件夹`,size:`大小`,free:`剩余`,allFiles:`所有文件`,allExternal:`外部`,externalIsEmpty:`没有外部文件`,externalEmptyDescription:`关联的外部文件夹中的文件将在此显示。`,wrap:`换行`,enableTextWrapping:`启用文本换行`,disableTextWrapping:`禁用文本换行`,collapse:`折叠`,collapseFoldersByDefault:`默认折叠文件夹`,expandFoldersByDefault:`默认展开文件夹`,folderSort:`文件夹排序`,folderSortByName:`按名称`,folderSortByActivity:`按最近活动`,dragToResizeTooltip:`拖动调整大小，双击重置`,searchFiles:`搜索文件...`,searchSubfoldersHint:`包含子文件夹`,readme:{truncated:`已截断`,show:`显示 README`,hide:`隐藏 README`,label:`README`},tags:{title:`标签`,subtitle:`为文件添加跨目录的标签 —— 玩具、儿童安全、仅 PETG 等等。`,manage:`标签`,manageTitle:`管理标签目录`,add:`新建标签`,edit:`重命名标签`,name:`名称`,fileCount:`文件数`,empty:`还没有标签。创建一个开始为文件加标签吧。`,noMatches:`没有匹配的标签。`,createPlaceholder:`例：玩具、儿童安全、petg`,createButton:`创建`,nameRequired:`名称是必填项。`,searchPlaceholder:`过滤标签…`,created:`已创建标签。`,updated:`已重命名标签。`,deleted:`已删除标签。`,saveFailed:`无法保存标签。`,deleteFailed:`无法删除标签。`,applyFailed:`无法应用标签。`,applyAdd:`添加标签`,applyRemove:`移除标签`,applyAddSuccess:`已为 {{files}} 个文件添加 {{count}} 个标签。`,applyRemoveSuccess:`已从 {{files}} 个文件移除 {{count}} 个标签。`,actionAdd:`添加到所选文件`,actionRemove:`从所选文件移除`,tagAction:`标签`,bulkTitle:`为所选的 {{count}} 个文件加标签`,bulkTooltip:`在每个所选文件上添加或移除标签。`,noPermission:`您没有为文件加标签的权限。`,filterLabel:`筛选条件：`,clearAll:`全部清除`,confirmDelete:`删除标签 "{{name}}"？`,confirmDeleteMessage:`此操作会从目录中删除该标签。文件保留其它标签。`,confirmDeleteInUseMessage:`此标签存在于 {{count}} 个文件上。删除后所有文件上的标签都会消失，但文件本身不会动。`,editAria:`编辑 {{name}}`,deleteAria:`删除 {{name}}`},allTypes:`所有类型`,prints:`打印`,ascending:`升序`,descending:`降序`,showModified:`显示修改日期`,hideModified:`隐藏修改日期`,lastModified:`最后修改`,lastActivity:`最近活动`,resultsCount:`{{showing}} / {{total}} 个文件`,selectAll:`全选`,deselectAll:`取消全选`,selected:`已选择 {{count}} 个`,adding:`添加中...`,loadingFiles:`加载文件中...`,folderIsEmpty:`文件夹为空`,noFilesYet:`暂无文件`,folderEmptyDescription:`上传文件或将文件移入此文件夹以开始使用。`,noFilesDescription:`上传文件以开始组织您的打印相关文件。`,noMatchingFiles:`没有匹配的文件`,noMatchingFilesDescription:`没有文件匹配您当前的搜索或筛选条件。`,clearFilters:`清除筛选`,printedCount:`已打印 {{count}} 次`,uploadedBy:`上传者`,deleteFolder:`删除文件夹`,deleteFile:`删除文件`,deleteFilesCount:`删除 {{count}} 个文件`,deleteFolderConfirm:`确定要删除此文件夹吗？其中的所有文件也将被删除。`,deleteFileConfirm:`确定要删除此文件吗？`,deleteFilesConfirm:`确定要删除 {{count}} 个选中的文件吗？此操作无法撤销。`,deleting:`删除中...`,noPermissionRenameFolder:`您没有重命名文件夹的权限`,noPermissionLinkFolder:`您没有链接文件夹的权限`,noPermissionDeleteFolder:`您没有删除文件夹的权限`,onlyEmptyFoldersDeletable:`您只能删除空文件夹`,noPermissionPrint:`您没有打印的权限`,noPermissionSlice:`您没有切片文件的权限`,noPermissionAddToQueue:`您没有添加到队列的权限`,noPermissionDownload:`您没有下载文件的权限`,noPermissionPreview:`您没有预览文件的权限`,preview3d:`3D 预览`,noPermissionRenameFile:`您没有重命名此文件的权限`,noPermissionGenerateThumbnail:`您没有生成缩略图的权限`,noPermissionDeleteFile:`您没有删除此文件的权限`,noPermissionCreateFolder:`您没有创建文件夹的权限`,noPermissionUpload:`您没有上传文件的权限`,noPermissionMoveFiles:`您没有移动文件的权限`,noPermissionDeleteFiles:`您没有删除文件的权限`,linkExternal:`链接外部`,linkExternalFolder:`链接外部文件夹`,linkExternalFolderDescription:`将主机目录（NAS、USB、网络共享）挂载到文件管理器中。文件不会被复制——直接从原始路径访问。`,externalFolderNamePlaceholder:`例如：NAS打印文件`,externalPath:`主机路径`,externalPathHelp:`Docker主机上目录的绝对路径。必须以绑定挂载方式挂载到容器中。`,readOnly:`只读`,readOnlyHelp:`防止上传和删除`,showHiddenFiles:`显示隐藏文件（点文件）`,externalFolder:`外部文件夹`,scanFolder:`扫描`,toast:{folderCreated:`文件夹已创建`,openInSlicerFailed:`无法在切片软件中打开`,folderDeleted:`文件夹已删除`,fileDeleted:`文件已删除`,filesDeleted:`已删除 {{count}} 个文件`,filesMoved:`文件已移动`,folderLinked:`文件夹已链接`,folderUnlinked:`文件夹已取消链接`,externalFolderLinked:`外部文件夹已链接并扫描`,folderScanned:`扫描完成：添加 {{added}} 个，移除 {{removed}} 个`,addedToQueue:`已将 {{count}} 个文件添加到队列`,addedToQueuePartial:`已添加 {{added}} 个文件，{{failed}} 个失败`,failedToAddToQueue:`添加文件失败：{{error}}`,fileRenamed:`文件已重命名`,folderRenamed:`文件夹已重命名`,thumbnailsGenerated:`已生成 {{count}} 个缩略图`,thumbnailsGeneratedPartial:`已生成 {{succeeded}} 个缩略图，{{failed}} 个失败`,noStlMissingThumbnails:`没有缺少缩略图的 STL 文件`,failedToGenerateThumbnails:`生成缩略图失败：{{error}}`,thumbnailGenerated:`缩略图已生成`,failedToGenerateThumbnail:`生成缩略图失败：{{error}}`}},projects:{parentLabel:`父项目`,parentNone:`无（顶级项目）`,parentHint:`将此项目嵌套在另一个项目下，其数据将汇总到主项目中`,partOf:`属于 {{name}}`,subProjectCount:`{{count}} 个子项目`,subProjectsOf:`{{name}} 的子项目`,collapseSubProjects:`折叠子项目`,expandSubProjects:`展开子项目`,title:`项目`,subtitle:`组织和跟踪您的 3D 打印项目`,newProject:`新建项目`,editProject:`编辑项目`,deleteProject:`删除项目`,projectName:`项目名称`,description:`描述`,noProjects:`暂无项目`,noProjectsFiltered:`没有{{status}}项目`,noProjectsFilteredHelp:`您没有任何{{status}}项目。当项目状态更改时，它们将出现在这里。`,createFirst:`创建您的第一个项目以开始组织相关打印、跟踪进度和管理构建。`,createFirstButton:`创建您的第一个项目`,create:`创建`,files:`文件`,prints:`打印`,plates:`板`,parts:`零件`,lastModified:`最后修改`,deleteConfirm:`确定要删除此项目吗？归档和队列项目将被取消链接但不会被删除。`,addFiles:`添加文件`,removeFile:`移除文件`,viewDetails:`查看详情`,namePlaceholder:`例如：Voron 2.4 构建`,descriptionPlaceholder:`可选描述...`,urlLabel:`网址`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`网址必须以 http:// 或 https:// 开头`,openExternalUrl:`打开项目网址`,coverImageLabel:`封面图片`,coverImageAlt:`项目封面图片`,coverImageUpload:`上传`,coverImageReplace:`替换`,coverImageRemove:`移除`,color:`颜色`,targetPlates:`目标板数`,targetPlatesPlaceholder:`例如：25`,targetPlatesHelp:`打印任务数量`,targetParts:`目标零件数`,targetPartsPlaceholder:`例如：150`,targetPartsHelp:`所需零件总数`,targetSets:`每个文件的份数`,targetSetsPlaceholder:`例如 10`,targetSetsHelp:`每个可打印文件需要打印的次数`,tagsLabel:`标签（逗号分隔）`,tagsPlaceholder:`例如：voron、功能件、礼物`,dueDate:`截止日期`,priority:`优先级`,priorityLow:`低`,priorityNormal:`普通`,priorityHigh:`高`,priorityUrgent:`紧急`,statusActive:`进行中`,statusCompleted:`已完成`,statusArchived:`已归档`,done:`完成`,completed:`已完成`,failed:`失败`,inQueue:`队列中`,noPrintsYet:`暂无打印`,printJobs:`打印任务（板）`,partsPrinted:`已打印零件`,failedParts:`失败零件`,import:`导入`,export:`导出`,importProject:`导入项目`,exportAll:`导出所有项目`,loading:`加载项目中...`,noEditPermission:`您没有编辑项目的权限`,noDeletePermission:`您没有删除项目的权限`,noCreatePermission:`您没有创建项目的权限`,noImportPermission:`您没有导入项目的权限`,noExportPermission:`您没有导出项目的权限`,toast:{created:`项目已创建`,updated:`项目已更新`,deleted:`项目已删除`,imported:`项目已导入`,multipleImported:`已导入 {{count}} 个项目`,importFailed:`导入失败`,exported:`项目已导出（仅元数据）`}},projectDetail:{notFound:`未找到项目`,backToProjects:`返回项目`,export:`导出`,exportProject:`导出项目`,noExportPermission:`您没有导出项目的权限`,noEditPermission:`您没有编辑项目的权限`,partOf:`属于：`,priorityLabel:`优先级：`,noPrints:`此项目暂无打印`,status:{active:`进行中`,completed:`已完成`,archived:`已归档`},priority:{low:`低`,normal:`普通`,high:`高`,urgent:`紧急`},dueDate:{overdue:`已逾期`,today:`今天到期`,daysLeft:`还有 {{count}} 天`},progress:{platesProgress:`板进度`,partsProgress:`零件进度`,setsProgress:`完整套数`,sets:`套`,setsHint:`当每个可打印文件都达到此次数时，即完成一套`,printJobs:`打印任务`,parts:`零件`,percentComplete:`{{percent}}% 完成`,remaining:`剩余 {{count}} 个`},stats:{printJobs:`打印任务`,total:`总计`,failed:`{{count}} 个失败`,partsPrinted:`已打印 {{count}} 个零件`,printTime:`打印时间`,filamentUsed:`耗材用量`},cost:{title:`成本追踪`,filamentCost:`耗材成本`,energy:`能源`,totalCost:`总成本`,total:`总计`,includesBom:`含物料清单`,budget:`预算`,remaining:`剩余`},subProjects:{title:`子项目 ({{count}})`,jobs:`{{count}} 个任务`},rollup:{title:`包含 {{count}} 个子项目`,progress:`总体进度`,percentComplete:`已完成 {{percent}}%`},notes:{title:`备注`,noEditPermission:`您没有编辑备注的权限`,placeholder:`添加关于此项目的备注...`,empty:`暂无备注。点击编辑添加备注。`},files:{title:`文件`,linkFolders:`从文件管理器链接文件夹`,forQuickAccess:`到此项目以便快速访问。`,fileCount:`{{count}} 个文件`,empty:`未链接文件夹。前往文件管理器将文件夹链接到此项目。`,printedCount:`已打印 {{count}} 次`,progressTooltip:`已完成 {{done}}/{{target}} 次打印`,noFiles:`此文件夹中没有文件。`},bom:{title:`材料清单`,acquired:`已获取 {{completed}}/{{total}}`,showAll:`显示全部`,hideDone:`隐藏已完成`,addPart:`添加零件`,noAddPermission:`您没有添加零件的权限`,partNamePlaceholder:`零件名称（例如：M3x8 螺丝）`,partName:`零件名称`,qty:`数量`,price:`价格 ({{currency}})`,sourcingUrlPlaceholder:`采购链接（可选）`,remarksPlaceholder:`备注（可选）`,deletePart:`删除零件`,deleteConfirm:`确定要删除"{{name}}"吗？`,noUpdatePermission:`您没有更新零件的权限`,noEditPermission:`您没有编辑零件的权限`,noDeletePermission:`您没有删除零件的权限`,totalCost:`总成本：`,empty:`材料清单中没有零件。添加硬件、电子元件或其他组件以跟踪需要采购的物品。`},timeline:{title:`活动时间线`,empty:`暂无活动。`},template:{saveAsTemplate:`保存为模板`,noCreatePermission:`您没有创建模板的权限`},queue:{title:`队列`,viewAll:`查看全部`,printing:`{{count}} 个打印中`,queued:`{{count}} 个排队中`},prints:{title:`打印 ({{count}})`},toast:{projectUpdated:`项目已更新`,partAdded:`零件已添加`,partRemoved:`零件已移除`,exportFailed:`导出失败`,projectExported:`项目已导出`,templateCreated:`模板已创建`}},system:{title:`系统信息`,version:`版本`,uptime:`运行时间`,cpuUsage:`CPU 使用率`,memoryUsage:`内存使用率`,diskUsage:`磁盘使用率`,networkInfo:`网络信息`,logs:`日志`,debugMode:`调试模式`,enableDebug:`启用调试日志`,disableDebug:`禁用调试日志`,downloadLogs:`下载日志`,clearLogs:`清除日志`,dockerInfo:`Docker 信息`,containerName:`容器名称`,imageName:`镜像名称`,platform:`平台`,architecture:`架构`},sponsors:{sectionTitle:`独立运营·社区支持`,tagline:`Bambuddy 完全免费，并将持续免费——这要感谢主动支持的用户。没有风投，也没有云端绑定。`,viewSupporters:`查看支持者`,toastPrints:`你已经用 Bambuddy 完成了 {{count}} 次打印。Bambuddy 之所以免费，离不开支持者。`,toastCost:`你已经用 Bambuddy 追踪了 {{total}} 的耗材。看看是谁让项目保持独立。`,toastArchives:`用 Bambuddy 归档了 {{count}} 次打印。看看是谁让它保持独立。`,toastAnniversary:`与 Bambuddy 相伴一年了！看看是谁让项目保持独立。`,toastVersionUpdate:`已更新至 v{{version}}。Bambuddy 之所以免费，离不开支持者。`,toastBusiness:`您正在 {{count}} 台打印机上运行 Bambuddy？我们为团队提供支持方案：优先修复、开具发票，以及与维护者的直接沟通渠道。`,businessCta:`Bambuddy 商业版`,businessTitle:`Bambuddy 商业版`,businessTagline:`您正在管理 {{count}} 台打印机。我们为团队和打印农场提供优先支持、商业授权和发票开具。`},library:{title:`耗材库`,addFilament:`添加耗材`,editFilament:`编辑耗材`,deleteFilament:`删除耗材`,vendor:`厂商`,material:`材料`,color:`颜色`,kFactor:`K 值`,temperature:`温度`,noFilaments:`耗材库中没有耗材`,deleteConfirm:`确定要删除此耗材吗？`,importFromPrinter:`从打印机导入`,exportToFile:`导出到文件`,runWithPipeline:{actionLabel:`用流水线运行`,noPermission:`您没有运行流水线的权限`,modalTitle:`用流水线运行`,confirmTitle:`确认运行`,confirmIntro:`预检发现此次运行存在问题`,sourceHint:`来源`,pipelineHint:`流水线`,targetHint:`目标`,pipelineListAria:`可用流水线`,runAnyway:`仍然运行`,loading:`加载中…`,empty:`尚未保存流水线。请打开切片对话框并点击"另存为流水线"创建一个。`,noTarget:`未设置目标打印机`,noTargetMessage:`此流水线没有目标打印机。请在设置中打开并选择一个。`,copies:`副本数`,copiesHint:`最多 {{n}}`,classTarget:`任意 {{model}}`,toast:{started:`流水线运行已开始`,failed:`无法启动运行`},issue:{printerNotSet:`此流水线未设置目标打印机。`,printerNotFound:`目标打印机已不存在。`,printerDisabled:`目标打印机已禁用。`,printerOffline:`目标打印机已离线。`,filamentType:`耗材槽 {{slot}}：期望 {{expected}}，AMS 实际 {{actual}}`,filamentColor:`耗材槽 {{slot}}：颜色不同（期望 {{expected}}，AMS 实际 {{actual}}）`,amsSlotMissing:`此打印机上没有 AMS 槽 {{slot}}`,filamentUnverified:`耗材槽 {{slot}} 来自云端 / 标准预设，无法静态验证。`,noClassMatches:`此安装中没有匹配该流水线目标型号类别（{{expected}}）的打印机。`,classNotSet:`流水线目标设置为打印机类别但未选择型号。`}}},slicerSettings:{presetValuesOutdatedSidecar:`当前显示切片器默认值：切片 sidecar 版本早于此功能，无法提供预设的实际值。更新 sidecar 镜像即可查看。未改动的项目仍使用预设。`,presetValuesNotConfigured:`当前显示切片器默认值：未配置切片 sidecar，无法读取预设的实际值。未改动的项目仍使用预设。`,presetValuesSidecarUnavailable:`当前显示切片器默认值：切片 sidecar 未响应，无法读取预设的实际值。未改动的项目仍使用预设。`,presetValuesUnavailable:`当前显示切片器默认值：无法读取所选预设的实际值。未改动的项目仍使用预设。`,filamentDefault:`默认`,fromFile:`来自文件`,fromFileHint:`设计者在源文件中修改了此项，其值为 {{value}}。`,fromFilePrinterCoupled:`设计者的打印机`,fromFilePrinterCoupledHint:`针对该文件设计时所用的打印机调校，在你的打印机上可能不正确或超出范围。`,fromFileOverridesPreset:`覆盖预设`,fromFileOverridesPresetHint:`文件将其设为 {{value}}，而所选预设使用 {{preset}}。仅当应以文件为准时才勾选。`,useFromFile:`对 {{option}} 使用源文件中的值`,otherFromFile:`此文件中的其他设置`,fromFileSummary:`设计者在此文件中改动了 {{count}} 项工艺设置。只有你勾选的才会生效。`,fromFileUseAll:`使用设计者的设置`,fromFileUseAllHint:`勾选可跨打印机通用的设置。针对设计者自己打印机调校的，以及决定你所选预设的那些，保持不勾选。`,fromFileClear:`清除 {{count}} 项`,loading:`正在加载切片设置…`,mode:{simple:`简单`,advanced:`高级`,expert:`专家`},searchPlaceholder:`搜索设置`,resetAll:`重置 {{count}} 项`,resetOption:`恢复默认值`,noMatches:`没有与搜索匹配的设置。`},slice:{filamentSlotUnset:`未设置`,processSettingsEmbedded:`启用“使用文件内置设置”时不生效——本次切片由文件自身的设置决定。`,processSettingsInactive:`未启用`,presetsHidden:`已隐藏 {{count}} 项`,showAllPresets:`显示全部`,showFewerPresets:`显示较少`,processSettings:`工艺设置`,processSettingsHint:`为本次切片调整所选预设。未改动的项目仍按预设定义。`,processSettingsChanged:`已更改 {{count}} 项`,processSettingsUnchanged:`预设默认值`,title:`切片模型`,action:`切片`,actionAll:`切片全部 {{count}} 个盘面`,actionAllTitle:`将所有盘面切片为单个多盘面输出（一个归档）。耗材选择覆盖项目定义的每个槽位。`,allPlatesToggle:`切片全部 {{count}} 个盘面`,slicing:`切片中…`,printer:`打印机配置`,process:`工艺配置`,filament:`耗材配置`,filamentSlot:`耗材 {{index}}（{{type}}）`,filamentColour:`耗材颜色`,selectPreset:`— 选择预设 —`,loadingPresets:`加载预设中…`,analyzingPlateFilaments:`分析打印板耗材中…`,analyzingPlateFilamentsHint:`正在运行预览切片以发现此打印板使用的 AMS 插槽。之后会缓存 — 重新打开是即时的。`,previewToast:`分析 {{name}} — {{elapsed}}`,previewWithProgress:`分析 {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— 此打印板未使用`,noPresetsForSlot:`无可用预设`,otherPrinters:`其他打印机`,presetsLoadFailed:`加载预设失败。请先打开设置 → 配置文件以导入。`,refreshPresets:`刷新`,refreshPresetsTitle:`刷新预设 — 获取最新的云端和打包配置列表（在 Bambu Studio 或 Bambu Handy 中删除预设后使用）`,allPresetsRequired:`必须选择所有预设`,useEmbedded:`使用文件的内置设置`,useEmbeddedHint:`按设计者的设置（壁、填充、耗材）切片，而非上方的配置文件。因您的打印机与文件匹配而可用。`,autoOrient:`自动摆正模型`,autoOrientHint:`切片前由切片器把每个模型转到最适合打印的一面，会覆盖文件中保存的朝向。`,autoArrange:`自动排布在热床上`,autoArrangeHint:`由切片器重新摆放模型，使其不再重叠，会替换文件自带的布局。`,enqueuing:`提交切片任务中…`,queued:`已排队…`,failed:`切片失败。请检查切片器 sidecar 日志。`,startedToast:`在后台切片 {{name}}…`,queuedToast:`已排队：{{name}} — {{elapsed}}`,runningToast:`切片 {{name}} — {{elapsed}}`,runningWithProgress:`{{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,runningWithProgressMultiPlate:`盘面 {{plateIndex}} / {{plateCount}} • {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,completedToast:`已切片 {{name}}`,externalWriteFallbackToast:`已保存到内部库：无法写入外部文件夹`,failedTitle:`切片失败`,failedToast:`切片 {{name}} 失败：{{detail}}`,tier:{local:`已导入`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`标准`},cloud:{notAuthenticated:`登录 Bambu Cloud（设置 → 配置文件 → Bambu Cloud）以查看云端预设。`,expired:`Bambu Cloud 会话已过期 — 请重新登录以刷新云端预设。`,unreachable:`目前无法访问 Bambu Cloud。本地和标准预设仍可使用。`},orcaCloud:{notAuthenticated:`登录 Orca Cloud（配置文件 → Orca Cloud）以查看您的 Orca 预设。`,expired:`Orca Cloud 会话已过期 — 请重新登录以刷新您的 Orca 预设。`,unreachable:`Orca Cloud 当前无法访问。其他预设仍可正常使用。`},bedType:{label:`打印板`,auto:`自动（使用工艺预设）`,coolPlate:`冷板`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`},pipelines:{label:`流水线`,applyAria:`应用流水线`,applyPrompt:`应用流水线…`,empty:`无已保存流水线`,saveButton:`另存为流水线`,saveTitle:`将当前四个槽位的选择保存为可复用流水线`,namePlaceholder:`流水线名称`,nameAria:`新流水线名称`,toast:{applied:`已应用 "{{name}}"`,saved:`流水线已保存`,saveFailed:`保存失败`}}},spoolman:{title:`Spoolman 集成`,enabled:`Spoolman 已启用`,url:`Spoolman URL`,connected:`已连接`,disconnected:`未连接`,testConnection:`测试连接`,sync:`同步`,syncing:`同步中...`,lastSync:`上次同步`,linkToSpoolman:`链接到 Spoolman`,openInSpoolman:`在 Spoolman 中打开`,unlinkSpool:`取消链接耗材`,unlinkConfirmTitle:`取消分配料盘？`,unlinkConfirmMessage:`这将从此插槽中移除料盘。料盘本身的数据将保持不变。`,selectSpool:`选择耗材`,noUnlinkedSpools:`无未分配的料盘`,linkSuccess:`料盘分配成功`,linkFailed:`料盘分配失败`,unlinkSuccess:`料盘取消分配成功`,unlinkFailed:`料盘取消分配失败`,linkedSpool:`已分配料盘`,spoolId:`耗材 ID`,fillSourceLabel:`(Spoolman)`,weight:`重量`,remaining:`剩余`,disableWeightSync:`禁用 AMS 估计重量同步`,disableWeightSyncDesc:`不从 AMS 估计值更新剩余容量。如果您更喜欢 Spoolman 的用量追踪而非 AMS 百分比估计，请使用此选项。新耗材仍将使用 AMS 估计值作为初始重量。`,reportPartialUsage:`报告失败打印的部分用量`,reportPartialUsageDesc:`当打印失败或被取消时，根据层进度报告估计的耗材使用量。`},locations:{title:`存储位置`,subtitle:`管理货架、抽屉等线轴物理存放位置`,add:`添加位置`,addShort:`添加`,edit:`编辑位置`,name:`名称`,spools:`线轴`,sensors:`传感器`,empty:`尚无存储位置。创建第一个货架或抽屉。`,manage:`位置`,createPlaceholder:`例如：A 架、抽屉 1`,nameRequired:`位置名称为必填项`,created:`位置已创建`,updated:`位置已更新`,deleted:`位置已删除`,saveFailed:`保存位置失败`,deleteFailed:`删除位置失败`,deleteBlocked:`删除前请移走此位置上的所有线轴`,confirmDelete:`删除「{{name}}」？`,confirmDeleteMessage:`此位置将从目录中移除。请先移走线轴。`,confirmDeleteMessageWithSensors:`此位置将从目录中移除。请先移走线轴。关联的传感器也将被删除。`},inventory:{title:`耗材库存`,subtitle:`管理您的料盘`,addToInventory:`添加到库存`,addToInventoryPending:`正在添加...`,addToInventorySuccess:`料盘已添加到库存`,addToInventoryFailed:`添加料盘到库存失败`,unknownSpoolTitle:`检测到新耗材`,unknownSpoolMessage:`在 {{location}} 检测到带有未知 RFID 标签的料盘。是否立即添加到库存？`,unknownSpoolSlot:`槽位`,bulk:{selectAllVisible:`选择所有可见项`,selectRow:`选择行`,selectGroup:`选择组`,selectionCount:`已选 {{count}} 个`,edit:`编辑`,printLabels:`打印标签`,resetUsage:`重置使用量`,restore:`恢复`,archive:`归档`,delete:`删除`,clearSelection:`清除选择`,editTitle:`批量编辑料盘`,editSubtitle:`将应用于选中的 {{count}} 个料盘。仅更新勾选的字段。`,editHint:`在字段中输入即可标记为更新 — 仅发送已勾选的行。留空字段不会更改料盘（清空字段仅能在单个料盘中操作）。`,useCustom:`使用 "{{value}}"`,toggleField:`切换此字段的更新`,changeCount:`将更新 {{count}} 个字段。`,applyPending:`应用中...`,applyButton:`应用于 {{count}} 个料盘`,deleteTitle:`删除选中的料盘`,archiveTitle:`归档选中的料盘`,restoreTitle:`恢复选中的料盘`,resetUsageTitle:`重置选中料盘的使用量`,deleteMessage:`永久删除 {{count}} 个料盘？此操作无法撤销。`,archiveMessage:`归档 {{count}} 个料盘？以后可以恢复。`,restoreMessage:`恢复 {{count}} 个已归档的料盘？`,resetUsageMessage:`将 {{count}} 个料盘的"总消耗"计数器重置？剩余重量将被保留。`,updateSuccess:`已更新 {{count}} 个料盘`,updateFailed:`批量更新失败`,updatePartial:`已更新 {{ok}} 个，{{failed}} 个失败`,updateAllFailed:`{{count}} 个料盘更新全部失败 — 已保留选择以便重试`,deleteSuccess:`已删除 {{count}} 个料盘`,deleteFailed:`批量删除失败`,deletePartial:`已删除 {{ok}} 个，{{failed}} 个失败`,deleteAllFailed:`{{count}} 个料盘删除全部失败 — 已保留选择以便重试`,archiveSuccess:`已归档 {{count}} 个料盘`,archiveFailed:`批量归档失败`,archivePartial:`已归档 {{ok}} 个，{{failed}} 个失败`,archiveAllFailed:`{{count}} 个料盘归档全部失败 — 已保留选择以便重试`,restoreSuccess:`已恢复 {{count}} 个料盘`,restoreFailed:`批量恢复失败`,restorePartial:`已恢复 {{ok}} 个，{{failed}} 个失败`,restoreAllFailed:`{{count}} 个料盘恢复全部失败 — 已保留选择以便重试`,invalidHex:`请输入 6 位十六进制字符 (RRGGBB) 或 8 位 (RRGGBBAA)，否则该字段不会应用。`},spoolmanMixedContentTitle:`Spoolman 无法通过 HTTPS 加载 — 浏览器已阻止混合内容`,spoolmanMixedContentBody:`Bambuddy 通过您的反向代理以 HTTPS 提供服务，但您的 Spoolman 地址仍为 HTTP。出于安全考虑，浏览器会阻止混合内容，因此嵌入式 Spoolman 界面无法加载。Spoolman 也必须通过 HTTPS 访问。`,spoolmanMixedContentFixReverseProxy:`请将 Spoolman 置于与 Bambuddy 相同的反向代理（Traefik / Nginx / Caddy）之后并启用 HTTPS，然后在设置中将 Spoolman URL 更新为新的 HTTPS 地址。`,spoolmanMixedContentFixOpenNewTab:`作为变通方案，可在新标签页中通过 HTTP 打开 Spoolman — 混合内容规则仅适用于嵌入式框架，独立标签页仍可正常使用。`,spoolmanOpenInNewTab:`在新标签页中打开 Spoolman`,labels:{title:`打印线材标签`,selectedCount:`已选 {{count}} 项`,pickSpools:`选择要打印标签的线材：`,monochrome:`单色（黑白打印机）`,monochromeHint:`移除颜色色块并加宽文本`,startingPosition:`标签起始位置`,startingPositionRange:`仅适用于标签纸模板：L7160 支持 1–21；5160 支持 1–30。`,startingPositionInvalid:`请输入 1 到 {{capacity}} 之间的整数。`,startingPositionFirst:`从位置 1 开始打印。`,startingPositionSkipped:`第一张标签纸的位置 1 到 {{lastPosition}} 将留空。`,startingPositionRangeError:`此标签纸的起始位置必须在 1 到 {{capacity}} 之间。`,searchPlaceholder:`按名称、品牌或 #ID 搜索`,filterByMaterial:`材料：`,allMaterials:`全部`,selectVisible:`选择所有可见 ({{count}})`,deselectVisible:`取消选择可见`,clearAll:`全部清除`,noSpoolsToShow:`没有要显示的线材。请调整筛选条件后重试。`,noMatches:`没有线材符合当前搜索或筛选。`,printOne:`打印此线材的标签`,printLabels:`打印标签…`,bulkTitle:`从当前显示的 {{count}} 个线材中选择要打印标签的`,noSpoolsTitle:`没有要打标签的线材`,error:`无法生成标签：{{msg}}`,sortBy:{label:`排序：`,id:`按 ID`,color:`按颜色`},templates:{amsHolderSmall:{label:`AMS 支架 — 小 (74 × 33 mm)`,hint:`每页一个标签；适配 MakerWorld 模型 752566 (AMS 耗材标签支架) 中可打印的标签。`},amsHolderLarge:{label:`AMS 支架 — 大 (75 × 55 mm)`,hint:`每页一个标签；适配 AMS 耗材标签支架的卡片插入款。空间充足，可放置色板、品牌、材料、ID 与二维码。`},box40x30:{label:`盒标签 (40 × 30 mm)`,hint:`每页一张；常见的 DK/Brother 卷尺寸，适合给耗材袋和储物盒贴标签。`},box:{label:`Box label (62 × 29 mm)`,hint:`每页一个标签；适配 Brother PT/QL 和 Dymo 小标签。`},averyL7160:{label:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,hint:`欧洲规格纸张；每张 A4 页 21 个标签。`},avery5160:{label:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,hint:`美国规格纸张；每张 Letter 页 30 个标签。`}}},csv:{importButton:`导入 CSV`,exportButton:`导出 CSV`,modalTitle:`从 CSV 导入耗材`,selectFile:`选择 CSV 文件或拖放到此处`,dragHint:`表头：material（必填）、brand、subtype、color_name、rgba、…`,parsing:`正在读取文件…`,previewError:`无法读取 CSV 文件`,validCount:`{{count}} 个有效`,errorCount:`{{count}} 个错误`,skippedCount:`{{count}} 个跳过`,colRow:`行`,colStatus:`状态`,colColor:`颜色`,colorResolved:`已从目录填充颜色`,colorCrossMaterial:`颜色取自其他材料 — 目录中无精确匹配`,duplicateExisting:`已存在具有此材料、品牌和颜色的料卷 — 仍会作为新料卷导入`,spoolmanHint:`在 Spoolman 模式下，请使用 Spoolman 内置的 CSV 导入/导出。`,importValidRows:`导入 {{count}} 个有效行`,noValidRows:`没有有效行`,importing:`正在导入…`,importSuccess:`已导入 {{count}} 个耗材`,importError:`导入失败`,exportError:`导出失败`},addSpool:`添加耗材`,editSpool:`编辑耗材`,copySpool:`复制耗材`,material:`材料`,selectMaterial:`选择材料...`,subtype:`子类型`,brand:`品牌`,searchBrand:`搜索品牌...`,useCustomBrand:`使用"{{brand}}"`,useCustomMaterial:`使用自定义材料：{{material}}`,suggestedOptions:`推荐`,allOptions:`全部`,colorName:`颜色名称`,colorNamePlaceholder:`翡翠白、烈焰红...`,color:`颜色`,hexColor:`十六进制颜色`,pickColor:`选择自定义颜色`,labelWeight:`标签重量`,coreWeight:`空盘重量`,searchSpoolWeight:`搜索耗材重量...`,weightUsed:`已使用`,currentWeight:`剩余重量`,measuredWeight:`称量重量`,spoolName:`线轴`,costPerKg:`每公斤成本`,storageLocation:`存放位置`,temperature:`温度`,humidity:`湿度`,battery:`电池`,storageLocationPlaceholder:`例如：货架A，抽屉1`,openInInventory:`在库存中查看`,measuredWeightError:`称量重量必须在 {{min}}g 到 {{max}}g 之间。`,slicerFilament:`切片耗材`,slicerFilamentName:`切片预设名称`,slicerPreset:`切片预设`,searchPresets:`搜索耗材预设...`,selectedPreset:`已选择`,noPresetsFound:`未找到预设`,tempOverrides:`温度覆盖`,note:`备注`,notePlaceholder:`关于此耗材的任何备注...`,category:`类别`,categoryPlaceholder:`例如：生产、原型、客户A`,categoryNone:`未分类`,storageLocationNone:`未设置位置`,lowStockThresholdOverride:`低库存阈值（此料盘）`,lowStockThresholdOverrideHelp:`留空以使用全局阈值（{{global}}%）。`,clearRfid:`清除 RFID 标签`,rfidCleared:`RFID 标签已清除`,archive:`归档`,restore:`恢复`,noSpools:`暂无耗材。添加您的第一个耗材开始使用。`,noAvailableSpools:`没有可用的耗材。请先向库存中添加耗材，或从其他槽位取消分配一个耗材。`,kProfiles:`K 值配置`,addKProfile:`添加 K 值配置`,assignSpool:`分配耗材`,unassignSpool:`取消分配`,assignSuccess:`耗材已分配，AMS 槽位已配置`,assignPendingInsert:`已分配。插入耗材后将配置槽位。`,assignFailed:`分配耗材失败`,assignMismatchTitle:`材料不匹配`,assignMismatchMessage:`所选线轴材料 "{{spoolMaterial}}" 与 {{location}} 的料槽材料 "{{trayMaterial}}" 不匹配。仍要分配吗？`,assignMismatchConfirm:`仍然分配`,assignPartialMismatchMessage:`线轴材料 "{{spoolMaterial}}" 与 {{location}} 的 "{{trayMaterial}}" 相近但不完全一致。是否继续？`,assignProfileMismatchMessage:`线轴配置 "{{spoolProfile}}" 与 {{location}} 的料槽配置 "{{trayProfile}}" 不一致。是否继续？`,assignReconfigureNote:`AMS 槽位将重新配置为使用线轴的配置。`,selectSpool:`选择要分配到此槽位的耗材`,assigned:`已分配`,assigning:`分配中...`,searchSpools:`搜索耗材...`,showAllSpools:`显示所有耗材`,spoolmanSpools:`Spoolman 线轴`,allMaterials:`所有材料`,filterByBrand:`按品牌筛选...`,showArchived:`显示已归档`,quickAdd:`快速添加（库存）`,quantity:`数量`,stock:`库存`,configured:`已配置`,spoolsCreated:`已创建 {{count}} 个耗材`,spoolsPartiallyCreated:`已创建 {{created}} / {{total}} 个耗材（部分失败）`,spoolCreated:`耗材已创建`,spoolUpdated:`耗材已更新`,spoolDeleted:`耗材已删除`,deepLinkSpoolNotFound:`未找到耗材`,deepLinkFetchFailed:`无法加载耗材 — 请重试`,spoolArchived:`耗材已归档`,spoolRestored:`耗材已恢复`,kProfileSaveFailed:`K值配置文件设置无法保存`,syncWeightSpoolNotFound:`未找到耗材 — 可能已被删除`,syncWeightSpoolmanUnreachable:`Spoolman 无法访问 — 请稍后再试`,syncWeightFailed:`重量同步失败`,spoolmanUnreachable:`Spoolman 无法访问 — 请稍后再试`,deleteSpoolNotFound:`未找到耗材 — 可能已被删除`,deleteFailed:`删除耗材失败`,archiveSpoolNotFound:`未找到耗材 — 可能已被删除`,archiveFailed:`归档耗材失败`,restoreSpoolNotFound:`未找到耗材 — 可能已被删除`,restoreFailed:`恢复耗材失败`,saveFailed:`保存更改失败`,tagClearFailed:`清除标签失败`,deleteConfirm:`确定要删除此耗材吗？此操作无法撤销。`,archiveConfirm:`确定要归档此耗材吗？`,advancedSettings:`高级设置`,filamentInfoTab:`耗材信息`,paProfileTab:`PA 配置`,colorAndCostTab:`颜色与成本`,printersTab:`打印机`,filamentInfo:`耗材`,additional:`附加`,loadingPresets:`加载云端预设中...`,cloudConnected:`云端已连接`,cloudNotConnected:`云端未连接（使用默认值）`,recentColors:`最近`,searchColors:`搜索颜色...`,searchResults:`搜索结果`,allColors:`所有颜色`,commonColors:`常用颜色`,showLess:`显示更少`,showAll:`显示全部`,noColorsFound:`没有颜色匹配您的搜索`,noResults:`未找到匹配项`,extraColorsLabel:`附加颜色`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`粘贴 2 到 8 个十六进制色值,以逗号分隔。将渲染为渐变。`,extraColorsInvalid:`已忽略无效的十六进制值:{{tokens}}`,colorEffectLabel:`效果`,colorEffect:{none:`无`,sparkle:`闪光`,wood:`木纹`,marble:`大理石`,glow:`夜光`,matte:`哑光`,silk:`丝光`,galaxy:`星空`,rainbow:`彩虹`,metal:`金属`,translucent:`半透明`,gradient:`渐变`,dualColor:`双色`,triColor:`三色`,multicolor:`多色`},selectMaterialFirst:`请先在耗材信息选项卡中选择材料。`,noPrintersConfigured:`未配置打印机。添加打印机以使用 PA 配置。`,matchingFilter:`匹配`,anyBrand:`任何品牌`,anyVariant:`任何变体`,autoSelect:`自动选择`,matches:`匹配`,match:`匹配`,noMatches:`无匹配`,connected:`已连接`,offline:`离线`,printerOffline:`打印机离线。连接后查看校准配置。`,noKProfilesMatch:`没有 K 值配置匹配所选耗材。`,leftNozzle:`左喷嘴`,rightNozzle:`右喷嘴`,profilesSelected:`个校准配置已选择`,filamentPreset:`耗材预设`,presetUseSpoolDefault:`使用料卷的预设`,presetInherited:`继承`,presetOverride:`已覆盖`,presetNeedsModel:`该打印机尚未上报机型，因此无法设置专属预设。`,autoMatchPresets:`自动匹配`,autoMatchPresetsHint:`查找料卷预设中标明各机型的对应版本`,kProfilesPerPrinter:`K 值配置`,kProfileNotSet:`未设置`,kProfileFlowMismatch:`此配置是在 {{profile}} 喷嘴上测得的，但当前装的是 {{fitted}} 喷嘴，因此不会应用`,nozzle:`喷嘴`,unknownModel:`未知机型`,onePrinter:`1 台打印机`,nPrinters:`{{n}} 台打印机`,filamentPresetsLoadFailed:`无法加载该料卷的按机型预设`,filamentPresetSaveFailed:`无法保存按机型预设`,totalInventory:`总库存`,totalConsumed:`总消耗`,byMaterial:`按材料`,inPrinter:`在打印机中`,lowStock:`库存不足`,sinceTracking:`自开始追踪`,resetConsumedCounter:`重置计数器`,resetConsumedCounterTooltip:`将此料盘的已消耗克数计数器清零。剩余重量保持不变。`,resetConsumedCounterConfirm:`将此料盘的已消耗克数计数器重置为 0？后续打印将从零开始计数。料盘本身、剩余重量计算和您的设置不会改变。`,resetAllConsumedCounters:`重置所有计数器`,resetAllConsumedCountersTooltip:`将每个料盘的已消耗克数计数器清零。剩余重量保持不变。`,resetAllConsumedCountersConfirm:`将全部 {{count}} 个料盘（含已归档）的已消耗克数计数器重置为 0？这将清空"累计消耗"统计值，后续打印从零开始计数。料盘和剩余重量不会改变。`,consumedCounterReset:`计数器已重置`,allConsumedCountersReset:`已重置 {{count}} 个料盘的计数器`,resetConsumedCounterFailed:`重置计数器失败`,loadedInAms:`已装载到 AMS/外置`,remaining:`剩余`,weightCheck:`重量检查`,lastWeighed:`上次称量`,neverWeighed:`从未称量`,search:`搜索耗材...`,showing:`显示`,to:`到`,of:`共`,show:`显示`,spools:`个耗材`,spool:`个耗材`,page:`页`,noSpoolsMatch:`未找到结果`,noSpoolsMatchDesc:`尝试调整您的搜索或筛选条件。`,active:`活跃`,archived:`已归档`,all:`全部`,used:`已使用`,new:`新的`,clearFilters:`清除筛选`,table:`表格`,cards:`卡片`,net:`净重`,groupSimilar:`分组`,groupedSpools:`{{count}} 个相同耗材`,groupedRows:`行`,columns:`列`,configureColumns:`配置列`,configureColumnsDesc:`拖动以重新排序列或使用箭头。使用眼睛图标切换可见性。`,visible:`可见`,reset:`重置`,cancel:`取消`,applyChanges:`应用更改`,moveUp:`上移`,moveDown:`下移`,hideColumn:`隐藏列`,showColumn:`显示列`,linkToSpool:`链接到耗材`,tagLinked:`标签已链接到耗材`,tagLinkFailed:`链接标签失败`,tagAlreadyLinked:`标签已链接到耗材 #{{id}}`,unknownTag:`检测到未知 RFID 标签`,usageHistory:`使用历史`,noUsageHistory:`暂无使用记录`,printName:`打印名称`,weightConsumed:`消耗重量`,clearHistory:`清除`,historyCleared:`使用历史已清除`,fillSourceLabel:`(库存)`,lowStockThresholdError:`阈值必须在 0.1 到 99.9 之间`,spoolmanFilamentCatalog:`Spoolman 耗材目录`,pickFromSpoolmanCatalog:`从 Spoolman 目录选择…`,spoolmanFilamentSelected:`已从 Spoolman 目录选择耗材`,spoolmanFilamentUnlinked:`已解除耗材目录关联`,noSpoolmanFilaments:`Spoolman 目录中未找到耗材`,spoolmanFilamentColorSwatch:`耗材颜色`,spoolWeightManagedBySpoolman:`空线轴重量在 Spoolman 中按耗材类型管理`,spoolmanCatalogLoadFailed:`无法加载 Spoolman 耗材目录`},timelapse:{title:`延时摄影`,create:`创建延时摄影`,download:`下载`,delete:`删除`,preview:`预览`,frameRate:`帧率`,quality:`质量`,processing:`处理中...`,noTimelapses:`无可用延时摄影`},ams:{title:`AMS`,slot:`槽位`,empty:`空`,emptySlot:`空槽位`,slotEmpty:`空`,slotUnconfigured:`?`,emptySlotReset:`未分配料盘`,unknown:`未知`,humidity:`湿度`,temperature:`温度`,filamentType:`耗材类型`,filamentColor:`颜色`,remaining:`剩余`,history:`AMS 历史`,noHistory:`无可用历史`,configureSlot:`配置槽位`,externalSpool:`外置耗材`,profile:`配置`,kFactor:`K 值`,kFactorShort:`K 值`,fill:`填充`,configure:`配置`,used:`已使用`,remainingUnit:`剩余`},printModal:{variants:{editNote:`这些备选在任务加入队列时确定。如需更改，请取消后重新加入队列。`,title:`打印机备选`,help:`一个任务，占一个队列位。第一台空闲且匹配的打印机会打印它对应的文件。`,unknownModel:`未知型号`,plateFor:`{{filename}} 的盘`,moveUp:`上移`,moveDown:`下移`,queued:`已加入队列，含 {{count}} 个备选`},selectPrinter:`选择打印机`,selectPlate:`选择板`,filamentMapping:`耗材映射`,useArchiveMapping:`映射`,useArchiveMappingTooltip:`从此存档保存的 AMS 映射（来自切片软件）中选择所有槽位，而不是按类型/颜色匹配。`,clickToChangeSlot:`点击更改槽位分配`,reRead:`重新读取`,plateN:`板 {{n}}`,plateFilamentsUnreadable:`无法读取所选盘的耗材信息，因此无法进行映射。取消选择该盘即可将其余盘加入队列。`,totalCost:`总成本：`,slotRemainingShort:` - 剩余 {{grams}}g`,printSettings:`打印设置`,bedLeveling:`热床调平`,flowCalibration:`流量校准`,vibrationCalibration:`振动校准`,layerInspection:`首层检查`,timelapse:`延时摄影`,cancel:`取消`,noPrintersAvailable:`无可用打印机`,printerBusy:`打印机忙碌`,printerOffline:`打印机离线`,sameTypeDifferentColor:`相同类型，不同颜色`,filamentTypeNotLoaded:`耗材类型未装载`,statusReady:`就绪`,statusColorMismatch:`颜色不匹配`,statusTypeNotFound:`未找到类型`,requiredTooltip:`需要：{{name}} - {{color}}`,manuallySelected:`手动选择`,autoMatched:`自动匹配`,selectSlot:`选择槽位`,exactColorMatch:`颜色完全匹配`,slotForFilament:`{{name}} 的打印机槽位`,overrideForFilament:`{{name}} 的耗材覆盖`,sameTypeDifferentColorDetail:`相同类型，不同颜色：需要 {{required}}，槽位为 {{loaded}}`,requiredTypeNotInPrinter:`打印机中未找到所需的耗材类型。`,whenToPrint:`何时打印`,asap:`尽快`,queue:`队列`,schedule:`计划`,dateTime:`日期和时间`,invalidDateTime:`请输入有效的日期和时间`,openCalendar:`打开日历`,requireManualStart:`要求手动开始`,requirePreviousSuccess:`仅在上一次打印成功后开始`,autoOffAfter:`完成后关闭打印机`,helpAsap:`打印将添加到队列顶部，并在符合条件的打印机空闲后立即开始。`,helpSchedule:`如果打印机空闲，打印将在计划时间开始。如果打印机忙碌，则会等待其可用。`,helpQueue:`打印将添加到队列末尾。`,leftNozzle:`左`,rightNozzle:`右`,leftNozzleTooltip:`左喷嘴`,rightNozzleTooltip:`右喷嘴`,ftsSameInletHint:`本次打印的所有耗材都在耗材变轨器 IN-{{inlet}} 上。同一入口的耗材之间切换较慢，可将其中一卷移到另一入口的 AMS。`,rackPosition:`刀架位置`,rackPositionTooltip:`由刀架上的哪个喷嘴打印此耗材。位置编号与打印机上一致。`,rackEmptyPosition:`此刀架位置为空`,rackWrongNozzle:`装有 {{has}} 喷嘴；此耗材需要 {{needs}}`,filamentOverride:`耗材覆盖`,filamentOverrideHint:`可选覆盖用于基于模型的耗材分配。调度器将使用您选择的耗材而不是原始 3MF 值进行匹配。`,originalFilament:`原始`,overrideWith:`覆盖为`,resetToOriginal:`恢复为原始`,insufficientFilamentTitle:`耗材不足`,waitingForAmsStatus:`正在等待 {{printer}} 的 AMS 状态…`,insufficientFilamentMessage:`部分已分配线轴的剩余耗材少于本次打印所需：`,insufficientFilamentLine:`{{printer}} - {{slot}}：需要 {{required}}g，剩余 {{remaining}}g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}：需要 {{required}}g，匹配料卷共剩余 {{remaining}}g（AMS 备用料盘）`,printAnyway:`仍然打印`,forceColorMatch:`强制颜色匹配`,staggerPrinterStarts:`错峰启动打印机`,staggerGroupSize:`组大小`,staggerInterval:`间隔（分钟）`,staggerPreview:`{{printers}} 台打印机 → {{groups}} 个 {{size}} 台的组，每 {{interval}} 分钟启动一次`,staggerLastGroup:`最后一组：{{count}}`,staggerTotal:`共 {{minutes}} 分钟`,staggerToPrinters:`分批发送到 {{count}} 台打印机`,gcodeInjection:`注入自动打印G-code`,insufficientBudget:`预算不足`,unlimitedNoBudget:`无限制 – 未设置预算上限。`,noPrintableCostCenters:`没有可用于打印的有效成本中心。请联系管理员授予你打印权限。`},backup:{includesEncryptionKey:`本地备份包含 MFA 加密密钥文件（DATA_DIR/.mfa_encryption_key），因此备份 ZIP 是自包含的。请将 ZIP 视为敏感文件 — 任何拥有该文件的人都可以解密内部存储的 OIDC 客户端密钥和 TOTP 密钥。`,title:`备份与恢复`,createBackup:`创建备份`,restoreBackup:`恢复备份`,restoreDescription:`从备份文件替换所有数据`,downloadBackup:`下载备份`,uploadBackup:`上传备份`,lastBackup:`上次备份`,autoBackup:`自动备份`,backupNow:`立即备份`,restoreWarning:`警告：恢复备份将覆盖所有当前数据。`,includeArchives:`包含归档`,includeSettings:`包含设置`,includeProfiles:`包含配置文件`,backupSuccess:`备份创建成功`,restoreSuccess:`备份恢复成功`,backupFailed:`备份失败`,restoreFailed:`恢复失败`,restoreNote:`恢复期间虚拟打印机将停止`,githubBackup:`GitHub 备份`,enabled:`已启用`,cloudLoginRequired:`需要登录 Bambu Cloud。请在 配置文件 → 云配置文件 中登录以启用 GitHub 备份。`,cloudLoginRequiredShort:`需要Cloud登录`,githubDescription:`自动将您的配置文件同步到私有 GitHub 仓库以进行备份和版本历史记录。`,repoIsPrivate:`仓库为私有 — 可以安全备份。`,repoIsPublicWarning:`仓库为公开（PUBLIC）。Bambuddy 备份包含 MQTT 凭据、Home Assistant 令牌、Prometheus 令牌、您的 Bambu Cloud 邮箱以及通过 K-profile 暴露的打印机访问代码。在您于提供商设置中将仓库改为私有之前，保存将被阻止。`,repoVisibilityUnknown:`无法确定仓库的可见性。Bambuddy 拒绝向任何未确认为私有的目标进行备份；保存将被阻止。`,repositoryUrl:`仓库 URL`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`允许不安全的 HTTP`,allowInsecureHttpHint:`为无 TLS 的私有网络自托管实例启用`,personalAccessToken:`个人访问令牌`,tokenSaved:`（已保存）`,enterNewToken:`输入新令牌以更新`,tokenHintGitHub:`具有 Contents 读写权限的细粒度令牌，或具有 repo 范围的经典令牌。`,tokenHintGitLab:`具有 api 范围的令牌，或同时具有 read_repository 和 write_repository。`,tokenHintGitea:`具有 write:repository 范围的令牌。`,tokenHintForgejo:`具有 write:repository 范围的令牌。仅限于此仓库的令牌即可。`,branch:`分支`,provider:`Git 提供商`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`仅手动`,hourly:`每小时`,daily:`每天`,weekly:`每周`,includeInBackup:`包含在备份中`,kProfiles:`K 配置文件`,kProfilesDescription:`来自已连接打印机的压力推进校准`,noPrintersConnected:`没有打印机连接`,printersConnected:`{{connected}}/{{total}} 已连接`,cloudProfiles:`云配置文件`,cloudProfilesDescription:`来自 Bambu Cloud 和 Orca Cloud 的耗材、打印机和工艺预设`,cloudProfilesAccounts:`已连接账户 — Bambu Cloud：{{bambu}}，Orca Cloud：{{orca}}`,appSettings:`应用设置`,appSettingsDescription:`Bambuddy 配置（完整数据库）`,spoolInventory:`耗材库存`,spoolInventoryDescription:`耗材卷轴、使用记录和成本追踪`,printArchives:`打印档案`,printArchivesDescription:`打印历史元数据（不含 gcode/3MF 文件）`,lastBackupAt:`上次备份：`,noBackupsYet:`尚无备份`,next:`下次：`,startingBackup:`正在启动备份...`,test:`测试`,enableBackup:`启用备份`,testConnection:`测试连接`,enterRepoUrl:`请输入仓库 URL`,enterRepoAndToken:`请输入仓库 URL 和访问令牌`,repoRequired:`仓库 URL 为必填项`,tokenRequired:`访问令牌为必填项`,githubBackupEnabled:`GitHub 备份已启用`,tokenUpdated:`令牌已更新`,settingsSaved:`设置已保存`,failedToSave:`保存失败：{{message}}`,backupCompleteFiles:`备份完成 - {{count}} 个文件已更新`,backupSkippedNoChanges:`备份已跳过 - 无更改`,backupFailed2:`备份失败：{{message}}`,clearedLogs:`已清除 {{count}} 条日志`,failedToClearLogs:`清除日志失败：{{message}}`,restoreFromGit:{button:`从 Git 恢复`,title:`从 Git 备份恢复`,subtitle:`选择提交以及要恢复的内容`,commitLabel:`备份提交`,latestCommit:`最新备份（分支最新提交）`,categoriesLabel:`恢复内容`,inspecting:`正在读取备份内容...`,itemCount:`备份中有 {{count}} 项`,overwriteLabel:`覆盖已有条目`,overwriteOn:`已有条目将根据备份内容更新。`,overwriteOff:`仅添加缺失的条目，已有条目保持不变。`,selectedCount:`已选择 {{count}} 项`,restoring:`正在恢复...`,confirmTitle:`要从备份恢复吗？`,confirmMessage:`将从此提交恢复所选类别。缺失的条目会被添加，已有条目保持不变。`,confirmMessageOverwrite:`将从此提交恢复所选类别，并覆盖本地已存在的条目。此操作无法撤销。`,kprofilesOverwriteCaveat:`K 值配置是例外：写入插槽总会替换打印机上的校准数据。`,tally:`已恢复 {{restored}} 项，跳过 {{skipped}} 项，失败 {{failed}} 项`,reloadHint:`请重新加载 Bambuddy，以便恢复的数据在各处生效。`,partialHint:`上面列出的类别已完成并已保存。未列出的类别没有执行。`,failed:`恢复失败。`,loadFailed:`无法读取备份仓库。`,details:{notPresent:`此备份提交中不存在`,unreadableJson:`无法解析的 JSON：{{paths}}`,settingsNoPayload:`数据中没有设置`,settingsCredentialsWillSkip:`将跳过 {{count}} 个疑似凭据的键`,settingsCompanionWillSkip:`将跳过 {{count}} 个疑似凭据的键，依赖它们的 {{companion}} 个开关将保持关闭`,settingsCompanionOnlyWillSkip:`{{companion}} 个开关将保持关闭 - 每个开关所需的凭据无法从备份中恢复`,spoolsUsageCount:`其中含 {{count}} 条使用记录`,archivesMetadataOnly:`仅元数据 - 3MF 文件和缩略图不在 Git 备份中`,kprofilesPrinterCount:`涉及 {{count}} 台打印机`},notes:{noData:`此备份中没有这类数据`,archivesPrinterMissing:`部分归档引用了已不存在的打印机 - 已清除关联`,archivesProjectMissing:`部分归档引用了已不存在的项目 - 已清除关联`,archivesOwnerCleared:`部分归档引用了已不存在的用户 - 已清除归属，因此在管理员重新指派之前，只有拥有 archives:read_all 权限的用户才能看到它们`,archivesOwnerUnmatched:`部分归档指向本实例没有的用户 - 已清除归属，而不是根据备份中的用户 ID 猜测，因此在管理员重新指派之前，只有拥有 archives:read_all 权限的用户才能看到它们`,archivesOwnerUnknown:`部分归档在恢复时没有归属 - 此备份未记录归属，因此在管理员指派之前，只有拥有 archives:read_all 权限的用户才能看到它们`,archivesUndeleted:`备份之后被删除的归档重新可见 - 当时启用了覆盖`,archivesMetadataOnly:`恢复的归档仅含元数据 - 3MF 文件和缩略图不在 Git 备份中`,spoolUsageUnresolved:`已跳过 {{count}} 条使用记录 - 其耗材卷不在此备份的耗材列表中，没有可挂接的对象。`,spoolUsageUnlinked:`已恢复 {{count}} 条使用记录，但缺少打印历史关联 - 请同时选择“打印归档”和“耗材库存”以保留该关联。`,spoolTagKept:`{{count}} 个耗材标签保持原样 - 按备份内容会清除此后扫描过的标签，或把它挪到另一卷耗材上。`,settingsCredentialsSkipped:`已跳过 {{count}} 个疑似凭据的键 - 请手动重新输入密钥`,settingsAuthSkipped:`已跳过 {{count}} 项认证设置 - 请在“设置 > 认证”中修改，以便锁定检查继续生效`,settingsCompanionSkipped:`{{keys}} 保持关闭 - 它们各自所需的凭据无法从备份恢复，本实例也没有存储，开启会让集成处于未认证状态`,settingsMqttRelayFailed:`MQTT 设置已恢复，但中继无法重新连接 - 请重启 Bambuddy`,kprofilesAlwaysOverwrite:`K 值配置总是覆盖打印机上对应的槽位`,kprofilesAckUnreliable:`打印机不回应时仍计为已恢复 - 请在打印机上核对配置`,kprofilesPrinterMissing:`没有序列号为 {{serial}} 的打印机 - 已跳过`,kprofilesPrinterOffline:`{{printer}}（{{serial}}）未连接 - 已跳过`,kprofilesUnknownNozzle:`{{serial}} 的喷嘴直径 {{nozzle}} 不在预期范围内 - 已原样发送`,kprofilesUnmatched:`{{nozzle}} 的 {{count}} 个配置在 {{printer}} 上没有对应项 - 已作为新配置添加`,kprofilesSendFailed:`无法将 {{nozzle}} 的配置发送到 {{printer}}（{{serial}}）`,kprofilesRefused:`{{printer}}（{{serial}}）拒绝了 {{nozzle}} 的配置：{{reason}}`,kprofilesStepFailed:`K 值配置步骤未能完成 - {{reason}}。在此之前恢复的内容仍已保存。`}},history:`历史记录`,clear:`清除`,date:`日期`,status:`状态`,trigger:`类型`,triggers:{manual:`备份（手动）`,scheduled:`备份（计划）`,restore:`恢复`},commit:`提交`,localBackup:`本地备份`,localBackupDescription:`创建 Bambuddy 数据的完整备份，包括数据库、档案、上传和所有文件。`,downloadBackupLabel:`下载备份`,completeBackupZip:`完整备份：数据库 + 所有文件（ZIP）`,download:`下载`,preparingBackup:`正在准备备份...`,creatingArchive:`正在创建备份归档...对于大型归档可能需要一些时间。`,downloadingFile:`正在下载备份文件...`,backupDownloaded:`备份下载成功`,failedToCreateBackup:`创建备份失败：{{message}}`,restore:`恢复`,restoreReplacesAll:`恢复将替换所有数据。`,restoreReplacesAllDetail:`您当前的数据库和文件将被完全替换。恢复后需要重启。`,restoreConfirmTitle:`恢复备份`,restoreConfirmMessage:`您确定要从"{{filename}}"恢复吗？这将完全替换您当前的数据库和所有文件。恢复后需要重启应用程序。`,restoreConfirmButton:`恢复备份`,uploadingFile:`正在上传备份文件...`,backupRestoredRestart:`备份已恢复。请重启 Bambuddy。`,failedToRestore:`恢复备份失败。请检查文件格式。`,reloadNow:`立即重新加载`,creatingBackup:`正在创建备份`,restoringBackup:`正在恢复备份`,preparing:`准备中...`,processing:`处理中...`,doNotClosePage:`请不要关闭此页面或导航离开。对于大型备份，此操作可能需要几分钟。`,restoring:`恢复中...`,restoreComplete:`恢复完成`,restoreFailed2:`恢复失败`,importSettings:`从备份文件导入设置`,pleaseWaitRestoring:`请等待数据恢复中`,selectBackupFile:`点击选择备份文件（.json 或 .zip）`,duplicateHandling:`重复项处理方式：`,matchPrinters:`打印机`,matchPrintersBy:`按序列号匹配`,matchSmartPlugs:`智能插座`,matchSmartPlugsBy:`按 IP 地址匹配`,matchNotificationProviders:`通知提供者`,matchNotificationProvidersBy:`按名称匹配`,matchFilaments:`耗材`,matchFilamentsBy:`按名称 + 类型 + 品牌匹配`,matchArchives:`档案`,matchArchivesBy:`按内容哈希匹配（始终跳过）`,matchPendingUploads:`待上传`,matchPendingUploadsBy:`按文件名匹配`,matchSettingsTemplates:`设置和模板`,matchSettingsTemplatesBy:`始终覆盖`,replaceExisting:`替换现有数据`,keepExisting:`保留现有数据`,overwriteDescription:`用备份数据覆盖已存在的项目`,keepDescription:`仅恢复尚不存在的项目`,overwriteCaution:`注意：`,overwriteWarning:`覆盖将用备份数据替换您当前的配置。出于安全考虑，打印机访问代码永远不会被覆盖。`,cancel:`取消`,processingBackup:`正在处理备份文件...`,itemsRestored:`已恢复项目`,itemsSkipped:`已跳过项目`,restored:`已恢复`,skippedAlreadyExist:`已跳过（已存在）`,filesCategory:`文件（3MF、缩略图等）`,andMore:`...还有 {{count}} 项`,newApiKeysGenerated:`已生成新的 API 密钥`,keysShownOnce:`这些密钥仅显示一次。请立即复制！`,copy:`复制`,noDataFound:`在备份文件中未找到可恢复的数据。`,close:`关闭`,scheduledBackup:`定时备份`,scheduledBackupDescription:`按计划自动创建备份快照。输出目录可以挂载到 NAS 或外部存储。`,frequency:`频率`,backupTime:`时间`,retention:`保留`,retentionDescription:`保留备份数量`,outputPath:`输出路径`,outputPathPlaceholder:`默认：{{path}}`,outputPathDescription:`留空以使用默认位置`,runNow:`立即运行`,backupFiles:`备份文件`,noScheduledBackups:`暂无备份`,deleteBackup:`删除`,deleteBackupConfirm:`删除此备份文件？`,backupRunning:`备份中...`,scheduledBackupComplete:`备份成功完成`,scheduledBackupFailed:`备份失败`,nextBackup:`下次备份`,backupSize:`大小`,localTimeHint:`本地时间 ({{tz}})`,defaultPathLabel:`默认：`,pathCheck:{title:`Bambuddy 无法写入该目录`,howToFix:`解决方法：`,sandboxed:`Bambuddy 服务无法写入 {{path}}。它的 systemd 单元以 ProtectSystem=strict 运行，因此除安装、数据和日志目录之外的所有目录对服务而言都是只读的，即使你自己的 shell 可以写入也一样。`,read_only:`{{path}} 位于只读文件系统上。`,permission_denied:`Bambuddy 无权写入 {{path}}。请检查该目录的属主和权限。`,no_space:`{{path}} 所在的文件系统已满。`,not_a_directory:`{{path}} 存在，但不是目录。`,missing:`{{path}} 不存在且无法创建。`,error:`Bambuddy 无法写入 {{path}}。`,ephemeralTitle:`这些备份在容器重建后会丢失`,container_ephemeral:`{{path}} 位于 Bambuddy 容器内部，而不是宿主机上。写入其中的备份会在容器重建时丢失。请从宿主机挂载该目录：`},categories:{settings:`设置`,notification_providers:`通知提供者`,notification_templates:`通知模板`,smart_plugs:`智能插座`,printers:`打印机`,filaments:`耗材`,maintenance_types:`维护类型`,archives:`档案`,projects:`项目`,pending_uploads:`待上传`,external_links:`外部链接`,api_keys:`API 密钥`}},tags:{title:`标签`,addTag:`添加标签`,editTag:`编辑标签`,deleteTag:`删除标签`,tagName:`标签名称`,tagColor:`标签颜色`,noTags:`无标签`,deleteConfirm:`确定要删除此标签吗？`,manageTags:`管理标签`},uploadModal:{title:`上传 3MF 文件`,dragDrop:`将 .3mf 文件拖放到此处`,or:`或`,browseFiles:`浏览文件`,extractionInfo:`将从 3MF 文件元数据中自动提取打印机型号。`,uploaded:`已上传`,failed:`失败`,uploading:`上传中...`,upload:`上传`,uploadFailed:`上传失败`},editArchive:{title:`编辑归档`,name:`名称`,namePlaceholder:`打印名称`,printer:`打印机`,noPrinter:`无打印机`,project:`项目`,noProject:`无项目`,itemsPrinted:`打印数量`,itemsPrintedHelp:`此打印任务中生产的物品数量。整块打印板报废时填 0。`,filamentUsed:`已用耗材 (g)`,filamentUsedPlaceholder:`例如 46.16`,filamentUsedHelp:`当打印任务在没有 3MF 的情况下归档时，可手动填写，使其仍计入耗材总量。重新扫描带有 3MF 的归档时，该数值会从文件中重新读取。`,notes:`备注`,notesPlaceholder:`添加关于此打印的备注...`,externalLink:`外部链接`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`链接到 Printables、Thingiverse 或其他来源`,tags:`标签`,tagsPlaceholder:`添加标签...`,addMoreTags:`添加更多标签...`,matchingTags:`匹配"{{query}}"`,existingTags:`现有标签`,clickToAdd:`（点击添加）`,status:`状态`,failureReason:`失败原因`,selectReason:`选择原因...`,photos:`打印成品照片`,photosHelp:`点击 + 添加打印成品照片`,printResult:`打印成品`,saving:`保存中...`,failureReasons:{adhesionFailure:`附着力失败`,spaghettiDetached:`拉丝 / 脱落`,layerShift:`层偏移`,cloggedNozzle:`喷嘴堵塞`,filamentRunout:`耗材用完`,warping:`翘曲`,stringing:`拉丝`,underExtrusion:`挤出不足`,powerFailure:`断电`,userCancelled:`用户取消`,noStatusUpdate:`未收到状态更新`,other:`其他`},statuses:{completed:`已完成`,failed:`失败`,aborted:`已取消`,printing:`打印中`}},kProfiles:{title:`K 值配置`,noPrintersConfigured:`未配置打印机`,addPrinterInSettings:`在设置中添加打印机以管理 K 值配置`,noActivePrinters:`无活跃打印机`,enablePrinterConnection:`启用打印机连接以查看其 K 值配置`,loadingProfiles:`加载 K 值配置中...`,printerOffline:`打印机离线`,printerOfflineDesc:`所选打印机未连接。开启电源以查看 K 值配置。`,noMatchingProfiles:`无匹配的配置`,noMatchingProfilesDesc:`没有配置匹配您的搜索条件`,noKProfiles:`无 K 值配置`,noKProfilesDesc:`未找到 {{diameter}}mm 喷嘴的压力推进配置`,createFirstProfile:`创建第一个配置`,printer:`打印机`,nozzle:`喷嘴`,refresh:`刷新`,addProfile:`添加配置`,export:`导出`,import:`导入`,select:`选择`,selectAll:`全选`,delete:`删除`,searchPlaceholder:`按名称或耗材搜索...`,allExtruders:`所有挤出机`,leftOnly:`仅左侧`,rightOnly:`仅右侧`,allFlow:`所有流量`,hfOnly:`仅高流量`,sOnly:`仅标准`,sortName:`排序：名称`,sortKValue:`排序：K 值`,sortFilament:`排序：耗材`,leftExtruder:`左挤出机`,rightExtruder:`右挤出机`,modal:{addTitle:`添加 K 值配置`,editTitle:`编辑 K 值配置`,profileName:`配置名称`,profileNamePlaceholder:`我的 PLA 配置`,kValue:`K 值`,kValuePlaceholder:`0.020`,kValueHelp:`典型范围：PLA 0.01 - 0.06，PETG 0.02 - 0.10`,filament:`耗材`,selectFilament:`选择耗材...`,source:{local:`已导入`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`内置`},noFilamentsHelp:`没有可用的耗材。请登录 Bambu Cloud，或在“配置 → 本地配置”中导入预设。`,searchFilaments:`搜索耗材...`,noFilamentMatches:`没有符合搜索条件的耗材`,flowType:`流量类型`,highFlow:`高流量`,standard:`标准`,nozzleSize:`喷嘴尺寸`,extruder:`挤出机`,extruders:`挤出机`,left:`左`,right:`右`,notes:`备注（本地存储）`,notesPlaceholder:`添加关于此配置的备注...`,notesHelp:`备注保存在 Bambuddy 中，不在打印机上`,syncing:`与打印机同步中...`,savingExtruder:`保存到挤出机 {{current}}/{{total}}...`,pleaseWait:`请稍候`},deleteConfirm:{title:`删除配置`,cannotUndo:`此操作无法撤销`,message:`确定要从打印机删除"{{name}}"吗？`},bulkDelete:{title:`删除配置`,cannotUndo:`此操作无法撤销`,message:`确定要从打印机删除 {{count}} 个选中的配置吗？`},toast:{profileSaved:`K 值配置已保存`,profilesSaved:`K 值配置已保存到 {{count}} 个挤出机`,selectAtLeastOneExtruder:`请至少选择一个挤出机`,selectFilament:`请先选择耗材`,filamentNotResolvable:`没有与 {{name}} 对应的 Bambu 耗材 ID，打印机无法保存该配置`,profileDeleted:`K 值配置已删除`,profilesDeleted:`已删除 {{count}} 个配置`,exportedProfiles:`已导出 {{count}} 个配置`,importedProfiles:`已导入 {{count}} / {{total}} 个配置`,noProfilesToExport:`无可导出的配置`,invalidFileFormat:`无效的文件格式`,failedToParseImport:`解析导入文件失败`,failedToSaveBatch:`批量保存 K 值配置失败`,noteSaved:`备注已保存`,failedToSaveNote:`保存备注失败`},permission:{noRead:`您没有刷新配置的权限`,noCreate:`您没有添加配置的权限`,noUpdate:`您没有更新 K 值配置的权限`,noDelete:`您没有删除 K 值配置的权限`,noExport:`您没有导出配置的权限`,noImport:`您没有导入配置的权限`}},virtualPrinter:{title:`虚拟打印机`,running:`运行中`,stopped:`已停止`,description:{default:`启用虚拟打印机，使其在 Bambu Studio 和 OrcaSlicer 中可见。发送到此打印机的文件将直接归档而不打印。`,proxy:`启用代理，将切片软件流量中继到真实打印机，允许在任何网络上远程打印。`},enable:{title:`启用虚拟打印机`,visibleInSlicer:`在切片软件发现中显示为"Bambuddy"`,proxyingTo:`代理到 {{name}}`,notActive:`未激活`},model:{title:`打印机型号`,description:`选择要模拟的打印机型号。`,restartWarning:`更改型号将重启虚拟打印机`},accessCode:{title:`访问码`,isSet:`访问码已设置`,notSet:`未设置访问码 - 需要设置才能启用`,placeholder:`输入 8 位字符代码`,placeholderChange:`输入新代码以更改`,hint:`必须恰好 8 个字符。切片软件使用此代码进行认证。`,charCount:`({{count}}/8)`,inheritedFromTarget:`继承自目标打印机`,derivedFromTargetHint:`使用目标打印机的访问码。桥接会将切片软件的认证转发到实际打印机，因此两个访问码必须匹配 — 如需更改，请在打印机设置中编辑访问码。`,reveal:`显示访问码`,hide:`隐藏访问码`},targetPrinter:{title:`目标打印机`,configured:`代理目标已配置`,notConfigured:`未选择目标打印机 - 代理模式需要设置`,placeholder:`选择打印机...`,hint:`选择要将切片软件流量代理到的打印机。打印机必须处于局域网模式。`,noPrinters:`未配置打印机。请先添加打印机以使用代理模式。`},remoteInterface:{title:`网络接口覆盖`,configured:`接口覆盖已激活`,optional:`可选 - 当自动检测的 IP 不正确时使用（例如多网卡、Docker、VPN）`,placeholder:`自动检测（默认）...`,hint:`覆盖通过 SSDP 广播并在 TLS 证书中使用的 IP 地址。在 Bambuddy 有多个网络接口时很有用。`},mode:{title:`模式`,archive:`归档`,archiveDesc:`立即归档文件`,review:`审核`,reviewDesc:`归档前审核`,queue:`队列`,queueDesc:`归档并添加到队列`,proxy:`代理`,proxyDesc:`中继到真实打印机`},autoDispatch:{title:`自动派发`,description:`添加到队列时自动开始打印。关闭后，打印任务等待手动派发。`},queueForceColorMatch:{title:`强制颜色匹配`,description:`拒绝派发到没有完全相同耗材类型和颜色的打印机。默认关闭 — 不启用时，队列仅按型号匹配，可能选到颜色错误的打印机。`},saveAmsMapping:{title:`保存 AMS 映射`,description:`将切片软件自身选择的 AMS 槽位（来自 project_file MQTT 命令）保存到存档中，以便之后重新打印时复用同一卷实体线材，而不是根据文件的类型/颜色重新推导。默认关闭。`},gcodeInjection:{title:`G-code 注入`,description:`将“设置”中按型号配置的 G-code 片段应用到此 VP 的作业。默认关闭。`},tailscaleDisabled:{title:`Tailscale 集成`,description:`启用以将此 VP 标记为通过 Tailscale 公开。显示主机的 Tailscale 地址，以便您知道要粘贴到切片器中的 IP。CA 导入步骤保持不变 — 此开关对证书无影响。`},setupRequired:{title:`需要设置`,description:`虚拟打印机功能需要额外的系统配置才能工作。包括端口转发、防火墙规则和平台特定设置。`,readGuide:`启用前请阅读设置指南`},archiveNameSource:{title:`存档名称来源`,description:`选择通过虚拟打印机接收文件时新存档的命名方式。"元数据"使用 3MF 中嵌入的切片标题（默认）。"文件名"使用 Bambu Studio 通过 FTP 发送的文件名。注意：当 3MF 包含标题字段时，Bambu Studio 会用该字段覆盖您在"发送到打印机"对话框中输入的名称，因此两种模式通常会产生相同的字符串。`,metadata:`元数据`,filename:`文件名`},caCert:{title:`切片软件证书`,description:`虚拟打印机使用由 Bambuddy CA 签发的 TLS 证书。将此 CA 证书导入切片软件的信任库一次，切片软件即可接受连接 — 无需再通过命令行获取。`,copy:`复制`,copied:`已复制`,download:`下载`,fingerprint:`SHA-256`},howItWorks:{title:`工作原理`,step1:`在同一局域网中，虚拟打印机会通过发现机制自动出现在您的切片软件（Bambu Studio / OrcaSlicer）中。从其他网络，通过 IP 地址和访问码手动添加。`,step2:`在归档、审核和队列模式下，使用切片软件中的"发送"按钮将 3MF 文件上传到 Bambuddy。切片软件会显示"打印成功"— 文件已存储，未打印。`,step3:`在代理模式下，虚拟打印机将所有流量中继到真实打印机 — 打印会立即开始，就像直接连接一样。`},status:{title:`状态详情`,printerName:`打印机名称`,model:`型号`,serialNumber:`序列号`,mode:`模式`,pendingFiles:`待处理文件`,targetPrinter:`目标打印机`,ftpPort:`FTP 端口`,mqttPort:`MQTT 端口`,ftpConnections:`FTP 连接`,mqttConnections:`MQTT 连接`},toast:{updated:`虚拟打印机设置已更新`,failedToUpdate:`更新设置失败`,copyFailed:`复制失败 — 请手动选中文本`,accessCodeRequired:`请先设置访问码`,targetPrinterRequired:`请先选择目标打印机`,bindIpRequired:`请先设置绑定 IP`,accessCodeEmpty:`访问码不能为空`,accessCodeLength:`访问码必须恰好 8 个字符`,targetCodeChangedRebind:`访问码已同步到新的目标打印机。请在切片软件中重新添加此设备以使用新的访问码。`,created:`虚拟打印机已创建`,failedToCreate:`创建虚拟打印机失败`,deleted:`虚拟打印机已删除`,failedToDelete:`删除虚拟打印机失败`},list:{title:`虚拟打印机`,add:`添加`,addFirst:`添加虚拟打印机`,empty:`未配置虚拟打印机。添加一个以开始使用。`},bindIp:{title:`绑定接口`,placeholder:`选择接口...`,hint:`此虚拟打印机绑定的网络接口。每台打印机必须唯一。`},proxy:{accessCodeHint:`在代理模式下，在切片软件中使用目标打印机的访问码。连接会透明转发到真实打印机。`},addDialog:{title:`添加虚拟打印机`,name:`名称`,hint:`创建后可以配置访问码、目标打印机和其他设置。`,create:`创建`},deleteConfirm:{title:`删除虚拟打印机`,message:`确定要删除"{{name}}"吗？这将停止此打印机的所有服务。`}},modelViewer:{openInSlicer:`在切片软件中打开`,openInSlicerWith:`用{{slicer}}打开`,moreSlicerOptions:`更多切片软件选项`,openInSlicerFailed:`无法在切片软件中打开`,tabs:{model:`3D 模型`},notAvailable:`不可用`,plates:`板`,allPlates:`所有板`,plateNumber:`板 {{number}}`,plateCount:`{{count}} 个板`,plateCount_other:`{{count}} 个板`,objectCount:`{{count}} 个对象`,objectCount_other:`{{count}} 个对象`,filamentCount:`{{count}} 种耗材`,filamentCount_other:`{{count}} 种耗材`,eta:`预计 {{minutes}} 分钟`,noPreview:`此文件无可用预览`,pagination:{pageOf:`第 {{current}} / {{total}} 页`,prev:`上一页`,next:`下一页`},errors:{failedToLoad:`加载文件失败`,noMeshes:`3MF 文件中未找到网格`,unsupportedFormat:`不支持的文件格式`}},maintenanceDescriptions:{lubricateCarbonRods:`在碳纤维杆上涂抹润滑剂以确保顺畅运动`,lubricateRails:`在线性导轨上涂抹润滑剂以确保顺畅运动`,cleanNozzle:`清洁热端和喷嘴以防止堵塞`,checkBelts:`检查皮带张力以确保打印精度`,cleanBuildPlate:`清洁构建板以获得更好的附着力`,checkExtruder:`检查挤出机齿轮磨损情况`,checkCooling:`确保冷却风扇正常工作`,generalInspection:`打印机综合检查`,cleanCarbonRods:`清洁碳纤维杆以减少摩擦`,lubricateSteelRods:`在钢杆上涂抹润滑剂以确保顺畅运动`,cleanSteelRods:`清洁钢杆以减少摩擦`,cleanLinearRails:`擦拭线性导轨以清除灰尘和碎屑`,checkPtfeTube:`检查 PTFE 管的磨损或损坏`,replaceHepaFilter:`更换 HEPA 过滤器以保证空气质量`,replaceCarbonFilter:`更换活性炭过滤器`,lubricateLeftNozzleRail:`润滑左喷嘴导轨（H2 系列）`},haSensors:{label:`传感器`,unavailable:`不可用`,blocksPrints:`{{entity}} — 警报期间暂停打印`,states:{open:`打开`,closed:`关闭`,unlocked:`已解锁`,locked:`已锁定`,detected:`已检测`,clear:`无`,wet:`潮湿`,dry:`干燥`,problem:`异常`,ok:`正常`,running:`运行中`,stopped:`已停止`,on:`开`,off:`关`},sectionTitle:`Home Assistant 传感器（打印机）`,add:`添加传感器`,addTitle:`添加 Home Assistant 传感器`,editTitle:`编辑 Home Assistant 传感器`,empty:`还没有传感器。绑定 Home Assistant 的门磁或温度计，即可显示在打印机卡片上。`,unknownPrinter:`未知打印机`,badgeBlocks:`暂停打印`,badgeNotifies:`发送通知`,badgeHidden:`卡片上隐藏`,printer:`打印机`,entity:`实体`,searchPlaceholder:`搜索实体...`,noEntities:`没有匹配的实体`,name:`显示名称`,alertWhen:`警报条件`,alertNever:`从不 — 仅显示`,alertAbove:`高于`,alertBelow:`低于`,alertHint:`进入警报状态后会在打印机卡片上高亮显示，并启用下面的选项。`,showOnCard:`在打印机卡片上显示`,notifyOnAlert:`触发警报时发送通知`,blockPrint:`警报期间暂停队列中的打印`,blockPrintHint:`任务会留在队列中，传感器恢复后自动开始。Home Assistant 无法连接时忽略此设置。`,toast:{created:`已添加传感器`,updated:`已保存传感器`,deleted:`已删除传感器`},error:{pickEntity:`请选择一个 Home Assistant 实体`,nameRequired:`请输入显示名称`,printerRequired:`请选择一台打印机`,alertRequired:`请先设置警报条件`}},locationHaSensors:{sectionTitle:`Home Assistant 传感器（存放位置）`,sectionDescription:`将 Home Assistant 的温度、湿度或电量传感器绑定到存放位置，即可在耗材卡片和表格中显示实时数值。每个存放位置每个类别只能绑定一个传感器。`,add:`添加传感器`,addTitle:`添加 Home Assistant 传感器`,editTitle:`编辑 Home Assistant 传感器`,empty:`还没有传感器。绑定 Home Assistant 的温度或湿度传感器，即可显示在耗材卡片上。`,unknownLocation:`未知位置`,location:`存放位置`,showOnCard:`在耗材卡片上显示`,overwriteConfirm:{title:`要替换现有传感器吗？`,messageTemperature:`"{{location}}" 已绑定温度传感器：{{name}}。继续将替换它。`,messageHumidity:`"{{location}}" 已绑定湿度传感器：{{name}}。继续将替换它。`,messageBattery:`"{{location}}" 已绑定电池传感器：{{name}}。继续将替换它。`},autoAdd:{confirmTitle:`是否也添加其他传感器？`,confirmMessage:`Bambuddy 还为此位置找到了其他传感器。请选择要一并添加的传感器。`,added:`已同时添加：{{names}}`,noneFound:`未找到该位置匹配的温度、湿度或电池传感器。`,onlyThisOne:`仅此一个`},options:{buttonLabel:`传感器选项`,title:`位置传感器选项`,description:`当某个位置绑定第一个传感器时，若自动添加温度、湿度或电池传感器，将使用这些默认值。`,generalSettings:`常规设置`,pollInterval:`更新间隔（秒）`,pollIntervalHint:`Bambuddy 轮询 Home Assistant 并刷新屏幕上传感器数值的频率。最少 60 秒。`,colorizeValues:`根据警报阈值为传感器数值着色`,aboveColor:`超过阈值的颜色`,belowColor:`低于阈值的颜色`,optimalColor:`最佳值颜色`,colors:{red:`红色`,orange:`橙色`,yellow:`黄色`,green:`绿色`,blue:`蓝色`,purple:`紫色`,pink:`粉色`},saved:`选项已保存`,saveFailed:`保存选项失败`,reset:`重置`,resetConfirm:{title:`要重置所有现有位置传感器吗？`,message:`这将使用上方配置的值覆盖所有现有存储位置温度、湿度和电池传感器的警报阈值、通知和卡片可见性设置，并将每个传感器的名称恢复为其在 Home Assistant 中的友好名称——不会影响打印机传感器。此操作无法撤销。根据传感器数量的不同，这可能需要一些时间。`},resetDone:`已应用于 {{count}} 个位置传感器`,resetFailed:`重置位置传感器失败`},deleteAllConfirm:{title:`删除所有传感器？`,message:`这将删除绑定到"{{location}}"的全部 {{count}} 个传感器。此操作无法撤销。`},currentlyBound:`当前绑定：{{entity}}`,error:{locationRequired:`请选择存放位置`},toast:{created:`已添加传感器`,updated:`已保存传感器`,deleted:`已删除传感器`}},smartPlugs:{offline:`离线`,admin:`管理`,openPlugAdminPage:`打开插座管理页面`,deleteSmartPlug:`删除智能插座`,turnOnSmartPlug:`开启智能插座`,turnOffSmartPlug:`关闭智能插座`,turnOn:`开启`,turnOff:`关闭`,addSmartPlug:{scanningNetwork:`扫描网络中...`,chooseEntity:`选择实体...`,connectionFailed:`连接失败`,searchEntities:`搜索实体...`,searchPowerSensors:`搜索功率传感器...`,searchEnergySensors:`搜索能量传感器...`,placeholders:{plugName:`客厅插座`,mqttStateOnValue:`ON、true、1`,mqttSameAsPower:`与功率主题相同，或不同`}},linkedTo:`关联到：`,monitorOnly:`仅监控`,alerts:`警报`,scheduleOn:`开启 {{time}}`,scheduleOff:`关闭 {{time}}`,on:`开启`,off:`关闭`,power:`功率`,kwhToday:`今日kWh`,settings:`设置`,automationSettings:`自动化设置`,showInSwitchbar:`在开关栏显示`,quickAccessSidebar:`从侧边栏快速访问`,enabled:`已启用`,enableAutomation:`为此插座启用自动化`,autoOn:`自动开启`,autoOnDescription:`打印开始时开启`,autoOff:`自动关闭`,autoOffDescription:`打印完成时关闭（一次性）`,autoOffPersistent:`保持启用`,autoOffPersistentDescription:`在打印之间保持启用而非一次性`,controlsPrinterPower:`为打印机供电`,controlsPrinterPowerDescription:`如果此插座仅为配件（滤芯风扇、灯光）供电，请关闭此选项；否则关闭插座会将打印机标记为离线。`,autoOffAfterDrying:`干燥完成后自动关闭`,autoOffAfterDryingDescription:`AMS 干燥完成后关闭`,delayAfterDryingMinutes:`干燥后延迟（分钟）`,turnOffDelayMode:`关闭延迟模式`,time:`时间`,temp:`温度`,delayMinutes:`延迟（分钟）`,tempThreshold:`温度阈值（°C）`,tempThresholdDescription:`当喷嘴冷却到此温度以下时关闭`,edit:`编辑`,deleteConfirm:`确定要删除"{{name}}"吗？此操作无法撤销。`,turnOnConfirm:`确定要开启"{{name}}"吗？`,turnOffConfirm:`确定要关闭"{{name}}"吗？这将切断连接设备的电源。`,failedToTurn:`无法{{action}}"{{name}}"`,unknown:`未知`,addTitle:`添加智能插座`,editTitle:`编辑智能插座`,stopScanning:`停止扫描`,discoverTasmota:`发现Tasmota设备`,foundDevices:`找到{{count}}个设备 - 点击选择：`,noDevicesFound:`未在您的网络中找到Tasmota设备`,haNotConfigured:`Home Assistant未配置。请在以下位置设置`,haSettingsPath:`设置 → 网络 → Home Assistant`,selectEntity:`选择实体 *`,ipAddress:`IP地址 *`,nameLabel:`名称 *`,username:`用户名`,password:`密码`,authHint:`如果您的Tasmota设备不需要认证，请留空`,linkToPrinter:`关联打印机`,noPrinter:`无打印机（仅手动控制）`,linkingDescription:`关联后可在打印开始/完成时自动开关`,powerAlerts:`功率警报`,alertAbove:`高于时警报（W）`,alertBelow:`低于时警报（W）`,alertDescription:`当电力消耗超过这些阈值时收到通知。留空以禁用该方向。`,dailySchedule:`每日计划`,turnOnAt:`开启时间`,turnOffAt:`关闭时间`,scheduleDescription:`每天在这些时间自动开关插座。留空以跳过该操作。`,showOnPrinterCard:`在打印机卡片上显示`,displayOnPrinterCard:`在打印机卡片上显示按钮`,connectedResult:`已连接！`,deviceLabel:`设备：{{name}} - `,stateLabel:`状态：{{state}}`,test:`测试`,delete:`删除`,save:`保存`,add:`添加`,cancel:`取消`,failedToStartScan:`无法开始扫描`,nameRequired:`名称为必填项`,entityRequired:`Home Assistant插座需要实体`,mqttTopicRequired:`必须为功率、能源或状态监控配置至少一个MQTT主题`,loadingEntities:`正在加载实体...`,loading:`加载中...`,failedToLoadEntities:`加载实体失败：{{error}}`,noEntitiesMatching:`未找到匹配"{{search}}"的实体`,noEntitiesAvailable:`无可用实体`,searchingEntities:`搜索所有实体（找到{{count}}个）`,showingEntities:`显示 switch、light、input_boolean（{{count}}个可用）`,energyMonitoringOptional:`能源监控（可选）`,energyMonitoringHint:`搜索并选择提供功率/能源数据的传感器。`,powerSensorW:`功率传感器（W）`,energyTodayKwh:`今日能源（kWh）`,totalEnergyKwh:`总能源（kWh）`,noMatchingSensors:`无匹配的传感器`,none:`无`,mqttNotConfigured:`MQTT代理未配置。请在以下位置设置代理地址`,mqttSettingsPath:`设置 → 网络 → MQTT发布`,mqttNotConfiguredSuffix:`（您不需要启用发布，只需填写代理详细信息）。`,mqttMonitorOnlyDescription:`MQTT插座通过MQTT订阅接收功率/能源数据。开关控制不可用 - 请使用您的MQTT代理或家庭自动化系统。`,powerMonitoring:`功率监控`,energyMonitoring:`能源监控`,stateMonitoring:`状态监控`,optional:`可选`,topic:`主题`,jsonPath:`JSON路径`,multiplier:`乘数`,onValue:`ON值`,mqttPowerHint:`JSON路径从JSON负载中提取值（例如"power_l1"）。如果主题发布原始数值，请留空。
 乘数：mW→W使用0.001，kW→W使用1000。`,mqttEnergyHint:`JSON路径从JSON负载中提取值。原始值请留空。
 乘数：Wh→kWh使用0.001，MWh→kWh使用1000。`,mqttStateHint:`JSON路径从JSON负载中提取值。原始值请留空。
-ON值：表示"ON"的确切字符串。留空以自动检测（ON、true、1）。`,restControl:`控制`,restOnUrl:`开启 URL`,restOffUrl:`关闭 URL`,restOnBody:`开启请求体`,restOffBody:`关闭请求体`,restMethod:`HTTP 方法`,restHeaders:`Custom Headers (JSON)`,restStatusUrl:`状态 URL`,restStatusPath:`状态 JSON 路径`,restStatusOnValue:`开启值`,restPowerUrl:`功率URL`,restPowerPath:`功率 JSON 路径`,restPowerMultiplier:`功率乘数`,restEnergyUrl:`能耗URL`,restEnergyPath:`能耗 JSON 路径（今日）`,restEnergyTotalPath:`能耗 JSON 路径（累计值）`,restEnergyTotalMultiplier:`累计值倍数`,restEnergyTotalPathHint:`例如 aenergy.total`,restEnergyTotalHint:`许多插座（包括所有 Shelly）只提供永不归零的累计计数值。该值应填在此处，而不是上面的字段：若当作今日用量读取，它在午夜不会归零，而“昨日”和“总计”会一直为空。Bambuddy 会据此推算“今日”和“昨日”，这需要一到两天的采样数据。Shelly 以瓦时为单位，因此倍数请填 0.001。`,restEnergyMultiplier:`能耗乘数`,restUrlRequired:`REST 插座至少需要一个 URL（ON 或 OFF）`,restHeadersHint:`例如 {"Authorization": "Bearer your-token"}`,restBodyHint:`例如 ON, {"state": "on"}`,restStatusHint:`轮询当前状态的 URL`,restPathHint:`例如 state 或 data.power.status`,restPowerUrlHint:`功率数据的独立URL（留空则使用状态URL）`,restEnergyUrlHint:`能耗数据的独立URL（留空则使用状态URL）`,restEnergyHint:`每个值可以使用独立的URL，或回退到状态URL。使用乘数进行单位转换（例如：0.001 将 Wh 转换为 kWh）。`,testConnection:`测试连接`,connectionSuccess:`连接成功`,noSwitchesInSwitchbar:`开关栏中没有开关`,enableSwitchbarHint:`在设置 > 智能插座中启用"在开关栏显示"`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`电子邮件`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`SMTP 电子邮件通知`,telegram:`通过 Telegram 机器人发送通知`,discord:`通过 Webhook 发送到 Discord 频道`,ntfy:`免费、可自托管的推送通知`,pushover:`简单、可靠的推送通知`,callmebot:`通过 CallMeBot 免费发送 WhatsApp 通知`,webhook:`通用 HTTP POST 到任意 URL`,homeassistant:`Home Assistant 仪表板中的持久通知`,bark:`通过 Bark 推送 iOS 通知（可自建服务器）`},lastSuccess:`上次：{{date}}`,error:`错误`,printer:`打印机：`,allPrinters:`所有打印机`,sendTestNotification:`发送测试通知`,eventSettings:`事件设置`,enabled:`已启用`,sendFromProvider:`从此提供商发送通知`,printEvents:`打印事件`,printerStatus:`打印机状态`,amsAlarms:`AMS 警报`,amsHtAlarms:`AMS-HT 警报`,printQueue:`打印队列`,start:`开始`,plateCheck:`热床检测`,complete:`完成`,failed:`失败`,stopped:`已停止`,progress:`进度`,offline:`离线`,lowFilament:`耗材不足`,maintenance:`维护`,amsHumidity:`AMS 湿度`,amsTemp:`AMS 温度`,amsDryingSuspended:`干燥已暂停`,amsHtHumidity:`AMS-HT 湿度`,amsHtTemp:`AMS-HT 温度`,bedCooled:`热床已冷却`,firstLayer:`首层完成`,quiet:`免打扰`,digest:`摘要 {{time}}`,printStarted:`打印已开始`,plateNotEmpty:`热床非空`,plateNotEmptyDescription:`打印前检测到物体`,plateClearRequired:`需要确认热床已清空`,plateClearRequiredDescription:`打印完成，队列等待热床确认`,plateClear:`热床确认`,printCompleted:`打印已完成`,bedCooledLabel:`热床已冷却`,bedCooledDescription:`打印后热床温度降至阈值以下`,firstLayerCompleteLabel:`首层打印完成`,firstLayerCompleteDescription:`首层完成时发送带照片的通知`,missingSpoolAssignmentLabel:`缺少料卷分配`,billingChargeFailedLabel:`计费失败`,billingChargeFailedDescription:`无法记录打印费用时通知`,missingSpoolAssignmentDescription:`当打印开始且所需料盘没有分配料卷时发送通知`,printFailed:`打印失败`,printStopped:`打印已停止`,progressMilestones:`进度里程碑`,progressMilestonesDescription:`在 25%、50%、75% 时通知`,printerOffline:`打印机离线`,printerError:`打印机错误`,aiFailureDetection:`AI 失败检测`,aiFailureDetectionDescription:`当 Obico AI 检测到可能的打印失败时通知`,lowFilamentLabel:`耗材不足`,maintenanceDue:`需要维护`,maintenanceDueDescription:`需要维护时通知`,amsHumidityHigh:`AMS 湿度过高`,amsHumidityHighDescription:`普通 AMS 湿度超过阈值`,amsTemperatureHigh:`AMS 温度过高`,amsTemperatureHighDescription:`普通 AMS 温度超过阈值`,amsDryingSuspendedTitle:`自动干燥已暂停`,amsDryingSuspendedDescription:`湿度始终未降到阈值以下，已放弃对某个 AMS 单元的自动干燥`,amsHtHumidityHigh:`AMS-HT 湿度过高`,amsHtHumidityHighDescription:`AMS-HT 湿度超过阈值`,amsHtTemperatureHigh:`AMS-HT 温度过高`,amsHtTemperatureHighDescription:`AMS-HT 温度超过阈值`,inventoryAlerts:`库存警报`,stockReorderAlert:`补货警报`,stockReorderAlertDescription:`SKU 已达到补货点`,stockBreakAlert:`断货警报`,stockBreakAlertDescription:`库存将在补货到达前耗尽`,jobAdded:`任务已添加`,jobAddedDescription:`任务已添加到队列`,jobAssigned:`任务已分配`,jobAssignedDescription:`基于模型的任务已分配给打印机`,jobStarted:`任务已开始`,jobStartedDescription:`队列任务已开始打印`,jobWaiting:`任务等待中`,jobWaitingDescription:`任务正在等待耗材或打印机`,jobSkipped:`任务已跳过`,jobSkippedDescription:`任务已跳过（上一个失败）`,jobFailed:`任务失败`,jobFailedDescription:`任务启动失败`,queueComplete:`队列已完成`,queueCompleteDescription:`所有队列任务已完成`,quietHours:`免打扰时段`,noNotificationsDuring:`在此时段内不发送通知`,editProviderToChangeQuietHours:`编辑提供商以更改免打扰时段`,dailyDigest:`每日摘要`,batchNotifications:`将通知汇总为每日摘要`,sendAt:`发送于 {{time}}`,editProviderToChangeDigestTime:`编辑提供商以更改摘要时间`,edit:`编辑`,deleteProvider:`删除通知提供商`,deleteConfirm:`确定要删除"{{name}}"吗？此操作无法撤销。`,delete:`删除`,addTitle:`添加通知提供商`,editTitle:`编辑通知提供商`,nameLabel:`名称 *`,namePlaceholder:`我的通知`,providerTypeLabel:`提供商类型 *`,configuration:`配置`,testConfiguration:`测试配置`,printerFilter:`打印机筛选`,onlyFromPrinter:`仅发送来自此打印机的事件通知`,quietHoursDnd:`免打扰时段`,quietStart:`开始`,quietEnd:`结束`,dailyDigestLabel:`每日摘要`,sendDigestAt:`发送摘要于`,digestCollected:`事件将被收集并在此时间作为单条摘要发送`,notificationEvents:`通知事件`,progressPercent:`（25%、50%、75%）`,bedCooledAfterPrint:`（打印完成后）`,haSensorAlert:`打印机传感器警报`,haSensorAlertDescription:`（已绑定的 Home Assistant 传感器需要关注）`,locationHaSensorAlert:`存放位置传感器警报`,locationHaSensorAlertDescription:`（绑定到存放位置的 Home Assistant 传感器需要关注）`,eventPriority:{sectionTitle:`ntfy 优先级`,helpNtfy:`为每个已启用的事件选择优先级。ntfy 使用它来升级提醒（声音、可见性、推送行为）。此处未设置的级别将使用 ntfy 服务器默认值。`,min:`最低`,low:`低`,default:`默认`,high:`高`,urgent:`紧急`},cancel:`取消`,save:`保存`,add:`添加`,nameRequired:`名称为必填项`,fieldRequired:`{{field}}为必填项`,haDataInvalid:`Data 字段必须是有效的 JSON 对象，例如 {"priority": "high", "ttl": 0}`,phoneNumber:`电话号码`,apiKey:`API 密钥`,serverUrl:`服务器 URL`,topic:`主题`,authToken:`认证令牌`,userKey:`用户密钥`,appToken:`应用令牌`,priority:`优先级`,pushoverRetry:`紧急重试 (秒)`,pushoverExpire:`紧急过期 (秒)`,botToken:`机器人令牌`,chatId:`聊天 ID`,telegramThreadId:`论坛话题 ID`,telegramThreadIdHelp:`可选。发送到论坛群组中的指定话题，即话题链接末尾的数字 (t.me/c/.../25)。留空则发送到常规话题。`,telegramThreadIdInvalid:`论坛话题 ID 必须是数字。`,smtpServer:`SMTP 服务器`,smtpPort:`SMTP 端口`,security:`安全`,authentication:`认证`,username:`用户名`,password:`密码`,fromEmail:`发件人邮箱`,toEmail:`收件人邮箱`,webhookUrl:`Webhook URL`,payloadFormat:`负载格式`,authorization:`授权`,titleFieldName:`标题字段名`,messageFieldName:`消息字段名`,editTemplate:`编辑模板：{{name}}`,titleLabel:`标题`,bodyLabel:`正文`,titlePlaceholder:`通知标题...`,bodyPlaceholder:`通知正文...`,availableVariables:`可用变量`,clickToInsert:`点击插入到正文光标位置`,livePreview:`实时预览`,hide:`隐藏`,show:`显示`,loadingPreview:`加载预览中...`,enterTemplateContent:`输入模板内容以查看预览`,titlePreview:`标题：`,bodyPreview:`正文：`,resetToDefault:`恢复默认`,titleRequired:`标题为必填项`,bodyRequired:`正文为必填项`,notificationLog:`通知日志`,showFailedOnly:`仅显示失败`,last24Hours:`最近 24 小时`,last7Days:`最近 7 天`,last30Days:`最近 30 天`,last90Days:`最近 90 天`,justNow:`刚刚`,noFailedNotifications:`没有失败的通知`,noNotificationsLogged:`没有通知记录`,unknownProvider:`未知提供商`,logTitle:`标题`,logMessage:`消息`,logError:`错误`,logProvider:`提供商：{{type}}`,logTime:`时间：{{time}}`,refresh:`刷新`,clearOld:`清除旧记录`,statsSummary:`最近 {{days}} 天：`,statsNotifications:`条通知`,statsSent:`{{count}} 条已发送`,statsFailed:`{{count}} 条失败`,eventTypes:{print_start:`打印已开始`,print_complete:`打印完成`,print_failed:`打印失败`,print_stopped:`打印已停止`,print_progress:`进度`,printer_offline:`打印机离线`,printer_error:`打印机错误`,filament_low:`耗材不足`,maintenance_due:`需要维护`,test:`测试`},userEmail:{title:`通知`,emailNotifications:`邮件通知`,emailNotificationsDesc:`接收您自己打印任务的邮件通知。邮件将通过高级身份验证中配置的 SMTP 设置发送。`,sendingTo:`通知将发送至`,noEmailWarning:`您的账户没有邮件地址。请联系管理员添加。`,printJobNotifications:`打印任务通知`,printJobNotificationsDesc:`选择哪些事件会触发您提交的打印任务的邮件通知。`,printJobStarts:`打印任务开始`,printJobStartsDesc:`当您的打印任务开始时收到通知。`,printJobFinishes:`打印任务完成`,printJobFinishesDesc:`当您的打印任务成功完成时收到通知。`,printErrors:`打印错误`,printErrorsDesc:`当您的打印任务失败或遇到错误时收到通知。`,printJobStops:`打印任务停止`,printJobStopsDesc:`当您的打印任务被取消或停止时收到通知。`,saveSuccess:`通知偏好设置已保存。`,saveError:`保存通知偏好设置失败。`}},richTextEditor:{bold:`粗体`,italic:`斜体`,underline:`下划线`,bulletList:`无序列表`,numberedList:`有序列表`,alignLeft:`左对齐`,alignCenter:`居中对齐`,alignRight:`右对齐`,addLink:`添加链接`,removeLink:`移除链接`},externalLinks:{title:`侧边栏链接`,sidebarLayout:`侧边栏`,sidebarLayoutDescription:`显示或隐藏内置页面，添加外部链接，并拖动项目以重新排序侧边栏导航。`,systemPages:`Bambuddy 页面`,externalLinks:`外部链接`,visibleInSidebar:`在侧边栏中显示`,hiddenFromSidebar:`在侧边栏中隐藏`,requiredInSidebar:`侧边栏中必需`,hidePage:`隐藏页面`,showPage:`显示页面`,settingsCannotBeHidden:`设置不能隐藏`,noLinksConfigured:`未配置外部链接`,deleteLink:`删除链接`,removeCustomIcon:`移除自定义图标`,openInNewTab:`在新标签页中打开`,placeholders:{linkName:`我的链接`}},keyboardShortcuts:{title:`键盘快捷键`,navigation:`导航`,archivesSection:`归档`,kProfilesSection:`K 值配置`,generalSection:`通用`,shortcuts:{goToPrinters:`前往打印机`,goToArchives:`前往归档`,goToQueue:`前往队列`,goToStats:`前往统计`,goToProfiles:`前往云端配置`,goToSettings:`前往设置`,focusSearch:`聚焦搜索`,openUploadModal:`打开上传对话框`,clearSelection:`清除选择 / 取消焦点`,contextMenu:`卡片右键菜单`,refreshProfiles:`刷新配置`,newProfile:`新建配置`,exitSelectionMode:`退出选择模式`,showHelp:`显示此帮助`},footer:`按 Esc 或点击外部关闭`},notificationLog:{title:`通知日志`,events:{printStarted:`打印开始`,printComplete:`打印完成`,printFailed:`打印失败`,printStopped:`打印停止`,progress:`进度`,printerOffline:`打印机离线`,printerError:`打印机错误`,lowFilament:`耗材不足`,maintenanceDue:`维护到期`,test:`测试`},timeAgo:{justNow:`刚刚`,minutesAgo:`{{minutes}} 分钟前`,hoursAgo:`{{hours}} 小时前`}},restoreBackup:{title:`恢复备份`,restoring:`恢复中...`,restoreComplete:`恢复完成`,restoreFailed:`恢复失败`,importSettings:`从备份文件导入设置`,pleaseWait:`请稍候，正在恢复您的数据`,clickToSelect:`点击选择备份文件（.json 或 .zip）`,howDuplicateHandling:`重复处理方式：`,categories:{printers:`打印机`,smartPlugs:`智能插座`,notificationProviders:`通知提供商`,filaments:`耗材`,archives:`归档`,pendingUploads:`待处理上传`,settingsTemplates:`设置和模板`},matchingInfo:{printers:`按序列号匹配`,smartPlugs:`按 IP 地址匹配`,notificationProviders:`按名称匹配`,filaments:`按名称 + 类型 + 品牌匹配`,archives:`按内容哈希匹配`,pendingUploads:`按文件名匹配`,settingsTemplates:`始终覆盖`},replaceExisting:`替换现有数据`,keepExisting:`保留现有数据`,replaceDescription:`用备份数据覆盖已存在的项目`,keepDescription:`仅恢复不存在的项目`,caution:`注意：`,cautionText:`覆盖将用备份数据替换您当前的配置。出于安全考虑，打印机访问码永远不会被覆盖。`,itemsRestored:`已恢复项目`,itemsSkipped:`已跳过项目`,restored:`已恢复`,skipped:`已跳过（已存在）`,filesLabel:`文件（3MF、缩略图等）`,newApiKeysGenerated:`已生成新 API 密钥`,newApiKeysWarning:`这些密钥仅显示一次。请立即复制！`,processingBackup:`处理备份文件中...`,noDataFound:`备份文件中未找到可恢复的数据。`,failedToRestore:`恢复备份失败。请检查文件格式。`},backupExport:{title:`导出备份`,selectData:`选择要包含的数据`,selectAll:`全选`,selectNone:`全不选`,categoryDescriptions:{settings:`语言、主题、更新偏好`,notifications:`ntfy、Pushover、Discord 等`,templates:`自定义消息模板`,smartPlugs:`Tasmota 插座配置`,externalLinks:`侧边栏外部服务链接`,printers:`打印机信息（不含访问码）`,plateDetection:`空打印板参考图像`,filaments:`耗材类型和成本`,maintenance:`自定义维护计划`,archives:`所有打印数据 + 文件（3MF、缩略图、照片）`,projects:`项目、材料清单和附件`,pendingUploads:`虚拟打印机待审核的上传`,apiKeys:`Webhook API 密钥（导入时生成新密钥）`},requiresPrinters:`需要选择打印机`,zipFileWarning:`将创建 ZIP 文件。`,zipFileDescription:`包括所有 3MF 文件、缩略图、延时摄影和照片。这可能需要一些时间并生成较大的文件。`,includeAccessCodes:`包含访问码`,includeAccessCodesDescription:`用于转移到另一台机器`,includeAccessCodesWarning:`访问码将以明文形式包含。请妥善保管此备份文件！`,categoriesSelected:`已选择 {{selectedCount}} 个类别`},pendingUploads:{placeholders:{notes:`添加关于此打印的备注...`},discardUpload:`丢弃上传`,archiveAllUploads:`归档所有上传`,discardAllUploads:`丢弃所有上传`,archive:`归档`,timeAgo:{justNow:`刚刚`,minutesAgo:`{{minutes}} 分钟前`,hoursAgo:`{{hours}} 小时前`,daysAgo:`{{days}} 天前`}},apiBrowser:{placeholders:{requestBody:`JSON 请求体...`,searchEndpoints:`搜索端点...`}},configureAmsSlot:{title:`配置 AMS 槽位`,slotConfigured:`槽位已配置！`,configuringSlot:`正在配置槽位：`,slotLabel:`{{ams}} 槽位 {{slot}}`,searchPresets:`搜索预设...`,colorPlaceholder:`颜色名称或十六进制（例如：棕色、FF8800）`,clearCustomColor:`清除自定义颜色`,noCloudPresets:`无云端预设。登录拓竹云以同步。`,noPresetsAvailable:`无可用预设。登录拓竹云或导入本地配置。`,noMatchingPresets:`未找到匹配的预设。`,custom:`自定义`,builtin:`内置`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`设置已发送到打印机`,filamentProfile:`耗材配置`,kProfileLabel:`K 值配置（压力推进）`,filteringFor:`筛选：{{material}}`,noKProfile:`无 K 值配置（使用默认值 0.020）`,noMatchingKProfiles:`未找到匹配的 K 值配置。将使用默认 K=0.020。`,otherKProfiles:`此打印机上的其他 K 值配置`,selectFilamentFirst:`请先选择耗材配置`,kFromCalibration:`K={{value}}（来自打印机校准）`,customColorLabel:`自定义颜色（可选）`,presetColors:`{{name}} 颜色：`,showLessColors:`显示更少颜色`,showMoreColors:`显示更多颜色`,clear:`清除`,hexLabel:`十六进制：#{{hex}}`,resetting:`重置中...`,resetSlot:`重置槽位`,cancel:`取消`,configuring:`配置中...`,configureSlot:`配置槽位`},githubBackup:{title:`Git 备份`,history:`历史`,downloadBackup:`下载备份`,restoreBackup:`恢复备份`,noBackupsYet:`暂无备份`},emailSettings:{placeholders:{fromName:`Bambuddy`}},tagManagement:{searchTags:`搜索标签...`,renameTag:`重命名标签`,deleteTag:`删除标签`},notificationTemplates:{placeholders:{title:`通知标题...`,body:`通知正文...`}},batchTag:{placeholders:{newTag:`输入新标签...`}},photoGallery:{deletePhoto:`删除照片`},filamentHoverCard:{copySpoolUuid:`复制耗材 UUID`},kProfilesView:{hasNote:`有备注`,copyProfile:`复制配置`},layout:{openMenu:`打开菜单`,noPermissionSystemInfo:`您没有查看系统信息的权限`},dashboard:{dragToReorder:`拖动以重新排列`,hideWidget:`隐藏小部件`},notificationProviderCard:{deleteNotificationProvider:`删除通知提供商`},fileManagerModal:{closeFileManager:`关闭文件管理器`,sortFiles:`排序文件`,goToParentFolder:`返回上级文件夹`,threeView:`3D 视图`},embeddedCameraViewer:{refreshStream:`刷新流`,close:`关闭`,zoomOut:`缩小`,resetZoom:`重置缩放`,zoomIn:`放大`,dragToResize:`拖动调整大小`},timelapseViewer:{skipBack5s:`后退 5 秒`,skipForward5s:`前进 5 秒`},notificationProviders:{descriptions:{email:`SMTP 邮件通知`,telegram:`通过 Telegram 机器人通知`,discord:`通过 Webhook 发送到 Discord 频道`,ntfy:`免费、可自托管的推送通知`,pushover:`简单、可靠的推送通知`,callmebot:`通过 CallMeBot 的免费 WhatsApp 通知`,webhook:`通用 HTTP POST 到任意 URL`}},logViewer:{searchPlaceholder:`搜索消息或日志名称...`,noLogEntries:`未找到日志条目`},switchbarPopover:{noSwitchesInSwitchbar:`切换栏中没有开关`},projectPageModal:{placeholders:{title:`标题`,designer:`设计师`,license:`许可证`,description:`输入描述...`,profileTitle:`配置标题`,profileDescription:`配置描述...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`等待中`,justNow:`刚刚`,now:`现在`,minsAgo:`{{count}} 分钟前`,inMins:`{{count}} 分钟后`,hoursAgo:`{{count}} 小时前`,inHours:`{{count}} 小时后`,daysAgo:`{{count}} 天前`,inDays:`{{count}} 天后`},spoolbuddy:{nav:{dashboard:`仪表板`,ams:`AMS`,inventory:`库存`,writeTag:`写入`,settings:`设置`},status:{nfcReady:`NFC 就绪`,nfcOff:`NFC 关闭`,offline:`离线`,online:`在线`,noPrinters:`无打印机`,deviceOffline:`设备离线`,waitingConnection:`等待设备连接...`,systemReady:`系统就绪`,status:`状态`},dashboard:{readyToScan:`准备扫描`,idleMessage:`将耗材放在秤上以识别`,nfcHint:`NFC 标签将自动读取`,device:`设备`,syncWeight:`同步重量`,weightSynced:`已同步！`,unknownTag:`未知标签`,newTag:`检测到新标签`,onScale:`在秤上`,linkSpool:`链接到耗材`,linkTagTitle:`将标签链接到耗材`,linkTag:`链接标签`,selectSpool:`选择要链接此标签的耗材：`,noUntagged:`未找到没有标签的耗材`,tagDetected:`检测到标签`,noTag:`无标签`,tagId:`标签`,grossWeight:`毛重`,spoolSize:`耗材盘尺寸`,close:`关闭`,currentSpool:`当前耗材`,plateReady:`热床就绪: {{name}}`,plateReadyLabel:`待清理的热床`,plateClearAction:`清理`,plateClearedToast:`已将热床标记为已清理`,plateClearFailed:`无法将热床标记为已清理`},modal:{spoolDetected:`检测到耗材`,assignToAms:`分配到 AMS`,syncWeight:`同步重量`,weightSynced:`已同步！`,syncing:`同步中...`,newTagDetected:`检测到新标签`,addToInventory:`添加到库存`,assignToAmsTitle:`分配到 AMS`,selectSlot:`选择槽位`,assign:`分配`,assigning:`分配中...`,assignSuccess:`已分配！`,assignPendingInsert:`已分配。插入耗材后将配置槽位。`,assignError:`分配耗材失败。请重试。`,noPrinterSelected:`选择打印机...`,noAmsDetected:`此打印机未检测到 AMS`,slot:`槽位`},weight:{noReading:`无读数`,stable:`稳定`,measuring:`测量中...`,tare:`去皮`,calibrate:`校准`},spool:{remaining:`剩余`,material:`材料`,brand:`品牌`,color:`颜色`,coreWeight:`空盘`,labelWeight:`标签`,scaleWeight:`秤重`,netWeight:`净重`,lastUsed:`上次使用`,unknownColor:`未知颜色`},ams:{noData:`未检测到 AMS`,connectAms:`连接 AMS 以查看耗材槽位`,noPrinter:`未选择打印机`,selectPrinter:`从顶部栏选择打印机`,printerDisconnected:`打印机已断开`,humidity:`湿度`,level:`余量`,active:`活跃`,slot:`槽位`,empty:`空`},inventory:{search:`搜索耗材...`,empty:`库存中没有耗材`,noResults:`没有匹配的耗材`,spools:`个耗材`,addSpool:`添加耗材`},settings:{tabDevice:`设备`,tabDisplay:`显示`,tabScale:`秤`,tabUpdates:`更新`,nfcReader:`NFC 读卡器`,type:`类型`,connection:`连接`,notConnected:`不适用`,deviceInfo:`设备信息`,hostname:`主机`,uptime:`运行时间`,systemConfig:`后端与认证`,backendUrl:`Bambuddy 后端 URL`,apiToken:`API 令牌`,apiTokenPlaceholder:`输入 API 令牌`,saveConfig:`保存配置`,systemQueued:`配置已加入队列。`,nfcDiagnostic:`NFC 诊断`,scaleDiagnostic:`秤诊断`,readTagDiagnostic:`读取标签诊断`,testNfc:`测试读卡器`,testScale:`测试精度`,testReadTag:`读取标签`,systemFieldsRequired:`后端 URL 为必填项。`,brightness:`亮度`,saved:`已保存`,noBacklight:`未检测到 DSI 背光。亮度控制需要 DSI 显示屏。`,screenBlank:`屏幕熄灭超时`,screenBlankDesc:`不活动后屏幕关闭。触摸唤醒。`,displayNote:`亮度作为软件滤镜应用。`,scaleCalibration:`秤校准`,currentWeight:`当前重量`,tareOffset:`去皮`,calFactor:`系数`,knownWeight:`已知重量`,calStep1:`移除秤上所有物品并按设置零点。`,calStep2:`将已知重量放在秤上。`,setZero:`设置零点`,calibrateNow:`校准`,calibrated:`已校准`,tareSet:`去皮命令已发送。等待设备响应...`,tareComplete:`去皮完成！`,tareTimedOut:`去皮超时 — SpoolBuddy 守护进程是否正在运行？`,tareFailed:`发送去皮命令失败`,zeroSet:`零点已设置。将已知重量放在秤上。`,calibrationDone:`校准完成！`,calibrationFailed:`校准失败`,lastCalibrated:`上次校准`,stable:`稳定`,settling:`稳定中...`,firmware:`固件`,scale:`秤`,noDevice:`未找到 SpoolBuddy 设备`,daemonVersion:`守护进程版本`,currentVersion:`当前`,versionPending:`等待守护进程...`,checking:`检查中...`,checkUpdates:`检查更新`,updateAvailable:`有可用更新`,updateInstructions:`通过 SSH 更新：运行 SpoolBuddy 安装脚本进行升级。`,upToDate:`已是最新`,includeBeta:`包含测试版本`},writeTag:{tabExisting:`现有耗材`,tabNew:`新耗材`,tabReplace:`替换标签`,searchPlaceholder:`按材料、颜色、品牌搜索...`,noUntaggedSpools:`没有无标签的耗材`,noTaggedSpools:`没有有标签的耗材`,selectSpool:`选择一个耗材，然后将空白 NTAG 放在读卡器上`,placeTag:`将 NTAG 放在读卡器上`,tagReady:`检测到标签 — 准备写入`,writeTag:`写入标签`,replaceTag:`替换标签`,writing:`写入标签中...`,waiting:`等待 SpoolBuddy...`,writeSuccess:`标签写入成功！`,writeFailed:`写入失败`,queueFailed:`排队写入命令失败`,tryAgain:`重试`,cancel:`取消`,replaceWarning:`旧标签将被取消链接。新标签将替换它。`,deviceOffline:`SpoolBuddy 离线`,material:`材料`,colorName:`颜色名称`,color:`颜色`,brand:`品牌`,weight:`重量 (g)`,createSpool:`创建耗材`,creating:`创建中...`,spoolCreated:`耗材已创建！准备写入。`,createFailed:`创建耗材失败`,incompleteDataWarning:`已使用不完整的Spoolman数据写入标签`},quickMenu:{printerPower:`打印机电源`,systemControls:`系统`,restartDaemon:`重启守护进程`,restartBrowser:`重启浏览器`,reboot:`重启`,shutdown:`关机`,swipeToClose:`向下滑动关闭`,confirmTitle:`确认`,confirmShutdown:`确定要关闭SpoolBuddy吗？您需要物理访问才能重新开启。`,confirmReboot:`确定要重启SpoolBuddy吗？`,confirmRestartDaemon:`重启SpoolBuddy守护进程？NFC和秤将暂时不可用。`,confirmRestartBrowser:`重启kiosk浏览器？屏幕将短暂变黑。`,confirm:`确认`,confirmPlugOn:`开启 {{name}}？`,confirmPlugOff:`关闭 {{name}}？`,turnOn:`开启`,turnOff:`关闭`}},diagnostic:{modalTitle:`连接诊断 — {{name}}`,running:`正在运行诊断...`,runningElapsed:`正在运行诊断... ({{elapsed}}秒)`,waitingForReportHint:`正在等待打印机发布状态报告 — 最长可能需要 {{max}} 秒。`,runFailed:`无法运行诊断：{{error}}`,retry:`重新运行`,runButton:`运行诊断`,sectionTitle:`连接诊断`,sectionDescription:`检查打印机无法连接或无法打印的原因 — 端口可达性、LAN 开发者模式、Docker 网络模式和凭据。`,noPrinters:`未配置打印机。`,overall:{ok:`未发现问题 — 打印机连接看起来正常。`,warnings:`打印机应该可以工作，但有些事项需要注意。`,problems:`发现了可解释打印机无法连接或无法打印的问题。`},check:{port_mqtt:{title:`控制端口（MQTT 8883）`,pass:`可达 — 打印机正在接受控制连接。`,fail:`端口 8883 不可达。打印机已关机、IP 地址不同，或被防火墙阻止。请核实打印机 IP，并确保没有任何东西阻止端口 8883。`},port_ftps:{title:`文件传输端口（FTPS 990）`,pass:`可达 — 发送打印文件将正常工作。`,warn:`端口 990 不可达。监控可能仍然有效，但向打印机发送打印任务将失败。请确保端口 990 未被阻止。`,warn_no_tls:`端口 990 已开放，但打印机的文件服务未能完成 TLS 握手。无法获取打印文件、封面图和延时视频，因此归档会保持为空。请重启打印机 — 解除端口封锁无济于事。`},external_storage:{title:`将发送的文件存储在外部存储中（安装步骤 4）`,pass:`打印机报告此选项已开启 — 发送的文件将存储在 SD 卡上，归档将包含缩略图和切片机元数据。`,fail:`打印机报告此选项已关闭。请启用"将发送的文件存储在外部存储中" — 在较新固件 (P2S 01.02 / Bambu Studio 2.6+) 中，开关位于打印机的打印设置中；在较旧版本中位于 Bambu Studio / OrcaSlicer 的设备选项卡中。如果不启用此选项，每次归档的打印都将没有缩略图也没有切片机元数据。`,skip:`未检查 — 需要有效的 MQTT 连接。在该设置仅存在于切片机中的较旧切片机上，打印机不会报告此设置，因此即使选项已关闭，此检查也会通过 — 请手动验证安装步骤 4。`,skip_unsupported_model:`此型号有 SD 卡槽，但无法开启该选项 — 当前 P1 系列固件不会在 Bambu Studio 中显示此开关，且打印机没有屏幕。这里无需修复；在 Bambu Lab 通过固件添加支持之前，存档的打印可能缺少缩略图和切片元数据。`,fail_no_media:`该选项已开启，但打印机的插槽中未检测到存储卡或U盘，发送的文件无处存放。插入一个再打印一次 — 在此之前，每一次归档的打印都会缺少缩略图和切片元数据。`,warn_internal_storage:`该选项已开启且存储介质在位，但上一次打印仍进入了 Bambuddy 无法读取的打印机内部存储。在 H2 系列、P2S 和 X2D 上，无论此选项如何设置，Bambu Studio 的「打印」按钮总是发送到那里。打印会带着名称和时间归档，但没有缩略图和切片元数据。要获得完整归档，请从 Bambuddy 启动打印、改用 OrcaSlicer 切片，或在 Bambu Studio 中用「发送」选择「外部存储」后再启动打印。`,warn_internal_history:`该选项已开启，存储介质也在，但最近一次打印来自打印机里已有的文件 — 从它的屏幕重新打印、从 Handy 启动，或是先前发送过的文件。这个文件库位于 Bambuddy 读不到的内部存储中，而且任何设置都改变不了，因为那次打印根本没有发送过文件。它仍会带着名称和时间归档，但没有缩略图和切片元数据。要获得完整归档，请从 Bambuddy 启动打印，或从切片软件发送。`},port_rtsps:{title:`摄像头端口（{{protocol}} {{port}}）`,pass:`可达 — 摄像头视频流将正常工作。`,warn:`端口 {{port}} 不可达。实时摄像头视图将无法工作。这不影响打印。`},macos_local_network:{title:`macOS 本地网络权限`,pass:`macOS 已允许 Bambuddy 访问本地网络。`,warn_unsigned:`运行 Bambuddy 的 Python 没有代码签名，macOS 因此无法将本地网络权限绑定到任何身份，会静默丢弃所有到打印机的连接——既没有错误，也不会弹出授权提示。请运行会完成签名的 Bambuddy 更新脚本 (install/update_macos.sh)，然后重启 Bambuddy。解释器：{{executable}}`,warn_permission:`如果打印机已开机并可通过该地址访问，请打开 系统设置 > 隐私与安全性 > 本地网络，确认 Bambuddy 使用的 Python 已启用。未启用时 macOS 会静默丢弃本地连接，而且升级 Python 可能不会保留原有授权。`},network_mode:{title:`容器网络模式`,genericRuntime:`容器`,pass:`正在 {{runtime}} 中以 host 网络运行。`,warn:`Bambuddy 正在 {{runtime}} 中以 bridge 网络运行。打印机发现和虚拟打印机需要 host 网络 — 请使用 host 网络重新创建容器（docker-compose 中为 "network_mode: host"，Podman 中为 "--network=host"）。`,skip:`未在容器中运行 — 不适用。`,skip_unknown:`Bambuddy 正在 {{runtime}} 中运行，但无法确定其网络模式。如果打印机发现或虚拟打印机无法使用，请使用 host 网络重新创建容器。`,skip_system_container:`Bambuddy 正在 {{runtime}} 系统容器中运行，它像虚拟机一样直接位于局域网中 — 不适用。`},subnet:{title:`网络子网`,pass:`打印机和 Bambuddy 位于同一子网。`,warn:`打印机（{{printer_ip}}）和 Bambuddy（{{host_ip}}）位于不同的子网。除非配置了子网之间的路由，否则它们可能无法相互访问。`,skip:`无法确定子网 — 已跳过。`},mqtt_auth:{title:`打印机凭据`,pass:`打印机已接受连接。`,fail:`打印机可达，但 Bambuddy 未与其建立连接。访问代码或序列号很可能有误 — 每次切换仅局域网模式或开发者模式时访问代码都会更改，请从打印机屏幕重新复制。正在重启或已达到同时连接数上限的打印机看起来也是这样。`,fail_auth_rejected:`打印机拒绝了 Bambuddy 的凭据。访问代码或序列号有误 — 每次切换仅局域网模式或开发者模式时访问代码都会更改。请从打印机屏幕重新复制，并保存到打印机设置中。`,skip:`未检查 — 无法连接到打印机。`},developer_mode:{title:`LAN 开发者模式`,pass:`开发者模式已启用。`,fail:`打印机上的开发者模式已关闭。请在打印机的 LAN 设置中启用它 — 并按 OK 确认。否则打印将无法开始。`,skip:`无法检查 — 需要与打印机的实时连接。`},printer_publishing:{title:`打印机正在发布状态`,pass:`打印机正在发布状态更新 — AMS、耗材和 K 配置将正确镜像到切片软件。`,fail:`MQTT 代理已接受连接，但打印机未发布任何状态报告。这几乎总是因为序列号错误或大小写不一致 — device/<serial>/report 主题区分大小写。请将打印机设置中的序列号与打印机屏幕上的显示进行核对。`,skip:`无法检查 — 需要与打印机的实时连接。`}}},systemHealth:{sectionTitle:`系统健康`,sectionDescription:`扫描最近的日志以发现已知问题，在它们演变成支持工单之前，通常你可以自行解决。`,rescan:`重新扫描`,clean:`在最近 {{times}} 条日志中未发现已知问题。`,logUnavailable:`文件日志记录已禁用，因此无法扫描日志。请启用文件日志以使用此检查。`,learnMore:`如何解决`,fixLabel:`解决方法：`,occurrences:`出现 {{times}} 次 — 最近一次 {{lastSeen}}`,category:{layer8:`你可以自行解决`,environment:`环境`,bug:`请反馈此问题`},signature:{"ftp-auth-rejected":{name:`打印机拒绝了访问码`,cause:`打印机拒绝了文件传输登录。访问码错误，或在切换开发者模式后已更改。`,fix:`从打印机屏幕（局域网设置）重新复制访问码，并在 Bambuddy 的打印机设置中更新它。`},"ftp-connection-timeout":{name:`文件传输连接超时`,cause:`Bambuddy 无法连接打印机的文件传输端口（FTPS 990）。该端口被阻止，或打印机已关机或位于其他子网。`,fix:`请确保 Bambuddy 与打印机之间的 990 端口未被阻止，并且两者位于同一网络。`},"ftp-ssl-error":{name:`安全文件传输握手失败`,cause:`打印机的文件服务在 990 端口上没有使用 TLS 响应。其文件服务器已卡死，这是打印机侧的故障，与防火墙或固件无关。`,fix:`请重启打印机。在此之前无法获取打印文件、封面图和延时视频；打印本身不受影响。`},"bambu-cloud-captcha":{name:`Bambu Cloud 要求进行 CAPTCHA 验证`,cause:`Bambu 的防滥用机制正在验证此网络，因此无法完成 Bambu Cloud 登录。这与公网 IP 地址有关，与你的账号或此安装无关。`,fix:`请等待：通常几小时后会自动解除，反复登录只会延长时间。在此期间，可使用从浏览器会话中获取的访问令牌登录。`},"mqtt-connection-flapping":{name:`打印机连接反复断开`,cause:`控制连接（MQTT 8883）反复断开并重连——通常是网络信号弱或端口被部分阻止所致。`,fix:`请检查打印机附近的 Wi-Fi 信号，尽量使用有线连接，并确保 8883 端口能够稳定连接。`},"camera-connection-refused":{name:`无法访问摄像头视频流`,cause:`无法在 RTSPS 322 端口连接实时摄像头。该端口被阻止，或打印机上的摄像头或局域网实时画面已关闭。`,fix:`请在打印机上启用摄像头和局域网实时画面，并确保 322 端口未被阻止。这不会影响打印。`},"database-locked":{name:`数据库写入冲突`,cause:`在负载下 SQLite 数据库出现 "database is locked" 错误——同时使用多台打印机时较为常见。`,fix:`请将 Bambuddy 切换到外部 PostgreSQL 数据库。参见文档中的 PostgreSQL 指南。`}}},vpDiagnostic:{title:`设置检查 — {{name}}`,runButton:`运行设置检查`,running:`正在运行设置检查...`,runFailed:`无法运行设置检查：{{error}}`,retry:`重新运行`,overall:{ok:`所有检查均已通过 — 此虚拟打印机已正确设置。`,warnings:`虚拟打印机应该可以工作，但有些方面需要注意。`,problems:`发现的问题可以解释切片软件为何无法看到或使用此虚拟打印机。`},check:{enabled:{title:`虚拟打印机已启用`,fail:`此虚拟打印机已关闭。请将其打开以使其可被发现。`},running:{title:`服务正在运行`,fail:`虚拟打印机已启用，但其服务未运行。请检查 Bambuddy 日志 — 通常是绑定 IP 冲突或权限错误使其停止。`},bind_interface:{title:`绑定网络接口`,fail:`绑定接口未设置，或在此主机上已不存在。请在"绑定接口"下拉菜单中选择一个当前的接口。`},access_code:{title:`已设置访问码`,fail:`未设置访问码。必须向切片软件提供与您在此处设置的相同的 8 位访问码。`},target_printer:{title:`目标打印机`,fail:`未选择目标打印机。代理模式需要一台实际的打印机进行转发。`,warn:`目标打印机当前处于离线状态 — 重新连接后将恢复转发。`},port_ftps:{title:`文件上传服务（端口 {{port}}）`,fail:`绑定 IP 的端口 {{port}} 上没有任何监听，因此切片软件无法上传文件。通常是此接口上的端口冲突所致。`},port_mqtt:{title:`控制服务（端口 {{port}}）`,fail:`绑定 IP 的端口 {{port}} 上没有任何监听，因此切片软件无法连接或显示状态。`},port_bind:{title:`发现服务（端口 {{port}}）`,fail:`绑定 IP 的端口 {{port}} 上没有任何监听，因此切片软件的发现握手会失败。`},privileged_ports:{title:`特权端口绑定`,fail:`端口 {{port}} 低于 1024，而此服务没有绑定它的权限，这正是上面没有任何监听的原因。请在 /etc/systemd/system/bambuddy.service 中添加 AmbientCapabilities=CAP_NET_BIND_SERVICE 并重启，或运行 "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))"。使用 Docker 时请添加 cap_add: [NET_BIND_SERVICE]。`},certificate:{title:`TLS 证书`,pass:`证书已就绪。请确保已将 Bambuddy CA 证书（上方）导入切片软件的信任库。`,fail:`此虚拟打印机的 TLS 证书缺失。请检查 Bambuddy 数据目录是否可写。`}}},bugReport:{logHealthSummary:`在你的日志中发现了已知问题`,logHealthIntro:`最近的日志与已知问题相符。请查看下方的解决方法——解决它们可能无需提交错误报告即可解决你的问题。你仍然可以在下方提交报告。`,title:`报告错误`,description:`描述`,descriptionPlaceholder:`出了什么问题？请描述问题...`,email:`邮箱（可选）`,emailPlaceholder:`your@email.com`,emailPrivacy:`如果提供，您的邮箱将包含在GitHub Issue的折叠部分中，以便维护者后续跟进。`,screenshot:`截图`,uploadOrPaste:`上传、粘贴或拖拽图片`,dataCollectedSummary:`报告中包含哪些数据？`,dataIncluded:`包含：`,dataIncludedList:`应用版本、操作系统、架构、Python版本、数据库统计（仅计数）、打印机型号、喷嘴数量、固件版本、连接状态、集成状态（Spoolman、MQTT、HA）、非敏感设置、网络接口数量、Docker详情、依赖版本。`,dataNeverIncluded:`绝不包含：`,dataNeverIncludedList:`打印机名称、序列号、访问代码、密码、IP地址、邮箱地址、API密钥、令牌、Webhook URL、主机名或用户名。`,submit:`提交`,startLogging:`开始调试日志`,stepEnableLogging:`调试日志已启用`,stepReproduce:`请现在重现问题`,stepStopLogging:`停止并提交报告`,stopAndSubmit:`停止并提交`,maxDuration:`{{minutes}}分钟后自动停止`,stoppingLogs:`正在收集日志并提交...`,submitting:`正在提交错误报告...`,submittingStepConnection:`正在执行打印机连接性检查`,submittingStepVirtualPrinters:`正在执行虚拟打印机设置检查`,submittingStepLogScan:`正在扫描最近的日志以查找已知问题`,submittingStepSubmit:`正在将报告提交至 GitHub`,submitSuccess:`错误报告提交成功！`,submitFailed:`提交错误报告失败`,diagnosticChecking:`正在检查打印机连接...`,diagnosticHealthy:`连接检查通过 — 未在您的打印机上发现问题。`,diagnosticSummary:`{{total}} 台打印机中有 {{problems}} 台存在连接问题`,diagnosticIntro:`一台或多台打印机存在连接问题，可能正是您遇到问题的原因。请展开下方的打印机查看解决方法 — 解决它也许无需提交错误报告即可解决问题。您仍然可以在下方提交报告。`,thankYou:`谢谢！`,submitted:`您的错误报告已提交。`,viewIssue:`查看Issue`,closeKeepsRecording:`重现问题时可以关闭此面板——记录会继续进行，重新打开后会回到这一步。`,resumeRecording:`错误报告记录中 — {{elapsed}}。点击以完成。`,resumeReport:`继续报告`,unexpectedError:`发生了意外错误`},failureDetection:{title:`AI 故障检测`,description:`通过自托管的 Obico ML API 监控打印,并对检测到的故障自动采取行动。`,mlUrl:`Obico ML API 地址`,mlUrlHint:`您自托管的 Obico ml_api 容器的基础 URL(例如 http://192.168.1.10:3333)。`,mlToken:`ML API 令牌（可选）`,mlTokenPlaceholder:`如果服务器未设置 ML_API_TOKEN，请留空`,mlTokenHint:`必须与您的 Obico ml_api 容器的 ML_API_TOKEN 环境变量一致。如果容器未使用令牌，请留空。`,test:`测试`,testSuccess:`ML API 可访问且正常。`,testSuccessTokenUnknown:`ML API 可访问且正常。无法验证令牌。`,testFailed:`无法访问 ML API。`,sensitivity:`灵敏度`,sensitivityLow:`低(减少误报)`,sensitivityMedium:`中(平衡)`,sensitivityHigh:`高(更早检测,更多误报)`,sensitivityHint:`调整触发警告和故障的置信度阈值。`,action:`检测到故障时的操作`,actionNotify:`仅通知`,actionPause:`暂停打印`,actionPauseOff:`暂停并切断电源`,pollInterval:`检查间隔(秒)`,pollIntervalHint:`打印过程中每台打印机的检查频率。最小 5 秒,最大 120 秒。`,externalUrlMissing:`未设置外部 URL。`,externalUrlHint:`ML API 通过 URL 获取摄像头快照。请在通用设置中设置外部 URL，以便 ML API 容器可以访问 Bambuddy。`,perPrinterTitle:`监控的打印机`,perPrinterHint:`选择检测服务要监视哪些打印机。`,monitorAll:`监控所有已连接的打印机`,statusTitle:`状态`,serviceRunning:`服务运行中`,thresholds:`低 / 高阈值`,activePrinters:`活动打印`,noActivePrints:`当前没有正在进行的打印。`,historyTitle:`最近检测`,noHistory:`暂无检测记录。`},makerworld:{title:`MakerWorld`,description:`粘贴 MakerWorld 模型链接，即可直接在 Bambuddy 中导入并打印 —— 无需切换到 Bambu Handy 应用。`,pasteUrlHeader:`从 MakerWorld 导入`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… 或粘贴任意 MakerWorld 链接`,resolveButton:`解析`,signInRequiredTitle:`下载需要登录 Bambu Cloud`,signInRequiredBody:`您可以匿名浏览模型详情，但下载 3MF 文件需要 Bambu Cloud 账户。`,signInExpiredTitle:`Bambu Cloud 登录已过期`,signInExpiredBody:`您仍处于 Bambuddy 的登录状态，但 Bambu Lab 已不再接受已保存的令牌，因此下载会失败。请重新登录 Bambu Cloud。`,openCloudSettings:`打开云设置`,untitledModel:`无标题模型`,byCreator:`作者: {{name}}`,downloadsCount:`{{count}} 次下载`,licensePrefix:`许可协议`,alreadyImported:`已在资料库中`,openOnMakerworld:`在 MakerWorld 中打开`,alreadyInLibrary:`此模型已在您的资料库中 —— 可在文件管理器 → MakerWorld 中找到`,importSuccess:`已导入 {{filename}} —— 已保存到文件管理器 → MakerWorld`,platesHeader:`打印板 ({{count}})`,plateDefaultName:`打印板 {{n}}`,materialCount:`{{count}} 种耗材`,amsRequired:`需要 AMS`,slicedFor:`为 {{printer}} 切片`,alsoCompatible:`还标记为兼容：{{printers}}`,importToLibrary:`保存`,sliceIn:`保存并在 {{slicer}} 中切片`,disclaimer:`MakerWorld 集成使用由社区记录的 API 接口。Bambuddy 与 MakerWorld 或 Bambu Lab 没有从属或认可关系。`,lastImportSuccess:`已导入到您的资料库`,lastImportAlreadyInLibrary:`已存在于您的资料库中`,viewInLibrary:`在文件管理器中查看`,openInBambuStudio:`在 Bambu Studio 中打开`,openInOrcaSlicer:`在 OrcaSlicer 中打开`,importTo:`导入到文件管理器`,recentImportsHeader:`最近导入`,phaseResolving:`解析中`,phaseDownloading:`下载中`,folderAuto:`MakerWorld (默认)`,importAll:`全部导入`,importAllProgress:`正在导入 {{current}}/{{total}}`,openGallery:`打开图片库`,galleryPrev:`上一张`,galleryNext:`下一张`,deleteImport:`从资料库中移除`,importDeleting:`正在移除…`,importDeleted:`已从资料库中移除`,confirmDelete:`从资料库中移除 {{filename}}？本地文件将被删除，但可以从 MakerWorld 重新导入。`,errors:{resolveFailed:`无法解析该 MakerWorld 链接。`,downloadFailed:`下载失败。请重试。`,deleteFailed:`无法从资料库中移除文件。`}},gcodeViewer:{filamentSlot:`耗材 {{n}}`,loading:`正在读取走刀路径…`,loadFailed:`无法加载此文件的 G-code。`,showTravel:`空驶移动`,topLayer:`顶层`,bottomLayer:`底层`,noSource:`未指定要预览的文件。`,view:{filament:`耗材`,feature:`类型`,height:`高度`,width:`宽度`},feature:{wall:`墙体`,sparseInfill:`稀疏填充`,solidInfill:`实心填充`,bridge:`桥接 / 悬垂`,support:`支撑`,skirt:`裙边 / 边缘`,gapFill:`间隙填充`,ironing:`熨烫`,primeTower:`擦料塔`},back:`返回`,backToArchives:`返回打印归档`,backToFiles:`返回文件管理器`,plates:`板`,plateN:`板 {{n}}`},libraryTrash:{title:`回收站`,headerButton:`回收站`,headerTooltip:`查看已移至回收站的文件`,backToFiles:`返回文件管理器`,subtitleAdmin:`已删除的文件会在回收站保留 {{days}} 天，之后自动删除。此视图显示所有用户的回收站。`,subtitleUser:`已删除的文件会在回收站保留 {{days}} 天，之后自动删除。`,loading:`正在加载回收站…`,loadError:`无法加载回收站。`,empty:`回收站为空。`,summary:`{{count}} 个文件 · {{size}}`,emptyTrash:`清空回收站`,restore:`还原`,purgeNow:`立即删除`,autoPurgeIn:`将于 {{when}} 自动删除`,days:`天`,retentionLabel:`自动删除时间`,selectAll:`全选`,selectOne:`选择 {{filename}}`,selectionCount:`已选择 {{count}} 项`,bulkRestore:`还原所选`,bulkPurge:`删除所选`,col:{filename:`文件`,folder:`文件夹`,size:`大小`,deleted:`移入回收站`,autoPurge:`自动删除`,owner:`所有者`,actions:`操作`},confirm:{purgeTitle:`永久删除？`,purgeBody:`{{filename}} 将从磁盘中删除，无法恢复。`,emptyTitle:`清空回收站？`,emptyBody:`全部 {{count}} 个文件将从磁盘中删除。此操作无法撤消。`,bulkPurgeTitle:`永久删除所选文件？`,bulkPurgeBody:`所选的 {{count}} 个文件将从磁盘中删除，无法恢复。`,cta:`永久删除`},toast:{restored:`文件已还原。`,restoreFailed:`无法还原文件。`,purged:`文件已永久删除。`,purgeFailed:`无法删除文件。`,emptied:`已从回收站删除 {{count}} 个文件。`,emptyFailed:`无法清空回收站。`,retentionSaved:`自动删除已设置为 {{days}} 天。`,retentionFailed:`无法保存保留设置。`,bulkRestored:`已还原 {{count}} 个文件。`,bulkPurged:`已删除 {{count}} 个文件。`}},libraryPurge:{title:`清理旧文件`,headerButton:`清理旧文件`,headerTooltip:`批量将旧文件移至回收站`,description:`早于所选阈值的文件将被移至回收站。外部文件夹会被跳过。在自动删除之前，您可以从回收站还原文件。`,ageLabel:`移动早于以下天数的文件`,days:`天`,includeNeverPrinted:`包括从未打印过的文件`,effectsTitle:`点击清除时会发生什么`,effect1:`匹配的文件移至回收站 — 尚未从磁盘删除。`,effect2:`在保留期到期之前，您可以随时从回收站恢复。`,effect3:`保留期满后，回收站清理器将它们从磁盘永久删除。`,effect4:`外部（链接）文件夹中的文件将被跳过 — Bambuddy 从不删除不属于自己的字节。`,previewLoading:`正在检查匹配的文件数量…`,previewFailed:`无法预览清理结果。`,previewSummary:`{{count}} 个文件 · {{size}} 将被移至回收站`,andMore:`…还有 {{count}} 个`,warning:`文件将被软删除——在保留期结束前，您可以从回收站还原它们。`,confirmCta:`将 {{count}} 个移至回收站`,purging:`正在移至回收站…`,toast:{success:`已将 {{count}} 个文件移至回收站。`,failed:`无法清理文件。`}},libraryAutoPurge:{enableLabel:`自动清理旧文件`,enableDescription:`每天执行一次管理员清理。文件会先进入回收站——不会立即删除。`,ageLabel:`自动清理早于以下天数的文件`,ageDescription:`最少 7 天，最多 10 年。使用与手动「清理旧文件」按钮相同的时间规则。`,days:`天`,includeNeverPrinted:`包括从未打印过的文件`,saveFailed:`无法保存自动清理设置。`},archivePurge:{headerButton:`清除旧条目`,headerTooltip:`批量删除旧归档`,title:`清除旧归档`,description:`清除旧的打印历史。每个归档按其最近一次打印完成时间老化 — 重新打印归档会刷新其年龄，因此活跃工作永远不会被清除。`,ageLabel:`删除最近未打印的归档：`,days:`天`,effectsTitle:`点击清除时会发生什么`,effect1:`每个匹配的归档将从列表中隐藏，其磁盘文件（3MF、缩略图、延时摄影、源 3MF、F3D、照片）也将被删除。`,effect2:`数据库中的归档记录将被保留，因此 Quick Stats 仍可计入耗材、时间、成本和能耗的贡献 — 与单条删除的默认行为一致。`,effect3:`勾选下方"同时从统计中移除"可一并清除 Quick Stats 中的贡献（与单条删除选项等同）。该操作不可撤销。`,effect4:`重新打印归档会刷新其使用计时器，因此仍在使用的归档不会被清除。`,purgeStatsLabel:`同时从统计中移除`,purgeStatsHint:`从 Quick Stats（耗材、时间、成本、能耗）中移除匹配的归档。不勾选时，Quick Stats 保留所有贡献，仅文件从磁盘删除。`,previewLoading:`检查匹配的归档数量…`,previewFailed:`无法预览清除。`,previewSummary:`将移除 {{count}} 个归档 · {{size}}`,andMore:`…还有 {{count}} 个`,warning:`文件将从磁盘删除且无法恢复。继续前请下载或收藏您想保留的内容。`,confirmCta:`移除 {{count}} 个归档`,purging:`移除中…`,toast:{success:`已移除 {{count}} 个归档。`,failed:`无法清除归档。`}},archiveAutoPurge:{enableLabel:`自动清除旧归档`,enableDescription:`每天一次，将阈值内未打印的归档从列表中隐藏，并从磁盘中删除其文件。重新打印会重置计时器。`,ageLabel:`自动删除最近未打印的归档：`,ageDescription:`最少 7 天，最多 10 年。基于最近一次打印完成 — 重新打印会刷新年龄。删除 3MF、缩略图、延时摄影、源 3MF、F3D 和照片。`,days:`天`,purgeStatsLabel:`同时从统计中移除`,purgeStatsDescription:`启用后，每日清理任务还会将每个被清除的归档从 Quick Stats（耗材、时间、成本、能耗）中移除。默认关闭 — Quick Stats 保留贡献，仅文件从磁盘删除。`,runNow:`立即清除归档`,saveFailed:`无法保存自动清除设置。`},cameraTokens:{scope:{camera_stream:`摄像头视频流`,camwall:`摄像头墙`,overlay:`直播叠加层`},title:`摄像头 API 令牌`,navTitle:`摄像头 API 令牌`,description:`长期令牌，用于将摄像头视频流嵌入 Home Assistant、Frigate、自助展示屏或其他需要稳定网址的工具。权限范围在创建时选择，令牌可随时撤销。`,loading:`加载中…`,confirmRevoke:{title:`撤销此令牌？`,body:`使用「{{name}}」的任何设备将立即失去访问权限。此操作无法撤销。`,cancel:`取消`,confirm:`撤销`},create:{scopeLabel:`权限范围`,hintCameraStream:`摄像头视频流令牌只能获取摄像头视频流和快照。适用于 Home Assistant、Frigate 或任何嵌入单个摄像头的场景。`,hintCamWall:`摄像头墙令牌可在无需登录的屏幕上打开 /camwall，能看到每台打印机的名称和状态以及摄像头视频流，但看不到文件名、地址或访问码。`,hintOverlay:`直播叠加层令牌可在无需登录的屏幕上打开 /overlay/{printerId}——供 OBS 或任何直播使用。它能看到一台打印机的摄像头视频流以及实时打印状态，包括屏幕上显示的文件名，但看不到地址或访问码。`,title:`创建新令牌`,nameLabel:`令牌名称`,namePlaceholder:`例如 Home Assistant`,daysLabel:`过期天数`,submit:`创建`,hint:`最大有效期 365 天。令牌值仅在创建时显示一次 — 请立即复制。`},created:{camWallUrlTitle:`此屏幕的摄像头墙网址`,camWallUrlHint:`在屏幕上打开此网址。任何能看到该网址的人都能观看摄像头墙，请像对待钥匙一样对待它——撤销令牌即可切断该屏幕的访问。`,overlayUrlTitle:`用于 OBS 的叠加层网址`,overlayUrlHint:`在 OBS 中将其添加为“浏览器”源（Browser Source）。将 /overlay/1 中的数字改为您打印机的编号（可在“打印机”页面的网址中查看）。任何能看到该网址的人都能观看直播，请像对待钥匙一样对待它——撤销令牌即可切断访问。`,title:`令牌已创建 — 立即复制`,warning:`这是此令牌唯一一次可见。关闭此对话框后您将无法再次查看。`,copy:`复制`,dismiss:`我已保存`},list:{scope:`权限范围`,myTitle:`我的令牌`,allTitle:`所有用户（管理员视图）`,empty:`暂无令牌。`,name:`名称`,owner:`所有者`,prefix:`前缀`,created:`创建时间`,expires:`过期时间`,lastUsed:`最近使用`,revoke:`撤销`,expired:`已过期`},toast:{created:`令牌已创建`,createFailed:`创建令牌失败`,revoked:`令牌已撤销`,revokeFailed:`撤销令牌失败`,loadFailed:`加载令牌失败`,copied:`已复制到剪贴板`,copyFailed:`复制失败 — 手动选择并复制`}},forecast:{title:`库存预测`,noSpools:`未找到活跃的料卷。请将料卷添加到库存中以查看预测数据。`,noUsageData:`无可用使用数据 — 无法预测库存时间线。`,sku:`SKU`,material:`材料`,stock:`库存`,dailyRate:`消耗率`,daysLeft:`剩余天数`,emptyBy:`耗尽日期`,reorderBy:`补货截止日`,actions:`操作`,trend:`趋势`,estimated:`估算`,noData:`无数据`,timeframe:`时间范围`,chartTitle:`库存预测 — 前5种材料`,dashedLinesROP:`虚线 = 再订货点`,stockLevel:`库存量`,reorderPoint:`再订购点`,safetyMargin:`安全余量`,trendLegend:`趋势（基于历史，95%服务水平）`,estimatedLegend:`估算（重量差值）`,noDataLegend:`无数据`,ropLabel:`再订货点`,ssLabel:`安全库存`,safetyStockLegend:`安全库存`,stockArrivalLegend:`到货`,stockoutLegend:`断货`,alertCount_one:`{{count}}条警告`,alertCount_other:`{{count}}条警告`,order:`订购`,globalLeadTime:`全局交货期`,globalLeadTimeHint:`全局交货期下限 — 用于所有 SKU 的再订购点计算`,save:`保存`,cancel:`取消`,settingsSaved:`设置已保存`,failedSaveSettings:`保存设置失败`,globalLeadTimeSaved:`全局提前期已保存`,skuLeadTimeOverride:`SKU 交货期覆盖`,skuLeadTimeHint:`0 = 使用全局交货期。设置 >0 以覆盖此 SKU。`,safetyMarginLabel:`安全余量`,effectiveLeadTime:`有效交货期`,effectiveLeadTimeHint:`max(全局 {{global}}天, SKU {{sku}}天)`,reorderPointHint:`d̄ × LT + safety margin — 当库存降至此水平时下单`,safetyMarginHint:`统计安全库存 (z=1.65 × σ × √LT) + 用户自定义缓冲`,safetyMarginHintDays:`在统计安全库存基础上额外增加的缓冲。{{approx}}`,safetyMarginHintDaysApprox:` ≈ 按当前速率 {{g}}g。`,safetyMarginHintG:`在统计安全库存基础上增加的固定重量缓冲。{{approx}}`,safetyMarginHintGApprox:` ≈ 按当前速率 {{days}}天。`,individualSpools:`单个料卷`,labelWeight:`标注重量`,spoolCount_one:`{{count}}个线轴`,spoolCount_other:`{{count}}个线轴`,stockBreakRisk:`断货风险`,stockBreakBefore:`补货前库存断档`,stockBreakDetail:`剩余 {{days}} 天，交货期 {{lt}} 天。`,reorderNow:`立即补货`,reorderTriggerPassed:`触发日期 {{date}} 已过。`,shoppingList:`购物清单`,shoppingListItems_one:`（{{count}}项）`,shoppingListItems_other:`（{{count}}项）`,shoppingListEmpty:`购物清单为空。点击任意行的购物车图标以添加商品。`,addToCart:`添加到购物清单`,alertsSnoozed:`静音此SKU的提醒`,alertsEnabled:`启用此SKU的提醒`,addedToCart:`已添加到购物清单`,failedAddItem:`添加项目失败`,listView:`列表`,logisticsView:`物流`,qty:`数量`,weight:`重量`,leadTime:`交货期`,expectedRestock:`预计补货日期`,status:`状态`,note:`备注`,pending:`待处理`,purchased:`已购买`,received:`已收货`,markPurchased:`标记为已购买`,markReceived:`标记为已收货 — 将料卷添加到库存`,resetToPending:`重置为待处理`,remove:`移除`,clearAll:`清空`,downloadCsv:`CSV`,addToCartTitle:`添加到购物清单`,byQuantity:`按数量`,byDuration:`按时长`,numberOfSpools:`线轴数量`,lastHowManyDays:`需要持续多少天？`,noUsageQty:`无使用数据 — 数量已设为1。`,noteOptional:`备注（可选）`,notePlaceholder:`例如：用于项目X，紧急…`,addNSpools_one:`添加{{count}}个线轴`,addNSpools_other:`添加{{count}}个线轴`,onArrival:`到货时`,stockBreakIn:`{{days}} 天后断货。`,stockRunsOutBefore:`库存在 {{lt}} 天交货期结束前耗尽。`,atRate:`按 {{rate}}g/天的速度，您需要`,moreSpools_one:`再{{count}}个线轴`,moreSpools_other:`再{{count}}个线轴`,bridgeGap:`来弥补缺口。`,noReadAccess:`您没有查看库存预测的权限。`,noWriteAccess:`您没有修改预测设置的权限。`}}},"zh-TW":{translation:{nav:{printers:`印表機`,archives:`歸檔`,queue:`列印佇列`,stats:`統計`,profiles:`設定檔案`,maintenance:`維護`,projects:`專案`,finance:`財務`,inventory:`耗材`,files:`檔案管理器`,makerworld:`MakerWorld`,notifications:`通知`,settings:`設定`,system:`系統`,collapseSidebar:`收起側邊欄`,expandSidebar:`展開側邊欄`,update:`更新`,updateAvailable:`有可用更新：v{{version}}`,updateAvailableBanner:`版本 {{version}} 已發布！`,viewUpdate:`檢視更新`,viewOnGithub:`在 GitHub 上檢視`,keyboardShortcuts:`鍵盤快捷鍵 (?)`,switchToLight:`切換到淺色模式`,switchToDark:`切換到深色模式`,switchToSystem:`切換到系統模式`,smartSwitches:`智慧開關`,logout:`登出`,installApp:`安裝應用程式`,installAppSuccess:`Bambuddy 已安裝`},common:{plusNMore:`另 {{count}} 個`,save:`儲存`,saving:`儲存中...`,cancel:`取消`,delete:`刪除`,edit:`編輯`,add:`新增`,close:`關閉`,confirm:`確認`,loading:`載入中...`,error:`錯誤`,errorLoading:`載入錯誤`,retry:`重試`,success:`成功`,warning:`警告`,enabled:`已啟用`,disabled:`已停用`,yes:`是`,no:`否`,on:`開`,off:`關`,all:`全部`,none:`無`,search:`搜尋`,filter:`篩選`,sort:`排序`,refresh:`重新整理`,download:`下載`,upload:`上傳`,uploading:`上傳中...`,uploadFailed:`上傳失敗`,actions:`操作`,status:`狀態`,name:`名稱`,description:`描述`,date:`日期`,time:`時間`,hours:`小時`,minutes:`分鐘`,seconds:`秒`,days:`天`,enable:`啟用`,disable:`停用`,permissions:`權限`,noPrinters:`未設定印表機`,noData:`尚無資料`,linkNotFound:`未找到連結`,required:`必填`,optional:`可選`,dismiss:`關閉`,apply:`套用`,reset:`重設`,export:`匯出`,import:`匯入`,clear:`清除`,selectAll:`全選`,deselectAll:`取消全選`,noChange:`— 不更改 —`,unchanged:`未更改`,unassigned:`未分配`,unknown:`未知`,unknownError:`未知錯誤`,today:`今天`,tomorrow:`明天`,asap:`儘快`,overdue:`已逾期`,now:`現在`,collapse:`收起`,expand:`展開`,previous:`上一頁`,next:`下一頁`,viewArchive:`檢視歸檔`,viewInFileManager:`在檔案管理器中檢視`,addedBy:`由 {{username}} 新增`,prints:`次列印`,more:`還有 {{count}} 個`,ascending:`升序`,descending:`降序`,back:`返回`,copy:`複製`,copied:`已複製!`,printer:`印表機`,remove:`移除`,type:`類型`,print:`列印`,rename:`重新命名`,move:`移動`,create:`建立`,duplicate:`複製`,left:`左`,right:`右`,user:`使用者`,run:`執行`,running:`執行中...`},finance:{allTypes:`所有類型`,allCostCenters:`所有成本中心`,title:`財務`,subtitle:`錢包、個人交易和成本中心`,noAccess:`您沒有權限查看財務資料。`,personalView:`個人檢視`,adminView:`管理員檢視`,createCostCenter:`建立成本中心`,adjustWallet:`調整錢包`,addManualPrint:`新增手動列印`,manageMembers:`管理成本中心成員`,currentBalance:`個人餘額`,transactions:`交易`,personalTransactions:`個人交易`,costCenters:`成本中心`,availableForPrinting:`可用於列印分配`,costCenterName:`名稱`,budgetType:`預算類型`,monthlyBudget:`月度預算`,totalBudget:`總預算`,noBudget:`無預算`,create:`建立`,selectUser:`選擇使用者`,transactionType:`類型`,amount:`金額`,noCostCenter:`無成本中心`,descriptionOptional:`說明（可選）`,applyAdjustment:`套用調整`,memberCanPrint:`成員可以列印`,addMember:`新增成員`,canPrint:`可以列印`,noMembers:`未分配任何成員。`,editCostCenter:`編輯成本中心`,myCostCenters:`我的成本中心`,costCentersHint:`檢視預算限制並將成本保持在控制範圍內`,noCostCenters:`未找到成本中心。`,owner:`擁有者`,balance:`帳戶餘額`,unlimited:`無限制`,budgetPolicyHint:`帳戶餘額用於記錄成本。列印僅受所選成本中心預算限制；未設定預算時不受限制。`,budget:`預算`,shared:`共用`,cannotEditPrivateCostCenter:`無法在此處編輯私人成本中心`,recentTransactions:`最近的交易`,transactionsHint:`按類型和成本中心篩選，然後瀏覽頁面`,first:`首頁`,prev:`上一頁`,next:`下一頁`,last:`末頁`,pageNumberOf:`第 {{page}} 頁，共 {{total}} 頁`,noTransactions:`沒有可用的交易。`,noTransactionsForFilter:`沒有交易符合選定的篩選條件。`,costCenter:`成本中心`,balanceAfter:`調整後餘額`,userWithId:`使用者 #{{id}}`,partial:`部分`,editTransaction:`編輯交易`,selectCostCenter:`選擇成本中心...`,costCenterRequired:`請選擇一個成本中心`,amountExample:`例如 4.00`,manualAdjustmentExample:`例如 手動調整`,userRequired:`請選擇一個使用者`,amountInvalid:`金額必須是有效的數字`,createdCostCenter:`成本中心已建立`,createCostCenterFailed:`建立成本中心失敗`,transactionDeleted:`交易已刪除`,deleteTransactionFailed:`刪除交易失敗`,transactionEdited:`交易已更新，帳本已重新計算`,editTransactionFailed:`編輯交易失敗`,manualPrintCreated:`已新增手動列印費用，帳本已重新計算`,manualPrintFailed:`建立手動列印失敗`,memberSaved:`成員已儲存`,memberSaveFailed:`儲存成員失敗`,memberRemoved:`成員已移除`,memberRemoveFailed:`移除成員失敗`,costCenterNameRequired:`成本中心名稱為必填項`,costCenterUpdated:`成本中心已更新`,costCenterUpdateFailed:`更新成本中心失敗`,confirmDeleteCostCenter:`刪除成本中心 "{{name}}" ?`,costCenterDeleted:`成本中心已刪除`,costCenterDeleteFailed:`刪除成本中心失敗`,deleteTransactionConfirm:`刪除此交易？餘額將自動重新計算。`,deposit:`存款`,withdraw:`取款`,printCharge:`列印費用`,deleteTransaction:`刪除交易`},printers:{addPreflight:{checking:`正在檢查連線...`,warning:`部分連線檢查未通過。此印表機可能顯示為離線。請查看下方的檢查項目，盡量修復，或仍然儲存。`,back:`返回`,saveAnyway:`仍然儲存`},title:`印表機`,addPrinter:`新增印表機`,editPrinter:`編輯印表機`,deletePrinter:`刪除印表機`,printerName:`印表機名稱`,serialNumber:`序列號`,ipAddress:`IP 位址 / 主機名稱`,accessCode:`存取碼`,model:`型號`,nozzleCount:`噴嘴數量`,autoArchive:`自動歸檔`,status:{available:`可用`,idle:`空閒`,printing:`列印中`,paused:`已暫停`,offline:`離線`,problem:`故障`,error:`錯誤`,finished:`已完成`,unknown:`未知`},temperatures:{nozzle:`噴嘴`,bed:`熱床`,chamber:`腔室`},heaterHistory:{title:`加熱歷史`,openLabel:`查看加熱歷史`,nozzle:`噴嘴`,nozzle2:`噴嘴 2`,bed:`熱床`,chamber:`腔室`,error:`載入歷史失敗`,empty:`尚未記錄資料`},progress:`{{percent}}% 完成`,timeRemaining:`剩餘 {{time}}`,deleteConfirm:`確定要刪除"{{name}}"嗎？`,maintenanceOk:`維護正常`,maintenanceWarning:`{{count}} 個警告`,maintenanceWarning_plural:`{{count}} 個警告`,maintenanceDue:`{{count}} 個到期`,maintenanceDue_plural:`{{count}} 個到期`,sort:{name:`名稱`,status:`狀態`,model:`型號`,location:`位置`,eta:`剩餘時間`,ascending:`升序排列`,descending:`降序排列`},cardSize:{small:`小卡片`,medium:`中卡片`,large:`大卡片`,extraLarge:`超大卡片`},pageView:{openCamWallPage:`在獨立頁面中開啟攝影機牆`,cards:`卡片`,camWall:`攝影機牆`},camWall:{page:{tokenRejected:`此攝影機牆連結已失效。權杖可能已過期或遭撤銷。`,loadFailed:`無法載入印表機。`},noPrinters:`沒有可顯示的印表機`,noSignal:`無訊號`,live:`直播`,snap:`快照`,off:`關閉`,summary:`直播 {{live}} 個，快照 {{snap}} 個，共 {{total}} 個`,layer:`第 {{cur}}/{{total}} 層`,timeLeft:`剩餘 {{time}}`,statusMode:{off:`關閉`,compact:`精簡`,full:`完整`},settings:{title:`攝影機牆設定`,maxLive:`最大直播數`,maxLiveHint:`同時直播的畫面數量。其他畫面以快照重新整理。`,snapshotInterval:`快照重新整理間隔（秒）`,snapshotIntervalHint:`非直播畫面取得新快照的頻率。`,statusOverlay:`狀態疊加`,statusOverlayHint:`精簡：僅顯示狀態標籤。完整：加上進度、層數、剩餘時間。`}},hideOffline:`隱藏離線`,nextAvailable:`下一個可用`,powerOn:`開機`,offlinePrintersWithPlugs:`帶智慧插座的離線印表機`,noPrintersConfigured:`尚未設定印表機`,search:`搜尋印表機...`,noSearchResults:`沒有印表機符合您的搜尋或篩選條件`,filter:{allStatuses:`所有狀態`,allLocations:`所有位置`},toolbar:{filters:`篩選`,view:`檢視`,actions:`操作`},readyToPrint:`準備列印`,external:`外部`,extL:`外接左`,extR:`外接右`,deleteArchives:`刪除列印歸檔`,noLabel:`無標籤`,printPreview:`列印預覽`,width:`寬度`,height:`高度`,noObjectsFound:`未找到物件`,objectsLoadedOnPrintStart:`物件在列印開始時載入`,willBeSkipped:`將被跳過`,name:`名稱`,serialCannotBeChanged:`序列號無法更改`,locationHelp:`用於分組印表機和篩選佇列任務`,wifiSignal:{veryWeak:`非常弱`,weak:`弱`,fair:`一般`,good:`良好`,excellent:`優秀`},maintenanceUpToDate:`所有維護均已完成 - 點選檢視`,maintenance:{title:`維護中`,subtitle:`此印表機已暫停 — 未連接、不參與佇列調度、不發送通知。`,pillLabel:`維護`,exitButton:`退出維護`,menuEnter:`進入維護模式`,menuExit:`退出維護模式`,toastEntered:`{{name}} 已進入維護模式`,toastExited:`{{name}} 已恢復在線`,confirmMidPrintTitle:`在列印過程中進入維護模式？`,confirmMidPrintMessage:`{{name}} 目前正在列印。進入維護模式將斷開 MQTT 連線，並停止此工作的進度追蹤和完成通知。是否繼續？`,editFieldLabel:`維護模式`,editFieldHelp:`啟用後，此印表機將從 MQTT、佇列調度和通知中暫停 — 適用於維修、並行 Bambuddy 安裝或暫時停用。`},chamberLightOn:`開啟腔室燈`,chamberLightOff:`關閉腔室燈`,files:`檔案`,browseFiles:`瀏覽印表機檔案`,autoOffAfterPrint:`列印後自動關機`,autoOffExecuted:`已執行自動關機 - 開啟印表機以重設`,hmsErrors:`HMS 錯誤`,viewHmsErrors:`檢視 {{count}} 個 HMS 錯誤`,resume:`繼續`,pause:`暫停`,stop:`停止`,camera:`攝影機`,skipObject:`跳過物件`,reconnect:`重新連線`,forceRefresh:`強制重新整理`,forceRefreshSuccess:`已請求重新整理`,mqttDebug:`MQTT 偵錯`,printerInformation:`印表機資訊`,copyToClipboard:`複製`,copied:`已複製！`,state:`狀態`,wifiSignalLabel:`Wi-Fi 訊號`,developerMode:`開發者模式`,enabled:`已啟用`,disabled:`已停用`,addedOn:`新增日期`,sdCard:`SD 卡`,inserted:`已插入`,notInserted:`未插入`,totalPrintHours:`列印時長`,activeNozzle:`目前：{{nozzle}} 噴嘴`,amsSwitchInletTooltip:`耗材變軌器 IN-{{inlet}}（{{side}}）— 可向兩個噴嘴供料`,nozzleRack:`噴嘴架`,nozzleDocked:`已停靠`,nozzleMounted:`已安裝`,nozzleActive:`使用中`,nozzleIdle:`空閒`,nozzleDiameter:`直徑`,nozzleType:`類型`,nozzleStatus:`狀態`,nozzleFilament:`耗材`,nozzleWear:`磨損`,nozzleMaxTemp:`最高溫度`,nozzleSerial:`序列號`,nozzleHardenedSteel:`硬化鋼`,nozzleStainlessSteel:`不鏽鋼`,nozzleTungstenCarbide:`碳化鎢`,nozzleFlow:`流量`,nozzleHighFlow:`高流量`,nozzleStandardFlow:`標準`,firmwareUpdate:`韌體更新`,firmwareInstructions:`在印表機觸控式螢幕上，前往`,firmwareNav:`導航到`,settings:`設定`,firmware:`韌體`,discoverPrinters:`發現印表機`,searching:`搜尋中...`,manualEntry:`手動輸入`,addFromCloud:`從雲端新增`,toast:{printerDeleted:`印表機已刪除`,missingSpoolAssignment:`已在{{printer}}上開始列印。以下料槽未分配耗材: {{slots}}`,killSwitchTriggered:`計費終止開關已停止 {{printer}} 上的未授權列印：{{filename}}`,billingChargeFailed:`{{printer}} 上的 {{filename}} 計費失敗。預算保留已保留；請檢查伺服器記錄。`,assignmentVerified:`耗材已載入料槽{{slot}}（{{printer}}）`,assignmentVerifiedNoKprofile:`{{printer}}的料槽{{slot}}已載入，但流量校準設定檔（K設定檔）未套用`,assignmentNotConfirmed:`無法確認{{printer}}上料槽{{slot}}的分配，請檢查AMS料槽`,printerAdded:`印表機已新增`,printerUpdated:`印表機已更新`,failedToDelete:`刪除印表機失敗`,failedToAdd:`新增印表機失敗`,connectionFailedNotAdded:`無法連線到印表機。請檢查 IP 位址、序號和存取碼，並確認已啟用僅區域網路（LAN-only）模式。該印表機未被新增。`,failedToUpdate:`更新印表機失敗`,commandSent:`命令已傳送`,failedToSendCommand:`傳送命令失敗`,turnedOn:`{{name}} 已開啟`,failedToPowerOn:`開啟 {{name}} 失敗`,scriptTriggered:`腳本已觸發`,printStopped:`列印已停止`,printPaused:`列印已暫停`,printResumed:`列印已繼續`,referenceDeleted:`參考已刪除`,detectionAreaSaved:`檢測區域已儲存`,failedToRunScript:`執行腳本失敗`,failedToStopPrint:`停止列印失敗`,failedToPausePrint:`暫停列印失敗`,failedToResumePrint:`繼續列印失敗`,failedToControlChamberLight:`控制腔室燈失敗`,failedToSetSpeed:`設定列印速度失敗`,failedToUpdateSetting:`更新設定失敗`,failedToSkipObjects:`跳過物件失敗`,failedToRereadRfid:`重新讀取 RFID 失敗`,failedToCheckPlate:`檢查列印板失敗`,failedToUpdateLabel:`更新標籤失敗`,failedToDeleteReference:`刪除參考失敗`,failedToSaveDetectionArea:`儲存檢測區域失敗`,plateCheckEnabled:`列印板檢查已啟用`,plateCheckDisabled:`列印板檢查已停用`,calibrationSaved:`校準已儲存！`,calibrationFailed:`校準失敗`,rfidRereadInitiated:`已發起 RFID 重新讀取`,loadInitiated:`載入耗材中…`,unloadInitiated:`卸載耗材中…`,failedToLoad:`載入耗材失敗`,failedToUnload:`卸載耗材失敗`},connection:{connected:`已連線`,offline:`離線`},plateStatus:{markCleared:`將列印板標記為已清理`,cleared:`列印板已清理`,notCleared:`列印板未清理`,inUse:`列印板使用中`},queue:{inQueue:`佇列中有 {{count}} 個列印任務`,inQueue_plural:`佇列中有 {{count}} 個列印任務`},controls:`控制`,rfid:{reread:`重新讀取 RFID`},ams:{load:`載入`,unload:`卸載`,feedTitle:`要將 {{slot}} 載入哪個噴嘴？`,feedPrompt:`Filament Track Switch 可以將此槽位送往任一熱端。請選擇要送入的一側。`,feedLeft:`左噴嘴`,feedRight:`右噴嘴`,feedAlreadyLoaded:`已載入`,switchNotReady:`Filament Track Switch 尚未設定。請在印表機上為每個 AMS 指派入口後再試一次。`},bedJog:{limitWarning:`手動移動時不會強制執行行程限位——Bambu 韌體存在缺陷，遠端指令會忽略軟體限位。請小心移動以避免碰撞。`,title:`點動控制`,bed:`熱床`,step:`步長 (mm)`,up:`熱床上移`,down:`熱床下移`,toolheadUp:`噴頭上移`,toolheadDown:`噴頭下移`,disabledWhilePrinting:`列印中已停用`,notHomedTitle:`印表機未歸零`,notHomedMessage:`印表機自上次列印以來尚未歸零。請先執行自動歸零以確保安全定位（先停放噴頭，然後歸零 X、Y 和 Z），或者直接移動 — 軟限位將被繞過。`,homeZ:`自動歸零`,moveAnyway:`強制移動`,homingStarted:`印表機自動歸零中…`},permission:{noAdd:`您沒有新增印表機的權限`,noEdit:`您沒有編輯印表機的權限`,noDelete:`您沒有刪除印表機的權限`,noControl:`您沒有控制印表機的權限`,noFiles:`您沒有存取印表機檔案的權限`,noAmsRfid:`您沒有重新讀取 AMS RFID 的權限`,noSmartPlugControl:`您沒有控制智慧插座的權限`,noCamera:`您沒有檢視攝影機的權限`},modal:{addTitle:`新增印表機`,editTitle:`編輯印表機`,myPrinter:`我的印表機`,selectModel:`選擇型號...`,locationGroup:`位置 / 分組（可選）`,locationPlaceholder:`例如：工作室、辦公室、地下室`,autoArchiveLabel:`自動歸檔已完成的列印`,fromPrinterSettings:`來自印表機設定`,modelOptional:`型號（可選）`,saveChanges:`儲存更改`},skipObjects:{tooltip:`跳過物件`,onlyWhilePrinting:`跳過物件（僅在列印時）`,requiresMultiple:`跳過物件（需要2個以上物件）`,title:`跳過物件`,matchIdsInfo:`將 ID 與印表機螢幕上的 ID 進行對照`,printerShowsIds:`印表機螢幕上顯示列印板上物件的 ID`,skipSelected:`跳過所選`,skipping:`跳過中...`,noObjectsSelected:`未選擇物件`,selectObjectsToSkip:`選擇要從目前列印中跳過的物件`,skipped:`已跳過`,objectsSkipped:`物件已跳過`,activeCount:`{{count}} 個活躍`,waitForLayer:`等待第2層以上才能跳過物件（目前第 {{layer}} 層）`,skip:`跳過`,confirmTitle:`跳過物件？`,confirmMessage:`確定要跳過"{{name}}"嗎？此操作無法復原。`,confirmAllMessage:`已選取所有剩餘物件。這將停止列印工作。是否繼續？`,confirmMultipleMessage:`跳過選取的 {{count}} 個物件？此操作無法復原。`},confirm:{deleteTitle:`刪除印表機`,deleteMessage:`確定要刪除"{{name}}"嗎？這將移除所有連線設定。`,deleteArchivesNote:`此印表機的所有列印歷史將被永久刪除。`,keepArchivesNote:`列印歷史將保留，但不再與此印表機連結。`,stopTitle:`停止列印`,stopMessage:`確定要停止"{{name}}"上的目前列印嗎？這將取消列印任務。`,stopButton:`停止列印`,pauseTitle:`暫停列印`,pauseMessage:`確定要暫停"{{name}}"上的目前列印嗎？`,pauseButton:`暫停列印`,resumeTitle:`繼續列印`,resumeMessage:`確定要繼續"{{name}}"上的列印嗎？`,resumeButton:`繼續列印`,powerOnTitle:`開啟印表機`,powerOnMessage:`確定要開啟"{{name}}"的電源嗎？`,powerOnButton:`開機`,powerOffTitle:`關閉印表機`,powerOffMessage:`確定要關閉"{{name}}"的電源嗎？`,powerOffWarning:`警告："{{name}}"正在列印中！確定要關閉電源嗎？這將中斷列印並可能損壞印表機。`,powerOffButton:`關機`,haToggleTitle:`切換"{{name}}"`,haToggleMessage:`切換 Home Assistant 實體 {{entity}}？如果目前為開啟狀態，可能會關閉電源。`,haToggleWarning:`警告："{{name}}"正在列印中！切換 {{entity}} 可能會切斷電源並中斷列印。是否繼續？`,haToggleButton:`切換`},bulk:{select:`選擇`,selectAll:`全選`,selectByLocation:`按位置選擇`,selected:`已選擇{{count}}臺`,actions:{stop:`停止`,pause:`暫停`,resume:`繼續`,clearPlate:`清除列印床`,clearHMS:`清除通知`},confirm:{stopTitle:`停止{{count}}個列印任務`,stopMessage:`這將取消{{count}}臺印表機上的活動列印任務。此操作無法復原。`,stopButton:`全部停止`,pauseTitle:`暫停{{count}}個列印任務`,pauseMessage:`這將暫停{{count}}臺印表機上的活動列印任務。`,pauseButton:`全部暫停`,clearPlateTitle:`清除{{count}}個列印床`,clearPlateMessage:`這將清除{{count}}臺印表機的列印床，可能會觸發佇列中的任務。`,clearPlateButton:`全部清除`},success:`{{action}}已在{{count}}臺印表機上完成`,partial:`{{succeeded}}成功，{{failed}}失敗`,noneApplicable:`沒有選中的印表機處於適合此操作的狀態`,selectByState:`按狀態選擇`},discovery:{title:`發現印表機`,searching:`搜尋中...`,scanning:`掃描中...`,scanProgress:`掃描中... {{scanned}}/{{total}}`,foundPrinters:`發現 {{count}} 臺印表機`,noPrintersFound:`未找到印表機`,noPrintersFoundSubnet:`在指定子網中未找到印表機。`,noPrintersFoundNetwork:`在網路上未找到印表機。`,allConfigured:`所有發現的印表機已設定完畢。`,alreadyAdded:`已新增`,select:`選擇`,manualEntry:`手動輸入`,addFromCloud:`從雲端新增`,subnetToScan:`要掃描的子網`,dockerNote:`偵測到 Docker 環境。請以 CIDR 格式輸入印表機所在子網。需要在 docker-compose.yml 中設定 network_mode: host。`,scanSubnet:`掃描子網查詢印表機`,discoverNetwork:`在網路上發現印表機`,scanningSubnet:`正在掃描子網查詢拓竹印表機...`,scanningNetwork:`正在掃描網路...`,serialRequired:`需要序列號`,unknown:`未知`,failedToStart:`啟動發現失敗`,customSubnetOption:`自訂子網路...`,customSubnetLabel:`自訂子網路 (CIDR)`,customSubnetNote:`如果您的印表機與此伺服器位於不同的網路中，請使用自訂子網路。FTP (990) 和 MQTT (8883) 連接埠必須能夠跨越路由邊界存取。`},drying:{start:`開始乾燥`,stop:`停止乾燥`,temperature:`溫度`,duration:`時長`,hours:`小時`,timeRemaining:`剩餘 {{time}}`,active:`乾燥中`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`不支援乾燥`,powerRequired:`連線AMS電源介面卡以啟用乾燥`,cannotDryNow:`AMS 目前無法開始乾燥`,startingDrying:`正在啟動乾燥...`,toastCommandSent:`已傳送乾燥命令`,toastStopped:`已停止乾燥`,toastNotStarted:`印表機已接受命令，但 AMS 未開始乾燥。請檢查 AMS 電源變壓器是否已連接，以及印表機是否處於閒置狀態。`,screenOnly:`此印表機的 AMS 乾燥只能在印表機本身的螢幕上操作（Bambu 的限制）`,stoppingDrying:`正在停止乾燥...`,rotateTray:`乾燥時旋轉料盤`,rotateUnavailableReason:`無法使用 — 此 AMS 中有插槽已裝入列印頭。料盤被進料管固定，無法旋轉。請先退回耗材。`,startMode:`開始時間`,modeNow:`立即`,modeDelay:`延遲後`,modeAtTime:`指定時間`,schedule:`預約`,scheduledFor:`乾燥已預約：{{time}}`,scheduledAsap:`乾燥已預約（等待印表機）`,cancelScheduled:`取消預約乾燥`,scheduleFailed:`預約乾燥失敗`,retractFilament:`請退回AMS出口處的耗材後再開始乾燥`,waitingAmsNotFound:`正在等待偵測到AMS`,waitingOffline:`正在等待印表機上線`,waitingPrinterBusy:`正在等待印表機空閒`,waitingAlreadyDrying:`正在等待目前的乾燥週期結束`,waitingInterrupted:`已中斷，將在印表機空閒後重新開始`,scheduleFailedReason:`預約乾燥失敗：{{reason}}`,scheduleFailedUnknown:`未知錯誤`,dismissFailed:`忽略`},amsBackup:{titleOn:`AMS 備用料盤已開啟。點擊以停用。`,titleOff:`AMS 備用料盤已關閉。點擊以啟用。`,titleUnknown:`本印表機不支援讀取 AMS 備用料盤狀態。`,toastEnabled:`AMS 備用料盤已啟用`,toastDisabled:`AMS 備用料盤已停用`,modalTitle:`AMS 備用料盤`,modalHelp:`目前料槽用盡時，印表機會按此順序在使用相同預設和顏色的料槽之間循環。`,modalNoSlots:`未載入耗材。`,modalNoPairs:`沒有備用料盤對 — 沒有兩個料槽同時匹配預設和顏色。`,extruderRightShort:`右`,extruderLeftShort:`左`,stateOn:`已啟用`,stateOff:`已停用`,stateUnknown:`此印表機不支援`},activeJobSlot:{title:`此料槽在目前列印中是耗材 {{n}}`,ariaLabel:`目前列印料槽 {{n}}`},expectedSlot:{title:`印表機正在等待此料槽裝入耗材`,ariaLabel:`需要裝料的料槽 {{n}}`,label:`{{ams}} · 料槽 {{slot}}`,external:`外部料卷`},filaments:`耗材`,externalSpool:{hide:`隱藏外部料卷`,show:`顯示外部料卷`},openCameraOverlay:`開啟攝影機疊加層`,openCameraWindow:`在新視窗中開啟攝影機`,firmwareUpdateAvailable:`韌體更新可用：{{current}} → {{latest}}`,firmwareUpToDate:`韌體 {{version}} — 已是最新`,firmwareUpdateButton:`更新`,plateDetection:{noPermission:`您沒有更新印表機的權限`,enabledClick:`列印板檢查已啟用 - 點選停用`,disabledClick:`列印板檢查已停用 - 點選啟用`,manageCalibration:`管理列印板檢測校準`,calibrationRequired:`需要校準`,calibrationInstructions:`請確保列印板<strong>完全空置</strong>，然後點選校準。`,calibrationDescription:`校準會拍攝空置列印板的參考影像。後續檢查將與此參考進行比較以檢測物體。`,calibrationTip:`<strong>提示：</strong>您最多可以為不同的列印板儲存5個校準。系統會在檢查時自動使用最佳匹配。`,plateEmpty:`列印板似乎是空的`,objectsDetected:`在列印板上偵測到物體`,confidence:`置信度`,difference:`差異`,analysisPreview:`分析預覽：`,analysisLegend:`綠色框 = 檢測區域，紅色覆蓋 = 與校準的差異`,savedReferences:`已儲存的參考 ({{count}}/{{max}})`,deleteReference:`刪除參考`,labelPlaceholder:`標籤...`,clickToEdit:`{{label}} - 點選編輯`,clickToAddLabel:`點選新增標籤`},speed:{title:`列印速度`,silent:`靜音 (50%)`,standard:`標準 (100%)`,sport:`運動 (124%)`,ludicrous:`瘋狂 (166%)`},airduct:{title:`風道模式`,cooling:`製冷`,heating:`加熱`},noSdCard:`無SD`,door:{open:`開`,closed:`關`},fans:{partCooling:`零件冷卻風扇`,auxiliary:`輔助風扇`,leftAuxiliary:`左輔助風扇`,exhaust:`排氣`,chamber:`腔室風扇`},clickToViewHmsErrors:`點選檢視 HMS 錯誤`,aiDetection:{safe:`安全`,warning:`警告`,failure:`失敗`,idle:`空閒`,error:`未檢測`,unknown:`啟動中`,tooltipError:`AI 故障檢測未檢測此次列印：{{reason}} - 點擊查看詳情`,tooltipUnknown:`AI 故障檢測：正在等待首個結果 - 點擊查看詳情`,errorHint:`本次列印未被檢測。下方問題解決後，檢測將自動恢復。`,tooltip:`AI 故障檢測：{{status}}（評分 {{score}}）- 點擊查看詳情`,tooltipIdle:`AI 故障檢測已啟用 - 下次列印時開始監控 - 點擊查看詳情`,modalTitle:`AI 故障檢測 - {{name}}`,currentStatus:`狀態`,score:`評分`,framesAnalyzed:`已分析幀數`,idleHint:`目前沒有正在監控的列印。下次列印時將自動開始監控。`,lastError:`最近錯誤`,openSettings:`開啟設定`},estimatedCompletion:`預計完成時間`,plateNumber:`板 {{number}}`,slotOptions:`槽位選項`,amsPopup:{friendlyName:`AMS 名稱`,friendlyNamePlaceholder:`例如 AMS 友好名稱`,serialNumber:`序列號`,firmwareVersion:`韌體`,save:`儲存`,clear:`清除`,noEditPermission:`您沒有重新命名 AMS 單元的權限`},firmwareModal:{title:`韌體更新`,titleUpToDate:`韌體資訊`,currentVersion:`目前版本：`,latestVersion:`最新版本：`,releaseNotes:`發布說明`,checkingPrereqs:`正在檢查前提條件...`,sdCardReady:`SD 卡已就緒。點選下方上傳韌體。`,uploadedSuccess:`韌體已上傳到 SD 卡！`,applyInstructions:`在印表機上套用更新：`,step1:`在印表機觸控式螢幕上，前往<strong>設定</strong>`,step2:`導航到<strong>韌體</strong>`,step3:`選擇<strong>從 SD 卡更新</strong>`,step4:`更新將需要 10-20 分鐘`,done:`完成`,starting:`啟動中...`,uploadFirmware:`上傳韌體`,uploadFailed:`上傳啟動失敗：{{error}}`,uploadedToast:`韌體已上傳！請在印表機螢幕上觸發更新。`,availableVersions:`可用版本`,usable:`可用`,unavailable:`不可用`,installed:`已安裝`,newerBadge:`較新`,olderBadge:`較舊`,currentBadge:`目前`},accessCodePlaceholder:`留空以保持目前值`,roi:{title:`檢測區域 (ROI)`,xStart:`X 起點`,yStart:`Y 起點`,width:`寬度`,height:`高度`,instruction:`調整檢測區域以聚焦到列印板。預覽中的綠色框顯示目前區域。`},developerModeWarning:`以下印表機未啟用開發者區域網路模式：{{names}}。某些功能可能無法使用。`,howToEnable:`如何啟用`,incompatibleFile:`此檔案是為 {{slicedFor}} 切片的，但該印表機是 {{printerModel}}`,dropNotPrintable:`只能列印 .gcode 和 .gcode.3mf 檔案`,dropToPrint:`拖放以列印`,dropToQueue:`拖放以加入佇列`},archives:{media:{title:`列印影片`,download:`下載列印影片`,searching:`正在檢查印表機中的影片…`,searchFailed:`無法檢查印表機中的影片。`,none:`找不到此列印工作的縮時攝影或 IP 攝影機影片片段。`,attachedTimelapse:`已附加的縮時攝影`,printerFiles:`仍保留在印表機上的檔案`,downloadSelected:`下載所選檔案`,printerMissing:`印表機已不在設定中`,timelapseUnavailable:`無法讀取縮時攝影目錄`,ipcamUnavailable:`無法讀取 IP 攝影機目錄`},title:`列印歸檔`,no3mfBanner:{title:`最近的一些列印未能附帶縮圖封存`,body:`切片機沒有在印表機的 SD 卡上留下 .gcode.3mf 檔案，因此 Bambuddy 無法取得縮圖或切片機中繼資料。這通常是因為切片機 (Bambu Studio / OrcaSlicer 的裝置分頁) 中「將傳送的檔案儲存在外部儲存中」已關閉。`,docsLink:`檢視安裝步驟 4`,docsLinkInternalStorage:`為什麼會這樣`,titleInternalStorage:`最近有些列印留在了印表機的內部儲存中`,bodyInternalStorage:`Bambu Studio 把切片檔案儲存到了印表機的內部儲存而不是記憶卡上，因此 Bambuddy 透過 FTP 讀不到任何東西。在 H2 系列、P2S 與 X2D 上，「列印」按鈕總是這樣做，只有「傳送」才提供選擇，而它的預設值也是「快取」。這些列印仍會帶著名稱與時間歸檔，只是沒有縮圖與切片中繼資料。要取得完整歸檔，請從 Bambuddy 啟動列印，或改用 OrcaSlicer 切片；若要繼續用 Bambu Studio，請用「傳送」並選擇「外部儲存」，之後再啟動列印。以上都需要印表機中插有記憶卡或 USB 隨身碟。`,titleNoExternalStorage:`最近有些列印無法歸檔 — 印表機中沒有儲存媒體`,bodyNoExternalStorage:`印表機的插槽中未偵測到記憶卡或隨身碟，切片檔案無處存放，Bambuddy 也無從讀取。插入一個，下次列印就會完整歸檔。`,titleInternalHistory:`最近有些列印是從印表機裡既有的檔案啟動的`,bodyInternalHistory:`這些列印來自印表機自己的檔案庫 — 從它的螢幕重新列印、從 Handy 啟動，或是先前傳送、稍後才列印的檔案。Bambuddy 透過 FTP 讀取列印檔案，而 FTP 只提供記憶卡或隨身碟，印表機卻把這個檔案庫放在 FTP 搆不到的區域，因此沒有 3MF 可讀。切片軟體的任何設定都改變不了這一點，因為這些列印根本沒有傳送過檔案。它們仍會帶著名稱與時間歸檔，並且可以在「編輯歸檔」中手動填入已用耗材。要獲得完整歸檔，請從 Bambuddy 或你的切片軟體啟動列印。`,titleFtpsCooloff:`最近有些列印無法歸檔 — 印表機拒絕了檔案連線`,bodyFtpsCooloff:`Bambuddy 開啟了印表機的檔案傳輸連接埠 (FTPS 990)，而印表機回應的內容並不是 TLS，因此無法從它讀取任何東西。這些列印仍會帶著名稱和時間歸檔，只是沒有縮圖和切片中繼資料。這不是切片軟體的設定，也不是你改動了什麼 —— 相同型號、相同韌體在其他安裝上運作正常，受影響的印表機通常過一陣子會自行恢復。出現這種失敗後，Bambuddy 會暫停對該印表機的傳輸五分鐘，暫停結束後再回來取檔案，所以短暫的一次會自行補齊；卡片仍然是空的，表示拒絕持續得比重試更久。觸發原因目前尚不清楚。如果反覆出現，請在系統頁面開啟除錯記錄，並把支援套件附在你的報告裡。`,titleFtpTransferFailed:`部分近期列印未能封存 — 檔案傳輸逾時`,bodyFtpTransferFailed:`切片檔就在印表機的記憶卡上，印表機也確實開始傳輸了，但傳輸未能在允許的時間內完成。列印開始時，印表機還要同時處理攝影機、狀態訊息與工作上傳，較大的 3MF 檔未必能在這種情況下傳完。這些列印仍保留名稱與時間，只是缺少縮圖與切片資料。這不是切片軟體的設定問題，也不是你更動造成的。Bambuddy 會在接下來的十分鐘內再取三次檔案，因此多數情況會自行補齊；如果卡片仍是空的，代表那幾次嘗試同樣逾時了。若經常發生，請在 設定 > 網路 > FTP 重試 中調高 連線逾時。`,dismissLabel:`關閉此通知`},searchPlaceholder:`搜尋歸檔...`,filterByPrinter:`按印表機篩選`,filterByStatus:`按狀態篩選`,sortBy:`排序方式`,sortNewest:`最新優先`,sortOldest:`最舊優先`,sortName:`名稱`,sortDuration:`時長`,sortLargest:`最大優先`,sortSmallest:`最小優先`,sortSize:`大小`,noArchives:`未找到歸檔`,noArchivesSearch:`沒有匹配搜尋的歸檔`,originalPrintNotVisible:`原始列印不可見 - 請嘗試清除篩選條件`,noArchivesYet:`尚無歸檔`,prints:`條列印`,pagination:{showing:`顯示`,to:`至`,of:`共`,show:`每頁`,page:`頁`,all:`全部`},loadingArchives:`載入歸檔中...`,releaseToUpload:`放開以上傳`,showAll:`顯示全部`,showFavoritesOnly:`僅顯示收藏`,gridView:`網格檢視`,listView:`列表檢視`,calendarView:`日曆檢視`,logView:`列印日誌`,manageTags:`管理標籤`,showFailedPrints:`顯示失敗的列印`,hideFailedPrints:`隱藏失敗的列印`,hideDuplicates:`隱藏重複項`,viewOriginalPrint:`點選檢視原始列印 (#{{id}})`,printTime:`列印時間`,filamentUsed:`耗材用量`,cost:`成本`,preview:`預覽`,deleteArchive:`刪除歸檔`,deleteConfirm:`確定要刪除此歸檔嗎？`,favorite:`收藏`,unfavorite:`取消收藏`,viewDetails:`檢視詳情`,status:{completed:`已完成`,failed:`失敗`,stopped:`已停止`},toast:{source3mfAttached:`源 3MF 已附加：{{filename}}`,failedUploadSource3mf:`上傳源 3MF 失敗`,source3mfRemoved:`源 3MF 已移除`,failedRemoveSource3mf:`移除源 3MF 失敗`,f3dAttached:`F3D 已附加：{{filename}}`,failedUploadF3d:`上傳 F3D 失敗`,f3dRemoved:`F3D 已移除`,failedRemoveF3d:`移除 F3D 失敗`,timelapseAttached:`縮時攝影已附加：{{filename}}`,timelapseAlreadyAttached:`縮時攝影已附加`,noMatchingTimelapse:`未找到匹配的縮時攝影`,failedScanTimelapse:`掃描縮時攝影失敗`,failedAttachTimelapse:`附加縮時攝影失敗`,timelapseRemoved:`縮時攝影已移除`,failedRemoveTimelapse:`移除縮時攝影失敗`,timelapseUploaded:`縮時攝影已上傳：{{filename}}`,failedUploadTimelapse:`上傳縮時攝影失敗`,archiveDeleted:`歸檔已刪除`,failedDeleteArchive:`刪除歸檔失敗`,addedToFavorites:`已新增到收藏`,removedFromFavorites:`已從收藏中移除`,projectUpdated:`專案已更新`,failedUpdateProject:`更新項目失敗`,linkCopied:`連結已複製到剪貼簿`,failedCopyLink:`複製連結失敗`,photoDeleted:`照片已刪除`,failedDeletePhoto:`刪除照片失敗`,failedDeleteArchives:`刪除歸檔失敗`,failedUpdateFavorites:`更新收藏失敗`,exportDownloaded:`匯出已下載`,exportFailed:`匯出失敗`},menu:{print:`列印`,openInBambuStudio:`在切片軟體中開啟`,slice:`切片`,externalLink:`外部連結`,viewOnMakerWorld:`在 MakerWorld 上檢視`,preview3d:`3D 預覽`,viewTimelapse:`檢視縮時攝影`,scanForTimelapse:`掃描縮時攝影`,uploadTimelapse:`上傳縮時攝影`,removeTimelapse:`移除縮時攝影`,downloadSource3mf:`下載源 3MF`,uploadSource3mf:`上傳源 3MF`,replaceSource3mf:`替換源 3MF`,removeSource3mf:`移除源 3MF`,uploadF3d:`上傳 F3D`,replaceF3d:`替換 F3D`,downloadF3d:`下載 F3D`,removeF3d:`移除 F3D`,download:`下載`,copyDownloadLink:`複製下載連結`,qrCode:`QR 碼`,viewPhotos:`檢視照片`,viewPhotosCount:`檢視照片 ({{count}})`,projectPage:`專案頁面`,addToFavorites:`新增到收藏`,removeFromFavorites:`從收藏中移除`,edit:`編輯`,printLog:`列印記錄`,goToProject:`前往專案：{{name}}`,addToProject:`新增到專案`,removeFromProject:`從專案中移除`,loading:`載入中...`,noProjectsAvailable:`無可用專案`,searchProjects:`搜尋專案…`,select:`選擇`,deselect:`取消選擇`,delete:`刪除`},permission:{noReprint:`您沒有重新列印此歸檔的權限`,noAddToQueue:`您沒有新增到佇列的權限`,noUpdateArchives:`您沒有更新歸檔的權限`,noUploadFiles:`您沒有上傳檔案的權限`,noDownload:`您沒有下載歸檔的權限`,noCopyLink:`您沒有複製下載連結的權限`,noDelete:`您沒有刪除此歸檔的權限`,noEdit:`您沒有編輯此條目的權限`,noCreate:`您沒有建立歸檔的權限`},platePicker:{title:`選擇要預覽的列印板`,hint:`此存檔包含多個列印板。選擇一個在 GCode 檢視器中開啟。`,plateLabel:`列印板 {{index}}`,objectCount:`{{count}} 個物件`,objectCount_plural:`{{count}} 個物件`,noGcode:`此存檔沒有可預覽的已切片 G 代碼。請先在 Bambu Studio 中開啟並切片。`},card:{previousPlate:`上一個板`,nextPlate:`下一個板`,plateNumber:`板 {{index}}`,moreOptions:`右鍵檢視更多選項`,addToFavorites:`新增到收藏`,removeFromFavorites:`從收藏中移除`,cancelled:`已取消`,failed:`失敗`,duplicate:`重複`,duplicateTitle:`此模型之前已列印過`,openSource3mf:`在 Bambu Studio 中開啟源 3MF（右鍵檢視更多選項）`,downloadF3d:`下載 Fusion 360 設計檔案`,viewTimelapse:`檢視縮時攝影`,viewPhoto:`檢視 1 張照片`,viewPhotos:`檢視 {{count}} 張照片`,openFolder:`開啟資料夾：{{name}}`,slicedFile:`已切片檔案 - 可以列印`,sourceFile:`僅原始檔 - 無 AMS 對應可用`,gcode:`GCODE`,source:`原始檔`,project:`專案：{{name}}`,runsBadge:`{{count}} 次列印`,runsBadgeTitle:`共 {{count}} 次列印 — 成功 {{successful}} 次，失敗 {{failed}} 次。點擊查看完整列印記錄。`,estimated:`預計：{{time}}`,actual:`實際：{{time}}`,accuracy:`準確度：{{percent}}%`,filament:`{{weight}} 克`,layer:`{{count}} 層`,layers:`{{count}} 層`,object:`{{count}} 個物件`,objects:`{{count}} 個物件`,slicedFor:`為 {{model}} 切片`,uploadedBy:`上傳者`,noPermissionReprint:`您沒有重新列印的權限`,noFileForReprint:`無可用的 3MF 檔案 — 列印紀錄時無法從印表機下載該檔案`,slicerAmsMapping:`已儲存 AMS 對應（{{printer}}）`,slicerAmsMappingTooltip:`切片軟體選擇的 AMS 槽位已為 {{printer}} 儲存。槽位編號僅在該印表機上有意義，因此只有再次傳送至 {{printer}} 時，重新列印才會重複使用。`,noPermissionEdit:`您沒有編輯歸檔的權限`,noPermissionDelete:`您沒有刪除歸檔的權限`,openInBambuStudio:`在切片軟體中開啟`,openInBambuStudioToSlice:`在切片軟體中開啟進行切片`,slice:`切片`,externalLink:`外部連結`,makerWorld:`MakerWorld：{{designer}}`,viewProject:`檢視專案`,noExternalLink:`無外部連結`,preview3d:`3D 預覽`,download:`下載`,edit:`編輯`,delete:`刪除`},runLog:{title:`列印記錄`,modalTitle:`列印記錄 — {{name}}`,modalTitleFallback:`此歸檔`,empty:`此歸檔尚未記錄任何列印事件。`,col:{date:`日期`,status:`狀態`,duration:`時長`,filament:`耗材`,cost:`成本`},status:{completed:`已完成`,failed:`失敗`,cancelled:`已取消`,stopped:`已停止`,skipped:`已略過`,printing:`列印中`}},modal:{deleteArchive:`刪除歸檔`,deleteConfirm:`確定要刪除"{{name}}"嗎？此操作無法復原。`,deleteButton:`刪除`,deletePurgeStats:`同時從快速統計中刪除此列印（耗材、時間、成本、能耗）`,deleteQueueItemsWarning:`與此封存連結的 {{count}} 個佇列項目也將被移除。`,deleteBlockedByPrinting:`無法刪除 — {{count}} 個佇列項目正在列印。請先停止列印再重試。`,removeSource3mf:`移除源 3MF`,removeSource3mfConfirm:`確定要從"{{name}}"中移除源 3MF 檔案嗎？這將刪除原始切片專案檔案。`,removeButton:`移除`,removeF3d:`移除 F3D`,removeF3dConfirm:`確定要從"{{name}}"中移除 Fusion 360 設計檔案嗎？`,removeTimelapse:`移除縮時攝影`,removeTimelapseConfirm:`確定要從"{{name}}"中移除縮時攝影影片嗎？`,timelapse:`{{name}} - 縮時攝影`,selectTimelapse:`選擇縮時攝影`,selectTimelapseDesc:`未找到自動匹配。請選擇此列印的縮時攝影：`,deleteArchives:`刪除歸檔`,deleteArchivesConfirm:`確定要刪除 {{count}} 個歸檔嗎？此操作無法復原。`,deleteCount:`刪除 {{count}} 個`},page:{title:`歸檔`,printsCount:`{{filtered}} / {{total}} 次列印`,dropFilesHere:`將 .3mf 檔案拖放到此處`,releaseToUpload:`放開以上傳`,only3mfSupported:`僅支援 .3mf 檔案`,close:`關閉`,selected:`已選擇 {{count}} 個`,selectAll:`全選`,tags:`標籤`,project:`專案`,favorite:`收藏`,delete:`刪除`,toggledFavorites:`已切換 {{count}} 個歸檔的收藏狀態`,failedUpdateFavorites:`更新收藏失敗`,archivesDeleted:`已刪除 {{count}} 個歸檔`,failedDeleteArchives:`刪除歸檔失敗`,photoDeleted:`照片已刪除`,failedDeletePhoto:`刪除照片失敗`},list:{name:`名稱`,printer:`印表機`,date:`日期`,size:`大小`,actions:`操作`,hasTimelapse:`有縮時攝影`},log:{date:`日期`,printName:`列印名稱`,printer:`印表機`,user:`使用者`,status:`狀態`,duration:`時長`,filament:`耗材`,filamentUsed:`耗材用量`,cost:`成本`,energy:`電量`,energyCost:`電費`,completedAt:`完成時間`,columns:`欄位`,sortBy:`依{{column}}排序`,allPrinters:`所有印表機`,allUsers:`所有使用者`,allStatuses:`所有狀態`,cancelled:`已取消`,skipped:`已跳過`,dateFrom:`從`,dateTo:`到`,noEntries:`未找到列印日誌條目`,showing:`顯示 {{count}} / {{total}} 條`,rowsPerPage:`行數`,page:`頁`,prev:`上一頁`,next:`下一頁`,clearLog:`清除日誌`,clearLogTitle:`清除列印日誌`,clearLogConfirm:`所有列印日誌條目將被永久刪除。歸檔和佇列項目不受影響。此操作無法復原。確定要繼續嗎？`,clearLogButton:`全部清除`,cleared:`已清除 {{count}} 條日誌`,clearFailed:`清除列印日誌失敗`,deleteEntryTitle:`刪除列印日誌條目`,deleteEntryConfirm:`此條目將從日誌中刪除，其耗材、時間與成本貢獻也將從快速統計中移除。對應的歸檔（如有）不受影響。此操作無法復原。`,entryDeleted:`已刪除列印日誌條目`,entryDeleteFailed:`刪除列印日誌條目失敗`,editEntryTitle:`編輯列印日誌條目`,editEntryDescription:`對這次列印進行分類。故障分析小工具按這些值分組，因此更新會立即反映在統計數據中。`,entryUpdated:`已更新列印日誌條目`,entryUpdateFailed:`更新列印日誌條目失敗`,statuses:{completed:`已完成`,failed:`失敗`,stopped:`已停止`,cancelled:`已取消`,skipped:`已略過`}}},dispatchToast:{untitled:`列印任務`,startingPrints:`正在開始列印`,progressSummary:`{{complete}}/{{total}} 已完成 • 處理中: {{processing}}`,expandDetails:`展開派發詳情`,collapseDetails:`收起派發詳情`,awaitingPrinter:`等待印表機回應…`,status:{processing:`處理中`,completed:`已完成`,failed:`失敗`},failed:{generic:`派發失敗`,upload_failed:`上傳到印表機失敗`,start_command_failed:`印表機拒絕了開始命令`},dismiss:`關閉`},pipelineRuns:{title:`管線執行`,loading:`載入中…`,empty:`尚無管線執行。`,filter:{pipeline:`管線`,status:`狀態`,target:`目標`,all:`全部`,allPipelines:`全部管線`,allStatus:`全部狀態`,allTargets:`全部目標`,clear:`清除篩選`,noMatches:`沒有執行符合目前的篩選條件。`},totalCount_one:`{{n}} 次執行`,totalCount_other:`{{n}} 次執行`,copies:`{{n}} 份`,failedCount:`{{n}} 失敗`,copyN:`副本 {{n}}`,retryFailed:`重試失敗的`,retryOf:`#{{n}} 的重試`,pagination:`{{total}} 中的 {{start}}–{{end}}`,toast:{cancelled:`執行已取消`,cancelFailed:`取消失敗`,retryStarted:`已開始重試`,retryFailed:`重試失敗`,cleared:`已清除 {{n}} 次執行`,clearFailed:`清除失敗`},clearLog:`清除日誌`,clearConfirmTitle:`清除日誌？`,clearConfirmBody:`刪除所有已完成、失敗、已取消和部分失敗的管線執行？進行中的執行將保留。此操作無法復原。`,clearConfirmAction:`清除`,jobStatus:{pending:`等待中`,awaiting_printer:`等待印表機`,queued:`排隊中`,printing:`列印中`,completed:`已完成`,failed:`失敗`,cancelled:`已取消`},cancelledByUser:`使用者已取消`},queue:{filamentShort:{rowBadge:`所分配料盤的線材不足`,rowTooltip:`調度程式已標記此項目。點擊播放查看各槽位的不足量，並決定是否仍要列印。`,confirmTitle:`線材不足`,confirmIntro:`所分配的料盤至少有一個槽位無法滿足。仍要列印嗎？`,lineItem:`槽位 {{slot}}：需要 {{required}} g，剩餘 {{remaining}} g`,unknown:`不明`,printAnyway:`仍要列印`},slicerAmsMapping:{rowBadge:`已為此印表機儲存 AMS 槽位`,rowTooltip:`此封存保留了切片軟體選擇的確切 AMS 槽位，並為此項目的目標印表機儲存。在該印表機上重新列印時，可重複使用這些料盤，而不必再依類型與顏色重新比對。`},title:`列印佇列`,subtitle:`排程和管理您的列印任務`,editQueueItem:`編輯佇列項目`,selectAllPlates:`選擇全部 {{count}} 個熱床`,deselectAll:`取消全選`,printQueued:`已加入列印佇列`,printQueuedWillStartWhenIdle:`印表機閒置時將開始`,itemsQueued:`{{count}} 個任務已加入佇列`,sending:`傳送中...`,sendingProgress:`傳送中 {{current}}/{{total}}...`,adding:`新增中...`,addingProgress:`新增中 {{current}}/{{total}}...`,savingProgress:`儲存中 {{current}}/{{total}}...`,clearQueue:`清空佇列`,clearHistory:`清除歷史`,emptyQueue:`佇列為空`,position:`位置`,scheduledTime:`排程時間`,moveUp:`上移`,moveDown:`下移`,startNow:`立即開始`,printingInProgress:`列印進行中...`,viewArchive:`檢視歸檔`,viewInFileManager:`在檔案管理器中檢視`,itemCount:`{{count}} 個項目`,itemCount_plural:`{{count}} 個項目`,dragToReorder:`拖曳以重新排序（僅限盡快）`,reorderHint:`位置僅影響"儘快"項目。排程項目按設定時間執行。`,sjf:{label:`SJF`,tooltip:`最短任務優先 — 排程器優先處理較短的列印任務`},addedBy:`由 {{name}} 新增`,nextInQueue:`佇列中的下一個`,clearPlateSuccess:`列印板已清理 — 準備進行下一個列印`,plateNumber:`板 {{index}}`,quantity:`數量`,quantityHint:`建立 {{count}} 個佇列項目`,plateQuantityLabel:`{{plate}} 的列印次數`,plateQuantityTotal_one:`共 {{count}} 次`,plateQuantityTotal_other:`共 {{count}} 次`,batchOrders:{title:`批次訂單`,emptyTitle:`尚無批次訂單`,emptyDescription:`將多盤檔案或同一盤的多份副本加入佇列，訂單就會連同進度顯示在這裡。`,filter:{active:`進行中`,completed:`已完成`,cancelled:`已取消`,all:`全部`},status:{active:`進行中`,completed:`已完成`,cancelled:`已取消`},noTargets:`僅分組`,noTargetsHint:`建立於每盤目標數量之前，因此追蹤的是已加入佇列的列印，而不是目標數量。`,dispatchRemaining:`將剩餘 {{count}} 個加入佇列`,dispatchPlate:`將剩餘加入佇列`,strandedPlate:`沒有可複製設定的記錄`,strandedNotice:`仍欠的 {{owed}} 次列印中有 {{runs}} 次無法加入佇列：該板已沒有可複製設定的佇列中或已完成的列印。請從檔案中將該板加入佇列一次，或取消該訂單。`,dispatched:`已將 {{name}} 的剩餘列印加入佇列`,plateProgress:`已完成 {{completed}}/{{target}}`,remaining:`還差 {{count}} 個`,failed:`{{count}} 個失敗`,printing:`{{count}} 個列印中`,wholeFile:`整個檔案`,due:`截止 {{date}}`,costSoFar:`已花費 {{amount}}`,costRemaining:`(還需 {{amount}})`},activeBatches:`活躍批次`,batchProgress:`已完成 {{completed}}/{{total}}`,cancelBatch:`取消剩餘`,batchCancelled:`已取消剩餘批次項目`,cancelBatchConfirmTitle:`取消批次`,cancelBatchConfirmMessage:`結束此訂單？仍在佇列中的列印將被取消，訂單也不再要求尚未產出的部分。`,batch:{defaultName:`批次`,label:`{{count}} 項`,label_plural:`{{count}} 項`,pendingCount:`{{count}} 待處理`,pendingCount_plural:`{{count}} 待處理`,expand:`展開批次`,collapse:`收合批次`,groupAsBatch:`組合為批次…`,groupAsBatchDescription:`將選取的 {{count}} 項組合為一個可收合的批次。`,nameLabel:`批次名稱`,namePlaceholder:`例如：週五禮物`,create:`建立批次`,ungroup:`取消分組`,ungroupConfirmTitle:`取消批次分組？`,ungroupConfirmMessage:`項目將保留在佇列中，但不再分組在一起。`,dragGroup:`拖曳批次`},tabs:{batches:`批次`,queue:`佇列`,history:`歷史`,timeline:`時間軸`,pipelines:`管線`},layout:{flatList:`清單`,byPrinter:`依印表機`,groupByPrinter:`依印表機分組`},history:{emptyTitle:`目前沒有歷史記錄`,emptyDescription:`已完成、已取消與失敗的列印將顯示於此。`,showMore:`顯示更多`,showingCount:`顯示 {{total}} 項中的 {{shown}} 項`},dragGhost:{multiCount:`{{count}} 項`,batch:`{{name}}（{{count}} 份）`,batch_plural:`{{name}}（{{count}} 份）`},sections:{currentlyPrinting:`正在列印`,queued:`佇列中`,history:`歷史`},status:{pending:`等待中`,waiting:`等待中`,printing:`列印中`,paused:`已暫停`,completed:`已完成`,failed:`失敗`,skipped:`已跳過`,cancelled:`已取消`},summary:{printing:`列印中`,queued:`佇列中`,totalTime:`總佇列時間`,totalWeight:`總佇列重量`,history:`歷史`},filter:{allPrinters:`所有印表機`,unassigned:`未分配`,allStatus:`所有狀態`,allLocations:`所有位置`,any:`任意`},sort:{byPosition:`按位置排序`,byName:`按名稱排序`,byPrinter:`按印表機排序`,bySchedule:`按排程排序`,byDate:`按日期排序`,ascendingOldest:`升序（最舊優先）`,descendingNewest:`降序（最新優先）`},badges:{staged:`已暫存`,requiresPrevious:`需要前一個成功`,autoPowerOff:`自動關機`,gcodeInjection:`G-code`},empty:{title:`沒有排程的列印`,description:`從歸檔頁面使用右鍵選單中的"排程"選項來排程列印，或拖放檔案開始。`},time:{etaIfStartedNow:`若此工作現在開始的預計完成時間`,whenFree:`有空閒印表機時`,overdue:`已逾期`,now:`現在`,lessThanMinute:`不到一分鐘`,inMinutes:`{{count}} 分鐘後`,inHours:`{{count}} 小時後`},actions:{startPrint:`開始列印`,stopPrint:`停止列印`,requeue:`重新佇列`},bulkEdit:{title:`編輯 {{count}} 個項目`,title_plural:`編輯 {{count}} 個項目`,description:`僅更改的設定將套用於所選項目。`,printer:`印表機`,noChange:`— 不更改 —`,queueOptions:`佇列選項`,staged:`暫存（手動開始）`,autoPowerOff:`列印後自動關機`,requirePrevious:`要求前一個成功`,gcodeInjection:`注入G-code`,printOptions:`列印選項`,bedLevelling:`熱床調平`,flowCalibration:`流量校準`,vibrationCalibration:`振動校準`,layerInspection:`首層檢查`,timelapse:`縮時攝影`,useAms:`使用 AMS`,nozzleOffsetCali:`噴嘴偏移校準`,applyChanges:`套用更改`,selectAll:`全選`,deselectAll:`取消全選`,selected:`已選擇 {{count}} 個`,editSelected:`編輯所選`,cancelSelected:`取消所選`},confirm:{cancelTitle:`取消排程列印`,cancelMessage:`確定要取消"{{name}}"嗎？`,stopTitle:`停止列印`,stopMessage:`確定要停止目前列印"{{name}}"嗎？這將取消印表機上的列印任務。`,removeTitle:`從歷史中移除`,removeMessage:`確定要從佇列歷史中移除"{{name}}"嗎？`,clearHistoryTitle:`清除歷史`,clearHistoryMessage:`確定要從歷史中移除所有 {{count}} 個項目嗎？`,cancelButton:`取消列印`,stopButton:`停止列印`,thisPrint:`此列印`,thisItem:`此項目`},toast:{cancelled:`佇列項目已取消`,cancelFailed:`取消項目失敗`,removed:`佇列項目已移除`,keptForOrder:`已取消而非移除：這是批次訂單可以重新排入該板的唯一一次列印`,historyKeptForOrders:`保留了批次訂單仍需要的 {{kept}} 項。`,removeFailed:`移除項目失敗`,stopped:`列印已停止`,stopFailed:`停止列印失敗`,released:`列印已加入佇列`,startFailed:`開始列印失敗`,reorderFailed:`重新排序佇列失敗`,historyCleared:`已清除 {{count}} 條歷史紀錄`,clearHistoryFailed:`清除歷史失敗`,updateFailed:`更新項目失敗`,bulkCancelled:`已取消 {{count}} 個項目`,bulkCancelFailed:`批次取消項目失敗`,batchCreated:`已建立批次「{{name}}」`,batchCreateFailed:`建立批次失敗`,batchUngrouped:`已取消分組 {{count}} 項`,batchUngroupFailed:`取消批次分組失敗`,resumedAfterFailure:`已恢復佇列 — {{restored}} 個工作已恢復為待處理`,resumeAfterFailureFailed:`恢復佇列失敗`},resumeAfterFailure:{banner:`{{printer}} 因先前的列印失敗而被阻擋 — 已跳過 {{count}} 個工作`,bannerHint:`解決印表機問題後恢復佇列，以還原跳過的工作並清除阻擋。`,button:`失敗後恢復`,confirmTitle:`失敗後恢復佇列？`,confirmMessage:`將 {{printer}} 上的 {{count}} 個跳過的工作恢復為待處理，並清除上一個列印的阻擋。繼續前請確認印表機已就緒。`},timeline:{listView:`列表`,timelineView:`時間線`,unassigned:`未分配`,noData:`當天沒有計畫的列印任務`,nothingCommitted:`此時間視窗內沒有已確定的排程。暫存項目、等待項目以及閒置印表機上的 ASAP 任務不會顯示 — 設定排程時間或釋放暫存項目即可在此處查看。`,allDoneBy:`所有列印預計在 {{time}} 前完成`,staged:`暫存`,filterAll:`全部顯示`,filterPrinting:`列印中`,filterQueued:`佇列中`,time:{anyMoment:`即將完成`,minutesLeft:`剩餘{{minutes}} 分鐘`,hoursLeft:`剩餘{{hours}}小時`,hoursMinutesLeft:`剩餘{{hours}}小時{{minutes}} 分鐘`},day:{previous:`前一天`,next:`後一天`,today:`今天`},window:{back12h:`後退 12 小時`,forward12h:`前進 12 小時`,now:`現在`},printerColumnHeader:`印表機`},permissions:{noStopPrint:`您沒有停止列印的權限`,noStartPrint:`您沒有開始列印的權限`,noEdit:`您沒有編輯此佇列項目的權限`,noCancel:`您沒有取消此佇列項目的權限`,noRequeue:`您沒有重新佇列的權限`,noRemove:`您沒有移除此佇列項目的權限`,noClearHistory:`您沒有清除所有歷史的權限`,noEditItems:`您沒有編輯佇列項目的權限`,noCancelItems:`您沒有取消佇列項目的權限`}},stats:{title:`統計`,subtitle:`拖曳小工具以重新排列。點選眼睛圖示隱藏。`,overview:`概覽`,totalPrints:`總列印次數`,successRate:`成功率`,totalPrintTime:`總列印時間`,printTime:`列印時間`,totalFilament:`總耗材用量`,filamentUsed:`耗材用量`,filamentCost:`耗材成本`,totalCost:`總成本`,energyUsed:`能耗`,energyCost:`能源成本`,energyWarmingUpTooltip:`能耗追蹤正在收集每小時快照。當所選範圍之前至少存在一個快照時，時間段合計將變得準確。早期數值可能偏低。`,averagePrintTime:`平均列印時間`,printsPerDay:`每日列印次數`,byPrinter:`按印表機`,printsByPrinter:`各印表機列印次數`,byMaterial:`按材料`,byMonth:`按月份`,last7Days:`最近 7 天`,last30Days:`最近 30 天`,last90Days:`最近 90 天`,allTime:`全部時間`,quickStats:`快速統計`,printActivity:`列印活動`,filamentTypes:`耗材類型`,filamentTrends:`耗材趨勢`,failureAnalysis:`失敗分析`,timeAccuracy:`時間準確度`,successful:`成功：`,failed:`失敗：`,cancelled:`已取消：`,perfectEstimate:`100% = 完美估計`,noTimeAccuracyData:`尚無時間準確度資料`,noFilamentData:`尚無耗材資料`,noPrinterData:`尚無印表機資料`,noPrintData:`尚無列印資料`,noPrintDataLast30Days:`最近 30 天無列印資料`,failureReasons:`失敗原因`,topFailureReasons:`主要失敗原因`,failedPrintsCount:`{{failed}} / {{total}} 次列印失敗`,lastWeekRate:`上週：{{rate}}%`,resetLayout:`重設佈局`,recalculateCosts:`重新計算成本`,recalculateCostsHint:`使用目前耗材價格重新計算所有歸檔成本`,exportStats:`匯出統計`,exportAsCsv:`匯出為 CSV`,exportAsExcel:`匯出為 Excel`,hiddenCount:`{{count}} 個已隱藏`,exportDownloaded:`匯出已下載`,exportFailed:`匯出失敗`,layoutReset:`佈局已重設`,recalculatedCosts:`已為 {{count}} 個歸檔重新計算成本`,recalculateFailed:`重新計算成本失敗`,loadingStats:`載入統計資料中...`,noPermissionResetLayout:`您沒有重設佈局的權限`,noPermissionRecalculate:`您沒有重新計算成本的權限`,noPrintDataInRange:`所選範圍內無列印資料`,periodFilament:`期間耗材`,periodCost:`期間成本`,avgPerPrint:`每次列印平均`,usageOverTime:`隨時間的使用量`,energyOverTime:`隨時間的能耗`,filamentByWeight:`重量`,printDuration:`列印時長`,printerUtilization:`印表機利用率`,filamentSuccess:`按材料成功率`,printHabits:`列印習慣`,printTimeOfDay:`列印時段`,colorDistribution:`顏色分佈`,noColorData:`尚無顏色資料`,records:`紀錄`,longestPrint:`最長列印`,heaviestPrint:`最重列印`,mostExpensivePrint:`最貴列印`,busiestDay:`最忙碌的一天`,successStreak:`連續成功`,streakPrint:`連續列印`,streakPrints:`{{count}} 次連續列印`,printerStats:`印表機統計`,hours:`小時`,avgPrints:`平均列印`,noArchiveData:`尚無列印資料`,filamentByTime:`時間`,avgWeight:`平均重量`,avgTime:`平均時間`,filamentByPrints:`列印次數`,timeframe:{today:`今天`,"this-week":`本週`,"this-month":`本月`,"last-7":`最近 7 天`,"last-30":`最近 30 天`,"last-90":`最近 90 天`,"this-year":`今年`,"all-time":`全部時間`,custom:`自訂範圍`,from:`從`,to:`到`},allUsers:`所有使用者`,noUser:`無使用者（系統）`,filterByUser:`按使用者篩選`},maintenance:{title:`維護`,overview:`概覽`,allOk:`所有維護均已完成`,dueCount:`{{count}} 項到期`,dueCount_plural:`{{count}} 項到期`,warningCount:`{{count}} 個警告`,warningCount_plural:`{{count}} 個警告`,totalPrintTime:`總列印時間`,nextMaintenance:`下次維護`,nothingDue:`無到期項目`,tasks:`任務`,lastPerformed:`上次執行`,interval:`間隔`,hoursRemaining:`剩餘 {{hours}} 小時`,hoursOverdue:`逾期 {{hours}} 小時`,markDone:`標記為完成`,performMaintenance:`執行維護`,history:`歷史`,noHistory:`無維護歷史`,editPrintHours:`編輯列印時間`,currentHours:`目前小時數`,statusTab:`狀態`,settingsTab:`設定`,overdueCount:`{{count}} 個逾期`,dueSoonCount:`{{count}} 個即將到期`,dueSoon:`即將到期`,allGood:`一切正常`,overdueBy:`逾期 {{duration}}`,dueIn:`{{duration}} 後到期`,timeLeft:`剩餘 {{duration}}`,day:`1 天`,days:`{{count}} 天`,week:`1 週`,weeks:`{{count}} 週`,month:`1 個月`,months:`{{count}} 個月`,year:`1 年`,maintenanceTypes:`維護類型`,maintenanceTypesDescription:`系統類型和您的自訂維護任務`,addCustomType:`新增自訂類型`,restoreDefaults:`恢復預設任務`,intervalType:`間隔類型`,intervalValue:`間隔 ({{type}})`,icon:`圖示`,documentationLink:`說明文件連結（可選）`,assignToPrinters:`分配給印表機`,selectAtLeastOnePrinter:`至少選擇一臺印表機`,addType:`新增類型`,custom:`自訂`,printHours:`列印小時數`,calendarDays:`日曆天數`,exampleName:`例如：更換 HEPA 過濾器`,viewDocumentation:`檢視說明文件`,timeBasedInterval:`基於時間的間隔`,intervalOverrides:`間隔覆蓋`,intervalOverridesDescription:`為特定印表機自訂間隔`,assignedToPrinters:`已分配給印表機：`,noPrintersAssigned:`未分配印表機`,addPrinterShort:`新增：`,printersAssignedClick:`已分配 {{count}} 臺印表機 - 點選管理`,removeFromPrinter:`從此印表機移除`,types:{lubricateCarbonRods:`潤滑碳纖維杆`,lubricateRails:`潤滑線性導軌`,cleanNozzle:`清潔噴嘴/熱端`,checkBelts:`檢查皮帶張力`,cleanBuildPlate:`清潔列印板`,checkExtruder:`檢查擠出機齒輪`,checkCooling:`檢查冷卻風扇`,generalInspection:`綜合檢查`,cleanCarbonRods:`清潔碳纖維杆`,lubricateSteelRods:`潤滑鋼杆`,cleanSteelRods:`清潔鋼杆`,cleanLinearRails:`清潔線性導軌`,checkPtfeTube:`檢查 PTFE 管`,replaceHepaFilter:`更換 HEPA 過濾器`,replaceCarbonFilter:`更換活性炭過濾器`,lubricateLeftNozzleRail:`潤滑左噴嘴導軌`},maintenanceComplete:`維護已標記為完成`,typeUpdated:`維護類型已更新`,typeDeleted:`維護類型已刪除`,defaultsRestored:`已恢復 {{count}} 個預設任務`,printHoursUpdated:`列印小時數已更新`,printerAssigned:`印表機已分配`,printerRemoved:`印表機已移除`,deleteTypeConfirm:`刪除"{{name}}"？`,deleteSystemTypeTitle:`刪除預設維護任務？`,deleteSystemTypeMessage:`確定要刪除預設維護任務"{{name}}"嗎？`,noPermissionUpdate:`您沒有更新維護項目的權限`,noPermissionPerform:`您沒有執行維護的權限`,noPermissionEditTypes:`您沒有編輯維護類型的權限`,noPermissionDeleteTypes:`您沒有刪除維護類型的權限`,noPermissionEditHours:`您沒有編輯列印時間的權限`,noPermissionRemovePrinter:`您沒有移除印表機分配的權限`,noPermissionAssignPrinter:`您沒有分配印表機的權限`,noPermissionEditIntervals:`您沒有編輯間隔的權限`,configureSettings:`設定維護類型和間隔`},settings:{sliceEngine:`切片引擎`,sliceEngineSidecar:`伺服器 sidecar`,sliceEngineSidecarHint:`切片在伺服器上的切片 sidecar 容器中執行。`,sliceEngineBrowser:`在瀏覽器中`,sliceEngineBrowserHint:`切片在本裝置上執行，不經過伺服器。`,title:`設定`,general:`通用`,tabs:{general:`通用`,smartPlugs:`智慧插座`,sensors:`感測器`,notifications:`通知`,queue:`工作流程`,queueDispatch:`佇列與分派`,queuePipelines:`管線`,filament:`耗材`,network:`網路`,apiKeys:`API 金鑰`,virtualPrinter:`虛擬印表機`,spoolbuddy:`SpoolBuddy`,failureDetection:`故障檢測`,users:`身份驗證`,backup:`備份`,emailAuth:`信箱認證`,ldap:`LDAP`,twoFa:`雙因素認證`,oidc:`SSO / OIDC`,security:`安全`},spoolbuddy:{infoTitle:`SpoolBuddy 裝置`,infoBody:`SpoolBuddy kiosk 透過心跳自動註冊。如果裝置不再使用，或守護程式當機遺留了過時的重複項，可在此取消註冊。`,duplicatesTitle:`已註冊 {{count}} 台裝置`,duplicatesBody:`kiosk 介面只使用最先註冊的裝置。如果其中有因當機遺留的過時重複項，請取消註冊它——線上裝置會在下次心跳時重新註冊自己。`,empty:`尚未註冊任何 SpoolBuddy 裝置。`,online:`線上`,offline:`離線`,unregister:`取消註冊`,unregisterSuccess:`裝置已取消註冊`,unregisterError:`取消註冊裝置失敗`,confirmTitle:`取消註冊 SpoolBuddy 裝置？`,confirmBody:`將從資料庫中移除 "{{hostname}}" ({{deviceId}})。如果裝置線上，會在下次心跳時重新註冊自己。`,ipAddress:`IP 位址`,firmware:`韌體`,lastSeen:`上次線上`,daemonUptime:`守護程式執行時間`,systemUptime:`系統執行時間`,never:`從未`,nfc:`NFC`,scale:`磅秤`,cpuTemp:`CPU 溫度`,cpuLoad:`CPU 負載`,memory:`記憶體`,disk:`磁碟`,update:`更新`,updateConfirmTitle:`更新 SpoolBuddy 守護程式？`,updateConfirmBody:`對 "{{hostname}}" 觸發軟體更新？更新完成後守護程式將重新啟動。`,restartBrowser:`重新啟動瀏覽器`,restartBrowserConfirmTitle:`重新啟動 kiosk 瀏覽器？`,restartBrowserConfirmBody:`在 "{{hostname}}" 上重新啟動 kiosk 瀏覽器？顯示將短暫黑屏。`,restartDaemon:`重新啟動守護程式`,restartDaemonConfirmTitle:`重新啟動 SpoolBuddy 守護程式？`,restartDaemonConfirmBody:`在 "{{hostname}}" 上重新啟動 SpoolBuddy 守護程式？裝置將離線幾秒鐘。`,reboot:`重新開機`,rebootConfirmTitle:`重新開機？`,rebootConfirmBody:`重新開機 "{{hostname}}"？裝置將離線約一分鐘。`,shutdown:`關機`,shutdownConfirmTitle:`關閉裝置？`,shutdownConfirmBody:`關閉 "{{hostname}}"？您需要實體存取才能重新開機。`,commandConfirm:`確認`,commandQueued:`命令已加入佇列`,commandError:`傳送命令失敗`},ldap:{title:`LDAP 認證`,enabledDesc:`LDAP 認證已啟用`,disabledDesc:`LDAP 認證已停用`,disabledHint:`在下方設定並儲存 LDAP 設定，然後啟用。`,enabled:`LDAP 認證已啟用`,disabled:`LDAP 認證已停用`,feature1:`使用者可以使用 LDAP 憑據登入`,feature2:`本機管理員帳戶作為後備保留`,feature3:`登入時 LDAP 群組對應到 BamBuddy 群組`,serverConfig:`LDAP 伺服器設定`,serverUrl:`伺服器 URL`,serverUrlHint:`使用 ldap:// 進行標準連線或 ldaps:// 進行 SSL 連線`,security:`安全`,securityHint:`StartTLS 將普通連線升級為 TLS。LDAPS 從一開始就使用 TLS。`,bindDn:`繫結 DN（服務帳戶）`,bindPassword:`繫結密碼`,searchBase:`搜尋基礎 DN`,userFilter:`使用者搜尋過濾器`,userFilterHint:`{username} 替換為登入使用者名稱。OpenLDAP 使用 (uid={username})。`,advanced:`進階`,autoProvision:`自動建立使用者`,autoProvisionHint:`首次 LDAP 登入時自動建立 BamBuddy 帳戶`,defaultGroup:`預設群組`,defaultGroupNone:`— 無（無復原）—`,defaultGroupHint:`當 LDAP 使用者透過身份驗證但不在任何已對應的 LDAP 群組中時分配的備援群組。留空以使未對應的使用者沒有權限。`,groupMapping:`群組對應（JSON）`,groupMappingHint:`將 LDAP 群組 DN 對應到 BamBuddy 群組。可用群組：`,testConnection:`測試連線`,settingsSaved:`LDAP 設定已儲存`,errors:{serverRequired:`LDAP 伺服器 URL 為必填項`,searchBaseRequired:`搜尋基礎 DN 為必填項`,enableAuthFirst:`請先啟用認證`,configureLdapFirst:`請先儲存 LDAP 設定`}},email:{smtpSettings:`SMTP 設定`,smtpHost:`SMTP 伺服器`,smtpPort:`SMTP 連接埠`,security:`安全`,authentication:`認證`,username:`使用者名稱`,password:`密碼`,fromEmail:`寄件信箱`,fromName:`寄件人名稱`,testConnection:`測試 SMTP 連線`,testRecipient:`測試收件信箱`,sendTest:`傳送測試郵件`,sending:`傳送中...`,save:`儲存設定`,saving:`儲存中...`,advancedAuth:`進階認證`,advancedAuthEnabled:`進階認證已啟用`,advancedAuthEnabledDesc:`基於信箱的使用者管理功能已啟用。新使用者將透過郵件收到自動產生的密碼，使用者可以透過忘記密碼功能重設密碼。`,advancedAuthDisabled:`進階認證已停用`,advancedAuthDisabledDesc:`啟用進階認證以啟用基於信箱的使用者管理功能。`,enable:`啟用`,disable:`停用`,feature1:`密碼自動產生並透過郵件傳送給新使用者`,feature2:`使用者可以使用使用者名稱或信箱登入`,feature3:`忘記密碼功能可用`,feature4:`管理員可以透過郵件重設使用者密碼`,errors:{requiredFields:`請填寫所有必填欄位`,usernameRequired:`啟用認證時需要使用者名稱`,enterTestEmail:`請輸入測試信箱地址`,smtpServerAndEmail:`測試前請填寫 SMTP 伺服器和寄件信箱`,usernamePasswordRequired:`啟用認證時需要使用者名稱和密碼`,configureSmtpFirst:`請先設定並測試 SMTP 設定`,enableAuthFirst:`請先啟用身份驗證才能使用基於電子郵件的功能。`},success:{settingsSaved:`SMTP 設定儲存成功`},securityOptions:{starttls:`STARTTLS（連接埠 587）`,ssl:`SSL/TLS（連接埠 465）`,none:`無（連接埠 25）`},authOptions:{enabled:`已啟用`,disabled:`已停用`}},appearance:`外觀`,notifications:`通知`,smartPlugs:`智慧插座`,spoolman:`Spoolman`,updates:`更新`,language:`語言`,languageDescription:`選擇您的首選語言`,theme:`主題`,themeLight:`淺色`,themeDark:`深色`,themeSystem:`跟隨系統`,defaultView:`預設檢視`,defaultViewDescription:`開啟應用程式時顯示的頁面`,checkForUpdates:`檢查更新`,autoUpdate:`自動更新`,currentVersion:`目前版本`,latestVersion:`最新版本`,upToDate:`已是最新版本`,updateAvailable:`有可用更新`,notificationLanguage:`通知語言`,notificationLanguageDescription:`推送通知的語言`,bedCooledThreshold:`熱床冷卻閾值`,bedCooledThresholdDescription:`列印後熱床被視為已冷卻的溫度`,userNotificationsEnabled:`使用者通知`,userNotificationsEnabledDescription:`啟用使用者通知選單和列印任務事件的郵件通知。需要進階身份驗證。`,userNotificationsDisabledHint:`請啟用進階身份驗證以使用使用者通知。`,notificationProviders:`通知提供者`,addProvider:`新增提供者`,editProvider:`編輯提供者`,providerType:`提供者類型`,testNotification:`測試通知`,testSuccess:`測試通知傳送成功`,testFailed:`傳送測試通知失敗`,quietHours:`免打擾時間`,quietHoursDescription:`在此時間段內不傳送通知`,quietHoursStart:`開始`,quietHoursEnd:`結束`,events:{title:`通知事件`,printStart:`列印開始`,printComplete:`列印完成`,printFailed:`列印失敗`,printStopped:`列印停止`,printProgress:`進度里程碑`,printProgressDescription:`在 25%、50%、75% 時通知`,printerOffline:`印表機離線`,printerError:`印表機錯誤`,filamentLow:`耗材不足`,maintenanceDue:`維護到期`,maintenanceDueDescription:`需要維護時通知`},smartPlug:{title:`智慧插座`,add:`新增智慧插座`,edit:`編輯智慧插座`,name:`名稱`,ipAddress:`IP 位址`,linkedPrinter:`連結印表機`,autoOn:`自動開啟`,autoOnDescription:`列印開始時開啟`,autoOff:`自動關閉`,autoOffDescription:`列印完成後關閉`,offDelay:`關閉延遲`,offDelayMinutes:`列印後分鐘數`,offDelayTemp:`當噴嘴溫度低於`,currentState:`目前狀態`,turnOn:`開啟`,turnOff:`關閉`},filamentTracking:`耗材追蹤`,filamentTrackingDesc:`選擇如何追蹤您的耗材。您可以使用內建庫存或連線外部 Spoolman 伺服器。`,autoAddUnknownRfid:`自動新增未知 RFID 料盤`,autoAddUnknownRfidDesc:`偵測到具有未知 RFID 標籤的料盤時，自動建立庫存項目。如果您手動預先註冊新料盤以避免重複，請關閉此項。`,filamentChecks:`耗材檢查`,disableFilamentWarnings:`停用耗材警告`,disableFilamentWarningsDesc:`在列印或加入佇列時不顯示耗材不足警告`,preferLowestFilament:`優先使用剩餘最少的耗材`,preferLowestFilamentDesc:`當多個料盤匹配時，使用剩餘耗材最少的那個`,preferLowestFilamentBackupNote:`僅當印表機端啟用了 AMS 備用料盤時才生效——否則當選中的料盤耗盡時，印表機無法切換到備用料盤。`,trackingModeBuiltIn:`內建庫存`,trackingModeBuiltInDesc:`包含 RFID 自動匹配和用量追蹤`,trackingModeSpoolmanDesc:`外部耗材管理伺服器`,builtInFeatureRfid:`自動檢測 AMS 中的拓竹 RFID 耗材`,builtInFeatureUsage:`追蹤每次列印的耗材消耗`,builtInFeatureCatalog:`管理耗材、顏色和 K 值設定檔案`,builtInFeatureThirdParty:`第三方耗材可分配到庫存耗材`,amsSyncButton:`從 AMS 同步重量`,amsSyncTitle:`從 AMS 同步耗材重量`,amsSyncMessage:`這將使用已連線印表機的目前 AMS 剩餘百分比值覆蓋所有庫存耗材重量。用於從損壞的重量資料中恢復。印表機必須線上。`,amsSyncing:`同步中...`,amsSyncSuccess:`已同步 {{synced}} 個耗材，跳過 {{skipped}} 個`,amsSyncError:`從 AMS 同步重量失敗`,spoolmanAmsSyncButton:`從 AMS 同步 Spoolman 重量`,spoolmanAmsSyncTitle:`從 AMS 同步 Spoolman 耗材重量`,spoolmanAmsSyncMessage:`這將根據已連線印表機的目前 AMS 剩餘百分比值更新所有 Spoolman 耗材重量。印表機必須線上。`,spoolmanAmsSyncing:`同步中...`,spoolmanAmsSyncSuccess:`已同步 {{synced}} 個 Spoolman 耗材，跳過 {{skipped}} 個`,spoolmanAmsSyncError:`從 AMS 同步 Spoolman 重量失敗`,spoolmanAmsSyncErrorUnreachable:`同步失敗（Spoolman 無法存取）`,spoolmanAmsSyncErrorNotConfigured:`同步失敗（Spoolman 未設定）`,spoolmanNotConfigured:`Spoolman 未設定`,spoolmanFilamentCatalogTitle:`Spoolman 耗材目錄`,spoolmanFilamentCatalogDesc:`來自 Spoolman 的耗材名稱和皮重。名稱和線軸重量可在此處編輯；其他屬性請直接在 Spoolman 中管理。`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`Spoolman 伺服器的 URL（例如 http://localhost:7912）`,spoolmanConnected:`已連線`,spoolmanDisconnected:`未連線`,status:`狀態`,connect:`連線`,disconnect:`斷開`,howSyncWorks:`同步工作原理`,syncInfoRfidOnly:`僅同步帶有 RFID 的官方拓竹耗材`,syncInfoAutoCreate:`首次同步時自動在 Spoolman 中建立新耗材`,syncInfoThirdPartySkipped:`非拓竹耗材（第三方、重新填充的）將被跳過`,linkingExistingSpools:`連結現有耗材`,linkingExistingSpoolsDesc:`要將現有的 Spoolman 耗材連結到您的 AMS，請將滑鼠懸停在 AMS 槽位上並點選"連結到 Spoolman"。`,syncMode:`同步模式`,syncModeAuto:`自動`,syncModeManual:`僅手動`,syncModeAutoDesc:`偵測到更改時自動同步 AMS 資料`,syncModeManualDesc:`僅在手動觸發時同步`,syncAmsData:`同步 AMS 資料`,syncAmsDataDesc:`手動將印表機 AMS 資料同步到 Spoolman`,allPrinters:`所有印表機`,noDefaultPrinter:`無預設（每次詢問）`,sidebarOrder:`側邊欄順序`,saveThumbnails:`儲存縮圖`,captureFinishPhoto:`拍攝完成照片`,noPrintersConfigured:`未設定印表機`,archiveMode:{always:`始終建立歸檔條目`,never:`從不建立歸檔條目`,ask:`每次詢問`},checkForUpdatesLabel:`檢查更新`,checkPrinterFirmware:`檢查印表機韌體`,includeBetaUpdates:`包含測試版本`,includeBetaUpdatesDesc:`檢查更新時通知測試版和預發布版本`,localLogin:{disable:`停用本機使用者名稱／密碼登入`,disableHint:`啟用後，只能透過SSO提供者登入。LDAP不受影響。在伺服器上設定 BAMBUDDY_LOCAL_LOGIN=true 可保留復原途徑。`},enableRetry:`啟用重試`,homeAssistantDescription:`透過 Home Assistant 控制智慧插座`,environmentManagedLabel:`（環境變數管理）`,autoEnabledViaEnv:`透過環境變數自動啟用`,urlFromEnvReadOnly:`值由 HA_URL 環境變數設定（只讀）`,tokenFromEnvReadOnly:`值由 HA_TOKEN 環境變數設定（只讀）`,mqttConnectedTo:`已連線到`,prometheusDescription:`以 Prometheus 格式暴露印表機資料`,noSmartPlugsTitle:`未設定智慧插座`,noSmartPlugsDescription:`新增基於 Tasmota 的智慧插座以追蹤能耗並自動化電源控制。`,noProvidersTitle:`未設定提供者`,noProvidersDescription:`新增提供者以接收警報。`,noTemplatesAvailable:`無可用範本。重新啟動後端以載入預設範本。`,apiPermissionView:`檢視印表機狀態和佇列`,apiPermissionEdit:`新增和移除列印佇列中的項目`,apiKeysEmptyTitle:`無 API 金鑰`,apiKeysEmptyDescription:`建立 API 金鑰以與外部服務整合。`,noUsersFound:`未找到使用者`,noGroupsFound:`未找到群組`,noGroupsAvailable:`無可用群組`,passwordsDoNotMatch:`密碼不符`,systemGroupWarning:`系統群組名稱不可更改`,authDisabledTitle:`身份驗證已停用`,authDisabledFeature1:`需要登入才能存取系統`,authDisabledFeature2:`建立多個使用者並基於群組的權限管理`,authDisabledFeature3:`使用 50+ 個細粒度權限控制存取`,userHasCreated:`此使用者已建立：`,userItemsQuestion:`您想如何處理這些項目？`,deleteUserConfirm:`確定要刪除此使用者嗎？`,actionCannotBeUndone:`此操作無法復原。`,addFirstSmartPlug:`新增您的第一個智慧插座`,providers:`提供者`,log:`日誌`,testAll:`全部測試`,testResults:`測試結果`,testPassedCount:`{{count}} 個透過`,testFailedCount:`{{count}} 個失敗`,messageTemplates:`訊息範本`,messageTemplatesDescription:`自訂每個事件的通知訊息。`,apiKeys:`API 金鑰`,apiKeysDescription:`建立 API 金鑰用於外部整合和 Webhook。`,createKey:`建立金鑰`,apiKeyCreated:`API 金鑰建立成功`,apiKeyCopyWarning:`請立即複製此金鑰 - 它不會再次顯示！`,useInApiBrowser:`在 API 瀏覽器中使用`,apiKeyQrButton:`二維碼`,apiKeyQrTitle:`掃碼設定`,apiKeyQrCaption:`使用手機應用程式掃描以新增此伺服器和 API 金鑰。`,apiKeyQrWarning:`包含您的機密 API 金鑰——請勿在他人可見的地方分享或截圖。`,createNewApiKey:`建立新 API 金鑰`,keyName:`金鑰名稱`,keyNamePlaceholder:`例如：Home Assistant、OctoPrint`,readStatus:`讀取狀態`,readStatusDescription:`檢視印表機狀態、佇列、資料庫、封存和切片機管線`,manageQueue:`管理佇列`,manageQueueDescription:`新增和移除列印佇列中的項目。搭配「管理資料庫」可執行切片機管線`,controlPrinter:`控制印表機`,controlPrinterDescription:`暫停、繼續和停止列印`,manageLibrary:`管理資料庫`,manageLibraryDescription:`上傳、重新命名、刪除與切片資料庫檔案；從 MakerWorld 匯入模型。搭配「管理佇列」可執行切片機管線`,manageInventory:`管理庫存`,manageInventoryDescription:`建立、更新與刪除耗材盤與庫存記錄。SpoolBuddy 終端（NFC 掃描、秤讀取、終端系統指令）需要此權限。`,manageMaintenance:`管理維護`,manageMaintenanceDescription:`記錄已完成的維護、重設計數器、編輯間隔並管理維護類型目錄。適用於在不授予更廣泛印表機控制權限的情況下記錄「我清潔了噴嘴」的 Home Assistant 自動化。`,manageArchives:`管理列印封存`,manageArchivesDescription:`編輯和刪除列印封存，包括移除舊的列印及其統計資料貢獻。適用於精簡列印歷史的自動化。`,manageProjects:`管理專案`,manageProjectsDescription:`建立、更新和刪除專案，並向其新增封存。適用於將列印整理到專案中的自動化。`,maintenanceBadge:`維護`,archivesBadge:`封存`,projectsBadge:`專案`,libraryBadge:`資料庫`,inventoryBadge:`庫存`,cloudAccess:`允許雲端存取`,cloudAccessDescription:`代表您讀取 Bambu Cloud 預設和耗材。需要登入 Bambu Cloud。`,cloudBadge:`雲端`,updateEnergyCost:`更新電價`,updateEnergyCostDescription:`允許此金鑰向 /settings/electricity-price POST 新的每千瓦時電價。適用於 Home Assistant 動態電價自動化（Tibber、Octopus 等）。這是唯一可透過 API 金鑰寫入的設定欄位。`,energyCostBadge:`能耗`,legacyKey:`舊版`,legacyKeyTooltip:`在按使用者所有權之前建立；需重建以使用雲端存取`,unnamedKey:`未命名金鑰`,lastUsed:`上次使用`,read:`讀取`,control:`控制`,createFirstKey:`建立您的第一個金鑰`,webhookEndpoints:`Webhook 端點`,webhookApiKeyHint:`在 X-API-Key 請求頭中使用您的 API 金鑰。`,webhook:{getAllStatus:`獲取所有印表機狀態`,getSpecificStatus:`獲取特定印表機狀態`,addToQueue:`新增到列印佇列`,pausePrint:`暫停列印`,resumePrint:`繼續列印`,stopPrint:`停止列印`},apiBrowser:`API 瀏覽器`,apiBrowserDescription:`瀏覽和測試所有可用的 API 端點。`,apiKeyForTesting:`測試用 API 金鑰`,apiKeyPlaceholder:`在此貼上您的 API 金鑰以測試需要認證的端點...`,apiKeyHint:`此金鑰將作為 X-API-Key 請求頭隨請求傳送。`,deleteApiKeyTitle:`刪除 API 金鑰`,deleteApiKeyMessage:`確定要刪除此 API 金鑰嗎？使用此金鑰的所有整合將停止工作。`,deleteKey:`刪除金鑰`,amsDisplayThresholds:`AMS 顯示閾值`,amsThresholdsDescription:`設定 AMS 濕度和溫度指示器的顏色閾值。`,humidity:`濕度`,goodGreen:`良好（綠色）`,fairOrange:`一般（橙色）`,aboveFairBad:`超過一般閾值顯示為紅色（差）`,fairAlsoDryingThreshold:`此閾值也用於觸發自動乾燥`,fairBelowDryingFloor:`自動乾燥無法達到此值：AMS 在加熱時讀數為 {{floor}}% 或更高，因此每個週期都會結束並立即重新開始。若使用自動乾燥，請將其設為高於 {{floor}}%。`,temperature:`溫度`,goodBlue:`良好（藍色）`,aboveFairHot:`超過一般閾值顯示為紅色（熱）`,tempAlarmThreshold:`警報閾值`,tempAlarmSeparateFromBand:`只有警報閾值會發送通知，良好與一般僅用於顯示配色。留空則與先前一致，在一般閾值觸發警報。`,tempAlarmMustBePositive:`小於或等於 0 的閾值將被忽略，警報改用一般閾值。`,historyRetention:`歷史保留`,keepSensorHistory:`保留感測器歷史`,historyRetentionDescription:`較舊的濕度和溫度資料將被自動刪除`,defaultPrintOptions:`預設列印選項`,defaultPrintOptionsDescription:`設定新列印的預設選項值。可在列印對話方塊中逐次覆蓋。`,defaultBedLevelling:`熱床調平`,defaultBedLevellingDesc:`列印前自動調平熱床`,defaultFlowCali:`流量校準`,defaultFlowCaliDesc:`校準擠出流量`,defaultVibrationCali:`振動校準`,defaultVibrationCaliDesc:`減少振紋偽影`,defaultLayerInspect:`首層檢測`,defaultLayerInspectDesc:`AI首層檢測`,defaultTimelapse:`縮時攝影`,defaultTimelapseDesc:`錄製縮時攝影影片`,defaultNozzleOffsetCali:`噴嘴偏移校準`,defaultNozzleOffsetCaliDesc:`校準兩個擠出機之間的噴嘴偏移`,tempFanPresetsTitle:`溫度與風扇預設`,tempFanPresetsDescription:`自訂印表機卡片溫度和風扇速度彈出視窗中顯示的快速選擇值。「關閉」按鈕始終顯示。`,tempFanPresetsNozzle:`噴嘴溫度`,tempFanPresetsBed:`熱床溫度`,tempFanPresetsChamber:`腔室溫度`,tempFanPresetsFan:`風扇速度`,tempFanPresetsReset:`還原預設值`,concurrentUploadsTitle:`並行上傳`,concurrentUploadsDescription:`佇列可同時向多少台印表機傳送檔案。印表機接收檔案的速度很慢（大型列印可能需要數分鐘），而且每台都得排隊等候——因此在印表機較多時，調高此值可避免批次中最後一台印表機等完前面所有傳輸。若網路或 Bambuddy 主機難以負荷並行傳輸，請調低此值。`,concurrentUploadsLabel:`同時上傳的印表機數量`,concurrentUploadsHelp:`設為 1 時一次只傳送給一台印表機（舊行為）。預設值為 4。`,staggeredStart:`錯開啟動`,staggeredStartDescription:`多台印表機批次啟動時的預設群組大小與間隔。可在列印對話框中逐批覆寫。`,preheatTitle:`預熱與熱保溫`,preheatDescription:`在每個佇列列印開始前預熱熱床（如支援則包含腔體）並維持溫度。對於沒有腔體主動加熱的印表機使用工程材料（PA、ABS）相當有用 — 保溫計時進行時，熱床透過輻射溫暖腔體。熱床目標溫度從列印檔案讀取；腔體行為取決於印表機型號。`,preheatEnabled:`啟用預熱與保溫`,preheatEnabledDesc:`關閉時，佇列列印立即開始。每個佇列項目可依單次列印覆寫。`,preheatFilamentTargetsLabel:`依耗材的腔體目標 (°C)`,preheatFilamentTargetsHint:`Bambuddy 在已裝入的 AMS 槽位中挑選最高目標；所有槽位都推導為 0 的列印（PLA、PETG、TPU、PVA）會完全跳過預熱並立即開始。`,preheatFilamentTargetsReset:`重設為預設值`,preheatFilamentTargetsDefaultRow:`其他 / 未對應`,preheatMaxWait:`最長等待（秒）`,preheatMaxWaitHelp:`進入保溫階段前的腔體預熱階段上限。`,preheatSoak:`保溫（秒）`,preheatSoakHelp:`達到目標或最長等待結束後的維持時間。`,preheatHardwareTitle:`依印表機的行為：`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E 透過 M141 主動加熱腔體。X1C/P2S 讀取腔體溫度但僅靠熱床輻射加熱。P1S/P1P/A1/A1 Mini 無腔體感測器 — 僅保溫計時器生效。`,preheatPerItemDesc:`在本次列印開始前預熱熱床與腔體。預設使用設定 → 工作流程的全域開關。`,preheatOverride_inherit:`繼承`,preheatOverride_on:`開啟`,preheatOverride_off:`關閉`,calibrationMode_off:`關閉`,calibrationMode_on:`開啟`,calibrationMode_auto:`自動`,preheatTargetOverride:`覆寫腔體目標 (°C，留空使用耗材預設)`,preheatTargetOverrideHelp:`0 表示只加熱熱床並執行保溫，不加熱腔體。留空時，不需要腔體加熱的列印會完全跳過預熱。`,plateClear:`熱床清空確認`,requirePlateClear:`需要熱床清空確認`,requirePlateClearDescription:`啟用後，排程器會在已完成列印的印表機上啟動佇列列印之前，等待每臺印表機的熱床清空確認。停用後，也會隱藏印表機卡片上的列印板狀態標記和「將列印板標記為已清理」按鈕。`,keepBedWarm:`在列印之間保持熱床溫度`,keepBedWarmDesc:`在等待列印板清空確認時，將熱床維持在下方設定的保溫溫度，使腔室保持溫熱；若下一個任務的熱床溫度更高，則使用該溫度。僅在下一次列印需要腔室加熱（ASA、ABS、PA、PC 等）時適用。需要啟用列印板清空確認。`,keepWarmBedTemp:`保溫熱床溫度 (°C)`,keepWarmBedTempHelp:`當熱床用於加熱腔室時使用：包括保溫期間，以及列印檔案未包含熱床溫度時的預熱。列印檔案中較高的熱床溫度一律優先。`,keepWarmMaxMinutes:`停止保溫的時間（分鐘）`,keepWarmMaxMinutesHelp:`若在此時間內未清空列印板，加熱器將關閉，而不是無限期保持加熱。`,gcodeInjection:`G-code注入`,gcodeInjectionDescription:`為Farmloop、SwapMod、AutoClear和Printflow 3D等自動列印系統設定自訂G-code，在列印開始和/或結束時注入。程式碼片段按印表機型號設定，在佇列項目上啟用"注入G-code"時套用。`,gcodeInjectionNoPrinters:`未找到印表機。新增印表機以設定G-code程式碼片段。`,gcodeStartLabel:`開始G-code`,gcodeEndLabel:`結束G-code`,gcodeStartPlaceholder:`在列印開始前插入的G-code...`,gcodeEndPlaceholder:`在列印結束後追加的G-code...`,staggerGroupSize:`群組大小`,staggerGroupSizeHelp:`每個群組要同時啟動的印表機數量`,staggerInterval:`間隔（分鐘）`,staggerIntervalHelp:`每個群組啟動之間的延遲`,queueDrying:`自動乾燥`,queueDryingDescription:`在佇列列印之間，印表機空閒時自動乾燥AMS耗材。使用上方的濕度閾值觸發乾燥。`,queueDryingEnabled:`啟用自動乾燥`,queueDryingEnabledDescription:`當印表機空閒且濕度超過閾值時，自動啟動AMS乾燥`,queueDryingBlock:`等待乾燥完成`,queueDryingBlockDescription:`阻止列印佇列直到乾燥完成。關閉時，列印優先於乾燥。`,ambientDryingEnabled:`環境乾燥`,ambientDryingEnabledDescription:`當空閒印表機的濕度超過閾值時自動乾燥耗材，無需佇列列印。`,printDryingEnabled:`列印時繼續乾燥`,printDryingEnabledDescription:`允許自動乾燥在支援的硬體（H2D、H2C、H2S、P2S、H2D Pro、X2D、X1C、A2L 最新韌體）列印過程中繼續執行。為保護料盤，乾燥溫度會自動比閒置時的預設低 5°C。`,dryingPresets:`乾燥預設`,dryingPresetsDescription:`每種耗材類型的溫度和時長。AMS 2 Pro使用較低溫度，AMS-HT支援較高溫度。`,dryingFilament:`耗材`,humidityThresholds:`濕度閾值`,humidityThresholdsDescription:`依耗材類型設定自動乾燥與警報的濕度觸發值。同一 AMS 混載時採用最低閾值。`,humidityThresholdCol:`閾值`,humidityThresholdDefault:`預設（未知類型）`,printModal:`列印對話方塊`,expandCustomMapping:`預設展開自訂對應`,expandCustomMappingDescription:`列印到多臺印表機時，預設展開顯示每臺印表機的 AMS 對應`,authentication:`身份驗證`,authEnabledDescription:`您的實例已透過使用者身份驗證保護`,authDisabledDescription:`啟用以要求登入並管理使用者存取`,authDisabledMessage:`啟用身份驗證以建立使用者帳戶、管理權限並保護您的 Bambuddy 實例。`,enableAuthentication:`啟用身份驗證`,currentUser:`目前使用者`,changePassword:`修改密碼`,admin:`管理員`,users:`使用者`,addUser:`新增使用者`,groups:`群組`,addGroup:`新增群組`,system:`系統`,noDescription:`無描述`,userCount:`{{count}} 個使用者`,permissionCount:`{{count}} 個權限`,createUser:`建立使用者`,username:`使用者名稱`,enterUsername:`輸入使用者名稱`,password:`密碼`,enterPassword:`輸入密碼`,passwordRequirements:`至少 8 個字元，包含一個大寫、一個小寫、一個數字和一個特殊字元。`,confirmPassword:`確認密碼`,confirmPasswordPlaceholder:`確認密碼`,viewReleaseOnGitHub:`在 GitHub 上檢視發布`,turnAllPlugsOn:`開啟所有插座`,turnAllPlugsOff:`關閉所有插座`,clearNotificationLogs:`清除通知日誌`,clearLogsMessage:`這將永久刪除所有 30 天前的通知日誌。此操作無法復原。`,clearLogs:`清除日誌`,resetUiPreferences:`重設 UI 偏好`,resetUiPreferencesMessage:`這將重設所有 UI 偏好為預設值：側邊欄順序、主題、儀表板佈局、檢視模式和排序偏好。您的印表機、歸檔和伺服器設定不會受到影響。清除後頁面將重新載入。`,resetPreferences:`重設偏好`,deleteGroupTitle:`刪除群組`,deleteGroupMessage:`確定要刪除此群組嗎？此群組中的使用者將失去這些權限。`,deleteGroup:`刪除群組`,disableAuthenticationTitle:`停用身份驗證`,disableAuthenticationMessage:`確定要停用身份驗證嗎？這將使您的 Bambuddy 實例無需登入即可存取。所有使用者將保留在資料庫中但身份驗證將被停用。`,disableAuthentication:`停用身份驗證`,configureBambuddy:`設定 Bambuddy`,systemDefault:`系統預設`,archiveSettings:`歸檔設定`,newWindow:`新視窗`,embeddedOverlay:`嵌入式疊加層`,preferredSlicer:`首選切片軟體`,preferredSlicerDescription:`透過 API 邊車進行應用內切片所使用的切片軟體`,openInSlicerLabel:`在切片軟體中開啟`,openInSlicerInherit:`與 API 切片軟體相同`,openInSlicerDescription:`「在切片軟體中開啟」按鈕使用的桌面切片軟體。保持「與 API 切片軟體相同」以繼承設定，或選擇不同的切片軟體以供本地使用。`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev 存在已知 CLI 錯誤，無法切片許多 Bambu 建立的 3MF — 見上游 issue #12426（繪製的多擠出機檔案 segfault）和 #13386（參數範圍嚴格驗證拒絕）。在上游修復發布之前，推薦使用 Bambu Studio。`,useSlicerApi:`使用切片器 API`,useSlicerApiDescription:`開啟時，「切片」操作開啟應用程式內切片器對話框並呼叫 slicer-API sidecar。關閉時（預設），透過 URI 方案交給桌面切片器。`,slicerCard:`切片器`,orcaslicerApiUrl:`OrcaSlicer sidecar URL`,bambuStudioApiUrl:`Bambu Studio sidecar URL`,slicerStallTimeout:`切片器停滯逾時（分鐘）`,slicerStallTimeoutDescription:`若 sidecar 在此時長內沒有任何進度，則放棄本次切片。持續回報進度的複雜模型無論耗時多久都不會被中斷。不回報進度的 sidecar 則將此值作為總時長上限。`,slicerApiUrlDescription:`slicer-API sidecar 容器的 URL。留空以使用 SLICER_API_URL / BAMBU_STUDIO_API_URL 環境變數預設值。`,externalCameras:`外部攝影機`,costTracking:`成本追蹤`,printsOnly:`僅列印`,totalConsumption:`總消耗`,dataManagement:`資料管理`,storageUsage:`儲存使用情況`,storageUsageDescription:`按類別的資料使用情況明細`,storageUsageTotal:`總計`,storageUsageErrors:`錯誤`,storageUsageOtherBreakdown:`其他（包括靜態資源、腳本和設定檔案）`,storageUsageSystem:`系統`,storageUsageData:`資料`,storageUsageUnavailable:`儲存使用資訊不可用`,clearNotificationLogsDescription:`刪除 30 天前的通知日誌`,resetUiPreferencesDescription:`重設側邊欄順序、主題、檢視模式和佈局偏好。印表機、歸檔和設定不受影響。`,enableHomeAssistant:`啟用 Home Assistant`,enableMqtt:`啟用 MQTT`,useTls:`使用 TLS`,enableMetricsEndpoint:`啟用指標端點`,availableMetrics:`可用指標`,billingEnabled:`啟用帳單`,billingEnabledDescription:`向用戶收取列印費用並啟用財務功能`,printerKillSwitch:`列印機緊急停止開關`,printerKillSwitchDescription:`立即停止未經授權的列印`,financeBudgetReset:`財務預算月度重置`,financeBudgetResetDay:`重置日期`,financeBudgetResetDayHelp:`對於少數月份，重置使用該月的最後一天。`,financeBudgetResetTimezone:`重置時區`,financeBudgetResetTimezoneHelp:`預算視窗的開始時間在此時區計算。`,rebuildLedger:`重建錢包帳本`,rebuildLedgerStarted:`錢包帳本重建已啟動`,rebuildLedgerConfirmTitle:`重建錢包帳本?`,rebuildLedgerConfirmMessage:`這將重建錢包帳本以修復歷史餘額值。僅在您知道自己在做什麼時才執行此操作。`,rebuildLedgerInProgress:`正在啟動重建...`,editUser:`編輯使用者`,deleteUserTitle:`刪除使用者`,groupName:`群組名稱`,leaveEmptyForAnonymous:`留空為匿名`,leaveEmptyForNoAuth:`留空為無認證`,enterNewPassword:`輸入新密碼`,confirmNewPassword:`確認新密碼`,enterGroupName:`輸入群組名稱`,enterDescriptionOptional:`輸入描述（可選）`,enterCurrentPassword:`輸入目前密碼`,enterNewPasswordMin6:`輸入新密碼（至少 6 個字元）`,toast:{keyCopied:`金鑰已複製到剪貼簿`,copyFailed:`複製金鑰失敗`,keyAddedToBrowser:`金鑰已新增到 API 瀏覽器`,clearLogsFailed:`清除日誌失敗`,uiPreferencesReset:`UI 偏好已重設。重新整理中...`,authDisabled:`身份驗證已成功停用`,authDisableFailed:`停用身份驗證失敗`,apiKeyCreated:`API 金鑰已建立`,apiKeyDeleted:`API 金鑰已刪除`,userCreated:`使用者建立成功`,userUpdated:`使用者更新成功`,userDeleted:`使用者刪除成功`,groupCreated:`群組建立成功`,groupUpdated:`群組更新成功`,groupDeleted:`群組刪除成功`,fillRequiredFields:`請填寫所有必填欄位`,passwordsDoNotMatch:`密碼不符`,passwordTooShort:`密碼至少需要 8 個字元`,passwordNeedsUppercase:`密碼必須至少包含一個大寫字母`,passwordNeedsLowercase:`密碼必須至少包含一個小寫字母`,passwordNeedsDigit:`密碼必須至少包含一個數字`,passwordNeedsSpecial:`密碼必須至少包含一個特殊字元`,enterGroupName:`請輸入群組名稱`,settingsSaved:`設定已儲存`,noPermissionUpdate:`您沒有權限變更設定`,cameraSettingsSaved:`攝影機設定已儲存`,enterCameraUrl:`請輸入攝影機 URL`,passwordChanged:`密碼修改成功`,connectionFailed:`連線失敗`,testFailed:`測試失敗`,cameraConnected:`攝影機已連線{{resolution}}`,cameraConnectedCoalesced:`攝影機已連線{{resolution}}（與進行中的擷取共用）`},testConnection:`測試連線`,catalog:{spoolCatalog:`耗材目錄`,spoolCatalogDescription:`按品牌/類型的空耗材重量。用於新增耗材時的自動重量查詢。`,searchCatalog:`搜尋目錄...`,addNewEntry:`新增新條目`,namePlaceholder:`名稱（例如：Bambu Lab - 塑膠）`,weight:`重量`,type:`類型`,default:`預設`,custom:`自訂`,noMatch:`沒有條目匹配您的搜尋`,empty:`目錄中沒有條目`,deleteEntry:`刪除條目`,deleteConfirm:`確定要刪除"{{name}}"嗎？`,resetCatalog:`重設目錄`,resetConfirm:`重設目錄為預設值？這將移除所有自訂條目。`,loadFailed:`載入耗材目錄失敗`,nameWeightRequired:`名稱和重量為必填項`,entryAdded:`條目已新增`,addFailed:`新增條目失敗`,entryUpdated:`條目已更新`,updateFailed:`更新條目失敗`,entryDeleted:`條目已刪除`,deleteFailed:`刪除條目失敗`,resetSuccess:`目錄已重設為預設值`,resetFailed:`重設目錄失敗`,exported:`已匯出 {{count}} 條`,imported:`已匯入 {{added}} 條（跳過 {{skipped}} 條）`,importFailed:`匯入失敗：無效的 JSON 格式`,exportTooltip:`匯出目錄為 JSON`,importTooltip:`從 JSON 匯入目錄`,resetTooltip:`重設為預設值`,selectedCount:`已選擇 {{count}} 項`,deleteSelected:`刪除所選`,bulkDeleteConfirm:`確定要刪除 {{count}} 個條目嗎？`,bulkDeleted:`已刪除 {{count}} 個條目`,bulkDeleteFailed:`刪除條目失敗`,material:`材料`,spoolWeight:`線軸重量`,color:`顏色`,updateSpoolWeight:`更新線軸重量`,filamentUpdated:`耗材已更新`,filamentUpdateFailed:`更新耗材失敗`,filamentUpdateInvalid:`耗材資料無效`,keepExistingSpoolWeight:`保留現有線軸的舊重量`,keepExistingSpoolWeightDesc:`已使用此耗材類型建立的線軸保留舊的皮重。新線軸使用更新後的值。`,applyToAllSpools:`套用至所有線軸`,applyToAllSpoolsDesc:`此耗材類型的所有重量計算立即使用新的皮重。`},colorCatalog:{title:`顏色目錄`,description:`按製造商/材料的耗材顏色。用於新增耗材時的自動顏色查詢。`,searchColors:`搜尋顏色...`,allManufacturers:`所有製造商`,addNewColor:`新增新顏色`,manufacturer:`製造商`,colorName:`顏色名稱`,hex:`十六進位`,materialOptional:`材料（可選）`,showing:`顯示 {{filtered}} / {{total}} 種顏色`,noMatch:`沒有顏色匹配您的搜尋`,empty:`目錄中沒有顏色`,deleteColor:`刪除顏色`,deleteConfirm:`確定要刪除"{{name}}"嗎？`,resetCatalog:`重設顏色目錄`,resetConfirm:`重設目錄為預設值？這將移除所有自訂顏色。`,sync:`同步`,starting:`啟動中...`,syncTooltip:`從 FilamentColors.xyz 同步（2000+ 種顏色，可能需要一分鐘）`,loadFailed:`載入顏色目錄失敗`,fieldsRequired:`製造商、顏色名稱和十六進位顏色為必填項`,colorAdded:`顏色已新增`,addFailed:`新增顏色失敗`,colorUpdated:`顏色已更新`,updateFailed:`更新顏色失敗`,colorDeleted:`顏色已刪除`,deleteFailed:`刪除顏色失敗`,resetSuccess:`顏色目錄已重設為預設值`,resetFailed:`重設目錄失敗`,syncUpToDate:`已是最新（檢查了 {{count}} 種顏色）`,syncComplete:`新增了 {{added}} 種新顏色（{{skipped}} 種已存在）`,syncError:`同步錯誤`,syncFailed:`從 FilamentColors.xyz 同步失敗`,exported:`已匯出 {{count}} 種顏色`,imported:`已匯入 {{added}} 種顏色（跳過 {{skipped}} 種）`,importFailed:`匯入失敗：無效的 JSON 格式`,selectedCount:`已選擇 {{count}} 項`,deleteSelected:`刪除所選`,bulkDeleteConfirm:`確定要刪除 {{count}} 種顏色嗎？`,bulkDeleted:`已刪除 {{count}} 種顏色`,bulkDeleteFailed:`刪除顏色失敗`},dateFormat:`日期格式`,dateFormatUs:`美式 (MM/DD/YYYY)`,dateFormatEu:`歐式 (DD/MM/YYYY)`,dateFormatIso:`ISO (YYYY-MM-DD)`,timeFormat:`時間格式`,timeFormat12:`12小時制 (3:30 PM)`,timeFormat24:`24小時制 (15:30)`,defaultPrinter:`預設印表機`,defaultPrinterDescription:`為上傳、重印和其他操作預選此印表機。`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`使用側邊欄版面配置重新排序項目、重設可見性並管理自訂連結。`,setDefault:`設為預設`,sidebarOrderSetDefaultHint:`設為預設將目前選單順序套用於尚未自訂的使用者。`,sidebarDefaultSet:`已設定預設選單順序。`,sidebarDefaultCleared:`已清除預設選單順序。`,sidebarDefaultFailed:`設定預設選單順序失敗。`,reset:`重設`,darkMode:`深色模式`,lightMode:`淺色模式`,active:`(目前)`,background:`背景`,accent:`強調色`,style:`樣式`,bgNeutral:`中性`,bgWarm:`暖色`,bgCool:`冷色`,bgOled:`OLED 純黑`,bgSlate:`石板藍`,bgForest:`森林綠`,accentGreen:`綠色`,accentTeal:`青色`,accentBlue:`藍色`,accentOrange:`橙色`,accentPurple:`紫色`,accentRed:`紅色`,styleClassic:`經典`,styleGlow:`發光`,styleVibrant:`鮮豔`,themeToggleHint:`使用側邊欄中的圖示在深色、淺色和系統模式之間切換。`,progressInTitle:`在分頁顯示列印進度`,progressInTitleDescription:`在瀏覽器分頁中顯示目前列印的百分比和進度環。`,autoArchivePrints:`自動歸檔列印`,autoArchiveDescription:`列印完成時自動儲存3MF檔案`,saveThumbnailsDescription:`從3MF檔案中提取並儲存預覽影像`,captureFinishPhotoDescription:`列印完成時從印表機攝影機拍照。Bambuddy 會在列印期間錄製一段短縮時攝影，以便從熱床下降前的瞬間取得照片；如果您為本次列印啟用了縮時攝影，檔案將保留，否則會在拍照完成後自動刪除。`,finishPhotoRestorePlate:`為完成照片抬升熱床`,finishPhotoRestorePlateDescription:`列印結束時印表機會將熱床下降約 100 mm，使完成的模型落在相機取景範圍之下。Bambuddy 會將熱床抬回到最後一層列印高度略上方，拍攝照片後再次下降。若列印高度未知或佇列中還有其他任務，則跳過此步驟。`,ffmpegNotInstalled:`未安裝ffmpeg`,ffmpegRequired:`攝影機捕獲需要ffmpeg。透過 <brew>brew install ffmpeg</brew>（macOS）或 <apt>apt install ffmpeg</apt>（Linux）安裝。`,camera:`攝影機`,cameraViewMode:`攝影機檢視模式`,cameraOverlayDescription:`攝影機在主螢幕上以可調大小的覆蓋層開啟`,cameraWindowDescription:`攝影機在單獨的瀏覽器視窗中開啟`,externalCamerasDescription:`設定外部攝影機以替換內建印表機攝影機。支援MJPEG流、RTSP、HTTP快照和USB攝影機（V4L2）。啟用後，外部攝影機將用於即時檢視和完成照片。`,cameraPlaceholderUsb:`裝置路徑 (/dev/video0)`,cameraPlaceholderUrl:`攝影機URL (rtsp://... 或 http://...)`,cameraTypeMjpeg:`MJPEG 流`,cameraTypeRtsp:`RTSP 流`,cameraTypeSnapshot:`HTTP 快照`,cameraTypeUsb:`USB 攝影機 (V4L2)`,cameraSnapshotUrl:`快照 URL（選用）`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`用於通知縮圖、完成照片、層縮時攝影影格和列印板偵測的單一影格 URL。縮時攝影和列印板偵測各自需要自己的每印表機切換 — 此 URL 只是它們啟用時拉取的影像來源。留空以從上方即時串流擷取。適用於 go2rtc（/api/frame.jpeg）和具有專用快照端點的 IP 攝影機。`,cameraRotation:`旋轉`,test:`測試`,connected:`已連線`,disconnected:`未連線`,currency:`貨幣`,defaultFilamentCost:`預設耗材成本（每公斤）`,electricityCost:`每千瓦時電費`,energyDisplayMode:`能源顯示模式`,energyModePrintDescription:`儀表板顯示列印期間使用的能源總和`,energyModeTotalDescription:`儀表板顯示智慧插座的累計能源`,fileManager:`檔案管理器`,createArchiveEntry:`列印時建立歸檔條目`,createArchiveEntryDescription:`從檔案管理器列印時，可選擇建立歸檔條目`,lowDiskSpaceWarning:`磁碟空間不足警告`,lowDiskSpaceDescription:`當可用磁碟空間低於此閾值時顯示警告`,printerFirmware:`印表機韌體`,checkFirmwareDescription:`檢查Bambu Lab的印表機韌體更新`,bambuddySoftware:`Bambuddy 軟體`,autoCheckDescription:`啟動時自動檢查新版本`,checkNow:`立即檢查`,updateAvailableVersion:`可用更新：v{{version}}`,releaseNotes:`發布說明`,updateViaDocker:`透過 Docker Compose 更新：`,composeDirectory:`Compose 目錄`,composeDirectoryHint:`存放 docker-compose.yml 的目錄。留空則不加入 cd。`,copyUpdateCommand:`複製更新指令`,updateViaHomeAssistant:`更新由 Home Assistant Supervisor 管理。請在 Home Assistant 中開啟 設定 → 附加元件 → Bambuddy 以安裝新版本。`,updateViaWindowsInstaller:`Windows 安裝可透過重新執行安裝程式來更新。請在下方下載新版本 — 您的資料、設定和印表機都會保留。`,downloadWindowsInstaller:`下載 v{{version}} 安裝程式`,installUpdate:`安裝更新`,latestVersionRunning:`您正在執行最新版本`,failedToCheckUpdates:`檢查更新失敗：{{error}}`,backupRestore:`備份與恢復`,backupRestoreDescription:`匯出/匯入設定並設定GitHub 備份`,goToBackup:`前往備份`,externalUrl:`外部URL`,externalUrlDescription:`Bambuddy可存取的外部URL。用於通知影像和外部整合。`,bambuddyUrl:`Bambuddy URL`,externalUrlHint:`包含協定和連接埠（例如：http://192.168.1.100:8000）`,ftpRetry:`FTP重試`,ftpRetryDescription:`當印表機Wi-Fi 不穩定時重試FTP操作。適用於3MF下載、列印上傳、縮時攝影下載和韌體更新。`,autoRetryDescription:`自動重試失敗的FTP操作`,retryAttempts:`重試次數`,retryDelay:`重試延遲`,connectionTimeout:`連線超時`,time_one:`{{count}} 次`,time_other:`{{count}} 次`,second_one:`{{count}} 秒`,second_other:`{{count}} 秒`,nSeconds:`{{count}} 秒`,increaseForWeakWifi:`對Wi-Fi 訊號弱的印表機增加此值`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`連線到Home Assistant，透過HA REST API控制智慧插座。支援switch、light、input_boolean和script實體。`,homeAssistantUrl:`Home Assistant URL`,longLivedAccessToken:`長期存取權杖`,haTokenHint:`在HA中建立權杖：個人資料 → 長期存取權杖 → 建立權杖`,connectionSuccessful:`連線成功`,connectionFailed:`連線失敗`,haConnectionSuccess:`已成功連線到Home Assistant。`,haConnectionFailed:`連線Home Assistant失敗。`,mqttPublishing:`MQTT發布`,mqttDescription:`將BamBuddy事件發布到外部MQTT代理，用於與Node-RED、Home Assistant和其他自動化系統整合。`,mqttEnableDescription:`向外部MQTT代理發布事件`,brokerHostname:`代理主機名稱`,port:`連接埠`,usernameOptional:`使用者名稱（可選）`,passwordOptional:`密碼（可選）`,topicPrefix:`主題前綴`,topicPrefixHint:`主題格式：{{prefix}}/printers/<serial>/status 等`,prometheusMetrics:`Prometheus 指標`,prometheusEndpointDescription:`在 <code>/api/v1/metrics</code> 公開印表機指標，用於Prometheus/Grafana監控。`,bearerTokenOptional:`Bearer權杖（可選）`,bearerTokenHint:`設定後，請求必須包含 <code>Authorization: Bearer <token></code>`,metricsConnectionStatus:`連線狀態`,metricsPrinterState:`印表機狀態（空閒/列印中等）`,metricsPrintProgress:`列印進度 0-100%`,metricsBedTemp:`熱床溫度`,metricsNozzleTemp:`噴嘴溫度`,metricsPrintsTotal:`按結果分類的總列印數`,metricsMore:`...以及更多（層數、風扇、佇列、耗材用量）`,smartPlugsDescription:`連線智慧插座（Tasmota或Home Assistant）以自動化電源控制並追蹤印表機的能源使用情況。`,allOn:`全部開啟`,allOff:`全部關閉`,addSmartPlug:`新增智慧插座`,energySummary:`能源概要`,currentPower:`目前功率`,plugsOnline:`{{reachable}}/{{total}} 個插座線上`,today:`今天`,yesterday:`昨天`,total:`總計`,enablePlugsForSummary:`啟用插座以檢視能源概要`,addNotificationProvider:`新增`,systemBadge:`(系統)`,creating:`建立中...`,changing:`修改中...`,deleteUserAndItems:`刪除使用者及其所有項目`,deleteUserKeepItems:`刪除使用者，保留項目（將變為無主項目）`,ok:`確定`,twoFa:{totpTitle:`身份驗證器 App (TOTP)`,totpDesc:`使用 Google Authenticator、Aegis 或 Authy 等 App。`,emailOtpTitle:`郵件 OTP`,emailOtpDesc:`登入時向 {{email}} 傳送一次性驗證碼。`,emailOtpNoEmail:`請先為帳戶新增信箱地址以啟用此方式。`,addEmailFirst:`您的帳戶沒有信箱地址，請聯絡管理員新增。`,setupTotp:`設定身份驗證器 App`,setupAuthApp:`設定身份驗證器 App`,setupInstructions:`使用身份驗證器 App 掃描QR Code，然後輸入驗證碼確認。`,manualEntry:`無法掃描？請手動輸入此金鑰：`,scannedContinue:`已掃描 — 繼續`,enterCodeToConfirm:`請輸入身份驗證器 App 中的6位驗證碼以確認設定。`,activate:`啟用`,disableTotp:`停用身份驗證器`,disableConfirmHint:`請輸入有效的 TOTP 碼或備用碼來停用身份驗證器。`,totpDisabled:`身份驗證器 App 已停用。`,emailOtpEnabled:`郵件 OTP 已啟用。`,emailOtpDisabled:`郵件 OTP 已停用。`,smtpRequired:`請先設定並測試SMTP設定。`,invalidCode:`無效驗證碼，請重試。`,enableEmailOtp:`啟用郵件 OTP`,disableEmailOtp:`停用郵件 OTP`,emailSetupEnterCode:`驗證碼已傳送至您的信箱地址。請在下方輸入以確認您擁有此信箱。`,verifyAndEnable:`驗證並啟用`,emailDisablePasswordHint:`請輸入您的帳戶密碼以確認停用郵件 OTP。`,passwordPlaceholder:`輸入您的密碼`,backupCodesTitle:`儲存備用碼`,backupCodesWarning:`請將這些碼儲存在安全的地方。每個碼只能使用一次，且不會再次顯示。`,backupCodesRemaining:`剩餘 {{count}} 個備用碼`,savedCodes:`已儲存`,regenBackup:`重新產生備用碼`,regenBackupHint:`輸入目前 TOTP 碼以產生 10 個新備用碼，所有現有備用碼將失效。`,newBackupCodes:`新備用碼`,linkedAccounts:`已連結的 SSO 帳戶`,linkedAccountsDesc:`以下外部身份提供者已與您的帳戶連結。`,oidcUnlinked:`帳戶已解除連結。`},sessionPolicy:{title:`工作階段政策`,description:`新使用者登入的最長工作階段有效期。已發行的權杖會保留其原有的到期時間。`,preset24h:`24 小時`,preset7d:`7 天`,preset30d:`30 天`,customHoursLabel:`自訂工作階段有效期（小時）`,hoursSuffix:`小時`,warning:`較長的工作階段會削弱自動登出保護。僅建議在受信任的單一使用者部署中使用。`},oidc:{title:`SSO / OIDC 提供者`,desc:`設定 OpenID Connect 提供者以實現單點登入。`,addProvider:`新增提供者`,newProvider:`新提供者`,empty:`尚未設定 OIDC 提供者。`,created:`提供者已建立。`,updated:`提供者已更新。`,deleted:`提供者已刪除。`,refreshIcon:`重新整理圖示`,removeIcon:`移除圖示`,iconRefreshed:`圖示已重新整理。`,iconRemoved:`圖示已移除。`,iconFetchFailed:`無法從提供者 URL 取得圖示。`,deleteTitle:`刪除提供者`,deleteMessage:`刪除"{{name}}"？所有連結帳戶將斷開連線。`,form:{name:`顯示名稱`,issuerUrl:`頒發者 URL`,clientId:`客戶端 ID`,clientSecret:`客戶端金鑰`,scopes:`作用域`,iconUrl:`圖示 URL（可選）`,enabled:`已啟用`,autoCreate:`自動建立使用者`,autoCreateDesc:`首次登入時自動建立本機帳戶。`,autoLink:`自動連結已有帳戶`,autoLinkDesc:`首次登入時透過信箱匹配現有本機帳戶並自動連結。`,emailClaim:`電子郵件聲明`,emailClaimDesc:`用作電子郵件身份的 JWT 聲明。Azure Entra ID 請使用 'preferred_username' 或 'upn'（不發送 email_verified）。僅使用可信的聲明名稱。`,emailClaimPlaceholder:`電子郵件`,emailClaimCustomClaimAutoLinkWarning:`自訂宣告僅在值由租用戶管理時（例如 Azure Entra ID 的 upn / preferred_username）對自動關聯安全。如果您的 IdP 允許使用者自我宣告此宣告，請勿啟用自動關聯。`,requireEmailVerified:`要求電子郵件已驗證`,requireEmailVerifiedDesc:`僅在提供商將電子郵件聲明標記為已驗證時才接受。`,requireEmailVerifiedWarning:`警告：將在未經驗證的情況下接受電子郵件。僅對受信任的提供商使用。`,requireEmailVerifiedAutoLink:`請先停用自動連結以變更此設定。`,secretHint:`留空以保留目前`,secretPlaceholder:`新金鑰`,defaultGroup:`預設群組`,defaultGroupDesc:`自動建立使用者時分配的群組。未設定時回退到 Viewers。`,defaultGroupViewersFallback:`Viewers（預設）`,autologin:`自動登入`,autologinDesc:`將未驗證的訪客直接重新導向至此提供者。此旗標僅能由一個提供者持有。`}},encryption:{title:`MFA 加密狀態`,enabledFromEnv:`已啟用靜態加密（金鑰來自 MFA_ENCRYPTION_KEY 環境變數）`,enabledFromFile:`已啟用靜態加密（金鑰從資料目錄載入）`,enabledGenerated:`使用自動產生的金鑰啟用靜態加密`,notConfigured:`未設定靜態加密`,notConfiguredDesc:`TOTP 機密和 OIDC client_secrets 以明文儲存。請設定 MFA_ENCRYPTION_KEY 或使用可寫資料目錄重新啟動 Bambuddy 以自動產生。`,allEncrypted:`所有 MFA 機密皆已靜態加密。`,legacyRowsLabel:`舊版明文列`,encryptedRowsLabel:`已加密列`,legacyRowsWarning:`偵測到 {{count}} 個舊版明文列。請重新儲存 OIDC 供應商或重新註冊使用者的身份驗證器應用程式，以遷移到加密儲存。`,backupHint:`自動產生的金鑰儲存在 DATA_DIR/.mfa_encryption_key 中，並包含在本機備份 ZIP 中。請保護備份安全或顯式設定 MFA_ENCRYPTION_KEY。`,decryptionBrokenTitle:`加密金鑰遺失`,decryptionBrokenError:`無法解密 {{count}} 條加密記錄，因為加密金鑰不再可用。請還原先前的 MFA_ENCRYPTION_KEY 或 DATA_DIR/.mfa_encryption_key 以恢復存取。`,migrationErrorWarning:`{{count}} 行舊資料在啟動時未能重新加密。請檢查伺服器日誌並重新啟動 Bambuddy 以重試。`},pipelineLimits:{title:`切片機管線限制`,maxCopiesLabel:`每次執行最大副本數`,maxCopiesDesc:`操作員執行管線時可請求的副本數上限。伺服器端硬性上限為 1000。`},pipelines:{title:`切片機管線`,subtitle:`可重複使用的預設組合（印表機 + 製程 + 耗材 + 熱床類型）。在切片對話框中儲存一個，下次切片檔案時一鍵套用。`,loading:`正在載入管線…`,loadError:`無法載入管線。`,confirmDelete:`刪除此管線？此操作無法復原。`,staleWarning:`參考的一個或多個預設已不存在。請在切片對話框中重新儲存此管線以修正。`,empty:{title:`尚無管線。`,howto:`為任意檔案開啟切片對話框，選擇印表機 / 製程 / 耗材 / 熱床,然後點擊「另存為管線」。儲存的管線將顯示於此處。`},field:{name:`管線名稱`,description:`描述`,targetPrinter:`目標印表機`,noTarget:`— 無目標 —`,targetKind:`目標類型`,targetKindSpecific:`特定印表機`,targetKindClass:`印表機類別`,targetModelClass:`印表機型號`,fanoutStrategy:`分發策略`,fanout:{max_parallel:`最大並行 — 分發到任何空閒匹配的印表機`,round_robin:`輪替 — 在合格印表機間循環`,fill_one_first:`先填一台 — 將所有副本固定到一台印表機`},fanoutShort:{max_parallel:`並行`,round_robin:`輪替`,fill_one_first:`先填一台`}},action:{save:`儲存`,cancel:`取消`,rename:`重新命名`,delete:`刪除`},slot:{printer:`印表機`,process:`製程`,filament:`耗材`,filamentN:`耗材 {{n}}`,filamentAll:`全部 {{n}} 個槽`,bed:`熱床`},group:{profiles:`設定檔`,filaments:`耗材`},searchPlaceholder:`搜尋管線…`,filterTargetType:`依目標類型篩選`,filterTarget:`依目標篩選`,filter:{all:`全部目標`,noTarget:`未設定目標`,count:`{{shown}} / {{total}}`,noMatches:`沒有管線符合目前的篩選條件。`},toast:{saved:`管線已儲存`,saveFailed:`儲存失敗`,deleted:`管線已刪除`,deleteFailed:`刪除失敗`},noTargetHint:`設定目標印表機以執行`,noTargetWarning:`執行此管線前請先設定目標印表機。`,runs:{lastRun:`上次執行`,status:{queued:`排隊中`,slicing:`切片中`,dispatching:`傳送中`,in_progress:`列印中`,completed:`已完成`,failed:`失敗`,partial_failure:`部分失敗`,cancelled:`已取消`}}}},notification:{printStarted:{title:`列印已開始`,body:`{{printer}}：{{filename}} 已開始列印`},printCompleted:{title:`列印已完成`,body:`{{printer}}：{{filename}} 已成功完成`},printFailed:{title:`列印失敗`,body:`{{printer}}：{{filename}} 列印失敗`},printStopped:{title:`列印已停止`,body:`{{printer}}：{{filename}} 已停止`},printProgress:{title:`列印進度`,body:`{{printer}}：{{filename}} 已完成 {{percent}}%`},printerOffline:{title:`印表機離線`,body:`{{printer}} 已離線`},printerError:{title:`印表機錯誤`,body:`{{printer}}：{{error}}`},filamentLow:{title:`耗材不足`,body:`{{printer}}：耗材即將用完`},maintenanceDue:{title:`維護到期`,body:`{{printer}}：{{items}} 需要關注`}},errors:{generic:`出了點問題`,networkError:`網路錯誤。請檢查您的連線。`,notFound:`未找到`,unauthorized:`未授權`,serverError:`伺服器錯誤`,validationError:`請檢查您的輸入`,printerConnectionFailed:`連線印表機失敗`,saveFailed:`儲存更改失敗`,deleteFailed:`刪除失敗`,loadFailed:`載入資料失敗`},hmsErrors:{title:`錯誤 - {{name}}`,noErrors:`無錯誤`,viewOnWiki:`在拓竹 Wiki 上檢視`,mqttVerifyFailedRemedy:`在印表機上啟用開發者模式，重新啟動印表機，然後重新開始該工作。`,unknownCode:`未知 HMS 代碼 — 詳情請參閱拓竹 Wiki。`,clearInstructions:`在印表機上清除錯誤以在此處消除它們。`,clearErrors:`清除錯誤`,clearSuccess:`HMS 錯誤已清除`,clearFailed:`清除 HMS 錯誤失敗`,actionSuccess:`已向印表機傳送動作`,actionFailed:`動作傳送失敗`,runoutExpectedSlot:`{{ranOut}} 的耗材已用盡。印表機現在正在等待 {{expected}} 裝入相容耗材。請將料卷裝入 {{expected}}，然後選擇「重試」。`,runoutExpectedSlotOnly:`印表機正在等待 {{expected}} 裝入相容耗材。請在該料槽裝入料卷，然後選擇「重試」。`,runoutSlotUnknown:`耗材已用盡，列印已暫停。Bambuddy 無法確定印表機現在需要哪個料槽——請在印表機螢幕上查看所請求的料槽。`,actions:{RESUME_PRINTING:`恢復列印`,RESUME_PRINTING_DEFECTS:`恢復 (瑕疵可接受)`,RESUME_PRINTING_PROBELM_SOLVED:`恢復 (問題已解決)`,STOP_PRINTING:`停止列印`,CHECK_ASSISTANT:`檢視助理`,FILAMENT_EXTRUDED:`已擠出耗材，繼續`,RETRY_FILAMENT_EXTRUDED:`尚未擠出，重試`,CONTINUE:`已完成，繼續`,LOAD_VIRTUAL_TRAY:`載入耗材`,OK_BUTTON:`確定`,FILAMENT_LOAD_RESUME:`耗材已載入，恢復`,JUMP_TO_LIVEVIEW:`檢視即時畫面`,NO_REMINDER_NEXT_TIME:`下次不再提醒`,REFRESH_NOZZLE:`重新檢查`,IGNORE_NO_REMINDER_NEXT_TIME:`忽略，下次不再提醒`,IGNORE_RESUME:`忽略並恢復`,PROBLEM_SOLVED_RESUME:`問題已解決，恢復`,TURN_OFF_FIRE_ALARM:`知道了，關閉火警`,RETRY_PROBLEM_SOLVED:`重試 (問題已解決)`,CANCLE:`取消`,STOP_DRYING:`停止乾燥`,PROCEED:`繼續`,OK_JUMP_RACK:`確定`,ABORT:`中止`,DISABLE_PURIFICATION:`本次列印停用空氣淨化`,DONT_REMIND_NEXT_TIME:`不再提醒`,DBL_CHECK_CANCEL:`取消`,DBL_CHECK_DONE:`完成`,DBL_CHECK_RETRY:`重試`,DBL_CHECK_RESUME:`恢復`,DBL_CHECK_OK:`確認`,REMOVE_CLOSE_BTN:`關閉`}},mqttDebug:{title:`MQTT 偵錯日誌`,searchPlaceholder:`搜尋主題或負載...`,noMessages:`尚未紀錄訊息`,startLoggingHint:`點選"開始紀錄"以開始捕獲 MQTT 訊息`,noMessagesMatch:`沒有訊息匹配您的篩選條件`,adjustFilterHint:`嘗試調整您的搜尋或篩選條件`,incoming:`傳入`,outgoing:`傳出`,loggingStopped:`紀錄已停止`,loggingActive:`紀錄中 - 訊息將自動重新整理`,startLogging:`開始紀錄`,stopLogging:`停止紀錄`,clearLog:`清除日誌`,topic:`主題`,timestamp:`時間戳`,direction:`方向`,all:`全部`},printerFiles:{zipStarted_one:`已開始下載 {{count}} 個檔案的 ZIP`,zipStarted_other:`已開始下載 {{count}} 個檔案的 ZIP`,zipPartial:`已開始下載 ZIP，共 {{total}} 個檔案中成功取得 {{successful}} 個，其餘檔案無法取得`,downloadFailed:`下載失敗：{{error}}`,unknownError:`未知錯誤`,shiftSelectHint:`按住 Shift 點擊以選取範圍`,selectFile:`選取 {{name}}`,deselectFile:`取消選取 {{name}}`,title:`檔案管理器`,storageUsed:`已用：`,storageFree:`剩餘：`,filterPlaceholder:`篩選檔案...`,deleteButton:`刪除`,deleteFiles:`刪除 {{count}} 個檔案`,deleteFileConfirm:`刪除"{{name}}"？此操作無法復原。`,deleteFilesConfirm:`刪除 {{count}} 個選中的檔案？此操作無法復原。`,noFiles:`印表機上沒有檔案`,printerUnavailable:`印表機檔案服務無法使用。請在可連線至印表機時重試。`,loadingFiles:`載入檔案中...`,failedToLoad:`載入檔案失敗`,toast:{filesDeleted:`已刪除 {{count}} 個檔案`,deleteFailed:`刪除失敗：{{error}}`}},confirm:{delete:`確定要刪除嗎？`,unsavedChanges:`您有未儲存的更改。確定要離開嗎？`,clearQueue:`確定要清空佇列嗎？`},login:{title:`Bambuddy 登入`,subtitle:`登入您的帳戶`,username:`使用者名稱`,usernamePlaceholder:`輸入您的使用者名稱`,usernameOrEmail:`使用者名稱或信箱`,usernameOrEmailPlaceholder:`使用者名稱或 @ 信箱`,password:`密碼`,passwordPlaceholder:`輸入您的密碼`,signIn:`登入`,signingIn:`登入中...`,rememberMe:`記住我`,forgotPassword:`忘記密碼？`,autologinFailed:`自動SSO登入失敗。請在下方選擇一個提供者以繼續。`,localDisabledNotice:`本機登入已停用。請使用下方的SSO提供者之一。`,loginSuccess:`登入成功`,loginFailed:`登入失敗`,enterCredentials:`請輸入使用者名稱和密碼`,enterEmail:`請輸入您的電子郵件地址`,oidcLoginFailed:`OIDC 登入失敗`,oidcErrors:{providerError:`身份提供者返回了一個錯誤`,missingParameters:`OIDC 回呼缺少必要引數`,invalidState:`OIDC 狀態無效或已被使用`,stateExpired:`OIDC 登入會話已過期，請重試`,providerNotFound:`未找到 OIDC 提供者`,discoveryFailed:`無法獲取 OIDC 探索文件`,invalidDiscovery:`OIDC 探索文件無效`,networkError:`OIDC 權杖交換時出現網路錯誤`,badResponse:`OIDC 權杖交換時收到意外回應`,noIdToken:`OIDC 提供者未返回 ID 權杖`,validationFailed:`OIDC 權杖驗證失敗`,nonceMismatch:`OIDC nonce 不符，可能存在重放攻擊`,missingSubClaim:`OIDC 權杖缺少 sub 宣告`,noLinkedAccount:`沒有與此 OIDC 身份連結的本機帳戶`,accountInactive:`您的帳戶已被停用`,userResolutionFailed:`無法解析您的帳戶`,internalError:`OIDC 登入過程中發生內部錯誤`,tokenExchangeFailed:`OIDC 權杖交換失敗`},forgotPasswordTitle:`忘記密碼`,forgotPasswordMessage:`如果您忘記了密碼，請聯絡系統管理員進行重設。`,forgotPasswordEmailMessage:`輸入您的信箱地址，我們將向您傳送新密碼。`,emailAddress:`信箱地址`,emailPlaceholder:`your.email@example.com`,cancel:`取消`,sending:`傳送中...`,sendResetEmail:`傳送重設郵件`,howToReset:`如何重設密碼：`,resetStep1:`聯絡您的 Bambuddy 管理員`,resetStep2:`請他們在使用者管理中重設您的密碼`,resetStep3:`他們可以為您設定一個臨時密碼`,resetStep4:`使用新密碼登入並在設定中修改密碼`,gotIt:`知道了`,resetPassword:{title:`設定新密碼`,subtitle:`請在下方輸入並確認您的新密碼。`,newPassword:`新密碼`,newPasswordPlaceholder:`至少 8 個字元`,confirmPassword:`確認密碼`,confirmPasswordPlaceholder:`重複輸入新密碼`,saving:`儲存中…`,submit:`設定新密碼`,backToLogin:`回到登入`,passwordsDoNotMatch:`密碼不符`,passwordTooShort:`密碼至少需要 8 個字元`,resetFailed:`密碼重設失敗。連結可能已過期。`},twoFA:{title:`兩步驗證`,subtitle:`您的帳戶已啟用兩步驗證。請在下方輸入驗證碼。`,methodAuthenticator:`身份驗證器 App`,methodEmail:`信箱驗證碼`,methodBackup:`備用恢復碼`,instructionsTotp:`請開啟您的身份驗證器 App，輸入 Bambuddy 的 6 位驗證碼。`,instructionsEmail:`6 位驗證碼已傳送至您的信箱，有效期為 10 分鐘。`,instructionsEmailNotSent:`點選下方按鈕，透過郵件獲取驗證碼。`,instructionsBackup:`請輸入您的一個 8 位備用恢復碼。每個恢復碼只能使用一次。`,sendCodeButton:`傳送信箱驗證碼`,sendingCode:`傳送中...`,resendCode:`重新傳送驗證碼`,codeLabel:`驗證碼`,backupCodeLabel:`備用恢復碼`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`驗證`,verifyingButton:`驗證中...`,backToLogin:`← 回到登入頁面`,orContinueWith:`或透過以下方式登入`,signInWith:`使用 {{provider}} 登入`,enterCode:`請輸入驗證碼`,sendCodeFailed:`驗證碼傳送失敗`,invalidCode:`無效驗證碼，請重試。`}},setup:{title:`Bambuddy 設定`,subtitle:`為您的 Bambuddy 實例設定身份驗證`,enableAuth:`啟用身份驗證`,adminAccount:`管理員帳戶`,adminAccountDesc:`如果管理員使用者已存在，將使用現有管理員帳戶啟用身份驗證。如需使用現有管理員，請將下方欄位留空，或輸入新憑據建立新管理員使用者。`,adminUsername:`管理員使用者名稱`,adminPassword:`管理員密碼`,optionalIfAdminExists:`（如管理員使用者已存在則為可選）`,adminUsernamePlaceholder:`輸入管理員使用者名稱（可選）`,adminPasswordPlaceholder:`輸入管理員密碼（可選）`,confirmPassword:`確認密碼`,confirmPasswordPlaceholder:`確認管理員密碼`,settingUp:`設定中...`,completeSetup:`完成設定`,toast:{authEnabledAdminCreated:`身份驗證已啟用並建立了管理員使用者`,authEnabledExistingAdmins:`使用現有管理員使用者啟用了身份驗證`,setupCompleted:`設定完成`,enterBothCredentials:`請輸入管理員使用者名稱和密碼，或將兩者留空以使用現有管理員使用者`,passwordsDoNotMatch:`密碼不符`,passwordTooShort:`密碼至少需要 6 個字元`}},changePassword:{title:`修改密碼`,currentPassword:`目前密碼`,currentPasswordPlaceholder:`輸入目前密碼`,newPassword:`新密碼`,newPasswordPlaceholder:`輸入新密碼（至少 6 個字元）`,confirmPassword:`確認新密碼`,confirmPasswordPlaceholder:`確認新密碼`,passwordsDoNotMatch:`密碼不符`,passwordTooShort:`密碼至少需要 6 個字元`,changing:`修改中...`,success:`密碼修改成功`,failed:`密碼修改失敗`},plateAlert:{title:`列印已暫停！`,message:`在列印板上偵測到物體。列印已自動暫停。請清理列印板並繼續列印。`,understand:`我知道了`},camera:{title:`攝影機檢視`,invalidPrinterId:`無效的印表機 ID`,live:`即時`,snapshot:`快照`,restartStream:`重新啟動流`,refreshSnapshot:`重新整理快照`,fullscreen:`全螢幕`,exitFullscreen:`離開全螢幕`,connectingToCamera:`連線攝影機中...`,capturingSnapshot:`拍攝快照中...`,connectionLost:`連線已斷開`,connectionFailed:`攝影機連線失敗`,reconnecting:`{{countdown}} 秒後重新連線...（第 {{attempt}}/{{max}} 次嘗試）`,reconnectNow:`立即重新連線`,cameraUnavailable:`攝影機不可用`,cameraUnavailableDesc:`請確保印表機已通電並已連線。`,noCamera:`無可用攝影機`,retry:`重試`,cameraStream:`攝影機流`,zoomOut:`縮小`,zoomIn:`放大`,resetZoom:`重設縮放`,recording:`錄製中`,startRecording:`開始錄製`,stopRecording:`停止錄製`,chamberLight:`切換腔室燈`,unavailable:`攝影機無法使用`,diagnose:{button:`診斷`,modalTitle:`攝影機診斷`,running:`正在執行診斷...`,runFailed:`無法執行診斷: {{error}}`,retry:`重新執行`,stage:{tcp_reachable:`網路可達性`,first_frame:`畫面擷取`,live_stream_active:`直播串流進行中`},summary:{all_ok:`攝影機運作正常。診斷已成功完成所有階段。`,live_stream_active_healthy:`攝影機正在傳輸最新畫面 — 無需測試。`,printer_unreachable:`無法存取印表機。請檢查 IP 位址、網路連線以及印表機是否已開機。`,camera_port_closed:`印表機可存取，但攝影機連接埠已關閉。請確認印表機設定中已啟用僅 LAN 模式與開發者模式。`,no_frame:`已連線到攝影機，但未收到畫面。請重試或檢查印表機設定中攝影機是否已啟用。`,unknown_failure:`攝影機診斷因不明原因失敗。請查看支援日誌了解詳情。`},meta:{protocol:`協定`,port:`連接埠`,profile:`設定檔`}}},groups:{title:`群組管理`,subtitle:`管理存取控制的權限群組`,backToSettings:`返回設定`,createGroup:`建立群組`,noPermission:`您沒有存取此頁面的權限。`,system:`系統`,noDescription:`無描述`,usersCount:`{{count}} 個使用者`,permissionsCount:`{{count}} 個權限`,edit:`編輯`,delete:`刪除`,toast:{created:`群組建立成功`,updated:`群組更新成功`,deleted:`群組刪除成功`,enterGroupName:`請輸入群組名稱`},modal:{editGroup:`編輯群組`,createGroup:`建立群組`,cancel:`取消`,saving:`儲存中...`,creating:`建立中...`,saveChanges:`儲存更改`},form:{groupName:`群組名稱`,groupNamePlaceholder:`輸入群組名稱`,systemGroupWarning:`系統群組名稱不可更改`,description:`描述`,descriptionPlaceholder:`輸入描述（可選）`,permissions:`權限（已選 {{count}} 個）`},deleteModal:{title:`刪除群組`,message:`確定要刪除此群組嗎？此群組中的使用者將失去這些權限。`,confirm:`刪除群組`},editor:{title:`編輯群組`,createTitle:`建立群組`,search:`搜尋權限...`,selectAll:`全選`,clearAll:`清除全部`,permissionsSelected:`已選 {{count}} 個`,noResults:`沒有權限匹配您的搜尋`,websocketHint:`即時更新所需。缺少此權限時，介面將回退到定期輪詢。`}},users:{title:`使用者管理`,subtitle:`管理使用者及其對 Bambuddy 實例的存取`,backToSettings:`返回設定`,createUser:`建立使用者`,noPermission:`您沒有存取此頁面的權限。`,admin:`管理員`,noGroups:`無群組`,active:`活躍`,inactive:`非活躍`,edit:`編輯`,delete:`刪除`,system:`系統`,noGroupsAvailable:`無可用群組`,table:{username:`使用者名稱`,groups:`群組`,status:`狀態`,actions:`操作`},toast:{created:`使用者建立成功`,updated:`使用者更新成功`,deleted:`使用者刪除成功`,fillRequired:`請填寫所有必填欄位`,passwordsDoNotMatch:`密碼不符`,passwordTooShort:`密碼至少需要 6 個字元`,ldapProvisioned:`已建立 LDAP 使用者「{{username}}」`},modal:{createUser:`建立使用者`,editUser:`編輯使用者`,cancel:`取消`,creating:`建立中...`,saving:`儲存中...`,saveChanges:`儲存更改`,advancedAuthSubtitle:`使用進階認證`,tabsAriaLabel:`使用者來源`,localTab:`本機`,ldapTab:`LDAP`,ldapSearchLabel:`搜尋目錄`,ldapSearchPlaceholder:`輸入使用者名稱、姓名或電子郵件...`,ldapMinChars:`輸入至少 2 個字元以搜尋`,ldapTypeToSearch:`開始輸入以搜尋 LDAP 目錄`,ldapSearching:`搜尋目錄中...`,ldapNoResults:`目錄中沒有符合的使用者`,ldapSearchError:`目錄搜尋失敗。請檢查 LDAP 伺服器狀態。`,ldapAlreadyProvisioned:`已建立`,ldapSelectedLabel:`已選`,ldapProvision:`建立使用者`,ldapProvisioning:`建立中...`,ldapErrorProvision:`建立失敗。請檢查 LDAP 伺服器狀態後重試。`},form:{username:`使用者名稱`,usernamePlaceholder:`輸入使用者名稱`,email:`信箱`,emailPlaceholder:`user@example.com`,password:`密碼`,passwordPlaceholder:`輸入密碼`,confirmPassword:`確認密碼`,confirmPasswordPlaceholder:`確認密碼`,newPasswordPlaceholder:`輸入新密碼`,confirmNewPasswordPlaceholder:`確認新密碼`,leaveBlankToKeep:`留空以保持目前值`,groups:`群組`,optional:`可選`,autoGeneratedPassword:`將自動產生安全密碼並透過郵件傳送給使用者。`,passwordManagedByAdvancedAuth:`密碼由進階認證管理。使用"重設密碼"透過郵件向使用者傳送新密碼。`,resetPassword:`重設密碼`,resettingPassword:`重設密碼中...`},deleteModal:{title:`刪除使用者`,message:`確定要刪除此使用者嗎？此操作無法復原。`,confirm:`刪除使用者`}},streamOverlay:{title:`流疊加層`,invalidPrinterId:`無效的印表機 ID`,cameraStream:`攝影機流`,progress:`進度`,eta:`預計完成時間`,printerIdle:`印表機空閒`,printerOffline:`印表機離線`,builder:{title:`直播疊加層`,description:`產生直播疊加層的網址：全螢幕攝影機畫面上疊加即時列印資訊，可用於 OBS、牆面顯示器或任何瀏覽器來源。選擇需要的欄位並複製網址。`,printer:`印表機`,size:`文字大小`,sizeSmall:`小`,sizeMedium:`中`,sizeLarge:`大`,fps:`影格率`,fpsHint:`無論設定多少，A1 與 P1 的攝影機最高約為每秒 5 影格。`,token:`直播疊加層權杖（選填）`,tokenHint:`僅在啟用登入時需要：OBS 沒有自己的登入工作階段。請在上方以直播疊加層範圍建立一個。`,tokenWarning:`此網址包含權杖：任何能看到它的人都可以觀看畫面並看到檔案名稱。撤銷權杖即可中止存取。`,fields:`要顯示的欄位`,fieldPrinter:`印表機名稱`,fieldFilename:`檔案名稱`,fieldStatus:`狀態`,fieldProgress:`進度列`,fieldLayers:`層數`,fieldEta:`剩餘時間與預計完成時間`,fieldCamera:`攝影機畫面`,chamberHint:`僅在具備真實機箱感測器的機型上顯示機箱溫度：P1 與 A1 回報的數值沒有意義，因此不顯示。`,urlTitle:`疊加層網址`,open:`開啟`,showPreview:`顯示預覽`,hidePreview:`隱藏預覽`,previewTitle:`疊加層預覽`},status:{printing:`列印中`,paused:`已暫停`,finished:`已完成`,failed:`失敗`,idle:`空閒`,unknown:`未知`}},profiles:{title:`設定檔案`,subtitle:`管理您的切片預設和壓力推進校準`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`本機設定檔案`,kprofiles:`K 值設定`},orcaCloud:{connectedAs:`已連接`,connectedShort:`已連接到 Orca Cloud`,logout:`中斷連線`,noLogoutPermission:`您沒有中斷連線的權限`,noConnectPermission:`您沒有連接到 Orca Cloud 的權限`,retry:`重試`,connectButton:`連接 Orca Cloud`,connect:{title:`連接到 Orca Cloud`,description:`登入您的 Orca Cloud 帳號,將切片機設定檔同步到 Bambuddy。`},device:{title:`在 Orca Cloud 中核准 Bambuddy`,instruction:`開啟 Orca Cloud 並核准此代碼。核准後 Bambuddy 會自動連接。`,codeLabel:`您的配對代碼`,openButton:`開啟 Orca Cloud 核准頁面`,manualHint:`或前往 {{url}} 並輸入上方的代碼。`,waiting:`正在等待您核准…`,cancel:`取消`},profiles:{title:`您的 Orca Cloud 設定檔 ({{count}})`,refresh:`重新整理`,empty:`您的 Orca Cloud 帳號中尚無設定檔。`},toast:{disconnected:`已從 Orca Cloud 中斷連線`},errors:{startFailed:`無法啟動 Orca Cloud 登入流程。`,denied:`配對在 Orca Cloud 中被拒絕。`,expired:`配對代碼已過期。請點擊「連接」重試。`,pollFailed:`等待核准時連線中斷。請重試。`}},localProfiles:{title:`本機設定檔案`,subtitle:`從 OrcaSlicer 匯入和管理切片預設`,import:`匯入設定檔案`,importDesc:`將 .bbscfg、.bbsflmt、.orca_filament、.zip 或 .json 檔案拖放到此處`,importing:`匯入中...`,search:`搜尋本機預設...`,noPresets:`尚無本機預設`,noSearchResults:`沒有符合搜尋的預設`,badge:`本機`,edit:`編輯`,delete:`刪除`,cancel:`取消`,deleteConfirmTitle:`刪除預設`,deleteConfirm:`確定要刪除此預設嗎？此操作無法復原。`,source:`來源`,inheritsFrom:`繼承自`,filamentType:`類型`,vendor:`廠商`,compatiblePrinters:`相容印表機`,nozzleTemp:`噴嘴溫度`,cost:`成本`,density:`密度`,pressureAdvance:`壓力推進`,filament:`耗材`,process:`工藝`,printer:`印表機`,toast:{importSuccess:`已匯入 {{count}} 個預設`,importSkipped:`跳過 {{count}} 個預設（重複）`,importError:`匯入時出現 {{count}} 個錯誤`,deleted:`預設已刪除`,updated:`預設已更新`}},connectedAs:`已連線為`,signInExpiredTitle:`Bambu Cloud 登入已過期`,signInExpiredBody:`Bambu Lab 不再接受已儲存的權杖。請重新登入以恢復雲端設定檔、MakerWorld 匯入與韌體檢查。`,logout:`登出`,noLogoutPermission:`您沒有登出的權限`,failedToLoad:`載入設定檔案失敗`,retry:`重試`,time:{justNow:`剛剛`,minsAgo:`{{count}} 分鐘前`,hoursAgo:`{{count}} 小時前`,daysAgo:`{{count}} 天前`},toast:{loggedOut:`已登出`},login:{title:`連線到拓竹雲`,subtitle:`跨裝置同步您的切片預設`,email:`信箱`,password:`密碼`,region:`地區`,regionGlobal:`全球`,regionChina:`中國`,verificationCode:`驗證碼`,totpCode:`驗證器驗證碼`,checkEmail:`檢查您的信箱 ({{email}}) 獲取 6 位驗證碼`,enterTotpHint:`輸入驗證器 App 中的 6 位驗證碼`,accessToken:`存取權杖`,accessTokenHint:`貼上您的拓竹雲端存取權杖。中國大陸帳號（綁定手機號碼、無 Email 登入）僅能使用此方式登入。可從 MakerWorld 瀏覽器 Cookie 取得權杖，詳見 Wiki。`,back:`返回`,loginButton:`登入`,verifyButton:`驗證`,setTokenButton:`設定權杖`,useToken:`改用存取權杖`,captchaTitle:`Bambu Cloud 要求進行 CAPTCHA 驗證`,captchaBody:`Bambu 在接受登入之前要求你的網路通過 CAPTCHA 驗證，而該驗證無法在 Bambuddy 中完成。這與你的電子郵件和密碼無關。限制與你的公開 IP 位址綁定，通常幾小時後會自動解除；反覆重試只會延長限制。若要立即登入，請改用從瀏覽器工作階段取得的存取權杖。`,useEmail:`改用信箱登入`,toast:{loggedIn:`登入成功`,codeSent:`驗證碼已傳送到您的信箱`,enterTotp:`輸入驗證器 App 中的程式碼`,tokenSet:`權杖設定成功`}},presets:{myPreset:`我的預設（可編輯）`,duplicate:`複製`,editable:`可編輯`,failedToLoadDetails:`載入預設詳情失敗`,deleteConfirm:`刪除此預設？`,deleteWarning:`這將從拓竹雲中永久刪除"{{name}}"。此操作無法復原。`,noDuplicatePermission:`您沒有複製預設的權限`,noEditPermission:`您沒有編輯預設的權限`,noDeletePermission:`您沒有刪除預設的權限`,types:{filament:`耗材預設`,printer:`印表機預設`,process:`工藝預設`},toast:{deleted:`預設已刪除`,created:`預設已建立`,updated:`預設已更新`,duplicated:`預設已複製`,fieldAdded:`欄位"{{key}}"已新增`,exported:`預設已匯出`},baseLabel:`基礎：{{name}}`,currentLabel:`目前：{{name}}`,newPreset:`新增預設`,editPreset:`編輯預設`,duplicatePreset:`複製預設`,createNewPreset:`建立新預設`,customizeSettings:`自訂新預設的設定`,compareWithBase:`與基礎預設比較`,compare:`比較`,basePreset:`基礎預設`,selectBasePreset:`選擇基礎預設...`,presetName:`預設名稱`,myCustomPreset:`我的自訂預設`,inheritsFrom:`繼承自`,dropJsonToImport:`拖放 JSON 以匯入`,tabs:{common:`常用`,allFields:`所有欄位`},availableFields:`可用欄位`,searchFieldsPlaceholder:`搜尋欄位...`,noMatchingFields:`沒有匹配的欄位`,allFieldsAdded:`所有欄位已新增`,addCustomField:`新增自訂欄位`,yourOverrides:`您的覆蓋值`,noOverridesYet:`尚無覆蓋值`,clickFieldsToAdd:`點選左側的欄位進行新增`,saveAsTemplate:`儲存為範本`,jsonTip:`提示：將 .json 檔案拖放到此對話方塊的任意位置以匯入設定`},cloudView:{searchPlaceholder:`搜尋預設...`,templates:`範本`,refresh:`重新整理`,newPreset:`新增預設`,clearFilters:`清除篩選`,compareMode:`比較模式`,selectAnotherPreset:`選擇另一個 {{type}} 預設`,clickTwoPresets:`點選兩個相同類型的預設進行比較`,selectFirst:`1. 選擇第一個`,selectSecond:`2. 選擇第二個`,compareNow:`立即比較`,lastSynced:`上次同步：`,showingCount:`顯示 {{showing}} / {{total}} 個預設`,noPresetsFound:`未找到預設`,columns:{filament:`耗材`,process:`工藝`,printer:`印表機`},noFilamentPresets:`無耗材預設`,noProcessPresets:`無工藝預設`,noPrinterPresets:`無印表機預設`,filters:{type:`類型`,owner:`所有者`,printer:`印表機`,nozzle:`噴嘴`,filament:`耗材`,layer:`層`,all:`全部`,myPresets:`我的預設`,builtIn:`內建`,process:`工藝`},noTemplatesPermission:`您沒有管理範本的權限`,noRefreshPermission:`您沒有重新整理設定檔案的權限`,noCreatePermission:`您沒有建立預設的權限`},templates:{title:`快速範本`,noTemplates:`尚無範本`,createFirst:`從預設編輯器建立範本`,typeFilter:`類型：`,deleteTitle:`刪除範本`,deleteWarning:`此操作無法復原`,deleteConfirm:`確定要刪除"{{name}}"嗎？`,namePlaceholder:`範本名稱`,descriptionPlaceholder:`描述`,settingsJson:`設定 (JSON)`,fieldsCount:`{{count}} 個欄位`,shownInModals:`在對話方塊中顯示`,hiddenInModals:`在對話方塊中隱藏`,apply:`套用`,toast:{deleted:`範本已刪除`,updated:`範本已更新`,created:`範本已建立`,applied:`範本已套用`}}},support:{debugLoggingActive:`偵錯日誌紀錄已啟用`,manageLogs:`管理`,collectItem7:`印表機連線和韌體版本`,collectItem8:`整合狀態（Spoolman、MQTT、HA）`,collectItem9:`網路介面（僅子網）`,collectItem10:`Python 套件版本`,collectItem11:`資料庫健康檢查`,collectItem12:`Docker 環境詳情`,bundleGenerating:`正在產生套件...`,bundleStepConnection:`正在執行印表機連線檢查`,bundleStepVirtualPrinters:`正在執行虛擬印表機設定檢查`,bundleStepLogScan:`正在掃描最近的日誌以尋找已知問題`,bundleStepBuild:`正在建立支援套件 ZIP 檔案`},fileManager:{variants:{badge:`{{count}} 個版本`,groupAction:`歸為版本群組`,groupTooltip:`將這些檔案標記為針對不同印表機切片的同一工作`,grouped:`已將 {{count}} 個檔案歸為版本群組`,printAlternatives:`列印（{{count}} 個備選）`},title:`檔案管理器`,subtitle:`組織和管理您的列印檔案`,uploadFiles:`上傳檔案`,newFolder:`新增資料夾`,folderName:`資料夾名稱`,folderNamePlaceholder:`例如：功能零件`,renameFile:`重新命名檔案`,renameFolder:`重新命名資料夾`,invalidFilenameChar:`列印檔案名稱中不允許使用字元 "{{char}}"。印表機 SD 卡拒絕以下字元: < > : " / \\ | ? *`,moveFiles:`移動 {{count}} 個檔案`,rootNoFolder:`根目錄（無資料夾）`,current:`目前`,linkFolder:`連結資料夾`,linkFolderDescription:`將"{{name}}"連結到專案或歸檔以便快速存取。`,project:`專案`,archive:`歸檔`,noProjectsFound:`未找到專案`,noArchivesFound:`未找到歸檔`,unlink:`取消連結`,link:`連結`,dragDropFiles:`將檔案拖放到此處`,dropFilesHere:`將檔案放在此處`,releaseToUpload:`釋放以上傳`,orClickToBrowse:`或點選瀏覽`,allFileTypesSupported:`支援所有檔案類型。ZIP 檔案將被解壓。`,zipFilesDetected:`偵測到 ZIP 檔案`,zipExtractOptions:`ZIP 檔案將被解壓。選擇如何處理資料夾結構：`,preserveZipStructure:`保留 ZIP 中的資料夾結構`,createFolderFromZip:`從 ZIP 檔名建立資料夾`,stlThumbnailGeneration:`STL 縮圖產生`,zipMayContainStl:`ZIP 檔案可能包含 STL 檔案。可以在解壓時產生縮圖。`,thumbnailsCanBeGenerated:`可以為 STL 檔案產生縮圖。大型模型可能需要更長時間處理。`,generateThumbnailsForStl:`為 STL 檔案產生縮圖`,threemfDetected:`偵測到 3MF 檔案`,threemfExtractionInfo:`將自動從 3MF 檔案中提取印表機型號、材料、顏色和列印設定。`,willBeExtracted:`將被解壓`,filesExtracted:`已解壓 {{count}} 個檔案`,uploadComplete:`上傳完成：{{succeeded}} 個成功`,uploadFailed:`上傳失敗`,zipFilesFailed:`{{count}} 個檔案失敗`,uploading:`上傳中...`,changeLink:`更改連結...`,linkTo:`連結到...`,linkToProjectOrArchive:`連結到專案或歸檔`,generateThumbnail:`產生縮圖`,generateThumbnails:`產生縮圖`,generateThumbnailsForMissing:`為缺少縮圖的 STL 檔案產生縮圖`,gridView:`網格檢視`,listView:`列表檢視`,lowDiskSpaceWarning:`磁碟空間不足警告`,lowDiskSpaceDetails:`僅剩 {{free}}（總共 {{total}}）。閾值設定為 {{threshold}} GB。`,files:`檔案`,folders:`資料夾`,size:`大小`,free:`剩餘`,allFiles:`所有檔案`,allExternal:`外部`,externalIsEmpty:`沒有外部檔案`,externalEmptyDescription:`已連結的外部資料夾中的檔案將顯示於此。`,wrap:`換行`,enableTextWrapping:`啟用文字換行`,disableTextWrapping:`停用文字換行`,collapse:`折疊`,collapseFoldersByDefault:`預設折疊資料夾`,expandFoldersByDefault:`預設展開資料夾`,folderSort:`資料夾排序`,folderSortByName:`依名稱`,folderSortByActivity:`依最近活動`,dragToResizeTooltip:`拖曳調整大小，雙擊重設`,searchFiles:`搜尋檔案...`,searchSubfoldersHint:`包含子資料夾`,readme:{truncated:`已截斷`,show:`顯示 README`,hide:`隱藏 README`,label:`README`},tags:{title:`標籤`,subtitle:`為檔案加上跨資料夾的標籤 —— 玩具、兒童安全、僅 PETG 等等。`,manage:`標籤`,manageTitle:`管理標籤目錄`,add:`新增標籤`,edit:`重新命名標籤`,name:`名稱`,fileCount:`檔案數`,empty:`還沒有標籤。建立一個開始為檔案加標籤吧。`,noMatches:`沒有符合的標籤。`,createPlaceholder:`例：玩具、兒童安全、petg`,createButton:`建立`,nameRequired:`名稱為必填。`,searchPlaceholder:`過濾標籤…`,created:`已建立標籤。`,updated:`已重新命名標籤。`,deleted:`已刪除標籤。`,saveFailed:`無法儲存標籤。`,deleteFailed:`無法刪除標籤。`,applyFailed:`無法套用標籤。`,applyAdd:`新增標籤`,applyRemove:`移除標籤`,applyAddSuccess:`已為 {{files}} 個檔案新增 {{count}} 個標籤。`,applyRemoveSuccess:`已從 {{files}} 個檔案移除 {{count}} 個標籤。`,actionAdd:`加到所選檔案`,actionRemove:`從所選檔案移除`,tagAction:`標籤`,bulkTitle:`為所選的 {{count}} 個檔案加標籤`,bulkTooltip:`在每個所選檔案上新增或移除標籤。`,noPermission:`您沒有為檔案加標籤的權限。`,filterLabel:`篩選條件：`,clearAll:`全部清除`,confirmDelete:`刪除標籤 "{{name}}"？`,confirmDeleteMessage:`此動作會從目錄中刪除該標籤。檔案保留其他標籤。`,confirmDeleteInUseMessage:`此標籤存在於 {{count}} 個檔案上。刪除後所有檔案上的標籤都會消失，但檔案本身不會動。`,editAria:`編輯 {{name}}`,deleteAria:`刪除 {{name}}`},allTypes:`所有類型`,prints:`列印`,ascending:`升序`,descending:`降序`,showModified:`顯示修改日期`,hideModified:`隱藏修改日期`,lastModified:`最後修改`,lastActivity:`最近活動`,resultsCount:`{{showing}} / {{total}} 個檔案`,selectAll:`全選`,deselectAll:`取消全選`,selected:`已選擇 {{count}} 個`,adding:`新增中...`,loadingFiles:`載入檔案中...`,folderIsEmpty:`資料夾為空`,noFilesYet:`尚無檔案`,folderEmptyDescription:`上傳檔案或將檔案移入此資料夾以開始使用。`,noFilesDescription:`上傳檔案以開始組織您的列印相關檔案。`,noMatchingFiles:`沒有匹配的檔案`,noMatchingFilesDescription:`沒有檔案匹配您目前的搜尋或篩選條件。`,clearFilters:`清除篩選`,printedCount:`已列印 {{count}} 次`,uploadedBy:`上傳者`,deleteFolder:`刪除資料夾`,deleteFile:`刪除檔案`,deleteFilesCount:`刪除 {{count}} 個檔案`,deleteFolderConfirm:`確定要刪除此資料夾嗎？其中的所有檔案也將被刪除。`,deleteFileConfirm:`確定要刪除此檔案嗎？`,deleteFilesConfirm:`確定要刪除 {{count}} 個選中的檔案嗎？此操作無法復原。`,deleting:`刪除中...`,noPermissionRenameFolder:`您沒有重新命名資料夾的權限`,noPermissionLinkFolder:`您沒有連結資料夾的權限`,noPermissionDeleteFolder:`您沒有刪除資料夾的權限`,onlyEmptyFoldersDeletable:`您只能刪除空資料夾`,noPermissionPrint:`您沒有列印的權限`,noPermissionSlice:`您沒有切片檔案的權限`,noPermissionAddToQueue:`您沒有新增到佇列的權限`,noPermissionDownload:`您沒有下載檔案的權限`,noPermissionPreview:`您沒有預覽檔案的權限`,preview3d:`3D 預覽`,noPermissionRenameFile:`您沒有重新命名此檔案的權限`,noPermissionGenerateThumbnail:`您沒有產生縮圖的權限`,noPermissionDeleteFile:`您沒有刪除此檔案的權限`,noPermissionCreateFolder:`您沒有建立資料夾的權限`,noPermissionUpload:`您沒有上傳檔案的權限`,noPermissionMoveFiles:`您沒有移動檔案的權限`,noPermissionDeleteFiles:`您沒有刪除檔案的權限`,linkExternal:`連結外部`,linkExternalFolder:`連結外部資料夾`,linkExternalFolderDescription:`將主機目錄（NAS、USB、網路共享）掛載到檔案管理器中。檔案不會被複制——直接從原始路徑存取。`,externalFolderNamePlaceholder:`例如：NAS列印檔案`,externalPath:`主機路徑`,externalPathHelp:`Docker主機上目錄的絕對路徑。必須以繫結掛載方式掛載到容器中。`,readOnly:`只讀`,readOnlyHelp:`防止上傳和刪除`,showHiddenFiles:`顯示隱藏檔案（點檔案）`,externalFolder:`外部資料夾`,scanFolder:`掃描`,toast:{folderCreated:`資料夾已建立`,openInSlicerFailed:`無法在切片軟體中開啟`,folderDeleted:`資料夾已刪除`,fileDeleted:`檔案已刪除`,filesDeleted:`已刪除 {{count}} 個檔案`,filesMoved:`檔案已移動`,folderLinked:`資料夾已連結`,folderUnlinked:`資料夾已取消連結`,externalFolderLinked:`外部資料夾已連結並掃描`,folderScanned:`掃描完成：新增 {{added}} 個，移除 {{removed}} 個`,addedToQueue:`已將 {{count}} 個檔案新增到佇列`,addedToQueuePartial:`已新增 {{added}} 個檔案，{{failed}} 個失敗`,failedToAddToQueue:`新增檔案失敗：{{error}}`,fileRenamed:`檔案已重新命名`,folderRenamed:`資料夾已重新命名`,thumbnailsGenerated:`已產生 {{count}} 個縮圖`,thumbnailsGeneratedPartial:`已產生 {{succeeded}} 個縮圖，{{failed}} 個失敗`,noStlMissingThumbnails:`沒有缺少縮圖的 STL 檔案`,failedToGenerateThumbnails:`產生縮圖失敗：{{error}}`,thumbnailGenerated:`縮圖已產生`,failedToGenerateThumbnail:`產生縮圖失敗：{{error}}`}},projects:{parentLabel:`父專案`,parentNone:`無（頂層專案）`,parentHint:`將此專案巢狀置於另一個專案下，其數據將彙總至主專案`,partOf:`屬於 {{name}}`,subProjectCount:`{{count}} 個子專案`,subProjectsOf:`{{name}} 的子專案`,collapseSubProjects:`摺疊子專案`,expandSubProjects:`展開子專案`,title:`專案`,subtitle:`組織和追蹤您的 3D 列印專案`,newProject:`新增專案`,editProject:`編輯專案`,deleteProject:`刪除專案`,projectName:`專案名稱`,description:`描述`,noProjects:`尚無專案`,noProjectsFiltered:`沒有{{status}}專案`,noProjectsFilteredHelp:`您沒有任何{{status}}專案。當專案狀態更改時，它們將出現在這裡。`,createFirst:`建立您的第一個項目以開始組織相關列印、追蹤進度和管理構建。`,createFirstButton:`建立您的第一個項目`,create:`建立`,files:`檔案`,prints:`列印`,plates:`板`,parts:`零件`,lastModified:`最後修改`,deleteConfirm:`確定要刪除此項目嗎？歸檔和佇列項目將被取消連結但不會被刪除。`,addFiles:`新增檔案`,removeFile:`移除檔案`,viewDetails:`檢視詳情`,namePlaceholder:`例如：Voron 2.4 構建`,urlLabel:`網址`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`網址必須以 http:// 或 https:// 開頭`,openExternalUrl:`開啟專案網址`,coverImageLabel:`封面圖片`,coverImageAlt:`專案封面圖片`,coverImageUpload:`上傳`,coverImageReplace:`替換`,coverImageRemove:`移除`,descriptionPlaceholder:`可選描述...`,color:`顏色`,targetPlates:`目標板數`,targetPlatesPlaceholder:`例如：25`,targetPlatesHelp:`列印任務數量`,targetParts:`目標零件數`,targetPartsPlaceholder:`例如：150`,targetPartsHelp:`所需零件總數`,targetSets:`每個檔案的份數`,targetSetsPlaceholder:`例如 10`,targetSetsHelp:`每個可列印檔案需要列印的次數`,tagsLabel:`標籤（逗號分隔）`,tagsPlaceholder:`例如：voron、功能件、禮物`,dueDate:`截止日期`,priority:`優先順序`,priorityLow:`低`,priorityNormal:`普通`,priorityHigh:`高`,priorityUrgent:`緊急`,statusActive:`進行中`,statusCompleted:`已完成`,statusArchived:`已歸檔`,done:`完成`,completed:`已完成`,failed:`失敗`,inQueue:`佇列中`,noPrintsYet:`尚無列印`,printJobs:`列印任務（板）`,partsPrinted:`已列印零件`,failedParts:`失敗零件`,import:`匯入`,export:`匯出`,importProject:`匯入專案`,exportAll:`匯出所有專案`,loading:`載入專案中...`,noEditPermission:`您沒有編輯專案的權限`,noDeletePermission:`您沒有刪除專案的權限`,noCreatePermission:`您沒有建立專案的權限`,noImportPermission:`您沒有匯入專案的權限`,noExportPermission:`您沒有匯出專案的權限`,toast:{created:`專案已建立`,updated:`專案已更新`,deleted:`專案已刪除`,imported:`專案已匯入`,multipleImported:`已匯入 {{count}} 個項目`,importFailed:`匯入失敗`,exported:`專案已匯出（僅中繼資料）`}},projectDetail:{notFound:`未找到專案`,backToProjects:`返回專案`,export:`匯出`,exportProject:`匯出專案`,noExportPermission:`您沒有匯出專案的權限`,noEditPermission:`您沒有編輯專案的權限`,partOf:`屬於：`,priorityLabel:`優先順序：`,noPrints:`此項目尚無列印`,status:{active:`進行中`,completed:`已完成`,archived:`已歸檔`},priority:{low:`低`,normal:`普通`,high:`高`,urgent:`緊急`},dueDate:{overdue:`已逾期`,today:`今天到期`,daysLeft:`還有 {{count}} 天`},progress:{platesProgress:`板進度`,partsProgress:`零件進度`,setsProgress:`完整套數`,sets:`套`,setsHint:`當每個可列印檔案都達到此次數時，即完成一套`,printJobs:`列印任務`,parts:`零件`,percentComplete:`{{percent}}% 完成`,remaining:`剩餘 {{count}} 個`},stats:{printJobs:`列印任務`,total:`總計`,failed:`{{count}} 個失敗`,partsPrinted:`已列印 {{count}} 個零件`,printTime:`列印時間`,filamentUsed:`耗材用量`},cost:{title:`成本追蹤`,filamentCost:`耗材成本`,energy:`能源`,totalCost:`總成本`,total:`總計`,includesBom:`含物料清單`,budget:`預算`,remaining:`剩餘`},subProjects:{title:`子專案 ({{count}})`,jobs:`{{count}} 個任務`},rollup:{title:`包含 {{count}} 個子專案`,progress:`整體進度`,percentComplete:`已完成 {{percent}}%`},notes:{title:`備註`,noEditPermission:`您沒有編輯備註的權限`,placeholder:`新增關於此項目的備註...`,empty:`尚無備註。點選編輯新增備註。`},files:{title:`檔案`,linkFolders:`從檔案管理器連結資料夾`,forQuickAccess:`到此項目以便快速存取。`,fileCount:`{{count}} 個檔案`,empty:`未連結資料夾。前往檔案管理器將資料夾連結到此項目。`,printedCount:`已列印 {{count}} 次`,progressTooltip:`已完成 {{done}}/{{target}} 次列印`,noFiles:`此資料夾中沒有檔案。`},bom:{title:`材料清單`,acquired:`已獲取 {{completed}}/{{total}}`,showAll:`顯示全部`,hideDone:`隱藏已完成`,addPart:`新增零件`,noAddPermission:`您沒有新增零件的權限`,partNamePlaceholder:`零件名稱（例如：M3x8 螺絲）`,partName:`零件名稱`,qty:`數量`,price:`價格 ({{currency}})`,sourcingUrlPlaceholder:`採購連結（可選）`,remarksPlaceholder:`備註（可選）`,deletePart:`刪除零件`,deleteConfirm:`確定要刪除"{{name}}"嗎？`,noUpdatePermission:`您沒有更新零件的權限`,noEditPermission:`您沒有編輯零件的權限`,noDeletePermission:`您沒有刪除零件的權限`,totalCost:`總成本：`,empty:`材料清單中沒有零件。新增硬體、電子元件或其他元件以追蹤需要採購的物品。`},timeline:{title:`活動時間線`,empty:`尚無活動。`},template:{saveAsTemplate:`儲存為範本`,noCreatePermission:`您沒有建立範本的權限`},queue:{title:`佇列`,viewAll:`檢視全部`,printing:`{{count}} 個列印中`,queued:`{{count}} 個佇列中`},prints:{title:`列印 ({{count}})`},toast:{projectUpdated:`專案已更新`,partAdded:`零件已新增`,partRemoved:`零件已移除`,exportFailed:`匯出失敗`,projectExported:`專案已匯出`,templateCreated:`範本已建立`}},system:{title:`系統資訊`,version:`版本`,uptime:`執行時間`,cpuUsage:`CPU 使用率`,memoryUsage:`記憶體使用率`,diskUsage:`磁碟使用率`,networkInfo:`網路資訊`,logs:`日誌`,debugMode:`偵錯模式`,enableDebug:`啟用偵錯日誌`,disableDebug:`停用偵錯日誌`,downloadLogs:`下載日誌`,clearLogs:`清除日誌`,dockerInfo:`Docker 資訊`,containerName:`容器名稱`,imageName:`映象名稱`,platform:`平臺`,architecture:`架構`},sponsors:{sectionTitle:`獨立運作·社群支持`,tagline:`Bambuddy 完全免費，並將持續免費——感謝主動支持的使用者。沒有創投，也沒有雲端綁定。`,viewSupporters:`查看支持者`,toastPrints:`你已經用 Bambuddy 完成了 {{count}} 次列印。Bambuddy 之所以免費，要感謝支持者。`,toastCost:`你已經用 Bambuddy 追蹤了 {{total}} 的耗材。看看是誰讓專案保持獨立。`,toastArchives:`用 Bambuddy 封存了 {{count}} 次列印。看看是誰讓它保持獨立。`,toastAnniversary:`與 Bambuddy 相伴一年了！看看是誰讓專案保持獨立。`,toastVersionUpdate:`已更新至 v{{version}}。Bambuddy 之所以免費，要感謝支持者。`,toastBusiness:`您正在 {{count}} 台印表機上執行 Bambuddy？我們為團隊提供支援方案：優先修復、開立發票，以及與維護者的直接聯繫管道。`,businessCta:`Bambuddy 商業版`,businessTitle:`Bambuddy 商業版`,businessTagline:`您正在管理 {{count}} 台印表機。我們為團隊和列印農場提供優先支援、商業授權與發票開立。`},library:{title:`耗材庫`,addFilament:`新增耗材`,editFilament:`編輯耗材`,deleteFilament:`刪除耗材`,vendor:`廠商`,material:`材料`,color:`顏色`,kFactor:`K 值`,temperature:`溫度`,noFilaments:`耗材庫中沒有耗材`,deleteConfirm:`確定要刪除此耗材嗎？`,importFromPrinter:`從印表機匯入`,exportToFile:`匯出到檔案`,runWithPipeline:{actionLabel:`以管線執行`,noPermission:`您沒有執行管線的權限`,modalTitle:`以管線執行`,confirmTitle:`確認執行`,confirmIntro:`預檢發現此次執行存在問題`,sourceHint:`來源`,pipelineHint:`管線`,targetHint:`目標`,pipelineListAria:`可用管線`,runAnyway:`仍然執行`,loading:`載入中…`,empty:`尚未儲存管線。請開啟切片對話框並點擊「另存為管線」建立一個。`,noTarget:`未設定目標印表機`,noTargetMessage:`此管線沒有目標印表機。請在設定中開啟並選擇一個。`,copies:`副本數`,copiesHint:`最多 {{n}}`,classTarget:`任意 {{model}}`,toast:{started:`管線執行已開始`,failed:`無法啟動執行`},issue:{printerNotSet:`此管線未設定目標印表機。`,printerNotFound:`目標印表機已不存在。`,printerDisabled:`目標印表機已停用。`,printerOffline:`目標印表機已離線。`,filamentType:`耗材槽 {{slot}}：預期 {{expected}}，AMS 實際 {{actual}}`,filamentColor:`耗材槽 {{slot}}：顏色不同（預期 {{expected}}，AMS 實際 {{actual}}）`,amsSlotMissing:`此印表機上沒有 AMS 槽 {{slot}}`,filamentUnverified:`耗材槽 {{slot}} 來自雲端 / 標準預設，無法靜態驗證。`,noClassMatches:`此安裝中沒有符合該管線目標型號類別（{{expected}}）的印表機。`,classNotSet:`管線目標設定為印表機類別但未選擇型號。`}}},slicerSettings:{presetValuesOutdatedSidecar:`目前顯示切片器預設值：切片 sidecar 版本早於此功能，無法提供預設的實際值。更新 sidecar 映像即可查看。未變更的項目仍使用預設。`,presetValuesNotConfigured:`目前顯示切片器預設值：未設定切片 sidecar，無法讀取預設的實際值。未變更的項目仍使用預設。`,presetValuesSidecarUnavailable:`目前顯示切片器預設值：切片 sidecar 未回應，無法讀取預設的實際值。未變更的項目仍使用預設。`,presetValuesUnavailable:`目前顯示切片器預設值：無法讀取所選預設的實際值。未變更的項目仍使用預設。`,filamentDefault:`預設`,fromFile:`來自檔案`,fromFileHint:`設計者在來源檔案中修改了此項，其值為 {{value}}。`,fromFilePrinterCoupled:`設計者的印表機`,fromFilePrinterCoupledHint:`針對該檔案設計時所用的印表機調校，在你的印表機上可能不正確或超出範圍。`,fromFileOverridesPreset:`覆寫預設`,fromFileOverridesPresetHint:`檔案將其設為 {{value}}，而所選預設使用 {{preset}}。僅在應以檔案為準時才勾選。`,useFromFile:`對 {{option}} 使用來源檔案中的值`,otherFromFile:`此檔案中的其他設定`,fromFileSummary:`設計者在此檔案中改動了 {{count}} 項製程設定。只有你勾選的才會生效。`,fromFileUseAll:`使用設計者的設定`,fromFileUseAllHint:`勾選可跨印表機通用的設定。針對設計者自己印表機調校的，以及決定你所選預設集的那些，維持不勾選。`,fromFileClear:`清除 {{count}} 項`,loading:`正在載入切片設定…`,mode:{simple:`簡易`,advanced:`進階`,expert:`專家`},searchPlaceholder:`搜尋設定`,resetAll:`重設 {{count}} 項`,resetOption:`恢復預設值`,noMatches:`沒有符合搜尋的設定。`},slice:{filamentSlotUnset:`未設定`,processSettingsEmbedded:`啟用「使用檔案內建設定」時不生效——本次切片由檔案自身的設定決定。`,processSettingsInactive:`未啟用`,presetsHidden:`已隱藏 {{count}} 項`,showAllPresets:`顯示全部`,showFewerPresets:`顯示較少`,processSettings:`列印參數`,processSettingsHint:`為本次切片調整所選預設。未變更的項目仍依預設定義。`,processSettingsChanged:`已變更 {{count}} 項`,processSettingsUnchanged:`預設預設值`,title:`切片模型`,action:`切片`,actionAll:`切片全部 {{count}} 個盤面`,actionAllTitle:`將所有盤面切片為單一的多盤面輸出（單一封存）。線材選擇涵蓋專案定義的每個槽位。`,allPlatesToggle:`切片全部 {{count}} 個盤面`,slicing:`切片中…`,printer:`印表機設定檔`,process:`製程設定檔`,filament:`耗材設定檔`,filamentSlot:`耗材 {{index}}（{{type}}）`,filamentColour:`耗材顏色`,selectPreset:`— 選擇預設 —`,loadingPresets:`載入預設中…`,analyzingPlateFilaments:`分析列印板耗材中…`,analyzingPlateFilamentsHint:`正在執行預覽切片以發現此列印板使用的 AMS 插槽。之後會快取 — 重新開啟是即時的。`,previewToast:`分析 {{name}} — {{elapsed}}`,previewWithProgress:`分析 {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— 此列印板未使用`,noPresetsForSlot:`無可用預設`,otherPrinters:`其他印表機`,presetsLoadFailed:`載入預設失敗。請先開啟設定 → 設定檔以匯入。`,refreshPresets:`重新整理`,refreshPresetsTitle:`重新整理預設 — 擷取最新的雲端與打包設定清單（在 Bambu Studio 或 Bambu Handy 中刪除預設後使用）`,allPresetsRequired:`必須選擇所有預設`,useEmbedded:`使用檔案的內建設定`,useEmbeddedHint:`依設計者的設定（外牆、填充、耗材）切片，而非上方的設定檔。因您的印表機與檔案相符而可用。`,autoOrient:`自動擺正模型`,autoOrientHint:`切片前由切片器將每個模型轉到最適合列印的一面，會覆蓋檔案中儲存的朝向。`,autoArrange:`自動排列在熱床上`,autoArrangeHint:`由切片器重新擺放模型，使其不再重疊，會取代檔案自帶的版面配置。`,enqueuing:`提交切片任務中…`,queued:`已排隊…`,failed:`切片失敗。請檢查切片器 sidecar 日誌。`,startedToast:`在背景切片 {{name}}…`,queuedToast:`已排隊：{{name}} — {{elapsed}}`,runningToast:`切片 {{name}} — {{elapsed}}`,runningWithProgress:`{{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,runningWithProgressMultiPlate:`盤面 {{plateIndex}} / {{plateCount}} • {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,completedToast:`已切片 {{name}}`,externalWriteFallbackToast:`已儲存到內部庫：無法寫入外部資料夾`,failedTitle:`切片失敗`,failedToast:`切片 {{name}} 失敗：{{detail}}`,tier:{local:`已匯入`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`標準`},cloud:{notAuthenticated:`登入 Bambu Cloud（設定 → 設定檔 → Bambu Cloud）以查看雲端預設。`,expired:`Bambu Cloud 工作階段已過期 — 請重新登入以重新整理雲端預設。`,unreachable:`目前無法存取 Bambu Cloud。本機和標準預設仍可使用。`},orcaCloud:{notAuthenticated:`登入 Orca Cloud（設定檔 → Orca Cloud）以查看您的 Orca 預設。`,expired:`Orca Cloud 工作階段已過期 — 請重新登入以重新整理您的 Orca 預設。`,unreachable:`Orca Cloud 目前無法存取。其他預設仍可正常使用。`},bedType:{label:`列印板`,auto:`自動（使用製程預設）`,coolPlate:`冷板`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`},pipelines:{label:`管線`,applyAria:`套用管線`,applyPrompt:`套用管線…`,empty:`無已儲存管線`,saveButton:`另存為管線`,saveTitle:`將目前四個槽位的選擇儲存為可重複使用的管線`,namePlaceholder:`管線名稱`,nameAria:`新管線名稱`,toast:{applied:`已套用「{{name}}」`,saved:`管線已儲存`,saveFailed:`儲存失敗`}}},spoolman:{title:`Spoolman 整合`,enabled:`Spoolman 已啟用`,url:`Spoolman URL`,connected:`已連線`,disconnected:`未連線`,testConnection:`測試連線`,sync:`同步`,syncing:`同步中...`,lastSync:`上次同步`,linkToSpoolman:`連結到 Spoolman`,openInSpoolman:`在 Spoolman 中開啟`,unlinkSpool:`取消連結耗材`,unlinkConfirmTitle:`取消指派料盤？`,unlinkConfirmMessage:`這將從此插槽中移除料盤。料盤本身的資料將保持不變。`,selectSpool:`選擇耗材`,noUnlinkedSpools:`無未指派的料盤`,linkSuccess:`料盤指派成功`,linkFailed:`料盤指派失敗`,unlinkSuccess:`料盤取消指派成功`,unlinkFailed:`料盤取消指派失敗`,linkedSpool:`已指派料盤`,spoolId:`耗材 ID`,fillSourceLabel:`(Spoolman)`,weight:`重量`,remaining:`剩餘`,disableWeightSync:`停用 AMS 估計重量同步`,disableWeightSyncDesc:`不從 AMS 估計值更新剩餘容量。如果您更喜歡 Spoolman 的用量追蹤而非 AMS 百分比估計，請使用此選項。新耗材仍將使用 AMS 估計值作為初始重量。`,reportPartialUsage:`報告失敗列印的部分用量`,reportPartialUsageDesc:`當列印失敗或被取消時，根據層進度報告估計的耗材使用量。`},locations:{title:`儲存位置`,subtitle:`管理貨架、抽屜等線軸實體存放位置`,add:`新增位置`,addShort:`新增`,edit:`編輯位置`,name:`名稱`,spools:`線軸`,sensors:`感測器`,empty:`尚無儲存位置。建立第一個貨架或抽屜。`,manage:`位置`,createPlaceholder:`例如：A 架、抽屜 1`,nameRequired:`位置名稱為必填`,created:`位置已建立`,updated:`位置已更新`,deleted:`位置已刪除`,saveFailed:`儲存位置失敗`,deleteFailed:`刪除位置失敗`,deleteBlocked:`刪除前請移走此位置上的所有線軸`,confirmDelete:`刪除「{{name}}」？`,confirmDeleteMessage:`此位置將從目錄中移除。請先移走線軸。`,confirmDeleteMessageWithSensors:`此位置將從目錄中移除。請先移走線軸。關聯的感測器也將一併刪除。`},inventory:{title:`耗材庫存`,subtitle:`管理您的料盤`,addToInventory:`新增至庫存`,addToInventoryPending:`正在新增...`,addToInventorySuccess:`料盤已新增至庫存`,addToInventoryFailed:`新增料盤至庫存失敗`,unknownSpoolTitle:`偵測到新耗材`,unknownSpoolMessage:`在 {{location}} 偵測到具有未知 RFID 標籤的料盤。是否立即新增至庫存？`,unknownSpoolSlot:`插槽`,bulk:{selectAllVisible:`選擇所有可見項`,selectRow:`選擇列`,selectGroup:`選擇群組`,selectionCount:`已選 {{count}} 個`,edit:`編輯`,printLabels:`列印標籤`,resetUsage:`重設使用量`,restore:`還原`,archive:`封存`,delete:`刪除`,clearSelection:`清除選擇`,editTitle:`批次編輯料盤`,editSubtitle:`將套用於選取的 {{count}} 個料盤。僅更新勾選的欄位。`,editHint:`在欄位中輸入即可標記為更新 — 僅傳送已勾選的列。留空欄位不會變更料盤（清空欄位僅能在單個料盤中操作）。`,useCustom:`使用「{{value}}」`,toggleField:`切換此欄位的更新`,changeCount:`將更新 {{count}} 個欄位。`,applyPending:`套用中...`,applyButton:`套用於 {{count}} 個料盤`,deleteTitle:`刪除選取的料盤`,archiveTitle:`封存選取的料盤`,restoreTitle:`還原選取的料盤`,resetUsageTitle:`重設選取料盤的使用量`,deleteMessage:`永久刪除 {{count}} 個料盤？此操作無法復原。`,archiveMessage:`封存 {{count}} 個料盤？之後可以還原。`,restoreMessage:`還原 {{count}} 個已封存的料盤？`,resetUsageMessage:`重設 {{count}} 個料盤的「總消耗」計數器？剩餘重量將被保留。`,updateSuccess:`已更新 {{count}} 個料盤`,updateFailed:`批次更新失敗`,updatePartial:`已更新 {{ok}} 個，{{failed}} 個失敗`,updateAllFailed:`{{count}} 個料盤更新全部失敗 — 已保留選擇以便重試`,deleteSuccess:`已刪除 {{count}} 個料盤`,deleteFailed:`批次刪除失敗`,deletePartial:`已刪除 {{ok}} 個，{{failed}} 個失敗`,deleteAllFailed:`{{count}} 個料盤刪除全部失敗 — 已保留選擇以便重試`,archiveSuccess:`已封存 {{count}} 個料盤`,archiveFailed:`批次封存失敗`,archivePartial:`已封存 {{ok}} 個，{{failed}} 個失敗`,archiveAllFailed:`{{count}} 個料盤封存全部失敗 — 已保留選擇以便重試`,restoreSuccess:`已還原 {{count}} 個料盤`,restoreFailed:`批次還原失敗`,restorePartial:`已還原 {{ok}} 個，{{failed}} 個失敗`,restoreAllFailed:`{{count}} 個料盤還原全部失敗 — 已保留選擇以便重試`,invalidHex:`請輸入 6 位十六進位字元 (RRGGBB) 或 8 位 (RRGGBBAA)，否則此欄位不會套用。`},spoolmanMixedContentTitle:`Spoolman 無法透過 HTTPS 載入 — 瀏覽器已封鎖混合內容`,spoolmanMixedContentBody:`Bambuddy 透過您的反向代理以 HTTPS 提供服務，但您的 Spoolman 位址仍為 HTTP。基於安全考量，瀏覽器會封鎖混合內容，因此內嵌的 Spoolman 介面無法載入。Spoolman 也必須可透過 HTTPS 存取。`,spoolmanMixedContentFixReverseProxy:`請將 Spoolman 置於與 Bambuddy 相同的反向代理（Traefik / Nginx / Caddy）之後並啟用 HTTPS，然後在設定中將 Spoolman URL 更新為新的 HTTPS 位址。`,spoolmanMixedContentFixOpenNewTab:`作為替代方案，可在新分頁以 HTTP 開啟 Spoolman — 混合內容規則僅適用於內嵌框架，獨立分頁仍可正常運作。`,spoolmanOpenInNewTab:`在新分頁開啟 Spoolman`,labels:{title:`列印線材標籤`,selectedCount:`已選 {{count}} 項`,pickSpools:`選擇要列印標籤的線材：`,monochrome:`單色（黑白印表機）`,monochromeHint:`移除顏色色塊並加寬文字`,startingPosition:`標籤起始位置`,startingPositionRange:`僅適用於標籤紙範本：L7160 支援 1–21；5160 支援 1–30。`,startingPositionInvalid:`請輸入 1 到 {{capacity}} 之間的整數。`,startingPositionFirst:`從位置 1 開始列印。`,startingPositionSkipped:`第一張標籤紙的位置 1 到 {{lastPosition}} 將留空。`,startingPositionRangeError:`此標籤紙的起始位置必須在 1 到 {{capacity}} 之間。`,searchPlaceholder:`按名稱、品牌或 #ID 搜尋`,filterByMaterial:`材料：`,allMaterials:`全部`,selectVisible:`選擇所有可見 ({{count}})`,deselectVisible:`取消選擇可見`,clearAll:`全部清除`,noSpoolsToShow:`沒有要顯示的線材。請調整篩選條件後重試。`,noMatches:`沒有線材符合目前搜尋或篩選。`,printOne:`列印此線材的標籤`,printLabels:`列印標籤…`,bulkTitle:`從目前顯示的 {{count}} 個線材中選擇要列印標籤的`,noSpoolsTitle:`沒有要貼標籤的線材`,error:`無法產生標籤：{{msg}}`,sortBy:{label:`排序：`,id:`按 ID`,color:`按顏色`},templates:{amsHolderSmall:{label:`AMS 支架 — 小 (74 × 33 mm)`,hint:`每頁一個標籤；對應 MakerWorld 模型 752566 (AMS 耗材標籤支架) 中可列印的標籤。`},amsHolderLarge:{label:`AMS 支架 — 大 (75 × 55 mm)`,hint:`每頁一個標籤；對應 AMS 耗材標籤支架的紙卡插入款。空間足夠放置色塊、品牌、材質、ID 與 QR 碼。`},box40x30:{label:`盒標籤 (40 × 30 mm)`,hint:`每頁一張；常見的 DK/Brother 捲尺寸,適合用於耗材袋與儲物盒標籤。`},box:{label:`Box label (62 × 29 mm)`,hint:`每頁一個標籤；適配 Brother PT/QL 和 Dymo 小標籤。`},averyL7160:{label:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,hint:`歐洲規格紙張；每張 A4 頁 21 個標籤。`},avery5160:{label:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,hint:`美國規格紙張；每張 Letter 頁 30 個標籤。`}}},csv:{importButton:`匯入 CSV`,exportButton:`匯出 CSV`,modalTitle:`從 CSV 匯入耗材`,selectFile:`選擇 CSV 檔案或拖放到此處`,dragHint:`標頭：material（必填）、brand、subtype、color_name、rgba、…`,parsing:`正在讀取檔案…`,previewError:`無法讀取 CSV 檔案`,validCount:`{{count}} 個有效`,errorCount:`{{count}} 個錯誤`,skippedCount:`{{count}} 個略過`,colRow:`列`,colStatus:`狀態`,colColor:`顏色`,colorResolved:`已從目錄填入顏色`,colorCrossMaterial:`顏色取自其他材料 — 目錄中無精確匹配`,duplicateExisting:`已存在具有此材料、品牌和顏色的線材卷 — 仍會作為新線材卷匯入`,spoolmanHint:`在 Spoolman 模式下，請使用 Spoolman 內建的 CSV 匯入/匯出。`,importValidRows:`匯入 {{count}} 個有效列`,noValidRows:`沒有有效列`,importing:`正在匯入…`,importSuccess:`已匯入 {{count}} 個耗材`,importError:`匯入失敗`,exportError:`匯出失敗`},addSpool:`新增耗材`,editSpool:`編輯耗材`,copySpool:`複製耗材`,material:`材料`,selectMaterial:`選擇材料...`,subtype:`子類型`,brand:`品牌`,searchBrand:`搜尋品牌...`,useCustomBrand:`使用"{{brand}}"`,useCustomMaterial:`使用自訂材料：{{material}}`,suggestedOptions:`推薦`,allOptions:`全部`,colorName:`顏色名稱`,colorNamePlaceholder:`翡翠白、烈焰紅...`,color:`顏色`,hexColor:`十六進位顏色`,pickColor:`選擇自訂顏色`,labelWeight:`標籤重量`,coreWeight:`空盤重量`,searchSpoolWeight:`搜尋耗材重量...`,weightUsed:`已使用`,currentWeight:`剩餘重量`,measuredWeight:`稱量重量`,spoolName:`料盤`,costPerKg:`每公斤成本`,storageLocation:`存放位置`,temperature:`溫度`,humidity:`濕度`,battery:`電池`,storageLocationPlaceholder:`例如：貨架A，抽屜1`,openInInventory:`在庫存中查看`,measuredWeightError:`稱量重量必須在 {{min}}g 到 {{max}}g 之間。`,slicerFilament:`切片耗材`,slicerFilamentName:`切片預設名稱`,slicerPreset:`切片預設`,searchPresets:`搜尋耗材預設...`,selectedPreset:`已選擇`,noPresetsFound:`未找到預設`,tempOverrides:`溫度覆蓋`,note:`備註`,notePlaceholder:`關於此耗材的任何備註...`,category:`類別`,categoryPlaceholder:`例如：生產、原型、客戶A`,categoryNone:`未分類`,storageLocationNone:`未設定位置`,lowStockThresholdOverride:`低庫存閾值（此料盤）`,lowStockThresholdOverrideHelp:`留空以使用全域閾值（{{global}}%）。`,clearRfid:`清除 RFID 標籤`,rfidCleared:`RFID 標籤已清除`,archive:`歸檔`,restore:`恢復`,noSpools:`尚無耗材。新增您的第一個耗材開始使用。`,noAvailableSpools:`沒有可用的耗材。請先向庫存中新增耗材，或從其他槽位取消指派一個耗材。`,kProfiles:`K 值設定`,addKProfile:`新增 K 值設定`,assignSpool:`分配耗材`,unassignSpool:`取消分配`,assignSuccess:`耗材已分配，AMS 槽位已設定`,assignPendingInsert:`已分配。插入耗材後將設定槽位。`,assignFailed:`分配耗材失敗`,assignMismatchTitle:`材料不符`,assignMismatchMessage:`所選料盤材料 "{{spoolMaterial}}" 與 {{location}} 的料槽材料 "{{trayMaterial}}" 不符。仍要分配嗎？`,assignMismatchConfirm:`仍然分配`,assignPartialMismatchMessage:`料盤材料 "{{spoolMaterial}}" 與 {{location}} 的 "{{trayMaterial}}" 相近但不完全一致。是否繼續？`,assignProfileMismatchMessage:`料盤設定 "{{spoolProfile}}" 與 {{location}} 的料槽設定 "{{trayProfile}}" 不一致。是否繼續？`,assignReconfigureNote:`AMS 槽位將重新設定為使用料盤的設定。`,selectSpool:`選擇要分配到此槽位的耗材`,assigned:`已分配`,assigning:`分配中...`,searchSpools:`搜尋耗材...`,showAllSpools:`顯示所有耗材`,spoolmanSpools:`Spoolman 線軸`,allMaterials:`所有材料`,filterByBrand:`按品牌篩選...`,showArchived:`顯示已歸檔`,quickAdd:`快速新增（庫存）`,quantity:`數量`,stock:`庫存`,configured:`已設定`,spoolsCreated:`已建立 {{count}} 個耗材`,spoolsPartiallyCreated:`已建立 {{created}} / {{total}} 個耗材（部分失敗）`,spoolCreated:`耗材已建立`,spoolUpdated:`耗材已更新`,spoolDeleted:`耗材已刪除`,deepLinkSpoolNotFound:`找不到耗材`,deepLinkFetchFailed:`無法載入耗材 — 請重試`,spoolArchived:`耗材已歸檔`,spoolRestored:`耗材已恢復`,kProfileSaveFailed:`K值設定檔設定無法儲存`,syncWeightSpoolNotFound:`找不到耗材 — 可能已被刪除`,syncWeightSpoolmanUnreachable:`Spoolman 無法存取 — 請稍後再試`,syncWeightFailed:`重量同步失敗`,spoolmanUnreachable:`Spoolman 無法存取 — 請稍後再試`,deleteSpoolNotFound:`找不到耗材 — 可能已被刪除`,deleteFailed:`刪除耗材失敗`,archiveSpoolNotFound:`找不到耗材 — 可能已被刪除`,archiveFailed:`歸檔耗材失敗`,restoreSpoolNotFound:`找不到耗材 — 可能已被刪除`,restoreFailed:`恢復耗材失敗`,saveFailed:`儲存變更失敗`,tagClearFailed:`清除標籤失敗`,deleteConfirm:`確定要刪除此耗材嗎？此操作無法復原。`,archiveConfirm:`確定要歸檔此耗材嗎？`,advancedSettings:`進階設定`,filamentInfoTab:`耗材資訊`,paProfileTab:`PA 設定`,colorAndCostTab:`顏色與成本`,printersTab:`印表機`,filamentInfo:`耗材`,additional:`附加`,loadingPresets:`載入雲端預設中...`,cloudConnected:`雲端已連線`,cloudNotConnected:`雲端未連線（使用預設值）`,recentColors:`最近`,searchColors:`搜尋顏色...`,searchResults:`搜尋結果`,allColors:`所有顏色`,commonColors:`常用顏色`,showLess:`顯示更少`,showAll:`顯示全部`,noColorsFound:`沒有顏色匹配您的搜尋`,noResults:`未找到匹配項`,extraColorsLabel:`附加顏色`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`貼上 2 至 8 個十六進位色值,以逗號分隔。將以漸層方式呈現。`,extraColorsInvalid:`已略過無效的十六進位值:{{tokens}}`,colorEffectLabel:`效果`,colorEffect:{none:`無`,sparkle:`閃光`,wood:`木紋`,marble:`大理石`,glow:`夜光`,matte:`霧面`,silk:`絲光`,galaxy:`星空`,rainbow:`彩虹`,metal:`金屬`,translucent:`半透明`,gradient:`漸層`,dualColor:`雙色`,triColor:`三色`,multicolor:`多色`},selectMaterialFirst:`請先在耗材資訊分頁中選擇材料。`,noPrintersConfigured:`未設定印表機。新增印表機以使用 PA 設定。`,matchingFilter:`匹配`,anyBrand:`任何品牌`,anyVariant:`任何變體`,autoSelect:`自動選擇`,matches:`匹配`,match:`匹配`,noMatches:`無匹配`,connected:`已連線`,offline:`離線`,printerOffline:`印表機離線。連線後檢視校準設定。`,noKProfilesMatch:`沒有 K 值設定匹配所選耗材。`,leftNozzle:`左噴嘴`,rightNozzle:`右噴嘴`,profilesSelected:`個校準設定已選擇`,filamentPreset:`耗材預設`,presetUseSpoolDefault:`使用線材捲的預設`,presetInherited:`繼承`,presetOverride:`已覆寫`,presetNeedsModel:`此印表機尚未回報機型，因此無法設定專屬預設。`,autoMatchPresets:`自動比對`,autoMatchPresetsHint:`尋找線材捲預設中標示各機型的對應版本`,kProfilesPerPrinter:`K 值設定檔`,kProfileNotSet:`未設定`,kProfileFlowMismatch:`此設定檔是在 {{profile}} 噴嘴上測得的，但目前裝的是 {{fitted}} 噴嘴，因此不會套用`,nozzle:`噴嘴`,unknownModel:`未知機型`,onePrinter:`1 台印表機`,nPrinters:`{{n}} 台印表機`,filamentPresetsLoadFailed:`無法載入此線材捲的各機型預設`,filamentPresetSaveFailed:`無法儲存各機型預設`,totalInventory:`總庫存`,totalConsumed:`總消耗`,byMaterial:`按材料`,inPrinter:`在印表機中`,lowStock:`庫存不足`,sinceTracking:`自開始追蹤`,resetConsumedCounter:`重置計數器`,resetConsumedCounterTooltip:`將此料盤的已消耗克數計數器歸零。剩餘重量不會變更。`,resetConsumedCounterConfirm:`將此料盤的已消耗克數計數器重置為 0？後續列印將從零開始計算。料盤本身、剩餘重量計算與您的設定均不會變更。`,resetAllConsumedCounters:`重置所有計數器`,resetAllConsumedCountersTooltip:`將每個料盤的已消耗克數計數器歸零。剩餘重量不會變更。`,resetAllConsumedCountersConfirm:`將全部 {{count}} 個料盤（含已封存）的已消耗克數計數器重置為 0？這將清空「累計消耗」統計值，後續列印從零開始計算。料盤與剩餘重量不會變更。`,consumedCounterReset:`計數器已重置`,allConsumedCountersReset:`已重置 {{count}} 個料盤的計數器`,resetConsumedCounterFailed:`重置計數器失敗`,loadedInAms:`已裝載到 AMS/外接`,remaining:`剩餘`,weightCheck:`重量檢查`,lastWeighed:`上次稱量`,neverWeighed:`從未稱量`,search:`搜尋耗材...`,showing:`顯示`,to:`到`,of:`共`,show:`顯示`,spools:`個耗材`,spool:`個耗材`,page:`頁`,noSpoolsMatch:`未找到結果`,noSpoolsMatchDesc:`嘗試調整您的搜尋或篩選條件。`,active:`活躍`,archived:`已歸檔`,all:`全部`,used:`已使用`,new:`新的`,clearFilters:`清除篩選`,table:`表格`,cards:`卡片`,net:`淨重`,groupSimilar:`分組`,groupedSpools:`{{count}} 個相同耗材`,groupedRows:`行`,columns:`列`,configureColumns:`設定列`,configureColumnsDesc:`拖曳以重新排序列或使用箭頭。使用眼睛圖示切換可見性。`,visible:`可見`,reset:`重設`,cancel:`取消`,applyChanges:`套用更改`,moveUp:`上移`,moveDown:`下移`,hideColumn:`隱藏列`,showColumn:`顯示列`,linkToSpool:`連結到耗材`,tagLinked:`標籤已連結到耗材`,tagLinkFailed:`連結標籤失敗`,tagAlreadyLinked:`標籤已連結到耗材 #{{id}}`,unknownTag:`偵測到未知 RFID 標籤`,usageHistory:`使用歷史`,noUsageHistory:`尚無使用紀錄`,printName:`列印名稱`,weightConsumed:`消耗重量`,clearHistory:`清除`,historyCleared:`使用歷史已清除`,fillSourceLabel:`(庫存)`,lowStockThresholdError:`閾值必須在 0.1 到 99.9 之間`,spoolmanFilamentCatalog:`Spoolman 耗材目錄`,pickFromSpoolmanCatalog:`從 Spoolman 目錄選擇…`,spoolmanFilamentSelected:`已從 Spoolman 目錄選擇耗材`,spoolmanFilamentUnlinked:`已解除耗材目錄關聯`,noSpoolmanFilaments:`Spoolman 目錄中未找到耗材`,spoolmanFilamentColorSwatch:`耗材顏色`,spoolWeightManagedBySpoolman:`空線軸重量在 Spoolman 中按耗材類型管理`,spoolmanCatalogLoadFailed:`無法載入 Spoolman 耗材目錄`},timelapse:{title:`縮時攝影`,create:`建立縮時攝影`,download:`下載`,delete:`刪除`,preview:`預覽`,frameRate:`幀率`,quality:`品質`,processing:`處理中...`,noTimelapses:`無可用縮時攝影`},ams:{title:`AMS`,slot:`槽位`,empty:`空`,emptySlot:`空槽位`,slotEmpty:`空`,slotUnconfigured:`?`,emptySlotReset:`未指派線材`,unknown:`未知`,humidity:`濕度`,temperature:`溫度`,filamentType:`耗材類型`,filamentColor:`顏色`,remaining:`剩餘`,history:`AMS 歷史`,noHistory:`無可用歷史`,configureSlot:`設定槽位`,externalSpool:`外接耗材`,profile:`設定`,kFactor:`K 值`,kFactorShort:`K 值`,fill:`填充`,configure:`設定`,used:`已使用`,remainingUnit:`剩餘`},printModal:{variants:{editNote:`這些備選在工作加入佇列時確定。如需變更，請取消後重新加入佇列。`,title:`印表機備選`,help:`一項工作，佔一個佇列位。第一台空閒且相符的印表機會列印它對應的檔案。`,unknownModel:`未知型號`,plateFor:`{{filename}} 的列印板`,moveUp:`上移`,moveDown:`下移`,queued:`已加入佇列，含 {{count}} 個備選`},selectPrinter:`選擇印表機`,selectPlate:`選擇板`,filamentMapping:`耗材對應`,useArchiveMapping:`對應`,useArchiveMappingTooltip:`從此封存儲存的 AMS 對應（來自切片軟體）中選取所有槽位，而不是依類型/顏色比對。`,clickToChangeSlot:`點擊更改槽位分配`,reRead:`重新讀取`,plateN:`板 {{n}}`,plateFilamentsUnreadable:`無法讀取所選盤的耗材資訊，因此無法進行對應。取消選取該盤即可將其餘盤加入佇列。`,totalCost:`總成本：`,slotRemainingShort:` - 剩餘 {{grams}}g`,printSettings:`列印設定`,bedLeveling:`熱床調平`,flowCalibration:`流量校準`,vibrationCalibration:`振動校準`,layerInspection:`首層檢查`,timelapse:`縮時攝影`,cancel:`取消`,noPrintersAvailable:`無可用印表機`,printerBusy:`印表機忙碌`,printerOffline:`印表機離線`,sameTypeDifferentColor:`相同類型，不同顏色`,filamentTypeNotLoaded:`耗材類型未裝載`,statusReady:`就緒`,statusColorMismatch:`顏色不符`,statusTypeNotFound:`找不到類型`,requiredTooltip:`需要：{{name}} - {{color}}`,manuallySelected:`手動選擇`,autoMatched:`自動比對`,selectSlot:`選擇插槽`,sameTypeDifferentColorDetail:`相同類型，不同顏色：需要 {{required}}，插槽為 {{loaded}}`,requiredTypeNotInPrinter:`印表機中找不到所需的耗材類型。`,whenToPrint:`何時列印`,asap:`盡快`,queue:`佇列`,schedule:`排程`,dateTime:`日期和時間`,invalidDateTime:`請輸入有效的日期和時間`,openCalendar:`開啟日曆`,requireManualStart:`要求手動開始`,requirePreviousSuccess:`僅在上一次列印成功後開始`,autoOffAfter:`完成後關閉印表機`,helpAsap:`列印將新增到佇列頂端，並在符合條件的印表機閒置後立即開始。`,helpSchedule:`如果印表機閒置，列印將在排程時間開始。如果印表機忙碌，則會等待其可用。`,helpQueue:`列印將新增到佇列末端。`,leftNozzle:`左`,rightNozzle:`右`,leftNozzleTooltip:`左噴嘴`,rightNozzleTooltip:`右噴嘴`,ftsSameInletHint:`本次列印的所有耗材都在耗材變軌器 IN-{{inlet}} 上。同一入口的耗材之間切換較慢，可將其中一捲移到另一入口的 AMS。`,rackPosition:`刀架位置`,rackPositionTooltip:`由刀架上的哪個噴嘴列印此耗材。位置編號與印表機上一致。`,rackEmptyPosition:`此刀架位置為空`,rackWrongNozzle:`裝有 {{has}} 噴嘴；此耗材需要 {{needs}}`,filamentOverride:`耗材覆蓋`,filamentOverrideHint:`可選覆蓋用於基於模型的耗材分配。排程器將使用您選擇的耗材而不是原始 3MF 值進行匹配。`,originalFilament:`原始`,overrideWith:`覆蓋為`,resetToOriginal:`恢復為原始`,insufficientFilamentTitle:`耗材不足`,waitingForAmsStatus:`正在等待 {{printer}} 的 AMS 狀態…`,insufficientFilamentMessage:`部分已分配料盤的剩餘耗材少於本次列印所需：`,insufficientFilamentLine:`{{printer}} - {{slot}}：需要 {{required}}g，剩餘 {{remaining}}g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}：需要 {{required}}g，相符料卷共剩餘 {{remaining}}g（AMS 備用料盤）`,printAnyway:`仍然列印`,forceColorMatch:`強制顏色匹配`,staggerPrinterStarts:`錯開印表機啟動`,staggerGroupSize:`群組大小`,staggerInterval:`間隔（分鐘）`,staggerPreview:`{{printers}} 台印表機 → 分成 {{groups}} 組，每組 {{size}} 台，每 {{interval}} 分鐘啟動一組`,staggerLastGroup:`最後一組：{{count}}`,staggerTotal:`總計：{{minutes}} 分鐘`,staggerToPrinters:`分批傳送到 {{count}} 臺印表機`,gcodeInjection:`注入自動列印G-code`,insufficientBudget:`預算不足`,unlimitedNoBudget:`無限制 – 未設定預算上限。`,noPrintableCostCenters:`沒有可用於列印的有效成本中心。請聯絡管理員授予你列印權限。`},backup:{includesEncryptionKey:`本機備份包含 MFA 加密金鑰檔案（DATA_DIR/.mfa_encryption_key），因此備份 ZIP 是自包含的。請將 ZIP 視為敏感檔案 — 任何擁有該檔案的人都可以解密內部儲存的 OIDC 用戶端機密和 TOTP 機密。`,title:`備份與恢復`,createBackup:`建立備份`,restoreBackup:`恢復備份`,restoreDescription:`從備份檔案替換所有資料`,downloadBackup:`下載備份`,uploadBackup:`上傳備份`,lastBackup:`上次備份`,autoBackup:`自動備份`,backupNow:`立即備份`,restoreWarning:`警告：恢復備份將覆蓋所有目前資料。`,includeArchives:`包含歸檔`,includeSettings:`包含設定`,includeProfiles:`包含設定檔案`,backupSuccess:`備份建立成功`,restoreSuccess:`備份恢復成功`,backupFailed:`備份失敗`,restoreFailed:`恢復失敗`,restoreNote:`恢復期間虛擬印表機將停止`,githubBackup:`GitHub 備份`,enabled:`已啟用`,cloudLoginRequired:`需要登入 Bambu Cloud。請在 設定檔案 → 雲設定檔案 中登入以啟用 GitHub 備份。`,cloudLoginRequiredShort:`需要雲端登入`,githubDescription:`自動將您的設定檔案同步到私有 GitHub 倉庫以進行備份和版本歷史紀錄。`,repoIsPrivate:`儲存庫為私有 — 可安全備份。`,repoIsPublicWarning:`儲存庫為公開（PUBLIC）。Bambuddy 備份包含 MQTT 認證、Home Assistant 權杖、Prometheus 權杖、您的 Bambu Cloud 電子郵件，以及透過 K-profile 暴露的印表機存取碼。在您於服務商設定中將儲存庫改為私有之前，儲存將被阻擋。`,repoVisibilityUnknown:`無法確認儲存庫的可見性。Bambuddy 拒絕向任何未確認為私有的目標進行備份；儲存將被阻擋。`,repositoryUrl:`倉庫 URL`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`允許不安全的 HTTP`,allowInsecureHttpHint:`為無 TLS 的私人網路自托管執行個體啟用`,personalAccessToken:`個人存取權杖`,tokenSaved:`（已儲存）`,enterNewToken:`輸入新權杖以更新`,tokenHintGitHub:`具有 Contents 讀寫權限的細粒度權杖，或具有 repo 範圍的傳統權杖。`,tokenHintGitLab:`具有 api 範圍的權杖，或同時具有 read_repository 與 write_repository。`,tokenHintGitea:`具有 write:repository 範圍的權杖。`,tokenHintForgejo:`具有 write:repository 範圍的權杖。僅限於此存放庫的權杖即可。`,branch:`分支`,provider:`Git 供應商`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`僅手動`,hourly:`每小時`,daily:`每天`,weekly:`每週`,includeInBackup:`包含在備份中`,kProfiles:`K 設定檔案`,kProfilesDescription:`來自已連線印表機的壓力推進校準`,noPrintersConnected:`沒有印表機連線`,printersConnected:`{{connected}}/{{total}} 已連線`,cloudProfiles:`雲設定檔案`,cloudProfilesDescription:`來自 Bambu Cloud 和 Orca Cloud 的耗材、印表機和工藝預設`,cloudProfilesAccounts:`已連線帳戶 — Bambu Cloud：{{bambu}}，Orca Cloud：{{orca}}`,appSettings:`應用程式設定`,appSettingsDescription:`Bambuddy 設定（完整資料庫）`,spoolInventory:`耗材庫存`,spoolInventoryDescription:`耗材卷軸、使用紀錄和成本追蹤`,printArchives:`列印檔案`,printArchivesDescription:`列印歷史中繼資料（不含 gcode/3MF 檔案）`,lastBackupAt:`上次備份：`,noBackupsYet:`尚無備份`,next:`下次：`,startingBackup:`正在啟動備份...`,test:`測試`,enableBackup:`啟用備份`,testConnection:`測試連線`,enterRepoUrl:`請輸入倉庫 URL`,enterRepoAndToken:`請輸入倉庫 URL 和存取權杖`,repoRequired:`倉庫 URL 為必填項`,tokenRequired:`存取權杖為必填項`,githubBackupEnabled:`GitHub 備份已啟用`,tokenUpdated:`權杖已更新`,settingsSaved:`設定已儲存`,failedToSave:`儲存失敗：{{message}}`,backupCompleteFiles:`備份完成 - {{count}} 個檔案已更新`,backupSkippedNoChanges:`備份已跳過 - 無更改`,backupFailed2:`備份失敗：{{message}}`,clearedLogs:`已清除 {{count}} 條日誌`,failedToClearLogs:`清除日誌失敗：{{message}}`,restoreFromGit:{button:`從 Git 還原`,title:`從 Git 備份還原`,subtitle:`選擇提交以及要還原的項目`,commitLabel:`備份提交`,latestCommit:`最新備份（分支最新提交）`,categoriesLabel:`還原項目`,inspecting:`正在讀取備份內容...`,itemCount:`備份中有 {{count}} 筆`,overwriteLabel:`覆寫既有項目`,overwriteOn:`既有項目將依備份內容更新。`,overwriteOff:`僅新增缺少的項目，既有項目保持不變。`,selectedCount:`已選擇 {{count}} 筆`,restoring:`正在還原...`,confirmTitle:`要從備份還原嗎？`,confirmMessage:`將從此提交還原所選類別。缺少的項目會被新增，既有項目保持不變。`,confirmMessageOverwrite:`將從此提交還原所選類別，並覆寫本機已存在的項目。此操作無法復原。`,kprofilesOverwriteCaveat:`K 值設定檔是例外：寫入插槽一定會取代印表機上的校準資料。`,tally:`已還原 {{restored}} 筆、略過 {{skipped}} 筆、失敗 {{failed}} 筆`,reloadHint:`請重新載入 Bambuddy，讓還原的資料在各處生效。`,partialHint:`上方列出的類別已完成並已儲存。未列出的類別沒有執行。`,failed:`還原失敗。`,loadFailed:`無法讀取備份儲存庫。`,details:{notPresent:`此備份提交中不存在`,unreadableJson:`無法解析的 JSON：{{paths}}`,settingsNoPayload:`資料中沒有設定`,settingsCredentialsWillSkip:`將略過 {{count}} 個疑似憑證的鍵`,settingsCompanionWillSkip:`將略過 {{count}} 個疑似憑證的鍵，依賴它們的 {{companion}} 個開關會維持關閉`,settingsCompanionOnlyWillSkip:`{{companion}} 個開關會維持關閉 - 每個開關所需的憑證無法從備份還原`,spoolsUsageCount:`其中含 {{count}} 筆使用紀錄`,archivesMetadataOnly:`僅中繼資料 - 3MF 檔案與縮圖不在 Git 備份中`,kprofilesPrinterCount:`涵蓋 {{count}} 台印表機`},notes:{noData:`此備份中沒有這類資料`,archivesPrinterMissing:`部分封存參照了已不存在的印表機 - 已清除連結`,archivesProjectMissing:`部分封存參照了已不存在的專案 - 已清除連結`,archivesOwnerCleared:`部分封存參照了已不存在的使用者 - 已清除擁有者，因此在管理員重新指派之前，只有具備 archives:read_all 權限的使用者才看得到`,archivesOwnerUnmatched:`部分封存指向本執行個體沒有的使用者 - 已清除擁有者，而非依備份中的使用者 ID 推測，因此在管理員重新指派之前，只有具備 archives:read_all 權限的使用者才看得到`,archivesOwnerUnknown:`部分封存還原時沒有擁有者 - 此備份未記錄擁有者，因此在管理員指派之前，只有具備 archives:read_all 權限的使用者才看得到`,archivesUndeleted:`備份之後刪除的封存重新可見 - 當時啟用了覆寫`,archivesMetadataOnly:`還原的封存僅含中繼資料 - 3MF 檔案與縮圖不在 Git 備份中`,spoolUsageUnresolved:`已略過 {{count}} 筆使用紀錄 - 其耗材捲不在此備份的耗材清單中，沒有可掛接的對象。`,spoolUsageUnlinked:`已還原 {{count}} 筆使用紀錄，但缺少列印歷史連結 - 請同時選擇「列印封存」與「耗材庫存」以保留該連結。`,spoolTagKept:`{{count}} 個耗材標籤維持原樣 - 依備份內容會清除此後掃描過的標籤，或把它移到另一捲耗材上。`,settingsCredentialsSkipped:`已略過 {{count}} 個疑似憑證的鍵 - 請手動重新輸入密鑰`,settingsAuthSkipped:`已略過 {{count}} 項驗證設定 - 請在「設定 > 驗證」中修改，讓鎖定檢查繼續生效`,settingsCompanionSkipped:`{{keys}} 維持關閉 - 它們各自所需的憑證無法從備份還原，本執行個體也沒有儲存，開啟會讓整合處於未驗證狀態`,settingsMqttRelayFailed:`MQTT 設定已還原，但中繼無法重新連線 - 請重新啟動 Bambuddy`,kprofilesAlwaysOverwrite:`K 值設定檔一律覆寫印表機上對應的插槽`,kprofilesAckUnreliable:`印表機未回應時仍計為已還原 - 請在印表機上核對設定檔`,kprofilesPrinterMissing:`沒有序號為 {{serial}} 的印表機 - 已略過`,kprofilesPrinterOffline:`{{printer}}（{{serial}}）未連線 - 已略過`,kprofilesUnknownNozzle:`{{serial}} 的噴嘴直徑 {{nozzle}} 不在預期範圍內 - 已原樣傳送`,kprofilesUnmatched:`{{nozzle}} 的 {{count}} 個設定檔在 {{printer}} 上沒有對應項 - 已新增為新設定檔`,kprofilesSendFailed:`無法將 {{nozzle}} 的設定檔傳送到 {{printer}}（{{serial}}）`,kprofilesRefused:`{{printer}}（{{serial}}）拒絕了 {{nozzle}} 的設定檔：{{reason}}`,kprofilesStepFailed:`K 值設定檔步驟未能完成 - {{reason}}。在此之前還原的內容仍已儲存。`}},history:`歷史紀錄`,clear:`清除`,date:`日期`,status:`狀態`,trigger:`類型`,triggers:{manual:`備份（手動）`,scheduled:`備份（排程）`,restore:`還原`},commit:`提交`,localBackup:`本機備份`,localBackupDescription:`建立 Bambuddy 資料的完整備份，包括資料庫、檔案、上傳和所有檔案。`,downloadBackupLabel:`下載備份`,completeBackupZip:`完整備份：資料庫 + 所有檔案（ZIP）`,download:`下載`,preparingBackup:`正在準備備份...`,creatingArchive:`正在建立備份歸檔...對於大型歸檔可能需要一些時間。`,downloadingFile:`正在下載備份檔案...`,backupDownloaded:`備份下載成功`,failedToCreateBackup:`建立備份失敗：{{message}}`,restore:`恢復`,restoreReplacesAll:`恢復將替換所有資料。`,restoreReplacesAllDetail:`您目前的資料庫和檔案將被完全替換。恢復後需要重新啟動。`,restoreConfirmTitle:`恢復備份`,restoreConfirmMessage:`您確定要從"{{filename}}"恢復嗎？這將完全替換您目前的資料庫和所有檔案。恢復後需要重新啟動應用程式。`,restoreConfirmButton:`恢復備份`,uploadingFile:`正在上傳備份檔案...`,backupRestoredRestart:`備份已恢復。請重新啟動 Bambuddy。`,failedToRestore:`恢復備份失敗。請檢查檔案格式。`,reloadNow:`立即重新載入`,creatingBackup:`正在建立備份`,restoringBackup:`正在恢復備份`,preparing:`準備中...`,processing:`處理中...`,doNotClosePage:`請不要關閉此頁面或離開頁面。對於大型備份，此操作可能需要幾分鐘。`,restoring:`恢復中...`,restoreComplete:`恢復完成`,restoreFailed2:`恢復失敗`,importSettings:`從備份檔案匯入設定`,pleaseWaitRestoring:`請等待資料恢復中`,selectBackupFile:`點選選擇備份檔案（.json 或 .zip）`,duplicateHandling:`重複項處理方式：`,matchPrinters:`印表機`,matchPrintersBy:`按序列號匹配`,matchSmartPlugs:`智慧插座`,matchSmartPlugsBy:`按 IP 位址匹配`,matchNotificationProviders:`通知提供者`,matchNotificationProvidersBy:`按名稱匹配`,matchFilaments:`耗材`,matchFilamentsBy:`按名稱 + 類型 + 品牌匹配`,matchArchives:`檔案`,matchArchivesBy:`按內容雜湊匹配（始終跳過）`,matchPendingUploads:`待上傳`,matchPendingUploadsBy:`按檔名匹配`,matchSettingsTemplates:`設定和範本`,matchSettingsTemplatesBy:`始終覆蓋`,replaceExisting:`替換現有資料`,keepExisting:`保留現有資料`,overwriteDescription:`用備份資料覆蓋已存在的項目`,keepDescription:`僅恢復尚不存在的項目`,overwriteCaution:`注意：`,overwriteWarning:`覆蓋將用備份資料替換您目前的設定。出於安全考慮，印表機存取碼永遠不會被覆蓋。`,cancel:`取消`,processingBackup:`正在處理備份檔案...`,itemsRestored:`已恢復項目`,itemsSkipped:`已跳過項目`,restored:`已恢復`,skippedAlreadyExist:`已跳過（已存在）`,filesCategory:`檔案（3MF、縮圖等）`,andMore:`...還有 {{count}} 項`,newApiKeysGenerated:`已產生新的 API 金鑰`,keysShownOnce:`這些金鑰僅顯示一次。請立即複製！`,copy:`複製`,noDataFound:`在備份檔案中未找到可恢復的資料。`,close:`關閉`,scheduledBackup:`排程備份`,scheduledBackupDescription:`依排程自動建立備份快照。輸出目錄可掛載到 NAS 或外部儲存。`,frequency:`頻率`,backupTime:`時間`,retention:`保留`,retentionDescription:`保留的備份數量`,outputPath:`輸出路徑`,outputPathPlaceholder:`預設：{{path}}`,outputPathDescription:`留空以使用預設位置`,runNow:`立即執行`,backupFiles:`備份檔案`,noScheduledBackups:`尚無備份`,deleteBackup:`刪除`,deleteBackupConfirm:`要刪除此備份檔案嗎？`,backupRunning:`備份進行中…`,scheduledBackupComplete:`備份已成功完成`,scheduledBackupFailed:`備份失敗`,nextBackup:`下次備份`,backupSize:`大小`,localTimeHint:`本地時間 ({{tz}})`,defaultPathLabel:`預設：`,pathCheck:{title:`Bambuddy 無法寫入此目錄`,howToFix:`解決方法：`,sandboxed:`Bambuddy 服務無法寫入 {{path}}。其 systemd unit 以 ProtectSystem=strict 執行，因此安裝、資料與記錄目錄以外的所有目錄對服務而言都是唯讀的，即使你自己的 shell 可以寫入也一樣。`,read_only:`{{path}} 位於唯讀檔案系統上。`,permission_denied:`Bambuddy 沒有寫入 {{path}} 的權限。請檢查該目錄的擁有者與權限。`,no_space:`{{path}} 所在的檔案系統已滿。`,not_a_directory:`{{path}} 存在，但不是目錄。`,missing:`{{path}} 不存在且無法建立。`,error:`Bambuddy 無法寫入 {{path}}。`,ephemeralTitle:`這些備份在容器重建後會遺失`,container_ephemeral:`{{path}} 位於 Bambuddy 容器內，而非主機上。寫入其中的備份會在容器重建時遺失。請從主機掛載該目錄：`},categories:{settings:`設定`,notification_providers:`通知提供者`,notification_templates:`通知範本`,smart_plugs:`智慧插座`,printers:`印表機`,filaments:`耗材`,maintenance_types:`維護類型`,archives:`檔案`,projects:`專案`,pending_uploads:`待上傳`,external_links:`外部連結`,api_keys:`API 金鑰`}},tags:{title:`標籤`,addTag:`新增標籤`,editTag:`編輯標籤`,deleteTag:`刪除標籤`,tagName:`標籤名稱`,tagColor:`標籤顏色`,noTags:`無標籤`,deleteConfirm:`確定要刪除此標籤嗎？`,manageTags:`管理標籤`},uploadModal:{title:`上傳 3MF 檔案`,dragDrop:`將 .3mf 檔案拖放到此處`,or:`或`,browseFiles:`瀏覽檔案`,extractionInfo:`將從 3MF 檔案中繼資料中自動提取印表機型號。`,uploaded:`已上傳`,failed:`失敗`,uploading:`上傳中...`,upload:`上傳`,uploadFailed:`上傳失敗`},editArchive:{title:`編輯歸檔`,name:`名稱`,namePlaceholder:`列印名稱`,printer:`印表機`,noPrinter:`無印表機`,project:`專案`,noProject:`無專案`,itemsPrinted:`列印數量`,itemsPrintedHelp:`此列印任務中生產的物品數量。整塊列印板報廢時填 0。`,filamentUsed:`已用耗材 (g)`,filamentUsedPlaceholder:`例如 46.16`,filamentUsedHelp:`當列印工作在沒有 3MF 的情況下封存時，可手動填寫，使其仍計入耗材總量。重新掃描具有 3MF 的封存項目時，此數值會從檔案重新讀取。`,notes:`備註`,notesPlaceholder:`新增關於此列印的備註...`,externalLink:`外部連結`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`連結到 Printables、Thingiverse 或其他來源`,tags:`標籤`,tagsPlaceholder:`新增標籤...`,addMoreTags:`新增更多標籤...`,matchingTags:`匹配"{{query}}"`,existingTags:`現有標籤`,clickToAdd:`（點選新增）`,status:`狀態`,failureReason:`失敗原因`,selectReason:`選擇原因...`,photos:`列印成品照片`,photosHelp:`點選 + 新增列印成品照片`,printResult:`列印成品`,saving:`儲存中...`,failureReasons:{adhesionFailure:`附著力失敗`,spaghettiDetached:`拉絲 / 脫落`,layerShift:`層偏移`,cloggedNozzle:`噴嘴堵塞`,filamentRunout:`耗材用完`,warping:`翹曲`,stringing:`拉絲`,underExtrusion:`擠出不足`,powerFailure:`斷電`,userCancelled:`使用者取消`,noStatusUpdate:`未收到狀態更新`,other:`其他`},statuses:{completed:`已完成`,failed:`失敗`,aborted:`已取消`,printing:`列印中`}},kProfiles:{title:`K 值設定`,noPrintersConfigured:`未設定印表機`,addPrinterInSettings:`在設定中新增印表機以管理 K 值設定`,noActivePrinters:`無活躍印表機`,enablePrinterConnection:`啟用印表機連線以檢視其 K 值設定`,loadingProfiles:`載入 K 值設定中...`,printerOffline:`印表機離線`,printerOfflineDesc:`所選印表機未連線。開啟電源以檢視 K 值設定。`,noMatchingProfiles:`無匹配的設定`,noMatchingProfilesDesc:`沒有設定匹配您的搜尋條件`,noKProfiles:`無 K 值設定`,noKProfilesDesc:`未找到 {{diameter}}mm 噴嘴的壓力推進設定`,createFirstProfile:`建立第一個設定`,printer:`印表機`,nozzle:`噴嘴`,refresh:`重新整理`,addProfile:`新增設定`,export:`匯出`,import:`匯入`,select:`選擇`,selectAll:`全選`,delete:`刪除`,searchPlaceholder:`按名稱或耗材搜尋...`,allExtruders:`所有擠出機`,leftOnly:`僅左側`,rightOnly:`僅右側`,allFlow:`所有流量`,hfOnly:`僅高流量`,sOnly:`僅標準`,sortName:`排序：名稱`,sortKValue:`排序：K 值`,sortFilament:`排序：耗材`,leftExtruder:`左擠出機`,rightExtruder:`右擠出機`,modal:{addTitle:`新增 K 值設定`,editTitle:`編輯 K 值設定`,profileName:`設定名稱`,profileNamePlaceholder:`我的 PLA 設定`,kValue:`K 值`,kValuePlaceholder:`0.020`,kValueHelp:`典型範圍：PLA 0.01 - 0.06，PETG 0.02 - 0.10`,filament:`耗材`,selectFilament:`選擇耗材...`,source:{local:`已匯入`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`內建`},noFilamentsHelp:`沒有可用的耗材。請登入 Bambu Cloud，或在「設定檔 → 本地設定檔」中匯入預設。`,searchFilaments:`搜尋耗材...`,noFilamentMatches:`沒有符合搜尋條件的耗材`,flowType:`流量類型`,highFlow:`高流量`,standard:`標準`,nozzleSize:`噴嘴尺寸`,extruder:`擠出機`,extruders:`擠出機`,left:`左`,right:`右`,notes:`備註（本機儲存）`,notesPlaceholder:`新增關於此設定的備註...`,notesHelp:`備註儲存在 Bambuddy 中，不在印表機上`,syncing:`與印表機同步中...`,savingExtruder:`儲存到擠出機 {{current}}/{{total}}...`,pleaseWait:`請稍候`},deleteConfirm:{title:`刪除設定`,cannotUndo:`此操作無法復原`,message:`確定要從印表機刪除"{{name}}"嗎？`},bulkDelete:{title:`刪除設定`,cannotUndo:`此操作無法復原`,message:`確定要從印表機刪除 {{count}} 個選中的設定嗎？`},toast:{profileSaved:`K 值設定已儲存`,profilesSaved:`K 值設定已儲存到 {{count}} 個擠出機`,selectAtLeastOneExtruder:`請至少選擇一個擠出機`,selectFilament:`請先選擇耗材`,filamentNotResolvable:`沒有與 {{name}} 對應的 Bambu 耗材 ID，印表機無法儲存該設定檔`,profileDeleted:`K 值設定已刪除`,profilesDeleted:`已刪除 {{count}} 個設定`,exportedProfiles:`已匯出 {{count}} 個設定`,importedProfiles:`已匯入 {{count}} / {{total}} 個設定`,noProfilesToExport:`無可匯出的設定`,invalidFileFormat:`無效的檔案格式`,failedToParseImport:`解析匯入檔案失敗`,failedToSaveBatch:`批次儲存 K 值設定失敗`,noteSaved:`備註已儲存`,failedToSaveNote:`儲存備註失敗`},permission:{noRead:`您沒有重新整理設定的權限`,noCreate:`您沒有新增設定的權限`,noUpdate:`您沒有更新 K 值設定的權限`,noDelete:`您沒有刪除 K 值設定的權限`,noExport:`您沒有匯出設定的權限`,noImport:`您沒有匯入設定的權限`}},virtualPrinter:{title:`虛擬印表機`,running:`執行中`,stopped:`已停止`,description:{default:`啟用虛擬印表機，使其在 Bambu Studio 和 OrcaSlicer 中可見。傳送到此印表機的檔案將直接歸檔而不列印。`,proxy:`啟用代理，將切片軟體流量中繼到真實印表機，允許在任何網路上遠端列印。`},enable:{title:`啟用虛擬印表機`,visibleInSlicer:`在切片軟體發現中顯示為"Bambuddy"`,proxyingTo:`代理到 {{name}}`,notActive:`未啟用`},model:{title:`印表機型號`,description:`選擇要模擬的印表機型號。`,restartWarning:`更改型號將重新啟動虛擬印表機`},accessCode:{title:`存取碼`,isSet:`存取碼已設定`,notSet:`未設定存取碼 - 需要設定才能啟用`,placeholder:`輸入 8 位字元程式碼`,placeholderChange:`輸入新程式碼以更改`,hint:`必須恰好 8 個字元。切片軟體使用此程式碼進行認證。`,charCount:`({{count}}/8)`,inheritedFromTarget:`繼承自目標印表機`,derivedFromTargetHint:`使用目標印表機的存取碼。橋接會將切片軟體的認證轉發到實際印表機，因此兩個存取碼必須相符 — 如需變更，請在印表機設定中編輯存取碼。`,reveal:`顯示存取碼`,hide:`隱藏存取碼`},targetPrinter:{title:`目標印表機`,configured:`代理目標已設定`,notConfigured:`未選擇目標印表機 - 代理模式需要設定`,placeholder:`選擇印表機...`,hint:`選擇要將切片軟體流量代理到的印表機。印表機必須處於區域網路模式。`,noPrinters:`未設定印表機。請先新增印表機以使用代理模式。`},remoteInterface:{title:`網路介面覆蓋`,configured:`介面覆蓋已啟用`,optional:`可選 - 當自動檢測的 IP 不正確時使用（例如多網路卡、Docker、VPN）`,placeholder:`自動檢測（預設）...`,hint:`覆蓋透過 SSDP 廣播並在 TLS 憑證中使用的 IP 位址。在 Bambuddy 有多個網路介面時很有用。`},mode:{title:`模式`,archive:`歸檔`,archiveDesc:`立即歸檔檔案`,review:`審核`,reviewDesc:`歸檔前審核`,queue:`佇列`,queueDesc:`歸檔並新增到佇列`,proxy:`代理`,proxyDesc:`中繼到真實印表機`},autoDispatch:{title:`自動派發`,description:`新增到佇列時自動開始列印。關閉後，列印任務等待手動派發。`},queueForceColorMatch:{title:`強制顏色匹配`,description:`拒絕派發到沒有完全相同耗材類型和顏色的印表機。預設關閉 — 不啟用時，佇列僅按型號匹配，可能選到顏色錯誤的印表機。`},saveAmsMapping:{title:`儲存 AMS 對應`,description:`將切片軟體自行選擇的 AMS 槽位（來自 project_file MQTT 指令）儲存到封存中，讓之後的重新列印能重複使用同一捲實體線材，而不是依檔案的類型/顏色重新推導。預設關閉。`},gcodeInjection:{title:`G-code 注入`,description:`將「設定」中依型號設定的 G-code 片段套用到此 VP 的作業。預設關閉。`},tailscaleDisabled:{title:`Tailscale 整合`,description:`啟用以將此 VP 標記為透過 Tailscale 公開。顯示主機的 Tailscale 位址，以便您知道要貼上到切片器中的 IP。CA 匯入步驟保持不變 — 此切換對憑證無影響。`},setupRequired:{title:`需要設定`,description:`虛擬印表機功能需要額外的系統設定才能工作。包括埠轉發、防火牆規則和平臺特定設定。`,readGuide:`啟用前請閱讀設定指南`},archiveNameSource:{title:`存檔名稱來源`,description:`選擇透過虛擬印表機接收檔案時新存檔的命名方式。"元資料"使用 3MF 中嵌入的切片標題（預設）。"檔名"使用 Bambu Studio 透過 FTP 傳送的檔案名稱。注意：當 3MF 包含標題欄位時，Bambu Studio 會以該欄位覆寫您在"傳送到印表機"對話方塊中輸入的名稱，因此兩種模式通常會產生相同的字串。`,metadata:`元資料`,filename:`檔名`},caCert:{title:`切片軟體憑證`,description:`虛擬印表機使用由 Bambuddy CA 簽發的 TLS 憑證。將此 CA 憑證匯入切片軟體的信任庫一次，切片軟體即可接受連線 — 無需再透過命令列取得。`,copy:`複製`,copied:`已複製`,download:`下載`,fingerprint:`SHA-256`},howItWorks:{title:`工作原理`,step1:`在同一區域網路中，虛擬印表機會透過發現機制自動出現在您的切片軟體（Bambu Studio / OrcaSlicer）中。從其他網路，透過 IP 位址和存取碼手動新增。`,step2:`在歸檔、審核和佇列模式下，使用切片軟體中的"傳送"按鈕將 3MF 檔案上傳到 Bambuddy。切片軟體會顯示"列印成功"— 檔案已儲存，未列印。`,step3:`在代理模式下，虛擬印表機將所有流量中繼到真實印表機 — 列印會立即開始，就像直接連線一樣。`},status:{title:`狀態詳情`,printerName:`印表機名稱`,model:`型號`,serialNumber:`序列號`,mode:`模式`,pendingFiles:`待處理檔案`,targetPrinter:`目標印表機`,ftpPort:`FTP 連接埠`,mqttPort:`MQTT 連接埠`,ftpConnections:`FTP 連線`,mqttConnections:`MQTT 連線`},toast:{updated:`虛擬印表機設定已更新`,failedToUpdate:`更新設定失敗`,copyFailed:`複製失敗 — 請手動選取文字`,accessCodeRequired:`請先設定存取碼`,targetPrinterRequired:`請先選擇目標印表機`,bindIpRequired:`請先設定繫結 IP`,accessCodeEmpty:`存取碼不能為空`,accessCodeLength:`存取碼必須恰好 8 個字元`,targetCodeChangedRebind:`存取碼已同步到新的目標印表機。請在切片軟體中重新加入此裝置以使用新的存取碼。`,created:`虛擬印表機已建立`,failedToCreate:`建立虛擬印表機失敗`,deleted:`虛擬印表機已刪除`,failedToDelete:`刪除虛擬印表機失敗`},list:{title:`虛擬印表機`,add:`新增`,addFirst:`新增虛擬印表機`,empty:`未設定虛擬印表機。新增一個以開始使用。`},bindIp:{title:`繫結介面`,placeholder:`選擇介面...`,hint:`此虛擬印表機繫結的網路介面。每臺印表機必須唯一。`},proxy:{accessCodeHint:`在代理模式下，在切片軟體中使用目標印表機的存取碼。連線會透明轉發到真實印表機。`},addDialog:{title:`新增虛擬印表機`,name:`名稱`,hint:`建立後可以設定存取碼、目標印表機和其他設定。`,create:`建立`},deleteConfirm:{title:`刪除虛擬印表機`,message:`確定要刪除"{{name}}"嗎？這將停止此印表機的所有服務。`}},modelViewer:{openInSlicer:`在切片軟體中開啟`,openInSlicerWith:`用{{slicer}}開啟`,moreSlicerOptions:`更多切片軟體選項`,openInSlicerFailed:`無法在切片軟體中開啟`,tabs:{model:`3D 模型`},notAvailable:`不可用`,plates:`板`,allPlates:`所有板`,plateNumber:`板 {{number}}`,plateCount:`{{count}} 個板`,plateCount_other:`{{count}} 個板`,objectCount:`{{count}} 個物件`,objectCount_other:`{{count}} 個物件`,filamentCount:`{{count}} 種耗材`,filamentCount_other:`{{count}} 種耗材`,eta:`預計 {{minutes}} 分鐘`,noPreview:`此檔案無可用預覽`,pagination:{pageOf:`第 {{current}} / {{total}} 頁`,prev:`上一頁`,next:`下一頁`},errors:{failedToLoad:`載入檔案失敗`,noMeshes:`3MF 檔案中未找到網格`,unsupportedFormat:`不支援的檔案格式`}},maintenanceDescriptions:{lubricateCarbonRods:`在碳纖維杆上塗抹潤滑劑以確保順暢運動`,lubricateRails:`在線性導軌上塗抹潤滑劑以確保順暢運動`,cleanNozzle:`清潔熱端和噴嘴以防止堵塞`,checkBelts:`檢查皮帶張力以確保列印精度`,cleanBuildPlate:`清潔列印板以獲得更好的附著力`,checkExtruder:`檢查擠出機齒輪磨損情況`,checkCooling:`確保冷卻風扇正常工作`,generalInspection:`印表機綜合檢查`,cleanCarbonRods:`清潔碳纖維杆以減少摩擦`,lubricateSteelRods:`在鋼杆上塗抹潤滑劑以確保順暢運動`,cleanSteelRods:`清潔鋼杆以減少摩擦`,cleanLinearRails:`擦拭線性導軌以清除灰塵和碎屑`,checkPtfeTube:`檢查 PTFE 管的磨損或損壞`,replaceHepaFilter:`更換 HEPA 過濾器以保證空氣品質`,replaceCarbonFilter:`更換活性炭過濾器`,lubricateLeftNozzleRail:`潤滑左噴嘴導軌（H2 系列）`},haSensors:{label:`感測器`,unavailable:`無法使用`,blocksPrints:`{{entity}} — 警報期間暫停列印`,states:{open:`開啟`,closed:`關閉`,unlocked:`已解鎖`,locked:`已鎖定`,detected:`已偵測`,clear:`無`,wet:`潮濕`,dry:`乾燥`,problem:`異常`,ok:`正常`,running:`運轉中`,stopped:`已停止`,on:`開`,off:`關`},sectionTitle:`Home Assistant 感測器（印表機）`,add:`新增感測器`,addTitle:`新增 Home Assistant 感測器`,editTitle:`編輯 Home Assistant 感測器`,empty:`還沒有感測器。綁定 Home Assistant 的門磁或溫度計，即可顯示在印表機卡片上。`,unknownPrinter:`未知印表機`,badgeBlocks:`暫停列印`,badgeNotifies:`發送通知`,badgeHidden:`卡片上隱藏`,printer:`印表機`,entity:`實體`,searchPlaceholder:`搜尋實體...`,noEntities:`沒有相符的實體`,name:`顯示名稱`,alertWhen:`警報條件`,alertNever:`永不 — 僅顯示`,alertAbove:`高於`,alertBelow:`低於`,alertHint:`進入警報狀態後會在印表機卡片上醒目顯示，並啟用下方選項。`,showOnCard:`在印表機卡片上顯示`,notifyOnAlert:`觸發警報時發送通知`,blockPrint:`警報期間暫停佇列中的列印`,blockPrintHint:`工作會留在佇列中，感測器恢復後自動開始。Home Assistant 無法連線時會忽略此設定。`,toast:{created:`已新增感測器`,updated:`已儲存感測器`,deleted:`已移除感測器`},error:{pickEntity:`請選擇一個 Home Assistant 實體`,nameRequired:`請輸入顯示名稱`,printerRequired:`請選擇一台印表機`,alertRequired:`請先設定警報條件`}},locationHaSensors:{sectionTitle:`Home Assistant 感測器（存放位置）`,sectionDescription:`將 Home Assistant 的溫度、濕度或電量感測器綁定到存放位置，即可在線材卡片和表格中顯示即時數值。每個存放位置每個類別只能綁定一個感測器。`,add:`新增感測器`,addTitle:`新增 Home Assistant 感測器`,editTitle:`編輯 Home Assistant 感測器`,empty:`還沒有感測器。綁定 Home Assistant 的溫度或濕度感測器，即可顯示在線材卡片上。`,unknownLocation:`未知位置`,location:`存放位置`,showOnCard:`在線材卡片上顯示`,overwriteConfirm:{title:`要取代現有感測器嗎？`,messageTemperature:`"{{location}}" 已綁定溫度感測器：{{name}}。繼續將取代它。`,messageHumidity:`"{{location}}" 已綁定濕度感測器：{{name}}。繼續將取代它。`,messageBattery:`"{{location}}" 已綁定電池感測器：{{name}}。繼續將取代它。`},autoAdd:{confirmTitle:`是否也新增其他感測器？`,confirmMessage:`Bambuddy 也為此位置找到了其他感測器。請選擇要一併新增的感測器。`,added:`已同時新增：{{names}}`,noneFound:`未找到該位置相符的溫度、濕度或電池感測器。`,onlyThisOne:`僅此一個`},options:{buttonLabel:`感測器選項`,title:`位置感測器選項`,description:`當某個位置綁定第一個感測器時，若自動新增溫度、濕度或電池感測器，將使用這些預設值。`,generalSettings:`一般設定`,pollInterval:`更新間隔（秒）`,pollIntervalHint:`Bambuddy 輪詢 Home Assistant 並刷新畫面上感測器數值的頻率。最少 60 秒。`,colorizeValues:`依警示閾值為感測器數值著色`,aboveColor:`超過閾值的顏色`,belowColor:`低於閾值的顏色`,optimalColor:`最佳值顏色`,colors:{red:`紅色`,orange:`橙色`,yellow:`黃色`,green:`綠色`,blue:`藍色`,purple:`紫色`,pink:`粉色`},saved:`選項已儲存`,saveFailed:`儲存選項失敗`,reset:`重設`,resetConfirm:{title:`要重設所有現有位置感測器嗎？`,message:`這將使用上方設定的值覆寫所有現有儲存位置溫度、濕度及電池感測器的警示閾值、通知與卡片顯示設定，並將每個感測器的名稱還原為其在 Home Assistant 中的易記名稱——不會影響印表機感測器。此操作無法復原。依感測器數量不同，這可能需要一些時間。`},resetDone:`已套用至 {{count}} 個位置感測器`,resetFailed:`重設位置感測器失敗`},deleteAllConfirm:{title:`刪除所有感測器？`,message:`這將刪除綁定到"{{location}}"的全部 {{count}} 個感測器。此操作無法復原。`},currentlyBound:`目前綁定：{{entity}}`,error:{locationRequired:`請選擇存放位置`},toast:{created:`已新增感測器`,updated:`已儲存感測器`,deleted:`已移除感測器`}},smartPlugs:{offline:`離線`,admin:`管理`,openPlugAdminPage:`開啟插座管理頁面`,deleteSmartPlug:`刪除智慧插座`,turnOnSmartPlug:`開啟智慧插座`,turnOffSmartPlug:`關閉智慧插座`,turnOn:`開啟`,turnOff:`關閉`,addSmartPlug:{scanningNetwork:`掃描網路中...`,chooseEntity:`選擇實體...`,connectionFailed:`連線失敗`,searchEntities:`搜尋實體...`,searchPowerSensors:`搜尋功率感測器...`,searchEnergySensors:`搜尋能量感測器...`,placeholders:{plugName:`客廳插座`,mqttStateOnValue:`ON、true、1`,mqttSameAsPower:`與功率主題相同，或不同`}},linkedTo:`連結到：`,monitorOnly:`僅監控`,alerts:`警報`,scheduleOn:`開啟 {{time}}`,scheduleOff:`關閉 {{time}}`,on:`開啟`,off:`關閉`,power:`功率`,kwhToday:`今日kWh`,settings:`設定`,automationSettings:`自動化設定`,showInSwitchbar:`在開關欄顯示`,quickAccessSidebar:`從側邊欄快速存取`,enabled:`已啟用`,enableAutomation:`為此插座啟用自動化`,autoOn:`自動開啟`,autoOnDescription:`列印開始時開啟`,autoOff:`自動關閉`,autoOffDescription:`列印完成時關閉（一次性）`,autoOffPersistent:`保持啟用`,autoOffPersistentDescription:`在列印之間保持啟用而非一次性`,controlsPrinterPower:`為印表機供電`,controlsPrinterPowerDescription:`若此插座僅為配件（濾網風扇、燈光）供電，請關閉此選項；否則關閉插座會將印表機標記為離線。`,autoOffAfterDrying:`乾燥完成後自動關閉`,autoOffAfterDryingDescription:`AMS 乾燥完成後關閉`,delayAfterDryingMinutes:`乾燥後延遲（分鐘）`,turnOffDelayMode:`關閉延遲模式`,time:`時間`,temp:`溫度`,delayMinutes:`延遲（分鐘）`,tempThreshold:`溫度閾值（°C）`,tempThresholdDescription:`當噴嘴冷卻到此溫度以下時關閉`,edit:`編輯`,deleteConfirm:`確定要刪除"{{name}}"嗎？此操作無法復原。`,turnOnConfirm:`確定要開啟"{{name}}"嗎？`,turnOffConfirm:`確定要關閉"{{name}}"嗎？這將切斷連線裝置的電源。`,failedToTurn:`無法{{action}}"{{name}}"`,unknown:`未知`,addTitle:`新增智慧插座`,editTitle:`編輯智慧插座`,stopScanning:`停止掃描`,discoverTasmota:`發現Tasmota裝置`,foundDevices:`找到{{count}}個裝置 - 點選選擇：`,noDevicesFound:`未在您的網路中找到Tasmota裝置`,haNotConfigured:`Home Assistant未設定。請在以下位置設定`,haSettingsPath:`設定 → 網路 → Home Assistant`,selectEntity:`選擇實體 *`,ipAddress:`IP 位址 *`,nameLabel:`名稱 *`,username:`使用者名稱`,password:`密碼`,authHint:`如果您的Tasmota裝置不需要認證，請留空`,linkToPrinter:`連結印表機`,noPrinter:`無印表機（僅手動控制）`,linkingDescription:`連結後可在列印開始/完成時自動開關`,powerAlerts:`功率警報`,alertAbove:`高於時警報（W）`,alertBelow:`低於時警報（W）`,alertDescription:`當電力消耗超過這些閾值時收到通知。留空以停用該方向。`,dailySchedule:`每日計畫`,turnOnAt:`開啟時間`,turnOffAt:`關閉時間`,scheduleDescription:`每天在這些時間自動開關插座。留空以跳過該操作。`,showOnPrinterCard:`在印表機卡片上顯示`,displayOnPrinterCard:`在印表機卡片上顯示按鈕`,connectedResult:`已連線！`,deviceLabel:`裝置：{{name}} - `,stateLabel:`狀態：{{state}}`,test:`測試`,delete:`刪除`,save:`儲存`,add:`新增`,cancel:`取消`,failedToStartScan:`無法開始掃描`,nameRequired:`名稱為必填項`,entityRequired:`Home Assistant插座需要實體`,mqttTopicRequired:`必須為功率、能源或狀態監控設定至少一個MQTT主題`,loadingEntities:`正在載入實體...`,loading:`載入中...`,failedToLoadEntities:`載入實體失敗：{{error}}`,noEntitiesMatching:`未找到匹配"{{search}}"的實體`,noEntitiesAvailable:`無可用實體`,searchingEntities:`搜尋所有實體（找到{{count}}個）`,showingEntities:`顯示 switch、light、input_boolean（{{count}}個可用）`,energyMonitoringOptional:`能源監控（可選）`,energyMonitoringHint:`搜尋並選擇提供功率/能源資料的感測器。`,powerSensorW:`功率感測器（W）`,energyTodayKwh:`今日能源（kWh）`,totalEnergyKwh:`總能源（kWh）`,noMatchingSensors:`無匹配的感測器`,none:`無`,mqttNotConfigured:`MQTT代理未設定。請在以下位置設定代理地址`,mqttSettingsPath:`設定 → 網路 → MQTT發布`,mqttNotConfiguredSuffix:`（您不需要啟用發布，只需填寫代理詳細資訊）。`,mqttMonitorOnlyDescription:`MQTT插座透過MQTT訂閱接收功率/能源資料。開關控制不可用 - 請使用您的MQTT代理或家庭自動化系統。`,powerMonitoring:`功率監控`,energyMonitoring:`能源監控`,stateMonitoring:`狀態監控`,optional:`可選`,topic:`主題`,jsonPath:`JSON路徑`,multiplier:`乘數`,onValue:`ON值`,mqttPowerHint:`JSON路徑從JSON負載中提取值（例如"power_l1"）。如果主題發布原始數值，請留空。
+ON值：表示"ON"的确切字符串。留空以自动检测（ON、true、1）。`,restControl:`控制`,restOnUrl:`开启 URL`,restOffUrl:`关闭 URL`,restOnBody:`开启请求体`,restOffBody:`关闭请求体`,restMethod:`HTTP 方法`,restHeaders:`Custom Headers (JSON)`,restStatusUrl:`状态 URL`,restStatusPath:`状态 JSON 路径`,restStatusOnValue:`开启值`,restPowerUrl:`功率URL`,restPowerPath:`功率 JSON 路径`,restPowerMultiplier:`功率乘数`,restEnergyUrl:`能耗URL`,restEnergyPath:`能耗 JSON 路径（今日）`,restEnergyTotalPath:`能耗 JSON 路径（累计值）`,restEnergyTotalMultiplier:`累计值倍数`,restEnergyTotalPathHint:`例如 aenergy.total`,restEnergyTotalHint:`许多插座（包括所有 Shelly）只提供永不归零的累计计数值。该值应填在此处，而不是上面的字段：若当作今日用量读取，它在午夜不会归零，而“昨日”和“总计”会一直为空。Bambuddy 会据此推算“今日”和“昨日”，这需要一到两天的采样数据。Shelly 以瓦时为单位，因此倍数请填 0.001。`,restEnergyMultiplier:`能耗乘数`,restUrlRequired:`REST 插座至少需要一个 URL（ON 或 OFF）`,restHeadersHint:`例如 {"Authorization": "Bearer your-token"}`,restBodyHint:`例如 ON, {"state": "on"}`,restStatusHint:`轮询当前状态的 URL`,restPathHint:`例如 state 或 data.power.status`,restPowerUrlHint:`功率数据的独立URL（留空则使用状态URL）`,restEnergyUrlHint:`能耗数据的独立URL（留空则使用状态URL）`,restEnergyHint:`每个值可以使用独立的URL，或回退到状态URL。使用乘数进行单位转换（例如：0.001 将 Wh 转换为 kWh）。`,testConnection:`测试连接`,connectionSuccess:`连接成功`,noSwitchesInSwitchbar:`开关栏中没有开关`,enableSwitchbarHint:`在设置 > 智能插座中启用"在开关栏显示"`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`电子邮件`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`SMTP 电子邮件通知`,telegram:`通过 Telegram 机器人发送通知`,discord:`通过 Webhook 发送到 Discord 频道`,ntfy:`免费、可自托管的推送通知`,pushover:`简单、可靠的推送通知`,callmebot:`通过 CallMeBot 免费发送 WhatsApp 通知`,webhook:`通用 HTTP POST 到任意 URL`,homeassistant:`Home Assistant 仪表板中的持久通知`,bark:`通过 Bark 推送 iOS 通知（可自建服务器）`},lastSuccess:`上次：{{date}}`,error:`错误`,printer:`打印机：`,allPrinters:`所有打印机`,sendTestNotification:`发送测试通知`,eventSettings:`事件设置`,enabled:`已启用`,sendFromProvider:`从此提供商发送通知`,printEvents:`打印事件`,printerStatus:`打印机状态`,amsAlarms:`AMS 警报`,amsHtAlarms:`AMS-HT 警报`,printQueue:`打印队列`,start:`开始`,plateCheck:`热床检测`,complete:`完成`,failed:`失败`,stopped:`已停止`,progress:`进度`,offline:`离线`,lowFilament:`耗材不足`,maintenance:`维护`,amsHumidity:`AMS 湿度`,amsTemp:`AMS 温度`,amsDryingSuspended:`干燥已暂停`,amsHtHumidity:`AMS-HT 湿度`,amsHtTemp:`AMS-HT 温度`,bedCooled:`热床已冷却`,firstLayer:`首层完成`,quiet:`免打扰`,digest:`摘要 {{time}}`,printStarted:`打印已开始`,plateNotEmpty:`热床非空`,plateNotEmptyDescription:`打印前检测到物体`,plateClearRequired:`需要确认热床已清空`,plateClearRequiredDescription:`打印完成，队列等待热床确认`,plateClear:`热床确认`,printCompleted:`打印已完成`,bedCooledLabel:`热床已冷却`,bedCooledDescription:`打印后热床温度降至阈值以下`,firstLayerCompleteLabel:`首层打印完成`,firstLayerCompleteDescription:`首层完成时发送带照片的通知`,missingSpoolAssignmentLabel:`缺少料卷分配`,billingChargeFailedLabel:`计费失败`,billingChargeFailedDescription:`无法记录打印费用时通知`,missingSpoolAssignmentDescription:`当打印开始且所需料盘没有分配料卷时发送通知`,printFailed:`打印失败`,printStopped:`打印已停止`,progressMilestones:`进度里程碑`,progressMilestonesDescription:`在 25%、50%、75% 时通知`,printerOffline:`打印机离线`,printerError:`打印机错误`,aiFailureDetection:`AI 失败检测`,aiFailureDetectionDescription:`当 Obico AI 检测到可能的打印失败时通知`,lowFilamentLabel:`耗材不足`,maintenanceDue:`需要维护`,maintenanceDueDescription:`需要维护时通知`,amsHumidityHigh:`AMS 湿度过高`,amsHumidityHighDescription:`普通 AMS 湿度超过阈值`,amsTemperatureHigh:`AMS 温度过高`,amsTemperatureHighDescription:`普通 AMS 温度超过阈值`,amsDryingSuspendedTitle:`自动干燥已暂停`,amsDryingSuspendedDescription:`湿度始终未降到阈值以下，已放弃对某个 AMS 单元的自动干燥`,amsHtHumidityHigh:`AMS-HT 湿度过高`,amsHtHumidityHighDescription:`AMS-HT 湿度超过阈值`,amsHtTemperatureHigh:`AMS-HT 温度过高`,amsHtTemperatureHighDescription:`AMS-HT 温度超过阈值`,inventoryAlerts:`库存警报`,stockReorderAlert:`补货警报`,stockReorderAlertDescription:`SKU 已达到补货点`,stockBreakAlert:`断货警报`,stockBreakAlertDescription:`库存将在补货到达前耗尽`,jobAdded:`任务已添加`,jobAddedDescription:`任务已添加到队列`,jobAssigned:`任务已分配`,jobAssignedDescription:`基于模型的任务已分配给打印机`,jobStarted:`任务已开始`,jobStartedDescription:`队列任务已开始打印`,jobWaiting:`任务等待中`,jobWaitingDescription:`任务正在等待耗材或打印机`,jobSkipped:`任务已跳过`,jobSkippedDescription:`任务已跳过（上一个失败）`,jobFailed:`任务失败`,jobFailedDescription:`任务启动失败`,queueComplete:`队列已完成`,queueCompleteDescription:`所有队列任务已完成`,quietHours:`免打扰时段`,noNotificationsDuring:`在此时段内不发送通知`,editProviderToChangeQuietHours:`编辑提供商以更改免打扰时段`,dailyDigest:`每日摘要`,batchNotifications:`将通知汇总为每日摘要`,sendAt:`发送于 {{time}}`,editProviderToChangeDigestTime:`编辑提供商以更改摘要时间`,edit:`编辑`,deleteProvider:`删除通知提供商`,deleteConfirm:`确定要删除"{{name}}"吗？此操作无法撤销。`,delete:`删除`,addTitle:`添加通知提供商`,editTitle:`编辑通知提供商`,nameLabel:`名称 *`,namePlaceholder:`我的通知`,providerTypeLabel:`提供商类型 *`,configuration:`配置`,testConfiguration:`测试配置`,printerFilter:`打印机筛选`,onlyFromPrinter:`仅发送来自此打印机的事件通知`,quietHoursDnd:`免打扰时段`,quietStart:`开始`,quietEnd:`结束`,dailyDigestLabel:`每日摘要`,sendDigestAt:`发送摘要于`,digestCollected:`事件将被收集并在此时间作为单条摘要发送`,notificationEvents:`通知事件`,progressPercent:`（25%、50%、75%）`,bedCooledAfterPrint:`（打印完成后）`,haSensorAlert:`打印机传感器警报`,haSensorAlertDescription:`（已绑定的 Home Assistant 传感器需要关注）`,locationHaSensorAlert:`存放位置传感器警报`,locationHaSensorAlertDescription:`（绑定到存放位置的 Home Assistant 传感器需要关注）`,eventPriority:{sectionTitle:`ntfy 优先级`,helpNtfy:`为每个已启用的事件选择优先级。ntfy 使用它来升级提醒（声音、可见性、推送行为）。此处未设置的级别将使用 ntfy 服务器默认值。`,min:`最低`,low:`低`,default:`默认`,high:`高`,urgent:`紧急`},cancel:`取消`,save:`保存`,add:`添加`,nameRequired:`名称为必填项`,fieldRequired:`{{field}}为必填项`,haDataInvalid:`Data 字段必须是有效的 JSON 对象，例如 {"priority": "high", "ttl": 0}`,phoneNumber:`电话号码`,apiKey:`API 密钥`,serverUrl:`服务器 URL`,topic:`主题`,authToken:`认证令牌`,userKey:`用户密钥`,appToken:`应用令牌`,priority:`优先级`,pushoverRetry:`紧急重试 (秒)`,pushoverExpire:`紧急过期 (秒)`,botToken:`机器人令牌`,chatId:`聊天 ID`,telegramThreadId:`论坛话题 ID`,telegramThreadIdHelp:`可选。发送到论坛群组中的指定话题，即话题链接末尾的数字 (t.me/c/.../25)。留空则发送到常规话题。`,telegramThreadIdInvalid:`论坛话题 ID 必须是数字。`,smtpServer:`SMTP 服务器`,smtpPort:`SMTP 端口`,security:`安全`,authentication:`认证`,username:`用户名`,password:`密码`,fromEmail:`发件人邮箱`,toEmail:`收件人邮箱`,webhookUrl:`Webhook URL`,payloadFormat:`负载格式`,authorization:`授权`,titleFieldName:`标题字段名`,messageFieldName:`消息字段名`,editTemplate:`编辑模板：{{name}}`,titleLabel:`标题`,bodyLabel:`正文`,titlePlaceholder:`通知标题...`,bodyPlaceholder:`通知正文...`,availableVariables:`可用变量`,clickToInsert:`点击插入到正文光标位置`,livePreview:`实时预览`,hide:`隐藏`,show:`显示`,loadingPreview:`加载预览中...`,enterTemplateContent:`输入模板内容以查看预览`,titlePreview:`标题：`,bodyPreview:`正文：`,resetToDefault:`恢复默认`,titleRequired:`标题为必填项`,bodyRequired:`正文为必填项`,notificationLog:`通知日志`,showFailedOnly:`仅显示失败`,last24Hours:`最近 24 小时`,last7Days:`最近 7 天`,last30Days:`最近 30 天`,last90Days:`最近 90 天`,justNow:`刚刚`,noFailedNotifications:`没有失败的通知`,noNotificationsLogged:`没有通知记录`,unknownProvider:`未知提供商`,logTitle:`标题`,logMessage:`消息`,logError:`错误`,logProvider:`提供商：{{type}}`,logTime:`时间：{{time}}`,refresh:`刷新`,clearOld:`清除旧记录`,statsSummary:`最近 {{days}} 天：`,statsNotifications:`条通知`,statsSent:`{{count}} 条已发送`,statsFailed:`{{count}} 条失败`,eventTypes:{print_start:`打印已开始`,print_complete:`打印完成`,print_failed:`打印失败`,print_stopped:`打印已停止`,print_progress:`进度`,printer_offline:`打印机离线`,printer_error:`打印机错误`,filament_low:`耗材不足`,maintenance_due:`需要维护`,test:`测试`},userEmail:{title:`通知`,emailNotifications:`邮件通知`,emailNotificationsDesc:`接收您自己打印任务的邮件通知。邮件将通过高级身份验证中配置的 SMTP 设置发送。`,sendingTo:`通知将发送至`,noEmailWarning:`您的账户没有邮件地址。请联系管理员添加。`,printJobNotifications:`打印任务通知`,printJobNotificationsDesc:`选择哪些事件会触发您提交的打印任务的邮件通知。`,printJobStarts:`打印任务开始`,printJobStartsDesc:`当您的打印任务开始时收到通知。`,printJobFinishes:`打印任务完成`,printJobFinishesDesc:`当您的打印任务成功完成时收到通知。`,printErrors:`打印错误`,printErrorsDesc:`当您的打印任务失败或遇到错误时收到通知。`,printJobStops:`打印任务停止`,printJobStopsDesc:`当您的打印任务被取消或停止时收到通知。`,saveSuccess:`通知偏好设置已保存。`,saveError:`保存通知偏好设置失败。`}},richTextEditor:{bold:`粗体`,italic:`斜体`,underline:`下划线`,bulletList:`无序列表`,numberedList:`有序列表`,alignLeft:`左对齐`,alignCenter:`居中对齐`,alignRight:`右对齐`,addLink:`添加链接`,removeLink:`移除链接`},externalLinks:{title:`侧边栏链接`,sidebarLayout:`侧边栏`,sidebarLayoutDescription:`显示或隐藏内置页面，添加外部链接，并拖动项目以重新排序侧边栏导航。`,systemPages:`Bambuddy 页面`,externalLinks:`外部链接`,visibleInSidebar:`在侧边栏中显示`,hiddenFromSidebar:`在侧边栏中隐藏`,requiredInSidebar:`侧边栏中必需`,hidePage:`隐藏页面`,showPage:`显示页面`,settingsCannotBeHidden:`设置不能隐藏`,noLinksConfigured:`未配置外部链接`,deleteLink:`删除链接`,removeCustomIcon:`移除自定义图标`,openInNewTab:`在新标签页中打开`,placeholders:{linkName:`我的链接`}},keyboardShortcuts:{title:`键盘快捷键`,navigation:`导航`,archivesSection:`归档`,kProfilesSection:`K 值配置`,generalSection:`通用`,shortcuts:{goToPrinters:`前往打印机`,goToArchives:`前往归档`,goToQueue:`前往队列`,goToStats:`前往统计`,goToProfiles:`前往云端配置`,goToSettings:`前往设置`,focusSearch:`聚焦搜索`,openUploadModal:`打开上传对话框`,clearSelection:`清除选择 / 取消焦点`,contextMenu:`卡片右键菜单`,refreshProfiles:`刷新配置`,newProfile:`新建配置`,exitSelectionMode:`退出选择模式`,showHelp:`显示此帮助`},footer:`按 Esc 或点击外部关闭`},notificationLog:{title:`通知日志`,events:{printStarted:`打印开始`,printComplete:`打印完成`,printFailed:`打印失败`,printStopped:`打印停止`,progress:`进度`,printerOffline:`打印机离线`,printerError:`打印机错误`,lowFilament:`耗材不足`,maintenanceDue:`维护到期`,test:`测试`},timeAgo:{justNow:`刚刚`,minutesAgo:`{{minutes}} 分钟前`,hoursAgo:`{{hours}} 小时前`}},restoreBackup:{title:`恢复备份`,restoring:`恢复中...`,restoreComplete:`恢复完成`,restoreFailed:`恢复失败`,importSettings:`从备份文件导入设置`,pleaseWait:`请稍候，正在恢复您的数据`,clickToSelect:`点击选择备份文件（.json 或 .zip）`,howDuplicateHandling:`重复处理方式：`,categories:{printers:`打印机`,smartPlugs:`智能插座`,notificationProviders:`通知提供商`,filaments:`耗材`,archives:`归档`,pendingUploads:`待处理上传`,settingsTemplates:`设置和模板`},matchingInfo:{printers:`按序列号匹配`,smartPlugs:`按 IP 地址匹配`,notificationProviders:`按名称匹配`,filaments:`按名称 + 类型 + 品牌匹配`,archives:`按内容哈希匹配`,pendingUploads:`按文件名匹配`,settingsTemplates:`始终覆盖`},replaceExisting:`替换现有数据`,keepExisting:`保留现有数据`,replaceDescription:`用备份数据覆盖已存在的项目`,keepDescription:`仅恢复不存在的项目`,caution:`注意：`,cautionText:`覆盖将用备份数据替换您当前的配置。出于安全考虑，打印机访问码永远不会被覆盖。`,itemsRestored:`已恢复项目`,itemsSkipped:`已跳过项目`,restored:`已恢复`,skipped:`已跳过（已存在）`,filesLabel:`文件（3MF、缩略图等）`,newApiKeysGenerated:`已生成新 API 密钥`,newApiKeysWarning:`这些密钥仅显示一次。请立即复制！`,processingBackup:`处理备份文件中...`,noDataFound:`备份文件中未找到可恢复的数据。`,failedToRestore:`恢复备份失败。请检查文件格式。`},backupExport:{title:`导出备份`,selectData:`选择要包含的数据`,selectAll:`全选`,selectNone:`全不选`,categoryDescriptions:{settings:`语言、主题、更新偏好`,notifications:`ntfy、Pushover、Discord 等`,templates:`自定义消息模板`,smartPlugs:`Tasmota 插座配置`,externalLinks:`侧边栏外部服务链接`,printers:`打印机信息（不含访问码）`,plateDetection:`空打印板参考图像`,filaments:`耗材类型和成本`,maintenance:`自定义维护计划`,archives:`所有打印数据 + 文件（3MF、缩略图、照片）`,projects:`项目、材料清单和附件`,pendingUploads:`虚拟打印机待审核的上传`,apiKeys:`Webhook API 密钥（导入时生成新密钥）`},requiresPrinters:`需要选择打印机`,zipFileWarning:`将创建 ZIP 文件。`,zipFileDescription:`包括所有 3MF 文件、缩略图、延时摄影和照片。这可能需要一些时间并生成较大的文件。`,includeAccessCodes:`包含访问码`,includeAccessCodesDescription:`用于转移到另一台机器`,includeAccessCodesWarning:`访问码将以明文形式包含。请妥善保管此备份文件！`,categoriesSelected:`已选择 {{selectedCount}} 个类别`},pendingUploads:{placeholders:{notes:`添加关于此打印的备注...`},discardUpload:`丢弃上传`,archiveAllUploads:`归档所有上传`,discardAllUploads:`丢弃所有上传`,archive:`归档`,timeAgo:{justNow:`刚刚`,minutesAgo:`{{minutes}} 分钟前`,hoursAgo:`{{hours}} 小时前`,daysAgo:`{{days}} 天前`}},apiBrowser:{placeholders:{requestBody:`JSON 请求体...`,searchEndpoints:`搜索端点...`}},configureAmsSlot:{title:`配置 AMS 槽位`,slotConfigured:`槽位已配置！`,configuringSlot:`正在配置槽位：`,slotLabel:`{{ams}} 槽位 {{slot}}`,searchPresets:`搜索预设...`,colorPlaceholder:`颜色名称或十六进制（例如：棕色、FF8800）`,clearCustomColor:`清除自定义颜色`,noCloudPresets:`无云端预设。登录拓竹云以同步。`,noPresetsAvailable:`无可用预设。登录拓竹云或导入本地配置。`,noMatchingPresets:`未找到匹配的预设。`,custom:`自定义`,builtin:`内置`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`设置已发送到打印机`,filamentProfile:`耗材配置`,kProfileLabel:`K 值配置（压力推进）`,filteringFor:`筛选：{{material}}`,noKProfile:`无 K 值配置（使用默认值 0.020）`,noMatchingKProfiles:`未找到匹配的 K 值配置。将使用默认 K=0.020。`,otherKProfiles:`此打印机上的其他 K 值配置`,selectFilamentFirst:`请先选择耗材配置`,kFromCalibration:`K={{value}}（来自打印机校准）`,customColorLabel:`自定义颜色（可选）`,presetColors:`{{name}} 颜色：`,showLessColors:`显示更少颜色`,showMoreColors:`显示更多颜色`,clear:`清除`,hexLabel:`十六进制：#{{hex}}`,resetting:`重置中...`,resetSlot:`重置槽位`,cancel:`取消`,configuring:`配置中...`,configureSlot:`配置槽位`},githubBackup:{title:`Git 备份`,history:`历史`,downloadBackup:`下载备份`,restoreBackup:`恢复备份`,noBackupsYet:`暂无备份`},emailSettings:{placeholders:{fromName:`Bambuddy`}},tagManagement:{searchTags:`搜索标签...`,renameTag:`重命名标签`,deleteTag:`删除标签`},notificationTemplates:{placeholders:{title:`通知标题...`,body:`通知正文...`}},batchTag:{placeholders:{newTag:`输入新标签...`}},photoGallery:{deletePhoto:`删除照片`},filamentHoverCard:{copySpoolUuid:`复制耗材 UUID`},kProfilesView:{hasNote:`有备注`,copyProfile:`复制配置`},layout:{openMenu:`打开菜单`,noPermissionSystemInfo:`您没有查看系统信息的权限`},dashboard:{dragToReorder:`拖动以重新排列`,hideWidget:`隐藏小部件`},notificationProviderCard:{deleteNotificationProvider:`删除通知提供商`},fileManagerModal:{closeFileManager:`关闭文件管理器`,sortFiles:`排序文件`,goToParentFolder:`返回上级文件夹`,threeView:`3D 视图`},embeddedCameraViewer:{refreshStream:`刷新流`,close:`关闭`,zoomOut:`缩小`,resetZoom:`重置缩放`,zoomIn:`放大`,dragToResize:`拖动调整大小`},timelapseViewer:{skipBack5s:`后退 5 秒`,skipForward5s:`前进 5 秒`},notificationProviders:{descriptions:{email:`SMTP 邮件通知`,telegram:`通过 Telegram 机器人通知`,discord:`通过 Webhook 发送到 Discord 频道`,ntfy:`免费、可自托管的推送通知`,pushover:`简单、可靠的推送通知`,callmebot:`通过 CallMeBot 的免费 WhatsApp 通知`,webhook:`通用 HTTP POST 到任意 URL`}},logViewer:{searchPlaceholder:`搜索消息或日志名称...`,noLogEntries:`未找到日志条目`},switchbarPopover:{noSwitchesInSwitchbar:`切换栏中没有开关`},projectPageModal:{placeholders:{title:`标题`,designer:`设计师`,license:`许可证`,description:`输入描述...`,profileTitle:`配置标题`,profileDescription:`配置描述...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`等待中`,justNow:`刚刚`,now:`现在`,minsAgo:`{{count}} 分钟前`,inMins:`{{count}} 分钟后`,hoursAgo:`{{count}} 小时前`,inHours:`{{count}} 小时后`,daysAgo:`{{count}} 天前`,inDays:`{{count}} 天后`},spoolbuddy:{nav:{dashboard:`仪表板`,ams:`AMS`,inventory:`库存`,writeTag:`写入`,settings:`设置`},status:{nfcReady:`NFC 就绪`,nfcOff:`NFC 关闭`,offline:`离线`,online:`在线`,noPrinters:`无打印机`,deviceOffline:`设备离线`,waitingConnection:`等待设备连接...`,systemReady:`系统就绪`,status:`状态`},dashboard:{readyToScan:`准备扫描`,idleMessage:`将耗材放在秤上以识别`,nfcHint:`NFC 标签将自动读取`,device:`设备`,syncWeight:`同步重量`,weightSynced:`已同步！`,unknownTag:`未知标签`,newTag:`检测到新标签`,onScale:`在秤上`,linkSpool:`链接到耗材`,linkTagTitle:`将标签链接到耗材`,linkTag:`链接标签`,selectSpool:`选择要链接此标签的耗材：`,noUntagged:`未找到没有标签的耗材`,tagDetected:`检测到标签`,noTag:`无标签`,tagId:`标签`,grossWeight:`毛重`,spoolSize:`耗材盘尺寸`,close:`关闭`,currentSpool:`当前耗材`,plateReady:`热床就绪: {{name}}`,plateReadyLabel:`待清理的热床`,plateClearAction:`清理`,plateClearedToast:`已将热床标记为已清理`,plateClearFailed:`无法将热床标记为已清理`},modal:{spoolDetected:`检测到耗材`,assignToAms:`分配到 AMS`,syncWeight:`同步重量`,weightSynced:`已同步！`,syncing:`同步中...`,newTagDetected:`检测到新标签`,addToInventory:`添加到库存`,assignToAmsTitle:`分配到 AMS`,selectSlot:`选择槽位`,assign:`分配`,assigning:`分配中...`,assignSuccess:`已分配！`,assignPendingInsert:`已分配。插入耗材后将配置槽位。`,assignError:`分配耗材失败。请重试。`,noPrinterSelected:`选择打印机...`,noAmsDetected:`此打印机未检测到 AMS`,slot:`槽位`},weight:{noReading:`无读数`,stable:`稳定`,measuring:`测量中...`,tare:`去皮`,calibrate:`校准`},spool:{remaining:`剩余`,material:`材料`,brand:`品牌`,color:`颜色`,coreWeight:`空盘`,labelWeight:`标签`,scaleWeight:`秤重`,netWeight:`净重`,lastUsed:`上次使用`,unknownColor:`未知颜色`},ams:{noData:`未检测到 AMS`,connectAms:`连接 AMS 以查看耗材槽位`,noPrinter:`未选择打印机`,selectPrinter:`从顶部栏选择打印机`,printerDisconnected:`打印机已断开`,humidity:`湿度`,level:`余量`,active:`活跃`,slot:`槽位`,empty:`空`},inventory:{search:`搜索耗材...`,empty:`库存中没有耗材`,noResults:`没有匹配的耗材`,spools:`个耗材`,addSpool:`添加耗材`},settings:{tabDevice:`设备`,tabDisplay:`显示`,tabScale:`秤`,tabUpdates:`更新`,nfcReader:`NFC 读卡器`,type:`类型`,connection:`连接`,notConnected:`不适用`,deviceInfo:`设备信息`,hostname:`主机`,uptime:`运行时间`,systemConfig:`后端与认证`,backendUrl:`Bambuddy 后端 URL`,apiToken:`API 令牌`,apiTokenPlaceholder:`输入 API 令牌`,saveConfig:`保存配置`,systemQueued:`配置已加入队列。`,nfcDiagnostic:`NFC 诊断`,scaleDiagnostic:`秤诊断`,readTagDiagnostic:`读取标签诊断`,testNfc:`测试读卡器`,testScale:`测试精度`,testReadTag:`读取标签`,systemFieldsRequired:`后端 URL 为必填项。`,brightness:`亮度`,saved:`已保存`,noBacklight:`未检测到 DSI 背光。亮度控制需要 DSI 显示屏。`,screenBlank:`屏幕熄灭超时`,screenBlankDesc:`不活动后屏幕关闭。触摸唤醒。`,displayNote:`亮度作为软件滤镜应用。`,scaleCalibration:`秤校准`,currentWeight:`当前重量`,tareOffset:`去皮`,calFactor:`系数`,knownWeight:`已知重量`,calStep1:`移除秤上所有物品并按设置零点。`,calStep2:`将已知重量放在秤上。`,setZero:`设置零点`,calibrateNow:`校准`,calibrated:`已校准`,tareSet:`去皮命令已发送。等待设备响应...`,tareComplete:`去皮完成！`,tareTimedOut:`去皮超时 — SpoolBuddy 守护进程是否正在运行？`,tareFailed:`发送去皮命令失败`,zeroSet:`零点已设置。将已知重量放在秤上。`,calibrationDone:`校准完成！`,calibrationFailed:`校准失败`,lastCalibrated:`上次校准`,stable:`稳定`,settling:`稳定中...`,firmware:`固件`,scale:`秤`,noDevice:`未找到 SpoolBuddy 设备`,daemonVersion:`守护进程版本`,currentVersion:`当前`,versionPending:`等待守护进程...`,checking:`检查中...`,checkUpdates:`检查更新`,updateAvailable:`有可用更新`,updateInstructions:`通过 SSH 更新：运行 SpoolBuddy 安装脚本进行升级。`,upToDate:`已是最新`,includeBeta:`包含测试版本`},writeTag:{tabExisting:`现有耗材`,tabNew:`新耗材`,tabReplace:`替换标签`,searchPlaceholder:`按材料、颜色、品牌搜索...`,noUntaggedSpools:`没有无标签的耗材`,noTaggedSpools:`没有有标签的耗材`,selectSpool:`选择一个耗材，然后将空白 NTAG 放在读卡器上`,placeTag:`将 NTAG 放在读卡器上`,tagReady:`检测到标签 — 准备写入`,writeTag:`写入标签`,replaceTag:`替换标签`,writing:`写入标签中...`,waiting:`等待 SpoolBuddy...`,writeSuccess:`标签写入成功！`,writeFailed:`写入失败`,queueFailed:`排队写入命令失败`,tryAgain:`重试`,cancel:`取消`,replaceWarning:`旧标签将被取消链接。新标签将替换它。`,deviceOffline:`SpoolBuddy 离线`,material:`材料`,colorName:`颜色名称`,color:`颜色`,brand:`品牌`,weight:`重量 (g)`,createSpool:`创建耗材`,creating:`创建中...`,spoolCreated:`耗材已创建！准备写入。`,createFailed:`创建耗材失败`,incompleteDataWarning:`已使用不完整的Spoolman数据写入标签`},quickMenu:{printerPower:`打印机电源`,systemControls:`系统`,restartDaemon:`重启守护进程`,restartBrowser:`重启浏览器`,reboot:`重启`,shutdown:`关机`,swipeToClose:`向下滑动关闭`,confirmTitle:`确认`,confirmShutdown:`确定要关闭SpoolBuddy吗？您需要物理访问才能重新开启。`,confirmReboot:`确定要重启SpoolBuddy吗？`,confirmRestartDaemon:`重启SpoolBuddy守护进程？NFC和秤将暂时不可用。`,confirmRestartBrowser:`重启kiosk浏览器？屏幕将短暂变黑。`,confirm:`确认`,confirmPlugOn:`开启 {{name}}？`,confirmPlugOff:`关闭 {{name}}？`,turnOn:`开启`,turnOff:`关闭`}},diagnostic:{modalTitle:`连接诊断 — {{name}}`,running:`正在运行诊断...`,runningElapsed:`正在运行诊断... ({{elapsed}}秒)`,waitingForReportHint:`正在等待打印机发布状态报告 — 最长可能需要 {{max}} 秒。`,runFailed:`无法运行诊断：{{error}}`,retry:`重新运行`,runButton:`运行诊断`,sectionTitle:`连接诊断`,sectionDescription:`检查打印机无法连接或无法打印的原因 — 端口可达性、LAN 开发者模式、Docker 网络模式和凭据。`,noPrinters:`未配置打印机。`,overall:{ok:`未发现问题 — 打印机连接看起来正常。`,warnings:`打印机应该可以工作，但有些事项需要注意。`,problems:`发现了可解释打印机无法连接或无法打印的问题。`},check:{port_mqtt:{title:`控制端口（MQTT 8883）`,pass:`可达 — 打印机正在接受控制连接。`,fail:`端口 8883 不可达。打印机已关机、IP 地址不同，或被防火墙阻止。请核实打印机 IP，并确保没有任何东西阻止端口 8883。`},port_ftps:{title:`文件传输端口（FTPS 990）`,pass:`可达 — 发送打印文件将正常工作。`,warn:`端口 990 不可达。监控可能仍然有效，但向打印机发送打印任务将失败。请确保端口 990 未被阻止。`,warn_no_tls:`端口 990 已开放，但打印机的文件服务未能完成 TLS 握手。无法获取打印文件、封面图和延时视频，因此归档会保持为空。请重启打印机 — 解除端口封锁无济于事。`},external_storage:{title:`将发送的文件存储在外部存储中（安装步骤 4）`,pass:`打印机报告此选项已开启 — 发送的文件将存储在 SD 卡上，归档将包含缩略图和切片机元数据。`,fail:`打印机报告此选项已关闭。请启用"将发送的文件存储在外部存储中" — 在较新固件 (P2S 01.02 / Bambu Studio 2.6+) 中，开关位于打印机的打印设置中；在较旧版本中位于 Bambu Studio / OrcaSlicer 的设备选项卡中。如果不启用此选项，每次归档的打印都将没有缩略图也没有切片机元数据。`,skip:`未检查 — 需要有效的 MQTT 连接。在该设置仅存在于切片机中的较旧切片机上，打印机不会报告此设置，因此即使选项已关闭，此检查也会通过 — 请手动验证安装步骤 4。`,skip_unsupported_model:`此型号有 SD 卡槽，但无法开启该选项 — 当前 P1 系列固件不会在 Bambu Studio 中显示此开关，且打印机没有屏幕。这里无需修复；在 Bambu Lab 通过固件添加支持之前，存档的打印可能缺少缩略图和切片元数据。`,fail_no_media:`该选项已开启，但打印机的插槽中未检测到存储卡或U盘，发送的文件无处存放。插入一个再打印一次 — 在此之前，每一次归档的打印都会缺少缩略图和切片元数据。`,warn_internal_storage:`该选项已开启且存储介质在位，但上一次打印仍进入了 Bambuddy 无法读取的打印机内部存储。在 H2 系列、P2S 和 X2D 上，无论此选项如何设置，Bambu Studio 的「打印」按钮总是发送到那里。打印会带着名称和时间归档，但没有缩略图和切片元数据。要获得完整归档，请从 Bambuddy 启动打印、改用 OrcaSlicer 切片，或在 Bambu Studio 中用「发送」选择「外部存储」后再启动打印。`,warn_internal_history:`该选项已开启，存储介质也在，但最近一次打印来自打印机里已有的文件 — 从它的屏幕重新打印、从 Handy 启动，或是先前发送过的文件。这个文件库位于 Bambuddy 读不到的内部存储中，而且任何设置都改变不了，因为那次打印根本没有发送过文件。它仍会带着名称和时间归档，但没有缩略图和切片元数据。要获得完整归档，请从 Bambuddy 启动打印，或从切片软件发送。`},port_rtsps:{title:`摄像头端口（{{protocol}} {{port}}）`,pass:`可达 — 摄像头视频流将正常工作。`,warn:`端口 {{port}} 不可达。实时摄像头视图将无法工作。这不影响打印。`},macos_local_network:{title:`macOS 本地网络权限`,pass:`macOS 已允许 Bambuddy 访问本地网络。`,warn_unsigned:`运行 Bambuddy 的 Python 没有代码签名，macOS 因此无法将本地网络权限绑定到任何身份，会静默丢弃所有到打印机的连接——既没有错误，也不会弹出授权提示。请运行会完成签名的 Bambuddy 更新脚本 (install/update_macos.sh)，然后重启 Bambuddy。解释器：{{executable}}`,warn_permission:`如果打印机已开机并可通过该地址访问，请打开 系统设置 > 隐私与安全性 > 本地网络，确认 Bambuddy 使用的 Python 已启用。未启用时 macOS 会静默丢弃本地连接，而且升级 Python 可能不会保留原有授权。`},network_mode:{title:`容器网络模式`,genericRuntime:`容器`,pass:`正在 {{runtime}} 中以 host 网络运行。`,warn:`Bambuddy 正在 {{runtime}} 中以 bridge 网络运行。打印机发现和虚拟打印机需要 host 网络 — 请使用 host 网络重新创建容器（docker-compose 中为 "network_mode: host"，Podman 中为 "--network=host"）。`,skip:`未在容器中运行 — 不适用。`,skip_unknown:`Bambuddy 正在 {{runtime}} 中运行，但无法确定其网络模式。如果打印机发现或虚拟打印机无法使用，请使用 host 网络重新创建容器。`,skip_system_container:`Bambuddy 正在 {{runtime}} 系统容器中运行，它像虚拟机一样直接位于局域网中 — 不适用。`},subnet:{title:`网络子网`,pass:`打印机和 Bambuddy 位于同一子网。`,warn:`打印机（{{printer_ip}}）和 Bambuddy（{{host_ip}}）位于不同的子网。除非配置了子网之间的路由，否则它们可能无法相互访问。`,skip:`无法确定子网 — 已跳过。`},mqtt_auth:{title:`打印机凭据`,pass:`打印机已接受连接。`,fail:`打印机可达，但 Bambuddy 未与其建立连接。访问代码或序列号很可能有误 — 每次切换仅局域网模式或开发者模式时访问代码都会更改，请从打印机屏幕重新复制。正在重启或已达到同时连接数上限的打印机看起来也是这样。`,fail_auth_rejected:`打印机拒绝了 Bambuddy 的凭据。访问代码或序列号有误 — 每次切换仅局域网模式或开发者模式时访问代码都会更改。请从打印机屏幕重新复制，并保存到打印机设置中。`,skip:`未检查 — 无法连接到打印机。`},developer_mode:{title:`LAN 开发者模式`,pass:`开发者模式已启用。`,fail:`打印机上的开发者模式已关闭。请在打印机的 LAN 设置中启用它 — 并按 OK 确认。否则打印将无法开始。`,skip:`无法检查 — 需要与打印机的实时连接。`},printer_publishing:{title:`打印机正在发布状态`,pass:`打印机正在发布状态更新 — AMS、耗材和 K 配置将正确镜像到切片软件。`,fail:`MQTT 代理已接受连接，但打印机未发布任何状态报告。这几乎总是因为序列号错误或大小写不一致 — device/<serial>/report 主题区分大小写。请将打印机设置中的序列号与打印机屏幕上的显示进行核对。`,skip:`无法检查 — 需要与打印机的实时连接。`}}},systemHealth:{sectionTitle:`系统健康`,sectionDescription:`扫描最近的日志以发现已知问题，在它们演变成支持工单之前，通常你可以自行解决。`,rescan:`重新扫描`,clean:`在最近 {{times}} 条日志中未发现已知问题。`,logUnavailable:`文件日志记录已禁用，因此无法扫描日志。请启用文件日志以使用此检查。`,learnMore:`如何解决`,fixLabel:`解决方法：`,occurrences:`出现 {{times}} 次 — 最近一次 {{lastSeen}}`,category:{layer8:`你可以自行解决`,environment:`环境`,bug:`请反馈此问题`},signature:{"ftp-auth-rejected":{name:`打印机拒绝了访问码`,cause:`打印机拒绝了文件传输登录。访问码错误，或在切换开发者模式后已更改。`,fix:`从打印机屏幕（局域网设置）重新复制访问码，并在 Bambuddy 的打印机设置中更新它。`},"ftp-connection-timeout":{name:`文件传输连接超时`,cause:`Bambuddy 无法连接打印机的文件传输端口（FTPS 990）。该端口被阻止，或打印机已关机或位于其他子网。`,fix:`请确保 Bambuddy 与打印机之间的 990 端口未被阻止，并且两者位于同一网络。`},"ftp-ssl-error":{name:`安全文件传输握手失败`,cause:`打印机的文件服务在 990 端口上没有使用 TLS 响应。其文件服务器已卡死，这是打印机侧的故障，与防火墙或固件无关。`,fix:`请重启打印机。在此之前无法获取打印文件、封面图和延时视频；打印本身不受影响。`},"bambu-cloud-captcha":{name:`Bambu Cloud 要求进行 CAPTCHA 验证`,cause:`Bambu 的防滥用机制正在验证此网络，因此无法完成 Bambu Cloud 登录。这与公网 IP 地址有关，与你的账号或此安装无关。`,fix:`请等待：通常几小时后会自动解除，反复登录只会延长时间。在此期间，可使用从浏览器会话中获取的访问令牌登录。`},"mqtt-connection-flapping":{name:`打印机连接反复断开`,cause:`控制连接（MQTT 8883）反复断开并重连——通常是网络信号弱或端口被部分阻止所致。`,fix:`请检查打印机附近的 Wi-Fi 信号，尽量使用有线连接，并确保 8883 端口能够稳定连接。`},"camera-connection-refused":{name:`无法访问摄像头视频流`,cause:`无法在 RTSPS 322 端口连接实时摄像头。该端口被阻止，或打印机上的摄像头或局域网实时画面已关闭。`,fix:`请在打印机上启用摄像头和局域网实时画面，并确保 322 端口未被阻止。这不会影响打印。`},"database-locked":{name:`数据库写入冲突`,cause:`在负载下 SQLite 数据库出现 "database is locked" 错误——同时使用多台打印机时较为常见。`,fix:`请将 Bambuddy 切换到外部 PostgreSQL 数据库。参见文档中的 PostgreSQL 指南。`}}},vpDiagnostic:{title:`设置检查 — {{name}}`,runButton:`运行设置检查`,running:`正在运行设置检查...`,runFailed:`无法运行设置检查：{{error}}`,retry:`重新运行`,overall:{ok:`所有检查均已通过 — 此虚拟打印机已正确设置。`,warnings:`虚拟打印机应该可以工作，但有些方面需要注意。`,problems:`发现的问题可以解释切片软件为何无法看到或使用此虚拟打印机。`},check:{enabled:{title:`虚拟打印机已启用`,fail:`此虚拟打印机已关闭。请将其打开以使其可被发现。`},running:{title:`服务正在运行`,fail:`虚拟打印机已启用，但其服务未运行。请检查 Bambuddy 日志 — 通常是绑定 IP 冲突或权限错误使其停止。`},bind_interface:{title:`绑定网络接口`,fail:`绑定接口未设置，或在此主机上已不存在。请在"绑定接口"下拉菜单中选择一个当前的接口。`},access_code:{title:`已设置访问码`,fail:`未设置访问码。必须向切片软件提供与您在此处设置的相同的 8 位访问码。`},target_printer:{title:`目标打印机`,fail:`未选择目标打印机。代理模式需要一台实际的打印机进行转发。`,warn:`目标打印机当前处于离线状态 — 重新连接后将恢复转发。`},port_ftps:{title:`文件上传服务（端口 {{port}}）`,fail:`绑定 IP 的端口 {{port}} 上没有任何监听，因此切片软件无法上传文件。通常是此接口上的端口冲突所致。`},port_mqtt:{title:`控制服务（端口 {{port}}）`,fail:`绑定 IP 的端口 {{port}} 上没有任何监听，因此切片软件无法连接或显示状态。`},port_bind:{title:`发现服务（端口 {{port}}）`,fail:`绑定 IP 的端口 {{port}} 上没有任何监听，因此切片软件的发现握手会失败。`},privileged_ports:{title:`特权端口绑定`,fail:`端口 {{port}} 低于 1024，而此服务没有绑定它的权限，这正是上面没有任何监听的原因。请在 /etc/systemd/system/bambuddy.service 中添加 AmbientCapabilities=CAP_NET_BIND_SERVICE 并重启，或运行 "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))"。使用 Docker 时请添加 cap_add: [NET_BIND_SERVICE]。`},certificate:{title:`TLS 证书`,pass:`证书已就绪。请确保已将 Bambuddy CA 证书（上方）导入切片软件的信任库。`,fail:`此虚拟打印机的 TLS 证书缺失。请检查 Bambuddy 数据目录是否可写。`}}},bugReport:{logHealthSummary:`在你的日志中发现了已知问题`,logHealthIntro:`最近的日志与已知问题相符。请查看下方的解决方法——解决它们可能无需提交错误报告即可解决你的问题。你仍然可以在下方提交报告。`,title:`报告错误`,description:`描述`,descriptionPlaceholder:`出了什么问题？请描述问题...`,email:`邮箱（可选）`,emailPlaceholder:`your@email.com`,emailPrivacy:`如果提供，您的邮箱将包含在GitHub Issue的折叠部分中，以便维护者后续跟进。`,screenshot:`截图`,uploadOrPaste:`上传、粘贴或拖拽图片`,dataCollectedSummary:`报告中包含哪些数据？`,dataIncluded:`包含：`,dataIncludedList:`应用版本、操作系统、架构、Python版本、数据库统计（仅计数）、打印机型号、喷嘴数量、固件版本、连接状态、集成状态（Spoolman、MQTT、HA）、非敏感设置、网络接口数量、Docker详情、依赖版本。`,dataNeverIncluded:`绝不包含：`,dataNeverIncludedList:`打印机名称、序列号、访问代码、密码、IP地址、邮箱地址、API密钥、令牌、Webhook URL、主机名或用户名。`,submit:`提交`,startLogging:`开始调试日志`,stepEnableLogging:`调试日志已启用`,stepReproduce:`请现在重现问题`,stepStopLogging:`停止并提交报告`,stopAndSubmit:`停止并提交`,maxDuration:`{{minutes}}分钟后自动停止`,stoppingLogs:`正在收集日志并提交...`,submitting:`正在提交错误报告...`,submittingStepConnection:`正在执行打印机连接性检查`,submittingStepVirtualPrinters:`正在执行虚拟打印机设置检查`,submittingStepLogScan:`正在扫描最近的日志以查找已知问题`,submittingStepSubmit:`正在将报告提交至 GitHub`,submitSuccess:`错误报告提交成功！`,submitFailed:`提交错误报告失败`,diagnosticChecking:`正在检查打印机连接...`,diagnosticHealthy:`连接检查通过 — 未在您的打印机上发现问题。`,diagnosticSummary:`{{total}} 台打印机中有 {{problems}} 台存在连接问题`,diagnosticIntro:`一台或多台打印机存在连接问题，可能正是您遇到问题的原因。请展开下方的打印机查看解决方法 — 解决它也许无需提交错误报告即可解决问题。您仍然可以在下方提交报告。`,thankYou:`谢谢！`,submitted:`您的错误报告已提交。`,viewIssue:`查看Issue`,closeKeepsRecording:`重现问题时可以关闭此面板——记录会继续进行，重新打开后会回到这一步。`,resumeRecording:`错误报告记录中 — {{elapsed}}。点击以完成。`,resumeReport:`继续报告`,unexpectedError:`发生了意外错误`},failureDetection:{title:`AI 故障检测`,description:`通过自托管的 Obico ML API 监控打印,并对检测到的故障自动采取行动。`,mlUrl:`Obico ML API 地址`,mlUrlHint:`您自托管的 Obico ml_api 容器的基础 URL(例如 http://192.168.1.10:3333)。`,mlToken:`ML API 令牌（可选）`,mlTokenPlaceholder:`如果服务器未设置 ML_API_TOKEN，请留空`,mlTokenHint:`必须与您的 Obico ml_api 容器的 ML_API_TOKEN 环境变量一致。如果容器未使用令牌，请留空。`,test:`测试`,testSuccess:`ML API 可访问且正常。`,testSuccessTokenUnknown:`ML API 可访问且正常。无法验证令牌。`,testFailed:`无法访问 ML API。`,sensitivity:`灵敏度`,sensitivityLow:`低(减少误报)`,sensitivityMedium:`中(平衡)`,sensitivityHigh:`高(更早检测,更多误报)`,sensitivityHint:`调整触发警告和故障的置信度阈值。`,action:`检测到故障时的操作`,actionNotify:`仅通知`,actionPause:`暂停打印`,actionPauseOff:`暂停并切断电源`,pollInterval:`检查间隔(秒)`,pollIntervalHint:`打印过程中每台打印机的检查频率。最小 5 秒,最大 120 秒。`,externalUrlMissing:`未设置外部 URL。`,externalUrlHint:`ML API 通过 URL 获取摄像头快照。请在通用设置中设置外部 URL，以便 ML API 容器可以访问 Bambuddy。`,perPrinterTitle:`监控的打印机`,perPrinterHint:`选择检测服务要监视哪些打印机。`,monitorAll:`监控所有已连接的打印机`,statusTitle:`状态`,serviceRunning:`服务运行中`,thresholds:`低 / 高阈值`,activePrinters:`活动打印`,noActivePrints:`当前没有正在进行的打印。`,historyTitle:`最近检测`,noHistory:`暂无检测记录。`},makerworld:{title:`MakerWorld`,description:`粘贴 MakerWorld 模型链接，即可直接在 Bambuddy 中导入并打印 —— 无需切换到 Bambu Handy 应用。`,pasteUrlHeader:`从 MakerWorld 导入`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… 或粘贴任意 MakerWorld 链接`,resolveButton:`解析`,signInRequiredTitle:`下载需要登录 Bambu Cloud`,signInRequiredBody:`您可以匿名浏览模型详情，但下载 3MF 文件需要 Bambu Cloud 账户。`,signInExpiredTitle:`Bambu Cloud 登录已过期`,signInExpiredBody:`您仍处于 Bambuddy 的登录状态，但 Bambu Lab 已不再接受已保存的令牌，因此下载会失败。请重新登录 Bambu Cloud。`,openCloudSettings:`打开云设置`,untitledModel:`无标题模型`,byCreator:`作者: {{name}}`,downloadsCount:`{{count}} 次下载`,licensePrefix:`许可协议`,alreadyImported:`已在资料库中`,openOnMakerworld:`在 MakerWorld 中打开`,alreadyInLibrary:`此模型已在您的资料库中 —— 可在文件管理器 → MakerWorld 中找到`,importSuccess:`已导入 {{filename}} —— 已保存到文件管理器 → MakerWorld`,platesHeader:`打印板 ({{count}})`,plateDefaultName:`打印板 {{n}}`,materialCount:`{{count}} 种耗材`,amsRequired:`需要 AMS`,slicedFor:`为 {{printer}} 切片`,alsoCompatible:`还标记为兼容：{{printers}}`,importToLibrary:`保存`,sliceIn:`保存并在 {{slicer}} 中切片`,disclaimer:`MakerWorld 集成使用由社区记录的 API 接口。Bambuddy 与 MakerWorld 或 Bambu Lab 没有从属或认可关系。`,lastImportSuccess:`已导入到您的资料库`,lastImportAlreadyInLibrary:`已存在于您的资料库中`,viewInLibrary:`在文件管理器中查看`,openInBambuStudio:`在 Bambu Studio 中打开`,openInOrcaSlicer:`在 OrcaSlicer 中打开`,importTo:`导入到文件管理器`,recentImportsHeader:`最近导入`,phaseResolving:`解析中`,phaseDownloading:`下载中`,folderAuto:`MakerWorld (默认)`,importAll:`全部导入`,importAllProgress:`正在导入 {{current}}/{{total}}`,openGallery:`打开图片库`,galleryPrev:`上一张`,galleryNext:`下一张`,deleteImport:`从资料库中移除`,importDeleting:`正在移除…`,importDeleted:`已从资料库中移除`,confirmDelete:`从资料库中移除 {{filename}}？本地文件将被删除，但可以从 MakerWorld 重新导入。`,errors:{resolveFailed:`无法解析该 MakerWorld 链接。`,downloadFailed:`下载失败。请重试。`,deleteFailed:`无法从资料库中移除文件。`}},gcodeViewer:{filamentSlot:`耗材 {{n}}`,loading:`正在读取走刀路径…`,loadFailed:`无法加载此文件的 G-code。`,showTravel:`空驶移动`,topLayer:`顶层`,bottomLayer:`底层`,noSource:`未指定要预览的文件。`,view:{filament:`耗材`,feature:`类型`,height:`高度`,width:`宽度`},feature:{wall:`墙体`,sparseInfill:`稀疏填充`,solidInfill:`实心填充`,bridge:`桥接 / 悬垂`,support:`支撑`,skirt:`裙边 / 边缘`,gapFill:`间隙填充`,ironing:`熨烫`,primeTower:`擦料塔`},back:`返回`,backToArchives:`返回打印归档`,backToFiles:`返回文件管理器`,plates:`板`,plateN:`板 {{n}}`},libraryTrash:{title:`回收站`,headerButton:`回收站`,headerTooltip:`查看已移至回收站的文件`,backToFiles:`返回文件管理器`,subtitleAdmin:`已删除的文件会在回收站保留 {{days}} 天，之后自动删除。此视图显示所有用户的回收站。`,subtitleUser:`已删除的文件会在回收站保留 {{days}} 天，之后自动删除。`,loading:`正在加载回收站…`,loadError:`无法加载回收站。`,empty:`回收站为空。`,summary:`{{count}} 个文件 · {{size}}`,emptyTrash:`清空回收站`,restore:`还原`,purgeNow:`立即删除`,autoPurgeIn:`将于 {{when}} 自动删除`,days:`天`,retentionLabel:`自动删除时间`,selectAll:`全选`,selectOne:`选择 {{filename}}`,selectionCount:`已选择 {{count}} 项`,bulkRestore:`还原所选`,bulkPurge:`删除所选`,col:{filename:`文件`,folder:`文件夹`,size:`大小`,deleted:`移入回收站`,autoPurge:`自动删除`,owner:`所有者`,actions:`操作`},confirm:{purgeTitle:`永久删除？`,purgeBody:`{{filename}} 将从磁盘中删除，无法恢复。`,emptyTitle:`清空回收站？`,emptyBody:`全部 {{count}} 个文件将从磁盘中删除。此操作无法撤消。`,bulkPurgeTitle:`永久删除所选文件？`,bulkPurgeBody:`所选的 {{count}} 个文件将从磁盘中删除，无法恢复。`,cta:`永久删除`},toast:{restored:`文件已还原。`,restoreFailed:`无法还原文件。`,purged:`文件已永久删除。`,purgeFailed:`无法删除文件。`,emptied:`已从回收站删除 {{count}} 个文件。`,emptyFailed:`无法清空回收站。`,retentionSaved:`自动删除已设置为 {{days}} 天。`,retentionFailed:`无法保存保留设置。`,bulkRestored:`已还原 {{count}} 个文件。`,bulkPurged:`已删除 {{count}} 个文件。`}},libraryPurge:{title:`清理旧文件`,headerButton:`清理旧文件`,headerTooltip:`批量将旧文件移至回收站`,description:`早于所选阈值的文件将被移至回收站。外部文件夹会被跳过。在自动删除之前，您可以从回收站还原文件。`,ageLabel:`移动早于以下天数的文件`,days:`天`,includeNeverPrinted:`包括从未打印过的文件`,effectsTitle:`点击清除时会发生什么`,effect1:`匹配的文件移至回收站 — 尚未从磁盘删除。`,effect2:`在保留期到期之前，您可以随时从回收站恢复。`,effect3:`保留期满后，回收站清理器将它们从磁盘永久删除。`,effect4:`外部（链接）文件夹中的文件将被跳过 — Bambuddy 从不删除不属于自己的字节。`,previewLoading:`正在检查匹配的文件数量…`,previewFailed:`无法预览清理结果。`,previewSummary:`{{count}} 个文件 · {{size}} 将被移至回收站`,andMore:`…还有 {{count}} 个`,warning:`文件将被软删除——在保留期结束前，您可以从回收站还原它们。`,confirmCta:`将 {{count}} 个移至回收站`,purging:`正在移至回收站…`,toast:{success:`已将 {{count}} 个文件移至回收站。`,failed:`无法清理文件。`}},libraryAutoPurge:{enableLabel:`自动清理旧文件`,enableDescription:`每天执行一次管理员清理。文件会先进入回收站——不会立即删除。`,ageLabel:`自动清理早于以下天数的文件`,ageDescription:`最少 7 天，最多 10 年。使用与手动「清理旧文件」按钮相同的时间规则。`,days:`天`,includeNeverPrinted:`包括从未打印过的文件`,saveFailed:`无法保存自动清理设置。`},archivePurge:{headerButton:`清除旧条目`,headerTooltip:`批量删除旧归档`,title:`清除旧归档`,description:`清除旧的打印历史。每个归档按其最近一次打印完成时间老化 — 重新打印归档会刷新其年龄，因此活跃工作永远不会被清除。`,ageLabel:`删除最近未打印的归档：`,days:`天`,effectsTitle:`点击清除时会发生什么`,effect1:`每个匹配的归档将从列表中隐藏，其磁盘文件（3MF、缩略图、延时摄影、源 3MF、F3D、照片）也将被删除。`,effect2:`数据库中的归档记录将被保留，因此 Quick Stats 仍可计入耗材、时间、成本和能耗的贡献 — 与单条删除的默认行为一致。`,effect3:`勾选下方"同时从统计中移除"可一并清除 Quick Stats 中的贡献（与单条删除选项等同）。该操作不可撤销。`,effect4:`重新打印归档会刷新其使用计时器，因此仍在使用的归档不会被清除。`,purgeStatsLabel:`同时从统计中移除`,purgeStatsHint:`从 Quick Stats（耗材、时间、成本、能耗）中移除匹配的归档。不勾选时，Quick Stats 保留所有贡献，仅文件从磁盘删除。`,previewLoading:`检查匹配的归档数量…`,previewFailed:`无法预览清除。`,previewSummary:`将移除 {{count}} 个归档 · {{size}}`,andMore:`…还有 {{count}} 个`,warning:`文件将从磁盘删除且无法恢复。继续前请下载或收藏您想保留的内容。`,confirmCta:`移除 {{count}} 个归档`,purging:`移除中…`,toast:{success:`已移除 {{count}} 个归档。`,failed:`无法清除归档。`}},archiveAutoPurge:{enableLabel:`自动清除旧归档`,enableDescription:`每天一次，将阈值内未打印的归档从列表中隐藏，并从磁盘中删除其文件。重新打印会重置计时器。`,ageLabel:`自动删除最近未打印的归档：`,ageDescription:`最少 7 天，最多 10 年。基于最近一次打印完成 — 重新打印会刷新年龄。删除 3MF、缩略图、延时摄影、源 3MF、F3D 和照片。`,days:`天`,purgeStatsLabel:`同时从统计中移除`,purgeStatsDescription:`启用后，每日清理任务还会将每个被清除的归档从 Quick Stats（耗材、时间、成本、能耗）中移除。默认关闭 — Quick Stats 保留贡献，仅文件从磁盘删除。`,runNow:`立即清除归档`,saveFailed:`无法保存自动清除设置。`},cameraTokens:{scope:{camera_stream:`摄像头视频流`,camwall:`摄像头墙`,overlay:`直播叠加层`},title:`摄像头 API 令牌`,navTitle:`摄像头 API 令牌`,description:`长期令牌，用于将摄像头视频流嵌入 Home Assistant、Frigate、自助展示屏或其他需要稳定网址的工具。权限范围在创建时选择，令牌可随时撤销。`,loading:`加载中…`,confirmRevoke:{title:`撤销此令牌？`,body:`使用「{{name}}」的任何设备将立即失去访问权限。此操作无法撤销。`,cancel:`取消`,confirm:`撤销`},create:{scopeLabel:`权限范围`,hintCameraStream:`摄像头视频流令牌只能获取摄像头视频流和快照。适用于 Home Assistant、Frigate 或任何嵌入单个摄像头的场景。`,hintCamWall:`摄像头墙令牌可在无需登录的屏幕上打开 /camwall，能看到每台打印机的名称和状态以及摄像头视频流，但看不到文件名、地址或访问码。`,hintOverlay:`直播叠加层令牌可在无需登录的屏幕上打开 /overlay/{printerId}——供 OBS 或任何直播使用。它能看到一台打印机的摄像头视频流以及实时打印状态，包括屏幕上显示的文件名，但看不到地址或访问码。`,title:`创建新令牌`,nameLabel:`令牌名称`,namePlaceholder:`例如 Home Assistant`,daysLabel:`过期天数`,submit:`创建`,hint:`最大有效期 365 天。令牌值仅在创建时显示一次 — 请立即复制。`},created:{camWallUrlTitle:`此屏幕的摄像头墙网址`,camWallUrlHint:`在屏幕上打开此网址。任何能看到该网址的人都能观看摄像头墙，请像对待钥匙一样对待它——撤销令牌即可切断该屏幕的访问。`,overlayUrlTitle:`用于 OBS 的叠加层网址`,overlayUrlHint:`在 OBS 中将其添加为“浏览器”源（Browser Source）。将 /overlay/1 中的数字改为您打印机的编号（可在“打印机”页面的网址中查看）。任何能看到该网址的人都能观看直播，请像对待钥匙一样对待它——撤销令牌即可切断访问。`,title:`令牌已创建 — 立即复制`,warning:`这是此令牌唯一一次可见。关闭此对话框后您将无法再次查看。`,copy:`复制`,dismiss:`我已保存`},list:{scope:`权限范围`,myTitle:`我的令牌`,allTitle:`所有用户（管理员视图）`,empty:`暂无令牌。`,name:`名称`,owner:`所有者`,prefix:`前缀`,created:`创建时间`,expires:`过期时间`,lastUsed:`最近使用`,revoke:`撤销`,expired:`已过期`},toast:{created:`令牌已创建`,createFailed:`创建令牌失败`,revoked:`令牌已撤销`,revokeFailed:`撤销令牌失败`,loadFailed:`加载令牌失败`,copied:`已复制到剪贴板`,copyFailed:`复制失败 — 手动选择并复制`}},forecast:{title:`库存预测`,noSpools:`未找到活跃的料卷。请将料卷添加到库存中以查看预测数据。`,noUsageData:`无可用使用数据 — 无法预测库存时间线。`,sku:`SKU`,material:`材料`,stock:`库存`,dailyRate:`消耗率`,daysLeft:`剩余天数`,emptyBy:`耗尽日期`,reorderBy:`补货截止日`,actions:`操作`,trend:`趋势`,estimated:`估算`,noData:`无数据`,timeframe:`时间范围`,chartTitle:`库存预测 — 前5种材料`,dashedLinesROP:`虚线 = 再订货点`,stockLevel:`库存量`,reorderPoint:`再订购点`,safetyMargin:`安全余量`,trendLegend:`趋势（基于历史，95%服务水平）`,estimatedLegend:`估算（重量差值）`,noDataLegend:`无数据`,ropLabel:`再订货点`,ssLabel:`安全库存`,safetyStockLegend:`安全库存`,stockArrivalLegend:`到货`,stockoutLegend:`断货`,alertCount_one:`{{count}}条警告`,alertCount_other:`{{count}}条警告`,order:`订购`,globalLeadTime:`全局交货期`,globalLeadTimeHint:`全局交货期下限 — 用于所有 SKU 的再订购点计算`,save:`保存`,cancel:`取消`,settingsSaved:`设置已保存`,failedSaveSettings:`保存设置失败`,globalLeadTimeSaved:`全局提前期已保存`,skuLeadTimeOverride:`SKU 交货期覆盖`,skuLeadTimeHint:`0 = 使用全局交货期。设置 >0 以覆盖此 SKU。`,safetyMarginLabel:`安全余量`,effectiveLeadTime:`有效交货期`,effectiveLeadTimeHint:`max(全局 {{global}}天, SKU {{sku}}天)`,reorderPointHint:`d̄ × LT + safety margin — 当库存降至此水平时下单`,safetyMarginHint:`统计安全库存 (z=1.65 × σ × √LT) + 用户自定义缓冲`,safetyMarginHintDays:`在统计安全库存基础上额外增加的缓冲。{{approx}}`,safetyMarginHintDaysApprox:` ≈ 按当前速率 {{g}}g。`,safetyMarginHintG:`在统计安全库存基础上增加的固定重量缓冲。{{approx}}`,safetyMarginHintGApprox:` ≈ 按当前速率 {{days}}天。`,individualSpools:`单个料卷`,labelWeight:`标注重量`,spoolCount_one:`{{count}}个线轴`,spoolCount_other:`{{count}}个线轴`,stockBreakRisk:`断货风险`,stockBreakBefore:`补货前库存断档`,stockBreakDetail:`剩余 {{days}} 天，交货期 {{lt}} 天。`,reorderNow:`立即补货`,reorderTriggerPassed:`触发日期 {{date}} 已过。`,shoppingList:`购物清单`,shoppingListItems_one:`（{{count}}项）`,shoppingListItems_other:`（{{count}}项）`,shoppingListEmpty:`购物清单为空。点击任意行的购物车图标以添加商品。`,addToCart:`添加到购物清单`,alertsSnoozed:`静音此SKU的提醒`,alertsEnabled:`启用此SKU的提醒`,addedToCart:`已添加到购物清单`,failedAddItem:`添加项目失败`,listView:`列表`,logisticsView:`物流`,qty:`数量`,weight:`重量`,leadTime:`交货期`,expectedRestock:`预计补货日期`,status:`状态`,note:`备注`,pending:`待处理`,purchased:`已购买`,received:`已收货`,markPurchased:`标记为已购买`,markReceived:`标记为已收货 — 将料卷添加到库存`,resetToPending:`重置为待处理`,remove:`移除`,clearAll:`清空`,downloadCsv:`CSV`,addToCartTitle:`添加到购物清单`,byQuantity:`按数量`,byDuration:`按时长`,numberOfSpools:`线轴数量`,lastHowManyDays:`需要持续多少天？`,noUsageQty:`无使用数据 — 数量已设为1。`,noteOptional:`备注（可选）`,notePlaceholder:`例如：用于项目X，紧急…`,addNSpools_one:`添加{{count}}个线轴`,addNSpools_other:`添加{{count}}个线轴`,onArrival:`到货时`,stockBreakIn:`{{days}} 天后断货。`,stockRunsOutBefore:`库存在 {{lt}} 天交货期结束前耗尽。`,atRate:`按 {{rate}}g/天的速度，您需要`,moreSpools_one:`再{{count}}个线轴`,moreSpools_other:`再{{count}}个线轴`,bridgeGap:`来弥补缺口。`,noReadAccess:`您没有查看库存预测的权限。`,noWriteAccess:`您没有修改预测设置的权限。`}}},"zh-TW":{translation:{nav:{printers:`印表機`,archives:`歸檔`,queue:`列印佇列`,stats:`統計`,profiles:`設定檔案`,maintenance:`維護`,projects:`專案`,finance:`財務`,inventory:`耗材`,files:`檔案管理器`,makerworld:`MakerWorld`,notifications:`通知`,settings:`設定`,system:`系統`,collapseSidebar:`收起側邊欄`,expandSidebar:`展開側邊欄`,update:`更新`,updateAvailable:`有可用更新：v{{version}}`,updateAvailableBanner:`版本 {{version}} 已發布！`,viewUpdate:`檢視更新`,viewOnGithub:`在 GitHub 上檢視`,keyboardShortcuts:`鍵盤快捷鍵 (?)`,switchToLight:`切換到淺色模式`,switchToDark:`切換到深色模式`,switchToSystem:`切換到系統模式`,smartSwitches:`智慧開關`,logout:`登出`,installApp:`安裝應用程式`,installAppSuccess:`Bambuddy 已安裝`},common:{plusNMore:`另 {{count}} 個`,save:`儲存`,saving:`儲存中...`,cancel:`取消`,delete:`刪除`,edit:`編輯`,add:`新增`,close:`關閉`,confirm:`確認`,loading:`載入中...`,error:`錯誤`,errorLoading:`載入錯誤`,retry:`重試`,success:`成功`,warning:`警告`,enabled:`已啟用`,disabled:`已停用`,yes:`是`,no:`否`,on:`開`,off:`關`,all:`全部`,none:`無`,search:`搜尋`,filter:`篩選`,sort:`排序`,refresh:`重新整理`,download:`下載`,upload:`上傳`,uploading:`上傳中...`,uploadFailed:`上傳失敗`,actions:`操作`,status:`狀態`,name:`名稱`,description:`描述`,date:`日期`,time:`時間`,hours:`小時`,minutes:`分鐘`,seconds:`秒`,days:`天`,enable:`啟用`,disable:`停用`,permissions:`權限`,noPrinters:`未設定印表機`,noData:`尚無資料`,linkNotFound:`未找到連結`,required:`必填`,optional:`可選`,dismiss:`關閉`,apply:`套用`,reset:`重設`,export:`匯出`,import:`匯入`,clear:`清除`,selectAll:`全選`,deselectAll:`取消全選`,noChange:`— 不更改 —`,unchanged:`未更改`,unassigned:`未分配`,unknown:`未知`,unknownError:`未知錯誤`,today:`今天`,tomorrow:`明天`,asap:`儘快`,overdue:`已逾期`,now:`現在`,collapse:`收起`,expand:`展開`,previous:`上一頁`,next:`下一頁`,viewArchive:`檢視歸檔`,viewInFileManager:`在檔案管理器中檢視`,addedBy:`由 {{username}} 新增`,prints:`次列印`,more:`還有 {{count}} 個`,ascending:`升序`,descending:`降序`,back:`返回`,copy:`複製`,copied:`已複製!`,printer:`印表機`,remove:`移除`,type:`類型`,print:`列印`,rename:`重新命名`,move:`移動`,create:`建立`,duplicate:`複製`,left:`左`,right:`右`,user:`使用者`,run:`執行`,running:`執行中...`},finance:{allTypes:`所有類型`,allCostCenters:`所有成本中心`,title:`財務`,subtitle:`錢包、個人交易和成本中心`,noAccess:`您沒有權限查看財務資料。`,personalView:`個人檢視`,adminView:`管理員檢視`,createCostCenter:`建立成本中心`,adjustWallet:`調整錢包`,addManualPrint:`新增手動列印`,manageMembers:`管理成本中心成員`,currentBalance:`個人餘額`,transactions:`交易`,personalTransactions:`個人交易`,costCenters:`成本中心`,availableForPrinting:`可用於列印分配`,costCenterName:`名稱`,budgetType:`預算類型`,monthlyBudget:`月度預算`,totalBudget:`總預算`,noBudget:`無預算`,create:`建立`,selectUser:`選擇使用者`,transactionType:`類型`,amount:`金額`,noCostCenter:`無成本中心`,descriptionOptional:`說明（可選）`,applyAdjustment:`套用調整`,memberCanPrint:`成員可以列印`,addMember:`新增成員`,canPrint:`可以列印`,noMembers:`未分配任何成員。`,editCostCenter:`編輯成本中心`,myCostCenters:`我的成本中心`,costCentersHint:`檢視預算限制並將成本保持在控制範圍內`,noCostCenters:`未找到成本中心。`,owner:`擁有者`,balance:`帳戶餘額`,unlimited:`無限制`,budgetPolicyHint:`帳戶餘額用於記錄成本。列印僅受所選成本中心預算限制；未設定預算時不受限制。`,budget:`預算`,shared:`共用`,cannotEditPrivateCostCenter:`無法在此處編輯私人成本中心`,recentTransactions:`最近的交易`,transactionsHint:`按類型和成本中心篩選，然後瀏覽頁面`,first:`首頁`,prev:`上一頁`,next:`下一頁`,last:`末頁`,pageNumberOf:`第 {{page}} 頁，共 {{total}} 頁`,noTransactions:`沒有可用的交易。`,noTransactionsForFilter:`沒有交易符合選定的篩選條件。`,costCenter:`成本中心`,balanceAfter:`調整後餘額`,userWithId:`使用者 #{{id}}`,partial:`部分`,editTransaction:`編輯交易`,selectCostCenter:`選擇成本中心...`,costCenterRequired:`請選擇一個成本中心`,amountExample:`例如 4.00`,manualAdjustmentExample:`例如 手動調整`,userRequired:`請選擇一個使用者`,amountInvalid:`金額必須是有效的數字`,createdCostCenter:`成本中心已建立`,createCostCenterFailed:`建立成本中心失敗`,transactionDeleted:`交易已刪除`,deleteTransactionFailed:`刪除交易失敗`,transactionEdited:`交易已更新，帳本已重新計算`,editTransactionFailed:`編輯交易失敗`,manualPrintCreated:`已新增手動列印費用，帳本已重新計算`,manualPrintFailed:`建立手動列印失敗`,memberSaved:`成員已儲存`,memberSaveFailed:`儲存成員失敗`,memberRemoved:`成員已移除`,memberRemoveFailed:`移除成員失敗`,costCenterNameRequired:`成本中心名稱為必填項`,costCenterUpdated:`成本中心已更新`,costCenterUpdateFailed:`更新成本中心失敗`,confirmDeleteCostCenter:`刪除成本中心 "{{name}}" ?`,costCenterDeleted:`成本中心已刪除`,costCenterDeleteFailed:`刪除成本中心失敗`,deleteTransactionConfirm:`刪除此交易？餘額將自動重新計算。`,deposit:`存款`,withdraw:`取款`,printCharge:`列印費用`,deleteTransaction:`刪除交易`},printers:{addPreflight:{checking:`正在檢查連線...`,warning:`部分連線檢查未通過。此印表機可能顯示為離線。請查看下方的檢查項目，盡量修復，或仍然儲存。`,back:`返回`,saveAnyway:`仍然儲存`},title:`印表機`,addPrinter:`新增印表機`,editPrinter:`編輯印表機`,deletePrinter:`刪除印表機`,printerName:`印表機名稱`,serialNumber:`序列號`,ipAddress:`IP 位址 / 主機名稱`,accessCode:`存取碼`,model:`型號`,nozzleCount:`噴嘴數量`,autoArchive:`自動歸檔`,status:{available:`可用`,idle:`空閒`,printing:`列印中`,paused:`已暫停`,offline:`離線`,problem:`故障`,error:`錯誤`,finished:`已完成`,unknown:`未知`},temperatures:{nozzle:`噴嘴`,bed:`熱床`,chamber:`腔室`},heaterHistory:{title:`加熱歷史`,openLabel:`查看加熱歷史`,nozzle:`噴嘴`,nozzle2:`噴嘴 2`,bed:`熱床`,chamber:`腔室`,error:`載入歷史失敗`,empty:`尚未記錄資料`},progress:`{{percent}}% 完成`,timeRemaining:`剩餘 {{time}}`,deleteConfirm:`確定要刪除"{{name}}"嗎？`,maintenanceOk:`維護正常`,maintenanceWarning:`{{count}} 個警告`,maintenanceWarning_plural:`{{count}} 個警告`,maintenanceDue:`{{count}} 個到期`,maintenanceDue_plural:`{{count}} 個到期`,sort:{name:`名稱`,status:`狀態`,model:`型號`,location:`位置`,eta:`剩餘時間`,ascending:`升序排列`,descending:`降序排列`},cardSize:{small:`小卡片`,medium:`中卡片`,large:`大卡片`,extraLarge:`超大卡片`},pageView:{openCamWallPage:`在獨立頁面中開啟攝影機牆`,cards:`卡片`,camWall:`攝影機牆`},camWall:{page:{tokenRejected:`此攝影機牆連結已失效。權杖可能已過期或遭撤銷。`,loadFailed:`無法載入印表機。`},noPrinters:`沒有可顯示的印表機`,noSignal:`無訊號`,live:`直播`,snap:`快照`,off:`關閉`,summary:`直播 {{live}} 個，快照 {{snap}} 個，共 {{total}} 個`,layer:`第 {{cur}}/{{total}} 層`,timeLeft:`剩餘 {{time}}`,statusMode:{off:`關閉`,compact:`精簡`,full:`完整`},settings:{title:`攝影機牆設定`,maxLive:`最大直播數`,maxLiveHint:`同時直播的畫面數量。其他畫面以快照重新整理。`,snapshotInterval:`快照重新整理間隔（秒）`,snapshotIntervalHint:`非直播畫面取得新快照的頻率。`,statusOverlay:`狀態疊加`,statusOverlayHint:`精簡：僅顯示狀態標籤。完整：加上進度、層數、剩餘時間。`}},hideOffline:`隱藏離線`,nextAvailable:`下一個可用`,powerOn:`開機`,offlinePrintersWithPlugs:`帶智慧插座的離線印表機`,noPrintersConfigured:`尚未設定印表機`,search:`搜尋印表機...`,noSearchResults:`沒有印表機符合您的搜尋或篩選條件`,filter:{allStatuses:`所有狀態`,allLocations:`所有位置`},toolbar:{filters:`篩選`,view:`檢視`,actions:`操作`},readyToPrint:`準備列印`,external:`外部`,extL:`外接左`,extR:`外接右`,deleteArchives:`刪除列印歸檔`,noLabel:`無標籤`,printPreview:`列印預覽`,width:`寬度`,height:`高度`,noObjectsFound:`未找到物件`,objectsLoadedOnPrintStart:`物件在列印開始時載入`,willBeSkipped:`將被跳過`,name:`名稱`,serialCannotBeChanged:`序列號無法更改`,locationHelp:`用於分組印表機和篩選佇列任務`,wifiSignal:{veryWeak:`非常弱`,weak:`弱`,fair:`一般`,good:`良好`,excellent:`優秀`},maintenanceUpToDate:`所有維護均已完成 - 點選檢視`,maintenance:{title:`維護中`,subtitle:`此印表機已暫停 — 未連接、不參與佇列調度、不發送通知。`,pillLabel:`維護`,exitButton:`退出維護`,menuEnter:`進入維護模式`,menuExit:`退出維護模式`,toastEntered:`{{name}} 已進入維護模式`,toastExited:`{{name}} 已恢復在線`,confirmMidPrintTitle:`在列印過程中進入維護模式？`,confirmMidPrintMessage:`{{name}} 目前正在列印。進入維護模式將斷開 MQTT 連線，並停止此工作的進度追蹤和完成通知。是否繼續？`,editFieldLabel:`維護模式`,editFieldHelp:`啟用後，此印表機將從 MQTT、佇列調度和通知中暫停 — 適用於維修、並行 Bambuddy 安裝或暫時停用。`},chamberLightOn:`開啟腔室燈`,chamberLightOff:`關閉腔室燈`,files:`檔案`,browseFiles:`瀏覽印表機檔案`,autoOffAfterPrint:`列印後自動關機`,autoOffExecuted:`已執行自動關機 - 開啟印表機以重設`,hmsErrors:`HMS 錯誤`,viewHmsErrors:`檢視 {{count}} 個 HMS 錯誤`,resume:`繼續`,pause:`暫停`,stop:`停止`,camera:`攝影機`,skipObject:`跳過物件`,reconnect:`重新連線`,forceRefresh:`強制重新整理`,forceRefreshSuccess:`已請求重新整理`,mqttDebug:`MQTT 偵錯`,printerInformation:`印表機資訊`,copyToClipboard:`複製`,copied:`已複製！`,state:`狀態`,wifiSignalLabel:`Wi-Fi 訊號`,developerMode:`開發者模式`,enabled:`已啟用`,disabled:`已停用`,addedOn:`新增日期`,sdCard:`SD 卡`,inserted:`已插入`,notInserted:`未插入`,totalPrintHours:`列印時長`,activeNozzle:`目前：{{nozzle}} 噴嘴`,amsSwitchInletTooltip:`耗材變軌器 IN-{{inlet}}（{{side}}）— 可向兩個噴嘴供料`,nozzleRack:`噴嘴架`,nozzleDocked:`已停靠`,nozzleMounted:`已安裝`,nozzleActive:`使用中`,nozzleIdle:`空閒`,nozzleDiameter:`直徑`,nozzleType:`類型`,nozzleStatus:`狀態`,nozzleFilament:`耗材`,nozzleWear:`磨損`,nozzleMaxTemp:`最高溫度`,nozzleSerial:`序列號`,nozzleHardenedSteel:`硬化鋼`,nozzleStainlessSteel:`不鏽鋼`,nozzleTungstenCarbide:`碳化鎢`,nozzleFlow:`流量`,nozzleHighFlow:`高流量`,nozzleStandardFlow:`標準`,firmwareUpdate:`韌體更新`,firmwareInstructions:`在印表機觸控式螢幕上，前往`,firmwareNav:`導航到`,settings:`設定`,firmware:`韌體`,discoverPrinters:`發現印表機`,searching:`搜尋中...`,manualEntry:`手動輸入`,addFromCloud:`從雲端新增`,toast:{printerDeleted:`印表機已刪除`,missingSpoolAssignment:`已在{{printer}}上開始列印。以下料槽未分配耗材: {{slots}}`,killSwitchTriggered:`計費終止開關已停止 {{printer}} 上的未授權列印：{{filename}}`,billingChargeFailed:`{{printer}} 上的 {{filename}} 計費失敗。預算保留已保留；請檢查伺服器記錄。`,assignmentVerified:`耗材已載入料槽{{slot}}（{{printer}}）`,assignmentVerifiedNoKprofile:`{{printer}}的料槽{{slot}}已載入，但流量校準設定檔（K設定檔）未套用`,assignmentNotConfirmed:`無法確認{{printer}}上料槽{{slot}}的分配，請檢查AMS料槽`,printerAdded:`印表機已新增`,printerUpdated:`印表機已更新`,failedToDelete:`刪除印表機失敗`,failedToAdd:`新增印表機失敗`,connectionFailedNotAdded:`無法連線到印表機。請檢查 IP 位址、序號和存取碼，並確認已啟用僅區域網路（LAN-only）模式。該印表機未被新增。`,failedToUpdate:`更新印表機失敗`,commandSent:`命令已傳送`,failedToSendCommand:`傳送命令失敗`,turnedOn:`{{name}} 已開啟`,failedToPowerOn:`開啟 {{name}} 失敗`,scriptTriggered:`腳本已觸發`,printStopped:`列印已停止`,printPaused:`列印已暫停`,printResumed:`列印已繼續`,referenceDeleted:`參考已刪除`,detectionAreaSaved:`檢測區域已儲存`,failedToRunScript:`執行腳本失敗`,failedToStopPrint:`停止列印失敗`,failedToPausePrint:`暫停列印失敗`,failedToResumePrint:`繼續列印失敗`,failedToControlChamberLight:`控制腔室燈失敗`,failedToSetSpeed:`設定列印速度失敗`,failedToUpdateSetting:`更新設定失敗`,failedToSkipObjects:`跳過物件失敗`,failedToRereadRfid:`重新讀取 RFID 失敗`,failedToCheckPlate:`檢查列印板失敗`,failedToUpdateLabel:`更新標籤失敗`,failedToDeleteReference:`刪除參考失敗`,failedToSaveDetectionArea:`儲存檢測區域失敗`,plateCheckEnabled:`列印板檢查已啟用`,plateCheckDisabled:`列印板檢查已停用`,calibrationSaved:`校準已儲存！`,calibrationFailed:`校準失敗`,rfidRereadInitiated:`已發起 RFID 重新讀取`,loadInitiated:`載入耗材中…`,unloadInitiated:`卸載耗材中…`,failedToLoad:`載入耗材失敗`,failedToUnload:`卸載耗材失敗`},connection:{connected:`已連線`,offline:`離線`},plateStatus:{markCleared:`將列印板標記為已清理`,cleared:`列印板已清理`,notCleared:`列印板未清理`,inUse:`列印板使用中`},queue:{inQueue:`佇列中有 {{count}} 個列印任務`,inQueue_plural:`佇列中有 {{count}} 個列印任務`},controls:`控制`,rfid:{reread:`重新讀取 RFID`},ams:{load:`載入`,unload:`卸載`,feedTitle:`要將 {{slot}} 載入哪個噴嘴？`,feedPrompt:`Filament Track Switch 可以將此槽位送往任一熱端。請選擇要送入的一側。`,feedLeft:`左噴嘴`,feedRight:`右噴嘴`,feedAlreadyLoaded:`已載入`,switchNotReady:`Filament Track Switch 尚未設定。請在印表機上為每個 AMS 指派入口後再試一次。`},bedJog:{limitWarning:`手動移動時不會強制執行行程限位——Bambu 韌體存在缺陷，遠端指令會忽略軟體限位。請小心移動以避免碰撞。`,title:`點動控制`,bed:`熱床`,step:`步長 (mm)`,up:`熱床上移`,down:`熱床下移`,toolheadUp:`噴頭上移`,toolheadDown:`噴頭下移`,disabledWhilePrinting:`列印中已停用`,notHomedTitle:`印表機未歸零`,notHomedMessage:`印表機自上次列印以來尚未歸零。請先執行自動歸零以確保安全定位（先停放噴頭，然後歸零 X、Y 和 Z），或者直接移動 — 軟限位將被繞過。`,homeZ:`自動歸零`,moveAnyway:`強制移動`,homingStarted:`印表機自動歸零中…`},permission:{noAdd:`您沒有新增印表機的權限`,noEdit:`您沒有編輯印表機的權限`,noDelete:`您沒有刪除印表機的權限`,noControl:`您沒有控制印表機的權限`,noFiles:`您沒有存取印表機檔案的權限`,noAmsRfid:`您沒有重新讀取 AMS RFID 的權限`,noSmartPlugControl:`您沒有控制智慧插座的權限`,noCamera:`您沒有檢視攝影機的權限`},modal:{addTitle:`新增印表機`,editTitle:`編輯印表機`,myPrinter:`我的印表機`,selectModel:`選擇型號...`,locationGroup:`位置 / 分組（可選）`,locationPlaceholder:`例如：工作室、辦公室、地下室`,autoArchiveLabel:`自動歸檔已完成的列印`,fromPrinterSettings:`來自印表機設定`,modelOptional:`型號（可選）`,saveChanges:`儲存更改`},skipObjects:{tooltip:`跳過物件`,onlyWhilePrinting:`跳過物件（僅在列印時）`,requiresMultiple:`跳過物件（需要2個以上物件）`,title:`跳過物件`,matchIdsInfo:`將 ID 與印表機螢幕上的 ID 進行對照`,printerShowsIds:`印表機螢幕上顯示列印板上物件的 ID`,skipSelected:`跳過所選`,skipping:`跳過中...`,noObjectsSelected:`未選擇物件`,selectObjectsToSkip:`選擇要從目前列印中跳過的物件`,skipped:`已跳過`,objectsSkipped:`物件已跳過`,activeCount:`{{count}} 個活躍`,waitForLayer:`等待第2層以上才能跳過物件（目前第 {{layer}} 層）`,skip:`跳過`,confirmTitle:`跳過物件？`,confirmMessage:`確定要跳過"{{name}}"嗎？此操作無法復原。`,confirmAllMessage:`已選取所有剩餘物件。這將停止列印工作。是否繼續？`,confirmMultipleMessage:`跳過選取的 {{count}} 個物件？此操作無法復原。`},confirm:{deleteTitle:`刪除印表機`,deleteMessage:`確定要刪除"{{name}}"嗎？這將移除所有連線設定。`,deleteArchivesNote:`此印表機的所有列印歷史將被永久刪除。`,keepArchivesNote:`列印歷史將保留，但不再與此印表機連結。`,stopTitle:`停止列印`,stopMessage:`確定要停止"{{name}}"上的目前列印嗎？這將取消列印任務。`,stopButton:`停止列印`,pauseTitle:`暫停列印`,pauseMessage:`確定要暫停"{{name}}"上的目前列印嗎？`,pauseButton:`暫停列印`,resumeTitle:`繼續列印`,resumeMessage:`確定要繼續"{{name}}"上的列印嗎？`,resumeButton:`繼續列印`,powerOnTitle:`開啟印表機`,powerOnMessage:`確定要開啟"{{name}}"的電源嗎？`,powerOnButton:`開機`,powerOffTitle:`關閉印表機`,powerOffMessage:`確定要關閉"{{name}}"的電源嗎？`,powerOffWarning:`警告："{{name}}"正在列印中！確定要關閉電源嗎？這將中斷列印並可能損壞印表機。`,powerOffButton:`關機`,haToggleTitle:`切換"{{name}}"`,haToggleMessage:`切換 Home Assistant 實體 {{entity}}？如果目前為開啟狀態，可能會關閉電源。`,haToggleWarning:`警告："{{name}}"正在列印中！切換 {{entity}} 可能會切斷電源並中斷列印。是否繼續？`,haToggleButton:`切換`},bulk:{select:`選擇`,selectAll:`全選`,selectByLocation:`按位置選擇`,selected:`已選擇{{count}}臺`,actions:{stop:`停止`,pause:`暫停`,resume:`繼續`,clearPlate:`清除列印床`,clearHMS:`清除通知`},confirm:{stopTitle:`停止{{count}}個列印任務`,stopMessage:`這將取消{{count}}臺印表機上的活動列印任務。此操作無法復原。`,stopButton:`全部停止`,pauseTitle:`暫停{{count}}個列印任務`,pauseMessage:`這將暫停{{count}}臺印表機上的活動列印任務。`,pauseButton:`全部暫停`,clearPlateTitle:`清除{{count}}個列印床`,clearPlateMessage:`這將清除{{count}}臺印表機的列印床，可能會觸發佇列中的任務。`,clearPlateButton:`全部清除`},success:`{{action}}已在{{count}}臺印表機上完成`,partial:`{{succeeded}}成功，{{failed}}失敗`,noneApplicable:`沒有選中的印表機處於適合此操作的狀態`,selectByState:`按狀態選擇`},discovery:{title:`發現印表機`,searching:`搜尋中...`,scanning:`掃描中...`,scanProgress:`掃描中... {{scanned}}/{{total}}`,foundPrinters:`發現 {{count}} 臺印表機`,noPrintersFound:`未找到印表機`,noPrintersFoundSubnet:`在指定子網中未找到印表機。`,noPrintersFoundNetwork:`在網路上未找到印表機。`,allConfigured:`所有發現的印表機已設定完畢。`,alreadyAdded:`已新增`,select:`選擇`,manualEntry:`手動輸入`,addFromCloud:`從雲端新增`,subnetToScan:`要掃描的子網`,dockerNote:`偵測到 Docker 環境。請以 CIDR 格式輸入印表機所在子網。需要在 docker-compose.yml 中設定 network_mode: host。`,scanSubnet:`掃描子網查詢印表機`,discoverNetwork:`在網路上發現印表機`,scanningSubnet:`正在掃描子網查詢拓竹印表機...`,scanningNetwork:`正在掃描網路...`,serialRequired:`需要序列號`,unknown:`未知`,failedToStart:`啟動發現失敗`,customSubnetOption:`自訂子網路...`,customSubnetLabel:`自訂子網路 (CIDR)`,customSubnetNote:`如果您的印表機與此伺服器位於不同的網路中，請使用自訂子網路。FTP (990) 和 MQTT (8883) 連接埠必須能夠跨越路由邊界存取。`},drying:{start:`開始乾燥`,stop:`停止乾燥`,temperature:`溫度`,duration:`時長`,hours:`小時`,timeRemaining:`剩餘 {{time}}`,active:`乾燥中`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`不支援乾燥`,powerRequired:`連線AMS電源介面卡以啟用乾燥`,cannotDryNow:`AMS 目前無法開始乾燥`,startingDrying:`正在啟動乾燥...`,toastCommandSent:`已傳送乾燥命令`,toastStopped:`已停止乾燥`,toastNotStarted:`印表機已接受命令，但 AMS 未開始乾燥。請檢查 AMS 電源變壓器是否已連接，以及印表機是否處於閒置狀態。`,screenOnly:`此印表機的 AMS 乾燥只能在印表機本身的螢幕上操作（Bambu 的限制）`,stoppingDrying:`正在停止乾燥...`,rotateTray:`乾燥時旋轉料盤`,rotateUnavailableReason:`無法使用 — 此 AMS 中有插槽已裝入列印頭。料盤被進料管固定，無法旋轉。請先退回耗材。`,startMode:`開始時間`,modeNow:`立即`,modeDelay:`延遲後`,modeAtTime:`指定時間`,schedule:`預約`,scheduledFor:`乾燥已預約：{{time}}`,scheduledAsap:`乾燥已預約（等待印表機）`,cancelScheduled:`取消預約乾燥`,scheduleFailed:`預約乾燥失敗`,retractFilament:`請退回AMS出口處的耗材後再開始乾燥`,waitingAmsNotFound:`正在等待偵測到AMS`,waitingOffline:`正在等待印表機上線`,waitingPrinterBusy:`正在等待印表機空閒`,waitingAlreadyDrying:`正在等待目前的乾燥週期結束`,waitingInterrupted:`已中斷，將在印表機空閒後重新開始`,scheduleFailedReason:`預約乾燥失敗：{{reason}}`,scheduleFailedUnknown:`未知錯誤`,dismissFailed:`忽略`},amsBackup:{titleOn:`AMS 備用料盤已開啟。點擊以停用。`,titleOff:`AMS 備用料盤已關閉。點擊以啟用。`,titleUnknown:`本印表機不支援讀取 AMS 備用料盤狀態。`,toastEnabled:`AMS 備用料盤已啟用`,toastDisabled:`AMS 備用料盤已停用`,modalTitle:`AMS 備用料盤`,modalHelp:`目前料槽用盡時，印表機會按此順序在使用相同預設和顏色的料槽之間循環。`,modalNoSlots:`未載入耗材。`,modalNoPairs:`沒有備用料盤對 — 沒有兩個料槽同時匹配預設和顏色。`,extruderRightShort:`右`,extruderLeftShort:`左`,stateOn:`已啟用`,stateOff:`已停用`,stateUnknown:`此印表機不支援`},activeJobSlot:{title:`此料槽在目前列印中是耗材 {{n}}`,ariaLabel:`目前列印料槽 {{n}}`},expectedSlot:{title:`印表機正在等待此料槽裝入耗材`,ariaLabel:`需要裝料的料槽 {{n}}`,label:`{{ams}} · 料槽 {{slot}}`,external:`外部料卷`},filaments:`耗材`,externalSpool:{hide:`隱藏外部料卷`,show:`顯示外部料卷`},openCameraOverlay:`開啟攝影機疊加層`,openCameraWindow:`在新視窗中開啟攝影機`,firmwareUpdateAvailable:`韌體更新可用：{{current}} → {{latest}}`,firmwareUpToDate:`韌體 {{version}} — 已是最新`,firmwareUpdateButton:`更新`,plateDetection:{noPermission:`您沒有更新印表機的權限`,enabledClick:`列印板檢查已啟用 - 點選停用`,disabledClick:`列印板檢查已停用 - 點選啟用`,manageCalibration:`管理列印板檢測校準`,calibrationRequired:`需要校準`,calibrationInstructions:`請確保列印板<strong>完全空置</strong>，然後點選校準。`,calibrationDescription:`校準會拍攝空置列印板的參考影像。後續檢查將與此參考進行比較以檢測物體。`,calibrationTip:`<strong>提示：</strong>您最多可以為不同的列印板儲存5個校準。系統會在檢查時自動使用最佳匹配。`,plateEmpty:`列印板似乎是空的`,objectsDetected:`在列印板上偵測到物體`,confidence:`置信度`,difference:`差異`,analysisPreview:`分析預覽：`,analysisLegend:`綠色框 = 檢測區域，紅色覆蓋 = 與校準的差異`,savedReferences:`已儲存的參考 ({{count}}/{{max}})`,deleteReference:`刪除參考`,labelPlaceholder:`標籤...`,clickToEdit:`{{label}} - 點選編輯`,clickToAddLabel:`點選新增標籤`},speed:{title:`列印速度`,silent:`靜音 (50%)`,standard:`標準 (100%)`,sport:`運動 (124%)`,ludicrous:`瘋狂 (166%)`},airduct:{title:`風道模式`,cooling:`製冷`,heating:`加熱`},noSdCard:`無SD`,door:{open:`開`,closed:`關`},fans:{partCooling:`零件冷卻風扇`,auxiliary:`輔助風扇`,leftAuxiliary:`左輔助風扇`,exhaust:`排氣`,chamber:`腔室風扇`},clickToViewHmsErrors:`點選檢視 HMS 錯誤`,aiDetection:{safe:`安全`,warning:`警告`,failure:`失敗`,idle:`空閒`,error:`未檢測`,unknown:`啟動中`,tooltipError:`AI 故障檢測未檢測此次列印：{{reason}} - 點擊查看詳情`,tooltipUnknown:`AI 故障檢測：正在等待首個結果 - 點擊查看詳情`,errorHint:`本次列印未被檢測。下方問題解決後，檢測將自動恢復。`,tooltip:`AI 故障檢測：{{status}}（評分 {{score}}）- 點擊查看詳情`,tooltipIdle:`AI 故障檢測已啟用 - 下次列印時開始監控 - 點擊查看詳情`,modalTitle:`AI 故障檢測 - {{name}}`,currentStatus:`狀態`,score:`評分`,framesAnalyzed:`已分析幀數`,idleHint:`目前沒有正在監控的列印。下次列印時將自動開始監控。`,lastError:`最近錯誤`,openSettings:`開啟設定`},estimatedCompletion:`預計完成時間`,plateNumber:`板 {{number}}`,slotOptions:`槽位選項`,amsPopup:{friendlyName:`AMS 名稱`,friendlyNamePlaceholder:`例如 AMS 友好名稱`,serialNumber:`序列號`,firmwareVersion:`韌體`,save:`儲存`,clear:`清除`,noEditPermission:`您沒有重新命名 AMS 單元的權限`},firmwareModal:{title:`韌體更新`,titleUpToDate:`韌體資訊`,currentVersion:`目前版本：`,latestVersion:`最新版本：`,releaseNotes:`發布說明`,checkingPrereqs:`正在檢查前提條件...`,sdCardReady:`SD 卡已就緒。點選下方上傳韌體。`,uploadedSuccess:`韌體已上傳到 SD 卡！`,applyInstructions:`在印表機上套用更新：`,step1:`在印表機觸控式螢幕上，前往<strong>設定</strong>`,step2:`導航到<strong>韌體</strong>`,step3:`選擇<strong>從 SD 卡更新</strong>`,step4:`更新將需要 10-20 分鐘`,done:`完成`,starting:`啟動中...`,uploadFirmware:`上傳韌體`,uploadFailed:`上傳啟動失敗：{{error}}`,uploadedToast:`韌體已上傳！請在印表機螢幕上觸發更新。`,availableVersions:`可用版本`,usable:`可用`,unavailable:`不可用`,installed:`已安裝`,newerBadge:`較新`,olderBadge:`較舊`,currentBadge:`目前`},accessCodePlaceholder:`留空以保持目前值`,roi:{title:`檢測區域 (ROI)`,xStart:`X 起點`,yStart:`Y 起點`,width:`寬度`,height:`高度`,instruction:`調整檢測區域以聚焦到列印板。預覽中的綠色框顯示目前區域。`},developerModeWarning:`以下印表機未啟用開發者區域網路模式：{{names}}。某些功能可能無法使用。`,howToEnable:`如何啟用`,incompatibleFile:`此檔案是為 {{slicedFor}} 切片的，但該印表機是 {{printerModel}}`,dropNotPrintable:`只能列印 .gcode 和 .gcode.3mf 檔案`,dropToPrint:`拖放以列印`,dropToQueue:`拖放以加入佇列`},archives:{media:{title:`列印影片`,download:`下載列印影片`,searching:`正在檢查印表機中的影片…`,searchFailed:`無法檢查印表機中的影片。`,none:`找不到此列印工作的縮時攝影或 IP 攝影機影片片段。`,attachedTimelapse:`已附加的縮時攝影`,printerFiles:`仍保留在印表機上的檔案`,downloadSelected:`下載所選檔案`,printerMissing:`印表機已不在設定中`,timelapseUnavailable:`無法讀取縮時攝影目錄`,ipcamUnavailable:`無法讀取 IP 攝影機目錄`},title:`列印歸檔`,no3mfBanner:{title:`最近的一些列印未能附帶縮圖封存`,body:`切片機沒有在印表機的 SD 卡上留下 .gcode.3mf 檔案，因此 Bambuddy 無法取得縮圖或切片機中繼資料。這通常是因為切片機 (Bambu Studio / OrcaSlicer 的裝置分頁) 中「將傳送的檔案儲存在外部儲存中」已關閉。`,docsLink:`檢視安裝步驟 4`,docsLinkInternalStorage:`為什麼會這樣`,titleInternalStorage:`最近有些列印留在了印表機的內部儲存中`,bodyInternalStorage:`Bambu Studio 把切片檔案儲存到了印表機的內部儲存而不是記憶卡上，因此 Bambuddy 透過 FTP 讀不到任何東西。在 H2 系列、P2S 與 X2D 上，「列印」按鈕總是這樣做，只有「傳送」才提供選擇，而它的預設值也是「快取」。這些列印仍會帶著名稱與時間歸檔，只是沒有縮圖與切片中繼資料。要取得完整歸檔，請從 Bambuddy 啟動列印，或改用 OrcaSlicer 切片；若要繼續用 Bambu Studio，請用「傳送」並選擇「外部儲存」，之後再啟動列印。以上都需要印表機中插有記憶卡或 USB 隨身碟。`,titleNoExternalStorage:`最近有些列印無法歸檔 — 印表機中沒有儲存媒體`,bodyNoExternalStorage:`印表機的插槽中未偵測到記憶卡或隨身碟，切片檔案無處存放，Bambuddy 也無從讀取。插入一個，下次列印就會完整歸檔。`,titleInternalHistory:`最近有些列印是從印表機裡既有的檔案啟動的`,bodyInternalHistory:`這些列印來自印表機自己的檔案庫 — 從它的螢幕重新列印、從 Handy 啟動，或是先前傳送、稍後才列印的檔案。Bambuddy 透過 FTP 讀取列印檔案，而 FTP 只提供記憶卡或隨身碟，印表機卻把這個檔案庫放在 FTP 搆不到的區域，因此沒有 3MF 可讀。切片軟體的任何設定都改變不了這一點，因為這些列印根本沒有傳送過檔案。它們仍會帶著名稱與時間歸檔，並且可以在「編輯歸檔」中手動填入已用耗材。要獲得完整歸檔，請從 Bambuddy 或你的切片軟體啟動列印。`,titleFtpsCooloff:`最近有些列印無法歸檔 — 印表機拒絕了檔案連線`,bodyFtpsCooloff:`Bambuddy 開啟了印表機的檔案傳輸連接埠 (FTPS 990)，而印表機回應的內容並不是 TLS，因此無法從它讀取任何東西。這些列印仍會帶著名稱和時間歸檔，只是沒有縮圖和切片中繼資料。這不是切片軟體的設定，也不是你改動了什麼 —— 相同型號、相同韌體在其他安裝上運作正常，受影響的印表機通常過一陣子會自行恢復。出現這種失敗後，Bambuddy 會暫停對該印表機的傳輸五分鐘，暫停結束後再回來取檔案，所以短暫的一次會自行補齊；卡片仍然是空的，表示拒絕持續得比重試更久。觸發原因目前尚不清楚。如果反覆出現，請在系統頁面開啟除錯記錄，並把支援套件附在你的報告裡。`,titleFtpTransferFailed:`部分近期列印未能封存 — 檔案傳輸逾時`,bodyFtpTransferFailed:`切片檔就在印表機的記憶卡上，印表機也確實開始傳輸了，但傳輸未能在允許的時間內完成。列印開始時，印表機還要同時處理攝影機、狀態訊息與工作上傳，較大的 3MF 檔未必能在這種情況下傳完。這些列印仍保留名稱與時間，只是缺少縮圖與切片資料。這不是切片軟體的設定問題，也不是你更動造成的。Bambuddy 會在接下來的十分鐘內再取三次檔案，因此多數情況會自行補齊；如果卡片仍是空的，代表那幾次嘗試同樣逾時了。若經常發生，請在 設定 > 網路 > FTP 重試 中調高 連線逾時。`,dismissLabel:`關閉此通知`},searchPlaceholder:`搜尋歸檔...`,filterByPrinter:`按印表機篩選`,filterByStatus:`按狀態篩選`,sortBy:`排序方式`,sortNewest:`最新優先`,sortOldest:`最舊優先`,sortName:`名稱`,sortDuration:`時長`,sortLargest:`最大優先`,sortSmallest:`最小優先`,sortSize:`大小`,noArchives:`未找到歸檔`,noArchivesSearch:`沒有匹配搜尋的歸檔`,originalPrintNotVisible:`原始列印不可見 - 請嘗試清除篩選條件`,noArchivesYet:`尚無歸檔`,prints:`條列印`,pagination:{showing:`顯示`,to:`至`,of:`共`,show:`每頁`,page:`頁`,all:`全部`},loadingArchives:`載入歸檔中...`,releaseToUpload:`放開以上傳`,showAll:`顯示全部`,showFavoritesOnly:`僅顯示收藏`,gridView:`網格檢視`,listView:`列表檢視`,calendarView:`日曆檢視`,logView:`列印日誌`,manageTags:`管理標籤`,showFailedPrints:`顯示失敗的列印`,hideFailedPrints:`隱藏失敗的列印`,hideDuplicates:`隱藏重複項`,viewOriginalPrint:`點選檢視原始列印 (#{{id}})`,printTime:`列印時間`,filamentUsed:`耗材用量`,cost:`成本`,preview:`預覽`,deleteArchive:`刪除歸檔`,deleteConfirm:`確定要刪除此歸檔嗎？`,favorite:`收藏`,unfavorite:`取消收藏`,viewDetails:`檢視詳情`,status:{completed:`已完成`,failed:`失敗`,stopped:`已停止`},toast:{source3mfAttached:`源 3MF 已附加：{{filename}}`,failedUploadSource3mf:`上傳源 3MF 失敗`,source3mfRemoved:`源 3MF 已移除`,failedRemoveSource3mf:`移除源 3MF 失敗`,f3dAttached:`F3D 已附加：{{filename}}`,failedUploadF3d:`上傳 F3D 失敗`,f3dRemoved:`F3D 已移除`,failedRemoveF3d:`移除 F3D 失敗`,timelapseAttached:`縮時攝影已附加：{{filename}}`,timelapseAlreadyAttached:`縮時攝影已附加`,noMatchingTimelapse:`未找到匹配的縮時攝影`,failedScanTimelapse:`掃描縮時攝影失敗`,failedAttachTimelapse:`附加縮時攝影失敗`,timelapseRemoved:`縮時攝影已移除`,failedRemoveTimelapse:`移除縮時攝影失敗`,timelapseUploaded:`縮時攝影已上傳：{{filename}}`,failedUploadTimelapse:`上傳縮時攝影失敗`,archiveDeleted:`歸檔已刪除`,failedDeleteArchive:`刪除歸檔失敗`,addedToFavorites:`已新增到收藏`,removedFromFavorites:`已從收藏中移除`,projectUpdated:`專案已更新`,failedUpdateProject:`更新項目失敗`,linkCopied:`連結已複製到剪貼簿`,failedCopyLink:`複製連結失敗`,photoDeleted:`照片已刪除`,failedDeletePhoto:`刪除照片失敗`,failedDeleteArchives:`刪除歸檔失敗`,failedUpdateFavorites:`更新收藏失敗`,exportDownloaded:`匯出已下載`,exportFailed:`匯出失敗`},menu:{print:`列印`,openInBambuStudio:`在切片軟體中開啟`,slice:`切片`,externalLink:`外部連結`,viewOnMakerWorld:`在 MakerWorld 上檢視`,preview3d:`3D 預覽`,viewTimelapse:`檢視縮時攝影`,scanForTimelapse:`掃描縮時攝影`,uploadTimelapse:`上傳縮時攝影`,removeTimelapse:`移除縮時攝影`,downloadSource3mf:`下載源 3MF`,uploadSource3mf:`上傳源 3MF`,replaceSource3mf:`替換源 3MF`,removeSource3mf:`移除源 3MF`,uploadF3d:`上傳 F3D`,replaceF3d:`替換 F3D`,downloadF3d:`下載 F3D`,removeF3d:`移除 F3D`,download:`下載`,copyDownloadLink:`複製下載連結`,qrCode:`QR 碼`,viewPhotos:`檢視照片`,viewPhotosCount:`檢視照片 ({{count}})`,projectPage:`專案頁面`,addToFavorites:`新增到收藏`,removeFromFavorites:`從收藏中移除`,edit:`編輯`,printLog:`列印記錄`,goToProject:`前往專案：{{name}}`,addToProject:`新增到專案`,removeFromProject:`從專案中移除`,loading:`載入中...`,noProjectsAvailable:`無可用專案`,searchProjects:`搜尋專案…`,select:`選擇`,deselect:`取消選擇`,delete:`刪除`},permission:{noReprint:`您沒有重新列印此歸檔的權限`,noAddToQueue:`您沒有新增到佇列的權限`,noUpdateArchives:`您沒有更新歸檔的權限`,noUploadFiles:`您沒有上傳檔案的權限`,noDownload:`您沒有下載歸檔的權限`,noCopyLink:`您沒有複製下載連結的權限`,noDelete:`您沒有刪除此歸檔的權限`,noEdit:`您沒有編輯此條目的權限`,noCreate:`您沒有建立歸檔的權限`},platePicker:{title:`選擇要預覽的列印板`,hint:`此存檔包含多個列印板。選擇一個在 GCode 檢視器中開啟。`,plateLabel:`列印板 {{index}}`,objectCount:`{{count}} 個物件`,objectCount_plural:`{{count}} 個物件`,noGcode:`此存檔沒有可預覽的已切片 G 代碼。請先在 Bambu Studio 中開啟並切片。`},card:{previousPlate:`上一個板`,nextPlate:`下一個板`,plateNumber:`板 {{index}}`,moreOptions:`右鍵檢視更多選項`,addToFavorites:`新增到收藏`,removeFromFavorites:`從收藏中移除`,cancelled:`已取消`,failed:`失敗`,duplicate:`重複`,duplicateTitle:`此模型之前已列印過`,openSource3mf:`在 Bambu Studio 中開啟源 3MF（右鍵檢視更多選項）`,downloadF3d:`下載 Fusion 360 設計檔案`,viewTimelapse:`檢視縮時攝影`,viewPhoto:`檢視 1 張照片`,viewPhotos:`檢視 {{count}} 張照片`,openFolder:`開啟資料夾：{{name}}`,slicedFile:`已切片檔案 - 可以列印`,sourceFile:`僅原始檔 - 無 AMS 對應可用`,gcode:`GCODE`,source:`原始檔`,project:`專案：{{name}}`,runsBadge:`{{count}} 次列印`,runsBadgeTitle:`共 {{count}} 次列印 — 成功 {{successful}} 次，失敗 {{failed}} 次。點擊查看完整列印記錄。`,estimated:`預計：{{time}}`,actual:`實際：{{time}}`,accuracy:`準確度：{{percent}}%`,filament:`{{weight}} 克`,layer:`{{count}} 層`,layers:`{{count}} 層`,object:`{{count}} 個物件`,objects:`{{count}} 個物件`,slicedFor:`為 {{model}} 切片`,uploadedBy:`上傳者`,noPermissionReprint:`您沒有重新列印的權限`,noFileForReprint:`無可用的 3MF 檔案 — 列印紀錄時無法從印表機下載該檔案`,slicerAmsMapping:`已儲存 AMS 對應（{{printer}}）`,slicerAmsMappingTooltip:`切片軟體選擇的 AMS 槽位已為 {{printer}} 儲存。槽位編號僅在該印表機上有意義，因此只有再次傳送至 {{printer}} 時，重新列印才會重複使用。`,noPermissionEdit:`您沒有編輯歸檔的權限`,noPermissionDelete:`您沒有刪除歸檔的權限`,openInBambuStudio:`在切片軟體中開啟`,openInBambuStudioToSlice:`在切片軟體中開啟進行切片`,slice:`切片`,externalLink:`外部連結`,makerWorld:`MakerWorld：{{designer}}`,viewProject:`檢視專案`,noExternalLink:`無外部連結`,preview3d:`3D 預覽`,download:`下載`,edit:`編輯`,delete:`刪除`},runLog:{title:`列印記錄`,modalTitle:`列印記錄 — {{name}}`,modalTitleFallback:`此歸檔`,empty:`此歸檔尚未記錄任何列印事件。`,col:{date:`日期`,status:`狀態`,duration:`時長`,filament:`耗材`,cost:`成本`},status:{completed:`已完成`,failed:`失敗`,cancelled:`已取消`,stopped:`已停止`,skipped:`已略過`,printing:`列印中`}},modal:{deleteArchive:`刪除歸檔`,deleteConfirm:`確定要刪除"{{name}}"嗎？此操作無法復原。`,deleteButton:`刪除`,deletePurgeStats:`同時從快速統計中刪除此列印（耗材、時間、成本、能耗）`,deleteQueueItemsWarning:`與此封存連結的 {{count}} 個佇列項目也將被移除。`,deleteBlockedByPrinting:`無法刪除 — {{count}} 個佇列項目正在列印。請先停止列印再重試。`,removeSource3mf:`移除源 3MF`,removeSource3mfConfirm:`確定要從"{{name}}"中移除源 3MF 檔案嗎？這將刪除原始切片專案檔案。`,removeButton:`移除`,removeF3d:`移除 F3D`,removeF3dConfirm:`確定要從"{{name}}"中移除 Fusion 360 設計檔案嗎？`,removeTimelapse:`移除縮時攝影`,removeTimelapseConfirm:`確定要從"{{name}}"中移除縮時攝影影片嗎？`,timelapse:`{{name}} - 縮時攝影`,selectTimelapse:`選擇縮時攝影`,selectTimelapseDesc:`未找到自動匹配。請選擇此列印的縮時攝影：`,deleteArchives:`刪除歸檔`,deleteArchivesConfirm:`確定要刪除 {{count}} 個歸檔嗎？此操作無法復原。`,deleteCount:`刪除 {{count}} 個`},page:{title:`歸檔`,printsCount:`{{filtered}} / {{total}} 次列印`,dropFilesHere:`將 .3mf 檔案拖放到此處`,releaseToUpload:`放開以上傳`,only3mfSupported:`僅支援 .3mf 檔案`,close:`關閉`,selected:`已選擇 {{count}} 個`,selectAll:`全選`,tags:`標籤`,project:`專案`,favorite:`收藏`,delete:`刪除`,toggledFavorites:`已切換 {{count}} 個歸檔的收藏狀態`,failedUpdateFavorites:`更新收藏失敗`,archivesDeleted:`已刪除 {{count}} 個歸檔`,failedDeleteArchives:`刪除歸檔失敗`,photoDeleted:`照片已刪除`,failedDeletePhoto:`刪除照片失敗`},list:{name:`名稱`,printer:`印表機`,date:`日期`,size:`大小`,actions:`操作`,hasTimelapse:`有縮時攝影`},log:{date:`日期`,printName:`列印名稱`,printer:`印表機`,user:`使用者`,status:`狀態`,duration:`時長`,filament:`耗材`,filamentUsed:`耗材用量`,cost:`成本`,energy:`電量`,energyCost:`電費`,completedAt:`完成時間`,columns:`欄位`,sortBy:`依{{column}}排序`,allPrinters:`所有印表機`,allUsers:`所有使用者`,allStatuses:`所有狀態`,cancelled:`已取消`,skipped:`已跳過`,dateFrom:`從`,dateTo:`到`,noEntries:`未找到列印日誌條目`,showing:`顯示 {{count}} / {{total}} 條`,rowsPerPage:`行數`,page:`頁`,prev:`上一頁`,next:`下一頁`,clearLog:`清除日誌`,clearLogTitle:`清除列印日誌`,clearLogConfirm:`所有列印日誌條目將被永久刪除。歸檔和佇列項目不受影響。此操作無法復原。確定要繼續嗎？`,clearLogButton:`全部清除`,cleared:`已清除 {{count}} 條日誌`,clearFailed:`清除列印日誌失敗`,deleteEntryTitle:`刪除列印日誌條目`,deleteEntryConfirm:`此條目將從日誌中刪除，其耗材、時間與成本貢獻也將從快速統計中移除。對應的歸檔（如有）不受影響。此操作無法復原。`,entryDeleted:`已刪除列印日誌條目`,entryDeleteFailed:`刪除列印日誌條目失敗`,editEntryTitle:`編輯列印日誌條目`,editEntryDescription:`對這次列印進行分類。故障分析小工具按這些值分組，因此更新會立即反映在統計數據中。`,entryUpdated:`已更新列印日誌條目`,entryUpdateFailed:`更新列印日誌條目失敗`,statuses:{completed:`已完成`,failed:`失敗`,stopped:`已停止`,cancelled:`已取消`,skipped:`已略過`}}},dispatchToast:{untitled:`列印任務`,startingPrints:`正在開始列印`,progressSummary:`{{complete}}/{{total}} 已完成 • 處理中: {{processing}}`,expandDetails:`展開派發詳情`,collapseDetails:`收起派發詳情`,awaitingPrinter:`等待印表機回應…`,status:{processing:`處理中`,completed:`已完成`,failed:`失敗`},failed:{generic:`派發失敗`,upload_failed:`上傳到印表機失敗`,start_command_failed:`印表機拒絕了開始命令`},dismiss:`關閉`},pipelineRuns:{title:`管線執行`,loading:`載入中…`,empty:`尚無管線執行。`,filter:{pipeline:`管線`,status:`狀態`,target:`目標`,all:`全部`,allPipelines:`全部管線`,allStatus:`全部狀態`,allTargets:`全部目標`,clear:`清除篩選`,noMatches:`沒有執行符合目前的篩選條件。`},totalCount_one:`{{n}} 次執行`,totalCount_other:`{{n}} 次執行`,copies:`{{n}} 份`,failedCount:`{{n}} 失敗`,copyN:`副本 {{n}}`,retryFailed:`重試失敗的`,retryOf:`#{{n}} 的重試`,pagination:`{{total}} 中的 {{start}}–{{end}}`,toast:{cancelled:`執行已取消`,cancelFailed:`取消失敗`,retryStarted:`已開始重試`,retryFailed:`重試失敗`,cleared:`已清除 {{n}} 次執行`,clearFailed:`清除失敗`},clearLog:`清除日誌`,clearConfirmTitle:`清除日誌？`,clearConfirmBody:`刪除所有已完成、失敗、已取消和部分失敗的管線執行？進行中的執行將保留。此操作無法復原。`,clearConfirmAction:`清除`,jobStatus:{pending:`等待中`,awaiting_printer:`等待印表機`,queued:`排隊中`,printing:`列印中`,completed:`已完成`,failed:`失敗`,cancelled:`已取消`},cancelledByUser:`使用者已取消`},queue:{filamentShort:{rowBadge:`所分配料盤的線材不足`,rowTooltip:`調度程式已標記此項目。點擊播放查看各槽位的不足量，並決定是否仍要列印。`,confirmTitle:`線材不足`,confirmIntro:`所分配的料盤至少有一個槽位無法滿足。仍要列印嗎？`,lineItem:`槽位 {{slot}}：需要 {{required}} g，剩餘 {{remaining}} g`,unknown:`不明`,printAnyway:`仍要列印`},slicerAmsMapping:{rowBadge:`已為此印表機儲存 AMS 槽位`,rowTooltip:`此封存保留了切片軟體選擇的確切 AMS 槽位，並為此項目的目標印表機儲存。在該印表機上重新列印時，可重複使用這些料盤，而不必再依類型與顏色重新比對。`},title:`列印佇列`,subtitle:`排程和管理您的列印任務`,editQueueItem:`編輯佇列項目`,selectAllPlates:`選擇全部 {{count}} 個熱床`,deselectAll:`取消全選`,printQueued:`已加入列印佇列`,printQueuedWillStartWhenIdle:`印表機閒置時將開始`,itemsQueued:`{{count}} 個任務已加入佇列`,sending:`傳送中...`,sendingProgress:`傳送中 {{current}}/{{total}}...`,adding:`新增中...`,addingProgress:`新增中 {{current}}/{{total}}...`,savingProgress:`儲存中 {{current}}/{{total}}...`,clearQueue:`清空佇列`,clearHistory:`清除歷史`,emptyQueue:`佇列為空`,position:`位置`,scheduledTime:`排程時間`,moveUp:`上移`,moveDown:`下移`,startNow:`立即開始`,printingInProgress:`列印進行中...`,viewArchive:`檢視歸檔`,viewInFileManager:`在檔案管理器中檢視`,itemCount:`{{count}} 個項目`,itemCount_plural:`{{count}} 個項目`,dragToReorder:`拖曳以重新排序（僅限盡快）`,reorderHint:`位置僅影響"儘快"項目。排程項目按設定時間執行。`,sjf:{label:`SJF`,tooltip:`最短任務優先 — 排程器優先處理較短的列印任務`},addedBy:`由 {{name}} 新增`,nextInQueue:`佇列中的下一個`,clearPlateSuccess:`列印板已清理 — 準備進行下一個列印`,plateNumber:`板 {{index}}`,quantity:`數量`,quantityHint:`建立 {{count}} 個佇列項目`,plateQuantityLabel:`{{plate}} 的列印次數`,plateQuantityTotal_one:`共 {{count}} 次`,plateQuantityTotal_other:`共 {{count}} 次`,batchOrders:{title:`批次訂單`,emptyTitle:`尚無批次訂單`,emptyDescription:`將多盤檔案或同一盤的多份副本加入佇列，訂單就會連同進度顯示在這裡。`,filter:{active:`進行中`,completed:`已完成`,cancelled:`已取消`,all:`全部`},status:{active:`進行中`,completed:`已完成`,cancelled:`已取消`},noTargets:`僅分組`,noTargetsHint:`建立於每盤目標數量之前，因此追蹤的是已加入佇列的列印，而不是目標數量。`,dispatchRemaining:`將剩餘 {{count}} 個加入佇列`,dispatchPlate:`將剩餘加入佇列`,strandedPlate:`沒有可複製設定的記錄`,strandedNotice:`仍欠的 {{owed}} 次列印中有 {{runs}} 次無法加入佇列：該板已沒有可複製設定的佇列中或已完成的列印。請從檔案中將該板加入佇列一次，或取消該訂單。`,dispatched:`已將 {{name}} 的剩餘列印加入佇列`,plateProgress:`已完成 {{completed}}/{{target}}`,remaining:`還差 {{count}} 個`,failed:`{{count}} 個失敗`,printing:`{{count}} 個列印中`,wholeFile:`整個檔案`,due:`截止 {{date}}`,costSoFar:`已花費 {{amount}}`,costRemaining:`(還需 {{amount}})`},activeBatches:`活躍批次`,batchProgress:`已完成 {{completed}}/{{total}}`,cancelBatch:`取消剩餘`,batchCancelled:`已取消剩餘批次項目`,cancelBatchConfirmTitle:`取消批次`,cancelBatchConfirmMessage:`結束此訂單？仍在佇列中的列印將被取消，訂單也不再要求尚未產出的部分。`,batch:{defaultName:`批次`,label:`{{count}} 項`,label_plural:`{{count}} 項`,pendingCount:`{{count}} 待處理`,pendingCount_plural:`{{count}} 待處理`,expand:`展開批次`,collapse:`收合批次`,groupAsBatch:`組合為批次…`,groupAsBatchDescription:`將選取的 {{count}} 項組合為一個可收合的批次。`,nameLabel:`批次名稱`,namePlaceholder:`例如：週五禮物`,create:`建立批次`,ungroup:`取消分組`,ungroupConfirmTitle:`取消批次分組？`,ungroupConfirmMessage:`項目將保留在佇列中，但不再分組在一起。`,dragGroup:`拖曳批次`},tabs:{batches:`批次`,queue:`佇列`,history:`歷史`,timeline:`時間軸`,pipelines:`管線`},layout:{flatList:`清單`,byPrinter:`依印表機`,groupByPrinter:`依印表機分組`},history:{emptyTitle:`目前沒有歷史記錄`,emptyDescription:`已完成、已取消與失敗的列印將顯示於此。`,showMore:`顯示更多`,showingCount:`顯示 {{total}} 項中的 {{shown}} 項`},dragGhost:{multiCount:`{{count}} 項`,batch:`{{name}}（{{count}} 份）`,batch_plural:`{{name}}（{{count}} 份）`},sections:{currentlyPrinting:`正在列印`,queued:`佇列中`,history:`歷史`},status:{pending:`等待中`,waiting:`等待中`,printing:`列印中`,paused:`已暫停`,completed:`已完成`,failed:`失敗`,skipped:`已跳過`,cancelled:`已取消`},summary:{printing:`列印中`,queued:`佇列中`,totalTime:`總佇列時間`,totalWeight:`總佇列重量`,history:`歷史`},filter:{allPrinters:`所有印表機`,unassigned:`未分配`,allStatus:`所有狀態`,allLocations:`所有位置`,any:`任意`},sort:{byPosition:`按位置排序`,byName:`按名稱排序`,byPrinter:`按印表機排序`,bySchedule:`按排程排序`,byDate:`按日期排序`,ascendingOldest:`升序（最舊優先）`,descendingNewest:`降序（最新優先）`},badges:{staged:`已暫存`,requiresPrevious:`需要前一個成功`,autoPowerOff:`自動關機`,gcodeInjection:`G-code`},empty:{title:`沒有排程的列印`,description:`從歸檔頁面使用右鍵選單中的"排程"選項來排程列印，或拖放檔案開始。`},time:{etaIfStartedNow:`若此工作現在開始的預計完成時間`,whenFree:`有空閒印表機時`,overdue:`已逾期`,now:`現在`,lessThanMinute:`不到一分鐘`,inMinutes:`{{count}} 分鐘後`,inHours:`{{count}} 小時後`},actions:{startPrint:`開始列印`,stopPrint:`停止列印`,requeue:`重新佇列`},bulkEdit:{title:`編輯 {{count}} 個項目`,title_plural:`編輯 {{count}} 個項目`,description:`僅更改的設定將套用於所選項目。`,printer:`印表機`,noChange:`— 不更改 —`,queueOptions:`佇列選項`,staged:`暫存（手動開始）`,autoPowerOff:`列印後自動關機`,requirePrevious:`要求前一個成功`,gcodeInjection:`注入G-code`,printOptions:`列印選項`,bedLevelling:`熱床調平`,flowCalibration:`流量校準`,vibrationCalibration:`振動校準`,layerInspection:`首層檢查`,timelapse:`縮時攝影`,useAms:`使用 AMS`,nozzleOffsetCali:`噴嘴偏移校準`,applyChanges:`套用更改`,selectAll:`全選`,deselectAll:`取消全選`,selected:`已選擇 {{count}} 個`,editSelected:`編輯所選`,cancelSelected:`取消所選`},confirm:{cancelTitle:`取消排程列印`,cancelMessage:`確定要取消"{{name}}"嗎？`,stopTitle:`停止列印`,stopMessage:`確定要停止目前列印"{{name}}"嗎？這將取消印表機上的列印任務。`,removeTitle:`從歷史中移除`,removeMessage:`確定要從佇列歷史中移除"{{name}}"嗎？`,clearHistoryTitle:`清除歷史`,clearHistoryMessage:`確定要從歷史中移除所有 {{count}} 個項目嗎？`,cancelButton:`取消列印`,stopButton:`停止列印`,thisPrint:`此列印`,thisItem:`此項目`},toast:{cancelled:`佇列項目已取消`,cancelFailed:`取消項目失敗`,removed:`佇列項目已移除`,keptForOrder:`已取消而非移除：這是批次訂單可以重新排入該板的唯一一次列印`,historyKeptForOrders:`保留了批次訂單仍需要的 {{kept}} 項。`,removeFailed:`移除項目失敗`,stopped:`列印已停止`,stopFailed:`停止列印失敗`,released:`列印已加入佇列`,startFailed:`開始列印失敗`,reorderFailed:`重新排序佇列失敗`,historyCleared:`已清除 {{count}} 條歷史紀錄`,clearHistoryFailed:`清除歷史失敗`,updateFailed:`更新項目失敗`,bulkCancelled:`已取消 {{count}} 個項目`,bulkCancelFailed:`批次取消項目失敗`,batchCreated:`已建立批次「{{name}}」`,batchCreateFailed:`建立批次失敗`,batchUngrouped:`已取消分組 {{count}} 項`,batchUngroupFailed:`取消批次分組失敗`,resumedAfterFailure:`已恢復佇列 — {{restored}} 個工作已恢復為待處理`,resumeAfterFailureFailed:`恢復佇列失敗`},resumeAfterFailure:{banner:`{{printer}} 因先前的列印失敗而被阻擋 — 已跳過 {{count}} 個工作`,bannerHint:`解決印表機問題後恢復佇列，以還原跳過的工作並清除阻擋。`,button:`失敗後恢復`,confirmTitle:`失敗後恢復佇列？`,confirmMessage:`將 {{printer}} 上的 {{count}} 個跳過的工作恢復為待處理，並清除上一個列印的阻擋。繼續前請確認印表機已就緒。`},timeline:{listView:`列表`,timelineView:`時間線`,unassigned:`未分配`,noData:`當天沒有計畫的列印任務`,nothingCommitted:`此時間視窗內沒有已確定的排程。暫存項目、等待項目以及閒置印表機上的 ASAP 任務不會顯示 — 設定排程時間或釋放暫存項目即可在此處查看。`,allDoneBy:`所有列印預計在 {{time}} 前完成`,staged:`暫存`,filterAll:`全部顯示`,filterPrinting:`列印中`,filterQueued:`佇列中`,time:{anyMoment:`即將完成`,minutesLeft:`剩餘{{minutes}} 分鐘`,hoursLeft:`剩餘{{hours}}小時`,hoursMinutesLeft:`剩餘{{hours}}小時{{minutes}} 分鐘`},day:{previous:`前一天`,next:`後一天`,today:`今天`},window:{back12h:`後退 12 小時`,forward12h:`前進 12 小時`,now:`現在`},printerColumnHeader:`印表機`},permissions:{noStopPrint:`您沒有停止列印的權限`,noStartPrint:`您沒有開始列印的權限`,noEdit:`您沒有編輯此佇列項目的權限`,noCancel:`您沒有取消此佇列項目的權限`,noRequeue:`您沒有重新佇列的權限`,noRemove:`您沒有移除此佇列項目的權限`,noClearHistory:`您沒有清除所有歷史的權限`,noEditItems:`您沒有編輯佇列項目的權限`,noCancelItems:`您沒有取消佇列項目的權限`}},stats:{title:`統計`,subtitle:`拖曳小工具以重新排列。點選眼睛圖示隱藏。`,overview:`概覽`,totalPrints:`總列印次數`,successRate:`成功率`,totalPrintTime:`總列印時間`,printTime:`列印時間`,totalFilament:`總耗材用量`,filamentUsed:`耗材用量`,filamentCost:`耗材成本`,totalCost:`總成本`,energyUsed:`能耗`,energyCost:`能源成本`,energyWarmingUpTooltip:`能耗追蹤正在收集每小時快照。當所選範圍之前至少存在一個快照時，時間段合計將變得準確。早期數值可能偏低。`,averagePrintTime:`平均列印時間`,printsPerDay:`每日列印次數`,byPrinter:`按印表機`,printsByPrinter:`各印表機列印次數`,byMaterial:`按材料`,byMonth:`按月份`,last7Days:`最近 7 天`,last30Days:`最近 30 天`,last90Days:`最近 90 天`,allTime:`全部時間`,quickStats:`快速統計`,printActivity:`列印活動`,filamentTypes:`耗材類型`,filamentTrends:`耗材趨勢`,failureAnalysis:`失敗分析`,timeAccuracy:`時間準確度`,successful:`成功：`,failed:`失敗：`,cancelled:`已取消：`,perfectEstimate:`100% = 完美估計`,noTimeAccuracyData:`尚無時間準確度資料`,noFilamentData:`尚無耗材資料`,noPrinterData:`尚無印表機資料`,noPrintData:`尚無列印資料`,noPrintDataLast30Days:`最近 30 天無列印資料`,failureReasons:`失敗原因`,topFailureReasons:`主要失敗原因`,failedPrintsCount:`{{failed}} / {{total}} 次列印失敗`,lastWeekRate:`上週：{{rate}}%`,resetLayout:`重設佈局`,recalculateCosts:`重新計算成本`,recalculateCostsHint:`使用目前耗材價格重新計算所有歸檔成本`,exportStats:`匯出統計`,exportAsCsv:`匯出為 CSV`,exportAsExcel:`匯出為 Excel`,hiddenCount:`{{count}} 個已隱藏`,exportDownloaded:`匯出已下載`,exportFailed:`匯出失敗`,layoutReset:`佈局已重設`,recalculatedCosts:`已為 {{count}} 個歸檔重新計算成本`,recalculateFailed:`重新計算成本失敗`,loadingStats:`載入統計資料中...`,noPermissionResetLayout:`您沒有重設佈局的權限`,noPermissionRecalculate:`您沒有重新計算成本的權限`,noPrintDataInRange:`所選範圍內無列印資料`,periodFilament:`期間耗材`,periodCost:`期間成本`,avgPerPrint:`每次列印平均`,usageOverTime:`隨時間的使用量`,energyOverTime:`隨時間的能耗`,filamentByWeight:`重量`,printDuration:`列印時長`,printerUtilization:`印表機利用率`,filamentSuccess:`按材料成功率`,printHabits:`列印習慣`,printTimeOfDay:`列印時段`,colorDistribution:`顏色分佈`,noColorData:`尚無顏色資料`,records:`紀錄`,longestPrint:`最長列印`,heaviestPrint:`最重列印`,mostExpensivePrint:`最貴列印`,busiestDay:`最忙碌的一天`,successStreak:`連續成功`,streakPrint:`連續列印`,streakPrints:`{{count}} 次連續列印`,printerStats:`印表機統計`,hours:`小時`,avgPrints:`平均列印`,noArchiveData:`尚無列印資料`,filamentByTime:`時間`,avgWeight:`平均重量`,avgTime:`平均時間`,filamentByPrints:`列印次數`,timeframe:{today:`今天`,"this-week":`本週`,"this-month":`本月`,"last-7":`最近 7 天`,"last-30":`最近 30 天`,"last-90":`最近 90 天`,"this-year":`今年`,"all-time":`全部時間`,custom:`自訂範圍`,from:`從`,to:`到`},allUsers:`所有使用者`,noUser:`無使用者（系統）`,filterByUser:`按使用者篩選`},maintenance:{title:`維護`,overview:`概覽`,allOk:`所有維護均已完成`,dueCount:`{{count}} 項到期`,dueCount_plural:`{{count}} 項到期`,warningCount:`{{count}} 個警告`,warningCount_plural:`{{count}} 個警告`,totalPrintTime:`總列印時間`,nextMaintenance:`下次維護`,nothingDue:`無到期項目`,tasks:`任務`,lastPerformed:`上次執行`,interval:`間隔`,hoursRemaining:`剩餘 {{hours}} 小時`,hoursOverdue:`逾期 {{hours}} 小時`,markDone:`標記為完成`,performMaintenance:`執行維護`,history:`歷史`,noHistory:`無維護歷史`,editPrintHours:`編輯列印時間`,currentHours:`目前小時數`,statusTab:`狀態`,settingsTab:`設定`,overdueCount:`{{count}} 個逾期`,dueSoonCount:`{{count}} 個即將到期`,dueSoon:`即將到期`,allGood:`一切正常`,overdueBy:`逾期 {{duration}}`,dueIn:`{{duration}} 後到期`,timeLeft:`剩餘 {{duration}}`,day:`1 天`,days:`{{count}} 天`,week:`1 週`,weeks:`{{count}} 週`,month:`1 個月`,months:`{{count}} 個月`,year:`1 年`,maintenanceTypes:`維護類型`,maintenanceTypesDescription:`系統類型和您的自訂維護任務`,addCustomType:`新增自訂類型`,restoreDefaults:`恢復預設任務`,intervalType:`間隔類型`,intervalValue:`間隔 ({{type}})`,icon:`圖示`,documentationLink:`說明文件連結（可選）`,assignToPrinters:`分配給印表機`,selectAtLeastOnePrinter:`至少選擇一臺印表機`,addType:`新增類型`,custom:`自訂`,printHours:`列印小時數`,calendarDays:`日曆天數`,exampleName:`例如：更換 HEPA 過濾器`,viewDocumentation:`檢視說明文件`,timeBasedInterval:`基於時間的間隔`,intervalOverrides:`間隔覆蓋`,intervalOverridesDescription:`為特定印表機自訂間隔`,assignedToPrinters:`已分配給印表機：`,noPrintersAssigned:`未分配印表機`,addPrinterShort:`新增：`,printersAssignedClick:`已分配 {{count}} 臺印表機 - 點選管理`,removeFromPrinter:`從此印表機移除`,types:{lubricateCarbonRods:`潤滑碳纖維杆`,lubricateRails:`潤滑線性導軌`,cleanNozzle:`清潔噴嘴/熱端`,checkBelts:`檢查皮帶張力`,cleanBuildPlate:`清潔列印板`,checkExtruder:`檢查擠出機齒輪`,checkCooling:`檢查冷卻風扇`,generalInspection:`綜合檢查`,cleanCarbonRods:`清潔碳纖維杆`,lubricateSteelRods:`潤滑鋼杆`,cleanSteelRods:`清潔鋼杆`,cleanLinearRails:`清潔線性導軌`,checkPtfeTube:`檢查 PTFE 管`,replaceHepaFilter:`更換 HEPA 過濾器`,replaceCarbonFilter:`更換活性炭過濾器`,lubricateLeftNozzleRail:`潤滑左噴嘴導軌`},maintenanceComplete:`維護已標記為完成`,typeUpdated:`維護類型已更新`,typeDeleted:`維護類型已刪除`,defaultsRestored:`已恢復 {{count}} 個預設任務`,printHoursUpdated:`列印小時數已更新`,printerAssigned:`印表機已分配`,printerRemoved:`印表機已移除`,deleteTypeConfirm:`刪除"{{name}}"？`,deleteSystemTypeTitle:`刪除預設維護任務？`,deleteSystemTypeMessage:`確定要刪除預設維護任務"{{name}}"嗎？`,noPermissionUpdate:`您沒有更新維護項目的權限`,noPermissionPerform:`您沒有執行維護的權限`,noPermissionEditTypes:`您沒有編輯維護類型的權限`,noPermissionDeleteTypes:`您沒有刪除維護類型的權限`,noPermissionEditHours:`您沒有編輯列印時間的權限`,noPermissionRemovePrinter:`您沒有移除印表機分配的權限`,noPermissionAssignPrinter:`您沒有分配印表機的權限`,noPermissionEditIntervals:`您沒有編輯間隔的權限`,configureSettings:`設定維護類型和間隔`},settings:{sliceEngine:`切片引擎`,sliceEngineSidecar:`伺服器 sidecar`,sliceEngineSidecarHint:`切片在伺服器上的切片 sidecar 容器中執行。`,sliceEngineBrowser:`在瀏覽器中`,sliceEngineBrowserHint:`切片在本裝置上執行，不經過伺服器。`,title:`設定`,general:`通用`,tabs:{general:`通用`,smartPlugs:`智慧插座`,sensors:`感測器`,notifications:`通知`,queue:`工作流程`,queueDispatch:`佇列與分派`,queuePipelines:`管線`,filament:`耗材`,network:`網路`,apiKeys:`API 金鑰`,virtualPrinter:`虛擬印表機`,spoolbuddy:`SpoolBuddy`,failureDetection:`故障檢測`,users:`身份驗證`,backup:`備份`,emailAuth:`信箱認證`,ldap:`LDAP`,twoFa:`雙因素認證`,oidc:`SSO / OIDC`,security:`安全`},spoolbuddy:{infoTitle:`SpoolBuddy 裝置`,infoBody:`SpoolBuddy kiosk 透過心跳自動註冊。如果裝置不再使用，或守護程式當機遺留了過時的重複項，可在此取消註冊。`,duplicatesTitle:`已註冊 {{count}} 台裝置`,duplicatesBody:`kiosk 介面只使用最先註冊的裝置。如果其中有因當機遺留的過時重複項，請取消註冊它——線上裝置會在下次心跳時重新註冊自己。`,empty:`尚未註冊任何 SpoolBuddy 裝置。`,online:`線上`,offline:`離線`,unregister:`取消註冊`,unregisterSuccess:`裝置已取消註冊`,unregisterError:`取消註冊裝置失敗`,confirmTitle:`取消註冊 SpoolBuddy 裝置？`,confirmBody:`將從資料庫中移除 "{{hostname}}" ({{deviceId}})。如果裝置線上，會在下次心跳時重新註冊自己。`,ipAddress:`IP 位址`,firmware:`韌體`,lastSeen:`上次線上`,daemonUptime:`守護程式執行時間`,systemUptime:`系統執行時間`,never:`從未`,nfc:`NFC`,scale:`磅秤`,cpuTemp:`CPU 溫度`,cpuLoad:`CPU 負載`,memory:`記憶體`,disk:`磁碟`,update:`更新`,updateConfirmTitle:`更新 SpoolBuddy 守護程式？`,updateConfirmBody:`對 "{{hostname}}" 觸發軟體更新？更新完成後守護程式將重新啟動。`,restartBrowser:`重新啟動瀏覽器`,restartBrowserConfirmTitle:`重新啟動 kiosk 瀏覽器？`,restartBrowserConfirmBody:`在 "{{hostname}}" 上重新啟動 kiosk 瀏覽器？顯示將短暫黑屏。`,restartDaemon:`重新啟動守護程式`,restartDaemonConfirmTitle:`重新啟動 SpoolBuddy 守護程式？`,restartDaemonConfirmBody:`在 "{{hostname}}" 上重新啟動 SpoolBuddy 守護程式？裝置將離線幾秒鐘。`,reboot:`重新開機`,rebootConfirmTitle:`重新開機？`,rebootConfirmBody:`重新開機 "{{hostname}}"？裝置將離線約一分鐘。`,shutdown:`關機`,shutdownConfirmTitle:`關閉裝置？`,shutdownConfirmBody:`關閉 "{{hostname}}"？您需要實體存取才能重新開機。`,commandConfirm:`確認`,commandQueued:`命令已加入佇列`,commandError:`傳送命令失敗`},ldap:{title:`LDAP 認證`,enabledDesc:`LDAP 認證已啟用`,disabledDesc:`LDAP 認證已停用`,disabledHint:`在下方設定並儲存 LDAP 設定，然後啟用。`,enabled:`LDAP 認證已啟用`,disabled:`LDAP 認證已停用`,feature1:`使用者可以使用 LDAP 憑據登入`,feature2:`本機管理員帳戶作為後備保留`,feature3:`登入時 LDAP 群組對應到 BamBuddy 群組`,serverConfig:`LDAP 伺服器設定`,serverUrl:`伺服器 URL`,serverUrlHint:`使用 ldap:// 進行標準連線或 ldaps:// 進行 SSL 連線`,security:`安全`,securityHint:`StartTLS 將普通連線升級為 TLS。LDAPS 從一開始就使用 TLS。`,bindDn:`繫結 DN（服務帳戶）`,bindPassword:`繫結密碼`,searchBase:`搜尋基礎 DN`,userFilter:`使用者搜尋過濾器`,userFilterHint:`{username} 替換為登入使用者名稱。OpenLDAP 使用 (uid={username})。`,advanced:`進階`,autoProvision:`自動建立使用者`,autoProvisionHint:`首次 LDAP 登入時自動建立 BamBuddy 帳戶`,defaultGroup:`預設群組`,defaultGroupNone:`— 無（無復原）—`,defaultGroupHint:`當 LDAP 使用者透過身份驗證但不在任何已對應的 LDAP 群組中時分配的備援群組。留空以使未對應的使用者沒有權限。`,groupMapping:`群組對應（JSON）`,groupMappingHint:`將 LDAP 群組 DN 對應到 BamBuddy 群組。可用群組：`,testConnection:`測試連線`,settingsSaved:`LDAP 設定已儲存`,errors:{serverRequired:`LDAP 伺服器 URL 為必填項`,searchBaseRequired:`搜尋基礎 DN 為必填項`,enableAuthFirst:`請先啟用認證`,configureLdapFirst:`請先儲存 LDAP 設定`}},email:{smtpSettings:`SMTP 設定`,smtpHost:`SMTP 伺服器`,smtpPort:`SMTP 連接埠`,security:`安全`,authentication:`認證`,username:`使用者名稱`,password:`密碼`,fromEmail:`寄件信箱`,fromName:`寄件人名稱`,testConnection:`測試 SMTP 連線`,testRecipient:`測試收件信箱`,sendTest:`傳送測試郵件`,sending:`傳送中...`,save:`儲存設定`,saving:`儲存中...`,advancedAuth:`進階認證`,advancedAuthEnabled:`進階認證已啟用`,advancedAuthEnabledDesc:`基於信箱的使用者管理功能已啟用。新使用者將透過郵件收到自動產生的密碼，使用者可以透過忘記密碼功能重設密碼。`,advancedAuthDisabled:`進階認證已停用`,advancedAuthDisabledDesc:`啟用進階認證以啟用基於信箱的使用者管理功能。`,enable:`啟用`,disable:`停用`,feature1:`密碼自動產生並透過郵件傳送給新使用者`,feature2:`使用者可以使用使用者名稱或信箱登入`,feature3:`忘記密碼功能可用`,feature4:`管理員可以透過郵件重設使用者密碼`,errors:{requiredFields:`請填寫所有必填欄位`,usernameRequired:`啟用認證時需要使用者名稱`,enterTestEmail:`請輸入測試信箱地址`,smtpServerAndEmail:`測試前請填寫 SMTP 伺服器和寄件信箱`,usernamePasswordRequired:`啟用認證時需要使用者名稱和密碼`,configureSmtpFirst:`請先設定並測試 SMTP 設定`,enableAuthFirst:`請先啟用身份驗證才能使用基於電子郵件的功能。`},success:{settingsSaved:`SMTP 設定儲存成功`},securityOptions:{starttls:`STARTTLS（連接埠 587）`,ssl:`SSL/TLS（連接埠 465）`,none:`無（連接埠 25）`},authOptions:{enabled:`已啟用`,disabled:`已停用`}},appearance:`外觀`,notifications:`通知`,smartPlugs:`智慧插座`,spoolman:`Spoolman`,updates:`更新`,language:`語言`,languageDescription:`選擇您的首選語言`,theme:`主題`,themeLight:`淺色`,themeDark:`深色`,themeSystem:`跟隨系統`,defaultView:`預設檢視`,defaultViewDescription:`開啟應用程式時顯示的頁面`,checkForUpdates:`檢查更新`,autoUpdate:`自動更新`,currentVersion:`目前版本`,latestVersion:`最新版本`,upToDate:`已是最新版本`,updateAvailable:`有可用更新`,notificationLanguage:`通知語言`,notificationLanguageDescription:`推送通知的語言`,bedCooledThreshold:`熱床冷卻閾值`,bedCooledThresholdDescription:`列印後熱床被視為已冷卻的溫度`,userNotificationsEnabled:`使用者通知`,userNotificationsEnabledDescription:`啟用使用者通知選單和列印任務事件的郵件通知。需要進階身份驗證。`,userNotificationsDisabledHint:`請啟用進階身份驗證以使用使用者通知。`,notificationProviders:`通知提供者`,addProvider:`新增提供者`,editProvider:`編輯提供者`,providerType:`提供者類型`,testNotification:`測試通知`,testSuccess:`測試通知傳送成功`,testFailed:`傳送測試通知失敗`,quietHours:`免打擾時間`,quietHoursDescription:`在此時間段內不傳送通知`,quietHoursStart:`開始`,quietHoursEnd:`結束`,events:{title:`通知事件`,printStart:`列印開始`,printComplete:`列印完成`,printFailed:`列印失敗`,printStopped:`列印停止`,printProgress:`進度里程碑`,printProgressDescription:`在 25%、50%、75% 時通知`,printerOffline:`印表機離線`,printerError:`印表機錯誤`,filamentLow:`耗材不足`,maintenanceDue:`維護到期`,maintenanceDueDescription:`需要維護時通知`},smartPlug:{title:`智慧插座`,add:`新增智慧插座`,edit:`編輯智慧插座`,name:`名稱`,ipAddress:`IP 位址`,linkedPrinter:`連結印表機`,autoOn:`自動開啟`,autoOnDescription:`列印開始時開啟`,autoOff:`自動關閉`,autoOffDescription:`列印完成後關閉`,offDelay:`關閉延遲`,offDelayMinutes:`列印後分鐘數`,offDelayTemp:`當噴嘴溫度低於`,currentState:`目前狀態`,turnOn:`開啟`,turnOff:`關閉`},filamentTracking:`耗材追蹤`,filamentTrackingDesc:`選擇如何追蹤您的耗材。您可以使用內建庫存或連線外部 Spoolman 伺服器。`,autoAddUnknownRfid:`自動新增未知 RFID 料盤`,autoAddUnknownRfidDesc:`偵測到具有未知 RFID 標籤的料盤時，自動建立庫存項目。如果您手動預先註冊新料盤以避免重複，請關閉此項。`,filamentChecks:`耗材檢查`,disableFilamentWarnings:`停用耗材警告`,disableFilamentWarningsDesc:`在列印或加入佇列時不顯示耗材不足警告`,preferLowestFilament:`優先使用剩餘最少的耗材`,preferLowestFilamentDesc:`當多個料盤匹配時，使用剩餘耗材最少的那個`,preferLowestFilamentBackupNote:`僅當印表機端啟用了 AMS 備用料盤時才生效——否則當選中的料盤耗盡時，印表機無法切換到備用料盤。`,trackingModeBuiltIn:`內建庫存`,trackingModeBuiltInDesc:`包含 RFID 自動匹配和用量追蹤`,trackingModeSpoolmanDesc:`外部耗材管理伺服器`,builtInFeatureRfid:`自動檢測 AMS 中的拓竹 RFID 耗材`,builtInFeatureUsage:`追蹤每次列印的耗材消耗`,builtInFeatureCatalog:`管理耗材、顏色和 K 值設定檔案`,builtInFeatureThirdParty:`第三方耗材可分配到庫存耗材`,amsSyncButton:`從 AMS 同步重量`,amsSyncTitle:`從 AMS 同步耗材重量`,amsSyncMessage:`這將使用已連線印表機的目前 AMS 剩餘百分比值覆蓋所有庫存耗材重量。用於從損壞的重量資料中恢復。印表機必須線上。`,amsSyncing:`同步中...`,amsSyncSuccess:`已同步 {{synced}} 個耗材，跳過 {{skipped}} 個`,amsSyncError:`從 AMS 同步重量失敗`,spoolmanAmsSyncButton:`從 AMS 同步 Spoolman 重量`,spoolmanAmsSyncTitle:`從 AMS 同步 Spoolman 耗材重量`,spoolmanAmsSyncMessage:`這將根據已連線印表機的目前 AMS 剩餘百分比值更新所有 Spoolman 耗材重量。印表機必須線上。`,spoolmanAmsSyncing:`同步中...`,spoolmanAmsSyncSuccess:`已同步 {{synced}} 個 Spoolman 耗材，跳過 {{skipped}} 個`,spoolmanAmsSyncError:`從 AMS 同步 Spoolman 重量失敗`,spoolmanAmsSyncErrorUnreachable:`同步失敗（Spoolman 無法存取）`,spoolmanAmsSyncErrorNotConfigured:`同步失敗（Spoolman 未設定）`,spoolmanNotConfigured:`Spoolman 未設定`,spoolmanFilamentCatalogTitle:`Spoolman 耗材目錄`,spoolmanFilamentCatalogDesc:`來自 Spoolman 的耗材名稱和皮重。名稱和線軸重量可在此處編輯；其他屬性請直接在 Spoolman 中管理。`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`Spoolman 伺服器的 URL（例如 http://localhost:7912）`,spoolmanConnected:`已連線`,spoolmanDisconnected:`未連線`,status:`狀態`,connect:`連線`,disconnect:`斷開`,howSyncWorks:`同步工作原理`,syncInfoRfidOnly:`僅同步帶有 RFID 的官方拓竹耗材`,syncInfoAutoCreate:`首次同步時自動在 Spoolman 中建立新耗材`,syncInfoThirdPartySkipped:`非拓竹耗材（第三方、重新填充的）將被跳過`,linkingExistingSpools:`連結現有耗材`,linkingExistingSpoolsDesc:`要將現有的 Spoolman 耗材連結到您的 AMS，請將滑鼠懸停在 AMS 槽位上並點選"連結到 Spoolman"。`,syncMode:`同步模式`,syncModeAuto:`自動`,syncModeManual:`僅手動`,syncModeAutoDesc:`偵測到更改時自動同步 AMS 資料`,syncModeManualDesc:`僅在手動觸發時同步`,syncAmsData:`同步 AMS 資料`,syncAmsDataDesc:`手動將印表機 AMS 資料同步到 Spoolman`,allPrinters:`所有印表機`,noDefaultPrinter:`無預設（每次詢問）`,sidebarOrder:`側邊欄順序`,saveThumbnails:`儲存縮圖`,captureFinishPhoto:`拍攝完成照片`,noPrintersConfigured:`未設定印表機`,archiveMode:{always:`始終建立歸檔條目`,never:`從不建立歸檔條目`,ask:`每次詢問`},checkForUpdatesLabel:`檢查更新`,checkPrinterFirmware:`檢查印表機韌體`,includeBetaUpdates:`包含測試版本`,includeBetaUpdatesDesc:`檢查更新時通知測試版和預發布版本`,localLogin:{disable:`停用本機使用者名稱／密碼登入`,disableHint:`啟用後，只能透過SSO提供者登入。LDAP不受影響。在伺服器上設定 BAMBUDDY_LOCAL_LOGIN=true 可保留復原途徑。`},enableRetry:`啟用重試`,homeAssistantDescription:`透過 Home Assistant 控制智慧插座`,environmentManagedLabel:`（環境變數管理）`,autoEnabledViaEnv:`透過環境變數自動啟用`,urlFromEnvReadOnly:`值由 HA_URL 環境變數設定（只讀）`,tokenFromEnvReadOnly:`值由 HA_TOKEN 環境變數設定（只讀）`,mqttConnectedTo:`已連線到`,prometheusDescription:`以 Prometheus 格式暴露印表機資料`,noSmartPlugsTitle:`未設定智慧插座`,noSmartPlugsDescription:`新增基於 Tasmota 的智慧插座以追蹤能耗並自動化電源控制。`,noProvidersTitle:`未設定提供者`,noProvidersDescription:`新增提供者以接收警報。`,noTemplatesAvailable:`無可用範本。重新啟動後端以載入預設範本。`,apiPermissionView:`檢視印表機狀態和佇列`,apiPermissionEdit:`新增和移除列印佇列中的項目`,apiKeysEmptyTitle:`無 API 金鑰`,apiKeysEmptyDescription:`建立 API 金鑰以與外部服務整合。`,noUsersFound:`未找到使用者`,noGroupsFound:`未找到群組`,noGroupsAvailable:`無可用群組`,passwordsDoNotMatch:`密碼不符`,systemGroupWarning:`系統群組名稱不可更改`,authDisabledTitle:`身份驗證已停用`,authDisabledFeature1:`需要登入才能存取系統`,authDisabledFeature2:`建立多個使用者並基於群組的權限管理`,authDisabledFeature3:`使用 50+ 個細粒度權限控制存取`,userHasCreated:`此使用者已建立：`,userItemsQuestion:`您想如何處理這些項目？`,deleteUserConfirm:`確定要刪除此使用者嗎？`,actionCannotBeUndone:`此操作無法復原。`,addFirstSmartPlug:`新增您的第一個智慧插座`,providers:`提供者`,log:`日誌`,testAll:`全部測試`,testResults:`測試結果`,testPassedCount:`{{count}} 個透過`,testFailedCount:`{{count}} 個失敗`,messageTemplates:`訊息範本`,messageTemplatesDescription:`自訂每個事件的通知訊息。`,apiKeys:`API 金鑰`,apiKeysDescription:`建立 API 金鑰用於外部整合和 Webhook。`,createKey:`建立金鑰`,apiKeyCreated:`API 金鑰建立成功`,apiKeyCopyWarning:`請立即複製此金鑰 - 它不會再次顯示！`,useInApiBrowser:`在 API 瀏覽器中使用`,apiKeyQrButton:`二維碼`,apiKeyQrTitle:`掃碼設定`,apiKeyQrCaption:`使用手機應用程式掃描以新增此伺服器和 API 金鑰。`,apiKeyQrWarning:`包含您的機密 API 金鑰——請勿在他人可見的地方分享或截圖。`,createNewApiKey:`建立新 API 金鑰`,keyName:`金鑰名稱`,keyNamePlaceholder:`例如：Home Assistant、OctoPrint`,readStatus:`讀取狀態`,readStatusDescription:`檢視印表機狀態、佇列、資料庫、封存和切片機管線`,manageQueue:`管理佇列`,manageQueueDescription:`新增和移除列印佇列中的項目。搭配「管理資料庫」可執行切片機管線`,controlPrinter:`控制印表機`,controlPrinterDescription:`暫停、繼續和停止列印`,manageLibrary:`管理資料庫`,manageLibraryDescription:`上傳、重新命名、刪除與切片資料庫檔案；從 MakerWorld 匯入模型。搭配「管理佇列」可執行切片機管線`,manageInventory:`管理庫存`,manageInventoryDescription:`建立、更新與刪除耗材盤與庫存記錄。SpoolBuddy 終端（NFC 掃描、秤讀取、終端系統指令）需要此權限。`,manageMaintenance:`管理維護`,manageMaintenanceDescription:`記錄已完成的維護、重設計數器、編輯間隔並管理維護類型目錄。適用於在不授予更廣泛印表機控制權限的情況下記錄「我清潔了噴嘴」的 Home Assistant 自動化。`,manageArchives:`管理列印封存`,manageArchivesDescription:`編輯和刪除列印封存，包括移除舊的列印及其統計資料貢獻。適用於精簡列印歷史的自動化。`,manageProjects:`管理專案`,manageProjectsDescription:`建立、更新和刪除專案，並向其新增封存。適用於將列印整理到專案中的自動化。`,maintenanceBadge:`維護`,archivesBadge:`封存`,projectsBadge:`專案`,libraryBadge:`資料庫`,inventoryBadge:`庫存`,cloudAccess:`允許雲端存取`,cloudAccessDescription:`代表您讀取 Bambu Cloud 預設和耗材。需要登入 Bambu Cloud。`,cloudBadge:`雲端`,updateEnergyCost:`更新電價`,updateEnergyCostDescription:`允許此金鑰向 /settings/electricity-price POST 新的每千瓦時電價。適用於 Home Assistant 動態電價自動化（Tibber、Octopus 等）。這是唯一可透過 API 金鑰寫入的設定欄位。`,energyCostBadge:`能耗`,legacyKey:`舊版`,legacyKeyTooltip:`在按使用者所有權之前建立；需重建以使用雲端存取`,unnamedKey:`未命名金鑰`,lastUsed:`上次使用`,read:`讀取`,control:`控制`,createFirstKey:`建立您的第一個金鑰`,webhookEndpoints:`Webhook 端點`,webhookApiKeyHint:`在 X-API-Key 請求頭中使用您的 API 金鑰。`,webhook:{getAllStatus:`獲取所有印表機狀態`,getSpecificStatus:`獲取特定印表機狀態`,addToQueue:`新增到列印佇列`,pausePrint:`暫停列印`,resumePrint:`繼續列印`,stopPrint:`停止列印`},apiBrowser:`API 瀏覽器`,apiBrowserDescription:`瀏覽和測試所有可用的 API 端點。`,apiKeyForTesting:`測試用 API 金鑰`,apiKeyPlaceholder:`在此貼上您的 API 金鑰以測試需要認證的端點...`,apiKeyHint:`此金鑰將作為 X-API-Key 請求頭隨請求傳送。`,deleteApiKeyTitle:`刪除 API 金鑰`,deleteApiKeyMessage:`確定要刪除此 API 金鑰嗎？使用此金鑰的所有整合將停止工作。`,deleteKey:`刪除金鑰`,amsDisplayThresholds:`AMS 顯示閾值`,amsThresholdsDescription:`設定 AMS 濕度和溫度指示器的顏色閾值。`,humidity:`濕度`,goodGreen:`良好（綠色）`,fairOrange:`一般（橙色）`,aboveFairBad:`超過一般閾值顯示為紅色（差）`,fairAlsoDryingThreshold:`此閾值也用於觸發自動乾燥`,fairBelowDryingFloor:`自動乾燥無法達到此值：AMS 在加熱時讀數為 {{floor}}% 或更高，因此每個週期都會結束並立即重新開始。若使用自動乾燥，請將其設為高於 {{floor}}%。`,temperature:`溫度`,goodBlue:`良好（藍色）`,aboveFairHot:`超過一般閾值顯示為紅色（熱）`,tempAlarmThreshold:`警報閾值`,tempAlarmSeparateFromBand:`只有警報閾值會發送通知，良好與一般僅用於顯示配色。留空則與先前一致，在一般閾值觸發警報。`,tempAlarmMustBePositive:`小於或等於 0 的閾值將被忽略，警報改用一般閾值。`,historyRetention:`歷史保留`,keepSensorHistory:`保留感測器歷史`,historyRetentionDescription:`較舊的濕度和溫度資料將被自動刪除`,defaultPrintOptions:`預設列印選項`,defaultPrintOptionsDescription:`設定新列印的預設選項值。可在列印對話方塊中逐次覆蓋。`,defaultBedLevelling:`熱床調平`,defaultBedLevellingDesc:`列印前自動調平熱床`,defaultFlowCali:`流量校準`,defaultFlowCaliDesc:`校準擠出流量`,defaultVibrationCali:`振動校準`,defaultVibrationCaliDesc:`減少振紋偽影`,defaultLayerInspect:`首層檢測`,defaultLayerInspectDesc:`AI首層檢測`,defaultTimelapse:`縮時攝影`,defaultTimelapseDesc:`錄製縮時攝影影片`,defaultNozzleOffsetCali:`噴嘴偏移校準`,defaultNozzleOffsetCaliDesc:`校準兩個擠出機之間的噴嘴偏移`,tempFanPresetsTitle:`溫度與風扇預設`,tempFanPresetsDescription:`自訂印表機卡片溫度和風扇速度彈出視窗中顯示的快速選擇值。「關閉」按鈕始終顯示。`,tempFanPresetsNozzle:`噴嘴溫度`,tempFanPresetsBed:`熱床溫度`,tempFanPresetsChamber:`腔室溫度`,tempFanPresetsFan:`風扇速度`,tempFanPresetsReset:`還原預設值`,concurrentUploadsTitle:`並行上傳`,concurrentUploadsDescription:`佇列可同時向多少台印表機傳送檔案。印表機接收檔案的速度很慢（大型列印可能需要數分鐘），而且每台都得排隊等候——因此在印表機較多時，調高此值可避免批次中最後一台印表機等完前面所有傳輸。若網路或 Bambuddy 主機難以負荷並行傳輸，請調低此值。`,concurrentUploadsLabel:`同時上傳的印表機數量`,concurrentUploadsHelp:`設為 1 時一次只傳送給一台印表機（舊行為）。預設值為 4。`,staggeredStart:`錯開啟動`,staggeredStartDescription:`多台印表機批次啟動時的預設群組大小與間隔。可在列印對話框中逐批覆寫。`,preheatTitle:`預熱與熱保溫`,preheatDescription:`在每個佇列列印開始前預熱熱床（如支援則包含腔體）並維持溫度。對於沒有腔體主動加熱的印表機使用工程材料（PA、ABS）相當有用 — 保溫計時進行時，熱床透過輻射溫暖腔體。熱床目標溫度從列印檔案讀取；腔體行為取決於印表機型號。`,preheatEnabled:`啟用預熱與保溫`,preheatEnabledDesc:`關閉時，佇列列印立即開始。每個佇列項目可依單次列印覆寫。`,preheatFilamentTargetsLabel:`依耗材的腔體目標 (°C)`,preheatFilamentTargetsHint:`Bambuddy 在已裝入的 AMS 槽位中挑選最高目標；所有槽位都推導為 0 的列印（PLA、PETG、TPU、PVA）會完全跳過預熱並立即開始。`,preheatFilamentTargetsReset:`重設為預設值`,preheatFilamentTargetsDefaultRow:`其他 / 未對應`,preheatMaxWait:`最長等待（秒）`,preheatMaxWaitHelp:`進入保溫階段前的腔體預熱階段上限。`,preheatSoak:`保溫（秒）`,preheatSoakHelp:`達到目標或最長等待結束後的維持時間。`,preheatHardwareTitle:`依印表機的行為：`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E 透過 M141 主動加熱腔體。X1C/P2S 讀取腔體溫度但僅靠熱床輻射加熱。P1S/P1P/A1/A1 Mini 無腔體感測器 — 僅保溫計時器生效。`,preheatPerItemDesc:`在本次列印開始前預熱熱床與腔體。預設使用設定 → 工作流程的全域開關。`,preheatOverride_inherit:`繼承`,preheatOverride_on:`開啟`,preheatOverride_off:`關閉`,calibrationMode_off:`關閉`,calibrationMode_on:`開啟`,calibrationMode_auto:`自動`,preheatTargetOverride:`覆寫腔體目標 (°C，留空使用耗材預設)`,preheatTargetOverrideHelp:`0 表示只加熱熱床並執行保溫，不加熱腔體。留空時，不需要腔體加熱的列印會完全跳過預熱。`,plateClear:`熱床清空確認`,requirePlateClear:`需要熱床清空確認`,requirePlateClearDescription:`啟用後，排程器會在已完成列印的印表機上啟動佇列列印之前，等待每臺印表機的熱床清空確認。停用後，也會隱藏印表機卡片上的列印板狀態標記和「將列印板標記為已清理」按鈕。`,keepBedWarm:`在列印之間保持熱床溫度`,keepBedWarmDesc:`在等待列印板清空確認時，將熱床維持在下方設定的保溫溫度，使腔室保持溫熱；若下一個任務的熱床溫度更高，則使用該溫度。僅在下一次列印需要腔室加熱（ASA、ABS、PA、PC 等）時適用。需要啟用列印板清空確認。`,keepWarmBedTemp:`保溫熱床溫度 (°C)`,keepWarmBedTempHelp:`當熱床用於加熱腔室時使用：包括保溫期間，以及列印檔案未包含熱床溫度時的預熱。列印檔案中較高的熱床溫度一律優先。`,keepWarmMaxMinutes:`停止保溫的時間（分鐘）`,keepWarmMaxMinutesHelp:`若在此時間內未清空列印板，加熱器將關閉，而不是無限期保持加熱。`,gcodeInjection:`G-code注入`,gcodeInjectionDescription:`為Farmloop、SwapMod、AutoClear和Printflow 3D等自動列印系統設定自訂G-code，在列印開始和/或結束時注入。程式碼片段按印表機型號設定，在佇列項目上啟用"注入G-code"時套用。`,gcodeInjectionNoPrinters:`未找到印表機。新增印表機以設定G-code程式碼片段。`,gcodeStartLabel:`開始G-code`,gcodeEndLabel:`結束G-code`,gcodeStartPlaceholder:`在列印開始前插入的G-code...`,gcodeEndPlaceholder:`在列印結束後追加的G-code...`,staggerGroupSize:`群組大小`,staggerGroupSizeHelp:`每個群組要同時啟動的印表機數量`,staggerInterval:`間隔（分鐘）`,staggerIntervalHelp:`每個群組啟動之間的延遲`,queueDrying:`自動乾燥`,queueDryingDescription:`在佇列列印之間，印表機空閒時自動乾燥AMS耗材。使用上方的濕度閾值觸發乾燥。`,queueDryingEnabled:`啟用自動乾燥`,queueDryingEnabledDescription:`當印表機空閒且濕度超過閾值時，自動啟動AMS乾燥`,queueDryingBlock:`等待乾燥完成`,queueDryingBlockDescription:`阻止列印佇列直到乾燥完成。關閉時，列印優先於乾燥。`,ambientDryingEnabled:`環境乾燥`,ambientDryingEnabledDescription:`當空閒印表機的濕度超過閾值時自動乾燥耗材，無需佇列列印。`,printDryingEnabled:`列印時繼續乾燥`,printDryingEnabledDescription:`允許自動乾燥在支援的硬體（H2D、H2C、H2S、P2S、H2D Pro、X2D、X1C、A2L 最新韌體）列印過程中繼續執行。為保護料盤，乾燥溫度會自動比閒置時的預設低 5°C。`,dryingPresets:`乾燥預設`,dryingPresetsDescription:`每種耗材類型的溫度和時長。AMS 2 Pro使用較低溫度，AMS-HT支援較高溫度。`,dryingFilament:`耗材`,humidityThresholds:`濕度閾值`,humidityThresholdsDescription:`依耗材類型設定自動乾燥與警報的濕度觸發值。同一 AMS 混載時採用最低閾值。`,humidityThresholdCol:`閾值`,humidityThresholdDefault:`預設（未知類型）`,printModal:`列印對話方塊`,expandCustomMapping:`預設展開自訂對應`,expandCustomMappingDescription:`列印到多臺印表機時，預設展開顯示每臺印表機的 AMS 對應`,authentication:`身份驗證`,authEnabledDescription:`您的實例已透過使用者身份驗證保護`,authDisabledDescription:`啟用以要求登入並管理使用者存取`,authDisabledMessage:`啟用身份驗證以建立使用者帳戶、管理權限並保護您的 Bambuddy 實例。`,enableAuthentication:`啟用身份驗證`,currentUser:`目前使用者`,changePassword:`修改密碼`,admin:`管理員`,users:`使用者`,addUser:`新增使用者`,groups:`群組`,addGroup:`新增群組`,system:`系統`,noDescription:`無描述`,userCount:`{{count}} 個使用者`,permissionCount:`{{count}} 個權限`,createUser:`建立使用者`,username:`使用者名稱`,enterUsername:`輸入使用者名稱`,password:`密碼`,enterPassword:`輸入密碼`,passwordRequirements:`至少 8 個字元，包含一個大寫、一個小寫、一個數字和一個特殊字元。`,confirmPassword:`確認密碼`,confirmPasswordPlaceholder:`確認密碼`,viewReleaseOnGitHub:`在 GitHub 上檢視發布`,turnAllPlugsOn:`開啟所有插座`,turnAllPlugsOff:`關閉所有插座`,clearNotificationLogs:`清除通知日誌`,clearLogsMessage:`這將永久刪除所有 30 天前的通知日誌。此操作無法復原。`,clearLogs:`清除日誌`,resetUiPreferences:`重設 UI 偏好`,resetUiPreferencesMessage:`這將重設所有 UI 偏好為預設值：側邊欄順序、主題、儀表板佈局、檢視模式和排序偏好。您的印表機、歸檔和伺服器設定不會受到影響。清除後頁面將重新載入。`,resetPreferences:`重設偏好`,deleteGroupTitle:`刪除群組`,deleteGroupMessage:`確定要刪除此群組嗎？此群組中的使用者將失去這些權限。`,deleteGroup:`刪除群組`,disableAuthenticationTitle:`停用身份驗證`,disableAuthenticationMessage:`確定要停用身份驗證嗎？這將使您的 Bambuddy 實例無需登入即可存取。所有使用者將保留在資料庫中但身份驗證將被停用。`,disableAuthentication:`停用身份驗證`,configureBambuddy:`設定 Bambuddy`,systemDefault:`系統預設`,archiveSettings:`歸檔設定`,newWindow:`新視窗`,embeddedOverlay:`嵌入式疊加層`,preferredSlicer:`首選切片軟體`,preferredSlicerDescription:`透過 API 邊車進行應用內切片所使用的切片軟體`,openInSlicerLabel:`在切片軟體中開啟`,openInSlicerInherit:`與 API 切片軟體相同`,openInSlicerDescription:`「在切片軟體中開啟」按鈕使用的桌面切片軟體。保持「與 API 切片軟體相同」以繼承設定，或選擇不同的切片軟體以供本地使用。`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev 存在已知 CLI 錯誤，無法切片許多 Bambu 建立的 3MF — 見上游 issue #12426（繪製的多擠出機檔案 segfault）和 #13386（參數範圍嚴格驗證拒絕）。在上游修復發布之前，推薦使用 Bambu Studio。`,useSlicerApi:`使用切片器 API`,useSlicerApiDescription:`開啟時，「切片」操作開啟應用程式內切片器對話框並呼叫 slicer-API sidecar。關閉時（預設），透過 URI 方案交給桌面切片器。`,slicerCard:`切片器`,orcaslicerApiUrl:`OrcaSlicer sidecar URL`,bambuStudioApiUrl:`Bambu Studio sidecar URL`,slicerStallTimeout:`切片器停滯逾時（分鐘）`,slicerStallTimeoutDescription:`若 sidecar 在此時長內沒有任何進度，則放棄本次切片。持續回報進度的複雜模型無論耗時多久都不會被中斷。不回報進度的 sidecar 則將此值作為總時長上限。`,slicerApiUrlDescription:`slicer-API sidecar 容器的 URL。留空以使用 SLICER_API_URL / BAMBU_STUDIO_API_URL 環境變數預設值。`,externalCameras:`外部攝影機`,costTracking:`成本追蹤`,printsOnly:`僅列印`,totalConsumption:`總消耗`,dataManagement:`資料管理`,storageUsage:`儲存使用情況`,storageUsageDescription:`按類別的資料使用情況明細`,storageUsageTotal:`總計`,storageUsageErrors:`錯誤`,storageUsageOtherBreakdown:`其他（包括靜態資源、腳本和設定檔案）`,storageUsageSystem:`系統`,storageUsageData:`資料`,storageUsageUnavailable:`儲存使用資訊不可用`,clearNotificationLogsDescription:`刪除 30 天前的通知日誌`,resetUiPreferencesDescription:`重設側邊欄順序、主題、檢視模式和佈局偏好。印表機、歸檔和設定不受影響。`,enableHomeAssistant:`啟用 Home Assistant`,enableMqtt:`啟用 MQTT`,useTls:`使用 TLS`,enableMetricsEndpoint:`啟用指標端點`,availableMetrics:`可用指標`,billingEnabled:`啟用帳單`,billingEnabledDescription:`向用戶收取列印費用並啟用財務功能`,printerKillSwitch:`列印機緊急停止開關`,printerKillSwitchDescription:`立即停止未經授權的列印`,financeBudgetReset:`財務預算月度重置`,financeBudgetResetDay:`重置日期`,financeBudgetResetDayHelp:`對於少數月份，重置使用該月的最後一天。`,financeBudgetResetTimezone:`重置時區`,financeBudgetResetTimezoneHelp:`預算視窗的開始時間在此時區計算。`,rebuildLedger:`重建錢包帳本`,rebuildLedgerStarted:`錢包帳本重建已啟動`,rebuildLedgerConfirmTitle:`重建錢包帳本?`,rebuildLedgerConfirmMessage:`這將重建錢包帳本以修復歷史餘額值。僅在您知道自己在做什麼時才執行此操作。`,rebuildLedgerInProgress:`正在啟動重建...`,editUser:`編輯使用者`,deleteUserTitle:`刪除使用者`,groupName:`群組名稱`,leaveEmptyForAnonymous:`留空為匿名`,leaveEmptyForNoAuth:`留空為無認證`,enterNewPassword:`輸入新密碼`,confirmNewPassword:`確認新密碼`,enterGroupName:`輸入群組名稱`,enterDescriptionOptional:`輸入描述（可選）`,enterCurrentPassword:`輸入目前密碼`,enterNewPasswordMin6:`輸入新密碼（至少 6 個字元）`,toast:{keyCopied:`金鑰已複製到剪貼簿`,copyFailed:`複製金鑰失敗`,keyAddedToBrowser:`金鑰已新增到 API 瀏覽器`,clearLogsFailed:`清除日誌失敗`,uiPreferencesReset:`UI 偏好已重設。重新整理中...`,authDisabled:`身份驗證已成功停用`,authDisableFailed:`停用身份驗證失敗`,apiKeyCreated:`API 金鑰已建立`,apiKeyDeleted:`API 金鑰已刪除`,userCreated:`使用者建立成功`,userUpdated:`使用者更新成功`,userDeleted:`使用者刪除成功`,groupCreated:`群組建立成功`,groupUpdated:`群組更新成功`,groupDeleted:`群組刪除成功`,fillRequiredFields:`請填寫所有必填欄位`,passwordsDoNotMatch:`密碼不符`,passwordTooShort:`密碼至少需要 8 個字元`,passwordNeedsUppercase:`密碼必須至少包含一個大寫字母`,passwordNeedsLowercase:`密碼必須至少包含一個小寫字母`,passwordNeedsDigit:`密碼必須至少包含一個數字`,passwordNeedsSpecial:`密碼必須至少包含一個特殊字元`,enterGroupName:`請輸入群組名稱`,settingsSaved:`設定已儲存`,noPermissionUpdate:`您沒有權限變更設定`,cameraSettingsSaved:`攝影機設定已儲存`,enterCameraUrl:`請輸入攝影機 URL`,passwordChanged:`密碼修改成功`,connectionFailed:`連線失敗`,testFailed:`測試失敗`,cameraConnected:`攝影機已連線{{resolution}}`,cameraConnectedCoalesced:`攝影機已連線{{resolution}}（與進行中的擷取共用）`},testConnection:`測試連線`,catalog:{spoolCatalog:`耗材目錄`,spoolCatalogDescription:`按品牌/類型的空耗材重量。用於新增耗材時的自動重量查詢。`,searchCatalog:`搜尋目錄...`,addNewEntry:`新增新條目`,namePlaceholder:`名稱（例如：Bambu Lab - 塑膠）`,weight:`重量`,type:`類型`,default:`預設`,custom:`自訂`,noMatch:`沒有條目匹配您的搜尋`,empty:`目錄中沒有條目`,deleteEntry:`刪除條目`,deleteConfirm:`確定要刪除"{{name}}"嗎？`,resetCatalog:`重設目錄`,resetConfirm:`重設目錄為預設值？這將移除所有自訂條目。`,loadFailed:`載入耗材目錄失敗`,nameWeightRequired:`名稱和重量為必填項`,entryAdded:`條目已新增`,addFailed:`新增條目失敗`,entryUpdated:`條目已更新`,updateFailed:`更新條目失敗`,entryDeleted:`條目已刪除`,deleteFailed:`刪除條目失敗`,resetSuccess:`目錄已重設為預設值`,resetFailed:`重設目錄失敗`,exported:`已匯出 {{count}} 條`,imported:`已匯入 {{added}} 條（跳過 {{skipped}} 條）`,importFailed:`匯入失敗：無效的 JSON 格式`,exportTooltip:`匯出目錄為 JSON`,importTooltip:`從 JSON 匯入目錄`,resetTooltip:`重設為預設值`,selectedCount:`已選擇 {{count}} 項`,deleteSelected:`刪除所選`,bulkDeleteConfirm:`確定要刪除 {{count}} 個條目嗎？`,bulkDeleted:`已刪除 {{count}} 個條目`,bulkDeleteFailed:`刪除條目失敗`,material:`材料`,spoolWeight:`線軸重量`,color:`顏色`,updateSpoolWeight:`更新線軸重量`,filamentUpdated:`耗材已更新`,filamentUpdateFailed:`更新耗材失敗`,filamentUpdateInvalid:`耗材資料無效`,keepExistingSpoolWeight:`保留現有線軸的舊重量`,keepExistingSpoolWeightDesc:`已使用此耗材類型建立的線軸保留舊的皮重。新線軸使用更新後的值。`,applyToAllSpools:`套用至所有線軸`,applyToAllSpoolsDesc:`此耗材類型的所有重量計算立即使用新的皮重。`},colorCatalog:{title:`顏色目錄`,description:`按製造商/材料的耗材顏色。用於新增耗材時的自動顏色查詢。`,searchColors:`搜尋顏色...`,allManufacturers:`所有製造商`,addNewColor:`新增新顏色`,manufacturer:`製造商`,colorName:`顏色名稱`,hex:`十六進位`,materialOptional:`材料（可選）`,showing:`顯示 {{filtered}} / {{total}} 種顏色`,noMatch:`沒有顏色匹配您的搜尋`,empty:`目錄中沒有顏色`,deleteColor:`刪除顏色`,deleteConfirm:`確定要刪除"{{name}}"嗎？`,resetCatalog:`重設顏色目錄`,resetConfirm:`重設目錄為預設值？這將移除所有自訂顏色。`,sync:`同步`,starting:`啟動中...`,syncTooltip:`從 FilamentColors.xyz 同步（2000+ 種顏色，可能需要一分鐘）`,loadFailed:`載入顏色目錄失敗`,fieldsRequired:`製造商、顏色名稱和十六進位顏色為必填項`,colorAdded:`顏色已新增`,addFailed:`新增顏色失敗`,colorUpdated:`顏色已更新`,updateFailed:`更新顏色失敗`,colorDeleted:`顏色已刪除`,deleteFailed:`刪除顏色失敗`,resetSuccess:`顏色目錄已重設為預設值`,resetFailed:`重設目錄失敗`,syncUpToDate:`已是最新（檢查了 {{count}} 種顏色）`,syncComplete:`新增了 {{added}} 種新顏色（{{skipped}} 種已存在）`,syncError:`同步錯誤`,syncFailed:`從 FilamentColors.xyz 同步失敗`,exported:`已匯出 {{count}} 種顏色`,imported:`已匯入 {{added}} 種顏色（跳過 {{skipped}} 種）`,importFailed:`匯入失敗：無效的 JSON 格式`,selectedCount:`已選擇 {{count}} 項`,deleteSelected:`刪除所選`,bulkDeleteConfirm:`確定要刪除 {{count}} 種顏色嗎？`,bulkDeleted:`已刪除 {{count}} 種顏色`,bulkDeleteFailed:`刪除顏色失敗`},dateFormat:`日期格式`,dateFormatUs:`美式 (MM/DD/YYYY)`,dateFormatEu:`歐式 (DD/MM/YYYY)`,dateFormatIso:`ISO (YYYY-MM-DD)`,timeFormat:`時間格式`,timeFormat12:`12小時制 (3:30 PM)`,timeFormat24:`24小時制 (15:30)`,defaultPrinter:`預設印表機`,defaultPrinterDescription:`為上傳、重印和其他操作預選此印表機。`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`使用側邊欄版面配置重新排序項目、重設可見性並管理自訂連結。`,setDefault:`設為預設`,sidebarOrderSetDefaultHint:`設為預設將目前選單順序套用於尚未自訂的使用者。`,sidebarDefaultSet:`已設定預設選單順序。`,sidebarDefaultCleared:`已清除預設選單順序。`,sidebarDefaultFailed:`設定預設選單順序失敗。`,reset:`重設`,darkMode:`深色模式`,lightMode:`淺色模式`,active:`(目前)`,background:`背景`,accent:`強調色`,style:`樣式`,bgNeutral:`中性`,bgWarm:`暖色`,bgCool:`冷色`,bgOled:`OLED 純黑`,bgSlate:`石板藍`,bgForest:`森林綠`,accentGreen:`綠色`,accentTeal:`青色`,accentBlue:`藍色`,accentOrange:`橙色`,accentPurple:`紫色`,accentRed:`紅色`,styleClassic:`經典`,styleGlow:`發光`,styleVibrant:`鮮豔`,themeToggleHint:`使用側邊欄中的圖示在深色、淺色和系統模式之間切換。`,progressInTitle:`在分頁顯示列印進度`,progressInTitleDescription:`在瀏覽器分頁中顯示目前列印的百分比和進度環。`,autoArchivePrints:`自動歸檔列印`,autoArchiveDescription:`列印完成時自動儲存3MF檔案`,saveThumbnailsDescription:`從3MF檔案中提取並儲存預覽影像`,captureFinishPhotoDescription:`列印完成時從印表機攝影機拍照。Bambuddy 會在列印期間錄製一段短縮時攝影，以便從熱床下降前的瞬間取得照片；如果您為本次列印啟用了縮時攝影，檔案將保留，否則會在拍照完成後自動刪除。`,finishPhotoRestorePlate:`為完成照片抬升熱床`,finishPhotoRestorePlateDescription:`列印結束時印表機會將熱床下降約 100 mm，使完成的模型落在相機取景範圍之下。Bambuddy 會將熱床抬回到最後一層列印高度略上方，拍攝照片後再次下降。若列印高度未知或佇列中還有其他任務，則跳過此步驟。`,ffmpegNotInstalled:`未安裝ffmpeg`,ffmpegRequired:`攝影機捕獲需要ffmpeg。透過 <brew>brew install ffmpeg</brew>（macOS）或 <apt>apt install ffmpeg</apt>（Linux）安裝。`,camera:`攝影機`,cameraViewMode:`攝影機檢視模式`,cameraOverlayDescription:`攝影機在主螢幕上以可調大小的覆蓋層開啟`,cameraWindowDescription:`攝影機在單獨的瀏覽器視窗中開啟`,externalCamerasDescription:`設定外部攝影機以替換內建印表機攝影機。支援MJPEG流、RTSP、HTTP快照和USB攝影機（V4L2）。啟用後，外部攝影機將用於即時檢視和完成照片。`,cameraPlaceholderUsb:`裝置路徑 (/dev/video0)`,cameraPlaceholderUrl:`攝影機URL (rtsp://... 或 http://...)`,cameraTypeMjpeg:`MJPEG 流`,cameraTypeRtsp:`RTSP 流`,cameraTypeSnapshot:`HTTP 快照`,cameraTypeUsb:`USB 攝影機 (V4L2)`,cameraSnapshotUrl:`快照 URL（選用）`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`用於通知縮圖、完成照片、層縮時攝影影格和列印板偵測的單一影格 URL。縮時攝影和列印板偵測各自需要自己的每印表機切換 — 此 URL 只是它們啟用時拉取的影像來源。留空以從上方即時串流擷取。適用於 go2rtc（/api/frame.jpeg）和具有專用快照端點的 IP 攝影機。`,cameraRotation:`旋轉`,test:`測試`,connected:`已連線`,disconnected:`未連線`,currency:`貨幣`,defaultFilamentCost:`預設耗材成本（每公斤）`,electricityCost:`每千瓦時電費`,energyDisplayMode:`能源顯示模式`,energyModePrintDescription:`儀表板顯示列印期間使用的能源總和`,energyModeTotalDescription:`儀表板顯示智慧插座的累計能源`,fileManager:`檔案管理器`,createArchiveEntry:`列印時建立歸檔條目`,createArchiveEntryDescription:`從檔案管理器列印時，可選擇建立歸檔條目`,lowDiskSpaceWarning:`磁碟空間不足警告`,lowDiskSpaceDescription:`當可用磁碟空間低於此閾值時顯示警告`,printerFirmware:`印表機韌體`,checkFirmwareDescription:`檢查Bambu Lab的印表機韌體更新`,bambuddySoftware:`Bambuddy 軟體`,autoCheckDescription:`啟動時自動檢查新版本`,checkNow:`立即檢查`,updateAvailableVersion:`可用更新：v{{version}}`,releaseNotes:`發布說明`,updateViaDocker:`透過 Docker Compose 更新：`,composeDirectory:`Compose 目錄`,composeDirectoryHint:`存放 docker-compose.yml 的目錄。留空則不加入 cd。`,copyUpdateCommand:`複製更新指令`,updateViaHomeAssistant:`更新由 Home Assistant Supervisor 管理。請在 Home Assistant 中開啟 設定 → 附加元件 → Bambuddy 以安裝新版本。`,updateViaWindowsInstaller:`Windows 安裝可透過重新執行安裝程式來更新。請在下方下載新版本 — 您的資料、設定和印表機都會保留。`,downloadWindowsInstaller:`下載 v{{version}} 安裝程式`,installUpdate:`安裝更新`,latestVersionRunning:`您正在執行最新版本`,failedToCheckUpdates:`檢查更新失敗：{{error}}`,backupRestore:`備份與恢復`,backupRestoreDescription:`匯出/匯入設定並設定GitHub 備份`,goToBackup:`前往備份`,externalUrl:`外部URL`,externalUrlDescription:`Bambuddy可存取的外部URL。用於通知影像和外部整合。`,bambuddyUrl:`Bambuddy URL`,externalUrlHint:`包含協定和連接埠（例如：http://192.168.1.100:8000）`,ftpRetry:`FTP重試`,ftpRetryDescription:`當印表機Wi-Fi 不穩定時重試FTP操作。適用於3MF下載、列印上傳、縮時攝影下載和韌體更新。`,autoRetryDescription:`自動重試失敗的FTP操作`,retryAttempts:`重試次數`,retryDelay:`重試延遲`,connectionTimeout:`連線超時`,time_one:`{{count}} 次`,time_other:`{{count}} 次`,second_one:`{{count}} 秒`,second_other:`{{count}} 秒`,nSeconds:`{{count}} 秒`,increaseForWeakWifi:`對Wi-Fi 訊號弱的印表機增加此值`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`連線到Home Assistant，透過HA REST API控制智慧插座。支援switch、light、input_boolean和script實體。`,homeAssistantUrl:`Home Assistant URL`,longLivedAccessToken:`長期存取權杖`,haTokenHint:`在HA中建立權杖：個人資料 → 長期存取權杖 → 建立權杖`,connectionSuccessful:`連線成功`,connectionFailed:`連線失敗`,haConnectionSuccess:`已成功連線到Home Assistant。`,haConnectionFailed:`連線Home Assistant失敗。`,mqttPublishing:`MQTT發布`,mqttDescription:`將BamBuddy事件發布到外部MQTT代理，用於與Node-RED、Home Assistant和其他自動化系統整合。`,mqttEnableDescription:`向外部MQTT代理發布事件`,brokerHostname:`代理主機名稱`,port:`連接埠`,usernameOptional:`使用者名稱（可選）`,passwordOptional:`密碼（可選）`,topicPrefix:`主題前綴`,topicPrefixHint:`主題格式：{{prefix}}/printers/<serial>/status 等`,prometheusMetrics:`Prometheus 指標`,prometheusEndpointDescription:`在 <code>/api/v1/metrics</code> 公開印表機指標，用於Prometheus/Grafana監控。`,bearerTokenOptional:`Bearer權杖（可選）`,bearerTokenHint:`設定後，請求必須包含 <code>Authorization: Bearer <token></code>`,metricsConnectionStatus:`連線狀態`,metricsPrinterState:`印表機狀態（空閒/列印中等）`,metricsPrintProgress:`列印進度 0-100%`,metricsBedTemp:`熱床溫度`,metricsNozzleTemp:`噴嘴溫度`,metricsPrintsTotal:`按結果分類的總列印數`,metricsMore:`...以及更多（層數、風扇、佇列、耗材用量）`,smartPlugsDescription:`連線智慧插座（Tasmota或Home Assistant）以自動化電源控制並追蹤印表機的能源使用情況。`,allOn:`全部開啟`,allOff:`全部關閉`,addSmartPlug:`新增智慧插座`,energySummary:`能源概要`,currentPower:`目前功率`,plugsOnline:`{{reachable}}/{{total}} 個插座線上`,today:`今天`,yesterday:`昨天`,total:`總計`,enablePlugsForSummary:`啟用插座以檢視能源概要`,addNotificationProvider:`新增`,systemBadge:`(系統)`,creating:`建立中...`,changing:`修改中...`,deleteUserAndItems:`刪除使用者及其所有項目`,deleteUserKeepItems:`刪除使用者，保留項目（將變為無主項目）`,ok:`確定`,twoFa:{totpTitle:`身份驗證器 App (TOTP)`,totpDesc:`使用 Google Authenticator、Aegis 或 Authy 等 App。`,emailOtpTitle:`郵件 OTP`,emailOtpDesc:`登入時向 {{email}} 傳送一次性驗證碼。`,emailOtpNoEmail:`請先為帳戶新增信箱地址以啟用此方式。`,addEmailFirst:`您的帳戶沒有信箱地址，請聯絡管理員新增。`,setupTotp:`設定身份驗證器 App`,setupAuthApp:`設定身份驗證器 App`,setupInstructions:`使用身份驗證器 App 掃描QR Code，然後輸入驗證碼確認。`,manualEntry:`無法掃描？請手動輸入此金鑰：`,scannedContinue:`已掃描 — 繼續`,enterCodeToConfirm:`請輸入身份驗證器 App 中的6位驗證碼以確認設定。`,activate:`啟用`,disableTotp:`停用身份驗證器`,disableConfirmHint:`請輸入有效的 TOTP 碼或備用碼來停用身份驗證器。`,totpDisabled:`身份驗證器 App 已停用。`,emailOtpEnabled:`郵件 OTP 已啟用。`,emailOtpDisabled:`郵件 OTP 已停用。`,smtpRequired:`請先設定並測試SMTP設定。`,invalidCode:`無效驗證碼，請重試。`,enableEmailOtp:`啟用郵件 OTP`,disableEmailOtp:`停用郵件 OTP`,emailSetupEnterCode:`驗證碼已傳送至您的信箱地址。請在下方輸入以確認您擁有此信箱。`,verifyAndEnable:`驗證並啟用`,emailDisablePasswordHint:`請輸入您的帳戶密碼以確認停用郵件 OTP。`,passwordPlaceholder:`輸入您的密碼`,backupCodesTitle:`儲存備用碼`,backupCodesWarning:`請將這些碼儲存在安全的地方。每個碼只能使用一次，且不會再次顯示。`,backupCodesRemaining:`剩餘 {{count}} 個備用碼`,savedCodes:`已儲存`,regenBackup:`重新產生備用碼`,regenBackupHint:`輸入目前 TOTP 碼以產生 10 個新備用碼，所有現有備用碼將失效。`,newBackupCodes:`新備用碼`,linkedAccounts:`已連結的 SSO 帳戶`,linkedAccountsDesc:`以下外部身份提供者已與您的帳戶連結。`,oidcUnlinked:`帳戶已解除連結。`},sessionPolicy:{title:`工作階段政策`,description:`新使用者登入的最長工作階段有效期。已發行的權杖會保留其原有的到期時間。`,preset24h:`24 小時`,preset7d:`7 天`,preset30d:`30 天`,customHoursLabel:`自訂工作階段有效期（小時）`,hoursSuffix:`小時`,warning:`較長的工作階段會削弱自動登出保護。僅建議在受信任的單一使用者部署中使用。`},oidc:{title:`SSO / OIDC 提供者`,desc:`設定 OpenID Connect 提供者以實現單點登入。`,addProvider:`新增提供者`,newProvider:`新提供者`,empty:`尚未設定 OIDC 提供者。`,created:`提供者已建立。`,updated:`提供者已更新。`,deleted:`提供者已刪除。`,refreshIcon:`重新整理圖示`,removeIcon:`移除圖示`,iconRefreshed:`圖示已重新整理。`,iconRemoved:`圖示已移除。`,iconFetchFailed:`無法從提供者 URL 取得圖示。`,deleteTitle:`刪除提供者`,deleteMessage:`刪除"{{name}}"？所有連結帳戶將斷開連線。`,form:{name:`顯示名稱`,issuerUrl:`頒發者 URL`,clientId:`客戶端 ID`,clientSecret:`客戶端金鑰`,scopes:`作用域`,iconUrl:`圖示 URL（可選）`,enabled:`已啟用`,autoCreate:`自動建立使用者`,autoCreateDesc:`首次登入時自動建立本機帳戶。`,autoLink:`自動連結已有帳戶`,autoLinkDesc:`首次登入時透過信箱匹配現有本機帳戶並自動連結。`,emailClaim:`電子郵件聲明`,emailClaimDesc:`用作電子郵件身份的 JWT 聲明。Azure Entra ID 請使用 'preferred_username' 或 'upn'（不發送 email_verified）。僅使用可信的聲明名稱。`,emailClaimPlaceholder:`電子郵件`,emailClaimCustomClaimAutoLinkWarning:`自訂宣告僅在值由租用戶管理時（例如 Azure Entra ID 的 upn / preferred_username）對自動關聯安全。如果您的 IdP 允許使用者自我宣告此宣告，請勿啟用自動關聯。`,requireEmailVerified:`要求電子郵件已驗證`,requireEmailVerifiedDesc:`僅在提供商將電子郵件聲明標記為已驗證時才接受。`,requireEmailVerifiedWarning:`警告：將在未經驗證的情況下接受電子郵件。僅對受信任的提供商使用。`,requireEmailVerifiedAutoLink:`請先停用自動連結以變更此設定。`,secretHint:`留空以保留目前`,secretPlaceholder:`新金鑰`,defaultGroup:`預設群組`,defaultGroupDesc:`自動建立使用者時分配的群組。未設定時回退到 Viewers。`,defaultGroupViewersFallback:`Viewers（預設）`,autologin:`自動登入`,autologinDesc:`將未驗證的訪客直接重新導向至此提供者。此旗標僅能由一個提供者持有。`}},encryption:{title:`MFA 加密狀態`,enabledFromEnv:`已啟用靜態加密（金鑰來自 MFA_ENCRYPTION_KEY 環境變數）`,enabledFromFile:`已啟用靜態加密（金鑰從資料目錄載入）`,enabledGenerated:`使用自動產生的金鑰啟用靜態加密`,notConfigured:`未設定靜態加密`,notConfiguredDesc:`TOTP 機密和 OIDC client_secrets 以明文儲存。請設定 MFA_ENCRYPTION_KEY 或使用可寫資料目錄重新啟動 Bambuddy 以自動產生。`,allEncrypted:`所有 MFA 機密皆已靜態加密。`,legacyRowsLabel:`舊版明文列`,encryptedRowsLabel:`已加密列`,legacyRowsWarning:`偵測到 {{count}} 個舊版明文列。請重新儲存 OIDC 供應商或重新註冊使用者的身份驗證器應用程式，以遷移到加密儲存。`,backupHint:`自動產生的金鑰儲存在 DATA_DIR/.mfa_encryption_key 中，並包含在本機備份 ZIP 中。請保護備份安全或顯式設定 MFA_ENCRYPTION_KEY。`,decryptionBrokenTitle:`加密金鑰遺失`,decryptionBrokenError:`無法解密 {{count}} 條加密記錄，因為加密金鑰不再可用。請還原先前的 MFA_ENCRYPTION_KEY 或 DATA_DIR/.mfa_encryption_key 以恢復存取。`,migrationErrorWarning:`{{count}} 行舊資料在啟動時未能重新加密。請檢查伺服器日誌並重新啟動 Bambuddy 以重試。`},pipelineLimits:{title:`切片機管線限制`,maxCopiesLabel:`每次執行最大副本數`,maxCopiesDesc:`操作員執行管線時可請求的副本數上限。伺服器端硬性上限為 1000。`},pipelines:{title:`切片機管線`,subtitle:`可重複使用的預設組合（印表機 + 製程 + 耗材 + 熱床類型）。在切片對話框中儲存一個，下次切片檔案時一鍵套用。`,loading:`正在載入管線…`,loadError:`無法載入管線。`,confirmDelete:`刪除此管線？此操作無法復原。`,staleWarning:`參考的一個或多個預設已不存在。請在切片對話框中重新儲存此管線以修正。`,empty:{title:`尚無管線。`,howto:`為任意檔案開啟切片對話框，選擇印表機 / 製程 / 耗材 / 熱床,然後點擊「另存為管線」。儲存的管線將顯示於此處。`},field:{name:`管線名稱`,description:`描述`,targetPrinter:`目標印表機`,noTarget:`— 無目標 —`,targetKind:`目標類型`,targetKindSpecific:`特定印表機`,targetKindClass:`印表機類別`,targetModelClass:`印表機型號`,fanoutStrategy:`分發策略`,fanout:{max_parallel:`最大並行 — 分發到任何空閒匹配的印表機`,round_robin:`輪替 — 在合格印表機間循環`,fill_one_first:`先填一台 — 將所有副本固定到一台印表機`},fanoutShort:{max_parallel:`並行`,round_robin:`輪替`,fill_one_first:`先填一台`}},action:{save:`儲存`,cancel:`取消`,rename:`重新命名`,delete:`刪除`},slot:{printer:`印表機`,process:`製程`,filament:`耗材`,filamentN:`耗材 {{n}}`,filamentAll:`全部 {{n}} 個槽`,bed:`熱床`},group:{profiles:`設定檔`,filaments:`耗材`},searchPlaceholder:`搜尋管線…`,filterTargetType:`依目標類型篩選`,filterTarget:`依目標篩選`,filter:{all:`全部目標`,noTarget:`未設定目標`,count:`{{shown}} / {{total}}`,noMatches:`沒有管線符合目前的篩選條件。`},toast:{saved:`管線已儲存`,saveFailed:`儲存失敗`,deleted:`管線已刪除`,deleteFailed:`刪除失敗`},noTargetHint:`設定目標印表機以執行`,noTargetWarning:`執行此管線前請先設定目標印表機。`,runs:{lastRun:`上次執行`,status:{queued:`排隊中`,slicing:`切片中`,dispatching:`傳送中`,in_progress:`列印中`,completed:`已完成`,failed:`失敗`,partial_failure:`部分失敗`,cancelled:`已取消`}}}},notification:{printStarted:{title:`列印已開始`,body:`{{printer}}：{{filename}} 已開始列印`},printCompleted:{title:`列印已完成`,body:`{{printer}}：{{filename}} 已成功完成`},printFailed:{title:`列印失敗`,body:`{{printer}}：{{filename}} 列印失敗`},printStopped:{title:`列印已停止`,body:`{{printer}}：{{filename}} 已停止`},printProgress:{title:`列印進度`,body:`{{printer}}：{{filename}} 已完成 {{percent}}%`},printerOffline:{title:`印表機離線`,body:`{{printer}} 已離線`},printerError:{title:`印表機錯誤`,body:`{{printer}}：{{error}}`},filamentLow:{title:`耗材不足`,body:`{{printer}}：耗材即將用完`},maintenanceDue:{title:`維護到期`,body:`{{printer}}：{{items}} 需要關注`}},errors:{generic:`出了點問題`,networkError:`網路錯誤。請檢查您的連線。`,notFound:`未找到`,unauthorized:`未授權`,serverError:`伺服器錯誤`,validationError:`請檢查您的輸入`,printerConnectionFailed:`連線印表機失敗`,saveFailed:`儲存更改失敗`,deleteFailed:`刪除失敗`,loadFailed:`載入資料失敗`},hmsErrors:{title:`錯誤 - {{name}}`,noErrors:`無錯誤`,viewOnWiki:`在拓竹 Wiki 上檢視`,mqttVerifyFailedRemedy:`在印表機上啟用開發者模式，重新啟動印表機，然後重新開始該工作。`,unknownCode:`未知 HMS 代碼 — 詳情請參閱拓竹 Wiki。`,clearInstructions:`在印表機上清除錯誤以在此處消除它們。`,clearErrors:`清除錯誤`,clearSuccess:`HMS 錯誤已清除`,clearFailed:`清除 HMS 錯誤失敗`,actionSuccess:`已向印表機傳送動作`,actionFailed:`動作傳送失敗`,runoutExpectedSlot:`{{ranOut}} 的耗材已用盡。印表機現在正在等待 {{expected}} 裝入相容耗材。請將料卷裝入 {{expected}}，然後選擇「重試」。`,runoutExpectedSlotOnly:`印表機正在等待 {{expected}} 裝入相容耗材。請在該料槽裝入料卷，然後選擇「重試」。`,runoutSlotUnknown:`耗材已用盡，列印已暫停。Bambuddy 無法確定印表機現在需要哪個料槽——請在印表機螢幕上查看所請求的料槽。`,actions:{RESUME_PRINTING:`恢復列印`,RESUME_PRINTING_DEFECTS:`恢復 (瑕疵可接受)`,RESUME_PRINTING_PROBELM_SOLVED:`恢復 (問題已解決)`,STOP_PRINTING:`停止列印`,CHECK_ASSISTANT:`檢視助理`,FILAMENT_EXTRUDED:`已擠出耗材，繼續`,RETRY_FILAMENT_EXTRUDED:`尚未擠出，重試`,CONTINUE:`已完成，繼續`,LOAD_VIRTUAL_TRAY:`載入耗材`,OK_BUTTON:`確定`,FILAMENT_LOAD_RESUME:`耗材已載入，恢復`,JUMP_TO_LIVEVIEW:`檢視即時畫面`,NO_REMINDER_NEXT_TIME:`下次不再提醒`,REFRESH_NOZZLE:`重新檢查`,IGNORE_NO_REMINDER_NEXT_TIME:`忽略，下次不再提醒`,IGNORE_RESUME:`忽略並恢復`,PROBLEM_SOLVED_RESUME:`問題已解決，恢復`,TURN_OFF_FIRE_ALARM:`知道了，關閉火警`,RETRY_PROBLEM_SOLVED:`重試 (問題已解決)`,CANCLE:`取消`,STOP_DRYING:`停止乾燥`,PROCEED:`繼續`,OK_JUMP_RACK:`確定`,ABORT:`中止`,DISABLE_PURIFICATION:`本次列印停用空氣淨化`,DONT_REMIND_NEXT_TIME:`不再提醒`,DBL_CHECK_CANCEL:`取消`,DBL_CHECK_DONE:`完成`,DBL_CHECK_RETRY:`重試`,DBL_CHECK_RESUME:`恢復`,DBL_CHECK_OK:`確認`,REMOVE_CLOSE_BTN:`關閉`}},mqttDebug:{title:`MQTT 偵錯日誌`,searchPlaceholder:`搜尋主題或負載...`,noMessages:`尚未紀錄訊息`,startLoggingHint:`點選"開始紀錄"以開始捕獲 MQTT 訊息`,noMessagesMatch:`沒有訊息匹配您的篩選條件`,adjustFilterHint:`嘗試調整您的搜尋或篩選條件`,incoming:`傳入`,outgoing:`傳出`,loggingStopped:`紀錄已停止`,loggingActive:`紀錄中 - 訊息將自動重新整理`,startLogging:`開始紀錄`,stopLogging:`停止紀錄`,clearLog:`清除日誌`,topic:`主題`,timestamp:`時間戳`,direction:`方向`,all:`全部`},printerFiles:{zipStarted_one:`已開始下載 {{count}} 個檔案的 ZIP`,zipStarted_other:`已開始下載 {{count}} 個檔案的 ZIP`,zipPartial:`已開始下載 ZIP，共 {{total}} 個檔案中成功取得 {{successful}} 個，其餘檔案無法取得`,downloadFailed:`下載失敗：{{error}}`,unknownError:`未知錯誤`,shiftSelectHint:`按住 Shift 點擊以選取範圍`,selectFile:`選取 {{name}}`,deselectFile:`取消選取 {{name}}`,title:`檔案管理器`,storageUsed:`已用：`,storageFree:`剩餘：`,filterPlaceholder:`篩選檔案...`,deleteButton:`刪除`,deleteFiles:`刪除 {{count}} 個檔案`,deleteFileConfirm:`刪除"{{name}}"？此操作無法復原。`,deleteFilesConfirm:`刪除 {{count}} 個選中的檔案？此操作無法復原。`,noFiles:`印表機上沒有檔案`,printerUnavailable:`印表機檔案服務無法使用。請在可連線至印表機時重試。`,loadingFiles:`載入檔案中...`,failedToLoad:`載入檔案失敗`,toast:{filesDeleted:`已刪除 {{count}} 個檔案`,deleteFailed:`刪除失敗：{{error}}`}},confirm:{delete:`確定要刪除嗎？`,unsavedChanges:`您有未儲存的更改。確定要離開嗎？`,clearQueue:`確定要清空佇列嗎？`},login:{title:`Bambuddy 登入`,subtitle:`登入您的帳戶`,username:`使用者名稱`,usernamePlaceholder:`輸入您的使用者名稱`,usernameOrEmail:`使用者名稱或信箱`,usernameOrEmailPlaceholder:`使用者名稱或 @ 信箱`,password:`密碼`,passwordPlaceholder:`輸入您的密碼`,signIn:`登入`,signingIn:`登入中...`,rememberMe:`記住我`,forgotPassword:`忘記密碼？`,autologinFailed:`自動SSO登入失敗。請在下方選擇一個提供者以繼續。`,localDisabledNotice:`本機登入已停用。請使用下方的SSO提供者之一。`,loginSuccess:`登入成功`,loginFailed:`登入失敗`,enterCredentials:`請輸入使用者名稱和密碼`,enterEmail:`請輸入您的電子郵件地址`,oidcLoginFailed:`OIDC 登入失敗`,oidcErrors:{providerError:`身份提供者返回了一個錯誤`,missingParameters:`OIDC 回呼缺少必要引數`,invalidState:`OIDC 狀態無效或已被使用`,stateExpired:`OIDC 登入會話已過期，請重試`,providerNotFound:`未找到 OIDC 提供者`,discoveryFailed:`無法獲取 OIDC 探索文件`,invalidDiscovery:`OIDC 探索文件無效`,networkError:`OIDC 權杖交換時出現網路錯誤`,badResponse:`OIDC 權杖交換時收到意外回應`,noIdToken:`OIDC 提供者未返回 ID 權杖`,validationFailed:`OIDC 權杖驗證失敗`,nonceMismatch:`OIDC nonce 不符，可能存在重放攻擊`,missingSubClaim:`OIDC 權杖缺少 sub 宣告`,noLinkedAccount:`沒有與此 OIDC 身份連結的本機帳戶`,accountInactive:`您的帳戶已被停用`,userResolutionFailed:`無法解析您的帳戶`,internalError:`OIDC 登入過程中發生內部錯誤`,tokenExchangeFailed:`OIDC 權杖交換失敗`},forgotPasswordTitle:`忘記密碼`,forgotPasswordMessage:`如果您忘記了密碼，請聯絡系統管理員進行重設。`,forgotPasswordEmailMessage:`輸入您的信箱地址，我們將向您傳送新密碼。`,emailAddress:`信箱地址`,emailPlaceholder:`your.email@example.com`,cancel:`取消`,sending:`傳送中...`,sendResetEmail:`傳送重設郵件`,howToReset:`如何重設密碼：`,resetStep1:`聯絡您的 Bambuddy 管理員`,resetStep2:`請他們在使用者管理中重設您的密碼`,resetStep3:`他們可以為您設定一個臨時密碼`,resetStep4:`使用新密碼登入並在設定中修改密碼`,gotIt:`知道了`,resetPassword:{title:`設定新密碼`,subtitle:`請在下方輸入並確認您的新密碼。`,newPassword:`新密碼`,newPasswordPlaceholder:`至少 8 個字元`,confirmPassword:`確認密碼`,confirmPasswordPlaceholder:`重複輸入新密碼`,saving:`儲存中…`,submit:`設定新密碼`,backToLogin:`回到登入`,passwordsDoNotMatch:`密碼不符`,passwordTooShort:`密碼至少需要 8 個字元`,resetFailed:`密碼重設失敗。連結可能已過期。`},twoFA:{title:`兩步驗證`,subtitle:`您的帳戶已啟用兩步驗證。請在下方輸入驗證碼。`,methodAuthenticator:`身份驗證器 App`,methodEmail:`信箱驗證碼`,methodBackup:`備用恢復碼`,instructionsTotp:`請開啟您的身份驗證器 App，輸入 Bambuddy 的 6 位驗證碼。`,instructionsEmail:`6 位驗證碼已傳送至您的信箱，有效期為 10 分鐘。`,instructionsEmailNotSent:`點選下方按鈕，透過郵件獲取驗證碼。`,instructionsBackup:`請輸入您的一個 8 位備用恢復碼。每個恢復碼只能使用一次。`,sendCodeButton:`傳送信箱驗證碼`,sendingCode:`傳送中...`,resendCode:`重新傳送驗證碼`,codeLabel:`驗證碼`,backupCodeLabel:`備用恢復碼`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`驗證`,verifyingButton:`驗證中...`,backToLogin:`← 回到登入頁面`,orContinueWith:`或透過以下方式登入`,signInWith:`使用 {{provider}} 登入`,enterCode:`請輸入驗證碼`,sendCodeFailed:`驗證碼傳送失敗`,invalidCode:`無效驗證碼，請重試。`}},setup:{title:`Bambuddy 設定`,subtitle:`為您的 Bambuddy 實例設定身份驗證`,enableAuth:`啟用身份驗證`,adminAccount:`管理員帳戶`,adminAccountDesc:`如果管理員使用者已存在，將使用現有管理員帳戶啟用身份驗證。如需使用現有管理員，請將下方欄位留空，或輸入新憑據建立新管理員使用者。`,adminUsername:`管理員使用者名稱`,adminPassword:`管理員密碼`,optionalIfAdminExists:`（如管理員使用者已存在則為可選）`,adminUsernamePlaceholder:`輸入管理員使用者名稱（可選）`,adminPasswordPlaceholder:`輸入管理員密碼（可選）`,confirmPassword:`確認密碼`,confirmPasswordPlaceholder:`確認管理員密碼`,settingUp:`設定中...`,completeSetup:`完成設定`,toast:{authEnabledAdminCreated:`身份驗證已啟用並建立了管理員使用者`,authEnabledExistingAdmins:`使用現有管理員使用者啟用了身份驗證`,setupCompleted:`設定完成`,enterBothCredentials:`請輸入管理員使用者名稱和密碼，或將兩者留空以使用現有管理員使用者`,passwordsDoNotMatch:`密碼不符`,passwordTooShort:`密碼至少需要 6 個字元`}},changePassword:{title:`修改密碼`,currentPassword:`目前密碼`,currentPasswordPlaceholder:`輸入目前密碼`,newPassword:`新密碼`,newPasswordPlaceholder:`輸入新密碼（至少 6 個字元）`,confirmPassword:`確認新密碼`,confirmPasswordPlaceholder:`確認新密碼`,passwordsDoNotMatch:`密碼不符`,passwordTooShort:`密碼至少需要 6 個字元`,changing:`修改中...`,success:`密碼修改成功`,failed:`密碼修改失敗`},plateAlert:{title:`列印已暫停！`,message:`在列印板上偵測到物體。列印已自動暫停。請清理列印板並繼續列印。`,understand:`我知道了`},camera:{title:`攝影機檢視`,invalidPrinterId:`無效的印表機 ID`,live:`即時`,snapshot:`快照`,restartStream:`重新啟動流`,refreshSnapshot:`重新整理快照`,fullscreen:`全螢幕`,exitFullscreen:`離開全螢幕`,connectingToCamera:`連線攝影機中...`,capturingSnapshot:`拍攝快照中...`,connectionLost:`連線已斷開`,connectionFailed:`攝影機連線失敗`,reconnecting:`{{countdown}} 秒後重新連線...（第 {{attempt}}/{{max}} 次嘗試）`,reconnectNow:`立即重新連線`,cameraUnavailable:`攝影機不可用`,cameraUnavailableDesc:`請確保印表機已通電並已連線。`,noCamera:`無可用攝影機`,retry:`重試`,cameraStream:`攝影機流`,zoomOut:`縮小`,zoomIn:`放大`,resetZoom:`重設縮放`,recording:`錄製中`,startRecording:`開始錄製`,stopRecording:`停止錄製`,chamberLight:`切換腔室燈`,unavailable:`攝影機無法使用`,diagnose:{button:`診斷`,modalTitle:`攝影機診斷`,running:`正在執行診斷...`,runFailed:`無法執行診斷: {{error}}`,retry:`重新執行`,stage:{tcp_reachable:`網路可達性`,first_frame:`畫面擷取`,live_stream_active:`直播串流進行中`},summary:{all_ok:`攝影機運作正常。診斷已成功完成所有階段。`,live_stream_active_healthy:`攝影機正在傳輸最新畫面 — 無需測試。`,printer_unreachable:`無法存取印表機。請檢查 IP 位址、網路連線以及印表機是否已開機。`,camera_port_closed:`印表機可存取，但攝影機連接埠已關閉。請確認印表機設定中已啟用僅 LAN 模式與開發者模式。`,no_frame:`已連線到攝影機，但未收到畫面。請重試或檢查印表機設定中攝影機是否已啟用。`,unknown_failure:`攝影機診斷因不明原因失敗。請查看支援日誌了解詳情。`},meta:{protocol:`協定`,port:`連接埠`,profile:`設定檔`}}},groups:{title:`群組管理`,subtitle:`管理存取控制的權限群組`,backToSettings:`返回設定`,createGroup:`建立群組`,noPermission:`您沒有存取此頁面的權限。`,system:`系統`,noDescription:`無描述`,usersCount:`{{count}} 個使用者`,permissionsCount:`{{count}} 個權限`,edit:`編輯`,delete:`刪除`,toast:{created:`群組建立成功`,updated:`群組更新成功`,deleted:`群組刪除成功`,enterGroupName:`請輸入群組名稱`},modal:{editGroup:`編輯群組`,createGroup:`建立群組`,cancel:`取消`,saving:`儲存中...`,creating:`建立中...`,saveChanges:`儲存更改`},form:{groupName:`群組名稱`,groupNamePlaceholder:`輸入群組名稱`,systemGroupWarning:`系統群組名稱不可更改`,description:`描述`,descriptionPlaceholder:`輸入描述（可選）`,permissions:`權限（已選 {{count}} 個）`},deleteModal:{title:`刪除群組`,message:`確定要刪除此群組嗎？此群組中的使用者將失去這些權限。`,confirm:`刪除群組`},editor:{title:`編輯群組`,createTitle:`建立群組`,search:`搜尋權限...`,selectAll:`全選`,clearAll:`清除全部`,permissionsSelected:`已選 {{count}} 個`,noResults:`沒有權限匹配您的搜尋`,websocketHint:`即時更新所需。缺少此權限時，介面將回退到定期輪詢。`}},users:{title:`使用者管理`,subtitle:`管理使用者及其對 Bambuddy 實例的存取`,backToSettings:`返回設定`,createUser:`建立使用者`,noPermission:`您沒有存取此頁面的權限。`,admin:`管理員`,noGroups:`無群組`,active:`活躍`,inactive:`非活躍`,edit:`編輯`,delete:`刪除`,system:`系統`,noGroupsAvailable:`無可用群組`,table:{username:`使用者名稱`,groups:`群組`,status:`狀態`,actions:`操作`},toast:{created:`使用者建立成功`,updated:`使用者更新成功`,deleted:`使用者刪除成功`,fillRequired:`請填寫所有必填欄位`,passwordsDoNotMatch:`密碼不符`,passwordTooShort:`密碼至少需要 6 個字元`,ldapProvisioned:`已建立 LDAP 使用者「{{username}}」`},modal:{createUser:`建立使用者`,editUser:`編輯使用者`,cancel:`取消`,creating:`建立中...`,saving:`儲存中...`,saveChanges:`儲存更改`,advancedAuthSubtitle:`使用進階認證`,tabsAriaLabel:`使用者來源`,localTab:`本機`,ldapTab:`LDAP`,ldapSearchLabel:`搜尋目錄`,ldapSearchPlaceholder:`輸入使用者名稱、姓名或電子郵件...`,ldapMinChars:`輸入至少 2 個字元以搜尋`,ldapTypeToSearch:`開始輸入以搜尋 LDAP 目錄`,ldapSearching:`搜尋目錄中...`,ldapNoResults:`目錄中沒有符合的使用者`,ldapSearchError:`目錄搜尋失敗。請檢查 LDAP 伺服器狀態。`,ldapAlreadyProvisioned:`已建立`,ldapSelectedLabel:`已選`,ldapProvision:`建立使用者`,ldapProvisioning:`建立中...`,ldapErrorProvision:`建立失敗。請檢查 LDAP 伺服器狀態後重試。`},form:{username:`使用者名稱`,usernamePlaceholder:`輸入使用者名稱`,email:`信箱`,emailPlaceholder:`user@example.com`,password:`密碼`,passwordPlaceholder:`輸入密碼`,confirmPassword:`確認密碼`,confirmPasswordPlaceholder:`確認密碼`,newPasswordPlaceholder:`輸入新密碼`,confirmNewPasswordPlaceholder:`確認新密碼`,leaveBlankToKeep:`留空以保持目前值`,groups:`群組`,optional:`可選`,autoGeneratedPassword:`將自動產生安全密碼並透過郵件傳送給使用者。`,passwordManagedByAdvancedAuth:`密碼由進階認證管理。使用"重設密碼"透過郵件向使用者傳送新密碼。`,resetPassword:`重設密碼`,resettingPassword:`重設密碼中...`},deleteModal:{title:`刪除使用者`,message:`確定要刪除此使用者嗎？此操作無法復原。`,confirm:`刪除使用者`}},streamOverlay:{title:`流疊加層`,invalidPrinterId:`無效的印表機 ID`,cameraStream:`攝影機流`,progress:`進度`,eta:`預計完成時間`,printerIdle:`印表機空閒`,printerOffline:`印表機離線`,builder:{title:`直播疊加層`,description:`產生直播疊加層的網址：全螢幕攝影機畫面上疊加即時列印資訊，可用於 OBS、牆面顯示器或任何瀏覽器來源。選擇需要的欄位並複製網址。`,printer:`印表機`,size:`文字大小`,sizeSmall:`小`,sizeMedium:`中`,sizeLarge:`大`,fps:`影格率`,fpsHint:`無論設定多少，A1 與 P1 的攝影機最高約為每秒 5 影格。`,token:`直播疊加層權杖（選填）`,tokenHint:`僅在啟用登入時需要：OBS 沒有自己的登入工作階段。請在上方以直播疊加層範圍建立一個。`,tokenWarning:`此網址包含權杖：任何能看到它的人都可以觀看畫面並看到檔案名稱。撤銷權杖即可中止存取。`,fields:`要顯示的欄位`,fieldPrinter:`印表機名稱`,fieldFilename:`檔案名稱`,fieldStatus:`狀態`,fieldProgress:`進度列`,fieldLayers:`層數`,fieldEta:`剩餘時間與預計完成時間`,fieldCamera:`攝影機畫面`,chamberHint:`僅在具備真實機箱感測器的機型上顯示機箱溫度：P1 與 A1 回報的數值沒有意義，因此不顯示。`,urlTitle:`疊加層網址`,open:`開啟`,showPreview:`顯示預覽`,hidePreview:`隱藏預覽`,previewTitle:`疊加層預覽`},status:{printing:`列印中`,paused:`已暫停`,finished:`已完成`,failed:`失敗`,idle:`空閒`,unknown:`未知`}},profiles:{title:`設定檔案`,subtitle:`管理您的切片預設和壓力推進校準`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`本機設定檔案`,kprofiles:`K 值設定`},orcaCloud:{connectedAs:`已連接`,connectedShort:`已連接到 Orca Cloud`,logout:`中斷連線`,noLogoutPermission:`您沒有中斷連線的權限`,noConnectPermission:`您沒有連接到 Orca Cloud 的權限`,retry:`重試`,connectButton:`連接 Orca Cloud`,connect:{title:`連接到 Orca Cloud`,description:`登入您的 Orca Cloud 帳號,將切片機設定檔同步到 Bambuddy。`},device:{title:`在 Orca Cloud 中核准 Bambuddy`,instruction:`開啟 Orca Cloud 並核准此代碼。核准後 Bambuddy 會自動連接。`,codeLabel:`您的配對代碼`,openButton:`開啟 Orca Cloud 核准頁面`,manualHint:`或前往 {{url}} 並輸入上方的代碼。`,waiting:`正在等待您核准…`,cancel:`取消`},profiles:{title:`您的 Orca Cloud 設定檔 ({{count}})`,refresh:`重新整理`,empty:`您的 Orca Cloud 帳號中尚無設定檔。`},toast:{disconnected:`已從 Orca Cloud 中斷連線`},errors:{startFailed:`無法啟動 Orca Cloud 登入流程。`,denied:`配對在 Orca Cloud 中被拒絕。`,expired:`配對代碼已過期。請點擊「連接」重試。`,pollFailed:`等待核准時連線中斷。請重試。`}},localProfiles:{title:`本機設定檔案`,subtitle:`從 OrcaSlicer 匯入和管理切片預設`,import:`匯入設定檔案`,importDesc:`將 .bbscfg、.bbsflmt、.orca_filament、.zip 或 .json 檔案拖放到此處`,importing:`匯入中...`,search:`搜尋本機預設...`,noPresets:`尚無本機預設`,noSearchResults:`沒有符合搜尋的預設`,badge:`本機`,edit:`編輯`,delete:`刪除`,cancel:`取消`,deleteConfirmTitle:`刪除預設`,deleteConfirm:`確定要刪除此預設嗎？此操作無法復原。`,source:`來源`,inheritsFrom:`繼承自`,filamentType:`類型`,vendor:`廠商`,compatiblePrinters:`相容印表機`,nozzleTemp:`噴嘴溫度`,cost:`成本`,density:`密度`,pressureAdvance:`壓力推進`,filament:`耗材`,process:`工藝`,printer:`印表機`,toast:{importSuccess:`已匯入 {{count}} 個預設`,importSkipped:`跳過 {{count}} 個預設（重複）`,importError:`匯入時出現 {{count}} 個錯誤`,deleted:`預設已刪除`,updated:`預設已更新`}},connectedAs:`已連線為`,signInExpiredTitle:`Bambu Cloud 登入已過期`,signInExpiredBody:`Bambu Lab 不再接受已儲存的權杖。請重新登入以恢復雲端設定檔、MakerWorld 匯入與韌體檢查。`,logout:`登出`,noLogoutPermission:`您沒有登出的權限`,failedToLoad:`載入設定檔案失敗`,retry:`重試`,time:{justNow:`剛剛`,minsAgo:`{{count}} 分鐘前`,hoursAgo:`{{count}} 小時前`,daysAgo:`{{count}} 天前`},toast:{loggedOut:`已登出`},login:{title:`連線到拓竹雲`,subtitle:`跨裝置同步您的切片預設`,email:`信箱`,password:`密碼`,region:`地區`,regionGlobal:`全球`,regionChina:`中國`,verificationCode:`驗證碼`,totpCode:`驗證器驗證碼`,checkEmail:`檢查您的信箱 ({{email}}) 獲取 6 位驗證碼`,enterTotpHint:`輸入驗證器 App 中的 6 位驗證碼`,accessToken:`存取權杖`,accessTokenHint:`貼上您的拓竹雲端存取權杖。中國大陸帳號（綁定手機號碼、無 Email 登入）僅能使用此方式登入。可從 MakerWorld 瀏覽器 Cookie 取得權杖，詳見 Wiki。`,back:`返回`,loginButton:`登入`,verifyButton:`驗證`,setTokenButton:`設定權杖`,useToken:`改用存取權杖`,captchaTitle:`Bambu Cloud 要求進行 CAPTCHA 驗證`,captchaBody:`Bambu 在接受登入之前要求你的網路通過 CAPTCHA 驗證，而該驗證無法在 Bambuddy 中完成。這與你的電子郵件和密碼無關。限制與你的公開 IP 位址綁定，通常幾小時後會自動解除；反覆重試只會延長限制。若要立即登入，請改用從瀏覽器工作階段取得的存取權杖。`,useEmail:`改用信箱登入`,toast:{loggedIn:`登入成功`,codeSent:`驗證碼已傳送到您的信箱`,enterTotp:`輸入驗證器 App 中的程式碼`,tokenSet:`權杖設定成功`}},presets:{myPreset:`我的預設（可編輯）`,duplicate:`複製`,editable:`可編輯`,failedToLoadDetails:`載入預設詳情失敗`,deleteConfirm:`刪除此預設？`,deleteWarning:`這將從拓竹雲中永久刪除"{{name}}"。此操作無法復原。`,noDuplicatePermission:`您沒有複製預設的權限`,noEditPermission:`您沒有編輯預設的權限`,noDeletePermission:`您沒有刪除預設的權限`,types:{filament:`耗材預設`,printer:`印表機預設`,process:`工藝預設`},toast:{deleted:`預設已刪除`,created:`預設已建立`,updated:`預設已更新`,duplicated:`預設已複製`,fieldAdded:`欄位"{{key}}"已新增`,exported:`預設已匯出`},baseLabel:`基礎：{{name}}`,currentLabel:`目前：{{name}}`,newPreset:`新增預設`,editPreset:`編輯預設`,duplicatePreset:`複製預設`,createNewPreset:`建立新預設`,customizeSettings:`自訂新預設的設定`,compareWithBase:`與基礎預設比較`,compare:`比較`,basePreset:`基礎預設`,selectBasePreset:`選擇基礎預設...`,presetName:`預設名稱`,myCustomPreset:`我的自訂預設`,inheritsFrom:`繼承自`,dropJsonToImport:`拖放 JSON 以匯入`,tabs:{common:`常用`,allFields:`所有欄位`},availableFields:`可用欄位`,searchFieldsPlaceholder:`搜尋欄位...`,noMatchingFields:`沒有匹配的欄位`,allFieldsAdded:`所有欄位已新增`,addCustomField:`新增自訂欄位`,yourOverrides:`您的覆蓋值`,noOverridesYet:`尚無覆蓋值`,clickFieldsToAdd:`點選左側的欄位進行新增`,saveAsTemplate:`儲存為範本`,jsonTip:`提示：將 .json 檔案拖放到此對話方塊的任意位置以匯入設定`},cloudView:{searchPlaceholder:`搜尋預設...`,templates:`範本`,refresh:`重新整理`,newPreset:`新增預設`,clearFilters:`清除篩選`,compareMode:`比較模式`,selectAnotherPreset:`選擇另一個 {{type}} 預設`,clickTwoPresets:`點選兩個相同類型的預設進行比較`,selectFirst:`1. 選擇第一個`,selectSecond:`2. 選擇第二個`,compareNow:`立即比較`,lastSynced:`上次同步：`,showingCount:`顯示 {{showing}} / {{total}} 個預設`,noPresetsFound:`未找到預設`,columns:{filament:`耗材`,process:`工藝`,printer:`印表機`},noFilamentPresets:`無耗材預設`,noProcessPresets:`無工藝預設`,noPrinterPresets:`無印表機預設`,filters:{type:`類型`,owner:`所有者`,printer:`印表機`,nozzle:`噴嘴`,filament:`耗材`,layer:`層`,all:`全部`,myPresets:`我的預設`,builtIn:`內建`,process:`工藝`},noTemplatesPermission:`您沒有管理範本的權限`,noRefreshPermission:`您沒有重新整理設定檔案的權限`,noCreatePermission:`您沒有建立預設的權限`},templates:{title:`快速範本`,noTemplates:`尚無範本`,createFirst:`從預設編輯器建立範本`,typeFilter:`類型：`,deleteTitle:`刪除範本`,deleteWarning:`此操作無法復原`,deleteConfirm:`確定要刪除"{{name}}"嗎？`,namePlaceholder:`範本名稱`,descriptionPlaceholder:`描述`,settingsJson:`設定 (JSON)`,fieldsCount:`{{count}} 個欄位`,shownInModals:`在對話方塊中顯示`,hiddenInModals:`在對話方塊中隱藏`,apply:`套用`,toast:{deleted:`範本已刪除`,updated:`範本已更新`,created:`範本已建立`,applied:`範本已套用`}}},support:{debugLoggingActive:`偵錯日誌紀錄已啟用`,manageLogs:`管理`,collectItem7:`印表機連線和韌體版本`,collectItem8:`整合狀態（Spoolman、MQTT、HA）`,collectItem9:`網路介面（僅子網）`,collectItem10:`Python 套件版本`,collectItem11:`資料庫健康檢查`,collectItem12:`Docker 環境詳情`,bundleGenerating:`正在產生套件...`,bundleStepConnection:`正在執行印表機連線檢查`,bundleStepVirtualPrinters:`正在執行虛擬印表機設定檢查`,bundleStepLogScan:`正在掃描最近的日誌以尋找已知問題`,bundleStepBuild:`正在建立支援套件 ZIP 檔案`},fileManager:{variants:{badge:`{{count}} 個版本`,groupAction:`歸為版本群組`,groupTooltip:`將這些檔案標記為針對不同印表機切片的同一工作`,grouped:`已將 {{count}} 個檔案歸為版本群組`,printAlternatives:`列印（{{count}} 個備選）`},title:`檔案管理器`,subtitle:`組織和管理您的列印檔案`,uploadFiles:`上傳檔案`,newFolder:`新增資料夾`,folderName:`資料夾名稱`,folderNamePlaceholder:`例如：功能零件`,renameFile:`重新命名檔案`,renameFolder:`重新命名資料夾`,invalidFilenameChar:`列印檔案名稱中不允許使用字元 "{{char}}"。印表機 SD 卡拒絕以下字元: < > : " / \\ | ? *`,moveFiles:`移動 {{count}} 個檔案`,rootNoFolder:`根目錄（無資料夾）`,current:`目前`,linkFolder:`連結資料夾`,linkFolderDescription:`將"{{name}}"連結到專案或歸檔以便快速存取。`,project:`專案`,archive:`歸檔`,noProjectsFound:`未找到專案`,noArchivesFound:`未找到歸檔`,unlink:`取消連結`,link:`連結`,dragDropFiles:`將檔案拖放到此處`,dropFilesHere:`將檔案放在此處`,releaseToUpload:`釋放以上傳`,orClickToBrowse:`或點選瀏覽`,allFileTypesSupported:`支援所有檔案類型。ZIP 檔案將被解壓。`,zipFilesDetected:`偵測到 ZIP 檔案`,zipExtractOptions:`ZIP 檔案將被解壓。選擇如何處理資料夾結構：`,preserveZipStructure:`保留 ZIP 中的資料夾結構`,createFolderFromZip:`從 ZIP 檔名建立資料夾`,stlThumbnailGeneration:`STL 縮圖產生`,zipMayContainStl:`ZIP 檔案可能包含 STL 檔案。可以在解壓時產生縮圖。`,thumbnailsCanBeGenerated:`可以為 STL 檔案產生縮圖。大型模型可能需要更長時間處理。`,generateThumbnailsForStl:`為 STL 檔案產生縮圖`,threemfDetected:`偵測到 3MF 檔案`,threemfExtractionInfo:`將自動從 3MF 檔案中提取印表機型號、材料、顏色和列印設定。`,willBeExtracted:`將被解壓`,filesExtracted:`已解壓 {{count}} 個檔案`,uploadComplete:`上傳完成：{{succeeded}} 個成功`,uploadFailed:`上傳失敗`,zipFilesFailed:`{{count}} 個檔案失敗`,uploading:`上傳中...`,changeLink:`更改連結...`,linkTo:`連結到...`,linkToProjectOrArchive:`連結到專案或歸檔`,generateThumbnail:`產生縮圖`,generateThumbnails:`產生縮圖`,generateThumbnailsForMissing:`為缺少縮圖的 STL 檔案產生縮圖`,gridView:`網格檢視`,listView:`列表檢視`,lowDiskSpaceWarning:`磁碟空間不足警告`,lowDiskSpaceDetails:`僅剩 {{free}}（總共 {{total}}）。閾值設定為 {{threshold}} GB。`,files:`檔案`,folders:`資料夾`,size:`大小`,free:`剩餘`,allFiles:`所有檔案`,allExternal:`外部`,externalIsEmpty:`沒有外部檔案`,externalEmptyDescription:`已連結的外部資料夾中的檔案將顯示於此。`,wrap:`換行`,enableTextWrapping:`啟用文字換行`,disableTextWrapping:`停用文字換行`,collapse:`折疊`,collapseFoldersByDefault:`預設折疊資料夾`,expandFoldersByDefault:`預設展開資料夾`,folderSort:`資料夾排序`,folderSortByName:`依名稱`,folderSortByActivity:`依最近活動`,dragToResizeTooltip:`拖曳調整大小，雙擊重設`,searchFiles:`搜尋檔案...`,searchSubfoldersHint:`包含子資料夾`,readme:{truncated:`已截斷`,show:`顯示 README`,hide:`隱藏 README`,label:`README`},tags:{title:`標籤`,subtitle:`為檔案加上跨資料夾的標籤 —— 玩具、兒童安全、僅 PETG 等等。`,manage:`標籤`,manageTitle:`管理標籤目錄`,add:`新增標籤`,edit:`重新命名標籤`,name:`名稱`,fileCount:`檔案數`,empty:`還沒有標籤。建立一個開始為檔案加標籤吧。`,noMatches:`沒有符合的標籤。`,createPlaceholder:`例：玩具、兒童安全、petg`,createButton:`建立`,nameRequired:`名稱為必填。`,searchPlaceholder:`過濾標籤…`,created:`已建立標籤。`,updated:`已重新命名標籤。`,deleted:`已刪除標籤。`,saveFailed:`無法儲存標籤。`,deleteFailed:`無法刪除標籤。`,applyFailed:`無法套用標籤。`,applyAdd:`新增標籤`,applyRemove:`移除標籤`,applyAddSuccess:`已為 {{files}} 個檔案新增 {{count}} 個標籤。`,applyRemoveSuccess:`已從 {{files}} 個檔案移除 {{count}} 個標籤。`,actionAdd:`加到所選檔案`,actionRemove:`從所選檔案移除`,tagAction:`標籤`,bulkTitle:`為所選的 {{count}} 個檔案加標籤`,bulkTooltip:`在每個所選檔案上新增或移除標籤。`,noPermission:`您沒有為檔案加標籤的權限。`,filterLabel:`篩選條件：`,clearAll:`全部清除`,confirmDelete:`刪除標籤 "{{name}}"？`,confirmDeleteMessage:`此動作會從目錄中刪除該標籤。檔案保留其他標籤。`,confirmDeleteInUseMessage:`此標籤存在於 {{count}} 個檔案上。刪除後所有檔案上的標籤都會消失，但檔案本身不會動。`,editAria:`編輯 {{name}}`,deleteAria:`刪除 {{name}}`},allTypes:`所有類型`,prints:`列印`,ascending:`升序`,descending:`降序`,showModified:`顯示修改日期`,hideModified:`隱藏修改日期`,lastModified:`最後修改`,lastActivity:`最近活動`,resultsCount:`{{showing}} / {{total}} 個檔案`,selectAll:`全選`,deselectAll:`取消全選`,selected:`已選擇 {{count}} 個`,adding:`新增中...`,loadingFiles:`載入檔案中...`,folderIsEmpty:`資料夾為空`,noFilesYet:`尚無檔案`,folderEmptyDescription:`上傳檔案或將檔案移入此資料夾以開始使用。`,noFilesDescription:`上傳檔案以開始組織您的列印相關檔案。`,noMatchingFiles:`沒有匹配的檔案`,noMatchingFilesDescription:`沒有檔案匹配您目前的搜尋或篩選條件。`,clearFilters:`清除篩選`,printedCount:`已列印 {{count}} 次`,uploadedBy:`上傳者`,deleteFolder:`刪除資料夾`,deleteFile:`刪除檔案`,deleteFilesCount:`刪除 {{count}} 個檔案`,deleteFolderConfirm:`確定要刪除此資料夾嗎？其中的所有檔案也將被刪除。`,deleteFileConfirm:`確定要刪除此檔案嗎？`,deleteFilesConfirm:`確定要刪除 {{count}} 個選中的檔案嗎？此操作無法復原。`,deleting:`刪除中...`,noPermissionRenameFolder:`您沒有重新命名資料夾的權限`,noPermissionLinkFolder:`您沒有連結資料夾的權限`,noPermissionDeleteFolder:`您沒有刪除資料夾的權限`,onlyEmptyFoldersDeletable:`您只能刪除空資料夾`,noPermissionPrint:`您沒有列印的權限`,noPermissionSlice:`您沒有切片檔案的權限`,noPermissionAddToQueue:`您沒有新增到佇列的權限`,noPermissionDownload:`您沒有下載檔案的權限`,noPermissionPreview:`您沒有預覽檔案的權限`,preview3d:`3D 預覽`,noPermissionRenameFile:`您沒有重新命名此檔案的權限`,noPermissionGenerateThumbnail:`您沒有產生縮圖的權限`,noPermissionDeleteFile:`您沒有刪除此檔案的權限`,noPermissionCreateFolder:`您沒有建立資料夾的權限`,noPermissionUpload:`您沒有上傳檔案的權限`,noPermissionMoveFiles:`您沒有移動檔案的權限`,noPermissionDeleteFiles:`您沒有刪除檔案的權限`,linkExternal:`連結外部`,linkExternalFolder:`連結外部資料夾`,linkExternalFolderDescription:`將主機目錄（NAS、USB、網路共享）掛載到檔案管理器中。檔案不會被複制——直接從原始路徑存取。`,externalFolderNamePlaceholder:`例如：NAS列印檔案`,externalPath:`主機路徑`,externalPathHelp:`Docker主機上目錄的絕對路徑。必須以繫結掛載方式掛載到容器中。`,readOnly:`只讀`,readOnlyHelp:`防止上傳和刪除`,showHiddenFiles:`顯示隱藏檔案（點檔案）`,externalFolder:`外部資料夾`,scanFolder:`掃描`,toast:{folderCreated:`資料夾已建立`,openInSlicerFailed:`無法在切片軟體中開啟`,folderDeleted:`資料夾已刪除`,fileDeleted:`檔案已刪除`,filesDeleted:`已刪除 {{count}} 個檔案`,filesMoved:`檔案已移動`,folderLinked:`資料夾已連結`,folderUnlinked:`資料夾已取消連結`,externalFolderLinked:`外部資料夾已連結並掃描`,folderScanned:`掃描完成：新增 {{added}} 個，移除 {{removed}} 個`,addedToQueue:`已將 {{count}} 個檔案新增到佇列`,addedToQueuePartial:`已新增 {{added}} 個檔案，{{failed}} 個失敗`,failedToAddToQueue:`新增檔案失敗：{{error}}`,fileRenamed:`檔案已重新命名`,folderRenamed:`資料夾已重新命名`,thumbnailsGenerated:`已產生 {{count}} 個縮圖`,thumbnailsGeneratedPartial:`已產生 {{succeeded}} 個縮圖，{{failed}} 個失敗`,noStlMissingThumbnails:`沒有缺少縮圖的 STL 檔案`,failedToGenerateThumbnails:`產生縮圖失敗：{{error}}`,thumbnailGenerated:`縮圖已產生`,failedToGenerateThumbnail:`產生縮圖失敗：{{error}}`}},projects:{parentLabel:`父專案`,parentNone:`無（頂層專案）`,parentHint:`將此專案巢狀置於另一個專案下，其數據將彙總至主專案`,partOf:`屬於 {{name}}`,subProjectCount:`{{count}} 個子專案`,subProjectsOf:`{{name}} 的子專案`,collapseSubProjects:`摺疊子專案`,expandSubProjects:`展開子專案`,title:`專案`,subtitle:`組織和追蹤您的 3D 列印專案`,newProject:`新增專案`,editProject:`編輯專案`,deleteProject:`刪除專案`,projectName:`專案名稱`,description:`描述`,noProjects:`尚無專案`,noProjectsFiltered:`沒有{{status}}專案`,noProjectsFilteredHelp:`您沒有任何{{status}}專案。當專案狀態更改時，它們將出現在這裡。`,createFirst:`建立您的第一個項目以開始組織相關列印、追蹤進度和管理構建。`,createFirstButton:`建立您的第一個項目`,create:`建立`,files:`檔案`,prints:`列印`,plates:`板`,parts:`零件`,lastModified:`最後修改`,deleteConfirm:`確定要刪除此項目嗎？歸檔和佇列項目將被取消連結但不會被刪除。`,addFiles:`新增檔案`,removeFile:`移除檔案`,viewDetails:`檢視詳情`,namePlaceholder:`例如：Voron 2.4 構建`,urlLabel:`網址`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`網址必須以 http:// 或 https:// 開頭`,openExternalUrl:`開啟專案網址`,coverImageLabel:`封面圖片`,coverImageAlt:`專案封面圖片`,coverImageUpload:`上傳`,coverImageReplace:`替換`,coverImageRemove:`移除`,descriptionPlaceholder:`可選描述...`,color:`顏色`,targetPlates:`目標板數`,targetPlatesPlaceholder:`例如：25`,targetPlatesHelp:`列印任務數量`,targetParts:`目標零件數`,targetPartsPlaceholder:`例如：150`,targetPartsHelp:`所需零件總數`,targetSets:`每個檔案的份數`,targetSetsPlaceholder:`例如 10`,targetSetsHelp:`每個可列印檔案需要列印的次數`,tagsLabel:`標籤（逗號分隔）`,tagsPlaceholder:`例如：voron、功能件、禮物`,dueDate:`截止日期`,priority:`優先順序`,priorityLow:`低`,priorityNormal:`普通`,priorityHigh:`高`,priorityUrgent:`緊急`,statusActive:`進行中`,statusCompleted:`已完成`,statusArchived:`已歸檔`,done:`完成`,completed:`已完成`,failed:`失敗`,inQueue:`佇列中`,noPrintsYet:`尚無列印`,printJobs:`列印任務（板）`,partsPrinted:`已列印零件`,failedParts:`失敗零件`,import:`匯入`,export:`匯出`,importProject:`匯入專案`,exportAll:`匯出所有專案`,loading:`載入專案中...`,noEditPermission:`您沒有編輯專案的權限`,noDeletePermission:`您沒有刪除專案的權限`,noCreatePermission:`您沒有建立專案的權限`,noImportPermission:`您沒有匯入專案的權限`,noExportPermission:`您沒有匯出專案的權限`,toast:{created:`專案已建立`,updated:`專案已更新`,deleted:`專案已刪除`,imported:`專案已匯入`,multipleImported:`已匯入 {{count}} 個項目`,importFailed:`匯入失敗`,exported:`專案已匯出（僅中繼資料）`}},projectDetail:{notFound:`未找到專案`,backToProjects:`返回專案`,export:`匯出`,exportProject:`匯出專案`,noExportPermission:`您沒有匯出專案的權限`,noEditPermission:`您沒有編輯專案的權限`,partOf:`屬於：`,priorityLabel:`優先順序：`,noPrints:`此項目尚無列印`,status:{active:`進行中`,completed:`已完成`,archived:`已歸檔`},priority:{low:`低`,normal:`普通`,high:`高`,urgent:`緊急`},dueDate:{overdue:`已逾期`,today:`今天到期`,daysLeft:`還有 {{count}} 天`},progress:{platesProgress:`板進度`,partsProgress:`零件進度`,setsProgress:`完整套數`,sets:`套`,setsHint:`當每個可列印檔案都達到此次數時，即完成一套`,printJobs:`列印任務`,parts:`零件`,percentComplete:`{{percent}}% 完成`,remaining:`剩餘 {{count}} 個`},stats:{printJobs:`列印任務`,total:`總計`,failed:`{{count}} 個失敗`,partsPrinted:`已列印 {{count}} 個零件`,printTime:`列印時間`,filamentUsed:`耗材用量`},cost:{title:`成本追蹤`,filamentCost:`耗材成本`,energy:`能源`,totalCost:`總成本`,total:`總計`,includesBom:`含物料清單`,budget:`預算`,remaining:`剩餘`},subProjects:{title:`子專案 ({{count}})`,jobs:`{{count}} 個任務`},rollup:{title:`包含 {{count}} 個子專案`,progress:`整體進度`,percentComplete:`已完成 {{percent}}%`},notes:{title:`備註`,noEditPermission:`您沒有編輯備註的權限`,placeholder:`新增關於此項目的備註...`,empty:`尚無備註。點選編輯新增備註。`},files:{title:`檔案`,linkFolders:`從檔案管理器連結資料夾`,forQuickAccess:`到此項目以便快速存取。`,fileCount:`{{count}} 個檔案`,empty:`未連結資料夾。前往檔案管理器將資料夾連結到此項目。`,printedCount:`已列印 {{count}} 次`,progressTooltip:`已完成 {{done}}/{{target}} 次列印`,noFiles:`此資料夾中沒有檔案。`},bom:{title:`材料清單`,acquired:`已獲取 {{completed}}/{{total}}`,showAll:`顯示全部`,hideDone:`隱藏已完成`,addPart:`新增零件`,noAddPermission:`您沒有新增零件的權限`,partNamePlaceholder:`零件名稱（例如：M3x8 螺絲）`,partName:`零件名稱`,qty:`數量`,price:`價格 ({{currency}})`,sourcingUrlPlaceholder:`採購連結（可選）`,remarksPlaceholder:`備註（可選）`,deletePart:`刪除零件`,deleteConfirm:`確定要刪除"{{name}}"嗎？`,noUpdatePermission:`您沒有更新零件的權限`,noEditPermission:`您沒有編輯零件的權限`,noDeletePermission:`您沒有刪除零件的權限`,totalCost:`總成本：`,empty:`材料清單中沒有零件。新增硬體、電子元件或其他元件以追蹤需要採購的物品。`},timeline:{title:`活動時間線`,empty:`尚無活動。`},template:{saveAsTemplate:`儲存為範本`,noCreatePermission:`您沒有建立範本的權限`},queue:{title:`佇列`,viewAll:`檢視全部`,printing:`{{count}} 個列印中`,queued:`{{count}} 個佇列中`},prints:{title:`列印 ({{count}})`},toast:{projectUpdated:`專案已更新`,partAdded:`零件已新增`,partRemoved:`零件已移除`,exportFailed:`匯出失敗`,projectExported:`專案已匯出`,templateCreated:`範本已建立`}},system:{title:`系統資訊`,version:`版本`,uptime:`執行時間`,cpuUsage:`CPU 使用率`,memoryUsage:`記憶體使用率`,diskUsage:`磁碟使用率`,networkInfo:`網路資訊`,logs:`日誌`,debugMode:`偵錯模式`,enableDebug:`啟用偵錯日誌`,disableDebug:`停用偵錯日誌`,downloadLogs:`下載日誌`,clearLogs:`清除日誌`,dockerInfo:`Docker 資訊`,containerName:`容器名稱`,imageName:`映象名稱`,platform:`平臺`,architecture:`架構`},sponsors:{sectionTitle:`獨立運作·社群支持`,tagline:`Bambuddy 完全免費，並將持續免費——感謝主動支持的使用者。沒有創投，也沒有雲端綁定。`,viewSupporters:`查看支持者`,toastPrints:`你已經用 Bambuddy 完成了 {{count}} 次列印。Bambuddy 之所以免費，要感謝支持者。`,toastCost:`你已經用 Bambuddy 追蹤了 {{total}} 的耗材。看看是誰讓專案保持獨立。`,toastArchives:`用 Bambuddy 封存了 {{count}} 次列印。看看是誰讓它保持獨立。`,toastAnniversary:`與 Bambuddy 相伴一年了！看看是誰讓專案保持獨立。`,toastVersionUpdate:`已更新至 v{{version}}。Bambuddy 之所以免費，要感謝支持者。`,toastBusiness:`您正在 {{count}} 台印表機上執行 Bambuddy？我們為團隊提供支援方案：優先修復、開立發票，以及與維護者的直接聯繫管道。`,businessCta:`Bambuddy 商業版`,businessTitle:`Bambuddy 商業版`,businessTagline:`您正在管理 {{count}} 台印表機。我們為團隊和列印農場提供優先支援、商業授權與發票開立。`},library:{title:`耗材庫`,addFilament:`新增耗材`,editFilament:`編輯耗材`,deleteFilament:`刪除耗材`,vendor:`廠商`,material:`材料`,color:`顏色`,kFactor:`K 值`,temperature:`溫度`,noFilaments:`耗材庫中沒有耗材`,deleteConfirm:`確定要刪除此耗材嗎？`,importFromPrinter:`從印表機匯入`,exportToFile:`匯出到檔案`,runWithPipeline:{actionLabel:`以管線執行`,noPermission:`您沒有執行管線的權限`,modalTitle:`以管線執行`,confirmTitle:`確認執行`,confirmIntro:`預檢發現此次執行存在問題`,sourceHint:`來源`,pipelineHint:`管線`,targetHint:`目標`,pipelineListAria:`可用管線`,runAnyway:`仍然執行`,loading:`載入中…`,empty:`尚未儲存管線。請開啟切片對話框並點擊「另存為管線」建立一個。`,noTarget:`未設定目標印表機`,noTargetMessage:`此管線沒有目標印表機。請在設定中開啟並選擇一個。`,copies:`副本數`,copiesHint:`最多 {{n}}`,classTarget:`任意 {{model}}`,toast:{started:`管線執行已開始`,failed:`無法啟動執行`},issue:{printerNotSet:`此管線未設定目標印表機。`,printerNotFound:`目標印表機已不存在。`,printerDisabled:`目標印表機已停用。`,printerOffline:`目標印表機已離線。`,filamentType:`耗材槽 {{slot}}：預期 {{expected}}，AMS 實際 {{actual}}`,filamentColor:`耗材槽 {{slot}}：顏色不同（預期 {{expected}}，AMS 實際 {{actual}}）`,amsSlotMissing:`此印表機上沒有 AMS 槽 {{slot}}`,filamentUnverified:`耗材槽 {{slot}} 來自雲端 / 標準預設，無法靜態驗證。`,noClassMatches:`此安裝中沒有符合該管線目標型號類別（{{expected}}）的印表機。`,classNotSet:`管線目標設定為印表機類別但未選擇型號。`}}},slicerSettings:{presetValuesOutdatedSidecar:`目前顯示切片器預設值：切片 sidecar 版本早於此功能，無法提供預設的實際值。更新 sidecar 映像即可查看。未變更的項目仍使用預設。`,presetValuesNotConfigured:`目前顯示切片器預設值：未設定切片 sidecar，無法讀取預設的實際值。未變更的項目仍使用預設。`,presetValuesSidecarUnavailable:`目前顯示切片器預設值：切片 sidecar 未回應，無法讀取預設的實際值。未變更的項目仍使用預設。`,presetValuesUnavailable:`目前顯示切片器預設值：無法讀取所選預設的實際值。未變更的項目仍使用預設。`,filamentDefault:`預設`,fromFile:`來自檔案`,fromFileHint:`設計者在來源檔案中修改了此項，其值為 {{value}}。`,fromFilePrinterCoupled:`設計者的印表機`,fromFilePrinterCoupledHint:`針對該檔案設計時所用的印表機調校，在你的印表機上可能不正確或超出範圍。`,fromFileOverridesPreset:`覆寫預設`,fromFileOverridesPresetHint:`檔案將其設為 {{value}}，而所選預設使用 {{preset}}。僅在應以檔案為準時才勾選。`,useFromFile:`對 {{option}} 使用來源檔案中的值`,otherFromFile:`此檔案中的其他設定`,fromFileSummary:`設計者在此檔案中改動了 {{count}} 項製程設定。只有你勾選的才會生效。`,fromFileUseAll:`使用設計者的設定`,fromFileUseAllHint:`勾選可跨印表機通用的設定。針對設計者自己印表機調校的，以及決定你所選預設集的那些，維持不勾選。`,fromFileClear:`清除 {{count}} 項`,loading:`正在載入切片設定…`,mode:{simple:`簡易`,advanced:`進階`,expert:`專家`},searchPlaceholder:`搜尋設定`,resetAll:`重設 {{count}} 項`,resetOption:`恢復預設值`,noMatches:`沒有符合搜尋的設定。`},slice:{filamentSlotUnset:`未設定`,processSettingsEmbedded:`啟用「使用檔案內建設定」時不生效——本次切片由檔案自身的設定決定。`,processSettingsInactive:`未啟用`,presetsHidden:`已隱藏 {{count}} 項`,showAllPresets:`顯示全部`,showFewerPresets:`顯示較少`,processSettings:`列印參數`,processSettingsHint:`為本次切片調整所選預設。未變更的項目仍依預設定義。`,processSettingsChanged:`已變更 {{count}} 項`,processSettingsUnchanged:`預設預設值`,title:`切片模型`,action:`切片`,actionAll:`切片全部 {{count}} 個盤面`,actionAllTitle:`將所有盤面切片為單一的多盤面輸出（單一封存）。線材選擇涵蓋專案定義的每個槽位。`,allPlatesToggle:`切片全部 {{count}} 個盤面`,slicing:`切片中…`,printer:`印表機設定檔`,process:`製程設定檔`,filament:`耗材設定檔`,filamentSlot:`耗材 {{index}}（{{type}}）`,filamentColour:`耗材顏色`,selectPreset:`— 選擇預設 —`,loadingPresets:`載入預設中…`,analyzingPlateFilaments:`分析列印板耗材中…`,analyzingPlateFilamentsHint:`正在執行預覽切片以發現此列印板使用的 AMS 插槽。之後會快取 — 重新開啟是即時的。`,previewToast:`分析 {{name}} — {{elapsed}}`,previewWithProgress:`分析 {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— 此列印板未使用`,noPresetsForSlot:`無可用預設`,otherPrinters:`其他印表機`,presetsLoadFailed:`載入預設失敗。請先開啟設定 → 設定檔以匯入。`,refreshPresets:`重新整理`,refreshPresetsTitle:`重新整理預設 — 擷取最新的雲端與打包設定清單（在 Bambu Studio 或 Bambu Handy 中刪除預設後使用）`,allPresetsRequired:`必須選擇所有預設`,useEmbedded:`使用檔案的內建設定`,useEmbeddedHint:`依設計者的設定（外牆、填充、耗材）切片，而非上方的設定檔。因您的印表機與檔案相符而可用。`,autoOrient:`自動擺正模型`,autoOrientHint:`切片前由切片器將每個模型轉到最適合列印的一面，會覆蓋檔案中儲存的朝向。`,autoArrange:`自動排列在熱床上`,autoArrangeHint:`由切片器重新擺放模型，使其不再重疊，會取代檔案自帶的版面配置。`,enqueuing:`提交切片任務中…`,queued:`已排隊…`,failed:`切片失敗。請檢查切片器 sidecar 日誌。`,startedToast:`在背景切片 {{name}}…`,queuedToast:`已排隊：{{name}} — {{elapsed}}`,runningToast:`切片 {{name}} — {{elapsed}}`,runningWithProgress:`{{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,runningWithProgressMultiPlate:`盤面 {{plateIndex}} / {{plateCount}} • {{name}} – {{stage}} ({{percent}}%) – {{elapsed}}`,completedToast:`已切片 {{name}}`,externalWriteFallbackToast:`已儲存到內部庫：無法寫入外部資料夾`,failedTitle:`切片失敗`,failedToast:`切片 {{name}} 失敗：{{detail}}`,tier:{local:`已匯入`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`標準`},cloud:{notAuthenticated:`登入 Bambu Cloud（設定 → 設定檔 → Bambu Cloud）以查看雲端預設。`,expired:`Bambu Cloud 工作階段已過期 — 請重新登入以重新整理雲端預設。`,unreachable:`目前無法存取 Bambu Cloud。本機和標準預設仍可使用。`},orcaCloud:{notAuthenticated:`登入 Orca Cloud（設定檔 → Orca Cloud）以查看您的 Orca 預設。`,expired:`Orca Cloud 工作階段已過期 — 請重新登入以重新整理您的 Orca 預設。`,unreachable:`Orca Cloud 目前無法存取。其他預設仍可正常使用。`},bedType:{label:`列印板`,auto:`自動（使用製程預設）`,coolPlate:`冷板`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`},pipelines:{label:`管線`,applyAria:`套用管線`,applyPrompt:`套用管線…`,empty:`無已儲存管線`,saveButton:`另存為管線`,saveTitle:`將目前四個槽位的選擇儲存為可重複使用的管線`,namePlaceholder:`管線名稱`,nameAria:`新管線名稱`,toast:{applied:`已套用「{{name}}」`,saved:`管線已儲存`,saveFailed:`儲存失敗`}}},spoolman:{title:`Spoolman 整合`,enabled:`Spoolman 已啟用`,url:`Spoolman URL`,connected:`已連線`,disconnected:`未連線`,testConnection:`測試連線`,sync:`同步`,syncing:`同步中...`,lastSync:`上次同步`,linkToSpoolman:`連結到 Spoolman`,openInSpoolman:`在 Spoolman 中開啟`,unlinkSpool:`取消連結耗材`,unlinkConfirmTitle:`取消指派料盤？`,unlinkConfirmMessage:`這將從此插槽中移除料盤。料盤本身的資料將保持不變。`,selectSpool:`選擇耗材`,noUnlinkedSpools:`無未指派的料盤`,linkSuccess:`料盤指派成功`,linkFailed:`料盤指派失敗`,unlinkSuccess:`料盤取消指派成功`,unlinkFailed:`料盤取消指派失敗`,linkedSpool:`已指派料盤`,spoolId:`耗材 ID`,fillSourceLabel:`(Spoolman)`,weight:`重量`,remaining:`剩餘`,disableWeightSync:`停用 AMS 估計重量同步`,disableWeightSyncDesc:`不從 AMS 估計值更新剩餘容量。如果您更喜歡 Spoolman 的用量追蹤而非 AMS 百分比估計，請使用此選項。新耗材仍將使用 AMS 估計值作為初始重量。`,reportPartialUsage:`報告失敗列印的部分用量`,reportPartialUsageDesc:`當列印失敗或被取消時，根據層進度報告估計的耗材使用量。`},locations:{title:`儲存位置`,subtitle:`管理貨架、抽屜等線軸實體存放位置`,add:`新增位置`,addShort:`新增`,edit:`編輯位置`,name:`名稱`,spools:`線軸`,sensors:`感測器`,empty:`尚無儲存位置。建立第一個貨架或抽屜。`,manage:`位置`,createPlaceholder:`例如：A 架、抽屜 1`,nameRequired:`位置名稱為必填`,created:`位置已建立`,updated:`位置已更新`,deleted:`位置已刪除`,saveFailed:`儲存位置失敗`,deleteFailed:`刪除位置失敗`,deleteBlocked:`刪除前請移走此位置上的所有線軸`,confirmDelete:`刪除「{{name}}」？`,confirmDeleteMessage:`此位置將從目錄中移除。請先移走線軸。`,confirmDeleteMessageWithSensors:`此位置將從目錄中移除。請先移走線軸。關聯的感測器也將一併刪除。`},inventory:{title:`耗材庫存`,subtitle:`管理您的料盤`,addToInventory:`新增至庫存`,addToInventoryPending:`正在新增...`,addToInventorySuccess:`料盤已新增至庫存`,addToInventoryFailed:`新增料盤至庫存失敗`,unknownSpoolTitle:`偵測到新耗材`,unknownSpoolMessage:`在 {{location}} 偵測到具有未知 RFID 標籤的料盤。是否立即新增至庫存？`,unknownSpoolSlot:`插槽`,bulk:{selectAllVisible:`選擇所有可見項`,selectRow:`選擇列`,selectGroup:`選擇群組`,selectionCount:`已選 {{count}} 個`,edit:`編輯`,printLabels:`列印標籤`,resetUsage:`重設使用量`,restore:`還原`,archive:`封存`,delete:`刪除`,clearSelection:`清除選擇`,editTitle:`批次編輯料盤`,editSubtitle:`將套用於選取的 {{count}} 個料盤。僅更新勾選的欄位。`,editHint:`在欄位中輸入即可標記為更新 — 僅傳送已勾選的列。留空欄位不會變更料盤（清空欄位僅能在單個料盤中操作）。`,useCustom:`使用「{{value}}」`,toggleField:`切換此欄位的更新`,changeCount:`將更新 {{count}} 個欄位。`,applyPending:`套用中...`,applyButton:`套用於 {{count}} 個料盤`,deleteTitle:`刪除選取的料盤`,archiveTitle:`封存選取的料盤`,restoreTitle:`還原選取的料盤`,resetUsageTitle:`重設選取料盤的使用量`,deleteMessage:`永久刪除 {{count}} 個料盤？此操作無法復原。`,archiveMessage:`封存 {{count}} 個料盤？之後可以還原。`,restoreMessage:`還原 {{count}} 個已封存的料盤？`,resetUsageMessage:`重設 {{count}} 個料盤的「總消耗」計數器？剩餘重量將被保留。`,updateSuccess:`已更新 {{count}} 個料盤`,updateFailed:`批次更新失敗`,updatePartial:`已更新 {{ok}} 個，{{failed}} 個失敗`,updateAllFailed:`{{count}} 個料盤更新全部失敗 — 已保留選擇以便重試`,deleteSuccess:`已刪除 {{count}} 個料盤`,deleteFailed:`批次刪除失敗`,deletePartial:`已刪除 {{ok}} 個，{{failed}} 個失敗`,deleteAllFailed:`{{count}} 個料盤刪除全部失敗 — 已保留選擇以便重試`,archiveSuccess:`已封存 {{count}} 個料盤`,archiveFailed:`批次封存失敗`,archivePartial:`已封存 {{ok}} 個，{{failed}} 個失敗`,archiveAllFailed:`{{count}} 個料盤封存全部失敗 — 已保留選擇以便重試`,restoreSuccess:`已還原 {{count}} 個料盤`,restoreFailed:`批次還原失敗`,restorePartial:`已還原 {{ok}} 個，{{failed}} 個失敗`,restoreAllFailed:`{{count}} 個料盤還原全部失敗 — 已保留選擇以便重試`,invalidHex:`請輸入 6 位十六進位字元 (RRGGBB) 或 8 位 (RRGGBBAA)，否則此欄位不會套用。`},spoolmanMixedContentTitle:`Spoolman 無法透過 HTTPS 載入 — 瀏覽器已封鎖混合內容`,spoolmanMixedContentBody:`Bambuddy 透過您的反向代理以 HTTPS 提供服務，但您的 Spoolman 位址仍為 HTTP。基於安全考量，瀏覽器會封鎖混合內容，因此內嵌的 Spoolman 介面無法載入。Spoolman 也必須可透過 HTTPS 存取。`,spoolmanMixedContentFixReverseProxy:`請將 Spoolman 置於與 Bambuddy 相同的反向代理（Traefik / Nginx / Caddy）之後並啟用 HTTPS，然後在設定中將 Spoolman URL 更新為新的 HTTPS 位址。`,spoolmanMixedContentFixOpenNewTab:`作為替代方案，可在新分頁以 HTTP 開啟 Spoolman — 混合內容規則僅適用於內嵌框架，獨立分頁仍可正常運作。`,spoolmanOpenInNewTab:`在新分頁開啟 Spoolman`,labels:{title:`列印線材標籤`,selectedCount:`已選 {{count}} 項`,pickSpools:`選擇要列印標籤的線材：`,monochrome:`單色（黑白印表機）`,monochromeHint:`移除顏色色塊並加寬文字`,startingPosition:`標籤起始位置`,startingPositionRange:`僅適用於標籤紙範本：L7160 支援 1–21；5160 支援 1–30。`,startingPositionInvalid:`請輸入 1 到 {{capacity}} 之間的整數。`,startingPositionFirst:`從位置 1 開始列印。`,startingPositionSkipped:`第一張標籤紙的位置 1 到 {{lastPosition}} 將留空。`,startingPositionRangeError:`此標籤紙的起始位置必須在 1 到 {{capacity}} 之間。`,searchPlaceholder:`按名稱、品牌或 #ID 搜尋`,filterByMaterial:`材料：`,allMaterials:`全部`,selectVisible:`選擇所有可見 ({{count}})`,deselectVisible:`取消選擇可見`,clearAll:`全部清除`,noSpoolsToShow:`沒有要顯示的線材。請調整篩選條件後重試。`,noMatches:`沒有線材符合目前搜尋或篩選。`,printOne:`列印此線材的標籤`,printLabels:`列印標籤…`,bulkTitle:`從目前顯示的 {{count}} 個線材中選擇要列印標籤的`,noSpoolsTitle:`沒有要貼標籤的線材`,error:`無法產生標籤：{{msg}}`,sortBy:{label:`排序：`,id:`按 ID`,color:`按顏色`},templates:{amsHolderSmall:{label:`AMS 支架 — 小 (74 × 33 mm)`,hint:`每頁一個標籤；對應 MakerWorld 模型 752566 (AMS 耗材標籤支架) 中可列印的標籤。`},amsHolderLarge:{label:`AMS 支架 — 大 (75 × 55 mm)`,hint:`每頁一個標籤；對應 AMS 耗材標籤支架的紙卡插入款。空間足夠放置色塊、品牌、材質、ID 與 QR 碼。`},box40x30:{label:`盒標籤 (40 × 30 mm)`,hint:`每頁一張；常見的 DK/Brother 捲尺寸,適合用於耗材袋與儲物盒標籤。`},box:{label:`Box label (62 × 29 mm)`,hint:`每頁一個標籤；適配 Brother PT/QL 和 Dymo 小標籤。`},averyL7160:{label:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,hint:`歐洲規格紙張；每張 A4 頁 21 個標籤。`},avery5160:{label:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,hint:`美國規格紙張；每張 Letter 頁 30 個標籤。`}}},csv:{importButton:`匯入 CSV`,exportButton:`匯出 CSV`,modalTitle:`從 CSV 匯入耗材`,selectFile:`選擇 CSV 檔案或拖放到此處`,dragHint:`標頭：material（必填）、brand、subtype、color_name、rgba、…`,parsing:`正在讀取檔案…`,previewError:`無法讀取 CSV 檔案`,validCount:`{{count}} 個有效`,errorCount:`{{count}} 個錯誤`,skippedCount:`{{count}} 個略過`,colRow:`列`,colStatus:`狀態`,colColor:`顏色`,colorResolved:`已從目錄填入顏色`,colorCrossMaterial:`顏色取自其他材料 — 目錄中無精確匹配`,duplicateExisting:`已存在具有此材料、品牌和顏色的線材卷 — 仍會作為新線材卷匯入`,spoolmanHint:`在 Spoolman 模式下，請使用 Spoolman 內建的 CSV 匯入/匯出。`,importValidRows:`匯入 {{count}} 個有效列`,noValidRows:`沒有有效列`,importing:`正在匯入…`,importSuccess:`已匯入 {{count}} 個耗材`,importError:`匯入失敗`,exportError:`匯出失敗`},addSpool:`新增耗材`,editSpool:`編輯耗材`,copySpool:`複製耗材`,material:`材料`,selectMaterial:`選擇材料...`,subtype:`子類型`,brand:`品牌`,searchBrand:`搜尋品牌...`,useCustomBrand:`使用"{{brand}}"`,useCustomMaterial:`使用自訂材料：{{material}}`,suggestedOptions:`推薦`,allOptions:`全部`,colorName:`顏色名稱`,colorNamePlaceholder:`翡翠白、烈焰紅...`,color:`顏色`,hexColor:`十六進位顏色`,pickColor:`選擇自訂顏色`,labelWeight:`標籤重量`,coreWeight:`空盤重量`,searchSpoolWeight:`搜尋耗材重量...`,weightUsed:`已使用`,currentWeight:`剩餘重量`,measuredWeight:`稱量重量`,spoolName:`料盤`,costPerKg:`每公斤成本`,storageLocation:`存放位置`,temperature:`溫度`,humidity:`濕度`,battery:`電池`,storageLocationPlaceholder:`例如：貨架A，抽屜1`,openInInventory:`在庫存中查看`,measuredWeightError:`稱量重量必須在 {{min}}g 到 {{max}}g 之間。`,slicerFilament:`切片耗材`,slicerFilamentName:`切片預設名稱`,slicerPreset:`切片預設`,searchPresets:`搜尋耗材預設...`,selectedPreset:`已選擇`,noPresetsFound:`未找到預設`,tempOverrides:`溫度覆蓋`,note:`備註`,notePlaceholder:`關於此耗材的任何備註...`,category:`類別`,categoryPlaceholder:`例如：生產、原型、客戶A`,categoryNone:`未分類`,storageLocationNone:`未設定位置`,lowStockThresholdOverride:`低庫存閾值（此料盤）`,lowStockThresholdOverrideHelp:`留空以使用全域閾值（{{global}}%）。`,clearRfid:`清除 RFID 標籤`,rfidCleared:`RFID 標籤已清除`,archive:`歸檔`,restore:`恢復`,noSpools:`尚無耗材。新增您的第一個耗材開始使用。`,noAvailableSpools:`沒有可用的耗材。請先向庫存中新增耗材，或從其他槽位取消指派一個耗材。`,kProfiles:`K 值設定`,addKProfile:`新增 K 值設定`,assignSpool:`分配耗材`,unassignSpool:`取消分配`,assignSuccess:`耗材已分配，AMS 槽位已設定`,assignPendingInsert:`已分配。插入耗材後將設定槽位。`,assignFailed:`分配耗材失敗`,assignMismatchTitle:`材料不符`,assignMismatchMessage:`所選料盤材料 "{{spoolMaterial}}" 與 {{location}} 的料槽材料 "{{trayMaterial}}" 不符。仍要分配嗎？`,assignMismatchConfirm:`仍然分配`,assignPartialMismatchMessage:`料盤材料 "{{spoolMaterial}}" 與 {{location}} 的 "{{trayMaterial}}" 相近但不完全一致。是否繼續？`,assignProfileMismatchMessage:`料盤設定 "{{spoolProfile}}" 與 {{location}} 的料槽設定 "{{trayProfile}}" 不一致。是否繼續？`,assignReconfigureNote:`AMS 槽位將重新設定為使用料盤的設定。`,selectSpool:`選擇要分配到此槽位的耗材`,assigned:`已分配`,assigning:`分配中...`,searchSpools:`搜尋耗材...`,showAllSpools:`顯示所有耗材`,spoolmanSpools:`Spoolman 線軸`,allMaterials:`所有材料`,filterByBrand:`按品牌篩選...`,showArchived:`顯示已歸檔`,quickAdd:`快速新增（庫存）`,quantity:`數量`,stock:`庫存`,configured:`已設定`,spoolsCreated:`已建立 {{count}} 個耗材`,spoolsPartiallyCreated:`已建立 {{created}} / {{total}} 個耗材（部分失敗）`,spoolCreated:`耗材已建立`,spoolUpdated:`耗材已更新`,spoolDeleted:`耗材已刪除`,deepLinkSpoolNotFound:`找不到耗材`,deepLinkFetchFailed:`無法載入耗材 — 請重試`,spoolArchived:`耗材已歸檔`,spoolRestored:`耗材已恢復`,kProfileSaveFailed:`K值設定檔設定無法儲存`,syncWeightSpoolNotFound:`找不到耗材 — 可能已被刪除`,syncWeightSpoolmanUnreachable:`Spoolman 無法存取 — 請稍後再試`,syncWeightFailed:`重量同步失敗`,spoolmanUnreachable:`Spoolman 無法存取 — 請稍後再試`,deleteSpoolNotFound:`找不到耗材 — 可能已被刪除`,deleteFailed:`刪除耗材失敗`,archiveSpoolNotFound:`找不到耗材 — 可能已被刪除`,archiveFailed:`歸檔耗材失敗`,restoreSpoolNotFound:`找不到耗材 — 可能已被刪除`,restoreFailed:`恢復耗材失敗`,saveFailed:`儲存變更失敗`,tagClearFailed:`清除標籤失敗`,deleteConfirm:`確定要刪除此耗材嗎？此操作無法復原。`,archiveConfirm:`確定要歸檔此耗材嗎？`,advancedSettings:`進階設定`,filamentInfoTab:`耗材資訊`,paProfileTab:`PA 設定`,colorAndCostTab:`顏色與成本`,printersTab:`印表機`,filamentInfo:`耗材`,additional:`附加`,loadingPresets:`載入雲端預設中...`,cloudConnected:`雲端已連線`,cloudNotConnected:`雲端未連線（使用預設值）`,recentColors:`最近`,searchColors:`搜尋顏色...`,searchResults:`搜尋結果`,allColors:`所有顏色`,commonColors:`常用顏色`,showLess:`顯示更少`,showAll:`顯示全部`,noColorsFound:`沒有顏色匹配您的搜尋`,noResults:`未找到匹配項`,extraColorsLabel:`附加顏色`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`貼上 2 至 8 個十六進位色值,以逗號分隔。將以漸層方式呈現。`,extraColorsInvalid:`已略過無效的十六進位值:{{tokens}}`,colorEffectLabel:`效果`,colorEffect:{none:`無`,sparkle:`閃光`,wood:`木紋`,marble:`大理石`,glow:`夜光`,matte:`霧面`,silk:`絲光`,galaxy:`星空`,rainbow:`彩虹`,metal:`金屬`,translucent:`半透明`,gradient:`漸層`,dualColor:`雙色`,triColor:`三色`,multicolor:`多色`},selectMaterialFirst:`請先在耗材資訊分頁中選擇材料。`,noPrintersConfigured:`未設定印表機。新增印表機以使用 PA 設定。`,matchingFilter:`匹配`,anyBrand:`任何品牌`,anyVariant:`任何變體`,autoSelect:`自動選擇`,matches:`匹配`,match:`匹配`,noMatches:`無匹配`,connected:`已連線`,offline:`離線`,printerOffline:`印表機離線。連線後檢視校準設定。`,noKProfilesMatch:`沒有 K 值設定匹配所選耗材。`,leftNozzle:`左噴嘴`,rightNozzle:`右噴嘴`,profilesSelected:`個校準設定已選擇`,filamentPreset:`耗材預設`,presetUseSpoolDefault:`使用線材捲的預設`,presetInherited:`繼承`,presetOverride:`已覆寫`,presetNeedsModel:`此印表機尚未回報機型，因此無法設定專屬預設。`,autoMatchPresets:`自動比對`,autoMatchPresetsHint:`尋找線材捲預設中標示各機型的對應版本`,kProfilesPerPrinter:`K 值設定檔`,kProfileNotSet:`未設定`,kProfileFlowMismatch:`此設定檔是在 {{profile}} 噴嘴上測得的，但目前裝的是 {{fitted}} 噴嘴，因此不會套用`,nozzle:`噴嘴`,unknownModel:`未知機型`,onePrinter:`1 台印表機`,nPrinters:`{{n}} 台印表機`,filamentPresetsLoadFailed:`無法載入此線材捲的各機型預設`,filamentPresetSaveFailed:`無法儲存各機型預設`,totalInventory:`總庫存`,totalConsumed:`總消耗`,byMaterial:`按材料`,inPrinter:`在印表機中`,lowStock:`庫存不足`,sinceTracking:`自開始追蹤`,resetConsumedCounter:`重置計數器`,resetConsumedCounterTooltip:`將此料盤的已消耗克數計數器歸零。剩餘重量不會變更。`,resetConsumedCounterConfirm:`將此料盤的已消耗克數計數器重置為 0？後續列印將從零開始計算。料盤本身、剩餘重量計算與您的設定均不會變更。`,resetAllConsumedCounters:`重置所有計數器`,resetAllConsumedCountersTooltip:`將每個料盤的已消耗克數計數器歸零。剩餘重量不會變更。`,resetAllConsumedCountersConfirm:`將全部 {{count}} 個料盤（含已封存）的已消耗克數計數器重置為 0？這將清空「累計消耗」統計值，後續列印從零開始計算。料盤與剩餘重量不會變更。`,consumedCounterReset:`計數器已重置`,allConsumedCountersReset:`已重置 {{count}} 個料盤的計數器`,resetConsumedCounterFailed:`重置計數器失敗`,loadedInAms:`已裝載到 AMS/外接`,remaining:`剩餘`,weightCheck:`重量檢查`,lastWeighed:`上次稱量`,neverWeighed:`從未稱量`,search:`搜尋耗材...`,showing:`顯示`,to:`到`,of:`共`,show:`顯示`,spools:`個耗材`,spool:`個耗材`,page:`頁`,noSpoolsMatch:`未找到結果`,noSpoolsMatchDesc:`嘗試調整您的搜尋或篩選條件。`,active:`活躍`,archived:`已歸檔`,all:`全部`,used:`已使用`,new:`新的`,clearFilters:`清除篩選`,table:`表格`,cards:`卡片`,net:`淨重`,groupSimilar:`分組`,groupedSpools:`{{count}} 個相同耗材`,groupedRows:`行`,columns:`列`,configureColumns:`設定列`,configureColumnsDesc:`拖曳以重新排序列或使用箭頭。使用眼睛圖示切換可見性。`,visible:`可見`,reset:`重設`,cancel:`取消`,applyChanges:`套用更改`,moveUp:`上移`,moveDown:`下移`,hideColumn:`隱藏列`,showColumn:`顯示列`,linkToSpool:`連結到耗材`,tagLinked:`標籤已連結到耗材`,tagLinkFailed:`連結標籤失敗`,tagAlreadyLinked:`標籤已連結到耗材 #{{id}}`,unknownTag:`偵測到未知 RFID 標籤`,usageHistory:`使用歷史`,noUsageHistory:`尚無使用紀錄`,printName:`列印名稱`,weightConsumed:`消耗重量`,clearHistory:`清除`,historyCleared:`使用歷史已清除`,fillSourceLabel:`(庫存)`,lowStockThresholdError:`閾值必須在 0.1 到 99.9 之間`,spoolmanFilamentCatalog:`Spoolman 耗材目錄`,pickFromSpoolmanCatalog:`從 Spoolman 目錄選擇…`,spoolmanFilamentSelected:`已從 Spoolman 目錄選擇耗材`,spoolmanFilamentUnlinked:`已解除耗材目錄關聯`,noSpoolmanFilaments:`Spoolman 目錄中未找到耗材`,spoolmanFilamentColorSwatch:`耗材顏色`,spoolWeightManagedBySpoolman:`空線軸重量在 Spoolman 中按耗材類型管理`,spoolmanCatalogLoadFailed:`無法載入 Spoolman 耗材目錄`},timelapse:{title:`縮時攝影`,create:`建立縮時攝影`,download:`下載`,delete:`刪除`,preview:`預覽`,frameRate:`幀率`,quality:`品質`,processing:`處理中...`,noTimelapses:`無可用縮時攝影`},ams:{title:`AMS`,slot:`槽位`,empty:`空`,emptySlot:`空槽位`,slotEmpty:`空`,slotUnconfigured:`?`,emptySlotReset:`未指派線材`,unknown:`未知`,humidity:`濕度`,temperature:`溫度`,filamentType:`耗材類型`,filamentColor:`顏色`,remaining:`剩餘`,history:`AMS 歷史`,noHistory:`無可用歷史`,configureSlot:`設定槽位`,externalSpool:`外接耗材`,profile:`設定`,kFactor:`K 值`,kFactorShort:`K 值`,fill:`填充`,configure:`設定`,used:`已使用`,remainingUnit:`剩餘`},printModal:{variants:{editNote:`這些備選在工作加入佇列時確定。如需變更，請取消後重新加入佇列。`,title:`印表機備選`,help:`一項工作，佔一個佇列位。第一台空閒且相符的印表機會列印它對應的檔案。`,unknownModel:`未知型號`,plateFor:`{{filename}} 的列印板`,moveUp:`上移`,moveDown:`下移`,queued:`已加入佇列，含 {{count}} 個備選`},selectPrinter:`選擇印表機`,selectPlate:`選擇板`,filamentMapping:`耗材對應`,useArchiveMapping:`對應`,useArchiveMappingTooltip:`從此封存儲存的 AMS 對應（來自切片軟體）中選取所有槽位，而不是依類型/顏色比對。`,clickToChangeSlot:`點擊更改槽位分配`,reRead:`重新讀取`,plateN:`板 {{n}}`,plateFilamentsUnreadable:`無法讀取所選盤的耗材資訊，因此無法進行對應。取消選取該盤即可將其餘盤加入佇列。`,totalCost:`總成本：`,slotRemainingShort:` - 剩餘 {{grams}}g`,printSettings:`列印設定`,bedLeveling:`熱床調平`,flowCalibration:`流量校準`,vibrationCalibration:`振動校準`,layerInspection:`首層檢查`,timelapse:`縮時攝影`,cancel:`取消`,noPrintersAvailable:`無可用印表機`,printerBusy:`印表機忙碌`,printerOffline:`印表機離線`,sameTypeDifferentColor:`相同類型，不同顏色`,filamentTypeNotLoaded:`耗材類型未裝載`,statusReady:`就緒`,statusColorMismatch:`顏色不符`,statusTypeNotFound:`找不到類型`,requiredTooltip:`需要：{{name}} - {{color}}`,manuallySelected:`手動選擇`,autoMatched:`自動比對`,selectSlot:`選擇插槽`,exactColorMatch:`顏色完全相符`,slotForFilament:`{{name}} 的印表機插槽`,overrideForFilament:`{{name}} 的耗材覆蓋`,sameTypeDifferentColorDetail:`相同類型，不同顏色：需要 {{required}}，插槽為 {{loaded}}`,requiredTypeNotInPrinter:`印表機中找不到所需的耗材類型。`,whenToPrint:`何時列印`,asap:`盡快`,queue:`佇列`,schedule:`排程`,dateTime:`日期和時間`,invalidDateTime:`請輸入有效的日期和時間`,openCalendar:`開啟日曆`,requireManualStart:`要求手動開始`,requirePreviousSuccess:`僅在上一次列印成功後開始`,autoOffAfter:`完成後關閉印表機`,helpAsap:`列印將新增到佇列頂端，並在符合條件的印表機閒置後立即開始。`,helpSchedule:`如果印表機閒置，列印將在排程時間開始。如果印表機忙碌，則會等待其可用。`,helpQueue:`列印將新增到佇列末端。`,leftNozzle:`左`,rightNozzle:`右`,leftNozzleTooltip:`左噴嘴`,rightNozzleTooltip:`右噴嘴`,ftsSameInletHint:`本次列印的所有耗材都在耗材變軌器 IN-{{inlet}} 上。同一入口的耗材之間切換較慢，可將其中一捲移到另一入口的 AMS。`,rackPosition:`刀架位置`,rackPositionTooltip:`由刀架上的哪個噴嘴列印此耗材。位置編號與印表機上一致。`,rackEmptyPosition:`此刀架位置為空`,rackWrongNozzle:`裝有 {{has}} 噴嘴；此耗材需要 {{needs}}`,filamentOverride:`耗材覆蓋`,filamentOverrideHint:`可選覆蓋用於基於模型的耗材分配。排程器將使用您選擇的耗材而不是原始 3MF 值進行匹配。`,originalFilament:`原始`,overrideWith:`覆蓋為`,resetToOriginal:`恢復為原始`,insufficientFilamentTitle:`耗材不足`,waitingForAmsStatus:`正在等待 {{printer}} 的 AMS 狀態…`,insufficientFilamentMessage:`部分已分配料盤的剩餘耗材少於本次列印所需：`,insufficientFilamentLine:`{{printer}} - {{slot}}：需要 {{required}}g，剩餘 {{remaining}}g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}：需要 {{required}}g，相符料卷共剩餘 {{remaining}}g（AMS 備用料盤）`,printAnyway:`仍然列印`,forceColorMatch:`強制顏色匹配`,staggerPrinterStarts:`錯開印表機啟動`,staggerGroupSize:`群組大小`,staggerInterval:`間隔（分鐘）`,staggerPreview:`{{printers}} 台印表機 → 分成 {{groups}} 組，每組 {{size}} 台，每 {{interval}} 分鐘啟動一組`,staggerLastGroup:`最後一組：{{count}}`,staggerTotal:`總計：{{minutes}} 分鐘`,staggerToPrinters:`分批傳送到 {{count}} 臺印表機`,gcodeInjection:`注入自動列印G-code`,insufficientBudget:`預算不足`,unlimitedNoBudget:`無限制 – 未設定預算上限。`,noPrintableCostCenters:`沒有可用於列印的有效成本中心。請聯絡管理員授予你列印權限。`},backup:{includesEncryptionKey:`本機備份包含 MFA 加密金鑰檔案（DATA_DIR/.mfa_encryption_key），因此備份 ZIP 是自包含的。請將 ZIP 視為敏感檔案 — 任何擁有該檔案的人都可以解密內部儲存的 OIDC 用戶端機密和 TOTP 機密。`,title:`備份與恢復`,createBackup:`建立備份`,restoreBackup:`恢復備份`,restoreDescription:`從備份檔案替換所有資料`,downloadBackup:`下載備份`,uploadBackup:`上傳備份`,lastBackup:`上次備份`,autoBackup:`自動備份`,backupNow:`立即備份`,restoreWarning:`警告：恢復備份將覆蓋所有目前資料。`,includeArchives:`包含歸檔`,includeSettings:`包含設定`,includeProfiles:`包含設定檔案`,backupSuccess:`備份建立成功`,restoreSuccess:`備份恢復成功`,backupFailed:`備份失敗`,restoreFailed:`恢復失敗`,restoreNote:`恢復期間虛擬印表機將停止`,githubBackup:`GitHub 備份`,enabled:`已啟用`,cloudLoginRequired:`需要登入 Bambu Cloud。請在 設定檔案 → 雲設定檔案 中登入以啟用 GitHub 備份。`,cloudLoginRequiredShort:`需要雲端登入`,githubDescription:`自動將您的設定檔案同步到私有 GitHub 倉庫以進行備份和版本歷史紀錄。`,repoIsPrivate:`儲存庫為私有 — 可安全備份。`,repoIsPublicWarning:`儲存庫為公開（PUBLIC）。Bambuddy 備份包含 MQTT 認證、Home Assistant 權杖、Prometheus 權杖、您的 Bambu Cloud 電子郵件，以及透過 K-profile 暴露的印表機存取碼。在您於服務商設定中將儲存庫改為私有之前，儲存將被阻擋。`,repoVisibilityUnknown:`無法確認儲存庫的可見性。Bambuddy 拒絕向任何未確認為私有的目標進行備份；儲存將被阻擋。`,repositoryUrl:`倉庫 URL`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`允許不安全的 HTTP`,allowInsecureHttpHint:`為無 TLS 的私人網路自托管執行個體啟用`,personalAccessToken:`個人存取權杖`,tokenSaved:`（已儲存）`,enterNewToken:`輸入新權杖以更新`,tokenHintGitHub:`具有 Contents 讀寫權限的細粒度權杖，或具有 repo 範圍的傳統權杖。`,tokenHintGitLab:`具有 api 範圍的權杖，或同時具有 read_repository 與 write_repository。`,tokenHintGitea:`具有 write:repository 範圍的權杖。`,tokenHintForgejo:`具有 write:repository 範圍的權杖。僅限於此存放庫的權杖即可。`,branch:`分支`,provider:`Git 供應商`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`僅手動`,hourly:`每小時`,daily:`每天`,weekly:`每週`,includeInBackup:`包含在備份中`,kProfiles:`K 設定檔案`,kProfilesDescription:`來自已連線印表機的壓力推進校準`,noPrintersConnected:`沒有印表機連線`,printersConnected:`{{connected}}/{{total}} 已連線`,cloudProfiles:`雲設定檔案`,cloudProfilesDescription:`來自 Bambu Cloud 和 Orca Cloud 的耗材、印表機和工藝預設`,cloudProfilesAccounts:`已連線帳戶 — Bambu Cloud：{{bambu}}，Orca Cloud：{{orca}}`,appSettings:`應用程式設定`,appSettingsDescription:`Bambuddy 設定（完整資料庫）`,spoolInventory:`耗材庫存`,spoolInventoryDescription:`耗材卷軸、使用紀錄和成本追蹤`,printArchives:`列印檔案`,printArchivesDescription:`列印歷史中繼資料（不含 gcode/3MF 檔案）`,lastBackupAt:`上次備份：`,noBackupsYet:`尚無備份`,next:`下次：`,startingBackup:`正在啟動備份...`,test:`測試`,enableBackup:`啟用備份`,testConnection:`測試連線`,enterRepoUrl:`請輸入倉庫 URL`,enterRepoAndToken:`請輸入倉庫 URL 和存取權杖`,repoRequired:`倉庫 URL 為必填項`,tokenRequired:`存取權杖為必填項`,githubBackupEnabled:`GitHub 備份已啟用`,tokenUpdated:`權杖已更新`,settingsSaved:`設定已儲存`,failedToSave:`儲存失敗：{{message}}`,backupCompleteFiles:`備份完成 - {{count}} 個檔案已更新`,backupSkippedNoChanges:`備份已跳過 - 無更改`,backupFailed2:`備份失敗：{{message}}`,clearedLogs:`已清除 {{count}} 條日誌`,failedToClearLogs:`清除日誌失敗：{{message}}`,restoreFromGit:{button:`從 Git 還原`,title:`從 Git 備份還原`,subtitle:`選擇提交以及要還原的項目`,commitLabel:`備份提交`,latestCommit:`最新備份（分支最新提交）`,categoriesLabel:`還原項目`,inspecting:`正在讀取備份內容...`,itemCount:`備份中有 {{count}} 筆`,overwriteLabel:`覆寫既有項目`,overwriteOn:`既有項目將依備份內容更新。`,overwriteOff:`僅新增缺少的項目，既有項目保持不變。`,selectedCount:`已選擇 {{count}} 筆`,restoring:`正在還原...`,confirmTitle:`要從備份還原嗎？`,confirmMessage:`將從此提交還原所選類別。缺少的項目會被新增，既有項目保持不變。`,confirmMessageOverwrite:`將從此提交還原所選類別，並覆寫本機已存在的項目。此操作無法復原。`,kprofilesOverwriteCaveat:`K 值設定檔是例外：寫入插槽一定會取代印表機上的校準資料。`,tally:`已還原 {{restored}} 筆、略過 {{skipped}} 筆、失敗 {{failed}} 筆`,reloadHint:`請重新載入 Bambuddy，讓還原的資料在各處生效。`,partialHint:`上方列出的類別已完成並已儲存。未列出的類別沒有執行。`,failed:`還原失敗。`,loadFailed:`無法讀取備份儲存庫。`,details:{notPresent:`此備份提交中不存在`,unreadableJson:`無法解析的 JSON：{{paths}}`,settingsNoPayload:`資料中沒有設定`,settingsCredentialsWillSkip:`將略過 {{count}} 個疑似憑證的鍵`,settingsCompanionWillSkip:`將略過 {{count}} 個疑似憑證的鍵，依賴它們的 {{companion}} 個開關會維持關閉`,settingsCompanionOnlyWillSkip:`{{companion}} 個開關會維持關閉 - 每個開關所需的憑證無法從備份還原`,spoolsUsageCount:`其中含 {{count}} 筆使用紀錄`,archivesMetadataOnly:`僅中繼資料 - 3MF 檔案與縮圖不在 Git 備份中`,kprofilesPrinterCount:`涵蓋 {{count}} 台印表機`},notes:{noData:`此備份中沒有這類資料`,archivesPrinterMissing:`部分封存參照了已不存在的印表機 - 已清除連結`,archivesProjectMissing:`部分封存參照了已不存在的專案 - 已清除連結`,archivesOwnerCleared:`部分封存參照了已不存在的使用者 - 已清除擁有者，因此在管理員重新指派之前，只有具備 archives:read_all 權限的使用者才看得到`,archivesOwnerUnmatched:`部分封存指向本執行個體沒有的使用者 - 已清除擁有者，而非依備份中的使用者 ID 推測，因此在管理員重新指派之前，只有具備 archives:read_all 權限的使用者才看得到`,archivesOwnerUnknown:`部分封存還原時沒有擁有者 - 此備份未記錄擁有者，因此在管理員指派之前，只有具備 archives:read_all 權限的使用者才看得到`,archivesUndeleted:`備份之後刪除的封存重新可見 - 當時啟用了覆寫`,archivesMetadataOnly:`還原的封存僅含中繼資料 - 3MF 檔案與縮圖不在 Git 備份中`,spoolUsageUnresolved:`已略過 {{count}} 筆使用紀錄 - 其耗材捲不在此備份的耗材清單中，沒有可掛接的對象。`,spoolUsageUnlinked:`已還原 {{count}} 筆使用紀錄，但缺少列印歷史連結 - 請同時選擇「列印封存」與「耗材庫存」以保留該連結。`,spoolTagKept:`{{count}} 個耗材標籤維持原樣 - 依備份內容會清除此後掃描過的標籤，或把它移到另一捲耗材上。`,settingsCredentialsSkipped:`已略過 {{count}} 個疑似憑證的鍵 - 請手動重新輸入密鑰`,settingsAuthSkipped:`已略過 {{count}} 項驗證設定 - 請在「設定 > 驗證」中修改，讓鎖定檢查繼續生效`,settingsCompanionSkipped:`{{keys}} 維持關閉 - 它們各自所需的憑證無法從備份還原，本執行個體也沒有儲存，開啟會讓整合處於未驗證狀態`,settingsMqttRelayFailed:`MQTT 設定已還原，但中繼無法重新連線 - 請重新啟動 Bambuddy`,kprofilesAlwaysOverwrite:`K 值設定檔一律覆寫印表機上對應的插槽`,kprofilesAckUnreliable:`印表機未回應時仍計為已還原 - 請在印表機上核對設定檔`,kprofilesPrinterMissing:`沒有序號為 {{serial}} 的印表機 - 已略過`,kprofilesPrinterOffline:`{{printer}}（{{serial}}）未連線 - 已略過`,kprofilesUnknownNozzle:`{{serial}} 的噴嘴直徑 {{nozzle}} 不在預期範圍內 - 已原樣傳送`,kprofilesUnmatched:`{{nozzle}} 的 {{count}} 個設定檔在 {{printer}} 上沒有對應項 - 已新增為新設定檔`,kprofilesSendFailed:`無法將 {{nozzle}} 的設定檔傳送到 {{printer}}（{{serial}}）`,kprofilesRefused:`{{printer}}（{{serial}}）拒絕了 {{nozzle}} 的設定檔：{{reason}}`,kprofilesStepFailed:`K 值設定檔步驟未能完成 - {{reason}}。在此之前還原的內容仍已儲存。`}},history:`歷史紀錄`,clear:`清除`,date:`日期`,status:`狀態`,trigger:`類型`,triggers:{manual:`備份（手動）`,scheduled:`備份（排程）`,restore:`還原`},commit:`提交`,localBackup:`本機備份`,localBackupDescription:`建立 Bambuddy 資料的完整備份，包括資料庫、檔案、上傳和所有檔案。`,downloadBackupLabel:`下載備份`,completeBackupZip:`完整備份：資料庫 + 所有檔案（ZIP）`,download:`下載`,preparingBackup:`正在準備備份...`,creatingArchive:`正在建立備份歸檔...對於大型歸檔可能需要一些時間。`,downloadingFile:`正在下載備份檔案...`,backupDownloaded:`備份下載成功`,failedToCreateBackup:`建立備份失敗：{{message}}`,restore:`恢復`,restoreReplacesAll:`恢復將替換所有資料。`,restoreReplacesAllDetail:`您目前的資料庫和檔案將被完全替換。恢復後需要重新啟動。`,restoreConfirmTitle:`恢復備份`,restoreConfirmMessage:`您確定要從"{{filename}}"恢復嗎？這將完全替換您目前的資料庫和所有檔案。恢復後需要重新啟動應用程式。`,restoreConfirmButton:`恢復備份`,uploadingFile:`正在上傳備份檔案...`,backupRestoredRestart:`備份已恢復。請重新啟動 Bambuddy。`,failedToRestore:`恢復備份失敗。請檢查檔案格式。`,reloadNow:`立即重新載入`,creatingBackup:`正在建立備份`,restoringBackup:`正在恢復備份`,preparing:`準備中...`,processing:`處理中...`,doNotClosePage:`請不要關閉此頁面或離開頁面。對於大型備份，此操作可能需要幾分鐘。`,restoring:`恢復中...`,restoreComplete:`恢復完成`,restoreFailed2:`恢復失敗`,importSettings:`從備份檔案匯入設定`,pleaseWaitRestoring:`請等待資料恢復中`,selectBackupFile:`點選選擇備份檔案（.json 或 .zip）`,duplicateHandling:`重複項處理方式：`,matchPrinters:`印表機`,matchPrintersBy:`按序列號匹配`,matchSmartPlugs:`智慧插座`,matchSmartPlugsBy:`按 IP 位址匹配`,matchNotificationProviders:`通知提供者`,matchNotificationProvidersBy:`按名稱匹配`,matchFilaments:`耗材`,matchFilamentsBy:`按名稱 + 類型 + 品牌匹配`,matchArchives:`檔案`,matchArchivesBy:`按內容雜湊匹配（始終跳過）`,matchPendingUploads:`待上傳`,matchPendingUploadsBy:`按檔名匹配`,matchSettingsTemplates:`設定和範本`,matchSettingsTemplatesBy:`始終覆蓋`,replaceExisting:`替換現有資料`,keepExisting:`保留現有資料`,overwriteDescription:`用備份資料覆蓋已存在的項目`,keepDescription:`僅恢復尚不存在的項目`,overwriteCaution:`注意：`,overwriteWarning:`覆蓋將用備份資料替換您目前的設定。出於安全考慮，印表機存取碼永遠不會被覆蓋。`,cancel:`取消`,processingBackup:`正在處理備份檔案...`,itemsRestored:`已恢復項目`,itemsSkipped:`已跳過項目`,restored:`已恢復`,skippedAlreadyExist:`已跳過（已存在）`,filesCategory:`檔案（3MF、縮圖等）`,andMore:`...還有 {{count}} 項`,newApiKeysGenerated:`已產生新的 API 金鑰`,keysShownOnce:`這些金鑰僅顯示一次。請立即複製！`,copy:`複製`,noDataFound:`在備份檔案中未找到可恢復的資料。`,close:`關閉`,scheduledBackup:`排程備份`,scheduledBackupDescription:`依排程自動建立備份快照。輸出目錄可掛載到 NAS 或外部儲存。`,frequency:`頻率`,backupTime:`時間`,retention:`保留`,retentionDescription:`保留的備份數量`,outputPath:`輸出路徑`,outputPathPlaceholder:`預設：{{path}}`,outputPathDescription:`留空以使用預設位置`,runNow:`立即執行`,backupFiles:`備份檔案`,noScheduledBackups:`尚無備份`,deleteBackup:`刪除`,deleteBackupConfirm:`要刪除此備份檔案嗎？`,backupRunning:`備份進行中…`,scheduledBackupComplete:`備份已成功完成`,scheduledBackupFailed:`備份失敗`,nextBackup:`下次備份`,backupSize:`大小`,localTimeHint:`本地時間 ({{tz}})`,defaultPathLabel:`預設：`,pathCheck:{title:`Bambuddy 無法寫入此目錄`,howToFix:`解決方法：`,sandboxed:`Bambuddy 服務無法寫入 {{path}}。其 systemd unit 以 ProtectSystem=strict 執行，因此安裝、資料與記錄目錄以外的所有目錄對服務而言都是唯讀的，即使你自己的 shell 可以寫入也一樣。`,read_only:`{{path}} 位於唯讀檔案系統上。`,permission_denied:`Bambuddy 沒有寫入 {{path}} 的權限。請檢查該目錄的擁有者與權限。`,no_space:`{{path}} 所在的檔案系統已滿。`,not_a_directory:`{{path}} 存在，但不是目錄。`,missing:`{{path}} 不存在且無法建立。`,error:`Bambuddy 無法寫入 {{path}}。`,ephemeralTitle:`這些備份在容器重建後會遺失`,container_ephemeral:`{{path}} 位於 Bambuddy 容器內，而非主機上。寫入其中的備份會在容器重建時遺失。請從主機掛載該目錄：`},categories:{settings:`設定`,notification_providers:`通知提供者`,notification_templates:`通知範本`,smart_plugs:`智慧插座`,printers:`印表機`,filaments:`耗材`,maintenance_types:`維護類型`,archives:`檔案`,projects:`專案`,pending_uploads:`待上傳`,external_links:`外部連結`,api_keys:`API 金鑰`}},tags:{title:`標籤`,addTag:`新增標籤`,editTag:`編輯標籤`,deleteTag:`刪除標籤`,tagName:`標籤名稱`,tagColor:`標籤顏色`,noTags:`無標籤`,deleteConfirm:`確定要刪除此標籤嗎？`,manageTags:`管理標籤`},uploadModal:{title:`上傳 3MF 檔案`,dragDrop:`將 .3mf 檔案拖放到此處`,or:`或`,browseFiles:`瀏覽檔案`,extractionInfo:`將從 3MF 檔案中繼資料中自動提取印表機型號。`,uploaded:`已上傳`,failed:`失敗`,uploading:`上傳中...`,upload:`上傳`,uploadFailed:`上傳失敗`},editArchive:{title:`編輯歸檔`,name:`名稱`,namePlaceholder:`列印名稱`,printer:`印表機`,noPrinter:`無印表機`,project:`專案`,noProject:`無專案`,itemsPrinted:`列印數量`,itemsPrintedHelp:`此列印任務中生產的物品數量。整塊列印板報廢時填 0。`,filamentUsed:`已用耗材 (g)`,filamentUsedPlaceholder:`例如 46.16`,filamentUsedHelp:`當列印工作在沒有 3MF 的情況下封存時，可手動填寫，使其仍計入耗材總量。重新掃描具有 3MF 的封存項目時，此數值會從檔案重新讀取。`,notes:`備註`,notesPlaceholder:`新增關於此列印的備註...`,externalLink:`外部連結`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`連結到 Printables、Thingiverse 或其他來源`,tags:`標籤`,tagsPlaceholder:`新增標籤...`,addMoreTags:`新增更多標籤...`,matchingTags:`匹配"{{query}}"`,existingTags:`現有標籤`,clickToAdd:`（點選新增）`,status:`狀態`,failureReason:`失敗原因`,selectReason:`選擇原因...`,photos:`列印成品照片`,photosHelp:`點選 + 新增列印成品照片`,printResult:`列印成品`,saving:`儲存中...`,failureReasons:{adhesionFailure:`附著力失敗`,spaghettiDetached:`拉絲 / 脫落`,layerShift:`層偏移`,cloggedNozzle:`噴嘴堵塞`,filamentRunout:`耗材用完`,warping:`翹曲`,stringing:`拉絲`,underExtrusion:`擠出不足`,powerFailure:`斷電`,userCancelled:`使用者取消`,noStatusUpdate:`未收到狀態更新`,other:`其他`},statuses:{completed:`已完成`,failed:`失敗`,aborted:`已取消`,printing:`列印中`}},kProfiles:{title:`K 值設定`,noPrintersConfigured:`未設定印表機`,addPrinterInSettings:`在設定中新增印表機以管理 K 值設定`,noActivePrinters:`無活躍印表機`,enablePrinterConnection:`啟用印表機連線以檢視其 K 值設定`,loadingProfiles:`載入 K 值設定中...`,printerOffline:`印表機離線`,printerOfflineDesc:`所選印表機未連線。開啟電源以檢視 K 值設定。`,noMatchingProfiles:`無匹配的設定`,noMatchingProfilesDesc:`沒有設定匹配您的搜尋條件`,noKProfiles:`無 K 值設定`,noKProfilesDesc:`未找到 {{diameter}}mm 噴嘴的壓力推進設定`,createFirstProfile:`建立第一個設定`,printer:`印表機`,nozzle:`噴嘴`,refresh:`重新整理`,addProfile:`新增設定`,export:`匯出`,import:`匯入`,select:`選擇`,selectAll:`全選`,delete:`刪除`,searchPlaceholder:`按名稱或耗材搜尋...`,allExtruders:`所有擠出機`,leftOnly:`僅左側`,rightOnly:`僅右側`,allFlow:`所有流量`,hfOnly:`僅高流量`,sOnly:`僅標準`,sortName:`排序：名稱`,sortKValue:`排序：K 值`,sortFilament:`排序：耗材`,leftExtruder:`左擠出機`,rightExtruder:`右擠出機`,modal:{addTitle:`新增 K 值設定`,editTitle:`編輯 K 值設定`,profileName:`設定名稱`,profileNamePlaceholder:`我的 PLA 設定`,kValue:`K 值`,kValuePlaceholder:`0.020`,kValueHelp:`典型範圍：PLA 0.01 - 0.06，PETG 0.02 - 0.10`,filament:`耗材`,selectFilament:`選擇耗材...`,source:{local:`已匯入`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`內建`},noFilamentsHelp:`沒有可用的耗材。請登入 Bambu Cloud，或在「設定檔 → 本地設定檔」中匯入預設。`,searchFilaments:`搜尋耗材...`,noFilamentMatches:`沒有符合搜尋條件的耗材`,flowType:`流量類型`,highFlow:`高流量`,standard:`標準`,nozzleSize:`噴嘴尺寸`,extruder:`擠出機`,extruders:`擠出機`,left:`左`,right:`右`,notes:`備註（本機儲存）`,notesPlaceholder:`新增關於此設定的備註...`,notesHelp:`備註儲存在 Bambuddy 中，不在印表機上`,syncing:`與印表機同步中...`,savingExtruder:`儲存到擠出機 {{current}}/{{total}}...`,pleaseWait:`請稍候`},deleteConfirm:{title:`刪除設定`,cannotUndo:`此操作無法復原`,message:`確定要從印表機刪除"{{name}}"嗎？`},bulkDelete:{title:`刪除設定`,cannotUndo:`此操作無法復原`,message:`確定要從印表機刪除 {{count}} 個選中的設定嗎？`},toast:{profileSaved:`K 值設定已儲存`,profilesSaved:`K 值設定已儲存到 {{count}} 個擠出機`,selectAtLeastOneExtruder:`請至少選擇一個擠出機`,selectFilament:`請先選擇耗材`,filamentNotResolvable:`沒有與 {{name}} 對應的 Bambu 耗材 ID，印表機無法儲存該設定檔`,profileDeleted:`K 值設定已刪除`,profilesDeleted:`已刪除 {{count}} 個設定`,exportedProfiles:`已匯出 {{count}} 個設定`,importedProfiles:`已匯入 {{count}} / {{total}} 個設定`,noProfilesToExport:`無可匯出的設定`,invalidFileFormat:`無效的檔案格式`,failedToParseImport:`解析匯入檔案失敗`,failedToSaveBatch:`批次儲存 K 值設定失敗`,noteSaved:`備註已儲存`,failedToSaveNote:`儲存備註失敗`},permission:{noRead:`您沒有重新整理設定的權限`,noCreate:`您沒有新增設定的權限`,noUpdate:`您沒有更新 K 值設定的權限`,noDelete:`您沒有刪除 K 值設定的權限`,noExport:`您沒有匯出設定的權限`,noImport:`您沒有匯入設定的權限`}},virtualPrinter:{title:`虛擬印表機`,running:`執行中`,stopped:`已停止`,description:{default:`啟用虛擬印表機，使其在 Bambu Studio 和 OrcaSlicer 中可見。傳送到此印表機的檔案將直接歸檔而不列印。`,proxy:`啟用代理，將切片軟體流量中繼到真實印表機，允許在任何網路上遠端列印。`},enable:{title:`啟用虛擬印表機`,visibleInSlicer:`在切片軟體發現中顯示為"Bambuddy"`,proxyingTo:`代理到 {{name}}`,notActive:`未啟用`},model:{title:`印表機型號`,description:`選擇要模擬的印表機型號。`,restartWarning:`更改型號將重新啟動虛擬印表機`},accessCode:{title:`存取碼`,isSet:`存取碼已設定`,notSet:`未設定存取碼 - 需要設定才能啟用`,placeholder:`輸入 8 位字元程式碼`,placeholderChange:`輸入新程式碼以更改`,hint:`必須恰好 8 個字元。切片軟體使用此程式碼進行認證。`,charCount:`({{count}}/8)`,inheritedFromTarget:`繼承自目標印表機`,derivedFromTargetHint:`使用目標印表機的存取碼。橋接會將切片軟體的認證轉發到實際印表機，因此兩個存取碼必須相符 — 如需變更，請在印表機設定中編輯存取碼。`,reveal:`顯示存取碼`,hide:`隱藏存取碼`},targetPrinter:{title:`目標印表機`,configured:`代理目標已設定`,notConfigured:`未選擇目標印表機 - 代理模式需要設定`,placeholder:`選擇印表機...`,hint:`選擇要將切片軟體流量代理到的印表機。印表機必須處於區域網路模式。`,noPrinters:`未設定印表機。請先新增印表機以使用代理模式。`},remoteInterface:{title:`網路介面覆蓋`,configured:`介面覆蓋已啟用`,optional:`可選 - 當自動檢測的 IP 不正確時使用（例如多網路卡、Docker、VPN）`,placeholder:`自動檢測（預設）...`,hint:`覆蓋透過 SSDP 廣播並在 TLS 憑證中使用的 IP 位址。在 Bambuddy 有多個網路介面時很有用。`},mode:{title:`模式`,archive:`歸檔`,archiveDesc:`立即歸檔檔案`,review:`審核`,reviewDesc:`歸檔前審核`,queue:`佇列`,queueDesc:`歸檔並新增到佇列`,proxy:`代理`,proxyDesc:`中繼到真實印表機`},autoDispatch:{title:`自動派發`,description:`新增到佇列時自動開始列印。關閉後，列印任務等待手動派發。`},queueForceColorMatch:{title:`強制顏色匹配`,description:`拒絕派發到沒有完全相同耗材類型和顏色的印表機。預設關閉 — 不啟用時，佇列僅按型號匹配，可能選到顏色錯誤的印表機。`},saveAmsMapping:{title:`儲存 AMS 對應`,description:`將切片軟體自行選擇的 AMS 槽位（來自 project_file MQTT 指令）儲存到封存中，讓之後的重新列印能重複使用同一捲實體線材，而不是依檔案的類型/顏色重新推導。預設關閉。`},gcodeInjection:{title:`G-code 注入`,description:`將「設定」中依型號設定的 G-code 片段套用到此 VP 的作業。預設關閉。`},tailscaleDisabled:{title:`Tailscale 整合`,description:`啟用以將此 VP 標記為透過 Tailscale 公開。顯示主機的 Tailscale 位址，以便您知道要貼上到切片器中的 IP。CA 匯入步驟保持不變 — 此切換對憑證無影響。`},setupRequired:{title:`需要設定`,description:`虛擬印表機功能需要額外的系統設定才能工作。包括埠轉發、防火牆規則和平臺特定設定。`,readGuide:`啟用前請閱讀設定指南`},archiveNameSource:{title:`存檔名稱來源`,description:`選擇透過虛擬印表機接收檔案時新存檔的命名方式。"元資料"使用 3MF 中嵌入的切片標題（預設）。"檔名"使用 Bambu Studio 透過 FTP 傳送的檔案名稱。注意：當 3MF 包含標題欄位時，Bambu Studio 會以該欄位覆寫您在"傳送到印表機"對話方塊中輸入的名稱，因此兩種模式通常會產生相同的字串。`,metadata:`元資料`,filename:`檔名`},caCert:{title:`切片軟體憑證`,description:`虛擬印表機使用由 Bambuddy CA 簽發的 TLS 憑證。將此 CA 憑證匯入切片軟體的信任庫一次，切片軟體即可接受連線 — 無需再透過命令列取得。`,copy:`複製`,copied:`已複製`,download:`下載`,fingerprint:`SHA-256`},howItWorks:{title:`工作原理`,step1:`在同一區域網路中，虛擬印表機會透過發現機制自動出現在您的切片軟體（Bambu Studio / OrcaSlicer）中。從其他網路，透過 IP 位址和存取碼手動新增。`,step2:`在歸檔、審核和佇列模式下，使用切片軟體中的"傳送"按鈕將 3MF 檔案上傳到 Bambuddy。切片軟體會顯示"列印成功"— 檔案已儲存，未列印。`,step3:`在代理模式下，虛擬印表機將所有流量中繼到真實印表機 — 列印會立即開始，就像直接連線一樣。`},status:{title:`狀態詳情`,printerName:`印表機名稱`,model:`型號`,serialNumber:`序列號`,mode:`模式`,pendingFiles:`待處理檔案`,targetPrinter:`目標印表機`,ftpPort:`FTP 連接埠`,mqttPort:`MQTT 連接埠`,ftpConnections:`FTP 連線`,mqttConnections:`MQTT 連線`},toast:{updated:`虛擬印表機設定已更新`,failedToUpdate:`更新設定失敗`,copyFailed:`複製失敗 — 請手動選取文字`,accessCodeRequired:`請先設定存取碼`,targetPrinterRequired:`請先選擇目標印表機`,bindIpRequired:`請先設定繫結 IP`,accessCodeEmpty:`存取碼不能為空`,accessCodeLength:`存取碼必須恰好 8 個字元`,targetCodeChangedRebind:`存取碼已同步到新的目標印表機。請在切片軟體中重新加入此裝置以使用新的存取碼。`,created:`虛擬印表機已建立`,failedToCreate:`建立虛擬印表機失敗`,deleted:`虛擬印表機已刪除`,failedToDelete:`刪除虛擬印表機失敗`},list:{title:`虛擬印表機`,add:`新增`,addFirst:`新增虛擬印表機`,empty:`未設定虛擬印表機。新增一個以開始使用。`},bindIp:{title:`繫結介面`,placeholder:`選擇介面...`,hint:`此虛擬印表機繫結的網路介面。每臺印表機必須唯一。`},proxy:{accessCodeHint:`在代理模式下，在切片軟體中使用目標印表機的存取碼。連線會透明轉發到真實印表機。`},addDialog:{title:`新增虛擬印表機`,name:`名稱`,hint:`建立後可以設定存取碼、目標印表機和其他設定。`,create:`建立`},deleteConfirm:{title:`刪除虛擬印表機`,message:`確定要刪除"{{name}}"嗎？這將停止此印表機的所有服務。`}},modelViewer:{openInSlicer:`在切片軟體中開啟`,openInSlicerWith:`用{{slicer}}開啟`,moreSlicerOptions:`更多切片軟體選項`,openInSlicerFailed:`無法在切片軟體中開啟`,tabs:{model:`3D 模型`},notAvailable:`不可用`,plates:`板`,allPlates:`所有板`,plateNumber:`板 {{number}}`,plateCount:`{{count}} 個板`,plateCount_other:`{{count}} 個板`,objectCount:`{{count}} 個物件`,objectCount_other:`{{count}} 個物件`,filamentCount:`{{count}} 種耗材`,filamentCount_other:`{{count}} 種耗材`,eta:`預計 {{minutes}} 分鐘`,noPreview:`此檔案無可用預覽`,pagination:{pageOf:`第 {{current}} / {{total}} 頁`,prev:`上一頁`,next:`下一頁`},errors:{failedToLoad:`載入檔案失敗`,noMeshes:`3MF 檔案中未找到網格`,unsupportedFormat:`不支援的檔案格式`}},maintenanceDescriptions:{lubricateCarbonRods:`在碳纖維杆上塗抹潤滑劑以確保順暢運動`,lubricateRails:`在線性導軌上塗抹潤滑劑以確保順暢運動`,cleanNozzle:`清潔熱端和噴嘴以防止堵塞`,checkBelts:`檢查皮帶張力以確保列印精度`,cleanBuildPlate:`清潔列印板以獲得更好的附著力`,checkExtruder:`檢查擠出機齒輪磨損情況`,checkCooling:`確保冷卻風扇正常工作`,generalInspection:`印表機綜合檢查`,cleanCarbonRods:`清潔碳纖維杆以減少摩擦`,lubricateSteelRods:`在鋼杆上塗抹潤滑劑以確保順暢運動`,cleanSteelRods:`清潔鋼杆以減少摩擦`,cleanLinearRails:`擦拭線性導軌以清除灰塵和碎屑`,checkPtfeTube:`檢查 PTFE 管的磨損或損壞`,replaceHepaFilter:`更換 HEPA 過濾器以保證空氣品質`,replaceCarbonFilter:`更換活性炭過濾器`,lubricateLeftNozzleRail:`潤滑左噴嘴導軌（H2 系列）`},haSensors:{label:`感測器`,unavailable:`無法使用`,blocksPrints:`{{entity}} — 警報期間暫停列印`,states:{open:`開啟`,closed:`關閉`,unlocked:`已解鎖`,locked:`已鎖定`,detected:`已偵測`,clear:`無`,wet:`潮濕`,dry:`乾燥`,problem:`異常`,ok:`正常`,running:`運轉中`,stopped:`已停止`,on:`開`,off:`關`},sectionTitle:`Home Assistant 感測器（印表機）`,add:`新增感測器`,addTitle:`新增 Home Assistant 感測器`,editTitle:`編輯 Home Assistant 感測器`,empty:`還沒有感測器。綁定 Home Assistant 的門磁或溫度計，即可顯示在印表機卡片上。`,unknownPrinter:`未知印表機`,badgeBlocks:`暫停列印`,badgeNotifies:`發送通知`,badgeHidden:`卡片上隱藏`,printer:`印表機`,entity:`實體`,searchPlaceholder:`搜尋實體...`,noEntities:`沒有相符的實體`,name:`顯示名稱`,alertWhen:`警報條件`,alertNever:`永不 — 僅顯示`,alertAbove:`高於`,alertBelow:`低於`,alertHint:`進入警報狀態後會在印表機卡片上醒目顯示，並啟用下方選項。`,showOnCard:`在印表機卡片上顯示`,notifyOnAlert:`觸發警報時發送通知`,blockPrint:`警報期間暫停佇列中的列印`,blockPrintHint:`工作會留在佇列中，感測器恢復後自動開始。Home Assistant 無法連線時會忽略此設定。`,toast:{created:`已新增感測器`,updated:`已儲存感測器`,deleted:`已移除感測器`},error:{pickEntity:`請選擇一個 Home Assistant 實體`,nameRequired:`請輸入顯示名稱`,printerRequired:`請選擇一台印表機`,alertRequired:`請先設定警報條件`}},locationHaSensors:{sectionTitle:`Home Assistant 感測器（存放位置）`,sectionDescription:`將 Home Assistant 的溫度、濕度或電量感測器綁定到存放位置，即可在線材卡片和表格中顯示即時數值。每個存放位置每個類別只能綁定一個感測器。`,add:`新增感測器`,addTitle:`新增 Home Assistant 感測器`,editTitle:`編輯 Home Assistant 感測器`,empty:`還沒有感測器。綁定 Home Assistant 的溫度或濕度感測器，即可顯示在線材卡片上。`,unknownLocation:`未知位置`,location:`存放位置`,showOnCard:`在線材卡片上顯示`,overwriteConfirm:{title:`要取代現有感測器嗎？`,messageTemperature:`"{{location}}" 已綁定溫度感測器：{{name}}。繼續將取代它。`,messageHumidity:`"{{location}}" 已綁定濕度感測器：{{name}}。繼續將取代它。`,messageBattery:`"{{location}}" 已綁定電池感測器：{{name}}。繼續將取代它。`},autoAdd:{confirmTitle:`是否也新增其他感測器？`,confirmMessage:`Bambuddy 也為此位置找到了其他感測器。請選擇要一併新增的感測器。`,added:`已同時新增：{{names}}`,noneFound:`未找到該位置相符的溫度、濕度或電池感測器。`,onlyThisOne:`僅此一個`},options:{buttonLabel:`感測器選項`,title:`位置感測器選項`,description:`當某個位置綁定第一個感測器時，若自動新增溫度、濕度或電池感測器，將使用這些預設值。`,generalSettings:`一般設定`,pollInterval:`更新間隔（秒）`,pollIntervalHint:`Bambuddy 輪詢 Home Assistant 並刷新畫面上感測器數值的頻率。最少 60 秒。`,colorizeValues:`依警示閾值為感測器數值著色`,aboveColor:`超過閾值的顏色`,belowColor:`低於閾值的顏色`,optimalColor:`最佳值顏色`,colors:{red:`紅色`,orange:`橙色`,yellow:`黃色`,green:`綠色`,blue:`藍色`,purple:`紫色`,pink:`粉色`},saved:`選項已儲存`,saveFailed:`儲存選項失敗`,reset:`重設`,resetConfirm:{title:`要重設所有現有位置感測器嗎？`,message:`這將使用上方設定的值覆寫所有現有儲存位置溫度、濕度及電池感測器的警示閾值、通知與卡片顯示設定，並將每個感測器的名稱還原為其在 Home Assistant 中的易記名稱——不會影響印表機感測器。此操作無法復原。依感測器數量不同，這可能需要一些時間。`},resetDone:`已套用至 {{count}} 個位置感測器`,resetFailed:`重設位置感測器失敗`},deleteAllConfirm:{title:`刪除所有感測器？`,message:`這將刪除綁定到"{{location}}"的全部 {{count}} 個感測器。此操作無法復原。`},currentlyBound:`目前綁定：{{entity}}`,error:{locationRequired:`請選擇存放位置`},toast:{created:`已新增感測器`,updated:`已儲存感測器`,deleted:`已移除感測器`}},smartPlugs:{offline:`離線`,admin:`管理`,openPlugAdminPage:`開啟插座管理頁面`,deleteSmartPlug:`刪除智慧插座`,turnOnSmartPlug:`開啟智慧插座`,turnOffSmartPlug:`關閉智慧插座`,turnOn:`開啟`,turnOff:`關閉`,addSmartPlug:{scanningNetwork:`掃描網路中...`,chooseEntity:`選擇實體...`,connectionFailed:`連線失敗`,searchEntities:`搜尋實體...`,searchPowerSensors:`搜尋功率感測器...`,searchEnergySensors:`搜尋能量感測器...`,placeholders:{plugName:`客廳插座`,mqttStateOnValue:`ON、true、1`,mqttSameAsPower:`與功率主題相同，或不同`}},linkedTo:`連結到：`,monitorOnly:`僅監控`,alerts:`警報`,scheduleOn:`開啟 {{time}}`,scheduleOff:`關閉 {{time}}`,on:`開啟`,off:`關閉`,power:`功率`,kwhToday:`今日kWh`,settings:`設定`,automationSettings:`自動化設定`,showInSwitchbar:`在開關欄顯示`,quickAccessSidebar:`從側邊欄快速存取`,enabled:`已啟用`,enableAutomation:`為此插座啟用自動化`,autoOn:`自動開啟`,autoOnDescription:`列印開始時開啟`,autoOff:`自動關閉`,autoOffDescription:`列印完成時關閉（一次性）`,autoOffPersistent:`保持啟用`,autoOffPersistentDescription:`在列印之間保持啟用而非一次性`,controlsPrinterPower:`為印表機供電`,controlsPrinterPowerDescription:`若此插座僅為配件（濾網風扇、燈光）供電，請關閉此選項；否則關閉插座會將印表機標記為離線。`,autoOffAfterDrying:`乾燥完成後自動關閉`,autoOffAfterDryingDescription:`AMS 乾燥完成後關閉`,delayAfterDryingMinutes:`乾燥後延遲（分鐘）`,turnOffDelayMode:`關閉延遲模式`,time:`時間`,temp:`溫度`,delayMinutes:`延遲（分鐘）`,tempThreshold:`溫度閾值（°C）`,tempThresholdDescription:`當噴嘴冷卻到此溫度以下時關閉`,edit:`編輯`,deleteConfirm:`確定要刪除"{{name}}"嗎？此操作無法復原。`,turnOnConfirm:`確定要開啟"{{name}}"嗎？`,turnOffConfirm:`確定要關閉"{{name}}"嗎？這將切斷連線裝置的電源。`,failedToTurn:`無法{{action}}"{{name}}"`,unknown:`未知`,addTitle:`新增智慧插座`,editTitle:`編輯智慧插座`,stopScanning:`停止掃描`,discoverTasmota:`發現Tasmota裝置`,foundDevices:`找到{{count}}個裝置 - 點選選擇：`,noDevicesFound:`未在您的網路中找到Tasmota裝置`,haNotConfigured:`Home Assistant未設定。請在以下位置設定`,haSettingsPath:`設定 → 網路 → Home Assistant`,selectEntity:`選擇實體 *`,ipAddress:`IP 位址 *`,nameLabel:`名稱 *`,username:`使用者名稱`,password:`密碼`,authHint:`如果您的Tasmota裝置不需要認證，請留空`,linkToPrinter:`連結印表機`,noPrinter:`無印表機（僅手動控制）`,linkingDescription:`連結後可在列印開始/完成時自動開關`,powerAlerts:`功率警報`,alertAbove:`高於時警報（W）`,alertBelow:`低於時警報（W）`,alertDescription:`當電力消耗超過這些閾值時收到通知。留空以停用該方向。`,dailySchedule:`每日計畫`,turnOnAt:`開啟時間`,turnOffAt:`關閉時間`,scheduleDescription:`每天在這些時間自動開關插座。留空以跳過該操作。`,showOnPrinterCard:`在印表機卡片上顯示`,displayOnPrinterCard:`在印表機卡片上顯示按鈕`,connectedResult:`已連線！`,deviceLabel:`裝置：{{name}} - `,stateLabel:`狀態：{{state}}`,test:`測試`,delete:`刪除`,save:`儲存`,add:`新增`,cancel:`取消`,failedToStartScan:`無法開始掃描`,nameRequired:`名稱為必填項`,entityRequired:`Home Assistant插座需要實體`,mqttTopicRequired:`必須為功率、能源或狀態監控設定至少一個MQTT主題`,loadingEntities:`正在載入實體...`,loading:`載入中...`,failedToLoadEntities:`載入實體失敗：{{error}}`,noEntitiesMatching:`未找到匹配"{{search}}"的實體`,noEntitiesAvailable:`無可用實體`,searchingEntities:`搜尋所有實體（找到{{count}}個）`,showingEntities:`顯示 switch、light、input_boolean（{{count}}個可用）`,energyMonitoringOptional:`能源監控（可選）`,energyMonitoringHint:`搜尋並選擇提供功率/能源資料的感測器。`,powerSensorW:`功率感測器（W）`,energyTodayKwh:`今日能源（kWh）`,totalEnergyKwh:`總能源（kWh）`,noMatchingSensors:`無匹配的感測器`,none:`無`,mqttNotConfigured:`MQTT代理未設定。請在以下位置設定代理地址`,mqttSettingsPath:`設定 → 網路 → MQTT發布`,mqttNotConfiguredSuffix:`（您不需要啟用發布，只需填寫代理詳細資訊）。`,mqttMonitorOnlyDescription:`MQTT插座透過MQTT訂閱接收功率/能源資料。開關控制不可用 - 請使用您的MQTT代理或家庭自動化系統。`,powerMonitoring:`功率監控`,energyMonitoring:`能源監控`,stateMonitoring:`狀態監控`,optional:`可選`,topic:`主題`,jsonPath:`JSON路徑`,multiplier:`乘數`,onValue:`ON值`,mqttPowerHint:`JSON路徑從JSON負載中提取值（例如"power_l1"）。如果主題發布原始數值，請留空。
 乘數：mW→W使用0.001，kW→W使用1000。`,mqttEnergyHint:`JSON路徑從JSON負載中提取值。原始值請留空。
 乘數：Wh→kWh使用0.001，MWh→kWh使用1000。`,mqttStateHint:`JSON路徑從JSON負載中提取值。原始值請留空。
-ON值：表示"ON"的確切字串。留空以自動檢測（ON、true、1）。`,restControl:`控制`,restOnUrl:`開啟 URL`,restOffUrl:`關閉 URL`,restOnBody:`開啟請求內容`,restOffBody:`關閉請求內容`,restMethod:`HTTP 方法`,restHeaders:`自訂標頭（JSON）`,restStatusUrl:`狀態 URL`,restStatusPath:`狀態 JSON 路徑`,restStatusOnValue:`ON 值`,restPowerUrl:`功率URL`,restPowerPath:`功率 JSON 路徑`,restPowerMultiplier:`功率乘數`,restEnergyUrl:`能耗URL`,restEnergyPath:`能耗 JSON 路徑（今日）`,restEnergyTotalPath:`能耗 JSON 路徑（累計值）`,restEnergyTotalMultiplier:`累計值倍數`,restEnergyTotalPathHint:`例如 aenergy.total`,restEnergyTotalHint:`許多插座（包括所有 Shelly）只提供永不歸零的累計計數值。該值應填在此處，而非上方欄位：若當作今日用量讀取，它在午夜不會歸零，而「昨日」與「總計」會一直是空的。Bambuddy 會據此推算「今日」與「昨日」，這需要一至兩天的取樣資料。Shelly 以瓦時為單位，因此倍數請填 0.001。`,restEnergyMultiplier:`能耗乘數`,restUrlRequired:`REST 插座至少需要一個 URL（ON 或 OFF）`,restHeadersHint:`例如：{"Authorization": "Bearer your-token"}`,restBodyHint:`例如：ON、{"state": "on"}`,restStatusHint:`用於輪詢目前狀態的 URL`,restPathHint:`例如：state 或 data.power.status`,restPowerUrlHint:`功率資料的獨立URL（留空則使用狀態URL）`,restEnergyUrlHint:`能耗資料的獨立URL（留空則使用狀態URL）`,restEnergyHint:`每個值可以使用獨立的URL，或回退到狀態 URL。使用乘數進行單位轉換（例如：0.001 將 Wh 轉換為 kWh）。`,testConnection:`測試連線`,connectionSuccess:`連線成功`,noSwitchesInSwitchbar:`開關欄中沒有開關`,enableSwitchbarHint:`在設定 > 智慧插座中啟用"在開關欄顯示"`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`電子郵件`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`SMTP 電子郵件通知`,telegram:`透過 Telegram 機器人傳送通知`,discord:`透過 Webhook 傳送到 Discord 頻道`,ntfy:`免費、可自託管的推送通知`,pushover:`簡單、可靠的推送通知`,callmebot:`透過 CallMeBot 免費傳送 WhatsApp 通知`,webhook:`通用 HTTP POST 到任意 URL`,homeassistant:`Home Assistant 儀表板中的持久通知`,bark:`透過 Bark 推送 iOS 通知（可自架伺服器）`},lastSuccess:`上次：{{date}}`,error:`錯誤`,printer:`印表機：`,allPrinters:`所有印表機`,sendTestNotification:`傳送測試通知`,eventSettings:`事件設定`,enabled:`已啟用`,sendFromProvider:`從此提供者傳送通知`,printEvents:`列印事件`,printerStatus:`印表機狀態`,amsAlarms:`AMS 警報`,amsHtAlarms:`AMS-HT 警報`,printQueue:`列印佇列`,start:`開始`,plateCheck:`熱床檢測`,complete:`完成`,failed:`失敗`,stopped:`已停止`,progress:`進度`,offline:`離線`,lowFilament:`耗材不足`,maintenance:`維護`,amsHumidity:`AMS 濕度`,amsTemp:`AMS 溫度`,amsDryingSuspended:`乾燥已暫停`,amsHtHumidity:`AMS-HT 濕度`,amsHtTemp:`AMS-HT 溫度`,bedCooled:`熱床已冷卻`,firstLayer:`首層完成`,quiet:`免打擾`,digest:`摘要 {{time}}`,printStarted:`列印已開始`,plateNotEmpty:`熱床非空`,plateNotEmptyDescription:`列印前偵測到物體`,plateClearRequired:`需要確認熱床已清空`,plateClearRequiredDescription:`列印完成，佇列等待熱床確認`,plateClear:`熱床確認`,printCompleted:`列印已完成`,bedCooledLabel:`熱床已冷卻`,bedCooledDescription:`列印後熱床溫度降至閾值以下`,firstLayerCompleteLabel:`首層列印完成`,firstLayerCompleteDescription:`首層完成時傳送帶照片的通知`,missingSpoolAssignmentLabel:`缺少料卷分配`,billingChargeFailedLabel:`計費失敗`,billingChargeFailedDescription:`無法記錄列印費用時通知`,missingSpoolAssignmentDescription:`當列印開始且所需料盤沒有分配料卷時傳送通知`,printFailed:`列印失敗`,printStopped:`列印已停止`,progressMilestones:`進度里程碑`,progressMilestonesDescription:`在 25%、50%、75% 時通知`,printerOffline:`印表機離線`,printerError:`印表機錯誤`,aiFailureDetection:`AI 失敗偵測`,aiFailureDetectionDescription:`當 Obico AI 偵測到可能的列印失敗時通知`,lowFilamentLabel:`耗材不足`,maintenanceDue:`需要維護`,maintenanceDueDescription:`需要維護時通知`,amsHumidityHigh:`AMS 濕度過高`,amsHumidityHighDescription:`普通 AMS 濕度超過閾值`,amsTemperatureHigh:`AMS 溫度過高`,amsTemperatureHighDescription:`普通 AMS 溫度超過閾值`,amsDryingSuspendedTitle:`自動乾燥已暫停`,amsDryingSuspendedDescription:`濕度始終未降到閾值以下，已放棄對某個 AMS 單元的自動乾燥`,amsHtHumidityHigh:`AMS-HT 濕度過高`,amsHtHumidityHighDescription:`AMS-HT 濕度超過閾值`,amsHtTemperatureHigh:`AMS-HT 溫度過高`,amsHtTemperatureHighDescription:`AMS-HT 溫度超過閾值`,inventoryAlerts:`庫存警報`,stockReorderAlert:`補貨警報`,stockReorderAlertDescription:`SKU 已達到補貨點`,stockBreakAlert:`斷貨警報`,stockBreakAlertDescription:`庫存將在補貨到達前耗盡`,jobAdded:`任務已新增`,jobAddedDescription:`任務已新增到佇列`,jobAssigned:`任務已分配`,jobAssignedDescription:`基於模型的任務已分配給印表機`,jobStarted:`任務已開始`,jobStartedDescription:`佇列任務已開始列印`,jobWaiting:`任務等待中`,jobWaitingDescription:`任務正在等待耗材或印表機`,jobSkipped:`任務已跳過`,jobSkippedDescription:`任務已跳過（上一個失敗）`,jobFailed:`任務失敗`,jobFailedDescription:`任務啟動失敗`,queueComplete:`佇列已完成`,queueCompleteDescription:`所有佇列任務已完成`,quietHours:`免打擾時段`,noNotificationsDuring:`在此時段內不傳送通知`,editProviderToChangeQuietHours:`編輯提供者以更改免打擾時段`,dailyDigest:`每日摘要`,batchNotifications:`將通知彙總為每日摘要`,sendAt:`傳送於 {{time}}`,editProviderToChangeDigestTime:`編輯提供者以更改摘要時間`,edit:`編輯`,deleteProvider:`刪除通知提供者`,deleteConfirm:`確定要刪除"{{name}}"嗎？此操作無法復原。`,delete:`刪除`,addTitle:`新增通知提供者`,editTitle:`編輯通知提供者`,nameLabel:`名稱 *`,namePlaceholder:`我的通知`,providerTypeLabel:`提供者類型 *`,configuration:`設定`,testConfiguration:`測試設定`,printerFilter:`印表機篩選`,onlyFromPrinter:`僅傳送來自此印表機的事件通知`,quietHoursDnd:`免打擾時段`,quietStart:`開始`,quietEnd:`結束`,dailyDigestLabel:`每日摘要`,sendDigestAt:`傳送摘要於`,digestCollected:`事件將被收集並在此時間作為單條摘要傳送`,notificationEvents:`通知事件`,progressPercent:`（25%、50%、75%）`,bedCooledAfterPrint:`（列印完成後）`,haSensorAlert:`印表機感測器警報`,haSensorAlertDescription:`（已綁定的 Home Assistant 感測器需要注意）`,locationHaSensorAlert:`存放位置感測器警報`,locationHaSensorAlertDescription:`（綁定至存放位置的 Home Assistant 感測器需要注意）`,eventPriority:{sectionTitle:`ntfy 優先級`,helpNtfy:`為每個已啟用的事件選擇優先級。ntfy 使用它來升級提醒（聲音、可見性、推播行為）。此處未設定的級別將使用 ntfy 伺服器預設值。`,min:`最低`,low:`低`,default:`預設`,high:`高`,urgent:`緊急`},cancel:`取消`,save:`儲存`,add:`新增`,nameRequired:`名稱為必填項`,fieldRequired:`{{field}}為必填項`,haDataInvalid:`Data 欄位必須是有效的 JSON 物件，例如 {"priority": "high", "ttl": 0}`,phoneNumber:`電話號碼`,apiKey:`API 金鑰`,serverUrl:`伺服器 URL`,topic:`主題`,authToken:`認證權杖`,userKey:`使用者金鑰`,appToken:`應用程式權杖`,priority:`優先順序`,pushoverRetry:`緊急重試 (秒)`,pushoverExpire:`緊急逾時 (秒)`,botToken:`機器人權杖`,chatId:`聊天 ID`,telegramThreadId:`論壇主題 ID`,telegramThreadIdHelp:`選填。傳送到論壇群組中的指定主題，即主題連結結尾的數字 (t.me/c/.../25)。留空則傳送到一般主題。`,telegramThreadIdInvalid:`論壇主題 ID 必須是數字。`,smtpServer:`SMTP 伺服器`,smtpPort:`SMTP 連接埠`,security:`安全`,authentication:`認證`,username:`使用者名稱`,password:`密碼`,fromEmail:`寄件人信箱`,toEmail:`收件人信箱`,webhookUrl:`Webhook URL`,payloadFormat:`負載格式`,authorization:`授權`,titleFieldName:`標題欄位名`,messageFieldName:`訊息欄位名`,editTemplate:`編輯範本：{{name}}`,titleLabel:`標題`,bodyLabel:`正文`,titlePlaceholder:`通知標題...`,bodyPlaceholder:`通知正文...`,availableVariables:`可用變數`,clickToInsert:`點選插入到正文游標位置`,livePreview:`即時預覽`,hide:`隱藏`,show:`顯示`,loadingPreview:`載入預覽中...`,enterTemplateContent:`輸入範本內容以檢視預覽`,titlePreview:`標題：`,bodyPreview:`正文：`,resetToDefault:`恢復預設`,titleRequired:`標題為必填項`,bodyRequired:`正文為必填項`,notificationLog:`通知日誌`,showFailedOnly:`僅顯示失敗`,last24Hours:`最近 24 小時`,last7Days:`最近 7 天`,last30Days:`最近 30 天`,last90Days:`最近 90 天`,justNow:`剛剛`,noFailedNotifications:`沒有失敗的通知`,noNotificationsLogged:`沒有通知紀錄`,unknownProvider:`未知提供者`,logTitle:`標題`,logMessage:`訊息`,logError:`錯誤`,logProvider:`提供者：{{type}}`,logTime:`時間：{{time}}`,refresh:`重新整理`,clearOld:`清除舊紀錄`,statsSummary:`最近 {{days}} 天：`,statsNotifications:`條通知`,statsSent:`{{count}} 條已傳送`,statsFailed:`{{count}} 條失敗`,eventTypes:{print_start:`列印已開始`,print_complete:`列印完成`,print_failed:`列印失敗`,print_stopped:`列印已停止`,print_progress:`進度`,printer_offline:`印表機離線`,printer_error:`印表機錯誤`,filament_low:`耗材不足`,maintenance_due:`需要維護`,test:`測試`},userEmail:{title:`通知`,emailNotifications:`郵件通知`,emailNotificationsDesc:`接收您自己列印任務的郵件通知。郵件將透過進階身份驗證中設定的 SMTP 設定傳送。`,sendingTo:`通知將傳送至`,noEmailWarning:`您的帳戶沒有郵件地址。請聯絡管理員新增。`,printJobNotifications:`列印任務通知`,printJobNotificationsDesc:`選擇哪些事件會觸發您提交的列印任務的郵件通知。`,printJobStarts:`列印任務開始`,printJobStartsDesc:`當您的列印任務開始時收到通知。`,printJobFinishes:`列印任務完成`,printJobFinishesDesc:`當您的列印任務成功完成時收到通知。`,printErrors:`列印錯誤`,printErrorsDesc:`當您的列印任務失敗或遇到錯誤時收到通知。`,printJobStops:`列印任務停止`,printJobStopsDesc:`當您的列印任務被取消或停止時收到通知。`,saveSuccess:`通知偏好設定已儲存。`,saveError:`儲存通知偏好設定失敗。`}},richTextEditor:{bold:`粗體`,italic:`斜體`,underline:`底線`,bulletList:`無序列表`,numberedList:`有序列表`,alignLeft:`左對齊`,alignCenter:`居中對齊`,alignRight:`右對齊`,addLink:`新增連結`,removeLink:`移除連結`},externalLinks:{title:`側邊欄連結`,sidebarLayout:`側邊欄`,sidebarLayoutDescription:`顯示或隱藏內建頁面、加入外部連結，並拖曳項目以重新排序側邊欄導覽。`,systemPages:`Bambuddy 頁面`,externalLinks:`外部連結`,visibleInSidebar:`顯示於側邊欄`,hiddenFromSidebar:`隱藏於側邊欄`,requiredInSidebar:`側邊欄中必須顯示`,hidePage:`隱藏頁面`,showPage:`顯示頁面`,settingsCannotBeHidden:`設定無法隱藏`,noLinksConfigured:`未設定外部連結`,deleteLink:`刪除連結`,removeCustomIcon:`移除自訂圖示`,openInNewTab:`在新標籤頁中開啟`,placeholders:{linkName:`我的連結`}},keyboardShortcuts:{title:`鍵盤快捷鍵`,navigation:`導航`,archivesSection:`歸檔`,kProfilesSection:`K 值設定`,generalSection:`通用`,shortcuts:{goToPrinters:`前往印表機`,goToArchives:`前往歸檔`,goToQueue:`前往佇列`,goToStats:`前往統計`,goToProfiles:`前往雲端設定`,goToSettings:`前往設定`,focusSearch:`聚焦搜尋`,openUploadModal:`開啟上傳對話方塊`,clearSelection:`清除選擇 / 取消焦點`,contextMenu:`卡片右鍵選單`,refreshProfiles:`重新整理設定`,newProfile:`新增設定`,exitSelectionMode:`結束選擇模式`,showHelp:`顯示此協助`},footer:`按 Esc 或點選外部關閉`},notificationLog:{title:`通知日誌`,events:{printStarted:`列印開始`,printComplete:`列印完成`,printFailed:`列印失敗`,printStopped:`列印停止`,progress:`進度`,printerOffline:`印表機離線`,printerError:`印表機錯誤`,lowFilament:`耗材不足`,maintenanceDue:`維護到期`,test:`測試`},timeAgo:{justNow:`剛剛`,minutesAgo:`{{minutes}} 分鐘前`,hoursAgo:`{{hours}} 小時前`}},restoreBackup:{title:`恢復備份`,restoring:`恢復中...`,restoreComplete:`恢復完成`,restoreFailed:`恢復失敗`,importSettings:`從備份檔案匯入設定`,pleaseWait:`請稍候，正在恢復您的資料`,clickToSelect:`點選選擇備份檔案（.json 或 .zip）`,howDuplicateHandling:`重複處理方式：`,categories:{printers:`印表機`,smartPlugs:`智慧插座`,notificationProviders:`通知提供者`,filaments:`耗材`,archives:`歸檔`,pendingUploads:`待處理上傳`,settingsTemplates:`設定和範本`},matchingInfo:{printers:`按序列號匹配`,smartPlugs:`按 IP 位址匹配`,notificationProviders:`按名稱匹配`,filaments:`按名稱 + 類型 + 品牌匹配`,archives:`按內容雜湊匹配`,pendingUploads:`按檔名匹配`,settingsTemplates:`始終覆蓋`},replaceExisting:`替換現有資料`,keepExisting:`保留現有資料`,replaceDescription:`用備份資料覆蓋已存在的項目`,keepDescription:`僅恢復不存在的項目`,caution:`注意：`,cautionText:`覆蓋將用備份資料替換您目前的設定。出於安全考慮，印表機存取碼永遠不會被覆蓋。`,itemsRestored:`已恢復項目`,itemsSkipped:`已跳過項目`,restored:`已恢復`,skipped:`已跳過（已存在）`,filesLabel:`檔案（3MF、縮圖等）`,newApiKeysGenerated:`已產生新 API 金鑰`,newApiKeysWarning:`這些金鑰僅顯示一次。請立即複製！`,processingBackup:`處理備份檔案中...`,noDataFound:`備份檔案中未找到可恢復的資料。`,failedToRestore:`恢復備份失敗。請檢查檔案格式。`},backupExport:{title:`匯出備份`,selectData:`選擇要包含的資料`,selectAll:`全選`,selectNone:`全不選`,categoryDescriptions:{settings:`語言、主題、更新偏好`,notifications:`ntfy、Pushover、Discord 等`,templates:`自訂訊息範本`,smartPlugs:`Tasmota 插座設定`,externalLinks:`側邊欄外部服務連結`,printers:`印表機資訊（不含存取碼）`,plateDetection:`空列印板參考影像`,filaments:`耗材類型和成本`,maintenance:`自訂維護計畫`,archives:`所有列印資料 + 檔案（3MF、縮圖、照片）`,projects:`專案、材料清單和附件`,pendingUploads:`虛擬印表機待審核的上傳`,apiKeys:`Webhook API 金鑰（匯入時產生新金鑰）`},requiresPrinters:`需要選擇印表機`,zipFileWarning:`將建立 ZIP 檔案。`,zipFileDescription:`包括所有 3MF 檔案、縮圖、縮時攝影和照片。這可能需要一些時間並產生較大的檔案。`,includeAccessCodes:`包含存取碼`,includeAccessCodesDescription:`用於轉移到另一臺機器`,includeAccessCodesWarning:`存取碼將以明文形式包含。請妥善保管此備份檔案！`,categoriesSelected:`已選擇 {{selectedCount}} 個類別`},pendingUploads:{placeholders:{notes:`新增關於此列印的備註...`},discardUpload:`丟棄上傳`,archiveAllUploads:`歸檔所有上傳`,discardAllUploads:`丟棄所有上傳`,archive:`歸檔`,timeAgo:{justNow:`剛剛`,minutesAgo:`{{minutes}} 分鐘前`,hoursAgo:`{{hours}} 小時前`,daysAgo:`{{days}} 天前`}},apiBrowser:{placeholders:{requestBody:`JSON 請求體...`,searchEndpoints:`搜尋端點...`}},configureAmsSlot:{title:`設定 AMS 槽位`,slotConfigured:`槽位已設定！`,configuringSlot:`正在設定槽位：`,slotLabel:`{{ams}} 槽位 {{slot}}`,searchPresets:`搜尋預設...`,colorPlaceholder:`顏色名稱或十六進位（例如：棕色、FF8800）`,clearCustomColor:`清除自訂顏色`,noCloudPresets:`無雲端預設。登入拓竹雲以同步。`,noPresetsAvailable:`無可用預設。登入拓竹雲或匯入本機設定。`,noMatchingPresets:`未找到匹配的預設。`,custom:`自訂`,builtin:`內建`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`設定已傳送到印表機`,filamentProfile:`耗材設定`,kProfileLabel:`K 值設定（壓力推進）`,filteringFor:`篩選：{{material}}`,noKProfile:`無 K 值設定（使用預設值 0.020）`,noMatchingKProfiles:`未找到匹配的 K 值設定。將使用預設 K=0.020。`,otherKProfiles:`此印表機上的其他 K 值設定`,selectFilamentFirst:`請先選擇耗材設定`,kFromCalibration:`K={{value}}（來自印表機校準）`,customColorLabel:`自訂顏色（可選）`,presetColors:`{{name}} 顏色：`,showLessColors:`顯示更少顏色`,showMoreColors:`顯示更多顏色`,clear:`清除`,hexLabel:`十六進位：#{{hex}}`,resetting:`重設中...`,resetSlot:`重設槽位`,cancel:`取消`,configuring:`設定中...`,configureSlot:`設定槽位`},githubBackup:{title:`Git 備份`,history:`歷史`,downloadBackup:`下載備份`,restoreBackup:`恢復備份`,noBackupsYet:`尚無備份`},emailSettings:{placeholders:{fromName:`Bambuddy`}},tagManagement:{searchTags:`搜尋標籤...`,renameTag:`重新命名標籤`,deleteTag:`刪除標籤`},notificationTemplates:{placeholders:{title:`通知標題...`,body:`通知正文...`}},batchTag:{placeholders:{newTag:`輸入新標籤...`}},photoGallery:{deletePhoto:`刪除照片`},filamentHoverCard:{copySpoolUuid:`複製耗材 UUID`},kProfilesView:{hasNote:`有備註`,copyProfile:`複製設定`},layout:{openMenu:`開啟選單`,noPermissionSystemInfo:`您沒有檢視系統資訊的權限`},dashboard:{dragToReorder:`拖曳以重新排列`,hideWidget:`隱藏小工具`},notificationProviderCard:{deleteNotificationProvider:`刪除通知提供者`},fileManagerModal:{closeFileManager:`關閉檔案管理器`,sortFiles:`排序檔案`,goToParentFolder:`返回上級資料夾`,threeView:`3D 檢視`},embeddedCameraViewer:{refreshStream:`重新整理流`,close:`關閉`,zoomOut:`縮小`,resetZoom:`重設縮放`,zoomIn:`放大`,dragToResize:`拖曳調整大小`},timelapseViewer:{skipBack5s:`後退 5 秒`,skipForward5s:`前進 5 秒`},notificationProviders:{descriptions:{email:`SMTP 郵件通知`,telegram:`透過 Telegram 機器人通知`,discord:`透過 Webhook 傳送到 Discord 頻道`,ntfy:`免費、可自託管的推送通知`,pushover:`簡單、可靠的推送通知`,callmebot:`透過 CallMeBot 的免費 WhatsApp 通知`,webhook:`通用 HTTP POST 到任意 URL`}},logViewer:{searchPlaceholder:`搜尋訊息或日誌名稱...`,noLogEntries:`未找到日誌條目`},switchbarPopover:{noSwitchesInSwitchbar:`切換欄中沒有開關`},projectPageModal:{placeholders:{title:`標題`,designer:`設計師`,license:`許可證`,description:`輸入描述...`,profileTitle:`設定標題`,profileDescription:`設定描述...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`等待中`,justNow:`剛剛`,now:`現在`,minsAgo:`{{count}} 分鐘前`,inMins:`{{count}} 分鐘後`,hoursAgo:`{{count}} 小時前`,inHours:`{{count}} 小時後`,daysAgo:`{{count}} 天前`,inDays:`{{count}} 天後`},spoolbuddy:{nav:{dashboard:`儀表板`,ams:`AMS`,inventory:`庫存`,writeTag:`寫入`,settings:`設定`},status:{nfcReady:`NFC 就緒`,nfcOff:`NFC 關閉`,offline:`離線`,online:`線上`,noPrinters:`無印表機`,deviceOffline:`裝置離線`,waitingConnection:`等待裝置連線...`,systemReady:`系統就緒`,status:`狀態`},dashboard:{readyToScan:`準備掃描`,idleMessage:`將耗材放在磅秤上以識別`,nfcHint:`NFC 標籤將自動讀取`,device:`裝置`,syncWeight:`同步重量`,weightSynced:`已同步！`,unknownTag:`未知標籤`,newTag:`偵測到新標籤`,onScale:`在磅秤上`,linkSpool:`連結到耗材`,linkTagTitle:`將標籤連結到耗材`,linkTag:`連結標籤`,selectSpool:`選擇要連結此標籤的耗材：`,noUntagged:`未找到沒有標籤的耗材`,tagDetected:`偵測到標籤`,noTag:`無標籤`,tagId:`標籤`,grossWeight:`毛重`,spoolSize:`耗材盤尺寸`,close:`關閉`,currentSpool:`目前耗材`,plateReady:`熱床就緒: {{name}}`,plateReadyLabel:`待清理的熱床`,plateClearAction:`清理`,plateClearedToast:`已將熱床標記為已清理`,plateClearFailed:`無法將熱床標記為已清理`},modal:{spoolDetected:`偵測到耗材`,assignToAms:`分配到 AMS`,syncWeight:`同步重量`,weightSynced:`已同步！`,syncing:`同步中...`,newTagDetected:`偵測到新標籤`,addToInventory:`新增到庫存`,assignToAmsTitle:`分配到 AMS`,selectSlot:`選擇槽位`,assign:`分配`,assigning:`分配中...`,assignSuccess:`已分配！`,assignPendingInsert:`已分配。插入耗材後將設定槽位。`,assignError:`分配耗材失敗。請重試。`,noPrinterSelected:`選擇印表機...`,noAmsDetected:`此印表機未偵測到 AMS`,slot:`槽位`},weight:{noReading:`無讀數`,stable:`穩定`,measuring:`測量中...`,tare:`去皮`,calibrate:`校準`},spool:{remaining:`剩餘`,material:`材料`,brand:`品牌`,color:`顏色`,coreWeight:`軸心重`,labelWeight:`標籤重`,scaleWeight:`磅秤重`,netWeight:`淨重`,lastUsed:`上次使用`,unknownColor:`未知顏色`},ams:{noData:`未偵測到 AMS`,connectAms:`連線 AMS 以檢視耗材槽位`,noPrinter:`未選擇印表機`,selectPrinter:`從頂部欄選擇印表機`,printerDisconnected:`印表機已斷開`,humidity:`濕度`,level:`餘量`,active:`活躍`,slot:`槽位`,empty:`空`},inventory:{search:`搜尋耗材...`,empty:`庫存中沒有耗材`,noResults:`沒有匹配的耗材`,spools:`個耗材`,addSpool:`新增耗材`},settings:{tabDevice:`裝置`,tabDisplay:`顯示`,tabScale:`磅秤`,tabUpdates:`更新`,nfcReader:`NFC 讀卡器`,type:`類型`,connection:`連線`,notConnected:`不適用`,deviceInfo:`裝置資訊`,hostname:`主機`,uptime:`執行時間`,systemConfig:`後端與認證`,backendUrl:`Bambuddy 後端 URL`,apiToken:`API 權杖`,apiTokenPlaceholder:`輸入 API 權杖`,saveConfig:`儲存設定`,systemQueued:`設定已加入佇列。`,nfcDiagnostic:`NFC 診斷`,scaleDiagnostic:`磅秤診斷`,readTagDiagnostic:`讀取標籤診斷`,testNfc:`測試讀卡器`,testScale:`測試精度`,testReadTag:`讀取標籤`,systemFieldsRequired:`後端 URL 為必填項。`,brightness:`亮度`,saved:`已儲存`,noBacklight:`未偵測到 DSI 背光。亮度控制需要 DSI 螢幕。`,screenBlank:`螢幕熄滅超時`,screenBlankDesc:`不活動後螢幕關閉。觸控喚醒。`,displayNote:`亮度作為軟體濾鏡套用。`,scaleCalibration:`磅秤校準`,currentWeight:`目前重量`,tareOffset:`去皮`,calFactor:`係數`,knownWeight:`已知重量`,calStep1:`移除磅秤上所有物品並按設定零點。`,calStep2:`將已知重量放在磅秤上。`,setZero:`設定零點`,calibrateNow:`校準`,calibrated:`已校準`,tareSet:`去皮命令已傳送。等待裝置回應...`,tareComplete:`去皮完成！`,tareTimedOut:`去皮逾時 — SpoolBuddy 守護程序是否正在執行？`,tareFailed:`傳送去皮命令失敗`,zeroSet:`零點已設定。將已知重量放在磅秤上。`,calibrationDone:`校準完成！`,calibrationFailed:`校準失敗`,lastCalibrated:`上次校準`,stable:`穩定`,settling:`穩定中...`,firmware:`韌體`,scale:`磅秤`,noDevice:`未找到 SpoolBuddy 裝置`,daemonVersion:`守護程式版本`,currentVersion:`目前`,versionPending:`等待守護程式...`,checking:`檢查中...`,checkUpdates:`檢查更新`,updateAvailable:`有可用更新`,updateInstructions:`透過 SSH 更新：執行 SpoolBuddy 安裝腳本進行升級。`,upToDate:`已是最新`,includeBeta:`包含測試版本`},writeTag:{tabExisting:`現有耗材`,tabNew:`新耗材`,tabReplace:`替換標籤`,searchPlaceholder:`按材料、顏色、品牌搜尋...`,noUntaggedSpools:`沒有無標籤的耗材`,noTaggedSpools:`沒有有標籤的耗材`,selectSpool:`選擇一個耗材，然後將空白 NTAG 放在讀卡器上`,placeTag:`將 NTAG 放在讀卡器上`,tagReady:`偵測到標籤 — 準備寫入`,writeTag:`寫入標籤`,replaceTag:`替換標籤`,writing:`寫入標籤中...`,waiting:`等待 SpoolBuddy...`,writeSuccess:`標籤寫入成功！`,writeFailed:`寫入失敗`,queueFailed:`佇列寫入命令失敗`,tryAgain:`重試`,cancel:`取消`,replaceWarning:`舊標籤將被取消連結。新標籤將替換它。`,deviceOffline:`SpoolBuddy 離線`,material:`材料`,colorName:`顏色名稱`,color:`顏色`,brand:`品牌`,weight:`重量 (g)`,createSpool:`建立耗材`,creating:`建立中...`,spoolCreated:`耗材已建立！準備寫入。`,createFailed:`建立耗材失敗`,incompleteDataWarning:`已使用不完整的Spoolman資料寫入標籤`},quickMenu:{printerPower:`印表機電源`,systemControls:`系統`,restartDaemon:`重新啟動守護程式`,restartBrowser:`重新啟動瀏覽器`,reboot:`重新開機`,shutdown:`關機`,swipeToClose:`向下滑動關閉`,confirmTitle:`確認`,confirmShutdown:`確定要關閉 SpoolBuddy 嗎？您需要實體存取才能重新開啟。`,confirmReboot:`確定要重新開機 SpoolBuddy 嗎？`,confirmRestartDaemon:`重新啟動 SpoolBuddy 守護程式？NFC 和磅秤將暫時不可用。`,confirmRestartBrowser:`重新啟動kiosk瀏覽器？螢幕將短暫變黑。`,confirm:`確認`,confirmPlugOn:`開啟 {{name}}？`,confirmPlugOff:`關閉 {{name}}？`,turnOn:`開啟`,turnOff:`關閉`}},diagnostic:{modalTitle:`連線診斷 — {{name}}`,running:`正在執行診斷...`,runningElapsed:`正在執行診斷... ({{elapsed}}秒)`,waitingForReportHint:`正在等待印表機發佈狀態報告 — 最長可能需要 {{max}} 秒。`,runFailed:`無法執行診斷：{{error}}`,retry:`重新執行`,runButton:`執行診斷`,sectionTitle:`連線診斷`,sectionDescription:`檢查印表機無法連線或無法列印的原因 — 連接埠可達性、LAN 開發者模式、Docker 網路模式與認證資訊。`,noPrinters:`未設定印表機。`,overall:{ok:`未發現問題 — 印表機連線看起來正常。`,warnings:`印表機應該可以運作，但有些項目需要注意。`,problems:`發現了可解釋印表機無法連線或無法列印的問題。`},check:{port_mqtt:{title:`控制連接埠（MQTT 8883）`,pass:`可達 — 印表機正在接受控制連線。`,fail:`連接埠 8883 無法連線。印表機已關機、IP 位址不同，或被防火牆封鎖。請核實印表機 IP，並確保沒有任何東西封鎖連接埠 8883。`},port_ftps:{title:`檔案傳輸連接埠（FTPS 990）`,pass:`可達 — 傳送列印檔案將正常運作。`,warn:`連接埠 990 無法連線。監控可能仍然有效，但向印表機傳送列印工作將失敗。請確保連接埠 990 未被封鎖。`,warn_no_tls:`連接埠 990 已開放，但印表機的檔案服務未能完成 TLS 交握。無法取得列印檔案、封面圖與縮時影片，因此封存會維持空白。請重新啟動印表機 — 解除連接埠封鎖並無幫助。`},external_storage:{title:`將傳送的檔案儲存在外部儲存中（安裝步驟 4）`,pass:`印表機回報此選項已開啟 — 傳送的檔案將儲存在 SD 卡上，封存將包含縮圖和切片機中繼資料。`,fail:`印表機回報此選項已關閉。請啟用「將傳送的檔案儲存在外部儲存中」 — 在較新韌體 (P2S 01.02 / Bambu Studio 2.6+) 中，開關位於印表機的列印設定中；在較舊版本中位於 Bambu Studio / OrcaSlicer 的裝置分頁中。如果未啟用此選項，每次封存的列印都將沒有縮圖也沒有切片機中繼資料。`,skip:`未檢查 — 需要有效的 MQTT 連線。在該設定僅存在於切片機中的較舊切片機上，印表機不會回報此設定，因此即使選項已關閉，此檢查也會通過 — 請手動驗證安裝步驟 4。`,skip_unsupported_model:`此型號有 SD 卡槽，但無法開啟該選項 — 目前 P1 系列韌體不會在 Bambu Studio 中顯示此開關，且印表機沒有螢幕。這裡無需修復；在 Bambu Lab 透過韌體加入支援之前，封存的列印可能缺少縮圖和切片中繼資料。`,fail_no_media:`該選項已開啟，但印表機的插槽中未偵測到記憶卡或隨身碟，傳送的檔案無處存放。插入一個再列印一次 — 在此之前，每一次歸檔的列印都會缺少縮圖與切片中繼資料。`,warn_internal_storage:`該選項已開啟且儲存媒體在位，但上一次列印仍進入了 Bambuddy 無法讀取的印表機內部儲存。在 H2 系列、P2S 與 X2D 上，無論此選項如何設定，Bambu Studio 的「列印」按鈕總是傳送到那裡。列印會帶著名稱與時間歸檔，但沒有縮圖與切片中繼資料。要取得完整歸檔，請從 Bambuddy 啟動列印、改用 OrcaSlicer 切片，或在 Bambu Studio 中用「傳送」選擇「外部儲存」後再啟動列印。`,warn_internal_history:`該選項已開啟，儲存媒體也在，但最近一次列印來自印表機裡既有的檔案 — 從它的螢幕重新列印、從 Handy 啟動，或是先前傳送過的檔案。這個檔案庫位於 Bambuddy 讀不到的內部儲存中，而且任何設定都改變不了，因為那次列印根本沒有傳送過檔案。它仍會帶著名稱與時間歸檔，但沒有縮圖與切片中繼資料。要獲得完整歸檔，請從 Bambuddy 啟動列印，或從切片軟體傳送。`},port_rtsps:{title:`攝影機連接埠（{{protocol}} {{port}}）`,pass:`可達 — 攝影機串流將正常運作。`,warn:`連接埠 {{port}} 無法連線。即時攝影機檢視將無法運作。這不影響列印。`},macos_local_network:{title:`macOS 本地網路權限`,pass:`macOS 已允許 Bambuddy 存取本地網路。`,warn_unsigned:`執行 Bambuddy 的 Python 沒有程式碼簽章，macOS 因此無法將本地網路權限繫結到任何身分，會靜默丟棄所有連往印表機的連線——既沒有錯誤，也不會出現授權提示。請執行會完成簽章的 Bambuddy 更新指令碼 (install/update_macos.sh)，然後重新啟動 Bambuddy。直譯器：{{executable}}`,warn_permission:`若印表機已開機且可透過此位址連線，請開啟 系統設定 > 隱私權與安全性 > 本地網路，確認 Bambuddy 使用的 Python 已啟用。未啟用時 macOS 會靜默丟棄本地連線，而且更新 Python 可能不會保留原有授權。`},network_mode:{title:`容器網路模式`,genericRuntime:`容器`,pass:`正在 {{runtime}} 中以 host 網路執行。`,warn:`Bambuddy 正在 {{runtime}} 中以 bridge 網路執行。印表機探索與虛擬印表機需要 host 網路 — 請使用 host 網路重新建立容器（docker-compose 中為 "network_mode: host"，Podman 中為 "--network=host"）。`,skip:`未在容器中執行 — 不適用。`,skip_unknown:`Bambuddy 正在 {{runtime}} 中執行，但無法判斷其網路模式。如果印表機探索或虛擬印表機無法使用，請使用 host 網路重新建立容器。`,skip_system_container:`Bambuddy 正在 {{runtime}} 系統容器中執行，它像虛擬機器一樣直接位於區域網路中 — 不適用。`},subnet:{title:`網路子網路`,pass:`印表機與 Bambuddy 位於同一子網路。`,warn:`印表機（{{printer_ip}}）與 Bambuddy（{{host_ip}}）位於不同的子網路。除非設定了子網路之間的路由，否則它們可能無法互相連線。`,skip:`無法判定子網路 — 已略過。`},mqtt_auth:{title:`印表機認證資訊`,pass:`印表機已接受連線。`,fail:`印表機可達，但 Bambuddy 未與其建立連線。存取碼或序號很可能有誤 — 每次切換僅區域網路模式或開發者模式時存取碼都會變更，請從印表機螢幕重新複製。正在重新啟動或已達到同時連線數上限的印表機看起來也是這樣。`,fail_auth_rejected:`印表機拒絕了 Bambuddy 的認證資訊。存取碼或序號有誤 — 每次切換僅區域網路模式或開發者模式時存取碼都會變更。請從印表機螢幕重新複製，並儲存到印表機設定中。`,skip:`未檢查 — 無法連線到印表機。`},developer_mode:{title:`LAN 開發者模式`,pass:`開發者模式已啟用。`,fail:`印表機上的開發者模式已關閉。請在印表機的 LAN 設定中啟用它 — 並按 OK 確認。否則列印將無法開始。`,skip:`無法檢查 — 需要與印表機的即時連線。`},printer_publishing:{title:`印表機正在發佈狀態`,pass:`印表機正在發佈狀態更新 — AMS、耗材和 K 配置將正確鏡像到切片軟體。`,fail:`MQTT 代理已接受連線，但印表機未發佈任何狀態報告。這幾乎總是因為序號錯誤或大小寫不一致 — device/<serial>/report 主題區分大小寫。請將印表機設定中的序號與印表機螢幕上的顯示進行核對。`,skip:`無法檢查 — 需要與印表機的即時連線。`}}},systemHealth:{sectionTitle:`系統健康`,sectionDescription:`掃描最近的日誌以找出已知問題，在它們演變成支援工單之前，通常你可以自行解決。`,rescan:`重新掃描`,clean:`在最近 {{times}} 筆日誌中未發現已知問題。`,logUnavailable:`檔案日誌記錄已停用，因此無法掃描日誌。請啟用檔案日誌以使用此檢查。`,learnMore:`如何解決`,fixLabel:`解決方法：`,occurrences:`出現 {{times}} 次 — 最近一次 {{lastSeen}}`,category:{layer8:`你可以自行解決`,environment:`環境`,bug:`請回報此問題`},signature:{"ftp-auth-rejected":{name:`印表機拒絕了存取碼`,cause:`印表機拒絕了檔案傳輸登入。存取碼錯誤，或在切換開發者模式後已變更。`,fix:`從印表機螢幕（區域網路設定）重新複製存取碼，並在 Bambuddy 的印表機設定中更新。`},"ftp-connection-timeout":{name:`檔案傳輸連線逾時`,cause:`Bambuddy 無法連線印表機的檔案傳輸連接埠（FTPS 990）。該連接埠被封鎖，或印表機已關機或位於其他子網路。`,fix:`請確認 Bambuddy 與印表機之間的 990 連接埠未被封鎖，且兩者位於同一網路。`},"ftp-ssl-error":{name:`安全檔案傳輸交握失敗`,cause:`印表機的檔案服務在 990 連接埠上未使用 TLS 回應。其檔案伺服器已卡住，這是印表機端的故障，與防火牆或韌體無關。`,fix:`請重新啟動印表機。在此之前無法取得列印檔案、封面圖和縮時影片；列印本身不受影響。`},"bambu-cloud-captcha":{name:`Bambu Cloud 要求進行 CAPTCHA 驗證`,cause:`Bambu 的防濫用機制正在驗證此網路，因此無法完成 Bambu Cloud 登入。這與公開 IP 位址有關，與你的帳號或此安裝無關。`,fix:`請等待：通常幾小時後會自動解除，反覆登入只會延長時間。在此期間，可使用從瀏覽器工作階段取得的存取權杖登入。`},"mqtt-connection-flapping":{name:`印表機連線反覆中斷`,cause:`控制連線（MQTT 8883）反覆中斷並重新連線——通常是網路訊號弱或連接埠被部分封鎖所致。`,fix:`請檢查印表機附近的 Wi-Fi 訊號，盡量使用有線連線，並確認 8883 連接埠能夠穩定連線。`},"camera-connection-refused":{name:`無法存取攝影機串流`,cause:`無法在 RTSPS 322 連接埠連線即時攝影機。該連接埠被封鎖，或印表機上的攝影機或區域網路即時影像已關閉。`,fix:`請在印表機上啟用攝影機和區域網路即時影像，並確認 322 連接埠未被封鎖。這不會影響列印。`},"database-locked":{name:`資料庫寫入衝突`,cause:`在負載下 SQLite 資料庫出現 "database is locked" 錯誤——同時使用多台印表機時較為常見。`,fix:`請將 Bambuddy 切換到外部 PostgreSQL 資料庫。參見文件中的 PostgreSQL 指南。`}}},vpDiagnostic:{title:`設定檢查 — {{name}}`,runButton:`執行設定檢查`,running:`正在執行設定檢查...`,runFailed:`無法執行設定檢查：{{error}}`,retry:`重新執行`,overall:{ok:`所有檢查均已通過 — 此虛擬印表機已正確設定。`,warnings:`虛擬印表機應該可以運作，但有些方面需要注意。`,problems:`發現的問題可以解釋切片軟體為何無法看到或使用此虛擬印表機。`},check:{enabled:{title:`虛擬印表機已啟用`,fail:`此虛擬印表機已關閉。請將其開啟以使其可被探索。`},running:{title:`服務正在執行`,fail:`虛擬印表機已啟用，但其服務未執行。請檢查 Bambuddy 記錄 — 通常是繫結 IP 衝突或權限錯誤使其停止。`},bind_interface:{title:`繫結網路介面`,fail:`繫結介面未設定，或在此主機上已不存在。請在「繫結介面」下拉選單中選擇一個目前的介面。`},access_code:{title:`已設定存取碼`,fail:`未設定存取碼。必須向切片軟體提供與您在此處設定的相同的 8 位存取碼。`},target_printer:{title:`目標印表機`,fail:`未選擇目標印表機。代理模式需要一台實際的印表機進行轉送。`,warn:`目標印表機目前處於離線狀態 — 重新連線後將恢復轉送。`},port_ftps:{title:`檔案上傳服務（連接埠 {{port}}）`,fail:`繫結 IP 的連接埠 {{port}} 上沒有任何監聽，因此切片軟體無法上傳檔案。通常是此介面上的連接埠衝突所致。`},port_mqtt:{title:`控制服務（連接埠 {{port}}）`,fail:`繫結 IP 的連接埠 {{port}} 上沒有任何監聽，因此切片軟體無法連線或顯示狀態。`},port_bind:{title:`探索服務（連接埠 {{port}}）`,fail:`繫結 IP 的連接埠 {{port}} 上沒有任何監聽，因此切片軟體的探索交握會失敗。`},privileged_ports:{title:`特權連接埠繫結`,fail:`連接埠 {{port}} 低於 1024，而此服務沒有繫結它的權限，這正是上面沒有任何項目在接聽的原因。請在 /etc/systemd/system/bambuddy.service 中加入 AmbientCapabilities=CAP_NET_BIND_SERVICE 並重新啟動，或執行 "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))"。使用 Docker 時請加入 cap_add: [NET_BIND_SERVICE]。`},certificate:{title:`TLS 憑證`,pass:`憑證已就緒。請確保已將 Bambuddy CA 憑證（上方）匯入切片軟體的信任庫。`,fail:`此虛擬印表機的 TLS 憑證遺失。請檢查 Bambuddy 資料目錄是否可寫入。`}}},bugReport:{logHealthSummary:`在你的日誌中發現了已知問題`,logHealthIntro:`最近的日誌與已知問題相符。請查看下方的解決方法——解決它們可能無需提交錯誤報告即可解決你的問題。你仍然可以在下方提交報告。`,title:`報告錯誤`,description:`描述`,descriptionPlaceholder:`出了什麼問題？請描述問題...`,email:`信箱（可選）`,emailPlaceholder:`your@email.com`,emailPrivacy:`如果提供，您的信箱將包含在GitHub Issue的摺疊部分中，以便維護者後續跟進。`,screenshot:`截圖`,uploadOrPaste:`上傳、貼上或拖曳圖片`,dataCollectedSummary:`報告中包含哪些資料？`,dataIncluded:`包含：`,dataIncludedList:`應用程式版本、作業系統、架構、Python版本、資料庫統計（僅計數）、印表機型號、噴嘴數量、韌體版本、連線狀態、整合狀態（Spoolman、MQTT、HA）、非敏感設定、網路介面數量、Docker詳情、依賴版本。`,dataNeverIncluded:`絕不包含：`,dataNeverIncludedList:`印表機名稱、序列號、存取碼、密碼、IP 位址、信箱地址、API金鑰、權杖、Webhook URL、主機名稱或使用者名稱。`,submit:`提交`,startLogging:`開始偵錯日誌`,stepEnableLogging:`偵錯日誌已啟用`,stepReproduce:`請現在重現問題`,stepStopLogging:`停止並提交報告`,stopAndSubmit:`停止並提交`,maxDuration:`{{minutes}} 分鐘後自動停止`,stoppingLogs:`正在收集日誌並提交...`,submitting:`正在提交錯誤報告...`,submittingStepConnection:`正在執行印表機連線檢查`,submittingStepVirtualPrinters:`正在執行虛擬印表機設定檢查`,submittingStepLogScan:`正在掃描最近的日誌以尋找已知問題`,submittingStepSubmit:`正在將報告提交至 GitHub`,submitSuccess:`錯誤報告提交成功！`,submitFailed:`提交錯誤報告失敗`,diagnosticChecking:`正在檢查印表機連線...`,diagnosticHealthy:`連線檢查通過 — 未在您的印表機上發現問題。`,diagnosticSummary:`{{total}} 台印表機中有 {{problems}} 台存在連線問題`,diagnosticIntro:`一台或多台印表機存在連線問題，可能正是您遇到問題的原因。請展開下方的印表機查看解決方法 — 解決它也許無需提交錯誤報告即可解決問題。您仍然可以在下方提交報告。`,thankYou:`謝謝！`,submitted:`您的錯誤報告已提交。`,viewIssue:`檢視 Issue`,closeKeepsRecording:`重現問題時可以關閉此面板——記錄會繼續進行，重新開啟後會回到這一步。`,resumeRecording:`錯誤報告記錄中 — {{elapsed}}。點擊以完成。`,resumeReport:`繼續報告`,unexpectedError:`發生了意外錯誤`},failureDetection:{title:`AI 故障檢測`,description:`透過自託管的 Obico ML API 監控列印,並對偵測到的故障自動採取行動。`,mlUrl:`Obico ML API 地址`,mlUrlHint:`您自託管的 Obico ml_api 容器的基礎 URL(例如 http://192.168.1.10:3333)。`,mlToken:`ML API 權杖（選填）`,mlTokenPlaceholder:`如果伺服器未設定 ML_API_TOKEN，請留空`,mlTokenHint:`必須與您的 Obico ml_api 容器的 ML_API_TOKEN 環境變數一致。如果容器未使用權杖，請留空。`,test:`測試`,testSuccess:`ML API 可存取且正常。`,testSuccessTokenUnknown:`ML API 可存取且正常。無法驗證權杖。`,testFailed:`無法存取 ML API。`,sensitivity:`靈敏度`,sensitivityLow:`低(減少誤報)`,sensitivityMedium:`中(平衡)`,sensitivityHigh:`高(更早檢測,更多誤報)`,sensitivityHint:`調整觸發警告和故障的置信度閾值。`,action:`偵測到故障時的操作`,actionNotify:`僅通知`,actionPause:`暫停列印`,actionPauseOff:`暫停並切斷電源`,pollInterval:`檢查間隔(秒)`,pollIntervalHint:`列印過程中每臺印表機的檢查頻率。最小 5 秒,最大 120 秒。`,externalUrlMissing:`尚未設定外部 URL。`,externalUrlHint:`ML API 透過 URL 擷取攝影機快照。請在一般設定中設定外部 URL，讓 ML API 容器可以連線到 Bambuddy。`,perPrinterTitle:`監控的印表機`,perPrinterHint:`選擇檢測服務要監視哪些印表機。`,monitorAll:`監控所有已連線的印表機`,statusTitle:`狀態`,serviceRunning:`服務執行中`,thresholds:`低 / 高閾值`,activePrinters:`活動列印`,noActivePrints:`目前沒有正在進行的列印。`,historyTitle:`最近檢測`,noHistory:`尚無檢測紀錄。`},makerworld:{title:`MakerWorld`,description:`貼上 MakerWorld 模型連結，即可直接在 Bambuddy 中匯入並列印 —— 無需切換至 Bambu Handy 應用程式。`,pasteUrlHeader:`從 MakerWorld 匯入`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… 或貼上任意 MakerWorld 連結`,resolveButton:`解析`,signInRequiredTitle:`下載需要登入 Bambu Cloud`,signInRequiredBody:`您可以匿名瀏覽模型詳情，但下載 3MF 檔案需要 Bambu Cloud 帳戶。`,signInExpiredTitle:`Bambu Cloud 登入已過期`,signInExpiredBody:`您仍處於 Bambuddy 的登入狀態，但 Bambu Lab 已不再接受已儲存的權杖，因此下載會失敗。請重新登入 Bambu Cloud。`,openCloudSettings:`開啟雲端設定`,untitledModel:`無標題模型`,byCreator:`作者: {{name}}`,downloadsCount:`{{count}} 次下載`,licensePrefix:`授權條款`,alreadyImported:`已在資料庫中`,openOnMakerworld:`在 MakerWorld 中開啟`,alreadyInLibrary:`此模型已在您的資料庫中 —— 可在檔案管理員 → MakerWorld 中找到`,importSuccess:`已匯入 {{filename}} —— 已儲存至檔案管理員 → MakerWorld`,platesHeader:`列印板 ({{count}})`,plateDefaultName:`列印板 {{n}}`,materialCount:`{{count}} 種耗材`,amsRequired:`需要 AMS`,slicedFor:`為 {{printer}} 切片`,alsoCompatible:`還標記為相容：{{printers}}`,importToLibrary:`儲存`,sliceIn:`儲存並在 {{slicer}} 中切片`,disclaimer:`MakerWorld 整合使用由社群記錄的 API 介面。Bambuddy 與 MakerWorld 或 Bambu Lab 無從屬或認可關係。`,lastImportSuccess:`已匯入您的資料庫`,lastImportAlreadyInLibrary:`已存在於您的資料庫中`,viewInLibrary:`在檔案管理員中查看`,openInBambuStudio:`在 Bambu Studio 中開啟`,openInOrcaSlicer:`在 OrcaSlicer 中開啟`,importTo:`匯入至檔案管理員`,recentImportsHeader:`最近匯入`,phaseResolving:`解析中`,phaseDownloading:`下載中`,folderAuto:`MakerWorld (預設)`,importAll:`全部匯入`,importAllProgress:`正在匯入 {{current}}/{{total}}`,openGallery:`開啟圖片庫`,galleryPrev:`上一張`,galleryNext:`下一張`,deleteImport:`從資料庫中移除`,importDeleting:`正在移除…`,importDeleted:`已從資料庫中移除`,confirmDelete:`從資料庫中移除 {{filename}}？本機檔案將被刪除，但可以從 MakerWorld 重新匯入。`,errors:{resolveFailed:`無法解析該 MakerWorld 連結。`,downloadFailed:`下載失敗。請重試。`,deleteFailed:`無法從資料庫中移除檔案。`}},gcodeViewer:{filamentSlot:`耗材 {{n}}`,loading:`正在讀取走刀路徑…`,loadFailed:`無法載入此檔案的 G-code。`,showTravel:`空跑移動`,topLayer:`頂層`,bottomLayer:`底層`,noSource:`未指定要預覽的檔案。`,view:{filament:`耗材`,feature:`類型`,height:`高度`,width:`寬度`},feature:{wall:`牆體`,sparseInfill:`稀疏填充`,solidInfill:`實心填充`,bridge:`橋接 / 懸垂`,support:`支撐`,skirt:`裙邊 / 邊緣`,gapFill:`間隙填充`,ironing:`熨燙`,primeTower:`擦料塔`},back:`返回`,backToArchives:`返回列印歸檔`,backToFiles:`返回檔案管理器`,plates:`板`,plateN:`板 {{n}}`},libraryTrash:{title:`資源回收筒`,headerButton:`資源回收筒`,headerTooltip:`檢視已移至資源回收筒的檔案`,backToFiles:`返回檔案管理員`,subtitleAdmin:`已刪除的檔案會在資源回收筒保留 {{days}} 天，之後自動刪除。此檢視顯示所有使用者的資源回收筒。`,subtitleUser:`已刪除的檔案會在資源回收筒保留 {{days}} 天，之後自動刪除。`,loading:`正在載入資源回收筒…`,loadError:`無法載入資源回收筒。`,empty:`資源回收筒是空的。`,summary:`{{count}} 個檔案 · {{size}}`,emptyTrash:`清空資源回收筒`,restore:`還原`,purgeNow:`立即刪除`,autoPurgeIn:`將於 {{when}} 自動刪除`,days:`天`,retentionLabel:`自動刪除時間`,selectAll:`全選`,selectOne:`選擇 {{filename}}`,selectionCount:`已選擇 {{count}} 項`,bulkRestore:`還原所選`,bulkPurge:`刪除所選`,col:{filename:`檔案`,folder:`資料夾`,size:`大小`,deleted:`移入資源回收筒`,autoPurge:`自動刪除`,owner:`擁有者`,actions:`操作`},confirm:{purgeTitle:`永久刪除？`,purgeBody:`{{filename}} 將從磁碟中刪除，無法還原。`,emptyTitle:`清空資源回收筒？`,emptyBody:`全部 {{count}} 個檔案將從磁碟中刪除。此操作無法復原。`,bulkPurgeTitle:`永久刪除所選檔案？`,bulkPurgeBody:`所選的 {{count}} 個檔案將從磁碟中刪除，無法還原。`,cta:`永久刪除`},toast:{restored:`檔案已還原。`,restoreFailed:`無法還原檔案。`,purged:`檔案已永久刪除。`,purgeFailed:`無法刪除檔案。`,emptied:`已從資源回收筒刪除 {{count}} 個檔案。`,emptyFailed:`無法清空資源回收筒。`,retentionSaved:`自動刪除已設定為 {{days}} 天。`,retentionFailed:`無法儲存保留設定。`,bulkRestored:`已還原 {{count}} 個檔案。`,bulkPurged:`已刪除 {{count}} 個檔案。`}},libraryPurge:{title:`清理舊檔案`,headerButton:`清理舊檔案`,headerTooltip:`批次將舊檔案移至資源回收筒`,description:`早於所選時間的檔案將被移至資源回收筒。外部資料夾會被略過。在自動刪除之前，您可以從資源回收筒還原檔案。`,ageLabel:`移動早於以下天數的檔案`,days:`天`,includeNeverPrinted:`包括從未列印過的檔案`,effectsTitle:`點擊清除時會發生什麼`,effect1:`符合的檔案移至回收筒 — 尚未從磁碟刪除。`,effect2:`在保留期到期之前，您可以隨時從回收筒復原。`,effect3:`保留期滿後，回收筒清理器將它們從磁碟永久刪除。`,effect4:`外部（連結）資料夾中的檔案將被略過 — Bambuddy 從不刪除不屬於自己的位元組。`,previewLoading:`正在檢查符合的檔案數量…`,previewFailed:`無法預覽清理結果。`,previewSummary:`{{count}} 個檔案 · {{size}} 將被移至資源回收筒`,andMore:`…還有 {{count}} 個`,warning:`檔案將被軟刪除——在保留期結束前，您可以從資源回收筒還原它們。`,confirmCta:`將 {{count}} 個移至資源回收筒`,purging:`正在移至資源回收筒…`,toast:{success:`已將 {{count}} 個檔案移至資源回收筒。`,failed:`無法清理檔案。`}},libraryAutoPurge:{enableLabel:`自動清理舊檔案`,enableDescription:`每天執行一次管理員清理。檔案會先進入資源回收筒——不會立即刪除。`,ageLabel:`自動清理早於以下天數的檔案`,ageDescription:`最少 7 天，最多 10 年。使用與手動「清理舊檔案」按鈕相同的時間規則。`,days:`天`,includeNeverPrinted:`包括從未列印過的檔案`,saveFailed:`無法儲存自動清理設定。`},archivePurge:{headerButton:`清除舊條目`,headerTooltip:`批次刪除舊歸檔`,title:`清除舊歸檔`,description:`清除舊的列印歷史。每個歸檔按其最近一次列印完成時間老化 — 重新列印歸檔會重新整理其年齡，因此活躍工作永遠不會被清除。`,ageLabel:`刪除最近未列印的歸檔：`,days:`天`,effectsTitle:`點擊清除時會發生什麼`,effect1:`每個符合的歸檔將從清單中隱藏，其磁碟檔案（3MF、縮圖、縮時攝影、原始 3MF、F3D、照片）也會被刪除。`,effect2:`資料庫中的歸檔記錄會保留，因此 Quick Stats 仍可計入耗材、時間、成本與能耗的貢獻 — 與單筆刪除的預設行為一致。`,effect3:`勾選下方「同時從統計中移除」，可一併清除 Quick Stats 中的貢獻（等同單筆刪除選項）。此操作無法復原。`,effect4:`重新列印歸檔會重新整理其使用計時器，因此仍在使用的歸檔不會被清除。`,purgeStatsLabel:`同時從統計中移除`,purgeStatsHint:`從 Quick Stats（耗材、時間、成本、能耗）中移除符合的歸檔。未勾選時，Quick Stats 會保留所有貢獻，僅檔案從磁碟刪除。`,previewLoading:`檢查符合的歸檔數量…`,previewFailed:`無法預覽清除。`,previewSummary:`將移除 {{count}} 個歸檔 · {{size}}`,andMore:`…還有 {{count}} 個`,warning:`檔案會從磁碟刪除且無法復原。繼續前請下載或收藏您想保留的內容。`,confirmCta:`移除 {{count}} 個歸檔`,purging:`移除中…`,toast:{success:`已移除 {{count}} 個歸檔。`,failed:`無法清除歸檔。`}},archiveAutoPurge:{enableLabel:`自動清除舊歸檔`,enableDescription:`每天一次，將閾值內未列印的歸檔從清單中隱藏，並從磁碟中刪除其檔案。重新列印會重設計時器。`,ageLabel:`自動刪除最近未列印的歸檔：`,ageDescription:`最少 7 天，最多 10 年。基於最近一次列印完成 — 重新列印會重新整理年齡。刪除 3MF、縮圖、縮時攝影、原始 3MF、F3D 與照片。`,days:`天`,purgeStatsLabel:`同時從統計中移除`,purgeStatsDescription:`啟用後，每日清理任務還會將每個被清除的歸檔從 Quick Stats（耗材、時間、成本、能耗）中移除。預設關閉 — Quick Stats 會保留貢獻，僅檔案從磁碟刪除。`,runNow:`立即清除歸檔`,saveFailed:`無法儲存自動清除設定。`},cameraTokens:{scope:{camera_stream:`攝影機串流`,camwall:`攝影機牆`,overlay:`直播疊加層`},title:`攝影機 API 權杖`,navTitle:`攝影機 API 權杖`,description:`長期權杖，用於將攝影機串流嵌入 Home Assistant、Frigate、自助展示螢幕或其他需要穩定網址的工具。權限範圍在建立時選擇，權杖可隨時撤銷。`,loading:`載入中…`,confirmRevoke:{title:`撤銷此權杖？`,body:`使用「{{name}}」的任何裝置將立即失去存取權限。此操作無法復原。`,cancel:`取消`,confirm:`撤銷`},create:{scopeLabel:`權限範圍`,hintCameraStream:`攝影機串流權杖只能取得攝影機串流與快照。適用於 Home Assistant、Frigate 或任何嵌入單一攝影機的情境。`,hintCamWall:`攝影機牆權杖可在無須登入的螢幕上開啟 /camwall，能看到每台印表機的名稱與狀態以及攝影機串流，但看不到檔案名稱、位址或存取碼。`,hintOverlay:`直播疊加層權杖可在無須登入的螢幕上開啟 /overlay/{printerId}——供 OBS 或任何直播使用。它能看到一台印表機的攝影機串流以及即時列印狀態，包括螢幕上顯示的檔案名稱，但看不到位址或存取碼。`,title:`建立新權杖`,nameLabel:`權杖名稱`,namePlaceholder:`例如 Home Assistant`,daysLabel:`到期天數`,submit:`建立`,hint:`最大有效期 365 天。權杖值僅在建立時顯示一次 — 請立即複製。`},created:{camWallUrlTitle:`此螢幕的攝影機牆網址`,camWallUrlHint:`在螢幕上開啟此網址。任何能看到該網址的人都能觀看攝影機牆，請像對待鑰匙一樣對待它——撤銷權杖即可切斷該螢幕的存取。`,overlayUrlTitle:`用於 OBS 的疊加層網址`,overlayUrlHint:`在 OBS 中將其新增為「瀏覽器」來源（Browser Source）。將 /overlay/1 中的數字改為您印表機的編號（可在「印表機」頁面的網址中查看）。任何能看到該網址的人都能觀看直播，請像對待鑰匙一樣對待它——撤銷權杖即可切斷存取。`,title:`權杖已建立 — 立即複製`,warning:`這是此權杖唯一一次可見。關閉此對話框後您將無法再次查看。`,copy:`複製`,dismiss:`我已儲存`},list:{scope:`權限範圍`,myTitle:`我的權杖`,allTitle:`所有使用者（管理員視圖）`,empty:`尚無權杖。`,name:`名稱`,owner:`擁有者`,prefix:`前綴`,created:`建立時間`,expires:`到期時間`,lastUsed:`最近使用`,revoke:`撤銷`,expired:`已過期`},toast:{created:`權杖已建立`,createFailed:`建立權杖失敗`,revoked:`權杖已撤銷`,revokeFailed:`撤銷權杖失敗`,loadFailed:`載入權杖失敗`,copied:`已複製到剪貼簿`,copyFailed:`複製失敗 — 手動選擇並複製`}},forecast:{title:`庫存預測`,noSpools:`未找到活躍的料卷。請將料卷新增至庫存以查看預測資料。`,noUsageData:`無可用使用資料 — 無法預測庫存時間線。`,sku:`SKU`,material:`材料`,stock:`庫存`,dailyRate:`消耗率`,daysLeft:`剩餘天數`,emptyBy:`耗盡日期`,reorderBy:`補貨截止日`,actions:`操作`,trend:`趨勢`,estimated:`估算`,noData:`無資料`,timeframe:`時間範圍`,chartTitle:`庫存預測 — 前5種材料`,dashedLinesROP:`虛線 = 再訂貨點`,stockLevel:`庫存量`,reorderPoint:`再訂購點`,safetyMargin:`安全餘量`,trendLegend:`趨勢（基於歷史，95%服務水準）`,estimatedLegend:`估算（重量差值）`,noDataLegend:`無資料`,ropLabel:`再訂貨點`,ssLabel:`安全庫存`,safetyStockLegend:`安全庫存`,stockArrivalLegend:`到貨`,stockoutLegend:`斷貨`,alertCount_one:`{{count}}條警告`,alertCount_other:`{{count}}條警告`,order:`訂購`,globalLeadTime:`全域交貨期`,globalLeadTimeHint:`全域交貨期下限 — 用於所有 SKU 的再訂購點計算`,save:`儲存`,cancel:`取消`,settingsSaved:`設定已儲存`,failedSaveSettings:`儲存設定失敗`,globalLeadTimeSaved:`全域提前期已儲存`,skuLeadTimeOverride:`SKU 交貨期覆蓋`,skuLeadTimeHint:`0 = 使用全域交貨期。設定 >0 以覆蓋此 SKU。`,safetyMarginLabel:`安全餘量`,effectiveLeadTime:`有效交貨期`,effectiveLeadTimeHint:`max(全域 {{global}}天, SKU {{sku}}天)`,reorderPointHint:`d̄ × LT + safety margin — 當庫存降至此水準時下單`,safetyMarginHint:`統計安全庫存 (z=1.65 × σ × √LT) + 使用者自訂緩衝`,safetyMarginHintDays:`在統計安全庫存基礎上額外增加的緩衝。{{approx}}`,safetyMarginHintDaysApprox:` ≈ 按當前速率 {{g}}g。`,safetyMarginHintG:`在統計安全庫存基礎上增加的固定重量緩衝。{{approx}}`,safetyMarginHintGApprox:` ≈ 按當前速率 {{days}}天。`,individualSpools:`單個料卷`,labelWeight:`標示重量`,spoolCount_one:`{{count}}個線軸`,spoolCount_other:`{{count}}個線軸`,stockBreakRisk:`斷貨風險`,stockBreakBefore:`補貨前庫存斷檔`,stockBreakDetail:`剩餘 {{days}} 天，交貨期 {{lt}} 天。`,reorderNow:`立即補貨`,reorderTriggerPassed:`觸發日期 {{date}} 已過。`,shoppingList:`購物清單`,shoppingListItems_one:`（{{count}}項）`,shoppingListItems_other:`（{{count}}項）`,shoppingListEmpty:`購物清單為空。點擊任意列的購物車圖示以新增商品。`,addToCart:`新增至購物清單`,alertsSnoozed:`靜音此SKU的提醒`,alertsEnabled:`啟用此SKU的提醒`,addedToCart:`已新增至購物清單`,failedAddItem:`新增項目失敗`,listView:`列表`,logisticsView:`物流`,qty:`數量`,weight:`重量`,leadTime:`交貨期`,expectedRestock:`預計補貨日期`,status:`狀態`,note:`備註`,pending:`待處理`,purchased:`已購買`,received:`已收貨`,markPurchased:`標記為已購買`,markReceived:`標記為已收貨 — 將料卷新增至庫存`,resetToPending:`重置為待處理`,remove:`移除`,clearAll:`清空`,downloadCsv:`CSV`,addToCartTitle:`新增至購物清單`,byQuantity:`依數量`,byDuration:`依時長`,numberOfSpools:`線軸數量`,lastHowManyDays:`需要持續多少天？`,noUsageQty:`無使用資料 — 數量已設為1。`,noteOptional:`備註（選填）`,notePlaceholder:`例如：用於專案X，緊急…`,addNSpools_one:`新增{{count}}個線軸`,addNSpools_other:`新增{{count}}個線軸`,onArrival:`到貨時`,stockBreakIn:`{{days}} 天後斷貨。`,stockRunsOutBefore:`庫存在 {{lt}} 天交貨期結束前耗盡。`,atRate:`按 {{rate}}g/天的速度，您需要`,moreSpools_one:`再{{count}}個線軸`,moreSpools_other:`再{{count}}個線軸`,bridgeGap:`來彌補缺口。`,noReadAccess:`您沒有查看庫存預測的權限。`,noWriteAccess:`您沒有修改預測設定的權限。`}}},sv:{translation:{nav:{printers:`Skrivare`,archives:`Arkiv`,queue:`Utskriftskö`,stats:`Statistik`,profiles:`Profiler`,maintenance:`Underhåll`,projects:`Projekt`,finance:`Finanser`,inventory:`Filament`,files:`Filhanterare`,makerworld:`MakerWorld`,notifications:`Notiser`,settings:`Inställningar`,system:`System`,collapseSidebar:`Minimera sidofältet`,expandSidebar:`Maximera sidofältet`,update:`Uppdatera`,updateAvailable:`Uppdatering tillgänglig: v{{version}}`,updateAvailableBanner:`Version {{version}} är tillgänglig!`,viewUpdate:`Visa uppdatering`,viewOnGithub:`Visa på GitHub`,keyboardShortcuts:`Tangentbordsgenvägar (?)`,switchToLight:`Växla till ljust läge`,switchToDark:`Växla till mörkt läge`,switchToSystem:`Växla till systemläge`,smartSwitches:`Smarta strömbrytare`,logout:`Logga ut`,installApp:`Installera app`,installAppSuccess:`Bambuddy installerades`},common:{plusNMore:`+{{count}} till`,save:`Spara`,saving:`Sparar...`,cancel:`Avbryt`,delete:`Ta bort`,edit:`Redigera`,add:`Lägg till`,close:`Stäng`,confirm:`Bekräfta`,loading:`Laddar...`,error:`Fel`,errorLoading:`Fel vid inläsning av data`,retry:`Försök igen`,success:`Lyckades`,warning:`Varning`,enabled:`Aktiverad`,disabled:`Inaktiverad`,yes:`Ja`,no:`Nej`,on:`På`,off:`Av`,all:`Alla`,none:`Inga`,search:`Sök`,filter:`Filtrera`,sort:`Sortera`,refresh:`Uppdatera`,download:`Ladda ner`,upload:`Ladda upp`,uploading:`Laddar upp...`,uploadFailed:`Uppladdning misslyckades`,actions:`Åtgärder`,status:`Status`,name:`Namn`,user:`Användare`,description:`Beskrivning`,date:`Datum`,time:`Tid`,hours:`timmar`,minutes:`minuter`,seconds:`sekunder`,days:`dagar`,enable:`Aktivera`,disable:`Inaktivera`,permissions:`Behörigheter`,noPrinters:`Inga skrivare konfigurerade`,noData:`Ingen data tillgänglig`,linkNotFound:`Länk hittades ej`,required:`Obligatorisk`,optional:`Valfri`,dismiss:`Avfärda`,apply:`Tillämpa`,reset:`Återställ`,export:`Exportera`,import:`Importera`,clear:`Rensa`,selectAll:`Markera alla`,deselectAll:`Avmarkera alla`,noChange:`— Ingen ändring —`,unchanged:`Oförändrad`,unassigned:`Otilldelad`,unknown:`Okänd`,unknownError:`Okänt fel`,today:`Idag`,tomorrow:`Imorgon`,asap:`Så snart som möjligt`,overdue:`Försenad`,now:`Nu`,collapse:`Minimera`,expand:`Maximera`,previous:`Föregående`,next:`Nästa`,viewArchive:`Visa arkiv`,viewInFileManager:`Visa i filhanterare`,addedBy:`Tillagd av {{username}}`,prints:`utskrifter`,more:`+{{count}} till`,ascending:`Stigande`,descending:`Sjunkande`,back:`Tillbaka`,copy:`Kopiera`,copied:`Kopierad!`,printer:`Skrivare`,remove:`Ta bort`,type:`Typ`,print:`Skriv ut`,rename:`Döp om`,move:`Flytta`,create:`Skapa`,duplicate:`Duplicera`,left:`Vänster`,right:`Höger`,run:`Kör`,running:`Kör...`},finance:{allTypes:`Alla typer`,allCostCenters:`Alla kostnadsställen`,title:`Finanser`,subtitle:`Plånbok, personliga transaktioner och kostnadsställen`,noAccess:`Du har inte behörighet att visa finansiella data.`,personalView:`Personlig vy`,adminView:`Adminvy`,createCostCenter:`Skapa kostnadsställe`,adjustWallet:`Justera plånbok`,addManualPrint:`Lägg till manuell utskrift`,manageMembers:`Hantera medlemmar i kostnadsställe`,currentBalance:`Aktuellt saldo`,transactions:`Transaktioner`,personalTransactions:`Personliga transaktioner`,costCenters:`Kostnadsställen`,availableForPrinting:`Tillgängligt för utskrifter`,costCenterName:`Namn`,budgetType:`Budgettyp`,monthlyBudget:`Månadsbudget`,totalBudget:`Total budget`,noBudget:`Ingen budget`,create:`Skapa`,selectUser:`Välj användare`,transactionType:`Typ`,amount:`Belopp`,noCostCenter:`Inget kostnadsställe`,descriptionOptional:`Beskrivning (valfritt)`,applyAdjustment:`Tillämpa justering`,memberCanPrint:`Medlem kan skriva ut`,addMember:`Lägg till medlem`,canPrint:`Kan skriva ut`,noMembers:`Inga medlemmar tilldelade.`,editCostCenter:`Redigera kostnadsställe`,myCostCenters:`Mina kostnadsställen`,costCentersHint:`Granska budgetgränser och håll kostnaderna under kontroll`,noCostCenters:`Inga kostnadsställen hittade.`,owner:`Ägare`,balance:`Kontosaldo`,unlimited:`Obegränsad`,budgetPolicyHint:`Kontosaldon håller reda på kostnader. Utskrift är begränsat endast av det valda kostnadsställets budget; utan budget är utskriften obgränsad.`,budget:`Budget`,shared:`Delad`,cannotEditPrivateCostCenter:`Privat kostnadsställe kan inte redigeras här`,recentTransactions:`Senaste transaktioner`,transactionsHint:`Filtrera efter typ och kostnadsställe`,first:`Första`,prev:`Föregående`,next:`Nästa`,last:`Sista`,pageNumberOf:`Sida {{page}} av {{total}}`,noTransactions:`Inga transaktioner tillgängliga.`,noTransactionsForFilter:`Inga transaktioner matchar de valda filtren.`,costCenter:`Kostnadsställe`,balanceAfter:`Saldo efter`,userWithId:`Användare #{{id}}`,partial:`Delvis`,editTransaction:`Redigera transaktion`,selectCostCenter:`Välj kostnadsställe...`,costCenterRequired:`Vänligen välj ett kostnadsställe`,amountExample:`t.ex., 4,00`,manualAdjustmentExample:`t.ex., manuell justering`,userRequired:`Välj en användare`,amountInvalid:`Beloppet måste vara ett giltigt nummer`,createdCostCenter:`Kostnadsställe skapat`,createCostCenterFailed:`Kunde inte skapa kostnadsställe`,transactionDeleted:`Transaktion borttagen`,deleteTransactionFailed:`Kunde inte ta bort transaktion`,transactionEdited:`Transaktion uppdaterad och bokföring omberäknad`,editTransactionFailed:`Kunde inte redigera transaktion`,manualPrintCreated:`Manuell utskriftsavgift tillagd och bokföring omberäknad`,manualPrintFailed:`Kunde inte skapa manuell utskrift`,memberSaved:`Medlem sparad`,memberSaveFailed:`Kunde inte spara medlem`,memberRemoved:`Medlem borttagen`,memberRemoveFailed:`Kunde inte ta bort medlem`,costCenterNameRequired:`Namn på kostnadsställe krävs`,costCenterUpdated:`Kostnadsställe uppdaterat`,costCenterUpdateFailed:`Kunde inte uppdatera kostnadsställe`,confirmDeleteCostCenter:`Ta bort kostnadsställe "{{name}}"?`,costCenterDeleted:`Kostnadsställe borttaget`,costCenterDeleteFailed:`Kunde inte ta bort kostnadsställe`,deleteTransactionConfirm:`Ta bort denna transaktion? Saldon kommer att omberäknas automatiskt.`,deposit:`Insättning`,withdraw:`Uttag`,printCharge:`Utskriftsavgift`,deleteTransaction:`Ta bort transaktion`},printers:{title:`Skrivare`,addPrinter:`Lägg till skrivare`,addPreflight:{checking:`Kontrollerar anslutning...`,warning:`Vissa anslutningskontroller misslyckades. Denna skrivare kan visas som offline. Granska kontrollerna nedan, åtgärda vad du kan, eller spara ändå.`,back:`Tillbaka`,saveAnyway:`Spara ändå`},editPrinter:`Redigera skrivare`,deletePrinter:`Ta bort skrivare`,printerName:`Skrivarnamn`,serialNumber:`Serienummer`,ipAddress:`IP-adress / värdnamn`,accessCode:`Åtkomstkod`,model:`Modell`,nozzleCount:`Antal munstycken`,autoArchive:`Autoarkivera`,status:{available:`Tillgänglig`,idle:`Inaktiv`,printing:`Skriver ut`,paused:`Pausad`,offline:`Offline`,problem:`Problem`,error:`Fel`,finished:`Färdig`,unknown:`Okänd`},temperatures:{nozzle:`Munstycke`,bed:`Byggplatta`,chamber:`Kammare`},heaterHistory:{title:`Värmehistorik`,openLabel:`Visa värmehistorik`,nozzle:`Munstycke`,nozzle2:`Munstycke 2`,bed:`Byggplatta`,chamber:`Kammare`,error:`Kunde inte ladda historik`,empty:`Ingen data inspelad än`},progress:`{{percent}}% klar`,timeRemaining:`{{time}} kvar`,deleteConfirm:`Är du säker på att du vill ta bort "{{name}}"?`,maintenanceOk:`Underhåll OK`,maintenanceWarning:`{{count}} varning`,maintenanceWarning_plural:`{{count}} varningar`,maintenanceDue:`{{count}} utebliven`,maintenanceDue_plural:`{{count}} uteblivna`,sort:{name:`Namn`,status:`Status`,model:`Modell`,location:`Plats`,eta:`Beräknad tid`,ascending:`Sortera stigande`,descending:`Sortera fallande`},cardSize:{small:`Små kort`,medium:`Mellanstora kort`,large:`Stora kort`,extraLarge:`Extra stora kort`},pageView:{openCamWallPage:`Öppna kameravägg som sida`,cards:`Kort`,camWall:`Kameravägg`},camWall:{page:{tokenRejected:`Denna länk till kameraväggen är inte längre giltig. Token kan ha löpt ut eller återkallats.`,loadFailed:`Kunde inte ladda skrivarna.`},noPrinters:`Inga skrivare att visa`,noSignal:`Ingen signal`,live:`Live`,snap:`Ögonblicksbild`,off:`Av`,summary:`{{live}} live, {{snap}} ögonblicksbilder, {{total}} totalt`,layer:`Skikt {{cur}}/{{total}}`,timeLeft:`{{time}} kvar`,statusMode:{off:`Av`,compact:`Kompakt`,full:`Fullständig`},settings:{title:`Inställningar för kameravägg`,maxLive:`Max antal live-sändningar`,maxLiveHint:`Hur många rutor som sänds live samtidigt. Övriga uppdateras som ögonblicksbilder.`,snapshotInterval:`Intervall för ögonblicksbilder (sekunder)`,snapshotIntervalHint:`Hur ofta icke-live-rutor hämtar en ny ögonblicksbild.`,statusOverlay:`Statusöverlägg`,statusOverlayHint:`Kompakt: Endast statusmärke. Fullständig: + framsteg, skikt, tid kvar.`}},hideOffline:`Dölj offline`,nextAvailable:`Nästa tillgängliga`,powerOn:`Sätt på`,offlinePrintersWithPlugs:`Offline-skrivare med smarta kontakter`,noPrintersConfigured:`Inga skrivare konfigurerade än`,search:`Sök skrivare...`,noSearchResults:`Inga skrivare matchar din sökning eller filter`,filter:{allStatuses:`Alla statusar`,allLocations:`Alla platser`},toolbar:{filters:`Filter`,view:`Vy`,actions:`Åtgärder`},readyToPrint:`Redo att skriva ut`,external:`Extern`,extL:`Ext-V`,extR:`Ext-H`,deleteArchives:`Ta bort utskriftsarkiv`,noLabel:`Ingen etikett`,printPreview:`Förhandsgranskning av utskrift`,width:`Bredd`,height:`Höjd`,noObjectsFound:`Inga objekt hittade`,objectsLoadedOnPrintStart:`Objekt laddas när en utskrift startar`,willBeSkipped:`Kommer att hoppas över`,name:`Namn`,serialCannotBeChanged:`Serienummer kan inte ändras`,locationHelp:`Används för att gruppera skrivare och filtrera köuppgifter`,wifiSignal:{veryWeak:`Mycket svag`,weak:`Svag`,fair:`Medel`,good:`Bra`,excellent:`Utmärkt`},maintenanceUpToDate:`Allt underhåll är uppdaterat - Klicka för att se`,maintenance:{title:`I underhållsläge`,subtitle:`Denna skrivare är pausad — ej ansluten, ej berättigad för kö, skickar inga notiser.`,pillLabel:`Underhåll`,exitButton:`Avsluta underhåll`,menuEnter:`Aktivera underhållsläge`,menuExit:`Avsluta underhållsläge`,toastEntered:`{{name}} är nu i underhållsläge`,toastExited:`{{name}} är tillbaka online`,confirmMidPrintTitle:`Aktivera underhållsläge under utskrift?`,confirmMidPrintMessage:`{{name}} skriver för närvarande ut. Om du aktiverar underhållsläge kommer MQTT att kopplas från och framstegsspårning samt färdighetsnotiser för detta jobb kommer att stoppas. Fortsätta?`,editFieldLabel:`Underhållsläge`,editFieldHelp:`När det är på, är denna skrivare pausad från MQTT, köutskick och notiser — användbart för reparation, parallella Bambuddy-installationer eller tillfällig paus.`},chamberLightOn:`Sätt på kammarljus`,chamberLightOff:`Stäng av kammarljus`,files:`Filer`,browseFiles:`Bläddra bland skrivarens filer`,autoOffAfterPrint:`Automatisk avstängning efter utskrift`,autoOffExecuted:`Auto-avstängning utfördes – sätt på skrivaren för att återställa`,hmsErrors:`HMS-fel`,viewHmsErrors:`Visa {{count}} HMS-fel`,resume:`Fortsätt`,pause:`Pausa`,stop:`Stoppa`,camera:`Kamera`,skipObject:`Hoppa över objekt`,reconnect:`Återanslut`,forceRefresh:`Tvinga uppdatering`,forceRefreshSuccess:`Uppdatering begärd`,mqttDebug:`MQTT-felsökning`,printerInformation:`Skrivarinformation`,copyToClipboard:`Kopiera`,copied:`Kopierad!`,state:`Status`,wifiSignalLabel:`WiFi-signal`,developerMode:`Utvecklarläge`,enabled:`Aktiverad`,disabled:`Inaktiverad`,addedOn:`Tillagd`,sdCard:`SD-kort`,inserted:`Insatt`,notInserted:`Ej insatt`,totalPrintHours:`Utskriftstimmar`,activeNozzle:`Aktiv: {{nozzle}} munstycke`,amsSwitchInletTooltip:`Filamentspårväxlare IN-{{inlet}} ({{side}}) — matar båda munstyckena`,nozzleRack:`Munstyckesställ`,nozzleDocked:`Parkerad`,nozzleMounted:`Monterad`,nozzleActive:`Aktiv`,nozzleIdle:`Inaktiv`,nozzleDiameter:`Diameter`,nozzleType:`Typ`,nozzleStatus:`Status`,nozzleFilament:`Filament`,nozzleWear:`Slitage`,nozzleMaxTemp:`Max temp`,nozzleSerial:`Serienummer`,nozzleHardenedSteel:`Härdat stål`,nozzleStainlessSteel:`Rostfritt stål`,nozzleTungstenCarbide:`Volframkarbid`,nozzleFlow:`Flöde`,nozzleHighFlow:`Högt flöde`,nozzleStandardFlow:`Standard`,firmwareUpdate:`Firmwareuppdatering`,firmwareInstructions:`På skrivarens pekskärm, gå till`,firmwareNav:`Navigera till`,settings:`Inställningar`,firmware:`Firmware`,discoverPrinters:`Hitta skrivare`,searching:`Söker...`,manualEntry:`Manuell inmatning`,addFromCloud:`Lägg till från molnet`,toast:{printerDeleted:`Skrivare borttagen`,missingSpoolAssignment:`Utskrift startade på {{printer}}. Saknas spool-tilldelning för: {{slots}}`,killSwitchTriggered:`Fjärrlås för fakturering stoppade en obehörig utskrift på {{printer}}: {{filename}}`,billingChargeFailed:`Fakturering misslyckades för {{filename}} på {{printer}}. Budgetreservationen bibehölls; kontrollera serverloggarna.`,assignmentVerified:`Filament laddat i fack {{slot}} ({{printer}})`,assignmentVerifiedNoKprofile:`Fack {{slot}} på {{printer}} laddat, men flödeskalibrering (K-profil) tillämpades inte`,assignmentNotConfirmed:`Kunde inte bekräfta tilldelningen för fack {{slot}} på {{printer}} — kontrollera AMS-facket`,printerAdded:`Skrivare tillagd`,printerUpdated:`Skrivare uppdaterad`,failedToDelete:`Kunde inte ta bort skrivare`,failedToAdd:`Kunde inte lägga till skrivare`,connectionFailedNotAdded:`Kunde inte ansluta till skrivaren. Verifiera IP, serienummer och åtkomstkod, och bekräfta att LAN-läge är aktiverat. Skrivaren lades inte till.`,failedToUpdate:`Kunde inte uppdatera skrivare`,commandSent:`Kommando skickat`,failedToSendCommand:`Kunde inte skicka kommando`,turnedOn:`{{name}} slogs på`,failedToPowerOn:`Kunde inte sätta på {{name}}`,scriptTriggered:`Skript utlöst`,printStopped:`Utskrift stoppad`,printPaused:`Utskrift pausad`,printResumed:`Utskrift återupptagen`,referenceDeleted:`Referens borttagen`,detectionAreaSaved:`Detekteringsområde sparat`,failedToRunScript:`Kunde inte köra skript`,failedToStopPrint:`Kunde inte stoppa utskrift`,failedToPausePrint:`Kunde inte pausa utskrift`,failedToResumePrint:`Kunde inte återuppta utskrift`,failedToControlChamberLight:`Kunde inte kontrollera kammarljus`,failedToSetSpeed:`Kunde inte ställa in utskriftshastighet`,failedToUpdateSetting:`Kunde inte uppdatera inställning`,failedToSkipObjects:`Kunde inte hoppa över objekt`,failedToRereadRfid:`Kunde inte läsa om RFID`,failedToCheckPlate:`Kunde inte kontrollera platta`,failedToUpdateLabel:`Kunde inte uppdatera etikett`,failedToDeleteReference:`Kunde inte ta bort referens`,failedToSaveDetectionArea:`Kunde inte spara detekteringsområde`,plateCheckEnabled:`Plattkontroll aktiverad`,plateCheckDisabled:`Plattkontroll inaktiverad`,calibrationSaved:`Kalibrering sparad!`,calibrationFailed:`Kalibrering misslyckades`,rfidRereadInitiated:`Omstart av RFID-läsning påbörjad`,loadInitiated:`Laddar filament…`,unloadInitiated:`Laddar ur filament…`,failedToLoad:`Kunde inte ladda filament`,failedToUnload:`Kunde inte ladda ur filament`},connection:{connected:`Ansluten`,offline:`Offline`},plateStatus:{markCleared:`Markera platta som tömd`,cleared:`Platta tömd`,notCleared:`Platta ej tömd`,inUse:`Platta i användning`},queue:{inQueue:`{{count}} utskrift i kö`,inQueue_plural:`{{count}} utskrifter i kö`},controls:`Kontroller`,rfid:{reread:`Läs om RFID`},ams:{load:`Ladda`,unload:`Ladda ur`,feedTitle:`Ladda {{slot}} till vilket munstycke?`,feedPrompt:`Filamentspårväxlaren kan dirigera detta fack till endera värmeblock. Välj vilken du vill mata.`,feedLeft:`Vänster munstycke`,feedRight:`Höger munstycke`,feedAlreadyLoaded:`Redan laddad`,switchNotReady:`Filamentspårväxlaren är inte konfigurerad ännu. Tilldela varje AMS till ett inlopp på skrivaren och försök sedan igen.`},bedJog:{limitWarning:`Rörlighetsgränser tillämpas inte under manuella förflyttningar — en Bambu-firmware-bugg ignorerar mjukvarustoppar för fjärrkommandon. Flytta försiktigt för att undvika kollision.`,title:`Manuella kontroller`,bed:`Byggplatta`,step:`Steg (mm)`,up:`Flytta upp platta`,down:`Flytta ner platta`,toolheadUp:`Flytta upp extruderhuvud`,toolheadDown:`Flytta ner extruderhuvud`,disabledWhilePrinting:`Inaktiverad under utskrift`,notHomedTitle:`Skrivaren är inte riktad`,notHomedMessage:`Skrivaren har inte riktats sedan senaste utskriften. Kör auto-riktning för säker positionering (parkerar verktygshuvudet, riktar sedan X, Y och Z), eller flytta ändå — mjukvarustoppar kommer att ignoreras.`,homeZ:`Auto-riktning`,moveAnyway:`Flytta ändå`,homingStarted:`Auto-riktning pågår…`},permission:{noAdd:`Du har inte behörighet att lägga till skrivare`,noEdit:`Du har inte behörighet att redigera skrivare`,noDelete:`Du har inte behörighet att ta bort skrivare`,noControl:`Du har inte behörighet att kontrollera skrivare`,noFiles:`Du har inte behörighet att komma åt skrivarens filer`,noAmsRfid:`Du har inte behörighet att läsa om AMS-RFID`,noSmartPlugControl:`Du har inte behörighet att kontrollera smarta kontakter`,noCamera:`Du har inte behörighet att visa kameror`},modal:{addTitle:`Lägg till skrivare`,editTitle:`Redigera skrivare`,myPrinter:`Min skrivare`,selectModel:`Välj modell...`,locationGroup:`Plats / grupp (valfritt)`,locationPlaceholder:`t.ex. Verkstad, Kontor, Källare`,autoArchiveLabel:`Auto-arkivera färdiga utskrifter`,fromPrinterSettings:`Från skrivarens inställningar`,modelOptional:`Modell (valfritt)`,saveChanges:`Spara ändringar`},skipObjects:{tooltip:`Hoppa över objekt`,onlyWhilePrinting:`Hoppa över objekt (endast under utskrift)`,requiresMultiple:`Hoppa över objekt (kräver 2+ objekt)`,title:`Hoppa över objekt`,matchIdsInfo:`Matcha ID:n med skrivarens display`,printerShowsIds:`Skrivarens skärm visar objekt-ID:n på byggplattan`,skipSelected:`Hoppa över valda`,skipping:`Hoppar över...`,noObjectsSelected:`Inga objekt valda`,selectObjectsToSkip:`Välj objekt du vill hoppa över från den aktuella utskriften`,skipped:`hoppades över`,objectsSkipped:`Objekt hoppades över`,activeCount:`{{count}} aktiva`,waitForLayer:`Vänta på skikt 2+ för att hoppa över objekt (nuvarande skikt {{layer}})`,skip:`Hoppa över`,confirmTitle:`Hoppa över objekt?`,confirmMessage:`Är du säker på att du vill hoppa över "{{name}}"? Detta kan inte ångras.`,confirmAllMessage:`Alla återstående objekt är valda. Detta kommer att stoppa utskriftsjobbet. Fortsätta?`,confirmMultipleMessage:`Hoppa över {{count}} valda objekt? Detta kan inte ångras.`},confirm:{deleteTitle:`Ta bort skrivare`,deleteMessage:`Är du säker på att du vill ta bort "{{name}}"? Detta kommer att ta bort alla anslutningsinställningar.`,deleteArchivesNote:`All utskriftshistorik för denna skrivare kommer att tas bort permanent.`,keepArchivesNote:`Utskriftshistorik kommer att behållas men inte längre vara kopplad till denna skrivare.`,stopTitle:`Stoppa utskrift`,stopMessage:`Är du säker på att du vill stoppa den aktuella utskriften på "{{name}}"? Detta kommer att avbryta utskriftsjobbet.`,stopButton:`Stoppa utskrift`,pauseTitle:`Pausa utskrift`,pauseMessage:`Är du säker på att du vill pausa den aktuella utskriften på "{{name}}"?`,pauseButton:`Pausa utskrift`,resumeTitle:`Fortsätt utskrift`,resumeMessage:`Är du säker på att du vill fortsätta utskriften på "{{name}}"?`,resumeButton:`Fortsätt utskrift`,powerOnTitle:`Sätt på skrivare`,powerOnMessage:`Är du säker på att du vill sätta på strömmen för "{{name}}"?`,powerOnButton:`Sätt på`,powerOffTitle:`Stäng av skrivare`,powerOffMessage:`Är du säker på att du vill stänga av strömmen för "{{name}}"?`,powerOffWarning:`VARNING: "{{name}}" skriver för närvarande ut! Är du säker på att du vill stänga av strömmen? Detta kommer att avbryta utskriften och kan skada skrivaren.`,powerOffButton:`Stäng av`,haToggleTitle:`Växla "{{name}}"`,haToggleMessage:`Växla Home Assistant-enheten {{entity}}? Detta kan stänga av strömmen om den för närvarande är på.`,haToggleWarning:`VARNING: "{{name}}" skriver för närvarande ut! Att växla {{entity}} kan bryta strömmen och avbryta utskriften. Fortsätta?`,haToggleButton:`Växla`},bulk:{select:`Välj`,selectAll:`Välj alla`,selectByLocation:`Välj efter plats`,selected:`{{count}} valda`,actions:{stop:`Stoppa`,pause:`Pausa`,resume:`Fortsätt`,clearPlate:`Töm byggplatta`,clearHMS:`Rensa notiser`},confirm:{stopTitle:`Stoppa {{count}} utskrifter`,stopMessage:`Detta kommer att avbryta aktiva utskrifter på {{count}} skrivare. Denna åtgärd kan inte ångras.`,stopButton:`Stoppa alla`,pauseTitle:`Pausa {{count}} utskrifter`,pauseMessage:`Detta kommer att pausa aktiva utskrifter på {{count}} skrivare.`,pauseButton:`Pausa alla`,clearPlateTitle:`Töm {{count}} byggplattor`,clearPlateMessage:`Detta kommer att tömma byggplattan på {{count}} skrivare och kan utlösa köade jobb.`,clearPlateButton:`Töm alla`},success:`{{action}} slutförd på {{count}} skrivare`,partial:`{{succeeded}} lyckades, {{failed}} misslyckades`,noneApplicable:`Inga valda skrivare är i rätt tillstånd för denna åtgärd`,selectByState:`Välj efter status`},discovery:{title:`Hitta skrivare`,searching:`Söker...`,scanning:`Skannar...`,scanProgress:`Skannar... {{scanned}}/{{total}}`,foundPrinters:`Hittade {{count}} skrivare`,noPrintersFound:`Inga skrivare hittade`,noPrintersFoundSubnet:`Inga skrivare hittade i det angivna subnätet.`,noPrintersFoundNetwork:`Inga skrivare hittade i nätverket.`,allConfigured:`Alla hittade skrivare är redan konfigurerade.`,alreadyAdded:`Redan tillagd`,select:`Välj`,manualEntry:`Manuell inmatning`,addFromCloud:`Lägg till från molnet`,subnetToScan:`Subnät att söka`,dockerNote:`Docker upptäckt. Ange din skrivares subnät i CIDR-notation. Kräver network_mode: host i docker-compose.yml.`,scanSubnet:`Skanna subnät efter skrivare`,discoverNetwork:`Hitta skrivare i nätverket`,scanningSubnet:`Söker subnät efter Bambu-skrivare...`,scanningNetwork:`Söker nätverk...`,serialRequired:`Serienummer krävs`,unknown:`Okänd`,failedToStart:`Kunde inte starta skanning`,customSubnetOption:`Anpassat subnät...`,customSubnetLabel:`Anpassat subnät (CIDR)`,customSubnetNote:`Använd ett anpassat subnät om din skrivare är på ett annat nätverk än denna server. FTP (990) och MQTT (8883) portarna måste vara nåbara över routningsgränsen.`},drying:{start:`Starta torkning`,stop:`Stoppa torkning`,temperature:`Temperatur`,duration:`Varaktighet`,hours:`timmar`,timeRemaining:`{{time}} kvar`,active:`Torkar`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`Torkning stöds inte`,powerRequired:`Anslut AMS-strömadapter för att aktivera torkning`,cannotDryNow:`AMS kan inte börja torka just nu`,startingDrying:`Startar torkning...`,toastCommandSent:`Torkningskommando skickat`,toastStopped:`Torkning stoppad`,toastNotStarted:`Skrivaren accepterade kommandot men AMS startade aldrig torkning. Kontrollera att AMS-strömadaptern är ansluten och att skrivaren är inaktiv.`,screenOnly:`AMS-torkning på denna skrivare kan endast kontrolleras från skrivarens egen skärm (Bambu-begränsning)`,stoppingDrying:`Stoppar torkning...`,rotateTray:`Roterar rulle under torkning`,rotateUnavailableReason:`Ej tillgänglig — en slot i denna AMS är laddad till verktygshuvudet. Rullen är låst av matarröret och kan inte rotera. Dra tillbaka filamentet först.`,startMode:`Starttid`,modeNow:`Nu`,modeDelay:`Efter fördröjning`,modeAtTime:`Vid tidpunkt`,schedule:`Schemalägg`,scheduledFor:`Torkning schemalagd för {{time}}`,scheduledAsap:`Torkning schemalagd (väntar på skrivare)`,cancelScheduled:`Avbryt schemalagd torkning`,scheduleFailed:`Kunde inte schemalägga torkning`,retractFilament:`Dra tillbaka filamentet vid AMS-utloppet för att starta torkning`,waitingAmsNotFound:`Väntar på att AMS ska upptäckas`,waitingOffline:`Väntar på att skrivaren ska bli online`,waitingPrinterBusy:`Väntar på att skrivaren ska bli ledig`,waitingAlreadyDrying:`Väntar på att den aktuella torkningscykeln ska slutföras`,waitingInterrupted:`Avbruten, kommer att starta om när skrivaren är ledig`,scheduleFailedReason:`Schemalagd torkning misslyckades: {{reason}}`,scheduleFailedUnknown:`Okänt fel`,dismissFailed:`Avfärda`},amsBackup:{titleOn:`AMS filamentbackup är PÅ. Klicka för att inaktivera.`,titleOff:`AMS filamentbackup är AV. Klicka för att aktivera.`,titleUnknown:`AMS filamentbackupstatus ej tillgänglig på denna skrivare.`,toastEnabled:`AMS filamentbackup aktiverad`,toastDisabled:`AMS filamentbackup inaktiverad`,modalTitle:`AMS filamentbackup`,modalHelp:`När det aktiva facket tar slut går skrivaren genom alla matchande fack med samma inställningar och färg i denna ordning.`,modalNoSlots:`Inga filament laddade.`,modalNoPairs:`Inga backup-par — inga fack delar samma filamentprofil och färg.`,extruderRightShort:`H`,extruderLeftShort:`V`,stateOn:`Aktiverad`,stateOff:`Inaktiverad`,stateUnknown:`Stöds inte på denna skrivare`},activeJobSlot:{title:`Detta fack är filament {{n}} i den aktiva utskriften`,ariaLabel:`Aktivt fack {{n}}`},expectedSlot:{title:`Skrivaren väntar på filament i detta fack`,ariaLabel:`Förväntat filamentfack {{n}}`,label:`{{ams}} · Fack {{slot}}`,external:`Extern rulle`},filaments:`Filament`,externalSpool:{hide:`Dölj extern rulle`,show:`Visa extern rulle`},openCameraOverlay:`Öppna kameran i överlägg`,openCameraWindow:`Öppna kameran i nytt fönster`,firmwareUpdateAvailable:`Firmwareuppdatering tillgänglig: {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — Uppdaterad`,firmwareUpdateButton:`Uppdatera`,plateDetection:{noPermission:`Du har inte behörighet att uppdatera skrivare`,enabledClick:`Plattkontroll aktiverad – Klicka för att inaktivera`,disabledClick:`Plattkontroll inaktiverad – Klicka för att aktivera`,manageCalibration:`Hantera plattdetekteringskalibrering`,calibrationRequired:`Kalibrering krävs`,calibrationInstructions:`Se till att byggplattan är <strong>helt tom</strong>, klicka sedan på Kalibrera.`,calibrationDescription:`Kalibrering tar en referensbild av den tomma plattan. Framtida kontroller kommer att jämföras med denna referens för att upptäcka objekt.`,calibrationTip:`<strong>Tips:</strong> Du kan spara upp till 5 kalibreringar för olika plattor. Systemet använder automatiskt den bästa matchningen vid kontroll.`,plateEmpty:`Plattan verkar tom`,objectsDetected:`Objekt upptäckta på plattan`,confidence:`Säkerhet`,difference:`Skillnad`,analysisPreview:`Analysförhandsvisning:`,analysisLegend:`Grön ruta = detekteringsområde, Rött överlägg = skillnad från kalibrering`,savedReferences:`Sparade referenser ({{count}}/{{max}})`,deleteReference:`Ta bort referens`,labelPlaceholder:`Etikett...`,clickToEdit:`{{label}} – Klicka för att redigera`,clickToAddLabel:`Klicka för att lägga till etikett`},speed:{title:`Utskriftshastighet`,silent:`Tyst (50%)`,standard:`Standard (100%)`,sport:`Sport (124%)`,ludicrous:`Löjlig (166%)`},airduct:{title:`Luftkanalsläge`,cooling:`Kylning`,heating:`Uppvärmning`},noSdCard:`Inget SD-kort`,door:{open:`Öppen`,closed:`Stängd`},fans:{partCooling:`Delkylningsfläkt`,auxiliary:`Hjälpfläkt`,leftAuxiliary:`Vänster hjälpfläkt`,exhaust:`Frånluft`,chamber:`Kammarfläkt`},clickToViewHmsErrors:`Klicka för att visa HMS-fel`,aiDetection:{safe:`Säker`,warning:`Varning`,failure:`Fel`,idle:`Inaktiv`,error:`Kontrollerar ej`,unknown:`Startar`,tooltipError:`AI-feldetektering kontrollerar inte denna utskrift: {{reason}} - klicka för detaljer`,tooltipUnknown:`AI-feldetektering: väntar på det första resultatet - klicka för detaljer`,errorHint:`Denna utskrift kontrolleras ej. Detekteringen återupptas automatiskt när problemet nedan är åtgärdat.`,tooltip:`AI-feldetektering: {{status}} (score {{score}}) - klicka för detaljer`,tooltipIdle:`AI-feldetektering aktiverad – övervakning startar med nästa utskrift – klicka för detaljer`,modalTitle:`AI-feldetektering – {{name}}`,currentStatus:`Status`,score:`Poäng`,framesAnalyzed:`Analyserade bilder`,idleHint:`Ingen utskrift övervakas för närvarande. Övervakning startar automatiskt med nästa utskrift.`,lastError:`Senaste fel`,openSettings:`Öppna inställningar`},estimatedCompletion:`Beräknad färdigställningstid`,plateNumber:`Platta {{number}}`,slotOptions:`Fackalternativ`,amsPopup:{friendlyName:`AMS-namn`,friendlyNamePlaceholder:`t.ex. AMS Vänligt Namn`,serialNumber:`Serienummer`,firmwareVersion:`Firmware`,save:`Spara`,clear:`Rensa`,noEditPermission:`Du har inte behörighet att döpa om AMS-enheter`},firmwareModal:{title:`Firmwareuppdatering`,titleUpToDate:`Firmwareinformation`,currentVersion:`Aktuell:`,latestVersion:`Senaste:`,releaseNotes:`Versionsinformation`,checkingPrereqs:`Kontrollerar förutsättningar...`,sdCardReady:`SD-kort redo. Klicka nedan för att ladda upp firmware.`,uploadedSuccess:`Firmware uppladdat till SD-kort!`,applyInstructions:`För att tillämpa uppdateringen på din skrivare:`,step1:`På skrivarens pekskärm, gå till <strong>Inställningar</strong>`,step2:`Navigera till <strong>Firmware</strong>`,step3:`Välj <strong>Uppdatera från SD-kort</strong>`,step4:`Uppdateringen tar 10-20 minuter`,done:`Klar`,starting:`Startar...`,uploadFirmware:`Ladda upp firmware`,uploadFailed:`Kunde inte starta uppladdning: {{error}}`,uploadedToast:`Firmware uppladdat! Trigga uppdatering från skrivarens skärm.`,availableVersions:`Tillgängliga versioner`,usable:`Användbar`,unavailable:`Ej tillgänglig`,installed:`Installerad`,newerBadge:`nyare`,olderBadge:`äldre`,currentBadge:`aktuell`},accessCodePlaceholder:`Lämna tomt för att behålla nuvarande`,roi:{title:`Detekteringsområde (ROI)`,xStart:`X start`,yStart:`Y start`,width:`Bredd`,height:`Höjd`,instruction:`Justera detekteringsområdet för att fokusera på byggplattan. Den gröna rutan i förhandsvisningen visar det aktuella området.`},developerModeWarning:`Utvecklar-LAN-läge är inte aktiverat på: {{names}}. Vissa funktioner kommer kanske inte att fungera.`,howToEnable:`Hur man aktiverar`,incompatibleFile:`Denna fil var slicad för {{slicedFor}}, men denna skrivare är en {{printerModel}}`,dropNotPrintable:`Endast .gcode- och .gcode.3mf-filer kan skrivas ut`,dropToPrint:`Släpp för att skriva ut`,dropToQueue:`Skrivare upptagen`},archives:{media:{title:`Skrivarvideor`,download:`Ladda ner skrivarvideor`,searching:`Kollar skrivaren efter videor`,searchFailed:`Kunde inte kolla efter videor.`,none:`Ingen timelapse- eller IP-kamerabitar hittades för denna utskrift.`,attachedTimelapse:`Bifogad timelapse`,printerFiles:`Filer kvar på skrivaren`,downloadSelected:`Nerladdning vald`,printerMissing:`Skrivaren är inte längre konfigurerad`,timelapseUnavailable:`Timelapse-mappen kunde inte läsas`,ipcamUnavailable:`IP-kameramappen kunde inte läsas`},title:`Utskriftsarkiv`,no3mfBanner:{title:`Vissa av de senaste utskrifterna kunde inte arkiveras med minibilder`,body:`Slicer-programmet lämnade inte .gcode.3mf på skrivarens SD-kort så Bambuddy kunde inte hämta minibilden eller slicer-programmets metadata. Detta beror vanligtvis på att "Lagra skickade filer på extern lagring" är avstängt i slicer-programmet (Bambu Studio / OrcaSlicer).`,docsLink:`Se installationssteg 4`,dismissLabel:`Avfärda denna notis`,docsLinkInternalStorage:`Varför detta händer`,titleInternalStorage:`Vissa av de senaste utskrifterna blev kvar i skrivarens interna lagring`,bodyInternalStorage:`Bambu Studio placerade den slicade filen på skrivarens interna lagring istället för på kortet, så det fanns ingenting för Bambuddy att läsa via FTP. På H2-serien och P2S gör dess Skriv ut-knapp alltid det — endast Skicka erbjuder ett val, och det förvalet är Cache också. Dessa utskrifter arkiveras ändå med sitt namn och tid, bara utan en minibild eller slicer-inställningar. För kompletta arkiv, starta utskriften från Bambuddy, eller slica i OrcaSlicer — eller i Bambu Studio, använd Skicka med Extern valt och starta utskriften därefter. Alla kräver ett kort eller en USB-minne i skrivaren.`,titleNoExternalStorage:`Vissa av de senaste utskrifterna kunde inte arkiveras — ingen lagring i skrivaren`,bodyNoExternalStorage:`Skrivaren rapporterar inget kort eller USB-minne i sitt fack, så den slicade filen hade ingenstans att hamna och Bambuddy hade ingenting att läsa. Sätt in ett och nästa utskrift kommer att arkiveras fullständigt.`,titleInternalHistory:`Vissa av de senaste utskrifterna startades från en fil som redan fanns på skrivaren`,bodyInternalHistory:`Dessa utskrifter kördes från skrivarens eget bibliotek — en omutskrift från dess skärm, en start från Handy, eller en fil som skickades tidigare och skrivits ut senare. Bambuddy läser utskriftsfiler via FTP, som endast betjänar kortet eller USB-minnet, medan skrivaren håller det biblioteket i ett område som FTP inte kan nå, så det fanns ingen 3MF att läsa. Ingen slicer-inställning ändrar detta, eftersom ingenting skickades för dessa utskrifter. De arkiveras ändå med sitt namn och tid, och Redigera arkiv låter dig fylla i det använda filamentet manuellt. För ett komplett arkiv, starta utskriften från Bambuddy eller från din slicer istället.`,titleFtpsCooloff:`Vissa av de senaste utskrifterna kunde inte arkiveras – skrivaren vägrade filanslutningen`,bodyFtpsCooloff:`Bambuddy öppnade skrivarens filöverföringsport (FTPS 990) och skrivaren svarade med något som inte är TLS, så inget kunde läsas från det. Dessa utskrifter arkiveras fortfarande med deras namn och tidpunkt, bara utan en miniatyrbild eller metadata för slicer. Det här är inte en slicer-inställning och inte något du har ändrat - samma modeller och firmware körs normalt på andra installationer, och en påverkad skrivare fungerar vanligtvis igen senare på egen hand. Efter ett sådant misslyckande pausar Bambuddy överföringarna till den skrivaren i fem minuter och kommer tillbaka för filen när pausen försvinner, så ett kort avsnitt fylls av sig själv; ett kort som fortfarande är tomt betyder att vägran var längre än ett nytt försök. Vad som utlöser det är ännu inte känt. Om det fortsätter att hända, aktivera felsökningsloggning på systemsidan och bifoga ett supportpaket till din rapport.`,titleFtpTransferFailed:`Vissa av de senaste utskrifterna kunde inte arkiveras – filöverföringen fick slut på tid`,bodyFtpTransferFailed:`Den slicade filen fanns på skrivarens minneskort och skrivaren serverade den, men överföringen slutfördes inte inom den tillåtna tiden. Vid utskriftsstart hanterar skrivaren också sin kamera, dess statusmeddelanden och uppladdningen av jobb, och en stor 3MF kommer inte alltid igenom allt detta. Dessa utskrifter arkiveras fortfarande med deras namn och timing, bara utan en miniatyrbild eller slicer-metadata. Det här är inte en slicer-inställning och inte något du har ändrat. Bambuddy kommer tillbaka för filen tre gånger under de följande tio minuterna, så de flesta av dessa fyller i sig själva; ett minneskort som fortfarande är tomt betyder att varje försök också fick slut på tid. Om det fortsätter att hända, höj anslutningstidsgränsen under Inställningar > Nätverk > FTP-försök igen.`},searchPlaceholder:`Sök i arkiv...`,filterByPrinter:`Filtrera efter skrivare`,filterByStatus:`Filtrera efter status`,sortBy:`Sortera efter`,sortNewest:`Nyaste först`,sortOldest:`Äldsta först`,sortName:`Namn`,sortDuration:`Varaktighet`,sortLargest:`Största först`,sortSmallest:`Minsta först`,sortSize:`Storlek`,noArchives:`Inga arkiv hittade`,noArchivesSearch:`Inga arkiv matchar din sökning`,originalPrintNotVisible:`Originalutskriften syns inte – prova att nollställa filter`,noArchivesYet:`Inga arkiv än`,prints:`utskrifter`,pagination:{showing:`Visar`,to:`till`,of:`av`,show:`Visa`,page:`Sida`,all:`Alla`},loadingArchives:`Laddar arkiv...`,releaseToUpload:`Släpp för att ladda upp`,showAll:`Visa alla`,showFavoritesOnly:`Visa endast favoriter`,gridView:`Rutnätsvy`,listView:`Listvy`,calendarView:`Kalendervy`,logView:`Utskriftslogg`,manageTags:`Hantera taggar`,showFailedPrints:`Visa misslyckade utskrifter`,hideFailedPrints:`Dölj misslyckade utskrifter`,hideDuplicates:`Dölj dubbletter`,viewOriginalPrint:`Klicka för att visa originalutskrift (#{{id}})`,printTime:`Utskriftstid`,filamentUsed:`Filament använt`,cost:`Kostnad`,preview:`Förhandsgranskning`,deleteArchive:`Ta bort arkiv`,deleteConfirm:`Är du säker på att du vill ta bort detta arkiv?`,favorite:`Favorit`,unfavorite:`Ta bort från favoriter`,viewDetails:`Visa detaljer`,status:{completed:`Slutförd`,failed:`Misslyckad`,stopped:`Stoppad`},toast:{source3mfAttached:`3MF-källfil bifogad: {{filename}}`,failedUploadSource3mf:`Kunde inte ladda upp 3MF-källfil`,source3mfRemoved:`3MF-källfil borttagen`,failedRemoveSource3mf:`Kunde inte ta bort 3MF-källfil`,f3dAttached:`F3D bifogad: {{filename}}`,failedUploadF3d:`Kunde inte ladda upp F3D`,f3dRemoved:`F3D borttagen`,failedRemoveF3d:`Kunde inte ta bort F3D`,timelapseAttached:`Timelapse bifogad: {{filename}}`,timelapseAlreadyAttached:`Timelapse redan bifogad`,noMatchingTimelapse:`Ingen matchande timelapse hittad`,failedScanTimelapse:`Kunde inte söka efter timelapse`,failedAttachTimelapse:`Kunde inte bifoga timelapse`,timelapseRemoved:`Timelapse borttagen`,failedRemoveTimelapse:`Kunde inte ta bort timelapse`,timelapseUploaded:`Timelapse uppladdad: {{filename}}`,failedUploadTimelapse:`Kunde inte ladda upp timelapse`,archiveDeleted:`Arkiv borttaget`,failedDeleteArchive:`Kunde inte ta bort arkiv`,addedToFavorites:`Tillagd i favoriter`,removedFromFavorites:`Borttagen från favoriter`,projectUpdated:`Projekt uppdaterat`,failedUpdateProject:`Kunde inte uppdatera projekt`,linkCopied:`Länk kopierad till urklipp`,failedCopyLink:`Kunde inte kopiera länk`,photoDeleted:`Foto borttaget`,failedDeletePhoto:`Kunde inte ta bort foto`,failedDeleteArchives:`Kunde inte ta bort arkiv`,failedUpdateFavorites:`Kunde inte uppdatera favoriter`,exportDownloaded:`Nedladdning exporterad`,exportFailed:`Export misslyckades`},menu:{print:`Skriv ut`,openInBambuStudio:`Öppna i slicer-program`,slice:`Slica`,externalLink:`Extern länk`,viewOnMakerWorld:`Visa på MakerWorld`,preview3d:`3D-förhandsgranskning`,viewTimelapse:`Visa timelapse`,scanForTimelapse:`Sök efter timelapse`,uploadTimelapse:`Ladda upp timelapse`,removeTimelapse:`Ta bort timelapse`,downloadSource3mf:`Ladda ner 3MF-källfil`,uploadSource3mf:`Ladda upp 3MF-källfil`,replaceSource3mf:`Ersätt 3MF-källfil`,removeSource3mf:`Ta bort 3MF-källfil`,uploadF3d:`Ladda upp F3D`,replaceF3d:`Ersätt F3D`,downloadF3d:`Ladda ner F3D`,removeF3d:`Ta bort F3D`,download:`Ladda ner`,copyDownloadLink:`Kopiera nedladdningslänk`,qrCode:`QR-kod`,viewPhotos:`Visa bilder`,viewPhotosCount:`Visa bilder ({{count}})`,projectPage:`Projektsida`,addToFavorites:`Lägg till i favoriter`,removeFromFavorites:`Ta bort från favoriter`,edit:`Redigera`,printLog:`Utskriftslogg`,goToProject:`Gå till projekt: {{name}}`,addToProject:`Lägg till i projekt`,removeFromProject:`Ta bort från projekt`,loading:`Laddar...`,noProjectsAvailable:`Inga projekt tillgängliga`,searchProjects:`Sök projekt...`,select:`Välj`,deselect:`Avmarkera`,delete:`Ta bort`},permission:{noReprint:`Du har inte behörighet att skriva ut detta arkiv igen`,noAddToQueue:`Du har inte behörighet att lägga till i kö`,noUpdateArchives:`Du har inte behörighet att uppdatera arkiv`,noUploadFiles:`Du har inte behörighet att ladda upp filer`,noDownload:`Du har inte behörighet att ladda ner arkiv`,noCopyLink:`Du har inte behörighet att kopiera nedladdningslänkar`,noDelete:`Du har inte behörighet att ta bort detta arkiv`,noEdit:`Du har inte behörighet att redigera denna post`,noCreate:`Du har inte behörighet att skapa arkiv`},platePicker:{title:`Välj platta för förhandsgranskning`,hint:`Detta arkiv har flera plattor. Välj en för att öppna i GCode-visaren.`,plateLabel:`Platta {{index}}`,objectCount:`{{count}} objekt`,objectCount_plural:`{{count}} objekt`,noGcode:`Detta arkiv har ingen slicad G-kod för förhandsgranskning. Öppna det i Bambu Studio för att slica först.`},card:{previousPlate:`Föregående platta`,nextPlate:`Nästa platta`,plateNumber:`Platta {{index}}`,moreOptions:`Högerklicka för fler alternativ`,addToFavorites:`Lägg till i favoriter`,removeFromFavorites:`Ta bort från favoriter`,cancelled:`avbruten`,failed:`misslyckad`,duplicate:`kopia`,duplicateTitle:`Denna modell har skrivits ut tidigare`,openSource3mf:`Öppna 3MF-källfil i Bambu Studio (högerklicka för fler alternativ)`,downloadF3d:`Ladda ner Fusion 360-designfil`,viewTimelapse:`Visa timelapse`,viewPhoto:`Visa 1 foto`,viewPhotos:`Visa {{count}} foton`,openFolder:`Öppna mapp: {{name}}`,slicedFile:`Slicad fil – redo att skriva ut`,sourceFile:`Endast källfil – ingen AMS-mappning tillgänglig`,gcode:`GCODE`,source:`KÄLLA`,project:`Projekt: {{name}}`,runsBadge:`{{count}} utskrifter`,runsBadgeTitle:`{{count}} utskrifter totalt — {{successful}} lyckade, {{failed}} misslyckade. Klicka för att se hela utskriftsloggen.`,estimated:`Uppskattad: {{time}}`,actual:`Faktisk: {{time}}`,accuracy:`Noggrannhet: {{percent}}%`,filament:`{{weight}}g`,layer:`{{count}} skikt`,layers:`{{count}} skikt`,object:`{{count}} objekt`,objects:`{{count}} objekt`,slicedFor:`Slicad för {{model}}`,uploadedBy:`Uppladdad av`,noPermissionReprint:`Du har inte behörighet att skriva ut igen`,noFileForReprint:`Ingen 3MF-fil tillgänglig — filen kunde inte laddas ner från skrivaren när utskriften registrerades`,slicerAmsMapping:`AMS-mappning sparad ({{printer}})`,slicerAmsMappingTooltip:`Slicer-programmets eget val av AMS-fack sparades för {{printer}}. Bricknummer betyder endast något på den skrivaren, så en omutskrift återanvänder dem endast när den riktas till {{printer}} igen.`,noPermissionEdit:`Du har inte behörighet att redigera arkiv`,noPermissionDelete:`Du har inte behörighet att ta bort arkiv`,openInBambuStudio:`Öppna i slicer-program`,openInBambuStudioToSlice:`Öppna i slicer-program för att slica`,slice:`Slica`,externalLink:`Extern länk`,makerWorld:`MakerWorld: {{designer}}`,viewProject:`Visa projekt`,noExternalLink:`Ingen extern länk`,preview3d:`3D-förhandsgranskning`,download:`Ladda ner`,edit:`Redigera`,delete:`Ta bort`},runLog:{title:`Utskriftslogg`,modalTitle:`Utskriftslogg — {{name}}`,modalTitleFallback:`detta arkiv`,empty:`Inga utskriftshändelser registrerade för detta arkiv än.`,col:{date:`Datum`,status:`Status`,duration:`Varaktighet`,filament:`Filament`,cost:`Kostnad`},status:{completed:`Slutförd`,failed:`Misslyckad`,cancelled:`Avbruten`,stopped:`Stoppad`,skipped:`Hoppad över`,printing:`Skriver ut`}},modal:{deleteArchive:`Ta bort arkiv`,deleteConfirm:`Är du säker på att du vill ta bort "{{name}}"? Denna åtgärd kan inte ångras.`,deleteButton:`Ta bort`,deletePurgeStats:`Ta också bort denna utskrift från Snabbstatistik (filament, tid, kostnad, energi)`,deleteQueueItemsWarning:`{{count}} köade artiklar kopplade till detta arkiv kommer också att tas bort.`,deleteBlockedByPrinting:`Kan inte ta bort — {{count}} köade artiklar skrivs för närvarande ut. Stoppa utskriften först och försök sedan igen.`,removeSource3mf:`Ta bort 3MF-källfil`,removeSource3mfConfirm:`Är du säker på att du vill ta bort 3MF-källfilen från "{{name}}"? Detta kommer att ta bort originalfilen från slicer-programmet.`,removeButton:`Ta bort`,removeF3d:`Ta bort F3D`,removeF3dConfirm:`Är du säker på att du vill ta bort Fusion 360-designfilen från "{{name}}"?`,removeTimelapse:`Ta bort timelapse`,removeTimelapseConfirm:`Är du säker på att du vill ta bort timelapse-videon från "{{name}}"?`,timelapse:`{{name}} — Timelapse`,selectTimelapse:`Välj timelapse`,selectTimelapseDesc:`Ingen automatisk matchning hittad. Välj timelapse för denna utskrift:`,deleteArchives:`Ta bort arkiv`,deleteArchivesConfirm:`Är du säker på att du vill ta bort {{count}} arkiv? Denna åtgärd kan inte ångras.`,deleteCount:`Ta bort {{count}}`},page:{title:`Arkiv`,printsCount:`{{filtered}} av {{total}} utskrifter`,dropFilesHere:`Släpp .3mf-filer här`,releaseToUpload:`Släpp för att ladda upp`,only3mfSupported:`Endast .3mf-filer stöds`,close:`Stäng`,selected:`{{count}} valda`,selectAll:`Välj alla`,tags:`Taggar`,project:`Projekt`,favorite:`Favorit`,delete:`Ta bort`,toggledFavorites:`Växlade favoriter för {{count}} arkiv`,failedUpdateFavorites:`Kunde inte uppdatera favoriter`,archivesDeleted:`{{count}} arkiv borttagna`,failedDeleteArchives:`Kunde inte ta bort arkiv`,photoDeleted:`Foto borttaget`,failedDeletePhoto:`Kunde inte ta bort foto`},list:{name:`Namn`,printer:`Skrivare`,date:`Datum`,size:`Storlek`,actions:`Åtgärder`,hasTimelapse:`Har timelapse`},log:{date:`Datum`,printName:`Utskriftsnamn`,printer:`Skrivare`,user:`Användare`,status:`Status`,duration:`Varaktighet`,filament:`Filament`,filamentUsed:`Filament använt`,cost:`Kostnad`,energy:`Energi`,energyCost:`Energikostnad`,completedAt:`Slutförd`,columns:`Kolumner`,sortBy:`Sortera efter {{column}}`,allPrinters:`Alla skrivare`,allUsers:`Alla användare`,allStatuses:`Alla statusar`,cancelled:`Avbruten`,skipped:`Hoppad över`,dateFrom:`Från`,dateTo:`Till`,noEntries:`Inga utskriftsloggposter hittade`,showing:`Visar {{count}} av {{total}} poster`,rowsPerPage:`Rader`,page:`Sida`,prev:`Föregående`,next:`Nästa`,clearLog:`Rensa logg`,clearLogTitle:`Rensa utskriftslogg`,clearLogConfirm:`Alla utskriftsloggposter kommer att tas bort permanent. Arkiv och köposter påverkas inte. Denna åtgärd kan inte ångras. Är du säker?`,clearLogButton:`Rensa alla`,cleared:`{{count}} loggposter rensade`,clearFailed:`Kunde inte rensa utskriftslogg`,deleteEntryTitle:`Ta bort utskriftsloggpost`,deleteEntryConfirm:`Denna post kommer att tas bort från loggen och dess bidrag till filament, tid och kostnad kommer att tas bort från Snabbstatistik. Matchande arkiv (om något) påverkas inte. Denna åtgärd kan inte ångras.`,entryDeleted:`Utskriftsloggpost borttagen`,entryDeleteFailed:`Kunde inte ta bort utskriftsloggpost`,editEntryTitle:`Redigera utskriftsloggpost`,editEntryDescription:`Klassificera denna utskrift. Widgeten för felanalys grupperar efter dessa värden, så uppdateringar flödar omedelbart till statistiken.`,entryUpdated:`Utskriftsloggpost uppdaterad`,entryUpdateFailed:`Kunde inte uppdatera utskriftsloggpost`,statuses:{completed:`Slutförd`,failed:`Misslyckad`,stopped:`Stoppad`,cancelled:`Avbruten`,skipped:`Hoppad över`}}},dispatchToast:{untitled:`Utskriftsjobb`,startingPrints:`Startar utskrifter`,progressSummary:`{{complete}}/{{total}} klara • Bearbetar: {{processing}}`,expandDetails:`Visa detaljer för utskicksinformation`,collapseDetails:`Dölj detaljer för utskicksinformation`,awaitingPrinter:`Väntar på skrivare…`,status:{processing:`Bearbetar`,completed:`Slutförd`,failed:`Misslyckad`},failed:{generic:`Utskick misslyckades`,upload_failed:`Kunde inte ladda upp till skrivare`,start_command_failed:`Skrivaren avvisade startkommandot`},dismiss:`Avfärda`},pipelineRuns:{title:`Pipeline-körningar`,loading:`Laddar…`,empty:`Inga pipeline-körningar än.`,filter:{pipeline:`Pipeline`,status:`Status`,target:`Mål`,all:`Alla`,allPipelines:`Alla pipelines`,allStatus:`Alla statusar`,allTargets:`Alla mål`,clear:`Rensa filter`,noMatches:`Inga körningar matchar de aktuella filtren.`},totalCount_one:`{{n}} körning`,totalCount_other:`{{n}} körningar`,copies:`{{n}} kopior`,failedCount:`{{n}} misslyckade`,copyN:`Kopiera {{n}}`,retryFailed:`Kunde inte försöka igen`,retryOf:`omförsök av #{{n}}`,pagination:`{{start}}–{{end}} av {{total}}`,cancelledByUser:`Avbruten av användare`,toast:{cancelled:`Körning avbruten`,cancelFailed:`Kunde inte avbryta`,retryStarted:`Omförsök påbörjat`,retryFailed:`Kunde inte försöka igen`,cleared:`{{n}} körningar rensade`,clearFailed:`Kunde inte rensa`},clearLog:`Rensa logg`,clearConfirmTitle:`Rensa logg?`,clearConfirmBody:`Ta bort alla slutförda, misslyckade, avbrutna och delvis misslyckade pipeline-körningar? Pågående körningar behålls. Denna åtgärd kan inte ångras.`,clearConfirmAction:`Rensa`,jobStatus:{pending:`väntande`,awaiting_printer:`väntar på skrivare`,queued:`i kö`,printing:`skriver ut`,completed:`slutförd`,failed:`misslyckad`,cancelled:`avbruten`}},queue:{title:`Utskriftskö`,subtitle:`Schemalägg och hantera dina utskriftsjobb`,filamentShort:{rowBadge:`Otillräckligt filament för den tilldelade rullen`,rowTooltip:`Utskicksschemaläggaren markerade denna post. Klicka på Spela för att se underskottet per fack och bestämma om du vill skriva ut ändå.`,confirmTitle:`Otillräckligt filament`,confirmIntro:`Den tilldelade rullen kan inte tillfredsställa åtminstone ett fack. Skriv ut ändå?`,lineItem:`Fack {{slot}}: behöver {{required}} g, {{remaining}} g kvar`,unknown:`okänd`,printAnyway:`Skriv ut ändå`},slicerAmsMapping:{rowBadge:`AMS-fack sparade för denna skrivare`,rowTooltip:`Detta arkiv innehåller de exakta AMS-fack som slicer-programmet valde, sparade för den skrivare denna post riktar sig till. En omutskrift på den kan återanvända dessa brickor istället för att matcha igen efter typ och färg.`},editQueueItem:`Redigera köad artikel`,selectAllPlates:`Markera alla {{count}} plattor`,deselectAll:`Avmarkera alla`,printQueued:`Utskrift köad`,printQueuedWillStartWhenIdle:`Kommer att starta när skrivaren är inaktiv`,itemsQueued:`{{count}} poster i kö`,sending:`Skickar...`,sendingProgress:`Skickar {{current}}/{{total}}...`,adding:`Lägg till...`,addingProgress:`Lägger till {{current}}/{{total}}...`,savingProgress:`Sparar {{current}}/{{total}}...`,clearQueue:`Rensa kö`,clearHistory:`Rensa historik`,emptyQueue:`Kön är tom`,position:`Position`,scheduledTime:`Schemalagd tid`,moveUp:`Flytta upp`,moveDown:`Flytta ner`,startNow:`Starta nu`,printingInProgress:`Skriver ut...`,viewArchive:`Visa arkiv`,viewInFileManager:`Visa i Filhanteraren`,itemCount:`{{count}} artikel`,itemCount_plural:`{{count}} artiklar`,dragToReorder:`Dra för att ordna om (endast ASAP)`,reorderHint:`Position påverkar endast ASAP-poster. Schemalagda poster körs vid sin inställda tid.`,sjf:{label:`SJF`,tooltip:`Kortast jobb först — schemaläggaren prioriterar korta utskrifter`},addedBy:`Tillagd av {{name}}`,nextInQueue:`Nästa i kön`,clearPlateSuccess:`Platta rensad — redo för nästa utskrift`,plateNumber:`Platta {{index}}`,quantity:`Kvantitet`,quantityHint:`Skapar {{count}} köade artiklar`,plateQuantityLabel:`Körningar av {{plate}}`,plateQuantityTotal_one:`{{count}} körning totalt`,plateQuantityTotal_other:`{{count}} körningar totalt`,batchOrders:{title:`Batchordrar`,emptyTitle:`Inga batchordrar`,emptyDescription:`Köa en fil med flera plattor, eller mer än en kopia av en platta, så visas ordern här med dess framsteg.`,filter:{active:`Aktiv`,completed:`Slutförd`,cancelled:`Avbruten`,all:`Alla`},status:{active:`Aktiv`,completed:`Slutförd`,cancelled:`Avbruten`},noTargets:`Endast gruppering`,noTargetsHint:`Skapad innan per-platta-mål existerade, så den spårar de körningar den köade istället för ett mål.`,dispatchRemaining:`Kö {{count}} återstående`,dispatchPlate:`Kö återstående`,strandedPlate:`Inget kvar att kopiera inställningar från`,strandedNotice:`Kan inte köa {{runs}} av {{owed}} körningar som fortfarande är i skuld: den plattan har ingen kö eller färdig körning kvar att kopiera inställningar från. Ställ plattan i kö en gång från filen, eller avbryt beställningen.`,dispatched:`Köade de återstående körningarna för {{name}}`,plateProgress:`{{completed}} av {{target}} klara`,remaining:`{{count}} återstående`,failed:`{{count}} misslyckade`,printing:`{{count}} skriver ut`,wholeFile:`Hela filen`,due:`Förfaller {{date}}`,costSoFar:`{{amount}} hittills`,costRemaining:`({{amount}} kvar)`},activeBatches:`Aktiva batcher`,batchProgress:`{{completed}} av {{total}} slutförda`,cancelBatch:`Avbryt återstående`,batchCancelled:`Återstående batchartiklar avbrutna`,cancelBatchConfirmTitle:`Avbryt batch`,cancelBatchConfirmMessage:`Avbryt alla återstående väntande artiklar i denna batch?`,batch:{defaultName:`Batch`,label:`{{count}} artikel`,label_plural:`{{count}} artiklar`,pendingCount:`{{count}} väntande`,pendingCount_plural:`{{count}} väntande`,expand:`Expandera batch`,collapse:`Minimera batch`,groupAsBatch:`Gruppera som batch...`,groupAsBatchDescription:`Kombinera de {{count}} markerade posterna till en enda hopfällbar batch.`,nameLabel:`Batchnamn`,namePlaceholder:`t.ex. Fredagspresenter`,create:`Skapa batch`,ungroup:`Avgruppera`,ungroupConfirmTitle:`Avgruppera batch?`,ungroupConfirmMessage:`Posterna kommer att förbli i kön men kommer inte längre att grupperas ihop.`,dragGroup:`Dra grupp`},tabs:{batches:`Batchar`,queue:`Kö`,history:`Historik`,timeline:`Tidslinje`,pipelines:`Pipelines`},layout:{flatList:`Lista`,byPrinter:`Efter skrivare`,groupByPrinter:`Gruppera efter skrivare`},history:{emptyTitle:`Ingen historik än`,emptyDescription:`Slutförda, avbrutna och misslyckade utskrifter kommer att visas här.`,showMore:`Visa mer`,showingCount:`Visar {{shown}} av {{total}}`},dragGhost:{multiCount:`{{count}} poster`,batch:`{{name}} ({{count}} kopia)`,batch_plural:`{{name}} ({{count}} kopior)`},sections:{currentlyPrinting:`Skriver ut nu`,queued:`I kö`,history:`Historik`},status:{pending:`Väntande`,waiting:`Väntar`,printing:`Skriver ut`,paused:`Pausad`,completed:`Slutförd`,failed:`Misslyckad`,skipped:`Hoppad över`,cancelled:`Avbruten`},summary:{printing:`Skriver ut`,queued:`I kö`,totalTime:`Total kötid`,totalWeight:`Total kövikt`,history:`Historik`},filter:{allPrinters:`Alla skrivare`,unassigned:`Otilldelad`,allStatus:`Alla statusar`,allLocations:`Alla platser`,any:`Valfri`},sort:{byPosition:`Sortera efter position`,byName:`Sortera efter namn`,byPrinter:`Sortera efter skrivare`,bySchedule:`Sortera efter schema`,byDate:`Sortera efter datum`,ascendingOldest:`Stigande (äldst först)`,descendingNewest:`Fallande (nyast först)`},badges:{staged:`Förberedd`,requiresPrevious:`Kräver tidigare framgång`,autoPowerOff:`Auto-avstängning`,gcodeInjection:`G-kod`},empty:{title:`Inga utskrifter schemalagda`,description:`Schemalägg en utskrift från Arkiv-sidan med hjälp av "Schemalägg"-alternativet i kontextmenyn, eller dra och släpp filer för att komma igång.`},time:{etaIfStartedNow:`Färdigställningstid om detta jobb startar nu`,whenFree:`När en skrivare är ledig`,overdue:`Försenad`,now:`Nu`,lessThanMinute:`Om mindre än en minut`,inMinutes:`Om {{count}} min`,inHours:`Om {{count}} timmar`},actions:{startPrint:`Starta utskrift`,stopPrint:`Stoppa utskrift`,requeue:`Lägg tillbaka i kö`},bulkEdit:{title:`Redigera {{count}} post`,title_plural:`Redigera {{count}} poster`,description:`Endast ändrade inställningar kommer att tillämpas på valda poster.`,printer:`Skrivare`,noChange:`— Ingen ändring —`,queueOptions:`Köalternativ`,staged:`Förberedd (manuell start)`,autoPowerOff:`Auto-avstängning efter utskrift`,requirePrevious:`Kräv tidigare framgång`,gcodeInjection:`Injicera G-kod`,printOptions:`Utskriftsalternativ`,bedLevelling:`Byggplattsnivåinställning`,flowCalibration:`Flödeskalibrering`,vibrationCalibration:`Vibrationskalibrering`,layerInspection:`Förstaskiktsinspektion`,timelapse:`Timelapse`,useAms:`Använd AMS`,nozzleOffsetCali:`Munstyckesoffsetskalibrering`,applyChanges:`Tillämpa ändringar`,selectAll:`Markera alla`,deselectAll:`Avmarkera alla`,selected:`{{count}} valda`,editSelected:`Redigera valda`,cancelSelected:`Avbryt valda`},confirm:{cancelTitle:`Avbryt schemalagd utskrift`,cancelMessage:`Är du säker på att du vill avbryta "{{name}}"?`,stopTitle:`Stoppa utskrift`,stopMessage:`Är du säker på att du vill stoppa den aktuella utskriften "{{name}}"? Detta kommer att avbryta utskriftsjobbet på skrivaren.`,removeTitle:`Ta bort från historik`,removeMessage:`Är du säker på att du vill ta bort "{{name}}" från köhistoriken?`,clearHistoryTitle:`Rensa historik`,clearHistoryMessage:`Är du säker på att du vill ta bort alla {{count}} poster från historiken?`,cancelButton:`Avbryt utskrift`,stopButton:`Stoppa utskrift`,thisPrint:`denna utskrift`,thisItem:`denna post`},toast:{cancelled:`Köpost avbruten`,cancelFailed:`Kunde inte avbryta post`,removed:`Köpost borttagen`,keptForOrder:`Avbruten istället för borttagen: detta är den enda körningen som dess batchorder kan återställa den här plattan från`,historyKeptForOrders:`Behöll {{kept}} som batchordrar fortfarande behöver.`,removeFailed:`Kunde inte ta bort post`,stopped:`Utskrift stoppad`,stopFailed:`Kunde inte stoppa utskrift`,released:`Utskrift släppt till kö`,startFailed:`Kunde inte starta utskrift`,reorderFailed:`Kunde inte ordna om kö`,historyCleared:`Rensade {{count}} historikpost(er)`,clearHistoryFailed:`Kunde inte rensa historik`,updateFailed:`Kunde inte uppdatera poster`,bulkCancelled:`Avbröt {{count}} post(er)`,bulkCancelFailed:`Kunde inte avbryta poster`,batchCreated:`Batch "{{name}}" skapad`,batchCreateFailed:`Kunde inte skapa batch`,batchUngrouped:`Avgrupperade {{count}} post(er)`,batchUngroupFailed:`Kunde inte avgruppera batch`,resumedAfterFailure:`Återupptog kö — {{restored}} jobb återställda till väntande`,resumeAfterFailureFailed:`Kunde inte återuppta kö`},resumeAfterFailure:{banner:`{{printer}} är blockerad av ett tidigare utskriftsfel — {{count}} jobb hoppades över`,bannerHint:`Åtgärda skrivarproblemet, sedan återuppta för att återställa de hoppade jobben och rensa blockeringen.`,button:`Återuppta efter fel`,confirmTitle:`Återuppta kö efter fel?`,confirmMessage:`Återställ {{count}} hoppade jobb på {{printer}} till väntande och rensa blockeringen för tidigare utskrift. Se till att skrivaren är redo innan du fortsätter.`},timeline:{listView:`Lista`,timelineView:`Tidslinje`,unassigned:`Otilldelad`,noData:`Inga schemalagda utskrifter för denna dag`,nothingCommitted:`Inga fastställda scheman i detta fönster. Förberedda poster, väntande poster och ASAP-jobb på inaktiva skrivare visas inte — ange en schemalagd tid eller släpp en förberedd post för att se den här.`,allDoneBy:`Alla utskrifter beräknas vara klara till {{time}}`,staged:`Förberedd`,filterAll:`Visa alla`,filterPrinting:`Skriver ut`,filterQueued:`I kö`,time:{anyMoment:`när som helst`,minutesLeft:`{{minutes}}m kvar`,hoursLeft:`{{hours}}h kvar`,hoursMinutesLeft:`{{hours}}h {{minutes}}m kvar`},day:{previous:`Föregående dag`,next:`Nästa dag`,today:`Idag`},window:{back12h:`Bakåt 12 timmar`,forward12h:`Framåt 12 timmar`,now:`Nu`},printerColumnHeader:`Skrivare`},permissions:{noStopPrint:`Du har inte behörighet att stoppa utskrifter`,noStartPrint:`Du har inte behörighet att starta utskrifter`,noEdit:`Du har inte behörighet att redigera denna köpost`,noCancel:`Du har inte behörighet att avbryta denna köpost`,noRequeue:`Du har inte behörighet att lägga tillbaka poster i kön`,noRemove:`Du har inte behörighet att ta bort denna köpost`,noClearHistory:`Du har inte behörighet att rensa all historik`,noEditItems:`Du har inte behörighet att redigera köposter`,noCancelItems:`Du har inte behörighet att avbryta köposter`}},stats:{title:`Statistik`,subtitle:`Dra widgetar för att omordna. Klicka på ögonikonen för att dölja.`,overview:`Översikt`,totalPrints:`Totala utskrifter`,successRate:`Framgångsgrad`,totalPrintTime:`Total utskriftstid`,printTime:`Utskriftstid`,totalFilament:`Totalt filament använt`,filamentUsed:`Filament använt`,filamentCost:`Filamentkostnad`,totalCost:`Total kostnad`,energyUsed:`Energi använt`,energyCost:`Energikostnad`,energyWarmingUpTooltip:`Energispårning samlar fortfarande in timvisa ögonblicksbilder. Datumintervallstotaler kommer att bli korrekta när åtminstone en ögonblicksbild existerar före det valda intervallet. Tidiga värden kan underskattas.`,averagePrintTime:`Genomsnittlig utskriftstid`,printsPerDay:`Utskrifter per dag`,byPrinter:`Efter skrivare`,printsByPrinter:`Utskrifter efter skrivare`,byMaterial:`Efter material`,byMonth:`Efter månad`,last7Days:`Senaste 7 dagarna`,last30Days:`Senaste 30 dagarna`,last90Days:`Senaste 90 dagarna`,allTime:`All tid`,quickStats:`Snabbstatistik`,printActivity:`Utskriftsaktivitet`,filamentTypes:`Filamenttyper`,filamentTrends:`Filamenttrender`,failureAnalysis:`Felanalys`,timeAccuracy:`Tidsnoggrannhet`,successful:`Lyckade:`,failed:`Misslyckade:`,cancelled:`Avbrutna:`,perfectEstimate:`100% = perfekt uppskattning`,noTimeAccuracyData:`Ingen tidsnoggrannhetsdata än`,noFilamentData:`Ingen filamentdata tillgänglig`,noPrinterData:`Ingen skrivardata tillgänglig`,noPrintData:`Ingen utskriftsdata tillgänglig`,noPrintDataLast30Days:`Ingen utskriftsdata de senaste 30 dagarna`,failureReasons:`Orsaker till fel`,topFailureReasons:`Vanligaste orsaker till fel`,failedPrintsCount:`{{failed}} / {{total}} utskrifter misslyckades`,lastWeekRate:`Förra veckan: {{rate}}%`,resetLayout:`Återställ layout`,recalculateCosts:`Omberäkna kostnader`,recalculateCostsHint:`Omberäkna alla arkivkostnader med nuvarande filamentpriser`,exportStats:`Exportera statistik`,exportAsCsv:`Exportera som CSV`,exportAsExcel:`Exportera som Excel`,hiddenCount:`{{count}} dolda`,exportDownloaded:`Export nedladdad`,exportFailed:`Kunde inte exportera`,layoutReset:`Layout återställd`,recalculatedCosts:`Omberäknade kostnader för {{count}} arkiv`,recalculateFailed:`Kunde inte omberäkna kostnader`,loadingStats:`Laddar statistik...`,noPermissionResetLayout:`Du har inte behörighet att återställa layout`,noPermissionRecalculate:`Du har inte behörighet att omberäkna kostnader`,noPrintDataInRange:`Ingen utskriftsdata i det valda intervallet`,periodFilament:`Periodens filament`,periodCost:`Periodens kostnad`,avgPerPrint:`Genomsnitt per utskrift`,usageOverTime:`Användning över tid`,energyOverTime:`Energi över tid`,filamentByWeight:`Vikt`,printDuration:`Utskriftsvaraktighet`,printerUtilization:`Skrivaranvändning`,filamentSuccess:`Framgång efter material`,printHabits:`Utskriftsvanor`,printTimeOfDay:`Utskriftstid på dagen`,colorDistribution:`Färgsfördelning`,noColorData:`Ingen färgdata tillgänglig`,records:`Rekord`,longestPrint:`Längsta utskrift`,heaviestPrint:`Tungsta utskrift`,mostExpensivePrint:`Dyraste utskrift`,busiestDay:`Mest aktiva dagen`,successStreak:`Framgångssvit`,streakPrint:`utskrift i rad`,streakPrints:`{{count}} utskrifter i rad`,printerStats:`Skrivarstatistik`,hours:`timmar`,avgPrints:`Genomsnittliga utskrifter`,noArchiveData:`Ingen utskriftsdata tillgänglig`,filamentByTime:`Tid`,avgWeight:`Genomsnittsvikt`,avgTime:`Genomsnittstid`,filamentByPrints:`Utskrifter`,timeframe:{today:`Idag`,"this-week":`Denna vecka`,"this-month":`Denna månad`,"last-7":`Senaste 7 dagarna`,"last-30":`Senaste 30 dagarna`,"last-90":`Senaste 90 dagarna`,"this-year":`Detta år`,"all-time":`All tid`,custom:`Anpassat intervall`,from:`Från`,to:`Till`},allUsers:`Alla användare`,noUser:`Ingen användare (System)`,filterByUser:`Filtrera efter användare`},maintenance:{title:`Underhåll`,overview:`Översikt`,allOk:`Allt underhåll är gjort`,dueCount:`{{count}} underhåll uteblivet`,dueCount_plural:`{{count}} underhåll uteblivna`,warningCount:`{{count}} varning`,warningCount_plural:`{{count}} varningar`,totalPrintTime:`Total utskriftstid`,nextMaintenance:`Nästa underhåll`,nothingDue:`Inget uteblivet`,tasks:`Uppgifter`,lastPerformed:`Senast utfört`,interval:`Intervall`,hoursRemaining:`{{hours}}h kvar`,hoursOverdue:`{{hours}}h försenat`,markDone:`Markera som klar`,performMaintenance:`Utför underhåll`,history:`Historik`,noHistory:`Ingen underhållshistorik`,editPrintHours:`Redigera utskriftstimmar`,currentHours:`Aktuella timmar`,statusTab:`Status`,settingsTab:`Inställningar`,overdueCount:`{{count}} försenade`,dueSoonCount:`{{count}} förfaller snart`,dueSoon:`Förfaller snart`,allGood:`Allt bra`,overdueBy:`Försenat med {{duration}}`,dueIn:`Förfaller om {{duration}}`,timeLeft:`{{duration}} kvar`,day:`1 dag`,days:`{{count}} dagar`,week:`1 vecka`,weeks:`{{count}} veckor`,month:`1 månad`,months:`{{count}} månader`,year:`1 år`,maintenanceTypes:`Underhållstyper`,maintenanceTypesDescription:`Systemtyper och dina anpassade underhållsuppgifter`,addCustomType:`Lägg till anpassad typ`,restoreDefaults:`Återställ standarduppgifter`,intervalType:`Intervalltyp`,intervalValue:`Intervall ({{type}})`,icon:`Ikon`,documentationLink:`Dokumentationslänk (valfritt)`,assignToPrinters:`Tilldela till skrivare`,selectAtLeastOnePrinter:`Välj minst en skrivare`,addType:`Lägg till typ`,custom:`Anpassad`,printHours:`Utskriftstimmar`,calendarDays:`Kalenderdagar`,exampleName:`t.ex. Byt HEPA-filter`,viewDocumentation:`Visa dokumentation`,timeBasedInterval:`Tidsbaserat intervall`,intervalOverrides:`Intervall-överskridningar`,intervalOverridesDescription:`Anpassa intervall för specifika skrivare`,assignedToPrinters:`Tilldelad till skrivare:`,noPrintersAssigned:`Inga skrivare tilldelade`,addPrinterShort:`Lägg till:`,printersAssignedClick:`{{count}} skrivare tilldelade – klicka för att hantera`,removeFromPrinter:`Ta bort från denna skrivare`,types:{lubricateCarbonRods:`Smörj karbonstänger`,lubricateRails:`Smörj linjära skenor`,cleanNozzle:`Rengör munstycke/värmeblock`,checkBelts:`Kontrollera remspänning`,cleanBuildPlate:`Rengör byggplatta`,checkExtruder:`Kontrollera extruderarkugghjul`,checkCooling:`Kontrollera kylfläktar`,generalInspection:`Allmän besiktning`,cleanCarbonRods:`Rengör karbonstänger`,lubricateSteelRods:`Smörj stålstänger`,cleanSteelRods:`Rengör stålstänger`,cleanLinearRails:`Rengör linjära skenor`,checkPtfeTube:`Kontrollera PTFE-rör`,replaceHepaFilter:`Byt HEPA-filter`,replaceCarbonFilter:`Byt kolfilter`,lubricateLeftNozzleRail:`Smörj vänster munstyckesskena`},maintenanceComplete:`Underhåll markerat som klart`,typeUpdated:`Underhållstyp uppdaterad`,typeDeleted:`Underhållstyp borttagen`,defaultsRestored:`Återställde {{count}} standarduppgift(er)`,printHoursUpdated:`Utskriftstimmar uppdaterade`,printerAssigned:`Skrivare tilldelad`,printerRemoved:`Skrivare borttagen`,deleteTypeConfirm:`Ta bort "{{name}}"?`,deleteSystemTypeTitle:`Ta bort standardunderhållsuppgift?`,deleteSystemTypeMessage:`Är du säker på att du vill ta bort standardunderhållsuppgift "{{name}}"?`,noPermissionUpdate:`Du har inte behörighet att uppdatera underhållsposter`,noPermissionPerform:`Du har inte behörighet att utföra underhåll`,noPermissionEditTypes:`Du har inte behörighet att redigera underhållstyper`,noPermissionDeleteTypes:`Du har inte behörighet att ta bort underhållstyper`,noPermissionEditHours:`Du har inte behörighet att redigera utskriftstimmar`,noPermissionRemovePrinter:`Du har inte behörighet att ta bort skrivartilldelningar`,noPermissionAssignPrinter:`Du har inte behörighet att tilldela skrivare`,noPermissionEditIntervals:`Du har inte behörighet att redigera intervall`,configureSettings:`Konfigurera underhållstyper och intervall`},settings:{sliceEngine:`Slicer-motor`,sliceEngineSidecar:`Server-sidecar`,sliceEngineSidecarHint:`Slicing körs på servern, i slicerns sidecar-container.`,sliceEngineBrowser:`I webbläsaren`,sliceEngineBrowserHint:`Slicing körs på denna enhet, utan server inblandad.`,title:`Inställningar`,general:`Allmänt`,tabs:{general:`Allmänt`,smartPlugs:`Smarta kontakter`,sensors:`Sensorer`,notifications:`Notiser`,queue:`Arbetsflöde`,queueDispatch:`Kö och utskick`,queuePipelines:`Pipelines`,filament:`Filament`,network:`Nätverk`,apiKeys:`API-nycklar`,virtualPrinter:`Virtuell skrivare`,spoolbuddy:`SpoolBuddy`,failureDetection:`Feldetektering`,users:`Autentisering`,backup:`Säkerhetskopia`,emailAuth:`E-postautentisering`,ldap:`LDAP`,twoFa:`Tvåfaktorsautentisering`,oidc:`SSO / OIDC`,security:`Säkerhet`},spoolbuddy:{infoTitle:`SpoolBuddy-enheter`,infoBody:`SpoolBuddy-kiosker registrerar sig automatiskt via hjärtklapp. Avregistrera en enhet här om den inte längre används eller om en gammal dubblett lämnats kvar av en krasch i demonen.`,duplicatesTitle:`{{count}} enheter registrerade`,duplicatesBody:`Endast den första registrerade enheten används av kiosk-gränssnittet. Om en av dessa är en gammal dubblett från en krasch, avregistrera den — en online-enhet kommer att registrera sig själv igen vid nästa hjärtklapp.`,empty:`Inga SpoolBuddy-enheter registrerade än.`,online:`Online`,offline:`Offline`,unregister:`Avregistrera`,unregisterSuccess:`Enhet avregistrerad`,unregisterError:`Kunde inte avregistrera enhet`,confirmTitle:`Avregistrera SpoolBuddy-enhet?`,confirmBody:`Detta kommer att ta bort "{{hostname}}" ({{deviceId}}) från databasen. Om enheten är online kommer den att registrera sig själv igen vid nästa hjärtklapp.`,ipAddress:`IP-adress`,firmware:`Firmware`,lastSeen:`Senast sedd`,daemonUptime:`Demonens upptid`,systemUptime:`Systemets upptid`,never:`aldrig`,nfc:`NFC`,scale:`Skala`,cpuTemp:`CPU-temperatur`,cpuLoad:`CPU-belastning`,memory:`Minne`,disk:`Disk`,update:`Uppdatera`,updateConfirmTitle:`Uppdatera SpoolBuddy-demon?`,updateConfirmBody:`Trigga en programuppdatering på "{{hostname}}"? Demonen kommer att starta om när uppdateringen är klar.`,restartBrowser:`Starta om webbläsaren`,restartBrowserConfirmTitle:`Starta om kiosk-webbläsaren?`,restartBrowserConfirmBody:`Starta om kiosk-webbläsaren på "{{hostname}}"? Skärmen kommer att vara tom en kort stund.`,restartDaemon:`Starta om demonen`,restartDaemonConfirmTitle:`Starta om SpoolBuddy-demonen?`,restartDaemonConfirmBody:`Starta om SpoolBuddy-demonen på "{{hostname}}"? Enheten kommer att vara offline i några sekunder.`,reboot:`Starta om`,rebootConfirmTitle:`Starta om enheten?`,rebootConfirmBody:`Starta om "{{hostname}}"? Enheten kommer att vara offline i cirka en minut.`,shutdown:`Stäng av`,shutdownConfirmTitle:`Stäng av enhet?`,shutdownConfirmBody:`Stäng av "{{hostname}}"? Du kommer att behöva fysisk åtkomst för att starta den igen.`,commandConfirm:`Bekräfta`,commandQueued:`Kommando köat`,commandError:`Kunde inte skicka kommando`},ldap:{title:`LDAP-autentisering`,enabledDesc:`LDAP-autentisering är aktiverat`,disabledDesc:`LDAP-autentisering är inaktiverat`,disabledHint:`Konfigurera och spara LDAP-inställningar nedan, aktivera sedan.`,enabled:`LDAP-autentisering aktiverad`,disabled:`LDAP-autentisering inaktiverad`,feature1:`Användare kan logga in med LDAP-uppgifter`,feature2:`Lokalt admin-konto kvarstår som reserv`,feature3:`LDAP-grupper mappas till Bambuddy-grupper vid inloggning`,serverConfig:`LDAP-serverkonfiguration`,serverUrl:`Server-URL`,serverUrlHint:`Använd ldaps:// för SSL eller ldap:// med StartTLS`,security:`Säkerhet`,securityHint:`StartTLS uppgraderar en vanlig anslutning till TLS. LDAPS använder TLS från början.`,bindDn:`Bind DN (Service-konto)`,bindPassword:`Bind-lösenord`,searchBase:`Sök bas-DN`,userFilter:`Användarsökfilter`,userFilterHint:`{username} ersätts med inloggningsanvändarnamnet. Använd (uid={username}) för OpenLDAP.`,advanced:`Avancerat`,autoProvision:`Auto-provisionera användare`,autoProvisionHint:`Skapa automatiskt ett Bambuddy-konto vid första LDAP-inloggning`,defaultGroup:`Standardgrupp`,defaultGroupNone:`— Ingen (ingen reserv) —`,defaultGroupHint:`Reservgrupp som tilldelas när en LDAP-användare autentiseras men inte finns i någon mappad LDAP-grupp. Lämna tomt för att lämna omappade användare utan behörigheter.`,groupMapping:`Gruppmappning (JSON)`,groupMappingHint:`Mappa LDAP-grupp-DN till Bambuddy-grupper. Tillgängliga grupper: `,testConnection:`Testa anslutning`,settingsSaved:`LDAP-inställningar sparade`,errors:{serverRequired:`LDAP-server-URL krävs`,searchBaseRequired:`Sök bas-DN krävs`,enableAuthFirst:`Aktivera autentisering först`,configureLdapFirst:`Spara LDAP-inställningar först`}},email:{smtpSettings:`SMTP-konfiguration`,smtpHost:`SMTP-server`,smtpPort:`SMTP-port`,security:`Säkerhet`,authentication:`Autentisering`,username:`Användarnamn`,password:`Lösenord`,fromEmail:`Från e-post`,fromName:`Från namn`,testConnection:`Testa SMTP-anslutning`,testRecipient:`Testmottagare e-post`,sendTest:`Skicka test-e-post`,sending:`Skickar...`,save:`Spara inställningar`,saving:`Sparar...`,advancedAuth:`Avancerad autentisering`,advancedAuthEnabled:`Avancerad autentisering är aktiverad`,advancedAuthEnabledDesc:`E-postbaserade användarhanteringsfunktioner är aktiva. Nya användare kommer att få autogenererade lösenord via e-post, och användare kan återställa sina lösenord via "Glömt lösenord"-funktionen.`,advancedAuthDisabled:`Avancerad autentisering är inaktiverad`,advancedAuthDisabledDesc:`Aktivera avancerad autentisering för att aktivera e-postbaserade funktioner för användarhantering.`,enable:`Aktivera`,disable:`Inaktivera`,feature1:`Lösenord genereras automatiskt och skickas via e-post till nya användare`,feature2:`Användare kan logga in med användarnamn eller e-post`,feature3:`"Glömt lösenord"-funktionen är tillgänglig`,feature4:`Admin kan återställa användarlösenord via e-post`,errors:{requiredFields:`Fyll i alla obligatoriska fält`,usernameRequired:`Användarnamn krävs när autentisering är aktiverad`,enterTestEmail:`Ange en test-e-postadress`,smtpServerAndEmail:`Fyll i SMTP-server och Från e-post innan du testar`,usernamePasswordRequired:`Användarnamn och lösenord krävs när autentisering är aktiverat`,configureSmtpFirst:`Konfigurera och testa SMTP-inställningar först`,enableAuthFirst:`Aktivera autentisering först för att använda e-postbaserade funktioner.`},success:{settingsSaved:`SMTP-inställningar sparade`},securityOptions:{starttls:`STARTTLS (Port 587)`,ssl:`SSL/TLS (Port 465)`,none:`Ingen (Port 25)`},authOptions:{enabled:`Aktiverad`,disabled:`Inaktiverad`}},appearance:`Utseende`,notifications:`Notiser`,smartPlugs:`Smarta kontakter`,spoolman:`Spoolman`,updates:`Uppdateringar`,language:`Språk`,languageDescription:`Välj ditt föredragna språk`,theme:`Tema`,themeLight:`Ljust`,themeDark:`Mörkt`,themeSystem:`System`,defaultView:`Standardvy`,defaultViewDescription:`Sida att visa när appen öppnas`,checkForUpdates:`Sök efter uppdateringar`,autoUpdate:`Auto-uppdatering`,currentVersion:`Aktuell version`,latestVersion:`Senaste version`,upToDate:`Du har den senaste versionen`,updateAvailable:`Uppdatering tillgänglig`,notificationLanguage:`Notisspråk`,notificationLanguageDescription:`Språk för push-notiser`,bedCooledThreshold:`Tröskelvärde för sval byggplatta`,bedCooledThresholdDescription:`Temperatur under vilken byggplattan anses sval efter en utskrift`,userNotificationsEnabled:`Användarnotiser`,userNotificationsEnabledDescription:`Aktivera menyn för användarnotiser och e-postnotiser för utskriftshändelser. Kräver avancerad autentisering.`,userNotificationsDisabledHint:`Aktivera avancerad autentisering för att använda användarnotiser.`,notificationProviders:`Notisleverantörer`,addProvider:`Lägg till leverantör`,editProvider:`Redigera leverantör`,providerType:`Leverantörstyp`,testNotification:`Testnotis`,testSuccess:`Testnotis skickad`,testFailed:`Kunde inte skicka testnotis`,quietHours:`Tysta timmar`,quietHoursDescription:`Stör ej under dessa timmar`,quietHoursStart:`Start`,quietHoursEnd:`Slut`,events:{title:`Notishändelser`,printStart:`Utskrift startad`,printComplete:`Utskrift slutförd`,printFailed:`Utskrift misslyckades`,printStopped:`Utskrift stoppad`,printProgress:`Förloppsmilstolpar`,printProgressDescription:`Notis vid 25%, 50%, 75%`,printerOffline:`Skrivare offline`,printerError:`Skrivarfel`,filamentLow:`Lågt filament`,maintenanceDue:`Underhåll behövs`,maintenanceDueDescription:`Notis när underhåll behövs`},smartPlug:{title:`Smarta kontakter`,add:`Lägg till smart kontakt`,edit:`Redigera smart kontakt`,name:`Namn`,ipAddress:`IP-adress`,linkedPrinter:`Länkad skrivare`,autoOn:`Auto ström på`,autoOnDescription:`Sätt på när utskrift startar`,autoOff:`Auto ström av`,autoOffDescription:`Stäng av efter att utskrift slutförts`,offDelay:`Avstängningsfördröjning`,offDelayMinutes:`Minuter efter utskrift`,offDelayTemp:`När munstycket är under temperatur`,currentState:`Aktuell status`,turnOn:`Sätt på`,turnOff:`Stäng av`},filamentTracking:`Filamentspårning`,filamentTrackingDesc:`Välj hur du vill spåra dina filamentrullar. Du kan använda det inbyggda inventariet eller ansluta till en extern Spoolman-server.`,autoAddUnknownRfid:`Lägg automatiskt till okända RFID-rullar`,autoAddUnknownRfidDesc:`Skapa automatiskt en inventariepost när en rulle med en okänd RFID-tagg upptäcks. Stäng av om du förregistrerar nya rullar manuellt för att undvika dubbletter.`,filamentChecks:`Filamentkontroller`,disableFilamentWarnings:`Inaktivera filamentvarningar`,disableFilamentWarningsDesc:`Visa inte varningar om otillräckligt filament vid utskrift eller kö`,preferLowestFilament:`Föredra rulle med minst filament kvar`,preferLowestFilamentDesc:`När flera rullar matchar, använd den med minst filament kvar`,preferLowestFilamentBackupNote:`Gäller endast när AMS filamentbackup är aktiverat på skrivaren — annars kan skrivaren inte byta till en andra rulle när den valda tar slut.`,trackingModeBuiltIn:`Inbyggd inventering`,trackingModeBuiltInDesc:`RFID-auto-matchning och användningsspårning inkluderad`,trackingModeSpoolmanDesc:`Extern filamenthanteringsserver`,builtInFeatureRfid:`Upptäcker automatiskt Bambu Lab RFID-rullar i AMS`,builtInFeatureUsage:`Spårar filamentförbrukning per utskrift`,builtInFeatureCatalog:`Hantera rullar, färger och K-faktorprofiler`,builtInFeatureThirdParty:`Tredjepartsrullar kan tilldelas till inventeringsrullar`,amsSyncButton:`Synkronisera vikter från AMS`,amsSyncTitle:`Synkronisera rullvikter från AMS`,amsSyncMessage:`Detta kommer att skriva över alla rullar i inventariet med vikter från de aktuella AMS-procentvärdena från anslutna skrivare. Använd detta för att återställa från korrupt viktdata. Skrivaren måste vara online.`,amsSyncing:`Synkroniserar...`,amsSyncSuccess:`{{synced}} rulle(ar) synkroniserade, {{skipped}} hoppades över`,amsSyncError:`Kunde inte synkronisera vikter från AMS`,spoolmanAmsSyncButton:`Synkronisera Spoolman-vikter från AMS`,spoolmanAmsSyncTitle:`Synkronisera Spoolman-rullvikter från AMS`,spoolmanAmsSyncMessage:`Detta kommer att uppdatera alla Spoolman-rullars vikter baserat på de aktuella AMS-procentvärdena från anslutna skrivare. Skrivaren måste vara online.`,spoolmanAmsSyncing:`Synkroniserar...`,spoolmanAmsSyncSuccess:`{{synced}} rulle(ar) synkroniserade, {{skipped}} hoppades över`,spoolmanAmsSyncError:`Kunde inte synkronisera Spoolman-vikter från AMS`,spoolmanAmsSyncErrorUnreachable:`Kunde inte synkronisera Spoolman-vikter (Spoolman otillgänglig)`,spoolmanAmsSyncErrorNotConfigured:`Kunde inte synkronisera Spoolman-vikter (Spoolman ej konfigurerad)`,spoolmanNotConfigured:`Spoolman ej konfigurerad`,spoolmanFilamentCatalogTitle:`Spoolman filamentkatalog`,spoolmanFilamentCatalogDesc:`Filamentnamn och taravikter från din Spoolman-instans. Namn och rullvikt kan redigeras här; alla andra egenskaper hanteras direkt i Spoolman.`,spoolmanUrl:`Spoolman-URL`,spoolmanUrlHint:`URL till din Spoolman-server (t.ex. http://localhost:7912)`,spoolmanConnected:`Ansluten`,spoolmanDisconnected:`Frånkopplad`,status:`Status`,connect:`Anslut`,disconnect:`Koppla från`,howSyncWorks:`Hur synkronisering fungerar`,syncInfoRfidOnly:`Endast officiella Bambu Lab-rullar med RFID synkroniseras`,syncInfoAutoCreate:`Nya rullar skapas automatiskt i Spoolman vid första synkronisering`,syncInfoThirdPartySkipped:`Icke-Bambu Lab-rullar (tredjepart, påfyllda) hoppas över`,linkingExistingSpools:`Länka befintliga rullar`,linkingExistingSpoolsDesc:`För att länka befintliga Spoolman-rullar till din AMS, håll musen över ett AMS-fack och klicka på "Länka till Spoolman".`,syncMode:`Synkroniseringsläge`,syncModeAuto:`Automatisk`,syncModeManual:`Endast manuell`,syncModeAutoDesc:`AMS-data synkroniseras automatiskt när ändringar upptäcks`,syncModeManualDesc:`Synkroniserar endast vid manuell aktivering`,syncAmsData:`Synkronisera AMS-data`,syncAmsDataDesc:`Synkronisera skrivarens AMS-data till Spoolman manuellt`,allPrinters:`Alla skrivare`,noDefaultPrinter:`Ingen standard (fråga varje gång)`,sidebarOrder:`Sidofältsordning`,saveThumbnails:`Spara minibilder`,captureFinishPhoto:`Ta färdig-foto`,noPrintersConfigured:`Inga skrivare konfigurerade`,archiveMode:{always:`Skapa alltid arkivpost`,never:`Skapa aldrig arkivpost`,ask:`Fråga varje gång`},checkForUpdatesLabel:`Sök efter uppdateringar`,checkPrinterFirmware:`Kontrollera skrivarens firmware`,includeBetaUpdates:`Inkludera betaversioner`,includeBetaUpdatesDesc:`Notis om betaversioner och förhandsversioner vid sökning av uppdateringar`,localLogin:{disable:`Inaktivera lokal användarnamn/lösenordsinloggning`,disableHint:`När aktiverat kan endast SSO-leverantörer logga in. LDAP påverkas inte. Sätt BAMBUDDY_LOCAL_LOGIN=true på servern för att behålla en återställningsväg.`},enableRetry:`Aktivera försök igen`,homeAssistantDescription:`Kontrollera smarta kontakter via Home Assistant`,environmentManagedLabel:`(Hanterad av miljövariabler)`,autoEnabledViaEnv:`Automatiskt aktiverad via miljövariabler`,urlFromEnvReadOnly:`Värde inställt av HA_URL-miljövariabel (skrivskyddad)`,tokenFromEnvReadOnly:`Värde inställt av HA_TOKEN-miljövariabel (skrivskyddad)`,mqttConnectedTo:`Ansluten till`,prometheusDescription:`Exponera skrivardata i Prometheus-format`,noSmartPlugsTitle:`Inga smarta kontakter konfigurerade`,noSmartPlugsDescription:`Lägg till en Tasmota-baserad smart kontakt för att spåra energiförbrukning och automatisera strömkontroll.`,noProvidersTitle:`Inga leverantörer konfigurerade`,noProvidersDescription:`Lägg till en leverantör för att ta emot aviseringar.`,noTemplatesAvailable:`Inga mallar tillgängliga. Starta om backend för att ladda standardmallar.`,apiPermissionView:`Visa skrivarstatus och kö`,apiPermissionEdit:`Lägg till och ta bort poster från utskriftskö`,apiKeysEmptyTitle:`Inga API-nycklar`,apiKeysEmptyDescription:`Skapa en API-nyckel för att integrera med externa tjänster.`,noUsersFound:`Inga användare hittade`,noGroupsFound:`Inga grupper hittade`,noGroupsAvailable:`Inga grupper tillgängliga`,passwordsDoNotMatch:`Lösenorden matchar ej`,systemGroupWarning:`Systemgruppnamn kan inte ändras`,authDisabledTitle:`Autentisering är inaktiverat`,authDisabledFeature1:`Kräv inloggning för att komma åt systemet`,authDisabledFeature2:`Skapa flera användare med gruppbaserade behörigheter`,authDisabledFeature3:`Kontrollera åtkomst med 50+ detaljerade behörigheter`,userHasCreated:`Denna användare har skapat:`,userItemsQuestion:`Vad vill du göra med dessa objekt?`,deleteUserConfirm:`Är du säker på att du vill ta bort denna användare?`,actionCannotBeUndone:`Denna åtgärd kan inte ångras.`,addFirstSmartPlug:`Lägg till din första smarta kontakt`,providers:`Leverantörer`,log:`Logg`,testAll:`Testa alla`,testResults:`Testresultat`,testPassedCount:`{{count}} godkända`,testFailedCount:`{{count}} misslyckade`,messageTemplates:`Meddelandemallar`,messageTemplatesDescription:`Anpassa notismeddelanden för varje händelse.`,apiKeys:`API-nycklar`,apiKeysDescription:`Skapa API-nycklar för externa integrationer och webhooks.`,createKey:`Skapa nyckel`,apiKeyCreated:`API-nyckel skapad`,apiKeyCopyWarning:`Kopiera denna nyckel nu – den kommer inte att visas igen!`,useInApiBrowser:`Använd i API-läsaren`,apiKeyQrButton:`QR-kod`,apiKeyQrTitle:`Skanna för att konfigurera`,apiKeyQrCaption:`Skanna med din mobilapp för att lägga till denna server och API-nyckel.`,apiKeyQrWarning:`Innehåller din hemliga API-nyckel — dela inte eller ta skärmdump där andra kan se den.`,createNewApiKey:`Skapa ny API-nyckel`,keyName:`Nyckelnamn`,keyNamePlaceholder:`t.ex. Home Assistant, OctoPrint`,readStatus:`Läs status`,readStatusDescription:`Visa skrivarstatus och kö`,manageQueue:`Hantera kö`,manageQueueDescription:`Lägg till och ta bort poster från utskriftskö`,controlPrinter:`Kontrollera skrivare`,controlPrinterDescription:`Pausa, fortsätt och stoppa utskrifter`,manageLibrary:`Hantera bibliotek`,manageLibraryDescription:`Ladda upp, döp om och ta bort biblioteksfiler; importera modeller från MakerWorld`,manageInventory:`Hantera inventarier`,manageInventoryDescription:`Skapa, uppdatera och ta bort rullar och inventeringsposter. Krävs för SpoolBuddy-kiosker (NFC-skanning, vågläsningar, kiosksystemkommandon).`,manageMaintenance:`Hantera underhåll`,manageMaintenanceDescription:`Logga slutfört underhåll, återställ räknare, redigera intervall och hantera underhållstypkatalogen. Lämplig för Home Assistant-automatiseringar som registrerar "Jag rengjorde munstycket" utan att ge bredare skrivarkontroll.`,manageArchives:`Hantera arkiv`,manageArchivesDescription:`Redigera och ta bort utskriftsarkiv, inklusive borttagning av gamla utskrifter. Inkluderar inte borttagning av deras statistikbidrag. Lämplig för automatiseringar som rensar utskriftshistoriken.`,manageProjects:`Hantera projekt`,manageProjectsDescription:`Skapa, uppdatera och ta bort projekt, samt lägg till arkiv i dem. Lämplig för automatiseringar som organiserar utskrifter i projekt.`,libraryBadge:`Bibliotek`,inventoryBadge:`Inventarium`,maintenanceBadge:`Underhåll`,archivesBadge:`Arkiv`,projectsBadge:`Projekt`,cloudAccess:`Tillåt molnåtkomst`,cloudAccessDescription:`Läs Bambu Cloud-inställningar och filament å dina vägnar. Kräver att du är inloggad på Bambu Cloud.`,cloudBadge:`Moln`,updateEnergyCost:`Uppdatera elpris`,updateEnergyCostDescription:`Tillåt denna nyckel att POST:a ett nytt pris per kWh till /settings/electricity-price. Användbart för Home Assistants dynamiska tariffautomatiseringar (Tibber, Octopus, etc.). Detta är det enda inställningsfält som kan skrivas via API-nyckel.`,energyCostBadge:`Energi`,legacyKey:`Äldre nyckel`,legacyKeyTooltip:`Skapad före användarägande; skapa igen för att använda molnåtkomst`,unnamedKey:`Namnlös nyckel`,lastUsed:`Senast använd`,read:`Läs`,control:`Kontroll`,createFirstKey:`Skapa din första nyckel`,webhookEndpoints:`Webhook-ändpunkter`,webhookApiKeyHint:`Använd din API-nyckel i adressinformationen för X-API-Key.`,webhook:{getAllStatus:`Hämta alla skrivarstatusar`,getSpecificStatus:`Hämta specifik skrivarstatus`,addToQueue:`Lägg till i utskriftskö`,pausePrint:`Pausa utskrift`,resumePrint:`Fortsätt utskrift`,stopPrint:`Stoppa utskrift`},apiBrowser:`API-läsare`,apiBrowserDescription:`Utforska och testa alla tillgängliga API-ändpunkter.`,apiKeyForTesting:`API-nyckel för testning`,apiKeyPlaceholder:`Klistra in din API-nyckel här för att testa autentiserade ändpunkter...`,apiKeyHint:`Denna nyckel kommer att skickas som X-API-Key-adressinformation med förfrågningarna.`,deleteApiKeyTitle:`Ta bort API-nyckel`,deleteApiKeyMessage:`Är du säker på att du vill ta bort denna API-nyckel? Alla integrationer som använder denna nyckel kommer att sluta fungera.`,deleteKey:`Ta bort nyckel`,amsDisplayThresholds:`AMS-visningströskelvärden`,amsThresholdsDescription:`Konfigurera färgernas tröskelvärden för AMS:ens luftfuktighets- och temperaturindikatorer.`,humidity:`Luftfuktighet`,goodGreen:`God (grön)`,fairOrange:`Godkänd (orange)`,aboveFairBad:`Över godkänt tröskelvärde visas som röd (dålig)`,fairAlsoDryingThreshold:`Detta tröskelvärde används också för att trigga auto-torkning när det är aktiverat`,fairBelowDryingFloor:`Auto-torkning kan inte nå detta värde: en AMS läser {{floor}}% eller mer medan dess värmare körs, så varje cykel skulle sluta och starta om omedelbart. Höj den över {{floor}}% om auto-torkning är på.`,temperature:`Temperatur`,goodBlue:`God (blå)`,aboveFairHot:`Över godkänt tröskelvärde visas som röd (varm)`,tempAlarmThreshold:`Larma över`,tempAlarmSeparateFromBand:`Endast larmtröskeln skickar meddelanden — God och Godkänd färgar displayen. Lämna den tom för att larma vid Godkänd-tröskeln, som tidigare.`,tempAlarmMustBePositive:`Ett tröskelvärde på 0 eller lägre ignoreras — larmet faller tillbaka till Godkänd-tröskelvärdet.`,historyRetention:`Bevarande av historik`,keepSensorHistory:`Bevara sensordata för`,historyRetentionDescription:`Äldre luftfuktighets- och temperaturdata kommer att tas bort automatiskt`,defaultPrintOptions:`Standardutskriftsalternativ`,defaultPrintOptionsDescription:`Sätt standardvärden för utskriftsalternativ när nya utskrifter startas. Dessa kan åsidosättas per utskrift i utskriftsdialogrutan.`,defaultBedLevelling:`Byggplattsnivåinställning`,defaultBedLevellingDesc:`Ställer in byggplattan automatiskt före utskrift`,defaultFlowCali:`Flödeskalibrering`,defaultFlowCaliDesc:`Kalibrera extruderingsflöde`,defaultVibrationCali:`Vibrationskalibrering`,defaultVibrationCaliDesc:`Minska ringningsartefakter`,defaultLayerInspect:`Förstaskiktsinspektion`,defaultLayerInspectDesc:`AI-inspektion av första skiktet`,defaultTimelapse:`Timelapse`,defaultTimelapseDesc:`Spela in timelapse-video`,defaultNozzleOffsetCali:`Munstyckesoffsetkalibrering`,defaultNozzleOffsetCaliDesc:`Kalibrera munstyckesoffsetar mellan extruderare`,tempFanPresetsTitle:`Temperatur- och fläktförinställningar`,tempFanPresetsDescription:`Anpassa snabbvalsvärden som visas i skrivarkortets temperatur- och fläkthastighets-popovers. Av-knappen visas alltid.`,tempFanPresetsNozzle:`Munstyckstemperatur`,tempFanPresetsBed:`Byggplattstemperatur`,tempFanPresetsChamber:`Kammartemperatur`,tempFanPresetsFan:`Fläkthastighet`,tempFanPresetsReset:`Återställ till standard`,concurrentUploadsTitle:`Samtidiga uppladdningar`,concurrentUploadsDescription:`Hur många skrivare kön kan skicka filer till samtidigt. Skrivare tar emot filer långsamt (en stor utskrift kan ta flera minuter), och varje skrivare väntar på sin tur — så med en större flotta är det detta som förhindrar att den sista skrivaren i en batch väntar på alla överföringar före den. Sänk detta om ditt nätverk eller din Bambuddy-värd har svårt med parallella överföringar.`,concurrentUploadsLabel:`Skrivare som laddas upp till samtidigt`,concurrentUploadsHelp:`1 skickar till en skrivare i taget (gammalt beteende). Standard är 4.`,staggeredStart:`Förskjuten start`,staggeredStartDescription:`Standardgruppstorlek och intervall vid förskjuten start av batchutskrifter på flera skrivare. Kan åsidosättas per batch i utskriftsdialogrutan.`,preheatTitle:`Förvärme`,preheatDescription:`Värm byggplattan (och kammaren, om stödjes) och håll temperaturen före varje köad utskrift startar. Användbart för tekniska filament (PA, ABS) på skrivare utan aktiv kammarvärmare — byggplattan värmer kammaren med värmestrålning medan varmhållningstimern går. Måltemperaturen för byggplattan läses från utskriftsfilen; kammarbeteendet beror på skrivarmodell.`,preheatEnabled:`Aktivera förvärme och varmhållning`,preheatEnabledDesc:`När avstängt skickas köade utskrifter omedelbart. Varje köpost kan åsidosättas per utskrift.`,preheatFilamentTargetsLabel:`Kammarmål per filamenttyp (°C)`,preheatFilamentTargetsHint:`Bambuddy väljer det högsta målet bland de laddade AMS-facken; utskrifter med endast PLA får värdet 0 och hoppar automatiskt över kammarfasen.`,preheatFilamentTargetsReset:`Återställ till standard`,preheatFilamentTargetsDefaultRow:`Övrigt / omappat`,preheatMaxWait:`Max väntetid (sekunder)`,preheatMaxWaitHelp:`Begränsning för kammaruppvärmningsfasen innan den hoppar över.`,preheatSoak:`Varmhållning (sekunder)`,preheatSoakHelp:`Hålltid efter att måltemperaturen nåtts eller max-väntetiden passerat.`,preheatHardwareTitle:`Handlingssätt per skrivare:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E värmer kammaren aktivt via M141. X1C/P2S läser kammartemperatur men förlitar sig på byggplattans byggplattsvärme. P1S/P1P/A1/A1 Mini har ingen kammarsensor — endast varmhållningstimern gäller.`,preheatPerItemDesc:`Värm byggplattan och kammaren före denna utskrift startar. Standard är den globala inställningen Inställningar → Arbetsflöde.`,preheatOverride_inherit:`Ärv`,preheatOverride_on:`På`,preheatOverride_off:`Av`,calibrationMode_off:`Av`,calibrationMode_on:`På`,calibrationMode_auto:`Auto`,preheatTargetOverride:`Kammartemperatur-åsidosättning (°C, tom = standard för filamentet)`,preheatTargetOverrideHelp:`0 värmer plattan och kör uppvärmningen utan kammaren. Lämna tomt och en utskrift utan kammarkrav hoppar över förvärmningen helt.`,plateClear:`Bekräftelse för tömd platta`,requirePlateClear:`Kräv bekräftelse för tömd platta`,requirePlateClearDescription:`När aktiverat väntar schemaläggaren på bekräftelse för tömd platta per skrivare innan köade utskrifter startar på skrivare med slutförda jobb. Om detta inaktiveras döljs också plattstatusbadgen och knappen "Markera platta som tömd" på skrivarkorten.`,keepBedWarm:`Håll plattan varm mellan utskrifterna`,keepBedWarmDesc:`Tills plattan är tömd, håll plattan vid varmhållningstemperaturen nedan så att kammaren förblir varm - eller vid nästa utskrifts egen plattemperatur om den är högre. Gäller endast när nästa utskrift behöver kammarvärme (ASA, ABS, PA, PC etc.). Kräver en bekräftelse på tömd platta för att vara aktiverad.`,keepWarmBedTemp:`Varmhållningstemperatur för platta (°C)`,keepWarmBedTempHelp:`Används när plattans uppgift är att värma upp kammaren — hålla värmen och förvärma när utskriftsfilen inte har någon plattemperatur. En högre plattemperatur från utskriftsfilen vinner alltid.`,keepWarmMaxMinutes:`Sluta hålla värmen efter (minuter)`,keepWarmMaxMinutesHelp:`Om plattan inte töms inom denna tid, stängs värmarna av istället för att hållas på obestämd tid.`,gcodeInjection:`G-kodinjicering`,gcodeInjectionDescription:`Konfigurera anpassad G-kod för att injiceras i början och/eller slutet av utskrifter för auto-utskriftssystem som Farmloop, SwapMod, AutoClear och Printflow 3D. Kodsnuttar konfigureras per skrivarmodell och tillämpas när "Injicera G-kod" är aktiverat på en köpost.`,gcodeInjectionNoPrinters:`Inga skrivare hittade. Lägg till skrivare för att konfigurera G-kod-snuttar.`,gcodeStartLabel:`Start-G-kod`,gcodeEndLabel:`Slut-G-kod`,gcodeStartPlaceholder:`G-kod som läggs till före utskriftens start...`,gcodeEndPlaceholder:`G-kod som läggs till efter utskriftens slut...`,staggerGroupSize:`Gruppstorlek`,staggerGroupSizeHelp:`Skrivare som startar samtidigt per grupp`,staggerInterval:`Intervall (minuter)`,staggerIntervalHelp:`Fördröjning mellan varje grupps start`,queueDrying:`Köa auto-torkning`,queueDryingDescription:`Torka AMS-filament automatiskt när skrivaren är inaktiv mellan köade utskrifter. Använder tröskelvärdet för luftfuktighet ovan för att trigga torkning.`,queueDryingEnabled:`Aktivera auto-torkning`,queueDryingEnabledDescription:`Starta AMS-torkning automatiskt när skrivaren är inaktiv och luftfuktigheten är över tröskelvärdet`,queueDryingBlock:`Vänta på att torkning slutförts`,queueDryingBlockDescription:`Blockera utskriftskön tills torkningen är klar. När avstängt prioriteras utskrifter över torkning.`,ambientDryingEnabled:`Bakgrundstorkning`,ambientDryingEnabledDescription:`Torka filament automatiskt på inaktiva skrivare när luftfuktigheten överskrider tröskelvärdet, även utan köade utskrifter.`,printDryingEnabled:`Fortsätt torka under utskrift`,printDryingEnabledDescription:`Tillåt auto-torkning att fortsätta köra under en utskrift på hårdvara som stödjer det (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L med senaste firmware). Torkningstemperaturen begränsas automatiskt till 5°C under idle-förinställningen för att skydda rullar.`,dryingPresets:`Torkningsförinställningar`,dryingPresetsDescription:`Temperatur och varaktighet per filamenttyp. AMS 2 Pro använder lägre temperaturer, AMS-HT stöder högre temperaturer.`,dryingFilament:`Filament`,humidityThresholds:`Tröskelvärden för luftfuktighet`,humidityThresholdsDescription:`Luftfuktighetsutlösare per filament för auto-torkning och larm. Blandade laddningar i en AMS använder det lägsta tröskelvärdet.`,humidityThresholdCol:`Tröskelvärde`,humidityThresholdDefault:`Standard (okända typer)`,printModal:`Utskriftsdialogruta`,expandCustomMapping:`Expandera anpassad mappning som standard`,expandCustomMappingDescription:`När utskrift skickas till flera skrivare, visa utökad AMS-mappning per skrivare`,authentication:`Autentisering`,authEnabledDescription:`Din instans är skyddad med användarautentisering`,authDisabledDescription:`Aktivera för att kräva inloggning och hantera användaråtkomst`,authDisabledMessage:`Aktivera autentisering för att skapa användarkonton, hantera behörigheter och skydda din Bambuddy-instans.`,enableAuthentication:`Aktivera autentisering`,currentUser:`Aktuell användare`,changePassword:`Ändra lösenord`,admin:`Admin`,users:`Användare`,addUser:`Lägg till användare`,groups:`Grupper`,addGroup:`Lägg till grupp`,system:`System`,noDescription:`Ingen beskrivning`,userCount:`{{count}} användare`,permissionCount:`{{count}} behörigheter`,createUser:`Skapa användare`,username:`Användarnamn`,enterUsername:`Ange användarnamn`,password:`Lösenord`,enterPassword:`Ange lösenord`,passwordRequirements:`Minst 8 tecken, med en versal, en gemen, en siffra och ett specialtecken.`,confirmPassword:`Bekräfta lösenord`,confirmPasswordPlaceholder:`Bekräfta lösenord`,viewReleaseOnGitHub:`Visa release på GitHub`,turnAllPlugsOn:`Sätt på alla kontakter`,turnAllPlugsOff:`Stäng av alla kontakter`,clearNotificationLogs:`Rensa notisloggar`,clearLogsMessage:`Detta kommer permanent ta bort alla notisloggar äldre än 30 dagar. Denna åtgärd kan inte ångras.`,clearLogs:`Rensa loggar`,resetUiPreferences:`Återställ UI-inställningar`,resetUiPreferencesMessage:`Detta kommer återställa alla UI-inställningar till standard: sidofältsordning, tema, instrumentpanelslayout, visningslägen och sorteringsinställningar. Dina skrivare, arkiv och serverinställningar kommer INTE att påverkas. Sidan kommer att laddas om efter rensning.`,resetPreferences:`Återställ inställningar`,deleteGroupTitle:`Ta bort grupp`,deleteGroupMessage:`Är du säker på att du vill ta bort denna grupp? Användare i denna grupp kommer att förlora dessa behörigheter.`,deleteGroup:`Ta bort grupp`,disableAuthenticationTitle:`Inaktivera autentisering`,disableAuthenticationMessage:`Är du säker på att du vill inaktivera autentisering? Detta kommer att göra din Bambuddy-instans tillgänglig utan inloggning. Alla användare kommer att finnas kvar i databasen, men autentisering kommer att vara inaktiverat.`,disableAuthentication:`Inaktivera autentisering`,configureBambuddy:`Konfigurera Bambuddy`,systemDefault:`Systemstandard`,archiveSettings:`Arkivinställningar`,newWindow:`Nytt fönster`,embeddedOverlay:`Inbäddat överlägg`,preferredSlicer:`Föredragen slicer`,preferredSlicerDescription:`Slicer som används för slicing i appen via API-sidecar`,openInSlicerLabel:`Öppna i slicer`,openInSlicerInherit:`Samma som API-slicer`,openInSlicerDescription:`Slicer som används av knappen 'Öppna i slicer'. Lämna på 'Samma som API-slicer' för att ärva, eller välj en annan slicer för lokal användning.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev har kända CLI-buggar som blockerar slicing av många Bambu-skapade 3MF-filer — se uppströmsproblem #12426 (segmenteringsfel på målade multi-extruder-filer) och #13386 (parameterintervall strikt valideringsavvisning). Bambu Studio rekommenderas tills uppströmsfixarna landar.`,useSlicerApi:`Använd Slicer API`,useSlicerApiDescription:`När aktiverat öppnar slicing-åtgärder den inbyggda slicing-dialogrutan och anropar slicer-API-sidecar. När avstängt (standard) skickas de vidare till slicern via URI-schema.`,slicerCard:`Slicer`,orcaslicerApiUrl:`OrcaSlicer sidecar-URL`,bambuStudioApiUrl:`Bambu Studio sidecar-URL`,slicerStallTimeout:`Slicer-timeout (minuter)`,slicerStallTimeoutDescription:`Ge upp på en slicing efter denna tid utan framsteg från sidecaren. Tunga modeller som fortsätter rapportera framsteg avbryts aldrig, oavsett hur lång tid de tar. Sidecars som inte rapporterar framsteg använder denna tid som total tidsgräns istället.`,slicerApiUrlDescription:`URL till slicing-API-sidecar-containern. Lämna tomt för att använda SLICER_API_URL / BAMBU_STUDIO_API_URL-miljövariablerna som standard.`,externalCameras:`Externa kameror`,costTracking:`Kostnadsspårning`,billingEnabled:`Aktivera fakturering`,billingEnabledDescription:`Debitera användare för utskrifter och aktivera finansfunktioner`,printerKillSwitch:`Nödstoppsknapp för obehörig utskrift`,printerKillSwitchDescription:`Stoppa omedelbart utskrifter som startar utan auktorisering.`,financeBudgetReset:`Återställ månadsbudget för finanser`,financeBudgetResetDay:`Återställningsdag`,financeBudgetResetDayHelp:`För korta månader används den sista dagen i månaden för återställning.`,financeBudgetResetTimezone:`Återställningstidszon`,financeBudgetResetTimezoneHelp:`Budgetfönstrets start beräknas i denna tidszon.`,rebuildLedger:`Regenerera bokföring`,rebuildLedgerStarted:`Regenerering av bokföring påbörjad`,rebuildLedgerConfirmTitle:`Regenerera bokföring?`,rebuildLedgerConfirmMessage:`Detta kommer att regenerera bokföringen för att reparera historiska saldovärden. Kör detta endast om du vet vad du gör.`,rebuildLedgerInProgress:`Startar regenerering...`,printsOnly:`Endast utskrifter`,totalConsumption:`Total förbrukning`,dataManagement:`Datahantering`,storageUsage:`Lagringsanvändning`,storageUsageDescription:`Fördelning av dataanvändning per kategori`,storageUsageTotal:`Totalt`,storageUsageErrors:`Felmeddelanden`,storageUsageOtherBreakdown:`Övrigt (inkluderar statiska objekt, skript och konfigurationsfiler)`,storageUsageSystem:`System`,storageUsageData:`Data`,storageUsageUnavailable:`Lagringsinformation ej tillgänglig`,clearNotificationLogsDescription:`Ta bort notisloggar äldre än 30 dagar`,resetUiPreferencesDescription:`Återställ sidofältsordning, tema, visningslägen och layoutinställningar. Skrivare, arkiv och inställningar påverkas inte.`,enableHomeAssistant:`Aktivera Home Assistant`,enableMqtt:`Aktivera MQTT`,useTls:`Använd TLS`,enableMetricsEndpoint:`Aktivera mätvärdesändpunkt`,availableMetrics:`Tillgängliga mätvärden`,editUser:`Redigera användare`,deleteUserTitle:`Ta bort användare`,groupName:`Gruppnamn`,leaveEmptyForAnonymous:`Lämna tomt för anonym`,leaveEmptyForNoAuth:`Lämna tomt för ingen autentisering`,enterNewPassword:`Ange nytt lösenord`,confirmNewPassword:`Bekräfta nytt lösenord`,enterGroupName:`Ange gruppnamn`,enterDescriptionOptional:`Ange beskrivning (valfritt)`,enterCurrentPassword:`Ange nuvarande lösenord`,enterNewPasswordMin6:`Ange nytt lösenord (minst 6 tecken)`,toast:{keyCopied:`Nyckel kopierad till urklipp`,copyFailed:`Kunde inte kopiera nyckel`,keyAddedToBrowser:`Nyckel tillagd till API-läsaren`,clearLogsFailed:`Kunde inte rensa loggar`,uiPreferencesReset:`UI-inställningar återställda. Uppdaterar...`,authDisabled:`Autentisering inaktiverad`,authDisableFailed:`Kunde inte inaktivera autentisering`,apiKeyCreated:`API-nyckel skapad`,apiKeyDeleted:`API-nyckel borttagen`,userCreated:`Användare skapad`,userUpdated:`Användare uppdaterad`,userDeleted:`Användare borttagen`,groupCreated:`Grupp skapad`,groupUpdated:`Grupp uppdaterad`,groupDeleted:`Grupp borttagen`,fillRequiredFields:`Fyll i alla obligatoriska fält`,passwordsDoNotMatch:`Lösenorden matchar ej`,passwordTooShort:`Lösenordet måste vara minst 8 tecken`,passwordNeedsUppercase:`Lösenordet måste innehålla minst en versal`,passwordNeedsLowercase:`Lösenordet måste innehålla minst en gemen`,passwordNeedsDigit:`Lösenordet måste innehålla minst en siffra`,passwordNeedsSpecial:`Lösenordet måste innehålla minst ett specialtecken`,enterGroupName:`Ange ett gruppnamn`,settingsSaved:`Inställningar sparade`,noPermissionUpdate:`Du har inte behörighet att ändra inställningar`,cameraSettingsSaved:`Kamerainställningar sparade`,enterCameraUrl:`Ange URL för en kamera`,passwordChanged:`Lösenord ändrat`,connectionFailed:`Anslutning misslyckades`,testFailed:`Test misslyckades`,cameraConnected:`Kamera ansluten{{resolution}}`,cameraConnectedCoalesced:`Kamera ansluten{{resolution}} (delad med en pågående inspelning)`},testConnection:`Testa anslutning`,catalog:{spoolCatalog:`Rullkatalog`,spoolCatalogDescription:`Tomma rullvikter efter märke/typ. Används för automatisk viktsökning när rullar läggs till.`,searchCatalog:`Sök i katalogen...`,addNewEntry:`Lägg till ny post`,namePlaceholder:`Namn (t.ex. Bambu Lab - Plast)`,weight:`Vikt`,type:`Typ`,default:`Standard`,custom:`Anpassad`,noMatch:`Inga poster matchar din sökning`,empty:`Inga poster i katalogen`,deleteEntry:`Ta bort post`,deleteConfirm:`Är du säker på att du vill ta bort "{{name}}"?`,resetCatalog:`Återställ katalog`,resetConfirm:`Återställ katalog till standard? Detta kommer att ta bort alla anpassade poster.`,loadFailed:`Kunde inte ladda rullkatalogen`,nameWeightRequired:`Namn och vikt krävs`,entryAdded:`Post tillagd`,addFailed:`Kunde inte lägga till post`,entryUpdated:`Post uppdaterad`,updateFailed:`Kunde inte uppdatera post`,entryDeleted:`Post borttagen`,deleteFailed:`Kunde inte ta bort post`,resetSuccess:`Katalog återställd till standard`,resetFailed:`Kunde inte återställa katalog`,exported:`Exporterade {{count}} poster`,imported:`Importerade {{added}} poster ({{skipped}} hoppade över)`,importFailed:`Kunde inte importera: ogiltigt JSON-format`,exportTooltip:`Exportera katalog till JSON`,importTooltip:`Importera katalog från JSON`,resetTooltip:`Återställ till standard`,selectedCount:`{{count}} valda`,deleteSelected:`Ta bort valda`,bulkDeleteConfirm:`Är du säker på att du vill ta bort {{count}} poster?`,bulkDeleted:`Tog bort {{count}} poster`,bulkDeleteFailed:`Kunde inte ta bort poster`,material:`Material`,spoolWeight:`Rullvikt`,color:`Färg`,updateSpoolWeight:`Uppdatera rullvikt`,filamentUpdated:`Filament uppdaterat`,filamentUpdateFailed:`Kunde inte uppdatera filament`,filamentUpdateInvalid:`Ogiltig filamentdata`,keepExistingSpoolWeight:`Behåll tidigare vikt för befintliga rullar`,keepExistingSpoolWeightDesc:`Rullar som redan skapats med denna filamenttyp behåller den gamla taravikten. Nya rullar använder den uppdaterade vikten.`,applyToAllSpools:`Tillämpa på alla rullar`,applyToAllSpoolsDesc:`Alla viktberäkningar för denna filamenttyp använder omedelbart den nya taravikten.`},colorCatalog:{title:`Färgkatalog`,description:`Filamentfärger efter tillverkare/material. Används för automatisk färgsökning när rullar läggs till.`,searchColors:`Sök färger...`,allManufacturers:`Alla tillverkare`,addNewColor:`Lägg till ny färg`,manufacturer:`Tillverkare`,colorName:`Färgnamn`,hex:`Hex`,materialOptional:`Material (valfritt)`,showing:`Visar {{filtered}} av {{total}} färger`,noMatch:`Inga färger matchar din sökning`,empty:`Inga färger i katalogen`,deleteColor:`Ta bort färg`,deleteConfirm:`Är du säker på att du vill ta bort "{{name}}"?`,resetCatalog:`Återställ färgkatalog`,resetConfirm:`Återställ katalog till standard? Detta kommer att ta bort alla anpassade färger.`,sync:`Synkronisera`,starting:`Startar...`,syncTooltip:`Synkronisera från FilamentColors.xyz (2000+ färger, kan ta en minut)`,loadFailed:`Kunde inte ladda färgkatalogen`,fieldsRequired:`Tillverkare, färgnamn och hex-färg krävs`,colorAdded:`Färg tillagd`,addFailed:`Kunde inte lägga till färg`,colorUpdated:`Färg uppdaterad`,updateFailed:`Kunde inte uppdatera färg`,colorDeleted:`Färg borttagen`,deleteFailed:`Kunde inte ta bort färg`,resetSuccess:`Färgkatalog återställd till standard`,resetFailed:`Kunde inte återställa katalog`,syncUpToDate:`Redan uppdaterad ({{count}} färger kontrollerade)`,syncComplete:`Lade till {{added}} nya färger ({{skipped}} fanns redan)`,syncError:`Synkroniseringsfel`,syncFailed:`Kunde inte synkronisera från FilamentColors.xyz`,exported:`Exporterade {{count}} färger`,imported:`Importerade {{added}} färger ({{skipped}} hoppade över)`,importFailed:`Kunde inte importera: ogiltigt JSON-format`,selectedCount:`{{count}} valda`,deleteSelected:`Ta bort valda`,bulkDeleteConfirm:`Är du säker på att du vill ta bort {{count}} färger?`,bulkDeleted:`Tog bort {{count}} färger`,bulkDeleteFailed:`Kunde inte ta bort färger`},dateFormat:`Datumformat`,dateFormatUs:`US (MM/DD/ÅÅÅÅ)`,dateFormatEu:`EU (DD/MM/ÅÅÅÅ)`,dateFormatIso:`ISO (ÅÅÅÅ-MM-DD)`,timeFormat:`Tidsformat`,timeFormat12:`12-timmars (3:30 PM)`,timeFormat24:`24-timmars (15:30)`,defaultPrinter:`Standardskrivare`,defaultPrinterDescription:`Förvälj denna skrivare för uppladdningar, omutskrifter och andra operationer.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Använd sidofältet för att ordna om objekt, återställa synlighet och hantera anpassade länkar.`,setDefault:`Sätt som standard`,sidebarOrderSetDefaultHint:`Sätt som standard tillämpar den aktuella menyordningen på användare som inte har anpassat sin.`,sidebarDefaultSet:`Standardmenyordning har ställts in.`,sidebarDefaultCleared:`Standardmenyordning rensad.`,sidebarDefaultFailed:`Kunde inte ställa in standardmenyordning.`,reset:`Återställ`,darkMode:`Mörkt läge`,lightMode:`Ljust läge`,active:`(aktivt)`,background:`Bakgrund`,accent:`Accent`,style:`Stil`,bgNeutral:`Neutral`,bgWarm:`Varm`,bgCool:`Kall`,bgOled:`OLED Svart`,bgSlate:`Skifferblå`,bgForest:`Skogsgrön`,accentGreen:`Grön`,accentTeal:`Blågrön`,accentBlue:`Blå`,accentOrange:`Orange`,accentPurple:`Lila`,accentRed:`Röd`,styleClassic:`Klassisk`,styleGlow:`Sken`,styleVibrant:`Livfull`,themeToggleHint:`Växla mellan mörkt, ljust och systemläge med ikonen i sidomenyn.`,progressInTitle:`Utskriftsförlopp i flik`,progressInTitleDescription:`Visa den aktiva utskriftens procentförlopp och en ring i webbläsarfliken.`,autoArchivePrints:`Auto-arkivera utskrifter`,autoArchiveDescription:`Spara automatiskt 3MF-filer när utskrifter slutförs`,saveThumbnailsDescription:`Extrahera och spara förhandsvisningsbilder från 3MF-filer`,captureFinishPhotoDescription:`Ta ett foto från skrivarkameran när utskriften slutförs. Bambuddy spelar in en kort timelapse under utskriften så att fotot kan hämtas från ögonblicket innan byggplattan sänks; timelapse-filen behålls om du aktiverat timelapse för denna utskrift, annars tas den automatiskt bort efter att fotot tagits.`,finishPhotoRestorePlate:`Återställ platta för foto`,finishPhotoRestorePlateDescription:`Skrivaren sänker byggplattan cirka 100 mm när en utskrift slutförs, vilket lämnar den färdiga utskriften under kamerans bildruta. Bambuddy höjer tillbaka den precis ovanför det sista utskrivna skiktet, tar fotot och sänker den igen. Hoppas över när utskriftshöjden är okänd eller om ett annat jobb är köat.`,ffmpegNotInstalled:`ffmpeg är inte installerat`,ffmpegRequired:`Kamerainspelning kräver ffmpeg. Installera det via <brew>brew install ffmpeg</brew> (macOS) eller <apt>apt install ffmpeg</apt> (Linux).`,camera:`Kamera`,cameraViewMode:`Kameravy`,cameraOverlayDescription:`Kameran öppnas i en storleksändringsbart överlägg på huvudskärmen`,cameraWindowDescription:`Kameran öppnas i ett separat webbläsarfönster`,externalCamerasDescription:`Konfigurera externa kameror för att ersätta den inbyggda skrivarkameran. Stöder MJPEG-strömmar, RTSP, HTTP-ögonblicksbilder och USB-kameror (V4L2). När aktiverad används den externa kameran för live-vy och färdigbilder.`,cameraPlaceholderUsb:`Enhetssökväg (/dev/video0)`,cameraPlaceholderUrl:`Kamera-URL (rtsp://... eller http://...)`,cameraTypeMjpeg:`MJPEG-ström`,cameraTypeRtsp:`RTSP-ström`,cameraTypeSnapshot:`HTTP-ögonblicksbild`,cameraTypeUsb:`USB-kamera (V4L2)`,cameraSnapshotUrl:`Ögonblicksbild-URL (valfritt)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`Enkelbild-URL som används för notisminibilder, färdigbilder, layer-timelapse-bilder och plattdetektering. Timelapse och plattdetektering kräver varsin per-skrivare-växel — denna URL är bara bildkällan de använder när aktiva. Lämna tomt för att fånga från live-strömmen ovan. Användbart för go2rtc (/api/frame.jpeg) och IP-kameror med en dedikerad ögonblicksbild-ändpunkt.`,cameraRotation:`Rotation`,test:`Test`,connected:`Ansluten`,disconnected:`Frånkopplad`,currency:`Valuta`,defaultFilamentCost:`Standardfilamentkostnad (per kg)`,electricityCost:`Elkostnad per kWh`,energyDisplayMode:`Energivisningsläge`,energyModePrintDescription:`Instrumentpanelen visar summan av energin som använts under utskrifter`,energyModeTotalDescription:`Instrumentpanelen visar livstidsenergi från smarta kontakter`,fileManager:`Filhanterare`,createArchiveEntry:`Skapa arkivpost vid utskrift`,createArchiveEntryDescription:`När du skriver ut från Filhanteraren, skapa en arkivpost`,lowDiskSpaceWarning:`Varning för lågt diskutrymme`,lowDiskSpaceDescription:`Visa en varning när tillgängligt diskutrymme är under detta tröskelvärde`,printerFirmware:`Skrivarens firmware`,checkFirmwareDescription:`Kontrollera om det finns firmwareuppdateringar för skrivaren från Bambu Lab`,bambuddySoftware:`Bambuddy-programvara`,autoCheckDescription:`Sök automatiskt efter nya versioner vid start`,checkNow:`Sök nu`,updateAvailableVersion:`Uppdatering tillgänglig: v{{version}}`,releaseNotes:`Versionsinformation`,updateViaDocker:`Uppdatera via Docker Compose:`,composeDirectory:`Compose-katalog`,composeDirectoryHint:`Mappen som innehåller din docker-compose.yml. Lämna tomt för att utelämna cd.`,copyUpdateCommand:`Kopiera uppdateringskommando`,updateViaHomeAssistant:`Uppdateringar hanteras av Home Assistant Supervisor. Öppna Inställningar → Tillägg → Bambuddy i Home Assistant för att installera den nya versionen.`,updateViaWindowsInstaller:`Windows-installationer uppdateras genom att köra installationsprogrammet igen. Ladda ner den nya versionen nedan — din data, inställningar och skrivare bevaras.`,downloadWindowsInstaller:`Ladda ner installationsprogram för v{{version}}`,installUpdate:`Installera uppdatering`,latestVersionRunning:`Du kör den senaste versionen`,failedToCheckUpdates:`Kunde inte kontrollera uppdateringar: {{error}}`,backupRestore:`Säkerhetskopia och återställning`,backupRestoreDescription:`Exportera/importera inställningar och konfigurera GitHub-säkerhetskopia`,goToBackup:`Gå till säkerhetskopia`,externalUrl:`Extern URL`,externalUrlDescription:`Den externa URL:en där Bambuddy kan nås. Används för notisbilder och externa integrationer.`,bambuddyUrl:`Bambuddy-URL`,externalUrlHint:`Inkludera protokoll och port (t.ex. http://192.168.1.100:8000)`,ftpRetry:`FTP-omförsök`,ftpRetryDescription:`Försök igen med FTP-operationer när skrivarens WiFi är opålitlig. Gäller för 3MF-nedladdningar, utskriftsuppladdningar, timelapse-nedladdningar och firmwareuppdateringar.`,autoRetryDescription:`Försök automatiskt igen med misslyckade FTP-operationer`,retryAttempts:`Försök igen`,retryDelay:`Fördröjning mellan försök`,connectionTimeout:`Anslutningstimeout`,time_one:`{{count}} gång`,time_other:`{{count}} gånger`,second_one:`{{count}} sekund`,second_other:`{{count}} sekunder`,nSeconds:`{{count}} sekunder`,increaseForWeakWifi:`Öka för skrivare med svag WiFi`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Anslut till Home Assistant för att styra smarta kontakter via HA:s REST API. Stöder switch, light, input_boolean och script-entiteter.`,homeAssistantUrl:`Home Assistant-URL`,longLivedAccessToken:`Långlivad åtkomst-token`,haTokenHint:`Skapa en token i HA: Profil → Långlivade åtkomst-tokens → Skapa token`,connectionSuccessful:`Anslutning lyckades`,connectionFailed:`Anslutning misslyckades`,haConnectionSuccess:`Anslöt framgångsrikt till Home Assistant.`,haConnectionFailed:`Kunde inte ansluta till Home Assistant.`,mqttPublishing:`MQTT-publicering`,mqttDescription:`Publicera Bambuddy-händelser till en extern MQTT-mäklare för integration med Node-RED, Home Assistant och andra automatiseringssystem.`,mqttEnableDescription:`Publicera händelser till extern MQTT-mäklare`,brokerHostname:`Mäklarens värdnamn`,port:`Port`,usernameOptional:`Användarnamn (valfritt)`,passwordOptional:`Lösenord (valfritt)`,topicPrefix:`Ämnesprefix`,topicPrefixHint:`Ämnen kommer att vara: {{prefix}}/printers/<serial>/status, etc.`,prometheusMetrics:`Prometheus-mätvärden`,prometheusEndpointDescription:`Exponera skrivarmätvärden på <code>/api/v1/metrics</code> för Prometheus/Grafana-övervakning.`,bearerTokenOptional:`Bärar-token (valfritt)`,bearerTokenHint:`Om inställt måste förfrågningar inkludera <code>Authorization: Bearer <token></code>`,metricsConnectionStatus:`Anslutningsstatus`,metricsPrinterState:`Skrivarstatus (inaktiv/skriver ut/etc)`,metricsPrintProgress:`Utskriftsförlopp 0-100%`,metricsBedTemp:`Byggplattstemperatur`,metricsNozzleTemp:`Munstyckstemperatur`,metricsPrintsTotal:`Totala utskrifter efter resultat`,metricsMore:`...och mer (skikt, fläktar, kö, filamentanvändning)`,smartPlugsDescription:`Anslut smarta kontakter (Tasmota eller Home Assistant) för att automatisera strömkontroll och spåra energiförbrukning för dina skrivare.`,allOn:`Sätt på alla`,allOff:`Stäng av alla`,addSmartPlug:`Lägg till smart kontakt`,energySummary:`Energisammanfattning`,currentPower:`Aktuell effekt`,plugsOnline:`{{reachable}}/{{total}} kontakter online`,today:`Idag`,yesterday:`Igår`,total:`Totalt`,enablePlugsForSummary:`Aktivera kontakter för att se energisammanfattning`,addNotificationProvider:`Lägg till`,systemBadge:`(System)`,creating:`Skapar...`,changing:`Ändrar...`,deleteUserAndItems:`Ta bort användare OCH deras objekt`,deleteUserKeepItems:`Ta bort användare, behåll objekt (blir ägarlösa)`,ok:`OK`,twoFa:{totpTitle:`Autentiseringsapp (TOTP)`,totpDesc:`Använd en autentiseringsapp som Google Authenticator, Aegis eller Authy.`,emailOtpTitle:`E-post OTP`,emailOtpDesc:`Skicka en engångskod till {{email}} när du loggar in.`,emailOtpNoEmail:`Lägg till en e-postadress till ditt konto för att aktivera denna metod.`,addEmailFirst:`Ditt konto har ingen e-postadress. Be en admin att lägga till en innan du aktiverar e-post OTP.`,setupTotp:`Ställ in autentiseringsapp`,setupAuthApp:`Ställ in autentiseringsapp`,setupInstructions:`Skanna QR-koden nedan med din autentiseringsapp, bekräfta sedan med en kod.`,manualEntry:`Kan du inte skanna? Ange denna hemlighet manuellt:`,scannedContinue:`Jag har skannat koden — fortsätt`,enterCodeToConfirm:`Ange den 6-siffriga koden från din autentiseringsapp för att bekräfta konfigurationen.`,activate:`Aktivera`,disableTotp:`Inaktivera autentiseringsapp`,disableConfirmHint:`Ange en giltig TOTP-kod eller en reservkod för att inaktivera autentiseraren.`,totpDisabled:`Autentiseringsapp inaktiverad.`,emailOtpEnabled:`E-post OTP aktiverad.`,emailOtpDisabled:`E-post OTP inaktiverad.`,smtpRequired:`Konfigurera och testa SMTP-inställningar först.`,invalidCode:`Ogiltig kod. Försök igen.`,enableEmailOtp:`Aktivera e-post OTP`,disableEmailOtp:`Inaktivera e-post OTP`,emailSetupEnterCode:`En verifieringskod har skickats till din e-postadress. Ange den nedan för att bekräfta att du äger denna inkorg.`,verifyAndEnable:`Verifiera och aktivera`,emailDisablePasswordHint:`Ange ditt kontolösenord för att bekräfta inaktiveringen av e-post OTP.`,passwordPlaceholder:`Ange ditt lösenord`,backupCodesTitle:`Spara dina reservkoder`,backupCodesWarning:`Spara dessa koder på en säker plats. Varje kod kan endast användas en gång och de kommer inte att visas igen.`,backupCodesRemaining:`{{count}} reservkoder kvar`,savedCodes:`Jag har sparat mina koder`,regenBackup:`Regenerera reservkoder`,regenBackupHint:`Ange din nuvarande TOTP-kod för att generera 10 nya reservkoder. Alla befintliga reservkoder kommer att ogiltigförklaras.`,newBackupCodes:`Nya reservkoder`,linkedAccounts:`Länkade SSO-konton`,linkedAccountsDesc:`Dessa externa identitetsleverantörer är länkade till ditt konto.`,oidcUnlinked:`Konto bortkopplat.`},sessionPolicy:{title:`Sessionspolicy`,description:`Maximal sessionstid för nya användarinloggningar. Redan utfärdade tokens behåller sin ursprungliga utgångstid.`,preset24h:`24 timmar`,preset7d:`7 dagar`,preset30d:`30 dagar`,customHoursLabel:`Anpassad sessionstid i timmar`,hoursSuffix:`timmar`,warning:`Längre sessioner minskar skyddet mot automatisk utloggning. Rekommenderas endast för betrodda enanvändarutplaceringar.`},oidc:{title:`SSO / OIDC-leverantörer`,desc:`Konfigurera OpenID Connect-leverantörer för att tillåta enstegsinloggning via externa identitetsleverantörer.`,addProvider:`Lägg till leverantör`,newProvider:`Ny leverantör`,empty:`Inga OIDC-leverantörer konfigurerade än.`,created:`Leverantör skapad.`,updated:`Leverantör uppdaterad.`,deleted:`Leverantör borttagen.`,refreshIcon:`Uppdatera ikon`,removeIcon:`Ta bort ikon`,iconRefreshed:`Ikon uppdaterad.`,iconRemoved:`Ikon borttagen.`,iconFetchFailed:`Kunde inte hämta ikon från leverantörs-URL:en.`,deleteTitle:`Ta bort leverantör`,deleteMessage:`Ta bort "{{name}}"? Alla länkade användarkonton kommer att kopplas från.`,form:{name:`Visningsnamn`,issuerUrl:`Utgivar-URL`,clientId:`Klient-ID`,clientSecret:`Klienthemlighet`,scopes:`Omfång`,iconUrl:`Ikon-URL (valfritt)`,enabled:`Aktiverad`,autoCreate:`Auto-skapa användare`,autoCreateDesc:`Skapa automatiskt ett lokalt konto vid första inloggning.`,autoLink:`Auto-länka befintliga konton`,autoLinkDesc:`Länka befintliga lokala konton genom att matcha e-post vid första inloggning.`,secretHint:`lämna tomt för att behålla nuvarande`,secretPlaceholder:`ny hemlighet`,emailClaim:`E-postanspråk`,emailClaimDesc:`JWT-anspråk som används som e-postidentitet. Använd "preferred_username" eller "upn" för Azure Entra ID (som inte skickar email_verified). Använd endast betrodda anspråksnamn.`,emailClaimPlaceholder:`email`,emailClaimCustomClaimAutoLinkWarning:`Anpassade anspråk är säkra för auto-länk endast när värdet administreras av hyresvärden (t.ex. Azure Entra ID upn / preferred_username). Aktivera inte auto-länk om din IdP tillåter användare att självhävda detta anspråk.`,requireEmailVerified:`Kräv verifierad e-post`,requireEmailVerifiedDesc:`Acceptera endast e-postanspråket när leverantören markerar det som verifierat.`,requireEmailVerifiedWarning:`Varning: e-post kommer att accepteras även utan verifiering. Använd endast med betrodda leverantörer.`,requireEmailVerifiedAutoLink:`Inaktivera auto-länk först för att ändra denna inställning.`,defaultGroup:`Standardgrupp`,defaultGroupDesc:`Grupp som tilldelas auto-skapade användare. Faller tillbaka till Åskådare om inte inställt.`,defaultGroupViewersFallback:`Åskådare (standard)`,autologin:`Autologin`,autologinDesc:`Omdirigera icke autentiserade besökare direkt till denna leverantör. Endast en leverantör kan ha denna flagga.`}},encryption:{title:`MFA-krypteringsstatus`,enabledFromEnv:`Kryptering i vila aktiverad (nyckel från MFA_ENCRYPTION_KEY-miljövariabel)`,enabledFromFile:`Kryptering i vila aktiverad (nyckel laddad från datakatalog)`,enabledGenerated:`Kryptering i vila aktiverad med auto-genererad nyckel`,notConfigured:`Kryptering i vila ej konfigurerad`,notConfiguredDesc:`TOTP-hemligheter och OIDC client_secrets lagras i klartext. Sätt MFA_ENCRYPTION_KEY eller starta om Bambuddy med en skrivbar datakatalog för att auto-generera en.`,allEncrypted:`Alla MFA-hemligheter är krypterade i vila.`,legacyRowsLabel:`Äldre klartextrader`,encryptedRowsLabel:`Krypterade rader`,legacyRowsWarning:`{{count}} äldre klartextrad(er) upptäckta. Spara om OIDC-leverantören eller registrera om användarens autentiseringsapp för att migrera till krypterad lagring.`,backupHint:`Den auto-genererade nyckeln lagras på DATA_DIR/.mfa_encryption_key och ingår i lokala säkerhetskopior. Håll dina säkerhetskopior säkra eller sätt MFA_ENCRYPTION_KEY explicit.`,decryptionBrokenTitle:`Krypteringsnyckel saknas`,decryptionBrokenError:`{{count}} krypterad(e) post(er) kan inte dekrypteras eftersom krypteringsnyckeln inte längre är tillgänglig. Återställ den tidigare MFA_ENCRYPTION_KEY eller DATA_DIR/.mfa_encryption_key för att återställa.`,migrationErrorWarning:`{{count}} äldre rad(er) kunde inte krypteras om vid start. Kontrollera serverloggar och starta om Bambuddy för att försöka igen.`},pipelineLimits:{title:`Gränser för slicer-pipeline`,maxCopiesLabel:`Max kopior per körning`,maxCopiesDesc:`Övre gräns för antalet kopior som operatörer kan begära vid körning av en pipeline. Server-sidans hårda gräns är 1000.`},pipelines:{title:`Slicer-pipelines`,subtitle:`Återanvändbara inställningspaket (skrivare + process + filament + byggplattstyp). Spara en från slicing-dialogrutan och använd den med ett klick på nästa fil.`,loading:`Laddar pipelines...`,loadError:`Kunde inte ladda pipelines.`,confirmDelete:`Ta bort denna pipeline? Detta kan inte ångras.`,staleWarning:`En eller flera refererade inställningar finns inte längre. Spara om denna pipeline från slicing-dialogrutan för att åtgärda.`,empty:{title:`Inga pipelines än.`,howto:`Öppna slicing-dialogrutan för någon fil, välj din skrivare/process/filament/byggplattstyp, klicka sedan på "Spara som pipeline". Dina sparade pipelines kommer att visas här.`},field:{name:`Pipeline-namn`,description:`Beskrivning`,targetPrinter:`Målskrivare`,noTarget:`— Inget mål —`,targetKind:`Måltyp`,targetKindSpecific:`Specifik skrivare`,targetKindClass:`Skrivarklass`,targetModelClass:`Skrivarmodell`,fanoutStrategy:`Fördelningsstrategi`,fanout:{max_parallel:`Max parallell — fördela över alla lediga matchande skrivare`,round_robin:`Rotationskö — cykla genom berättigade skrivare`,fill_one_first:`Fyll en först — fäst alla kopior till en skrivare`},fanoutShort:{max_parallel:`parallell`,round_robin:`rotationskö`,fill_one_first:`fyll en först`}},action:{save:`Spara`,cancel:`Avbryt`,rename:`Döp om`,delete:`Ta bort`},slot:{printer:`Skrivare`,process:`Process`,filament:`Filament`,filamentN:`Filament {{n}}`,filamentAll:`Alla {{n}} fack`,bed:`Byggplatta`},group:{profiles:`Profiler`,filaments:`Filament`},searchPlaceholder:`Sök pipelines...`,filterTargetType:`Filtrera efter måltyp`,filterTarget:`Filtrera efter mål`,filter:{all:`Alla mål`,noTarget:`Inget mål inställt`,count:`{{shown}} / {{total}}`,noMatches:`Inga pipelines matchar de aktuella filtren.`},toast:{saved:`Pipeline sparad`,saveFailed:`Kunde inte spara`,deleted:`Pipeline borttagen`,deleteFailed:`Kunde inte ta bort`},noTargetHint:`Sätt en målskrivare för att köra denna`,noTargetWarning:`Sätt en målskrivare innan du kör denna pipeline.`,runs:{lastRun:`Senaste körning`,status:{queued:`köad`,slicing:`slicar`,dispatching:`skickar`,in_progress:`skriver ut`,completed:`slutförd`,failed:`misslyckad`,partial_failure:`delvis misslyckad`,cancelled:`avbruten`}}}},notification:{printStarted:{title:`Utskrift startad`,body:`{{printer}}: {{filename}} har börjat skrivas ut`},printCompleted:{title:`Utskrift slutförd`,body:`{{printer}}: {{filename}} slutfördes`},printFailed:{title:`Utskrift misslyckades`,body:`{{printer}}: {{filename}} misslyckades`},printStopped:{title:`Utskrift stoppad`,body:`{{printer}}: {{filename}} stoppades`},printProgress:{title:`Utskriftsförlopp`,body:`{{printer}}: {{filename}} är {{percent}}% klar`},printerOffline:{title:`Skrivare offline`,body:`{{printer}} är offline`},printerError:{title:`Skrivarfel`,body:`{{printer}}: {{error}}`},filamentLow:{title:`Lågt filament`,body:`{{printer}}: Filamentet håller på att ta slut`},maintenanceDue:{title:`Underhåll uteblivet`,body:`{{printer}}: {{items}} behöver uppmärksamhet`}},errors:{generic:`Något gick fel`,networkError:`Nätverksfel. Kontrollera din anslutning.`,notFound:`Hittades ej`,unauthorized:`Ej behörig`,serverError:`Serverfel`,validationError:`Kontrollera din inmatning`,printerConnectionFailed:`Kunde inte ansluta till skrivare`,saveFailed:`Kunde inte spara ändringar`,deleteFailed:`Kunde inte ta bort`,loadFailed:`Kunde inte ladda data`},hmsErrors:{title:`Fel - {{name}}`,noErrors:`Inga fel`,viewOnWiki:`Visa på Bambu Lab Wiki`,mqttVerifyFailedRemedy:`Aktivera utvecklarläge på skrivaren, starta om skrivaren och starta sedan jobbet igen.`,unknownCode:`Okänd HMS-kod — se Bambu Lab wiki för detaljer.`,clearInstructions:`Rensa fel på skrivaren för att avfärda dem här.`,clearErrors:`Rensa fel`,clearSuccess:`HMS-fel rensade`,clearFailed:`Kunde inte rensa HMS-fel`,actionSuccess:`Åtgärd skickad till skrivare`,actionFailed:`Kunde inte skicka åtgärd`,runoutExpectedSlot:`Filamentet tog slut i {{ranOut}}. Skrivaren väntar nu på kompatibelt filament i {{expected}}. Sätt in en rulle i {{expected}} och välj sedan Försök igen.`,runoutExpectedSlotOnly:`Skrivaren väntar på kompatibelt filament i {{expected}}. Sätt in en rulle där och välj sedan Försök igen.`,runoutSlotUnknown:`Filament tog slut och utskriften är pausad. Bambuddy kunde inte avgöra vilket fack skrivaren nu väntar på — kontrollera skrivarens skärm för det begärda facket.`,actions:{RESUME_PRINTING:`Fortsätt utskrift`,RESUME_PRINTING_DEFECTS:`Fortsätt (defekter acceptabla)`,RESUME_PRINTING_PROBELM_SOLVED:`Fortsätt (problem löst)`,STOP_PRINTING:`Stoppa utskrift`,CHECK_ASSISTANT:`Kontrollera assistent`,FILAMENT_EXTRUDED:`Filament extruderat, fortsätt`,RETRY_FILAMENT_EXTRUDED:`Inte extruderat än, försök igen`,CONTINUE:`Klar, fortsätt`,LOAD_VIRTUAL_TRAY:`Ladda filament`,OK_BUTTON:`OK`,FILAMENT_LOAD_RESUME:`Filament laddat, fortsätt`,JUMP_TO_LIVEVIEW:`Visa livevy`,NO_REMINDER_NEXT_TIME:`Ingen påminnelse nästa gång`,REFRESH_NOZZLE:`Kontrollera om`,IGNORE_NO_REMINDER_NEXT_TIME:`Ignorera. Ingen påminnelse nästa gång`,IGNORE_RESUME:`Ignorera och fortsätt`,PROBLEM_SOLVED_RESUME:`Problemet löst och fortsätt`,TURN_OFF_FIRE_ALARM:`Förstått, stäng av brandlarmet.`,RETRY_PROBLEM_SOLVED:`Försök igen (problem löst)`,CANCLE:`Avbryt`,STOP_DRYING:`Stoppa torkning`,PROCEED:`Fortsätt`,OK_JUMP_RACK:`OK`,ABORT:`Avbryt`,DISABLE_PURIFICATION:`Inaktivera rening för denna utskrift`,DONT_REMIND_NEXT_TIME:`Påminn mig inte nästa gång`,DBL_CHECK_CANCEL:`Avbryt`,DBL_CHECK_DONE:`Klar`,DBL_CHECK_RETRY:`Försök igen`,DBL_CHECK_RESUME:`Fortsätt`,DBL_CHECK_OK:`Bekräfta`,REMOVE_CLOSE_BTN:`Stäng`}},mqttDebug:{title:`MQTT-felsökningslogg`,searchPlaceholder:`Sök ämne eller nyttolast...`,noMessages:`Inga meddelanden loggade än`,startLoggingHint:`Klicka på "Starta loggning" för att börja fånga MQTT-meddelanden`,noMessagesMatch:`Inga meddelanden matchar ditt filter`,adjustFilterHint:`Försök justera din sökning eller filterkriterier`,incoming:`Inkommande`,outgoing:`Utgående`,loggingStopped:`Loggning stoppad`,loggingActive:`Loggning aktiv - meddelanden kommer att uppdateras automatiskt`,startLogging:`Starta loggning`,stopLogging:`Stoppa loggning`,clearLog:`Rensa logg`,topic:`Ämne`,timestamp:`Tidsstämpel`,direction:`Riktning`,all:`Alla`},printerFiles:{zipStarted_one:`Startade ZIP-nedladdning för {{count}} fil`,zipStarted_other:`Startade ZIP-nedladdning för {{count}} files`,zipPartial:`Startade ZIP-nedladdning med {{successful}} av {{total}} filer; resten kunde inte hämtas`,downloadFailed:`Nedladdning misslyckades: {{error}}`,unknownError:`Okänt fel`,shiftSelectHint:`Skift-klicka för att välja ett intervall`,selectFile:`Markera {{name}}`,deselectFile:`Avmarkera {{name}}`,title:`Filhanterare`,storageUsed:`Använt:`,storageFree:`Ledigt:`,filterPlaceholder:`Filtrera filer...`,deleteButton:`Ta bort`,deleteFiles:`Ta bort {{count}} filer`,deleteFileConfirm:`Ta bort "{{name}}"? Detta kan inte ångras.`,deleteFilesConfirm:`Ta bort {{count}} markerade filer? Detta kan inte ångras.`,noFiles:`Inga filer på skrivaren`,printerUnavailable:`Skrivarfiltjänsten är inte tillgänglig. Försök igen när skrivaren är tillgänglig.`,loadingFiles:`Laddar filer...`,failedToLoad:`Kunde inte ladda filer`,toast:{filesDeleted:`Tog bort {{count}} fil(er)`,deleteFailed:`Kunde inte ta bort: {{error}}`}},confirm:{delete:`Är du säker på att du vill ta bort detta?`,unsavedChanges:`Du har osparade ändringar. Är du säker på att du vill lämna?`,clearQueue:`Är du säker på att du vill rensa kön?`},login:{title:`Bambuddy-inloggning`,subtitle:`Logga in på ditt konto`,username:`Användarnamn`,usernamePlaceholder:`Ange ditt användarnamn`,usernameOrEmail:`Användarnamn eller e-post`,usernameOrEmailPlaceholder:`Användarnamn eller @ e-post`,password:`Lösenord`,passwordPlaceholder:`Ange ditt lösenord`,signIn:`Logga in`,signingIn:`Loggar in...`,rememberMe:`Kom ihåg mig`,forgotPassword:`Glömt ditt lösenord?`,autologinFailed:`Automatisk SSO-inloggning misslyckades. Välj en leverantör nedan för att fortsätta.`,localDisabledNotice:`Lokal inloggning är inaktiverad. Använd en av SSO-leverantörerna nedan.`,loginSuccess:`Inloggad`,loginFailed:`Inloggning misslyckades`,enterCredentials:`Ange användarnamn och lösenord`,enterEmail:`Ange din e-postadress`,oidcLoginFailed:`OIDC-inloggning misslyckades`,oidcErrors:{providerError:`Identitetsleverantören returnerade ett fel`,missingParameters:`OIDC-återanrop saknar obligatoriska parametrar`,invalidState:`OIDC-status är ogiltig eller har redan använts`,stateExpired:`OIDC-inloggningssession har löpt ut — försök igen`,providerNotFound:`OIDC-leverantör hittades ej`,discoveryFailed:`Kunde inte hämta OIDC-upptäcktsdokument`,invalidDiscovery:`OIDC-upptäcktsdokument är ogiltigt`,networkError:`Nätverksfel under OIDC-tokenutbyte`,badResponse:`Oväntat svar under OIDC-tokenutbyte`,noIdToken:`OIDC-leverantören returnerade ingen ID-token`,validationFailed:`OIDC-tokenvalidering misslyckades`,nonceMismatch:`OIDC-nonce-felmatchning — möjlig replay-attack`,missingSubClaim:`OIDC-token saknar sub-anspråk`,noLinkedAccount:`Ingen lokal användare är länkad till denna OIDC-identitet`,accountInactive:`Ditt konto är inaktivt`,userResolutionFailed:`Kunde inte lösa ditt konto`,internalError:`Ett internt fel uppstod under OIDC-inloggning`,tokenExchangeFailed:`OIDC-tokenutbyte misslyckades`},forgotPasswordTitle:`Glömt lösenord`,forgotPasswordMessage:`Om du har glömt ditt lösenord, kontakta din systemadministratör för att återställa det.`,forgotPasswordEmailMessage:`Ange din e-postadress så skickar vi ett nytt lösenord till dig.`,emailAddress:`E-postadress`,emailPlaceholder:`din.e-post@example.com`,cancel:`Avbryt`,sending:`Skickar...`,sendResetEmail:`Skicka återställnings-e-post`,howToReset:`Så här återställer du ditt lösenord:`,resetStep1:`Kontakta din Bambuddy-administratör`,resetStep2:`Be dem återställa ditt lösenord i Användarhantering`,resetStep3:`De kan sätta ett nytt tillfälligt lösenord åt dig`,resetStep4:`Logga in med det nya lösenordet och ändra det under Inställningar`,gotIt:`Förstått`,resetPassword:{title:`Sätt nytt lösenord`,subtitle:`Ange och bekräfta ditt nya lösenord nedan.`,newPassword:`Nytt lösenord`,newPasswordPlaceholder:`Minst 8 tecken`,confirmPassword:`Bekräfta lösenord`,confirmPasswordPlaceholder:`Upprepa nytt lösenord`,saving:`Sparar…`,submit:`Sätt nytt lösenord`,backToLogin:`Tillbaka till inloggning`,passwordsDoNotMatch:`Lösenorden matchar inte`,passwordTooShort:`Lösenordet måste vara minst 8 tecken`,resetFailed:`Lösenordsåterställning misslyckades. Länken kan ha löpt ut.`},twoFA:{title:`Tvåfaktorsautentisering`,subtitle:`Ditt konto är skyddat med 2FA. Ange verifieringskoden nedan.`,methodAuthenticator:`Autentiseringsapp`,methodEmail:`E-postkod`,methodBackup:`Reservkod`,instructionsTotp:`Öppna din autentiseringsapp och ange den 6-siffriga koden för Bambuddy.`,instructionsEmail:`En 6-siffrig kod har skickats till din e-postadress. Den går ut om 10 minuter.`,instructionsEmailNotSent:`Klicka på knappen nedan för att ta emot en verifieringskod via e-post.`,instructionsBackup:`Ange en av dina 8-teckens reservåterställningskoder. Varje kod kan endast användas en gång.`,sendCodeButton:`Skicka kod via e-post`,sendingCode:`Skickar...`,resendCode:`Skicka kod igen`,codeLabel:`Verifieringskod`,backupCodeLabel:`Reservkod`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Verifiera`,verifyingButton:`Verifierar...`,backToLogin:`← Tillbaka till inloggning`,orContinueWith:`eller fortsätt med`,signInWith:`Logga in med {{provider}}`,enterCode:`Ange verifieringskoden`,sendCodeFailed:`Kunde inte skicka verifieringskod`,invalidCode:`Ogiltig kod. Försök igen.`}},setup:{title:`Bambuddy-inställning`,subtitle:`Konfigurera autentisering för din Bambuddy-instans`,enableAuth:`Aktivera autentisering`,adminAccount:`Admin-konto`,adminAccountDesc:`Om admin-användare redan finns kommer autentisering att aktiveras med de befintliga admin-kontona. Lämna fälten nedan tomma för att använda befintliga admins, eller ange nya inloggningsuppgifter för att skapa en ny admin-användare.`,adminUsername:`Admin-användarnamn`,adminPassword:`Admin-lösenord`,optionalIfAdminExists:`(valfritt om admin-användare finns)`,adminUsernamePlaceholder:`Ange admin-användarnamn (valfritt)`,adminPasswordPlaceholder:`Ange admin-lösenord (valfritt)`,confirmPassword:`Bekräfta lösenord`,confirmPasswordPlaceholder:`Bekräfta admin-lösenord`,settingUp:`Ställer in...`,completeSetup:`Slutför inställning`,toast:{authEnabledAdminCreated:`Autentisering aktiverad och admin-användare skapad`,authEnabledExistingAdmins:`Autentisering aktiverad med befintliga admin-användare`,setupCompleted:`Inställning slutförd`,enterBothCredentials:`Ange både admin-användarnamn och lösenord, eller lämna båda tomma för att använda befintliga admin-användare`,passwordsDoNotMatch:`Lösenorden matchar ej`,passwordTooShort:`Lösenordet måste vara minst 6 tecken`}},changePassword:{title:`Ändra lösenord`,currentPassword:`Nuvarande lösenord`,currentPasswordPlaceholder:`Ange nuvarande lösenord`,newPassword:`Nytt lösenord`,newPasswordPlaceholder:`Ange nytt lösenord (minst 6 tecken)`,confirmPassword:`Bekräfta nytt lösenord`,confirmPasswordPlaceholder:`Bekräfta nytt lösenord`,passwordsDoNotMatch:`Lösenorden matchar ej`,passwordTooShort:`Lösenordet måste vara minst 6 tecken`,changing:`Ändrar...`,success:`Lösenord ändrat`,failed:`Kunde inte ändra lösenord`},plateAlert:{title:`Utskrift pausad!`,message:`Objekt upptäckta på byggplattan. Utskriften har pausats automatiskt. Töm plattan och fortsätt utskriften.`,understand:`Jag förstår`},camera:{title:`Kameravy`,invalidPrinterId:`Ogiltigt skrivar-ID`,live:`Live`,snapshot:`Ögonblicksbild`,restartStream:`Starta om strömmen`,refreshSnapshot:`Uppdatera ögonblicksbild`,fullscreen:`Helskärm`,exitFullscreen:`Avsluta helskärm`,connectingToCamera:`Ansluter till kamera...`,capturingSnapshot:`Fångar ögonblicksbild...`,connectionLost:`Anslutning tappades`,connectionFailed:`Kunde inte ansluta till kamera`,reconnecting:`Återansluter om {{countdown}}s... (försök {{attempt}}/{{max}})`,reconnectNow:`Återanslut nu`,cameraUnavailable:`Kamera otillgänglig`,cameraUnavailableDesc:`Se till att skrivaren är påslagen och ansluten.`,noCamera:`Ingen kamera tillgänglig`,retry:`Försök igen`,cameraStream:`Kameraström`,zoomOut:`Zooma ut`,zoomIn:`Zooma in`,resetZoom:`Återställ zoom`,recording:`Spelar in`,startRecording:`Starta inspelning`,stopRecording:`Stoppa inspelning`,chamberLight:`Växla kammarljus`,unavailable:`Kamera ej tillgänglig`,diagnose:{button:`Diagnostisera`,modalTitle:`Kameradiagnostik`,running:`Kör diagnostik...`,runFailed:`Kunde inte köra diagnostik: {{error}}`,retry:`Kör igen`,stage:{tcp_reachable:`Nätverksåtkomlighet`,first_frame:`Bildtagning`,live_stream_active:`Liveström aktiv`},summary:{all_ok:`Kameran fungerar. Diagnostiken slutförde alla steg.`,live_stream_active_healthy:`Kameran strömmar för närvarande med nya bilder — ingen test nödvändig.`,printer_unreachable:`Skrivaren är ej nåbar. Kontrollera IP-adress, nätverksanslutning och att skrivaren är påslagen.`,camera_port_closed:`Skrivaren är nåbar men kameraporten är stängd. Se till att LAN-läge och utvecklarläge är aktiverade i skrivarinställningarna.`,no_frame:`Ansluten till kameran men inga bilder togs emot. Försök igen eller kontrollera att kameran är aktiverad i skrivarinställningarna.`,unknown_failure:`Kameradiagnostik misslyckades av okänd anledning. Kontrollera supportloggen för detaljer.`},meta:{protocol:`Protokoll`,port:`Port`,profile:`Profil`}}},groups:{title:`Grupphantering`,subtitle:`Hantera behörighetsgrupper för åtkomstkontroll`,backToSettings:`Tillbaka till inställningar`,createGroup:`Skapa grupp`,noPermission:`Du har inte behörighet att komma åt denna sida.`,system:`System`,noDescription:`Ingen beskrivning`,usersCount:`{{count}} användare`,permissionsCount:`{{count}} behörigheter`,edit:`Redigera`,delete:`Ta bort`,toast:{created:`Grupp skapad`,updated:`Grupp uppdaterad`,deleted:`Grupp borttagen`,enterGroupName:`Ange ett gruppnamn`},modal:{editGroup:`Redigera grupp`,createGroup:`Skapa grupp`,cancel:`Avbryt`,saving:`Sparar...`,creating:`Skapar...`,saveChanges:`Spara ändringar`},form:{groupName:`Gruppnamn`,groupNamePlaceholder:`Ange gruppnamn`,systemGroupWarning:`Systemgruppnamn kan inte ändras`,description:`Beskrivning`,descriptionPlaceholder:`Ange beskrivning (valfritt)`,permissions:`Behörigheter ({{count}} valda)`},deleteModal:{title:`Ta bort grupp`,message:`Är du säker på att du vill ta bort denna grupp? Användare i denna grupp kommer att förlora dessa behörigheter.`,confirm:`Ta bort grupp`},editor:{title:`Redigera grupp`,createTitle:`Skapa grupp`,search:`Sök behörigheter...`,selectAll:`Markera alla`,clearAll:`Avmarkera alla`,permissionsSelected:`{{count}} valda`,noResults:`Inga behörigheter matchar din sökning`,websocketHint:`Krävs för liveuppdateringar. Utan det faller gränssnittet tillbaka på periodisk avfrågning.`}},users:{title:`Användarhantering`,subtitle:`Hantera användare och deras åtkomst till din Bambuddy-instans`,backToSettings:`Tillbaka till inställningar`,createUser:`Skapa användare`,noPermission:`Du har inte behörighet att komma åt denna sida.`,admin:`Admin`,noGroups:`Inga grupper`,active:`Aktiv`,inactive:`Inaktiv`,edit:`Redigera`,delete:`Ta bort`,system:`System`,noGroupsAvailable:`Inga grupper tillgängliga`,table:{username:`Användarnamn`,groups:`Grupper`,status:`Status`,actions:`Åtgärder`},toast:{created:`Användare skapad`,updated:`Användare uppdaterad`,deleted:`Användare borttagen`,fillRequired:`Fyll i alla obligatoriska fält`,passwordsDoNotMatch:`Lösenorden matchar ej`,passwordTooShort:`Lösenordet måste vara minst 6 tecken`,ldapProvisioned:`LDAP-användare "{{username}}" skapad`},modal:{createUser:`Skapa användare`,editUser:`Redigera användare`,cancel:`Avbryt`,creating:`Skapar...`,saving:`Sparar...`,saveChanges:`Spara ändringar`,advancedAuthSubtitle:`med avancerad autentisering`,tabsAriaLabel:`Användarkälla`,localTab:`Lokal`,ldapTab:`LDAP`,ldapSearchLabel:`Sök katalog`,ldapSearchPlaceholder:`Ange användarnamn, namn eller e-post...`,ldapMinChars:`Ange minst 2 tecken för att söka`,ldapTypeToSearch:`Börja skriva för att söka i LDAP-katalogen`,ldapSearching:`Söker i katalog...`,ldapNoResults:`Inga matchande användare i katalogen`,ldapSearchError:`Katalogsökning misslyckades. Kontrollera LDAP-serverstatus.`,ldapAlreadyProvisioned:`Redan skapad`,ldapSelectedLabel:`Valda`,ldapProvision:`Skapa användare`,ldapProvisioning:`Skapar...`,ldapErrorProvision:`Kunde inte skapa användare. Kontrollera LDAP-serverstatus och försök igen.`},form:{username:`Användarnamn`,usernamePlaceholder:`Ange användarnamn`,email:`E-post`,emailPlaceholder:`användare@example.com`,password:`Lösenord`,passwordPlaceholder:`Ange lösenord`,confirmPassword:`Bekräfta lösenord`,confirmPasswordPlaceholder:`Bekräfta lösenord`,newPasswordPlaceholder:`Ange nytt lösenord`,confirmNewPasswordPlaceholder:`Bekräfta nytt lösenord`,leaveBlankToKeep:`lämna tomt för att behålla nuvarande`,groups:`Grupper`,optional:`valfritt`,autoGeneratedPassword:`Ett säkert lösenord kommer att genereras automatiskt och skickas via e-post till användaren.`,passwordManagedByAdvancedAuth:`Lösenordet hanteras av avancerad autentisering. Använd "Återställ lösenord" för att skicka ett nytt lösenord till användaren via e-post.`,resetPassword:`Återställ lösenord`,resettingPassword:`Återställer lösenord...`},deleteModal:{title:`Ta bort användare`,message:`Är du säker på att du vill ta bort denna användare? Denna åtgärd kan inte ångras.`,confirm:`Ta bort användare`}},streamOverlay:{title:`Strömöverlägg`,invalidPrinterId:`Ogiltigt skrivar-ID`,cameraStream:`Kameraström`,progress:`Förlopp`,eta:`Beräknad tid`,printerIdle:`Skrivaren är inaktiv`,printerOffline:`Skrivare offline`,builder:{title:`Strömningsöverlägg`,description:`Bygg URL:en för ett strömningsöverlägg — en helskärmskameravy med live utskriftsdata som visas ovanpå. Välj de fält du vill ha och kopiera URL:en.`,printer:`Skrivare`,size:`Textstorlek`,sizeSmall:`Liten`,sizeMedium:`Mellanstor`,sizeLarge:`Stor`,fps:`Bildfrekvens`,fpsHint:`A1- och P1-kameror når upp till cirka 5 fps oavsett vad du anger.`,token:`Strömningsöverläggs-token (valfritt)`,tokenHint:`Krävs endast när inloggning är aktiverad: OBS har ingen egen session. Skapa en ovan med strömningsöverläggsomfång.`,tokenWarning:`Denna URL innehåller en token — vem som helst som kan läsa den kan titta på strömmen och se filnamnet. Återkalla token för att blockera den.`,fields:`Fält att visa`,fieldPrinter:`Skrivarnamn`,fieldFilename:`Filnamn`,fieldStatus:`Status`,fieldProgress:`Förloppsindikator`,fieldLayers:`Antal skikt`,fieldEta:`Återstående tid och beräknad tid`,fieldCamera:`Kameramatning`,chamberHint:`Kammartemperatur visas endast på modeller med en riktig kammarsensor — P1- och A1-skrivare rapporterar ett meningslöst värde, så det utelämnas där.`,urlTitle:`Överläggs-URL`,open:`Öppna`,showPreview:`Visa förhandsvisning`,hidePreview:`Dölj förhandsvisning`,previewTitle:`Förhandsvisning av överlägg`},status:{printing:`Skriver ut`,paused:`Pausad`,finished:`Slutförd`,failed:`Misslyckad`,idle:`Inaktiv`,unknown:`Okänd`}},profiles:{title:`Profiler`,subtitle:`Hantera dina slicer-inställningar och tryckkalibreringar`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Lokala profiler`,kprofiles:`K-profiler`},orcaCloud:{connectedAs:`Ansluten som`,connectedShort:`Ansluten till Orca Cloud`,logout:`Koppla från`,noLogoutPermission:`Du har inte behörighet att koppla från`,noConnectPermission:`Du har inte behörighet att ansluta till Orca Cloud`,retry:`Försök igen`,connectButton:`Anslut till Orca Cloud`,connect:{title:`Anslut till Orca Cloud`,description:`Logga in på ditt Orca Cloud-konto för att synkronisera dina slicer-profiler till Bambuddy.`},device:{title:`Godkänn Bambuddy i Orca Cloud`,instruction:`Öppna Orca Cloud och godkänn denna kod. Bambuddy ansluter automatiskt när du godkänner.`,codeLabel:`Din parningskod`,openButton:`Öppna Orca Cloud-godkänningssida`,manualHint:`Eller gå till {{url}} och ange koden ovan.`,waiting:`Väntar på att du godkänner...`,cancel:`Avbryt`},profiles:{title:`Dina Orca Cloud-profiler ({{count}})`,refresh:`Uppdatera`,empty:`Inga profiler hittade i ditt Orca Cloud-konto än.`},toast:{disconnected:`Kopplad från Orca Cloud`},errors:{startFailed:`Kunde inte starta Orca Cloud-parning.`,denied:`Parningen nekades i Orca Cloud.`,expired:`Parningskoden har löpt ut. Klicka på Anslut för att försöka igen.`,pollFailed:`Förlorade anslutningen medan vi väntade på godkännande. Försök igen.`}},localProfiles:{title:`Lokala profiler`,subtitle:`Importera och hantera slicer-inställningar från OrcaSlicer`,import:`Importera profiler`,importDesc:`Släpp .bbscfg, .bbsflmt, .orca_filament, .zip eller .json-filer här`,importing:`Importerar...`,search:`Sök lokala förinställningar...`,noPresets:`Inga lokala förinställningar än`,noSearchResults:`Inga förinställningar matchar din sökning`,badge:`Lokal`,edit:`Redigera`,delete:`Ta bort`,cancel:`Avbryt`,deleteConfirmTitle:`Ta bort förinställning`,deleteConfirm:`Är du säker på att du vill ta bort denna förinställning? Detta kan inte ångras.`,source:`Källa`,inheritsFrom:`Ärver`,filamentType:`Typ`,vendor:`Leverantör`,compatiblePrinters:`Skrivare`,nozzleTemp:`Munstyckstemperatur`,cost:`Kostnad`,density:`Densitet`,pressureAdvance:`Tryckförskott`,filament:`Filament`,process:`Process`,printer:`Skrivare`,toast:{importSuccess:`{{count}} förinställning(ar) importerade`,importSkipped:`{{count}} förinställning(ar) hoppade över (dubbletter)`,importError:`{{count}} fel under import`,deleted:`Förinställning borttagen`,updated:`Förinställning uppdaterad`}},connectedAs:`Ansluten som`,signInExpiredTitle:`Bambu Cloud-inloggning har löpt ut`,signInExpiredBody:`Bambu Lab accepterar inte längre lagrad token. Logga in igen för att återställa molnprofiler, MakerWorld-import och firmware-kontroller.`,logout:`Logga ut`,noLogoutPermission:`Du har inte behörighet att logga ut`,failedToLoad:`Kunde inte ladda profiler`,retry:`Försök igen`,time:{justNow:`Just nu`,minsAgo:`{{count}}m sedan`,hoursAgo:`{{count}}t sedan`,daysAgo:`{{count}}d sedan`},toast:{loggedOut:`Utloggad`},login:{title:`Anslut till Bambu Cloud`,subtitle:`Synkronisera dina slicer-inställningar över enheter`,email:`E-post`,password:`Lösenord`,region:`Region`,regionGlobal:`Global`,regionChina:`Kina`,verificationCode:`Verifieringskod`,totpCode:`Autentiseringskod`,checkEmail:`Kontrollera din e-post ({{email}}) för en 6-siffrig kod`,enterTotpHint:`Ange den 6-siffriga koden från din autentiseringsapp`,accessToken:`Åtkomsttoken`,accessTokenHint:`Klistra in din Bambu Cloud-åtkomsttoken. Konton i Kina måste använda denna metod (telefonbundet — e-postinloggning ej tillgänglig). Se wikin för hur du hämtar token från MakerWorld-cookies.`,back:`Tillbaka`,loginButton:`Logga in`,verifyButton:`Verifiera`,setTokenButton:`Sätt token`,useToken:`Använd åtkomsttoken istället`,captchaTitle:`Bambu Cloud begär en CAPTCHA`,captchaBody:`Bambu utmanar ditt nätverk innan det accepterar en inloggning, och utmaningen kan inte besvaras från Bambuddy. Ditt e-post och lösenord är inte problemet. Blockeringen är kopplad till din offentliga IP-adress och brukar lösa sig själv inom några timmar — upprepade försök gör att den varar längre. För att logga in nu, använd en åtkomsttoken från en webbläsarsession istället.`,useEmail:`Logga in med e-post istället`,toast:{loggedIn:`Inloggad`,codeSent:`Verifieringskod skickad till din e-post`,enterTotp:`Ange kod från din autentiseringsapp`,tokenSet:`Token inställd`}},presets:{myPreset:`Min förinställning (redigerbar)`,duplicate:`Duplicera`,editable:`Redigerbar`,failedToLoadDetails:`Kunde inte ladda förinställningsdetaljer`,deleteConfirm:`Ta bort denna förinställning?`,deleteWarning:`Detta kommer permanent ta bort "{{name}}" från Bambu Cloud. Detta kan inte ångras.`,noDuplicatePermission:`Du har inte behörighet att duplicera förinställningar`,noEditPermission:`Du har inte behörighet att redigera förinställningar`,noDeletePermission:`Du har inte behörighet att ta bort förinställningar`,types:{filament:`Filamentförinställning`,printer:`Skrivarförinställning`,process:`Processförinställning`},toast:{deleted:`Förinställning borttagen`,created:`Förinställning skapad`,updated:`Förinställning uppdaterad`,duplicated:`Förinställning duplicerad`,fieldAdded:`Fält "{{key}}" tillagt`,exported:`Förinställning exporterad`},baseLabel:`Bas: {{name}}`,currentLabel:`Nuvarande: {{name}}`,newPreset:`Ny förinställning`,editPreset:`Redigera förinställning`,duplicatePreset:`Duplicera förinställning`,createNewPreset:`Skapa ny förinställning`,customizeSettings:`Anpassa inställningar för din nya förinställning`,compareWithBase:`Jämför med basförinställning`,compare:`Jämför`,basePreset:`Basförinställning`,selectBasePreset:`Välj basförinställning...`,presetName:`Förinställningsnamn`,myCustomPreset:`Min anpassade förinställning`,inheritsFrom:`Ärver`,dropJsonToImport:`Släpp JSON för att importera`,tabs:{common:`Allmänna`,allFields:`Alla fält`},availableFields:`Tillgängliga fält`,searchFieldsPlaceholder:`Sök fält...`,noMatchingFields:`Inga matchande fält`,allFieldsAdded:`Alla fält tillagda`,addCustomField:`Lägg till anpassat fält`,yourOverrides:`Dina åsidosättningar`,noOverridesYet:`Inga åsidosättningar än`,clickFieldsToAdd:`Klicka på fält till vänster för att lägga till dem`,saveAsTemplate:`Spara som mall`,jsonTip:`Tips: Dra och släpp en .json-fil var som helst i denna modal för att importera inställningar`},cloudView:{searchPlaceholder:`Sök förinställningar...`,templates:`Mallar`,refresh:`Uppdatera`,newPreset:`Ny förinställning`,clearFilters:`Rensa filter`,compareMode:`Jämförelseläge`,selectAnotherPreset:`Välj en annan {{type}}-förinställning`,clickTwoPresets:`Klicka på två förinställningar av samma typ för att jämföra`,selectFirst:`1. Välj första`,selectSecond:`2. Välj andra`,compareNow:`Jämför nu`,lastSynced:`Senast synkroniserad:`,showingCount:`Visar {{showing}} av {{total}} förinställningar`,noPresetsFound:`Inga förinställningar hittade`,columns:{filament:`Filament`,process:`Process`,printer:`Skrivare`},noFilamentPresets:`Inga filamentförinställningar`,noProcessPresets:`Inga processförinställningar`,noPrinterPresets:`Inga skrivarförinställningar`,filters:{type:`Typ`,owner:`Ägare`,printer:`Skrivare`,nozzle:`Munstycke`,filament:`Filament`,layer:`Skikt`,all:`Alla`,myPresets:`Mina förinställningar`,builtIn:`Inbyggda`,process:`Process`},noTemplatesPermission:`Du har inte behörighet att hantera mallar`,noRefreshPermission:`Du har inte behörighet att uppdatera profiler`,noCreatePermission:`Du har inte behörighet att skapa förinställningar`},templates:{title:`Snabbmallar`,noTemplates:`Inga mallar än`,createFirst:`Skapa mallar från förinställningseditorn`,typeFilter:`Typ:`,deleteTitle:`Ta bort mall`,deleteWarning:`Denna åtgärd kan inte ångras`,deleteConfirm:`Är du säker på att du vill ta bort "{{name}}"?`,namePlaceholder:`Mallnamn`,descriptionPlaceholder:`Beskrivning`,settingsJson:`Inställningar (JSON)`,fieldsCount:`{{count}} fält`,shownInModals:`Visas i modaler`,hiddenInModals:`Dold i modaler`,apply:`Tillämpa`,toast:{deleted:`Mall borttagen`,updated:`Mall uppdaterad`,created:`Mall skapad`,applied:`Mall tillämpad`}}},support:{debugLoggingActive:`Felsökningsloggning är aktiv`,manageLogs:`Hantera`,collectItem7:`Skrivaranslutning och firmwareversioner`,collectItem8:`Integrationsstatus (Spoolman, MQTT, HA)`,collectItem9:`Nätverksgränssnitt (endast subnät)`,collectItem10:`Python-paketversioner`,collectItem11:`Databashälsokontroller`,collectItem12:`Docker-miljödetaljer`,bundleGenerating:`Genererar paket...`,bundleStepConnection:`Kör skrivaranslutningskontroller`,bundleStepVirtualPrinters:`Kör kontroll av virtuella skrivare`,bundleStepLogScan:`Söker i senaste loggar efter kända problem`,bundleStepBuild:`Bygger supportpaket-ZIP`},fileManager:{variants:{badge:`{{count}} versioner`,groupAction:`Gruppera som versioner`,groupTooltip:`Markera dessa filer som samma jobb slicade för olika skrivare`,grouped:`Grupperade {{count}} filer som versioner`,printAlternatives:`Skriv ut ({{count}} alternativ)`},title:`Filhanterare`,subtitle:`Organisera och hantera dina utskriftsfiler`,uploadFiles:`Ladda upp filer`,newFolder:`Ny mapp`,folderName:`Mappnamn`,folderNamePlaceholder:`t.ex. Funktionella delar`,renameFile:`Döp om fil`,renameFolder:`Döp om mapp`,invalidFilenameChar:`Tecknet "{{char}}" är inte tillåtet i utskriftsfilnamn. Skrivarens SD-kort avvisar: < > : " / \\ | ? *`,moveFiles:`Flytta {{count}} fil(er)`,rootNoFolder:`Rot (ingen mapp)`,current:`nuvarande`,linkFolder:`Länka mapp`,linkFolderDescription:`Länka "{{name}}" till ett projekt eller arkiv för snabb åtkomst.`,project:`Projekt`,archive:`Arkiv`,noProjectsFound:`Inga projekt hittade`,noArchivesFound:`Inga arkiv hittade`,unlink:`Avlänka`,link:`Länka`,dragDropFiles:`Dra och släpp filer här`,dropFilesHere:`Släpp filer här`,releaseToUpload:`Släpp för att ladda upp`,orClickToBrowse:`eller klicka för att bläddra`,allFileTypesSupported:`Alla filtyper stöds. ZIP-filer kommer att packas upp.`,zipFilesDetected:`ZIP-filer upptäckta`,zipExtractOptions:`ZIP-filer kommer att packas upp. Välj hur du vill hantera mappstrukturen:`,preserveZipStructure:`Bevara mappstruktur från ZIP`,createFolderFromZip:`Skapa mapp från ZIP-filnamn`,stlThumbnailGeneration:`Generering av STL-minibilder`,zipMayContainStl:`ZIP-filer kan innehålla STL-filer. Minibilder kan genereras under extraktion.`,thumbnailsCanBeGenerated:`Minibilder kan genereras för STL-filer. Stora modeller kan ta längre tid att bearbeta.`,generateThumbnailsForStl:`Generera minibilder för STL-filer`,threemfDetected:`3MF-filer upptäckta`,threemfExtractionInfo:`Skrivarmodell, material, färg och utskriftsinställningar kommer automatiskt att extraheras från 3MF-filer.`,willBeExtracted:`Kommer att extraheras`,filesExtracted:`{{count}} filer extraherade`,uploadComplete:`Uppladdning slutförd: {{succeeded}} lyckades`,uploadFailed:`Kunde inte ladda upp`,zipFilesFailed:`{{count}} filer misslyckades`,uploading:`Laddar upp...`,changeLink:`Ändra länk...`,linkTo:`Länka till...`,linkToProjectOrArchive:`Länka till projekt eller arkiv`,generateThumbnail:`Generera minibild`,generateThumbnails:`Generera minibilder`,generateThumbnailsForMissing:`Generera minibilder för STL-filer som saknar dem`,gridView:`Rutnätsvy`,listView:`Listvy`,lowDiskSpaceWarning:`Varning för lågt diskutrymme`,lowDiskSpaceDetails:`Endast {{free}} ledigt av {{total}} totalt. Tröskelvärdet är inställt på {{threshold}} GB i inställningar.`,files:`Filer`,folders:`Mappar`,size:`Storlek`,free:`Ledigt`,allFiles:`Alla filer`,allExternal:`Externa`,externalIsEmpty:`Inga externa filer`,externalEmptyDescription:`Filer i dina länkade externa mappar kommer att visas här.`,wrap:`Radbryt`,enableTextWrapping:`Aktivera radbrytning`,disableTextWrapping:`Inaktivera radbrytning`,collapse:`Fäll in`,collapseFoldersByDefault:`Fäll in mappar som standard`,expandFoldersByDefault:`Fäll ut mappar som standard`,folderSort:`Sortera mappar`,folderSortByName:`Efter namn`,folderSortByActivity:`Efter senaste aktivitet`,dragToResizeTooltip:`Dra för att ändra storlek, dubbelklicka för att återställa`,searchFiles:`Sök filer...`,searchSubfoldersHint:`Inklusive undermappar`,readme:{truncated:`Avkortad`,show:`Visa README`,hide:`Dölj README`,label:`README`},tags:{title:`Taggar`,subtitle:`Märk filer för tvärgående filtrering — leksaker, barnsäkra, endast PETG, vad som helst.`,manage:`Taggar`,manageTitle:`Hantera taggkatalog`,add:`Ny tagg`,edit:`Döp om tagg`,name:`Namn`,fileCount:`Filer`,empty:`Inga taggar än. Skapa en för att börja märka filer.`,noMatches:`Inga matchande taggar.`,createPlaceholder:`t.ex. leksaker, barnsäkra, petg`,createButton:`Skapa`,nameRequired:`Namn krävs.`,searchPlaceholder:`Filtrera taggar...`,created:`Tagg skapad.`,updated:`Tagg omdöpt.`,deleted:`Tagg borttagen.`,saveFailed:`Kunde inte spara tagg.`,deleteFailed:`Kunde inte ta bort tagg.`,applyFailed:`Kunde inte tillämpa taggar.`,applyAdd:`Lägg till taggar`,applyRemove:`Ta bort taggar`,applyAddSuccess:`Lade till {{count}} tagg(ar) på {{files}} fil(er).`,applyRemoveSuccess:`Tog bort {{count}} tagg(ar) från {{files}} fil(er).`,actionAdd:`Lägg till på valda filer`,actionRemove:`Ta bort från valda filer`,tagAction:`Tagg`,bulkTitle:`Tagga {{count}} valda fil(er)`,bulkTooltip:`Lägg till eller ta bort taggar på alla valda filer.`,noPermission:`Du har inte behörighet att tagga filer.`,filterLabel:`Filtrerar efter:`,clearAll:`Rensa alla`,confirmDelete:`Ta bort tagg "{{name}}"?`,confirmDeleteMessage:`Detta tar bort taggen från katalogen. Filerna behåller sina andra taggar.`,confirmDeleteInUseMessage:`Denna tagg används på {{count}} fil(er). Om du tar bort den kommer taggen att tas bort från alla filer; själva filerna påverkas ej.`,editAria:`Redigera {{name}}`,deleteAria:`Ta bort {{name}}`},allTypes:`Alla typer`,prints:`Utskrifter`,ascending:`Stigande`,descending:`Fallande`,showModified:`Visa ändringsdatum`,hideModified:`Dölj ändringsdatum`,lastModified:`Senast ändrad`,lastActivity:`Senaste aktivitet`,resultsCount:`Visar {{showing}} av {{total}} filer`,selectAll:`Markera alla`,deselectAll:`Avmarkera alla`,selected:`{{count}} valda`,adding:`Lägger till...`,loadingFiles:`Laddar filer...`,folderIsEmpty:`Mappen är tom`,noFilesYet:`Inga filer än`,folderEmptyDescription:`Ladda upp filer eller flytta filer till denna mapp för att komma igång.`,noFilesDescription:`Ladda upp filer för att börja organisera dina utskriftsrelaterade filer.`,noMatchingFiles:`Inga matchande filer`,noMatchingFilesDescription:`Inga filer matchar din aktuella sökning eller filterkriterier.`,clearFilters:`Rensa filter`,printedCount:`Utskrivet {{count}} gånger`,uploadedBy:`Uppladdad av`,deleteFolder:`Ta bort mapp`,deleteFile:`Ta bort fil`,deleteFilesCount:`Ta bort {{count}} filer`,deleteFolderConfirm:`Är du säker på att du vill ta bort denna mapp? Alla filer inuti kommer också att tas bort.`,deleteFileConfirm:`Är du säker på att du vill ta bort denna fil?`,deleteFilesConfirm:`Är du säker på att du vill ta bort {{count}} valda filer? Denna åtgärd kan inte ångras.`,deleting:`Tar bort...`,noPermissionRenameFolder:`Du har inte behörighet att döpa om mappar`,noPermissionLinkFolder:`Du har inte behörighet att länka mappar`,noPermissionDeleteFolder:`Du har inte behörighet att ta bort mappar`,onlyEmptyFoldersDeletable:`Du kan endast ta bort tomma mappar`,noPermissionPrint:`Du har inte behörighet att skriva ut`,noPermissionAddToQueue:`Du har inte behörighet att lägga till i kö`,noPermissionSlice:`Du har inte behörighet att slica filer`,noPermissionDownload:`Du har inte behörighet att ladda ner filer`,noPermissionPreview:`Du har inte behörighet att förhandsgranska filer`,preview3d:`3D-förhandsgranskning`,noPermissionRenameFile:`Du har inte behörighet att döpa om denna fil`,noPermissionGenerateThumbnail:`Du har inte behörighet att generera minibilder`,noPermissionDeleteFile:`Du har inte behörighet att ta bort denna fil`,noPermissionCreateFolder:`Du har inte behörighet att skapa mappar`,noPermissionUpload:`Du har inte behörighet att ladda upp filer`,noPermissionMoveFiles:`Du har inte behörighet att flytta filer`,noPermissionDeleteFiles:`Du har inte behörighet att ta bort filer`,linkExternal:`Länka extern`,linkExternalFolder:`Länka extern mapp`,linkExternalFolderDescription:`Montera en värdkatalog (NAS, USB, nätverksdelning) i Filhanteraren. Filerna kopieras inte — de nås direkt från den ursprungliga sökvägen.`,externalFolderNamePlaceholder:`t.ex. NAS-utskrifter`,externalPath:`Värdsökväg`,externalPathHelp:`Absolut sökväg till katalogen på Docker-värden. Måste vara bind-monterad i containern.`,readOnly:`Skrivskyddad`,readOnlyHelp:`förhindrar uppladdningar och borttagningar`,showHiddenFiles:`Visa dolda filer (doldfiler)`,externalFolder:`Extern mapp`,scanFolder:`Sök`,toast:{folderCreated:`Mapp skapad`,openInSlicerFailed:`Kunde inte öppna i slicer`,folderDeleted:`Mapp borttagen`,fileDeleted:`Fil borttagen`,filesDeleted:`Tog bort {{count}} filer`,filesMoved:`Filer flyttade`,folderLinked:`Mapp länkad`,folderUnlinked:`Mapp avlänkad`,externalFolderLinked:`Extern mapp länkad och skannad`,folderScanned:`Skanning slutförd: {{added}} tillagda, {{removed}} borttagna`,addedToQueue:`Lade till {{count}} fil(er) i kön`,addedToQueuePartial:`Lade till {{added}} fil(er), {{failed}} misslyckades`,failedToAddToQueue:`Kunde inte lägga till filer: {{error}}`,fileRenamed:`Fil omdöpt`,folderRenamed:`Mapp omdöpt`,thumbnailsGenerated:`Genererade {{count}} minibild(er)`,thumbnailsGeneratedPartial:`Genererade {{succeeded}} minibild(er), {{failed}} misslyckades`,noStlMissingThumbnails:`Inga STL-filer saknar minibilder`,failedToGenerateThumbnails:`Kunde inte generera minibilder: {{error}}`,thumbnailGenerated:`Minibild genererad`,failedToGenerateThumbnail:`Kunde inte generera minibild: {{error}}`}},projects:{parentLabel:`Överordnat projekt`,parentNone:`Ingen (toppnivåprojekt)`,parentHint:`Placera detta projekt under ett annat så att dess siffror rullas upp i ett huvudprojekt`,partOf:`Del av {{name}}`,subProjectCount:`{{count}} delprojekt`,subProjectsOf:`Delprojekt till {{name}}`,collapseSubProjects:`Fäll in delprojekt`,expandSubProjects:`Fäll ut delprojekt`,title:`Projekt`,subtitle:`Organisera och spåra dina 3D-utskriftsprojekt`,newProject:`Nytt projekt`,editProject:`Redigera projekt`,deleteProject:`Ta bort projekt`,projectName:`Projektnamn`,description:`Beskrivning`,noProjects:`Inga projekt än`,noProjectsFiltered:`Inga {{status}}-projekt`,noProjectsFilteredHelp:`Du har inga {{status}}-projekt. Projekt kommer att visas här när deras status ändras.`,createFirst:`Skapa ditt första projekt för att börja organisera relaterade utskrifter, spåra framsteg och hantera dina byggen.`,createFirstButton:`Skapa ditt första projekt`,create:`Skapa`,files:`Filer`,prints:`Utskrifter`,plates:`plattor`,parts:`delar`,lastModified:`Senast ändrad`,deleteConfirm:`Är du säker på att du vill ta bort detta projekt? Arkiv och köposter kommer att avlänkas men inte tas bort.`,addFiles:`Lägg till filer`,removeFile:`Ta bort fil`,viewDetails:`Visa detaljer`,namePlaceholder:`t.ex. Voron 2.4 bygge`,descriptionPlaceholder:`Valfri beskrivning...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URL måste börja med http:// eller https://`,openExternalUrl:`Öppna projekt-URL`,coverImageLabel:`Omslagsbild`,coverImageAlt:`Projektomslagsbild`,coverImageUpload:`Ladda upp`,coverImageReplace:`Ersätt`,coverImageRemove:`Ta bort`,color:`Färg`,targetPlates:`Målplattor`,targetPlatesPlaceholder:`t.ex. 25`,targetPlatesHelp:`Antal utskriftsjobb`,targetParts:`Måldelar`,targetPartsPlaceholder:`t.ex. 150`,targetPartsHelp:`Totalt antal objekt som behövs`,targetSets:`Kopior per fil`,targetSetsPlaceholder:`t.ex. 10`,targetSetsHelp:`Antal gånger varje utskriftsbar fil ska skrivas ut`,tagsLabel:`Taggar (komma-separerade)`,tagsPlaceholder:`t.ex. voron, funktionella, present`,dueDate:`Förfallodatum`,priority:`Prioritet`,priorityLow:`Låg`,priorityNormal:`Normal`,priorityHigh:`Hög`,priorityUrgent:`Brådskande`,statusActive:`Aktivt`,statusCompleted:`Slutfört`,statusArchived:`Arkiverat`,done:`Klar`,completed:`slutförd`,failed:`misslyckad`,inQueue:`i kö`,noPrintsYet:`Inga utskrifter än`,printJobs:`Utskriftsjobb (plattor)`,partsPrinted:`Delar utskrivna`,failedParts:`Misslyckade delar`,import:`Importera`,export:`Exportera`,importProject:`Importera projekt`,exportAll:`Exportera alla projekt`,loading:`Laddar projekt...`,noEditPermission:`Du har inte behörighet att redigera projekt`,noDeletePermission:`Du har inte behörighet att ta bort projekt`,noCreatePermission:`Du har inte behörighet att skapa projekt`,noImportPermission:`Du har inte behörighet att importera projekt`,noExportPermission:`Du har inte behörighet att exportera projekt`,toast:{created:`Projekt skapat`,updated:`Projekt uppdaterat`,deleted:`Projekt borttaget`,imported:`Projekt importerat`,multipleImported:`{{count}} projekt importerade`,importFailed:`Kunde inte importera`,exported:`Projekt exporterade (endast metadata)`}},projectDetail:{notFound:`Projekt hittades ej`,backToProjects:`Tillbaka till projekt`,export:`Exportera`,exportProject:`Exportera projekt`,noExportPermission:`Du har inte behörighet att exportera projekt`,noEditPermission:`Du har inte behörighet att redigera projekt`,partOf:`Del av:`,priorityLabel:`Prioritet:`,noPrints:`Inga utskrifter i detta projekt än`,status:{active:`Aktivt`,completed:`Slutfört`,archived:`Arkiverat`},priority:{low:`Låg`,normal:`Normal`,high:`Hög`,urgent:`Brådskande`},dueDate:{overdue:`Försenad`,today:`Förfaller idag`,daysLeft:`{{count}} dagar kvar`},progress:{platesProgress:`Plattförlopp`,partsProgress:`Delförlopp`,setsProgress:`Kompletta set`,sets:`set`,setsHint:`Ett set är komplett när varje utskriftsbar fil har nått detta antal`,printJobs:`utskriftsjobb`,parts:`delar`,percentComplete:`{{percent}}% klar`,remaining:`{{count}} återstående`},stats:{printJobs:`Utskriftsjobb`,total:`totalt`,failed:`{{count}} misslyckade`,partsPrinted:`{{count}} delar utskrivna`,printTime:`Utskriftstid`,filamentUsed:`Filament använt`},cost:{title:`Kostnadsspårning`,filamentCost:`Filamentkostnad`,energy:`Energi`,totalCost:`Uppskattad kostnad`,total:`Totalt`,includesBom:`inkl. BOM`,budget:`Budget`,remaining:`Återstående`},subProjects:{title:`Delprojekt ({{count}})`,jobs:`{{count}} jobb`},rollup:{title:`Inkluderar {{count}} delprojekt`,progress:`Total förlopp`,percentComplete:`{{percent}}% klar`},notes:{title:`Anteckningar`,noEditPermission:`Du har inte behörighet att redigera anteckningar`,placeholder:`Lägg till anteckningar om detta projekt...`,empty:`Inga anteckningar än. Klicka på Redigera för att lägga till anteckningar.`},files:{title:`Filer`,linkFolders:`Länka mappar från Filhanteraren`,forQuickAccess:`till detta projekt för snabb åtkomst.`,fileCount:`{{count}} fil(er)`,empty:`Inga mappar länkade. Gå till Filhanteraren och länka en mapp till detta projekt.`,printedCount:`Utskrivet {{count}} gång(er)`,progressTooltip:`{{done}} av {{target}} slutförda utskrifter`,noFiles:`Inga filer i denna mapp.`},bom:{title:`Materialförteckning`,acquired:`{{completed}}/{{total}} anskaffade`,showAll:`Visa alla`,hideDone:`Dölj klara`,addPart:`Lägg till del`,noAddPermission:`Du har inte behörighet att lägga till delar`,partNamePlaceholder:`Delnamn (t.ex. M3x8 skruvar)`,partName:`Delnamn`,qty:`Antal`,price:`Pris ({{currency}})`,sourcingUrlPlaceholder:`Inköps-URL (valfritt)`,remarksPlaceholder:`Anteckningar (valfritt)`,deletePart:`Ta bort del`,deleteConfirm:`Är du säker på att du vill ta bort "{{name}}"?`,noUpdatePermission:`Du har inte behörighet att uppdatera delar`,noEditPermission:`Du har inte behörighet att redigera delar`,noDeletePermission:`Du har inte behörighet att ta bort delar`,totalCost:`Total kostnad:`,empty:`Inga delar i materialförteckningen. Lägg till hårdvara, elektronik eller andra komponenter för att spåra vad som behöver anskaffas.`},timeline:{title:`Aktivitetstidslinje`,empty:`Ingen aktivitet än.`},template:{saveAsTemplate:`Spara som mall`,noCreatePermission:`Du har inte behörighet att skapa mallar`},queue:{title:`Kö`,viewAll:`Visa alla`,printing:`{{count}} skriver ut`,queued:`{{count}} i kö`},prints:{title:`Utskrifter ({{count}})`},toast:{projectUpdated:`Projekt uppdaterat`,partAdded:`Del tillagd`,partRemoved:`Del borttagen`,exportFailed:`Kunde inte exportera`,projectExported:`Projekt exporterat`,templateCreated:`Mall skapad`}},system:{title:`Systeminformation`,version:`Version`,uptime:`Driftstid`,cpuUsage:`CPU-användning`,memoryUsage:`Minnesanvändning`,diskUsage:`Diskanvändning`,networkInfo:`Nätverksinformation`,logs:`Loggar`,debugMode:`Felsökningsläge`,enableDebug:`Aktivera felsökningsloggning`,disableDebug:`Inaktivera felsökningsloggning`,downloadLogs:`Ladda ner loggar`,clearLogs:`Rensa loggar`,dockerInfo:`Docker-information`,containerName:`Container-namn`,imageName:`Avbildsnamn`,platform:`Plattform`,architecture:`Arkitektur`},sponsors:{sectionTitle:`Oberoende och community-finansierat`,tagline:`Bambuddy är gratis och förblir det tack vare att människor väljer att stödja det. Inga riskkapitalister, ingen molninlåsning.`,viewSupporters:`Visa supporters`,toastPrints:`Du har slutfört {{count}} utskrifter med Bambuddy. Bambuddy förblir gratis tack vare sina supporters.`,toastCost:`Du har spårat {{total}} i filament med Bambuddy. Se vilka som håller projektet oberoende.`,toastArchives:`{{count}} utskrifter arkiverade med Bambuddy. Se vilka som håller det oberoende.`,toastAnniversary:`Ett år med Bambuddy! Se vilka som håller projektet oberoende.`,toastVersionUpdate:`Uppdaterad till v{{version}}. Bambuddy förblir gratis tack vare sina supporters.`,toastBusiness:`Kör du Bambuddy på {{count}} skrivare? Det finns ett supportavtal för team — prioriterade åtgärder, fakturering och direktkontakt med underhållaren.`,businessCta:`Bambuddy för företag`,businessTitle:`Bambuddy för företag`,businessTagline:`Du kör {{count}} skrivare. Prioriterad support, kommersiell licensiering och fakturering är tillgängliga för team och utskriftsfarmar.`},library:{title:`Filamentbibliotek`,addFilament:`Lägg till filament`,editFilament:`Redigera filament`,deleteFilament:`Ta bort filament`,vendor:`Leverantör`,material:`Material`,color:`Färg`,kFactor:`K-faktor`,temperature:`Temperatur`,noFilaments:`Inga filament i biblioteket`,deleteConfirm:`Är du säker på att du vill ta bort detta filament?`,importFromPrinter:`Importera från skrivare`,exportToFile:`Exportera till fil`,runWithPipeline:{actionLabel:`Kör med pipeline`,noPermission:`Du har inte behörighet att köra pipelines`,modalTitle:`Kör med pipeline`,confirmTitle:`Bekräfta körning`,confirmIntro:`Förkontroll fann problem med denna körning`,sourceHint:`Källa`,pipelineHint:`Pipeline`,targetHint:`Mål`,pipelineListAria:`Tillgängliga pipelines`,runAnyway:`Kör ändå`,loading:`Laddar…`,empty:`Inga pipelines sparade än. Öppna slicing-dialogrutan och klicka på "Spara som pipeline" för att skapa en.`,noTarget:`Ingen målskrivare inställd`,noTargetMessage:`Denna pipeline har ingen målskrivare inställd. Öppna den i Inställningar för att välja en.`,copies:`Kopierar`,copiesHint:`max {{n}}`,classTarget:`Alla {{model}}`,toast:{started:`Pipeline-körning startad`,failed:`Kunde inte starta körning`},issue:{printerNotSet:`Ingen målskrivare inställd på denna pipeline.`,printerNotFound:`Målskrivaren finns inte längre.`,printerDisabled:`Målskrivaren är inaktiverad.`,printerOffline:`Målskrivaren är offline.`,filamentType:`Filament-fack {{slot}}: förväntade {{expected}}, AMS har {{actual}}`,filamentColor:`Filament-fack {{slot}}: färg skiljer sig (förväntad {{expected}}, AMS har {{actual}})`,amsSlotMissing:`AMS-fack {{slot}} inte tillgängligt på denna skrivare`,filamentUnverified:`Filament-fack {{slot}} kommer från en moln-/standardförinställning och kunde inte verifieras statiskt.`,noClassMatches:`Inga skrivare i denna installation matchar pipelines målskrivarklass ({{expected}}).`,classNotSet:`Pipeline-målet är inställt på en skrivarklass men ingen modell valdes.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Visar slicer-standardvärden: din slicer-sidecar är äldre än denna funktion och kan inte rapportera en förinställnings värden. Uppdatera sidecar-bilden för att se dem. Allt du inte ändrar använder fortfarande förinställningen.`,presetValuesNotConfigured:`Visar slicer-standardvärden: ingen slicer-sidecar är konfigurerad, så en förinställnings värden kan inte läsas. Allt du inte ändrar använder fortfarande förinställningen.`,presetValuesSidecarUnavailable:`Visar slicer-standardvärden: slicer-sidecaren svarade inte, så en förinställnings värden kan inte läsas. Allt du inte ändrar använder fortfarande förinställningen.`,presetValuesUnavailable:`Visar slicer-standardvärden: den valda förinställningens egna värden kunde inte läsas. Allt du inte ändrar använder fortfarande förinställningen.`,filamentDefault:`Standard`,fromFile:`från fil`,fromFileHint:`Designern ändrade detta i källfilen. Dess värde är {{value}}.`,fromFilePrinterCoupled:`designerns skrivare`,fromFilePrinterCoupledHint:`Optimerad för den skrivare denna fil designades för — kan vara fel eller utanför intervallet på din.`,fromFileOverridesPreset:`åsidosätter förinställning`,fromFileOverridesPresetHint:`Filen sätter detta till {{value}} där förinställningen du valde använder {{preset}}. Markera endast om filen ska gälla.`,useFromFile:`Använd källfilens värde för {{option}}`,otherFromFile:`Andra inställningar från denna fil`,fromFileSummary:`Designern ändrade {{count}} processinställningar i denna fil. Endast de du markerar används.`,fromFileUseAll:`Använd designerns inställningar`,fromFileUseAllHint:`Markerar inställningar som gäller över skrivare. De som är optimerade för designerns egen skrivare, och de som definierar förinställningen du valde, förblir avmarkerade.`,fromFileClear:`Rensa {{count}}`,loading:`Laddar slicer-inställningar…`,mode:{simple:`Enkel`,advanced:`Avancerad`,expert:`Expert`},searchPlaceholder:`Sök inställningar`,resetAll:`Återställ {{count}}`,resetOption:`Återställ till standard`,noMatches:`Inga inställningar matchar denna sökning.`},slice:{filamentSlotUnset:`inte inställt`,processSettingsEmbedded:`Används inte medan "Använd filens inbyggda inställningar" är på -- filens egna inställningar driver denna slicing.`,processSettingsInactive:`Inaktiv`,presetsHidden:`{{count}} dold`,showAllPresets:`Visa alla`,showFewerPresets:`Visa färre`,processSettings:`Processinställningar`,processSettingsHint:`Justera den valda förinställningen för denna slicing. Allt du inte rör förblir som förinställningen definierar det.`,processSettingsChanged:`{{count}} ändrades`,processSettingsUnchanged:`Standardförinställningar`,title:`Slica modell`,action:`Slica`,actionAll:`Slica alla {{count}} plattor`,actionAllTitle:`Slica varje platta till en enda flerplattsutskrift (ett enda arkiv). Filamentvalet täcker alla fack som projektet definierar.`,allPlatesToggle:`Slica alla {{count}} plattor`,slicing:`Slicar`,printer:`Skrivarprofil`,process:`Processprofil`,filament:`Filamentprofil`,filamentSlot:`Filament {{index}} ({{type}})`,filamentColour:`Filamentfärg`,selectPreset:`— Välj en förinställning —`,loadingPresets:`Laddar förinställningar…`,analyzingPlateFilaments:`Analyserar plattfilament…`,analyzingPlateFilamentsHint:`Kör en förhandsgransknings-slicing för att upptäcka vilka AMS-fack denna platta använder. Cachad efteråt — omöjligt att öppna igen.`,previewToast:`Analyserar {{name}} — {{elapsed}}`,previewWithProgress:`Analyserar {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— används inte av denna platta`,noPresetsForSlot:`Inga förinställningar tillgängliga`,otherPrinters:`Andra skrivare`,presetsLoadFailed:`Kunde inte ladda förinställningar. Öppna Inställningar → Profiler för att importera dem först.`,refreshPresets:`Uppdatera`,refreshPresetsTitle:`Uppdatera förinställningar — hämta de senaste moln- och buntade listorna (använd efter att ha tagit bort en förinställning i Bambu Studio eller Bambu Handy)`,allPresetsRequired:`Alla förinställningar måste väljas`,useEmbedded:`Använd filens inbyggda inställningar`,useEmbeddedHint:`Slica den på det sätt designern ställt in den (väggar, fyllning, filament) istället för profilerna ovan. Erbjuds eftersom din skrivare matchar filens.`,autoOrient:`Auto-orientera objekt`,autoOrientHint:`Låt slicern vända varje objekt till dess bästa utskriftssida först. Åsidosätter det sätt modellen lades ner i filen.`,autoArrange:`Auto-placera på plattan`,autoArrangeHint:`Låt slicern positionera objekten så att de inte längre överlappar. Ersätter layouten som filen kom med.`,enqueuing:`Skickar slicing-jobb…`,queued:`Köad…`,failed:`Slicing misslyckades. Kontrollera slicer-sidecar-loggarna.`,startedToast:`Slicar {{name}} i bakgrunden…`,queuedToast:`Köat: {{name}} — {{elapsed}}`,runningToast:`Slicar {{name}} — {{elapsed}}`,runningWithProgress:`{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,runningWithProgressMultiPlate:`Platta {{plateIndex}} av {{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,completedToast:`Slicad {{name}}`,externalWriteFallbackToast:`Sparad i det interna biblioteket: den externa mappen kunde inte skrivas till`,failedTitle:`Slicing misslyckades`,failedToast:`Slicing {{name}} misslyckades: {{detail}}`,tier:{local:`Importerad`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Standard`},cloud:{notAuthenticated:`Logga in på Bambu Cloud (Inställningar → Profiler → Bambu Cloud) för att se dina förinställningar i molnet.`,expired:`Bambu Cloud-session har löpt ut — logga in igen för att uppdatera dina förinställningar i molnet.`,unreachable:`Bambu Cloud är otillgänglig just nu. Lokala och standardförinställningar fungerar fortfarande.`},orcaCloud:{notAuthenticated:`Logga in på Orca Cloud (Profiler → Orca Cloud) för att se dina Orca-förinställningar.`,expired:`Orca Cloud-session har löpt ut — logga in igen för att uppdatera dina Orca-förinställningar.`,unreachable:`Orca Cloud är otillgänglig just nu. Andra förinställningar fungerar fortfarande.`},bedType:{label:`Byggplatta`,auto:`Auto (använd processförinställning)`,coolPlate:`Cool Plate`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Texturerad PEI-platta`,smoothPEI:`Slät PEI-platta`},pipelines:{label:`Pipeline`,applyAria:`Tillämpa pipeline`,applyPrompt:`Tillämpa pipeline…`,empty:`Inga sparade pipelines`,saveButton:`Spara som pipeline`,saveTitle:`Spara det aktuella fyrfacks-valet som en återanvändbar pipeline`,namePlaceholder:`Pipeline-namn`,nameAria:`Nytt pipeline-namn`,toast:{applied:`Tillämpade "{{name}}"`,saved:`Pipeline sparad`,saveFailed:`Kunde inte spara`}}},spoolman:{title:`Spoolman-integration`,enabled:`Spoolman aktiverad`,url:`Spoolman-URL`,connected:`Ansluten`,disconnected:`Inte ansluten`,testConnection:`Testa anslutning`,sync:`Synkronisera`,syncing:`Synkroniserar…`,lastSync:`Senaste synkronisering`,linkToSpoolman:`Länka till Spoolman`,openInSpoolman:`Öppna i Spoolman`,unlinkSpool:`Avlänka rulle`,unlinkConfirmTitle:`Avlänka rulle?`,unlinkConfirmMessage:`Detta kommer att ta bort rullen från detta fack. Rulldatan i sig kommer att förbli oförändrad.`,selectSpool:`Välj rulle`,noUnlinkedSpools:`Inga olänkade rullar tillgängliga`,linkSuccess:`Rulle tilldelad`,linkFailed:`Kunde inte tilldela rulle`,unlinkSuccess:`Rulle avlänkad`,unlinkFailed:`Kunde inte avlänka rulle`,linkedSpool:`Tilldelad rulle`,spoolId:`Rull-ID`,fillSourceLabel:`(Spoolman)`,weight:`Vikt`,remaining:`Återstående`,disableWeightSync:`Inaktivera AMS uppskattade vikt-synkronisering`,disableWeightSyncDesc:`Uppdatera inte återstående kapacitet från AMS-uppskattningar. Använd detta om du föredrar Spoolmans användningsspårning framför AMS-procentbaserade uppskattningar. Nya rullar kommer fortfarande att använda AMS-uppskattningen som sin initiala vikt.`,reportPartialUsage:`Rapportera partiell användning för misslyckade utskrifter`,reportPartialUsageDesc:`När en utskrift misslyckas eller avbryts, rapportera den uppskattade filamentanvändningen fram till den punkten baserat på skiktförloppet.`},locations:{title:`Lagringsplatser`,subtitle:`Hantera hyllor, lådor och andra fysiska lagringsplatser för dina rullar`,add:`Lägg till plats`,addShort:`Lägg till`,edit:`Redigera plats`,name:`Namn`,spools:`Rullar`,sensors:`Sensorer`,empty:`Inga lagringsplatser än. Skapa din första hylla eller låda.`,manage:`Platser`,createPlaceholder:`t.ex. Hylla A, Låda 1`,nameRequired:`Platsnamn krävs`,created:`Plats skapad`,updated:`Plats uppdaterad`,deleted:`Plats borttagen`,saveFailed:`Kunde inte spara plats`,deleteFailed:`Kunde inte ta bort plats`,deleteBlocked:`Ta bort alla rullar från denna plats innan du tar bort den`,confirmDelete:`Ta bort "{{name}}"?`,confirmDeleteMessage:`Denna plats kommer att tas bort från katalogen. Rullar måste flyttas först.`,confirmDeleteMessageWithSensors:`Denna plats kommer att tas bort från katalogen. Spolar måste flyttas först. Anslutna sensorer kommer också att raderas.`},inventory:{title:`Rullinventarium`,subtitle:`Hantera dina rullar`,addToInventory:`Lägg till i inventariet`,addToInventoryPending:`Lägger till…`,addToInventorySuccess:`Rulle tillagd i inventariet`,addToInventoryFailed:`Kunde inte lägga till rulle i inventariet`,unknownSpoolTitle:`Nytt filament upptäckt`,unknownSpoolMessage:`En rulle med en okänd RFID-tagg upptäcktes på {{location}}. Lägg till den i ditt inventarium nu?`,unknownSpoolSlot:`Fack`,bulk:{selectAllVisible:`Markera alla synliga`,selectRow:`Markera rad`,selectGroup:`Markera grupp`,selectionCount:`{{count}} valda`,edit:`Redigera`,printLabels:`Skriv ut etiketter`,resetUsage:`Återställ användning`,restore:`Återställ`,archive:`Arkivera`,delete:`Ta bort`,clearSelection:`Rensa val`,editTitle:`Massredigera rullar`,editSubtitle:`Tillämpas på {{count}} valda rullar. Endast de fält du markerar kommer att uppdateras.`,editHint:`Skriv i ett fält för att markera det för uppdatering — endast markerade rader skickas. Lämna ett fält tomt för att behålla rullarna oförändrade (rensning av fält är endast per rulle).`,useCustom:`Använd "{{value}}"`,toggleField:`Växla uppdatering för detta fält`,changeCount:`{{count}} fält kommer att uppdateras.`,applyPending:`Tillämpar…`,applyButton:`Tillämpa på {{count}} rullar`,deleteTitle:`Ta bort valda rullar`,archiveTitle:`Arkivera valda rullar`,restoreTitle:`Återställ valda rullar`,resetUsageTitle:`Återställ användning på valda rullar`,deleteMessage:`Ta bort {{count}} rullar permanent? Detta kan inte ångras.`,archiveMessage:`Arkivera {{count}} rullar? De kan återställas senare.`,restoreMessage:`Återställ {{count}} arkiverade rullar?`,resetUsageMessage:`Återställ "Totalt förbrukat"-räknaren på {{count}} rullar? Återstående vikt bevaras.`,updateSuccess:`{{count}} rullar uppdaterade`,updateFailed:`Kunde inte uppdatera`,updatePartial:`{{ok}} rullar uppdaterade, {{failed}} misslyckades`,updateAllFailed:`Alla {{count}} rulluppdateringar misslyckades — val bevaras så att du kan försöka igen`,deleteSuccess:`{{count}} rullar borttagna`,deleteFailed:`Kunde inte ta bort`,deletePartial:`{{ok}} rullar borttagna, {{failed}} misslyckades`,deleteAllFailed:`Alla {{count}} rullborttagningar misslyckades — val bevaras så att du kan försöka igen`,archiveSuccess:`{{count}} rullar arkiverade`,archiveFailed:`Kunde inte arkivera`,archivePartial:`{{ok}} rullar arkiverade, {{failed}} misslyckades`,archiveAllFailed:`Alla {{count}} rullarkiveringar misslyckades — val bevaras så att du kan försöka igen`,restoreSuccess:`{{count}} rullar återställda`,restoreFailed:`Kunde inte återställa`,restorePartial:`{{ok}} rullar återställda, {{failed}} misslyckades`,restoreAllFailed:`Alla {{count}} rullåterställningar misslyckades — val bevaras så att du kan försöka igen`,invalidHex:`Ange 6 hex-tecken (RRGGBB) eller 8 (RRGGBBAA). Fältet kommer inte att tillämpas annars.`},spoolmanMixedContentTitle:`Spoolman kan inte laddas över HTTPS — blandat innehåll blockeras av din webbläsare`,spoolmanMixedContentBody:`Bambuddy serveras över HTTPS (via din omvända proxy), men din Spoolman-URL är fortfarande vanlig HTTP. Webbläsare blockerar blandat innehåll av säkerhetsskäl, så det inbäddade Spoolman-gränssnittet kan inte renderas. Spoolman måste vara åtkomligt över HTTPS för att detta ska fungera.`,spoolmanMixedContentFixReverseProxy:`Placera Spoolman bakom samma omvända proxy som Bambuddy (Traefik / Nginx / Caddy) med HTTPS, uppdatera sedan Spoolman-URL:en i Inställningar till den nya HTTPS-adressen.`,spoolmanMixedContentFixOpenNewTab:`För en tillfällig lösning, öppna Spoolman i en ny webbläsarflik över HTTP — regler för blandat innehåll gäller endast för inbäddade ramar, så en fristående flik fungerar fortfarande.`,spoolmanOpenInNewTab:`Öppna Spoolman i en ny flik`,labels:{title:`Skriv ut rulletiketter`,selectedCount:`{{count}} valda`,pickSpools:`Välj vilka rullar du vill skriva ut etiketter för:`,monochrome:`Monokrom (svartvit skrivare)`,monochromeHint:`Tar bort färgprovet och breddar texten`,startingPosition:`Startposition för etikett`,startingPositionRange:`Endast arkmallar: L7160 stöder 1–21; 5160 stöder 1–30.`,startingPositionInvalid:`Ange ett heltal från 1 till {{capacity}}.`,startingPositionFirst:`Utskriften börjar vid position 1.`,startingPositionSkipped:`Positionerna 1 till {{lastPosition}} lämnas tomma på det första arket.`,startingPositionRangeError:`Startpositionen måste vara mellan 1 och {{capacity}} för detta ark.`,searchPlaceholder:`Sök namn, märke eller #ID`,filterByMaterial:`Material:`,allMaterials:`Alla`,selectVisible:`Markera alla synliga ({{count}})`,deselectVisible:`Avmarkera synliga`,clearAll:`Rensa alla`,noSpoolsToShow:`Inga rullar att visa. Justera ditt filter och försök igen.`,noMatches:`Inga rullar matchar den aktuella sökningen eller filtren.`,printOne:`Skriv ut etikett för denna rulle`,printLabels:`Skriv ut etiketter…`,bulkTitle:`Välj rullar för att skriva ut etiketter från de {{count}} som visas`,noSpoolsTitle:`Inga rullar att göra etikett för`,error:`Kunde inte generera etiketter: {{msg}}`,sortBy:{label:`Sortera:`,id:`Efter ID`,color:`Efter färg`},templates:{amsHolderSmall:{label:`AMS-hållare — liten (74 × 33 mm)`,hint:`En etikett per sida; matchar den utskrivbara etiketten från MakerWorld-modell 752566 (AMS Filament Label Holder).`},amsHolderLarge:{label:`AMS-hållare — stor (75 × 55 mm)`,hint:`En etikett per sida; passar varianten med pappersinsats av AMS Filament Label Holder. Tillräckligt med utrymme för färgprov, märke, material, ID och QR-kod.`},box40x30:{label:`Lådetikett (40 × 30 mm)`,hint:`En etikett per sida; vanlig DK/Brother-rullstorlek, bra för filamentpåse- och lagringslådetiketter.`},box:{label:`Lådetikett (62 × 29 mm)`,hint:`En etikett per sida; storlek för Brother PT/QL och Dymo små etiketter.`},averyL7160:{label:`Avery L7160 — A4-ark (38,1 × 63,5 mm × 21)`,hint:`EU-ark; 21 etiketter per A4-sida.`},avery5160:{label:`Avery 5160 — US Letter-ark (25,4 × 66,7 mm × 30)`,hint:`US-ark; 30 etiketter per Letter-sida.`}}},csv:{importButton:`Importera CSV`,exportButton:`Exportera CSV`,modalTitle:`Importera rullar från CSV`,selectFile:`Välj en CSV-fil eller dra den hit`,dragHint:`Rubrik: material (obligatoriskt), brand, subtype, color_name, rgba, …`,parsing:`Läser fil…`,previewError:`Kunde inte läsa CSV-filen`,validCount:`{{count}} giltiga`,errorCount:`{{count}} fel`,skippedCount:`{{count}} hoppade över`,colRow:`Rad`,colStatus:`Status`,colColor:`Färg`,colorResolved:`Färg ifylld från katalog`,colorCrossMaterial:`Färg tagen från ett annat material — ingen exakt matchning i katalogen`,duplicateExisting:`En rulle med detta material, märke och färg finns redan — den kommer fortfarande att importeras som en ny rulle`,spoolmanHint:`I Spoolman-läge, använd Spoolmans inbyggda CSV-import/export.`,importValidRows:`Importera {{count}} giltiga rader`,noValidRows:`Inga giltiga rader`,importing:`Importerar…`,importSuccess:`{{count}} rullar importerade`,importError:`Kunde inte importera`,exportError:`Kunde inte exportera`},addSpool:`Lägg till rulle`,editSpool:`Redigera rulle`,copySpool:`Kopiera rulle`,material:`Material`,selectMaterial:`Välj material...`,subtype:`Subtyp`,brand:`Märke`,searchBrand:`Sök märke...`,useCustomBrand:`Använd "{{brand}}"`,useCustomMaterial:`Använd anpassat material: {{material}}`,suggestedOptions:`Föreslagna`,allOptions:`Alla`,colorName:`Färgnamn`,colorNamePlaceholder:`Jade-vit, Eldröd...`,color:`Färg`,hexColor:`Hex-färg`,pickColor:`Välj anpassad färg`,labelWeight:`Etikettvikt`,coreWeight:`Tom rullvikt`,searchSpoolWeight:`Sök rullvikt...`,weightUsed:`Använt`,currentWeight:`Återstående vikt`,measuredWeight:`Uppmätt vikt`,spoolName:`Rulle`,costPerKg:`Kostnad per kg`,storageLocation:`Lagringsplats`,temperature:`Temperatur`,humidity:`Luftfuktighet`,battery:`Batteri`,storageLocationPlaceholder:`t.ex. Hylla A, Låda 1`,openInInventory:`Öppna i inventarium`,measuredWeightError:`Uppmätt vikt måste vara mellan {{min}}g och {{max}}g.`,slicerFilament:`Slicer-filament`,slicerFilamentName:`Slicer-förinställningsnamn`,slicerPreset:`Slicer-förinställning`,searchPresets:`Sök filamentförinställningar...`,selectedPreset:`Vald`,noPresetsFound:`Inga förinställningar hittade`,tempOverrides:`Temperaturåsidosättningar`,note:`Anteckning`,notePlaceholder:`Eventuella ytterligare anteckningar om denna rulle...`,category:`Kategori`,categoryPlaceholder:`t.ex. Produktion, Prototyp, Kund A`,categoryNone:`Okategoriserad`,storageLocationNone:`Ingen lagringsplats inställd`,lowStockThresholdOverride:`Lågt lagertröskelvärde (denna rulle)`,lowStockThresholdOverrideHelp:`Lämna tomt för att använda det globala tröskelvärdet ({{global}}%).`,clearRfid:`Rensa RFID-tagg`,rfidCleared:`RFID-tagg rensad`,archive:`Arkivera`,restore:`Återställ`,noSpools:`Inga rullar än. Lägg till din första rulle för att komma igång.`,noAvailableSpools:`Inga rullar tillgängliga. Lägg till en rulle i ditt inventarium eller avlänka en från ett annat fack först.`,kProfiles:`K-profiler`,addKProfile:`Lägg till K-profil`,assignSpool:`Tilldela rulle`,unassignSpool:`Avlänka`,assignSuccess:`Rulle tilldelad och AMS-fack konfigurerat`,assignPendingInsert:`Tilldelad. Facket kommer att konfigureras när du sätter in rullen.`,assignFailed:`Kunde inte tilldela rulle`,selectSpool:`Välj en rulle att tilldela detta fack`,assigned:`Tilldelad`,assigning:`Tilldelar…`,searchSpools:`Sök rullar...`,showAllSpools:`Visa alla rullar`,spoolmanSpools:`Spoolman-rullar`,allMaterials:`Alla material`,filterByBrand:`Filtrera efter märke...`,showArchived:`Visa arkiverade`,quickAdd:`Snabb-lägg-till (Lager)`,quantity:`Kvantitet`,stock:`Lager`,configured:`Konfigurerad`,spoolsCreated:`{{count}} rullar skapade`,spoolsPartiallyCreated:`{{created}} av {{total}} rullar skapade (några misslyckades)`,spoolCreated:`Rulle skapad`,spoolUpdated:`Rulle uppdaterad`,spoolDeleted:`Rulle borttagen`,deepLinkSpoolNotFound:`Rulle hittades ej`,deepLinkFetchFailed:`Kunde inte ladda rulle — försök igen`,spoolArchived:`Rulle arkiverad`,spoolRestored:`Rulle återställd`,kProfileSaveFailed:`K-profilinställningar kunde inte sparas`,syncWeightSpoolNotFound:`Rulle hittades inte — den kan ha tagits bort`,syncWeightSpoolmanUnreachable:`Spoolman är otillgänglig — försök igen senare`,syncWeightFailed:`Kunde inte synkronisera vikt`,spoolmanUnreachable:`Spoolman kan ej nås — försök igen senare`,deleteSpoolNotFound:`Rulle hittades inte — den kan redan ha tagits bort`,deleteFailed:`Kunde inte ta bort rulle`,archiveSpoolNotFound:`Rulle hittades inte — den kan redan ha tagits bort`,archiveFailed:`Kunde inte arkivera rulle`,restoreSpoolNotFound:`Rulle hittades inte — den kan redan ha tagits bort`,restoreFailed:`Kunde inte återställa rulle`,saveFailed:`Kunde inte spara ändringar`,tagClearFailed:`Kunde inte rensa tagg`,deleteConfirm:`Är du säker på att du vill ta bort denna rulle? Detta kan inte ångras.`,archiveConfirm:`Är du säker på att du vill arkivera denna rulle?`,advancedSettings:`Avancerade inställningar`,filamentInfoTab:`Filamentinformation`,paProfileTab:`PA-profil`,colorAndCostTab:`Färg & kostnad`,printersTab:`Skrivare`,filamentInfo:`Filament`,additional:`Ytterligare`,loadingPresets:`Laddar molnförinställningar…`,cloudConnected:`Moln anslutet`,cloudNotConnected:`Moln ej anslutet (använder standard)`,recentColors:`Senaste`,searchColors:`Sök färger...`,searchResults:`Sökresultat`,allColors:`Alla färger`,commonColors:`Vanliga färger`,showLess:`Visa färre`,showAll:`Visa alla`,noColorsFound:`Inga färger matchar din sökning`,noResults:`Inga matchningar hittade`,extraColorsLabel:`Extra färger`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Klistra in 2 till 8 hex-stoppar, åtskilda av kommatecken. Renderas som en gradient.`,extraColorsInvalid:`Ignorerade ogiltiga hex: {{tokens}}`,colorEffectLabel:`Effekt`,colorEffect:{none:`Ingen`,sparkle:`Gnistrande`,wood:`Trä`,marble:`Marmor`,glow:`Lysande`,matte:`Matt`,silk:`Silke`,galaxy:`Galax`,rainbow:`Regnbåge`,metal:`Metall`,translucent:`Genomskinlig`,gradient:`Gradient`,dualColor:`Dubbelfärg`,triColor:`Trippelfärg`,multicolor:`Multifärg`},selectMaterialFirst:`Välj ett material först i fliken Filamentinformation.`,noPrintersConfigured:`Inga skrivare konfigurerade. Lägg till skrivare för att använda PA-profiler.`,matchingFilter:`Matchande`,anyBrand:`Alla märken`,anyVariant:`Alla varianter`,autoSelect:`Auto-välj`,matches:`matchningar`,match:`matchning`,noMatches:`Inga matchningar`,connected:`Ansluten`,offline:`Offline`,printerOffline:`Skrivaren är offline. Anslut för att visa kalibreringsprofiler.`,noKProfilesMatch:`Inga K-profiler matchar det valda filamentet.`,leftNozzle:`Vänster munstycke`,rightNozzle:`Höger munstycke`,profilesSelected:`kalibreringsprofil(er) valda`,filamentPreset:`Filamentförinställning`,presetUseSpoolDefault:`Använd rullens förinställning`,presetInherited:`ärvd`,presetOverride:`åsidosättning`,presetNeedsModel:`Den här skrivaren har inte rapporterat sin modell än, så den kan inte ha en egen förinställning.`,autoMatchPresets:`Auto-matcha`,autoMatchPresetsHint:`Hitta varianten av den här rullens förinställning som namnger varje modell`,kProfilesPerPrinter:`K-profiler`,kProfileNotSet:`Ej inställt`,kProfileFlowMismatch:`Denna profil mättes på ett {{profile}} munstycke men ett {{fitted}} munstycke är monterat, så det kommer inte att appliceras`,nozzle:`Munstycke`,unknownModel:`Okänd modell`,onePrinter:`1 skrivare`,nPrinters:`{{n}} skrivare`,filamentPresetsLoadFailed:`Det gick inte att ladda denna rullens per-modell-förinställningar`,filamentPresetSaveFailed:`Det gick inte att spara per modell-förinställningarna`,totalInventory:`Total inventarium`,totalConsumed:`Totalt förbrukat`,byMaterial:`Efter material`,inPrinter:`I skrivare`,lowStock:`Lågt lager`,sinceTracking:`Sedan räkning startade`,resetConsumedCounter:`Återställ räknare`,resetConsumedCounterTooltip:`Nollställ den förbrukade gramräknaren för denna rulle. Återstående vikt ändras ej.`,resetConsumedCounterConfirm:`Återställ denna rulles förbrukade gramräknare till 0? Framtida utskrifter kommer att räknas från noll igen. Rullen själv, dess återstående viktberäkning och dina inställningar ändras ej.`,resetAllConsumedCounters:`Återställ alla räknare`,resetAllConsumedCountersTooltip:`Nollställ den förbrukade gramräknaren på varje rulle. Återstående vikter ändras inte.`,resetAllConsumedCountersConfirm:`Återställ den förbrukade gramräknaren till 0 på alla {{count}} rullar (inklusive arkiverade)? Detta rensar "Totalt förbrukat"-statistiken så att framtida utskrifter räknas från noll. Rullar och återstående vikter ändras ej.`,consumedCounterReset:`Räknare återställd`,allConsumedCountersReset:`Räknare återställd för {{count}} rulle(r)`,resetConsumedCounterFailed:`Kunde inte återställa räknare`,loadedInAms:`Laddad i AMS/Ext`,remaining:`Återstående`,weightCheck:`Viktkontroll`,lastWeighed:`Senast vägd`,neverWeighed:`Aldrig vägd`,search:`Sök rullar...`,showing:`Visar`,to:`till`,of:`av`,show:`Visa`,spools:`rullar`,spool:`rulle`,page:`Sida`,noSpoolsMatch:`Inga resultat hittade`,noSpoolsMatchDesc:`Försök justera din sökning eller filter för att hitta det du letar efter.`,active:`Aktiv`,archived:`Arkiverad`,all:`Alla`,used:`Använd`,new:`Ny`,clearFilters:`Rensa filter`,table:`Tabell`,cards:`Kort`,net:`Nät`,groupSimilar:`Gruppera`,groupedSpools:`{{count}} identiska rullar`,groupedRows:`rader`,columns:`Kolumner`,configureColumns:`Konfigurera kolumner`,configureColumnsDesc:`Dra för att omordna kolumner eller använd pilarna. Växla synlighet med ögonikonen.`,visible:`synlig`,reset:`Återställ`,cancel:`Avbryt`,applyChanges:`Tillämpa ändringar`,moveUp:`Flytta upp`,moveDown:`Flytta ner`,hideColumn:`Dölj kolumn`,showColumn:`Visa kolumn`,linkToSpool:`Länka till rulle`,tagLinked:`Tagg länkad till rulle`,tagLinkFailed:`Kunde inte länka tagg`,tagAlreadyLinked:`Tagg är redan länkad till en annan rulle #{{id}}`,unknownTag:`Okänd RFID-tagg upptäckt`,usageHistory:`Användningshistorik`,noUsageHistory:`Ingen användning registrerad än`,printName:`Utskriftsnamn`,weightConsumed:`Vikt förbrukat`,clearHistory:`Rensa`,historyCleared:`Användningshistorik rensad`,fillSourceLabel:`(Inv)`,lowStockThresholdError:`Tröskelvärdet måste vara mellan 0,1 och 99,9`,assignMismatchTitle:`Materialfelmatchning`,assignMismatchMessage:`Det valda rullmaterialet "{{spoolMaterial}}" matchar inte fackmaterialet "{{trayMaterial}}" för {{location}}. Tilldela ändå?`,assignMismatchConfirm:`Tilldela ändå`,assignPartialMismatchMessage:`Rullmaterialet "{{spoolMaterial}}" liknar "{{trayMaterial}}" i {{location}} men matchar inte exakt. Vill du fortsätta?`,assignProfileMismatchMessage:`Rullprofilen "{{spoolProfile}}" matchar inte fackprofilen "{{trayProfile}}" i {{location}}. Vill du fortsätta?`,assignReconfigureNote:`AMS-facket kommer att omkonfigureras för att använda rullens profil.`,spoolmanFilamentCatalog:`Spoolman Filamentkatalog`,pickFromSpoolmanCatalog:`Välj från Spoolman-katalog…`,spoolmanFilamentSelected:`Filament valt från Spoolman-katalog`,spoolmanFilamentUnlinked:`Filamentkataloglänk rensad`,noSpoolmanFilaments:`Inga filament hittade i Spoolman-katalog`,spoolmanFilamentColorSwatch:`Filamentfärg`,spoolWeightManagedBySpoolman:`Tom rullvikt hanteras per filamenttyp i Spoolman`,spoolmanCatalogLoadFailed:`Kunde inte ladda Spoolman filamentkatalog`},timelapse:{title:`Timelapse`,create:`Skapa timelapse`,download:`Ladda ner`,delete:`Ta bort`,preview:`Förhandsvisning`,frameRate:`Bildfrekvens`,quality:`Kvalitet`,processing:`Bearbetar...`,noTimelapses:`Inga timelapse tillgängliga`},ams:{title:`AMS`,slot:`Fack`,empty:`Tomt`,emptySlot:`Tomt fack`,slotEmpty:`Tomt`,slotUnconfigured:`?`,emptySlotReset:`Inget filament tilldelat`,unknown:`Okänd`,humidity:`Luftfuktighet`,temperature:`Temperatur`,filamentType:`Filamenttyp`,filamentColor:`Färg`,remaining:`Återstående`,history:`AMS-historik`,noHistory:`Ingen historik tillgänglig`,configureSlot:`Konfigurera fack`,externalSpool:`Extern rulle`,profile:`Profil`,kFactor:`K-faktor`,kFactorShort:`K`,fill:`Fyll`,configure:`Konfigurera`,used:`använt`,remainingUnit:`återstående`},printModal:{variants:{editNote:`Dessa alternativ sattes när jobbet köades. Avbryt och köa om för att ändra dem.`,title:`Skrivaralternativ`,help:`Ett jobb, en köplats. Den första matchande skrivaren som blir ledig kör sin fil.`,unknownModel:`Okänd modell`,plateFor:`Platta för {{filename}}`,moveUp:`Flytta upp`,moveDown:`Flytta ner`,queued:`Köat med {{count}} alternativ`},selectPrinter:`Välj skrivare`,selectPlate:`Välj platta`,filamentMapping:`Filamentmappning`,useArchiveMapping:`Mappning`,useArchiveMappingTooltip:`Välj alla fack från AMS-mappningen som sparades med detta arkiv (från slicern), istället för att matcha efter typ/färg.`,clickToChangeSlot:`Klicka för att ändra facktilldelning`,reRead:`Läs om`,plateN:`Platta {{n}}`,plateFilamentsUnreadable:`Filamenten för en vald platta kunde inte läsas, så den kan inte mappas. Avmarkera den för att köa de andra.`,totalCost:`Total kostnad:`,slotRemainingShort:` - {{grams}}g kvar`,printSettings:`Utskriftsinställningar`,bedLeveling:`Byggplattsnivåinställning`,flowCalibration:`Flödeskalibrering`,vibrationCalibration:`Vibrationskalibrering`,layerInspection:`Förstaskiktsinspektion`,timelapse:`Timelapse`,cancel:`Avbryt`,noPrintersAvailable:`Inga skrivare tillgängliga`,printerBusy:`Skrivaren är upptagen`,printerOffline:`Skrivaren är offline`,sameTypeDifferentColor:`Samma typ, olika färg`,filamentTypeNotLoaded:`Filamenttyp inte laddad`,statusReady:`Redo`,statusColorMismatch:`Färg matchar ej`,statusTypeNotFound:`Typ hittades ej`,requiredTooltip:`Kräver: {{name}} - {{color}}`,manuallySelected:`Manuellt vald`,autoMatched:`Auto-matchad`,selectSlot:`Välj fack`,sameTypeDifferentColorDetail:`Samma typ, annan färg: behöver {{required}}, facket har {{loaded}}`,requiredTypeNotInPrinter:`Krävd filamenttyp hittades inte i skrivaren.`,whenToPrint:`När utskriften ska starta`,asap:`Så snart som möjligt`,queue:`Kö`,schedule:`Schemalägg`,dateTime:`Datum & tid`,invalidDateTime:`Ange ett giltigt datum och tid`,openCalendar:`Öppna kalender`,requireManualStart:`Kräv manuell start`,requirePreviousSuccess:`Starta endast om föregående utskrift lyckades`,autoOffAfter:`Stäng av skrivaren när den är klar`,helpAsap:`Utskriften kommer att läggas till i toppen av kön och starta så snart en lämplig skrivare är ledig.`,helpSchedule:`Utskriften kommer att starta vid den schemalagda tiden om skrivaren är ledig. Om den är upptagen kommer den att vänta tills skrivaren blir tillgänglig.`,helpQueue:`Utskriften kommer att läggas till i slutet av kön.`,leftNozzle:`V`,rightNozzle:`H`,leftNozzleTooltip:`Vänster munstycke`,rightNozzleTooltip:`Höger munstycke`,ftsSameInletHint:`Alla filament för denna print sitter på filamentspårväljare IN-{{inlet}}. Växlingen mellan filament på samma ingång är långsammare — flytta den ena till en AMS på den andra ingången för att snabba upp växlingen.`,rackPosition:`Hyllposition`,rackPositionTooltip:`Vilket munstycke på hyllan skriver ut detta filament? Positionerna är numrerade som på skrivaren..`,rackEmptyPosition:`Denna hyllposition är tom`,rackWrongNozzle:`Har {{has}} munstycke; detta filament behöver {{needs}}`,filamentOverride:`Åsidosätt filament`,filamentOverrideHint:`Välj att åsidosätta filament för modellbaserad tilldelning. Schemaläggaren kommer att matcha mot dina valda filament istället för de ursprungliga 3MF-värdena.`,originalFilament:`Original`,overrideWith:`Åsidosätt med`,resetToOriginal:`Återställ till original`,insufficientFilamentTitle:`Otillräckligt filament`,waitingForAmsStatus:`Väntar på AMS-status från {{printer}}…`,insufficientFilamentMessage:`Vissa tilldelade rullar har mindre filament kvar än denna utskrift behöver:`,insufficientFilamentLine:`{{printer}} - {{slot}}: behöver {{required}}g, återstående {{remaining}}g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: behöver {{required}}g, {{remaining}}g tillgängligt över matchande rullar (AMS-filamentbackup)`,printAnyway:`Skriv ut ändå`,forceColorMatch:`Tvinga färgmatchning`,staggerPrinterStarts:`Förskjut skrivarstart`,staggerGroupSize:`Gruppstorlek`,staggerInterval:`Intervall (min)`,staggerPreview:`{{printers}} skrivare → {{groups}} grupper om {{size}}, startar var {{interval}} minut`,staggerLastGroup:`sista grupp: {{count}}`,staggerTotal:`totalt: {{minutes}} min`,staggerToPrinters:`Förskjut till {{count}} skrivare`,gcodeInjection:`Injicera auto-utskrifts-G-kod`,insufficientBudget:`Otillräcklig budget`,unlimitedNoBudget:`Obgränsad – ingen budgetgräns är inställd.`,noPrintableCostCenters:`Inget aktivt kostnadsställe är tillgängligt för utskrift. Be en administratör att ge dig utskriftsåtkomst.`},backup:{includesEncryptionKey:`Lokala säkerhetskopior inkluderar MFA-krypteringsnyckelfilen (DATA_DIR/.mfa_encryption_key), så en säkerhetskopie-ZIP är självständig. Behandla ZIP-filen som känslig — vem som helst med filen kan dekryptera OIDC-klienthemligheterna och TOTP-hemligheterna som lagras inuti.`,title:`Säkerhetskopia & Återställning`,createBackup:`Skapa säkerhetskopia`,restoreBackup:`Återställ säkerhetskopia`,restoreDescription:`Ersätt all data från en säkerhetskopia`,downloadBackup:`Ladda ner säkerhetskopia`,uploadBackup:`Ladda upp säkerhetskopia`,lastBackup:`Senaste säkerhetskopia`,autoBackup:`Automatisk säkerhetskopia`,backupNow:`Säkerhetskopiera nu`,restoreWarning:`Varning: Återställning av en säkerhetskopia kommer att skriva över all nuvarande data.`,includeArchives:`Inkludera arkiv`,includeSettings:`Inkludera inställningar`,includeProfiles:`Inkludera profiler`,backupSuccess:`Säkerhetskopia skapad`,restoreSuccess:`Säkerhetskopia återställd`,backupFailed:`Kunde inte skapa säkerhetskopia`,restoreFailed:`Kunde inte återställa säkerhetskopia`,restoreNote:`Virtuell skrivare kommer att stoppas under återställning`,githubBackup:`Git-säkerhetskopia`,enabled:`Aktiverad`,cloudLoginRequired:`Inloggning till Bambu Cloud krävs. Logga in under Profiler → Molnprofiler för att aktivera GitHub-säkerhetskopia.`,cloudLoginRequiredShort:`Molninloggning krävs`,githubDescription:`Synkronisera dina profiler automatiskt till ett privat GitHub-kodförråd för säkerhetskopiering och versionshistorik.`,repoIsPrivate:`Kodförrådet är privat — säkert att säkerhetskopiera till.`,repoIsPublicWarning:`Kodförrådet är PUBLIKT. Bambuddy-säkerhetskopior inkluderar MQTT-uppgifter, Home Assistant-tokens, Prometheus-tokens, din Bambu Cloud-e-post och skrivaråtkomstkoder via K-profiler. Sparning blockeras tills du gör repositoryt privat i din leverantörs inställningar.`,repoVisibilityUnknown:`Kunde inte fastställa repositoryns synlighet. Bambuddy vägrar att säkerhetskopiera till något som inte bekräftats som privat; sparande kommer att blockeras.`,repositoryUrl:`Kodförråd-URL`,repoUrlPlaceholderGitHub:`https://github.com/användarnamn/repo-namn`,repoUrlPlaceholderGitea:`https://gitea.example.com/användarnamn/repo-namn`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/användarnamn/repo-namn`,repoUrlPlaceholderGitLab:`https://gitlab.com/användarnamn/repo-namn`,allowInsecureHttp:`Tillåt osäker HTTP`,allowInsecureHttpHint:`Aktivera för självhostade instanser på privata nätverk utan TLS`,personalAccessToken:`Personlig åtkomsttoken`,tokenSaved:`(sparad)`,enterNewToken:`Ange ny token för att uppdatera`,tokenHintGitHub:`Finkornig token med Contents-läs- och skrivåtkomst, eller en klassisk token med repo-omfång.`,tokenHintGitLab:`Token med api-omfång, eller read_repository och write_repository tillsammans.`,tokenHintGitea:`Token med write:repository-omfång.`,tokenHintForgejo:`Token med write:repository-omfång. En token begränsad till detta enda kodförråd räcker.`,branch:`Gren`,provider:`Git-leverantör`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Endast manuell`,hourly:`Varje timme`,daily:`Dagligen`,weekly:`Veckovis`,includeInBackup:`Inkludera i säkerhetskopia`,kProfiles:`K-profiler`,kProfilesDescription:`Tryckförskottskalibrering från anslutna skrivare`,noPrintersConnected:`Inga skrivare anslutna`,printersConnected:`{{connected}}/{{total}} anslutna`,cloudProfiles:`Molnprofiler`,cloudProfilesDescription:`Filament-, skrivar- och processförinställningar från Bambu Cloud och Orca Cloud`,cloudProfilesAccounts:`Anslutna konton — Bambu Cloud: {{bambu}}, Orca Cloud: {{orca}}`,appSettings:`App-inställningar`,appSettingsDescription:`Bambuddy-konfiguration (komplett databas)`,spoolInventory:`Rullinventarium`,spoolInventoryDescription:`Filamentrullar, användningshistorik och kostnadsspårning`,printArchives:`Utskriftsarkiv`,printArchivesDescription:`Utskriftshistorik-metadata (inga gcode/3MF-filer)`,lastBackupAt:`Senaste säkerhetskopia:`,noBackupsYet:`Inga säkerhetskopior än`,next:`Nästa:`,startingBackup:`Startar säkerhetskopia...`,test:`Test`,enableBackup:`Aktivera säkerhetskopia`,testConnection:`Testa anslutning`,enterRepoUrl:`Ange kodförråds-URL`,enterRepoAndToken:`Ange kodförråds-URL och åtkomsttoken`,repoRequired:`Kodförråds-URL krävs`,tokenRequired:`Åtkomsttoken krävs`,githubBackupEnabled:`GitHub-säkerhetskopia aktiverad`,tokenUpdated:`Token uppdaterad`,settingsSaved:`Inställningar sparade`,failedToSave:`Kunde inte spara: {{message}}`,backupCompleteFiles:`Säkerhetskopia slutförd - {{count}} filer uppdaterade`,backupSkippedNoChanges:`Säkerhetskopia hoppade över - inga ändringar`,backupFailed2:`Kunde inte skapa säkerhetskopia: {{message}}`,clearedLogs:`Rensade {{count}} loggar`,failedToClearLogs:`Kunde inte rensa loggar: {{message}}`,restoreFromGit:{button:`Återställ från Git`,title:`Återställ från Git-säkerhetskopia`,subtitle:`Välj en commit och välj vad som ska återställas`,commitLabel:`Säkerhetskopie-commit`,latestCommit:`Senaste säkerhetskopia (grenens topp)`,categoriesLabel:`Vad som ska återställas`,inspecting:`Läser säkerhetskopieinnehåll...`,itemCount:`{{count}} i säkerhetskopian`,overwriteLabel:`Skriv över befintliga poster`,overwriteOn:`Befintliga poster kommer att uppdateras från säkerhetskopian.`,overwriteOff:`Endast saknade poster läggs till; befintliga lämnas orörda.`,selectedCount:`{{count}} valda`,restoring:`Återställer...`,confirmTitle:`Återställ från säkerhetskopia?`,confirmMessage:`De valda kategorierna kommer att återställas från denna commit. Saknade poster läggs till; befintliga poster förblir oförändrade.`,confirmMessageOverwrite:`De valda kategorierna kommer att återställas från denna commit, och skriva över poster som redan finns lokalt. Detta kan inte ångras.`,kprofilesOverwriteCaveat:`K-profiler är undantaget: att skriva till ett fack ersätter alltid kalibreringen på skrivaren.`,tally:`{{restored}} återställda, {{skipped}} hoppade över, {{failed}} misslyckades`,reloadHint:`Ladda om Bambuddy så att den återställda datan visas överallt.`,partialHint:`Kategorierna som listas ovan är klara och på disken. Eventuella saknade kategorier kördes inte.`,failed:`Kunde inte återställa.`,loadFailed:`Kunde inte läsa säkerhetskopiekodförrådet.`,details:{notPresent:`Finns inte i denna säkerhetskopie-commit`,unreadableJson:`Oläsliga JSON: {{paths}}`,settingsNoPayload:`Inga inställningar i nyttolast`,settingsCredentialsWillSkip:`{{count}} uppgift(er) av typen lösenord kommer att hoppas över`,settingsCompanionWillSkip:`{{count}} uppgift(er) av typen lösenord kommer att hoppas över, och {{companion}} växlar som beror på dem kommer att lämnas av`,settingsCompanionOnlyWillSkip:`{{companion}} växlar kommer att lämnas av — den uppgift som var och en behöver kan inte återställas från en säkerhetskopia`,spoolsUsageCount:`inklusive {{count}} användningspost(er)`,archivesMetadataOnly:`Endast metadata — 3MF-filer och minibilder finns inte i en Git-säkerhetskopia`,kprofilesPrinterCount:`över {{count}} skrivare`},notes:{noData:`Ingen data av denna typ i denna säkerhetskopia`,archivesPrinterMissing:`Vissa arkiv refererade till skrivare som inte längre finns — länk rensad`,archivesProjectMissing:`Vissa arkiv refererade till projekt som inte längre finns — länk rensad`,archivesOwnerCleared:`Vissa arkiv refererade till användare som inte längre finns — ägare rensad, så de är synliga endast för användare med behörigheten archives:read_all tills en admin tilldelar dem på nytt`,archivesOwnerUnmatched:`Vissa arkiv namnger en ägare som denna instans inte har — ägare rensad snarare än gissad från säkerhetskopians användar-ID, så de är synliga endast för användare med behörigheten archives:read_all tills en admin tilldelar dem på nytt`,archivesOwnerUnknown:`Vissa arkiv återställdes utan en ägare — denna säkerhetskopia registrerar ingen, så de är synliga endast för användare med behörigheten archives:read_all tills en admin tilldelar dem på nytt`,archivesUndeleted:`Arkiv som tagits bort sedan säkerhetskopian är synliga igen — skriv över var aktiverad`,archivesMetadataOnly:`Återställda arkiv innehåller endast metadata — 3MF- och minibildfiler finns inte i en Git-säkerhetskopia`,spoolUsageUnresolved:`{{count}} användningspost(er) hoppade över — deras rulle finns inte i denna säkerhetskopias rulllista, så det finns inget att koppla dem till.`,spoolUsageUnlinked:`{{count}} användningspost(er) återställda utan sin utskriftshistorik-länk — välj Utskriftsarkiv tillsammans med Rullinventering för att behålla den.`,spoolTagKept:`{{count}} rulletagg(ar) lämnade som de är — säkerhetskopian skulle ha rensat en tagg som sedan dess skannats, eller flyttat en till en andra rulle.`,settingsCredentialsSkipped:`{{count}} uppgift(er) av typen lösenord hoppade över — ange hemligheter manuellt igen`,settingsAuthSkipped:`{{count}} autentiseringsinställning(ar) hoppade över — ändra dem i Inställningar > Autentisering så att uteslutningskontrollerna fortfarande körs`,settingsCompanionSkipped:`{{keys}} lämnade avstängda — den uppgift som var och en behöver kan inte återställas från en säkerhetskopia och denna instans har ingen lagrad, så att slå på dem skulle lämna integrationen oautentiserad`,settingsMqttRelayFailed:`MQTT-inställningar återställda, men reläet kunde inte återanslutas — starta om Bambuddy`,kprofilesAlwaysOverwrite:`K-profiler skriver alltid över det matchande facket på skrivaren`,kprofilesAckUnreliable:`En skrivare som inte svarar räknas ändå som återställd — verifiera profilerna på skrivaren`,kprofilesPrinterMissing:`Ingen skrivare med serienummer {{serial}} — hoppade över`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) är inte ansluten — hoppade över`,kprofilesUnknownNozzle:`Oväntad munstyckesdiameter {{nozzle}} för {{serial}} — skickad som den är`,kprofilesUnmatched:`{{count}} profil(er) för {{nozzle}} hade ingen motsvarighet på {{printer}} — lades till som nya profiler`,kprofilesSendFailed:`Kunde inte skicka {{nozzle}}-profiler till {{printer}} ({{serial}})`,kprofilesRefused:`{{printer}} ({{serial}}) vägrade {{nozzle}}-profilerna: {{reason}}`,kprofilesStepFailed:`K-profil-steget kunde inte slutföras — {{reason}}. Allt som återställdes före det är fortfarande sparat.`}},history:`Historik`,clear:`Rensa`,date:`Datum`,status:`Status`,trigger:`Typ`,triggers:{manual:`Säkerhetskopia (manuell)`,scheduled:`Säkerhetskopia (schemalagd)`,restore:`Återställning`},commit:`Commit`,localBackup:`Lokal säkerhetskopia`,localBackupDescription:`Skapa en komplett säkerhetskopia av din Bambuddy-data inklusive databas, arkiv, uppladdningar och alla filer.`,downloadBackupLabel:`Ladda ner säkerhetskopia`,completeBackupZip:`Komplett säkerhetskopia: databas + alla filer (ZIP)`,download:`Ladda ner`,preparingBackup:`Förbereder säkerhetskopia...`,creatingArchive:`Skapar säkerhetskopiearkiv... Detta kan ta en stund för stora arkiv.`,downloadingFile:`Laddar ner säkerhetskopia...`,backupDownloaded:`Säkerhetskopia nedladdad`,failedToCreateBackup:`Kunde inte skapa säkerhetskopia: {{message}}`,restore:`Återställ`,restoreReplacesAll:`Återställning ersätter all data.`,restoreReplacesAllDetail:`Din nuvarande databas och filer kommer att ersättas fullständigt. En omstart krävs efter återställning.`,restoreConfirmTitle:`Återställ säkerhetskopia`,restoreConfirmMessage:`Är du säker på att du vill återställa från "{{filename}}"? Detta kommer att ersätta din nuvarande databas och alla filer fullständigt. Applikationen måste startas om efter återställning.`,restoreConfirmButton:`Återställ säkerhetskopia`,uploadingFile:`Laddar upp säkerhetskopia...`,backupRestoredRestart:`Säkerhetskopia återställd. Starta om Bambuddy.`,failedToRestore:`Kunde inte återställa säkerhetskopia. Kontrollera filformatet.`,reloadNow:`Ladda om nu`,creatingBackup:`Skapar säkerhetskopia`,restoringBackup:`Återställer säkerhetskopia`,preparing:`Förbereder...`,processing:`Bearbetar...`,doNotClosePage:`Stäng inte denna sida eller navigera bort. Denna operation kan ta flera minuter för stora säkerhetskopior.`,restoring:`Återställer...`,restoreComplete:`Återställning slutförd`,restoreFailed2:`Kunde inte återställa`,importSettings:`Importera inställningar från en säkerhetskopia`,pleaseWaitRestoring:`Vänligen vänta medan din data återställs`,selectBackupFile:`Klicka för att välja säkerhetskopia (.json eller .zip)`,duplicateHandling:`Hur dubbletter hanteras:`,matchPrinters:`Skrivare`,matchPrintersBy:`matchade efter serienummer`,matchSmartPlugs:`Kontakter`,matchSmartPlugsBy:`matchade efter IP-adress`,matchNotificationProviders:`Notisleverantörer`,matchNotificationProvidersBy:`matchade efter namn`,matchFilaments:`Filament`,matchFilamentsBy:`matchade efter namn + typ + märke`,matchArchives:`Arkiv`,matchArchivesBy:`matchade efter innehållshash (hoppas alltid över)`,matchPendingUploads:`Väntande uppladdningar`,matchPendingUploadsBy:`matchade efter filnamn`,matchSettingsTemplates:`Inställningar & mallar`,matchSettingsTemplatesBy:`skrivs alltid över`,replaceExisting:`Ersätt befintlig data`,keepExisting:`Behåll befintlig data`,overwriteDescription:`Skriv över objekt som redan finns med säkerhetskopiedata`,keepDescription:`Endast återställ objekt som inte redan finns`,overwriteCaution:`Försiktighet:`,overwriteWarning:`Att skriva över kommer att ersätta dina nuvarande konfigurationer med data från säkerhetskopian. Skrivaråtkomstkoder skrivs aldrig över av säkerhetskäl.`,cancel:`Avbryt`,processingBackup:`Bearbetar säkerhetskopia...`,itemsRestored:`Objekt återställda`,itemsSkipped:`Objekt hoppades över`,restored:`Återställd`,skippedAlreadyExist:`Hoppade över (finns redan)`,filesCategory:`Filer (3MF, minibilder, etc.)`,andMore:`...och {{count}} till`,newApiKeysGenerated:`Nya API-nycklar genererade`,keysShownOnce:`Dessa nycklar visas endast en gång. Kopiera dem nu!`,copy:`Kopiera`,noDataFound:`Ingen data att återställa hittades i säkerhetskopian.`,close:`Stäng`,scheduledBackup:`Schemalagda säkerhetskopior`,scheduledBackupDescription:`Skapa säkerhetskopieögonblicksbilder automatiskt enligt ett schema. Utdata-katalogen kan monteras till en NAS eller extern lagring.`,frequency:`Frekvens`,backupTime:`Tid`,retention:`Bevarande`,retentionDescription:`Antal säkerhetskopior att behålla`,outputPath:`Utdata-sökväg`,outputPathPlaceholder:`Standard: {{path}}`,outputPathDescription:`Lämna tom för standardplats`,runNow:`Kör nu`,backupFiles:`säkerhetskopior`,noScheduledBackups:`Inga säkerhetskopior än`,deleteBackup:`Ta bort`,deleteBackupConfirm:`Ta bort denna säkerhetskopia?`,backupRunning:`Säkerhetskopiering pågår...`,scheduledBackupComplete:`Säkerhetskopia slutförd`,scheduledBackupFailed:`Kunde inte skapa säkerhetskopia`,nextBackup:`Nästa säkerhetskopia`,backupSize:`Storlek`,localTimeHint:`Lokal tid ({{tz}})`,defaultPathLabel:`Standard:`,pathCheck:{title:`Bambuddy kan inte skriva till denna katalog`,howToFix:`Så här åtgärdar du:`,sandboxed:`Bambuddy-tjänsten kan inte skriva till {{path}}. Dess systemd-enhet körs med ProtectSystem=strict, vilket gör varje katalog utanför installations-, data- och loggkatalogerna skrivskyddade för tjänsten — även om du själv kan skriva till den från ditt eget skal.`,read_only:`{{path}} är på ett skrivskyddat filsystem.`,permission_denied:`Bambuddy har inte behörighet att skriva till {{path}}. Kontrollera katalogägaren och behörigheterna.`,no_space:`Filsystemet som innehåller {{path}} är fullt.`,not_a_directory:`{{path}} finns men är inte en katalog.`,missing:`{{path}} finns inte och kunde inte skapas.`,error:`Bambuddy kan inte skriva till {{path}}.`,ephemeralTitle:`Dessa säkerhetskopior kommer inte att överleva en container-omstart`,container_ephemeral:`{{path}} är inne i Bambuddy-containern, inte på värden. Säkerhetskopior som skrivs dit försvinner när containern skapas om. Montera katalogen från värden:`},categories:{settings:`Inställningar`,notification_providers:`Notisleverantörer`,notification_templates:`Notismallar`,smart_plugs:`Kontakter`,printers:`Skrivare`,filaments:`Filament`,maintenance_types:`Underhållstyper`,archives:`Arkiv`,projects:`Projekt`,pending_uploads:`Väntande uppladdningar`,external_links:`Externa länkar`,api_keys:`API-nycklar`}},tags:{title:`Taggar`,addTag:`Lägg till tagg`,editTag:`Redigera tagg`,deleteTag:`Ta bort tagg`,tagName:`Taggnamn`,tagColor:`Taggfärg`,noTags:`Inga taggar`,deleteConfirm:`Är du säker på att du vill ta bort denna tagg?`,manageTags:`Hantera taggar`},uploadModal:{title:`Ladda upp 3MF-filer`,dragDrop:`Dra och släpp .3mf-filer här`,or:`eller`,browseFiles:`Bläddra bland filer`,extractionInfo:`Skrivarmodellen kommer automatiskt att extraheras från 3MF-filens metadata.`,uploaded:`uppladdade`,failed:`misslyckades`,uploading:`Laddar upp...`,upload:`Ladda upp`,uploadFailed:`Kunde inte ladda upp`},editArchive:{title:`Redigera arkiv`,name:`Namn`,namePlaceholder:`Utskriftsnamn`,printer:`Skrivare`,noPrinter:`Ingen skrivare`,project:`Projekt`,noProject:`Ingen projekt`,itemsPrinted:`Antal utskrivna objekt`,itemsPrintedHelp:`Antal objekt som producerats i detta utskriftsjobb`,filamentUsed:`Filament använt (g)`,filamentUsedPlaceholder:`t.ex. 46,16`,filamentUsedHelp:`Ställ in detta manuellt när en utskrift arkiveras utan sin 3MF, så att den fortfarande räknas mot filamenttotalen. Om man skannar om ett arkiv som har sin 3MF läser man tillbaka siffran från filen.`,notes:`Anteckningar`,notesPlaceholder:`Lägg till anteckningar om denna utskrift...`,externalLink:`Extern länk`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Länk till Printables, Thingiverse eller annan källa`,tags:`Taggar`,tagsPlaceholder:`Lägg till taggar...`,addMoreTags:`Lägg till fler taggar...`,matchingTags:`Matchande "{{query}}"`,existingTags:`Befintliga taggar`,clickToAdd:`(klicka för att lägga till)`,status:`Status`,failureReason:`Orsak till fel`,selectReason:`Välj orsak...`,photos:`Bilder av utskriftsresultat`,photosHelp:`Klicka på + för att lägga till bilder av ditt utskriftsresultat`,printResult:`Utskriftsresultat`,saving:`Sparar...`,failureReasons:{adhesionFailure:`Vidhäftningsfel`,spaghettiDetached:`Spaghetti / lossning`,layerShift:`Skiktförskjutning`,cloggedNozzle:`Igensatt munstycke`,filamentRunout:`Filament tog slut`,warping:`Förskevning`,stringing:`Trådighet`,underExtrusion:`Under-extrudering`,powerFailure:`Strömavbrott`,userCancelled:`Användare avbröt`,noStatusUpdate:`Ingen statusuppdatering mottogs`,other:`Annat`},statuses:{completed:`Slutförd`,failed:`Misslyckad`,aborted:`Avbruten`,printing:`Skriver ut`}},kProfiles:{title:`K-profiler`,noPrintersConfigured:`Inga skrivare konfigurerade`,addPrinterInSettings:`Lägg till en skrivare i Inställningar för att hantera K-profiler`,noActivePrinters:`Inga aktiva skrivare`,enablePrinterConnection:`Aktivera skrivaranslutning för att visa dess K-profiler`,loadingProfiles:`Laddar K-profiler...`,printerOffline:`Skrivare offline`,printerOfflineDesc:`Den valda skrivaren är inte ansluten. Sätt på den för att visa K-profiler.`,noMatchingProfiles:`Inga matchande profiler`,noMatchingProfilesDesc:`Inga profiler matchar dina sökvillkor`,noKProfiles:`Inga K-profiler`,noKProfilesDesc:`Inga tryckförskottsprofiler hittade för {{diameter}} mm munstycke`,createFirstProfile:`Skapa en första profil`,printer:`Skrivare`,nozzle:`Munstycke`,refresh:`Uppdatera`,addProfile:`Lägg till profil`,export:`Exportera`,import:`Importera`,select:`Välj`,selectAll:`Markera alla`,delete:`Ta bort`,searchPlaceholder:`Sök efter namn eller filament...`,allExtruders:`Alla extrudrar`,leftOnly:`Endast vänster`,rightOnly:`Endast höger`,allFlow:`Allt flöde`,hfOnly:`Endast HF`,sOnly:`Endast S`,sortName:`Sortera: Namn`,sortKValue:`Sortera: K-värde`,sortFilament:`Sortera: Filament`,leftExtruder:`Vänster extruder`,rightExtruder:`Höger extruder`,modal:{addTitle:`Lägg till K-profil`,editTitle:`Redigera K-profil`,profileName:`Profilnamn`,profileNamePlaceholder:`Min PLA-profil`,kValue:`K-värde`,kValuePlaceholder:`0,020`,kValueHelp:`Typiskt intervall: 0,01 - 0,06 för PLA, 0,02 - 0,10 för PETG`,filament:`Filament`,selectFilament:`Välj filament...`,source:{local:`Importerad`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Inbyggd`},noFilamentsHelp:`Inga filament tillgängliga. Logga in på Bambu Cloud, eller importera förinställningar under Profiler → Lokala profiler.`,searchFilaments:`Sök filament...`,noFilamentMatches:`Inga filament matchar den sökningen`,flowType:`Flödestyp`,highFlow:`Högt flöde`,standard:`Standard`,nozzleSize:`Munstyckesstorlek`,extruder:`Extruder`,extruders:`Extrudrar`,left:`Vänster`,right:`Höger`,notes:`Anteckningar (lagras lokalt)`,notesPlaceholder:`Lägg till anteckningar om denna profil...`,notesHelp:`Anteckningar sparas i Bambuddy, inte på skrivaren`,syncing:`Synkroniserar med skrivare...`,savingExtruder:`Sparar till extruder {{current}}/{{total}}...`,pleaseWait:`Vänligen vänta`},deleteConfirm:{title:`Ta bort profil`,cannotUndo:`Denna åtgärd kan inte ångras`,message:`Är du säker på att du vill ta bort "{{name}}" från skrivaren?`},bulkDelete:{title:`Ta bort profiler`,cannotUndo:`Denna åtgärd kan inte ångras`,message:`Är du säker på att du vill ta bort {{count}} valda profiler från skrivaren?`},toast:{profileSaved:`K-profil sparad`,profilesSaved:`K-profil sparad till {{count}} extrudrar`,selectAtLeastOneExtruder:`Välj minst en extruder`,selectFilament:`Välj ett filament först`,filamentNotResolvable:`Inget Bambu-filament-ID för {{name}} — skrivaren kan inte lagra en profil för den`,profileDeleted:`K-profil borttagen`,profilesDeleted:`Tog bort {{count}} profiler`,exportedProfiles:`Exporterade {{count}} profiler`,importedProfiles:`Importerade {{count}} av {{total}} profiler`,noProfilesToExport:`Inga profiler att exportera`,invalidFileFormat:`Ogiltigt filformat`,failedToParseImport:`Kunde inte tolka importfil`,failedToSaveBatch:`Kunde inte spara K-profiler`,noteSaved:`Anteckning sparad`,failedToSaveNote:`Kunde inte spara anteckning`},permission:{noRead:`Du har inte behörighet att uppdatera profiler`,noCreate:`Du har inte behörighet att lägga till profiler`,noUpdate:`Du har inte behörighet att uppdatera K-profiler`,noDelete:`Du har inte behörighet att ta bort K-profiler`,noExport:`Du har inte behörighet att exportera profiler`,noImport:`Du har inte behörighet att importera profiler`}},virtualPrinter:{title:`Virtuell skrivare`,running:`Körs`,stopped:`Stoppad`,description:{default:`Aktivera en virtuell skrivare som visas i Bambu Studio och OrcaSlicer. Filer som skickas till denna skrivare kommer att arkiveras direkt utan utskrift.`,proxy:`Aktivera en proxy som vidarebefordrar slicer-trafik till en riktig skrivare, vilket möjliggör fjärrutskrift över vilket nätverk som helst.`},enable:{title:`Aktivera virtuell skrivare`,visibleInSlicer:`Synlig som "Bambuddy" i slicer-uppäckt`,proxyingTo:`Vidarebefordrar till {{name}}`,notActive:`Inte aktiv`},model:{title:`Skrivarmodell`,description:`Välj vilken skrivarmodell som ska emuleras.`,restartWarning:`Att ändra modellen kommer att starta om den virtuella skrivaren`},accessCode:{title:`Åtkomstkod`,isSet:`Åtkomstkod är inställd`,notSet:`Ingen åtkomstkod inställd — krävs för att aktivera`,placeholder:`Ange 8-teckens kod`,placeholderChange:`Ange ny kod för att ändra`,hint:`Måste vara exakt 8 tecken. Används av slicer för autentisering.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Ärvd från mål`,derivedFromTargetHint:`Använder målskrivarens åtkomstkod. Bryggan vidarebefordrar slicer-autentisering till den riktiga skrivaren, så koderna måste matcha — redigera målskrivarens åtkomstkod för att ändra detta värde.`,reveal:`Visa åtkomstkod`,hide:`Dölj åtkomstkod`},targetPrinter:{title:`Målskrivare`,configured:`Proxy-mål konfigurerat`,notConfigured:`Ingen målskrivare vald — krävs för proxyläge`,placeholder:`Välj en skrivare...`,hint:`Välj den skrivare som slicer-trafiken ska vidarebefordras till. Skrivaren måste vara i LAN-läge.`,noPrinters:`Inga skrivare konfigurerade. Lägg till en skrivare först för att använda proxyläge.`},remoteInterface:{title:`Åsidosättning för nätverksgränssnitt`,configured:`Åsidosättning för nätverksgränssnitt aktiv`,optional:`Valfritt — använd om auto-upptäckt IP är fel (t.ex. flera nätverkskort, Docker, VPN)`,placeholder:`Auto-upptäckt (standard)...`,hint:`Åsidosätter IP-adressen som annonseras via SSDP och används i TLS-certifikatet. Användbart när Bambuddy har flera nätverksgränssnitt.`},mode:{title:`Läge`,archive:`Arkiv`,archiveDesc:`Arkivera filer omedelbart`,review:`Granskning`,reviewDesc:`Granska innan arkivering`,queue:`Kö`,queueDesc:`Arkivera och lägg till i kö`,proxy:`Proxy`,proxyDesc:`Vidarebefordra till riktig skrivare`},autoDispatch:{title:`Auto-utskick`,description:`Starta utskrifter automatiskt när de läggs till i kön. När avstängd väntar utskrifter på manuell utskickning.`},queueForceColorMatch:{title:`Tvinga färgmatchning`,description:`Vägra att skicka till en skrivare som inte har exakt filamenttyp och färg laddad. Avstängd som standard — utan detta använder kön endast modellmatchning och kan välja en skrivare med fel färg laddad.`},saveAmsMapping:{title:`Spara AMS-mappning`,description:`Bevara slicerns egna AMS-facksval (från project_file MQTT-kommando) i arkivet, så att en senare omutskrift återanvänder den exakta fysiska rullen istället för att härleda en ny från filens typ/färg. Avstängd som standard.`},gcodeInjection:{title:`G-kod-injektering`,description:`Tillämpa de modellspecifika G-kodsnuttar som konfigurerats i Inställningar på jobb från denna VP. Avstängd som standard.`},tailscaleDisabled:{title:`Tailscale-integration`,description:`Aktivera för att markera denna VP som exponerad över Tailscale. Visar värdens Tailscale-adress så att du vet vilken IP du ska klistra in i slicern. CA-import-steget är oförändrat — denna växling har ingen effekt på certifikat.`},setupRequired:{title:`Inställning krävs`,description:`Funktionen för virtuell skrivare kräver ytterligare systemkonfiguration innan den fungerar. Detta inkluderar portvidarebefordran, brandväggsregler och plattformsspecifika inställningar.`,readGuide:`Läs inställningsguiden innan du aktiverar`},archiveNameSource:{title:`Källa för arkivnamn`,description:`Välj hur nya arkiv ska namnges när filer anländer via den virtuella skrivaren. "Metadata" använder den inbäddade titeln från slicern från 3MF (standard). "Filnamn" använder filnamnet som Bambu Studio skickade via FTP. Obs: Bambu Studio skriver över det namn du skriver i dialogrutan "Skicka till skrivare" med 3MF:ens Titel-fält när sådant finns, så båda lägen producerar ofta samma sträng.`,metadata:`Metadata`,filename:`Filnamn`},caCert:{title:`Slicer-certifikat`,description:`Virtuella skrivare använder ett TLS-certifikat signerat av Bambuddy-CA. Importera detta CA-certifikat till din slicers betroda lagring en gång så att den accepterar anslutningen — ingen anledning att kopiera det från kommandoraden.`,copy:`Kopiera`,copied:`Kopierad`,download:`Ladda ner`,fingerprint:`SHA-256`},howItWorks:{title:`Hur det fungerar`,step1:`På samma subnät visas virtuella skrivare automatiskt i din slicer (Bambu Studio / OrcaSlicer) via upptäckt. Från andra nätverk lägger du till dem manuellt via IP-adress och åtkomstkod.`,step2:`I Arkiv-, Gransknings- och Kölägen, använd knappen "Skicka" i din slicer för att ladda upp 3MF-filer till Bambuddy. Slicern kommer att visa "Utskrift lyckades" — filen lagras, inte skrivs ut.`,step3:`I Proxyläge vidarebefordrar den virtuella skrivaren all trafik till en riktig skrivare — utskrifter startar omedelbart som om den vore ansluten direkt.`},status:{title:`Statusdetaljer`,printerName:`Skrivarnamn`,model:`Modell`,serialNumber:`Serienummer`,mode:`Läge`,pendingFiles:`Väntande filer`,targetPrinter:`Målskrivare`,ftpPort:`FTP-port`,mqttPort:`MQTT-port`,ftpConnections:`FTP-anslutningar`,mqttConnections:`MQTT-anslutningar`},toast:{updated:`Inställningar för virtuell skrivare uppdaterade`,failedToUpdate:`Kunde inte uppdatera inställningar`,copyFailed:`Kunde inte kopiera — försök markera texten manuellt`,accessCodeRequired:`Ange en åtkomstkod först`,targetPrinterRequired:`Välj en målskrivare först`,bindIpRequired:`Ange en bind-IP först`,accessCodeEmpty:`Åtkomstkod kan inte vara tom`,accessCodeLength:`Åtkomstkod måste vara exakt 8 tecken`,targetCodeChangedRebind:`Åtkomstkoden matchar nu den nya målskrivaren. Lägg till denna enhet igen i din slicer för att hämta den nya koden.`,created:`Virtuell skrivare skapad`,failedToCreate:`Kunde inte skapa virtuell skrivare`,deleted:`Virtuell skrivare borttagen`,failedToDelete:`Kunde inte ta bort virtuell skrivare`},list:{title:`Virtuella skrivare`,add:`Lägg till`,addFirst:`Lägg till virtuell skrivare`,empty:`Inga virtuella skrivare konfigurerade. Lägg till en för att komma igång.`},bindIp:{title:`Bind gränssnitt`,placeholder:`Välj gränssnitt...`,hint:`Nätverksgränssnitt för denna virtuella skrivare att binda till. Måste vara unikt per skrivare.`},proxy:{accessCodeHint:`I proxyläge, använd din målskrivares åtkomstkod i slicern. Anslutningen vidarebefordras transparant till den riktiga skrivaren.`},addDialog:{title:`Lägg till virtuell skrivare`,name:`Namn`,hint:`Du kan konfigurera åtkomstkod, målskrivare och andra inställningar efter skapande.`,create:`Skapa`},deleteConfirm:{title:`Ta bort virtuell skrivare`,message:`Är du säker på att du vill ta bort "{{name}}"? Detta kommer att stoppa alla tjänster för denna skrivare.`}},modelViewer:{openInSlicer:`Öppna i slicer`,openInSlicerWith:`Öppna i {{slicer}}`,moreSlicerOptions:`Fler slicer-alternativ`,openInSlicerFailed:`Kunde inte öppna i slicer`,tabs:{model:`3D-modell`},notAvailable:`ej tillgänglig`,plates:`Plattor`,allPlates:`Alla plattor`,plateNumber:`Platta {{number}}`,plateCount:`{{count}} platta`,plateCount_other:`{{count}} plattor`,objectCount:`{{count}} objekt`,objectCount_other:`{{count}} objekt`,filamentCount:`{{count}} filament`,filamentCount_other:`{{count}} filament`,eta:`Beräknad tid: {{minutes}} min`,noPreview:`Ingen förhandsvisning tillgänglig för denna fil`,pagination:{pageOf:`Sida {{current}} av {{total}}`,prev:`Föregående`,next:`Nästa`},errors:{failedToLoad:`Kunde inte ladda fil`,noMeshes:`Inga nät hittade i 3MF-fil`,unsupportedFormat:`Filformatet stöds inte`}},maintenanceDescriptions:{lubricateCarbonRods:`Applicera smörjmedel på kolstänger för jämn rörelse`,lubricateRails:`Applicera smörjmedel på linjärskenor för jämn rörelse`,cleanNozzle:`Rengör varmblock och munstycke för att förhindra igensättning`,checkBelts:`Kontrollera remspänning för noggranna utskrifter`,cleanBuildPlate:`Rengör byggplatta för bättre vidhäftning`,checkExtruder:`Kontrollera extruderkugghjul för slitage`,checkCooling:`Se till att kylfläktar fungerar korrekt`,generalInspection:`Allmän skrivarkontroll`,cleanCarbonRods:`Rengör kolstänger för att minska friktion`,lubricateSteelRods:`Applicera smörjmedel på stålstänger för jämn rörelse`,cleanSteelRods:`Rengör stålstänger för att minska friktion`,cleanLinearRails:`Torka av linjärskenor för att ta bort damm och smuts`,checkPtfeTube:`Kontrollera PTFE-rör för slitage eller skador`,replaceHepaFilter:`Byt HEPA-filter för bättre luftkvalitet`,replaceCarbonFilter:`Byt aktivt kolfilter`,lubricateLeftNozzleRail:`Smörj vänster munstyckesskena (H2-serien)`},haSensors:{label:`Sensorer`,unavailable:`Ej tillgänglig`,blocksPrints:`{{entity}} — håller på utskrifter medan larmet är aktivt`,states:{open:`Öppen`,closed:`Stängd`,unlocked:`Olåst`,locked:`Låst`,detected:`Upptäckt`,clear:`Tom`,wet:`Blöt`,dry:`Torr`,problem:`Problem`,ok:`OK`,running:`Körs`,stopped:`Stoppad`,on:`På`,off:`Av`},sectionTitle:`Home Assistant-sensorer`,add:`Lägg till sensor`,addTitle:`Lägg till Home Assistant-sensor`,editTitle:`Redigera Home Assistant-sensor`,empty:`Inga sensorer än. Binda en dörrkontakt eller termometer från Home Assistant för att visa den på ett skrivarkort.`,unknownPrinter:`Okänd skrivare`,badgeBlocks:`Håller på utskrifter`,badgeNotifies:`Notiserar`,badgeHidden:`Dold på kort`,printer:`Skrivare`,entity:`Entitet`,searchPlaceholder:`Sök entiteter...`,noEntities:`Inga matchande entiteter`,name:`Visningsnamn`,alertWhen:`Larma när`,alertNever:`Aldrig — visa endast`,alertAbove:`Ovanför`,alertBelow:`Under`,alertHint:`Larmtillståndet markerar sensorn på skrivarkortet och aktiverar alternativen nedan.`,showOnCard:`Visa på skrivarkort`,notifyOnAlert:`Skicka en notis när larmet startar`,blockPrint:`Håll köade utskrifter medan larmet är aktivt`,blockPrintHint:`Jobb förblir köade och startar automatiskt när sensorn återgår till normalt. Ignoreras medan Home Assistant är otillgänglig.`,toast:{created:`Sensor tillagd`,updated:`Sensor sparad`,deleted:`Sensor borttagen`},error:{pickEntity:`Välj en Home Assistant-entitet`,nameRequired:`Ange ett visningsnamn`,printerRequired:`Välj en skrivare`,alertRequired:`Sätt ett larmvillkor först`}},locationHaSensors:{sectionTitle:`Home Assistant-sensorer (lagringsplatser)`,sectionDescription:`Bind Home Assistant-temperatur-, luftfuktighets- eller batterisensorer till dina lagringsplatser för att visa liveavläsningar på filamentkortet och i tabellen. Endast en sensor per kategori är tillåten per plats.`,add:`Lägg till sensor`,addTitle:`Lägg till Home Assistant-sensor`,editTitle:`Redigera Home Assistant-sensor`,empty:`Inga sensorer än. Bind en temperatur- eller luftfuktighetssensor från Home Assistant för att visa den på filamentkortet.`,unknownLocation:`Okänd plats`,location:`Lagringsplats`,showOnCard:`Visa på filamentkort`,overwriteConfirm:{title:`Ersätt befintlig sensor?`,messageTemperature:`"{{location}}" har redan en temperatursensor kopplad: {{name}}. Om du fortsätter kommer den att ersättas.`,messageHumidity:`"{{location}}" har redan en luftfuktighetssensor kopplad: {{name}}. Om du fortsätter kommer den att ersättas.`,messageBattery:`"{{location}}" har redan en batterisensor kopplad: {{name}}. Om du fortsätter kommer den att ersättas.`},autoAdd:{confirmTitle:`Lägg till de andra sensorerna också?`,confirmMessage:`Bambuddy hittade också andra sensorer för denna plats. Välj vilka du också vill lägga till.`,added:`Lade också till: {{names}}`,noneFound:`Inga matchande temperatur-, luftfuktighets- eller batterisensorer hittade för denna plats.`,onlyThisOne:`Endast denna`},options:{buttonLabel:`Sensoralternativ`,title:`Platssensoralternativ`,description:`Dessa värden används när en temperatur-, luftfuktighets- eller batterisensor binds automatiskt tillsammans med den första sensorn för en plats.`,generalSettings:`Allmänna inställningar`,pollInterval:`Uppdateringsintervall (sekunder)`,pollIntervalHint:`Hur ofta Bambuddy avfrågar Home Assistant och uppdaterar sensorvärden på skärmen. Minimum 60 sekunder.`,colorizeValues:`Färga sensorvärden enligt deras larmtröskelvärden`,aboveColor:`Färg för överstiget tröskelvärde`,belowColor:`Färg för understiget tröskelvärde`,optimalColor:`Färg för optimalt värde`,colors:{red:`Röd`,orange:`Orange`,yellow:`Gul`,green:`Grön`,blue:`Blå`,purple:`Lila`,pink:`Rosa`},saved:`Alternativ sparade`,saveFailed:`Kunde inte spara alternativ`,reset:`Återställ`,resetConfirm:{title:`Återställ alla befintliga platssensorer?`,message:`Detta skriver över larmtröskelvärden, notiser och kortsynlighet för alla befintliga lagringsplats-temperatur-, luftfuktighets- och batterisensorer med de värden som konfigurerats ovan, och återställer varje sensors namn till dess Home Assistant-vänliga namn — skrivarsensorer påverkas inte. Detta kan inte ångras. Beroende på hur många sensorer du har, kan detta ta en stund.`},resetDone:`Tillämpat på {{count}} plats-sensorer`,resetFailed:`Kunde inte återställa plats-sensorer`},deleteAllConfirm:{title:`Ta bort alla sensorer?`,message:`Detta tar bort alla {{count}} sensorer bundna till "{{location}}". Detta kan inte ångras.`},currentlyBound:`För närvarande kopplad: {{entity}}`,error:{locationRequired:`Välj en lagringsplats`},toast:{created:`Sensor tillagd`,updated:`Sensor sparad`,deleted:`Sensor borttagen`}},smartPlugs:{offline:`Offline`,admin:`Admin`,openPlugAdminPage:`Öppna kontakt-adminsida`,deleteSmartPlug:`Ta bort kontakt`,turnOnSmartPlug:`Sätt på kontakt`,turnOffSmartPlug:`Stäng av kontakt`,turnOn:`Sätt på`,turnOff:`Stäng av`,addSmartPlug:{scanningNetwork:`Söker i subnät...`,chooseEntity:`Välj en entitet...`,connectionFailed:`Kunde inte ansluta`,searchEntities:`Sök entiteter...`,searchPowerSensors:`Sök effektsensorer...`,searchEnergySensors:`Sök energisensorer...`,placeholders:{plugName:`Kontakt i vardagsrummet`,mqttStateOnValue:`PÅ, true, 1`,mqttSameAsPower:`Samma som effekttopik, eller annan`}},linkedTo:`Länkad till:`,monitorOnly:`Endast övervakning`,alerts:`Larm`,scheduleOn:`På {{time}}`,scheduleOff:`Av {{time}}`,on:`På`,off:`Av`,power:`Effekt`,kwhToday:`kWh idag`,settings:`Inställningar`,automationSettings:`Automatiseringsinställningar`,showInSwitchbar:`Visa i kontaktpanel`,quickAccessSidebar:`Snabbåtkomst från sidofält`,enabled:`Aktiverad`,enableAutomation:`Aktivera automatisering för denna kontakt`,autoOn:`Auto på`,autoOnDescription:`Sätt på när utskrift startar`,autoOff:`Auto av`,autoOffDescription:`Stäng av när utskrift slutförs (engångs)`,autoOffPersistent:`Håll aktiverad`,autoOffPersistentDescription:`Förblir aktiverad mellan utskrifter istället för engångs`,controlsPrinterPower:`Kontrollerar skrivarens ström`,controlsPrinterPowerDescription:`Stäng av om denna kontakt endast förser en tillbehörsenhet (filterfläkt, belysning). Annars markeras skrivaren som offline när den stängs av.`,autoOffAfterDrying:`Auto av efter torkning`,autoOffAfterDryingDescription:`Stäng av när AMS-torkning slutförs`,delayAfterDryingMinutes:`Torkningsfördröjning (minuter)`,turnOffDelayMode:`Avstängningsfördröjningsläge`,time:`Tid`,temp:`Temp`,delayMinutes:`Fördröjning (minuter)`,tempThreshold:`Temperaturtröskelvärde (°C)`,tempThresholdDescription:`Stäng av när munstycket svalnar under detta tröskelvärde`,edit:`Redigera`,deleteConfirm:`Är du säker på att du vill ta bort "{{name}}"? Detta kan inte ångras.`,turnOnConfirm:`Är du säker på att du vill sätta på "{{name}}"?`,turnOffConfirm:`Är du säker på att du vill stänga av "{{name}}"? Detta kommer att bryta strömmen till den anslutna enheten.`,failedToTurn:`Kunde inte {{action}} "{{name}}"`,unknown:`Okänd`,addTitle:`Lägg till kontakt`,editTitle:`Redigera kontakt`,stopScanning:`Stoppa sökning`,discoverTasmota:`Upptäck Tasmota-enheter`,foundDevices:`Hittade {{count}} enhet(er) — klicka för att välja:`,noDevicesFound:`Inga Tasmota-enheter hittade i ditt subnät`,haNotConfigured:`Home Assistant är inte konfigurerad. Ställ in det i`,haSettingsPath:`Inställningar → Nätverk → Home Assistant`,selectEntity:`Välj entitet *`,ipAddress:`IP-adress *`,nameLabel:`Namn *`,username:`Användarnamn`,password:`Lösenord`,authHint:`Lämna tomt om din Tasmota-enhet inte kräver autentisering`,linkToPrinter:`Länka till skrivare`,noPrinter:`Ingen skrivare (endast manuell kontroll)`,linkingDescription:`Länkning aktiverar automatisk på/av när utskrifter startar/slutförs`,powerAlerts:`Effektlarm`,alertAbove:`Larma om över (W)`,alertBelow:`Larma om under (W)`,alertDescription:`Få en notis när effektförbrukningen överskrider dessa tröskelvärden. Lämna tomt för att inaktivera det villkoret.`,dailySchedule:`Dagligt schema`,turnOnAt:`Sätt på klockan`,turnOffAt:`Stäng av klockan`,scheduleDescription:`Sätt automatiskt på/av kontakten vid dessa tider dagligen. Lämna tomt för att hoppa över den åtgärden.`,showOnPrinterCard:`Visa på skrivarkort`,displayOnPrinterCard:`Visa knapp på skrivarkort`,connectedResult:`Ansluten!`,deviceLabel:`Enhet: {{name}} - `,stateLabel:`Status: {{state}}`,test:`Test`,delete:`Ta bort`,save:`Spara`,add:`Lägg till`,cancel:`Avbryt`,failedToStartScan:`Kunde inte starta sökning`,nameRequired:`Namn krävs`,entityRequired:`Entitet krävs för Home Assistant-kontakter`,mqttTopicRequired:`Minst ett MQTT-ämne måste konfigureras för effekt, energi eller statusövervakning`,loadingEntities:`Laddar entiteter...`,loading:`Laddar...`,failedToLoadEntities:`Kunde inte ladda entiteter: {{error}}`,noEntitiesMatching:`Inga entiteter hittade som matchar "{{search}}"`,noEntitiesAvailable:`Inga entiteter tillgängliga`,searchingEntities:`Söker i alla entiteter ({{count}} hittade)`,showingEntities:`Visar switch, light, input_boolean ({{count}} tillgängliga)`,energyMonitoringOptional:`Energiövervakning (valfritt)`,energyMonitoringHint:`Sök och välj sensorer som tillhandahåller effekt-/energidata.`,powerSensorW:`Effektsensor (W)`,energyTodayKwh:`Energi idag (kWh)`,totalEnergyKwh:`Total energi (kWh)`,noMatchingSensors:`Inga matchande sensorer`,none:`Ingen`,mqttNotConfigured:`MQTT-mäklare inte konfigurerad. Ställ in mäklaradress i`,mqttSettingsPath:`Inställningar → Nätverk → MQTT-publicering`,mqttNotConfiguredSuffix:`(du behöver inte aktivera publicering, fyll bara i mäklaruppgifterna).`,mqttMonitorOnlyDescription:`MQTT-kontakter tar emot effekt-/energidata via MQTT-prenumeration. På/av-kontroll är inte tillgänglig — använd din MQTT-mäklare eller hemautomatiseringssystem.`,powerMonitoring:`Effektövervakning`,energyMonitoring:`Energiövervakning`,stateMonitoring:`Statusövervakning`,optional:`valfritt`,topic:`Topik`,jsonPath:`JSON-sökväg`,multiplier:`Multiplikator`,onValue:`PÅ-värde`,mqttPowerHint:`JSON-sökväg extraherar värde från JSON-nyttolast (t.ex. "power_l1"). Lämna tomt om ämnet publicerar råa numeriska värden.
+ON值：表示"ON"的確切字串。留空以自動檢測（ON、true、1）。`,restControl:`控制`,restOnUrl:`開啟 URL`,restOffUrl:`關閉 URL`,restOnBody:`開啟請求內容`,restOffBody:`關閉請求內容`,restMethod:`HTTP 方法`,restHeaders:`自訂標頭（JSON）`,restStatusUrl:`狀態 URL`,restStatusPath:`狀態 JSON 路徑`,restStatusOnValue:`ON 值`,restPowerUrl:`功率URL`,restPowerPath:`功率 JSON 路徑`,restPowerMultiplier:`功率乘數`,restEnergyUrl:`能耗URL`,restEnergyPath:`能耗 JSON 路徑（今日）`,restEnergyTotalPath:`能耗 JSON 路徑（累計值）`,restEnergyTotalMultiplier:`累計值倍數`,restEnergyTotalPathHint:`例如 aenergy.total`,restEnergyTotalHint:`許多插座（包括所有 Shelly）只提供永不歸零的累計計數值。該值應填在此處，而非上方欄位：若當作今日用量讀取，它在午夜不會歸零，而「昨日」與「總計」會一直是空的。Bambuddy 會據此推算「今日」與「昨日」，這需要一至兩天的取樣資料。Shelly 以瓦時為單位，因此倍數請填 0.001。`,restEnergyMultiplier:`能耗乘數`,restUrlRequired:`REST 插座至少需要一個 URL（ON 或 OFF）`,restHeadersHint:`例如：{"Authorization": "Bearer your-token"}`,restBodyHint:`例如：ON、{"state": "on"}`,restStatusHint:`用於輪詢目前狀態的 URL`,restPathHint:`例如：state 或 data.power.status`,restPowerUrlHint:`功率資料的獨立URL（留空則使用狀態URL）`,restEnergyUrlHint:`能耗資料的獨立URL（留空則使用狀態URL）`,restEnergyHint:`每個值可以使用獨立的URL，或回退到狀態 URL。使用乘數進行單位轉換（例如：0.001 將 Wh 轉換為 kWh）。`,testConnection:`測試連線`,connectionSuccess:`連線成功`,noSwitchesInSwitchbar:`開關欄中沒有開關`,enableSwitchbarHint:`在設定 > 智慧插座中啟用"在開關欄顯示"`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`電子郵件`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`SMTP 電子郵件通知`,telegram:`透過 Telegram 機器人傳送通知`,discord:`透過 Webhook 傳送到 Discord 頻道`,ntfy:`免費、可自託管的推送通知`,pushover:`簡單、可靠的推送通知`,callmebot:`透過 CallMeBot 免費傳送 WhatsApp 通知`,webhook:`通用 HTTP POST 到任意 URL`,homeassistant:`Home Assistant 儀表板中的持久通知`,bark:`透過 Bark 推送 iOS 通知（可自架伺服器）`},lastSuccess:`上次：{{date}}`,error:`錯誤`,printer:`印表機：`,allPrinters:`所有印表機`,sendTestNotification:`傳送測試通知`,eventSettings:`事件設定`,enabled:`已啟用`,sendFromProvider:`從此提供者傳送通知`,printEvents:`列印事件`,printerStatus:`印表機狀態`,amsAlarms:`AMS 警報`,amsHtAlarms:`AMS-HT 警報`,printQueue:`列印佇列`,start:`開始`,plateCheck:`熱床檢測`,complete:`完成`,failed:`失敗`,stopped:`已停止`,progress:`進度`,offline:`離線`,lowFilament:`耗材不足`,maintenance:`維護`,amsHumidity:`AMS 濕度`,amsTemp:`AMS 溫度`,amsDryingSuspended:`乾燥已暫停`,amsHtHumidity:`AMS-HT 濕度`,amsHtTemp:`AMS-HT 溫度`,bedCooled:`熱床已冷卻`,firstLayer:`首層完成`,quiet:`免打擾`,digest:`摘要 {{time}}`,printStarted:`列印已開始`,plateNotEmpty:`熱床非空`,plateNotEmptyDescription:`列印前偵測到物體`,plateClearRequired:`需要確認熱床已清空`,plateClearRequiredDescription:`列印完成，佇列等待熱床確認`,plateClear:`熱床確認`,printCompleted:`列印已完成`,bedCooledLabel:`熱床已冷卻`,bedCooledDescription:`列印後熱床溫度降至閾值以下`,firstLayerCompleteLabel:`首層列印完成`,firstLayerCompleteDescription:`首層完成時傳送帶照片的通知`,missingSpoolAssignmentLabel:`缺少料卷分配`,billingChargeFailedLabel:`計費失敗`,billingChargeFailedDescription:`無法記錄列印費用時通知`,missingSpoolAssignmentDescription:`當列印開始且所需料盤沒有分配料卷時傳送通知`,printFailed:`列印失敗`,printStopped:`列印已停止`,progressMilestones:`進度里程碑`,progressMilestonesDescription:`在 25%、50%、75% 時通知`,printerOffline:`印表機離線`,printerError:`印表機錯誤`,aiFailureDetection:`AI 失敗偵測`,aiFailureDetectionDescription:`當 Obico AI 偵測到可能的列印失敗時通知`,lowFilamentLabel:`耗材不足`,maintenanceDue:`需要維護`,maintenanceDueDescription:`需要維護時通知`,amsHumidityHigh:`AMS 濕度過高`,amsHumidityHighDescription:`普通 AMS 濕度超過閾值`,amsTemperatureHigh:`AMS 溫度過高`,amsTemperatureHighDescription:`普通 AMS 溫度超過閾值`,amsDryingSuspendedTitle:`自動乾燥已暫停`,amsDryingSuspendedDescription:`濕度始終未降到閾值以下，已放棄對某個 AMS 單元的自動乾燥`,amsHtHumidityHigh:`AMS-HT 濕度過高`,amsHtHumidityHighDescription:`AMS-HT 濕度超過閾值`,amsHtTemperatureHigh:`AMS-HT 溫度過高`,amsHtTemperatureHighDescription:`AMS-HT 溫度超過閾值`,inventoryAlerts:`庫存警報`,stockReorderAlert:`補貨警報`,stockReorderAlertDescription:`SKU 已達到補貨點`,stockBreakAlert:`斷貨警報`,stockBreakAlertDescription:`庫存將在補貨到達前耗盡`,jobAdded:`任務已新增`,jobAddedDescription:`任務已新增到佇列`,jobAssigned:`任務已分配`,jobAssignedDescription:`基於模型的任務已分配給印表機`,jobStarted:`任務已開始`,jobStartedDescription:`佇列任務已開始列印`,jobWaiting:`任務等待中`,jobWaitingDescription:`任務正在等待耗材或印表機`,jobSkipped:`任務已跳過`,jobSkippedDescription:`任務已跳過（上一個失敗）`,jobFailed:`任務失敗`,jobFailedDescription:`任務啟動失敗`,queueComplete:`佇列已完成`,queueCompleteDescription:`所有佇列任務已完成`,quietHours:`免打擾時段`,noNotificationsDuring:`在此時段內不傳送通知`,editProviderToChangeQuietHours:`編輯提供者以更改免打擾時段`,dailyDigest:`每日摘要`,batchNotifications:`將通知彙總為每日摘要`,sendAt:`傳送於 {{time}}`,editProviderToChangeDigestTime:`編輯提供者以更改摘要時間`,edit:`編輯`,deleteProvider:`刪除通知提供者`,deleteConfirm:`確定要刪除"{{name}}"嗎？此操作無法復原。`,delete:`刪除`,addTitle:`新增通知提供者`,editTitle:`編輯通知提供者`,nameLabel:`名稱 *`,namePlaceholder:`我的通知`,providerTypeLabel:`提供者類型 *`,configuration:`設定`,testConfiguration:`測試設定`,printerFilter:`印表機篩選`,onlyFromPrinter:`僅傳送來自此印表機的事件通知`,quietHoursDnd:`免打擾時段`,quietStart:`開始`,quietEnd:`結束`,dailyDigestLabel:`每日摘要`,sendDigestAt:`傳送摘要於`,digestCollected:`事件將被收集並在此時間作為單條摘要傳送`,notificationEvents:`通知事件`,progressPercent:`（25%、50%、75%）`,bedCooledAfterPrint:`（列印完成後）`,haSensorAlert:`印表機感測器警報`,haSensorAlertDescription:`（已綁定的 Home Assistant 感測器需要注意）`,locationHaSensorAlert:`存放位置感測器警報`,locationHaSensorAlertDescription:`（綁定至存放位置的 Home Assistant 感測器需要注意）`,eventPriority:{sectionTitle:`ntfy 優先級`,helpNtfy:`為每個已啟用的事件選擇優先級。ntfy 使用它來升級提醒（聲音、可見性、推播行為）。此處未設定的級別將使用 ntfy 伺服器預設值。`,min:`最低`,low:`低`,default:`預設`,high:`高`,urgent:`緊急`},cancel:`取消`,save:`儲存`,add:`新增`,nameRequired:`名稱為必填項`,fieldRequired:`{{field}}為必填項`,haDataInvalid:`Data 欄位必須是有效的 JSON 物件，例如 {"priority": "high", "ttl": 0}`,phoneNumber:`電話號碼`,apiKey:`API 金鑰`,serverUrl:`伺服器 URL`,topic:`主題`,authToken:`認證權杖`,userKey:`使用者金鑰`,appToken:`應用程式權杖`,priority:`優先順序`,pushoverRetry:`緊急重試 (秒)`,pushoverExpire:`緊急逾時 (秒)`,botToken:`機器人權杖`,chatId:`聊天 ID`,telegramThreadId:`論壇主題 ID`,telegramThreadIdHelp:`選填。傳送到論壇群組中的指定主題，即主題連結結尾的數字 (t.me/c/.../25)。留空則傳送到一般主題。`,telegramThreadIdInvalid:`論壇主題 ID 必須是數字。`,smtpServer:`SMTP 伺服器`,smtpPort:`SMTP 連接埠`,security:`安全`,authentication:`認證`,username:`使用者名稱`,password:`密碼`,fromEmail:`寄件人信箱`,toEmail:`收件人信箱`,webhookUrl:`Webhook URL`,payloadFormat:`負載格式`,authorization:`授權`,titleFieldName:`標題欄位名`,messageFieldName:`訊息欄位名`,editTemplate:`編輯範本：{{name}}`,titleLabel:`標題`,bodyLabel:`正文`,titlePlaceholder:`通知標題...`,bodyPlaceholder:`通知正文...`,availableVariables:`可用變數`,clickToInsert:`點選插入到正文游標位置`,livePreview:`即時預覽`,hide:`隱藏`,show:`顯示`,loadingPreview:`載入預覽中...`,enterTemplateContent:`輸入範本內容以檢視預覽`,titlePreview:`標題：`,bodyPreview:`正文：`,resetToDefault:`恢復預設`,titleRequired:`標題為必填項`,bodyRequired:`正文為必填項`,notificationLog:`通知日誌`,showFailedOnly:`僅顯示失敗`,last24Hours:`最近 24 小時`,last7Days:`最近 7 天`,last30Days:`最近 30 天`,last90Days:`最近 90 天`,justNow:`剛剛`,noFailedNotifications:`沒有失敗的通知`,noNotificationsLogged:`沒有通知紀錄`,unknownProvider:`未知提供者`,logTitle:`標題`,logMessage:`訊息`,logError:`錯誤`,logProvider:`提供者：{{type}}`,logTime:`時間：{{time}}`,refresh:`重新整理`,clearOld:`清除舊紀錄`,statsSummary:`最近 {{days}} 天：`,statsNotifications:`條通知`,statsSent:`{{count}} 條已傳送`,statsFailed:`{{count}} 條失敗`,eventTypes:{print_start:`列印已開始`,print_complete:`列印完成`,print_failed:`列印失敗`,print_stopped:`列印已停止`,print_progress:`進度`,printer_offline:`印表機離線`,printer_error:`印表機錯誤`,filament_low:`耗材不足`,maintenance_due:`需要維護`,test:`測試`},userEmail:{title:`通知`,emailNotifications:`郵件通知`,emailNotificationsDesc:`接收您自己列印任務的郵件通知。郵件將透過進階身份驗證中設定的 SMTP 設定傳送。`,sendingTo:`通知將傳送至`,noEmailWarning:`您的帳戶沒有郵件地址。請聯絡管理員新增。`,printJobNotifications:`列印任務通知`,printJobNotificationsDesc:`選擇哪些事件會觸發您提交的列印任務的郵件通知。`,printJobStarts:`列印任務開始`,printJobStartsDesc:`當您的列印任務開始時收到通知。`,printJobFinishes:`列印任務完成`,printJobFinishesDesc:`當您的列印任務成功完成時收到通知。`,printErrors:`列印錯誤`,printErrorsDesc:`當您的列印任務失敗或遇到錯誤時收到通知。`,printJobStops:`列印任務停止`,printJobStopsDesc:`當您的列印任務被取消或停止時收到通知。`,saveSuccess:`通知偏好設定已儲存。`,saveError:`儲存通知偏好設定失敗。`}},richTextEditor:{bold:`粗體`,italic:`斜體`,underline:`底線`,bulletList:`無序列表`,numberedList:`有序列表`,alignLeft:`左對齊`,alignCenter:`居中對齊`,alignRight:`右對齊`,addLink:`新增連結`,removeLink:`移除連結`},externalLinks:{title:`側邊欄連結`,sidebarLayout:`側邊欄`,sidebarLayoutDescription:`顯示或隱藏內建頁面、加入外部連結，並拖曳項目以重新排序側邊欄導覽。`,systemPages:`Bambuddy 頁面`,externalLinks:`外部連結`,visibleInSidebar:`顯示於側邊欄`,hiddenFromSidebar:`隱藏於側邊欄`,requiredInSidebar:`側邊欄中必須顯示`,hidePage:`隱藏頁面`,showPage:`顯示頁面`,settingsCannotBeHidden:`設定無法隱藏`,noLinksConfigured:`未設定外部連結`,deleteLink:`刪除連結`,removeCustomIcon:`移除自訂圖示`,openInNewTab:`在新標籤頁中開啟`,placeholders:{linkName:`我的連結`}},keyboardShortcuts:{title:`鍵盤快捷鍵`,navigation:`導航`,archivesSection:`歸檔`,kProfilesSection:`K 值設定`,generalSection:`通用`,shortcuts:{goToPrinters:`前往印表機`,goToArchives:`前往歸檔`,goToQueue:`前往佇列`,goToStats:`前往統計`,goToProfiles:`前往雲端設定`,goToSettings:`前往設定`,focusSearch:`聚焦搜尋`,openUploadModal:`開啟上傳對話方塊`,clearSelection:`清除選擇 / 取消焦點`,contextMenu:`卡片右鍵選單`,refreshProfiles:`重新整理設定`,newProfile:`新增設定`,exitSelectionMode:`結束選擇模式`,showHelp:`顯示此協助`},footer:`按 Esc 或點選外部關閉`},notificationLog:{title:`通知日誌`,events:{printStarted:`列印開始`,printComplete:`列印完成`,printFailed:`列印失敗`,printStopped:`列印停止`,progress:`進度`,printerOffline:`印表機離線`,printerError:`印表機錯誤`,lowFilament:`耗材不足`,maintenanceDue:`維護到期`,test:`測試`},timeAgo:{justNow:`剛剛`,minutesAgo:`{{minutes}} 分鐘前`,hoursAgo:`{{hours}} 小時前`}},restoreBackup:{title:`恢復備份`,restoring:`恢復中...`,restoreComplete:`恢復完成`,restoreFailed:`恢復失敗`,importSettings:`從備份檔案匯入設定`,pleaseWait:`請稍候，正在恢復您的資料`,clickToSelect:`點選選擇備份檔案（.json 或 .zip）`,howDuplicateHandling:`重複處理方式：`,categories:{printers:`印表機`,smartPlugs:`智慧插座`,notificationProviders:`通知提供者`,filaments:`耗材`,archives:`歸檔`,pendingUploads:`待處理上傳`,settingsTemplates:`設定和範本`},matchingInfo:{printers:`按序列號匹配`,smartPlugs:`按 IP 位址匹配`,notificationProviders:`按名稱匹配`,filaments:`按名稱 + 類型 + 品牌匹配`,archives:`按內容雜湊匹配`,pendingUploads:`按檔名匹配`,settingsTemplates:`始終覆蓋`},replaceExisting:`替換現有資料`,keepExisting:`保留現有資料`,replaceDescription:`用備份資料覆蓋已存在的項目`,keepDescription:`僅恢復不存在的項目`,caution:`注意：`,cautionText:`覆蓋將用備份資料替換您目前的設定。出於安全考慮，印表機存取碼永遠不會被覆蓋。`,itemsRestored:`已恢復項目`,itemsSkipped:`已跳過項目`,restored:`已恢復`,skipped:`已跳過（已存在）`,filesLabel:`檔案（3MF、縮圖等）`,newApiKeysGenerated:`已產生新 API 金鑰`,newApiKeysWarning:`這些金鑰僅顯示一次。請立即複製！`,processingBackup:`處理備份檔案中...`,noDataFound:`備份檔案中未找到可恢復的資料。`,failedToRestore:`恢復備份失敗。請檢查檔案格式。`},backupExport:{title:`匯出備份`,selectData:`選擇要包含的資料`,selectAll:`全選`,selectNone:`全不選`,categoryDescriptions:{settings:`語言、主題、更新偏好`,notifications:`ntfy、Pushover、Discord 等`,templates:`自訂訊息範本`,smartPlugs:`Tasmota 插座設定`,externalLinks:`側邊欄外部服務連結`,printers:`印表機資訊（不含存取碼）`,plateDetection:`空列印板參考影像`,filaments:`耗材類型和成本`,maintenance:`自訂維護計畫`,archives:`所有列印資料 + 檔案（3MF、縮圖、照片）`,projects:`專案、材料清單和附件`,pendingUploads:`虛擬印表機待審核的上傳`,apiKeys:`Webhook API 金鑰（匯入時產生新金鑰）`},requiresPrinters:`需要選擇印表機`,zipFileWarning:`將建立 ZIP 檔案。`,zipFileDescription:`包括所有 3MF 檔案、縮圖、縮時攝影和照片。這可能需要一些時間並產生較大的檔案。`,includeAccessCodes:`包含存取碼`,includeAccessCodesDescription:`用於轉移到另一臺機器`,includeAccessCodesWarning:`存取碼將以明文形式包含。請妥善保管此備份檔案！`,categoriesSelected:`已選擇 {{selectedCount}} 個類別`},pendingUploads:{placeholders:{notes:`新增關於此列印的備註...`},discardUpload:`丟棄上傳`,archiveAllUploads:`歸檔所有上傳`,discardAllUploads:`丟棄所有上傳`,archive:`歸檔`,timeAgo:{justNow:`剛剛`,minutesAgo:`{{minutes}} 分鐘前`,hoursAgo:`{{hours}} 小時前`,daysAgo:`{{days}} 天前`}},apiBrowser:{placeholders:{requestBody:`JSON 請求體...`,searchEndpoints:`搜尋端點...`}},configureAmsSlot:{title:`設定 AMS 槽位`,slotConfigured:`槽位已設定！`,configuringSlot:`正在設定槽位：`,slotLabel:`{{ams}} 槽位 {{slot}}`,searchPresets:`搜尋預設...`,colorPlaceholder:`顏色名稱或十六進位（例如：棕色、FF8800）`,clearCustomColor:`清除自訂顏色`,noCloudPresets:`無雲端預設。登入拓竹雲以同步。`,noPresetsAvailable:`無可用預設。登入拓竹雲或匯入本機設定。`,noMatchingPresets:`未找到匹配的預設。`,custom:`自訂`,builtin:`內建`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`設定已傳送到印表機`,filamentProfile:`耗材設定`,kProfileLabel:`K 值設定（壓力推進）`,filteringFor:`篩選：{{material}}`,noKProfile:`無 K 值設定（使用預設值 0.020）`,noMatchingKProfiles:`未找到匹配的 K 值設定。將使用預設 K=0.020。`,otherKProfiles:`此印表機上的其他 K 值設定`,selectFilamentFirst:`請先選擇耗材設定`,kFromCalibration:`K={{value}}（來自印表機校準）`,customColorLabel:`自訂顏色（可選）`,presetColors:`{{name}} 顏色：`,showLessColors:`顯示更少顏色`,showMoreColors:`顯示更多顏色`,clear:`清除`,hexLabel:`十六進位：#{{hex}}`,resetting:`重設中...`,resetSlot:`重設槽位`,cancel:`取消`,configuring:`設定中...`,configureSlot:`設定槽位`},githubBackup:{title:`Git 備份`,history:`歷史`,downloadBackup:`下載備份`,restoreBackup:`恢復備份`,noBackupsYet:`尚無備份`},emailSettings:{placeholders:{fromName:`Bambuddy`}},tagManagement:{searchTags:`搜尋標籤...`,renameTag:`重新命名標籤`,deleteTag:`刪除標籤`},notificationTemplates:{placeholders:{title:`通知標題...`,body:`通知正文...`}},batchTag:{placeholders:{newTag:`輸入新標籤...`}},photoGallery:{deletePhoto:`刪除照片`},filamentHoverCard:{copySpoolUuid:`複製耗材 UUID`},kProfilesView:{hasNote:`有備註`,copyProfile:`複製設定`},layout:{openMenu:`開啟選單`,noPermissionSystemInfo:`您沒有檢視系統資訊的權限`},dashboard:{dragToReorder:`拖曳以重新排列`,hideWidget:`隱藏小工具`},notificationProviderCard:{deleteNotificationProvider:`刪除通知提供者`},fileManagerModal:{closeFileManager:`關閉檔案管理器`,sortFiles:`排序檔案`,goToParentFolder:`返回上級資料夾`,threeView:`3D 檢視`},embeddedCameraViewer:{refreshStream:`重新整理流`,close:`關閉`,zoomOut:`縮小`,resetZoom:`重設縮放`,zoomIn:`放大`,dragToResize:`拖曳調整大小`},timelapseViewer:{skipBack5s:`後退 5 秒`,skipForward5s:`前進 5 秒`},notificationProviders:{descriptions:{email:`SMTP 郵件通知`,telegram:`透過 Telegram 機器人通知`,discord:`透過 Webhook 傳送到 Discord 頻道`,ntfy:`免費、可自託管的推送通知`,pushover:`簡單、可靠的推送通知`,callmebot:`透過 CallMeBot 的免費 WhatsApp 通知`,webhook:`通用 HTTP POST 到任意 URL`}},logViewer:{searchPlaceholder:`搜尋訊息或日誌名稱...`,noLogEntries:`未找到日誌條目`},switchbarPopover:{noSwitchesInSwitchbar:`切換欄中沒有開關`},projectPageModal:{placeholders:{title:`標題`,designer:`設計師`,license:`許可證`,description:`輸入描述...`,profileTitle:`設定標題`,profileDescription:`設定描述...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`等待中`,justNow:`剛剛`,now:`現在`,minsAgo:`{{count}} 分鐘前`,inMins:`{{count}} 分鐘後`,hoursAgo:`{{count}} 小時前`,inHours:`{{count}} 小時後`,daysAgo:`{{count}} 天前`,inDays:`{{count}} 天後`},spoolbuddy:{nav:{dashboard:`儀表板`,ams:`AMS`,inventory:`庫存`,writeTag:`寫入`,settings:`設定`},status:{nfcReady:`NFC 就緒`,nfcOff:`NFC 關閉`,offline:`離線`,online:`線上`,noPrinters:`無印表機`,deviceOffline:`裝置離線`,waitingConnection:`等待裝置連線...`,systemReady:`系統就緒`,status:`狀態`},dashboard:{readyToScan:`準備掃描`,idleMessage:`將耗材放在磅秤上以識別`,nfcHint:`NFC 標籤將自動讀取`,device:`裝置`,syncWeight:`同步重量`,weightSynced:`已同步！`,unknownTag:`未知標籤`,newTag:`偵測到新標籤`,onScale:`在磅秤上`,linkSpool:`連結到耗材`,linkTagTitle:`將標籤連結到耗材`,linkTag:`連結標籤`,selectSpool:`選擇要連結此標籤的耗材：`,noUntagged:`未找到沒有標籤的耗材`,tagDetected:`偵測到標籤`,noTag:`無標籤`,tagId:`標籤`,grossWeight:`毛重`,spoolSize:`耗材盤尺寸`,close:`關閉`,currentSpool:`目前耗材`,plateReady:`熱床就緒: {{name}}`,plateReadyLabel:`待清理的熱床`,plateClearAction:`清理`,plateClearedToast:`已將熱床標記為已清理`,plateClearFailed:`無法將熱床標記為已清理`},modal:{spoolDetected:`偵測到耗材`,assignToAms:`分配到 AMS`,syncWeight:`同步重量`,weightSynced:`已同步！`,syncing:`同步中...`,newTagDetected:`偵測到新標籤`,addToInventory:`新增到庫存`,assignToAmsTitle:`分配到 AMS`,selectSlot:`選擇槽位`,assign:`分配`,assigning:`分配中...`,assignSuccess:`已分配！`,assignPendingInsert:`已分配。插入耗材後將設定槽位。`,assignError:`分配耗材失敗。請重試。`,noPrinterSelected:`選擇印表機...`,noAmsDetected:`此印表機未偵測到 AMS`,slot:`槽位`},weight:{noReading:`無讀數`,stable:`穩定`,measuring:`測量中...`,tare:`去皮`,calibrate:`校準`},spool:{remaining:`剩餘`,material:`材料`,brand:`品牌`,color:`顏色`,coreWeight:`軸心重`,labelWeight:`標籤重`,scaleWeight:`磅秤重`,netWeight:`淨重`,lastUsed:`上次使用`,unknownColor:`未知顏色`},ams:{noData:`未偵測到 AMS`,connectAms:`連線 AMS 以檢視耗材槽位`,noPrinter:`未選擇印表機`,selectPrinter:`從頂部欄選擇印表機`,printerDisconnected:`印表機已斷開`,humidity:`濕度`,level:`餘量`,active:`活躍`,slot:`槽位`,empty:`空`},inventory:{search:`搜尋耗材...`,empty:`庫存中沒有耗材`,noResults:`沒有匹配的耗材`,spools:`個耗材`,addSpool:`新增耗材`},settings:{tabDevice:`裝置`,tabDisplay:`顯示`,tabScale:`磅秤`,tabUpdates:`更新`,nfcReader:`NFC 讀卡器`,type:`類型`,connection:`連線`,notConnected:`不適用`,deviceInfo:`裝置資訊`,hostname:`主機`,uptime:`執行時間`,systemConfig:`後端與認證`,backendUrl:`Bambuddy 後端 URL`,apiToken:`API 權杖`,apiTokenPlaceholder:`輸入 API 權杖`,saveConfig:`儲存設定`,systemQueued:`設定已加入佇列。`,nfcDiagnostic:`NFC 診斷`,scaleDiagnostic:`磅秤診斷`,readTagDiagnostic:`讀取標籤診斷`,testNfc:`測試讀卡器`,testScale:`測試精度`,testReadTag:`讀取標籤`,systemFieldsRequired:`後端 URL 為必填項。`,brightness:`亮度`,saved:`已儲存`,noBacklight:`未偵測到 DSI 背光。亮度控制需要 DSI 螢幕。`,screenBlank:`螢幕熄滅超時`,screenBlankDesc:`不活動後螢幕關閉。觸控喚醒。`,displayNote:`亮度作為軟體濾鏡套用。`,scaleCalibration:`磅秤校準`,currentWeight:`目前重量`,tareOffset:`去皮`,calFactor:`係數`,knownWeight:`已知重量`,calStep1:`移除磅秤上所有物品並按設定零點。`,calStep2:`將已知重量放在磅秤上。`,setZero:`設定零點`,calibrateNow:`校準`,calibrated:`已校準`,tareSet:`去皮命令已傳送。等待裝置回應...`,tareComplete:`去皮完成！`,tareTimedOut:`去皮逾時 — SpoolBuddy 守護程序是否正在執行？`,tareFailed:`傳送去皮命令失敗`,zeroSet:`零點已設定。將已知重量放在磅秤上。`,calibrationDone:`校準完成！`,calibrationFailed:`校準失敗`,lastCalibrated:`上次校準`,stable:`穩定`,settling:`穩定中...`,firmware:`韌體`,scale:`磅秤`,noDevice:`未找到 SpoolBuddy 裝置`,daemonVersion:`守護程式版本`,currentVersion:`目前`,versionPending:`等待守護程式...`,checking:`檢查中...`,checkUpdates:`檢查更新`,updateAvailable:`有可用更新`,updateInstructions:`透過 SSH 更新：執行 SpoolBuddy 安裝腳本進行升級。`,upToDate:`已是最新`,includeBeta:`包含測試版本`},writeTag:{tabExisting:`現有耗材`,tabNew:`新耗材`,tabReplace:`替換標籤`,searchPlaceholder:`按材料、顏色、品牌搜尋...`,noUntaggedSpools:`沒有無標籤的耗材`,noTaggedSpools:`沒有有標籤的耗材`,selectSpool:`選擇一個耗材，然後將空白 NTAG 放在讀卡器上`,placeTag:`將 NTAG 放在讀卡器上`,tagReady:`偵測到標籤 — 準備寫入`,writeTag:`寫入標籤`,replaceTag:`替換標籤`,writing:`寫入標籤中...`,waiting:`等待 SpoolBuddy...`,writeSuccess:`標籤寫入成功！`,writeFailed:`寫入失敗`,queueFailed:`佇列寫入命令失敗`,tryAgain:`重試`,cancel:`取消`,replaceWarning:`舊標籤將被取消連結。新標籤將替換它。`,deviceOffline:`SpoolBuddy 離線`,material:`材料`,colorName:`顏色名稱`,color:`顏色`,brand:`品牌`,weight:`重量 (g)`,createSpool:`建立耗材`,creating:`建立中...`,spoolCreated:`耗材已建立！準備寫入。`,createFailed:`建立耗材失敗`,incompleteDataWarning:`已使用不完整的Spoolman資料寫入標籤`},quickMenu:{printerPower:`印表機電源`,systemControls:`系統`,restartDaemon:`重新啟動守護程式`,restartBrowser:`重新啟動瀏覽器`,reboot:`重新開機`,shutdown:`關機`,swipeToClose:`向下滑動關閉`,confirmTitle:`確認`,confirmShutdown:`確定要關閉 SpoolBuddy 嗎？您需要實體存取才能重新開啟。`,confirmReboot:`確定要重新開機 SpoolBuddy 嗎？`,confirmRestartDaemon:`重新啟動 SpoolBuddy 守護程式？NFC 和磅秤將暫時不可用。`,confirmRestartBrowser:`重新啟動kiosk瀏覽器？螢幕將短暫變黑。`,confirm:`確認`,confirmPlugOn:`開啟 {{name}}？`,confirmPlugOff:`關閉 {{name}}？`,turnOn:`開啟`,turnOff:`關閉`}},diagnostic:{modalTitle:`連線診斷 — {{name}}`,running:`正在執行診斷...`,runningElapsed:`正在執行診斷... ({{elapsed}}秒)`,waitingForReportHint:`正在等待印表機發佈狀態報告 — 最長可能需要 {{max}} 秒。`,runFailed:`無法執行診斷：{{error}}`,retry:`重新執行`,runButton:`執行診斷`,sectionTitle:`連線診斷`,sectionDescription:`檢查印表機無法連線或無法列印的原因 — 連接埠可達性、LAN 開發者模式、Docker 網路模式與認證資訊。`,noPrinters:`未設定印表機。`,overall:{ok:`未發現問題 — 印表機連線看起來正常。`,warnings:`印表機應該可以運作，但有些項目需要注意。`,problems:`發現了可解釋印表機無法連線或無法列印的問題。`},check:{port_mqtt:{title:`控制連接埠（MQTT 8883）`,pass:`可達 — 印表機正在接受控制連線。`,fail:`連接埠 8883 無法連線。印表機已關機、IP 位址不同，或被防火牆封鎖。請核實印表機 IP，並確保沒有任何東西封鎖連接埠 8883。`},port_ftps:{title:`檔案傳輸連接埠（FTPS 990）`,pass:`可達 — 傳送列印檔案將正常運作。`,warn:`連接埠 990 無法連線。監控可能仍然有效，但向印表機傳送列印工作將失敗。請確保連接埠 990 未被封鎖。`,warn_no_tls:`連接埠 990 已開放，但印表機的檔案服務未能完成 TLS 交握。無法取得列印檔案、封面圖與縮時影片，因此封存會維持空白。請重新啟動印表機 — 解除連接埠封鎖並無幫助。`},external_storage:{title:`將傳送的檔案儲存在外部儲存中（安裝步驟 4）`,pass:`印表機回報此選項已開啟 — 傳送的檔案將儲存在 SD 卡上，封存將包含縮圖和切片機中繼資料。`,fail:`印表機回報此選項已關閉。請啟用「將傳送的檔案儲存在外部儲存中」 — 在較新韌體 (P2S 01.02 / Bambu Studio 2.6+) 中，開關位於印表機的列印設定中；在較舊版本中位於 Bambu Studio / OrcaSlicer 的裝置分頁中。如果未啟用此選項，每次封存的列印都將沒有縮圖也沒有切片機中繼資料。`,skip:`未檢查 — 需要有效的 MQTT 連線。在該設定僅存在於切片機中的較舊切片機上，印表機不會回報此設定，因此即使選項已關閉，此檢查也會通過 — 請手動驗證安裝步驟 4。`,skip_unsupported_model:`此型號有 SD 卡槽，但無法開啟該選項 — 目前 P1 系列韌體不會在 Bambu Studio 中顯示此開關，且印表機沒有螢幕。這裡無需修復；在 Bambu Lab 透過韌體加入支援之前，封存的列印可能缺少縮圖和切片中繼資料。`,fail_no_media:`該選項已開啟，但印表機的插槽中未偵測到記憶卡或隨身碟，傳送的檔案無處存放。插入一個再列印一次 — 在此之前，每一次歸檔的列印都會缺少縮圖與切片中繼資料。`,warn_internal_storage:`該選項已開啟且儲存媒體在位，但上一次列印仍進入了 Bambuddy 無法讀取的印表機內部儲存。在 H2 系列、P2S 與 X2D 上，無論此選項如何設定，Bambu Studio 的「列印」按鈕總是傳送到那裡。列印會帶著名稱與時間歸檔，但沒有縮圖與切片中繼資料。要取得完整歸檔，請從 Bambuddy 啟動列印、改用 OrcaSlicer 切片，或在 Bambu Studio 中用「傳送」選擇「外部儲存」後再啟動列印。`,warn_internal_history:`該選項已開啟，儲存媒體也在，但最近一次列印來自印表機裡既有的檔案 — 從它的螢幕重新列印、從 Handy 啟動，或是先前傳送過的檔案。這個檔案庫位於 Bambuddy 讀不到的內部儲存中，而且任何設定都改變不了，因為那次列印根本沒有傳送過檔案。它仍會帶著名稱與時間歸檔，但沒有縮圖與切片中繼資料。要獲得完整歸檔，請從 Bambuddy 啟動列印，或從切片軟體傳送。`},port_rtsps:{title:`攝影機連接埠（{{protocol}} {{port}}）`,pass:`可達 — 攝影機串流將正常運作。`,warn:`連接埠 {{port}} 無法連線。即時攝影機檢視將無法運作。這不影響列印。`},macos_local_network:{title:`macOS 本地網路權限`,pass:`macOS 已允許 Bambuddy 存取本地網路。`,warn_unsigned:`執行 Bambuddy 的 Python 沒有程式碼簽章，macOS 因此無法將本地網路權限繫結到任何身分，會靜默丟棄所有連往印表機的連線——既沒有錯誤，也不會出現授權提示。請執行會完成簽章的 Bambuddy 更新指令碼 (install/update_macos.sh)，然後重新啟動 Bambuddy。直譯器：{{executable}}`,warn_permission:`若印表機已開機且可透過此位址連線，請開啟 系統設定 > 隱私權與安全性 > 本地網路，確認 Bambuddy 使用的 Python 已啟用。未啟用時 macOS 會靜默丟棄本地連線，而且更新 Python 可能不會保留原有授權。`},network_mode:{title:`容器網路模式`,genericRuntime:`容器`,pass:`正在 {{runtime}} 中以 host 網路執行。`,warn:`Bambuddy 正在 {{runtime}} 中以 bridge 網路執行。印表機探索與虛擬印表機需要 host 網路 — 請使用 host 網路重新建立容器（docker-compose 中為 "network_mode: host"，Podman 中為 "--network=host"）。`,skip:`未在容器中執行 — 不適用。`,skip_unknown:`Bambuddy 正在 {{runtime}} 中執行，但無法判斷其網路模式。如果印表機探索或虛擬印表機無法使用，請使用 host 網路重新建立容器。`,skip_system_container:`Bambuddy 正在 {{runtime}} 系統容器中執行，它像虛擬機器一樣直接位於區域網路中 — 不適用。`},subnet:{title:`網路子網路`,pass:`印表機與 Bambuddy 位於同一子網路。`,warn:`印表機（{{printer_ip}}）與 Bambuddy（{{host_ip}}）位於不同的子網路。除非設定了子網路之間的路由，否則它們可能無法互相連線。`,skip:`無法判定子網路 — 已略過。`},mqtt_auth:{title:`印表機認證資訊`,pass:`印表機已接受連線。`,fail:`印表機可達，但 Bambuddy 未與其建立連線。存取碼或序號很可能有誤 — 每次切換僅區域網路模式或開發者模式時存取碼都會變更，請從印表機螢幕重新複製。正在重新啟動或已達到同時連線數上限的印表機看起來也是這樣。`,fail_auth_rejected:`印表機拒絕了 Bambuddy 的認證資訊。存取碼或序號有誤 — 每次切換僅區域網路模式或開發者模式時存取碼都會變更。請從印表機螢幕重新複製，並儲存到印表機設定中。`,skip:`未檢查 — 無法連線到印表機。`},developer_mode:{title:`LAN 開發者模式`,pass:`開發者模式已啟用。`,fail:`印表機上的開發者模式已關閉。請在印表機的 LAN 設定中啟用它 — 並按 OK 確認。否則列印將無法開始。`,skip:`無法檢查 — 需要與印表機的即時連線。`},printer_publishing:{title:`印表機正在發佈狀態`,pass:`印表機正在發佈狀態更新 — AMS、耗材和 K 配置將正確鏡像到切片軟體。`,fail:`MQTT 代理已接受連線，但印表機未發佈任何狀態報告。這幾乎總是因為序號錯誤或大小寫不一致 — device/<serial>/report 主題區分大小寫。請將印表機設定中的序號與印表機螢幕上的顯示進行核對。`,skip:`無法檢查 — 需要與印表機的即時連線。`}}},systemHealth:{sectionTitle:`系統健康`,sectionDescription:`掃描最近的日誌以找出已知問題，在它們演變成支援工單之前，通常你可以自行解決。`,rescan:`重新掃描`,clean:`在最近 {{times}} 筆日誌中未發現已知問題。`,logUnavailable:`檔案日誌記錄已停用，因此無法掃描日誌。請啟用檔案日誌以使用此檢查。`,learnMore:`如何解決`,fixLabel:`解決方法：`,occurrences:`出現 {{times}} 次 — 最近一次 {{lastSeen}}`,category:{layer8:`你可以自行解決`,environment:`環境`,bug:`請回報此問題`},signature:{"ftp-auth-rejected":{name:`印表機拒絕了存取碼`,cause:`印表機拒絕了檔案傳輸登入。存取碼錯誤，或在切換開發者模式後已變更。`,fix:`從印表機螢幕（區域網路設定）重新複製存取碼，並在 Bambuddy 的印表機設定中更新。`},"ftp-connection-timeout":{name:`檔案傳輸連線逾時`,cause:`Bambuddy 無法連線印表機的檔案傳輸連接埠（FTPS 990）。該連接埠被封鎖，或印表機已關機或位於其他子網路。`,fix:`請確認 Bambuddy 與印表機之間的 990 連接埠未被封鎖，且兩者位於同一網路。`},"ftp-ssl-error":{name:`安全檔案傳輸交握失敗`,cause:`印表機的檔案服務在 990 連接埠上未使用 TLS 回應。其檔案伺服器已卡住，這是印表機端的故障，與防火牆或韌體無關。`,fix:`請重新啟動印表機。在此之前無法取得列印檔案、封面圖和縮時影片；列印本身不受影響。`},"bambu-cloud-captcha":{name:`Bambu Cloud 要求進行 CAPTCHA 驗證`,cause:`Bambu 的防濫用機制正在驗證此網路，因此無法完成 Bambu Cloud 登入。這與公開 IP 位址有關，與你的帳號或此安裝無關。`,fix:`請等待：通常幾小時後會自動解除，反覆登入只會延長時間。在此期間，可使用從瀏覽器工作階段取得的存取權杖登入。`},"mqtt-connection-flapping":{name:`印表機連線反覆中斷`,cause:`控制連線（MQTT 8883）反覆中斷並重新連線——通常是網路訊號弱或連接埠被部分封鎖所致。`,fix:`請檢查印表機附近的 Wi-Fi 訊號，盡量使用有線連線，並確認 8883 連接埠能夠穩定連線。`},"camera-connection-refused":{name:`無法存取攝影機串流`,cause:`無法在 RTSPS 322 連接埠連線即時攝影機。該連接埠被封鎖，或印表機上的攝影機或區域網路即時影像已關閉。`,fix:`請在印表機上啟用攝影機和區域網路即時影像，並確認 322 連接埠未被封鎖。這不會影響列印。`},"database-locked":{name:`資料庫寫入衝突`,cause:`在負載下 SQLite 資料庫出現 "database is locked" 錯誤——同時使用多台印表機時較為常見。`,fix:`請將 Bambuddy 切換到外部 PostgreSQL 資料庫。參見文件中的 PostgreSQL 指南。`}}},vpDiagnostic:{title:`設定檢查 — {{name}}`,runButton:`執行設定檢查`,running:`正在執行設定檢查...`,runFailed:`無法執行設定檢查：{{error}}`,retry:`重新執行`,overall:{ok:`所有檢查均已通過 — 此虛擬印表機已正確設定。`,warnings:`虛擬印表機應該可以運作，但有些方面需要注意。`,problems:`發現的問題可以解釋切片軟體為何無法看到或使用此虛擬印表機。`},check:{enabled:{title:`虛擬印表機已啟用`,fail:`此虛擬印表機已關閉。請將其開啟以使其可被探索。`},running:{title:`服務正在執行`,fail:`虛擬印表機已啟用，但其服務未執行。請檢查 Bambuddy 記錄 — 通常是繫結 IP 衝突或權限錯誤使其停止。`},bind_interface:{title:`繫結網路介面`,fail:`繫結介面未設定，或在此主機上已不存在。請在「繫結介面」下拉選單中選擇一個目前的介面。`},access_code:{title:`已設定存取碼`,fail:`未設定存取碼。必須向切片軟體提供與您在此處設定的相同的 8 位存取碼。`},target_printer:{title:`目標印表機`,fail:`未選擇目標印表機。代理模式需要一台實際的印表機進行轉送。`,warn:`目標印表機目前處於離線狀態 — 重新連線後將恢復轉送。`},port_ftps:{title:`檔案上傳服務（連接埠 {{port}}）`,fail:`繫結 IP 的連接埠 {{port}} 上沒有任何監聽，因此切片軟體無法上傳檔案。通常是此介面上的連接埠衝突所致。`},port_mqtt:{title:`控制服務（連接埠 {{port}}）`,fail:`繫結 IP 的連接埠 {{port}} 上沒有任何監聽，因此切片軟體無法連線或顯示狀態。`},port_bind:{title:`探索服務（連接埠 {{port}}）`,fail:`繫結 IP 的連接埠 {{port}} 上沒有任何監聽，因此切片軟體的探索交握會失敗。`},privileged_ports:{title:`特權連接埠繫結`,fail:`連接埠 {{port}} 低於 1024，而此服務沒有繫結它的權限，這正是上面沒有任何項目在接聽的原因。請在 /etc/systemd/system/bambuddy.service 中加入 AmbientCapabilities=CAP_NET_BIND_SERVICE 並重新啟動，或執行 "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))"。使用 Docker 時請加入 cap_add: [NET_BIND_SERVICE]。`},certificate:{title:`TLS 憑證`,pass:`憑證已就緒。請確保已將 Bambuddy CA 憑證（上方）匯入切片軟體的信任庫。`,fail:`此虛擬印表機的 TLS 憑證遺失。請檢查 Bambuddy 資料目錄是否可寫入。`}}},bugReport:{logHealthSummary:`在你的日誌中發現了已知問題`,logHealthIntro:`最近的日誌與已知問題相符。請查看下方的解決方法——解決它們可能無需提交錯誤報告即可解決你的問題。你仍然可以在下方提交報告。`,title:`報告錯誤`,description:`描述`,descriptionPlaceholder:`出了什麼問題？請描述問題...`,email:`信箱（可選）`,emailPlaceholder:`your@email.com`,emailPrivacy:`如果提供，您的信箱將包含在GitHub Issue的摺疊部分中，以便維護者後續跟進。`,screenshot:`截圖`,uploadOrPaste:`上傳、貼上或拖曳圖片`,dataCollectedSummary:`報告中包含哪些資料？`,dataIncluded:`包含：`,dataIncludedList:`應用程式版本、作業系統、架構、Python版本、資料庫統計（僅計數）、印表機型號、噴嘴數量、韌體版本、連線狀態、整合狀態（Spoolman、MQTT、HA）、非敏感設定、網路介面數量、Docker詳情、依賴版本。`,dataNeverIncluded:`絕不包含：`,dataNeverIncludedList:`印表機名稱、序列號、存取碼、密碼、IP 位址、信箱地址、API金鑰、權杖、Webhook URL、主機名稱或使用者名稱。`,submit:`提交`,startLogging:`開始偵錯日誌`,stepEnableLogging:`偵錯日誌已啟用`,stepReproduce:`請現在重現問題`,stepStopLogging:`停止並提交報告`,stopAndSubmit:`停止並提交`,maxDuration:`{{minutes}} 分鐘後自動停止`,stoppingLogs:`正在收集日誌並提交...`,submitting:`正在提交錯誤報告...`,submittingStepConnection:`正在執行印表機連線檢查`,submittingStepVirtualPrinters:`正在執行虛擬印表機設定檢查`,submittingStepLogScan:`正在掃描最近的日誌以尋找已知問題`,submittingStepSubmit:`正在將報告提交至 GitHub`,submitSuccess:`錯誤報告提交成功！`,submitFailed:`提交錯誤報告失敗`,diagnosticChecking:`正在檢查印表機連線...`,diagnosticHealthy:`連線檢查通過 — 未在您的印表機上發現問題。`,diagnosticSummary:`{{total}} 台印表機中有 {{problems}} 台存在連線問題`,diagnosticIntro:`一台或多台印表機存在連線問題，可能正是您遇到問題的原因。請展開下方的印表機查看解決方法 — 解決它也許無需提交錯誤報告即可解決問題。您仍然可以在下方提交報告。`,thankYou:`謝謝！`,submitted:`您的錯誤報告已提交。`,viewIssue:`檢視 Issue`,closeKeepsRecording:`重現問題時可以關閉此面板——記錄會繼續進行，重新開啟後會回到這一步。`,resumeRecording:`錯誤報告記錄中 — {{elapsed}}。點擊以完成。`,resumeReport:`繼續報告`,unexpectedError:`發生了意外錯誤`},failureDetection:{title:`AI 故障檢測`,description:`透過自託管的 Obico ML API 監控列印,並對偵測到的故障自動採取行動。`,mlUrl:`Obico ML API 地址`,mlUrlHint:`您自託管的 Obico ml_api 容器的基礎 URL(例如 http://192.168.1.10:3333)。`,mlToken:`ML API 權杖（選填）`,mlTokenPlaceholder:`如果伺服器未設定 ML_API_TOKEN，請留空`,mlTokenHint:`必須與您的 Obico ml_api 容器的 ML_API_TOKEN 環境變數一致。如果容器未使用權杖，請留空。`,test:`測試`,testSuccess:`ML API 可存取且正常。`,testSuccessTokenUnknown:`ML API 可存取且正常。無法驗證權杖。`,testFailed:`無法存取 ML API。`,sensitivity:`靈敏度`,sensitivityLow:`低(減少誤報)`,sensitivityMedium:`中(平衡)`,sensitivityHigh:`高(更早檢測,更多誤報)`,sensitivityHint:`調整觸發警告和故障的置信度閾值。`,action:`偵測到故障時的操作`,actionNotify:`僅通知`,actionPause:`暫停列印`,actionPauseOff:`暫停並切斷電源`,pollInterval:`檢查間隔(秒)`,pollIntervalHint:`列印過程中每臺印表機的檢查頻率。最小 5 秒,最大 120 秒。`,externalUrlMissing:`尚未設定外部 URL。`,externalUrlHint:`ML API 透過 URL 擷取攝影機快照。請在一般設定中設定外部 URL，讓 ML API 容器可以連線到 Bambuddy。`,perPrinterTitle:`監控的印表機`,perPrinterHint:`選擇檢測服務要監視哪些印表機。`,monitorAll:`監控所有已連線的印表機`,statusTitle:`狀態`,serviceRunning:`服務執行中`,thresholds:`低 / 高閾值`,activePrinters:`活動列印`,noActivePrints:`目前沒有正在進行的列印。`,historyTitle:`最近檢測`,noHistory:`尚無檢測紀錄。`},makerworld:{title:`MakerWorld`,description:`貼上 MakerWorld 模型連結，即可直接在 Bambuddy 中匯入並列印 —— 無需切換至 Bambu Handy 應用程式。`,pasteUrlHeader:`從 MakerWorld 匯入`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… 或貼上任意 MakerWorld 連結`,resolveButton:`解析`,signInRequiredTitle:`下載需要登入 Bambu Cloud`,signInRequiredBody:`您可以匿名瀏覽模型詳情，但下載 3MF 檔案需要 Bambu Cloud 帳戶。`,signInExpiredTitle:`Bambu Cloud 登入已過期`,signInExpiredBody:`您仍處於 Bambuddy 的登入狀態，但 Bambu Lab 已不再接受已儲存的權杖，因此下載會失敗。請重新登入 Bambu Cloud。`,openCloudSettings:`開啟雲端設定`,untitledModel:`無標題模型`,byCreator:`作者: {{name}}`,downloadsCount:`{{count}} 次下載`,licensePrefix:`授權條款`,alreadyImported:`已在資料庫中`,openOnMakerworld:`在 MakerWorld 中開啟`,alreadyInLibrary:`此模型已在您的資料庫中 —— 可在檔案管理員 → MakerWorld 中找到`,importSuccess:`已匯入 {{filename}} —— 已儲存至檔案管理員 → MakerWorld`,platesHeader:`列印板 ({{count}})`,plateDefaultName:`列印板 {{n}}`,materialCount:`{{count}} 種耗材`,amsRequired:`需要 AMS`,slicedFor:`為 {{printer}} 切片`,alsoCompatible:`還標記為相容：{{printers}}`,importToLibrary:`儲存`,sliceIn:`儲存並在 {{slicer}} 中切片`,disclaimer:`MakerWorld 整合使用由社群記錄的 API 介面。Bambuddy 與 MakerWorld 或 Bambu Lab 無從屬或認可關係。`,lastImportSuccess:`已匯入您的資料庫`,lastImportAlreadyInLibrary:`已存在於您的資料庫中`,viewInLibrary:`在檔案管理員中查看`,openInBambuStudio:`在 Bambu Studio 中開啟`,openInOrcaSlicer:`在 OrcaSlicer 中開啟`,importTo:`匯入至檔案管理員`,recentImportsHeader:`最近匯入`,phaseResolving:`解析中`,phaseDownloading:`下載中`,folderAuto:`MakerWorld (預設)`,importAll:`全部匯入`,importAllProgress:`正在匯入 {{current}}/{{total}}`,openGallery:`開啟圖片庫`,galleryPrev:`上一張`,galleryNext:`下一張`,deleteImport:`從資料庫中移除`,importDeleting:`正在移除…`,importDeleted:`已從資料庫中移除`,confirmDelete:`從資料庫中移除 {{filename}}？本機檔案將被刪除，但可以從 MakerWorld 重新匯入。`,errors:{resolveFailed:`無法解析該 MakerWorld 連結。`,downloadFailed:`下載失敗。請重試。`,deleteFailed:`無法從資料庫中移除檔案。`}},gcodeViewer:{filamentSlot:`耗材 {{n}}`,loading:`正在讀取走刀路徑…`,loadFailed:`無法載入此檔案的 G-code。`,showTravel:`空跑移動`,topLayer:`頂層`,bottomLayer:`底層`,noSource:`未指定要預覽的檔案。`,view:{filament:`耗材`,feature:`類型`,height:`高度`,width:`寬度`},feature:{wall:`牆體`,sparseInfill:`稀疏填充`,solidInfill:`實心填充`,bridge:`橋接 / 懸垂`,support:`支撐`,skirt:`裙邊 / 邊緣`,gapFill:`間隙填充`,ironing:`熨燙`,primeTower:`擦料塔`},back:`返回`,backToArchives:`返回列印歸檔`,backToFiles:`返回檔案管理器`,plates:`板`,plateN:`板 {{n}}`},libraryTrash:{title:`資源回收筒`,headerButton:`資源回收筒`,headerTooltip:`檢視已移至資源回收筒的檔案`,backToFiles:`返回檔案管理員`,subtitleAdmin:`已刪除的檔案會在資源回收筒保留 {{days}} 天，之後自動刪除。此檢視顯示所有使用者的資源回收筒。`,subtitleUser:`已刪除的檔案會在資源回收筒保留 {{days}} 天，之後自動刪除。`,loading:`正在載入資源回收筒…`,loadError:`無法載入資源回收筒。`,empty:`資源回收筒是空的。`,summary:`{{count}} 個檔案 · {{size}}`,emptyTrash:`清空資源回收筒`,restore:`還原`,purgeNow:`立即刪除`,autoPurgeIn:`將於 {{when}} 自動刪除`,days:`天`,retentionLabel:`自動刪除時間`,selectAll:`全選`,selectOne:`選擇 {{filename}}`,selectionCount:`已選擇 {{count}} 項`,bulkRestore:`還原所選`,bulkPurge:`刪除所選`,col:{filename:`檔案`,folder:`資料夾`,size:`大小`,deleted:`移入資源回收筒`,autoPurge:`自動刪除`,owner:`擁有者`,actions:`操作`},confirm:{purgeTitle:`永久刪除？`,purgeBody:`{{filename}} 將從磁碟中刪除，無法還原。`,emptyTitle:`清空資源回收筒？`,emptyBody:`全部 {{count}} 個檔案將從磁碟中刪除。此操作無法復原。`,bulkPurgeTitle:`永久刪除所選檔案？`,bulkPurgeBody:`所選的 {{count}} 個檔案將從磁碟中刪除，無法還原。`,cta:`永久刪除`},toast:{restored:`檔案已還原。`,restoreFailed:`無法還原檔案。`,purged:`檔案已永久刪除。`,purgeFailed:`無法刪除檔案。`,emptied:`已從資源回收筒刪除 {{count}} 個檔案。`,emptyFailed:`無法清空資源回收筒。`,retentionSaved:`自動刪除已設定為 {{days}} 天。`,retentionFailed:`無法儲存保留設定。`,bulkRestored:`已還原 {{count}} 個檔案。`,bulkPurged:`已刪除 {{count}} 個檔案。`}},libraryPurge:{title:`清理舊檔案`,headerButton:`清理舊檔案`,headerTooltip:`批次將舊檔案移至資源回收筒`,description:`早於所選時間的檔案將被移至資源回收筒。外部資料夾會被略過。在自動刪除之前，您可以從資源回收筒還原檔案。`,ageLabel:`移動早於以下天數的檔案`,days:`天`,includeNeverPrinted:`包括從未列印過的檔案`,effectsTitle:`點擊清除時會發生什麼`,effect1:`符合的檔案移至回收筒 — 尚未從磁碟刪除。`,effect2:`在保留期到期之前，您可以隨時從回收筒復原。`,effect3:`保留期滿後，回收筒清理器將它們從磁碟永久刪除。`,effect4:`外部（連結）資料夾中的檔案將被略過 — Bambuddy 從不刪除不屬於自己的位元組。`,previewLoading:`正在檢查符合的檔案數量…`,previewFailed:`無法預覽清理結果。`,previewSummary:`{{count}} 個檔案 · {{size}} 將被移至資源回收筒`,andMore:`…還有 {{count}} 個`,warning:`檔案將被軟刪除——在保留期結束前，您可以從資源回收筒還原它們。`,confirmCta:`將 {{count}} 個移至資源回收筒`,purging:`正在移至資源回收筒…`,toast:{success:`已將 {{count}} 個檔案移至資源回收筒。`,failed:`無法清理檔案。`}},libraryAutoPurge:{enableLabel:`自動清理舊檔案`,enableDescription:`每天執行一次管理員清理。檔案會先進入資源回收筒——不會立即刪除。`,ageLabel:`自動清理早於以下天數的檔案`,ageDescription:`最少 7 天，最多 10 年。使用與手動「清理舊檔案」按鈕相同的時間規則。`,days:`天`,includeNeverPrinted:`包括從未列印過的檔案`,saveFailed:`無法儲存自動清理設定。`},archivePurge:{headerButton:`清除舊條目`,headerTooltip:`批次刪除舊歸檔`,title:`清除舊歸檔`,description:`清除舊的列印歷史。每個歸檔按其最近一次列印完成時間老化 — 重新列印歸檔會重新整理其年齡，因此活躍工作永遠不會被清除。`,ageLabel:`刪除最近未列印的歸檔：`,days:`天`,effectsTitle:`點擊清除時會發生什麼`,effect1:`每個符合的歸檔將從清單中隱藏，其磁碟檔案（3MF、縮圖、縮時攝影、原始 3MF、F3D、照片）也會被刪除。`,effect2:`資料庫中的歸檔記錄會保留，因此 Quick Stats 仍可計入耗材、時間、成本與能耗的貢獻 — 與單筆刪除的預設行為一致。`,effect3:`勾選下方「同時從統計中移除」，可一併清除 Quick Stats 中的貢獻（等同單筆刪除選項）。此操作無法復原。`,effect4:`重新列印歸檔會重新整理其使用計時器，因此仍在使用的歸檔不會被清除。`,purgeStatsLabel:`同時從統計中移除`,purgeStatsHint:`從 Quick Stats（耗材、時間、成本、能耗）中移除符合的歸檔。未勾選時，Quick Stats 會保留所有貢獻，僅檔案從磁碟刪除。`,previewLoading:`檢查符合的歸檔數量…`,previewFailed:`無法預覽清除。`,previewSummary:`將移除 {{count}} 個歸檔 · {{size}}`,andMore:`…還有 {{count}} 個`,warning:`檔案會從磁碟刪除且無法復原。繼續前請下載或收藏您想保留的內容。`,confirmCta:`移除 {{count}} 個歸檔`,purging:`移除中…`,toast:{success:`已移除 {{count}} 個歸檔。`,failed:`無法清除歸檔。`}},archiveAutoPurge:{enableLabel:`自動清除舊歸檔`,enableDescription:`每天一次，將閾值內未列印的歸檔從清單中隱藏，並從磁碟中刪除其檔案。重新列印會重設計時器。`,ageLabel:`自動刪除最近未列印的歸檔：`,ageDescription:`最少 7 天，最多 10 年。基於最近一次列印完成 — 重新列印會重新整理年齡。刪除 3MF、縮圖、縮時攝影、原始 3MF、F3D 與照片。`,days:`天`,purgeStatsLabel:`同時從統計中移除`,purgeStatsDescription:`啟用後，每日清理任務還會將每個被清除的歸檔從 Quick Stats（耗材、時間、成本、能耗）中移除。預設關閉 — Quick Stats 會保留貢獻，僅檔案從磁碟刪除。`,runNow:`立即清除歸檔`,saveFailed:`無法儲存自動清除設定。`},cameraTokens:{scope:{camera_stream:`攝影機串流`,camwall:`攝影機牆`,overlay:`直播疊加層`},title:`攝影機 API 權杖`,navTitle:`攝影機 API 權杖`,description:`長期權杖，用於將攝影機串流嵌入 Home Assistant、Frigate、自助展示螢幕或其他需要穩定網址的工具。權限範圍在建立時選擇，權杖可隨時撤銷。`,loading:`載入中…`,confirmRevoke:{title:`撤銷此權杖？`,body:`使用「{{name}}」的任何裝置將立即失去存取權限。此操作無法復原。`,cancel:`取消`,confirm:`撤銷`},create:{scopeLabel:`權限範圍`,hintCameraStream:`攝影機串流權杖只能取得攝影機串流與快照。適用於 Home Assistant、Frigate 或任何嵌入單一攝影機的情境。`,hintCamWall:`攝影機牆權杖可在無須登入的螢幕上開啟 /camwall，能看到每台印表機的名稱與狀態以及攝影機串流，但看不到檔案名稱、位址或存取碼。`,hintOverlay:`直播疊加層權杖可在無須登入的螢幕上開啟 /overlay/{printerId}——供 OBS 或任何直播使用。它能看到一台印表機的攝影機串流以及即時列印狀態，包括螢幕上顯示的檔案名稱，但看不到位址或存取碼。`,title:`建立新權杖`,nameLabel:`權杖名稱`,namePlaceholder:`例如 Home Assistant`,daysLabel:`到期天數`,submit:`建立`,hint:`最大有效期 365 天。權杖值僅在建立時顯示一次 — 請立即複製。`},created:{camWallUrlTitle:`此螢幕的攝影機牆網址`,camWallUrlHint:`在螢幕上開啟此網址。任何能看到該網址的人都能觀看攝影機牆，請像對待鑰匙一樣對待它——撤銷權杖即可切斷該螢幕的存取。`,overlayUrlTitle:`用於 OBS 的疊加層網址`,overlayUrlHint:`在 OBS 中將其新增為「瀏覽器」來源（Browser Source）。將 /overlay/1 中的數字改為您印表機的編號（可在「印表機」頁面的網址中查看）。任何能看到該網址的人都能觀看直播，請像對待鑰匙一樣對待它——撤銷權杖即可切斷存取。`,title:`權杖已建立 — 立即複製`,warning:`這是此權杖唯一一次可見。關閉此對話框後您將無法再次查看。`,copy:`複製`,dismiss:`我已儲存`},list:{scope:`權限範圍`,myTitle:`我的權杖`,allTitle:`所有使用者（管理員視圖）`,empty:`尚無權杖。`,name:`名稱`,owner:`擁有者`,prefix:`前綴`,created:`建立時間`,expires:`到期時間`,lastUsed:`最近使用`,revoke:`撤銷`,expired:`已過期`},toast:{created:`權杖已建立`,createFailed:`建立權杖失敗`,revoked:`權杖已撤銷`,revokeFailed:`撤銷權杖失敗`,loadFailed:`載入權杖失敗`,copied:`已複製到剪貼簿`,copyFailed:`複製失敗 — 手動選擇並複製`}},forecast:{title:`庫存預測`,noSpools:`未找到活躍的料卷。請將料卷新增至庫存以查看預測資料。`,noUsageData:`無可用使用資料 — 無法預測庫存時間線。`,sku:`SKU`,material:`材料`,stock:`庫存`,dailyRate:`消耗率`,daysLeft:`剩餘天數`,emptyBy:`耗盡日期`,reorderBy:`補貨截止日`,actions:`操作`,trend:`趨勢`,estimated:`估算`,noData:`無資料`,timeframe:`時間範圍`,chartTitle:`庫存預測 — 前5種材料`,dashedLinesROP:`虛線 = 再訂貨點`,stockLevel:`庫存量`,reorderPoint:`再訂購點`,safetyMargin:`安全餘量`,trendLegend:`趨勢（基於歷史，95%服務水準）`,estimatedLegend:`估算（重量差值）`,noDataLegend:`無資料`,ropLabel:`再訂貨點`,ssLabel:`安全庫存`,safetyStockLegend:`安全庫存`,stockArrivalLegend:`到貨`,stockoutLegend:`斷貨`,alertCount_one:`{{count}}條警告`,alertCount_other:`{{count}}條警告`,order:`訂購`,globalLeadTime:`全域交貨期`,globalLeadTimeHint:`全域交貨期下限 — 用於所有 SKU 的再訂購點計算`,save:`儲存`,cancel:`取消`,settingsSaved:`設定已儲存`,failedSaveSettings:`儲存設定失敗`,globalLeadTimeSaved:`全域提前期已儲存`,skuLeadTimeOverride:`SKU 交貨期覆蓋`,skuLeadTimeHint:`0 = 使用全域交貨期。設定 >0 以覆蓋此 SKU。`,safetyMarginLabel:`安全餘量`,effectiveLeadTime:`有效交貨期`,effectiveLeadTimeHint:`max(全域 {{global}}天, SKU {{sku}}天)`,reorderPointHint:`d̄ × LT + safety margin — 當庫存降至此水準時下單`,safetyMarginHint:`統計安全庫存 (z=1.65 × σ × √LT) + 使用者自訂緩衝`,safetyMarginHintDays:`在統計安全庫存基礎上額外增加的緩衝。{{approx}}`,safetyMarginHintDaysApprox:` ≈ 按當前速率 {{g}}g。`,safetyMarginHintG:`在統計安全庫存基礎上增加的固定重量緩衝。{{approx}}`,safetyMarginHintGApprox:` ≈ 按當前速率 {{days}}天。`,individualSpools:`單個料卷`,labelWeight:`標示重量`,spoolCount_one:`{{count}}個線軸`,spoolCount_other:`{{count}}個線軸`,stockBreakRisk:`斷貨風險`,stockBreakBefore:`補貨前庫存斷檔`,stockBreakDetail:`剩餘 {{days}} 天，交貨期 {{lt}} 天。`,reorderNow:`立即補貨`,reorderTriggerPassed:`觸發日期 {{date}} 已過。`,shoppingList:`購物清單`,shoppingListItems_one:`（{{count}}項）`,shoppingListItems_other:`（{{count}}項）`,shoppingListEmpty:`購物清單為空。點擊任意列的購物車圖示以新增商品。`,addToCart:`新增至購物清單`,alertsSnoozed:`靜音此SKU的提醒`,alertsEnabled:`啟用此SKU的提醒`,addedToCart:`已新增至購物清單`,failedAddItem:`新增項目失敗`,listView:`列表`,logisticsView:`物流`,qty:`數量`,weight:`重量`,leadTime:`交貨期`,expectedRestock:`預計補貨日期`,status:`狀態`,note:`備註`,pending:`待處理`,purchased:`已購買`,received:`已收貨`,markPurchased:`標記為已購買`,markReceived:`標記為已收貨 — 將料卷新增至庫存`,resetToPending:`重置為待處理`,remove:`移除`,clearAll:`清空`,downloadCsv:`CSV`,addToCartTitle:`新增至購物清單`,byQuantity:`依數量`,byDuration:`依時長`,numberOfSpools:`線軸數量`,lastHowManyDays:`需要持續多少天？`,noUsageQty:`無使用資料 — 數量已設為1。`,noteOptional:`備註（選填）`,notePlaceholder:`例如：用於專案X，緊急…`,addNSpools_one:`新增{{count}}個線軸`,addNSpools_other:`新增{{count}}個線軸`,onArrival:`到貨時`,stockBreakIn:`{{days}} 天後斷貨。`,stockRunsOutBefore:`庫存在 {{lt}} 天交貨期結束前耗盡。`,atRate:`按 {{rate}}g/天的速度，您需要`,moreSpools_one:`再{{count}}個線軸`,moreSpools_other:`再{{count}}個線軸`,bridgeGap:`來彌補缺口。`,noReadAccess:`您沒有查看庫存預測的權限。`,noWriteAccess:`您沒有修改預測設定的權限。`}}},sv:{translation:{nav:{printers:`Skrivare`,archives:`Arkiv`,queue:`Utskriftskö`,stats:`Statistik`,profiles:`Profiler`,maintenance:`Underhåll`,projects:`Projekt`,finance:`Finanser`,inventory:`Filament`,files:`Filhanterare`,makerworld:`MakerWorld`,notifications:`Notiser`,settings:`Inställningar`,system:`System`,collapseSidebar:`Minimera sidofältet`,expandSidebar:`Maximera sidofältet`,update:`Uppdatera`,updateAvailable:`Uppdatering tillgänglig: v{{version}}`,updateAvailableBanner:`Version {{version}} är tillgänglig!`,viewUpdate:`Visa uppdatering`,viewOnGithub:`Visa på GitHub`,keyboardShortcuts:`Tangentbordsgenvägar (?)`,switchToLight:`Växla till ljust läge`,switchToDark:`Växla till mörkt läge`,switchToSystem:`Växla till systemläge`,smartSwitches:`Smarta strömbrytare`,logout:`Logga ut`,installApp:`Installera app`,installAppSuccess:`Bambuddy installerades`},common:{plusNMore:`+{{count}} till`,save:`Spara`,saving:`Sparar...`,cancel:`Avbryt`,delete:`Ta bort`,edit:`Redigera`,add:`Lägg till`,close:`Stäng`,confirm:`Bekräfta`,loading:`Laddar...`,error:`Fel`,errorLoading:`Fel vid inläsning av data`,retry:`Försök igen`,success:`Lyckades`,warning:`Varning`,enabled:`Aktiverad`,disabled:`Inaktiverad`,yes:`Ja`,no:`Nej`,on:`På`,off:`Av`,all:`Alla`,none:`Inga`,search:`Sök`,filter:`Filtrera`,sort:`Sortera`,refresh:`Uppdatera`,download:`Ladda ner`,upload:`Ladda upp`,uploading:`Laddar upp...`,uploadFailed:`Uppladdning misslyckades`,actions:`Åtgärder`,status:`Status`,name:`Namn`,user:`Användare`,description:`Beskrivning`,date:`Datum`,time:`Tid`,hours:`timmar`,minutes:`minuter`,seconds:`sekunder`,days:`dagar`,enable:`Aktivera`,disable:`Inaktivera`,permissions:`Behörigheter`,noPrinters:`Inga skrivare konfigurerade`,noData:`Ingen data tillgänglig`,linkNotFound:`Länk hittades ej`,required:`Obligatorisk`,optional:`Valfri`,dismiss:`Avfärda`,apply:`Tillämpa`,reset:`Återställ`,export:`Exportera`,import:`Importera`,clear:`Rensa`,selectAll:`Markera alla`,deselectAll:`Avmarkera alla`,noChange:`— Ingen ändring —`,unchanged:`Oförändrad`,unassigned:`Otilldelad`,unknown:`Okänd`,unknownError:`Okänt fel`,today:`Idag`,tomorrow:`Imorgon`,asap:`Så snart som möjligt`,overdue:`Försenad`,now:`Nu`,collapse:`Minimera`,expand:`Maximera`,previous:`Föregående`,next:`Nästa`,viewArchive:`Visa arkiv`,viewInFileManager:`Visa i filhanterare`,addedBy:`Tillagd av {{username}}`,prints:`utskrifter`,more:`+{{count}} till`,ascending:`Stigande`,descending:`Sjunkande`,back:`Tillbaka`,copy:`Kopiera`,copied:`Kopierad!`,printer:`Skrivare`,remove:`Ta bort`,type:`Typ`,print:`Skriv ut`,rename:`Döp om`,move:`Flytta`,create:`Skapa`,duplicate:`Duplicera`,left:`Vänster`,right:`Höger`,run:`Kör`,running:`Kör...`},finance:{allTypes:`Alla typer`,allCostCenters:`Alla kostnadsställen`,title:`Finanser`,subtitle:`Plånbok, personliga transaktioner och kostnadsställen`,noAccess:`Du har inte behörighet att visa finansiella data.`,personalView:`Personlig vy`,adminView:`Adminvy`,createCostCenter:`Skapa kostnadsställe`,adjustWallet:`Justera plånbok`,addManualPrint:`Lägg till manuell utskrift`,manageMembers:`Hantera medlemmar i kostnadsställe`,currentBalance:`Aktuellt saldo`,transactions:`Transaktioner`,personalTransactions:`Personliga transaktioner`,costCenters:`Kostnadsställen`,availableForPrinting:`Tillgängligt för utskrifter`,costCenterName:`Namn`,budgetType:`Budgettyp`,monthlyBudget:`Månadsbudget`,totalBudget:`Total budget`,noBudget:`Ingen budget`,create:`Skapa`,selectUser:`Välj användare`,transactionType:`Typ`,amount:`Belopp`,noCostCenter:`Inget kostnadsställe`,descriptionOptional:`Beskrivning (valfritt)`,applyAdjustment:`Tillämpa justering`,memberCanPrint:`Medlem kan skriva ut`,addMember:`Lägg till medlem`,canPrint:`Kan skriva ut`,noMembers:`Inga medlemmar tilldelade.`,editCostCenter:`Redigera kostnadsställe`,myCostCenters:`Mina kostnadsställen`,costCentersHint:`Granska budgetgränser och håll kostnaderna under kontroll`,noCostCenters:`Inga kostnadsställen hittade.`,owner:`Ägare`,balance:`Kontosaldo`,unlimited:`Obegränsad`,budgetPolicyHint:`Kontosaldon håller reda på kostnader. Utskrift är begränsat endast av det valda kostnadsställets budget; utan budget är utskriften obgränsad.`,budget:`Budget`,shared:`Delad`,cannotEditPrivateCostCenter:`Privat kostnadsställe kan inte redigeras här`,recentTransactions:`Senaste transaktioner`,transactionsHint:`Filtrera efter typ och kostnadsställe`,first:`Första`,prev:`Föregående`,next:`Nästa`,last:`Sista`,pageNumberOf:`Sida {{page}} av {{total}}`,noTransactions:`Inga transaktioner tillgängliga.`,noTransactionsForFilter:`Inga transaktioner matchar de valda filtren.`,costCenter:`Kostnadsställe`,balanceAfter:`Saldo efter`,userWithId:`Användare #{{id}}`,partial:`Delvis`,editTransaction:`Redigera transaktion`,selectCostCenter:`Välj kostnadsställe...`,costCenterRequired:`Vänligen välj ett kostnadsställe`,amountExample:`t.ex., 4,00`,manualAdjustmentExample:`t.ex., manuell justering`,userRequired:`Välj en användare`,amountInvalid:`Beloppet måste vara ett giltigt nummer`,createdCostCenter:`Kostnadsställe skapat`,createCostCenterFailed:`Kunde inte skapa kostnadsställe`,transactionDeleted:`Transaktion borttagen`,deleteTransactionFailed:`Kunde inte ta bort transaktion`,transactionEdited:`Transaktion uppdaterad och bokföring omberäknad`,editTransactionFailed:`Kunde inte redigera transaktion`,manualPrintCreated:`Manuell utskriftsavgift tillagd och bokföring omberäknad`,manualPrintFailed:`Kunde inte skapa manuell utskrift`,memberSaved:`Medlem sparad`,memberSaveFailed:`Kunde inte spara medlem`,memberRemoved:`Medlem borttagen`,memberRemoveFailed:`Kunde inte ta bort medlem`,costCenterNameRequired:`Namn på kostnadsställe krävs`,costCenterUpdated:`Kostnadsställe uppdaterat`,costCenterUpdateFailed:`Kunde inte uppdatera kostnadsställe`,confirmDeleteCostCenter:`Ta bort kostnadsställe "{{name}}"?`,costCenterDeleted:`Kostnadsställe borttaget`,costCenterDeleteFailed:`Kunde inte ta bort kostnadsställe`,deleteTransactionConfirm:`Ta bort denna transaktion? Saldon kommer att omberäknas automatiskt.`,deposit:`Insättning`,withdraw:`Uttag`,printCharge:`Utskriftsavgift`,deleteTransaction:`Ta bort transaktion`},printers:{title:`Skrivare`,addPrinter:`Lägg till skrivare`,addPreflight:{checking:`Kontrollerar anslutning...`,warning:`Vissa anslutningskontroller misslyckades. Denna skrivare kan visas som offline. Granska kontrollerna nedan, åtgärda vad du kan, eller spara ändå.`,back:`Tillbaka`,saveAnyway:`Spara ändå`},editPrinter:`Redigera skrivare`,deletePrinter:`Ta bort skrivare`,printerName:`Skrivarnamn`,serialNumber:`Serienummer`,ipAddress:`IP-adress / värdnamn`,accessCode:`Åtkomstkod`,model:`Modell`,nozzleCount:`Antal munstycken`,autoArchive:`Autoarkivera`,status:{available:`Tillgänglig`,idle:`Inaktiv`,printing:`Skriver ut`,paused:`Pausad`,offline:`Offline`,problem:`Problem`,error:`Fel`,finished:`Färdig`,unknown:`Okänd`},temperatures:{nozzle:`Munstycke`,bed:`Byggplatta`,chamber:`Kammare`},heaterHistory:{title:`Värmehistorik`,openLabel:`Visa värmehistorik`,nozzle:`Munstycke`,nozzle2:`Munstycke 2`,bed:`Byggplatta`,chamber:`Kammare`,error:`Kunde inte ladda historik`,empty:`Ingen data inspelad än`},progress:`{{percent}}% klar`,timeRemaining:`{{time}} kvar`,deleteConfirm:`Är du säker på att du vill ta bort "{{name}}"?`,maintenanceOk:`Underhåll OK`,maintenanceWarning:`{{count}} varning`,maintenanceWarning_plural:`{{count}} varningar`,maintenanceDue:`{{count}} utebliven`,maintenanceDue_plural:`{{count}} uteblivna`,sort:{name:`Namn`,status:`Status`,model:`Modell`,location:`Plats`,eta:`Beräknad tid`,ascending:`Sortera stigande`,descending:`Sortera fallande`},cardSize:{small:`Små kort`,medium:`Mellanstora kort`,large:`Stora kort`,extraLarge:`Extra stora kort`},pageView:{openCamWallPage:`Öppna kameravägg som sida`,cards:`Kort`,camWall:`Kameravägg`},camWall:{page:{tokenRejected:`Denna länk till kameraväggen är inte längre giltig. Token kan ha löpt ut eller återkallats.`,loadFailed:`Kunde inte ladda skrivarna.`},noPrinters:`Inga skrivare att visa`,noSignal:`Ingen signal`,live:`Live`,snap:`Ögonblicksbild`,off:`Av`,summary:`{{live}} live, {{snap}} ögonblicksbilder, {{total}} totalt`,layer:`Skikt {{cur}}/{{total}}`,timeLeft:`{{time}} kvar`,statusMode:{off:`Av`,compact:`Kompakt`,full:`Fullständig`},settings:{title:`Inställningar för kameravägg`,maxLive:`Max antal live-sändningar`,maxLiveHint:`Hur många rutor som sänds live samtidigt. Övriga uppdateras som ögonblicksbilder.`,snapshotInterval:`Intervall för ögonblicksbilder (sekunder)`,snapshotIntervalHint:`Hur ofta icke-live-rutor hämtar en ny ögonblicksbild.`,statusOverlay:`Statusöverlägg`,statusOverlayHint:`Kompakt: Endast statusmärke. Fullständig: + framsteg, skikt, tid kvar.`}},hideOffline:`Dölj offline`,nextAvailable:`Nästa tillgängliga`,powerOn:`Sätt på`,offlinePrintersWithPlugs:`Offline-skrivare med smarta kontakter`,noPrintersConfigured:`Inga skrivare konfigurerade än`,search:`Sök skrivare...`,noSearchResults:`Inga skrivare matchar din sökning eller filter`,filter:{allStatuses:`Alla statusar`,allLocations:`Alla platser`},toolbar:{filters:`Filter`,view:`Vy`,actions:`Åtgärder`},readyToPrint:`Redo att skriva ut`,external:`Extern`,extL:`Ext-V`,extR:`Ext-H`,deleteArchives:`Ta bort utskriftsarkiv`,noLabel:`Ingen etikett`,printPreview:`Förhandsgranskning av utskrift`,width:`Bredd`,height:`Höjd`,noObjectsFound:`Inga objekt hittade`,objectsLoadedOnPrintStart:`Objekt laddas när en utskrift startar`,willBeSkipped:`Kommer att hoppas över`,name:`Namn`,serialCannotBeChanged:`Serienummer kan inte ändras`,locationHelp:`Används för att gruppera skrivare och filtrera köuppgifter`,wifiSignal:{veryWeak:`Mycket svag`,weak:`Svag`,fair:`Medel`,good:`Bra`,excellent:`Utmärkt`},maintenanceUpToDate:`Allt underhåll är uppdaterat - Klicka för att se`,maintenance:{title:`I underhållsläge`,subtitle:`Denna skrivare är pausad — ej ansluten, ej berättigad för kö, skickar inga notiser.`,pillLabel:`Underhåll`,exitButton:`Avsluta underhåll`,menuEnter:`Aktivera underhållsläge`,menuExit:`Avsluta underhållsläge`,toastEntered:`{{name}} är nu i underhållsläge`,toastExited:`{{name}} är tillbaka online`,confirmMidPrintTitle:`Aktivera underhållsläge under utskrift?`,confirmMidPrintMessage:`{{name}} skriver för närvarande ut. Om du aktiverar underhållsläge kommer MQTT att kopplas från och framstegsspårning samt färdighetsnotiser för detta jobb kommer att stoppas. Fortsätta?`,editFieldLabel:`Underhållsläge`,editFieldHelp:`När det är på, är denna skrivare pausad från MQTT, köutskick och notiser — användbart för reparation, parallella Bambuddy-installationer eller tillfällig paus.`},chamberLightOn:`Sätt på kammarljus`,chamberLightOff:`Stäng av kammarljus`,files:`Filer`,browseFiles:`Bläddra bland skrivarens filer`,autoOffAfterPrint:`Automatisk avstängning efter utskrift`,autoOffExecuted:`Auto-avstängning utfördes – sätt på skrivaren för att återställa`,hmsErrors:`HMS-fel`,viewHmsErrors:`Visa {{count}} HMS-fel`,resume:`Fortsätt`,pause:`Pausa`,stop:`Stoppa`,camera:`Kamera`,skipObject:`Hoppa över objekt`,reconnect:`Återanslut`,forceRefresh:`Tvinga uppdatering`,forceRefreshSuccess:`Uppdatering begärd`,mqttDebug:`MQTT-felsökning`,printerInformation:`Skrivarinformation`,copyToClipboard:`Kopiera`,copied:`Kopierad!`,state:`Status`,wifiSignalLabel:`WiFi-signal`,developerMode:`Utvecklarläge`,enabled:`Aktiverad`,disabled:`Inaktiverad`,addedOn:`Tillagd`,sdCard:`SD-kort`,inserted:`Insatt`,notInserted:`Ej insatt`,totalPrintHours:`Utskriftstimmar`,activeNozzle:`Aktiv: {{nozzle}} munstycke`,amsSwitchInletTooltip:`Filamentspårväxlare IN-{{inlet}} ({{side}}) — matar båda munstyckena`,nozzleRack:`Munstyckesställ`,nozzleDocked:`Parkerad`,nozzleMounted:`Monterad`,nozzleActive:`Aktiv`,nozzleIdle:`Inaktiv`,nozzleDiameter:`Diameter`,nozzleType:`Typ`,nozzleStatus:`Status`,nozzleFilament:`Filament`,nozzleWear:`Slitage`,nozzleMaxTemp:`Max temp`,nozzleSerial:`Serienummer`,nozzleHardenedSteel:`Härdat stål`,nozzleStainlessSteel:`Rostfritt stål`,nozzleTungstenCarbide:`Volframkarbid`,nozzleFlow:`Flöde`,nozzleHighFlow:`Högt flöde`,nozzleStandardFlow:`Standard`,firmwareUpdate:`Firmwareuppdatering`,firmwareInstructions:`På skrivarens pekskärm, gå till`,firmwareNav:`Navigera till`,settings:`Inställningar`,firmware:`Firmware`,discoverPrinters:`Hitta skrivare`,searching:`Söker...`,manualEntry:`Manuell inmatning`,addFromCloud:`Lägg till från molnet`,toast:{printerDeleted:`Skrivare borttagen`,missingSpoolAssignment:`Utskrift startade på {{printer}}. Saknas spool-tilldelning för: {{slots}}`,killSwitchTriggered:`Fjärrlås för fakturering stoppade en obehörig utskrift på {{printer}}: {{filename}}`,billingChargeFailed:`Fakturering misslyckades för {{filename}} på {{printer}}. Budgetreservationen bibehölls; kontrollera serverloggarna.`,assignmentVerified:`Filament laddat i fack {{slot}} ({{printer}})`,assignmentVerifiedNoKprofile:`Fack {{slot}} på {{printer}} laddat, men flödeskalibrering (K-profil) tillämpades inte`,assignmentNotConfirmed:`Kunde inte bekräfta tilldelningen för fack {{slot}} på {{printer}} — kontrollera AMS-facket`,printerAdded:`Skrivare tillagd`,printerUpdated:`Skrivare uppdaterad`,failedToDelete:`Kunde inte ta bort skrivare`,failedToAdd:`Kunde inte lägga till skrivare`,connectionFailedNotAdded:`Kunde inte ansluta till skrivaren. Verifiera IP, serienummer och åtkomstkod, och bekräfta att LAN-läge är aktiverat. Skrivaren lades inte till.`,failedToUpdate:`Kunde inte uppdatera skrivare`,commandSent:`Kommando skickat`,failedToSendCommand:`Kunde inte skicka kommando`,turnedOn:`{{name}} slogs på`,failedToPowerOn:`Kunde inte sätta på {{name}}`,scriptTriggered:`Skript utlöst`,printStopped:`Utskrift stoppad`,printPaused:`Utskrift pausad`,printResumed:`Utskrift återupptagen`,referenceDeleted:`Referens borttagen`,detectionAreaSaved:`Detekteringsområde sparat`,failedToRunScript:`Kunde inte köra skript`,failedToStopPrint:`Kunde inte stoppa utskrift`,failedToPausePrint:`Kunde inte pausa utskrift`,failedToResumePrint:`Kunde inte återuppta utskrift`,failedToControlChamberLight:`Kunde inte kontrollera kammarljus`,failedToSetSpeed:`Kunde inte ställa in utskriftshastighet`,failedToUpdateSetting:`Kunde inte uppdatera inställning`,failedToSkipObjects:`Kunde inte hoppa över objekt`,failedToRereadRfid:`Kunde inte läsa om RFID`,failedToCheckPlate:`Kunde inte kontrollera platta`,failedToUpdateLabel:`Kunde inte uppdatera etikett`,failedToDeleteReference:`Kunde inte ta bort referens`,failedToSaveDetectionArea:`Kunde inte spara detekteringsområde`,plateCheckEnabled:`Plattkontroll aktiverad`,plateCheckDisabled:`Plattkontroll inaktiverad`,calibrationSaved:`Kalibrering sparad!`,calibrationFailed:`Kalibrering misslyckades`,rfidRereadInitiated:`Omstart av RFID-läsning påbörjad`,loadInitiated:`Laddar filament…`,unloadInitiated:`Laddar ur filament…`,failedToLoad:`Kunde inte ladda filament`,failedToUnload:`Kunde inte ladda ur filament`},connection:{connected:`Ansluten`,offline:`Offline`},plateStatus:{markCleared:`Markera platta som tömd`,cleared:`Platta tömd`,notCleared:`Platta ej tömd`,inUse:`Platta i användning`},queue:{inQueue:`{{count}} utskrift i kö`,inQueue_plural:`{{count}} utskrifter i kö`},controls:`Kontroller`,rfid:{reread:`Läs om RFID`},ams:{load:`Ladda`,unload:`Ladda ur`,feedTitle:`Ladda {{slot}} till vilket munstycke?`,feedPrompt:`Filamentspårväxlaren kan dirigera detta fack till endera värmeblock. Välj vilken du vill mata.`,feedLeft:`Vänster munstycke`,feedRight:`Höger munstycke`,feedAlreadyLoaded:`Redan laddad`,switchNotReady:`Filamentspårväxlaren är inte konfigurerad ännu. Tilldela varje AMS till ett inlopp på skrivaren och försök sedan igen.`},bedJog:{limitWarning:`Rörlighetsgränser tillämpas inte under manuella förflyttningar — en Bambu-firmware-bugg ignorerar mjukvarustoppar för fjärrkommandon. Flytta försiktigt för att undvika kollision.`,title:`Manuella kontroller`,bed:`Byggplatta`,step:`Steg (mm)`,up:`Flytta upp platta`,down:`Flytta ner platta`,toolheadUp:`Flytta upp extruderhuvud`,toolheadDown:`Flytta ner extruderhuvud`,disabledWhilePrinting:`Inaktiverad under utskrift`,notHomedTitle:`Skrivaren är inte riktad`,notHomedMessage:`Skrivaren har inte riktats sedan senaste utskriften. Kör auto-riktning för säker positionering (parkerar verktygshuvudet, riktar sedan X, Y och Z), eller flytta ändå — mjukvarustoppar kommer att ignoreras.`,homeZ:`Auto-riktning`,moveAnyway:`Flytta ändå`,homingStarted:`Auto-riktning pågår…`},permission:{noAdd:`Du har inte behörighet att lägga till skrivare`,noEdit:`Du har inte behörighet att redigera skrivare`,noDelete:`Du har inte behörighet att ta bort skrivare`,noControl:`Du har inte behörighet att kontrollera skrivare`,noFiles:`Du har inte behörighet att komma åt skrivarens filer`,noAmsRfid:`Du har inte behörighet att läsa om AMS-RFID`,noSmartPlugControl:`Du har inte behörighet att kontrollera smarta kontakter`,noCamera:`Du har inte behörighet att visa kameror`},modal:{addTitle:`Lägg till skrivare`,editTitle:`Redigera skrivare`,myPrinter:`Min skrivare`,selectModel:`Välj modell...`,locationGroup:`Plats / grupp (valfritt)`,locationPlaceholder:`t.ex. Verkstad, Kontor, Källare`,autoArchiveLabel:`Auto-arkivera färdiga utskrifter`,fromPrinterSettings:`Från skrivarens inställningar`,modelOptional:`Modell (valfritt)`,saveChanges:`Spara ändringar`},skipObjects:{tooltip:`Hoppa över objekt`,onlyWhilePrinting:`Hoppa över objekt (endast under utskrift)`,requiresMultiple:`Hoppa över objekt (kräver 2+ objekt)`,title:`Hoppa över objekt`,matchIdsInfo:`Matcha ID:n med skrivarens display`,printerShowsIds:`Skrivarens skärm visar objekt-ID:n på byggplattan`,skipSelected:`Hoppa över valda`,skipping:`Hoppar över...`,noObjectsSelected:`Inga objekt valda`,selectObjectsToSkip:`Välj objekt du vill hoppa över från den aktuella utskriften`,skipped:`hoppades över`,objectsSkipped:`Objekt hoppades över`,activeCount:`{{count}} aktiva`,waitForLayer:`Vänta på skikt 2+ för att hoppa över objekt (nuvarande skikt {{layer}})`,skip:`Hoppa över`,confirmTitle:`Hoppa över objekt?`,confirmMessage:`Är du säker på att du vill hoppa över "{{name}}"? Detta kan inte ångras.`,confirmAllMessage:`Alla återstående objekt är valda. Detta kommer att stoppa utskriftsjobbet. Fortsätta?`,confirmMultipleMessage:`Hoppa över {{count}} valda objekt? Detta kan inte ångras.`},confirm:{deleteTitle:`Ta bort skrivare`,deleteMessage:`Är du säker på att du vill ta bort "{{name}}"? Detta kommer att ta bort alla anslutningsinställningar.`,deleteArchivesNote:`All utskriftshistorik för denna skrivare kommer att tas bort permanent.`,keepArchivesNote:`Utskriftshistorik kommer att behållas men inte längre vara kopplad till denna skrivare.`,stopTitle:`Stoppa utskrift`,stopMessage:`Är du säker på att du vill stoppa den aktuella utskriften på "{{name}}"? Detta kommer att avbryta utskriftsjobbet.`,stopButton:`Stoppa utskrift`,pauseTitle:`Pausa utskrift`,pauseMessage:`Är du säker på att du vill pausa den aktuella utskriften på "{{name}}"?`,pauseButton:`Pausa utskrift`,resumeTitle:`Fortsätt utskrift`,resumeMessage:`Är du säker på att du vill fortsätta utskriften på "{{name}}"?`,resumeButton:`Fortsätt utskrift`,powerOnTitle:`Sätt på skrivare`,powerOnMessage:`Är du säker på att du vill sätta på strömmen för "{{name}}"?`,powerOnButton:`Sätt på`,powerOffTitle:`Stäng av skrivare`,powerOffMessage:`Är du säker på att du vill stänga av strömmen för "{{name}}"?`,powerOffWarning:`VARNING: "{{name}}" skriver för närvarande ut! Är du säker på att du vill stänga av strömmen? Detta kommer att avbryta utskriften och kan skada skrivaren.`,powerOffButton:`Stäng av`,haToggleTitle:`Växla "{{name}}"`,haToggleMessage:`Växla Home Assistant-enheten {{entity}}? Detta kan stänga av strömmen om den för närvarande är på.`,haToggleWarning:`VARNING: "{{name}}" skriver för närvarande ut! Att växla {{entity}} kan bryta strömmen och avbryta utskriften. Fortsätta?`,haToggleButton:`Växla`},bulk:{select:`Välj`,selectAll:`Välj alla`,selectByLocation:`Välj efter plats`,selected:`{{count}} valda`,actions:{stop:`Stoppa`,pause:`Pausa`,resume:`Fortsätt`,clearPlate:`Töm byggplatta`,clearHMS:`Rensa notiser`},confirm:{stopTitle:`Stoppa {{count}} utskrifter`,stopMessage:`Detta kommer att avbryta aktiva utskrifter på {{count}} skrivare. Denna åtgärd kan inte ångras.`,stopButton:`Stoppa alla`,pauseTitle:`Pausa {{count}} utskrifter`,pauseMessage:`Detta kommer att pausa aktiva utskrifter på {{count}} skrivare.`,pauseButton:`Pausa alla`,clearPlateTitle:`Töm {{count}} byggplattor`,clearPlateMessage:`Detta kommer att tömma byggplattan på {{count}} skrivare och kan utlösa köade jobb.`,clearPlateButton:`Töm alla`},success:`{{action}} slutförd på {{count}} skrivare`,partial:`{{succeeded}} lyckades, {{failed}} misslyckades`,noneApplicable:`Inga valda skrivare är i rätt tillstånd för denna åtgärd`,selectByState:`Välj efter status`},discovery:{title:`Hitta skrivare`,searching:`Söker...`,scanning:`Skannar...`,scanProgress:`Skannar... {{scanned}}/{{total}}`,foundPrinters:`Hittade {{count}} skrivare`,noPrintersFound:`Inga skrivare hittade`,noPrintersFoundSubnet:`Inga skrivare hittade i det angivna subnätet.`,noPrintersFoundNetwork:`Inga skrivare hittade i nätverket.`,allConfigured:`Alla hittade skrivare är redan konfigurerade.`,alreadyAdded:`Redan tillagd`,select:`Välj`,manualEntry:`Manuell inmatning`,addFromCloud:`Lägg till från molnet`,subnetToScan:`Subnät att söka`,dockerNote:`Docker upptäckt. Ange din skrivares subnät i CIDR-notation. Kräver network_mode: host i docker-compose.yml.`,scanSubnet:`Skanna subnät efter skrivare`,discoverNetwork:`Hitta skrivare i nätverket`,scanningSubnet:`Söker subnät efter Bambu-skrivare...`,scanningNetwork:`Söker nätverk...`,serialRequired:`Serienummer krävs`,unknown:`Okänd`,failedToStart:`Kunde inte starta skanning`,customSubnetOption:`Anpassat subnät...`,customSubnetLabel:`Anpassat subnät (CIDR)`,customSubnetNote:`Använd ett anpassat subnät om din skrivare är på ett annat nätverk än denna server. FTP (990) och MQTT (8883) portarna måste vara nåbara över routningsgränsen.`},drying:{start:`Starta torkning`,stop:`Stoppa torkning`,temperature:`Temperatur`,duration:`Varaktighet`,hours:`timmar`,timeRemaining:`{{time}} kvar`,active:`Torkar`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`Torkning stöds inte`,powerRequired:`Anslut AMS-strömadapter för att aktivera torkning`,cannotDryNow:`AMS kan inte börja torka just nu`,startingDrying:`Startar torkning...`,toastCommandSent:`Torkningskommando skickat`,toastStopped:`Torkning stoppad`,toastNotStarted:`Skrivaren accepterade kommandot men AMS startade aldrig torkning. Kontrollera att AMS-strömadaptern är ansluten och att skrivaren är inaktiv.`,screenOnly:`AMS-torkning på denna skrivare kan endast kontrolleras från skrivarens egen skärm (Bambu-begränsning)`,stoppingDrying:`Stoppar torkning...`,rotateTray:`Roterar rulle under torkning`,rotateUnavailableReason:`Ej tillgänglig — en slot i denna AMS är laddad till verktygshuvudet. Rullen är låst av matarröret och kan inte rotera. Dra tillbaka filamentet först.`,startMode:`Starttid`,modeNow:`Nu`,modeDelay:`Efter fördröjning`,modeAtTime:`Vid tidpunkt`,schedule:`Schemalägg`,scheduledFor:`Torkning schemalagd för {{time}}`,scheduledAsap:`Torkning schemalagd (väntar på skrivare)`,cancelScheduled:`Avbryt schemalagd torkning`,scheduleFailed:`Kunde inte schemalägga torkning`,retractFilament:`Dra tillbaka filamentet vid AMS-utloppet för att starta torkning`,waitingAmsNotFound:`Väntar på att AMS ska upptäckas`,waitingOffline:`Väntar på att skrivaren ska bli online`,waitingPrinterBusy:`Väntar på att skrivaren ska bli ledig`,waitingAlreadyDrying:`Väntar på att den aktuella torkningscykeln ska slutföras`,waitingInterrupted:`Avbruten, kommer att starta om när skrivaren är ledig`,scheduleFailedReason:`Schemalagd torkning misslyckades: {{reason}}`,scheduleFailedUnknown:`Okänt fel`,dismissFailed:`Avfärda`},amsBackup:{titleOn:`AMS filamentbackup är PÅ. Klicka för att inaktivera.`,titleOff:`AMS filamentbackup är AV. Klicka för att aktivera.`,titleUnknown:`AMS filamentbackupstatus ej tillgänglig på denna skrivare.`,toastEnabled:`AMS filamentbackup aktiverad`,toastDisabled:`AMS filamentbackup inaktiverad`,modalTitle:`AMS filamentbackup`,modalHelp:`När det aktiva facket tar slut går skrivaren genom alla matchande fack med samma inställningar och färg i denna ordning.`,modalNoSlots:`Inga filament laddade.`,modalNoPairs:`Inga backup-par — inga fack delar samma filamentprofil och färg.`,extruderRightShort:`H`,extruderLeftShort:`V`,stateOn:`Aktiverad`,stateOff:`Inaktiverad`,stateUnknown:`Stöds inte på denna skrivare`},activeJobSlot:{title:`Detta fack är filament {{n}} i den aktiva utskriften`,ariaLabel:`Aktivt fack {{n}}`},expectedSlot:{title:`Skrivaren väntar på filament i detta fack`,ariaLabel:`Förväntat filamentfack {{n}}`,label:`{{ams}} · Fack {{slot}}`,external:`Extern rulle`},filaments:`Filament`,externalSpool:{hide:`Dölj extern rulle`,show:`Visa extern rulle`},openCameraOverlay:`Öppna kameran i överlägg`,openCameraWindow:`Öppna kameran i nytt fönster`,firmwareUpdateAvailable:`Firmwareuppdatering tillgänglig: {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — Uppdaterad`,firmwareUpdateButton:`Uppdatera`,plateDetection:{noPermission:`Du har inte behörighet att uppdatera skrivare`,enabledClick:`Plattkontroll aktiverad – Klicka för att inaktivera`,disabledClick:`Plattkontroll inaktiverad – Klicka för att aktivera`,manageCalibration:`Hantera plattdetekteringskalibrering`,calibrationRequired:`Kalibrering krävs`,calibrationInstructions:`Se till att byggplattan är <strong>helt tom</strong>, klicka sedan på Kalibrera.`,calibrationDescription:`Kalibrering tar en referensbild av den tomma plattan. Framtida kontroller kommer att jämföras med denna referens för att upptäcka objekt.`,calibrationTip:`<strong>Tips:</strong> Du kan spara upp till 5 kalibreringar för olika plattor. Systemet använder automatiskt den bästa matchningen vid kontroll.`,plateEmpty:`Plattan verkar tom`,objectsDetected:`Objekt upptäckta på plattan`,confidence:`Säkerhet`,difference:`Skillnad`,analysisPreview:`Analysförhandsvisning:`,analysisLegend:`Grön ruta = detekteringsområde, Rött överlägg = skillnad från kalibrering`,savedReferences:`Sparade referenser ({{count}}/{{max}})`,deleteReference:`Ta bort referens`,labelPlaceholder:`Etikett...`,clickToEdit:`{{label}} – Klicka för att redigera`,clickToAddLabel:`Klicka för att lägga till etikett`},speed:{title:`Utskriftshastighet`,silent:`Tyst (50%)`,standard:`Standard (100%)`,sport:`Sport (124%)`,ludicrous:`Löjlig (166%)`},airduct:{title:`Luftkanalsläge`,cooling:`Kylning`,heating:`Uppvärmning`},noSdCard:`Inget SD-kort`,door:{open:`Öppen`,closed:`Stängd`},fans:{partCooling:`Delkylningsfläkt`,auxiliary:`Hjälpfläkt`,leftAuxiliary:`Vänster hjälpfläkt`,exhaust:`Frånluft`,chamber:`Kammarfläkt`},clickToViewHmsErrors:`Klicka för att visa HMS-fel`,aiDetection:{safe:`Säker`,warning:`Varning`,failure:`Fel`,idle:`Inaktiv`,error:`Kontrollerar ej`,unknown:`Startar`,tooltipError:`AI-feldetektering kontrollerar inte denna utskrift: {{reason}} - klicka för detaljer`,tooltipUnknown:`AI-feldetektering: väntar på det första resultatet - klicka för detaljer`,errorHint:`Denna utskrift kontrolleras ej. Detekteringen återupptas automatiskt när problemet nedan är åtgärdat.`,tooltip:`AI-feldetektering: {{status}} (score {{score}}) - klicka för detaljer`,tooltipIdle:`AI-feldetektering aktiverad – övervakning startar med nästa utskrift – klicka för detaljer`,modalTitle:`AI-feldetektering – {{name}}`,currentStatus:`Status`,score:`Poäng`,framesAnalyzed:`Analyserade bilder`,idleHint:`Ingen utskrift övervakas för närvarande. Övervakning startar automatiskt med nästa utskrift.`,lastError:`Senaste fel`,openSettings:`Öppna inställningar`},estimatedCompletion:`Beräknad färdigställningstid`,plateNumber:`Platta {{number}}`,slotOptions:`Fackalternativ`,amsPopup:{friendlyName:`AMS-namn`,friendlyNamePlaceholder:`t.ex. AMS Vänligt Namn`,serialNumber:`Serienummer`,firmwareVersion:`Firmware`,save:`Spara`,clear:`Rensa`,noEditPermission:`Du har inte behörighet att döpa om AMS-enheter`},firmwareModal:{title:`Firmwareuppdatering`,titleUpToDate:`Firmwareinformation`,currentVersion:`Aktuell:`,latestVersion:`Senaste:`,releaseNotes:`Versionsinformation`,checkingPrereqs:`Kontrollerar förutsättningar...`,sdCardReady:`SD-kort redo. Klicka nedan för att ladda upp firmware.`,uploadedSuccess:`Firmware uppladdat till SD-kort!`,applyInstructions:`För att tillämpa uppdateringen på din skrivare:`,step1:`På skrivarens pekskärm, gå till <strong>Inställningar</strong>`,step2:`Navigera till <strong>Firmware</strong>`,step3:`Välj <strong>Uppdatera från SD-kort</strong>`,step4:`Uppdateringen tar 10-20 minuter`,done:`Klar`,starting:`Startar...`,uploadFirmware:`Ladda upp firmware`,uploadFailed:`Kunde inte starta uppladdning: {{error}}`,uploadedToast:`Firmware uppladdat! Trigga uppdatering från skrivarens skärm.`,availableVersions:`Tillgängliga versioner`,usable:`Användbar`,unavailable:`Ej tillgänglig`,installed:`Installerad`,newerBadge:`nyare`,olderBadge:`äldre`,currentBadge:`aktuell`},accessCodePlaceholder:`Lämna tomt för att behålla nuvarande`,roi:{title:`Detekteringsområde (ROI)`,xStart:`X start`,yStart:`Y start`,width:`Bredd`,height:`Höjd`,instruction:`Justera detekteringsområdet för att fokusera på byggplattan. Den gröna rutan i förhandsvisningen visar det aktuella området.`},developerModeWarning:`Utvecklar-LAN-läge är inte aktiverat på: {{names}}. Vissa funktioner kommer kanske inte att fungera.`,howToEnable:`Hur man aktiverar`,incompatibleFile:`Denna fil var slicad för {{slicedFor}}, men denna skrivare är en {{printerModel}}`,dropNotPrintable:`Endast .gcode- och .gcode.3mf-filer kan skrivas ut`,dropToPrint:`Släpp för att skriva ut`,dropToQueue:`Skrivare upptagen`},archives:{media:{title:`Skrivarvideor`,download:`Ladda ner skrivarvideor`,searching:`Kollar skrivaren efter videor`,searchFailed:`Kunde inte kolla efter videor.`,none:`Ingen timelapse- eller IP-kamerabitar hittades för denna utskrift.`,attachedTimelapse:`Bifogad timelapse`,printerFiles:`Filer kvar på skrivaren`,downloadSelected:`Nerladdning vald`,printerMissing:`Skrivaren är inte längre konfigurerad`,timelapseUnavailable:`Timelapse-mappen kunde inte läsas`,ipcamUnavailable:`IP-kameramappen kunde inte läsas`},title:`Utskriftsarkiv`,no3mfBanner:{title:`Vissa av de senaste utskrifterna kunde inte arkiveras med minibilder`,body:`Slicer-programmet lämnade inte .gcode.3mf på skrivarens SD-kort så Bambuddy kunde inte hämta minibilden eller slicer-programmets metadata. Detta beror vanligtvis på att "Lagra skickade filer på extern lagring" är avstängt i slicer-programmet (Bambu Studio / OrcaSlicer).`,docsLink:`Se installationssteg 4`,dismissLabel:`Avfärda denna notis`,docsLinkInternalStorage:`Varför detta händer`,titleInternalStorage:`Vissa av de senaste utskrifterna blev kvar i skrivarens interna lagring`,bodyInternalStorage:`Bambu Studio placerade den slicade filen på skrivarens interna lagring istället för på kortet, så det fanns ingenting för Bambuddy att läsa via FTP. På H2-serien och P2S gör dess Skriv ut-knapp alltid det — endast Skicka erbjuder ett val, och det förvalet är Cache också. Dessa utskrifter arkiveras ändå med sitt namn och tid, bara utan en minibild eller slicer-inställningar. För kompletta arkiv, starta utskriften från Bambuddy, eller slica i OrcaSlicer — eller i Bambu Studio, använd Skicka med Extern valt och starta utskriften därefter. Alla kräver ett kort eller en USB-minne i skrivaren.`,titleNoExternalStorage:`Vissa av de senaste utskrifterna kunde inte arkiveras — ingen lagring i skrivaren`,bodyNoExternalStorage:`Skrivaren rapporterar inget kort eller USB-minne i sitt fack, så den slicade filen hade ingenstans att hamna och Bambuddy hade ingenting att läsa. Sätt in ett och nästa utskrift kommer att arkiveras fullständigt.`,titleInternalHistory:`Vissa av de senaste utskrifterna startades från en fil som redan fanns på skrivaren`,bodyInternalHistory:`Dessa utskrifter kördes från skrivarens eget bibliotek — en omutskrift från dess skärm, en start från Handy, eller en fil som skickades tidigare och skrivits ut senare. Bambuddy läser utskriftsfiler via FTP, som endast betjänar kortet eller USB-minnet, medan skrivaren håller det biblioteket i ett område som FTP inte kan nå, så det fanns ingen 3MF att läsa. Ingen slicer-inställning ändrar detta, eftersom ingenting skickades för dessa utskrifter. De arkiveras ändå med sitt namn och tid, och Redigera arkiv låter dig fylla i det använda filamentet manuellt. För ett komplett arkiv, starta utskriften från Bambuddy eller från din slicer istället.`,titleFtpsCooloff:`Vissa av de senaste utskrifterna kunde inte arkiveras – skrivaren vägrade filanslutningen`,bodyFtpsCooloff:`Bambuddy öppnade skrivarens filöverföringsport (FTPS 990) och skrivaren svarade med något som inte är TLS, så inget kunde läsas från det. Dessa utskrifter arkiveras fortfarande med deras namn och tidpunkt, bara utan en miniatyrbild eller metadata för slicer. Det här är inte en slicer-inställning och inte något du har ändrat - samma modeller och firmware körs normalt på andra installationer, och en påverkad skrivare fungerar vanligtvis igen senare på egen hand. Efter ett sådant misslyckande pausar Bambuddy överföringarna till den skrivaren i fem minuter och kommer tillbaka för filen när pausen försvinner, så ett kort avsnitt fylls av sig själv; ett kort som fortfarande är tomt betyder att vägran var längre än ett nytt försök. Vad som utlöser det är ännu inte känt. Om det fortsätter att hända, aktivera felsökningsloggning på systemsidan och bifoga ett supportpaket till din rapport.`,titleFtpTransferFailed:`Vissa av de senaste utskrifterna kunde inte arkiveras – filöverföringen fick slut på tid`,bodyFtpTransferFailed:`Den slicade filen fanns på skrivarens minneskort och skrivaren serverade den, men överföringen slutfördes inte inom den tillåtna tiden. Vid utskriftsstart hanterar skrivaren också sin kamera, dess statusmeddelanden och uppladdningen av jobb, och en stor 3MF kommer inte alltid igenom allt detta. Dessa utskrifter arkiveras fortfarande med deras namn och timing, bara utan en miniatyrbild eller slicer-metadata. Det här är inte en slicer-inställning och inte något du har ändrat. Bambuddy kommer tillbaka för filen tre gånger under de följande tio minuterna, så de flesta av dessa fyller i sig själva; ett minneskort som fortfarande är tomt betyder att varje försök också fick slut på tid. Om det fortsätter att hända, höj anslutningstidsgränsen under Inställningar > Nätverk > FTP-försök igen.`},searchPlaceholder:`Sök i arkiv...`,filterByPrinter:`Filtrera efter skrivare`,filterByStatus:`Filtrera efter status`,sortBy:`Sortera efter`,sortNewest:`Nyaste först`,sortOldest:`Äldsta först`,sortName:`Namn`,sortDuration:`Varaktighet`,sortLargest:`Största först`,sortSmallest:`Minsta först`,sortSize:`Storlek`,noArchives:`Inga arkiv hittade`,noArchivesSearch:`Inga arkiv matchar din sökning`,originalPrintNotVisible:`Originalutskriften syns inte – prova att nollställa filter`,noArchivesYet:`Inga arkiv än`,prints:`utskrifter`,pagination:{showing:`Visar`,to:`till`,of:`av`,show:`Visa`,page:`Sida`,all:`Alla`},loadingArchives:`Laddar arkiv...`,releaseToUpload:`Släpp för att ladda upp`,showAll:`Visa alla`,showFavoritesOnly:`Visa endast favoriter`,gridView:`Rutnätsvy`,listView:`Listvy`,calendarView:`Kalendervy`,logView:`Utskriftslogg`,manageTags:`Hantera taggar`,showFailedPrints:`Visa misslyckade utskrifter`,hideFailedPrints:`Dölj misslyckade utskrifter`,hideDuplicates:`Dölj dubbletter`,viewOriginalPrint:`Klicka för att visa originalutskrift (#{{id}})`,printTime:`Utskriftstid`,filamentUsed:`Filament använt`,cost:`Kostnad`,preview:`Förhandsgranskning`,deleteArchive:`Ta bort arkiv`,deleteConfirm:`Är du säker på att du vill ta bort detta arkiv?`,favorite:`Favorit`,unfavorite:`Ta bort från favoriter`,viewDetails:`Visa detaljer`,status:{completed:`Slutförd`,failed:`Misslyckad`,stopped:`Stoppad`},toast:{source3mfAttached:`3MF-källfil bifogad: {{filename}}`,failedUploadSource3mf:`Kunde inte ladda upp 3MF-källfil`,source3mfRemoved:`3MF-källfil borttagen`,failedRemoveSource3mf:`Kunde inte ta bort 3MF-källfil`,f3dAttached:`F3D bifogad: {{filename}}`,failedUploadF3d:`Kunde inte ladda upp F3D`,f3dRemoved:`F3D borttagen`,failedRemoveF3d:`Kunde inte ta bort F3D`,timelapseAttached:`Timelapse bifogad: {{filename}}`,timelapseAlreadyAttached:`Timelapse redan bifogad`,noMatchingTimelapse:`Ingen matchande timelapse hittad`,failedScanTimelapse:`Kunde inte söka efter timelapse`,failedAttachTimelapse:`Kunde inte bifoga timelapse`,timelapseRemoved:`Timelapse borttagen`,failedRemoveTimelapse:`Kunde inte ta bort timelapse`,timelapseUploaded:`Timelapse uppladdad: {{filename}}`,failedUploadTimelapse:`Kunde inte ladda upp timelapse`,archiveDeleted:`Arkiv borttaget`,failedDeleteArchive:`Kunde inte ta bort arkiv`,addedToFavorites:`Tillagd i favoriter`,removedFromFavorites:`Borttagen från favoriter`,projectUpdated:`Projekt uppdaterat`,failedUpdateProject:`Kunde inte uppdatera projekt`,linkCopied:`Länk kopierad till urklipp`,failedCopyLink:`Kunde inte kopiera länk`,photoDeleted:`Foto borttaget`,failedDeletePhoto:`Kunde inte ta bort foto`,failedDeleteArchives:`Kunde inte ta bort arkiv`,failedUpdateFavorites:`Kunde inte uppdatera favoriter`,exportDownloaded:`Nedladdning exporterad`,exportFailed:`Export misslyckades`},menu:{print:`Skriv ut`,openInBambuStudio:`Öppna i slicer-program`,slice:`Slica`,externalLink:`Extern länk`,viewOnMakerWorld:`Visa på MakerWorld`,preview3d:`3D-förhandsgranskning`,viewTimelapse:`Visa timelapse`,scanForTimelapse:`Sök efter timelapse`,uploadTimelapse:`Ladda upp timelapse`,removeTimelapse:`Ta bort timelapse`,downloadSource3mf:`Ladda ner 3MF-källfil`,uploadSource3mf:`Ladda upp 3MF-källfil`,replaceSource3mf:`Ersätt 3MF-källfil`,removeSource3mf:`Ta bort 3MF-källfil`,uploadF3d:`Ladda upp F3D`,replaceF3d:`Ersätt F3D`,downloadF3d:`Ladda ner F3D`,removeF3d:`Ta bort F3D`,download:`Ladda ner`,copyDownloadLink:`Kopiera nedladdningslänk`,qrCode:`QR-kod`,viewPhotos:`Visa bilder`,viewPhotosCount:`Visa bilder ({{count}})`,projectPage:`Projektsida`,addToFavorites:`Lägg till i favoriter`,removeFromFavorites:`Ta bort från favoriter`,edit:`Redigera`,printLog:`Utskriftslogg`,goToProject:`Gå till projekt: {{name}}`,addToProject:`Lägg till i projekt`,removeFromProject:`Ta bort från projekt`,loading:`Laddar...`,noProjectsAvailable:`Inga projekt tillgängliga`,searchProjects:`Sök projekt...`,select:`Välj`,deselect:`Avmarkera`,delete:`Ta bort`},permission:{noReprint:`Du har inte behörighet att skriva ut detta arkiv igen`,noAddToQueue:`Du har inte behörighet att lägga till i kö`,noUpdateArchives:`Du har inte behörighet att uppdatera arkiv`,noUploadFiles:`Du har inte behörighet att ladda upp filer`,noDownload:`Du har inte behörighet att ladda ner arkiv`,noCopyLink:`Du har inte behörighet att kopiera nedladdningslänkar`,noDelete:`Du har inte behörighet att ta bort detta arkiv`,noEdit:`Du har inte behörighet att redigera denna post`,noCreate:`Du har inte behörighet att skapa arkiv`},platePicker:{title:`Välj platta för förhandsgranskning`,hint:`Detta arkiv har flera plattor. Välj en för att öppna i GCode-visaren.`,plateLabel:`Platta {{index}}`,objectCount:`{{count}} objekt`,objectCount_plural:`{{count}} objekt`,noGcode:`Detta arkiv har ingen slicad G-kod för förhandsgranskning. Öppna det i Bambu Studio för att slica först.`},card:{previousPlate:`Föregående platta`,nextPlate:`Nästa platta`,plateNumber:`Platta {{index}}`,moreOptions:`Högerklicka för fler alternativ`,addToFavorites:`Lägg till i favoriter`,removeFromFavorites:`Ta bort från favoriter`,cancelled:`avbruten`,failed:`misslyckad`,duplicate:`kopia`,duplicateTitle:`Denna modell har skrivits ut tidigare`,openSource3mf:`Öppna 3MF-källfil i Bambu Studio (högerklicka för fler alternativ)`,downloadF3d:`Ladda ner Fusion 360-designfil`,viewTimelapse:`Visa timelapse`,viewPhoto:`Visa 1 foto`,viewPhotos:`Visa {{count}} foton`,openFolder:`Öppna mapp: {{name}}`,slicedFile:`Slicad fil – redo att skriva ut`,sourceFile:`Endast källfil – ingen AMS-mappning tillgänglig`,gcode:`GCODE`,source:`KÄLLA`,project:`Projekt: {{name}}`,runsBadge:`{{count}} utskrifter`,runsBadgeTitle:`{{count}} utskrifter totalt — {{successful}} lyckade, {{failed}} misslyckade. Klicka för att se hela utskriftsloggen.`,estimated:`Uppskattad: {{time}}`,actual:`Faktisk: {{time}}`,accuracy:`Noggrannhet: {{percent}}%`,filament:`{{weight}}g`,layer:`{{count}} skikt`,layers:`{{count}} skikt`,object:`{{count}} objekt`,objects:`{{count}} objekt`,slicedFor:`Slicad för {{model}}`,uploadedBy:`Uppladdad av`,noPermissionReprint:`Du har inte behörighet att skriva ut igen`,noFileForReprint:`Ingen 3MF-fil tillgänglig — filen kunde inte laddas ner från skrivaren när utskriften registrerades`,slicerAmsMapping:`AMS-mappning sparad ({{printer}})`,slicerAmsMappingTooltip:`Slicer-programmets eget val av AMS-fack sparades för {{printer}}. Bricknummer betyder endast något på den skrivaren, så en omutskrift återanvänder dem endast när den riktas till {{printer}} igen.`,noPermissionEdit:`Du har inte behörighet att redigera arkiv`,noPermissionDelete:`Du har inte behörighet att ta bort arkiv`,openInBambuStudio:`Öppna i slicer-program`,openInBambuStudioToSlice:`Öppna i slicer-program för att slica`,slice:`Slica`,externalLink:`Extern länk`,makerWorld:`MakerWorld: {{designer}}`,viewProject:`Visa projekt`,noExternalLink:`Ingen extern länk`,preview3d:`3D-förhandsgranskning`,download:`Ladda ner`,edit:`Redigera`,delete:`Ta bort`},runLog:{title:`Utskriftslogg`,modalTitle:`Utskriftslogg — {{name}}`,modalTitleFallback:`detta arkiv`,empty:`Inga utskriftshändelser registrerade för detta arkiv än.`,col:{date:`Datum`,status:`Status`,duration:`Varaktighet`,filament:`Filament`,cost:`Kostnad`},status:{completed:`Slutförd`,failed:`Misslyckad`,cancelled:`Avbruten`,stopped:`Stoppad`,skipped:`Hoppad över`,printing:`Skriver ut`}},modal:{deleteArchive:`Ta bort arkiv`,deleteConfirm:`Är du säker på att du vill ta bort "{{name}}"? Denna åtgärd kan inte ångras.`,deleteButton:`Ta bort`,deletePurgeStats:`Ta också bort denna utskrift från Snabbstatistik (filament, tid, kostnad, energi)`,deleteQueueItemsWarning:`{{count}} köade artiklar kopplade till detta arkiv kommer också att tas bort.`,deleteBlockedByPrinting:`Kan inte ta bort — {{count}} köade artiklar skrivs för närvarande ut. Stoppa utskriften först och försök sedan igen.`,removeSource3mf:`Ta bort 3MF-källfil`,removeSource3mfConfirm:`Är du säker på att du vill ta bort 3MF-källfilen från "{{name}}"? Detta kommer att ta bort originalfilen från slicer-programmet.`,removeButton:`Ta bort`,removeF3d:`Ta bort F3D`,removeF3dConfirm:`Är du säker på att du vill ta bort Fusion 360-designfilen från "{{name}}"?`,removeTimelapse:`Ta bort timelapse`,removeTimelapseConfirm:`Är du säker på att du vill ta bort timelapse-videon från "{{name}}"?`,timelapse:`{{name}} — Timelapse`,selectTimelapse:`Välj timelapse`,selectTimelapseDesc:`Ingen automatisk matchning hittad. Välj timelapse för denna utskrift:`,deleteArchives:`Ta bort arkiv`,deleteArchivesConfirm:`Är du säker på att du vill ta bort {{count}} arkiv? Denna åtgärd kan inte ångras.`,deleteCount:`Ta bort {{count}}`},page:{title:`Arkiv`,printsCount:`{{filtered}} av {{total}} utskrifter`,dropFilesHere:`Släpp .3mf-filer här`,releaseToUpload:`Släpp för att ladda upp`,only3mfSupported:`Endast .3mf-filer stöds`,close:`Stäng`,selected:`{{count}} valda`,selectAll:`Välj alla`,tags:`Taggar`,project:`Projekt`,favorite:`Favorit`,delete:`Ta bort`,toggledFavorites:`Växlade favoriter för {{count}} arkiv`,failedUpdateFavorites:`Kunde inte uppdatera favoriter`,archivesDeleted:`{{count}} arkiv borttagna`,failedDeleteArchives:`Kunde inte ta bort arkiv`,photoDeleted:`Foto borttaget`,failedDeletePhoto:`Kunde inte ta bort foto`},list:{name:`Namn`,printer:`Skrivare`,date:`Datum`,size:`Storlek`,actions:`Åtgärder`,hasTimelapse:`Har timelapse`},log:{date:`Datum`,printName:`Utskriftsnamn`,printer:`Skrivare`,user:`Användare`,status:`Status`,duration:`Varaktighet`,filament:`Filament`,filamentUsed:`Filament använt`,cost:`Kostnad`,energy:`Energi`,energyCost:`Energikostnad`,completedAt:`Slutförd`,columns:`Kolumner`,sortBy:`Sortera efter {{column}}`,allPrinters:`Alla skrivare`,allUsers:`Alla användare`,allStatuses:`Alla statusar`,cancelled:`Avbruten`,skipped:`Hoppad över`,dateFrom:`Från`,dateTo:`Till`,noEntries:`Inga utskriftsloggposter hittade`,showing:`Visar {{count}} av {{total}} poster`,rowsPerPage:`Rader`,page:`Sida`,prev:`Föregående`,next:`Nästa`,clearLog:`Rensa logg`,clearLogTitle:`Rensa utskriftslogg`,clearLogConfirm:`Alla utskriftsloggposter kommer att tas bort permanent. Arkiv och köposter påverkas inte. Denna åtgärd kan inte ångras. Är du säker?`,clearLogButton:`Rensa alla`,cleared:`{{count}} loggposter rensade`,clearFailed:`Kunde inte rensa utskriftslogg`,deleteEntryTitle:`Ta bort utskriftsloggpost`,deleteEntryConfirm:`Denna post kommer att tas bort från loggen och dess bidrag till filament, tid och kostnad kommer att tas bort från Snabbstatistik. Matchande arkiv (om något) påverkas inte. Denna åtgärd kan inte ångras.`,entryDeleted:`Utskriftsloggpost borttagen`,entryDeleteFailed:`Kunde inte ta bort utskriftsloggpost`,editEntryTitle:`Redigera utskriftsloggpost`,editEntryDescription:`Klassificera denna utskrift. Widgeten för felanalys grupperar efter dessa värden, så uppdateringar flödar omedelbart till statistiken.`,entryUpdated:`Utskriftsloggpost uppdaterad`,entryUpdateFailed:`Kunde inte uppdatera utskriftsloggpost`,statuses:{completed:`Slutförd`,failed:`Misslyckad`,stopped:`Stoppad`,cancelled:`Avbruten`,skipped:`Hoppad över`}}},dispatchToast:{untitled:`Utskriftsjobb`,startingPrints:`Startar utskrifter`,progressSummary:`{{complete}}/{{total}} klara • Bearbetar: {{processing}}`,expandDetails:`Visa detaljer för utskicksinformation`,collapseDetails:`Dölj detaljer för utskicksinformation`,awaitingPrinter:`Väntar på skrivare…`,status:{processing:`Bearbetar`,completed:`Slutförd`,failed:`Misslyckad`},failed:{generic:`Utskick misslyckades`,upload_failed:`Kunde inte ladda upp till skrivare`,start_command_failed:`Skrivaren avvisade startkommandot`},dismiss:`Avfärda`},pipelineRuns:{title:`Pipeline-körningar`,loading:`Laddar…`,empty:`Inga pipeline-körningar än.`,filter:{pipeline:`Pipeline`,status:`Status`,target:`Mål`,all:`Alla`,allPipelines:`Alla pipelines`,allStatus:`Alla statusar`,allTargets:`Alla mål`,clear:`Rensa filter`,noMatches:`Inga körningar matchar de aktuella filtren.`},totalCount_one:`{{n}} körning`,totalCount_other:`{{n}} körningar`,copies:`{{n}} kopior`,failedCount:`{{n}} misslyckade`,copyN:`Kopiera {{n}}`,retryFailed:`Kunde inte försöka igen`,retryOf:`omförsök av #{{n}}`,pagination:`{{start}}–{{end}} av {{total}}`,cancelledByUser:`Avbruten av användare`,toast:{cancelled:`Körning avbruten`,cancelFailed:`Kunde inte avbryta`,retryStarted:`Omförsök påbörjat`,retryFailed:`Kunde inte försöka igen`,cleared:`{{n}} körningar rensade`,clearFailed:`Kunde inte rensa`},clearLog:`Rensa logg`,clearConfirmTitle:`Rensa logg?`,clearConfirmBody:`Ta bort alla slutförda, misslyckade, avbrutna och delvis misslyckade pipeline-körningar? Pågående körningar behålls. Denna åtgärd kan inte ångras.`,clearConfirmAction:`Rensa`,jobStatus:{pending:`väntande`,awaiting_printer:`väntar på skrivare`,queued:`i kö`,printing:`skriver ut`,completed:`slutförd`,failed:`misslyckad`,cancelled:`avbruten`}},queue:{title:`Utskriftskö`,subtitle:`Schemalägg och hantera dina utskriftsjobb`,filamentShort:{rowBadge:`Otillräckligt filament för den tilldelade rullen`,rowTooltip:`Utskicksschemaläggaren markerade denna post. Klicka på Spela för att se underskottet per fack och bestämma om du vill skriva ut ändå.`,confirmTitle:`Otillräckligt filament`,confirmIntro:`Den tilldelade rullen kan inte tillfredsställa åtminstone ett fack. Skriv ut ändå?`,lineItem:`Fack {{slot}}: behöver {{required}} g, {{remaining}} g kvar`,unknown:`okänd`,printAnyway:`Skriv ut ändå`},slicerAmsMapping:{rowBadge:`AMS-fack sparade för denna skrivare`,rowTooltip:`Detta arkiv innehåller de exakta AMS-fack som slicer-programmet valde, sparade för den skrivare denna post riktar sig till. En omutskrift på den kan återanvända dessa brickor istället för att matcha igen efter typ och färg.`},editQueueItem:`Redigera köad artikel`,selectAllPlates:`Markera alla {{count}} plattor`,deselectAll:`Avmarkera alla`,printQueued:`Utskrift köad`,printQueuedWillStartWhenIdle:`Kommer att starta när skrivaren är inaktiv`,itemsQueued:`{{count}} poster i kö`,sending:`Skickar...`,sendingProgress:`Skickar {{current}}/{{total}}...`,adding:`Lägg till...`,addingProgress:`Lägger till {{current}}/{{total}}...`,savingProgress:`Sparar {{current}}/{{total}}...`,clearQueue:`Rensa kö`,clearHistory:`Rensa historik`,emptyQueue:`Kön är tom`,position:`Position`,scheduledTime:`Schemalagd tid`,moveUp:`Flytta upp`,moveDown:`Flytta ner`,startNow:`Starta nu`,printingInProgress:`Skriver ut...`,viewArchive:`Visa arkiv`,viewInFileManager:`Visa i Filhanteraren`,itemCount:`{{count}} artikel`,itemCount_plural:`{{count}} artiklar`,dragToReorder:`Dra för att ordna om (endast ASAP)`,reorderHint:`Position påverkar endast ASAP-poster. Schemalagda poster körs vid sin inställda tid.`,sjf:{label:`SJF`,tooltip:`Kortast jobb först — schemaläggaren prioriterar korta utskrifter`},addedBy:`Tillagd av {{name}}`,nextInQueue:`Nästa i kön`,clearPlateSuccess:`Platta rensad — redo för nästa utskrift`,plateNumber:`Platta {{index}}`,quantity:`Kvantitet`,quantityHint:`Skapar {{count}} köade artiklar`,plateQuantityLabel:`Körningar av {{plate}}`,plateQuantityTotal_one:`{{count}} körning totalt`,plateQuantityTotal_other:`{{count}} körningar totalt`,batchOrders:{title:`Batchordrar`,emptyTitle:`Inga batchordrar`,emptyDescription:`Köa en fil med flera plattor, eller mer än en kopia av en platta, så visas ordern här med dess framsteg.`,filter:{active:`Aktiv`,completed:`Slutförd`,cancelled:`Avbruten`,all:`Alla`},status:{active:`Aktiv`,completed:`Slutförd`,cancelled:`Avbruten`},noTargets:`Endast gruppering`,noTargetsHint:`Skapad innan per-platta-mål existerade, så den spårar de körningar den köade istället för ett mål.`,dispatchRemaining:`Kö {{count}} återstående`,dispatchPlate:`Kö återstående`,strandedPlate:`Inget kvar att kopiera inställningar från`,strandedNotice:`Kan inte köa {{runs}} av {{owed}} körningar som fortfarande är i skuld: den plattan har ingen kö eller färdig körning kvar att kopiera inställningar från. Ställ plattan i kö en gång från filen, eller avbryt beställningen.`,dispatched:`Köade de återstående körningarna för {{name}}`,plateProgress:`{{completed}} av {{target}} klara`,remaining:`{{count}} återstående`,failed:`{{count}} misslyckade`,printing:`{{count}} skriver ut`,wholeFile:`Hela filen`,due:`Förfaller {{date}}`,costSoFar:`{{amount}} hittills`,costRemaining:`({{amount}} kvar)`},activeBatches:`Aktiva batcher`,batchProgress:`{{completed}} av {{total}} slutförda`,cancelBatch:`Avbryt återstående`,batchCancelled:`Återstående batchartiklar avbrutna`,cancelBatchConfirmTitle:`Avbryt batch`,cancelBatchConfirmMessage:`Avbryt alla återstående väntande artiklar i denna batch?`,batch:{defaultName:`Batch`,label:`{{count}} artikel`,label_plural:`{{count}} artiklar`,pendingCount:`{{count}} väntande`,pendingCount_plural:`{{count}} väntande`,expand:`Expandera batch`,collapse:`Minimera batch`,groupAsBatch:`Gruppera som batch...`,groupAsBatchDescription:`Kombinera de {{count}} markerade posterna till en enda hopfällbar batch.`,nameLabel:`Batchnamn`,namePlaceholder:`t.ex. Fredagspresenter`,create:`Skapa batch`,ungroup:`Avgruppera`,ungroupConfirmTitle:`Avgruppera batch?`,ungroupConfirmMessage:`Posterna kommer att förbli i kön men kommer inte längre att grupperas ihop.`,dragGroup:`Dra grupp`},tabs:{batches:`Batchar`,queue:`Kö`,history:`Historik`,timeline:`Tidslinje`,pipelines:`Pipelines`},layout:{flatList:`Lista`,byPrinter:`Efter skrivare`,groupByPrinter:`Gruppera efter skrivare`},history:{emptyTitle:`Ingen historik än`,emptyDescription:`Slutförda, avbrutna och misslyckade utskrifter kommer att visas här.`,showMore:`Visa mer`,showingCount:`Visar {{shown}} av {{total}}`},dragGhost:{multiCount:`{{count}} poster`,batch:`{{name}} ({{count}} kopia)`,batch_plural:`{{name}} ({{count}} kopior)`},sections:{currentlyPrinting:`Skriver ut nu`,queued:`I kö`,history:`Historik`},status:{pending:`Väntande`,waiting:`Väntar`,printing:`Skriver ut`,paused:`Pausad`,completed:`Slutförd`,failed:`Misslyckad`,skipped:`Hoppad över`,cancelled:`Avbruten`},summary:{printing:`Skriver ut`,queued:`I kö`,totalTime:`Total kötid`,totalWeight:`Total kövikt`,history:`Historik`},filter:{allPrinters:`Alla skrivare`,unassigned:`Otilldelad`,allStatus:`Alla statusar`,allLocations:`Alla platser`,any:`Valfri`},sort:{byPosition:`Sortera efter position`,byName:`Sortera efter namn`,byPrinter:`Sortera efter skrivare`,bySchedule:`Sortera efter schema`,byDate:`Sortera efter datum`,ascendingOldest:`Stigande (äldst först)`,descendingNewest:`Fallande (nyast först)`},badges:{staged:`Förberedd`,requiresPrevious:`Kräver tidigare framgång`,autoPowerOff:`Auto-avstängning`,gcodeInjection:`G-kod`},empty:{title:`Inga utskrifter schemalagda`,description:`Schemalägg en utskrift från Arkiv-sidan med hjälp av "Schemalägg"-alternativet i kontextmenyn, eller dra och släpp filer för att komma igång.`},time:{etaIfStartedNow:`Färdigställningstid om detta jobb startar nu`,whenFree:`När en skrivare är ledig`,overdue:`Försenad`,now:`Nu`,lessThanMinute:`Om mindre än en minut`,inMinutes:`Om {{count}} min`,inHours:`Om {{count}} timmar`},actions:{startPrint:`Starta utskrift`,stopPrint:`Stoppa utskrift`,requeue:`Lägg tillbaka i kö`},bulkEdit:{title:`Redigera {{count}} post`,title_plural:`Redigera {{count}} poster`,description:`Endast ändrade inställningar kommer att tillämpas på valda poster.`,printer:`Skrivare`,noChange:`— Ingen ändring —`,queueOptions:`Köalternativ`,staged:`Förberedd (manuell start)`,autoPowerOff:`Auto-avstängning efter utskrift`,requirePrevious:`Kräv tidigare framgång`,gcodeInjection:`Injicera G-kod`,printOptions:`Utskriftsalternativ`,bedLevelling:`Byggplattsnivåinställning`,flowCalibration:`Flödeskalibrering`,vibrationCalibration:`Vibrationskalibrering`,layerInspection:`Förstaskiktsinspektion`,timelapse:`Timelapse`,useAms:`Använd AMS`,nozzleOffsetCali:`Munstyckesoffsetskalibrering`,applyChanges:`Tillämpa ändringar`,selectAll:`Markera alla`,deselectAll:`Avmarkera alla`,selected:`{{count}} valda`,editSelected:`Redigera valda`,cancelSelected:`Avbryt valda`},confirm:{cancelTitle:`Avbryt schemalagd utskrift`,cancelMessage:`Är du säker på att du vill avbryta "{{name}}"?`,stopTitle:`Stoppa utskrift`,stopMessage:`Är du säker på att du vill stoppa den aktuella utskriften "{{name}}"? Detta kommer att avbryta utskriftsjobbet på skrivaren.`,removeTitle:`Ta bort från historik`,removeMessage:`Är du säker på att du vill ta bort "{{name}}" från köhistoriken?`,clearHistoryTitle:`Rensa historik`,clearHistoryMessage:`Är du säker på att du vill ta bort alla {{count}} poster från historiken?`,cancelButton:`Avbryt utskrift`,stopButton:`Stoppa utskrift`,thisPrint:`denna utskrift`,thisItem:`denna post`},toast:{cancelled:`Köpost avbruten`,cancelFailed:`Kunde inte avbryta post`,removed:`Köpost borttagen`,keptForOrder:`Avbruten istället för borttagen: detta är den enda körningen som dess batchorder kan återställa den här plattan från`,historyKeptForOrders:`Behöll {{kept}} som batchordrar fortfarande behöver.`,removeFailed:`Kunde inte ta bort post`,stopped:`Utskrift stoppad`,stopFailed:`Kunde inte stoppa utskrift`,released:`Utskrift släppt till kö`,startFailed:`Kunde inte starta utskrift`,reorderFailed:`Kunde inte ordna om kö`,historyCleared:`Rensade {{count}} historikpost(er)`,clearHistoryFailed:`Kunde inte rensa historik`,updateFailed:`Kunde inte uppdatera poster`,bulkCancelled:`Avbröt {{count}} post(er)`,bulkCancelFailed:`Kunde inte avbryta poster`,batchCreated:`Batch "{{name}}" skapad`,batchCreateFailed:`Kunde inte skapa batch`,batchUngrouped:`Avgrupperade {{count}} post(er)`,batchUngroupFailed:`Kunde inte avgruppera batch`,resumedAfterFailure:`Återupptog kö — {{restored}} jobb återställda till väntande`,resumeAfterFailureFailed:`Kunde inte återuppta kö`},resumeAfterFailure:{banner:`{{printer}} är blockerad av ett tidigare utskriftsfel — {{count}} jobb hoppades över`,bannerHint:`Åtgärda skrivarproblemet, sedan återuppta för att återställa de hoppade jobben och rensa blockeringen.`,button:`Återuppta efter fel`,confirmTitle:`Återuppta kö efter fel?`,confirmMessage:`Återställ {{count}} hoppade jobb på {{printer}} till väntande och rensa blockeringen för tidigare utskrift. Se till att skrivaren är redo innan du fortsätter.`},timeline:{listView:`Lista`,timelineView:`Tidslinje`,unassigned:`Otilldelad`,noData:`Inga schemalagda utskrifter för denna dag`,nothingCommitted:`Inga fastställda scheman i detta fönster. Förberedda poster, väntande poster och ASAP-jobb på inaktiva skrivare visas inte — ange en schemalagd tid eller släpp en förberedd post för att se den här.`,allDoneBy:`Alla utskrifter beräknas vara klara till {{time}}`,staged:`Förberedd`,filterAll:`Visa alla`,filterPrinting:`Skriver ut`,filterQueued:`I kö`,time:{anyMoment:`när som helst`,minutesLeft:`{{minutes}}m kvar`,hoursLeft:`{{hours}}h kvar`,hoursMinutesLeft:`{{hours}}h {{minutes}}m kvar`},day:{previous:`Föregående dag`,next:`Nästa dag`,today:`Idag`},window:{back12h:`Bakåt 12 timmar`,forward12h:`Framåt 12 timmar`,now:`Nu`},printerColumnHeader:`Skrivare`},permissions:{noStopPrint:`Du har inte behörighet att stoppa utskrifter`,noStartPrint:`Du har inte behörighet att starta utskrifter`,noEdit:`Du har inte behörighet att redigera denna köpost`,noCancel:`Du har inte behörighet att avbryta denna köpost`,noRequeue:`Du har inte behörighet att lägga tillbaka poster i kön`,noRemove:`Du har inte behörighet att ta bort denna köpost`,noClearHistory:`Du har inte behörighet att rensa all historik`,noEditItems:`Du har inte behörighet att redigera köposter`,noCancelItems:`Du har inte behörighet att avbryta köposter`}},stats:{title:`Statistik`,subtitle:`Dra widgetar för att omordna. Klicka på ögonikonen för att dölja.`,overview:`Översikt`,totalPrints:`Totala utskrifter`,successRate:`Framgångsgrad`,totalPrintTime:`Total utskriftstid`,printTime:`Utskriftstid`,totalFilament:`Totalt filament använt`,filamentUsed:`Filament använt`,filamentCost:`Filamentkostnad`,totalCost:`Total kostnad`,energyUsed:`Energi använt`,energyCost:`Energikostnad`,energyWarmingUpTooltip:`Energispårning samlar fortfarande in timvisa ögonblicksbilder. Datumintervallstotaler kommer att bli korrekta när åtminstone en ögonblicksbild existerar före det valda intervallet. Tidiga värden kan underskattas.`,averagePrintTime:`Genomsnittlig utskriftstid`,printsPerDay:`Utskrifter per dag`,byPrinter:`Efter skrivare`,printsByPrinter:`Utskrifter efter skrivare`,byMaterial:`Efter material`,byMonth:`Efter månad`,last7Days:`Senaste 7 dagarna`,last30Days:`Senaste 30 dagarna`,last90Days:`Senaste 90 dagarna`,allTime:`All tid`,quickStats:`Snabbstatistik`,printActivity:`Utskriftsaktivitet`,filamentTypes:`Filamenttyper`,filamentTrends:`Filamenttrender`,failureAnalysis:`Felanalys`,timeAccuracy:`Tidsnoggrannhet`,successful:`Lyckade:`,failed:`Misslyckade:`,cancelled:`Avbrutna:`,perfectEstimate:`100% = perfekt uppskattning`,noTimeAccuracyData:`Ingen tidsnoggrannhetsdata än`,noFilamentData:`Ingen filamentdata tillgänglig`,noPrinterData:`Ingen skrivardata tillgänglig`,noPrintData:`Ingen utskriftsdata tillgänglig`,noPrintDataLast30Days:`Ingen utskriftsdata de senaste 30 dagarna`,failureReasons:`Orsaker till fel`,topFailureReasons:`Vanligaste orsaker till fel`,failedPrintsCount:`{{failed}} / {{total}} utskrifter misslyckades`,lastWeekRate:`Förra veckan: {{rate}}%`,resetLayout:`Återställ layout`,recalculateCosts:`Omberäkna kostnader`,recalculateCostsHint:`Omberäkna alla arkivkostnader med nuvarande filamentpriser`,exportStats:`Exportera statistik`,exportAsCsv:`Exportera som CSV`,exportAsExcel:`Exportera som Excel`,hiddenCount:`{{count}} dolda`,exportDownloaded:`Export nedladdad`,exportFailed:`Kunde inte exportera`,layoutReset:`Layout återställd`,recalculatedCosts:`Omberäknade kostnader för {{count}} arkiv`,recalculateFailed:`Kunde inte omberäkna kostnader`,loadingStats:`Laddar statistik...`,noPermissionResetLayout:`Du har inte behörighet att återställa layout`,noPermissionRecalculate:`Du har inte behörighet att omberäkna kostnader`,noPrintDataInRange:`Ingen utskriftsdata i det valda intervallet`,periodFilament:`Periodens filament`,periodCost:`Periodens kostnad`,avgPerPrint:`Genomsnitt per utskrift`,usageOverTime:`Användning över tid`,energyOverTime:`Energi över tid`,filamentByWeight:`Vikt`,printDuration:`Utskriftsvaraktighet`,printerUtilization:`Skrivaranvändning`,filamentSuccess:`Framgång efter material`,printHabits:`Utskriftsvanor`,printTimeOfDay:`Utskriftstid på dagen`,colorDistribution:`Färgsfördelning`,noColorData:`Ingen färgdata tillgänglig`,records:`Rekord`,longestPrint:`Längsta utskrift`,heaviestPrint:`Tungsta utskrift`,mostExpensivePrint:`Dyraste utskrift`,busiestDay:`Mest aktiva dagen`,successStreak:`Framgångssvit`,streakPrint:`utskrift i rad`,streakPrints:`{{count}} utskrifter i rad`,printerStats:`Skrivarstatistik`,hours:`timmar`,avgPrints:`Genomsnittliga utskrifter`,noArchiveData:`Ingen utskriftsdata tillgänglig`,filamentByTime:`Tid`,avgWeight:`Genomsnittsvikt`,avgTime:`Genomsnittstid`,filamentByPrints:`Utskrifter`,timeframe:{today:`Idag`,"this-week":`Denna vecka`,"this-month":`Denna månad`,"last-7":`Senaste 7 dagarna`,"last-30":`Senaste 30 dagarna`,"last-90":`Senaste 90 dagarna`,"this-year":`Detta år`,"all-time":`All tid`,custom:`Anpassat intervall`,from:`Från`,to:`Till`},allUsers:`Alla användare`,noUser:`Ingen användare (System)`,filterByUser:`Filtrera efter användare`},maintenance:{title:`Underhåll`,overview:`Översikt`,allOk:`Allt underhåll är gjort`,dueCount:`{{count}} underhåll uteblivet`,dueCount_plural:`{{count}} underhåll uteblivna`,warningCount:`{{count}} varning`,warningCount_plural:`{{count}} varningar`,totalPrintTime:`Total utskriftstid`,nextMaintenance:`Nästa underhåll`,nothingDue:`Inget uteblivet`,tasks:`Uppgifter`,lastPerformed:`Senast utfört`,interval:`Intervall`,hoursRemaining:`{{hours}}h kvar`,hoursOverdue:`{{hours}}h försenat`,markDone:`Markera som klar`,performMaintenance:`Utför underhåll`,history:`Historik`,noHistory:`Ingen underhållshistorik`,editPrintHours:`Redigera utskriftstimmar`,currentHours:`Aktuella timmar`,statusTab:`Status`,settingsTab:`Inställningar`,overdueCount:`{{count}} försenade`,dueSoonCount:`{{count}} förfaller snart`,dueSoon:`Förfaller snart`,allGood:`Allt bra`,overdueBy:`Försenat med {{duration}}`,dueIn:`Förfaller om {{duration}}`,timeLeft:`{{duration}} kvar`,day:`1 dag`,days:`{{count}} dagar`,week:`1 vecka`,weeks:`{{count}} veckor`,month:`1 månad`,months:`{{count}} månader`,year:`1 år`,maintenanceTypes:`Underhållstyper`,maintenanceTypesDescription:`Systemtyper och dina anpassade underhållsuppgifter`,addCustomType:`Lägg till anpassad typ`,restoreDefaults:`Återställ standarduppgifter`,intervalType:`Intervalltyp`,intervalValue:`Intervall ({{type}})`,icon:`Ikon`,documentationLink:`Dokumentationslänk (valfritt)`,assignToPrinters:`Tilldela till skrivare`,selectAtLeastOnePrinter:`Välj minst en skrivare`,addType:`Lägg till typ`,custom:`Anpassad`,printHours:`Utskriftstimmar`,calendarDays:`Kalenderdagar`,exampleName:`t.ex. Byt HEPA-filter`,viewDocumentation:`Visa dokumentation`,timeBasedInterval:`Tidsbaserat intervall`,intervalOverrides:`Intervall-överskridningar`,intervalOverridesDescription:`Anpassa intervall för specifika skrivare`,assignedToPrinters:`Tilldelad till skrivare:`,noPrintersAssigned:`Inga skrivare tilldelade`,addPrinterShort:`Lägg till:`,printersAssignedClick:`{{count}} skrivare tilldelade – klicka för att hantera`,removeFromPrinter:`Ta bort från denna skrivare`,types:{lubricateCarbonRods:`Smörj karbonstänger`,lubricateRails:`Smörj linjära skenor`,cleanNozzle:`Rengör munstycke/värmeblock`,checkBelts:`Kontrollera remspänning`,cleanBuildPlate:`Rengör byggplatta`,checkExtruder:`Kontrollera extruderarkugghjul`,checkCooling:`Kontrollera kylfläktar`,generalInspection:`Allmän besiktning`,cleanCarbonRods:`Rengör karbonstänger`,lubricateSteelRods:`Smörj stålstänger`,cleanSteelRods:`Rengör stålstänger`,cleanLinearRails:`Rengör linjära skenor`,checkPtfeTube:`Kontrollera PTFE-rör`,replaceHepaFilter:`Byt HEPA-filter`,replaceCarbonFilter:`Byt kolfilter`,lubricateLeftNozzleRail:`Smörj vänster munstyckesskena`},maintenanceComplete:`Underhåll markerat som klart`,typeUpdated:`Underhållstyp uppdaterad`,typeDeleted:`Underhållstyp borttagen`,defaultsRestored:`Återställde {{count}} standarduppgift(er)`,printHoursUpdated:`Utskriftstimmar uppdaterade`,printerAssigned:`Skrivare tilldelad`,printerRemoved:`Skrivare borttagen`,deleteTypeConfirm:`Ta bort "{{name}}"?`,deleteSystemTypeTitle:`Ta bort standardunderhållsuppgift?`,deleteSystemTypeMessage:`Är du säker på att du vill ta bort standardunderhållsuppgift "{{name}}"?`,noPermissionUpdate:`Du har inte behörighet att uppdatera underhållsposter`,noPermissionPerform:`Du har inte behörighet att utföra underhåll`,noPermissionEditTypes:`Du har inte behörighet att redigera underhållstyper`,noPermissionDeleteTypes:`Du har inte behörighet att ta bort underhållstyper`,noPermissionEditHours:`Du har inte behörighet att redigera utskriftstimmar`,noPermissionRemovePrinter:`Du har inte behörighet att ta bort skrivartilldelningar`,noPermissionAssignPrinter:`Du har inte behörighet att tilldela skrivare`,noPermissionEditIntervals:`Du har inte behörighet att redigera intervall`,configureSettings:`Konfigurera underhållstyper och intervall`},settings:{sliceEngine:`Slicer-motor`,sliceEngineSidecar:`Server-sidecar`,sliceEngineSidecarHint:`Slicing körs på servern, i slicerns sidecar-container.`,sliceEngineBrowser:`I webbläsaren`,sliceEngineBrowserHint:`Slicing körs på denna enhet, utan server inblandad.`,title:`Inställningar`,general:`Allmänt`,tabs:{general:`Allmänt`,smartPlugs:`Smarta kontakter`,sensors:`Sensorer`,notifications:`Notiser`,queue:`Arbetsflöde`,queueDispatch:`Kö och utskick`,queuePipelines:`Pipelines`,filament:`Filament`,network:`Nätverk`,apiKeys:`API-nycklar`,virtualPrinter:`Virtuell skrivare`,spoolbuddy:`SpoolBuddy`,failureDetection:`Feldetektering`,users:`Autentisering`,backup:`Säkerhetskopia`,emailAuth:`E-postautentisering`,ldap:`LDAP`,twoFa:`Tvåfaktorsautentisering`,oidc:`SSO / OIDC`,security:`Säkerhet`},spoolbuddy:{infoTitle:`SpoolBuddy-enheter`,infoBody:`SpoolBuddy-kiosker registrerar sig automatiskt via hjärtklapp. Avregistrera en enhet här om den inte längre används eller om en gammal dubblett lämnats kvar av en krasch i demonen.`,duplicatesTitle:`{{count}} enheter registrerade`,duplicatesBody:`Endast den första registrerade enheten används av kiosk-gränssnittet. Om en av dessa är en gammal dubblett från en krasch, avregistrera den — en online-enhet kommer att registrera sig själv igen vid nästa hjärtklapp.`,empty:`Inga SpoolBuddy-enheter registrerade än.`,online:`Online`,offline:`Offline`,unregister:`Avregistrera`,unregisterSuccess:`Enhet avregistrerad`,unregisterError:`Kunde inte avregistrera enhet`,confirmTitle:`Avregistrera SpoolBuddy-enhet?`,confirmBody:`Detta kommer att ta bort "{{hostname}}" ({{deviceId}}) från databasen. Om enheten är online kommer den att registrera sig själv igen vid nästa hjärtklapp.`,ipAddress:`IP-adress`,firmware:`Firmware`,lastSeen:`Senast sedd`,daemonUptime:`Demonens upptid`,systemUptime:`Systemets upptid`,never:`aldrig`,nfc:`NFC`,scale:`Skala`,cpuTemp:`CPU-temperatur`,cpuLoad:`CPU-belastning`,memory:`Minne`,disk:`Disk`,update:`Uppdatera`,updateConfirmTitle:`Uppdatera SpoolBuddy-demon?`,updateConfirmBody:`Trigga en programuppdatering på "{{hostname}}"? Demonen kommer att starta om när uppdateringen är klar.`,restartBrowser:`Starta om webbläsaren`,restartBrowserConfirmTitle:`Starta om kiosk-webbläsaren?`,restartBrowserConfirmBody:`Starta om kiosk-webbläsaren på "{{hostname}}"? Skärmen kommer att vara tom en kort stund.`,restartDaemon:`Starta om demonen`,restartDaemonConfirmTitle:`Starta om SpoolBuddy-demonen?`,restartDaemonConfirmBody:`Starta om SpoolBuddy-demonen på "{{hostname}}"? Enheten kommer att vara offline i några sekunder.`,reboot:`Starta om`,rebootConfirmTitle:`Starta om enheten?`,rebootConfirmBody:`Starta om "{{hostname}}"? Enheten kommer att vara offline i cirka en minut.`,shutdown:`Stäng av`,shutdownConfirmTitle:`Stäng av enhet?`,shutdownConfirmBody:`Stäng av "{{hostname}}"? Du kommer att behöva fysisk åtkomst för att starta den igen.`,commandConfirm:`Bekräfta`,commandQueued:`Kommando köat`,commandError:`Kunde inte skicka kommando`},ldap:{title:`LDAP-autentisering`,enabledDesc:`LDAP-autentisering är aktiverat`,disabledDesc:`LDAP-autentisering är inaktiverat`,disabledHint:`Konfigurera och spara LDAP-inställningar nedan, aktivera sedan.`,enabled:`LDAP-autentisering aktiverad`,disabled:`LDAP-autentisering inaktiverad`,feature1:`Användare kan logga in med LDAP-uppgifter`,feature2:`Lokalt admin-konto kvarstår som reserv`,feature3:`LDAP-grupper mappas till Bambuddy-grupper vid inloggning`,serverConfig:`LDAP-serverkonfiguration`,serverUrl:`Server-URL`,serverUrlHint:`Använd ldaps:// för SSL eller ldap:// med StartTLS`,security:`Säkerhet`,securityHint:`StartTLS uppgraderar en vanlig anslutning till TLS. LDAPS använder TLS från början.`,bindDn:`Bind DN (Service-konto)`,bindPassword:`Bind-lösenord`,searchBase:`Sök bas-DN`,userFilter:`Användarsökfilter`,userFilterHint:`{username} ersätts med inloggningsanvändarnamnet. Använd (uid={username}) för OpenLDAP.`,advanced:`Avancerat`,autoProvision:`Auto-provisionera användare`,autoProvisionHint:`Skapa automatiskt ett Bambuddy-konto vid första LDAP-inloggning`,defaultGroup:`Standardgrupp`,defaultGroupNone:`— Ingen (ingen reserv) —`,defaultGroupHint:`Reservgrupp som tilldelas när en LDAP-användare autentiseras men inte finns i någon mappad LDAP-grupp. Lämna tomt för att lämna omappade användare utan behörigheter.`,groupMapping:`Gruppmappning (JSON)`,groupMappingHint:`Mappa LDAP-grupp-DN till Bambuddy-grupper. Tillgängliga grupper: `,testConnection:`Testa anslutning`,settingsSaved:`LDAP-inställningar sparade`,errors:{serverRequired:`LDAP-server-URL krävs`,searchBaseRequired:`Sök bas-DN krävs`,enableAuthFirst:`Aktivera autentisering först`,configureLdapFirst:`Spara LDAP-inställningar först`}},email:{smtpSettings:`SMTP-konfiguration`,smtpHost:`SMTP-server`,smtpPort:`SMTP-port`,security:`Säkerhet`,authentication:`Autentisering`,username:`Användarnamn`,password:`Lösenord`,fromEmail:`Från e-post`,fromName:`Från namn`,testConnection:`Testa SMTP-anslutning`,testRecipient:`Testmottagare e-post`,sendTest:`Skicka test-e-post`,sending:`Skickar...`,save:`Spara inställningar`,saving:`Sparar...`,advancedAuth:`Avancerad autentisering`,advancedAuthEnabled:`Avancerad autentisering är aktiverad`,advancedAuthEnabledDesc:`E-postbaserade användarhanteringsfunktioner är aktiva. Nya användare kommer att få autogenererade lösenord via e-post, och användare kan återställa sina lösenord via "Glömt lösenord"-funktionen.`,advancedAuthDisabled:`Avancerad autentisering är inaktiverad`,advancedAuthDisabledDesc:`Aktivera avancerad autentisering för att aktivera e-postbaserade funktioner för användarhantering.`,enable:`Aktivera`,disable:`Inaktivera`,feature1:`Lösenord genereras automatiskt och skickas via e-post till nya användare`,feature2:`Användare kan logga in med användarnamn eller e-post`,feature3:`"Glömt lösenord"-funktionen är tillgänglig`,feature4:`Admin kan återställa användarlösenord via e-post`,errors:{requiredFields:`Fyll i alla obligatoriska fält`,usernameRequired:`Användarnamn krävs när autentisering är aktiverad`,enterTestEmail:`Ange en test-e-postadress`,smtpServerAndEmail:`Fyll i SMTP-server och Från e-post innan du testar`,usernamePasswordRequired:`Användarnamn och lösenord krävs när autentisering är aktiverat`,configureSmtpFirst:`Konfigurera och testa SMTP-inställningar först`,enableAuthFirst:`Aktivera autentisering först för att använda e-postbaserade funktioner.`},success:{settingsSaved:`SMTP-inställningar sparade`},securityOptions:{starttls:`STARTTLS (Port 587)`,ssl:`SSL/TLS (Port 465)`,none:`Ingen (Port 25)`},authOptions:{enabled:`Aktiverad`,disabled:`Inaktiverad`}},appearance:`Utseende`,notifications:`Notiser`,smartPlugs:`Smarta kontakter`,spoolman:`Spoolman`,updates:`Uppdateringar`,language:`Språk`,languageDescription:`Välj ditt föredragna språk`,theme:`Tema`,themeLight:`Ljust`,themeDark:`Mörkt`,themeSystem:`System`,defaultView:`Standardvy`,defaultViewDescription:`Sida att visa när appen öppnas`,checkForUpdates:`Sök efter uppdateringar`,autoUpdate:`Auto-uppdatering`,currentVersion:`Aktuell version`,latestVersion:`Senaste version`,upToDate:`Du har den senaste versionen`,updateAvailable:`Uppdatering tillgänglig`,notificationLanguage:`Notisspråk`,notificationLanguageDescription:`Språk för push-notiser`,bedCooledThreshold:`Tröskelvärde för sval byggplatta`,bedCooledThresholdDescription:`Temperatur under vilken byggplattan anses sval efter en utskrift`,userNotificationsEnabled:`Användarnotiser`,userNotificationsEnabledDescription:`Aktivera menyn för användarnotiser och e-postnotiser för utskriftshändelser. Kräver avancerad autentisering.`,userNotificationsDisabledHint:`Aktivera avancerad autentisering för att använda användarnotiser.`,notificationProviders:`Notisleverantörer`,addProvider:`Lägg till leverantör`,editProvider:`Redigera leverantör`,providerType:`Leverantörstyp`,testNotification:`Testnotis`,testSuccess:`Testnotis skickad`,testFailed:`Kunde inte skicka testnotis`,quietHours:`Tysta timmar`,quietHoursDescription:`Stör ej under dessa timmar`,quietHoursStart:`Start`,quietHoursEnd:`Slut`,events:{title:`Notishändelser`,printStart:`Utskrift startad`,printComplete:`Utskrift slutförd`,printFailed:`Utskrift misslyckades`,printStopped:`Utskrift stoppad`,printProgress:`Förloppsmilstolpar`,printProgressDescription:`Notis vid 25%, 50%, 75%`,printerOffline:`Skrivare offline`,printerError:`Skrivarfel`,filamentLow:`Lågt filament`,maintenanceDue:`Underhåll behövs`,maintenanceDueDescription:`Notis när underhåll behövs`},smartPlug:{title:`Smarta kontakter`,add:`Lägg till smart kontakt`,edit:`Redigera smart kontakt`,name:`Namn`,ipAddress:`IP-adress`,linkedPrinter:`Länkad skrivare`,autoOn:`Auto ström på`,autoOnDescription:`Sätt på när utskrift startar`,autoOff:`Auto ström av`,autoOffDescription:`Stäng av efter att utskrift slutförts`,offDelay:`Avstängningsfördröjning`,offDelayMinutes:`Minuter efter utskrift`,offDelayTemp:`När munstycket är under temperatur`,currentState:`Aktuell status`,turnOn:`Sätt på`,turnOff:`Stäng av`},filamentTracking:`Filamentspårning`,filamentTrackingDesc:`Välj hur du vill spåra dina filamentrullar. Du kan använda det inbyggda inventariet eller ansluta till en extern Spoolman-server.`,autoAddUnknownRfid:`Lägg automatiskt till okända RFID-rullar`,autoAddUnknownRfidDesc:`Skapa automatiskt en inventariepost när en rulle med en okänd RFID-tagg upptäcks. Stäng av om du förregistrerar nya rullar manuellt för att undvika dubbletter.`,filamentChecks:`Filamentkontroller`,disableFilamentWarnings:`Inaktivera filamentvarningar`,disableFilamentWarningsDesc:`Visa inte varningar om otillräckligt filament vid utskrift eller kö`,preferLowestFilament:`Föredra rulle med minst filament kvar`,preferLowestFilamentDesc:`När flera rullar matchar, använd den med minst filament kvar`,preferLowestFilamentBackupNote:`Gäller endast när AMS filamentbackup är aktiverat på skrivaren — annars kan skrivaren inte byta till en andra rulle när den valda tar slut.`,trackingModeBuiltIn:`Inbyggd inventering`,trackingModeBuiltInDesc:`RFID-auto-matchning och användningsspårning inkluderad`,trackingModeSpoolmanDesc:`Extern filamenthanteringsserver`,builtInFeatureRfid:`Upptäcker automatiskt Bambu Lab RFID-rullar i AMS`,builtInFeatureUsage:`Spårar filamentförbrukning per utskrift`,builtInFeatureCatalog:`Hantera rullar, färger och K-faktorprofiler`,builtInFeatureThirdParty:`Tredjepartsrullar kan tilldelas till inventeringsrullar`,amsSyncButton:`Synkronisera vikter från AMS`,amsSyncTitle:`Synkronisera rullvikter från AMS`,amsSyncMessage:`Detta kommer att skriva över alla rullar i inventariet med vikter från de aktuella AMS-procentvärdena från anslutna skrivare. Använd detta för att återställa från korrupt viktdata. Skrivaren måste vara online.`,amsSyncing:`Synkroniserar...`,amsSyncSuccess:`{{synced}} rulle(ar) synkroniserade, {{skipped}} hoppades över`,amsSyncError:`Kunde inte synkronisera vikter från AMS`,spoolmanAmsSyncButton:`Synkronisera Spoolman-vikter från AMS`,spoolmanAmsSyncTitle:`Synkronisera Spoolman-rullvikter från AMS`,spoolmanAmsSyncMessage:`Detta kommer att uppdatera alla Spoolman-rullars vikter baserat på de aktuella AMS-procentvärdena från anslutna skrivare. Skrivaren måste vara online.`,spoolmanAmsSyncing:`Synkroniserar...`,spoolmanAmsSyncSuccess:`{{synced}} rulle(ar) synkroniserade, {{skipped}} hoppades över`,spoolmanAmsSyncError:`Kunde inte synkronisera Spoolman-vikter från AMS`,spoolmanAmsSyncErrorUnreachable:`Kunde inte synkronisera Spoolman-vikter (Spoolman otillgänglig)`,spoolmanAmsSyncErrorNotConfigured:`Kunde inte synkronisera Spoolman-vikter (Spoolman ej konfigurerad)`,spoolmanNotConfigured:`Spoolman ej konfigurerad`,spoolmanFilamentCatalogTitle:`Spoolman filamentkatalog`,spoolmanFilamentCatalogDesc:`Filamentnamn och taravikter från din Spoolman-instans. Namn och rullvikt kan redigeras här; alla andra egenskaper hanteras direkt i Spoolman.`,spoolmanUrl:`Spoolman-URL`,spoolmanUrlHint:`URL till din Spoolman-server (t.ex. http://localhost:7912)`,spoolmanConnected:`Ansluten`,spoolmanDisconnected:`Frånkopplad`,status:`Status`,connect:`Anslut`,disconnect:`Koppla från`,howSyncWorks:`Hur synkronisering fungerar`,syncInfoRfidOnly:`Endast officiella Bambu Lab-rullar med RFID synkroniseras`,syncInfoAutoCreate:`Nya rullar skapas automatiskt i Spoolman vid första synkronisering`,syncInfoThirdPartySkipped:`Icke-Bambu Lab-rullar (tredjepart, påfyllda) hoppas över`,linkingExistingSpools:`Länka befintliga rullar`,linkingExistingSpoolsDesc:`För att länka befintliga Spoolman-rullar till din AMS, håll musen över ett AMS-fack och klicka på "Länka till Spoolman".`,syncMode:`Synkroniseringsläge`,syncModeAuto:`Automatisk`,syncModeManual:`Endast manuell`,syncModeAutoDesc:`AMS-data synkroniseras automatiskt när ändringar upptäcks`,syncModeManualDesc:`Synkroniserar endast vid manuell aktivering`,syncAmsData:`Synkronisera AMS-data`,syncAmsDataDesc:`Synkronisera skrivarens AMS-data till Spoolman manuellt`,allPrinters:`Alla skrivare`,noDefaultPrinter:`Ingen standard (fråga varje gång)`,sidebarOrder:`Sidofältsordning`,saveThumbnails:`Spara minibilder`,captureFinishPhoto:`Ta färdig-foto`,noPrintersConfigured:`Inga skrivare konfigurerade`,archiveMode:{always:`Skapa alltid arkivpost`,never:`Skapa aldrig arkivpost`,ask:`Fråga varje gång`},checkForUpdatesLabel:`Sök efter uppdateringar`,checkPrinterFirmware:`Kontrollera skrivarens firmware`,includeBetaUpdates:`Inkludera betaversioner`,includeBetaUpdatesDesc:`Notis om betaversioner och förhandsversioner vid sökning av uppdateringar`,localLogin:{disable:`Inaktivera lokal användarnamn/lösenordsinloggning`,disableHint:`När aktiverat kan endast SSO-leverantörer logga in. LDAP påverkas inte. Sätt BAMBUDDY_LOCAL_LOGIN=true på servern för att behålla en återställningsväg.`},enableRetry:`Aktivera försök igen`,homeAssistantDescription:`Kontrollera smarta kontakter via Home Assistant`,environmentManagedLabel:`(Hanterad av miljövariabler)`,autoEnabledViaEnv:`Automatiskt aktiverad via miljövariabler`,urlFromEnvReadOnly:`Värde inställt av HA_URL-miljövariabel (skrivskyddad)`,tokenFromEnvReadOnly:`Värde inställt av HA_TOKEN-miljövariabel (skrivskyddad)`,mqttConnectedTo:`Ansluten till`,prometheusDescription:`Exponera skrivardata i Prometheus-format`,noSmartPlugsTitle:`Inga smarta kontakter konfigurerade`,noSmartPlugsDescription:`Lägg till en Tasmota-baserad smart kontakt för att spåra energiförbrukning och automatisera strömkontroll.`,noProvidersTitle:`Inga leverantörer konfigurerade`,noProvidersDescription:`Lägg till en leverantör för att ta emot aviseringar.`,noTemplatesAvailable:`Inga mallar tillgängliga. Starta om backend för att ladda standardmallar.`,apiPermissionView:`Visa skrivarstatus och kö`,apiPermissionEdit:`Lägg till och ta bort poster från utskriftskö`,apiKeysEmptyTitle:`Inga API-nycklar`,apiKeysEmptyDescription:`Skapa en API-nyckel för att integrera med externa tjänster.`,noUsersFound:`Inga användare hittade`,noGroupsFound:`Inga grupper hittade`,noGroupsAvailable:`Inga grupper tillgängliga`,passwordsDoNotMatch:`Lösenorden matchar ej`,systemGroupWarning:`Systemgruppnamn kan inte ändras`,authDisabledTitle:`Autentisering är inaktiverat`,authDisabledFeature1:`Kräv inloggning för att komma åt systemet`,authDisabledFeature2:`Skapa flera användare med gruppbaserade behörigheter`,authDisabledFeature3:`Kontrollera åtkomst med 50+ detaljerade behörigheter`,userHasCreated:`Denna användare har skapat:`,userItemsQuestion:`Vad vill du göra med dessa objekt?`,deleteUserConfirm:`Är du säker på att du vill ta bort denna användare?`,actionCannotBeUndone:`Denna åtgärd kan inte ångras.`,addFirstSmartPlug:`Lägg till din första smarta kontakt`,providers:`Leverantörer`,log:`Logg`,testAll:`Testa alla`,testResults:`Testresultat`,testPassedCount:`{{count}} godkända`,testFailedCount:`{{count}} misslyckade`,messageTemplates:`Meddelandemallar`,messageTemplatesDescription:`Anpassa notismeddelanden för varje händelse.`,apiKeys:`API-nycklar`,apiKeysDescription:`Skapa API-nycklar för externa integrationer och webhooks.`,createKey:`Skapa nyckel`,apiKeyCreated:`API-nyckel skapad`,apiKeyCopyWarning:`Kopiera denna nyckel nu – den kommer inte att visas igen!`,useInApiBrowser:`Använd i API-läsaren`,apiKeyQrButton:`QR-kod`,apiKeyQrTitle:`Skanna för att konfigurera`,apiKeyQrCaption:`Skanna med din mobilapp för att lägga till denna server och API-nyckel.`,apiKeyQrWarning:`Innehåller din hemliga API-nyckel — dela inte eller ta skärmdump där andra kan se den.`,createNewApiKey:`Skapa ny API-nyckel`,keyName:`Nyckelnamn`,keyNamePlaceholder:`t.ex. Home Assistant, OctoPrint`,readStatus:`Läs status`,readStatusDescription:`Visa skrivarstatus och kö`,manageQueue:`Hantera kö`,manageQueueDescription:`Lägg till och ta bort poster från utskriftskö`,controlPrinter:`Kontrollera skrivare`,controlPrinterDescription:`Pausa, fortsätt och stoppa utskrifter`,manageLibrary:`Hantera bibliotek`,manageLibraryDescription:`Ladda upp, döp om och ta bort biblioteksfiler; importera modeller från MakerWorld`,manageInventory:`Hantera inventarier`,manageInventoryDescription:`Skapa, uppdatera och ta bort rullar och inventeringsposter. Krävs för SpoolBuddy-kiosker (NFC-skanning, vågläsningar, kiosksystemkommandon).`,manageMaintenance:`Hantera underhåll`,manageMaintenanceDescription:`Logga slutfört underhåll, återställ räknare, redigera intervall och hantera underhållstypkatalogen. Lämplig för Home Assistant-automatiseringar som registrerar "Jag rengjorde munstycket" utan att ge bredare skrivarkontroll.`,manageArchives:`Hantera arkiv`,manageArchivesDescription:`Redigera och ta bort utskriftsarkiv, inklusive borttagning av gamla utskrifter. Inkluderar inte borttagning av deras statistikbidrag. Lämplig för automatiseringar som rensar utskriftshistoriken.`,manageProjects:`Hantera projekt`,manageProjectsDescription:`Skapa, uppdatera och ta bort projekt, samt lägg till arkiv i dem. Lämplig för automatiseringar som organiserar utskrifter i projekt.`,libraryBadge:`Bibliotek`,inventoryBadge:`Inventarium`,maintenanceBadge:`Underhåll`,archivesBadge:`Arkiv`,projectsBadge:`Projekt`,cloudAccess:`Tillåt molnåtkomst`,cloudAccessDescription:`Läs Bambu Cloud-inställningar och filament å dina vägnar. Kräver att du är inloggad på Bambu Cloud.`,cloudBadge:`Moln`,updateEnergyCost:`Uppdatera elpris`,updateEnergyCostDescription:`Tillåt denna nyckel att POST:a ett nytt pris per kWh till /settings/electricity-price. Användbart för Home Assistants dynamiska tariffautomatiseringar (Tibber, Octopus, etc.). Detta är det enda inställningsfält som kan skrivas via API-nyckel.`,energyCostBadge:`Energi`,legacyKey:`Äldre nyckel`,legacyKeyTooltip:`Skapad före användarägande; skapa igen för att använda molnåtkomst`,unnamedKey:`Namnlös nyckel`,lastUsed:`Senast använd`,read:`Läs`,control:`Kontroll`,createFirstKey:`Skapa din första nyckel`,webhookEndpoints:`Webhook-ändpunkter`,webhookApiKeyHint:`Använd din API-nyckel i adressinformationen för X-API-Key.`,webhook:{getAllStatus:`Hämta alla skrivarstatusar`,getSpecificStatus:`Hämta specifik skrivarstatus`,addToQueue:`Lägg till i utskriftskö`,pausePrint:`Pausa utskrift`,resumePrint:`Fortsätt utskrift`,stopPrint:`Stoppa utskrift`},apiBrowser:`API-läsare`,apiBrowserDescription:`Utforska och testa alla tillgängliga API-ändpunkter.`,apiKeyForTesting:`API-nyckel för testning`,apiKeyPlaceholder:`Klistra in din API-nyckel här för att testa autentiserade ändpunkter...`,apiKeyHint:`Denna nyckel kommer att skickas som X-API-Key-adressinformation med förfrågningarna.`,deleteApiKeyTitle:`Ta bort API-nyckel`,deleteApiKeyMessage:`Är du säker på att du vill ta bort denna API-nyckel? Alla integrationer som använder denna nyckel kommer att sluta fungera.`,deleteKey:`Ta bort nyckel`,amsDisplayThresholds:`AMS-visningströskelvärden`,amsThresholdsDescription:`Konfigurera färgernas tröskelvärden för AMS:ens luftfuktighets- och temperaturindikatorer.`,humidity:`Luftfuktighet`,goodGreen:`God (grön)`,fairOrange:`Godkänd (orange)`,aboveFairBad:`Över godkänt tröskelvärde visas som röd (dålig)`,fairAlsoDryingThreshold:`Detta tröskelvärde används också för att trigga auto-torkning när det är aktiverat`,fairBelowDryingFloor:`Auto-torkning kan inte nå detta värde: en AMS läser {{floor}}% eller mer medan dess värmare körs, så varje cykel skulle sluta och starta om omedelbart. Höj den över {{floor}}% om auto-torkning är på.`,temperature:`Temperatur`,goodBlue:`God (blå)`,aboveFairHot:`Över godkänt tröskelvärde visas som röd (varm)`,tempAlarmThreshold:`Larma över`,tempAlarmSeparateFromBand:`Endast larmtröskeln skickar meddelanden — God och Godkänd färgar displayen. Lämna den tom för att larma vid Godkänd-tröskeln, som tidigare.`,tempAlarmMustBePositive:`Ett tröskelvärde på 0 eller lägre ignoreras — larmet faller tillbaka till Godkänd-tröskelvärdet.`,historyRetention:`Bevarande av historik`,keepSensorHistory:`Bevara sensordata för`,historyRetentionDescription:`Äldre luftfuktighets- och temperaturdata kommer att tas bort automatiskt`,defaultPrintOptions:`Standardutskriftsalternativ`,defaultPrintOptionsDescription:`Sätt standardvärden för utskriftsalternativ när nya utskrifter startas. Dessa kan åsidosättas per utskrift i utskriftsdialogrutan.`,defaultBedLevelling:`Byggplattsnivåinställning`,defaultBedLevellingDesc:`Ställer in byggplattan automatiskt före utskrift`,defaultFlowCali:`Flödeskalibrering`,defaultFlowCaliDesc:`Kalibrera extruderingsflöde`,defaultVibrationCali:`Vibrationskalibrering`,defaultVibrationCaliDesc:`Minska ringningsartefakter`,defaultLayerInspect:`Förstaskiktsinspektion`,defaultLayerInspectDesc:`AI-inspektion av första skiktet`,defaultTimelapse:`Timelapse`,defaultTimelapseDesc:`Spela in timelapse-video`,defaultNozzleOffsetCali:`Munstyckesoffsetkalibrering`,defaultNozzleOffsetCaliDesc:`Kalibrera munstyckesoffsetar mellan extruderare`,tempFanPresetsTitle:`Temperatur- och fläktförinställningar`,tempFanPresetsDescription:`Anpassa snabbvalsvärden som visas i skrivarkortets temperatur- och fläkthastighets-popovers. Av-knappen visas alltid.`,tempFanPresetsNozzle:`Munstyckstemperatur`,tempFanPresetsBed:`Byggplattstemperatur`,tempFanPresetsChamber:`Kammartemperatur`,tempFanPresetsFan:`Fläkthastighet`,tempFanPresetsReset:`Återställ till standard`,concurrentUploadsTitle:`Samtidiga uppladdningar`,concurrentUploadsDescription:`Hur många skrivare kön kan skicka filer till samtidigt. Skrivare tar emot filer långsamt (en stor utskrift kan ta flera minuter), och varje skrivare väntar på sin tur — så med en större flotta är det detta som förhindrar att den sista skrivaren i en batch väntar på alla överföringar före den. Sänk detta om ditt nätverk eller din Bambuddy-värd har svårt med parallella överföringar.`,concurrentUploadsLabel:`Skrivare som laddas upp till samtidigt`,concurrentUploadsHelp:`1 skickar till en skrivare i taget (gammalt beteende). Standard är 4.`,staggeredStart:`Förskjuten start`,staggeredStartDescription:`Standardgruppstorlek och intervall vid förskjuten start av batchutskrifter på flera skrivare. Kan åsidosättas per batch i utskriftsdialogrutan.`,preheatTitle:`Förvärme`,preheatDescription:`Värm byggplattan (och kammaren, om stödjes) och håll temperaturen före varje köad utskrift startar. Användbart för tekniska filament (PA, ABS) på skrivare utan aktiv kammarvärmare — byggplattan värmer kammaren med värmestrålning medan varmhållningstimern går. Måltemperaturen för byggplattan läses från utskriftsfilen; kammarbeteendet beror på skrivarmodell.`,preheatEnabled:`Aktivera förvärme och varmhållning`,preheatEnabledDesc:`När avstängt skickas köade utskrifter omedelbart. Varje köpost kan åsidosättas per utskrift.`,preheatFilamentTargetsLabel:`Kammarmål per filamenttyp (°C)`,preheatFilamentTargetsHint:`Bambuddy väljer det högsta målet bland de laddade AMS-facken; utskrifter med endast PLA får värdet 0 och hoppar automatiskt över kammarfasen.`,preheatFilamentTargetsReset:`Återställ till standard`,preheatFilamentTargetsDefaultRow:`Övrigt / omappat`,preheatMaxWait:`Max väntetid (sekunder)`,preheatMaxWaitHelp:`Begränsning för kammaruppvärmningsfasen innan den hoppar över.`,preheatSoak:`Varmhållning (sekunder)`,preheatSoakHelp:`Hålltid efter att måltemperaturen nåtts eller max-väntetiden passerat.`,preheatHardwareTitle:`Handlingssätt per skrivare:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E värmer kammaren aktivt via M141. X1C/P2S läser kammartemperatur men förlitar sig på byggplattans byggplattsvärme. P1S/P1P/A1/A1 Mini har ingen kammarsensor — endast varmhållningstimern gäller.`,preheatPerItemDesc:`Värm byggplattan och kammaren före denna utskrift startar. Standard är den globala inställningen Inställningar → Arbetsflöde.`,preheatOverride_inherit:`Ärv`,preheatOverride_on:`På`,preheatOverride_off:`Av`,calibrationMode_off:`Av`,calibrationMode_on:`På`,calibrationMode_auto:`Auto`,preheatTargetOverride:`Kammartemperatur-åsidosättning (°C, tom = standard för filamentet)`,preheatTargetOverrideHelp:`0 värmer plattan och kör uppvärmningen utan kammaren. Lämna tomt och en utskrift utan kammarkrav hoppar över förvärmningen helt.`,plateClear:`Bekräftelse för tömd platta`,requirePlateClear:`Kräv bekräftelse för tömd platta`,requirePlateClearDescription:`När aktiverat väntar schemaläggaren på bekräftelse för tömd platta per skrivare innan köade utskrifter startar på skrivare med slutförda jobb. Om detta inaktiveras döljs också plattstatusbadgen och knappen "Markera platta som tömd" på skrivarkorten.`,keepBedWarm:`Håll plattan varm mellan utskrifterna`,keepBedWarmDesc:`Tills plattan är tömd, håll plattan vid varmhållningstemperaturen nedan så att kammaren förblir varm - eller vid nästa utskrifts egen plattemperatur om den är högre. Gäller endast när nästa utskrift behöver kammarvärme (ASA, ABS, PA, PC etc.). Kräver en bekräftelse på tömd platta för att vara aktiverad.`,keepWarmBedTemp:`Varmhållningstemperatur för platta (°C)`,keepWarmBedTempHelp:`Används när plattans uppgift är att värma upp kammaren — hålla värmen och förvärma när utskriftsfilen inte har någon plattemperatur. En högre plattemperatur från utskriftsfilen vinner alltid.`,keepWarmMaxMinutes:`Sluta hålla värmen efter (minuter)`,keepWarmMaxMinutesHelp:`Om plattan inte töms inom denna tid, stängs värmarna av istället för att hållas på obestämd tid.`,gcodeInjection:`G-kodinjicering`,gcodeInjectionDescription:`Konfigurera anpassad G-kod för att injiceras i början och/eller slutet av utskrifter för auto-utskriftssystem som Farmloop, SwapMod, AutoClear och Printflow 3D. Kodsnuttar konfigureras per skrivarmodell och tillämpas när "Injicera G-kod" är aktiverat på en köpost.`,gcodeInjectionNoPrinters:`Inga skrivare hittade. Lägg till skrivare för att konfigurera G-kod-snuttar.`,gcodeStartLabel:`Start-G-kod`,gcodeEndLabel:`Slut-G-kod`,gcodeStartPlaceholder:`G-kod som läggs till före utskriftens start...`,gcodeEndPlaceholder:`G-kod som läggs till efter utskriftens slut...`,staggerGroupSize:`Gruppstorlek`,staggerGroupSizeHelp:`Skrivare som startar samtidigt per grupp`,staggerInterval:`Intervall (minuter)`,staggerIntervalHelp:`Fördröjning mellan varje grupps start`,queueDrying:`Köa auto-torkning`,queueDryingDescription:`Torka AMS-filament automatiskt när skrivaren är inaktiv mellan köade utskrifter. Använder tröskelvärdet för luftfuktighet ovan för att trigga torkning.`,queueDryingEnabled:`Aktivera auto-torkning`,queueDryingEnabledDescription:`Starta AMS-torkning automatiskt när skrivaren är inaktiv och luftfuktigheten är över tröskelvärdet`,queueDryingBlock:`Vänta på att torkning slutförts`,queueDryingBlockDescription:`Blockera utskriftskön tills torkningen är klar. När avstängt prioriteras utskrifter över torkning.`,ambientDryingEnabled:`Bakgrundstorkning`,ambientDryingEnabledDescription:`Torka filament automatiskt på inaktiva skrivare när luftfuktigheten överskrider tröskelvärdet, även utan köade utskrifter.`,printDryingEnabled:`Fortsätt torka under utskrift`,printDryingEnabledDescription:`Tillåt auto-torkning att fortsätta köra under en utskrift på hårdvara som stödjer det (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L med senaste firmware). Torkningstemperaturen begränsas automatiskt till 5°C under idle-förinställningen för att skydda rullar.`,dryingPresets:`Torkningsförinställningar`,dryingPresetsDescription:`Temperatur och varaktighet per filamenttyp. AMS 2 Pro använder lägre temperaturer, AMS-HT stöder högre temperaturer.`,dryingFilament:`Filament`,humidityThresholds:`Tröskelvärden för luftfuktighet`,humidityThresholdsDescription:`Luftfuktighetsutlösare per filament för auto-torkning och larm. Blandade laddningar i en AMS använder det lägsta tröskelvärdet.`,humidityThresholdCol:`Tröskelvärde`,humidityThresholdDefault:`Standard (okända typer)`,printModal:`Utskriftsdialogruta`,expandCustomMapping:`Expandera anpassad mappning som standard`,expandCustomMappingDescription:`När utskrift skickas till flera skrivare, visa utökad AMS-mappning per skrivare`,authentication:`Autentisering`,authEnabledDescription:`Din instans är skyddad med användarautentisering`,authDisabledDescription:`Aktivera för att kräva inloggning och hantera användaråtkomst`,authDisabledMessage:`Aktivera autentisering för att skapa användarkonton, hantera behörigheter och skydda din Bambuddy-instans.`,enableAuthentication:`Aktivera autentisering`,currentUser:`Aktuell användare`,changePassword:`Ändra lösenord`,admin:`Admin`,users:`Användare`,addUser:`Lägg till användare`,groups:`Grupper`,addGroup:`Lägg till grupp`,system:`System`,noDescription:`Ingen beskrivning`,userCount:`{{count}} användare`,permissionCount:`{{count}} behörigheter`,createUser:`Skapa användare`,username:`Användarnamn`,enterUsername:`Ange användarnamn`,password:`Lösenord`,enterPassword:`Ange lösenord`,passwordRequirements:`Minst 8 tecken, med en versal, en gemen, en siffra och ett specialtecken.`,confirmPassword:`Bekräfta lösenord`,confirmPasswordPlaceholder:`Bekräfta lösenord`,viewReleaseOnGitHub:`Visa release på GitHub`,turnAllPlugsOn:`Sätt på alla kontakter`,turnAllPlugsOff:`Stäng av alla kontakter`,clearNotificationLogs:`Rensa notisloggar`,clearLogsMessage:`Detta kommer permanent ta bort alla notisloggar äldre än 30 dagar. Denna åtgärd kan inte ångras.`,clearLogs:`Rensa loggar`,resetUiPreferences:`Återställ UI-inställningar`,resetUiPreferencesMessage:`Detta kommer återställa alla UI-inställningar till standard: sidofältsordning, tema, instrumentpanelslayout, visningslägen och sorteringsinställningar. Dina skrivare, arkiv och serverinställningar kommer INTE att påverkas. Sidan kommer att laddas om efter rensning.`,resetPreferences:`Återställ inställningar`,deleteGroupTitle:`Ta bort grupp`,deleteGroupMessage:`Är du säker på att du vill ta bort denna grupp? Användare i denna grupp kommer att förlora dessa behörigheter.`,deleteGroup:`Ta bort grupp`,disableAuthenticationTitle:`Inaktivera autentisering`,disableAuthenticationMessage:`Är du säker på att du vill inaktivera autentisering? Detta kommer att göra din Bambuddy-instans tillgänglig utan inloggning. Alla användare kommer att finnas kvar i databasen, men autentisering kommer att vara inaktiverat.`,disableAuthentication:`Inaktivera autentisering`,configureBambuddy:`Konfigurera Bambuddy`,systemDefault:`Systemstandard`,archiveSettings:`Arkivinställningar`,newWindow:`Nytt fönster`,embeddedOverlay:`Inbäddat överlägg`,preferredSlicer:`Föredragen slicer`,preferredSlicerDescription:`Slicer som används för slicing i appen via API-sidecar`,openInSlicerLabel:`Öppna i slicer`,openInSlicerInherit:`Samma som API-slicer`,openInSlicerDescription:`Slicer som används av knappen 'Öppna i slicer'. Lämna på 'Samma som API-slicer' för att ärva, eller välj en annan slicer för lokal användning.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev har kända CLI-buggar som blockerar slicing av många Bambu-skapade 3MF-filer — se uppströmsproblem #12426 (segmenteringsfel på målade multi-extruder-filer) och #13386 (parameterintervall strikt valideringsavvisning). Bambu Studio rekommenderas tills uppströmsfixarna landar.`,useSlicerApi:`Använd Slicer API`,useSlicerApiDescription:`När aktiverat öppnar slicing-åtgärder den inbyggda slicing-dialogrutan och anropar slicer-API-sidecar. När avstängt (standard) skickas de vidare till slicern via URI-schema.`,slicerCard:`Slicer`,orcaslicerApiUrl:`OrcaSlicer sidecar-URL`,bambuStudioApiUrl:`Bambu Studio sidecar-URL`,slicerStallTimeout:`Slicer-timeout (minuter)`,slicerStallTimeoutDescription:`Ge upp på en slicing efter denna tid utan framsteg från sidecaren. Tunga modeller som fortsätter rapportera framsteg avbryts aldrig, oavsett hur lång tid de tar. Sidecars som inte rapporterar framsteg använder denna tid som total tidsgräns istället.`,slicerApiUrlDescription:`URL till slicing-API-sidecar-containern. Lämna tomt för att använda SLICER_API_URL / BAMBU_STUDIO_API_URL-miljövariablerna som standard.`,externalCameras:`Externa kameror`,costTracking:`Kostnadsspårning`,billingEnabled:`Aktivera fakturering`,billingEnabledDescription:`Debitera användare för utskrifter och aktivera finansfunktioner`,printerKillSwitch:`Nödstoppsknapp för obehörig utskrift`,printerKillSwitchDescription:`Stoppa omedelbart utskrifter som startar utan auktorisering.`,financeBudgetReset:`Återställ månadsbudget för finanser`,financeBudgetResetDay:`Återställningsdag`,financeBudgetResetDayHelp:`För korta månader används den sista dagen i månaden för återställning.`,financeBudgetResetTimezone:`Återställningstidszon`,financeBudgetResetTimezoneHelp:`Budgetfönstrets start beräknas i denna tidszon.`,rebuildLedger:`Regenerera bokföring`,rebuildLedgerStarted:`Regenerering av bokföring påbörjad`,rebuildLedgerConfirmTitle:`Regenerera bokföring?`,rebuildLedgerConfirmMessage:`Detta kommer att regenerera bokföringen för att reparera historiska saldovärden. Kör detta endast om du vet vad du gör.`,rebuildLedgerInProgress:`Startar regenerering...`,printsOnly:`Endast utskrifter`,totalConsumption:`Total förbrukning`,dataManagement:`Datahantering`,storageUsage:`Lagringsanvändning`,storageUsageDescription:`Fördelning av dataanvändning per kategori`,storageUsageTotal:`Totalt`,storageUsageErrors:`Felmeddelanden`,storageUsageOtherBreakdown:`Övrigt (inkluderar statiska objekt, skript och konfigurationsfiler)`,storageUsageSystem:`System`,storageUsageData:`Data`,storageUsageUnavailable:`Lagringsinformation ej tillgänglig`,clearNotificationLogsDescription:`Ta bort notisloggar äldre än 30 dagar`,resetUiPreferencesDescription:`Återställ sidofältsordning, tema, visningslägen och layoutinställningar. Skrivare, arkiv och inställningar påverkas inte.`,enableHomeAssistant:`Aktivera Home Assistant`,enableMqtt:`Aktivera MQTT`,useTls:`Använd TLS`,enableMetricsEndpoint:`Aktivera mätvärdesändpunkt`,availableMetrics:`Tillgängliga mätvärden`,editUser:`Redigera användare`,deleteUserTitle:`Ta bort användare`,groupName:`Gruppnamn`,leaveEmptyForAnonymous:`Lämna tomt för anonym`,leaveEmptyForNoAuth:`Lämna tomt för ingen autentisering`,enterNewPassword:`Ange nytt lösenord`,confirmNewPassword:`Bekräfta nytt lösenord`,enterGroupName:`Ange gruppnamn`,enterDescriptionOptional:`Ange beskrivning (valfritt)`,enterCurrentPassword:`Ange nuvarande lösenord`,enterNewPasswordMin6:`Ange nytt lösenord (minst 6 tecken)`,toast:{keyCopied:`Nyckel kopierad till urklipp`,copyFailed:`Kunde inte kopiera nyckel`,keyAddedToBrowser:`Nyckel tillagd till API-läsaren`,clearLogsFailed:`Kunde inte rensa loggar`,uiPreferencesReset:`UI-inställningar återställda. Uppdaterar...`,authDisabled:`Autentisering inaktiverad`,authDisableFailed:`Kunde inte inaktivera autentisering`,apiKeyCreated:`API-nyckel skapad`,apiKeyDeleted:`API-nyckel borttagen`,userCreated:`Användare skapad`,userUpdated:`Användare uppdaterad`,userDeleted:`Användare borttagen`,groupCreated:`Grupp skapad`,groupUpdated:`Grupp uppdaterad`,groupDeleted:`Grupp borttagen`,fillRequiredFields:`Fyll i alla obligatoriska fält`,passwordsDoNotMatch:`Lösenorden matchar ej`,passwordTooShort:`Lösenordet måste vara minst 8 tecken`,passwordNeedsUppercase:`Lösenordet måste innehålla minst en versal`,passwordNeedsLowercase:`Lösenordet måste innehålla minst en gemen`,passwordNeedsDigit:`Lösenordet måste innehålla minst en siffra`,passwordNeedsSpecial:`Lösenordet måste innehålla minst ett specialtecken`,enterGroupName:`Ange ett gruppnamn`,settingsSaved:`Inställningar sparade`,noPermissionUpdate:`Du har inte behörighet att ändra inställningar`,cameraSettingsSaved:`Kamerainställningar sparade`,enterCameraUrl:`Ange URL för en kamera`,passwordChanged:`Lösenord ändrat`,connectionFailed:`Anslutning misslyckades`,testFailed:`Test misslyckades`,cameraConnected:`Kamera ansluten{{resolution}}`,cameraConnectedCoalesced:`Kamera ansluten{{resolution}} (delad med en pågående inspelning)`},testConnection:`Testa anslutning`,catalog:{spoolCatalog:`Rullkatalog`,spoolCatalogDescription:`Tomma rullvikter efter märke/typ. Används för automatisk viktsökning när rullar läggs till.`,searchCatalog:`Sök i katalogen...`,addNewEntry:`Lägg till ny post`,namePlaceholder:`Namn (t.ex. Bambu Lab - Plast)`,weight:`Vikt`,type:`Typ`,default:`Standard`,custom:`Anpassad`,noMatch:`Inga poster matchar din sökning`,empty:`Inga poster i katalogen`,deleteEntry:`Ta bort post`,deleteConfirm:`Är du säker på att du vill ta bort "{{name}}"?`,resetCatalog:`Återställ katalog`,resetConfirm:`Återställ katalog till standard? Detta kommer att ta bort alla anpassade poster.`,loadFailed:`Kunde inte ladda rullkatalogen`,nameWeightRequired:`Namn och vikt krävs`,entryAdded:`Post tillagd`,addFailed:`Kunde inte lägga till post`,entryUpdated:`Post uppdaterad`,updateFailed:`Kunde inte uppdatera post`,entryDeleted:`Post borttagen`,deleteFailed:`Kunde inte ta bort post`,resetSuccess:`Katalog återställd till standard`,resetFailed:`Kunde inte återställa katalog`,exported:`Exporterade {{count}} poster`,imported:`Importerade {{added}} poster ({{skipped}} hoppade över)`,importFailed:`Kunde inte importera: ogiltigt JSON-format`,exportTooltip:`Exportera katalog till JSON`,importTooltip:`Importera katalog från JSON`,resetTooltip:`Återställ till standard`,selectedCount:`{{count}} valda`,deleteSelected:`Ta bort valda`,bulkDeleteConfirm:`Är du säker på att du vill ta bort {{count}} poster?`,bulkDeleted:`Tog bort {{count}} poster`,bulkDeleteFailed:`Kunde inte ta bort poster`,material:`Material`,spoolWeight:`Rullvikt`,color:`Färg`,updateSpoolWeight:`Uppdatera rullvikt`,filamentUpdated:`Filament uppdaterat`,filamentUpdateFailed:`Kunde inte uppdatera filament`,filamentUpdateInvalid:`Ogiltig filamentdata`,keepExistingSpoolWeight:`Behåll tidigare vikt för befintliga rullar`,keepExistingSpoolWeightDesc:`Rullar som redan skapats med denna filamenttyp behåller den gamla taravikten. Nya rullar använder den uppdaterade vikten.`,applyToAllSpools:`Tillämpa på alla rullar`,applyToAllSpoolsDesc:`Alla viktberäkningar för denna filamenttyp använder omedelbart den nya taravikten.`},colorCatalog:{title:`Färgkatalog`,description:`Filamentfärger efter tillverkare/material. Används för automatisk färgsökning när rullar läggs till.`,searchColors:`Sök färger...`,allManufacturers:`Alla tillverkare`,addNewColor:`Lägg till ny färg`,manufacturer:`Tillverkare`,colorName:`Färgnamn`,hex:`Hex`,materialOptional:`Material (valfritt)`,showing:`Visar {{filtered}} av {{total}} färger`,noMatch:`Inga färger matchar din sökning`,empty:`Inga färger i katalogen`,deleteColor:`Ta bort färg`,deleteConfirm:`Är du säker på att du vill ta bort "{{name}}"?`,resetCatalog:`Återställ färgkatalog`,resetConfirm:`Återställ katalog till standard? Detta kommer att ta bort alla anpassade färger.`,sync:`Synkronisera`,starting:`Startar...`,syncTooltip:`Synkronisera från FilamentColors.xyz (2000+ färger, kan ta en minut)`,loadFailed:`Kunde inte ladda färgkatalogen`,fieldsRequired:`Tillverkare, färgnamn och hex-färg krävs`,colorAdded:`Färg tillagd`,addFailed:`Kunde inte lägga till färg`,colorUpdated:`Färg uppdaterad`,updateFailed:`Kunde inte uppdatera färg`,colorDeleted:`Färg borttagen`,deleteFailed:`Kunde inte ta bort färg`,resetSuccess:`Färgkatalog återställd till standard`,resetFailed:`Kunde inte återställa katalog`,syncUpToDate:`Redan uppdaterad ({{count}} färger kontrollerade)`,syncComplete:`Lade till {{added}} nya färger ({{skipped}} fanns redan)`,syncError:`Synkroniseringsfel`,syncFailed:`Kunde inte synkronisera från FilamentColors.xyz`,exported:`Exporterade {{count}} färger`,imported:`Importerade {{added}} färger ({{skipped}} hoppade över)`,importFailed:`Kunde inte importera: ogiltigt JSON-format`,selectedCount:`{{count}} valda`,deleteSelected:`Ta bort valda`,bulkDeleteConfirm:`Är du säker på att du vill ta bort {{count}} färger?`,bulkDeleted:`Tog bort {{count}} färger`,bulkDeleteFailed:`Kunde inte ta bort färger`},dateFormat:`Datumformat`,dateFormatUs:`US (MM/DD/ÅÅÅÅ)`,dateFormatEu:`EU (DD/MM/ÅÅÅÅ)`,dateFormatIso:`ISO (ÅÅÅÅ-MM-DD)`,timeFormat:`Tidsformat`,timeFormat12:`12-timmars (3:30 PM)`,timeFormat24:`24-timmars (15:30)`,defaultPrinter:`Standardskrivare`,defaultPrinterDescription:`Förvälj denna skrivare för uppladdningar, omutskrifter och andra operationer.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Använd sidofältet för att ordna om objekt, återställa synlighet och hantera anpassade länkar.`,setDefault:`Sätt som standard`,sidebarOrderSetDefaultHint:`Sätt som standard tillämpar den aktuella menyordningen på användare som inte har anpassat sin.`,sidebarDefaultSet:`Standardmenyordning har ställts in.`,sidebarDefaultCleared:`Standardmenyordning rensad.`,sidebarDefaultFailed:`Kunde inte ställa in standardmenyordning.`,reset:`Återställ`,darkMode:`Mörkt läge`,lightMode:`Ljust läge`,active:`(aktivt)`,background:`Bakgrund`,accent:`Accent`,style:`Stil`,bgNeutral:`Neutral`,bgWarm:`Varm`,bgCool:`Kall`,bgOled:`OLED Svart`,bgSlate:`Skifferblå`,bgForest:`Skogsgrön`,accentGreen:`Grön`,accentTeal:`Blågrön`,accentBlue:`Blå`,accentOrange:`Orange`,accentPurple:`Lila`,accentRed:`Röd`,styleClassic:`Klassisk`,styleGlow:`Sken`,styleVibrant:`Livfull`,themeToggleHint:`Växla mellan mörkt, ljust och systemläge med ikonen i sidomenyn.`,progressInTitle:`Utskriftsförlopp i flik`,progressInTitleDescription:`Visa den aktiva utskriftens procentförlopp och en ring i webbläsarfliken.`,autoArchivePrints:`Auto-arkivera utskrifter`,autoArchiveDescription:`Spara automatiskt 3MF-filer när utskrifter slutförs`,saveThumbnailsDescription:`Extrahera och spara förhandsvisningsbilder från 3MF-filer`,captureFinishPhotoDescription:`Ta ett foto från skrivarkameran när utskriften slutförs. Bambuddy spelar in en kort timelapse under utskriften så att fotot kan hämtas från ögonblicket innan byggplattan sänks; timelapse-filen behålls om du aktiverat timelapse för denna utskrift, annars tas den automatiskt bort efter att fotot tagits.`,finishPhotoRestorePlate:`Återställ platta för foto`,finishPhotoRestorePlateDescription:`Skrivaren sänker byggplattan cirka 100 mm när en utskrift slutförs, vilket lämnar den färdiga utskriften under kamerans bildruta. Bambuddy höjer tillbaka den precis ovanför det sista utskrivna skiktet, tar fotot och sänker den igen. Hoppas över när utskriftshöjden är okänd eller om ett annat jobb är köat.`,ffmpegNotInstalled:`ffmpeg är inte installerat`,ffmpegRequired:`Kamerainspelning kräver ffmpeg. Installera det via <brew>brew install ffmpeg</brew> (macOS) eller <apt>apt install ffmpeg</apt> (Linux).`,camera:`Kamera`,cameraViewMode:`Kameravy`,cameraOverlayDescription:`Kameran öppnas i en storleksändringsbart överlägg på huvudskärmen`,cameraWindowDescription:`Kameran öppnas i ett separat webbläsarfönster`,externalCamerasDescription:`Konfigurera externa kameror för att ersätta den inbyggda skrivarkameran. Stöder MJPEG-strömmar, RTSP, HTTP-ögonblicksbilder och USB-kameror (V4L2). När aktiverad används den externa kameran för live-vy och färdigbilder.`,cameraPlaceholderUsb:`Enhetssökväg (/dev/video0)`,cameraPlaceholderUrl:`Kamera-URL (rtsp://... eller http://...)`,cameraTypeMjpeg:`MJPEG-ström`,cameraTypeRtsp:`RTSP-ström`,cameraTypeSnapshot:`HTTP-ögonblicksbild`,cameraTypeUsb:`USB-kamera (V4L2)`,cameraSnapshotUrl:`Ögonblicksbild-URL (valfritt)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`Enkelbild-URL som används för notisminibilder, färdigbilder, layer-timelapse-bilder och plattdetektering. Timelapse och plattdetektering kräver varsin per-skrivare-växel — denna URL är bara bildkällan de använder när aktiva. Lämna tomt för att fånga från live-strömmen ovan. Användbart för go2rtc (/api/frame.jpeg) och IP-kameror med en dedikerad ögonblicksbild-ändpunkt.`,cameraRotation:`Rotation`,test:`Test`,connected:`Ansluten`,disconnected:`Frånkopplad`,currency:`Valuta`,defaultFilamentCost:`Standardfilamentkostnad (per kg)`,electricityCost:`Elkostnad per kWh`,energyDisplayMode:`Energivisningsläge`,energyModePrintDescription:`Instrumentpanelen visar summan av energin som använts under utskrifter`,energyModeTotalDescription:`Instrumentpanelen visar livstidsenergi från smarta kontakter`,fileManager:`Filhanterare`,createArchiveEntry:`Skapa arkivpost vid utskrift`,createArchiveEntryDescription:`När du skriver ut från Filhanteraren, skapa en arkivpost`,lowDiskSpaceWarning:`Varning för lågt diskutrymme`,lowDiskSpaceDescription:`Visa en varning när tillgängligt diskutrymme är under detta tröskelvärde`,printerFirmware:`Skrivarens firmware`,checkFirmwareDescription:`Kontrollera om det finns firmwareuppdateringar för skrivaren från Bambu Lab`,bambuddySoftware:`Bambuddy-programvara`,autoCheckDescription:`Sök automatiskt efter nya versioner vid start`,checkNow:`Sök nu`,updateAvailableVersion:`Uppdatering tillgänglig: v{{version}}`,releaseNotes:`Versionsinformation`,updateViaDocker:`Uppdatera via Docker Compose:`,composeDirectory:`Compose-katalog`,composeDirectoryHint:`Mappen som innehåller din docker-compose.yml. Lämna tomt för att utelämna cd.`,copyUpdateCommand:`Kopiera uppdateringskommando`,updateViaHomeAssistant:`Uppdateringar hanteras av Home Assistant Supervisor. Öppna Inställningar → Tillägg → Bambuddy i Home Assistant för att installera den nya versionen.`,updateViaWindowsInstaller:`Windows-installationer uppdateras genom att köra installationsprogrammet igen. Ladda ner den nya versionen nedan — din data, inställningar och skrivare bevaras.`,downloadWindowsInstaller:`Ladda ner installationsprogram för v{{version}}`,installUpdate:`Installera uppdatering`,latestVersionRunning:`Du kör den senaste versionen`,failedToCheckUpdates:`Kunde inte kontrollera uppdateringar: {{error}}`,backupRestore:`Säkerhetskopia och återställning`,backupRestoreDescription:`Exportera/importera inställningar och konfigurera GitHub-säkerhetskopia`,goToBackup:`Gå till säkerhetskopia`,externalUrl:`Extern URL`,externalUrlDescription:`Den externa URL:en där Bambuddy kan nås. Används för notisbilder och externa integrationer.`,bambuddyUrl:`Bambuddy-URL`,externalUrlHint:`Inkludera protokoll och port (t.ex. http://192.168.1.100:8000)`,ftpRetry:`FTP-omförsök`,ftpRetryDescription:`Försök igen med FTP-operationer när skrivarens WiFi är opålitlig. Gäller för 3MF-nedladdningar, utskriftsuppladdningar, timelapse-nedladdningar och firmwareuppdateringar.`,autoRetryDescription:`Försök automatiskt igen med misslyckade FTP-operationer`,retryAttempts:`Försök igen`,retryDelay:`Fördröjning mellan försök`,connectionTimeout:`Anslutningstimeout`,time_one:`{{count}} gång`,time_other:`{{count}} gånger`,second_one:`{{count}} sekund`,second_other:`{{count}} sekunder`,nSeconds:`{{count}} sekunder`,increaseForWeakWifi:`Öka för skrivare med svag WiFi`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Anslut till Home Assistant för att styra smarta kontakter via HA:s REST API. Stöder switch, light, input_boolean och script-entiteter.`,homeAssistantUrl:`Home Assistant-URL`,longLivedAccessToken:`Långlivad åtkomst-token`,haTokenHint:`Skapa en token i HA: Profil → Långlivade åtkomst-tokens → Skapa token`,connectionSuccessful:`Anslutning lyckades`,connectionFailed:`Anslutning misslyckades`,haConnectionSuccess:`Anslöt framgångsrikt till Home Assistant.`,haConnectionFailed:`Kunde inte ansluta till Home Assistant.`,mqttPublishing:`MQTT-publicering`,mqttDescription:`Publicera Bambuddy-händelser till en extern MQTT-mäklare för integration med Node-RED, Home Assistant och andra automatiseringssystem.`,mqttEnableDescription:`Publicera händelser till extern MQTT-mäklare`,brokerHostname:`Mäklarens värdnamn`,port:`Port`,usernameOptional:`Användarnamn (valfritt)`,passwordOptional:`Lösenord (valfritt)`,topicPrefix:`Ämnesprefix`,topicPrefixHint:`Ämnen kommer att vara: {{prefix}}/printers/<serial>/status, etc.`,prometheusMetrics:`Prometheus-mätvärden`,prometheusEndpointDescription:`Exponera skrivarmätvärden på <code>/api/v1/metrics</code> för Prometheus/Grafana-övervakning.`,bearerTokenOptional:`Bärar-token (valfritt)`,bearerTokenHint:`Om inställt måste förfrågningar inkludera <code>Authorization: Bearer <token></code>`,metricsConnectionStatus:`Anslutningsstatus`,metricsPrinterState:`Skrivarstatus (inaktiv/skriver ut/etc)`,metricsPrintProgress:`Utskriftsförlopp 0-100%`,metricsBedTemp:`Byggplattstemperatur`,metricsNozzleTemp:`Munstyckstemperatur`,metricsPrintsTotal:`Totala utskrifter efter resultat`,metricsMore:`...och mer (skikt, fläktar, kö, filamentanvändning)`,smartPlugsDescription:`Anslut smarta kontakter (Tasmota eller Home Assistant) för att automatisera strömkontroll och spåra energiförbrukning för dina skrivare.`,allOn:`Sätt på alla`,allOff:`Stäng av alla`,addSmartPlug:`Lägg till smart kontakt`,energySummary:`Energisammanfattning`,currentPower:`Aktuell effekt`,plugsOnline:`{{reachable}}/{{total}} kontakter online`,today:`Idag`,yesterday:`Igår`,total:`Totalt`,enablePlugsForSummary:`Aktivera kontakter för att se energisammanfattning`,addNotificationProvider:`Lägg till`,systemBadge:`(System)`,creating:`Skapar...`,changing:`Ändrar...`,deleteUserAndItems:`Ta bort användare OCH deras objekt`,deleteUserKeepItems:`Ta bort användare, behåll objekt (blir ägarlösa)`,ok:`OK`,twoFa:{totpTitle:`Autentiseringsapp (TOTP)`,totpDesc:`Använd en autentiseringsapp som Google Authenticator, Aegis eller Authy.`,emailOtpTitle:`E-post OTP`,emailOtpDesc:`Skicka en engångskod till {{email}} när du loggar in.`,emailOtpNoEmail:`Lägg till en e-postadress till ditt konto för att aktivera denna metod.`,addEmailFirst:`Ditt konto har ingen e-postadress. Be en admin att lägga till en innan du aktiverar e-post OTP.`,setupTotp:`Ställ in autentiseringsapp`,setupAuthApp:`Ställ in autentiseringsapp`,setupInstructions:`Skanna QR-koden nedan med din autentiseringsapp, bekräfta sedan med en kod.`,manualEntry:`Kan du inte skanna? Ange denna hemlighet manuellt:`,scannedContinue:`Jag har skannat koden — fortsätt`,enterCodeToConfirm:`Ange den 6-siffriga koden från din autentiseringsapp för att bekräfta konfigurationen.`,activate:`Aktivera`,disableTotp:`Inaktivera autentiseringsapp`,disableConfirmHint:`Ange en giltig TOTP-kod eller en reservkod för att inaktivera autentiseraren.`,totpDisabled:`Autentiseringsapp inaktiverad.`,emailOtpEnabled:`E-post OTP aktiverad.`,emailOtpDisabled:`E-post OTP inaktiverad.`,smtpRequired:`Konfigurera och testa SMTP-inställningar först.`,invalidCode:`Ogiltig kod. Försök igen.`,enableEmailOtp:`Aktivera e-post OTP`,disableEmailOtp:`Inaktivera e-post OTP`,emailSetupEnterCode:`En verifieringskod har skickats till din e-postadress. Ange den nedan för att bekräfta att du äger denna inkorg.`,verifyAndEnable:`Verifiera och aktivera`,emailDisablePasswordHint:`Ange ditt kontolösenord för att bekräfta inaktiveringen av e-post OTP.`,passwordPlaceholder:`Ange ditt lösenord`,backupCodesTitle:`Spara dina reservkoder`,backupCodesWarning:`Spara dessa koder på en säker plats. Varje kod kan endast användas en gång och de kommer inte att visas igen.`,backupCodesRemaining:`{{count}} reservkoder kvar`,savedCodes:`Jag har sparat mina koder`,regenBackup:`Regenerera reservkoder`,regenBackupHint:`Ange din nuvarande TOTP-kod för att generera 10 nya reservkoder. Alla befintliga reservkoder kommer att ogiltigförklaras.`,newBackupCodes:`Nya reservkoder`,linkedAccounts:`Länkade SSO-konton`,linkedAccountsDesc:`Dessa externa identitetsleverantörer är länkade till ditt konto.`,oidcUnlinked:`Konto bortkopplat.`},sessionPolicy:{title:`Sessionspolicy`,description:`Maximal sessionstid för nya användarinloggningar. Redan utfärdade tokens behåller sin ursprungliga utgångstid.`,preset24h:`24 timmar`,preset7d:`7 dagar`,preset30d:`30 dagar`,customHoursLabel:`Anpassad sessionstid i timmar`,hoursSuffix:`timmar`,warning:`Längre sessioner minskar skyddet mot automatisk utloggning. Rekommenderas endast för betrodda enanvändarutplaceringar.`},oidc:{title:`SSO / OIDC-leverantörer`,desc:`Konfigurera OpenID Connect-leverantörer för att tillåta enstegsinloggning via externa identitetsleverantörer.`,addProvider:`Lägg till leverantör`,newProvider:`Ny leverantör`,empty:`Inga OIDC-leverantörer konfigurerade än.`,created:`Leverantör skapad.`,updated:`Leverantör uppdaterad.`,deleted:`Leverantör borttagen.`,refreshIcon:`Uppdatera ikon`,removeIcon:`Ta bort ikon`,iconRefreshed:`Ikon uppdaterad.`,iconRemoved:`Ikon borttagen.`,iconFetchFailed:`Kunde inte hämta ikon från leverantörs-URL:en.`,deleteTitle:`Ta bort leverantör`,deleteMessage:`Ta bort "{{name}}"? Alla länkade användarkonton kommer att kopplas från.`,form:{name:`Visningsnamn`,issuerUrl:`Utgivar-URL`,clientId:`Klient-ID`,clientSecret:`Klienthemlighet`,scopes:`Omfång`,iconUrl:`Ikon-URL (valfritt)`,enabled:`Aktiverad`,autoCreate:`Auto-skapa användare`,autoCreateDesc:`Skapa automatiskt ett lokalt konto vid första inloggning.`,autoLink:`Auto-länka befintliga konton`,autoLinkDesc:`Länka befintliga lokala konton genom att matcha e-post vid första inloggning.`,secretHint:`lämna tomt för att behålla nuvarande`,secretPlaceholder:`ny hemlighet`,emailClaim:`E-postanspråk`,emailClaimDesc:`JWT-anspråk som används som e-postidentitet. Använd "preferred_username" eller "upn" för Azure Entra ID (som inte skickar email_verified). Använd endast betrodda anspråksnamn.`,emailClaimPlaceholder:`email`,emailClaimCustomClaimAutoLinkWarning:`Anpassade anspråk är säkra för auto-länk endast när värdet administreras av hyresvärden (t.ex. Azure Entra ID upn / preferred_username). Aktivera inte auto-länk om din IdP tillåter användare att självhävda detta anspråk.`,requireEmailVerified:`Kräv verifierad e-post`,requireEmailVerifiedDesc:`Acceptera endast e-postanspråket när leverantören markerar det som verifierat.`,requireEmailVerifiedWarning:`Varning: e-post kommer att accepteras även utan verifiering. Använd endast med betrodda leverantörer.`,requireEmailVerifiedAutoLink:`Inaktivera auto-länk först för att ändra denna inställning.`,defaultGroup:`Standardgrupp`,defaultGroupDesc:`Grupp som tilldelas auto-skapade användare. Faller tillbaka till Åskådare om inte inställt.`,defaultGroupViewersFallback:`Åskådare (standard)`,autologin:`Autologin`,autologinDesc:`Omdirigera icke autentiserade besökare direkt till denna leverantör. Endast en leverantör kan ha denna flagga.`}},encryption:{title:`MFA-krypteringsstatus`,enabledFromEnv:`Kryptering i vila aktiverad (nyckel från MFA_ENCRYPTION_KEY-miljövariabel)`,enabledFromFile:`Kryptering i vila aktiverad (nyckel laddad från datakatalog)`,enabledGenerated:`Kryptering i vila aktiverad med auto-genererad nyckel`,notConfigured:`Kryptering i vila ej konfigurerad`,notConfiguredDesc:`TOTP-hemligheter och OIDC client_secrets lagras i klartext. Sätt MFA_ENCRYPTION_KEY eller starta om Bambuddy med en skrivbar datakatalog för att auto-generera en.`,allEncrypted:`Alla MFA-hemligheter är krypterade i vila.`,legacyRowsLabel:`Äldre klartextrader`,encryptedRowsLabel:`Krypterade rader`,legacyRowsWarning:`{{count}} äldre klartextrad(er) upptäckta. Spara om OIDC-leverantören eller registrera om användarens autentiseringsapp för att migrera till krypterad lagring.`,backupHint:`Den auto-genererade nyckeln lagras på DATA_DIR/.mfa_encryption_key och ingår i lokala säkerhetskopior. Håll dina säkerhetskopior säkra eller sätt MFA_ENCRYPTION_KEY explicit.`,decryptionBrokenTitle:`Krypteringsnyckel saknas`,decryptionBrokenError:`{{count}} krypterad(e) post(er) kan inte dekrypteras eftersom krypteringsnyckeln inte längre är tillgänglig. Återställ den tidigare MFA_ENCRYPTION_KEY eller DATA_DIR/.mfa_encryption_key för att återställa.`,migrationErrorWarning:`{{count}} äldre rad(er) kunde inte krypteras om vid start. Kontrollera serverloggar och starta om Bambuddy för att försöka igen.`},pipelineLimits:{title:`Gränser för slicer-pipeline`,maxCopiesLabel:`Max kopior per körning`,maxCopiesDesc:`Övre gräns för antalet kopior som operatörer kan begära vid körning av en pipeline. Server-sidans hårda gräns är 1000.`},pipelines:{title:`Slicer-pipelines`,subtitle:`Återanvändbara inställningspaket (skrivare + process + filament + byggplattstyp). Spara en från slicing-dialogrutan och använd den med ett klick på nästa fil.`,loading:`Laddar pipelines...`,loadError:`Kunde inte ladda pipelines.`,confirmDelete:`Ta bort denna pipeline? Detta kan inte ångras.`,staleWarning:`En eller flera refererade inställningar finns inte längre. Spara om denna pipeline från slicing-dialogrutan för att åtgärda.`,empty:{title:`Inga pipelines än.`,howto:`Öppna slicing-dialogrutan för någon fil, välj din skrivare/process/filament/byggplattstyp, klicka sedan på "Spara som pipeline". Dina sparade pipelines kommer att visas här.`},field:{name:`Pipeline-namn`,description:`Beskrivning`,targetPrinter:`Målskrivare`,noTarget:`— Inget mål —`,targetKind:`Måltyp`,targetKindSpecific:`Specifik skrivare`,targetKindClass:`Skrivarklass`,targetModelClass:`Skrivarmodell`,fanoutStrategy:`Fördelningsstrategi`,fanout:{max_parallel:`Max parallell — fördela över alla lediga matchande skrivare`,round_robin:`Rotationskö — cykla genom berättigade skrivare`,fill_one_first:`Fyll en först — fäst alla kopior till en skrivare`},fanoutShort:{max_parallel:`parallell`,round_robin:`rotationskö`,fill_one_first:`fyll en först`}},action:{save:`Spara`,cancel:`Avbryt`,rename:`Döp om`,delete:`Ta bort`},slot:{printer:`Skrivare`,process:`Process`,filament:`Filament`,filamentN:`Filament {{n}}`,filamentAll:`Alla {{n}} fack`,bed:`Byggplatta`},group:{profiles:`Profiler`,filaments:`Filament`},searchPlaceholder:`Sök pipelines...`,filterTargetType:`Filtrera efter måltyp`,filterTarget:`Filtrera efter mål`,filter:{all:`Alla mål`,noTarget:`Inget mål inställt`,count:`{{shown}} / {{total}}`,noMatches:`Inga pipelines matchar de aktuella filtren.`},toast:{saved:`Pipeline sparad`,saveFailed:`Kunde inte spara`,deleted:`Pipeline borttagen`,deleteFailed:`Kunde inte ta bort`},noTargetHint:`Sätt en målskrivare för att köra denna`,noTargetWarning:`Sätt en målskrivare innan du kör denna pipeline.`,runs:{lastRun:`Senaste körning`,status:{queued:`köad`,slicing:`slicar`,dispatching:`skickar`,in_progress:`skriver ut`,completed:`slutförd`,failed:`misslyckad`,partial_failure:`delvis misslyckad`,cancelled:`avbruten`}}}},notification:{printStarted:{title:`Utskrift startad`,body:`{{printer}}: {{filename}} har börjat skrivas ut`},printCompleted:{title:`Utskrift slutförd`,body:`{{printer}}: {{filename}} slutfördes`},printFailed:{title:`Utskrift misslyckades`,body:`{{printer}}: {{filename}} misslyckades`},printStopped:{title:`Utskrift stoppad`,body:`{{printer}}: {{filename}} stoppades`},printProgress:{title:`Utskriftsförlopp`,body:`{{printer}}: {{filename}} är {{percent}}% klar`},printerOffline:{title:`Skrivare offline`,body:`{{printer}} är offline`},printerError:{title:`Skrivarfel`,body:`{{printer}}: {{error}}`},filamentLow:{title:`Lågt filament`,body:`{{printer}}: Filamentet håller på att ta slut`},maintenanceDue:{title:`Underhåll uteblivet`,body:`{{printer}}: {{items}} behöver uppmärksamhet`}},errors:{generic:`Något gick fel`,networkError:`Nätverksfel. Kontrollera din anslutning.`,notFound:`Hittades ej`,unauthorized:`Ej behörig`,serverError:`Serverfel`,validationError:`Kontrollera din inmatning`,printerConnectionFailed:`Kunde inte ansluta till skrivare`,saveFailed:`Kunde inte spara ändringar`,deleteFailed:`Kunde inte ta bort`,loadFailed:`Kunde inte ladda data`},hmsErrors:{title:`Fel - {{name}}`,noErrors:`Inga fel`,viewOnWiki:`Visa på Bambu Lab Wiki`,mqttVerifyFailedRemedy:`Aktivera utvecklarläge på skrivaren, starta om skrivaren och starta sedan jobbet igen.`,unknownCode:`Okänd HMS-kod — se Bambu Lab wiki för detaljer.`,clearInstructions:`Rensa fel på skrivaren för att avfärda dem här.`,clearErrors:`Rensa fel`,clearSuccess:`HMS-fel rensade`,clearFailed:`Kunde inte rensa HMS-fel`,actionSuccess:`Åtgärd skickad till skrivare`,actionFailed:`Kunde inte skicka åtgärd`,runoutExpectedSlot:`Filamentet tog slut i {{ranOut}}. Skrivaren väntar nu på kompatibelt filament i {{expected}}. Sätt in en rulle i {{expected}} och välj sedan Försök igen.`,runoutExpectedSlotOnly:`Skrivaren väntar på kompatibelt filament i {{expected}}. Sätt in en rulle där och välj sedan Försök igen.`,runoutSlotUnknown:`Filament tog slut och utskriften är pausad. Bambuddy kunde inte avgöra vilket fack skrivaren nu väntar på — kontrollera skrivarens skärm för det begärda facket.`,actions:{RESUME_PRINTING:`Fortsätt utskrift`,RESUME_PRINTING_DEFECTS:`Fortsätt (defekter acceptabla)`,RESUME_PRINTING_PROBELM_SOLVED:`Fortsätt (problem löst)`,STOP_PRINTING:`Stoppa utskrift`,CHECK_ASSISTANT:`Kontrollera assistent`,FILAMENT_EXTRUDED:`Filament extruderat, fortsätt`,RETRY_FILAMENT_EXTRUDED:`Inte extruderat än, försök igen`,CONTINUE:`Klar, fortsätt`,LOAD_VIRTUAL_TRAY:`Ladda filament`,OK_BUTTON:`OK`,FILAMENT_LOAD_RESUME:`Filament laddat, fortsätt`,JUMP_TO_LIVEVIEW:`Visa livevy`,NO_REMINDER_NEXT_TIME:`Ingen påminnelse nästa gång`,REFRESH_NOZZLE:`Kontrollera om`,IGNORE_NO_REMINDER_NEXT_TIME:`Ignorera. Ingen påminnelse nästa gång`,IGNORE_RESUME:`Ignorera och fortsätt`,PROBLEM_SOLVED_RESUME:`Problemet löst och fortsätt`,TURN_OFF_FIRE_ALARM:`Förstått, stäng av brandlarmet.`,RETRY_PROBLEM_SOLVED:`Försök igen (problem löst)`,CANCLE:`Avbryt`,STOP_DRYING:`Stoppa torkning`,PROCEED:`Fortsätt`,OK_JUMP_RACK:`OK`,ABORT:`Avbryt`,DISABLE_PURIFICATION:`Inaktivera rening för denna utskrift`,DONT_REMIND_NEXT_TIME:`Påminn mig inte nästa gång`,DBL_CHECK_CANCEL:`Avbryt`,DBL_CHECK_DONE:`Klar`,DBL_CHECK_RETRY:`Försök igen`,DBL_CHECK_RESUME:`Fortsätt`,DBL_CHECK_OK:`Bekräfta`,REMOVE_CLOSE_BTN:`Stäng`}},mqttDebug:{title:`MQTT-felsökningslogg`,searchPlaceholder:`Sök ämne eller nyttolast...`,noMessages:`Inga meddelanden loggade än`,startLoggingHint:`Klicka på "Starta loggning" för att börja fånga MQTT-meddelanden`,noMessagesMatch:`Inga meddelanden matchar ditt filter`,adjustFilterHint:`Försök justera din sökning eller filterkriterier`,incoming:`Inkommande`,outgoing:`Utgående`,loggingStopped:`Loggning stoppad`,loggingActive:`Loggning aktiv - meddelanden kommer att uppdateras automatiskt`,startLogging:`Starta loggning`,stopLogging:`Stoppa loggning`,clearLog:`Rensa logg`,topic:`Ämne`,timestamp:`Tidsstämpel`,direction:`Riktning`,all:`Alla`},printerFiles:{zipStarted_one:`Startade ZIP-nedladdning för {{count}} fil`,zipStarted_other:`Startade ZIP-nedladdning för {{count}} files`,zipPartial:`Startade ZIP-nedladdning med {{successful}} av {{total}} filer; resten kunde inte hämtas`,downloadFailed:`Nedladdning misslyckades: {{error}}`,unknownError:`Okänt fel`,shiftSelectHint:`Skift-klicka för att välja ett intervall`,selectFile:`Markera {{name}}`,deselectFile:`Avmarkera {{name}}`,title:`Filhanterare`,storageUsed:`Använt:`,storageFree:`Ledigt:`,filterPlaceholder:`Filtrera filer...`,deleteButton:`Ta bort`,deleteFiles:`Ta bort {{count}} filer`,deleteFileConfirm:`Ta bort "{{name}}"? Detta kan inte ångras.`,deleteFilesConfirm:`Ta bort {{count}} markerade filer? Detta kan inte ångras.`,noFiles:`Inga filer på skrivaren`,printerUnavailable:`Skrivarfiltjänsten är inte tillgänglig. Försök igen när skrivaren är tillgänglig.`,loadingFiles:`Laddar filer...`,failedToLoad:`Kunde inte ladda filer`,toast:{filesDeleted:`Tog bort {{count}} fil(er)`,deleteFailed:`Kunde inte ta bort: {{error}}`}},confirm:{delete:`Är du säker på att du vill ta bort detta?`,unsavedChanges:`Du har osparade ändringar. Är du säker på att du vill lämna?`,clearQueue:`Är du säker på att du vill rensa kön?`},login:{title:`Bambuddy-inloggning`,subtitle:`Logga in på ditt konto`,username:`Användarnamn`,usernamePlaceholder:`Ange ditt användarnamn`,usernameOrEmail:`Användarnamn eller e-post`,usernameOrEmailPlaceholder:`Användarnamn eller @ e-post`,password:`Lösenord`,passwordPlaceholder:`Ange ditt lösenord`,signIn:`Logga in`,signingIn:`Loggar in...`,rememberMe:`Kom ihåg mig`,forgotPassword:`Glömt ditt lösenord?`,autologinFailed:`Automatisk SSO-inloggning misslyckades. Välj en leverantör nedan för att fortsätta.`,localDisabledNotice:`Lokal inloggning är inaktiverad. Använd en av SSO-leverantörerna nedan.`,loginSuccess:`Inloggad`,loginFailed:`Inloggning misslyckades`,enterCredentials:`Ange användarnamn och lösenord`,enterEmail:`Ange din e-postadress`,oidcLoginFailed:`OIDC-inloggning misslyckades`,oidcErrors:{providerError:`Identitetsleverantören returnerade ett fel`,missingParameters:`OIDC-återanrop saknar obligatoriska parametrar`,invalidState:`OIDC-status är ogiltig eller har redan använts`,stateExpired:`OIDC-inloggningssession har löpt ut — försök igen`,providerNotFound:`OIDC-leverantör hittades ej`,discoveryFailed:`Kunde inte hämta OIDC-upptäcktsdokument`,invalidDiscovery:`OIDC-upptäcktsdokument är ogiltigt`,networkError:`Nätverksfel under OIDC-tokenutbyte`,badResponse:`Oväntat svar under OIDC-tokenutbyte`,noIdToken:`OIDC-leverantören returnerade ingen ID-token`,validationFailed:`OIDC-tokenvalidering misslyckades`,nonceMismatch:`OIDC-nonce-felmatchning — möjlig replay-attack`,missingSubClaim:`OIDC-token saknar sub-anspråk`,noLinkedAccount:`Ingen lokal användare är länkad till denna OIDC-identitet`,accountInactive:`Ditt konto är inaktivt`,userResolutionFailed:`Kunde inte lösa ditt konto`,internalError:`Ett internt fel uppstod under OIDC-inloggning`,tokenExchangeFailed:`OIDC-tokenutbyte misslyckades`},forgotPasswordTitle:`Glömt lösenord`,forgotPasswordMessage:`Om du har glömt ditt lösenord, kontakta din systemadministratör för att återställa det.`,forgotPasswordEmailMessage:`Ange din e-postadress så skickar vi ett nytt lösenord till dig.`,emailAddress:`E-postadress`,emailPlaceholder:`din.e-post@example.com`,cancel:`Avbryt`,sending:`Skickar...`,sendResetEmail:`Skicka återställnings-e-post`,howToReset:`Så här återställer du ditt lösenord:`,resetStep1:`Kontakta din Bambuddy-administratör`,resetStep2:`Be dem återställa ditt lösenord i Användarhantering`,resetStep3:`De kan sätta ett nytt tillfälligt lösenord åt dig`,resetStep4:`Logga in med det nya lösenordet och ändra det under Inställningar`,gotIt:`Förstått`,resetPassword:{title:`Sätt nytt lösenord`,subtitle:`Ange och bekräfta ditt nya lösenord nedan.`,newPassword:`Nytt lösenord`,newPasswordPlaceholder:`Minst 8 tecken`,confirmPassword:`Bekräfta lösenord`,confirmPasswordPlaceholder:`Upprepa nytt lösenord`,saving:`Sparar…`,submit:`Sätt nytt lösenord`,backToLogin:`Tillbaka till inloggning`,passwordsDoNotMatch:`Lösenorden matchar inte`,passwordTooShort:`Lösenordet måste vara minst 8 tecken`,resetFailed:`Lösenordsåterställning misslyckades. Länken kan ha löpt ut.`},twoFA:{title:`Tvåfaktorsautentisering`,subtitle:`Ditt konto är skyddat med 2FA. Ange verifieringskoden nedan.`,methodAuthenticator:`Autentiseringsapp`,methodEmail:`E-postkod`,methodBackup:`Reservkod`,instructionsTotp:`Öppna din autentiseringsapp och ange den 6-siffriga koden för Bambuddy.`,instructionsEmail:`En 6-siffrig kod har skickats till din e-postadress. Den går ut om 10 minuter.`,instructionsEmailNotSent:`Klicka på knappen nedan för att ta emot en verifieringskod via e-post.`,instructionsBackup:`Ange en av dina 8-teckens reservåterställningskoder. Varje kod kan endast användas en gång.`,sendCodeButton:`Skicka kod via e-post`,sendingCode:`Skickar...`,resendCode:`Skicka kod igen`,codeLabel:`Verifieringskod`,backupCodeLabel:`Reservkod`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Verifiera`,verifyingButton:`Verifierar...`,backToLogin:`← Tillbaka till inloggning`,orContinueWith:`eller fortsätt med`,signInWith:`Logga in med {{provider}}`,enterCode:`Ange verifieringskoden`,sendCodeFailed:`Kunde inte skicka verifieringskod`,invalidCode:`Ogiltig kod. Försök igen.`}},setup:{title:`Bambuddy-inställning`,subtitle:`Konfigurera autentisering för din Bambuddy-instans`,enableAuth:`Aktivera autentisering`,adminAccount:`Admin-konto`,adminAccountDesc:`Om admin-användare redan finns kommer autentisering att aktiveras med de befintliga admin-kontona. Lämna fälten nedan tomma för att använda befintliga admins, eller ange nya inloggningsuppgifter för att skapa en ny admin-användare.`,adminUsername:`Admin-användarnamn`,adminPassword:`Admin-lösenord`,optionalIfAdminExists:`(valfritt om admin-användare finns)`,adminUsernamePlaceholder:`Ange admin-användarnamn (valfritt)`,adminPasswordPlaceholder:`Ange admin-lösenord (valfritt)`,confirmPassword:`Bekräfta lösenord`,confirmPasswordPlaceholder:`Bekräfta admin-lösenord`,settingUp:`Ställer in...`,completeSetup:`Slutför inställning`,toast:{authEnabledAdminCreated:`Autentisering aktiverad och admin-användare skapad`,authEnabledExistingAdmins:`Autentisering aktiverad med befintliga admin-användare`,setupCompleted:`Inställning slutförd`,enterBothCredentials:`Ange både admin-användarnamn och lösenord, eller lämna båda tomma för att använda befintliga admin-användare`,passwordsDoNotMatch:`Lösenorden matchar ej`,passwordTooShort:`Lösenordet måste vara minst 6 tecken`}},changePassword:{title:`Ändra lösenord`,currentPassword:`Nuvarande lösenord`,currentPasswordPlaceholder:`Ange nuvarande lösenord`,newPassword:`Nytt lösenord`,newPasswordPlaceholder:`Ange nytt lösenord (minst 6 tecken)`,confirmPassword:`Bekräfta nytt lösenord`,confirmPasswordPlaceholder:`Bekräfta nytt lösenord`,passwordsDoNotMatch:`Lösenorden matchar ej`,passwordTooShort:`Lösenordet måste vara minst 6 tecken`,changing:`Ändrar...`,success:`Lösenord ändrat`,failed:`Kunde inte ändra lösenord`},plateAlert:{title:`Utskrift pausad!`,message:`Objekt upptäckta på byggplattan. Utskriften har pausats automatiskt. Töm plattan och fortsätt utskriften.`,understand:`Jag förstår`},camera:{title:`Kameravy`,invalidPrinterId:`Ogiltigt skrivar-ID`,live:`Live`,snapshot:`Ögonblicksbild`,restartStream:`Starta om strömmen`,refreshSnapshot:`Uppdatera ögonblicksbild`,fullscreen:`Helskärm`,exitFullscreen:`Avsluta helskärm`,connectingToCamera:`Ansluter till kamera...`,capturingSnapshot:`Fångar ögonblicksbild...`,connectionLost:`Anslutning tappades`,connectionFailed:`Kunde inte ansluta till kamera`,reconnecting:`Återansluter om {{countdown}}s... (försök {{attempt}}/{{max}})`,reconnectNow:`Återanslut nu`,cameraUnavailable:`Kamera otillgänglig`,cameraUnavailableDesc:`Se till att skrivaren är påslagen och ansluten.`,noCamera:`Ingen kamera tillgänglig`,retry:`Försök igen`,cameraStream:`Kameraström`,zoomOut:`Zooma ut`,zoomIn:`Zooma in`,resetZoom:`Återställ zoom`,recording:`Spelar in`,startRecording:`Starta inspelning`,stopRecording:`Stoppa inspelning`,chamberLight:`Växla kammarljus`,unavailable:`Kamera ej tillgänglig`,diagnose:{button:`Diagnostisera`,modalTitle:`Kameradiagnostik`,running:`Kör diagnostik...`,runFailed:`Kunde inte köra diagnostik: {{error}}`,retry:`Kör igen`,stage:{tcp_reachable:`Nätverksåtkomlighet`,first_frame:`Bildtagning`,live_stream_active:`Liveström aktiv`},summary:{all_ok:`Kameran fungerar. Diagnostiken slutförde alla steg.`,live_stream_active_healthy:`Kameran strömmar för närvarande med nya bilder — ingen test nödvändig.`,printer_unreachable:`Skrivaren är ej nåbar. Kontrollera IP-adress, nätverksanslutning och att skrivaren är påslagen.`,camera_port_closed:`Skrivaren är nåbar men kameraporten är stängd. Se till att LAN-läge och utvecklarläge är aktiverade i skrivarinställningarna.`,no_frame:`Ansluten till kameran men inga bilder togs emot. Försök igen eller kontrollera att kameran är aktiverad i skrivarinställningarna.`,unknown_failure:`Kameradiagnostik misslyckades av okänd anledning. Kontrollera supportloggen för detaljer.`},meta:{protocol:`Protokoll`,port:`Port`,profile:`Profil`}}},groups:{title:`Grupphantering`,subtitle:`Hantera behörighetsgrupper för åtkomstkontroll`,backToSettings:`Tillbaka till inställningar`,createGroup:`Skapa grupp`,noPermission:`Du har inte behörighet att komma åt denna sida.`,system:`System`,noDescription:`Ingen beskrivning`,usersCount:`{{count}} användare`,permissionsCount:`{{count}} behörigheter`,edit:`Redigera`,delete:`Ta bort`,toast:{created:`Grupp skapad`,updated:`Grupp uppdaterad`,deleted:`Grupp borttagen`,enterGroupName:`Ange ett gruppnamn`},modal:{editGroup:`Redigera grupp`,createGroup:`Skapa grupp`,cancel:`Avbryt`,saving:`Sparar...`,creating:`Skapar...`,saveChanges:`Spara ändringar`},form:{groupName:`Gruppnamn`,groupNamePlaceholder:`Ange gruppnamn`,systemGroupWarning:`Systemgruppnamn kan inte ändras`,description:`Beskrivning`,descriptionPlaceholder:`Ange beskrivning (valfritt)`,permissions:`Behörigheter ({{count}} valda)`},deleteModal:{title:`Ta bort grupp`,message:`Är du säker på att du vill ta bort denna grupp? Användare i denna grupp kommer att förlora dessa behörigheter.`,confirm:`Ta bort grupp`},editor:{title:`Redigera grupp`,createTitle:`Skapa grupp`,search:`Sök behörigheter...`,selectAll:`Markera alla`,clearAll:`Avmarkera alla`,permissionsSelected:`{{count}} valda`,noResults:`Inga behörigheter matchar din sökning`,websocketHint:`Krävs för liveuppdateringar. Utan det faller gränssnittet tillbaka på periodisk avfrågning.`}},users:{title:`Användarhantering`,subtitle:`Hantera användare och deras åtkomst till din Bambuddy-instans`,backToSettings:`Tillbaka till inställningar`,createUser:`Skapa användare`,noPermission:`Du har inte behörighet att komma åt denna sida.`,admin:`Admin`,noGroups:`Inga grupper`,active:`Aktiv`,inactive:`Inaktiv`,edit:`Redigera`,delete:`Ta bort`,system:`System`,noGroupsAvailable:`Inga grupper tillgängliga`,table:{username:`Användarnamn`,groups:`Grupper`,status:`Status`,actions:`Åtgärder`},toast:{created:`Användare skapad`,updated:`Användare uppdaterad`,deleted:`Användare borttagen`,fillRequired:`Fyll i alla obligatoriska fält`,passwordsDoNotMatch:`Lösenorden matchar ej`,passwordTooShort:`Lösenordet måste vara minst 6 tecken`,ldapProvisioned:`LDAP-användare "{{username}}" skapad`},modal:{createUser:`Skapa användare`,editUser:`Redigera användare`,cancel:`Avbryt`,creating:`Skapar...`,saving:`Sparar...`,saveChanges:`Spara ändringar`,advancedAuthSubtitle:`med avancerad autentisering`,tabsAriaLabel:`Användarkälla`,localTab:`Lokal`,ldapTab:`LDAP`,ldapSearchLabel:`Sök katalog`,ldapSearchPlaceholder:`Ange användarnamn, namn eller e-post...`,ldapMinChars:`Ange minst 2 tecken för att söka`,ldapTypeToSearch:`Börja skriva för att söka i LDAP-katalogen`,ldapSearching:`Söker i katalog...`,ldapNoResults:`Inga matchande användare i katalogen`,ldapSearchError:`Katalogsökning misslyckades. Kontrollera LDAP-serverstatus.`,ldapAlreadyProvisioned:`Redan skapad`,ldapSelectedLabel:`Valda`,ldapProvision:`Skapa användare`,ldapProvisioning:`Skapar...`,ldapErrorProvision:`Kunde inte skapa användare. Kontrollera LDAP-serverstatus och försök igen.`},form:{username:`Användarnamn`,usernamePlaceholder:`Ange användarnamn`,email:`E-post`,emailPlaceholder:`användare@example.com`,password:`Lösenord`,passwordPlaceholder:`Ange lösenord`,confirmPassword:`Bekräfta lösenord`,confirmPasswordPlaceholder:`Bekräfta lösenord`,newPasswordPlaceholder:`Ange nytt lösenord`,confirmNewPasswordPlaceholder:`Bekräfta nytt lösenord`,leaveBlankToKeep:`lämna tomt för att behålla nuvarande`,groups:`Grupper`,optional:`valfritt`,autoGeneratedPassword:`Ett säkert lösenord kommer att genereras automatiskt och skickas via e-post till användaren.`,passwordManagedByAdvancedAuth:`Lösenordet hanteras av avancerad autentisering. Använd "Återställ lösenord" för att skicka ett nytt lösenord till användaren via e-post.`,resetPassword:`Återställ lösenord`,resettingPassword:`Återställer lösenord...`},deleteModal:{title:`Ta bort användare`,message:`Är du säker på att du vill ta bort denna användare? Denna åtgärd kan inte ångras.`,confirm:`Ta bort användare`}},streamOverlay:{title:`Strömöverlägg`,invalidPrinterId:`Ogiltigt skrivar-ID`,cameraStream:`Kameraström`,progress:`Förlopp`,eta:`Beräknad tid`,printerIdle:`Skrivaren är inaktiv`,printerOffline:`Skrivare offline`,builder:{title:`Strömningsöverlägg`,description:`Bygg URL:en för ett strömningsöverlägg — en helskärmskameravy med live utskriftsdata som visas ovanpå. Välj de fält du vill ha och kopiera URL:en.`,printer:`Skrivare`,size:`Textstorlek`,sizeSmall:`Liten`,sizeMedium:`Mellanstor`,sizeLarge:`Stor`,fps:`Bildfrekvens`,fpsHint:`A1- och P1-kameror når upp till cirka 5 fps oavsett vad du anger.`,token:`Strömningsöverläggs-token (valfritt)`,tokenHint:`Krävs endast när inloggning är aktiverad: OBS har ingen egen session. Skapa en ovan med strömningsöverläggsomfång.`,tokenWarning:`Denna URL innehåller en token — vem som helst som kan läsa den kan titta på strömmen och se filnamnet. Återkalla token för att blockera den.`,fields:`Fält att visa`,fieldPrinter:`Skrivarnamn`,fieldFilename:`Filnamn`,fieldStatus:`Status`,fieldProgress:`Förloppsindikator`,fieldLayers:`Antal skikt`,fieldEta:`Återstående tid och beräknad tid`,fieldCamera:`Kameramatning`,chamberHint:`Kammartemperatur visas endast på modeller med en riktig kammarsensor — P1- och A1-skrivare rapporterar ett meningslöst värde, så det utelämnas där.`,urlTitle:`Överläggs-URL`,open:`Öppna`,showPreview:`Visa förhandsvisning`,hidePreview:`Dölj förhandsvisning`,previewTitle:`Förhandsvisning av överlägg`},status:{printing:`Skriver ut`,paused:`Pausad`,finished:`Slutförd`,failed:`Misslyckad`,idle:`Inaktiv`,unknown:`Okänd`}},profiles:{title:`Profiler`,subtitle:`Hantera dina slicer-inställningar och tryckkalibreringar`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Lokala profiler`,kprofiles:`K-profiler`},orcaCloud:{connectedAs:`Ansluten som`,connectedShort:`Ansluten till Orca Cloud`,logout:`Koppla från`,noLogoutPermission:`Du har inte behörighet att koppla från`,noConnectPermission:`Du har inte behörighet att ansluta till Orca Cloud`,retry:`Försök igen`,connectButton:`Anslut till Orca Cloud`,connect:{title:`Anslut till Orca Cloud`,description:`Logga in på ditt Orca Cloud-konto för att synkronisera dina slicer-profiler till Bambuddy.`},device:{title:`Godkänn Bambuddy i Orca Cloud`,instruction:`Öppna Orca Cloud och godkänn denna kod. Bambuddy ansluter automatiskt när du godkänner.`,codeLabel:`Din parningskod`,openButton:`Öppna Orca Cloud-godkänningssida`,manualHint:`Eller gå till {{url}} och ange koden ovan.`,waiting:`Väntar på att du godkänner...`,cancel:`Avbryt`},profiles:{title:`Dina Orca Cloud-profiler ({{count}})`,refresh:`Uppdatera`,empty:`Inga profiler hittade i ditt Orca Cloud-konto än.`},toast:{disconnected:`Kopplad från Orca Cloud`},errors:{startFailed:`Kunde inte starta Orca Cloud-parning.`,denied:`Parningen nekades i Orca Cloud.`,expired:`Parningskoden har löpt ut. Klicka på Anslut för att försöka igen.`,pollFailed:`Förlorade anslutningen medan vi väntade på godkännande. Försök igen.`}},localProfiles:{title:`Lokala profiler`,subtitle:`Importera och hantera slicer-inställningar från OrcaSlicer`,import:`Importera profiler`,importDesc:`Släpp .bbscfg, .bbsflmt, .orca_filament, .zip eller .json-filer här`,importing:`Importerar...`,search:`Sök lokala förinställningar...`,noPresets:`Inga lokala förinställningar än`,noSearchResults:`Inga förinställningar matchar din sökning`,badge:`Lokal`,edit:`Redigera`,delete:`Ta bort`,cancel:`Avbryt`,deleteConfirmTitle:`Ta bort förinställning`,deleteConfirm:`Är du säker på att du vill ta bort denna förinställning? Detta kan inte ångras.`,source:`Källa`,inheritsFrom:`Ärver`,filamentType:`Typ`,vendor:`Leverantör`,compatiblePrinters:`Skrivare`,nozzleTemp:`Munstyckstemperatur`,cost:`Kostnad`,density:`Densitet`,pressureAdvance:`Tryckförskott`,filament:`Filament`,process:`Process`,printer:`Skrivare`,toast:{importSuccess:`{{count}} förinställning(ar) importerade`,importSkipped:`{{count}} förinställning(ar) hoppade över (dubbletter)`,importError:`{{count}} fel under import`,deleted:`Förinställning borttagen`,updated:`Förinställning uppdaterad`}},connectedAs:`Ansluten som`,signInExpiredTitle:`Bambu Cloud-inloggning har löpt ut`,signInExpiredBody:`Bambu Lab accepterar inte längre lagrad token. Logga in igen för att återställa molnprofiler, MakerWorld-import och firmware-kontroller.`,logout:`Logga ut`,noLogoutPermission:`Du har inte behörighet att logga ut`,failedToLoad:`Kunde inte ladda profiler`,retry:`Försök igen`,time:{justNow:`Just nu`,minsAgo:`{{count}}m sedan`,hoursAgo:`{{count}}t sedan`,daysAgo:`{{count}}d sedan`},toast:{loggedOut:`Utloggad`},login:{title:`Anslut till Bambu Cloud`,subtitle:`Synkronisera dina slicer-inställningar över enheter`,email:`E-post`,password:`Lösenord`,region:`Region`,regionGlobal:`Global`,regionChina:`Kina`,verificationCode:`Verifieringskod`,totpCode:`Autentiseringskod`,checkEmail:`Kontrollera din e-post ({{email}}) för en 6-siffrig kod`,enterTotpHint:`Ange den 6-siffriga koden från din autentiseringsapp`,accessToken:`Åtkomsttoken`,accessTokenHint:`Klistra in din Bambu Cloud-åtkomsttoken. Konton i Kina måste använda denna metod (telefonbundet — e-postinloggning ej tillgänglig). Se wikin för hur du hämtar token från MakerWorld-cookies.`,back:`Tillbaka`,loginButton:`Logga in`,verifyButton:`Verifiera`,setTokenButton:`Sätt token`,useToken:`Använd åtkomsttoken istället`,captchaTitle:`Bambu Cloud begär en CAPTCHA`,captchaBody:`Bambu utmanar ditt nätverk innan det accepterar en inloggning, och utmaningen kan inte besvaras från Bambuddy. Ditt e-post och lösenord är inte problemet. Blockeringen är kopplad till din offentliga IP-adress och brukar lösa sig själv inom några timmar — upprepade försök gör att den varar längre. För att logga in nu, använd en åtkomsttoken från en webbläsarsession istället.`,useEmail:`Logga in med e-post istället`,toast:{loggedIn:`Inloggad`,codeSent:`Verifieringskod skickad till din e-post`,enterTotp:`Ange kod från din autentiseringsapp`,tokenSet:`Token inställd`}},presets:{myPreset:`Min förinställning (redigerbar)`,duplicate:`Duplicera`,editable:`Redigerbar`,failedToLoadDetails:`Kunde inte ladda förinställningsdetaljer`,deleteConfirm:`Ta bort denna förinställning?`,deleteWarning:`Detta kommer permanent ta bort "{{name}}" från Bambu Cloud. Detta kan inte ångras.`,noDuplicatePermission:`Du har inte behörighet att duplicera förinställningar`,noEditPermission:`Du har inte behörighet att redigera förinställningar`,noDeletePermission:`Du har inte behörighet att ta bort förinställningar`,types:{filament:`Filamentförinställning`,printer:`Skrivarförinställning`,process:`Processförinställning`},toast:{deleted:`Förinställning borttagen`,created:`Förinställning skapad`,updated:`Förinställning uppdaterad`,duplicated:`Förinställning duplicerad`,fieldAdded:`Fält "{{key}}" tillagt`,exported:`Förinställning exporterad`},baseLabel:`Bas: {{name}}`,currentLabel:`Nuvarande: {{name}}`,newPreset:`Ny förinställning`,editPreset:`Redigera förinställning`,duplicatePreset:`Duplicera förinställning`,createNewPreset:`Skapa ny förinställning`,customizeSettings:`Anpassa inställningar för din nya förinställning`,compareWithBase:`Jämför med basförinställning`,compare:`Jämför`,basePreset:`Basförinställning`,selectBasePreset:`Välj basförinställning...`,presetName:`Förinställningsnamn`,myCustomPreset:`Min anpassade förinställning`,inheritsFrom:`Ärver`,dropJsonToImport:`Släpp JSON för att importera`,tabs:{common:`Allmänna`,allFields:`Alla fält`},availableFields:`Tillgängliga fält`,searchFieldsPlaceholder:`Sök fält...`,noMatchingFields:`Inga matchande fält`,allFieldsAdded:`Alla fält tillagda`,addCustomField:`Lägg till anpassat fält`,yourOverrides:`Dina åsidosättningar`,noOverridesYet:`Inga åsidosättningar än`,clickFieldsToAdd:`Klicka på fält till vänster för att lägga till dem`,saveAsTemplate:`Spara som mall`,jsonTip:`Tips: Dra och släpp en .json-fil var som helst i denna modal för att importera inställningar`},cloudView:{searchPlaceholder:`Sök förinställningar...`,templates:`Mallar`,refresh:`Uppdatera`,newPreset:`Ny förinställning`,clearFilters:`Rensa filter`,compareMode:`Jämförelseläge`,selectAnotherPreset:`Välj en annan {{type}}-förinställning`,clickTwoPresets:`Klicka på två förinställningar av samma typ för att jämföra`,selectFirst:`1. Välj första`,selectSecond:`2. Välj andra`,compareNow:`Jämför nu`,lastSynced:`Senast synkroniserad:`,showingCount:`Visar {{showing}} av {{total}} förinställningar`,noPresetsFound:`Inga förinställningar hittade`,columns:{filament:`Filament`,process:`Process`,printer:`Skrivare`},noFilamentPresets:`Inga filamentförinställningar`,noProcessPresets:`Inga processförinställningar`,noPrinterPresets:`Inga skrivarförinställningar`,filters:{type:`Typ`,owner:`Ägare`,printer:`Skrivare`,nozzle:`Munstycke`,filament:`Filament`,layer:`Skikt`,all:`Alla`,myPresets:`Mina förinställningar`,builtIn:`Inbyggda`,process:`Process`},noTemplatesPermission:`Du har inte behörighet att hantera mallar`,noRefreshPermission:`Du har inte behörighet att uppdatera profiler`,noCreatePermission:`Du har inte behörighet att skapa förinställningar`},templates:{title:`Snabbmallar`,noTemplates:`Inga mallar än`,createFirst:`Skapa mallar från förinställningseditorn`,typeFilter:`Typ:`,deleteTitle:`Ta bort mall`,deleteWarning:`Denna åtgärd kan inte ångras`,deleteConfirm:`Är du säker på att du vill ta bort "{{name}}"?`,namePlaceholder:`Mallnamn`,descriptionPlaceholder:`Beskrivning`,settingsJson:`Inställningar (JSON)`,fieldsCount:`{{count}} fält`,shownInModals:`Visas i modaler`,hiddenInModals:`Dold i modaler`,apply:`Tillämpa`,toast:{deleted:`Mall borttagen`,updated:`Mall uppdaterad`,created:`Mall skapad`,applied:`Mall tillämpad`}}},support:{debugLoggingActive:`Felsökningsloggning är aktiv`,manageLogs:`Hantera`,collectItem7:`Skrivaranslutning och firmwareversioner`,collectItem8:`Integrationsstatus (Spoolman, MQTT, HA)`,collectItem9:`Nätverksgränssnitt (endast subnät)`,collectItem10:`Python-paketversioner`,collectItem11:`Databashälsokontroller`,collectItem12:`Docker-miljödetaljer`,bundleGenerating:`Genererar paket...`,bundleStepConnection:`Kör skrivaranslutningskontroller`,bundleStepVirtualPrinters:`Kör kontroll av virtuella skrivare`,bundleStepLogScan:`Söker i senaste loggar efter kända problem`,bundleStepBuild:`Bygger supportpaket-ZIP`},fileManager:{variants:{badge:`{{count}} versioner`,groupAction:`Gruppera som versioner`,groupTooltip:`Markera dessa filer som samma jobb slicade för olika skrivare`,grouped:`Grupperade {{count}} filer som versioner`,printAlternatives:`Skriv ut ({{count}} alternativ)`},title:`Filhanterare`,subtitle:`Organisera och hantera dina utskriftsfiler`,uploadFiles:`Ladda upp filer`,newFolder:`Ny mapp`,folderName:`Mappnamn`,folderNamePlaceholder:`t.ex. Funktionella delar`,renameFile:`Döp om fil`,renameFolder:`Döp om mapp`,invalidFilenameChar:`Tecknet "{{char}}" är inte tillåtet i utskriftsfilnamn. Skrivarens SD-kort avvisar: < > : " / \\ | ? *`,moveFiles:`Flytta {{count}} fil(er)`,rootNoFolder:`Rot (ingen mapp)`,current:`nuvarande`,linkFolder:`Länka mapp`,linkFolderDescription:`Länka "{{name}}" till ett projekt eller arkiv för snabb åtkomst.`,project:`Projekt`,archive:`Arkiv`,noProjectsFound:`Inga projekt hittade`,noArchivesFound:`Inga arkiv hittade`,unlink:`Avlänka`,link:`Länka`,dragDropFiles:`Dra och släpp filer här`,dropFilesHere:`Släpp filer här`,releaseToUpload:`Släpp för att ladda upp`,orClickToBrowse:`eller klicka för att bläddra`,allFileTypesSupported:`Alla filtyper stöds. ZIP-filer kommer att packas upp.`,zipFilesDetected:`ZIP-filer upptäckta`,zipExtractOptions:`ZIP-filer kommer att packas upp. Välj hur du vill hantera mappstrukturen:`,preserveZipStructure:`Bevara mappstruktur från ZIP`,createFolderFromZip:`Skapa mapp från ZIP-filnamn`,stlThumbnailGeneration:`Generering av STL-minibilder`,zipMayContainStl:`ZIP-filer kan innehålla STL-filer. Minibilder kan genereras under extraktion.`,thumbnailsCanBeGenerated:`Minibilder kan genereras för STL-filer. Stora modeller kan ta längre tid att bearbeta.`,generateThumbnailsForStl:`Generera minibilder för STL-filer`,threemfDetected:`3MF-filer upptäckta`,threemfExtractionInfo:`Skrivarmodell, material, färg och utskriftsinställningar kommer automatiskt att extraheras från 3MF-filer.`,willBeExtracted:`Kommer att extraheras`,filesExtracted:`{{count}} filer extraherade`,uploadComplete:`Uppladdning slutförd: {{succeeded}} lyckades`,uploadFailed:`Kunde inte ladda upp`,zipFilesFailed:`{{count}} filer misslyckades`,uploading:`Laddar upp...`,changeLink:`Ändra länk...`,linkTo:`Länka till...`,linkToProjectOrArchive:`Länka till projekt eller arkiv`,generateThumbnail:`Generera minibild`,generateThumbnails:`Generera minibilder`,generateThumbnailsForMissing:`Generera minibilder för STL-filer som saknar dem`,gridView:`Rutnätsvy`,listView:`Listvy`,lowDiskSpaceWarning:`Varning för lågt diskutrymme`,lowDiskSpaceDetails:`Endast {{free}} ledigt av {{total}} totalt. Tröskelvärdet är inställt på {{threshold}} GB i inställningar.`,files:`Filer`,folders:`Mappar`,size:`Storlek`,free:`Ledigt`,allFiles:`Alla filer`,allExternal:`Externa`,externalIsEmpty:`Inga externa filer`,externalEmptyDescription:`Filer i dina länkade externa mappar kommer att visas här.`,wrap:`Radbryt`,enableTextWrapping:`Aktivera radbrytning`,disableTextWrapping:`Inaktivera radbrytning`,collapse:`Fäll in`,collapseFoldersByDefault:`Fäll in mappar som standard`,expandFoldersByDefault:`Fäll ut mappar som standard`,folderSort:`Sortera mappar`,folderSortByName:`Efter namn`,folderSortByActivity:`Efter senaste aktivitet`,dragToResizeTooltip:`Dra för att ändra storlek, dubbelklicka för att återställa`,searchFiles:`Sök filer...`,searchSubfoldersHint:`Inklusive undermappar`,readme:{truncated:`Avkortad`,show:`Visa README`,hide:`Dölj README`,label:`README`},tags:{title:`Taggar`,subtitle:`Märk filer för tvärgående filtrering — leksaker, barnsäkra, endast PETG, vad som helst.`,manage:`Taggar`,manageTitle:`Hantera taggkatalog`,add:`Ny tagg`,edit:`Döp om tagg`,name:`Namn`,fileCount:`Filer`,empty:`Inga taggar än. Skapa en för att börja märka filer.`,noMatches:`Inga matchande taggar.`,createPlaceholder:`t.ex. leksaker, barnsäkra, petg`,createButton:`Skapa`,nameRequired:`Namn krävs.`,searchPlaceholder:`Filtrera taggar...`,created:`Tagg skapad.`,updated:`Tagg omdöpt.`,deleted:`Tagg borttagen.`,saveFailed:`Kunde inte spara tagg.`,deleteFailed:`Kunde inte ta bort tagg.`,applyFailed:`Kunde inte tillämpa taggar.`,applyAdd:`Lägg till taggar`,applyRemove:`Ta bort taggar`,applyAddSuccess:`Lade till {{count}} tagg(ar) på {{files}} fil(er).`,applyRemoveSuccess:`Tog bort {{count}} tagg(ar) från {{files}} fil(er).`,actionAdd:`Lägg till på valda filer`,actionRemove:`Ta bort från valda filer`,tagAction:`Tagg`,bulkTitle:`Tagga {{count}} valda fil(er)`,bulkTooltip:`Lägg till eller ta bort taggar på alla valda filer.`,noPermission:`Du har inte behörighet att tagga filer.`,filterLabel:`Filtrerar efter:`,clearAll:`Rensa alla`,confirmDelete:`Ta bort tagg "{{name}}"?`,confirmDeleteMessage:`Detta tar bort taggen från katalogen. Filerna behåller sina andra taggar.`,confirmDeleteInUseMessage:`Denna tagg används på {{count}} fil(er). Om du tar bort den kommer taggen att tas bort från alla filer; själva filerna påverkas ej.`,editAria:`Redigera {{name}}`,deleteAria:`Ta bort {{name}}`},allTypes:`Alla typer`,prints:`Utskrifter`,ascending:`Stigande`,descending:`Fallande`,showModified:`Visa ändringsdatum`,hideModified:`Dölj ändringsdatum`,lastModified:`Senast ändrad`,lastActivity:`Senaste aktivitet`,resultsCount:`Visar {{showing}} av {{total}} filer`,selectAll:`Markera alla`,deselectAll:`Avmarkera alla`,selected:`{{count}} valda`,adding:`Lägger till...`,loadingFiles:`Laddar filer...`,folderIsEmpty:`Mappen är tom`,noFilesYet:`Inga filer än`,folderEmptyDescription:`Ladda upp filer eller flytta filer till denna mapp för att komma igång.`,noFilesDescription:`Ladda upp filer för att börja organisera dina utskriftsrelaterade filer.`,noMatchingFiles:`Inga matchande filer`,noMatchingFilesDescription:`Inga filer matchar din aktuella sökning eller filterkriterier.`,clearFilters:`Rensa filter`,printedCount:`Utskrivet {{count}} gånger`,uploadedBy:`Uppladdad av`,deleteFolder:`Ta bort mapp`,deleteFile:`Ta bort fil`,deleteFilesCount:`Ta bort {{count}} filer`,deleteFolderConfirm:`Är du säker på att du vill ta bort denna mapp? Alla filer inuti kommer också att tas bort.`,deleteFileConfirm:`Är du säker på att du vill ta bort denna fil?`,deleteFilesConfirm:`Är du säker på att du vill ta bort {{count}} valda filer? Denna åtgärd kan inte ångras.`,deleting:`Tar bort...`,noPermissionRenameFolder:`Du har inte behörighet att döpa om mappar`,noPermissionLinkFolder:`Du har inte behörighet att länka mappar`,noPermissionDeleteFolder:`Du har inte behörighet att ta bort mappar`,onlyEmptyFoldersDeletable:`Du kan endast ta bort tomma mappar`,noPermissionPrint:`Du har inte behörighet att skriva ut`,noPermissionAddToQueue:`Du har inte behörighet att lägga till i kö`,noPermissionSlice:`Du har inte behörighet att slica filer`,noPermissionDownload:`Du har inte behörighet att ladda ner filer`,noPermissionPreview:`Du har inte behörighet att förhandsgranska filer`,preview3d:`3D-förhandsgranskning`,noPermissionRenameFile:`Du har inte behörighet att döpa om denna fil`,noPermissionGenerateThumbnail:`Du har inte behörighet att generera minibilder`,noPermissionDeleteFile:`Du har inte behörighet att ta bort denna fil`,noPermissionCreateFolder:`Du har inte behörighet att skapa mappar`,noPermissionUpload:`Du har inte behörighet att ladda upp filer`,noPermissionMoveFiles:`Du har inte behörighet att flytta filer`,noPermissionDeleteFiles:`Du har inte behörighet att ta bort filer`,linkExternal:`Länka extern`,linkExternalFolder:`Länka extern mapp`,linkExternalFolderDescription:`Montera en värdkatalog (NAS, USB, nätverksdelning) i Filhanteraren. Filerna kopieras inte — de nås direkt från den ursprungliga sökvägen.`,externalFolderNamePlaceholder:`t.ex. NAS-utskrifter`,externalPath:`Värdsökväg`,externalPathHelp:`Absolut sökväg till katalogen på Docker-värden. Måste vara bind-monterad i containern.`,readOnly:`Skrivskyddad`,readOnlyHelp:`förhindrar uppladdningar och borttagningar`,showHiddenFiles:`Visa dolda filer (doldfiler)`,externalFolder:`Extern mapp`,scanFolder:`Sök`,toast:{folderCreated:`Mapp skapad`,openInSlicerFailed:`Kunde inte öppna i slicer`,folderDeleted:`Mapp borttagen`,fileDeleted:`Fil borttagen`,filesDeleted:`Tog bort {{count}} filer`,filesMoved:`Filer flyttade`,folderLinked:`Mapp länkad`,folderUnlinked:`Mapp avlänkad`,externalFolderLinked:`Extern mapp länkad och skannad`,folderScanned:`Skanning slutförd: {{added}} tillagda, {{removed}} borttagna`,addedToQueue:`Lade till {{count}} fil(er) i kön`,addedToQueuePartial:`Lade till {{added}} fil(er), {{failed}} misslyckades`,failedToAddToQueue:`Kunde inte lägga till filer: {{error}}`,fileRenamed:`Fil omdöpt`,folderRenamed:`Mapp omdöpt`,thumbnailsGenerated:`Genererade {{count}} minibild(er)`,thumbnailsGeneratedPartial:`Genererade {{succeeded}} minibild(er), {{failed}} misslyckades`,noStlMissingThumbnails:`Inga STL-filer saknar minibilder`,failedToGenerateThumbnails:`Kunde inte generera minibilder: {{error}}`,thumbnailGenerated:`Minibild genererad`,failedToGenerateThumbnail:`Kunde inte generera minibild: {{error}}`}},projects:{parentLabel:`Överordnat projekt`,parentNone:`Ingen (toppnivåprojekt)`,parentHint:`Placera detta projekt under ett annat så att dess siffror rullas upp i ett huvudprojekt`,partOf:`Del av {{name}}`,subProjectCount:`{{count}} delprojekt`,subProjectsOf:`Delprojekt till {{name}}`,collapseSubProjects:`Fäll in delprojekt`,expandSubProjects:`Fäll ut delprojekt`,title:`Projekt`,subtitle:`Organisera och spåra dina 3D-utskriftsprojekt`,newProject:`Nytt projekt`,editProject:`Redigera projekt`,deleteProject:`Ta bort projekt`,projectName:`Projektnamn`,description:`Beskrivning`,noProjects:`Inga projekt än`,noProjectsFiltered:`Inga {{status}}-projekt`,noProjectsFilteredHelp:`Du har inga {{status}}-projekt. Projekt kommer att visas här när deras status ändras.`,createFirst:`Skapa ditt första projekt för att börja organisera relaterade utskrifter, spåra framsteg och hantera dina byggen.`,createFirstButton:`Skapa ditt första projekt`,create:`Skapa`,files:`Filer`,prints:`Utskrifter`,plates:`plattor`,parts:`delar`,lastModified:`Senast ändrad`,deleteConfirm:`Är du säker på att du vill ta bort detta projekt? Arkiv och köposter kommer att avlänkas men inte tas bort.`,addFiles:`Lägg till filer`,removeFile:`Ta bort fil`,viewDetails:`Visa detaljer`,namePlaceholder:`t.ex. Voron 2.4 bygge`,descriptionPlaceholder:`Valfri beskrivning...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URL måste börja med http:// eller https://`,openExternalUrl:`Öppna projekt-URL`,coverImageLabel:`Omslagsbild`,coverImageAlt:`Projektomslagsbild`,coverImageUpload:`Ladda upp`,coverImageReplace:`Ersätt`,coverImageRemove:`Ta bort`,color:`Färg`,targetPlates:`Målplattor`,targetPlatesPlaceholder:`t.ex. 25`,targetPlatesHelp:`Antal utskriftsjobb`,targetParts:`Måldelar`,targetPartsPlaceholder:`t.ex. 150`,targetPartsHelp:`Totalt antal objekt som behövs`,targetSets:`Kopior per fil`,targetSetsPlaceholder:`t.ex. 10`,targetSetsHelp:`Antal gånger varje utskriftsbar fil ska skrivas ut`,tagsLabel:`Taggar (komma-separerade)`,tagsPlaceholder:`t.ex. voron, funktionella, present`,dueDate:`Förfallodatum`,priority:`Prioritet`,priorityLow:`Låg`,priorityNormal:`Normal`,priorityHigh:`Hög`,priorityUrgent:`Brådskande`,statusActive:`Aktivt`,statusCompleted:`Slutfört`,statusArchived:`Arkiverat`,done:`Klar`,completed:`slutförd`,failed:`misslyckad`,inQueue:`i kö`,noPrintsYet:`Inga utskrifter än`,printJobs:`Utskriftsjobb (plattor)`,partsPrinted:`Delar utskrivna`,failedParts:`Misslyckade delar`,import:`Importera`,export:`Exportera`,importProject:`Importera projekt`,exportAll:`Exportera alla projekt`,loading:`Laddar projekt...`,noEditPermission:`Du har inte behörighet att redigera projekt`,noDeletePermission:`Du har inte behörighet att ta bort projekt`,noCreatePermission:`Du har inte behörighet att skapa projekt`,noImportPermission:`Du har inte behörighet att importera projekt`,noExportPermission:`Du har inte behörighet att exportera projekt`,toast:{created:`Projekt skapat`,updated:`Projekt uppdaterat`,deleted:`Projekt borttaget`,imported:`Projekt importerat`,multipleImported:`{{count}} projekt importerade`,importFailed:`Kunde inte importera`,exported:`Projekt exporterade (endast metadata)`}},projectDetail:{notFound:`Projekt hittades ej`,backToProjects:`Tillbaka till projekt`,export:`Exportera`,exportProject:`Exportera projekt`,noExportPermission:`Du har inte behörighet att exportera projekt`,noEditPermission:`Du har inte behörighet att redigera projekt`,partOf:`Del av:`,priorityLabel:`Prioritet:`,noPrints:`Inga utskrifter i detta projekt än`,status:{active:`Aktivt`,completed:`Slutfört`,archived:`Arkiverat`},priority:{low:`Låg`,normal:`Normal`,high:`Hög`,urgent:`Brådskande`},dueDate:{overdue:`Försenad`,today:`Förfaller idag`,daysLeft:`{{count}} dagar kvar`},progress:{platesProgress:`Plattförlopp`,partsProgress:`Delförlopp`,setsProgress:`Kompletta set`,sets:`set`,setsHint:`Ett set är komplett när varje utskriftsbar fil har nått detta antal`,printJobs:`utskriftsjobb`,parts:`delar`,percentComplete:`{{percent}}% klar`,remaining:`{{count}} återstående`},stats:{printJobs:`Utskriftsjobb`,total:`totalt`,failed:`{{count}} misslyckade`,partsPrinted:`{{count}} delar utskrivna`,printTime:`Utskriftstid`,filamentUsed:`Filament använt`},cost:{title:`Kostnadsspårning`,filamentCost:`Filamentkostnad`,energy:`Energi`,totalCost:`Uppskattad kostnad`,total:`Totalt`,includesBom:`inkl. BOM`,budget:`Budget`,remaining:`Återstående`},subProjects:{title:`Delprojekt ({{count}})`,jobs:`{{count}} jobb`},rollup:{title:`Inkluderar {{count}} delprojekt`,progress:`Total förlopp`,percentComplete:`{{percent}}% klar`},notes:{title:`Anteckningar`,noEditPermission:`Du har inte behörighet att redigera anteckningar`,placeholder:`Lägg till anteckningar om detta projekt...`,empty:`Inga anteckningar än. Klicka på Redigera för att lägga till anteckningar.`},files:{title:`Filer`,linkFolders:`Länka mappar från Filhanteraren`,forQuickAccess:`till detta projekt för snabb åtkomst.`,fileCount:`{{count}} fil(er)`,empty:`Inga mappar länkade. Gå till Filhanteraren och länka en mapp till detta projekt.`,printedCount:`Utskrivet {{count}} gång(er)`,progressTooltip:`{{done}} av {{target}} slutförda utskrifter`,noFiles:`Inga filer i denna mapp.`},bom:{title:`Materialförteckning`,acquired:`{{completed}}/{{total}} anskaffade`,showAll:`Visa alla`,hideDone:`Dölj klara`,addPart:`Lägg till del`,noAddPermission:`Du har inte behörighet att lägga till delar`,partNamePlaceholder:`Delnamn (t.ex. M3x8 skruvar)`,partName:`Delnamn`,qty:`Antal`,price:`Pris ({{currency}})`,sourcingUrlPlaceholder:`Inköps-URL (valfritt)`,remarksPlaceholder:`Anteckningar (valfritt)`,deletePart:`Ta bort del`,deleteConfirm:`Är du säker på att du vill ta bort "{{name}}"?`,noUpdatePermission:`Du har inte behörighet att uppdatera delar`,noEditPermission:`Du har inte behörighet att redigera delar`,noDeletePermission:`Du har inte behörighet att ta bort delar`,totalCost:`Total kostnad:`,empty:`Inga delar i materialförteckningen. Lägg till hårdvara, elektronik eller andra komponenter för att spåra vad som behöver anskaffas.`},timeline:{title:`Aktivitetstidslinje`,empty:`Ingen aktivitet än.`},template:{saveAsTemplate:`Spara som mall`,noCreatePermission:`Du har inte behörighet att skapa mallar`},queue:{title:`Kö`,viewAll:`Visa alla`,printing:`{{count}} skriver ut`,queued:`{{count}} i kö`},prints:{title:`Utskrifter ({{count}})`},toast:{projectUpdated:`Projekt uppdaterat`,partAdded:`Del tillagd`,partRemoved:`Del borttagen`,exportFailed:`Kunde inte exportera`,projectExported:`Projekt exporterat`,templateCreated:`Mall skapad`}},system:{title:`Systeminformation`,version:`Version`,uptime:`Driftstid`,cpuUsage:`CPU-användning`,memoryUsage:`Minnesanvändning`,diskUsage:`Diskanvändning`,networkInfo:`Nätverksinformation`,logs:`Loggar`,debugMode:`Felsökningsläge`,enableDebug:`Aktivera felsökningsloggning`,disableDebug:`Inaktivera felsökningsloggning`,downloadLogs:`Ladda ner loggar`,clearLogs:`Rensa loggar`,dockerInfo:`Docker-information`,containerName:`Container-namn`,imageName:`Avbildsnamn`,platform:`Plattform`,architecture:`Arkitektur`},sponsors:{sectionTitle:`Oberoende och community-finansierat`,tagline:`Bambuddy är gratis och förblir det tack vare att människor väljer att stödja det. Inga riskkapitalister, ingen molninlåsning.`,viewSupporters:`Visa supporters`,toastPrints:`Du har slutfört {{count}} utskrifter med Bambuddy. Bambuddy förblir gratis tack vare sina supporters.`,toastCost:`Du har spårat {{total}} i filament med Bambuddy. Se vilka som håller projektet oberoende.`,toastArchives:`{{count}} utskrifter arkiverade med Bambuddy. Se vilka som håller det oberoende.`,toastAnniversary:`Ett år med Bambuddy! Se vilka som håller projektet oberoende.`,toastVersionUpdate:`Uppdaterad till v{{version}}. Bambuddy förblir gratis tack vare sina supporters.`,toastBusiness:`Kör du Bambuddy på {{count}} skrivare? Det finns ett supportavtal för team — prioriterade åtgärder, fakturering och direktkontakt med underhållaren.`,businessCta:`Bambuddy för företag`,businessTitle:`Bambuddy för företag`,businessTagline:`Du kör {{count}} skrivare. Prioriterad support, kommersiell licensiering och fakturering är tillgängliga för team och utskriftsfarmar.`},library:{title:`Filamentbibliotek`,addFilament:`Lägg till filament`,editFilament:`Redigera filament`,deleteFilament:`Ta bort filament`,vendor:`Leverantör`,material:`Material`,color:`Färg`,kFactor:`K-faktor`,temperature:`Temperatur`,noFilaments:`Inga filament i biblioteket`,deleteConfirm:`Är du säker på att du vill ta bort detta filament?`,importFromPrinter:`Importera från skrivare`,exportToFile:`Exportera till fil`,runWithPipeline:{actionLabel:`Kör med pipeline`,noPermission:`Du har inte behörighet att köra pipelines`,modalTitle:`Kör med pipeline`,confirmTitle:`Bekräfta körning`,confirmIntro:`Förkontroll fann problem med denna körning`,sourceHint:`Källa`,pipelineHint:`Pipeline`,targetHint:`Mål`,pipelineListAria:`Tillgängliga pipelines`,runAnyway:`Kör ändå`,loading:`Laddar…`,empty:`Inga pipelines sparade än. Öppna slicing-dialogrutan och klicka på "Spara som pipeline" för att skapa en.`,noTarget:`Ingen målskrivare inställd`,noTargetMessage:`Denna pipeline har ingen målskrivare inställd. Öppna den i Inställningar för att välja en.`,copies:`Kopierar`,copiesHint:`max {{n}}`,classTarget:`Alla {{model}}`,toast:{started:`Pipeline-körning startad`,failed:`Kunde inte starta körning`},issue:{printerNotSet:`Ingen målskrivare inställd på denna pipeline.`,printerNotFound:`Målskrivaren finns inte längre.`,printerDisabled:`Målskrivaren är inaktiverad.`,printerOffline:`Målskrivaren är offline.`,filamentType:`Filament-fack {{slot}}: förväntade {{expected}}, AMS har {{actual}}`,filamentColor:`Filament-fack {{slot}}: färg skiljer sig (förväntad {{expected}}, AMS har {{actual}})`,amsSlotMissing:`AMS-fack {{slot}} inte tillgängligt på denna skrivare`,filamentUnverified:`Filament-fack {{slot}} kommer från en moln-/standardförinställning och kunde inte verifieras statiskt.`,noClassMatches:`Inga skrivare i denna installation matchar pipelines målskrivarklass ({{expected}}).`,classNotSet:`Pipeline-målet är inställt på en skrivarklass men ingen modell valdes.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Visar slicer-standardvärden: din slicer-sidecar är äldre än denna funktion och kan inte rapportera en förinställnings värden. Uppdatera sidecar-bilden för att se dem. Allt du inte ändrar använder fortfarande förinställningen.`,presetValuesNotConfigured:`Visar slicer-standardvärden: ingen slicer-sidecar är konfigurerad, så en förinställnings värden kan inte läsas. Allt du inte ändrar använder fortfarande förinställningen.`,presetValuesSidecarUnavailable:`Visar slicer-standardvärden: slicer-sidecaren svarade inte, så en förinställnings värden kan inte läsas. Allt du inte ändrar använder fortfarande förinställningen.`,presetValuesUnavailable:`Visar slicer-standardvärden: den valda förinställningens egna värden kunde inte läsas. Allt du inte ändrar använder fortfarande förinställningen.`,filamentDefault:`Standard`,fromFile:`från fil`,fromFileHint:`Designern ändrade detta i källfilen. Dess värde är {{value}}.`,fromFilePrinterCoupled:`designerns skrivare`,fromFilePrinterCoupledHint:`Optimerad för den skrivare denna fil designades för — kan vara fel eller utanför intervallet på din.`,fromFileOverridesPreset:`åsidosätter förinställning`,fromFileOverridesPresetHint:`Filen sätter detta till {{value}} där förinställningen du valde använder {{preset}}. Markera endast om filen ska gälla.`,useFromFile:`Använd källfilens värde för {{option}}`,otherFromFile:`Andra inställningar från denna fil`,fromFileSummary:`Designern ändrade {{count}} processinställningar i denna fil. Endast de du markerar används.`,fromFileUseAll:`Använd designerns inställningar`,fromFileUseAllHint:`Markerar inställningar som gäller över skrivare. De som är optimerade för designerns egen skrivare, och de som definierar förinställningen du valde, förblir avmarkerade.`,fromFileClear:`Rensa {{count}}`,loading:`Laddar slicer-inställningar…`,mode:{simple:`Enkel`,advanced:`Avancerad`,expert:`Expert`},searchPlaceholder:`Sök inställningar`,resetAll:`Återställ {{count}}`,resetOption:`Återställ till standard`,noMatches:`Inga inställningar matchar denna sökning.`},slice:{filamentSlotUnset:`inte inställt`,processSettingsEmbedded:`Används inte medan "Använd filens inbyggda inställningar" är på -- filens egna inställningar driver denna slicing.`,processSettingsInactive:`Inaktiv`,presetsHidden:`{{count}} dold`,showAllPresets:`Visa alla`,showFewerPresets:`Visa färre`,processSettings:`Processinställningar`,processSettingsHint:`Justera den valda förinställningen för denna slicing. Allt du inte rör förblir som förinställningen definierar det.`,processSettingsChanged:`{{count}} ändrades`,processSettingsUnchanged:`Standardförinställningar`,title:`Slica modell`,action:`Slica`,actionAll:`Slica alla {{count}} plattor`,actionAllTitle:`Slica varje platta till en enda flerplattsutskrift (ett enda arkiv). Filamentvalet täcker alla fack som projektet definierar.`,allPlatesToggle:`Slica alla {{count}} plattor`,slicing:`Slicar`,printer:`Skrivarprofil`,process:`Processprofil`,filament:`Filamentprofil`,filamentSlot:`Filament {{index}} ({{type}})`,filamentColour:`Filamentfärg`,selectPreset:`— Välj en förinställning —`,loadingPresets:`Laddar förinställningar…`,analyzingPlateFilaments:`Analyserar plattfilament…`,analyzingPlateFilamentsHint:`Kör en förhandsgransknings-slicing för att upptäcka vilka AMS-fack denna platta använder. Cachad efteråt — omöjligt att öppna igen.`,previewToast:`Analyserar {{name}} — {{elapsed}}`,previewWithProgress:`Analyserar {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— används inte av denna platta`,noPresetsForSlot:`Inga förinställningar tillgängliga`,otherPrinters:`Andra skrivare`,presetsLoadFailed:`Kunde inte ladda förinställningar. Öppna Inställningar → Profiler för att importera dem först.`,refreshPresets:`Uppdatera`,refreshPresetsTitle:`Uppdatera förinställningar — hämta de senaste moln- och buntade listorna (använd efter att ha tagit bort en förinställning i Bambu Studio eller Bambu Handy)`,allPresetsRequired:`Alla förinställningar måste väljas`,useEmbedded:`Använd filens inbyggda inställningar`,useEmbeddedHint:`Slica den på det sätt designern ställt in den (väggar, fyllning, filament) istället för profilerna ovan. Erbjuds eftersom din skrivare matchar filens.`,autoOrient:`Auto-orientera objekt`,autoOrientHint:`Låt slicern vända varje objekt till dess bästa utskriftssida först. Åsidosätter det sätt modellen lades ner i filen.`,autoArrange:`Auto-placera på plattan`,autoArrangeHint:`Låt slicern positionera objekten så att de inte längre överlappar. Ersätter layouten som filen kom med.`,enqueuing:`Skickar slicing-jobb…`,queued:`Köad…`,failed:`Slicing misslyckades. Kontrollera slicer-sidecar-loggarna.`,startedToast:`Slicar {{name}} i bakgrunden…`,queuedToast:`Köat: {{name}} — {{elapsed}}`,runningToast:`Slicar {{name}} — {{elapsed}}`,runningWithProgress:`{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,runningWithProgressMultiPlate:`Platta {{plateIndex}} av {{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,completedToast:`Slicad {{name}}`,externalWriteFallbackToast:`Sparad i det interna biblioteket: den externa mappen kunde inte skrivas till`,failedTitle:`Slicing misslyckades`,failedToast:`Slicing {{name}} misslyckades: {{detail}}`,tier:{local:`Importerad`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Standard`},cloud:{notAuthenticated:`Logga in på Bambu Cloud (Inställningar → Profiler → Bambu Cloud) för att se dina förinställningar i molnet.`,expired:`Bambu Cloud-session har löpt ut — logga in igen för att uppdatera dina förinställningar i molnet.`,unreachable:`Bambu Cloud är otillgänglig just nu. Lokala och standardförinställningar fungerar fortfarande.`},orcaCloud:{notAuthenticated:`Logga in på Orca Cloud (Profiler → Orca Cloud) för att se dina Orca-förinställningar.`,expired:`Orca Cloud-session har löpt ut — logga in igen för att uppdatera dina Orca-förinställningar.`,unreachable:`Orca Cloud är otillgänglig just nu. Andra förinställningar fungerar fortfarande.`},bedType:{label:`Byggplatta`,auto:`Auto (använd processförinställning)`,coolPlate:`Cool Plate`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Texturerad PEI-platta`,smoothPEI:`Slät PEI-platta`},pipelines:{label:`Pipeline`,applyAria:`Tillämpa pipeline`,applyPrompt:`Tillämpa pipeline…`,empty:`Inga sparade pipelines`,saveButton:`Spara som pipeline`,saveTitle:`Spara det aktuella fyrfacks-valet som en återanvändbar pipeline`,namePlaceholder:`Pipeline-namn`,nameAria:`Nytt pipeline-namn`,toast:{applied:`Tillämpade "{{name}}"`,saved:`Pipeline sparad`,saveFailed:`Kunde inte spara`}}},spoolman:{title:`Spoolman-integration`,enabled:`Spoolman aktiverad`,url:`Spoolman-URL`,connected:`Ansluten`,disconnected:`Inte ansluten`,testConnection:`Testa anslutning`,sync:`Synkronisera`,syncing:`Synkroniserar…`,lastSync:`Senaste synkronisering`,linkToSpoolman:`Länka till Spoolman`,openInSpoolman:`Öppna i Spoolman`,unlinkSpool:`Avlänka rulle`,unlinkConfirmTitle:`Avlänka rulle?`,unlinkConfirmMessage:`Detta kommer att ta bort rullen från detta fack. Rulldatan i sig kommer att förbli oförändrad.`,selectSpool:`Välj rulle`,noUnlinkedSpools:`Inga olänkade rullar tillgängliga`,linkSuccess:`Rulle tilldelad`,linkFailed:`Kunde inte tilldela rulle`,unlinkSuccess:`Rulle avlänkad`,unlinkFailed:`Kunde inte avlänka rulle`,linkedSpool:`Tilldelad rulle`,spoolId:`Rull-ID`,fillSourceLabel:`(Spoolman)`,weight:`Vikt`,remaining:`Återstående`,disableWeightSync:`Inaktivera AMS uppskattade vikt-synkronisering`,disableWeightSyncDesc:`Uppdatera inte återstående kapacitet från AMS-uppskattningar. Använd detta om du föredrar Spoolmans användningsspårning framför AMS-procentbaserade uppskattningar. Nya rullar kommer fortfarande att använda AMS-uppskattningen som sin initiala vikt.`,reportPartialUsage:`Rapportera partiell användning för misslyckade utskrifter`,reportPartialUsageDesc:`När en utskrift misslyckas eller avbryts, rapportera den uppskattade filamentanvändningen fram till den punkten baserat på skiktförloppet.`},locations:{title:`Lagringsplatser`,subtitle:`Hantera hyllor, lådor och andra fysiska lagringsplatser för dina rullar`,add:`Lägg till plats`,addShort:`Lägg till`,edit:`Redigera plats`,name:`Namn`,spools:`Rullar`,sensors:`Sensorer`,empty:`Inga lagringsplatser än. Skapa din första hylla eller låda.`,manage:`Platser`,createPlaceholder:`t.ex. Hylla A, Låda 1`,nameRequired:`Platsnamn krävs`,created:`Plats skapad`,updated:`Plats uppdaterad`,deleted:`Plats borttagen`,saveFailed:`Kunde inte spara plats`,deleteFailed:`Kunde inte ta bort plats`,deleteBlocked:`Ta bort alla rullar från denna plats innan du tar bort den`,confirmDelete:`Ta bort "{{name}}"?`,confirmDeleteMessage:`Denna plats kommer att tas bort från katalogen. Rullar måste flyttas först.`,confirmDeleteMessageWithSensors:`Denna plats kommer att tas bort från katalogen. Spolar måste flyttas först. Anslutna sensorer kommer också att raderas.`},inventory:{title:`Rullinventarium`,subtitle:`Hantera dina rullar`,addToInventory:`Lägg till i inventariet`,addToInventoryPending:`Lägger till…`,addToInventorySuccess:`Rulle tillagd i inventariet`,addToInventoryFailed:`Kunde inte lägga till rulle i inventariet`,unknownSpoolTitle:`Nytt filament upptäckt`,unknownSpoolMessage:`En rulle med en okänd RFID-tagg upptäcktes på {{location}}. Lägg till den i ditt inventarium nu?`,unknownSpoolSlot:`Fack`,bulk:{selectAllVisible:`Markera alla synliga`,selectRow:`Markera rad`,selectGroup:`Markera grupp`,selectionCount:`{{count}} valda`,edit:`Redigera`,printLabels:`Skriv ut etiketter`,resetUsage:`Återställ användning`,restore:`Återställ`,archive:`Arkivera`,delete:`Ta bort`,clearSelection:`Rensa val`,editTitle:`Massredigera rullar`,editSubtitle:`Tillämpas på {{count}} valda rullar. Endast de fält du markerar kommer att uppdateras.`,editHint:`Skriv i ett fält för att markera det för uppdatering — endast markerade rader skickas. Lämna ett fält tomt för att behålla rullarna oförändrade (rensning av fält är endast per rulle).`,useCustom:`Använd "{{value}}"`,toggleField:`Växla uppdatering för detta fält`,changeCount:`{{count}} fält kommer att uppdateras.`,applyPending:`Tillämpar…`,applyButton:`Tillämpa på {{count}} rullar`,deleteTitle:`Ta bort valda rullar`,archiveTitle:`Arkivera valda rullar`,restoreTitle:`Återställ valda rullar`,resetUsageTitle:`Återställ användning på valda rullar`,deleteMessage:`Ta bort {{count}} rullar permanent? Detta kan inte ångras.`,archiveMessage:`Arkivera {{count}} rullar? De kan återställas senare.`,restoreMessage:`Återställ {{count}} arkiverade rullar?`,resetUsageMessage:`Återställ "Totalt förbrukat"-räknaren på {{count}} rullar? Återstående vikt bevaras.`,updateSuccess:`{{count}} rullar uppdaterade`,updateFailed:`Kunde inte uppdatera`,updatePartial:`{{ok}} rullar uppdaterade, {{failed}} misslyckades`,updateAllFailed:`Alla {{count}} rulluppdateringar misslyckades — val bevaras så att du kan försöka igen`,deleteSuccess:`{{count}} rullar borttagna`,deleteFailed:`Kunde inte ta bort`,deletePartial:`{{ok}} rullar borttagna, {{failed}} misslyckades`,deleteAllFailed:`Alla {{count}} rullborttagningar misslyckades — val bevaras så att du kan försöka igen`,archiveSuccess:`{{count}} rullar arkiverade`,archiveFailed:`Kunde inte arkivera`,archivePartial:`{{ok}} rullar arkiverade, {{failed}} misslyckades`,archiveAllFailed:`Alla {{count}} rullarkiveringar misslyckades — val bevaras så att du kan försöka igen`,restoreSuccess:`{{count}} rullar återställda`,restoreFailed:`Kunde inte återställa`,restorePartial:`{{ok}} rullar återställda, {{failed}} misslyckades`,restoreAllFailed:`Alla {{count}} rullåterställningar misslyckades — val bevaras så att du kan försöka igen`,invalidHex:`Ange 6 hex-tecken (RRGGBB) eller 8 (RRGGBBAA). Fältet kommer inte att tillämpas annars.`},spoolmanMixedContentTitle:`Spoolman kan inte laddas över HTTPS — blandat innehåll blockeras av din webbläsare`,spoolmanMixedContentBody:`Bambuddy serveras över HTTPS (via din omvända proxy), men din Spoolman-URL är fortfarande vanlig HTTP. Webbläsare blockerar blandat innehåll av säkerhetsskäl, så det inbäddade Spoolman-gränssnittet kan inte renderas. Spoolman måste vara åtkomligt över HTTPS för att detta ska fungera.`,spoolmanMixedContentFixReverseProxy:`Placera Spoolman bakom samma omvända proxy som Bambuddy (Traefik / Nginx / Caddy) med HTTPS, uppdatera sedan Spoolman-URL:en i Inställningar till den nya HTTPS-adressen.`,spoolmanMixedContentFixOpenNewTab:`För en tillfällig lösning, öppna Spoolman i en ny webbläsarflik över HTTP — regler för blandat innehåll gäller endast för inbäddade ramar, så en fristående flik fungerar fortfarande.`,spoolmanOpenInNewTab:`Öppna Spoolman i en ny flik`,labels:{title:`Skriv ut rulletiketter`,selectedCount:`{{count}} valda`,pickSpools:`Välj vilka rullar du vill skriva ut etiketter för:`,monochrome:`Monokrom (svartvit skrivare)`,monochromeHint:`Tar bort färgprovet och breddar texten`,startingPosition:`Startposition för etikett`,startingPositionRange:`Endast arkmallar: L7160 stöder 1–21; 5160 stöder 1–30.`,startingPositionInvalid:`Ange ett heltal från 1 till {{capacity}}.`,startingPositionFirst:`Utskriften börjar vid position 1.`,startingPositionSkipped:`Positionerna 1 till {{lastPosition}} lämnas tomma på det första arket.`,startingPositionRangeError:`Startpositionen måste vara mellan 1 och {{capacity}} för detta ark.`,searchPlaceholder:`Sök namn, märke eller #ID`,filterByMaterial:`Material:`,allMaterials:`Alla`,selectVisible:`Markera alla synliga ({{count}})`,deselectVisible:`Avmarkera synliga`,clearAll:`Rensa alla`,noSpoolsToShow:`Inga rullar att visa. Justera ditt filter och försök igen.`,noMatches:`Inga rullar matchar den aktuella sökningen eller filtren.`,printOne:`Skriv ut etikett för denna rulle`,printLabels:`Skriv ut etiketter…`,bulkTitle:`Välj rullar för att skriva ut etiketter från de {{count}} som visas`,noSpoolsTitle:`Inga rullar att göra etikett för`,error:`Kunde inte generera etiketter: {{msg}}`,sortBy:{label:`Sortera:`,id:`Efter ID`,color:`Efter färg`},templates:{amsHolderSmall:{label:`AMS-hållare — liten (74 × 33 mm)`,hint:`En etikett per sida; matchar den utskrivbara etiketten från MakerWorld-modell 752566 (AMS Filament Label Holder).`},amsHolderLarge:{label:`AMS-hållare — stor (75 × 55 mm)`,hint:`En etikett per sida; passar varianten med pappersinsats av AMS Filament Label Holder. Tillräckligt med utrymme för färgprov, märke, material, ID och QR-kod.`},box40x30:{label:`Lådetikett (40 × 30 mm)`,hint:`En etikett per sida; vanlig DK/Brother-rullstorlek, bra för filamentpåse- och lagringslådetiketter.`},box:{label:`Lådetikett (62 × 29 mm)`,hint:`En etikett per sida; storlek för Brother PT/QL och Dymo små etiketter.`},averyL7160:{label:`Avery L7160 — A4-ark (38,1 × 63,5 mm × 21)`,hint:`EU-ark; 21 etiketter per A4-sida.`},avery5160:{label:`Avery 5160 — US Letter-ark (25,4 × 66,7 mm × 30)`,hint:`US-ark; 30 etiketter per Letter-sida.`}}},csv:{importButton:`Importera CSV`,exportButton:`Exportera CSV`,modalTitle:`Importera rullar från CSV`,selectFile:`Välj en CSV-fil eller dra den hit`,dragHint:`Rubrik: material (obligatoriskt), brand, subtype, color_name, rgba, …`,parsing:`Läser fil…`,previewError:`Kunde inte läsa CSV-filen`,validCount:`{{count}} giltiga`,errorCount:`{{count}} fel`,skippedCount:`{{count}} hoppade över`,colRow:`Rad`,colStatus:`Status`,colColor:`Färg`,colorResolved:`Färg ifylld från katalog`,colorCrossMaterial:`Färg tagen från ett annat material — ingen exakt matchning i katalogen`,duplicateExisting:`En rulle med detta material, märke och färg finns redan — den kommer fortfarande att importeras som en ny rulle`,spoolmanHint:`I Spoolman-läge, använd Spoolmans inbyggda CSV-import/export.`,importValidRows:`Importera {{count}} giltiga rader`,noValidRows:`Inga giltiga rader`,importing:`Importerar…`,importSuccess:`{{count}} rullar importerade`,importError:`Kunde inte importera`,exportError:`Kunde inte exportera`},addSpool:`Lägg till rulle`,editSpool:`Redigera rulle`,copySpool:`Kopiera rulle`,material:`Material`,selectMaterial:`Välj material...`,subtype:`Subtyp`,brand:`Märke`,searchBrand:`Sök märke...`,useCustomBrand:`Använd "{{brand}}"`,useCustomMaterial:`Använd anpassat material: {{material}}`,suggestedOptions:`Föreslagna`,allOptions:`Alla`,colorName:`Färgnamn`,colorNamePlaceholder:`Jade-vit, Eldröd...`,color:`Färg`,hexColor:`Hex-färg`,pickColor:`Välj anpassad färg`,labelWeight:`Etikettvikt`,coreWeight:`Tom rullvikt`,searchSpoolWeight:`Sök rullvikt...`,weightUsed:`Använt`,currentWeight:`Återstående vikt`,measuredWeight:`Uppmätt vikt`,spoolName:`Rulle`,costPerKg:`Kostnad per kg`,storageLocation:`Lagringsplats`,temperature:`Temperatur`,humidity:`Luftfuktighet`,battery:`Batteri`,storageLocationPlaceholder:`t.ex. Hylla A, Låda 1`,openInInventory:`Öppna i inventarium`,measuredWeightError:`Uppmätt vikt måste vara mellan {{min}}g och {{max}}g.`,slicerFilament:`Slicer-filament`,slicerFilamentName:`Slicer-förinställningsnamn`,slicerPreset:`Slicer-förinställning`,searchPresets:`Sök filamentförinställningar...`,selectedPreset:`Vald`,noPresetsFound:`Inga förinställningar hittade`,tempOverrides:`Temperaturåsidosättningar`,note:`Anteckning`,notePlaceholder:`Eventuella ytterligare anteckningar om denna rulle...`,category:`Kategori`,categoryPlaceholder:`t.ex. Produktion, Prototyp, Kund A`,categoryNone:`Okategoriserad`,storageLocationNone:`Ingen lagringsplats inställd`,lowStockThresholdOverride:`Lågt lagertröskelvärde (denna rulle)`,lowStockThresholdOverrideHelp:`Lämna tomt för att använda det globala tröskelvärdet ({{global}}%).`,clearRfid:`Rensa RFID-tagg`,rfidCleared:`RFID-tagg rensad`,archive:`Arkivera`,restore:`Återställ`,noSpools:`Inga rullar än. Lägg till din första rulle för att komma igång.`,noAvailableSpools:`Inga rullar tillgängliga. Lägg till en rulle i ditt inventarium eller avlänka en från ett annat fack först.`,kProfiles:`K-profiler`,addKProfile:`Lägg till K-profil`,assignSpool:`Tilldela rulle`,unassignSpool:`Avlänka`,assignSuccess:`Rulle tilldelad och AMS-fack konfigurerat`,assignPendingInsert:`Tilldelad. Facket kommer att konfigureras när du sätter in rullen.`,assignFailed:`Kunde inte tilldela rulle`,selectSpool:`Välj en rulle att tilldela detta fack`,assigned:`Tilldelad`,assigning:`Tilldelar…`,searchSpools:`Sök rullar...`,showAllSpools:`Visa alla rullar`,spoolmanSpools:`Spoolman-rullar`,allMaterials:`Alla material`,filterByBrand:`Filtrera efter märke...`,showArchived:`Visa arkiverade`,quickAdd:`Snabb-lägg-till (Lager)`,quantity:`Kvantitet`,stock:`Lager`,configured:`Konfigurerad`,spoolsCreated:`{{count}} rullar skapade`,spoolsPartiallyCreated:`{{created}} av {{total}} rullar skapade (några misslyckades)`,spoolCreated:`Rulle skapad`,spoolUpdated:`Rulle uppdaterad`,spoolDeleted:`Rulle borttagen`,deepLinkSpoolNotFound:`Rulle hittades ej`,deepLinkFetchFailed:`Kunde inte ladda rulle — försök igen`,spoolArchived:`Rulle arkiverad`,spoolRestored:`Rulle återställd`,kProfileSaveFailed:`K-profilinställningar kunde inte sparas`,syncWeightSpoolNotFound:`Rulle hittades inte — den kan ha tagits bort`,syncWeightSpoolmanUnreachable:`Spoolman är otillgänglig — försök igen senare`,syncWeightFailed:`Kunde inte synkronisera vikt`,spoolmanUnreachable:`Spoolman kan ej nås — försök igen senare`,deleteSpoolNotFound:`Rulle hittades inte — den kan redan ha tagits bort`,deleteFailed:`Kunde inte ta bort rulle`,archiveSpoolNotFound:`Rulle hittades inte — den kan redan ha tagits bort`,archiveFailed:`Kunde inte arkivera rulle`,restoreSpoolNotFound:`Rulle hittades inte — den kan redan ha tagits bort`,restoreFailed:`Kunde inte återställa rulle`,saveFailed:`Kunde inte spara ändringar`,tagClearFailed:`Kunde inte rensa tagg`,deleteConfirm:`Är du säker på att du vill ta bort denna rulle? Detta kan inte ångras.`,archiveConfirm:`Är du säker på att du vill arkivera denna rulle?`,advancedSettings:`Avancerade inställningar`,filamentInfoTab:`Filamentinformation`,paProfileTab:`PA-profil`,colorAndCostTab:`Färg & kostnad`,printersTab:`Skrivare`,filamentInfo:`Filament`,additional:`Ytterligare`,loadingPresets:`Laddar molnförinställningar…`,cloudConnected:`Moln anslutet`,cloudNotConnected:`Moln ej anslutet (använder standard)`,recentColors:`Senaste`,searchColors:`Sök färger...`,searchResults:`Sökresultat`,allColors:`Alla färger`,commonColors:`Vanliga färger`,showLess:`Visa färre`,showAll:`Visa alla`,noColorsFound:`Inga färger matchar din sökning`,noResults:`Inga matchningar hittade`,extraColorsLabel:`Extra färger`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Klistra in 2 till 8 hex-stoppar, åtskilda av kommatecken. Renderas som en gradient.`,extraColorsInvalid:`Ignorerade ogiltiga hex: {{tokens}}`,colorEffectLabel:`Effekt`,colorEffect:{none:`Ingen`,sparkle:`Gnistrande`,wood:`Trä`,marble:`Marmor`,glow:`Lysande`,matte:`Matt`,silk:`Silke`,galaxy:`Galax`,rainbow:`Regnbåge`,metal:`Metall`,translucent:`Genomskinlig`,gradient:`Gradient`,dualColor:`Dubbelfärg`,triColor:`Trippelfärg`,multicolor:`Multifärg`},selectMaterialFirst:`Välj ett material först i fliken Filamentinformation.`,noPrintersConfigured:`Inga skrivare konfigurerade. Lägg till skrivare för att använda PA-profiler.`,matchingFilter:`Matchande`,anyBrand:`Alla märken`,anyVariant:`Alla varianter`,autoSelect:`Auto-välj`,matches:`matchningar`,match:`matchning`,noMatches:`Inga matchningar`,connected:`Ansluten`,offline:`Offline`,printerOffline:`Skrivaren är offline. Anslut för att visa kalibreringsprofiler.`,noKProfilesMatch:`Inga K-profiler matchar det valda filamentet.`,leftNozzle:`Vänster munstycke`,rightNozzle:`Höger munstycke`,profilesSelected:`kalibreringsprofil(er) valda`,filamentPreset:`Filamentförinställning`,presetUseSpoolDefault:`Använd rullens förinställning`,presetInherited:`ärvd`,presetOverride:`åsidosättning`,presetNeedsModel:`Den här skrivaren har inte rapporterat sin modell än, så den kan inte ha en egen förinställning.`,autoMatchPresets:`Auto-matcha`,autoMatchPresetsHint:`Hitta varianten av den här rullens förinställning som namnger varje modell`,kProfilesPerPrinter:`K-profiler`,kProfileNotSet:`Ej inställt`,kProfileFlowMismatch:`Denna profil mättes på ett {{profile}} munstycke men ett {{fitted}} munstycke är monterat, så det kommer inte att appliceras`,nozzle:`Munstycke`,unknownModel:`Okänd modell`,onePrinter:`1 skrivare`,nPrinters:`{{n}} skrivare`,filamentPresetsLoadFailed:`Det gick inte att ladda denna rullens per-modell-förinställningar`,filamentPresetSaveFailed:`Det gick inte att spara per modell-förinställningarna`,totalInventory:`Total inventarium`,totalConsumed:`Totalt förbrukat`,byMaterial:`Efter material`,inPrinter:`I skrivare`,lowStock:`Lågt lager`,sinceTracking:`Sedan räkning startade`,resetConsumedCounter:`Återställ räknare`,resetConsumedCounterTooltip:`Nollställ den förbrukade gramräknaren för denna rulle. Återstående vikt ändras ej.`,resetConsumedCounterConfirm:`Återställ denna rulles förbrukade gramräknare till 0? Framtida utskrifter kommer att räknas från noll igen. Rullen själv, dess återstående viktberäkning och dina inställningar ändras ej.`,resetAllConsumedCounters:`Återställ alla räknare`,resetAllConsumedCountersTooltip:`Nollställ den förbrukade gramräknaren på varje rulle. Återstående vikter ändras inte.`,resetAllConsumedCountersConfirm:`Återställ den förbrukade gramräknaren till 0 på alla {{count}} rullar (inklusive arkiverade)? Detta rensar "Totalt förbrukat"-statistiken så att framtida utskrifter räknas från noll. Rullar och återstående vikter ändras ej.`,consumedCounterReset:`Räknare återställd`,allConsumedCountersReset:`Räknare återställd för {{count}} rulle(r)`,resetConsumedCounterFailed:`Kunde inte återställa räknare`,loadedInAms:`Laddad i AMS/Ext`,remaining:`Återstående`,weightCheck:`Viktkontroll`,lastWeighed:`Senast vägd`,neverWeighed:`Aldrig vägd`,search:`Sök rullar...`,showing:`Visar`,to:`till`,of:`av`,show:`Visa`,spools:`rullar`,spool:`rulle`,page:`Sida`,noSpoolsMatch:`Inga resultat hittade`,noSpoolsMatchDesc:`Försök justera din sökning eller filter för att hitta det du letar efter.`,active:`Aktiv`,archived:`Arkiverad`,all:`Alla`,used:`Använd`,new:`Ny`,clearFilters:`Rensa filter`,table:`Tabell`,cards:`Kort`,net:`Nät`,groupSimilar:`Gruppera`,groupedSpools:`{{count}} identiska rullar`,groupedRows:`rader`,columns:`Kolumner`,configureColumns:`Konfigurera kolumner`,configureColumnsDesc:`Dra för att omordna kolumner eller använd pilarna. Växla synlighet med ögonikonen.`,visible:`synlig`,reset:`Återställ`,cancel:`Avbryt`,applyChanges:`Tillämpa ändringar`,moveUp:`Flytta upp`,moveDown:`Flytta ner`,hideColumn:`Dölj kolumn`,showColumn:`Visa kolumn`,linkToSpool:`Länka till rulle`,tagLinked:`Tagg länkad till rulle`,tagLinkFailed:`Kunde inte länka tagg`,tagAlreadyLinked:`Tagg är redan länkad till en annan rulle #{{id}}`,unknownTag:`Okänd RFID-tagg upptäckt`,usageHistory:`Användningshistorik`,noUsageHistory:`Ingen användning registrerad än`,printName:`Utskriftsnamn`,weightConsumed:`Vikt förbrukat`,clearHistory:`Rensa`,historyCleared:`Användningshistorik rensad`,fillSourceLabel:`(Inv)`,lowStockThresholdError:`Tröskelvärdet måste vara mellan 0,1 och 99,9`,assignMismatchTitle:`Materialfelmatchning`,assignMismatchMessage:`Det valda rullmaterialet "{{spoolMaterial}}" matchar inte fackmaterialet "{{trayMaterial}}" för {{location}}. Tilldela ändå?`,assignMismatchConfirm:`Tilldela ändå`,assignPartialMismatchMessage:`Rullmaterialet "{{spoolMaterial}}" liknar "{{trayMaterial}}" i {{location}} men matchar inte exakt. Vill du fortsätta?`,assignProfileMismatchMessage:`Rullprofilen "{{spoolProfile}}" matchar inte fackprofilen "{{trayProfile}}" i {{location}}. Vill du fortsätta?`,assignReconfigureNote:`AMS-facket kommer att omkonfigureras för att använda rullens profil.`,spoolmanFilamentCatalog:`Spoolman Filamentkatalog`,pickFromSpoolmanCatalog:`Välj från Spoolman-katalog…`,spoolmanFilamentSelected:`Filament valt från Spoolman-katalog`,spoolmanFilamentUnlinked:`Filamentkataloglänk rensad`,noSpoolmanFilaments:`Inga filament hittade i Spoolman-katalog`,spoolmanFilamentColorSwatch:`Filamentfärg`,spoolWeightManagedBySpoolman:`Tom rullvikt hanteras per filamenttyp i Spoolman`,spoolmanCatalogLoadFailed:`Kunde inte ladda Spoolman filamentkatalog`},timelapse:{title:`Timelapse`,create:`Skapa timelapse`,download:`Ladda ner`,delete:`Ta bort`,preview:`Förhandsvisning`,frameRate:`Bildfrekvens`,quality:`Kvalitet`,processing:`Bearbetar...`,noTimelapses:`Inga timelapse tillgängliga`},ams:{title:`AMS`,slot:`Fack`,empty:`Tomt`,emptySlot:`Tomt fack`,slotEmpty:`Tomt`,slotUnconfigured:`?`,emptySlotReset:`Inget filament tilldelat`,unknown:`Okänd`,humidity:`Luftfuktighet`,temperature:`Temperatur`,filamentType:`Filamenttyp`,filamentColor:`Färg`,remaining:`Återstående`,history:`AMS-historik`,noHistory:`Ingen historik tillgänglig`,configureSlot:`Konfigurera fack`,externalSpool:`Extern rulle`,profile:`Profil`,kFactor:`K-faktor`,kFactorShort:`K`,fill:`Fyll`,configure:`Konfigurera`,used:`använt`,remainingUnit:`återstående`},printModal:{variants:{editNote:`Dessa alternativ sattes när jobbet köades. Avbryt och köa om för att ändra dem.`,title:`Skrivaralternativ`,help:`Ett jobb, en köplats. Den första matchande skrivaren som blir ledig kör sin fil.`,unknownModel:`Okänd modell`,plateFor:`Platta för {{filename}}`,moveUp:`Flytta upp`,moveDown:`Flytta ner`,queued:`Köat med {{count}} alternativ`},selectPrinter:`Välj skrivare`,selectPlate:`Välj platta`,filamentMapping:`Filamentmappning`,useArchiveMapping:`Mappning`,useArchiveMappingTooltip:`Välj alla fack från AMS-mappningen som sparades med detta arkiv (från slicern), istället för att matcha efter typ/färg.`,clickToChangeSlot:`Klicka för att ändra facktilldelning`,reRead:`Läs om`,plateN:`Platta {{n}}`,plateFilamentsUnreadable:`Filamenten för en vald platta kunde inte läsas, så den kan inte mappas. Avmarkera den för att köa de andra.`,totalCost:`Total kostnad:`,slotRemainingShort:` - {{grams}}g kvar`,printSettings:`Utskriftsinställningar`,bedLeveling:`Byggplattsnivåinställning`,flowCalibration:`Flödeskalibrering`,vibrationCalibration:`Vibrationskalibrering`,layerInspection:`Förstaskiktsinspektion`,timelapse:`Timelapse`,cancel:`Avbryt`,noPrintersAvailable:`Inga skrivare tillgängliga`,printerBusy:`Skrivaren är upptagen`,printerOffline:`Skrivaren är offline`,sameTypeDifferentColor:`Samma typ, olika färg`,filamentTypeNotLoaded:`Filamenttyp inte laddad`,statusReady:`Redo`,statusColorMismatch:`Färg matchar ej`,statusTypeNotFound:`Typ hittades ej`,requiredTooltip:`Kräver: {{name}} - {{color}}`,manuallySelected:`Manuellt vald`,autoMatched:`Auto-matchad`,selectSlot:`Välj fack`,exactColorMatch:`Exakt färgmatchning`,slotForFilament:`Skrivarfack för {{name}}`,overrideForFilament:`Åsidosätt filament för {{name}}`,sameTypeDifferentColorDetail:`Samma typ, annan färg: behöver {{required}}, facket har {{loaded}}`,requiredTypeNotInPrinter:`Krävd filamenttyp hittades inte i skrivaren.`,whenToPrint:`När utskriften ska starta`,asap:`Så snart som möjligt`,queue:`Kö`,schedule:`Schemalägg`,dateTime:`Datum & tid`,invalidDateTime:`Ange ett giltigt datum och tid`,openCalendar:`Öppna kalender`,requireManualStart:`Kräv manuell start`,requirePreviousSuccess:`Starta endast om föregående utskrift lyckades`,autoOffAfter:`Stäng av skrivaren när den är klar`,helpAsap:`Utskriften kommer att läggas till i toppen av kön och starta så snart en lämplig skrivare är ledig.`,helpSchedule:`Utskriften kommer att starta vid den schemalagda tiden om skrivaren är ledig. Om den är upptagen kommer den att vänta tills skrivaren blir tillgänglig.`,helpQueue:`Utskriften kommer att läggas till i slutet av kön.`,leftNozzle:`V`,rightNozzle:`H`,leftNozzleTooltip:`Vänster munstycke`,rightNozzleTooltip:`Höger munstycke`,ftsSameInletHint:`Alla filament för denna print sitter på filamentspårväljare IN-{{inlet}}. Växlingen mellan filament på samma ingång är långsammare — flytta den ena till en AMS på den andra ingången för att snabba upp växlingen.`,rackPosition:`Hyllposition`,rackPositionTooltip:`Vilket munstycke på hyllan skriver ut detta filament? Positionerna är numrerade som på skrivaren..`,rackEmptyPosition:`Denna hyllposition är tom`,rackWrongNozzle:`Har {{has}} munstycke; detta filament behöver {{needs}}`,filamentOverride:`Åsidosätt filament`,filamentOverrideHint:`Välj att åsidosätta filament för modellbaserad tilldelning. Schemaläggaren kommer att matcha mot dina valda filament istället för de ursprungliga 3MF-värdena.`,originalFilament:`Original`,overrideWith:`Åsidosätt med`,resetToOriginal:`Återställ till original`,insufficientFilamentTitle:`Otillräckligt filament`,waitingForAmsStatus:`Väntar på AMS-status från {{printer}}…`,insufficientFilamentMessage:`Vissa tilldelade rullar har mindre filament kvar än denna utskrift behöver:`,insufficientFilamentLine:`{{printer}} - {{slot}}: behöver {{required}}g, återstående {{remaining}}g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: behöver {{required}}g, {{remaining}}g tillgängligt över matchande rullar (AMS-filamentbackup)`,printAnyway:`Skriv ut ändå`,forceColorMatch:`Tvinga färgmatchning`,staggerPrinterStarts:`Förskjut skrivarstart`,staggerGroupSize:`Gruppstorlek`,staggerInterval:`Intervall (min)`,staggerPreview:`{{printers}} skrivare → {{groups}} grupper om {{size}}, startar var {{interval}} minut`,staggerLastGroup:`sista grupp: {{count}}`,staggerTotal:`totalt: {{minutes}} min`,staggerToPrinters:`Förskjut till {{count}} skrivare`,gcodeInjection:`Injicera auto-utskrifts-G-kod`,insufficientBudget:`Otillräcklig budget`,unlimitedNoBudget:`Obgränsad – ingen budgetgräns är inställd.`,noPrintableCostCenters:`Inget aktivt kostnadsställe är tillgängligt för utskrift. Be en administratör att ge dig utskriftsåtkomst.`},backup:{includesEncryptionKey:`Lokala säkerhetskopior inkluderar MFA-krypteringsnyckelfilen (DATA_DIR/.mfa_encryption_key), så en säkerhetskopie-ZIP är självständig. Behandla ZIP-filen som känslig — vem som helst med filen kan dekryptera OIDC-klienthemligheterna och TOTP-hemligheterna som lagras inuti.`,title:`Säkerhetskopia & Återställning`,createBackup:`Skapa säkerhetskopia`,restoreBackup:`Återställ säkerhetskopia`,restoreDescription:`Ersätt all data från en säkerhetskopia`,downloadBackup:`Ladda ner säkerhetskopia`,uploadBackup:`Ladda upp säkerhetskopia`,lastBackup:`Senaste säkerhetskopia`,autoBackup:`Automatisk säkerhetskopia`,backupNow:`Säkerhetskopiera nu`,restoreWarning:`Varning: Återställning av en säkerhetskopia kommer att skriva över all nuvarande data.`,includeArchives:`Inkludera arkiv`,includeSettings:`Inkludera inställningar`,includeProfiles:`Inkludera profiler`,backupSuccess:`Säkerhetskopia skapad`,restoreSuccess:`Säkerhetskopia återställd`,backupFailed:`Kunde inte skapa säkerhetskopia`,restoreFailed:`Kunde inte återställa säkerhetskopia`,restoreNote:`Virtuell skrivare kommer att stoppas under återställning`,githubBackup:`Git-säkerhetskopia`,enabled:`Aktiverad`,cloudLoginRequired:`Inloggning till Bambu Cloud krävs. Logga in under Profiler → Molnprofiler för att aktivera GitHub-säkerhetskopia.`,cloudLoginRequiredShort:`Molninloggning krävs`,githubDescription:`Synkronisera dina profiler automatiskt till ett privat GitHub-kodförråd för säkerhetskopiering och versionshistorik.`,repoIsPrivate:`Kodförrådet är privat — säkert att säkerhetskopiera till.`,repoIsPublicWarning:`Kodförrådet är PUBLIKT. Bambuddy-säkerhetskopior inkluderar MQTT-uppgifter, Home Assistant-tokens, Prometheus-tokens, din Bambu Cloud-e-post och skrivaråtkomstkoder via K-profiler. Sparning blockeras tills du gör repositoryt privat i din leverantörs inställningar.`,repoVisibilityUnknown:`Kunde inte fastställa repositoryns synlighet. Bambuddy vägrar att säkerhetskopiera till något som inte bekräftats som privat; sparande kommer att blockeras.`,repositoryUrl:`Kodförråd-URL`,repoUrlPlaceholderGitHub:`https://github.com/användarnamn/repo-namn`,repoUrlPlaceholderGitea:`https://gitea.example.com/användarnamn/repo-namn`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/användarnamn/repo-namn`,repoUrlPlaceholderGitLab:`https://gitlab.com/användarnamn/repo-namn`,allowInsecureHttp:`Tillåt osäker HTTP`,allowInsecureHttpHint:`Aktivera för självhostade instanser på privata nätverk utan TLS`,personalAccessToken:`Personlig åtkomsttoken`,tokenSaved:`(sparad)`,enterNewToken:`Ange ny token för att uppdatera`,tokenHintGitHub:`Finkornig token med Contents-läs- och skrivåtkomst, eller en klassisk token med repo-omfång.`,tokenHintGitLab:`Token med api-omfång, eller read_repository och write_repository tillsammans.`,tokenHintGitea:`Token med write:repository-omfång.`,tokenHintForgejo:`Token med write:repository-omfång. En token begränsad till detta enda kodförråd räcker.`,branch:`Gren`,provider:`Git-leverantör`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Endast manuell`,hourly:`Varje timme`,daily:`Dagligen`,weekly:`Veckovis`,includeInBackup:`Inkludera i säkerhetskopia`,kProfiles:`K-profiler`,kProfilesDescription:`Tryckförskottskalibrering från anslutna skrivare`,noPrintersConnected:`Inga skrivare anslutna`,printersConnected:`{{connected}}/{{total}} anslutna`,cloudProfiles:`Molnprofiler`,cloudProfilesDescription:`Filament-, skrivar- och processförinställningar från Bambu Cloud och Orca Cloud`,cloudProfilesAccounts:`Anslutna konton — Bambu Cloud: {{bambu}}, Orca Cloud: {{orca}}`,appSettings:`App-inställningar`,appSettingsDescription:`Bambuddy-konfiguration (komplett databas)`,spoolInventory:`Rullinventarium`,spoolInventoryDescription:`Filamentrullar, användningshistorik och kostnadsspårning`,printArchives:`Utskriftsarkiv`,printArchivesDescription:`Utskriftshistorik-metadata (inga gcode/3MF-filer)`,lastBackupAt:`Senaste säkerhetskopia:`,noBackupsYet:`Inga säkerhetskopior än`,next:`Nästa:`,startingBackup:`Startar säkerhetskopia...`,test:`Test`,enableBackup:`Aktivera säkerhetskopia`,testConnection:`Testa anslutning`,enterRepoUrl:`Ange kodförråds-URL`,enterRepoAndToken:`Ange kodförråds-URL och åtkomsttoken`,repoRequired:`Kodförråds-URL krävs`,tokenRequired:`Åtkomsttoken krävs`,githubBackupEnabled:`GitHub-säkerhetskopia aktiverad`,tokenUpdated:`Token uppdaterad`,settingsSaved:`Inställningar sparade`,failedToSave:`Kunde inte spara: {{message}}`,backupCompleteFiles:`Säkerhetskopia slutförd - {{count}} filer uppdaterade`,backupSkippedNoChanges:`Säkerhetskopia hoppade över - inga ändringar`,backupFailed2:`Kunde inte skapa säkerhetskopia: {{message}}`,clearedLogs:`Rensade {{count}} loggar`,failedToClearLogs:`Kunde inte rensa loggar: {{message}}`,restoreFromGit:{button:`Återställ från Git`,title:`Återställ från Git-säkerhetskopia`,subtitle:`Välj en commit och välj vad som ska återställas`,commitLabel:`Säkerhetskopie-commit`,latestCommit:`Senaste säkerhetskopia (grenens topp)`,categoriesLabel:`Vad som ska återställas`,inspecting:`Läser säkerhetskopieinnehåll...`,itemCount:`{{count}} i säkerhetskopian`,overwriteLabel:`Skriv över befintliga poster`,overwriteOn:`Befintliga poster kommer att uppdateras från säkerhetskopian.`,overwriteOff:`Endast saknade poster läggs till; befintliga lämnas orörda.`,selectedCount:`{{count}} valda`,restoring:`Återställer...`,confirmTitle:`Återställ från säkerhetskopia?`,confirmMessage:`De valda kategorierna kommer att återställas från denna commit. Saknade poster läggs till; befintliga poster förblir oförändrade.`,confirmMessageOverwrite:`De valda kategorierna kommer att återställas från denna commit, och skriva över poster som redan finns lokalt. Detta kan inte ångras.`,kprofilesOverwriteCaveat:`K-profiler är undantaget: att skriva till ett fack ersätter alltid kalibreringen på skrivaren.`,tally:`{{restored}} återställda, {{skipped}} hoppade över, {{failed}} misslyckades`,reloadHint:`Ladda om Bambuddy så att den återställda datan visas överallt.`,partialHint:`Kategorierna som listas ovan är klara och på disken. Eventuella saknade kategorier kördes inte.`,failed:`Kunde inte återställa.`,loadFailed:`Kunde inte läsa säkerhetskopiekodförrådet.`,details:{notPresent:`Finns inte i denna säkerhetskopie-commit`,unreadableJson:`Oläsliga JSON: {{paths}}`,settingsNoPayload:`Inga inställningar i nyttolast`,settingsCredentialsWillSkip:`{{count}} uppgift(er) av typen lösenord kommer att hoppas över`,settingsCompanionWillSkip:`{{count}} uppgift(er) av typen lösenord kommer att hoppas över, och {{companion}} växlar som beror på dem kommer att lämnas av`,settingsCompanionOnlyWillSkip:`{{companion}} växlar kommer att lämnas av — den uppgift som var och en behöver kan inte återställas från en säkerhetskopia`,spoolsUsageCount:`inklusive {{count}} användningspost(er)`,archivesMetadataOnly:`Endast metadata — 3MF-filer och minibilder finns inte i en Git-säkerhetskopia`,kprofilesPrinterCount:`över {{count}} skrivare`},notes:{noData:`Ingen data av denna typ i denna säkerhetskopia`,archivesPrinterMissing:`Vissa arkiv refererade till skrivare som inte längre finns — länk rensad`,archivesProjectMissing:`Vissa arkiv refererade till projekt som inte längre finns — länk rensad`,archivesOwnerCleared:`Vissa arkiv refererade till användare som inte längre finns — ägare rensad, så de är synliga endast för användare med behörigheten archives:read_all tills en admin tilldelar dem på nytt`,archivesOwnerUnmatched:`Vissa arkiv namnger en ägare som denna instans inte har — ägare rensad snarare än gissad från säkerhetskopians användar-ID, så de är synliga endast för användare med behörigheten archives:read_all tills en admin tilldelar dem på nytt`,archivesOwnerUnknown:`Vissa arkiv återställdes utan en ägare — denna säkerhetskopia registrerar ingen, så de är synliga endast för användare med behörigheten archives:read_all tills en admin tilldelar dem på nytt`,archivesUndeleted:`Arkiv som tagits bort sedan säkerhetskopian är synliga igen — skriv över var aktiverad`,archivesMetadataOnly:`Återställda arkiv innehåller endast metadata — 3MF- och minibildfiler finns inte i en Git-säkerhetskopia`,spoolUsageUnresolved:`{{count}} användningspost(er) hoppade över — deras rulle finns inte i denna säkerhetskopias rulllista, så det finns inget att koppla dem till.`,spoolUsageUnlinked:`{{count}} användningspost(er) återställda utan sin utskriftshistorik-länk — välj Utskriftsarkiv tillsammans med Rullinventering för att behålla den.`,spoolTagKept:`{{count}} rulletagg(ar) lämnade som de är — säkerhetskopian skulle ha rensat en tagg som sedan dess skannats, eller flyttat en till en andra rulle.`,settingsCredentialsSkipped:`{{count}} uppgift(er) av typen lösenord hoppade över — ange hemligheter manuellt igen`,settingsAuthSkipped:`{{count}} autentiseringsinställning(ar) hoppade över — ändra dem i Inställningar > Autentisering så att uteslutningskontrollerna fortfarande körs`,settingsCompanionSkipped:`{{keys}} lämnade avstängda — den uppgift som var och en behöver kan inte återställas från en säkerhetskopia och denna instans har ingen lagrad, så att slå på dem skulle lämna integrationen oautentiserad`,settingsMqttRelayFailed:`MQTT-inställningar återställda, men reläet kunde inte återanslutas — starta om Bambuddy`,kprofilesAlwaysOverwrite:`K-profiler skriver alltid över det matchande facket på skrivaren`,kprofilesAckUnreliable:`En skrivare som inte svarar räknas ändå som återställd — verifiera profilerna på skrivaren`,kprofilesPrinterMissing:`Ingen skrivare med serienummer {{serial}} — hoppade över`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) är inte ansluten — hoppade över`,kprofilesUnknownNozzle:`Oväntad munstyckesdiameter {{nozzle}} för {{serial}} — skickad som den är`,kprofilesUnmatched:`{{count}} profil(er) för {{nozzle}} hade ingen motsvarighet på {{printer}} — lades till som nya profiler`,kprofilesSendFailed:`Kunde inte skicka {{nozzle}}-profiler till {{printer}} ({{serial}})`,kprofilesRefused:`{{printer}} ({{serial}}) vägrade {{nozzle}}-profilerna: {{reason}}`,kprofilesStepFailed:`K-profil-steget kunde inte slutföras — {{reason}}. Allt som återställdes före det är fortfarande sparat.`}},history:`Historik`,clear:`Rensa`,date:`Datum`,status:`Status`,trigger:`Typ`,triggers:{manual:`Säkerhetskopia (manuell)`,scheduled:`Säkerhetskopia (schemalagd)`,restore:`Återställning`},commit:`Commit`,localBackup:`Lokal säkerhetskopia`,localBackupDescription:`Skapa en komplett säkerhetskopia av din Bambuddy-data inklusive databas, arkiv, uppladdningar och alla filer.`,downloadBackupLabel:`Ladda ner säkerhetskopia`,completeBackupZip:`Komplett säkerhetskopia: databas + alla filer (ZIP)`,download:`Ladda ner`,preparingBackup:`Förbereder säkerhetskopia...`,creatingArchive:`Skapar säkerhetskopiearkiv... Detta kan ta en stund för stora arkiv.`,downloadingFile:`Laddar ner säkerhetskopia...`,backupDownloaded:`Säkerhetskopia nedladdad`,failedToCreateBackup:`Kunde inte skapa säkerhetskopia: {{message}}`,restore:`Återställ`,restoreReplacesAll:`Återställning ersätter all data.`,restoreReplacesAllDetail:`Din nuvarande databas och filer kommer att ersättas fullständigt. En omstart krävs efter återställning.`,restoreConfirmTitle:`Återställ säkerhetskopia`,restoreConfirmMessage:`Är du säker på att du vill återställa från "{{filename}}"? Detta kommer att ersätta din nuvarande databas och alla filer fullständigt. Applikationen måste startas om efter återställning.`,restoreConfirmButton:`Återställ säkerhetskopia`,uploadingFile:`Laddar upp säkerhetskopia...`,backupRestoredRestart:`Säkerhetskopia återställd. Starta om Bambuddy.`,failedToRestore:`Kunde inte återställa säkerhetskopia. Kontrollera filformatet.`,reloadNow:`Ladda om nu`,creatingBackup:`Skapar säkerhetskopia`,restoringBackup:`Återställer säkerhetskopia`,preparing:`Förbereder...`,processing:`Bearbetar...`,doNotClosePage:`Stäng inte denna sida eller navigera bort. Denna operation kan ta flera minuter för stora säkerhetskopior.`,restoring:`Återställer...`,restoreComplete:`Återställning slutförd`,restoreFailed2:`Kunde inte återställa`,importSettings:`Importera inställningar från en säkerhetskopia`,pleaseWaitRestoring:`Vänligen vänta medan din data återställs`,selectBackupFile:`Klicka för att välja säkerhetskopia (.json eller .zip)`,duplicateHandling:`Hur dubbletter hanteras:`,matchPrinters:`Skrivare`,matchPrintersBy:`matchade efter serienummer`,matchSmartPlugs:`Kontakter`,matchSmartPlugsBy:`matchade efter IP-adress`,matchNotificationProviders:`Notisleverantörer`,matchNotificationProvidersBy:`matchade efter namn`,matchFilaments:`Filament`,matchFilamentsBy:`matchade efter namn + typ + märke`,matchArchives:`Arkiv`,matchArchivesBy:`matchade efter innehållshash (hoppas alltid över)`,matchPendingUploads:`Väntande uppladdningar`,matchPendingUploadsBy:`matchade efter filnamn`,matchSettingsTemplates:`Inställningar & mallar`,matchSettingsTemplatesBy:`skrivs alltid över`,replaceExisting:`Ersätt befintlig data`,keepExisting:`Behåll befintlig data`,overwriteDescription:`Skriv över objekt som redan finns med säkerhetskopiedata`,keepDescription:`Endast återställ objekt som inte redan finns`,overwriteCaution:`Försiktighet:`,overwriteWarning:`Att skriva över kommer att ersätta dina nuvarande konfigurationer med data från säkerhetskopian. Skrivaråtkomstkoder skrivs aldrig över av säkerhetskäl.`,cancel:`Avbryt`,processingBackup:`Bearbetar säkerhetskopia...`,itemsRestored:`Objekt återställda`,itemsSkipped:`Objekt hoppades över`,restored:`Återställd`,skippedAlreadyExist:`Hoppade över (finns redan)`,filesCategory:`Filer (3MF, minibilder, etc.)`,andMore:`...och {{count}} till`,newApiKeysGenerated:`Nya API-nycklar genererade`,keysShownOnce:`Dessa nycklar visas endast en gång. Kopiera dem nu!`,copy:`Kopiera`,noDataFound:`Ingen data att återställa hittades i säkerhetskopian.`,close:`Stäng`,scheduledBackup:`Schemalagda säkerhetskopior`,scheduledBackupDescription:`Skapa säkerhetskopieögonblicksbilder automatiskt enligt ett schema. Utdata-katalogen kan monteras till en NAS eller extern lagring.`,frequency:`Frekvens`,backupTime:`Tid`,retention:`Bevarande`,retentionDescription:`Antal säkerhetskopior att behålla`,outputPath:`Utdata-sökväg`,outputPathPlaceholder:`Standard: {{path}}`,outputPathDescription:`Lämna tom för standardplats`,runNow:`Kör nu`,backupFiles:`säkerhetskopior`,noScheduledBackups:`Inga säkerhetskopior än`,deleteBackup:`Ta bort`,deleteBackupConfirm:`Ta bort denna säkerhetskopia?`,backupRunning:`Säkerhetskopiering pågår...`,scheduledBackupComplete:`Säkerhetskopia slutförd`,scheduledBackupFailed:`Kunde inte skapa säkerhetskopia`,nextBackup:`Nästa säkerhetskopia`,backupSize:`Storlek`,localTimeHint:`Lokal tid ({{tz}})`,defaultPathLabel:`Standard:`,pathCheck:{title:`Bambuddy kan inte skriva till denna katalog`,howToFix:`Så här åtgärdar du:`,sandboxed:`Bambuddy-tjänsten kan inte skriva till {{path}}. Dess systemd-enhet körs med ProtectSystem=strict, vilket gör varje katalog utanför installations-, data- och loggkatalogerna skrivskyddade för tjänsten — även om du själv kan skriva till den från ditt eget skal.`,read_only:`{{path}} är på ett skrivskyddat filsystem.`,permission_denied:`Bambuddy har inte behörighet att skriva till {{path}}. Kontrollera katalogägaren och behörigheterna.`,no_space:`Filsystemet som innehåller {{path}} är fullt.`,not_a_directory:`{{path}} finns men är inte en katalog.`,missing:`{{path}} finns inte och kunde inte skapas.`,error:`Bambuddy kan inte skriva till {{path}}.`,ephemeralTitle:`Dessa säkerhetskopior kommer inte att överleva en container-omstart`,container_ephemeral:`{{path}} är inne i Bambuddy-containern, inte på värden. Säkerhetskopior som skrivs dit försvinner när containern skapas om. Montera katalogen från värden:`},categories:{settings:`Inställningar`,notification_providers:`Notisleverantörer`,notification_templates:`Notismallar`,smart_plugs:`Kontakter`,printers:`Skrivare`,filaments:`Filament`,maintenance_types:`Underhållstyper`,archives:`Arkiv`,projects:`Projekt`,pending_uploads:`Väntande uppladdningar`,external_links:`Externa länkar`,api_keys:`API-nycklar`}},tags:{title:`Taggar`,addTag:`Lägg till tagg`,editTag:`Redigera tagg`,deleteTag:`Ta bort tagg`,tagName:`Taggnamn`,tagColor:`Taggfärg`,noTags:`Inga taggar`,deleteConfirm:`Är du säker på att du vill ta bort denna tagg?`,manageTags:`Hantera taggar`},uploadModal:{title:`Ladda upp 3MF-filer`,dragDrop:`Dra och släpp .3mf-filer här`,or:`eller`,browseFiles:`Bläddra bland filer`,extractionInfo:`Skrivarmodellen kommer automatiskt att extraheras från 3MF-filens metadata.`,uploaded:`uppladdade`,failed:`misslyckades`,uploading:`Laddar upp...`,upload:`Ladda upp`,uploadFailed:`Kunde inte ladda upp`},editArchive:{title:`Redigera arkiv`,name:`Namn`,namePlaceholder:`Utskriftsnamn`,printer:`Skrivare`,noPrinter:`Ingen skrivare`,project:`Projekt`,noProject:`Ingen projekt`,itemsPrinted:`Antal utskrivna objekt`,itemsPrintedHelp:`Antal objekt som producerats i detta utskriftsjobb`,filamentUsed:`Filament använt (g)`,filamentUsedPlaceholder:`t.ex. 46,16`,filamentUsedHelp:`Ställ in detta manuellt när en utskrift arkiveras utan sin 3MF, så att den fortfarande räknas mot filamenttotalen. Om man skannar om ett arkiv som har sin 3MF läser man tillbaka siffran från filen.`,notes:`Anteckningar`,notesPlaceholder:`Lägg till anteckningar om denna utskrift...`,externalLink:`Extern länk`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Länk till Printables, Thingiverse eller annan källa`,tags:`Taggar`,tagsPlaceholder:`Lägg till taggar...`,addMoreTags:`Lägg till fler taggar...`,matchingTags:`Matchande "{{query}}"`,existingTags:`Befintliga taggar`,clickToAdd:`(klicka för att lägga till)`,status:`Status`,failureReason:`Orsak till fel`,selectReason:`Välj orsak...`,photos:`Bilder av utskriftsresultat`,photosHelp:`Klicka på + för att lägga till bilder av ditt utskriftsresultat`,printResult:`Utskriftsresultat`,saving:`Sparar...`,failureReasons:{adhesionFailure:`Vidhäftningsfel`,spaghettiDetached:`Spaghetti / lossning`,layerShift:`Skiktförskjutning`,cloggedNozzle:`Igensatt munstycke`,filamentRunout:`Filament tog slut`,warping:`Förskevning`,stringing:`Trådighet`,underExtrusion:`Under-extrudering`,powerFailure:`Strömavbrott`,userCancelled:`Användare avbröt`,noStatusUpdate:`Ingen statusuppdatering mottogs`,other:`Annat`},statuses:{completed:`Slutförd`,failed:`Misslyckad`,aborted:`Avbruten`,printing:`Skriver ut`}},kProfiles:{title:`K-profiler`,noPrintersConfigured:`Inga skrivare konfigurerade`,addPrinterInSettings:`Lägg till en skrivare i Inställningar för att hantera K-profiler`,noActivePrinters:`Inga aktiva skrivare`,enablePrinterConnection:`Aktivera skrivaranslutning för att visa dess K-profiler`,loadingProfiles:`Laddar K-profiler...`,printerOffline:`Skrivare offline`,printerOfflineDesc:`Den valda skrivaren är inte ansluten. Sätt på den för att visa K-profiler.`,noMatchingProfiles:`Inga matchande profiler`,noMatchingProfilesDesc:`Inga profiler matchar dina sökvillkor`,noKProfiles:`Inga K-profiler`,noKProfilesDesc:`Inga tryckförskottsprofiler hittade för {{diameter}} mm munstycke`,createFirstProfile:`Skapa en första profil`,printer:`Skrivare`,nozzle:`Munstycke`,refresh:`Uppdatera`,addProfile:`Lägg till profil`,export:`Exportera`,import:`Importera`,select:`Välj`,selectAll:`Markera alla`,delete:`Ta bort`,searchPlaceholder:`Sök efter namn eller filament...`,allExtruders:`Alla extrudrar`,leftOnly:`Endast vänster`,rightOnly:`Endast höger`,allFlow:`Allt flöde`,hfOnly:`Endast HF`,sOnly:`Endast S`,sortName:`Sortera: Namn`,sortKValue:`Sortera: K-värde`,sortFilament:`Sortera: Filament`,leftExtruder:`Vänster extruder`,rightExtruder:`Höger extruder`,modal:{addTitle:`Lägg till K-profil`,editTitle:`Redigera K-profil`,profileName:`Profilnamn`,profileNamePlaceholder:`Min PLA-profil`,kValue:`K-värde`,kValuePlaceholder:`0,020`,kValueHelp:`Typiskt intervall: 0,01 - 0,06 för PLA, 0,02 - 0,10 för PETG`,filament:`Filament`,selectFilament:`Välj filament...`,source:{local:`Importerad`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Inbyggd`},noFilamentsHelp:`Inga filament tillgängliga. Logga in på Bambu Cloud, eller importera förinställningar under Profiler → Lokala profiler.`,searchFilaments:`Sök filament...`,noFilamentMatches:`Inga filament matchar den sökningen`,flowType:`Flödestyp`,highFlow:`Högt flöde`,standard:`Standard`,nozzleSize:`Munstyckesstorlek`,extruder:`Extruder`,extruders:`Extrudrar`,left:`Vänster`,right:`Höger`,notes:`Anteckningar (lagras lokalt)`,notesPlaceholder:`Lägg till anteckningar om denna profil...`,notesHelp:`Anteckningar sparas i Bambuddy, inte på skrivaren`,syncing:`Synkroniserar med skrivare...`,savingExtruder:`Sparar till extruder {{current}}/{{total}}...`,pleaseWait:`Vänligen vänta`},deleteConfirm:{title:`Ta bort profil`,cannotUndo:`Denna åtgärd kan inte ångras`,message:`Är du säker på att du vill ta bort "{{name}}" från skrivaren?`},bulkDelete:{title:`Ta bort profiler`,cannotUndo:`Denna åtgärd kan inte ångras`,message:`Är du säker på att du vill ta bort {{count}} valda profiler från skrivaren?`},toast:{profileSaved:`K-profil sparad`,profilesSaved:`K-profil sparad till {{count}} extrudrar`,selectAtLeastOneExtruder:`Välj minst en extruder`,selectFilament:`Välj ett filament först`,filamentNotResolvable:`Inget Bambu-filament-ID för {{name}} — skrivaren kan inte lagra en profil för den`,profileDeleted:`K-profil borttagen`,profilesDeleted:`Tog bort {{count}} profiler`,exportedProfiles:`Exporterade {{count}} profiler`,importedProfiles:`Importerade {{count}} av {{total}} profiler`,noProfilesToExport:`Inga profiler att exportera`,invalidFileFormat:`Ogiltigt filformat`,failedToParseImport:`Kunde inte tolka importfil`,failedToSaveBatch:`Kunde inte spara K-profiler`,noteSaved:`Anteckning sparad`,failedToSaveNote:`Kunde inte spara anteckning`},permission:{noRead:`Du har inte behörighet att uppdatera profiler`,noCreate:`Du har inte behörighet att lägga till profiler`,noUpdate:`Du har inte behörighet att uppdatera K-profiler`,noDelete:`Du har inte behörighet att ta bort K-profiler`,noExport:`Du har inte behörighet att exportera profiler`,noImport:`Du har inte behörighet att importera profiler`}},virtualPrinter:{title:`Virtuell skrivare`,running:`Körs`,stopped:`Stoppad`,description:{default:`Aktivera en virtuell skrivare som visas i Bambu Studio och OrcaSlicer. Filer som skickas till denna skrivare kommer att arkiveras direkt utan utskrift.`,proxy:`Aktivera en proxy som vidarebefordrar slicer-trafik till en riktig skrivare, vilket möjliggör fjärrutskrift över vilket nätverk som helst.`},enable:{title:`Aktivera virtuell skrivare`,visibleInSlicer:`Synlig som "Bambuddy" i slicer-uppäckt`,proxyingTo:`Vidarebefordrar till {{name}}`,notActive:`Inte aktiv`},model:{title:`Skrivarmodell`,description:`Välj vilken skrivarmodell som ska emuleras.`,restartWarning:`Att ändra modellen kommer att starta om den virtuella skrivaren`},accessCode:{title:`Åtkomstkod`,isSet:`Åtkomstkod är inställd`,notSet:`Ingen åtkomstkod inställd — krävs för att aktivera`,placeholder:`Ange 8-teckens kod`,placeholderChange:`Ange ny kod för att ändra`,hint:`Måste vara exakt 8 tecken. Används av slicer för autentisering.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Ärvd från mål`,derivedFromTargetHint:`Använder målskrivarens åtkomstkod. Bryggan vidarebefordrar slicer-autentisering till den riktiga skrivaren, så koderna måste matcha — redigera målskrivarens åtkomstkod för att ändra detta värde.`,reveal:`Visa åtkomstkod`,hide:`Dölj åtkomstkod`},targetPrinter:{title:`Målskrivare`,configured:`Proxy-mål konfigurerat`,notConfigured:`Ingen målskrivare vald — krävs för proxyläge`,placeholder:`Välj en skrivare...`,hint:`Välj den skrivare som slicer-trafiken ska vidarebefordras till. Skrivaren måste vara i LAN-läge.`,noPrinters:`Inga skrivare konfigurerade. Lägg till en skrivare först för att använda proxyläge.`},remoteInterface:{title:`Åsidosättning för nätverksgränssnitt`,configured:`Åsidosättning för nätverksgränssnitt aktiv`,optional:`Valfritt — använd om auto-upptäckt IP är fel (t.ex. flera nätverkskort, Docker, VPN)`,placeholder:`Auto-upptäckt (standard)...`,hint:`Åsidosätter IP-adressen som annonseras via SSDP och används i TLS-certifikatet. Användbart när Bambuddy har flera nätverksgränssnitt.`},mode:{title:`Läge`,archive:`Arkiv`,archiveDesc:`Arkivera filer omedelbart`,review:`Granskning`,reviewDesc:`Granska innan arkivering`,queue:`Kö`,queueDesc:`Arkivera och lägg till i kö`,proxy:`Proxy`,proxyDesc:`Vidarebefordra till riktig skrivare`},autoDispatch:{title:`Auto-utskick`,description:`Starta utskrifter automatiskt när de läggs till i kön. När avstängd väntar utskrifter på manuell utskickning.`},queueForceColorMatch:{title:`Tvinga färgmatchning`,description:`Vägra att skicka till en skrivare som inte har exakt filamenttyp och färg laddad. Avstängd som standard — utan detta använder kön endast modellmatchning och kan välja en skrivare med fel färg laddad.`},saveAmsMapping:{title:`Spara AMS-mappning`,description:`Bevara slicerns egna AMS-facksval (från project_file MQTT-kommando) i arkivet, så att en senare omutskrift återanvänder den exakta fysiska rullen istället för att härleda en ny från filens typ/färg. Avstängd som standard.`},gcodeInjection:{title:`G-kod-injektering`,description:`Tillämpa de modellspecifika G-kodsnuttar som konfigurerats i Inställningar på jobb från denna VP. Avstängd som standard.`},tailscaleDisabled:{title:`Tailscale-integration`,description:`Aktivera för att markera denna VP som exponerad över Tailscale. Visar värdens Tailscale-adress så att du vet vilken IP du ska klistra in i slicern. CA-import-steget är oförändrat — denna växling har ingen effekt på certifikat.`},setupRequired:{title:`Inställning krävs`,description:`Funktionen för virtuell skrivare kräver ytterligare systemkonfiguration innan den fungerar. Detta inkluderar portvidarebefordran, brandväggsregler och plattformsspecifika inställningar.`,readGuide:`Läs inställningsguiden innan du aktiverar`},archiveNameSource:{title:`Källa för arkivnamn`,description:`Välj hur nya arkiv ska namnges när filer anländer via den virtuella skrivaren. "Metadata" använder den inbäddade titeln från slicern från 3MF (standard). "Filnamn" använder filnamnet som Bambu Studio skickade via FTP. Obs: Bambu Studio skriver över det namn du skriver i dialogrutan "Skicka till skrivare" med 3MF:ens Titel-fält när sådant finns, så båda lägen producerar ofta samma sträng.`,metadata:`Metadata`,filename:`Filnamn`},caCert:{title:`Slicer-certifikat`,description:`Virtuella skrivare använder ett TLS-certifikat signerat av Bambuddy-CA. Importera detta CA-certifikat till din slicers betroda lagring en gång så att den accepterar anslutningen — ingen anledning att kopiera det från kommandoraden.`,copy:`Kopiera`,copied:`Kopierad`,download:`Ladda ner`,fingerprint:`SHA-256`},howItWorks:{title:`Hur det fungerar`,step1:`På samma subnät visas virtuella skrivare automatiskt i din slicer (Bambu Studio / OrcaSlicer) via upptäckt. Från andra nätverk lägger du till dem manuellt via IP-adress och åtkomstkod.`,step2:`I Arkiv-, Gransknings- och Kölägen, använd knappen "Skicka" i din slicer för att ladda upp 3MF-filer till Bambuddy. Slicern kommer att visa "Utskrift lyckades" — filen lagras, inte skrivs ut.`,step3:`I Proxyläge vidarebefordrar den virtuella skrivaren all trafik till en riktig skrivare — utskrifter startar omedelbart som om den vore ansluten direkt.`},status:{title:`Statusdetaljer`,printerName:`Skrivarnamn`,model:`Modell`,serialNumber:`Serienummer`,mode:`Läge`,pendingFiles:`Väntande filer`,targetPrinter:`Målskrivare`,ftpPort:`FTP-port`,mqttPort:`MQTT-port`,ftpConnections:`FTP-anslutningar`,mqttConnections:`MQTT-anslutningar`},toast:{updated:`Inställningar för virtuell skrivare uppdaterade`,failedToUpdate:`Kunde inte uppdatera inställningar`,copyFailed:`Kunde inte kopiera — försök markera texten manuellt`,accessCodeRequired:`Ange en åtkomstkod först`,targetPrinterRequired:`Välj en målskrivare först`,bindIpRequired:`Ange en bind-IP först`,accessCodeEmpty:`Åtkomstkod kan inte vara tom`,accessCodeLength:`Åtkomstkod måste vara exakt 8 tecken`,targetCodeChangedRebind:`Åtkomstkoden matchar nu den nya målskrivaren. Lägg till denna enhet igen i din slicer för att hämta den nya koden.`,created:`Virtuell skrivare skapad`,failedToCreate:`Kunde inte skapa virtuell skrivare`,deleted:`Virtuell skrivare borttagen`,failedToDelete:`Kunde inte ta bort virtuell skrivare`},list:{title:`Virtuella skrivare`,add:`Lägg till`,addFirst:`Lägg till virtuell skrivare`,empty:`Inga virtuella skrivare konfigurerade. Lägg till en för att komma igång.`},bindIp:{title:`Bind gränssnitt`,placeholder:`Välj gränssnitt...`,hint:`Nätverksgränssnitt för denna virtuella skrivare att binda till. Måste vara unikt per skrivare.`},proxy:{accessCodeHint:`I proxyläge, använd din målskrivares åtkomstkod i slicern. Anslutningen vidarebefordras transparant till den riktiga skrivaren.`},addDialog:{title:`Lägg till virtuell skrivare`,name:`Namn`,hint:`Du kan konfigurera åtkomstkod, målskrivare och andra inställningar efter skapande.`,create:`Skapa`},deleteConfirm:{title:`Ta bort virtuell skrivare`,message:`Är du säker på att du vill ta bort "{{name}}"? Detta kommer att stoppa alla tjänster för denna skrivare.`}},modelViewer:{openInSlicer:`Öppna i slicer`,openInSlicerWith:`Öppna i {{slicer}}`,moreSlicerOptions:`Fler slicer-alternativ`,openInSlicerFailed:`Kunde inte öppna i slicer`,tabs:{model:`3D-modell`},notAvailable:`ej tillgänglig`,plates:`Plattor`,allPlates:`Alla plattor`,plateNumber:`Platta {{number}}`,plateCount:`{{count}} platta`,plateCount_other:`{{count}} plattor`,objectCount:`{{count}} objekt`,objectCount_other:`{{count}} objekt`,filamentCount:`{{count}} filament`,filamentCount_other:`{{count}} filament`,eta:`Beräknad tid: {{minutes}} min`,noPreview:`Ingen förhandsvisning tillgänglig för denna fil`,pagination:{pageOf:`Sida {{current}} av {{total}}`,prev:`Föregående`,next:`Nästa`},errors:{failedToLoad:`Kunde inte ladda fil`,noMeshes:`Inga nät hittade i 3MF-fil`,unsupportedFormat:`Filformatet stöds inte`}},maintenanceDescriptions:{lubricateCarbonRods:`Applicera smörjmedel på kolstänger för jämn rörelse`,lubricateRails:`Applicera smörjmedel på linjärskenor för jämn rörelse`,cleanNozzle:`Rengör varmblock och munstycke för att förhindra igensättning`,checkBelts:`Kontrollera remspänning för noggranna utskrifter`,cleanBuildPlate:`Rengör byggplatta för bättre vidhäftning`,checkExtruder:`Kontrollera extruderkugghjul för slitage`,checkCooling:`Se till att kylfläktar fungerar korrekt`,generalInspection:`Allmän skrivarkontroll`,cleanCarbonRods:`Rengör kolstänger för att minska friktion`,lubricateSteelRods:`Applicera smörjmedel på stålstänger för jämn rörelse`,cleanSteelRods:`Rengör stålstänger för att minska friktion`,cleanLinearRails:`Torka av linjärskenor för att ta bort damm och smuts`,checkPtfeTube:`Kontrollera PTFE-rör för slitage eller skador`,replaceHepaFilter:`Byt HEPA-filter för bättre luftkvalitet`,replaceCarbonFilter:`Byt aktivt kolfilter`,lubricateLeftNozzleRail:`Smörj vänster munstyckesskena (H2-serien)`},haSensors:{label:`Sensorer`,unavailable:`Ej tillgänglig`,blocksPrints:`{{entity}} — håller på utskrifter medan larmet är aktivt`,states:{open:`Öppen`,closed:`Stängd`,unlocked:`Olåst`,locked:`Låst`,detected:`Upptäckt`,clear:`Tom`,wet:`Blöt`,dry:`Torr`,problem:`Problem`,ok:`OK`,running:`Körs`,stopped:`Stoppad`,on:`På`,off:`Av`},sectionTitle:`Home Assistant-sensorer`,add:`Lägg till sensor`,addTitle:`Lägg till Home Assistant-sensor`,editTitle:`Redigera Home Assistant-sensor`,empty:`Inga sensorer än. Binda en dörrkontakt eller termometer från Home Assistant för att visa den på ett skrivarkort.`,unknownPrinter:`Okänd skrivare`,badgeBlocks:`Håller på utskrifter`,badgeNotifies:`Notiserar`,badgeHidden:`Dold på kort`,printer:`Skrivare`,entity:`Entitet`,searchPlaceholder:`Sök entiteter...`,noEntities:`Inga matchande entiteter`,name:`Visningsnamn`,alertWhen:`Larma när`,alertNever:`Aldrig — visa endast`,alertAbove:`Ovanför`,alertBelow:`Under`,alertHint:`Larmtillståndet markerar sensorn på skrivarkortet och aktiverar alternativen nedan.`,showOnCard:`Visa på skrivarkort`,notifyOnAlert:`Skicka en notis när larmet startar`,blockPrint:`Håll köade utskrifter medan larmet är aktivt`,blockPrintHint:`Jobb förblir köade och startar automatiskt när sensorn återgår till normalt. Ignoreras medan Home Assistant är otillgänglig.`,toast:{created:`Sensor tillagd`,updated:`Sensor sparad`,deleted:`Sensor borttagen`},error:{pickEntity:`Välj en Home Assistant-entitet`,nameRequired:`Ange ett visningsnamn`,printerRequired:`Välj en skrivare`,alertRequired:`Sätt ett larmvillkor först`}},locationHaSensors:{sectionTitle:`Home Assistant-sensorer (lagringsplatser)`,sectionDescription:`Bind Home Assistant-temperatur-, luftfuktighets- eller batterisensorer till dina lagringsplatser för att visa liveavläsningar på filamentkortet och i tabellen. Endast en sensor per kategori är tillåten per plats.`,add:`Lägg till sensor`,addTitle:`Lägg till Home Assistant-sensor`,editTitle:`Redigera Home Assistant-sensor`,empty:`Inga sensorer än. Bind en temperatur- eller luftfuktighetssensor från Home Assistant för att visa den på filamentkortet.`,unknownLocation:`Okänd plats`,location:`Lagringsplats`,showOnCard:`Visa på filamentkort`,overwriteConfirm:{title:`Ersätt befintlig sensor?`,messageTemperature:`"{{location}}" har redan en temperatursensor kopplad: {{name}}. Om du fortsätter kommer den att ersättas.`,messageHumidity:`"{{location}}" har redan en luftfuktighetssensor kopplad: {{name}}. Om du fortsätter kommer den att ersättas.`,messageBattery:`"{{location}}" har redan en batterisensor kopplad: {{name}}. Om du fortsätter kommer den att ersättas.`},autoAdd:{confirmTitle:`Lägg till de andra sensorerna också?`,confirmMessage:`Bambuddy hittade också andra sensorer för denna plats. Välj vilka du också vill lägga till.`,added:`Lade också till: {{names}}`,noneFound:`Inga matchande temperatur-, luftfuktighets- eller batterisensorer hittade för denna plats.`,onlyThisOne:`Endast denna`},options:{buttonLabel:`Sensoralternativ`,title:`Platssensoralternativ`,description:`Dessa värden används när en temperatur-, luftfuktighets- eller batterisensor binds automatiskt tillsammans med den första sensorn för en plats.`,generalSettings:`Allmänna inställningar`,pollInterval:`Uppdateringsintervall (sekunder)`,pollIntervalHint:`Hur ofta Bambuddy avfrågar Home Assistant och uppdaterar sensorvärden på skärmen. Minimum 60 sekunder.`,colorizeValues:`Färga sensorvärden enligt deras larmtröskelvärden`,aboveColor:`Färg för överstiget tröskelvärde`,belowColor:`Färg för understiget tröskelvärde`,optimalColor:`Färg för optimalt värde`,colors:{red:`Röd`,orange:`Orange`,yellow:`Gul`,green:`Grön`,blue:`Blå`,purple:`Lila`,pink:`Rosa`},saved:`Alternativ sparade`,saveFailed:`Kunde inte spara alternativ`,reset:`Återställ`,resetConfirm:{title:`Återställ alla befintliga platssensorer?`,message:`Detta skriver över larmtröskelvärden, notiser och kortsynlighet för alla befintliga lagringsplats-temperatur-, luftfuktighets- och batterisensorer med de värden som konfigurerats ovan, och återställer varje sensors namn till dess Home Assistant-vänliga namn — skrivarsensorer påverkas inte. Detta kan inte ångras. Beroende på hur många sensorer du har, kan detta ta en stund.`},resetDone:`Tillämpat på {{count}} plats-sensorer`,resetFailed:`Kunde inte återställa plats-sensorer`},deleteAllConfirm:{title:`Ta bort alla sensorer?`,message:`Detta tar bort alla {{count}} sensorer bundna till "{{location}}". Detta kan inte ångras.`},currentlyBound:`För närvarande kopplad: {{entity}}`,error:{locationRequired:`Välj en lagringsplats`},toast:{created:`Sensor tillagd`,updated:`Sensor sparad`,deleted:`Sensor borttagen`}},smartPlugs:{offline:`Offline`,admin:`Admin`,openPlugAdminPage:`Öppna kontakt-adminsida`,deleteSmartPlug:`Ta bort kontakt`,turnOnSmartPlug:`Sätt på kontakt`,turnOffSmartPlug:`Stäng av kontakt`,turnOn:`Sätt på`,turnOff:`Stäng av`,addSmartPlug:{scanningNetwork:`Söker i subnät...`,chooseEntity:`Välj en entitet...`,connectionFailed:`Kunde inte ansluta`,searchEntities:`Sök entiteter...`,searchPowerSensors:`Sök effektsensorer...`,searchEnergySensors:`Sök energisensorer...`,placeholders:{plugName:`Kontakt i vardagsrummet`,mqttStateOnValue:`PÅ, true, 1`,mqttSameAsPower:`Samma som effekttopik, eller annan`}},linkedTo:`Länkad till:`,monitorOnly:`Endast övervakning`,alerts:`Larm`,scheduleOn:`På {{time}}`,scheduleOff:`Av {{time}}`,on:`På`,off:`Av`,power:`Effekt`,kwhToday:`kWh idag`,settings:`Inställningar`,automationSettings:`Automatiseringsinställningar`,showInSwitchbar:`Visa i kontaktpanel`,quickAccessSidebar:`Snabbåtkomst från sidofält`,enabled:`Aktiverad`,enableAutomation:`Aktivera automatisering för denna kontakt`,autoOn:`Auto på`,autoOnDescription:`Sätt på när utskrift startar`,autoOff:`Auto av`,autoOffDescription:`Stäng av när utskrift slutförs (engångs)`,autoOffPersistent:`Håll aktiverad`,autoOffPersistentDescription:`Förblir aktiverad mellan utskrifter istället för engångs`,controlsPrinterPower:`Kontrollerar skrivarens ström`,controlsPrinterPowerDescription:`Stäng av om denna kontakt endast förser en tillbehörsenhet (filterfläkt, belysning). Annars markeras skrivaren som offline när den stängs av.`,autoOffAfterDrying:`Auto av efter torkning`,autoOffAfterDryingDescription:`Stäng av när AMS-torkning slutförs`,delayAfterDryingMinutes:`Torkningsfördröjning (minuter)`,turnOffDelayMode:`Avstängningsfördröjningsläge`,time:`Tid`,temp:`Temp`,delayMinutes:`Fördröjning (minuter)`,tempThreshold:`Temperaturtröskelvärde (°C)`,tempThresholdDescription:`Stäng av när munstycket svalnar under detta tröskelvärde`,edit:`Redigera`,deleteConfirm:`Är du säker på att du vill ta bort "{{name}}"? Detta kan inte ångras.`,turnOnConfirm:`Är du säker på att du vill sätta på "{{name}}"?`,turnOffConfirm:`Är du säker på att du vill stänga av "{{name}}"? Detta kommer att bryta strömmen till den anslutna enheten.`,failedToTurn:`Kunde inte {{action}} "{{name}}"`,unknown:`Okänd`,addTitle:`Lägg till kontakt`,editTitle:`Redigera kontakt`,stopScanning:`Stoppa sökning`,discoverTasmota:`Upptäck Tasmota-enheter`,foundDevices:`Hittade {{count}} enhet(er) — klicka för att välja:`,noDevicesFound:`Inga Tasmota-enheter hittade i ditt subnät`,haNotConfigured:`Home Assistant är inte konfigurerad. Ställ in det i`,haSettingsPath:`Inställningar → Nätverk → Home Assistant`,selectEntity:`Välj entitet *`,ipAddress:`IP-adress *`,nameLabel:`Namn *`,username:`Användarnamn`,password:`Lösenord`,authHint:`Lämna tomt om din Tasmota-enhet inte kräver autentisering`,linkToPrinter:`Länka till skrivare`,noPrinter:`Ingen skrivare (endast manuell kontroll)`,linkingDescription:`Länkning aktiverar automatisk på/av när utskrifter startar/slutförs`,powerAlerts:`Effektlarm`,alertAbove:`Larma om över (W)`,alertBelow:`Larma om under (W)`,alertDescription:`Få en notis när effektförbrukningen överskrider dessa tröskelvärden. Lämna tomt för att inaktivera det villkoret.`,dailySchedule:`Dagligt schema`,turnOnAt:`Sätt på klockan`,turnOffAt:`Stäng av klockan`,scheduleDescription:`Sätt automatiskt på/av kontakten vid dessa tider dagligen. Lämna tomt för att hoppa över den åtgärden.`,showOnPrinterCard:`Visa på skrivarkort`,displayOnPrinterCard:`Visa knapp på skrivarkort`,connectedResult:`Ansluten!`,deviceLabel:`Enhet: {{name}} - `,stateLabel:`Status: {{state}}`,test:`Test`,delete:`Ta bort`,save:`Spara`,add:`Lägg till`,cancel:`Avbryt`,failedToStartScan:`Kunde inte starta sökning`,nameRequired:`Namn krävs`,entityRequired:`Entitet krävs för Home Assistant-kontakter`,mqttTopicRequired:`Minst ett MQTT-ämne måste konfigureras för effekt, energi eller statusövervakning`,loadingEntities:`Laddar entiteter...`,loading:`Laddar...`,failedToLoadEntities:`Kunde inte ladda entiteter: {{error}}`,noEntitiesMatching:`Inga entiteter hittade som matchar "{{search}}"`,noEntitiesAvailable:`Inga entiteter tillgängliga`,searchingEntities:`Söker i alla entiteter ({{count}} hittade)`,showingEntities:`Visar switch, light, input_boolean ({{count}} tillgängliga)`,energyMonitoringOptional:`Energiövervakning (valfritt)`,energyMonitoringHint:`Sök och välj sensorer som tillhandahåller effekt-/energidata.`,powerSensorW:`Effektsensor (W)`,energyTodayKwh:`Energi idag (kWh)`,totalEnergyKwh:`Total energi (kWh)`,noMatchingSensors:`Inga matchande sensorer`,none:`Ingen`,mqttNotConfigured:`MQTT-mäklare inte konfigurerad. Ställ in mäklaradress i`,mqttSettingsPath:`Inställningar → Nätverk → MQTT-publicering`,mqttNotConfiguredSuffix:`(du behöver inte aktivera publicering, fyll bara i mäklaruppgifterna).`,mqttMonitorOnlyDescription:`MQTT-kontakter tar emot effekt-/energidata via MQTT-prenumeration. På/av-kontroll är inte tillgänglig — använd din MQTT-mäklare eller hemautomatiseringssystem.`,powerMonitoring:`Effektövervakning`,energyMonitoring:`Energiövervakning`,stateMonitoring:`Statusövervakning`,optional:`valfritt`,topic:`Topik`,jsonPath:`JSON-sökväg`,multiplier:`Multiplikator`,onValue:`PÅ-värde`,mqttPowerHint:`JSON-sökväg extraherar värde från JSON-nyttolast (t.ex. "power_l1"). Lämna tomt om ämnet publicerar råa numeriska värden.
 Använd multiplikator 0,001 för mW→W, 1000 för kW→W.`,mqttEnergyHint:`JSON-sökväg extraherar värde från JSON-nyttolast. Lämna tomt för råa värden.
 Använd multiplikator 0,001 för Wh→kWh, 1000 för MWh→kWh.`,mqttStateHint:`JSON-sökväg extraherar värde från JSON-nyttolast. Lämna tomt för råa värden.
-PÅ-värde: den exakta strängen som betyder "PÅ". Lämna tomt för auto-upptäckt (PÅ, true, 1).`,restControl:`Kontroll`,restOnUrl:`Sätt PÅ-URL`,restOffUrl:`Sätt AV-URL`,restOnBody:`PÅ-förfrågningsinnehåll`,restOffBody:`AV-förfrågningsinnehåll`,restMethod:`HTTP-metod`,restHeaders:`Anpassade huvuden (JSON)`,restStatusUrl:`Status-URL`,restStatusPath:`Status JSON-sökväg`,restStatusOnValue:`PÅ-värde`,restPowerUrl:`Effekt-URL`,restPowerPath:`Effekt JSON-sökväg`,restPowerMultiplier:`Effektmultiplikator`,restEnergyUrl:`Energi-URL`,restEnergyPath:`Energi JSON-sökväg (idag)`,restEnergyTotalPath:`Energi JSON-sökväg (livstid)`,restEnergyTotalMultiplier:`Livstidsmultiplikator`,restEnergyTotalPathHint:`t.ex. aenergy.total`,restEnergyTotalHint:`Många kontakter — varje Shelly bland dem — rapporterar endast en livstidsräknare som aldrig nollställs. Den hör hit, inte i fältet ovan: läs som dagens användning skulle den aldrig nollställas vid midnatt, och Igår och Totalt skulle förbli tomma. Bambuddy beräknar Idag och Igår utifrån den, vilket tar en eller två dagars avläsningar att fylla i. En Shelly rapporterar wattimmar, så använd en multiplikator på 0,001.`,restEnergyMultiplier:`Energimultiplikator`,restUrlRequired:`Minst en URL (PÅ eller AV) krävs för REST-kontakter`,restHeadersHint:`t.ex. {"Authorization": "Bearer din-token"}`,restBodyHint:`t.ex. PÅ, {"state": "on"}`,restStatusHint:`URL för att hämta aktuell status`,restPathHint:`t.ex. state eller data.power.status`,restPowerUrlHint:`Separat URL för effektdata (använder Status-URL om tom)`,restEnergyUrlHint:`Separat URL för energidata (använder Status-URL om tom)`,restEnergyHint:`Varje värde kan använda sin egen URL eller falla tillbaka till Status-URL. Använd multiplikatorer för enhetsomvandling (t.ex. 0,001 för att konvertera Wh till kWh).`,testConnection:`Testa anslutning`,connectionSuccess:`Anslutning lyckades`,noSwitchesInSwitchbar:`Inga växlar i kontaktpanelen`,enableSwitchbarHint:`Aktivera "Visa i kontaktpanel" i Inställningar > Kontakter`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`E-post`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`SMTP e-postnotiser`,telegram:`Notiser via Telegram-bot`,discord:`Skicka till Discord-kanal via webhook`,ntfy:`Gratis, självhostade pushnotiser`,pushover:`Enkla, pålitliga pushnotiser`,callmebot:`Gratis WhatsApp-notiser via CallMeBot`,webhook:`Generisk HTTP POST till valfri URL`,homeassistant:`Permanenta notiser i Home Assistant-instrumentpanel`,bark:`iOS push-notiser via Bark (självhostbar)`},lastSuccess:`Senast: {{date}}`,error:`Fel`,printer:`Skrivare:`,allPrinters:`Alla skrivare`,sendTestNotification:`Skicka testnotis`,eventSettings:`Händelseinställningar`,enabled:`Aktiverad`,sendFromProvider:`Skicka notiser från denna leverantör`,printEvents:`Utskriftshändelser`,printerStatus:`Skrivarstatus`,amsAlarms:`AMS-larm`,amsHtAlarms:`AMS-HT-larm`,printQueue:`Utskriftskö`,start:`Start`,plateCheck:`Plattkontroll`,complete:`Slutförd`,failed:`Misslyckad`,stopped:`Stoppad`,progress:`Förlopp`,offline:`Offline`,lowFilament:`Lågt filament`,maintenance:`Underhåll`,amsHumidity:`AMS-luftfuktighet`,amsTemp:`AMS-temperatur`,amsDryingSuspended:`Torkning pausad`,amsHtHumidity:`AMS-HT-luftfuktighet`,amsHtTemp:`AMS-HT-temperatur`,bedCooled:`Byggplatta kyld`,firstLayer:`Första skikt`,quiet:`Tyst`,digest:`Sammanfattning {{time}}`,printStarted:`Utskrift startad`,plateNotEmpty:`Platta inte tom`,plateNotEmptyDescription:`Objekt upptäckta före utskrift`,plateClearRequired:`Platt-rensning krävs`,plateClearRequiredDescription:`Utskrift slutförd, kön väntar på plattbekräftelse`,plateClear:`Platta rensad`,printCompleted:`Utskrift slutförd`,bedCooledLabel:`Byggplatta kyld`,bedCooledDescription:`Byggplattan kyld under tröskelvärdet efter utskrift`,firstLayerCompleteLabel:`Första skikt klart`,firstLayerCompleteDescription:`Notis med ögonblicksbild när första skiktet är klart`,missingSpoolAssignmentLabel:`Rulltilldelning saknas`,billingChargeFailedLabel:`Faktureringsavgift misslyckades`,billingChargeFailedDescription:`Notis när utskriftskostnader inte kunde registreras`,missingSpoolAssignmentDescription:`Notis när utskrift startar och nödvändiga fack saknar tilldelad rulle`,printFailed:`Utskrift misslyckades`,printStopped:`Utskrift stoppad`,progressMilestones:`Förloppsmilstolpar`,progressMilestonesDescription:`Notis vid 25%, 50%, 75%`,printerOffline:`Skrivare offline`,printerError:`Skrivarfel`,aiFailureDetection:`AI-felsdetektering`,aiFailureDetectionDescription:`Notis när Obico AI upptäcker ett möjligt utskriftsfel`,lowFilamentLabel:`Lågt filament`,maintenanceDue:`Underhåll förfallit`,maintenanceDueDescription:`Notis när underhåll behövs`,amsHumidityHigh:`Hög AMS-luftfuktighet`,amsHumidityHighDescription:`AMS-luftfuktighet överskrider tröskelvärdet`,amsTemperatureHigh:`Hög AMS-temperatur`,amsTemperatureHighDescription:`AMS-temperatur överskrider tröskelvärdet`,amsDryingSuspendedTitle:`Auto-torkning pausad`,amsDryingSuspendedDescription:`Automatisk torkning avbröts för en AMS-enhet eftersom luftfuktigheten aldrig sjönk under tröskelvärdet`,amsHtHumidityHigh:`Hög AMS-HT-luftfuktighet`,amsHtHumidityHighDescription:`AMS-HT-luftfuktighet överskrider tröskelvärdet`,amsHtTemperatureHigh:`Hög AMS-HT-temperatur`,amsHtTemperatureHighDescription:`AMS-HT-temperatur överskrider tröskelvärdet`,inventoryAlerts:`Lagerlarm`,stockReorderAlert:`Påfyllningslarm`,stockReorderAlertDescription:`Artikel har nått sin påfyllningsnivå`,stockBreakAlert:`Lagerslutslarm`,stockBreakAlertDescription:`Lagret kommer att ta slut innan påfyllning ankommer`,jobAdded:`Jobb tillagt`,jobAddedDescription:`Jobb tillagt i kön`,jobAssigned:`Jobb tilldelat`,jobAssignedDescription:`Modellbaserat jobb tilldelat till skrivare`,jobStarted:`Jobb startat`,jobStartedDescription:`Köjobb startade utskrift`,jobWaiting:`Jobb väntar`,jobWaitingDescription:`Jobb väntar på filament eller skrivare`,jobSkipped:`Jobb hoppades över`,jobSkippedDescription:`Jobb hoppades över (föregående misslyckades)`,jobFailed:`Jobb misslyckades`,jobFailedDescription:`Jobb kunde inte starta`,queueComplete:`Kö slutförd`,queueCompleteDescription:`Alla köjobb slutförda`,quietHours:`Tysta timmar`,noNotificationsDuring:`Inga notiser under dessa timmar`,editProviderToChangeQuietHours:`Redigera leverantör för att ändra tysta timmar`,dailyDigest:`Daglig sammanfattning`,batchNotifications:`Samla notiser till en daglig sammanfattning`,sendAt:`Skicka klockan {{time}}`,editProviderToChangeDigestTime:`Redigera leverantör för att ändra sammanfattningstid`,edit:`Redigera`,deleteProvider:`Ta bort notisleverantör`,deleteConfirm:`Är du säker på att du vill ta bort "{{name}}"? Detta kan inte ångras.`,delete:`Ta bort`,addTitle:`Lägg till notisleverantör`,editTitle:`Redigera notisleverantör`,nameLabel:`Namn *`,namePlaceholder:`Mina notiser`,providerTypeLabel:`Leverantörstyp *`,configuration:`Konfiguration`,testConfiguration:`Testa konfiguration`,printerFilter:`Skrivarfilter`,onlyFromPrinter:`Skicka notiser endast för händelser från denna skrivare`,quietHoursDnd:`Tysta timmar (Stör ej)`,quietStart:`Start`,quietEnd:`Slut`,dailyDigestLabel:`Daglig sammanfattning`,sendDigestAt:`Skicka sammanfattning klockan`,digestCollected:`Händelser kommer att samlas och skickas som en sammanfattning vid denna tid`,notificationEvents:`Notishändelser`,progressPercent:`(25%, 50%, 75%)`,bedCooledAfterPrint:`(efter utskrift slutförs)`,haSensorAlert:`Sensorlarm`,haSensorAlertDescription:`(en kopplad Home Assistant-sensor behöver uppmärksamhet)`,locationHaSensorAlert:`Sensorlarm för lagringsplats`,locationHaSensorAlertDescription:`(en Home Assistant-sensor som är kopplad till en lagringsplats behöver uppmärksamhet)`,eventPriority:{sectionTitle:`ntfy-prioritet`,helpNtfy:`Välj en prioritet för varje aktiverad händelse. ntfy använder dessa för att eskalera larm (ljud, synlighet, push-beteende). Nivåer som inte sätts här använder ntfy-serverns standard.`,min:`Min`,low:`Låg`,default:`Standard`,high:`Hög`,urgent:`Brådskande`},cancel:`Avbryt`,save:`Spara`,add:`Lägg till`,nameRequired:`Namn krävs`,fieldRequired:`{{field}} krävs`,haDataInvalid:`Data-fältet måste vara ett giltigt JSON-objekt, t.ex. {"priority": "high", "ttl": 0}`,phoneNumber:`Telefonnummer`,apiKey:`API-nyckel`,serverUrl:`Server-URL`,topic:`Ämne`,authToken:`Autentiseringstoken`,userKey:`Användarnyckel`,appToken:`App-nyckel`,priority:`Prioritet`,pushoverRetry:`Nödåterförsök (s)`,pushoverExpire:`Nödutgång (s)`,botToken:`Bot-token`,chatId:`Chat-ID`,telegramThreadId:`Forumämnes-ID`,telegramThreadIdHelp:`Valfritt. Skickar till ett enda ämne i en forumgrupp — det sista numret i ämneslänken (t.me/c/.../25). Lämna tomt för det allmänna ämnet.`,telegramThreadIdInvalid:`Forumämnes-ID måste vara ett nummer.`,smtpServer:`SMTP-server`,smtpPort:`SMTP-port`,security:`Säkerhet`,authentication:`Autentisering`,username:`Användarnamn`,password:`Lösenord`,fromEmail:`Från e-post`,toEmail:`Till e-post`,webhookUrl:`Webhook-URL`,payloadFormat:`Nyttolastsformat`,authorization:`Autorisation`,titleFieldName:`Titel-fältnamn`,messageFieldName:`Meddelande-fältnamn`,editTemplate:`Redigera mall: {{name}}`,titleLabel:`Titel`,bodyLabel:`Brödtext`,titlePlaceholder:`Notistitel...`,bodyPlaceholder:`Notisbrödtext...`,availableVariables:`Tillgängliga variabler`,clickToInsert:`Klicka för att infoga vid markörpositionen i brödtext`,livePreview:`Live-förhandsvisning`,hide:`Dölj`,show:`Visa`,loadingPreview:`Laddar förhandsvisning...`,enterTemplateContent:`Ange mallinnehåll för att se förhandsvisning`,titlePreview:`Titel:`,bodyPreview:`Brödtext:`,resetToDefault:`Återställ till standard`,titleRequired:`Titel krävs`,bodyRequired:`Brödtext krävs`,notificationLog:`Notislogg`,showFailedOnly:`Visa endast misslyckade`,last24Hours:`Senaste 24 timmarna`,last7Days:`Senaste 7 dagarna`,last30Days:`Senaste 30 dagarna`,last90Days:`Senaste 90 dagarna`,justNow:`Precis nu`,noFailedNotifications:`Inga misslyckade notiser`,noNotificationsLogged:`Inga notiser loggade`,unknownProvider:`Okänd leverantör`,logTitle:`Titel`,logMessage:`Meddelande`,logError:`Fel`,logProvider:`Leverantör: {{type}}`,logTime:`Tid: {{time}}`,refresh:`Uppdatera`,clearOld:`Rensa gamla`,statsSummary:`Senaste {{days}} dagarna:`,statsNotifications:`notiser`,statsSent:`{{count}} skickade`,statsFailed:`{{count}} misslyckade`,eventTypes:{print_start:`Utskrift startad`,print_complete:`Utskrift slutförd`,print_failed:`Utskrift misslyckades`,print_stopped:`Utskrift stoppad`,print_progress:`Förlopp`,printer_offline:`Skrivare offline`,printer_error:`Skrivarfel`,filament_low:`Lågt filament`,maintenance_due:`Underhåll förfallit`,test:`Test`},userEmail:{title:`Notiser`,emailNotifications:`E-postnotiser`,emailNotificationsDesc:`Ta emot e-postnotiser för dina egna utskriftsjobb. E-postmeddelanden skickas med hjälp av systemets SMTP-inställningar som konfigurerats i avancerad autentisering.`,sendingTo:`Notiser kommer att skickas till`,noEmailWarning:`Ditt konto har ingen e-postadress. Kontakta en administratör för att lägga till en.`,printJobNotifications:`Utskriftsjobbnotiser`,printJobNotificationsDesc:`Välj vilka händelser som utlöser e-postnotiser för utskriftsjobb som du skickar in.`,printJobStarts:`Utskriftsjobb startar`,printJobStartsDesc:`Få en notis när ditt utskriftsjobb börjar.`,printJobFinishes:`Utskriftsjobb slutförs`,printJobFinishesDesc:`Få en notis när ditt utskriftsjobb slutförs.`,printErrors:`Utskriftsfel`,printErrorsDesc:`Få en notis när ditt utskriftsjobb misslyckas eller stöter på ett fel.`,printJobStops:`Utskriftsjobb stoppas`,printJobStopsDesc:`Få en notis när ditt utskriftsjobb avbryts eller stoppas.`,saveSuccess:`Notisinställningar sparade.`,saveError:`Kunde inte spara notisinställningar.`}},richTextEditor:{bold:`Fet`,italic:`Kursiv`,underline:`Understruken`,bulletList:`Punktlista`,numberedList:`Numrerad lista`,alignLeft:`Vänsterjustera`,alignCenter:`Centrera`,alignRight:`Högerjustera`,addLink:`Lägg till länk`,removeLink:`Ta bort länk`},externalLinks:{title:`Sidofältslänkar`,sidebarLayout:`Sidofält`,sidebarLayoutDescription:`Visa eller dölj inbyggda sidor, lägg till externa länkar och dra objekt för att omordna sidofältsnavigeringen.`,systemPages:`Bambuddy-sidor`,externalLinks:`Externa länkar`,visibleInSidebar:`Synlig i sidofält`,hiddenFromSidebar:`Dold från sidofält`,requiredInSidebar:`Obligatorisk i sidofält`,hidePage:`Dölj sida`,showPage:`Visa sida`,settingsCannotBeHidden:`Inställningar kan ej döljas`,noLinksConfigured:`Inga externa länkar konfigurerade`,deleteLink:`Ta bort länk`,removeCustomIcon:`Ta bort anpassad ikon`,openInNewTab:`Öppna i ny flik`,placeholders:{linkName:`Min länk`}},keyboardShortcuts:{title:`Tangentbordsgenvägar`,navigation:`Navigering`,archivesSection:`Arkiv`,kProfilesSection:`K-profiler`,generalSection:`Allmänt`,shortcuts:{goToPrinters:`Gå till Skrivare`,goToArchives:`Gå till Arkiv`,goToQueue:`Gå till Kö`,goToStats:`Gå till Statistik`,goToProfiles:`Gå till Molnprofiler`,goToSettings:`Gå till Inställningar`,focusSearch:`Fokusera sökning`,openUploadModal:`Öppna uppladdningsmodal`,clearSelection:`Rensa val / ta bort fokus från inmatning`,contextMenu:`Kontextmeny på kort`,refreshProfiles:`Uppdatera profiler`,newProfile:`Ny profil`,exitSelectionMode:`Avsluta urvalsläge`,showHelp:`Visa denna hjälp`},footer:`Tryck på Esc eller klicka utanför för att stänga`},notificationLog:{title:`Notislogg`,events:{printStarted:`Utskrift startad`,printComplete:`Utskrift slutförd`,printFailed:`Utskrift misslyckades`,printStopped:`Utskrift stoppad`,progress:`Förlopp`,printerOffline:`Skrivare offline`,printerError:`Skrivarfel`,lowFilament:`Lågt filament`,maintenanceDue:`Underhåll utebliven`,test:`Test`},timeAgo:{justNow:`Precis nu`,minutesAgo:`{{minutes}}m sedan`,hoursAgo:`{{hours}}t sedan`}},restoreBackup:{title:`Återställ säkerhetskopia`,restoring:`Återställer...`,restoreComplete:`Återställning slutförd`,restoreFailed:`Kunde inte återställa`,importSettings:`Importera inställningar från en säkerhetskopia`,pleaseWait:`Vänligen vänta medan din data återställs`,clickToSelect:`Klicka för att välja säkerhetskopia (.json eller .zip)`,howDuplicateHandling:`Hur dubbletter hanteras:`,categories:{printers:`Skrivare`,smartPlugs:`Kontakter`,notificationProviders:`Notisleverantörer`,filaments:`Filament`,archives:`Arkiv`,pendingUploads:`Väntande uppladdningar`,settingsTemplates:`Inställningar & mallar`},matchingInfo:{printers:`matchade efter serienummer`,smartPlugs:`matchade efter IP-adress`,notificationProviders:`matchade efter namn`,filaments:`matchade efter namn + typ + märke`,archives:`matchade efter innehållshash`,pendingUploads:`matchade efter filnamn`,settingsTemplates:`skrivs alltid över`},replaceExisting:`Ersätt befintlig data`,keepExisting:`Behåll befintlig data`,replaceDescription:`Skriv över objekt som redan finns med säkerhetskopia`,keepDescription:`Återställ endast objekt som inte redan finns`,caution:`Varning:`,cautionText:`Att skriva över kommer att ersätta dina nuvarande konfigurationer med data från säkerhetskopian. Skrivaråtkomstkoder skrivs aldrig över av säkerhetsskäl.`,itemsRestored:`Objekt återställda`,itemsSkipped:`Objekt hoppade över`,restored:`Återställd`,skipped:`Hoppades över (finns redan)`,filesLabel:`Filer (3MF, minibilder, etc.)`,newApiKeysGenerated:`Nya API-nycklar genererade`,newApiKeysWarning:`Dessa nycklar visas endast en gång. Kopiera dem nu!`,processingBackup:`Bearbetar säkerhetskopia...`,noDataFound:`Ingen data hittades att återställa i säkerhetskopian.`,failedToRestore:`Kunde inte återställa säkerhetskopia. Kontrollera filformatet.`},backupExport:{title:`Exportera säkerhetskopia`,selectData:`Välj data att inkludera`,selectAll:`Markera alla`,selectNone:`Avmarkera alla`,categoryDescriptions:{settings:`Språk, tema, uppdateringsinställningar`,notifications:`ntfy, Pushover, Discord, etc.`,templates:`Anpassade meddelandemallar`,smartPlugs:`Tasmota-kontaktkonfigurationer`,externalLinks:`Sidofältslänkar till externa tjänster`,printers:`Skrivarinformation (åtkomstkoder exkluderade)`,plateDetection:`Referensbilder för tomma plattor`,filaments:`Filamenttyper och kostnader`,maintenance:`Anpassade underhållsscheman`,archives:`All utskriftsdata + filer (3MF, minibilder, foton)`,projects:`Projekt, BOM-objekt och bilagor`,pendingUploads:`Uppladdningar från virtuell skrivare som väntar på granskning`,apiKeys:`Webhook API-nycklar (nya nycklar genereras vid import)`},requiresPrinters:`Kräver att Skrivare är valda`,zipFileWarning:`En ZIP-fil kommer att skapas.`,zipFileDescription:`Inkluderar alla 3MF-filer, minibilder, timelapse och foton. Detta kan ta en stund och resultera i en stor fil.`,includeAccessCodes:`Inkludera åtkomstkoder`,includeAccessCodesDescription:`För överföring till en annan maskin`,includeAccessCodesWarning:`Åtkomstkoder kommer att inkluderas i klartext. Håll denna säkerhetskopia säker!`,categoriesSelected:`{{selectedCount}} kategorier valda`},pendingUploads:{placeholders:{notes:`Lägg till anteckningar om denna utskrift...`},discardUpload:`Kassera uppladdning`,archiveAllUploads:`Arkivera alla uppladdningar`,discardAllUploads:`Kassera alla uppladdningar`,archive:`Arkivera`,timeAgo:{justNow:`Precis nu`,minutesAgo:`{{minutes}}m sedan`,hoursAgo:`{{hours}}t sedan`,daysAgo:`{{days}}d sedan`}},apiBrowser:{placeholders:{requestBody:`JSON-förfrågningsinnehåll...`,searchEndpoints:`Sök ändpunkter...`}},configureAmsSlot:{title:`Konfigurera AMS-fack`,slotConfigured:`Fack konfigurerat!`,configuringSlot:`Konfigurerar fack:`,slotLabel:`{{ams}} fack {{slot}}`,searchPresets:`Sök förinställningar...`,colorPlaceholder:`Färgnamn eller hex (t.ex. brun, FF8800)`,clearCustomColor:`Rensa anpassad färg`,noCloudPresets:`Inga molnförinställningar. Logga in på Bambu Cloud för att synkronisera.`,noPresetsAvailable:`Inga förinställningar tillgängliga. Logga in på Bambu Cloud eller importera lokala profiler.`,noMatchingPresets:`Inga matchande förinställningar hittade.`,custom:`Anpassad`,builtin:`Inbyggd`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Inställningar skickade till skrivare`,filamentProfile:`Filamentprofil`,kProfileLabel:`K-profil (Tryckförskott)`,filteringFor:`Filtrerar för: {{material}}`,noKProfile:`Ingen K-profil (använd standard 0,020)`,noMatchingKProfiles:`Inga matchande K-profiler hittade. Standard K=0,020 kommer att användas.`,otherKProfiles:`Andra K-profiler på denna skrivare`,selectFilamentFirst:`Välj en filamentprofil först`,kFromCalibration:`K={{value}} från skrivarkalibrering`,customColorLabel:`Anpassad färg (valfritt)`,presetColors:`{{name}}-färger:`,showLessColors:`Visa färre färger`,showMoreColors:`Visa fler färger`,clear:`Rensa`,hexLabel:`Hex: #{{hex}}`,resetting:`Återställer...`,resetSlot:`Återställ fack`,cancel:`Avbryt`,configuring:`Konfigurerar...`,configureSlot:`Konfigurera fack`},githubBackup:{title:`Git-säkerhetskopia`,history:`Historik`,downloadBackup:`Ladda ner säkerhetskopia`,restoreBackup:`Återställ säkerhetskopia`,noBackupsYet:`Inga säkerhetskopior än`},emailSettings:{placeholders:{fromName:`Bambuddy`}},tagManagement:{searchTags:`Sök taggar...`,renameTag:`Döp om tagg`,deleteTag:`Ta bort tagg`},notificationTemplates:{placeholders:{title:`Notistitel...`,body:`Notisbrödtext...`}},batchTag:{placeholders:{newTag:`Ange ny tagg...`}},photoGallery:{deletePhoto:`Ta bort foto`},filamentHoverCard:{copySpoolUuid:`Kopiera rullens UUID`},kProfilesView:{hasNote:`Har anteckning`,copyProfile:`Kopiera profil`},layout:{openMenu:`Öppna meny`,noPermissionSystemInfo:`Du har inte behörighet att visa systeminformation`},dashboard:{dragToReorder:`Dra för att omordna`,hideWidget:`Dölj widget`},notificationProviderCard:{deleteNotificationProvider:`Ta bort notisleverantör`},fileManagerModal:{closeFileManager:`Stäng filhanterare`,sortFiles:`Sortera filer`,goToParentFolder:`Gå till överordnad mapp`,threeView:`3D-vy`},embeddedCameraViewer:{refreshStream:`Uppdatera ström`,close:`Stäng`,zoomOut:`Zooma ut`,resetZoom:`Återställ zoom`,zoomIn:`Zooma in`,dragToResize:`Dra för att ändra storlek`},timelapseViewer:{skipBack5s:`Hoppa bakåt 5s`,skipForward5s:`Hoppa framåt 5s`},notificationProviders:{descriptions:{email:`SMTP e-postnotiser`,telegram:`Notiser via Telegram-bot`,discord:`Skicka till Discord-kanal via webhook`,ntfy:`Gratis, självhostade push-notiser`,pushover:`Enkla, pålitliga push-notiser`,callmebot:`Gratis WhatsApp-notiser via CallMeBot`,webhook:`Generisk HTTP POST till valfri URL`}},logViewer:{searchPlaceholder:`Sök meddelande eller loggnamn...`,noLogEntries:`Inga loggposter hittade`},switchbarPopover:{noSwitchesInSwitchbar:`Inga växlar i kontaktpanelen`},projectPageModal:{placeholders:{title:`Titel`,designer:`Designer`,license:`Licens`,description:`Ange beskrivning...`,profileTitle:`Profilnamn`,profileDescription:`Profilbeskrivning...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`Väntar`,justNow:`Precis nu`,now:`Nu`,minsAgo:`{{count}}m sedan`,inMins:`om {{count}}m`,hoursAgo:`{{count}}t sedan`,inHours:`om {{count}}t`,daysAgo:`{{count}}d sedan`,inDays:`om {{count}}d`},spoolbuddy:{nav:{dashboard:`Instrumentpanel`,ams:`AMS`,inventory:`Inventarium`,writeTag:`Skriv tagg`,settings:`Inställningar`},status:{nfcReady:`NFC redo`,nfcOff:`NFC av`,offline:`Offline`,online:`Online`,noPrinters:`Inga skrivare`,deviceOffline:`Enhet offline`,waitingConnection:`Väntar på enhetsanslutning...`,systemReady:`System redo`,status:`Status`},dashboard:{readyToScan:`Redo att skanna`,idleMessage:`Placera en rulle på vågen för att identifiera den`,nfcHint:`NFC-tagg kommer att läsas automatiskt`,device:`Enhet`,syncWeight:`Synkronisera vikt`,weightSynced:`Synkroniserad!`,unknownTag:`Okänd tagg`,newTag:`Ny tagg upptäckt`,onScale:`på våg`,linkSpool:`Länka till rulle`,linkTagTitle:`Länka tagg till rulle`,linkTag:`Länka tagg`,selectSpool:`Välj en rulle att länka denna tagg till:`,noUntagged:`Inga rullar utan taggar hittade`,tagDetected:`Tagg upptäckt`,noTag:`Ingen tagg`,tagId:`Tagg`,grossWeight:`Bruttovikt`,spoolSize:`Rullstorlek`,close:`Stäng`,currentSpool:`Aktuell rulle`,plateReady:`Platta redo: {{name}}`,plateReadyLabel:`Plattor redo att rensa`,plateClearAction:`Rensa`,plateClearedToast:`Platta markerad som rensad`,plateClearFailed:`Kunde inte markera platta som rensad`},modal:{spoolDetected:`Rulle upptäckt`,assignToAms:`Tilldela till AMS`,syncWeight:`Synkronisera vikt`,weightSynced:`Synkroniserad!`,syncing:`Synkroniserar...`,newTagDetected:`Ny tagg upptäckt`,addToInventory:`Lägg till i inventarium`,assignToAmsTitle:`Tilldela till AMS`,selectSlot:`Välj ett fack`,assign:`Tilldela`,assigning:`Tilldelar...`,assignSuccess:`Tilldelad!`,assignPendingInsert:`Tilldelad. Facket kommer att konfigureras när du sätter in rullen.`,assignError:`Kunde inte tilldela rulle. Försök igen.`,noPrinterSelected:`Välj en skrivare...`,noAmsDetected:`Ingen AMS upptäckt på denna skrivare`,slot:`Fack`},weight:{noReading:`Ingen avläsning`,stable:`Stabil`,measuring:`Mäter...`,tare:`Tara`,calibrate:`Kalibrera`},spool:{remaining:`Återstående`,material:`Material`,brand:`Märke`,color:`Färg`,coreWeight:`Kärna`,labelWeight:`Etikett`,scaleWeight:`Våg`,netWeight:`Nettovikt`,lastUsed:`Senast använd`,unknownColor:`Okänd färg`},ams:{noData:`Ingen AMS upptäckt`,connectAms:`Anslut en AMS för att se filamentfack`,noPrinter:`Ingen skrivare vald`,selectPrinter:`Välj en skrivare från den övre menyn`,printerDisconnected:`Skrivare frånkopplad`,humidity:`Luftfuktighet`,level:`Nivå`,active:`Aktiv`,slot:`Fack`,empty:`Tomt`},inventory:{search:`Sök rullar...`,empty:`Inga rullar i inventariet`,noResults:`Inga matchande rullar`,spools:`rullar`,addSpool:`Lägg till rulle`},settings:{tabDevice:`Enhet`,tabDisplay:`Skärm`,tabScale:`Våg`,tabUpdates:`Uppdateringar`,nfcReader:`NFC-läsare`,type:`Typ`,connection:`Anslutning`,notConnected:`Ej ansluten`,deviceInfo:`Enhetsinformation`,hostname:`Värdnamn`,uptime:`Driftstid`,systemConfig:`Backend & Autentisering`,backendUrl:`Bambuddy Backend-URL`,apiToken:`API-token`,apiTokenPlaceholder:`Ange API-token`,saveConfig:`Spara konfiguration`,systemQueued:`Konfiguration köad.`,nfcDiagnostic:`NFC-diagnostik`,scaleDiagnostic:`Vågdiagnostik`,readTagDiagnostic:`Läs tagg-diagnostik`,testNfc:`Testa läsare`,testScale:`Testa noggrannhet`,testReadTag:`Läs tagg`,systemFieldsRequired:`Backend-URL krävs.`,brightness:`Ljusstyrka`,saved:`Sparad`,noBacklight:`Ingen DSI-bakgrundsbelysning upptäckt. Ljusstyrkekontroll kräver en DSI-display.`,screenBlank:`Skärm avstängningstimeout`,screenBlankDesc:`Skärmen stängs av efter inaktivitet. Tryck för att väcka.`,displayNote:`Ljusstyrka tillämpas som ett mjukvarufilter.`,scaleCalibration:`Vågkalibrering`,currentWeight:`Aktuell vikt`,tareOffset:`Tara`,calFactor:`Faktor`,knownWeight:`Känd vikt`,calStep1:`Ta bort alla föremål från vågen och tryck på Sätt noll.`,calStep2:`Placera känd vikt på vågen.`,setZero:`Sätt noll`,calibrateNow:`Kalibrera`,calibrated:`Kalibrerad`,tareSet:`Tara-kommando skickad. Väntar på enhet...`,tareComplete:`Tara slutförd!`,tareTimedOut:`Tara timeout — körs SpoolBuddy-demon?`,tareFailed:`Kunde inte skicka tarakommando`,zeroSet:`Nollpunkt inställd. Placera känd vikt på vågen.`,calibrationDone:`Kalibrering slutförd!`,calibrationFailed:`Kalibrering misslyckades`,lastCalibrated:`Senast kalibrerad`,stable:`Stabil`,settling:`Stabiliserar...`,firmware:`Firmware`,scale:`Våg`,noDevice:`Ingen SpoolBuddy-enhet hittad`,daemonVersion:`Demonversion`,currentVersion:`Aktuell`,versionPending:`Väntar på demon...`,checking:`Kontrollerar...`,checkUpdates:`Sök efter uppdateringar`,updateAvailable:`Uppdatering tillgänglig`,updateInstructions:`Uppdatera via SSH: kör SpoolBuddy-installationsskriptet för att uppgradera.`,upToDate:`Uppdaterad`,includeBeta:`Inkludera betaversioner`},writeTag:{tabExisting:`Befintlig rulle`,tabNew:`Ny rulle`,tabReplace:`Ersätt tagg`,searchPlaceholder:`Sök efter material, färg, märke...`,noUntaggedSpools:`Inga rullar utan taggar`,noTaggedSpools:`Inga rullar med taggar`,selectSpool:`Välj en rulle, placera sedan en tom NTAG på läsaren`,placeTag:`Placera en NTAG på läsaren`,tagReady:`Tagg upptäckt — redo att skriva`,writeTag:`Skriv tagg`,replaceTag:`Ersätt tagg`,writing:`Skriver tagg...`,waiting:`Väntar på SpoolBuddy...`,writeSuccess:`Tagg skriven!`,writeFailed:`Kunde inte skriva tagg`,queueFailed:`Kunde inte köa skrivkommando`,tryAgain:`Försök igen`,cancel:`Avbryt`,replaceWarning:`Gamla taggen kommer att avlänkas. Ny tagg kommer att ersätta den.`,deviceOffline:`SpoolBuddy är offline`,material:`Material`,colorName:`Färgnamn`,color:`Färg`,brand:`Märke`,weight:`Vikt (g)`,createSpool:`Skapa rulle`,creating:`Skapar...`,spoolCreated:`Rulle skapad! Redo att skriva.`,createFailed:`Kunde inte skapa rulle`,incompleteDataWarning:`Tagg skriven med ofullständig Spoolman-data`},quickMenu:{printerPower:`Skrivarström`,systemControls:`System`,restartDaemon:`Starta om demon`,restartBrowser:`Starta om webbläsare`,reboot:`Starta om`,shutdown:`Stäng av`,swipeToClose:`Svep ner för att stänga`,confirmTitle:`Bekräfta`,confirmShutdown:`Är du säker på att du vill stänga av SpoolBuddy? Du kommer att behöva fysisk åtkomst för att sätta på den igen.`,confirmReboot:`Är du säker på att du vill starta om SpoolBuddy?`,confirmRestartDaemon:`Starta om SpoolBuddy-demon? NFC och våg kommer att vara tillfälligt otillgängliga.`,confirmRestartBrowser:`Starta om kiosk-webbläsaren? Skärmen kommer kort att bli tom.`,confirm:`Bekräfta`,confirmPlugOn:`Sätt på {{name}}?`,confirmPlugOff:`Stäng av {{name}}?`,turnOn:`Sätt på`,turnOff:`Stäng av`}},diagnostic:{modalTitle:`Anslutningsdiagnostik — {{name}}`,running:`Kör diagnostik...`,runningElapsed:`Kör diagnostik... ({{elapsed}}s)`,waitingForReportHint:`Lyssnar efter att skrivaren ska publicera en statusrapport — detta kan ta upp till {{max}} sekunder.`,runFailed:`Kunde inte köra diagnostik: {{error}}`,retry:`Kör igen`,runButton:`Kör diagnostik`,sectionTitle:`Anslutningsdiagnostik`,sectionDescription:`Kontrollera varför en skrivare inte ansluter eller inte skriver ut — portåtkomlighet, LAN-utvecklarläge, Docker-nätverksläge och inloggningsuppgifter.`,noPrinters:`Inga skrivare konfigurerade.`,overall:{ok:`Inga problem hittade — skrivaranslutningen ser frisk ut.`,warnings:`Skrivaren bör fungera, men vissa saker behöver uppmärksamhet.`,problems:`Hittade problem som förklarar varför skrivaren inte ansluter eller skriver ut.`},check:{port_mqtt:{title:`Kontrollport (MQTT 8883)`,pass:`Åtkomlig — skrivaren accepterar kontrollanslutningar.`,fail:`Port 8883 är otillgänglig. Skrivaren är avstängd, har en annan IP-adress, eller en brandvägg blockerar den. Verifiera skrivarens IP och att inget blockerar port 8883.`},port_ftps:{title:`Filöverföringsport (FTPS 990)`,pass:`Åtkomlig — skickande av utskriftsfiler kommer att fungera.`,warn:`Port 990 är otillgänglig. Övervakning kan fortfarande fungera, men skickande av utskrifter till skrivaren kommer att misslyckas. Se till att port 990 inte blockeras.`,warn_no_tls:`Port 990 är öppen men skrivarens filservice slutför inte ett TLS-handskak. Utskriftsfiler, omslag och timelapse kan inte hämtas, så arkiv förblir tomma. Starta om skrivaren — att låsa upp porten kommer inte att hjälpa.`},external_storage:{title:`Lagra skickade filer på extern lagring (installationssteg 4)`,pass:`Skrivaren rapporterar att detta alternativ är på — skickade filer kommer att lagras på SD-kortet och arkiv kommer att ha minibilder och slicer-inställningar.`,fail:`Skrivaren rapporterar att detta alternativ är av. Aktivera "Lagra skickade filer på extern lagring" — på nyare firmware (P2S 01.02 / Bambu Studio 2.6+) finns växeln på skrivarens Utskriftsinställningar; på äldre versioner finns den i Bambu Studio / OrcaSlicers Enhetsflik. Utan det saknar varje arkiverad utskrift sin minibild och slicer-inställningar.`,skip:`Kontrollerades inte — kräver en aktiv MQTT-anslutning. På äldre slicers där denna inställning endast finns i slicern rapporterar skrivaren aldrig det, så denna kontroll kommer att passera även när alternativet är av — verifiera installationssteg 4 manuellt.`,skip_unsupported_model:`Denna modell har ett SD-kortfack men inget sätt att slå på alternativet — aktuell P1-serie-firmware exponerar inte växeln i Bambu Studio och skrivaren har ingen skärm. Inget att åtgärda här; arkiverade utskrifter kan sakna minibilder och slicer-inställningar tills Bambu Lab lägger till firmware-stöd.`,fail_no_media:`Alternativet är aktiverat, men skrivaren rapporterar att det inte finns något kort eller sticka i sin kortplats, så det finns ingenstans för skickade filer att ta vägen. Sätt i ett och skriv ut igen – fram till dess kommer alla arkiverade utskrifter att sakna sina minibilder och slicing-metadata.`,warn_internal_storage:`Alternativet är aktiverat och lagring finns, men den sista utskriften gick ändå till skrivarens interna lagring, som Bambuddy inte kan läsa. På H2-serien och P2S skickar Bambu Studios Skriv ut-knapp alltid dit det alternativ det är inställt på. Arkivet skrivs ut med namn och tidpunkt, men utan minibild eller metadata för slicern. För kompletta arkiv, starta utskrifter från Bambuddy eller slica i OrcaSlicer — eller i Bambu Studio, använd Skicka med Externt vald, och starta sedan utskriften.`,warn_internal_history:`Alternativet är aktiverat och lagring finns, men den senaste utskriften kördes från en fil som redan fanns på skrivaren – en ny utskrift från dess skärm, en start från Handy eller en fil som skickades tidigare. Det biblioteket finns på den interna lagringen som Bambuddy inte kan läsa, och ingen inställning ändrar det, eftersom ingenting skickades för den utskriften. Den arkiverar fortfarande med sitt namn och tidpunkt, men utan en minibild eller slicer-metadata. För fullständiga arkiv, starta utskrifter från Bambuddy eller skicka dem från slicern.`},port_rtsps:{title:`Kameraport ({{protocol}} {{port}})`,pass:`Åtkomlig — kameraströmmen kommer att fungera.`,warn:`Port {{port}} är otillgänglig. Live-kameravyn kommer inte att fungera. Detta påverkar inte utskriften.`},macos_local_network:{title:`macOS lokala nätverksbehörighet`,pass:`macOS tillåter Bambuddy att nå det lokala nätverket.`,warn_unsigned:`Den Python som kör Bambuddy har ingen kodsignatur, så macOS har inget att koppla en lokal nätverksbehörighet till och släpper tyst varje anslutning till skrivaren - inget fel och ingen prompt. Kör Bambuddy-uppdateringen (install/update_macos.sh), som signerar den, starta sedan om Bambuddy. Tolk: {{executable}}`,warn_permission:`Om skrivaren är påslagen och på den här adressen, öppna Systeminställningar > Sekretess & säkerhet > Lokalt nätverk och se till att den Python som kör Bambuddy är aktiverad. macOS släpper lokala anslutningar tyst när det inte är det, och uppdatering av Python kan lämna den gamla behörigheten bakom sig.`},network_mode:{title:`Docker-nätverksläge`,genericRuntime:`en container`,pass:`Körs i {{runtime}} med värdnätverk.`,warn:`Bambuddy körs i {{runtime}} med bryggnätverk. Skrivaruppäckt och den virtuella skrivaren kräver värdnätverksläge — skapa containern igen i värdnätverksläge ("network_mode: host" i docker-compose, "--network=host" för Podman).`,skip:`Körs inte i Docker — inte tillämpligt.`,skip_unknown:`Bambuddy körs i {{runtime}}, men dess nätverksläge kunde inte fastställas. Om skrivarupptäckt eller den virtuella skrivaren inte fungerar, återskapa containern med värdnätverk.`,skip_system_container:`Bambuddy körs i en {{runtime}} systemcontainer, som sitter på LAN som en virtuell maskin — inte tillämpligt.`},subnet:{title:`Nätverkssubnät`,pass:`Skrivaren och Bambuddy är på samma subnät.`,warn:`Skrivaren ({{printer_ip}}) och Bambuddy ({{host_ip}}) är på olika subnät. De kan inte nå varandra om inte routning mellan subnäten är konfigurerad.`,skip:`Subnät kunde inte bestämmas — hoppade över.`},mqtt_auth:{title:`Skrivarens inloggningsuppgifter`,pass:`Skrivaren accepterade anslutningen.`,fail:`Skrivaren är åtkomlig men Bambuddy är inte ansluten till den. Åtkomstkoden eller serienumret är troligen fel — åtkomstkoden ändras varje gång LAN Only eller Utvecklarläge växlas, så kopiera den från skrivarens skärm igen. En skrivare som startar om, eller redan har nått sin gräns för samtidiga anslutningar, kan se ut på samma sätt.`,fail_auth_rejected:`Skrivaren avvisade Bambuddys inloggningsuppgifter. Åtkomstkoden eller serienumret är fel — åtkomstkoden ändras varje gång LAN Only eller Utvecklarläge växlas, så kopiera den från skrivarens skärm och spara den i skrivarinställningarna.`,skip:`Kontrollerades inte — skrivaren kunde inte nås.`},developer_mode:{title:`LAN-utvecklarläge`,pass:`Utvecklarläge är aktiverat.`,fail:`Utvecklarläge är AV på skrivaren. Aktivera det i skrivarens LAN-inställningar — och bekräfta med OK. Utan det kommer utskrifter inte att starta.`,skip:`Kunde inte kontrolleras — kräver en aktiv anslutning till skrivaren.`},printer_publishing:{title:`Skrivaren publicerar status`,pass:`Skrivaren publicerar statusuppdateringar — AMS, filament och K-profiler kommer att speglas korrekt till slicern.`,fail:`MQTT-mäklaren accepterade anslutningen men skrivaren har inte publicerat några statusrapporter. Detta är nästan alltid ett felaktigt serienummer eller ett serienummer med felaktigt skiftläge — device/<serial>/report är skiftlägeskänsligt. Dubbelkolla serienumret i skrivarinställningarna mot skärmen på skrivaren.`,skip:`Kunde inte kontrolleras — kräver en aktiv anslutning till skrivaren.`}}},systemHealth:{sectionTitle:`Systemhälsa`,sectionDescription:`Söker i senaste loggar efter kända problem som du vanligtvis kan åtgärda själv, innan de blir till ett supportärende.`,rescan:`Sök igen`,clean:`Inga kända problem hittade i de senaste {{times}} loggposterna.`,logUnavailable:`Filloggning är inaktiverad, så loggar kan inte sökas. Aktivera filloggning för att använda denna kontroll.`,learnMore:`Hur du åtgärdar`,fixLabel:`Åtgärd:`,occurrences:`Set {{times}}× — senast {{lastSeen}}`,category:{layer8:`Du kan åtgärda detta`,environment:`Miljö`,bug:`Rapportera detta`},signature:{"ftp-auth-rejected":{name:`Skrivaren avvisade åtkomstkoden`,cause:`Skrivaren vägrade filöverföringsinloggningen. Åtkomstkoden är fel, eller den ändrades efter att Utvecklarläge växlats.`,fix:`Kopiera åtkomstkoden från skrivarens skärm (LAN-inställningar) och uppdatera den i skrivarens inställningar i Bambuddy.`},"ftp-connection-timeout":{name:`Filöverföringsanslutning timeout`,cause:`Bambuddy kunde inte nå skrivarens filöverföringsport (FTPS 990). Porten är blockerad, eller skrivaren är av eller på ett annat subnät.`,fix:`Se till att inget blockerar port 990 mellan Bambuddy och skrivaren, och att båda är på samma nätverk.`},"ftp-ssl-error":{name:`Säker filöverförings-handskak misslyckades`,cause:`Skrivarens filservice svarade på port 990 utan TLS. Dess filserver har fastnat — ett fel på skrivarsidan, inte ett brandväggs- eller firmware-problem.`,fix:`Starta om skrivaren. Tills dess kan utskriftsfiler, omslag och timelapse inte hämtas; själva utskriften påverkas inte.`},"bambu-cloud-captcha":{name:`Bambu Cloud begär en CAPTCHA`,cause:`Bambus anti-missbrukslager utmanar detta nätverk, så ingen Bambu Cloud-inloggning kan slutföras. Det är kopplat till den offentliga IP-adressen, inte till ditt konto eller denna installation.`,fix:`Vänta — det löser sig normalt inom några timmar, och upprepade inloggningsförsök förlänger det. För att ansluta under tiden, logga in med en åtkomsttoken som tas från en webbläsarsession.`},"mqtt-connection-flapping":{name:`Skrivaranslutningen kopplas bort upprepade gånger`,cause:`Kontrollanslutningen (MQTT 8883) kopplas bort och ansluter upprepade gånger — vanligtvis en svag nätväg eller en delvis blockerad port.`,fix:`Kontrollera Wi-Fi-signalen vid skrivaren, föredra en trådbunden anslutning och se till att port 8883 är pålitligt åtkomlig.`},"camera-connection-refused":{name:`Kameraström otillgänglig`,cause:`Live-kameran kunde inte nås på port RTSPS 322. Porten är blockerad, eller kameran eller LAN-livevy är av på skrivaren.`,fix:`Aktivera kameran och LAN-livevy på skrivaren, och se till att port 322 inte blockeras. Detta påverkar inte utskriften.`},"database-locked":{name:`Databas-skrivkonflikt`,cause:`SQLite-databasen får "databas är låst"-fel under belastning — vanligt när flera skrivare körs samtidigt.`,fix:`Växla Bambuddy till en extern PostgreSQL-databas. Se PostgreSQL-guiden i dokumentationen.`}}},vpDiagnostic:{title:`Inställningskontroll — {{name}}`,runButton:`Kör inställningskontroll`,running:`Kör inställningskontroll...`,runFailed:`Kunde inte köra inställningskontrollen: {{error}}`,retry:`Kör igen`,overall:{ok:`Alla kontroller godkända — denna virtuella skrivare är korrekt konfigurerad.`,warnings:`Den virtuella skrivaren bör fungera, men vissa saker behöver uppmärksamhet.`,problems:`Hittade problem som förklarar varför slicern inte kan se eller använda denna virtuella skrivare.`},check:{enabled:{title:`Virtuell skrivare aktiverad`,fail:`Denna virtuella skrivare är avstängd. Växla på den för att göra den upptäckbar.`},running:{title:`Tjänster körs`,fail:`Den virtuella skrivaren är aktiverad men dess tjänster körs inte. Kontrollera Bambuddy-loggen — en bind-IP-konflikt eller ett behörighetsfel stoppar vanligtvis dem.`},bind_interface:{title:`Bind nätverksgränssnitt`,fail:`Bind-gränssnittet är inte inställt, eller existerar inte längre på denna värd. Välj ett aktuellt gränssnitt i rullisten Bind-gränssnitt.`},access_code:{title:`Åtkomstkod inställd`,fail:`Ingen åtkomstkod är inställd. Slicern måste ges samma 8-teckens åtkomstkod som du ställt in här.`},target_printer:{title:`Målskrivare`,fail:`Ingen målskrivare är vald. Proxyläge behöver en riktig skrivare att vidarebefordra till.`,warn:`Målskrivaren är offline just nu — vidarebefordring kommer att återupptas när den ansluter igen.`},port_ftps:{title:`Filuppladdningstjänst (port {{port}})`,fail:`Inget lyssnar på port {{port}} för bind-IP, så slicern kan inte ladda upp filer. En portkonflikt på detta gränssnitt är den vanliga orsaken.`},port_mqtt:{title:`Kontrolltjänst (port {{port}})`,fail:`Inget lyssnar på port {{port}} för bind-IP, så slicern kan inte ansluta eller visa status.`},port_bind:{title:`Söktjänst (port {{port}})`,fail:`Inget lyssnar på port {{port}} för bind-IP, så slicerns upptäcknings-handskak misslyckas.`},privileged_ports:{title:`Privilegerad portbindning`,fail:`Port {{port}} är under 1024, och denna tjänst har inte behörighet att binda den — varför inget lyssnar ovan. Lägg till AmbientCapabilities=CAP_NET_BIND_SERVICE till /etc/systemd/system/bambuddy.service och starta om, eller kör "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))". För Docker, lägg till cap_add: [NET_BIND_SERVICE].`},certificate:{title:`TLS-certifikat`,pass:`Certifikat redo. Se till att Bambuddy-CA-certifikatet (ovan) importeras till din slicerns betroddelagring.`,fail:`TLS-certifikatet för denna virtuella skrivare saknas. Kontrollera att Bambuddy-datakatalogen är skrivbar.`}}},bugReport:{title:`Rapportera ett fel`,description:`Beskrivning`,descriptionPlaceholder:`Vad gick fel? Beskriv problemet...`,email:`E-post (valfritt)`,emailPlaceholder:`din@e-post.com`,emailPrivacy:`Om den anges kommer din e-post att inkluderas i en ihopfälld sektion av GitHub-ärendet så att underhållaren kan följa upp.`,screenshot:`Skärmdump`,uploadOrPaste:`Ladda upp, klistra in eller dra en bild`,dataCollectedSummary:`Vilken data inkluderas i rapporten?`,dataIncluded:`Inkluderad:`,dataIncludedList:`App-version, OS, arkitektur, Python-version, databasstatistik (endast räknare), skrivarmodeller, munstyckesantal, firmwareversioner, anslutningsstatus, integrationsstatus (Spoolman, MQTT, HA), icke-känsliga inställningar, nätverksgränssnittsantal, Docker-detaljer, beroendeversioner.`,dataNeverIncluded:`Inkluderas aldrig:`,dataNeverIncludedList:`Skrivarnamn, serienummer, åtkomstkoder, lösenord, IP-adresser, e-postadresser, API-nycklar, tokens, webhook-URL:er, värdnamn eller användarnamn.`,submit:`Skicka in`,startLogging:`Starta felsökningsloggning`,stepEnableLogging:`Felsökningsloggning aktiverad`,stepReproduce:`Återskapa problemet nu`,stepStopLogging:`Stoppa och skicka in rapport`,stopAndSubmit:`Stoppa och skicka in`,maxDuration:`Stoppar automatiskt efter {{minutes}} min`,stoppingLogs:`Samlar in loggar och skickar in...`,submitting:`Skickar in felrapport...`,submittingStepConnection:`Kör skrivaranslutningskontroller`,submittingStepVirtualPrinters:`Kör inställningskontroller för virtuella skrivare`,submittingStepLogScan:`Söker i senaste loggar efter kända problem`,submittingStepSubmit:`Skickar in rapport till GitHub`,submitSuccess:`Felrapport skickad in!`,submitFailed:`Kunde inte skicka in felrapport`,diagnosticChecking:`Kontrollerar skrivaranslutningar...`,diagnosticHealthy:`Anslutningskontroll godkänd — inga problem hittade på dina skrivare.`,diagnosticSummary:`{{problems}} av {{total}} skrivare har anslutningsproblem`,diagnosticIntro:`En eller flera skrivare har ett anslutningsproblem som kan orsaka ditt problem. Fäll ut en skrivare nedan för att se åtgärden — att lösa det kan lösa problemet utan en felrapport. Du kan fortfarande skicka in en rapport nedan.`,logHealthSummary:`Kända problem hittade i dina loggar`,logHealthIntro:`Senaste loggar matchar kända problem. Kontrollera åtgärderna nedan — att lösa dem kan lösa ditt problem utan en felrapport. Du kan fortfarande skicka in en rapport nedan.`,thankYou:`Tack!`,submitted:`Din felrapport har skickats in.`,viewIssue:`Visa ärende`,closeKeepsRecording:`Du kan stänga den här panelen medan du återskapar problemet – inspelningen fortsätter och om du öppnar den igen kommer du tillbaka hit.`,resumeRecording:`Buggrapport spelar in — {{elapsed}}. Klicka för att avsluta.`,resumeReport:`Återuppta rapportering`,unexpectedError:`Ett oväntat fel uppstod`},failureDetection:{title:`AI-feldetektering`,description:`Övervaka utskrifter med ett självhostat Obico ML-API och agera automatiskt på upptäckta fel.`,mlUrl:`Obico ML-API-URL`,mlUrlHint:`Bas-URL för din självhostade Obico ml_api-container (t.ex. http://192.168.1.10:3333).`,mlToken:`ML-API-token (valfritt)`,mlTokenPlaceholder:`Lämna tomt om servern körs utan ML_API_TOKEN`,mlTokenHint:`Måste matcha ML_API_TOKEN-miljövariabeln för din Obico ml_api-container. Lämna tomt när containern körs utan en.`,test:`Test`,testSuccess:`ML-API åtkomlig och frisk.`,testSuccessTokenUnknown:`ML-API åtkomlig och frisk. Token kunde inte kontrolleras.`,testFailed:`Kunde inte nå ML-API:et.`,sensitivity:`Känslighet`,sensitivityLow:`Låg (färre falska larm)`,sensitivityMedium:`Medium (balanserad)`,sensitivityHigh:`Hög (upptäck tidigt, fler falska larm)`,sensitivityHint:`Justerar konfidens-trösklarna som utlöser varningar och fel.`,action:`Åtgärd vid upptäckt fel`,actionNotify:`Notisera endast`,actionPause:`Pausa utskrift`,actionPauseOff:`Pausa och bryt ström`,pollInterval:`Avläsningsintervall (sekunder)`,pollIntervalHint:`Hur ofta varje skrivare ska kontrollera medan den skriver ut. Minimum 5s, maximum 120s.`,externalUrlMissing:`Extern URL är inte inställd.`,externalUrlHint:`ML-API:et hämtar kamerans ögonblicksbild via URL. Sätt den externa URL:en i Allmänna inställningar så att ML-API-containern kan nå Bambuddy.`,perPrinterTitle:`Övervakade skrivare`,perPrinterHint:`Välj vilka skrivare som övervakningstjänsten ska bevaka.`,monitorAll:`Övervaka alla anslutna skrivare`,statusTitle:`Status`,serviceRunning:`Tjänst körs`,thresholds:`Låga / Hög tröskelvärden`,activePrinters:`Aktiva utskrifter`,noActivePrints:`Inga utskrifter körs för närvarande.`,historyTitle:`Senaste upptäckter`,noHistory:`Inga upptäckter än.`},makerworld:{title:`MakerWorld`,description:`Klistra in en MakerWorld-modell-URL för att importera och skriva ut den direkt från Bambuddy — utan att lämna för Bambu Handy-app.`,pasteUrlHeader:`Importera från MakerWorld`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… eller klistra in valfri MakerWorld-länk`,resolveButton:`Lös`,signInRequiredTitle:`Bambu Cloud-inloggning krävs för nedladdning`,signInRequiredBody:`Du kan bläddra bland modelldetaljer anonymt, men MakerWorld kräver ett Bambu Cloud-konto för att ladda ner 3MF-filer.`,signInExpiredTitle:`Bambu Cloud-inloggning har löpt ut`,signInExpiredBody:`Du är fortfarande inloggad på Bambuddy, men Bambu Lab har slutat acceptera den lagrade token, så nedladdningar kommer att misslyckas. Logga in på Bambu Cloud igen.`,openCloudSettings:`Öppna molninställningar`,untitledModel:`Namnlös modell`,byCreator:`av {{name}}`,downloadsCount:`{{count}} nedladdningar`,licensePrefix:`Licens`,alreadyImported:`Redan importerad`,openOnMakerworld:`Öppna på MakerWorld`,alreadyInLibrary:`Denna modell finns redan i ditt bibliotek — hitta den i Filhanterare → MakerWorld`,importSuccess:`Importerade {{filename}} — sparad i Filhanterare → MakerWorld`,platesHeader:`Plattor ({{count}})`,plateDefaultName:`Platta {{n}}`,materialCount:`{{count}} filament`,amsRequired:`AMS krävs`,slicedFor:`Slicad för {{printer}}`,alsoCompatible:`Markerad som kompatibel med: {{printers}}`,importToLibrary:`Spara`,sliceIn:`Spara och slica i {{slicer}}`,disclaimer:`MakerWorld-integration använder community-dokumenterade API-ändpunkter. Bambuddy är inte ansluten till eller godkänd av MakerWorld eller Bambu Lab.`,lastImportSuccess:`Importerad till ditt bibliotek`,lastImportAlreadyInLibrary:`Finns redan i ditt bibliotek`,viewInLibrary:`Visa i Filhanterare`,openInBambuStudio:`Öppna i Bambu Studio`,openInOrcaSlicer:`Öppna i OrcaSlicer`,importTo:`Importera till filhanterare`,recentImportsHeader:`Senaste importen`,phaseResolving:`Löser`,phaseDownloading:`Laddar ner`,folderAuto:`MakerWorld (standard)`,importAll:`Importera alla`,importAllProgress:`Importerar {{current}}/{{total}}`,openGallery:`Öppna bildgalleri`,galleryPrev:`Föregående bild`,galleryNext:`Nästa bild`,deleteImport:`Ta bort från bibliotek`,importDeleting:`Tar bort...`,importDeleted:`Borttagen från bibliotek`,confirmDelete:`Ta bort {{filename}} från biblioteket? Detta tar bort den lokala filen men plattan kan importeras om från MakerWorld.`,errors:{resolveFailed:`Kunde inte lösa den MakerWorld-URL:en.`,downloadFailed:`Kunde inte ladda ner. Försök igen.`,deleteFailed:`Kunde inte ta bort filen från biblioteket.`}},gcodeViewer:{filamentSlot:`Filament {{n}}`,loading:`Läser verktygssökväg…`,loadFailed:`Kunde inte ladda G-koden för denna fil.`,showTravel:`Rörelse`,topLayer:`Topplager`,bottomLayer:`Bottenlager`,noSource:`Ingen fil gavs för förhandsgranskning.`,view:{filament:`Filament`,feature:`Särdrag`,height:`Höjd`,width:`Bredd`},feature:{wall:`Väggar`,sparseInfill:`Gles utfyllnad`,solidInfill:`Solid utfyllnad`,bridge:`Brygga / överhäng`,support:`Stöd`,skirt:`Kant / brätte`,gapFill:`Mellanrumsifyllnad`,ironing:`Strykning`,primeTower:`Primtorn`},back:`Tillbaka`,backToArchives:`Tillbaka till utskriftsarkiv`,backToFiles:`Tillbaka till Filhanterare`,plates:`Plattor`,plateN:`Platta {{n}}`},libraryTrash:{title:`Papperskorgen`,headerButton:`Papperskorgen`,headerTooltip:`Visa filer som flyttats till papperskorgen`,backToFiles:`Tillbaka till Filhanterare`,subtitleAdmin:`Borttagna filer stannar här i {{days}} dagar, sedan raderas de automatiskt. Denna vy visar filer i papperskorgen för alla användare.`,subtitleUser:`Borttagna filer stannar här i {{days}} dagar, sedan raderas de automatiskt.`,loading:`Laddar papperskorgen…`,loadError:`Kunde inte ladda papperskorgen.`,empty:`Papperskorgen är tom.`,summary:`{{count}} filer · {{size}}`,emptyTrash:`Töm papperskorgen`,restore:`Återställ`,purgeNow:`Ta bort nu`,autoPurgeIn:`Raderas automatiskt om {{when}}`,days:`dagar`,retentionLabel:`Automatisk radering efter`,selectAll:`Markera alla`,selectOne:`Markera {{filename}}`,selectionCount:`{{count}} markerade`,bulkRestore:`Återställ markerade`,bulkPurge:`Ta bort markerade`,col:{filename:`Fil`,folder:`Mapp`,size:`Storlek`,deleted:`Flyttad till papperskorgen`,autoPurge:`Automatisk radering`,owner:`Ägare`,actions:`Åtgärder`},confirm:{purgeTitle:`Ta bort permanent?`,purgeBody:`{{filename}} kommer att tas bort från disken och kan inte återställas.`,emptyTitle:`Töm papperskorgen?`,emptyBody:`Alla {{count}} filer kommer att tas bort från disken. Detta kan inte ångras.`,bulkPurgeTitle:`Ta bort markerade filer permanent?`,bulkPurgeBody:`De {{count}} markerade filerna kommer att tas bort från disken och kan inte återställas.`,cta:`Ta bort permanent`},toast:{restored:`Fil återställd.`,restoreFailed:`Kunde inte återställa filen.`,purged:`Fil borttagen permanent.`,purgeFailed:`Kunde inte ta bort filen.`,emptied:`Tog bort {{count}} fil(er) från papperskorgen.`,emptyFailed:`Kunde inte tömma papperskorgen.`,retentionSaved:`Automatisk radering inställd på {{days}} dagar.`,retentionFailed:`Kunde inte spara inställningen för automatisk radering.`,bulkRestored:`Återställde {{count}} fil(er).`,bulkPurged:`Tog bort {{count}} fil(er).`}},libraryPurge:{title:`Rensa gamla filer`,headerButton:`Rensa gamla`,headerTooltip:`Massflytta gamla filer till papperskorgen`,description:`Rensa ut gamla filer från ditt bibliotek i ett svep. Filer med utskriftshistorik åldras efter deras senaste utskriftsdatum; filer som aldrig skrivits ut åldras efter deras uppladdningsdatum.`,ageLabel:`Flytta filer äldre än`,days:`dagar`,includeNeverPrinted:`Inkludera filer som aldrig skrivits ut`,effectsTitle:`Vad händer när du klickar på Rensa`,effect1:`Matchande filer flyttas till Papperskorgen — de raderas inte från disken än.`,effect2:`Du kan återställa dem från Papperskorgen när som helst tills behållningsfönstret löper ut.`,effect3:`Efter behållningstiden rensar papperskorgen dem permanent från disken.`,effect4:`Filer i externa (länkade) mappar hoppas över — Bambuddy raderar aldrig byte som den inte äger.`,previewLoading:`Kontrollerar hur många filer som matchar…`,previewFailed:`Kunde inte förhandsgranska rensningen.`,previewSummary:`{{count}} filer · {{size}} kommer att flyttas till papperskorgen`,andMore:`…och {{count}} till`,warning:`Filer i papperskorgen räknas fortfarande mot lagringen tills behållningsfönstret löper ut. Töm Papperskorgen därefter för att frigöra diskutrymme omedelbart.`,confirmCta:`Flytta {{count}} till papperskorgen`,purging:`Flyttar till papperskorgen…`,toast:{success:`Flyttade {{count}} fil(er) till papperskorgen.`,failed:`Kunde inte rensa filer.`}},libraryAutoPurge:{enableLabel:`Auto-rensa gamla filer`,enableDescription:`Kör den administrativa rensningen en gång per dag. Filer går till Papperskorgen först — de raderas inte omedelbart.`,ageLabel:`Auto-rensa filer äldre än`,ageDescription:`Minimum 7 dagar, maximum 10 år. Använder samma åldersregel som den manuella Rensa-knappen.`,days:`dagar`,includeNeverPrinted:`Inkludera filer som aldrig skrivits ut`,saveFailed:`Kunde inte spara inställningar för auto-rensning.`},archivePurge:{headerButton:`Rensa gamla`,headerTooltip:`Massradera gamla arkiv`,title:`Rensa gamla arkiv`,description:`Rensa ut gammal utskriftshistorik. Varje arkiv åldras efter dess senaste utskrifts slutförande — omutskrift av ett arkiv uppdaterar dess ålder, så aktivt arbete raderas aldrig.`,ageLabel:`Radera arkiv som inte skrivits ut på`,days:`dagar`,effectsTitle:`Vad händer när du klickar på Rensa`,effect1:`Varje matchande arkiv döljs från listorna och dess filer tas bort från disken (3MF, minibild, timelapse, käll-3MF, F3D-designfil, foton).`,effect2:`Arkivraden förblir i databasen så att Snabbstatistik behåller filament-, tid-, kostnads- och energibidraget — samma som standard för radering av enskilt arkiv.`,effect3:`Kryssa i "Ta också bort från statistik" nedan för att ta bort Snabbstatistik-bidraget också (matchar alternativet för radering av enskilt arkiv). Den vägen är oåterkallelig.`,effect4:`Omutskrift av ett arkiv uppdaterar dess åldersklocka, så arkiv som du fortfarande använder är säkra.`,purgeStatsLabel:`Ta också bort från statistik`,purgeStatsHint:`Tar bort de matchande arkiven från Snabbstatistik (filament, tid, kostnad, energi). Utan detta behåller Snabbstatistik varje bidrag och endast filerna lämnar disken.`,previewLoading:`Kontrollerar hur många arkiv som matchar…`,previewFailed:`Kunde inte förhandsgranska rensningen.`,previewSummary:`{{count}} arkiv · {{size}} kommer att tas bort`,andMore:`…och {{count}} till`,warning:`Filer tas bort från disken och kan inte återställas. Ladda ner eller markera som favorit allt du vill behålla innan du fortsätter.`,confirmCta:`Ta bort {{count}} arkiv`,purging:`Tar bort…`,toast:{success:`Tog bort {{count}} arkiv.`,failed:`Kunde inte rensa arkiv.`}},archiveAutoPurge:{enableLabel:`Auto-rensa gamla arkiv`,enableDescription:`En gång per dag döljs arkiv från listorna och deras filer tas bort från disken när de inte har skrivits ut inom tröskelvärdet. Omutskrift av ett arkiv återställer klockan.`,ageLabel:`Auto-radera arkiv som inte skrivits ut på`,ageDescription:`Minimum 7 dagar, maximum 10 år. Baserat på det senaste utskrifts slutförandet — omutskrift av ett arkiv uppdaterar dess ålder. Tar bort 3MF, minibild, timelapse, käll-3MF, F3D och foton.`,days:`dagar`,purgeStatsLabel:`Ta också bort från statistik`,purgeStatsDescription:`När aktiverat tar den dagliga rensaren också bort varje rensat arkiv från Snabbstatistik (filament, tid, kostnad, energi). Standard av — Snabbstatistik behåller bidraget, endast filerna lämnar disken.`,runNow:`Rensa arkiv nu`,saveFailed:`Kunde inte spara inställningar för auto-rensning.`},cameraTokens:{scope:{camera_stream:`Kameraström`,camwall:`Kameravägg`,overlay:`Strömningsöverlägg`},title:`Kamera-API-tokens`,navTitle:`Kamera-API-tokens`,description:`Långlivade tokens för att bädda in kameraströmmen i Home Assistant, Frigate, kiosker eller något annat verktyg som behöver en stabil URL. Välj omfång när du skapar en; en token kan återkallas när som helst.`,loading:`Laddar…`,confirmRevoke:{title:`Återkalla denna token?`,body:`All enheter som använder "{{name}}" kommer att förlora åtkomsten omedelbart. Detta kan inte ångras.`,cancel:`Avbryt`,confirm:`Återkalla`},create:{scopeLabel:`Omfång`,hintCameraStream:`En kameraström-token kan endast hämta kameraströmmar och ögonblicksbilder. Använd den för Home Assistant, Frigate eller något som bäddar in en enda kamera.`,hintCamWall:`En Kameravägg-token öppnar /camwall på en skärm utan inloggning. Den kan se alla skrivares namn och status, och deras kameraströmmar. Den kan inte se filnamn, adresser eller åtkomstkoder.`,hintOverlay:`En Strömningsöverlägg-token öppnar /overlay/{printerId} på en skärm utan inloggning — för OBS eller någon livestream. Den kan se en skrivares kameraström plus dess live utskriftsstatus, inklusive filnamnet som visas på skärmen. Den kan inte se adresser eller åtkomstkoder.`,title:`Skapa ny token`,nameLabel:`Token-namn`,namePlaceholder:`t.ex. Home Assistant`,daysLabel:`Dagar till utgång`,submit:`Skapa`,hint:`Maximal livstid är 365 dagar. Token-värdet visas endast en gång vid skapande — kopiera det nu.`},created:{camWallUrlTitle:`Kameravägg-URL för denna display`,camWallUrlHint:`Öppna detta på skärmen. Vem som helst som kan läsa URL:en kan titta på väggen, så behandla den som en nyckel — återkalla token för att koppla bort display.`,overlayUrlTitle:`Överläggs-URL för OBS`,overlayUrlHint:`Lägg till detta som en Browser Source i OBS. Ändra /overlay/1 numret till din skrivares nummer (från dess URL på Skrivarsidan). Vem som helst som kan läsa URL:en kan titta på strömmen, så behandla den som en nyckel — återkalla token för att koppla bort den.`,title:`Token skapad — kopiera den nu`,warning:`Detta är det enda tillfället denna token kommer att visas. När du stänger denna dialogruta kan du aldrig visa den igen.`,copy:`Kopiera`,dismiss:`Jag har sparat den`},list:{scope:`Omfång`,myTitle:`Mina tokens`,allTitle:`Alla användare (admin-vy)`,empty:`Inga tokens än.`,name:`Namn`,owner:`Ägare`,prefix:`Prefix`,created:`Skapad`,expires:`Utgår`,lastUsed:`Senast använd`,revoke:`Återkalla`,expired:`Utgången`},toast:{created:`Token skapad`,createFailed:`Kunde inte skapa token`,revoked:`Token återkallad`,revokeFailed:`Kunde inte återkalla token`,loadFailed:`Kunde inte ladda tokens`,copied:`Kopierad till urklipp`,copyFailed:`Kunde inte kopiera — markera och kopiera manuellt`}},forecast:{title:`Prognos`,noSpools:`Inga aktiva rullar hittade. Lägg till rullar till din inventering för att se prognosdata.`,noUsageData:`Inga användningsdata tillgängliga — kan inte projicera lagertidslinje.`,sku:`SKU`,material:`Material`,stock:`Lager`,dailyRate:`Förbrukning`,daysLeft:`Dagar kvar`,emptyBy:`Tomt den`,reorderBy:`Beställ senast`,actions:`Åtgärder`,trend:`Trend`,estimated:`Uppskattad`,noData:`Ingen data`,timeframe:`Tidsram`,chartTitle:`Projicerat lager — Topp 5 material`,dashedLinesROP:`Streckade linjer = beställningspunkter`,stockLevel:`Lagernivå`,reorderPoint:`Beställningspunkt`,safetyMargin:`Säkerhetsmarginal`,trendLegend:`Trend (historikbaserad, 95% servicenivå)`,estimatedLegend:`Uppskattad (viktskillnad)`,noDataLegend:`Ingen data`,ropLabel:`ROP`,ssLabel:`SS`,safetyStockLegend:`Reservlager`,stockArrivalLegend:`Lagerankomst`,stockoutLegend:`Lagerslut`,alertCount_one:`{{count}} varning`,alertCount_other:`{{count}} varningar`,order:`Beställ`,save:`Spara`,cancel:`Avbryt`,settingsSaved:`Inställningar sparade`,failedSaveSettings:`Kunde inte spara inställningar`,globalLeadTimeSaved:`Global ledtid sparad`,globalLeadTime:`Global ledtid`,globalLeadTimeHint:`Global ledtidsbas — används i beräkning av beställningspunkt för alla SKU:er`,skuLeadTimeOverride:`Åsidosätt ledtid`,skuLeadTimeHint:`0 = använd global ledtid. Sätt >0 för att åsidosätta för denna SKU.`,safetyMarginLabel:`Säkerhetsmarginal`,effectiveLeadTime:`Effektiv ledtid`,effectiveLeadTimeHint:`max(global {{global}}d, SKU {{sku}}d)`,reorderPointHint:`d̄ × LT + säkerhetsmarginal — beställ när lagret når denna nivå`,safetyMarginHint:`Statistisk säkerhetslager (z=1,65 × σ × √LT) + användardefinierad buffert`,safetyMarginHintDays:`Buffert som läggs till på den statistiska säkerhetslagret.{{approx}}`,safetyMarginHintDaysApprox:` ≈ {{g}}g vid aktuell förbrukning.`,safetyMarginHintG:`Fast viktbuffert som läggs till på den statistiska säkerhetslagret.{{approx}}`,safetyMarginHintGApprox:` ≈ {{days}}d vid aktuell förbrukning.`,individualSpools:`Enskilda rullar`,labelWeight:`Etikett`,spoolCount_one:`{{count}} rulle`,spoolCount_other:`{{count}} rullar`,stockBreakRisk:`Risk för lagerslut`,stockBreakDetail:`{{days}} dagar kvar, ledtid {{lt}} dagar.`,stockBreakBefore:`Lagerslut före påfyllning`,reorderNow:`Beställ nu`,reorderTriggerPassed:`Utlösningsdatum {{date}} har passerat.`,shoppingList:`Inköpslista`,shoppingListItems_one:`({{count}} artikel)`,shoppingListItems_other:`({{count}} artiklar)`,shoppingListEmpty:`Inköpslistan är tom. Klicka på varukorgsikonen på valfri rad för att lägga till artiklar.`,addToCart:`Lägg till i inköpslista`,alertsSnoozed:`Tysta varningar för denna SKU`,alertsEnabled:`Aktivera varningar för denna SKU`,addedToCart:`Lagt till i inköpslista`,failedAddItem:`Kunde inte lägga till artikel`,listView:`Lista`,logisticsView:`Logistik`,qty:`Antal`,weight:`Vikt`,leadTime:`Ledtid`,expectedRestock:`Förväntad påfyllning`,status:`Status`,note:`Anteckning`,pending:`Väntande`,purchased:`Inköpt`,received:`Mottagen`,markPurchased:`Markera som inköpt`,markReceived:`Markera som mottagen — lägger till rullar i Lagerinventering`,resetToPending:`Återställ till väntande`,remove:`Ta bort`,clearAll:`Rensa alla`,downloadCsv:`CSV`,addToCartTitle:`Lägg till i inköpslista`,byQuantity:`Efter kvantitet`,byDuration:`Efter varaktighet`,numberOfSpools:`Antal rullar`,lastHowManyDays:`Bör räcka hur många dagar?`,noUsageQty:`Ingen användningsdata — kvantitet inställd på 1.`,noteOptional:`Anteckning (valfritt)`,notePlaceholder:`t.ex. för projekt X, brådskande…`,addNSpools_one:`Lägg till {{count}} rulle`,addNSpools_other:`Lägg till {{count}} rullar`,onArrival:`Vid ankomst`,stockBreakIn:`Lagerslut om {{days}} dagar.`,stockRunsOutBefore:`Lagret tar slut innan ledtiden {{lt}} dagar har passerat.`,atRate:`Vid {{rate}}g/dag behöver du`,moreSpools_one:`{{count}} rulle till`,moreSpools_other:`{{count}} rullar till`,bridgeGap:`för att överbrygga gapet.`,noReadAccess:`Du har inte behörighet att visa lagerprognoser.`,noWriteAccess:`Du har inte behörighet att modifiera prognosinställningar.`}}},tr:{translation:{nav:{printers:`Yazıcılar`,archives:`Arşivler`,queue:`Baskı Kuyruğu`,stats:`İstatistikler`,profiles:`Profiller`,maintenance:`Bakım`,projects:`Projeler`,inventory:`Filament`,finance:`Finans`,files:`Dosya Yöneticisi`,makerworld:`MakerWorld`,notifications:`Bildirimler`,settings:`Ayarlar`,system:`Sistem`,collapseSidebar:`Kenar çubuğunu daralt`,expandSidebar:`Kenar çubuğunu genişlet`,update:`Güncelle`,updateAvailable:`Güncelleme mevcut: v{{version}}`,updateAvailableBanner:`{{version}} sürümü kullanılabilir!`,viewUpdate:`Güncellemeyi gör`,viewOnGithub:`GitHub'da gör`,keyboardShortcuts:`Klavye kısayolları (?)`,switchToLight:`Açık moda geç`,switchToDark:`Koyu moda geç`,switchToSystem:`Sistem moduna geç`,smartSwitches:`Akıllı Anahtarlar`,logout:`Çıkış`,installApp:`Uygulamayı yükle`,installAppSuccess:`Bambuddy yüklendi`},common:{plusNMore:`+{{count}} tane daha`,save:`Kaydet`,saving:`Kaydediliyor...`,cancel:`İptal`,delete:`Sil`,edit:`Düzenle`,add:`Ekle`,close:`Kapat`,confirm:`Onayla`,loading:`Yükleniyor...`,error:`Hata`,errorLoading:`Veri yüklenirken hata`,retry:`Yeniden dene`,success:`Başarılı`,warning:`Uyarı`,enabled:`Etkin`,disabled:`Devre dışı`,yes:`Evet`,no:`Hayır`,on:`Açık`,off:`Kapalı`,all:`Tümü`,none:`Hiçbiri`,search:`Ara`,filter:`Filtrele`,sort:`Sırala`,refresh:`Yenile`,download:`İndir`,upload:`Yükle`,uploading:`Yükleniyor...`,uploadFailed:`Yükleme başarısız`,actions:`İşlemler`,status:`Durum`,name:`Ad`,description:`Açıklama`,date:`Tarih`,time:`Saat`,hours:`saat`,minutes:`dakika`,seconds:`saniye`,days:`gün`,enable:`Etkinleştir`,disable:`Devre dışı bırak`,permissions:`İzinler`,noPrinters:`Yapılandırılmış yazıcı yok`,noData:`Veri yok`,linkNotFound:`Bağlantı bulunamadı`,required:`Zorunlu`,optional:`İsteğe bağlı`,dismiss:`Kapat`,apply:`Uygula`,reset:`Sıfırla`,export:`Dışa aktar`,import:`İçe aktar`,clear:`Temizle`,selectAll:`Tümünü Seç`,deselectAll:`Seçimi Kaldır`,noChange:`— Değişiklik yok —`,unchanged:`Değişmedi`,unassigned:`Atanmamış`,unknown:`Bilinmiyor`,unknownError:`Bilinmeyen hata`,today:`Bugün`,tomorrow:`Yarın`,asap:`En kısa sürede`,overdue:`Gecikmiş`,now:`Şimdi`,collapse:`Daralt`,expand:`Genişlet`,previous:`Önceki`,next:`Sonraki`,viewArchive:`Arşivi gör`,viewInFileManager:`Dosya Yöneticisinde gör`,addedBy:`{{username}} tarafından eklendi`,prints:`baskı`,more:`+{{count}} daha`,ascending:`Artan`,descending:`Azalan`,back:`Geri`,copy:`Kopyala`,copied:`Kopyalandı!`,printer:`Yazıcı`,remove:`Kaldır`,type:`Tür`,print:`Baskı`,rename:`Yeniden adlandır`,move:`Taşı`,create:`Oluştur`,duplicate:`Çoğalt`,left:`Sol`,right:`Sağ`,user:`Kullanıcı`,run:`Çalıştır`,running:`Çalışıyor...`},finance:{allTypes:`Tüm türler`,allCostCenters:`Tüm masraf merkezleri`,title:`Finans`,subtitle:`Cüzdan, kişisel işlemler ve masraf merkezleri`,noAccess:`Finans verilerini görüntüleme izniniz yok.`,personalView:`Kişisel görünüm`,adminView:`Yönetici görünümü`,createCostCenter:`Masraf merkezi oluştur`,adjustWallet:`Cüzdanı ayarla`,addManualPrint:`Manuel baskı ekle`,manageMembers:`Masraf merkezi üyelerini yönet`,currentBalance:`Kişisel bakiye`,transactions:`İşlemler`,personalTransactions:`Kişisel işlemler`,costCenters:`Masraf merkezleri`,availableForPrinting:`Baskı ataması için kullanılabilir`,costCenterName:`Ad`,budgetType:`Bütçe türü`,monthlyBudget:`Aylık bütçe`,totalBudget:`Toplam bütçe`,noBudget:`Bütçe yok`,create:`Oluştur`,selectUser:`Kullanıcı seç`,transactionType:`Tür`,amount:`Tutar`,noCostCenter:`Masraf merkezi yok`,descriptionOptional:`Açıklama (isteğe bağlı)`,applyAdjustment:`Ayarlamayı uygula`,memberCanPrint:`Üye baskı yapabilir`,addMember:`Üye ekle`,canPrint:`Baskı yapabilir`,noMembers:`Atanmış üye yok.`,editCostCenter:`Masraf merkezini düzenle`,myCostCenters:`Masraf merkezlerim`,costCentersHint:`Bütçe sınırlarını gözden geçirin ve maliyetleri kontrol altında tutun`,noCostCenters:`Masraf merkezi bulunamadı.`,owner:`Sahip`,balance:`Hesap bakiyesi`,unlimited:`Sınırsız`,budgetPolicyHint:`Hesap bakiyeleri maliyetleri kaydeder. Baskı yalnızca seçilen masraf merkezinin bütçesiyle sınırlıdır; bütçe yoksa sınırsızdır.`,budget:`Bütçe`,shared:`Paylaşılan`,cannotEditPrivateCostCenter:`Özel masraf merkezleri burada düzenlenemez`,recentTransactions:`Son işlemler`,transactionsHint:`Türe ve masraf merkezine göre filtrele`,first:`İlk`,prev:`Önceki`,next:`Sonraki`,last:`Son`,pageNumberOf:`{{total}} sayfanın {{page}}. sayfası`,noTransactions:`Kullanılabilir işlem yok.`,noTransactionsForFilter:`Seçilen filtrelerle eşleşen işlem yok.`,costCenter:`Masraf merkezi`,balanceAfter:`İşlem sonrası bakiye`,userWithId:`Kullanıcı #{{id}}`,partial:`Kısmi`,editTransaction:`İşlemi düzenle`,selectCostCenter:`Masraf merkezi seç...`,costCenterRequired:`Lütfen bir masraf merkezi seçin`,amountExample:`örn. 4,00`,manualAdjustmentExample:`örn. Manuel ayarlama`,userRequired:`Lütfen bir kullanıcı seçin`,amountInvalid:`Tutar geçerli bir sayı olmalıdır`,createdCostCenter:`Masraf merkezi oluşturuldu`,createCostCenterFailed:`Masraf merkezi oluşturulamadı`,transactionDeleted:`İşlem silindi`,deleteTransactionFailed:`İşlem silinemedi`,transactionEdited:`İşlem güncellendi ve hesap defteri yeniden hesaplandı`,editTransactionFailed:`İşlem düzenlenemedi`,manualPrintCreated:`Manuel baskı ücreti eklendi ve hesap defteri yeniden hesaplandı`,manualPrintFailed:`Manuel baskı oluşturulamadı`,memberSaved:`Üye kaydedildi`,memberSaveFailed:`Üye kaydedilemedi`,memberRemoved:`Üye kaldırıldı`,memberRemoveFailed:`Üye kaldırılamadı`,costCenterNameRequired:`Masraf merkezi adı gereklidir`,costCenterUpdated:`Masraf merkezi güncellendi`,costCenterUpdateFailed:`Masraf merkezi güncellenemedi`,confirmDeleteCostCenter:`"{{name}}" masraf merkezi silinsin mi?`,costCenterDeleted:`Masraf merkezi silindi`,costCenterDeleteFailed:`Masraf merkezi silinemedi`,deleteTransactionConfirm:`Bu işlem silinsin mi? Bakiyeler otomatik olarak yeniden hesaplanacaktır.`,deposit:`Para yatırma`,withdraw:`Para çekme`,printCharge:`Baskı ücreti`,deleteTransaction:`İşlemi sil`},printers:{title:`Yazıcılar`,addPrinter:`Yazıcı Ekle`,addPreflight:{checking:`Bağlantı kontrol ediliyor...`,warning:`Bazı bağlantı kontrolleri başarısız oldu. Bu yazıcı çevrimdışı olarak görünebilir. Aşağıdaki kontrolleri inceleyin, düzeltebileceklerinizi düzeltin veya yine de kaydedin.`,back:`Geri`,saveAnyway:`Yine de kaydet`},editPrinter:`Yazıcıyı Düzenle`,deletePrinter:`Yazıcıyı Sil`,printerName:`Yazıcı Adı`,serialNumber:`Seri Numarası`,ipAddress:`IP Adresi / Ana Bilgisayar Adı`,accessCode:`Erişim Kodu`,model:`Model`,nozzleCount:`Nozul Sayısı`,autoArchive:`Otomatik Arşivle`,status:{available:`Müsait`,idle:`Boşta`,printing:`Baskıda`,paused:`Duraklatıldı`,offline:`Çevrimdışı`,problem:`Sorun`,error:`Hata`,finished:`Tamamlandı`,unknown:`Bilinmiyor`},temperatures:{nozzle:`Nozul`,bed:`Tabla`,chamber:`Hazne`},heaterHistory:{title:`Isıtıcı Geçmişi`,openLabel:`Isıtıcı geçmişini görüntüle`,nozzle:`Nozul`,nozzle2:`Nozul 2`,bed:`Tabla`,chamber:`Hazne`,error:`Geçmiş yüklenemedi`,empty:`Henüz veri kaydedilmedi`},progress:`%{{percent}} tamamlandı`,timeRemaining:`{{time}} kaldı`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz?`,maintenanceOk:`Bakım Tamam`,maintenanceWarning:`{{count}} uyarı`,maintenanceWarning_plural:`{{count}} uyarı`,maintenanceDue:`{{count}} bekliyor`,maintenanceDue_plural:`{{count}} bekliyor`,sort:{name:`Ad`,status:`Durum`,model:`Model`,location:`Konum`,eta:`Kalan süre`,ascending:`Artan sırala`,descending:`Azalan sırala`},cardSize:{small:`Küçük kartlar`,medium:`Orta kartlar`,large:`Büyük kartlar`,extraLarge:`Çok büyük kartlar`},pageView:{openCamWallPage:`Kamera duvarını sayfa olarak aç`,cards:`Kartlar`,camWall:`Kamera duvarı`},camWall:{page:{tokenRejected:`Bu kamera duvarı bağlantısı artık geçerli değil. Belirtecin süresi dolmuş veya belirteç iptal edilmiş olabilir.`,loadFailed:`Yazıcılar yüklenemedi.`},noPrinters:`Gösterilecek yazıcı yok`,noSignal:`Sinyal yok`,live:`Canlı`,snap:`Foto`,off:`Kapalı`,summary:`{{live}} canlı, {{snap}} fotoğraf, toplam {{total}}`,layer:`Katman {{cur}}/{{total}}`,timeLeft:`{{time}} kaldı`,statusMode:{off:`Kapalı`,compact:`Sade`,full:`Tam`},settings:{title:`Kamera duvarı ayarları`,maxLive:`Maks. canlı yayın`,maxLiveHint:`Aynı anda kaç döşemenin canlı yayın yaptığı. Diğerleri foto olarak yenilenir.`,snapshotInterval:`Foto aralığı (saniye)`,snapshotIntervalHint:`Canlı olmayan döşemelerin ne sıklıkla yeni bir foto aldığı.`,statusOverlay:`Durum kaplaması`,statusOverlayHint:`Sade: yalnızca durum rozeti. Tam: + ilerleme, katman, kalan süre.`}},hideOffline:`Çevrimdışı olanları gizle`,nextAvailable:`Sıradaki müsait`,powerOn:`Aç`,offlinePrintersWithPlugs:`Akıllı prizli çevrimdışı yazıcılar`,noPrintersConfigured:`Henüz yapılandırılmış yazıcı yok`,search:`Yazıcı ara...`,noSearchResults:`Aramanıza veya filtrelerinize uyan yazıcı yok`,filter:{allStatuses:`Tüm durumlar`,allLocations:`Tüm konumlar`},toolbar:{filters:`Filtreler`,view:`Görünüm`,actions:`İşlemler`},readyToPrint:`Baskıya hazır`,external:`Harici`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Baskı arşivlerini sil`,noLabel:`Etiket yok`,printPreview:`Baskı önizleme`,width:`Genişlik`,height:`Yükseklik`,noObjectsFound:`Nesne bulunamadı`,objectsLoadedOnPrintStart:`Nesneler baskı başladığında yüklenir`,willBeSkipped:`Atlanacak`,name:`Ad`,serialCannotBeChanged:`Seri numarası değiştirilemez`,locationHelp:`Yazıcıları gruplamak ve kuyruk işlerini filtrelemek için kullanılır`,wifiSignal:{veryWeak:`Çok zayıf`,weak:`Zayıf`,fair:`Orta`,good:`İyi`,excellent:`Mükemmel`},maintenanceUpToDate:`Tüm bakım güncel - Görüntülemek için tıklayın`,maintenance:{title:`Bakımda`,subtitle:`Bu yazıcı duraklatıldı — bağlı değil, kuyruğa uygun değil, bildirim göndermiyor.`,pillLabel:`Bakım`,exitButton:`Bakımdan çık`,menuEnter:`Bakım moduna gir`,menuExit:`Bakım modundan çık`,toastEntered:`{{name}} artık bakım modunda`,toastExited:`{{name}} tekrar çevrimiçi`,confirmMidPrintTitle:`Yazdırma sırasında bakım moduna geçilsin mi?`,confirmMidPrintMessage:`{{name}} şu anda yazdırıyor. Bakım moduna geçmek MQTT bağlantısını kesecek ve bu iş için ilerleme takibi ile tamamlanma bildirimlerini durduracak. Devam edilsin mi?`,editFieldLabel:`Bakım modu`,editFieldHelp:`Etkinleştirildiğinde, bu yazıcı MQTT, kuyruk gönderimi ve bildirimlerden duraklatılır — tamir, paralel Bambuddy kurulumları veya geçici askıya alma için kullanışlıdır.`},chamberLightOn:`Hazne ışığını aç`,chamberLightOff:`Hazne ışığını kapat`,files:`Dosyalar`,browseFiles:`Yazıcı dosyalarına göz at`,autoOffAfterPrint:`Baskı sonrası otomatik kapat`,autoOffExecuted:`Otomatik kapama uygulandı - sıfırlamak için yazıcıyı açın`,hmsErrors:`HMS Hataları`,viewHmsErrors:`{{count}} HMS hatasını gör`,resume:`Devam Et`,pause:`Duraklat`,stop:`Durdur`,camera:`Kamera`,skipObject:`Nesneyi Atla`,reconnect:`Yeniden Bağlan`,forceRefresh:`Zorla Yenile`,forceRefreshSuccess:`Yenileme istendi`,mqttDebug:`MQTT Hata Ayıklama`,printerInformation:`Yazıcı Bilgisi`,copyToClipboard:`Kopyala`,copied:`Kopyalandı!`,state:`Durum`,wifiSignalLabel:`WiFi Sinyali`,developerMode:`Geliştirici Modu`,enabled:`Etkin`,disabled:`Devre dışı`,addedOn:`Eklendi`,sdCard:`SD Kart`,inserted:`Takılı`,notInserted:`Takılı değil`,totalPrintHours:`Baskı Saatleri`,activeNozzle:`Aktif: {{nozzle}} nozul`,amsSwitchInletTooltip:`Filament Hattı Değiştirici IN-{{inlet}} ({{side}}) — her iki nozulu besler`,nozzleRack:`Nozul Rafı`,nozzleDocked:`Yuvalanmış`,nozzleMounted:`Takılı`,nozzleActive:`Aktif`,nozzleIdle:`Boşta`,nozzleDiameter:`Çap`,nozzleType:`Tür`,nozzleStatus:`Durum`,nozzleFilament:`Filament`,nozzleWear:`Aşınma`,nozzleMaxTemp:`Maks. Sıcaklık`,nozzleSerial:`Seri`,nozzleHardenedSteel:`Sertleştirilmiş Çelik`,nozzleStainlessSteel:`Paslanmaz Çelik`,nozzleTungstenCarbide:`Tungsten Karbür`,nozzleFlow:`Akış`,nozzleHighFlow:`Yüksek Akış`,nozzleStandardFlow:`Standart`,firmwareUpdate:`Firmware Güncellemesi`,firmwareInstructions:`Yazıcının dokunmatik ekranında şuraya gidin:`,firmwareNav:`Şuraya gidin`,settings:`Ayarlar`,firmware:`Firmware`,discoverPrinters:`Yazıcıları Keşfet`,searching:`Aranıyor...`,manualEntry:`Manuel Giriş`,addFromCloud:`Bulut'tan Ekle`,toast:{printerDeleted:`Yazıcı silindi`,missingSpoolAssignment:`{{printer}} üzerinde baskı başladı. Şunlar için eksik makara ataması: {{slots}}`,killSwitchTriggered:`Faturalandırma durdurma anahtarı {{printer}} üzerindeki yetkisiz baskıyı durdurdu: {{filename}}`,billingChargeFailed:`{{printer}} üzerindeki {{filename}} için faturalandırma başarısız oldu. Bütçe rezervasyonu korundu; sunucu günlüklerini kontrol edin.`,assignmentVerified:`{{slot}} yuvasına filament yüklendi ({{printer}})`,assignmentVerifiedNoKprofile:`{{printer}} üzerindeki {{slot}} yuvası yüklendi, ancak akış kalibrasyonu profili (K profili) uygulanmadı`,assignmentNotConfirmed:`{{printer}} üzerindeki {{slot}} yuvası ataması doğrulanamadı — AMS yuvasını kontrol edin`,printerAdded:`Yazıcı eklendi`,printerUpdated:`Yazıcı güncellendi`,failedToDelete:`Yazıcı silinemedi`,failedToAdd:`Yazıcı eklenemedi`,connectionFailedNotAdded:`Yazıcıya bağlanılamadı. IP, seri numarası ve erişim kodunu doğrulayın ve yalnızca LAN modunun açık olduğunu onaylayın. Yazıcı eklenmedi.`,failedToUpdate:`Yazıcı güncellenemedi`,commandSent:`Komut gönderildi`,failedToSendCommand:`Komut gönderilemedi`,turnedOn:`{{name}} açıldı`,failedToPowerOn:`{{name}} açılamadı`,scriptTriggered:`Betik tetiklendi`,printStopped:`Baskı durduruldu`,printPaused:`Baskı duraklatıldı`,printResumed:`Baskıya devam edildi`,referenceDeleted:`Referans silindi`,detectionAreaSaved:`Algılama alanı kaydedildi`,failedToRunScript:`Betik çalıştırılamadı`,failedToStopPrint:`Baskı durdurulamadı`,failedToPausePrint:`Baskı duraklatılamadı`,failedToResumePrint:`Baskıya devam edilemedi`,failedToControlChamberLight:`Hazne ışığı kontrol edilemedi`,failedToSetSpeed:`Baskı hızı ayarlanamadı`,failedToUpdateSetting:`Ayar güncellenemedi`,failedToSkipObjects:`Nesneler atlanamadı`,failedToRereadRfid:`RFID yeniden okunamadı`,failedToCheckPlate:`Plaka kontrol edilemedi`,failedToUpdateLabel:`Etiket güncellenemedi`,failedToDeleteReference:`Referans silinemedi`,failedToSaveDetectionArea:`Algılama alanı kaydedilemedi`,plateCheckEnabled:`Plaka kontrolü etkinleştirildi`,plateCheckDisabled:`Plaka kontrolü devre dışı bırakıldı`,calibrationSaved:`Kalibrasyon kaydedildi!`,calibrationFailed:`Kalibrasyon başarısız`,rfidRereadInitiated:`RFID yeniden okuma başlatıldı`,loadInitiated:`Filament yükleniyor…`,unloadInitiated:`Filament çıkarılıyor…`,failedToLoad:`Filament yüklenemedi`,failedToUnload:`Filament çıkarılamadı`},connection:{connected:`Bağlı`,offline:`Çevrimdışı`},plateStatus:{markCleared:`Plakayı temizlendi olarak işaretle`,cleared:`Plaka Temiz`,notCleared:`Plaka Temiz Değil`,inUse:`Plaka Kullanımda`},queue:{inQueue:`Kuyrukta {{count}} baskı`,inQueue_plural:`Kuyrukta {{count}} baskı`},controls:`Kontroller`,rfid:{reread:`RFID'yi yeniden oku`},ams:{load:`Yükle`,unload:`Çıkar`,feedTitle:`{{slot}} hangi nozüle yüklensin?`,feedPrompt:`Filament Track Switch bu yuvayı her iki hotend'e de yönlendirebilir. Hangisinin besleneceğini seçin.`,feedLeft:`Sol nozül`,feedRight:`Sağ nozül`,feedAlreadyLoaded:`Zaten yüklü`,switchNotReady:`Filament Track Switch henüz kurulmadı. Yazıcıda her AMS'yi bir girişe atayın ve tekrar deneyin.`},bedJog:{limitWarning:`Manuel hareketlerde hareket sınırları uygulanmaz — bir Bambu donanım yazılımı hatası, uzaktan komutlarda yazılım limit anahtarlarını yok sayar. Çarpışmayı önlemek için dikkatlice hareket ettirin.`,title:`Jog kontrolleri`,bed:`Tabla`,step:`Adım (mm)`,up:`Plakayı yukarı hareket ettir`,down:`Plakayı aşağı hareket ettir`,toolheadUp:`Baskı kafasını yukarı hareket ettir`,toolheadDown:`Baskı kafasını aşağı hareket ettir`,disabledWhilePrinting:`Baskı sırasında devre dışı`,notHomedTitle:`Yazıcı sıfırlanmamış`,notHomedMessage:`Yazıcı son baskıdan bu yana sıfırlanmadı. Güvenli konumlandırma için önce otomatik sıfırlamayı çalıştırın (kafayı park eder, ardından X, Y ve Z sıfırlanır) veya yine de hareket ettirin — yazılım son durakları atlanır.`,homeZ:`Otomatik Sıfırla`,moveAnyway:`Yine de hareket ettir`,homingStarted:`Yazıcı otomatik sıfırlanıyor…`},permission:{noAdd:`Yazıcı eklemek için izniniz yok`,noEdit:`Yazıcıları düzenlemek için izniniz yok`,noDelete:`Yazıcıları silmek için izniniz yok`,noControl:`Yazıcıları kontrol etmek için izniniz yok`,noFiles:`Yazıcı dosyalarına erişim izniniz yok`,noAmsRfid:`AMS RFID'yi yeniden okumak için izniniz yok`,noSmartPlugControl:`Akıllı prizleri kontrol etme izniniz yok`,noCamera:`Kameraları görüntüleme izniniz yok`},modal:{addTitle:`Yazıcı Ekle`,editTitle:`Yazıcıyı Düzenle`,myPrinter:`Yazıcım`,selectModel:`Model seç...`,locationGroup:`Konum / Grup (isteğe bağlı)`,locationPlaceholder:`örn., Atölye, Ofis, Bodrum`,autoArchiveLabel:`Tamamlanan baskıları otomatik arşivle`,fromPrinterSettings:`Yazıcı ayarlarından`,modelOptional:`Model (isteğe bağlı)`,saveChanges:`Değişiklikleri Kaydet`},skipObjects:{tooltip:`Nesneleri atla`,onlyWhilePrinting:`Nesneleri atla (yalnızca baskı sırasında)`,requiresMultiple:`Nesneleri atla (2+ nesne gerektirir)`,title:`Nesneleri Atla`,matchIdsInfo:`ID'leri yazıcı ekranınızla eşleştirin`,printerShowsIds:`Yazıcı ekranı baskı plakasındaki nesne ID'lerini gösterir`,skipSelected:`Seçilenleri Atla`,skipping:`Atlanıyor...`,noObjectsSelected:`Hiçbir nesne seçilmedi`,selectObjectsToSkip:`Mevcut baskıdan atlamak istediğiniz nesneleri seçin`,skipped:`atlandı`,objectsSkipped:`Nesneler atlandı`,activeCount:`{{count}} aktif`,waitForLayer:`Nesneleri atlamak için 2+ katmanı bekleyin (şu an katman {{layer}})`,skip:`Atla`,confirmTitle:`Nesne Atlansın mı?`,confirmMessage:`"{{name}}" atlamak istediğinizden emin misiniz? Bu geri alınamaz.`,confirmAllMessage:`Kalan tüm nesneler seçildi. Bu, yazdırma işini durduracaktır. Devam edilsin mi?`,confirmMultipleMessage:`Seçilen {{count}} nesne atlansın mı? Bu geri alınamaz.`},confirm:{deleteTitle:`Yazıcıyı Sil`,deleteMessage:`"{{name}}" silmek istediğinizden emin misiniz? Bu, tüm bağlantı ayarlarını kaldıracak.`,deleteArchivesNote:`Bu yazıcı için tüm baskı geçmişi kalıcı olarak silinecek.`,keepArchivesNote:`Baskı geçmişi saklanacak ancak artık bu yazıcıyla ilişkilendirilmeyecek.`,stopTitle:`Baskıyı Durdur`,stopMessage:`"{{name}}" üzerindeki mevcut baskıyı durdurmak istediğinizden emin misiniz? Bu, baskı işini iptal edecek.`,stopButton:`Baskıyı Durdur`,pauseTitle:`Baskıyı Duraklat`,pauseMessage:`"{{name}}" üzerindeki mevcut baskıyı duraklatmak istediğinizden emin misiniz?`,pauseButton:`Baskıyı Duraklat`,resumeTitle:`Baskıya Devam Et`,resumeMessage:`"{{name}}" üzerindeki baskıya devam etmek istediğinizden emin misiniz?`,resumeButton:`Baskıya Devam Et`,powerOnTitle:`Yazıcıyı Aç`,powerOnMessage:`"{{name}}" için gücü AÇMAK istediğinizden emin misiniz?`,powerOnButton:`Aç`,powerOffTitle:`Yazıcıyı Kapat`,powerOffMessage:`"{{name}}" için gücü KAPATMAK istediğinizden emin misiniz?`,powerOffWarning:`UYARI: "{{name}}" şu anda baskı yapıyor! Gücü KAPATMAK istediğinizden emin misiniz? Bu, baskıyı kesintiye uğratacak ve yazıcıya zarar verebilir.`,powerOffButton:`Kapat`,haToggleTitle:`"{{name}}" Aç/Kapat`,haToggleMessage:`Home Assistant varlığı {{entity}} açılıp kapatılsın mı? Şu anda açıksa güç kesilebilir.`,haToggleWarning:`UYARI: "{{name}}" şu anda baskı yapıyor! {{entity}} açılıp kapatılması gücü kesip baskıyı kesintiye uğratabilir. Devam edilsin mi?`,haToggleButton:`Aç/Kapat`},bulk:{select:`Seç`,selectAll:`Tümünü Seç`,selectByLocation:`Konuma Göre Seç`,selected:`{{count}} seçildi`,actions:{stop:`Durdur`,pause:`Duraklat`,resume:`Devam Et`,clearPlate:`Tablayı Temizle`,clearHMS:`Bildirimleri Temizle`},confirm:{stopTitle:`{{count}} Baskıyı Durdur`,stopMessage:`Bu, {{count}} yazıcı üzerindeki aktif baskıları iptal edecek. Bu işlem geri alınamaz.`,stopButton:`Hepsini Durdur`,pauseTitle:`{{count}} Baskıyı Duraklat`,pauseMessage:`Bu, {{count}} yazıcı üzerindeki aktif baskıları duraklatacak.`,pauseButton:`Hepsini Duraklat`,clearPlateTitle:`{{count}} Baskı Tablasını Temizle`,clearPlateMessage:`Bu, {{count}} yazıcının baskı tablasını temizleyecek ve kuyruktaki işleri tetikleyebilir.`,clearPlateButton:`Hepsini Temizle`},success:`{{count}} yazıcı üzerinde {{action}} tamamlandı`,partial:`{{succeeded}} başarılı, {{failed}} başarısız`,noneApplicable:`Seçilen yazıcılar bu işlem için doğru durumda değil`,selectByState:`Duruma Göre Seç`},discovery:{title:`Yazıcıları Keşfet`,searching:`Aranıyor...`,scanning:`Taranıyor...`,scanProgress:`Taranıyor... {{scanned}}/{{total}}`,foundPrinters:`{{count}} yazıcı bulundu`,noPrintersFound:`Yazıcı bulunamadı`,noPrintersFoundSubnet:`Belirtilen alt ağda yazıcı bulunamadı.`,noPrintersFoundNetwork:`Ağda yazıcı bulunamadı.`,allConfigured:`Keşfedilen tüm yazıcılar zaten yapılandırılmış.`,alreadyAdded:`Zaten eklendi`,select:`Seç`,manualEntry:`Manuel Giriş`,addFromCloud:`Bulut'tan Ekle`,subnetToScan:`Taranacak alt ağ`,dockerNote:`Docker algılandı. Yazıcınızın alt ağını CIDR gösteriminde girin. docker-compose.yml'de network_mode: host gerektirir.`,scanSubnet:`Yazıcılar için Alt Ağı Tara`,discoverNetwork:`Ağda Yazıcıları Keşfet`,scanningSubnet:`Bambu yazıcıları için alt ağ taranıyor...`,scanningNetwork:`Ağ taranıyor...`,serialRequired:`Seri numarası gerekli`,unknown:`Bilinmiyor`,failedToStart:`Keşif başlatılamadı`,customSubnetOption:`Özel alt ağ...`,customSubnetLabel:`Özel alt ağ (CIDR)`,customSubnetNote:`Yazıcınız bu sunucudan farklı bir ağda ise özel bir alt ağ kullanın. FTP (990) ve MQTT (8883) bağlantı noktaları yönlendirme sınırı boyunca erişilebilir olmalıdır.`},drying:{start:`Kurutmayı Başlat`,stop:`Kurutmayı Durdur`,temperature:`Sıcaklık`,duration:`Süre`,hours:`saat`,timeRemaining:`{{time}} kaldı`,active:`Kurutuluyor`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`Kurutma desteklenmiyor`,powerRequired:`Kurutmayı etkinleştirmek için AMS güç adaptörünü bağlayın`,cannotDryNow:`AMS şu anda kurutmayı başlatamıyor`,startingDrying:`Kurutma başlatılıyor...`,toastCommandSent:`Kurutma komutu gönderildi`,toastStopped:`Kurutma durduruldu`,toastNotStarted:`Yazıcı komutu kabul etti ancak AMS kurutmayı başlatmadı. AMS güç adaptörünün bağlı olduğundan ve yazıcının boşta olduğundan emin olun.`,screenOnly:`Bu yazıcıda AMS kurutma yalnızca yazıcının kendi ekranından kontrol edilebilir (Bambu kısıtlaması)`,stoppingDrying:`Kurutma durduruluyor...`,rotateTray:`Kurutma sırasında makarayı döndür`,rotateUnavailableReason:`Kullanılamaz — bu AMS'nin bir yuvası kafaya doğru yüklenmiş durumda. Makara besleme borusu tarafından kilitlendiği için döndürülemez. Önce filamenti geri çekin.`,startMode:`Başlangıç zamanı`,modeNow:`Şimdi`,modeDelay:`Gecikme sonrası`,modeAtTime:`Belirli saatte`,schedule:`Zamanla`,scheduledFor:`Kurutma {{time}} için zamanlandı`,scheduledAsap:`Kurutma zamanlandı (yazıcı bekleniyor)`,cancelScheduled:`Zamanlanmış kurutmayı iptal et`,scheduleFailed:`Kurutma zamanlanamadı`,retractFilament:`Kurutmayı başlatmak için AMS çıkışındaki filamenti geri çekin`,waitingAmsNotFound:`AMS algılanması bekleniyor`,waitingOffline:`Yazıcının çevrimiçi olması bekleniyor`,waitingPrinterBusy:`Yazıcının boşalması bekleniyor`,waitingAlreadyDrying:`Mevcut kurutma döngüsünün bitmesi bekleniyor`,waitingInterrupted:`Kesildi, yazıcı boşaldığında yeniden başlayacak`,scheduleFailedReason:`Zamanlanmış kurutma başarısız oldu: {{reason}}`,scheduleFailedUnknown:`Bilinmeyen hata`,dismissFailed:`Kapat`},amsBackup:{titleOn:`AMS Filament Backup AÇIK. Devre dışı bırakmak için tıklayın.`,titleOff:`AMS Filament Backup KAPALI. Etkinleştirmek için tıklayın.`,titleUnknown:`Bu yazıcıda AMS Filament Backup durumu kullanılamıyor.`,toastEnabled:`AMS Filament Backup etkinleştirildi`,toastDisabled:`AMS Filament Backup devre dışı bırakıldı`,modalTitle:`AMS Filament Backup`,modalHelp:`Aktif slot tükendiğinde, yazıcı aynı ön ayar ve renkteki slotları bu sırayla dolaşır.`,modalNoSlots:`Yüklenmiş filament yok.`,modalNoPairs:`Yedek çifti yok — hiçbir slot çifti aynı ön ayar ve rengi paylaşmıyor.`,extruderRightShort:`S`,extruderLeftShort:`L`,stateOn:`Etkin`,stateOff:`Devre dışı`,stateUnknown:`Bu yazıcıda desteklenmiyor`},activeJobSlot:{title:`Bu slot, aktif baskıdaki {{n}} numaralı filament`,ariaLabel:`Aktif baskı slotu {{n}}`},expectedSlot:{title:`Yazıcı bu slotta filament bekliyor`,ariaLabel:`Beklenen filament slotu {{n}}`,label:`{{ams}} · Slot {{slot}}`,external:`Harici makara`},filaments:`Filamentler`,externalSpool:{hide:`Harici makarayı gizle`,show:`Harici makarayı göster`},openCameraOverlay:`Kamera bindirmesini aç`,openCameraWindow:`Kamerayı yeni pencerede aç`,firmwareUpdateAvailable:`Firmware güncellemesi mevcut: {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — Güncel`,firmwareUpdateButton:`Güncelle`,plateDetection:{noPermission:`Yazıcıları güncellemek için izniniz yok`,enabledClick:`Plaka kontrolü etkin - Devre dışı bırakmak için tıklayın`,disabledClick:`Plaka kontrolü devre dışı - Etkinleştirmek için tıklayın`,manageCalibration:`Plaka algılama kalibrasyonunu yönet`,calibrationRequired:`Kalibrasyon Gerekli`,calibrationInstructions:`Lütfen baskı plakasının <strong>tamamen boş</strong> olduğundan emin olun, ardından Kalibre Et'e tıklayın.`,calibrationDescription:`Kalibrasyon, boş plakanın referans görüntüsünü yakalar. Gelecekteki kontroller, nesneleri algılamak için bu referansa karşı karşılaştırılır.`,calibrationTip:`<strong>İpucu:</strong> Farklı plakalar için 5 kalibrasyona kadar saklayabilirsiniz. Sistem, kontrol sırasında en iyi eşleşmeyi otomatik olarak kullanır.`,plateEmpty:`Plaka boş görünüyor`,objectsDetected:`Plakada nesneler algılandı`,confidence:`Güven`,difference:`Fark`,analysisPreview:`Analiz önizlemesi:`,analysisLegend:`Yeşil kutu = algılama alanı, Kırmızı kaplama = kalibrasyondan farklar`,savedReferences:`Kaydedilen Referanslar ({{count}}/{{max}})`,deleteReference:`Referansı sil`,labelPlaceholder:`Etiket...`,clickToEdit:`{{label}} - Düzenlemek için tıklayın`,clickToAddLabel:`Etiket eklemek için tıklayın`},speed:{title:`Baskı Hızı`,silent:`Sessiz (%50)`,standard:`Standart (%100)`,sport:`Spor (%124)`,ludicrous:`Çılgın (%166)`},airduct:{title:`Hava Kanalı Modu`,cooling:`Soğutma`,heating:`Isıtma`},noSdCard:`SD Yok`,door:{open:`Açık`,closed:`Kapalı`},fans:{partCooling:`Parça Soğutma Fanı`,auxiliary:`Yardımcı Fan`,leftAuxiliary:`Sol Yardımcı Fan`,exhaust:`Egzoz`,chamber:`Hazne Fanı`},clickToViewHmsErrors:`HMS hatalarını görüntülemek için tıklayın`,aiDetection:{safe:`Güvenli`,warning:`Uyarı`,failure:`Başarısızlık`,idle:`Boşta`,error:`Kontrol etmiyor`,unknown:`Başlatılıyor`,tooltipError:`AI Başarısızlık Algılama bu baskıyı kontrol etmiyor: {{reason}} - ayrıntılar için tıklayın`,tooltipUnknown:`AI Başarısızlık Algılama: ilk sonuç bekleniyor - ayrıntılar için tıklayın`,errorHint:`Bu baskı kontrol edilmiyor. Aşağıdaki sorun giderildiğinde algılama otomatik olarak devam eder.`,tooltip:`AI Başarısızlık Algılama: {{status}} (puan {{score}}) - ayrıntılar için tıklayın`,tooltipIdle:`AI Başarısızlık Algılama etkin - izleme bir sonraki baskıyla başlar - ayrıntılar için tıklayın`,modalTitle:`AI Başarısızlık Algılama - {{name}}`,currentStatus:`Durum`,score:`Puan`,framesAnalyzed:`Analiz edilen kareler`,idleHint:`Şu anda izlenen bir baskı yok. İzleme bir sonraki baskıyla otomatik olarak başlar.`,lastError:`Son hata`,openSettings:`Ayarları aç`},estimatedCompletion:`Tahmini tamamlanma süresi`,plateNumber:`Plaka {{number}}`,slotOptions:`Yuva seçenekleri`,amsPopup:{friendlyName:`AMS Adı`,friendlyNamePlaceholder:`örn. AMS Kolay Adı`,serialNumber:`Seri Numarası`,firmwareVersion:`Firmware`,save:`Kaydet`,clear:`Temizle`,noEditPermission:`AMS birimlerini yeniden adlandırma izniniz yok`},firmwareModal:{title:`Firmware Güncellemesi`,titleUpToDate:`Firmware Bilgisi`,currentVersion:`Mevcut:`,latestVersion:`En son:`,releaseNotes:`Sürüm Notları`,checkingPrereqs:`Önkoşullar kontrol ediliyor...`,sdCardReady:`SD kart hazır. Firmware yüklemek için aşağıya tıklayın.`,uploadedSuccess:`Firmware SD karta yüklendi!`,applyInstructions:`Güncellemeyi yazıcınıza uygulamak için:`,step1:`Yazıcının dokunmatik ekranında <strong>Ayarlar</strong>'a gidin`,step2:`<strong>Firmware</strong>'e gidin`,step3:`<strong>SD karttan güncelle</strong>'yi seçin`,step4:`Güncelleme 10-20 dakika sürer`,done:`Tamam`,starting:`Başlatılıyor...`,uploadFirmware:`Firmware Yükle`,uploadFailed:`Yükleme başlatılamadı: {{error}}`,uploadedToast:`Firmware yüklendi! Güncellemeyi yazıcı ekranından tetikleyin.`,availableVersions:`Kullanılabilir sürümler`,usable:`Kullanılabilir`,unavailable:`Kullanılamaz`,installed:`Yüklü`,newerBadge:`daha yeni`,olderBadge:`daha eski`,currentBadge:`mevcut`},accessCodePlaceholder:`Mevcut olanı korumak için boş bırakın`,roi:{title:`Algılama Alanı (ROI)`,xStart:`X Başlangıç`,yStart:`Y Başlangıç`,width:`Genişlik`,height:`Yükseklik`,instruction:`Baskı plakasına odaklanmak için algılama alanını ayarlayın. Önizlemedeki yeşil kutu mevcut alanı gösterir.`},developerModeWarning:`Geliştirici LAN modu şunlarda etkin değil: {{names}}. Bazı özellikler çalışmayabilir.`,howToEnable:`Nasıl etkinleştirilir`,incompatibleFile:`Bu dosya {{slicedFor}} için dilimlendi, ancak bu yazıcı bir {{printerModel}}`,dropNotPrintable:`Yalnızca .gcode ve .gcode.3mf dosyaları yazdırılabilir`,dropToPrint:`Yazdırmak için bırakın`,dropToQueue:`Kuyruğa eklemek için bırakın`},archives:{media:{title:`Baskı videoları`,download:`Baskı videolarını indir`,searching:`Yazıcıda video aranıyor…`,searchFailed:`Yazıcıdaki videolar kontrol edilemedi.`,none:`Bu baskı için hızlandırılmış çekim veya IP kamera parçası bulunamadı.`,attachedTimelapse:`Ekli hızlandırılmış çekim`,printerFiles:`Yazıcıda kalan dosyalar`,downloadSelected:`Seçilenleri indir`,printerMissing:`Yazıcı artık yapılandırılmış değil`,timelapseUnavailable:`Hızlandırılmış çekim dizini okunamadı`,ipcamUnavailable:`IP kamera dizini okunamadı`},title:`Baskı Arşivleri`,no3mfBanner:{title:`Bazı son baskılar küçük resimlerle birlikte arşivlenemedi`,body:`Dilimleyici yazıcının SD kartına .gcode.3mf dosyasını bırakmadı, bu nedenle Bambuddy küçük resmi veya dilimleyici meta verilerini alamadı. Bu genellikle dilimleyicide (Bambu Studio / OrcaSlicer'in Cihaz sekmesi) "Gönderilen dosyaları harici depolamada sakla" seçeneğinin kapalı olmasından kaynaklanır.`,docsLink:`Kurulum adımı 4'ü görüntüle`,docsLinkInternalStorage:`Bu neden oluyor`,titleInternalStorage:`Bazı son baskılar yazıcının dahili depolamasında kaldı`,bodyInternalStorage:`Bambu Studio dilimlenmiş dosyayı karta değil yazıcının dahili depolamasına yazdı, bu yüzden Bambuddy'nin FTP üzerinden okuyacağı bir şey yoktu. H2 serisi, P2S ve X2D'de «Yazdır» düğmesi bunu her zaman yapar; seçim yalnızca «Gönder» ile mümkündür ve orada da varsayılan «Önbellek»tir. Bu baskılar adları ve süreleriyle yine arşivlenir, yalnızca küçük resim ve dilimleyici meta verileri olmadan. Eksiksiz arşivler için baskıyı Bambuddy üzerinden başlatın ya da OrcaSlicer ile dilimleyin; Bambu Studio kullanacaksanız «Gönder» ile «Harici» seçip baskıyı sonrasında başlatın. Hepsi yazıcıda kart ya da bellek gerektirir.`,titleNoExternalStorage:`Bazı son baskılar arşivlenemedi — yazıcıda depolama yok`,bodyNoExternalStorage:`Yazıcı yuvasında kart veya bellek bildirmiyor, bu yüzden dilimlenmiş dosyanın ineceği bir yer ve Bambuddy'nin okuyacağı bir şey yoktu. Bir tane takın, sonraki baskı eksiksiz arşivlenecek.`,titleInternalHistory:`Bazı son baskılar yazıcıda zaten bulunan bir dosyadan başlatıldı`,bodyInternalHistory:`Bu baskılar yazıcının kendi kitaplığından çalıştı — ekranından yeniden baskı, Handy üzerinden başlatma ya da daha önce gönderilip sonra basılan bir dosya. Bambuddy baskı dosyalarını FTP üzerinden okur, FTP ise yalnızca kartı veya belleği sunar; yazıcı bu kitaplığı FTP'nin ulaşamadığı bir alanda tutar, dolayısıyla okunacak bir 3MF yoktu. Hiçbir dilimleyici ayarı bunu değiştirmez, çünkü bu baskılar için hiçbir şey gönderilmedi. Adları ve süreleriyle arşivlenmeye devam ederler ve "Arşivi Düzenle" ile kullanılan filamenti elle girebilirsiniz. Eksiksiz bir arşiv için baskıyı Bambuddy'den ya da dilimleyicinizden başlatın.`,titleFtpsCooloff:`Bazı son baskılar arşivlenemedi — yazıcı dosya bağlantısını reddetti`,bodyFtpsCooloff:`Bambuddy yazıcının dosya aktarım portunu (FTPS 990) açtı ve yazıcı TLS olmayan bir şeyle yanıt verdi, bu yüzden ondan hiçbir şey okunamadı. O baskılar adları ve süreleriyle yine arşivlenir, yalnızca küçük resim ve dilimleyici meta verileri olmadan. Bu bir dilimleyici ayarı değil ve sizin değiştirdiğiniz bir şey de değil — aynı modeller ve aynı ürün yazılımları başka kurulumlarda sorunsuz çalışıyor ve etkilenen bir yazıcı genellikle bir süre sonra kendiliğinden yeniden çalışıyor. Böyle bir hatadan sonra Bambuddy o yazıcıya yapılan aktarımları beş dakika duraklatır ve duraklama bitince dosyayı yeniden almaya gelir; kısa bir kesinti böylece kendiliğinden düzelir, hâlâ boş duran bir kart ise reddin yeniden denemeden daha uzun sürdüğü anlamına gelir. Buna neyin yol açtığı henüz bilinmiyor. Tekrarlıyorsa Sistem sayfasından hata ayıklama günlüğünü açın ve bildiriminize bir destek paketi ekleyin.`,titleFtpTransferFailed:`Bazı son baskılar arşivlenemedi — dosya aktarımı süreye sığmadı`,bodyFtpTransferFailed:`Dilimlenmiş dosya yazıcının kartındaydı ve yazıcı dosyayı gerçekten sunuyordu, ancak aktarım izin verilen sürede tamamlanmadı. Baskı başlarken yazıcı aynı anda kamerasıyla, durum mesajlarıyla ve iş yüklemesiyle de ilgilenir; büyük bir 3MF bunların arasından her zaman geçemez. Bu baskılar adı ve süreleriyle hâlâ arşivde, yalnızca küçük resim ve dilimleyici verileri eksik. Bu bir dilimleyici ayarı değil ve sizin değiştirdiğiniz bir şeyden kaynaklanmıyor. Bambuddy sonraki on dakika içinde dosyayı üç kez daha almaya gider, bu yüzden çoğu kendiliğinden tamamlanır; hâlâ boş duran bir kart, o denemelerin de süreye sığmadığı anlamına gelir. Sık sık oluyorsa Ayarlar > Ağ > FTP Yeniden Deneme altındaki Bağlantı Zaman Aşımı değerini artırın.`,dismissLabel:`Bu bildirimi kapat`},searchPlaceholder:`Arşivlerde ara...`,filterByPrinter:`Yazıcıya göre filtrele`,filterByStatus:`Duruma göre filtrele`,sortBy:`Sıralama`,sortNewest:`Önce en yeni`,sortOldest:`Önce en eski`,sortName:`Ad`,sortDuration:`Süre`,sortLargest:`Önce en büyük`,sortSmallest:`Önce en küçük`,sortSize:`Boyut`,noArchives:`Arşiv bulunamadı`,noArchivesSearch:`Aramanızla eşleşen arşiv yok`,originalPrintNotVisible:`Orijinal baskı görünmüyor - filtreleri temizlemeyi deneyin`,noArchivesYet:`Henüz arşiv yok`,prints:`baskı`,pagination:{showing:`Gösterilen`,to:`-`,of:`/`,show:`Göster`,page:`Sayfa`,all:`Tümü`},loadingArchives:`Arşivler yükleniyor...`,releaseToUpload:`Yüklemek için bırakın`,showAll:`Tümünü göster`,showFavoritesOnly:`Yalnızca favorileri göster`,gridView:`Izgara görünümü`,listView:`Liste görünümü`,calendarView:`Takvim görünümü`,logView:`Baskı Günlüğü`,manageTags:`Etiketleri Yönet`,showFailedPrints:`Başarısız baskıları göster`,hideFailedPrints:`Başarısız baskıları gizle`,hideDuplicates:`Tekrarları Gizle`,viewOriginalPrint:`Orijinal baskıyı görüntülemek için tıklayın (#{{id}})`,printTime:`Baskı Süresi`,filamentUsed:`Kullanılan Filament`,cost:`Maliyet`,preview:`Önizleme`,deleteArchive:`Arşivi Sil`,deleteConfirm:`Bu arşivi silmek istediğinizden emin misiniz?`,favorite:`Favori`,unfavorite:`Favorilerden kaldır`,viewDetails:`Detayları Görüntüle`,status:{completed:`Tamamlandı`,failed:`Başarısız`,stopped:`Durduruldu`},toast:{source3mfAttached:`Kaynak 3MF eklendi: {{filename}}`,failedUploadSource3mf:`Kaynak 3MF yüklenemedi`,source3mfRemoved:`Kaynak 3MF kaldırıldı`,failedRemoveSource3mf:`Kaynak 3MF kaldırılamadı`,f3dAttached:`F3D eklendi: {{filename}}`,failedUploadF3d:`F3D yüklenemedi`,f3dRemoved:`F3D kaldırıldı`,failedRemoveF3d:`F3D kaldırılamadı`,timelapseAttached:`Zaman atlamalı video eklendi: {{filename}}`,timelapseAlreadyAttached:`Zaman atlamalı video zaten eklendi`,noMatchingTimelapse:`Eşleşen zaman atlamalı video bulunamadı`,failedScanTimelapse:`Zaman atlamalı video taranamadı`,failedAttachTimelapse:`Zaman atlamalı video eklenemedi`,timelapseRemoved:`Zaman atlamalı video kaldırıldı`,failedRemoveTimelapse:`Zaman atlamalı video kaldırılamadı`,timelapseUploaded:`Zaman atlamalı video yüklendi: {{filename}}`,failedUploadTimelapse:`Zaman atlamalı video yüklenemedi`,archiveDeleted:`Arşiv silindi`,failedDeleteArchive:`Arşiv silinemedi`,addedToFavorites:`Favorilere eklendi`,removedFromFavorites:`Favorilerden kaldırıldı`,projectUpdated:`Proje güncellendi`,failedUpdateProject:`Proje güncellenemedi`,linkCopied:`Bağlantı panoya kopyalandı`,failedCopyLink:`Bağlantı kopyalanamadı`,photoDeleted:`Fotoğraf silindi`,failedDeletePhoto:`Fotoğraf silinemedi`,failedDeleteArchives:`Arşivler silinemedi`,failedUpdateFavorites:`Favoriler güncellenemedi`,exportDownloaded:`Dışa aktarma indirildi`,exportFailed:`Dışa aktarma başarısız`},menu:{print:`Yazdır`,openInBambuStudio:`Dilimleyicide Aç`,slice:`Dilimle`,externalLink:`Harici Bağlantı`,viewOnMakerWorld:`MakerWorld'de Görüntüle`,preview3d:`3B Önizleme`,viewTimelapse:`Zaman Atlamalı Videoyu Görüntüle`,scanForTimelapse:`Zaman Atlamalı Video Tara`,uploadTimelapse:`Zaman Atlamalı Video Yükle`,removeTimelapse:`Zaman Atlamalı Videoyu Kaldır`,downloadSource3mf:`Kaynak 3MF İndir`,uploadSource3mf:`Kaynak 3MF Yükle`,replaceSource3mf:`Kaynak 3MF Değiştir`,removeSource3mf:`Kaynak 3MF Kaldır`,uploadF3d:`F3D Yükle`,replaceF3d:`F3D Değiştir`,downloadF3d:`F3D İndir`,removeF3d:`F3D Kaldır`,download:`İndir`,copyDownloadLink:`İndirme Bağlantısını Kopyala`,qrCode:`QR Kod`,viewPhotos:`Fotoğrafları Görüntüle`,viewPhotosCount:`Fotoğrafları Görüntüle ({{count}})`,projectPage:`Proje Sayfası`,addToFavorites:`Favorilere Ekle`,removeFromFavorites:`Favorilerden Kaldır`,edit:`Düzenle`,printLog:`Baskı Günlüğü`,goToProject:`Projeye Git: {{name}}`,addToProject:`Projeye Ekle`,removeFromProject:`Projeden Kaldır`,loading:`Yükleniyor...`,noProjectsAvailable:`Kullanılabilir proje yok`,searchProjects:`Projelerde ara…`,select:`Seç`,deselect:`Seçimi Kaldır`,delete:`Sil`},permission:{noReprint:`Bu arşivi yeniden yazdırma izniniz yok`,noAddToQueue:`Kuyruğa ekleme izniniz yok`,noUpdateArchives:`Arşivleri güncelleme izniniz yok`,noUploadFiles:`Dosya yükleme izniniz yok`,noDownload:`Arşivleri indirme izniniz yok`,noCopyLink:`İndirme bağlantılarını kopyalama izniniz yok`,noDelete:`Bu arşivi silme izniniz yok`,noEdit:`Bu girişi düzenleme izniniz yok`,noCreate:`Arşiv oluşturma izniniz yok`},platePicker:{title:`Önizleme için plaka seçin`,hint:`Bu arşivde birden fazla plaka var. GCode görüntüleyicide açmak için birini seçin.`,plateLabel:`Plaka {{index}}`,objectCount:`{{count}} nesne`,objectCount_plural:`{{count}} nesne`,noGcode:`Bu arşivin önizleme için dilimlenmiş G-kodu yok. Önce dilimlemek için Bambu Studio'da açın.`},card:{previousPlate:`Önceki plaka`,nextPlate:`Sonraki plaka`,plateNumber:`Plaka {{index}}`,moreOptions:`Daha fazla seçenek için sağ tıklayın`,addToFavorites:`Favorilere ekle`,removeFromFavorites:`Favorilerden kaldır`,cancelled:`iptal edildi`,failed:`başarısız`,duplicate:`tekrar`,duplicateTitle:`Bu model daha önce yazdırıldı`,openSource3mf:`Kaynak 3MF'yi Bambu Studio'da aç (daha fazla seçenek için sağ tıklayın)`,downloadF3d:`Fusion 360 tasarım dosyasını indir`,viewTimelapse:`Zaman atlamalı videoyu görüntüle`,viewPhoto:`1 fotoğrafı görüntüle`,viewPhotos:`{{count}} fotoğrafı görüntüle`,openFolder:`Klasörü aç: {{name}}`,slicedFile:`Dilimlenmiş dosya - yazdırmaya hazır`,sourceFile:`Yalnızca kaynak dosya - AMS eşlemesi mevcut değil`,gcode:`GCODE`,source:`KAYNAK`,project:`Proje: {{name}}`,runsBadge:`{{count}} baskı`,runsBadgeTitle:`Toplam {{count}} baskı — {{successful}} başarılı, {{failed}} başarısız. Tam baskı günlüğünü görmek için tıklayın.`,estimated:`Tahmini: {{time}}`,actual:`Gerçek: {{time}}`,accuracy:`Doğruluk: %{{percent}}`,filament:`{{weight}}g`,layer:`{{count}} katman`,layers:`{{count}} katman`,object:`{{count}} nesne`,objects:`{{count}} nesne`,slicedFor:`{{model}} için dilimlendi`,uploadedBy:`Yükleyen`,noPermissionReprint:`Yeniden yazdırma izniniz yok`,noFileForReprint:`Kullanılabilir 3MF dosyası yok — baskı kaydedildiğinde dosya yazıcıdan indirilemedi`,slicerAmsMapping:`AMS eşlemesi kaydedildi ({{printer}})`,slicerAmsMappingTooltip:`Dilimleyicinin AMS yuva seçimi {{printer}} için kaydedildi. Yuva numaraları yalnızca o yazıcıda anlamlıdır; bu nedenle yeniden yazdırma bunları yalnızca yine {{printer}} hedeflendiğinde kullanır.`,noPermissionEdit:`Arşivleri düzenleme izniniz yok`,noPermissionDelete:`Arşivleri silme izniniz yok`,openInBambuStudio:`Dilimleyicide Aç`,openInBambuStudioToSlice:`Dilimlemek için Dilimleyicide Aç`,slice:`Dilimle`,externalLink:`Harici Bağlantı`,makerWorld:`MakerWorld: {{designer}}`,viewProject:`Projeyi görüntüle`,noExternalLink:`Harici bağlantı yok`,preview3d:`3B Önizleme`,download:`İndir`,edit:`Düzenle`,delete:`Sil`},runLog:{title:`Baskı Günlüğü`,modalTitle:`Baskı Günlüğü — {{name}}`,modalTitleFallback:`bu arşiv`,empty:`Bu arşiv için henüz baskı olayı kaydedilmedi.`,col:{date:`Tarih`,status:`Durum`,duration:`Süre`,filament:`Filament`,cost:`Maliyet`},status:{completed:`Tamamlandı`,failed:`Başarısız`,cancelled:`İptal edildi`,stopped:`Durduruldu`,skipped:`Atlandı`,printing:`Yazdırılıyor`}},modal:{deleteArchive:`Arşivi Sil`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz? Bu işlem geri alınamaz.`,deleteButton:`Sil`,deletePurgeStats:`Ayrıca bu baskıyı Hızlı İstatistiklerden de kaldır (filament, süre, maliyet, enerji)`,deleteQueueItemsWarning:`Bu arşive bağlı {{count}} kuyruk öğesi de kaldırılacak.`,deleteBlockedByPrinting:`Silinemiyor — {{count}} kuyruk öğesi şu anda yazdırılıyor. Önce yazdırmayı durdurun, ardından tekrar deneyin.`,removeSource3mf:`Kaynak 3MF Kaldır`,removeSource3mfConfirm:`"{{name}}" dosyasından kaynak 3MF dosyasını kaldırmak istediğinizden emin misiniz? Bu, orijinal dilimleyici proje dosyasını silecek.`,removeButton:`Kaldır`,removeF3d:`F3D Kaldır`,removeF3dConfirm:`"{{name}}" dosyasından Fusion 360 tasarım dosyasını kaldırmak istediğinizden emin misiniz?`,removeTimelapse:`Zaman Atlamalı Videoyu Kaldır`,removeTimelapseConfirm:`"{{name}}" dosyasından zaman atlamalı videoyu kaldırmak istediğinizden emin misiniz?`,timelapse:`{{name}} - Zaman Atlamalı Video`,selectTimelapse:`Zaman Atlamalı Video Seç`,selectTimelapseDesc:`Otomatik eşleşme bulunamadı. Bu baskı için zaman atlamalı videoyu seçin:`,deleteArchives:`Arşivleri Sil`,deleteArchivesConfirm:`{{count}} arşivi silmek istediğinizden emin misiniz? Bu işlem geri alınamaz.`,deleteCount:`{{count}} Sil`},page:{title:`Arşivler`,printsCount:`{{total}} baskıdan {{filtered}} tanesi`,dropFilesHere:`.3mf dosyalarını buraya bırakın`,releaseToUpload:`Yüklemek için bırakın`,only3mfSupported:`Yalnızca .3mf dosyaları desteklenir`,close:`Kapat`,selected:`{{count}} seçildi`,selectAll:`Tümünü Seç`,tags:`Etiketler`,project:`Proje`,favorite:`Favori`,delete:`Sil`,toggledFavorites:`{{count}} arşiv için favoriler değiştirildi`,failedUpdateFavorites:`Favoriler güncellenemedi`,archivesDeleted:`{{count}} arşiv silindi`,failedDeleteArchives:`Arşivler silinemedi`,photoDeleted:`Fotoğraf silindi`,failedDeletePhoto:`Fotoğraf silinemedi`},list:{name:`Ad`,printer:`Yazıcı`,date:`Tarih`,size:`Boyut`,actions:`İşlemler`,hasTimelapse:`Zaman atlamalı videosu var`},log:{date:`Tarih`,printName:`Baskı Adı`,printer:`Yazıcı`,user:`Kullanıcı`,status:`Durum`,duration:`Süre`,filament:`Filament`,filamentUsed:`Kullanılan filament`,cost:`Maliyet`,energy:`Enerji`,energyCost:`Enerji maliyeti`,completedAt:`Bitti`,columns:`Sütunlar`,sortBy:`{{column}} ölçütüne göre sırala`,allPrinters:`Tüm Yazıcılar`,allUsers:`Tüm Kullanıcılar`,allStatuses:`Tüm Durumlar`,cancelled:`İptal edildi`,skipped:`Atlandı`,dateFrom:`Başlangıç`,dateTo:`Bitiş`,noEntries:`Baskı günlüğü kaydı bulunamadı`,showing:`{{total}} kayıttan {{count}} tanesi gösteriliyor`,rowsPerPage:`Satır`,page:`Sayfa`,prev:`Önceki`,next:`Sonraki`,clearLog:`Günlüğü Temizle`,clearLogTitle:`Baskı Günlüğünü Temizle`,clearLogConfirm:`Tüm baskı günlüğü kayıtları kalıcı olarak silinecek. Arşivler ve kuyruk öğeleri etkilenmeyecek. Bu işlem geri alınamaz. Emin misiniz?`,clearLogButton:`Hepsini Temizle`,cleared:`{{count}} günlük kaydı temizlendi`,clearFailed:`Baskı günlüğü temizlenemedi`,deleteEntryTitle:`Baskı günlüğü girişini sil`,deleteEntryConfirm:`Bu giriş günlükten kaldırılacak ve filament, süre ve maliyet katkıları Hızlı İstatistikler'den çıkarılacak. İlgili arşiv (varsa) etkilenmez. Bu işlem geri alınamaz.`,entryDeleted:`Baskı günlüğü girişi silindi`,entryDeleteFailed:`Baskı günlüğü girişi silinemedi`,editEntryTitle:`Baskı günlüğü girişini düzenle`,editEntryDescription:`Bu baskıyı sınıflandırın. Hata Analizi widget'ı bu değerlere göre gruplandırır, böylece güncellemeler istatistiklere anında yansır.`,entryUpdated:`Baskı günlüğü girişi güncellendi`,entryUpdateFailed:`Baskı günlüğü girişi güncellenemedi`,statuses:{completed:`Tamamlandı`,failed:`Başarısız`,stopped:`Durduruldu`,cancelled:`İptal edildi`,skipped:`Atlandı`}}},dispatchToast:{untitled:`Yazdırma işi`,startingPrints:`Yazdırmalar başlatılıyor`,progressSummary:`{{complete}}/{{total}} tamamlandı • İşleniyor: {{processing}}`,expandDetails:`Gönderim ayrıntılarını genişlet`,collapseDetails:`Gönderim ayrıntılarını daralt`,awaitingPrinter:`Yazıcı bekleniyor…`,status:{processing:`İşleniyor`,completed:`Tamamlandı`,failed:`Başarısız`},failed:{generic:`Gönderim başarısız`,upload_failed:`Yazıcıya yükleme başarısız`,start_command_failed:`Yazıcı başlatma komutunu reddetti`},dismiss:`Kapat`},pipelineRuns:{title:`Pipeline çalıştırmaları`,loading:`Yükleniyor…`,empty:`Henüz pipeline çalıştırması yok.`,filter:{pipeline:`Pipeline`,status:`Durum`,target:`Hedef`,all:`Tümü`,allPipelines:`Tüm pipeline'lar`,allStatus:`Tüm durumlar`,allTargets:`Tüm hedefler`,clear:`Filtreleri temizle`,noMatches:`Mevcut filtrelere uyan çalıştırma yok.`},totalCount_one:`{{n}} çalıştırma`,totalCount_other:`{{n}} çalıştırma`,copies:`{{n}} kopya`,failedCount:`{{n}} başarısız`,copyN:`Kopya {{n}}`,retryFailed:`Başarısızları tekrar dene`,retryOf:`#{{n}} yeniden denemesi`,pagination:`{{total}} içinden {{start}}–{{end}}`,toast:{cancelled:`Çalıştırma iptal edildi`,cancelFailed:`İptal başarısız`,retryStarted:`Yeniden deneme başlatıldı`,retryFailed:`Yeniden deneme başarısız`,cleared:`{{n}} çalıştırma temizlendi`,clearFailed:`Temizleme başarısız`},clearLog:`Geçmişi temizle`,clearConfirmTitle:`Geçmiş temizlensin mi?`,clearConfirmBody:`Tamamlanan, başarısız olan, iptal edilen ve kısmen başarısız tüm pipeline çalıştırmaları silinsin mi? Devam eden çalıştırmalar korunur. Bu geri alınamaz.`,clearConfirmAction:`Temizle`,jobStatus:{pending:`beklemede`,awaiting_printer:`yazıcı bekleniyor`,queued:`kuyrukta`,printing:`yazdırılıyor`,completed:`tamamlandı`,failed:`başarısız`,cancelled:`iptal edildi`},cancelledByUser:`Kullanıcı tarafından iptal edildi`},queue:{title:`Baskı Kuyruğu`,subtitle:`Baskı işlerinizi zamanlayın ve yönetin`,filamentShort:{rowBadge:`Atanan makara için yetersiz filament`,rowTooltip:`Sevk planlayıcı bu öğeyi işaretledi. Yuva başına eksikliği görmek ve yine de yazdırıp yazdırmayacağınıza karar vermek için Oynat'a tıklayın.`,confirmTitle:`Yetersiz filament`,confirmIntro:`Atanan makara en az bir yuvayı karşılayamıyor. Yine de yazdırılsın mı?`,lineItem:`Yuva {{slot}}: {{required}} g gerekli, {{remaining}} g kaldı`,unknown:`bilinmiyor`,printAnyway:`Yine de Yazdır`},slicerAmsMapping:{rowBadge:`Bu yazıcı için kaydedilen AMS yuvaları`,rowTooltip:`Bu arşiv, dilimleyicinin seçtiği tam AMS yuvalarını bu öğenin hedeflediği yazıcı için saklar. O yazıcıda yeniden yazdırma, tür ve renge göre yeniden eşleştirmek yerine bu makaraları yeniden kullanabilir.`},editQueueItem:`Kuyruk Öğesini Düzenle`,selectAllPlates:`Tüm {{count}} Plakayı Seç`,deselectAll:`Seçimi Kaldır`,printQueued:`Baskı kuyruğa eklendi`,printQueuedWillStartWhenIdle:`Yazıcı boştayken başlayacak`,itemsQueued:`{{count}} öğe kuyruğa eklendi`,sending:`Gönderiliyor...`,sendingProgress:`Gönderiliyor {{current}}/{{total}}...`,adding:`Ekleniyor...`,addingProgress:`Ekleniyor {{current}}/{{total}}...`,savingProgress:`Kaydediliyor {{current}}/{{total}}...`,clearQueue:`Kuyruğu Temizle`,clearHistory:`Geçmişi Temizle`,emptyQueue:`Kuyruk boş`,position:`Konum`,scheduledTime:`Zamanlanmış Süre`,moveUp:`Yukarı Taşı`,moveDown:`Aşağı Taşı`,startNow:`Şimdi Başlat`,printingInProgress:`Baskı devam ediyor...`,viewArchive:`Arşivi görüntüle`,viewInFileManager:`Dosya Yöneticisinde görüntüle`,itemCount:`{{count}} öğe`,itemCount_plural:`{{count}} öğe`,dragToReorder:`Yeniden sıralamak için sürükleyin (yalnızca ASAP)`,reorderHint:`Konum yalnızca ASAP öğelerini etkiler. Zamanlanmış öğeler belirlenen zamanlarında çalışır.`,sjf:{label:`SJF`,tooltip:`En Kısa İş İlk — planlayıcı daha kısa baskılara öncelik verir`},addedBy:`{{name}} tarafından eklendi`,nextInQueue:`Kuyrukta sıradaki`,clearPlateSuccess:`Plaka temizlendi — sonraki baskıya hazır`,plateNumber:`Plaka {{index}}`,quantity:`Miktar`,quantityHint:`{{count}} kuyruk öğesi oluşturur`,plateQuantityLabel:`{{plate}} baskı sayısı`,plateQuantityTotal_one:`toplam {{count}} baskı`,plateQuantityTotal_other:`toplam {{count}} baskı`,batchOrders:{title:`Toplu siparişler`,emptyTitle:`Toplu sipariş yok`,emptyDescription:`Çok tablalı bir dosyayı ya da bir tablanın birden fazla kopyasını kuyruğa alın; sipariş ilerlemesiyle birlikte burada görünür.`,filter:{active:`Etkin`,completed:`Tamamlanan`,cancelled:`İptal edilen`,all:`Tümü`},status:{active:`Etkin`,completed:`Tamamlandı`,cancelled:`İptal edildi`},noTargets:`Yalnızca gruplama`,noTargetsHint:`Tabla başına hedef adetler gelmeden önce oluşturuldu; hedef yerine kuyruğa alınan baskıları izler.`,dispatchRemaining:`Kalan {{count}} baskıyı kuyruğa al`,dispatchPlate:`Kalanları kuyruğa al`,strandedPlate:`Ayarların kopyalanacağı çalışma yok`,strandedNotice:`Hâlâ beklenen {{owed}} çalışmadan {{runs}} tanesi kuyruğa alınamıyor: o plaka için ayarların kopyalanabileceği kuyrukta veya tamamlanmış bir çalışma kalmadı. Plakayı dosyadan bir kez kuyruğa alın veya siparişi iptal edin.`,dispatched:`{{name}} için kalan baskılar kuyruğa alındı`,plateProgress:`{{target}} baskıdan {{completed}} tamam`,remaining:`{{count}} baskı bekliyor`,failed:`{{count}} başarısız`,printing:`{{count}} yazdırılıyor`,wholeFile:`Dosyanın tamamı`,due:`Son tarih {{date}}`,costSoFar:`şu ana kadar {{amount}}`,costRemaining:`({{amount}} kaldı)`},activeBatches:`Aktif Yığınlar`,batchProgress:`{{total}} öğeden {{completed}} tanesi tamamlandı`,cancelBatch:`Kalanları İptal Et`,batchCancelled:`Kalan yığın öğeleri iptal edildi`,cancelBatchConfirmTitle:`Yığını İptal Et`,cancelBatchConfirmMessage:`Bu sipariş kapatılsın mı? Kuyrukta kalan çalışmalar iptal edilir ve sipariş üretmediklerini artık istemez.`,batch:{defaultName:`Yığın`,label:`{{count}} öğe`,label_plural:`{{count}} öğe`,pendingCount:`{{count}} bekleyen`,pendingCount_plural:`{{count}} bekleyen`,expand:`Yığını genişlet`,collapse:`Yığını daralt`,groupAsBatch:`Yığın olarak grupla…`,groupAsBatchDescription:`Seçilen {{count}} öğeyi tek bir daraltılabilir yığında birleştirin.`,nameLabel:`Yığın adı`,namePlaceholder:`örn. Cuma hediyeleri`,create:`Yığın oluştur`,ungroup:`Gruptan çıkar`,ungroupConfirmTitle:`Yığını gruptan çıkar?`,ungroupConfirmMessage:`Öğeler kuyrukta kalacak ancak artık birlikte gruplanmayacak.`,dragGroup:`Grubu sürükle`},tabs:{batches:`Gruplar`,queue:`Kuyruk`,history:`Geçmiş`,timeline:`Zaman çizelgesi`,pipelines:`Pipeline'lar`},layout:{flatList:`Liste`,byPrinter:`Yazıcıya göre`,groupByPrinter:`Yazıcıya göre grupla`},history:{emptyTitle:`Henüz geçmiş yok`,emptyDescription:`Tamamlanan, iptal edilen ve başarısız baskılar burada görünür.`,showMore:`Daha fazla göster`,showingCount:`{{total}} öğeden {{shown}} tanesi gösteriliyor`},dragGhost:{multiCount:`{{count}} öğe`,batch:`{{name}} ({{count}} kopya)`,batch_plural:`{{name}} ({{count}} kopya)`},sections:{currentlyPrinting:`Şu Anda Yazdırılan`,queued:`Kuyruktaki`,history:`Geçmiş`},status:{pending:`Beklemede`,waiting:`Bekliyor`,printing:`Yazdırılıyor`,paused:`Duraklatıldı`,completed:`Tamamlandı`,failed:`Başarısız`,skipped:`Atlandı`,cancelled:`İptal edildi`},summary:{printing:`Yazdırılıyor`,queued:`Kuyrukta`,totalTime:`Toplam Kuyruk Süresi`,totalWeight:`Toplam Kuyruk Ağırlığı`,history:`Geçmiş`},filter:{allPrinters:`Tüm Yazıcılar`,unassigned:`Atanmamış`,allStatus:`Tüm Durumlar`,allLocations:`Tüm Konumlar`,any:`Herhangi`},sort:{byPosition:`Konuma Göre Sırala`,byName:`Ada Göre Sırala`,byPrinter:`Yazıcıya Göre Sırala`,bySchedule:`Zamana Göre Sırala`,byDate:`Tarihe Göre Sırala`,ascendingOldest:`Artan (önce en eski)`,descendingNewest:`Azalan (önce en yeni)`},badges:{staged:`Hazırlandı`,requiresPrevious:`Önceki başarı gerekli`,autoPowerOff:`Otomatik kapanma`,gcodeInjection:`G-kod`},empty:{title:`Zamanlanmış baskı yok`,description:`Bağlam menüsündeki "Zamanla" seçeneğini kullanarak Arşivler sayfasından bir baskı zamanlayın veya başlamak için dosyaları sürükleyip bırakın.`},time:{etaIfStartedNow:`Bu iş şimdi başlatılırsa tamamlanma saati`,whenFree:`Bir yazıcı boşaldığında`,overdue:`Gecikmiş`,now:`Şimdi`,lessThanMinute:`Bir dakikadan az`,inMinutes:`{{count}} dk içinde`,inHours:`{{count}} saat içinde`},actions:{startPrint:`Baskıyı Başlat`,stopPrint:`Baskıyı Durdur`,requeue:`Yeniden Kuyrukla`},bulkEdit:{title:`{{count}} Öğeyi Düzenle`,title_plural:`{{count}} Öğeyi Düzenle`,description:`Yalnızca değiştirilen ayarlar seçili öğelere uygulanacak.`,printer:`Yazıcı`,noChange:`— Değişiklik yok —`,queueOptions:`Kuyruk Seçenekleri`,staged:`Hazırlandı (manuel başlatma)`,autoPowerOff:`Baskı sonrası otomatik kapanma`,requirePrevious:`Önceki başarı gerekli`,gcodeInjection:`G-kod enjekte et`,printOptions:`Baskı Seçenekleri`,bedLevelling:`Tabla seviyelendirme`,flowCalibration:`Akış kalibrasyonu`,vibrationCalibration:`Titreşim kalibrasyonu`,layerInspection:`İlk katman denetimi`,timelapse:`Zaman atlamalı video`,useAms:`AMS Kullan`,nozzleOffsetCali:`Nozül ofset kalibrasyonu`,applyChanges:`Değişiklikleri Uygula`,selectAll:`Tümünü Seç`,deselectAll:`Seçimi Kaldır`,selected:`{{count}} seçildi`,editSelected:`Seçilenleri Düzenle`,cancelSelected:`Seçilenleri İptal Et`},confirm:{cancelTitle:`Zamanlanmış Baskıyı İptal Et`,cancelMessage:`"{{name}}" iptal etmek istediğinizden emin misiniz?`,stopTitle:`Baskıyı Durdur`,stopMessage:`"{{name}}" mevcut baskıyı durdurmak istediğinizden emin misiniz? Bu, yazıcıdaki baskı işini iptal edecek.`,removeTitle:`Geçmişten Kaldır`,removeMessage:`"{{name}}" kuyruk geçmişinden kaldırmak istediğinizden emin misiniz?`,clearHistoryTitle:`Geçmişi Temizle`,clearHistoryMessage:`Geçmişten {{count}} öğenin tümünü kaldırmak istediğinizden emin misiniz?`,cancelButton:`Baskıyı İptal Et`,stopButton:`Baskıyı Durdur`,thisPrint:`bu baskı`,thisItem:`bu öğe`},toast:{cancelled:`Kuyruk öğesi iptal edildi`,cancelFailed:`Öğe iptal edilemedi`,removed:`Kuyruk öğesi kaldırıldı`,keptForOrder:`Kaldırılmak yerine iptal edildi: yığın siparişinin bu plakayı yeniden kuyruğa alabileceği tek çalışma bu`,historyKeptForOrders:`Yığın siparişlerinin hâlâ ihtiyaç duyduğu {{kept}} tanesi korundu.`,removeFailed:`Öğe kaldırılamadı`,stopped:`Baskı durduruldu`,stopFailed:`Baskı durdurulamadı`,released:`Baskı kuyruğa bırakıldı`,startFailed:`Baskı başlatılamadı`,reorderFailed:`Kuyruk yeniden sıralanamadı`,historyCleared:`{{count}} geçmiş öğesi temizlendi`,clearHistoryFailed:`Geçmiş temizlenemedi`,updateFailed:`Öğeler güncellenemedi`,bulkCancelled:`{{count}} öğe iptal edildi`,bulkCancelFailed:`Öğeler iptal edilemedi`,batchCreated:`"{{name}}" yığını oluşturuldu`,batchCreateFailed:`Yığın oluşturma başarısız`,batchUngrouped:`{{count}} öğe gruptan çıkarıldı`,batchUngroupFailed:`Yığını gruptan çıkarma başarısız`,resumedAfterFailure:`Kuyruk devam ettirildi — {{restored}} iş bekleyene geri alındı`,resumeAfterFailureFailed:`Kuyruk devam ettirilemedi`},resumeAfterFailure:{banner:`{{printer}} önceki bir baskı hatası nedeniyle engellendi — {{count}} iş atlandı`,bannerHint:`Yazıcı sorununu çözün, ardından atlanan işleri geri yüklemek ve engellemeyi kaldırmak için devam ettirin.`,button:`Hatadan sonra devam et`,confirmTitle:`Hatadan sonra kuyruğa devam edilsin mi?`,confirmMessage:`{{printer}} üzerindeki {{count}} atlanan işi bekleyene geri yükleyin ve önceki baskı engelini kaldırın. Devam etmeden önce yazıcının hazır olduğundan emin olun.`},timeline:{listView:`Liste`,timelineView:`Zaman Çizelgesi`,unassigned:`Atanmamış`,noData:`Bu gün için zamanlanmış baskı yok`,nothingCommitted:`Bu pencerede onaylanmış programlar yok. Hazırlanmış öğeler, beklemedeki öğeler ve boştaki yazıcılardaki ASAP işleri gösterilmez — burada görmek için zamanlanmış bir saat belirleyin veya hazırlanmış bir öğeyi serbest bırakın.`,allDoneBy:`Tüm baskıların {{time}}'e kadar bitmesi tahmin ediliyor`,staged:`Hazırlandı`,filterAll:`Tümünü Göster`,filterPrinting:`Yazdırılıyor`,filterQueued:`Kuyrukta`,time:{anyMoment:`her an`,minutesLeft:`{{minutes}}dk kaldı`,hoursLeft:`{{hours}}sa kaldı`,hoursMinutesLeft:`{{hours}}sa {{minutes}}dk kaldı`},day:{previous:`Önceki gün`,next:`Sonraki gün`,today:`Bugün`},window:{back12h:`12 saat geri`,forward12h:`12 saat ileri`,now:`Şimdi`},printerColumnHeader:`Yazıcı`},permissions:{noStopPrint:`Baskıları durdurma izniniz yok`,noStartPrint:`Baskıları başlatma izniniz yok`,noEdit:`Bu kuyruk öğesini düzenleme izniniz yok`,noCancel:`Bu kuyruk öğesini iptal etme izniniz yok`,noRequeue:`Öğeleri yeniden kuyruklama izniniz yok`,noRemove:`Bu kuyruk öğesini kaldırma izniniz yok`,noClearHistory:`Tüm geçmişi temizleme izniniz yok`,noEditItems:`Kuyruk öğelerini düzenleme izniniz yok`,noCancelItems:`Kuyruk öğelerini iptal etme izniniz yok`}},stats:{title:`İstatistikler`,subtitle:`Yeniden düzenlemek için widget'ları sürükleyin. Gizlemek için göz simgesine tıklayın.`,overview:`Genel Bakış`,totalPrints:`Toplam Baskı`,successRate:`Başarı Oranı`,totalPrintTime:`Toplam Baskı Süresi`,printTime:`Baskı Süresi`,totalFilament:`Toplam Kullanılan Filament`,filamentUsed:`Kullanılan Filament`,filamentCost:`Filament Maliyeti`,totalCost:`Toplam Maliyet`,energyUsed:`Kullanılan Enerji`,energyCost:`Enerji Maliyeti`,energyWarmingUpTooltip:`Enerji takibi hâlâ saatlik anlık görüntüler topluyor. Tarih aralığı toplamları, seçilen aralıktan önce en az bir anlık görüntü olduğunda doğru hâle gelir. Erken değerler eksik sayabilir.`,averagePrintTime:`Ortalama Baskı Süresi`,printsPerDay:`Günlük Baskı`,byPrinter:`Yazıcıya Göre`,printsByPrinter:`Yazıcıya Göre Baskılar`,byMaterial:`Malzemeye Göre`,byMonth:`Aya Göre`,last7Days:`Son 7 Gün`,last30Days:`Son 30 Gün`,last90Days:`Son 90 Gün`,allTime:`Tüm Zamanlar`,quickStats:`Hızlı İstatistikler`,printActivity:`Baskı Etkinliği`,filamentTypes:`Filament Türleri`,filamentTrends:`Filament Trendleri`,failureAnalysis:`Başarısızlık Analizi`,timeAccuracy:`Süre Doğruluğu`,successful:`Başarılı:`,failed:`Başarısız:`,cancelled:`İptal edildi:`,perfectEstimate:`%100 = mükemmel tahmin`,noTimeAccuracyData:`Henüz süre doğruluğu verisi yok`,noFilamentData:`Filament verisi mevcut değil`,noPrinterData:`Yazıcı verisi mevcut değil`,noPrintData:`Baskı verisi mevcut değil`,noPrintDataLast30Days:`Son 30 günde baskı verisi yok`,failureReasons:`Başarısızlık Nedenleri`,topFailureReasons:`En Sık Başarısızlık Nedenleri`,failedPrintsCount:`{{total}} baskının {{failed}} tanesi başarısız`,lastWeekRate:`Geçen hafta: %{{rate}}`,resetLayout:`Düzeni Sıfırla`,recalculateCosts:`Maliyetleri Yeniden Hesapla`,recalculateCostsHint:`Mevcut filament fiyatlarını kullanarak tüm arşiv maliyetlerini yeniden hesapla`,exportStats:`İstatistikleri Dışa Aktar`,exportAsCsv:`CSV Olarak Dışa Aktar`,exportAsExcel:`Excel Olarak Dışa Aktar`,hiddenCount:`{{count}} Gizli`,exportDownloaded:`Dışa aktarma indirildi`,exportFailed:`Dışa aktarma başarısız`,layoutReset:`Düzen sıfırlandı`,recalculatedCosts:`{{count}} arşiv için maliyetler yeniden hesaplandı`,recalculateFailed:`Maliyetler yeniden hesaplanamadı`,loadingStats:`İstatistikler yükleniyor...`,noPermissionResetLayout:`Düzeni sıfırlama izniniz yok`,noPermissionRecalculate:`Maliyetleri yeniden hesaplama izniniz yok`,noPrintDataInRange:`Seçili aralıkta baskı verisi yok`,periodFilament:`Dönem Filamenti`,periodCost:`Dönem Maliyeti`,avgPerPrint:`Baskı Başına Ort.`,usageOverTime:`Zaman İçinde Kullanım`,energyOverTime:`Zaman İçinde Enerji`,filamentByWeight:`Ağırlık`,printDuration:`Baskı Süresi`,printerUtilization:`Yazıcı Kullanımı`,filamentSuccess:`Malzemeye Göre Başarı`,printHabits:`Baskı Alışkanlıkları`,printTimeOfDay:`Günün Baskı Saati`,colorDistribution:`Renk Dağılımı`,noColorData:`Renk verisi mevcut değil`,records:`Kayıtlar`,longestPrint:`En Uzun Baskı`,heaviestPrint:`En Ağır Baskı`,mostExpensivePrint:`En Pahalı`,busiestDay:`En Yoğun Gün`,successStreak:`Başarı Serisi`,streakPrint:`ardışık baskı`,streakPrints:`{{count}} ardışık baskı`,printerStats:`Yazıcı İstatistikleri`,hours:`saat`,avgPrints:`Ort. baskı`,noArchiveData:`Baskı verisi mevcut değil`,filamentByTime:`Süre`,avgWeight:`Ort. ağırlık`,avgTime:`Ort. süre`,filamentByPrints:`Baskılar`,timeframe:{today:`Bugün`,"this-week":`Bu Hafta`,"this-month":`Bu Ay`,"last-7":`Son 7 Gün`,"last-30":`Son 30 Gün`,"last-90":`Son 90 Gün`,"this-year":`Bu Yıl`,"all-time":`Tüm Zamanlar`,custom:`Özel Aralık`,from:`Başlangıç`,to:`Bitiş`},allUsers:`Tüm Kullanıcılar`,noUser:`Kullanıcı Yok (Sistem)`,filterByUser:`Kullanıcıya Göre Filtrele`},maintenance:{title:`Bakım`,overview:`Genel Bakış`,allOk:`Tüm bakım güncel`,dueCount:`{{count}} öğe bekliyor`,dueCount_plural:`{{count}} öğe bekliyor`,warningCount:`{{count}} uyarı`,warningCount_plural:`{{count}} uyarı`,totalPrintTime:`Toplam Baskı Süresi`,nextMaintenance:`Sonraki Bakım`,nothingDue:`Bekleyen yok`,tasks:`Görevler`,lastPerformed:`Son yapılan`,interval:`Aralık`,hoursRemaining:`{{hours}}sa kaldı`,hoursOverdue:`{{hours}}sa gecikmiş`,markDone:`Tamamlandı Olarak İşaretle`,performMaintenance:`Bakım Gerçekleştir`,history:`Geçmiş`,noHistory:`Bakım geçmişi yok`,editPrintHours:`Baskı Saatlerini Düzenle`,currentHours:`Mevcut Saat`,statusTab:`Durum`,settingsTab:`Ayarlar`,overdueCount:`{{count}} gecikmiş`,dueSoonCount:`{{count}} yakında`,dueSoon:`Yakında`,allGood:`Her şey iyi`,overdueBy:`{{duration}} gecikmiş`,dueIn:`{{duration}} içinde`,timeLeft:`{{duration}} kaldı`,day:`1 gün`,days:`{{count}} gün`,week:`1 hafta`,weeks:`{{count}} hafta`,month:`1 ay`,months:`{{count}} ay`,year:`1 yıl`,maintenanceTypes:`Bakım Türleri`,maintenanceTypesDescription:`Sistem türleri ve özel bakım görevleriniz`,addCustomType:`Özel Tür Ekle`,restoreDefaults:`Varsayılan Görevleri Geri Yükle`,intervalType:`Aralık Türü`,intervalValue:`Aralık ({{type}})`,icon:`Simge`,documentationLink:`Dokümantasyon Bağlantısı (isteğe bağlı)`,assignToPrinters:`Yazıcılara Ata`,selectAtLeastOnePrinter:`En az bir yazıcı seçin`,addType:`Tür Ekle`,custom:`Özel`,printHours:`Baskı Saatleri`,calendarDays:`Takvim Günleri`,exampleName:`örn., HEPA Filtresini Değiştir`,viewDocumentation:`Dokümantasyonu görüntüle`,timeBasedInterval:`Zaman tabanlı aralık`,intervalOverrides:`Aralık Geçersiz Kılmaları`,intervalOverridesDescription:`Belirli yazıcılar için aralıkları özelleştir`,assignedToPrinters:`Atanan yazıcılar:`,noPrintersAssigned:`Atanan yazıcı yok`,addPrinterShort:`Ekle:`,printersAssignedClick:`{{count}} yazıcı atandı - yönetmek için tıklayın`,removeFromPrinter:`Bu yazıcıdan kaldır`,types:{lubricateCarbonRods:`Karbon Çubukları Yağla`,lubricateRails:`Lineer Rayları Yağla`,cleanNozzle:`Nozulu/Hotend Temizle`,checkBelts:`Kayış Gerginliğini Kontrol Et`,cleanBuildPlate:`Baskı Plakasını Temizle`,checkExtruder:`Ekstrüder Dişlilerini Kontrol Et`,checkCooling:`Soğutma Fanlarını Kontrol Et`,generalInspection:`Genel Denetim`,cleanCarbonRods:`Karbon Çubukları Temizle`,lubricateSteelRods:`Çelik Çubukları Yağla`,cleanSteelRods:`Çelik Çubukları Temizle`,cleanLinearRails:`Lineer Rayları Temizle`,checkPtfeTube:`PTFE Tüpünü Kontrol Et`,replaceHepaFilter:`HEPA Filtresini Değiştir`,replaceCarbonFilter:`Karbon Filtresini Değiştir`,lubricateLeftNozzleRail:`Sol Nozul Rayını Yağla`},maintenanceComplete:`Bakım tamamlandı olarak işaretlendi`,typeUpdated:`Bakım türü güncellendi`,typeDeleted:`Bakım türü silindi`,defaultsRestored:`{{count}} varsayılan görev geri yüklendi`,printHoursUpdated:`Baskı saatleri güncellendi`,printerAssigned:`Yazıcı atandı`,printerRemoved:`Yazıcı kaldırıldı`,deleteTypeConfirm:`"{{name}}" silinsin mi?`,deleteSystemTypeTitle:`Varsayılan bakım görevi silinsin mi?`,deleteSystemTypeMessage:`"{{name}}" varsayılan bakım görevini silmek istediğinizden emin misiniz?`,noPermissionUpdate:`Bakım öğelerini güncelleme izniniz yok`,noPermissionPerform:`Bakım gerçekleştirme izniniz yok`,noPermissionEditTypes:`Bakım türlerini düzenleme izniniz yok`,noPermissionDeleteTypes:`Bakım türlerini silme izniniz yok`,noPermissionEditHours:`Baskı saatlerini düzenleme izniniz yok`,noPermissionRemovePrinter:`Yazıcı atamalarını kaldırma izniniz yok`,noPermissionAssignPrinter:`Yazıcı atama izniniz yok`,noPermissionEditIntervals:`Aralıkları düzenleme izniniz yok`,configureSettings:`Bakım türlerini ve aralıklarını yapılandır`},settings:{sliceEngine:`Dilimleme motoru`,sliceEngineSidecar:`Sunucu sidecar`,sliceEngineSidecarHint:`Dilimleme sunucuda, dilimleyici sidecar konteynerinde çalışır.`,sliceEngineBrowser:`Tarayıcıda`,sliceEngineBrowserHint:`Dilimleme sunucu olmadan bu cihazda çalışır.`,title:`Ayarlar`,general:`Genel`,tabs:{general:`Genel`,smartPlugs:`Akıllı Prizler`,sensors:`Sensörler`,notifications:`Bildirimler`,queue:`İş Akışı`,queueDispatch:`Kuyruk ve Sevkıyat`,queuePipelines:`Pipeline'lar`,filament:`Filament`,network:`Ağ`,apiKeys:`API Anahtarları`,virtualPrinter:`Sanal Yazıcı`,spoolbuddy:`SpoolBuddy`,failureDetection:`Başarısızlık Algılama`,users:`Kimlik Doğrulama`,backup:`Yedekleme`,emailAuth:`E-posta Kimlik Doğrulama`,ldap:`LDAP`,twoFa:`İki Faktörlü Kimlik Doğrulama`,oidc:`SSO / OIDC`,security:`Güvenlik`},spoolbuddy:{infoTitle:`SpoolBuddy cihazları`,infoBody:`SpoolBuddy kioskları heartbeat üzerinden otomatik olarak kayıt olur. Artık kullanılmıyorsa veya bir daemon çökmesi nedeniyle eski bir kopya kaldıysa bir cihazı buradan kayıttan çıkarın.`,duplicatesTitle:`{{count}} cihaz kayıtlı`,duplicatesBody:`Yalnızca ilk kayıtlı cihaz kiosk arayüzü tarafından kullanılır. Bunlardan biri çökme sonucu kalmış eski bir kopya ise kayıttan çıkarın — çevrimiçi bir cihaz sonraki heartbeat'inde kendini yeniden kaydedecek.`,empty:`Henüz kayıtlı SpoolBuddy cihazı yok.`,online:`Çevrimiçi`,offline:`Çevrimdışı`,unregister:`Kayıttan Çıkar`,unregisterSuccess:`Cihaz kayıttan çıkarıldı`,unregisterError:`Cihaz kayıttan çıkarılamadı`,confirmTitle:`SpoolBuddy cihazı kayıttan çıkarılsın mı?`,confirmBody:`Bu, "{{hostname}}" ({{deviceId}}) cihazını veritabanından kaldıracak. Cihaz çevrimiçiyse, sonraki heartbeat'inde kendini yeniden kaydedecek.`,ipAddress:`IP adresi`,firmware:`Firmware`,lastSeen:`Son görülme`,daemonUptime:`Daemon çalışma süresi`,systemUptime:`Sistem çalışma süresi`,never:`asla`,nfc:`NFC`,scale:`Tartı`,cpuTemp:`CPU sıcaklığı`,cpuLoad:`CPU yükü`,memory:`Bellek`,disk:`Disk`,update:`Güncelle`,updateConfirmTitle:`Spoolbuddy daemon güncellensin mi?`,updateConfirmBody:`"{{hostname}}" cihazında yazılım güncellemesi tetiklensin mi? Güncelleme uygulandığında daemon yeniden başlayacak.`,restartBrowser:`Tarayıcıyı Yeniden Başlat`,restartBrowserConfirmTitle:`Kiosk tarayıcısı yeniden başlatılsın mı?`,restartBrowserConfirmBody:`"{{hostname}}" cihazındaki kiosk tarayıcısı yeniden başlatılsın mı? Ekran kısa bir süre kararacak.`,restartDaemon:`Daemon'u Yeniden Başlat`,restartDaemonConfirmTitle:`Spoolbuddy daemon yeniden başlatılsın mı?`,restartDaemonConfirmBody:`"{{hostname}}" üzerindeki Spoolbuddy daemon yeniden başlatılsın mı? Cihaz birkaç saniye çevrimdışı olacak.`,reboot:`Yeniden Başlat`,rebootConfirmTitle:`Cihaz yeniden başlatılsın mı?`,rebootConfirmBody:`"{{hostname}}" yeniden başlatılsın mı? Cihaz yaklaşık bir dakika çevrimdışı olacak.`,shutdown:`Kapat`,shutdownConfirmTitle:`Cihaz kapatılsın mı?`,shutdownConfirmBody:`"{{hostname}}" kapatılsın mı? Tekrar açmak için fiziksel erişime ihtiyacınız olacak.`,commandConfirm:`Onayla`,commandQueued:`Komut kuyruğa alındı`,commandError:`Komut gönderilemedi`},ldap:{title:`LDAP Kimlik Doğrulama`,enabledDesc:`LDAP kimlik doğrulama etkin`,disabledDesc:`LDAP kimlik doğrulama devre dışı`,disabledHint:`Aşağıdaki LDAP ayarlarını yapılandırın ve kaydedin, ardından etkinleştirin.`,enabled:`LDAP kimlik doğrulama etkinleştirildi`,disabled:`LDAP kimlik doğrulama devre dışı bırakıldı`,feature1:`Kullanıcılar LDAP kimlik bilgileriyle giriş yapabilir`,feature2:`Yerel yönetici hesabı yedek olarak kalır`,feature3:`LDAP grupları giriş sırasında BamBuddy gruplarına eşlenir`,serverConfig:`LDAP Sunucu Yapılandırması`,serverUrl:`Sunucu URL`,serverUrlHint:`SSL için ldaps:// veya StartTLS ile ldap:// kullanın`,security:`Güvenlik`,securityHint:`StartTLS düz bir bağlantıyı TLS'ye yükseltir. LDAPS başlangıçtan itibaren TLS kullanır.`,bindDn:`Bind DN (Servis Hesabı)`,bindPassword:`Bind Parolası`,searchBase:`Arama Tabanı DN`,userFilter:`Kullanıcı Arama Filtresi`,userFilterHint:`{username} giriş kullanıcı adıyla değiştirilir. OpenLDAP için (uid={username}) kullanın.`,advanced:`Gelişmiş`,autoProvision:`Kullanıcıları otomatik tedarik et`,autoProvisionHint:`İlk LDAP girişinde otomatik olarak BamBuddy hesabı oluştur`,defaultGroup:`Varsayılan grup`,defaultGroupNone:`— Hiçbiri (yedek yok) —`,defaultGroupHint:`Bir LDAP kullanıcısı kimlik doğruladığında ancak eşlenmiş herhangi bir LDAP grubunda listelenmediğinde atanan yedek grup. Eşlenmemiş kullanıcıları izinsiz bırakmak için boş bırakın.`,groupMapping:`Grup Eşleme (JSON)`,groupMappingHint:`LDAP grup DN'lerini BamBuddy gruplarına eşle. Kullanılabilir gruplar: `,testConnection:`Bağlantıyı Test Et`,settingsSaved:`LDAP ayarları kaydedildi`,errors:{serverRequired:`LDAP sunucu URL gerekli`,searchBaseRequired:`Arama tabanı DN gerekli`,enableAuthFirst:`Önce kimlik doğrulamayı etkinleştirin`,configureLdapFirst:`Önce LDAP ayarlarını kaydedin`}},email:{smtpSettings:`SMTP Yapılandırması`,smtpHost:`SMTP Sunucusu`,smtpPort:`SMTP Portu`,security:`Güvenlik`,authentication:`Kimlik Doğrulama`,username:`Kullanıcı Adı`,password:`Parola`,fromEmail:`Gönderen E-posta`,fromName:`Gönderen Adı`,testConnection:`SMTP Bağlantısını Test Et`,testRecipient:`Test Alıcı E-postası`,sendTest:`Test E-postası Gönder`,sending:`Gönderiliyor...`,save:`Ayarları Kaydet`,saving:`Kaydediliyor...`,advancedAuth:`Gelişmiş Kimlik Doğrulama`,advancedAuthEnabled:`Gelişmiş Kimlik Doğrulama etkin`,advancedAuthEnabledDesc:`E-posta tabanlı kullanıcı yönetimi özellikleri aktif. Yeni kullanıcılar e-posta ile otomatik oluşturulan parolalar alacak ve kullanıcılar parola sıfırlama özelliğiyle parolalarını sıfırlayabilecek.`,advancedAuthDisabled:`Gelişmiş Kimlik Doğrulama devre dışı`,advancedAuthDisabledDesc:`Kullanıcı yönetimi için e-posta tabanlı özellikleri etkinleştirmek için gelişmiş kimlik doğrulamayı etkinleştirin.`,enable:`Etkinleştir`,disable:`Devre dışı bırak`,feature1:`Parolalar otomatik oluşturulur ve yeni kullanıcılara e-posta ile gönderilir`,feature2:`Kullanıcılar kullanıcı adı veya e-posta ile giriş yapabilir`,feature3:`Parola unuttum özelliği kullanılabilir`,feature4:`Yöneticiler kullanıcı parolalarını e-posta ile sıfırlayabilir`,errors:{requiredFields:`Lütfen tüm zorunlu alanları doldurun`,usernameRequired:`Kimlik doğrulama etkinken kullanıcı adı zorunludur`,enterTestEmail:`Lütfen test e-posta adresi girin`,smtpServerAndEmail:`Test etmeden önce lütfen SMTP Sunucusu ve Gönderen E-posta alanlarını doldurun`,usernamePasswordRequired:`Kimlik doğrulama etkinken Kullanıcı Adı ve Parola zorunludur`,configureSmtpFirst:`Lütfen önce SMTP ayarlarını yapılandırın ve test edin`,enableAuthFirst:`E-posta tabanlı özellikleri kullanmak için lütfen önce kimlik doğrulamayı etkinleştirin.`},success:{settingsSaved:`SMTP ayarları başarıyla kaydedildi`},securityOptions:{starttls:`STARTTLS (Port 587)`,ssl:`SSL/TLS (Port 465)`,none:`Hiçbiri (Port 25)`},authOptions:{enabled:`Etkin`,disabled:`Devre dışı`}},appearance:`Görünüm`,notifications:`Bildirimler`,smartPlugs:`Akıllı Prizler`,spoolman:`Spoolman`,updates:`Güncellemeler`,language:`Dil`,languageDescription:`Tercih ettiğiniz dili seçin`,theme:`Tema`,themeLight:`Açık`,themeDark:`Koyu`,themeSystem:`Sistem`,defaultView:`Varsayılan Görünüm`,defaultViewDescription:`Uygulamayı açarken gösterilecek sayfa`,checkForUpdates:`Güncellemeleri Kontrol Et`,autoUpdate:`Otomatik Güncelleme`,currentVersion:`Mevcut Sürüm`,latestVersion:`En Son Sürüm`,upToDate:`Güncelsiniz`,updateAvailable:`Güncelleme mevcut`,notificationLanguage:`Bildirim Dili`,notificationLanguageDescription:`Push bildirimleri için dil`,bedCooledThreshold:`Tabla Soğuma Eşiği`,bedCooledThresholdDescription:`Bir baskıdan sonra tablanın soğumuş kabul edildiği sıcaklık`,userNotificationsEnabled:`Kullanıcı Bildirimleri`,userNotificationsEnabledDescription:`Baskı işi olayları için kullanıcı bildirim menüsünü ve e-posta bildirimlerini etkinleştir. Gelişmiş Kimlik Doğrulama gerektirir.`,userNotificationsDisabledHint:`Kullanıcı bildirimlerini kullanmak için Gelişmiş Kimlik Doğrulamayı etkinleştirin.`,notificationProviders:`Bildirim Sağlayıcıları`,addProvider:`Sağlayıcı Ekle`,editProvider:`Sağlayıcıyı Düzenle`,providerType:`Sağlayıcı Türü`,testNotification:`Test Bildirimi`,testSuccess:`Test bildirimi başarıyla gönderildi`,testFailed:`Test bildirimi gönderilemedi`,quietHours:`Sessiz Saatler`,quietHoursDescription:`Bu saatler arasında rahatsız etme`,quietHoursStart:`Başlangıç`,quietHoursEnd:`Bitiş`,events:{title:`Bildirim Olayları`,printStart:`Baskı Başladı`,printComplete:`Baskı Tamamlandı`,printFailed:`Baskı Başarısız`,printStopped:`Baskı Durduruldu`,printProgress:`İlerleme Kilometre Taşları`,printProgressDescription:`%25, %50, %75'te bildir`,printerOffline:`Yazıcı Çevrimdışı`,printerError:`Yazıcı Hatası`,filamentLow:`Az Filament`,maintenanceDue:`Bakım Zamanı`,maintenanceDueDescription:`Bakım gerektiğinde bildir`},smartPlug:{title:`Akıllı Prizler`,add:`Akıllı Priz Ekle`,edit:`Akıllı Prizi Düzenle`,name:`Ad`,ipAddress:`IP Adresi`,linkedPrinter:`Bağlı Yazıcı`,autoOn:`Otomatik Aç`,autoOnDescription:`Baskı başladığında aç`,autoOff:`Otomatik Kapat`,autoOffDescription:`Baskı tamamlandıktan sonra kapat`,offDelay:`Kapatma Gecikmesi`,offDelayMinutes:`Baskıdan sonra dakika`,offDelayTemp:`Nozul sıcaklığın altında olduğunda`,currentState:`Mevcut Durum`,turnOn:`Aç`,turnOff:`Kapat`},filamentTracking:`Filament Takibi`,filamentTrackingDesc:`Filament makaralarınızı nasıl takip edeceğinizi seçin. Yerleşik envanteri kullanabilir veya harici bir Spoolman sunucusuna bağlanabilirsiniz.`,autoAddUnknownRfid:`Bilinmeyen RFID makaralarını otomatik ekle`,autoAddUnknownRfidDesc:`Bilinmeyen RFID etiketli bir makara algılandığında otomatik olarak envantere bir kayıt oluşturur. Çoğaltmaları önlemek için yeni makaraları manuel olarak önceden kaydediyorsanız kapatın.`,filamentChecks:`Filament kontrolleri`,disableFilamentWarnings:`Filament uyarılarını devre dışı bırak`,disableFilamentWarningsDesc:`Yazdırırken veya kuyruğa eklerken yetersiz filamentle ilgili uyarıları gösterme`,preferLowestFilament:`En az kalan filamenti tercih et`,preferLowestFilamentDesc:`Birden fazla makara eşleştiğinde, kalan filamenti en az olanı kullan`,preferLowestFilamentBackupNote:`Yalnızca yazıcıda AMS Filament Backup etkinleştirildiğinde uygulanır — aksi takdirde seçilen makara bittiğinde yazıcı ikinci bir makaraya geçemez.`,trackingModeBuiltIn:`Yerleşik Envanter`,trackingModeBuiltInDesc:`RFID otomatik eşleştirme ve kullanım takibi dahil`,trackingModeSpoolmanDesc:`Harici filament yönetim sunucusu`,builtInFeatureRfid:`AMS'deki Bambu Lab RFID makaralarını otomatik olarak algılar`,builtInFeatureUsage:`Baskı başına filament tüketimini takip eder`,builtInFeatureCatalog:`Makaraları, renkleri ve K faktör profillerini yönetin`,builtInFeatureThirdParty:`Üçüncü taraf makaralar envanter makaralarına atanabilir`,amsSyncButton:`AMS'den Ağırlıkları Senkronize Et`,amsSyncTitle:`AMS'den Makara Ağırlıklarını Senkronize Et`,amsSyncMessage:`Bu, bağlı yazıcılardan gelen mevcut AMS kalan% değerleriyle tüm envanter makara ağırlıklarının üzerine yazar. Bozuk ağırlık verilerinden kurtarmak için bunu kullanın. Yazıcılar çevrimiçi olmalıdır.`,amsSyncing:`Senkronize ediliyor...`,amsSyncSuccess:`{{synced}} makara senkronize edildi, {{skipped}} atlandı`,amsSyncError:`AMS'den ağırlıklar senkronize edilemedi`,spoolmanAmsSyncButton:`AMS'den Spoolman Ağırlıklarını Senkronize Et`,spoolmanAmsSyncTitle:`AMS'den Spoolman Makara Ağırlıklarını Senkronize Et`,spoolmanAmsSyncMessage:`Bu, bağlı yazıcılardan gelen mevcut AMS kalan% değerlerine göre tüm Spoolman makara ağırlıklarını güncelleyecek. Yazıcılar çevrimiçi olmalıdır.`,spoolmanAmsSyncing:`Senkronize ediliyor...`,spoolmanAmsSyncSuccess:`{{synced}} makara senkronize edildi, {{skipped}} atlandı`,spoolmanAmsSyncError:`Spoolman ağırlıkları AMS'den senkronize edilemedi`,spoolmanAmsSyncErrorUnreachable:`Spoolman ağırlıkları senkronize edilemedi (Spoolman erişilemez)`,spoolmanAmsSyncErrorNotConfigured:`Spoolman ağırlıkları senkronize edilemedi (Spoolman yapılandırılmamış)`,spoolmanNotConfigured:`Spoolman yapılandırılmamış`,spoolmanFilamentCatalogTitle:`Spoolman Filament Kataloğu`,spoolmanFilamentCatalogDesc:`Spoolman örneğinizden filament adları ve boş ağırlıkları. Ad ve makara ağırlığı burada düzenlenebilir; diğer tüm özellikler doğrudan Spoolman'da yönetilir.`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`Spoolman sunucunuzun URL'si (örn., http://localhost:7912)`,spoolmanConnected:`Bağlı`,spoolmanDisconnected:`Bağlı değil`,status:`Durum`,connect:`Bağlan`,disconnect:`Bağlantıyı Kes`,howSyncWorks:`Senkronizasyon Nasıl Çalışır`,syncInfoRfidOnly:`Yalnızca RFID'li resmi Bambu Lab makaraları senkronize edilir`,syncInfoAutoCreate:`Yeni makaralar ilk senkronizasyonda Spoolman'da otomatik olarak oluşturulur`,syncInfoThirdPartySkipped:`Bambu Lab dışı makaralar (üçüncü taraf, yeniden doldurulmuş) atlanır`,linkingExistingSpools:`Mevcut Makaraları Bağlama`,linkingExistingSpoolsDesc:`Mevcut Spoolman makaralarını AMS'inize bağlamak için, bir AMS yuvasının üzerine gelin ve "Spoolman'a Bağla"ya tıklayın.`,syncMode:`Senkronizasyon Modu`,syncModeAuto:`Otomatik`,syncModeManual:`Yalnızca Manuel`,syncModeAutoDesc:`Değişiklikler algılandığında AMS verisi otomatik olarak senkronize edilir`,syncModeManualDesc:`Yalnızca manuel olarak tetiklendiğinde senkronize et`,syncAmsData:`AMS Verisini Senkronize Et`,syncAmsDataDesc:`Yazıcı AMS verisini manuel olarak Spoolman'a senkronize et`,allPrinters:`Tüm Yazıcılar`,noDefaultPrinter:`Varsayılan yok (her seferinde sor)`,sidebarOrder:`Kenar çubuğu sırası`,saveThumbnails:`Küçük resimleri kaydet`,captureFinishPhoto:`Bitiş fotoğrafı çek`,noPrintersConfigured:`Yapılandırılmış yazıcı yok`,archiveMode:{always:`Her zaman arşiv girişi oluştur`,never:`Asla arşiv girişi oluşturma`,ask:`Her seferinde sor`},checkForUpdatesLabel:`Güncellemeleri kontrol et`,checkPrinterFirmware:`Yazıcı firmware'ini kontrol et`,includeBetaUpdates:`Beta sürümleri dahil et`,includeBetaUpdatesDesc:`Güncellemeleri kontrol ederken beta ve önyayım sürümleri hakkında bildir`,localLogin:{disable:`Yerel kullanıcı adı/şifre ile oturum açmayı devre dışı bırak`,disableHint:`Etkinleştirildiğinde yalnızca SSO sağlayıcıları ile oturum açılabilir. LDAP etkilenmez. Bir kurtarma yolu açık tutmak için sunucuda BAMBUDDY_LOCAL_LOGIN=true ayarlayın.`},enableRetry:`Yeniden denemeyi etkinleştir`,homeAssistantDescription:`Akıllı prizleri Home Assistant üzerinden kontrol et`,environmentManagedLabel:`(Ortam Yönetiliyor)`,autoEnabledViaEnv:`Ortam değişkenleriyle otomatik etkinleştirildi`,urlFromEnvReadOnly:`Değer HA_URL ortam değişkeniyle ayarlandı (salt okunur)`,tokenFromEnvReadOnly:`Değer HA_TOKEN ortam değişkeniyle ayarlandı (salt okunur)`,mqttConnectedTo:`Bağlı`,prometheusDescription:`Yazıcı verisini Prometheus formatında sun`,noSmartPlugsTitle:`Yapılandırılmış akıllı priz yok`,noSmartPlugsDescription:`Enerji kullanımını takip etmek ve güç kontrolünü otomatikleştirmek için Tasmota tabanlı bir akıllı priz ekleyin.`,noProvidersTitle:`Yapılandırılmış sağlayıcı yok`,noProvidersDescription:`Uyarı almak için bir sağlayıcı ekleyin.`,noTemplatesAvailable:`Şablon mevcut değil. Varsayılan şablonları yüklemek için arka ucu yeniden başlatın.`,apiPermissionView:`Yazıcı durumunu ve kuyruğu görüntüle`,apiPermissionEdit:`Baskı kuyruğundan öğe ekle ve kaldır`,apiKeysEmptyTitle:`API anahtarı yok`,apiKeysEmptyDescription:`Harici servislerle entegre olmak için bir API anahtarı oluşturun.`,noUsersFound:`Kullanıcı bulunamadı`,noGroupsFound:`Grup bulunamadı`,noGroupsAvailable:`Kullanılabilir grup yok`,passwordsDoNotMatch:`Parolalar eşleşmiyor`,systemGroupWarning:`Sistem grubu adları değiştirilemez`,authDisabledTitle:`Kimlik Doğrulama Devre Dışı`,authDisabledFeature1:`Sisteme erişmek için giriş gerektir`,authDisabledFeature2:`Grup tabanlı izinlerle birden fazla kullanıcı oluştur`,authDisabledFeature3:`50'den fazla ayrıntılı izinle erişimi kontrol et`,userHasCreated:`Bu kullanıcı şunları oluşturdu:`,userItemsQuestion:`Bu öğelerle ne yapmak istersiniz?`,deleteUserConfirm:`Bu kullanıcıyı silmek istediğinizden emin misiniz?`,actionCannotBeUndone:`Bu işlem geri alınamaz.`,addFirstSmartPlug:`İlk Akıllı Prizinizi Ekleyin`,providers:`Sağlayıcılar`,log:`Günlük`,testAll:`Hepsini Test Et`,testResults:`Test Sonuçları`,testPassedCount:`{{count}} başarılı`,testFailedCount:`{{count}} başarısız`,messageTemplates:`Mesaj Şablonları`,messageTemplatesDescription:`Her olay için bildirim mesajlarını özelleştirin.`,apiKeys:`API Anahtarları`,apiKeysDescription:`Harici entegrasyonlar ve webhook'lar için API anahtarları oluşturun.`,createKey:`Anahtar Oluştur`,apiKeyCreated:`API Anahtarı Başarıyla Oluşturuldu`,apiKeyCopyWarning:`Bu anahtarı şimdi kopyalayın - bir daha gösterilmeyecek!`,useInApiBrowser:`API Tarayıcısında Kullan`,apiKeyQrButton:`QR kodu`,apiKeyQrTitle:`Yapılandırmak için tarayın`,apiKeyQrCaption:`Bu sunucuyu ve API anahtarını eklemek için mobil uygulamanızla tarayın.`,apiKeyQrWarning:`Gizli API anahtarınızı içerir — başkalarının görebileceği yerlerde paylaşmayın veya ekran görüntüsü almayın.`,createNewApiKey:`Yeni API Anahtarı Oluştur`,keyName:`Anahtar Adı`,keyNamePlaceholder:`örn., Home Assistant, OctoPrint`,readStatus:`Durumu Oku`,readStatusDescription:`Yazıcı durumunu, kuyruğu, kütüphaneyi, arşivleri ve dilimleyici pipeline'larını görüntüle`,manageQueue:`Kuyruğu Yönet`,manageQueueDescription:`Baskı kuyruğundan öğe ekle ve kaldır. "Kütüphaneyi Yönet" ile birlikte dilimleyici pipeline'ları çalıştır`,controlPrinter:`Yazıcıyı Kontrol Et`,controlPrinterDescription:`Baskıları duraklat, devam ettir ve durdur`,manageLibrary:`Kütüphaneyi Yönet`,manageLibraryDescription:`Kütüphane dosyalarını yükle, yeniden adlandır, sil ve dilimle; MakerWorld'den model içe aktar. 'Kuyruğu Yönet' ile birlikte dilimleyici pipeline'ları çalıştır`,manageInventory:`Envanteri Yönet`,manageInventoryDescription:`Makaraları ve envanter kayıtlarını oluştur, güncelle ve sil. SpoolBuddy kiosklar (NFC tarama, tartı okumaları, kiosk sistem komutları) için gereklidir.`,manageMaintenance:`Bakımı yönet`,manageMaintenanceDescription:`Tamamlanan bakımları kaydet, sayaçları sıfırla, aralıkları düzenle ve bakım türü kataloğunu yönet. Daha geniş yazıcı kontrolü vermeden "nozulu temizledim"i kaydeden Home Assistant otomasyonlarına uygundur.`,manageArchives:`Arşivleri yönet`,manageArchivesDescription:`Eski baskıların ve istatistik katkılarının kaldırılması dahil olmak üzere baskı arşivlerini düzenleyin ve silin. Baskı geçmişini budayan otomasyonlar için uygundur.`,manageProjects:`Projeleri yönet`,manageProjectsDescription:`Projeleri oluşturun, güncelleyin ve silin, ayrıca bunlara arşiv ekleyin. Baskıları projeler halinde düzenleyen otomasyonlar için uygundur.`,maintenanceBadge:`Bakım`,archivesBadge:`Arşivler`,projectsBadge:`Projeler`,libraryBadge:`Kütüphane`,inventoryBadge:`Envanter`,cloudAccess:`Bulut erişimine izin ver`,cloudAccessDescription:`Adınıza Bambu Bulut ön ayarlarını ve filamentleri okuyun. Bambu Bulut'a giriş yapmış olmanız gerekir.`,cloudBadge:`Bulut`,updateEnergyCost:`Elektrik fiyatını güncelle`,updateEnergyCostDescription:`Bu anahtarın /settings/electricity-price üzerine yeni bir kWh başına elektrik fiyatı POST etmesine izin ver. Home Assistant dinamik tarife otomasyonları (Tibber, Octopus, vb.) için kullanışlıdır. Bu, API anahtarıyla yazılabilen tek ayar alanıdır.`,energyCostBadge:`Enerji`,legacyKey:`Eski`,legacyKeyTooltip:`Kullanıcı başına sahiplikten önce oluşturuldu; bulut erişimini kullanmak için yeniden oluşturun`,unnamedKey:`Adsız Anahtar`,lastUsed:`Son kullanım`,read:`Oku`,control:`Kontrol`,createFirstKey:`İlk Anahtarınızı Oluşturun`,webhookEndpoints:`Webhook Uç Noktaları`,webhookApiKeyHint:`API anahtarınızı X-API-Key başlığında kullanın.`,webhook:{getAllStatus:`Tüm yazıcı durumlarını al`,getSpecificStatus:`Belirli yazıcı durumunu al`,addToQueue:`Baskı kuyruğuna ekle`,pausePrint:`Baskıyı duraklat`,resumePrint:`Baskıya devam et`,stopPrint:`Baskıyı durdur`},apiBrowser:`API Tarayıcısı`,apiBrowserDescription:`Mevcut tüm API uç noktalarını keşfedin ve test edin.`,apiKeyForTesting:`Test için API Anahtarı`,apiKeyPlaceholder:`Kimlik doğrulamalı uç noktaları test etmek için API anahtarınızı buraya yapıştırın...`,apiKeyHint:`Bu anahtar isteklerle birlikte X-API-Key başlığı olarak gönderilecek.`,deleteApiKeyTitle:`API Anahtarını Sil`,deleteApiKeyMessage:`Bu API anahtarını silmek istediğinizden emin misiniz? Bu anahtarı kullanan tüm entegrasyonlar çalışmayı durduracak.`,deleteKey:`Anahtarı Sil`,amsDisplayThresholds:`AMS Görüntü Eşikleri`,amsThresholdsDescription:`AMS nem ve sıcaklık göstergeleri için renk eşiklerini yapılandırın.`,humidity:`Nem`,goodGreen:`İyi (yeşil)`,fairOrange:`Orta (turuncu)`,aboveFairBad:`Orta eşiğin üstü kırmızı olarak gösterilir (kötü)`,fairAlsoDryingThreshold:`Bu eşik aynı zamanda etkinleştirildiğinde otomatik kurutmayı tetiklemek için de kullanılır`,fairBelowDryingFloor:`Otomatik kurutma bu değere ulaşamaz: bir AMS, ısıtıcısı çalışırken %{{floor}} veya daha fazlasını bildirir, bu yüzden her döngü biter ve hemen yeniden başlar. Otomatik kurutma kullanıyorsanız %{{floor}} üzerine çıkarın.`,temperature:`Sıcaklık`,goodBlue:`İyi (mavi)`,aboveFairHot:`Orta eşiğin üstü kırmızı olarak gösterilir (sıcak)`,tempAlarmThreshold:`Alarm eşiği`,tempAlarmSeparateFromBand:`Bildirimleri yalnızca alarm eşiği gönderir — İyi ve Orta yalnızca göstergeyi renklendirir. Eskisi gibi orta eşikte alarm vermek için boş bırakın.`,tempAlarmMustBePositive:`Sıfır veya daha küçük bir eşik yok sayılır — alarm orta eşiği kullanır.`,historyRetention:`Geçmiş Saklama`,keepSensorHistory:`Sensör geçmişini sakla`,historyRetentionDescription:`Daha eski nem ve sıcaklık verileri otomatik olarak silinecek`,defaultPrintOptions:`Varsayılan Baskı Seçenekleri`,defaultPrintOptionsDescription:`Yeni baskılar başlatılırken baskı seçenekleri için varsayılan değerleri ayarlayın. Bunlar baskı iletişim kutusunda baskı başına geçersiz kılınabilir.`,defaultBedLevelling:`Tabla Seviyelendirme`,defaultBedLevellingDesc:`Baskıdan önce tablayı otomatik seviyelendir`,defaultFlowCali:`Akış Kalibrasyonu`,defaultFlowCaliDesc:`Ekstrüzyon akışını kalibre et`,defaultVibrationCali:`Titreşim Kalibrasyonu`,defaultVibrationCaliDesc:`Çınlama artefaktlarını azalt`,defaultLayerInspect:`İlk Katman Denetimi`,defaultLayerInspectDesc:`İlk katmanın AI denetimi`,defaultTimelapse:`Zaman Atlamalı Video`,defaultTimelapseDesc:`Zaman atlamalı video kaydet`,defaultNozzleOffsetCali:`Nozül Ofset Kalibrasyonu`,defaultNozzleOffsetCaliDesc:`Ekstrüderler arasındaki nozül ofsetlerini kalibre et`,tempFanPresetsTitle:`Sıcaklık ve Fan Ön Ayarları`,tempFanPresetsDescription:`Yazıcı kartı sıcaklık ve fan hızı pencerelerinde gösterilen hızlı seçim değerlerini özelleştirin. Kapalı düğmesi her zaman gösterilir.`,tempFanPresetsNozzle:`Nozül sıcaklığı`,tempFanPresetsBed:`Tabla sıcaklığı`,tempFanPresetsChamber:`Hazne sıcaklığı`,tempFanPresetsFan:`Fan hızı`,tempFanPresetsReset:`Varsayılanlara sıfırla`,concurrentUploadsTitle:`Eşzamanlı Yüklemeler`,concurrentUploadsDescription:`Kuyruğun aynı anda kaç yazıcıya dosya gönderebileceği. Yazıcılar dosyaları yavaş alır (büyük bir baskı birkaç dakika sürebilir) ve her biri sırasını bekler; bu nedenle büyük bir filoda bu değeri artırmak, bir gruptaki son yazıcının kendisinden önceki tüm aktarımları beklemesini önler. Ağınız veya Bambuddy sunucunuz paralel aktarımlarda zorlanıyorsa değeri düşürün.`,concurrentUploadsLabel:`Aynı anda dosya gönderilen yazıcı sayısı`,concurrentUploadsHelp:`1, aynı anda tek yazıcıya gönderir (eski davranış). Varsayılan 4'tür.`,staggeredStart:`Kademeli Başlatma`,staggeredStartDescription:`Çoklu yazıcı toplu başlatmaları kademelendirilirken varsayılan grup boyutu ve aralığı. Baskı modalinde yığın başına geçersiz kılınabilir.`,preheatTitle:`Ön Isıtma & Heat Soak`,preheatDescription:`Kuyruktaki her baskı başlamadan önce tablayı (ve destekleniyorsa odayı) ısıtır ve sıcaklığı korur. Aktif oda ısıtıcısı olmayan yazıcılarda mühendislik filamentleri (PA, ABS) için yararlıdır — soak zamanlayıcısı çalışırken tabla, odayı radyasyonla ısıtır. Tabla hedef sıcaklığı baskı dosyasından okunur; oda davranışı yazıcı modeline bağlıdır.`,preheatEnabled:`Ön ısıtma & soak'u etkinleştir`,preheatEnabledDesc:`Kapalıyken kuyruktaki baskılar hemen başlar. Her kuyruk öğesi baskı bazında geçersiz kılabilir.`,preheatFilamentTargetsLabel:`Filament başına oda hedefi (°C)`,preheatFilamentTargetsHint:`Bambuddy yüklü AMS yuvaları arasındaki en yüksek hedefi seçer. Tüm yuvaları 0 türeten baskılar — PLA, PETG, TPU, PVA — ön ısıtmayı tamamen atlar ve hemen başlar.`,preheatFilamentTargetsReset:`Varsayılanlara sıfırla`,preheatFilamentTargetsDefaultRow:`Diğer / eşlenmemiş`,preheatMaxWait:`Maks. bekleme (saniye)`,preheatMaxWaitHelp:`Soak'a geçilmeden önce oda ısıtma aşaması için üst sınır.`,preheatSoak:`Soak (saniye)`,preheatSoakHelp:`Hedefe ulaşıldıktan veya maks. bekleme dolduktan sonra tutma süresi.`,preheatHardwareTitle:`Yazıcıya göre davranış:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E odayı M141 ile aktif ısıtır. X1C/P2S oda sıcaklığını okur ancak yalnızca tabla radyasyonu ile ısınır. P1S/P1P/A1/A1 Mini'de oda sensörü yoktur — yalnızca soak zamanlayıcısı geçerlidir.`,preheatPerItemDesc:`Bu baskı başlamadan önce tablayı ve odayı ısıtın. Varsayılan olarak Ayarlar → İş Akışı genel anahtarını kullanır.`,preheatOverride_inherit:`Devral`,preheatOverride_on:`Açık`,preheatOverride_off:`Kapalı`,calibrationMode_off:`Kapalı`,calibrationMode_on:`Açık`,calibrationMode_auto:`Otomatik`,preheatTargetOverride:`Oda hedefini geçersiz kıl (°C, boş = filament varsayılanı)`,preheatTargetOverrideHelp:`0, oda olmadan tablayı ısıtır ve bekleme süresini uygular. Boş bırakılırsa oda gerektirmeyen bir baskı ön ısıtmayı tamamen atlar.`,plateClear:`Plaka Temizleme Onayı`,requirePlateClear:`Plaka temizleme onayı gerektir`,requirePlateClearDescription:`Etkinleştirildiğinde, planlayıcı bitmiş işleri olan yazıcılarda kuyruktaki baskıları başlatmadan önce yazıcı başına plaka temizleme onayını bekler. Bunu devre dışı bırakmak ayrıca plaka durum rozetini ve yazıcı kartlarındaki "Plakayı temizlendi olarak işaretle" düğmesini gizler.`,keepBedWarm:`Baskılar arasında yatak sıcaklığını koru`,keepBedWarmDesc:`Plaka temizleme onayı beklenirken, yatağı aşağıdaki sıcak tutma sıcaklığında tutarak hazneyi sıcak tutar — veya bir sonraki baskının yatak sıcaklığı daha yüksekse onu kullanır. Yalnızca bir sonraki baskının hazne ısıtması gerektirmesi durumunda uygulanır (ASA, ABS, PA, PC vb.). Plaka temizleme onayının etkinleştirilmiş olması gerekir.`,keepWarmBedTemp:`Sıcak tutma yatak sıcaklığı (°C)`,keepWarmBedTempHelp:`Yatağın görevi hazneyi ısıtmak olduğunda kullanılır: sıcak tutma sırasında ve baskı dosyasında yatak sıcaklığı bulunmadığında ön ısıtmada. Baskı dosyasındaki daha yüksek bir sıcaklık her zaman önceliklidir.`,keepWarmMaxMinutes:`Sıcak tutmayı şu süre sonunda durdur (dakika)`,keepWarmMaxMinutesHelp:`Plaka bu süre içinde boşaltılmazsa ısıtıcılar süresiz açık kalmak yerine kapatılır.`,gcodeInjection:`G-kod Enjeksiyonu`,gcodeInjectionDescription:`Farmloop, SwapMod, AutoClear ve Printflow 3D gibi otomatik baskı sistemleri için baskıların başlangıcında ve/veya sonunda enjekte edilecek özel G-kodu yapılandırın. Parçacıklar yazıcı modeli başına yapılandırılır ve bir kuyruk öğesinde "G-kod Enjekte Et" etkinleştirildiğinde uygulanır.`,gcodeInjectionNoPrinters:`Yazıcı bulunamadı. G-kod parçacıklarını yapılandırmak için yazıcı ekleyin.`,gcodeStartLabel:`Başlangıç G-kodu`,gcodeEndLabel:`Bitiş G-kodu`,gcodeStartPlaceholder:`Baskı başlamadan önce eklenecek G-kodu...`,gcodeEndPlaceholder:`Baskı bittikten sonra eklenecek G-kodu...`,staggerGroupSize:`Grup boyutu`,staggerGroupSizeHelp:`Grup başına eş zamanlı başlatılacak yazıcılar`,staggerInterval:`Aralık (dakika)`,staggerIntervalHelp:`Her grubun başlatılması arasındaki gecikme`,queueDrying:`Kuyruk Otomatik Kurutma`,queueDryingDescription:`Kuyruktaki baskılar arasında yazıcı boştayken AMS filamentini otomatik olarak kurut. Kurutmayı tetiklemek için yukarıdaki nem eşiğini kullanır.`,queueDryingEnabled:`Otomatik kurutmayı etkinleştir`,queueDryingEnabledDescription:`Yazıcı boştayken ve nem eşiğin üzerindeyken AMS kurutmasını otomatik olarak başlat`,queueDryingBlock:`Kurutmanın tamamlanmasını bekle`,queueDryingBlockDescription:`Kurutma bitene kadar baskı kuyruğunu engelle. Kapalıyken, baskılar kurutmadan önceliklidir.`,ambientDryingEnabled:`Ortam kurutma`,ambientDryingEnabledDescription:`Kuyrukta baskı olmasa bile, nem eşiği aştığında boşta yazıcılarda filamenti otomatik olarak kurut.`,printDryingEnabled:`Baskı sırasında kurutmaya devam et`,printDryingEnabledDescription:`Desteklenen donanımda (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L güncel firmware ile) baskı sırasında otomatik kurutmanın çalışmaya devam etmesine izin verir. Makara koruması için kurutma sıcaklığı otomatik olarak boştaki ön ayarın 5°C altına sınırlandırılır.`,dryingPresets:`Kurutma Ön Ayarları`,dryingPresetsDescription:`Filament türü başına sıcaklık ve süre. AMS 2 Pro daha düşük sıcaklıklar kullanır, AMS-HT daha yüksek sıcaklıkları destekler.`,dryingFilament:`Filament`,humidityThresholds:`Nem Eşikleri`,humidityThresholdsDescription:`Otomatik kurutma ve alarmlar için filament türüne göre nem tetikleyici. Tek AMS'te karışık yükler en düşük eşiği kullanır.`,humidityThresholdCol:`Eşik`,humidityThresholdDefault:`Varsayılan (bilinmeyen türler)`,printModal:`Baskı Modali`,expandCustomMapping:`Özel eşlemeyi varsayılan olarak genişlet`,expandCustomMappingDescription:`Birden fazla yazıcıya yazdırırken, yazıcı başına AMS eşlemesini genişletilmiş olarak göster`,authentication:`Kimlik Doğrulama`,authEnabledDescription:`Örneğiniz kullanıcı kimlik doğrulamayla güvende`,authDisabledDescription:`Girişi gerektirmek ve kullanıcı erişimini yönetmek için etkinleştir`,authDisabledMessage:`Kullanıcı hesapları oluşturmak, izinleri yönetmek ve Bambuddy örneğinizi güvende tutmak için kimlik doğrulamayı etkinleştirin.`,enableAuthentication:`Kimlik Doğrulamayı Etkinleştir`,currentUser:`Mevcut Kullanıcı`,changePassword:`Parolayı Değiştir`,admin:`Yönetici`,users:`Kullanıcılar`,addUser:`Kullanıcı Ekle`,groups:`Gruplar`,addGroup:`Grup Ekle`,system:`Sistem`,noDescription:`Açıklama yok`,userCount:`{{count}} kullanıcı`,permissionCount:`{{count}} izin`,createUser:`Kullanıcı Oluştur`,username:`Kullanıcı Adı`,enterUsername:`Kullanıcı adı girin`,password:`Parola`,enterPassword:`Parola girin`,passwordRequirements:`En az 8 karakter, bir büyük harf, bir küçük harf, bir rakam ve bir özel karakter ile.`,confirmPassword:`Parolayı Onayla`,confirmPasswordPlaceholder:`Parolayı onayla`,viewReleaseOnGitHub:`Yayını GitHub'da görüntüle`,turnAllPlugsOn:`Tüm prizleri aç`,turnAllPlugsOff:`Tüm prizleri kapat`,clearNotificationLogs:`Bildirim Günlüklerini Temizle`,clearLogsMessage:`Bu, 30 günden eski tüm bildirim günlüklerini kalıcı olarak silecek. Bu işlem geri alınamaz.`,clearLogs:`Günlükleri Temizle`,resetUiPreferences:`Arayüz Tercihlerini Sıfırla`,resetUiPreferencesMessage:`Bu, tüm arayüz tercihlerini varsayılana sıfırlayacak: kenar çubuğu sırası, tema, gösterge paneli düzeni, görünüm modları ve sıralama tercihleri. Yazıcılarınız, arşivleriniz ve sunucu ayarlarınız ETKİLENMEYECEK. Sayfa temizleme sonrası yeniden yüklenecek.`,resetPreferences:`Tercihleri Sıfırla`,deleteGroupTitle:`Grubu Sil`,deleteGroupMessage:`Bu grubu silmek istediğinizden emin misiniz? Bu gruptaki kullanıcılar bu izinleri kaybedecek.`,deleteGroup:`Grubu Sil`,disableAuthenticationTitle:`Kimlik Doğrulamayı Devre Dışı Bırak`,disableAuthenticationMessage:`Kimlik doğrulamayı devre dışı bırakmak istediğinizden emin misiniz? Bu, Bambuddy örneğinizi giriş yapmadan erişilebilir hale getirecek. Tüm kullanıcılar veritabanında kalacak ancak kimlik doğrulama devre dışı bırakılacak.`,disableAuthentication:`Kimlik Doğrulamayı Devre Dışı Bırak`,configureBambuddy:`Bambuddy'yi Yapılandır`,systemDefault:`Sistem Varsayılanı`,archiveSettings:`Arşiv Ayarları`,newWindow:`Yeni Pencere`,embeddedOverlay:`Gömülü Bindirme`,preferredSlicer:`Tercih Edilen Dilimleyici`,preferredSlicerDescription:`Uygulama içi dilimleme için API yardımcı kabıyla kullanılan dilimleyici`,openInSlicerLabel:`Dilimleyicide Aç`,openInSlicerInherit:`API dilimleyicisiyle aynı`,openInSlicerDescription:`'Dilimleyicide Aç' düğmesinin kullandığı masaüstü dilimleyici. Devralmak için 'API dilimleyicisiyle aynı' bırakın veya yerel olarak kullanmak için farklı bir dilimleyici seçin.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev, birçok Bambu yazılı 3MF'nin dilimlenmesini engelleyen bilinen CLI hatalarına sahiptir — yukarı yöndeki #12426 (boyalı çok ekstrüderli dosyalarda segfault) ve #13386 (parametre aralığı katı doğrulama reddi) sorunlarına bakın. Yukarı yön düzeltmeler gelene kadar Bambu Studio önerilir.`,useSlicerApi:`Dilimleyici API kullan`,useSlicerApiDescription:`Açıkken, "Dilimle" eylemleri uygulama içi dilimleyici modalini açar ve dilimleyici-API yardımcı bileşenini çağırır. Kapalıyken (varsayılan), URI şeması üzerinden masaüstü dilimleyiciye devredilirler.`,slicerCard:`Dilimleyici`,orcaslicerApiUrl:`OrcaSlicer yardımcı bileşen URL`,bambuStudioApiUrl:`Bambu Studio yardımcı bileşen URL`,slicerStallTimeout:`Dilimleyici duraklama zaman asimi (dakika)`,slicerStallTimeoutDescription:`Sidecar bu sure boyunca ilerleme bildirmezse dilimleme iptal edilir. Ilerleme bildirmeye devam eden agir modeller ne kadar surerse sursun kesilmez. Ilerleme bildirmeyen sidecar surumleri bu degeri toplam sure siniri olarak kullanir.`,slicerApiUrlDescription:`Dilimleyici-API yardımcı bileşen konteynerinin URL'si. SLICER_API_URL / BAMBU_STUDIO_API_URL ortam değişkeni varsayılanlarını kullanmak için boş bırakın.`,externalCameras:`Harici Kameralar`,costTracking:`Maliyet Takibi`,billingEnabled:`Faturalandırmayı etkinleştir`,billingEnabledDescription:`Kullanıcılardan baskı ücreti alın ve finans özelliklerini etkinleştirin`,printerKillSwitch:`Yetkisiz baskıyı otomatik durdurma`,printerKillSwitchDescription:`Yetkilendirme olmadan başlayan baskıları hemen durdurur.`,financeBudgetReset:`Aylık finans bütçesi sıfırlama`,financeBudgetResetDay:`Sıfırlama günü`,financeBudgetResetDayHelp:`Kısa aylarda sıfırlama ayın son gününde yapılır.`,financeBudgetResetTimezone:`Sıfırlama saat dilimi`,financeBudgetResetTimezoneHelp:`Bütçe döneminin başlangıcı bu saat dilimine göre hesaplanır.`,rebuildLedger:`Cüzdan hesap defterini yeniden oluştur`,rebuildLedgerStarted:`Hesap defteri yeniden oluşturulmaya başlandı`,rebuildLedgerConfirmTitle:`Cüzdan hesap defteri yeniden oluşturulsun mu?`,rebuildLedgerConfirmMessage:`Geçmiş bakiye değerlerini onarmak için cüzdan hesap defteri yeniden oluşturulacaktır. Bunu yalnızca ne yaptığınızı biliyorsanız çalıştırın.`,rebuildLedgerInProgress:`Yeniden oluşturma başlatılıyor...`,printsOnly:`Yalnızca Baskılar`,totalConsumption:`Toplam Tüketim`,dataManagement:`Veri Yönetimi`,storageUsage:`Depolama Kullanımı`,storageUsageDescription:`Kategoriye göre veri kullanımı dökümü`,storageUsageTotal:`Toplam`,storageUsageErrors:`Hatalar`,storageUsageOtherBreakdown:`Diğer (statik varlıklar, betikler ve yapılandırma dosyaları dahil)`,storageUsageSystem:`Sistem`,storageUsageData:`Veri`,storageUsageUnavailable:`Depolama kullanım bilgisi mevcut değil`,clearNotificationLogsDescription:`30 günden eski bildirim günlüklerini sil`,resetUiPreferencesDescription:`Kenar çubuğu sırası, tema, görünüm modları ve düzen tercihlerini sıfırla. Yazıcılar, arşivler ve ayarlar etkilenmez.`,enableHomeAssistant:`Home Assistant'ı Etkinleştir`,enableMqtt:`MQTT'yi Etkinleştir`,useTls:`TLS Kullan`,enableMetricsEndpoint:`Metrikler Uç Noktasını Etkinleştir`,availableMetrics:`Kullanılabilir Metrikler`,editUser:`Kullanıcıyı Düzenle`,deleteUserTitle:`Kullanıcıyı Sil`,groupName:`Grup Adı`,leaveEmptyForAnonymous:`Anonim için boş bırakın`,leaveEmptyForNoAuth:`Kimlik doğrulama olmaması için boş bırakın`,enterNewPassword:`Yeni parola girin`,confirmNewPassword:`Yeni parolayı onayla`,enterGroupName:`Grup adını girin`,enterDescriptionOptional:`Açıklama girin (isteğe bağlı)`,enterCurrentPassword:`Mevcut parolayı girin`,enterNewPasswordMin6:`Yeni parolayı girin (en az 6 karakter)`,toast:{keyCopied:`Anahtar panoya kopyalandı`,copyFailed:`Anahtar kopyalanamadı`,keyAddedToBrowser:`Anahtar API Tarayıcısına eklendi`,clearLogsFailed:`Günlükler temizlenemedi`,uiPreferencesReset:`Arayüz tercihleri sıfırlandı. Yenileniyor...`,authDisabled:`Kimlik doğrulama başarıyla devre dışı bırakıldı`,authDisableFailed:`Kimlik doğrulama devre dışı bırakılamadı`,apiKeyCreated:`API anahtarı oluşturuldu`,apiKeyDeleted:`API anahtarı silindi`,userCreated:`Kullanıcı başarıyla oluşturuldu`,userUpdated:`Kullanıcı başarıyla güncellendi`,userDeleted:`Kullanıcı başarıyla silindi`,groupCreated:`Grup başarıyla oluşturuldu`,groupUpdated:`Grup başarıyla güncellendi`,groupDeleted:`Grup başarıyla silindi`,fillRequiredFields:`Lütfen tüm zorunlu alanları doldurun`,passwordsDoNotMatch:`Parolalar eşleşmiyor`,passwordTooShort:`Parola en az 8 karakter olmalı`,passwordNeedsUppercase:`Parola en az bir büyük harf içermeli`,passwordNeedsLowercase:`Parola en az bir küçük harf içermeli`,passwordNeedsDigit:`Parola en az bir rakam içermeli`,passwordNeedsSpecial:`Parola en az bir özel karakter içermeli`,enterGroupName:`Lütfen bir grup adı girin`,settingsSaved:`Ayarlar kaydedildi`,noPermissionUpdate:`Ayarları değiştirme izniniz yok`,cameraSettingsSaved:`Kamera ayarları kaydedildi`,enterCameraUrl:`Lütfen bir kamera URL'si girin`,passwordChanged:`Parola başarıyla değiştirildi`,connectionFailed:`Bağlantı başarısız`,testFailed:`Test başarısız`,cameraConnected:`Kamera bağlandı{{resolution}}`,cameraConnectedCoalesced:`Kamera bağlandı{{resolution}} (hâlihazırda süren bir yakalamayla paylaşıldı)`},testConnection:`Bağlantıyı Test Et`,catalog:{spoolCatalog:`Makara Kataloğu`,spoolCatalogDescription:`Marka/türe göre boş makara ağırlıkları. Makara eklerken otomatik ağırlık araması için kullanılır.`,searchCatalog:`Katalogda ara...`,addNewEntry:`Yeni Giriş Ekle`,namePlaceholder:`Ad (örn., Bambu Lab - Plastik)`,weight:`Ağırlık`,type:`Tür`,default:`Varsayılan`,custom:`Özel`,noMatch:`Aramanızla eşleşen giriş yok`,empty:`Katalogda giriş yok`,deleteEntry:`Girişi Sil`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz?`,resetCatalog:`Kataloğu Sıfırla`,resetConfirm:`Katalog varsayılana sıfırlansın mı? Bu, tüm özel girişleri kaldıracak.`,loadFailed:`Makara kataloğu yüklenemedi`,nameWeightRequired:`Ad ve ağırlık gereklidir`,entryAdded:`Giriş eklendi`,addFailed:`Giriş eklenemedi`,entryUpdated:`Giriş güncellendi`,updateFailed:`Giriş güncellenemedi`,entryDeleted:`Giriş silindi`,deleteFailed:`Giriş silinemedi`,resetSuccess:`Katalog varsayılana sıfırlandı`,resetFailed:`Katalog sıfırlanamadı`,exported:`{{count}} giriş dışa aktarıldı`,imported:`{{added}} giriş içe aktarıldı ({{skipped}} atlandı)`,importFailed:`İçe aktarma başarısız: geçersiz JSON formatı`,exportTooltip:`Kataloğu JSON'a dışa aktar`,importTooltip:`Kataloğu JSON'dan içe aktar`,resetTooltip:`Varsayılana sıfırla`,selectedCount:`{{count}} seçildi`,deleteSelected:`Seçilenleri Sil`,bulkDeleteConfirm:`{{count}} girişi silmek istediğinizden emin misiniz?`,bulkDeleted:`{{count}} giriş silindi`,bulkDeleteFailed:`Girişler silinemedi`,material:`Malzeme`,spoolWeight:`Makara Ağırlığı`,color:`Renk`,updateSpoolWeight:`Makara Ağırlığını Güncelle`,filamentUpdated:`Filament güncellendi`,filamentUpdateFailed:`Filament güncellenemedi`,filamentUpdateInvalid:`Geçersiz filament verisi`,keepExistingSpoolWeight:`Mevcut makaralar için eski ağırlığı koru`,keepExistingSpoolWeightDesc:`Bu filament türüyle önceden oluşturulmuş makaralar eski boş ağırlığı korur. Yeni makaralar güncellenmiş değeri kullanır.`,applyToAllSpools:`Tüm makaralara uygula`,applyToAllSpoolsDesc:`Bu filament türü için tüm ağırlık hesaplamaları hemen yeni boş ağırlığı kullanır.`},colorCatalog:{title:`Renk Kataloğu`,description:`Üreticiye/malzemeye göre filament renkleri. Makara eklerken otomatik renk araması için kullanılır.`,searchColors:`Renklerde ara...`,allManufacturers:`Tüm üreticiler`,addNewColor:`Yeni Renk Ekle`,manufacturer:`Üretici`,colorName:`Renk Adı`,hex:`Hex`,materialOptional:`Malzeme (isteğe bağlı)`,showing:`{{total}} renkten {{filtered}} tanesi gösteriliyor`,noMatch:`Aramanızla eşleşen renk yok`,empty:`Katalogda renk yok`,deleteColor:`Rengi Sil`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz?`,resetCatalog:`Renk Kataloğunu Sıfırla`,resetConfirm:`Katalog varsayılana sıfırlansın mı? Bu, tüm özel renkleri kaldıracak.`,sync:`Senkronize Et`,starting:`Başlatılıyor...`,syncTooltip:`FilamentColors.xyz'den senkronize et (2000+ renk, bir dakika sürebilir)`,loadFailed:`Renk kataloğu yüklenemedi`,fieldsRequired:`Üretici, renk adı ve hex renk gereklidir`,colorAdded:`Renk eklendi`,addFailed:`Renk eklenemedi`,colorUpdated:`Renk güncellendi`,updateFailed:`Renk güncellenemedi`,colorDeleted:`Renk silindi`,deleteFailed:`Renk silinemedi`,resetSuccess:`Renk kataloğu varsayılana sıfırlandı`,resetFailed:`Katalog sıfırlanamadı`,syncUpToDate:`Zaten güncel ({{count}} renk kontrol edildi)`,syncComplete:`{{added}} yeni renk eklendi ({{skipped}} zaten mevcuttu)`,syncError:`Senkronizasyon hatası`,syncFailed:`FilamentColors.xyz'den senkronize edilemedi`,exported:`{{count}} renk dışa aktarıldı`,imported:`{{added}} renk içe aktarıldı ({{skipped}} atlandı)`,importFailed:`İçe aktarma başarısız: geçersiz JSON formatı`,selectedCount:`{{count}} seçildi`,deleteSelected:`Seçilenleri Sil`,bulkDeleteConfirm:`{{count}} rengi silmek istediğinizden emin misiniz?`,bulkDeleted:`{{count}} renk silindi`,bulkDeleteFailed:`Renkler silinemedi`},dateFormat:`Tarih Formatı`,dateFormatUs:`ABD (AA/GG/YYYY)`,dateFormatEu:`AB (GG/AA/YYYY)`,dateFormatIso:`ISO (YYYY-AA-GG)`,timeFormat:`Saat Formatı`,timeFormat12:`12 saat (3:30 PM)`,timeFormat24:`24 saat (15:30)`,defaultPrinter:`Varsayılan Yazıcı`,defaultPrinterDescription:`Yüklemeler, tekrar baskılar ve diğer işlemler için bu yazıcıyı önceden seç.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Öğeleri yeniden sıralamak, görünürlüğü sıfırlamak ve özel bağlantıları yönetmek için Kenar çubuğu düzenini kullanın.`,setDefault:`Varsayılan Yap`,sidebarOrderSetDefaultHint:`Varsayılan ayarla, mevcut menü sırasını henüz özelleştirmemiş kullanıcılara uygular.`,sidebarDefaultSet:`Varsayılan menü sırası ayarlandı.`,sidebarDefaultCleared:`Varsayılan menü sırası temizlendi.`,sidebarDefaultFailed:`Varsayılan menü sırası ayarlanamadı.`,reset:`Sıfırla`,darkMode:`Koyu Mod`,lightMode:`Açık Mod`,active:`(aktif)`,background:`Arka Plan`,accent:`Vurgu`,style:`Stil`,bgNeutral:`Nötr`,bgWarm:`Sıcak`,bgCool:`Soğuk`,bgOled:`OLED Siyah`,bgSlate:`Arduvaz Mavisi`,bgForest:`Orman Yeşili`,accentGreen:`Yeşil`,accentTeal:`Camgöbeği`,accentBlue:`Mavi`,accentOrange:`Turuncu`,accentPurple:`Mor`,accentRed:`Kırmızı`,styleClassic:`Klasik`,styleGlow:`Parıltı`,styleVibrant:`Canlı`,themeToggleHint:`Kenar çubuğundaki güneş/ay simgesini kullanarak koyu ve açık mod arasında geçiş yapın.`,progressInTitle:`Sekmede baskı ilerlemesi`,progressInTitleDescription:`Tarayıcı sekmesinde etkin baskının yüzdesini ve bir ilerleme halkası gösterir.`,autoArchivePrints:`Baskıları otomatik arşivle`,autoArchiveDescription:`Baskılar tamamlandığında 3MF dosyalarını otomatik olarak kaydet`,saveThumbnailsDescription:`3MF dosyalarından önizleme görüntülerini çıkar ve kaydet`,captureFinishPhotoDescription:`Baskı tamamlandığında yazıcı kamerasından bir fotoğraf çek. Bambuddy, baskı sırasında kısa bir zaman atlamalı kayıt yapar, böylece fotoğraf tabla inmeden önceki andan alınabilir. Bu baskı için zaman atlamalı kaydı etkinleştirdiyseniz dosya saklanır, aksi takdirde fotoğraf çekildikten sonra otomatik olarak silinir.`,finishPhotoRestorePlate:`Bitiş fotoğrafı için tablayı yükselt`,finishPhotoRestorePlateDescription:`Yazıcı, baskı bittiğinde tablayı yaklaşık 100 mm aşağı indirir ve tamamlanmış baskı kameranın çerçevesinin altında kalır. Bambuddy tablayı son basılan katmanın hemen üzerine geri kaldırır, fotoğrafı çeker ve ardından tekrar indirir. Baskı yüksekliği bilinmiyorsa veya kuyrukta başka bir iş varsa atlanır.`,ffmpegNotInstalled:`ffmpeg yüklü değil`,ffmpegRequired:`Kamera yakalama ffmpeg gerektirir. <brew>brew install ffmpeg</brew> (macOS) veya <apt>apt install ffmpeg</apt> (Linux) ile yükleyin.`,camera:`Kamera`,cameraViewMode:`Kamera Görüntüleme Modu`,cameraOverlayDescription:`Kamera ana ekranda yeniden boyutlandırılabilir bir bindirmede açılır`,cameraWindowDescription:`Kamera ayrı bir tarayıcı penceresinde açılır`,externalCamerasDescription:`Yerleşik yazıcı kamerasını değiştirmek için harici kameraları yapılandırın. MJPEG akışlarını, RTSP, HTTP anlık görüntüleri ve USB kameralarını (V4L2) destekler. Etkinleştirildiğinde, harici kamera canlı görüntüleme ve bitiş fotoğrafları için kullanılır.`,cameraPlaceholderUsb:`Cihaz yolu (/dev/video0)`,cameraPlaceholderUrl:`Kamera URL'si (rtsp://... veya http://...)`,cameraTypeMjpeg:`MJPEG Akışı`,cameraTypeRtsp:`RTSP Akışı`,cameraTypeSnapshot:`HTTP Anlık Görüntü`,cameraTypeUsb:`USB Kamera (V4L2)`,cameraSnapshotUrl:`Anlık Görüntü URL (isteğe bağlı)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`Bildirim küçük resimleri, bitiş fotoğrafları, katman zaman atlamalı kareler ve plaka algılama için kullanılan tek kare URL'si. Zaman atlamalı video ve plaka algılama, her birinin kendi yazıcı başına anahtarı gerektirir — bu URL yalnızca aktif olduklarında çektikleri görüntü kaynağıdır. Yukarıdaki canlı akıştan yakalamak için boş bırakın. go2rtc (/api/frame.jpeg) ve özel anlık görüntü uç noktasına sahip IP kameraları için kullanışlıdır.`,cameraRotation:`Döndürme`,test:`Test`,connected:`Bağlı`,disconnected:`Bağlı değil`,currency:`Para Birimi`,defaultFilamentCost:`Varsayılan filament maliyeti (kg başına)`,electricityCost:`kWh başına elektrik maliyeti`,energyDisplayMode:`Enerji görüntüleme modu`,energyModePrintDescription:`Gösterge paneli, baskılar sırasında kullanılan enerji toplamını gösterir`,energyModeTotalDescription:`Gösterge paneli, akıllı prizlerden ömür boyu enerjiyi gösterir`,fileManager:`Dosya Yöneticisi`,createArchiveEntry:`Yazdırırken Arşiv Girişi Oluştur`,createArchiveEntryDescription:`Dosya Yöneticisinden yazdırırken isteğe bağlı olarak bir arşiv girişi oluştur`,lowDiskSpaceWarning:`Düşük Disk Alanı Uyarısı`,lowDiskSpaceDescription:`Boş disk alanı bu eşiğin altına düştüğünde uyarı göster`,printerFirmware:`Yazıcı Firmware`,checkFirmwareDescription:`Bambu Lab'dan yazıcı firmware güncellemelerini kontrol et`,bambuddySoftware:`Bambuddy Yazılımı`,autoCheckDescription:`Başlangıçta otomatik olarak yeni sürümleri kontrol et`,checkNow:`Şimdi kontrol et`,updateAvailableVersion:`Güncelleme mevcut: v{{version}}`,releaseNotes:`Sürüm Notları`,updateViaDocker:`Docker Compose ile güncelle:`,composeDirectory:`Compose dizini`,composeDirectoryHint:`docker-compose.yml dosyanızın bulunduğu dizin. cd eklenmemesi için boş bırakın.`,copyUpdateCommand:`Güncelleme komutunu kopyala`,updateViaHomeAssistant:`Güncellemeler Home Assistant Supervisor tarafından yönetilir. Yeni sürümü yüklemek için Home Assistant'ta Ayarlar → Eklentiler → Bambuddy'ye gidin.`,updateViaWindowsInstaller:`Windows kurulumları, kurucu yeniden çalıştırılarak güncellenir. Yeni sürümü aşağıdan indirin — verileriniz, ayarlarınız ve yazıcılarınız korunur.`,downloadWindowsInstaller:`v{{version}} için kurucuyu indir`,installUpdate:`Güncellemeyi Yükle`,latestVersionRunning:`En son sürümü çalıştırıyorsunuz`,failedToCheckUpdates:`Güncellemeler kontrol edilemedi: {{error}}`,backupRestore:`Yedekleme ve Geri Yükleme`,backupRestoreDescription:`Ayarları dışa/içe aktar ve GitHub yedeklemesini yapılandır`,goToBackup:`Yedeklemeye Git`,externalUrl:`Harici URL`,externalUrlDescription:`Bambuddy'nin erişilebildiği harici URL. Bildirim görüntüleri ve harici entegrasyonlar için kullanılır.`,bambuddyUrl:`Bambuddy URL`,externalUrlHint:`Protokol ve port dahil edin (örn., http://192.168.1.100:8000)`,ftpRetry:`FTP Yeniden Dene`,ftpRetryDescription:`Yazıcı WiFi güvenilmez olduğunda FTP işlemlerini yeniden dene. 3MF indirmelerine, baskı yüklemelerine, zaman atlamalı video indirmelerine ve firmware güncellemelerine uygulanır.`,autoRetryDescription:`Başarısız FTP işlemlerini otomatik olarak yeniden dene`,retryAttempts:`Yeniden deneme sayısı`,retryDelay:`Yeniden deneme gecikmesi`,connectionTimeout:`Bağlantı zaman aşımı`,time_one:`{{count}} kez`,time_other:`{{count}} kez`,second_one:`{{count}} saniye`,second_other:`{{count}} saniye`,nSeconds:`{{count}} saniye`,increaseForWeakWifi:`Zayıf WiFi'li yazıcılar için artırın`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`HA'nın REST API'si üzerinden akıllı prizleri kontrol etmek için Home Assistant'a bağlanın. switch, light, input_boolean ve script varlıklarını destekler.`,homeAssistantUrl:`Home Assistant URL`,longLivedAccessToken:`Uzun Ömürlü Erişim Belirteci`,haTokenHint:`HA'da belirteç oluşturun: Profil → Uzun Ömürlü Erişim Belirteçleri → Belirteç Oluştur`,connectionSuccessful:`Bağlantı Başarılı`,connectionFailed:`Bağlantı Başarısız`,haConnectionSuccess:`Home Assistant'a başarıyla bağlanıldı.`,haConnectionFailed:`Home Assistant'a bağlanılamadı.`,mqttPublishing:`MQTT Yayınlama`,mqttDescription:`Node-RED, Home Assistant ve diğer otomasyon sistemleriyle entegrasyon için BamBuddy olaylarını harici bir MQTT brokerına yayınla.`,mqttEnableDescription:`Olayları harici MQTT brokerına yayınla`,brokerHostname:`Broker ana bilgisayar adı`,port:`Port`,usernameOptional:`Kullanıcı adı (isteğe bağlı)`,passwordOptional:`Parola (isteğe bağlı)`,topicPrefix:`Konu öneki`,topicPrefixHint:`Konular: {{prefix}}/printers/<serial>/status, vb. olacak`,prometheusMetrics:`Prometheus Metrikleri`,prometheusEndpointDescription:`Prometheus/Grafana izleme için yazıcı metriklerini <code>/api/v1/metrics</code> adresinde sun.`,bearerTokenOptional:`Bearer Belirteci (isteğe bağlı)`,bearerTokenHint:`Ayarlandıysa, isteklerin <code>Authorization: Bearer <token></code> içermesi gerekir`,metricsConnectionStatus:`Bağlantı durumu`,metricsPrinterState:`Yazıcı durumu (boşta/yazdırılıyor/vb.)`,metricsPrintProgress:`Baskı ilerlemesi 0-100%`,metricsBedTemp:`Tabla sıcaklığı`,metricsNozzleTemp:`Nozul sıcaklığı`,metricsPrintsTotal:`Sonuca göre toplam baskılar`,metricsMore:`...ve daha fazlası (katmanlar, fanlar, kuyruk, filament kullanımı)`,smartPlugsDescription:`Güç kontrolünü otomatikleştirmek ve yazıcılarınız için enerji kullanımını takip etmek üzere akıllı prizleri (Tasmota veya Home Assistant) bağlayın.`,allOn:`Tümü Açık`,allOff:`Tümü Kapalı`,addSmartPlug:`Akıllı Priz Ekle`,energySummary:`Enerji Özeti`,currentPower:`Mevcut Güç`,plugsOnline:`{{reachable}}/{{total}} priz çevrimiçi`,today:`Bugün`,yesterday:`Dün`,total:`Toplam`,enablePlugsForSummary:`Enerji özetini görmek için prizleri etkinleştirin`,addNotificationProvider:`Ekle`,systemBadge:`(Sistem)`,creating:`Oluşturuluyor...`,changing:`Değiştiriliyor...`,deleteUserAndItems:`Kullanıcıyı VE öğelerini sil`,deleteUserKeepItems:`Kullanıcıyı sil, öğeleri tut (sahipsiz olur)`,ok:`Tamam`,twoFa:{totpTitle:`Doğrulayıcı Uygulama (TOTP)`,totpDesc:`Google Authenticator, Aegis veya Authy gibi bir doğrulayıcı uygulama kullanın.`,emailOtpTitle:`E-posta OTP`,emailOtpDesc:`Giriş yaptığınızda {{email}} adresine tek seferlik bir kod gönder.`,emailOtpNoEmail:`Bu yöntemi etkinleştirmek için hesabınıza bir e-posta adresi ekleyin.`,addEmailFirst:`Hesabınızın e-posta adresi yok. E-posta OTP'yi etkinleştirmeden önce bir yöneticiden eklemesini isteyin.`,setupTotp:`Doğrulayıcı Uygulamayı Ayarla`,setupAuthApp:`Doğrulayıcı Uygulamayı Ayarla`,setupInstructions:`Aşağıdaki QR kodunu doğrulayıcı uygulamanızla tarayın, ardından bir kodla onaylayın.`,manualEntry:`Tarayamıyor musunuz? Bu gizli anahtarı manuel olarak girin:`,scannedContinue:`Kodu taradım — devam et`,enterCodeToConfirm:`Kurulumu onaylamak için doğrulayıcı uygulamanızdan 6 haneli kodu girin.`,activate:`Etkinleştir`,disableTotp:`Doğrulayıcıyı Devre Dışı Bırak`,disableConfirmHint:`Doğrulayıcıyı devre dışı bırakmak için geçerli bir TOTP kodu veya yedek kod girin.`,totpDisabled:`Doğrulayıcı uygulama devre dışı bırakıldı.`,emailOtpEnabled:`E-posta OTP etkinleştirildi.`,emailOtpDisabled:`E-posta OTP devre dışı bırakıldı.`,smtpRequired:`Lütfen önce SMTP ayarlarını yapılandırın ve test edin.`,invalidCode:`Geçersiz kod. Lütfen tekrar deneyin.`,enableEmailOtp:`E-posta OTP'yi Etkinleştir`,disableEmailOtp:`E-posta OTP'yi Devre Dışı Bırak`,emailSetupEnterCode:`E-posta adresinize bir doğrulama kodu gönderildi. Bu kutunun sahibi olduğunuzu onaylamak için aşağıya girin.`,verifyAndEnable:`Doğrula ve Etkinleştir`,emailDisablePasswordHint:`E-posta OTP'yi devre dışı bırakmayı onaylamak için hesap parolanızı girin.`,passwordPlaceholder:`Parolanızı girin`,backupCodesTitle:`Yedek kodlarınızı kaydedin`,backupCodesWarning:`Bu kodları güvenli bir yere kaydedin. Her kod yalnızca bir kez kullanılabilir ve tekrar gösterilmeyecektir.`,backupCodesRemaining:`{{count}} yedek kod kaldı`,savedCodes:`Kodlarımı kaydettim`,regenBackup:`Yedek Kodları Yeniden Oluştur`,regenBackupHint:`10 yeni yedek kod oluşturmak için mevcut TOTP kodunuzu girin. Mevcut tüm yedek kodlar geçersiz kılınacak.`,newBackupCodes:`Yeni yedek kodlar`,linkedAccounts:`Bağlı SSO Hesapları`,linkedAccountsDesc:`Bu harici kimlik sağlayıcıları hesabınıza bağlıdır.`,oidcUnlinked:`Hesap bağlantısı kaldırıldı.`},sessionPolicy:{title:`Oturum Politikası`,description:`Yeni kullanıcı girişleri için maksimum oturum süresi. Daha önce verilmiş belirteçler özgün son kullanma tarihlerini korur.`,preset24h:`24 saat`,preset7d:`7 gün`,preset30d:`30 gün`,customHoursLabel:`Özel oturum süresi (saat)`,hoursSuffix:`saat`,warning:`Daha uzun oturumlar otomatik oturum kapatma korumasını azaltır. Yalnızca güvenilir tek kullanıcılı dağıtımlar için önerilir.`},oidc:{title:`SSO / OIDC Sağlayıcıları`,desc:`Harici kimlik sağlayıcılar aracılığıyla tek oturum açmaya izin vermek için OpenID Connect sağlayıcılarını yapılandırın.`,addProvider:`Sağlayıcı Ekle`,newProvider:`Yeni Sağlayıcı`,empty:`Henüz yapılandırılmış OIDC sağlayıcısı yok.`,created:`Sağlayıcı oluşturuldu.`,updated:`Sağlayıcı güncellendi.`,deleted:`Sağlayıcı silindi.`,refreshIcon:`Simgeyi yenile`,removeIcon:`Simgeyi kaldır`,iconRefreshed:`Simge yenilendi.`,iconRemoved:`Simge kaldırıldı.`,iconFetchFailed:`Simge sağlayıcı URL'sinden alınamadı.`,deleteTitle:`Sağlayıcıyı Sil`,deleteMessage:`"{{name}}" silinsin mi? Tüm bağlı kullanıcı hesaplarının bağlantısı kaldırılacak.`,form:{name:`Görünen Ad`,issuerUrl:`Yayıncı URL`,clientId:`İstemci Kimliği`,clientSecret:`İstemci Gizli Anahtarı`,scopes:`Kapsamlar`,iconUrl:`Simge URL (isteğe bağlı)`,enabled:`Etkin`,autoCreate:`Kullanıcıları otomatik oluştur`,autoCreateDesc:`İlk girişte otomatik olarak yerel bir hesap oluştur.`,autoLink:`Mevcut hesapları otomatik bağla`,autoLinkDesc:`İlk girişte mevcut yerel hesapları e-posta eşleştirerek bağla.`,secretHint:`mevcut olanı korumak için boş bırakın`,secretPlaceholder:`yeni gizli anahtar`,emailClaim:`E-posta İddiası`,emailClaimDesc:`E-posta kimliği olarak kullanılan JWT iddiası. Azure Entra ID için 'preferred_username' veya 'upn' kullanın (email_verified göndermez). Yalnızca güvenilir iddia adlarını kullanın.`,emailClaimPlaceholder:`email`,emailClaimCustomClaimAutoLinkWarning:`Özel iddialar yalnızca değer kiracı tarafından yönetildiğinde otomatik bağlantı için güvenlidir (örn. Azure Entra ID upn / preferred_username). Kimlik sağlayıcınız kullanıcıların bu iddiayı kendi kendine onaylamasına izin veriyorsa otomatik bağlantıyı etkinleştirmeyin.`,requireEmailVerified:`E-posta doğrulamasını gerektir`,requireEmailVerifiedDesc:`E-posta iddiasını yalnızca sağlayıcı doğrulanmış olarak işaretlediğinde kabul et.`,requireEmailVerifiedWarning:`Uyarı: e-posta doğrulama olmadan bile kabul edilecek. Yalnızca güvenilir sağlayıcılarla kullanın.`,requireEmailVerifiedAutoLink:`Bu ayarı değiştirmek için önce otomatik bağlantıyı devre dışı bırakın.`,defaultGroup:`Varsayılan Grup`,defaultGroupDesc:`Otomatik oluşturulan kullanıcılara atanan grup. Ayarlanmazsa Viewers'a geri döner.`,defaultGroupViewersFallback:`Viewers (varsayılan)`,autologin:`Otomatik oturum açma`,autologinDesc:`Kimlik doğrulaması yapılmamış ziyaretçileri doğrudan bu sağlayıcıya yönlendir. Bu işareti yalnızca bir sağlayıcı taşıyabilir.`}},encryption:{title:`MFA Şifreleme Durumu`,enabledFromEnv:`Sabit şifreleme etkin (anahtar MFA_ENCRYPTION_KEY ortam değişkeninden)`,enabledFromFile:`Sabit şifreleme etkin (anahtar veri dizininden yüklendi)`,enabledGenerated:`Sabit şifreleme otomatik oluşturulan anahtarla etkin`,notConfigured:`Sabit şifreleme yapılandırılmamış`,notConfiguredDesc:`TOTP gizli anahtarları ve OIDC client_secrets düz metin olarak saklanır. MFA_ENCRYPTION_KEY ayarlayın veya Bambuddy'yi otomatik olarak oluşturmak için yazılabilir bir veri dizini ile yeniden başlatın.`,allEncrypted:`Tüm MFA gizli anahtarları sabit olarak şifrelenmiş durumda.`,legacyRowsLabel:`Eski düz metin satırlar`,encryptedRowsLabel:`Şifrelenmiş satırlar`,legacyRowsWarning:`{{count}} eski düz metin satır algılandı. Şifrelenmiş depolamaya geçmek için OIDC sağlayıcısını yeniden kaydedin veya kullanıcının doğrulayıcı uygulamasını yeniden kaydedin.`,backupHint:`Otomatik oluşturulan anahtar DATA_DIR/.mfa_encryption_key konumunda saklanır ve yerel yedek ZIP'lere dahil edilir. Yedeklerinizi güvende tutun veya MFA_ENCRYPTION_KEY'i açıkça ayarlayın.`,decryptionBrokenTitle:`Şifreleme anahtarı eksik`,decryptionBrokenError:`Şifreleme anahtarı artık mevcut olmadığından {{count}} şifrelenmiş kayıt şifresi çözülemiyor. Kurtarmak için önceki MFA_ENCRYPTION_KEY veya DATA_DIR/.mfa_encryption_key'i geri yükleyin.`,migrationErrorWarning:`Başlangıçta {{count}} eski satır yeniden şifrelenemedi. Sunucu günlüklerini kontrol edin ve yeniden denemek için Bambuddy'yi yeniden başlatın.`},pipelineLimits:{title:`Dilimleyici pipeline limitleri`,maxCopiesLabel:`Çalıştırma başına maksimum kopya`,maxCopiesDesc:`Bir pipeline çalıştırıldığında operatörlerin isteyebileceği kopya sayısı üst sınırı. Sunucu tarafı sert sınır 1000'dir.`},pipelines:{title:`Dilimleyici Pipeline'ları`,subtitle:`Yeniden kullanılabilir ön ayar paketleri (yazıcı + işlem + filamentler + tabla türü). Dilimleme diyalogundan bir tane kaydedin ve bir sonraki dosyaya tek tıkla uygulayın.`,loading:`Pipeline'lar yükleniyor…`,loadError:`Pipeline'lar yüklenemedi.`,confirmDelete:`Bu pipeline silinsin mi? Bu işlem geri alınamaz.`,staleWarning:`Atıfta bulunulan bir veya daha fazla ön ayar artık mevcut değil. Dilimleme diyalogundan bu pipeline'ı yeniden kaydederek düzeltin.`,empty:{title:`Henüz pipeline yok.`,howto:`Herhangi bir dosya için Dilimleme diyalogunu açın, yazıcı / işlem / filamentler / tablayı seçin, sonra "Pipeline olarak kaydet"e tıklayın. Kaydedilen pipeline'larınız burada görünecek.`},field:{name:`Pipeline adı`,description:`Açıklama`,targetPrinter:`Hedef yazıcı`,noTarget:`— Hedef yok —`,targetKind:`Hedef türü`,targetKindSpecific:`Belirli yazıcı`,targetKindClass:`Yazıcı sınıfı`,targetModelClass:`Yazıcı modeli`,fanoutStrategy:`Dağıtım stratejisi`,fanout:{max_parallel:`Maksimum paralel — eşleşen boş yazıcılara dağıt`,round_robin:`Sırayla — uygun yazıcılar arasında döndür`,fill_one_first:`Önce birini doldur — tüm kopyaları tek yazıcıya sabitle`},fanoutShort:{max_parallel:`paralel`,round_robin:`sırayla`,fill_one_first:`önce bir`}},action:{save:`Kaydet`,cancel:`İptal`,rename:`Yeniden adlandır`,delete:`Sil`},slot:{printer:`Yazıcı`,process:`İşlem`,filament:`Filament`,filamentN:`Filament {{n}}`,filamentAll:`Tüm {{n}} yuva`,bed:`Tabla`},group:{profiles:`Profiller`,filaments:`Filamentler`},searchPlaceholder:`Pipeline'larda ara…`,filterTargetType:`Hedef türüne göre filtrele`,filterTarget:`Hedefe göre filtrele`,filter:{all:`Tüm hedefler`,noTarget:`Hedef belirlenmemiş`,count:`{{shown}} / {{total}}`,noMatches:`Mevcut filtrelere uyan pipeline yok.`},toast:{saved:`Pipeline kaydedildi`,saveFailed:`Kaydetme başarısız`,deleted:`Pipeline silindi`,deleteFailed:`Silme başarısız`},noTargetHint:`Çalıştırmak için bir hedef yazıcı belirleyin`,noTargetWarning:`Bu pipeline'ı çalıştırmadan önce bir hedef yazıcı belirleyin.`,runs:{lastRun:`Son çalıştırma`,status:{queued:`kuyrukta`,slicing:`dilimleniyor`,dispatching:`gönderiliyor`,in_progress:`yazdırılıyor`,completed:`tamamlandı`,failed:`başarısız`,partial_failure:`kısmi başarısızlık`,cancelled:`iptal edildi`}}}},notification:{printStarted:{title:`Baskı Başladı`,body:`{{printer}}: {{filename}} yazdırmaya başladı`},printCompleted:{title:`Baskı Tamamlandı`,body:`{{printer}}: {{filename}} başarıyla tamamlandı`},printFailed:{title:`Baskı Başarısız`,body:`{{printer}}: {{filename}} başarısız oldu`},printStopped:{title:`Baskı Durduruldu`,body:`{{printer}}: {{filename}} durduruldu`},printProgress:{title:`Baskı İlerlemesi`,body:`{{printer}}: {{filename}} %{{percent}} tamamlandı`},printerOffline:{title:`Yazıcı Çevrimdışı`,body:`{{printer}} çevrimdışı`},printerError:{title:`Yazıcı Hatası`,body:`{{printer}}: {{error}}`},filamentLow:{title:`Az Filament`,body:`{{printer}}: Filament azalıyor`},maintenanceDue:{title:`Bakım Zamanı`,body:`{{printer}}: {{items}} dikkat gerektiriyor`}},errors:{generic:`Bir şeyler ters gitti`,networkError:`Ağ hatası. Lütfen bağlantınızı kontrol edin.`,notFound:`Bulunamadı`,unauthorized:`Yetkisiz`,serverError:`Sunucu hatası`,validationError:`Lütfen girdinizi kontrol edin`,printerConnectionFailed:`Yazıcıya bağlanılamadı`,saveFailed:`Değişiklikler kaydedilemedi`,deleteFailed:`Silme başarısız`,loadFailed:`Veri yüklenemedi`},hmsErrors:{title:`Hatalar - {{name}}`,noErrors:`Hata yok`,viewOnWiki:`Bambu Lab Wiki'de görüntüle`,mqttVerifyFailedRemedy:`Yazicida Gelistirici Modunu etkinlestirin, yaziciyi yeniden baslatin ve isi tekrar baslatin.`,unknownCode:`Bilinmeyen HMS kodu — ayrıntılar için Bambu Lab wiki sayfasına bakın.`,clearInstructions:`Buradan kapatmak için yazıcıdaki hataları temizleyin.`,clearErrors:`Hataları Temizle`,clearSuccess:`HMS hataları temizlendi`,clearFailed:`HMS hataları temizlenemedi`,actionSuccess:`Eylem yazıcıya gönderildi`,actionFailed:`Eylem gönderilemedi`,runoutExpectedSlot:`{{ranOut}} slotundaki filament bitti. Yazıcı şimdi {{expected}} slotunda uyumlu filament bekliyor. {{expected}} slotuna bir makara takın ve ardından Yeniden Dene'yi seçin.`,runoutExpectedSlotOnly:`Yazıcı {{expected}} slotunda uyumlu filament bekliyor. Oraya bir makara takın ve ardından Yeniden Dene'yi seçin.`,runoutSlotUnknown:`Filament bitti ve baskı duraklatıldı. Bambuddy yazıcının şu anda hangi slotu beklediğini belirleyemedi — istenen slot için yazıcının ekranını kontrol edin.`,actions:{RESUME_PRINTING:`Baskıyı sürdür`,RESUME_PRINTING_DEFECTS:`Sürdür (kusurlar kabul edilebilir)`,RESUME_PRINTING_PROBELM_SOLVED:`Sürdür (sorun çözüldü)`,STOP_PRINTING:`Baskıyı durdur`,CHECK_ASSISTANT:`Asistanı aç`,FILAMENT_EXTRUDED:`Filament ekstrude edildi, devam et`,RETRY_FILAMENT_EXTRUDED:`Henüz ekstrude edilmedi, tekrar dene`,CONTINUE:`Tamamlandı, devam et`,LOAD_VIRTUAL_TRAY:`Filament yükle`,OK_BUTTON:`Tamam`,FILAMENT_LOAD_RESUME:`Filament yüklendi, sürdür`,JUMP_TO_LIVEVIEW:`Canlı görünümü aç`,NO_REMINDER_NEXT_TIME:`Bir daha hatırlatma`,REFRESH_NOZZLE:`Tekrar kontrol et`,IGNORE_NO_REMINDER_NEXT_TIME:`Yok say ve bir daha hatırlatma`,IGNORE_RESUME:`Yok say ve sürdür`,PROBLEM_SOLVED_RESUME:`Sorun çözüldü, sürdür`,TURN_OFF_FIRE_ALARM:`Anlaşıldı, yangın alarmını kapat`,RETRY_PROBLEM_SOLVED:`Tekrar dene (sorun çözüldü)`,CANCLE:`İptal`,STOP_DRYING:`Kurutmayı durdur`,PROCEED:`Devam et`,OK_JUMP_RACK:`Tamam`,ABORT:`İptal`,DISABLE_PURIFICATION:`Bu baskı için arıtmayı devre dışı bırak`,DONT_REMIND_NEXT_TIME:`Beni hatırlatma`,DBL_CHECK_CANCEL:`İptal`,DBL_CHECK_DONE:`Tamam`,DBL_CHECK_RETRY:`Tekrar dene`,DBL_CHECK_RESUME:`Sürdür`,DBL_CHECK_OK:`Onayla`,REMOVE_CLOSE_BTN:`Kapat`}},mqttDebug:{title:`MQTT Hata Ayıklama Günlüğü`,searchPlaceholder:`Konu veya yük ara...`,noMessages:`Henüz mesaj kaydedilmedi`,startLoggingHint:`MQTT mesajlarını yakalamaya başlamak için "Kaydetmeye Başla"ya tıklayın`,noMessagesMatch:`Filtrenizle eşleşen mesaj yok`,adjustFilterHint:`Arama veya filtre kriterlerinizi ayarlamayı deneyin`,incoming:`Gelen`,outgoing:`Giden`,loggingStopped:`Kaydetme durduruldu`,loggingActive:`Kaydetme aktif - mesajlar otomatik olarak yenilenecek`,startLogging:`Kaydetmeye Başla`,stopLogging:`Kaydetmeyi Durdur`,clearLog:`Günlüğü Temizle`,topic:`Konu`,timestamp:`Zaman damgası`,direction:`Yön`,all:`Tümü`},printerFiles:{zipStarted_one:`{{count}} dosya için ZIP indirmesi başlatıldı`,zipStarted_other:`{{count}} dosya için ZIP indirmesi başlatıldı`,zipPartial:`{{total}} dosyanın {{successful}} tanesiyle ZIP indirmesi başlatıldı; kalan dosyalar alınamadı`,downloadFailed:`İndirme başarısız: {{error}}`,unknownError:`Bilinmeyen hata`,shiftSelectHint:`Bir aralık seçmek için Shift tuşuyla tıklayın`,selectFile:`{{name}} öğesini seç`,deselectFile:`{{name}} seçimini kaldır`,title:`Dosya Yöneticisi`,storageUsed:`Kullanılan:`,storageFree:`Boş:`,filterPlaceholder:`Dosyaları filtrele...`,deleteButton:`Sil`,deleteFiles:`{{count}} Dosya Sil`,deleteFileConfirm:`"{{name}}" silinsin mi? Bu geri alınamaz.`,deleteFilesConfirm:`Seçilen {{count}} dosya silinsin mi? Bu geri alınamaz.`,noFiles:`Yazıcıda dosya yok`,printerUnavailable:`Yazıcı dosya hizmeti kullanılamıyor. Yazıcıya erişilebildiğinde tekrar deneyin.`,loadingFiles:`Dosyalar yükleniyor...`,failedToLoad:`Dosyalar yüklenemedi`,toast:{filesDeleted:`{{count}} dosya silindi`,deleteFailed:`Silme başarısız: {{error}}`}},confirm:{delete:`Bunu silmek istediğinizden emin misiniz?`,unsavedChanges:`Kaydedilmemiş değişiklikleriniz var. Çıkmak istediğinizden emin misiniz?`,clearQueue:`Kuyruğu temizlemek istediğinizden emin misiniz?`},login:{title:`Bambuddy Giriş`,subtitle:`Hesabınıza giriş yapın`,username:`Kullanıcı Adı`,usernamePlaceholder:`Kullanıcı adınızı girin`,usernameOrEmail:`Kullanıcı Adı veya E-posta`,usernameOrEmailPlaceholder:`Kullanıcı adı veya @ E-posta`,password:`Parola`,passwordPlaceholder:`Parolanızı girin`,signIn:`Giriş yap`,signingIn:`Giriş yapılıyor...`,rememberMe:`Beni Hatırla`,forgotPassword:`Parolanızı mı unuttunuz?`,autologinFailed:`Otomatik SSO girişi başarısız oldu. Devam etmek için aşağıdan bir sağlayıcı seçin.`,localDisabledNotice:`Yerel oturum açma devre dışı. Aşağıdaki SSO sağlayıcılarından birini kullanın.`,loginSuccess:`Başarıyla giriş yapıldı`,loginFailed:`Giriş başarısız`,enterCredentials:`Lütfen kullanıcı adı ve parola girin`,enterEmail:`Lütfen e-posta adresinizi girin`,oidcLoginFailed:`OIDC girişi başarısız`,oidcErrors:{providerError:`Kimlik sağlayıcısı bir hata döndürdü`,missingParameters:`OIDC geri arama gerekli parametreleri eksik`,invalidState:`OIDC durumu geçersiz veya zaten kullanılmış`,stateExpired:`OIDC giriş oturumu süresi doldu — lütfen tekrar deneyin`,providerNotFound:`OIDC sağlayıcısı bulunamadı`,discoveryFailed:`OIDC keşif belgesi alınamadı`,invalidDiscovery:`OIDC keşif belgesi geçersiz`,networkError:`OIDC belirteç değişimi sırasında ağ hatası`,badResponse:`OIDC belirteç değişimi sırasında beklenmeyen yanıt`,noIdToken:`OIDC sağlayıcısı bir ID belirteci döndürmedi`,validationFailed:`OIDC belirteç doğrulaması başarısız`,nonceMismatch:`OIDC nonce uyuşmazlığı — olası tekrar saldırısı`,missingSubClaim:`OIDC belirteci sub iddiasını içermiyor`,noLinkedAccount:`Bu OIDC kimliğine bağlı yerel hesap yok`,accountInactive:`Hesabınız aktif değil`,userResolutionFailed:`Hesabınız çözümlenemedi`,internalError:`OIDC girişi sırasında dahili bir hata oluştu`,tokenExchangeFailed:`OIDC belirteç değişimi başarısız`},forgotPasswordTitle:`Parolayı Unuttum`,forgotPasswordMessage:`Parolanızı unuttuysanız, sıfırlamak için lütfen sistem yöneticinizle iletişime geçin.`,forgotPasswordEmailMessage:`E-posta adresinizi girin, size yeni bir parola göndereceğiz.`,emailAddress:`E-posta Adresi`,emailPlaceholder:`eposta.adresi@example.com`,cancel:`İptal`,sending:`Gönderiliyor...`,sendResetEmail:`Sıfırlama E-postası Gönder`,howToReset:`Parolanızı nasıl sıfırlarsınız:`,resetStep1:`Bambuddy yöneticinizle iletişime geçin`,resetStep2:`Kullanıcı Yönetiminde parolanızı sıfırlamasını isteyin`,resetStep3:`Sizin için yeni bir geçici parola belirleyebilirler`,resetStep4:`Yeni parolayla giriş yapın ve Ayarlarda değiştirin`,gotIt:`Anladım`,resetPassword:{title:`Yeni Parola Belirle`,subtitle:`Aşağıya yeni parolanızı girin ve onaylayın.`,newPassword:`Yeni Parola`,newPasswordPlaceholder:`En az 8 karakter`,confirmPassword:`Parolayı Onayla`,confirmPasswordPlaceholder:`Yeni parolayı tekrarlayın`,saving:`Kaydediliyor…`,submit:`Yeni Parola Belirle`,backToLogin:`Girişe dön`,passwordsDoNotMatch:`Parolalar eşleşmiyor`,passwordTooShort:`Parola en az 8 karakter olmalı`,resetFailed:`Parola sıfırlama başarısız. Bağlantının süresi dolmuş olabilir.`},twoFA:{title:`İki Faktörlü Kimlik Doğrulama`,subtitle:`Hesabınız 2FA ile korunuyor. Aşağıya doğrulama kodunu girin.`,methodAuthenticator:`Doğrulayıcı Uygulama`,methodEmail:`E-posta Kodu`,methodBackup:`Yedek Kod`,instructionsTotp:`Doğrulayıcı uygulamanızı açın ve Bambuddy için 6 haneli kodu girin.`,instructionsEmail:`E-posta adresinize 6 haneli bir kod gönderildi. 10 dakika içinde sona erer.`,instructionsEmailNotSent:`E-posta yoluyla bir doğrulama kodu almak için aşağıdaki düğmeye tıklayın.`,instructionsBackup:`8 karakterlik yedek kurtarma kodlarınızdan birini girin. Her kod yalnızca bir kez kullanılabilir.`,sendCodeButton:`E-posta ile Kod Gönder`,sendingCode:`Gönderiliyor...`,resendCode:`Kodu yeniden gönder`,codeLabel:`Doğrulama Kodu`,backupCodeLabel:`Yedek Kod`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Doğrula`,verifyingButton:`Doğrulanıyor...`,backToLogin:`← Girişe dön`,orContinueWith:`veya şununla devam edin`,signInWith:`{{provider}} ile giriş yap`,enterCode:`Lütfen doğrulama kodunu girin`,sendCodeFailed:`Doğrulama kodu gönderilemedi`,invalidCode:`Geçersiz kod. Lütfen tekrar deneyin.`}},setup:{title:`Bambuddy Kurulumu`,subtitle:`Bambuddy örneğiniz için kimlik doğrulamayı yapılandırın`,enableAuth:`Kimlik Doğrulamayı Etkinleştir`,adminAccount:`Yönetici Hesabı`,adminAccountDesc:`Yönetici kullanıcılar zaten varsa, kimlik doğrulama mevcut yönetici hesapları kullanılarak etkinleştirilecek. Mevcut yöneticileri kullanmak için aşağıdaki alanları boş bırakın veya yeni bir yönetici kullanıcı oluşturmak için yeni kimlik bilgileri girin.`,adminUsername:`Yönetici Kullanıcı Adı`,adminPassword:`Yönetici Parolası`,optionalIfAdminExists:`(yönetici kullanıcılar varsa isteğe bağlı)`,adminUsernamePlaceholder:`Yönetici kullanıcı adı girin (isteğe bağlı)`,adminPasswordPlaceholder:`Yönetici parolası girin (isteğe bağlı)`,confirmPassword:`Parolayı Onayla`,confirmPasswordPlaceholder:`Yönetici parolasını onayla`,settingUp:`Kuruluyor...`,completeSetup:`Kurulumu Tamamla`,toast:{authEnabledAdminCreated:`Kimlik doğrulama etkinleştirildi ve yönetici kullanıcı oluşturuldu`,authEnabledExistingAdmins:`Mevcut yönetici kullanıcılar kullanılarak kimlik doğrulama etkinleştirildi`,setupCompleted:`Kurulum tamamlandı`,enterBothCredentials:`Lütfen hem yönetici kullanıcı adı hem de parola girin veya mevcut yönetici kullanıcıları kullanmak için her ikisini de boş bırakın`,passwordsDoNotMatch:`Parolalar eşleşmiyor`,passwordTooShort:`Parola en az 6 karakter olmalı`}},changePassword:{title:`Parolayı Değiştir`,currentPassword:`Mevcut Parola`,currentPasswordPlaceholder:`Mevcut parolayı girin`,newPassword:`Yeni Parola`,newPasswordPlaceholder:`Yeni parolayı girin (en az 6 karakter)`,confirmPassword:`Yeni Parolayı Onayla`,confirmPasswordPlaceholder:`Yeni parolayı onayla`,passwordsDoNotMatch:`Parolalar eşleşmiyor`,passwordTooShort:`Parola en az 6 karakter olmalı`,changing:`Değiştiriliyor...`,success:`Parola başarıyla değiştirildi`,failed:`Parola değiştirilemedi`},plateAlert:{title:`Baskı Duraklatıldı!`,message:`Baskı plakasında nesneler algılandı. Baskı otomatik olarak duraklatıldı. Lütfen plakayı temizleyin ve baskıya devam edin.`,understand:`Anladım`},camera:{title:`Kamera Görünümü`,invalidPrinterId:`Geçersiz yazıcı ID'si`,live:`Canlı`,snapshot:`Anlık Görüntü`,restartStream:`Akışı yeniden başlat`,refreshSnapshot:`Anlık görüntüyü yenile`,fullscreen:`Tam ekran`,exitFullscreen:`Tam ekrandan çık`,connectingToCamera:`Kameraya bağlanılıyor...`,capturingSnapshot:`Anlık görüntü yakalanıyor...`,connectionLost:`Bağlantı kesildi`,connectionFailed:`Kamera bağlantısı başarısız`,reconnecting:`{{countdown}}sn içinde yeniden bağlanılıyor... (deneme {{attempt}}/{{max}})`,reconnectNow:`Şimdi yeniden bağlan`,cameraUnavailable:`Kamera kullanılamıyor`,cameraUnavailableDesc:`Yazıcının açık ve bağlı olduğundan emin olun.`,noCamera:`Kamera yok`,retry:`Yeniden dene`,cameraStream:`Kamera akışı`,zoomOut:`Uzaklaştır`,zoomIn:`Yakınlaştır`,resetZoom:`Yakınlaştırmayı sıfırla`,recording:`Kaydediyor`,startRecording:`Kaydı Başlat`,stopRecording:`Kaydı Durdur`,chamberLight:`Hazne ışığını aç/kapat`,unavailable:`Kamera kullanılamıyor`,diagnose:{button:`Tanıla`,modalTitle:`Kamera tanılaması`,running:`Tanılama çalışıyor...`,runFailed:`Tanılama çalıştırılamadı: {{error}}`,retry:`Tekrar çalıştır`,stage:{tcp_reachable:`Ağ erişilebilirliği`,first_frame:`Kare yakalama`,live_stream_active:`Canlı akış aktif`},summary:{all_ok:`Kamera çalışıyor. Tanılama tüm aşamaları başarıyla tamamladı.`,live_stream_active_healthy:`Kamera şu anda son karelerle akış yapıyor — teste gerek yok.`,printer_unreachable:`Yazıcıya erişilemiyor. IP adresini, ağ bağlantısını ve yazıcının açık olduğunu kontrol edin.`,camera_port_closed:`Yazıcıya erişilebilir ancak kamera portu kapalı. Yazıcı ayarlarında yalnızca LAN modunun ve Geliştirici Modunun etkin olduğundan emin olun.`,no_frame:`Kameraya bağlanıldı ancak hiç kare alınmadı. Tekrar deneyin veya yazıcı ayarlarında kameranın etkin olduğunu kontrol edin.`,unknown_failure:`Kamera tanılaması bilinmeyen bir nedenle başarısız oldu. Ayrıntılar için destek günlüğüne bakın.`},meta:{protocol:`Protokol`,port:`Port`,profile:`Profil`}}},groups:{title:`Grup Yönetimi`,subtitle:`Erişim kontrolü için izin gruplarını yönetin`,backToSettings:`Ayarlara Dön`,createGroup:`Grup Oluştur`,noPermission:`Bu sayfaya erişim izniniz yok.`,system:`Sistem`,noDescription:`Açıklama yok`,usersCount:`{{count}} kullanıcı`,permissionsCount:`{{count}} izin`,edit:`Düzenle`,delete:`Sil`,toast:{created:`Grup başarıyla oluşturuldu`,updated:`Grup başarıyla güncellendi`,deleted:`Grup başarıyla silindi`,enterGroupName:`Lütfen bir grup adı girin`},modal:{editGroup:`Grubu Düzenle`,createGroup:`Grup Oluştur`,cancel:`İptal`,saving:`Kaydediliyor...`,creating:`Oluşturuluyor...`,saveChanges:`Değişiklikleri Kaydet`},form:{groupName:`Grup Adı`,groupNamePlaceholder:`Grup adını girin`,systemGroupWarning:`Sistem grubu adları değiştirilemez`,description:`Açıklama`,descriptionPlaceholder:`Açıklama girin (isteğe bağlı)`,permissions:`İzinler ({{count}} seçildi)`},deleteModal:{title:`Grubu Sil`,message:`Bu grubu silmek istediğinizden emin misiniz? Bu gruptaki kullanıcılar bu izinleri kaybedecek.`,confirm:`Grubu Sil`},editor:{title:`Grubu Düzenle`,createTitle:`Grup Oluştur`,search:`İzinlerde ara...`,selectAll:`Tümünü Seç`,clearAll:`Tümünü Temizle`,permissionsSelected:`{{count}} seçildi`,noResults:`Aramanızla eşleşen izin yok`,websocketHint:`Canlı güncellemeler için gereklidir. Bu izin olmadan arayüz düzenli yoklamaya geri döner.`}},users:{title:`Kullanıcı Yönetimi`,subtitle:`Kullanıcıları ve Bambuddy örneğinize erişimlerini yönetin`,backToSettings:`Ayarlara Dön`,createUser:`Kullanıcı Oluştur`,noPermission:`Bu sayfaya erişim izniniz yok.`,admin:`Yönetici`,noGroups:`Grup yok`,active:`Aktif`,inactive:`Pasif`,edit:`Düzenle`,delete:`Sil`,system:`Sistem`,noGroupsAvailable:`Kullanılabilir grup yok`,table:{username:`Kullanıcı Adı`,groups:`Gruplar`,status:`Durum`,actions:`İşlemler`},toast:{created:`Kullanıcı başarıyla oluşturuldu`,updated:`Kullanıcı başarıyla güncellendi`,deleted:`Kullanıcı başarıyla silindi`,fillRequired:`Lütfen tüm zorunlu alanları doldurun`,passwordsDoNotMatch:`Parolalar eşleşmiyor`,passwordTooShort:`Parola en az 6 karakter olmalı`,ldapProvisioned:`"{{username}}" LDAP kullanıcısı tedarik edildi`},modal:{createUser:`Kullanıcı Oluştur`,editUser:`Kullanıcıyı Düzenle`,cancel:`İptal`,creating:`Oluşturuluyor...`,saving:`Kaydediliyor...`,saveChanges:`Değişiklikleri Kaydet`,advancedAuthSubtitle:`Gelişmiş Kimlik Doğrulama ile`,tabsAriaLabel:`Kullanıcı kaynağı`,localTab:`Yerel`,ldapTab:`LDAP`,ldapSearchLabel:`Dizinde ara`,ldapSearchPlaceholder:`Bir kullanıcı adı, isim veya e-posta yazın...`,ldapMinChars:`Aramak için en az 2 karakter yazın`,ldapTypeToSearch:`LDAP dizininde aramak için yazmaya başlayın`,ldapSearching:`Dizinde aranıyor...`,ldapNoResults:`Dizinde eşleşen kullanıcı yok`,ldapSearchError:`Dizin araması başarısız. LDAP sunucu durumunu kontrol edin.`,ldapAlreadyProvisioned:`Zaten tedarik edildi`,ldapSelectedLabel:`Seçildi`,ldapProvision:`Kullanıcıyı tedarik et`,ldapProvisioning:`Tedarik ediliyor...`,ldapErrorProvision:`Tedarik başarısız. LDAP sunucu durumunu kontrol edin ve tekrar deneyin.`},form:{username:`Kullanıcı Adı`,usernamePlaceholder:`Kullanıcı adını girin`,email:`E-posta`,emailPlaceholder:`kullanici@example.com`,password:`Parola`,passwordPlaceholder:`Parolayı girin`,confirmPassword:`Parolayı Onayla`,confirmPasswordPlaceholder:`Parolayı onayla`,newPasswordPlaceholder:`Yeni parolayı girin`,confirmNewPasswordPlaceholder:`Yeni parolayı onayla`,leaveBlankToKeep:`mevcut olanı korumak için boş bırakın`,groups:`Gruplar`,optional:`isteğe bağlı`,autoGeneratedPassword:`Güvenli bir parola otomatik olarak oluşturulacak ve kullanıcıya e-posta ile gönderilecek.`,passwordManagedByAdvancedAuth:`Parola Gelişmiş Kimlik Doğrulama tarafından yönetilir. Kullanıcıya e-posta yoluyla yeni bir parola göndermek için "Parolayı Sıfırla"yı kullanın.`,resetPassword:`Parolayı Sıfırla`,resettingPassword:`Parola Sıfırlanıyor...`},deleteModal:{title:`Kullanıcıyı Sil`,message:`Bu kullanıcıyı silmek istediğinizden emin misiniz? Bu işlem geri alınamaz.`,confirm:`Kullanıcıyı Sil`}},streamOverlay:{title:`Akış Bindirmesi`,invalidPrinterId:`Geçersiz yazıcı ID'si`,cameraStream:`Kamera akışı`,progress:`İlerleme`,eta:`ETA`,printerIdle:`Yazıcı boşta`,printerOffline:`Yazıcı çevrimdışı`,builder:{title:`Yayın Kaplaması`,description:`Yayın kaplaması için URL oluşturur: tam ekran kamera görüntüsünün üzerine canlı baskı bilgileri bindirilir; OBS, duvar ekranı veya herhangi bir tarayıcı kaynağı için. İstediğiniz alanları seçip URL'yi kopyalayın.`,printer:`Yazıcı`,size:`Yazı boyutu`,sizeSmall:`Küçük`,sizeMedium:`Orta`,sizeLarge:`Büyük`,fps:`Kare hızı`,fpsHint:`A1 ve P1 kameraları, hangi değeri isterseniz isteyin saniyede yaklaşık 5 karede kalır.`,token:`Yayın Kaplaması belirteci (isteğe bağlı)`,tokenHint:`Yalnızca oturum açma etkinken gerekir: OBS'nin kendi oturumu yoktur. Yukarıdan Yayın Kaplaması kapsamıyla bir tane oluşturun.`,tokenWarning:`Bu URL bir belirteç içerir: okuyabilen herkes yayını izleyebilir ve dosya adını görebilir. Erişimi kesmek için belirteci iptal edin.`,fields:`Gösterilecek alanlar`,fieldPrinter:`Yazıcı adı`,fieldFilename:`Dosya adı`,fieldStatus:`Durum`,fieldProgress:`İlerleme çubuğu`,fieldLayers:`Katman sayısı`,fieldEta:`Kalan süre ve tahmini bitiş`,fieldCamera:`Kamera görüntüsü`,chamberHint:`Hazne sıcaklığı yalnızca gerçek hazne sensörü olan modellerde görünür: P1 ve A1 anlamsız bir değer bildirdiği için orada gösterilmez.`,urlTitle:`Kaplama URL'si`,open:`Aç`,showPreview:`Önizlemeyi göster`,hidePreview:`Önizlemeyi gizle`,previewTitle:`Kaplama önizlemesi`},status:{printing:`Yazdırılıyor`,paused:`Duraklatıldı`,finished:`Tamamlandı`,failed:`Başarısız`,idle:`Boşta`,unknown:`Bilinmiyor`}},profiles:{title:`Profiller`,subtitle:`Dilimleyici ön ayarlarını ve basınç ilerleme kalibrasyonlarını yönetin`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Yerel Profiller`,kprofiles:`K-Profilleri`},orcaCloud:{connectedAs:`Bağlı kullanıcı`,connectedShort:`Orca Cloud'a bağlanıldı`,logout:`Bağlantıyı kes`,noLogoutPermission:`Bağlantıyı kesme izniniz yok`,noConnectPermission:`Orca Cloud'a bağlanma izniniz yok`,retry:`Yeniden dene`,connectButton:`Orca Cloud'a bağlan`,connect:{title:`Orca Cloud'a bağlan`,description:`Dilimleyici profillerinizi Bambuddy ile senkronize etmek için Orca Cloud hesabınıza giriş yapın.`},device:{title:`Orca Cloud'da Bambuddy'yi onayla`,instruction:`Orca Cloud'u açın ve bu kodu onaylayın. Onayladığınızda Bambuddy otomatik olarak bağlanır.`,codeLabel:`Eşleştirme kodunuz`,openButton:`Orca Cloud onay sayfasını aç`,manualHint:`Ya da {{url}} adresine gidin ve yukarıdaki kodu girin.`,waiting:`Onayınız bekleniyor…`,cancel:`İptal`},profiles:{title:`Orca Cloud profilleriniz ({{count}})`,refresh:`Yenile`,empty:`Orca Cloud hesabınızda henüz profil bulunamadı.`},toast:{disconnected:`Orca Cloud bağlantısı kesildi`},errors:{startFailed:`Orca Cloud giriş akışı başlatılamadı.`,denied:`Eşleştirme Orca Cloud'da reddedildi.`,expired:`Eşleştirme kodunun süresi doldu. Tekrar denemek için Bağlan'a tıklayın.`,pollFailed:`Onay beklenirken bağlantı kesildi. Lütfen tekrar deneyin.`}},localProfiles:{title:`Yerel Profiller`,subtitle:`OrcaSlicer'dan dilimleyici ön ayarlarını içe aktar ve yönet`,import:`Profilleri İçe Aktar`,importDesc:`.bbscfg, .bbsflmt, .orca_filament, .zip veya .json dosyalarını buraya bırakın`,importing:`İçe aktarılıyor...`,search:`Yerel ön ayarlarda ara...`,noPresets:`Henüz yerel ön ayar yok`,noSearchResults:`Aramanızla eşleşen ön ayar yok`,badge:`Yerel`,edit:`Düzenle`,delete:`Sil`,cancel:`İptal`,deleteConfirmTitle:`Ön Ayarı Sil`,deleteConfirm:`Bu ön ayarı silmek istediğinizden emin misiniz? Bu geri alınamaz.`,source:`Kaynak`,inheritsFrom:`Miras alır`,filamentType:`Tür`,vendor:`Satıcı`,compatiblePrinters:`Yazıcılar`,nozzleTemp:`Nozul Sıcaklığı`,cost:`Maliyet`,density:`Yoğunluk`,pressureAdvance:`Basınç İlerlemesi`,filament:`Filament`,process:`İşlem`,printer:`Yazıcı`,toast:{importSuccess:`{{count}} ön ayar içe aktarıldı`,importSkipped:`{{count}} ön ayar atlandı (yinelenenler)`,importError:`İçe aktarma sırasında {{count}} hata`,deleted:`Ön ayar silindi`,updated:`Ön ayar güncellendi`}},connectedAs:`Bağlı kullanıcı`,signInExpiredTitle:`Bambu Cloud oturumu sona erdi`,signInExpiredBody:`Bambu Lab kayıtlı belirteci artık kabul etmiyor. Bulut profillerini, MakerWorld içe aktarmalarını ve donanım yazılımı denetimlerini geri yüklemek için yeniden oturum açın.`,logout:`Çıkış`,noLogoutPermission:`Çıkış yapma izniniz yok`,failedToLoad:`Profiller yüklenemedi`,retry:`Yeniden dene`,time:{justNow:`Az önce`,minsAgo:`{{count}}dk önce`,hoursAgo:`{{count}}sa önce`,daysAgo:`{{count}}g önce`},toast:{loggedOut:`Çıkış yapıldı`},login:{title:`Bambu Cloud'a Bağlan`,subtitle:`Dilimleyici ön ayarlarınızı cihazlar arasında senkronize edin`,email:`E-posta`,password:`Parola`,region:`Bölge`,regionGlobal:`Global`,regionChina:`Çin`,verificationCode:`Doğrulama Kodu`,totpCode:`Doğrulayıcı Kodu`,checkEmail:`E-postanızı ({{email}}) 6 haneli kod için kontrol edin`,enterTotpHint:`Doğrulayıcı uygulamanızdan 6 haneli kodu girin`,accessToken:`Erişim Belirteci`,accessTokenHint:`Bambu Cloud erişim belirtecinizi yapıştırın. Çin bölgesi hesapları bu yolu kullanmalıdır (telefon bağımlı — e-posta girişi kullanılamaz). MakerWorld çerezlerinden belirteci nasıl alacağınız için wiki'ye bakın.`,back:`Geri`,loginButton:`Giriş`,verifyButton:`Doğrula`,setTokenButton:`Belirteç Ayarla`,useToken:`Erişim belirteci kullan`,captchaTitle:`Bambu Cloud CAPTCHA istiyor`,captchaBody:`Bambu, oturum açmayı kabul etmeden önce ağınızdan CAPTCHA doğrulaması istiyor ve bu doğrulama Bambuddy üzerinden yanıtlanamaz. Sorun e-postanız veya parolanız değil. Engel genel IP adresinize bağlıdır ve genellikle birkaç saat içinde kendiliğinden kalkar; sürekli yeniden denemek süreyi uzatır. Şimdi oturum açmak için tarayıcı oturumundan alınan bir erişim belirteci kullanın.`,useEmail:`E-posta ile giriş yap`,toast:{loggedIn:`Başarıyla giriş yapıldı`,codeSent:`Doğrulama kodu e-postanıza gönderildi`,enterTotp:`Doğrulayıcı uygulamanızdan kod girin`,tokenSet:`Belirteç başarıyla ayarlandı`}},presets:{myPreset:`Ön ayarım (düzenlenebilir)`,duplicate:`Çoğalt`,editable:`Düzenlenebilir`,failedToLoadDetails:`Ön ayar ayrıntıları yüklenemedi`,deleteConfirm:`Bu ön ayar silinsin mi?`,deleteWarning:`Bu, "{{name}}" ön ayarını Bambu Cloud'dan kalıcı olarak silecek. Bu geri alınamaz.`,noDuplicatePermission:`Ön ayarları çoğaltma izniniz yok`,noEditPermission:`Ön ayarları düzenleme izniniz yok`,noDeletePermission:`Ön ayarları silme izniniz yok`,types:{filament:`Filament ön ayarı`,printer:`Yazıcı ön ayarı`,process:`İşlem ön ayarı`},toast:{deleted:`Ön ayar silindi`,created:`Ön ayar oluşturuldu`,updated:`Ön ayar güncellendi`,duplicated:`Ön ayar çoğaltıldı`,fieldAdded:`"{{key}}" alanı eklendi`,exported:`Ön ayar dışa aktarıldı`},baseLabel:`Taban: {{name}}`,currentLabel:`Mevcut: {{name}}`,newPreset:`Yeni Ön Ayar`,editPreset:`Ön Ayarı Düzenle`,duplicatePreset:`Ön Ayarı Çoğalt`,createNewPreset:`Yeni Ön Ayar Oluştur`,customizeSettings:`Yeni ön ayarınız için ayarları özelleştirin`,compareWithBase:`Taban ön ayarla karşılaştır`,compare:`Karşılaştır`,basePreset:`Taban Ön Ayar`,selectBasePreset:`Taban ön ayar seç...`,presetName:`Ön Ayar Adı`,myCustomPreset:`Özel ön ayarım`,inheritsFrom:`Miras alır`,dropJsonToImport:`İçe aktarmak için JSON bırakın`,tabs:{common:`Ortak`,allFields:`Tüm Alanlar`},availableFields:`Kullanılabilir Alanlar`,searchFieldsPlaceholder:`Alanlarda ara...`,noMatchingFields:`Eşleşen alan yok`,allFieldsAdded:`Tüm alanlar eklendi`,addCustomField:`Özel alan ekle`,yourOverrides:`Geçersiz Kılmalarınız`,noOverridesYet:`Henüz geçersiz kılma yok`,clickFieldsToAdd:`Eklemek için soldaki alanlara tıklayın`,saveAsTemplate:`Şablon olarak kaydet`,jsonTip:`İpucu: Ayarları içe aktarmak için bu modalin herhangi bir yerine .json dosyasını sürükleyip bırakın`},cloudView:{searchPlaceholder:`Ön ayarlarda ara...`,templates:`Şablonlar`,refresh:`Yenile`,newPreset:`Yeni Ön Ayar`,clearFilters:`Filtreleri temizle`,compareMode:`Karşılaştırma Modu`,selectAnotherPreset:`Başka bir {{type}} ön ayarı seç`,clickTwoPresets:`Karşılaştırmak için aynı türden iki ön ayara tıklayın`,selectFirst:`1. İlkini seç`,selectSecond:`2. İkincisini seç`,compareNow:`Şimdi Karşılaştır`,lastSynced:`Son senkronizasyon:`,showingCount:`{{total}} ön ayardan {{showing}} tanesi gösteriliyor`,noPresetsFound:`Ön ayar bulunamadı`,columns:{filament:`Filament`,process:`İşlem`,printer:`Yazıcı`},noFilamentPresets:`Filament ön ayarı yok`,noProcessPresets:`İşlem ön ayarı yok`,noPrinterPresets:`Yazıcı ön ayarı yok`,filters:{type:`Tür`,owner:`Sahip`,printer:`Yazıcı`,nozzle:`Nozul`,filament:`Filament`,layer:`Katman`,all:`Tümü`,myPresets:`Ön Ayarlarım`,builtIn:`Yerleşik`,process:`İşlem`},noTemplatesPermission:`Şablonları yönetme izniniz yok`,noRefreshPermission:`Profilleri yenileme izniniz yok`,noCreatePermission:`Ön ayar oluşturma izniniz yok`},templates:{title:`Hızlı Şablonlar`,noTemplates:`Henüz şablon yok`,createFirst:`Ön ayar düzenleyicisinden şablonlar oluşturun`,typeFilter:`Tür:`,deleteTitle:`Şablonu Sil`,deleteWarning:`Bu işlem geri alınamaz`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz?`,namePlaceholder:`Şablon adı`,descriptionPlaceholder:`Açıklama`,settingsJson:`Ayarlar (JSON)`,fieldsCount:`{{count}} alan`,shownInModals:`Modallerde gösterilir`,hiddenInModals:`Modallerde gizli`,apply:`Uygula`,toast:{deleted:`Şablon silindi`,updated:`Şablon güncellendi`,created:`Şablon oluşturuldu`,applied:`Şablon uygulandı`}}},support:{debugLoggingActive:`Hata ayıklama kaydı aktif`,manageLogs:`Yönet`,collectItem7:`Yazıcı bağlantısı ve firmware sürümleri`,collectItem8:`Entegrasyon durumu (Spoolman, MQTT, HA)`,collectItem9:`Ağ arayüzleri (yalnızca alt ağlar)`,collectItem10:`Python paket sürümleri`,collectItem11:`Veritabanı sağlık kontrolleri`,collectItem12:`Docker ortam ayrıntıları`,bundleGenerating:`Paket oluşturuluyor...`,bundleStepConnection:`Yazıcı bağlantı kontrolleri çalıştırılıyor`,bundleStepVirtualPrinters:`Sanal yazıcı kurulum kontrolleri çalıştırılıyor`,bundleStepLogScan:`Son günlüklerde bilinen sorunlar taranıyor`,bundleStepBuild:`Destek paketi ZIP oluşturuluyor`},fileManager:{variants:{badge:`{{count}} sürüm`,groupAction:`Sürüm olarak grupla`,groupTooltip:`Bu dosyaları farklı yazıcılar için dilimlenmiş aynı iş olarak işaretle`,grouped:`{{count}} dosya sürüm olarak gruplandı`,printAlternatives:`Yazdır ({{count}} alternatif)`},title:`Dosya Yöneticisi`,subtitle:`Baskı dosyalarınızı organize edin ve yönetin`,uploadFiles:`Dosya Yükle`,newFolder:`Yeni Klasör`,folderName:`Klasör Adı`,folderNamePlaceholder:`örn., Fonksiyonel Parçalar`,renameFile:`Dosyayı Yeniden Adlandır`,renameFolder:`Klasörü Yeniden Adlandır`,invalidFilenameChar:`Baskı dosya adlarında "{{char}}" karakterine izin verilmiyor. Yazıcının SD kartı şu karakterleri reddeder: < > : " / \\ | ? *`,moveFiles:`{{count}} Dosyayı Taşı`,rootNoFolder:`Kök (Klasör Yok)`,current:`mevcut`,linkFolder:`Klasörü Bağla`,linkFolderDescription:`Hızlı erişim için "{{name}}" klasörünü bir projeye veya arşive bağla.`,project:`Proje`,archive:`Arşiv`,noProjectsFound:`Proje bulunamadı`,noArchivesFound:`Arşiv bulunamadı`,unlink:`Bağlantıyı Kaldır`,link:`Bağla`,dragDropFiles:`Dosyaları buraya sürükleyip bırakın`,dropFilesHere:`Dosyaları buraya bırakın`,releaseToUpload:`Yüklemek için bırakın`,orClickToBrowse:`veya göz atmak için tıklayın`,allFileTypesSupported:`Tüm dosya türleri desteklenir. ZIP dosyaları çıkarılacak.`,zipFilesDetected:`ZIP dosyaları algılandı`,zipExtractOptions:`ZIP dosyaları çıkarılacak. Klasör yapısını nasıl yöneteceğinizi seçin:`,preserveZipStructure:`ZIP'ten klasör yapısını koru`,createFolderFromZip:`ZIP dosya adından klasör oluştur`,stlThumbnailGeneration:`STL küçük resim oluşturma`,zipMayContainStl:`ZIP dosyaları STL dosyaları içerebilir. Küçük resimler çıkarma sırasında oluşturulabilir.`,thumbnailsCanBeGenerated:`STL dosyaları için küçük resimler oluşturulabilir. Büyük modellerin işlenmesi daha uzun sürebilir.`,generateThumbnailsForStl:`STL dosyaları için küçük resim oluştur`,threemfDetected:`3MF dosyaları algılandı`,threemfExtractionInfo:`Yazıcı modeli, malzeme, renk ve baskı ayarları 3MF dosyalarından otomatik olarak çıkarılacak.`,willBeExtracted:`Çıkarılacak`,filesExtracted:`{{count}} dosya çıkarıldı`,uploadComplete:`Yükleme tamamlandı: {{succeeded}} başarılı`,uploadFailed:`Yükleme başarısız`,zipFilesFailed:`{{count}} dosya başarısız`,uploading:`Yükleniyor...`,changeLink:`Bağlantıyı Değiştir...`,linkTo:`Şuna bağla...`,linkToProjectOrArchive:`Projeye veya arşive bağla`,generateThumbnail:`Küçük Resim Oluştur`,generateThumbnails:`Küçük Resimler Oluştur`,generateThumbnailsForMissing:`Eksik olan STL dosyaları için küçük resimler oluştur`,gridView:`Izgara görünümü`,listView:`Liste görünümü`,lowDiskSpaceWarning:`Düşük disk alanı uyarısı`,lowDiskSpaceDetails:`Toplam {{total}} alandan yalnızca {{free}} boş. Eşik ayarlarda {{threshold}} GB olarak ayarlanmış.`,files:`Dosyalar`,folders:`Klasörler`,size:`Boyut`,free:`Boş`,allFiles:`Tüm Dosyalar`,allExternal:`Harici`,externalIsEmpty:`Harici dosya yok`,externalEmptyDescription:`Bağlı harici klasörlerinizdeki dosyalar burada görünecek.`,wrap:`Sar`,enableTextWrapping:`Metin sarmayı etkinleştir`,disableTextWrapping:`Metin sarmayı devre dışı bırak`,collapse:`Daralt`,collapseFoldersByDefault:`Klasörleri varsayılan olarak daralt`,expandFoldersByDefault:`Klasörleri varsayılan olarak genişlet`,folderSort:`Klasörleri sırala`,folderSortByName:`Ada göre`,folderSortByActivity:`Son etkinliğe göre`,dragToResizeTooltip:`Yeniden boyutlandırmak için sürükleyin, sıfırlamak için çift tıklayın`,searchFiles:`Dosyalarda ara...`,searchSubfoldersHint:`Alt klasörler dahil`,readme:{truncated:`Kısaltıldı`,show:`README’yi göster`,hide:`README’yi gizle`,label:`README`},tags:{title:`Etiketler`,subtitle:`Çapraz filtreleme için dosyaları etiketleyin — oyuncak, çocuklar için güvenli, sadece PETG, ne isterseniz.`,manage:`Etiketler`,manageTitle:`Etiket kataloğunu yönet`,add:`Yeni etiket`,edit:`Etiketi yeniden adlandır`,name:`Ad`,fileCount:`Dosya`,empty:`Henüz etiket yok. Bir tane oluşturup dosyaları etiketlemeye başlayın.`,noMatches:`Eşleşen etiket yok.`,createPlaceholder:`örn. oyuncak, çocuk-güvenli, petg`,createButton:`Oluştur`,nameRequired:`Ad gerekli.`,searchPlaceholder:`Etiketleri filtrele...`,created:`Etiket oluşturuldu.`,updated:`Etiket yeniden adlandırıldı.`,deleted:`Etiket kaldırıldı.`,saveFailed:`Etiket kaydedilemedi.`,deleteFailed:`Etiket kaldırılamadı.`,applyFailed:`Etiketler uygulanamadı.`,applyAdd:`Etiket ekle`,applyRemove:`Etiket kaldır`,applyAddSuccess:`{{files}} dosyaya {{count}} etiket eklendi.`,applyRemoveSuccess:`{{files}} dosyadan {{count}} etiket kaldırıldı.`,actionAdd:`Seçili dosyalara ekle`,actionRemove:`Seçili dosyalardan kaldır`,tagAction:`Etiketle`,bulkTitle:`Seçili {{count}} dosyayı etiketle`,bulkTooltip:`Seçili her dosyaya etiket ekleyin veya kaldırın.`,noPermission:`Dosyaları etiketleme izniniz yok.`,filterLabel:`Filtre:`,clearAll:`Tümünü temizle`,confirmDelete:`"{{name}}" etiketi silinsin mi?`,confirmDeleteMessage:`Bu, etiketi katalogdan kaldırır. Dosyalar diğer etiketlerini korur.`,confirmDeleteInUseMessage:`Bu etiket {{count}} dosyada bulunuyor. Silmek hepsinden çıkarır; dosyaların kendisine dokunulmaz.`,editAria:`{{name}} düzenle`,deleteAria:`{{name}} sil`},allTypes:`Tüm türler`,prints:`Baskılar`,ascending:`Artan`,descending:`Azalan`,showModified:`Değiştirme tarihlerini göster`,hideModified:`Değiştirme tarihlerini gizle`,lastModified:`Son değiştirme`,lastActivity:`Son etkinlik`,resultsCount:`{{total}} dosyadan {{showing}} tanesi`,selectAll:`Tümünü Seç`,deselectAll:`Seçimi Kaldır`,selected:`{{count}} seçildi`,adding:`Ekleniyor...`,loadingFiles:`Dosyalar yükleniyor...`,folderIsEmpty:`Klasör boş`,noFilesYet:`Henüz dosya yok`,folderEmptyDescription:`Başlamak için bu klasöre dosya yükleyin veya dosyaları taşıyın.`,noFilesDescription:`Baskıyla ilgili dosyalarınızı organize etmeye başlamak için dosya yükleyin.`,noMatchingFiles:`Eşleşen dosya yok`,noMatchingFilesDescription:`Mevcut arama veya filtre kriterlerinizle eşleşen dosya yok.`,clearFilters:`Filtreleri temizle`,printedCount:`{{count}}x yazdırıldı`,uploadedBy:`Yükleyen`,deleteFolder:`Klasörü Sil`,deleteFile:`Dosyayı Sil`,deleteFilesCount:`{{count}} Dosya Sil`,deleteFolderConfirm:`Bu klasörü silmek istediğinizden emin misiniz? İçindeki tüm dosyalar da silinecek.`,deleteFileConfirm:`Bu dosyayı silmek istediğinizden emin misiniz?`,deleteFilesConfirm:`{{count}} seçili dosyayı silmek istediğinizden emin misiniz? Bu işlem geri alınamaz.`,deleting:`Siliniyor...`,noPermissionRenameFolder:`Klasörleri yeniden adlandırma izniniz yok`,noPermissionLinkFolder:`Klasörleri bağlama izniniz yok`,noPermissionDeleteFolder:`Klasörleri silme izniniz yok`,onlyEmptyFoldersDeletable:`Yalnızca boş klasörleri silebilirsiniz`,noPermissionPrint:`Yazdırma izniniz yok`,noPermissionAddToQueue:`Kuyruğa ekleme izniniz yok`,noPermissionSlice:`Dosyaları dilimleme izniniz yok`,noPermissionDownload:`Dosyaları indirme izniniz yok`,noPermissionPreview:`Dosyaları önizleme izniniz yok`,preview3d:`3B Önizleme`,noPermissionRenameFile:`Bu dosyayı yeniden adlandırma izniniz yok`,noPermissionGenerateThumbnail:`Küçük resim oluşturma izniniz yok`,noPermissionDeleteFile:`Bu dosyayı silme izniniz yok`,noPermissionCreateFolder:`Klasör oluşturma izniniz yok`,noPermissionUpload:`Dosya yükleme izniniz yok`,noPermissionMoveFiles:`Dosyaları taşıma izniniz yok`,noPermissionDeleteFiles:`Dosyaları silme izniniz yok`,linkExternal:`Harici Bağla`,linkExternalFolder:`Harici Klasör Bağla`,linkExternalFolderDescription:`Bir ana bilgisayar dizinini (NAS, USB, ağ paylaşımı) Dosya Yöneticisine bağla. Dosyalar kopyalanmaz — orijinal yoldan doğrudan erişilir.`,externalFolderNamePlaceholder:`örn., NAS Baskıları`,externalPath:`Ana Bilgisayar Yolu`,externalPathHelp:`Docker ana bilgisayarındaki dizinin mutlak yolu. Konteynere bind-mount edilmiş olmalıdır.`,readOnly:`Salt Okunur`,readOnlyHelp:`yüklemeleri ve silmeleri engeller`,showHiddenFiles:`Gizli dosyaları göster (nokta dosyaları)`,externalFolder:`Harici Klasör`,scanFolder:`Tara`,toast:{folderCreated:`Klasör oluşturuldu`,openInSlicerFailed:`Dilimleyicide açılamadı`,folderDeleted:`Klasör silindi`,fileDeleted:`Dosya silindi`,filesDeleted:`{{count}} dosya silindi`,filesMoved:`Dosyalar taşındı`,folderLinked:`Klasör bağlandı`,folderUnlinked:`Klasör bağlantısı kaldırıldı`,externalFolderLinked:`Harici klasör bağlandı ve tarandı`,folderScanned:`Tarama tamamlandı: {{added}} eklendi, {{removed}} kaldırıldı`,addedToQueue:`Kuyruğa {{count}} dosya eklendi`,addedToQueuePartial:`{{added}} dosya eklendi, {{failed}} başarısız`,failedToAddToQueue:`Dosyalar eklenemedi: {{error}}`,fileRenamed:`Dosya yeniden adlandırıldı`,folderRenamed:`Klasör yeniden adlandırıldı`,thumbnailsGenerated:`{{count}} küçük resim oluşturuldu`,thumbnailsGeneratedPartial:`{{succeeded}} küçük resim oluşturuldu, {{failed}} başarısız`,noStlMissingThumbnails:`Küçük resmi eksik STL dosyası yok`,failedToGenerateThumbnails:`Küçük resimler oluşturulamadı: {{error}}`,thumbnailGenerated:`Küçük resim oluşturuldu`,failedToGenerateThumbnail:`Küçük resim oluşturulamadı: {{error}}`}},projects:{parentLabel:`Üst proje`,parentNone:`Yok (üst düzey proje)`,parentHint:`Bu projeyi başka bir projenin altına yerleştirin, böylece rakamları ana projede toplanır`,partOf:`{{name}} projesinin parçası`,subProjectCount:`{{count}} alt proje`,subProjectsOf:`{{name}} alt projeleri`,collapseSubProjects:`Alt projeleri daralt`,expandSubProjects:`Alt projeleri genişlet`,title:`Projeler`,subtitle:`3D baskı projelerinizi organize edin ve takip edin`,newProject:`Yeni Proje`,editProject:`Projeyi Düzenle`,deleteProject:`Projeyi Sil`,projectName:`Proje Adı`,description:`Açıklama`,noProjects:`Henüz proje yok`,noProjectsFiltered:`{{status}} proje yok`,noProjectsFilteredHelp:`Hiç {{status}} projeniz yok. Projeler durumları değiştiğinde burada görünecek.`,createFirst:`İlgili baskıları organize etmeye, ilerlemeyi takip etmeye ve yapımlarınızı yönetmeye başlamak için ilk projenizi oluşturun.`,createFirstButton:`İlk Projenizi Oluşturun`,create:`Oluştur`,files:`Dosyalar`,prints:`Baskılar`,plates:`plaka`,parts:`parça`,lastModified:`Son Değiştirme`,deleteConfirm:`Bu projeyi silmek istediğinizden emin misiniz? Arşivler ve kuyruk öğelerinin bağlantısı kaldırılacak ancak silinmeyecek.`,addFiles:`Dosya Ekle`,removeFile:`Dosyayı Kaldır`,viewDetails:`Detayları Görüntüle`,namePlaceholder:`örn., Voron 2.4 Yapımı`,descriptionPlaceholder:`İsteğe bağlı açıklama...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URL http:// veya https:// ile başlamalı`,openExternalUrl:`Proje URL'sini aç`,coverImageLabel:`Kapak fotoğrafı`,coverImageAlt:`Proje kapak fotoğrafı`,coverImageUpload:`Yükle`,coverImageReplace:`Değiştir`,coverImageRemove:`Kaldır`,color:`Renk`,targetPlates:`Hedef Plakalar`,targetPlatesPlaceholder:`örn., 25`,targetPlatesHelp:`Baskı işi sayısı`,targetParts:`Hedef Parçalar`,targetPartsPlaceholder:`örn., 150`,targetPartsHelp:`Gereken toplam nesne`,targetSets:`Dosya başına kopya`,targetSetsPlaceholder:`örn. 10`,targetSetsHelp:`Her yazdırılabilir dosyanın kaç kez yazdırılacağı`,tagsLabel:`Etiketler (virgülle ayrılmış)`,tagsPlaceholder:`örn., voron, fonksiyonel, hediye`,dueDate:`Son Tarih`,priority:`Öncelik`,priorityLow:`Düşük`,priorityNormal:`Normal`,priorityHigh:`Yüksek`,priorityUrgent:`Acil`,statusActive:`Aktif`,statusCompleted:`Tamamlandı`,statusArchived:`Arşivlendi`,done:`Tamamlandı`,completed:`tamamlandı`,failed:`başarısız`,inQueue:`kuyrukta`,noPrintsYet:`Henüz baskı yok`,printJobs:`Baskı işleri (plakalar)`,partsPrinted:`Yazdırılan parçalar`,failedParts:`Başarısız parçalar`,import:`İçe Aktar`,export:`Dışa Aktar`,importProject:`Projeyi içe aktar`,exportAll:`Tüm projeleri dışa aktar`,loading:`Projeler yükleniyor...`,noEditPermission:`Projeleri düzenleme izniniz yok`,noDeletePermission:`Projeleri silme izniniz yok`,noCreatePermission:`Proje oluşturma izniniz yok`,noImportPermission:`Projeleri içe aktarma izniniz yok`,noExportPermission:`Projeleri dışa aktarma izniniz yok`,toast:{created:`Proje oluşturuldu`,updated:`Proje güncellendi`,deleted:`Proje silindi`,imported:`Proje içe aktarıldı`,multipleImported:`{{count}} proje içe aktarıldı`,importFailed:`İçe aktarma başarısız`,exported:`Projeler dışa aktarıldı (yalnızca meta veriler)`}},projectDetail:{notFound:`Proje bulunamadı`,backToProjects:`Projelere Dön`,export:`Dışa Aktar`,exportProject:`Projeyi dışa aktar`,noExportPermission:`Projeleri dışa aktarma izniniz yok`,noEditPermission:`Projeleri düzenleme izniniz yok`,partOf:`Şunun parçası:`,priorityLabel:`Öncelik:`,noPrints:`Bu projede henüz baskı yok`,status:{active:`Aktif`,completed:`Tamamlandı`,archived:`Arşivlendi`},priority:{low:`Düşük`,normal:`Normal`,high:`Yüksek`,urgent:`Acil`},dueDate:{overdue:`Gecikmiş`,today:`Bugün teslim`,daysLeft:`{{count}} gün kaldı`},progress:{platesProgress:`Plaka İlerlemesi`,partsProgress:`Parça İlerlemesi`,setsProgress:`Tamamlanan setler`,sets:`set`,setsHint:`Her yazdırılabilir dosya bu sayıya ulaştığında bir set tamamlanır`,printJobs:`baskı işi`,parts:`parça`,percentComplete:`%{{percent}} tamamlandı`,remaining:`{{count}} kaldı`},stats:{printJobs:`Baskı İşleri`,total:`toplam`,failed:`{{count}} başarısız`,partsPrinted:`{{count}} parça yazdırıldı`,printTime:`Baskı Süresi`,filamentUsed:`Kullanılan Filament`},cost:{title:`Maliyet Takibi`,filamentCost:`Filament Maliyeti`,energy:`Enerji`,totalCost:`Toplam Maliyet`,total:`Toplam`,includesBom:`BOM dahil`,budget:`Bütçe`,remaining:`Kalan`},subProjects:{title:`Alt projeler ({{count}})`,jobs:`{{count}} iş`},rollup:{title:`{{count}} alt proje dahil`,progress:`Genel ilerleme`,percentComplete:`%{{percent}} tamamlandı`},notes:{title:`Notlar`,noEditPermission:`Notları düzenleme izniniz yok`,placeholder:`Bu proje hakkında notlar ekleyin...`,empty:`Henüz not yok. Not eklemek için Düzenle'ye tıklayın.`},files:{title:`Dosyalar`,linkFolders:`Dosya Yöneticisinden klasörleri bağla`,forQuickAccess:`hızlı erişim için bu projeye.`,fileCount:`{{count}} dosya`,empty:`Bağlı klasör yok. Dosya Yöneticisine gidin ve bu projeye bir klasör bağlayın.`,printedCount:`{{count}} kez yazdırıldı`,progressTooltip:`{{target}} yazdırmadan {{done}} tanesi tamamlandı`,noFiles:`Bu klasörde dosya yok.`},bom:{title:`Malzeme Listesi`,acquired:`{{completed}}/{{total}} edinildi`,showAll:`Tümünü göster`,hideDone:`Tamamlananları gizle`,addPart:`Parça Ekle`,noAddPermission:`Parça ekleme izniniz yok`,partNamePlaceholder:`Parça adı (örn., M3x8 vidalar)`,partName:`Parça adı`,qty:`Adet`,price:`Fiyat ({{currency}})`,sourcingUrlPlaceholder:`Kaynak URL'si (isteğe bağlı)`,remarksPlaceholder:`Notlar (isteğe bağlı)`,deletePart:`Parçayı Sil`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz?`,noUpdatePermission:`Parçaları güncelleme izniniz yok`,noEditPermission:`Parçaları düzenleme izniniz yok`,noDeletePermission:`Parçaları silme izniniz yok`,totalCost:`Toplam maliyet:`,empty:`Malzeme listesinde parça yok. Nelerin tedarik edilmesi gerektiğini takip etmek için donanım, elektronik veya diğer bileşenler ekleyin.`},timeline:{title:`Etkinlik Zaman Çizelgesi`,empty:`Henüz etkinlik yok.`},template:{saveAsTemplate:`Şablon Olarak Kaydet`,noCreatePermission:`Şablon oluşturma izniniz yok`},queue:{title:`Kuyruk`,viewAll:`Tümünü görüntüle`,printing:`{{count}} yazdırılıyor`,queued:`{{count}} kuyrukta`},prints:{title:`Baskılar ({{count}})`},toast:{projectUpdated:`Proje güncellendi`,partAdded:`Parça eklendi`,partRemoved:`Parça kaldırıldı`,exportFailed:`Dışa aktarma başarısız`,projectExported:`Proje dışa aktarıldı`,templateCreated:`Şablon oluşturuldu`}},system:{title:`Sistem Bilgisi`,version:`Sürüm`,uptime:`Çalışma Süresi`,cpuUsage:`CPU Kullanımı`,memoryUsage:`Bellek Kullanımı`,diskUsage:`Disk Kullanımı`,networkInfo:`Ağ Bilgisi`,logs:`Günlükler`,debugMode:`Hata Ayıklama Modu`,enableDebug:`Hata Ayıklama Kaydını Etkinleştir`,disableDebug:`Hata Ayıklama Kaydını Devre Dışı Bırak`,downloadLogs:`Günlükleri İndir`,clearLogs:`Günlükleri Temizle`,dockerInfo:`Docker Bilgisi`,containerName:`Konteyner Adı`,imageName:`İmaj Adı`,platform:`Platform`,architecture:`Mimari`},sponsors:{sectionTitle:`Bağımsız ve topluluk destekli`,tagline:`Bambuddy ücretsizdir ve böyle kalır çünkü insanlar onu desteklemeyi seçer. VC yok, bulut bağımlılığı yok.`,viewSupporters:`Destekçileri görüntüle`,toastPrints:`Bambuddy ile {{count}} baskı tamamladın. Bambuddy, destekçileri sayesinde ücretsiz kalıyor.`,toastCost:`Bambuddy ile {{total}} kadar filament takip ettin. Projeyi bağımsız tutanları gör.`,toastArchives:`{{count}} baskı Bambuddy ile arşivlendi. Bağımsız kalmasını sağlayanları gör.`,toastAnniversary:`Bambuddy ile bir yılı doldurdun! Projeyi bağımsız tutanları gör.`,toastVersionUpdate:`v{{version}} sürümüne güncellendi. Bambuddy, destekçileri sayesinde ücretsiz kalıyor.`,toastBusiness:`Bambuddy'yi {{count}} yazıcıda mı çalıştırıyorsunuz? Ekipler için bir destek planı var: öncelikli düzeltmeler, faturalandırma ve geliştiriciye doğrudan erişim.`,businessCta:`Kurumsal Bambuddy`,businessTitle:`Kurumsal Bambuddy`,businessTagline:`{{count}} yazıcı çalıştırıyorsunuz. Ekipler ve baskı çiftlikleri için öncelikli destek, ticari lisanslama ve faturalandırma mevcut.`},library:{title:`Filament Kütüphanesi`,addFilament:`Filament Ekle`,editFilament:`Filamenti Düzenle`,deleteFilament:`Filamenti Sil`,vendor:`Satıcı`,material:`Malzeme`,color:`Renk`,kFactor:`K Faktörü`,temperature:`Sıcaklık`,noFilaments:`Kütüphanede filament yok`,deleteConfirm:`Bu filamenti silmek istediğinizden emin misiniz?`,importFromPrinter:`Yazıcıdan İçe Aktar`,exportToFile:`Dosyaya Dışa Aktar`,runWithPipeline:{actionLabel:`Pipeline ile çalıştır`,noPermission:`Pipeline çalıştırma izniniz yok`,modalTitle:`Pipeline ile çalıştır`,confirmTitle:`Çalıştırmayı onayla`,confirmIntro:`Ön kontrol bu çalıştırmayla ilgili sorunlar buldu`,sourceHint:`Kaynak`,pipelineHint:`Pipeline`,targetHint:`Hedef`,pipelineListAria:`Kullanılabilir pipeline'lar`,runAnyway:`Yine de çalıştır`,loading:`Yükleniyor…`,empty:`Henüz kayıtlı pipeline yok. Dilimleme diyalogunu açın ve oluşturmak için "Pipeline olarak kaydet"e tıklayın.`,noTarget:`Hedef yazıcı belirlenmemiş`,noTargetMessage:`Bu pipeline'ın hedef yazıcısı yok. Birini seçmek için Ayarlar'da açın.`,copies:`Kopyalar`,copiesHint:`maks {{n}}`,classTarget:`Herhangi {{model}}`,toast:{started:`Pipeline çalıştırması başladı`,failed:`Çalıştırma başlatılamadı`},issue:{printerNotSet:`Bu pipeline'da hedef yazıcı belirlenmemiş.`,printerNotFound:`Hedef yazıcı artık mevcut değil.`,printerDisabled:`Hedef yazıcı devre dışı.`,printerOffline:`Hedef yazıcı çevrimdışı.`,filamentType:`Filament yuvası {{slot}}: beklenen {{expected}}, AMS'de {{actual}}`,filamentColor:`Filament yuvası {{slot}}: renk farklı (beklenen {{expected}}, AMS'de {{actual}})`,amsSlotMissing:`AMS yuvası {{slot}} bu yazıcıda yok`,filamentUnverified:`Filament yuvası {{slot}} bulut / standart ön ayardan geldiği için statik olarak doğrulanamadı.`,noClassMatches:`Bu kurulumda pipeline'ın hedef model sınıfıyla ({{expected}}) eşleşen yazıcı yok.`,classNotSet:`Pipeline hedefi yazıcı sınıfı olarak ayarlanmış ancak model seçilmemiş.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Dilimleyici varsayılanları gösteriliyor: dilimleyici sidecar bu özellikten eski olduğu için bir ön ayarın değerlerini bildiremiyor. Görmek için sidecar imajını güncelleyin. Değiştirmediğiniz her şey yine ön ayarı kullanır.`,presetValuesNotConfigured:`Dilimleyici varsayılanları gösteriliyor: yapılandırılmış bir sidecar olmadığı için ön ayarın değerleri okunamıyor. Değiştirmediğiniz her şey yine ön ayarı kullanır.`,presetValuesSidecarUnavailable:`Dilimleyici varsayılanları gösteriliyor: sidecar yanıt vermediği için ön ayarın değerleri okunamıyor. Değiştirmediğiniz her şey yine ön ayarı kullanır.`,presetValuesUnavailable:`Dilimleyici varsayılanları gösteriliyor: seçilen ön ayarın kendi değerleri okunamadı. Değiştirmediğiniz her şey yine ön ayarı kullanır.`,filamentDefault:`Varsayılan`,fromFile:`dosyadan`,fromFileHint:`Tasarımcı bunu kaynak dosyada değiştirdi. Değeri {{value}}.`,fromFilePrinterCoupled:`tasarımcının yazıcısı`,fromFilePrinterCoupledHint:`Bu dosyanın tasarlandığı yazıcıya göre ayarlanmıştır; sizinkinde yanlış veya aralık dışı olabilir.`,fromFileOverridesPreset:`profili geçersiz kılar`,fromFileOverridesPresetHint:`Dosya bunu {{value}} olarak ayarlıyor, seçtiğiniz profil ise {{preset}} kullanıyor. Yalnızca dosya öncelikli olacaksa işaretleyin.`,useFromFile:`{{option}} için kaynak dosyadaki değeri kullan`,otherFromFile:`Bu dosyadaki diğer ayarlar`,fromFileSummary:`Tasarımcı bu dosyada {{count}} işlem ayarını değiştirmiş. Yalnızca işaretlediklerin kullanılır.`,fromFileUseAll:`Tasarımcının ayarlarını kullan`,fromFileUseAllHint:`Başka yazıcılara taşınabilen ayarları işaretler. Tasarımcının kendi yazıcısına göre ayarlananlar ve seçtiğin ön ayarı tanımlayanlar kapalı kalır.`,fromFileClear:`{{count}} ayarı temizle`,loading:`Dilimleyici ayarları yükleniyor…`,mode:{simple:`Basit`,advanced:`Gelişmiş`,expert:`Uzman`},searchPlaceholder:`Ayarlarda ara`,resetAll:`{{count}} ayarı sıfırla`,resetOption:`Varsayılana sıfırla`,noMatches:`Bu aramayla eşleşen ayar yok.`},slice:{filamentSlotUnset:`ayarlanmadı`,processSettingsEmbedded:`“Dosyanın yerleşik ayarlarını kullan” açıkken kullanılmaz — bu dilimlemeyi dosyanın kendi ayarları yönetir.`,processSettingsInactive:`Etkin değil`,presetsHidden:`{{count}} gizli`,showAllPresets:`Tümünü göster`,showFewerPresets:`Daha az göster`,processSettings:`İşlem ayarları`,processSettingsHint:`Seçilen ön ayarı bu dilimleme için düzenleyin. Dokunmadığınız her şey ön ayardaki gibi kalır.`,processSettingsChanged:`{{count}} değişti`,processSettingsUnchanged:`Ön ayar varsayılanları`,title:`Modeli dilimle`,action:`Dilimle`,actionAll:`Tüm {{count}} plakayı dilimle`,actionAllTitle:`Her plakayı tek bir çok plakalı çıktıya dilimle (tek arşiv). Filament seçimi projenin tanımladığı her yuvayı kapsar.`,allPlatesToggle:`Tüm {{count}} plakayı dilimle`,slicing:`Dilimleniyor…`,printer:`Yazıcı profili`,process:`İşlem profili`,filament:`Filament profili`,filamentSlot:`Filament {{index}} ({{type}})`,filamentColour:`Filament rengi`,selectPreset:`— Bir ön ayar seçin —`,loadingPresets:`Ön ayarlar yükleniyor…`,analyzingPlateFilaments:`Plaka filamentleri analiz ediliyor…`,analyzingPlateFilamentsHint:`Bu plakanın hangi AMS yuvalarını kullandığını keşfetmek için bir önizleme dilimleme çalıştırılıyor. Sonradan önbelleğe alınır — yeniden açma anlıktır.`,previewToast:`{{name}} analiz ediliyor — {{elapsed}}`,previewWithProgress:`{{name}} analiz ediliyor — {{stage}} (%{{percent}}) — {{elapsed}}`,notUsedByPlate:`— bu plaka tarafından kullanılmıyor`,noPresetsForSlot:`Kullanılabilir ön ayar yok`,otherPrinters:`Diğer yazıcılar`,presetsLoadFailed:`Ön ayarlar yüklenemedi. Önce içe aktarmak için Ayarlar → Profiller'i açın.`,refreshPresets:`Yenile`,refreshPresetsTitle:`Ön ayarları yenile — en güncel bulut ve paketli listeleri getir (Bambu Studio veya Bambu Handy'de bir ön ayar sildikten sonra kullanın)`,allPresetsRequired:`Tüm ön ayarlar seçilmelidir`,useEmbedded:`Dosyanın yerleşik ayarlarını kullan`,useEmbeddedHint:`Yukarıdaki profiller yerine tasarımcının ayarladığı gibi (duvarlar, dolgu, filament) dilimle. Yazıcınız dosyayla eşleştiği için sunuluyor.`,autoOrient:`Nesneleri otomatik yönlendir`,autoOrientHint:`Dilimleyici, dilimlemeden önce her nesneyi en iyi basılan yüzüne çevirir. Dosyada kayıtlı yönlendirmenin yerini alır.`,autoArrange:`Tablaya otomatik yerleştir`,autoArrangeHint:`Dilimleyici nesneleri üst üste binmeyecek şekilde yerleştirir. Dosyadaki yerleşimin yerini alır.`,enqueuing:`Dilimleme işi gönderiliyor…`,queued:`Kuyrukta…`,failed:`Dilimleme başarısız. Dilimleyici yardımcı bileşen günlüklerini kontrol edin.`,startedToast:`{{name}} arka planda dilimleniyor…`,queuedToast:`Kuyrukta: {{name}} — {{elapsed}}`,runningToast:`{{name}} dilimleniyor — {{elapsed}}`,runningWithProgress:`{{name}} — {{stage}} (%{{percent}}) — {{elapsed}}`,runningWithProgressMultiPlate:`{{plateCount}}/{{plateIndex}} plaka • {{name}} — {{stage}} (%{{percent}}) — {{elapsed}}`,completedToast:`{{name}} dilimlendi`,externalWriteFallbackToast:`Dahili kitaplığa kaydedildi: harici klasöre yazılamadı`,failedTitle:`Dilimleme başarısız`,failedToast:`{{name}} dilimleme başarısız: {{detail}}`,tier:{local:`İçe aktarılmış`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Standart`},cloud:{notAuthenticated:`Bulut ön ayarlarınızı görmek için Bambu Cloud'a giriş yapın (Ayarlar → Profiller → Bambu Cloud).`,expired:`Bambu Cloud oturumu süresi doldu — bulut ön ayarlarınızı yenilemek için tekrar giriş yapın.`,unreachable:`Bambu Cloud şu anda erişilemez. Yerel ve standart ön ayarlar hâlâ çalışıyor.`},orcaCloud:{notAuthenticated:`Orca ön ayarlarınızı görmek için Orca Cloud'a giriş yapın (Profiller → Orca Cloud).`,expired:`Orca Cloud oturumu sona erdi — Orca ön ayarlarınızı yenilemek için tekrar giriş yapın.`,unreachable:`Orca Cloud şu anda erişilemez. Diğer ön ayarlar çalışmaya devam ediyor.`},bedType:{label:`Baskı plakası`,auto:`Otomatik (işlem ön ayarı kullan)`,coolPlate:`Soğuk Plaka`,coolPlateSuperTack:`Soğuk Plaka SuperTack`,engineering:`Mühendislik Plakası`,highTemp:`Yüksek Sıcaklık Plakası`,texturedPEI:`Dokulu PEI Plakası`,smoothPEI:`Düz PEI Plakası`},pipelines:{label:`Pipeline`,applyAria:`Pipeline uygula`,applyPrompt:`Pipeline uygula…`,empty:`Kayıtlı pipeline yok`,saveButton:`Pipeline olarak kaydet`,saveTitle:`Dört slotluk mevcut seçimi yeniden kullanılabilir pipeline olarak kaydet`,namePlaceholder:`Pipeline adı`,nameAria:`Yeni pipeline adı`,toast:{applied:`"{{name}}" uygulandı`,saved:`Pipeline kaydedildi`,saveFailed:`Kaydetme başarısız`}}},spoolman:{title:`Spoolman Entegrasyonu`,enabled:`Spoolman Etkin`,url:`Spoolman URL`,connected:`Bağlı`,disconnected:`Bağlı Değil`,testConnection:`Bağlantıyı Test Et`,sync:`Senkronize Et`,syncing:`Senkronize ediliyor...`,lastSync:`Son Senkronizasyon`,linkToSpoolman:`Spoolman'a Bağla`,openInSpoolman:`Spoolman'da Aç`,unlinkSpool:`Makara Bağlantısını Kaldır`,unlinkConfirmTitle:`Makara Atamasını Kaldır?`,unlinkConfirmMessage:`Bu, makarayı bu yuvadan kaldıracak. Makara verisinin kendisi değişmeyecek.`,selectSpool:`Makara Seç`,noUnlinkedSpools:`Atanmamış makara yok`,linkSuccess:`Makara başarıyla atandı`,linkFailed:`Makara atanamadı`,unlinkSuccess:`Makara ataması başarıyla kaldırıldı`,unlinkFailed:`Makara ataması kaldırılamadı`,linkedSpool:`Atanan makara`,spoolId:`Makara ID`,fillSourceLabel:`(Spoolman)`,weight:`Ağırlık`,remaining:`Kalan`,disableWeightSync:`AMS Tahmini Ağırlık Senkronizasyonunu Devre Dışı Bırak`,disableWeightSyncDesc:`AMS tahminlerinden kalan kapasiteyi güncelleme. AMS yüzde tabanlı tahminler yerine Spoolman'ın kullanım takibini tercih ediyorsanız bunu kullanın. Yeni makaralar yine de başlangıç ağırlığı olarak AMS tahminini kullanacak.`,reportPartialUsage:`Başarısız Baskılar için Kısmi Kullanımı Bildir`,reportPartialUsageDesc:`Bir baskı başarısız olduğunda veya iptal edildiğinde, katman ilerlemesine göre o noktaya kadar kullanılan tahmini filamenti bildir.`},locations:{title:`Depolama Konumları`,subtitle:`Makaralarınız için raf, çekmece ve diğer fiziksel depolama yerlerini yönetin`,add:`Konum Ekle`,addShort:`Ekle`,edit:`Konumu Düzenle`,name:`Ad`,spools:`Makaralar`,sensors:`Sensörler`,empty:`Henüz depolama konumu yok. İlk rafınızı veya çekmecenizi oluşturun.`,manage:`Konumlar`,createPlaceholder:`örn. Raf A, Çekmece 1`,nameRequired:`Konum adı zorunludur`,created:`Konum oluşturuldu`,updated:`Konum güncellendi`,deleted:`Konum silindi`,saveFailed:`Konum kaydedilemedi`,deleteFailed:`Konum silinemedi`,deleteBlocked:`Silmeden önce bu konumdaki tüm makaraları taşıyın`,confirmDelete:`"{{name}}" silinsin mi?`,confirmDeleteMessage:`Bu konum kataloğdan kaldırılacak. Önce makaralar taşınmalıdır.`,confirmDeleteMessageWithSensors:`Bu konum kataloğdan kaldırılacak. Önce makaralar taşınmalıdır. Bağlı sensörler de silinecek.`},inventory:{title:`Makara Envanteri`,subtitle:`Makaralarınızı yönetin`,addToInventory:`Envantere Ekle`,addToInventoryPending:`Ekleniyor...`,addToInventorySuccess:`Makara envantere eklendi`,addToInventoryFailed:`Makara envantere eklenemedi`,unknownSpoolTitle:`Yeni filament algılandı`,unknownSpoolMessage:`{{location}} konumunda bilinmeyen RFID etiketli bir makara algılandı. Şimdi envantere eklensin mi?`,unknownSpoolSlot:`Yuva`,bulk:{selectAllVisible:`Görünenleri seç`,selectRow:`Satırı seç`,selectGroup:`Grubu seç`,selectionCount:`{{count}} seçildi`,edit:`Düzenle`,printLabels:`Etiket yazdır`,resetUsage:`Kullanımı sıfırla`,restore:`Geri yükle`,archive:`Arşivle`,delete:`Sil`,clearSelection:`Seçimi temizle`,editTitle:`Makaraları toplu düzenle`,editSubtitle:`Seçilen {{count}} makaraya uygulanır. Yalnızca işaretlediğiniz alanlar güncellenir.`,editHint:`Bir alana yazmak onu güncelleme için işaretler — yalnızca işaretli satırlar gönderilir. Boş bırakılan alanlar makaraları değiştirmez (alanları boşaltmak yalnızca makara bazında yapılabilir).`,useCustom:`"{{value}}" kullan`,toggleField:`Bu alanın güncellenmesini değiştir`,changeCount:`{{count}} alan güncellenecek.`,applyPending:`Uygulanıyor...`,applyButton:`{{count}} makaraya uygula`,deleteTitle:`Seçili makaraları sil`,archiveTitle:`Seçili makaraları arşivle`,restoreTitle:`Seçili makaraları geri yükle`,resetUsageTitle:`Seçili makaraların kullanımını sıfırla`,deleteMessage:`{{count}} makara kalıcı olarak silinsin mi? Bu işlem geri alınamaz.`,archiveMessage:`{{count}} makara arşivlensin mi? Daha sonra geri yüklenebilir.`,restoreMessage:`{{count}} arşivlenmiş makara geri yüklensin mi?`,resetUsageMessage:`{{count}} makaranın "Toplam Tüketim" sayacı sıfırlansın mı? Kalan ağırlık korunur.`,updateSuccess:`{{count}} makara güncellendi`,updateFailed:`Toplu güncelleme başarısız`,updatePartial:`{{ok}} makara güncellendi, {{failed}} başarısız`,updateAllFailed:`{{count}} güncellemenin tümü başarısız oldu — yeniden denemek için seçim korundu`,deleteSuccess:`{{count}} makara silindi`,deleteFailed:`Toplu silme başarısız`,deletePartial:`{{ok}} makara silindi, {{failed}} başarısız`,deleteAllFailed:`{{count}} silmenin tümü başarısız oldu — yeniden denemek için seçim korundu`,archiveSuccess:`{{count}} makara arşivlendi`,archiveFailed:`Toplu arşivleme başarısız`,archivePartial:`{{ok}} makara arşivlendi, {{failed}} başarısız`,archiveAllFailed:`{{count}} arşivlemenin tümü başarısız oldu — yeniden denemek için seçim korundu`,restoreSuccess:`{{count}} makara geri yüklendi`,restoreFailed:`Toplu geri yükleme başarısız`,restorePartial:`{{ok}} makara geri yüklendi, {{failed}} başarısız`,restoreAllFailed:`{{count}} geri yüklemenin tümü başarısız oldu — yeniden denemek için seçim korundu`,invalidHex:`6 hex karakter (RRGGBB) veya 8 (RRGGBBAA) girin. Aksi takdirde alan uygulanmaz.`},spoolmanMixedContentTitle:`Spoolman HTTPS üzerinden yüklenemiyor — tarayıcınız tarafından karışık içerik engellendi`,spoolmanMixedContentBody:`Bambuddy HTTPS üzerinden sunuluyor (ters proxy'niz aracılığıyla), ancak Spoolman URL'niz hâlâ düz HTTP. Tarayıcılar güvenlik için karışık içeriği engeller, bu nedenle gömülü Spoolman arayüzü oluşturulamaz. Bunun çalışması için Spoolman'in HTTPS üzerinden erişilebilir olması gerekiyor.`,spoolmanMixedContentFixReverseProxy:`Spoolman'i Bambuddy ile aynı ters proxy'nin (Traefik / Nginx / Caddy) arkasına HTTPS ile koyun, ardından Ayarlardaki Spoolman URL'sini yeni HTTPS adresine güncelleyin.`,spoolmanMixedContentFixOpenNewTab:`Geçici bir çözüm olarak, Spoolman'i HTTP üzerinden yeni bir tarayıcı sekmesinde açın — karışık içerik kuralları yalnızca gömülü çerçevelere uygulanır, bu nedenle bağımsız bir sekme yine çalışır.`,spoolmanOpenInNewTab:`Spoolman'i yeni sekmede aç`,labels:{title:`Makara etiketleri yazdır`,selectedCount:`{{count}} seçildi`,pickSpools:`Hangi makaralar için etiket yazdırılacağını seçin:`,monochrome:`Tek renk (siyah beyaz yazıcı)`,monochromeHint:`Renk örneğini kaldırır ve metni genişletir`,startingPosition:`Başlangıç etiket konumu`,startingPositionRange:`Yalnızca sayfa şablonları: L7160 için 1–21; 5160 için 1–30.`,startingPositionInvalid:`1 ile {{capacity}} arasında bir tam sayı girin.`,startingPositionFirst:`Yazdırma 1. konumdan başlar.`,startingPositionSkipped:`İlk sayfada 1 ile {{lastPosition}} arasındaki konumlar boş bırakılır.`,startingPositionRangeError:`Bu sayfanın başlangıç konumu 1 ile {{capacity}} arasında olmalıdır.`,searchPlaceholder:`Ad, marka veya #ID ara`,filterByMaterial:`Malzeme:`,allMaterials:`Tümü`,selectVisible:`Görünen tümünü seç ({{count}})`,deselectVisible:`Görünenleri seçimden kaldır`,clearAll:`Tümünü temizle`,noSpoolsToShow:`Gösterilecek makara yok. Filtrenizi ayarlayın ve tekrar deneyin.`,noMatches:`Mevcut arama veya filtreyle eşleşen makara yok.`,printOne:`Bu makara için etiket yazdır`,printLabels:`Etiketleri yazdır…`,bulkTitle:`Şu anda gösterilen {{count}} makaradan etiket yazdırılacak olanları seçin`,noSpoolsTitle:`Etiketlenecek makara yok`,error:`Etiketler oluşturulamadı: {{msg}}`,sortBy:{label:`Sırala:`,id:`ID'ye göre`,color:`Renge göre`},templates:{amsHolderSmall:{label:`AMS tutucu — küçük (74 × 33 mm)`,hint:`Sayfa başına tek etiket; MakerWorld model 752566 (AMS Filament Etiket Tutucu) yazdırılabilir etiketle eşleşir.`},amsHolderLarge:{label:`AMS tutucu — büyük (75 × 55 mm)`,hint:`Sayfa başına tek etiket; AMS Filament Etiket Tutucu'nun karton uçlu varyantına uyar. Numune, marka, malzeme, ID ve QR kod için yeterli yer.`},box40x30:{label:`Kutu etiketi (40 × 30 mm)`,hint:`Sayfa başına tek etiket; yaygın DK/Brother rulo boyutu, filament torbası ve depolama kutusu etiketleri için iyi.`},box:{label:`Kutu etiketi (62 × 29 mm)`,hint:`Sayfa başına tek etiket; Brother PT/QL ve Dymo küçük etiketleri için boyutlandırılmış.`},averyL7160:{label:`Avery L7160 — A4 sayfa (38.1 × 63.5 mm × 21)`,hint:`AB sayfa stoğu; A4 sayfa başına 21 etiket.`},avery5160:{label:`Avery 5160 — US Letter sayfa (25.4 × 66.7 mm × 30)`,hint:`ABD sayfa stoğu; Letter sayfası başına 30 etiket.`}}},csv:{importButton:`CSV İçe Aktar`,exportButton:`CSV Dışa Aktar`,modalTitle:`CSV'den makara içe aktar`,selectFile:`Bir CSV dosyası seçin veya buraya sürükleyin`,dragHint:`Başlık: material (zorunlu), brand, subtype, color_name, rgba, …`,parsing:`Dosya okunuyor…`,previewError:`CSV dosyası okunamadı`,validCount:`{{count}} geçerli`,errorCount:`{{count}} hatalı`,skippedCount:`{{count}} atlandı`,colRow:`Satır`,colStatus:`Durum`,colColor:`Renk`,colorResolved:`Renk katalogdan dolduruldu`,colorCrossMaterial:`Renk farklı bir malzemeden alındı — katalogda tam eşleşme yok`,duplicateExisting:`Bu malzeme, marka ve renkte bir makara zaten var — yine de yeni makara olarak içe aktarılacak`,spoolmanHint:`Spoolman modunda Spoolman'ın yerleşik CSV içe/dışa aktarımını kullanın.`,importValidRows:`{{count}} geçerli satırı içe aktar`,noValidRows:`Geçerli satır yok`,importing:`İçe aktarılıyor…`,importSuccess:`{{count}} makara içe aktarıldı`,importError:`İçe aktarma başarısız`,exportError:`Dışa aktarma başarısız`},addSpool:`Makara Ekle`,editSpool:`Makarayı Düzenle`,copySpool:`Makarayı Kopyala`,material:`Malzeme`,selectMaterial:`Malzeme seç...`,subtype:`Alt tür`,brand:`Marka`,searchBrand:`Marka ara...`,useCustomBrand:`"{{brand}}" kullan`,useCustomMaterial:`Özel malzeme kullan: {{material}}`,suggestedOptions:`Önerilen`,allOptions:`Tümü`,colorName:`Renk Adı`,colorNamePlaceholder:`Yeşim Beyazı, Ateş Kırmızısı...`,color:`Renk`,hexColor:`Hex Renk`,pickColor:`Özel renk seç`,labelWeight:`Etiket Ağırlığı`,coreWeight:`Boş Makara Ağırlığı`,searchSpoolWeight:`Makara ağırlığı ara...`,weightUsed:`Kullanılan`,currentWeight:`Kalan Ağırlık`,measuredWeight:`Ölçülen Ağırlık`,spoolName:`Makara`,costPerKg:`kg başına maliyet`,storageLocation:`Depolama Konumu`,temperature:`Sıcaklık`,humidity:`Nem`,battery:`Pil`,storageLocationPlaceholder:`örn. Raf A, Çekmece 1`,openInInventory:`Envanterde Aç`,measuredWeightError:`Ölçülen ağırlık {{min}}g ile {{max}}g arasında olmalı.`,slicerFilament:`Dilimleyici Filamenti`,slicerFilamentName:`Dilimleyici Ön Ayar Adı`,slicerPreset:`Dilimleyici Ön Ayarı`,searchPresets:`Filament ön ayarlarında ara...`,selectedPreset:`Seçildi`,noPresetsFound:`Ön ayar bulunamadı`,tempOverrides:`Sıcaklık Geçersiz Kılmaları`,note:`Not`,notePlaceholder:`Bu makara hakkında ek notlar...`,category:`Kategori`,categoryPlaceholder:`örn. Üretim, Prototip, Müşteri A`,categoryNone:`Kategorisiz`,storageLocationNone:`Konum ayarlanmamış`,lowStockThresholdOverride:`Düşük stok eşiği (bu makara)`,lowStockThresholdOverrideHelp:`Global eşiği kullanmak için boş bırakın (%{{global}}).`,clearRfid:`RFID Etiketini Temizle`,rfidCleared:`RFID etiketi temizlendi`,archive:`Arşivle`,restore:`Geri Yükle`,noSpools:`Henüz makara yok. Başlamak için ilk makaranızı ekleyin.`,noAvailableSpools:`Kullanılabilir makara yok. Envanterinize bir makara ekleyin veya önce başka bir yuvadan atamayı kaldırın.`,kProfiles:`K-Profilleri`,addKProfile:`K-Profili Ekle`,assignSpool:`Makara Ata`,unassignSpool:`Atamayı Kaldır`,assignSuccess:`Makara atandı ve AMS yuvası yapılandırıldı`,assignPendingInsert:`Atandı. Makarayı yerleştirdiğinizde yuva yapılandırılacak.`,assignFailed:`Makara atanamadı`,selectSpool:`Bu yuvaya atamak için bir makara seçin`,assigned:`Atandı`,assigning:`Atanıyor...`,searchSpools:`Makaralarda ara...`,showAllSpools:`Tüm makaraları göster`,spoolmanSpools:`Spoolman Makaraları`,allMaterials:`Tüm Malzemeler`,filterByBrand:`Markaya göre filtrele...`,showArchived:`Arşivlenmişleri göster`,quickAdd:`Hızlı Ekle (Stok)`,quantity:`Miktar`,stock:`Stok`,configured:`Yapılandırıldı`,spoolsCreated:`{{count}} makara oluşturuldu`,spoolsPartiallyCreated:`{{total}} makaradan {{created}} tanesi oluşturuldu (bazıları başarısız)`,spoolCreated:`Makara oluşturuldu`,spoolUpdated:`Makara güncellendi`,spoolDeleted:`Makara silindi`,deepLinkSpoolNotFound:`Makara bulunamadı`,deepLinkFetchFailed:`Makara yüklenemedi — tekrar deneyin`,spoolArchived:`Makara arşivlendi`,spoolRestored:`Makara geri yüklendi`,kProfileSaveFailed:`K-profili ayarları kaydedilemedi`,syncWeightSpoolNotFound:`Makara bulunamadı — silinmiş olabilir`,syncWeightSpoolmanUnreachable:`Spoolman'a erişilemiyor — daha sonra tekrar deneyin`,syncWeightFailed:`Ağırlık senkronize edilemedi`,spoolmanUnreachable:`Spoolman erişilebilir değil — lütfen daha sonra tekrar deneyin`,deleteSpoolNotFound:`Makara bulunamadı — zaten silinmiş olabilir`,deleteFailed:`Makara silinemedi`,archiveSpoolNotFound:`Makara bulunamadı — zaten silinmiş olabilir`,archiveFailed:`Makara arşivlenemedi`,restoreSpoolNotFound:`Makara bulunamadı — zaten silinmiş olabilir`,restoreFailed:`Makara geri yüklenemedi`,saveFailed:`Değişiklikler kaydedilemedi`,tagClearFailed:`Etiket temizlenemedi`,deleteConfirm:`Bu makarayı silmek istediğinizden emin misiniz? Bu geri alınamaz.`,archiveConfirm:`Bu makarayı arşivlemek istediğinizden emin misiniz?`,advancedSettings:`Gelişmiş Ayarlar`,filamentInfoTab:`Filament Bilgisi`,paProfileTab:`PA Profili`,colorAndCostTab:`Renk ve maliyet`,printersTab:`Yazıcılar`,filamentInfo:`Filament`,additional:`Ek`,loadingPresets:`Bulut ön ayarları yükleniyor...`,cloudConnected:`Bulut bağlı`,cloudNotConnected:`Bulut bağlı değil (varsayılanlar kullanılıyor)`,recentColors:`Son Kullanılan`,searchColors:`Renklerde ara...`,searchResults:`Arama sonuçları`,allColors:`Tüm renkler`,commonColors:`Yaygın renkler`,showLess:`Daha az göster`,showAll:`Tümünü göster`,noColorsFound:`Aramanızla eşleşen renk yok`,noResults:`Eşleşme bulunamadı`,extraColorsLabel:`Ekstra renkler`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Virgülle ayrılmış 2 ile 8 arası hex durağı yapıştırın. Bir gradyan olarak görüntülenir.`,extraColorsInvalid:`Geçersiz hex yok sayıldı: {{tokens}}`,colorEffectLabel:`Efekt`,colorEffect:{none:`Yok`,sparkle:`Parıltı`,wood:`Ahşap`,marble:`Mermer`,glow:`Parlama`,matte:`Mat`,silk:`İpek`,galaxy:`Galaksi`,rainbow:`Gökkuşağı`,metal:`Metal`,translucent:`Yarı saydam`,gradient:`Gradyan`,dualColor:`Çift Renk`,triColor:`Üç Renk`,multicolor:`Çok Renkli`},selectMaterialFirst:`Lütfen önce Filament Bilgisi sekmesinde bir malzeme seçin.`,noPrintersConfigured:`Yapılandırılmış yazıcı yok. PA profillerini kullanmak için yazıcı ekleyin.`,matchingFilter:`Eşleşen`,anyBrand:`Herhangi marka`,anyVariant:`Herhangi varyant`,autoSelect:`Otomatik seç`,matches:`eşleşme`,match:`eşleşme`,noMatches:`Eşleşme yok`,connected:`Bağlı`,offline:`Çevrimdışı`,printerOffline:`Yazıcı çevrimdışı. Kalibrasyon profillerini görüntülemek için bağlanın.`,noKProfilesMatch:`Seçilen filamentle eşleşen K-profili yok.`,leftNozzle:`Sol Nozul`,rightNozzle:`Sağ Nozul`,profilesSelected:`kalibrasyon profili seçildi`,filamentPreset:`Filament ön ayarı`,presetUseSpoolDefault:`Makaranın ön ayarını kullan`,presetInherited:`devralındı`,presetOverride:`geçersiz kılındı`,presetNeedsModel:`Bu yazıcı modelini henüz bildirmedi, bu yüzden kendi ön ayarı olamaz.`,autoMatchPresets:`Otomatik eşleştir`,autoMatchPresetsHint:`Makara ön ayarının her modeli adıyla anan çeşidini bul`,kProfilesPerPrinter:`K profilleri`,kProfileNotSet:`Ayarlanmadı`,kProfileFlowMismatch:`Bu profil {{profile}} nozul ile ölçüldü ancak takılı nozul {{fitted}}, bu yüzden uygulanmayacak`,nozzle:`Nozul`,unknownModel:`Bilinmeyen model`,onePrinter:`1 yazıcı`,nPrinters:`{{n}} yazıcı`,filamentPresetsLoadFailed:`Bu makaranın modele özel ön ayarları yüklenemedi`,filamentPresetSaveFailed:`Modele özel ön ayarlar kaydedilemedi`,totalInventory:`Toplam Envanter`,totalConsumed:`Toplam Tüketim`,byMaterial:`Malzemeye Göre`,inPrinter:`Yazıcıda`,lowStock:`Düşük Stok`,sinceTracking:`Takip başladığından beri`,resetConsumedCounter:`Sayacı sıfırla`,resetConsumedCounterTooltip:`Bu makara için tüketilen gram sayacını sıfırla. Kalan ağırlık değişmez.`,resetConsumedCounterConfirm:`Bu makaranın tüketilen gram sayacı 0'a sıfırlansın mı? Gelecekteki baskılar sıfırdan tekrar takip edilecek. Makaranın kendisi, kalan ağırlık hesaplaması ve ayarlarınız değiştirilmez.`,resetAllConsumedCounters:`Tüm sayaçları sıfırla`,resetAllConsumedCountersTooltip:`Her makarada tüketilen gram sayacını sıfırla. Kalan ağırlıklar değişmez.`,resetAllConsumedCountersConfirm:`Tüm {{count}} makaradaki (arşivlenmişler dahil) tüketilen gram sayacı 0'a sıfırlansın mı? Bu, "Toplam Tüketim" istatistiğini temizler, böylece gelecekteki baskılar sıfırdan takip edilir. Makaralar ve kalan ağırlıklar değiştirilmez.`,consumedCounterReset:`Sayaç sıfırlandı`,allConsumedCountersReset:`{{count}} makaranın sayacı sıfırlandı`,resetConsumedCounterFailed:`Sayaç sıfırlanamadı`,loadedInAms:`AMS/Ext'te Yüklü`,remaining:`Kalan`,weightCheck:`Ağırlık Kontrolü`,lastWeighed:`Son tartım`,neverWeighed:`Hiç tartılmadı`,search:`Makaralarda ara...`,showing:`Gösterilen`,to:`-`,of:`/`,show:`Göster`,spools:`makara`,spool:`makara`,page:`Sayfa`,noSpoolsMatch:`Sonuç bulunamadı`,noSpoolsMatchDesc:`Aradığınızı bulmak için aramanızı veya filtrelerinizi ayarlamayı deneyin.`,active:`Aktif`,archived:`Arşivlendi`,all:`Tümü`,used:`Kullanılmış`,new:`Yeni`,clearFilters:`Filtreleri temizle`,table:`Tablo`,cards:`Kartlar`,net:`Net`,groupSimilar:`Grupla`,groupedSpools:`{{count}} aynı makara`,groupedRows:`satır`,columns:`Sütunlar`,configureColumns:`Sütunları Yapılandır`,configureColumnsDesc:`Sütunları yeniden sıralamak için sürükleyin veya okları kullanın. Göz simgesiyle görünürlüğü değiştirin.`,visible:`görünür`,reset:`Sıfırla`,cancel:`İptal`,applyChanges:`Değişiklikleri Uygula`,moveUp:`Yukarı taşı`,moveDown:`Aşağı taşı`,hideColumn:`Sütunu gizle`,showColumn:`Sütunu göster`,linkToSpool:`Makaraya Bağla`,tagLinked:`Etiket makaraya bağlandı`,tagLinkFailed:`Etiket bağlanamadı`,tagAlreadyLinked:`Etiket zaten #{{id}} numaralı makaraya bağlı`,unknownTag:`Bilinmeyen RFID etiketi algılandı`,usageHistory:`Kullanım Geçmişi`,noUsageHistory:`Henüz kullanım kaydedilmedi`,printName:`Baskı Adı`,weightConsumed:`Tüketilen Ağırlık`,clearHistory:`Temizle`,historyCleared:`Kullanım geçmişi temizlendi`,fillSourceLabel:`(Env)`,lowStockThresholdError:`Eşik 0.1 ile 99.9 arasında olmalı`,assignMismatchTitle:`Malzeme uyumsuzluğu`,assignMismatchMessage:`Seçilen makara malzemesi "{{spoolMaterial}}", {{location}} için tepsi malzemesi "{{trayMaterial}}" ile eşleşmiyor. Yine de atansın mı?`,assignMismatchConfirm:`Yine de Ata`,assignPartialMismatchMessage:`Makara malzemesi "{{spoolMaterial}}", {{location}} konumundaki "{{trayMaterial}}" ile benzer ancak tam olarak eşleşmiyor. Devam etmek istiyor musunuz?`,assignProfileMismatchMessage:`Makara profili "{{spoolProfile}}", {{location}} konumundaki tepsi profili "{{trayProfile}}" ile eşleşmiyor. Devam etmek istiyor musunuz?`,assignReconfigureNote:`AMS yuvası, makaranın profilini kullanacak şekilde yeniden yapılandırılacak.`,spoolmanFilamentCatalog:`Spoolman Filament Kataloğu`,pickFromSpoolmanCatalog:`Spoolman kataloğundan seç…`,spoolmanFilamentSelected:`Filament Spoolman kataloğundan seçildi`,spoolmanFilamentUnlinked:`Filament katalog bağlantısı temizlendi`,noSpoolmanFilaments:`Spoolman kataloğunda filament bulunamadı`,spoolmanFilamentColorSwatch:`Filament rengi`,spoolWeightManagedBySpoolman:`Boş makara ağırlığı Spoolman'de filament türü başına yönetilir`,spoolmanCatalogLoadFailed:`Spoolman filament kataloğu yüklenemedi`},timelapse:{title:`Zaman Atlamalı Video`,create:`Zaman Atlamalı Video Oluştur`,download:`İndir`,delete:`Sil`,preview:`Önizleme`,frameRate:`Kare Hızı`,quality:`Kalite`,processing:`İşleniyor...`,noTimelapses:`Kullanılabilir zaman atlamalı video yok`},ams:{title:`AMS`,slot:`Yuva`,empty:`Boş`,emptySlot:`Boş yuva`,slotEmpty:`Boş`,slotUnconfigured:`?`,emptySlotReset:`Atanmış filament yok`,unknown:`Bilinmiyor`,humidity:`Nem`,temperature:`Sıcaklık`,filamentType:`Filament Türü`,filamentColor:`Renk`,remaining:`Kalan`,history:`AMS Geçmişi`,noHistory:`Geçmiş mevcut değil`,configureSlot:`Yuvayı Yapılandır`,externalSpool:`Harici Makara`,profile:`Profil`,kFactor:`K Faktörü`,kFactorShort:`K`,fill:`Doldur`,configure:`Yapılandır`,used:`kullanılan`,remainingUnit:`kalan`},printModal:{variants:{editNote:`Bu alternatifler iş kuyruğa alınırken belirlendi. Değiştirmek için iptal edip yeniden kuyruğa alın.`,title:`Yazıcı alternatifleri`,help:`Tek iş, tek kuyruk yeri. Uygun olan ilk boşalan yazıcı kendi dosyasını yazdırır.`,unknownModel:`Bilinmeyen model`,plateFor:`{{filename}} için tabla`,moveUp:`Yukarı taşı`,moveDown:`Aşağı taşı`,queued:`{{count}} alternatifle kuyruğa alındı`},selectPrinter:`Yazıcı Seç`,selectPlate:`Plaka Seç`,filamentMapping:`Filament Eşlemesi`,useArchiveMapping:`Eşleme`,useArchiveMappingTooltip:`Tür/renge göre eşleştirmek yerine, bu arşivle kaydedilen AMS eşlemesindeki (dilimleyiciden) her yuvayı seç.`,clickToChangeSlot:`Yuva atamasını değiştirmek için tıklayın`,reRead:`Yeniden oku`,plateN:`Plaka {{n}}`,plateFilamentsUnreadable:`Seçili bir plakanın filamentleri okunamadı, bu yüzden eşleştirilemiyor. Diğerlerini kuyruğa almak için o plakanın seçimini kaldırın.`,totalCost:`Toplam maliyet:`,slotRemainingShort:` - {{grams}}g kaldı`,printSettings:`Baskı Ayarları`,bedLeveling:`Tabla Seviyelendirme`,flowCalibration:`Akış Kalibrasyonu`,vibrationCalibration:`Titreşim Kalibrasyonu`,layerInspection:`İlk Katman Denetimi`,timelapse:`Zaman Atlamalı Video`,cancel:`İptal`,noPrintersAvailable:`Kullanılabilir yazıcı yok`,printerBusy:`Yazıcı meşgul`,printerOffline:`Yazıcı çevrimdışı`,sameTypeDifferentColor:`Aynı tür, farklı renk`,filamentTypeNotLoaded:`Filament türü yüklenmedi`,statusReady:`Hazır`,statusColorMismatch:`Renk uyuşmuyor`,statusTypeNotFound:`Tür bulunamadı`,requiredTooltip:`Gereken: {{name}} - {{color}}`,manuallySelected:`Elle seçildi`,autoMatched:`Otomatik eşleşti`,selectSlot:`Yuva seç`,sameTypeDifferentColorDetail:`Aynı tür, farklı renk: {{required}} gerekiyor, yuvada {{loaded}} var`,requiredTypeNotInPrinter:`Gereken filament türü yazıcıda bulunamadı.`,whenToPrint:`Ne zaman yazdırılsın`,asap:`En kısa sürede`,queue:`Kuyruk`,schedule:`Zamanla`,dateTime:`Tarih ve saat`,invalidDateTime:`Lütfen geçerli bir tarih ve saat girin`,openCalendar:`Takvimi aç`,requireManualStart:`Manuel başlatma gerektir`,requirePreviousSuccess:`Yalnızca önceki baskı başarılıysa başlat`,autoOffAfter:`Bittiğinde yazıcıyı kapat`,helpAsap:`Baskı kuyruğun en üstüne eklenir ve uygun bir yazıcı boştaysa başlar.`,helpSchedule:`Yazıcı boşta ise baskı zamanlanan saatte başlar. Meşgulse yazıcı uygun olana kadar bekler.`,helpQueue:`Baskı kuyruğun sonuna eklenir.`,leftNozzle:`S`,rightNozzle:`R`,leftNozzleTooltip:`Sol nozul`,rightNozzleTooltip:`Sağ nozul`,ftsSameInletHint:`Bu baskıdaki tüm filamentler Filament Hattı Değiştirici IN-{{inlet}} girişinde. Aynı girişteki filamentler arasında geçiş daha yavaştır — birini diğer girişteki bir AMS'e taşıyın.`,rackPosition:`Rack konumu`,rackPositionTooltip:`Bu filamenti rack üzerindeki hangi nozulun basacağı. Konumlar yazıcıdaki gibi numaralandırılmıştır.`,rackEmptyPosition:`Bu rack konumu boş`,rackWrongNozzle:`{{has}} nozul takılı; bu filament {{needs}} gerektiriyor`,filamentOverride:`Filament Geçersiz Kılma`,filamentOverrideHint:`Model tabanlı atama için isteğe bağlı olarak filamentleri geçersiz kıl. Planlayıcı, orijinal 3MF değerleri yerine seçtiğiniz filamentlere göre eşleşecek.`,originalFilament:`Orijinal`,overrideWith:`Şununla geçersiz kıl`,resetToOriginal:`Orijinale sıfırla`,insufficientFilamentTitle:`Yeterli filament yok`,waitingForAmsStatus:`{{printer}} için AMS durumu bekleniyor…`,insufficientFilamentMessage:`Bazı atanmış makaralarda bu baskının ihtiyaç duyduğundan daha az filament kaldı:`,insufficientFilamentLine:`{{printer}} - {{slot}}: {{required}}g gerekli, {{remaining}}g kaldı`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: {{required}}g gerekli, eşleşen makaralarda toplam {{remaining}}g (AMS Filament Backup)`,printAnyway:`Yine de yazdır`,forceColorMatch:`Renk eşleşmesini zorla`,staggerPrinterStarts:`Yazıcı başlangıçlarını kademelendir`,staggerGroupSize:`Grup boyutu`,staggerInterval:`Aralık (dk)`,staggerPreview:`{{printers}} yazıcı → {{size}} kişilik {{groups}} grup, her {{interval}} dk'da bir başlatılıyor`,staggerLastGroup:`son grup: {{count}}`,staggerTotal:`toplam: {{minutes}} dk`,staggerToPrinters:`{{count}} yazıcıya kademelendir`,gcodeInjection:`Otomatik baskı G-kodu enjekte et`,insufficientBudget:`Yetersiz bütçe`,unlimitedNoBudget:`Sınırsız – bütçe limiti belirlenmemiş.`,noPrintableCostCenters:`Yazdırma için kullanılabilir etkin bir masraf merkezi yok. Bir yöneticiden yazdırma erişimi vermesini isteyin.`},backup:{includesEncryptionKey:`Yerel yedekler, yedek ZIP'nin kendi içinde tamamlanmış olması için MFA şifreleme anahtarı dosyasını (DATA_DIR/.mfa_encryption_key) içerir. ZIP'yi hassas olarak değerlendirin — dosyaya sahip olan herkes içinde saklanan OIDC istemci gizli anahtarlarını ve TOTP gizli anahtarlarını çözebilir.`,title:`Yedekleme ve Geri Yükleme`,createBackup:`Yedek Oluştur`,restoreBackup:`Yedeği Geri Yükle`,restoreDescription:`Tüm verileri bir yedek dosyasından değiştir`,downloadBackup:`Yedeği İndir`,uploadBackup:`Yedek Yükle`,lastBackup:`Son Yedek`,autoBackup:`Otomatik Yedekleme`,backupNow:`Şimdi Yedekle`,restoreWarning:`Uyarı: Bir yedeği geri yüklemek tüm mevcut verilerin üzerine yazacak.`,includeArchives:`Arşivleri Dahil Et`,includeSettings:`Ayarları Dahil Et`,includeProfiles:`Profilleri Dahil Et`,backupSuccess:`Yedek başarıyla oluşturuldu`,restoreSuccess:`Yedek başarıyla geri yüklendi`,backupFailed:`Yedekleme başarısız`,restoreFailed:`Geri yükleme başarısız`,restoreNote:`Geri yükleme sırasında Sanal Yazıcı durdurulacak`,githubBackup:`Git Yedekleme`,enabled:`Etkin`,cloudLoginRequired:`Bambu Cloud girişi gerekli. GitHub yedeklemesini etkinleştirmek için Profiller → Bulut Profilleri altında giriş yapın.`,cloudLoginRequiredShort:`Bulut girişi gerekli`,githubDescription:`Yedekleme ve sürüm geçmişi için profillerinizi otomatik olarak özel bir GitHub deposuna senkronize et.`,repoIsPrivate:`Depo özel — yedeklemek için güvenli.`,repoIsPublicWarning:`Depo HERKESE AÇIK. Bambuddy yedekleri MQTT kimlik bilgilerini, Home Assistant belirteçlerini, Prometheus belirteçlerini, Bambu Cloud e-postanızı ve K-profilleri aracılığıyla yazıcı erişim kodlarını içerir. Sağlayıcınızın ayarlarında depoyu özel hale getirene kadar kaydetme engellenir.`,repoVisibilityUnknown:`Depo görünürlüğü belirlenemedi. Bambuddy, özel olarak onaylanmamış hiçbir şeye yedekleme yapmayı reddeder; kaydetme engellenecek.`,repositoryUrl:`Depo URL'si`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Güvensiz HTTP'ye izin ver`,allowInsecureHttpHint:`TLS olmadan özel ağlarda kendi barındırılan örnekler için etkinleştir`,personalAccessToken:`Kişisel Erişim Belirteci`,tokenSaved:`(kaydedildi)`,enterNewToken:`Güncellemek için yeni belirteç girin`,tokenHintGitHub:`Contents okuma ve yazma erişimi olan ayrıntılı belirteç ya da repo kapsamlı klasik belirteç.`,tokenHintGitLab:`api kapsamlı belirteç ya da read_repository ile write_repository birlikte.`,tokenHintGitea:`write:repository kapsamlı belirteç.`,tokenHintForgejo:`write:repository kapsamlı belirteç. Yalnızca bu depoyla sınırlı bir belirteç yeterlidir.`,branch:`Dal`,provider:`Git Sağlayıcısı`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Yalnızca manuel`,hourly:`Saatlik`,daily:`Günlük`,weekly:`Haftalık`,includeInBackup:`Yedeğe dahil et`,kProfiles:`K-Profilleri`,kProfilesDescription:`Bağlı yazıcılardan basınç ilerleme kalibrasyonu`,noPrintersConnected:`Bağlı yazıcı yok`,printersConnected:`{{connected}}/{{total}} bağlı`,cloudProfiles:`Bulut Profilleri`,cloudProfilesDescription:`Bambu Cloud ve Orca Cloud'dan filament, yazıcı ve işlem ön ayarları`,cloudProfilesAccounts:`Bağlı hesaplar — Bambu Cloud: {{bambu}}, Orca Cloud: {{orca}}`,appSettings:`Uygulama Ayarları`,appSettingsDescription:`Bambuddy yapılandırması (tam veritabanı)`,spoolInventory:`Makara Envanteri`,spoolInventoryDescription:`Filament makaraları, kullanım geçmişi ve maliyet takibi`,printArchives:`Baskı Arşivleri`,printArchivesDescription:`Baskı geçmişi meta verileri (gcode/3MF dosyaları yok)`,lastBackupAt:`Son yedek:`,noBackupsYet:`Henüz yedek yok`,next:`Sonraki:`,startingBackup:`Yedekleme başlatılıyor...`,test:`Test`,enableBackup:`Yedeklemeyi Etkinleştir`,testConnection:`Bağlantıyı Test Et`,enterRepoUrl:`Depo URL'sini girin`,enterRepoAndToken:`Depo URL'si ve erişim belirteci girin`,repoRequired:`Depo URL'si gerekli`,tokenRequired:`Erişim belirteci gerekli`,githubBackupEnabled:`GitHub yedeklemesi etkinleştirildi`,tokenUpdated:`Belirteç güncellendi`,settingsSaved:`Ayarlar kaydedildi`,failedToSave:`Kaydedilemedi: {{message}}`,backupCompleteFiles:`Yedekleme tamamlandı - {{count}} dosya güncellendi`,backupSkippedNoChanges:`Yedekleme atlandı - değişiklik yok`,backupFailed2:`Yedekleme başarısız: {{message}}`,clearedLogs:`{{count}} günlük temizlendi`,failedToClearLogs:`Günlükler temizlenemedi: {{message}}`,restoreFromGit:{button:`Git'ten Geri Yükle`,title:`Git yedeğinden geri yükle`,subtitle:`Bir commit ve geri yüklenecek verileri seçin`,commitLabel:`Yedek commit'i`,latestCommit:`En son yedek (dal ucu)`,categoriesLabel:`Neler geri yüklenecek`,inspecting:`Yedek içeriği okunuyor...`,itemCount:`yedekte {{count}} kayıt`,overwriteLabel:`Mevcut kayıtların üzerine yaz`,overwriteOn:`Mevcut kayıtlar yedekten güncellenecek.`,overwriteOff:`Yalnızca eksik kayıtlar eklenir; mevcut olanlara dokunulmaz.`,selectedCount:`{{count}} seçildi`,restoring:`Geri yükleniyor...`,confirmTitle:`Yedekten geri yüklensin mi?`,confirmMessage:`Seçilen kategoriler bu commit'ten geri yüklenecek. Eksik kayıtlar eklenir, mevcut kayıtlar olduğu gibi kalır.`,confirmMessageOverwrite:`Seçilen kategoriler bu commit'ten geri yüklenecek ve yerelde bulunan kayıtların üzerine yazılacak. Bu işlem geri alınamaz.`,kprofilesOverwriteCaveat:`K profilleri istisnadır: bir yuvaya yazmak yazıcıdaki kalibrasyonu her zaman değiştirir.`,tally:`{{restored}} geri yüklendi, {{skipped}} atlandı, {{failed}} başarısız`,reloadHint:`Geri yüklenen verilerin her yerde görünmesi için Bambuddy'yi yeniden yükleyin.`,partialHint:`Yukarıda listelenen kategoriler tamamlandı ve kaydedildi. Eksik olanlar hiç çalıştırılmadı.`,failed:`Geri yükleme başarısız oldu.`,loadFailed:`Yedek deposu okunamadı.`,details:{notPresent:`Bu yedek commit'inde yok`,unreadableJson:`Okunamayan JSON: {{paths}}`,settingsNoPayload:`Veride ayar yok`,settingsCredentialsWillSkip:`Kimlik bilgisi benzeri {{count}} anahtar atlanacak`,settingsCompanionWillSkip:`Kimlik bilgisi benzeri {{count}} anahtar atlanacak ve bunlara bağlı {{companion}} anahtar kapalı bırakılacak`,settingsCompanionOnlyWillSkip:`{{companion}} anahtar kapalı bırakılacak - her birinin ihtiyaç duyduğu kimlik bilgisi bir yedekten geri yüklenemez`,spoolsUsageCount:`{{count}} kullanım kaydı dahil`,archivesMetadataOnly:`Yalnızca üst veri - 3MF dosyaları ve küçük resimler Git yedeğinde yer almaz`,kprofilesPrinterCount:`{{count}} yazıcı genelinde`},notes:{noData:`Bu yedekte bu türde veri yok`,archivesPrinterMissing:`Bazı arşivler artık var olmayan yazıcılara işaret ediyordu - bağlantı temizlendi`,archivesProjectMissing:`Bazı arşivler artık var olmayan projelere işaret ediyordu - bağlantı temizlendi`,archivesOwnerCleared:`Bazı arşivler artık var olmayan kullanıcılara işaret ediyordu - sahip temizlendi, bu yüzden bir yönetici yeniden atayana kadar yalnızca archives:read_all iznine sahip kullanıcılara görünürler`,archivesOwnerUnmatched:`Bazı arşivler bu örnekte bulunmayan bir sahibi belirtiyor - sahip, yedekteki kullanıcı kimliğinden tahmin edilmek yerine temizlendi, bu yüzden bir yönetici yeniden atayana kadar yalnızca archives:read_all iznine sahip kullanıcılara görünürler`,archivesOwnerUnknown:`Bazı arşivler sahipsiz geri yüklendi - bu yedek sahip bilgisi içermiyor, bu yüzden bir yönetici atama yapana kadar yalnızca archives:read_all iznine sahip kullanıcılara görünürler`,archivesUndeleted:`Yedekten sonra silinen arşivler yeniden görünür oldu - üzerine yazma açıktı`,archivesMetadataOnly:`Geri yüklenen arşivler yalnızca üst veri içerir - 3MF dosyaları ve küçük resimler Git yedeğinde yer almaz`,spoolUsageUnresolved:`{{count}} kullanım kaydı atlandı - makaraları bu yedeğin makara listesinde olmadığı için bağlanacak bir şey yok.`,spoolUsageUnlinked:`{{count}} kullanım kaydı baskı geçmişi bağlantısı olmadan geri yüklendi - bağlantıyı korumak için Baskı arşivlerini Makara envanteriyle birlikte seçin.`,spoolTagKept:`{{count}} makara etiketi olduğu gibi bırakıldı - yedek, o zamandan beri okutulmuş bir etiketi silecek ya da ikinci bir makaraya taşıyacaktı.`,settingsCredentialsSkipped:`Kimlik bilgisi benzeri {{count}} anahtar atlandı - gizli değerleri elle yeniden girin`,settingsAuthSkipped:`{{count}} kimlik doğrulama ayarı atlandı - kilitlenme kontrolleri çalışmaya devam etsin diye bunları Ayarlar > Kimlik Doğrulama bölümünden değiştirin`,settingsCompanionSkipped:`{{keys}} kapalı bırakıldı - her birinin ihtiyaç duyduğu kimlik bilgisi bir yedekten geri yüklenemez ve bu örnekte kayıtlı değil, dolayısıyla açmak entegrasyonu kimlik doğrulamasız bırakırdı`,settingsMqttRelayFailed:`MQTT ayarları geri yüklendi ancak röle yeniden bağlanamadı - Bambuddy'yi yeniden başlatın`,kprofilesAlwaysOverwrite:`K profilleri yazıcıdaki eşleşen yuvanın her zaman üzerine yazar`,kprofilesAckUnreliable:`Yanıt vermeyen bir yazıcı yine de geri yüklendi sayılır - profilleri yazıcıda doğrulayın`,kprofilesPrinterMissing:`{{serial}} seri numaralı yazıcı yok - atlandı`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) bağlı değil - atlandı`,kprofilesUnknownNozzle:`{{serial}} için beklenmeyen nozul çapı {{nozzle}} - olduğu gibi gönderildi`,kprofilesUnmatched:`{{nozzle}} için {{count}} profilin {{printer}} üzerinde karşılığı yoktu - yeni profil olarak eklendi`,kprofilesSendFailed:`{{nozzle}} profilleri {{printer}} ({{serial}}) yazıcısına gönderilemedi`,kprofilesRefused:`{{printer}} ({{serial}}) {{nozzle}} profillerini reddetti: {{reason}}`,kprofilesStepFailed:`K profili adımı tamamlanamadı - {{reason}}. Bundan önce geri yüklenenler yine de kaydedildi.`}},history:`Geçmiş`,clear:`Temizle`,date:`Tarih`,status:`Durum`,trigger:`Tür`,triggers:{manual:`Yedek (manuel)`,scheduled:`Yedek (zamanlanmış)`,restore:`Geri yükleme`},commit:`Commit`,localBackup:`Yerel Yedekleme`,localBackupDescription:`Veritabanı, arşivler, yüklemeler ve tüm dosyalar dahil Bambuddy verilerinizin tam bir yedeğini oluşturun.`,downloadBackupLabel:`Yedeği İndir`,completeBackupZip:`Tam yedek: veritabanı + tüm dosyalar (ZIP)`,download:`İndir`,preparingBackup:`Yedek hazırlanıyor...`,creatingArchive:`Yedek arşivi oluşturuluyor... Büyük arşivler için bu biraz zaman alabilir.`,downloadingFile:`Yedek dosyası indiriliyor...`,backupDownloaded:`Yedek başarıyla indirildi`,failedToCreateBackup:`Yedek oluşturulamadı: {{message}}`,restore:`Geri Yükle`,restoreReplacesAll:`Geri yükleme tüm verilerin yerine geçer.`,restoreReplacesAllDetail:`Mevcut veritabanınız ve dosyalarınız tamamen değiştirilecek. Geri yüklemeden sonra yeniden başlatma gerekli.`,restoreConfirmTitle:`Yedeği Geri Yükle`,restoreConfirmMessage:`"{{filename}}" dosyasından geri yüklemek istediğinizden emin misiniz? Bu, mevcut veritabanınızı ve tüm dosyaları tamamen değiştirecek. Geri yüklemeden sonra uygulamanın yeniden başlatılması gerekecek.`,restoreConfirmButton:`Yedeği Geri Yükle`,uploadingFile:`Yedek dosyası yükleniyor...`,backupRestoredRestart:`Yedek geri yüklendi. Lütfen Bambuddy'yi yeniden başlatın.`,failedToRestore:`Yedek geri yüklenemedi. Lütfen dosya formatını kontrol edin.`,reloadNow:`Şimdi Yeniden Yükle`,creatingBackup:`Yedek Oluşturuluyor`,restoringBackup:`Yedek Geri Yükleniyor`,preparing:`Hazırlanıyor...`,processing:`İşleniyor...`,doNotClosePage:`Lütfen bu sayfayı kapatmayın veya başka bir yere gitmeyin. Büyük yedekler için bu işlem birkaç dakika sürebilir.`,restoring:`Geri yükleniyor...`,restoreComplete:`Geri Yükleme Tamamlandı`,restoreFailed2:`Geri Yükleme Başarısız`,importSettings:`Ayarları bir yedek dosyasından içe aktar`,pleaseWaitRestoring:`Verileriniz geri yüklenirken lütfen bekleyin`,selectBackupFile:`Yedek dosyası seçmek için tıklayın (.json veya .zip)`,duplicateHandling:`Yinelenen yönetiminin nasıl çalıştığı:`,matchPrinters:`Yazıcılar`,matchPrintersBy:`seri numarasına göre eşleşti`,matchSmartPlugs:`Akıllı Prizler`,matchSmartPlugsBy:`IP adresine göre eşleşti`,matchNotificationProviders:`Bildirim Sağlayıcıları`,matchNotificationProvidersBy:`ada göre eşleşti`,matchFilaments:`Filamentler`,matchFilamentsBy:`ad + tür + markaya göre eşleşti`,matchArchives:`Arşivler`,matchArchivesBy:`içerik hash'ine göre eşleşti (her zaman atlanır)`,matchPendingUploads:`Bekleyen Yüklemeler`,matchPendingUploadsBy:`dosya adına göre eşleşti`,matchSettingsTemplates:`Ayarlar ve Şablonlar`,matchSettingsTemplatesBy:`her zaman üzerine yazılır`,replaceExisting:`Mevcut veriyi değiştir`,keepExisting:`Mevcut veriyi koru`,overwriteDescription:`Zaten mevcut olan öğeleri yedek verisiyle üzerine yaz`,keepDescription:`Yalnızca zaten mevcut olmayan öğeleri geri yükle`,overwriteCaution:`Dikkat:`,overwriteWarning:`Üzerine yazma, mevcut yapılandırmalarınızı yedekten gelen verilerle değiştirecek. Güvenlik için yazıcı erişim kodları asla üzerine yazılmaz.`,cancel:`İptal`,processingBackup:`Yedek dosyası işleniyor...`,itemsRestored:`Geri Yüklenen Öğeler`,itemsSkipped:`Atlanan Öğeler`,restored:`Geri yüklendi`,skippedAlreadyExist:`Atlandı (zaten mevcut)`,filesCategory:`Dosyalar (3MF, küçük resimler, vb.)`,andMore:`...ve {{count}} daha`,newApiKeysGenerated:`Yeni API Anahtarları Oluşturuldu`,keysShownOnce:`Bu anahtarlar yalnızca bir kez gösterilir. Şimdi kopyalayın!`,copy:`Kopyala`,noDataFound:`Yedek dosyasında geri yüklenecek veri bulunamadı.`,close:`Kapat`,scheduledBackup:`Zamanlanmış Yedekler`,scheduledBackupDescription:`Zamanlamaya göre otomatik olarak yedek anlık görüntüleri oluşturun. Çıktı dizini bir NAS veya harici depolama alanına bağlanabilir.`,frequency:`Sıklık`,backupTime:`Saat`,retention:`Saklama`,retentionDescription:`Saklanacak yedek sayısı`,outputPath:`Çıktı Yolu`,outputPathPlaceholder:`Varsayılan: {{path}}`,outputPathDescription:`Varsayılan konum için boş bırakın`,runNow:`Şimdi Çalıştır`,backupFiles:`Yedek Dosyaları`,noScheduledBackups:`Henüz yedek yok`,deleteBackup:`Sil`,deleteBackupConfirm:`Bu yedek dosyası silinsin mi?`,backupRunning:`Yedekleme devam ediyor...`,scheduledBackupComplete:`Yedekleme başarıyla tamamlandı`,scheduledBackupFailed:`Yedekleme başarısız`,nextBackup:`Sonraki yedek`,backupSize:`Boyut`,localTimeHint:`Yerel saat ({{tz}})`,defaultPathLabel:`Varsayılan:`,pathCheck:{title:`Bambuddy bu dizine yazamıyor`,howToFix:`Nasıl düzeltilir:`,sandboxed:`Bambuddy servisi {{path}} dizinine yazamıyor. systemd birimi ProtectSystem=strict ile çalıştığı için kurulum, veri ve günlük dizinleri dışındaki her dizin servis açısından salt okunurdur - kendi kabuğunuzdan yazabildiğiniz bir dizin olsa bile.`,read_only:`{{path}} salt okunur bir dosya sisteminde.`,permission_denied:`Bambuddy'nin {{path}} dizinine yazma izni yok. Dizinin sahibini ve izinlerini kontrol edin.`,no_space:`{{path}} dizinini barındıran dosya sistemi dolu.`,not_a_directory:`{{path}} var ancak bir dizin değil.`,missing:`{{path}} yok ve oluşturulamadı.`,error:`Bambuddy {{path}} dizinine yazamıyor.`,ephemeralTitle:`Bu yedekler kapsayıcı yeniden oluşturulduğunda kaybolur`,container_ephemeral:`{{path}} ana makinede değil, Bambuddy kapsayıcısının içinde. Oraya yazılan yedekler kapsayıcı yeniden oluşturulduğunda kaybolur. Dizini ana makineden bağlayın:`},categories:{settings:`Ayarlar`,notification_providers:`Bildirim Sağlayıcıları`,notification_templates:`Bildirim Şablonları`,smart_plugs:`Akıllı Prizler`,printers:`Yazıcılar`,filaments:`Filamentler`,maintenance_types:`Bakım Türleri`,archives:`Arşivler`,projects:`Projeler`,pending_uploads:`Bekleyen Yüklemeler`,external_links:`Harici Bağlantılar`,api_keys:`API Anahtarları`}},tags:{title:`Etiketler`,addTag:`Etiket Ekle`,editTag:`Etiketi Düzenle`,deleteTag:`Etiketi Sil`,tagName:`Etiket Adı`,tagColor:`Etiket Rengi`,noTags:`Etiket yok`,deleteConfirm:`Bu etiketi silmek istediğinizden emin misiniz?`,manageTags:`Etiketleri Yönet`},uploadModal:{title:`3MF Dosyalarını Yükle`,dragDrop:`.3mf dosyalarını buraya sürükleyip bırakın`,or:`veya`,browseFiles:`Dosyalara Göz At`,extractionInfo:`Yazıcı modeli, 3MF dosya meta verilerinden otomatik olarak çıkarılacak.`,uploaded:`yüklendi`,failed:`başarısız`,uploading:`Yükleniyor...`,upload:`Yükle`,uploadFailed:`Yükleme başarısız`},editArchive:{title:`Arşivi Düzenle`,name:`Ad`,namePlaceholder:`Baskı adı`,printer:`Yazıcı`,noPrinter:`Yazıcı yok`,project:`Proje`,noProject:`Proje yok`,itemsPrinted:`Yazdırılan Öğeler`,itemsPrintedHelp:`Bu baskı işinde üretilen öğe sayısı. Tüm tabla bozulduysa 0 girin.`,filamentUsed:`Kullanılan filament (g)`,filamentUsedPlaceholder:`ör. 46.16`,filamentUsedHelp:`Bir baskı 3MF dosyası olmadan arşivlendiyse elle girin; böylece filament toplamlarına yine de dahil olur. 3MF dosyası olan bir arşiv yeniden tarandığında bu değer dosyadan yeniden okunur.`,notes:`Notlar`,notesPlaceholder:`Bu baskı hakkında notlar ekleyin...`,externalLink:`Harici Bağlantı`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Printables, Thingiverse veya başka bir kaynağa bağlantı`,tags:`Etiketler`,tagsPlaceholder:`Etiketler ekle...`,addMoreTags:`Daha fazla etiket ekle...`,matchingTags:`"{{query}}" ile eşleşen`,existingTags:`Mevcut etiketler`,clickToAdd:`(eklemek için tıklayın)`,status:`Durum`,failureReason:`Başarısızlık Nedeni`,selectReason:`Neden seç...`,photos:`Yazdırılan Sonuç Fotoğrafları`,photosHelp:`Yazdırılan sonuçunuzun fotoğraflarını eklemek için + tıklayın`,printResult:`Baskı sonucu`,saving:`Kaydediliyor...`,failureReasons:{adhesionFailure:`Yapışma başarısız`,spaghettiDetached:`Spagetti / Ayrılmış`,layerShift:`Katman kayması`,cloggedNozzle:`Tıkalı nozul`,filamentRunout:`Filament bitti`,warping:`Bükülme`,stringing:`İplik oluşumu`,underExtrusion:`Az ekstrüzyon`,powerFailure:`Güç kesintisi`,userCancelled:`Kullanıcı iptal etti`,noStatusUpdate:`Durum güncellemesi alınmadı`,other:`Diğer`},statuses:{completed:`Tamamlandı`,failed:`Başarısız`,aborted:`İptal edildi`,printing:`Yazdırılıyor`}},kProfiles:{title:`K-Profilleri`,noPrintersConfigured:`Yapılandırılmış Yazıcı Yok`,addPrinterInSettings:`K-profillerini yönetmek için Ayarlarda bir yazıcı ekleyin`,noActivePrinters:`Aktif Yazıcı Yok`,enablePrinterConnection:`K-profillerini görüntülemek için bir yazıcı bağlantısını etkinleştirin`,loadingProfiles:`K-Profilleri yükleniyor...`,printerOffline:`Yazıcı Çevrimdışı`,printerOfflineDesc:`Seçilen yazıcı bağlı değil. K-profillerini görüntülemek için açın.`,noMatchingProfiles:`Eşleşen Profil Yok`,noMatchingProfilesDesc:`Arama kriterlerinizle eşleşen profil yok`,noKProfiles:`K-Profili Yok`,noKProfilesDesc:`{{diameter}}mm nozul için basınç ilerleme profili bulunamadı`,createFirstProfile:`İlk Profili Oluştur`,printer:`Yazıcı`,nozzle:`Nozul`,refresh:`Yenile`,addProfile:`Profil Ekle`,export:`Dışa Aktar`,import:`İçe Aktar`,select:`Seç`,selectAll:`Tümünü Seç`,delete:`Sil`,searchPlaceholder:`Ad veya filamente göre ara...`,allExtruders:`Tüm Ekstrüderler`,leftOnly:`Yalnızca Sol`,rightOnly:`Yalnızca Sağ`,allFlow:`Tüm Akış`,hfOnly:`Yalnızca HF`,sOnly:`Yalnızca S`,sortName:`Sırala: Ad`,sortKValue:`Sırala: K-Değeri`,sortFilament:`Sırala: Filament`,leftExtruder:`Sol Ekstrüder`,rightExtruder:`Sağ Ekstrüder`,modal:{addTitle:`K-Profili Ekle`,editTitle:`K-Profilini Düzenle`,profileName:`Profil Adı`,profileNamePlaceholder:`PLA Profilim`,kValue:`K-Değeri`,kValuePlaceholder:`0.020`,kValueHelp:`Tipik aralık: PLA için 0.01 - 0.06, PETG için 0.02 - 0.10`,filament:`Filament`,selectFilament:`Filament seç...`,source:{local:`İçe aktarılmış`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Yerleşik`},noFilamentsHelp:`Kullanılabilir filament yok. Bambu Cloud’a giriş yapın veya Profiller → Yerel Profiller altından hızır ayarları içe aktarın.`,searchFilaments:`Filament ara...`,noFilamentMatches:`Bu aramayla eşleşen filament yok`,flowType:`Akış Türü`,highFlow:`Yüksek Akış`,standard:`Standart`,nozzleSize:`Nozul Boyutu`,extruder:`Ekstrüder`,extruders:`Ekstrüderler`,left:`Sol`,right:`Sağ`,notes:`Notlar (yerel olarak saklanır)`,notesPlaceholder:`Bu profil hakkında notlar ekleyin...`,notesHelp:`Notlar yazıcıda değil, Bambuddy'de kaydedilir`,syncing:`Yazıcıyla senkronize ediliyor...`,savingExtruder:`Ekstrüdere kaydediliyor {{current}}/{{total}}...`,pleaseWait:`Lütfen bekleyin`},deleteConfirm:{title:`Profili Sil`,cannotUndo:`Bu geri alınamaz`,message:`"{{name}}" yazıcıdan silmek istediğinizden emin misiniz?`},bulkDelete:{title:`Profilleri Sil`,cannotUndo:`Bu geri alınamaz`,message:`Yazıcıdan seçili {{count}} profili silmek istediğinizden emin misiniz?`},toast:{profileSaved:`K-profili kaydedildi`,profilesSaved:`{{count}} ekstrüdere K-profili kaydedildi`,selectAtLeastOneExtruder:`Lütfen en az bir ekstrüder seçin`,selectFilament:`Önce bir filament seçin`,filamentNotResolvable:`{{name}} için Bambu filament kimliği yok — yazıcı bunun için profil saklayamaz`,profileDeleted:`K-profili silindi`,profilesDeleted:`{{count}} profil silindi`,exportedProfiles:`{{count}} profil dışa aktarıldı`,importedProfiles:`{{total}} profilden {{count}} tanesi içe aktarıldı`,noProfilesToExport:`Dışa aktarılacak profil yok`,invalidFileFormat:`Geçersiz dosya formatı`,failedToParseImport:`İçe aktarma dosyası ayrıştırılamadı`,failedToSaveBatch:`K-profilleri kaydedilemedi`,noteSaved:`Not kaydedildi`,failedToSaveNote:`Not kaydedilemedi`},permission:{noRead:`Profilleri yenileme izniniz yok`,noCreate:`Profil ekleme izniniz yok`,noUpdate:`K-profillerini güncelleme izniniz yok`,noDelete:`K-profillerini silme izniniz yok`,noExport:`Profilleri dışa aktarma izniniz yok`,noImport:`Profilleri içe aktarma izniniz yok`}},virtualPrinter:{title:`Sanal Yazıcı`,running:`Çalışıyor`,stopped:`Durduruldu`,description:{default:`Bambu Studio ve OrcaSlicer'da görünen bir sanal yazıcı etkinleştirin. Bu yazıcıya gönderilen dosyalar yazdırılmadan doğrudan arşivlenecek.`,proxy:`Dilimleyici trafiğini gerçek bir yazıcıya ileten bir proxy etkinleştirin, böylece herhangi bir ağ üzerinden uzaktan baskı yapabilirsiniz.`},enable:{title:`Sanal Yazıcıyı Etkinleştir`,visibleInSlicer:`Dilimleyici keşfinde "Bambuddy" olarak görünür`,proxyingTo:`{{name}} cihazına proxy yapılıyor`,notActive:`Aktif değil`},model:{title:`Yazıcı Modeli`,description:`Öykünülecek yazıcı modelini seçin.`,restartWarning:`Modeli değiştirmek sanal yazıcıyı yeniden başlatacak`},accessCode:{title:`Erişim Kodu`,isSet:`Erişim kodu ayarlandı`,notSet:`Erişim kodu ayarlanmadı - etkinleştirmek için gerekli`,placeholder:`8 karakterli kodu girin`,placeholderChange:`Değiştirmek için yeni kodu girin`,hint:`Tam olarak 8 karakter olmalı. Dilimleyiciler tarafından kimlik doğrulama için kullanılır.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Hedef yazıcıdan devralındı`,derivedFromTargetHint:`Hedef yazıcının erişim kodunu kullanır. Köprü, dilimleyicinin kimlik doğrulamasını gerçek yazıcıya iletir, bu nedenle kodlar eşleşmelidir — değiştirmek için yazıcının ayarlarında erişim kodunu düzenleyin.`,reveal:`Erişim kodunu göster`,hide:`Erişim kodunu gizle`},targetPrinter:{title:`Hedef Yazıcı`,configured:`Proxy hedefi yapılandırıldı`,notConfigured:`Hedef yazıcı seçilmedi - proxy modu için gerekli`,placeholder:`Bir yazıcı seçin...`,hint:`Dilimleyici trafiğine proxy yapmak için yazıcıyı seçin. Yazıcı LAN modunda olmalıdır.`,noPrinters:`Yapılandırılmış yazıcı yok. Proxy modunu kullanmak için önce bir yazıcı ekleyin.`},remoteInterface:{title:`Ağ Arayüzü Geçersiz Kılma`,configured:`Arayüz geçersiz kılma aktif`,optional:`İsteğe bağlı - otomatik algılanan IP yanlışsa kullanın (örn. birden fazla NIC, Docker, VPN)`,placeholder:`Otomatik algıla (varsayılan)...`,hint:`SSDP üzerinden tanıtılan ve TLS sertifikasında kullanılan IP adresini geçersiz kıl. Bambuddy birden fazla ağ arayüzüne sahip olduğunda kullanışlıdır.`},mode:{title:`Mod`,archive:`Arşiv`,archiveDesc:`Dosyaları hemen arşivle`,review:`İnceleme`,reviewDesc:`Arşivlemeden önce incele`,queue:`Kuyruk`,queueDesc:`Arşivle ve kuyruğa ekle`,proxy:`Proxy`,proxyDesc:`Gerçek yazıcıya ilet`},autoDispatch:{title:`Otomatik sevk`,description:`Kuyruğa eklendiğinde baskıları otomatik olarak başlat. Kapalıyken, baskılar manuel sevki bekler.`},queueForceColorMatch:{title:`Renk eşleşmesini zorla`,description:`Tam olarak doğru filament türü ve rengi yüklü olmayan bir yazıcıya sevk etmeyi reddet. Varsayılan olarak kapalı — bu olmadan kuyruk yalnızca model eşleşmesi kullanır ve yanlış renk yüklü bir yazıcı seçebilir.`},saveAmsMapping:{title:`AMS eşlemesini kaydet`,description:`Dilimleyicinin kendi seçtiği AMS yuvasını (project_file MQTT komutundan) arşive kalıcı olarak kaydeder, böylece daha sonraki bir yeniden yazdırma dosyanın türünden/renginden yeniden türetmek yerine tam olarak aynı fiziksel makarayı yeniden kullanır. Varsayılan olarak kapalı.`},gcodeInjection:{title:`G-code enjeksiyonu`,description:`Ayarlar'da model bazında yapılandırılan G-code parçacıklarını bu VP'nin işlerine uygular. Varsayılan olarak kapalı.`},tailscaleDisabled:{title:`Tailscale entegrasyonu`,description:`Bu VP'yi Tailscale üzerinden açıkta olarak işaretlemek için etkinleştirin. Dilimleyiciye hangi IP'yi yapıştıracağınızı bilmeniz için ana bilgisayarın Tailscale adresini gösterir. CA içe aktarma adımı değişmedi — bu anahtarın sertifikalar üzerinde etkisi yoktur.`},setupRequired:{title:`Kurulum Gerekli`,description:`Sanal yazıcı özelliği çalışmadan önce ek sistem yapılandırması gerektirir. Bu, port yönlendirme, güvenlik duvarı kuralları ve platforma özgü ayarları içerir.`,readGuide:`Etkinleştirmeden önce kurulum kılavuzunu okuyun`},archiveNameSource:{title:`Arşiv ad kaynağı`,description:`Dosyalar sanal yazıcı aracılığıyla geldiğinde yeni arşivlerin nasıl adlandırılacağını seçin. "Meta veri" 3MF'den dilimleyici-gömülü başlığı kullanır (varsayılan). "Dosya adı" Bambu Studio'nun FTP üzerinden gönderdiği dosya adını kullanır. Not: Bambu Studio, 3MF'de bir Başlık alanı varsa "yazıcıya gönder" iletişim kutusunda yazdığınız adı bu alanla geçersiz kılar, bu nedenle her iki mod da genellikle aynı dizeyi üretir.`,metadata:`Meta veri`,filename:`Dosya adı`},caCert:{title:`Dilimleyici sertifikası`,description:`Sanal yazıcılar Bambuddy CA tarafından imzalanmış bir TLS sertifikası kullanır. Bağlantıyı kabul etmesi için bu CA sertifikasını dilimleyicinizin güven deposuna bir kez içe aktarın — komut satırından kopyalamaya gerek yok.`,copy:`Kopyala`,copied:`Kopyalandı`,download:`İndir`,fingerprint:`SHA-256`},howItWorks:{title:`Nasıl çalışır`,step1:`Aynı LAN'da, sanal yazıcılar dilimleyicinizde (Bambu Studio / OrcaSlicer) keşif yoluyla otomatik olarak görünür. Diğer ağlardan, IP adresi ve erişim koduyla manuel olarak ekleyin.`,step2:`3MF dosyalarını Bambuddy'ye yüklemek için Arşiv, İnceleme ve Kuyruk modlarında dilimleyicinizdeki "Gönder" düğmesini kullanın. Dilimleyici "Baskı başarılı" gösterecek — dosya saklanır, yazdırılmaz.`,step3:`Proxy modunda, sanal yazıcı tüm trafiği gerçek bir yazıcıya iletir — baskılar doğrudan bağlıymış gibi hemen başlar.`},status:{title:`Durum Ayrıntıları`,printerName:`Yazıcı Adı`,model:`Model`,serialNumber:`Seri Numarası`,mode:`Mod`,pendingFiles:`Bekleyen Dosyalar`,targetPrinter:`Hedef Yazıcı`,ftpPort:`FTP Portu`,mqttPort:`MQTT Portu`,ftpConnections:`FTP Bağlantıları`,mqttConnections:`MQTT Bağlantıları`},toast:{updated:`Sanal yazıcı ayarları güncellendi`,failedToUpdate:`Ayarlar güncellenemedi`,copyFailed:`Kopyalama başarısız — metni manuel olarak seçmeyi deneyin`,accessCodeRequired:`Lütfen önce bir erişim kodu ayarlayın`,targetPrinterRequired:`Lütfen önce bir hedef yazıcı seçin`,bindIpRequired:`Lütfen önce bir bind IP'si ayarlayın`,accessCodeEmpty:`Erişim kodu boş olamaz`,accessCodeLength:`Erişim kodu tam olarak 8 karakter olmalı`,targetCodeChangedRebind:`Erişim kodu artık yeni hedef yazıcıyla eşleşiyor. Yeni kodu almak için bu cihazı dilimleyicinizde yeniden ekleyin.`,created:`Sanal yazıcı oluşturuldu`,failedToCreate:`Sanal yazıcı oluşturulamadı`,deleted:`Sanal yazıcı silindi`,failedToDelete:`Sanal yazıcı silinemedi`},list:{title:`Sanal Yazıcılar`,add:`Ekle`,addFirst:`Sanal Yazıcı Ekle`,empty:`Yapılandırılmış sanal yazıcı yok. Başlamak için bir tane ekleyin.`},bindIp:{title:`Bind Arayüzü`,placeholder:`Arayüz seç...`,hint:`Bu sanal yazıcının bağlanacağı ağ arayüzü. Yazıcı başına benzersiz olmalıdır.`},proxy:{accessCodeHint:`Proxy modunda, dilimleyicide hedef yazıcınızın erişim kodunu kullanın. Bağlantı şeffaf olarak gerçek yazıcıya iletilir.`},addDialog:{title:`Sanal Yazıcı Ekle`,name:`Ad`,hint:`Oluşturduktan sonra erişim kodunu, hedef yazıcıyı ve diğer ayarları yapılandırabilirsiniz.`,create:`Oluştur`},deleteConfirm:{title:`Sanal Yazıcıyı Sil`,message:`"{{name}}" silmek istediğinizden emin misiniz? Bu, bu yazıcı için tüm servisleri durduracak.`}},modelViewer:{openInSlicer:`Dilimleyicide Aç`,openInSlicerWith:`{{slicer}} ile aç`,moreSlicerOptions:`Diğer dilimleyici seçenekleri`,openInSlicerFailed:`Dilimleyicide açılamadı`,tabs:{model:`3B Model`},notAvailable:`mevcut değil`,plates:`Plakalar`,allPlates:`Tüm Plakalar`,plateNumber:`Plaka {{number}}`,plateCount:`{{count}} plaka`,plateCount_other:`{{count}} plaka`,objectCount:`{{count}} nesne`,objectCount_other:`{{count}} nesne`,filamentCount:`{{count}} filament`,filamentCount_other:`{{count}} filament`,eta:`ETA {{minutes}} dk`,noPreview:`Bu dosya için önizleme yok`,pagination:{pageOf:`{{total}} sayfadan {{current}} tanesi`,prev:`Önceki`,next:`Sonraki`},errors:{failedToLoad:`Dosya yüklenemedi`,noMeshes:`3MF dosyasında ağ bulunamadı`,unsupportedFormat:`Desteklenmeyen dosya formatı`}},maintenanceDescriptions:{lubricateCarbonRods:`Düzgün hareket için karbon çubuklara yağ uygula`,lubricateRails:`Düzgün hareket için lineer raylara yağ uygula`,cleanNozzle:`Tıkanmaları önlemek için hotend ve nozulu temizle`,checkBelts:`Doğru baskılar için kayış gerginliğini kontrol et`,cleanBuildPlate:`Daha iyi yapışma için baskı plakasını temizle`,checkExtruder:`Aşınma için ekstrüder dişlilerini inceleyin`,checkCooling:`Soğutma fanlarının düzgün çalıştığından emin ol`,generalInspection:`Genel yazıcı denetimi`,cleanCarbonRods:`Sürtünmeyi azaltmak için karbon çubukları temizle`,lubricateSteelRods:`Düzgün hareket için çelik çubuklara yağ uygula`,cleanSteelRods:`Sürtünmeyi azaltmak için çelik çubukları temizle`,cleanLinearRails:`Toz ve kalıntıları temizlemek için lineer rayları sil`,checkPtfeTube:`Aşınma veya hasar için PTFE tüpünü incele`,replaceHepaFilter:`Hava kalitesi için HEPA filtresini değiştir`,replaceCarbonFilter:`Aktif karbon filtresini değiştir`,lubricateLeftNozzleRail:`Sol nozul rayını yağla (H2 serisi)`},haSensors:{label:`Sensörler`,unavailable:`Kullanılamıyor`,blocksPrints:`{{entity}} — uyarı sürerken baskıları bekletir`,states:{open:`Açık`,closed:`Kapalı`,unlocked:`Kilit açık`,locked:`Kilitli`,detected:`Algılandı`,clear:`Temiz`,wet:`Islak`,dry:`Kuru`,problem:`Sorun`,ok:`Normal`,running:`Çalışıyor`,stopped:`Durdu`,on:`Açık`,off:`Kapalı`},sectionTitle:`Home Assistant Sensörleri (Yazıcılar)`,add:`Sensör ekle`,addTitle:`Home Assistant sensörü ekle`,editTitle:`Home Assistant sensörünü düzenle`,empty:`Henüz sensör yok. Yazıcı kartında göstermek için Home Assistant'tan bir kapı kontağı veya termometre bağlayın.`,unknownPrinter:`Bilinmeyen yazıcı`,badgeBlocks:`Baskıları bekletir`,badgeNotifies:`Bildirir`,badgeHidden:`Kartta gizli`,printer:`Yazıcı`,entity:`Varlık`,searchPlaceholder:`Varlık ara...`,noEntities:`Eşleşen varlık yok`,name:`Görünen ad`,alertWhen:`Şu durumda uyar`,alertNever:`Asla — yalnızca göster`,alertAbove:`Şunun üstünde`,alertBelow:`Şunun altında`,alertHint:`Uyarı durumu sensörü yazıcı kartında vurgular ve aşağıdaki seçenekleri etkinleştirir.`,showOnCard:`Yazıcı kartında göster`,notifyOnAlert:`Uyarı başladığında bildirim gönder`,blockPrint:`Uyarı sürerken kuyruktaki baskıları beklet`,blockPrintHint:`İşler kuyrukta kalır ve sensör normale döndüğünde kendiliğinden başlar. Home Assistant'a ulaşılamadığı sürece yok sayılır.`,toast:{created:`Sensör eklendi`,updated:`Sensör kaydedildi`,deleted:`Sensör kaldırıldı`},error:{pickEntity:`Bir Home Assistant varlığı seçin`,nameRequired:`Bir görünen ad girin`,printerRequired:`Bir yazıcı seçin`,alertRequired:`Önce bir uyarı koşulu belirleyin`}},locationHaSensors:{sectionTitle:`Home Assistant Sensörleri (Depolama Konumları)`,sectionDescription:`Filament kartında ve tabloda canlı değerleri göstermek için Home Assistant sıcaklık, nem veya pil sensörlerini depolama konumlarınıza bağlayın. Konum başına kategori başına yalnızca bir sensöre izin verilir.`,add:`Sensör ekle`,addTitle:`Home Assistant sensörü ekle`,editTitle:`Home Assistant sensörünü düzenle`,empty:`Henüz sensör yok. Filament kartında göstermek için Home Assistant'tan bir sıcaklık veya nem sensörü bağlayın.`,unknownLocation:`Bilinmeyen konum`,location:`Depolama Konumu`,showOnCard:`Filament kartında göster`,overwriteConfirm:{title:`Mevcut sensör değiştirilsin mi?`,messageTemperature:`"{{location}}" konumunda zaten bağlı bir sıcaklık sensörü var: {{name}}. Devam etmek onu değiştirecek.`,messageHumidity:`"{{location}}" konumunda zaten bağlı bir nem sensörü var: {{name}}. Devam etmek onu değiştirecek.`,messageBattery:`"{{location}}" konumunda zaten bağlı bir pil sensörü var: {{name}}. Devam etmek onu değiştirecek.`},autoAdd:{confirmTitle:`Diğer sensörler de eklensin mi?`,confirmMessage:`Bambuddy bu konum için başka sensörler de buldu. Eklemek istediklerinizi seçin.`,added:`Ayrıca eklendi: {{names}}`,noneFound:`Bu konum için eşleşen sıcaklık, nem veya pil sensörü bulunamadı.`,onlyThisOne:`Sadece bunu`},options:{buttonLabel:`Sensör seçenekleri`,title:`Konum Sensörü Seçenekleri`,description:`Bu değerler, bir konumun ilk sensörüyle birlikte bir sıcaklık, nem veya pil sensörü otomatik olarak bağlandığında kullanılır.`,generalSettings:`Genel ayarlar`,pollInterval:`Güncelleme aralığı (saniye)`,pollIntervalHint:`Bambuddy'nin Home Assistant'ı ne sıklıkla sorgulayıp ekrandaki sensör değerlerini güncellediği. Minimum 60 saniye.`,colorizeValues:`Sensör değerlerini uyarı eşiklerine göre renklendir`,aboveColor:`Eşik üstü rengi`,belowColor:`Eşik altı rengi`,optimalColor:`Optimal değer rengi`,colors:{red:`Kırmızı`,orange:`Turuncu`,yellow:`Sarı`,green:`Yeşil`,blue:`Mavi`,purple:`Mor`,pink:`Pembe`},saved:`Seçenekler kaydedildi`,saveFailed:`Seçenekler kaydedilemedi`,reset:`Sıfırla`,resetConfirm:{title:`Mevcut tüm konum sensörleri sıfırlansın mı?`,message:`Bu işlem, mevcut tüm konum sıcaklık, nem ve pil sensörlerinin uyarı eşiklerini, bildirimlerini ve kart görünürlüğünü yukarıda yapılandırılan değerlerle üzerine yazar ve her sensörün adını Home Assistant'taki dost adına geri yükler — yazıcı sensörleri etkilenmez. Bu işlem geri alınamaz. Sensör sayısına bağlı olarak bu işlem biraz zaman alabilir.`},resetDone:`{{count}} konum sensörüne uygulandı`,resetFailed:`Konum sensörleri sıfırlanamadı`},deleteAllConfirm:{title:`Tüm sensörler silinsin mi?`,message:`"{{location}}" konumuna bağlı tüm {{count}} sensör silinecek. Bu işlem geri alınamaz.`},currentlyBound:`Şu anda bağlı: {{entity}}`,error:{locationRequired:`Bir depolama konumu seçin`},toast:{created:`Sensör eklendi`,updated:`Sensör kaydedildi`,deleted:`Sensör kaldırıldı`}},smartPlugs:{offline:`Çevrimdışı`,admin:`Yönetici`,openPlugAdminPage:`Priz yönetici sayfasını aç`,deleteSmartPlug:`Akıllı Prizi Sil`,turnOnSmartPlug:`Akıllı Prizi Aç`,turnOffSmartPlug:`Akıllı Prizi Kapat`,turnOn:`Aç`,turnOff:`Kapat`,addSmartPlug:{scanningNetwork:`Ağ taranıyor...`,chooseEntity:`Bir varlık seçin...`,connectionFailed:`Bağlantı başarısız`,searchEntities:`Varlıklarda ara...`,searchPowerSensors:`Güç sensörlerinde ara...`,searchEnergySensors:`Enerji sensörlerinde ara...`,placeholders:{plugName:`Oturma Odası Prizi`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Güç konusuyla aynı veya farklı`}},linkedTo:`Bağlı:`,monitorOnly:`Yalnızca İzle`,alerts:`Uyarılar`,scheduleOn:`{{time}} Açık`,scheduleOff:`{{time}} Kapalı`,on:`Açık`,off:`Kapalı`,power:`Güç`,kwhToday:`Bugün kWh`,settings:`Ayarlar`,automationSettings:`Otomasyon Ayarları`,showInSwitchbar:`Anahtar Çubuğunda Göster`,quickAccessSidebar:`Kenar çubuğundan hızlı erişim`,enabled:`Etkin`,enableAutomation:`Bu priz için otomasyonu etkinleştir`,autoOn:`Otomatik Aç`,autoOnDescription:`Baskı başladığında aç`,autoOff:`Otomatik Kapat`,autoOffDescription:`Baskı tamamlandığında kapat (tek seferlik)`,autoOffPersistent:`Etkin Tut`,autoOffPersistentDescription:`Tek seferlik yerine baskılar arasında etkin kal`,controlsPrinterPower:`Yazıcıya güç veriyor`,controlsPrinterPowerDescription:`Bu priz yalnızca bir aksesuara (filtre fanı, aydınlatma) güç veriyorsa kapatın. Aksi halde prizi kapatmak yazıcıyı çevrimdışı olarak işaretler.`,autoOffAfterDrying:`Kurutmadan Sonra Otomatik Kapat`,autoOffAfterDryingDescription:`AMS kurutması tamamlandığında kapat`,delayAfterDryingMinutes:`Kurutma gecikmesi (dakika)`,turnOffDelayMode:`Kapatma Gecikme Modu`,time:`Süre`,temp:`Sıcaklık`,delayMinutes:`Gecikme (dakika)`,tempThreshold:`Sıcaklık eşiği (°C)`,tempThresholdDescription:`Nozul bu sıcaklığın altına soğuduğunda kapanır`,edit:`Düzenle`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz? Bu geri alınamaz.`,turnOnConfirm:`"{{name}}" açmak istediğinizden emin misiniz?`,turnOffConfirm:`"{{name}}" kapatmak istediğinizden emin misiniz? Bu, bağlı cihazın gücünü kesecek.`,failedToTurn:`"{{name}}" {{action}} başarısız`,unknown:`Bilinmiyor`,addTitle:`Akıllı Priz Ekle`,editTitle:`Akıllı Prizi Düzenle`,stopScanning:`Taramayı Durdur`,discoverTasmota:`Tasmota Cihazlarını Keşfet`,foundDevices:`{{count}} cihaz bulundu - seçmek için tıklayın:`,noDevicesFound:`Ağınızda Tasmota cihazı bulunamadı`,haNotConfigured:`Home Assistant yapılandırılmamış. Şuradan ayarlayın:`,haSettingsPath:`Ayarlar → Ağ → Home Assistant`,selectEntity:`Varlık Seç *`,ipAddress:`IP Adresi *`,nameLabel:`Ad *`,username:`Kullanıcı Adı`,password:`Parola`,authHint:`Tasmota cihazınız kimlik doğrulama gerektirmiyorsa boş bırakın`,linkToPrinter:`Yazıcıya Bağla`,noPrinter:`Yazıcı yok (yalnızca manuel kontrol)`,linkingDescription:`Bağlama, baskılar başladığında/tamamlandığında otomatik açma/kapamayı etkinleştirir`,powerAlerts:`Güç Uyarıları`,alertAbove:`Üstündeyse uyar (W)`,alertBelow:`Altındaysa uyar (W)`,alertDescription:`Güç tüketimi bu eşikleri geçtiğinde bildirim alın. O yönü devre dışı bırakmak için boş bırakın.`,dailySchedule:`Günlük Zamanlama`,turnOnAt:`Şu saatte aç`,turnOffAt:`Şu saatte kapat`,scheduleDescription:`Prizi günlük olarak bu saatlerde otomatik aç/kapat. O eylemi atlamak için boş bırakın.`,showOnPrinterCard:`Yazıcı Kartında Göster`,displayOnPrinterCard:`Yazıcı kartında düğme göster`,connectedResult:`Bağlandı!`,deviceLabel:`Cihaz: {{name}} - `,stateLabel:`Durum: {{state}}`,test:`Test`,delete:`Sil`,save:`Kaydet`,add:`Ekle`,cancel:`İptal`,failedToStartScan:`Tarama başlatılamadı`,nameRequired:`Ad gerekli`,entityRequired:`Home Assistant prizleri için varlık gerekli`,mqttTopicRequired:`Güç, enerji veya durum izleme için en az bir MQTT konusu yapılandırılmalı`,loadingEntities:`Varlıklar yükleniyor...`,loading:`Yükleniyor...`,failedToLoadEntities:`Varlıklar yüklenemedi: {{error}}`,noEntitiesMatching:`"{{search}}" ile eşleşen varlık bulunamadı`,noEntitiesAvailable:`Kullanılabilir varlık yok`,searchingEntities:`Tüm varlıklar aranıyor ({{count}} bulundu)`,showingEntities:`switch, light, input_boolean gösteriliyor ({{count}} mevcut)`,energyMonitoringOptional:`Enerji İzleme (İsteğe Bağlı)`,energyMonitoringHint:`Güç/enerji verisi sağlayan sensörleri arayın ve seçin.`,powerSensorW:`Güç Sensörü (W)`,energyTodayKwh:`Bugünkü Enerji (kWh)`,totalEnergyKwh:`Toplam Enerji (kWh)`,noMatchingSensors:`Eşleşen sensör yok`,none:`Hiçbiri`,mqttNotConfigured:`MQTT brokerı yapılandırılmamış. Şurada broker adresini ayarlayın:`,mqttSettingsPath:`Ayarlar → Ağ → MQTT Yayınlama`,mqttNotConfiguredSuffix:`(yayınlamayı etkinleştirmenize gerek yok, yalnızca broker ayrıntılarını doldurun).`,mqttMonitorOnlyDescription:`MQTT prizleri MQTT aboneliği aracılığıyla güç/enerji verisi alır. Açma/kapama kontrolü kullanılamaz - MQTT brokerınızı veya ev otomasyon sisteminizi kullanın.`,powerMonitoring:`Güç İzleme`,energyMonitoring:`Enerji İzleme`,stateMonitoring:`Durum İzleme`,optional:`isteğe bağlı`,topic:`Konu`,jsonPath:`JSON Yolu`,multiplier:`Çarpan`,onValue:`ON Değeri`,mqttPowerHint:`JSON yolu JSON yükten değer çıkarır (örn., "power_l1"). Konu ham sayısal değerler yayınlıyorsa boş bırakın.
+PÅ-värde: den exakta strängen som betyder "PÅ". Lämna tomt för auto-upptäckt (PÅ, true, 1).`,restControl:`Kontroll`,restOnUrl:`Sätt PÅ-URL`,restOffUrl:`Sätt AV-URL`,restOnBody:`PÅ-förfrågningsinnehåll`,restOffBody:`AV-förfrågningsinnehåll`,restMethod:`HTTP-metod`,restHeaders:`Anpassade huvuden (JSON)`,restStatusUrl:`Status-URL`,restStatusPath:`Status JSON-sökväg`,restStatusOnValue:`PÅ-värde`,restPowerUrl:`Effekt-URL`,restPowerPath:`Effekt JSON-sökväg`,restPowerMultiplier:`Effektmultiplikator`,restEnergyUrl:`Energi-URL`,restEnergyPath:`Energi JSON-sökväg (idag)`,restEnergyTotalPath:`Energi JSON-sökväg (livstid)`,restEnergyTotalMultiplier:`Livstidsmultiplikator`,restEnergyTotalPathHint:`t.ex. aenergy.total`,restEnergyTotalHint:`Många kontakter — varje Shelly bland dem — rapporterar endast en livstidsräknare som aldrig nollställs. Den hör hit, inte i fältet ovan: läs som dagens användning skulle den aldrig nollställas vid midnatt, och Igår och Totalt skulle förbli tomma. Bambuddy beräknar Idag och Igår utifrån den, vilket tar en eller två dagars avläsningar att fylla i. En Shelly rapporterar wattimmar, så använd en multiplikator på 0,001.`,restEnergyMultiplier:`Energimultiplikator`,restUrlRequired:`Minst en URL (PÅ eller AV) krävs för REST-kontakter`,restHeadersHint:`t.ex. {"Authorization": "Bearer din-token"}`,restBodyHint:`t.ex. PÅ, {"state": "on"}`,restStatusHint:`URL för att hämta aktuell status`,restPathHint:`t.ex. state eller data.power.status`,restPowerUrlHint:`Separat URL för effektdata (använder Status-URL om tom)`,restEnergyUrlHint:`Separat URL för energidata (använder Status-URL om tom)`,restEnergyHint:`Varje värde kan använda sin egen URL eller falla tillbaka till Status-URL. Använd multiplikatorer för enhetsomvandling (t.ex. 0,001 för att konvertera Wh till kWh).`,testConnection:`Testa anslutning`,connectionSuccess:`Anslutning lyckades`,noSwitchesInSwitchbar:`Inga växlar i kontaktpanelen`,enableSwitchbarHint:`Aktivera "Visa i kontaktpanel" i Inställningar > Kontakter`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`E-post`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`SMTP e-postnotiser`,telegram:`Notiser via Telegram-bot`,discord:`Skicka till Discord-kanal via webhook`,ntfy:`Gratis, självhostade pushnotiser`,pushover:`Enkla, pålitliga pushnotiser`,callmebot:`Gratis WhatsApp-notiser via CallMeBot`,webhook:`Generisk HTTP POST till valfri URL`,homeassistant:`Permanenta notiser i Home Assistant-instrumentpanel`,bark:`iOS push-notiser via Bark (självhostbar)`},lastSuccess:`Senast: {{date}}`,error:`Fel`,printer:`Skrivare:`,allPrinters:`Alla skrivare`,sendTestNotification:`Skicka testnotis`,eventSettings:`Händelseinställningar`,enabled:`Aktiverad`,sendFromProvider:`Skicka notiser från denna leverantör`,printEvents:`Utskriftshändelser`,printerStatus:`Skrivarstatus`,amsAlarms:`AMS-larm`,amsHtAlarms:`AMS-HT-larm`,printQueue:`Utskriftskö`,start:`Start`,plateCheck:`Plattkontroll`,complete:`Slutförd`,failed:`Misslyckad`,stopped:`Stoppad`,progress:`Förlopp`,offline:`Offline`,lowFilament:`Lågt filament`,maintenance:`Underhåll`,amsHumidity:`AMS-luftfuktighet`,amsTemp:`AMS-temperatur`,amsDryingSuspended:`Torkning pausad`,amsHtHumidity:`AMS-HT-luftfuktighet`,amsHtTemp:`AMS-HT-temperatur`,bedCooled:`Byggplatta kyld`,firstLayer:`Första skikt`,quiet:`Tyst`,digest:`Sammanfattning {{time}}`,printStarted:`Utskrift startad`,plateNotEmpty:`Platta inte tom`,plateNotEmptyDescription:`Objekt upptäckta före utskrift`,plateClearRequired:`Platt-rensning krävs`,plateClearRequiredDescription:`Utskrift slutförd, kön väntar på plattbekräftelse`,plateClear:`Platta rensad`,printCompleted:`Utskrift slutförd`,bedCooledLabel:`Byggplatta kyld`,bedCooledDescription:`Byggplattan kyld under tröskelvärdet efter utskrift`,firstLayerCompleteLabel:`Första skikt klart`,firstLayerCompleteDescription:`Notis med ögonblicksbild när första skiktet är klart`,missingSpoolAssignmentLabel:`Rulltilldelning saknas`,billingChargeFailedLabel:`Faktureringsavgift misslyckades`,billingChargeFailedDescription:`Notis när utskriftskostnader inte kunde registreras`,missingSpoolAssignmentDescription:`Notis när utskrift startar och nödvändiga fack saknar tilldelad rulle`,printFailed:`Utskrift misslyckades`,printStopped:`Utskrift stoppad`,progressMilestones:`Förloppsmilstolpar`,progressMilestonesDescription:`Notis vid 25%, 50%, 75%`,printerOffline:`Skrivare offline`,printerError:`Skrivarfel`,aiFailureDetection:`AI-felsdetektering`,aiFailureDetectionDescription:`Notis när Obico AI upptäcker ett möjligt utskriftsfel`,lowFilamentLabel:`Lågt filament`,maintenanceDue:`Underhåll förfallit`,maintenanceDueDescription:`Notis när underhåll behövs`,amsHumidityHigh:`Hög AMS-luftfuktighet`,amsHumidityHighDescription:`AMS-luftfuktighet överskrider tröskelvärdet`,amsTemperatureHigh:`Hög AMS-temperatur`,amsTemperatureHighDescription:`AMS-temperatur överskrider tröskelvärdet`,amsDryingSuspendedTitle:`Auto-torkning pausad`,amsDryingSuspendedDescription:`Automatisk torkning avbröts för en AMS-enhet eftersom luftfuktigheten aldrig sjönk under tröskelvärdet`,amsHtHumidityHigh:`Hög AMS-HT-luftfuktighet`,amsHtHumidityHighDescription:`AMS-HT-luftfuktighet överskrider tröskelvärdet`,amsHtTemperatureHigh:`Hög AMS-HT-temperatur`,amsHtTemperatureHighDescription:`AMS-HT-temperatur överskrider tröskelvärdet`,inventoryAlerts:`Lagerlarm`,stockReorderAlert:`Påfyllningslarm`,stockReorderAlertDescription:`Artikel har nått sin påfyllningsnivå`,stockBreakAlert:`Lagerslutslarm`,stockBreakAlertDescription:`Lagret kommer att ta slut innan påfyllning ankommer`,jobAdded:`Jobb tillagt`,jobAddedDescription:`Jobb tillagt i kön`,jobAssigned:`Jobb tilldelat`,jobAssignedDescription:`Modellbaserat jobb tilldelat till skrivare`,jobStarted:`Jobb startat`,jobStartedDescription:`Köjobb startade utskrift`,jobWaiting:`Jobb väntar`,jobWaitingDescription:`Jobb väntar på filament eller skrivare`,jobSkipped:`Jobb hoppades över`,jobSkippedDescription:`Jobb hoppades över (föregående misslyckades)`,jobFailed:`Jobb misslyckades`,jobFailedDescription:`Jobb kunde inte starta`,queueComplete:`Kö slutförd`,queueCompleteDescription:`Alla köjobb slutförda`,quietHours:`Tysta timmar`,noNotificationsDuring:`Inga notiser under dessa timmar`,editProviderToChangeQuietHours:`Redigera leverantör för att ändra tysta timmar`,dailyDigest:`Daglig sammanfattning`,batchNotifications:`Samla notiser till en daglig sammanfattning`,sendAt:`Skicka klockan {{time}}`,editProviderToChangeDigestTime:`Redigera leverantör för att ändra sammanfattningstid`,edit:`Redigera`,deleteProvider:`Ta bort notisleverantör`,deleteConfirm:`Är du säker på att du vill ta bort "{{name}}"? Detta kan inte ångras.`,delete:`Ta bort`,addTitle:`Lägg till notisleverantör`,editTitle:`Redigera notisleverantör`,nameLabel:`Namn *`,namePlaceholder:`Mina notiser`,providerTypeLabel:`Leverantörstyp *`,configuration:`Konfiguration`,testConfiguration:`Testa konfiguration`,printerFilter:`Skrivarfilter`,onlyFromPrinter:`Skicka notiser endast för händelser från denna skrivare`,quietHoursDnd:`Tysta timmar (Stör ej)`,quietStart:`Start`,quietEnd:`Slut`,dailyDigestLabel:`Daglig sammanfattning`,sendDigestAt:`Skicka sammanfattning klockan`,digestCollected:`Händelser kommer att samlas och skickas som en sammanfattning vid denna tid`,notificationEvents:`Notishändelser`,progressPercent:`(25%, 50%, 75%)`,bedCooledAfterPrint:`(efter utskrift slutförs)`,haSensorAlert:`Sensorlarm`,haSensorAlertDescription:`(en kopplad Home Assistant-sensor behöver uppmärksamhet)`,locationHaSensorAlert:`Sensorlarm för lagringsplats`,locationHaSensorAlertDescription:`(en Home Assistant-sensor som är kopplad till en lagringsplats behöver uppmärksamhet)`,eventPriority:{sectionTitle:`ntfy-prioritet`,helpNtfy:`Välj en prioritet för varje aktiverad händelse. ntfy använder dessa för att eskalera larm (ljud, synlighet, push-beteende). Nivåer som inte sätts här använder ntfy-serverns standard.`,min:`Min`,low:`Låg`,default:`Standard`,high:`Hög`,urgent:`Brådskande`},cancel:`Avbryt`,save:`Spara`,add:`Lägg till`,nameRequired:`Namn krävs`,fieldRequired:`{{field}} krävs`,haDataInvalid:`Data-fältet måste vara ett giltigt JSON-objekt, t.ex. {"priority": "high", "ttl": 0}`,phoneNumber:`Telefonnummer`,apiKey:`API-nyckel`,serverUrl:`Server-URL`,topic:`Ämne`,authToken:`Autentiseringstoken`,userKey:`Användarnyckel`,appToken:`App-nyckel`,priority:`Prioritet`,pushoverRetry:`Nödåterförsök (s)`,pushoverExpire:`Nödutgång (s)`,botToken:`Bot-token`,chatId:`Chat-ID`,telegramThreadId:`Forumämnes-ID`,telegramThreadIdHelp:`Valfritt. Skickar till ett enda ämne i en forumgrupp — det sista numret i ämneslänken (t.me/c/.../25). Lämna tomt för det allmänna ämnet.`,telegramThreadIdInvalid:`Forumämnes-ID måste vara ett nummer.`,smtpServer:`SMTP-server`,smtpPort:`SMTP-port`,security:`Säkerhet`,authentication:`Autentisering`,username:`Användarnamn`,password:`Lösenord`,fromEmail:`Från e-post`,toEmail:`Till e-post`,webhookUrl:`Webhook-URL`,payloadFormat:`Nyttolastsformat`,authorization:`Autorisation`,titleFieldName:`Titel-fältnamn`,messageFieldName:`Meddelande-fältnamn`,editTemplate:`Redigera mall: {{name}}`,titleLabel:`Titel`,bodyLabel:`Brödtext`,titlePlaceholder:`Notistitel...`,bodyPlaceholder:`Notisbrödtext...`,availableVariables:`Tillgängliga variabler`,clickToInsert:`Klicka för att infoga vid markörpositionen i brödtext`,livePreview:`Live-förhandsvisning`,hide:`Dölj`,show:`Visa`,loadingPreview:`Laddar förhandsvisning...`,enterTemplateContent:`Ange mallinnehåll för att se förhandsvisning`,titlePreview:`Titel:`,bodyPreview:`Brödtext:`,resetToDefault:`Återställ till standard`,titleRequired:`Titel krävs`,bodyRequired:`Brödtext krävs`,notificationLog:`Notislogg`,showFailedOnly:`Visa endast misslyckade`,last24Hours:`Senaste 24 timmarna`,last7Days:`Senaste 7 dagarna`,last30Days:`Senaste 30 dagarna`,last90Days:`Senaste 90 dagarna`,justNow:`Precis nu`,noFailedNotifications:`Inga misslyckade notiser`,noNotificationsLogged:`Inga notiser loggade`,unknownProvider:`Okänd leverantör`,logTitle:`Titel`,logMessage:`Meddelande`,logError:`Fel`,logProvider:`Leverantör: {{type}}`,logTime:`Tid: {{time}}`,refresh:`Uppdatera`,clearOld:`Rensa gamla`,statsSummary:`Senaste {{days}} dagarna:`,statsNotifications:`notiser`,statsSent:`{{count}} skickade`,statsFailed:`{{count}} misslyckade`,eventTypes:{print_start:`Utskrift startad`,print_complete:`Utskrift slutförd`,print_failed:`Utskrift misslyckades`,print_stopped:`Utskrift stoppad`,print_progress:`Förlopp`,printer_offline:`Skrivare offline`,printer_error:`Skrivarfel`,filament_low:`Lågt filament`,maintenance_due:`Underhåll förfallit`,test:`Test`},userEmail:{title:`Notiser`,emailNotifications:`E-postnotiser`,emailNotificationsDesc:`Ta emot e-postnotiser för dina egna utskriftsjobb. E-postmeddelanden skickas med hjälp av systemets SMTP-inställningar som konfigurerats i avancerad autentisering.`,sendingTo:`Notiser kommer att skickas till`,noEmailWarning:`Ditt konto har ingen e-postadress. Kontakta en administratör för att lägga till en.`,printJobNotifications:`Utskriftsjobbnotiser`,printJobNotificationsDesc:`Välj vilka händelser som utlöser e-postnotiser för utskriftsjobb som du skickar in.`,printJobStarts:`Utskriftsjobb startar`,printJobStartsDesc:`Få en notis när ditt utskriftsjobb börjar.`,printJobFinishes:`Utskriftsjobb slutförs`,printJobFinishesDesc:`Få en notis när ditt utskriftsjobb slutförs.`,printErrors:`Utskriftsfel`,printErrorsDesc:`Få en notis när ditt utskriftsjobb misslyckas eller stöter på ett fel.`,printJobStops:`Utskriftsjobb stoppas`,printJobStopsDesc:`Få en notis när ditt utskriftsjobb avbryts eller stoppas.`,saveSuccess:`Notisinställningar sparade.`,saveError:`Kunde inte spara notisinställningar.`}},richTextEditor:{bold:`Fet`,italic:`Kursiv`,underline:`Understruken`,bulletList:`Punktlista`,numberedList:`Numrerad lista`,alignLeft:`Vänsterjustera`,alignCenter:`Centrera`,alignRight:`Högerjustera`,addLink:`Lägg till länk`,removeLink:`Ta bort länk`},externalLinks:{title:`Sidofältslänkar`,sidebarLayout:`Sidofält`,sidebarLayoutDescription:`Visa eller dölj inbyggda sidor, lägg till externa länkar och dra objekt för att omordna sidofältsnavigeringen.`,systemPages:`Bambuddy-sidor`,externalLinks:`Externa länkar`,visibleInSidebar:`Synlig i sidofält`,hiddenFromSidebar:`Dold från sidofält`,requiredInSidebar:`Obligatorisk i sidofält`,hidePage:`Dölj sida`,showPage:`Visa sida`,settingsCannotBeHidden:`Inställningar kan ej döljas`,noLinksConfigured:`Inga externa länkar konfigurerade`,deleteLink:`Ta bort länk`,removeCustomIcon:`Ta bort anpassad ikon`,openInNewTab:`Öppna i ny flik`,placeholders:{linkName:`Min länk`}},keyboardShortcuts:{title:`Tangentbordsgenvägar`,navigation:`Navigering`,archivesSection:`Arkiv`,kProfilesSection:`K-profiler`,generalSection:`Allmänt`,shortcuts:{goToPrinters:`Gå till Skrivare`,goToArchives:`Gå till Arkiv`,goToQueue:`Gå till Kö`,goToStats:`Gå till Statistik`,goToProfiles:`Gå till Molnprofiler`,goToSettings:`Gå till Inställningar`,focusSearch:`Fokusera sökning`,openUploadModal:`Öppna uppladdningsmodal`,clearSelection:`Rensa val / ta bort fokus från inmatning`,contextMenu:`Kontextmeny på kort`,refreshProfiles:`Uppdatera profiler`,newProfile:`Ny profil`,exitSelectionMode:`Avsluta urvalsläge`,showHelp:`Visa denna hjälp`},footer:`Tryck på Esc eller klicka utanför för att stänga`},notificationLog:{title:`Notislogg`,events:{printStarted:`Utskrift startad`,printComplete:`Utskrift slutförd`,printFailed:`Utskrift misslyckades`,printStopped:`Utskrift stoppad`,progress:`Förlopp`,printerOffline:`Skrivare offline`,printerError:`Skrivarfel`,lowFilament:`Lågt filament`,maintenanceDue:`Underhåll utebliven`,test:`Test`},timeAgo:{justNow:`Precis nu`,minutesAgo:`{{minutes}}m sedan`,hoursAgo:`{{hours}}t sedan`}},restoreBackup:{title:`Återställ säkerhetskopia`,restoring:`Återställer...`,restoreComplete:`Återställning slutförd`,restoreFailed:`Kunde inte återställa`,importSettings:`Importera inställningar från en säkerhetskopia`,pleaseWait:`Vänligen vänta medan din data återställs`,clickToSelect:`Klicka för att välja säkerhetskopia (.json eller .zip)`,howDuplicateHandling:`Hur dubbletter hanteras:`,categories:{printers:`Skrivare`,smartPlugs:`Kontakter`,notificationProviders:`Notisleverantörer`,filaments:`Filament`,archives:`Arkiv`,pendingUploads:`Väntande uppladdningar`,settingsTemplates:`Inställningar & mallar`},matchingInfo:{printers:`matchade efter serienummer`,smartPlugs:`matchade efter IP-adress`,notificationProviders:`matchade efter namn`,filaments:`matchade efter namn + typ + märke`,archives:`matchade efter innehållshash`,pendingUploads:`matchade efter filnamn`,settingsTemplates:`skrivs alltid över`},replaceExisting:`Ersätt befintlig data`,keepExisting:`Behåll befintlig data`,replaceDescription:`Skriv över objekt som redan finns med säkerhetskopia`,keepDescription:`Återställ endast objekt som inte redan finns`,caution:`Varning:`,cautionText:`Att skriva över kommer att ersätta dina nuvarande konfigurationer med data från säkerhetskopian. Skrivaråtkomstkoder skrivs aldrig över av säkerhetsskäl.`,itemsRestored:`Objekt återställda`,itemsSkipped:`Objekt hoppade över`,restored:`Återställd`,skipped:`Hoppades över (finns redan)`,filesLabel:`Filer (3MF, minibilder, etc.)`,newApiKeysGenerated:`Nya API-nycklar genererade`,newApiKeysWarning:`Dessa nycklar visas endast en gång. Kopiera dem nu!`,processingBackup:`Bearbetar säkerhetskopia...`,noDataFound:`Ingen data hittades att återställa i säkerhetskopian.`,failedToRestore:`Kunde inte återställa säkerhetskopia. Kontrollera filformatet.`},backupExport:{title:`Exportera säkerhetskopia`,selectData:`Välj data att inkludera`,selectAll:`Markera alla`,selectNone:`Avmarkera alla`,categoryDescriptions:{settings:`Språk, tema, uppdateringsinställningar`,notifications:`ntfy, Pushover, Discord, etc.`,templates:`Anpassade meddelandemallar`,smartPlugs:`Tasmota-kontaktkonfigurationer`,externalLinks:`Sidofältslänkar till externa tjänster`,printers:`Skrivarinformation (åtkomstkoder exkluderade)`,plateDetection:`Referensbilder för tomma plattor`,filaments:`Filamenttyper och kostnader`,maintenance:`Anpassade underhållsscheman`,archives:`All utskriftsdata + filer (3MF, minibilder, foton)`,projects:`Projekt, BOM-objekt och bilagor`,pendingUploads:`Uppladdningar från virtuell skrivare som väntar på granskning`,apiKeys:`Webhook API-nycklar (nya nycklar genereras vid import)`},requiresPrinters:`Kräver att Skrivare är valda`,zipFileWarning:`En ZIP-fil kommer att skapas.`,zipFileDescription:`Inkluderar alla 3MF-filer, minibilder, timelapse och foton. Detta kan ta en stund och resultera i en stor fil.`,includeAccessCodes:`Inkludera åtkomstkoder`,includeAccessCodesDescription:`För överföring till en annan maskin`,includeAccessCodesWarning:`Åtkomstkoder kommer att inkluderas i klartext. Håll denna säkerhetskopia säker!`,categoriesSelected:`{{selectedCount}} kategorier valda`},pendingUploads:{placeholders:{notes:`Lägg till anteckningar om denna utskrift...`},discardUpload:`Kassera uppladdning`,archiveAllUploads:`Arkivera alla uppladdningar`,discardAllUploads:`Kassera alla uppladdningar`,archive:`Arkivera`,timeAgo:{justNow:`Precis nu`,minutesAgo:`{{minutes}}m sedan`,hoursAgo:`{{hours}}t sedan`,daysAgo:`{{days}}d sedan`}},apiBrowser:{placeholders:{requestBody:`JSON-förfrågningsinnehåll...`,searchEndpoints:`Sök ändpunkter...`}},configureAmsSlot:{title:`Konfigurera AMS-fack`,slotConfigured:`Fack konfigurerat!`,configuringSlot:`Konfigurerar fack:`,slotLabel:`{{ams}} fack {{slot}}`,searchPresets:`Sök förinställningar...`,colorPlaceholder:`Färgnamn eller hex (t.ex. brun, FF8800)`,clearCustomColor:`Rensa anpassad färg`,noCloudPresets:`Inga molnförinställningar. Logga in på Bambu Cloud för att synkronisera.`,noPresetsAvailable:`Inga förinställningar tillgängliga. Logga in på Bambu Cloud eller importera lokala profiler.`,noMatchingPresets:`Inga matchande förinställningar hittade.`,custom:`Anpassad`,builtin:`Inbyggd`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Inställningar skickade till skrivare`,filamentProfile:`Filamentprofil`,kProfileLabel:`K-profil (Tryckförskott)`,filteringFor:`Filtrerar för: {{material}}`,noKProfile:`Ingen K-profil (använd standard 0,020)`,noMatchingKProfiles:`Inga matchande K-profiler hittade. Standard K=0,020 kommer att användas.`,otherKProfiles:`Andra K-profiler på denna skrivare`,selectFilamentFirst:`Välj en filamentprofil först`,kFromCalibration:`K={{value}} från skrivarkalibrering`,customColorLabel:`Anpassad färg (valfritt)`,presetColors:`{{name}}-färger:`,showLessColors:`Visa färre färger`,showMoreColors:`Visa fler färger`,clear:`Rensa`,hexLabel:`Hex: #{{hex}}`,resetting:`Återställer...`,resetSlot:`Återställ fack`,cancel:`Avbryt`,configuring:`Konfigurerar...`,configureSlot:`Konfigurera fack`},githubBackup:{title:`Git-säkerhetskopia`,history:`Historik`,downloadBackup:`Ladda ner säkerhetskopia`,restoreBackup:`Återställ säkerhetskopia`,noBackupsYet:`Inga säkerhetskopior än`},emailSettings:{placeholders:{fromName:`Bambuddy`}},tagManagement:{searchTags:`Sök taggar...`,renameTag:`Döp om tagg`,deleteTag:`Ta bort tagg`},notificationTemplates:{placeholders:{title:`Notistitel...`,body:`Notisbrödtext...`}},batchTag:{placeholders:{newTag:`Ange ny tagg...`}},photoGallery:{deletePhoto:`Ta bort foto`},filamentHoverCard:{copySpoolUuid:`Kopiera rullens UUID`},kProfilesView:{hasNote:`Har anteckning`,copyProfile:`Kopiera profil`},layout:{openMenu:`Öppna meny`,noPermissionSystemInfo:`Du har inte behörighet att visa systeminformation`},dashboard:{dragToReorder:`Dra för att omordna`,hideWidget:`Dölj widget`},notificationProviderCard:{deleteNotificationProvider:`Ta bort notisleverantör`},fileManagerModal:{closeFileManager:`Stäng filhanterare`,sortFiles:`Sortera filer`,goToParentFolder:`Gå till överordnad mapp`,threeView:`3D-vy`},embeddedCameraViewer:{refreshStream:`Uppdatera ström`,close:`Stäng`,zoomOut:`Zooma ut`,resetZoom:`Återställ zoom`,zoomIn:`Zooma in`,dragToResize:`Dra för att ändra storlek`},timelapseViewer:{skipBack5s:`Hoppa bakåt 5s`,skipForward5s:`Hoppa framåt 5s`},notificationProviders:{descriptions:{email:`SMTP e-postnotiser`,telegram:`Notiser via Telegram-bot`,discord:`Skicka till Discord-kanal via webhook`,ntfy:`Gratis, självhostade push-notiser`,pushover:`Enkla, pålitliga push-notiser`,callmebot:`Gratis WhatsApp-notiser via CallMeBot`,webhook:`Generisk HTTP POST till valfri URL`}},logViewer:{searchPlaceholder:`Sök meddelande eller loggnamn...`,noLogEntries:`Inga loggposter hittade`},switchbarPopover:{noSwitchesInSwitchbar:`Inga växlar i kontaktpanelen`},projectPageModal:{placeholders:{title:`Titel`,designer:`Designer`,license:`Licens`,description:`Ange beskrivning...`,profileTitle:`Profilnamn`,profileDescription:`Profilbeskrivning...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`Väntar`,justNow:`Precis nu`,now:`Nu`,minsAgo:`{{count}}m sedan`,inMins:`om {{count}}m`,hoursAgo:`{{count}}t sedan`,inHours:`om {{count}}t`,daysAgo:`{{count}}d sedan`,inDays:`om {{count}}d`},spoolbuddy:{nav:{dashboard:`Instrumentpanel`,ams:`AMS`,inventory:`Inventarium`,writeTag:`Skriv tagg`,settings:`Inställningar`},status:{nfcReady:`NFC redo`,nfcOff:`NFC av`,offline:`Offline`,online:`Online`,noPrinters:`Inga skrivare`,deviceOffline:`Enhet offline`,waitingConnection:`Väntar på enhetsanslutning...`,systemReady:`System redo`,status:`Status`},dashboard:{readyToScan:`Redo att skanna`,idleMessage:`Placera en rulle på vågen för att identifiera den`,nfcHint:`NFC-tagg kommer att läsas automatiskt`,device:`Enhet`,syncWeight:`Synkronisera vikt`,weightSynced:`Synkroniserad!`,unknownTag:`Okänd tagg`,newTag:`Ny tagg upptäckt`,onScale:`på våg`,linkSpool:`Länka till rulle`,linkTagTitle:`Länka tagg till rulle`,linkTag:`Länka tagg`,selectSpool:`Välj en rulle att länka denna tagg till:`,noUntagged:`Inga rullar utan taggar hittade`,tagDetected:`Tagg upptäckt`,noTag:`Ingen tagg`,tagId:`Tagg`,grossWeight:`Bruttovikt`,spoolSize:`Rullstorlek`,close:`Stäng`,currentSpool:`Aktuell rulle`,plateReady:`Platta redo: {{name}}`,plateReadyLabel:`Plattor redo att rensa`,plateClearAction:`Rensa`,plateClearedToast:`Platta markerad som rensad`,plateClearFailed:`Kunde inte markera platta som rensad`},modal:{spoolDetected:`Rulle upptäckt`,assignToAms:`Tilldela till AMS`,syncWeight:`Synkronisera vikt`,weightSynced:`Synkroniserad!`,syncing:`Synkroniserar...`,newTagDetected:`Ny tagg upptäckt`,addToInventory:`Lägg till i inventarium`,assignToAmsTitle:`Tilldela till AMS`,selectSlot:`Välj ett fack`,assign:`Tilldela`,assigning:`Tilldelar...`,assignSuccess:`Tilldelad!`,assignPendingInsert:`Tilldelad. Facket kommer att konfigureras när du sätter in rullen.`,assignError:`Kunde inte tilldela rulle. Försök igen.`,noPrinterSelected:`Välj en skrivare...`,noAmsDetected:`Ingen AMS upptäckt på denna skrivare`,slot:`Fack`},weight:{noReading:`Ingen avläsning`,stable:`Stabil`,measuring:`Mäter...`,tare:`Tara`,calibrate:`Kalibrera`},spool:{remaining:`Återstående`,material:`Material`,brand:`Märke`,color:`Färg`,coreWeight:`Kärna`,labelWeight:`Etikett`,scaleWeight:`Våg`,netWeight:`Nettovikt`,lastUsed:`Senast använd`,unknownColor:`Okänd färg`},ams:{noData:`Ingen AMS upptäckt`,connectAms:`Anslut en AMS för att se filamentfack`,noPrinter:`Ingen skrivare vald`,selectPrinter:`Välj en skrivare från den övre menyn`,printerDisconnected:`Skrivare frånkopplad`,humidity:`Luftfuktighet`,level:`Nivå`,active:`Aktiv`,slot:`Fack`,empty:`Tomt`},inventory:{search:`Sök rullar...`,empty:`Inga rullar i inventariet`,noResults:`Inga matchande rullar`,spools:`rullar`,addSpool:`Lägg till rulle`},settings:{tabDevice:`Enhet`,tabDisplay:`Skärm`,tabScale:`Våg`,tabUpdates:`Uppdateringar`,nfcReader:`NFC-läsare`,type:`Typ`,connection:`Anslutning`,notConnected:`Ej ansluten`,deviceInfo:`Enhetsinformation`,hostname:`Värdnamn`,uptime:`Driftstid`,systemConfig:`Backend & Autentisering`,backendUrl:`Bambuddy Backend-URL`,apiToken:`API-token`,apiTokenPlaceholder:`Ange API-token`,saveConfig:`Spara konfiguration`,systemQueued:`Konfiguration köad.`,nfcDiagnostic:`NFC-diagnostik`,scaleDiagnostic:`Vågdiagnostik`,readTagDiagnostic:`Läs tagg-diagnostik`,testNfc:`Testa läsare`,testScale:`Testa noggrannhet`,testReadTag:`Läs tagg`,systemFieldsRequired:`Backend-URL krävs.`,brightness:`Ljusstyrka`,saved:`Sparad`,noBacklight:`Ingen DSI-bakgrundsbelysning upptäckt. Ljusstyrkekontroll kräver en DSI-display.`,screenBlank:`Skärm avstängningstimeout`,screenBlankDesc:`Skärmen stängs av efter inaktivitet. Tryck för att väcka.`,displayNote:`Ljusstyrka tillämpas som ett mjukvarufilter.`,scaleCalibration:`Vågkalibrering`,currentWeight:`Aktuell vikt`,tareOffset:`Tara`,calFactor:`Faktor`,knownWeight:`Känd vikt`,calStep1:`Ta bort alla föremål från vågen och tryck på Sätt noll.`,calStep2:`Placera känd vikt på vågen.`,setZero:`Sätt noll`,calibrateNow:`Kalibrera`,calibrated:`Kalibrerad`,tareSet:`Tara-kommando skickad. Väntar på enhet...`,tareComplete:`Tara slutförd!`,tareTimedOut:`Tara timeout — körs SpoolBuddy-demon?`,tareFailed:`Kunde inte skicka tarakommando`,zeroSet:`Nollpunkt inställd. Placera känd vikt på vågen.`,calibrationDone:`Kalibrering slutförd!`,calibrationFailed:`Kalibrering misslyckades`,lastCalibrated:`Senast kalibrerad`,stable:`Stabil`,settling:`Stabiliserar...`,firmware:`Firmware`,scale:`Våg`,noDevice:`Ingen SpoolBuddy-enhet hittad`,daemonVersion:`Demonversion`,currentVersion:`Aktuell`,versionPending:`Väntar på demon...`,checking:`Kontrollerar...`,checkUpdates:`Sök efter uppdateringar`,updateAvailable:`Uppdatering tillgänglig`,updateInstructions:`Uppdatera via SSH: kör SpoolBuddy-installationsskriptet för att uppgradera.`,upToDate:`Uppdaterad`,includeBeta:`Inkludera betaversioner`},writeTag:{tabExisting:`Befintlig rulle`,tabNew:`Ny rulle`,tabReplace:`Ersätt tagg`,searchPlaceholder:`Sök efter material, färg, märke...`,noUntaggedSpools:`Inga rullar utan taggar`,noTaggedSpools:`Inga rullar med taggar`,selectSpool:`Välj en rulle, placera sedan en tom NTAG på läsaren`,placeTag:`Placera en NTAG på läsaren`,tagReady:`Tagg upptäckt — redo att skriva`,writeTag:`Skriv tagg`,replaceTag:`Ersätt tagg`,writing:`Skriver tagg...`,waiting:`Väntar på SpoolBuddy...`,writeSuccess:`Tagg skriven!`,writeFailed:`Kunde inte skriva tagg`,queueFailed:`Kunde inte köa skrivkommando`,tryAgain:`Försök igen`,cancel:`Avbryt`,replaceWarning:`Gamla taggen kommer att avlänkas. Ny tagg kommer att ersätta den.`,deviceOffline:`SpoolBuddy är offline`,material:`Material`,colorName:`Färgnamn`,color:`Färg`,brand:`Märke`,weight:`Vikt (g)`,createSpool:`Skapa rulle`,creating:`Skapar...`,spoolCreated:`Rulle skapad! Redo att skriva.`,createFailed:`Kunde inte skapa rulle`,incompleteDataWarning:`Tagg skriven med ofullständig Spoolman-data`},quickMenu:{printerPower:`Skrivarström`,systemControls:`System`,restartDaemon:`Starta om demon`,restartBrowser:`Starta om webbläsare`,reboot:`Starta om`,shutdown:`Stäng av`,swipeToClose:`Svep ner för att stänga`,confirmTitle:`Bekräfta`,confirmShutdown:`Är du säker på att du vill stänga av SpoolBuddy? Du kommer att behöva fysisk åtkomst för att sätta på den igen.`,confirmReboot:`Är du säker på att du vill starta om SpoolBuddy?`,confirmRestartDaemon:`Starta om SpoolBuddy-demon? NFC och våg kommer att vara tillfälligt otillgängliga.`,confirmRestartBrowser:`Starta om kiosk-webbläsaren? Skärmen kommer kort att bli tom.`,confirm:`Bekräfta`,confirmPlugOn:`Sätt på {{name}}?`,confirmPlugOff:`Stäng av {{name}}?`,turnOn:`Sätt på`,turnOff:`Stäng av`}},diagnostic:{modalTitle:`Anslutningsdiagnostik — {{name}}`,running:`Kör diagnostik...`,runningElapsed:`Kör diagnostik... ({{elapsed}}s)`,waitingForReportHint:`Lyssnar efter att skrivaren ska publicera en statusrapport — detta kan ta upp till {{max}} sekunder.`,runFailed:`Kunde inte köra diagnostik: {{error}}`,retry:`Kör igen`,runButton:`Kör diagnostik`,sectionTitle:`Anslutningsdiagnostik`,sectionDescription:`Kontrollera varför en skrivare inte ansluter eller inte skriver ut — portåtkomlighet, LAN-utvecklarläge, Docker-nätverksläge och inloggningsuppgifter.`,noPrinters:`Inga skrivare konfigurerade.`,overall:{ok:`Inga problem hittade — skrivaranslutningen ser frisk ut.`,warnings:`Skrivaren bör fungera, men vissa saker behöver uppmärksamhet.`,problems:`Hittade problem som förklarar varför skrivaren inte ansluter eller skriver ut.`},check:{port_mqtt:{title:`Kontrollport (MQTT 8883)`,pass:`Åtkomlig — skrivaren accepterar kontrollanslutningar.`,fail:`Port 8883 är otillgänglig. Skrivaren är avstängd, har en annan IP-adress, eller en brandvägg blockerar den. Verifiera skrivarens IP och att inget blockerar port 8883.`},port_ftps:{title:`Filöverföringsport (FTPS 990)`,pass:`Åtkomlig — skickande av utskriftsfiler kommer att fungera.`,warn:`Port 990 är otillgänglig. Övervakning kan fortfarande fungera, men skickande av utskrifter till skrivaren kommer att misslyckas. Se till att port 990 inte blockeras.`,warn_no_tls:`Port 990 är öppen men skrivarens filservice slutför inte ett TLS-handskak. Utskriftsfiler, omslag och timelapse kan inte hämtas, så arkiv förblir tomma. Starta om skrivaren — att låsa upp porten kommer inte att hjälpa.`},external_storage:{title:`Lagra skickade filer på extern lagring (installationssteg 4)`,pass:`Skrivaren rapporterar att detta alternativ är på — skickade filer kommer att lagras på SD-kortet och arkiv kommer att ha minibilder och slicer-inställningar.`,fail:`Skrivaren rapporterar att detta alternativ är av. Aktivera "Lagra skickade filer på extern lagring" — på nyare firmware (P2S 01.02 / Bambu Studio 2.6+) finns växeln på skrivarens Utskriftsinställningar; på äldre versioner finns den i Bambu Studio / OrcaSlicers Enhetsflik. Utan det saknar varje arkiverad utskrift sin minibild och slicer-inställningar.`,skip:`Kontrollerades inte — kräver en aktiv MQTT-anslutning. På äldre slicers där denna inställning endast finns i slicern rapporterar skrivaren aldrig det, så denna kontroll kommer att passera även när alternativet är av — verifiera installationssteg 4 manuellt.`,skip_unsupported_model:`Denna modell har ett SD-kortfack men inget sätt att slå på alternativet — aktuell P1-serie-firmware exponerar inte växeln i Bambu Studio och skrivaren har ingen skärm. Inget att åtgärda här; arkiverade utskrifter kan sakna minibilder och slicer-inställningar tills Bambu Lab lägger till firmware-stöd.`,fail_no_media:`Alternativet är aktiverat, men skrivaren rapporterar att det inte finns något kort eller sticka i sin kortplats, så det finns ingenstans för skickade filer att ta vägen. Sätt i ett och skriv ut igen – fram till dess kommer alla arkiverade utskrifter att sakna sina minibilder och slicing-metadata.`,warn_internal_storage:`Alternativet är aktiverat och lagring finns, men den sista utskriften gick ändå till skrivarens interna lagring, som Bambuddy inte kan läsa. På H2-serien och P2S skickar Bambu Studios Skriv ut-knapp alltid dit det alternativ det är inställt på. Arkivet skrivs ut med namn och tidpunkt, men utan minibild eller metadata för slicern. För kompletta arkiv, starta utskrifter från Bambuddy eller slica i OrcaSlicer — eller i Bambu Studio, använd Skicka med Externt vald, och starta sedan utskriften.`,warn_internal_history:`Alternativet är aktiverat och lagring finns, men den senaste utskriften kördes från en fil som redan fanns på skrivaren – en ny utskrift från dess skärm, en start från Handy eller en fil som skickades tidigare. Det biblioteket finns på den interna lagringen som Bambuddy inte kan läsa, och ingen inställning ändrar det, eftersom ingenting skickades för den utskriften. Den arkiverar fortfarande med sitt namn och tidpunkt, men utan en minibild eller slicer-metadata. För fullständiga arkiv, starta utskrifter från Bambuddy eller skicka dem från slicern.`},port_rtsps:{title:`Kameraport ({{protocol}} {{port}})`,pass:`Åtkomlig — kameraströmmen kommer att fungera.`,warn:`Port {{port}} är otillgänglig. Live-kameravyn kommer inte att fungera. Detta påverkar inte utskriften.`},macos_local_network:{title:`macOS lokala nätverksbehörighet`,pass:`macOS tillåter Bambuddy att nå det lokala nätverket.`,warn_unsigned:`Den Python som kör Bambuddy har ingen kodsignatur, så macOS har inget att koppla en lokal nätverksbehörighet till och släpper tyst varje anslutning till skrivaren - inget fel och ingen prompt. Kör Bambuddy-uppdateringen (install/update_macos.sh), som signerar den, starta sedan om Bambuddy. Tolk: {{executable}}`,warn_permission:`Om skrivaren är påslagen och på den här adressen, öppna Systeminställningar > Sekretess & säkerhet > Lokalt nätverk och se till att den Python som kör Bambuddy är aktiverad. macOS släpper lokala anslutningar tyst när det inte är det, och uppdatering av Python kan lämna den gamla behörigheten bakom sig.`},network_mode:{title:`Docker-nätverksläge`,genericRuntime:`en container`,pass:`Körs i {{runtime}} med värdnätverk.`,warn:`Bambuddy körs i {{runtime}} med bryggnätverk. Skrivaruppäckt och den virtuella skrivaren kräver värdnätverksläge — skapa containern igen i värdnätverksläge ("network_mode: host" i docker-compose, "--network=host" för Podman).`,skip:`Körs inte i Docker — inte tillämpligt.`,skip_unknown:`Bambuddy körs i {{runtime}}, men dess nätverksläge kunde inte fastställas. Om skrivarupptäckt eller den virtuella skrivaren inte fungerar, återskapa containern med värdnätverk.`,skip_system_container:`Bambuddy körs i en {{runtime}} systemcontainer, som sitter på LAN som en virtuell maskin — inte tillämpligt.`},subnet:{title:`Nätverkssubnät`,pass:`Skrivaren och Bambuddy är på samma subnät.`,warn:`Skrivaren ({{printer_ip}}) och Bambuddy ({{host_ip}}) är på olika subnät. De kan inte nå varandra om inte routning mellan subnäten är konfigurerad.`,skip:`Subnät kunde inte bestämmas — hoppade över.`},mqtt_auth:{title:`Skrivarens inloggningsuppgifter`,pass:`Skrivaren accepterade anslutningen.`,fail:`Skrivaren är åtkomlig men Bambuddy är inte ansluten till den. Åtkomstkoden eller serienumret är troligen fel — åtkomstkoden ändras varje gång LAN Only eller Utvecklarläge växlas, så kopiera den från skrivarens skärm igen. En skrivare som startar om, eller redan har nått sin gräns för samtidiga anslutningar, kan se ut på samma sätt.`,fail_auth_rejected:`Skrivaren avvisade Bambuddys inloggningsuppgifter. Åtkomstkoden eller serienumret är fel — åtkomstkoden ändras varje gång LAN Only eller Utvecklarläge växlas, så kopiera den från skrivarens skärm och spara den i skrivarinställningarna.`,skip:`Kontrollerades inte — skrivaren kunde inte nås.`},developer_mode:{title:`LAN-utvecklarläge`,pass:`Utvecklarläge är aktiverat.`,fail:`Utvecklarläge är AV på skrivaren. Aktivera det i skrivarens LAN-inställningar — och bekräfta med OK. Utan det kommer utskrifter inte att starta.`,skip:`Kunde inte kontrolleras — kräver en aktiv anslutning till skrivaren.`},printer_publishing:{title:`Skrivaren publicerar status`,pass:`Skrivaren publicerar statusuppdateringar — AMS, filament och K-profiler kommer att speglas korrekt till slicern.`,fail:`MQTT-mäklaren accepterade anslutningen men skrivaren har inte publicerat några statusrapporter. Detta är nästan alltid ett felaktigt serienummer eller ett serienummer med felaktigt skiftläge — device/<serial>/report är skiftlägeskänsligt. Dubbelkolla serienumret i skrivarinställningarna mot skärmen på skrivaren.`,skip:`Kunde inte kontrolleras — kräver en aktiv anslutning till skrivaren.`}}},systemHealth:{sectionTitle:`Systemhälsa`,sectionDescription:`Söker i senaste loggar efter kända problem som du vanligtvis kan åtgärda själv, innan de blir till ett supportärende.`,rescan:`Sök igen`,clean:`Inga kända problem hittade i de senaste {{times}} loggposterna.`,logUnavailable:`Filloggning är inaktiverad, så loggar kan inte sökas. Aktivera filloggning för att använda denna kontroll.`,learnMore:`Hur du åtgärdar`,fixLabel:`Åtgärd:`,occurrences:`Set {{times}}× — senast {{lastSeen}}`,category:{layer8:`Du kan åtgärda detta`,environment:`Miljö`,bug:`Rapportera detta`},signature:{"ftp-auth-rejected":{name:`Skrivaren avvisade åtkomstkoden`,cause:`Skrivaren vägrade filöverföringsinloggningen. Åtkomstkoden är fel, eller den ändrades efter att Utvecklarläge växlats.`,fix:`Kopiera åtkomstkoden från skrivarens skärm (LAN-inställningar) och uppdatera den i skrivarens inställningar i Bambuddy.`},"ftp-connection-timeout":{name:`Filöverföringsanslutning timeout`,cause:`Bambuddy kunde inte nå skrivarens filöverföringsport (FTPS 990). Porten är blockerad, eller skrivaren är av eller på ett annat subnät.`,fix:`Se till att inget blockerar port 990 mellan Bambuddy och skrivaren, och att båda är på samma nätverk.`},"ftp-ssl-error":{name:`Säker filöverförings-handskak misslyckades`,cause:`Skrivarens filservice svarade på port 990 utan TLS. Dess filserver har fastnat — ett fel på skrivarsidan, inte ett brandväggs- eller firmware-problem.`,fix:`Starta om skrivaren. Tills dess kan utskriftsfiler, omslag och timelapse inte hämtas; själva utskriften påverkas inte.`},"bambu-cloud-captcha":{name:`Bambu Cloud begär en CAPTCHA`,cause:`Bambus anti-missbrukslager utmanar detta nätverk, så ingen Bambu Cloud-inloggning kan slutföras. Det är kopplat till den offentliga IP-adressen, inte till ditt konto eller denna installation.`,fix:`Vänta — det löser sig normalt inom några timmar, och upprepade inloggningsförsök förlänger det. För att ansluta under tiden, logga in med en åtkomsttoken som tas från en webbläsarsession.`},"mqtt-connection-flapping":{name:`Skrivaranslutningen kopplas bort upprepade gånger`,cause:`Kontrollanslutningen (MQTT 8883) kopplas bort och ansluter upprepade gånger — vanligtvis en svag nätväg eller en delvis blockerad port.`,fix:`Kontrollera Wi-Fi-signalen vid skrivaren, föredra en trådbunden anslutning och se till att port 8883 är pålitligt åtkomlig.`},"camera-connection-refused":{name:`Kameraström otillgänglig`,cause:`Live-kameran kunde inte nås på port RTSPS 322. Porten är blockerad, eller kameran eller LAN-livevy är av på skrivaren.`,fix:`Aktivera kameran och LAN-livevy på skrivaren, och se till att port 322 inte blockeras. Detta påverkar inte utskriften.`},"database-locked":{name:`Databas-skrivkonflikt`,cause:`SQLite-databasen får "databas är låst"-fel under belastning — vanligt när flera skrivare körs samtidigt.`,fix:`Växla Bambuddy till en extern PostgreSQL-databas. Se PostgreSQL-guiden i dokumentationen.`}}},vpDiagnostic:{title:`Inställningskontroll — {{name}}`,runButton:`Kör inställningskontroll`,running:`Kör inställningskontroll...`,runFailed:`Kunde inte köra inställningskontrollen: {{error}}`,retry:`Kör igen`,overall:{ok:`Alla kontroller godkända — denna virtuella skrivare är korrekt konfigurerad.`,warnings:`Den virtuella skrivaren bör fungera, men vissa saker behöver uppmärksamhet.`,problems:`Hittade problem som förklarar varför slicern inte kan se eller använda denna virtuella skrivare.`},check:{enabled:{title:`Virtuell skrivare aktiverad`,fail:`Denna virtuella skrivare är avstängd. Växla på den för att göra den upptäckbar.`},running:{title:`Tjänster körs`,fail:`Den virtuella skrivaren är aktiverad men dess tjänster körs inte. Kontrollera Bambuddy-loggen — en bind-IP-konflikt eller ett behörighetsfel stoppar vanligtvis dem.`},bind_interface:{title:`Bind nätverksgränssnitt`,fail:`Bind-gränssnittet är inte inställt, eller existerar inte längre på denna värd. Välj ett aktuellt gränssnitt i rullisten Bind-gränssnitt.`},access_code:{title:`Åtkomstkod inställd`,fail:`Ingen åtkomstkod är inställd. Slicern måste ges samma 8-teckens åtkomstkod som du ställt in här.`},target_printer:{title:`Målskrivare`,fail:`Ingen målskrivare är vald. Proxyläge behöver en riktig skrivare att vidarebefordra till.`,warn:`Målskrivaren är offline just nu — vidarebefordring kommer att återupptas när den ansluter igen.`},port_ftps:{title:`Filuppladdningstjänst (port {{port}})`,fail:`Inget lyssnar på port {{port}} för bind-IP, så slicern kan inte ladda upp filer. En portkonflikt på detta gränssnitt är den vanliga orsaken.`},port_mqtt:{title:`Kontrolltjänst (port {{port}})`,fail:`Inget lyssnar på port {{port}} för bind-IP, så slicern kan inte ansluta eller visa status.`},port_bind:{title:`Söktjänst (port {{port}})`,fail:`Inget lyssnar på port {{port}} för bind-IP, så slicerns upptäcknings-handskak misslyckas.`},privileged_ports:{title:`Privilegerad portbindning`,fail:`Port {{port}} är under 1024, och denna tjänst har inte behörighet att binda den — varför inget lyssnar ovan. Lägg till AmbientCapabilities=CAP_NET_BIND_SERVICE till /etc/systemd/system/bambuddy.service och starta om, eller kör "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))". För Docker, lägg till cap_add: [NET_BIND_SERVICE].`},certificate:{title:`TLS-certifikat`,pass:`Certifikat redo. Se till att Bambuddy-CA-certifikatet (ovan) importeras till din slicerns betroddelagring.`,fail:`TLS-certifikatet för denna virtuella skrivare saknas. Kontrollera att Bambuddy-datakatalogen är skrivbar.`}}},bugReport:{title:`Rapportera ett fel`,description:`Beskrivning`,descriptionPlaceholder:`Vad gick fel? Beskriv problemet...`,email:`E-post (valfritt)`,emailPlaceholder:`din@e-post.com`,emailPrivacy:`Om den anges kommer din e-post att inkluderas i en ihopfälld sektion av GitHub-ärendet så att underhållaren kan följa upp.`,screenshot:`Skärmdump`,uploadOrPaste:`Ladda upp, klistra in eller dra en bild`,dataCollectedSummary:`Vilken data inkluderas i rapporten?`,dataIncluded:`Inkluderad:`,dataIncludedList:`App-version, OS, arkitektur, Python-version, databasstatistik (endast räknare), skrivarmodeller, munstyckesantal, firmwareversioner, anslutningsstatus, integrationsstatus (Spoolman, MQTT, HA), icke-känsliga inställningar, nätverksgränssnittsantal, Docker-detaljer, beroendeversioner.`,dataNeverIncluded:`Inkluderas aldrig:`,dataNeverIncludedList:`Skrivarnamn, serienummer, åtkomstkoder, lösenord, IP-adresser, e-postadresser, API-nycklar, tokens, webhook-URL:er, värdnamn eller användarnamn.`,submit:`Skicka in`,startLogging:`Starta felsökningsloggning`,stepEnableLogging:`Felsökningsloggning aktiverad`,stepReproduce:`Återskapa problemet nu`,stepStopLogging:`Stoppa och skicka in rapport`,stopAndSubmit:`Stoppa och skicka in`,maxDuration:`Stoppar automatiskt efter {{minutes}} min`,stoppingLogs:`Samlar in loggar och skickar in...`,submitting:`Skickar in felrapport...`,submittingStepConnection:`Kör skrivaranslutningskontroller`,submittingStepVirtualPrinters:`Kör inställningskontroller för virtuella skrivare`,submittingStepLogScan:`Söker i senaste loggar efter kända problem`,submittingStepSubmit:`Skickar in rapport till GitHub`,submitSuccess:`Felrapport skickad in!`,submitFailed:`Kunde inte skicka in felrapport`,diagnosticChecking:`Kontrollerar skrivaranslutningar...`,diagnosticHealthy:`Anslutningskontroll godkänd — inga problem hittade på dina skrivare.`,diagnosticSummary:`{{problems}} av {{total}} skrivare har anslutningsproblem`,diagnosticIntro:`En eller flera skrivare har ett anslutningsproblem som kan orsaka ditt problem. Fäll ut en skrivare nedan för att se åtgärden — att lösa det kan lösa problemet utan en felrapport. Du kan fortfarande skicka in en rapport nedan.`,logHealthSummary:`Kända problem hittade i dina loggar`,logHealthIntro:`Senaste loggar matchar kända problem. Kontrollera åtgärderna nedan — att lösa dem kan lösa ditt problem utan en felrapport. Du kan fortfarande skicka in en rapport nedan.`,thankYou:`Tack!`,submitted:`Din felrapport har skickats in.`,viewIssue:`Visa ärende`,closeKeepsRecording:`Du kan stänga den här panelen medan du återskapar problemet – inspelningen fortsätter och om du öppnar den igen kommer du tillbaka hit.`,resumeRecording:`Buggrapport spelar in — {{elapsed}}. Klicka för att avsluta.`,resumeReport:`Återuppta rapportering`,unexpectedError:`Ett oväntat fel uppstod`},failureDetection:{title:`AI-feldetektering`,description:`Övervaka utskrifter med ett självhostat Obico ML-API och agera automatiskt på upptäckta fel.`,mlUrl:`Obico ML-API-URL`,mlUrlHint:`Bas-URL för din självhostade Obico ml_api-container (t.ex. http://192.168.1.10:3333).`,mlToken:`ML-API-token (valfritt)`,mlTokenPlaceholder:`Lämna tomt om servern körs utan ML_API_TOKEN`,mlTokenHint:`Måste matcha ML_API_TOKEN-miljövariabeln för din Obico ml_api-container. Lämna tomt när containern körs utan en.`,test:`Test`,testSuccess:`ML-API åtkomlig och frisk.`,testSuccessTokenUnknown:`ML-API åtkomlig och frisk. Token kunde inte kontrolleras.`,testFailed:`Kunde inte nå ML-API:et.`,sensitivity:`Känslighet`,sensitivityLow:`Låg (färre falska larm)`,sensitivityMedium:`Medium (balanserad)`,sensitivityHigh:`Hög (upptäck tidigt, fler falska larm)`,sensitivityHint:`Justerar konfidens-trösklarna som utlöser varningar och fel.`,action:`Åtgärd vid upptäckt fel`,actionNotify:`Notisera endast`,actionPause:`Pausa utskrift`,actionPauseOff:`Pausa och bryt ström`,pollInterval:`Avläsningsintervall (sekunder)`,pollIntervalHint:`Hur ofta varje skrivare ska kontrollera medan den skriver ut. Minimum 5s, maximum 120s.`,externalUrlMissing:`Extern URL är inte inställd.`,externalUrlHint:`ML-API:et hämtar kamerans ögonblicksbild via URL. Sätt den externa URL:en i Allmänna inställningar så att ML-API-containern kan nå Bambuddy.`,perPrinterTitle:`Övervakade skrivare`,perPrinterHint:`Välj vilka skrivare som övervakningstjänsten ska bevaka.`,monitorAll:`Övervaka alla anslutna skrivare`,statusTitle:`Status`,serviceRunning:`Tjänst körs`,thresholds:`Låga / Hög tröskelvärden`,activePrinters:`Aktiva utskrifter`,noActivePrints:`Inga utskrifter körs för närvarande.`,historyTitle:`Senaste upptäckter`,noHistory:`Inga upptäckter än.`},makerworld:{title:`MakerWorld`,description:`Klistra in en MakerWorld-modell-URL för att importera och skriva ut den direkt från Bambuddy — utan att lämna för Bambu Handy-app.`,pasteUrlHeader:`Importera från MakerWorld`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… eller klistra in valfri MakerWorld-länk`,resolveButton:`Lös`,signInRequiredTitle:`Bambu Cloud-inloggning krävs för nedladdning`,signInRequiredBody:`Du kan bläddra bland modelldetaljer anonymt, men MakerWorld kräver ett Bambu Cloud-konto för att ladda ner 3MF-filer.`,signInExpiredTitle:`Bambu Cloud-inloggning har löpt ut`,signInExpiredBody:`Du är fortfarande inloggad på Bambuddy, men Bambu Lab har slutat acceptera den lagrade token, så nedladdningar kommer att misslyckas. Logga in på Bambu Cloud igen.`,openCloudSettings:`Öppna molninställningar`,untitledModel:`Namnlös modell`,byCreator:`av {{name}}`,downloadsCount:`{{count}} nedladdningar`,licensePrefix:`Licens`,alreadyImported:`Redan importerad`,openOnMakerworld:`Öppna på MakerWorld`,alreadyInLibrary:`Denna modell finns redan i ditt bibliotek — hitta den i Filhanterare → MakerWorld`,importSuccess:`Importerade {{filename}} — sparad i Filhanterare → MakerWorld`,platesHeader:`Plattor ({{count}})`,plateDefaultName:`Platta {{n}}`,materialCount:`{{count}} filament`,amsRequired:`AMS krävs`,slicedFor:`Slicad för {{printer}}`,alsoCompatible:`Markerad som kompatibel med: {{printers}}`,importToLibrary:`Spara`,sliceIn:`Spara och slica i {{slicer}}`,disclaimer:`MakerWorld-integration använder community-dokumenterade API-ändpunkter. Bambuddy är inte ansluten till eller godkänd av MakerWorld eller Bambu Lab.`,lastImportSuccess:`Importerad till ditt bibliotek`,lastImportAlreadyInLibrary:`Finns redan i ditt bibliotek`,viewInLibrary:`Visa i Filhanterare`,openInBambuStudio:`Öppna i Bambu Studio`,openInOrcaSlicer:`Öppna i OrcaSlicer`,importTo:`Importera till filhanterare`,recentImportsHeader:`Senaste importen`,phaseResolving:`Löser`,phaseDownloading:`Laddar ner`,folderAuto:`MakerWorld (standard)`,importAll:`Importera alla`,importAllProgress:`Importerar {{current}}/{{total}}`,openGallery:`Öppna bildgalleri`,galleryPrev:`Föregående bild`,galleryNext:`Nästa bild`,deleteImport:`Ta bort från bibliotek`,importDeleting:`Tar bort...`,importDeleted:`Borttagen från bibliotek`,confirmDelete:`Ta bort {{filename}} från biblioteket? Detta tar bort den lokala filen men plattan kan importeras om från MakerWorld.`,errors:{resolveFailed:`Kunde inte lösa den MakerWorld-URL:en.`,downloadFailed:`Kunde inte ladda ner. Försök igen.`,deleteFailed:`Kunde inte ta bort filen från biblioteket.`}},gcodeViewer:{filamentSlot:`Filament {{n}}`,loading:`Läser verktygssökväg…`,loadFailed:`Kunde inte ladda G-koden för denna fil.`,showTravel:`Rörelse`,topLayer:`Topplager`,bottomLayer:`Bottenlager`,noSource:`Ingen fil gavs för förhandsgranskning.`,view:{filament:`Filament`,feature:`Särdrag`,height:`Höjd`,width:`Bredd`},feature:{wall:`Väggar`,sparseInfill:`Gles utfyllnad`,solidInfill:`Solid utfyllnad`,bridge:`Brygga / överhäng`,support:`Stöd`,skirt:`Kant / brätte`,gapFill:`Mellanrumsifyllnad`,ironing:`Strykning`,primeTower:`Primtorn`},back:`Tillbaka`,backToArchives:`Tillbaka till utskriftsarkiv`,backToFiles:`Tillbaka till Filhanterare`,plates:`Plattor`,plateN:`Platta {{n}}`},libraryTrash:{title:`Papperskorgen`,headerButton:`Papperskorgen`,headerTooltip:`Visa filer som flyttats till papperskorgen`,backToFiles:`Tillbaka till Filhanterare`,subtitleAdmin:`Borttagna filer stannar här i {{days}} dagar, sedan raderas de automatiskt. Denna vy visar filer i papperskorgen för alla användare.`,subtitleUser:`Borttagna filer stannar här i {{days}} dagar, sedan raderas de automatiskt.`,loading:`Laddar papperskorgen…`,loadError:`Kunde inte ladda papperskorgen.`,empty:`Papperskorgen är tom.`,summary:`{{count}} filer · {{size}}`,emptyTrash:`Töm papperskorgen`,restore:`Återställ`,purgeNow:`Ta bort nu`,autoPurgeIn:`Raderas automatiskt om {{when}}`,days:`dagar`,retentionLabel:`Automatisk radering efter`,selectAll:`Markera alla`,selectOne:`Markera {{filename}}`,selectionCount:`{{count}} markerade`,bulkRestore:`Återställ markerade`,bulkPurge:`Ta bort markerade`,col:{filename:`Fil`,folder:`Mapp`,size:`Storlek`,deleted:`Flyttad till papperskorgen`,autoPurge:`Automatisk radering`,owner:`Ägare`,actions:`Åtgärder`},confirm:{purgeTitle:`Ta bort permanent?`,purgeBody:`{{filename}} kommer att tas bort från disken och kan inte återställas.`,emptyTitle:`Töm papperskorgen?`,emptyBody:`Alla {{count}} filer kommer att tas bort från disken. Detta kan inte ångras.`,bulkPurgeTitle:`Ta bort markerade filer permanent?`,bulkPurgeBody:`De {{count}} markerade filerna kommer att tas bort från disken och kan inte återställas.`,cta:`Ta bort permanent`},toast:{restored:`Fil återställd.`,restoreFailed:`Kunde inte återställa filen.`,purged:`Fil borttagen permanent.`,purgeFailed:`Kunde inte ta bort filen.`,emptied:`Tog bort {{count}} fil(er) från papperskorgen.`,emptyFailed:`Kunde inte tömma papperskorgen.`,retentionSaved:`Automatisk radering inställd på {{days}} dagar.`,retentionFailed:`Kunde inte spara inställningen för automatisk radering.`,bulkRestored:`Återställde {{count}} fil(er).`,bulkPurged:`Tog bort {{count}} fil(er).`}},libraryPurge:{title:`Rensa gamla filer`,headerButton:`Rensa gamla`,headerTooltip:`Massflytta gamla filer till papperskorgen`,description:`Rensa ut gamla filer från ditt bibliotek i ett svep. Filer med utskriftshistorik åldras efter deras senaste utskriftsdatum; filer som aldrig skrivits ut åldras efter deras uppladdningsdatum.`,ageLabel:`Flytta filer äldre än`,days:`dagar`,includeNeverPrinted:`Inkludera filer som aldrig skrivits ut`,effectsTitle:`Vad händer när du klickar på Rensa`,effect1:`Matchande filer flyttas till Papperskorgen — de raderas inte från disken än.`,effect2:`Du kan återställa dem från Papperskorgen när som helst tills behållningsfönstret löper ut.`,effect3:`Efter behållningstiden rensar papperskorgen dem permanent från disken.`,effect4:`Filer i externa (länkade) mappar hoppas över — Bambuddy raderar aldrig byte som den inte äger.`,previewLoading:`Kontrollerar hur många filer som matchar…`,previewFailed:`Kunde inte förhandsgranska rensningen.`,previewSummary:`{{count}} filer · {{size}} kommer att flyttas till papperskorgen`,andMore:`…och {{count}} till`,warning:`Filer i papperskorgen räknas fortfarande mot lagringen tills behållningsfönstret löper ut. Töm Papperskorgen därefter för att frigöra diskutrymme omedelbart.`,confirmCta:`Flytta {{count}} till papperskorgen`,purging:`Flyttar till papperskorgen…`,toast:{success:`Flyttade {{count}} fil(er) till papperskorgen.`,failed:`Kunde inte rensa filer.`}},libraryAutoPurge:{enableLabel:`Auto-rensa gamla filer`,enableDescription:`Kör den administrativa rensningen en gång per dag. Filer går till Papperskorgen först — de raderas inte omedelbart.`,ageLabel:`Auto-rensa filer äldre än`,ageDescription:`Minimum 7 dagar, maximum 10 år. Använder samma åldersregel som den manuella Rensa-knappen.`,days:`dagar`,includeNeverPrinted:`Inkludera filer som aldrig skrivits ut`,saveFailed:`Kunde inte spara inställningar för auto-rensning.`},archivePurge:{headerButton:`Rensa gamla`,headerTooltip:`Massradera gamla arkiv`,title:`Rensa gamla arkiv`,description:`Rensa ut gammal utskriftshistorik. Varje arkiv åldras efter dess senaste utskrifts slutförande — omutskrift av ett arkiv uppdaterar dess ålder, så aktivt arbete raderas aldrig.`,ageLabel:`Radera arkiv som inte skrivits ut på`,days:`dagar`,effectsTitle:`Vad händer när du klickar på Rensa`,effect1:`Varje matchande arkiv döljs från listorna och dess filer tas bort från disken (3MF, minibild, timelapse, käll-3MF, F3D-designfil, foton).`,effect2:`Arkivraden förblir i databasen så att Snabbstatistik behåller filament-, tid-, kostnads- och energibidraget — samma som standard för radering av enskilt arkiv.`,effect3:`Kryssa i "Ta också bort från statistik" nedan för att ta bort Snabbstatistik-bidraget också (matchar alternativet för radering av enskilt arkiv). Den vägen är oåterkallelig.`,effect4:`Omutskrift av ett arkiv uppdaterar dess åldersklocka, så arkiv som du fortfarande använder är säkra.`,purgeStatsLabel:`Ta också bort från statistik`,purgeStatsHint:`Tar bort de matchande arkiven från Snabbstatistik (filament, tid, kostnad, energi). Utan detta behåller Snabbstatistik varje bidrag och endast filerna lämnar disken.`,previewLoading:`Kontrollerar hur många arkiv som matchar…`,previewFailed:`Kunde inte förhandsgranska rensningen.`,previewSummary:`{{count}} arkiv · {{size}} kommer att tas bort`,andMore:`…och {{count}} till`,warning:`Filer tas bort från disken och kan inte återställas. Ladda ner eller markera som favorit allt du vill behålla innan du fortsätter.`,confirmCta:`Ta bort {{count}} arkiv`,purging:`Tar bort…`,toast:{success:`Tog bort {{count}} arkiv.`,failed:`Kunde inte rensa arkiv.`}},archiveAutoPurge:{enableLabel:`Auto-rensa gamla arkiv`,enableDescription:`En gång per dag döljs arkiv från listorna och deras filer tas bort från disken när de inte har skrivits ut inom tröskelvärdet. Omutskrift av ett arkiv återställer klockan.`,ageLabel:`Auto-radera arkiv som inte skrivits ut på`,ageDescription:`Minimum 7 dagar, maximum 10 år. Baserat på det senaste utskrifts slutförandet — omutskrift av ett arkiv uppdaterar dess ålder. Tar bort 3MF, minibild, timelapse, käll-3MF, F3D och foton.`,days:`dagar`,purgeStatsLabel:`Ta också bort från statistik`,purgeStatsDescription:`När aktiverat tar den dagliga rensaren också bort varje rensat arkiv från Snabbstatistik (filament, tid, kostnad, energi). Standard av — Snabbstatistik behåller bidraget, endast filerna lämnar disken.`,runNow:`Rensa arkiv nu`,saveFailed:`Kunde inte spara inställningar för auto-rensning.`},cameraTokens:{scope:{camera_stream:`Kameraström`,camwall:`Kameravägg`,overlay:`Strömningsöverlägg`},title:`Kamera-API-tokens`,navTitle:`Kamera-API-tokens`,description:`Långlivade tokens för att bädda in kameraströmmen i Home Assistant, Frigate, kiosker eller något annat verktyg som behöver en stabil URL. Välj omfång när du skapar en; en token kan återkallas när som helst.`,loading:`Laddar…`,confirmRevoke:{title:`Återkalla denna token?`,body:`All enheter som använder "{{name}}" kommer att förlora åtkomsten omedelbart. Detta kan inte ångras.`,cancel:`Avbryt`,confirm:`Återkalla`},create:{scopeLabel:`Omfång`,hintCameraStream:`En kameraström-token kan endast hämta kameraströmmar och ögonblicksbilder. Använd den för Home Assistant, Frigate eller något som bäddar in en enda kamera.`,hintCamWall:`En Kameravägg-token öppnar /camwall på en skärm utan inloggning. Den kan se alla skrivares namn och status, och deras kameraströmmar. Den kan inte se filnamn, adresser eller åtkomstkoder.`,hintOverlay:`En Strömningsöverlägg-token öppnar /overlay/{printerId} på en skärm utan inloggning — för OBS eller någon livestream. Den kan se en skrivares kameraström plus dess live utskriftsstatus, inklusive filnamnet som visas på skärmen. Den kan inte se adresser eller åtkomstkoder.`,title:`Skapa ny token`,nameLabel:`Token-namn`,namePlaceholder:`t.ex. Home Assistant`,daysLabel:`Dagar till utgång`,submit:`Skapa`,hint:`Maximal livstid är 365 dagar. Token-värdet visas endast en gång vid skapande — kopiera det nu.`},created:{camWallUrlTitle:`Kameravägg-URL för denna display`,camWallUrlHint:`Öppna detta på skärmen. Vem som helst som kan läsa URL:en kan titta på väggen, så behandla den som en nyckel — återkalla token för att koppla bort display.`,overlayUrlTitle:`Överläggs-URL för OBS`,overlayUrlHint:`Lägg till detta som en Browser Source i OBS. Ändra /overlay/1 numret till din skrivares nummer (från dess URL på Skrivarsidan). Vem som helst som kan läsa URL:en kan titta på strömmen, så behandla den som en nyckel — återkalla token för att koppla bort den.`,title:`Token skapad — kopiera den nu`,warning:`Detta är det enda tillfället denna token kommer att visas. När du stänger denna dialogruta kan du aldrig visa den igen.`,copy:`Kopiera`,dismiss:`Jag har sparat den`},list:{scope:`Omfång`,myTitle:`Mina tokens`,allTitle:`Alla användare (admin-vy)`,empty:`Inga tokens än.`,name:`Namn`,owner:`Ägare`,prefix:`Prefix`,created:`Skapad`,expires:`Utgår`,lastUsed:`Senast använd`,revoke:`Återkalla`,expired:`Utgången`},toast:{created:`Token skapad`,createFailed:`Kunde inte skapa token`,revoked:`Token återkallad`,revokeFailed:`Kunde inte återkalla token`,loadFailed:`Kunde inte ladda tokens`,copied:`Kopierad till urklipp`,copyFailed:`Kunde inte kopiera — markera och kopiera manuellt`}},forecast:{title:`Prognos`,noSpools:`Inga aktiva rullar hittade. Lägg till rullar till din inventering för att se prognosdata.`,noUsageData:`Inga användningsdata tillgängliga — kan inte projicera lagertidslinje.`,sku:`SKU`,material:`Material`,stock:`Lager`,dailyRate:`Förbrukning`,daysLeft:`Dagar kvar`,emptyBy:`Tomt den`,reorderBy:`Beställ senast`,actions:`Åtgärder`,trend:`Trend`,estimated:`Uppskattad`,noData:`Ingen data`,timeframe:`Tidsram`,chartTitle:`Projicerat lager — Topp 5 material`,dashedLinesROP:`Streckade linjer = beställningspunkter`,stockLevel:`Lagernivå`,reorderPoint:`Beställningspunkt`,safetyMargin:`Säkerhetsmarginal`,trendLegend:`Trend (historikbaserad, 95% servicenivå)`,estimatedLegend:`Uppskattad (viktskillnad)`,noDataLegend:`Ingen data`,ropLabel:`ROP`,ssLabel:`SS`,safetyStockLegend:`Reservlager`,stockArrivalLegend:`Lagerankomst`,stockoutLegend:`Lagerslut`,alertCount_one:`{{count}} varning`,alertCount_other:`{{count}} varningar`,order:`Beställ`,save:`Spara`,cancel:`Avbryt`,settingsSaved:`Inställningar sparade`,failedSaveSettings:`Kunde inte spara inställningar`,globalLeadTimeSaved:`Global ledtid sparad`,globalLeadTime:`Global ledtid`,globalLeadTimeHint:`Global ledtidsbas — används i beräkning av beställningspunkt för alla SKU:er`,skuLeadTimeOverride:`Åsidosätt ledtid`,skuLeadTimeHint:`0 = använd global ledtid. Sätt >0 för att åsidosätta för denna SKU.`,safetyMarginLabel:`Säkerhetsmarginal`,effectiveLeadTime:`Effektiv ledtid`,effectiveLeadTimeHint:`max(global {{global}}d, SKU {{sku}}d)`,reorderPointHint:`d̄ × LT + säkerhetsmarginal — beställ när lagret når denna nivå`,safetyMarginHint:`Statistisk säkerhetslager (z=1,65 × σ × √LT) + användardefinierad buffert`,safetyMarginHintDays:`Buffert som läggs till på den statistiska säkerhetslagret.{{approx}}`,safetyMarginHintDaysApprox:` ≈ {{g}}g vid aktuell förbrukning.`,safetyMarginHintG:`Fast viktbuffert som läggs till på den statistiska säkerhetslagret.{{approx}}`,safetyMarginHintGApprox:` ≈ {{days}}d vid aktuell förbrukning.`,individualSpools:`Enskilda rullar`,labelWeight:`Etikett`,spoolCount_one:`{{count}} rulle`,spoolCount_other:`{{count}} rullar`,stockBreakRisk:`Risk för lagerslut`,stockBreakDetail:`{{days}} dagar kvar, ledtid {{lt}} dagar.`,stockBreakBefore:`Lagerslut före påfyllning`,reorderNow:`Beställ nu`,reorderTriggerPassed:`Utlösningsdatum {{date}} har passerat.`,shoppingList:`Inköpslista`,shoppingListItems_one:`({{count}} artikel)`,shoppingListItems_other:`({{count}} artiklar)`,shoppingListEmpty:`Inköpslistan är tom. Klicka på varukorgsikonen på valfri rad för att lägga till artiklar.`,addToCart:`Lägg till i inköpslista`,alertsSnoozed:`Tysta varningar för denna SKU`,alertsEnabled:`Aktivera varningar för denna SKU`,addedToCart:`Lagt till i inköpslista`,failedAddItem:`Kunde inte lägga till artikel`,listView:`Lista`,logisticsView:`Logistik`,qty:`Antal`,weight:`Vikt`,leadTime:`Ledtid`,expectedRestock:`Förväntad påfyllning`,status:`Status`,note:`Anteckning`,pending:`Väntande`,purchased:`Inköpt`,received:`Mottagen`,markPurchased:`Markera som inköpt`,markReceived:`Markera som mottagen — lägger till rullar i Lagerinventering`,resetToPending:`Återställ till väntande`,remove:`Ta bort`,clearAll:`Rensa alla`,downloadCsv:`CSV`,addToCartTitle:`Lägg till i inköpslista`,byQuantity:`Efter kvantitet`,byDuration:`Efter varaktighet`,numberOfSpools:`Antal rullar`,lastHowManyDays:`Bör räcka hur många dagar?`,noUsageQty:`Ingen användningsdata — kvantitet inställd på 1.`,noteOptional:`Anteckning (valfritt)`,notePlaceholder:`t.ex. för projekt X, brådskande…`,addNSpools_one:`Lägg till {{count}} rulle`,addNSpools_other:`Lägg till {{count}} rullar`,onArrival:`Vid ankomst`,stockBreakIn:`Lagerslut om {{days}} dagar.`,stockRunsOutBefore:`Lagret tar slut innan ledtiden {{lt}} dagar har passerat.`,atRate:`Vid {{rate}}g/dag behöver du`,moreSpools_one:`{{count}} rulle till`,moreSpools_other:`{{count}} rullar till`,bridgeGap:`för att överbrygga gapet.`,noReadAccess:`Du har inte behörighet att visa lagerprognoser.`,noWriteAccess:`Du har inte behörighet att modifiera prognosinställningar.`}}},tr:{translation:{nav:{printers:`Yazıcılar`,archives:`Arşivler`,queue:`Baskı Kuyruğu`,stats:`İstatistikler`,profiles:`Profiller`,maintenance:`Bakım`,projects:`Projeler`,inventory:`Filament`,finance:`Finans`,files:`Dosya Yöneticisi`,makerworld:`MakerWorld`,notifications:`Bildirimler`,settings:`Ayarlar`,system:`Sistem`,collapseSidebar:`Kenar çubuğunu daralt`,expandSidebar:`Kenar çubuğunu genişlet`,update:`Güncelle`,updateAvailable:`Güncelleme mevcut: v{{version}}`,updateAvailableBanner:`{{version}} sürümü kullanılabilir!`,viewUpdate:`Güncellemeyi gör`,viewOnGithub:`GitHub'da gör`,keyboardShortcuts:`Klavye kısayolları (?)`,switchToLight:`Açık moda geç`,switchToDark:`Koyu moda geç`,switchToSystem:`Sistem moduna geç`,smartSwitches:`Akıllı Anahtarlar`,logout:`Çıkış`,installApp:`Uygulamayı yükle`,installAppSuccess:`Bambuddy yüklendi`},common:{plusNMore:`+{{count}} tane daha`,save:`Kaydet`,saving:`Kaydediliyor...`,cancel:`İptal`,delete:`Sil`,edit:`Düzenle`,add:`Ekle`,close:`Kapat`,confirm:`Onayla`,loading:`Yükleniyor...`,error:`Hata`,errorLoading:`Veri yüklenirken hata`,retry:`Yeniden dene`,success:`Başarılı`,warning:`Uyarı`,enabled:`Etkin`,disabled:`Devre dışı`,yes:`Evet`,no:`Hayır`,on:`Açık`,off:`Kapalı`,all:`Tümü`,none:`Hiçbiri`,search:`Ara`,filter:`Filtrele`,sort:`Sırala`,refresh:`Yenile`,download:`İndir`,upload:`Yükle`,uploading:`Yükleniyor...`,uploadFailed:`Yükleme başarısız`,actions:`İşlemler`,status:`Durum`,name:`Ad`,description:`Açıklama`,date:`Tarih`,time:`Saat`,hours:`saat`,minutes:`dakika`,seconds:`saniye`,days:`gün`,enable:`Etkinleştir`,disable:`Devre dışı bırak`,permissions:`İzinler`,noPrinters:`Yapılandırılmış yazıcı yok`,noData:`Veri yok`,linkNotFound:`Bağlantı bulunamadı`,required:`Zorunlu`,optional:`İsteğe bağlı`,dismiss:`Kapat`,apply:`Uygula`,reset:`Sıfırla`,export:`Dışa aktar`,import:`İçe aktar`,clear:`Temizle`,selectAll:`Tümünü Seç`,deselectAll:`Seçimi Kaldır`,noChange:`— Değişiklik yok —`,unchanged:`Değişmedi`,unassigned:`Atanmamış`,unknown:`Bilinmiyor`,unknownError:`Bilinmeyen hata`,today:`Bugün`,tomorrow:`Yarın`,asap:`En kısa sürede`,overdue:`Gecikmiş`,now:`Şimdi`,collapse:`Daralt`,expand:`Genişlet`,previous:`Önceki`,next:`Sonraki`,viewArchive:`Arşivi gör`,viewInFileManager:`Dosya Yöneticisinde gör`,addedBy:`{{username}} tarafından eklendi`,prints:`baskı`,more:`+{{count}} daha`,ascending:`Artan`,descending:`Azalan`,back:`Geri`,copy:`Kopyala`,copied:`Kopyalandı!`,printer:`Yazıcı`,remove:`Kaldır`,type:`Tür`,print:`Baskı`,rename:`Yeniden adlandır`,move:`Taşı`,create:`Oluştur`,duplicate:`Çoğalt`,left:`Sol`,right:`Sağ`,user:`Kullanıcı`,run:`Çalıştır`,running:`Çalışıyor...`},finance:{allTypes:`Tüm türler`,allCostCenters:`Tüm masraf merkezleri`,title:`Finans`,subtitle:`Cüzdan, kişisel işlemler ve masraf merkezleri`,noAccess:`Finans verilerini görüntüleme izniniz yok.`,personalView:`Kişisel görünüm`,adminView:`Yönetici görünümü`,createCostCenter:`Masraf merkezi oluştur`,adjustWallet:`Cüzdanı ayarla`,addManualPrint:`Manuel baskı ekle`,manageMembers:`Masraf merkezi üyelerini yönet`,currentBalance:`Kişisel bakiye`,transactions:`İşlemler`,personalTransactions:`Kişisel işlemler`,costCenters:`Masraf merkezleri`,availableForPrinting:`Baskı ataması için kullanılabilir`,costCenterName:`Ad`,budgetType:`Bütçe türü`,monthlyBudget:`Aylık bütçe`,totalBudget:`Toplam bütçe`,noBudget:`Bütçe yok`,create:`Oluştur`,selectUser:`Kullanıcı seç`,transactionType:`Tür`,amount:`Tutar`,noCostCenter:`Masraf merkezi yok`,descriptionOptional:`Açıklama (isteğe bağlı)`,applyAdjustment:`Ayarlamayı uygula`,memberCanPrint:`Üye baskı yapabilir`,addMember:`Üye ekle`,canPrint:`Baskı yapabilir`,noMembers:`Atanmış üye yok.`,editCostCenter:`Masraf merkezini düzenle`,myCostCenters:`Masraf merkezlerim`,costCentersHint:`Bütçe sınırlarını gözden geçirin ve maliyetleri kontrol altında tutun`,noCostCenters:`Masraf merkezi bulunamadı.`,owner:`Sahip`,balance:`Hesap bakiyesi`,unlimited:`Sınırsız`,budgetPolicyHint:`Hesap bakiyeleri maliyetleri kaydeder. Baskı yalnızca seçilen masraf merkezinin bütçesiyle sınırlıdır; bütçe yoksa sınırsızdır.`,budget:`Bütçe`,shared:`Paylaşılan`,cannotEditPrivateCostCenter:`Özel masraf merkezleri burada düzenlenemez`,recentTransactions:`Son işlemler`,transactionsHint:`Türe ve masraf merkezine göre filtrele`,first:`İlk`,prev:`Önceki`,next:`Sonraki`,last:`Son`,pageNumberOf:`{{total}} sayfanın {{page}}. sayfası`,noTransactions:`Kullanılabilir işlem yok.`,noTransactionsForFilter:`Seçilen filtrelerle eşleşen işlem yok.`,costCenter:`Masraf merkezi`,balanceAfter:`İşlem sonrası bakiye`,userWithId:`Kullanıcı #{{id}}`,partial:`Kısmi`,editTransaction:`İşlemi düzenle`,selectCostCenter:`Masraf merkezi seç...`,costCenterRequired:`Lütfen bir masraf merkezi seçin`,amountExample:`örn. 4,00`,manualAdjustmentExample:`örn. Manuel ayarlama`,userRequired:`Lütfen bir kullanıcı seçin`,amountInvalid:`Tutar geçerli bir sayı olmalıdır`,createdCostCenter:`Masraf merkezi oluşturuldu`,createCostCenterFailed:`Masraf merkezi oluşturulamadı`,transactionDeleted:`İşlem silindi`,deleteTransactionFailed:`İşlem silinemedi`,transactionEdited:`İşlem güncellendi ve hesap defteri yeniden hesaplandı`,editTransactionFailed:`İşlem düzenlenemedi`,manualPrintCreated:`Manuel baskı ücreti eklendi ve hesap defteri yeniden hesaplandı`,manualPrintFailed:`Manuel baskı oluşturulamadı`,memberSaved:`Üye kaydedildi`,memberSaveFailed:`Üye kaydedilemedi`,memberRemoved:`Üye kaldırıldı`,memberRemoveFailed:`Üye kaldırılamadı`,costCenterNameRequired:`Masraf merkezi adı gereklidir`,costCenterUpdated:`Masraf merkezi güncellendi`,costCenterUpdateFailed:`Masraf merkezi güncellenemedi`,confirmDeleteCostCenter:`"{{name}}" masraf merkezi silinsin mi?`,costCenterDeleted:`Masraf merkezi silindi`,costCenterDeleteFailed:`Masraf merkezi silinemedi`,deleteTransactionConfirm:`Bu işlem silinsin mi? Bakiyeler otomatik olarak yeniden hesaplanacaktır.`,deposit:`Para yatırma`,withdraw:`Para çekme`,printCharge:`Baskı ücreti`,deleteTransaction:`İşlemi sil`},printers:{title:`Yazıcılar`,addPrinter:`Yazıcı Ekle`,addPreflight:{checking:`Bağlantı kontrol ediliyor...`,warning:`Bazı bağlantı kontrolleri başarısız oldu. Bu yazıcı çevrimdışı olarak görünebilir. Aşağıdaki kontrolleri inceleyin, düzeltebileceklerinizi düzeltin veya yine de kaydedin.`,back:`Geri`,saveAnyway:`Yine de kaydet`},editPrinter:`Yazıcıyı Düzenle`,deletePrinter:`Yazıcıyı Sil`,printerName:`Yazıcı Adı`,serialNumber:`Seri Numarası`,ipAddress:`IP Adresi / Ana Bilgisayar Adı`,accessCode:`Erişim Kodu`,model:`Model`,nozzleCount:`Nozul Sayısı`,autoArchive:`Otomatik Arşivle`,status:{available:`Müsait`,idle:`Boşta`,printing:`Baskıda`,paused:`Duraklatıldı`,offline:`Çevrimdışı`,problem:`Sorun`,error:`Hata`,finished:`Tamamlandı`,unknown:`Bilinmiyor`},temperatures:{nozzle:`Nozul`,bed:`Tabla`,chamber:`Hazne`},heaterHistory:{title:`Isıtıcı Geçmişi`,openLabel:`Isıtıcı geçmişini görüntüle`,nozzle:`Nozul`,nozzle2:`Nozul 2`,bed:`Tabla`,chamber:`Hazne`,error:`Geçmiş yüklenemedi`,empty:`Henüz veri kaydedilmedi`},progress:`%{{percent}} tamamlandı`,timeRemaining:`{{time}} kaldı`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz?`,maintenanceOk:`Bakım Tamam`,maintenanceWarning:`{{count}} uyarı`,maintenanceWarning_plural:`{{count}} uyarı`,maintenanceDue:`{{count}} bekliyor`,maintenanceDue_plural:`{{count}} bekliyor`,sort:{name:`Ad`,status:`Durum`,model:`Model`,location:`Konum`,eta:`Kalan süre`,ascending:`Artan sırala`,descending:`Azalan sırala`},cardSize:{small:`Küçük kartlar`,medium:`Orta kartlar`,large:`Büyük kartlar`,extraLarge:`Çok büyük kartlar`},pageView:{openCamWallPage:`Kamera duvarını sayfa olarak aç`,cards:`Kartlar`,camWall:`Kamera duvarı`},camWall:{page:{tokenRejected:`Bu kamera duvarı bağlantısı artık geçerli değil. Belirtecin süresi dolmuş veya belirteç iptal edilmiş olabilir.`,loadFailed:`Yazıcılar yüklenemedi.`},noPrinters:`Gösterilecek yazıcı yok`,noSignal:`Sinyal yok`,live:`Canlı`,snap:`Foto`,off:`Kapalı`,summary:`{{live}} canlı, {{snap}} fotoğraf, toplam {{total}}`,layer:`Katman {{cur}}/{{total}}`,timeLeft:`{{time}} kaldı`,statusMode:{off:`Kapalı`,compact:`Sade`,full:`Tam`},settings:{title:`Kamera duvarı ayarları`,maxLive:`Maks. canlı yayın`,maxLiveHint:`Aynı anda kaç döşemenin canlı yayın yaptığı. Diğerleri foto olarak yenilenir.`,snapshotInterval:`Foto aralığı (saniye)`,snapshotIntervalHint:`Canlı olmayan döşemelerin ne sıklıkla yeni bir foto aldığı.`,statusOverlay:`Durum kaplaması`,statusOverlayHint:`Sade: yalnızca durum rozeti. Tam: + ilerleme, katman, kalan süre.`}},hideOffline:`Çevrimdışı olanları gizle`,nextAvailable:`Sıradaki müsait`,powerOn:`Aç`,offlinePrintersWithPlugs:`Akıllı prizli çevrimdışı yazıcılar`,noPrintersConfigured:`Henüz yapılandırılmış yazıcı yok`,search:`Yazıcı ara...`,noSearchResults:`Aramanıza veya filtrelerinize uyan yazıcı yok`,filter:{allStatuses:`Tüm durumlar`,allLocations:`Tüm konumlar`},toolbar:{filters:`Filtreler`,view:`Görünüm`,actions:`İşlemler`},readyToPrint:`Baskıya hazır`,external:`Harici`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Baskı arşivlerini sil`,noLabel:`Etiket yok`,printPreview:`Baskı önizleme`,width:`Genişlik`,height:`Yükseklik`,noObjectsFound:`Nesne bulunamadı`,objectsLoadedOnPrintStart:`Nesneler baskı başladığında yüklenir`,willBeSkipped:`Atlanacak`,name:`Ad`,serialCannotBeChanged:`Seri numarası değiştirilemez`,locationHelp:`Yazıcıları gruplamak ve kuyruk işlerini filtrelemek için kullanılır`,wifiSignal:{veryWeak:`Çok zayıf`,weak:`Zayıf`,fair:`Orta`,good:`İyi`,excellent:`Mükemmel`},maintenanceUpToDate:`Tüm bakım güncel - Görüntülemek için tıklayın`,maintenance:{title:`Bakımda`,subtitle:`Bu yazıcı duraklatıldı — bağlı değil, kuyruğa uygun değil, bildirim göndermiyor.`,pillLabel:`Bakım`,exitButton:`Bakımdan çık`,menuEnter:`Bakım moduna gir`,menuExit:`Bakım modundan çık`,toastEntered:`{{name}} artık bakım modunda`,toastExited:`{{name}} tekrar çevrimiçi`,confirmMidPrintTitle:`Yazdırma sırasında bakım moduna geçilsin mi?`,confirmMidPrintMessage:`{{name}} şu anda yazdırıyor. Bakım moduna geçmek MQTT bağlantısını kesecek ve bu iş için ilerleme takibi ile tamamlanma bildirimlerini durduracak. Devam edilsin mi?`,editFieldLabel:`Bakım modu`,editFieldHelp:`Etkinleştirildiğinde, bu yazıcı MQTT, kuyruk gönderimi ve bildirimlerden duraklatılır — tamir, paralel Bambuddy kurulumları veya geçici askıya alma için kullanışlıdır.`},chamberLightOn:`Hazne ışığını aç`,chamberLightOff:`Hazne ışığını kapat`,files:`Dosyalar`,browseFiles:`Yazıcı dosyalarına göz at`,autoOffAfterPrint:`Baskı sonrası otomatik kapat`,autoOffExecuted:`Otomatik kapama uygulandı - sıfırlamak için yazıcıyı açın`,hmsErrors:`HMS Hataları`,viewHmsErrors:`{{count}} HMS hatasını gör`,resume:`Devam Et`,pause:`Duraklat`,stop:`Durdur`,camera:`Kamera`,skipObject:`Nesneyi Atla`,reconnect:`Yeniden Bağlan`,forceRefresh:`Zorla Yenile`,forceRefreshSuccess:`Yenileme istendi`,mqttDebug:`MQTT Hata Ayıklama`,printerInformation:`Yazıcı Bilgisi`,copyToClipboard:`Kopyala`,copied:`Kopyalandı!`,state:`Durum`,wifiSignalLabel:`WiFi Sinyali`,developerMode:`Geliştirici Modu`,enabled:`Etkin`,disabled:`Devre dışı`,addedOn:`Eklendi`,sdCard:`SD Kart`,inserted:`Takılı`,notInserted:`Takılı değil`,totalPrintHours:`Baskı Saatleri`,activeNozzle:`Aktif: {{nozzle}} nozul`,amsSwitchInletTooltip:`Filament Hattı Değiştirici IN-{{inlet}} ({{side}}) — her iki nozulu besler`,nozzleRack:`Nozul Rafı`,nozzleDocked:`Yuvalanmış`,nozzleMounted:`Takılı`,nozzleActive:`Aktif`,nozzleIdle:`Boşta`,nozzleDiameter:`Çap`,nozzleType:`Tür`,nozzleStatus:`Durum`,nozzleFilament:`Filament`,nozzleWear:`Aşınma`,nozzleMaxTemp:`Maks. Sıcaklık`,nozzleSerial:`Seri`,nozzleHardenedSteel:`Sertleştirilmiş Çelik`,nozzleStainlessSteel:`Paslanmaz Çelik`,nozzleTungstenCarbide:`Tungsten Karbür`,nozzleFlow:`Akış`,nozzleHighFlow:`Yüksek Akış`,nozzleStandardFlow:`Standart`,firmwareUpdate:`Firmware Güncellemesi`,firmwareInstructions:`Yazıcının dokunmatik ekranında şuraya gidin:`,firmwareNav:`Şuraya gidin`,settings:`Ayarlar`,firmware:`Firmware`,discoverPrinters:`Yazıcıları Keşfet`,searching:`Aranıyor...`,manualEntry:`Manuel Giriş`,addFromCloud:`Bulut'tan Ekle`,toast:{printerDeleted:`Yazıcı silindi`,missingSpoolAssignment:`{{printer}} üzerinde baskı başladı. Şunlar için eksik makara ataması: {{slots}}`,killSwitchTriggered:`Faturalandırma durdurma anahtarı {{printer}} üzerindeki yetkisiz baskıyı durdurdu: {{filename}}`,billingChargeFailed:`{{printer}} üzerindeki {{filename}} için faturalandırma başarısız oldu. Bütçe rezervasyonu korundu; sunucu günlüklerini kontrol edin.`,assignmentVerified:`{{slot}} yuvasına filament yüklendi ({{printer}})`,assignmentVerifiedNoKprofile:`{{printer}} üzerindeki {{slot}} yuvası yüklendi, ancak akış kalibrasyonu profili (K profili) uygulanmadı`,assignmentNotConfirmed:`{{printer}} üzerindeki {{slot}} yuvası ataması doğrulanamadı — AMS yuvasını kontrol edin`,printerAdded:`Yazıcı eklendi`,printerUpdated:`Yazıcı güncellendi`,failedToDelete:`Yazıcı silinemedi`,failedToAdd:`Yazıcı eklenemedi`,connectionFailedNotAdded:`Yazıcıya bağlanılamadı. IP, seri numarası ve erişim kodunu doğrulayın ve yalnızca LAN modunun açık olduğunu onaylayın. Yazıcı eklenmedi.`,failedToUpdate:`Yazıcı güncellenemedi`,commandSent:`Komut gönderildi`,failedToSendCommand:`Komut gönderilemedi`,turnedOn:`{{name}} açıldı`,failedToPowerOn:`{{name}} açılamadı`,scriptTriggered:`Betik tetiklendi`,printStopped:`Baskı durduruldu`,printPaused:`Baskı duraklatıldı`,printResumed:`Baskıya devam edildi`,referenceDeleted:`Referans silindi`,detectionAreaSaved:`Algılama alanı kaydedildi`,failedToRunScript:`Betik çalıştırılamadı`,failedToStopPrint:`Baskı durdurulamadı`,failedToPausePrint:`Baskı duraklatılamadı`,failedToResumePrint:`Baskıya devam edilemedi`,failedToControlChamberLight:`Hazne ışığı kontrol edilemedi`,failedToSetSpeed:`Baskı hızı ayarlanamadı`,failedToUpdateSetting:`Ayar güncellenemedi`,failedToSkipObjects:`Nesneler atlanamadı`,failedToRereadRfid:`RFID yeniden okunamadı`,failedToCheckPlate:`Plaka kontrol edilemedi`,failedToUpdateLabel:`Etiket güncellenemedi`,failedToDeleteReference:`Referans silinemedi`,failedToSaveDetectionArea:`Algılama alanı kaydedilemedi`,plateCheckEnabled:`Plaka kontrolü etkinleştirildi`,plateCheckDisabled:`Plaka kontrolü devre dışı bırakıldı`,calibrationSaved:`Kalibrasyon kaydedildi!`,calibrationFailed:`Kalibrasyon başarısız`,rfidRereadInitiated:`RFID yeniden okuma başlatıldı`,loadInitiated:`Filament yükleniyor…`,unloadInitiated:`Filament çıkarılıyor…`,failedToLoad:`Filament yüklenemedi`,failedToUnload:`Filament çıkarılamadı`},connection:{connected:`Bağlı`,offline:`Çevrimdışı`},plateStatus:{markCleared:`Plakayı temizlendi olarak işaretle`,cleared:`Plaka Temiz`,notCleared:`Plaka Temiz Değil`,inUse:`Plaka Kullanımda`},queue:{inQueue:`Kuyrukta {{count}} baskı`,inQueue_plural:`Kuyrukta {{count}} baskı`},controls:`Kontroller`,rfid:{reread:`RFID'yi yeniden oku`},ams:{load:`Yükle`,unload:`Çıkar`,feedTitle:`{{slot}} hangi nozüle yüklensin?`,feedPrompt:`Filament Track Switch bu yuvayı her iki hotend'e de yönlendirebilir. Hangisinin besleneceğini seçin.`,feedLeft:`Sol nozül`,feedRight:`Sağ nozül`,feedAlreadyLoaded:`Zaten yüklü`,switchNotReady:`Filament Track Switch henüz kurulmadı. Yazıcıda her AMS'yi bir girişe atayın ve tekrar deneyin.`},bedJog:{limitWarning:`Manuel hareketlerde hareket sınırları uygulanmaz — bir Bambu donanım yazılımı hatası, uzaktan komutlarda yazılım limit anahtarlarını yok sayar. Çarpışmayı önlemek için dikkatlice hareket ettirin.`,title:`Jog kontrolleri`,bed:`Tabla`,step:`Adım (mm)`,up:`Plakayı yukarı hareket ettir`,down:`Plakayı aşağı hareket ettir`,toolheadUp:`Baskı kafasını yukarı hareket ettir`,toolheadDown:`Baskı kafasını aşağı hareket ettir`,disabledWhilePrinting:`Baskı sırasında devre dışı`,notHomedTitle:`Yazıcı sıfırlanmamış`,notHomedMessage:`Yazıcı son baskıdan bu yana sıfırlanmadı. Güvenli konumlandırma için önce otomatik sıfırlamayı çalıştırın (kafayı park eder, ardından X, Y ve Z sıfırlanır) veya yine de hareket ettirin — yazılım son durakları atlanır.`,homeZ:`Otomatik Sıfırla`,moveAnyway:`Yine de hareket ettir`,homingStarted:`Yazıcı otomatik sıfırlanıyor…`},permission:{noAdd:`Yazıcı eklemek için izniniz yok`,noEdit:`Yazıcıları düzenlemek için izniniz yok`,noDelete:`Yazıcıları silmek için izniniz yok`,noControl:`Yazıcıları kontrol etmek için izniniz yok`,noFiles:`Yazıcı dosyalarına erişim izniniz yok`,noAmsRfid:`AMS RFID'yi yeniden okumak için izniniz yok`,noSmartPlugControl:`Akıllı prizleri kontrol etme izniniz yok`,noCamera:`Kameraları görüntüleme izniniz yok`},modal:{addTitle:`Yazıcı Ekle`,editTitle:`Yazıcıyı Düzenle`,myPrinter:`Yazıcım`,selectModel:`Model seç...`,locationGroup:`Konum / Grup (isteğe bağlı)`,locationPlaceholder:`örn., Atölye, Ofis, Bodrum`,autoArchiveLabel:`Tamamlanan baskıları otomatik arşivle`,fromPrinterSettings:`Yazıcı ayarlarından`,modelOptional:`Model (isteğe bağlı)`,saveChanges:`Değişiklikleri Kaydet`},skipObjects:{tooltip:`Nesneleri atla`,onlyWhilePrinting:`Nesneleri atla (yalnızca baskı sırasında)`,requiresMultiple:`Nesneleri atla (2+ nesne gerektirir)`,title:`Nesneleri Atla`,matchIdsInfo:`ID'leri yazıcı ekranınızla eşleştirin`,printerShowsIds:`Yazıcı ekranı baskı plakasındaki nesne ID'lerini gösterir`,skipSelected:`Seçilenleri Atla`,skipping:`Atlanıyor...`,noObjectsSelected:`Hiçbir nesne seçilmedi`,selectObjectsToSkip:`Mevcut baskıdan atlamak istediğiniz nesneleri seçin`,skipped:`atlandı`,objectsSkipped:`Nesneler atlandı`,activeCount:`{{count}} aktif`,waitForLayer:`Nesneleri atlamak için 2+ katmanı bekleyin (şu an katman {{layer}})`,skip:`Atla`,confirmTitle:`Nesne Atlansın mı?`,confirmMessage:`"{{name}}" atlamak istediğinizden emin misiniz? Bu geri alınamaz.`,confirmAllMessage:`Kalan tüm nesneler seçildi. Bu, yazdırma işini durduracaktır. Devam edilsin mi?`,confirmMultipleMessage:`Seçilen {{count}} nesne atlansın mı? Bu geri alınamaz.`},confirm:{deleteTitle:`Yazıcıyı Sil`,deleteMessage:`"{{name}}" silmek istediğinizden emin misiniz? Bu, tüm bağlantı ayarlarını kaldıracak.`,deleteArchivesNote:`Bu yazıcı için tüm baskı geçmişi kalıcı olarak silinecek.`,keepArchivesNote:`Baskı geçmişi saklanacak ancak artık bu yazıcıyla ilişkilendirilmeyecek.`,stopTitle:`Baskıyı Durdur`,stopMessage:`"{{name}}" üzerindeki mevcut baskıyı durdurmak istediğinizden emin misiniz? Bu, baskı işini iptal edecek.`,stopButton:`Baskıyı Durdur`,pauseTitle:`Baskıyı Duraklat`,pauseMessage:`"{{name}}" üzerindeki mevcut baskıyı duraklatmak istediğinizden emin misiniz?`,pauseButton:`Baskıyı Duraklat`,resumeTitle:`Baskıya Devam Et`,resumeMessage:`"{{name}}" üzerindeki baskıya devam etmek istediğinizden emin misiniz?`,resumeButton:`Baskıya Devam Et`,powerOnTitle:`Yazıcıyı Aç`,powerOnMessage:`"{{name}}" için gücü AÇMAK istediğinizden emin misiniz?`,powerOnButton:`Aç`,powerOffTitle:`Yazıcıyı Kapat`,powerOffMessage:`"{{name}}" için gücü KAPATMAK istediğinizden emin misiniz?`,powerOffWarning:`UYARI: "{{name}}" şu anda baskı yapıyor! Gücü KAPATMAK istediğinizden emin misiniz? Bu, baskıyı kesintiye uğratacak ve yazıcıya zarar verebilir.`,powerOffButton:`Kapat`,haToggleTitle:`"{{name}}" Aç/Kapat`,haToggleMessage:`Home Assistant varlığı {{entity}} açılıp kapatılsın mı? Şu anda açıksa güç kesilebilir.`,haToggleWarning:`UYARI: "{{name}}" şu anda baskı yapıyor! {{entity}} açılıp kapatılması gücü kesip baskıyı kesintiye uğratabilir. Devam edilsin mi?`,haToggleButton:`Aç/Kapat`},bulk:{select:`Seç`,selectAll:`Tümünü Seç`,selectByLocation:`Konuma Göre Seç`,selected:`{{count}} seçildi`,actions:{stop:`Durdur`,pause:`Duraklat`,resume:`Devam Et`,clearPlate:`Tablayı Temizle`,clearHMS:`Bildirimleri Temizle`},confirm:{stopTitle:`{{count}} Baskıyı Durdur`,stopMessage:`Bu, {{count}} yazıcı üzerindeki aktif baskıları iptal edecek. Bu işlem geri alınamaz.`,stopButton:`Hepsini Durdur`,pauseTitle:`{{count}} Baskıyı Duraklat`,pauseMessage:`Bu, {{count}} yazıcı üzerindeki aktif baskıları duraklatacak.`,pauseButton:`Hepsini Duraklat`,clearPlateTitle:`{{count}} Baskı Tablasını Temizle`,clearPlateMessage:`Bu, {{count}} yazıcının baskı tablasını temizleyecek ve kuyruktaki işleri tetikleyebilir.`,clearPlateButton:`Hepsini Temizle`},success:`{{count}} yazıcı üzerinde {{action}} tamamlandı`,partial:`{{succeeded}} başarılı, {{failed}} başarısız`,noneApplicable:`Seçilen yazıcılar bu işlem için doğru durumda değil`,selectByState:`Duruma Göre Seç`},discovery:{title:`Yazıcıları Keşfet`,searching:`Aranıyor...`,scanning:`Taranıyor...`,scanProgress:`Taranıyor... {{scanned}}/{{total}}`,foundPrinters:`{{count}} yazıcı bulundu`,noPrintersFound:`Yazıcı bulunamadı`,noPrintersFoundSubnet:`Belirtilen alt ağda yazıcı bulunamadı.`,noPrintersFoundNetwork:`Ağda yazıcı bulunamadı.`,allConfigured:`Keşfedilen tüm yazıcılar zaten yapılandırılmış.`,alreadyAdded:`Zaten eklendi`,select:`Seç`,manualEntry:`Manuel Giriş`,addFromCloud:`Bulut'tan Ekle`,subnetToScan:`Taranacak alt ağ`,dockerNote:`Docker algılandı. Yazıcınızın alt ağını CIDR gösteriminde girin. docker-compose.yml'de network_mode: host gerektirir.`,scanSubnet:`Yazıcılar için Alt Ağı Tara`,discoverNetwork:`Ağda Yazıcıları Keşfet`,scanningSubnet:`Bambu yazıcıları için alt ağ taranıyor...`,scanningNetwork:`Ağ taranıyor...`,serialRequired:`Seri numarası gerekli`,unknown:`Bilinmiyor`,failedToStart:`Keşif başlatılamadı`,customSubnetOption:`Özel alt ağ...`,customSubnetLabel:`Özel alt ağ (CIDR)`,customSubnetNote:`Yazıcınız bu sunucudan farklı bir ağda ise özel bir alt ağ kullanın. FTP (990) ve MQTT (8883) bağlantı noktaları yönlendirme sınırı boyunca erişilebilir olmalıdır.`},drying:{start:`Kurutmayı Başlat`,stop:`Kurutmayı Durdur`,temperature:`Sıcaklık`,duration:`Süre`,hours:`saat`,timeRemaining:`{{time}} kaldı`,active:`Kurutuluyor`,targetSummary:`{{filament}} @ {{temp}}°C`,notSupported:`Kurutma desteklenmiyor`,powerRequired:`Kurutmayı etkinleştirmek için AMS güç adaptörünü bağlayın`,cannotDryNow:`AMS şu anda kurutmayı başlatamıyor`,startingDrying:`Kurutma başlatılıyor...`,toastCommandSent:`Kurutma komutu gönderildi`,toastStopped:`Kurutma durduruldu`,toastNotStarted:`Yazıcı komutu kabul etti ancak AMS kurutmayı başlatmadı. AMS güç adaptörünün bağlı olduğundan ve yazıcının boşta olduğundan emin olun.`,screenOnly:`Bu yazıcıda AMS kurutma yalnızca yazıcının kendi ekranından kontrol edilebilir (Bambu kısıtlaması)`,stoppingDrying:`Kurutma durduruluyor...`,rotateTray:`Kurutma sırasında makarayı döndür`,rotateUnavailableReason:`Kullanılamaz — bu AMS'nin bir yuvası kafaya doğru yüklenmiş durumda. Makara besleme borusu tarafından kilitlendiği için döndürülemez. Önce filamenti geri çekin.`,startMode:`Başlangıç zamanı`,modeNow:`Şimdi`,modeDelay:`Gecikme sonrası`,modeAtTime:`Belirli saatte`,schedule:`Zamanla`,scheduledFor:`Kurutma {{time}} için zamanlandı`,scheduledAsap:`Kurutma zamanlandı (yazıcı bekleniyor)`,cancelScheduled:`Zamanlanmış kurutmayı iptal et`,scheduleFailed:`Kurutma zamanlanamadı`,retractFilament:`Kurutmayı başlatmak için AMS çıkışındaki filamenti geri çekin`,waitingAmsNotFound:`AMS algılanması bekleniyor`,waitingOffline:`Yazıcının çevrimiçi olması bekleniyor`,waitingPrinterBusy:`Yazıcının boşalması bekleniyor`,waitingAlreadyDrying:`Mevcut kurutma döngüsünün bitmesi bekleniyor`,waitingInterrupted:`Kesildi, yazıcı boşaldığında yeniden başlayacak`,scheduleFailedReason:`Zamanlanmış kurutma başarısız oldu: {{reason}}`,scheduleFailedUnknown:`Bilinmeyen hata`,dismissFailed:`Kapat`},amsBackup:{titleOn:`AMS Filament Backup AÇIK. Devre dışı bırakmak için tıklayın.`,titleOff:`AMS Filament Backup KAPALI. Etkinleştirmek için tıklayın.`,titleUnknown:`Bu yazıcıda AMS Filament Backup durumu kullanılamıyor.`,toastEnabled:`AMS Filament Backup etkinleştirildi`,toastDisabled:`AMS Filament Backup devre dışı bırakıldı`,modalTitle:`AMS Filament Backup`,modalHelp:`Aktif slot tükendiğinde, yazıcı aynı ön ayar ve renkteki slotları bu sırayla dolaşır.`,modalNoSlots:`Yüklenmiş filament yok.`,modalNoPairs:`Yedek çifti yok — hiçbir slot çifti aynı ön ayar ve rengi paylaşmıyor.`,extruderRightShort:`S`,extruderLeftShort:`L`,stateOn:`Etkin`,stateOff:`Devre dışı`,stateUnknown:`Bu yazıcıda desteklenmiyor`},activeJobSlot:{title:`Bu slot, aktif baskıdaki {{n}} numaralı filament`,ariaLabel:`Aktif baskı slotu {{n}}`},expectedSlot:{title:`Yazıcı bu slotta filament bekliyor`,ariaLabel:`Beklenen filament slotu {{n}}`,label:`{{ams}} · Slot {{slot}}`,external:`Harici makara`},filaments:`Filamentler`,externalSpool:{hide:`Harici makarayı gizle`,show:`Harici makarayı göster`},openCameraOverlay:`Kamera bindirmesini aç`,openCameraWindow:`Kamerayı yeni pencerede aç`,firmwareUpdateAvailable:`Firmware güncellemesi mevcut: {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — Güncel`,firmwareUpdateButton:`Güncelle`,plateDetection:{noPermission:`Yazıcıları güncellemek için izniniz yok`,enabledClick:`Plaka kontrolü etkin - Devre dışı bırakmak için tıklayın`,disabledClick:`Plaka kontrolü devre dışı - Etkinleştirmek için tıklayın`,manageCalibration:`Plaka algılama kalibrasyonunu yönet`,calibrationRequired:`Kalibrasyon Gerekli`,calibrationInstructions:`Lütfen baskı plakasının <strong>tamamen boş</strong> olduğundan emin olun, ardından Kalibre Et'e tıklayın.`,calibrationDescription:`Kalibrasyon, boş plakanın referans görüntüsünü yakalar. Gelecekteki kontroller, nesneleri algılamak için bu referansa karşı karşılaştırılır.`,calibrationTip:`<strong>İpucu:</strong> Farklı plakalar için 5 kalibrasyona kadar saklayabilirsiniz. Sistem, kontrol sırasında en iyi eşleşmeyi otomatik olarak kullanır.`,plateEmpty:`Plaka boş görünüyor`,objectsDetected:`Plakada nesneler algılandı`,confidence:`Güven`,difference:`Fark`,analysisPreview:`Analiz önizlemesi:`,analysisLegend:`Yeşil kutu = algılama alanı, Kırmızı kaplama = kalibrasyondan farklar`,savedReferences:`Kaydedilen Referanslar ({{count}}/{{max}})`,deleteReference:`Referansı sil`,labelPlaceholder:`Etiket...`,clickToEdit:`{{label}} - Düzenlemek için tıklayın`,clickToAddLabel:`Etiket eklemek için tıklayın`},speed:{title:`Baskı Hızı`,silent:`Sessiz (%50)`,standard:`Standart (%100)`,sport:`Spor (%124)`,ludicrous:`Çılgın (%166)`},airduct:{title:`Hava Kanalı Modu`,cooling:`Soğutma`,heating:`Isıtma`},noSdCard:`SD Yok`,door:{open:`Açık`,closed:`Kapalı`},fans:{partCooling:`Parça Soğutma Fanı`,auxiliary:`Yardımcı Fan`,leftAuxiliary:`Sol Yardımcı Fan`,exhaust:`Egzoz`,chamber:`Hazne Fanı`},clickToViewHmsErrors:`HMS hatalarını görüntülemek için tıklayın`,aiDetection:{safe:`Güvenli`,warning:`Uyarı`,failure:`Başarısızlık`,idle:`Boşta`,error:`Kontrol etmiyor`,unknown:`Başlatılıyor`,tooltipError:`AI Başarısızlık Algılama bu baskıyı kontrol etmiyor: {{reason}} - ayrıntılar için tıklayın`,tooltipUnknown:`AI Başarısızlık Algılama: ilk sonuç bekleniyor - ayrıntılar için tıklayın`,errorHint:`Bu baskı kontrol edilmiyor. Aşağıdaki sorun giderildiğinde algılama otomatik olarak devam eder.`,tooltip:`AI Başarısızlık Algılama: {{status}} (puan {{score}}) - ayrıntılar için tıklayın`,tooltipIdle:`AI Başarısızlık Algılama etkin - izleme bir sonraki baskıyla başlar - ayrıntılar için tıklayın`,modalTitle:`AI Başarısızlık Algılama - {{name}}`,currentStatus:`Durum`,score:`Puan`,framesAnalyzed:`Analiz edilen kareler`,idleHint:`Şu anda izlenen bir baskı yok. İzleme bir sonraki baskıyla otomatik olarak başlar.`,lastError:`Son hata`,openSettings:`Ayarları aç`},estimatedCompletion:`Tahmini tamamlanma süresi`,plateNumber:`Plaka {{number}}`,slotOptions:`Yuva seçenekleri`,amsPopup:{friendlyName:`AMS Adı`,friendlyNamePlaceholder:`örn. AMS Kolay Adı`,serialNumber:`Seri Numarası`,firmwareVersion:`Firmware`,save:`Kaydet`,clear:`Temizle`,noEditPermission:`AMS birimlerini yeniden adlandırma izniniz yok`},firmwareModal:{title:`Firmware Güncellemesi`,titleUpToDate:`Firmware Bilgisi`,currentVersion:`Mevcut:`,latestVersion:`En son:`,releaseNotes:`Sürüm Notları`,checkingPrereqs:`Önkoşullar kontrol ediliyor...`,sdCardReady:`SD kart hazır. Firmware yüklemek için aşağıya tıklayın.`,uploadedSuccess:`Firmware SD karta yüklendi!`,applyInstructions:`Güncellemeyi yazıcınıza uygulamak için:`,step1:`Yazıcının dokunmatik ekranında <strong>Ayarlar</strong>'a gidin`,step2:`<strong>Firmware</strong>'e gidin`,step3:`<strong>SD karttan güncelle</strong>'yi seçin`,step4:`Güncelleme 10-20 dakika sürer`,done:`Tamam`,starting:`Başlatılıyor...`,uploadFirmware:`Firmware Yükle`,uploadFailed:`Yükleme başlatılamadı: {{error}}`,uploadedToast:`Firmware yüklendi! Güncellemeyi yazıcı ekranından tetikleyin.`,availableVersions:`Kullanılabilir sürümler`,usable:`Kullanılabilir`,unavailable:`Kullanılamaz`,installed:`Yüklü`,newerBadge:`daha yeni`,olderBadge:`daha eski`,currentBadge:`mevcut`},accessCodePlaceholder:`Mevcut olanı korumak için boş bırakın`,roi:{title:`Algılama Alanı (ROI)`,xStart:`X Başlangıç`,yStart:`Y Başlangıç`,width:`Genişlik`,height:`Yükseklik`,instruction:`Baskı plakasına odaklanmak için algılama alanını ayarlayın. Önizlemedeki yeşil kutu mevcut alanı gösterir.`},developerModeWarning:`Geliştirici LAN modu şunlarda etkin değil: {{names}}. Bazı özellikler çalışmayabilir.`,howToEnable:`Nasıl etkinleştirilir`,incompatibleFile:`Bu dosya {{slicedFor}} için dilimlendi, ancak bu yazıcı bir {{printerModel}}`,dropNotPrintable:`Yalnızca .gcode ve .gcode.3mf dosyaları yazdırılabilir`,dropToPrint:`Yazdırmak için bırakın`,dropToQueue:`Kuyruğa eklemek için bırakın`},archives:{media:{title:`Baskı videoları`,download:`Baskı videolarını indir`,searching:`Yazıcıda video aranıyor…`,searchFailed:`Yazıcıdaki videolar kontrol edilemedi.`,none:`Bu baskı için hızlandırılmış çekim veya IP kamera parçası bulunamadı.`,attachedTimelapse:`Ekli hızlandırılmış çekim`,printerFiles:`Yazıcıda kalan dosyalar`,downloadSelected:`Seçilenleri indir`,printerMissing:`Yazıcı artık yapılandırılmış değil`,timelapseUnavailable:`Hızlandırılmış çekim dizini okunamadı`,ipcamUnavailable:`IP kamera dizini okunamadı`},title:`Baskı Arşivleri`,no3mfBanner:{title:`Bazı son baskılar küçük resimlerle birlikte arşivlenemedi`,body:`Dilimleyici yazıcının SD kartına .gcode.3mf dosyasını bırakmadı, bu nedenle Bambuddy küçük resmi veya dilimleyici meta verilerini alamadı. Bu genellikle dilimleyicide (Bambu Studio / OrcaSlicer'in Cihaz sekmesi) "Gönderilen dosyaları harici depolamada sakla" seçeneğinin kapalı olmasından kaynaklanır.`,docsLink:`Kurulum adımı 4'ü görüntüle`,docsLinkInternalStorage:`Bu neden oluyor`,titleInternalStorage:`Bazı son baskılar yazıcının dahili depolamasında kaldı`,bodyInternalStorage:`Bambu Studio dilimlenmiş dosyayı karta değil yazıcının dahili depolamasına yazdı, bu yüzden Bambuddy'nin FTP üzerinden okuyacağı bir şey yoktu. H2 serisi, P2S ve X2D'de «Yazdır» düğmesi bunu her zaman yapar; seçim yalnızca «Gönder» ile mümkündür ve orada da varsayılan «Önbellek»tir. Bu baskılar adları ve süreleriyle yine arşivlenir, yalnızca küçük resim ve dilimleyici meta verileri olmadan. Eksiksiz arşivler için baskıyı Bambuddy üzerinden başlatın ya da OrcaSlicer ile dilimleyin; Bambu Studio kullanacaksanız «Gönder» ile «Harici» seçip baskıyı sonrasında başlatın. Hepsi yazıcıda kart ya da bellek gerektirir.`,titleNoExternalStorage:`Bazı son baskılar arşivlenemedi — yazıcıda depolama yok`,bodyNoExternalStorage:`Yazıcı yuvasında kart veya bellek bildirmiyor, bu yüzden dilimlenmiş dosyanın ineceği bir yer ve Bambuddy'nin okuyacağı bir şey yoktu. Bir tane takın, sonraki baskı eksiksiz arşivlenecek.`,titleInternalHistory:`Bazı son baskılar yazıcıda zaten bulunan bir dosyadan başlatıldı`,bodyInternalHistory:`Bu baskılar yazıcının kendi kitaplığından çalıştı — ekranından yeniden baskı, Handy üzerinden başlatma ya da daha önce gönderilip sonra basılan bir dosya. Bambuddy baskı dosyalarını FTP üzerinden okur, FTP ise yalnızca kartı veya belleği sunar; yazıcı bu kitaplığı FTP'nin ulaşamadığı bir alanda tutar, dolayısıyla okunacak bir 3MF yoktu. Hiçbir dilimleyici ayarı bunu değiştirmez, çünkü bu baskılar için hiçbir şey gönderilmedi. Adları ve süreleriyle arşivlenmeye devam ederler ve "Arşivi Düzenle" ile kullanılan filamenti elle girebilirsiniz. Eksiksiz bir arşiv için baskıyı Bambuddy'den ya da dilimleyicinizden başlatın.`,titleFtpsCooloff:`Bazı son baskılar arşivlenemedi — yazıcı dosya bağlantısını reddetti`,bodyFtpsCooloff:`Bambuddy yazıcının dosya aktarım portunu (FTPS 990) açtı ve yazıcı TLS olmayan bir şeyle yanıt verdi, bu yüzden ondan hiçbir şey okunamadı. O baskılar adları ve süreleriyle yine arşivlenir, yalnızca küçük resim ve dilimleyici meta verileri olmadan. Bu bir dilimleyici ayarı değil ve sizin değiştirdiğiniz bir şey de değil — aynı modeller ve aynı ürün yazılımları başka kurulumlarda sorunsuz çalışıyor ve etkilenen bir yazıcı genellikle bir süre sonra kendiliğinden yeniden çalışıyor. Böyle bir hatadan sonra Bambuddy o yazıcıya yapılan aktarımları beş dakika duraklatır ve duraklama bitince dosyayı yeniden almaya gelir; kısa bir kesinti böylece kendiliğinden düzelir, hâlâ boş duran bir kart ise reddin yeniden denemeden daha uzun sürdüğü anlamına gelir. Buna neyin yol açtığı henüz bilinmiyor. Tekrarlıyorsa Sistem sayfasından hata ayıklama günlüğünü açın ve bildiriminize bir destek paketi ekleyin.`,titleFtpTransferFailed:`Bazı son baskılar arşivlenemedi — dosya aktarımı süreye sığmadı`,bodyFtpTransferFailed:`Dilimlenmiş dosya yazıcının kartındaydı ve yazıcı dosyayı gerçekten sunuyordu, ancak aktarım izin verilen sürede tamamlanmadı. Baskı başlarken yazıcı aynı anda kamerasıyla, durum mesajlarıyla ve iş yüklemesiyle de ilgilenir; büyük bir 3MF bunların arasından her zaman geçemez. Bu baskılar adı ve süreleriyle hâlâ arşivde, yalnızca küçük resim ve dilimleyici verileri eksik. Bu bir dilimleyici ayarı değil ve sizin değiştirdiğiniz bir şeyden kaynaklanmıyor. Bambuddy sonraki on dakika içinde dosyayı üç kez daha almaya gider, bu yüzden çoğu kendiliğinden tamamlanır; hâlâ boş duran bir kart, o denemelerin de süreye sığmadığı anlamına gelir. Sık sık oluyorsa Ayarlar > Ağ > FTP Yeniden Deneme altındaki Bağlantı Zaman Aşımı değerini artırın.`,dismissLabel:`Bu bildirimi kapat`},searchPlaceholder:`Arşivlerde ara...`,filterByPrinter:`Yazıcıya göre filtrele`,filterByStatus:`Duruma göre filtrele`,sortBy:`Sıralama`,sortNewest:`Önce en yeni`,sortOldest:`Önce en eski`,sortName:`Ad`,sortDuration:`Süre`,sortLargest:`Önce en büyük`,sortSmallest:`Önce en küçük`,sortSize:`Boyut`,noArchives:`Arşiv bulunamadı`,noArchivesSearch:`Aramanızla eşleşen arşiv yok`,originalPrintNotVisible:`Orijinal baskı görünmüyor - filtreleri temizlemeyi deneyin`,noArchivesYet:`Henüz arşiv yok`,prints:`baskı`,pagination:{showing:`Gösterilen`,to:`-`,of:`/`,show:`Göster`,page:`Sayfa`,all:`Tümü`},loadingArchives:`Arşivler yükleniyor...`,releaseToUpload:`Yüklemek için bırakın`,showAll:`Tümünü göster`,showFavoritesOnly:`Yalnızca favorileri göster`,gridView:`Izgara görünümü`,listView:`Liste görünümü`,calendarView:`Takvim görünümü`,logView:`Baskı Günlüğü`,manageTags:`Etiketleri Yönet`,showFailedPrints:`Başarısız baskıları göster`,hideFailedPrints:`Başarısız baskıları gizle`,hideDuplicates:`Tekrarları Gizle`,viewOriginalPrint:`Orijinal baskıyı görüntülemek için tıklayın (#{{id}})`,printTime:`Baskı Süresi`,filamentUsed:`Kullanılan Filament`,cost:`Maliyet`,preview:`Önizleme`,deleteArchive:`Arşivi Sil`,deleteConfirm:`Bu arşivi silmek istediğinizden emin misiniz?`,favorite:`Favori`,unfavorite:`Favorilerden kaldır`,viewDetails:`Detayları Görüntüle`,status:{completed:`Tamamlandı`,failed:`Başarısız`,stopped:`Durduruldu`},toast:{source3mfAttached:`Kaynak 3MF eklendi: {{filename}}`,failedUploadSource3mf:`Kaynak 3MF yüklenemedi`,source3mfRemoved:`Kaynak 3MF kaldırıldı`,failedRemoveSource3mf:`Kaynak 3MF kaldırılamadı`,f3dAttached:`F3D eklendi: {{filename}}`,failedUploadF3d:`F3D yüklenemedi`,f3dRemoved:`F3D kaldırıldı`,failedRemoveF3d:`F3D kaldırılamadı`,timelapseAttached:`Zaman atlamalı video eklendi: {{filename}}`,timelapseAlreadyAttached:`Zaman atlamalı video zaten eklendi`,noMatchingTimelapse:`Eşleşen zaman atlamalı video bulunamadı`,failedScanTimelapse:`Zaman atlamalı video taranamadı`,failedAttachTimelapse:`Zaman atlamalı video eklenemedi`,timelapseRemoved:`Zaman atlamalı video kaldırıldı`,failedRemoveTimelapse:`Zaman atlamalı video kaldırılamadı`,timelapseUploaded:`Zaman atlamalı video yüklendi: {{filename}}`,failedUploadTimelapse:`Zaman atlamalı video yüklenemedi`,archiveDeleted:`Arşiv silindi`,failedDeleteArchive:`Arşiv silinemedi`,addedToFavorites:`Favorilere eklendi`,removedFromFavorites:`Favorilerden kaldırıldı`,projectUpdated:`Proje güncellendi`,failedUpdateProject:`Proje güncellenemedi`,linkCopied:`Bağlantı panoya kopyalandı`,failedCopyLink:`Bağlantı kopyalanamadı`,photoDeleted:`Fotoğraf silindi`,failedDeletePhoto:`Fotoğraf silinemedi`,failedDeleteArchives:`Arşivler silinemedi`,failedUpdateFavorites:`Favoriler güncellenemedi`,exportDownloaded:`Dışa aktarma indirildi`,exportFailed:`Dışa aktarma başarısız`},menu:{print:`Yazdır`,openInBambuStudio:`Dilimleyicide Aç`,slice:`Dilimle`,externalLink:`Harici Bağlantı`,viewOnMakerWorld:`MakerWorld'de Görüntüle`,preview3d:`3B Önizleme`,viewTimelapse:`Zaman Atlamalı Videoyu Görüntüle`,scanForTimelapse:`Zaman Atlamalı Video Tara`,uploadTimelapse:`Zaman Atlamalı Video Yükle`,removeTimelapse:`Zaman Atlamalı Videoyu Kaldır`,downloadSource3mf:`Kaynak 3MF İndir`,uploadSource3mf:`Kaynak 3MF Yükle`,replaceSource3mf:`Kaynak 3MF Değiştir`,removeSource3mf:`Kaynak 3MF Kaldır`,uploadF3d:`F3D Yükle`,replaceF3d:`F3D Değiştir`,downloadF3d:`F3D İndir`,removeF3d:`F3D Kaldır`,download:`İndir`,copyDownloadLink:`İndirme Bağlantısını Kopyala`,qrCode:`QR Kod`,viewPhotos:`Fotoğrafları Görüntüle`,viewPhotosCount:`Fotoğrafları Görüntüle ({{count}})`,projectPage:`Proje Sayfası`,addToFavorites:`Favorilere Ekle`,removeFromFavorites:`Favorilerden Kaldır`,edit:`Düzenle`,printLog:`Baskı Günlüğü`,goToProject:`Projeye Git: {{name}}`,addToProject:`Projeye Ekle`,removeFromProject:`Projeden Kaldır`,loading:`Yükleniyor...`,noProjectsAvailable:`Kullanılabilir proje yok`,searchProjects:`Projelerde ara…`,select:`Seç`,deselect:`Seçimi Kaldır`,delete:`Sil`},permission:{noReprint:`Bu arşivi yeniden yazdırma izniniz yok`,noAddToQueue:`Kuyruğa ekleme izniniz yok`,noUpdateArchives:`Arşivleri güncelleme izniniz yok`,noUploadFiles:`Dosya yükleme izniniz yok`,noDownload:`Arşivleri indirme izniniz yok`,noCopyLink:`İndirme bağlantılarını kopyalama izniniz yok`,noDelete:`Bu arşivi silme izniniz yok`,noEdit:`Bu girişi düzenleme izniniz yok`,noCreate:`Arşiv oluşturma izniniz yok`},platePicker:{title:`Önizleme için plaka seçin`,hint:`Bu arşivde birden fazla plaka var. GCode görüntüleyicide açmak için birini seçin.`,plateLabel:`Plaka {{index}}`,objectCount:`{{count}} nesne`,objectCount_plural:`{{count}} nesne`,noGcode:`Bu arşivin önizleme için dilimlenmiş G-kodu yok. Önce dilimlemek için Bambu Studio'da açın.`},card:{previousPlate:`Önceki plaka`,nextPlate:`Sonraki plaka`,plateNumber:`Plaka {{index}}`,moreOptions:`Daha fazla seçenek için sağ tıklayın`,addToFavorites:`Favorilere ekle`,removeFromFavorites:`Favorilerden kaldır`,cancelled:`iptal edildi`,failed:`başarısız`,duplicate:`tekrar`,duplicateTitle:`Bu model daha önce yazdırıldı`,openSource3mf:`Kaynak 3MF'yi Bambu Studio'da aç (daha fazla seçenek için sağ tıklayın)`,downloadF3d:`Fusion 360 tasarım dosyasını indir`,viewTimelapse:`Zaman atlamalı videoyu görüntüle`,viewPhoto:`1 fotoğrafı görüntüle`,viewPhotos:`{{count}} fotoğrafı görüntüle`,openFolder:`Klasörü aç: {{name}}`,slicedFile:`Dilimlenmiş dosya - yazdırmaya hazır`,sourceFile:`Yalnızca kaynak dosya - AMS eşlemesi mevcut değil`,gcode:`GCODE`,source:`KAYNAK`,project:`Proje: {{name}}`,runsBadge:`{{count}} baskı`,runsBadgeTitle:`Toplam {{count}} baskı — {{successful}} başarılı, {{failed}} başarısız. Tam baskı günlüğünü görmek için tıklayın.`,estimated:`Tahmini: {{time}}`,actual:`Gerçek: {{time}}`,accuracy:`Doğruluk: %{{percent}}`,filament:`{{weight}}g`,layer:`{{count}} katman`,layers:`{{count}} katman`,object:`{{count}} nesne`,objects:`{{count}} nesne`,slicedFor:`{{model}} için dilimlendi`,uploadedBy:`Yükleyen`,noPermissionReprint:`Yeniden yazdırma izniniz yok`,noFileForReprint:`Kullanılabilir 3MF dosyası yok — baskı kaydedildiğinde dosya yazıcıdan indirilemedi`,slicerAmsMapping:`AMS eşlemesi kaydedildi ({{printer}})`,slicerAmsMappingTooltip:`Dilimleyicinin AMS yuva seçimi {{printer}} için kaydedildi. Yuva numaraları yalnızca o yazıcıda anlamlıdır; bu nedenle yeniden yazdırma bunları yalnızca yine {{printer}} hedeflendiğinde kullanır.`,noPermissionEdit:`Arşivleri düzenleme izniniz yok`,noPermissionDelete:`Arşivleri silme izniniz yok`,openInBambuStudio:`Dilimleyicide Aç`,openInBambuStudioToSlice:`Dilimlemek için Dilimleyicide Aç`,slice:`Dilimle`,externalLink:`Harici Bağlantı`,makerWorld:`MakerWorld: {{designer}}`,viewProject:`Projeyi görüntüle`,noExternalLink:`Harici bağlantı yok`,preview3d:`3B Önizleme`,download:`İndir`,edit:`Düzenle`,delete:`Sil`},runLog:{title:`Baskı Günlüğü`,modalTitle:`Baskı Günlüğü — {{name}}`,modalTitleFallback:`bu arşiv`,empty:`Bu arşiv için henüz baskı olayı kaydedilmedi.`,col:{date:`Tarih`,status:`Durum`,duration:`Süre`,filament:`Filament`,cost:`Maliyet`},status:{completed:`Tamamlandı`,failed:`Başarısız`,cancelled:`İptal edildi`,stopped:`Durduruldu`,skipped:`Atlandı`,printing:`Yazdırılıyor`}},modal:{deleteArchive:`Arşivi Sil`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz? Bu işlem geri alınamaz.`,deleteButton:`Sil`,deletePurgeStats:`Ayrıca bu baskıyı Hızlı İstatistiklerden de kaldır (filament, süre, maliyet, enerji)`,deleteQueueItemsWarning:`Bu arşive bağlı {{count}} kuyruk öğesi de kaldırılacak.`,deleteBlockedByPrinting:`Silinemiyor — {{count}} kuyruk öğesi şu anda yazdırılıyor. Önce yazdırmayı durdurun, ardından tekrar deneyin.`,removeSource3mf:`Kaynak 3MF Kaldır`,removeSource3mfConfirm:`"{{name}}" dosyasından kaynak 3MF dosyasını kaldırmak istediğinizden emin misiniz? Bu, orijinal dilimleyici proje dosyasını silecek.`,removeButton:`Kaldır`,removeF3d:`F3D Kaldır`,removeF3dConfirm:`"{{name}}" dosyasından Fusion 360 tasarım dosyasını kaldırmak istediğinizden emin misiniz?`,removeTimelapse:`Zaman Atlamalı Videoyu Kaldır`,removeTimelapseConfirm:`"{{name}}" dosyasından zaman atlamalı videoyu kaldırmak istediğinizden emin misiniz?`,timelapse:`{{name}} - Zaman Atlamalı Video`,selectTimelapse:`Zaman Atlamalı Video Seç`,selectTimelapseDesc:`Otomatik eşleşme bulunamadı. Bu baskı için zaman atlamalı videoyu seçin:`,deleteArchives:`Arşivleri Sil`,deleteArchivesConfirm:`{{count}} arşivi silmek istediğinizden emin misiniz? Bu işlem geri alınamaz.`,deleteCount:`{{count}} Sil`},page:{title:`Arşivler`,printsCount:`{{total}} baskıdan {{filtered}} tanesi`,dropFilesHere:`.3mf dosyalarını buraya bırakın`,releaseToUpload:`Yüklemek için bırakın`,only3mfSupported:`Yalnızca .3mf dosyaları desteklenir`,close:`Kapat`,selected:`{{count}} seçildi`,selectAll:`Tümünü Seç`,tags:`Etiketler`,project:`Proje`,favorite:`Favori`,delete:`Sil`,toggledFavorites:`{{count}} arşiv için favoriler değiştirildi`,failedUpdateFavorites:`Favoriler güncellenemedi`,archivesDeleted:`{{count}} arşiv silindi`,failedDeleteArchives:`Arşivler silinemedi`,photoDeleted:`Fotoğraf silindi`,failedDeletePhoto:`Fotoğraf silinemedi`},list:{name:`Ad`,printer:`Yazıcı`,date:`Tarih`,size:`Boyut`,actions:`İşlemler`,hasTimelapse:`Zaman atlamalı videosu var`},log:{date:`Tarih`,printName:`Baskı Adı`,printer:`Yazıcı`,user:`Kullanıcı`,status:`Durum`,duration:`Süre`,filament:`Filament`,filamentUsed:`Kullanılan filament`,cost:`Maliyet`,energy:`Enerji`,energyCost:`Enerji maliyeti`,completedAt:`Bitti`,columns:`Sütunlar`,sortBy:`{{column}} ölçütüne göre sırala`,allPrinters:`Tüm Yazıcılar`,allUsers:`Tüm Kullanıcılar`,allStatuses:`Tüm Durumlar`,cancelled:`İptal edildi`,skipped:`Atlandı`,dateFrom:`Başlangıç`,dateTo:`Bitiş`,noEntries:`Baskı günlüğü kaydı bulunamadı`,showing:`{{total}} kayıttan {{count}} tanesi gösteriliyor`,rowsPerPage:`Satır`,page:`Sayfa`,prev:`Önceki`,next:`Sonraki`,clearLog:`Günlüğü Temizle`,clearLogTitle:`Baskı Günlüğünü Temizle`,clearLogConfirm:`Tüm baskı günlüğü kayıtları kalıcı olarak silinecek. Arşivler ve kuyruk öğeleri etkilenmeyecek. Bu işlem geri alınamaz. Emin misiniz?`,clearLogButton:`Hepsini Temizle`,cleared:`{{count}} günlük kaydı temizlendi`,clearFailed:`Baskı günlüğü temizlenemedi`,deleteEntryTitle:`Baskı günlüğü girişini sil`,deleteEntryConfirm:`Bu giriş günlükten kaldırılacak ve filament, süre ve maliyet katkıları Hızlı İstatistikler'den çıkarılacak. İlgili arşiv (varsa) etkilenmez. Bu işlem geri alınamaz.`,entryDeleted:`Baskı günlüğü girişi silindi`,entryDeleteFailed:`Baskı günlüğü girişi silinemedi`,editEntryTitle:`Baskı günlüğü girişini düzenle`,editEntryDescription:`Bu baskıyı sınıflandırın. Hata Analizi widget'ı bu değerlere göre gruplandırır, böylece güncellemeler istatistiklere anında yansır.`,entryUpdated:`Baskı günlüğü girişi güncellendi`,entryUpdateFailed:`Baskı günlüğü girişi güncellenemedi`,statuses:{completed:`Tamamlandı`,failed:`Başarısız`,stopped:`Durduruldu`,cancelled:`İptal edildi`,skipped:`Atlandı`}}},dispatchToast:{untitled:`Yazdırma işi`,startingPrints:`Yazdırmalar başlatılıyor`,progressSummary:`{{complete}}/{{total}} tamamlandı • İşleniyor: {{processing}}`,expandDetails:`Gönderim ayrıntılarını genişlet`,collapseDetails:`Gönderim ayrıntılarını daralt`,awaitingPrinter:`Yazıcı bekleniyor…`,status:{processing:`İşleniyor`,completed:`Tamamlandı`,failed:`Başarısız`},failed:{generic:`Gönderim başarısız`,upload_failed:`Yazıcıya yükleme başarısız`,start_command_failed:`Yazıcı başlatma komutunu reddetti`},dismiss:`Kapat`},pipelineRuns:{title:`Pipeline çalıştırmaları`,loading:`Yükleniyor…`,empty:`Henüz pipeline çalıştırması yok.`,filter:{pipeline:`Pipeline`,status:`Durum`,target:`Hedef`,all:`Tümü`,allPipelines:`Tüm pipeline'lar`,allStatus:`Tüm durumlar`,allTargets:`Tüm hedefler`,clear:`Filtreleri temizle`,noMatches:`Mevcut filtrelere uyan çalıştırma yok.`},totalCount_one:`{{n}} çalıştırma`,totalCount_other:`{{n}} çalıştırma`,copies:`{{n}} kopya`,failedCount:`{{n}} başarısız`,copyN:`Kopya {{n}}`,retryFailed:`Başarısızları tekrar dene`,retryOf:`#{{n}} yeniden denemesi`,pagination:`{{total}} içinden {{start}}–{{end}}`,toast:{cancelled:`Çalıştırma iptal edildi`,cancelFailed:`İptal başarısız`,retryStarted:`Yeniden deneme başlatıldı`,retryFailed:`Yeniden deneme başarısız`,cleared:`{{n}} çalıştırma temizlendi`,clearFailed:`Temizleme başarısız`},clearLog:`Geçmişi temizle`,clearConfirmTitle:`Geçmiş temizlensin mi?`,clearConfirmBody:`Tamamlanan, başarısız olan, iptal edilen ve kısmen başarısız tüm pipeline çalıştırmaları silinsin mi? Devam eden çalıştırmalar korunur. Bu geri alınamaz.`,clearConfirmAction:`Temizle`,jobStatus:{pending:`beklemede`,awaiting_printer:`yazıcı bekleniyor`,queued:`kuyrukta`,printing:`yazdırılıyor`,completed:`tamamlandı`,failed:`başarısız`,cancelled:`iptal edildi`},cancelledByUser:`Kullanıcı tarafından iptal edildi`},queue:{title:`Baskı Kuyruğu`,subtitle:`Baskı işlerinizi zamanlayın ve yönetin`,filamentShort:{rowBadge:`Atanan makara için yetersiz filament`,rowTooltip:`Sevk planlayıcı bu öğeyi işaretledi. Yuva başına eksikliği görmek ve yine de yazdırıp yazdırmayacağınıza karar vermek için Oynat'a tıklayın.`,confirmTitle:`Yetersiz filament`,confirmIntro:`Atanan makara en az bir yuvayı karşılayamıyor. Yine de yazdırılsın mı?`,lineItem:`Yuva {{slot}}: {{required}} g gerekli, {{remaining}} g kaldı`,unknown:`bilinmiyor`,printAnyway:`Yine de Yazdır`},slicerAmsMapping:{rowBadge:`Bu yazıcı için kaydedilen AMS yuvaları`,rowTooltip:`Bu arşiv, dilimleyicinin seçtiği tam AMS yuvalarını bu öğenin hedeflediği yazıcı için saklar. O yazıcıda yeniden yazdırma, tür ve renge göre yeniden eşleştirmek yerine bu makaraları yeniden kullanabilir.`},editQueueItem:`Kuyruk Öğesini Düzenle`,selectAllPlates:`Tüm {{count}} Plakayı Seç`,deselectAll:`Seçimi Kaldır`,printQueued:`Baskı kuyruğa eklendi`,printQueuedWillStartWhenIdle:`Yazıcı boştayken başlayacak`,itemsQueued:`{{count}} öğe kuyruğa eklendi`,sending:`Gönderiliyor...`,sendingProgress:`Gönderiliyor {{current}}/{{total}}...`,adding:`Ekleniyor...`,addingProgress:`Ekleniyor {{current}}/{{total}}...`,savingProgress:`Kaydediliyor {{current}}/{{total}}...`,clearQueue:`Kuyruğu Temizle`,clearHistory:`Geçmişi Temizle`,emptyQueue:`Kuyruk boş`,position:`Konum`,scheduledTime:`Zamanlanmış Süre`,moveUp:`Yukarı Taşı`,moveDown:`Aşağı Taşı`,startNow:`Şimdi Başlat`,printingInProgress:`Baskı devam ediyor...`,viewArchive:`Arşivi görüntüle`,viewInFileManager:`Dosya Yöneticisinde görüntüle`,itemCount:`{{count}} öğe`,itemCount_plural:`{{count}} öğe`,dragToReorder:`Yeniden sıralamak için sürükleyin (yalnızca ASAP)`,reorderHint:`Konum yalnızca ASAP öğelerini etkiler. Zamanlanmış öğeler belirlenen zamanlarında çalışır.`,sjf:{label:`SJF`,tooltip:`En Kısa İş İlk — planlayıcı daha kısa baskılara öncelik verir`},addedBy:`{{name}} tarafından eklendi`,nextInQueue:`Kuyrukta sıradaki`,clearPlateSuccess:`Plaka temizlendi — sonraki baskıya hazır`,plateNumber:`Plaka {{index}}`,quantity:`Miktar`,quantityHint:`{{count}} kuyruk öğesi oluşturur`,plateQuantityLabel:`{{plate}} baskı sayısı`,plateQuantityTotal_one:`toplam {{count}} baskı`,plateQuantityTotal_other:`toplam {{count}} baskı`,batchOrders:{title:`Toplu siparişler`,emptyTitle:`Toplu sipariş yok`,emptyDescription:`Çok tablalı bir dosyayı ya da bir tablanın birden fazla kopyasını kuyruğa alın; sipariş ilerlemesiyle birlikte burada görünür.`,filter:{active:`Etkin`,completed:`Tamamlanan`,cancelled:`İptal edilen`,all:`Tümü`},status:{active:`Etkin`,completed:`Tamamlandı`,cancelled:`İptal edildi`},noTargets:`Yalnızca gruplama`,noTargetsHint:`Tabla başına hedef adetler gelmeden önce oluşturuldu; hedef yerine kuyruğa alınan baskıları izler.`,dispatchRemaining:`Kalan {{count}} baskıyı kuyruğa al`,dispatchPlate:`Kalanları kuyruğa al`,strandedPlate:`Ayarların kopyalanacağı çalışma yok`,strandedNotice:`Hâlâ beklenen {{owed}} çalışmadan {{runs}} tanesi kuyruğa alınamıyor: o plaka için ayarların kopyalanabileceği kuyrukta veya tamamlanmış bir çalışma kalmadı. Plakayı dosyadan bir kez kuyruğa alın veya siparişi iptal edin.`,dispatched:`{{name}} için kalan baskılar kuyruğa alındı`,plateProgress:`{{target}} baskıdan {{completed}} tamam`,remaining:`{{count}} baskı bekliyor`,failed:`{{count}} başarısız`,printing:`{{count}} yazdırılıyor`,wholeFile:`Dosyanın tamamı`,due:`Son tarih {{date}}`,costSoFar:`şu ana kadar {{amount}}`,costRemaining:`({{amount}} kaldı)`},activeBatches:`Aktif Yığınlar`,batchProgress:`{{total}} öğeden {{completed}} tanesi tamamlandı`,cancelBatch:`Kalanları İptal Et`,batchCancelled:`Kalan yığın öğeleri iptal edildi`,cancelBatchConfirmTitle:`Yığını İptal Et`,cancelBatchConfirmMessage:`Bu sipariş kapatılsın mı? Kuyrukta kalan çalışmalar iptal edilir ve sipariş üretmediklerini artık istemez.`,batch:{defaultName:`Yığın`,label:`{{count}} öğe`,label_plural:`{{count}} öğe`,pendingCount:`{{count}} bekleyen`,pendingCount_plural:`{{count}} bekleyen`,expand:`Yığını genişlet`,collapse:`Yığını daralt`,groupAsBatch:`Yığın olarak grupla…`,groupAsBatchDescription:`Seçilen {{count}} öğeyi tek bir daraltılabilir yığında birleştirin.`,nameLabel:`Yığın adı`,namePlaceholder:`örn. Cuma hediyeleri`,create:`Yığın oluştur`,ungroup:`Gruptan çıkar`,ungroupConfirmTitle:`Yığını gruptan çıkar?`,ungroupConfirmMessage:`Öğeler kuyrukta kalacak ancak artık birlikte gruplanmayacak.`,dragGroup:`Grubu sürükle`},tabs:{batches:`Gruplar`,queue:`Kuyruk`,history:`Geçmiş`,timeline:`Zaman çizelgesi`,pipelines:`Pipeline'lar`},layout:{flatList:`Liste`,byPrinter:`Yazıcıya göre`,groupByPrinter:`Yazıcıya göre grupla`},history:{emptyTitle:`Henüz geçmiş yok`,emptyDescription:`Tamamlanan, iptal edilen ve başarısız baskılar burada görünür.`,showMore:`Daha fazla göster`,showingCount:`{{total}} öğeden {{shown}} tanesi gösteriliyor`},dragGhost:{multiCount:`{{count}} öğe`,batch:`{{name}} ({{count}} kopya)`,batch_plural:`{{name}} ({{count}} kopya)`},sections:{currentlyPrinting:`Şu Anda Yazdırılan`,queued:`Kuyruktaki`,history:`Geçmiş`},status:{pending:`Beklemede`,waiting:`Bekliyor`,printing:`Yazdırılıyor`,paused:`Duraklatıldı`,completed:`Tamamlandı`,failed:`Başarısız`,skipped:`Atlandı`,cancelled:`İptal edildi`},summary:{printing:`Yazdırılıyor`,queued:`Kuyrukta`,totalTime:`Toplam Kuyruk Süresi`,totalWeight:`Toplam Kuyruk Ağırlığı`,history:`Geçmiş`},filter:{allPrinters:`Tüm Yazıcılar`,unassigned:`Atanmamış`,allStatus:`Tüm Durumlar`,allLocations:`Tüm Konumlar`,any:`Herhangi`},sort:{byPosition:`Konuma Göre Sırala`,byName:`Ada Göre Sırala`,byPrinter:`Yazıcıya Göre Sırala`,bySchedule:`Zamana Göre Sırala`,byDate:`Tarihe Göre Sırala`,ascendingOldest:`Artan (önce en eski)`,descendingNewest:`Azalan (önce en yeni)`},badges:{staged:`Hazırlandı`,requiresPrevious:`Önceki başarı gerekli`,autoPowerOff:`Otomatik kapanma`,gcodeInjection:`G-kod`},empty:{title:`Zamanlanmış baskı yok`,description:`Bağlam menüsündeki "Zamanla" seçeneğini kullanarak Arşivler sayfasından bir baskı zamanlayın veya başlamak için dosyaları sürükleyip bırakın.`},time:{etaIfStartedNow:`Bu iş şimdi başlatılırsa tamamlanma saati`,whenFree:`Bir yazıcı boşaldığında`,overdue:`Gecikmiş`,now:`Şimdi`,lessThanMinute:`Bir dakikadan az`,inMinutes:`{{count}} dk içinde`,inHours:`{{count}} saat içinde`},actions:{startPrint:`Baskıyı Başlat`,stopPrint:`Baskıyı Durdur`,requeue:`Yeniden Kuyrukla`},bulkEdit:{title:`{{count}} Öğeyi Düzenle`,title_plural:`{{count}} Öğeyi Düzenle`,description:`Yalnızca değiştirilen ayarlar seçili öğelere uygulanacak.`,printer:`Yazıcı`,noChange:`— Değişiklik yok —`,queueOptions:`Kuyruk Seçenekleri`,staged:`Hazırlandı (manuel başlatma)`,autoPowerOff:`Baskı sonrası otomatik kapanma`,requirePrevious:`Önceki başarı gerekli`,gcodeInjection:`G-kod enjekte et`,printOptions:`Baskı Seçenekleri`,bedLevelling:`Tabla seviyelendirme`,flowCalibration:`Akış kalibrasyonu`,vibrationCalibration:`Titreşim kalibrasyonu`,layerInspection:`İlk katman denetimi`,timelapse:`Zaman atlamalı video`,useAms:`AMS Kullan`,nozzleOffsetCali:`Nozül ofset kalibrasyonu`,applyChanges:`Değişiklikleri Uygula`,selectAll:`Tümünü Seç`,deselectAll:`Seçimi Kaldır`,selected:`{{count}} seçildi`,editSelected:`Seçilenleri Düzenle`,cancelSelected:`Seçilenleri İptal Et`},confirm:{cancelTitle:`Zamanlanmış Baskıyı İptal Et`,cancelMessage:`"{{name}}" iptal etmek istediğinizden emin misiniz?`,stopTitle:`Baskıyı Durdur`,stopMessage:`"{{name}}" mevcut baskıyı durdurmak istediğinizden emin misiniz? Bu, yazıcıdaki baskı işini iptal edecek.`,removeTitle:`Geçmişten Kaldır`,removeMessage:`"{{name}}" kuyruk geçmişinden kaldırmak istediğinizden emin misiniz?`,clearHistoryTitle:`Geçmişi Temizle`,clearHistoryMessage:`Geçmişten {{count}} öğenin tümünü kaldırmak istediğinizden emin misiniz?`,cancelButton:`Baskıyı İptal Et`,stopButton:`Baskıyı Durdur`,thisPrint:`bu baskı`,thisItem:`bu öğe`},toast:{cancelled:`Kuyruk öğesi iptal edildi`,cancelFailed:`Öğe iptal edilemedi`,removed:`Kuyruk öğesi kaldırıldı`,keptForOrder:`Kaldırılmak yerine iptal edildi: yığın siparişinin bu plakayı yeniden kuyruğa alabileceği tek çalışma bu`,historyKeptForOrders:`Yığın siparişlerinin hâlâ ihtiyaç duyduğu {{kept}} tanesi korundu.`,removeFailed:`Öğe kaldırılamadı`,stopped:`Baskı durduruldu`,stopFailed:`Baskı durdurulamadı`,released:`Baskı kuyruğa bırakıldı`,startFailed:`Baskı başlatılamadı`,reorderFailed:`Kuyruk yeniden sıralanamadı`,historyCleared:`{{count}} geçmiş öğesi temizlendi`,clearHistoryFailed:`Geçmiş temizlenemedi`,updateFailed:`Öğeler güncellenemedi`,bulkCancelled:`{{count}} öğe iptal edildi`,bulkCancelFailed:`Öğeler iptal edilemedi`,batchCreated:`"{{name}}" yığını oluşturuldu`,batchCreateFailed:`Yığın oluşturma başarısız`,batchUngrouped:`{{count}} öğe gruptan çıkarıldı`,batchUngroupFailed:`Yığını gruptan çıkarma başarısız`,resumedAfterFailure:`Kuyruk devam ettirildi — {{restored}} iş bekleyene geri alındı`,resumeAfterFailureFailed:`Kuyruk devam ettirilemedi`},resumeAfterFailure:{banner:`{{printer}} önceki bir baskı hatası nedeniyle engellendi — {{count}} iş atlandı`,bannerHint:`Yazıcı sorununu çözün, ardından atlanan işleri geri yüklemek ve engellemeyi kaldırmak için devam ettirin.`,button:`Hatadan sonra devam et`,confirmTitle:`Hatadan sonra kuyruğa devam edilsin mi?`,confirmMessage:`{{printer}} üzerindeki {{count}} atlanan işi bekleyene geri yükleyin ve önceki baskı engelini kaldırın. Devam etmeden önce yazıcının hazır olduğundan emin olun.`},timeline:{listView:`Liste`,timelineView:`Zaman Çizelgesi`,unassigned:`Atanmamış`,noData:`Bu gün için zamanlanmış baskı yok`,nothingCommitted:`Bu pencerede onaylanmış programlar yok. Hazırlanmış öğeler, beklemedeki öğeler ve boştaki yazıcılardaki ASAP işleri gösterilmez — burada görmek için zamanlanmış bir saat belirleyin veya hazırlanmış bir öğeyi serbest bırakın.`,allDoneBy:`Tüm baskıların {{time}}'e kadar bitmesi tahmin ediliyor`,staged:`Hazırlandı`,filterAll:`Tümünü Göster`,filterPrinting:`Yazdırılıyor`,filterQueued:`Kuyrukta`,time:{anyMoment:`her an`,minutesLeft:`{{minutes}}dk kaldı`,hoursLeft:`{{hours}}sa kaldı`,hoursMinutesLeft:`{{hours}}sa {{minutes}}dk kaldı`},day:{previous:`Önceki gün`,next:`Sonraki gün`,today:`Bugün`},window:{back12h:`12 saat geri`,forward12h:`12 saat ileri`,now:`Şimdi`},printerColumnHeader:`Yazıcı`},permissions:{noStopPrint:`Baskıları durdurma izniniz yok`,noStartPrint:`Baskıları başlatma izniniz yok`,noEdit:`Bu kuyruk öğesini düzenleme izniniz yok`,noCancel:`Bu kuyruk öğesini iptal etme izniniz yok`,noRequeue:`Öğeleri yeniden kuyruklama izniniz yok`,noRemove:`Bu kuyruk öğesini kaldırma izniniz yok`,noClearHistory:`Tüm geçmişi temizleme izniniz yok`,noEditItems:`Kuyruk öğelerini düzenleme izniniz yok`,noCancelItems:`Kuyruk öğelerini iptal etme izniniz yok`}},stats:{title:`İstatistikler`,subtitle:`Yeniden düzenlemek için widget'ları sürükleyin. Gizlemek için göz simgesine tıklayın.`,overview:`Genel Bakış`,totalPrints:`Toplam Baskı`,successRate:`Başarı Oranı`,totalPrintTime:`Toplam Baskı Süresi`,printTime:`Baskı Süresi`,totalFilament:`Toplam Kullanılan Filament`,filamentUsed:`Kullanılan Filament`,filamentCost:`Filament Maliyeti`,totalCost:`Toplam Maliyet`,energyUsed:`Kullanılan Enerji`,energyCost:`Enerji Maliyeti`,energyWarmingUpTooltip:`Enerji takibi hâlâ saatlik anlık görüntüler topluyor. Tarih aralığı toplamları, seçilen aralıktan önce en az bir anlık görüntü olduğunda doğru hâle gelir. Erken değerler eksik sayabilir.`,averagePrintTime:`Ortalama Baskı Süresi`,printsPerDay:`Günlük Baskı`,byPrinter:`Yazıcıya Göre`,printsByPrinter:`Yazıcıya Göre Baskılar`,byMaterial:`Malzemeye Göre`,byMonth:`Aya Göre`,last7Days:`Son 7 Gün`,last30Days:`Son 30 Gün`,last90Days:`Son 90 Gün`,allTime:`Tüm Zamanlar`,quickStats:`Hızlı İstatistikler`,printActivity:`Baskı Etkinliği`,filamentTypes:`Filament Türleri`,filamentTrends:`Filament Trendleri`,failureAnalysis:`Başarısızlık Analizi`,timeAccuracy:`Süre Doğruluğu`,successful:`Başarılı:`,failed:`Başarısız:`,cancelled:`İptal edildi:`,perfectEstimate:`%100 = mükemmel tahmin`,noTimeAccuracyData:`Henüz süre doğruluğu verisi yok`,noFilamentData:`Filament verisi mevcut değil`,noPrinterData:`Yazıcı verisi mevcut değil`,noPrintData:`Baskı verisi mevcut değil`,noPrintDataLast30Days:`Son 30 günde baskı verisi yok`,failureReasons:`Başarısızlık Nedenleri`,topFailureReasons:`En Sık Başarısızlık Nedenleri`,failedPrintsCount:`{{total}} baskının {{failed}} tanesi başarısız`,lastWeekRate:`Geçen hafta: %{{rate}}`,resetLayout:`Düzeni Sıfırla`,recalculateCosts:`Maliyetleri Yeniden Hesapla`,recalculateCostsHint:`Mevcut filament fiyatlarını kullanarak tüm arşiv maliyetlerini yeniden hesapla`,exportStats:`İstatistikleri Dışa Aktar`,exportAsCsv:`CSV Olarak Dışa Aktar`,exportAsExcel:`Excel Olarak Dışa Aktar`,hiddenCount:`{{count}} Gizli`,exportDownloaded:`Dışa aktarma indirildi`,exportFailed:`Dışa aktarma başarısız`,layoutReset:`Düzen sıfırlandı`,recalculatedCosts:`{{count}} arşiv için maliyetler yeniden hesaplandı`,recalculateFailed:`Maliyetler yeniden hesaplanamadı`,loadingStats:`İstatistikler yükleniyor...`,noPermissionResetLayout:`Düzeni sıfırlama izniniz yok`,noPermissionRecalculate:`Maliyetleri yeniden hesaplama izniniz yok`,noPrintDataInRange:`Seçili aralıkta baskı verisi yok`,periodFilament:`Dönem Filamenti`,periodCost:`Dönem Maliyeti`,avgPerPrint:`Baskı Başına Ort.`,usageOverTime:`Zaman İçinde Kullanım`,energyOverTime:`Zaman İçinde Enerji`,filamentByWeight:`Ağırlık`,printDuration:`Baskı Süresi`,printerUtilization:`Yazıcı Kullanımı`,filamentSuccess:`Malzemeye Göre Başarı`,printHabits:`Baskı Alışkanlıkları`,printTimeOfDay:`Günün Baskı Saati`,colorDistribution:`Renk Dağılımı`,noColorData:`Renk verisi mevcut değil`,records:`Kayıtlar`,longestPrint:`En Uzun Baskı`,heaviestPrint:`En Ağır Baskı`,mostExpensivePrint:`En Pahalı`,busiestDay:`En Yoğun Gün`,successStreak:`Başarı Serisi`,streakPrint:`ardışık baskı`,streakPrints:`{{count}} ardışık baskı`,printerStats:`Yazıcı İstatistikleri`,hours:`saat`,avgPrints:`Ort. baskı`,noArchiveData:`Baskı verisi mevcut değil`,filamentByTime:`Süre`,avgWeight:`Ort. ağırlık`,avgTime:`Ort. süre`,filamentByPrints:`Baskılar`,timeframe:{today:`Bugün`,"this-week":`Bu Hafta`,"this-month":`Bu Ay`,"last-7":`Son 7 Gün`,"last-30":`Son 30 Gün`,"last-90":`Son 90 Gün`,"this-year":`Bu Yıl`,"all-time":`Tüm Zamanlar`,custom:`Özel Aralık`,from:`Başlangıç`,to:`Bitiş`},allUsers:`Tüm Kullanıcılar`,noUser:`Kullanıcı Yok (Sistem)`,filterByUser:`Kullanıcıya Göre Filtrele`},maintenance:{title:`Bakım`,overview:`Genel Bakış`,allOk:`Tüm bakım güncel`,dueCount:`{{count}} öğe bekliyor`,dueCount_plural:`{{count}} öğe bekliyor`,warningCount:`{{count}} uyarı`,warningCount_plural:`{{count}} uyarı`,totalPrintTime:`Toplam Baskı Süresi`,nextMaintenance:`Sonraki Bakım`,nothingDue:`Bekleyen yok`,tasks:`Görevler`,lastPerformed:`Son yapılan`,interval:`Aralık`,hoursRemaining:`{{hours}}sa kaldı`,hoursOverdue:`{{hours}}sa gecikmiş`,markDone:`Tamamlandı Olarak İşaretle`,performMaintenance:`Bakım Gerçekleştir`,history:`Geçmiş`,noHistory:`Bakım geçmişi yok`,editPrintHours:`Baskı Saatlerini Düzenle`,currentHours:`Mevcut Saat`,statusTab:`Durum`,settingsTab:`Ayarlar`,overdueCount:`{{count}} gecikmiş`,dueSoonCount:`{{count}} yakında`,dueSoon:`Yakında`,allGood:`Her şey iyi`,overdueBy:`{{duration}} gecikmiş`,dueIn:`{{duration}} içinde`,timeLeft:`{{duration}} kaldı`,day:`1 gün`,days:`{{count}} gün`,week:`1 hafta`,weeks:`{{count}} hafta`,month:`1 ay`,months:`{{count}} ay`,year:`1 yıl`,maintenanceTypes:`Bakım Türleri`,maintenanceTypesDescription:`Sistem türleri ve özel bakım görevleriniz`,addCustomType:`Özel Tür Ekle`,restoreDefaults:`Varsayılan Görevleri Geri Yükle`,intervalType:`Aralık Türü`,intervalValue:`Aralık ({{type}})`,icon:`Simge`,documentationLink:`Dokümantasyon Bağlantısı (isteğe bağlı)`,assignToPrinters:`Yazıcılara Ata`,selectAtLeastOnePrinter:`En az bir yazıcı seçin`,addType:`Tür Ekle`,custom:`Özel`,printHours:`Baskı Saatleri`,calendarDays:`Takvim Günleri`,exampleName:`örn., HEPA Filtresini Değiştir`,viewDocumentation:`Dokümantasyonu görüntüle`,timeBasedInterval:`Zaman tabanlı aralık`,intervalOverrides:`Aralık Geçersiz Kılmaları`,intervalOverridesDescription:`Belirli yazıcılar için aralıkları özelleştir`,assignedToPrinters:`Atanan yazıcılar:`,noPrintersAssigned:`Atanan yazıcı yok`,addPrinterShort:`Ekle:`,printersAssignedClick:`{{count}} yazıcı atandı - yönetmek için tıklayın`,removeFromPrinter:`Bu yazıcıdan kaldır`,types:{lubricateCarbonRods:`Karbon Çubukları Yağla`,lubricateRails:`Lineer Rayları Yağla`,cleanNozzle:`Nozulu/Hotend Temizle`,checkBelts:`Kayış Gerginliğini Kontrol Et`,cleanBuildPlate:`Baskı Plakasını Temizle`,checkExtruder:`Ekstrüder Dişlilerini Kontrol Et`,checkCooling:`Soğutma Fanlarını Kontrol Et`,generalInspection:`Genel Denetim`,cleanCarbonRods:`Karbon Çubukları Temizle`,lubricateSteelRods:`Çelik Çubukları Yağla`,cleanSteelRods:`Çelik Çubukları Temizle`,cleanLinearRails:`Lineer Rayları Temizle`,checkPtfeTube:`PTFE Tüpünü Kontrol Et`,replaceHepaFilter:`HEPA Filtresini Değiştir`,replaceCarbonFilter:`Karbon Filtresini Değiştir`,lubricateLeftNozzleRail:`Sol Nozul Rayını Yağla`},maintenanceComplete:`Bakım tamamlandı olarak işaretlendi`,typeUpdated:`Bakım türü güncellendi`,typeDeleted:`Bakım türü silindi`,defaultsRestored:`{{count}} varsayılan görev geri yüklendi`,printHoursUpdated:`Baskı saatleri güncellendi`,printerAssigned:`Yazıcı atandı`,printerRemoved:`Yazıcı kaldırıldı`,deleteTypeConfirm:`"{{name}}" silinsin mi?`,deleteSystemTypeTitle:`Varsayılan bakım görevi silinsin mi?`,deleteSystemTypeMessage:`"{{name}}" varsayılan bakım görevini silmek istediğinizden emin misiniz?`,noPermissionUpdate:`Bakım öğelerini güncelleme izniniz yok`,noPermissionPerform:`Bakım gerçekleştirme izniniz yok`,noPermissionEditTypes:`Bakım türlerini düzenleme izniniz yok`,noPermissionDeleteTypes:`Bakım türlerini silme izniniz yok`,noPermissionEditHours:`Baskı saatlerini düzenleme izniniz yok`,noPermissionRemovePrinter:`Yazıcı atamalarını kaldırma izniniz yok`,noPermissionAssignPrinter:`Yazıcı atama izniniz yok`,noPermissionEditIntervals:`Aralıkları düzenleme izniniz yok`,configureSettings:`Bakım türlerini ve aralıklarını yapılandır`},settings:{sliceEngine:`Dilimleme motoru`,sliceEngineSidecar:`Sunucu sidecar`,sliceEngineSidecarHint:`Dilimleme sunucuda, dilimleyici sidecar konteynerinde çalışır.`,sliceEngineBrowser:`Tarayıcıda`,sliceEngineBrowserHint:`Dilimleme sunucu olmadan bu cihazda çalışır.`,title:`Ayarlar`,general:`Genel`,tabs:{general:`Genel`,smartPlugs:`Akıllı Prizler`,sensors:`Sensörler`,notifications:`Bildirimler`,queue:`İş Akışı`,queueDispatch:`Kuyruk ve Sevkıyat`,queuePipelines:`Pipeline'lar`,filament:`Filament`,network:`Ağ`,apiKeys:`API Anahtarları`,virtualPrinter:`Sanal Yazıcı`,spoolbuddy:`SpoolBuddy`,failureDetection:`Başarısızlık Algılama`,users:`Kimlik Doğrulama`,backup:`Yedekleme`,emailAuth:`E-posta Kimlik Doğrulama`,ldap:`LDAP`,twoFa:`İki Faktörlü Kimlik Doğrulama`,oidc:`SSO / OIDC`,security:`Güvenlik`},spoolbuddy:{infoTitle:`SpoolBuddy cihazları`,infoBody:`SpoolBuddy kioskları heartbeat üzerinden otomatik olarak kayıt olur. Artık kullanılmıyorsa veya bir daemon çökmesi nedeniyle eski bir kopya kaldıysa bir cihazı buradan kayıttan çıkarın.`,duplicatesTitle:`{{count}} cihaz kayıtlı`,duplicatesBody:`Yalnızca ilk kayıtlı cihaz kiosk arayüzü tarafından kullanılır. Bunlardan biri çökme sonucu kalmış eski bir kopya ise kayıttan çıkarın — çevrimiçi bir cihaz sonraki heartbeat'inde kendini yeniden kaydedecek.`,empty:`Henüz kayıtlı SpoolBuddy cihazı yok.`,online:`Çevrimiçi`,offline:`Çevrimdışı`,unregister:`Kayıttan Çıkar`,unregisterSuccess:`Cihaz kayıttan çıkarıldı`,unregisterError:`Cihaz kayıttan çıkarılamadı`,confirmTitle:`SpoolBuddy cihazı kayıttan çıkarılsın mı?`,confirmBody:`Bu, "{{hostname}}" ({{deviceId}}) cihazını veritabanından kaldıracak. Cihaz çevrimiçiyse, sonraki heartbeat'inde kendini yeniden kaydedecek.`,ipAddress:`IP adresi`,firmware:`Firmware`,lastSeen:`Son görülme`,daemonUptime:`Daemon çalışma süresi`,systemUptime:`Sistem çalışma süresi`,never:`asla`,nfc:`NFC`,scale:`Tartı`,cpuTemp:`CPU sıcaklığı`,cpuLoad:`CPU yükü`,memory:`Bellek`,disk:`Disk`,update:`Güncelle`,updateConfirmTitle:`Spoolbuddy daemon güncellensin mi?`,updateConfirmBody:`"{{hostname}}" cihazında yazılım güncellemesi tetiklensin mi? Güncelleme uygulandığında daemon yeniden başlayacak.`,restartBrowser:`Tarayıcıyı Yeniden Başlat`,restartBrowserConfirmTitle:`Kiosk tarayıcısı yeniden başlatılsın mı?`,restartBrowserConfirmBody:`"{{hostname}}" cihazındaki kiosk tarayıcısı yeniden başlatılsın mı? Ekran kısa bir süre kararacak.`,restartDaemon:`Daemon'u Yeniden Başlat`,restartDaemonConfirmTitle:`Spoolbuddy daemon yeniden başlatılsın mı?`,restartDaemonConfirmBody:`"{{hostname}}" üzerindeki Spoolbuddy daemon yeniden başlatılsın mı? Cihaz birkaç saniye çevrimdışı olacak.`,reboot:`Yeniden Başlat`,rebootConfirmTitle:`Cihaz yeniden başlatılsın mı?`,rebootConfirmBody:`"{{hostname}}" yeniden başlatılsın mı? Cihaz yaklaşık bir dakika çevrimdışı olacak.`,shutdown:`Kapat`,shutdownConfirmTitle:`Cihaz kapatılsın mı?`,shutdownConfirmBody:`"{{hostname}}" kapatılsın mı? Tekrar açmak için fiziksel erişime ihtiyacınız olacak.`,commandConfirm:`Onayla`,commandQueued:`Komut kuyruğa alındı`,commandError:`Komut gönderilemedi`},ldap:{title:`LDAP Kimlik Doğrulama`,enabledDesc:`LDAP kimlik doğrulama etkin`,disabledDesc:`LDAP kimlik doğrulama devre dışı`,disabledHint:`Aşağıdaki LDAP ayarlarını yapılandırın ve kaydedin, ardından etkinleştirin.`,enabled:`LDAP kimlik doğrulama etkinleştirildi`,disabled:`LDAP kimlik doğrulama devre dışı bırakıldı`,feature1:`Kullanıcılar LDAP kimlik bilgileriyle giriş yapabilir`,feature2:`Yerel yönetici hesabı yedek olarak kalır`,feature3:`LDAP grupları giriş sırasında BamBuddy gruplarına eşlenir`,serverConfig:`LDAP Sunucu Yapılandırması`,serverUrl:`Sunucu URL`,serverUrlHint:`SSL için ldaps:// veya StartTLS ile ldap:// kullanın`,security:`Güvenlik`,securityHint:`StartTLS düz bir bağlantıyı TLS'ye yükseltir. LDAPS başlangıçtan itibaren TLS kullanır.`,bindDn:`Bind DN (Servis Hesabı)`,bindPassword:`Bind Parolası`,searchBase:`Arama Tabanı DN`,userFilter:`Kullanıcı Arama Filtresi`,userFilterHint:`{username} giriş kullanıcı adıyla değiştirilir. OpenLDAP için (uid={username}) kullanın.`,advanced:`Gelişmiş`,autoProvision:`Kullanıcıları otomatik tedarik et`,autoProvisionHint:`İlk LDAP girişinde otomatik olarak BamBuddy hesabı oluştur`,defaultGroup:`Varsayılan grup`,defaultGroupNone:`— Hiçbiri (yedek yok) —`,defaultGroupHint:`Bir LDAP kullanıcısı kimlik doğruladığında ancak eşlenmiş herhangi bir LDAP grubunda listelenmediğinde atanan yedek grup. Eşlenmemiş kullanıcıları izinsiz bırakmak için boş bırakın.`,groupMapping:`Grup Eşleme (JSON)`,groupMappingHint:`LDAP grup DN'lerini BamBuddy gruplarına eşle. Kullanılabilir gruplar: `,testConnection:`Bağlantıyı Test Et`,settingsSaved:`LDAP ayarları kaydedildi`,errors:{serverRequired:`LDAP sunucu URL gerekli`,searchBaseRequired:`Arama tabanı DN gerekli`,enableAuthFirst:`Önce kimlik doğrulamayı etkinleştirin`,configureLdapFirst:`Önce LDAP ayarlarını kaydedin`}},email:{smtpSettings:`SMTP Yapılandırması`,smtpHost:`SMTP Sunucusu`,smtpPort:`SMTP Portu`,security:`Güvenlik`,authentication:`Kimlik Doğrulama`,username:`Kullanıcı Adı`,password:`Parola`,fromEmail:`Gönderen E-posta`,fromName:`Gönderen Adı`,testConnection:`SMTP Bağlantısını Test Et`,testRecipient:`Test Alıcı E-postası`,sendTest:`Test E-postası Gönder`,sending:`Gönderiliyor...`,save:`Ayarları Kaydet`,saving:`Kaydediliyor...`,advancedAuth:`Gelişmiş Kimlik Doğrulama`,advancedAuthEnabled:`Gelişmiş Kimlik Doğrulama etkin`,advancedAuthEnabledDesc:`E-posta tabanlı kullanıcı yönetimi özellikleri aktif. Yeni kullanıcılar e-posta ile otomatik oluşturulan parolalar alacak ve kullanıcılar parola sıfırlama özelliğiyle parolalarını sıfırlayabilecek.`,advancedAuthDisabled:`Gelişmiş Kimlik Doğrulama devre dışı`,advancedAuthDisabledDesc:`Kullanıcı yönetimi için e-posta tabanlı özellikleri etkinleştirmek için gelişmiş kimlik doğrulamayı etkinleştirin.`,enable:`Etkinleştir`,disable:`Devre dışı bırak`,feature1:`Parolalar otomatik oluşturulur ve yeni kullanıcılara e-posta ile gönderilir`,feature2:`Kullanıcılar kullanıcı adı veya e-posta ile giriş yapabilir`,feature3:`Parola unuttum özelliği kullanılabilir`,feature4:`Yöneticiler kullanıcı parolalarını e-posta ile sıfırlayabilir`,errors:{requiredFields:`Lütfen tüm zorunlu alanları doldurun`,usernameRequired:`Kimlik doğrulama etkinken kullanıcı adı zorunludur`,enterTestEmail:`Lütfen test e-posta adresi girin`,smtpServerAndEmail:`Test etmeden önce lütfen SMTP Sunucusu ve Gönderen E-posta alanlarını doldurun`,usernamePasswordRequired:`Kimlik doğrulama etkinken Kullanıcı Adı ve Parola zorunludur`,configureSmtpFirst:`Lütfen önce SMTP ayarlarını yapılandırın ve test edin`,enableAuthFirst:`E-posta tabanlı özellikleri kullanmak için lütfen önce kimlik doğrulamayı etkinleştirin.`},success:{settingsSaved:`SMTP ayarları başarıyla kaydedildi`},securityOptions:{starttls:`STARTTLS (Port 587)`,ssl:`SSL/TLS (Port 465)`,none:`Hiçbiri (Port 25)`},authOptions:{enabled:`Etkin`,disabled:`Devre dışı`}},appearance:`Görünüm`,notifications:`Bildirimler`,smartPlugs:`Akıllı Prizler`,spoolman:`Spoolman`,updates:`Güncellemeler`,language:`Dil`,languageDescription:`Tercih ettiğiniz dili seçin`,theme:`Tema`,themeLight:`Açık`,themeDark:`Koyu`,themeSystem:`Sistem`,defaultView:`Varsayılan Görünüm`,defaultViewDescription:`Uygulamayı açarken gösterilecek sayfa`,checkForUpdates:`Güncellemeleri Kontrol Et`,autoUpdate:`Otomatik Güncelleme`,currentVersion:`Mevcut Sürüm`,latestVersion:`En Son Sürüm`,upToDate:`Güncelsiniz`,updateAvailable:`Güncelleme mevcut`,notificationLanguage:`Bildirim Dili`,notificationLanguageDescription:`Push bildirimleri için dil`,bedCooledThreshold:`Tabla Soğuma Eşiği`,bedCooledThresholdDescription:`Bir baskıdan sonra tablanın soğumuş kabul edildiği sıcaklık`,userNotificationsEnabled:`Kullanıcı Bildirimleri`,userNotificationsEnabledDescription:`Baskı işi olayları için kullanıcı bildirim menüsünü ve e-posta bildirimlerini etkinleştir. Gelişmiş Kimlik Doğrulama gerektirir.`,userNotificationsDisabledHint:`Kullanıcı bildirimlerini kullanmak için Gelişmiş Kimlik Doğrulamayı etkinleştirin.`,notificationProviders:`Bildirim Sağlayıcıları`,addProvider:`Sağlayıcı Ekle`,editProvider:`Sağlayıcıyı Düzenle`,providerType:`Sağlayıcı Türü`,testNotification:`Test Bildirimi`,testSuccess:`Test bildirimi başarıyla gönderildi`,testFailed:`Test bildirimi gönderilemedi`,quietHours:`Sessiz Saatler`,quietHoursDescription:`Bu saatler arasında rahatsız etme`,quietHoursStart:`Başlangıç`,quietHoursEnd:`Bitiş`,events:{title:`Bildirim Olayları`,printStart:`Baskı Başladı`,printComplete:`Baskı Tamamlandı`,printFailed:`Baskı Başarısız`,printStopped:`Baskı Durduruldu`,printProgress:`İlerleme Kilometre Taşları`,printProgressDescription:`%25, %50, %75'te bildir`,printerOffline:`Yazıcı Çevrimdışı`,printerError:`Yazıcı Hatası`,filamentLow:`Az Filament`,maintenanceDue:`Bakım Zamanı`,maintenanceDueDescription:`Bakım gerektiğinde bildir`},smartPlug:{title:`Akıllı Prizler`,add:`Akıllı Priz Ekle`,edit:`Akıllı Prizi Düzenle`,name:`Ad`,ipAddress:`IP Adresi`,linkedPrinter:`Bağlı Yazıcı`,autoOn:`Otomatik Aç`,autoOnDescription:`Baskı başladığında aç`,autoOff:`Otomatik Kapat`,autoOffDescription:`Baskı tamamlandıktan sonra kapat`,offDelay:`Kapatma Gecikmesi`,offDelayMinutes:`Baskıdan sonra dakika`,offDelayTemp:`Nozul sıcaklığın altında olduğunda`,currentState:`Mevcut Durum`,turnOn:`Aç`,turnOff:`Kapat`},filamentTracking:`Filament Takibi`,filamentTrackingDesc:`Filament makaralarınızı nasıl takip edeceğinizi seçin. Yerleşik envanteri kullanabilir veya harici bir Spoolman sunucusuna bağlanabilirsiniz.`,autoAddUnknownRfid:`Bilinmeyen RFID makaralarını otomatik ekle`,autoAddUnknownRfidDesc:`Bilinmeyen RFID etiketli bir makara algılandığında otomatik olarak envantere bir kayıt oluşturur. Çoğaltmaları önlemek için yeni makaraları manuel olarak önceden kaydediyorsanız kapatın.`,filamentChecks:`Filament kontrolleri`,disableFilamentWarnings:`Filament uyarılarını devre dışı bırak`,disableFilamentWarningsDesc:`Yazdırırken veya kuyruğa eklerken yetersiz filamentle ilgili uyarıları gösterme`,preferLowestFilament:`En az kalan filamenti tercih et`,preferLowestFilamentDesc:`Birden fazla makara eşleştiğinde, kalan filamenti en az olanı kullan`,preferLowestFilamentBackupNote:`Yalnızca yazıcıda AMS Filament Backup etkinleştirildiğinde uygulanır — aksi takdirde seçilen makara bittiğinde yazıcı ikinci bir makaraya geçemez.`,trackingModeBuiltIn:`Yerleşik Envanter`,trackingModeBuiltInDesc:`RFID otomatik eşleştirme ve kullanım takibi dahil`,trackingModeSpoolmanDesc:`Harici filament yönetim sunucusu`,builtInFeatureRfid:`AMS'deki Bambu Lab RFID makaralarını otomatik olarak algılar`,builtInFeatureUsage:`Baskı başına filament tüketimini takip eder`,builtInFeatureCatalog:`Makaraları, renkleri ve K faktör profillerini yönetin`,builtInFeatureThirdParty:`Üçüncü taraf makaralar envanter makaralarına atanabilir`,amsSyncButton:`AMS'den Ağırlıkları Senkronize Et`,amsSyncTitle:`AMS'den Makara Ağırlıklarını Senkronize Et`,amsSyncMessage:`Bu, bağlı yazıcılardan gelen mevcut AMS kalan% değerleriyle tüm envanter makara ağırlıklarının üzerine yazar. Bozuk ağırlık verilerinden kurtarmak için bunu kullanın. Yazıcılar çevrimiçi olmalıdır.`,amsSyncing:`Senkronize ediliyor...`,amsSyncSuccess:`{{synced}} makara senkronize edildi, {{skipped}} atlandı`,amsSyncError:`AMS'den ağırlıklar senkronize edilemedi`,spoolmanAmsSyncButton:`AMS'den Spoolman Ağırlıklarını Senkronize Et`,spoolmanAmsSyncTitle:`AMS'den Spoolman Makara Ağırlıklarını Senkronize Et`,spoolmanAmsSyncMessage:`Bu, bağlı yazıcılardan gelen mevcut AMS kalan% değerlerine göre tüm Spoolman makara ağırlıklarını güncelleyecek. Yazıcılar çevrimiçi olmalıdır.`,spoolmanAmsSyncing:`Senkronize ediliyor...`,spoolmanAmsSyncSuccess:`{{synced}} makara senkronize edildi, {{skipped}} atlandı`,spoolmanAmsSyncError:`Spoolman ağırlıkları AMS'den senkronize edilemedi`,spoolmanAmsSyncErrorUnreachable:`Spoolman ağırlıkları senkronize edilemedi (Spoolman erişilemez)`,spoolmanAmsSyncErrorNotConfigured:`Spoolman ağırlıkları senkronize edilemedi (Spoolman yapılandırılmamış)`,spoolmanNotConfigured:`Spoolman yapılandırılmamış`,spoolmanFilamentCatalogTitle:`Spoolman Filament Kataloğu`,spoolmanFilamentCatalogDesc:`Spoolman örneğinizden filament adları ve boş ağırlıkları. Ad ve makara ağırlığı burada düzenlenebilir; diğer tüm özellikler doğrudan Spoolman'da yönetilir.`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`Spoolman sunucunuzun URL'si (örn., http://localhost:7912)`,spoolmanConnected:`Bağlı`,spoolmanDisconnected:`Bağlı değil`,status:`Durum`,connect:`Bağlan`,disconnect:`Bağlantıyı Kes`,howSyncWorks:`Senkronizasyon Nasıl Çalışır`,syncInfoRfidOnly:`Yalnızca RFID'li resmi Bambu Lab makaraları senkronize edilir`,syncInfoAutoCreate:`Yeni makaralar ilk senkronizasyonda Spoolman'da otomatik olarak oluşturulur`,syncInfoThirdPartySkipped:`Bambu Lab dışı makaralar (üçüncü taraf, yeniden doldurulmuş) atlanır`,linkingExistingSpools:`Mevcut Makaraları Bağlama`,linkingExistingSpoolsDesc:`Mevcut Spoolman makaralarını AMS'inize bağlamak için, bir AMS yuvasının üzerine gelin ve "Spoolman'a Bağla"ya tıklayın.`,syncMode:`Senkronizasyon Modu`,syncModeAuto:`Otomatik`,syncModeManual:`Yalnızca Manuel`,syncModeAutoDesc:`Değişiklikler algılandığında AMS verisi otomatik olarak senkronize edilir`,syncModeManualDesc:`Yalnızca manuel olarak tetiklendiğinde senkronize et`,syncAmsData:`AMS Verisini Senkronize Et`,syncAmsDataDesc:`Yazıcı AMS verisini manuel olarak Spoolman'a senkronize et`,allPrinters:`Tüm Yazıcılar`,noDefaultPrinter:`Varsayılan yok (her seferinde sor)`,sidebarOrder:`Kenar çubuğu sırası`,saveThumbnails:`Küçük resimleri kaydet`,captureFinishPhoto:`Bitiş fotoğrafı çek`,noPrintersConfigured:`Yapılandırılmış yazıcı yok`,archiveMode:{always:`Her zaman arşiv girişi oluştur`,never:`Asla arşiv girişi oluşturma`,ask:`Her seferinde sor`},checkForUpdatesLabel:`Güncellemeleri kontrol et`,checkPrinterFirmware:`Yazıcı firmware'ini kontrol et`,includeBetaUpdates:`Beta sürümleri dahil et`,includeBetaUpdatesDesc:`Güncellemeleri kontrol ederken beta ve önyayım sürümleri hakkında bildir`,localLogin:{disable:`Yerel kullanıcı adı/şifre ile oturum açmayı devre dışı bırak`,disableHint:`Etkinleştirildiğinde yalnızca SSO sağlayıcıları ile oturum açılabilir. LDAP etkilenmez. Bir kurtarma yolu açık tutmak için sunucuda BAMBUDDY_LOCAL_LOGIN=true ayarlayın.`},enableRetry:`Yeniden denemeyi etkinleştir`,homeAssistantDescription:`Akıllı prizleri Home Assistant üzerinden kontrol et`,environmentManagedLabel:`(Ortam Yönetiliyor)`,autoEnabledViaEnv:`Ortam değişkenleriyle otomatik etkinleştirildi`,urlFromEnvReadOnly:`Değer HA_URL ortam değişkeniyle ayarlandı (salt okunur)`,tokenFromEnvReadOnly:`Değer HA_TOKEN ortam değişkeniyle ayarlandı (salt okunur)`,mqttConnectedTo:`Bağlı`,prometheusDescription:`Yazıcı verisini Prometheus formatında sun`,noSmartPlugsTitle:`Yapılandırılmış akıllı priz yok`,noSmartPlugsDescription:`Enerji kullanımını takip etmek ve güç kontrolünü otomatikleştirmek için Tasmota tabanlı bir akıllı priz ekleyin.`,noProvidersTitle:`Yapılandırılmış sağlayıcı yok`,noProvidersDescription:`Uyarı almak için bir sağlayıcı ekleyin.`,noTemplatesAvailable:`Şablon mevcut değil. Varsayılan şablonları yüklemek için arka ucu yeniden başlatın.`,apiPermissionView:`Yazıcı durumunu ve kuyruğu görüntüle`,apiPermissionEdit:`Baskı kuyruğundan öğe ekle ve kaldır`,apiKeysEmptyTitle:`API anahtarı yok`,apiKeysEmptyDescription:`Harici servislerle entegre olmak için bir API anahtarı oluşturun.`,noUsersFound:`Kullanıcı bulunamadı`,noGroupsFound:`Grup bulunamadı`,noGroupsAvailable:`Kullanılabilir grup yok`,passwordsDoNotMatch:`Parolalar eşleşmiyor`,systemGroupWarning:`Sistem grubu adları değiştirilemez`,authDisabledTitle:`Kimlik Doğrulama Devre Dışı`,authDisabledFeature1:`Sisteme erişmek için giriş gerektir`,authDisabledFeature2:`Grup tabanlı izinlerle birden fazla kullanıcı oluştur`,authDisabledFeature3:`50'den fazla ayrıntılı izinle erişimi kontrol et`,userHasCreated:`Bu kullanıcı şunları oluşturdu:`,userItemsQuestion:`Bu öğelerle ne yapmak istersiniz?`,deleteUserConfirm:`Bu kullanıcıyı silmek istediğinizden emin misiniz?`,actionCannotBeUndone:`Bu işlem geri alınamaz.`,addFirstSmartPlug:`İlk Akıllı Prizinizi Ekleyin`,providers:`Sağlayıcılar`,log:`Günlük`,testAll:`Hepsini Test Et`,testResults:`Test Sonuçları`,testPassedCount:`{{count}} başarılı`,testFailedCount:`{{count}} başarısız`,messageTemplates:`Mesaj Şablonları`,messageTemplatesDescription:`Her olay için bildirim mesajlarını özelleştirin.`,apiKeys:`API Anahtarları`,apiKeysDescription:`Harici entegrasyonlar ve webhook'lar için API anahtarları oluşturun.`,createKey:`Anahtar Oluştur`,apiKeyCreated:`API Anahtarı Başarıyla Oluşturuldu`,apiKeyCopyWarning:`Bu anahtarı şimdi kopyalayın - bir daha gösterilmeyecek!`,useInApiBrowser:`API Tarayıcısında Kullan`,apiKeyQrButton:`QR kodu`,apiKeyQrTitle:`Yapılandırmak için tarayın`,apiKeyQrCaption:`Bu sunucuyu ve API anahtarını eklemek için mobil uygulamanızla tarayın.`,apiKeyQrWarning:`Gizli API anahtarınızı içerir — başkalarının görebileceği yerlerde paylaşmayın veya ekran görüntüsü almayın.`,createNewApiKey:`Yeni API Anahtarı Oluştur`,keyName:`Anahtar Adı`,keyNamePlaceholder:`örn., Home Assistant, OctoPrint`,readStatus:`Durumu Oku`,readStatusDescription:`Yazıcı durumunu, kuyruğu, kütüphaneyi, arşivleri ve dilimleyici pipeline'larını görüntüle`,manageQueue:`Kuyruğu Yönet`,manageQueueDescription:`Baskı kuyruğundan öğe ekle ve kaldır. "Kütüphaneyi Yönet" ile birlikte dilimleyici pipeline'ları çalıştır`,controlPrinter:`Yazıcıyı Kontrol Et`,controlPrinterDescription:`Baskıları duraklat, devam ettir ve durdur`,manageLibrary:`Kütüphaneyi Yönet`,manageLibraryDescription:`Kütüphane dosyalarını yükle, yeniden adlandır, sil ve dilimle; MakerWorld'den model içe aktar. 'Kuyruğu Yönet' ile birlikte dilimleyici pipeline'ları çalıştır`,manageInventory:`Envanteri Yönet`,manageInventoryDescription:`Makaraları ve envanter kayıtlarını oluştur, güncelle ve sil. SpoolBuddy kiosklar (NFC tarama, tartı okumaları, kiosk sistem komutları) için gereklidir.`,manageMaintenance:`Bakımı yönet`,manageMaintenanceDescription:`Tamamlanan bakımları kaydet, sayaçları sıfırla, aralıkları düzenle ve bakım türü kataloğunu yönet. Daha geniş yazıcı kontrolü vermeden "nozulu temizledim"i kaydeden Home Assistant otomasyonlarına uygundur.`,manageArchives:`Arşivleri yönet`,manageArchivesDescription:`Eski baskıların ve istatistik katkılarının kaldırılması dahil olmak üzere baskı arşivlerini düzenleyin ve silin. Baskı geçmişini budayan otomasyonlar için uygundur.`,manageProjects:`Projeleri yönet`,manageProjectsDescription:`Projeleri oluşturun, güncelleyin ve silin, ayrıca bunlara arşiv ekleyin. Baskıları projeler halinde düzenleyen otomasyonlar için uygundur.`,maintenanceBadge:`Bakım`,archivesBadge:`Arşivler`,projectsBadge:`Projeler`,libraryBadge:`Kütüphane`,inventoryBadge:`Envanter`,cloudAccess:`Bulut erişimine izin ver`,cloudAccessDescription:`Adınıza Bambu Bulut ön ayarlarını ve filamentleri okuyun. Bambu Bulut'a giriş yapmış olmanız gerekir.`,cloudBadge:`Bulut`,updateEnergyCost:`Elektrik fiyatını güncelle`,updateEnergyCostDescription:`Bu anahtarın /settings/electricity-price üzerine yeni bir kWh başına elektrik fiyatı POST etmesine izin ver. Home Assistant dinamik tarife otomasyonları (Tibber, Octopus, vb.) için kullanışlıdır. Bu, API anahtarıyla yazılabilen tek ayar alanıdır.`,energyCostBadge:`Enerji`,legacyKey:`Eski`,legacyKeyTooltip:`Kullanıcı başına sahiplikten önce oluşturuldu; bulut erişimini kullanmak için yeniden oluşturun`,unnamedKey:`Adsız Anahtar`,lastUsed:`Son kullanım`,read:`Oku`,control:`Kontrol`,createFirstKey:`İlk Anahtarınızı Oluşturun`,webhookEndpoints:`Webhook Uç Noktaları`,webhookApiKeyHint:`API anahtarınızı X-API-Key başlığında kullanın.`,webhook:{getAllStatus:`Tüm yazıcı durumlarını al`,getSpecificStatus:`Belirli yazıcı durumunu al`,addToQueue:`Baskı kuyruğuna ekle`,pausePrint:`Baskıyı duraklat`,resumePrint:`Baskıya devam et`,stopPrint:`Baskıyı durdur`},apiBrowser:`API Tarayıcısı`,apiBrowserDescription:`Mevcut tüm API uç noktalarını keşfedin ve test edin.`,apiKeyForTesting:`Test için API Anahtarı`,apiKeyPlaceholder:`Kimlik doğrulamalı uç noktaları test etmek için API anahtarınızı buraya yapıştırın...`,apiKeyHint:`Bu anahtar isteklerle birlikte X-API-Key başlığı olarak gönderilecek.`,deleteApiKeyTitle:`API Anahtarını Sil`,deleteApiKeyMessage:`Bu API anahtarını silmek istediğinizden emin misiniz? Bu anahtarı kullanan tüm entegrasyonlar çalışmayı durduracak.`,deleteKey:`Anahtarı Sil`,amsDisplayThresholds:`AMS Görüntü Eşikleri`,amsThresholdsDescription:`AMS nem ve sıcaklık göstergeleri için renk eşiklerini yapılandırın.`,humidity:`Nem`,goodGreen:`İyi (yeşil)`,fairOrange:`Orta (turuncu)`,aboveFairBad:`Orta eşiğin üstü kırmızı olarak gösterilir (kötü)`,fairAlsoDryingThreshold:`Bu eşik aynı zamanda etkinleştirildiğinde otomatik kurutmayı tetiklemek için de kullanılır`,fairBelowDryingFloor:`Otomatik kurutma bu değere ulaşamaz: bir AMS, ısıtıcısı çalışırken %{{floor}} veya daha fazlasını bildirir, bu yüzden her döngü biter ve hemen yeniden başlar. Otomatik kurutma kullanıyorsanız %{{floor}} üzerine çıkarın.`,temperature:`Sıcaklık`,goodBlue:`İyi (mavi)`,aboveFairHot:`Orta eşiğin üstü kırmızı olarak gösterilir (sıcak)`,tempAlarmThreshold:`Alarm eşiği`,tempAlarmSeparateFromBand:`Bildirimleri yalnızca alarm eşiği gönderir — İyi ve Orta yalnızca göstergeyi renklendirir. Eskisi gibi orta eşikte alarm vermek için boş bırakın.`,tempAlarmMustBePositive:`Sıfır veya daha küçük bir eşik yok sayılır — alarm orta eşiği kullanır.`,historyRetention:`Geçmiş Saklama`,keepSensorHistory:`Sensör geçmişini sakla`,historyRetentionDescription:`Daha eski nem ve sıcaklık verileri otomatik olarak silinecek`,defaultPrintOptions:`Varsayılan Baskı Seçenekleri`,defaultPrintOptionsDescription:`Yeni baskılar başlatılırken baskı seçenekleri için varsayılan değerleri ayarlayın. Bunlar baskı iletişim kutusunda baskı başına geçersiz kılınabilir.`,defaultBedLevelling:`Tabla Seviyelendirme`,defaultBedLevellingDesc:`Baskıdan önce tablayı otomatik seviyelendir`,defaultFlowCali:`Akış Kalibrasyonu`,defaultFlowCaliDesc:`Ekstrüzyon akışını kalibre et`,defaultVibrationCali:`Titreşim Kalibrasyonu`,defaultVibrationCaliDesc:`Çınlama artefaktlarını azalt`,defaultLayerInspect:`İlk Katman Denetimi`,defaultLayerInspectDesc:`İlk katmanın AI denetimi`,defaultTimelapse:`Zaman Atlamalı Video`,defaultTimelapseDesc:`Zaman atlamalı video kaydet`,defaultNozzleOffsetCali:`Nozül Ofset Kalibrasyonu`,defaultNozzleOffsetCaliDesc:`Ekstrüderler arasındaki nozül ofsetlerini kalibre et`,tempFanPresetsTitle:`Sıcaklık ve Fan Ön Ayarları`,tempFanPresetsDescription:`Yazıcı kartı sıcaklık ve fan hızı pencerelerinde gösterilen hızlı seçim değerlerini özelleştirin. Kapalı düğmesi her zaman gösterilir.`,tempFanPresetsNozzle:`Nozül sıcaklığı`,tempFanPresetsBed:`Tabla sıcaklığı`,tempFanPresetsChamber:`Hazne sıcaklığı`,tempFanPresetsFan:`Fan hızı`,tempFanPresetsReset:`Varsayılanlara sıfırla`,concurrentUploadsTitle:`Eşzamanlı Yüklemeler`,concurrentUploadsDescription:`Kuyruğun aynı anda kaç yazıcıya dosya gönderebileceği. Yazıcılar dosyaları yavaş alır (büyük bir baskı birkaç dakika sürebilir) ve her biri sırasını bekler; bu nedenle büyük bir filoda bu değeri artırmak, bir gruptaki son yazıcının kendisinden önceki tüm aktarımları beklemesini önler. Ağınız veya Bambuddy sunucunuz paralel aktarımlarda zorlanıyorsa değeri düşürün.`,concurrentUploadsLabel:`Aynı anda dosya gönderilen yazıcı sayısı`,concurrentUploadsHelp:`1, aynı anda tek yazıcıya gönderir (eski davranış). Varsayılan 4'tür.`,staggeredStart:`Kademeli Başlatma`,staggeredStartDescription:`Çoklu yazıcı toplu başlatmaları kademelendirilirken varsayılan grup boyutu ve aralığı. Baskı modalinde yığın başına geçersiz kılınabilir.`,preheatTitle:`Ön Isıtma & Heat Soak`,preheatDescription:`Kuyruktaki her baskı başlamadan önce tablayı (ve destekleniyorsa odayı) ısıtır ve sıcaklığı korur. Aktif oda ısıtıcısı olmayan yazıcılarda mühendislik filamentleri (PA, ABS) için yararlıdır — soak zamanlayıcısı çalışırken tabla, odayı radyasyonla ısıtır. Tabla hedef sıcaklığı baskı dosyasından okunur; oda davranışı yazıcı modeline bağlıdır.`,preheatEnabled:`Ön ısıtma & soak'u etkinleştir`,preheatEnabledDesc:`Kapalıyken kuyruktaki baskılar hemen başlar. Her kuyruk öğesi baskı bazında geçersiz kılabilir.`,preheatFilamentTargetsLabel:`Filament başına oda hedefi (°C)`,preheatFilamentTargetsHint:`Bambuddy yüklü AMS yuvaları arasındaki en yüksek hedefi seçer. Tüm yuvaları 0 türeten baskılar — PLA, PETG, TPU, PVA — ön ısıtmayı tamamen atlar ve hemen başlar.`,preheatFilamentTargetsReset:`Varsayılanlara sıfırla`,preheatFilamentTargetsDefaultRow:`Diğer / eşlenmemiş`,preheatMaxWait:`Maks. bekleme (saniye)`,preheatMaxWaitHelp:`Soak'a geçilmeden önce oda ısıtma aşaması için üst sınır.`,preheatSoak:`Soak (saniye)`,preheatSoakHelp:`Hedefe ulaşıldıktan veya maks. bekleme dolduktan sonra tutma süresi.`,preheatHardwareTitle:`Yazıcıya göre davranış:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E odayı M141 ile aktif ısıtır. X1C/P2S oda sıcaklığını okur ancak yalnızca tabla radyasyonu ile ısınır. P1S/P1P/A1/A1 Mini'de oda sensörü yoktur — yalnızca soak zamanlayıcısı geçerlidir.`,preheatPerItemDesc:`Bu baskı başlamadan önce tablayı ve odayı ısıtın. Varsayılan olarak Ayarlar → İş Akışı genel anahtarını kullanır.`,preheatOverride_inherit:`Devral`,preheatOverride_on:`Açık`,preheatOverride_off:`Kapalı`,calibrationMode_off:`Kapalı`,calibrationMode_on:`Açık`,calibrationMode_auto:`Otomatik`,preheatTargetOverride:`Oda hedefini geçersiz kıl (°C, boş = filament varsayılanı)`,preheatTargetOverrideHelp:`0, oda olmadan tablayı ısıtır ve bekleme süresini uygular. Boş bırakılırsa oda gerektirmeyen bir baskı ön ısıtmayı tamamen atlar.`,plateClear:`Plaka Temizleme Onayı`,requirePlateClear:`Plaka temizleme onayı gerektir`,requirePlateClearDescription:`Etkinleştirildiğinde, planlayıcı bitmiş işleri olan yazıcılarda kuyruktaki baskıları başlatmadan önce yazıcı başına plaka temizleme onayını bekler. Bunu devre dışı bırakmak ayrıca plaka durum rozetini ve yazıcı kartlarındaki "Plakayı temizlendi olarak işaretle" düğmesini gizler.`,keepBedWarm:`Baskılar arasında yatak sıcaklığını koru`,keepBedWarmDesc:`Plaka temizleme onayı beklenirken, yatağı aşağıdaki sıcak tutma sıcaklığında tutarak hazneyi sıcak tutar — veya bir sonraki baskının yatak sıcaklığı daha yüksekse onu kullanır. Yalnızca bir sonraki baskının hazne ısıtması gerektirmesi durumunda uygulanır (ASA, ABS, PA, PC vb.). Plaka temizleme onayının etkinleştirilmiş olması gerekir.`,keepWarmBedTemp:`Sıcak tutma yatak sıcaklığı (°C)`,keepWarmBedTempHelp:`Yatağın görevi hazneyi ısıtmak olduğunda kullanılır: sıcak tutma sırasında ve baskı dosyasında yatak sıcaklığı bulunmadığında ön ısıtmada. Baskı dosyasındaki daha yüksek bir sıcaklık her zaman önceliklidir.`,keepWarmMaxMinutes:`Sıcak tutmayı şu süre sonunda durdur (dakika)`,keepWarmMaxMinutesHelp:`Plaka bu süre içinde boşaltılmazsa ısıtıcılar süresiz açık kalmak yerine kapatılır.`,gcodeInjection:`G-kod Enjeksiyonu`,gcodeInjectionDescription:`Farmloop, SwapMod, AutoClear ve Printflow 3D gibi otomatik baskı sistemleri için baskıların başlangıcında ve/veya sonunda enjekte edilecek özel G-kodu yapılandırın. Parçacıklar yazıcı modeli başına yapılandırılır ve bir kuyruk öğesinde "G-kod Enjekte Et" etkinleştirildiğinde uygulanır.`,gcodeInjectionNoPrinters:`Yazıcı bulunamadı. G-kod parçacıklarını yapılandırmak için yazıcı ekleyin.`,gcodeStartLabel:`Başlangıç G-kodu`,gcodeEndLabel:`Bitiş G-kodu`,gcodeStartPlaceholder:`Baskı başlamadan önce eklenecek G-kodu...`,gcodeEndPlaceholder:`Baskı bittikten sonra eklenecek G-kodu...`,staggerGroupSize:`Grup boyutu`,staggerGroupSizeHelp:`Grup başına eş zamanlı başlatılacak yazıcılar`,staggerInterval:`Aralık (dakika)`,staggerIntervalHelp:`Her grubun başlatılması arasındaki gecikme`,queueDrying:`Kuyruk Otomatik Kurutma`,queueDryingDescription:`Kuyruktaki baskılar arasında yazıcı boştayken AMS filamentini otomatik olarak kurut. Kurutmayı tetiklemek için yukarıdaki nem eşiğini kullanır.`,queueDryingEnabled:`Otomatik kurutmayı etkinleştir`,queueDryingEnabledDescription:`Yazıcı boştayken ve nem eşiğin üzerindeyken AMS kurutmasını otomatik olarak başlat`,queueDryingBlock:`Kurutmanın tamamlanmasını bekle`,queueDryingBlockDescription:`Kurutma bitene kadar baskı kuyruğunu engelle. Kapalıyken, baskılar kurutmadan önceliklidir.`,ambientDryingEnabled:`Ortam kurutma`,ambientDryingEnabledDescription:`Kuyrukta baskı olmasa bile, nem eşiği aştığında boşta yazıcılarda filamenti otomatik olarak kurut.`,printDryingEnabled:`Baskı sırasında kurutmaya devam et`,printDryingEnabledDescription:`Desteklenen donanımda (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L güncel firmware ile) baskı sırasında otomatik kurutmanın çalışmaya devam etmesine izin verir. Makara koruması için kurutma sıcaklığı otomatik olarak boştaki ön ayarın 5°C altına sınırlandırılır.`,dryingPresets:`Kurutma Ön Ayarları`,dryingPresetsDescription:`Filament türü başına sıcaklık ve süre. AMS 2 Pro daha düşük sıcaklıklar kullanır, AMS-HT daha yüksek sıcaklıkları destekler.`,dryingFilament:`Filament`,humidityThresholds:`Nem Eşikleri`,humidityThresholdsDescription:`Otomatik kurutma ve alarmlar için filament türüne göre nem tetikleyici. Tek AMS'te karışık yükler en düşük eşiği kullanır.`,humidityThresholdCol:`Eşik`,humidityThresholdDefault:`Varsayılan (bilinmeyen türler)`,printModal:`Baskı Modali`,expandCustomMapping:`Özel eşlemeyi varsayılan olarak genişlet`,expandCustomMappingDescription:`Birden fazla yazıcıya yazdırırken, yazıcı başına AMS eşlemesini genişletilmiş olarak göster`,authentication:`Kimlik Doğrulama`,authEnabledDescription:`Örneğiniz kullanıcı kimlik doğrulamayla güvende`,authDisabledDescription:`Girişi gerektirmek ve kullanıcı erişimini yönetmek için etkinleştir`,authDisabledMessage:`Kullanıcı hesapları oluşturmak, izinleri yönetmek ve Bambuddy örneğinizi güvende tutmak için kimlik doğrulamayı etkinleştirin.`,enableAuthentication:`Kimlik Doğrulamayı Etkinleştir`,currentUser:`Mevcut Kullanıcı`,changePassword:`Parolayı Değiştir`,admin:`Yönetici`,users:`Kullanıcılar`,addUser:`Kullanıcı Ekle`,groups:`Gruplar`,addGroup:`Grup Ekle`,system:`Sistem`,noDescription:`Açıklama yok`,userCount:`{{count}} kullanıcı`,permissionCount:`{{count}} izin`,createUser:`Kullanıcı Oluştur`,username:`Kullanıcı Adı`,enterUsername:`Kullanıcı adı girin`,password:`Parola`,enterPassword:`Parola girin`,passwordRequirements:`En az 8 karakter, bir büyük harf, bir küçük harf, bir rakam ve bir özel karakter ile.`,confirmPassword:`Parolayı Onayla`,confirmPasswordPlaceholder:`Parolayı onayla`,viewReleaseOnGitHub:`Yayını GitHub'da görüntüle`,turnAllPlugsOn:`Tüm prizleri aç`,turnAllPlugsOff:`Tüm prizleri kapat`,clearNotificationLogs:`Bildirim Günlüklerini Temizle`,clearLogsMessage:`Bu, 30 günden eski tüm bildirim günlüklerini kalıcı olarak silecek. Bu işlem geri alınamaz.`,clearLogs:`Günlükleri Temizle`,resetUiPreferences:`Arayüz Tercihlerini Sıfırla`,resetUiPreferencesMessage:`Bu, tüm arayüz tercihlerini varsayılana sıfırlayacak: kenar çubuğu sırası, tema, gösterge paneli düzeni, görünüm modları ve sıralama tercihleri. Yazıcılarınız, arşivleriniz ve sunucu ayarlarınız ETKİLENMEYECEK. Sayfa temizleme sonrası yeniden yüklenecek.`,resetPreferences:`Tercihleri Sıfırla`,deleteGroupTitle:`Grubu Sil`,deleteGroupMessage:`Bu grubu silmek istediğinizden emin misiniz? Bu gruptaki kullanıcılar bu izinleri kaybedecek.`,deleteGroup:`Grubu Sil`,disableAuthenticationTitle:`Kimlik Doğrulamayı Devre Dışı Bırak`,disableAuthenticationMessage:`Kimlik doğrulamayı devre dışı bırakmak istediğinizden emin misiniz? Bu, Bambuddy örneğinizi giriş yapmadan erişilebilir hale getirecek. Tüm kullanıcılar veritabanında kalacak ancak kimlik doğrulama devre dışı bırakılacak.`,disableAuthentication:`Kimlik Doğrulamayı Devre Dışı Bırak`,configureBambuddy:`Bambuddy'yi Yapılandır`,systemDefault:`Sistem Varsayılanı`,archiveSettings:`Arşiv Ayarları`,newWindow:`Yeni Pencere`,embeddedOverlay:`Gömülü Bindirme`,preferredSlicer:`Tercih Edilen Dilimleyici`,preferredSlicerDescription:`Uygulama içi dilimleme için API yardımcı kabıyla kullanılan dilimleyici`,openInSlicerLabel:`Dilimleyicide Aç`,openInSlicerInherit:`API dilimleyicisiyle aynı`,openInSlicerDescription:`'Dilimleyicide Aç' düğmesinin kullandığı masaüstü dilimleyici. Devralmak için 'API dilimleyicisiyle aynı' bırakın veya yerel olarak kullanmak için farklı bir dilimleyici seçin.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev, birçok Bambu yazılı 3MF'nin dilimlenmesini engelleyen bilinen CLI hatalarına sahiptir — yukarı yöndeki #12426 (boyalı çok ekstrüderli dosyalarda segfault) ve #13386 (parametre aralığı katı doğrulama reddi) sorunlarına bakın. Yukarı yön düzeltmeler gelene kadar Bambu Studio önerilir.`,useSlicerApi:`Dilimleyici API kullan`,useSlicerApiDescription:`Açıkken, "Dilimle" eylemleri uygulama içi dilimleyici modalini açar ve dilimleyici-API yardımcı bileşenini çağırır. Kapalıyken (varsayılan), URI şeması üzerinden masaüstü dilimleyiciye devredilirler.`,slicerCard:`Dilimleyici`,orcaslicerApiUrl:`OrcaSlicer yardımcı bileşen URL`,bambuStudioApiUrl:`Bambu Studio yardımcı bileşen URL`,slicerStallTimeout:`Dilimleyici duraklama zaman asimi (dakika)`,slicerStallTimeoutDescription:`Sidecar bu sure boyunca ilerleme bildirmezse dilimleme iptal edilir. Ilerleme bildirmeye devam eden agir modeller ne kadar surerse sursun kesilmez. Ilerleme bildirmeyen sidecar surumleri bu degeri toplam sure siniri olarak kullanir.`,slicerApiUrlDescription:`Dilimleyici-API yardımcı bileşen konteynerinin URL'si. SLICER_API_URL / BAMBU_STUDIO_API_URL ortam değişkeni varsayılanlarını kullanmak için boş bırakın.`,externalCameras:`Harici Kameralar`,costTracking:`Maliyet Takibi`,billingEnabled:`Faturalandırmayı etkinleştir`,billingEnabledDescription:`Kullanıcılardan baskı ücreti alın ve finans özelliklerini etkinleştirin`,printerKillSwitch:`Yetkisiz baskıyı otomatik durdurma`,printerKillSwitchDescription:`Yetkilendirme olmadan başlayan baskıları hemen durdurur.`,financeBudgetReset:`Aylık finans bütçesi sıfırlama`,financeBudgetResetDay:`Sıfırlama günü`,financeBudgetResetDayHelp:`Kısa aylarda sıfırlama ayın son gününde yapılır.`,financeBudgetResetTimezone:`Sıfırlama saat dilimi`,financeBudgetResetTimezoneHelp:`Bütçe döneminin başlangıcı bu saat dilimine göre hesaplanır.`,rebuildLedger:`Cüzdan hesap defterini yeniden oluştur`,rebuildLedgerStarted:`Hesap defteri yeniden oluşturulmaya başlandı`,rebuildLedgerConfirmTitle:`Cüzdan hesap defteri yeniden oluşturulsun mu?`,rebuildLedgerConfirmMessage:`Geçmiş bakiye değerlerini onarmak için cüzdan hesap defteri yeniden oluşturulacaktır. Bunu yalnızca ne yaptığınızı biliyorsanız çalıştırın.`,rebuildLedgerInProgress:`Yeniden oluşturma başlatılıyor...`,printsOnly:`Yalnızca Baskılar`,totalConsumption:`Toplam Tüketim`,dataManagement:`Veri Yönetimi`,storageUsage:`Depolama Kullanımı`,storageUsageDescription:`Kategoriye göre veri kullanımı dökümü`,storageUsageTotal:`Toplam`,storageUsageErrors:`Hatalar`,storageUsageOtherBreakdown:`Diğer (statik varlıklar, betikler ve yapılandırma dosyaları dahil)`,storageUsageSystem:`Sistem`,storageUsageData:`Veri`,storageUsageUnavailable:`Depolama kullanım bilgisi mevcut değil`,clearNotificationLogsDescription:`30 günden eski bildirim günlüklerini sil`,resetUiPreferencesDescription:`Kenar çubuğu sırası, tema, görünüm modları ve düzen tercihlerini sıfırla. Yazıcılar, arşivler ve ayarlar etkilenmez.`,enableHomeAssistant:`Home Assistant'ı Etkinleştir`,enableMqtt:`MQTT'yi Etkinleştir`,useTls:`TLS Kullan`,enableMetricsEndpoint:`Metrikler Uç Noktasını Etkinleştir`,availableMetrics:`Kullanılabilir Metrikler`,editUser:`Kullanıcıyı Düzenle`,deleteUserTitle:`Kullanıcıyı Sil`,groupName:`Grup Adı`,leaveEmptyForAnonymous:`Anonim için boş bırakın`,leaveEmptyForNoAuth:`Kimlik doğrulama olmaması için boş bırakın`,enterNewPassword:`Yeni parola girin`,confirmNewPassword:`Yeni parolayı onayla`,enterGroupName:`Grup adını girin`,enterDescriptionOptional:`Açıklama girin (isteğe bağlı)`,enterCurrentPassword:`Mevcut parolayı girin`,enterNewPasswordMin6:`Yeni parolayı girin (en az 6 karakter)`,toast:{keyCopied:`Anahtar panoya kopyalandı`,copyFailed:`Anahtar kopyalanamadı`,keyAddedToBrowser:`Anahtar API Tarayıcısına eklendi`,clearLogsFailed:`Günlükler temizlenemedi`,uiPreferencesReset:`Arayüz tercihleri sıfırlandı. Yenileniyor...`,authDisabled:`Kimlik doğrulama başarıyla devre dışı bırakıldı`,authDisableFailed:`Kimlik doğrulama devre dışı bırakılamadı`,apiKeyCreated:`API anahtarı oluşturuldu`,apiKeyDeleted:`API anahtarı silindi`,userCreated:`Kullanıcı başarıyla oluşturuldu`,userUpdated:`Kullanıcı başarıyla güncellendi`,userDeleted:`Kullanıcı başarıyla silindi`,groupCreated:`Grup başarıyla oluşturuldu`,groupUpdated:`Grup başarıyla güncellendi`,groupDeleted:`Grup başarıyla silindi`,fillRequiredFields:`Lütfen tüm zorunlu alanları doldurun`,passwordsDoNotMatch:`Parolalar eşleşmiyor`,passwordTooShort:`Parola en az 8 karakter olmalı`,passwordNeedsUppercase:`Parola en az bir büyük harf içermeli`,passwordNeedsLowercase:`Parola en az bir küçük harf içermeli`,passwordNeedsDigit:`Parola en az bir rakam içermeli`,passwordNeedsSpecial:`Parola en az bir özel karakter içermeli`,enterGroupName:`Lütfen bir grup adı girin`,settingsSaved:`Ayarlar kaydedildi`,noPermissionUpdate:`Ayarları değiştirme izniniz yok`,cameraSettingsSaved:`Kamera ayarları kaydedildi`,enterCameraUrl:`Lütfen bir kamera URL'si girin`,passwordChanged:`Parola başarıyla değiştirildi`,connectionFailed:`Bağlantı başarısız`,testFailed:`Test başarısız`,cameraConnected:`Kamera bağlandı{{resolution}}`,cameraConnectedCoalesced:`Kamera bağlandı{{resolution}} (hâlihazırda süren bir yakalamayla paylaşıldı)`},testConnection:`Bağlantıyı Test Et`,catalog:{spoolCatalog:`Makara Kataloğu`,spoolCatalogDescription:`Marka/türe göre boş makara ağırlıkları. Makara eklerken otomatik ağırlık araması için kullanılır.`,searchCatalog:`Katalogda ara...`,addNewEntry:`Yeni Giriş Ekle`,namePlaceholder:`Ad (örn., Bambu Lab - Plastik)`,weight:`Ağırlık`,type:`Tür`,default:`Varsayılan`,custom:`Özel`,noMatch:`Aramanızla eşleşen giriş yok`,empty:`Katalogda giriş yok`,deleteEntry:`Girişi Sil`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz?`,resetCatalog:`Kataloğu Sıfırla`,resetConfirm:`Katalog varsayılana sıfırlansın mı? Bu, tüm özel girişleri kaldıracak.`,loadFailed:`Makara kataloğu yüklenemedi`,nameWeightRequired:`Ad ve ağırlık gereklidir`,entryAdded:`Giriş eklendi`,addFailed:`Giriş eklenemedi`,entryUpdated:`Giriş güncellendi`,updateFailed:`Giriş güncellenemedi`,entryDeleted:`Giriş silindi`,deleteFailed:`Giriş silinemedi`,resetSuccess:`Katalog varsayılana sıfırlandı`,resetFailed:`Katalog sıfırlanamadı`,exported:`{{count}} giriş dışa aktarıldı`,imported:`{{added}} giriş içe aktarıldı ({{skipped}} atlandı)`,importFailed:`İçe aktarma başarısız: geçersiz JSON formatı`,exportTooltip:`Kataloğu JSON'a dışa aktar`,importTooltip:`Kataloğu JSON'dan içe aktar`,resetTooltip:`Varsayılana sıfırla`,selectedCount:`{{count}} seçildi`,deleteSelected:`Seçilenleri Sil`,bulkDeleteConfirm:`{{count}} girişi silmek istediğinizden emin misiniz?`,bulkDeleted:`{{count}} giriş silindi`,bulkDeleteFailed:`Girişler silinemedi`,material:`Malzeme`,spoolWeight:`Makara Ağırlığı`,color:`Renk`,updateSpoolWeight:`Makara Ağırlığını Güncelle`,filamentUpdated:`Filament güncellendi`,filamentUpdateFailed:`Filament güncellenemedi`,filamentUpdateInvalid:`Geçersiz filament verisi`,keepExistingSpoolWeight:`Mevcut makaralar için eski ağırlığı koru`,keepExistingSpoolWeightDesc:`Bu filament türüyle önceden oluşturulmuş makaralar eski boş ağırlığı korur. Yeni makaralar güncellenmiş değeri kullanır.`,applyToAllSpools:`Tüm makaralara uygula`,applyToAllSpoolsDesc:`Bu filament türü için tüm ağırlık hesaplamaları hemen yeni boş ağırlığı kullanır.`},colorCatalog:{title:`Renk Kataloğu`,description:`Üreticiye/malzemeye göre filament renkleri. Makara eklerken otomatik renk araması için kullanılır.`,searchColors:`Renklerde ara...`,allManufacturers:`Tüm üreticiler`,addNewColor:`Yeni Renk Ekle`,manufacturer:`Üretici`,colorName:`Renk Adı`,hex:`Hex`,materialOptional:`Malzeme (isteğe bağlı)`,showing:`{{total}} renkten {{filtered}} tanesi gösteriliyor`,noMatch:`Aramanızla eşleşen renk yok`,empty:`Katalogda renk yok`,deleteColor:`Rengi Sil`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz?`,resetCatalog:`Renk Kataloğunu Sıfırla`,resetConfirm:`Katalog varsayılana sıfırlansın mı? Bu, tüm özel renkleri kaldıracak.`,sync:`Senkronize Et`,starting:`Başlatılıyor...`,syncTooltip:`FilamentColors.xyz'den senkronize et (2000+ renk, bir dakika sürebilir)`,loadFailed:`Renk kataloğu yüklenemedi`,fieldsRequired:`Üretici, renk adı ve hex renk gereklidir`,colorAdded:`Renk eklendi`,addFailed:`Renk eklenemedi`,colorUpdated:`Renk güncellendi`,updateFailed:`Renk güncellenemedi`,colorDeleted:`Renk silindi`,deleteFailed:`Renk silinemedi`,resetSuccess:`Renk kataloğu varsayılana sıfırlandı`,resetFailed:`Katalog sıfırlanamadı`,syncUpToDate:`Zaten güncel ({{count}} renk kontrol edildi)`,syncComplete:`{{added}} yeni renk eklendi ({{skipped}} zaten mevcuttu)`,syncError:`Senkronizasyon hatası`,syncFailed:`FilamentColors.xyz'den senkronize edilemedi`,exported:`{{count}} renk dışa aktarıldı`,imported:`{{added}} renk içe aktarıldı ({{skipped}} atlandı)`,importFailed:`İçe aktarma başarısız: geçersiz JSON formatı`,selectedCount:`{{count}} seçildi`,deleteSelected:`Seçilenleri Sil`,bulkDeleteConfirm:`{{count}} rengi silmek istediğinizden emin misiniz?`,bulkDeleted:`{{count}} renk silindi`,bulkDeleteFailed:`Renkler silinemedi`},dateFormat:`Tarih Formatı`,dateFormatUs:`ABD (AA/GG/YYYY)`,dateFormatEu:`AB (GG/AA/YYYY)`,dateFormatIso:`ISO (YYYY-AA-GG)`,timeFormat:`Saat Formatı`,timeFormat12:`12 saat (3:30 PM)`,timeFormat24:`24 saat (15:30)`,defaultPrinter:`Varsayılan Yazıcı`,defaultPrinterDescription:`Yüklemeler, tekrar baskılar ve diğer işlemler için bu yazıcıyı önceden seç.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Öğeleri yeniden sıralamak, görünürlüğü sıfırlamak ve özel bağlantıları yönetmek için Kenar çubuğu düzenini kullanın.`,setDefault:`Varsayılan Yap`,sidebarOrderSetDefaultHint:`Varsayılan ayarla, mevcut menü sırasını henüz özelleştirmemiş kullanıcılara uygular.`,sidebarDefaultSet:`Varsayılan menü sırası ayarlandı.`,sidebarDefaultCleared:`Varsayılan menü sırası temizlendi.`,sidebarDefaultFailed:`Varsayılan menü sırası ayarlanamadı.`,reset:`Sıfırla`,darkMode:`Koyu Mod`,lightMode:`Açık Mod`,active:`(aktif)`,background:`Arka Plan`,accent:`Vurgu`,style:`Stil`,bgNeutral:`Nötr`,bgWarm:`Sıcak`,bgCool:`Soğuk`,bgOled:`OLED Siyah`,bgSlate:`Arduvaz Mavisi`,bgForest:`Orman Yeşili`,accentGreen:`Yeşil`,accentTeal:`Camgöbeği`,accentBlue:`Mavi`,accentOrange:`Turuncu`,accentPurple:`Mor`,accentRed:`Kırmızı`,styleClassic:`Klasik`,styleGlow:`Parıltı`,styleVibrant:`Canlı`,themeToggleHint:`Kenar çubuğundaki güneş/ay simgesini kullanarak koyu ve açık mod arasında geçiş yapın.`,progressInTitle:`Sekmede baskı ilerlemesi`,progressInTitleDescription:`Tarayıcı sekmesinde etkin baskının yüzdesini ve bir ilerleme halkası gösterir.`,autoArchivePrints:`Baskıları otomatik arşivle`,autoArchiveDescription:`Baskılar tamamlandığında 3MF dosyalarını otomatik olarak kaydet`,saveThumbnailsDescription:`3MF dosyalarından önizleme görüntülerini çıkar ve kaydet`,captureFinishPhotoDescription:`Baskı tamamlandığında yazıcı kamerasından bir fotoğraf çek. Bambuddy, baskı sırasında kısa bir zaman atlamalı kayıt yapar, böylece fotoğraf tabla inmeden önceki andan alınabilir. Bu baskı için zaman atlamalı kaydı etkinleştirdiyseniz dosya saklanır, aksi takdirde fotoğraf çekildikten sonra otomatik olarak silinir.`,finishPhotoRestorePlate:`Bitiş fotoğrafı için tablayı yükselt`,finishPhotoRestorePlateDescription:`Yazıcı, baskı bittiğinde tablayı yaklaşık 100 mm aşağı indirir ve tamamlanmış baskı kameranın çerçevesinin altında kalır. Bambuddy tablayı son basılan katmanın hemen üzerine geri kaldırır, fotoğrafı çeker ve ardından tekrar indirir. Baskı yüksekliği bilinmiyorsa veya kuyrukta başka bir iş varsa atlanır.`,ffmpegNotInstalled:`ffmpeg yüklü değil`,ffmpegRequired:`Kamera yakalama ffmpeg gerektirir. <brew>brew install ffmpeg</brew> (macOS) veya <apt>apt install ffmpeg</apt> (Linux) ile yükleyin.`,camera:`Kamera`,cameraViewMode:`Kamera Görüntüleme Modu`,cameraOverlayDescription:`Kamera ana ekranda yeniden boyutlandırılabilir bir bindirmede açılır`,cameraWindowDescription:`Kamera ayrı bir tarayıcı penceresinde açılır`,externalCamerasDescription:`Yerleşik yazıcı kamerasını değiştirmek için harici kameraları yapılandırın. MJPEG akışlarını, RTSP, HTTP anlık görüntüleri ve USB kameralarını (V4L2) destekler. Etkinleştirildiğinde, harici kamera canlı görüntüleme ve bitiş fotoğrafları için kullanılır.`,cameraPlaceholderUsb:`Cihaz yolu (/dev/video0)`,cameraPlaceholderUrl:`Kamera URL'si (rtsp://... veya http://...)`,cameraTypeMjpeg:`MJPEG Akışı`,cameraTypeRtsp:`RTSP Akışı`,cameraTypeSnapshot:`HTTP Anlık Görüntü`,cameraTypeUsb:`USB Kamera (V4L2)`,cameraSnapshotUrl:`Anlık Görüntü URL (isteğe bağlı)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`Bildirim küçük resimleri, bitiş fotoğrafları, katman zaman atlamalı kareler ve plaka algılama için kullanılan tek kare URL'si. Zaman atlamalı video ve plaka algılama, her birinin kendi yazıcı başına anahtarı gerektirir — bu URL yalnızca aktif olduklarında çektikleri görüntü kaynağıdır. Yukarıdaki canlı akıştan yakalamak için boş bırakın. go2rtc (/api/frame.jpeg) ve özel anlık görüntü uç noktasına sahip IP kameraları için kullanışlıdır.`,cameraRotation:`Döndürme`,test:`Test`,connected:`Bağlı`,disconnected:`Bağlı değil`,currency:`Para Birimi`,defaultFilamentCost:`Varsayılan filament maliyeti (kg başına)`,electricityCost:`kWh başına elektrik maliyeti`,energyDisplayMode:`Enerji görüntüleme modu`,energyModePrintDescription:`Gösterge paneli, baskılar sırasında kullanılan enerji toplamını gösterir`,energyModeTotalDescription:`Gösterge paneli, akıllı prizlerden ömür boyu enerjiyi gösterir`,fileManager:`Dosya Yöneticisi`,createArchiveEntry:`Yazdırırken Arşiv Girişi Oluştur`,createArchiveEntryDescription:`Dosya Yöneticisinden yazdırırken isteğe bağlı olarak bir arşiv girişi oluştur`,lowDiskSpaceWarning:`Düşük Disk Alanı Uyarısı`,lowDiskSpaceDescription:`Boş disk alanı bu eşiğin altına düştüğünde uyarı göster`,printerFirmware:`Yazıcı Firmware`,checkFirmwareDescription:`Bambu Lab'dan yazıcı firmware güncellemelerini kontrol et`,bambuddySoftware:`Bambuddy Yazılımı`,autoCheckDescription:`Başlangıçta otomatik olarak yeni sürümleri kontrol et`,checkNow:`Şimdi kontrol et`,updateAvailableVersion:`Güncelleme mevcut: v{{version}}`,releaseNotes:`Sürüm Notları`,updateViaDocker:`Docker Compose ile güncelle:`,composeDirectory:`Compose dizini`,composeDirectoryHint:`docker-compose.yml dosyanızın bulunduğu dizin. cd eklenmemesi için boş bırakın.`,copyUpdateCommand:`Güncelleme komutunu kopyala`,updateViaHomeAssistant:`Güncellemeler Home Assistant Supervisor tarafından yönetilir. Yeni sürümü yüklemek için Home Assistant'ta Ayarlar → Eklentiler → Bambuddy'ye gidin.`,updateViaWindowsInstaller:`Windows kurulumları, kurucu yeniden çalıştırılarak güncellenir. Yeni sürümü aşağıdan indirin — verileriniz, ayarlarınız ve yazıcılarınız korunur.`,downloadWindowsInstaller:`v{{version}} için kurucuyu indir`,installUpdate:`Güncellemeyi Yükle`,latestVersionRunning:`En son sürümü çalıştırıyorsunuz`,failedToCheckUpdates:`Güncellemeler kontrol edilemedi: {{error}}`,backupRestore:`Yedekleme ve Geri Yükleme`,backupRestoreDescription:`Ayarları dışa/içe aktar ve GitHub yedeklemesini yapılandır`,goToBackup:`Yedeklemeye Git`,externalUrl:`Harici URL`,externalUrlDescription:`Bambuddy'nin erişilebildiği harici URL. Bildirim görüntüleri ve harici entegrasyonlar için kullanılır.`,bambuddyUrl:`Bambuddy URL`,externalUrlHint:`Protokol ve port dahil edin (örn., http://192.168.1.100:8000)`,ftpRetry:`FTP Yeniden Dene`,ftpRetryDescription:`Yazıcı WiFi güvenilmez olduğunda FTP işlemlerini yeniden dene. 3MF indirmelerine, baskı yüklemelerine, zaman atlamalı video indirmelerine ve firmware güncellemelerine uygulanır.`,autoRetryDescription:`Başarısız FTP işlemlerini otomatik olarak yeniden dene`,retryAttempts:`Yeniden deneme sayısı`,retryDelay:`Yeniden deneme gecikmesi`,connectionTimeout:`Bağlantı zaman aşımı`,time_one:`{{count}} kez`,time_other:`{{count}} kez`,second_one:`{{count}} saniye`,second_other:`{{count}} saniye`,nSeconds:`{{count}} saniye`,increaseForWeakWifi:`Zayıf WiFi'li yazıcılar için artırın`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`HA'nın REST API'si üzerinden akıllı prizleri kontrol etmek için Home Assistant'a bağlanın. switch, light, input_boolean ve script varlıklarını destekler.`,homeAssistantUrl:`Home Assistant URL`,longLivedAccessToken:`Uzun Ömürlü Erişim Belirteci`,haTokenHint:`HA'da belirteç oluşturun: Profil → Uzun Ömürlü Erişim Belirteçleri → Belirteç Oluştur`,connectionSuccessful:`Bağlantı Başarılı`,connectionFailed:`Bağlantı Başarısız`,haConnectionSuccess:`Home Assistant'a başarıyla bağlanıldı.`,haConnectionFailed:`Home Assistant'a bağlanılamadı.`,mqttPublishing:`MQTT Yayınlama`,mqttDescription:`Node-RED, Home Assistant ve diğer otomasyon sistemleriyle entegrasyon için BamBuddy olaylarını harici bir MQTT brokerına yayınla.`,mqttEnableDescription:`Olayları harici MQTT brokerına yayınla`,brokerHostname:`Broker ana bilgisayar adı`,port:`Port`,usernameOptional:`Kullanıcı adı (isteğe bağlı)`,passwordOptional:`Parola (isteğe bağlı)`,topicPrefix:`Konu öneki`,topicPrefixHint:`Konular: {{prefix}}/printers/<serial>/status, vb. olacak`,prometheusMetrics:`Prometheus Metrikleri`,prometheusEndpointDescription:`Prometheus/Grafana izleme için yazıcı metriklerini <code>/api/v1/metrics</code> adresinde sun.`,bearerTokenOptional:`Bearer Belirteci (isteğe bağlı)`,bearerTokenHint:`Ayarlandıysa, isteklerin <code>Authorization: Bearer <token></code> içermesi gerekir`,metricsConnectionStatus:`Bağlantı durumu`,metricsPrinterState:`Yazıcı durumu (boşta/yazdırılıyor/vb.)`,metricsPrintProgress:`Baskı ilerlemesi 0-100%`,metricsBedTemp:`Tabla sıcaklığı`,metricsNozzleTemp:`Nozul sıcaklığı`,metricsPrintsTotal:`Sonuca göre toplam baskılar`,metricsMore:`...ve daha fazlası (katmanlar, fanlar, kuyruk, filament kullanımı)`,smartPlugsDescription:`Güç kontrolünü otomatikleştirmek ve yazıcılarınız için enerji kullanımını takip etmek üzere akıllı prizleri (Tasmota veya Home Assistant) bağlayın.`,allOn:`Tümü Açık`,allOff:`Tümü Kapalı`,addSmartPlug:`Akıllı Priz Ekle`,energySummary:`Enerji Özeti`,currentPower:`Mevcut Güç`,plugsOnline:`{{reachable}}/{{total}} priz çevrimiçi`,today:`Bugün`,yesterday:`Dün`,total:`Toplam`,enablePlugsForSummary:`Enerji özetini görmek için prizleri etkinleştirin`,addNotificationProvider:`Ekle`,systemBadge:`(Sistem)`,creating:`Oluşturuluyor...`,changing:`Değiştiriliyor...`,deleteUserAndItems:`Kullanıcıyı VE öğelerini sil`,deleteUserKeepItems:`Kullanıcıyı sil, öğeleri tut (sahipsiz olur)`,ok:`Tamam`,twoFa:{totpTitle:`Doğrulayıcı Uygulama (TOTP)`,totpDesc:`Google Authenticator, Aegis veya Authy gibi bir doğrulayıcı uygulama kullanın.`,emailOtpTitle:`E-posta OTP`,emailOtpDesc:`Giriş yaptığınızda {{email}} adresine tek seferlik bir kod gönder.`,emailOtpNoEmail:`Bu yöntemi etkinleştirmek için hesabınıza bir e-posta adresi ekleyin.`,addEmailFirst:`Hesabınızın e-posta adresi yok. E-posta OTP'yi etkinleştirmeden önce bir yöneticiden eklemesini isteyin.`,setupTotp:`Doğrulayıcı Uygulamayı Ayarla`,setupAuthApp:`Doğrulayıcı Uygulamayı Ayarla`,setupInstructions:`Aşağıdaki QR kodunu doğrulayıcı uygulamanızla tarayın, ardından bir kodla onaylayın.`,manualEntry:`Tarayamıyor musunuz? Bu gizli anahtarı manuel olarak girin:`,scannedContinue:`Kodu taradım — devam et`,enterCodeToConfirm:`Kurulumu onaylamak için doğrulayıcı uygulamanızdan 6 haneli kodu girin.`,activate:`Etkinleştir`,disableTotp:`Doğrulayıcıyı Devre Dışı Bırak`,disableConfirmHint:`Doğrulayıcıyı devre dışı bırakmak için geçerli bir TOTP kodu veya yedek kod girin.`,totpDisabled:`Doğrulayıcı uygulama devre dışı bırakıldı.`,emailOtpEnabled:`E-posta OTP etkinleştirildi.`,emailOtpDisabled:`E-posta OTP devre dışı bırakıldı.`,smtpRequired:`Lütfen önce SMTP ayarlarını yapılandırın ve test edin.`,invalidCode:`Geçersiz kod. Lütfen tekrar deneyin.`,enableEmailOtp:`E-posta OTP'yi Etkinleştir`,disableEmailOtp:`E-posta OTP'yi Devre Dışı Bırak`,emailSetupEnterCode:`E-posta adresinize bir doğrulama kodu gönderildi. Bu kutunun sahibi olduğunuzu onaylamak için aşağıya girin.`,verifyAndEnable:`Doğrula ve Etkinleştir`,emailDisablePasswordHint:`E-posta OTP'yi devre dışı bırakmayı onaylamak için hesap parolanızı girin.`,passwordPlaceholder:`Parolanızı girin`,backupCodesTitle:`Yedek kodlarınızı kaydedin`,backupCodesWarning:`Bu kodları güvenli bir yere kaydedin. Her kod yalnızca bir kez kullanılabilir ve tekrar gösterilmeyecektir.`,backupCodesRemaining:`{{count}} yedek kod kaldı`,savedCodes:`Kodlarımı kaydettim`,regenBackup:`Yedek Kodları Yeniden Oluştur`,regenBackupHint:`10 yeni yedek kod oluşturmak için mevcut TOTP kodunuzu girin. Mevcut tüm yedek kodlar geçersiz kılınacak.`,newBackupCodes:`Yeni yedek kodlar`,linkedAccounts:`Bağlı SSO Hesapları`,linkedAccountsDesc:`Bu harici kimlik sağlayıcıları hesabınıza bağlıdır.`,oidcUnlinked:`Hesap bağlantısı kaldırıldı.`},sessionPolicy:{title:`Oturum Politikası`,description:`Yeni kullanıcı girişleri için maksimum oturum süresi. Daha önce verilmiş belirteçler özgün son kullanma tarihlerini korur.`,preset24h:`24 saat`,preset7d:`7 gün`,preset30d:`30 gün`,customHoursLabel:`Özel oturum süresi (saat)`,hoursSuffix:`saat`,warning:`Daha uzun oturumlar otomatik oturum kapatma korumasını azaltır. Yalnızca güvenilir tek kullanıcılı dağıtımlar için önerilir.`},oidc:{title:`SSO / OIDC Sağlayıcıları`,desc:`Harici kimlik sağlayıcılar aracılığıyla tek oturum açmaya izin vermek için OpenID Connect sağlayıcılarını yapılandırın.`,addProvider:`Sağlayıcı Ekle`,newProvider:`Yeni Sağlayıcı`,empty:`Henüz yapılandırılmış OIDC sağlayıcısı yok.`,created:`Sağlayıcı oluşturuldu.`,updated:`Sağlayıcı güncellendi.`,deleted:`Sağlayıcı silindi.`,refreshIcon:`Simgeyi yenile`,removeIcon:`Simgeyi kaldır`,iconRefreshed:`Simge yenilendi.`,iconRemoved:`Simge kaldırıldı.`,iconFetchFailed:`Simge sağlayıcı URL'sinden alınamadı.`,deleteTitle:`Sağlayıcıyı Sil`,deleteMessage:`"{{name}}" silinsin mi? Tüm bağlı kullanıcı hesaplarının bağlantısı kaldırılacak.`,form:{name:`Görünen Ad`,issuerUrl:`Yayıncı URL`,clientId:`İstemci Kimliği`,clientSecret:`İstemci Gizli Anahtarı`,scopes:`Kapsamlar`,iconUrl:`Simge URL (isteğe bağlı)`,enabled:`Etkin`,autoCreate:`Kullanıcıları otomatik oluştur`,autoCreateDesc:`İlk girişte otomatik olarak yerel bir hesap oluştur.`,autoLink:`Mevcut hesapları otomatik bağla`,autoLinkDesc:`İlk girişte mevcut yerel hesapları e-posta eşleştirerek bağla.`,secretHint:`mevcut olanı korumak için boş bırakın`,secretPlaceholder:`yeni gizli anahtar`,emailClaim:`E-posta İddiası`,emailClaimDesc:`E-posta kimliği olarak kullanılan JWT iddiası. Azure Entra ID için 'preferred_username' veya 'upn' kullanın (email_verified göndermez). Yalnızca güvenilir iddia adlarını kullanın.`,emailClaimPlaceholder:`email`,emailClaimCustomClaimAutoLinkWarning:`Özel iddialar yalnızca değer kiracı tarafından yönetildiğinde otomatik bağlantı için güvenlidir (örn. Azure Entra ID upn / preferred_username). Kimlik sağlayıcınız kullanıcıların bu iddiayı kendi kendine onaylamasına izin veriyorsa otomatik bağlantıyı etkinleştirmeyin.`,requireEmailVerified:`E-posta doğrulamasını gerektir`,requireEmailVerifiedDesc:`E-posta iddiasını yalnızca sağlayıcı doğrulanmış olarak işaretlediğinde kabul et.`,requireEmailVerifiedWarning:`Uyarı: e-posta doğrulama olmadan bile kabul edilecek. Yalnızca güvenilir sağlayıcılarla kullanın.`,requireEmailVerifiedAutoLink:`Bu ayarı değiştirmek için önce otomatik bağlantıyı devre dışı bırakın.`,defaultGroup:`Varsayılan Grup`,defaultGroupDesc:`Otomatik oluşturulan kullanıcılara atanan grup. Ayarlanmazsa Viewers'a geri döner.`,defaultGroupViewersFallback:`Viewers (varsayılan)`,autologin:`Otomatik oturum açma`,autologinDesc:`Kimlik doğrulaması yapılmamış ziyaretçileri doğrudan bu sağlayıcıya yönlendir. Bu işareti yalnızca bir sağlayıcı taşıyabilir.`}},encryption:{title:`MFA Şifreleme Durumu`,enabledFromEnv:`Sabit şifreleme etkin (anahtar MFA_ENCRYPTION_KEY ortam değişkeninden)`,enabledFromFile:`Sabit şifreleme etkin (anahtar veri dizininden yüklendi)`,enabledGenerated:`Sabit şifreleme otomatik oluşturulan anahtarla etkin`,notConfigured:`Sabit şifreleme yapılandırılmamış`,notConfiguredDesc:`TOTP gizli anahtarları ve OIDC client_secrets düz metin olarak saklanır. MFA_ENCRYPTION_KEY ayarlayın veya Bambuddy'yi otomatik olarak oluşturmak için yazılabilir bir veri dizini ile yeniden başlatın.`,allEncrypted:`Tüm MFA gizli anahtarları sabit olarak şifrelenmiş durumda.`,legacyRowsLabel:`Eski düz metin satırlar`,encryptedRowsLabel:`Şifrelenmiş satırlar`,legacyRowsWarning:`{{count}} eski düz metin satır algılandı. Şifrelenmiş depolamaya geçmek için OIDC sağlayıcısını yeniden kaydedin veya kullanıcının doğrulayıcı uygulamasını yeniden kaydedin.`,backupHint:`Otomatik oluşturulan anahtar DATA_DIR/.mfa_encryption_key konumunda saklanır ve yerel yedek ZIP'lere dahil edilir. Yedeklerinizi güvende tutun veya MFA_ENCRYPTION_KEY'i açıkça ayarlayın.`,decryptionBrokenTitle:`Şifreleme anahtarı eksik`,decryptionBrokenError:`Şifreleme anahtarı artık mevcut olmadığından {{count}} şifrelenmiş kayıt şifresi çözülemiyor. Kurtarmak için önceki MFA_ENCRYPTION_KEY veya DATA_DIR/.mfa_encryption_key'i geri yükleyin.`,migrationErrorWarning:`Başlangıçta {{count}} eski satır yeniden şifrelenemedi. Sunucu günlüklerini kontrol edin ve yeniden denemek için Bambuddy'yi yeniden başlatın.`},pipelineLimits:{title:`Dilimleyici pipeline limitleri`,maxCopiesLabel:`Çalıştırma başına maksimum kopya`,maxCopiesDesc:`Bir pipeline çalıştırıldığında operatörlerin isteyebileceği kopya sayısı üst sınırı. Sunucu tarafı sert sınır 1000'dir.`},pipelines:{title:`Dilimleyici Pipeline'ları`,subtitle:`Yeniden kullanılabilir ön ayar paketleri (yazıcı + işlem + filamentler + tabla türü). Dilimleme diyalogundan bir tane kaydedin ve bir sonraki dosyaya tek tıkla uygulayın.`,loading:`Pipeline'lar yükleniyor…`,loadError:`Pipeline'lar yüklenemedi.`,confirmDelete:`Bu pipeline silinsin mi? Bu işlem geri alınamaz.`,staleWarning:`Atıfta bulunulan bir veya daha fazla ön ayar artık mevcut değil. Dilimleme diyalogundan bu pipeline'ı yeniden kaydederek düzeltin.`,empty:{title:`Henüz pipeline yok.`,howto:`Herhangi bir dosya için Dilimleme diyalogunu açın, yazıcı / işlem / filamentler / tablayı seçin, sonra "Pipeline olarak kaydet"e tıklayın. Kaydedilen pipeline'larınız burada görünecek.`},field:{name:`Pipeline adı`,description:`Açıklama`,targetPrinter:`Hedef yazıcı`,noTarget:`— Hedef yok —`,targetKind:`Hedef türü`,targetKindSpecific:`Belirli yazıcı`,targetKindClass:`Yazıcı sınıfı`,targetModelClass:`Yazıcı modeli`,fanoutStrategy:`Dağıtım stratejisi`,fanout:{max_parallel:`Maksimum paralel — eşleşen boş yazıcılara dağıt`,round_robin:`Sırayla — uygun yazıcılar arasında döndür`,fill_one_first:`Önce birini doldur — tüm kopyaları tek yazıcıya sabitle`},fanoutShort:{max_parallel:`paralel`,round_robin:`sırayla`,fill_one_first:`önce bir`}},action:{save:`Kaydet`,cancel:`İptal`,rename:`Yeniden adlandır`,delete:`Sil`},slot:{printer:`Yazıcı`,process:`İşlem`,filament:`Filament`,filamentN:`Filament {{n}}`,filamentAll:`Tüm {{n}} yuva`,bed:`Tabla`},group:{profiles:`Profiller`,filaments:`Filamentler`},searchPlaceholder:`Pipeline'larda ara…`,filterTargetType:`Hedef türüne göre filtrele`,filterTarget:`Hedefe göre filtrele`,filter:{all:`Tüm hedefler`,noTarget:`Hedef belirlenmemiş`,count:`{{shown}} / {{total}}`,noMatches:`Mevcut filtrelere uyan pipeline yok.`},toast:{saved:`Pipeline kaydedildi`,saveFailed:`Kaydetme başarısız`,deleted:`Pipeline silindi`,deleteFailed:`Silme başarısız`},noTargetHint:`Çalıştırmak için bir hedef yazıcı belirleyin`,noTargetWarning:`Bu pipeline'ı çalıştırmadan önce bir hedef yazıcı belirleyin.`,runs:{lastRun:`Son çalıştırma`,status:{queued:`kuyrukta`,slicing:`dilimleniyor`,dispatching:`gönderiliyor`,in_progress:`yazdırılıyor`,completed:`tamamlandı`,failed:`başarısız`,partial_failure:`kısmi başarısızlık`,cancelled:`iptal edildi`}}}},notification:{printStarted:{title:`Baskı Başladı`,body:`{{printer}}: {{filename}} yazdırmaya başladı`},printCompleted:{title:`Baskı Tamamlandı`,body:`{{printer}}: {{filename}} başarıyla tamamlandı`},printFailed:{title:`Baskı Başarısız`,body:`{{printer}}: {{filename}} başarısız oldu`},printStopped:{title:`Baskı Durduruldu`,body:`{{printer}}: {{filename}} durduruldu`},printProgress:{title:`Baskı İlerlemesi`,body:`{{printer}}: {{filename}} %{{percent}} tamamlandı`},printerOffline:{title:`Yazıcı Çevrimdışı`,body:`{{printer}} çevrimdışı`},printerError:{title:`Yazıcı Hatası`,body:`{{printer}}: {{error}}`},filamentLow:{title:`Az Filament`,body:`{{printer}}: Filament azalıyor`},maintenanceDue:{title:`Bakım Zamanı`,body:`{{printer}}: {{items}} dikkat gerektiriyor`}},errors:{generic:`Bir şeyler ters gitti`,networkError:`Ağ hatası. Lütfen bağlantınızı kontrol edin.`,notFound:`Bulunamadı`,unauthorized:`Yetkisiz`,serverError:`Sunucu hatası`,validationError:`Lütfen girdinizi kontrol edin`,printerConnectionFailed:`Yazıcıya bağlanılamadı`,saveFailed:`Değişiklikler kaydedilemedi`,deleteFailed:`Silme başarısız`,loadFailed:`Veri yüklenemedi`},hmsErrors:{title:`Hatalar - {{name}}`,noErrors:`Hata yok`,viewOnWiki:`Bambu Lab Wiki'de görüntüle`,mqttVerifyFailedRemedy:`Yazicida Gelistirici Modunu etkinlestirin, yaziciyi yeniden baslatin ve isi tekrar baslatin.`,unknownCode:`Bilinmeyen HMS kodu — ayrıntılar için Bambu Lab wiki sayfasına bakın.`,clearInstructions:`Buradan kapatmak için yazıcıdaki hataları temizleyin.`,clearErrors:`Hataları Temizle`,clearSuccess:`HMS hataları temizlendi`,clearFailed:`HMS hataları temizlenemedi`,actionSuccess:`Eylem yazıcıya gönderildi`,actionFailed:`Eylem gönderilemedi`,runoutExpectedSlot:`{{ranOut}} slotundaki filament bitti. Yazıcı şimdi {{expected}} slotunda uyumlu filament bekliyor. {{expected}} slotuna bir makara takın ve ardından Yeniden Dene'yi seçin.`,runoutExpectedSlotOnly:`Yazıcı {{expected}} slotunda uyumlu filament bekliyor. Oraya bir makara takın ve ardından Yeniden Dene'yi seçin.`,runoutSlotUnknown:`Filament bitti ve baskı duraklatıldı. Bambuddy yazıcının şu anda hangi slotu beklediğini belirleyemedi — istenen slot için yazıcının ekranını kontrol edin.`,actions:{RESUME_PRINTING:`Baskıyı sürdür`,RESUME_PRINTING_DEFECTS:`Sürdür (kusurlar kabul edilebilir)`,RESUME_PRINTING_PROBELM_SOLVED:`Sürdür (sorun çözüldü)`,STOP_PRINTING:`Baskıyı durdur`,CHECK_ASSISTANT:`Asistanı aç`,FILAMENT_EXTRUDED:`Filament ekstrude edildi, devam et`,RETRY_FILAMENT_EXTRUDED:`Henüz ekstrude edilmedi, tekrar dene`,CONTINUE:`Tamamlandı, devam et`,LOAD_VIRTUAL_TRAY:`Filament yükle`,OK_BUTTON:`Tamam`,FILAMENT_LOAD_RESUME:`Filament yüklendi, sürdür`,JUMP_TO_LIVEVIEW:`Canlı görünümü aç`,NO_REMINDER_NEXT_TIME:`Bir daha hatırlatma`,REFRESH_NOZZLE:`Tekrar kontrol et`,IGNORE_NO_REMINDER_NEXT_TIME:`Yok say ve bir daha hatırlatma`,IGNORE_RESUME:`Yok say ve sürdür`,PROBLEM_SOLVED_RESUME:`Sorun çözüldü, sürdür`,TURN_OFF_FIRE_ALARM:`Anlaşıldı, yangın alarmını kapat`,RETRY_PROBLEM_SOLVED:`Tekrar dene (sorun çözüldü)`,CANCLE:`İptal`,STOP_DRYING:`Kurutmayı durdur`,PROCEED:`Devam et`,OK_JUMP_RACK:`Tamam`,ABORT:`İptal`,DISABLE_PURIFICATION:`Bu baskı için arıtmayı devre dışı bırak`,DONT_REMIND_NEXT_TIME:`Beni hatırlatma`,DBL_CHECK_CANCEL:`İptal`,DBL_CHECK_DONE:`Tamam`,DBL_CHECK_RETRY:`Tekrar dene`,DBL_CHECK_RESUME:`Sürdür`,DBL_CHECK_OK:`Onayla`,REMOVE_CLOSE_BTN:`Kapat`}},mqttDebug:{title:`MQTT Hata Ayıklama Günlüğü`,searchPlaceholder:`Konu veya yük ara...`,noMessages:`Henüz mesaj kaydedilmedi`,startLoggingHint:`MQTT mesajlarını yakalamaya başlamak için "Kaydetmeye Başla"ya tıklayın`,noMessagesMatch:`Filtrenizle eşleşen mesaj yok`,adjustFilterHint:`Arama veya filtre kriterlerinizi ayarlamayı deneyin`,incoming:`Gelen`,outgoing:`Giden`,loggingStopped:`Kaydetme durduruldu`,loggingActive:`Kaydetme aktif - mesajlar otomatik olarak yenilenecek`,startLogging:`Kaydetmeye Başla`,stopLogging:`Kaydetmeyi Durdur`,clearLog:`Günlüğü Temizle`,topic:`Konu`,timestamp:`Zaman damgası`,direction:`Yön`,all:`Tümü`},printerFiles:{zipStarted_one:`{{count}} dosya için ZIP indirmesi başlatıldı`,zipStarted_other:`{{count}} dosya için ZIP indirmesi başlatıldı`,zipPartial:`{{total}} dosyanın {{successful}} tanesiyle ZIP indirmesi başlatıldı; kalan dosyalar alınamadı`,downloadFailed:`İndirme başarısız: {{error}}`,unknownError:`Bilinmeyen hata`,shiftSelectHint:`Bir aralık seçmek için Shift tuşuyla tıklayın`,selectFile:`{{name}} öğesini seç`,deselectFile:`{{name}} seçimini kaldır`,title:`Dosya Yöneticisi`,storageUsed:`Kullanılan:`,storageFree:`Boş:`,filterPlaceholder:`Dosyaları filtrele...`,deleteButton:`Sil`,deleteFiles:`{{count}} Dosya Sil`,deleteFileConfirm:`"{{name}}" silinsin mi? Bu geri alınamaz.`,deleteFilesConfirm:`Seçilen {{count}} dosya silinsin mi? Bu geri alınamaz.`,noFiles:`Yazıcıda dosya yok`,printerUnavailable:`Yazıcı dosya hizmeti kullanılamıyor. Yazıcıya erişilebildiğinde tekrar deneyin.`,loadingFiles:`Dosyalar yükleniyor...`,failedToLoad:`Dosyalar yüklenemedi`,toast:{filesDeleted:`{{count}} dosya silindi`,deleteFailed:`Silme başarısız: {{error}}`}},confirm:{delete:`Bunu silmek istediğinizden emin misiniz?`,unsavedChanges:`Kaydedilmemiş değişiklikleriniz var. Çıkmak istediğinizden emin misiniz?`,clearQueue:`Kuyruğu temizlemek istediğinizden emin misiniz?`},login:{title:`Bambuddy Giriş`,subtitle:`Hesabınıza giriş yapın`,username:`Kullanıcı Adı`,usernamePlaceholder:`Kullanıcı adınızı girin`,usernameOrEmail:`Kullanıcı Adı veya E-posta`,usernameOrEmailPlaceholder:`Kullanıcı adı veya @ E-posta`,password:`Parola`,passwordPlaceholder:`Parolanızı girin`,signIn:`Giriş yap`,signingIn:`Giriş yapılıyor...`,rememberMe:`Beni Hatırla`,forgotPassword:`Parolanızı mı unuttunuz?`,autologinFailed:`Otomatik SSO girişi başarısız oldu. Devam etmek için aşağıdan bir sağlayıcı seçin.`,localDisabledNotice:`Yerel oturum açma devre dışı. Aşağıdaki SSO sağlayıcılarından birini kullanın.`,loginSuccess:`Başarıyla giriş yapıldı`,loginFailed:`Giriş başarısız`,enterCredentials:`Lütfen kullanıcı adı ve parola girin`,enterEmail:`Lütfen e-posta adresinizi girin`,oidcLoginFailed:`OIDC girişi başarısız`,oidcErrors:{providerError:`Kimlik sağlayıcısı bir hata döndürdü`,missingParameters:`OIDC geri arama gerekli parametreleri eksik`,invalidState:`OIDC durumu geçersiz veya zaten kullanılmış`,stateExpired:`OIDC giriş oturumu süresi doldu — lütfen tekrar deneyin`,providerNotFound:`OIDC sağlayıcısı bulunamadı`,discoveryFailed:`OIDC keşif belgesi alınamadı`,invalidDiscovery:`OIDC keşif belgesi geçersiz`,networkError:`OIDC belirteç değişimi sırasında ağ hatası`,badResponse:`OIDC belirteç değişimi sırasında beklenmeyen yanıt`,noIdToken:`OIDC sağlayıcısı bir ID belirteci döndürmedi`,validationFailed:`OIDC belirteç doğrulaması başarısız`,nonceMismatch:`OIDC nonce uyuşmazlığı — olası tekrar saldırısı`,missingSubClaim:`OIDC belirteci sub iddiasını içermiyor`,noLinkedAccount:`Bu OIDC kimliğine bağlı yerel hesap yok`,accountInactive:`Hesabınız aktif değil`,userResolutionFailed:`Hesabınız çözümlenemedi`,internalError:`OIDC girişi sırasında dahili bir hata oluştu`,tokenExchangeFailed:`OIDC belirteç değişimi başarısız`},forgotPasswordTitle:`Parolayı Unuttum`,forgotPasswordMessage:`Parolanızı unuttuysanız, sıfırlamak için lütfen sistem yöneticinizle iletişime geçin.`,forgotPasswordEmailMessage:`E-posta adresinizi girin, size yeni bir parola göndereceğiz.`,emailAddress:`E-posta Adresi`,emailPlaceholder:`eposta.adresi@example.com`,cancel:`İptal`,sending:`Gönderiliyor...`,sendResetEmail:`Sıfırlama E-postası Gönder`,howToReset:`Parolanızı nasıl sıfırlarsınız:`,resetStep1:`Bambuddy yöneticinizle iletişime geçin`,resetStep2:`Kullanıcı Yönetiminde parolanızı sıfırlamasını isteyin`,resetStep3:`Sizin için yeni bir geçici parola belirleyebilirler`,resetStep4:`Yeni parolayla giriş yapın ve Ayarlarda değiştirin`,gotIt:`Anladım`,resetPassword:{title:`Yeni Parola Belirle`,subtitle:`Aşağıya yeni parolanızı girin ve onaylayın.`,newPassword:`Yeni Parola`,newPasswordPlaceholder:`En az 8 karakter`,confirmPassword:`Parolayı Onayla`,confirmPasswordPlaceholder:`Yeni parolayı tekrarlayın`,saving:`Kaydediliyor…`,submit:`Yeni Parola Belirle`,backToLogin:`Girişe dön`,passwordsDoNotMatch:`Parolalar eşleşmiyor`,passwordTooShort:`Parola en az 8 karakter olmalı`,resetFailed:`Parola sıfırlama başarısız. Bağlantının süresi dolmuş olabilir.`},twoFA:{title:`İki Faktörlü Kimlik Doğrulama`,subtitle:`Hesabınız 2FA ile korunuyor. Aşağıya doğrulama kodunu girin.`,methodAuthenticator:`Doğrulayıcı Uygulama`,methodEmail:`E-posta Kodu`,methodBackup:`Yedek Kod`,instructionsTotp:`Doğrulayıcı uygulamanızı açın ve Bambuddy için 6 haneli kodu girin.`,instructionsEmail:`E-posta adresinize 6 haneli bir kod gönderildi. 10 dakika içinde sona erer.`,instructionsEmailNotSent:`E-posta yoluyla bir doğrulama kodu almak için aşağıdaki düğmeye tıklayın.`,instructionsBackup:`8 karakterlik yedek kurtarma kodlarınızdan birini girin. Her kod yalnızca bir kez kullanılabilir.`,sendCodeButton:`E-posta ile Kod Gönder`,sendingCode:`Gönderiliyor...`,resendCode:`Kodu yeniden gönder`,codeLabel:`Doğrulama Kodu`,backupCodeLabel:`Yedek Kod`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Doğrula`,verifyingButton:`Doğrulanıyor...`,backToLogin:`← Girişe dön`,orContinueWith:`veya şununla devam edin`,signInWith:`{{provider}} ile giriş yap`,enterCode:`Lütfen doğrulama kodunu girin`,sendCodeFailed:`Doğrulama kodu gönderilemedi`,invalidCode:`Geçersiz kod. Lütfen tekrar deneyin.`}},setup:{title:`Bambuddy Kurulumu`,subtitle:`Bambuddy örneğiniz için kimlik doğrulamayı yapılandırın`,enableAuth:`Kimlik Doğrulamayı Etkinleştir`,adminAccount:`Yönetici Hesabı`,adminAccountDesc:`Yönetici kullanıcılar zaten varsa, kimlik doğrulama mevcut yönetici hesapları kullanılarak etkinleştirilecek. Mevcut yöneticileri kullanmak için aşağıdaki alanları boş bırakın veya yeni bir yönetici kullanıcı oluşturmak için yeni kimlik bilgileri girin.`,adminUsername:`Yönetici Kullanıcı Adı`,adminPassword:`Yönetici Parolası`,optionalIfAdminExists:`(yönetici kullanıcılar varsa isteğe bağlı)`,adminUsernamePlaceholder:`Yönetici kullanıcı adı girin (isteğe bağlı)`,adminPasswordPlaceholder:`Yönetici parolası girin (isteğe bağlı)`,confirmPassword:`Parolayı Onayla`,confirmPasswordPlaceholder:`Yönetici parolasını onayla`,settingUp:`Kuruluyor...`,completeSetup:`Kurulumu Tamamla`,toast:{authEnabledAdminCreated:`Kimlik doğrulama etkinleştirildi ve yönetici kullanıcı oluşturuldu`,authEnabledExistingAdmins:`Mevcut yönetici kullanıcılar kullanılarak kimlik doğrulama etkinleştirildi`,setupCompleted:`Kurulum tamamlandı`,enterBothCredentials:`Lütfen hem yönetici kullanıcı adı hem de parola girin veya mevcut yönetici kullanıcıları kullanmak için her ikisini de boş bırakın`,passwordsDoNotMatch:`Parolalar eşleşmiyor`,passwordTooShort:`Parola en az 6 karakter olmalı`}},changePassword:{title:`Parolayı Değiştir`,currentPassword:`Mevcut Parola`,currentPasswordPlaceholder:`Mevcut parolayı girin`,newPassword:`Yeni Parola`,newPasswordPlaceholder:`Yeni parolayı girin (en az 6 karakter)`,confirmPassword:`Yeni Parolayı Onayla`,confirmPasswordPlaceholder:`Yeni parolayı onayla`,passwordsDoNotMatch:`Parolalar eşleşmiyor`,passwordTooShort:`Parola en az 6 karakter olmalı`,changing:`Değiştiriliyor...`,success:`Parola başarıyla değiştirildi`,failed:`Parola değiştirilemedi`},plateAlert:{title:`Baskı Duraklatıldı!`,message:`Baskı plakasında nesneler algılandı. Baskı otomatik olarak duraklatıldı. Lütfen plakayı temizleyin ve baskıya devam edin.`,understand:`Anladım`},camera:{title:`Kamera Görünümü`,invalidPrinterId:`Geçersiz yazıcı ID'si`,live:`Canlı`,snapshot:`Anlık Görüntü`,restartStream:`Akışı yeniden başlat`,refreshSnapshot:`Anlık görüntüyü yenile`,fullscreen:`Tam ekran`,exitFullscreen:`Tam ekrandan çık`,connectingToCamera:`Kameraya bağlanılıyor...`,capturingSnapshot:`Anlık görüntü yakalanıyor...`,connectionLost:`Bağlantı kesildi`,connectionFailed:`Kamera bağlantısı başarısız`,reconnecting:`{{countdown}}sn içinde yeniden bağlanılıyor... (deneme {{attempt}}/{{max}})`,reconnectNow:`Şimdi yeniden bağlan`,cameraUnavailable:`Kamera kullanılamıyor`,cameraUnavailableDesc:`Yazıcının açık ve bağlı olduğundan emin olun.`,noCamera:`Kamera yok`,retry:`Yeniden dene`,cameraStream:`Kamera akışı`,zoomOut:`Uzaklaştır`,zoomIn:`Yakınlaştır`,resetZoom:`Yakınlaştırmayı sıfırla`,recording:`Kaydediyor`,startRecording:`Kaydı Başlat`,stopRecording:`Kaydı Durdur`,chamberLight:`Hazne ışığını aç/kapat`,unavailable:`Kamera kullanılamıyor`,diagnose:{button:`Tanıla`,modalTitle:`Kamera tanılaması`,running:`Tanılama çalışıyor...`,runFailed:`Tanılama çalıştırılamadı: {{error}}`,retry:`Tekrar çalıştır`,stage:{tcp_reachable:`Ağ erişilebilirliği`,first_frame:`Kare yakalama`,live_stream_active:`Canlı akış aktif`},summary:{all_ok:`Kamera çalışıyor. Tanılama tüm aşamaları başarıyla tamamladı.`,live_stream_active_healthy:`Kamera şu anda son karelerle akış yapıyor — teste gerek yok.`,printer_unreachable:`Yazıcıya erişilemiyor. IP adresini, ağ bağlantısını ve yazıcının açık olduğunu kontrol edin.`,camera_port_closed:`Yazıcıya erişilebilir ancak kamera portu kapalı. Yazıcı ayarlarında yalnızca LAN modunun ve Geliştirici Modunun etkin olduğundan emin olun.`,no_frame:`Kameraya bağlanıldı ancak hiç kare alınmadı. Tekrar deneyin veya yazıcı ayarlarında kameranın etkin olduğunu kontrol edin.`,unknown_failure:`Kamera tanılaması bilinmeyen bir nedenle başarısız oldu. Ayrıntılar için destek günlüğüne bakın.`},meta:{protocol:`Protokol`,port:`Port`,profile:`Profil`}}},groups:{title:`Grup Yönetimi`,subtitle:`Erişim kontrolü için izin gruplarını yönetin`,backToSettings:`Ayarlara Dön`,createGroup:`Grup Oluştur`,noPermission:`Bu sayfaya erişim izniniz yok.`,system:`Sistem`,noDescription:`Açıklama yok`,usersCount:`{{count}} kullanıcı`,permissionsCount:`{{count}} izin`,edit:`Düzenle`,delete:`Sil`,toast:{created:`Grup başarıyla oluşturuldu`,updated:`Grup başarıyla güncellendi`,deleted:`Grup başarıyla silindi`,enterGroupName:`Lütfen bir grup adı girin`},modal:{editGroup:`Grubu Düzenle`,createGroup:`Grup Oluştur`,cancel:`İptal`,saving:`Kaydediliyor...`,creating:`Oluşturuluyor...`,saveChanges:`Değişiklikleri Kaydet`},form:{groupName:`Grup Adı`,groupNamePlaceholder:`Grup adını girin`,systemGroupWarning:`Sistem grubu adları değiştirilemez`,description:`Açıklama`,descriptionPlaceholder:`Açıklama girin (isteğe bağlı)`,permissions:`İzinler ({{count}} seçildi)`},deleteModal:{title:`Grubu Sil`,message:`Bu grubu silmek istediğinizden emin misiniz? Bu gruptaki kullanıcılar bu izinleri kaybedecek.`,confirm:`Grubu Sil`},editor:{title:`Grubu Düzenle`,createTitle:`Grup Oluştur`,search:`İzinlerde ara...`,selectAll:`Tümünü Seç`,clearAll:`Tümünü Temizle`,permissionsSelected:`{{count}} seçildi`,noResults:`Aramanızla eşleşen izin yok`,websocketHint:`Canlı güncellemeler için gereklidir. Bu izin olmadan arayüz düzenli yoklamaya geri döner.`}},users:{title:`Kullanıcı Yönetimi`,subtitle:`Kullanıcıları ve Bambuddy örneğinize erişimlerini yönetin`,backToSettings:`Ayarlara Dön`,createUser:`Kullanıcı Oluştur`,noPermission:`Bu sayfaya erişim izniniz yok.`,admin:`Yönetici`,noGroups:`Grup yok`,active:`Aktif`,inactive:`Pasif`,edit:`Düzenle`,delete:`Sil`,system:`Sistem`,noGroupsAvailable:`Kullanılabilir grup yok`,table:{username:`Kullanıcı Adı`,groups:`Gruplar`,status:`Durum`,actions:`İşlemler`},toast:{created:`Kullanıcı başarıyla oluşturuldu`,updated:`Kullanıcı başarıyla güncellendi`,deleted:`Kullanıcı başarıyla silindi`,fillRequired:`Lütfen tüm zorunlu alanları doldurun`,passwordsDoNotMatch:`Parolalar eşleşmiyor`,passwordTooShort:`Parola en az 6 karakter olmalı`,ldapProvisioned:`"{{username}}" LDAP kullanıcısı tedarik edildi`},modal:{createUser:`Kullanıcı Oluştur`,editUser:`Kullanıcıyı Düzenle`,cancel:`İptal`,creating:`Oluşturuluyor...`,saving:`Kaydediliyor...`,saveChanges:`Değişiklikleri Kaydet`,advancedAuthSubtitle:`Gelişmiş Kimlik Doğrulama ile`,tabsAriaLabel:`Kullanıcı kaynağı`,localTab:`Yerel`,ldapTab:`LDAP`,ldapSearchLabel:`Dizinde ara`,ldapSearchPlaceholder:`Bir kullanıcı adı, isim veya e-posta yazın...`,ldapMinChars:`Aramak için en az 2 karakter yazın`,ldapTypeToSearch:`LDAP dizininde aramak için yazmaya başlayın`,ldapSearching:`Dizinde aranıyor...`,ldapNoResults:`Dizinde eşleşen kullanıcı yok`,ldapSearchError:`Dizin araması başarısız. LDAP sunucu durumunu kontrol edin.`,ldapAlreadyProvisioned:`Zaten tedarik edildi`,ldapSelectedLabel:`Seçildi`,ldapProvision:`Kullanıcıyı tedarik et`,ldapProvisioning:`Tedarik ediliyor...`,ldapErrorProvision:`Tedarik başarısız. LDAP sunucu durumunu kontrol edin ve tekrar deneyin.`},form:{username:`Kullanıcı Adı`,usernamePlaceholder:`Kullanıcı adını girin`,email:`E-posta`,emailPlaceholder:`kullanici@example.com`,password:`Parola`,passwordPlaceholder:`Parolayı girin`,confirmPassword:`Parolayı Onayla`,confirmPasswordPlaceholder:`Parolayı onayla`,newPasswordPlaceholder:`Yeni parolayı girin`,confirmNewPasswordPlaceholder:`Yeni parolayı onayla`,leaveBlankToKeep:`mevcut olanı korumak için boş bırakın`,groups:`Gruplar`,optional:`isteğe bağlı`,autoGeneratedPassword:`Güvenli bir parola otomatik olarak oluşturulacak ve kullanıcıya e-posta ile gönderilecek.`,passwordManagedByAdvancedAuth:`Parola Gelişmiş Kimlik Doğrulama tarafından yönetilir. Kullanıcıya e-posta yoluyla yeni bir parola göndermek için "Parolayı Sıfırla"yı kullanın.`,resetPassword:`Parolayı Sıfırla`,resettingPassword:`Parola Sıfırlanıyor...`},deleteModal:{title:`Kullanıcıyı Sil`,message:`Bu kullanıcıyı silmek istediğinizden emin misiniz? Bu işlem geri alınamaz.`,confirm:`Kullanıcıyı Sil`}},streamOverlay:{title:`Akış Bindirmesi`,invalidPrinterId:`Geçersiz yazıcı ID'si`,cameraStream:`Kamera akışı`,progress:`İlerleme`,eta:`ETA`,printerIdle:`Yazıcı boşta`,printerOffline:`Yazıcı çevrimdışı`,builder:{title:`Yayın Kaplaması`,description:`Yayın kaplaması için URL oluşturur: tam ekran kamera görüntüsünün üzerine canlı baskı bilgileri bindirilir; OBS, duvar ekranı veya herhangi bir tarayıcı kaynağı için. İstediğiniz alanları seçip URL'yi kopyalayın.`,printer:`Yazıcı`,size:`Yazı boyutu`,sizeSmall:`Küçük`,sizeMedium:`Orta`,sizeLarge:`Büyük`,fps:`Kare hızı`,fpsHint:`A1 ve P1 kameraları, hangi değeri isterseniz isteyin saniyede yaklaşık 5 karede kalır.`,token:`Yayın Kaplaması belirteci (isteğe bağlı)`,tokenHint:`Yalnızca oturum açma etkinken gerekir: OBS'nin kendi oturumu yoktur. Yukarıdan Yayın Kaplaması kapsamıyla bir tane oluşturun.`,tokenWarning:`Bu URL bir belirteç içerir: okuyabilen herkes yayını izleyebilir ve dosya adını görebilir. Erişimi kesmek için belirteci iptal edin.`,fields:`Gösterilecek alanlar`,fieldPrinter:`Yazıcı adı`,fieldFilename:`Dosya adı`,fieldStatus:`Durum`,fieldProgress:`İlerleme çubuğu`,fieldLayers:`Katman sayısı`,fieldEta:`Kalan süre ve tahmini bitiş`,fieldCamera:`Kamera görüntüsü`,chamberHint:`Hazne sıcaklığı yalnızca gerçek hazne sensörü olan modellerde görünür: P1 ve A1 anlamsız bir değer bildirdiği için orada gösterilmez.`,urlTitle:`Kaplama URL'si`,open:`Aç`,showPreview:`Önizlemeyi göster`,hidePreview:`Önizlemeyi gizle`,previewTitle:`Kaplama önizlemesi`},status:{printing:`Yazdırılıyor`,paused:`Duraklatıldı`,finished:`Tamamlandı`,failed:`Başarısız`,idle:`Boşta`,unknown:`Bilinmiyor`}},profiles:{title:`Profiller`,subtitle:`Dilimleyici ön ayarlarını ve basınç ilerleme kalibrasyonlarını yönetin`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Yerel Profiller`,kprofiles:`K-Profilleri`},orcaCloud:{connectedAs:`Bağlı kullanıcı`,connectedShort:`Orca Cloud'a bağlanıldı`,logout:`Bağlantıyı kes`,noLogoutPermission:`Bağlantıyı kesme izniniz yok`,noConnectPermission:`Orca Cloud'a bağlanma izniniz yok`,retry:`Yeniden dene`,connectButton:`Orca Cloud'a bağlan`,connect:{title:`Orca Cloud'a bağlan`,description:`Dilimleyici profillerinizi Bambuddy ile senkronize etmek için Orca Cloud hesabınıza giriş yapın.`},device:{title:`Orca Cloud'da Bambuddy'yi onayla`,instruction:`Orca Cloud'u açın ve bu kodu onaylayın. Onayladığınızda Bambuddy otomatik olarak bağlanır.`,codeLabel:`Eşleştirme kodunuz`,openButton:`Orca Cloud onay sayfasını aç`,manualHint:`Ya da {{url}} adresine gidin ve yukarıdaki kodu girin.`,waiting:`Onayınız bekleniyor…`,cancel:`İptal`},profiles:{title:`Orca Cloud profilleriniz ({{count}})`,refresh:`Yenile`,empty:`Orca Cloud hesabınızda henüz profil bulunamadı.`},toast:{disconnected:`Orca Cloud bağlantısı kesildi`},errors:{startFailed:`Orca Cloud giriş akışı başlatılamadı.`,denied:`Eşleştirme Orca Cloud'da reddedildi.`,expired:`Eşleştirme kodunun süresi doldu. Tekrar denemek için Bağlan'a tıklayın.`,pollFailed:`Onay beklenirken bağlantı kesildi. Lütfen tekrar deneyin.`}},localProfiles:{title:`Yerel Profiller`,subtitle:`OrcaSlicer'dan dilimleyici ön ayarlarını içe aktar ve yönet`,import:`Profilleri İçe Aktar`,importDesc:`.bbscfg, .bbsflmt, .orca_filament, .zip veya .json dosyalarını buraya bırakın`,importing:`İçe aktarılıyor...`,search:`Yerel ön ayarlarda ara...`,noPresets:`Henüz yerel ön ayar yok`,noSearchResults:`Aramanızla eşleşen ön ayar yok`,badge:`Yerel`,edit:`Düzenle`,delete:`Sil`,cancel:`İptal`,deleteConfirmTitle:`Ön Ayarı Sil`,deleteConfirm:`Bu ön ayarı silmek istediğinizden emin misiniz? Bu geri alınamaz.`,source:`Kaynak`,inheritsFrom:`Miras alır`,filamentType:`Tür`,vendor:`Satıcı`,compatiblePrinters:`Yazıcılar`,nozzleTemp:`Nozul Sıcaklığı`,cost:`Maliyet`,density:`Yoğunluk`,pressureAdvance:`Basınç İlerlemesi`,filament:`Filament`,process:`İşlem`,printer:`Yazıcı`,toast:{importSuccess:`{{count}} ön ayar içe aktarıldı`,importSkipped:`{{count}} ön ayar atlandı (yinelenenler)`,importError:`İçe aktarma sırasında {{count}} hata`,deleted:`Ön ayar silindi`,updated:`Ön ayar güncellendi`}},connectedAs:`Bağlı kullanıcı`,signInExpiredTitle:`Bambu Cloud oturumu sona erdi`,signInExpiredBody:`Bambu Lab kayıtlı belirteci artık kabul etmiyor. Bulut profillerini, MakerWorld içe aktarmalarını ve donanım yazılımı denetimlerini geri yüklemek için yeniden oturum açın.`,logout:`Çıkış`,noLogoutPermission:`Çıkış yapma izniniz yok`,failedToLoad:`Profiller yüklenemedi`,retry:`Yeniden dene`,time:{justNow:`Az önce`,minsAgo:`{{count}}dk önce`,hoursAgo:`{{count}}sa önce`,daysAgo:`{{count}}g önce`},toast:{loggedOut:`Çıkış yapıldı`},login:{title:`Bambu Cloud'a Bağlan`,subtitle:`Dilimleyici ön ayarlarınızı cihazlar arasında senkronize edin`,email:`E-posta`,password:`Parola`,region:`Bölge`,regionGlobal:`Global`,regionChina:`Çin`,verificationCode:`Doğrulama Kodu`,totpCode:`Doğrulayıcı Kodu`,checkEmail:`E-postanızı ({{email}}) 6 haneli kod için kontrol edin`,enterTotpHint:`Doğrulayıcı uygulamanızdan 6 haneli kodu girin`,accessToken:`Erişim Belirteci`,accessTokenHint:`Bambu Cloud erişim belirtecinizi yapıştırın. Çin bölgesi hesapları bu yolu kullanmalıdır (telefon bağımlı — e-posta girişi kullanılamaz). MakerWorld çerezlerinden belirteci nasıl alacağınız için wiki'ye bakın.`,back:`Geri`,loginButton:`Giriş`,verifyButton:`Doğrula`,setTokenButton:`Belirteç Ayarla`,useToken:`Erişim belirteci kullan`,captchaTitle:`Bambu Cloud CAPTCHA istiyor`,captchaBody:`Bambu, oturum açmayı kabul etmeden önce ağınızdan CAPTCHA doğrulaması istiyor ve bu doğrulama Bambuddy üzerinden yanıtlanamaz. Sorun e-postanız veya parolanız değil. Engel genel IP adresinize bağlıdır ve genellikle birkaç saat içinde kendiliğinden kalkar; sürekli yeniden denemek süreyi uzatır. Şimdi oturum açmak için tarayıcı oturumundan alınan bir erişim belirteci kullanın.`,useEmail:`E-posta ile giriş yap`,toast:{loggedIn:`Başarıyla giriş yapıldı`,codeSent:`Doğrulama kodu e-postanıza gönderildi`,enterTotp:`Doğrulayıcı uygulamanızdan kod girin`,tokenSet:`Belirteç başarıyla ayarlandı`}},presets:{myPreset:`Ön ayarım (düzenlenebilir)`,duplicate:`Çoğalt`,editable:`Düzenlenebilir`,failedToLoadDetails:`Ön ayar ayrıntıları yüklenemedi`,deleteConfirm:`Bu ön ayar silinsin mi?`,deleteWarning:`Bu, "{{name}}" ön ayarını Bambu Cloud'dan kalıcı olarak silecek. Bu geri alınamaz.`,noDuplicatePermission:`Ön ayarları çoğaltma izniniz yok`,noEditPermission:`Ön ayarları düzenleme izniniz yok`,noDeletePermission:`Ön ayarları silme izniniz yok`,types:{filament:`Filament ön ayarı`,printer:`Yazıcı ön ayarı`,process:`İşlem ön ayarı`},toast:{deleted:`Ön ayar silindi`,created:`Ön ayar oluşturuldu`,updated:`Ön ayar güncellendi`,duplicated:`Ön ayar çoğaltıldı`,fieldAdded:`"{{key}}" alanı eklendi`,exported:`Ön ayar dışa aktarıldı`},baseLabel:`Taban: {{name}}`,currentLabel:`Mevcut: {{name}}`,newPreset:`Yeni Ön Ayar`,editPreset:`Ön Ayarı Düzenle`,duplicatePreset:`Ön Ayarı Çoğalt`,createNewPreset:`Yeni Ön Ayar Oluştur`,customizeSettings:`Yeni ön ayarınız için ayarları özelleştirin`,compareWithBase:`Taban ön ayarla karşılaştır`,compare:`Karşılaştır`,basePreset:`Taban Ön Ayar`,selectBasePreset:`Taban ön ayar seç...`,presetName:`Ön Ayar Adı`,myCustomPreset:`Özel ön ayarım`,inheritsFrom:`Miras alır`,dropJsonToImport:`İçe aktarmak için JSON bırakın`,tabs:{common:`Ortak`,allFields:`Tüm Alanlar`},availableFields:`Kullanılabilir Alanlar`,searchFieldsPlaceholder:`Alanlarda ara...`,noMatchingFields:`Eşleşen alan yok`,allFieldsAdded:`Tüm alanlar eklendi`,addCustomField:`Özel alan ekle`,yourOverrides:`Geçersiz Kılmalarınız`,noOverridesYet:`Henüz geçersiz kılma yok`,clickFieldsToAdd:`Eklemek için soldaki alanlara tıklayın`,saveAsTemplate:`Şablon olarak kaydet`,jsonTip:`İpucu: Ayarları içe aktarmak için bu modalin herhangi bir yerine .json dosyasını sürükleyip bırakın`},cloudView:{searchPlaceholder:`Ön ayarlarda ara...`,templates:`Şablonlar`,refresh:`Yenile`,newPreset:`Yeni Ön Ayar`,clearFilters:`Filtreleri temizle`,compareMode:`Karşılaştırma Modu`,selectAnotherPreset:`Başka bir {{type}} ön ayarı seç`,clickTwoPresets:`Karşılaştırmak için aynı türden iki ön ayara tıklayın`,selectFirst:`1. İlkini seç`,selectSecond:`2. İkincisini seç`,compareNow:`Şimdi Karşılaştır`,lastSynced:`Son senkronizasyon:`,showingCount:`{{total}} ön ayardan {{showing}} tanesi gösteriliyor`,noPresetsFound:`Ön ayar bulunamadı`,columns:{filament:`Filament`,process:`İşlem`,printer:`Yazıcı`},noFilamentPresets:`Filament ön ayarı yok`,noProcessPresets:`İşlem ön ayarı yok`,noPrinterPresets:`Yazıcı ön ayarı yok`,filters:{type:`Tür`,owner:`Sahip`,printer:`Yazıcı`,nozzle:`Nozul`,filament:`Filament`,layer:`Katman`,all:`Tümü`,myPresets:`Ön Ayarlarım`,builtIn:`Yerleşik`,process:`İşlem`},noTemplatesPermission:`Şablonları yönetme izniniz yok`,noRefreshPermission:`Profilleri yenileme izniniz yok`,noCreatePermission:`Ön ayar oluşturma izniniz yok`},templates:{title:`Hızlı Şablonlar`,noTemplates:`Henüz şablon yok`,createFirst:`Ön ayar düzenleyicisinden şablonlar oluşturun`,typeFilter:`Tür:`,deleteTitle:`Şablonu Sil`,deleteWarning:`Bu işlem geri alınamaz`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz?`,namePlaceholder:`Şablon adı`,descriptionPlaceholder:`Açıklama`,settingsJson:`Ayarlar (JSON)`,fieldsCount:`{{count}} alan`,shownInModals:`Modallerde gösterilir`,hiddenInModals:`Modallerde gizli`,apply:`Uygula`,toast:{deleted:`Şablon silindi`,updated:`Şablon güncellendi`,created:`Şablon oluşturuldu`,applied:`Şablon uygulandı`}}},support:{debugLoggingActive:`Hata ayıklama kaydı aktif`,manageLogs:`Yönet`,collectItem7:`Yazıcı bağlantısı ve firmware sürümleri`,collectItem8:`Entegrasyon durumu (Spoolman, MQTT, HA)`,collectItem9:`Ağ arayüzleri (yalnızca alt ağlar)`,collectItem10:`Python paket sürümleri`,collectItem11:`Veritabanı sağlık kontrolleri`,collectItem12:`Docker ortam ayrıntıları`,bundleGenerating:`Paket oluşturuluyor...`,bundleStepConnection:`Yazıcı bağlantı kontrolleri çalıştırılıyor`,bundleStepVirtualPrinters:`Sanal yazıcı kurulum kontrolleri çalıştırılıyor`,bundleStepLogScan:`Son günlüklerde bilinen sorunlar taranıyor`,bundleStepBuild:`Destek paketi ZIP oluşturuluyor`},fileManager:{variants:{badge:`{{count}} sürüm`,groupAction:`Sürüm olarak grupla`,groupTooltip:`Bu dosyaları farklı yazıcılar için dilimlenmiş aynı iş olarak işaretle`,grouped:`{{count}} dosya sürüm olarak gruplandı`,printAlternatives:`Yazdır ({{count}} alternatif)`},title:`Dosya Yöneticisi`,subtitle:`Baskı dosyalarınızı organize edin ve yönetin`,uploadFiles:`Dosya Yükle`,newFolder:`Yeni Klasör`,folderName:`Klasör Adı`,folderNamePlaceholder:`örn., Fonksiyonel Parçalar`,renameFile:`Dosyayı Yeniden Adlandır`,renameFolder:`Klasörü Yeniden Adlandır`,invalidFilenameChar:`Baskı dosya adlarında "{{char}}" karakterine izin verilmiyor. Yazıcının SD kartı şu karakterleri reddeder: < > : " / \\ | ? *`,moveFiles:`{{count}} Dosyayı Taşı`,rootNoFolder:`Kök (Klasör Yok)`,current:`mevcut`,linkFolder:`Klasörü Bağla`,linkFolderDescription:`Hızlı erişim için "{{name}}" klasörünü bir projeye veya arşive bağla.`,project:`Proje`,archive:`Arşiv`,noProjectsFound:`Proje bulunamadı`,noArchivesFound:`Arşiv bulunamadı`,unlink:`Bağlantıyı Kaldır`,link:`Bağla`,dragDropFiles:`Dosyaları buraya sürükleyip bırakın`,dropFilesHere:`Dosyaları buraya bırakın`,releaseToUpload:`Yüklemek için bırakın`,orClickToBrowse:`veya göz atmak için tıklayın`,allFileTypesSupported:`Tüm dosya türleri desteklenir. ZIP dosyaları çıkarılacak.`,zipFilesDetected:`ZIP dosyaları algılandı`,zipExtractOptions:`ZIP dosyaları çıkarılacak. Klasör yapısını nasıl yöneteceğinizi seçin:`,preserveZipStructure:`ZIP'ten klasör yapısını koru`,createFolderFromZip:`ZIP dosya adından klasör oluştur`,stlThumbnailGeneration:`STL küçük resim oluşturma`,zipMayContainStl:`ZIP dosyaları STL dosyaları içerebilir. Küçük resimler çıkarma sırasında oluşturulabilir.`,thumbnailsCanBeGenerated:`STL dosyaları için küçük resimler oluşturulabilir. Büyük modellerin işlenmesi daha uzun sürebilir.`,generateThumbnailsForStl:`STL dosyaları için küçük resim oluştur`,threemfDetected:`3MF dosyaları algılandı`,threemfExtractionInfo:`Yazıcı modeli, malzeme, renk ve baskı ayarları 3MF dosyalarından otomatik olarak çıkarılacak.`,willBeExtracted:`Çıkarılacak`,filesExtracted:`{{count}} dosya çıkarıldı`,uploadComplete:`Yükleme tamamlandı: {{succeeded}} başarılı`,uploadFailed:`Yükleme başarısız`,zipFilesFailed:`{{count}} dosya başarısız`,uploading:`Yükleniyor...`,changeLink:`Bağlantıyı Değiştir...`,linkTo:`Şuna bağla...`,linkToProjectOrArchive:`Projeye veya arşive bağla`,generateThumbnail:`Küçük Resim Oluştur`,generateThumbnails:`Küçük Resimler Oluştur`,generateThumbnailsForMissing:`Eksik olan STL dosyaları için küçük resimler oluştur`,gridView:`Izgara görünümü`,listView:`Liste görünümü`,lowDiskSpaceWarning:`Düşük disk alanı uyarısı`,lowDiskSpaceDetails:`Toplam {{total}} alandan yalnızca {{free}} boş. Eşik ayarlarda {{threshold}} GB olarak ayarlanmış.`,files:`Dosyalar`,folders:`Klasörler`,size:`Boyut`,free:`Boş`,allFiles:`Tüm Dosyalar`,allExternal:`Harici`,externalIsEmpty:`Harici dosya yok`,externalEmptyDescription:`Bağlı harici klasörlerinizdeki dosyalar burada görünecek.`,wrap:`Sar`,enableTextWrapping:`Metin sarmayı etkinleştir`,disableTextWrapping:`Metin sarmayı devre dışı bırak`,collapse:`Daralt`,collapseFoldersByDefault:`Klasörleri varsayılan olarak daralt`,expandFoldersByDefault:`Klasörleri varsayılan olarak genişlet`,folderSort:`Klasörleri sırala`,folderSortByName:`Ada göre`,folderSortByActivity:`Son etkinliğe göre`,dragToResizeTooltip:`Yeniden boyutlandırmak için sürükleyin, sıfırlamak için çift tıklayın`,searchFiles:`Dosyalarda ara...`,searchSubfoldersHint:`Alt klasörler dahil`,readme:{truncated:`Kısaltıldı`,show:`README’yi göster`,hide:`README’yi gizle`,label:`README`},tags:{title:`Etiketler`,subtitle:`Çapraz filtreleme için dosyaları etiketleyin — oyuncak, çocuklar için güvenli, sadece PETG, ne isterseniz.`,manage:`Etiketler`,manageTitle:`Etiket kataloğunu yönet`,add:`Yeni etiket`,edit:`Etiketi yeniden adlandır`,name:`Ad`,fileCount:`Dosya`,empty:`Henüz etiket yok. Bir tane oluşturup dosyaları etiketlemeye başlayın.`,noMatches:`Eşleşen etiket yok.`,createPlaceholder:`örn. oyuncak, çocuk-güvenli, petg`,createButton:`Oluştur`,nameRequired:`Ad gerekli.`,searchPlaceholder:`Etiketleri filtrele...`,created:`Etiket oluşturuldu.`,updated:`Etiket yeniden adlandırıldı.`,deleted:`Etiket kaldırıldı.`,saveFailed:`Etiket kaydedilemedi.`,deleteFailed:`Etiket kaldırılamadı.`,applyFailed:`Etiketler uygulanamadı.`,applyAdd:`Etiket ekle`,applyRemove:`Etiket kaldır`,applyAddSuccess:`{{files}} dosyaya {{count}} etiket eklendi.`,applyRemoveSuccess:`{{files}} dosyadan {{count}} etiket kaldırıldı.`,actionAdd:`Seçili dosyalara ekle`,actionRemove:`Seçili dosyalardan kaldır`,tagAction:`Etiketle`,bulkTitle:`Seçili {{count}} dosyayı etiketle`,bulkTooltip:`Seçili her dosyaya etiket ekleyin veya kaldırın.`,noPermission:`Dosyaları etiketleme izniniz yok.`,filterLabel:`Filtre:`,clearAll:`Tümünü temizle`,confirmDelete:`"{{name}}" etiketi silinsin mi?`,confirmDeleteMessage:`Bu, etiketi katalogdan kaldırır. Dosyalar diğer etiketlerini korur.`,confirmDeleteInUseMessage:`Bu etiket {{count}} dosyada bulunuyor. Silmek hepsinden çıkarır; dosyaların kendisine dokunulmaz.`,editAria:`{{name}} düzenle`,deleteAria:`{{name}} sil`},allTypes:`Tüm türler`,prints:`Baskılar`,ascending:`Artan`,descending:`Azalan`,showModified:`Değiştirme tarihlerini göster`,hideModified:`Değiştirme tarihlerini gizle`,lastModified:`Son değiştirme`,lastActivity:`Son etkinlik`,resultsCount:`{{total}} dosyadan {{showing}} tanesi`,selectAll:`Tümünü Seç`,deselectAll:`Seçimi Kaldır`,selected:`{{count}} seçildi`,adding:`Ekleniyor...`,loadingFiles:`Dosyalar yükleniyor...`,folderIsEmpty:`Klasör boş`,noFilesYet:`Henüz dosya yok`,folderEmptyDescription:`Başlamak için bu klasöre dosya yükleyin veya dosyaları taşıyın.`,noFilesDescription:`Baskıyla ilgili dosyalarınızı organize etmeye başlamak için dosya yükleyin.`,noMatchingFiles:`Eşleşen dosya yok`,noMatchingFilesDescription:`Mevcut arama veya filtre kriterlerinizle eşleşen dosya yok.`,clearFilters:`Filtreleri temizle`,printedCount:`{{count}}x yazdırıldı`,uploadedBy:`Yükleyen`,deleteFolder:`Klasörü Sil`,deleteFile:`Dosyayı Sil`,deleteFilesCount:`{{count}} Dosya Sil`,deleteFolderConfirm:`Bu klasörü silmek istediğinizden emin misiniz? İçindeki tüm dosyalar da silinecek.`,deleteFileConfirm:`Bu dosyayı silmek istediğinizden emin misiniz?`,deleteFilesConfirm:`{{count}} seçili dosyayı silmek istediğinizden emin misiniz? Bu işlem geri alınamaz.`,deleting:`Siliniyor...`,noPermissionRenameFolder:`Klasörleri yeniden adlandırma izniniz yok`,noPermissionLinkFolder:`Klasörleri bağlama izniniz yok`,noPermissionDeleteFolder:`Klasörleri silme izniniz yok`,onlyEmptyFoldersDeletable:`Yalnızca boş klasörleri silebilirsiniz`,noPermissionPrint:`Yazdırma izniniz yok`,noPermissionAddToQueue:`Kuyruğa ekleme izniniz yok`,noPermissionSlice:`Dosyaları dilimleme izniniz yok`,noPermissionDownload:`Dosyaları indirme izniniz yok`,noPermissionPreview:`Dosyaları önizleme izniniz yok`,preview3d:`3B Önizleme`,noPermissionRenameFile:`Bu dosyayı yeniden adlandırma izniniz yok`,noPermissionGenerateThumbnail:`Küçük resim oluşturma izniniz yok`,noPermissionDeleteFile:`Bu dosyayı silme izniniz yok`,noPermissionCreateFolder:`Klasör oluşturma izniniz yok`,noPermissionUpload:`Dosya yükleme izniniz yok`,noPermissionMoveFiles:`Dosyaları taşıma izniniz yok`,noPermissionDeleteFiles:`Dosyaları silme izniniz yok`,linkExternal:`Harici Bağla`,linkExternalFolder:`Harici Klasör Bağla`,linkExternalFolderDescription:`Bir ana bilgisayar dizinini (NAS, USB, ağ paylaşımı) Dosya Yöneticisine bağla. Dosyalar kopyalanmaz — orijinal yoldan doğrudan erişilir.`,externalFolderNamePlaceholder:`örn., NAS Baskıları`,externalPath:`Ana Bilgisayar Yolu`,externalPathHelp:`Docker ana bilgisayarındaki dizinin mutlak yolu. Konteynere bind-mount edilmiş olmalıdır.`,readOnly:`Salt Okunur`,readOnlyHelp:`yüklemeleri ve silmeleri engeller`,showHiddenFiles:`Gizli dosyaları göster (nokta dosyaları)`,externalFolder:`Harici Klasör`,scanFolder:`Tara`,toast:{folderCreated:`Klasör oluşturuldu`,openInSlicerFailed:`Dilimleyicide açılamadı`,folderDeleted:`Klasör silindi`,fileDeleted:`Dosya silindi`,filesDeleted:`{{count}} dosya silindi`,filesMoved:`Dosyalar taşındı`,folderLinked:`Klasör bağlandı`,folderUnlinked:`Klasör bağlantısı kaldırıldı`,externalFolderLinked:`Harici klasör bağlandı ve tarandı`,folderScanned:`Tarama tamamlandı: {{added}} eklendi, {{removed}} kaldırıldı`,addedToQueue:`Kuyruğa {{count}} dosya eklendi`,addedToQueuePartial:`{{added}} dosya eklendi, {{failed}} başarısız`,failedToAddToQueue:`Dosyalar eklenemedi: {{error}}`,fileRenamed:`Dosya yeniden adlandırıldı`,folderRenamed:`Klasör yeniden adlandırıldı`,thumbnailsGenerated:`{{count}} küçük resim oluşturuldu`,thumbnailsGeneratedPartial:`{{succeeded}} küçük resim oluşturuldu, {{failed}} başarısız`,noStlMissingThumbnails:`Küçük resmi eksik STL dosyası yok`,failedToGenerateThumbnails:`Küçük resimler oluşturulamadı: {{error}}`,thumbnailGenerated:`Küçük resim oluşturuldu`,failedToGenerateThumbnail:`Küçük resim oluşturulamadı: {{error}}`}},projects:{parentLabel:`Üst proje`,parentNone:`Yok (üst düzey proje)`,parentHint:`Bu projeyi başka bir projenin altına yerleştirin, böylece rakamları ana projede toplanır`,partOf:`{{name}} projesinin parçası`,subProjectCount:`{{count}} alt proje`,subProjectsOf:`{{name}} alt projeleri`,collapseSubProjects:`Alt projeleri daralt`,expandSubProjects:`Alt projeleri genişlet`,title:`Projeler`,subtitle:`3D baskı projelerinizi organize edin ve takip edin`,newProject:`Yeni Proje`,editProject:`Projeyi Düzenle`,deleteProject:`Projeyi Sil`,projectName:`Proje Adı`,description:`Açıklama`,noProjects:`Henüz proje yok`,noProjectsFiltered:`{{status}} proje yok`,noProjectsFilteredHelp:`Hiç {{status}} projeniz yok. Projeler durumları değiştiğinde burada görünecek.`,createFirst:`İlgili baskıları organize etmeye, ilerlemeyi takip etmeye ve yapımlarınızı yönetmeye başlamak için ilk projenizi oluşturun.`,createFirstButton:`İlk Projenizi Oluşturun`,create:`Oluştur`,files:`Dosyalar`,prints:`Baskılar`,plates:`plaka`,parts:`parça`,lastModified:`Son Değiştirme`,deleteConfirm:`Bu projeyi silmek istediğinizden emin misiniz? Arşivler ve kuyruk öğelerinin bağlantısı kaldırılacak ancak silinmeyecek.`,addFiles:`Dosya Ekle`,removeFile:`Dosyayı Kaldır`,viewDetails:`Detayları Görüntüle`,namePlaceholder:`örn., Voron 2.4 Yapımı`,descriptionPlaceholder:`İsteğe bağlı açıklama...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URL http:// veya https:// ile başlamalı`,openExternalUrl:`Proje URL'sini aç`,coverImageLabel:`Kapak fotoğrafı`,coverImageAlt:`Proje kapak fotoğrafı`,coverImageUpload:`Yükle`,coverImageReplace:`Değiştir`,coverImageRemove:`Kaldır`,color:`Renk`,targetPlates:`Hedef Plakalar`,targetPlatesPlaceholder:`örn., 25`,targetPlatesHelp:`Baskı işi sayısı`,targetParts:`Hedef Parçalar`,targetPartsPlaceholder:`örn., 150`,targetPartsHelp:`Gereken toplam nesne`,targetSets:`Dosya başına kopya`,targetSetsPlaceholder:`örn. 10`,targetSetsHelp:`Her yazdırılabilir dosyanın kaç kez yazdırılacağı`,tagsLabel:`Etiketler (virgülle ayrılmış)`,tagsPlaceholder:`örn., voron, fonksiyonel, hediye`,dueDate:`Son Tarih`,priority:`Öncelik`,priorityLow:`Düşük`,priorityNormal:`Normal`,priorityHigh:`Yüksek`,priorityUrgent:`Acil`,statusActive:`Aktif`,statusCompleted:`Tamamlandı`,statusArchived:`Arşivlendi`,done:`Tamamlandı`,completed:`tamamlandı`,failed:`başarısız`,inQueue:`kuyrukta`,noPrintsYet:`Henüz baskı yok`,printJobs:`Baskı işleri (plakalar)`,partsPrinted:`Yazdırılan parçalar`,failedParts:`Başarısız parçalar`,import:`İçe Aktar`,export:`Dışa Aktar`,importProject:`Projeyi içe aktar`,exportAll:`Tüm projeleri dışa aktar`,loading:`Projeler yükleniyor...`,noEditPermission:`Projeleri düzenleme izniniz yok`,noDeletePermission:`Projeleri silme izniniz yok`,noCreatePermission:`Proje oluşturma izniniz yok`,noImportPermission:`Projeleri içe aktarma izniniz yok`,noExportPermission:`Projeleri dışa aktarma izniniz yok`,toast:{created:`Proje oluşturuldu`,updated:`Proje güncellendi`,deleted:`Proje silindi`,imported:`Proje içe aktarıldı`,multipleImported:`{{count}} proje içe aktarıldı`,importFailed:`İçe aktarma başarısız`,exported:`Projeler dışa aktarıldı (yalnızca meta veriler)`}},projectDetail:{notFound:`Proje bulunamadı`,backToProjects:`Projelere Dön`,export:`Dışa Aktar`,exportProject:`Projeyi dışa aktar`,noExportPermission:`Projeleri dışa aktarma izniniz yok`,noEditPermission:`Projeleri düzenleme izniniz yok`,partOf:`Şunun parçası:`,priorityLabel:`Öncelik:`,noPrints:`Bu projede henüz baskı yok`,status:{active:`Aktif`,completed:`Tamamlandı`,archived:`Arşivlendi`},priority:{low:`Düşük`,normal:`Normal`,high:`Yüksek`,urgent:`Acil`},dueDate:{overdue:`Gecikmiş`,today:`Bugün teslim`,daysLeft:`{{count}} gün kaldı`},progress:{platesProgress:`Plaka İlerlemesi`,partsProgress:`Parça İlerlemesi`,setsProgress:`Tamamlanan setler`,sets:`set`,setsHint:`Her yazdırılabilir dosya bu sayıya ulaştığında bir set tamamlanır`,printJobs:`baskı işi`,parts:`parça`,percentComplete:`%{{percent}} tamamlandı`,remaining:`{{count}} kaldı`},stats:{printJobs:`Baskı İşleri`,total:`toplam`,failed:`{{count}} başarısız`,partsPrinted:`{{count}} parça yazdırıldı`,printTime:`Baskı Süresi`,filamentUsed:`Kullanılan Filament`},cost:{title:`Maliyet Takibi`,filamentCost:`Filament Maliyeti`,energy:`Enerji`,totalCost:`Toplam Maliyet`,total:`Toplam`,includesBom:`BOM dahil`,budget:`Bütçe`,remaining:`Kalan`},subProjects:{title:`Alt projeler ({{count}})`,jobs:`{{count}} iş`},rollup:{title:`{{count}} alt proje dahil`,progress:`Genel ilerleme`,percentComplete:`%{{percent}} tamamlandı`},notes:{title:`Notlar`,noEditPermission:`Notları düzenleme izniniz yok`,placeholder:`Bu proje hakkında notlar ekleyin...`,empty:`Henüz not yok. Not eklemek için Düzenle'ye tıklayın.`},files:{title:`Dosyalar`,linkFolders:`Dosya Yöneticisinden klasörleri bağla`,forQuickAccess:`hızlı erişim için bu projeye.`,fileCount:`{{count}} dosya`,empty:`Bağlı klasör yok. Dosya Yöneticisine gidin ve bu projeye bir klasör bağlayın.`,printedCount:`{{count}} kez yazdırıldı`,progressTooltip:`{{target}} yazdırmadan {{done}} tanesi tamamlandı`,noFiles:`Bu klasörde dosya yok.`},bom:{title:`Malzeme Listesi`,acquired:`{{completed}}/{{total}} edinildi`,showAll:`Tümünü göster`,hideDone:`Tamamlananları gizle`,addPart:`Parça Ekle`,noAddPermission:`Parça ekleme izniniz yok`,partNamePlaceholder:`Parça adı (örn., M3x8 vidalar)`,partName:`Parça adı`,qty:`Adet`,price:`Fiyat ({{currency}})`,sourcingUrlPlaceholder:`Kaynak URL'si (isteğe bağlı)`,remarksPlaceholder:`Notlar (isteğe bağlı)`,deletePart:`Parçayı Sil`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz?`,noUpdatePermission:`Parçaları güncelleme izniniz yok`,noEditPermission:`Parçaları düzenleme izniniz yok`,noDeletePermission:`Parçaları silme izniniz yok`,totalCost:`Toplam maliyet:`,empty:`Malzeme listesinde parça yok. Nelerin tedarik edilmesi gerektiğini takip etmek için donanım, elektronik veya diğer bileşenler ekleyin.`},timeline:{title:`Etkinlik Zaman Çizelgesi`,empty:`Henüz etkinlik yok.`},template:{saveAsTemplate:`Şablon Olarak Kaydet`,noCreatePermission:`Şablon oluşturma izniniz yok`},queue:{title:`Kuyruk`,viewAll:`Tümünü görüntüle`,printing:`{{count}} yazdırılıyor`,queued:`{{count}} kuyrukta`},prints:{title:`Baskılar ({{count}})`},toast:{projectUpdated:`Proje güncellendi`,partAdded:`Parça eklendi`,partRemoved:`Parça kaldırıldı`,exportFailed:`Dışa aktarma başarısız`,projectExported:`Proje dışa aktarıldı`,templateCreated:`Şablon oluşturuldu`}},system:{title:`Sistem Bilgisi`,version:`Sürüm`,uptime:`Çalışma Süresi`,cpuUsage:`CPU Kullanımı`,memoryUsage:`Bellek Kullanımı`,diskUsage:`Disk Kullanımı`,networkInfo:`Ağ Bilgisi`,logs:`Günlükler`,debugMode:`Hata Ayıklama Modu`,enableDebug:`Hata Ayıklama Kaydını Etkinleştir`,disableDebug:`Hata Ayıklama Kaydını Devre Dışı Bırak`,downloadLogs:`Günlükleri İndir`,clearLogs:`Günlükleri Temizle`,dockerInfo:`Docker Bilgisi`,containerName:`Konteyner Adı`,imageName:`İmaj Adı`,platform:`Platform`,architecture:`Mimari`},sponsors:{sectionTitle:`Bağımsız ve topluluk destekli`,tagline:`Bambuddy ücretsizdir ve böyle kalır çünkü insanlar onu desteklemeyi seçer. VC yok, bulut bağımlılığı yok.`,viewSupporters:`Destekçileri görüntüle`,toastPrints:`Bambuddy ile {{count}} baskı tamamladın. Bambuddy, destekçileri sayesinde ücretsiz kalıyor.`,toastCost:`Bambuddy ile {{total}} kadar filament takip ettin. Projeyi bağımsız tutanları gör.`,toastArchives:`{{count}} baskı Bambuddy ile arşivlendi. Bağımsız kalmasını sağlayanları gör.`,toastAnniversary:`Bambuddy ile bir yılı doldurdun! Projeyi bağımsız tutanları gör.`,toastVersionUpdate:`v{{version}} sürümüne güncellendi. Bambuddy, destekçileri sayesinde ücretsiz kalıyor.`,toastBusiness:`Bambuddy'yi {{count}} yazıcıda mı çalıştırıyorsunuz? Ekipler için bir destek planı var: öncelikli düzeltmeler, faturalandırma ve geliştiriciye doğrudan erişim.`,businessCta:`Kurumsal Bambuddy`,businessTitle:`Kurumsal Bambuddy`,businessTagline:`{{count}} yazıcı çalıştırıyorsunuz. Ekipler ve baskı çiftlikleri için öncelikli destek, ticari lisanslama ve faturalandırma mevcut.`},library:{title:`Filament Kütüphanesi`,addFilament:`Filament Ekle`,editFilament:`Filamenti Düzenle`,deleteFilament:`Filamenti Sil`,vendor:`Satıcı`,material:`Malzeme`,color:`Renk`,kFactor:`K Faktörü`,temperature:`Sıcaklık`,noFilaments:`Kütüphanede filament yok`,deleteConfirm:`Bu filamenti silmek istediğinizden emin misiniz?`,importFromPrinter:`Yazıcıdan İçe Aktar`,exportToFile:`Dosyaya Dışa Aktar`,runWithPipeline:{actionLabel:`Pipeline ile çalıştır`,noPermission:`Pipeline çalıştırma izniniz yok`,modalTitle:`Pipeline ile çalıştır`,confirmTitle:`Çalıştırmayı onayla`,confirmIntro:`Ön kontrol bu çalıştırmayla ilgili sorunlar buldu`,sourceHint:`Kaynak`,pipelineHint:`Pipeline`,targetHint:`Hedef`,pipelineListAria:`Kullanılabilir pipeline'lar`,runAnyway:`Yine de çalıştır`,loading:`Yükleniyor…`,empty:`Henüz kayıtlı pipeline yok. Dilimleme diyalogunu açın ve oluşturmak için "Pipeline olarak kaydet"e tıklayın.`,noTarget:`Hedef yazıcı belirlenmemiş`,noTargetMessage:`Bu pipeline'ın hedef yazıcısı yok. Birini seçmek için Ayarlar'da açın.`,copies:`Kopyalar`,copiesHint:`maks {{n}}`,classTarget:`Herhangi {{model}}`,toast:{started:`Pipeline çalıştırması başladı`,failed:`Çalıştırma başlatılamadı`},issue:{printerNotSet:`Bu pipeline'da hedef yazıcı belirlenmemiş.`,printerNotFound:`Hedef yazıcı artık mevcut değil.`,printerDisabled:`Hedef yazıcı devre dışı.`,printerOffline:`Hedef yazıcı çevrimdışı.`,filamentType:`Filament yuvası {{slot}}: beklenen {{expected}}, AMS'de {{actual}}`,filamentColor:`Filament yuvası {{slot}}: renk farklı (beklenen {{expected}}, AMS'de {{actual}})`,amsSlotMissing:`AMS yuvası {{slot}} bu yazıcıda yok`,filamentUnverified:`Filament yuvası {{slot}} bulut / standart ön ayardan geldiği için statik olarak doğrulanamadı.`,noClassMatches:`Bu kurulumda pipeline'ın hedef model sınıfıyla ({{expected}}) eşleşen yazıcı yok.`,classNotSet:`Pipeline hedefi yazıcı sınıfı olarak ayarlanmış ancak model seçilmemiş.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Dilimleyici varsayılanları gösteriliyor: dilimleyici sidecar bu özellikten eski olduğu için bir ön ayarın değerlerini bildiremiyor. Görmek için sidecar imajını güncelleyin. Değiştirmediğiniz her şey yine ön ayarı kullanır.`,presetValuesNotConfigured:`Dilimleyici varsayılanları gösteriliyor: yapılandırılmış bir sidecar olmadığı için ön ayarın değerleri okunamıyor. Değiştirmediğiniz her şey yine ön ayarı kullanır.`,presetValuesSidecarUnavailable:`Dilimleyici varsayılanları gösteriliyor: sidecar yanıt vermediği için ön ayarın değerleri okunamıyor. Değiştirmediğiniz her şey yine ön ayarı kullanır.`,presetValuesUnavailable:`Dilimleyici varsayılanları gösteriliyor: seçilen ön ayarın kendi değerleri okunamadı. Değiştirmediğiniz her şey yine ön ayarı kullanır.`,filamentDefault:`Varsayılan`,fromFile:`dosyadan`,fromFileHint:`Tasarımcı bunu kaynak dosyada değiştirdi. Değeri {{value}}.`,fromFilePrinterCoupled:`tasarımcının yazıcısı`,fromFilePrinterCoupledHint:`Bu dosyanın tasarlandığı yazıcıya göre ayarlanmıştır; sizinkinde yanlış veya aralık dışı olabilir.`,fromFileOverridesPreset:`profili geçersiz kılar`,fromFileOverridesPresetHint:`Dosya bunu {{value}} olarak ayarlıyor, seçtiğiniz profil ise {{preset}} kullanıyor. Yalnızca dosya öncelikli olacaksa işaretleyin.`,useFromFile:`{{option}} için kaynak dosyadaki değeri kullan`,otherFromFile:`Bu dosyadaki diğer ayarlar`,fromFileSummary:`Tasarımcı bu dosyada {{count}} işlem ayarını değiştirmiş. Yalnızca işaretlediklerin kullanılır.`,fromFileUseAll:`Tasarımcının ayarlarını kullan`,fromFileUseAllHint:`Başka yazıcılara taşınabilen ayarları işaretler. Tasarımcının kendi yazıcısına göre ayarlananlar ve seçtiğin ön ayarı tanımlayanlar kapalı kalır.`,fromFileClear:`{{count}} ayarı temizle`,loading:`Dilimleyici ayarları yükleniyor…`,mode:{simple:`Basit`,advanced:`Gelişmiş`,expert:`Uzman`},searchPlaceholder:`Ayarlarda ara`,resetAll:`{{count}} ayarı sıfırla`,resetOption:`Varsayılana sıfırla`,noMatches:`Bu aramayla eşleşen ayar yok.`},slice:{filamentSlotUnset:`ayarlanmadı`,processSettingsEmbedded:`“Dosyanın yerleşik ayarlarını kullan” açıkken kullanılmaz — bu dilimlemeyi dosyanın kendi ayarları yönetir.`,processSettingsInactive:`Etkin değil`,presetsHidden:`{{count}} gizli`,showAllPresets:`Tümünü göster`,showFewerPresets:`Daha az göster`,processSettings:`İşlem ayarları`,processSettingsHint:`Seçilen ön ayarı bu dilimleme için düzenleyin. Dokunmadığınız her şey ön ayardaki gibi kalır.`,processSettingsChanged:`{{count}} değişti`,processSettingsUnchanged:`Ön ayar varsayılanları`,title:`Modeli dilimle`,action:`Dilimle`,actionAll:`Tüm {{count}} plakayı dilimle`,actionAllTitle:`Her plakayı tek bir çok plakalı çıktıya dilimle (tek arşiv). Filament seçimi projenin tanımladığı her yuvayı kapsar.`,allPlatesToggle:`Tüm {{count}} plakayı dilimle`,slicing:`Dilimleniyor…`,printer:`Yazıcı profili`,process:`İşlem profili`,filament:`Filament profili`,filamentSlot:`Filament {{index}} ({{type}})`,filamentColour:`Filament rengi`,selectPreset:`— Bir ön ayar seçin —`,loadingPresets:`Ön ayarlar yükleniyor…`,analyzingPlateFilaments:`Plaka filamentleri analiz ediliyor…`,analyzingPlateFilamentsHint:`Bu plakanın hangi AMS yuvalarını kullandığını keşfetmek için bir önizleme dilimleme çalıştırılıyor. Sonradan önbelleğe alınır — yeniden açma anlıktır.`,previewToast:`{{name}} analiz ediliyor — {{elapsed}}`,previewWithProgress:`{{name}} analiz ediliyor — {{stage}} (%{{percent}}) — {{elapsed}}`,notUsedByPlate:`— bu plaka tarafından kullanılmıyor`,noPresetsForSlot:`Kullanılabilir ön ayar yok`,otherPrinters:`Diğer yazıcılar`,presetsLoadFailed:`Ön ayarlar yüklenemedi. Önce içe aktarmak için Ayarlar → Profiller'i açın.`,refreshPresets:`Yenile`,refreshPresetsTitle:`Ön ayarları yenile — en güncel bulut ve paketli listeleri getir (Bambu Studio veya Bambu Handy'de bir ön ayar sildikten sonra kullanın)`,allPresetsRequired:`Tüm ön ayarlar seçilmelidir`,useEmbedded:`Dosyanın yerleşik ayarlarını kullan`,useEmbeddedHint:`Yukarıdaki profiller yerine tasarımcının ayarladığı gibi (duvarlar, dolgu, filament) dilimle. Yazıcınız dosyayla eşleştiği için sunuluyor.`,autoOrient:`Nesneleri otomatik yönlendir`,autoOrientHint:`Dilimleyici, dilimlemeden önce her nesneyi en iyi basılan yüzüne çevirir. Dosyada kayıtlı yönlendirmenin yerini alır.`,autoArrange:`Tablaya otomatik yerleştir`,autoArrangeHint:`Dilimleyici nesneleri üst üste binmeyecek şekilde yerleştirir. Dosyadaki yerleşimin yerini alır.`,enqueuing:`Dilimleme işi gönderiliyor…`,queued:`Kuyrukta…`,failed:`Dilimleme başarısız. Dilimleyici yardımcı bileşen günlüklerini kontrol edin.`,startedToast:`{{name}} arka planda dilimleniyor…`,queuedToast:`Kuyrukta: {{name}} — {{elapsed}}`,runningToast:`{{name}} dilimleniyor — {{elapsed}}`,runningWithProgress:`{{name}} — {{stage}} (%{{percent}}) — {{elapsed}}`,runningWithProgressMultiPlate:`{{plateCount}}/{{plateIndex}} plaka • {{name}} — {{stage}} (%{{percent}}) — {{elapsed}}`,completedToast:`{{name}} dilimlendi`,externalWriteFallbackToast:`Dahili kitaplığa kaydedildi: harici klasöre yazılamadı`,failedTitle:`Dilimleme başarısız`,failedToast:`{{name}} dilimleme başarısız: {{detail}}`,tier:{local:`İçe aktarılmış`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Standart`},cloud:{notAuthenticated:`Bulut ön ayarlarınızı görmek için Bambu Cloud'a giriş yapın (Ayarlar → Profiller → Bambu Cloud).`,expired:`Bambu Cloud oturumu süresi doldu — bulut ön ayarlarınızı yenilemek için tekrar giriş yapın.`,unreachable:`Bambu Cloud şu anda erişilemez. Yerel ve standart ön ayarlar hâlâ çalışıyor.`},orcaCloud:{notAuthenticated:`Orca ön ayarlarınızı görmek için Orca Cloud'a giriş yapın (Profiller → Orca Cloud).`,expired:`Orca Cloud oturumu sona erdi — Orca ön ayarlarınızı yenilemek için tekrar giriş yapın.`,unreachable:`Orca Cloud şu anda erişilemez. Diğer ön ayarlar çalışmaya devam ediyor.`},bedType:{label:`Baskı plakası`,auto:`Otomatik (işlem ön ayarı kullan)`,coolPlate:`Soğuk Plaka`,coolPlateSuperTack:`Soğuk Plaka SuperTack`,engineering:`Mühendislik Plakası`,highTemp:`Yüksek Sıcaklık Plakası`,texturedPEI:`Dokulu PEI Plakası`,smoothPEI:`Düz PEI Plakası`},pipelines:{label:`Pipeline`,applyAria:`Pipeline uygula`,applyPrompt:`Pipeline uygula…`,empty:`Kayıtlı pipeline yok`,saveButton:`Pipeline olarak kaydet`,saveTitle:`Dört slotluk mevcut seçimi yeniden kullanılabilir pipeline olarak kaydet`,namePlaceholder:`Pipeline adı`,nameAria:`Yeni pipeline adı`,toast:{applied:`"{{name}}" uygulandı`,saved:`Pipeline kaydedildi`,saveFailed:`Kaydetme başarısız`}}},spoolman:{title:`Spoolman Entegrasyonu`,enabled:`Spoolman Etkin`,url:`Spoolman URL`,connected:`Bağlı`,disconnected:`Bağlı Değil`,testConnection:`Bağlantıyı Test Et`,sync:`Senkronize Et`,syncing:`Senkronize ediliyor...`,lastSync:`Son Senkronizasyon`,linkToSpoolman:`Spoolman'a Bağla`,openInSpoolman:`Spoolman'da Aç`,unlinkSpool:`Makara Bağlantısını Kaldır`,unlinkConfirmTitle:`Makara Atamasını Kaldır?`,unlinkConfirmMessage:`Bu, makarayı bu yuvadan kaldıracak. Makara verisinin kendisi değişmeyecek.`,selectSpool:`Makara Seç`,noUnlinkedSpools:`Atanmamış makara yok`,linkSuccess:`Makara başarıyla atandı`,linkFailed:`Makara atanamadı`,unlinkSuccess:`Makara ataması başarıyla kaldırıldı`,unlinkFailed:`Makara ataması kaldırılamadı`,linkedSpool:`Atanan makara`,spoolId:`Makara ID`,fillSourceLabel:`(Spoolman)`,weight:`Ağırlık`,remaining:`Kalan`,disableWeightSync:`AMS Tahmini Ağırlık Senkronizasyonunu Devre Dışı Bırak`,disableWeightSyncDesc:`AMS tahminlerinden kalan kapasiteyi güncelleme. AMS yüzde tabanlı tahminler yerine Spoolman'ın kullanım takibini tercih ediyorsanız bunu kullanın. Yeni makaralar yine de başlangıç ağırlığı olarak AMS tahminini kullanacak.`,reportPartialUsage:`Başarısız Baskılar için Kısmi Kullanımı Bildir`,reportPartialUsageDesc:`Bir baskı başarısız olduğunda veya iptal edildiğinde, katman ilerlemesine göre o noktaya kadar kullanılan tahmini filamenti bildir.`},locations:{title:`Depolama Konumları`,subtitle:`Makaralarınız için raf, çekmece ve diğer fiziksel depolama yerlerini yönetin`,add:`Konum Ekle`,addShort:`Ekle`,edit:`Konumu Düzenle`,name:`Ad`,spools:`Makaralar`,sensors:`Sensörler`,empty:`Henüz depolama konumu yok. İlk rafınızı veya çekmecenizi oluşturun.`,manage:`Konumlar`,createPlaceholder:`örn. Raf A, Çekmece 1`,nameRequired:`Konum adı zorunludur`,created:`Konum oluşturuldu`,updated:`Konum güncellendi`,deleted:`Konum silindi`,saveFailed:`Konum kaydedilemedi`,deleteFailed:`Konum silinemedi`,deleteBlocked:`Silmeden önce bu konumdaki tüm makaraları taşıyın`,confirmDelete:`"{{name}}" silinsin mi?`,confirmDeleteMessage:`Bu konum kataloğdan kaldırılacak. Önce makaralar taşınmalıdır.`,confirmDeleteMessageWithSensors:`Bu konum kataloğdan kaldırılacak. Önce makaralar taşınmalıdır. Bağlı sensörler de silinecek.`},inventory:{title:`Makara Envanteri`,subtitle:`Makaralarınızı yönetin`,addToInventory:`Envantere Ekle`,addToInventoryPending:`Ekleniyor...`,addToInventorySuccess:`Makara envantere eklendi`,addToInventoryFailed:`Makara envantere eklenemedi`,unknownSpoolTitle:`Yeni filament algılandı`,unknownSpoolMessage:`{{location}} konumunda bilinmeyen RFID etiketli bir makara algılandı. Şimdi envantere eklensin mi?`,unknownSpoolSlot:`Yuva`,bulk:{selectAllVisible:`Görünenleri seç`,selectRow:`Satırı seç`,selectGroup:`Grubu seç`,selectionCount:`{{count}} seçildi`,edit:`Düzenle`,printLabels:`Etiket yazdır`,resetUsage:`Kullanımı sıfırla`,restore:`Geri yükle`,archive:`Arşivle`,delete:`Sil`,clearSelection:`Seçimi temizle`,editTitle:`Makaraları toplu düzenle`,editSubtitle:`Seçilen {{count}} makaraya uygulanır. Yalnızca işaretlediğiniz alanlar güncellenir.`,editHint:`Bir alana yazmak onu güncelleme için işaretler — yalnızca işaretli satırlar gönderilir. Boş bırakılan alanlar makaraları değiştirmez (alanları boşaltmak yalnızca makara bazında yapılabilir).`,useCustom:`"{{value}}" kullan`,toggleField:`Bu alanın güncellenmesini değiştir`,changeCount:`{{count}} alan güncellenecek.`,applyPending:`Uygulanıyor...`,applyButton:`{{count}} makaraya uygula`,deleteTitle:`Seçili makaraları sil`,archiveTitle:`Seçili makaraları arşivle`,restoreTitle:`Seçili makaraları geri yükle`,resetUsageTitle:`Seçili makaraların kullanımını sıfırla`,deleteMessage:`{{count}} makara kalıcı olarak silinsin mi? Bu işlem geri alınamaz.`,archiveMessage:`{{count}} makara arşivlensin mi? Daha sonra geri yüklenebilir.`,restoreMessage:`{{count}} arşivlenmiş makara geri yüklensin mi?`,resetUsageMessage:`{{count}} makaranın "Toplam Tüketim" sayacı sıfırlansın mı? Kalan ağırlık korunur.`,updateSuccess:`{{count}} makara güncellendi`,updateFailed:`Toplu güncelleme başarısız`,updatePartial:`{{ok}} makara güncellendi, {{failed}} başarısız`,updateAllFailed:`{{count}} güncellemenin tümü başarısız oldu — yeniden denemek için seçim korundu`,deleteSuccess:`{{count}} makara silindi`,deleteFailed:`Toplu silme başarısız`,deletePartial:`{{ok}} makara silindi, {{failed}} başarısız`,deleteAllFailed:`{{count}} silmenin tümü başarısız oldu — yeniden denemek için seçim korundu`,archiveSuccess:`{{count}} makara arşivlendi`,archiveFailed:`Toplu arşivleme başarısız`,archivePartial:`{{ok}} makara arşivlendi, {{failed}} başarısız`,archiveAllFailed:`{{count}} arşivlemenin tümü başarısız oldu — yeniden denemek için seçim korundu`,restoreSuccess:`{{count}} makara geri yüklendi`,restoreFailed:`Toplu geri yükleme başarısız`,restorePartial:`{{ok}} makara geri yüklendi, {{failed}} başarısız`,restoreAllFailed:`{{count}} geri yüklemenin tümü başarısız oldu — yeniden denemek için seçim korundu`,invalidHex:`6 hex karakter (RRGGBB) veya 8 (RRGGBBAA) girin. Aksi takdirde alan uygulanmaz.`},spoolmanMixedContentTitle:`Spoolman HTTPS üzerinden yüklenemiyor — tarayıcınız tarafından karışık içerik engellendi`,spoolmanMixedContentBody:`Bambuddy HTTPS üzerinden sunuluyor (ters proxy'niz aracılığıyla), ancak Spoolman URL'niz hâlâ düz HTTP. Tarayıcılar güvenlik için karışık içeriği engeller, bu nedenle gömülü Spoolman arayüzü oluşturulamaz. Bunun çalışması için Spoolman'in HTTPS üzerinden erişilebilir olması gerekiyor.`,spoolmanMixedContentFixReverseProxy:`Spoolman'i Bambuddy ile aynı ters proxy'nin (Traefik / Nginx / Caddy) arkasına HTTPS ile koyun, ardından Ayarlardaki Spoolman URL'sini yeni HTTPS adresine güncelleyin.`,spoolmanMixedContentFixOpenNewTab:`Geçici bir çözüm olarak, Spoolman'i HTTP üzerinden yeni bir tarayıcı sekmesinde açın — karışık içerik kuralları yalnızca gömülü çerçevelere uygulanır, bu nedenle bağımsız bir sekme yine çalışır.`,spoolmanOpenInNewTab:`Spoolman'i yeni sekmede aç`,labels:{title:`Makara etiketleri yazdır`,selectedCount:`{{count}} seçildi`,pickSpools:`Hangi makaralar için etiket yazdırılacağını seçin:`,monochrome:`Tek renk (siyah beyaz yazıcı)`,monochromeHint:`Renk örneğini kaldırır ve metni genişletir`,startingPosition:`Başlangıç etiket konumu`,startingPositionRange:`Yalnızca sayfa şablonları: L7160 için 1–21; 5160 için 1–30.`,startingPositionInvalid:`1 ile {{capacity}} arasında bir tam sayı girin.`,startingPositionFirst:`Yazdırma 1. konumdan başlar.`,startingPositionSkipped:`İlk sayfada 1 ile {{lastPosition}} arasındaki konumlar boş bırakılır.`,startingPositionRangeError:`Bu sayfanın başlangıç konumu 1 ile {{capacity}} arasında olmalıdır.`,searchPlaceholder:`Ad, marka veya #ID ara`,filterByMaterial:`Malzeme:`,allMaterials:`Tümü`,selectVisible:`Görünen tümünü seç ({{count}})`,deselectVisible:`Görünenleri seçimden kaldır`,clearAll:`Tümünü temizle`,noSpoolsToShow:`Gösterilecek makara yok. Filtrenizi ayarlayın ve tekrar deneyin.`,noMatches:`Mevcut arama veya filtreyle eşleşen makara yok.`,printOne:`Bu makara için etiket yazdır`,printLabels:`Etiketleri yazdır…`,bulkTitle:`Şu anda gösterilen {{count}} makaradan etiket yazdırılacak olanları seçin`,noSpoolsTitle:`Etiketlenecek makara yok`,error:`Etiketler oluşturulamadı: {{msg}}`,sortBy:{label:`Sırala:`,id:`ID'ye göre`,color:`Renge göre`},templates:{amsHolderSmall:{label:`AMS tutucu — küçük (74 × 33 mm)`,hint:`Sayfa başına tek etiket; MakerWorld model 752566 (AMS Filament Etiket Tutucu) yazdırılabilir etiketle eşleşir.`},amsHolderLarge:{label:`AMS tutucu — büyük (75 × 55 mm)`,hint:`Sayfa başına tek etiket; AMS Filament Etiket Tutucu'nun karton uçlu varyantına uyar. Numune, marka, malzeme, ID ve QR kod için yeterli yer.`},box40x30:{label:`Kutu etiketi (40 × 30 mm)`,hint:`Sayfa başına tek etiket; yaygın DK/Brother rulo boyutu, filament torbası ve depolama kutusu etiketleri için iyi.`},box:{label:`Kutu etiketi (62 × 29 mm)`,hint:`Sayfa başına tek etiket; Brother PT/QL ve Dymo küçük etiketleri için boyutlandırılmış.`},averyL7160:{label:`Avery L7160 — A4 sayfa (38.1 × 63.5 mm × 21)`,hint:`AB sayfa stoğu; A4 sayfa başına 21 etiket.`},avery5160:{label:`Avery 5160 — US Letter sayfa (25.4 × 66.7 mm × 30)`,hint:`ABD sayfa stoğu; Letter sayfası başına 30 etiket.`}}},csv:{importButton:`CSV İçe Aktar`,exportButton:`CSV Dışa Aktar`,modalTitle:`CSV'den makara içe aktar`,selectFile:`Bir CSV dosyası seçin veya buraya sürükleyin`,dragHint:`Başlık: material (zorunlu), brand, subtype, color_name, rgba, …`,parsing:`Dosya okunuyor…`,previewError:`CSV dosyası okunamadı`,validCount:`{{count}} geçerli`,errorCount:`{{count}} hatalı`,skippedCount:`{{count}} atlandı`,colRow:`Satır`,colStatus:`Durum`,colColor:`Renk`,colorResolved:`Renk katalogdan dolduruldu`,colorCrossMaterial:`Renk farklı bir malzemeden alındı — katalogda tam eşleşme yok`,duplicateExisting:`Bu malzeme, marka ve renkte bir makara zaten var — yine de yeni makara olarak içe aktarılacak`,spoolmanHint:`Spoolman modunda Spoolman'ın yerleşik CSV içe/dışa aktarımını kullanın.`,importValidRows:`{{count}} geçerli satırı içe aktar`,noValidRows:`Geçerli satır yok`,importing:`İçe aktarılıyor…`,importSuccess:`{{count}} makara içe aktarıldı`,importError:`İçe aktarma başarısız`,exportError:`Dışa aktarma başarısız`},addSpool:`Makara Ekle`,editSpool:`Makarayı Düzenle`,copySpool:`Makarayı Kopyala`,material:`Malzeme`,selectMaterial:`Malzeme seç...`,subtype:`Alt tür`,brand:`Marka`,searchBrand:`Marka ara...`,useCustomBrand:`"{{brand}}" kullan`,useCustomMaterial:`Özel malzeme kullan: {{material}}`,suggestedOptions:`Önerilen`,allOptions:`Tümü`,colorName:`Renk Adı`,colorNamePlaceholder:`Yeşim Beyazı, Ateş Kırmızısı...`,color:`Renk`,hexColor:`Hex Renk`,pickColor:`Özel renk seç`,labelWeight:`Etiket Ağırlığı`,coreWeight:`Boş Makara Ağırlığı`,searchSpoolWeight:`Makara ağırlığı ara...`,weightUsed:`Kullanılan`,currentWeight:`Kalan Ağırlık`,measuredWeight:`Ölçülen Ağırlık`,spoolName:`Makara`,costPerKg:`kg başına maliyet`,storageLocation:`Depolama Konumu`,temperature:`Sıcaklık`,humidity:`Nem`,battery:`Pil`,storageLocationPlaceholder:`örn. Raf A, Çekmece 1`,openInInventory:`Envanterde Aç`,measuredWeightError:`Ölçülen ağırlık {{min}}g ile {{max}}g arasında olmalı.`,slicerFilament:`Dilimleyici Filamenti`,slicerFilamentName:`Dilimleyici Ön Ayar Adı`,slicerPreset:`Dilimleyici Ön Ayarı`,searchPresets:`Filament ön ayarlarında ara...`,selectedPreset:`Seçildi`,noPresetsFound:`Ön ayar bulunamadı`,tempOverrides:`Sıcaklık Geçersiz Kılmaları`,note:`Not`,notePlaceholder:`Bu makara hakkında ek notlar...`,category:`Kategori`,categoryPlaceholder:`örn. Üretim, Prototip, Müşteri A`,categoryNone:`Kategorisiz`,storageLocationNone:`Konum ayarlanmamış`,lowStockThresholdOverride:`Düşük stok eşiği (bu makara)`,lowStockThresholdOverrideHelp:`Global eşiği kullanmak için boş bırakın (%{{global}}).`,clearRfid:`RFID Etiketini Temizle`,rfidCleared:`RFID etiketi temizlendi`,archive:`Arşivle`,restore:`Geri Yükle`,noSpools:`Henüz makara yok. Başlamak için ilk makaranızı ekleyin.`,noAvailableSpools:`Kullanılabilir makara yok. Envanterinize bir makara ekleyin veya önce başka bir yuvadan atamayı kaldırın.`,kProfiles:`K-Profilleri`,addKProfile:`K-Profili Ekle`,assignSpool:`Makara Ata`,unassignSpool:`Atamayı Kaldır`,assignSuccess:`Makara atandı ve AMS yuvası yapılandırıldı`,assignPendingInsert:`Atandı. Makarayı yerleştirdiğinizde yuva yapılandırılacak.`,assignFailed:`Makara atanamadı`,selectSpool:`Bu yuvaya atamak için bir makara seçin`,assigned:`Atandı`,assigning:`Atanıyor...`,searchSpools:`Makaralarda ara...`,showAllSpools:`Tüm makaraları göster`,spoolmanSpools:`Spoolman Makaraları`,allMaterials:`Tüm Malzemeler`,filterByBrand:`Markaya göre filtrele...`,showArchived:`Arşivlenmişleri göster`,quickAdd:`Hızlı Ekle (Stok)`,quantity:`Miktar`,stock:`Stok`,configured:`Yapılandırıldı`,spoolsCreated:`{{count}} makara oluşturuldu`,spoolsPartiallyCreated:`{{total}} makaradan {{created}} tanesi oluşturuldu (bazıları başarısız)`,spoolCreated:`Makara oluşturuldu`,spoolUpdated:`Makara güncellendi`,spoolDeleted:`Makara silindi`,deepLinkSpoolNotFound:`Makara bulunamadı`,deepLinkFetchFailed:`Makara yüklenemedi — tekrar deneyin`,spoolArchived:`Makara arşivlendi`,spoolRestored:`Makara geri yüklendi`,kProfileSaveFailed:`K-profili ayarları kaydedilemedi`,syncWeightSpoolNotFound:`Makara bulunamadı — silinmiş olabilir`,syncWeightSpoolmanUnreachable:`Spoolman'a erişilemiyor — daha sonra tekrar deneyin`,syncWeightFailed:`Ağırlık senkronize edilemedi`,spoolmanUnreachable:`Spoolman erişilebilir değil — lütfen daha sonra tekrar deneyin`,deleteSpoolNotFound:`Makara bulunamadı — zaten silinmiş olabilir`,deleteFailed:`Makara silinemedi`,archiveSpoolNotFound:`Makara bulunamadı — zaten silinmiş olabilir`,archiveFailed:`Makara arşivlenemedi`,restoreSpoolNotFound:`Makara bulunamadı — zaten silinmiş olabilir`,restoreFailed:`Makara geri yüklenemedi`,saveFailed:`Değişiklikler kaydedilemedi`,tagClearFailed:`Etiket temizlenemedi`,deleteConfirm:`Bu makarayı silmek istediğinizden emin misiniz? Bu geri alınamaz.`,archiveConfirm:`Bu makarayı arşivlemek istediğinizden emin misiniz?`,advancedSettings:`Gelişmiş Ayarlar`,filamentInfoTab:`Filament Bilgisi`,paProfileTab:`PA Profili`,colorAndCostTab:`Renk ve maliyet`,printersTab:`Yazıcılar`,filamentInfo:`Filament`,additional:`Ek`,loadingPresets:`Bulut ön ayarları yükleniyor...`,cloudConnected:`Bulut bağlı`,cloudNotConnected:`Bulut bağlı değil (varsayılanlar kullanılıyor)`,recentColors:`Son Kullanılan`,searchColors:`Renklerde ara...`,searchResults:`Arama sonuçları`,allColors:`Tüm renkler`,commonColors:`Yaygın renkler`,showLess:`Daha az göster`,showAll:`Tümünü göster`,noColorsFound:`Aramanızla eşleşen renk yok`,noResults:`Eşleşme bulunamadı`,extraColorsLabel:`Ekstra renkler`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Virgülle ayrılmış 2 ile 8 arası hex durağı yapıştırın. Bir gradyan olarak görüntülenir.`,extraColorsInvalid:`Geçersiz hex yok sayıldı: {{tokens}}`,colorEffectLabel:`Efekt`,colorEffect:{none:`Yok`,sparkle:`Parıltı`,wood:`Ahşap`,marble:`Mermer`,glow:`Parlama`,matte:`Mat`,silk:`İpek`,galaxy:`Galaksi`,rainbow:`Gökkuşağı`,metal:`Metal`,translucent:`Yarı saydam`,gradient:`Gradyan`,dualColor:`Çift Renk`,triColor:`Üç Renk`,multicolor:`Çok Renkli`},selectMaterialFirst:`Lütfen önce Filament Bilgisi sekmesinde bir malzeme seçin.`,noPrintersConfigured:`Yapılandırılmış yazıcı yok. PA profillerini kullanmak için yazıcı ekleyin.`,matchingFilter:`Eşleşen`,anyBrand:`Herhangi marka`,anyVariant:`Herhangi varyant`,autoSelect:`Otomatik seç`,matches:`eşleşme`,match:`eşleşme`,noMatches:`Eşleşme yok`,connected:`Bağlı`,offline:`Çevrimdışı`,printerOffline:`Yazıcı çevrimdışı. Kalibrasyon profillerini görüntülemek için bağlanın.`,noKProfilesMatch:`Seçilen filamentle eşleşen K-profili yok.`,leftNozzle:`Sol Nozul`,rightNozzle:`Sağ Nozul`,profilesSelected:`kalibrasyon profili seçildi`,filamentPreset:`Filament ön ayarı`,presetUseSpoolDefault:`Makaranın ön ayarını kullan`,presetInherited:`devralındı`,presetOverride:`geçersiz kılındı`,presetNeedsModel:`Bu yazıcı modelini henüz bildirmedi, bu yüzden kendi ön ayarı olamaz.`,autoMatchPresets:`Otomatik eşleştir`,autoMatchPresetsHint:`Makara ön ayarının her modeli adıyla anan çeşidini bul`,kProfilesPerPrinter:`K profilleri`,kProfileNotSet:`Ayarlanmadı`,kProfileFlowMismatch:`Bu profil {{profile}} nozul ile ölçüldü ancak takılı nozul {{fitted}}, bu yüzden uygulanmayacak`,nozzle:`Nozul`,unknownModel:`Bilinmeyen model`,onePrinter:`1 yazıcı`,nPrinters:`{{n}} yazıcı`,filamentPresetsLoadFailed:`Bu makaranın modele özel ön ayarları yüklenemedi`,filamentPresetSaveFailed:`Modele özel ön ayarlar kaydedilemedi`,totalInventory:`Toplam Envanter`,totalConsumed:`Toplam Tüketim`,byMaterial:`Malzemeye Göre`,inPrinter:`Yazıcıda`,lowStock:`Düşük Stok`,sinceTracking:`Takip başladığından beri`,resetConsumedCounter:`Sayacı sıfırla`,resetConsumedCounterTooltip:`Bu makara için tüketilen gram sayacını sıfırla. Kalan ağırlık değişmez.`,resetConsumedCounterConfirm:`Bu makaranın tüketilen gram sayacı 0'a sıfırlansın mı? Gelecekteki baskılar sıfırdan tekrar takip edilecek. Makaranın kendisi, kalan ağırlık hesaplaması ve ayarlarınız değiştirilmez.`,resetAllConsumedCounters:`Tüm sayaçları sıfırla`,resetAllConsumedCountersTooltip:`Her makarada tüketilen gram sayacını sıfırla. Kalan ağırlıklar değişmez.`,resetAllConsumedCountersConfirm:`Tüm {{count}} makaradaki (arşivlenmişler dahil) tüketilen gram sayacı 0'a sıfırlansın mı? Bu, "Toplam Tüketim" istatistiğini temizler, böylece gelecekteki baskılar sıfırdan takip edilir. Makaralar ve kalan ağırlıklar değiştirilmez.`,consumedCounterReset:`Sayaç sıfırlandı`,allConsumedCountersReset:`{{count}} makaranın sayacı sıfırlandı`,resetConsumedCounterFailed:`Sayaç sıfırlanamadı`,loadedInAms:`AMS/Ext'te Yüklü`,remaining:`Kalan`,weightCheck:`Ağırlık Kontrolü`,lastWeighed:`Son tartım`,neverWeighed:`Hiç tartılmadı`,search:`Makaralarda ara...`,showing:`Gösterilen`,to:`-`,of:`/`,show:`Göster`,spools:`makara`,spool:`makara`,page:`Sayfa`,noSpoolsMatch:`Sonuç bulunamadı`,noSpoolsMatchDesc:`Aradığınızı bulmak için aramanızı veya filtrelerinizi ayarlamayı deneyin.`,active:`Aktif`,archived:`Arşivlendi`,all:`Tümü`,used:`Kullanılmış`,new:`Yeni`,clearFilters:`Filtreleri temizle`,table:`Tablo`,cards:`Kartlar`,net:`Net`,groupSimilar:`Grupla`,groupedSpools:`{{count}} aynı makara`,groupedRows:`satır`,columns:`Sütunlar`,configureColumns:`Sütunları Yapılandır`,configureColumnsDesc:`Sütunları yeniden sıralamak için sürükleyin veya okları kullanın. Göz simgesiyle görünürlüğü değiştirin.`,visible:`görünür`,reset:`Sıfırla`,cancel:`İptal`,applyChanges:`Değişiklikleri Uygula`,moveUp:`Yukarı taşı`,moveDown:`Aşağı taşı`,hideColumn:`Sütunu gizle`,showColumn:`Sütunu göster`,linkToSpool:`Makaraya Bağla`,tagLinked:`Etiket makaraya bağlandı`,tagLinkFailed:`Etiket bağlanamadı`,tagAlreadyLinked:`Etiket zaten #{{id}} numaralı makaraya bağlı`,unknownTag:`Bilinmeyen RFID etiketi algılandı`,usageHistory:`Kullanım Geçmişi`,noUsageHistory:`Henüz kullanım kaydedilmedi`,printName:`Baskı Adı`,weightConsumed:`Tüketilen Ağırlık`,clearHistory:`Temizle`,historyCleared:`Kullanım geçmişi temizlendi`,fillSourceLabel:`(Env)`,lowStockThresholdError:`Eşik 0.1 ile 99.9 arasında olmalı`,assignMismatchTitle:`Malzeme uyumsuzluğu`,assignMismatchMessage:`Seçilen makara malzemesi "{{spoolMaterial}}", {{location}} için tepsi malzemesi "{{trayMaterial}}" ile eşleşmiyor. Yine de atansın mı?`,assignMismatchConfirm:`Yine de Ata`,assignPartialMismatchMessage:`Makara malzemesi "{{spoolMaterial}}", {{location}} konumundaki "{{trayMaterial}}" ile benzer ancak tam olarak eşleşmiyor. Devam etmek istiyor musunuz?`,assignProfileMismatchMessage:`Makara profili "{{spoolProfile}}", {{location}} konumundaki tepsi profili "{{trayProfile}}" ile eşleşmiyor. Devam etmek istiyor musunuz?`,assignReconfigureNote:`AMS yuvası, makaranın profilini kullanacak şekilde yeniden yapılandırılacak.`,spoolmanFilamentCatalog:`Spoolman Filament Kataloğu`,pickFromSpoolmanCatalog:`Spoolman kataloğundan seç…`,spoolmanFilamentSelected:`Filament Spoolman kataloğundan seçildi`,spoolmanFilamentUnlinked:`Filament katalog bağlantısı temizlendi`,noSpoolmanFilaments:`Spoolman kataloğunda filament bulunamadı`,spoolmanFilamentColorSwatch:`Filament rengi`,spoolWeightManagedBySpoolman:`Boş makara ağırlığı Spoolman'de filament türü başına yönetilir`,spoolmanCatalogLoadFailed:`Spoolman filament kataloğu yüklenemedi`},timelapse:{title:`Zaman Atlamalı Video`,create:`Zaman Atlamalı Video Oluştur`,download:`İndir`,delete:`Sil`,preview:`Önizleme`,frameRate:`Kare Hızı`,quality:`Kalite`,processing:`İşleniyor...`,noTimelapses:`Kullanılabilir zaman atlamalı video yok`},ams:{title:`AMS`,slot:`Yuva`,empty:`Boş`,emptySlot:`Boş yuva`,slotEmpty:`Boş`,slotUnconfigured:`?`,emptySlotReset:`Atanmış filament yok`,unknown:`Bilinmiyor`,humidity:`Nem`,temperature:`Sıcaklık`,filamentType:`Filament Türü`,filamentColor:`Renk`,remaining:`Kalan`,history:`AMS Geçmişi`,noHistory:`Geçmiş mevcut değil`,configureSlot:`Yuvayı Yapılandır`,externalSpool:`Harici Makara`,profile:`Profil`,kFactor:`K Faktörü`,kFactorShort:`K`,fill:`Doldur`,configure:`Yapılandır`,used:`kullanılan`,remainingUnit:`kalan`},printModal:{variants:{editNote:`Bu alternatifler iş kuyruğa alınırken belirlendi. Değiştirmek için iptal edip yeniden kuyruğa alın.`,title:`Yazıcı alternatifleri`,help:`Tek iş, tek kuyruk yeri. Uygun olan ilk boşalan yazıcı kendi dosyasını yazdırır.`,unknownModel:`Bilinmeyen model`,plateFor:`{{filename}} için tabla`,moveUp:`Yukarı taşı`,moveDown:`Aşağı taşı`,queued:`{{count}} alternatifle kuyruğa alındı`},selectPrinter:`Yazıcı Seç`,selectPlate:`Plaka Seç`,filamentMapping:`Filament Eşlemesi`,useArchiveMapping:`Eşleme`,useArchiveMappingTooltip:`Tür/renge göre eşleştirmek yerine, bu arşivle kaydedilen AMS eşlemesindeki (dilimleyiciden) her yuvayı seç.`,clickToChangeSlot:`Yuva atamasını değiştirmek için tıklayın`,reRead:`Yeniden oku`,plateN:`Plaka {{n}}`,plateFilamentsUnreadable:`Seçili bir plakanın filamentleri okunamadı, bu yüzden eşleştirilemiyor. Diğerlerini kuyruğa almak için o plakanın seçimini kaldırın.`,totalCost:`Toplam maliyet:`,slotRemainingShort:` - {{grams}}g kaldı`,printSettings:`Baskı Ayarları`,bedLeveling:`Tabla Seviyelendirme`,flowCalibration:`Akış Kalibrasyonu`,vibrationCalibration:`Titreşim Kalibrasyonu`,layerInspection:`İlk Katman Denetimi`,timelapse:`Zaman Atlamalı Video`,cancel:`İptal`,noPrintersAvailable:`Kullanılabilir yazıcı yok`,printerBusy:`Yazıcı meşgul`,printerOffline:`Yazıcı çevrimdışı`,sameTypeDifferentColor:`Aynı tür, farklı renk`,filamentTypeNotLoaded:`Filament türü yüklenmedi`,statusReady:`Hazır`,statusColorMismatch:`Renk uyuşmuyor`,statusTypeNotFound:`Tür bulunamadı`,requiredTooltip:`Gereken: {{name}} - {{color}}`,manuallySelected:`Elle seçildi`,autoMatched:`Otomatik eşleşti`,selectSlot:`Yuva seç`,exactColorMatch:`Tam renk eşleşmesi`,slotForFilament:`{{name}} için yazıcı yuvası`,overrideForFilament:`{{name}} için filament geçersiz kılma`,sameTypeDifferentColorDetail:`Aynı tür, farklı renk: {{required}} gerekiyor, yuvada {{loaded}} var`,requiredTypeNotInPrinter:`Gereken filament türü yazıcıda bulunamadı.`,whenToPrint:`Ne zaman yazdırılsın`,asap:`En kısa sürede`,queue:`Kuyruk`,schedule:`Zamanla`,dateTime:`Tarih ve saat`,invalidDateTime:`Lütfen geçerli bir tarih ve saat girin`,openCalendar:`Takvimi aç`,requireManualStart:`Manuel başlatma gerektir`,requirePreviousSuccess:`Yalnızca önceki baskı başarılıysa başlat`,autoOffAfter:`Bittiğinde yazıcıyı kapat`,helpAsap:`Baskı kuyruğun en üstüne eklenir ve uygun bir yazıcı boştaysa başlar.`,helpSchedule:`Yazıcı boşta ise baskı zamanlanan saatte başlar. Meşgulse yazıcı uygun olana kadar bekler.`,helpQueue:`Baskı kuyruğun sonuna eklenir.`,leftNozzle:`S`,rightNozzle:`R`,leftNozzleTooltip:`Sol nozul`,rightNozzleTooltip:`Sağ nozul`,ftsSameInletHint:`Bu baskıdaki tüm filamentler Filament Hattı Değiştirici IN-{{inlet}} girişinde. Aynı girişteki filamentler arasında geçiş daha yavaştır — birini diğer girişteki bir AMS'e taşıyın.`,rackPosition:`Rack konumu`,rackPositionTooltip:`Bu filamenti rack üzerindeki hangi nozulun basacağı. Konumlar yazıcıdaki gibi numaralandırılmıştır.`,rackEmptyPosition:`Bu rack konumu boş`,rackWrongNozzle:`{{has}} nozul takılı; bu filament {{needs}} gerektiriyor`,filamentOverride:`Filament Geçersiz Kılma`,filamentOverrideHint:`Model tabanlı atama için isteğe bağlı olarak filamentleri geçersiz kıl. Planlayıcı, orijinal 3MF değerleri yerine seçtiğiniz filamentlere göre eşleşecek.`,originalFilament:`Orijinal`,overrideWith:`Şununla geçersiz kıl`,resetToOriginal:`Orijinale sıfırla`,insufficientFilamentTitle:`Yeterli filament yok`,waitingForAmsStatus:`{{printer}} için AMS durumu bekleniyor…`,insufficientFilamentMessage:`Bazı atanmış makaralarda bu baskının ihtiyaç duyduğundan daha az filament kaldı:`,insufficientFilamentLine:`{{printer}} - {{slot}}: {{required}}g gerekli, {{remaining}}g kaldı`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: {{required}}g gerekli, eşleşen makaralarda toplam {{remaining}}g (AMS Filament Backup)`,printAnyway:`Yine de yazdır`,forceColorMatch:`Renk eşleşmesini zorla`,staggerPrinterStarts:`Yazıcı başlangıçlarını kademelendir`,staggerGroupSize:`Grup boyutu`,staggerInterval:`Aralık (dk)`,staggerPreview:`{{printers}} yazıcı → {{size}} kişilik {{groups}} grup, her {{interval}} dk'da bir başlatılıyor`,staggerLastGroup:`son grup: {{count}}`,staggerTotal:`toplam: {{minutes}} dk`,staggerToPrinters:`{{count}} yazıcıya kademelendir`,gcodeInjection:`Otomatik baskı G-kodu enjekte et`,insufficientBudget:`Yetersiz bütçe`,unlimitedNoBudget:`Sınırsız – bütçe limiti belirlenmemiş.`,noPrintableCostCenters:`Yazdırma için kullanılabilir etkin bir masraf merkezi yok. Bir yöneticiden yazdırma erişimi vermesini isteyin.`},backup:{includesEncryptionKey:`Yerel yedekler, yedek ZIP'nin kendi içinde tamamlanmış olması için MFA şifreleme anahtarı dosyasını (DATA_DIR/.mfa_encryption_key) içerir. ZIP'yi hassas olarak değerlendirin — dosyaya sahip olan herkes içinde saklanan OIDC istemci gizli anahtarlarını ve TOTP gizli anahtarlarını çözebilir.`,title:`Yedekleme ve Geri Yükleme`,createBackup:`Yedek Oluştur`,restoreBackup:`Yedeği Geri Yükle`,restoreDescription:`Tüm verileri bir yedek dosyasından değiştir`,downloadBackup:`Yedeği İndir`,uploadBackup:`Yedek Yükle`,lastBackup:`Son Yedek`,autoBackup:`Otomatik Yedekleme`,backupNow:`Şimdi Yedekle`,restoreWarning:`Uyarı: Bir yedeği geri yüklemek tüm mevcut verilerin üzerine yazacak.`,includeArchives:`Arşivleri Dahil Et`,includeSettings:`Ayarları Dahil Et`,includeProfiles:`Profilleri Dahil Et`,backupSuccess:`Yedek başarıyla oluşturuldu`,restoreSuccess:`Yedek başarıyla geri yüklendi`,backupFailed:`Yedekleme başarısız`,restoreFailed:`Geri yükleme başarısız`,restoreNote:`Geri yükleme sırasında Sanal Yazıcı durdurulacak`,githubBackup:`Git Yedekleme`,enabled:`Etkin`,cloudLoginRequired:`Bambu Cloud girişi gerekli. GitHub yedeklemesini etkinleştirmek için Profiller → Bulut Profilleri altında giriş yapın.`,cloudLoginRequiredShort:`Bulut girişi gerekli`,githubDescription:`Yedekleme ve sürüm geçmişi için profillerinizi otomatik olarak özel bir GitHub deposuna senkronize et.`,repoIsPrivate:`Depo özel — yedeklemek için güvenli.`,repoIsPublicWarning:`Depo HERKESE AÇIK. Bambuddy yedekleri MQTT kimlik bilgilerini, Home Assistant belirteçlerini, Prometheus belirteçlerini, Bambu Cloud e-postanızı ve K-profilleri aracılığıyla yazıcı erişim kodlarını içerir. Sağlayıcınızın ayarlarında depoyu özel hale getirene kadar kaydetme engellenir.`,repoVisibilityUnknown:`Depo görünürlüğü belirlenemedi. Bambuddy, özel olarak onaylanmamış hiçbir şeye yedekleme yapmayı reddeder; kaydetme engellenecek.`,repositoryUrl:`Depo URL'si`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Güvensiz HTTP'ye izin ver`,allowInsecureHttpHint:`TLS olmadan özel ağlarda kendi barındırılan örnekler için etkinleştir`,personalAccessToken:`Kişisel Erişim Belirteci`,tokenSaved:`(kaydedildi)`,enterNewToken:`Güncellemek için yeni belirteç girin`,tokenHintGitHub:`Contents okuma ve yazma erişimi olan ayrıntılı belirteç ya da repo kapsamlı klasik belirteç.`,tokenHintGitLab:`api kapsamlı belirteç ya da read_repository ile write_repository birlikte.`,tokenHintGitea:`write:repository kapsamlı belirteç.`,tokenHintForgejo:`write:repository kapsamlı belirteç. Yalnızca bu depoyla sınırlı bir belirteç yeterlidir.`,branch:`Dal`,provider:`Git Sağlayıcısı`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Yalnızca manuel`,hourly:`Saatlik`,daily:`Günlük`,weekly:`Haftalık`,includeInBackup:`Yedeğe dahil et`,kProfiles:`K-Profilleri`,kProfilesDescription:`Bağlı yazıcılardan basınç ilerleme kalibrasyonu`,noPrintersConnected:`Bağlı yazıcı yok`,printersConnected:`{{connected}}/{{total}} bağlı`,cloudProfiles:`Bulut Profilleri`,cloudProfilesDescription:`Bambu Cloud ve Orca Cloud'dan filament, yazıcı ve işlem ön ayarları`,cloudProfilesAccounts:`Bağlı hesaplar — Bambu Cloud: {{bambu}}, Orca Cloud: {{orca}}`,appSettings:`Uygulama Ayarları`,appSettingsDescription:`Bambuddy yapılandırması (tam veritabanı)`,spoolInventory:`Makara Envanteri`,spoolInventoryDescription:`Filament makaraları, kullanım geçmişi ve maliyet takibi`,printArchives:`Baskı Arşivleri`,printArchivesDescription:`Baskı geçmişi meta verileri (gcode/3MF dosyaları yok)`,lastBackupAt:`Son yedek:`,noBackupsYet:`Henüz yedek yok`,next:`Sonraki:`,startingBackup:`Yedekleme başlatılıyor...`,test:`Test`,enableBackup:`Yedeklemeyi Etkinleştir`,testConnection:`Bağlantıyı Test Et`,enterRepoUrl:`Depo URL'sini girin`,enterRepoAndToken:`Depo URL'si ve erişim belirteci girin`,repoRequired:`Depo URL'si gerekli`,tokenRequired:`Erişim belirteci gerekli`,githubBackupEnabled:`GitHub yedeklemesi etkinleştirildi`,tokenUpdated:`Belirteç güncellendi`,settingsSaved:`Ayarlar kaydedildi`,failedToSave:`Kaydedilemedi: {{message}}`,backupCompleteFiles:`Yedekleme tamamlandı - {{count}} dosya güncellendi`,backupSkippedNoChanges:`Yedekleme atlandı - değişiklik yok`,backupFailed2:`Yedekleme başarısız: {{message}}`,clearedLogs:`{{count}} günlük temizlendi`,failedToClearLogs:`Günlükler temizlenemedi: {{message}}`,restoreFromGit:{button:`Git'ten Geri Yükle`,title:`Git yedeğinden geri yükle`,subtitle:`Bir commit ve geri yüklenecek verileri seçin`,commitLabel:`Yedek commit'i`,latestCommit:`En son yedek (dal ucu)`,categoriesLabel:`Neler geri yüklenecek`,inspecting:`Yedek içeriği okunuyor...`,itemCount:`yedekte {{count}} kayıt`,overwriteLabel:`Mevcut kayıtların üzerine yaz`,overwriteOn:`Mevcut kayıtlar yedekten güncellenecek.`,overwriteOff:`Yalnızca eksik kayıtlar eklenir; mevcut olanlara dokunulmaz.`,selectedCount:`{{count}} seçildi`,restoring:`Geri yükleniyor...`,confirmTitle:`Yedekten geri yüklensin mi?`,confirmMessage:`Seçilen kategoriler bu commit'ten geri yüklenecek. Eksik kayıtlar eklenir, mevcut kayıtlar olduğu gibi kalır.`,confirmMessageOverwrite:`Seçilen kategoriler bu commit'ten geri yüklenecek ve yerelde bulunan kayıtların üzerine yazılacak. Bu işlem geri alınamaz.`,kprofilesOverwriteCaveat:`K profilleri istisnadır: bir yuvaya yazmak yazıcıdaki kalibrasyonu her zaman değiştirir.`,tally:`{{restored}} geri yüklendi, {{skipped}} atlandı, {{failed}} başarısız`,reloadHint:`Geri yüklenen verilerin her yerde görünmesi için Bambuddy'yi yeniden yükleyin.`,partialHint:`Yukarıda listelenen kategoriler tamamlandı ve kaydedildi. Eksik olanlar hiç çalıştırılmadı.`,failed:`Geri yükleme başarısız oldu.`,loadFailed:`Yedek deposu okunamadı.`,details:{notPresent:`Bu yedek commit'inde yok`,unreadableJson:`Okunamayan JSON: {{paths}}`,settingsNoPayload:`Veride ayar yok`,settingsCredentialsWillSkip:`Kimlik bilgisi benzeri {{count}} anahtar atlanacak`,settingsCompanionWillSkip:`Kimlik bilgisi benzeri {{count}} anahtar atlanacak ve bunlara bağlı {{companion}} anahtar kapalı bırakılacak`,settingsCompanionOnlyWillSkip:`{{companion}} anahtar kapalı bırakılacak - her birinin ihtiyaç duyduğu kimlik bilgisi bir yedekten geri yüklenemez`,spoolsUsageCount:`{{count}} kullanım kaydı dahil`,archivesMetadataOnly:`Yalnızca üst veri - 3MF dosyaları ve küçük resimler Git yedeğinde yer almaz`,kprofilesPrinterCount:`{{count}} yazıcı genelinde`},notes:{noData:`Bu yedekte bu türde veri yok`,archivesPrinterMissing:`Bazı arşivler artık var olmayan yazıcılara işaret ediyordu - bağlantı temizlendi`,archivesProjectMissing:`Bazı arşivler artık var olmayan projelere işaret ediyordu - bağlantı temizlendi`,archivesOwnerCleared:`Bazı arşivler artık var olmayan kullanıcılara işaret ediyordu - sahip temizlendi, bu yüzden bir yönetici yeniden atayana kadar yalnızca archives:read_all iznine sahip kullanıcılara görünürler`,archivesOwnerUnmatched:`Bazı arşivler bu örnekte bulunmayan bir sahibi belirtiyor - sahip, yedekteki kullanıcı kimliğinden tahmin edilmek yerine temizlendi, bu yüzden bir yönetici yeniden atayana kadar yalnızca archives:read_all iznine sahip kullanıcılara görünürler`,archivesOwnerUnknown:`Bazı arşivler sahipsiz geri yüklendi - bu yedek sahip bilgisi içermiyor, bu yüzden bir yönetici atama yapana kadar yalnızca archives:read_all iznine sahip kullanıcılara görünürler`,archivesUndeleted:`Yedekten sonra silinen arşivler yeniden görünür oldu - üzerine yazma açıktı`,archivesMetadataOnly:`Geri yüklenen arşivler yalnızca üst veri içerir - 3MF dosyaları ve küçük resimler Git yedeğinde yer almaz`,spoolUsageUnresolved:`{{count}} kullanım kaydı atlandı - makaraları bu yedeğin makara listesinde olmadığı için bağlanacak bir şey yok.`,spoolUsageUnlinked:`{{count}} kullanım kaydı baskı geçmişi bağlantısı olmadan geri yüklendi - bağlantıyı korumak için Baskı arşivlerini Makara envanteriyle birlikte seçin.`,spoolTagKept:`{{count}} makara etiketi olduğu gibi bırakıldı - yedek, o zamandan beri okutulmuş bir etiketi silecek ya da ikinci bir makaraya taşıyacaktı.`,settingsCredentialsSkipped:`Kimlik bilgisi benzeri {{count}} anahtar atlandı - gizli değerleri elle yeniden girin`,settingsAuthSkipped:`{{count}} kimlik doğrulama ayarı atlandı - kilitlenme kontrolleri çalışmaya devam etsin diye bunları Ayarlar > Kimlik Doğrulama bölümünden değiştirin`,settingsCompanionSkipped:`{{keys}} kapalı bırakıldı - her birinin ihtiyaç duyduğu kimlik bilgisi bir yedekten geri yüklenemez ve bu örnekte kayıtlı değil, dolayısıyla açmak entegrasyonu kimlik doğrulamasız bırakırdı`,settingsMqttRelayFailed:`MQTT ayarları geri yüklendi ancak röle yeniden bağlanamadı - Bambuddy'yi yeniden başlatın`,kprofilesAlwaysOverwrite:`K profilleri yazıcıdaki eşleşen yuvanın her zaman üzerine yazar`,kprofilesAckUnreliable:`Yanıt vermeyen bir yazıcı yine de geri yüklendi sayılır - profilleri yazıcıda doğrulayın`,kprofilesPrinterMissing:`{{serial}} seri numaralı yazıcı yok - atlandı`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) bağlı değil - atlandı`,kprofilesUnknownNozzle:`{{serial}} için beklenmeyen nozul çapı {{nozzle}} - olduğu gibi gönderildi`,kprofilesUnmatched:`{{nozzle}} için {{count}} profilin {{printer}} üzerinde karşılığı yoktu - yeni profil olarak eklendi`,kprofilesSendFailed:`{{nozzle}} profilleri {{printer}} ({{serial}}) yazıcısına gönderilemedi`,kprofilesRefused:`{{printer}} ({{serial}}) {{nozzle}} profillerini reddetti: {{reason}}`,kprofilesStepFailed:`K profili adımı tamamlanamadı - {{reason}}. Bundan önce geri yüklenenler yine de kaydedildi.`}},history:`Geçmiş`,clear:`Temizle`,date:`Tarih`,status:`Durum`,trigger:`Tür`,triggers:{manual:`Yedek (manuel)`,scheduled:`Yedek (zamanlanmış)`,restore:`Geri yükleme`},commit:`Commit`,localBackup:`Yerel Yedekleme`,localBackupDescription:`Veritabanı, arşivler, yüklemeler ve tüm dosyalar dahil Bambuddy verilerinizin tam bir yedeğini oluşturun.`,downloadBackupLabel:`Yedeği İndir`,completeBackupZip:`Tam yedek: veritabanı + tüm dosyalar (ZIP)`,download:`İndir`,preparingBackup:`Yedek hazırlanıyor...`,creatingArchive:`Yedek arşivi oluşturuluyor... Büyük arşivler için bu biraz zaman alabilir.`,downloadingFile:`Yedek dosyası indiriliyor...`,backupDownloaded:`Yedek başarıyla indirildi`,failedToCreateBackup:`Yedek oluşturulamadı: {{message}}`,restore:`Geri Yükle`,restoreReplacesAll:`Geri yükleme tüm verilerin yerine geçer.`,restoreReplacesAllDetail:`Mevcut veritabanınız ve dosyalarınız tamamen değiştirilecek. Geri yüklemeden sonra yeniden başlatma gerekli.`,restoreConfirmTitle:`Yedeği Geri Yükle`,restoreConfirmMessage:`"{{filename}}" dosyasından geri yüklemek istediğinizden emin misiniz? Bu, mevcut veritabanınızı ve tüm dosyaları tamamen değiştirecek. Geri yüklemeden sonra uygulamanın yeniden başlatılması gerekecek.`,restoreConfirmButton:`Yedeği Geri Yükle`,uploadingFile:`Yedek dosyası yükleniyor...`,backupRestoredRestart:`Yedek geri yüklendi. Lütfen Bambuddy'yi yeniden başlatın.`,failedToRestore:`Yedek geri yüklenemedi. Lütfen dosya formatını kontrol edin.`,reloadNow:`Şimdi Yeniden Yükle`,creatingBackup:`Yedek Oluşturuluyor`,restoringBackup:`Yedek Geri Yükleniyor`,preparing:`Hazırlanıyor...`,processing:`İşleniyor...`,doNotClosePage:`Lütfen bu sayfayı kapatmayın veya başka bir yere gitmeyin. Büyük yedekler için bu işlem birkaç dakika sürebilir.`,restoring:`Geri yükleniyor...`,restoreComplete:`Geri Yükleme Tamamlandı`,restoreFailed2:`Geri Yükleme Başarısız`,importSettings:`Ayarları bir yedek dosyasından içe aktar`,pleaseWaitRestoring:`Verileriniz geri yüklenirken lütfen bekleyin`,selectBackupFile:`Yedek dosyası seçmek için tıklayın (.json veya .zip)`,duplicateHandling:`Yinelenen yönetiminin nasıl çalıştığı:`,matchPrinters:`Yazıcılar`,matchPrintersBy:`seri numarasına göre eşleşti`,matchSmartPlugs:`Akıllı Prizler`,matchSmartPlugsBy:`IP adresine göre eşleşti`,matchNotificationProviders:`Bildirim Sağlayıcıları`,matchNotificationProvidersBy:`ada göre eşleşti`,matchFilaments:`Filamentler`,matchFilamentsBy:`ad + tür + markaya göre eşleşti`,matchArchives:`Arşivler`,matchArchivesBy:`içerik hash'ine göre eşleşti (her zaman atlanır)`,matchPendingUploads:`Bekleyen Yüklemeler`,matchPendingUploadsBy:`dosya adına göre eşleşti`,matchSettingsTemplates:`Ayarlar ve Şablonlar`,matchSettingsTemplatesBy:`her zaman üzerine yazılır`,replaceExisting:`Mevcut veriyi değiştir`,keepExisting:`Mevcut veriyi koru`,overwriteDescription:`Zaten mevcut olan öğeleri yedek verisiyle üzerine yaz`,keepDescription:`Yalnızca zaten mevcut olmayan öğeleri geri yükle`,overwriteCaution:`Dikkat:`,overwriteWarning:`Üzerine yazma, mevcut yapılandırmalarınızı yedekten gelen verilerle değiştirecek. Güvenlik için yazıcı erişim kodları asla üzerine yazılmaz.`,cancel:`İptal`,processingBackup:`Yedek dosyası işleniyor...`,itemsRestored:`Geri Yüklenen Öğeler`,itemsSkipped:`Atlanan Öğeler`,restored:`Geri yüklendi`,skippedAlreadyExist:`Atlandı (zaten mevcut)`,filesCategory:`Dosyalar (3MF, küçük resimler, vb.)`,andMore:`...ve {{count}} daha`,newApiKeysGenerated:`Yeni API Anahtarları Oluşturuldu`,keysShownOnce:`Bu anahtarlar yalnızca bir kez gösterilir. Şimdi kopyalayın!`,copy:`Kopyala`,noDataFound:`Yedek dosyasında geri yüklenecek veri bulunamadı.`,close:`Kapat`,scheduledBackup:`Zamanlanmış Yedekler`,scheduledBackupDescription:`Zamanlamaya göre otomatik olarak yedek anlık görüntüleri oluşturun. Çıktı dizini bir NAS veya harici depolama alanına bağlanabilir.`,frequency:`Sıklık`,backupTime:`Saat`,retention:`Saklama`,retentionDescription:`Saklanacak yedek sayısı`,outputPath:`Çıktı Yolu`,outputPathPlaceholder:`Varsayılan: {{path}}`,outputPathDescription:`Varsayılan konum için boş bırakın`,runNow:`Şimdi Çalıştır`,backupFiles:`Yedek Dosyaları`,noScheduledBackups:`Henüz yedek yok`,deleteBackup:`Sil`,deleteBackupConfirm:`Bu yedek dosyası silinsin mi?`,backupRunning:`Yedekleme devam ediyor...`,scheduledBackupComplete:`Yedekleme başarıyla tamamlandı`,scheduledBackupFailed:`Yedekleme başarısız`,nextBackup:`Sonraki yedek`,backupSize:`Boyut`,localTimeHint:`Yerel saat ({{tz}})`,defaultPathLabel:`Varsayılan:`,pathCheck:{title:`Bambuddy bu dizine yazamıyor`,howToFix:`Nasıl düzeltilir:`,sandboxed:`Bambuddy servisi {{path}} dizinine yazamıyor. systemd birimi ProtectSystem=strict ile çalıştığı için kurulum, veri ve günlük dizinleri dışındaki her dizin servis açısından salt okunurdur - kendi kabuğunuzdan yazabildiğiniz bir dizin olsa bile.`,read_only:`{{path}} salt okunur bir dosya sisteminde.`,permission_denied:`Bambuddy'nin {{path}} dizinine yazma izni yok. Dizinin sahibini ve izinlerini kontrol edin.`,no_space:`{{path}} dizinini barındıran dosya sistemi dolu.`,not_a_directory:`{{path}} var ancak bir dizin değil.`,missing:`{{path}} yok ve oluşturulamadı.`,error:`Bambuddy {{path}} dizinine yazamıyor.`,ephemeralTitle:`Bu yedekler kapsayıcı yeniden oluşturulduğunda kaybolur`,container_ephemeral:`{{path}} ana makinede değil, Bambuddy kapsayıcısının içinde. Oraya yazılan yedekler kapsayıcı yeniden oluşturulduğunda kaybolur. Dizini ana makineden bağlayın:`},categories:{settings:`Ayarlar`,notification_providers:`Bildirim Sağlayıcıları`,notification_templates:`Bildirim Şablonları`,smart_plugs:`Akıllı Prizler`,printers:`Yazıcılar`,filaments:`Filamentler`,maintenance_types:`Bakım Türleri`,archives:`Arşivler`,projects:`Projeler`,pending_uploads:`Bekleyen Yüklemeler`,external_links:`Harici Bağlantılar`,api_keys:`API Anahtarları`}},tags:{title:`Etiketler`,addTag:`Etiket Ekle`,editTag:`Etiketi Düzenle`,deleteTag:`Etiketi Sil`,tagName:`Etiket Adı`,tagColor:`Etiket Rengi`,noTags:`Etiket yok`,deleteConfirm:`Bu etiketi silmek istediğinizden emin misiniz?`,manageTags:`Etiketleri Yönet`},uploadModal:{title:`3MF Dosyalarını Yükle`,dragDrop:`.3mf dosyalarını buraya sürükleyip bırakın`,or:`veya`,browseFiles:`Dosyalara Göz At`,extractionInfo:`Yazıcı modeli, 3MF dosya meta verilerinden otomatik olarak çıkarılacak.`,uploaded:`yüklendi`,failed:`başarısız`,uploading:`Yükleniyor...`,upload:`Yükle`,uploadFailed:`Yükleme başarısız`},editArchive:{title:`Arşivi Düzenle`,name:`Ad`,namePlaceholder:`Baskı adı`,printer:`Yazıcı`,noPrinter:`Yazıcı yok`,project:`Proje`,noProject:`Proje yok`,itemsPrinted:`Yazdırılan Öğeler`,itemsPrintedHelp:`Bu baskı işinde üretilen öğe sayısı. Tüm tabla bozulduysa 0 girin.`,filamentUsed:`Kullanılan filament (g)`,filamentUsedPlaceholder:`ör. 46.16`,filamentUsedHelp:`Bir baskı 3MF dosyası olmadan arşivlendiyse elle girin; böylece filament toplamlarına yine de dahil olur. 3MF dosyası olan bir arşiv yeniden tarandığında bu değer dosyadan yeniden okunur.`,notes:`Notlar`,notesPlaceholder:`Bu baskı hakkında notlar ekleyin...`,externalLink:`Harici Bağlantı`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Printables, Thingiverse veya başka bir kaynağa bağlantı`,tags:`Etiketler`,tagsPlaceholder:`Etiketler ekle...`,addMoreTags:`Daha fazla etiket ekle...`,matchingTags:`"{{query}}" ile eşleşen`,existingTags:`Mevcut etiketler`,clickToAdd:`(eklemek için tıklayın)`,status:`Durum`,failureReason:`Başarısızlık Nedeni`,selectReason:`Neden seç...`,photos:`Yazdırılan Sonuç Fotoğrafları`,photosHelp:`Yazdırılan sonuçunuzun fotoğraflarını eklemek için + tıklayın`,printResult:`Baskı sonucu`,saving:`Kaydediliyor...`,failureReasons:{adhesionFailure:`Yapışma başarısız`,spaghettiDetached:`Spagetti / Ayrılmış`,layerShift:`Katman kayması`,cloggedNozzle:`Tıkalı nozul`,filamentRunout:`Filament bitti`,warping:`Bükülme`,stringing:`İplik oluşumu`,underExtrusion:`Az ekstrüzyon`,powerFailure:`Güç kesintisi`,userCancelled:`Kullanıcı iptal etti`,noStatusUpdate:`Durum güncellemesi alınmadı`,other:`Diğer`},statuses:{completed:`Tamamlandı`,failed:`Başarısız`,aborted:`İptal edildi`,printing:`Yazdırılıyor`}},kProfiles:{title:`K-Profilleri`,noPrintersConfigured:`Yapılandırılmış Yazıcı Yok`,addPrinterInSettings:`K-profillerini yönetmek için Ayarlarda bir yazıcı ekleyin`,noActivePrinters:`Aktif Yazıcı Yok`,enablePrinterConnection:`K-profillerini görüntülemek için bir yazıcı bağlantısını etkinleştirin`,loadingProfiles:`K-Profilleri yükleniyor...`,printerOffline:`Yazıcı Çevrimdışı`,printerOfflineDesc:`Seçilen yazıcı bağlı değil. K-profillerini görüntülemek için açın.`,noMatchingProfiles:`Eşleşen Profil Yok`,noMatchingProfilesDesc:`Arama kriterlerinizle eşleşen profil yok`,noKProfiles:`K-Profili Yok`,noKProfilesDesc:`{{diameter}}mm nozul için basınç ilerleme profili bulunamadı`,createFirstProfile:`İlk Profili Oluştur`,printer:`Yazıcı`,nozzle:`Nozul`,refresh:`Yenile`,addProfile:`Profil Ekle`,export:`Dışa Aktar`,import:`İçe Aktar`,select:`Seç`,selectAll:`Tümünü Seç`,delete:`Sil`,searchPlaceholder:`Ad veya filamente göre ara...`,allExtruders:`Tüm Ekstrüderler`,leftOnly:`Yalnızca Sol`,rightOnly:`Yalnızca Sağ`,allFlow:`Tüm Akış`,hfOnly:`Yalnızca HF`,sOnly:`Yalnızca S`,sortName:`Sırala: Ad`,sortKValue:`Sırala: K-Değeri`,sortFilament:`Sırala: Filament`,leftExtruder:`Sol Ekstrüder`,rightExtruder:`Sağ Ekstrüder`,modal:{addTitle:`K-Profili Ekle`,editTitle:`K-Profilini Düzenle`,profileName:`Profil Adı`,profileNamePlaceholder:`PLA Profilim`,kValue:`K-Değeri`,kValuePlaceholder:`0.020`,kValueHelp:`Tipik aralık: PLA için 0.01 - 0.06, PETG için 0.02 - 0.10`,filament:`Filament`,selectFilament:`Filament seç...`,source:{local:`İçe aktarılmış`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Yerleşik`},noFilamentsHelp:`Kullanılabilir filament yok. Bambu Cloud’a giriş yapın veya Profiller → Yerel Profiller altından hızır ayarları içe aktarın.`,searchFilaments:`Filament ara...`,noFilamentMatches:`Bu aramayla eşleşen filament yok`,flowType:`Akış Türü`,highFlow:`Yüksek Akış`,standard:`Standart`,nozzleSize:`Nozul Boyutu`,extruder:`Ekstrüder`,extruders:`Ekstrüderler`,left:`Sol`,right:`Sağ`,notes:`Notlar (yerel olarak saklanır)`,notesPlaceholder:`Bu profil hakkında notlar ekleyin...`,notesHelp:`Notlar yazıcıda değil, Bambuddy'de kaydedilir`,syncing:`Yazıcıyla senkronize ediliyor...`,savingExtruder:`Ekstrüdere kaydediliyor {{current}}/{{total}}...`,pleaseWait:`Lütfen bekleyin`},deleteConfirm:{title:`Profili Sil`,cannotUndo:`Bu geri alınamaz`,message:`"{{name}}" yazıcıdan silmek istediğinizden emin misiniz?`},bulkDelete:{title:`Profilleri Sil`,cannotUndo:`Bu geri alınamaz`,message:`Yazıcıdan seçili {{count}} profili silmek istediğinizden emin misiniz?`},toast:{profileSaved:`K-profili kaydedildi`,profilesSaved:`{{count}} ekstrüdere K-profili kaydedildi`,selectAtLeastOneExtruder:`Lütfen en az bir ekstrüder seçin`,selectFilament:`Önce bir filament seçin`,filamentNotResolvable:`{{name}} için Bambu filament kimliği yok — yazıcı bunun için profil saklayamaz`,profileDeleted:`K-profili silindi`,profilesDeleted:`{{count}} profil silindi`,exportedProfiles:`{{count}} profil dışa aktarıldı`,importedProfiles:`{{total}} profilden {{count}} tanesi içe aktarıldı`,noProfilesToExport:`Dışa aktarılacak profil yok`,invalidFileFormat:`Geçersiz dosya formatı`,failedToParseImport:`İçe aktarma dosyası ayrıştırılamadı`,failedToSaveBatch:`K-profilleri kaydedilemedi`,noteSaved:`Not kaydedildi`,failedToSaveNote:`Not kaydedilemedi`},permission:{noRead:`Profilleri yenileme izniniz yok`,noCreate:`Profil ekleme izniniz yok`,noUpdate:`K-profillerini güncelleme izniniz yok`,noDelete:`K-profillerini silme izniniz yok`,noExport:`Profilleri dışa aktarma izniniz yok`,noImport:`Profilleri içe aktarma izniniz yok`}},virtualPrinter:{title:`Sanal Yazıcı`,running:`Çalışıyor`,stopped:`Durduruldu`,description:{default:`Bambu Studio ve OrcaSlicer'da görünen bir sanal yazıcı etkinleştirin. Bu yazıcıya gönderilen dosyalar yazdırılmadan doğrudan arşivlenecek.`,proxy:`Dilimleyici trafiğini gerçek bir yazıcıya ileten bir proxy etkinleştirin, böylece herhangi bir ağ üzerinden uzaktan baskı yapabilirsiniz.`},enable:{title:`Sanal Yazıcıyı Etkinleştir`,visibleInSlicer:`Dilimleyici keşfinde "Bambuddy" olarak görünür`,proxyingTo:`{{name}} cihazına proxy yapılıyor`,notActive:`Aktif değil`},model:{title:`Yazıcı Modeli`,description:`Öykünülecek yazıcı modelini seçin.`,restartWarning:`Modeli değiştirmek sanal yazıcıyı yeniden başlatacak`},accessCode:{title:`Erişim Kodu`,isSet:`Erişim kodu ayarlandı`,notSet:`Erişim kodu ayarlanmadı - etkinleştirmek için gerekli`,placeholder:`8 karakterli kodu girin`,placeholderChange:`Değiştirmek için yeni kodu girin`,hint:`Tam olarak 8 karakter olmalı. Dilimleyiciler tarafından kimlik doğrulama için kullanılır.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Hedef yazıcıdan devralındı`,derivedFromTargetHint:`Hedef yazıcının erişim kodunu kullanır. Köprü, dilimleyicinin kimlik doğrulamasını gerçek yazıcıya iletir, bu nedenle kodlar eşleşmelidir — değiştirmek için yazıcının ayarlarında erişim kodunu düzenleyin.`,reveal:`Erişim kodunu göster`,hide:`Erişim kodunu gizle`},targetPrinter:{title:`Hedef Yazıcı`,configured:`Proxy hedefi yapılandırıldı`,notConfigured:`Hedef yazıcı seçilmedi - proxy modu için gerekli`,placeholder:`Bir yazıcı seçin...`,hint:`Dilimleyici trafiğine proxy yapmak için yazıcıyı seçin. Yazıcı LAN modunda olmalıdır.`,noPrinters:`Yapılandırılmış yazıcı yok. Proxy modunu kullanmak için önce bir yazıcı ekleyin.`},remoteInterface:{title:`Ağ Arayüzü Geçersiz Kılma`,configured:`Arayüz geçersiz kılma aktif`,optional:`İsteğe bağlı - otomatik algılanan IP yanlışsa kullanın (örn. birden fazla NIC, Docker, VPN)`,placeholder:`Otomatik algıla (varsayılan)...`,hint:`SSDP üzerinden tanıtılan ve TLS sertifikasında kullanılan IP adresini geçersiz kıl. Bambuddy birden fazla ağ arayüzüne sahip olduğunda kullanışlıdır.`},mode:{title:`Mod`,archive:`Arşiv`,archiveDesc:`Dosyaları hemen arşivle`,review:`İnceleme`,reviewDesc:`Arşivlemeden önce incele`,queue:`Kuyruk`,queueDesc:`Arşivle ve kuyruğa ekle`,proxy:`Proxy`,proxyDesc:`Gerçek yazıcıya ilet`},autoDispatch:{title:`Otomatik sevk`,description:`Kuyruğa eklendiğinde baskıları otomatik olarak başlat. Kapalıyken, baskılar manuel sevki bekler.`},queueForceColorMatch:{title:`Renk eşleşmesini zorla`,description:`Tam olarak doğru filament türü ve rengi yüklü olmayan bir yazıcıya sevk etmeyi reddet. Varsayılan olarak kapalı — bu olmadan kuyruk yalnızca model eşleşmesi kullanır ve yanlış renk yüklü bir yazıcı seçebilir.`},saveAmsMapping:{title:`AMS eşlemesini kaydet`,description:`Dilimleyicinin kendi seçtiği AMS yuvasını (project_file MQTT komutundan) arşive kalıcı olarak kaydeder, böylece daha sonraki bir yeniden yazdırma dosyanın türünden/renginden yeniden türetmek yerine tam olarak aynı fiziksel makarayı yeniden kullanır. Varsayılan olarak kapalı.`},gcodeInjection:{title:`G-code enjeksiyonu`,description:`Ayarlar'da model bazında yapılandırılan G-code parçacıklarını bu VP'nin işlerine uygular. Varsayılan olarak kapalı.`},tailscaleDisabled:{title:`Tailscale entegrasyonu`,description:`Bu VP'yi Tailscale üzerinden açıkta olarak işaretlemek için etkinleştirin. Dilimleyiciye hangi IP'yi yapıştıracağınızı bilmeniz için ana bilgisayarın Tailscale adresini gösterir. CA içe aktarma adımı değişmedi — bu anahtarın sertifikalar üzerinde etkisi yoktur.`},setupRequired:{title:`Kurulum Gerekli`,description:`Sanal yazıcı özelliği çalışmadan önce ek sistem yapılandırması gerektirir. Bu, port yönlendirme, güvenlik duvarı kuralları ve platforma özgü ayarları içerir.`,readGuide:`Etkinleştirmeden önce kurulum kılavuzunu okuyun`},archiveNameSource:{title:`Arşiv ad kaynağı`,description:`Dosyalar sanal yazıcı aracılığıyla geldiğinde yeni arşivlerin nasıl adlandırılacağını seçin. "Meta veri" 3MF'den dilimleyici-gömülü başlığı kullanır (varsayılan). "Dosya adı" Bambu Studio'nun FTP üzerinden gönderdiği dosya adını kullanır. Not: Bambu Studio, 3MF'de bir Başlık alanı varsa "yazıcıya gönder" iletişim kutusunda yazdığınız adı bu alanla geçersiz kılar, bu nedenle her iki mod da genellikle aynı dizeyi üretir.`,metadata:`Meta veri`,filename:`Dosya adı`},caCert:{title:`Dilimleyici sertifikası`,description:`Sanal yazıcılar Bambuddy CA tarafından imzalanmış bir TLS sertifikası kullanır. Bağlantıyı kabul etmesi için bu CA sertifikasını dilimleyicinizin güven deposuna bir kez içe aktarın — komut satırından kopyalamaya gerek yok.`,copy:`Kopyala`,copied:`Kopyalandı`,download:`İndir`,fingerprint:`SHA-256`},howItWorks:{title:`Nasıl çalışır`,step1:`Aynı LAN'da, sanal yazıcılar dilimleyicinizde (Bambu Studio / OrcaSlicer) keşif yoluyla otomatik olarak görünür. Diğer ağlardan, IP adresi ve erişim koduyla manuel olarak ekleyin.`,step2:`3MF dosyalarını Bambuddy'ye yüklemek için Arşiv, İnceleme ve Kuyruk modlarında dilimleyicinizdeki "Gönder" düğmesini kullanın. Dilimleyici "Baskı başarılı" gösterecek — dosya saklanır, yazdırılmaz.`,step3:`Proxy modunda, sanal yazıcı tüm trafiği gerçek bir yazıcıya iletir — baskılar doğrudan bağlıymış gibi hemen başlar.`},status:{title:`Durum Ayrıntıları`,printerName:`Yazıcı Adı`,model:`Model`,serialNumber:`Seri Numarası`,mode:`Mod`,pendingFiles:`Bekleyen Dosyalar`,targetPrinter:`Hedef Yazıcı`,ftpPort:`FTP Portu`,mqttPort:`MQTT Portu`,ftpConnections:`FTP Bağlantıları`,mqttConnections:`MQTT Bağlantıları`},toast:{updated:`Sanal yazıcı ayarları güncellendi`,failedToUpdate:`Ayarlar güncellenemedi`,copyFailed:`Kopyalama başarısız — metni manuel olarak seçmeyi deneyin`,accessCodeRequired:`Lütfen önce bir erişim kodu ayarlayın`,targetPrinterRequired:`Lütfen önce bir hedef yazıcı seçin`,bindIpRequired:`Lütfen önce bir bind IP'si ayarlayın`,accessCodeEmpty:`Erişim kodu boş olamaz`,accessCodeLength:`Erişim kodu tam olarak 8 karakter olmalı`,targetCodeChangedRebind:`Erişim kodu artık yeni hedef yazıcıyla eşleşiyor. Yeni kodu almak için bu cihazı dilimleyicinizde yeniden ekleyin.`,created:`Sanal yazıcı oluşturuldu`,failedToCreate:`Sanal yazıcı oluşturulamadı`,deleted:`Sanal yazıcı silindi`,failedToDelete:`Sanal yazıcı silinemedi`},list:{title:`Sanal Yazıcılar`,add:`Ekle`,addFirst:`Sanal Yazıcı Ekle`,empty:`Yapılandırılmış sanal yazıcı yok. Başlamak için bir tane ekleyin.`},bindIp:{title:`Bind Arayüzü`,placeholder:`Arayüz seç...`,hint:`Bu sanal yazıcının bağlanacağı ağ arayüzü. Yazıcı başına benzersiz olmalıdır.`},proxy:{accessCodeHint:`Proxy modunda, dilimleyicide hedef yazıcınızın erişim kodunu kullanın. Bağlantı şeffaf olarak gerçek yazıcıya iletilir.`},addDialog:{title:`Sanal Yazıcı Ekle`,name:`Ad`,hint:`Oluşturduktan sonra erişim kodunu, hedef yazıcıyı ve diğer ayarları yapılandırabilirsiniz.`,create:`Oluştur`},deleteConfirm:{title:`Sanal Yazıcıyı Sil`,message:`"{{name}}" silmek istediğinizden emin misiniz? Bu, bu yazıcı için tüm servisleri durduracak.`}},modelViewer:{openInSlicer:`Dilimleyicide Aç`,openInSlicerWith:`{{slicer}} ile aç`,moreSlicerOptions:`Diğer dilimleyici seçenekleri`,openInSlicerFailed:`Dilimleyicide açılamadı`,tabs:{model:`3B Model`},notAvailable:`mevcut değil`,plates:`Plakalar`,allPlates:`Tüm Plakalar`,plateNumber:`Plaka {{number}}`,plateCount:`{{count}} plaka`,plateCount_other:`{{count}} plaka`,objectCount:`{{count}} nesne`,objectCount_other:`{{count}} nesne`,filamentCount:`{{count}} filament`,filamentCount_other:`{{count}} filament`,eta:`ETA {{minutes}} dk`,noPreview:`Bu dosya için önizleme yok`,pagination:{pageOf:`{{total}} sayfadan {{current}} tanesi`,prev:`Önceki`,next:`Sonraki`},errors:{failedToLoad:`Dosya yüklenemedi`,noMeshes:`3MF dosyasında ağ bulunamadı`,unsupportedFormat:`Desteklenmeyen dosya formatı`}},maintenanceDescriptions:{lubricateCarbonRods:`Düzgün hareket için karbon çubuklara yağ uygula`,lubricateRails:`Düzgün hareket için lineer raylara yağ uygula`,cleanNozzle:`Tıkanmaları önlemek için hotend ve nozulu temizle`,checkBelts:`Doğru baskılar için kayış gerginliğini kontrol et`,cleanBuildPlate:`Daha iyi yapışma için baskı plakasını temizle`,checkExtruder:`Aşınma için ekstrüder dişlilerini inceleyin`,checkCooling:`Soğutma fanlarının düzgün çalıştığından emin ol`,generalInspection:`Genel yazıcı denetimi`,cleanCarbonRods:`Sürtünmeyi azaltmak için karbon çubukları temizle`,lubricateSteelRods:`Düzgün hareket için çelik çubuklara yağ uygula`,cleanSteelRods:`Sürtünmeyi azaltmak için çelik çubukları temizle`,cleanLinearRails:`Toz ve kalıntıları temizlemek için lineer rayları sil`,checkPtfeTube:`Aşınma veya hasar için PTFE tüpünü incele`,replaceHepaFilter:`Hava kalitesi için HEPA filtresini değiştir`,replaceCarbonFilter:`Aktif karbon filtresini değiştir`,lubricateLeftNozzleRail:`Sol nozul rayını yağla (H2 serisi)`},haSensors:{label:`Sensörler`,unavailable:`Kullanılamıyor`,blocksPrints:`{{entity}} — uyarı sürerken baskıları bekletir`,states:{open:`Açık`,closed:`Kapalı`,unlocked:`Kilit açık`,locked:`Kilitli`,detected:`Algılandı`,clear:`Temiz`,wet:`Islak`,dry:`Kuru`,problem:`Sorun`,ok:`Normal`,running:`Çalışıyor`,stopped:`Durdu`,on:`Açık`,off:`Kapalı`},sectionTitle:`Home Assistant Sensörleri (Yazıcılar)`,add:`Sensör ekle`,addTitle:`Home Assistant sensörü ekle`,editTitle:`Home Assistant sensörünü düzenle`,empty:`Henüz sensör yok. Yazıcı kartında göstermek için Home Assistant'tan bir kapı kontağı veya termometre bağlayın.`,unknownPrinter:`Bilinmeyen yazıcı`,badgeBlocks:`Baskıları bekletir`,badgeNotifies:`Bildirir`,badgeHidden:`Kartta gizli`,printer:`Yazıcı`,entity:`Varlık`,searchPlaceholder:`Varlık ara...`,noEntities:`Eşleşen varlık yok`,name:`Görünen ad`,alertWhen:`Şu durumda uyar`,alertNever:`Asla — yalnızca göster`,alertAbove:`Şunun üstünde`,alertBelow:`Şunun altında`,alertHint:`Uyarı durumu sensörü yazıcı kartında vurgular ve aşağıdaki seçenekleri etkinleştirir.`,showOnCard:`Yazıcı kartında göster`,notifyOnAlert:`Uyarı başladığında bildirim gönder`,blockPrint:`Uyarı sürerken kuyruktaki baskıları beklet`,blockPrintHint:`İşler kuyrukta kalır ve sensör normale döndüğünde kendiliğinden başlar. Home Assistant'a ulaşılamadığı sürece yok sayılır.`,toast:{created:`Sensör eklendi`,updated:`Sensör kaydedildi`,deleted:`Sensör kaldırıldı`},error:{pickEntity:`Bir Home Assistant varlığı seçin`,nameRequired:`Bir görünen ad girin`,printerRequired:`Bir yazıcı seçin`,alertRequired:`Önce bir uyarı koşulu belirleyin`}},locationHaSensors:{sectionTitle:`Home Assistant Sensörleri (Depolama Konumları)`,sectionDescription:`Filament kartında ve tabloda canlı değerleri göstermek için Home Assistant sıcaklık, nem veya pil sensörlerini depolama konumlarınıza bağlayın. Konum başına kategori başına yalnızca bir sensöre izin verilir.`,add:`Sensör ekle`,addTitle:`Home Assistant sensörü ekle`,editTitle:`Home Assistant sensörünü düzenle`,empty:`Henüz sensör yok. Filament kartında göstermek için Home Assistant'tan bir sıcaklık veya nem sensörü bağlayın.`,unknownLocation:`Bilinmeyen konum`,location:`Depolama Konumu`,showOnCard:`Filament kartında göster`,overwriteConfirm:{title:`Mevcut sensör değiştirilsin mi?`,messageTemperature:`"{{location}}" konumunda zaten bağlı bir sıcaklık sensörü var: {{name}}. Devam etmek onu değiştirecek.`,messageHumidity:`"{{location}}" konumunda zaten bağlı bir nem sensörü var: {{name}}. Devam etmek onu değiştirecek.`,messageBattery:`"{{location}}" konumunda zaten bağlı bir pil sensörü var: {{name}}. Devam etmek onu değiştirecek.`},autoAdd:{confirmTitle:`Diğer sensörler de eklensin mi?`,confirmMessage:`Bambuddy bu konum için başka sensörler de buldu. Eklemek istediklerinizi seçin.`,added:`Ayrıca eklendi: {{names}}`,noneFound:`Bu konum için eşleşen sıcaklık, nem veya pil sensörü bulunamadı.`,onlyThisOne:`Sadece bunu`},options:{buttonLabel:`Sensör seçenekleri`,title:`Konum Sensörü Seçenekleri`,description:`Bu değerler, bir konumun ilk sensörüyle birlikte bir sıcaklık, nem veya pil sensörü otomatik olarak bağlandığında kullanılır.`,generalSettings:`Genel ayarlar`,pollInterval:`Güncelleme aralığı (saniye)`,pollIntervalHint:`Bambuddy'nin Home Assistant'ı ne sıklıkla sorgulayıp ekrandaki sensör değerlerini güncellediği. Minimum 60 saniye.`,colorizeValues:`Sensör değerlerini uyarı eşiklerine göre renklendir`,aboveColor:`Eşik üstü rengi`,belowColor:`Eşik altı rengi`,optimalColor:`Optimal değer rengi`,colors:{red:`Kırmızı`,orange:`Turuncu`,yellow:`Sarı`,green:`Yeşil`,blue:`Mavi`,purple:`Mor`,pink:`Pembe`},saved:`Seçenekler kaydedildi`,saveFailed:`Seçenekler kaydedilemedi`,reset:`Sıfırla`,resetConfirm:{title:`Mevcut tüm konum sensörleri sıfırlansın mı?`,message:`Bu işlem, mevcut tüm konum sıcaklık, nem ve pil sensörlerinin uyarı eşiklerini, bildirimlerini ve kart görünürlüğünü yukarıda yapılandırılan değerlerle üzerine yazar ve her sensörün adını Home Assistant'taki dost adına geri yükler — yazıcı sensörleri etkilenmez. Bu işlem geri alınamaz. Sensör sayısına bağlı olarak bu işlem biraz zaman alabilir.`},resetDone:`{{count}} konum sensörüne uygulandı`,resetFailed:`Konum sensörleri sıfırlanamadı`},deleteAllConfirm:{title:`Tüm sensörler silinsin mi?`,message:`"{{location}}" konumuna bağlı tüm {{count}} sensör silinecek. Bu işlem geri alınamaz.`},currentlyBound:`Şu anda bağlı: {{entity}}`,error:{locationRequired:`Bir depolama konumu seçin`},toast:{created:`Sensör eklendi`,updated:`Sensör kaydedildi`,deleted:`Sensör kaldırıldı`}},smartPlugs:{offline:`Çevrimdışı`,admin:`Yönetici`,openPlugAdminPage:`Priz yönetici sayfasını aç`,deleteSmartPlug:`Akıllı Prizi Sil`,turnOnSmartPlug:`Akıllı Prizi Aç`,turnOffSmartPlug:`Akıllı Prizi Kapat`,turnOn:`Aç`,turnOff:`Kapat`,addSmartPlug:{scanningNetwork:`Ağ taranıyor...`,chooseEntity:`Bir varlık seçin...`,connectionFailed:`Bağlantı başarısız`,searchEntities:`Varlıklarda ara...`,searchPowerSensors:`Güç sensörlerinde ara...`,searchEnergySensors:`Enerji sensörlerinde ara...`,placeholders:{plugName:`Oturma Odası Prizi`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Güç konusuyla aynı veya farklı`}},linkedTo:`Bağlı:`,monitorOnly:`Yalnızca İzle`,alerts:`Uyarılar`,scheduleOn:`{{time}} Açık`,scheduleOff:`{{time}} Kapalı`,on:`Açık`,off:`Kapalı`,power:`Güç`,kwhToday:`Bugün kWh`,settings:`Ayarlar`,automationSettings:`Otomasyon Ayarları`,showInSwitchbar:`Anahtar Çubuğunda Göster`,quickAccessSidebar:`Kenar çubuğundan hızlı erişim`,enabled:`Etkin`,enableAutomation:`Bu priz için otomasyonu etkinleştir`,autoOn:`Otomatik Aç`,autoOnDescription:`Baskı başladığında aç`,autoOff:`Otomatik Kapat`,autoOffDescription:`Baskı tamamlandığında kapat (tek seferlik)`,autoOffPersistent:`Etkin Tut`,autoOffPersistentDescription:`Tek seferlik yerine baskılar arasında etkin kal`,controlsPrinterPower:`Yazıcıya güç veriyor`,controlsPrinterPowerDescription:`Bu priz yalnızca bir aksesuara (filtre fanı, aydınlatma) güç veriyorsa kapatın. Aksi halde prizi kapatmak yazıcıyı çevrimdışı olarak işaretler.`,autoOffAfterDrying:`Kurutmadan Sonra Otomatik Kapat`,autoOffAfterDryingDescription:`AMS kurutması tamamlandığında kapat`,delayAfterDryingMinutes:`Kurutma gecikmesi (dakika)`,turnOffDelayMode:`Kapatma Gecikme Modu`,time:`Süre`,temp:`Sıcaklık`,delayMinutes:`Gecikme (dakika)`,tempThreshold:`Sıcaklık eşiği (°C)`,tempThresholdDescription:`Nozul bu sıcaklığın altına soğuduğunda kapanır`,edit:`Düzenle`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz? Bu geri alınamaz.`,turnOnConfirm:`"{{name}}" açmak istediğinizden emin misiniz?`,turnOffConfirm:`"{{name}}" kapatmak istediğinizden emin misiniz? Bu, bağlı cihazın gücünü kesecek.`,failedToTurn:`"{{name}}" {{action}} başarısız`,unknown:`Bilinmiyor`,addTitle:`Akıllı Priz Ekle`,editTitle:`Akıllı Prizi Düzenle`,stopScanning:`Taramayı Durdur`,discoverTasmota:`Tasmota Cihazlarını Keşfet`,foundDevices:`{{count}} cihaz bulundu - seçmek için tıklayın:`,noDevicesFound:`Ağınızda Tasmota cihazı bulunamadı`,haNotConfigured:`Home Assistant yapılandırılmamış. Şuradan ayarlayın:`,haSettingsPath:`Ayarlar → Ağ → Home Assistant`,selectEntity:`Varlık Seç *`,ipAddress:`IP Adresi *`,nameLabel:`Ad *`,username:`Kullanıcı Adı`,password:`Parola`,authHint:`Tasmota cihazınız kimlik doğrulama gerektirmiyorsa boş bırakın`,linkToPrinter:`Yazıcıya Bağla`,noPrinter:`Yazıcı yok (yalnızca manuel kontrol)`,linkingDescription:`Bağlama, baskılar başladığında/tamamlandığında otomatik açma/kapamayı etkinleştirir`,powerAlerts:`Güç Uyarıları`,alertAbove:`Üstündeyse uyar (W)`,alertBelow:`Altındaysa uyar (W)`,alertDescription:`Güç tüketimi bu eşikleri geçtiğinde bildirim alın. O yönü devre dışı bırakmak için boş bırakın.`,dailySchedule:`Günlük Zamanlama`,turnOnAt:`Şu saatte aç`,turnOffAt:`Şu saatte kapat`,scheduleDescription:`Prizi günlük olarak bu saatlerde otomatik aç/kapat. O eylemi atlamak için boş bırakın.`,showOnPrinterCard:`Yazıcı Kartında Göster`,displayOnPrinterCard:`Yazıcı kartında düğme göster`,connectedResult:`Bağlandı!`,deviceLabel:`Cihaz: {{name}} - `,stateLabel:`Durum: {{state}}`,test:`Test`,delete:`Sil`,save:`Kaydet`,add:`Ekle`,cancel:`İptal`,failedToStartScan:`Tarama başlatılamadı`,nameRequired:`Ad gerekli`,entityRequired:`Home Assistant prizleri için varlık gerekli`,mqttTopicRequired:`Güç, enerji veya durum izleme için en az bir MQTT konusu yapılandırılmalı`,loadingEntities:`Varlıklar yükleniyor...`,loading:`Yükleniyor...`,failedToLoadEntities:`Varlıklar yüklenemedi: {{error}}`,noEntitiesMatching:`"{{search}}" ile eşleşen varlık bulunamadı`,noEntitiesAvailable:`Kullanılabilir varlık yok`,searchingEntities:`Tüm varlıklar aranıyor ({{count}} bulundu)`,showingEntities:`switch, light, input_boolean gösteriliyor ({{count}} mevcut)`,energyMonitoringOptional:`Enerji İzleme (İsteğe Bağlı)`,energyMonitoringHint:`Güç/enerji verisi sağlayan sensörleri arayın ve seçin.`,powerSensorW:`Güç Sensörü (W)`,energyTodayKwh:`Bugünkü Enerji (kWh)`,totalEnergyKwh:`Toplam Enerji (kWh)`,noMatchingSensors:`Eşleşen sensör yok`,none:`Hiçbiri`,mqttNotConfigured:`MQTT brokerı yapılandırılmamış. Şurada broker adresini ayarlayın:`,mqttSettingsPath:`Ayarlar → Ağ → MQTT Yayınlama`,mqttNotConfiguredSuffix:`(yayınlamayı etkinleştirmenize gerek yok, yalnızca broker ayrıntılarını doldurun).`,mqttMonitorOnlyDescription:`MQTT prizleri MQTT aboneliği aracılığıyla güç/enerji verisi alır. Açma/kapama kontrolü kullanılamaz - MQTT brokerınızı veya ev otomasyon sisteminizi kullanın.`,powerMonitoring:`Güç İzleme`,energyMonitoring:`Enerji İzleme`,stateMonitoring:`Durum İzleme`,optional:`isteğe bağlı`,topic:`Konu`,jsonPath:`JSON Yolu`,multiplier:`Çarpan`,onValue:`ON Değeri`,mqttPowerHint:`JSON yolu JSON yükten değer çıkarır (örn., "power_l1"). Konu ham sayısal değerler yayınlıyorsa boş bırakın.
 mW→W için 0.001, kW→W için 1000 çarpanı kullanın.`,mqttEnergyHint:`JSON yolu JSON yükten değer çıkarır. Ham değerler için boş bırakın.
 Wh→kWh için 0.001, MWh→kWh için 1000 çarpanı kullanın.`,mqttStateHint:`JSON yolu JSON yükten değer çıkarır. Ham değerler için boş bırakın.
-ON değeri: "ON" anlamına gelen tam string. Otomatik algılama için boş bırakın (ON, true, 1).`,restControl:`Kontrol`,restOnUrl:`AÇ URL'si`,restOffUrl:`KAPAT URL'si`,restOnBody:`AÇ İstek Gövdesi`,restOffBody:`KAPAT İstek Gövdesi`,restMethod:`HTTP Yöntemi`,restHeaders:`Özel Başlıklar (JSON)`,restStatusUrl:`Durum URL'si`,restStatusPath:`Durum JSON Yolu`,restStatusOnValue:`ON Değeri`,restPowerUrl:`Güç URL'si`,restPowerPath:`Güç JSON Yolu`,restPowerMultiplier:`Güç Çarpanı`,restEnergyUrl:`Enerji URL'si`,restEnergyPath:`Enerji JSON yolu (bugün)`,restEnergyTotalPath:`Enerji JSON yolu (toplam sayaç)`,restEnergyTotalMultiplier:`Toplam sayaç çarpanı`,restEnergyTotalPathHint:`örn. aenergy.total`,restEnergyTotalHint:`Birçok priz — tüm Shelly'ler dahil — yalnızca hiç sıfırlanmayan bir toplam sayaç bildirir. Bu değer yukarıdaki alana değil, buraya girilmelidir: bugünün tüketimi olarak okunursa gece yarısı sıfırlanmaz, Dün ve Toplam da boş kalır. Bambuddy Bugün ve Dün değerlerini bundan hesaplar; bunun için bir iki günlük ölçüm gerekir. Shelly watt-saat bildirdiğinden çarpan olarak 0.001 kullanın.`,restEnergyMultiplier:`Enerji Çarpanı`,restUrlRequired:`REST prizleri için en az bir URL (ON veya OFF) gerekli`,restHeadersHint:`örn. {"Authorization": "Bearer your-token"}`,restBodyHint:`örn. ON, {"state": "on"}`,restStatusHint:`Mevcut durumu sorgulamak için URL`,restPathHint:`örn. state veya data.power.status`,restPowerUrlHint:`Güç verisi için ayrı URL (boşsa Durum URL'sini kullanır)`,restEnergyUrlHint:`Enerji verisi için ayrı URL (boşsa Durum URL'sini kullanır)`,restEnergyHint:`Her değer kendi URL'sini kullanabilir veya Durum URL'sine geri dönebilir. Birim dönüşümü için çarpanları kullanın (örn. Wh'yi kWh'ye dönüştürmek için 0.001).`,testConnection:`Bağlantıyı Test Et`,connectionSuccess:`Bağlantı başarılı`,noSwitchesInSwitchbar:`Anahtar çubuğunda anahtar yok`,enableSwitchbarHint:`Ayarlar > Akıllı Prizler'de "Anahtar Çubuğunda Göster"i etkinleştirin`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`E-posta`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`SMTP e-posta bildirimleri`,telegram:`Telegram botu üzerinden bildirimler`,discord:`Webhook üzerinden Discord kanalına gönder`,ntfy:`Ücretsiz, kendi barındırılabilir push bildirimleri`,pushover:`Basit, güvenilir push bildirimleri`,callmebot:`CallMeBot üzerinden ücretsiz WhatsApp bildirimleri`,webhook:`Herhangi bir URL'ye genel HTTP POST`,homeassistant:`Home Assistant gösterge panelinde kalıcı bildirimler`,bark:`Bark ile iOS anlık bildirimleri (kendi sunucunuzda barındırılabilir)`},lastSuccess:`Son: {{date}}`,error:`Hata`,printer:`Yazıcı:`,allPrinters:`Tüm yazıcılar`,sendTestNotification:`Test Bildirimi Gönder`,eventSettings:`Olay Ayarları`,enabled:`Etkin`,sendFromProvider:`Bu sağlayıcıdan bildirim gönder`,printEvents:`Baskı Olayları`,printerStatus:`Yazıcı Durumu`,amsAlarms:`AMS Alarmları`,amsHtAlarms:`AMS-HT Alarmları`,printQueue:`Baskı Kuyruğu`,start:`Başlangıç`,plateCheck:`Plaka Kontrolü`,complete:`Tamamlandı`,failed:`Başarısız`,stopped:`Durduruldu`,progress:`İlerleme`,offline:`Çevrimdışı`,lowFilament:`Az Filament`,maintenance:`Bakım`,amsHumidity:`AMS Nemi`,amsTemp:`AMS Sıcaklığı`,amsDryingSuspended:`Kurutma askıya alındı`,amsHtHumidity:`AMS-HT Nemi`,amsHtTemp:`AMS-HT Sıcaklığı`,bedCooled:`Tabla Soğudu`,firstLayer:`İlk Katman`,quiet:`Sessiz`,digest:`Özet {{time}}`,printStarted:`Baskı Başladı`,plateNotEmpty:`Plaka Boş Değil`,plateNotEmptyDescription:`Baskıdan önce nesneler algılandı`,plateClearRequired:`Tabla onayı gerekli`,plateClearRequiredDescription:`Baskı bitti, kuyruk tabla onayını bekliyor`,plateClear:`Tabla onayı`,printCompleted:`Baskı Tamamlandı`,bedCooledLabel:`Tabla Soğudu`,bedCooledDescription:`Baskıdan sonra tabla eşiğin altına soğudu`,firstLayerCompleteLabel:`İlk Katman Tamamlandı`,firstLayerCompleteDescription:`İlk katman bittiğinde anlık görüntüyle bildir`,missingSpoolAssignmentLabel:`Eksik Makara Ataması`,billingChargeFailedLabel:`Ücretlendirme hatası`,billingChargeFailedDescription:`Baskı maliyetleri kaydedilemediğinde bildirim gönder`,missingSpoolAssignmentDescription:`Baskı başladığında ve gerekli tepsilerin atanmış makarası olmadığında bildir`,printFailed:`Baskı Başarısız`,printStopped:`Baskı Durduruldu`,progressMilestones:`İlerleme Kilometre Taşları`,progressMilestonesDescription:`%25, %50, %75'te bildir`,printerOffline:`Yazıcı Çevrimdışı`,printerError:`Yazıcı Hatası`,aiFailureDetection:`AI Hata Tespiti`,aiFailureDetectionDescription:`Obico AI olası bir baskı hatası tespit ettiğinde bildir`,lowFilamentLabel:`Az Filament`,maintenanceDue:`Bakım Zamanı`,maintenanceDueDescription:`Bakım gerektiğinde bildir`,amsHumidityHigh:`AMS Nemi Yüksek`,amsHumidityHighDescription:`Normal AMS nemi eşiği aşıyor`,amsTemperatureHigh:`AMS Sıcaklığı Yüksek`,amsTemperatureHighDescription:`Normal AMS sıcaklığı eşiği aşıyor`,amsDryingSuspendedTitle:`Otomatik kurutma askıya alındı`,amsDryingSuspendedDescription:`Nem hiçbir zaman eşiğin altına inmediği için bir AMS ünitesinde otomatik kurutmadan vazgeçildi`,amsHtHumidityHigh:`AMS-HT Nemi Yüksek`,amsHtHumidityHighDescription:`AMS-HT nemi eşiği aşıyor`,amsHtTemperatureHigh:`AMS-HT Sıcaklığı Yüksek`,amsHtTemperatureHighDescription:`AMS-HT sıcaklığı eşiği aşıyor`,inventoryAlerts:`Envanter Uyarıları`,stockReorderAlert:`Yeniden Sipariş Uyarısı`,stockReorderAlertDescription:`SKU yeniden sipariş noktasına ulaştı`,stockBreakAlert:`Stok Tükenme Uyarısı`,stockBreakAlertDescription:`Yenileme gelmeden stok tükenecek`,jobAdded:`İş Eklendi`,jobAddedDescription:`İş kuyruğa eklendi`,jobAssigned:`İş Atandı`,jobAssignedDescription:`Model tabanlı iş yazıcıya atandı`,jobStarted:`İş Başladı`,jobStartedDescription:`Kuyruk işi yazdırmaya başladı`,jobWaiting:`İş Bekliyor`,jobWaitingDescription:`İş filament veya yazıcı için bekliyor`,jobSkipped:`İş Atlandı`,jobSkippedDescription:`İş atlandı (önceki başarısız oldu)`,jobFailed:`İş Başarısız`,jobFailedDescription:`İş başlatılamadı`,queueComplete:`Kuyruk Tamamlandı`,queueCompleteDescription:`Tüm kuyruk işleri bitti`,quietHours:`Sessiz Saatler`,noNotificationsDuring:`Bu saatler arasında bildirim yok`,editProviderToChangeQuietHours:`Sessiz saatleri değiştirmek için sağlayıcıyı düzenleyin`,dailyDigest:`Günlük Özet`,batchNotifications:`Bildirimleri tek bir günlük özette topla`,sendAt:`{{time}}'de gönder`,editProviderToChangeDigestTime:`Özet saatini değiştirmek için sağlayıcıyı düzenleyin`,edit:`Düzenle`,deleteProvider:`Bildirim Sağlayıcısını Sil`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz? Bu geri alınamaz.`,delete:`Sil`,addTitle:`Bildirim Sağlayıcısı Ekle`,editTitle:`Bildirim Sağlayıcısını Düzenle`,nameLabel:`Ad *`,namePlaceholder:`Bildirimlerim`,providerTypeLabel:`Sağlayıcı Türü *`,configuration:`Yapılandırma`,testConfiguration:`Yapılandırmayı Test Et`,printerFilter:`Yazıcı Filtresi`,onlyFromPrinter:`Yalnızca bu yazıcının olayları için bildirim gönder`,quietHoursDnd:`Sessiz Saatler (Rahatsız Etme)`,quietStart:`Başlangıç`,quietEnd:`Bitiş`,dailyDigestLabel:`Günlük Özet`,sendDigestAt:`Özeti şu saatte gönder`,digestCollected:`Olaylar toplanacak ve bu saatte tek bir özet olarak gönderilecek`,notificationEvents:`Bildirim Olayları`,progressPercent:`(%25, %50, %75)`,bedCooledAfterPrint:`(baskı tamamlandıktan sonra)`,haSensorAlert:`Yazıcı Sensörü Uyarısı`,haSensorAlertDescription:`(bağlı bir Home Assistant sensörü dikkat gerektiriyor)`,locationHaSensorAlert:`Konum Sensörü Uyarısı`,locationHaSensorAlertDescription:`(bir depolama konumuna bağlı Home Assistant sensörü dikkat gerektiriyor)`,eventPriority:{sectionTitle:`ntfy Önceliği`,helpNtfy:`Her etkin olay için bir öncelik seçin. ntfy uyarıları kademelendirmek için bunları kullanır (ses, görünürlük, push davranışı). Burada ayarlanmamış seviyeler ntfy sunucu varsayılanını kullanır.`,min:`Min`,low:`Düşük`,default:`Varsayılan`,high:`Yüksek`,urgent:`Acil`},cancel:`İptal`,save:`Kaydet`,add:`Ekle`,nameRequired:`Ad gerekli`,fieldRequired:`{{field}} gerekli`,haDataInvalid:`Data alanı geçerli bir JSON nesnesi olmalıdır, örn. {"priority": "high", "ttl": 0}`,phoneNumber:`Telefon Numarası`,apiKey:`API Anahtarı`,serverUrl:`Sunucu URL`,topic:`Konu`,authToken:`Yetkilendirme Belirteci`,userKey:`Kullanıcı Anahtarı`,appToken:`Uygulama Belirteci`,priority:`Öncelik`,pushoverRetry:`Acil yeniden deneme (sn)`,pushoverExpire:`Acil sona erme (sn)`,botToken:`Bot Belirteci`,chatId:`Sohbet ID`,telegramThreadId:`Forum Konu Kimliği`,telegramThreadIdHelp:`İsteğe bağlı. Forum grubundaki tek bir konuya gönderir: konu bağlantısındaki son sayı (t.me/c/.../25). Genel konu için boş bırakın.`,telegramThreadIdInvalid:`Forum konu kimliği bir sayı olmalıdır.`,smtpServer:`SMTP Sunucusu`,smtpPort:`SMTP Portu`,security:`Güvenlik`,authentication:`Kimlik Doğrulama`,username:`Kullanıcı Adı`,password:`Parola`,fromEmail:`Gönderen E-posta`,toEmail:`Alıcı E-posta`,webhookUrl:`Webhook URL`,payloadFormat:`Yük Formatı`,authorization:`Yetkilendirme`,titleFieldName:`Başlık Alanı Adı`,messageFieldName:`Mesaj Alanı Adı`,editTemplate:`Şablonu Düzenle: {{name}}`,titleLabel:`Başlık`,bodyLabel:`Gövde`,titlePlaceholder:`Bildirim başlığı...`,bodyPlaceholder:`Bildirim gövdesi...`,availableVariables:`Kullanılabilir Değişkenler`,clickToInsert:`Gövdede imleç konumuna eklemek için tıklayın`,livePreview:`Canlı Önizleme`,hide:`Gizle`,show:`Göster`,loadingPreview:`Önizleme yükleniyor...`,enterTemplateContent:`Önizlemeyi görmek için şablon içeriğini girin`,titlePreview:`Başlık:`,bodyPreview:`Gövde:`,resetToDefault:`Varsayılana Sıfırla`,titleRequired:`Başlık gerekli`,bodyRequired:`Gövde gerekli`,notificationLog:`Bildirim Günlüğü`,showFailedOnly:`Yalnızca başarısız`,last24Hours:`Son 24 saat`,last7Days:`Son 7 gün`,last30Days:`Son 30 gün`,last90Days:`Son 90 gün`,justNow:`Az önce`,noFailedNotifications:`Başarısız bildirim yok`,noNotificationsLogged:`Kaydedilen bildirim yok`,unknownProvider:`Bilinmeyen Sağlayıcı`,logTitle:`Başlık`,logMessage:`Mesaj`,logError:`Hata`,logProvider:`Sağlayıcı: {{type}}`,logTime:`Saat: {{time}}`,refresh:`Yenile`,clearOld:`Eskileri Temizle`,statsSummary:`Son {{days}} gün:`,statsNotifications:`bildirim`,statsSent:`{{count}} gönderildi`,statsFailed:`{{count}} başarısız`,eventTypes:{print_start:`Baskı Başladı`,print_complete:`Baskı Tamamlandı`,print_failed:`Baskı Başarısız`,print_stopped:`Baskı Durduruldu`,print_progress:`İlerleme`,printer_offline:`Yazıcı Çevrimdışı`,printer_error:`Yazıcı Hatası`,filament_low:`Az Filament`,maintenance_due:`Bakım Zamanı`,test:`Test`},userEmail:{title:`Bildirimler`,emailNotifications:`E-posta Bildirimleri`,emailNotificationsDesc:`Kendi baskı işleriniz için e-posta bildirimleri alın. E-postalar Gelişmiş Kimlik Doğrulamada yapılandırılan sistem SMTP ayarları kullanılarak gönderilir.`,sendingTo:`Bildirimler şuraya gönderilecek`,noEmailWarning:`Hesabınızın e-posta adresi yok. Eklemek için bir yöneticiyle iletişime geçin.`,printJobNotifications:`Baskı İşi Bildirimleri`,printJobNotificationsDesc:`Gönderdiğiniz baskı işleri için hangi olayların e-posta bildirimlerini tetikleyeceğini seçin.`,printJobStarts:`Baskı İşi Başlar`,printJobStartsDesc:`Baskı işiniz başladığında bildirim alın.`,printJobFinishes:`Baskı İşi Biter`,printJobFinishesDesc:`Baskı işiniz başarıyla tamamlandığında bildirim alın.`,printErrors:`Baskı Hataları`,printErrorsDesc:`Baskı işiniz başarısız olduğunda veya bir hatayla karşılaştığında bildirim alın.`,printJobStops:`Baskı İşi Durur`,printJobStopsDesc:`Baskı işiniz iptal edildiğinde veya durdurulduğunda bildirim alın.`,saveSuccess:`Bildirim tercihleri kaydedildi.`,saveError:`Bildirim tercihleri kaydedilemedi.`}},richTextEditor:{bold:`Kalın`,italic:`İtalik`,underline:`Altı Çizili`,bulletList:`Madde İşaretli Liste`,numberedList:`Numaralı Liste`,alignLeft:`Sola Hizala`,alignCenter:`Ortaya Hizala`,alignRight:`Sağa Hizala`,addLink:`Bağlantı Ekle`,removeLink:`Bağlantıyı Kaldır`},externalLinks:{title:`Kenar çubuğu bağlantıları`,sidebarLayout:`Kenar çubuğu`,sidebarLayoutDescription:`Yerleşik sayfaları gösterin veya gizleyin, harici bağlantılar ekleyin ve kenar çubuğu gezinmesini yeniden sıralamak için öğeleri sürükleyin.`,systemPages:`Bambuddy sayfaları`,externalLinks:`Harici bağlantılar`,visibleInSidebar:`Kenar çubuğunda görünür`,hiddenFromSidebar:`Kenar çubuğunda gizli`,requiredInSidebar:`Kenar çubuğunda gerekli`,hidePage:`Sayfayı gizle`,showPage:`Sayfayı göster`,settingsCannotBeHidden:`Ayarlar gizlenemez`,noLinksConfigured:`Yapılandırılmış harici bağlantı yok`,deleteLink:`Bağlantıyı Sil`,removeCustomIcon:`Özel simgeyi kaldır`,openInNewTab:`Yeni sekmede aç`,placeholders:{linkName:`Bağlantım`}},keyboardShortcuts:{title:`Klavye Kısayolları`,navigation:`Navigasyon`,archivesSection:`Arşivler`,kProfilesSection:`K-Profilleri`,generalSection:`Genel`,shortcuts:{goToPrinters:`Yazıcılara Git`,goToArchives:`Arşivlere Git`,goToQueue:`Kuyruğa Git`,goToStats:`İstatistiklere Git`,goToProfiles:`Bulut Profillerine Git`,goToSettings:`Ayarlara Git`,focusSearch:`Aramaya odaklan`,openUploadModal:`Yükleme modalini aç`,clearSelection:`Seçimi temizle / odağı kaldır`,contextMenu:`Kartlarda bağlam menüsü`,refreshProfiles:`Profilleri yenile`,newProfile:`Yeni profil`,exitSelectionMode:`Seçim modundan çık`,showHelp:`Bu yardımı göster`},footer:`Kapatmak için Esc'ye basın veya dışarı tıklayın`},notificationLog:{title:`Bildirim Günlüğü`,events:{printStarted:`Baskı Başladı`,printComplete:`Baskı Tamamlandı`,printFailed:`Baskı Başarısız`,printStopped:`Baskı Durduruldu`,progress:`İlerleme`,printerOffline:`Yazıcı Çevrimdışı`,printerError:`Yazıcı Hatası`,lowFilament:`Az Filament`,maintenanceDue:`Bakım Zamanı`,test:`Test`},timeAgo:{justNow:`Az önce`,minutesAgo:`{{minutes}}dk önce`,hoursAgo:`{{hours}}sa önce`}},restoreBackup:{title:`Yedeği Geri Yükle`,restoring:`Geri yükleniyor...`,restoreComplete:`Geri Yükleme Tamamlandı`,restoreFailed:`Geri Yükleme Başarısız`,importSettings:`Ayarları bir yedek dosyasından içe aktar`,pleaseWait:`Verileriniz geri yüklenirken lütfen bekleyin`,clickToSelect:`Yedek dosyası seçmek için tıklayın (.json veya .zip)`,howDuplicateHandling:`Yinelenen yönetiminin nasıl çalıştığı:`,categories:{printers:`Yazıcılar`,smartPlugs:`Akıllı Prizler`,notificationProviders:`Bildirim Sağlayıcıları`,filaments:`Filamentler`,archives:`Arşivler`,pendingUploads:`Bekleyen Yüklemeler`,settingsTemplates:`Ayarlar ve Şablonlar`},matchingInfo:{printers:`seri numarasına göre eşleşti`,smartPlugs:`IP adresine göre eşleşti`,notificationProviders:`ada göre eşleşti`,filaments:`ad + tür + markaya göre eşleşti`,archives:`içerik hash'ine göre eşleşti`,pendingUploads:`dosya adına göre eşleşti`,settingsTemplates:`her zaman üzerine yazılır`},replaceExisting:`Mevcut veriyi değiştir`,keepExisting:`Mevcut veriyi koru`,replaceDescription:`Zaten mevcut olan öğeleri yedek verisiyle üzerine yaz`,keepDescription:`Yalnızca zaten mevcut olmayan öğeleri geri yükle`,caution:`Dikkat:`,cautionText:`Üzerine yazma, mevcut yapılandırmalarınızı yedek verisiyle değiştirecek. Güvenlik için yazıcı erişim kodları asla üzerine yazılmaz.`,itemsRestored:`Geri Yüklenen Öğeler`,itemsSkipped:`Atlanan Öğeler`,restored:`Geri yüklendi`,skipped:`Atlandı (zaten mevcut)`,filesLabel:`Dosyalar (3MF, küçük resimler, vb.)`,newApiKeysGenerated:`Yeni API Anahtarları Oluşturuldu`,newApiKeysWarning:`Bu anahtarlar yalnızca bir kez gösterilir. Şimdi kopyalayın!`,processingBackup:`Yedek dosyası işleniyor...`,noDataFound:`Yedek dosyasında geri yüklenecek veri bulunamadı.`,failedToRestore:`Yedek geri yüklenemedi. Lütfen dosya formatını kontrol edin.`},backupExport:{title:`Yedeği Dışa Aktar`,selectData:`Dahil edilecek veriyi seçin`,selectAll:`Tümünü Seç`,selectNone:`Hiçbirini Seçme`,categoryDescriptions:{settings:`Dil, tema, güncelleme tercihleri`,notifications:`ntfy, Pushover, Discord, vb.`,templates:`Özel mesaj şablonları`,smartPlugs:`Tasmota priz yapılandırmaları`,externalLinks:`Harici servislere kenar çubuğu bağlantıları`,printers:`Yazıcı bilgisi (erişim kodları hariç)`,plateDetection:`Boş plaka referans görüntüleri`,filaments:`Filament türleri ve maliyetleri`,maintenance:`Özel bakım programları`,archives:`Tüm baskı verileri + dosyalar (3MF, küçük resimler, fotoğraflar)`,projects:`Projeler, BOM öğeleri ve ekler`,pendingUploads:`İnceleme bekleyen sanal yazıcı yüklemeleri`,apiKeys:`Webhook API anahtarları (içe aktarımda yeni anahtarlar oluşturulur)`},requiresPrinters:`Yazıcıların seçili olması gerekir`,zipFileWarning:`ZIP dosyası oluşturulacak.`,zipFileDescription:`Tüm 3MF dosyalarını, küçük resimleri, zaman atlamalı videoları ve fotoğrafları içerir. Bu biraz zaman alabilir ve büyük bir dosya oluşturabilir.`,includeAccessCodes:`Erişim Kodlarını Dahil Et`,includeAccessCodesDescription:`Başka bir makineye aktarmak için`,includeAccessCodesWarning:`Erişim kodları düz metin olarak dahil edilecek. Bu yedek dosyasını güvende tutun!`,categoriesSelected:`{{selectedCount}} kategori seçildi`},pendingUploads:{placeholders:{notes:`Bu baskı hakkında notlar ekleyin...`},discardUpload:`Yüklemeyi At`,archiveAllUploads:`Tüm Yüklemeleri Arşivle`,discardAllUploads:`Tüm Yüklemeleri At`,archive:`Arşivle`,timeAgo:{justNow:`Az önce`,minutesAgo:`{{minutes}}dk önce`,hoursAgo:`{{hours}}sa önce`,daysAgo:`{{days}}g önce`}},apiBrowser:{placeholders:{requestBody:`JSON istek gövdesi...`,searchEndpoints:`Uç noktalarda ara...`}},configureAmsSlot:{title:`AMS Yuvasını Yapılandır`,slotConfigured:`Yuva Yapılandırıldı!`,configuringSlot:`Yuva yapılandırılıyor:`,slotLabel:`{{ams}} Yuva {{slot}}`,searchPresets:`Ön ayarlarda ara...`,colorPlaceholder:`Renk adı veya hex (örn., kahverengi, FF8800)`,clearCustomColor:`Özel rengi temizle`,noCloudPresets:`Bulut ön ayarı yok. Senkronize etmek için Bambu Cloud'a giriş yapın.`,noPresetsAvailable:`Kullanılabilir ön ayar yok. Bambu Cloud'a giriş yapın veya yerel profilleri içe aktarın.`,noMatchingPresets:`Eşleşen ön ayar bulunamadı.`,custom:`Özel`,builtin:`Yerleşik`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Ayarlar yazıcıya gönderildi`,filamentProfile:`Filament Profili`,kProfileLabel:`K Profili (Basınç İlerlemesi)`,filteringFor:`Şu için filtreleniyor: {{material}}`,noKProfile:`K profili yok (varsayılan 0.020 kullan)`,noMatchingKProfiles:`Eşleşen K profili bulunamadı. Varsayılan K=0.020 kullanılacak.`,otherKProfiles:`Bu yazıcıdaki diğer K profilleri`,selectFilamentFirst:`Önce bir filament profili seçin`,kFromCalibration:`Yazıcı kalibrasyonundan K={{value}}`,customColorLabel:`Özel Renk (isteğe bağlı)`,presetColors:`{{name}} renkleri:`,showLessColors:`Daha az renk göster`,showMoreColors:`Daha fazla renk göster`,clear:`Temizle`,hexLabel:`Hex: #{{hex}}`,resetting:`Sıfırlanıyor...`,resetSlot:`Yuvayı Sıfırla`,cancel:`İptal`,configuring:`Yapılandırılıyor...`,configureSlot:`Yuvayı Yapılandır`},githubBackup:{title:`Git Yedekleme`,history:`Geçmiş`,downloadBackup:`Yedeği İndir`,restoreBackup:`Yedeği Geri Yükle`,noBackupsYet:`Henüz yedek yok`},emailSettings:{placeholders:{fromName:`BamBuddy`}},tagManagement:{searchTags:`Etiketlerde ara...`,renameTag:`Etiketi yeniden adlandır`,deleteTag:`Etiketi sil`},notificationTemplates:{placeholders:{title:`Bildirim başlığı...`,body:`Bildirim gövdesi...`}},batchTag:{placeholders:{newTag:`Yeni etiket girin...`}},photoGallery:{deletePhoto:`Fotoğrafı Sil`},filamentHoverCard:{copySpoolUuid:`Makara UUID'sini kopyala`},kProfilesView:{hasNote:`Notu var`,copyProfile:`Profili kopyala`},layout:{openMenu:`Menüyü aç`,noPermissionSystemInfo:`Sistem bilgisini görüntüleme izniniz yok`},dashboard:{dragToReorder:`Yeniden sıralamak için sürükleyin`,hideWidget:`Widget'ı gizle`},notificationProviderCard:{deleteNotificationProvider:`Bildirim Sağlayıcısını Sil`},fileManagerModal:{closeFileManager:`Dosya yöneticisini kapat`,sortFiles:`Dosyaları sırala`,goToParentFolder:`Üst klasöre git`,threeView:`3B Görünüm`},embeddedCameraViewer:{refreshStream:`Akışı yenile`,close:`Kapat`,zoomOut:`Uzaklaştır`,resetZoom:`Yakınlaştırmayı sıfırla`,zoomIn:`Yakınlaştır`,dragToResize:`Yeniden boyutlandırmak için sürükleyin`},timelapseViewer:{skipBack5s:`5 sn geri al`,skipForward5s:`5 sn ileri al`},notificationProviders:{descriptions:{email:`SMTP e-posta bildirimleri`,telegram:`Telegram botu üzerinden bildirimler`,discord:`Webhook üzerinden Discord kanalına gönder`,ntfy:`Ücretsiz, kendi barındırılabilir push bildirimleri`,pushover:`Basit, güvenilir push bildirimleri`,callmebot:`CallMeBot üzerinden ücretsiz WhatsApp bildirimleri`,webhook:`Herhangi bir URL'ye genel HTTP POST`}},logViewer:{searchPlaceholder:`Mesaj veya günlükçü adı ara...`,noLogEntries:`Günlük kaydı bulunamadı`},switchbarPopover:{noSwitchesInSwitchbar:`Anahtar çubuğunda anahtar yok`},projectPageModal:{placeholders:{title:`Başlık`,designer:`Tasarımcı`,license:`Lisans`,description:`Açıklama girin...`,profileTitle:`Profil Başlığı`,profileDescription:`Profil açıklaması...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`Bekliyor`,justNow:`Az önce`,now:`Şimdi`,minsAgo:`{{count}}dk önce`,inMins:`{{count}}dk sonra`,hoursAgo:`{{count}}sa önce`,inHours:`{{count}}sa sonra`,daysAgo:`{{count}}g önce`,inDays:`{{count}}g sonra`},spoolbuddy:{nav:{dashboard:`Gösterge Paneli`,ams:`AMS`,inventory:`Envanter`,writeTag:`Yaz`,settings:`Ayarlar`},status:{nfcReady:`NFC Hazır`,nfcOff:`NFC Kapalı`,offline:`Çevrimdışı`,online:`Çevrimiçi`,noPrinters:`Yazıcı yok`,deviceOffline:`Cihaz Çevrimdışı`,waitingConnection:`Cihaz bağlantısı bekleniyor...`,systemReady:`Sistem Hazır`,status:`Durum`},dashboard:{readyToScan:`Taramaya hazır`,idleMessage:`Tanımlamak için bir makarayı tartıya yerleştirin`,nfcHint:`NFC etiketi otomatik olarak okunacak`,device:`Cihaz`,syncWeight:`Ağırlığı Senkronize Et`,weightSynced:`Senkronize edildi!`,unknownTag:`Bilinmeyen Etiket`,newTag:`Yeni Etiket Algılandı`,onScale:`tartıda`,linkSpool:`Makaraya Bağla`,linkTagTitle:`Etiketi Makaraya Bağla`,linkTag:`Etiketi Bağla`,selectSpool:`Bu etiketi bağlamak için bir makara seçin:`,noUntagged:`Etiketsiz makara bulunamadı`,tagDetected:`Etiket algılandı`,noTag:`Etiket yok`,tagId:`Etiket`,grossWeight:`Brüt ağırlık`,spoolSize:`Makara boyutu`,close:`Kapat`,currentSpool:`Mevcut Makara`,plateReady:`Plaka hazır: {{name}}`,plateReadyLabel:`Temizlenmeye hazır plakalar`,plateClearAction:`Temizle`,plateClearedToast:`Plaka temizlendi olarak işaretlendi`,plateClearFailed:`Plaka temizlendi olarak işaretlenemedi`},modal:{spoolDetected:`Makara Algılandı`,assignToAms:`AMS'e Ata`,syncWeight:`Ağırlığı Senkronize Et`,weightSynced:`Senkronize edildi!`,syncing:`Senkronize ediliyor...`,newTagDetected:`Yeni Etiket Algılandı`,addToInventory:`Envantere Ekle`,assignToAmsTitle:`AMS'e Ata`,selectSlot:`Bir yuva seçin`,assign:`Ata`,assigning:`Atanıyor...`,assignSuccess:`Atandı!`,assignPendingInsert:`Atandı. Makarayı yerleştirdiğinizde yuva yapılandırılacak.`,assignError:`Makara atanamadı. Lütfen tekrar deneyin.`,noPrinterSelected:`Bir yazıcı seçin...`,noAmsDetected:`Bu yazıcıda AMS algılanmadı`,slot:`Yuva`},weight:{noReading:`Okuma yok`,stable:`Kararlı`,measuring:`Ölçülüyor...`,tare:`Dara`,calibrate:`Kalibre Et`},spool:{remaining:`Kalan`,material:`Malzeme`,brand:`Marka`,color:`Renk`,coreWeight:`Çekirdek`,labelWeight:`Etiket`,scaleWeight:`Tartı`,netWeight:`Net`,lastUsed:`Son kullanım`,unknownColor:`Bilinmeyen renk`},ams:{noData:`AMS algılanmadı`,connectAms:`Filament yuvalarını görmek için bir AMS bağlayın`,noPrinter:`Yazıcı seçilmedi`,selectPrinter:`Üst çubuktan bir yazıcı seçin`,printerDisconnected:`Yazıcı bağlantısı kesildi`,humidity:`Nem`,level:`Seviye`,active:`Aktif`,slot:`Yuva`,empty:`Boş`},inventory:{search:`Makaralarda ara...`,empty:`Envanterde makara yok`,noResults:`Eşleşen makara yok`,spools:`makara`,addSpool:`Makara Ekle`},settings:{tabDevice:`Cihaz`,tabDisplay:`Görüntü`,tabScale:`Tartı`,tabUpdates:`Güncellemeler`,nfcReader:`NFC Okuyucu`,type:`Tür`,connection:`Bağlantı`,notConnected:`N/A`,deviceInfo:`Cihaz Bilgisi`,hostname:`Ana Bilgisayar`,uptime:`Çalışma Süresi`,systemConfig:`Arka Uç ve Kimlik Doğrulama`,backendUrl:`Bambuddy Arka Uç URL'si`,apiToken:`API Belirteci`,apiTokenPlaceholder:`API belirtecini girin`,saveConfig:`Yapılandırmayı Kaydet`,systemQueued:`Yapılandırma kuyruğa alındı.`,nfcDiagnostic:`NFC Tanılaması`,scaleDiagnostic:`Tartı Tanılaması`,readTagDiagnostic:`Etiket Okuma Tanılaması`,testNfc:`Okuyucuyu test et`,testScale:`Doğruluğu test et`,testReadTag:`Etiket oku`,systemFieldsRequired:`Arka uç URL'si gerekli.`,brightness:`Parlaklık`,saved:`Kaydedildi`,noBacklight:`DSI arka ışık algılanmadı. Parlaklık kontrolü DSI ekran gerektirir.`,screenBlank:`Ekran Kapanma Zaman Aşımı`,screenBlankDesc:`Hareketsizlik sonrası ekran kapanır. Uyandırmak için dokunun.`,displayNote:`Parlaklık bir yazılım filtresi olarak uygulanır.`,scaleCalibration:`Tartı Kalibrasyonu`,currentWeight:`Mevcut ağırlık`,tareOffset:`Dara`,calFactor:`Faktör`,knownWeight:`Bilinen ağırlık`,calStep1:`Tartıdan tüm öğeleri kaldırın ve Sıfır Ayarla'ya basın.`,calStep2:`Bilinen ağırlığı tartıya yerleştirin.`,setZero:`Sıfır Ayarla`,calibrateNow:`Kalibre Et`,calibrated:`Kalibre edildi`,tareSet:`Dara komutu gönderildi. Cihaz bekleniyor...`,tareComplete:`Dara tamam!`,tareTimedOut:`Dara zaman aşımına uğradı — SpoolBuddy daemon çalışıyor mu?`,tareFailed:`Dara komutu gönderilemedi`,zeroSet:`Sıfır noktası ayarlandı. Bilinen ağırlığı tartıya yerleştirin.`,calibrationDone:`Kalibrasyon tamamlandı!`,calibrationFailed:`Kalibrasyon başarısız`,lastCalibrated:`Son kalibrasyon`,stable:`Kararlı`,settling:`Sabitleniyor...`,firmware:`Firmware`,scale:`Tartı`,noDevice:`SpoolBuddy cihazı bulunamadı`,daemonVersion:`Daemon Sürümü`,currentVersion:`Mevcut`,versionPending:`Daemon bekleniyor...`,checking:`Kontrol ediliyor...`,checkUpdates:`Güncellemeleri Kontrol Et`,updateAvailable:`Güncelleme mevcut`,updateInstructions:`SSH üzerinden güncelle: yükseltmek için SpoolBuddy yükleme betiğini çalıştırın.`,upToDate:`Güncel`,includeBeta:`Beta sürümleri dahil et`},writeTag:{tabExisting:`Mevcut Makara`,tabNew:`Yeni Makara`,tabReplace:`Etiketi Değiştir`,searchPlaceholder:`Malzeme, renk, marka ile ara...`,noUntaggedSpools:`Etiketsiz makara yok`,noTaggedSpools:`Etiketli makara yok`,selectSpool:`Bir makara seçin, ardından okuyucuya boş bir NTAG yerleştirin`,placeTag:`Okuyucuya bir NTAG yerleştirin`,tagReady:`Etiket algılandı — yazmaya hazır`,writeTag:`Etiketi Yaz`,replaceTag:`Etiketi Değiştir`,writing:`Etiket yazılıyor...`,waiting:`SpoolBuddy bekleniyor...`,writeSuccess:`Etiket başarıyla yazıldı!`,writeFailed:`Yazma başarısız`,queueFailed:`Yazma komutu kuyruğa alınamadı`,tryAgain:`Tekrar Dene`,cancel:`İptal`,replaceWarning:`Eski etiket bağlantısı kaldırılacak. Yeni etiket yerini alacak.`,deviceOffline:`SpoolBuddy çevrimdışı`,material:`Malzeme`,colorName:`Renk Adı`,color:`Renk`,brand:`Marka`,weight:`Ağırlık (g)`,createSpool:`Makara Oluştur`,creating:`Oluşturuluyor...`,spoolCreated:`Makara oluşturuldu! Yazmaya hazır.`,createFailed:`Makara oluşturulamadı`,incompleteDataWarning:`Etiket eksik Spoolman verisiyle yazıldı`},quickMenu:{printerPower:`Yazıcı Gücü`,systemControls:`Sistem`,restartDaemon:`Daemon'u Yeniden Başlat`,restartBrowser:`Tarayıcıyı Yeniden Başlat`,reboot:`Yeniden Başlat`,shutdown:`Kapat`,swipeToClose:`Kapatmak için aşağı kaydır`,confirmTitle:`Onayla`,confirmShutdown:`SpoolBuddy'yi kapatmak istediğinizden emin misiniz? Tekrar açmak için fiziksel erişime ihtiyacınız olacak.`,confirmReboot:`SpoolBuddy'yi yeniden başlatmak istediğinizden emin misiniz?`,confirmRestartDaemon:`SpoolBuddy daemon yeniden başlatılsın mı? NFC ve tartı geçici olarak kullanılamayacak.`,confirmRestartBrowser:`Kiosk tarayıcısı yeniden başlatılsın mı? Ekran kısa bir süre kararacak.`,confirm:`Onayla`,confirmPlugOn:`{{name}} açılsın mı?`,confirmPlugOff:`{{name}} kapatılsın mı?`,turnOn:`Aç`,turnOff:`Kapat`}},diagnostic:{modalTitle:`Bağlantı tanılaması — {{name}}`,running:`Tanılama çalışıyor...`,runningElapsed:`Tanılama çalışıyor... ({{elapsed}}s)`,waitingForReportHint:`Yazıcının durum raporu yayınlamasını bekliyor — bu işlem en fazla {{max}} saniye sürebilir.`,runFailed:`Tanılama çalıştırılamadı: {{error}}`,retry:`Tekrar çalıştır`,runButton:`Tanılamayı çalıştır`,sectionTitle:`Bağlantı Tanılaması`,sectionDescription:`Bir yazıcının neden bağlanmadığını veya yazdırmadığını kontrol edin — port erişilebilirliği, LAN geliştirici modu, Docker ağ modu ve kimlik bilgileri.`,noPrinters:`Yapılandırılmış yazıcı yok.`,overall:{ok:`Sorun bulunamadı — yazıcı bağlantısı sağlıklı görünüyor.`,warnings:`Yazıcı çalışmalı, ancak bazı şeyler dikkat gerektiriyor.`,problems:`Yazıcının neden bağlanmadığını veya yazdırmadığını açıklayan sorunlar bulundu.`},check:{port_mqtt:{title:`Kontrol portu (MQTT 8883)`,pass:`Erişilebilir — yazıcı kontrol bağlantılarını kabul ediyor.`,fail:`Port 8883 erişilemez. Yazıcı kapalı, farklı bir IP adresinde veya bir güvenlik duvarı engelliyor. Yazıcı IP'sini ve hiçbir şeyin port 8883'ü engellemediğini doğrulayın.`},port_ftps:{title:`Dosya aktarım portu (FTPS 990)`,pass:`Erişilebilir — baskı dosyaları gönderme çalışacak.`,warn:`Port 990 erişilemez. İzleme yine çalışabilir, ancak yazıcıya baskı gönderme başarısız olacak. Port 990'ın engellenmediğinden emin olun.`,warn_no_tls:`Port 990 açık, ancak yazıcının dosya hizmeti TLS el sıkışmasını tamamlamıyor. Baskı dosyaları, kapak görselleri ve timelapse videoları alınamadığı için arşivler boş kalır. Yazıcıyı yeniden başlatın — portun engelini kaldırmak işe yaramaz.`},external_storage:{title:`Gönderilen dosyaları harici depolamada sakla (kurulum adımı 4)`,pass:`Yazıcı bu seçeneğin açık olduğunu bildiriyor — gönderilen dosyalar SD kartta saklanacak ve arşivler küçük resim ve dilimleyici meta verileri içerecek.`,fail:`Yazıcı bu seçeneğin kapalı olduğunu bildiriyor. "Gönderilen dosyaları harici depolamada sakla" seçeneğini etkinleştirin — yeni donanım yazılımlarında (P2S 01.02 / Bambu Studio 2.6+) düğme yazıcının Baskı Ayarları'nda; eski sürümlerde Bambu Studio / OrcaSlicer'in Cihaz sekmesindedir. Bu seçenek olmadan, arşivlenen her baskıda küçük resim ve dilimleyici meta verisi olmayacak.`,skip:`Kontrol edilmedi — etkin bir MQTT bağlantısı gerekli. Bu ayarın yalnızca dilimleyicide bulunduğu eski dilimleyicilerde yazıcı bunu bildirmez, bu nedenle seçenek kapalı olsa bile bu kontrol geçer — kurulum adımı 4'ü manuel olarak doğrulayın.`,skip_unsupported_model:`Bu modelde SD yuvası var ancak seçeneği açmanın bir yolu yok — mevcut P1 serisi bellenim, Bambu Studio'da bu anahtarı göstermiyor ve yazıcının ekranı yok. Burada düzeltilecek bir şey yok; Bambu Lab bellenim desteği ekleyene kadar arşivlenen baskılarda küçük resimler ve dilimleyici meta verileri eksik olabilir.`,fail_no_media:`Seçenek açık, ancak yazıcı yuvasında kart veya bellek bildirmiyor, dolayısıyla gönderilen dosyaların gideceği bir yer yok. Bir tane takıp yeniden yazdırın — o zamana kadar arşivlenen her baskıda küçük resim ve dilimleyici meta verileri eksik olacak.`,warn_internal_storage:`Seçenek açık ve depolama takılı, ancak son baskı yine de Bambuddy'nin okuyamadığı dahili depolamaya gitti. H2 serisi, P2S ve X2D'de Bambu Studio'nun «Yazdır» düğmesi bu ayardan bağımsız olarak her zaman oraya gönderir. Baskılar adları ve süreleriyle arşivlenir, ancak küçük resim ve dilimleyici meta verileri olmadan. Eksiksiz arşivler için baskıları Bambuddy üzerinden başlatın, OrcaSlicer ile dilimleyin ya da Bambu Studio'da «Gönder» ile «Harici» seçip baskıyı sonrasında başlatın.`,warn_internal_history:`Seçenek açık ve depolama takılı, ancak son baskı yazıcıda zaten bulunan bir dosyadan çalıştı — ekranından yeniden baskı, Handy üzerinden başlatma ya da daha önce gönderilmiş bir dosya. Bu kitaplık, Bambuddy'nin okuyamadığı dahili depolamada durur ve o baskı için hiçbir şey gönderilmediğinden hiçbir ayar bunu değiştirmez. Adı ve süreleriyle yine arşivlenir, ama küçük resim ve dilimleyici meta verileri olmadan. Eksiksiz arşivler için baskıları Bambuddy'den başlatın ya da dilimleyiciden gönderin.`},port_rtsps:{title:`Kamera portu ({{protocol}} {{port}})`,pass:`Erişilebilir — kamera akışı çalışacak.`,warn:`Port {{port}} erişilemez. Canlı kamera görünümü çalışmayacak. Bu, baskıyı etkilemez.`},macos_local_network:{title:`macOS Yerel Ağ izni`,pass:`macOS, Bambuddy’nin yerel ağa erişmesine izin veriyor.`,warn_unsigned:`Bambuddy’yi çalıştıran Python’un kod imzası yok; bu yüzden macOS Yerel Ağ iznini bağlayacak bir kimlik bulamıyor ve yazıcıya giden tüm bağlantıları hata vermeden, sormadan sessizce düşürüyor. İmzalamayı yapan Bambuddy güncelleme betiğini (install/update_macos.sh) çalıştırın, ardından Bambuddy’yi yeniden başlatın. Yorumlayıcı: {{executable}}`,warn_permission:`Yazıcı açıksa ve bu adresten erişilebiliyorsa Sistem Ayarları > Gizlilik ve Güvenlik > Yerel Ağ bölümünü açıp Bambuddy’nin Python’unun etkin olduğundan emin olun. Etkin değilse macOS yerel bağlantıları sessizce düşürür; ayrıca Python güncellemesi eski izni geride bırakabilir.`},network_mode:{title:`Konteyner ağ modu`,genericRuntime:`bir konteyner`,pass:`{{runtime}} içinde ana bilgisayar ağıyla çalışıyor.`,warn:`Bambuddy, {{runtime}} içinde köprü ağıyla çalışıyor. Yazıcı keşfi ve Sanal Yazıcı ana bilgisayar ağı gerektirir — konteyneri ana bilgisayar ağıyla yeniden oluşturun (docker-compose için "network_mode: host", Podman için "--network=host").`,skip:`Bir konteyner içinde çalışmıyor — uygulanamaz.`,skip_unknown:`Bambuddy {{runtime}} içinde çalışıyor ancak ağ modu belirlenemedi. Yazıcı keşfi veya Sanal Yazıcı çalışmıyorsa konteyneri ana bilgisayar ağıyla yeniden oluşturun.`,skip_system_container:`Bambuddy, sanal makine gibi doğrudan yerel ağda bulunan bir {{runtime}} sistem konteyneri içinde çalışıyor — uygulanamaz.`},subnet:{title:`Ağ alt ağı`,pass:`Yazıcı ve Bambuddy aynı alt ağda.`,warn:`Yazıcı ({{printer_ip}}) ve Bambuddy ({{host_ip}}) farklı alt ağlarda. Alt ağlar arasında yönlendirme yapılandırılmazsa birbirlerine erişemeyebilirler.`,skip:`Alt ağ belirlenemedi — atlandı.`},mqtt_auth:{title:`Yazıcı kimlik bilgileri`,pass:`Yazıcı bağlantıyı kabul etti.`,fail:`Yazıcıya erişilebiliyor ancak Bambuddy ona bağlı değil. Büyük olasılıkla erişim kodu veya seri numarası yanlış — erişim kodu, Yalnızca LAN veya Geliştirici Modu her açılıp kapatıldığında değişir, bu yüzden yazıcı ekranından yeniden kopyalayın. Yeniden başlamakta olan veya eşzamanlı bağlantı sınırına ulaşmış bir yazıcı da aynı görünür.`,fail_auth_rejected:`Yazıcı, Bambuddy'nin kimlik bilgilerini reddetti. Erişim kodu veya seri numarası yanlış — erişim kodu, Yalnızca LAN veya Geliştirici Modu her açılıp kapatıldığında değişir. Yazıcı ekranından yeniden kopyalayın ve yazıcı ayarlarına kaydedin.`,skip:`Kontrol edilmedi — yazıcıya erişilemedi.`},developer_mode:{title:`LAN Geliştirici Modu`,pass:`Geliştirici Modu etkin.`,fail:`Yazıcıda Geliştirici Modu KAPALI. Yazıcının LAN ayarlarında etkinleştirin — ve OK ile onaylayın. Bu olmadan baskılar başlamayacak.`,skip:`Kontrol edilemedi — yazıcıya canlı bir bağlantı gerektirir.`},printer_publishing:{title:`Yazıcı durum yayını yapıyor`,pass:`Yazıcı durum güncellemelerini yayınlıyor — AMS, filamentler ve K profilleri dilimleyiciye doğru şekilde yansıtılacak.`,fail:`MQTT aracısı bağlantıyı kabul etti, ancak yazıcı hiç durum raporu yayınlamadı. Bu neredeyse her zaman yanlış ya da büyük/küçük harf hatalı bir seri numarasından kaynaklanır — device/<serial>/report konusu büyük/küçük harfe duyarlıdır. Yazıcı ayarlarındaki seri numarasını cihazın ekranındaki ile karşılaştırarak doğrulayın.`,skip:`Kontrol edilemedi — yazıcıya canlı bir bağlantı gerektirir.`}}},systemHealth:{sectionTitle:`Sistem Sağlığı`,sectionDescription:`Bir destek talebine dönüşmeden önce genellikle kendi başınıza düzeltebileceğiniz bilinen sorunlar için son günlükleri tarar.`,rescan:`Yeniden tara`,clean:`Son {{times}} günlük kaydında bilinen sorun bulunamadı.`,logUnavailable:`Dosya günlüğü devre dışı, bu nedenle günlükler taranamıyor. Bu kontrolü kullanmak için dosya günlüğünü etkinleştirin.`,learnMore:`Nasıl düzeltilir`,fixLabel:`Düzeltme:`,occurrences:`{{times}}× görüldü — son {{lastSeen}}'de`,category:{layer8:`Bunu düzeltebilirsiniz`,environment:`Ortam`,bug:`Lütfen bunu bildirin`},signature:{"ftp-auth-rejected":{name:`Yazıcı erişim kodunu reddetti`,cause:`Yazıcı dosya aktarım girişini reddetti. Erişim kodu yanlış veya Geliştirici Modu açılıp kapatıldıktan sonra değişti.`,fix:`Erişim kodunu yazıcı ekranından (LAN ayarları) yeniden kopyalayın ve Bambuddy'deki yazıcının ayarlarında güncelleyin.`},"ftp-connection-timeout":{name:`Dosya aktarım bağlantısı zaman aşımına uğradı`,cause:`Bambuddy yazıcının dosya aktarım portuna (FTPS 990) erişemedi. Port engellendi veya yazıcı kapalı ya da başka bir alt ağda.`,fix:`Bambuddy ile yazıcı arasında hiçbir şeyin port 990'ı engellemediğinden ve her ikisinin de aynı ağda olduğundan emin olun.`},"ftp-ssl-error":{name:`Güvenli dosya aktarım el sıkışması başarısız`,cause:`Yazıcının dosya hizmeti 990 numaralı bağlantı noktasında TLS olmadan yanıt verdi. Dosya sunucusu takılmış durumda: bu, güvenlik duvarı veya firmware sorunu değil, yazıcı kaynaklı bir arızadır.`,fix:`Yazıcıyı yeniden başlatın. O zamana kadar baskı dosyaları, kapak görselleri ve timelapse videoları alınamaz; baskının kendisi etkilenmez.`},"bambu-cloud-captcha":{name:`Bambu Cloud CAPTCHA istiyor`,cause:`Bambu'nun kötüye kullanım koruması bu ağı denetliyor, bu yüzden hiçbir Bambu Cloud oturum açma işlemi tamamlanamıyor. Bu, hesabınıza veya bu kuruluma değil, genel IP adresine bağlıdır.`,fix:`Bekleyin: genellikle birkaç saat içinde kalkar ve tekrarlanan denemeler süreyi uzatır. Bu sırada tarayıcı oturumundan alınan bir erişim belirteciyle bağlanın.`},"mqtt-connection-flapping":{name:`Yazıcı bağlantısı sürekli düşüyor`,cause:`Kontrol bağlantısı (MQTT 8883) tekrar tekrar bağlantısı kesiliyor ve yeniden bağlanıyor — genellikle zayıf bir ağ yolu veya kısmen engellenmiş bir port.`,fix:`Yazıcıdaki Wi-Fi sinyalini kontrol edin, kablolu bağlantı tercih edin ve port 8883'ün güvenilir bir şekilde erişilebilir olduğundan emin olun.`},"camera-connection-refused":{name:`Kamera akışına erişilemez`,cause:`Canlı kameraya RTSPS 322 portunda erişilemedi. Port engellendi veya yazıcıda kamera veya LAN canlı görünümü kapalı.`,fix:`Yazıcıda kamerayı ve LAN canlı görünümünü etkinleştirin ve port 322'nin engellenmediğinden emin olun. Bu, baskıyı etkilemez.`},"database-locked":{name:`Veritabanı yazma çekişmesi`,cause:`SQLite veritabanı yük altında "veritabanı kilitli" hatalarıyla karşılaşıyor — aynı anda birkaç yazıcı çalıştırırken yaygındır.`,fix:`Bambuddy'yi harici bir PostgreSQL veritabanına geçirin. Dokümantasyondaki PostgreSQL kılavuzuna bakın.`}}},vpDiagnostic:{title:`Kurulum kontrolü — {{name}}`,runButton:`Kurulum kontrolünü çalıştır`,running:`Kurulum kontrolü çalışıyor...`,runFailed:`Kurulum kontrolü çalıştırılamadı: {{error}}`,retry:`Tekrar çalıştır`,overall:{ok:`Tüm kontroller geçti — bu sanal yazıcı doğru şekilde kurulmuş.`,warnings:`Sanal yazıcı çalışmalı, ancak bazı şeyler dikkat gerektiriyor.`,problems:`Dilimleyicinin bu sanal yazıcıyı neden göremediğini veya kullanamadığını açıklayan sorunlar bulundu.`},check:{enabled:{title:`Sanal yazıcı etkin`,fail:`Bu sanal yazıcı kapatılmış. Keşfedilebilir hale getirmek için açın.`},running:{title:`Servisler çalışıyor`,fail:`Sanal yazıcı etkin ancak servisleri çalışmıyor. Bambuddy günlüğünü kontrol edin — bir bind IP çakışması veya bir izin hatası genellikle onları durdurur.`},bind_interface:{title:`Bind ağ arayüzü`,fail:`Bind arayüzü ayarlanmamış veya artık bu ana bilgisayarda mevcut değil. Bind Arayüzü açılır menüsünde mevcut bir arayüz seçin.`},access_code:{title:`Erişim kodu ayarlandı`,fail:`Erişim kodu ayarlanmamış. Dilimleyiciye burada ayarladığınız aynı 8 karakterli erişim kodunun verilmesi gerekir.`},target_printer:{title:`Hedef yazıcı`,fail:`Hedef yazıcı seçilmemiş. Proxy modu iletmek için gerçek bir yazıcıya ihtiyaç duyar.`,warn:`Hedef yazıcı şu anda çevrimdışı — yeniden bağlandığında proxy devam edecek.`},port_ftps:{title:`Dosya yükleme servisi (port {{port}})`,fail:`Bind IP'sinin {{port}} portunda hiçbir şey dinlemiyor, bu nedenle dilimleyici dosya yükleyemez. Bu arayüzde bir port çakışması genellikle nedendir.`},port_mqtt:{title:`Kontrol servisi (port {{port}})`,fail:`Bind IP'sinin {{port}} portunda hiçbir şey dinlemiyor, bu nedenle dilimleyici bağlanamaz veya durum gösteremez.`},port_bind:{title:`Keşif servisi (port {{port}})`,fail:`Bind IP'sinin {{port}} portunda hiçbir şey dinlemiyor, bu nedenle dilimleyicinin keşif el sıkışması başarısız oluyor.`},privileged_ports:{title:`Ayrıcalıklı bağlantı noktası bağlama`,fail:`{{port}} numaralı bağlantı noktası 1024 altındadır ve bu hizmetin onu bağlama izni yoktur; yukarıda hiçbir şeyin dinlememesinin nedeni budur. /etc/systemd/system/bambuddy.service dosyasına AmbientCapabilities=CAP_NET_BIND_SERVICE ekleyip yeniden başlatın veya "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))" komutunu çalıştırın. Docker kullanıyorsanız cap_add: [NET_BIND_SERVICE] ekleyin.`},certificate:{title:`TLS sertifikası`,pass:`Sertifika hazır. Bambuddy CA sertifikasının (yukarıda) dilimleyicinizin güven deposuna içe aktarıldığından emin olun.`,fail:`Bu sanal yazıcı için TLS sertifikası eksik. Bambuddy veri dizininin yazılabilir olduğunu kontrol edin.`}}},bugReport:{title:`Hata Bildir`,description:`Açıklama`,descriptionPlaceholder:`Ne ters gitti? Lütfen sorunu tanımlayın...`,email:`E-posta (isteğe bağlı)`,emailPlaceholder:`sizin@email.com`,emailPrivacy:`Sağlanırsa, e-postanız GitHub sorunundaki daraltılmış bir bölümde dahil edilecek, böylece bakımcı takip edebilir.`,screenshot:`Ekran Görüntüsü`,uploadOrPaste:`Bir görüntü yükleyin, yapıştırın veya sürükleyin`,dataCollectedSummary:`Rapora hangi veriler dahil edilir?`,dataIncluded:`Dahil:`,dataIncludedList:`Uygulama sürümü, OS, mimari, Python sürümü, veritabanı istatistikleri (yalnızca sayılar), yazıcı modelleri, nozul sayıları, firmware sürümleri, bağlantı durumu, entegrasyon durumu (Spoolman, MQTT, HA), hassas olmayan ayarlar, ağ arayüzü sayısı, Docker ayrıntıları, bağımlılık sürümleri.`,dataNeverIncluded:`Asla dahil edilmez:`,dataNeverIncludedList:`Yazıcı adları, seri numaraları, erişim kodları, parolalar, IP adresleri, e-posta adresleri, API anahtarları, belirteçler, webhook URL'leri, ana bilgisayar adları veya kullanıcı adları.`,submit:`Gönder`,startLogging:`Hata Ayıklama Kaydını Başlat`,stepEnableLogging:`Hata ayıklama kaydı etkin`,stepReproduce:`Sorunu şimdi yeniden oluşturun`,stepStopLogging:`Durdur ve raporu gönder`,stopAndSubmit:`Durdur ve Gönder`,maxDuration:`{{minutes}} dk sonra otomatik durur`,stoppingLogs:`Günlükler toplanıyor ve gönderiliyor...`,submitting:`Hata raporu gönderiliyor...`,submittingStepConnection:`Yazıcı bağlantı kontrolleri çalıştırılıyor`,submittingStepVirtualPrinters:`Sanal yazıcı kurulum kontrolleri çalıştırılıyor`,submittingStepLogScan:`Son günlüklerde bilinen sorunlar taranıyor`,submittingStepSubmit:`Rapor GitHub'a gönderiliyor`,submitSuccess:`Hata raporu başarıyla gönderildi!`,submitFailed:`Hata raporu gönderilemedi`,diagnosticChecking:`Yazıcı bağlantıları kontrol ediliyor...`,diagnosticHealthy:`Bağlantı kontrolü başarılı — yazıcılarınızda sorun bulunamadı.`,diagnosticSummary:`{{total}} yazıcıdan {{problems}} tanesinde bağlantı sorunu var`,diagnosticIntro:`Bir veya daha fazla yazıcının sorununuza neden olabilecek bir bağlantı sorunu var. Düzeltmeyi görmek için aşağıda bir yazıcıyı genişletin — bunu çözmek, hata raporu olmadan sorunu çözebilir. Yine de aşağıda bir rapor gönderebilirsiniz.`,logHealthSummary:`Günlüklerinizde bilinen sorunlar bulundu`,logHealthIntro:`Son günlükler bilinen sorunlarla eşleşiyor. Aşağıdaki düzeltmeleri kontrol edin — bunları çözmek, hata raporu olmadan sorununuzu çözebilir. Yine de aşağıda bir rapor gönderebilirsiniz.`,thankYou:`Teşekkürler!`,submitted:`Hata raporunuz gönderildi.`,viewIssue:`Sorunu Görüntüle`,closeKeepsRecording:`Sorunu yeniden oluştururken bu paneli kapatabilirsiniz; kayıt devam eder ve yeniden açtığınızda buraya dönersiniz.`,resumeRecording:`Hata raporu kaydediyor — {{elapsed}}. Tamamlamak için tıklayın.`,resumeReport:`Rapora devam et`,unexpectedError:`Beklenmedik bir hata oluştu`},failureDetection:{title:`AI Başarısızlık Algılama`,description:`Baskıları kendi barındırılan bir Obico ML API ile izle ve algılanan başarısızlıklara otomatik olarak yanıt ver.`,mlUrl:`Obico ML API URL'si`,mlUrlHint:`Kendi barındırılan Obico ml_api konteynerinizin temel URL'si (örn. http://192.168.1.10:3333).`,mlToken:`ML API Belirteci (isteğe bağlı)`,mlTokenPlaceholder:`Sunucu ML_API_TOKEN olmadan çalışıyorsa boş bırakın`,mlTokenHint:`Obico ml_api konteynerinizin ML_API_TOKEN ortam değişkeniyle eşleşmelidir. Konteyner belirteç olmadan çalışıyorsa boş bırakın.`,test:`Test`,testSuccess:`ML API erişilebilir ve sağlıklı.`,testSuccessTokenUnknown:`ML API erişilebilir ve sağlıklı. Belirteç doğrulanamadı.`,testFailed:`ML API'ye erişilemedi.`,sensitivity:`Hassasiyet`,sensitivityLow:`Düşük (daha az yanlış pozitif)`,sensitivityMedium:`Orta (dengeli)`,sensitivityHigh:`Yüksek (erken algıla, daha fazla yanlış pozitif)`,sensitivityHint:`Uyarıları ve başarısızlıkları tetikleyen güven eşiklerini ayarlar.`,action:`Algılanan başarısızlıkta eylem`,actionNotify:`Yalnızca bildir`,actionPause:`Baskıyı duraklat`,actionPauseOff:`Duraklat ve gücü kes`,pollInterval:`Sorgulama aralığı (saniye)`,pollIntervalHint:`Baskı yaparken her yazıcının ne sıklıkta kontrol edileceği. Minimum 5sn, maksimum 120sn.`,externalUrlMissing:`Harici URL ayarlanmamış.`,externalUrlHint:`ML API, kamera anlık görüntüsünü URL üzerinden alır. ML API konteyneri Bambuddy'ye erişebilsin diye Genel ayarlarda Harici URL'yi ayarlayın.`,perPrinterTitle:`İzlenen Yazıcılar`,perPrinterHint:`Algılama servisinin hangi yazıcıları izleyeceğini seçin.`,monitorAll:`Tüm bağlı yazıcıları izle`,statusTitle:`Durum`,serviceRunning:`Servis çalışıyor`,thresholds:`Düşük / Yüksek eşikler`,activePrinters:`Aktif baskılar`,noActivePrints:`Şu anda çalışan baskı yok.`,historyTitle:`Son Algılamalar`,noHistory:`Henüz algılama yok.`},makerworld:{title:`MakerWorld`,description:`Bambu Handy uygulamasına gitmeden — doğrudan Bambuddy'den içe aktarmak ve yazdırmak için bir MakerWorld model URL'si yapıştırın.`,pasteUrlHeader:`MakerWorld'den İçe Aktar`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… veya herhangi bir MakerWorld bağlantısını yapıştırın`,resolveButton:`Çöz`,signInRequiredTitle:`İndirme için Bambu Cloud girişi gerekli`,signInRequiredBody:`Model ayrıntılarına anonim olarak göz atabilirsiniz, ancak MakerWorld 3MF dosyalarını indirmek için bir Bambu Cloud hesabı gerektirir.`,signInExpiredTitle:`Bambu Cloud oturumu sona erdi`,signInExpiredBody:`Bambuddy oturumunuz açık kalmaya devam ediyor, ancak Bambu Lab kayıtlı belirteci artık kabul etmediği için indirmeler başarısız olacak. Bambu Cloud oturumunu yeniden açın.`,openCloudSettings:`Bulut ayarlarını aç`,untitledModel:`Adsız model`,byCreator:`{{name}} tarafından`,downloadsCount:`{{count}} indirme`,licensePrefix:`Lisans`,alreadyImported:`Zaten kütüphanede`,openOnMakerworld:`MakerWorld'de aç`,alreadyInLibrary:`Bu model zaten kütüphanenizde — Dosya Yöneticisi → MakerWorld'de bulun`,importSuccess:`{{filename}} içe aktarıldı — Dosya Yöneticisi → MakerWorld'e kaydedildi`,platesHeader:`Plakalar ({{count}})`,plateDefaultName:`Plaka {{n}}`,materialCount:`{{count}} filament`,amsRequired:`AMS gerekli`,slicedFor:`{{printer}} için dilimlendi`,alsoCompatible:`Ayrıca uyumlu olarak işaretlendi: {{printers}}`,importToLibrary:`Kaydet`,sliceIn:`Kaydet ve {{slicer}}'de Dilimle`,disclaimer:`MakerWorld entegrasyonu topluluk tarafından belgelenen API uç noktalarını kullanır. Bambuddy, MakerWorld veya Bambu Lab ile ilişkili veya onaylı değildir.`,lastImportSuccess:`Kütüphanenize içe aktarıldı`,lastImportAlreadyInLibrary:`Zaten kütüphanenizde`,viewInLibrary:`Dosya Yöneticisinde Görüntüle`,openInBambuStudio:`Bambu Studio'da Aç`,openInOrcaSlicer:`OrcaSlicer'da Aç`,importTo:`Dosya yöneticisine içe aktar`,recentImportsHeader:`Son içe aktarımlar`,phaseResolving:`Çözülüyor`,phaseDownloading:`İndiriliyor`,folderAuto:`MakerWorld (varsayılan)`,importAll:`Tümünü içe aktar`,importAllProgress:`{{current}}/{{total}} içe aktarılıyor`,openGallery:`Görüntü galerisini aç`,galleryPrev:`Önceki görüntü`,galleryNext:`Sonraki görüntü`,deleteImport:`Kütüphaneden kaldır`,importDeleting:`Kaldırılıyor…`,importDeleted:`Kütüphaneden kaldırıldı`,confirmDelete:`{{filename}} kütüphaneden kaldırılsın mı? Bu, yerel dosyayı siler ancak plaka MakerWorld'den yeniden içe aktarılabilir.`,errors:{resolveFailed:`O MakerWorld URL'si çözülemedi.`,downloadFailed:`İndirme başarısız. Lütfen tekrar deneyin.`,deleteFailed:`Dosya kütüphaneden kaldırılamadı.`}},gcodeViewer:{filamentSlot:`Filament {{n}}`,loading:`Takım yolu okunuyor…`,loadFailed:`Bu dosyanın G-code’u yüklenemedi.`,showTravel:`Boş hareketler`,topLayer:`Üst katman`,bottomLayer:`Alt katman`,noSource:`Önizlenecek dosya belirtilmedi.`,view:{filament:`Filament`,feature:`Öğe`,height:`Yükseklik`,width:`Genişlik`},feature:{wall:`Duvarlar`,sparseInfill:`Seyrek dolgu`,solidInfill:`Katı dolgu`,bridge:`Köprü / çıkıntı`,support:`Destek`,skirt:`Etek / kenarlık`,gapFill:`Boşluk dolgusu`,ironing:`Ütüleme`,primeTower:`Temizleme kulesi`},back:`Geri`,backToArchives:`Baskı Arşivlerine Dön`,backToFiles:`Dosya Yöneticisine Dön`,plates:`Plakalar`,plateN:`Plaka {{n}}`},libraryTrash:{title:`Çöp Kutusu`,headerButton:`Çöp`,headerTooltip:`Çöpe taşınan dosyaları görüntüle`,backToFiles:`Dosya Yöneticisine Dön`,subtitleAdmin:`Silinen dosyalar burada {{days}} gün kalır, ardından otomatik silinir. Bu görünüm tüm kullanıcılar için çöpteki dosyaları gösterir.`,subtitleUser:`Silinen dosyalar burada {{days}} gün kalır, ardından otomatik silinir.`,loading:`Çöp yükleniyor…`,loadError:`Çöp yüklenemedi.`,empty:`Çöp boş.`,summary:`{{count}} dosya · {{size}}`,emptyTrash:`Çöpü boşalt`,restore:`Geri Yükle`,purgeNow:`Şimdi sil`,autoPurgeIn:`{{when}} içinde otomatik silinir`,days:`gün`,retentionLabel:`Otomatik sil`,selectAll:`Tümünü seç`,selectOne:`{{filename}} seç`,selectionCount:`{{count}} seçildi`,bulkRestore:`Seçilenleri geri yükle`,bulkPurge:`Seçilenleri sil`,col:{filename:`Dosya`,folder:`Klasör`,size:`Boyut`,deleted:`Çöpe taşındı`,autoPurge:`Otomatik silinir`,owner:`Sahip`,actions:`İşlemler`},confirm:{purgeTitle:`Kalıcı olarak silinsin mi?`,purgeBody:`{{filename}} diskten silinecek ve geri yüklenemeyecek.`,emptyTitle:`Çöp boşaltılsın mı?`,emptyBody:`Tüm {{count}} dosya diskten silinecek. Bu geri alınamaz.`,bulkPurgeTitle:`Seçili dosyalar kalıcı olarak silinsin mi?`,bulkPurgeBody:`Seçili {{count}} dosya diskten silinecek ve geri yüklenemeyecek.`,cta:`Kalıcı olarak sil`},toast:{restored:`Dosya geri yüklendi.`,restoreFailed:`Dosya geri yüklenemedi.`,purged:`Dosya kalıcı olarak silindi.`,purgeFailed:`Dosya silinemedi.`,emptied:`{{count}} dosya çöpten silindi.`,emptyFailed:`Çöp boşaltılamadı.`,retentionSaved:`Otomatik silme {{days}} gün olarak ayarlandı.`,retentionFailed:`Saklama ayarı kaydedilemedi.`,bulkRestored:`{{count}} dosya geri yüklendi.`,bulkPurged:`{{count}} dosya silindi.`}},libraryPurge:{title:`Eski dosyaları temizle`,headerButton:`Eskileri temizle`,headerTooltip:`Eski dosyaları toplu olarak çöpe taşı`,description:`Kütüphanenizden eski dosyaları tek seferde temizleyin. Baskı geçmişi olan dosyalar son baskı tarihlerine göre, hiç yazdırılmamış dosyalar yükleme tarihlerine göre yaşlandırılır.`,ageLabel:`Şundan eski dosyaları taşı`,days:`gün`,includeNeverPrinted:`Hiç yazdırılmamış dosyaları dahil et`,effectsTitle:`Temizle'ye tıkladığınızda ne olur`,effect1:`Eşleşen dosyalar Çöp'e taşınır — henüz diskten silinmezler.`,effect2:`Saklama penceresi sona erene kadar Çöp'ten herhangi bir zamanda geri yükleyebilirsiniz.`,effect3:`Saklama sonrası, çöp süpürücü onları kalıcı olarak diskten kaldırır.`,effect4:`Harici (bağlı) klasörlerdeki dosyalar atlanır — Bambuddy asla sahibi olmadığı bayt'ları silmez.`,previewLoading:`Kaç dosyanın eşleştiği kontrol ediliyor…`,previewFailed:`Temizleme önizlenemedi.`,previewSummary:`{{count}} dosya · {{size}} çöpe taşınacak`,andMore:`…ve {{count}} daha`,warning:`Çöpe taşınan dosyalar saklama penceresi sona erene kadar depolama alanını kullanmaya devam eder. Diski hemen boşaltmak için sonradan Çöp'ü boşaltın.`,confirmCta:`{{count}} dosyayı çöpe taşı`,purging:`Çöpe taşınıyor…`,toast:{success:`{{count}} dosya çöpe taşındı.`,failed:`Dosyalar temizlenemedi.`}},libraryAutoPurge:{enableLabel:`Eski dosyaları otomatik temizle`,enableDescription:`Yönetici temizliğini günde bir kez çalıştırır. Dosyalar önce Çöp'e gider — hemen silinmezler.`,ageLabel:`Şundan eski dosyaları otomatik temizle`,ageDescription:`Minimum 7 gün, maksimum 10 yıl. Manuel Temizle düğmesiyle aynı yaş kuralını kullanır.`,days:`gün`,includeNeverPrinted:`Hiç yazdırılmamış dosyaları dahil et`,saveFailed:`Otomatik temizleme ayarları kaydedilemedi.`},archivePurge:{headerButton:`Eskileri temizle`,headerTooltip:`Eski arşivleri toplu olarak sil`,title:`Eski arşivleri temizle`,description:`Eski baskı geçmişini temizleyin. Her arşiv en son baskı tamamlamasına göre yaşlandırılır — bir arşivi yeniden yazdırmak yaşını yeniler, bu nedenle aktif çalışma asla temizlenmez.`,ageLabel:`Son şu kadar günde yazdırılmamış arşivleri sil`,days:`gün`,effectsTitle:`Temizle'ye tıkladığınızda ne olur`,effect1:`Eşleşen her arşiv listelerden gizlenir ve dosyaları diskten kaldırılır (3MF, küçük resim, zaman atlamalı video, kaynak 3MF, F3D tasarım dosyası, fotoğraflar).`,effect2:`Arşiv satırı veritabanında kalır, böylece Hızlı İstatistikler filament, süre, maliyet ve enerji katkısını korur — tek arşiv silme varsayılanı ile aynı.`,effect3:`Hızlı İstatistik katkısını da kaldırmak için aşağıdaki "Ayrıca istatistiklerden kaldır"ı işaretleyin (tek arşiv silme seçeneğiyle eşleşir). O yol geri alınamaz.`,effect4:`Bir arşivi yeniden yazdırmak yaş saatini yeniler, bu nedenle hâlâ kullandığınız arşivler güvendedir.`,purgeStatsLabel:`Ayrıca istatistiklerden kaldır`,purgeStatsHint:`Eşleşen arşivleri Hızlı İstatistiklerden (filament, süre, maliyet, enerji) düşürür. Bu olmadan, Hızlı İstatistikler her katkıyı korur ve yalnızca dosyalar diskten ayrılır.`,previewLoading:`Kaç arşivin eşleştiği kontrol ediliyor…`,previewFailed:`Temizleme önizlenemedi.`,previewSummary:`{{count}} arşiv · {{size}} kaldırılacak`,andMore:`…ve {{count}} daha`,warning:`Dosyalar diskten kaldırılır ve geri yüklenemez. Devam etmeden önce saklamak istediğiniz her şeyi indirin veya favoriye ekleyin.`,confirmCta:`{{count}} arşivi kaldır`,purging:`Kaldırılıyor…`,toast:{success:`{{count}} arşiv kaldırıldı.`,failed:`Arşivler temizlenemedi.`}},archiveAutoPurge:{enableLabel:`Eski arşivleri otomatik temizle`,enableDescription:`Günde bir kez, eşik içinde yazdırılmamışsa arşivleri listelerden gizler ve dosyalarını diskten kaldırır. Bir arşivi yeniden yazdırmak saati sıfırlar.`,ageLabel:`Son şu kadar günde yazdırılmamış arşivleri otomatik sil`,ageDescription:`Minimum 7 gün, maksimum 10 yıl. En son baskı tamamlamasına göre — bir arşivi yeniden yazdırmak yaşını yeniler. 3MF, küçük resim, zaman atlamalı video, kaynak 3MF, F3D ve fotoğrafları kaldırır.`,days:`gün`,purgeStatsLabel:`Ayrıca istatistiklerden kaldır`,purgeStatsDescription:`Etkinleştirildiğinde, günlük süpürücü her temizlenen arşivi de Hızlı İstatistiklerden (filament, süre, maliyet, enerji) düşürür. Varsayılan kapalı — Hızlı İstatistikler katkıyı korur, yalnızca dosyalar diskten ayrılır.`,runNow:`Arşivleri şimdi temizle`,saveFailed:`Otomatik temizleme ayarları kaydedilemedi.`},cameraTokens:{scope:{camera_stream:`Kamera akışı`,camwall:`Kamera duvarı`,overlay:`Yayın bindirmesi`},title:`Kamera API Belirteçleri`,navTitle:`Kamera API belirteçleri`,description:`Kamera akışını Home Assistant, Frigate, kiosk ekranları veya sabit bir adres gerektiren başka araçlara gömmek için uzun ömürlü belirteçler. Kapsam oluşturma sırasında seçilir; belirteç istediğiniz zaman iptal edilebilir.`,loading:`Yükleniyor…`,confirmRevoke:{title:`Bu belirteç iptal edilsin mi?`,body:`"{{name}}" kullanan herhangi bir cihaz hemen erişimini kaybedecek. Bu geri alınamaz.`,cancel:`İptal`,confirm:`İptal Et`},create:{scopeLabel:`Kapsam`,hintCameraStream:`Kamera akışı belirteci yalnızca kamera akışlarını ve anlık görüntüleri alabilir. Home Assistant, Frigate veya tek bir kamerayı gömen her şey için kullanın.`,hintCamWall:`Kamera duvarı belirteci, oturum açmadan bir ekranda /camwall adresini açar. Her yazıcının adını ve durumunu, ayrıca kamera akışlarını görebilir. Dosya adlarını, adresleri veya erişim kodlarını göremez.`,hintOverlay:`Yayın bindirmesi belirteci, oturum açmadan bir ekranda /overlay/{printerId} adresini açar — OBS veya herhangi bir canlı yayın için. Bir yazıcının kamera akışını ve ekranda gösterilen dosya adı dahil canlı yazdırma durumunu görebilir. Adresleri veya erişim kodlarını göremez.`,title:`Yeni belirteç oluştur`,nameLabel:`Belirteç adı`,namePlaceholder:`örn. Home Assistant`,daysLabel:`Sona erene kadar gün`,submit:`Oluştur`,hint:`Maksimum ömür 365 gün. Belirteç değeri oluşturmada yalnızca bir kez gösterilir — şimdi kopyalayın.`},created:{camWallUrlTitle:`Bu ekran için kamera duvarı adresi`,camWallUrlHint:`Bu adresi ekranda açın. Adresi okuyabilen herkes duvarı izleyebilir, bu yüzden onu bir anahtar gibi görün; ekranın erişimini kesmek için belirteci iptal edin.`,overlayUrlTitle:`OBS için bindirme adresi`,overlayUrlHint:`Bunu OBS'ye Tarayıcı Kaynağı olarak ekleyin. /overlay/1 içindeki sayıyı yazıcınızın numarasıyla değiştirin (Yazıcılar sayfasındaki adresinden). Adresi okuyabilen herkes yayını izleyebilir, bu yüzden onu bir anahtar gibi görün — erişimi kesmek için belirteci iptal edin.`,title:`Belirteç oluşturuldu — şimdi kopyalayın`,warning:`Bu, bu belirtecin görünür olacağı tek seferdir. Bu iletişim kutusunu kapattıktan sonra onu bir daha asla görüntüleyemezsiniz.`,copy:`Kopyala`,dismiss:`Kaydettim`},list:{scope:`Kapsam`,myTitle:`Belirteçlerim`,allTitle:`Tüm kullanıcılar (yönetici görünümü)`,empty:`Henüz belirteç yok.`,name:`Ad`,owner:`Sahip`,prefix:`Önek`,created:`Oluşturuldu`,expires:`Sona Erer`,lastUsed:`Son kullanım`,revoke:`İptal Et`,expired:`Süresi Doldu`},toast:{created:`Belirteç oluşturuldu`,createFailed:`Belirteç oluşturulamadı`,revoked:`Belirteç iptal edildi`,revokeFailed:`Belirteç iptal edilemedi`,loadFailed:`Belirteçler yüklenemedi`,copied:`Panoya kopyalandı`,copyFailed:`Kopyalama başarısız — manuel olarak seçip kopyalayın`}},forecast:{title:`Tahmin`,noSpools:`Aktif makara bulunamadı. Tahmin verisini görmek için envanterinize makara ekleyin.`,noUsageData:`Kullanım verisi mevcut değil — stok zaman çizelgesi öngörülemiyor.`,sku:`SKU`,material:`Malzeme`,stock:`Stok`,dailyRate:`Oran`,daysLeft:`Kalan Gün`,emptyBy:`Şu Tarihte Boş`,reorderBy:`Şu Tarihte Sipariş`,actions:`İşlemler`,trend:`Trend`,estimated:`Tahmini`,noData:`Veri yok`,timeframe:`Zaman Aralığı`,chartTitle:`Öngörülen Stok — İlk 5 Malzeme`,dashedLinesROP:`Kesik çizgiler = yeniden sipariş noktaları`,stockLevel:`Stok Seviyesi`,reorderPoint:`Yeniden Sipariş Noktası`,safetyMargin:`Güvenlik Marjı`,trendLegend:`Trend (geçmiş tabanlı, %95 servis seviyesi)`,estimatedLegend:`Tahmini (ağırlık farkı)`,noDataLegend:`Veri yok`,ropLabel:`ROP`,ssLabel:`SS`,safetyStockLegend:`Güvenlik stoku`,stockArrivalLegend:`Stok varışı`,stockoutLegend:`Stok tükenmesi`,alertCount_one:`{{count}} uyarı`,alertCount_other:`{{count}} uyarı`,order:`Sipariş`,save:`Kaydet`,cancel:`İptal`,settingsSaved:`Ayarlar kaydedildi`,failedSaveSettings:`Ayarlar kaydedilemedi`,globalLeadTimeSaved:`Global teslim süresi kaydedildi`,globalLeadTime:`Global teslim süresi`,globalLeadTimeHint:`Global teslim süresi tabanı — tüm SKU'lar için yeniden sipariş noktası hesaplamasında kullanılır`,skuLeadTimeOverride:`SKU Teslim Süresi Geçersiz Kılma`,skuLeadTimeHint:`0 = global teslim süresini kullan. Bu SKU için geçersiz kılmak için >0 ayarlayın.`,safetyMarginLabel:`Güvenlik Marjı`,effectiveLeadTime:`Etkili Teslim Süresi`,effectiveLeadTimeHint:`max(global {{global}}g, SKU {{sku}}g)`,reorderPointHint:`d̄ × LT + güvenlik marjı — stok bu seviyeye geldiğinde sipariş ver`,safetyMarginHint:`İstatistiksel güvenlik stoku (z=1.65 × σ × √LT) + kullanıcı tanımlı tampon`,safetyMarginHintDays:`İstatistiksel güvenlik stokunun üzerine eklenen tampon.{{approx}}`,safetyMarginHintDaysApprox:` ≈ mevcut oranda {{g}}g.`,safetyMarginHintG:`İstatistiksel güvenlik stokunun üzerine eklenen sabit ağırlık tamponu.{{approx}}`,safetyMarginHintGApprox:` ≈ mevcut oranda {{days}}g.`,individualSpools:`Bireysel makaralar`,labelWeight:`Etiket`,spoolCount_one:`{{count}} makara`,spoolCount_other:`{{count}} makara`,stockBreakRisk:`Stok tükenme riski`,stockBreakDetail:`{{days}}g kaldı, teslim süresi {{lt}}g.`,stockBreakBefore:`Yenileme öncesi stok tükenmesi`,reorderNow:`Şimdi sipariş ver`,reorderTriggerPassed:`Tetikleyici tarih {{date}} geçti.`,shoppingList:`Alışveriş Listesi`,shoppingListItems_one:`({{count}} öğe)`,shoppingListItems_other:`({{count}} öğe)`,shoppingListEmpty:`Alışveriş listesi boş. Öğe eklemek için herhangi bir satırdaki sepet simgesine tıklayın.`,addToCart:`Alışveriş listesine ekle`,alertsSnoozed:`Bu SKU için uyarıları sustur`,alertsEnabled:`Bu SKU için uyarıları aç`,addedToCart:`Alışveriş listesine eklendi`,failedAddItem:`Öğe eklenemedi`,listView:`Liste`,logisticsView:`Lojistik`,qty:`Adet`,weight:`Ağırlık`,leadTime:`Teslim Süresi`,expectedRestock:`Beklenen Yenileme`,status:`Durum`,note:`Not`,pending:`Beklemede`,purchased:`Satın Alındı`,received:`Teslim Alındı`,markPurchased:`Satın alındı olarak işaretle`,markReceived:`Teslim alındı olarak işaretle — makaraları Stok envanterine ekler`,resetToPending:`Beklemeye sıfırla`,remove:`Kaldır`,clearAll:`Tümünü temizle`,downloadCsv:`CSV`,addToCartTitle:`Alışveriş Listesine Ekle`,byQuantity:`Miktara Göre`,byDuration:`Süreye Göre`,numberOfSpools:`Makara sayısı`,lastHowManyDays:`Kaç gün dayanmalı?`,noUsageQty:`Kullanım verisi yok — miktar 1 olarak ayarlandı.`,noteOptional:`Not (isteğe bağlı)`,notePlaceholder:`örn. X projesi için, acil…`,addNSpools_one:`{{count}} makara ekle`,addNSpools_other:`{{count}} makara ekle`,onArrival:`Varışta`,stockBreakIn:`{{days}}g içinde stok tükenmesi.`,stockRunsOutBefore:`{{lt}}g teslim süresi dolmadan önce stok tükenir.`,atRate:`{{rate}}g/gün oranında size gerekli`,moreSpools_one:`{{count}} daha makara`,moreSpools_other:`{{count}} daha makara`,bridgeGap:`boşluğu kapatmak için.`,noReadAccess:`Envanter tahminlerini görüntüleme izniniz yok.`,noWriteAccess:`Tahmin ayarlarını değiştirme izniniz yok.`}}},ru:{translation:{nav:{printers:`Принтеры`,archives:`Архив`,queue:`Очередь печати`,stats:`Статистика`,profiles:`Профили`,maintenance:`Обслуживание`,projects:`Проекты`,inventory:`Филамент`,finance:`Финансы`,files:`Файловый менеджер`,makerworld:`MakerWorld`,notifications:`Уведомления`,settings:`Настройки`,system:`Система`,collapseSidebar:`Свернуть боковую панель`,expandSidebar:`Развернуть боковую панель`,update:`Обновить`,updateAvailable:`Доступно обновление: v{{version}}`,updateAvailableBanner:`Доступна версия {{version}}!`,viewUpdate:`Посмотреть обновление`,viewOnGithub:`Открыть на GitHub`,keyboardShortcuts:`Горячие клавиши (?)`,switchToLight:`Включить светлую тему`,switchToDark:`Включить тёмную тему`,switchToSystem:`Использовать системную тему`,smartSwitches:`Умные выключатели`,logout:`Выйти`,installApp:`Установить приложение`,installAppSuccess:`Bambuddy установлен`},common:{plusNMore:`ещё {{count}}`,save:`Сохранить`,saving:`Сохранение...`,cancel:`Отмена`,delete:`Удалить`,edit:`Изменить`,add:`Добавить`,close:`Закрыть`,confirm:`Подтвердить`,loading:`Загрузка...`,error:`Ошибка`,errorLoading:`Не удалось загрузить данные`,retry:`Повторить`,success:`Готово`,warning:`Предупреждение`,enabled:`Включено`,disabled:`Отключено`,yes:`Да`,no:`Нет`,on:`Вкл.`,off:`Выкл.`,all:`Все`,none:`Нет`,search:`Поиск`,filter:`Фильтр`,sort:`Сортировка`,refresh:`Обновить`,download:`Скачать`,upload:`Загрузить`,uploading:`Загрузка...`,uploadFailed:`Ошибка загрузки`,actions:`Действия`,status:`Состояние`,name:`Название`,description:`Описание`,date:`Дата`,time:`Время`,hours:`часов`,minutes:`минут`,seconds:`секунд`,days:`дней`,enable:`Включить`,disable:`Отключить`,permissions:`Разрешения`,noPrinters:`Принтеры не настроены`,noData:`Нет данных`,linkNotFound:`Ссылка не найдена`,required:`Обязательно`,optional:`Необязательно`,dismiss:`Закрыть`,apply:`Применить`,reset:`Сбросить`,export:`Экспорт`,import:`Импорт`,clear:`Очистить`,selectAll:`Выбрать все`,deselectAll:`Снять выделение`,noChange:`— Без изменений —`,unchanged:`Без изменений`,unassigned:`Не назначено`,unknown:`Неизвестно`,unknownError:`Неизвестная ошибка`,today:`Сегодня`,tomorrow:`Завтра`,asap:`Как можно скорее`,overdue:`Просрочено`,now:`Сейчас`,collapse:`Свернуть`,expand:`Развернуть`,previous:`Назад`,next:`Далее`,viewArchive:`Открыть архив`,viewInFileManager:`Открыть в файловом менеджере`,addedBy:`Добавил: {{username}}`,prints:`печатей`,more:`ещё +{{count}}`,ascending:`По возрастанию`,descending:`По убыванию`,back:`Назад`,copy:`Копировать`,copied:`Скопировано!`,printer:`Принтер`,remove:`Удалить`,type:`Тип`,print:`Печать`,rename:`Переименовать`,move:`Переместить`,create:`Создать`,duplicate:`Дублировать`,left:`Левый`,right:`Правый`,user:`Пользователь`,run:`Запустить`,running:`Выполняется...`},finance:{allTypes:`Все типы`,allCostCenters:`Все центры затрат`,title:`Финансы`,subtitle:`Кошелёк, личные операции и центры затрат`,noAccess:`У вас нет разрешения на просмотр финансовых данных.`,personalView:`Личный режим`,adminView:`Режим администратора`,createCostCenter:`Создать центр затрат`,adjustWallet:`Изменить кошелёк`,addManualPrint:`Добавить печать вручную`,manageMembers:`Управление участниками центра затрат`,currentBalance:`Личный баланс`,transactions:`Операции`,personalTransactions:`Личные операции`,costCenters:`Центры затрат`,availableForPrinting:`Доступен для назначения печати`,costCenterName:`Название`,budgetType:`Тип бюджета`,monthlyBudget:`Месячный бюджет`,totalBudget:`Общий бюджет`,noBudget:`Без бюджета`,create:`Создать`,selectUser:`Выберите пользователя`,transactionType:`Тип`,amount:`Сумма`,noCostCenter:`Без центра затрат`,descriptionOptional:`Описание (необязательно)`,applyAdjustment:`Применить изменение`,memberCanPrint:`Участник может печатать`,addMember:`Добавить участника`,canPrint:`Может печатать`,noMembers:`Участники не назначены.`,editCostCenter:`Изменить центр затрат`,myCostCenters:`Мои центры затрат`,costCentersHint:`Проверяйте бюджетные лимиты и контролируйте расходы`,noCostCenters:`Центры затрат не найдены.`,owner:`Владелец`,balance:`Баланс счёта`,unlimited:`Без ограничений`,budgetPolicyHint:`Баланс счёта используется для учёта затрат. Печать ограничивается только бюджетом выбранного центра затрат; без бюджета ограничений нет.`,budget:`Бюджет`,shared:`Общий`,cannotEditPrivateCostCenter:`Личные центры затрат нельзя редактировать здесь`,recentTransactions:`Недавние операции`,transactionsHint:`Фильтр по типу и центру затрат`,first:`Первая`,prev:`Предыдущая`,next:`Следующая`,last:`Последняя`,pageNumberOf:`Страница {{page}} из {{total}}`,noTransactions:`Нет доступных операций.`,noTransactionsForFilter:`Нет операций, соответствующих выбранным фильтрам.`,costCenter:`Центр затрат`,balanceAfter:`Баланс после операции`,userWithId:`Пользователь №{{id}}`,partial:`Частично`,editTransaction:`Изменить операцию`,selectCostCenter:`Выберите центр затрат...`,costCenterRequired:`Выберите центр затрат`,amountExample:`например, 4,00`,manualAdjustmentExample:`например, ручная корректировка`,userRequired:`Выберите пользователя`,amountInvalid:`Сумма должна быть допустимым числом`,createdCostCenter:`Центр затрат создан`,createCostCenterFailed:`Не удалось создать центр затрат`,transactionDeleted:`Операция удалена`,deleteTransactionFailed:`Не удалось удалить операцию`,transactionEdited:`Операция обновлена, бухгалтерская книга пересчитана`,editTransactionFailed:`Не удалось изменить операцию`,manualPrintCreated:`Расход на печать добавлен, бухгалтерская книга пересчитана`,manualPrintFailed:`Не удалось добавить печать вручную`,memberSaved:`Участник сохранён`,memberSaveFailed:`Не удалось сохранить участника`,memberRemoved:`Участник удалён`,memberRemoveFailed:`Не удалось удалить участника`,costCenterNameRequired:`Необходимо указать название центра затрат`,costCenterUpdated:`Центр затрат обновлён`,costCenterUpdateFailed:`Не удалось обновить центр затрат`,confirmDeleteCostCenter:`Удалить центр затрат «{{name}}»?`,costCenterDeleted:`Центр затрат удалён`,costCenterDeleteFailed:`Не удалось удалить центр затрат`,deleteTransactionConfirm:`Удалить эту операцию? Балансы будут пересчитаны автоматически.`,deposit:`Пополнение`,withdraw:`Списание`,printCharge:`Расход на печать`,deleteTransaction:`Удалить операцию`},printers:{title:`Принтеры`,addPrinter:`Добавить принтер`,addPreflight:{checking:`Проверка подключения...`,warning:`Некоторые проверки подключения не пройдены. Принтер может отображаться как отключённый. Проверьте результаты ниже, исправьте возможные проблемы или сохраните настройки как есть.`,back:`Назад`,saveAnyway:`Всё равно сохранить`},editPrinter:`Изменить принтер`,deletePrinter:`Удалить принтер`,printerName:`Название принтера`,serialNumber:`Серийный номер`,ipAddress:`IP-адрес / имя хоста`,accessCode:`Код доступа`,model:`Модель`,nozzleCount:`Количество сопел`,autoArchive:`Автоматически архивировать`,status:{available:`Доступен`,idle:`Ожидает`,printing:`Печать`,paused:`Приостановлен`,offline:`Не в сети`,problem:`Проблема`,error:`Ошибка`,finished:`Завершено`,unknown:`Неизвестно`},temperatures:{nozzle:`Сопло`,bed:`Стол`,chamber:`Камера`},heaterHistory:{title:`История нагрева`,openLabel:`Открыть историю нагрева`,nozzle:`Сопло`,nozzle2:`Сопло 2`,bed:`Стол`,chamber:`Камера`,error:`Не удалось загрузить историю`,empty:`Данные пока не записывались`},progress:`Выполнено {{percent}}%`,timeRemaining:`Осталось {{time}}`,deleteConfirm:`Удалить принтер «{{name}}»?`,maintenanceOk:`Обслуживание в норме`,maintenanceWarning:`{{count}} предупреждение`,maintenanceWarning_plural:`{{count}} предупреждений`,maintenanceDue:`Требуется: {{count}}`,maintenanceDue_plural:`Требуется: {{count}}`,sort:{name:`Название`,status:`Состояние`,model:`Модель`,location:`Расположение`,eta:`Время завершения`,ascending:`По возрастанию`,descending:`По убыванию`},cardSize:{small:`Маленькие карточки`,medium:`Средние карточки`,large:`Большие карточки`,extraLarge:`Очень большие карточки`},pageView:{openCamWallPage:`Открыть стену камер как отдельную страницу`,cards:`Карточки`,camWall:`Стена камер`},camWall:{page:{tokenRejected:`Эта ссылка на стену камер больше недействительна. Возможно, срок действия токена истёк или он был отозван.`,loadFailed:`Не удалось загрузить принтеры.`},noPrinters:`Нет принтеров для отображения`,noSignal:`Нет сигнала`,live:`Онлайн`,snap:`Снимок`,off:`Выкл.`,summary:`Онлайн: {{live}}, снимки: {{snap}}, всего: {{total}}`,layer:`Слой {{cur}}/{{total}}`,timeLeft:`Осталось {{time}}`,statusMode:{off:`Выкл.`,compact:`Компактный`,full:`Полный`},settings:{title:`Настройки стены камер`,maxLive:`Максимум онлайн-трансляций`,maxLiveHint:`Сколько камер одновременно показывать в реальном времени. Остальные будут обновляться снимками.`,snapshotInterval:`Интервал снимков, с`,snapshotIntervalHint:`Как часто обновлять снимки камер без онлайн-трансляции.`,statusOverlay:`Наложение состояния`,statusOverlayHint:`Компактный режим: только состояние. Полный: прогресс, слой и оставшееся время.`}},hideOffline:`Скрыть принтеры не в сети`,nextAvailable:`Ближайший доступный`,powerOn:`Включить питание`,offlinePrintersWithPlugs:`Принтеры не в сети с умными розетками`,noPrintersConfigured:`Принтеры пока не настроены`,search:`Поиск принтеров...`,noSearchResults:`Нет принтеров, соответствующих поиску или фильтрам`,filter:{allStatuses:`Все состояния`,allLocations:`Все расположения`},toolbar:{filters:`Фильтры`,view:`Вид`,actions:`Действия`},readyToPrint:`Готов к печати`,external:`Внешняя подача`,extL:`Внешняя, левое`,extR:`Внешняя, правое`,deleteArchives:`Удалить архивы печати`,noLabel:`Без метки`,printPreview:`Предпросмотр печати`,width:`Ширина`,height:`Высота`,noObjectsFound:`Объекты не найдены`,objectsLoadedOnPrintStart:`Объекты загрузятся после начала печати`,willBeSkipped:`Будет пропущен`,name:`Название`,serialCannotBeChanged:`Серийный номер нельзя изменить`,locationHelp:`Используется для группировки принтеров и фильтрации заданий в очереди`,wifiSignal:{veryWeak:`Очень слабый`,weak:`Слабый`,fair:`Средний`,good:`Хороший`,excellent:`Отличный`},maintenanceUpToDate:`Обслуживание выполнено — нажмите для просмотра`,maintenance:{title:`На обслуживании`,subtitle:`Принтер приостановлен: подключение отключено, задания из очереди не назначаются, уведомления не отправляются.`,pillLabel:`Обслуживание`,exitButton:`Завершить обслуживание`,menuEnter:`Перевести в режим обслуживания`,menuExit:`Выйти из режима обслуживания`,toastEntered:`Принтер {{name}} переведён в режим обслуживания`,toastExited:`Принтер {{name}} снова в работе`,confirmMidPrintTitle:`Перевести в режим обслуживания во время печати?`,confirmMidPrintMessage:`Принтер {{name}} сейчас печатает. Режим обслуживания отключит MQTT, отслеживание прогресса и уведомление о завершении этого задания. Продолжить?`,editFieldLabel:`Режим обслуживания`,editFieldHelp:`Отключает для принтера MQTT, назначение заданий из очереди и уведомления. Используйте при ремонте, параллельных установках Bambuddy или временной приостановке.`},chamberLightOn:`Включить подсветку камеры`,chamberLightOff:`Выключить подсветку камеры`,files:`Файлы`,browseFiles:`Открыть файлы принтера`,autoOffAfterPrint:`Автовыключение после печати`,autoOffExecuted:`Автовыключение выполнено — включите принтер для сброса состояния`,hmsErrors:`Ошибки HMS`,viewHmsErrors:`Показать ошибки HMS: {{count}}`,resume:`Продолжить`,pause:`Пауза`,stop:`Стоп`,camera:`Камера`,skipObject:`Пропустить объект`,reconnect:`Переподключить`,forceRefresh:`Принудительно обновить`,forceRefreshSuccess:`Запрошено обновление данных`,mqttDebug:`Отладка MQTT`,printerInformation:`Информация о принтере`,copyToClipboard:`Копировать`,copied:`Скопировано!`,state:`Состояние`,wifiSignalLabel:`Сигнал Wi‑Fi`,developerMode:`Режим разработчика`,enabled:`Включён`,disabled:`Отключён`,addedOn:`Добавлен`,sdCard:`SD-карта`,inserted:`Установлена`,notInserted:`Не установлена`,totalPrintHours:`Часов печати`,activeNozzle:`Активное сопло: {{nozzle}}`,amsSwitchInletTooltip:`Переключатель тракта филамента IN-{{inlet}} ({{side}}) — подаёт на оба сопла`,nozzleRack:`Держатель сопел`,nozzleDocked:`В держателе`,nozzleMounted:`Установлено`,nozzleActive:`Активно`,nozzleIdle:`Ожидание`,nozzleDiameter:`Диаметр`,nozzleType:`Тип`,nozzleStatus:`Состояние`,nozzleFilament:`Филамент`,nozzleWear:`Износ`,nozzleMaxTemp:`Макс. температура`,nozzleSerial:`Серийный номер`,nozzleHardenedSteel:`Закалённая сталь`,nozzleStainlessSteel:`Нержавеющая сталь`,nozzleTungstenCarbide:`Карбид вольфрама`,nozzleFlow:`Производительность`,nozzleHighFlow:`Высокопоточное`,nozzleStandardFlow:`Стандартное`,firmwareUpdate:`Обновление прошивки`,firmwareInstructions:`На сенсорном экране принтера откройте`,firmwareNav:`Перейдите в раздел`,settings:`Настройки`,firmware:`Прошивка`,discoverPrinters:`Найти принтеры`,searching:`Поиск...`,manualEntry:`Добавить вручную`,addFromCloud:`Добавить из облака`,toast:{printerDeleted:`Принтер удалён`,missingSpoolAssignment:`На принтере {{printer}} началась печать. Не назначены катушки для слотов: {{slots}}`,killSwitchTriggered:`Аварийный выключатель биллинга остановил несанкционированную печать на {{printer}}: {{filename}}`,billingChargeFailed:`Не удалось начислить стоимость {{filename}} на {{printer}}. Резерв бюджета сохранён; проверьте журналы сервера.`,assignmentVerified:`Филамент загружен в слот {{slot}} ({{printer}})`,assignmentVerifiedNoKprofile:`Слот {{slot}} на {{printer}} загружен, но профиль калибровки потока (K-профиль) не применён`,assignmentNotConfirmed:`Не удалось подтвердить назначение слота {{slot}} на {{printer}} — проверьте слот AMS`,printerAdded:`Принтер добавлен`,printerUpdated:`Настройки принтера обновлены`,failedToDelete:`Не удалось удалить принтер`,failedToAdd:`Не удалось добавить принтер`,connectionFailedNotAdded:`Не удалось подключиться к принтеру. Проверьте IP-адрес, серийный номер и код доступа, а также убедитесь, что включён режим «Только локальная сеть». Принтер не добавлен.`,failedToUpdate:`Не удалось обновить настройки принтера`,commandSent:`Команда отправлена`,failedToSendCommand:`Не удалось отправить команду`,turnedOn:`Питание {{name}} включено`,failedToPowerOn:`Не удалось включить {{name}}`,scriptTriggered:`Сценарий запущен`,printStopped:`Печать остановлена`,printPaused:`Печать приостановлена`,printResumed:`Печать продолжена`,referenceDeleted:`Эталон удалён`,detectionAreaSaved:`Область обнаружения сохранена`,failedToRunScript:`Не удалось запустить сценарий`,failedToStopPrint:`Не удалось остановить печать`,failedToPausePrint:`Не удалось приостановить печать`,failedToResumePrint:`Не удалось продолжить печать`,failedToControlChamberLight:`Не удалось изменить состояние подсветки камеры`,failedToSetSpeed:`Не удалось изменить скорость печати`,failedToUpdateSetting:`Не удалось изменить настройку`,failedToSkipObjects:`Не удалось пропустить объекты`,failedToRereadRfid:`Не удалось повторно считать RFID`,failedToCheckPlate:`Не удалось проверить пластину`,failedToUpdateLabel:`Не удалось обновить метку`,failedToDeleteReference:`Не удалось удалить эталон`,failedToSaveDetectionArea:`Не удалось сохранить область обнаружения`,plateCheckEnabled:`Проверка пластины включена`,plateCheckDisabled:`Проверка пластины отключена`,calibrationSaved:`Калибровка сохранена`,calibrationFailed:`Не удалось выполнить калибровку`,rfidRereadInitiated:`Запущено повторное считывание RFID`,loadInitiated:`Загрузка филамента…`,unloadInitiated:`Выгрузка филамента…`,failedToLoad:`Не удалось загрузить филамент`,failedToUnload:`Не удалось выгрузить филамент`},connection:{connected:`Подключён`,offline:`Не в сети`},plateStatus:{markCleared:`Отметить пластину как очищенную`,cleared:`Пластина очищена`,notCleared:`Пластина не очищена`,inUse:`Пластина используется`},queue:{inQueue:`В очереди: {{count}} задание`,inQueue_plural:`В очереди: {{count}} заданий`},controls:`Управление`,rfid:{reread:`Повторно считать RFID`},ams:{load:`Загрузить`,unload:`Выгрузить`,feedTitle:`В какое сопло загрузить {{slot}}?`,feedPrompt:`Filament Track Switch может направить этот слот в любой из хотэндов. Выберите, в какой подавать.`,feedLeft:`Левое сопло`,feedRight:`Правое сопло`,feedAlreadyLoaded:`Уже загружено`,switchNotReady:`Filament Track Switch ещё не настроен. Назначьте каждой AMS вход на принтере и повторите попытку.`},bedJog:{limitWarning:`При ручном перемещении ограничения хода не контролируются: из-за ошибки прошивки Bambu программные концевики игнорируются для удалённых команд. Перемещайте осторожно, чтобы избежать столкновения.`,title:`Ручное перемещение`,bed:`Стол`,step:`Шаг (мм)`,up:`Поднять стол`,down:`Опустить стол`,toolheadUp:`Поднять печатающую голову`,toolheadDown:`Опустить печатающую голову`,disabledWhilePrinting:`Недоступно во время печати`,notHomedTitle:`Принтер не выполнил парковку по осям`,notHomedMessage:`После последней печати принтер не выполнял Home. Сначала запустите автоматическую парковку для безопасного позиционирования (парковка печатающей головы и поиск нуля по X, Y и Z) либо продолжите перемещение — программные концевики будут отключены.`,homeZ:`Автопарковка`,moveAnyway:`Всё равно переместить`,homingStarted:`Выполняется автопарковка…`},permission:{noAdd:`У вас нет разрешения на добавление принтеров`,noEdit:`У вас нет разрешения на изменение принтеров`,noDelete:`У вас нет разрешения на удаление принтеров`,noControl:`У вас нет разрешения на управление принтерами`,noFiles:`У вас нет разрешения на доступ к файлам принтера`,noAmsRfid:`У вас нет разрешения на повторное считывание RFID AMS`,noSmartPlugControl:`У вас нет разрешения на управление умными розетками`,noCamera:`У вас нет разрешения на просмотр камер`},modal:{addTitle:`Добавить принтер`,editTitle:`Изменить принтер`,myPrinter:`Мой принтер`,selectModel:`Выберите модель…`,locationGroup:`Расположение / группа (необязательно)`,locationPlaceholder:`например: Мастерская, Офис, Подвал`,autoArchiveLabel:`Автоматически архивировать завершённые печати`,fromPrinterSettings:`Из настроек принтера`,modelOptional:`Модель (необязательно)`,saveChanges:`Сохранить изменения`},skipObjects:{tooltip:`Пропустить объекты`,onlyWhilePrinting:`Пропуск объектов доступен только во время печати`,requiresMultiple:`Для пропуска требуется не менее двух объектов`,title:`Пропустить объекты`,matchIdsInfo:`Сопоставьте идентификаторы с экраном принтера`,printerShowsIds:`На экране принтера отображаются идентификаторы объектов на пластине`,skipSelected:`Пропустить выбранные`,skipping:`Пропуск…`,noObjectsSelected:`Объекты не выбраны`,selectObjectsToSkip:`Выберите объекты, которые нужно исключить из текущей печати`,skipped:`пропущен`,objectsSkipped:`Объекты пропущены`,activeCount:`Активно: {{count}}`,waitForLayer:`Пропуск объектов доступен со второго слоя (сейчас слой {{layer}})`,skip:`Пропустить`,confirmTitle:`Пропустить объект?`,confirmMessage:`Пропустить объект «{{name}}»? Это действие нельзя отменить.`,confirmAllMessage:`Выбраны все оставшиеся объекты. Это остановит задание печати. Продолжить?`,confirmMultipleMessage:`Пропустить выбранные объекты ({{count}})? Это действие нельзя отменить.`},confirm:{deleteTitle:`Удалить принтер`,deleteMessage:`Удалить принтер «{{name}}»? Все параметры подключения будут удалены.`,deleteArchivesNote:`Вся история печати этого принтера будет удалена безвозвратно.`,keepArchivesNote:`История печати сохранится, но больше не будет связана с этим принтером.`,stopTitle:`Остановить печать`,stopMessage:`Остановить текущую печать на принтере «{{name}}»? Задание будет отменено.`,stopButton:`Остановить печать`,pauseTitle:`Приостановить печать`,pauseMessage:`Приостановить текущую печать на принтере «{{name}}»?`,pauseButton:`Приостановить печать`,resumeTitle:`Продолжить печать`,resumeMessage:`Продолжить печать на принтере «{{name}}»?`,resumeButton:`Продолжить печать`,powerOnTitle:`Включить принтер`,powerOnMessage:`Включить питание принтера «{{name}}»?`,powerOnButton:`Включить питание`,powerOffTitle:`Выключить принтер`,powerOffMessage:`Выключить питание принтера «{{name}}»?`,powerOffWarning:`ВНИМАНИЕ: принтер «{{name}}» сейчас печатает. Выключение питания прервёт печать и может повредить принтер. Продолжить?`,powerOffButton:`Выключить питание`,haToggleTitle:`Переключить «{{name}}»`,haToggleMessage:`Переключить сущность Home Assistant {{entity}}? Если она сейчас включена, питание может отключиться.`,haToggleWarning:`ВНИМАНИЕ: принтер «{{name}}» сейчас печатает. Переключение {{entity}} может отключить питание и прервать печать. Продолжить?`,haToggleButton:`Переключить`},bulk:{select:`Выбрать`,selectAll:`Выбрать все`,selectByLocation:`Выбрать по расположению`,selected:`Выбрано: {{count}}`,actions:{stop:`Стоп`,pause:`Пауза`,resume:`Продолжить`,clearPlate:`Освободить стол`,clearHMS:`Очистить уведомления`},confirm:{stopTitle:`Остановить печати: {{count}}`,stopMessage:`Активные печати на {{count}} принтерах будут отменены. Это действие нельзя отменить.`,stopButton:`Остановить все`,pauseTitle:`Приостановить печати: {{count}}`,pauseMessage:`Активные печати на {{count}} принтерах будут приостановлены.`,pauseButton:`Приостановить все`,clearPlateTitle:`Освободить столы: {{count}}`,clearPlateMessage:`Столы на {{count}} принтерах будут отмечены как свободные; после этого могут запуститься задания из очереди.`,clearPlateButton:`Освободить все`},success:`Действие «{{action}}» выполнено на {{count}} принтерах`,partial:`Успешно: {{succeeded}}, с ошибкой: {{failed}}`,noneApplicable:`Ни один из выбранных принтеров не находится в подходящем состоянии`,selectByState:`Выбрать по состоянию`},discovery:{title:`Поиск принтеров`,searching:`Поиск…`,scanning:`Сканирование…`,scanProgress:`Сканирование: {{scanned}}/{{total}}`,foundPrinters:`Найдено принтеров: {{count}}`,noPrintersFound:`Принтеры не найдены`,noPrintersFoundSubnet:`В указанной подсети принтеры не найдены.`,noPrintersFoundNetwork:`Принтеры в сети не найдены.`,allConfigured:`Все найденные принтеры уже настроены.`,alreadyAdded:`Уже добавлен`,select:`Выбрать`,manualEntry:`Добавить вручную`,addFromCloud:`Добавить из облака`,subnetToScan:`Подсеть для сканирования`,dockerNote:`Обнаружен Docker. Укажите подсеть принтера в формате CIDR. В docker-compose.yml требуется network_mode: host.`,scanSubnet:`Сканировать подсеть`,discoverNetwork:`Найти принтеры в сети`,scanningSubnet:`Поиск принтеров Bambu в подсети…`,scanningNetwork:`Сканирование сети…`,serialRequired:`Требуется серийный номер`,unknown:`Неизвестно`,failedToStart:`Не удалось запустить поиск`,customSubnetOption:`Другая подсеть…`,customSubnetLabel:`Другая подсеть (CIDR)`,customSubnetNote:`Используйте другую подсеть, если принтер находится в иной сети. Порты FTP (990) и MQTT (8883) должны быть доступны через маршрутизатор.`},drying:{start:`Начать сушку`,stop:`Остановить сушку`,temperature:`Температура`,duration:`Продолжительность`,hours:`ч`,timeRemaining:`осталось {{time}}`,active:`Сушка`,targetSummary:`{{filament}} при {{temp}} °C`,notSupported:`Сушка не поддерживается`,powerRequired:`Подключите адаптер питания AMS, чтобы включить сушку`,cannotDryNow:`AMS сейчас не может начать сушку`,startingDrying:`Запуск сушки...`,toastCommandSent:`Команда сушки отправлена`,toastStopped:`Сушка остановлена`,toastNotStarted:`Принтер принял команду, но AMS не начал сушку. Убедитесь, что адаптер питания AMS подключён, а принтер не занят.`,screenOnly:`На этом принтере управлять сушкой AMS можно только с экрана самого принтера (ограничение Bambu)`,stoppingDrying:`Остановка сушки...`,rotateTray:`Вращать катушку во время сушки`,rotateUnavailableReason:`Недоступно: слот этого AMS сейчас подаёт филамент в печатающую головку. Катушка зафиксирована подающей трубкой и не может вращаться. Сначала выгрузите филамент.`,startMode:`Время начала`,modeNow:`Сейчас`,modeDelay:`После задержки`,modeAtTime:`По времени`,schedule:`Запланировать`,scheduledFor:`Сушка запланирована на {{time}}`,scheduledAsap:`Сушка запланирована (ожидание принтера)`,cancelScheduled:`Отменить запланированную сушку`,scheduleFailed:`Не удалось запланировать сушку`,retractFilament:`Извлеките филамент из выхода AMS, чтобы начать сушку`,waitingAmsNotFound:`Ожидание обнаружения AMS`,waitingOffline:`Ожидание подключения принтера`,waitingPrinterBusy:`Ожидание освобождения принтера`,waitingAlreadyDrying:`Ожидание завершения текущего цикла сушки`,waitingInterrupted:`Прервано, возобновится, когда принтер освободится`,scheduleFailedReason:`Не удалось выполнить запланированную сушку: {{reason}}`,scheduleFailedUnknown:`Неизвестная ошибка`,dismissFailed:`Скрыть`},amsBackup:{titleOn:`Резервный филамент AMS включён. Нажмите, чтобы отключить.`,titleOff:`Резервный филамент AMS выключен. Нажмите, чтобы включить.`,titleUnknown:`Состояние резервного филамента AMS недоступно для этого принтера.`,toastEnabled:`Резервный филамент AMS включён`,toastDisabled:`Резервный филамент AMS отключён`,modalTitle:`Резервный филамент AMS`,modalHelp:`Когда активный слот опустеет, принтер по очереди использует подходящие слоты с тем же профилем и цветом в указанном порядке.`,modalNoSlots:`Филамент не загружен.`,modalNoPairs:`Резервных пар нет: ни у двух слотов не совпадают профиль филамента и цвет.`,extruderRightShort:`П`,extruderLeftShort:`Л`,stateOn:`Включено`,stateOff:`Отключено`,stateUnknown:`Не поддерживается этим принтером`},activeJobSlot:{title:`Этот слот используется как филамент {{n}} в текущей печати`,ariaLabel:`Слот {{n}} текущей печати`},expectedSlot:{title:`Принтер ожидает филамент в этом слоте`,ariaLabel:`Ожидаемый слот филамента {{n}}`,label:`{{ams}} · Слот {{slot}}`,external:`Внешняя катушка`},filaments:`Филаменты`,externalSpool:{hide:`Скрыть внешнюю катушку`,show:`Показать внешнюю катушку`},openCameraOverlay:`Открыть камеру поверх интерфейса`,openCameraWindow:`Открыть камеру в новом окне`,firmwareUpdateAvailable:`Доступно обновление прошивки: {{current}} → {{latest}}`,firmwareUpToDate:`Прошивка {{version}} — актуальная версия`,firmwareUpdateButton:`Обновить`,plateDetection:{noPermission:`У вас нет прав на изменение настроек принтера`,enabledClick:`Проверка пластины включена — нажмите, чтобы отключить`,disabledClick:`Проверка пластины отключена — нажмите, чтобы включить`,manageCalibration:`Управление калибровкой проверки пластины`,calibrationRequired:`Требуется калибровка`,calibrationInstructions:`Убедитесь, что печатная пластина <strong>полностью пустая</strong>, затем нажмите «Калибровать».`,calibrationDescription:`При калибровке сохраняется эталонное изображение пустой пластины. При последующих проверках система сравнивает снимок с эталоном и обнаруживает посторонние объекты.`,calibrationTip:`<strong>Совет:</strong> можно сохранить до 5 калибровок для разных пластин. При проверке система автоматически выберет наиболее подходящий эталон.`,plateEmpty:`Пластина выглядит пустой`,objectsDetected:`На пластине обнаружены объекты`,confidence:`Уверенность`,difference:`Различие`,analysisPreview:`Предпросмотр анализа:`,analysisLegend:`Зелёная рамка — область обнаружения, красная заливка — отличия от калибровочного снимка`,savedReferences:`Сохранённые эталоны ({{count}}/{{max}})`,deleteReference:`Удалить эталон`,labelPlaceholder:`Метка...`,clickToEdit:`{{label}} — нажмите для изменения`,clickToAddLabel:`Нажмите, чтобы добавить метку`},speed:{title:`Скорость печати`,silent:`Тихий (50%)`,standard:`Стандартный (100%)`,sport:`Спортивный (124%)`,ludicrous:`Безумный (166%)`},airduct:{title:`Режим воздуховода`,cooling:`Охлаждение`,heating:`Нагрев`},noSdCard:`Нет SD-карты`,door:{open:`Открыта`,closed:`Закрыта`},fans:{partCooling:`Вентилятор обдува модели`,auxiliary:`Дополнительный вентилятор`,leftAuxiliary:`Левый дополнительный вентилятор`,exhaust:`Вытяжка`,chamber:`Вентилятор камеры`},clickToViewHmsErrors:`Нажмите, чтобы посмотреть ошибки HMS`,aiDetection:{safe:`Безопасно`,warning:`Предупреждение`,failure:`Сбой`,idle:`Ожидает`,error:`Не проверяется`,unknown:`Запуск`,tooltipError:`Обнаружение сбоев с помощью ИИ не проверяет эту печать: {{reason}} - нажмите для подробностей`,tooltipUnknown:`Обнаружение сбоев с помощью ИИ: ожидание первого результата - нажмите для подробностей`,errorHint:`Эта печать не проверяется. Обнаружение возобновится автоматически после устранения проблемы, указанной ниже.`,tooltip:`Обнаружение сбоев с помощью ИИ: {{status}} (оценка {{score}}) - нажмите для подробностей`,tooltipIdle:`Обнаружение сбоев с помощью ИИ включено - мониторинг начнётся со следующей печати - нажмите для подробностей`,modalTitle:`Обнаружение сбоев с помощью ИИ - {{name}}`,currentStatus:`Статус`,score:`Оценка`,framesAnalyzed:`Проанализировано кадров`,idleHint:`Сейчас ни одна печать не отслеживается. Мониторинг начнётся автоматически со следующей печати.`,lastError:`Последняя ошибка`,openSettings:`Открыть настройки`},estimatedCompletion:`Расчётное время завершения`,plateNumber:`Пластина {{number}}`,slotOptions:`Параметры слота`,amsPopup:{friendlyName:`Имя AMS`,friendlyNamePlaceholder:`Например, левый AMS`,serialNumber:`Серийный номер`,firmwareVersion:`Прошивка`,save:`Сохранить`,clear:`Очистить`,noEditPermission:`У вас нет прав на переименование модулей AMS`},firmwareModal:{title:`Обновление прошивки`,titleUpToDate:`Сведения о прошивке`,currentVersion:`Текущая:`,latestVersion:`Последняя:`,releaseNotes:`Примечания к выпуску`,checkingPrereqs:`Проверка условий...`,sdCardReady:`SD-карта готова. Нажмите ниже, чтобы загрузить прошивку.`,uploadedSuccess:`Прошивка загружена на SD-карту!`,applyInstructions:`Чтобы установить обновление на принтер:`,step1:`На экране принтера откройте <strong>Настройки</strong>`,step2:`Перейдите в раздел <strong>Прошивка</strong>`,step3:`Выберите <strong>Обновить с SD-карты</strong>`,step4:`Обновление займёт 10–20 минут`,done:`Готово`,starting:`Запуск...`,uploadFirmware:`Загрузить прошивку`,uploadFailed:`Не удалось начать загрузку: {{error}}`,uploadedToast:`Прошивка загружена. Запустите обновление с экрана принтера.`,availableVersions:`Доступные версии`,usable:`Доступна`,unavailable:`Недоступна`,installed:`Установлена`,newerBadge:`новее`,olderBadge:`старее`,currentBadge:`текущая`},accessCodePlaceholder:`Оставьте пустым, чтобы сохранить текущий`,roi:{title:`Область обнаружения (ROI)`,xStart:`Начало X`,yStart:`Начало Y`,width:`Ширина`,height:`Высота`,instruction:`Настройте область обнаружения так, чтобы она охватывала печатную пластину. Зелёная рамка в предпросмотре показывает текущую область.`},developerModeWarning:`Режим LAN для разработчиков не включён на: {{names}}. Некоторые функции могут не работать.`,howToEnable:`Как включить`,incompatibleFile:`Файл подготовлен для {{slicedFor}}, а выбранный принтер — {{printerModel}}`,dropNotPrintable:`Для печати подходят только файлы .gcode и .gcode.3mf`,dropToPrint:`Перетащите файл для печати`,dropToQueue:`Перетащите файл в очередь`},archives:{media:{title:`Видео печати`,download:`Скачать видео печати`,searching:`Поиск видео на принтере…`,searchFailed:`Не удалось проверить видео на принтере.`,none:`Для этой печати не найдены таймлапсы или фрагменты IP-камеры.`,attachedTimelapse:`Прикреплённый таймлапс`,printerFiles:`Файлы, оставшиеся на принтере`,downloadSelected:`Скачать выбранное`,printerMissing:`Принтер больше не настроен`,timelapseUnavailable:`Не удалось прочитать каталог таймлапсов`,ipcamUnavailable:`Не удалось прочитать каталог IP-камеры`},title:`Архив печати`,no3mfBanner:{title:`Некоторые последние задания сохранены без миниатюр`,body:`Слайсер не оставил файл .gcode.3mf на SD-карте принтера, поэтому Bambuddy не смог получить миниатюру и метаданные слайсера. Обычно это происходит, если в слайсере отключена настройка «Сохранять отправленные файлы во внешнем хранилище» (вкладка «Устройство» в Bambu Studio / OrcaSlicer).`,docsLink:`См. шаг 4 установки`,docsLinkInternalStorage:`Почему так происходит`,titleInternalStorage:`Некоторые недавние печати остались во внутренней памяти принтера`,bodyInternalStorage:`Bambu Studio сохранил нарезанный файл во внутренней памяти принтера, а не на карте, поэтому Bambuddy было нечего читать по FTP. На серии H2, P2S и X2D кнопка «Печать» всегда делает так: выбор есть только в «Отправить», и там по умолчанию тоже «Кэш». Эти печати по-прежнему архивируются с именем и временем, только без миниатюры и метаданных слайсера. Чтобы архивы были полными, запускайте печать из Bambuddy или нарезайте в OrcaSlicer, либо в Bambu Studio используйте «Отправить» с «Внешним накопителем», а печать запускайте после этого. Во всех случаях в принтере нужна карта или флешка.`,titleNoExternalStorage:`Некоторые недавние печати не удалось архивировать — в принтере нет накопителя`,bodyNoExternalStorage:`Принтер не видит ни карты, ни флешки в слоте, поэтому нарезанному файлу некуда было попасть, а Bambuddy нечего читать. Вставьте накопитель, и следующая печать будет заархивирована полностью.`,titleInternalHistory:`Некоторые недавние печати запущены из файла, который уже был на принтере`,bodyInternalHistory:`Эти печати шли из собственной библиотеки принтера — повторная печать с его экрана, запуск из Handy или файл, отправленный раньше и напечатанный позже. Bambuddy читает файлы печати по FTP, а он отдаёт только карту или флешку, тогда как принтер держит эту библиотеку в области, куда FTP не достаёт, — читать 3MF было негде. Настройки слайсера тут ничего не меняют: для этих печатей ничего не отправлялось. Они по-прежнему архивируются с именем и временем, а в «Редактировании архива» израсходованный филамент можно указать вручную. Чтобы архив был полным, запускайте печать из Bambuddy или из своего слайсера.`,titleFtpsCooloff:`Некоторые недавние печати не удалось заархивировать — принтер отклонил файловое соединение`,bodyFtpsCooloff:`Bambuddy открыл порт передачи файлов принтера (FTPS 990), и принтер ответил чем-то, что не является TLS, поэтому прочитать с него ничего не удалось. Эти печати всё равно сохранены в архиве с названием и временем, только без миниатюры и метаданных слайсера. Это не настройка слайсера и не то, что вы меняли: те же модели и прошивки нормально работают на других установках, а затронутый принтер обычно позже начинает работать сам. После такой ошибки Bambuddy приостанавливает передачи к этому принтеру на пять минут и возвращается за файлом, когда пауза заканчивается, поэтому короткий эпизод исправляется сам; если карточка так и осталась пустой, значит отказ продлился дольше повторной попытки. Что именно это вызывает, пока неизвестно. Если повторяется, включите отладочное журналирование на странице Система и приложите пакет поддержки к своему сообщению.`,titleFtpTransferFailed:`Некоторые недавние печати не удалось заархивировать — передача файла не уложилась во время`,bodyFtpTransferFailed:`Нарезанный файл лежал на карте принтера, и принтер его действительно отдавал, но передача не завершилась за отведённое время. В момент старта печати принтер одновременно обслуживает камеру, сообщения о состоянии и загрузку задания, и крупный 3MF не всегда успевает пройти на этом фоне. Эти печати по-прежнему заархивированы с названием и временем, только без миниатюры и данных слайсера. Это не настройка слайсера и не следствие ваших изменений. Bambuddy возвращается за файлом ещё три раза в течение следующих десяти минут, поэтому большинство таких случаев закрываются сами; если карточка так и осталась пустой, значит и все эти попытки не уложились во время. Если это повторяется, увеличьте Таймаут подключения в разделе Настройки > Сеть > Повтор FTP.`,dismissLabel:`Закрыть это уведомление`},searchPlaceholder:`Поиск в архиве...`,filterByPrinter:`Фильтр по принтеру`,filterByStatus:`Фильтр по состоянию`,sortBy:`Сортировать по`,sortNewest:`Сначала новые`,sortOldest:`Сначала старые`,sortName:`Названию`,sortDuration:`Длительности`,sortLargest:`Сначала большие`,sortSmallest:`Сначала маленькие`,sortSize:`Размеру`,noArchives:`Архивы не найдены`,noArchivesSearch:`По вашему запросу ничего не найдено`,originalPrintNotVisible:`Исходная печать не отображается — попробуйте сбросить фильтры`,noArchivesYet:`Архив пока пуст`,prints:`печатей`,pagination:{showing:`Показано`,to:`–`,of:`из`,show:`Показывать`,page:`Страница`,all:`Все`},loadingArchives:`Загрузка архива...`,releaseToUpload:`Отпустите файлы для загрузки`,showAll:`Показать все`,showFavoritesOnly:`Только избранное`,gridView:`Плитка`,listView:`Список`,calendarView:`Календарь`,logView:`Журнал печати`,manageTags:`Управление тегами`,showFailedPrints:`Показывать неудачные печати`,hideFailedPrints:`Скрывать неудачные печати`,hideDuplicates:`Скрывать дубликаты`,viewOriginalPrint:`Открыть исходную печать №{{id}}`,printTime:`Время печати`,filamentUsed:`Израсходовано филамента`,cost:`Стоимость`,preview:`Предпросмотр`,deleteArchive:`Удалить запись из архива`,deleteConfirm:`Удалить эту запись из архива?`,favorite:`В избранное`,unfavorite:`Удалить из избранного`,viewDetails:`Подробнее`,status:{completed:`Завершено`,failed:`Ошибка`,stopped:`Остановлено`},toast:{source3mfAttached:`Исходный 3MF прикреплён: {{filename}}`,failedUploadSource3mf:`Не удалось загрузить исходный 3MF`,source3mfRemoved:`Исходный 3MF удалён`,failedRemoveSource3mf:`Не удалось удалить исходный 3MF`,f3dAttached:`F3D прикреплён: {{filename}}`,failedUploadF3d:`Не удалось загрузить F3D`,f3dRemoved:`F3D удалён`,failedRemoveF3d:`Не удалось удалить F3D`,timelapseAttached:`Таймлапс прикреплён: {{filename}}`,timelapseAlreadyAttached:`Таймлапс уже прикреплён`,noMatchingTimelapse:`Подходящий таймлапс не найден`,failedScanTimelapse:`Не удалось найти таймлапс`,failedAttachTimelapse:`Не удалось прикрепить таймлапс`,timelapseRemoved:`Таймлапс удалён`,failedRemoveTimelapse:`Не удалось удалить таймлапс`,timelapseUploaded:`Таймлапс загружен: {{filename}}`,failedUploadTimelapse:`Не удалось загрузить таймлапс`,archiveDeleted:`Запись удалена из архива`,failedDeleteArchive:`Не удалось удалить запись из архива`,addedToFavorites:`Добавлено в избранное`,removedFromFavorites:`Удалено из избранного`,projectUpdated:`Проект обновлён`,failedUpdateProject:`Не удалось обновить проект`,linkCopied:`Ссылка скопирована`,failedCopyLink:`Не удалось скопировать ссылку`,photoDeleted:`Фотография удалена`,failedDeletePhoto:`Не удалось удалить фотографию`,failedDeleteArchives:`Не удалось удалить записи из архива`,failedUpdateFavorites:`Не удалось обновить избранное`,exportDownloaded:`Экспортированный файл скачан`,exportFailed:`Ошибка экспорта`},menu:{print:`Печать`,openInBambuStudio:`Открыть в слайсере`,slice:`Нарезать`,externalLink:`Внешняя ссылка`,viewOnMakerWorld:`Открыть на MakerWorld`,preview3d:`3D-просмотр`,viewTimelapse:`Посмотреть таймлапс`,scanForTimelapse:`Найти таймлапс`,uploadTimelapse:`Загрузить таймлапс`,removeTimelapse:`Удалить таймлапс`,downloadSource3mf:`Скачать исходный 3MF`,uploadSource3mf:`Загрузить исходный 3MF`,replaceSource3mf:`Заменить исходный 3MF`,removeSource3mf:`Удалить исходный 3MF`,uploadF3d:`Загрузить F3D`,replaceF3d:`Заменить F3D`,downloadF3d:`Скачать F3D`,removeF3d:`Удалить F3D`,download:`Скачать`,copyDownloadLink:`Скопировать ссылку для скачивания`,qrCode:`QR-код`,viewPhotos:`Посмотреть фотографии`,viewPhotosCount:`Фотографии ({{count}})`,projectPage:`Страница проекта`,addToFavorites:`Добавить в избранное`,removeFromFavorites:`Удалить из избранного`,edit:`Изменить`,printLog:`Журнал печати`,goToProject:`Открыть проект: {{name}}`,addToProject:`Добавить в проект`,removeFromProject:`Удалить из проекта`,loading:`Загрузка...`,noProjectsAvailable:`Нет доступных проектов`,searchProjects:`Поиск проектов…`,select:`Выбрать`,deselect:`Снять выделение`,delete:`Удалить`},permission:{noReprint:`У вас нет разрешения на повторную печать этой записи`,noAddToQueue:`У вас нет разрешения на добавление в очередь`,noUpdateArchives:`У вас нет разрешения на изменение архива`,noUploadFiles:`У вас нет разрешения на загрузку файлов`,noDownload:`У вас нет разрешения на скачивание файлов из архива`,noCopyLink:`У вас нет разрешения на копирование ссылок для скачивания`,noDelete:`У вас нет разрешения на удаление этой записи`,noEdit:`У вас нет разрешения на изменение этой записи`,noCreate:`У вас нет разрешения на создание записей в архиве`},platePicker:{title:`Выберите пластину для предпросмотра`,hint:`В этой записи несколько пластин. Выберите пластину, которую нужно открыть в просмотрщике G-code.`,plateLabel:`Пластина {{index}}`,objectCount:`{{count}} объект`,objectCount_plural:`{{count}} объектов`,noGcode:`В этой записи нет нарезанного G-code для предпросмотра. Сначала откройте файл в Bambu Studio и выполните нарезку.`},card:{previousPlate:`Предыдущая пластина`,nextPlate:`Следующая пластина`,plateNumber:`Пластина {{index}}`,moreOptions:`Щёлкните правой кнопкой для дополнительных действий`,addToFavorites:`Добавить в избранное`,removeFromFavorites:`Удалить из избранного`,cancelled:`отменено`,failed:`ошибка`,duplicate:`дубликат`,duplicateTitle:`Эта модель уже печаталась`,openSource3mf:`Открыть исходный 3MF в Bambu Studio (щёлкните правой кнопкой для дополнительных действий)`,downloadF3d:`Скачать файл проекта Fusion 360`,viewTimelapse:`Посмотреть таймлапс`,viewPhoto:`Посмотреть фотографию`,viewPhotos:`Посмотреть фотографии: {{count}}`,openFolder:`Открыть папку: {{name}}`,slicedFile:`Нарезанный файл — готов к печати`,sourceFile:`Только исходный файл — сопоставление AMS недоступно`,gcode:`G-CODE`,source:`ИСХОДНИК`,project:`Проект: {{name}}`,runsBadge:`Печатей: {{count}}`,runsBadgeTitle:`Всего печатей: {{count}}, успешных: {{successful}}, неудачных: {{failed}}. Нажмите, чтобы открыть полный журнал.`,estimated:`Расчётное время: {{time}}`,actual:`Фактическое время: {{time}}`,accuracy:`Точность оценки: {{percent}}%`,filament:`{{weight}} г`,layer:`{{count}} слой`,layers:`{{count}} слоёв`,object:`{{count}} объект`,objects:`{{count}} объектов`,slicedFor:`Нарезано для {{model}}`,uploadedBy:`Загрузил`,noPermissionReprint:`У вас нет разрешения на повторную печать`,noFileForReprint:`Файл 3MF недоступен: при сохранении задания не удалось скачать его с принтера`,slicerAmsMapping:`Маппинг AMS сохранён ({{printer}})`,slicerAmsMappingTooltip:`Выбор ячеек AMS, сделанный слайсером, сохранён для принтера {{printer}}. Номера ячеек имеют смысл только на нём, поэтому повторная печать использует их только при отправке снова на {{printer}}.`,noPermissionEdit:`У вас нет разрешения на изменение архива`,noPermissionDelete:`У вас нет разрешения на удаление записей из архива`,openInBambuStudio:`Открыть в слайсере`,openInBambuStudioToSlice:`Открыть в слайсере для нарезки`,slice:`Нарезать`,externalLink:`Внешняя ссылка`,makerWorld:`MakerWorld: {{designer}}`,viewProject:`Открыть проект`,noExternalLink:`Внешняя ссылка не указана`,preview3d:`3D-просмотр`,download:`Скачать`,edit:`Изменить`,delete:`Удалить`},runLog:{title:`Журнал печати`,modalTitle:`Журнал печати — {{name}}`,modalTitleFallback:`эта запись`,empty:`Для этой записи пока нет событий печати.`,col:{date:`Дата`,status:`Состояние`,duration:`Длительность`,filament:`Филамент`,cost:`Стоимость`},status:{completed:`Завершено`,failed:`Ошибка`,cancelled:`Отменено`,stopped:`Остановлено`,skipped:`Пропущено`,printing:`Печать`}},modal:{deleteArchive:`Удаление записи из архива`,deleteConfirm:`Удалить «{{name}}»? Это действие нельзя отменить.`,deleteButton:`Удалить`,deletePurgeStats:`Также исключить эту печать из краткой статистики: филамент, время, стоимость и энергия`,deleteQueueItemsWarning:`Также будут удалены связанные элементы очереди: {{count}}.`,deleteBlockedByPrinting:`Удаление невозможно: сейчас печатаются связанные элементы очереди ({{count}}). Сначала остановите печать.`,removeSource3mf:`Удаление исходного 3MF`,removeSource3mfConfirm:`Удалить исходный файл 3MF из «{{name}}»? Исходный проект слайсера будет удалён.`,removeButton:`Удалить`,removeF3d:`Удаление F3D`,removeF3dConfirm:`Удалить файл проекта Fusion 360 из «{{name}}»?`,removeTimelapse:`Удаление таймлапса`,removeTimelapseConfirm:`Удалить видео таймлапса из «{{name}}»?`,timelapse:`{{name}} — таймлапс`,selectTimelapse:`Выбор таймлапса`,selectTimelapseDesc:`Автоматически найти совпадение не удалось. Выберите таймлапс для этой печати:`,deleteArchives:`Удаление записей из архива`,deleteArchivesConfirm:`Удалить записи из архива ({{count}})? Это действие нельзя отменить.`,deleteCount:`Удалить: {{count}}`},page:{title:`Архив`,printsCount:`Показано {{filtered}} из {{total}} печатей`,dropFilesHere:`Перетащите сюда файлы .3mf`,releaseToUpload:`Отпустите файлы для загрузки`,only3mfSupported:`Поддерживаются только файлы .3mf`,close:`Закрыть`,selected:`Выбрано: {{count}}`,selectAll:`Выбрать все`,tags:`Теги`,project:`Проект`,favorite:`Избранное`,delete:`Удалить`,toggledFavorites:`Избранное изменено для записей: {{count}}`,failedUpdateFavorites:`Не удалось обновить избранное`,archivesDeleted:`Удалено записей: {{count}}`,failedDeleteArchives:`Не удалось удалить записи из архива`,photoDeleted:`Фотография удалена`,failedDeletePhoto:`Не удалось удалить фотографию`},list:{name:`Название`,printer:`Принтер`,date:`Дата`,size:`Размер`,actions:`Действия`,hasTimelapse:`Есть таймлапс`},log:{date:`Дата`,printName:`Название печати`,printer:`Принтер`,user:`Пользователь`,status:`Состояние`,duration:`Длительность`,filament:`Филамент`,filamentUsed:`Израсходовано филамента`,cost:`Стоимость`,energy:`Энергия`,energyCost:`Стоимость энергии`,completedAt:`Завершено`,columns:`Столбцы`,sortBy:`Сортировать по: {{column}}`,allPrinters:`Все принтеры`,allUsers:`Все пользователи`,allStatuses:`Все состояния`,cancelled:`Отменено`,skipped:`Пропущено`,dateFrom:`С`,dateTo:`По`,noEntries:`Записи журнала не найдены`,showing:`Показано {{count}} из {{total}} записей`,rowsPerPage:`Строк`,page:`Страница`,prev:`Назад`,next:`Далее`,clearLog:`Очистить журнал`,clearLogTitle:`Очистка журнала печати`,clearLogConfirm:`Все записи журнала печати будут удалены без возможности восстановления. Архив и очередь не изменятся. Продолжить?`,clearLogButton:`Очистить всё`,cleared:`Удалено записей журнала: {{count}}`,clearFailed:`Не удалось очистить журнал печати`,deleteEntryTitle:`Удаление записи журнала`,deleteEntryConfirm:`Запись будет удалена из журнала, а её вклад в расход филамента, время и стоимость исчезнет из краткой статистики. Связанная запись архива, если она существует, не изменится. Это действие нельзя отменить.`,entryDeleted:`Запись журнала удалена`,entryDeleteFailed:`Не удалось удалить запись журнала`,editEntryTitle:`Изменение записи журнала`,editEntryDescription:`Укажите результат этой печати. Виджет анализа отказов группирует данные по этим значениям, поэтому изменения сразу отразятся в статистике.`,entryUpdated:`Запись журнала обновлена`,entryUpdateFailed:`Не удалось обновить запись журнала`,statuses:{completed:`Завершено`,failed:`Ошибка`,stopped:`Остановлено`,cancelled:`Отменено`,skipped:`Пропущено`}}},dispatchToast:{untitled:`Задание печати`,startingPrints:`Запуск печати`,progressSummary:`Завершено: {{complete}}/{{total}} • Обрабатывается: {{processing}}`,expandDetails:`Показать подробности отправки`,collapseDetails:`Скрыть подробности отправки`,awaitingPrinter:`Ожидание принтера…`,status:{processing:`Обработка`,completed:`Завершено`,failed:`Ошибка`},failed:{generic:`Не удалось отправить задание`,upload_failed:`Не удалось загрузить файл на принтер`,start_command_failed:`Принтер отклонил команду запуска`},dismiss:`Закрыть`},pipelineRuns:{title:`Запуски конвейеров`,loading:`Загрузка…`,empty:`Конвейеры ещё не запускались.`,filter:{pipeline:`Конвейер`,status:`Состояние`,target:`Назначение`,all:`Все`,allPipelines:`Все конвейеры`,allStatus:`Все состояния`,allTargets:`Все назначения`,clear:`Сбросить фильтры`,noMatches:`Нет запусков, соответствующих выбранным фильтрам.`},totalCount_one:`{{n}} запуск`,totalCount_other:`{{n}} запусков`,copies:`Копий: {{n}}`,failedCount:`Ошибок: {{n}}`,copyN:`Копия {{n}}`,retryFailed:`Повторить неудачные`,retryOf:`повтор запуска №{{n}}`,pagination:`{{start}}–{{end}} из {{total}}`,cancelledByUser:`Отменено пользователем`,toast:{cancelled:`Запуск отменён`,cancelFailed:`Не удалось отменить запуск`,retryStarted:`Повторный запуск начат`,retryFailed:`Повторный запуск не удался`,cleared:`Удалено запусков: {{n}}`,clearFailed:`Не удалось очистить журнал`},clearLog:`Очистить журнал`,clearConfirmTitle:`Очистить журнал?`,clearConfirmBody:`Удалить все завершённые, неудачные, отменённые и частично неудачные запуски конвейеров? Выполняющиеся запуски сохранятся. Это действие нельзя отменить.`,clearConfirmAction:`Очистить`,jobStatus:{pending:`ожидание`,awaiting_printer:`ожидание принтера`,queued:`в очереди`,printing:`печать`,completed:`завершено`,failed:`ошибка`,cancelled:`отменено`}},queue:{title:`Очередь печати`,subtitle:`Планирование и управление заданиями печати`,filamentShort:{rowBadge:`Для назначенной катушки недостаточно филамента`,rowTooltip:`Планировщик отметил это задание. Нажмите «Запустить», чтобы увидеть нехватку по каждому слоту и решить, печатать ли всё равно.`,confirmTitle:`Недостаточно филамента`,confirmIntro:`Назначенной катушки недостаточно как минимум для одного слота. Всё равно запустить печать?`,lineItem:`Слот {{slot}}: требуется {{required}} г, осталось {{remaining}} г`,unknown:`неизвестно`,printAnyway:`Всё равно печатать`},slicerAmsMapping:{rowBadge:`Ячейки AMS сохранены для этого принтера`,rowTooltip:`У этого архива сохранены точные ячейки AMS, выбранные слайсером, — для принтера, на который нацелено это задание. Повторная печать на нём может использовать те же катушки вместо повторного подбора по типу и цвету.`},editQueueItem:`Изменить задание в очереди`,selectAllPlates:`Выбрать все пластины ({{count}})`,deselectAll:`Снять выделение`,printQueued:`Задание добавлено в очередь`,printQueuedWillStartWhenIdle:`Запустится, когда принтер освободится`,itemsQueued:`Добавлено в очередь: {{count}}`,sending:`Отправка...`,sendingProgress:`Отправка {{current}} из {{total}}...`,adding:`Добавление...`,addingProgress:`Добавление {{current}} из {{total}}...`,savingProgress:`Сохранение {{current}} из {{total}}...`,clearQueue:`Очистить очередь`,clearHistory:`Очистить историю`,emptyQueue:`Очередь пуста`,position:`Позиция`,scheduledTime:`Запланированное время`,moveUp:`Переместить вверх`,moveDown:`Переместить вниз`,startNow:`Запустить сейчас`,printingInProgress:`Идёт печать...`,viewArchive:`Открыть архив`,viewInFileManager:`Открыть в файловом менеджере`,itemCount:`{{count}} задание`,itemCount_plural:`{{count}} заданий`,dragToReorder:`Перетащите для изменения порядка (только задания «как можно скорее»)`,reorderHint:`Позиция влияет только на задания «как можно скорее». Запланированные задания запускаются в указанное время.`,sjf:{label:`SJF`,tooltip:`Shortest Job First — планировщик отдаёт приоритет более коротким заданиям`},addedBy:`Добавил: {{name}}`,nextInQueue:`Следующее в очереди`,clearPlateSuccess:`Пластина очищена — можно запускать следующую печать`,plateNumber:`Пластина {{index}}`,quantity:`Количество`,quantityHint:`Будет создано заданий: {{count}}`,plateQuantityLabel:`Повторы: {{plate}}`,plateQuantityTotal_one:`Всего запусков: {{count}}`,plateQuantityTotal_other:`Всего запусков: {{count}}`,batchOrders:{title:`Пакетные заказы`,emptyTitle:`Пакетных заказов нет`,emptyDescription:`Поставьте в очередь файл с несколькими столами или несколько копий одного стола — заказ появится здесь вместе с прогрессом.`,filter:{active:`Активные`,completed:`Завершённые`,cancelled:`Отменённые`,all:`Все`},status:{active:`Активен`,completed:`Завершён`,cancelled:`Отменён`},noTargets:`Только группировка`,noTargetsHint:`Создан до появления целевых количеств по столам, поэтому отслеживает поставленные в очередь запуски, а не цель.`,dispatchRemaining:`Поставить в очередь: {{count}}`,dispatchPlate:`Поставить остаток`,strandedPlate:`Нет запуска для копирования настроек`,strandedNotice:`Не удаётся поставить в очередь {{runs}} из {{owed}} ещё не выполненных запусков: для этой пластины не осталось запуска в очереди или завершённого, из которого можно скопировать настройки. Поставьте пластину в очередь один раз из файла или отмените заказ.`,dispatched:`Оставшиеся запуски для «{{name}}» поставлены в очередь`,plateProgress:`Готово {{completed}} из {{target}}`,remaining:`Осталось: {{count}}`,failed:`Неудачных: {{count}}`,printing:`Печатается: {{count}}`,wholeFile:`Весь файл`,due:`Срок: {{date}}`,costSoFar:`{{amount}} потрачено`,costRemaining:`(ещё {{amount}})`},activeBatches:`Активные партии`,batchProgress:`Выполнено {{completed}} из {{total}}`,cancelBatch:`Отменить оставшиеся`,batchCancelled:`Оставшиеся задания партии отменены`,cancelBatchConfirmTitle:`Отменить партию`,cancelBatchConfirmMessage:`Закрыть этот заказ? Запуски, ещё стоящие в очереди, будут отменены, и заказ перестанет требовать то, что не произведено.`,batch:{defaultName:`Партия`,label:`{{count}} задание`,label_plural:`{{count}} заданий`,pendingCount:`Ожидает: {{count}}`,pendingCount_plural:`Ожидают: {{count}}`,expand:`Развернуть партию`,collapse:`Свернуть партию`,groupAsBatch:`Объединить в партию…`,groupAsBatchDescription:`Объединить выбранные задания ({{count}}) в одну сворачиваемую партию.`,nameLabel:`Название партии`,namePlaceholder:`Например: подарки к пятнице`,create:`Создать партию`,ungroup:`Разгруппировать`,ungroupConfirmTitle:`Разгруппировать партию?`,ungroupConfirmMessage:`Задания останутся в очереди, но больше не будут объединены в одну группу.`,dragGroup:`Перетащить группу`},tabs:{batches:`Партии`,queue:`Очередь`,history:`История`,timeline:`Временная шкала`,pipelines:`Конвейеры`},layout:{flatList:`Список`,byPrinter:`По принтерам`,groupByPrinter:`Группировать по принтерам`},history:{emptyTitle:`История пока пуста`,emptyDescription:`Здесь появятся завершённые, отменённые и неудачные задания.`,showMore:`Показать ещё`,showingCount:`Показано {{shown}} из {{total}}`},dragGhost:{multiCount:`{{count}} заданий`,batch:`{{name}} ({{count}} копия)`,batch_plural:`{{name}} ({{count}} копий)`},sections:{currentlyPrinting:`Сейчас печатается`,queued:`В очереди`,history:`История`},status:{pending:`Ожидает`,waiting:`Ожидание`,printing:`Печать`,paused:`Приостановлено`,completed:`Завершено`,failed:`Ошибка`,skipped:`Пропущено`,cancelled:`Отменено`},summary:{printing:`Печатается`,queued:`В очереди`,totalTime:`Общее время очереди`,totalWeight:`Общий вес очереди`,history:`История`},filter:{allPrinters:`Все принтеры`,unassigned:`Не назначено`,allStatus:`Все состояния`,allLocations:`Все расположения`,any:`Любое`},sort:{byPosition:`По позиции`,byName:`По названию`,byPrinter:`По принтеру`,bySchedule:`По времени запуска`,byDate:`По дате`,ascendingOldest:`По возрастанию (сначала старые)`,descendingNewest:`По убыванию (сначала новые)`},badges:{staged:`Подготовлено`,requiresPrevious:`Требуется успешное предыдущее задание`,autoPowerOff:`Автоотключение питания`,gcodeInjection:`G-code`},empty:{title:`Нет запланированных заданий`,description:`Запланируйте печать на странице архива через пункт «Запланировать» в контекстном меню либо перетащите сюда файлы.`},time:{etaIfStartedNow:`Время завершения, если запустить это задание сейчас`,whenFree:`Когда принтер освободится`,overdue:`Просрочено`,now:`Сейчас`,lessThanMinute:`Меньше чем через минуту`,inMinutes:`Через {{count}} мин`,inHours:`Через {{count}} ч`},actions:{startPrint:`Запустить печать`,stopPrint:`Остановить печать`,requeue:`Вернуть в очередь`},bulkEdit:{title:`Изменить {{count}} задание`,title_plural:`Изменить задания: {{count}}`,description:`К выбранным заданиям будут применены только изменённые параметры.`,printer:`Принтер`,noChange:`— Без изменений —`,queueOptions:`Параметры очереди`,staged:`Подготовлено (ручной запуск)`,autoPowerOff:`Отключить питание после печати`,requirePrevious:`Требовать успешного завершения предыдущего задания`,gcodeInjection:`Вставлять G-код`,printOptions:`Параметры печати`,bedLevelling:`Калибровка стола`,flowCalibration:`Калибровка потока`,vibrationCalibration:`Калибровка вибраций`,layerInspection:`Проверка первого слоя`,timelapse:`Таймлапс`,useAms:`Использовать AMS`,nozzleOffsetCali:`Калибровка смещения сопел`,applyChanges:`Применить изменения`,selectAll:`Выбрать все`,deselectAll:`Снять выделение`,selected:`Выбрано: {{count}}`,editSelected:`Изменить выбранные`,cancelSelected:`Отменить выбранные`},confirm:{cancelTitle:`Отменить запланированную печать`,cancelMessage:`Отменить задание «{{name}}»?`,stopTitle:`Остановить печать`,stopMessage:`Остановить текущую печать «{{name}}»? Задание на принтере будет отменено.`,removeTitle:`Удалить из истории`,removeMessage:`Удалить «{{name}}» из истории очереди?`,clearHistoryTitle:`Очистить историю`,clearHistoryMessage:`Удалить все записи из истории ({{count}})?`,cancelButton:`Отменить печать`,stopButton:`Остановить печать`,thisPrint:`эту печать`,thisItem:`это задание`},toast:{cancelled:`Задание отменено`,cancelFailed:`Не удалось отменить задание`,removed:`Задание удалено`,keptForOrder:`Отменено, а не удалено: только из этого запуска заказ может снова поставить эту пластину в очередь`,historyKeptForOrders:`Сохранено {{kept}}, они ещё нужны заказам.`,removeFailed:`Не удалось удалить задание`,stopped:`Печать остановлена`,stopFailed:`Не удалось остановить печать`,released:`Задание передано в очередь`,startFailed:`Не удалось запустить печать`,reorderFailed:`Не удалось изменить порядок очереди`,historyCleared:`Удалено записей истории: {{count}}`,clearHistoryFailed:`Не удалось очистить историю`,updateFailed:`Не удалось обновить задания`,bulkCancelled:`Отменено заданий: {{count}}`,bulkCancelFailed:`Не удалось отменить задания`,batchCreated:`Партия «{{name}}» создана`,batchCreateFailed:`Не удалось создать партию`,batchUngrouped:`Разгруппировано заданий: {{count}}`,batchUngroupFailed:`Не удалось разгруппировать партию`,resumedAfterFailure:`Очередь возобновлена — восстановлено заданий: {{restored}}`,resumeAfterFailureFailed:`Не удалось возобновить очередь`},resumeAfterFailure:{banner:`Очередь принтера {{printer}} заблокирована из-за ошибки предыдущей печати — пропущено заданий: {{count}}`,bannerHint:`Устраните проблему с принтером, затем возобновите очередь, чтобы вернуть пропущенные задания и снять блокировку.`,button:`Возобновить после ошибки`,confirmTitle:`Возобновить очередь после ошибки?`,confirmMessage:`Вернуть пропущенные задания ({{count}}) для принтера {{printer}} в состояние ожидания и снять блокировку. Перед продолжением убедитесь, что принтер готов.`},timeline:{listView:`Список`,timelineView:`Временная шкала`,unassigned:`Не назначено`,noData:`На этот день печать не запланирована`,nothingCommitted:`В этом интервале нет заданий с фиксированным временем. Подготовленные и ожидающие задания, а также задания «как можно скорее» на свободных принтерах не показываются — задайте время запуска или выпустите подготовленное задание в очередь.`,allDoneBy:`Расчётное завершение всех заданий: {{time}}`,staged:`Подготовлено`,filterAll:`Показать все`,filterPrinting:`Печатается`,filterQueued:`В очереди`,time:{anyMoment:`в любой момент`,minutesLeft:`осталось {{minutes}} мин`,hoursLeft:`осталось {{hours}} ч`,hoursMinutesLeft:`осталось {{hours}} ч {{minutes}} мин`},day:{previous:`Предыдущий день`,next:`Следующий день`,today:`Сегодня`},window:{back12h:`Назад на 12 часов`,forward12h:`Вперёд на 12 часов`,now:`Сейчас`},printerColumnHeader:`Принтер`},permissions:{noStopPrint:`У вас нет разрешения останавливать печать`,noStartPrint:`У вас нет разрешения запускать печать`,noEdit:`У вас нет разрешения изменять это задание`,noCancel:`У вас нет разрешения отменять это задание`,noRequeue:`У вас нет разрешения возвращать задания в очередь`,noRemove:`У вас нет разрешения удалять это задание`,noClearHistory:`У вас нет разрешения очищать историю`,noEditItems:`У вас нет разрешения изменять задания очереди`,noCancelItems:`У вас нет разрешения отменять задания очереди`}},stats:{title:`Статистика`,subtitle:`Перетаскивайте виджеты для изменения порядка. Нажмите значок глаза, чтобы скрыть виджет.`,overview:`Обзор`,totalPrints:`Всего печатей`,successRate:`Успешность`,totalPrintTime:`Общее время печати`,printTime:`Время печати`,totalFilament:`Всего использовано филамента`,filamentUsed:`Использовано филамента`,filamentCost:`Стоимость филамента`,totalCost:`Общая стоимость`,energyUsed:`Потреблено энергии`,energyCost:`Стоимость энергии`,energyWarmingUpTooltip:`Учёт энергии ещё накапливает почасовые снимки. Итоги за выбранный период станут точными, когда появится хотя бы один снимок до начала этого периода. Первые значения могут быть занижены.`,averagePrintTime:`Среднее время печати`,printsPerDay:`Печатей в день`,byPrinter:`По принтерам`,printsByPrinter:`Печати по принтерам`,byMaterial:`По материалам`,byMonth:`По месяцам`,last7Days:`Последние 7 дней`,last30Days:`Последние 30 дней`,last90Days:`Последние 90 дней`,allTime:`За всё время`,quickStats:`Краткая статистика`,printActivity:`Активность печати`,filamentTypes:`Типы филамента`,filamentTrends:`Расход филамента`,failureAnalysis:`Анализ неудач`,timeAccuracy:`Точность оценки времени`,successful:`Успешно:`,failed:`Неудачно:`,cancelled:`Отменено:`,perfectEstimate:`100% — точное совпадение с оценкой`,noTimeAccuracyData:`Данных о точности оценки времени пока нет`,noFilamentData:`Нет данных о филаменте`,noPrinterData:`Нет данных о принтерах`,noPrintData:`Нет данных о печати`,noPrintDataLast30Days:`За последние 30 дней данных о печати нет`,failureReasons:`Причины неудач`,topFailureReasons:`Основные причины неудач`,failedPrintsCount:`Неудачных печатей: {{failed}} из {{total}}`,lastWeekRate:`За прошлую неделю: {{rate}}%`,resetLayout:`Сбросить расположение`,recalculateCosts:`Пересчитать стоимость`,recalculateCostsHint:`Пересчитать стоимость всех архивных заданий по текущим ценам филамента`,exportStats:`Экспорт статистики`,exportAsCsv:`Экспорт в CSV`,exportAsExcel:`Экспорт в Excel`,hiddenCount:`Скрыто: {{count}}`,exportDownloaded:`Файл экспорта скачан`,exportFailed:`Не удалось экспортировать данные`,layoutReset:`Расположение сброшено`,recalculatedCosts:`Пересчитана стоимость архивов: {{count}}`,recalculateFailed:`Не удалось пересчитать стоимость`,loadingStats:`Загрузка статистики...`,noPermissionResetLayout:`У вас нет разрешения сбрасывать расположение`,noPermissionRecalculate:`У вас нет разрешения пересчитывать стоимость`,noPrintDataInRange:`В выбранном периоде нет данных о печати`,periodFilament:`Филамент за период`,periodCost:`Стоимость за период`,avgPerPrint:`В среднем на печать`,usageOverTime:`Расход по времени`,energyOverTime:`Энергия по времени`,filamentByWeight:`По весу`,printDuration:`Продолжительность печати`,printerUtilization:`Загрузка принтеров`,filamentSuccess:`Успешность по материалам`,printHabits:`Характер печати`,printTimeOfDay:`Время суток`,colorDistribution:`Распределение по цветам`,noColorData:`Нет данных о цветах`,records:`Рекорды`,longestPrint:`Самая долгая печать`,heaviestPrint:`Самая тяжёлая печать`,mostExpensivePrint:`Самая дорогая печать`,busiestDay:`Самый загруженный день`,successStreak:`Серия успешных печатей`,streakPrint:`успешная печать подряд`,streakPrints:`{{count}} успешных печатей подряд`,printerStats:`Статистика принтеров`,hours:`часов`,avgPrints:`В среднем печатей`,noArchiveData:`Нет данных о печати`,filamentByTime:`По времени`,avgWeight:`Средний вес`,avgTime:`Среднее время`,filamentByPrints:`По количеству печатей`,timeframe:{today:`Сегодня`,"this-week":`Эта неделя`,"this-month":`Этот месяц`,"last-7":`Последние 7 дней`,"last-30":`Последние 30 дней`,"last-90":`Последние 90 дней`,"this-year":`Этот год`,"all-time":`За всё время`,custom:`Произвольный период`,from:`С`,to:`По`},allUsers:`Все пользователи`,noUser:`Без пользователя (система)`,filterByUser:`Фильтр по пользователю`},maintenance:{title:`Обслуживание`,overview:`Обзор`,allOk:`Всё обслуживание выполнено вовремя`,dueCount:`Требуется выполнить: {{count}}`,dueCount_plural:`Требуется выполнить: {{count}}`,warningCount:`Предупреждений: {{count}}`,warningCount_plural:`Предупреждений: {{count}}`,totalPrintTime:`Общее время печати`,nextMaintenance:`Следующее обслуживание`,nothingDue:`Пока ничего не требуется`,tasks:`Задачи`,lastPerformed:`Последнее выполнение`,interval:`Интервал`,hoursRemaining:`Осталось {{hours}} ч`,hoursOverdue:`Просрочено на {{hours}} ч`,markDone:`Отметить выполненным`,performMaintenance:`Выполнить обслуживание`,history:`История`,noHistory:`История обслуживания пуста`,editPrintHours:`Изменить часы печати`,currentHours:`Текущие часы`,statusTab:`Состояние`,settingsTab:`Настройки`,overdueCount:`Просрочено: {{count}}`,dueSoonCount:`Скоро потребуется: {{count}}`,dueSoon:`Скоро потребуется`,allGood:`Всё в порядке`,overdueBy:`Просрочено на {{duration}}`,dueIn:`Через {{duration}}`,timeLeft:`Осталось {{duration}}`,day:`1 день`,days:`{{count}} дней`,week:`1 неделя`,weeks:`{{count}} недель`,month:`1 месяц`,months:`{{count}} месяцев`,year:`1 год`,maintenanceTypes:`Виды обслуживания`,maintenanceTypesDescription:`Системные и пользовательские задачи обслуживания`,addCustomType:`Добавить пользовательскую задачу`,restoreDefaults:`Восстановить стандартные задачи`,intervalType:`Тип интервала`,intervalValue:`Интервал ({{type}})`,icon:`Значок`,documentationLink:`Ссылка на документацию (необязательно)`,assignToPrinters:`Назначить принтерам`,selectAtLeastOnePrinter:`Выберите хотя бы один принтер`,addType:`Добавить вид`,custom:`Пользовательский`,printHours:`Часы печати`,calendarDays:`Календарные дни`,exampleName:`Например: заменить HEPA-фильтр`,viewDocumentation:`Открыть документацию`,timeBasedInterval:`Интервал по времени`,intervalOverrides:`Переопределение интервалов`,intervalOverridesDescription:`Настройка отдельных интервалов для конкретных принтеров`,assignedToPrinters:`Назначено принтерам:`,noPrintersAssigned:`Не назначено ни одному принтеру`,addPrinterShort:`Добавить:`,printersAssignedClick:`Назначено принтерам: {{count}} — нажмите для управления`,removeFromPrinter:`Убрать с этого принтера`,types:{lubricateCarbonRods:`Смазать карбоновые валы`,lubricateRails:`Смазать линейные направляющие`,cleanNozzle:`Очистить сопло/хотэнд`,checkBelts:`Проверить натяжение ремней`,cleanBuildPlate:`Очистить печатную пластину`,checkExtruder:`Проверить шестерни экструдера`,checkCooling:`Проверить вентиляторы охлаждения`,generalInspection:`Общий осмотр`,cleanCarbonRods:`Очистить карбоновые валы`,lubricateSteelRods:`Смазать стальные валы`,cleanSteelRods:`Очистить стальные валы`,cleanLinearRails:`Очистить линейные направляющие`,checkPtfeTube:`Проверить PTFE-трубку`,replaceHepaFilter:`Заменить HEPA-фильтр`,replaceCarbonFilter:`Заменить угольный фильтр`,lubricateLeftNozzleRail:`Смазать направляющую левого сопла`},maintenanceComplete:`Обслуживание отмечено выполненным`,typeUpdated:`Вид обслуживания обновлён`,typeDeleted:`Вид обслуживания удалён`,defaultsRestored:`Восстановлено стандартных задач: {{count}}`,printHoursUpdated:`Часы печати обновлены`,printerAssigned:`Принтер назначен`,printerRemoved:`Принтер удалён из назначения`,deleteTypeConfirm:`Удалить «{{name}}»?`,deleteSystemTypeTitle:`Удалить стандартную задачу обслуживания?`,deleteSystemTypeMessage:`Удалить стандартную задачу обслуживания «{{name}}»?`,noPermissionUpdate:`У вас нет разрешения обновлять задачи обслуживания`,noPermissionPerform:`У вас нет разрешения отмечать обслуживание выполненным`,noPermissionEditTypes:`У вас нет разрешения изменять виды обслуживания`,noPermissionDeleteTypes:`У вас нет разрешения удалять виды обслуживания`,noPermissionEditHours:`У вас нет разрешения изменять часы печати`,noPermissionRemovePrinter:`У вас нет разрешения удалять назначения принтеров`,noPermissionAssignPrinter:`У вас нет разрешения назначать принтеры`,noPermissionEditIntervals:`У вас нет разрешения изменять интервалы`,configureSettings:`Настроить виды обслуживания и интервалы`},settings:{sliceEngine:`Движок нарезки`,sliceEngineSidecar:`Серверный sidecar`,sliceEngineSidecarHint:`Нарезка выполняется на сервере, в контейнере sidecar слайсера.`,sliceEngineBrowser:`В браузере`,sliceEngineBrowserHint:`Нарезка выполняется на этом устройстве, без участия сервера.`,title:`Настройки`,general:`Общие`,tabs:{general:`Общие`,smartPlugs:`Умные розетки`,sensors:`Датчики`,notifications:`Уведомления`,queue:`Рабочий процесс`,queueDispatch:`Очередь и отправка`,queuePipelines:`Конвейеры`,filament:`Филамент`,network:`Сеть`,apiKeys:`Ключи API`,virtualPrinter:`Виртуальный принтер`,spoolbuddy:`SpoolBuddy`,failureDetection:`Обнаружение сбоев`,users:`Аутентификация`,backup:`Резервное копирование`,emailAuth:`Аутентификация по email`,ldap:`LDAP`,twoFa:`Двухфакторная аутентификация`,oidc:`SSO / OIDC`,security:`Безопасность`},spoolbuddy:{infoTitle:`Устройства SpoolBuddy`,infoBody:`Киоски SpoolBuddy регистрируются автоматически по сигналам активности. Удалите регистрацию устройства, если оно больше не используется или после сбоя демона остался устаревший дубликат.`,duplicatesTitle:`Зарегистрировано устройств: {{count}}`,duplicatesBody:`Интерфейс киоска использует только первое зарегистрированное устройство. Если один из экземпляров — устаревший дубликат после сбоя, удалите его регистрацию: работающее устройство зарегистрируется снова при следующем сигнале активности.`,empty:`Устройства SpoolBuddy пока не зарегистрированы.`,online:`В сети`,offline:`Не в сети`,unregister:`Удалить регистрацию`,unregisterSuccess:`Регистрация устройства удалена`,unregisterError:`Не удалось удалить регистрацию устройства`,confirmTitle:`Удалить регистрацию устройства SpoolBuddy?`,confirmBody:`Устройство «{{hostname}}» ({{deviceId}}) будет удалено из базы данных. Если оно работает, то зарегистрируется снова при следующем сигнале активности.`,ipAddress:`IP-адрес`,firmware:`Прошивка`,lastSeen:`Последняя активность`,daemonUptime:`Время работы демона`,systemUptime:`Время работы системы`,never:`никогда`,nfc:`NFC`,scale:`Весы`,cpuTemp:`Температура ЦП`,cpuLoad:`Загрузка ЦП`,memory:`Память`,disk:`Диск`,update:`Обновить`,updateConfirmTitle:`Обновить демон SpoolBuddy?`,updateConfirmBody:`Запустить обновление ПО на «{{hostname}}»? После установки обновления демон будет перезапущен.`,restartBrowser:`Перезапустить браузер`,restartBrowserConfirmTitle:`Перезапустить браузер киоска?`,restartBrowserConfirmBody:`Перезапустить браузер киоска на «{{hostname}}»? Экран ненадолго погаснет.`,restartDaemon:`Перезапустить демон`,restartDaemonConfirmTitle:`Перезапустить демон SpoolBuddy?`,restartDaemonConfirmBody:`Перезапустить демон SpoolBuddy на «{{hostname}}»? Устройство на несколько секунд пропадёт из сети.`,reboot:`Перезагрузить`,rebootConfirmTitle:`Перезагрузить устройство?`,rebootConfirmBody:`Перезагрузить «{{hostname}}»? Устройство будет недоступно около минуты.`,shutdown:`Выключить`,shutdownConfirmTitle:`Выключить устройство?`,shutdownConfirmBody:`Выключить «{{hostname}}»? Для повторного включения потребуется физический доступ.`,commandConfirm:`Подтвердить`,commandQueued:`Команда поставлена в очередь`,commandError:`Не удалось отправить команду`},ldap:{title:`Аутентификация LDAP`,enabledDesc:`Аутентификация LDAP включена`,disabledDesc:`Аутентификация LDAP отключена`,disabledHint:`Настройте и сохраните параметры LDAP ниже, затем включите аутентификацию.`,enabled:`Аутентификация LDAP включена`,disabled:`Аутентификация LDAP отключена`,feature1:`Пользователи могут входить с учётными данными LDAP`,feature2:`Локальная учётная запись администратора остаётся резервным способом входа`,feature3:`При входе группы LDAP сопоставляются с группами Bambuddy`,serverConfig:`Настройка сервера LDAP`,serverUrl:`Адрес сервера`,serverUrlHint:`Используйте ldaps:// для SSL либо ldap:// с StartTLS`,security:`Безопасность`,securityHint:`StartTLS переводит обычное соединение на TLS. LDAPS использует TLS с самого начала.`,bindDn:`Bind DN (служебная учётная запись)`,bindPassword:`Пароль Bind`,searchBase:`Базовый DN поиска`,userFilter:`Фильтр поиска пользователей`,userFilterHint:`{username} заменяется именем пользователя при входе. Для OpenLDAP используйте (uid={username}).`,advanced:`Дополнительно`,autoProvision:`Автоматически создавать пользователей`,autoProvisionHint:`Автоматически создавать учётную запись Bambuddy при первом входе через LDAP`,defaultGroup:`Группа по умолчанию`,defaultGroupNone:`— Нет (без резервной группы) —`,defaultGroupHint:`Резервная группа для пользователя LDAP, который успешно вошёл, но не состоит ни в одной сопоставленной группе LDAP. Оставьте пустым, чтобы такие пользователи не получали разрешений.`,groupMapping:`Сопоставление групп (JSON)`,groupMappingHint:`Сопоставьте DN групп LDAP с группами Bambuddy. Доступные группы: `,testConnection:`Проверить подключение`,settingsSaved:`Настройки LDAP сохранены`,errors:{serverRequired:`Укажите адрес сервера LDAP`,searchBaseRequired:`Укажите базовый DN поиска`,enableAuthFirst:`Сначала включите аутентификацию`,configureLdapFirst:`Сначала сохраните настройки LDAP`}},email:{smtpSettings:`Настройка SMTP`,smtpHost:`SMTP-сервер`,smtpPort:`Порт SMTP`,security:`Безопасность`,authentication:`Аутентификация`,username:`Имя пользователя`,password:`Пароль`,fromEmail:`Адрес отправителя`,fromName:`Имя отправителя`,testConnection:`Проверить подключение SMTP`,testRecipient:`Адрес получателя тестового письма`,sendTest:`Отправить тестовое письмо`,sending:`Отправка...`,save:`Сохранить настройки`,saving:`Сохранение...`,advancedAuth:`Расширенная аутентификация`,advancedAuthEnabled:`Расширенная аутентификация включена`,advancedAuthEnabledDesc:`Функции управления пользователями через email активны. Новые пользователи получают автоматически созданные пароли по почте и могут сбрасывать пароль через функцию восстановления.`,advancedAuthDisabled:`Расширенная аутентификация отключена`,advancedAuthDisabledDesc:`Включите расширенную аутентификацию, чтобы использовать почтовые функции управления пользователями.`,enable:`Включить`,disable:`Отключить`,feature1:`Пароли для новых пользователей создаются автоматически и отправляются по email`,feature2:`Пользователи могут входить по имени или адресу электронной почты`,feature3:`Доступно восстановление забытого пароля`,feature4:`Администраторы могут сбрасывать пароли пользователей по email`,errors:{requiredFields:`Заполните все обязательные поля`,usernameRequired:`При включённой аутентификации требуется имя пользователя`,enterTestEmail:`Введите адрес для тестового письма`,smtpServerAndEmail:`Перед проверкой укажите SMTP-сервер и адрес отправителя`,usernamePasswordRequired:`При включённой аутентификации требуются имя пользователя и пароль`,configureSmtpFirst:`Сначала настройте и проверьте SMTP`,enableAuthFirst:`Чтобы использовать почтовые функции, сначала включите аутентификацию.`},success:{settingsSaved:`Настройки SMTP сохранены`},securityOptions:{starttls:`STARTTLS (порт 587)`,ssl:`SSL/TLS (порт 465)`,none:`Без шифрования (порт 25)`},authOptions:{enabled:`Включена`,disabled:`Отключена`}},appearance:`Внешний вид`,notifications:`Уведомления`,smartPlugs:`Умные розетки`,spoolman:`Spoolman`,updates:`Обновления`,language:`Язык`,languageDescription:`Выберите предпочитаемый язык`,theme:`Тема`,themeLight:`Светлая`,themeDark:`Тёмная`,themeSystem:`Системная`,defaultView:`Страница по умолчанию`,defaultViewDescription:`Страница, которая открывается при запуске приложения`,checkForUpdates:`Проверить обновления`,autoUpdate:`Автоматическое обновление`,currentVersion:`Текущая версия`,latestVersion:`Последняя версия`,upToDate:`Установлена последняя версия`,updateAvailable:`Доступно обновление`,notificationLanguage:`Язык уведомлений`,notificationLanguageDescription:`Язык push-уведомлений`,bedCooledThreshold:`Порог остывания стола`,bedCooledThresholdDescription:`Температура, ниже которой стол после печати считается остывшим`,userNotificationsEnabled:`Пользовательские уведомления`,userNotificationsEnabledDescription:`Включить меню пользовательских и почтовых уведомлений о событиях печати. Требуется расширенная аутентификация.`,userNotificationsDisabledHint:`Для пользовательских уведомлений включите расширенную аутентификацию.`,notificationProviders:`Провайдеры уведомлений`,addProvider:`Добавить провайдера`,editProvider:`Изменить провайдера`,providerType:`Тип провайдера`,testNotification:`Проверить уведомление`,testSuccess:`Тестовое уведомление успешно отправлено`,testFailed:`Не удалось отправить тестовое уведомление`,quietHours:`Тихие часы`,quietHoursDescription:`Не беспокоить в указанный период`,quietHoursStart:`Начало`,quietHoursEnd:`Окончание`,events:{title:`События уведомлений`,printStart:`Печать началась`,printComplete:`Печать завершена`,printFailed:`Ошибка печати`,printStopped:`Печать остановлена`,printProgress:`Этапы выполнения`,printProgressDescription:`Уведомлять при 25%, 50% и 75%`,printerOffline:`Принтер не в сети`,printerError:`Ошибка принтера`,filamentLow:`Филамент заканчивается`,maintenanceDue:`Требуется обслуживание`,maintenanceDueDescription:`Уведомлять, когда наступил срок обслуживания`},smartPlug:{title:`Умные розетки`,add:`Добавить умную розетку`,edit:`Изменить умную розетку`,name:`Название`,ipAddress:`IP-адрес`,linkedPrinter:`Связанный принтер`,autoOn:`Автоматическое включение`,autoOnDescription:`Включать при начале печати`,autoOff:`Автоматическое выключение`,autoOffDescription:`Выключать после завершения печати`,offDelay:`Задержка выключения`,offDelayMinutes:`Минут после печати`,offDelayTemp:`Когда сопло остынет ниже заданной температуры`,currentState:`Текущее состояние`,turnOn:`Включить`,turnOff:`Выключить`},filamentTracking:`Учёт филамента`,filamentTrackingDesc:`Выберите способ учёта катушек: встроенный инвентарь или внешний сервер Spoolman.`,autoAddUnknownRfid:`Автоматически добавлять неизвестные RFID-катушки`,autoAddUnknownRfidDesc:`Автоматически создавать запись в инвентаре при обнаружении катушки с неизвестной RFID-меткой. Отключите, если регистрируете новые катушки заранее, чтобы избежать дубликатов.`,filamentChecks:`Проверки филамента`,disableFilamentWarnings:`Отключить предупреждения о филаменте`,disableFilamentWarningsDesc:`Не показывать предупреждения о нехватке филамента при запуске печати или добавлении в очередь`,preferLowestFilament:`Предпочитать катушку с наименьшим остатком`,preferLowestFilamentDesc:`Если подходят несколько катушек, использовать катушку с наименьшим остатком филамента`,preferLowestFilamentBackupNote:`Работает только при включённом AMS Filament Backup: иначе принтер не сможет переключиться на вторую катушку после окончания выбранной.`,trackingModeBuiltIn:`Встроенный инвентарь`,trackingModeBuiltInDesc:`Автоматическое сопоставление RFID и учёт расхода`,trackingModeSpoolmanDesc:`Внешний сервер управления филаментом`,builtInFeatureRfid:`Автоматически определяет официальные RFID-катушки Bambu Lab в AMS`,builtInFeatureUsage:`Учитывает расход филамента для каждой печати`,builtInFeatureCatalog:`Управление катушками, цветами и профилями K-фактора`,builtInFeatureThirdParty:`Сторонние катушки можно связать с катушками инвентаря`,amsSyncButton:`Синхронизировать вес из AMS`,amsSyncTitle:`Синхронизация веса катушек из AMS`,amsSyncMessage:`Вес всех катушек инвентаря будет заменён текущими значениями остатка из AMS подключённых принтеров. Используйте это для восстановления повреждённых данных о весе. Принтеры должны быть в сети.`,amsSyncing:`Синхронизация...`,amsSyncSuccess:`Синхронизировано катушек: {{synced}}, пропущено: {{skipped}}`,amsSyncError:`Не удалось синхронизировать вес из AMS`,spoolmanAmsSyncButton:`Синхронизировать вес Spoolman из AMS`,spoolmanAmsSyncTitle:`Синхронизация веса катушек Spoolman из AMS`,spoolmanAmsSyncMessage:`Вес всех катушек Spoolman будет обновлён по текущим значениям остатка из AMS подключённых принтеров. Принтеры должны быть в сети.`,spoolmanAmsSyncing:`Синхронизация...`,spoolmanAmsSyncSuccess:`Синхронизировано катушек: {{synced}}, пропущено: {{skipped}}`,spoolmanAmsSyncError:`Не удалось синхронизировать вес Spoolman из AMS`,spoolmanAmsSyncErrorUnreachable:`Не удалось синхронизировать вес Spoolman: сервер недоступен`,spoolmanAmsSyncErrorNotConfigured:`Не удалось синхронизировать вес Spoolman: сервер не настроен`,spoolmanNotConfigured:`Spoolman не настроен`,spoolmanFilamentCatalogTitle:`Каталог филамента Spoolman`,spoolmanFilamentCatalogDesc:`Названия филаментов и масса пустых катушек из Spoolman. Здесь можно изменить название и массу катушки; остальные свойства редактируются непосредственно в Spoolman.`,spoolmanUrl:`Адрес Spoolman`,spoolmanUrlHint:`Адрес сервера Spoolman, например http://localhost:7912`,spoolmanConnected:`Подключён`,spoolmanDisconnected:`Отключён`,status:`Состояние`,connect:`Подключить`,disconnect:`Отключить`,howSyncWorks:`Как работает синхронизация`,syncInfoRfidOnly:`Синхронизируются только официальные RFID-катушки Bambu Lab`,syncInfoAutoCreate:`Новые катушки автоматически создаются в Spoolman при первой синхронизации`,syncInfoThirdPartySkipped:`Неофициальные катушки Bambu Lab, сторонние и перезаправленные катушки пропускаются`,linkingExistingSpools:`Привязка существующих катушек`,linkingExistingSpoolsDesc:`Чтобы привязать существующую катушку Spoolman к AMS, наведите указатель на слот AMS и нажмите «Привязать к Spoolman».`,syncMode:`Режим синхронизации`,syncModeAuto:`Автоматически`,syncModeManual:`Только вручную`,syncModeAutoDesc:`Данные AMS синхронизируются автоматически при обнаружении изменений`,syncModeManualDesc:`Синхронизация выполняется только вручную`,syncAmsData:`Синхронизировать данные AMS`,syncAmsDataDesc:`Вручную синхронизировать данные AMS принтера со Spoolman`,allPrinters:`Все принтеры`,noDefaultPrinter:`Без принтера по умолчанию (спрашивать каждый раз)`,sidebarOrder:`Порядок пунктов боковой панели`,saveThumbnails:`Сохранять миниатюры`,captureFinishPhoto:`Снимок после завершения`,noPrintersConfigured:`Принтеры не настроены`,archiveMode:{always:`Всегда создавать запись в архиве`,never:`Не создавать запись в архиве`,ask:`Спрашивать каждый раз`},checkForUpdatesLabel:`Проверять обновления`,checkPrinterFirmware:`Проверять прошивку принтера`,includeBetaUpdates:`Включать бета-версии`,includeBetaUpdatesDesc:`Уведомлять о бета- и предварительных версиях при проверке обновлений`,localLogin:{disable:`Отключить локальный вход по имени пользователя и паролю`,disableHint:`Если включено, вход возможен только через провайдеров SSO. На LDAP это не влияет. Чтобы сохранить аварийный способ входа, задайте на сервере BAMBUDDY_LOCAL_LOGIN=true.`},enableRetry:`Включить повторные попытки`,homeAssistantDescription:`Управление умными розетками через Home Assistant`,environmentManagedLabel:`(управляется окружением)`,autoEnabledViaEnv:`Автоматически включено переменными окружения`,urlFromEnvReadOnly:`Значение задано переменной окружения HA_URL (только чтение)`,tokenFromEnvReadOnly:`Значение задано переменной окружения HA_TOKEN (только чтение)`,mqttConnectedTo:`Подключено к`,prometheusDescription:`Экспортировать данные принтеров в формате Prometheus`,noSmartPlugsTitle:`Умные розетки не настроены`,noSmartPlugsDescription:`Добавьте умную розетку на базе Tasmota для учёта энергии и автоматизации питания.`,noProvidersTitle:`Провайдеры не настроены`,noProvidersDescription:`Добавьте провайдера для получения уведомлений.`,noTemplatesAvailable:`Шаблоны отсутствуют. Перезапустите бэкенд, чтобы создать стандартные шаблоны.`,apiPermissionView:`Просмотр состояния принтеров и очереди`,apiPermissionEdit:`Добавление и удаление заданий из очереди печати`,apiKeysEmptyTitle:`Ключей API нет`,apiKeysEmptyDescription:`Создайте ключ API для интеграции с внешними сервисами.`,noUsersFound:`Пользователи не найдены`,noGroupsFound:`Группы не найдены`,noGroupsAvailable:`Доступных групп нет`,passwordsDoNotMatch:`Пароли не совпадают`,systemGroupWarning:`Названия системных групп изменить нельзя`,authDisabledTitle:`Аутентификация отключена`,authDisabledFeature1:`Требовать вход для доступа к системе`,authDisabledFeature2:`Создавать нескольких пользователей с групповыми разрешениями`,authDisabledFeature3:`Управлять доступом с помощью более чем 50 отдельных разрешений`,userHasCreated:`Этот пользователь создал:`,userItemsQuestion:`Что сделать с этими объектами?`,deleteUserConfirm:`Удалить этого пользователя?`,actionCannotBeUndone:`Это действие нельзя отменить.`,addFirstSmartPlug:`Добавить первую умную розетку`,providers:`Провайдеры`,log:`Журнал`,testAll:`Проверить все`,testResults:`Результаты проверки`,testPassedCount:`Успешно: {{count}}`,testFailedCount:`Ошибок: {{count}}`,messageTemplates:`Шаблоны сообщений`,messageTemplatesDescription:`Настройте тексты уведомлений для каждого события.`,apiKeys:`Ключи API`,apiKeysDescription:`Создавайте ключи API для внешних интеграций и вебхуков.`,createKey:`Создать ключ`,apiKeyCreated:`Ключ API успешно создан`,apiKeyCopyWarning:`Скопируйте ключ сейчас — повторно он показан не будет!`,useInApiBrowser:`Использовать в обозревателе API`,apiKeyQrButton:`QR-код`,apiKeyQrTitle:`Сканирование для настройки`,apiKeyQrCaption:`Отсканируйте мобильным приложением, чтобы добавить этот сервер и ключ API.`,apiKeyQrWarning:`QR-код содержит секретный ключ API — не передавайте его и не публикуйте снимок экрана.`,createNewApiKey:`Создать ключ API`,keyName:`Название ключа`,keyNamePlaceholder:`например, Home Assistant или OctoPrint`,readStatus:`Чтение состояния`,readStatusDescription:`Просмотр состояния принтеров, очереди, библиотеки, архива и конвейеров слайсера`,manageQueue:`Управление очередью`,manageQueueDescription:`Добавление и удаление заданий из очереди печати. Вместе с «Управление библиотекой» — запуск конвейеров слайсера`,controlPrinter:`Управление принтером`,controlPrinterDescription:`Пауза, продолжение и остановка печати`,manageLibrary:`Управление библиотекой`,manageLibraryDescription:`Загрузка, переименование, удаление и слайсинг файлов библиотеки; импорт моделей из MakerWorld. Вместе с «Управление очередью» — запуск конвейеров слайсера`,manageInventory:`Управление запасами`,manageInventoryDescription:`Создание, изменение и удаление катушек и записей учёта. Требуется для киосков SpoolBuddy: сканирование NFC, показания весов и системные команды киоска.`,manageMaintenance:`Управление обслуживанием`,manageMaintenanceDescription:`Регистрация выполненного обслуживания, сброс счётчиков, изменение интервалов и управление каталогом видов обслуживания. Подходит для автоматизаций Home Assistant, которые отмечают, например, «сопло очищено», без предоставления более широких прав управления принтером.`,manageArchives:`Управление архивом`,manageArchivesDescription:`Изменение и удаление записей архива печати, включая старые задания и их вклад в статистику. Подходит для автоматизаций очистки истории печати.`,manageProjects:`Управление проектами`,manageProjectsDescription:`Создание, изменение и удаление проектов, а также добавление в них архивных заданий. Подходит для автоматизаций, распределяющих печати по проектам.`,libraryBadge:`Библиотека`,inventoryBadge:`Запасы`,maintenanceBadge:`Обслуживание`,archivesBadge:`Архив`,projectsBadge:`Проекты`,cloudAccess:`Разрешить доступ к облаку`,cloudAccessDescription:`Чтение пресетов и филаментов Bambu Cloud от вашего имени. Требуется вход в Bambu Cloud.`,cloudBadge:`Облако`,updateEnergyCost:`Обновление тарифа на электроэнергию`,updateEnergyCostDescription:`Разрешить этому ключу отправлять новую цену за кВт⋅ч методом POST в /settings/electricity-price. Полезно для автоматизаций динамического тарифа Home Assistant (Tibber, Octopus и т. п.). Это единственный параметр настроек, доступный для записи через ключ API.`,energyCostBadge:`Энергия`,legacyKey:`Устаревший`,legacyKeyTooltip:`Создан до появления привязки к пользователям; пересоздайте для доступа к облаку`,unnamedKey:`Ключ без названия`,lastUsed:`Последнее использование`,read:`Чтение`,control:`Управление`,createFirstKey:`Создать первый ключ`,webhookEndpoints:`Конечные точки вебхуков`,webhookApiKeyHint:`Передавайте ключ API в заголовке X-API-Key.`,webhook:{getAllStatus:`Получить состояние всех принтеров`,getSpecificStatus:`Получить состояние выбранного принтера`,addToQueue:`Добавить в очередь печати`,pausePrint:`Приостановить печать`,resumePrint:`Продолжить печать`,stopPrint:`Остановить печать`},apiBrowser:`Обозреватель API`,apiBrowserDescription:`Просмотр и проверка всех доступных конечных точек API.`,apiKeyForTesting:`Ключ API для проверки`,apiKeyPlaceholder:`Вставьте ключ API для проверки защищённых конечных точек…`,apiKeyHint:`Ключ будет передан в запросе в заголовке X-API-Key.`,deleteApiKeyTitle:`Удаление ключа API`,deleteApiKeyMessage:`Удалить этот ключ API? Все использующие его интеграции перестанут работать.`,deleteKey:`Удалить ключ`,amsDisplayThresholds:`Пороговые значения AMS`,amsThresholdsDescription:`Настройте цветовые пороги индикаторов влажности и температуры AMS.`,humidity:`Влажность`,goodGreen:`Норма (зелёный)`,fairOrange:`Допустимо (оранжевый)`,aboveFairBad:`Выше допустимого порога отображается красным`,fairAlsoDryingThreshold:`Этот порог также запускает автоматическую сушку, если она включена`,fairBelowDryingFloor:`Автоматическая сушка не может достичь этого значения: при работающем нагревателе AMS показывает {{floor}} % и выше, поэтому каждый цикл завершался бы и тут же запускался снова. Установите значение выше {{floor}} %, если используете автоматическую сушку.`,temperature:`Температура`,goodBlue:`Норма (синий)`,aboveFairHot:`Выше допустимого порога отображается красным как перегрев`,tempAlarmThreshold:`Тревога выше`,tempAlarmSeparateFromBand:`Уведомления отправляет только порог тревоги — «хорошо» и «допустимо» лишь окрашивают индикатор. Оставьте поле пустым, чтобы срабатывать по допустимому порогу, как раньше.`,tempAlarmMustBePositive:`Порог 0 или меньше игнорируется — тревога срабатывает по допустимому порогу.`,historyRetention:`Хранение истории`,keepSensorHistory:`Хранить историю датчиков`,historyRetentionDescription:`Более старые данные влажности и температуры будут удаляться автоматически`,defaultPrintOptions:`Параметры печати по умолчанию`,defaultPrintOptionsDescription:`Задайте значения по умолчанию для новых заданий. Их можно изменить отдельно в диалоге запуска печати.`,defaultBedLevelling:`Калибровка стола`,defaultBedLevellingDesc:`Автоматически выровнять стол перед печатью`,defaultFlowCali:`Калибровка потока`,defaultFlowCaliDesc:`Калибровать поток экструзии`,defaultVibrationCali:`Калибровка вибраций`,defaultVibrationCaliDesc:`Уменьшить артефакты звона`,defaultLayerInspect:`Проверка первого слоя`,defaultLayerInspectDesc:`Проверка первого слоя системой компьютерного зрения`,defaultTimelapse:`Таймлапс`,defaultTimelapseDesc:`Записывать таймлапс`,defaultNozzleOffsetCali:`Калибровка смещения сопел`,defaultNozzleOffsetCaliDesc:`Калибровать взаимное смещение сопел экструдеров`,tempFanPresetsTitle:`Пресеты температуры и вентиляторов`,tempFanPresetsDescription:`Настройте значения быстрого выбора в меню температуры и скорости вентиляторов карточки принтера. Кнопка «Выкл.» отображается всегда.`,tempFanPresetsNozzle:`Температура сопла`,tempFanPresetsBed:`Температура стола`,tempFanPresetsChamber:`Температура камеры`,tempFanPresetsFan:`Скорость вентилятора`,tempFanPresetsReset:`Восстановить значения по умолчанию`,concurrentUploadsTitle:`Одновременные загрузки`,concurrentUploadsDescription:`Количество принтеров, на которые очередь может одновременно отправлять файлы. Передача файлов на принтеры выполняется медленно: крупная модель может загружаться несколько минут, а каждый принтер ждёт своей очереди. В большом парке увеличение этого значения сокращает ожидание последних принтеров в группе. Уменьшите его, если сеть или сервер Bambuddy плохо справляются с параллельной передачей.`,concurrentUploadsLabel:`Одновременно загружать на принтеры`,concurrentUploadsHelp:`Значение 1 отправляет файл только на один принтер за раз, как в прежнем режиме. По умолчанию: 4.`,staggeredStart:`Поэтапный запуск`,staggeredStartDescription:`Размер группы и интервал по умолчанию при поэтапном запуске партии на нескольких принтерах. Для каждой партии значения можно изменить в окне запуска печати.`,preheatTitle:`Преднагрев и выдержка`,preheatDescription:`Нагреть стол и, если поддерживается, камеру, затем выдержать температуру перед запуском каждого задания очереди. Полезно для инженерных пластиков (PA, ABS) на принтерах без активного нагревателя камеры: во время выдержки стол прогревает камеру излучением. Целевая температура стола берётся из файла печати; поведение камеры зависит от модели принтера.`,preheatEnabled:`Включить преднагрев и выдержку`,preheatEnabledDesc:`Если выключено, задания очереди отправляются сразу. Для каждого задания можно задать отдельное значение.`,preheatFilamentTargetsLabel:`Целевая температура камеры по типу филамента (°C)`,preheatFilamentTargetsHint:`Bambuddy выбирает наибольшее значение среди задействованных слотов AMS. Печать, для всех слотов которой получается 0 — PLA, PETG, TPU, PVA, — полностью пропускает прогрев и начинается сразу.`,preheatFilamentTargetsReset:`Восстановить значения по умолчанию`,preheatFilamentTargetsDefaultRow:`Прочее / без сопоставления`,preheatMaxWait:`Максимальное ожидание (с)`,preheatMaxWaitHelp:`Предельное время прогрева камеры, после которого процесс продолжится.`,preheatSoak:`Выдержка (с)`,preheatSoakHelp:`Время выдержки после достижения цели или истечения максимального ожидания.`,preheatHardwareTitle:`Поведение по моделям принтеров:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E активно нагревают камеру командой M141. X1C/P2S измеряют температуру камеры, но прогревают её только теплом стола. У P1S/P1P/A1/A1 Mini нет датчика камеры — применяется только таймер выдержки.`,preheatPerItemDesc:`Нагревать стол и камеру перед запуском этого задания. По умолчанию используется общий переключатель «Настройки → Рабочий процесс».`,preheatOverride_inherit:`Наследовать`,preheatOverride_on:`Включено`,preheatOverride_off:`Выключено`,calibrationMode_off:`Выключено`,calibrationMode_on:`Включено`,calibrationMode_auto:`Авто`,preheatTargetOverride:`Переопределение температуры камеры (°C; пусто — значение для филамента)`,preheatTargetOverrideHelp:`0 нагревает стол и выполняет выдержку без камеры. Если поле пустое, печать, которой камера не нужна, полностью пропускает прогрев.`,plateClear:`Подтверждение очистки пластины`,requirePlateClear:`Требовать подтверждение очистки пластины`,requirePlateClearDescription:`Если включено, планировщик не запускает следующее задание на принтере с завершённой печатью, пока не подтверждена очистка пластины. Отключение также скрывает индикатор состояния пластины и кнопку «Пластина очищена» на карточках принтеров.`,keepBedWarm:`Держать стол тёплым между печатями`,keepBedWarmDesc:`Пока ожидается подтверждение очистки пластины, стол поддерживается при указанной ниже температуре подогрева, чтобы камера оставалась тёплой, — или при температуре стола следующей печати, если она выше. Применяется только если следующая печать требует нагрева камеры (ASA, ABS, PA, PC и др.). Требуется включённое подтверждение очистки пластины.`,keepWarmBedTemp:`Температура стола при поддержании тепла (°C)`,keepWarmBedTempHelp:`Используется, когда стол служит для нагрева камеры: при поддержании тепла и при предварительном нагреве, если в файле печати нет температуры стола. Более высокая температура из файла всегда имеет приоритет.`,keepWarmMaxMinutes:`Прекратить подогрев через (минут)`,keepWarmMaxMinutesHelp:`Если пластина не освобождена за это время, нагреватели выключаются, а не остаются включёнными бесконечно.`,gcodeInjection:`Вставка G-кода`,gcodeInjectionDescription:`Настройте G-код, добавляемый в начало и/или конец печати для систем автоматического запуска, таких как Farmloop, SwapMod, AutoClear и Printflow 3D. Фрагменты задаются отдельно для каждой модели принтера и применяются, когда для задания очереди включена вставка G-кода.`,gcodeInjectionNoPrinters:`Принтеры не найдены. Добавьте принтеры, чтобы настроить фрагменты G-кода.`,gcodeStartLabel:`Начальный G-код`,gcodeEndLabel:`Завершающий G-код`,gcodeStartPlaceholder:`G-код, добавляемый перед началом печати…`,gcodeEndPlaceholder:`G-код, добавляемый после завершения печати…`,staggerGroupSize:`Размер группы`,staggerGroupSizeHelp:`Количество принтеров, запускаемых одновременно`,staggerInterval:`Интервал (мин)`,staggerIntervalHelp:`Задержка между запуском групп`,queueDrying:`Автоматическая сушка в очереди`,queueDryingDescription:`Автоматически сушить филамент в AMS, когда принтер простаивает между заданиями очереди. Запуск определяется указанным выше порогом влажности.`,queueDryingEnabled:`Включить автоматическую сушку`,queueDryingEnabledDescription:`Автоматически запускать сушку AMS, когда принтер простаивает и влажность выше порога`,queueDryingBlock:`Ожидать завершения сушки`,queueDryingBlockDescription:`Блокировать очередь печати до завершения сушки. Если выключено, печать имеет приоритет.`,ambientDryingEnabled:`Фоновая сушка`,ambientDryingEnabledDescription:`Автоматически сушить филамент на простаивающих принтерах при превышении порога влажности, даже если очередь пуста.`,printDryingEnabled:`Продолжать сушку во время печати`,printDryingEnabledDescription:`Разрешить автоматической сушке продолжаться во время печати на поддерживаемом оборудовании (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L с актуальной прошивкой). Для защиты катушек температура автоматически ограничивается на 5 °C ниже пресета сушки в простое.`,dryingPresets:`Пресеты сушки`,dryingPresetsDescription:`Температура и длительность для каждого типа филамента. AMS 2 Pro использует более низкие температуры, AMS-HT поддерживает более высокие.`,dryingFilament:`Филамент`,humidityThresholds:`Пороги влажности`,humidityThresholdsDescription:`Порог запуска автоматической сушки и предупреждений для каждого типа филамента. При смешанной загрузке AMS используется наименьший порог.`,humidityThresholdCol:`Порог`,humidityThresholdDefault:`По умолчанию (неизвестные типы)`,printModal:`Окно запуска печати`,expandCustomMapping:`Разворачивать пользовательское сопоставление`,expandCustomMappingDescription:`При печати на нескольких принтерах сразу показывать развёрнутое сопоставление AMS для каждого принтера`,authentication:`Аутентификация`,authEnabledDescription:`Доступ к экземпляру защищён аутентификацией пользователей`,authDisabledDescription:`Включите, чтобы требовать вход и управлять доступом пользователей`,authDisabledMessage:`Включите аутентификацию, чтобы создавать учётные записи, управлять правами и защитить экземпляр Bambuddy.`,enableAuthentication:`Включить аутентификацию`,currentUser:`Текущий пользователь`,changePassword:`Изменить пароль`,admin:`Администратор`,users:`Пользователи`,addUser:`Добавить пользователя`,groups:`Группы`,addGroup:`Добавить группу`,system:`Система`,noDescription:`Нет описания`,userCount:`Пользователей: {{count}}`,permissionCount:`Разрешений: {{count}}`,createUser:`Создать пользователя`,username:`Имя пользователя`,enterUsername:`Введите имя пользователя`,password:`Пароль`,enterPassword:`Введите пароль`,passwordRequirements:`Не менее 8 символов: одна заглавная и одна строчная буква, одна цифра и один специальный символ.`,confirmPassword:`Подтвердите пароль`,confirmPasswordPlaceholder:`Повторите пароль`,viewReleaseOnGitHub:`Открыть выпуск на GitHub`,turnAllPlugsOn:`Включить все розетки`,turnAllPlugsOff:`Выключить все розетки`,clearNotificationLogs:`Очистить журнал уведомлений`,clearLogsMessage:`Все записи журнала уведомлений старше 30 дней будут безвозвратно удалены. Это действие нельзя отменить.`,clearLogs:`Очистить журнал`,resetUiPreferences:`Сбросить настройки интерфейса`,resetUiPreferencesMessage:`Будут сброшены порядок боковой панели, тема, компоновка панели, режимы отображения и сортировка. Принтеры, архивы и серверные настройки НЕ изменятся. После очистки страница перезагрузится.`,resetPreferences:`Сбросить настройки`,deleteGroupTitle:`Удаление группы`,deleteGroupMessage:`Удалить эту группу? Пользователи группы потеряют назначенные ей разрешения.`,deleteGroup:`Удалить группу`,disableAuthenticationTitle:`Отключение аутентификации`,disableAuthenticationMessage:`Отключить аутентификацию? Bambuddy станет доступен без входа. Все пользователи останутся в базе данных, но проверка учётных данных выполняться не будет.`,disableAuthentication:`Отключить аутентификацию`,configureBambuddy:`Настроить Bambuddy`,systemDefault:`Системное значение`,archiveSettings:`Настройки архива`,newWindow:`Новое окно`,embeddedOverlay:`Встроенное наложение`,preferredSlicer:`Предпочитаемый слайсер`,preferredSlicerDescription:`Слайсер для нарезки внутри приложения через API-службу`,openInSlicerLabel:`Открывать в слайсере`,openInSlicerInherit:`Как для API-слайсера`,openInSlicerDescription:`Настольный слайсер, который открывается кнопкой «Открыть в слайсере». Оставьте «Как для API-слайсера», чтобы наследовать настройку, либо выберите другой локальный слайсер.`,orcaslicerKnownIssuesWarning:`В OrcaSlicer 2.3.2 и 2.4.0-dev известны ошибки CLI, мешающие нарезке многих 3MF от Bambu: #12426 (сбой на раскрашенных файлах с несколькими экструдерами) и #13386 (слишком строгая проверка диапазонов параметров). До исправления рекомендуется Bambu Studio.`,useSlicerApi:`Использовать API слайсера`,useSlicerApiDescription:`Если включено, действия «Нарезать» открывают встроенное окно и обращаются к API-службе слайсера. Если выключено, файл передаётся настольному слайсеру через URI-схему.`,slicerCard:`Слайсер`,orcaslicerApiUrl:`URL API-службы OrcaSlicer`,bambuStudioApiUrl:`URL API-службы Bambu Studio`,slicerStallTimeout:`Тайм-аут простоя слайсера (минуты)`,slicerStallTimeoutDescription:`Прервать нарезку, если sidecar не сообщает о прогрессе в течение этого времени. Тяжёлые модели, которые продолжают сообщать о прогрессе, не прерываются, сколько бы времени ни потребовалось. Для sidecar без отчёта о прогрессе это значение используется как общий лимит времени.`,slicerApiUrlDescription:`URL контейнера API-службы слайсера. Оставьте пустым, чтобы использовать значения переменных окружения SLICER_API_URL или BAMBU_STUDIO_API_URL.`,externalCameras:`Внешние камеры`,costTracking:`Учёт затрат`,billingEnabled:`Включить расчёты`,billingEnabledDescription:`Списывать с пользователей стоимость печати и включить финансовые функции`,printerKillSwitch:`Автоостановка несанкционированной печати`,printerKillSwitchDescription:`Немедленно останавливает печать, начатую без разрешения.`,financeBudgetReset:`Ежемесячный сброс финансового бюджета`,financeBudgetResetDay:`День сброса`,financeBudgetResetDayHelp:`В коротких месяцах сброс выполняется в последний день месяца.`,financeBudgetResetTimezone:`Часовой пояс сброса`,financeBudgetResetTimezoneHelp:`Начало бюджетного периода рассчитывается в этом часовом поясе.`,rebuildLedger:`Пересчитать книгу кошелька`,rebuildLedgerStarted:`Пересчёт книги запущен`,rebuildLedgerConfirmTitle:`Пересчитать книгу кошелька?`,rebuildLedgerConfirmMessage:`Книга кошелька будет пересчитана для исправления исторических значений баланса. Запускайте это действие только если понимаете его последствия.`,rebuildLedgerInProgress:`Запуск пересчёта...`,printsOnly:`Только печать`,totalConsumption:`Общее потребление`,dataManagement:`Управление данными`,storageUsage:`Использование хранилища`,storageUsageDescription:`Распределение занятого места по категориям`,storageUsageTotal:`Всего`,storageUsageErrors:`Ошибки`,storageUsageOtherBreakdown:`Прочее (статические ресурсы, скрипты и конфигурационные файлы)`,storageUsageSystem:`Система`,storageUsageData:`Данные`,storageUsageUnavailable:`Сведения об использовании хранилища недоступны`,clearNotificationLogsDescription:`Удалить записи журнала уведомлений старше 30 дней`,resetUiPreferencesDescription:`Сбросить порядок боковой панели, тему, режимы отображения и компоновку. Принтеры, архивы и настройки не изменятся.`,enableHomeAssistant:`Включить Home Assistant`,enableMqtt:`Включить MQTT`,useTls:`Использовать TLS`,enableMetricsEndpoint:`Включить endpoint метрик`,availableMetrics:`Доступные метрики`,editUser:`Изменить пользователя`,deleteUserTitle:`Удаление пользователя`,groupName:`Название группы`,leaveEmptyForAnonymous:`Оставьте пустым для анонимного доступа`,leaveEmptyForNoAuth:`Оставьте пустым, чтобы не использовать аутентификацию`,enterNewPassword:`Введите новый пароль`,confirmNewPassword:`Повторите новый пароль`,enterGroupName:`Введите название группы`,enterDescriptionOptional:`Введите описание (необязательно)`,enterCurrentPassword:`Введите текущий пароль`,enterNewPasswordMin6:`Введите новый пароль (не менее 6 символов)`,toast:{keyCopied:`Ключ скопирован в буфер обмена`,copyFailed:`Не удалось скопировать ключ`,keyAddedToBrowser:`Ключ добавлен в обозреватель API`,clearLogsFailed:`Не удалось очистить журнал`,uiPreferencesReset:`Настройки интерфейса сброшены. Обновление страницы…`,authDisabled:`Аутентификация отключена`,authDisableFailed:`Не удалось отключить аутентификацию`,apiKeyCreated:`Ключ API создан`,apiKeyDeleted:`Ключ API удалён`,userCreated:`Пользователь создан`,userUpdated:`Пользователь обновлён`,userDeleted:`Пользователь удалён`,groupCreated:`Группа создана`,groupUpdated:`Группа обновлена`,groupDeleted:`Группа удалена`,fillRequiredFields:`Заполните все обязательные поля`,passwordsDoNotMatch:`Пароли не совпадают`,passwordTooShort:`Пароль должен содержать не менее 8 символов`,passwordNeedsUppercase:`Пароль должен содержать хотя бы одну заглавную букву`,passwordNeedsLowercase:`Пароль должен содержать хотя бы одну строчную букву`,passwordNeedsDigit:`Пароль должен содержать хотя бы одну цифру`,passwordNeedsSpecial:`Пароль должен содержать хотя бы один специальный символ`,enterGroupName:`Введите название группы`,settingsSaved:`Настройки сохранены`,noPermissionUpdate:`У вас нет прав на изменение настроек`,cameraSettingsSaved:`Настройки камеры сохранены`,enterCameraUrl:`Введите URL камеры`,passwordChanged:`Пароль изменён`,connectionFailed:`Не удалось подключиться`,testFailed:`Проверка завершилась ошибкой`,cameraConnected:`Камера подключена{{resolution}}`,cameraConnectedCoalesced:`Камера подключена{{resolution}} (используется уже выполняющийся захват)`},testConnection:`Проверить подключение`,catalog:{spoolCatalog:`Каталог катушек`,spoolCatalogDescription:`Масса пустых катушек по производителю и типу. Используется для автоматического определения массы при добавлении катушек.`,searchCatalog:`Поиск по каталогу…`,addNewEntry:`Добавить запись`,namePlaceholder:`Название (например, Bambu Lab — пластик)`,weight:`Масса`,type:`Тип`,default:`Стандартная`,custom:`Пользовательская`,noMatch:`Ничего не найдено`,empty:`Каталог пуст`,deleteEntry:`Удалить запись`,deleteConfirm:`Удалить «{{name}}»?`,resetCatalog:`Сбросить каталог`,resetConfirm:`Сбросить каталог к исходному состоянию? Все пользовательские записи будут удалены.`,loadFailed:`Не удалось загрузить каталог катушек`,nameWeightRequired:`Укажите название и массу`,entryAdded:`Запись добавлена`,addFailed:`Не удалось добавить запись`,entryUpdated:`Запись обновлена`,updateFailed:`Не удалось обновить запись`,entryDeleted:`Запись удалена`,deleteFailed:`Не удалось удалить запись`,resetSuccess:`Каталог сброшен к исходному состоянию`,resetFailed:`Не удалось сбросить каталог`,exported:`Экспортировано записей: {{count}}`,imported:`Импортировано записей: {{added}}, пропущено: {{skipped}}`,importFailed:`Не удалось импортировать: неверный формат JSON`,exportTooltip:`Экспортировать каталог в JSON`,importTooltip:`Импортировать каталог из JSON`,resetTooltip:`Сбросить к исходному состоянию`,selectedCount:`Выбрано: {{count}}`,deleteSelected:`Удалить выбранные`,bulkDeleteConfirm:`Удалить выбранные записи ({{count}})?`,bulkDeleted:`Удалено записей: {{count}}`,bulkDeleteFailed:`Не удалось удалить записи`,material:`Материал`,spoolWeight:`Масса катушки`,color:`Цвет`,updateSpoolWeight:`Обновить массу катушки`,filamentUpdated:`Филамент обновлён`,filamentUpdateFailed:`Не удалось обновить филамент`,filamentUpdateInvalid:`Некорректные данные филамента`,keepExistingSpoolWeight:`Сохранить прежнюю массу у существующих катушек`,keepExistingSpoolWeightDesc:`Катушки, уже созданные с этим типом филамента, сохранят прежнюю массу тары. Для новых катушек будет использоваться обновлённое значение.`,applyToAllSpools:`Применить ко всем катушкам`,applyToAllSpoolsDesc:`Все расчёты массы для катушек этого типа немедленно начнут использовать новую массу тары.`},colorCatalog:{title:`Каталог цветов`,description:`Цвета филамента по производителю и материалу. Используются для автоматического определения цвета при добавлении катушек.`,searchColors:`Поиск цветов…`,allManufacturers:`Все производители`,addNewColor:`Добавить цвет`,manufacturer:`Производитель`,colorName:`Название цвета`,hex:`HEX`,materialOptional:`Материал (необязательно)`,showing:`Показано {{filtered}} из {{total}} цветов`,noMatch:`Подходящие цвета не найдены`,empty:`Каталог цветов пуст`,deleteColor:`Удалить цвет`,deleteConfirm:`Удалить «{{name}}»?`,resetCatalog:`Сбросить каталог цветов`,resetConfirm:`Сбросить каталог к исходному состоянию? Все пользовательские цвета будут удалены.`,sync:`Синхронизировать`,starting:`Запуск…`,syncTooltip:`Синхронизировать с FilamentColors.xyz (более 2000 цветов; может занять около минуты)`,loadFailed:`Не удалось загрузить каталог цветов`,fieldsRequired:`Укажите производителя, название цвета и HEX-код`,colorAdded:`Цвет добавлен`,addFailed:`Не удалось добавить цвет`,colorUpdated:`Цвет обновлён`,updateFailed:`Не удалось обновить цвет`,colorDeleted:`Цвет удалён`,deleteFailed:`Не удалось удалить цвет`,resetSuccess:`Каталог цветов сброшен к исходному состоянию`,resetFailed:`Не удалось сбросить каталог цветов`,syncUpToDate:`Каталог уже актуален (проверено цветов: {{count}})`,syncComplete:`Добавлено новых цветов: {{added}}, уже существовало: {{skipped}}`,syncError:`Ошибка синхронизации`,syncFailed:`Не удалось синхронизировать каталог с FilamentColors.xyz`,exported:`Экспортировано цветов: {{count}}`,imported:`Импортировано цветов: {{added}}, пропущено: {{skipped}}`,importFailed:`Не удалось импортировать: неверный формат JSON`,selectedCount:`Выбрано: {{count}}`,deleteSelected:`Удалить выбранные`,bulkDeleteConfirm:`Удалить выбранные цвета ({{count}})?`,bulkDeleted:`Удалено цветов: {{count}}`,bulkDeleteFailed:`Не удалось удалить цвета`},dateFormat:`Формат даты`,dateFormatUs:`США (ММ/ДД/ГГГГ)`,dateFormatEu:`Европа (ДД/ММ/ГГГГ)`,dateFormatIso:`ISO (ГГГГ-ММ-ДД)`,timeFormat:`Формат времени`,timeFormat12:`12-часовой (3:30 PM)`,timeFormat24:`24-часовой (15:30)`,defaultPrinter:`Принтер по умолчанию`,defaultPrinterDescription:`Предварительно выбирать этот принтер при загрузке файлов, повторной печати и других операциях.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Изменяйте порядок, видимость и пользовательские ссылки в настройках боковой панели.`,setDefault:`Сделать стандартным`,sidebarOrderSetDefaultHint:`Текущий порядок меню будет применяться к пользователям, которые ещё не настроили его самостоятельно.`,sidebarDefaultSet:`Стандартный порядок меню сохранён.`,sidebarDefaultCleared:`Стандартный порядок меню сброшен.`,sidebarDefaultFailed:`Не удалось сохранить стандартный порядок меню.`,reset:`Сбросить`,darkMode:`Тёмная тема`,lightMode:`Светлая тема`,active:`(активна)`,background:`Фон`,accent:`Акцент`,style:`Стиль`,bgNeutral:`Нейтральный`,bgWarm:`Тёплый`,bgCool:`Холодный`,bgOled:`Чёрный OLED`,bgSlate:`Сланцево-синий`,bgForest:`Лесной зелёный`,accentGreen:`Зелёный`,accentTeal:`Бирюзовый`,accentBlue:`Синий`,accentOrange:`Оранжевый`,accentPurple:`Фиолетовый`,accentRed:`Красный`,styleClassic:`Классический`,styleGlow:`Свечение`,styleVibrant:`Насыщенный`,themeToggleHint:`Переключайте тёмную, светлую и системную тему значком в боковой панели.`,progressInTitle:`Прогресс во вкладке`,progressInTitleDescription:`Показывает процент текущей печати и кольцо прогресса во вкладке браузера.`,autoArchivePrints:`Автоматически архивировать печать`,autoArchiveDescription:`Автоматически сохранять 3MF после завершения печати`,saveThumbnailsDescription:`Извлекать и сохранять изображения предпросмотра из 3MF`,captureFinishPhotoDescription:`Сделать снимок камерой принтера после завершения печати. Во время печати Bambuddy записывает короткий таймлапс, чтобы получить кадр до опускания стола. Если таймлапс был включён для задания, файл сохранится; иначе после получения снимка он будет автоматически удалён.`,finishPhotoRestorePlate:`Поднимать стол для финального снимка`,finishPhotoRestorePlateDescription:`По окончании печати принтер опускает стол примерно на 100 мм, и готовая модель оказывается ниже кадра камеры. Bambuddy поднимает стол обратно чуть выше последнего напечатанного слоя, делает снимок и снова опускает его. Пропускается, если высота печати неизвестна или в очереди есть другое задание.`,ffmpegNotInstalled:`ffmpeg не установлен`,ffmpegRequired:`Для захвата изображения требуется ffmpeg. Установите его командой <brew>brew install ffmpeg</brew> в macOS или <apt>apt install ffmpeg</apt> в Linux.`,camera:`Камера`,cameraViewMode:`Режим просмотра камеры`,cameraOverlayDescription:`Камера открывается поверх основного экрана в окне с изменяемым размером`,cameraWindowDescription:`Камера открывается в отдельном окне браузера`,externalCamerasDescription:`Настройка внешних камер вместо встроенной камеры принтера. Поддерживаются потоки MJPEG, RTSP, HTTP-снимки и USB-камеры V4L2. Внешняя камера используется для просмотра в реальном времени и снимков после завершения печати.`,cameraPlaceholderUsb:`Путь к устройству (/dev/video0)`,cameraPlaceholderUrl:`URL камеры (rtsp://… или http://…)`,cameraTypeMjpeg:`Поток MJPEG`,cameraTypeRtsp:`Поток RTSP`,cameraTypeSnapshot:`HTTP-снимок`,cameraTypeUsb:`USB-камера (V4L2)`,cameraSnapshotUrl:`URL снимка (необязательно)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`URL одиночного кадра для миниатюр уведомлений, снимков после печати, кадров послойного таймлапса и распознавания пластины. Для таймлапса и распознавания пластины должны быть отдельно включены соответствующие настройки принтера; этот URL задаёт лишь источник изображения. Оставьте пустым, чтобы получать кадры из указанного выше видеопотока. Полезно для go2rtc (/api/frame.jpeg) и IP-камер с отдельным endpoint снимка.`,cameraRotation:`Поворот`,test:`Проверить`,connected:`Подключено`,disconnected:`Отключено`,currency:`Валюта`,defaultFilamentCost:`Стоимость филамента по умолчанию (за кг)`,electricityCost:`Стоимость электроэнергии за кВт·ч`,energyDisplayMode:`Режим отображения энергии`,energyModePrintDescription:`На панели показывается сумма энергии, израсходованной во время печати`,energyModeTotalDescription:`На панели показывается полный расход энергии по данным умных розеток`,fileManager:`Файловый менеджер`,createArchiveEntry:`Создавать запись в архиве при печати`,createArchiveEntryDescription:`При запуске печати из файлового менеджера при необходимости создавать запись в архиве`,lowDiskSpaceWarning:`Предупреждение о нехватке места`,lowDiskSpaceDescription:`Показывать предупреждение, когда свободного места остаётся меньше указанного порога`,printerFirmware:`Прошивка принтера`,checkFirmwareDescription:`Проверять наличие обновлений прошивки принтера у Bambu Lab`,bambuddySoftware:`Программное обеспечение Bambuddy`,autoCheckDescription:`Автоматически проверять наличие новых версий при запуске`,checkNow:`Проверить сейчас`,updateAvailableVersion:`Доступно обновление: v{{version}}`,releaseNotes:`Примечания к выпуску`,updateViaDocker:`Обновление через Docker Compose:`,composeDirectory:`Каталог Compose`,composeDirectoryHint:`Каталог с вашим docker-compose.yml. Оставьте пустым, чтобы не добавлять cd.`,copyUpdateCommand:`Скопировать команду обновления`,updateViaHomeAssistant:`Обновления устанавливаются через Home Assistant Supervisor. Чтобы установить новую версию, откройте в Home Assistant: Настройки → Дополнения → Bambuddy.`,updateViaWindowsInstaller:`В Windows обновление выполняется повторным запуском установщика. Скачайте новую версию ниже — данные, настройки и принтеры сохранятся.`,downloadWindowsInstaller:`Скачать установщик v{{version}}`,installUpdate:`Установить обновление`,latestVersionRunning:`Установлена последняя версия`,failedToCheckUpdates:`Не удалось проверить обновления: {{error}}`,backupRestore:`Резервное копирование и восстановление`,backupRestoreDescription:`Экспорт и импорт настроек, а также резервное копирование в GitHub`,goToBackup:`Перейти к резервным копиям`,externalUrl:`Внешний URL`,externalUrlDescription:`Внешний адрес, по которому доступен Bambuddy. Используется для изображений в уведомлениях и внешних интеграций.`,bambuddyUrl:`URL Bambuddy`,externalUrlHint:`Укажите протокол и порт, например http://192.168.1.100:8000`,ftpRetry:`Повтор FTP-операций`,ftpRetryDescription:`Повторять FTP-операции при нестабильном Wi‑Fi принтера. Применяется к скачиванию 3MF и таймлапсов, загрузке заданий и обновлению прошивки.`,autoRetryDescription:`Автоматически повторять неудачные FTP-операции`,retryAttempts:`Количество попыток`,retryDelay:`Задержка между попытками`,connectionTimeout:`Тайм-аут подключения`,time_one:`{{count}} раз`,time_other:`{{count}} раз`,second_one:`{{count}} секунда`,second_other:`{{count}} секунд`,nSeconds:`{{count}} секунд`,increaseForWeakWifi:`Увеличьте для принтеров со слабым Wi‑Fi`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Подключение к Home Assistant для управления умными розетками через REST API. Поддерживаются сущности switch, light, input_boolean и script.`,homeAssistantUrl:`URL Home Assistant`,longLivedAccessToken:`Долгосрочный токен доступа`,haTokenHint:`Создайте токен в Home Assistant: Профиль → Долгосрочные токены доступа → Создать токен`,connectionSuccessful:`Подключение установлено`,connectionFailed:`Подключиться не удалось`,haConnectionSuccess:`Подключение к Home Assistant установлено.`,haConnectionFailed:`Не удалось подключиться к Home Assistant.`,mqttPublishing:`Публикация MQTT`,mqttDescription:`Публикация событий Bambuddy во внешнем MQTT-брокере для интеграции с Node-RED, Home Assistant и другими системами автоматизации.`,mqttEnableDescription:`Публиковать события во внешнем MQTT-брокере`,brokerHostname:`Имя хоста брокера`,port:`Порт`,usernameOptional:`Имя пользователя (необязательно)`,passwordOptional:`Пароль (необязательно)`,topicPrefix:`Префикс топиков`,topicPrefixHint:`Топики будут иметь вид {{prefix}}/printers/<serial>/status и т. п.`,prometheusMetrics:`Метрики Prometheus`,prometheusEndpointDescription:`Публиковать метрики принтеров по адресу <code>/api/v1/metrics</code> для мониторинга в Prometheus/Grafana.`,bearerTokenOptional:`Bearer-токен (необязательно)`,bearerTokenHint:`Если задан, запросы должны содержать <code>Authorization: Bearer <token></code>`,metricsConnectionStatus:`Состояние подключения`,metricsPrinterState:`Состояние принтера (ожидание, печать и т. п.)`,metricsPrintProgress:`Прогресс печати, 0–100 %`,metricsBedTemp:`Температура стола`,metricsNozzleTemp:`Температура сопла`,metricsPrintsTotal:`Общее количество заданий по результату`,metricsMore:`…и другие данные: слои, вентиляторы, очередь, расход филамента`,smartPlugsDescription:`Подключение умных розеток Tasmota или Home Assistant для автоматического управления питанием принтеров и учёта энергопотребления.`,allOn:`Включить все`,allOff:`Выключить все`,addSmartPlug:`Добавить умную розетку`,energySummary:`Сводка энергопотребления`,currentPower:`Текущая мощность`,plugsOnline:`Розеток в сети: {{reachable}}/{{total}}`,today:`Сегодня`,yesterday:`Вчера`,total:`Всего`,enablePlugsForSummary:`Включите розетки, чтобы увидеть сводку энергопотребления`,addNotificationProvider:`Добавить`,systemBadge:`(системная)`,creating:`Создание…`,changing:`Изменение…`,deleteUserAndItems:`Удалить пользователя И его объекты`,deleteUserKeepItems:`Удалить пользователя, объекты оставить без владельца`,ok:`ОК`,twoFa:{totpTitle:`Приложение-аутентификатор (TOTP)`,totpDesc:`Использовать приложение-аутентификатор, например Google Authenticator, Aegis или Authy.`,emailOtpTitle:`Одноразовый код по электронной почте`,emailOtpDesc:`Отправлять одноразовый код на {{email}} при входе.`,emailOtpNoEmail:`Добавьте адрес электронной почты в учётную запись, чтобы включить этот способ.`,addEmailFirst:`В вашей учётной записи нет адреса электронной почты. Перед включением одноразовых кодов попросите администратора добавить его.`,setupTotp:`Настроить приложение-аутентификатор`,setupAuthApp:`Настроить приложение-аутентификатор`,setupInstructions:`Отсканируйте QR-код приложением-аутентификатором, затем подтвердите настройку кодом.`,manualEntry:`Не получается отсканировать? Введите этот секрет вручную:`,scannedContinue:`Код отсканирован — продолжить`,enterCodeToConfirm:`Для подтверждения настройки введите шестизначный код из приложения-аутентификатора.`,activate:`Активировать`,disableTotp:`Отключить аутентификатор`,disableConfirmHint:`Чтобы отключить аутентификатор, введите действующий код TOTP или резервный код.`,totpDisabled:`Приложение-аутентификатор отключено.`,emailOtpEnabled:`Одноразовые коды по электронной почте включены.`,emailOtpDisabled:`Одноразовые коды по электронной почте отключены.`,smtpRequired:`Сначала настройте и проверьте SMTP.`,invalidCode:`Неверный код. Повторите попытку.`,enableEmailOtp:`Включить одноразовые коды по электронной почте`,disableEmailOtp:`Отключить одноразовые коды по электронной почте`,emailSetupEnterCode:`Код подтверждения отправлен на вашу электронную почту. Введите его ниже, чтобы подтвердить доступ к этому почтовому ящику.`,verifyAndEnable:`Подтвердить и включить`,emailDisablePasswordHint:`Чтобы подтвердить отключение одноразовых кодов по электронной почте, введите пароль учётной записи.`,passwordPlaceholder:`Введите пароль`,backupCodesTitle:`Сохраните резервные коды`,backupCodesWarning:`Сохраните эти коды в надёжном месте. Каждый код можно использовать только один раз; повторно они показаны не будут.`,backupCodesRemaining:`Осталось резервных кодов: {{count}}`,savedCodes:`Я сохранил коды`,regenBackup:`Создать новые резервные коды`,regenBackupHint:`Введите текущий код TOTP, чтобы создать 10 новых резервных кодов. Все существующие резервные коды станут недействительными.`,newBackupCodes:`Новые резервные коды`,linkedAccounts:`Связанные учётные записи SSO`,linkedAccountsDesc:`Эти внешние провайдеры идентификации связаны с вашей учётной записью.`,oidcUnlinked:`Учётная запись отсоединена.`},sessionPolicy:{title:`Политика сеансов`,description:`Максимальный срок действия сеанса для новых входов пользователей. Уже выданные токены сохраняют исходный срок действия.`,preset24h:`24 часа`,preset7d:`7 дней`,preset30d:`30 дней`,customHoursLabel:`Срок действия сеанса в часах`,hoursSuffix:`часов`,warning:`Длительные сеансы снижают защиту автоматическим выходом. Рекомендуется только для доверенных установок с одним пользователем.`},oidc:{title:`Провайдеры SSO / OIDC`,desc:`Настройка провайдеров OpenID Connect для единого входа через внешние службы идентификации.`,addProvider:`Добавить провайдера`,newProvider:`Новый провайдер`,empty:`Провайдеры OIDC пока не настроены.`,created:`Провайдер создан.`,updated:`Провайдер обновлён.`,deleted:`Провайдер удалён.`,refreshIcon:`Обновить значок`,removeIcon:`Удалить значок`,iconRefreshed:`Значок обновлён.`,iconRemoved:`Значок удалён.`,iconFetchFailed:`Не удалось получить значок по URL провайдера.`,deleteTitle:`Удалить провайдера`,deleteMessage:`Удалить «{{name}}»? Все связанные учётные записи пользователей будут отсоединены.`,form:{name:`Отображаемое имя`,issuerUrl:`URL издателя`,clientId:`Идентификатор клиента`,clientSecret:`Секрет клиента`,scopes:`Области доступа`,iconUrl:`URL значка (необязательно)`,enabled:`Включён`,autoCreate:`Автоматически создавать пользователей`,autoCreateDesc:`Автоматически создавать локальную учётную запись при первом входе.`,autoLink:`Автоматически связывать существующие учётные записи`,autoLinkDesc:`При первом входе связывать локальные учётные записи по совпадающему адресу электронной почты.`,secretHint:`оставьте пустым, чтобы сохранить текущий`,secretPlaceholder:`новый секрет`,emailClaim:`Поле электронной почты`,emailClaimDesc:`Поле JWT, используемое как адрес электронной почты. Для Azure Entra ID, который не передаёт email_verified, используйте preferred_username или upn. Указывайте только доверенные поля.`,emailClaimPlaceholder:`email`,emailClaimCustomClaimAutoLinkWarning:`Пользовательское поле безопасно для автоматического связывания только тогда, когда его значение назначается администратором арендатора, например upn или preferred_username в Azure Entra ID. Не включайте автоматическое связывание, если ваш IdP позволяет пользователям самостоятельно задавать это поле.`,requireEmailVerified:`Требовать подтверждённый адрес электронной почты`,requireEmailVerifiedDesc:`Принимать адрес электронной почты только в том случае, если провайдер пометил его как подтверждённый.`,requireEmailVerifiedWarning:`Предупреждение: адрес будет принят даже без подтверждения. Используйте только с доверенными провайдерами.`,requireEmailVerifiedAutoLink:`Чтобы изменить этот параметр, сначала отключите автоматическое связывание.`,defaultGroup:`Группа по умолчанию`,defaultGroupDesc:`Группа для автоматически созданных пользователей. Если не задана, используется группа «Наблюдатели».`,defaultGroupViewersFallback:`Наблюдатели (по умолчанию)`,autologin:`Автоматический вход`,autologinDesc:`Сразу перенаправлять неавторизованных посетителей к этому провайдеру. Этот флаг может быть установлен только у одного провайдера.`}},encryption:{title:`Состояние шифрования MFA`,enabledFromEnv:`Шифрование данных включено; ключ получен из переменной окружения MFA_ENCRYPTION_KEY`,enabledFromFile:`Шифрование данных включено; ключ загружен из каталога данных`,enabledGenerated:`Шифрование данных включено с автоматически созданным ключом`,notConfigured:`Шифрование хранимых данных не настроено`,notConfiguredDesc:`Секреты TOTP и client_secret провайдеров OIDC хранятся открытым текстом. Задайте MFA_ENCRYPTION_KEY или перезапустите Bambuddy с доступным для записи каталогом данных, чтобы ключ был создан автоматически.`,allEncrypted:`Все секреты MFA зашифрованы при хранении.`,legacyRowsLabel:`Старые записи открытым текстом`,encryptedRowsLabel:`Зашифрованные записи`,legacyRowsWarning:`Обнаружено старых записей открытым текстом: {{count}}. Чтобы перенести их в зашифрованное хранилище, повторно сохраните провайдера OIDC или заново подключите приложение-аутентификатор пользователя.`,backupHint:`Автоматически созданный ключ хранится в DATA_DIR/.mfa_encryption_key и включается в локальные ZIP-копии. Храните резервные копии в безопасном месте либо задайте MFA_ENCRYPTION_KEY явно.`,decryptionBrokenTitle:`Отсутствует ключ шифрования`,decryptionBrokenError:`Невозможно расшифровать записей: {{count}}, поскольку ключ шифрования больше недоступен. Для восстановления верните прежний MFA_ENCRYPTION_KEY или файл DATA_DIR/.mfa_encryption_key.`,migrationErrorWarning:`Не удалось повторно зашифровать старых записей при запуске: {{count}}. Проверьте журнал сервера и перезапустите Bambuddy для повторной попытки.`},pipelineLimits:{title:`Ограничения конвейеров слайсера`,maxCopiesLabel:`Максимум копий за запуск`,maxCopiesDesc:`Верхний предел количества копий, которое оператор может запросить при запуске конвейера. Жёсткое серверное ограничение — 1000.`},pipelines:{title:`Конвейеры слайсера`,subtitle:`Повторно используемые наборы профилей: принтер, процесс, филаменты и тип стола. Сохраните набор в окне нарезки и применяйте его к следующему файлу одним нажатием.`,loading:`Загрузка конвейеров...`,loadError:`Не удалось загрузить конвейеры.`,confirmDelete:`Удалить этот конвейер? Отменить действие нельзя.`,staleWarning:`Один или несколько связанных профилей больше не существуют. Чтобы исправить конвейер, повторно сохраните его из окна нарезки.`,empty:{title:`Конвейеров пока нет.`,howto:`Откройте окно нарезки любого файла, выберите принтер, процесс, филаменты и тип стола, затем нажмите «Сохранить как конвейер». Сохранённые конвейеры появятся здесь.`},field:{name:`Название конвейера`,description:`Описание`,targetPrinter:`Целевой принтер`,noTarget:`— Цель не задана —`,targetKind:`Тип цели`,targetKindSpecific:`Конкретный принтер`,targetKindClass:`Класс принтеров`,targetModelClass:`Модель принтера`,fanoutStrategy:`Стратегия распределения`,fanout:{max_parallel:`Максимум параллельно — распределять между любыми свободными подходящими принтерами`,round_robin:`По кругу — последовательно чередовать подходящие принтеры`,fill_one_first:`Сначала один — назначить все копии одному принтеру`},fanoutShort:{max_parallel:`параллельно`,round_robin:`по кругу`,fill_one_first:`сначала один`}},action:{save:`Сохранить`,cancel:`Отмена`,rename:`Переименовать`,delete:`Удалить`},slot:{printer:`Принтер`,process:`Процесс`,filament:`Филамент`,filamentN:`Филамент {{n}}`,filamentAll:`Все слоты: {{n}}`,bed:`Стол`},group:{profiles:`Профили`,filaments:`Филаменты`},searchPlaceholder:`Поиск конвейеров...`,filterTargetType:`Фильтр по типу цели`,filterTarget:`Фильтр по цели`,filter:{all:`Все цели`,noTarget:`Цель не задана`,count:`{{shown}} из {{total}}`,noMatches:`Нет конвейеров, соответствующих текущим фильтрам.`},toast:{saved:`Конвейер сохранён`,saveFailed:`Не удалось сохранить`,deleted:`Конвейер удалён`,deleteFailed:`Не удалось удалить`},noTargetHint:`Чтобы запустить, задайте целевой принтер`,noTargetWarning:`Перед запуском конвейера задайте целевой принтер.`,runs:{lastRun:`Последний запуск`,status:{queued:`в очереди`,slicing:`нарезка`,dispatching:`назначение`,in_progress:`печать`,completed:`завершено`,failed:`ошибка`,partial_failure:`частичная ошибка`,cancelled:`отменено`}}}},notification:{printStarted:{title:`Печать началась`,body:`{{printer}}: началась печать файла {{filename}}`},printCompleted:{title:`Печать завершена`,body:`{{printer}}: файл {{filename}} успешно напечатан`},printFailed:{title:`Ошибка печати`,body:`{{printer}}: печать файла {{filename}} завершилась ошибкой`},printStopped:{title:`Печать остановлена`,body:`{{printer}}: печать файла {{filename}} остановлена`},printProgress:{title:`Ход печати`,body:`{{printer}}: файл {{filename}} напечатан на {{percent}}%`},printerOffline:{title:`Принтер не в сети`,body:`{{printer}} не в сети`},printerError:{title:`Ошибка принтера`,body:`{{printer}}: {{error}}`},filamentLow:{title:`Заканчивается филамент`,body:`{{printer}}: осталось мало филамента`},maintenanceDue:{title:`Требуется обслуживание`,body:`{{printer}}: требуют внимания: {{items}}`}},errors:{generic:`Что-то пошло не так`,networkError:`Ошибка сети. Проверьте подключение.`,notFound:`Не найдено`,unauthorized:`Доступ не разрешён`,serverError:`Ошибка сервера`,validationError:`Проверьте введённые данные`,printerConnectionFailed:`Не удалось подключиться к принтеру`,saveFailed:`Не удалось сохранить изменения`,deleteFailed:`Не удалось удалить`,loadFailed:`Не удалось загрузить данные`},hmsErrors:{title:`Ошибки — {{name}}`,noErrors:`Ошибок нет`,viewOnWiki:`Открыть в Bambu Lab Wiki`,mqttVerifyFailedRemedy:`Включите режим разработчика на принтере, перезагрузите принтер и запустите задание снова.`,unknownCode:`Неизвестный код HMS — подробности см. в Bambu Lab Wiki.`,clearInstructions:`Устраните ошибки на принтере, чтобы они исчезли из этого списка.`,clearErrors:`Очистить ошибки`,clearSuccess:`Ошибки HMS очищены`,clearFailed:`Не удалось очистить ошибки HMS`,actionSuccess:`Команда отправлена принтеру`,actionFailed:`Не удалось отправить команду`,runoutExpectedSlot:`Филамент закончился в {{ranOut}}. Теперь принтер ожидает совместимый филамент в {{expected}}. Установите катушку в {{expected}}, затем выберите «Повторить».`,runoutExpectedSlotOnly:`Принтер ожидает совместимый филамент в {{expected}}. Установите туда катушку, затем выберите «Повторить».`,runoutSlotUnknown:`Филамент закончился, и печать приостановлена. Bambuddy не смог определить, какой слот теперь ожидает принтер. Проверьте запрошенный слот на экране принтера.`,actions:{RESUME_PRINTING:`Продолжить печать`,RESUME_PRINTING_DEFECTS:`Продолжить (дефекты допустимы)`,RESUME_PRINTING_PROBELM_SOLVED:`Продолжить (проблема устранена)`,STOP_PRINTING:`Остановить печать`,CHECK_ASSISTANT:`Проверить помощник`,FILAMENT_EXTRUDED:`Филамент выдавливается — продолжить`,RETRY_FILAMENT_EXTRUDED:`Филамент ещё не выходит — повторить`,CONTINUE:`Готово — продолжить`,LOAD_VIRTUAL_TRAY:`Загрузить филамент`,OK_BUTTON:`ОК`,FILAMENT_LOAD_RESUME:`Филамент загружен — продолжить`,JUMP_TO_LIVEVIEW:`Открыть камеру`,NO_REMINDER_NEXT_TIME:`Больше не напоминать`,REFRESH_NOZZLE:`Проверить ещё раз`,IGNORE_NO_REMINDER_NEXT_TIME:`Игнорировать и больше не напоминать`,IGNORE_RESUME:`Игнорировать и продолжить`,PROBLEM_SOLVED_RESUME:`Проблема устранена — продолжить`,TURN_OFF_FIRE_ALARM:`Понятно, отключить пожарную тревогу`,RETRY_PROBLEM_SOLVED:`Повторить (проблема устранена)`,CANCLE:`Отмена`,STOP_DRYING:`Остановить сушку`,PROCEED:`Продолжить`,OK_JUMP_RACK:`ОК`,ABORT:`Прервать`,DISABLE_PURIFICATION:`Отключить очистку воздуха для этой печати`,DONT_REMIND_NEXT_TIME:`Больше не напоминать`,DBL_CHECK_CANCEL:`Отмена`,DBL_CHECK_DONE:`Готово`,DBL_CHECK_RETRY:`Повторить`,DBL_CHECK_RESUME:`Продолжить`,DBL_CHECK_OK:`Подтвердить`,REMOVE_CLOSE_BTN:`Закрыть`}},mqttDebug:{title:`Журнал отладки MQTT`,searchPlaceholder:`Поиск по теме или содержимому...`,noMessages:`Сообщений пока нет`,startLoggingHint:`Нажмите «Начать запись», чтобы перехватывать сообщения MQTT`,noMessagesMatch:`Нет сообщений, соответствующих фильтру`,adjustFilterHint:`Измените запрос или параметры фильтра`,incoming:`Входящие`,outgoing:`Исходящие`,loggingStopped:`Запись остановлена`,loggingActive:`Запись активна — сообщения обновляются автоматически`,startLogging:`Начать запись`,stopLogging:`Остановить запись`,clearLog:`Очистить журнал`,topic:`Тема`,timestamp:`Время`,direction:`Направление`,all:`Все`},printerFiles:{zipStarted_one:`Начато скачивание ZIP для {{count}} файла`,zipStarted_other:`Начато скачивание ZIP для {{count}} файлов`,zipPartial:`Начато скачивание ZIP с {{successful}} из {{total}} файлов; остальные получить не удалось`,downloadFailed:`Ошибка скачивания: {{error}}`,unknownError:`Неизвестная ошибка`,shiftSelectHint:`Щёлкните с Shift, чтобы выбрать диапазон`,selectFile:`Выбрать {{name}}`,deselectFile:`Снять выбор с {{name}}`,title:`Файлы принтера`,storageUsed:`Занято:`,storageFree:`Свободно:`,filterPlaceholder:`Фильтр файлов...`,deleteButton:`Удалить`,deleteFiles:`Удалить файлы: {{count}}`,deleteFileConfirm:`Удалить «{{name}}»? Это действие нельзя отменить.`,deleteFilesConfirm:`Удалить выбранные файлы ({{count}})? Это действие нельзя отменить.`,noFiles:`На принтере нет файлов`,printerUnavailable:`Файловая служба принтера недоступна. Повторите попытку, когда принтер будет доступен.`,loadingFiles:`Загрузка файлов...`,failedToLoad:`Не удалось загрузить файлы`,toast:{filesDeleted:`Удалено файлов: {{count}}`,deleteFailed:`Не удалось удалить: {{error}}`}},confirm:{delete:`Удалить этот объект?`,unsavedChanges:`Есть несохранённые изменения. Всё равно уйти со страницы?`,clearQueue:`Очистить очередь печати?`},login:{title:`Вход в Bambuddy`,subtitle:`Войдите в свою учётную запись`,username:`Имя пользователя`,usernamePlaceholder:`Введите имя пользователя`,usernameOrEmail:`Имя пользователя или email`,usernameOrEmailPlaceholder:`Имя пользователя или email`,password:`Пароль`,passwordPlaceholder:`Введите пароль`,signIn:`Войти`,signingIn:`Вход...`,rememberMe:`Запомнить меня`,forgotPassword:`Забыли пароль?`,autologinFailed:`Автоматический вход через SSO не выполнен. Выберите провайдера ниже.`,localDisabledNotice:`Локальный вход отключён. Используйте одного из SSO-провайдеров ниже.`,loginSuccess:`Вход выполнен`,loginFailed:`Не удалось войти`,enterCredentials:`Введите имя пользователя и пароль`,enterEmail:`Введите адрес электронной почты`,oidcLoginFailed:`Ошибка входа через OIDC`,oidcErrors:{providerError:`Провайдер удостоверений вернул ошибку`,missingParameters:`В ответе OIDC отсутствуют обязательные параметры`,invalidState:`Состояние OIDC недействительно или уже использовано`,stateExpired:`Сеанс входа OIDC истёк — повторите попытку`,providerNotFound:`Провайдер OIDC не найден`,discoveryFailed:`Не удалось получить документ обнаружения OIDC`,invalidDiscovery:`Документ обнаружения OIDC недействителен`,networkError:`Сетевая ошибка при обмене токена OIDC`,badResponse:`Неожиданный ответ при обмене токена OIDC`,noIdToken:`Провайдер OIDC не вернул ID-токен`,validationFailed:`Не удалось проверить токен OIDC`,nonceMismatch:`Несовпадение nonce OIDC — возможна атака повторного воспроизведения`,missingSubClaim:`В токене OIDC отсутствует поле sub`,noLinkedAccount:`С этой учётной записью OIDC не связана локальная учётная запись`,accountInactive:`Учётная запись неактивна`,userResolutionFailed:`Не удалось определить учётную запись`,internalError:`Внутренняя ошибка при входе через OIDC`,tokenExchangeFailed:`Не удалось обменять токен OIDC`},forgotPasswordTitle:`Восстановление пароля`,forgotPasswordMessage:`Обратитесь к системному администратору для сброса пароля.`,forgotPasswordEmailMessage:`Введите адрес электронной почты, и мы отправим новый пароль.`,emailAddress:`Адрес электронной почты`,emailPlaceholder:`your.email@example.com`,cancel:`Отмена`,sending:`Отправка...`,sendResetEmail:`Отправить письмо для сброса`,howToReset:`Как сбросить пароль:`,resetStep1:`Свяжитесь с администратором Bambuddy`,resetStep2:`Попросите сбросить пароль в разделе управления пользователями`,resetStep3:`Администратор задаст новый временный пароль`,resetStep4:`Войдите с новым паролем и измените его в настройках`,gotIt:`Понятно`,resetPassword:{title:`Новый пароль`,subtitle:`Введите и подтвердите новый пароль.`,newPassword:`Новый пароль`,newPasswordPlaceholder:`Не менее 8 символов`,confirmPassword:`Подтверждение пароля`,confirmPasswordPlaceholder:`Повторите новый пароль`,saving:`Сохранение…`,submit:`Установить новый пароль`,backToLogin:`Вернуться ко входу`,passwordsDoNotMatch:`Пароли не совпадают`,passwordTooShort:`Пароль должен содержать не менее 8 символов`,resetFailed:`Не удалось сбросить пароль. Возможно, ссылка устарела.`},twoFA:{title:`Двухфакторная аутентификация`,subtitle:`Учётная запись защищена 2FA. Введите код подтверждения.`,methodAuthenticator:`Приложение-аутентификатор`,methodEmail:`Код по email`,methodBackup:`Резервный код`,instructionsTotp:`Откройте приложение-аутентификатор и введите шестизначный код Bambuddy.`,instructionsEmail:`Шестизначный код отправлен на вашу электронную почту. Он действует 10 минут.`,instructionsEmailNotSent:`Нажмите кнопку ниже, чтобы получить код подтверждения по email.`,instructionsBackup:`Введите один из восьмизначных резервных кодов восстановления. Каждый код используется только один раз.`,sendCodeButton:`Отправить код по email`,sendingCode:`Отправка...`,resendCode:`Отправить код повторно`,codeLabel:`Код подтверждения`,backupCodeLabel:`Резервный код`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Подтвердить`,verifyingButton:`Проверка...`,backToLogin:`← Вернуться ко входу`,orContinueWith:`или продолжить через`,signInWith:`Войти через {{provider}}`,enterCode:`Введите код подтверждения`,sendCodeFailed:`Не удалось отправить код подтверждения`,invalidCode:`Неверный код. Повторите попытку.`}},setup:{title:`Настройка Bambuddy`,subtitle:`Настройте аутентификацию для этого экземпляра Bambuddy`,enableAuth:`Включить аутентификацию`,adminAccount:`Учётная запись администратора`,adminAccountDesc:`Если администраторы уже существуют, аутентификация будет включена с использованием существующих учётных записей. Оставьте поля пустыми или введите данные для создания нового администратора.`,adminUsername:`Имя администратора`,adminPassword:`Пароль администратора`,optionalIfAdminExists:`(необязательно, если администратор уже существует)`,adminUsernamePlaceholder:`Введите имя администратора (необязательно)`,adminPasswordPlaceholder:`Введите пароль администратора (необязательно)`,confirmPassword:`Подтвердите пароль`,confirmPasswordPlaceholder:`Повторите пароль администратора`,settingUp:`Настройка...`,completeSetup:`Завершить настройку`,toast:{authEnabledAdminCreated:`Аутентификация включена, администратор создан`,authEnabledExistingAdmins:`Аутентификация включена для существующих администраторов`,setupCompleted:`Настройка завершена`,enterBothCredentials:`Введите имя и пароль администратора либо оставьте оба поля пустыми`,passwordsDoNotMatch:`Пароли не совпадают`,passwordTooShort:`Пароль должен содержать не менее 6 символов`}},changePassword:{title:`Изменение пароля`,currentPassword:`Текущий пароль`,currentPasswordPlaceholder:`Введите текущий пароль`,newPassword:`Новый пароль`,newPasswordPlaceholder:`Введите новый пароль (не менее 6 символов)`,confirmPassword:`Подтвердите новый пароль`,confirmPasswordPlaceholder:`Повторите новый пароль`,passwordsDoNotMatch:`Пароли не совпадают`,passwordTooShort:`Пароль должен содержать не менее 6 символов`,changing:`Изменение...`,success:`Пароль изменён`,failed:`Не удалось изменить пароль`},plateAlert:{title:`Печать приостановлена!`,message:`На печатной пластине обнаружены объекты. Печать автоматически приостановлена. Очистите пластину и продолжите печать.`,understand:`Понятно`},camera:{title:`Камера`,invalidPrinterId:`Неверный идентификатор принтера`,live:`Прямой эфир`,snapshot:`Снимок`,restartStream:`Перезапустить поток`,refreshSnapshot:`Обновить снимок`,fullscreen:`На весь экран`,exitFullscreen:`Выйти из полноэкранного режима`,connectingToCamera:`Подключение к камере...`,capturingSnapshot:`Создание снимка...`,connectionLost:`Соединение потеряно`,connectionFailed:`Не удалось подключиться к камере`,reconnecting:`Повторное подключение через {{countdown}} с... (попытка {{attempt}} из {{max}})`,reconnectNow:`Подключиться сейчас`,cameraUnavailable:`Камера недоступна`,cameraUnavailableDesc:`Убедитесь, что принтер включён и подключён к сети.`,noCamera:`Камера отсутствует`,retry:`Повторить`,cameraStream:`Видеопоток камеры`,zoomOut:`Уменьшить`,zoomIn:`Увеличить`,resetZoom:`Сбросить масштаб`,recording:`Запись`,startRecording:`Начать запись`,stopRecording:`Остановить запись`,chamberLight:`Переключить освещение камеры принтера`,unavailable:`Камера недоступна`,diagnose:{button:`Диагностика`,modalTitle:`Диагностика камеры`,running:`Выполняется диагностика...`,runFailed:`Не удалось выполнить диагностику: {{error}}`,retry:`Запустить снова`,stage:{tcp_reachable:`Доступность по сети`,first_frame:`Получение кадра`,live_stream_active:`Активный видеопоток`},summary:{all_ok:`Камера работает. Все этапы диагностики завершены успешно.`,live_stream_active_healthy:`Камера уже передаёт свежие кадры — дополнительная проверка не требуется.`,printer_unreachable:`Принтер недоступен. Проверьте IP-адрес, сетевое подключение и питание принтера.`,camera_port_closed:`Принтер доступен, но порт камеры закрыт. Убедитесь, что в настройках принтера включены режим «Только LAN» и режим разработчика.`,no_frame:`Подключение к камере установлено, но кадры не поступают. Повторите попытку или проверьте, включена ли камера в настройках принтера.`,unknown_failure:`Диагностика камеры завершилась неизвестной ошибкой. Подробности см. в журнале поддержки.`},meta:{protocol:`Протокол`,port:`Порт`,profile:`Профиль`}}},groups:{title:`Управление группами`,subtitle:`Настройка групп разрешений для контроля доступа`,backToSettings:`Вернуться к настройкам`,createGroup:`Создать группу`,noPermission:`У вас нет доступа к этой странице.`,system:`Системная`,noDescription:`Без описания`,usersCount:`Пользователей: {{count}}`,permissionsCount:`Разрешений: {{count}}`,edit:`Изменить`,delete:`Удалить`,toast:{created:`Группа создана`,updated:`Группа обновлена`,deleted:`Группа удалена`,enterGroupName:`Введите название группы`},modal:{editGroup:`Изменение группы`,createGroup:`Создание группы`,cancel:`Отмена`,saving:`Сохранение...`,creating:`Создание...`,saveChanges:`Сохранить изменения`},form:{groupName:`Название группы`,groupNamePlaceholder:`Введите название группы`,systemGroupWarning:`Названия системных групп изменить нельзя`,description:`Описание`,descriptionPlaceholder:`Введите описание (необязательно)`,permissions:`Разрешения (выбрано: {{count}})`},deleteModal:{title:`Удаление группы`,message:`Удалить эту группу? Входящие в неё пользователи потеряют соответствующие разрешения.`,confirm:`Удалить группу`},editor:{title:`Изменение группы`,createTitle:`Создание группы`,search:`Поиск разрешений...`,selectAll:`Выбрать все`,clearAll:`Очистить выбор`,permissionsSelected:`Выбрано: {{count}}`,noResults:`Нет разрешений, соответствующих запросу`,websocketHint:`Необходимо для обновлений в реальном времени. Без этого интерфейс будет периодически опрашивать сервер.`}},users:{title:`Управление пользователями`,subtitle:`Управление пользователями и их доступом к Bambuddy`,backToSettings:`Вернуться к настройкам`,createUser:`Создать пользователя`,noPermission:`У вас нет доступа к этой странице.`,admin:`Администратор`,noGroups:`Без групп`,active:`Активен`,inactive:`Отключён`,edit:`Изменить`,delete:`Удалить`,system:`Системный`,noGroupsAvailable:`Нет доступных групп`,table:{username:`Имя пользователя`,groups:`Группы`,status:`Состояние`,actions:`Действия`},toast:{created:`Пользователь создан`,updated:`Пользователь обновлён`,deleted:`Пользователь удалён`,fillRequired:`Заполните все обязательные поля`,passwordsDoNotMatch:`Пароли не совпадают`,passwordTooShort:`Пароль должен содержать не менее 6 символов`,ldapProvisioned:`Пользователь LDAP «{{username}}» добавлен`},modal:{createUser:`Создание пользователя`,editUser:`Изменение пользователя`,cancel:`Отмена`,creating:`Создание...`,saving:`Сохранение...`,saveChanges:`Сохранить изменения`,advancedAuthSubtitle:`с расширенной аутентификацией`,tabsAriaLabel:`Источник пользователя`,localTab:`Локальный`,ldapTab:`LDAP`,ldapSearchLabel:`Поиск в каталоге`,ldapSearchPlaceholder:`Введите имя пользователя, имя или email...`,ldapMinChars:`Для поиска введите не менее 2 символов`,ldapTypeToSearch:`Начните вводить запрос для поиска в каталоге LDAP`,ldapSearching:`Поиск в каталоге...`,ldapNoResults:`В каталоге нет подходящих пользователей`,ldapSearchError:`Ошибка поиска в каталоге. Проверьте состояние сервера LDAP.`,ldapAlreadyProvisioned:`Уже добавлен`,ldapSelectedLabel:`Выбран`,ldapProvision:`Добавить пользователя`,ldapProvisioning:`Добавление...`,ldapErrorProvision:`Не удалось добавить пользователя. Проверьте сервер LDAP и повторите попытку.`},form:{username:`Имя пользователя`,usernamePlaceholder:`Введите имя пользователя`,email:`Электронная почта`,emailPlaceholder:`user@example.com`,password:`Пароль`,passwordPlaceholder:`Введите пароль`,confirmPassword:`Подтверждение пароля`,confirmPasswordPlaceholder:`Повторите пароль`,newPasswordPlaceholder:`Введите новый пароль`,confirmNewPasswordPlaceholder:`Повторите новый пароль`,leaveBlankToKeep:`оставьте пустым, чтобы сохранить текущий`,groups:`Группы`,optional:`необязательно`,autoGeneratedPassword:`Надёжный пароль будет создан автоматически и отправлен пользователю по email.`,passwordManagedByAdvancedAuth:`Пароль управляется расширенной аутентификацией. Используйте «Сбросить пароль», чтобы отправить пользователю новый пароль по email.`,resetPassword:`Сбросить пароль`,resettingPassword:`Сброс пароля...`},deleteModal:{title:`Удаление пользователя`,message:`Удалить этого пользователя? Это действие нельзя отменить.`,confirm:`Удалить пользователя`}},streamOverlay:{title:`Оформление трансляции`,invalidPrinterId:`Неверный идентификатор принтера`,cameraStream:`Видеопоток камеры`,progress:`Прогресс`,eta:`Осталось`,printerIdle:`Принтер простаивает`,printerOffline:`Принтер не в сети`,builder:{title:`Оформление трансляции`,description:`Собирает адрес оформления трансляции: полноэкранное изображение камеры с наложенными данными о печати — для OBS, настенного экрана или любого источника-браузера. Выберите нужные поля и скопируйте адрес.`,printer:`Принтер`,size:`Размер текста`,sizeSmall:`Мелкий`,sizeMedium:`Средний`,sizeLarge:`Крупный`,fps:`Частота кадров`,fpsHint:`Камеры A1 и P1 выдают не более примерно 5 кадров в секунду, какое бы значение вы ни задали.`,token:`Токен оформления трансляции (необязательно)`,tokenHint:`Нужен только при включённом входе: у OBS нет собственного сеанса. Создайте его выше с областью «Оформление трансляции».`,tokenWarning:`Этот адрес содержит токен: любой, кто его прочитает, увидит трансляцию и имя файла. Отзовите токен, чтобы закрыть доступ.`,fields:`Показываемые поля`,fieldPrinter:`Имя принтера`,fieldFilename:`Имя файла`,fieldStatus:`Состояние`,fieldProgress:`Полоса прогресса`,fieldLayers:`Количество слоёв`,fieldEta:`Оставшееся время и время окончания`,fieldCamera:`Изображение камеры`,chamberHint:`Температура камеры показывается только на моделях с настоящим датчиком: P1 и A1 сообщают бессмысленное значение, поэтому она опускается.`,urlTitle:`Адрес оформления`,open:`Открыть`,showPreview:`Показать предпросмотр`,hidePreview:`Скрыть предпросмотр`,previewTitle:`Предпросмотр оформления`},status:{printing:`Печать`,paused:`Приостановлено`,finished:`Завершено`,failed:`Ошибка`,idle:`Ожидание`,unknown:`Неизвестно`}},profiles:{title:`Профили`,subtitle:`Управление профилями слайсера и калибровками Pressure Advance`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Локальные профили`,kprofiles:`K-профили`},orcaCloud:{connectedAs:`Подключено как`,connectedShort:`Подключено к Orca Cloud`,logout:`Отключиться`,noLogoutPermission:`У вас нет разрешения отключаться от Orca Cloud`,noConnectPermission:`У вас нет разрешения подключаться к Orca Cloud`,retry:`Повторить`,connectButton:`Подключить Orca Cloud`,connect:{title:`Подключение к Orca Cloud`,description:`Войдите в Orca Cloud, чтобы синхронизировать профили слайсера с Bambuddy.`},device:{title:`Разрешите доступ Bambuddy в Orca Cloud`,instruction:`Откройте Orca Cloud и подтвердите этот код. После подтверждения Bambuddy подключится автоматически.`,codeLabel:`Код сопряжения`,openButton:`Открыть страницу подтверждения Orca Cloud`,manualHint:`Либо откройте {{url}} и введите указанный выше код.`,waiting:`Ожидание подтверждения…`,cancel:`Отмена`},profiles:{title:`Ваши профили Orca Cloud ({{count}})`,refresh:`Обновить`,empty:`В вашей учётной записи Orca Cloud пока нет профилей.`},toast:{disconnected:`Orca Cloud отключён`},errors:{startFailed:`Не удалось начать вход в Orca Cloud.`,denied:`Сопряжение отклонено в Orca Cloud.`,expired:`Срок действия кода сопряжения истёк. Нажмите «Подключить», чтобы повторить попытку.`,pollFailed:`Соединение было потеряно во время ожидания подтверждения. Повторите попытку.`}},localProfiles:{title:`Локальные профили`,subtitle:`Импорт профилей OrcaSlicer и управление ими`,import:`Импортировать профили`,importDesc:`Перетащите сюда файлы .bbscfg, .bbsflmt, .orca_filament, .zip или .json`,importing:`Импорт...`,search:`Поиск локальных профилей...`,noPresets:`Локальных профилей пока нет`,noSearchResults:`Нет профилей, соответствующих запросу`,badge:`Локальный`,edit:`Изменить`,delete:`Удалить`,cancel:`Отмена`,deleteConfirmTitle:`Удаление профиля`,deleteConfirm:`Удалить этот профиль? Это действие нельзя отменить.`,source:`Источник`,inheritsFrom:`Наследует`,filamentType:`Тип`,vendor:`Производитель`,compatiblePrinters:`Принтеры`,nozzleTemp:`Температура сопла`,cost:`Стоимость`,density:`Плотность`,pressureAdvance:`Опережение давления`,filament:`Филамент`,process:`Процесс`,printer:`Принтер`,toast:{importSuccess:`Импортировано профилей: {{count}}`,importSkipped:`Пропущено дубликатов: {{count}}`,importError:`Ошибок при импорте: {{count}}`,deleted:`Профиль удалён`,updated:`Профиль обновлён`}},connectedAs:`Подключено как`,signInExpiredTitle:`Срок авторизации в Bambu Cloud истёк`,signInExpiredBody:`Bambu Lab больше не принимает сохранённый токен. Выполните вход снова, чтобы восстановить облачные профили, импорт из MakerWorld и проверку прошивок.`,logout:`Выйти`,noLogoutPermission:`У вас нет разрешения выходить из учётной записи`,failedToLoad:`Не удалось загрузить профили`,retry:`Повторить`,time:{justNow:`Только что`,minsAgo:`{{count}} мин назад`,hoursAgo:`{{count}} ч назад`,daysAgo:`{{count}} дн назад`},toast:{loggedOut:`Вы вышли из учётной записи`},login:{title:`Подключение к Bambu Cloud`,subtitle:`Синхронизация профилей слайсера между устройствами`,email:`Электронная почта`,password:`Пароль`,region:`Регион`,regionGlobal:`Глобальный`,regionChina:`Китай`,verificationCode:`Код подтверждения`,totpCode:`Код приложения-аутентификатора`,checkEmail:`Проверьте почту {{email}}: туда отправлен шестизначный код`,enterTotpHint:`Введите шестизначный код из приложения-аутентификатора`,accessToken:`Токен доступа`,accessTokenHint:`Вставьте токен доступа Bambu Cloud. Для учётных записей китайского региона, привязанных к телефону, доступен только этот способ: вход по email не поддерживается. Инструкцию по получению токена из cookie MakerWorld см. в wiki.`,back:`Назад`,loginButton:`Войти`,verifyButton:`Подтвердить`,setTokenButton:`Сохранить токен`,useToken:`Использовать токен доступа`,captchaTitle:`Bambu Cloud требует пройти CAPTCHA`,captchaBody:`Bambu требует от вашей сети пройти CAPTCHA, прежде чем принять вход, и ответить на эту проверку из Bambuddy невозможно. Дело не в почте и не в пароле. Блокировка привязана к вашему публичному IP-адресу и обычно снимается сама в течение нескольких часов, а повторные попытки только продлевают её. Чтобы войти сейчас, используйте токен доступа из сессии браузера.`,useEmail:`Войти по email`,toast:{loggedIn:`Вход выполнен`,codeSent:`Код подтверждения отправлен по email`,enterTotp:`Введите код из приложения-аутентификатора`,tokenSet:`Токен сохранён`}},presets:{myPreset:`Мой профиль (редактируемый)`,duplicate:`Создать копию`,editable:`Редактируемый`,failedToLoadDetails:`Не удалось загрузить сведения о профиле`,deleteConfirm:`Удалить этот профиль?`,deleteWarning:`Профиль «{{name}}» будет безвозвратно удалён из Bambu Cloud. Это действие нельзя отменить.`,noDuplicatePermission:`У вас нет разрешения копировать профили`,noEditPermission:`У вас нет разрешения редактировать профили`,noDeletePermission:`У вас нет разрешения удалять профили`,types:{filament:`Профиль филамента`,printer:`Профиль принтера`,process:`Профиль процесса`},toast:{deleted:`Профиль удалён`,created:`Профиль создан`,updated:`Профиль обновлён`,duplicated:`Копия профиля создана`,fieldAdded:`Добавлено поле «{{key}}»`,exported:`Профиль экспортирован`},baseLabel:`Базовый: {{name}}`,currentLabel:`Текущий: {{name}}`,newPreset:`Новый профиль`,editPreset:`Изменение профиля`,duplicatePreset:`Копирование профиля`,createNewPreset:`Создание профиля`,customizeSettings:`Настройте параметры нового профиля`,compareWithBase:`Сравнить с базовым профилем`,compare:`Сравнить`,basePreset:`Базовый профиль`,selectBasePreset:`Выберите базовый профиль...`,presetName:`Название профиля`,myCustomPreset:`Мой профиль`,inheritsFrom:`Наследует от`,dropJsonToImport:`Перетащите JSON для импорта`,tabs:{common:`Основные`,allFields:`Все поля`},availableFields:`Доступные поля`,searchFieldsPlaceholder:`Поиск полей...`,noMatchingFields:`Нет подходящих полей`,allFieldsAdded:`Все поля добавлены`,addCustomField:`Добавить произвольное поле`,yourOverrides:`Ваши переопределения`,noOverridesYet:`Переопределений пока нет`,clickFieldsToAdd:`Нажимайте поля слева, чтобы добавить их`,saveAsTemplate:`Сохранить как шаблон`,jsonTip:`Совет: перетащите файл .json в это окно, чтобы импортировать настройки`},cloudView:{searchPlaceholder:`Поиск профилей...`,templates:`Шаблоны`,refresh:`Обновить`,newPreset:`Новый профиль`,clearFilters:`Сбросить фильтры`,compareMode:`Режим сравнения`,selectAnotherPreset:`Выберите другой профиль типа «{{type}}»`,clickTwoPresets:`Выберите два профиля одного типа для сравнения`,selectFirst:`1. Выберите первый`,selectSecond:`2. Выберите второй`,compareNow:`Сравнить`,lastSynced:`Последняя синхронизация:`,showingCount:`Показано {{showing}} из {{total}} профилей`,noPresetsFound:`Профили не найдены`,columns:{filament:`Филамент`,process:`Процесс`,printer:`Принтер`},noFilamentPresets:`Нет профилей филамента`,noProcessPresets:`Нет профилей процесса`,noPrinterPresets:`Нет профилей принтера`,filters:{type:`Тип`,owner:`Владелец`,printer:`Принтер`,nozzle:`Сопло`,filament:`Филамент`,layer:`Слой`,all:`Все`,myPresets:`Мои профили`,builtIn:`Встроенные`,process:`Процесс`},noTemplatesPermission:`У вас нет разрешения управлять шаблонами`,noRefreshPermission:`У вас нет разрешения обновлять профили`,noCreatePermission:`У вас нет разрешения создавать профили`},templates:{title:`Быстрые шаблоны`,noTemplates:`Шаблонов пока нет`,createFirst:`Создавайте шаблоны в редакторе профилей`,typeFilter:`Тип:`,deleteTitle:`Удаление шаблона`,deleteWarning:`Это действие нельзя отменить`,deleteConfirm:`Удалить шаблон «{{name}}»?`,namePlaceholder:`Название шаблона`,descriptionPlaceholder:`Описание`,settingsJson:`Настройки (JSON)`,fieldsCount:`Полей: {{count}}`,shownInModals:`Показывается в окнах`,hiddenInModals:`Скрыт в окнах`,apply:`Применить`,toast:{deleted:`Шаблон удалён`,updated:`Шаблон обновлён`,created:`Шаблон создан`,applied:`Шаблон применён`}}},support:{debugLoggingActive:`Отладочное журналирование включено`,manageLogs:`Управление`,collectItem7:`Подключение принтеров и версии прошивок`,collectItem8:`Состояние интеграций (Spoolman, MQTT, HA)`,collectItem9:`Сетевые интерфейсы (только подсети)`,collectItem10:`Версии пакетов Python`,collectItem11:`Проверка состояния базы данных`,collectItem12:`Сведения о среде Docker`,bundleGenerating:`Формирование пакета...`,bundleStepConnection:`Проверка подключения принтеров`,bundleStepVirtualPrinters:`Проверка настройки виртуальных принтеров`,bundleStepLogScan:`Поиск известных проблем в последних журналах`,bundleStepBuild:`Создание ZIP-пакета для поддержки`},fileManager:{variants:{badge:`Версий: {{count}}`,groupAction:`Сгруппировать как версии`,groupTooltip:`Пометить эти файлы как одну задачу, нарезанную для разных принтеров`,grouped:`Файлов сгруппировано как версии: {{count}}`,printAlternatives:`Печать (вариантов: {{count}})`},title:`Файловый менеджер`,subtitle:`Организация и управление файлами для печати`,uploadFiles:`Загрузить файлы`,newFolder:`Новая папка`,folderName:`Имя папки`,folderNamePlaceholder:`например, Функциональные детали`,renameFile:`Переименовать файл`,renameFolder:`Переименовать папку`,invalidFilenameChar:`Символ «{{char}}» нельзя использовать в именах файлов печати. SD-карта принтера не принимает: < > : " / \\ | ? *`,moveFiles:`Переместить файлы ({{count}})`,rootNoFolder:`Корень (без папки)`,current:`текущая`,linkFolder:`Связать папку`,linkFolderDescription:`Связать «{{name}}» с проектом или архивом для быстрого доступа.`,project:`Проект`,archive:`Архив`,noProjectsFound:`Проекты не найдены`,noArchivesFound:`Архивы не найдены`,unlink:`Отвязать`,link:`Связать`,dragDropFiles:`Перетащите файлы сюда`,dropFilesHere:`Перетащите файлы сюда`,releaseToUpload:`Отпустите для загрузки`,orClickToBrowse:`или нажмите для выбора`,allFileTypesSupported:`Поддерживаются все типы файлов. ZIP-архивы будут распакованы.`,zipFilesDetected:`Обнаружены ZIP-архивы`,zipExtractOptions:`ZIP-архивы будут распакованы. Выберите способ обработки структуры папок:`,preserveZipStructure:`Сохранить структуру папок из ZIP`,createFolderFromZip:`Создать папку с именем ZIP-файла`,stlThumbnailGeneration:`Создание миниатюр STL`,zipMayContainStl:`ZIP-архивы могут содержать STL-файлы. Миниатюры можно создать при распаковке.`,thumbnailsCanBeGenerated:`Для STL-файлов можно создать миниатюры. Обработка крупных моделей может занять больше времени.`,generateThumbnailsForStl:`Создать миниатюры для STL-файлов`,threemfDetected:`Обнаружены файлы 3MF`,threemfExtractionInfo:`Модель принтера, материал, цвет и параметры печати будут автоматически извлечены из файлов 3MF.`,willBeExtracted:`Будут извлечены`,filesExtracted:`Извлечено файлов: {{count}}`,uploadComplete:`Загрузка завершена: успешно — {{succeeded}}`,uploadFailed:`Ошибка загрузки`,zipFilesFailed:`Не удалось обработать файлов: {{count}}`,uploading:`Загрузка...`,changeLink:`Изменить связь...`,linkTo:`Связать с...`,linkToProjectOrArchive:`Связать с проектом или архивом`,generateThumbnail:`Создать миниатюру`,generateThumbnails:`Создать миниатюры`,generateThumbnailsForMissing:`Создать отсутствующие миниатюры для STL-файлов`,gridView:`Плитка`,listView:`Список`,lowDiskSpaceWarning:`Мало свободного места`,lowDiskSpaceDetails:`Свободно только {{free}} из {{total}}. Порог предупреждения в настройках: {{threshold}} ГБ.`,files:`Файлы`,folders:`Папки`,size:`Размер`,free:`Свободно`,allFiles:`Все файлы`,allExternal:`Внешние`,externalIsEmpty:`Внешних файлов нет`,externalEmptyDescription:`Здесь появятся файлы из подключённых внешних папок.`,wrap:`Перенос строк`,enableTextWrapping:`Включить перенос строк`,disableTextWrapping:`Отключить перенос строк`,collapse:`Свернуть`,collapseFoldersByDefault:`Сворачивать папки по умолчанию`,expandFoldersByDefault:`Разворачивать папки по умолчанию`,folderSort:`Сортировка папок`,folderSortByName:`По имени`,folderSortByActivity:`По последней активности`,dragToResizeTooltip:`Перетащите для изменения размера, двойной щелчок — сброс`,searchFiles:`Поиск файлов...`,searchSubfoldersHint:`С учётом вложенных папок`,readme:{truncated:`Показано не полностью`,show:`Показать README`,hide:`Скрыть README`,label:`README`},tags:{title:`Метки`,subtitle:`Помечайте файлы для сквозной фильтрации: игрушки, безопасно для детей, только PETG и что угодно ещё.`,manage:`Метки`,manageTitle:`Управление каталогом меток`,add:`Новая метка`,edit:`Переименовать метку`,name:`Название`,fileCount:`Файлы`,empty:`Меток пока нет. Создайте первую, чтобы начать помечать файлы.`,noMatches:`Подходящие метки не найдены.`,createPlaceholder:`например, игрушки, детям, petg`,createButton:`Создать`,nameRequired:`Укажите название.`,searchPlaceholder:`Фильтр меток...`,created:`Метка создана.`,updated:`Метка переименована.`,deleted:`Метка удалена.`,saveFailed:`Не удалось сохранить метку.`,deleteFailed:`Не удалось удалить метку.`,applyFailed:`Не удалось применить метки.`,applyAdd:`Добавить метки`,applyRemove:`Удалить метки`,applyAddSuccess:`Добавлено меток: {{count}}; обработано файлов: {{files}}.`,applyRemoveSuccess:`Удалено меток: {{count}}; обработано файлов: {{files}}.`,actionAdd:`Добавить к выбранным файлам`,actionRemove:`Удалить с выбранных файлов`,tagAction:`Метки`,bulkTitle:`Метки для выбранных файлов ({{count}})`,bulkTooltip:`Добавить или удалить метки у всех выбранных файлов.`,noPermission:`У вас нет прав на изменение меток файлов.`,filterLabel:`Фильтр по меткам:`,clearAll:`Очистить всё`,confirmDelete:`Удалить метку «{{name}}»?`,confirmDeleteMessage:`Метка будет удалена из каталога. Остальные метки файлов сохранятся.`,confirmDeleteInUseMessage:`Эта метка назначена файлам ({{count}}). При удалении метка исчезнет у всех файлов; сами файлы не изменятся.`,editAria:`Изменить {{name}}`,deleteAria:`Удалить {{name}}`},allTypes:`Все типы`,prints:`Файлы печати`,ascending:`По возрастанию`,descending:`По убыванию`,showModified:`Показать даты изменения`,hideModified:`Скрыть даты изменения`,lastModified:`Изменено`,lastActivity:`Последняя активность`,resultsCount:`Показано {{showing}} из {{total}} файлов`,selectAll:`Выбрать всё`,deselectAll:`Снять выделение`,selected:`Выбрано: {{count}}`,adding:`Добавление...`,loadingFiles:`Загрузка файлов...`,folderIsEmpty:`Папка пуста`,noFilesYet:`Файлов пока нет`,folderEmptyDescription:`Загрузите или переместите файлы в эту папку.`,noFilesDescription:`Загрузите файлы, чтобы начать упорядочивать материалы для печати.`,noMatchingFiles:`Подходящие файлы не найдены`,noMatchingFilesDescription:`Нет файлов, соответствующих текущему поиску или фильтрам.`,clearFilters:`Сбросить фильтры`,printedCount:`Напечатано: {{count}}×`,uploadedBy:`Загрузил`,deleteFolder:`Удалить папку`,deleteFile:`Удалить файл`,deleteFilesCount:`Удалить файлы ({{count}})`,deleteFolderConfirm:`Удалить эту папку? Все находящиеся в ней файлы также будут удалены.`,deleteFileConfirm:`Удалить этот файл?`,deleteFilesConfirm:`Удалить выбранные файлы ({{count}})? Это действие нельзя отменить.`,deleting:`Удаление...`,noPermissionRenameFolder:`У вас нет прав на переименование папок`,noPermissionLinkFolder:`У вас нет прав на связывание папок`,noPermissionDeleteFolder:`У вас нет прав на удаление папок`,onlyEmptyFoldersDeletable:`Вы можете удалять только пустые папки`,noPermissionPrint:`У вас нет прав на запуск печати`,noPermissionAddToQueue:`У вас нет прав на добавление в очередь`,noPermissionSlice:`У вас нет прав на нарезку файлов`,noPermissionDownload:`У вас нет прав на скачивание файлов`,noPermissionPreview:`У вас нет прав на предварительный просмотр файлов`,preview3d:`3D-просмотр`,noPermissionRenameFile:`У вас нет прав на переименование этого файла`,noPermissionGenerateThumbnail:`У вас нет прав на создание миниатюр`,noPermissionDeleteFile:`У вас нет прав на удаление этого файла`,noPermissionCreateFolder:`У вас нет прав на создание папок`,noPermissionUpload:`У вас нет прав на загрузку файлов`,noPermissionMoveFiles:`У вас нет прав на перемещение файлов`,noPermissionDeleteFiles:`У вас нет прав на удаление файлов`,linkExternal:`Подключить внешнюю папку`,linkExternalFolder:`Подключить внешнюю папку`,linkExternalFolderDescription:`Подключить каталог хоста (NAS, USB-накопитель или сетевой ресурс) к файловому менеджеру. Файлы не копируются — Bambuddy обращается к ним по исходному пути.`,externalFolderNamePlaceholder:`например, Модели на NAS`,externalPath:`Путь на хосте`,externalPathHelp:`Абсолютный путь к каталогу на хосте Docker. Каталог должен быть подключён к контейнеру через bind mount.`,readOnly:`Только чтение`,readOnlyHelp:`запрещает загрузку и удаление файлов`,showHiddenFiles:`Показывать скрытые файлы (dotfiles)`,externalFolder:`Внешняя папка`,scanFolder:`Сканировать`,toast:{folderCreated:`Папка создана`,openInSlicerFailed:`Не удалось открыть в слайсере`,folderDeleted:`Папка удалена`,fileDeleted:`Файл удалён`,filesDeleted:`Удалено файлов: {{count}}`,filesMoved:`Файлы перемещены`,folderLinked:`Папка связана`,folderUnlinked:`Связь с папкой удалена`,externalFolderLinked:`Внешняя папка подключена и просканирована`,folderScanned:`Сканирование завершено: добавлено — {{added}}, удалено — {{removed}}`,addedToQueue:`Добавлено в очередь файлов: {{count}}`,addedToQueuePartial:`Добавлено файлов: {{added}}, ошибок: {{failed}}`,failedToAddToQueue:`Не удалось добавить файлы: {{error}}`,fileRenamed:`Файл переименован`,folderRenamed:`Папка переименована`,thumbnailsGenerated:`Создано миниатюр: {{count}}`,thumbnailsGeneratedPartial:`Создано миниатюр: {{succeeded}}, ошибок: {{failed}}`,noStlMissingThumbnails:`Нет STL-файлов без миниатюр`,failedToGenerateThumbnails:`Не удалось создать миниатюры: {{error}}`,thumbnailGenerated:`Миниатюра создана`,failedToGenerateThumbnail:`Не удалось создать миниатюру: {{error}}`}},projects:{parentLabel:`Родительский проект`,parentNone:`Нет (проект верхнего уровня)`,parentHint:`Вложите этот проект в другой, чтобы его показатели суммировались в главном проекте`,partOf:`Часть проекта {{name}}`,subProjectCount:`Подпроектов: {{count}}`,subProjectsOf:`Подпроекты проекта {{name}}`,collapseSubProjects:`Свернуть подпроекты`,expandSubProjects:`Развернуть подпроекты`,title:`Проекты`,subtitle:`Организация и отслеживание проектов 3D-печати`,newProject:`Новый проект`,editProject:`Изменить проект`,deleteProject:`Удалить проект`,projectName:`Название проекта`,description:`Описание`,noProjects:`Проектов пока нет`,noProjectsFiltered:`Нет проектов со статусом «{{status}}»`,noProjectsFilteredHelp:`У вас нет проектов со статусом «{{status}}». Они появятся здесь после изменения статуса.`,createFirst:`Создайте первый проект, чтобы объединять связанные печати, отслеживать ход работ и управлять сборкой.`,createFirstButton:`Создать первый проект`,create:`Создать`,files:`Файлы`,prints:`Печати`,plates:`пластин`,parts:`деталей`,lastModified:`Последнее изменение`,deleteConfirm:`Удалить этот проект? Архивные записи и элементы очереди будут отвязаны, но не удалены.`,addFiles:`Добавить файлы`,removeFile:`Убрать файл`,viewDetails:`Подробнее`,namePlaceholder:`например, Сборка Voron 2.4`,descriptionPlaceholder:`Необязательное описание...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URL должен начинаться с http:// или https://`,openExternalUrl:`Открыть страницу проекта`,coverImageLabel:`Обложка`,coverImageAlt:`Обложка проекта`,coverImageUpload:`Загрузить`,coverImageReplace:`Заменить`,coverImageRemove:`Удалить`,color:`Цвет`,targetPlates:`План по пластинам`,targetPlatesPlaceholder:`например, 25`,targetPlatesHelp:`Количество заданий печати`,targetParts:`План по деталям`,targetPartsPlaceholder:`например, 150`,targetPartsHelp:`Общее требуемое количество объектов`,targetSets:`Копий на файл`,targetSetsPlaceholder:`напр. 10`,targetSetsHelp:`Сколько раз нужно напечатать каждый печатаемый файл`,tagsLabel:`Метки (через запятую)`,tagsPlaceholder:`например, voron, функциональное, подарок`,dueDate:`Срок`,priority:`Приоритет`,priorityLow:`Низкий`,priorityNormal:`Обычный`,priorityHigh:`Высокий`,priorityUrgent:`Срочный`,statusActive:`Активный`,statusCompleted:`Завершён`,statusArchived:`В архиве`,done:`Готово`,completed:`завершено`,failed:`ошибка`,inQueue:`в очереди`,noPrintsYet:`Печатей пока нет`,printJobs:`Задания печати (пластины)`,partsPrinted:`Напечатано деталей`,failedParts:`Неудачных деталей`,import:`Импорт`,export:`Экспорт`,importProject:`Импортировать проект`,exportAll:`Экспортировать все проекты`,loading:`Загрузка проектов...`,noEditPermission:`У вас нет прав на изменение проектов`,noDeletePermission:`У вас нет прав на удаление проектов`,noCreatePermission:`У вас нет прав на создание проектов`,noImportPermission:`У вас нет прав на импорт проектов`,noExportPermission:`У вас нет прав на экспорт проектов`,toast:{created:`Проект создан`,updated:`Проект обновлён`,deleted:`Проект удалён`,imported:`Проект импортирован`,multipleImported:`Импортировано проектов: {{count}}`,importFailed:`Не удалось импортировать проект`,exported:`Проекты экспортированы (только метаданные)`}},projectDetail:{notFound:`Проект не найден`,backToProjects:`Вернуться к проектам`,export:`Экспорт`,exportProject:`Экспортировать проект`,noExportPermission:`У вас нет прав на экспорт проектов`,noEditPermission:`У вас нет прав на изменение проектов`,partOf:`Входит в:`,priorityLabel:`Приоритет:`,noPrints:`В этом проекте пока нет печатей`,status:{active:`Активный`,completed:`Завершён`,archived:`В архиве`},priority:{low:`Низкий`,normal:`Обычный`,high:`Высокий`,urgent:`Срочный`},dueDate:{overdue:`Срок истёк`,today:`Срок сегодня`,daysLeft:`Осталось дней: {{count}}`},progress:{platesProgress:`Выполнение по пластинам`,partsProgress:`Выполнение по деталям`,setsProgress:`Полные комплекты`,sets:`комплектов`,setsHint:`Комплект готов, когда каждый печатаемый файл достиг этого количества`,printJobs:`заданий печати`,parts:`деталей`,percentComplete:`Выполнено {{percent}}%`,remaining:`Осталось: {{count}}`},stats:{printJobs:`Задания печати`,total:`всего`,failed:`Неудачных: {{count}}`,partsPrinted:`Напечатано деталей: {{count}}`,printTime:`Время печати`,filamentUsed:`Израсходовано филамента`},cost:{title:`Учёт стоимости`,filamentCost:`Стоимость филамента`,energy:`Электроэнергия`,totalCost:`Общая стоимость`,total:`Итого`,includesBom:`включая спецификацию`,budget:`Бюджет`,remaining:`Остаток`},subProjects:{title:`Подпроекты ({{count}})`,jobs:`Заданий: {{count}}`},rollup:{title:`Включая подпроекты: {{count}}`,progress:`Общий прогресс`,percentComplete:`Завершено {{percent}}%`},notes:{title:`Заметки`,noEditPermission:`У вас нет прав на изменение заметок`,placeholder:`Добавьте заметки о проекте...`,empty:`Заметок пока нет. Нажмите «Изменить», чтобы добавить.`},files:{title:`Файлы`,linkFolders:`Свяжите папки из файлового менеджера`,forQuickAccess:`с этим проектом для быстрого доступа.`,fileCount:`Файлов: {{count}}`,empty:`Связанных папок нет. Откройте файловый менеджер и свяжите папку с проектом.`,printedCount:`Напечатано {{count}} раз`,progressTooltip:`{{done}} из {{target}} завершённых печатей`,noFiles:`В этой папке нет файлов.`},bom:{title:`Спецификация`,acquired:`Приобретено: {{completed}}/{{total}}`,showAll:`Показать всё`,hideDone:`Скрыть готовое`,addPart:`Добавить позицию`,noAddPermission:`У вас нет прав на добавление позиций`,partNamePlaceholder:`Название позиции (например, винты M3×8)`,partName:`Название позиции`,qty:`Кол-во`,price:`Цена ({{currency}})`,sourcingUrlPlaceholder:`Ссылка на поставщика (необязательно)`,remarksPlaceholder:`Примечание (необязательно)`,deletePart:`Удалить позицию`,deleteConfirm:`Удалить «{{name}}»?`,noUpdatePermission:`У вас нет прав на обновление позиций`,noEditPermission:`У вас нет прав на изменение позиций`,noDeletePermission:`У вас нет прав на удаление позиций`,totalCost:`Общая стоимость:`,empty:`В спецификации пока нет позиций. Добавьте крепёж, электронику и другие компоненты, закупку которых нужно отслеживать.`},timeline:{title:`Хронология активности`,empty:`Активности пока нет.`},template:{saveAsTemplate:`Сохранить как шаблон`,noCreatePermission:`У вас нет прав на создание шаблонов`},queue:{title:`Очередь`,viewAll:`Показать всё`,printing:`Печатается: {{count}}`,queued:`В очереди: {{count}}`},prints:{title:`Печати ({{count}})`},toast:{projectUpdated:`Проект обновлён`,partAdded:`Позиция добавлена`,partRemoved:`Позиция удалена`,exportFailed:`Не удалось экспортировать`,projectExported:`Проект экспортирован`,templateCreated:`Шаблон создан`}},system:{title:`Информация о системе`,version:`Версия`,uptime:`Время работы`,cpuUsage:`Загрузка процессора`,memoryUsage:`Использование памяти`,diskUsage:`Использование диска`,networkInfo:`Сетевая информация`,logs:`Журналы`,debugMode:`Режим отладки`,enableDebug:`Включить журналирование отладки`,disableDebug:`Отключить журналирование отладки`,downloadLogs:`Скачать журналы`,clearLogs:`Очистить журналы`,dockerInfo:`Информация о Docker`,containerName:`Имя контейнера`,imageName:`Имя образа`,platform:`Платформа`,architecture:`Архитектура`},sponsors:{sectionTitle:`Независимый проект на поддержке сообщества`,tagline:`Bambuddy бесплатен и остаётся таким благодаря добровольной поддержке пользователей. Без венчурного капитала и привязки к облаку.`,viewSupporters:`Посмотреть сторонников проекта`,toastPrints:`С Bambuddy выполнено печатей: {{count}}. Проект остаётся бесплатным благодаря поддержке сообщества.`,toastCost:`С помощью Bambuddy учтено филамента на сумму {{total}}. Посмотрите, кто помогает проекту оставаться независимым.`,toastArchives:`С Bambuddy архивировано печатей: {{count}}. Посмотрите, кто помогает проекту оставаться независимым.`,toastAnniversary:`Вы уже год с Bambuddy! Посмотрите, кто помогает проекту оставаться независимым.`,toastVersionUpdate:`Обновлено до версии {{version}}. Bambuddy остаётся бесплатным благодаря поддержке сообщества.`,toastBusiness:`Используете Bambuddy для {{count}} принтеров? Для команд доступен план поддержки с приоритетным исправлением ошибок, выставлением счетов и прямой связью с разработчиком.`,businessCta:`Bambuddy для бизнеса`,businessTitle:`Bambuddy для бизнеса`,businessTagline:`Вы используете {{count}} принтеров. Для команд и печатных ферм доступны приоритетная поддержка, коммерческая лицензия и выставление счетов.`},library:{title:`Библиотека филаментов`,addFilament:`Добавить филамент`,editFilament:`Изменить филамент`,deleteFilament:`Удалить филамент`,vendor:`Производитель`,material:`Материал`,color:`Цвет`,kFactor:`Коэффициент K`,temperature:`Температура`,noFilaments:`В библиотеке нет филаментов`,deleteConfirm:`Удалить этот филамент?`,importFromPrinter:`Импортировать с принтера`,exportToFile:`Экспортировать в файл`,runWithPipeline:{actionLabel:`Запустить через конвейер`,noPermission:`У вас нет прав на запуск конвейеров`,modalTitle:`Запуск через конвейер`,confirmTitle:`Подтверждение запуска`,confirmIntro:`Предварительная проверка обнаружила проблемы`,sourceHint:`Источник`,pipelineHint:`Конвейер`,targetHint:`Назначение`,pipelineListAria:`Доступные конвейеры`,runAnyway:`Всё равно запустить`,loading:`Загрузка…`,empty:`Сохранённых конвейеров пока нет. Откройте диалог нарезки и нажмите «Сохранить как конвейер».`,noTarget:`Целевой принтер не задан`,noTargetMessage:`Для этого конвейера не задан целевой принтер. Откройте его в настройках и выберите принтер.`,copies:`Копии`,copiesHint:`макс. {{n}}`,classTarget:`Любой {{model}}`,toast:{started:`Конвейер запущен`,failed:`Не удалось запустить конвейер`},issue:{printerNotSet:`Для этого конвейера не задан целевой принтер.`,printerNotFound:`Целевой принтер больше не существует.`,printerDisabled:`Целевой принтер отключён.`,printerOffline:`Целевой принтер не в сети.`,filamentType:`Слот филамента {{slot}}: ожидается {{expected}}, в AMS установлен {{actual}}`,filamentColor:`Слот филамента {{slot}}: цвет отличается (ожидается {{expected}}, в AMS установлен {{actual}})`,amsSlotMissing:`Слот AMS {{slot}} недоступен на этом принтере`,filamentUnverified:`Филамент в слоте {{slot}} выбран из облачного или стандартного профиля и не может быть проверен заранее.`,noClassMatches:`Ни один принтер в этой установке не соответствует целевому классу модели конвейера ({{expected}}).`,classNotSet:`В качестве цели конвейера выбран класс принтера, но модель не указана.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Показаны значения по умолчанию слайсера: ваш sidecar старше этой функции и не может сообщить значения профиля. Обновите образ sidecar, чтобы увидеть их. Всё, что вы не измените, по-прежнему берётся из профиля.`,presetValuesNotConfigured:`Показаны значения по умолчанию слайсера: sidecar не настроен, поэтому значения профиля прочитать нельзя. Всё, что вы не измените, по-прежнему берётся из профиля.`,presetValuesSidecarUnavailable:`Показаны значения по умолчанию слайсера: sidecar не ответил, поэтому значения профиля прочитать нельзя. Всё, что вы не измените, по-прежнему берётся из профиля.`,presetValuesUnavailable:`Показаны значения по умолчанию слайсера: значения выбранного профиля прочитать не удалось. Всё, что вы не измените, по-прежнему берётся из профиля.`,filamentDefault:`По умолчанию`,fromFile:`из файла`,fromFileHint:`Автор модели изменил этот параметр в исходном файле. Значение: {{value}}.`,fromFilePrinterCoupled:`принтер автора`,fromFilePrinterCoupledHint:`Подобрано под принтер, для которого создан файл, — на вашем значение может быть неверным или вне диапазона.`,fromFileOverridesPreset:`переопределяет пресет`,fromFileOverridesPresetHint:`В файле задано {{value}}, а выбранный пресет использует {{preset}}. Отмечайте, только если приоритет должен быть у файла.`,useFromFile:`Использовать значение из исходного файла для «{{option}}»`,otherFromFile:`Другие параметры из этого файла`,fromFileSummary:`Дизайнер изменил в этом файле {{count}} параметров процесса. Применяются только отмеченные.`,fromFileUseAll:`Использовать настройки дизайнера`,fromFileUseAllHint:`Отмечает параметры, которые переносятся на другие принтеры. Подогнанные под принтер дизайнера и задающие выбранный пресет остаются выключенными.`,fromFileClear:`Снять {{count}}`,loading:`Загрузка настроек слайсера…`,mode:{simple:`Простой`,advanced:`Расширенный`,expert:`Эксперт`},searchPlaceholder:`Поиск параметров`,resetAll:`Сбросить: {{count}}`,resetOption:`Сбросить к значению по умолчанию`,noMatches:`Нет параметров, соответствующих запросу.`},slice:{filamentSlotUnset:`не задано`,processSettingsEmbedded:`Не используется, пока включено «Использовать встроенные настройки файла» — нарезкой управляют настройки самого файла.`,processSettingsInactive:`Не активно`,presetsHidden:`скрыто: {{count}}`,showAllPresets:`Показать все`,showFewerPresets:`Показать меньше`,processSettings:`Параметры процесса`,processSettingsHint:`Настройте выбранный профиль для этой нарезки. Всё, что вы не измените, останется как задано в профиле.`,processSettingsChanged:`изменено: {{count}}`,processSettingsUnchanged:`Значения профиля`,title:`Нарезка модели`,action:`Нарезать`,actionAll:`Нарезать все пластины ({{count}})`,actionAllTitle:`Нарезать все пластины в один многостольный результат и сохранить в одном архиве. Выбор филаментов охватывает все слоты, используемые проектом.`,allPlatesToggle:`Нарезать все пластины ({{count}})`,slicing:`Нарезка…`,printer:`Профиль принтера`,process:`Профиль процесса`,filament:`Профиль филамента`,filamentSlot:`Филамент {{index}} ({{type}})`,filamentColour:`Цвет филамента`,selectPreset:`— Выберите профиль —`,loadingPresets:`Загрузка профилей…`,analyzingPlateFilaments:`Анализ филаментов пластины…`,analyzingPlateFilamentsHint:`Выполняется предварительная нарезка, чтобы определить, какие слоты AMS используются на этой пластине. Результат кэшируется, поэтому повторное открытие будет мгновенным.`,previewToast:`Анализ {{name}} — {{elapsed}}`,previewWithProgress:`Анализ {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— не используется на этой пластине`,noPresetsForSlot:`Нет доступных профилей`,otherPrinters:`Другие принтеры`,presetsLoadFailed:`Не удалось загрузить профили. Сначала импортируйте их в разделе «Настройки → Профили».`,refreshPresets:`Обновить`,refreshPresetsTitle:`Обновить профили — получить свежие облачные и встроенные списки. Используйте после удаления профиля в Bambu Studio или Bambu Handy.`,allPresetsRequired:`Необходимо выбрать все профили`,useEmbedded:`Использовать встроенные настройки файла`,useEmbeddedHint:`Нарезать так, как задумал автор модели (стенки, заполнение, филамент), вместо профилей выше. Доступно, потому что ваш принтер совпадает с указанным в файле.`,autoOrient:`Автоматически ориентировать объекты`,autoOrientHint:`Слайсер повернёт каждый объект на сторону, которая печатается лучше всего. Ориентация из файла будет заменена.`,autoArrange:`Автоматически разместить на столе`,autoArrangeHint:`Слайсер расставит объекты так, чтобы они не перекрывались. Расположение из файла будет заменено.`,enqueuing:`Отправка задания на нарезку…`,queued:`В очереди…`,failed:`Ошибка нарезки. Проверьте журналы вспомогательного сервиса слайсера.`,startedToast:`Фоновая нарезка {{name}}…`,queuedToast:`В очереди: {{name}} — {{elapsed}}`,runningToast:`Нарезка {{name}} — {{elapsed}}`,runningWithProgress:`{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,runningWithProgressMultiPlate:`Пластина {{plateIndex}} из {{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,completedToast:`Нарезка {{name}} завершена`,externalWriteFallbackToast:`Сохранено во внутренней библиотеке: не удалось записать во внешнюю папку`,failedTitle:`Ошибка нарезки`,failedToast:`Не удалось нарезать {{name}}: {{detail}}`,tier:{local:`Импортированные`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Стандартные`},cloud:{notAuthenticated:`Войдите в Bambu Cloud («Настройки → Профили → Bambu Cloud»), чтобы увидеть облачные профили.`,expired:`Сессия Bambu Cloud истекла. Войдите снова, чтобы обновить облачные профили.`,unreachable:`Bambu Cloud сейчас недоступен. Локальные и стандартные профили продолжат работать.`},orcaCloud:{notAuthenticated:`Войдите в Orca Cloud («Профили → Orca Cloud»), чтобы увидеть профили Orca.`,expired:`Сессия Orca Cloud истекла. Войдите снова, чтобы обновить профили Orca.`,unreachable:`Orca Cloud сейчас недоступен. Остальные профили продолжат работать.`},bedType:{label:`Печатная пластина`,auto:`Авто (из профиля процесса)`,coolPlate:`Холодная пластина`,coolPlateSuperTack:`Холодная пластина SuperTack`,engineering:`Инженерная пластина`,highTemp:`Высокотемпературная пластина`,texturedPEI:`Текстурированная PEI-пластина`,smoothPEI:`Гладкая PEI-пластина`},pipelines:{label:`Конвейер`,applyAria:`Применить конвейер`,applyPrompt:`Применить конвейер…`,empty:`Нет сохранённых конвейеров`,saveButton:`Сохранить как конвейер`,saveTitle:`Сохранить текущий набор из четырёх профилей как повторно используемый конвейер`,namePlaceholder:`Название конвейера`,nameAria:`Название нового конвейера`,toast:{applied:`Применён конвейер «{{name}}»`,saved:`Конвейер сохранён`,saveFailed:`Не удалось сохранить`}}},spoolman:{title:`Интеграция со Spoolman`,enabled:`Spoolman включён`,url:`URL Spoolman`,connected:`Подключено`,disconnected:`Нет подключения`,testConnection:`Проверить подключение`,sync:`Синхронизировать`,syncing:`Синхронизация…`,lastSync:`Последняя синхронизация`,linkToSpoolman:`Связать со Spoolman`,openInSpoolman:`Открыть в Spoolman`,unlinkSpool:`Отвязать катушку`,unlinkConfirmTitle:`Снять назначение катушки?`,unlinkConfirmMessage:`Катушка будет удалена из этого слота. Данные самой катушки останутся без изменений.`,selectSpool:`Выбрать катушку`,noUnlinkedSpools:`Нет свободных катушек`,linkSuccess:`Катушка успешно назначена`,linkFailed:`Не удалось назначить катушку`,unlinkSuccess:`Назначение катушки снято`,unlinkFailed:`Не удалось снять назначение катушки`,linkedSpool:`Назначенная катушка`,spoolId:`ID катушки`,fillSourceLabel:`(Spoolman)`,weight:`Масса`,remaining:`Остаток`,disableWeightSync:`Отключить синхронизацию расчётной массы AMS`,disableWeightSyncDesc:`Не обновлять остаток по оценке AMS. Используйте это, если предпочитаете учёт расхода Spoolman процентной оценке AMS. Для новых катушек оценка AMS всё равно будет использована как начальная масса.`,reportPartialUsage:`Учитывать частичный расход при неудачной печати`,reportPartialUsageDesc:`Если печать завершилась ошибкой или была отменена, учитывать примерный расход филамента до этого момента по прогрессу слоёв.`},locations:{title:`Места хранения`,subtitle:`Управление полками, ящиками и другими физическими местами хранения катушек`,add:`Добавить место`,addShort:`Добавить`,edit:`Изменить место`,name:`Название`,spools:`Катушки`,sensors:`Датчики`,empty:`Мест хранения пока нет. Создайте первую полку или ящик.`,manage:`Места хранения`,createPlaceholder:`например, Полка A или Ящик 1`,nameRequired:`Укажите название места хранения`,created:`Место хранения создано`,updated:`Место хранения обновлено`,deleted:`Место хранения удалено`,saveFailed:`Не удалось сохранить место хранения`,deleteFailed:`Не удалось удалить место хранения`,deleteBlocked:`Перед удалением переместите из этого места все катушки`,confirmDelete:`Удалить «{{name}}»?`,confirmDeleteMessage:`Это место будет удалено из каталога. Сначала необходимо переместить все катушки.`,confirmDeleteMessageWithSensors:`Это место будет удалено из каталога. Сначала необходимо переместить все катушки. Подключённые датчики также будут удалены.`},inventory:{title:`Учёт катушек`,subtitle:`Управление катушками`,addToInventory:`Добавить в учёт`,addToInventoryPending:`Добавление…`,addToInventorySuccess:`Катушка добавлена в учёт`,addToInventoryFailed:`Не удалось добавить катушку в учёт`,unknownSpoolTitle:`Обнаружен новый филамент`,unknownSpoolMessage:`В {{location}} обнаружена катушка с неизвестной RFID-меткой. Добавить её в учёт?`,unknownSpoolSlot:`Слот`,bulk:{selectAllVisible:`Выбрать все видимые`,selectRow:`Выбрать строку`,selectGroup:`Выбрать группу`,selectionCount:`Выбрано: {{count}}`,edit:`Изменить`,printLabels:`Печать этикеток`,resetUsage:`Сбросить расход`,restore:`Восстановить`,archive:`Архивировать`,delete:`Удалить`,clearSelection:`Снять выделение`,editTitle:`Массовое изменение катушек`,editSubtitle:`Изменения применятся к {{count}} выбранным катушкам. Обновятся только отмеченные поля.`,editHint:`Введите значение в поле, чтобы включить его обновление. Будут отправлены только отмеченные строки. Пустое поле не изменяет катушки; очистить значение можно только при редактировании отдельной катушки.`,useCustom:`Использовать «{{value}}»`,toggleField:`Включить или отключить обновление этого поля`,changeCount:`Будет обновлено полей: {{count}}.`,applyPending:`Применение…`,applyButton:`Применить к {{count}} катушкам`,deleteTitle:`Удалить выбранные катушки`,archiveTitle:`Архивировать выбранные катушки`,restoreTitle:`Восстановить выбранные катушки`,resetUsageTitle:`Сбросить расход выбранных катушек`,deleteMessage:`Безвозвратно удалить {{count}} катушек? Это действие нельзя отменить.`,archiveMessage:`Архивировать {{count}} катушек? Позже их можно будет восстановить.`,restoreMessage:`Восстановить {{count}} архивных катушек?`,resetUsageMessage:`Сбросить счётчик «Израсходовано всего» у {{count}} катушек? Текущий остаток массы сохранится.`,updateSuccess:`Обновлено катушек: {{count}}`,updateFailed:`Ошибка массового обновления`,updatePartial:`Обновлено: {{ok}}, с ошибкой: {{failed}}`,updateAllFailed:`Не удалось обновить все {{count}} катушек. Выделение сохранено для повторной попытки.`,deleteSuccess:`Удалено катушек: {{count}}`,deleteFailed:`Ошибка массового удаления`,deletePartial:`Удалено: {{ok}}, с ошибкой: {{failed}}`,deleteAllFailed:`Не удалось удалить все {{count}} катушек. Выделение сохранено для повторной попытки.`,archiveSuccess:`Архивировано катушек: {{count}}`,archiveFailed:`Ошибка массового архивирования`,archivePartial:`Архивировано: {{ok}}, с ошибкой: {{failed}}`,archiveAllFailed:`Не удалось архивировать все {{count}} катушек. Выделение сохранено для повторной попытки.`,restoreSuccess:`Восстановлено катушек: {{count}}`,restoreFailed:`Ошибка массового восстановления`,restorePartial:`Восстановлено: {{ok}}, с ошибкой: {{failed}}`,restoreAllFailed:`Не удалось восстановить все {{count}} катушек. Выделение сохранено для повторной попытки.`,invalidHex:`Введите 6 шестнадцатеричных символов (RRGGBB) или 8 (RRGGBBAA), иначе поле не будет применено.`},spoolmanMixedContentTitle:`Spoolman не загружается через HTTPS: браузер заблокировал смешанное содержимое`,spoolmanMixedContentBody:`Bambuddy открыт через HTTPS (через обратный прокси), а URL Spoolman всё ещё использует обычный HTTP. Браузер блокирует такое смешанное содержимое, поэтому встроенный интерфейс Spoolman не отображается. Для работы Spoolman должен быть доступен по HTTPS.`,spoolmanMixedContentFixReverseProxy:`Разместите Spoolman за тем же обратным прокси, что и Bambuddy (Traefik / Nginx / Caddy), включите HTTPS и укажите новый HTTPS-адрес Spoolman в настройках.`,spoolmanMixedContentFixOpenNewTab:`В качестве обходного решения откройте Spoolman по HTTP в новой вкладке. Ограничение смешанного содержимого действует только для встроенных фреймов.`,spoolmanOpenInNewTab:`Открыть Spoolman в новой вкладке`,labels:{title:`Печать этикеток катушек`,selectedCount:`Выбрано: {{count}}`,pickSpools:`Выберите катушки для печати этикеток:`,monochrome:`Монохромный режим (чёрно-белый принтер)`,monochromeHint:`Убирает образец цвета и расширяет область текста`,startingPosition:`Начальная позиция этикетки`,startingPositionRange:`Только для листовых шаблонов: L7160 — 1–21; 5160 — 1–30.`,startingPositionInvalid:`Введите целое число от 1 до {{capacity}}.`,startingPositionFirst:`Печать начинается с позиции 1.`,startingPositionSkipped:`Позиции с 1 по {{lastPosition}} останутся пустыми на первом листе.`,startingPositionRangeError:`Начальная позиция для этого листа должна быть от 1 до {{capacity}}.`,searchPlaceholder:`Поиск по названию, бренду или #ID`,filterByMaterial:`Материал:`,allMaterials:`Все`,selectVisible:`Выбрать все видимые ({{count}})`,deselectVisible:`Снять выделение с видимых`,clearAll:`Очистить выбор`,noSpoolsToShow:`Нет катушек для отображения. Измените фильтр и повторите попытку.`,noMatches:`Нет катушек, соответствующих поиску или фильтру.`,printOne:`Напечатать этикетку этой катушки`,printLabels:`Печать этикеток…`,bulkTitle:`Выберите катушки для печати этикеток из {{count}} отображаемых`,noSpoolsTitle:`Нет катушек для печати этикеток`,error:`Не удалось создать этикетки: {{msg}}`,sortBy:{label:`Сортировка:`,id:`По ID`,color:`По цвету`},templates:{amsHolderSmall:{label:`Держатель AMS — малый (74 × 33 мм)`,hint:`Одна этикетка на страницу; соответствует печатной этикетке для модели MakerWorld 752566 (AMS Filament Label Holder).`},amsHolderLarge:{label:`Держатель AMS — большой (75 × 55 мм)`,hint:`Одна этикетка на страницу; подходит для варианта держателя AMS с картонной вставкой. Достаточно места для образца цвета, бренда, материала, ID и QR-кода.`},box40x30:{label:`Этикетка для коробки (40 × 30 мм)`,hint:`Одна этикетка на страницу; распространённый размер рулона DK/Brother, подходит для пакетов с филаментом и контейнеров хранения.`},box:{label:`Этикетка для коробки (62 × 29 мм)`,hint:`Одна этикетка на страницу; размер для малых этикеток Brother PT/QL и Dymo.`},averyL7160:{label:`Avery L7160 — лист A4 (38,1 × 63,5 мм × 21)`,hint:`Европейский формат: 21 этикетка на листе A4.`},avery5160:{label:`Avery 5160 — лист US Letter (25,4 × 66,7 мм × 30)`,hint:`Американский формат: 30 этикеток на листе Letter.`}}},csv:{importButton:`Импорт CSV`,exportButton:`Экспорт CSV`,modalTitle:`Импорт катушек из CSV`,selectFile:`Выберите CSV-файл или перетащите его сюда`,dragHint:`Заголовок: material (обязательно), brand, subtype, color_name, rgba, …`,parsing:`Чтение файла…`,previewError:`Не удалось прочитать CSV-файл`,validCount:`Корректных: {{count}}`,errorCount:`Ошибок: {{count}}`,skippedCount:`Пропущено: {{count}}`,colRow:`Строка`,colStatus:`Состояние`,colColor:`Цвет`,colorResolved:`Цвет подставлен из каталога`,colorCrossMaterial:`Цвет взят у другого материала: точного совпадения в каталоге нет`,duplicateExisting:`Катушка с таким материалом, брендом и цветом уже существует, но запись всё равно будет импортирована как новая катушка`,spoolmanHint:`В режиме Spoolman используйте встроенный импорт и экспорт CSV в Spoolman.`,importValidRows:`Импортировать {{count}} корректных строк`,noValidRows:`Нет корректных строк`,importing:`Импорт…`,importSuccess:`Импортировано катушек: {{count}}`,importError:`Ошибка импорта`,exportError:`Ошибка экспорта`},addSpool:`Добавить катушку`,editSpool:`Изменить катушку`,copySpool:`Копировать катушку`,material:`Материал`,selectMaterial:`Выберите материал…`,subtype:`Подтип`,brand:`Бренд`,searchBrand:`Поиск бренда…`,useCustomBrand:`Использовать «{{brand}}»`,useCustomMaterial:`Использовать свой материал: {{material}}`,suggestedOptions:`Рекомендуемые`,allOptions:`Все`,colorName:`Название цвета`,colorNamePlaceholder:`Jade White, Fire Red…`,color:`Цвет`,hexColor:`Цвет HEX`,pickColor:`Выбрать свой цвет`,labelWeight:`Номинальная масса`,coreWeight:`Масса пустой катушки`,searchSpoolWeight:`Поиск массы катушки…`,weightUsed:`Израсходовано`,currentWeight:`Остаток массы`,measuredWeight:`Измеренная масса`,spoolName:`Катушка`,costPerKg:`Стоимость за кг`,storageLocation:`Место хранения`,temperature:`Температура`,humidity:`Влажность`,battery:`Батарея`,storageLocationPlaceholder:`например, Полка A, Ящик 1`,openInInventory:`Открыть в учёте`,measuredWeightError:`Измеренная масса должна быть от {{min}} до {{max}} г.`,slicerFilament:`Филамент слайсера`,slicerFilamentName:`Название пресета слайсера`,slicerPreset:`Пресет слайсера`,searchPresets:`Поиск пресетов филамента…`,selectedPreset:`Выбрано`,noPresetsFound:`Пресеты не найдены`,tempOverrides:`Переопределение температур`,note:`Примечание`,notePlaceholder:`Дополнительные сведения об этой катушке…`,category:`Категория`,categoryPlaceholder:`например, Производство, Прототип, Клиент A`,categoryNone:`Без категории`,storageLocationNone:`Место не указано`,lowStockThresholdOverride:`Порог малого остатка (эта катушка)`,lowStockThresholdOverrideHelp:`Оставьте пустым, чтобы использовать общий порог ({{global}}%).`,clearRfid:`Очистить RFID-метку`,rfidCleared:`RFID-метка очищена`,archive:`Архивировать`,restore:`Восстановить`,noSpools:`Катушек пока нет. Добавьте первую катушку.`,noAvailableSpools:`Нет доступных катушек. Добавьте катушку в учёт или сначала освободите её в другом слоте.`,kProfiles:`K-профили`,addKProfile:`Добавить K-профиль`,assignSpool:`Назначить катушку`,unassignSpool:`Снять назначение`,assignSuccess:`Катушка назначена, слот AMS настроен`,assignPendingInsert:`Катушка назначена. Слот будет настроен после её установки.`,assignFailed:`Не удалось назначить катушку`,selectSpool:`Выберите катушку для назначения этому слоту`,assigned:`Назначено`,assigning:`Назначение…`,searchSpools:`Поиск катушек…`,showAllSpools:`Показать все катушки`,spoolmanSpools:`Катушки Spoolman`,allMaterials:`Все материалы`,filterByBrand:`Фильтр по бренду…`,showArchived:`Показывать архивные`,quickAdd:`Быстрое добавление`,quantity:`Количество`,stock:`На складе`,configured:`Настроено`,spoolsCreated:`Создано катушек: {{count}}`,spoolsPartiallyCreated:`Создано {{created}} из {{total}} катушек; часть операций завершилась ошибкой`,spoolCreated:`Катушка создана`,spoolUpdated:`Катушка обновлена`,spoolDeleted:`Катушка удалена`,deepLinkSpoolNotFound:`Катушка не найдена`,deepLinkFetchFailed:`Не удалось загрузить катушку. Повторите попытку.`,spoolArchived:`Катушка архивирована`,spoolRestored:`Катушка восстановлена`,kProfileSaveFailed:`Не удалось сохранить настройки K-профиля`,syncWeightSpoolNotFound:`Катушка не найдена: возможно, она была удалена`,syncWeightSpoolmanUnreachable:`Spoolman недоступен. Повторите попытку позже.`,syncWeightFailed:`Не удалось синхронизировать массу`,spoolmanUnreachable:`Spoolman недоступен. Повторите попытку позже.`,deleteSpoolNotFound:`Катушка не найдена: возможно, она уже удалена`,deleteFailed:`Не удалось удалить катушку`,archiveSpoolNotFound:`Катушка не найдена: возможно, она уже удалена`,archiveFailed:`Не удалось архивировать катушку`,restoreSpoolNotFound:`Катушка не найдена: возможно, она уже удалена`,restoreFailed:`Не удалось восстановить катушку`,saveFailed:`Не удалось сохранить изменения`,tagClearFailed:`Не удалось очистить метку`,deleteConfirm:`Удалить эту катушку без возможности восстановления?`,archiveConfirm:`Архивировать эту катушку?`,advancedSettings:`Расширенные настройки`,filamentInfoTab:`Сведения о филаменте`,paProfileTab:`Профиль PA`,colorAndCostTab:`Цвет и стоимость`,printersTab:`Принтеры`,filamentInfo:`Филамент`,additional:`Дополнительно`,loadingPresets:`Загрузка облачных пресетов…`,cloudConnected:`Облако подключено`,cloudNotConnected:`Облако не подключено; используются значения по умолчанию`,recentColors:`Недавние`,searchColors:`Поиск цветов…`,searchResults:`Результаты поиска`,allColors:`Все цвета`,commonColors:`Основные цвета`,showLess:`Показать меньше`,showAll:`Показать все`,noColorsFound:`Нет цветов, соответствующих запросу`,noResults:`Совпадений не найдено`,extraColorsLabel:`Дополнительные цвета`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Вставьте от 2 до 8 HEX-цветов через запятую. Они будут отображены как градиент.`,extraColorsInvalid:`Пропущены некорректные HEX-значения: {{tokens}}`,colorEffectLabel:`Эффект`,colorEffect:{none:`Нет`,sparkle:`Блёстки`,wood:`Дерево`,marble:`Мрамор`,glow:`Свечение`,matte:`Матовый`,silk:`Шёлк`,galaxy:`Галактика`,rainbow:`Радуга`,metal:`Металл`,translucent:`Полупрозрачный`,gradient:`Градиент`,dualColor:`Двухцветный`,triColor:`Трёхцветный`,multicolor:`Многоцветный`},selectMaterialFirst:`Сначала выберите материал на вкладке «Сведения о филаменте».`,noPrintersConfigured:`Принтеры не настроены. Добавьте принтеры, чтобы использовать профили PA.`,matchingFilter:`Совпадающие`,anyBrand:`Любой бренд`,anyVariant:`Любой вариант`,autoSelect:`Автовыбор`,matches:`совпадений`,match:`совпадение`,noMatches:`Нет совпадений`,connected:`Подключён`,offline:`Не в сети`,printerOffline:`Принтер не в сети. Подключите его для просмотра калибровочных профилей.`,noKProfilesMatch:`Нет K-профилей, соответствующих выбранному филаменту.`,leftNozzle:`Левое сопло`,rightNozzle:`Правое сопло`,profilesSelected:`выбрано калибровочных профилей`,filamentPreset:`Пресет филамента`,presetUseSpoolDefault:`Использовать пресет катушки`,presetInherited:`наследуется`,presetOverride:`переопределён`,presetNeedsModel:`Этот принтер ещё не сообщил свою модель, поэтому у него не может быть собственного пресета.`,autoMatchPresets:`Подобрать автоматически`,autoMatchPresetsHint:`Найти вариант пресета катушки, в названии которого указана каждая модель`,kProfilesPerPrinter:`K-профили`,kProfileNotSet:`Не задан`,kProfileFlowMismatch:`Этот профиль измерен на сопле {{profile}}, но установлено сопло {{fitted}}, поэтому он не будет применён`,nozzle:`Сопло`,unknownModel:`Неизвестная модель`,onePrinter:`1 принтер`,nPrinters:`Принтеров: {{n}}`,filamentPresetsLoadFailed:`Не удалось загрузить пресеты по моделям для этой катушки`,filamentPresetSaveFailed:`Не удалось сохранить пресеты по моделям`,totalInventory:`Всего в учёте`,totalConsumed:`Израсходовано всего`,byMaterial:`По материалам`,inPrinter:`В принтерах`,lowStock:`Малый остаток`,sinceTracking:`С начала учёта`,resetConsumedCounter:`Сбросить счётчик`,resetConsumedCounterTooltip:`Обнулить счётчик израсходованных граммов для этой катушки. Остаток массы не изменится.`,resetConsumedCounterConfirm:`Сбросить счётчик расхода этой катушки до 0? Последующие печати будут учитываться заново. Сама катушка, расчёт остатка и настройки не изменятся.`,resetAllConsumedCounters:`Сбросить все счётчики`,resetAllConsumedCountersTooltip:`Обнулить счётчик израсходованных граммов у всех катушек. Остатки массы не изменятся.`,resetAllConsumedCountersConfirm:`Сбросить счётчик расхода до 0 у всех {{count}} катушек, включая архивные? Показатель «Израсходовано всего» будет очищен, а будущие печати начнут учитываться с нуля. Катушки и их остатки не изменятся.`,consumedCounterReset:`Счётчик сброшен`,allConsumedCountersReset:`Счётчик сброшен у {{count}} катушек`,resetConsumedCounterFailed:`Не удалось сбросить счётчик`,loadedInAms:`Загружено в AMS/внешний слот`,remaining:`Остаток`,weightCheck:`Проверка массы`,lastWeighed:`Последнее взвешивание`,neverWeighed:`Не взвешивалась`,search:`Поиск катушек…`,showing:`Показано`,to:`–`,of:`из`,show:`Показывать`,spools:`катушек`,spool:`катушка`,page:`Страница`,noSpoolsMatch:`Ничего не найдено`,noSpoolsMatchDesc:`Измените поисковый запрос или фильтры.`,active:`Активные`,archived:`Архивные`,all:`Все`,used:`Израсходовано`,new:`Новые`,clearFilters:`Сбросить фильтры`,table:`Таблица`,cards:`Карточки`,net:`Нетто`,groupSimilar:`Группировать`,groupedSpools:`Одинаковых катушек: {{count}}`,groupedRows:`строк`,columns:`Столбцы`,configureColumns:`Настроить столбцы`,configureColumnsDesc:`Перетаскивайте столбцы или используйте стрелки для изменения порядка. Видимость переключается значком глаза.`,visible:`видимых`,reset:`Сбросить`,cancel:`Отмена`,applyChanges:`Применить изменения`,moveUp:`Переместить вверх`,moveDown:`Переместить вниз`,hideColumn:`Скрыть столбец`,showColumn:`Показать столбец`,linkToSpool:`Связать с катушкой`,tagLinked:`Метка связана с катушкой`,tagLinkFailed:`Не удалось связать метку`,tagAlreadyLinked:`Метка уже связана с катушкой #{{id}}`,unknownTag:`Обнаружена неизвестная RFID-метка`,usageHistory:`История расхода`,noUsageHistory:`Расход пока не зарегистрирован`,printName:`Название печати`,weightConsumed:`Израсходованная масса`,clearHistory:`Очистить`,historyCleared:`История расхода очищена`,fillSourceLabel:`(Учёт)`,lowStockThresholdError:`Порог должен быть от 0,1 до 99,9`,assignMismatchTitle:`Несоответствие материала`,assignMismatchMessage:`Материал выбранной катушки «{{spoolMaterial}}» не соответствует материалу слота «{{trayMaterial}}» в {{location}}. Всё равно назначить?`,assignMismatchConfirm:`Всё равно назначить`,assignPartialMismatchMessage:`Материал катушки «{{spoolMaterial}}» похож, но не совпадает точно с «{{trayMaterial}}» в {{location}}. Продолжить?`,assignProfileMismatchMessage:`Профиль катушки «{{spoolProfile}}» не соответствует профилю слота «{{trayProfile}}» в {{location}}. Продолжить?`,assignReconfigureNote:`Слот AMS будет перенастроен на профиль катушки.`,spoolmanFilamentCatalog:`Каталог филаментов Spoolman`,pickFromSpoolmanCatalog:`Выбрать из каталога Spoolman…`,spoolmanFilamentSelected:`Филамент выбран из каталога Spoolman`,spoolmanFilamentUnlinked:`Связь с каталогом филаментов удалена`,noSpoolmanFilaments:`В каталоге Spoolman филаменты не найдены`,spoolmanFilamentColorSwatch:`Цвет филамента`,spoolWeightManagedBySpoolman:`Масса пустой катушки задаётся в Spoolman для каждого типа филамента`,spoolmanCatalogLoadFailed:`Не удалось загрузить каталог филаментов Spoolman`},timelapse:{title:`Таймлапс`,create:`Создать таймлапс`,download:`Скачать`,delete:`Удалить`,preview:`Предпросмотр`,frameRate:`Частота кадров`,quality:`Качество`,processing:`Обработка...`,noTimelapses:`Таймлапсы отсутствуют`},ams:{title:`AMS`,slot:`Слот`,empty:`Пусто`,emptySlot:`Пустой слот`,slotEmpty:`Пусто`,slotUnconfigured:`?`,emptySlotReset:`Филамент не назначен`,unknown:`Неизвестно`,humidity:`Влажность`,temperature:`Температура`,filamentType:`Тип филамента`,filamentColor:`Цвет`,remaining:`Остаток`,history:`История AMS`,noHistory:`История отсутствует`,configureSlot:`Настроить слот`,externalSpool:`Внешняя катушка`,profile:`Профиль`,kFactor:`Коэффициент K`,kFactorShort:`K`,fill:`Заполнить`,configure:`Настроить`,used:`использовано`,remainingUnit:`осталось`},printModal:{variants:{editNote:`Эти варианты заданы при добавлении в очередь. Чтобы изменить их, отмените и добавьте заново.`,title:`Варианты принтера`,help:`Одна задача, одно место в очереди. Первый подходящий освободившийся принтер напечатает свой файл.`,unknownModel:`Неизвестная модель`,plateFor:`Стол для {{filename}}`,moveUp:`Вверх`,moveDown:`Вниз`,queued:`В очереди, вариантов: {{count}}`},selectPrinter:`Выберите принтер`,selectPlate:`Выберите пластину`,filamentMapping:`Сопоставление филаментов`,useArchiveMapping:`Маппинг`,useArchiveMappingTooltip:`Выбрать все ячейки из маппинга AMS, сохранённого с этим архивом (от слайсера), вместо подбора по типу/цвету.`,clickToChangeSlot:`Нажмите, чтобы изменить назначение ячейки`,reRead:`Перечитать`,plateN:`Пластина {{n}}`,plateFilamentsUnreadable:`Не удалось определить филаменты выбранной пластины, поэтому их невозможно сопоставить. Снимите выбор с этой пластины, чтобы добавить остальные в очередь.`,totalCost:`Общая стоимость:`,slotRemainingShort:` — осталось {{grams}} г`,printSettings:`Настройки печати`,bedLeveling:`Калибровка стола`,flowCalibration:`Калибровка потока`,vibrationCalibration:`Калибровка вибраций`,layerInspection:`Проверка первого слоя`,timelapse:`Таймлапс`,cancel:`Отмена`,noPrintersAvailable:`Нет доступных принтеров`,printerBusy:`Принтер занят`,printerOffline:`Принтер не в сети`,sameTypeDifferentColor:`Тот же тип, другой цвет`,filamentTypeNotLoaded:`Филамент этого типа не загружен`,statusReady:`Готово`,statusColorMismatch:`Цвет не совпадает`,statusTypeNotFound:`Тип не найден`,requiredTooltip:`Требуется: {{name}} - {{color}}`,manuallySelected:`Выбрано вручную`,autoMatched:`Подобрано автоматически`,selectSlot:`Выбрать слот`,sameTypeDifferentColorDetail:`Тот же тип, другой цвет: нужен {{required}}, в слоте {{loaded}}`,requiredTypeNotInPrinter:`Требуемый тип филамента не найден в принтере.`,whenToPrint:`Когда печатать`,asap:`Как можно скорее`,queue:`В очередь`,schedule:`По расписанию`,dateTime:`Дата и время`,invalidDateTime:`Введите корректные дату и время`,openCalendar:`Открыть календарь`,requireManualStart:`Требовать ручного запуска`,requirePreviousSuccess:`Запускать только после успешной предыдущей печати`,autoOffAfter:`Выключить принтер после завершения`,helpAsap:`Задание будет добавлено в начало очереди и запустится, как только подходящий принтер освободится.`,helpSchedule:`Задание запустится в указанное время, если принтер свободен. Если принтер занят, оно будет ждать освобождения.`,helpQueue:`Задание будет добавлено в конец очереди.`,leftNozzle:`Л`,rightNozzle:`П`,leftNozzleTooltip:`Левое сопло`,rightNozzleTooltip:`Правое сопло`,ftsSameInletHint:`Все филаменты для этой печати подключены к переключателю тракта филамента IN-{{inlet}}. Смена между филаментами на одном входе идёт медленнее — переставьте один в AMS на другом входе.`,rackPosition:`Позиция в стойке`,rackPositionTooltip:`Каким соплом из стойки печатать этот филамент. Позиции нумеруются так же, как на принтере.`,rackEmptyPosition:`Эта позиция в стойке пуста`,rackWrongNozzle:`Установлено сопло {{has}}; этому филаменту нужно {{needs}}`,filamentOverride:`Переопределение филаментов`,filamentOverrideHint:`При необходимости замените филаменты для назначения по модели. Планировщик будет сопоставлять выбранные филаменты вместо исходных значений из 3MF.`,originalFilament:`Исходный`,overrideWith:`Заменить на`,resetToOriginal:`Вернуть исходный`,insufficientFilamentTitle:`Недостаточно филамента`,waitingForAmsStatus:`Ожидание состояния AMS от принтера {{printer}}…`,insufficientFilamentMessage:`На некоторых назначенных катушках осталось меньше филамента, чем требуется для этой печати:`,insufficientFilamentLine:`{{printer}} — {{slot}}: требуется {{required}} г, осталось {{remaining}} г`,insufficientFilamentLinePooled:`{{printer}} — {{slot}}: требуется {{required}} г, доступно {{remaining}} г на подходящих катушках (резервный филамент AMS)`,printAnyway:`Всё равно печатать`,forceColorMatch:`Обязательно учитывать цвет`,staggerPrinterStarts:`Запускать принтеры с задержкой`,staggerGroupSize:`Размер группы`,staggerInterval:`Интервал (мин)`,staggerPreview:`{{printers}} принтеров → {{groups}} групп по {{size}}, запуск каждые {{interval}} мин`,staggerLastGroup:`последняя группа: {{count}}`,staggerTotal:`всего: {{minutes}} мин`,staggerToPrinters:`Распределить запуск для {{count}} принтеров`,gcodeInjection:`Добавить G-code автозапуска`,insufficientBudget:`Недостаточно бюджета`,unlimitedNoBudget:`Без ограничений — лимит бюджета не задан.`,noPrintableCostCenters:`Нет активного центра затрат, доступного для печати. Попросите администратора предоставить вам доступ к печати.`},backup:{includesEncryptionKey:`Локальные резервные копии включают файл ключа шифрования MFA (DATA_DIR/.mfa_encryption_key), поэтому ZIP-архив является самодостаточным. Считайте этот ZIP конфиденциальным: любой, у кого есть файл, сможет расшифровать сохранённые в нём секреты клиента OIDC и TOTP.`,title:`Резервное копирование и восстановление`,createBackup:`Создать резервную копию`,restoreBackup:`Восстановить из копии`,restoreDescription:`Заменить все данные данными из резервной копии`,downloadBackup:`Скачать резервную копию`,uploadBackup:`Загрузить резервную копию`,lastBackup:`Последняя копия`,autoBackup:`Автоматическое резервное копирование`,backupNow:`Создать копию сейчас`,restoreWarning:`Внимание: восстановление из резервной копии перезапишет все текущие данные.`,includeArchives:`Включить архивы`,includeSettings:`Включить настройки`,includeProfiles:`Включить профили`,backupSuccess:`Резервная копия успешно создана`,restoreSuccess:`Резервная копия успешно восстановлена`,backupFailed:`Не удалось создать резервную копию`,restoreFailed:`Не удалось выполнить восстановление`,restoreNote:`На время восстановления виртуальный принтер будет остановлен`,githubBackup:`Резервная копия в Git`,enabled:`Включено`,cloudLoginRequired:`Требуется вход в Bambu Cloud. Войдите в разделе «Профили → Облачные профили», чтобы включить резервное копирование в GitHub.`,cloudLoginRequiredShort:`Требуется вход в облако`,githubDescription:`Автоматически синхронизировать профили с приватным репозиторием GitHub для резервного копирования и хранения истории версий.`,repoIsPrivate:`Репозиторий приватный — резервное копирование безопасно.`,repoIsPublicWarning:`Репозиторий ПУБЛИЧНЫЙ. Резервные копии Bambuddy содержат учётные данные MQTT, токены Home Assistant и Prometheus, адрес электронной почты Bambu Cloud и коды доступа к принтерам из K-профилей. Сохранение заблокировано, пока репозиторий не будет сделан приватным в настройках провайдера.`,repoVisibilityUnknown:`Не удалось определить видимость репозитория. Bambuddy отказывается создавать резервные копии в репозитории, приватность которого не подтверждена; сохранение будет заблокировано.`,repositoryUrl:`URL репозитория`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Разрешить небезопасный HTTP`,allowInsecureHttpHint:`Включайте для локальных серверов в частной сети без TLS`,personalAccessToken:`Персональный токен доступа`,tokenSaved:`(сохранён)`,enterNewToken:`Введите новый токен для обновления`,tokenHintGitHub:`Токен с точечными правами на чтение и запись Contents либо классический токен с областью repo.`,tokenHintGitLab:`Токен с областью api либо read_repository вместе с write_repository.`,tokenHintGitea:`Токен с областью write:repository.`,tokenHintForgejo:`Токен с областью write:repository. Достаточно токена, ограниченного только этим репозиторием.`,branch:`Ветка`,provider:`Git-провайдер`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Только вручную`,hourly:`Ежечасно`,daily:`Ежедневно`,weekly:`Еженедельно`,includeInBackup:`Включить в резервную копию`,kProfiles:`K-профили`,kProfilesDescription:`Калибровки Pressure Advance с подключённых принтеров`,noPrintersConnected:`Нет подключённых принтеров`,printersConnected:`Подключено {{connected}} из {{total}}`,cloudProfiles:`Облачные профили`,cloudProfilesDescription:`Предустановки филамента, принтера и процесса из Bambu Cloud и Orca Cloud`,cloudProfilesAccounts:`Подключённые аккаунты — Bambu Cloud: {{bambu}}, Orca Cloud: {{orca}}`,appSettings:`Настройки приложения`,appSettingsDescription:`Конфигурация Bambuddy (полная база данных)`,spoolInventory:`Учёт катушек`,spoolInventoryDescription:`Катушки филамента, история расхода и учёт стоимости`,printArchives:`Архив печати`,printArchivesDescription:`Метаданные истории печати без файлов G-code и 3MF`,lastBackupAt:`Последняя копия:`,noBackupsYet:`Резервных копий пока нет`,next:`Следующая:`,startingBackup:`Запуск резервного копирования...`,test:`Проверить`,enableBackup:`Включить резервное копирование`,testConnection:`Проверить соединение`,enterRepoUrl:`Введите URL репозитория`,enterRepoAndToken:`Введите URL репозитория и токен доступа`,repoRequired:`Необходимо указать URL репозитория`,tokenRequired:`Необходимо указать токен доступа`,githubBackupEnabled:`Резервное копирование в GitHub включено`,tokenUpdated:`Токен обновлён`,settingsSaved:`Настройки сохранены`,failedToSave:`Не удалось сохранить: {{message}}`,backupCompleteFiles:`Резервное копирование завершено — обновлено файлов: {{count}}`,backupSkippedNoChanges:`Резервное копирование пропущено — изменений нет`,backupFailed2:`Ошибка резервного копирования: {{message}}`,clearedLogs:`Очищено записей журнала: {{count}}`,failedToClearLogs:`Не удалось очистить журнал: {{message}}`,restoreFromGit:{button:`Восстановить из Git`,title:`Восстановление из резервной копии Git`,subtitle:`Выберите коммит и данные для восстановления`,commitLabel:`Коммит резервной копии`,latestCommit:`Последняя резервная копия (вершина ветки)`,categoriesLabel:`Что восстановить`,inspecting:`Чтение содержимого резервной копии...`,itemCount:`{{count}} в резервной копии`,overwriteLabel:`Перезаписывать существующие записи`,overwriteOn:`Существующие записи будут обновлены из резервной копии.`,overwriteOff:`Добавляются только отсутствующие записи, существующие не изменяются.`,selectedCount:`Выбрано: {{count}}`,restoring:`Восстановление...`,confirmTitle:`Восстановить из резервной копии?`,confirmMessage:`Выбранные категории будут восстановлены из этого коммита. Отсутствующие записи будут добавлены, существующие останутся без изменений.`,confirmMessageOverwrite:`Выбранные категории будут восстановлены из этого коммита с перезаписью уже существующих локальных записей. Отменить это действие нельзя.`,kprofilesOverwriteCaveat:`K-профили — исключение: запись в слот всегда заменяет калибровку на принтере.`,tally:`восстановлено: {{restored}}, пропущено: {{skipped}}, с ошибкой: {{failed}}`,reloadHint:`Перезагрузите Bambuddy, чтобы восстановленные данные отобразились везде.`,partialHint:`Перечисленные выше категории завершены и сохранены. Отсутствующие категории не выполнялись.`,failed:`Не удалось выполнить восстановление.`,loadFailed:`Не удалось прочитать репозиторий резервных копий.`,details:{notPresent:`Отсутствует в этом коммите резервной копии`,unreadableJson:`Нечитаемый JSON: {{paths}}`,settingsNoPayload:`В данных нет настроек`,settingsCredentialsWillSkip:`Ключей, похожих на учётные данные, будет пропущено: {{count}}`,settingsCompanionWillSkip:`Ключей, похожих на учётные данные, будет пропущено: {{count}}, а зависящие от них переключатели ({{companion}}) останутся выключенными`,settingsCompanionOnlyWillSkip:`Переключатели ({{companion}}) останутся выключенными - учётные данные, нужные каждому из них, нельзя восстановить из резервной копии`,spoolsUsageCount:`включая записей расхода: {{count}}`,archivesMetadataOnly:`Только метаданные - файлы 3MF и миниатюры не входят в резервную копию Git`,kprofilesPrinterCount:`по {{count}} принтерам`},notes:{noData:`В этой резервной копии нет данных такого типа`,archivesPrinterMissing:`Некоторые архивы ссылались на несуществующие принтеры - связь очищена`,archivesProjectMissing:`Некоторые архивы ссылались на несуществующие проекты - связь очищена`,archivesOwnerCleared:`Некоторые архивы ссылались на несуществующих пользователей - владелец очищен, поэтому они видны только пользователям с правом archives:read_all, пока администратор не назначит владельца заново`,archivesOwnerUnmatched:`Некоторые архивы указывают владельца, которого нет в этом экземпляре - владелец очищен, а не угадан по идентификатору пользователя из резервной копии, поэтому они видны только пользователям с правом archives:read_all, пока администратор не назначит владельца заново`,archivesOwnerUnknown:`Некоторые архивы восстановлены без владельца - в этой резервной копии он не записан, поэтому они видны только пользователям с правом archives:read_all, пока администратор не назначит владельца`,archivesUndeleted:`Архивы, удалённые после резервного копирования, снова видны - перезапись была включена`,archivesMetadataOnly:`Восстановленные архивы содержат только метаданные - файлы 3MF и миниатюры не входят в резервную копию Git`,spoolUsageUnresolved:`Записей расхода пропущено: {{count}} - их катушки нет в списке катушек этой резервной копии, поэтому привязать их не к чему.`,spoolUsageUnlinked:`Записей расхода восстановлено без связи с историей печати: {{count}} - выберите «Архивы печати» вместе с «Инвентарём катушек», чтобы сохранить связь.`,spoolTagKept:`Меток катушек оставлено без изменений: {{count}} - резервная копия стёрла бы метку, отсканированную позже, или перенесла бы её на другую катушку.`,settingsCredentialsSkipped:`Ключей, похожих на учётные данные, пропущено: {{count}} - введите секреты вручную`,settingsAuthSkipped:`Настроек аутентификации пропущено: {{count}} - меняйте их в разделе «Настройки > Аутентификация», чтобы продолжали работать проверки блокировки`,settingsCompanionSkipped:`{{keys}} оставлены выключенными - нужные им учётные данные нельзя восстановить из резервной копии, и в этом экземпляре они не сохранены, поэтому включение оставило бы интеграцию без аутентификации`,settingsMqttRelayFailed:`Настройки MQTT восстановлены, но переподключить реле не удалось - перезапустите Bambuddy`,kprofilesAlwaysOverwrite:`K-профили всегда перезаписывают соответствующий слот на принтере`,kprofilesAckUnreliable:`Принтер, который не отвечает, всё равно считается восстановленным - проверьте профили на принтере`,kprofilesPrinterMissing:`Нет принтера с серийным номером {{serial}} - пропущено`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) не подключён - пропущено`,kprofilesUnknownNozzle:`Неожиданный диаметр сопла {{nozzle}} для {{serial}} - отправлено как есть`,kprofilesUnmatched:`Профилей для {{nozzle}} без соответствия на {{printer}}: {{count}} - добавлены как новые профили`,kprofilesSendFailed:`Не удалось отправить профили {{nozzle}} на {{printer}} ({{serial}})`,kprofilesRefused:`{{printer}} ({{serial}}) отклонил профили {{nozzle}}: {{reason}}`,kprofilesStepFailed:`Не удалось завершить этап K-профилей - {{reason}}. Всё, что было восстановлено до него, сохранено.`}},history:`История`,clear:`Очистить`,date:`Дата`,status:`Статус`,trigger:`Тип`,triggers:{manual:`Резервная копия (вручную)`,scheduled:`Резервная копия (по расписанию)`,restore:`Восстановление`},commit:`Коммит`,localBackup:`Локальная резервная копия`,localBackupDescription:`Создать полную резервную копию данных Bambuddy, включая базу данных, архивы, загрузки и все файлы.`,downloadBackupLabel:`Скачать резервную копию`,completeBackupZip:`Полная копия: база данных и все файлы (ZIP)`,download:`Скачать`,preparingBackup:`Подготовка резервной копии...`,creatingArchive:`Создание архива резервной копии... Для больших архивов это может занять некоторое время.`,downloadingFile:`Скачивание файла резервной копии...`,backupDownloaded:`Резервная копия успешно скачана`,failedToCreateBackup:`Не удалось создать резервную копию: {{message}}`,restore:`Восстановить`,restoreReplacesAll:`Восстановление заменит все данные.`,restoreReplacesAllDetail:`Текущая база данных и файлы будут полностью заменены. После восстановления потребуется перезапуск.`,restoreConfirmTitle:`Восстановление из резервной копии`,restoreConfirmMessage:`Восстановить данные из файла «{{filename}}»? Текущая база данных и все файлы будут полностью заменены. После восстановления приложение потребуется перезапустить.`,restoreConfirmButton:`Восстановить`,uploadingFile:`Загрузка файла резервной копии...`,backupRestoredRestart:`Резервная копия восстановлена. Перезапустите Bambuddy.`,failedToRestore:`Не удалось восстановить резервную копию. Проверьте формат файла.`,reloadNow:`Перезагрузить сейчас`,creatingBackup:`Создание резервной копии`,restoringBackup:`Восстановление данных`,preparing:`Подготовка...`,processing:`Обработка...`,doNotClosePage:`Не закрывайте эту страницу и не переходите на другую. Для больших резервных копий операция может занять несколько минут.`,restoring:`Восстановление...`,restoreComplete:`Восстановление завершено`,restoreFailed2:`Ошибка восстановления`,importSettings:`Импортировать настройки из файла резервной копии`,pleaseWaitRestoring:`Подождите, пока данные восстанавливаются`,selectBackupFile:`Нажмите, чтобы выбрать файл резервной копии (.json или .zip)`,duplicateHandling:`Правила обработки дубликатов:`,matchPrinters:`Принтеры`,matchPrintersBy:`сопоставляются по серийному номеру`,matchSmartPlugs:`Умные розетки`,matchSmartPlugsBy:`сопоставляются по IP-адресу`,matchNotificationProviders:`Провайдеры уведомлений`,matchNotificationProvidersBy:`сопоставляются по имени`,matchFilaments:`Филаменты`,matchFilamentsBy:`сопоставляются по имени, типу и бренду`,matchArchives:`Архивы`,matchArchivesBy:`сопоставляются по хешу содержимого и всегда пропускаются`,matchPendingUploads:`Ожидающие загрузки`,matchPendingUploadsBy:`сопоставляются по имени файла`,matchSettingsTemplates:`Настройки и шаблоны`,matchSettingsTemplatesBy:`всегда перезаписываются`,replaceExisting:`Заменять существующие данные`,keepExisting:`Сохранять существующие данные`,overwriteDescription:`Перезаписывать существующие элементы данными из резервной копии`,keepDescription:`Восстанавливать только отсутствующие элементы`,overwriteCaution:`Внимание:`,overwriteWarning:`Перезапись заменит текущие настройки данными из резервной копии. В целях безопасности коды доступа к принтерам никогда не перезаписываются.`,cancel:`Отмена`,processingBackup:`Обработка файла резервной копии...`,itemsRestored:`Восстановлено элементов`,itemsSkipped:`Пропущено элементов`,restored:`Восстановлено`,skippedAlreadyExist:`Пропущено — уже существует`,filesCategory:`Файлы (3MF, миниатюры и т. п.)`,andMore:`...и ещё {{count}}`,newApiKeysGenerated:`Созданы новые API-ключи`,keysShownOnce:`Эти ключи показываются только один раз. Скопируйте их сейчас!`,copy:`Копировать`,noDataFound:`В резервной копии не найдено данных для восстановления.`,close:`Закрыть`,scheduledBackup:`Резервные копии по расписанию`,scheduledBackupDescription:`Автоматически создавать снимки резервных копий по расписанию. Каталог назначения можно смонтировать с NAS или внешнего накопителя.`,frequency:`Периодичность`,backupTime:`Время`,retention:`Хранение`,retentionDescription:`Количество сохраняемых резервных копий`,outputPath:`Каталог назначения`,outputPathPlaceholder:`По умолчанию: {{path}}`,outputPathDescription:`Оставьте пустым, чтобы использовать стандартный каталог`,runNow:`Запустить сейчас`,backupFiles:`Файлы резервных копий`,noScheduledBackups:`Резервных копий пока нет`,deleteBackup:`Удалить`,deleteBackupConfirm:`Удалить этот файл резервной копии?`,backupRunning:`Выполняется резервное копирование...`,scheduledBackupComplete:`Резервная копия успешно создана`,scheduledBackupFailed:`Ошибка резервного копирования`,nextBackup:`Следующая копия`,backupSize:`Размер`,localTimeHint:`Местное время ({{tz}})`,defaultPathLabel:`По умолчанию:`,pathCheck:{title:`Bambuddy не может записывать в этот каталог`,howToFix:`Как исправить:`,sandboxed:`Служба Bambuddy не может записывать в {{path}}. Её модуль systemd работает с ProtectSystem=strict, поэтому все каталоги за пределами каталогов установки, данных и журналов доступны службе только для чтения, даже если из вашей командной оболочки запись разрешена.`,read_only:`{{path}} находится в файловой системе, доступной только для чтения.`,permission_denied:`Bambuddy не разрешена запись в {{path}}. Проверьте владельца каталога и права доступа.`,no_space:`В файловой системе, содержащей {{path}}, закончилось свободное место.`,not_a_directory:`{{path}} существует, но не является каталогом.`,missing:`{{path}} не существует, и создать этот каталог не удалось.`,error:`Bambuddy не может записывать в {{path}}.`,ephemeralTitle:`Эти резервные копии не сохранятся после перезапуска контейнера`,container_ephemeral:`{{path}} находится внутри контейнера Bambuddy, а не на хосте. Записанные туда резервные копии будут потеряны при пересоздании контейнера. Подключите каталог с хоста:`},categories:{settings:`Настройки`,notification_providers:`Провайдеры уведомлений`,notification_templates:`Шаблоны уведомлений`,smart_plugs:`Умные розетки`,printers:`Принтеры`,filaments:`Филаменты`,maintenance_types:`Виды обслуживания`,archives:`Архивы`,projects:`Проекты`,pending_uploads:`Ожидающие загрузки`,external_links:`Внешние ссылки`,api_keys:`API-ключи`}},tags:{title:`Метки`,addTag:`Добавить метку`,editTag:`Изменить метку`,deleteTag:`Удалить метку`,tagName:`Название метки`,tagColor:`Цвет метки`,noTags:`Меток нет`,deleteConfirm:`Удалить эту метку?`,manageTags:`Управление метками`},uploadModal:{title:`Загрузка файлов 3MF`,dragDrop:`Перетащите файлы .3mf сюда`,or:`или`,browseFiles:`Выбрать файлы`,extractionInfo:`Модель принтера будет автоматически определена по метаданным файла 3MF.`,uploaded:`загружено`,failed:`ошибок`,uploading:`Загрузка...`,upload:`Загрузить`,uploadFailed:`Не удалось загрузить`},editArchive:{title:`Редактирование архива`,name:`Название`,namePlaceholder:`Название печати`,printer:`Принтер`,noPrinter:`Без принтера`,project:`Проект`,noProject:`Без проекта`,itemsPrinted:`Напечатано изделий`,itemsPrintedHelp:`Количество изделий, полученных в этом задании печати. Укажите 0, если испорчена вся пластина.`,filamentUsed:`Израсходованный филамент (г)`,filamentUsedPlaceholder:`напр. 46.16`,filamentUsedHelp:`Укажите вручную, если печать заархивирована без 3MF — тогда она попадёт в итоги по филаменту. При повторном сканировании архива с 3MF значение снова считывается из файла.`,notes:`Заметки`,notesPlaceholder:`Добавьте заметки об этой печати...`,externalLink:`Внешняя ссылка`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Ссылка на Printables, Thingiverse или другой источник`,tags:`Метки`,tagsPlaceholder:`Добавить метки...`,addMoreTags:`Добавить ещё метки...`,matchingTags:`Совпадения для «{{query}}»`,existingTags:`Существующие метки`,clickToAdd:`(нажмите, чтобы добавить)`,status:`Статус`,failureReason:`Причина сбоя`,selectReason:`Выберите причину...`,photos:`Фотографии результата печати`,photosHelp:`Нажмите +, чтобы добавить фотографии результата`,printResult:`Результат печати`,saving:`Сохранение...`,failureReasons:{adhesionFailure:`Плохая адгезия к столу`,spaghettiDetached:`Спагетти / отрыв детали`,layerShift:`Сдвиг слоёв`,cloggedNozzle:`Засор сопла`,filamentRunout:`Закончился филамент`,warping:`Коробление`,stringing:`Стрингинг`,underExtrusion:`Недоэкструзия`,powerFailure:`Сбой питания`,userCancelled:`Отменено пользователем`,noStatusUpdate:`Обновление статуса не получено`,other:`Другое`},statuses:{completed:`Завершено`,failed:`Ошибка`,aborted:`Отменено`,printing:`Печать`}},kProfiles:{title:`K-профили`,noPrintersConfigured:`Принтеры не настроены`,addPrinterInSettings:`Добавьте принтер в настройках, чтобы управлять K-профилями`,noActivePrinters:`Нет активных принтеров`,enablePrinterConnection:`Включите подключение к принтеру, чтобы просматривать его K-профили`,loadingProfiles:`Загрузка K-профилей...`,printerOffline:`Принтер не в сети`,printerOfflineDesc:`Выбранный принтер не подключён. Включите его, чтобы просмотреть K-профили.`,noMatchingProfiles:`Подходящие профили не найдены`,noMatchingProfilesDesc:`Ни один профиль не соответствует условиям поиска`,noKProfiles:`K-профили отсутствуют`,noKProfilesDesc:`Для сопла {{diameter}} мм не найдены профили Pressure Advance`,createFirstProfile:`Создать первый профиль`,printer:`Принтер`,nozzle:`Сопло`,refresh:`Обновить`,addProfile:`Добавить профиль`,export:`Экспорт`,import:`Импорт`,select:`Выбрать`,selectAll:`Выбрать все`,delete:`Удалить`,searchPlaceholder:`Поиск по названию или филаменту...`,allExtruders:`Все экструдеры`,leftOnly:`Только левый`,rightOnly:`Только правый`,allFlow:`Любой тип потока`,hfOnly:`Только HF`,sOnly:`Только S`,sortName:`Сортировка: название`,sortKValue:`Сортировка: K-значение`,sortFilament:`Сортировка: филамент`,leftExtruder:`Левый экструдер`,rightExtruder:`Правый экструдер`,modal:{addTitle:`Добавить K-профиль`,editTitle:`Изменить K-профиль`,profileName:`Название профиля`,profileNamePlaceholder:`Мой профиль PLA`,kValue:`K-значение`,kValuePlaceholder:`0.020`,kValueHelp:`Типичный диапазон: 0,01–0,06 для PLA, 0,02–0,10 для PETG`,filament:`Филамент`,selectFilament:`Выберите филамент...`,source:{local:`Импортированные`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Встроенный`},noFilamentsHelp:`Нет доступных филаментов. Войдите в Bambu Cloud или импортируйте пресеты в разделе Профили → Локальные профили.`,searchFilaments:`Поиск филаментов...`,noFilamentMatches:`Нет филаментов, соответствующих запросу`,flowType:`Тип потока`,highFlow:`Высокопоточный`,standard:`Стандартный`,nozzleSize:`Диаметр сопла`,extruder:`Экструдер`,extruders:`Экструдеры`,left:`Левый`,right:`Правый`,notes:`Заметки (хранятся локально)`,notesPlaceholder:`Добавьте заметки об этом профиле...`,notesHelp:`Заметки сохраняются в Bambuddy, а не на принтере`,syncing:`Синхронизация с принтером...`,savingExtruder:`Сохранение в экструдер {{current}}/{{total}}...`,pleaseWait:`Подождите`},deleteConfirm:{title:`Удалить профиль`,cannotUndo:`Это действие нельзя отменить`,message:`Удалить профиль «{{name}}» с принтера?`},bulkDelete:{title:`Удалить профили`,cannotUndo:`Это действие нельзя отменить`,message:`Удалить с принтера выбранные профили ({{count}})?`},toast:{profileSaved:`K-профиль сохранён`,profilesSaved:`K-профиль сохранён для {{count}} экструдеров`,selectAtLeastOneExtruder:`Выберите хотя бы один экструдер`,selectFilament:`Сначала выберите филамент`,filamentNotResolvable:`Нет идентификатора филамента Bambu для {{name}} — принтер не сможет сохранить профиль`,profileDeleted:`K-профиль удалён`,profilesDeleted:`Удалено профилей: {{count}}`,exportedProfiles:`Экспортировано профилей: {{count}}`,importedProfiles:`Импортировано {{count}} из {{total}} профилей`,noProfilesToExport:`Нет профилей для экспорта`,invalidFileFormat:`Недопустимый формат файла`,failedToParseImport:`Не удалось разобрать файл импорта`,failedToSaveBatch:`Не удалось сохранить K-профили`,noteSaved:`Заметка сохранена`,failedToSaveNote:`Не удалось сохранить заметку`},permission:{noRead:`У вас нет прав на обновление профилей`,noCreate:`У вас нет прав на добавление профилей`,noUpdate:`У вас нет прав на изменение K-профилей`,noDelete:`У вас нет прав на удаление K-профилей`,noExport:`У вас нет прав на экспорт профилей`,noImport:`У вас нет прав на импорт профилей`}},virtualPrinter:{title:`Виртуальный принтер`,running:`Запущен`,stopped:`Остановлен`,description:{default:`Включает виртуальный принтер, который отображается в Bambu Studio и OrcaSlicer. Отправленные на него файлы сразу сохраняются в архив без печати.`,proxy:`Включает прокси, перенаправляющий трафик слайсера на реальный принтер и позволяющий печатать удалённо из любой сети.`},enable:{title:`Включить виртуальный принтер`,visibleInSlicer:`Отображается как «Bambuddy» при обнаружении принтеров в слайсере`,proxyingTo:`Проксирование на {{name}}`,notActive:`Не активен`},model:{title:`Модель принтера`,description:`Выберите модель принтера, которую нужно эмулировать.`,restartWarning:`При изменении модели виртуальный принтер будет перезапущен`},accessCode:{title:`Код доступа`,isSet:`Код доступа задан`,notSet:`Код доступа не задан — он необходим для включения`,placeholder:`Введите 8-значный код`,placeholderChange:`Введите новый код`,hint:`Код должен состоять ровно из 8 символов. Слайсеры используют его для аутентификации.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Унаследован от целевого принтера`,derivedFromTargetHint:`Используется код доступа целевого принтера. Мост перенаправляет аутентификацию слайсера на реальный принтер, поэтому коды должны совпадать. Чтобы изменить значение, измените код доступа самого принтера.`,reveal:`Показать код доступа`,hide:`Скрыть код доступа`},targetPrinter:{title:`Целевой принтер`,configured:`Целевой принтер для прокси настроен`,notConfigured:`Целевой принтер не выбран — он необходим для режима прокси`,placeholder:`Выберите принтер...`,hint:`Выберите принтер, на который будет перенаправляться трафик слайсера. Принтер должен работать в режиме LAN.`,noPrinters:`Нет настроенных принтеров. Сначала добавьте принтер.`},remoteInterface:{title:`Переопределение сетевого интерфейса`,configured:`Переопределение интерфейса активно`,optional:`Необязательно — используйте, если IP определён неверно, например при нескольких сетевых картах, Docker или VPN`,placeholder:`Определять автоматически...`,hint:`Переопределяет IP-адрес, публикуемый через SSDP и используемый в TLS-сертификате. Полезно, если у Bambuddy несколько сетевых интерфейсов.`},mode:{title:`Режим`,archive:`Архив`,archiveDesc:`Сразу сохранять файлы в архив`,review:`Проверка`,reviewDesc:`Проверять перед добавлением в архив`,queue:`Очередь`,queueDesc:`Сохранять в архив и добавлять в очередь`,proxy:`Прокси`,proxyDesc:`Перенаправлять на реальный принтер`},autoDispatch:{title:`Автоматический запуск`,description:`Автоматически запускать задания после добавления в очередь. Если выключено, задания ожидают ручного запуска.`},queueForceColorMatch:{title:`Требовать совпадения цвета`,description:`Не назначать задание принтеру, если загружены филамент другого типа или другого цвета. По умолчанию выключено: без этой проверки очередь сопоставляет только модель принтера и может выбрать принтер с неподходящим цветом.`},saveAmsMapping:{title:`Сохранять маппинг AMS`,description:`Сохранять выбор AMS-ячейки, который сделал слайсер (из MQTT-команды project_file), в архив — тогда повторная печать использует ту же физическую катушку вместо повторного подбора по типу/цвету файла. По умолчанию выключено.`},gcodeInjection:{title:`Вставка G-code`,description:`Применять к заданиям этого виртуального принтера фрагменты G-code для соответствующей модели, заданные в настройках. По умолчанию выключено.`},tailscaleDisabled:{title:`Интеграция Tailscale`,description:`Отметить этот виртуальный принтер как доступный через Tailscale. Будет показан Tailscale-адрес хоста, который нужно указать в слайсере. Импорт сертификата центра сертификации выполняется как обычно; этот переключатель на сертификаты не влияет.`},setupRequired:{title:`Требуется настройка`,description:`Для работы виртуального принтера требуется дополнительная настройка системы: перенаправление портов, правила межсетевого экрана и параметры, зависящие от платформы.`,readGuide:`Перед включением прочитайте руководство по настройке`},archiveNameSource:{title:`Источник названия архива`,description:`Выберите способ формирования названия новых архивов для файлов, полученных через виртуальный принтер. «Метаданные» использует поле Title, встроенное слайсером в 3MF. «Имя файла» использует имя, переданное Bambu Studio по FTP. Bambu Studio заменяет введённое в окне отправки название значением Title из 3MF, если оно присутствует, поэтому оба режима часто дают одинаковый результат.`,metadata:`Метаданные`,filename:`Имя файла`},caCert:{title:`Сертификат для слайсера`,description:`Виртуальные принтеры используют TLS-сертификат, подписанный центром сертификации Bambuddy. Один раз импортируйте этот сертификат CA в хранилище доверенных сертификатов слайсера, чтобы он принимал соединение.`,copy:`Копировать`,copied:`Скопировано`,download:`Скачать`,fingerprint:`SHA-256`},howItWorks:{title:`Как это работает`,step1:`В одной локальной сети виртуальные принтеры автоматически появляются в Bambu Studio и OrcaSlicer. Из других сетей добавьте их вручную по IP-адресу и коду доступа.`,step2:`В режимах «Архив», «Проверка» и «Очередь» используйте кнопку «Отправить» в слайсере для загрузки 3MF в Bambuddy. Слайсер покажет сообщение об успешной печати, но файл будет только сохранён, без запуска печати.`,step3:`В режиме прокси виртуальный принтер перенаправляет весь трафик на реальный принтер — печать запускается сразу, как при прямом подключении.`},status:{title:`Сведения о состоянии`,printerName:`Имя принтера`,model:`Модель`,serialNumber:`Серийный номер`,mode:`Режим`,pendingFiles:`Ожидающие файлы`,targetPrinter:`Целевой принтер`,ftpPort:`Порт FTP`,mqttPort:`Порт MQTT`,ftpConnections:`Соединения FTP`,mqttConnections:`Соединения MQTT`},toast:{updated:`Настройки виртуального принтера обновлены`,failedToUpdate:`Не удалось обновить настройки`,copyFailed:`Не удалось скопировать — выделите текст вручную`,accessCodeRequired:`Сначала задайте код доступа`,targetPrinterRequired:`Сначала выберите целевой принтер`,bindIpRequired:`Сначала задайте IP-адрес привязки`,accessCodeEmpty:`Код доступа не может быть пустым`,accessCodeLength:`Код доступа должен состоять ровно из 8 символов`,targetCodeChangedRebind:`Код доступа приведён в соответствие с новым целевым принтером. Удалите и снова добавьте устройство в слайсере, чтобы он получил новый код.`,created:`Виртуальный принтер создан`,failedToCreate:`Не удалось создать виртуальный принтер`,deleted:`Виртуальный принтер удалён`,failedToDelete:`Не удалось удалить виртуальный принтер`},list:{title:`Виртуальные принтеры`,add:`Добавить`,addFirst:`Добавить виртуальный принтер`,empty:`Виртуальные принтеры не настроены. Добавьте первый принтер.`},bindIp:{title:`Интерфейс привязки`,placeholder:`Выберите интерфейс...`,hint:`Сетевой интерфейс, к которому будет привязан этот виртуальный принтер. Для каждого принтера он должен быть уникальным.`},proxy:{accessCodeHint:`В режиме прокси используйте в слайсере код доступа целевого принтера. Соединение прозрачно перенаправляется на реальный принтер.`},addDialog:{title:`Добавление виртуального принтера`,name:`Название`,hint:`После создания можно настроить код доступа, целевой принтер и остальные параметры.`,create:`Создать`},deleteConfirm:{title:`Удаление виртуального принтера`,message:`Удалить «{{name}}»? Все службы этого виртуального принтера будут остановлены.`}},modelViewer:{openInSlicer:`Открыть в слайсере`,openInSlicerWith:`Открыть в {{slicer}}`,moreSlicerOptions:`Другие варианты слайсера`,openInSlicerFailed:`Не удалось открыть в слайсере`,tabs:{model:`3D-модель`},notAvailable:`недоступно`,plates:`Пластины`,allPlates:`Все пластины`,plateNumber:`Пластина {{number}}`,plateCount:`{{count}} пластина`,plateCount_other:`{{count}} пластин`,objectCount:`{{count}} объект`,objectCount_other:`{{count}} объектов`,filamentCount:`{{count}} филамент`,filamentCount_other:`{{count}} филаментов`,eta:`Осталось {{minutes}} мин`,noPreview:`Для этого файла нет предпросмотра`,pagination:{pageOf:`Страница {{current}} из {{total}}`,prev:`Назад`,next:`Далее`},errors:{failedToLoad:`Не удалось загрузить файл`,noMeshes:`В файле 3MF не найдены сеточные модели`,unsupportedFormat:`Неподдерживаемый формат файла`}},maintenanceDescriptions:{lubricateCarbonRods:`Смазать углепластиковые направляющие для плавного перемещения`,lubricateRails:`Смазать линейные направляющие для плавного перемещения`,cleanNozzle:`Очистить хотэнд и сопло для предотвращения засоров`,checkBelts:`Проверить натяжение ремней для сохранения точности печати`,cleanBuildPlate:`Очистить печатную пластину для улучшения адгезии`,checkExtruder:`Проверить шестерни экструдера на износ`,checkCooling:`Проверить исправность вентиляторов охлаждения`,generalInspection:`Общий осмотр принтера`,cleanCarbonRods:`Очистить углепластиковые направляющие для уменьшения трения`,lubricateSteelRods:`Смазать стальные направляющие для плавного перемещения`,cleanSteelRods:`Очистить стальные направляющие для уменьшения трения`,cleanLinearRails:`Протереть линейные направляющие от пыли и загрязнений`,checkPtfeTube:`Проверить PTFE-трубку на износ и повреждения`,replaceHepaFilter:`Заменить HEPA-фильтр`,replaceCarbonFilter:`Заменить угольный фильтр`,lubricateLeftNozzleRail:`Смазать направляющую левого сопла (серия H2)`},haSensors:{label:`Датчики`,unavailable:`Недоступно`,blocksPrints:`{{entity}} — удерживает печать, пока активно оповещение`,states:{open:`Открыто`,closed:`Закрыто`,unlocked:`Разблокировано`,locked:`Заблокировано`,detected:`Обнаружено`,clear:`Чисто`,wet:`Влажно`,dry:`Сухо`,problem:`Проблема`,ok:`Норма`,running:`Работает`,stopped:`Остановлено`,on:`Вкл`,off:`Выкл`},sectionTitle:`Датчики Home Assistant (принтеры)`,add:`Добавить датчик`,addTitle:`Добавить датчик Home Assistant`,editTitle:`Изменить датчик Home Assistant`,empty:`Датчиков пока нет. Свяжите дверной контакт или термометр из Home Assistant, чтобы показать его на карточке принтера.`,unknownPrinter:`Неизвестный принтер`,badgeBlocks:`Удерживает печать`,badgeNotifies:`Уведомляет`,badgeHidden:`Скрыт на карточке`,printer:`Принтер`,entity:`Сущность`,searchPlaceholder:`Поиск сущностей...`,noEntities:`Подходящих сущностей нет`,name:`Отображаемое имя`,alertWhen:`Оповещать когда`,alertNever:`Никогда — только показывать`,alertAbove:`Выше`,alertBelow:`Ниже`,alertHint:`Состояние оповещения подсвечивает датчик на карточке принтера и включает параметры ниже.`,showOnCard:`Показывать в карточке принтера`,notifyOnAlert:`Отправлять уведомление при срабатывании`,blockPrint:`Удерживать печать в очереди, пока активно оповещение`,blockPrintHint:`Задания остаются в очереди и запускаются сами, когда датчик приходит в норму. Игнорируется, пока Home Assistant недоступен.`,toast:{created:`Датчик добавлен`,updated:`Датчик сохранён`,deleted:`Датчик удалён`},error:{pickEntity:`Выберите сущность Home Assistant`,nameRequired:`Введите отображаемое имя`,printerRequired:`Выберите принтер`,alertRequired:`Сначала задайте условие оповещения`}},locationHaSensors:{sectionTitle:`Датчики Home Assistant (места хранения)`,sectionDescription:`Привяжите датчики температуры, влажности или заряда батареи Home Assistant к местам хранения, чтобы показывать актуальные значения на карточке филамента и в таблице. Для каждого места хранения допускается только один датчик на категорию.`,add:`Добавить датчик`,addTitle:`Добавить датчик Home Assistant`,editTitle:`Изменить датчик Home Assistant`,empty:`Датчиков пока нет. Свяжите датчик температуры или влажности из Home Assistant, чтобы показать его на карточке филамента.`,unknownLocation:`Неизвестное место`,location:`Место хранения`,showOnCard:`Показывать на карточке филамента`,overwriteConfirm:{title:`Заменить существующий датчик?`,messageTemperature:`У «{{location}}» уже привязан датчик температуры: {{name}}. Продолжение заменит его.`,messageHumidity:`У «{{location}}» уже привязан датчик влажности: {{name}}. Продолжение заменит его.`,messageBattery:`У «{{location}}» уже привязан датчик заряда батареи: {{name}}. Продолжение заменит его.`},autoAdd:{confirmTitle:`Добавить также остальные датчики?`,confirmMessage:`Bambuddy также нашёл другие датчики для этого места. Выберите, какие добавить.`,added:`Также добавлено: {{names}}`,noneFound:`Подходящие датчики температуры, влажности или заряда батареи для этого места не найдены.`,onlyThisOne:`Только этот`},options:{buttonLabel:`Настройки датчиков`,title:`Настройки датчиков места хранения`,description:`Эти значения используются, когда датчик температуры, влажности или заряда батареи привязывается автоматически вместе с первым датчиком места хранения.`,generalSettings:`Общие настройки`,pollInterval:`Интервал обновления (секунды)`,pollIntervalHint:`Как часто Bambuddy опрашивает Home Assistant и обновляет значения датчиков на экране. Минимум 60 секунд.`,colorizeValues:`Окрашивать значения датчиков в соответствии с их порогами тревоги`,aboveColor:`Цвет при превышении порога`,belowColor:`Цвет при значении ниже порога`,optimalColor:`Цвет оптимального значения`,colors:{red:`Красный`,orange:`Оранжевый`,yellow:`Жёлтый`,green:`Зелёный`,blue:`Синий`,purple:`Фиолетовый`,pink:`Розовый`},saved:`Настройки сохранены`,saveFailed:`Не удалось сохранить настройки`,reset:`Сбросить`,resetConfirm:{title:`Сбросить все существующие датчики мест хранения?`,message:`Это перезапишет пороги тревоги, уведомления и видимость на карточке для всех существующих датчиков температуры, влажности и заряда батареи мест хранения значениями, настроенными выше, а также восстановит имя каждого датчика до его понятного имени в Home Assistant — датчики принтеров не затрагиваются. Это действие нельзя отменить. В зависимости от количества датчиков это может занять некоторое время.`},resetDone:`Применено к {{count}} датчикам мест хранения`,resetFailed:`Не удалось сбросить датчики мест хранения`},deleteAllConfirm:{title:`Удалить все датчики?`,message:`Будут удалены все {{count}} датчиков, привязанных к «{{location}}». Это действие нельзя отменить.`},currentlyBound:`Сейчас привязан: {{entity}}`,error:{locationRequired:`Выберите место хранения`},toast:{created:`Датчик добавлен`,updated:`Датчик сохранён`,deleted:`Датчик удалён`}},smartPlugs:{offline:`Не в сети`,admin:`Управление`,openPlugAdminPage:`Открыть страницу управления розеткой`,deleteSmartPlug:`Удалить умную розетку`,turnOnSmartPlug:`Включить умную розетку`,turnOffSmartPlug:`Выключить умную розетку`,turnOn:`Включить`,turnOff:`Выключить`,addSmartPlug:{scanningNetwork:`Сканирование сети...`,chooseEntity:`Выберите сущность...`,connectionFailed:`Ошибка подключения`,searchEntities:`Поиск сущностей...`,searchPowerSensors:`Поиск датчиков мощности...`,searchEnergySensors:`Поиск датчиков энергии...`,placeholders:{plugName:`Розетка в гостиной`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Та же тема, что для мощности, или другая`}},linkedTo:`Связана с:`,monitorOnly:`Только мониторинг`,alerts:`Оповещения`,scheduleOn:`Включение в {{time}}`,scheduleOff:`Выключение в {{time}}`,on:`Включена`,off:`Выключена`,power:`Мощность`,kwhToday:`кВт·ч сегодня`,settings:`Настройки`,automationSettings:`Настройки автоматизации`,showInSwitchbar:`Показывать на панели переключателей`,quickAccessSidebar:`Быстрый доступ с боковой панели`,enabled:`Включено`,enableAutomation:`Включить автоматизацию для этой розетки`,autoOn:`Автовключение`,autoOnDescription:`Включать при начале печати`,autoOff:`Автовыключение`,autoOffDescription:`Выключать после завершения печати (однократно)`,autoOffPersistent:`Оставлять включённым`,autoOffPersistentDescription:`Не сбрасывать автовыключение после печати`,controlsPrinterPower:`Питает принтер`,controlsPrinterPowerDescription:`Отключите, если эта розетка питает только аксессуар (вентилятор фильтра, подсветку). Иначе её выключение помечает принтер как офлайн.`,autoOffAfterDrying:`Выключать после сушки`,autoOffAfterDryingDescription:`Выключать после завершения сушки в AMS`,delayAfterDryingMinutes:`Задержка после сушки (мин)`,turnOffDelayMode:`Условие отложенного выключения`,time:`Время`,temp:`Температура`,delayMinutes:`Задержка (мин)`,tempThreshold:`Порог температуры (°C)`,tempThresholdDescription:`Выключать, когда сопло остынет ниже этой температуры`,edit:`Изменить`,deleteConfirm:`Удалить «{{name}}»? Это действие нельзя отменить.`,turnOnConfirm:`Включить «{{name}}»?`,turnOffConfirm:`Выключить «{{name}}»? Питание подключённого устройства будет отключено.`,failedToTurn:`Не удалось {{action}} «{{name}}»`,unknown:`Неизвестно`,addTitle:`Добавление умной розетки`,editTitle:`Редактирование умной розетки`,stopScanning:`Остановить сканирование`,discoverTasmota:`Найти устройства Tasmota`,foundDevices:`Найдено устройств: {{count}}. Нажмите для выбора:`,noDevicesFound:`Устройства Tasmota в сети не найдены`,haNotConfigured:`Home Assistant не настроен. Настройте его в разделе`,haSettingsPath:`Настройки → Сеть → Home Assistant`,selectEntity:`Выберите сущность *`,ipAddress:`IP-адрес *`,nameLabel:`Название *`,username:`Имя пользователя`,password:`Пароль`,authHint:`Оставьте пустым, если устройство Tasmota не требует аутентификации`,linkToPrinter:`Связать с принтером`,noPrinter:`Без принтера — только ручное управление`,linkingDescription:`Связь позволяет автоматически включать и выключать питание при начале и завершении печати`,powerAlerts:`Оповещения о мощности`,alertAbove:`Оповещать выше (Вт)`,alertBelow:`Оповещать ниже (Вт)`,alertDescription:`Отправлять уведомление при пересечении заданных порогов мощности. Оставьте поле пустым, чтобы отключить соответствующий порог.`,dailySchedule:`Ежедневное расписание`,turnOnAt:`Включать в`,turnOffAt:`Выключать в`,scheduleDescription:`Ежедневно включать и выключать розетку в указанное время. Оставьте поле пустым, чтобы не выполнять соответствующее действие.`,showOnPrinterCard:`Показывать в карточке принтера`,displayOnPrinterCard:`Показывать кнопку в карточке принтера`,connectedResult:`Подключено!`,deviceLabel:`Устройство: {{name}} — `,stateLabel:`Состояние: {{state}}`,test:`Проверить`,delete:`Удалить`,save:`Сохранить`,add:`Добавить`,cancel:`Отмена`,failedToStartScan:`Не удалось запустить сканирование`,nameRequired:`Укажите название`,entityRequired:`Для розеток Home Assistant необходимо выбрать сущность`,mqttTopicRequired:`Для мониторинга мощности, энергии или состояния необходимо настроить хотя бы одну тему MQTT`,loadingEntities:`Загрузка сущностей...`,loading:`Загрузка...`,failedToLoadEntities:`Не удалось загрузить сущности: {{error}}`,noEntitiesMatching:`Сущности по запросу «{{search}}» не найдены`,noEntitiesAvailable:`Нет доступных сущностей`,searchingEntities:`Поиск по всем сущностям, найдено: {{count}}`,showingEntities:`Показаны switch, light и input_boolean, доступно: {{count}}`,energyMonitoringOptional:`Мониторинг энергии (необязательно)`,energyMonitoringHint:`Найдите и выберите датчики мощности и энергии.`,powerSensorW:`Датчик мощности (Вт)`,energyTodayKwh:`Энергия за сегодня (кВт·ч)`,totalEnergyKwh:`Общая энергия (кВт·ч)`,noMatchingSensors:`Подходящие датчики не найдены`,none:`Нет`,mqttNotConfigured:`Брокер MQTT не настроен. Укажите его адрес в разделе`,mqttSettingsPath:`Настройки → Сеть → Публикация MQTT`,mqttNotConfiguredSuffix:`Включать публикацию не обязательно — достаточно заполнить параметры брокера.`,mqttMonitorOnlyDescription:`Розетки MQTT получают данные мощности и энергии через подписку MQTT. Управление включением и выключением недоступно — используйте брокер MQTT или систему домашней автоматизации.`,powerMonitoring:`Мониторинг мощности`,energyMonitoring:`Мониторинг энергии`,stateMonitoring:`Мониторинг состояния`,optional:`необязательно`,topic:`Тема`,jsonPath:`Путь JSON`,multiplier:`Множитель`,onValue:`Значение «включено»`,mqttPowerHint:`Путь JSON извлекает значение из полезной нагрузки JSON, например «power_l1». Оставьте пустым, если тема публикует число напрямую.
+ON değeri: "ON" anlamına gelen tam string. Otomatik algılama için boş bırakın (ON, true, 1).`,restControl:`Kontrol`,restOnUrl:`AÇ URL'si`,restOffUrl:`KAPAT URL'si`,restOnBody:`AÇ İstek Gövdesi`,restOffBody:`KAPAT İstek Gövdesi`,restMethod:`HTTP Yöntemi`,restHeaders:`Özel Başlıklar (JSON)`,restStatusUrl:`Durum URL'si`,restStatusPath:`Durum JSON Yolu`,restStatusOnValue:`ON Değeri`,restPowerUrl:`Güç URL'si`,restPowerPath:`Güç JSON Yolu`,restPowerMultiplier:`Güç Çarpanı`,restEnergyUrl:`Enerji URL'si`,restEnergyPath:`Enerji JSON yolu (bugün)`,restEnergyTotalPath:`Enerji JSON yolu (toplam sayaç)`,restEnergyTotalMultiplier:`Toplam sayaç çarpanı`,restEnergyTotalPathHint:`örn. aenergy.total`,restEnergyTotalHint:`Birçok priz — tüm Shelly'ler dahil — yalnızca hiç sıfırlanmayan bir toplam sayaç bildirir. Bu değer yukarıdaki alana değil, buraya girilmelidir: bugünün tüketimi olarak okunursa gece yarısı sıfırlanmaz, Dün ve Toplam da boş kalır. Bambuddy Bugün ve Dün değerlerini bundan hesaplar; bunun için bir iki günlük ölçüm gerekir. Shelly watt-saat bildirdiğinden çarpan olarak 0.001 kullanın.`,restEnergyMultiplier:`Enerji Çarpanı`,restUrlRequired:`REST prizleri için en az bir URL (ON veya OFF) gerekli`,restHeadersHint:`örn. {"Authorization": "Bearer your-token"}`,restBodyHint:`örn. ON, {"state": "on"}`,restStatusHint:`Mevcut durumu sorgulamak için URL`,restPathHint:`örn. state veya data.power.status`,restPowerUrlHint:`Güç verisi için ayrı URL (boşsa Durum URL'sini kullanır)`,restEnergyUrlHint:`Enerji verisi için ayrı URL (boşsa Durum URL'sini kullanır)`,restEnergyHint:`Her değer kendi URL'sini kullanabilir veya Durum URL'sine geri dönebilir. Birim dönüşümü için çarpanları kullanın (örn. Wh'yi kWh'ye dönüştürmek için 0.001).`,testConnection:`Bağlantıyı Test Et`,connectionSuccess:`Bağlantı başarılı`,noSwitchesInSwitchbar:`Anahtar çubuğunda anahtar yok`,enableSwitchbarHint:`Ayarlar > Akıllı Prizler'de "Anahtar Çubuğunda Göster"i etkinleştirin`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`E-posta`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`SMTP e-posta bildirimleri`,telegram:`Telegram botu üzerinden bildirimler`,discord:`Webhook üzerinden Discord kanalına gönder`,ntfy:`Ücretsiz, kendi barındırılabilir push bildirimleri`,pushover:`Basit, güvenilir push bildirimleri`,callmebot:`CallMeBot üzerinden ücretsiz WhatsApp bildirimleri`,webhook:`Herhangi bir URL'ye genel HTTP POST`,homeassistant:`Home Assistant gösterge panelinde kalıcı bildirimler`,bark:`Bark ile iOS anlık bildirimleri (kendi sunucunuzda barındırılabilir)`},lastSuccess:`Son: {{date}}`,error:`Hata`,printer:`Yazıcı:`,allPrinters:`Tüm yazıcılar`,sendTestNotification:`Test Bildirimi Gönder`,eventSettings:`Olay Ayarları`,enabled:`Etkin`,sendFromProvider:`Bu sağlayıcıdan bildirim gönder`,printEvents:`Baskı Olayları`,printerStatus:`Yazıcı Durumu`,amsAlarms:`AMS Alarmları`,amsHtAlarms:`AMS-HT Alarmları`,printQueue:`Baskı Kuyruğu`,start:`Başlangıç`,plateCheck:`Plaka Kontrolü`,complete:`Tamamlandı`,failed:`Başarısız`,stopped:`Durduruldu`,progress:`İlerleme`,offline:`Çevrimdışı`,lowFilament:`Az Filament`,maintenance:`Bakım`,amsHumidity:`AMS Nemi`,amsTemp:`AMS Sıcaklığı`,amsDryingSuspended:`Kurutma askıya alındı`,amsHtHumidity:`AMS-HT Nemi`,amsHtTemp:`AMS-HT Sıcaklığı`,bedCooled:`Tabla Soğudu`,firstLayer:`İlk Katman`,quiet:`Sessiz`,digest:`Özet {{time}}`,printStarted:`Baskı Başladı`,plateNotEmpty:`Plaka Boş Değil`,plateNotEmptyDescription:`Baskıdan önce nesneler algılandı`,plateClearRequired:`Tabla onayı gerekli`,plateClearRequiredDescription:`Baskı bitti, kuyruk tabla onayını bekliyor`,plateClear:`Tabla onayı`,printCompleted:`Baskı Tamamlandı`,bedCooledLabel:`Tabla Soğudu`,bedCooledDescription:`Baskıdan sonra tabla eşiğin altına soğudu`,firstLayerCompleteLabel:`İlk Katman Tamamlandı`,firstLayerCompleteDescription:`İlk katman bittiğinde anlık görüntüyle bildir`,missingSpoolAssignmentLabel:`Eksik Makara Ataması`,billingChargeFailedLabel:`Ücretlendirme hatası`,billingChargeFailedDescription:`Baskı maliyetleri kaydedilemediğinde bildirim gönder`,missingSpoolAssignmentDescription:`Baskı başladığında ve gerekli tepsilerin atanmış makarası olmadığında bildir`,printFailed:`Baskı Başarısız`,printStopped:`Baskı Durduruldu`,progressMilestones:`İlerleme Kilometre Taşları`,progressMilestonesDescription:`%25, %50, %75'te bildir`,printerOffline:`Yazıcı Çevrimdışı`,printerError:`Yazıcı Hatası`,aiFailureDetection:`AI Hata Tespiti`,aiFailureDetectionDescription:`Obico AI olası bir baskı hatası tespit ettiğinde bildir`,lowFilamentLabel:`Az Filament`,maintenanceDue:`Bakım Zamanı`,maintenanceDueDescription:`Bakım gerektiğinde bildir`,amsHumidityHigh:`AMS Nemi Yüksek`,amsHumidityHighDescription:`Normal AMS nemi eşiği aşıyor`,amsTemperatureHigh:`AMS Sıcaklığı Yüksek`,amsTemperatureHighDescription:`Normal AMS sıcaklığı eşiği aşıyor`,amsDryingSuspendedTitle:`Otomatik kurutma askıya alındı`,amsDryingSuspendedDescription:`Nem hiçbir zaman eşiğin altına inmediği için bir AMS ünitesinde otomatik kurutmadan vazgeçildi`,amsHtHumidityHigh:`AMS-HT Nemi Yüksek`,amsHtHumidityHighDescription:`AMS-HT nemi eşiği aşıyor`,amsHtTemperatureHigh:`AMS-HT Sıcaklığı Yüksek`,amsHtTemperatureHighDescription:`AMS-HT sıcaklığı eşiği aşıyor`,inventoryAlerts:`Envanter Uyarıları`,stockReorderAlert:`Yeniden Sipariş Uyarısı`,stockReorderAlertDescription:`SKU yeniden sipariş noktasına ulaştı`,stockBreakAlert:`Stok Tükenme Uyarısı`,stockBreakAlertDescription:`Yenileme gelmeden stok tükenecek`,jobAdded:`İş Eklendi`,jobAddedDescription:`İş kuyruğa eklendi`,jobAssigned:`İş Atandı`,jobAssignedDescription:`Model tabanlı iş yazıcıya atandı`,jobStarted:`İş Başladı`,jobStartedDescription:`Kuyruk işi yazdırmaya başladı`,jobWaiting:`İş Bekliyor`,jobWaitingDescription:`İş filament veya yazıcı için bekliyor`,jobSkipped:`İş Atlandı`,jobSkippedDescription:`İş atlandı (önceki başarısız oldu)`,jobFailed:`İş Başarısız`,jobFailedDescription:`İş başlatılamadı`,queueComplete:`Kuyruk Tamamlandı`,queueCompleteDescription:`Tüm kuyruk işleri bitti`,quietHours:`Sessiz Saatler`,noNotificationsDuring:`Bu saatler arasında bildirim yok`,editProviderToChangeQuietHours:`Sessiz saatleri değiştirmek için sağlayıcıyı düzenleyin`,dailyDigest:`Günlük Özet`,batchNotifications:`Bildirimleri tek bir günlük özette topla`,sendAt:`{{time}}'de gönder`,editProviderToChangeDigestTime:`Özet saatini değiştirmek için sağlayıcıyı düzenleyin`,edit:`Düzenle`,deleteProvider:`Bildirim Sağlayıcısını Sil`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz? Bu geri alınamaz.`,delete:`Sil`,addTitle:`Bildirim Sağlayıcısı Ekle`,editTitle:`Bildirim Sağlayıcısını Düzenle`,nameLabel:`Ad *`,namePlaceholder:`Bildirimlerim`,providerTypeLabel:`Sağlayıcı Türü *`,configuration:`Yapılandırma`,testConfiguration:`Yapılandırmayı Test Et`,printerFilter:`Yazıcı Filtresi`,onlyFromPrinter:`Yalnızca bu yazıcının olayları için bildirim gönder`,quietHoursDnd:`Sessiz Saatler (Rahatsız Etme)`,quietStart:`Başlangıç`,quietEnd:`Bitiş`,dailyDigestLabel:`Günlük Özet`,sendDigestAt:`Özeti şu saatte gönder`,digestCollected:`Olaylar toplanacak ve bu saatte tek bir özet olarak gönderilecek`,notificationEvents:`Bildirim Olayları`,progressPercent:`(%25, %50, %75)`,bedCooledAfterPrint:`(baskı tamamlandıktan sonra)`,haSensorAlert:`Yazıcı Sensörü Uyarısı`,haSensorAlertDescription:`(bağlı bir Home Assistant sensörü dikkat gerektiriyor)`,locationHaSensorAlert:`Konum Sensörü Uyarısı`,locationHaSensorAlertDescription:`(bir depolama konumuna bağlı Home Assistant sensörü dikkat gerektiriyor)`,eventPriority:{sectionTitle:`ntfy Önceliği`,helpNtfy:`Her etkin olay için bir öncelik seçin. ntfy uyarıları kademelendirmek için bunları kullanır (ses, görünürlük, push davranışı). Burada ayarlanmamış seviyeler ntfy sunucu varsayılanını kullanır.`,min:`Min`,low:`Düşük`,default:`Varsayılan`,high:`Yüksek`,urgent:`Acil`},cancel:`İptal`,save:`Kaydet`,add:`Ekle`,nameRequired:`Ad gerekli`,fieldRequired:`{{field}} gerekli`,haDataInvalid:`Data alanı geçerli bir JSON nesnesi olmalıdır, örn. {"priority": "high", "ttl": 0}`,phoneNumber:`Telefon Numarası`,apiKey:`API Anahtarı`,serverUrl:`Sunucu URL`,topic:`Konu`,authToken:`Yetkilendirme Belirteci`,userKey:`Kullanıcı Anahtarı`,appToken:`Uygulama Belirteci`,priority:`Öncelik`,pushoverRetry:`Acil yeniden deneme (sn)`,pushoverExpire:`Acil sona erme (sn)`,botToken:`Bot Belirteci`,chatId:`Sohbet ID`,telegramThreadId:`Forum Konu Kimliği`,telegramThreadIdHelp:`İsteğe bağlı. Forum grubundaki tek bir konuya gönderir: konu bağlantısındaki son sayı (t.me/c/.../25). Genel konu için boş bırakın.`,telegramThreadIdInvalid:`Forum konu kimliği bir sayı olmalıdır.`,smtpServer:`SMTP Sunucusu`,smtpPort:`SMTP Portu`,security:`Güvenlik`,authentication:`Kimlik Doğrulama`,username:`Kullanıcı Adı`,password:`Parola`,fromEmail:`Gönderen E-posta`,toEmail:`Alıcı E-posta`,webhookUrl:`Webhook URL`,payloadFormat:`Yük Formatı`,authorization:`Yetkilendirme`,titleFieldName:`Başlık Alanı Adı`,messageFieldName:`Mesaj Alanı Adı`,editTemplate:`Şablonu Düzenle: {{name}}`,titleLabel:`Başlık`,bodyLabel:`Gövde`,titlePlaceholder:`Bildirim başlığı...`,bodyPlaceholder:`Bildirim gövdesi...`,availableVariables:`Kullanılabilir Değişkenler`,clickToInsert:`Gövdede imleç konumuna eklemek için tıklayın`,livePreview:`Canlı Önizleme`,hide:`Gizle`,show:`Göster`,loadingPreview:`Önizleme yükleniyor...`,enterTemplateContent:`Önizlemeyi görmek için şablon içeriğini girin`,titlePreview:`Başlık:`,bodyPreview:`Gövde:`,resetToDefault:`Varsayılana Sıfırla`,titleRequired:`Başlık gerekli`,bodyRequired:`Gövde gerekli`,notificationLog:`Bildirim Günlüğü`,showFailedOnly:`Yalnızca başarısız`,last24Hours:`Son 24 saat`,last7Days:`Son 7 gün`,last30Days:`Son 30 gün`,last90Days:`Son 90 gün`,justNow:`Az önce`,noFailedNotifications:`Başarısız bildirim yok`,noNotificationsLogged:`Kaydedilen bildirim yok`,unknownProvider:`Bilinmeyen Sağlayıcı`,logTitle:`Başlık`,logMessage:`Mesaj`,logError:`Hata`,logProvider:`Sağlayıcı: {{type}}`,logTime:`Saat: {{time}}`,refresh:`Yenile`,clearOld:`Eskileri Temizle`,statsSummary:`Son {{days}} gün:`,statsNotifications:`bildirim`,statsSent:`{{count}} gönderildi`,statsFailed:`{{count}} başarısız`,eventTypes:{print_start:`Baskı Başladı`,print_complete:`Baskı Tamamlandı`,print_failed:`Baskı Başarısız`,print_stopped:`Baskı Durduruldu`,print_progress:`İlerleme`,printer_offline:`Yazıcı Çevrimdışı`,printer_error:`Yazıcı Hatası`,filament_low:`Az Filament`,maintenance_due:`Bakım Zamanı`,test:`Test`},userEmail:{title:`Bildirimler`,emailNotifications:`E-posta Bildirimleri`,emailNotificationsDesc:`Kendi baskı işleriniz için e-posta bildirimleri alın. E-postalar Gelişmiş Kimlik Doğrulamada yapılandırılan sistem SMTP ayarları kullanılarak gönderilir.`,sendingTo:`Bildirimler şuraya gönderilecek`,noEmailWarning:`Hesabınızın e-posta adresi yok. Eklemek için bir yöneticiyle iletişime geçin.`,printJobNotifications:`Baskı İşi Bildirimleri`,printJobNotificationsDesc:`Gönderdiğiniz baskı işleri için hangi olayların e-posta bildirimlerini tetikleyeceğini seçin.`,printJobStarts:`Baskı İşi Başlar`,printJobStartsDesc:`Baskı işiniz başladığında bildirim alın.`,printJobFinishes:`Baskı İşi Biter`,printJobFinishesDesc:`Baskı işiniz başarıyla tamamlandığında bildirim alın.`,printErrors:`Baskı Hataları`,printErrorsDesc:`Baskı işiniz başarısız olduğunda veya bir hatayla karşılaştığında bildirim alın.`,printJobStops:`Baskı İşi Durur`,printJobStopsDesc:`Baskı işiniz iptal edildiğinde veya durdurulduğunda bildirim alın.`,saveSuccess:`Bildirim tercihleri kaydedildi.`,saveError:`Bildirim tercihleri kaydedilemedi.`}},richTextEditor:{bold:`Kalın`,italic:`İtalik`,underline:`Altı Çizili`,bulletList:`Madde İşaretli Liste`,numberedList:`Numaralı Liste`,alignLeft:`Sola Hizala`,alignCenter:`Ortaya Hizala`,alignRight:`Sağa Hizala`,addLink:`Bağlantı Ekle`,removeLink:`Bağlantıyı Kaldır`},externalLinks:{title:`Kenar çubuğu bağlantıları`,sidebarLayout:`Kenar çubuğu`,sidebarLayoutDescription:`Yerleşik sayfaları gösterin veya gizleyin, harici bağlantılar ekleyin ve kenar çubuğu gezinmesini yeniden sıralamak için öğeleri sürükleyin.`,systemPages:`Bambuddy sayfaları`,externalLinks:`Harici bağlantılar`,visibleInSidebar:`Kenar çubuğunda görünür`,hiddenFromSidebar:`Kenar çubuğunda gizli`,requiredInSidebar:`Kenar çubuğunda gerekli`,hidePage:`Sayfayı gizle`,showPage:`Sayfayı göster`,settingsCannotBeHidden:`Ayarlar gizlenemez`,noLinksConfigured:`Yapılandırılmış harici bağlantı yok`,deleteLink:`Bağlantıyı Sil`,removeCustomIcon:`Özel simgeyi kaldır`,openInNewTab:`Yeni sekmede aç`,placeholders:{linkName:`Bağlantım`}},keyboardShortcuts:{title:`Klavye Kısayolları`,navigation:`Navigasyon`,archivesSection:`Arşivler`,kProfilesSection:`K-Profilleri`,generalSection:`Genel`,shortcuts:{goToPrinters:`Yazıcılara Git`,goToArchives:`Arşivlere Git`,goToQueue:`Kuyruğa Git`,goToStats:`İstatistiklere Git`,goToProfiles:`Bulut Profillerine Git`,goToSettings:`Ayarlara Git`,focusSearch:`Aramaya odaklan`,openUploadModal:`Yükleme modalini aç`,clearSelection:`Seçimi temizle / odağı kaldır`,contextMenu:`Kartlarda bağlam menüsü`,refreshProfiles:`Profilleri yenile`,newProfile:`Yeni profil`,exitSelectionMode:`Seçim modundan çık`,showHelp:`Bu yardımı göster`},footer:`Kapatmak için Esc'ye basın veya dışarı tıklayın`},notificationLog:{title:`Bildirim Günlüğü`,events:{printStarted:`Baskı Başladı`,printComplete:`Baskı Tamamlandı`,printFailed:`Baskı Başarısız`,printStopped:`Baskı Durduruldu`,progress:`İlerleme`,printerOffline:`Yazıcı Çevrimdışı`,printerError:`Yazıcı Hatası`,lowFilament:`Az Filament`,maintenanceDue:`Bakım Zamanı`,test:`Test`},timeAgo:{justNow:`Az önce`,minutesAgo:`{{minutes}}dk önce`,hoursAgo:`{{hours}}sa önce`}},restoreBackup:{title:`Yedeği Geri Yükle`,restoring:`Geri yükleniyor...`,restoreComplete:`Geri Yükleme Tamamlandı`,restoreFailed:`Geri Yükleme Başarısız`,importSettings:`Ayarları bir yedek dosyasından içe aktar`,pleaseWait:`Verileriniz geri yüklenirken lütfen bekleyin`,clickToSelect:`Yedek dosyası seçmek için tıklayın (.json veya .zip)`,howDuplicateHandling:`Yinelenen yönetiminin nasıl çalıştığı:`,categories:{printers:`Yazıcılar`,smartPlugs:`Akıllı Prizler`,notificationProviders:`Bildirim Sağlayıcıları`,filaments:`Filamentler`,archives:`Arşivler`,pendingUploads:`Bekleyen Yüklemeler`,settingsTemplates:`Ayarlar ve Şablonlar`},matchingInfo:{printers:`seri numarasına göre eşleşti`,smartPlugs:`IP adresine göre eşleşti`,notificationProviders:`ada göre eşleşti`,filaments:`ad + tür + markaya göre eşleşti`,archives:`içerik hash'ine göre eşleşti`,pendingUploads:`dosya adına göre eşleşti`,settingsTemplates:`her zaman üzerine yazılır`},replaceExisting:`Mevcut veriyi değiştir`,keepExisting:`Mevcut veriyi koru`,replaceDescription:`Zaten mevcut olan öğeleri yedek verisiyle üzerine yaz`,keepDescription:`Yalnızca zaten mevcut olmayan öğeleri geri yükle`,caution:`Dikkat:`,cautionText:`Üzerine yazma, mevcut yapılandırmalarınızı yedek verisiyle değiştirecek. Güvenlik için yazıcı erişim kodları asla üzerine yazılmaz.`,itemsRestored:`Geri Yüklenen Öğeler`,itemsSkipped:`Atlanan Öğeler`,restored:`Geri yüklendi`,skipped:`Atlandı (zaten mevcut)`,filesLabel:`Dosyalar (3MF, küçük resimler, vb.)`,newApiKeysGenerated:`Yeni API Anahtarları Oluşturuldu`,newApiKeysWarning:`Bu anahtarlar yalnızca bir kez gösterilir. Şimdi kopyalayın!`,processingBackup:`Yedek dosyası işleniyor...`,noDataFound:`Yedek dosyasında geri yüklenecek veri bulunamadı.`,failedToRestore:`Yedek geri yüklenemedi. Lütfen dosya formatını kontrol edin.`},backupExport:{title:`Yedeği Dışa Aktar`,selectData:`Dahil edilecek veriyi seçin`,selectAll:`Tümünü Seç`,selectNone:`Hiçbirini Seçme`,categoryDescriptions:{settings:`Dil, tema, güncelleme tercihleri`,notifications:`ntfy, Pushover, Discord, vb.`,templates:`Özel mesaj şablonları`,smartPlugs:`Tasmota priz yapılandırmaları`,externalLinks:`Harici servislere kenar çubuğu bağlantıları`,printers:`Yazıcı bilgisi (erişim kodları hariç)`,plateDetection:`Boş plaka referans görüntüleri`,filaments:`Filament türleri ve maliyetleri`,maintenance:`Özel bakım programları`,archives:`Tüm baskı verileri + dosyalar (3MF, küçük resimler, fotoğraflar)`,projects:`Projeler, BOM öğeleri ve ekler`,pendingUploads:`İnceleme bekleyen sanal yazıcı yüklemeleri`,apiKeys:`Webhook API anahtarları (içe aktarımda yeni anahtarlar oluşturulur)`},requiresPrinters:`Yazıcıların seçili olması gerekir`,zipFileWarning:`ZIP dosyası oluşturulacak.`,zipFileDescription:`Tüm 3MF dosyalarını, küçük resimleri, zaman atlamalı videoları ve fotoğrafları içerir. Bu biraz zaman alabilir ve büyük bir dosya oluşturabilir.`,includeAccessCodes:`Erişim Kodlarını Dahil Et`,includeAccessCodesDescription:`Başka bir makineye aktarmak için`,includeAccessCodesWarning:`Erişim kodları düz metin olarak dahil edilecek. Bu yedek dosyasını güvende tutun!`,categoriesSelected:`{{selectedCount}} kategori seçildi`},pendingUploads:{placeholders:{notes:`Bu baskı hakkında notlar ekleyin...`},discardUpload:`Yüklemeyi At`,archiveAllUploads:`Tüm Yüklemeleri Arşivle`,discardAllUploads:`Tüm Yüklemeleri At`,archive:`Arşivle`,timeAgo:{justNow:`Az önce`,minutesAgo:`{{minutes}}dk önce`,hoursAgo:`{{hours}}sa önce`,daysAgo:`{{days}}g önce`}},apiBrowser:{placeholders:{requestBody:`JSON istek gövdesi...`,searchEndpoints:`Uç noktalarda ara...`}},configureAmsSlot:{title:`AMS Yuvasını Yapılandır`,slotConfigured:`Yuva Yapılandırıldı!`,configuringSlot:`Yuva yapılandırılıyor:`,slotLabel:`{{ams}} Yuva {{slot}}`,searchPresets:`Ön ayarlarda ara...`,colorPlaceholder:`Renk adı veya hex (örn., kahverengi, FF8800)`,clearCustomColor:`Özel rengi temizle`,noCloudPresets:`Bulut ön ayarı yok. Senkronize etmek için Bambu Cloud'a giriş yapın.`,noPresetsAvailable:`Kullanılabilir ön ayar yok. Bambu Cloud'a giriş yapın veya yerel profilleri içe aktarın.`,noMatchingPresets:`Eşleşen ön ayar bulunamadı.`,custom:`Özel`,builtin:`Yerleşik`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Ayarlar yazıcıya gönderildi`,filamentProfile:`Filament Profili`,kProfileLabel:`K Profili (Basınç İlerlemesi)`,filteringFor:`Şu için filtreleniyor: {{material}}`,noKProfile:`K profili yok (varsayılan 0.020 kullan)`,noMatchingKProfiles:`Eşleşen K profili bulunamadı. Varsayılan K=0.020 kullanılacak.`,otherKProfiles:`Bu yazıcıdaki diğer K profilleri`,selectFilamentFirst:`Önce bir filament profili seçin`,kFromCalibration:`Yazıcı kalibrasyonundan K={{value}}`,customColorLabel:`Özel Renk (isteğe bağlı)`,presetColors:`{{name}} renkleri:`,showLessColors:`Daha az renk göster`,showMoreColors:`Daha fazla renk göster`,clear:`Temizle`,hexLabel:`Hex: #{{hex}}`,resetting:`Sıfırlanıyor...`,resetSlot:`Yuvayı Sıfırla`,cancel:`İptal`,configuring:`Yapılandırılıyor...`,configureSlot:`Yuvayı Yapılandır`},githubBackup:{title:`Git Yedekleme`,history:`Geçmiş`,downloadBackup:`Yedeği İndir`,restoreBackup:`Yedeği Geri Yükle`,noBackupsYet:`Henüz yedek yok`},emailSettings:{placeholders:{fromName:`BamBuddy`}},tagManagement:{searchTags:`Etiketlerde ara...`,renameTag:`Etiketi yeniden adlandır`,deleteTag:`Etiketi sil`},notificationTemplates:{placeholders:{title:`Bildirim başlığı...`,body:`Bildirim gövdesi...`}},batchTag:{placeholders:{newTag:`Yeni etiket girin...`}},photoGallery:{deletePhoto:`Fotoğrafı Sil`},filamentHoverCard:{copySpoolUuid:`Makara UUID'sini kopyala`},kProfilesView:{hasNote:`Notu var`,copyProfile:`Profili kopyala`},layout:{openMenu:`Menüyü aç`,noPermissionSystemInfo:`Sistem bilgisini görüntüleme izniniz yok`},dashboard:{dragToReorder:`Yeniden sıralamak için sürükleyin`,hideWidget:`Widget'ı gizle`},notificationProviderCard:{deleteNotificationProvider:`Bildirim Sağlayıcısını Sil`},fileManagerModal:{closeFileManager:`Dosya yöneticisini kapat`,sortFiles:`Dosyaları sırala`,goToParentFolder:`Üst klasöre git`,threeView:`3B Görünüm`},embeddedCameraViewer:{refreshStream:`Akışı yenile`,close:`Kapat`,zoomOut:`Uzaklaştır`,resetZoom:`Yakınlaştırmayı sıfırla`,zoomIn:`Yakınlaştır`,dragToResize:`Yeniden boyutlandırmak için sürükleyin`},timelapseViewer:{skipBack5s:`5 sn geri al`,skipForward5s:`5 sn ileri al`},notificationProviders:{descriptions:{email:`SMTP e-posta bildirimleri`,telegram:`Telegram botu üzerinden bildirimler`,discord:`Webhook üzerinden Discord kanalına gönder`,ntfy:`Ücretsiz, kendi barındırılabilir push bildirimleri`,pushover:`Basit, güvenilir push bildirimleri`,callmebot:`CallMeBot üzerinden ücretsiz WhatsApp bildirimleri`,webhook:`Herhangi bir URL'ye genel HTTP POST`}},logViewer:{searchPlaceholder:`Mesaj veya günlükçü adı ara...`,noLogEntries:`Günlük kaydı bulunamadı`},switchbarPopover:{noSwitchesInSwitchbar:`Anahtar çubuğunda anahtar yok`},projectPageModal:{placeholders:{title:`Başlık`,designer:`Tasarımcı`,license:`Lisans`,description:`Açıklama girin...`,profileTitle:`Profil Başlığı`,profileDescription:`Profil açıklaması...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`Bekliyor`,justNow:`Az önce`,now:`Şimdi`,minsAgo:`{{count}}dk önce`,inMins:`{{count}}dk sonra`,hoursAgo:`{{count}}sa önce`,inHours:`{{count}}sa sonra`,daysAgo:`{{count}}g önce`,inDays:`{{count}}g sonra`},spoolbuddy:{nav:{dashboard:`Gösterge Paneli`,ams:`AMS`,inventory:`Envanter`,writeTag:`Yaz`,settings:`Ayarlar`},status:{nfcReady:`NFC Hazır`,nfcOff:`NFC Kapalı`,offline:`Çevrimdışı`,online:`Çevrimiçi`,noPrinters:`Yazıcı yok`,deviceOffline:`Cihaz Çevrimdışı`,waitingConnection:`Cihaz bağlantısı bekleniyor...`,systemReady:`Sistem Hazır`,status:`Durum`},dashboard:{readyToScan:`Taramaya hazır`,idleMessage:`Tanımlamak için bir makarayı tartıya yerleştirin`,nfcHint:`NFC etiketi otomatik olarak okunacak`,device:`Cihaz`,syncWeight:`Ağırlığı Senkronize Et`,weightSynced:`Senkronize edildi!`,unknownTag:`Bilinmeyen Etiket`,newTag:`Yeni Etiket Algılandı`,onScale:`tartıda`,linkSpool:`Makaraya Bağla`,linkTagTitle:`Etiketi Makaraya Bağla`,linkTag:`Etiketi Bağla`,selectSpool:`Bu etiketi bağlamak için bir makara seçin:`,noUntagged:`Etiketsiz makara bulunamadı`,tagDetected:`Etiket algılandı`,noTag:`Etiket yok`,tagId:`Etiket`,grossWeight:`Brüt ağırlık`,spoolSize:`Makara boyutu`,close:`Kapat`,currentSpool:`Mevcut Makara`,plateReady:`Plaka hazır: {{name}}`,plateReadyLabel:`Temizlenmeye hazır plakalar`,plateClearAction:`Temizle`,plateClearedToast:`Plaka temizlendi olarak işaretlendi`,plateClearFailed:`Plaka temizlendi olarak işaretlenemedi`},modal:{spoolDetected:`Makara Algılandı`,assignToAms:`AMS'e Ata`,syncWeight:`Ağırlığı Senkronize Et`,weightSynced:`Senkronize edildi!`,syncing:`Senkronize ediliyor...`,newTagDetected:`Yeni Etiket Algılandı`,addToInventory:`Envantere Ekle`,assignToAmsTitle:`AMS'e Ata`,selectSlot:`Bir yuva seçin`,assign:`Ata`,assigning:`Atanıyor...`,assignSuccess:`Atandı!`,assignPendingInsert:`Atandı. Makarayı yerleştirdiğinizde yuva yapılandırılacak.`,assignError:`Makara atanamadı. Lütfen tekrar deneyin.`,noPrinterSelected:`Bir yazıcı seçin...`,noAmsDetected:`Bu yazıcıda AMS algılanmadı`,slot:`Yuva`},weight:{noReading:`Okuma yok`,stable:`Kararlı`,measuring:`Ölçülüyor...`,tare:`Dara`,calibrate:`Kalibre Et`},spool:{remaining:`Kalan`,material:`Malzeme`,brand:`Marka`,color:`Renk`,coreWeight:`Çekirdek`,labelWeight:`Etiket`,scaleWeight:`Tartı`,netWeight:`Net`,lastUsed:`Son kullanım`,unknownColor:`Bilinmeyen renk`},ams:{noData:`AMS algılanmadı`,connectAms:`Filament yuvalarını görmek için bir AMS bağlayın`,noPrinter:`Yazıcı seçilmedi`,selectPrinter:`Üst çubuktan bir yazıcı seçin`,printerDisconnected:`Yazıcı bağlantısı kesildi`,humidity:`Nem`,level:`Seviye`,active:`Aktif`,slot:`Yuva`,empty:`Boş`},inventory:{search:`Makaralarda ara...`,empty:`Envanterde makara yok`,noResults:`Eşleşen makara yok`,spools:`makara`,addSpool:`Makara Ekle`},settings:{tabDevice:`Cihaz`,tabDisplay:`Görüntü`,tabScale:`Tartı`,tabUpdates:`Güncellemeler`,nfcReader:`NFC Okuyucu`,type:`Tür`,connection:`Bağlantı`,notConnected:`N/A`,deviceInfo:`Cihaz Bilgisi`,hostname:`Ana Bilgisayar`,uptime:`Çalışma Süresi`,systemConfig:`Arka Uç ve Kimlik Doğrulama`,backendUrl:`Bambuddy Arka Uç URL'si`,apiToken:`API Belirteci`,apiTokenPlaceholder:`API belirtecini girin`,saveConfig:`Yapılandırmayı Kaydet`,systemQueued:`Yapılandırma kuyruğa alındı.`,nfcDiagnostic:`NFC Tanılaması`,scaleDiagnostic:`Tartı Tanılaması`,readTagDiagnostic:`Etiket Okuma Tanılaması`,testNfc:`Okuyucuyu test et`,testScale:`Doğruluğu test et`,testReadTag:`Etiket oku`,systemFieldsRequired:`Arka uç URL'si gerekli.`,brightness:`Parlaklık`,saved:`Kaydedildi`,noBacklight:`DSI arka ışık algılanmadı. Parlaklık kontrolü DSI ekran gerektirir.`,screenBlank:`Ekran Kapanma Zaman Aşımı`,screenBlankDesc:`Hareketsizlik sonrası ekran kapanır. Uyandırmak için dokunun.`,displayNote:`Parlaklık bir yazılım filtresi olarak uygulanır.`,scaleCalibration:`Tartı Kalibrasyonu`,currentWeight:`Mevcut ağırlık`,tareOffset:`Dara`,calFactor:`Faktör`,knownWeight:`Bilinen ağırlık`,calStep1:`Tartıdan tüm öğeleri kaldırın ve Sıfır Ayarla'ya basın.`,calStep2:`Bilinen ağırlığı tartıya yerleştirin.`,setZero:`Sıfır Ayarla`,calibrateNow:`Kalibre Et`,calibrated:`Kalibre edildi`,tareSet:`Dara komutu gönderildi. Cihaz bekleniyor...`,tareComplete:`Dara tamam!`,tareTimedOut:`Dara zaman aşımına uğradı — SpoolBuddy daemon çalışıyor mu?`,tareFailed:`Dara komutu gönderilemedi`,zeroSet:`Sıfır noktası ayarlandı. Bilinen ağırlığı tartıya yerleştirin.`,calibrationDone:`Kalibrasyon tamamlandı!`,calibrationFailed:`Kalibrasyon başarısız`,lastCalibrated:`Son kalibrasyon`,stable:`Kararlı`,settling:`Sabitleniyor...`,firmware:`Firmware`,scale:`Tartı`,noDevice:`SpoolBuddy cihazı bulunamadı`,daemonVersion:`Daemon Sürümü`,currentVersion:`Mevcut`,versionPending:`Daemon bekleniyor...`,checking:`Kontrol ediliyor...`,checkUpdates:`Güncellemeleri Kontrol Et`,updateAvailable:`Güncelleme mevcut`,updateInstructions:`SSH üzerinden güncelle: yükseltmek için SpoolBuddy yükleme betiğini çalıştırın.`,upToDate:`Güncel`,includeBeta:`Beta sürümleri dahil et`},writeTag:{tabExisting:`Mevcut Makara`,tabNew:`Yeni Makara`,tabReplace:`Etiketi Değiştir`,searchPlaceholder:`Malzeme, renk, marka ile ara...`,noUntaggedSpools:`Etiketsiz makara yok`,noTaggedSpools:`Etiketli makara yok`,selectSpool:`Bir makara seçin, ardından okuyucuya boş bir NTAG yerleştirin`,placeTag:`Okuyucuya bir NTAG yerleştirin`,tagReady:`Etiket algılandı — yazmaya hazır`,writeTag:`Etiketi Yaz`,replaceTag:`Etiketi Değiştir`,writing:`Etiket yazılıyor...`,waiting:`SpoolBuddy bekleniyor...`,writeSuccess:`Etiket başarıyla yazıldı!`,writeFailed:`Yazma başarısız`,queueFailed:`Yazma komutu kuyruğa alınamadı`,tryAgain:`Tekrar Dene`,cancel:`İptal`,replaceWarning:`Eski etiket bağlantısı kaldırılacak. Yeni etiket yerini alacak.`,deviceOffline:`SpoolBuddy çevrimdışı`,material:`Malzeme`,colorName:`Renk Adı`,color:`Renk`,brand:`Marka`,weight:`Ağırlık (g)`,createSpool:`Makara Oluştur`,creating:`Oluşturuluyor...`,spoolCreated:`Makara oluşturuldu! Yazmaya hazır.`,createFailed:`Makara oluşturulamadı`,incompleteDataWarning:`Etiket eksik Spoolman verisiyle yazıldı`},quickMenu:{printerPower:`Yazıcı Gücü`,systemControls:`Sistem`,restartDaemon:`Daemon'u Yeniden Başlat`,restartBrowser:`Tarayıcıyı Yeniden Başlat`,reboot:`Yeniden Başlat`,shutdown:`Kapat`,swipeToClose:`Kapatmak için aşağı kaydır`,confirmTitle:`Onayla`,confirmShutdown:`SpoolBuddy'yi kapatmak istediğinizden emin misiniz? Tekrar açmak için fiziksel erişime ihtiyacınız olacak.`,confirmReboot:`SpoolBuddy'yi yeniden başlatmak istediğinizden emin misiniz?`,confirmRestartDaemon:`SpoolBuddy daemon yeniden başlatılsın mı? NFC ve tartı geçici olarak kullanılamayacak.`,confirmRestartBrowser:`Kiosk tarayıcısı yeniden başlatılsın mı? Ekran kısa bir süre kararacak.`,confirm:`Onayla`,confirmPlugOn:`{{name}} açılsın mı?`,confirmPlugOff:`{{name}} kapatılsın mı?`,turnOn:`Aç`,turnOff:`Kapat`}},diagnostic:{modalTitle:`Bağlantı tanılaması — {{name}}`,running:`Tanılama çalışıyor...`,runningElapsed:`Tanılama çalışıyor... ({{elapsed}}s)`,waitingForReportHint:`Yazıcının durum raporu yayınlamasını bekliyor — bu işlem en fazla {{max}} saniye sürebilir.`,runFailed:`Tanılama çalıştırılamadı: {{error}}`,retry:`Tekrar çalıştır`,runButton:`Tanılamayı çalıştır`,sectionTitle:`Bağlantı Tanılaması`,sectionDescription:`Bir yazıcının neden bağlanmadığını veya yazdırmadığını kontrol edin — port erişilebilirliği, LAN geliştirici modu, Docker ağ modu ve kimlik bilgileri.`,noPrinters:`Yapılandırılmış yazıcı yok.`,overall:{ok:`Sorun bulunamadı — yazıcı bağlantısı sağlıklı görünüyor.`,warnings:`Yazıcı çalışmalı, ancak bazı şeyler dikkat gerektiriyor.`,problems:`Yazıcının neden bağlanmadığını veya yazdırmadığını açıklayan sorunlar bulundu.`},check:{port_mqtt:{title:`Kontrol portu (MQTT 8883)`,pass:`Erişilebilir — yazıcı kontrol bağlantılarını kabul ediyor.`,fail:`Port 8883 erişilemez. Yazıcı kapalı, farklı bir IP adresinde veya bir güvenlik duvarı engelliyor. Yazıcı IP'sini ve hiçbir şeyin port 8883'ü engellemediğini doğrulayın.`},port_ftps:{title:`Dosya aktarım portu (FTPS 990)`,pass:`Erişilebilir — baskı dosyaları gönderme çalışacak.`,warn:`Port 990 erişilemez. İzleme yine çalışabilir, ancak yazıcıya baskı gönderme başarısız olacak. Port 990'ın engellenmediğinden emin olun.`,warn_no_tls:`Port 990 açık, ancak yazıcının dosya hizmeti TLS el sıkışmasını tamamlamıyor. Baskı dosyaları, kapak görselleri ve timelapse videoları alınamadığı için arşivler boş kalır. Yazıcıyı yeniden başlatın — portun engelini kaldırmak işe yaramaz.`},external_storage:{title:`Gönderilen dosyaları harici depolamada sakla (kurulum adımı 4)`,pass:`Yazıcı bu seçeneğin açık olduğunu bildiriyor — gönderilen dosyalar SD kartta saklanacak ve arşivler küçük resim ve dilimleyici meta verileri içerecek.`,fail:`Yazıcı bu seçeneğin kapalı olduğunu bildiriyor. "Gönderilen dosyaları harici depolamada sakla" seçeneğini etkinleştirin — yeni donanım yazılımlarında (P2S 01.02 / Bambu Studio 2.6+) düğme yazıcının Baskı Ayarları'nda; eski sürümlerde Bambu Studio / OrcaSlicer'in Cihaz sekmesindedir. Bu seçenek olmadan, arşivlenen her baskıda küçük resim ve dilimleyici meta verisi olmayacak.`,skip:`Kontrol edilmedi — etkin bir MQTT bağlantısı gerekli. Bu ayarın yalnızca dilimleyicide bulunduğu eski dilimleyicilerde yazıcı bunu bildirmez, bu nedenle seçenek kapalı olsa bile bu kontrol geçer — kurulum adımı 4'ü manuel olarak doğrulayın.`,skip_unsupported_model:`Bu modelde SD yuvası var ancak seçeneği açmanın bir yolu yok — mevcut P1 serisi bellenim, Bambu Studio'da bu anahtarı göstermiyor ve yazıcının ekranı yok. Burada düzeltilecek bir şey yok; Bambu Lab bellenim desteği ekleyene kadar arşivlenen baskılarda küçük resimler ve dilimleyici meta verileri eksik olabilir.`,fail_no_media:`Seçenek açık, ancak yazıcı yuvasında kart veya bellek bildirmiyor, dolayısıyla gönderilen dosyaların gideceği bir yer yok. Bir tane takıp yeniden yazdırın — o zamana kadar arşivlenen her baskıda küçük resim ve dilimleyici meta verileri eksik olacak.`,warn_internal_storage:`Seçenek açık ve depolama takılı, ancak son baskı yine de Bambuddy'nin okuyamadığı dahili depolamaya gitti. H2 serisi, P2S ve X2D'de Bambu Studio'nun «Yazdır» düğmesi bu ayardan bağımsız olarak her zaman oraya gönderir. Baskılar adları ve süreleriyle arşivlenir, ancak küçük resim ve dilimleyici meta verileri olmadan. Eksiksiz arşivler için baskıları Bambuddy üzerinden başlatın, OrcaSlicer ile dilimleyin ya da Bambu Studio'da «Gönder» ile «Harici» seçip baskıyı sonrasında başlatın.`,warn_internal_history:`Seçenek açık ve depolama takılı, ancak son baskı yazıcıda zaten bulunan bir dosyadan çalıştı — ekranından yeniden baskı, Handy üzerinden başlatma ya da daha önce gönderilmiş bir dosya. Bu kitaplık, Bambuddy'nin okuyamadığı dahili depolamada durur ve o baskı için hiçbir şey gönderilmediğinden hiçbir ayar bunu değiştirmez. Adı ve süreleriyle yine arşivlenir, ama küçük resim ve dilimleyici meta verileri olmadan. Eksiksiz arşivler için baskıları Bambuddy'den başlatın ya da dilimleyiciden gönderin.`},port_rtsps:{title:`Kamera portu ({{protocol}} {{port}})`,pass:`Erişilebilir — kamera akışı çalışacak.`,warn:`Port {{port}} erişilemez. Canlı kamera görünümü çalışmayacak. Bu, baskıyı etkilemez.`},macos_local_network:{title:`macOS Yerel Ağ izni`,pass:`macOS, Bambuddy’nin yerel ağa erişmesine izin veriyor.`,warn_unsigned:`Bambuddy’yi çalıştıran Python’un kod imzası yok; bu yüzden macOS Yerel Ağ iznini bağlayacak bir kimlik bulamıyor ve yazıcıya giden tüm bağlantıları hata vermeden, sormadan sessizce düşürüyor. İmzalamayı yapan Bambuddy güncelleme betiğini (install/update_macos.sh) çalıştırın, ardından Bambuddy’yi yeniden başlatın. Yorumlayıcı: {{executable}}`,warn_permission:`Yazıcı açıksa ve bu adresten erişilebiliyorsa Sistem Ayarları > Gizlilik ve Güvenlik > Yerel Ağ bölümünü açıp Bambuddy’nin Python’unun etkin olduğundan emin olun. Etkin değilse macOS yerel bağlantıları sessizce düşürür; ayrıca Python güncellemesi eski izni geride bırakabilir.`},network_mode:{title:`Konteyner ağ modu`,genericRuntime:`bir konteyner`,pass:`{{runtime}} içinde ana bilgisayar ağıyla çalışıyor.`,warn:`Bambuddy, {{runtime}} içinde köprü ağıyla çalışıyor. Yazıcı keşfi ve Sanal Yazıcı ana bilgisayar ağı gerektirir — konteyneri ana bilgisayar ağıyla yeniden oluşturun (docker-compose için "network_mode: host", Podman için "--network=host").`,skip:`Bir konteyner içinde çalışmıyor — uygulanamaz.`,skip_unknown:`Bambuddy {{runtime}} içinde çalışıyor ancak ağ modu belirlenemedi. Yazıcı keşfi veya Sanal Yazıcı çalışmıyorsa konteyneri ana bilgisayar ağıyla yeniden oluşturun.`,skip_system_container:`Bambuddy, sanal makine gibi doğrudan yerel ağda bulunan bir {{runtime}} sistem konteyneri içinde çalışıyor — uygulanamaz.`},subnet:{title:`Ağ alt ağı`,pass:`Yazıcı ve Bambuddy aynı alt ağda.`,warn:`Yazıcı ({{printer_ip}}) ve Bambuddy ({{host_ip}}) farklı alt ağlarda. Alt ağlar arasında yönlendirme yapılandırılmazsa birbirlerine erişemeyebilirler.`,skip:`Alt ağ belirlenemedi — atlandı.`},mqtt_auth:{title:`Yazıcı kimlik bilgileri`,pass:`Yazıcı bağlantıyı kabul etti.`,fail:`Yazıcıya erişilebiliyor ancak Bambuddy ona bağlı değil. Büyük olasılıkla erişim kodu veya seri numarası yanlış — erişim kodu, Yalnızca LAN veya Geliştirici Modu her açılıp kapatıldığında değişir, bu yüzden yazıcı ekranından yeniden kopyalayın. Yeniden başlamakta olan veya eşzamanlı bağlantı sınırına ulaşmış bir yazıcı da aynı görünür.`,fail_auth_rejected:`Yazıcı, Bambuddy'nin kimlik bilgilerini reddetti. Erişim kodu veya seri numarası yanlış — erişim kodu, Yalnızca LAN veya Geliştirici Modu her açılıp kapatıldığında değişir. Yazıcı ekranından yeniden kopyalayın ve yazıcı ayarlarına kaydedin.`,skip:`Kontrol edilmedi — yazıcıya erişilemedi.`},developer_mode:{title:`LAN Geliştirici Modu`,pass:`Geliştirici Modu etkin.`,fail:`Yazıcıda Geliştirici Modu KAPALI. Yazıcının LAN ayarlarında etkinleştirin — ve OK ile onaylayın. Bu olmadan baskılar başlamayacak.`,skip:`Kontrol edilemedi — yazıcıya canlı bir bağlantı gerektirir.`},printer_publishing:{title:`Yazıcı durum yayını yapıyor`,pass:`Yazıcı durum güncellemelerini yayınlıyor — AMS, filamentler ve K profilleri dilimleyiciye doğru şekilde yansıtılacak.`,fail:`MQTT aracısı bağlantıyı kabul etti, ancak yazıcı hiç durum raporu yayınlamadı. Bu neredeyse her zaman yanlış ya da büyük/küçük harf hatalı bir seri numarasından kaynaklanır — device/<serial>/report konusu büyük/küçük harfe duyarlıdır. Yazıcı ayarlarındaki seri numarasını cihazın ekranındaki ile karşılaştırarak doğrulayın.`,skip:`Kontrol edilemedi — yazıcıya canlı bir bağlantı gerektirir.`}}},systemHealth:{sectionTitle:`Sistem Sağlığı`,sectionDescription:`Bir destek talebine dönüşmeden önce genellikle kendi başınıza düzeltebileceğiniz bilinen sorunlar için son günlükleri tarar.`,rescan:`Yeniden tara`,clean:`Son {{times}} günlük kaydında bilinen sorun bulunamadı.`,logUnavailable:`Dosya günlüğü devre dışı, bu nedenle günlükler taranamıyor. Bu kontrolü kullanmak için dosya günlüğünü etkinleştirin.`,learnMore:`Nasıl düzeltilir`,fixLabel:`Düzeltme:`,occurrences:`{{times}}× görüldü — son {{lastSeen}}'de`,category:{layer8:`Bunu düzeltebilirsiniz`,environment:`Ortam`,bug:`Lütfen bunu bildirin`},signature:{"ftp-auth-rejected":{name:`Yazıcı erişim kodunu reddetti`,cause:`Yazıcı dosya aktarım girişini reddetti. Erişim kodu yanlış veya Geliştirici Modu açılıp kapatıldıktan sonra değişti.`,fix:`Erişim kodunu yazıcı ekranından (LAN ayarları) yeniden kopyalayın ve Bambuddy'deki yazıcının ayarlarında güncelleyin.`},"ftp-connection-timeout":{name:`Dosya aktarım bağlantısı zaman aşımına uğradı`,cause:`Bambuddy yazıcının dosya aktarım portuna (FTPS 990) erişemedi. Port engellendi veya yazıcı kapalı ya da başka bir alt ağda.`,fix:`Bambuddy ile yazıcı arasında hiçbir şeyin port 990'ı engellemediğinden ve her ikisinin de aynı ağda olduğundan emin olun.`},"ftp-ssl-error":{name:`Güvenli dosya aktarım el sıkışması başarısız`,cause:`Yazıcının dosya hizmeti 990 numaralı bağlantı noktasında TLS olmadan yanıt verdi. Dosya sunucusu takılmış durumda: bu, güvenlik duvarı veya firmware sorunu değil, yazıcı kaynaklı bir arızadır.`,fix:`Yazıcıyı yeniden başlatın. O zamana kadar baskı dosyaları, kapak görselleri ve timelapse videoları alınamaz; baskının kendisi etkilenmez.`},"bambu-cloud-captcha":{name:`Bambu Cloud CAPTCHA istiyor`,cause:`Bambu'nun kötüye kullanım koruması bu ağı denetliyor, bu yüzden hiçbir Bambu Cloud oturum açma işlemi tamamlanamıyor. Bu, hesabınıza veya bu kuruluma değil, genel IP adresine bağlıdır.`,fix:`Bekleyin: genellikle birkaç saat içinde kalkar ve tekrarlanan denemeler süreyi uzatır. Bu sırada tarayıcı oturumundan alınan bir erişim belirteciyle bağlanın.`},"mqtt-connection-flapping":{name:`Yazıcı bağlantısı sürekli düşüyor`,cause:`Kontrol bağlantısı (MQTT 8883) tekrar tekrar bağlantısı kesiliyor ve yeniden bağlanıyor — genellikle zayıf bir ağ yolu veya kısmen engellenmiş bir port.`,fix:`Yazıcıdaki Wi-Fi sinyalini kontrol edin, kablolu bağlantı tercih edin ve port 8883'ün güvenilir bir şekilde erişilebilir olduğundan emin olun.`},"camera-connection-refused":{name:`Kamera akışına erişilemez`,cause:`Canlı kameraya RTSPS 322 portunda erişilemedi. Port engellendi veya yazıcıda kamera veya LAN canlı görünümü kapalı.`,fix:`Yazıcıda kamerayı ve LAN canlı görünümünü etkinleştirin ve port 322'nin engellenmediğinden emin olun. Bu, baskıyı etkilemez.`},"database-locked":{name:`Veritabanı yazma çekişmesi`,cause:`SQLite veritabanı yük altında "veritabanı kilitli" hatalarıyla karşılaşıyor — aynı anda birkaç yazıcı çalıştırırken yaygındır.`,fix:`Bambuddy'yi harici bir PostgreSQL veritabanına geçirin. Dokümantasyondaki PostgreSQL kılavuzuna bakın.`}}},vpDiagnostic:{title:`Kurulum kontrolü — {{name}}`,runButton:`Kurulum kontrolünü çalıştır`,running:`Kurulum kontrolü çalışıyor...`,runFailed:`Kurulum kontrolü çalıştırılamadı: {{error}}`,retry:`Tekrar çalıştır`,overall:{ok:`Tüm kontroller geçti — bu sanal yazıcı doğru şekilde kurulmuş.`,warnings:`Sanal yazıcı çalışmalı, ancak bazı şeyler dikkat gerektiriyor.`,problems:`Dilimleyicinin bu sanal yazıcıyı neden göremediğini veya kullanamadığını açıklayan sorunlar bulundu.`},check:{enabled:{title:`Sanal yazıcı etkin`,fail:`Bu sanal yazıcı kapatılmış. Keşfedilebilir hale getirmek için açın.`},running:{title:`Servisler çalışıyor`,fail:`Sanal yazıcı etkin ancak servisleri çalışmıyor. Bambuddy günlüğünü kontrol edin — bir bind IP çakışması veya bir izin hatası genellikle onları durdurur.`},bind_interface:{title:`Bind ağ arayüzü`,fail:`Bind arayüzü ayarlanmamış veya artık bu ana bilgisayarda mevcut değil. Bind Arayüzü açılır menüsünde mevcut bir arayüz seçin.`},access_code:{title:`Erişim kodu ayarlandı`,fail:`Erişim kodu ayarlanmamış. Dilimleyiciye burada ayarladığınız aynı 8 karakterli erişim kodunun verilmesi gerekir.`},target_printer:{title:`Hedef yazıcı`,fail:`Hedef yazıcı seçilmemiş. Proxy modu iletmek için gerçek bir yazıcıya ihtiyaç duyar.`,warn:`Hedef yazıcı şu anda çevrimdışı — yeniden bağlandığında proxy devam edecek.`},port_ftps:{title:`Dosya yükleme servisi (port {{port}})`,fail:`Bind IP'sinin {{port}} portunda hiçbir şey dinlemiyor, bu nedenle dilimleyici dosya yükleyemez. Bu arayüzde bir port çakışması genellikle nedendir.`},port_mqtt:{title:`Kontrol servisi (port {{port}})`,fail:`Bind IP'sinin {{port}} portunda hiçbir şey dinlemiyor, bu nedenle dilimleyici bağlanamaz veya durum gösteremez.`},port_bind:{title:`Keşif servisi (port {{port}})`,fail:`Bind IP'sinin {{port}} portunda hiçbir şey dinlemiyor, bu nedenle dilimleyicinin keşif el sıkışması başarısız oluyor.`},privileged_ports:{title:`Ayrıcalıklı bağlantı noktası bağlama`,fail:`{{port}} numaralı bağlantı noktası 1024 altındadır ve bu hizmetin onu bağlama izni yoktur; yukarıda hiçbir şeyin dinlememesinin nedeni budur. /etc/systemd/system/bambuddy.service dosyasına AmbientCapabilities=CAP_NET_BIND_SERVICE ekleyip yeniden başlatın veya "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))" komutunu çalıştırın. Docker kullanıyorsanız cap_add: [NET_BIND_SERVICE] ekleyin.`},certificate:{title:`TLS sertifikası`,pass:`Sertifika hazır. Bambuddy CA sertifikasının (yukarıda) dilimleyicinizin güven deposuna içe aktarıldığından emin olun.`,fail:`Bu sanal yazıcı için TLS sertifikası eksik. Bambuddy veri dizininin yazılabilir olduğunu kontrol edin.`}}},bugReport:{title:`Hata Bildir`,description:`Açıklama`,descriptionPlaceholder:`Ne ters gitti? Lütfen sorunu tanımlayın...`,email:`E-posta (isteğe bağlı)`,emailPlaceholder:`sizin@email.com`,emailPrivacy:`Sağlanırsa, e-postanız GitHub sorunundaki daraltılmış bir bölümde dahil edilecek, böylece bakımcı takip edebilir.`,screenshot:`Ekran Görüntüsü`,uploadOrPaste:`Bir görüntü yükleyin, yapıştırın veya sürükleyin`,dataCollectedSummary:`Rapora hangi veriler dahil edilir?`,dataIncluded:`Dahil:`,dataIncludedList:`Uygulama sürümü, OS, mimari, Python sürümü, veritabanı istatistikleri (yalnızca sayılar), yazıcı modelleri, nozul sayıları, firmware sürümleri, bağlantı durumu, entegrasyon durumu (Spoolman, MQTT, HA), hassas olmayan ayarlar, ağ arayüzü sayısı, Docker ayrıntıları, bağımlılık sürümleri.`,dataNeverIncluded:`Asla dahil edilmez:`,dataNeverIncludedList:`Yazıcı adları, seri numaraları, erişim kodları, parolalar, IP adresleri, e-posta adresleri, API anahtarları, belirteçler, webhook URL'leri, ana bilgisayar adları veya kullanıcı adları.`,submit:`Gönder`,startLogging:`Hata Ayıklama Kaydını Başlat`,stepEnableLogging:`Hata ayıklama kaydı etkin`,stepReproduce:`Sorunu şimdi yeniden oluşturun`,stepStopLogging:`Durdur ve raporu gönder`,stopAndSubmit:`Durdur ve Gönder`,maxDuration:`{{minutes}} dk sonra otomatik durur`,stoppingLogs:`Günlükler toplanıyor ve gönderiliyor...`,submitting:`Hata raporu gönderiliyor...`,submittingStepConnection:`Yazıcı bağlantı kontrolleri çalıştırılıyor`,submittingStepVirtualPrinters:`Sanal yazıcı kurulum kontrolleri çalıştırılıyor`,submittingStepLogScan:`Son günlüklerde bilinen sorunlar taranıyor`,submittingStepSubmit:`Rapor GitHub'a gönderiliyor`,submitSuccess:`Hata raporu başarıyla gönderildi!`,submitFailed:`Hata raporu gönderilemedi`,diagnosticChecking:`Yazıcı bağlantıları kontrol ediliyor...`,diagnosticHealthy:`Bağlantı kontrolü başarılı — yazıcılarınızda sorun bulunamadı.`,diagnosticSummary:`{{total}} yazıcıdan {{problems}} tanesinde bağlantı sorunu var`,diagnosticIntro:`Bir veya daha fazla yazıcının sorununuza neden olabilecek bir bağlantı sorunu var. Düzeltmeyi görmek için aşağıda bir yazıcıyı genişletin — bunu çözmek, hata raporu olmadan sorunu çözebilir. Yine de aşağıda bir rapor gönderebilirsiniz.`,logHealthSummary:`Günlüklerinizde bilinen sorunlar bulundu`,logHealthIntro:`Son günlükler bilinen sorunlarla eşleşiyor. Aşağıdaki düzeltmeleri kontrol edin — bunları çözmek, hata raporu olmadan sorununuzu çözebilir. Yine de aşağıda bir rapor gönderebilirsiniz.`,thankYou:`Teşekkürler!`,submitted:`Hata raporunuz gönderildi.`,viewIssue:`Sorunu Görüntüle`,closeKeepsRecording:`Sorunu yeniden oluştururken bu paneli kapatabilirsiniz; kayıt devam eder ve yeniden açtığınızda buraya dönersiniz.`,resumeRecording:`Hata raporu kaydediyor — {{elapsed}}. Tamamlamak için tıklayın.`,resumeReport:`Rapora devam et`,unexpectedError:`Beklenmedik bir hata oluştu`},failureDetection:{title:`AI Başarısızlık Algılama`,description:`Baskıları kendi barındırılan bir Obico ML API ile izle ve algılanan başarısızlıklara otomatik olarak yanıt ver.`,mlUrl:`Obico ML API URL'si`,mlUrlHint:`Kendi barındırılan Obico ml_api konteynerinizin temel URL'si (örn. http://192.168.1.10:3333).`,mlToken:`ML API Belirteci (isteğe bağlı)`,mlTokenPlaceholder:`Sunucu ML_API_TOKEN olmadan çalışıyorsa boş bırakın`,mlTokenHint:`Obico ml_api konteynerinizin ML_API_TOKEN ortam değişkeniyle eşleşmelidir. Konteyner belirteç olmadan çalışıyorsa boş bırakın.`,test:`Test`,testSuccess:`ML API erişilebilir ve sağlıklı.`,testSuccessTokenUnknown:`ML API erişilebilir ve sağlıklı. Belirteç doğrulanamadı.`,testFailed:`ML API'ye erişilemedi.`,sensitivity:`Hassasiyet`,sensitivityLow:`Düşük (daha az yanlış pozitif)`,sensitivityMedium:`Orta (dengeli)`,sensitivityHigh:`Yüksek (erken algıla, daha fazla yanlış pozitif)`,sensitivityHint:`Uyarıları ve başarısızlıkları tetikleyen güven eşiklerini ayarlar.`,action:`Algılanan başarısızlıkta eylem`,actionNotify:`Yalnızca bildir`,actionPause:`Baskıyı duraklat`,actionPauseOff:`Duraklat ve gücü kes`,pollInterval:`Sorgulama aralığı (saniye)`,pollIntervalHint:`Baskı yaparken her yazıcının ne sıklıkta kontrol edileceği. Minimum 5sn, maksimum 120sn.`,externalUrlMissing:`Harici URL ayarlanmamış.`,externalUrlHint:`ML API, kamera anlık görüntüsünü URL üzerinden alır. ML API konteyneri Bambuddy'ye erişebilsin diye Genel ayarlarda Harici URL'yi ayarlayın.`,perPrinterTitle:`İzlenen Yazıcılar`,perPrinterHint:`Algılama servisinin hangi yazıcıları izleyeceğini seçin.`,monitorAll:`Tüm bağlı yazıcıları izle`,statusTitle:`Durum`,serviceRunning:`Servis çalışıyor`,thresholds:`Düşük / Yüksek eşikler`,activePrinters:`Aktif baskılar`,noActivePrints:`Şu anda çalışan baskı yok.`,historyTitle:`Son Algılamalar`,noHistory:`Henüz algılama yok.`},makerworld:{title:`MakerWorld`,description:`Bambu Handy uygulamasına gitmeden — doğrudan Bambuddy'den içe aktarmak ve yazdırmak için bir MakerWorld model URL'si yapıştırın.`,pasteUrlHeader:`MakerWorld'den İçe Aktar`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… veya herhangi bir MakerWorld bağlantısını yapıştırın`,resolveButton:`Çöz`,signInRequiredTitle:`İndirme için Bambu Cloud girişi gerekli`,signInRequiredBody:`Model ayrıntılarına anonim olarak göz atabilirsiniz, ancak MakerWorld 3MF dosyalarını indirmek için bir Bambu Cloud hesabı gerektirir.`,signInExpiredTitle:`Bambu Cloud oturumu sona erdi`,signInExpiredBody:`Bambuddy oturumunuz açık kalmaya devam ediyor, ancak Bambu Lab kayıtlı belirteci artık kabul etmediği için indirmeler başarısız olacak. Bambu Cloud oturumunu yeniden açın.`,openCloudSettings:`Bulut ayarlarını aç`,untitledModel:`Adsız model`,byCreator:`{{name}} tarafından`,downloadsCount:`{{count}} indirme`,licensePrefix:`Lisans`,alreadyImported:`Zaten kütüphanede`,openOnMakerworld:`MakerWorld'de aç`,alreadyInLibrary:`Bu model zaten kütüphanenizde — Dosya Yöneticisi → MakerWorld'de bulun`,importSuccess:`{{filename}} içe aktarıldı — Dosya Yöneticisi → MakerWorld'e kaydedildi`,platesHeader:`Plakalar ({{count}})`,plateDefaultName:`Plaka {{n}}`,materialCount:`{{count}} filament`,amsRequired:`AMS gerekli`,slicedFor:`{{printer}} için dilimlendi`,alsoCompatible:`Ayrıca uyumlu olarak işaretlendi: {{printers}}`,importToLibrary:`Kaydet`,sliceIn:`Kaydet ve {{slicer}}'de Dilimle`,disclaimer:`MakerWorld entegrasyonu topluluk tarafından belgelenen API uç noktalarını kullanır. Bambuddy, MakerWorld veya Bambu Lab ile ilişkili veya onaylı değildir.`,lastImportSuccess:`Kütüphanenize içe aktarıldı`,lastImportAlreadyInLibrary:`Zaten kütüphanenizde`,viewInLibrary:`Dosya Yöneticisinde Görüntüle`,openInBambuStudio:`Bambu Studio'da Aç`,openInOrcaSlicer:`OrcaSlicer'da Aç`,importTo:`Dosya yöneticisine içe aktar`,recentImportsHeader:`Son içe aktarımlar`,phaseResolving:`Çözülüyor`,phaseDownloading:`İndiriliyor`,folderAuto:`MakerWorld (varsayılan)`,importAll:`Tümünü içe aktar`,importAllProgress:`{{current}}/{{total}} içe aktarılıyor`,openGallery:`Görüntü galerisini aç`,galleryPrev:`Önceki görüntü`,galleryNext:`Sonraki görüntü`,deleteImport:`Kütüphaneden kaldır`,importDeleting:`Kaldırılıyor…`,importDeleted:`Kütüphaneden kaldırıldı`,confirmDelete:`{{filename}} kütüphaneden kaldırılsın mı? Bu, yerel dosyayı siler ancak plaka MakerWorld'den yeniden içe aktarılabilir.`,errors:{resolveFailed:`O MakerWorld URL'si çözülemedi.`,downloadFailed:`İndirme başarısız. Lütfen tekrar deneyin.`,deleteFailed:`Dosya kütüphaneden kaldırılamadı.`}},gcodeViewer:{filamentSlot:`Filament {{n}}`,loading:`Takım yolu okunuyor…`,loadFailed:`Bu dosyanın G-code’u yüklenemedi.`,showTravel:`Boş hareketler`,topLayer:`Üst katman`,bottomLayer:`Alt katman`,noSource:`Önizlenecek dosya belirtilmedi.`,view:{filament:`Filament`,feature:`Öğe`,height:`Yükseklik`,width:`Genişlik`},feature:{wall:`Duvarlar`,sparseInfill:`Seyrek dolgu`,solidInfill:`Katı dolgu`,bridge:`Köprü / çıkıntı`,support:`Destek`,skirt:`Etek / kenarlık`,gapFill:`Boşluk dolgusu`,ironing:`Ütüleme`,primeTower:`Temizleme kulesi`},back:`Geri`,backToArchives:`Baskı Arşivlerine Dön`,backToFiles:`Dosya Yöneticisine Dön`,plates:`Plakalar`,plateN:`Plaka {{n}}`},libraryTrash:{title:`Çöp Kutusu`,headerButton:`Çöp`,headerTooltip:`Çöpe taşınan dosyaları görüntüle`,backToFiles:`Dosya Yöneticisine Dön`,subtitleAdmin:`Silinen dosyalar burada {{days}} gün kalır, ardından otomatik silinir. Bu görünüm tüm kullanıcılar için çöpteki dosyaları gösterir.`,subtitleUser:`Silinen dosyalar burada {{days}} gün kalır, ardından otomatik silinir.`,loading:`Çöp yükleniyor…`,loadError:`Çöp yüklenemedi.`,empty:`Çöp boş.`,summary:`{{count}} dosya · {{size}}`,emptyTrash:`Çöpü boşalt`,restore:`Geri Yükle`,purgeNow:`Şimdi sil`,autoPurgeIn:`{{when}} içinde otomatik silinir`,days:`gün`,retentionLabel:`Otomatik sil`,selectAll:`Tümünü seç`,selectOne:`{{filename}} seç`,selectionCount:`{{count}} seçildi`,bulkRestore:`Seçilenleri geri yükle`,bulkPurge:`Seçilenleri sil`,col:{filename:`Dosya`,folder:`Klasör`,size:`Boyut`,deleted:`Çöpe taşındı`,autoPurge:`Otomatik silinir`,owner:`Sahip`,actions:`İşlemler`},confirm:{purgeTitle:`Kalıcı olarak silinsin mi?`,purgeBody:`{{filename}} diskten silinecek ve geri yüklenemeyecek.`,emptyTitle:`Çöp boşaltılsın mı?`,emptyBody:`Tüm {{count}} dosya diskten silinecek. Bu geri alınamaz.`,bulkPurgeTitle:`Seçili dosyalar kalıcı olarak silinsin mi?`,bulkPurgeBody:`Seçili {{count}} dosya diskten silinecek ve geri yüklenemeyecek.`,cta:`Kalıcı olarak sil`},toast:{restored:`Dosya geri yüklendi.`,restoreFailed:`Dosya geri yüklenemedi.`,purged:`Dosya kalıcı olarak silindi.`,purgeFailed:`Dosya silinemedi.`,emptied:`{{count}} dosya çöpten silindi.`,emptyFailed:`Çöp boşaltılamadı.`,retentionSaved:`Otomatik silme {{days}} gün olarak ayarlandı.`,retentionFailed:`Saklama ayarı kaydedilemedi.`,bulkRestored:`{{count}} dosya geri yüklendi.`,bulkPurged:`{{count}} dosya silindi.`}},libraryPurge:{title:`Eski dosyaları temizle`,headerButton:`Eskileri temizle`,headerTooltip:`Eski dosyaları toplu olarak çöpe taşı`,description:`Kütüphanenizden eski dosyaları tek seferde temizleyin. Baskı geçmişi olan dosyalar son baskı tarihlerine göre, hiç yazdırılmamış dosyalar yükleme tarihlerine göre yaşlandırılır.`,ageLabel:`Şundan eski dosyaları taşı`,days:`gün`,includeNeverPrinted:`Hiç yazdırılmamış dosyaları dahil et`,effectsTitle:`Temizle'ye tıkladığınızda ne olur`,effect1:`Eşleşen dosyalar Çöp'e taşınır — henüz diskten silinmezler.`,effect2:`Saklama penceresi sona erene kadar Çöp'ten herhangi bir zamanda geri yükleyebilirsiniz.`,effect3:`Saklama sonrası, çöp süpürücü onları kalıcı olarak diskten kaldırır.`,effect4:`Harici (bağlı) klasörlerdeki dosyalar atlanır — Bambuddy asla sahibi olmadığı bayt'ları silmez.`,previewLoading:`Kaç dosyanın eşleştiği kontrol ediliyor…`,previewFailed:`Temizleme önizlenemedi.`,previewSummary:`{{count}} dosya · {{size}} çöpe taşınacak`,andMore:`…ve {{count}} daha`,warning:`Çöpe taşınan dosyalar saklama penceresi sona erene kadar depolama alanını kullanmaya devam eder. Diski hemen boşaltmak için sonradan Çöp'ü boşaltın.`,confirmCta:`{{count}} dosyayı çöpe taşı`,purging:`Çöpe taşınıyor…`,toast:{success:`{{count}} dosya çöpe taşındı.`,failed:`Dosyalar temizlenemedi.`}},libraryAutoPurge:{enableLabel:`Eski dosyaları otomatik temizle`,enableDescription:`Yönetici temizliğini günde bir kez çalıştırır. Dosyalar önce Çöp'e gider — hemen silinmezler.`,ageLabel:`Şundan eski dosyaları otomatik temizle`,ageDescription:`Minimum 7 gün, maksimum 10 yıl. Manuel Temizle düğmesiyle aynı yaş kuralını kullanır.`,days:`gün`,includeNeverPrinted:`Hiç yazdırılmamış dosyaları dahil et`,saveFailed:`Otomatik temizleme ayarları kaydedilemedi.`},archivePurge:{headerButton:`Eskileri temizle`,headerTooltip:`Eski arşivleri toplu olarak sil`,title:`Eski arşivleri temizle`,description:`Eski baskı geçmişini temizleyin. Her arşiv en son baskı tamamlamasına göre yaşlandırılır — bir arşivi yeniden yazdırmak yaşını yeniler, bu nedenle aktif çalışma asla temizlenmez.`,ageLabel:`Son şu kadar günde yazdırılmamış arşivleri sil`,days:`gün`,effectsTitle:`Temizle'ye tıkladığınızda ne olur`,effect1:`Eşleşen her arşiv listelerden gizlenir ve dosyaları diskten kaldırılır (3MF, küçük resim, zaman atlamalı video, kaynak 3MF, F3D tasarım dosyası, fotoğraflar).`,effect2:`Arşiv satırı veritabanında kalır, böylece Hızlı İstatistikler filament, süre, maliyet ve enerji katkısını korur — tek arşiv silme varsayılanı ile aynı.`,effect3:`Hızlı İstatistik katkısını da kaldırmak için aşağıdaki "Ayrıca istatistiklerden kaldır"ı işaretleyin (tek arşiv silme seçeneğiyle eşleşir). O yol geri alınamaz.`,effect4:`Bir arşivi yeniden yazdırmak yaş saatini yeniler, bu nedenle hâlâ kullandığınız arşivler güvendedir.`,purgeStatsLabel:`Ayrıca istatistiklerden kaldır`,purgeStatsHint:`Eşleşen arşivleri Hızlı İstatistiklerden (filament, süre, maliyet, enerji) düşürür. Bu olmadan, Hızlı İstatistikler her katkıyı korur ve yalnızca dosyalar diskten ayrılır.`,previewLoading:`Kaç arşivin eşleştiği kontrol ediliyor…`,previewFailed:`Temizleme önizlenemedi.`,previewSummary:`{{count}} arşiv · {{size}} kaldırılacak`,andMore:`…ve {{count}} daha`,warning:`Dosyalar diskten kaldırılır ve geri yüklenemez. Devam etmeden önce saklamak istediğiniz her şeyi indirin veya favoriye ekleyin.`,confirmCta:`{{count}} arşivi kaldır`,purging:`Kaldırılıyor…`,toast:{success:`{{count}} arşiv kaldırıldı.`,failed:`Arşivler temizlenemedi.`}},archiveAutoPurge:{enableLabel:`Eski arşivleri otomatik temizle`,enableDescription:`Günde bir kez, eşik içinde yazdırılmamışsa arşivleri listelerden gizler ve dosyalarını diskten kaldırır. Bir arşivi yeniden yazdırmak saati sıfırlar.`,ageLabel:`Son şu kadar günde yazdırılmamış arşivleri otomatik sil`,ageDescription:`Minimum 7 gün, maksimum 10 yıl. En son baskı tamamlamasına göre — bir arşivi yeniden yazdırmak yaşını yeniler. 3MF, küçük resim, zaman atlamalı video, kaynak 3MF, F3D ve fotoğrafları kaldırır.`,days:`gün`,purgeStatsLabel:`Ayrıca istatistiklerden kaldır`,purgeStatsDescription:`Etkinleştirildiğinde, günlük süpürücü her temizlenen arşivi de Hızlı İstatistiklerden (filament, süre, maliyet, enerji) düşürür. Varsayılan kapalı — Hızlı İstatistikler katkıyı korur, yalnızca dosyalar diskten ayrılır.`,runNow:`Arşivleri şimdi temizle`,saveFailed:`Otomatik temizleme ayarları kaydedilemedi.`},cameraTokens:{scope:{camera_stream:`Kamera akışı`,camwall:`Kamera duvarı`,overlay:`Yayın bindirmesi`},title:`Kamera API Belirteçleri`,navTitle:`Kamera API belirteçleri`,description:`Kamera akışını Home Assistant, Frigate, kiosk ekranları veya sabit bir adres gerektiren başka araçlara gömmek için uzun ömürlü belirteçler. Kapsam oluşturma sırasında seçilir; belirteç istediğiniz zaman iptal edilebilir.`,loading:`Yükleniyor…`,confirmRevoke:{title:`Bu belirteç iptal edilsin mi?`,body:`"{{name}}" kullanan herhangi bir cihaz hemen erişimini kaybedecek. Bu geri alınamaz.`,cancel:`İptal`,confirm:`İptal Et`},create:{scopeLabel:`Kapsam`,hintCameraStream:`Kamera akışı belirteci yalnızca kamera akışlarını ve anlık görüntüleri alabilir. Home Assistant, Frigate veya tek bir kamerayı gömen her şey için kullanın.`,hintCamWall:`Kamera duvarı belirteci, oturum açmadan bir ekranda /camwall adresini açar. Her yazıcının adını ve durumunu, ayrıca kamera akışlarını görebilir. Dosya adlarını, adresleri veya erişim kodlarını göremez.`,hintOverlay:`Yayın bindirmesi belirteci, oturum açmadan bir ekranda /overlay/{printerId} adresini açar — OBS veya herhangi bir canlı yayın için. Bir yazıcının kamera akışını ve ekranda gösterilen dosya adı dahil canlı yazdırma durumunu görebilir. Adresleri veya erişim kodlarını göremez.`,title:`Yeni belirteç oluştur`,nameLabel:`Belirteç adı`,namePlaceholder:`örn. Home Assistant`,daysLabel:`Sona erene kadar gün`,submit:`Oluştur`,hint:`Maksimum ömür 365 gün. Belirteç değeri oluşturmada yalnızca bir kez gösterilir — şimdi kopyalayın.`},created:{camWallUrlTitle:`Bu ekran için kamera duvarı adresi`,camWallUrlHint:`Bu adresi ekranda açın. Adresi okuyabilen herkes duvarı izleyebilir, bu yüzden onu bir anahtar gibi görün; ekranın erişimini kesmek için belirteci iptal edin.`,overlayUrlTitle:`OBS için bindirme adresi`,overlayUrlHint:`Bunu OBS'ye Tarayıcı Kaynağı olarak ekleyin. /overlay/1 içindeki sayıyı yazıcınızın numarasıyla değiştirin (Yazıcılar sayfasındaki adresinden). Adresi okuyabilen herkes yayını izleyebilir, bu yüzden onu bir anahtar gibi görün — erişimi kesmek için belirteci iptal edin.`,title:`Belirteç oluşturuldu — şimdi kopyalayın`,warning:`Bu, bu belirtecin görünür olacağı tek seferdir. Bu iletişim kutusunu kapattıktan sonra onu bir daha asla görüntüleyemezsiniz.`,copy:`Kopyala`,dismiss:`Kaydettim`},list:{scope:`Kapsam`,myTitle:`Belirteçlerim`,allTitle:`Tüm kullanıcılar (yönetici görünümü)`,empty:`Henüz belirteç yok.`,name:`Ad`,owner:`Sahip`,prefix:`Önek`,created:`Oluşturuldu`,expires:`Sona Erer`,lastUsed:`Son kullanım`,revoke:`İptal Et`,expired:`Süresi Doldu`},toast:{created:`Belirteç oluşturuldu`,createFailed:`Belirteç oluşturulamadı`,revoked:`Belirteç iptal edildi`,revokeFailed:`Belirteç iptal edilemedi`,loadFailed:`Belirteçler yüklenemedi`,copied:`Panoya kopyalandı`,copyFailed:`Kopyalama başarısız — manuel olarak seçip kopyalayın`}},forecast:{title:`Tahmin`,noSpools:`Aktif makara bulunamadı. Tahmin verisini görmek için envanterinize makara ekleyin.`,noUsageData:`Kullanım verisi mevcut değil — stok zaman çizelgesi öngörülemiyor.`,sku:`SKU`,material:`Malzeme`,stock:`Stok`,dailyRate:`Oran`,daysLeft:`Kalan Gün`,emptyBy:`Şu Tarihte Boş`,reorderBy:`Şu Tarihte Sipariş`,actions:`İşlemler`,trend:`Trend`,estimated:`Tahmini`,noData:`Veri yok`,timeframe:`Zaman Aralığı`,chartTitle:`Öngörülen Stok — İlk 5 Malzeme`,dashedLinesROP:`Kesik çizgiler = yeniden sipariş noktaları`,stockLevel:`Stok Seviyesi`,reorderPoint:`Yeniden Sipariş Noktası`,safetyMargin:`Güvenlik Marjı`,trendLegend:`Trend (geçmiş tabanlı, %95 servis seviyesi)`,estimatedLegend:`Tahmini (ağırlık farkı)`,noDataLegend:`Veri yok`,ropLabel:`ROP`,ssLabel:`SS`,safetyStockLegend:`Güvenlik stoku`,stockArrivalLegend:`Stok varışı`,stockoutLegend:`Stok tükenmesi`,alertCount_one:`{{count}} uyarı`,alertCount_other:`{{count}} uyarı`,order:`Sipariş`,save:`Kaydet`,cancel:`İptal`,settingsSaved:`Ayarlar kaydedildi`,failedSaveSettings:`Ayarlar kaydedilemedi`,globalLeadTimeSaved:`Global teslim süresi kaydedildi`,globalLeadTime:`Global teslim süresi`,globalLeadTimeHint:`Global teslim süresi tabanı — tüm SKU'lar için yeniden sipariş noktası hesaplamasında kullanılır`,skuLeadTimeOverride:`SKU Teslim Süresi Geçersiz Kılma`,skuLeadTimeHint:`0 = global teslim süresini kullan. Bu SKU için geçersiz kılmak için >0 ayarlayın.`,safetyMarginLabel:`Güvenlik Marjı`,effectiveLeadTime:`Etkili Teslim Süresi`,effectiveLeadTimeHint:`max(global {{global}}g, SKU {{sku}}g)`,reorderPointHint:`d̄ × LT + güvenlik marjı — stok bu seviyeye geldiğinde sipariş ver`,safetyMarginHint:`İstatistiksel güvenlik stoku (z=1.65 × σ × √LT) + kullanıcı tanımlı tampon`,safetyMarginHintDays:`İstatistiksel güvenlik stokunun üzerine eklenen tampon.{{approx}}`,safetyMarginHintDaysApprox:` ≈ mevcut oranda {{g}}g.`,safetyMarginHintG:`İstatistiksel güvenlik stokunun üzerine eklenen sabit ağırlık tamponu.{{approx}}`,safetyMarginHintGApprox:` ≈ mevcut oranda {{days}}g.`,individualSpools:`Bireysel makaralar`,labelWeight:`Etiket`,spoolCount_one:`{{count}} makara`,spoolCount_other:`{{count}} makara`,stockBreakRisk:`Stok tükenme riski`,stockBreakDetail:`{{days}}g kaldı, teslim süresi {{lt}}g.`,stockBreakBefore:`Yenileme öncesi stok tükenmesi`,reorderNow:`Şimdi sipariş ver`,reorderTriggerPassed:`Tetikleyici tarih {{date}} geçti.`,shoppingList:`Alışveriş Listesi`,shoppingListItems_one:`({{count}} öğe)`,shoppingListItems_other:`({{count}} öğe)`,shoppingListEmpty:`Alışveriş listesi boş. Öğe eklemek için herhangi bir satırdaki sepet simgesine tıklayın.`,addToCart:`Alışveriş listesine ekle`,alertsSnoozed:`Bu SKU için uyarıları sustur`,alertsEnabled:`Bu SKU için uyarıları aç`,addedToCart:`Alışveriş listesine eklendi`,failedAddItem:`Öğe eklenemedi`,listView:`Liste`,logisticsView:`Lojistik`,qty:`Adet`,weight:`Ağırlık`,leadTime:`Teslim Süresi`,expectedRestock:`Beklenen Yenileme`,status:`Durum`,note:`Not`,pending:`Beklemede`,purchased:`Satın Alındı`,received:`Teslim Alındı`,markPurchased:`Satın alındı olarak işaretle`,markReceived:`Teslim alındı olarak işaretle — makaraları Stok envanterine ekler`,resetToPending:`Beklemeye sıfırla`,remove:`Kaldır`,clearAll:`Tümünü temizle`,downloadCsv:`CSV`,addToCartTitle:`Alışveriş Listesine Ekle`,byQuantity:`Miktara Göre`,byDuration:`Süreye Göre`,numberOfSpools:`Makara sayısı`,lastHowManyDays:`Kaç gün dayanmalı?`,noUsageQty:`Kullanım verisi yok — miktar 1 olarak ayarlandı.`,noteOptional:`Not (isteğe bağlı)`,notePlaceholder:`örn. X projesi için, acil…`,addNSpools_one:`{{count}} makara ekle`,addNSpools_other:`{{count}} makara ekle`,onArrival:`Varışta`,stockBreakIn:`{{days}}g içinde stok tükenmesi.`,stockRunsOutBefore:`{{lt}}g teslim süresi dolmadan önce stok tükenir.`,atRate:`{{rate}}g/gün oranında size gerekli`,moreSpools_one:`{{count}} daha makara`,moreSpools_other:`{{count}} daha makara`,bridgeGap:`boşluğu kapatmak için.`,noReadAccess:`Envanter tahminlerini görüntüleme izniniz yok.`,noWriteAccess:`Tahmin ayarlarını değiştirme izniniz yok.`}}},ru:{translation:{nav:{printers:`Принтеры`,archives:`Архив`,queue:`Очередь печати`,stats:`Статистика`,profiles:`Профили`,maintenance:`Обслуживание`,projects:`Проекты`,inventory:`Филамент`,finance:`Финансы`,files:`Файловый менеджер`,makerworld:`MakerWorld`,notifications:`Уведомления`,settings:`Настройки`,system:`Система`,collapseSidebar:`Свернуть боковую панель`,expandSidebar:`Развернуть боковую панель`,update:`Обновить`,updateAvailable:`Доступно обновление: v{{version}}`,updateAvailableBanner:`Доступна версия {{version}}!`,viewUpdate:`Посмотреть обновление`,viewOnGithub:`Открыть на GitHub`,keyboardShortcuts:`Горячие клавиши (?)`,switchToLight:`Включить светлую тему`,switchToDark:`Включить тёмную тему`,switchToSystem:`Использовать системную тему`,smartSwitches:`Умные выключатели`,logout:`Выйти`,installApp:`Установить приложение`,installAppSuccess:`Bambuddy установлен`},common:{plusNMore:`ещё {{count}}`,save:`Сохранить`,saving:`Сохранение...`,cancel:`Отмена`,delete:`Удалить`,edit:`Изменить`,add:`Добавить`,close:`Закрыть`,confirm:`Подтвердить`,loading:`Загрузка...`,error:`Ошибка`,errorLoading:`Не удалось загрузить данные`,retry:`Повторить`,success:`Готово`,warning:`Предупреждение`,enabled:`Включено`,disabled:`Отключено`,yes:`Да`,no:`Нет`,on:`Вкл.`,off:`Выкл.`,all:`Все`,none:`Нет`,search:`Поиск`,filter:`Фильтр`,sort:`Сортировка`,refresh:`Обновить`,download:`Скачать`,upload:`Загрузить`,uploading:`Загрузка...`,uploadFailed:`Ошибка загрузки`,actions:`Действия`,status:`Состояние`,name:`Название`,description:`Описание`,date:`Дата`,time:`Время`,hours:`часов`,minutes:`минут`,seconds:`секунд`,days:`дней`,enable:`Включить`,disable:`Отключить`,permissions:`Разрешения`,noPrinters:`Принтеры не настроены`,noData:`Нет данных`,linkNotFound:`Ссылка не найдена`,required:`Обязательно`,optional:`Необязательно`,dismiss:`Закрыть`,apply:`Применить`,reset:`Сбросить`,export:`Экспорт`,import:`Импорт`,clear:`Очистить`,selectAll:`Выбрать все`,deselectAll:`Снять выделение`,noChange:`— Без изменений —`,unchanged:`Без изменений`,unassigned:`Не назначено`,unknown:`Неизвестно`,unknownError:`Неизвестная ошибка`,today:`Сегодня`,tomorrow:`Завтра`,asap:`Как можно скорее`,overdue:`Просрочено`,now:`Сейчас`,collapse:`Свернуть`,expand:`Развернуть`,previous:`Назад`,next:`Далее`,viewArchive:`Открыть архив`,viewInFileManager:`Открыть в файловом менеджере`,addedBy:`Добавил: {{username}}`,prints:`печатей`,more:`ещё +{{count}}`,ascending:`По возрастанию`,descending:`По убыванию`,back:`Назад`,copy:`Копировать`,copied:`Скопировано!`,printer:`Принтер`,remove:`Удалить`,type:`Тип`,print:`Печать`,rename:`Переименовать`,move:`Переместить`,create:`Создать`,duplicate:`Дублировать`,left:`Левый`,right:`Правый`,user:`Пользователь`,run:`Запустить`,running:`Выполняется...`},finance:{allTypes:`Все типы`,allCostCenters:`Все центры затрат`,title:`Финансы`,subtitle:`Кошелёк, личные операции и центры затрат`,noAccess:`У вас нет разрешения на просмотр финансовых данных.`,personalView:`Личный режим`,adminView:`Режим администратора`,createCostCenter:`Создать центр затрат`,adjustWallet:`Изменить кошелёк`,addManualPrint:`Добавить печать вручную`,manageMembers:`Управление участниками центра затрат`,currentBalance:`Личный баланс`,transactions:`Операции`,personalTransactions:`Личные операции`,costCenters:`Центры затрат`,availableForPrinting:`Доступен для назначения печати`,costCenterName:`Название`,budgetType:`Тип бюджета`,monthlyBudget:`Месячный бюджет`,totalBudget:`Общий бюджет`,noBudget:`Без бюджета`,create:`Создать`,selectUser:`Выберите пользователя`,transactionType:`Тип`,amount:`Сумма`,noCostCenter:`Без центра затрат`,descriptionOptional:`Описание (необязательно)`,applyAdjustment:`Применить изменение`,memberCanPrint:`Участник может печатать`,addMember:`Добавить участника`,canPrint:`Может печатать`,noMembers:`Участники не назначены.`,editCostCenter:`Изменить центр затрат`,myCostCenters:`Мои центры затрат`,costCentersHint:`Проверяйте бюджетные лимиты и контролируйте расходы`,noCostCenters:`Центры затрат не найдены.`,owner:`Владелец`,balance:`Баланс счёта`,unlimited:`Без ограничений`,budgetPolicyHint:`Баланс счёта используется для учёта затрат. Печать ограничивается только бюджетом выбранного центра затрат; без бюджета ограничений нет.`,budget:`Бюджет`,shared:`Общий`,cannotEditPrivateCostCenter:`Личные центры затрат нельзя редактировать здесь`,recentTransactions:`Недавние операции`,transactionsHint:`Фильтр по типу и центру затрат`,first:`Первая`,prev:`Предыдущая`,next:`Следующая`,last:`Последняя`,pageNumberOf:`Страница {{page}} из {{total}}`,noTransactions:`Нет доступных операций.`,noTransactionsForFilter:`Нет операций, соответствующих выбранным фильтрам.`,costCenter:`Центр затрат`,balanceAfter:`Баланс после операции`,userWithId:`Пользователь №{{id}}`,partial:`Частично`,editTransaction:`Изменить операцию`,selectCostCenter:`Выберите центр затрат...`,costCenterRequired:`Выберите центр затрат`,amountExample:`например, 4,00`,manualAdjustmentExample:`например, ручная корректировка`,userRequired:`Выберите пользователя`,amountInvalid:`Сумма должна быть допустимым числом`,createdCostCenter:`Центр затрат создан`,createCostCenterFailed:`Не удалось создать центр затрат`,transactionDeleted:`Операция удалена`,deleteTransactionFailed:`Не удалось удалить операцию`,transactionEdited:`Операция обновлена, бухгалтерская книга пересчитана`,editTransactionFailed:`Не удалось изменить операцию`,manualPrintCreated:`Расход на печать добавлен, бухгалтерская книга пересчитана`,manualPrintFailed:`Не удалось добавить печать вручную`,memberSaved:`Участник сохранён`,memberSaveFailed:`Не удалось сохранить участника`,memberRemoved:`Участник удалён`,memberRemoveFailed:`Не удалось удалить участника`,costCenterNameRequired:`Необходимо указать название центра затрат`,costCenterUpdated:`Центр затрат обновлён`,costCenterUpdateFailed:`Не удалось обновить центр затрат`,confirmDeleteCostCenter:`Удалить центр затрат «{{name}}»?`,costCenterDeleted:`Центр затрат удалён`,costCenterDeleteFailed:`Не удалось удалить центр затрат`,deleteTransactionConfirm:`Удалить эту операцию? Балансы будут пересчитаны автоматически.`,deposit:`Пополнение`,withdraw:`Списание`,printCharge:`Расход на печать`,deleteTransaction:`Удалить операцию`},printers:{title:`Принтеры`,addPrinter:`Добавить принтер`,addPreflight:{checking:`Проверка подключения...`,warning:`Некоторые проверки подключения не пройдены. Принтер может отображаться как отключённый. Проверьте результаты ниже, исправьте возможные проблемы или сохраните настройки как есть.`,back:`Назад`,saveAnyway:`Всё равно сохранить`},editPrinter:`Изменить принтер`,deletePrinter:`Удалить принтер`,printerName:`Название принтера`,serialNumber:`Серийный номер`,ipAddress:`IP-адрес / имя хоста`,accessCode:`Код доступа`,model:`Модель`,nozzleCount:`Количество сопел`,autoArchive:`Автоматически архивировать`,status:{available:`Доступен`,idle:`Ожидает`,printing:`Печать`,paused:`Приостановлен`,offline:`Не в сети`,problem:`Проблема`,error:`Ошибка`,finished:`Завершено`,unknown:`Неизвестно`},temperatures:{nozzle:`Сопло`,bed:`Стол`,chamber:`Камера`},heaterHistory:{title:`История нагрева`,openLabel:`Открыть историю нагрева`,nozzle:`Сопло`,nozzle2:`Сопло 2`,bed:`Стол`,chamber:`Камера`,error:`Не удалось загрузить историю`,empty:`Данные пока не записывались`},progress:`Выполнено {{percent}}%`,timeRemaining:`Осталось {{time}}`,deleteConfirm:`Удалить принтер «{{name}}»?`,maintenanceOk:`Обслуживание в норме`,maintenanceWarning:`{{count}} предупреждение`,maintenanceWarning_plural:`{{count}} предупреждений`,maintenanceDue:`Требуется: {{count}}`,maintenanceDue_plural:`Требуется: {{count}}`,sort:{name:`Название`,status:`Состояние`,model:`Модель`,location:`Расположение`,eta:`Время завершения`,ascending:`По возрастанию`,descending:`По убыванию`},cardSize:{small:`Маленькие карточки`,medium:`Средние карточки`,large:`Большие карточки`,extraLarge:`Очень большие карточки`},pageView:{openCamWallPage:`Открыть стену камер как отдельную страницу`,cards:`Карточки`,camWall:`Стена камер`},camWall:{page:{tokenRejected:`Эта ссылка на стену камер больше недействительна. Возможно, срок действия токена истёк или он был отозван.`,loadFailed:`Не удалось загрузить принтеры.`},noPrinters:`Нет принтеров для отображения`,noSignal:`Нет сигнала`,live:`Онлайн`,snap:`Снимок`,off:`Выкл.`,summary:`Онлайн: {{live}}, снимки: {{snap}}, всего: {{total}}`,layer:`Слой {{cur}}/{{total}}`,timeLeft:`Осталось {{time}}`,statusMode:{off:`Выкл.`,compact:`Компактный`,full:`Полный`},settings:{title:`Настройки стены камер`,maxLive:`Максимум онлайн-трансляций`,maxLiveHint:`Сколько камер одновременно показывать в реальном времени. Остальные будут обновляться снимками.`,snapshotInterval:`Интервал снимков, с`,snapshotIntervalHint:`Как часто обновлять снимки камер без онлайн-трансляции.`,statusOverlay:`Наложение состояния`,statusOverlayHint:`Компактный режим: только состояние. Полный: прогресс, слой и оставшееся время.`}},hideOffline:`Скрыть принтеры не в сети`,nextAvailable:`Ближайший доступный`,powerOn:`Включить питание`,offlinePrintersWithPlugs:`Принтеры не в сети с умными розетками`,noPrintersConfigured:`Принтеры пока не настроены`,search:`Поиск принтеров...`,noSearchResults:`Нет принтеров, соответствующих поиску или фильтрам`,filter:{allStatuses:`Все состояния`,allLocations:`Все расположения`},toolbar:{filters:`Фильтры`,view:`Вид`,actions:`Действия`},readyToPrint:`Готов к печати`,external:`Внешняя подача`,extL:`Внешняя, левое`,extR:`Внешняя, правое`,deleteArchives:`Удалить архивы печати`,noLabel:`Без метки`,printPreview:`Предпросмотр печати`,width:`Ширина`,height:`Высота`,noObjectsFound:`Объекты не найдены`,objectsLoadedOnPrintStart:`Объекты загрузятся после начала печати`,willBeSkipped:`Будет пропущен`,name:`Название`,serialCannotBeChanged:`Серийный номер нельзя изменить`,locationHelp:`Используется для группировки принтеров и фильтрации заданий в очереди`,wifiSignal:{veryWeak:`Очень слабый`,weak:`Слабый`,fair:`Средний`,good:`Хороший`,excellent:`Отличный`},maintenanceUpToDate:`Обслуживание выполнено — нажмите для просмотра`,maintenance:{title:`На обслуживании`,subtitle:`Принтер приостановлен: подключение отключено, задания из очереди не назначаются, уведомления не отправляются.`,pillLabel:`Обслуживание`,exitButton:`Завершить обслуживание`,menuEnter:`Перевести в режим обслуживания`,menuExit:`Выйти из режима обслуживания`,toastEntered:`Принтер {{name}} переведён в режим обслуживания`,toastExited:`Принтер {{name}} снова в работе`,confirmMidPrintTitle:`Перевести в режим обслуживания во время печати?`,confirmMidPrintMessage:`Принтер {{name}} сейчас печатает. Режим обслуживания отключит MQTT, отслеживание прогресса и уведомление о завершении этого задания. Продолжить?`,editFieldLabel:`Режим обслуживания`,editFieldHelp:`Отключает для принтера MQTT, назначение заданий из очереди и уведомления. Используйте при ремонте, параллельных установках Bambuddy или временной приостановке.`},chamberLightOn:`Включить подсветку камеры`,chamberLightOff:`Выключить подсветку камеры`,files:`Файлы`,browseFiles:`Открыть файлы принтера`,autoOffAfterPrint:`Автовыключение после печати`,autoOffExecuted:`Автовыключение выполнено — включите принтер для сброса состояния`,hmsErrors:`Ошибки HMS`,viewHmsErrors:`Показать ошибки HMS: {{count}}`,resume:`Продолжить`,pause:`Пауза`,stop:`Стоп`,camera:`Камера`,skipObject:`Пропустить объект`,reconnect:`Переподключить`,forceRefresh:`Принудительно обновить`,forceRefreshSuccess:`Запрошено обновление данных`,mqttDebug:`Отладка MQTT`,printerInformation:`Информация о принтере`,copyToClipboard:`Копировать`,copied:`Скопировано!`,state:`Состояние`,wifiSignalLabel:`Сигнал Wi‑Fi`,developerMode:`Режим разработчика`,enabled:`Включён`,disabled:`Отключён`,addedOn:`Добавлен`,sdCard:`SD-карта`,inserted:`Установлена`,notInserted:`Не установлена`,totalPrintHours:`Часов печати`,activeNozzle:`Активное сопло: {{nozzle}}`,amsSwitchInletTooltip:`Переключатель тракта филамента IN-{{inlet}} ({{side}}) — подаёт на оба сопла`,nozzleRack:`Держатель сопел`,nozzleDocked:`В держателе`,nozzleMounted:`Установлено`,nozzleActive:`Активно`,nozzleIdle:`Ожидание`,nozzleDiameter:`Диаметр`,nozzleType:`Тип`,nozzleStatus:`Состояние`,nozzleFilament:`Филамент`,nozzleWear:`Износ`,nozzleMaxTemp:`Макс. температура`,nozzleSerial:`Серийный номер`,nozzleHardenedSteel:`Закалённая сталь`,nozzleStainlessSteel:`Нержавеющая сталь`,nozzleTungstenCarbide:`Карбид вольфрама`,nozzleFlow:`Производительность`,nozzleHighFlow:`Высокопоточное`,nozzleStandardFlow:`Стандартное`,firmwareUpdate:`Обновление прошивки`,firmwareInstructions:`На сенсорном экране принтера откройте`,firmwareNav:`Перейдите в раздел`,settings:`Настройки`,firmware:`Прошивка`,discoverPrinters:`Найти принтеры`,searching:`Поиск...`,manualEntry:`Добавить вручную`,addFromCloud:`Добавить из облака`,toast:{printerDeleted:`Принтер удалён`,missingSpoolAssignment:`На принтере {{printer}} началась печать. Не назначены катушки для слотов: {{slots}}`,killSwitchTriggered:`Аварийный выключатель биллинга остановил несанкционированную печать на {{printer}}: {{filename}}`,billingChargeFailed:`Не удалось начислить стоимость {{filename}} на {{printer}}. Резерв бюджета сохранён; проверьте журналы сервера.`,assignmentVerified:`Филамент загружен в слот {{slot}} ({{printer}})`,assignmentVerifiedNoKprofile:`Слот {{slot}} на {{printer}} загружен, но профиль калибровки потока (K-профиль) не применён`,assignmentNotConfirmed:`Не удалось подтвердить назначение слота {{slot}} на {{printer}} — проверьте слот AMS`,printerAdded:`Принтер добавлен`,printerUpdated:`Настройки принтера обновлены`,failedToDelete:`Не удалось удалить принтер`,failedToAdd:`Не удалось добавить принтер`,connectionFailedNotAdded:`Не удалось подключиться к принтеру. Проверьте IP-адрес, серийный номер и код доступа, а также убедитесь, что включён режим «Только локальная сеть». Принтер не добавлен.`,failedToUpdate:`Не удалось обновить настройки принтера`,commandSent:`Команда отправлена`,failedToSendCommand:`Не удалось отправить команду`,turnedOn:`Питание {{name}} включено`,failedToPowerOn:`Не удалось включить {{name}}`,scriptTriggered:`Сценарий запущен`,printStopped:`Печать остановлена`,printPaused:`Печать приостановлена`,printResumed:`Печать продолжена`,referenceDeleted:`Эталон удалён`,detectionAreaSaved:`Область обнаружения сохранена`,failedToRunScript:`Не удалось запустить сценарий`,failedToStopPrint:`Не удалось остановить печать`,failedToPausePrint:`Не удалось приостановить печать`,failedToResumePrint:`Не удалось продолжить печать`,failedToControlChamberLight:`Не удалось изменить состояние подсветки камеры`,failedToSetSpeed:`Не удалось изменить скорость печати`,failedToUpdateSetting:`Не удалось изменить настройку`,failedToSkipObjects:`Не удалось пропустить объекты`,failedToRereadRfid:`Не удалось повторно считать RFID`,failedToCheckPlate:`Не удалось проверить пластину`,failedToUpdateLabel:`Не удалось обновить метку`,failedToDeleteReference:`Не удалось удалить эталон`,failedToSaveDetectionArea:`Не удалось сохранить область обнаружения`,plateCheckEnabled:`Проверка пластины включена`,plateCheckDisabled:`Проверка пластины отключена`,calibrationSaved:`Калибровка сохранена`,calibrationFailed:`Не удалось выполнить калибровку`,rfidRereadInitiated:`Запущено повторное считывание RFID`,loadInitiated:`Загрузка филамента…`,unloadInitiated:`Выгрузка филамента…`,failedToLoad:`Не удалось загрузить филамент`,failedToUnload:`Не удалось выгрузить филамент`},connection:{connected:`Подключён`,offline:`Не в сети`},plateStatus:{markCleared:`Отметить пластину как очищенную`,cleared:`Пластина очищена`,notCleared:`Пластина не очищена`,inUse:`Пластина используется`},queue:{inQueue:`В очереди: {{count}} задание`,inQueue_plural:`В очереди: {{count}} заданий`},controls:`Управление`,rfid:{reread:`Повторно считать RFID`},ams:{load:`Загрузить`,unload:`Выгрузить`,feedTitle:`В какое сопло загрузить {{slot}}?`,feedPrompt:`Filament Track Switch может направить этот слот в любой из хотэндов. Выберите, в какой подавать.`,feedLeft:`Левое сопло`,feedRight:`Правое сопло`,feedAlreadyLoaded:`Уже загружено`,switchNotReady:`Filament Track Switch ещё не настроен. Назначьте каждой AMS вход на принтере и повторите попытку.`},bedJog:{limitWarning:`При ручном перемещении ограничения хода не контролируются: из-за ошибки прошивки Bambu программные концевики игнорируются для удалённых команд. Перемещайте осторожно, чтобы избежать столкновения.`,title:`Ручное перемещение`,bed:`Стол`,step:`Шаг (мм)`,up:`Поднять стол`,down:`Опустить стол`,toolheadUp:`Поднять печатающую голову`,toolheadDown:`Опустить печатающую голову`,disabledWhilePrinting:`Недоступно во время печати`,notHomedTitle:`Принтер не выполнил парковку по осям`,notHomedMessage:`После последней печати принтер не выполнял Home. Сначала запустите автоматическую парковку для безопасного позиционирования (парковка печатающей головы и поиск нуля по X, Y и Z) либо продолжите перемещение — программные концевики будут отключены.`,homeZ:`Автопарковка`,moveAnyway:`Всё равно переместить`,homingStarted:`Выполняется автопарковка…`},permission:{noAdd:`У вас нет разрешения на добавление принтеров`,noEdit:`У вас нет разрешения на изменение принтеров`,noDelete:`У вас нет разрешения на удаление принтеров`,noControl:`У вас нет разрешения на управление принтерами`,noFiles:`У вас нет разрешения на доступ к файлам принтера`,noAmsRfid:`У вас нет разрешения на повторное считывание RFID AMS`,noSmartPlugControl:`У вас нет разрешения на управление умными розетками`,noCamera:`У вас нет разрешения на просмотр камер`},modal:{addTitle:`Добавить принтер`,editTitle:`Изменить принтер`,myPrinter:`Мой принтер`,selectModel:`Выберите модель…`,locationGroup:`Расположение / группа (необязательно)`,locationPlaceholder:`например: Мастерская, Офис, Подвал`,autoArchiveLabel:`Автоматически архивировать завершённые печати`,fromPrinterSettings:`Из настроек принтера`,modelOptional:`Модель (необязательно)`,saveChanges:`Сохранить изменения`},skipObjects:{tooltip:`Пропустить объекты`,onlyWhilePrinting:`Пропуск объектов доступен только во время печати`,requiresMultiple:`Для пропуска требуется не менее двух объектов`,title:`Пропустить объекты`,matchIdsInfo:`Сопоставьте идентификаторы с экраном принтера`,printerShowsIds:`На экране принтера отображаются идентификаторы объектов на пластине`,skipSelected:`Пропустить выбранные`,skipping:`Пропуск…`,noObjectsSelected:`Объекты не выбраны`,selectObjectsToSkip:`Выберите объекты, которые нужно исключить из текущей печати`,skipped:`пропущен`,objectsSkipped:`Объекты пропущены`,activeCount:`Активно: {{count}}`,waitForLayer:`Пропуск объектов доступен со второго слоя (сейчас слой {{layer}})`,skip:`Пропустить`,confirmTitle:`Пропустить объект?`,confirmMessage:`Пропустить объект «{{name}}»? Это действие нельзя отменить.`,confirmAllMessage:`Выбраны все оставшиеся объекты. Это остановит задание печати. Продолжить?`,confirmMultipleMessage:`Пропустить выбранные объекты ({{count}})? Это действие нельзя отменить.`},confirm:{deleteTitle:`Удалить принтер`,deleteMessage:`Удалить принтер «{{name}}»? Все параметры подключения будут удалены.`,deleteArchivesNote:`Вся история печати этого принтера будет удалена безвозвратно.`,keepArchivesNote:`История печати сохранится, но больше не будет связана с этим принтером.`,stopTitle:`Остановить печать`,stopMessage:`Остановить текущую печать на принтере «{{name}}»? Задание будет отменено.`,stopButton:`Остановить печать`,pauseTitle:`Приостановить печать`,pauseMessage:`Приостановить текущую печать на принтере «{{name}}»?`,pauseButton:`Приостановить печать`,resumeTitle:`Продолжить печать`,resumeMessage:`Продолжить печать на принтере «{{name}}»?`,resumeButton:`Продолжить печать`,powerOnTitle:`Включить принтер`,powerOnMessage:`Включить питание принтера «{{name}}»?`,powerOnButton:`Включить питание`,powerOffTitle:`Выключить принтер`,powerOffMessage:`Выключить питание принтера «{{name}}»?`,powerOffWarning:`ВНИМАНИЕ: принтер «{{name}}» сейчас печатает. Выключение питания прервёт печать и может повредить принтер. Продолжить?`,powerOffButton:`Выключить питание`,haToggleTitle:`Переключить «{{name}}»`,haToggleMessage:`Переключить сущность Home Assistant {{entity}}? Если она сейчас включена, питание может отключиться.`,haToggleWarning:`ВНИМАНИЕ: принтер «{{name}}» сейчас печатает. Переключение {{entity}} может отключить питание и прервать печать. Продолжить?`,haToggleButton:`Переключить`},bulk:{select:`Выбрать`,selectAll:`Выбрать все`,selectByLocation:`Выбрать по расположению`,selected:`Выбрано: {{count}}`,actions:{stop:`Стоп`,pause:`Пауза`,resume:`Продолжить`,clearPlate:`Освободить стол`,clearHMS:`Очистить уведомления`},confirm:{stopTitle:`Остановить печати: {{count}}`,stopMessage:`Активные печати на {{count}} принтерах будут отменены. Это действие нельзя отменить.`,stopButton:`Остановить все`,pauseTitle:`Приостановить печати: {{count}}`,pauseMessage:`Активные печати на {{count}} принтерах будут приостановлены.`,pauseButton:`Приостановить все`,clearPlateTitle:`Освободить столы: {{count}}`,clearPlateMessage:`Столы на {{count}} принтерах будут отмечены как свободные; после этого могут запуститься задания из очереди.`,clearPlateButton:`Освободить все`},success:`Действие «{{action}}» выполнено на {{count}} принтерах`,partial:`Успешно: {{succeeded}}, с ошибкой: {{failed}}`,noneApplicable:`Ни один из выбранных принтеров не находится в подходящем состоянии`,selectByState:`Выбрать по состоянию`},discovery:{title:`Поиск принтеров`,searching:`Поиск…`,scanning:`Сканирование…`,scanProgress:`Сканирование: {{scanned}}/{{total}}`,foundPrinters:`Найдено принтеров: {{count}}`,noPrintersFound:`Принтеры не найдены`,noPrintersFoundSubnet:`В указанной подсети принтеры не найдены.`,noPrintersFoundNetwork:`Принтеры в сети не найдены.`,allConfigured:`Все найденные принтеры уже настроены.`,alreadyAdded:`Уже добавлен`,select:`Выбрать`,manualEntry:`Добавить вручную`,addFromCloud:`Добавить из облака`,subnetToScan:`Подсеть для сканирования`,dockerNote:`Обнаружен Docker. Укажите подсеть принтера в формате CIDR. В docker-compose.yml требуется network_mode: host.`,scanSubnet:`Сканировать подсеть`,discoverNetwork:`Найти принтеры в сети`,scanningSubnet:`Поиск принтеров Bambu в подсети…`,scanningNetwork:`Сканирование сети…`,serialRequired:`Требуется серийный номер`,unknown:`Неизвестно`,failedToStart:`Не удалось запустить поиск`,customSubnetOption:`Другая подсеть…`,customSubnetLabel:`Другая подсеть (CIDR)`,customSubnetNote:`Используйте другую подсеть, если принтер находится в иной сети. Порты FTP (990) и MQTT (8883) должны быть доступны через маршрутизатор.`},drying:{start:`Начать сушку`,stop:`Остановить сушку`,temperature:`Температура`,duration:`Продолжительность`,hours:`ч`,timeRemaining:`осталось {{time}}`,active:`Сушка`,targetSummary:`{{filament}} при {{temp}} °C`,notSupported:`Сушка не поддерживается`,powerRequired:`Подключите адаптер питания AMS, чтобы включить сушку`,cannotDryNow:`AMS сейчас не может начать сушку`,startingDrying:`Запуск сушки...`,toastCommandSent:`Команда сушки отправлена`,toastStopped:`Сушка остановлена`,toastNotStarted:`Принтер принял команду, но AMS не начал сушку. Убедитесь, что адаптер питания AMS подключён, а принтер не занят.`,screenOnly:`На этом принтере управлять сушкой AMS можно только с экрана самого принтера (ограничение Bambu)`,stoppingDrying:`Остановка сушки...`,rotateTray:`Вращать катушку во время сушки`,rotateUnavailableReason:`Недоступно: слот этого AMS сейчас подаёт филамент в печатающую головку. Катушка зафиксирована подающей трубкой и не может вращаться. Сначала выгрузите филамент.`,startMode:`Время начала`,modeNow:`Сейчас`,modeDelay:`После задержки`,modeAtTime:`По времени`,schedule:`Запланировать`,scheduledFor:`Сушка запланирована на {{time}}`,scheduledAsap:`Сушка запланирована (ожидание принтера)`,cancelScheduled:`Отменить запланированную сушку`,scheduleFailed:`Не удалось запланировать сушку`,retractFilament:`Извлеките филамент из выхода AMS, чтобы начать сушку`,waitingAmsNotFound:`Ожидание обнаружения AMS`,waitingOffline:`Ожидание подключения принтера`,waitingPrinterBusy:`Ожидание освобождения принтера`,waitingAlreadyDrying:`Ожидание завершения текущего цикла сушки`,waitingInterrupted:`Прервано, возобновится, когда принтер освободится`,scheduleFailedReason:`Не удалось выполнить запланированную сушку: {{reason}}`,scheduleFailedUnknown:`Неизвестная ошибка`,dismissFailed:`Скрыть`},amsBackup:{titleOn:`Резервный филамент AMS включён. Нажмите, чтобы отключить.`,titleOff:`Резервный филамент AMS выключен. Нажмите, чтобы включить.`,titleUnknown:`Состояние резервного филамента AMS недоступно для этого принтера.`,toastEnabled:`Резервный филамент AMS включён`,toastDisabled:`Резервный филамент AMS отключён`,modalTitle:`Резервный филамент AMS`,modalHelp:`Когда активный слот опустеет, принтер по очереди использует подходящие слоты с тем же профилем и цветом в указанном порядке.`,modalNoSlots:`Филамент не загружен.`,modalNoPairs:`Резервных пар нет: ни у двух слотов не совпадают профиль филамента и цвет.`,extruderRightShort:`П`,extruderLeftShort:`Л`,stateOn:`Включено`,stateOff:`Отключено`,stateUnknown:`Не поддерживается этим принтером`},activeJobSlot:{title:`Этот слот используется как филамент {{n}} в текущей печати`,ariaLabel:`Слот {{n}} текущей печати`},expectedSlot:{title:`Принтер ожидает филамент в этом слоте`,ariaLabel:`Ожидаемый слот филамента {{n}}`,label:`{{ams}} · Слот {{slot}}`,external:`Внешняя катушка`},filaments:`Филаменты`,externalSpool:{hide:`Скрыть внешнюю катушку`,show:`Показать внешнюю катушку`},openCameraOverlay:`Открыть камеру поверх интерфейса`,openCameraWindow:`Открыть камеру в новом окне`,firmwareUpdateAvailable:`Доступно обновление прошивки: {{current}} → {{latest}}`,firmwareUpToDate:`Прошивка {{version}} — актуальная версия`,firmwareUpdateButton:`Обновить`,plateDetection:{noPermission:`У вас нет прав на изменение настроек принтера`,enabledClick:`Проверка пластины включена — нажмите, чтобы отключить`,disabledClick:`Проверка пластины отключена — нажмите, чтобы включить`,manageCalibration:`Управление калибровкой проверки пластины`,calibrationRequired:`Требуется калибровка`,calibrationInstructions:`Убедитесь, что печатная пластина <strong>полностью пустая</strong>, затем нажмите «Калибровать».`,calibrationDescription:`При калибровке сохраняется эталонное изображение пустой пластины. При последующих проверках система сравнивает снимок с эталоном и обнаруживает посторонние объекты.`,calibrationTip:`<strong>Совет:</strong> можно сохранить до 5 калибровок для разных пластин. При проверке система автоматически выберет наиболее подходящий эталон.`,plateEmpty:`Пластина выглядит пустой`,objectsDetected:`На пластине обнаружены объекты`,confidence:`Уверенность`,difference:`Различие`,analysisPreview:`Предпросмотр анализа:`,analysisLegend:`Зелёная рамка — область обнаружения, красная заливка — отличия от калибровочного снимка`,savedReferences:`Сохранённые эталоны ({{count}}/{{max}})`,deleteReference:`Удалить эталон`,labelPlaceholder:`Метка...`,clickToEdit:`{{label}} — нажмите для изменения`,clickToAddLabel:`Нажмите, чтобы добавить метку`},speed:{title:`Скорость печати`,silent:`Тихий (50%)`,standard:`Стандартный (100%)`,sport:`Спортивный (124%)`,ludicrous:`Безумный (166%)`},airduct:{title:`Режим воздуховода`,cooling:`Охлаждение`,heating:`Нагрев`},noSdCard:`Нет SD-карты`,door:{open:`Открыта`,closed:`Закрыта`},fans:{partCooling:`Вентилятор обдува модели`,auxiliary:`Дополнительный вентилятор`,leftAuxiliary:`Левый дополнительный вентилятор`,exhaust:`Вытяжка`,chamber:`Вентилятор камеры`},clickToViewHmsErrors:`Нажмите, чтобы посмотреть ошибки HMS`,aiDetection:{safe:`Безопасно`,warning:`Предупреждение`,failure:`Сбой`,idle:`Ожидает`,error:`Не проверяется`,unknown:`Запуск`,tooltipError:`Обнаружение сбоев с помощью ИИ не проверяет эту печать: {{reason}} - нажмите для подробностей`,tooltipUnknown:`Обнаружение сбоев с помощью ИИ: ожидание первого результата - нажмите для подробностей`,errorHint:`Эта печать не проверяется. Обнаружение возобновится автоматически после устранения проблемы, указанной ниже.`,tooltip:`Обнаружение сбоев с помощью ИИ: {{status}} (оценка {{score}}) - нажмите для подробностей`,tooltipIdle:`Обнаружение сбоев с помощью ИИ включено - мониторинг начнётся со следующей печати - нажмите для подробностей`,modalTitle:`Обнаружение сбоев с помощью ИИ - {{name}}`,currentStatus:`Статус`,score:`Оценка`,framesAnalyzed:`Проанализировано кадров`,idleHint:`Сейчас ни одна печать не отслеживается. Мониторинг начнётся автоматически со следующей печати.`,lastError:`Последняя ошибка`,openSettings:`Открыть настройки`},estimatedCompletion:`Расчётное время завершения`,plateNumber:`Пластина {{number}}`,slotOptions:`Параметры слота`,amsPopup:{friendlyName:`Имя AMS`,friendlyNamePlaceholder:`Например, левый AMS`,serialNumber:`Серийный номер`,firmwareVersion:`Прошивка`,save:`Сохранить`,clear:`Очистить`,noEditPermission:`У вас нет прав на переименование модулей AMS`},firmwareModal:{title:`Обновление прошивки`,titleUpToDate:`Сведения о прошивке`,currentVersion:`Текущая:`,latestVersion:`Последняя:`,releaseNotes:`Примечания к выпуску`,checkingPrereqs:`Проверка условий...`,sdCardReady:`SD-карта готова. Нажмите ниже, чтобы загрузить прошивку.`,uploadedSuccess:`Прошивка загружена на SD-карту!`,applyInstructions:`Чтобы установить обновление на принтер:`,step1:`На экране принтера откройте <strong>Настройки</strong>`,step2:`Перейдите в раздел <strong>Прошивка</strong>`,step3:`Выберите <strong>Обновить с SD-карты</strong>`,step4:`Обновление займёт 10–20 минут`,done:`Готово`,starting:`Запуск...`,uploadFirmware:`Загрузить прошивку`,uploadFailed:`Не удалось начать загрузку: {{error}}`,uploadedToast:`Прошивка загружена. Запустите обновление с экрана принтера.`,availableVersions:`Доступные версии`,usable:`Доступна`,unavailable:`Недоступна`,installed:`Установлена`,newerBadge:`новее`,olderBadge:`старее`,currentBadge:`текущая`},accessCodePlaceholder:`Оставьте пустым, чтобы сохранить текущий`,roi:{title:`Область обнаружения (ROI)`,xStart:`Начало X`,yStart:`Начало Y`,width:`Ширина`,height:`Высота`,instruction:`Настройте область обнаружения так, чтобы она охватывала печатную пластину. Зелёная рамка в предпросмотре показывает текущую область.`},developerModeWarning:`Режим LAN для разработчиков не включён на: {{names}}. Некоторые функции могут не работать.`,howToEnable:`Как включить`,incompatibleFile:`Файл подготовлен для {{slicedFor}}, а выбранный принтер — {{printerModel}}`,dropNotPrintable:`Для печати подходят только файлы .gcode и .gcode.3mf`,dropToPrint:`Перетащите файл для печати`,dropToQueue:`Перетащите файл в очередь`},archives:{media:{title:`Видео печати`,download:`Скачать видео печати`,searching:`Поиск видео на принтере…`,searchFailed:`Не удалось проверить видео на принтере.`,none:`Для этой печати не найдены таймлапсы или фрагменты IP-камеры.`,attachedTimelapse:`Прикреплённый таймлапс`,printerFiles:`Файлы, оставшиеся на принтере`,downloadSelected:`Скачать выбранное`,printerMissing:`Принтер больше не настроен`,timelapseUnavailable:`Не удалось прочитать каталог таймлапсов`,ipcamUnavailable:`Не удалось прочитать каталог IP-камеры`},title:`Архив печати`,no3mfBanner:{title:`Некоторые последние задания сохранены без миниатюр`,body:`Слайсер не оставил файл .gcode.3mf на SD-карте принтера, поэтому Bambuddy не смог получить миниатюру и метаданные слайсера. Обычно это происходит, если в слайсере отключена настройка «Сохранять отправленные файлы во внешнем хранилище» (вкладка «Устройство» в Bambu Studio / OrcaSlicer).`,docsLink:`См. шаг 4 установки`,docsLinkInternalStorage:`Почему так происходит`,titleInternalStorage:`Некоторые недавние печати остались во внутренней памяти принтера`,bodyInternalStorage:`Bambu Studio сохранил нарезанный файл во внутренней памяти принтера, а не на карте, поэтому Bambuddy было нечего читать по FTP. На серии H2, P2S и X2D кнопка «Печать» всегда делает так: выбор есть только в «Отправить», и там по умолчанию тоже «Кэш». Эти печати по-прежнему архивируются с именем и временем, только без миниатюры и метаданных слайсера. Чтобы архивы были полными, запускайте печать из Bambuddy или нарезайте в OrcaSlicer, либо в Bambu Studio используйте «Отправить» с «Внешним накопителем», а печать запускайте после этого. Во всех случаях в принтере нужна карта или флешка.`,titleNoExternalStorage:`Некоторые недавние печати не удалось архивировать — в принтере нет накопителя`,bodyNoExternalStorage:`Принтер не видит ни карты, ни флешки в слоте, поэтому нарезанному файлу некуда было попасть, а Bambuddy нечего читать. Вставьте накопитель, и следующая печать будет заархивирована полностью.`,titleInternalHistory:`Некоторые недавние печати запущены из файла, который уже был на принтере`,bodyInternalHistory:`Эти печати шли из собственной библиотеки принтера — повторная печать с его экрана, запуск из Handy или файл, отправленный раньше и напечатанный позже. Bambuddy читает файлы печати по FTP, а он отдаёт только карту или флешку, тогда как принтер держит эту библиотеку в области, куда FTP не достаёт, — читать 3MF было негде. Настройки слайсера тут ничего не меняют: для этих печатей ничего не отправлялось. Они по-прежнему архивируются с именем и временем, а в «Редактировании архива» израсходованный филамент можно указать вручную. Чтобы архив был полным, запускайте печать из Bambuddy или из своего слайсера.`,titleFtpsCooloff:`Некоторые недавние печати не удалось заархивировать — принтер отклонил файловое соединение`,bodyFtpsCooloff:`Bambuddy открыл порт передачи файлов принтера (FTPS 990), и принтер ответил чем-то, что не является TLS, поэтому прочитать с него ничего не удалось. Эти печати всё равно сохранены в архиве с названием и временем, только без миниатюры и метаданных слайсера. Это не настройка слайсера и не то, что вы меняли: те же модели и прошивки нормально работают на других установках, а затронутый принтер обычно позже начинает работать сам. После такой ошибки Bambuddy приостанавливает передачи к этому принтеру на пять минут и возвращается за файлом, когда пауза заканчивается, поэтому короткий эпизод исправляется сам; если карточка так и осталась пустой, значит отказ продлился дольше повторной попытки. Что именно это вызывает, пока неизвестно. Если повторяется, включите отладочное журналирование на странице Система и приложите пакет поддержки к своему сообщению.`,titleFtpTransferFailed:`Некоторые недавние печати не удалось заархивировать — передача файла не уложилась во время`,bodyFtpTransferFailed:`Нарезанный файл лежал на карте принтера, и принтер его действительно отдавал, но передача не завершилась за отведённое время. В момент старта печати принтер одновременно обслуживает камеру, сообщения о состоянии и загрузку задания, и крупный 3MF не всегда успевает пройти на этом фоне. Эти печати по-прежнему заархивированы с названием и временем, только без миниатюры и данных слайсера. Это не настройка слайсера и не следствие ваших изменений. Bambuddy возвращается за файлом ещё три раза в течение следующих десяти минут, поэтому большинство таких случаев закрываются сами; если карточка так и осталась пустой, значит и все эти попытки не уложились во время. Если это повторяется, увеличьте Таймаут подключения в разделе Настройки > Сеть > Повтор FTP.`,dismissLabel:`Закрыть это уведомление`},searchPlaceholder:`Поиск в архиве...`,filterByPrinter:`Фильтр по принтеру`,filterByStatus:`Фильтр по состоянию`,sortBy:`Сортировать по`,sortNewest:`Сначала новые`,sortOldest:`Сначала старые`,sortName:`Названию`,sortDuration:`Длительности`,sortLargest:`Сначала большие`,sortSmallest:`Сначала маленькие`,sortSize:`Размеру`,noArchives:`Архивы не найдены`,noArchivesSearch:`По вашему запросу ничего не найдено`,originalPrintNotVisible:`Исходная печать не отображается — попробуйте сбросить фильтры`,noArchivesYet:`Архив пока пуст`,prints:`печатей`,pagination:{showing:`Показано`,to:`–`,of:`из`,show:`Показывать`,page:`Страница`,all:`Все`},loadingArchives:`Загрузка архива...`,releaseToUpload:`Отпустите файлы для загрузки`,showAll:`Показать все`,showFavoritesOnly:`Только избранное`,gridView:`Плитка`,listView:`Список`,calendarView:`Календарь`,logView:`Журнал печати`,manageTags:`Управление тегами`,showFailedPrints:`Показывать неудачные печати`,hideFailedPrints:`Скрывать неудачные печати`,hideDuplicates:`Скрывать дубликаты`,viewOriginalPrint:`Открыть исходную печать №{{id}}`,printTime:`Время печати`,filamentUsed:`Израсходовано филамента`,cost:`Стоимость`,preview:`Предпросмотр`,deleteArchive:`Удалить запись из архива`,deleteConfirm:`Удалить эту запись из архива?`,favorite:`В избранное`,unfavorite:`Удалить из избранного`,viewDetails:`Подробнее`,status:{completed:`Завершено`,failed:`Ошибка`,stopped:`Остановлено`},toast:{source3mfAttached:`Исходный 3MF прикреплён: {{filename}}`,failedUploadSource3mf:`Не удалось загрузить исходный 3MF`,source3mfRemoved:`Исходный 3MF удалён`,failedRemoveSource3mf:`Не удалось удалить исходный 3MF`,f3dAttached:`F3D прикреплён: {{filename}}`,failedUploadF3d:`Не удалось загрузить F3D`,f3dRemoved:`F3D удалён`,failedRemoveF3d:`Не удалось удалить F3D`,timelapseAttached:`Таймлапс прикреплён: {{filename}}`,timelapseAlreadyAttached:`Таймлапс уже прикреплён`,noMatchingTimelapse:`Подходящий таймлапс не найден`,failedScanTimelapse:`Не удалось найти таймлапс`,failedAttachTimelapse:`Не удалось прикрепить таймлапс`,timelapseRemoved:`Таймлапс удалён`,failedRemoveTimelapse:`Не удалось удалить таймлапс`,timelapseUploaded:`Таймлапс загружен: {{filename}}`,failedUploadTimelapse:`Не удалось загрузить таймлапс`,archiveDeleted:`Запись удалена из архива`,failedDeleteArchive:`Не удалось удалить запись из архива`,addedToFavorites:`Добавлено в избранное`,removedFromFavorites:`Удалено из избранного`,projectUpdated:`Проект обновлён`,failedUpdateProject:`Не удалось обновить проект`,linkCopied:`Ссылка скопирована`,failedCopyLink:`Не удалось скопировать ссылку`,photoDeleted:`Фотография удалена`,failedDeletePhoto:`Не удалось удалить фотографию`,failedDeleteArchives:`Не удалось удалить записи из архива`,failedUpdateFavorites:`Не удалось обновить избранное`,exportDownloaded:`Экспортированный файл скачан`,exportFailed:`Ошибка экспорта`},menu:{print:`Печать`,openInBambuStudio:`Открыть в слайсере`,slice:`Нарезать`,externalLink:`Внешняя ссылка`,viewOnMakerWorld:`Открыть на MakerWorld`,preview3d:`3D-просмотр`,viewTimelapse:`Посмотреть таймлапс`,scanForTimelapse:`Найти таймлапс`,uploadTimelapse:`Загрузить таймлапс`,removeTimelapse:`Удалить таймлапс`,downloadSource3mf:`Скачать исходный 3MF`,uploadSource3mf:`Загрузить исходный 3MF`,replaceSource3mf:`Заменить исходный 3MF`,removeSource3mf:`Удалить исходный 3MF`,uploadF3d:`Загрузить F3D`,replaceF3d:`Заменить F3D`,downloadF3d:`Скачать F3D`,removeF3d:`Удалить F3D`,download:`Скачать`,copyDownloadLink:`Скопировать ссылку для скачивания`,qrCode:`QR-код`,viewPhotos:`Посмотреть фотографии`,viewPhotosCount:`Фотографии ({{count}})`,projectPage:`Страница проекта`,addToFavorites:`Добавить в избранное`,removeFromFavorites:`Удалить из избранного`,edit:`Изменить`,printLog:`Журнал печати`,goToProject:`Открыть проект: {{name}}`,addToProject:`Добавить в проект`,removeFromProject:`Удалить из проекта`,loading:`Загрузка...`,noProjectsAvailable:`Нет доступных проектов`,searchProjects:`Поиск проектов…`,select:`Выбрать`,deselect:`Снять выделение`,delete:`Удалить`},permission:{noReprint:`У вас нет разрешения на повторную печать этой записи`,noAddToQueue:`У вас нет разрешения на добавление в очередь`,noUpdateArchives:`У вас нет разрешения на изменение архива`,noUploadFiles:`У вас нет разрешения на загрузку файлов`,noDownload:`У вас нет разрешения на скачивание файлов из архива`,noCopyLink:`У вас нет разрешения на копирование ссылок для скачивания`,noDelete:`У вас нет разрешения на удаление этой записи`,noEdit:`У вас нет разрешения на изменение этой записи`,noCreate:`У вас нет разрешения на создание записей в архиве`},platePicker:{title:`Выберите пластину для предпросмотра`,hint:`В этой записи несколько пластин. Выберите пластину, которую нужно открыть в просмотрщике G-code.`,plateLabel:`Пластина {{index}}`,objectCount:`{{count}} объект`,objectCount_plural:`{{count}} объектов`,noGcode:`В этой записи нет нарезанного G-code для предпросмотра. Сначала откройте файл в Bambu Studio и выполните нарезку.`},card:{previousPlate:`Предыдущая пластина`,nextPlate:`Следующая пластина`,plateNumber:`Пластина {{index}}`,moreOptions:`Щёлкните правой кнопкой для дополнительных действий`,addToFavorites:`Добавить в избранное`,removeFromFavorites:`Удалить из избранного`,cancelled:`отменено`,failed:`ошибка`,duplicate:`дубликат`,duplicateTitle:`Эта модель уже печаталась`,openSource3mf:`Открыть исходный 3MF в Bambu Studio (щёлкните правой кнопкой для дополнительных действий)`,downloadF3d:`Скачать файл проекта Fusion 360`,viewTimelapse:`Посмотреть таймлапс`,viewPhoto:`Посмотреть фотографию`,viewPhotos:`Посмотреть фотографии: {{count}}`,openFolder:`Открыть папку: {{name}}`,slicedFile:`Нарезанный файл — готов к печати`,sourceFile:`Только исходный файл — сопоставление AMS недоступно`,gcode:`G-CODE`,source:`ИСХОДНИК`,project:`Проект: {{name}}`,runsBadge:`Печатей: {{count}}`,runsBadgeTitle:`Всего печатей: {{count}}, успешных: {{successful}}, неудачных: {{failed}}. Нажмите, чтобы открыть полный журнал.`,estimated:`Расчётное время: {{time}}`,actual:`Фактическое время: {{time}}`,accuracy:`Точность оценки: {{percent}}%`,filament:`{{weight}} г`,layer:`{{count}} слой`,layers:`{{count}} слоёв`,object:`{{count}} объект`,objects:`{{count}} объектов`,slicedFor:`Нарезано для {{model}}`,uploadedBy:`Загрузил`,noPermissionReprint:`У вас нет разрешения на повторную печать`,noFileForReprint:`Файл 3MF недоступен: при сохранении задания не удалось скачать его с принтера`,slicerAmsMapping:`Маппинг AMS сохранён ({{printer}})`,slicerAmsMappingTooltip:`Выбор ячеек AMS, сделанный слайсером, сохранён для принтера {{printer}}. Номера ячеек имеют смысл только на нём, поэтому повторная печать использует их только при отправке снова на {{printer}}.`,noPermissionEdit:`У вас нет разрешения на изменение архива`,noPermissionDelete:`У вас нет разрешения на удаление записей из архива`,openInBambuStudio:`Открыть в слайсере`,openInBambuStudioToSlice:`Открыть в слайсере для нарезки`,slice:`Нарезать`,externalLink:`Внешняя ссылка`,makerWorld:`MakerWorld: {{designer}}`,viewProject:`Открыть проект`,noExternalLink:`Внешняя ссылка не указана`,preview3d:`3D-просмотр`,download:`Скачать`,edit:`Изменить`,delete:`Удалить`},runLog:{title:`Журнал печати`,modalTitle:`Журнал печати — {{name}}`,modalTitleFallback:`эта запись`,empty:`Для этой записи пока нет событий печати.`,col:{date:`Дата`,status:`Состояние`,duration:`Длительность`,filament:`Филамент`,cost:`Стоимость`},status:{completed:`Завершено`,failed:`Ошибка`,cancelled:`Отменено`,stopped:`Остановлено`,skipped:`Пропущено`,printing:`Печать`}},modal:{deleteArchive:`Удаление записи из архива`,deleteConfirm:`Удалить «{{name}}»? Это действие нельзя отменить.`,deleteButton:`Удалить`,deletePurgeStats:`Также исключить эту печать из краткой статистики: филамент, время, стоимость и энергия`,deleteQueueItemsWarning:`Также будут удалены связанные элементы очереди: {{count}}.`,deleteBlockedByPrinting:`Удаление невозможно: сейчас печатаются связанные элементы очереди ({{count}}). Сначала остановите печать.`,removeSource3mf:`Удаление исходного 3MF`,removeSource3mfConfirm:`Удалить исходный файл 3MF из «{{name}}»? Исходный проект слайсера будет удалён.`,removeButton:`Удалить`,removeF3d:`Удаление F3D`,removeF3dConfirm:`Удалить файл проекта Fusion 360 из «{{name}}»?`,removeTimelapse:`Удаление таймлапса`,removeTimelapseConfirm:`Удалить видео таймлапса из «{{name}}»?`,timelapse:`{{name}} — таймлапс`,selectTimelapse:`Выбор таймлапса`,selectTimelapseDesc:`Автоматически найти совпадение не удалось. Выберите таймлапс для этой печати:`,deleteArchives:`Удаление записей из архива`,deleteArchivesConfirm:`Удалить записи из архива ({{count}})? Это действие нельзя отменить.`,deleteCount:`Удалить: {{count}}`},page:{title:`Архив`,printsCount:`Показано {{filtered}} из {{total}} печатей`,dropFilesHere:`Перетащите сюда файлы .3mf`,releaseToUpload:`Отпустите файлы для загрузки`,only3mfSupported:`Поддерживаются только файлы .3mf`,close:`Закрыть`,selected:`Выбрано: {{count}}`,selectAll:`Выбрать все`,tags:`Теги`,project:`Проект`,favorite:`Избранное`,delete:`Удалить`,toggledFavorites:`Избранное изменено для записей: {{count}}`,failedUpdateFavorites:`Не удалось обновить избранное`,archivesDeleted:`Удалено записей: {{count}}`,failedDeleteArchives:`Не удалось удалить записи из архива`,photoDeleted:`Фотография удалена`,failedDeletePhoto:`Не удалось удалить фотографию`},list:{name:`Название`,printer:`Принтер`,date:`Дата`,size:`Размер`,actions:`Действия`,hasTimelapse:`Есть таймлапс`},log:{date:`Дата`,printName:`Название печати`,printer:`Принтер`,user:`Пользователь`,status:`Состояние`,duration:`Длительность`,filament:`Филамент`,filamentUsed:`Израсходовано филамента`,cost:`Стоимость`,energy:`Энергия`,energyCost:`Стоимость энергии`,completedAt:`Завершено`,columns:`Столбцы`,sortBy:`Сортировать по: {{column}}`,allPrinters:`Все принтеры`,allUsers:`Все пользователи`,allStatuses:`Все состояния`,cancelled:`Отменено`,skipped:`Пропущено`,dateFrom:`С`,dateTo:`По`,noEntries:`Записи журнала не найдены`,showing:`Показано {{count}} из {{total}} записей`,rowsPerPage:`Строк`,page:`Страница`,prev:`Назад`,next:`Далее`,clearLog:`Очистить журнал`,clearLogTitle:`Очистка журнала печати`,clearLogConfirm:`Все записи журнала печати будут удалены без возможности восстановления. Архив и очередь не изменятся. Продолжить?`,clearLogButton:`Очистить всё`,cleared:`Удалено записей журнала: {{count}}`,clearFailed:`Не удалось очистить журнал печати`,deleteEntryTitle:`Удаление записи журнала`,deleteEntryConfirm:`Запись будет удалена из журнала, а её вклад в расход филамента, время и стоимость исчезнет из краткой статистики. Связанная запись архива, если она существует, не изменится. Это действие нельзя отменить.`,entryDeleted:`Запись журнала удалена`,entryDeleteFailed:`Не удалось удалить запись журнала`,editEntryTitle:`Изменение записи журнала`,editEntryDescription:`Укажите результат этой печати. Виджет анализа отказов группирует данные по этим значениям, поэтому изменения сразу отразятся в статистике.`,entryUpdated:`Запись журнала обновлена`,entryUpdateFailed:`Не удалось обновить запись журнала`,statuses:{completed:`Завершено`,failed:`Ошибка`,stopped:`Остановлено`,cancelled:`Отменено`,skipped:`Пропущено`}}},dispatchToast:{untitled:`Задание печати`,startingPrints:`Запуск печати`,progressSummary:`Завершено: {{complete}}/{{total}} • Обрабатывается: {{processing}}`,expandDetails:`Показать подробности отправки`,collapseDetails:`Скрыть подробности отправки`,awaitingPrinter:`Ожидание принтера…`,status:{processing:`Обработка`,completed:`Завершено`,failed:`Ошибка`},failed:{generic:`Не удалось отправить задание`,upload_failed:`Не удалось загрузить файл на принтер`,start_command_failed:`Принтер отклонил команду запуска`},dismiss:`Закрыть`},pipelineRuns:{title:`Запуски конвейеров`,loading:`Загрузка…`,empty:`Конвейеры ещё не запускались.`,filter:{pipeline:`Конвейер`,status:`Состояние`,target:`Назначение`,all:`Все`,allPipelines:`Все конвейеры`,allStatus:`Все состояния`,allTargets:`Все назначения`,clear:`Сбросить фильтры`,noMatches:`Нет запусков, соответствующих выбранным фильтрам.`},totalCount_one:`{{n}} запуск`,totalCount_other:`{{n}} запусков`,copies:`Копий: {{n}}`,failedCount:`Ошибок: {{n}}`,copyN:`Копия {{n}}`,retryFailed:`Повторить неудачные`,retryOf:`повтор запуска №{{n}}`,pagination:`{{start}}–{{end}} из {{total}}`,cancelledByUser:`Отменено пользователем`,toast:{cancelled:`Запуск отменён`,cancelFailed:`Не удалось отменить запуск`,retryStarted:`Повторный запуск начат`,retryFailed:`Повторный запуск не удался`,cleared:`Удалено запусков: {{n}}`,clearFailed:`Не удалось очистить журнал`},clearLog:`Очистить журнал`,clearConfirmTitle:`Очистить журнал?`,clearConfirmBody:`Удалить все завершённые, неудачные, отменённые и частично неудачные запуски конвейеров? Выполняющиеся запуски сохранятся. Это действие нельзя отменить.`,clearConfirmAction:`Очистить`,jobStatus:{pending:`ожидание`,awaiting_printer:`ожидание принтера`,queued:`в очереди`,printing:`печать`,completed:`завершено`,failed:`ошибка`,cancelled:`отменено`}},queue:{title:`Очередь печати`,subtitle:`Планирование и управление заданиями печати`,filamentShort:{rowBadge:`Для назначенной катушки недостаточно филамента`,rowTooltip:`Планировщик отметил это задание. Нажмите «Запустить», чтобы увидеть нехватку по каждому слоту и решить, печатать ли всё равно.`,confirmTitle:`Недостаточно филамента`,confirmIntro:`Назначенной катушки недостаточно как минимум для одного слота. Всё равно запустить печать?`,lineItem:`Слот {{slot}}: требуется {{required}} г, осталось {{remaining}} г`,unknown:`неизвестно`,printAnyway:`Всё равно печатать`},slicerAmsMapping:{rowBadge:`Ячейки AMS сохранены для этого принтера`,rowTooltip:`У этого архива сохранены точные ячейки AMS, выбранные слайсером, — для принтера, на который нацелено это задание. Повторная печать на нём может использовать те же катушки вместо повторного подбора по типу и цвету.`},editQueueItem:`Изменить задание в очереди`,selectAllPlates:`Выбрать все пластины ({{count}})`,deselectAll:`Снять выделение`,printQueued:`Задание добавлено в очередь`,printQueuedWillStartWhenIdle:`Запустится, когда принтер освободится`,itemsQueued:`Добавлено в очередь: {{count}}`,sending:`Отправка...`,sendingProgress:`Отправка {{current}} из {{total}}...`,adding:`Добавление...`,addingProgress:`Добавление {{current}} из {{total}}...`,savingProgress:`Сохранение {{current}} из {{total}}...`,clearQueue:`Очистить очередь`,clearHistory:`Очистить историю`,emptyQueue:`Очередь пуста`,position:`Позиция`,scheduledTime:`Запланированное время`,moveUp:`Переместить вверх`,moveDown:`Переместить вниз`,startNow:`Запустить сейчас`,printingInProgress:`Идёт печать...`,viewArchive:`Открыть архив`,viewInFileManager:`Открыть в файловом менеджере`,itemCount:`{{count}} задание`,itemCount_plural:`{{count}} заданий`,dragToReorder:`Перетащите для изменения порядка (только задания «как можно скорее»)`,reorderHint:`Позиция влияет только на задания «как можно скорее». Запланированные задания запускаются в указанное время.`,sjf:{label:`SJF`,tooltip:`Shortest Job First — планировщик отдаёт приоритет более коротким заданиям`},addedBy:`Добавил: {{name}}`,nextInQueue:`Следующее в очереди`,clearPlateSuccess:`Пластина очищена — можно запускать следующую печать`,plateNumber:`Пластина {{index}}`,quantity:`Количество`,quantityHint:`Будет создано заданий: {{count}}`,plateQuantityLabel:`Повторы: {{plate}}`,plateQuantityTotal_one:`Всего запусков: {{count}}`,plateQuantityTotal_other:`Всего запусков: {{count}}`,batchOrders:{title:`Пакетные заказы`,emptyTitle:`Пакетных заказов нет`,emptyDescription:`Поставьте в очередь файл с несколькими столами или несколько копий одного стола — заказ появится здесь вместе с прогрессом.`,filter:{active:`Активные`,completed:`Завершённые`,cancelled:`Отменённые`,all:`Все`},status:{active:`Активен`,completed:`Завершён`,cancelled:`Отменён`},noTargets:`Только группировка`,noTargetsHint:`Создан до появления целевых количеств по столам, поэтому отслеживает поставленные в очередь запуски, а не цель.`,dispatchRemaining:`Поставить в очередь: {{count}}`,dispatchPlate:`Поставить остаток`,strandedPlate:`Нет запуска для копирования настроек`,strandedNotice:`Не удаётся поставить в очередь {{runs}} из {{owed}} ещё не выполненных запусков: для этой пластины не осталось запуска в очереди или завершённого, из которого можно скопировать настройки. Поставьте пластину в очередь один раз из файла или отмените заказ.`,dispatched:`Оставшиеся запуски для «{{name}}» поставлены в очередь`,plateProgress:`Готово {{completed}} из {{target}}`,remaining:`Осталось: {{count}}`,failed:`Неудачных: {{count}}`,printing:`Печатается: {{count}}`,wholeFile:`Весь файл`,due:`Срок: {{date}}`,costSoFar:`{{amount}} потрачено`,costRemaining:`(ещё {{amount}})`},activeBatches:`Активные партии`,batchProgress:`Выполнено {{completed}} из {{total}}`,cancelBatch:`Отменить оставшиеся`,batchCancelled:`Оставшиеся задания партии отменены`,cancelBatchConfirmTitle:`Отменить партию`,cancelBatchConfirmMessage:`Закрыть этот заказ? Запуски, ещё стоящие в очереди, будут отменены, и заказ перестанет требовать то, что не произведено.`,batch:{defaultName:`Партия`,label:`{{count}} задание`,label_plural:`{{count}} заданий`,pendingCount:`Ожидает: {{count}}`,pendingCount_plural:`Ожидают: {{count}}`,expand:`Развернуть партию`,collapse:`Свернуть партию`,groupAsBatch:`Объединить в партию…`,groupAsBatchDescription:`Объединить выбранные задания ({{count}}) в одну сворачиваемую партию.`,nameLabel:`Название партии`,namePlaceholder:`Например: подарки к пятнице`,create:`Создать партию`,ungroup:`Разгруппировать`,ungroupConfirmTitle:`Разгруппировать партию?`,ungroupConfirmMessage:`Задания останутся в очереди, но больше не будут объединены в одну группу.`,dragGroup:`Перетащить группу`},tabs:{batches:`Партии`,queue:`Очередь`,history:`История`,timeline:`Временная шкала`,pipelines:`Конвейеры`},layout:{flatList:`Список`,byPrinter:`По принтерам`,groupByPrinter:`Группировать по принтерам`},history:{emptyTitle:`История пока пуста`,emptyDescription:`Здесь появятся завершённые, отменённые и неудачные задания.`,showMore:`Показать ещё`,showingCount:`Показано {{shown}} из {{total}}`},dragGhost:{multiCount:`{{count}} заданий`,batch:`{{name}} ({{count}} копия)`,batch_plural:`{{name}} ({{count}} копий)`},sections:{currentlyPrinting:`Сейчас печатается`,queued:`В очереди`,history:`История`},status:{pending:`Ожидает`,waiting:`Ожидание`,printing:`Печать`,paused:`Приостановлено`,completed:`Завершено`,failed:`Ошибка`,skipped:`Пропущено`,cancelled:`Отменено`},summary:{printing:`Печатается`,queued:`В очереди`,totalTime:`Общее время очереди`,totalWeight:`Общий вес очереди`,history:`История`},filter:{allPrinters:`Все принтеры`,unassigned:`Не назначено`,allStatus:`Все состояния`,allLocations:`Все расположения`,any:`Любое`},sort:{byPosition:`По позиции`,byName:`По названию`,byPrinter:`По принтеру`,bySchedule:`По времени запуска`,byDate:`По дате`,ascendingOldest:`По возрастанию (сначала старые)`,descendingNewest:`По убыванию (сначала новые)`},badges:{staged:`Подготовлено`,requiresPrevious:`Требуется успешное предыдущее задание`,autoPowerOff:`Автоотключение питания`,gcodeInjection:`G-code`},empty:{title:`Нет запланированных заданий`,description:`Запланируйте печать на странице архива через пункт «Запланировать» в контекстном меню либо перетащите сюда файлы.`},time:{etaIfStartedNow:`Время завершения, если запустить это задание сейчас`,whenFree:`Когда принтер освободится`,overdue:`Просрочено`,now:`Сейчас`,lessThanMinute:`Меньше чем через минуту`,inMinutes:`Через {{count}} мин`,inHours:`Через {{count}} ч`},actions:{startPrint:`Запустить печать`,stopPrint:`Остановить печать`,requeue:`Вернуть в очередь`},bulkEdit:{title:`Изменить {{count}} задание`,title_plural:`Изменить задания: {{count}}`,description:`К выбранным заданиям будут применены только изменённые параметры.`,printer:`Принтер`,noChange:`— Без изменений —`,queueOptions:`Параметры очереди`,staged:`Подготовлено (ручной запуск)`,autoPowerOff:`Отключить питание после печати`,requirePrevious:`Требовать успешного завершения предыдущего задания`,gcodeInjection:`Вставлять G-код`,printOptions:`Параметры печати`,bedLevelling:`Калибровка стола`,flowCalibration:`Калибровка потока`,vibrationCalibration:`Калибровка вибраций`,layerInspection:`Проверка первого слоя`,timelapse:`Таймлапс`,useAms:`Использовать AMS`,nozzleOffsetCali:`Калибровка смещения сопел`,applyChanges:`Применить изменения`,selectAll:`Выбрать все`,deselectAll:`Снять выделение`,selected:`Выбрано: {{count}}`,editSelected:`Изменить выбранные`,cancelSelected:`Отменить выбранные`},confirm:{cancelTitle:`Отменить запланированную печать`,cancelMessage:`Отменить задание «{{name}}»?`,stopTitle:`Остановить печать`,stopMessage:`Остановить текущую печать «{{name}}»? Задание на принтере будет отменено.`,removeTitle:`Удалить из истории`,removeMessage:`Удалить «{{name}}» из истории очереди?`,clearHistoryTitle:`Очистить историю`,clearHistoryMessage:`Удалить все записи из истории ({{count}})?`,cancelButton:`Отменить печать`,stopButton:`Остановить печать`,thisPrint:`эту печать`,thisItem:`это задание`},toast:{cancelled:`Задание отменено`,cancelFailed:`Не удалось отменить задание`,removed:`Задание удалено`,keptForOrder:`Отменено, а не удалено: только из этого запуска заказ может снова поставить эту пластину в очередь`,historyKeptForOrders:`Сохранено {{kept}}, они ещё нужны заказам.`,removeFailed:`Не удалось удалить задание`,stopped:`Печать остановлена`,stopFailed:`Не удалось остановить печать`,released:`Задание передано в очередь`,startFailed:`Не удалось запустить печать`,reorderFailed:`Не удалось изменить порядок очереди`,historyCleared:`Удалено записей истории: {{count}}`,clearHistoryFailed:`Не удалось очистить историю`,updateFailed:`Не удалось обновить задания`,bulkCancelled:`Отменено заданий: {{count}}`,bulkCancelFailed:`Не удалось отменить задания`,batchCreated:`Партия «{{name}}» создана`,batchCreateFailed:`Не удалось создать партию`,batchUngrouped:`Разгруппировано заданий: {{count}}`,batchUngroupFailed:`Не удалось разгруппировать партию`,resumedAfterFailure:`Очередь возобновлена — восстановлено заданий: {{restored}}`,resumeAfterFailureFailed:`Не удалось возобновить очередь`},resumeAfterFailure:{banner:`Очередь принтера {{printer}} заблокирована из-за ошибки предыдущей печати — пропущено заданий: {{count}}`,bannerHint:`Устраните проблему с принтером, затем возобновите очередь, чтобы вернуть пропущенные задания и снять блокировку.`,button:`Возобновить после ошибки`,confirmTitle:`Возобновить очередь после ошибки?`,confirmMessage:`Вернуть пропущенные задания ({{count}}) для принтера {{printer}} в состояние ожидания и снять блокировку. Перед продолжением убедитесь, что принтер готов.`},timeline:{listView:`Список`,timelineView:`Временная шкала`,unassigned:`Не назначено`,noData:`На этот день печать не запланирована`,nothingCommitted:`В этом интервале нет заданий с фиксированным временем. Подготовленные и ожидающие задания, а также задания «как можно скорее» на свободных принтерах не показываются — задайте время запуска или выпустите подготовленное задание в очередь.`,allDoneBy:`Расчётное завершение всех заданий: {{time}}`,staged:`Подготовлено`,filterAll:`Показать все`,filterPrinting:`Печатается`,filterQueued:`В очереди`,time:{anyMoment:`в любой момент`,minutesLeft:`осталось {{minutes}} мин`,hoursLeft:`осталось {{hours}} ч`,hoursMinutesLeft:`осталось {{hours}} ч {{minutes}} мин`},day:{previous:`Предыдущий день`,next:`Следующий день`,today:`Сегодня`},window:{back12h:`Назад на 12 часов`,forward12h:`Вперёд на 12 часов`,now:`Сейчас`},printerColumnHeader:`Принтер`},permissions:{noStopPrint:`У вас нет разрешения останавливать печать`,noStartPrint:`У вас нет разрешения запускать печать`,noEdit:`У вас нет разрешения изменять это задание`,noCancel:`У вас нет разрешения отменять это задание`,noRequeue:`У вас нет разрешения возвращать задания в очередь`,noRemove:`У вас нет разрешения удалять это задание`,noClearHistory:`У вас нет разрешения очищать историю`,noEditItems:`У вас нет разрешения изменять задания очереди`,noCancelItems:`У вас нет разрешения отменять задания очереди`}},stats:{title:`Статистика`,subtitle:`Перетаскивайте виджеты для изменения порядка. Нажмите значок глаза, чтобы скрыть виджет.`,overview:`Обзор`,totalPrints:`Всего печатей`,successRate:`Успешность`,totalPrintTime:`Общее время печати`,printTime:`Время печати`,totalFilament:`Всего использовано филамента`,filamentUsed:`Использовано филамента`,filamentCost:`Стоимость филамента`,totalCost:`Общая стоимость`,energyUsed:`Потреблено энергии`,energyCost:`Стоимость энергии`,energyWarmingUpTooltip:`Учёт энергии ещё накапливает почасовые снимки. Итоги за выбранный период станут точными, когда появится хотя бы один снимок до начала этого периода. Первые значения могут быть занижены.`,averagePrintTime:`Среднее время печати`,printsPerDay:`Печатей в день`,byPrinter:`По принтерам`,printsByPrinter:`Печати по принтерам`,byMaterial:`По материалам`,byMonth:`По месяцам`,last7Days:`Последние 7 дней`,last30Days:`Последние 30 дней`,last90Days:`Последние 90 дней`,allTime:`За всё время`,quickStats:`Краткая статистика`,printActivity:`Активность печати`,filamentTypes:`Типы филамента`,filamentTrends:`Расход филамента`,failureAnalysis:`Анализ неудач`,timeAccuracy:`Точность оценки времени`,successful:`Успешно:`,failed:`Неудачно:`,cancelled:`Отменено:`,perfectEstimate:`100% — точное совпадение с оценкой`,noTimeAccuracyData:`Данных о точности оценки времени пока нет`,noFilamentData:`Нет данных о филаменте`,noPrinterData:`Нет данных о принтерах`,noPrintData:`Нет данных о печати`,noPrintDataLast30Days:`За последние 30 дней данных о печати нет`,failureReasons:`Причины неудач`,topFailureReasons:`Основные причины неудач`,failedPrintsCount:`Неудачных печатей: {{failed}} из {{total}}`,lastWeekRate:`За прошлую неделю: {{rate}}%`,resetLayout:`Сбросить расположение`,recalculateCosts:`Пересчитать стоимость`,recalculateCostsHint:`Пересчитать стоимость всех архивных заданий по текущим ценам филамента`,exportStats:`Экспорт статистики`,exportAsCsv:`Экспорт в CSV`,exportAsExcel:`Экспорт в Excel`,hiddenCount:`Скрыто: {{count}}`,exportDownloaded:`Файл экспорта скачан`,exportFailed:`Не удалось экспортировать данные`,layoutReset:`Расположение сброшено`,recalculatedCosts:`Пересчитана стоимость архивов: {{count}}`,recalculateFailed:`Не удалось пересчитать стоимость`,loadingStats:`Загрузка статистики...`,noPermissionResetLayout:`У вас нет разрешения сбрасывать расположение`,noPermissionRecalculate:`У вас нет разрешения пересчитывать стоимость`,noPrintDataInRange:`В выбранном периоде нет данных о печати`,periodFilament:`Филамент за период`,periodCost:`Стоимость за период`,avgPerPrint:`В среднем на печать`,usageOverTime:`Расход по времени`,energyOverTime:`Энергия по времени`,filamentByWeight:`По весу`,printDuration:`Продолжительность печати`,printerUtilization:`Загрузка принтеров`,filamentSuccess:`Успешность по материалам`,printHabits:`Характер печати`,printTimeOfDay:`Время суток`,colorDistribution:`Распределение по цветам`,noColorData:`Нет данных о цветах`,records:`Рекорды`,longestPrint:`Самая долгая печать`,heaviestPrint:`Самая тяжёлая печать`,mostExpensivePrint:`Самая дорогая печать`,busiestDay:`Самый загруженный день`,successStreak:`Серия успешных печатей`,streakPrint:`успешная печать подряд`,streakPrints:`{{count}} успешных печатей подряд`,printerStats:`Статистика принтеров`,hours:`часов`,avgPrints:`В среднем печатей`,noArchiveData:`Нет данных о печати`,filamentByTime:`По времени`,avgWeight:`Средний вес`,avgTime:`Среднее время`,filamentByPrints:`По количеству печатей`,timeframe:{today:`Сегодня`,"this-week":`Эта неделя`,"this-month":`Этот месяц`,"last-7":`Последние 7 дней`,"last-30":`Последние 30 дней`,"last-90":`Последние 90 дней`,"this-year":`Этот год`,"all-time":`За всё время`,custom:`Произвольный период`,from:`С`,to:`По`},allUsers:`Все пользователи`,noUser:`Без пользователя (система)`,filterByUser:`Фильтр по пользователю`},maintenance:{title:`Обслуживание`,overview:`Обзор`,allOk:`Всё обслуживание выполнено вовремя`,dueCount:`Требуется выполнить: {{count}}`,dueCount_plural:`Требуется выполнить: {{count}}`,warningCount:`Предупреждений: {{count}}`,warningCount_plural:`Предупреждений: {{count}}`,totalPrintTime:`Общее время печати`,nextMaintenance:`Следующее обслуживание`,nothingDue:`Пока ничего не требуется`,tasks:`Задачи`,lastPerformed:`Последнее выполнение`,interval:`Интервал`,hoursRemaining:`Осталось {{hours}} ч`,hoursOverdue:`Просрочено на {{hours}} ч`,markDone:`Отметить выполненным`,performMaintenance:`Выполнить обслуживание`,history:`История`,noHistory:`История обслуживания пуста`,editPrintHours:`Изменить часы печати`,currentHours:`Текущие часы`,statusTab:`Состояние`,settingsTab:`Настройки`,overdueCount:`Просрочено: {{count}}`,dueSoonCount:`Скоро потребуется: {{count}}`,dueSoon:`Скоро потребуется`,allGood:`Всё в порядке`,overdueBy:`Просрочено на {{duration}}`,dueIn:`Через {{duration}}`,timeLeft:`Осталось {{duration}}`,day:`1 день`,days:`{{count}} дней`,week:`1 неделя`,weeks:`{{count}} недель`,month:`1 месяц`,months:`{{count}} месяцев`,year:`1 год`,maintenanceTypes:`Виды обслуживания`,maintenanceTypesDescription:`Системные и пользовательские задачи обслуживания`,addCustomType:`Добавить пользовательскую задачу`,restoreDefaults:`Восстановить стандартные задачи`,intervalType:`Тип интервала`,intervalValue:`Интервал ({{type}})`,icon:`Значок`,documentationLink:`Ссылка на документацию (необязательно)`,assignToPrinters:`Назначить принтерам`,selectAtLeastOnePrinter:`Выберите хотя бы один принтер`,addType:`Добавить вид`,custom:`Пользовательский`,printHours:`Часы печати`,calendarDays:`Календарные дни`,exampleName:`Например: заменить HEPA-фильтр`,viewDocumentation:`Открыть документацию`,timeBasedInterval:`Интервал по времени`,intervalOverrides:`Переопределение интервалов`,intervalOverridesDescription:`Настройка отдельных интервалов для конкретных принтеров`,assignedToPrinters:`Назначено принтерам:`,noPrintersAssigned:`Не назначено ни одному принтеру`,addPrinterShort:`Добавить:`,printersAssignedClick:`Назначено принтерам: {{count}} — нажмите для управления`,removeFromPrinter:`Убрать с этого принтера`,types:{lubricateCarbonRods:`Смазать карбоновые валы`,lubricateRails:`Смазать линейные направляющие`,cleanNozzle:`Очистить сопло/хотэнд`,checkBelts:`Проверить натяжение ремней`,cleanBuildPlate:`Очистить печатную пластину`,checkExtruder:`Проверить шестерни экструдера`,checkCooling:`Проверить вентиляторы охлаждения`,generalInspection:`Общий осмотр`,cleanCarbonRods:`Очистить карбоновые валы`,lubricateSteelRods:`Смазать стальные валы`,cleanSteelRods:`Очистить стальные валы`,cleanLinearRails:`Очистить линейные направляющие`,checkPtfeTube:`Проверить PTFE-трубку`,replaceHepaFilter:`Заменить HEPA-фильтр`,replaceCarbonFilter:`Заменить угольный фильтр`,lubricateLeftNozzleRail:`Смазать направляющую левого сопла`},maintenanceComplete:`Обслуживание отмечено выполненным`,typeUpdated:`Вид обслуживания обновлён`,typeDeleted:`Вид обслуживания удалён`,defaultsRestored:`Восстановлено стандартных задач: {{count}}`,printHoursUpdated:`Часы печати обновлены`,printerAssigned:`Принтер назначен`,printerRemoved:`Принтер удалён из назначения`,deleteTypeConfirm:`Удалить «{{name}}»?`,deleteSystemTypeTitle:`Удалить стандартную задачу обслуживания?`,deleteSystemTypeMessage:`Удалить стандартную задачу обслуживания «{{name}}»?`,noPermissionUpdate:`У вас нет разрешения обновлять задачи обслуживания`,noPermissionPerform:`У вас нет разрешения отмечать обслуживание выполненным`,noPermissionEditTypes:`У вас нет разрешения изменять виды обслуживания`,noPermissionDeleteTypes:`У вас нет разрешения удалять виды обслуживания`,noPermissionEditHours:`У вас нет разрешения изменять часы печати`,noPermissionRemovePrinter:`У вас нет разрешения удалять назначения принтеров`,noPermissionAssignPrinter:`У вас нет разрешения назначать принтеры`,noPermissionEditIntervals:`У вас нет разрешения изменять интервалы`,configureSettings:`Настроить виды обслуживания и интервалы`},settings:{sliceEngine:`Движок нарезки`,sliceEngineSidecar:`Серверный sidecar`,sliceEngineSidecarHint:`Нарезка выполняется на сервере, в контейнере sidecar слайсера.`,sliceEngineBrowser:`В браузере`,sliceEngineBrowserHint:`Нарезка выполняется на этом устройстве, без участия сервера.`,title:`Настройки`,general:`Общие`,tabs:{general:`Общие`,smartPlugs:`Умные розетки`,sensors:`Датчики`,notifications:`Уведомления`,queue:`Рабочий процесс`,queueDispatch:`Очередь и отправка`,queuePipelines:`Конвейеры`,filament:`Филамент`,network:`Сеть`,apiKeys:`Ключи API`,virtualPrinter:`Виртуальный принтер`,spoolbuddy:`SpoolBuddy`,failureDetection:`Обнаружение сбоев`,users:`Аутентификация`,backup:`Резервное копирование`,emailAuth:`Аутентификация по email`,ldap:`LDAP`,twoFa:`Двухфакторная аутентификация`,oidc:`SSO / OIDC`,security:`Безопасность`},spoolbuddy:{infoTitle:`Устройства SpoolBuddy`,infoBody:`Киоски SpoolBuddy регистрируются автоматически по сигналам активности. Удалите регистрацию устройства, если оно больше не используется или после сбоя демона остался устаревший дубликат.`,duplicatesTitle:`Зарегистрировано устройств: {{count}}`,duplicatesBody:`Интерфейс киоска использует только первое зарегистрированное устройство. Если один из экземпляров — устаревший дубликат после сбоя, удалите его регистрацию: работающее устройство зарегистрируется снова при следующем сигнале активности.`,empty:`Устройства SpoolBuddy пока не зарегистрированы.`,online:`В сети`,offline:`Не в сети`,unregister:`Удалить регистрацию`,unregisterSuccess:`Регистрация устройства удалена`,unregisterError:`Не удалось удалить регистрацию устройства`,confirmTitle:`Удалить регистрацию устройства SpoolBuddy?`,confirmBody:`Устройство «{{hostname}}» ({{deviceId}}) будет удалено из базы данных. Если оно работает, то зарегистрируется снова при следующем сигнале активности.`,ipAddress:`IP-адрес`,firmware:`Прошивка`,lastSeen:`Последняя активность`,daemonUptime:`Время работы демона`,systemUptime:`Время работы системы`,never:`никогда`,nfc:`NFC`,scale:`Весы`,cpuTemp:`Температура ЦП`,cpuLoad:`Загрузка ЦП`,memory:`Память`,disk:`Диск`,update:`Обновить`,updateConfirmTitle:`Обновить демон SpoolBuddy?`,updateConfirmBody:`Запустить обновление ПО на «{{hostname}}»? После установки обновления демон будет перезапущен.`,restartBrowser:`Перезапустить браузер`,restartBrowserConfirmTitle:`Перезапустить браузер киоска?`,restartBrowserConfirmBody:`Перезапустить браузер киоска на «{{hostname}}»? Экран ненадолго погаснет.`,restartDaemon:`Перезапустить демон`,restartDaemonConfirmTitle:`Перезапустить демон SpoolBuddy?`,restartDaemonConfirmBody:`Перезапустить демон SpoolBuddy на «{{hostname}}»? Устройство на несколько секунд пропадёт из сети.`,reboot:`Перезагрузить`,rebootConfirmTitle:`Перезагрузить устройство?`,rebootConfirmBody:`Перезагрузить «{{hostname}}»? Устройство будет недоступно около минуты.`,shutdown:`Выключить`,shutdownConfirmTitle:`Выключить устройство?`,shutdownConfirmBody:`Выключить «{{hostname}}»? Для повторного включения потребуется физический доступ.`,commandConfirm:`Подтвердить`,commandQueued:`Команда поставлена в очередь`,commandError:`Не удалось отправить команду`},ldap:{title:`Аутентификация LDAP`,enabledDesc:`Аутентификация LDAP включена`,disabledDesc:`Аутентификация LDAP отключена`,disabledHint:`Настройте и сохраните параметры LDAP ниже, затем включите аутентификацию.`,enabled:`Аутентификация LDAP включена`,disabled:`Аутентификация LDAP отключена`,feature1:`Пользователи могут входить с учётными данными LDAP`,feature2:`Локальная учётная запись администратора остаётся резервным способом входа`,feature3:`При входе группы LDAP сопоставляются с группами Bambuddy`,serverConfig:`Настройка сервера LDAP`,serverUrl:`Адрес сервера`,serverUrlHint:`Используйте ldaps:// для SSL либо ldap:// с StartTLS`,security:`Безопасность`,securityHint:`StartTLS переводит обычное соединение на TLS. LDAPS использует TLS с самого начала.`,bindDn:`Bind DN (служебная учётная запись)`,bindPassword:`Пароль Bind`,searchBase:`Базовый DN поиска`,userFilter:`Фильтр поиска пользователей`,userFilterHint:`{username} заменяется именем пользователя при входе. Для OpenLDAP используйте (uid={username}).`,advanced:`Дополнительно`,autoProvision:`Автоматически создавать пользователей`,autoProvisionHint:`Автоматически создавать учётную запись Bambuddy при первом входе через LDAP`,defaultGroup:`Группа по умолчанию`,defaultGroupNone:`— Нет (без резервной группы) —`,defaultGroupHint:`Резервная группа для пользователя LDAP, который успешно вошёл, но не состоит ни в одной сопоставленной группе LDAP. Оставьте пустым, чтобы такие пользователи не получали разрешений.`,groupMapping:`Сопоставление групп (JSON)`,groupMappingHint:`Сопоставьте DN групп LDAP с группами Bambuddy. Доступные группы: `,testConnection:`Проверить подключение`,settingsSaved:`Настройки LDAP сохранены`,errors:{serverRequired:`Укажите адрес сервера LDAP`,searchBaseRequired:`Укажите базовый DN поиска`,enableAuthFirst:`Сначала включите аутентификацию`,configureLdapFirst:`Сначала сохраните настройки LDAP`}},email:{smtpSettings:`Настройка SMTP`,smtpHost:`SMTP-сервер`,smtpPort:`Порт SMTP`,security:`Безопасность`,authentication:`Аутентификация`,username:`Имя пользователя`,password:`Пароль`,fromEmail:`Адрес отправителя`,fromName:`Имя отправителя`,testConnection:`Проверить подключение SMTP`,testRecipient:`Адрес получателя тестового письма`,sendTest:`Отправить тестовое письмо`,sending:`Отправка...`,save:`Сохранить настройки`,saving:`Сохранение...`,advancedAuth:`Расширенная аутентификация`,advancedAuthEnabled:`Расширенная аутентификация включена`,advancedAuthEnabledDesc:`Функции управления пользователями через email активны. Новые пользователи получают автоматически созданные пароли по почте и могут сбрасывать пароль через функцию восстановления.`,advancedAuthDisabled:`Расширенная аутентификация отключена`,advancedAuthDisabledDesc:`Включите расширенную аутентификацию, чтобы использовать почтовые функции управления пользователями.`,enable:`Включить`,disable:`Отключить`,feature1:`Пароли для новых пользователей создаются автоматически и отправляются по email`,feature2:`Пользователи могут входить по имени или адресу электронной почты`,feature3:`Доступно восстановление забытого пароля`,feature4:`Администраторы могут сбрасывать пароли пользователей по email`,errors:{requiredFields:`Заполните все обязательные поля`,usernameRequired:`При включённой аутентификации требуется имя пользователя`,enterTestEmail:`Введите адрес для тестового письма`,smtpServerAndEmail:`Перед проверкой укажите SMTP-сервер и адрес отправителя`,usernamePasswordRequired:`При включённой аутентификации требуются имя пользователя и пароль`,configureSmtpFirst:`Сначала настройте и проверьте SMTP`,enableAuthFirst:`Чтобы использовать почтовые функции, сначала включите аутентификацию.`},success:{settingsSaved:`Настройки SMTP сохранены`},securityOptions:{starttls:`STARTTLS (порт 587)`,ssl:`SSL/TLS (порт 465)`,none:`Без шифрования (порт 25)`},authOptions:{enabled:`Включена`,disabled:`Отключена`}},appearance:`Внешний вид`,notifications:`Уведомления`,smartPlugs:`Умные розетки`,spoolman:`Spoolman`,updates:`Обновления`,language:`Язык`,languageDescription:`Выберите предпочитаемый язык`,theme:`Тема`,themeLight:`Светлая`,themeDark:`Тёмная`,themeSystem:`Системная`,defaultView:`Страница по умолчанию`,defaultViewDescription:`Страница, которая открывается при запуске приложения`,checkForUpdates:`Проверить обновления`,autoUpdate:`Автоматическое обновление`,currentVersion:`Текущая версия`,latestVersion:`Последняя версия`,upToDate:`Установлена последняя версия`,updateAvailable:`Доступно обновление`,notificationLanguage:`Язык уведомлений`,notificationLanguageDescription:`Язык push-уведомлений`,bedCooledThreshold:`Порог остывания стола`,bedCooledThresholdDescription:`Температура, ниже которой стол после печати считается остывшим`,userNotificationsEnabled:`Пользовательские уведомления`,userNotificationsEnabledDescription:`Включить меню пользовательских и почтовых уведомлений о событиях печати. Требуется расширенная аутентификация.`,userNotificationsDisabledHint:`Для пользовательских уведомлений включите расширенную аутентификацию.`,notificationProviders:`Провайдеры уведомлений`,addProvider:`Добавить провайдера`,editProvider:`Изменить провайдера`,providerType:`Тип провайдера`,testNotification:`Проверить уведомление`,testSuccess:`Тестовое уведомление успешно отправлено`,testFailed:`Не удалось отправить тестовое уведомление`,quietHours:`Тихие часы`,quietHoursDescription:`Не беспокоить в указанный период`,quietHoursStart:`Начало`,quietHoursEnd:`Окончание`,events:{title:`События уведомлений`,printStart:`Печать началась`,printComplete:`Печать завершена`,printFailed:`Ошибка печати`,printStopped:`Печать остановлена`,printProgress:`Этапы выполнения`,printProgressDescription:`Уведомлять при 25%, 50% и 75%`,printerOffline:`Принтер не в сети`,printerError:`Ошибка принтера`,filamentLow:`Филамент заканчивается`,maintenanceDue:`Требуется обслуживание`,maintenanceDueDescription:`Уведомлять, когда наступил срок обслуживания`},smartPlug:{title:`Умные розетки`,add:`Добавить умную розетку`,edit:`Изменить умную розетку`,name:`Название`,ipAddress:`IP-адрес`,linkedPrinter:`Связанный принтер`,autoOn:`Автоматическое включение`,autoOnDescription:`Включать при начале печати`,autoOff:`Автоматическое выключение`,autoOffDescription:`Выключать после завершения печати`,offDelay:`Задержка выключения`,offDelayMinutes:`Минут после печати`,offDelayTemp:`Когда сопло остынет ниже заданной температуры`,currentState:`Текущее состояние`,turnOn:`Включить`,turnOff:`Выключить`},filamentTracking:`Учёт филамента`,filamentTrackingDesc:`Выберите способ учёта катушек: встроенный инвентарь или внешний сервер Spoolman.`,autoAddUnknownRfid:`Автоматически добавлять неизвестные RFID-катушки`,autoAddUnknownRfidDesc:`Автоматически создавать запись в инвентаре при обнаружении катушки с неизвестной RFID-меткой. Отключите, если регистрируете новые катушки заранее, чтобы избежать дубликатов.`,filamentChecks:`Проверки филамента`,disableFilamentWarnings:`Отключить предупреждения о филаменте`,disableFilamentWarningsDesc:`Не показывать предупреждения о нехватке филамента при запуске печати или добавлении в очередь`,preferLowestFilament:`Предпочитать катушку с наименьшим остатком`,preferLowestFilamentDesc:`Если подходят несколько катушек, использовать катушку с наименьшим остатком филамента`,preferLowestFilamentBackupNote:`Работает только при включённом AMS Filament Backup: иначе принтер не сможет переключиться на вторую катушку после окончания выбранной.`,trackingModeBuiltIn:`Встроенный инвентарь`,trackingModeBuiltInDesc:`Автоматическое сопоставление RFID и учёт расхода`,trackingModeSpoolmanDesc:`Внешний сервер управления филаментом`,builtInFeatureRfid:`Автоматически определяет официальные RFID-катушки Bambu Lab в AMS`,builtInFeatureUsage:`Учитывает расход филамента для каждой печати`,builtInFeatureCatalog:`Управление катушками, цветами и профилями K-фактора`,builtInFeatureThirdParty:`Сторонние катушки можно связать с катушками инвентаря`,amsSyncButton:`Синхронизировать вес из AMS`,amsSyncTitle:`Синхронизация веса катушек из AMS`,amsSyncMessage:`Вес всех катушек инвентаря будет заменён текущими значениями остатка из AMS подключённых принтеров. Используйте это для восстановления повреждённых данных о весе. Принтеры должны быть в сети.`,amsSyncing:`Синхронизация...`,amsSyncSuccess:`Синхронизировано катушек: {{synced}}, пропущено: {{skipped}}`,amsSyncError:`Не удалось синхронизировать вес из AMS`,spoolmanAmsSyncButton:`Синхронизировать вес Spoolman из AMS`,spoolmanAmsSyncTitle:`Синхронизация веса катушек Spoolman из AMS`,spoolmanAmsSyncMessage:`Вес всех катушек Spoolman будет обновлён по текущим значениям остатка из AMS подключённых принтеров. Принтеры должны быть в сети.`,spoolmanAmsSyncing:`Синхронизация...`,spoolmanAmsSyncSuccess:`Синхронизировано катушек: {{synced}}, пропущено: {{skipped}}`,spoolmanAmsSyncError:`Не удалось синхронизировать вес Spoolman из AMS`,spoolmanAmsSyncErrorUnreachable:`Не удалось синхронизировать вес Spoolman: сервер недоступен`,spoolmanAmsSyncErrorNotConfigured:`Не удалось синхронизировать вес Spoolman: сервер не настроен`,spoolmanNotConfigured:`Spoolman не настроен`,spoolmanFilamentCatalogTitle:`Каталог филамента Spoolman`,spoolmanFilamentCatalogDesc:`Названия филаментов и масса пустых катушек из Spoolman. Здесь можно изменить название и массу катушки; остальные свойства редактируются непосредственно в Spoolman.`,spoolmanUrl:`Адрес Spoolman`,spoolmanUrlHint:`Адрес сервера Spoolman, например http://localhost:7912`,spoolmanConnected:`Подключён`,spoolmanDisconnected:`Отключён`,status:`Состояние`,connect:`Подключить`,disconnect:`Отключить`,howSyncWorks:`Как работает синхронизация`,syncInfoRfidOnly:`Синхронизируются только официальные RFID-катушки Bambu Lab`,syncInfoAutoCreate:`Новые катушки автоматически создаются в Spoolman при первой синхронизации`,syncInfoThirdPartySkipped:`Неофициальные катушки Bambu Lab, сторонние и перезаправленные катушки пропускаются`,linkingExistingSpools:`Привязка существующих катушек`,linkingExistingSpoolsDesc:`Чтобы привязать существующую катушку Spoolman к AMS, наведите указатель на слот AMS и нажмите «Привязать к Spoolman».`,syncMode:`Режим синхронизации`,syncModeAuto:`Автоматически`,syncModeManual:`Только вручную`,syncModeAutoDesc:`Данные AMS синхронизируются автоматически при обнаружении изменений`,syncModeManualDesc:`Синхронизация выполняется только вручную`,syncAmsData:`Синхронизировать данные AMS`,syncAmsDataDesc:`Вручную синхронизировать данные AMS принтера со Spoolman`,allPrinters:`Все принтеры`,noDefaultPrinter:`Без принтера по умолчанию (спрашивать каждый раз)`,sidebarOrder:`Порядок пунктов боковой панели`,saveThumbnails:`Сохранять миниатюры`,captureFinishPhoto:`Снимок после завершения`,noPrintersConfigured:`Принтеры не настроены`,archiveMode:{always:`Всегда создавать запись в архиве`,never:`Не создавать запись в архиве`,ask:`Спрашивать каждый раз`},checkForUpdatesLabel:`Проверять обновления`,checkPrinterFirmware:`Проверять прошивку принтера`,includeBetaUpdates:`Включать бета-версии`,includeBetaUpdatesDesc:`Уведомлять о бета- и предварительных версиях при проверке обновлений`,localLogin:{disable:`Отключить локальный вход по имени пользователя и паролю`,disableHint:`Если включено, вход возможен только через провайдеров SSO. На LDAP это не влияет. Чтобы сохранить аварийный способ входа, задайте на сервере BAMBUDDY_LOCAL_LOGIN=true.`},enableRetry:`Включить повторные попытки`,homeAssistantDescription:`Управление умными розетками через Home Assistant`,environmentManagedLabel:`(управляется окружением)`,autoEnabledViaEnv:`Автоматически включено переменными окружения`,urlFromEnvReadOnly:`Значение задано переменной окружения HA_URL (только чтение)`,tokenFromEnvReadOnly:`Значение задано переменной окружения HA_TOKEN (только чтение)`,mqttConnectedTo:`Подключено к`,prometheusDescription:`Экспортировать данные принтеров в формате Prometheus`,noSmartPlugsTitle:`Умные розетки не настроены`,noSmartPlugsDescription:`Добавьте умную розетку на базе Tasmota для учёта энергии и автоматизации питания.`,noProvidersTitle:`Провайдеры не настроены`,noProvidersDescription:`Добавьте провайдера для получения уведомлений.`,noTemplatesAvailable:`Шаблоны отсутствуют. Перезапустите бэкенд, чтобы создать стандартные шаблоны.`,apiPermissionView:`Просмотр состояния принтеров и очереди`,apiPermissionEdit:`Добавление и удаление заданий из очереди печати`,apiKeysEmptyTitle:`Ключей API нет`,apiKeysEmptyDescription:`Создайте ключ API для интеграции с внешними сервисами.`,noUsersFound:`Пользователи не найдены`,noGroupsFound:`Группы не найдены`,noGroupsAvailable:`Доступных групп нет`,passwordsDoNotMatch:`Пароли не совпадают`,systemGroupWarning:`Названия системных групп изменить нельзя`,authDisabledTitle:`Аутентификация отключена`,authDisabledFeature1:`Требовать вход для доступа к системе`,authDisabledFeature2:`Создавать нескольких пользователей с групповыми разрешениями`,authDisabledFeature3:`Управлять доступом с помощью более чем 50 отдельных разрешений`,userHasCreated:`Этот пользователь создал:`,userItemsQuestion:`Что сделать с этими объектами?`,deleteUserConfirm:`Удалить этого пользователя?`,actionCannotBeUndone:`Это действие нельзя отменить.`,addFirstSmartPlug:`Добавить первую умную розетку`,providers:`Провайдеры`,log:`Журнал`,testAll:`Проверить все`,testResults:`Результаты проверки`,testPassedCount:`Успешно: {{count}}`,testFailedCount:`Ошибок: {{count}}`,messageTemplates:`Шаблоны сообщений`,messageTemplatesDescription:`Настройте тексты уведомлений для каждого события.`,apiKeys:`Ключи API`,apiKeysDescription:`Создавайте ключи API для внешних интеграций и вебхуков.`,createKey:`Создать ключ`,apiKeyCreated:`Ключ API успешно создан`,apiKeyCopyWarning:`Скопируйте ключ сейчас — повторно он показан не будет!`,useInApiBrowser:`Использовать в обозревателе API`,apiKeyQrButton:`QR-код`,apiKeyQrTitle:`Сканирование для настройки`,apiKeyQrCaption:`Отсканируйте мобильным приложением, чтобы добавить этот сервер и ключ API.`,apiKeyQrWarning:`QR-код содержит секретный ключ API — не передавайте его и не публикуйте снимок экрана.`,createNewApiKey:`Создать ключ API`,keyName:`Название ключа`,keyNamePlaceholder:`например, Home Assistant или OctoPrint`,readStatus:`Чтение состояния`,readStatusDescription:`Просмотр состояния принтеров, очереди, библиотеки, архива и конвейеров слайсера`,manageQueue:`Управление очередью`,manageQueueDescription:`Добавление и удаление заданий из очереди печати. Вместе с «Управление библиотекой» — запуск конвейеров слайсера`,controlPrinter:`Управление принтером`,controlPrinterDescription:`Пауза, продолжение и остановка печати`,manageLibrary:`Управление библиотекой`,manageLibraryDescription:`Загрузка, переименование, удаление и слайсинг файлов библиотеки; импорт моделей из MakerWorld. Вместе с «Управление очередью» — запуск конвейеров слайсера`,manageInventory:`Управление запасами`,manageInventoryDescription:`Создание, изменение и удаление катушек и записей учёта. Требуется для киосков SpoolBuddy: сканирование NFC, показания весов и системные команды киоска.`,manageMaintenance:`Управление обслуживанием`,manageMaintenanceDescription:`Регистрация выполненного обслуживания, сброс счётчиков, изменение интервалов и управление каталогом видов обслуживания. Подходит для автоматизаций Home Assistant, которые отмечают, например, «сопло очищено», без предоставления более широких прав управления принтером.`,manageArchives:`Управление архивом`,manageArchivesDescription:`Изменение и удаление записей архива печати, включая старые задания и их вклад в статистику. Подходит для автоматизаций очистки истории печати.`,manageProjects:`Управление проектами`,manageProjectsDescription:`Создание, изменение и удаление проектов, а также добавление в них архивных заданий. Подходит для автоматизаций, распределяющих печати по проектам.`,libraryBadge:`Библиотека`,inventoryBadge:`Запасы`,maintenanceBadge:`Обслуживание`,archivesBadge:`Архив`,projectsBadge:`Проекты`,cloudAccess:`Разрешить доступ к облаку`,cloudAccessDescription:`Чтение пресетов и филаментов Bambu Cloud от вашего имени. Требуется вход в Bambu Cloud.`,cloudBadge:`Облако`,updateEnergyCost:`Обновление тарифа на электроэнергию`,updateEnergyCostDescription:`Разрешить этому ключу отправлять новую цену за кВт⋅ч методом POST в /settings/electricity-price. Полезно для автоматизаций динамического тарифа Home Assistant (Tibber, Octopus и т. п.). Это единственный параметр настроек, доступный для записи через ключ API.`,energyCostBadge:`Энергия`,legacyKey:`Устаревший`,legacyKeyTooltip:`Создан до появления привязки к пользователям; пересоздайте для доступа к облаку`,unnamedKey:`Ключ без названия`,lastUsed:`Последнее использование`,read:`Чтение`,control:`Управление`,createFirstKey:`Создать первый ключ`,webhookEndpoints:`Конечные точки вебхуков`,webhookApiKeyHint:`Передавайте ключ API в заголовке X-API-Key.`,webhook:{getAllStatus:`Получить состояние всех принтеров`,getSpecificStatus:`Получить состояние выбранного принтера`,addToQueue:`Добавить в очередь печати`,pausePrint:`Приостановить печать`,resumePrint:`Продолжить печать`,stopPrint:`Остановить печать`},apiBrowser:`Обозреватель API`,apiBrowserDescription:`Просмотр и проверка всех доступных конечных точек API.`,apiKeyForTesting:`Ключ API для проверки`,apiKeyPlaceholder:`Вставьте ключ API для проверки защищённых конечных точек…`,apiKeyHint:`Ключ будет передан в запросе в заголовке X-API-Key.`,deleteApiKeyTitle:`Удаление ключа API`,deleteApiKeyMessage:`Удалить этот ключ API? Все использующие его интеграции перестанут работать.`,deleteKey:`Удалить ключ`,amsDisplayThresholds:`Пороговые значения AMS`,amsThresholdsDescription:`Настройте цветовые пороги индикаторов влажности и температуры AMS.`,humidity:`Влажность`,goodGreen:`Норма (зелёный)`,fairOrange:`Допустимо (оранжевый)`,aboveFairBad:`Выше допустимого порога отображается красным`,fairAlsoDryingThreshold:`Этот порог также запускает автоматическую сушку, если она включена`,fairBelowDryingFloor:`Автоматическая сушка не может достичь этого значения: при работающем нагревателе AMS показывает {{floor}} % и выше, поэтому каждый цикл завершался бы и тут же запускался снова. Установите значение выше {{floor}} %, если используете автоматическую сушку.`,temperature:`Температура`,goodBlue:`Норма (синий)`,aboveFairHot:`Выше допустимого порога отображается красным как перегрев`,tempAlarmThreshold:`Тревога выше`,tempAlarmSeparateFromBand:`Уведомления отправляет только порог тревоги — «хорошо» и «допустимо» лишь окрашивают индикатор. Оставьте поле пустым, чтобы срабатывать по допустимому порогу, как раньше.`,tempAlarmMustBePositive:`Порог 0 или меньше игнорируется — тревога срабатывает по допустимому порогу.`,historyRetention:`Хранение истории`,keepSensorHistory:`Хранить историю датчиков`,historyRetentionDescription:`Более старые данные влажности и температуры будут удаляться автоматически`,defaultPrintOptions:`Параметры печати по умолчанию`,defaultPrintOptionsDescription:`Задайте значения по умолчанию для новых заданий. Их можно изменить отдельно в диалоге запуска печати.`,defaultBedLevelling:`Калибровка стола`,defaultBedLevellingDesc:`Автоматически выровнять стол перед печатью`,defaultFlowCali:`Калибровка потока`,defaultFlowCaliDesc:`Калибровать поток экструзии`,defaultVibrationCali:`Калибровка вибраций`,defaultVibrationCaliDesc:`Уменьшить артефакты звона`,defaultLayerInspect:`Проверка первого слоя`,defaultLayerInspectDesc:`Проверка первого слоя системой компьютерного зрения`,defaultTimelapse:`Таймлапс`,defaultTimelapseDesc:`Записывать таймлапс`,defaultNozzleOffsetCali:`Калибровка смещения сопел`,defaultNozzleOffsetCaliDesc:`Калибровать взаимное смещение сопел экструдеров`,tempFanPresetsTitle:`Пресеты температуры и вентиляторов`,tempFanPresetsDescription:`Настройте значения быстрого выбора в меню температуры и скорости вентиляторов карточки принтера. Кнопка «Выкл.» отображается всегда.`,tempFanPresetsNozzle:`Температура сопла`,tempFanPresetsBed:`Температура стола`,tempFanPresetsChamber:`Температура камеры`,tempFanPresetsFan:`Скорость вентилятора`,tempFanPresetsReset:`Восстановить значения по умолчанию`,concurrentUploadsTitle:`Одновременные загрузки`,concurrentUploadsDescription:`Количество принтеров, на которые очередь может одновременно отправлять файлы. Передача файлов на принтеры выполняется медленно: крупная модель может загружаться несколько минут, а каждый принтер ждёт своей очереди. В большом парке увеличение этого значения сокращает ожидание последних принтеров в группе. Уменьшите его, если сеть или сервер Bambuddy плохо справляются с параллельной передачей.`,concurrentUploadsLabel:`Одновременно загружать на принтеры`,concurrentUploadsHelp:`Значение 1 отправляет файл только на один принтер за раз, как в прежнем режиме. По умолчанию: 4.`,staggeredStart:`Поэтапный запуск`,staggeredStartDescription:`Размер группы и интервал по умолчанию при поэтапном запуске партии на нескольких принтерах. Для каждой партии значения можно изменить в окне запуска печати.`,preheatTitle:`Преднагрев и выдержка`,preheatDescription:`Нагреть стол и, если поддерживается, камеру, затем выдержать температуру перед запуском каждого задания очереди. Полезно для инженерных пластиков (PA, ABS) на принтерах без активного нагревателя камеры: во время выдержки стол прогревает камеру излучением. Целевая температура стола берётся из файла печати; поведение камеры зависит от модели принтера.`,preheatEnabled:`Включить преднагрев и выдержку`,preheatEnabledDesc:`Если выключено, задания очереди отправляются сразу. Для каждого задания можно задать отдельное значение.`,preheatFilamentTargetsLabel:`Целевая температура камеры по типу филамента (°C)`,preheatFilamentTargetsHint:`Bambuddy выбирает наибольшее значение среди задействованных слотов AMS. Печать, для всех слотов которой получается 0 — PLA, PETG, TPU, PVA, — полностью пропускает прогрев и начинается сразу.`,preheatFilamentTargetsReset:`Восстановить значения по умолчанию`,preheatFilamentTargetsDefaultRow:`Прочее / без сопоставления`,preheatMaxWait:`Максимальное ожидание (с)`,preheatMaxWaitHelp:`Предельное время прогрева камеры, после которого процесс продолжится.`,preheatSoak:`Выдержка (с)`,preheatSoakHelp:`Время выдержки после достижения цели или истечения максимального ожидания.`,preheatHardwareTitle:`Поведение по моделям принтеров:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E активно нагревают камеру командой M141. X1C/P2S измеряют температуру камеры, но прогревают её только теплом стола. У P1S/P1P/A1/A1 Mini нет датчика камеры — применяется только таймер выдержки.`,preheatPerItemDesc:`Нагревать стол и камеру перед запуском этого задания. По умолчанию используется общий переключатель «Настройки → Рабочий процесс».`,preheatOverride_inherit:`Наследовать`,preheatOverride_on:`Включено`,preheatOverride_off:`Выключено`,calibrationMode_off:`Выключено`,calibrationMode_on:`Включено`,calibrationMode_auto:`Авто`,preheatTargetOverride:`Переопределение температуры камеры (°C; пусто — значение для филамента)`,preheatTargetOverrideHelp:`0 нагревает стол и выполняет выдержку без камеры. Если поле пустое, печать, которой камера не нужна, полностью пропускает прогрев.`,plateClear:`Подтверждение очистки пластины`,requirePlateClear:`Требовать подтверждение очистки пластины`,requirePlateClearDescription:`Если включено, планировщик не запускает следующее задание на принтере с завершённой печатью, пока не подтверждена очистка пластины. Отключение также скрывает индикатор состояния пластины и кнопку «Пластина очищена» на карточках принтеров.`,keepBedWarm:`Держать стол тёплым между печатями`,keepBedWarmDesc:`Пока ожидается подтверждение очистки пластины, стол поддерживается при указанной ниже температуре подогрева, чтобы камера оставалась тёплой, — или при температуре стола следующей печати, если она выше. Применяется только если следующая печать требует нагрева камеры (ASA, ABS, PA, PC и др.). Требуется включённое подтверждение очистки пластины.`,keepWarmBedTemp:`Температура стола при поддержании тепла (°C)`,keepWarmBedTempHelp:`Используется, когда стол служит для нагрева камеры: при поддержании тепла и при предварительном нагреве, если в файле печати нет температуры стола. Более высокая температура из файла всегда имеет приоритет.`,keepWarmMaxMinutes:`Прекратить подогрев через (минут)`,keepWarmMaxMinutesHelp:`Если пластина не освобождена за это время, нагреватели выключаются, а не остаются включёнными бесконечно.`,gcodeInjection:`Вставка G-кода`,gcodeInjectionDescription:`Настройте G-код, добавляемый в начало и/или конец печати для систем автоматического запуска, таких как Farmloop, SwapMod, AutoClear и Printflow 3D. Фрагменты задаются отдельно для каждой модели принтера и применяются, когда для задания очереди включена вставка G-кода.`,gcodeInjectionNoPrinters:`Принтеры не найдены. Добавьте принтеры, чтобы настроить фрагменты G-кода.`,gcodeStartLabel:`Начальный G-код`,gcodeEndLabel:`Завершающий G-код`,gcodeStartPlaceholder:`G-код, добавляемый перед началом печати…`,gcodeEndPlaceholder:`G-код, добавляемый после завершения печати…`,staggerGroupSize:`Размер группы`,staggerGroupSizeHelp:`Количество принтеров, запускаемых одновременно`,staggerInterval:`Интервал (мин)`,staggerIntervalHelp:`Задержка между запуском групп`,queueDrying:`Автоматическая сушка в очереди`,queueDryingDescription:`Автоматически сушить филамент в AMS, когда принтер простаивает между заданиями очереди. Запуск определяется указанным выше порогом влажности.`,queueDryingEnabled:`Включить автоматическую сушку`,queueDryingEnabledDescription:`Автоматически запускать сушку AMS, когда принтер простаивает и влажность выше порога`,queueDryingBlock:`Ожидать завершения сушки`,queueDryingBlockDescription:`Блокировать очередь печати до завершения сушки. Если выключено, печать имеет приоритет.`,ambientDryingEnabled:`Фоновая сушка`,ambientDryingEnabledDescription:`Автоматически сушить филамент на простаивающих принтерах при превышении порога влажности, даже если очередь пуста.`,printDryingEnabled:`Продолжать сушку во время печати`,printDryingEnabledDescription:`Разрешить автоматической сушке продолжаться во время печати на поддерживаемом оборудовании (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L с актуальной прошивкой). Для защиты катушек температура автоматически ограничивается на 5 °C ниже пресета сушки в простое.`,dryingPresets:`Пресеты сушки`,dryingPresetsDescription:`Температура и длительность для каждого типа филамента. AMS 2 Pro использует более низкие температуры, AMS-HT поддерживает более высокие.`,dryingFilament:`Филамент`,humidityThresholds:`Пороги влажности`,humidityThresholdsDescription:`Порог запуска автоматической сушки и предупреждений для каждого типа филамента. При смешанной загрузке AMS используется наименьший порог.`,humidityThresholdCol:`Порог`,humidityThresholdDefault:`По умолчанию (неизвестные типы)`,printModal:`Окно запуска печати`,expandCustomMapping:`Разворачивать пользовательское сопоставление`,expandCustomMappingDescription:`При печати на нескольких принтерах сразу показывать развёрнутое сопоставление AMS для каждого принтера`,authentication:`Аутентификация`,authEnabledDescription:`Доступ к экземпляру защищён аутентификацией пользователей`,authDisabledDescription:`Включите, чтобы требовать вход и управлять доступом пользователей`,authDisabledMessage:`Включите аутентификацию, чтобы создавать учётные записи, управлять правами и защитить экземпляр Bambuddy.`,enableAuthentication:`Включить аутентификацию`,currentUser:`Текущий пользователь`,changePassword:`Изменить пароль`,admin:`Администратор`,users:`Пользователи`,addUser:`Добавить пользователя`,groups:`Группы`,addGroup:`Добавить группу`,system:`Система`,noDescription:`Нет описания`,userCount:`Пользователей: {{count}}`,permissionCount:`Разрешений: {{count}}`,createUser:`Создать пользователя`,username:`Имя пользователя`,enterUsername:`Введите имя пользователя`,password:`Пароль`,enterPassword:`Введите пароль`,passwordRequirements:`Не менее 8 символов: одна заглавная и одна строчная буква, одна цифра и один специальный символ.`,confirmPassword:`Подтвердите пароль`,confirmPasswordPlaceholder:`Повторите пароль`,viewReleaseOnGitHub:`Открыть выпуск на GitHub`,turnAllPlugsOn:`Включить все розетки`,turnAllPlugsOff:`Выключить все розетки`,clearNotificationLogs:`Очистить журнал уведомлений`,clearLogsMessage:`Все записи журнала уведомлений старше 30 дней будут безвозвратно удалены. Это действие нельзя отменить.`,clearLogs:`Очистить журнал`,resetUiPreferences:`Сбросить настройки интерфейса`,resetUiPreferencesMessage:`Будут сброшены порядок боковой панели, тема, компоновка панели, режимы отображения и сортировка. Принтеры, архивы и серверные настройки НЕ изменятся. После очистки страница перезагрузится.`,resetPreferences:`Сбросить настройки`,deleteGroupTitle:`Удаление группы`,deleteGroupMessage:`Удалить эту группу? Пользователи группы потеряют назначенные ей разрешения.`,deleteGroup:`Удалить группу`,disableAuthenticationTitle:`Отключение аутентификации`,disableAuthenticationMessage:`Отключить аутентификацию? Bambuddy станет доступен без входа. Все пользователи останутся в базе данных, но проверка учётных данных выполняться не будет.`,disableAuthentication:`Отключить аутентификацию`,configureBambuddy:`Настроить Bambuddy`,systemDefault:`Системное значение`,archiveSettings:`Настройки архива`,newWindow:`Новое окно`,embeddedOverlay:`Встроенное наложение`,preferredSlicer:`Предпочитаемый слайсер`,preferredSlicerDescription:`Слайсер для нарезки внутри приложения через API-службу`,openInSlicerLabel:`Открывать в слайсере`,openInSlicerInherit:`Как для API-слайсера`,openInSlicerDescription:`Настольный слайсер, который открывается кнопкой «Открыть в слайсере». Оставьте «Как для API-слайсера», чтобы наследовать настройку, либо выберите другой локальный слайсер.`,orcaslicerKnownIssuesWarning:`В OrcaSlicer 2.3.2 и 2.4.0-dev известны ошибки CLI, мешающие нарезке многих 3MF от Bambu: #12426 (сбой на раскрашенных файлах с несколькими экструдерами) и #13386 (слишком строгая проверка диапазонов параметров). До исправления рекомендуется Bambu Studio.`,useSlicerApi:`Использовать API слайсера`,useSlicerApiDescription:`Если включено, действия «Нарезать» открывают встроенное окно и обращаются к API-службе слайсера. Если выключено, файл передаётся настольному слайсеру через URI-схему.`,slicerCard:`Слайсер`,orcaslicerApiUrl:`URL API-службы OrcaSlicer`,bambuStudioApiUrl:`URL API-службы Bambu Studio`,slicerStallTimeout:`Тайм-аут простоя слайсера (минуты)`,slicerStallTimeoutDescription:`Прервать нарезку, если sidecar не сообщает о прогрессе в течение этого времени. Тяжёлые модели, которые продолжают сообщать о прогрессе, не прерываются, сколько бы времени ни потребовалось. Для sidecar без отчёта о прогрессе это значение используется как общий лимит времени.`,slicerApiUrlDescription:`URL контейнера API-службы слайсера. Оставьте пустым, чтобы использовать значения переменных окружения SLICER_API_URL или BAMBU_STUDIO_API_URL.`,externalCameras:`Внешние камеры`,costTracking:`Учёт затрат`,billingEnabled:`Включить расчёты`,billingEnabledDescription:`Списывать с пользователей стоимость печати и включить финансовые функции`,printerKillSwitch:`Автоостановка несанкционированной печати`,printerKillSwitchDescription:`Немедленно останавливает печать, начатую без разрешения.`,financeBudgetReset:`Ежемесячный сброс финансового бюджета`,financeBudgetResetDay:`День сброса`,financeBudgetResetDayHelp:`В коротких месяцах сброс выполняется в последний день месяца.`,financeBudgetResetTimezone:`Часовой пояс сброса`,financeBudgetResetTimezoneHelp:`Начало бюджетного периода рассчитывается в этом часовом поясе.`,rebuildLedger:`Пересчитать книгу кошелька`,rebuildLedgerStarted:`Пересчёт книги запущен`,rebuildLedgerConfirmTitle:`Пересчитать книгу кошелька?`,rebuildLedgerConfirmMessage:`Книга кошелька будет пересчитана для исправления исторических значений баланса. Запускайте это действие только если понимаете его последствия.`,rebuildLedgerInProgress:`Запуск пересчёта...`,printsOnly:`Только печать`,totalConsumption:`Общее потребление`,dataManagement:`Управление данными`,storageUsage:`Использование хранилища`,storageUsageDescription:`Распределение занятого места по категориям`,storageUsageTotal:`Всего`,storageUsageErrors:`Ошибки`,storageUsageOtherBreakdown:`Прочее (статические ресурсы, скрипты и конфигурационные файлы)`,storageUsageSystem:`Система`,storageUsageData:`Данные`,storageUsageUnavailable:`Сведения об использовании хранилища недоступны`,clearNotificationLogsDescription:`Удалить записи журнала уведомлений старше 30 дней`,resetUiPreferencesDescription:`Сбросить порядок боковой панели, тему, режимы отображения и компоновку. Принтеры, архивы и настройки не изменятся.`,enableHomeAssistant:`Включить Home Assistant`,enableMqtt:`Включить MQTT`,useTls:`Использовать TLS`,enableMetricsEndpoint:`Включить endpoint метрик`,availableMetrics:`Доступные метрики`,editUser:`Изменить пользователя`,deleteUserTitle:`Удаление пользователя`,groupName:`Название группы`,leaveEmptyForAnonymous:`Оставьте пустым для анонимного доступа`,leaveEmptyForNoAuth:`Оставьте пустым, чтобы не использовать аутентификацию`,enterNewPassword:`Введите новый пароль`,confirmNewPassword:`Повторите новый пароль`,enterGroupName:`Введите название группы`,enterDescriptionOptional:`Введите описание (необязательно)`,enterCurrentPassword:`Введите текущий пароль`,enterNewPasswordMin6:`Введите новый пароль (не менее 6 символов)`,toast:{keyCopied:`Ключ скопирован в буфер обмена`,copyFailed:`Не удалось скопировать ключ`,keyAddedToBrowser:`Ключ добавлен в обозреватель API`,clearLogsFailed:`Не удалось очистить журнал`,uiPreferencesReset:`Настройки интерфейса сброшены. Обновление страницы…`,authDisabled:`Аутентификация отключена`,authDisableFailed:`Не удалось отключить аутентификацию`,apiKeyCreated:`Ключ API создан`,apiKeyDeleted:`Ключ API удалён`,userCreated:`Пользователь создан`,userUpdated:`Пользователь обновлён`,userDeleted:`Пользователь удалён`,groupCreated:`Группа создана`,groupUpdated:`Группа обновлена`,groupDeleted:`Группа удалена`,fillRequiredFields:`Заполните все обязательные поля`,passwordsDoNotMatch:`Пароли не совпадают`,passwordTooShort:`Пароль должен содержать не менее 8 символов`,passwordNeedsUppercase:`Пароль должен содержать хотя бы одну заглавную букву`,passwordNeedsLowercase:`Пароль должен содержать хотя бы одну строчную букву`,passwordNeedsDigit:`Пароль должен содержать хотя бы одну цифру`,passwordNeedsSpecial:`Пароль должен содержать хотя бы один специальный символ`,enterGroupName:`Введите название группы`,settingsSaved:`Настройки сохранены`,noPermissionUpdate:`У вас нет прав на изменение настроек`,cameraSettingsSaved:`Настройки камеры сохранены`,enterCameraUrl:`Введите URL камеры`,passwordChanged:`Пароль изменён`,connectionFailed:`Не удалось подключиться`,testFailed:`Проверка завершилась ошибкой`,cameraConnected:`Камера подключена{{resolution}}`,cameraConnectedCoalesced:`Камера подключена{{resolution}} (используется уже выполняющийся захват)`},testConnection:`Проверить подключение`,catalog:{spoolCatalog:`Каталог катушек`,spoolCatalogDescription:`Масса пустых катушек по производителю и типу. Используется для автоматического определения массы при добавлении катушек.`,searchCatalog:`Поиск по каталогу…`,addNewEntry:`Добавить запись`,namePlaceholder:`Название (например, Bambu Lab — пластик)`,weight:`Масса`,type:`Тип`,default:`Стандартная`,custom:`Пользовательская`,noMatch:`Ничего не найдено`,empty:`Каталог пуст`,deleteEntry:`Удалить запись`,deleteConfirm:`Удалить «{{name}}»?`,resetCatalog:`Сбросить каталог`,resetConfirm:`Сбросить каталог к исходному состоянию? Все пользовательские записи будут удалены.`,loadFailed:`Не удалось загрузить каталог катушек`,nameWeightRequired:`Укажите название и массу`,entryAdded:`Запись добавлена`,addFailed:`Не удалось добавить запись`,entryUpdated:`Запись обновлена`,updateFailed:`Не удалось обновить запись`,entryDeleted:`Запись удалена`,deleteFailed:`Не удалось удалить запись`,resetSuccess:`Каталог сброшен к исходному состоянию`,resetFailed:`Не удалось сбросить каталог`,exported:`Экспортировано записей: {{count}}`,imported:`Импортировано записей: {{added}}, пропущено: {{skipped}}`,importFailed:`Не удалось импортировать: неверный формат JSON`,exportTooltip:`Экспортировать каталог в JSON`,importTooltip:`Импортировать каталог из JSON`,resetTooltip:`Сбросить к исходному состоянию`,selectedCount:`Выбрано: {{count}}`,deleteSelected:`Удалить выбранные`,bulkDeleteConfirm:`Удалить выбранные записи ({{count}})?`,bulkDeleted:`Удалено записей: {{count}}`,bulkDeleteFailed:`Не удалось удалить записи`,material:`Материал`,spoolWeight:`Масса катушки`,color:`Цвет`,updateSpoolWeight:`Обновить массу катушки`,filamentUpdated:`Филамент обновлён`,filamentUpdateFailed:`Не удалось обновить филамент`,filamentUpdateInvalid:`Некорректные данные филамента`,keepExistingSpoolWeight:`Сохранить прежнюю массу у существующих катушек`,keepExistingSpoolWeightDesc:`Катушки, уже созданные с этим типом филамента, сохранят прежнюю массу тары. Для новых катушек будет использоваться обновлённое значение.`,applyToAllSpools:`Применить ко всем катушкам`,applyToAllSpoolsDesc:`Все расчёты массы для катушек этого типа немедленно начнут использовать новую массу тары.`},colorCatalog:{title:`Каталог цветов`,description:`Цвета филамента по производителю и материалу. Используются для автоматического определения цвета при добавлении катушек.`,searchColors:`Поиск цветов…`,allManufacturers:`Все производители`,addNewColor:`Добавить цвет`,manufacturer:`Производитель`,colorName:`Название цвета`,hex:`HEX`,materialOptional:`Материал (необязательно)`,showing:`Показано {{filtered}} из {{total}} цветов`,noMatch:`Подходящие цвета не найдены`,empty:`Каталог цветов пуст`,deleteColor:`Удалить цвет`,deleteConfirm:`Удалить «{{name}}»?`,resetCatalog:`Сбросить каталог цветов`,resetConfirm:`Сбросить каталог к исходному состоянию? Все пользовательские цвета будут удалены.`,sync:`Синхронизировать`,starting:`Запуск…`,syncTooltip:`Синхронизировать с FilamentColors.xyz (более 2000 цветов; может занять около минуты)`,loadFailed:`Не удалось загрузить каталог цветов`,fieldsRequired:`Укажите производителя, название цвета и HEX-код`,colorAdded:`Цвет добавлен`,addFailed:`Не удалось добавить цвет`,colorUpdated:`Цвет обновлён`,updateFailed:`Не удалось обновить цвет`,colorDeleted:`Цвет удалён`,deleteFailed:`Не удалось удалить цвет`,resetSuccess:`Каталог цветов сброшен к исходному состоянию`,resetFailed:`Не удалось сбросить каталог цветов`,syncUpToDate:`Каталог уже актуален (проверено цветов: {{count}})`,syncComplete:`Добавлено новых цветов: {{added}}, уже существовало: {{skipped}}`,syncError:`Ошибка синхронизации`,syncFailed:`Не удалось синхронизировать каталог с FilamentColors.xyz`,exported:`Экспортировано цветов: {{count}}`,imported:`Импортировано цветов: {{added}}, пропущено: {{skipped}}`,importFailed:`Не удалось импортировать: неверный формат JSON`,selectedCount:`Выбрано: {{count}}`,deleteSelected:`Удалить выбранные`,bulkDeleteConfirm:`Удалить выбранные цвета ({{count}})?`,bulkDeleted:`Удалено цветов: {{count}}`,bulkDeleteFailed:`Не удалось удалить цвета`},dateFormat:`Формат даты`,dateFormatUs:`США (ММ/ДД/ГГГГ)`,dateFormatEu:`Европа (ДД/ММ/ГГГГ)`,dateFormatIso:`ISO (ГГГГ-ММ-ДД)`,timeFormat:`Формат времени`,timeFormat12:`12-часовой (3:30 PM)`,timeFormat24:`24-часовой (15:30)`,defaultPrinter:`Принтер по умолчанию`,defaultPrinterDescription:`Предварительно выбирать этот принтер при загрузке файлов, повторной печати и других операциях.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Изменяйте порядок, видимость и пользовательские ссылки в настройках боковой панели.`,setDefault:`Сделать стандартным`,sidebarOrderSetDefaultHint:`Текущий порядок меню будет применяться к пользователям, которые ещё не настроили его самостоятельно.`,sidebarDefaultSet:`Стандартный порядок меню сохранён.`,sidebarDefaultCleared:`Стандартный порядок меню сброшен.`,sidebarDefaultFailed:`Не удалось сохранить стандартный порядок меню.`,reset:`Сбросить`,darkMode:`Тёмная тема`,lightMode:`Светлая тема`,active:`(активна)`,background:`Фон`,accent:`Акцент`,style:`Стиль`,bgNeutral:`Нейтральный`,bgWarm:`Тёплый`,bgCool:`Холодный`,bgOled:`Чёрный OLED`,bgSlate:`Сланцево-синий`,bgForest:`Лесной зелёный`,accentGreen:`Зелёный`,accentTeal:`Бирюзовый`,accentBlue:`Синий`,accentOrange:`Оранжевый`,accentPurple:`Фиолетовый`,accentRed:`Красный`,styleClassic:`Классический`,styleGlow:`Свечение`,styleVibrant:`Насыщенный`,themeToggleHint:`Переключайте тёмную, светлую и системную тему значком в боковой панели.`,progressInTitle:`Прогресс во вкладке`,progressInTitleDescription:`Показывает процент текущей печати и кольцо прогресса во вкладке браузера.`,autoArchivePrints:`Автоматически архивировать печать`,autoArchiveDescription:`Автоматически сохранять 3MF после завершения печати`,saveThumbnailsDescription:`Извлекать и сохранять изображения предпросмотра из 3MF`,captureFinishPhotoDescription:`Сделать снимок камерой принтера после завершения печати. Во время печати Bambuddy записывает короткий таймлапс, чтобы получить кадр до опускания стола. Если таймлапс был включён для задания, файл сохранится; иначе после получения снимка он будет автоматически удалён.`,finishPhotoRestorePlate:`Поднимать стол для финального снимка`,finishPhotoRestorePlateDescription:`По окончании печати принтер опускает стол примерно на 100 мм, и готовая модель оказывается ниже кадра камеры. Bambuddy поднимает стол обратно чуть выше последнего напечатанного слоя, делает снимок и снова опускает его. Пропускается, если высота печати неизвестна или в очереди есть другое задание.`,ffmpegNotInstalled:`ffmpeg не установлен`,ffmpegRequired:`Для захвата изображения требуется ffmpeg. Установите его командой <brew>brew install ffmpeg</brew> в macOS или <apt>apt install ffmpeg</apt> в Linux.`,camera:`Камера`,cameraViewMode:`Режим просмотра камеры`,cameraOverlayDescription:`Камера открывается поверх основного экрана в окне с изменяемым размером`,cameraWindowDescription:`Камера открывается в отдельном окне браузера`,externalCamerasDescription:`Настройка внешних камер вместо встроенной камеры принтера. Поддерживаются потоки MJPEG, RTSP, HTTP-снимки и USB-камеры V4L2. Внешняя камера используется для просмотра в реальном времени и снимков после завершения печати.`,cameraPlaceholderUsb:`Путь к устройству (/dev/video0)`,cameraPlaceholderUrl:`URL камеры (rtsp://… или http://…)`,cameraTypeMjpeg:`Поток MJPEG`,cameraTypeRtsp:`Поток RTSP`,cameraTypeSnapshot:`HTTP-снимок`,cameraTypeUsb:`USB-камера (V4L2)`,cameraSnapshotUrl:`URL снимка (необязательно)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`URL одиночного кадра для миниатюр уведомлений, снимков после печати, кадров послойного таймлапса и распознавания пластины. Для таймлапса и распознавания пластины должны быть отдельно включены соответствующие настройки принтера; этот URL задаёт лишь источник изображения. Оставьте пустым, чтобы получать кадры из указанного выше видеопотока. Полезно для go2rtc (/api/frame.jpeg) и IP-камер с отдельным endpoint снимка.`,cameraRotation:`Поворот`,test:`Проверить`,connected:`Подключено`,disconnected:`Отключено`,currency:`Валюта`,defaultFilamentCost:`Стоимость филамента по умолчанию (за кг)`,electricityCost:`Стоимость электроэнергии за кВт·ч`,energyDisplayMode:`Режим отображения энергии`,energyModePrintDescription:`На панели показывается сумма энергии, израсходованной во время печати`,energyModeTotalDescription:`На панели показывается полный расход энергии по данным умных розеток`,fileManager:`Файловый менеджер`,createArchiveEntry:`Создавать запись в архиве при печати`,createArchiveEntryDescription:`При запуске печати из файлового менеджера при необходимости создавать запись в архиве`,lowDiskSpaceWarning:`Предупреждение о нехватке места`,lowDiskSpaceDescription:`Показывать предупреждение, когда свободного места остаётся меньше указанного порога`,printerFirmware:`Прошивка принтера`,checkFirmwareDescription:`Проверять наличие обновлений прошивки принтера у Bambu Lab`,bambuddySoftware:`Программное обеспечение Bambuddy`,autoCheckDescription:`Автоматически проверять наличие новых версий при запуске`,checkNow:`Проверить сейчас`,updateAvailableVersion:`Доступно обновление: v{{version}}`,releaseNotes:`Примечания к выпуску`,updateViaDocker:`Обновление через Docker Compose:`,composeDirectory:`Каталог Compose`,composeDirectoryHint:`Каталог с вашим docker-compose.yml. Оставьте пустым, чтобы не добавлять cd.`,copyUpdateCommand:`Скопировать команду обновления`,updateViaHomeAssistant:`Обновления устанавливаются через Home Assistant Supervisor. Чтобы установить новую версию, откройте в Home Assistant: Настройки → Дополнения → Bambuddy.`,updateViaWindowsInstaller:`В Windows обновление выполняется повторным запуском установщика. Скачайте новую версию ниже — данные, настройки и принтеры сохранятся.`,downloadWindowsInstaller:`Скачать установщик v{{version}}`,installUpdate:`Установить обновление`,latestVersionRunning:`Установлена последняя версия`,failedToCheckUpdates:`Не удалось проверить обновления: {{error}}`,backupRestore:`Резервное копирование и восстановление`,backupRestoreDescription:`Экспорт и импорт настроек, а также резервное копирование в GitHub`,goToBackup:`Перейти к резервным копиям`,externalUrl:`Внешний URL`,externalUrlDescription:`Внешний адрес, по которому доступен Bambuddy. Используется для изображений в уведомлениях и внешних интеграций.`,bambuddyUrl:`URL Bambuddy`,externalUrlHint:`Укажите протокол и порт, например http://192.168.1.100:8000`,ftpRetry:`Повтор FTP-операций`,ftpRetryDescription:`Повторять FTP-операции при нестабильном Wi‑Fi принтера. Применяется к скачиванию 3MF и таймлапсов, загрузке заданий и обновлению прошивки.`,autoRetryDescription:`Автоматически повторять неудачные FTP-операции`,retryAttempts:`Количество попыток`,retryDelay:`Задержка между попытками`,connectionTimeout:`Тайм-аут подключения`,time_one:`{{count}} раз`,time_other:`{{count}} раз`,second_one:`{{count}} секунда`,second_other:`{{count}} секунд`,nSeconds:`{{count}} секунд`,increaseForWeakWifi:`Увеличьте для принтеров со слабым Wi‑Fi`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Подключение к Home Assistant для управления умными розетками через REST API. Поддерживаются сущности switch, light, input_boolean и script.`,homeAssistantUrl:`URL Home Assistant`,longLivedAccessToken:`Долгосрочный токен доступа`,haTokenHint:`Создайте токен в Home Assistant: Профиль → Долгосрочные токены доступа → Создать токен`,connectionSuccessful:`Подключение установлено`,connectionFailed:`Подключиться не удалось`,haConnectionSuccess:`Подключение к Home Assistant установлено.`,haConnectionFailed:`Не удалось подключиться к Home Assistant.`,mqttPublishing:`Публикация MQTT`,mqttDescription:`Публикация событий Bambuddy во внешнем MQTT-брокере для интеграции с Node-RED, Home Assistant и другими системами автоматизации.`,mqttEnableDescription:`Публиковать события во внешнем MQTT-брокере`,brokerHostname:`Имя хоста брокера`,port:`Порт`,usernameOptional:`Имя пользователя (необязательно)`,passwordOptional:`Пароль (необязательно)`,topicPrefix:`Префикс топиков`,topicPrefixHint:`Топики будут иметь вид {{prefix}}/printers/<serial>/status и т. п.`,prometheusMetrics:`Метрики Prometheus`,prometheusEndpointDescription:`Публиковать метрики принтеров по адресу <code>/api/v1/metrics</code> для мониторинга в Prometheus/Grafana.`,bearerTokenOptional:`Bearer-токен (необязательно)`,bearerTokenHint:`Если задан, запросы должны содержать <code>Authorization: Bearer <token></code>`,metricsConnectionStatus:`Состояние подключения`,metricsPrinterState:`Состояние принтера (ожидание, печать и т. п.)`,metricsPrintProgress:`Прогресс печати, 0–100 %`,metricsBedTemp:`Температура стола`,metricsNozzleTemp:`Температура сопла`,metricsPrintsTotal:`Общее количество заданий по результату`,metricsMore:`…и другие данные: слои, вентиляторы, очередь, расход филамента`,smartPlugsDescription:`Подключение умных розеток Tasmota или Home Assistant для автоматического управления питанием принтеров и учёта энергопотребления.`,allOn:`Включить все`,allOff:`Выключить все`,addSmartPlug:`Добавить умную розетку`,energySummary:`Сводка энергопотребления`,currentPower:`Текущая мощность`,plugsOnline:`Розеток в сети: {{reachable}}/{{total}}`,today:`Сегодня`,yesterday:`Вчера`,total:`Всего`,enablePlugsForSummary:`Включите розетки, чтобы увидеть сводку энергопотребления`,addNotificationProvider:`Добавить`,systemBadge:`(системная)`,creating:`Создание…`,changing:`Изменение…`,deleteUserAndItems:`Удалить пользователя И его объекты`,deleteUserKeepItems:`Удалить пользователя, объекты оставить без владельца`,ok:`ОК`,twoFa:{totpTitle:`Приложение-аутентификатор (TOTP)`,totpDesc:`Использовать приложение-аутентификатор, например Google Authenticator, Aegis или Authy.`,emailOtpTitle:`Одноразовый код по электронной почте`,emailOtpDesc:`Отправлять одноразовый код на {{email}} при входе.`,emailOtpNoEmail:`Добавьте адрес электронной почты в учётную запись, чтобы включить этот способ.`,addEmailFirst:`В вашей учётной записи нет адреса электронной почты. Перед включением одноразовых кодов попросите администратора добавить его.`,setupTotp:`Настроить приложение-аутентификатор`,setupAuthApp:`Настроить приложение-аутентификатор`,setupInstructions:`Отсканируйте QR-код приложением-аутентификатором, затем подтвердите настройку кодом.`,manualEntry:`Не получается отсканировать? Введите этот секрет вручную:`,scannedContinue:`Код отсканирован — продолжить`,enterCodeToConfirm:`Для подтверждения настройки введите шестизначный код из приложения-аутентификатора.`,activate:`Активировать`,disableTotp:`Отключить аутентификатор`,disableConfirmHint:`Чтобы отключить аутентификатор, введите действующий код TOTP или резервный код.`,totpDisabled:`Приложение-аутентификатор отключено.`,emailOtpEnabled:`Одноразовые коды по электронной почте включены.`,emailOtpDisabled:`Одноразовые коды по электронной почте отключены.`,smtpRequired:`Сначала настройте и проверьте SMTP.`,invalidCode:`Неверный код. Повторите попытку.`,enableEmailOtp:`Включить одноразовые коды по электронной почте`,disableEmailOtp:`Отключить одноразовые коды по электронной почте`,emailSetupEnterCode:`Код подтверждения отправлен на вашу электронную почту. Введите его ниже, чтобы подтвердить доступ к этому почтовому ящику.`,verifyAndEnable:`Подтвердить и включить`,emailDisablePasswordHint:`Чтобы подтвердить отключение одноразовых кодов по электронной почте, введите пароль учётной записи.`,passwordPlaceholder:`Введите пароль`,backupCodesTitle:`Сохраните резервные коды`,backupCodesWarning:`Сохраните эти коды в надёжном месте. Каждый код можно использовать только один раз; повторно они показаны не будут.`,backupCodesRemaining:`Осталось резервных кодов: {{count}}`,savedCodes:`Я сохранил коды`,regenBackup:`Создать новые резервные коды`,regenBackupHint:`Введите текущий код TOTP, чтобы создать 10 новых резервных кодов. Все существующие резервные коды станут недействительными.`,newBackupCodes:`Новые резервные коды`,linkedAccounts:`Связанные учётные записи SSO`,linkedAccountsDesc:`Эти внешние провайдеры идентификации связаны с вашей учётной записью.`,oidcUnlinked:`Учётная запись отсоединена.`},sessionPolicy:{title:`Политика сеансов`,description:`Максимальный срок действия сеанса для новых входов пользователей. Уже выданные токены сохраняют исходный срок действия.`,preset24h:`24 часа`,preset7d:`7 дней`,preset30d:`30 дней`,customHoursLabel:`Срок действия сеанса в часах`,hoursSuffix:`часов`,warning:`Длительные сеансы снижают защиту автоматическим выходом. Рекомендуется только для доверенных установок с одним пользователем.`},oidc:{title:`Провайдеры SSO / OIDC`,desc:`Настройка провайдеров OpenID Connect для единого входа через внешние службы идентификации.`,addProvider:`Добавить провайдера`,newProvider:`Новый провайдер`,empty:`Провайдеры OIDC пока не настроены.`,created:`Провайдер создан.`,updated:`Провайдер обновлён.`,deleted:`Провайдер удалён.`,refreshIcon:`Обновить значок`,removeIcon:`Удалить значок`,iconRefreshed:`Значок обновлён.`,iconRemoved:`Значок удалён.`,iconFetchFailed:`Не удалось получить значок по URL провайдера.`,deleteTitle:`Удалить провайдера`,deleteMessage:`Удалить «{{name}}»? Все связанные учётные записи пользователей будут отсоединены.`,form:{name:`Отображаемое имя`,issuerUrl:`URL издателя`,clientId:`Идентификатор клиента`,clientSecret:`Секрет клиента`,scopes:`Области доступа`,iconUrl:`URL значка (необязательно)`,enabled:`Включён`,autoCreate:`Автоматически создавать пользователей`,autoCreateDesc:`Автоматически создавать локальную учётную запись при первом входе.`,autoLink:`Автоматически связывать существующие учётные записи`,autoLinkDesc:`При первом входе связывать локальные учётные записи по совпадающему адресу электронной почты.`,secretHint:`оставьте пустым, чтобы сохранить текущий`,secretPlaceholder:`новый секрет`,emailClaim:`Поле электронной почты`,emailClaimDesc:`Поле JWT, используемое как адрес электронной почты. Для Azure Entra ID, который не передаёт email_verified, используйте preferred_username или upn. Указывайте только доверенные поля.`,emailClaimPlaceholder:`email`,emailClaimCustomClaimAutoLinkWarning:`Пользовательское поле безопасно для автоматического связывания только тогда, когда его значение назначается администратором арендатора, например upn или preferred_username в Azure Entra ID. Не включайте автоматическое связывание, если ваш IdP позволяет пользователям самостоятельно задавать это поле.`,requireEmailVerified:`Требовать подтверждённый адрес электронной почты`,requireEmailVerifiedDesc:`Принимать адрес электронной почты только в том случае, если провайдер пометил его как подтверждённый.`,requireEmailVerifiedWarning:`Предупреждение: адрес будет принят даже без подтверждения. Используйте только с доверенными провайдерами.`,requireEmailVerifiedAutoLink:`Чтобы изменить этот параметр, сначала отключите автоматическое связывание.`,defaultGroup:`Группа по умолчанию`,defaultGroupDesc:`Группа для автоматически созданных пользователей. Если не задана, используется группа «Наблюдатели».`,defaultGroupViewersFallback:`Наблюдатели (по умолчанию)`,autologin:`Автоматический вход`,autologinDesc:`Сразу перенаправлять неавторизованных посетителей к этому провайдеру. Этот флаг может быть установлен только у одного провайдера.`}},encryption:{title:`Состояние шифрования MFA`,enabledFromEnv:`Шифрование данных включено; ключ получен из переменной окружения MFA_ENCRYPTION_KEY`,enabledFromFile:`Шифрование данных включено; ключ загружен из каталога данных`,enabledGenerated:`Шифрование данных включено с автоматически созданным ключом`,notConfigured:`Шифрование хранимых данных не настроено`,notConfiguredDesc:`Секреты TOTP и client_secret провайдеров OIDC хранятся открытым текстом. Задайте MFA_ENCRYPTION_KEY или перезапустите Bambuddy с доступным для записи каталогом данных, чтобы ключ был создан автоматически.`,allEncrypted:`Все секреты MFA зашифрованы при хранении.`,legacyRowsLabel:`Старые записи открытым текстом`,encryptedRowsLabel:`Зашифрованные записи`,legacyRowsWarning:`Обнаружено старых записей открытым текстом: {{count}}. Чтобы перенести их в зашифрованное хранилище, повторно сохраните провайдера OIDC или заново подключите приложение-аутентификатор пользователя.`,backupHint:`Автоматически созданный ключ хранится в DATA_DIR/.mfa_encryption_key и включается в локальные ZIP-копии. Храните резервные копии в безопасном месте либо задайте MFA_ENCRYPTION_KEY явно.`,decryptionBrokenTitle:`Отсутствует ключ шифрования`,decryptionBrokenError:`Невозможно расшифровать записей: {{count}}, поскольку ключ шифрования больше недоступен. Для восстановления верните прежний MFA_ENCRYPTION_KEY или файл DATA_DIR/.mfa_encryption_key.`,migrationErrorWarning:`Не удалось повторно зашифровать старых записей при запуске: {{count}}. Проверьте журнал сервера и перезапустите Bambuddy для повторной попытки.`},pipelineLimits:{title:`Ограничения конвейеров слайсера`,maxCopiesLabel:`Максимум копий за запуск`,maxCopiesDesc:`Верхний предел количества копий, которое оператор может запросить при запуске конвейера. Жёсткое серверное ограничение — 1000.`},pipelines:{title:`Конвейеры слайсера`,subtitle:`Повторно используемые наборы профилей: принтер, процесс, филаменты и тип стола. Сохраните набор в окне нарезки и применяйте его к следующему файлу одним нажатием.`,loading:`Загрузка конвейеров...`,loadError:`Не удалось загрузить конвейеры.`,confirmDelete:`Удалить этот конвейер? Отменить действие нельзя.`,staleWarning:`Один или несколько связанных профилей больше не существуют. Чтобы исправить конвейер, повторно сохраните его из окна нарезки.`,empty:{title:`Конвейеров пока нет.`,howto:`Откройте окно нарезки любого файла, выберите принтер, процесс, филаменты и тип стола, затем нажмите «Сохранить как конвейер». Сохранённые конвейеры появятся здесь.`},field:{name:`Название конвейера`,description:`Описание`,targetPrinter:`Целевой принтер`,noTarget:`— Цель не задана —`,targetKind:`Тип цели`,targetKindSpecific:`Конкретный принтер`,targetKindClass:`Класс принтеров`,targetModelClass:`Модель принтера`,fanoutStrategy:`Стратегия распределения`,fanout:{max_parallel:`Максимум параллельно — распределять между любыми свободными подходящими принтерами`,round_robin:`По кругу — последовательно чередовать подходящие принтеры`,fill_one_first:`Сначала один — назначить все копии одному принтеру`},fanoutShort:{max_parallel:`параллельно`,round_robin:`по кругу`,fill_one_first:`сначала один`}},action:{save:`Сохранить`,cancel:`Отмена`,rename:`Переименовать`,delete:`Удалить`},slot:{printer:`Принтер`,process:`Процесс`,filament:`Филамент`,filamentN:`Филамент {{n}}`,filamentAll:`Все слоты: {{n}}`,bed:`Стол`},group:{profiles:`Профили`,filaments:`Филаменты`},searchPlaceholder:`Поиск конвейеров...`,filterTargetType:`Фильтр по типу цели`,filterTarget:`Фильтр по цели`,filter:{all:`Все цели`,noTarget:`Цель не задана`,count:`{{shown}} из {{total}}`,noMatches:`Нет конвейеров, соответствующих текущим фильтрам.`},toast:{saved:`Конвейер сохранён`,saveFailed:`Не удалось сохранить`,deleted:`Конвейер удалён`,deleteFailed:`Не удалось удалить`},noTargetHint:`Чтобы запустить, задайте целевой принтер`,noTargetWarning:`Перед запуском конвейера задайте целевой принтер.`,runs:{lastRun:`Последний запуск`,status:{queued:`в очереди`,slicing:`нарезка`,dispatching:`назначение`,in_progress:`печать`,completed:`завершено`,failed:`ошибка`,partial_failure:`частичная ошибка`,cancelled:`отменено`}}}},notification:{printStarted:{title:`Печать началась`,body:`{{printer}}: началась печать файла {{filename}}`},printCompleted:{title:`Печать завершена`,body:`{{printer}}: файл {{filename}} успешно напечатан`},printFailed:{title:`Ошибка печати`,body:`{{printer}}: печать файла {{filename}} завершилась ошибкой`},printStopped:{title:`Печать остановлена`,body:`{{printer}}: печать файла {{filename}} остановлена`},printProgress:{title:`Ход печати`,body:`{{printer}}: файл {{filename}} напечатан на {{percent}}%`},printerOffline:{title:`Принтер не в сети`,body:`{{printer}} не в сети`},printerError:{title:`Ошибка принтера`,body:`{{printer}}: {{error}}`},filamentLow:{title:`Заканчивается филамент`,body:`{{printer}}: осталось мало филамента`},maintenanceDue:{title:`Требуется обслуживание`,body:`{{printer}}: требуют внимания: {{items}}`}},errors:{generic:`Что-то пошло не так`,networkError:`Ошибка сети. Проверьте подключение.`,notFound:`Не найдено`,unauthorized:`Доступ не разрешён`,serverError:`Ошибка сервера`,validationError:`Проверьте введённые данные`,printerConnectionFailed:`Не удалось подключиться к принтеру`,saveFailed:`Не удалось сохранить изменения`,deleteFailed:`Не удалось удалить`,loadFailed:`Не удалось загрузить данные`},hmsErrors:{title:`Ошибки — {{name}}`,noErrors:`Ошибок нет`,viewOnWiki:`Открыть в Bambu Lab Wiki`,mqttVerifyFailedRemedy:`Включите режим разработчика на принтере, перезагрузите принтер и запустите задание снова.`,unknownCode:`Неизвестный код HMS — подробности см. в Bambu Lab Wiki.`,clearInstructions:`Устраните ошибки на принтере, чтобы они исчезли из этого списка.`,clearErrors:`Очистить ошибки`,clearSuccess:`Ошибки HMS очищены`,clearFailed:`Не удалось очистить ошибки HMS`,actionSuccess:`Команда отправлена принтеру`,actionFailed:`Не удалось отправить команду`,runoutExpectedSlot:`Филамент закончился в {{ranOut}}. Теперь принтер ожидает совместимый филамент в {{expected}}. Установите катушку в {{expected}}, затем выберите «Повторить».`,runoutExpectedSlotOnly:`Принтер ожидает совместимый филамент в {{expected}}. Установите туда катушку, затем выберите «Повторить».`,runoutSlotUnknown:`Филамент закончился, и печать приостановлена. Bambuddy не смог определить, какой слот теперь ожидает принтер. Проверьте запрошенный слот на экране принтера.`,actions:{RESUME_PRINTING:`Продолжить печать`,RESUME_PRINTING_DEFECTS:`Продолжить (дефекты допустимы)`,RESUME_PRINTING_PROBELM_SOLVED:`Продолжить (проблема устранена)`,STOP_PRINTING:`Остановить печать`,CHECK_ASSISTANT:`Проверить помощник`,FILAMENT_EXTRUDED:`Филамент выдавливается — продолжить`,RETRY_FILAMENT_EXTRUDED:`Филамент ещё не выходит — повторить`,CONTINUE:`Готово — продолжить`,LOAD_VIRTUAL_TRAY:`Загрузить филамент`,OK_BUTTON:`ОК`,FILAMENT_LOAD_RESUME:`Филамент загружен — продолжить`,JUMP_TO_LIVEVIEW:`Открыть камеру`,NO_REMINDER_NEXT_TIME:`Больше не напоминать`,REFRESH_NOZZLE:`Проверить ещё раз`,IGNORE_NO_REMINDER_NEXT_TIME:`Игнорировать и больше не напоминать`,IGNORE_RESUME:`Игнорировать и продолжить`,PROBLEM_SOLVED_RESUME:`Проблема устранена — продолжить`,TURN_OFF_FIRE_ALARM:`Понятно, отключить пожарную тревогу`,RETRY_PROBLEM_SOLVED:`Повторить (проблема устранена)`,CANCLE:`Отмена`,STOP_DRYING:`Остановить сушку`,PROCEED:`Продолжить`,OK_JUMP_RACK:`ОК`,ABORT:`Прервать`,DISABLE_PURIFICATION:`Отключить очистку воздуха для этой печати`,DONT_REMIND_NEXT_TIME:`Больше не напоминать`,DBL_CHECK_CANCEL:`Отмена`,DBL_CHECK_DONE:`Готово`,DBL_CHECK_RETRY:`Повторить`,DBL_CHECK_RESUME:`Продолжить`,DBL_CHECK_OK:`Подтвердить`,REMOVE_CLOSE_BTN:`Закрыть`}},mqttDebug:{title:`Журнал отладки MQTT`,searchPlaceholder:`Поиск по теме или содержимому...`,noMessages:`Сообщений пока нет`,startLoggingHint:`Нажмите «Начать запись», чтобы перехватывать сообщения MQTT`,noMessagesMatch:`Нет сообщений, соответствующих фильтру`,adjustFilterHint:`Измените запрос или параметры фильтра`,incoming:`Входящие`,outgoing:`Исходящие`,loggingStopped:`Запись остановлена`,loggingActive:`Запись активна — сообщения обновляются автоматически`,startLogging:`Начать запись`,stopLogging:`Остановить запись`,clearLog:`Очистить журнал`,topic:`Тема`,timestamp:`Время`,direction:`Направление`,all:`Все`},printerFiles:{zipStarted_one:`Начато скачивание ZIP для {{count}} файла`,zipStarted_other:`Начато скачивание ZIP для {{count}} файлов`,zipPartial:`Начато скачивание ZIP с {{successful}} из {{total}} файлов; остальные получить не удалось`,downloadFailed:`Ошибка скачивания: {{error}}`,unknownError:`Неизвестная ошибка`,shiftSelectHint:`Щёлкните с Shift, чтобы выбрать диапазон`,selectFile:`Выбрать {{name}}`,deselectFile:`Снять выбор с {{name}}`,title:`Файлы принтера`,storageUsed:`Занято:`,storageFree:`Свободно:`,filterPlaceholder:`Фильтр файлов...`,deleteButton:`Удалить`,deleteFiles:`Удалить файлы: {{count}}`,deleteFileConfirm:`Удалить «{{name}}»? Это действие нельзя отменить.`,deleteFilesConfirm:`Удалить выбранные файлы ({{count}})? Это действие нельзя отменить.`,noFiles:`На принтере нет файлов`,printerUnavailable:`Файловая служба принтера недоступна. Повторите попытку, когда принтер будет доступен.`,loadingFiles:`Загрузка файлов...`,failedToLoad:`Не удалось загрузить файлы`,toast:{filesDeleted:`Удалено файлов: {{count}}`,deleteFailed:`Не удалось удалить: {{error}}`}},confirm:{delete:`Удалить этот объект?`,unsavedChanges:`Есть несохранённые изменения. Всё равно уйти со страницы?`,clearQueue:`Очистить очередь печати?`},login:{title:`Вход в Bambuddy`,subtitle:`Войдите в свою учётную запись`,username:`Имя пользователя`,usernamePlaceholder:`Введите имя пользователя`,usernameOrEmail:`Имя пользователя или email`,usernameOrEmailPlaceholder:`Имя пользователя или email`,password:`Пароль`,passwordPlaceholder:`Введите пароль`,signIn:`Войти`,signingIn:`Вход...`,rememberMe:`Запомнить меня`,forgotPassword:`Забыли пароль?`,autologinFailed:`Автоматический вход через SSO не выполнен. Выберите провайдера ниже.`,localDisabledNotice:`Локальный вход отключён. Используйте одного из SSO-провайдеров ниже.`,loginSuccess:`Вход выполнен`,loginFailed:`Не удалось войти`,enterCredentials:`Введите имя пользователя и пароль`,enterEmail:`Введите адрес электронной почты`,oidcLoginFailed:`Ошибка входа через OIDC`,oidcErrors:{providerError:`Провайдер удостоверений вернул ошибку`,missingParameters:`В ответе OIDC отсутствуют обязательные параметры`,invalidState:`Состояние OIDC недействительно или уже использовано`,stateExpired:`Сеанс входа OIDC истёк — повторите попытку`,providerNotFound:`Провайдер OIDC не найден`,discoveryFailed:`Не удалось получить документ обнаружения OIDC`,invalidDiscovery:`Документ обнаружения OIDC недействителен`,networkError:`Сетевая ошибка при обмене токена OIDC`,badResponse:`Неожиданный ответ при обмене токена OIDC`,noIdToken:`Провайдер OIDC не вернул ID-токен`,validationFailed:`Не удалось проверить токен OIDC`,nonceMismatch:`Несовпадение nonce OIDC — возможна атака повторного воспроизведения`,missingSubClaim:`В токене OIDC отсутствует поле sub`,noLinkedAccount:`С этой учётной записью OIDC не связана локальная учётная запись`,accountInactive:`Учётная запись неактивна`,userResolutionFailed:`Не удалось определить учётную запись`,internalError:`Внутренняя ошибка при входе через OIDC`,tokenExchangeFailed:`Не удалось обменять токен OIDC`},forgotPasswordTitle:`Восстановление пароля`,forgotPasswordMessage:`Обратитесь к системному администратору для сброса пароля.`,forgotPasswordEmailMessage:`Введите адрес электронной почты, и мы отправим новый пароль.`,emailAddress:`Адрес электронной почты`,emailPlaceholder:`your.email@example.com`,cancel:`Отмена`,sending:`Отправка...`,sendResetEmail:`Отправить письмо для сброса`,howToReset:`Как сбросить пароль:`,resetStep1:`Свяжитесь с администратором Bambuddy`,resetStep2:`Попросите сбросить пароль в разделе управления пользователями`,resetStep3:`Администратор задаст новый временный пароль`,resetStep4:`Войдите с новым паролем и измените его в настройках`,gotIt:`Понятно`,resetPassword:{title:`Новый пароль`,subtitle:`Введите и подтвердите новый пароль.`,newPassword:`Новый пароль`,newPasswordPlaceholder:`Не менее 8 символов`,confirmPassword:`Подтверждение пароля`,confirmPasswordPlaceholder:`Повторите новый пароль`,saving:`Сохранение…`,submit:`Установить новый пароль`,backToLogin:`Вернуться ко входу`,passwordsDoNotMatch:`Пароли не совпадают`,passwordTooShort:`Пароль должен содержать не менее 8 символов`,resetFailed:`Не удалось сбросить пароль. Возможно, ссылка устарела.`},twoFA:{title:`Двухфакторная аутентификация`,subtitle:`Учётная запись защищена 2FA. Введите код подтверждения.`,methodAuthenticator:`Приложение-аутентификатор`,methodEmail:`Код по email`,methodBackup:`Резервный код`,instructionsTotp:`Откройте приложение-аутентификатор и введите шестизначный код Bambuddy.`,instructionsEmail:`Шестизначный код отправлен на вашу электронную почту. Он действует 10 минут.`,instructionsEmailNotSent:`Нажмите кнопку ниже, чтобы получить код подтверждения по email.`,instructionsBackup:`Введите один из восьмизначных резервных кодов восстановления. Каждый код используется только один раз.`,sendCodeButton:`Отправить код по email`,sendingCode:`Отправка...`,resendCode:`Отправить код повторно`,codeLabel:`Код подтверждения`,backupCodeLabel:`Резервный код`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Подтвердить`,verifyingButton:`Проверка...`,backToLogin:`← Вернуться ко входу`,orContinueWith:`или продолжить через`,signInWith:`Войти через {{provider}}`,enterCode:`Введите код подтверждения`,sendCodeFailed:`Не удалось отправить код подтверждения`,invalidCode:`Неверный код. Повторите попытку.`}},setup:{title:`Настройка Bambuddy`,subtitle:`Настройте аутентификацию для этого экземпляра Bambuddy`,enableAuth:`Включить аутентификацию`,adminAccount:`Учётная запись администратора`,adminAccountDesc:`Если администраторы уже существуют, аутентификация будет включена с использованием существующих учётных записей. Оставьте поля пустыми или введите данные для создания нового администратора.`,adminUsername:`Имя администратора`,adminPassword:`Пароль администратора`,optionalIfAdminExists:`(необязательно, если администратор уже существует)`,adminUsernamePlaceholder:`Введите имя администратора (необязательно)`,adminPasswordPlaceholder:`Введите пароль администратора (необязательно)`,confirmPassword:`Подтвердите пароль`,confirmPasswordPlaceholder:`Повторите пароль администратора`,settingUp:`Настройка...`,completeSetup:`Завершить настройку`,toast:{authEnabledAdminCreated:`Аутентификация включена, администратор создан`,authEnabledExistingAdmins:`Аутентификация включена для существующих администраторов`,setupCompleted:`Настройка завершена`,enterBothCredentials:`Введите имя и пароль администратора либо оставьте оба поля пустыми`,passwordsDoNotMatch:`Пароли не совпадают`,passwordTooShort:`Пароль должен содержать не менее 6 символов`}},changePassword:{title:`Изменение пароля`,currentPassword:`Текущий пароль`,currentPasswordPlaceholder:`Введите текущий пароль`,newPassword:`Новый пароль`,newPasswordPlaceholder:`Введите новый пароль (не менее 6 символов)`,confirmPassword:`Подтвердите новый пароль`,confirmPasswordPlaceholder:`Повторите новый пароль`,passwordsDoNotMatch:`Пароли не совпадают`,passwordTooShort:`Пароль должен содержать не менее 6 символов`,changing:`Изменение...`,success:`Пароль изменён`,failed:`Не удалось изменить пароль`},plateAlert:{title:`Печать приостановлена!`,message:`На печатной пластине обнаружены объекты. Печать автоматически приостановлена. Очистите пластину и продолжите печать.`,understand:`Понятно`},camera:{title:`Камера`,invalidPrinterId:`Неверный идентификатор принтера`,live:`Прямой эфир`,snapshot:`Снимок`,restartStream:`Перезапустить поток`,refreshSnapshot:`Обновить снимок`,fullscreen:`На весь экран`,exitFullscreen:`Выйти из полноэкранного режима`,connectingToCamera:`Подключение к камере...`,capturingSnapshot:`Создание снимка...`,connectionLost:`Соединение потеряно`,connectionFailed:`Не удалось подключиться к камере`,reconnecting:`Повторное подключение через {{countdown}} с... (попытка {{attempt}} из {{max}})`,reconnectNow:`Подключиться сейчас`,cameraUnavailable:`Камера недоступна`,cameraUnavailableDesc:`Убедитесь, что принтер включён и подключён к сети.`,noCamera:`Камера отсутствует`,retry:`Повторить`,cameraStream:`Видеопоток камеры`,zoomOut:`Уменьшить`,zoomIn:`Увеличить`,resetZoom:`Сбросить масштаб`,recording:`Запись`,startRecording:`Начать запись`,stopRecording:`Остановить запись`,chamberLight:`Переключить освещение камеры принтера`,unavailable:`Камера недоступна`,diagnose:{button:`Диагностика`,modalTitle:`Диагностика камеры`,running:`Выполняется диагностика...`,runFailed:`Не удалось выполнить диагностику: {{error}}`,retry:`Запустить снова`,stage:{tcp_reachable:`Доступность по сети`,first_frame:`Получение кадра`,live_stream_active:`Активный видеопоток`},summary:{all_ok:`Камера работает. Все этапы диагностики завершены успешно.`,live_stream_active_healthy:`Камера уже передаёт свежие кадры — дополнительная проверка не требуется.`,printer_unreachable:`Принтер недоступен. Проверьте IP-адрес, сетевое подключение и питание принтера.`,camera_port_closed:`Принтер доступен, но порт камеры закрыт. Убедитесь, что в настройках принтера включены режим «Только LAN» и режим разработчика.`,no_frame:`Подключение к камере установлено, но кадры не поступают. Повторите попытку или проверьте, включена ли камера в настройках принтера.`,unknown_failure:`Диагностика камеры завершилась неизвестной ошибкой. Подробности см. в журнале поддержки.`},meta:{protocol:`Протокол`,port:`Порт`,profile:`Профиль`}}},groups:{title:`Управление группами`,subtitle:`Настройка групп разрешений для контроля доступа`,backToSettings:`Вернуться к настройкам`,createGroup:`Создать группу`,noPermission:`У вас нет доступа к этой странице.`,system:`Системная`,noDescription:`Без описания`,usersCount:`Пользователей: {{count}}`,permissionsCount:`Разрешений: {{count}}`,edit:`Изменить`,delete:`Удалить`,toast:{created:`Группа создана`,updated:`Группа обновлена`,deleted:`Группа удалена`,enterGroupName:`Введите название группы`},modal:{editGroup:`Изменение группы`,createGroup:`Создание группы`,cancel:`Отмена`,saving:`Сохранение...`,creating:`Создание...`,saveChanges:`Сохранить изменения`},form:{groupName:`Название группы`,groupNamePlaceholder:`Введите название группы`,systemGroupWarning:`Названия системных групп изменить нельзя`,description:`Описание`,descriptionPlaceholder:`Введите описание (необязательно)`,permissions:`Разрешения (выбрано: {{count}})`},deleteModal:{title:`Удаление группы`,message:`Удалить эту группу? Входящие в неё пользователи потеряют соответствующие разрешения.`,confirm:`Удалить группу`},editor:{title:`Изменение группы`,createTitle:`Создание группы`,search:`Поиск разрешений...`,selectAll:`Выбрать все`,clearAll:`Очистить выбор`,permissionsSelected:`Выбрано: {{count}}`,noResults:`Нет разрешений, соответствующих запросу`,websocketHint:`Необходимо для обновлений в реальном времени. Без этого интерфейс будет периодически опрашивать сервер.`}},users:{title:`Управление пользователями`,subtitle:`Управление пользователями и их доступом к Bambuddy`,backToSettings:`Вернуться к настройкам`,createUser:`Создать пользователя`,noPermission:`У вас нет доступа к этой странице.`,admin:`Администратор`,noGroups:`Без групп`,active:`Активен`,inactive:`Отключён`,edit:`Изменить`,delete:`Удалить`,system:`Системный`,noGroupsAvailable:`Нет доступных групп`,table:{username:`Имя пользователя`,groups:`Группы`,status:`Состояние`,actions:`Действия`},toast:{created:`Пользователь создан`,updated:`Пользователь обновлён`,deleted:`Пользователь удалён`,fillRequired:`Заполните все обязательные поля`,passwordsDoNotMatch:`Пароли не совпадают`,passwordTooShort:`Пароль должен содержать не менее 6 символов`,ldapProvisioned:`Пользователь LDAP «{{username}}» добавлен`},modal:{createUser:`Создание пользователя`,editUser:`Изменение пользователя`,cancel:`Отмена`,creating:`Создание...`,saving:`Сохранение...`,saveChanges:`Сохранить изменения`,advancedAuthSubtitle:`с расширенной аутентификацией`,tabsAriaLabel:`Источник пользователя`,localTab:`Локальный`,ldapTab:`LDAP`,ldapSearchLabel:`Поиск в каталоге`,ldapSearchPlaceholder:`Введите имя пользователя, имя или email...`,ldapMinChars:`Для поиска введите не менее 2 символов`,ldapTypeToSearch:`Начните вводить запрос для поиска в каталоге LDAP`,ldapSearching:`Поиск в каталоге...`,ldapNoResults:`В каталоге нет подходящих пользователей`,ldapSearchError:`Ошибка поиска в каталоге. Проверьте состояние сервера LDAP.`,ldapAlreadyProvisioned:`Уже добавлен`,ldapSelectedLabel:`Выбран`,ldapProvision:`Добавить пользователя`,ldapProvisioning:`Добавление...`,ldapErrorProvision:`Не удалось добавить пользователя. Проверьте сервер LDAP и повторите попытку.`},form:{username:`Имя пользователя`,usernamePlaceholder:`Введите имя пользователя`,email:`Электронная почта`,emailPlaceholder:`user@example.com`,password:`Пароль`,passwordPlaceholder:`Введите пароль`,confirmPassword:`Подтверждение пароля`,confirmPasswordPlaceholder:`Повторите пароль`,newPasswordPlaceholder:`Введите новый пароль`,confirmNewPasswordPlaceholder:`Повторите новый пароль`,leaveBlankToKeep:`оставьте пустым, чтобы сохранить текущий`,groups:`Группы`,optional:`необязательно`,autoGeneratedPassword:`Надёжный пароль будет создан автоматически и отправлен пользователю по email.`,passwordManagedByAdvancedAuth:`Пароль управляется расширенной аутентификацией. Используйте «Сбросить пароль», чтобы отправить пользователю новый пароль по email.`,resetPassword:`Сбросить пароль`,resettingPassword:`Сброс пароля...`},deleteModal:{title:`Удаление пользователя`,message:`Удалить этого пользователя? Это действие нельзя отменить.`,confirm:`Удалить пользователя`}},streamOverlay:{title:`Оформление трансляции`,invalidPrinterId:`Неверный идентификатор принтера`,cameraStream:`Видеопоток камеры`,progress:`Прогресс`,eta:`Осталось`,printerIdle:`Принтер простаивает`,printerOffline:`Принтер не в сети`,builder:{title:`Оформление трансляции`,description:`Собирает адрес оформления трансляции: полноэкранное изображение камеры с наложенными данными о печати — для OBS, настенного экрана или любого источника-браузера. Выберите нужные поля и скопируйте адрес.`,printer:`Принтер`,size:`Размер текста`,sizeSmall:`Мелкий`,sizeMedium:`Средний`,sizeLarge:`Крупный`,fps:`Частота кадров`,fpsHint:`Камеры A1 и P1 выдают не более примерно 5 кадров в секунду, какое бы значение вы ни задали.`,token:`Токен оформления трансляции (необязательно)`,tokenHint:`Нужен только при включённом входе: у OBS нет собственного сеанса. Создайте его выше с областью «Оформление трансляции».`,tokenWarning:`Этот адрес содержит токен: любой, кто его прочитает, увидит трансляцию и имя файла. Отзовите токен, чтобы закрыть доступ.`,fields:`Показываемые поля`,fieldPrinter:`Имя принтера`,fieldFilename:`Имя файла`,fieldStatus:`Состояние`,fieldProgress:`Полоса прогресса`,fieldLayers:`Количество слоёв`,fieldEta:`Оставшееся время и время окончания`,fieldCamera:`Изображение камеры`,chamberHint:`Температура камеры показывается только на моделях с настоящим датчиком: P1 и A1 сообщают бессмысленное значение, поэтому она опускается.`,urlTitle:`Адрес оформления`,open:`Открыть`,showPreview:`Показать предпросмотр`,hidePreview:`Скрыть предпросмотр`,previewTitle:`Предпросмотр оформления`},status:{printing:`Печать`,paused:`Приостановлено`,finished:`Завершено`,failed:`Ошибка`,idle:`Ожидание`,unknown:`Неизвестно`}},profiles:{title:`Профили`,subtitle:`Управление профилями слайсера и калибровками Pressure Advance`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Локальные профили`,kprofiles:`K-профили`},orcaCloud:{connectedAs:`Подключено как`,connectedShort:`Подключено к Orca Cloud`,logout:`Отключиться`,noLogoutPermission:`У вас нет разрешения отключаться от Orca Cloud`,noConnectPermission:`У вас нет разрешения подключаться к Orca Cloud`,retry:`Повторить`,connectButton:`Подключить Orca Cloud`,connect:{title:`Подключение к Orca Cloud`,description:`Войдите в Orca Cloud, чтобы синхронизировать профили слайсера с Bambuddy.`},device:{title:`Разрешите доступ Bambuddy в Orca Cloud`,instruction:`Откройте Orca Cloud и подтвердите этот код. После подтверждения Bambuddy подключится автоматически.`,codeLabel:`Код сопряжения`,openButton:`Открыть страницу подтверждения Orca Cloud`,manualHint:`Либо откройте {{url}} и введите указанный выше код.`,waiting:`Ожидание подтверждения…`,cancel:`Отмена`},profiles:{title:`Ваши профили Orca Cloud ({{count}})`,refresh:`Обновить`,empty:`В вашей учётной записи Orca Cloud пока нет профилей.`},toast:{disconnected:`Orca Cloud отключён`},errors:{startFailed:`Не удалось начать вход в Orca Cloud.`,denied:`Сопряжение отклонено в Orca Cloud.`,expired:`Срок действия кода сопряжения истёк. Нажмите «Подключить», чтобы повторить попытку.`,pollFailed:`Соединение было потеряно во время ожидания подтверждения. Повторите попытку.`}},localProfiles:{title:`Локальные профили`,subtitle:`Импорт профилей OrcaSlicer и управление ими`,import:`Импортировать профили`,importDesc:`Перетащите сюда файлы .bbscfg, .bbsflmt, .orca_filament, .zip или .json`,importing:`Импорт...`,search:`Поиск локальных профилей...`,noPresets:`Локальных профилей пока нет`,noSearchResults:`Нет профилей, соответствующих запросу`,badge:`Локальный`,edit:`Изменить`,delete:`Удалить`,cancel:`Отмена`,deleteConfirmTitle:`Удаление профиля`,deleteConfirm:`Удалить этот профиль? Это действие нельзя отменить.`,source:`Источник`,inheritsFrom:`Наследует`,filamentType:`Тип`,vendor:`Производитель`,compatiblePrinters:`Принтеры`,nozzleTemp:`Температура сопла`,cost:`Стоимость`,density:`Плотность`,pressureAdvance:`Опережение давления`,filament:`Филамент`,process:`Процесс`,printer:`Принтер`,toast:{importSuccess:`Импортировано профилей: {{count}}`,importSkipped:`Пропущено дубликатов: {{count}}`,importError:`Ошибок при импорте: {{count}}`,deleted:`Профиль удалён`,updated:`Профиль обновлён`}},connectedAs:`Подключено как`,signInExpiredTitle:`Срок авторизации в Bambu Cloud истёк`,signInExpiredBody:`Bambu Lab больше не принимает сохранённый токен. Выполните вход снова, чтобы восстановить облачные профили, импорт из MakerWorld и проверку прошивок.`,logout:`Выйти`,noLogoutPermission:`У вас нет разрешения выходить из учётной записи`,failedToLoad:`Не удалось загрузить профили`,retry:`Повторить`,time:{justNow:`Только что`,minsAgo:`{{count}} мин назад`,hoursAgo:`{{count}} ч назад`,daysAgo:`{{count}} дн назад`},toast:{loggedOut:`Вы вышли из учётной записи`},login:{title:`Подключение к Bambu Cloud`,subtitle:`Синхронизация профилей слайсера между устройствами`,email:`Электронная почта`,password:`Пароль`,region:`Регион`,regionGlobal:`Глобальный`,regionChina:`Китай`,verificationCode:`Код подтверждения`,totpCode:`Код приложения-аутентификатора`,checkEmail:`Проверьте почту {{email}}: туда отправлен шестизначный код`,enterTotpHint:`Введите шестизначный код из приложения-аутентификатора`,accessToken:`Токен доступа`,accessTokenHint:`Вставьте токен доступа Bambu Cloud. Для учётных записей китайского региона, привязанных к телефону, доступен только этот способ: вход по email не поддерживается. Инструкцию по получению токена из cookie MakerWorld см. в wiki.`,back:`Назад`,loginButton:`Войти`,verifyButton:`Подтвердить`,setTokenButton:`Сохранить токен`,useToken:`Использовать токен доступа`,captchaTitle:`Bambu Cloud требует пройти CAPTCHA`,captchaBody:`Bambu требует от вашей сети пройти CAPTCHA, прежде чем принять вход, и ответить на эту проверку из Bambuddy невозможно. Дело не в почте и не в пароле. Блокировка привязана к вашему публичному IP-адресу и обычно снимается сама в течение нескольких часов, а повторные попытки только продлевают её. Чтобы войти сейчас, используйте токен доступа из сессии браузера.`,useEmail:`Войти по email`,toast:{loggedIn:`Вход выполнен`,codeSent:`Код подтверждения отправлен по email`,enterTotp:`Введите код из приложения-аутентификатора`,tokenSet:`Токен сохранён`}},presets:{myPreset:`Мой профиль (редактируемый)`,duplicate:`Создать копию`,editable:`Редактируемый`,failedToLoadDetails:`Не удалось загрузить сведения о профиле`,deleteConfirm:`Удалить этот профиль?`,deleteWarning:`Профиль «{{name}}» будет безвозвратно удалён из Bambu Cloud. Это действие нельзя отменить.`,noDuplicatePermission:`У вас нет разрешения копировать профили`,noEditPermission:`У вас нет разрешения редактировать профили`,noDeletePermission:`У вас нет разрешения удалять профили`,types:{filament:`Профиль филамента`,printer:`Профиль принтера`,process:`Профиль процесса`},toast:{deleted:`Профиль удалён`,created:`Профиль создан`,updated:`Профиль обновлён`,duplicated:`Копия профиля создана`,fieldAdded:`Добавлено поле «{{key}}»`,exported:`Профиль экспортирован`},baseLabel:`Базовый: {{name}}`,currentLabel:`Текущий: {{name}}`,newPreset:`Новый профиль`,editPreset:`Изменение профиля`,duplicatePreset:`Копирование профиля`,createNewPreset:`Создание профиля`,customizeSettings:`Настройте параметры нового профиля`,compareWithBase:`Сравнить с базовым профилем`,compare:`Сравнить`,basePreset:`Базовый профиль`,selectBasePreset:`Выберите базовый профиль...`,presetName:`Название профиля`,myCustomPreset:`Мой профиль`,inheritsFrom:`Наследует от`,dropJsonToImport:`Перетащите JSON для импорта`,tabs:{common:`Основные`,allFields:`Все поля`},availableFields:`Доступные поля`,searchFieldsPlaceholder:`Поиск полей...`,noMatchingFields:`Нет подходящих полей`,allFieldsAdded:`Все поля добавлены`,addCustomField:`Добавить произвольное поле`,yourOverrides:`Ваши переопределения`,noOverridesYet:`Переопределений пока нет`,clickFieldsToAdd:`Нажимайте поля слева, чтобы добавить их`,saveAsTemplate:`Сохранить как шаблон`,jsonTip:`Совет: перетащите файл .json в это окно, чтобы импортировать настройки`},cloudView:{searchPlaceholder:`Поиск профилей...`,templates:`Шаблоны`,refresh:`Обновить`,newPreset:`Новый профиль`,clearFilters:`Сбросить фильтры`,compareMode:`Режим сравнения`,selectAnotherPreset:`Выберите другой профиль типа «{{type}}»`,clickTwoPresets:`Выберите два профиля одного типа для сравнения`,selectFirst:`1. Выберите первый`,selectSecond:`2. Выберите второй`,compareNow:`Сравнить`,lastSynced:`Последняя синхронизация:`,showingCount:`Показано {{showing}} из {{total}} профилей`,noPresetsFound:`Профили не найдены`,columns:{filament:`Филамент`,process:`Процесс`,printer:`Принтер`},noFilamentPresets:`Нет профилей филамента`,noProcessPresets:`Нет профилей процесса`,noPrinterPresets:`Нет профилей принтера`,filters:{type:`Тип`,owner:`Владелец`,printer:`Принтер`,nozzle:`Сопло`,filament:`Филамент`,layer:`Слой`,all:`Все`,myPresets:`Мои профили`,builtIn:`Встроенные`,process:`Процесс`},noTemplatesPermission:`У вас нет разрешения управлять шаблонами`,noRefreshPermission:`У вас нет разрешения обновлять профили`,noCreatePermission:`У вас нет разрешения создавать профили`},templates:{title:`Быстрые шаблоны`,noTemplates:`Шаблонов пока нет`,createFirst:`Создавайте шаблоны в редакторе профилей`,typeFilter:`Тип:`,deleteTitle:`Удаление шаблона`,deleteWarning:`Это действие нельзя отменить`,deleteConfirm:`Удалить шаблон «{{name}}»?`,namePlaceholder:`Название шаблона`,descriptionPlaceholder:`Описание`,settingsJson:`Настройки (JSON)`,fieldsCount:`Полей: {{count}}`,shownInModals:`Показывается в окнах`,hiddenInModals:`Скрыт в окнах`,apply:`Применить`,toast:{deleted:`Шаблон удалён`,updated:`Шаблон обновлён`,created:`Шаблон создан`,applied:`Шаблон применён`}}},support:{debugLoggingActive:`Отладочное журналирование включено`,manageLogs:`Управление`,collectItem7:`Подключение принтеров и версии прошивок`,collectItem8:`Состояние интеграций (Spoolman, MQTT, HA)`,collectItem9:`Сетевые интерфейсы (только подсети)`,collectItem10:`Версии пакетов Python`,collectItem11:`Проверка состояния базы данных`,collectItem12:`Сведения о среде Docker`,bundleGenerating:`Формирование пакета...`,bundleStepConnection:`Проверка подключения принтеров`,bundleStepVirtualPrinters:`Проверка настройки виртуальных принтеров`,bundleStepLogScan:`Поиск известных проблем в последних журналах`,bundleStepBuild:`Создание ZIP-пакета для поддержки`},fileManager:{variants:{badge:`Версий: {{count}}`,groupAction:`Сгруппировать как версии`,groupTooltip:`Пометить эти файлы как одну задачу, нарезанную для разных принтеров`,grouped:`Файлов сгруппировано как версии: {{count}}`,printAlternatives:`Печать (вариантов: {{count}})`},title:`Файловый менеджер`,subtitle:`Организация и управление файлами для печати`,uploadFiles:`Загрузить файлы`,newFolder:`Новая папка`,folderName:`Имя папки`,folderNamePlaceholder:`например, Функциональные детали`,renameFile:`Переименовать файл`,renameFolder:`Переименовать папку`,invalidFilenameChar:`Символ «{{char}}» нельзя использовать в именах файлов печати. SD-карта принтера не принимает: < > : " / \\ | ? *`,moveFiles:`Переместить файлы ({{count}})`,rootNoFolder:`Корень (без папки)`,current:`текущая`,linkFolder:`Связать папку`,linkFolderDescription:`Связать «{{name}}» с проектом или архивом для быстрого доступа.`,project:`Проект`,archive:`Архив`,noProjectsFound:`Проекты не найдены`,noArchivesFound:`Архивы не найдены`,unlink:`Отвязать`,link:`Связать`,dragDropFiles:`Перетащите файлы сюда`,dropFilesHere:`Перетащите файлы сюда`,releaseToUpload:`Отпустите для загрузки`,orClickToBrowse:`или нажмите для выбора`,allFileTypesSupported:`Поддерживаются все типы файлов. ZIP-архивы будут распакованы.`,zipFilesDetected:`Обнаружены ZIP-архивы`,zipExtractOptions:`ZIP-архивы будут распакованы. Выберите способ обработки структуры папок:`,preserveZipStructure:`Сохранить структуру папок из ZIP`,createFolderFromZip:`Создать папку с именем ZIP-файла`,stlThumbnailGeneration:`Создание миниатюр STL`,zipMayContainStl:`ZIP-архивы могут содержать STL-файлы. Миниатюры можно создать при распаковке.`,thumbnailsCanBeGenerated:`Для STL-файлов можно создать миниатюры. Обработка крупных моделей может занять больше времени.`,generateThumbnailsForStl:`Создать миниатюры для STL-файлов`,threemfDetected:`Обнаружены файлы 3MF`,threemfExtractionInfo:`Модель принтера, материал, цвет и параметры печати будут автоматически извлечены из файлов 3MF.`,willBeExtracted:`Будут извлечены`,filesExtracted:`Извлечено файлов: {{count}}`,uploadComplete:`Загрузка завершена: успешно — {{succeeded}}`,uploadFailed:`Ошибка загрузки`,zipFilesFailed:`Не удалось обработать файлов: {{count}}`,uploading:`Загрузка...`,changeLink:`Изменить связь...`,linkTo:`Связать с...`,linkToProjectOrArchive:`Связать с проектом или архивом`,generateThumbnail:`Создать миниатюру`,generateThumbnails:`Создать миниатюры`,generateThumbnailsForMissing:`Создать отсутствующие миниатюры для STL-файлов`,gridView:`Плитка`,listView:`Список`,lowDiskSpaceWarning:`Мало свободного места`,lowDiskSpaceDetails:`Свободно только {{free}} из {{total}}. Порог предупреждения в настройках: {{threshold}} ГБ.`,files:`Файлы`,folders:`Папки`,size:`Размер`,free:`Свободно`,allFiles:`Все файлы`,allExternal:`Внешние`,externalIsEmpty:`Внешних файлов нет`,externalEmptyDescription:`Здесь появятся файлы из подключённых внешних папок.`,wrap:`Перенос строк`,enableTextWrapping:`Включить перенос строк`,disableTextWrapping:`Отключить перенос строк`,collapse:`Свернуть`,collapseFoldersByDefault:`Сворачивать папки по умолчанию`,expandFoldersByDefault:`Разворачивать папки по умолчанию`,folderSort:`Сортировка папок`,folderSortByName:`По имени`,folderSortByActivity:`По последней активности`,dragToResizeTooltip:`Перетащите для изменения размера, двойной щелчок — сброс`,searchFiles:`Поиск файлов...`,searchSubfoldersHint:`С учётом вложенных папок`,readme:{truncated:`Показано не полностью`,show:`Показать README`,hide:`Скрыть README`,label:`README`},tags:{title:`Метки`,subtitle:`Помечайте файлы для сквозной фильтрации: игрушки, безопасно для детей, только PETG и что угодно ещё.`,manage:`Метки`,manageTitle:`Управление каталогом меток`,add:`Новая метка`,edit:`Переименовать метку`,name:`Название`,fileCount:`Файлы`,empty:`Меток пока нет. Создайте первую, чтобы начать помечать файлы.`,noMatches:`Подходящие метки не найдены.`,createPlaceholder:`например, игрушки, детям, petg`,createButton:`Создать`,nameRequired:`Укажите название.`,searchPlaceholder:`Фильтр меток...`,created:`Метка создана.`,updated:`Метка переименована.`,deleted:`Метка удалена.`,saveFailed:`Не удалось сохранить метку.`,deleteFailed:`Не удалось удалить метку.`,applyFailed:`Не удалось применить метки.`,applyAdd:`Добавить метки`,applyRemove:`Удалить метки`,applyAddSuccess:`Добавлено меток: {{count}}; обработано файлов: {{files}}.`,applyRemoveSuccess:`Удалено меток: {{count}}; обработано файлов: {{files}}.`,actionAdd:`Добавить к выбранным файлам`,actionRemove:`Удалить с выбранных файлов`,tagAction:`Метки`,bulkTitle:`Метки для выбранных файлов ({{count}})`,bulkTooltip:`Добавить или удалить метки у всех выбранных файлов.`,noPermission:`У вас нет прав на изменение меток файлов.`,filterLabel:`Фильтр по меткам:`,clearAll:`Очистить всё`,confirmDelete:`Удалить метку «{{name}}»?`,confirmDeleteMessage:`Метка будет удалена из каталога. Остальные метки файлов сохранятся.`,confirmDeleteInUseMessage:`Эта метка назначена файлам ({{count}}). При удалении метка исчезнет у всех файлов; сами файлы не изменятся.`,editAria:`Изменить {{name}}`,deleteAria:`Удалить {{name}}`},allTypes:`Все типы`,prints:`Файлы печати`,ascending:`По возрастанию`,descending:`По убыванию`,showModified:`Показать даты изменения`,hideModified:`Скрыть даты изменения`,lastModified:`Изменено`,lastActivity:`Последняя активность`,resultsCount:`Показано {{showing}} из {{total}} файлов`,selectAll:`Выбрать всё`,deselectAll:`Снять выделение`,selected:`Выбрано: {{count}}`,adding:`Добавление...`,loadingFiles:`Загрузка файлов...`,folderIsEmpty:`Папка пуста`,noFilesYet:`Файлов пока нет`,folderEmptyDescription:`Загрузите или переместите файлы в эту папку.`,noFilesDescription:`Загрузите файлы, чтобы начать упорядочивать материалы для печати.`,noMatchingFiles:`Подходящие файлы не найдены`,noMatchingFilesDescription:`Нет файлов, соответствующих текущему поиску или фильтрам.`,clearFilters:`Сбросить фильтры`,printedCount:`Напечатано: {{count}}×`,uploadedBy:`Загрузил`,deleteFolder:`Удалить папку`,deleteFile:`Удалить файл`,deleteFilesCount:`Удалить файлы ({{count}})`,deleteFolderConfirm:`Удалить эту папку? Все находящиеся в ней файлы также будут удалены.`,deleteFileConfirm:`Удалить этот файл?`,deleteFilesConfirm:`Удалить выбранные файлы ({{count}})? Это действие нельзя отменить.`,deleting:`Удаление...`,noPermissionRenameFolder:`У вас нет прав на переименование папок`,noPermissionLinkFolder:`У вас нет прав на связывание папок`,noPermissionDeleteFolder:`У вас нет прав на удаление папок`,onlyEmptyFoldersDeletable:`Вы можете удалять только пустые папки`,noPermissionPrint:`У вас нет прав на запуск печати`,noPermissionAddToQueue:`У вас нет прав на добавление в очередь`,noPermissionSlice:`У вас нет прав на нарезку файлов`,noPermissionDownload:`У вас нет прав на скачивание файлов`,noPermissionPreview:`У вас нет прав на предварительный просмотр файлов`,preview3d:`3D-просмотр`,noPermissionRenameFile:`У вас нет прав на переименование этого файла`,noPermissionGenerateThumbnail:`У вас нет прав на создание миниатюр`,noPermissionDeleteFile:`У вас нет прав на удаление этого файла`,noPermissionCreateFolder:`У вас нет прав на создание папок`,noPermissionUpload:`У вас нет прав на загрузку файлов`,noPermissionMoveFiles:`У вас нет прав на перемещение файлов`,noPermissionDeleteFiles:`У вас нет прав на удаление файлов`,linkExternal:`Подключить внешнюю папку`,linkExternalFolder:`Подключить внешнюю папку`,linkExternalFolderDescription:`Подключить каталог хоста (NAS, USB-накопитель или сетевой ресурс) к файловому менеджеру. Файлы не копируются — Bambuddy обращается к ним по исходному пути.`,externalFolderNamePlaceholder:`например, Модели на NAS`,externalPath:`Путь на хосте`,externalPathHelp:`Абсолютный путь к каталогу на хосте Docker. Каталог должен быть подключён к контейнеру через bind mount.`,readOnly:`Только чтение`,readOnlyHelp:`запрещает загрузку и удаление файлов`,showHiddenFiles:`Показывать скрытые файлы (dotfiles)`,externalFolder:`Внешняя папка`,scanFolder:`Сканировать`,toast:{folderCreated:`Папка создана`,openInSlicerFailed:`Не удалось открыть в слайсере`,folderDeleted:`Папка удалена`,fileDeleted:`Файл удалён`,filesDeleted:`Удалено файлов: {{count}}`,filesMoved:`Файлы перемещены`,folderLinked:`Папка связана`,folderUnlinked:`Связь с папкой удалена`,externalFolderLinked:`Внешняя папка подключена и просканирована`,folderScanned:`Сканирование завершено: добавлено — {{added}}, удалено — {{removed}}`,addedToQueue:`Добавлено в очередь файлов: {{count}}`,addedToQueuePartial:`Добавлено файлов: {{added}}, ошибок: {{failed}}`,failedToAddToQueue:`Не удалось добавить файлы: {{error}}`,fileRenamed:`Файл переименован`,folderRenamed:`Папка переименована`,thumbnailsGenerated:`Создано миниатюр: {{count}}`,thumbnailsGeneratedPartial:`Создано миниатюр: {{succeeded}}, ошибок: {{failed}}`,noStlMissingThumbnails:`Нет STL-файлов без миниатюр`,failedToGenerateThumbnails:`Не удалось создать миниатюры: {{error}}`,thumbnailGenerated:`Миниатюра создана`,failedToGenerateThumbnail:`Не удалось создать миниатюру: {{error}}`}},projects:{parentLabel:`Родительский проект`,parentNone:`Нет (проект верхнего уровня)`,parentHint:`Вложите этот проект в другой, чтобы его показатели суммировались в главном проекте`,partOf:`Часть проекта {{name}}`,subProjectCount:`Подпроектов: {{count}}`,subProjectsOf:`Подпроекты проекта {{name}}`,collapseSubProjects:`Свернуть подпроекты`,expandSubProjects:`Развернуть подпроекты`,title:`Проекты`,subtitle:`Организация и отслеживание проектов 3D-печати`,newProject:`Новый проект`,editProject:`Изменить проект`,deleteProject:`Удалить проект`,projectName:`Название проекта`,description:`Описание`,noProjects:`Проектов пока нет`,noProjectsFiltered:`Нет проектов со статусом «{{status}}»`,noProjectsFilteredHelp:`У вас нет проектов со статусом «{{status}}». Они появятся здесь после изменения статуса.`,createFirst:`Создайте первый проект, чтобы объединять связанные печати, отслеживать ход работ и управлять сборкой.`,createFirstButton:`Создать первый проект`,create:`Создать`,files:`Файлы`,prints:`Печати`,plates:`пластин`,parts:`деталей`,lastModified:`Последнее изменение`,deleteConfirm:`Удалить этот проект? Архивные записи и элементы очереди будут отвязаны, но не удалены.`,addFiles:`Добавить файлы`,removeFile:`Убрать файл`,viewDetails:`Подробнее`,namePlaceholder:`например, Сборка Voron 2.4`,descriptionPlaceholder:`Необязательное описание...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URL должен начинаться с http:// или https://`,openExternalUrl:`Открыть страницу проекта`,coverImageLabel:`Обложка`,coverImageAlt:`Обложка проекта`,coverImageUpload:`Загрузить`,coverImageReplace:`Заменить`,coverImageRemove:`Удалить`,color:`Цвет`,targetPlates:`План по пластинам`,targetPlatesPlaceholder:`например, 25`,targetPlatesHelp:`Количество заданий печати`,targetParts:`План по деталям`,targetPartsPlaceholder:`например, 150`,targetPartsHelp:`Общее требуемое количество объектов`,targetSets:`Копий на файл`,targetSetsPlaceholder:`напр. 10`,targetSetsHelp:`Сколько раз нужно напечатать каждый печатаемый файл`,tagsLabel:`Метки (через запятую)`,tagsPlaceholder:`например, voron, функциональное, подарок`,dueDate:`Срок`,priority:`Приоритет`,priorityLow:`Низкий`,priorityNormal:`Обычный`,priorityHigh:`Высокий`,priorityUrgent:`Срочный`,statusActive:`Активный`,statusCompleted:`Завершён`,statusArchived:`В архиве`,done:`Готово`,completed:`завершено`,failed:`ошибка`,inQueue:`в очереди`,noPrintsYet:`Печатей пока нет`,printJobs:`Задания печати (пластины)`,partsPrinted:`Напечатано деталей`,failedParts:`Неудачных деталей`,import:`Импорт`,export:`Экспорт`,importProject:`Импортировать проект`,exportAll:`Экспортировать все проекты`,loading:`Загрузка проектов...`,noEditPermission:`У вас нет прав на изменение проектов`,noDeletePermission:`У вас нет прав на удаление проектов`,noCreatePermission:`У вас нет прав на создание проектов`,noImportPermission:`У вас нет прав на импорт проектов`,noExportPermission:`У вас нет прав на экспорт проектов`,toast:{created:`Проект создан`,updated:`Проект обновлён`,deleted:`Проект удалён`,imported:`Проект импортирован`,multipleImported:`Импортировано проектов: {{count}}`,importFailed:`Не удалось импортировать проект`,exported:`Проекты экспортированы (только метаданные)`}},projectDetail:{notFound:`Проект не найден`,backToProjects:`Вернуться к проектам`,export:`Экспорт`,exportProject:`Экспортировать проект`,noExportPermission:`У вас нет прав на экспорт проектов`,noEditPermission:`У вас нет прав на изменение проектов`,partOf:`Входит в:`,priorityLabel:`Приоритет:`,noPrints:`В этом проекте пока нет печатей`,status:{active:`Активный`,completed:`Завершён`,archived:`В архиве`},priority:{low:`Низкий`,normal:`Обычный`,high:`Высокий`,urgent:`Срочный`},dueDate:{overdue:`Срок истёк`,today:`Срок сегодня`,daysLeft:`Осталось дней: {{count}}`},progress:{platesProgress:`Выполнение по пластинам`,partsProgress:`Выполнение по деталям`,setsProgress:`Полные комплекты`,sets:`комплектов`,setsHint:`Комплект готов, когда каждый печатаемый файл достиг этого количества`,printJobs:`заданий печати`,parts:`деталей`,percentComplete:`Выполнено {{percent}}%`,remaining:`Осталось: {{count}}`},stats:{printJobs:`Задания печати`,total:`всего`,failed:`Неудачных: {{count}}`,partsPrinted:`Напечатано деталей: {{count}}`,printTime:`Время печати`,filamentUsed:`Израсходовано филамента`},cost:{title:`Учёт стоимости`,filamentCost:`Стоимость филамента`,energy:`Электроэнергия`,totalCost:`Общая стоимость`,total:`Итого`,includesBom:`включая спецификацию`,budget:`Бюджет`,remaining:`Остаток`},subProjects:{title:`Подпроекты ({{count}})`,jobs:`Заданий: {{count}}`},rollup:{title:`Включая подпроекты: {{count}}`,progress:`Общий прогресс`,percentComplete:`Завершено {{percent}}%`},notes:{title:`Заметки`,noEditPermission:`У вас нет прав на изменение заметок`,placeholder:`Добавьте заметки о проекте...`,empty:`Заметок пока нет. Нажмите «Изменить», чтобы добавить.`},files:{title:`Файлы`,linkFolders:`Свяжите папки из файлового менеджера`,forQuickAccess:`с этим проектом для быстрого доступа.`,fileCount:`Файлов: {{count}}`,empty:`Связанных папок нет. Откройте файловый менеджер и свяжите папку с проектом.`,printedCount:`Напечатано {{count}} раз`,progressTooltip:`{{done}} из {{target}} завершённых печатей`,noFiles:`В этой папке нет файлов.`},bom:{title:`Спецификация`,acquired:`Приобретено: {{completed}}/{{total}}`,showAll:`Показать всё`,hideDone:`Скрыть готовое`,addPart:`Добавить позицию`,noAddPermission:`У вас нет прав на добавление позиций`,partNamePlaceholder:`Название позиции (например, винты M3×8)`,partName:`Название позиции`,qty:`Кол-во`,price:`Цена ({{currency}})`,sourcingUrlPlaceholder:`Ссылка на поставщика (необязательно)`,remarksPlaceholder:`Примечание (необязательно)`,deletePart:`Удалить позицию`,deleteConfirm:`Удалить «{{name}}»?`,noUpdatePermission:`У вас нет прав на обновление позиций`,noEditPermission:`У вас нет прав на изменение позиций`,noDeletePermission:`У вас нет прав на удаление позиций`,totalCost:`Общая стоимость:`,empty:`В спецификации пока нет позиций. Добавьте крепёж, электронику и другие компоненты, закупку которых нужно отслеживать.`},timeline:{title:`Хронология активности`,empty:`Активности пока нет.`},template:{saveAsTemplate:`Сохранить как шаблон`,noCreatePermission:`У вас нет прав на создание шаблонов`},queue:{title:`Очередь`,viewAll:`Показать всё`,printing:`Печатается: {{count}}`,queued:`В очереди: {{count}}`},prints:{title:`Печати ({{count}})`},toast:{projectUpdated:`Проект обновлён`,partAdded:`Позиция добавлена`,partRemoved:`Позиция удалена`,exportFailed:`Не удалось экспортировать`,projectExported:`Проект экспортирован`,templateCreated:`Шаблон создан`}},system:{title:`Информация о системе`,version:`Версия`,uptime:`Время работы`,cpuUsage:`Загрузка процессора`,memoryUsage:`Использование памяти`,diskUsage:`Использование диска`,networkInfo:`Сетевая информация`,logs:`Журналы`,debugMode:`Режим отладки`,enableDebug:`Включить журналирование отладки`,disableDebug:`Отключить журналирование отладки`,downloadLogs:`Скачать журналы`,clearLogs:`Очистить журналы`,dockerInfo:`Информация о Docker`,containerName:`Имя контейнера`,imageName:`Имя образа`,platform:`Платформа`,architecture:`Архитектура`},sponsors:{sectionTitle:`Независимый проект на поддержке сообщества`,tagline:`Bambuddy бесплатен и остаётся таким благодаря добровольной поддержке пользователей. Без венчурного капитала и привязки к облаку.`,viewSupporters:`Посмотреть сторонников проекта`,toastPrints:`С Bambuddy выполнено печатей: {{count}}. Проект остаётся бесплатным благодаря поддержке сообщества.`,toastCost:`С помощью Bambuddy учтено филамента на сумму {{total}}. Посмотрите, кто помогает проекту оставаться независимым.`,toastArchives:`С Bambuddy архивировано печатей: {{count}}. Посмотрите, кто помогает проекту оставаться независимым.`,toastAnniversary:`Вы уже год с Bambuddy! Посмотрите, кто помогает проекту оставаться независимым.`,toastVersionUpdate:`Обновлено до версии {{version}}. Bambuddy остаётся бесплатным благодаря поддержке сообщества.`,toastBusiness:`Используете Bambuddy для {{count}} принтеров? Для команд доступен план поддержки с приоритетным исправлением ошибок, выставлением счетов и прямой связью с разработчиком.`,businessCta:`Bambuddy для бизнеса`,businessTitle:`Bambuddy для бизнеса`,businessTagline:`Вы используете {{count}} принтеров. Для команд и печатных ферм доступны приоритетная поддержка, коммерческая лицензия и выставление счетов.`},library:{title:`Библиотека филаментов`,addFilament:`Добавить филамент`,editFilament:`Изменить филамент`,deleteFilament:`Удалить филамент`,vendor:`Производитель`,material:`Материал`,color:`Цвет`,kFactor:`Коэффициент K`,temperature:`Температура`,noFilaments:`В библиотеке нет филаментов`,deleteConfirm:`Удалить этот филамент?`,importFromPrinter:`Импортировать с принтера`,exportToFile:`Экспортировать в файл`,runWithPipeline:{actionLabel:`Запустить через конвейер`,noPermission:`У вас нет прав на запуск конвейеров`,modalTitle:`Запуск через конвейер`,confirmTitle:`Подтверждение запуска`,confirmIntro:`Предварительная проверка обнаружила проблемы`,sourceHint:`Источник`,pipelineHint:`Конвейер`,targetHint:`Назначение`,pipelineListAria:`Доступные конвейеры`,runAnyway:`Всё равно запустить`,loading:`Загрузка…`,empty:`Сохранённых конвейеров пока нет. Откройте диалог нарезки и нажмите «Сохранить как конвейер».`,noTarget:`Целевой принтер не задан`,noTargetMessage:`Для этого конвейера не задан целевой принтер. Откройте его в настройках и выберите принтер.`,copies:`Копии`,copiesHint:`макс. {{n}}`,classTarget:`Любой {{model}}`,toast:{started:`Конвейер запущен`,failed:`Не удалось запустить конвейер`},issue:{printerNotSet:`Для этого конвейера не задан целевой принтер.`,printerNotFound:`Целевой принтер больше не существует.`,printerDisabled:`Целевой принтер отключён.`,printerOffline:`Целевой принтер не в сети.`,filamentType:`Слот филамента {{slot}}: ожидается {{expected}}, в AMS установлен {{actual}}`,filamentColor:`Слот филамента {{slot}}: цвет отличается (ожидается {{expected}}, в AMS установлен {{actual}})`,amsSlotMissing:`Слот AMS {{slot}} недоступен на этом принтере`,filamentUnverified:`Филамент в слоте {{slot}} выбран из облачного или стандартного профиля и не может быть проверен заранее.`,noClassMatches:`Ни один принтер в этой установке не соответствует целевому классу модели конвейера ({{expected}}).`,classNotSet:`В качестве цели конвейера выбран класс принтера, но модель не указана.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Показаны значения по умолчанию слайсера: ваш sidecar старше этой функции и не может сообщить значения профиля. Обновите образ sidecar, чтобы увидеть их. Всё, что вы не измените, по-прежнему берётся из профиля.`,presetValuesNotConfigured:`Показаны значения по умолчанию слайсера: sidecar не настроен, поэтому значения профиля прочитать нельзя. Всё, что вы не измените, по-прежнему берётся из профиля.`,presetValuesSidecarUnavailable:`Показаны значения по умолчанию слайсера: sidecar не ответил, поэтому значения профиля прочитать нельзя. Всё, что вы не измените, по-прежнему берётся из профиля.`,presetValuesUnavailable:`Показаны значения по умолчанию слайсера: значения выбранного профиля прочитать не удалось. Всё, что вы не измените, по-прежнему берётся из профиля.`,filamentDefault:`По умолчанию`,fromFile:`из файла`,fromFileHint:`Автор модели изменил этот параметр в исходном файле. Значение: {{value}}.`,fromFilePrinterCoupled:`принтер автора`,fromFilePrinterCoupledHint:`Подобрано под принтер, для которого создан файл, — на вашем значение может быть неверным или вне диапазона.`,fromFileOverridesPreset:`переопределяет пресет`,fromFileOverridesPresetHint:`В файле задано {{value}}, а выбранный пресет использует {{preset}}. Отмечайте, только если приоритет должен быть у файла.`,useFromFile:`Использовать значение из исходного файла для «{{option}}»`,otherFromFile:`Другие параметры из этого файла`,fromFileSummary:`Дизайнер изменил в этом файле {{count}} параметров процесса. Применяются только отмеченные.`,fromFileUseAll:`Использовать настройки дизайнера`,fromFileUseAllHint:`Отмечает параметры, которые переносятся на другие принтеры. Подогнанные под принтер дизайнера и задающие выбранный пресет остаются выключенными.`,fromFileClear:`Снять {{count}}`,loading:`Загрузка настроек слайсера…`,mode:{simple:`Простой`,advanced:`Расширенный`,expert:`Эксперт`},searchPlaceholder:`Поиск параметров`,resetAll:`Сбросить: {{count}}`,resetOption:`Сбросить к значению по умолчанию`,noMatches:`Нет параметров, соответствующих запросу.`},slice:{filamentSlotUnset:`не задано`,processSettingsEmbedded:`Не используется, пока включено «Использовать встроенные настройки файла» — нарезкой управляют настройки самого файла.`,processSettingsInactive:`Не активно`,presetsHidden:`скрыто: {{count}}`,showAllPresets:`Показать все`,showFewerPresets:`Показать меньше`,processSettings:`Параметры процесса`,processSettingsHint:`Настройте выбранный профиль для этой нарезки. Всё, что вы не измените, останется как задано в профиле.`,processSettingsChanged:`изменено: {{count}}`,processSettingsUnchanged:`Значения профиля`,title:`Нарезка модели`,action:`Нарезать`,actionAll:`Нарезать все пластины ({{count}})`,actionAllTitle:`Нарезать все пластины в один многостольный результат и сохранить в одном архиве. Выбор филаментов охватывает все слоты, используемые проектом.`,allPlatesToggle:`Нарезать все пластины ({{count}})`,slicing:`Нарезка…`,printer:`Профиль принтера`,process:`Профиль процесса`,filament:`Профиль филамента`,filamentSlot:`Филамент {{index}} ({{type}})`,filamentColour:`Цвет филамента`,selectPreset:`— Выберите профиль —`,loadingPresets:`Загрузка профилей…`,analyzingPlateFilaments:`Анализ филаментов пластины…`,analyzingPlateFilamentsHint:`Выполняется предварительная нарезка, чтобы определить, какие слоты AMS используются на этой пластине. Результат кэшируется, поэтому повторное открытие будет мгновенным.`,previewToast:`Анализ {{name}} — {{elapsed}}`,previewWithProgress:`Анализ {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— не используется на этой пластине`,noPresetsForSlot:`Нет доступных профилей`,otherPrinters:`Другие принтеры`,presetsLoadFailed:`Не удалось загрузить профили. Сначала импортируйте их в разделе «Настройки → Профили».`,refreshPresets:`Обновить`,refreshPresetsTitle:`Обновить профили — получить свежие облачные и встроенные списки. Используйте после удаления профиля в Bambu Studio или Bambu Handy.`,allPresetsRequired:`Необходимо выбрать все профили`,useEmbedded:`Использовать встроенные настройки файла`,useEmbeddedHint:`Нарезать так, как задумал автор модели (стенки, заполнение, филамент), вместо профилей выше. Доступно, потому что ваш принтер совпадает с указанным в файле.`,autoOrient:`Автоматически ориентировать объекты`,autoOrientHint:`Слайсер повернёт каждый объект на сторону, которая печатается лучше всего. Ориентация из файла будет заменена.`,autoArrange:`Автоматически разместить на столе`,autoArrangeHint:`Слайсер расставит объекты так, чтобы они не перекрывались. Расположение из файла будет заменено.`,enqueuing:`Отправка задания на нарезку…`,queued:`В очереди…`,failed:`Ошибка нарезки. Проверьте журналы вспомогательного сервиса слайсера.`,startedToast:`Фоновая нарезка {{name}}…`,queuedToast:`В очереди: {{name}} — {{elapsed}}`,runningToast:`Нарезка {{name}} — {{elapsed}}`,runningWithProgress:`{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,runningWithProgressMultiPlate:`Пластина {{plateIndex}} из {{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,completedToast:`Нарезка {{name}} завершена`,externalWriteFallbackToast:`Сохранено во внутренней библиотеке: не удалось записать во внешнюю папку`,failedTitle:`Ошибка нарезки`,failedToast:`Не удалось нарезать {{name}}: {{detail}}`,tier:{local:`Импортированные`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Стандартные`},cloud:{notAuthenticated:`Войдите в Bambu Cloud («Настройки → Профили → Bambu Cloud»), чтобы увидеть облачные профили.`,expired:`Сессия Bambu Cloud истекла. Войдите снова, чтобы обновить облачные профили.`,unreachable:`Bambu Cloud сейчас недоступен. Локальные и стандартные профили продолжат работать.`},orcaCloud:{notAuthenticated:`Войдите в Orca Cloud («Профили → Orca Cloud»), чтобы увидеть профили Orca.`,expired:`Сессия Orca Cloud истекла. Войдите снова, чтобы обновить профили Orca.`,unreachable:`Orca Cloud сейчас недоступен. Остальные профили продолжат работать.`},bedType:{label:`Печатная пластина`,auto:`Авто (из профиля процесса)`,coolPlate:`Холодная пластина`,coolPlateSuperTack:`Холодная пластина SuperTack`,engineering:`Инженерная пластина`,highTemp:`Высокотемпературная пластина`,texturedPEI:`Текстурированная PEI-пластина`,smoothPEI:`Гладкая PEI-пластина`},pipelines:{label:`Конвейер`,applyAria:`Применить конвейер`,applyPrompt:`Применить конвейер…`,empty:`Нет сохранённых конвейеров`,saveButton:`Сохранить как конвейер`,saveTitle:`Сохранить текущий набор из четырёх профилей как повторно используемый конвейер`,namePlaceholder:`Название конвейера`,nameAria:`Название нового конвейера`,toast:{applied:`Применён конвейер «{{name}}»`,saved:`Конвейер сохранён`,saveFailed:`Не удалось сохранить`}}},spoolman:{title:`Интеграция со Spoolman`,enabled:`Spoolman включён`,url:`URL Spoolman`,connected:`Подключено`,disconnected:`Нет подключения`,testConnection:`Проверить подключение`,sync:`Синхронизировать`,syncing:`Синхронизация…`,lastSync:`Последняя синхронизация`,linkToSpoolman:`Связать со Spoolman`,openInSpoolman:`Открыть в Spoolman`,unlinkSpool:`Отвязать катушку`,unlinkConfirmTitle:`Снять назначение катушки?`,unlinkConfirmMessage:`Катушка будет удалена из этого слота. Данные самой катушки останутся без изменений.`,selectSpool:`Выбрать катушку`,noUnlinkedSpools:`Нет свободных катушек`,linkSuccess:`Катушка успешно назначена`,linkFailed:`Не удалось назначить катушку`,unlinkSuccess:`Назначение катушки снято`,unlinkFailed:`Не удалось снять назначение катушки`,linkedSpool:`Назначенная катушка`,spoolId:`ID катушки`,fillSourceLabel:`(Spoolman)`,weight:`Масса`,remaining:`Остаток`,disableWeightSync:`Отключить синхронизацию расчётной массы AMS`,disableWeightSyncDesc:`Не обновлять остаток по оценке AMS. Используйте это, если предпочитаете учёт расхода Spoolman процентной оценке AMS. Для новых катушек оценка AMS всё равно будет использована как начальная масса.`,reportPartialUsage:`Учитывать частичный расход при неудачной печати`,reportPartialUsageDesc:`Если печать завершилась ошибкой или была отменена, учитывать примерный расход филамента до этого момента по прогрессу слоёв.`},locations:{title:`Места хранения`,subtitle:`Управление полками, ящиками и другими физическими местами хранения катушек`,add:`Добавить место`,addShort:`Добавить`,edit:`Изменить место`,name:`Название`,spools:`Катушки`,sensors:`Датчики`,empty:`Мест хранения пока нет. Создайте первую полку или ящик.`,manage:`Места хранения`,createPlaceholder:`например, Полка A или Ящик 1`,nameRequired:`Укажите название места хранения`,created:`Место хранения создано`,updated:`Место хранения обновлено`,deleted:`Место хранения удалено`,saveFailed:`Не удалось сохранить место хранения`,deleteFailed:`Не удалось удалить место хранения`,deleteBlocked:`Перед удалением переместите из этого места все катушки`,confirmDelete:`Удалить «{{name}}»?`,confirmDeleteMessage:`Это место будет удалено из каталога. Сначала необходимо переместить все катушки.`,confirmDeleteMessageWithSensors:`Это место будет удалено из каталога. Сначала необходимо переместить все катушки. Подключённые датчики также будут удалены.`},inventory:{title:`Учёт катушек`,subtitle:`Управление катушками`,addToInventory:`Добавить в учёт`,addToInventoryPending:`Добавление…`,addToInventorySuccess:`Катушка добавлена в учёт`,addToInventoryFailed:`Не удалось добавить катушку в учёт`,unknownSpoolTitle:`Обнаружен новый филамент`,unknownSpoolMessage:`В {{location}} обнаружена катушка с неизвестной RFID-меткой. Добавить её в учёт?`,unknownSpoolSlot:`Слот`,bulk:{selectAllVisible:`Выбрать все видимые`,selectRow:`Выбрать строку`,selectGroup:`Выбрать группу`,selectionCount:`Выбрано: {{count}}`,edit:`Изменить`,printLabels:`Печать этикеток`,resetUsage:`Сбросить расход`,restore:`Восстановить`,archive:`Архивировать`,delete:`Удалить`,clearSelection:`Снять выделение`,editTitle:`Массовое изменение катушек`,editSubtitle:`Изменения применятся к {{count}} выбранным катушкам. Обновятся только отмеченные поля.`,editHint:`Введите значение в поле, чтобы включить его обновление. Будут отправлены только отмеченные строки. Пустое поле не изменяет катушки; очистить значение можно только при редактировании отдельной катушки.`,useCustom:`Использовать «{{value}}»`,toggleField:`Включить или отключить обновление этого поля`,changeCount:`Будет обновлено полей: {{count}}.`,applyPending:`Применение…`,applyButton:`Применить к {{count}} катушкам`,deleteTitle:`Удалить выбранные катушки`,archiveTitle:`Архивировать выбранные катушки`,restoreTitle:`Восстановить выбранные катушки`,resetUsageTitle:`Сбросить расход выбранных катушек`,deleteMessage:`Безвозвратно удалить {{count}} катушек? Это действие нельзя отменить.`,archiveMessage:`Архивировать {{count}} катушек? Позже их можно будет восстановить.`,restoreMessage:`Восстановить {{count}} архивных катушек?`,resetUsageMessage:`Сбросить счётчик «Израсходовано всего» у {{count}} катушек? Текущий остаток массы сохранится.`,updateSuccess:`Обновлено катушек: {{count}}`,updateFailed:`Ошибка массового обновления`,updatePartial:`Обновлено: {{ok}}, с ошибкой: {{failed}}`,updateAllFailed:`Не удалось обновить все {{count}} катушек. Выделение сохранено для повторной попытки.`,deleteSuccess:`Удалено катушек: {{count}}`,deleteFailed:`Ошибка массового удаления`,deletePartial:`Удалено: {{ok}}, с ошибкой: {{failed}}`,deleteAllFailed:`Не удалось удалить все {{count}} катушек. Выделение сохранено для повторной попытки.`,archiveSuccess:`Архивировано катушек: {{count}}`,archiveFailed:`Ошибка массового архивирования`,archivePartial:`Архивировано: {{ok}}, с ошибкой: {{failed}}`,archiveAllFailed:`Не удалось архивировать все {{count}} катушек. Выделение сохранено для повторной попытки.`,restoreSuccess:`Восстановлено катушек: {{count}}`,restoreFailed:`Ошибка массового восстановления`,restorePartial:`Восстановлено: {{ok}}, с ошибкой: {{failed}}`,restoreAllFailed:`Не удалось восстановить все {{count}} катушек. Выделение сохранено для повторной попытки.`,invalidHex:`Введите 6 шестнадцатеричных символов (RRGGBB) или 8 (RRGGBBAA), иначе поле не будет применено.`},spoolmanMixedContentTitle:`Spoolman не загружается через HTTPS: браузер заблокировал смешанное содержимое`,spoolmanMixedContentBody:`Bambuddy открыт через HTTPS (через обратный прокси), а URL Spoolman всё ещё использует обычный HTTP. Браузер блокирует такое смешанное содержимое, поэтому встроенный интерфейс Spoolman не отображается. Для работы Spoolman должен быть доступен по HTTPS.`,spoolmanMixedContentFixReverseProxy:`Разместите Spoolman за тем же обратным прокси, что и Bambuddy (Traefik / Nginx / Caddy), включите HTTPS и укажите новый HTTPS-адрес Spoolman в настройках.`,spoolmanMixedContentFixOpenNewTab:`В качестве обходного решения откройте Spoolman по HTTP в новой вкладке. Ограничение смешанного содержимого действует только для встроенных фреймов.`,spoolmanOpenInNewTab:`Открыть Spoolman в новой вкладке`,labels:{title:`Печать этикеток катушек`,selectedCount:`Выбрано: {{count}}`,pickSpools:`Выберите катушки для печати этикеток:`,monochrome:`Монохромный режим (чёрно-белый принтер)`,monochromeHint:`Убирает образец цвета и расширяет область текста`,startingPosition:`Начальная позиция этикетки`,startingPositionRange:`Только для листовых шаблонов: L7160 — 1–21; 5160 — 1–30.`,startingPositionInvalid:`Введите целое число от 1 до {{capacity}}.`,startingPositionFirst:`Печать начинается с позиции 1.`,startingPositionSkipped:`Позиции с 1 по {{lastPosition}} останутся пустыми на первом листе.`,startingPositionRangeError:`Начальная позиция для этого листа должна быть от 1 до {{capacity}}.`,searchPlaceholder:`Поиск по названию, бренду или #ID`,filterByMaterial:`Материал:`,allMaterials:`Все`,selectVisible:`Выбрать все видимые ({{count}})`,deselectVisible:`Снять выделение с видимых`,clearAll:`Очистить выбор`,noSpoolsToShow:`Нет катушек для отображения. Измените фильтр и повторите попытку.`,noMatches:`Нет катушек, соответствующих поиску или фильтру.`,printOne:`Напечатать этикетку этой катушки`,printLabels:`Печать этикеток…`,bulkTitle:`Выберите катушки для печати этикеток из {{count}} отображаемых`,noSpoolsTitle:`Нет катушек для печати этикеток`,error:`Не удалось создать этикетки: {{msg}}`,sortBy:{label:`Сортировка:`,id:`По ID`,color:`По цвету`},templates:{amsHolderSmall:{label:`Держатель AMS — малый (74 × 33 мм)`,hint:`Одна этикетка на страницу; соответствует печатной этикетке для модели MakerWorld 752566 (AMS Filament Label Holder).`},amsHolderLarge:{label:`Держатель AMS — большой (75 × 55 мм)`,hint:`Одна этикетка на страницу; подходит для варианта держателя AMS с картонной вставкой. Достаточно места для образца цвета, бренда, материала, ID и QR-кода.`},box40x30:{label:`Этикетка для коробки (40 × 30 мм)`,hint:`Одна этикетка на страницу; распространённый размер рулона DK/Brother, подходит для пакетов с филаментом и контейнеров хранения.`},box:{label:`Этикетка для коробки (62 × 29 мм)`,hint:`Одна этикетка на страницу; размер для малых этикеток Brother PT/QL и Dymo.`},averyL7160:{label:`Avery L7160 — лист A4 (38,1 × 63,5 мм × 21)`,hint:`Европейский формат: 21 этикетка на листе A4.`},avery5160:{label:`Avery 5160 — лист US Letter (25,4 × 66,7 мм × 30)`,hint:`Американский формат: 30 этикеток на листе Letter.`}}},csv:{importButton:`Импорт CSV`,exportButton:`Экспорт CSV`,modalTitle:`Импорт катушек из CSV`,selectFile:`Выберите CSV-файл или перетащите его сюда`,dragHint:`Заголовок: material (обязательно), brand, subtype, color_name, rgba, …`,parsing:`Чтение файла…`,previewError:`Не удалось прочитать CSV-файл`,validCount:`Корректных: {{count}}`,errorCount:`Ошибок: {{count}}`,skippedCount:`Пропущено: {{count}}`,colRow:`Строка`,colStatus:`Состояние`,colColor:`Цвет`,colorResolved:`Цвет подставлен из каталога`,colorCrossMaterial:`Цвет взят у другого материала: точного совпадения в каталоге нет`,duplicateExisting:`Катушка с таким материалом, брендом и цветом уже существует, но запись всё равно будет импортирована как новая катушка`,spoolmanHint:`В режиме Spoolman используйте встроенный импорт и экспорт CSV в Spoolman.`,importValidRows:`Импортировать {{count}} корректных строк`,noValidRows:`Нет корректных строк`,importing:`Импорт…`,importSuccess:`Импортировано катушек: {{count}}`,importError:`Ошибка импорта`,exportError:`Ошибка экспорта`},addSpool:`Добавить катушку`,editSpool:`Изменить катушку`,copySpool:`Копировать катушку`,material:`Материал`,selectMaterial:`Выберите материал…`,subtype:`Подтип`,brand:`Бренд`,searchBrand:`Поиск бренда…`,useCustomBrand:`Использовать «{{brand}}»`,useCustomMaterial:`Использовать свой материал: {{material}}`,suggestedOptions:`Рекомендуемые`,allOptions:`Все`,colorName:`Название цвета`,colorNamePlaceholder:`Jade White, Fire Red…`,color:`Цвет`,hexColor:`Цвет HEX`,pickColor:`Выбрать свой цвет`,labelWeight:`Номинальная масса`,coreWeight:`Масса пустой катушки`,searchSpoolWeight:`Поиск массы катушки…`,weightUsed:`Израсходовано`,currentWeight:`Остаток массы`,measuredWeight:`Измеренная масса`,spoolName:`Катушка`,costPerKg:`Стоимость за кг`,storageLocation:`Место хранения`,temperature:`Температура`,humidity:`Влажность`,battery:`Батарея`,storageLocationPlaceholder:`например, Полка A, Ящик 1`,openInInventory:`Открыть в учёте`,measuredWeightError:`Измеренная масса должна быть от {{min}} до {{max}} г.`,slicerFilament:`Филамент слайсера`,slicerFilamentName:`Название пресета слайсера`,slicerPreset:`Пресет слайсера`,searchPresets:`Поиск пресетов филамента…`,selectedPreset:`Выбрано`,noPresetsFound:`Пресеты не найдены`,tempOverrides:`Переопределение температур`,note:`Примечание`,notePlaceholder:`Дополнительные сведения об этой катушке…`,category:`Категория`,categoryPlaceholder:`например, Производство, Прототип, Клиент A`,categoryNone:`Без категории`,storageLocationNone:`Место не указано`,lowStockThresholdOverride:`Порог малого остатка (эта катушка)`,lowStockThresholdOverrideHelp:`Оставьте пустым, чтобы использовать общий порог ({{global}}%).`,clearRfid:`Очистить RFID-метку`,rfidCleared:`RFID-метка очищена`,archive:`Архивировать`,restore:`Восстановить`,noSpools:`Катушек пока нет. Добавьте первую катушку.`,noAvailableSpools:`Нет доступных катушек. Добавьте катушку в учёт или сначала освободите её в другом слоте.`,kProfiles:`K-профили`,addKProfile:`Добавить K-профиль`,assignSpool:`Назначить катушку`,unassignSpool:`Снять назначение`,assignSuccess:`Катушка назначена, слот AMS настроен`,assignPendingInsert:`Катушка назначена. Слот будет настроен после её установки.`,assignFailed:`Не удалось назначить катушку`,selectSpool:`Выберите катушку для назначения этому слоту`,assigned:`Назначено`,assigning:`Назначение…`,searchSpools:`Поиск катушек…`,showAllSpools:`Показать все катушки`,spoolmanSpools:`Катушки Spoolman`,allMaterials:`Все материалы`,filterByBrand:`Фильтр по бренду…`,showArchived:`Показывать архивные`,quickAdd:`Быстрое добавление`,quantity:`Количество`,stock:`На складе`,configured:`Настроено`,spoolsCreated:`Создано катушек: {{count}}`,spoolsPartiallyCreated:`Создано {{created}} из {{total}} катушек; часть операций завершилась ошибкой`,spoolCreated:`Катушка создана`,spoolUpdated:`Катушка обновлена`,spoolDeleted:`Катушка удалена`,deepLinkSpoolNotFound:`Катушка не найдена`,deepLinkFetchFailed:`Не удалось загрузить катушку. Повторите попытку.`,spoolArchived:`Катушка архивирована`,spoolRestored:`Катушка восстановлена`,kProfileSaveFailed:`Не удалось сохранить настройки K-профиля`,syncWeightSpoolNotFound:`Катушка не найдена: возможно, она была удалена`,syncWeightSpoolmanUnreachable:`Spoolman недоступен. Повторите попытку позже.`,syncWeightFailed:`Не удалось синхронизировать массу`,spoolmanUnreachable:`Spoolman недоступен. Повторите попытку позже.`,deleteSpoolNotFound:`Катушка не найдена: возможно, она уже удалена`,deleteFailed:`Не удалось удалить катушку`,archiveSpoolNotFound:`Катушка не найдена: возможно, она уже удалена`,archiveFailed:`Не удалось архивировать катушку`,restoreSpoolNotFound:`Катушка не найдена: возможно, она уже удалена`,restoreFailed:`Не удалось восстановить катушку`,saveFailed:`Не удалось сохранить изменения`,tagClearFailed:`Не удалось очистить метку`,deleteConfirm:`Удалить эту катушку без возможности восстановления?`,archiveConfirm:`Архивировать эту катушку?`,advancedSettings:`Расширенные настройки`,filamentInfoTab:`Сведения о филаменте`,paProfileTab:`Профиль PA`,colorAndCostTab:`Цвет и стоимость`,printersTab:`Принтеры`,filamentInfo:`Филамент`,additional:`Дополнительно`,loadingPresets:`Загрузка облачных пресетов…`,cloudConnected:`Облако подключено`,cloudNotConnected:`Облако не подключено; используются значения по умолчанию`,recentColors:`Недавние`,searchColors:`Поиск цветов…`,searchResults:`Результаты поиска`,allColors:`Все цвета`,commonColors:`Основные цвета`,showLess:`Показать меньше`,showAll:`Показать все`,noColorsFound:`Нет цветов, соответствующих запросу`,noResults:`Совпадений не найдено`,extraColorsLabel:`Дополнительные цвета`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Вставьте от 2 до 8 HEX-цветов через запятую. Они будут отображены как градиент.`,extraColorsInvalid:`Пропущены некорректные HEX-значения: {{tokens}}`,colorEffectLabel:`Эффект`,colorEffect:{none:`Нет`,sparkle:`Блёстки`,wood:`Дерево`,marble:`Мрамор`,glow:`Свечение`,matte:`Матовый`,silk:`Шёлк`,galaxy:`Галактика`,rainbow:`Радуга`,metal:`Металл`,translucent:`Полупрозрачный`,gradient:`Градиент`,dualColor:`Двухцветный`,triColor:`Трёхцветный`,multicolor:`Многоцветный`},selectMaterialFirst:`Сначала выберите материал на вкладке «Сведения о филаменте».`,noPrintersConfigured:`Принтеры не настроены. Добавьте принтеры, чтобы использовать профили PA.`,matchingFilter:`Совпадающие`,anyBrand:`Любой бренд`,anyVariant:`Любой вариант`,autoSelect:`Автовыбор`,matches:`совпадений`,match:`совпадение`,noMatches:`Нет совпадений`,connected:`Подключён`,offline:`Не в сети`,printerOffline:`Принтер не в сети. Подключите его для просмотра калибровочных профилей.`,noKProfilesMatch:`Нет K-профилей, соответствующих выбранному филаменту.`,leftNozzle:`Левое сопло`,rightNozzle:`Правое сопло`,profilesSelected:`выбрано калибровочных профилей`,filamentPreset:`Пресет филамента`,presetUseSpoolDefault:`Использовать пресет катушки`,presetInherited:`наследуется`,presetOverride:`переопределён`,presetNeedsModel:`Этот принтер ещё не сообщил свою модель, поэтому у него не может быть собственного пресета.`,autoMatchPresets:`Подобрать автоматически`,autoMatchPresetsHint:`Найти вариант пресета катушки, в названии которого указана каждая модель`,kProfilesPerPrinter:`K-профили`,kProfileNotSet:`Не задан`,kProfileFlowMismatch:`Этот профиль измерен на сопле {{profile}}, но установлено сопло {{fitted}}, поэтому он не будет применён`,nozzle:`Сопло`,unknownModel:`Неизвестная модель`,onePrinter:`1 принтер`,nPrinters:`Принтеров: {{n}}`,filamentPresetsLoadFailed:`Не удалось загрузить пресеты по моделям для этой катушки`,filamentPresetSaveFailed:`Не удалось сохранить пресеты по моделям`,totalInventory:`Всего в учёте`,totalConsumed:`Израсходовано всего`,byMaterial:`По материалам`,inPrinter:`В принтерах`,lowStock:`Малый остаток`,sinceTracking:`С начала учёта`,resetConsumedCounter:`Сбросить счётчик`,resetConsumedCounterTooltip:`Обнулить счётчик израсходованных граммов для этой катушки. Остаток массы не изменится.`,resetConsumedCounterConfirm:`Сбросить счётчик расхода этой катушки до 0? Последующие печати будут учитываться заново. Сама катушка, расчёт остатка и настройки не изменятся.`,resetAllConsumedCounters:`Сбросить все счётчики`,resetAllConsumedCountersTooltip:`Обнулить счётчик израсходованных граммов у всех катушек. Остатки массы не изменятся.`,resetAllConsumedCountersConfirm:`Сбросить счётчик расхода до 0 у всех {{count}} катушек, включая архивные? Показатель «Израсходовано всего» будет очищен, а будущие печати начнут учитываться с нуля. Катушки и их остатки не изменятся.`,consumedCounterReset:`Счётчик сброшен`,allConsumedCountersReset:`Счётчик сброшен у {{count}} катушек`,resetConsumedCounterFailed:`Не удалось сбросить счётчик`,loadedInAms:`Загружено в AMS/внешний слот`,remaining:`Остаток`,weightCheck:`Проверка массы`,lastWeighed:`Последнее взвешивание`,neverWeighed:`Не взвешивалась`,search:`Поиск катушек…`,showing:`Показано`,to:`–`,of:`из`,show:`Показывать`,spools:`катушек`,spool:`катушка`,page:`Страница`,noSpoolsMatch:`Ничего не найдено`,noSpoolsMatchDesc:`Измените поисковый запрос или фильтры.`,active:`Активные`,archived:`Архивные`,all:`Все`,used:`Израсходовано`,new:`Новые`,clearFilters:`Сбросить фильтры`,table:`Таблица`,cards:`Карточки`,net:`Нетто`,groupSimilar:`Группировать`,groupedSpools:`Одинаковых катушек: {{count}}`,groupedRows:`строк`,columns:`Столбцы`,configureColumns:`Настроить столбцы`,configureColumnsDesc:`Перетаскивайте столбцы или используйте стрелки для изменения порядка. Видимость переключается значком глаза.`,visible:`видимых`,reset:`Сбросить`,cancel:`Отмена`,applyChanges:`Применить изменения`,moveUp:`Переместить вверх`,moveDown:`Переместить вниз`,hideColumn:`Скрыть столбец`,showColumn:`Показать столбец`,linkToSpool:`Связать с катушкой`,tagLinked:`Метка связана с катушкой`,tagLinkFailed:`Не удалось связать метку`,tagAlreadyLinked:`Метка уже связана с катушкой #{{id}}`,unknownTag:`Обнаружена неизвестная RFID-метка`,usageHistory:`История расхода`,noUsageHistory:`Расход пока не зарегистрирован`,printName:`Название печати`,weightConsumed:`Израсходованная масса`,clearHistory:`Очистить`,historyCleared:`История расхода очищена`,fillSourceLabel:`(Учёт)`,lowStockThresholdError:`Порог должен быть от 0,1 до 99,9`,assignMismatchTitle:`Несоответствие материала`,assignMismatchMessage:`Материал выбранной катушки «{{spoolMaterial}}» не соответствует материалу слота «{{trayMaterial}}» в {{location}}. Всё равно назначить?`,assignMismatchConfirm:`Всё равно назначить`,assignPartialMismatchMessage:`Материал катушки «{{spoolMaterial}}» похож, но не совпадает точно с «{{trayMaterial}}» в {{location}}. Продолжить?`,assignProfileMismatchMessage:`Профиль катушки «{{spoolProfile}}» не соответствует профилю слота «{{trayProfile}}» в {{location}}. Продолжить?`,assignReconfigureNote:`Слот AMS будет перенастроен на профиль катушки.`,spoolmanFilamentCatalog:`Каталог филаментов Spoolman`,pickFromSpoolmanCatalog:`Выбрать из каталога Spoolman…`,spoolmanFilamentSelected:`Филамент выбран из каталога Spoolman`,spoolmanFilamentUnlinked:`Связь с каталогом филаментов удалена`,noSpoolmanFilaments:`В каталоге Spoolman филаменты не найдены`,spoolmanFilamentColorSwatch:`Цвет филамента`,spoolWeightManagedBySpoolman:`Масса пустой катушки задаётся в Spoolman для каждого типа филамента`,spoolmanCatalogLoadFailed:`Не удалось загрузить каталог филаментов Spoolman`},timelapse:{title:`Таймлапс`,create:`Создать таймлапс`,download:`Скачать`,delete:`Удалить`,preview:`Предпросмотр`,frameRate:`Частота кадров`,quality:`Качество`,processing:`Обработка...`,noTimelapses:`Таймлапсы отсутствуют`},ams:{title:`AMS`,slot:`Слот`,empty:`Пусто`,emptySlot:`Пустой слот`,slotEmpty:`Пусто`,slotUnconfigured:`?`,emptySlotReset:`Филамент не назначен`,unknown:`Неизвестно`,humidity:`Влажность`,temperature:`Температура`,filamentType:`Тип филамента`,filamentColor:`Цвет`,remaining:`Остаток`,history:`История AMS`,noHistory:`История отсутствует`,configureSlot:`Настроить слот`,externalSpool:`Внешняя катушка`,profile:`Профиль`,kFactor:`Коэффициент K`,kFactorShort:`K`,fill:`Заполнить`,configure:`Настроить`,used:`использовано`,remainingUnit:`осталось`},printModal:{variants:{editNote:`Эти варианты заданы при добавлении в очередь. Чтобы изменить их, отмените и добавьте заново.`,title:`Варианты принтера`,help:`Одна задача, одно место в очереди. Первый подходящий освободившийся принтер напечатает свой файл.`,unknownModel:`Неизвестная модель`,plateFor:`Стол для {{filename}}`,moveUp:`Вверх`,moveDown:`Вниз`,queued:`В очереди, вариантов: {{count}}`},selectPrinter:`Выберите принтер`,selectPlate:`Выберите пластину`,filamentMapping:`Сопоставление филаментов`,useArchiveMapping:`Маппинг`,useArchiveMappingTooltip:`Выбрать все ячейки из маппинга AMS, сохранённого с этим архивом (от слайсера), вместо подбора по типу/цвету.`,clickToChangeSlot:`Нажмите, чтобы изменить назначение ячейки`,reRead:`Перечитать`,plateN:`Пластина {{n}}`,plateFilamentsUnreadable:`Не удалось определить филаменты выбранной пластины, поэтому их невозможно сопоставить. Снимите выбор с этой пластины, чтобы добавить остальные в очередь.`,totalCost:`Общая стоимость:`,slotRemainingShort:` — осталось {{grams}} г`,printSettings:`Настройки печати`,bedLeveling:`Калибровка стола`,flowCalibration:`Калибровка потока`,vibrationCalibration:`Калибровка вибраций`,layerInspection:`Проверка первого слоя`,timelapse:`Таймлапс`,cancel:`Отмена`,noPrintersAvailable:`Нет доступных принтеров`,printerBusy:`Принтер занят`,printerOffline:`Принтер не в сети`,sameTypeDifferentColor:`Тот же тип, другой цвет`,filamentTypeNotLoaded:`Филамент этого типа не загружен`,statusReady:`Готово`,statusColorMismatch:`Цвет не совпадает`,statusTypeNotFound:`Тип не найден`,requiredTooltip:`Требуется: {{name}} - {{color}}`,manuallySelected:`Выбрано вручную`,autoMatched:`Подобрано автоматически`,selectSlot:`Выбрать слот`,exactColorMatch:`Точное совпадение цвета`,slotForFilament:`Слот принтера для {{name}}`,overrideForFilament:`Переопределение филамента для {{name}}`,sameTypeDifferentColorDetail:`Тот же тип, другой цвет: нужен {{required}}, в слоте {{loaded}}`,requiredTypeNotInPrinter:`Требуемый тип филамента не найден в принтере.`,whenToPrint:`Когда печатать`,asap:`Как можно скорее`,queue:`В очередь`,schedule:`По расписанию`,dateTime:`Дата и время`,invalidDateTime:`Введите корректные дату и время`,openCalendar:`Открыть календарь`,requireManualStart:`Требовать ручного запуска`,requirePreviousSuccess:`Запускать только после успешной предыдущей печати`,autoOffAfter:`Выключить принтер после завершения`,helpAsap:`Задание будет добавлено в начало очереди и запустится, как только подходящий принтер освободится.`,helpSchedule:`Задание запустится в указанное время, если принтер свободен. Если принтер занят, оно будет ждать освобождения.`,helpQueue:`Задание будет добавлено в конец очереди.`,leftNozzle:`Л`,rightNozzle:`П`,leftNozzleTooltip:`Левое сопло`,rightNozzleTooltip:`Правое сопло`,ftsSameInletHint:`Все филаменты для этой печати подключены к переключателю тракта филамента IN-{{inlet}}. Смена между филаментами на одном входе идёт медленнее — переставьте один в AMS на другом входе.`,rackPosition:`Позиция в стойке`,rackPositionTooltip:`Каким соплом из стойки печатать этот филамент. Позиции нумеруются так же, как на принтере.`,rackEmptyPosition:`Эта позиция в стойке пуста`,rackWrongNozzle:`Установлено сопло {{has}}; этому филаменту нужно {{needs}}`,filamentOverride:`Переопределение филаментов`,filamentOverrideHint:`При необходимости замените филаменты для назначения по модели. Планировщик будет сопоставлять выбранные филаменты вместо исходных значений из 3MF.`,originalFilament:`Исходный`,overrideWith:`Заменить на`,resetToOriginal:`Вернуть исходный`,insufficientFilamentTitle:`Недостаточно филамента`,waitingForAmsStatus:`Ожидание состояния AMS от принтера {{printer}}…`,insufficientFilamentMessage:`На некоторых назначенных катушках осталось меньше филамента, чем требуется для этой печати:`,insufficientFilamentLine:`{{printer}} — {{slot}}: требуется {{required}} г, осталось {{remaining}} г`,insufficientFilamentLinePooled:`{{printer}} — {{slot}}: требуется {{required}} г, доступно {{remaining}} г на подходящих катушках (резервный филамент AMS)`,printAnyway:`Всё равно печатать`,forceColorMatch:`Обязательно учитывать цвет`,staggerPrinterStarts:`Запускать принтеры с задержкой`,staggerGroupSize:`Размер группы`,staggerInterval:`Интервал (мин)`,staggerPreview:`{{printers}} принтеров → {{groups}} групп по {{size}}, запуск каждые {{interval}} мин`,staggerLastGroup:`последняя группа: {{count}}`,staggerTotal:`всего: {{minutes}} мин`,staggerToPrinters:`Распределить запуск для {{count}} принтеров`,gcodeInjection:`Добавить G-code автозапуска`,insufficientBudget:`Недостаточно бюджета`,unlimitedNoBudget:`Без ограничений — лимит бюджета не задан.`,noPrintableCostCenters:`Нет активного центра затрат, доступного для печати. Попросите администратора предоставить вам доступ к печати.`},backup:{includesEncryptionKey:`Локальные резервные копии включают файл ключа шифрования MFA (DATA_DIR/.mfa_encryption_key), поэтому ZIP-архив является самодостаточным. Считайте этот ZIP конфиденциальным: любой, у кого есть файл, сможет расшифровать сохранённые в нём секреты клиента OIDC и TOTP.`,title:`Резервное копирование и восстановление`,createBackup:`Создать резервную копию`,restoreBackup:`Восстановить из копии`,restoreDescription:`Заменить все данные данными из резервной копии`,downloadBackup:`Скачать резервную копию`,uploadBackup:`Загрузить резервную копию`,lastBackup:`Последняя копия`,autoBackup:`Автоматическое резервное копирование`,backupNow:`Создать копию сейчас`,restoreWarning:`Внимание: восстановление из резервной копии перезапишет все текущие данные.`,includeArchives:`Включить архивы`,includeSettings:`Включить настройки`,includeProfiles:`Включить профили`,backupSuccess:`Резервная копия успешно создана`,restoreSuccess:`Резервная копия успешно восстановлена`,backupFailed:`Не удалось создать резервную копию`,restoreFailed:`Не удалось выполнить восстановление`,restoreNote:`На время восстановления виртуальный принтер будет остановлен`,githubBackup:`Резервная копия в Git`,enabled:`Включено`,cloudLoginRequired:`Требуется вход в Bambu Cloud. Войдите в разделе «Профили → Облачные профили», чтобы включить резервное копирование в GitHub.`,cloudLoginRequiredShort:`Требуется вход в облако`,githubDescription:`Автоматически синхронизировать профили с приватным репозиторием GitHub для резервного копирования и хранения истории версий.`,repoIsPrivate:`Репозиторий приватный — резервное копирование безопасно.`,repoIsPublicWarning:`Репозиторий ПУБЛИЧНЫЙ. Резервные копии Bambuddy содержат учётные данные MQTT, токены Home Assistant и Prometheus, адрес электронной почты Bambu Cloud и коды доступа к принтерам из K-профилей. Сохранение заблокировано, пока репозиторий не будет сделан приватным в настройках провайдера.`,repoVisibilityUnknown:`Не удалось определить видимость репозитория. Bambuddy отказывается создавать резервные копии в репозитории, приватность которого не подтверждена; сохранение будет заблокировано.`,repositoryUrl:`URL репозитория`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Разрешить небезопасный HTTP`,allowInsecureHttpHint:`Включайте для локальных серверов в частной сети без TLS`,personalAccessToken:`Персональный токен доступа`,tokenSaved:`(сохранён)`,enterNewToken:`Введите новый токен для обновления`,tokenHintGitHub:`Токен с точечными правами на чтение и запись Contents либо классический токен с областью repo.`,tokenHintGitLab:`Токен с областью api либо read_repository вместе с write_repository.`,tokenHintGitea:`Токен с областью write:repository.`,tokenHintForgejo:`Токен с областью write:repository. Достаточно токена, ограниченного только этим репозиторием.`,branch:`Ветка`,provider:`Git-провайдер`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Только вручную`,hourly:`Ежечасно`,daily:`Ежедневно`,weekly:`Еженедельно`,includeInBackup:`Включить в резервную копию`,kProfiles:`K-профили`,kProfilesDescription:`Калибровки Pressure Advance с подключённых принтеров`,noPrintersConnected:`Нет подключённых принтеров`,printersConnected:`Подключено {{connected}} из {{total}}`,cloudProfiles:`Облачные профили`,cloudProfilesDescription:`Предустановки филамента, принтера и процесса из Bambu Cloud и Orca Cloud`,cloudProfilesAccounts:`Подключённые аккаунты — Bambu Cloud: {{bambu}}, Orca Cloud: {{orca}}`,appSettings:`Настройки приложения`,appSettingsDescription:`Конфигурация Bambuddy (полная база данных)`,spoolInventory:`Учёт катушек`,spoolInventoryDescription:`Катушки филамента, история расхода и учёт стоимости`,printArchives:`Архив печати`,printArchivesDescription:`Метаданные истории печати без файлов G-code и 3MF`,lastBackupAt:`Последняя копия:`,noBackupsYet:`Резервных копий пока нет`,next:`Следующая:`,startingBackup:`Запуск резервного копирования...`,test:`Проверить`,enableBackup:`Включить резервное копирование`,testConnection:`Проверить соединение`,enterRepoUrl:`Введите URL репозитория`,enterRepoAndToken:`Введите URL репозитория и токен доступа`,repoRequired:`Необходимо указать URL репозитория`,tokenRequired:`Необходимо указать токен доступа`,githubBackupEnabled:`Резервное копирование в GitHub включено`,tokenUpdated:`Токен обновлён`,settingsSaved:`Настройки сохранены`,failedToSave:`Не удалось сохранить: {{message}}`,backupCompleteFiles:`Резервное копирование завершено — обновлено файлов: {{count}}`,backupSkippedNoChanges:`Резервное копирование пропущено — изменений нет`,backupFailed2:`Ошибка резервного копирования: {{message}}`,clearedLogs:`Очищено записей журнала: {{count}}`,failedToClearLogs:`Не удалось очистить журнал: {{message}}`,restoreFromGit:{button:`Восстановить из Git`,title:`Восстановление из резервной копии Git`,subtitle:`Выберите коммит и данные для восстановления`,commitLabel:`Коммит резервной копии`,latestCommit:`Последняя резервная копия (вершина ветки)`,categoriesLabel:`Что восстановить`,inspecting:`Чтение содержимого резервной копии...`,itemCount:`{{count}} в резервной копии`,overwriteLabel:`Перезаписывать существующие записи`,overwriteOn:`Существующие записи будут обновлены из резервной копии.`,overwriteOff:`Добавляются только отсутствующие записи, существующие не изменяются.`,selectedCount:`Выбрано: {{count}}`,restoring:`Восстановление...`,confirmTitle:`Восстановить из резервной копии?`,confirmMessage:`Выбранные категории будут восстановлены из этого коммита. Отсутствующие записи будут добавлены, существующие останутся без изменений.`,confirmMessageOverwrite:`Выбранные категории будут восстановлены из этого коммита с перезаписью уже существующих локальных записей. Отменить это действие нельзя.`,kprofilesOverwriteCaveat:`K-профили — исключение: запись в слот всегда заменяет калибровку на принтере.`,tally:`восстановлено: {{restored}}, пропущено: {{skipped}}, с ошибкой: {{failed}}`,reloadHint:`Перезагрузите Bambuddy, чтобы восстановленные данные отобразились везде.`,partialHint:`Перечисленные выше категории завершены и сохранены. Отсутствующие категории не выполнялись.`,failed:`Не удалось выполнить восстановление.`,loadFailed:`Не удалось прочитать репозиторий резервных копий.`,details:{notPresent:`Отсутствует в этом коммите резервной копии`,unreadableJson:`Нечитаемый JSON: {{paths}}`,settingsNoPayload:`В данных нет настроек`,settingsCredentialsWillSkip:`Ключей, похожих на учётные данные, будет пропущено: {{count}}`,settingsCompanionWillSkip:`Ключей, похожих на учётные данные, будет пропущено: {{count}}, а зависящие от них переключатели ({{companion}}) останутся выключенными`,settingsCompanionOnlyWillSkip:`Переключатели ({{companion}}) останутся выключенными - учётные данные, нужные каждому из них, нельзя восстановить из резервной копии`,spoolsUsageCount:`включая записей расхода: {{count}}`,archivesMetadataOnly:`Только метаданные - файлы 3MF и миниатюры не входят в резервную копию Git`,kprofilesPrinterCount:`по {{count}} принтерам`},notes:{noData:`В этой резервной копии нет данных такого типа`,archivesPrinterMissing:`Некоторые архивы ссылались на несуществующие принтеры - связь очищена`,archivesProjectMissing:`Некоторые архивы ссылались на несуществующие проекты - связь очищена`,archivesOwnerCleared:`Некоторые архивы ссылались на несуществующих пользователей - владелец очищен, поэтому они видны только пользователям с правом archives:read_all, пока администратор не назначит владельца заново`,archivesOwnerUnmatched:`Некоторые архивы указывают владельца, которого нет в этом экземпляре - владелец очищен, а не угадан по идентификатору пользователя из резервной копии, поэтому они видны только пользователям с правом archives:read_all, пока администратор не назначит владельца заново`,archivesOwnerUnknown:`Некоторые архивы восстановлены без владельца - в этой резервной копии он не записан, поэтому они видны только пользователям с правом archives:read_all, пока администратор не назначит владельца`,archivesUndeleted:`Архивы, удалённые после резервного копирования, снова видны - перезапись была включена`,archivesMetadataOnly:`Восстановленные архивы содержат только метаданные - файлы 3MF и миниатюры не входят в резервную копию Git`,spoolUsageUnresolved:`Записей расхода пропущено: {{count}} - их катушки нет в списке катушек этой резервной копии, поэтому привязать их не к чему.`,spoolUsageUnlinked:`Записей расхода восстановлено без связи с историей печати: {{count}} - выберите «Архивы печати» вместе с «Инвентарём катушек», чтобы сохранить связь.`,spoolTagKept:`Меток катушек оставлено без изменений: {{count}} - резервная копия стёрла бы метку, отсканированную позже, или перенесла бы её на другую катушку.`,settingsCredentialsSkipped:`Ключей, похожих на учётные данные, пропущено: {{count}} - введите секреты вручную`,settingsAuthSkipped:`Настроек аутентификации пропущено: {{count}} - меняйте их в разделе «Настройки > Аутентификация», чтобы продолжали работать проверки блокировки`,settingsCompanionSkipped:`{{keys}} оставлены выключенными - нужные им учётные данные нельзя восстановить из резервной копии, и в этом экземпляре они не сохранены, поэтому включение оставило бы интеграцию без аутентификации`,settingsMqttRelayFailed:`Настройки MQTT восстановлены, но переподключить реле не удалось - перезапустите Bambuddy`,kprofilesAlwaysOverwrite:`K-профили всегда перезаписывают соответствующий слот на принтере`,kprofilesAckUnreliable:`Принтер, который не отвечает, всё равно считается восстановленным - проверьте профили на принтере`,kprofilesPrinterMissing:`Нет принтера с серийным номером {{serial}} - пропущено`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) не подключён - пропущено`,kprofilesUnknownNozzle:`Неожиданный диаметр сопла {{nozzle}} для {{serial}} - отправлено как есть`,kprofilesUnmatched:`Профилей для {{nozzle}} без соответствия на {{printer}}: {{count}} - добавлены как новые профили`,kprofilesSendFailed:`Не удалось отправить профили {{nozzle}} на {{printer}} ({{serial}})`,kprofilesRefused:`{{printer}} ({{serial}}) отклонил профили {{nozzle}}: {{reason}}`,kprofilesStepFailed:`Не удалось завершить этап K-профилей - {{reason}}. Всё, что было восстановлено до него, сохранено.`}},history:`История`,clear:`Очистить`,date:`Дата`,status:`Статус`,trigger:`Тип`,triggers:{manual:`Резервная копия (вручную)`,scheduled:`Резервная копия (по расписанию)`,restore:`Восстановление`},commit:`Коммит`,localBackup:`Локальная резервная копия`,localBackupDescription:`Создать полную резервную копию данных Bambuddy, включая базу данных, архивы, загрузки и все файлы.`,downloadBackupLabel:`Скачать резервную копию`,completeBackupZip:`Полная копия: база данных и все файлы (ZIP)`,download:`Скачать`,preparingBackup:`Подготовка резервной копии...`,creatingArchive:`Создание архива резервной копии... Для больших архивов это может занять некоторое время.`,downloadingFile:`Скачивание файла резервной копии...`,backupDownloaded:`Резервная копия успешно скачана`,failedToCreateBackup:`Не удалось создать резервную копию: {{message}}`,restore:`Восстановить`,restoreReplacesAll:`Восстановление заменит все данные.`,restoreReplacesAllDetail:`Текущая база данных и файлы будут полностью заменены. После восстановления потребуется перезапуск.`,restoreConfirmTitle:`Восстановление из резервной копии`,restoreConfirmMessage:`Восстановить данные из файла «{{filename}}»? Текущая база данных и все файлы будут полностью заменены. После восстановления приложение потребуется перезапустить.`,restoreConfirmButton:`Восстановить`,uploadingFile:`Загрузка файла резервной копии...`,backupRestoredRestart:`Резервная копия восстановлена. Перезапустите Bambuddy.`,failedToRestore:`Не удалось восстановить резервную копию. Проверьте формат файла.`,reloadNow:`Перезагрузить сейчас`,creatingBackup:`Создание резервной копии`,restoringBackup:`Восстановление данных`,preparing:`Подготовка...`,processing:`Обработка...`,doNotClosePage:`Не закрывайте эту страницу и не переходите на другую. Для больших резервных копий операция может занять несколько минут.`,restoring:`Восстановление...`,restoreComplete:`Восстановление завершено`,restoreFailed2:`Ошибка восстановления`,importSettings:`Импортировать настройки из файла резервной копии`,pleaseWaitRestoring:`Подождите, пока данные восстанавливаются`,selectBackupFile:`Нажмите, чтобы выбрать файл резервной копии (.json или .zip)`,duplicateHandling:`Правила обработки дубликатов:`,matchPrinters:`Принтеры`,matchPrintersBy:`сопоставляются по серийному номеру`,matchSmartPlugs:`Умные розетки`,matchSmartPlugsBy:`сопоставляются по IP-адресу`,matchNotificationProviders:`Провайдеры уведомлений`,matchNotificationProvidersBy:`сопоставляются по имени`,matchFilaments:`Филаменты`,matchFilamentsBy:`сопоставляются по имени, типу и бренду`,matchArchives:`Архивы`,matchArchivesBy:`сопоставляются по хешу содержимого и всегда пропускаются`,matchPendingUploads:`Ожидающие загрузки`,matchPendingUploadsBy:`сопоставляются по имени файла`,matchSettingsTemplates:`Настройки и шаблоны`,matchSettingsTemplatesBy:`всегда перезаписываются`,replaceExisting:`Заменять существующие данные`,keepExisting:`Сохранять существующие данные`,overwriteDescription:`Перезаписывать существующие элементы данными из резервной копии`,keepDescription:`Восстанавливать только отсутствующие элементы`,overwriteCaution:`Внимание:`,overwriteWarning:`Перезапись заменит текущие настройки данными из резервной копии. В целях безопасности коды доступа к принтерам никогда не перезаписываются.`,cancel:`Отмена`,processingBackup:`Обработка файла резервной копии...`,itemsRestored:`Восстановлено элементов`,itemsSkipped:`Пропущено элементов`,restored:`Восстановлено`,skippedAlreadyExist:`Пропущено — уже существует`,filesCategory:`Файлы (3MF, миниатюры и т. п.)`,andMore:`...и ещё {{count}}`,newApiKeysGenerated:`Созданы новые API-ключи`,keysShownOnce:`Эти ключи показываются только один раз. Скопируйте их сейчас!`,copy:`Копировать`,noDataFound:`В резервной копии не найдено данных для восстановления.`,close:`Закрыть`,scheduledBackup:`Резервные копии по расписанию`,scheduledBackupDescription:`Автоматически создавать снимки резервных копий по расписанию. Каталог назначения можно смонтировать с NAS или внешнего накопителя.`,frequency:`Периодичность`,backupTime:`Время`,retention:`Хранение`,retentionDescription:`Количество сохраняемых резервных копий`,outputPath:`Каталог назначения`,outputPathPlaceholder:`По умолчанию: {{path}}`,outputPathDescription:`Оставьте пустым, чтобы использовать стандартный каталог`,runNow:`Запустить сейчас`,backupFiles:`Файлы резервных копий`,noScheduledBackups:`Резервных копий пока нет`,deleteBackup:`Удалить`,deleteBackupConfirm:`Удалить этот файл резервной копии?`,backupRunning:`Выполняется резервное копирование...`,scheduledBackupComplete:`Резервная копия успешно создана`,scheduledBackupFailed:`Ошибка резервного копирования`,nextBackup:`Следующая копия`,backupSize:`Размер`,localTimeHint:`Местное время ({{tz}})`,defaultPathLabel:`По умолчанию:`,pathCheck:{title:`Bambuddy не может записывать в этот каталог`,howToFix:`Как исправить:`,sandboxed:`Служба Bambuddy не может записывать в {{path}}. Её модуль systemd работает с ProtectSystem=strict, поэтому все каталоги за пределами каталогов установки, данных и журналов доступны службе только для чтения, даже если из вашей командной оболочки запись разрешена.`,read_only:`{{path}} находится в файловой системе, доступной только для чтения.`,permission_denied:`Bambuddy не разрешена запись в {{path}}. Проверьте владельца каталога и права доступа.`,no_space:`В файловой системе, содержащей {{path}}, закончилось свободное место.`,not_a_directory:`{{path}} существует, но не является каталогом.`,missing:`{{path}} не существует, и создать этот каталог не удалось.`,error:`Bambuddy не может записывать в {{path}}.`,ephemeralTitle:`Эти резервные копии не сохранятся после перезапуска контейнера`,container_ephemeral:`{{path}} находится внутри контейнера Bambuddy, а не на хосте. Записанные туда резервные копии будут потеряны при пересоздании контейнера. Подключите каталог с хоста:`},categories:{settings:`Настройки`,notification_providers:`Провайдеры уведомлений`,notification_templates:`Шаблоны уведомлений`,smart_plugs:`Умные розетки`,printers:`Принтеры`,filaments:`Филаменты`,maintenance_types:`Виды обслуживания`,archives:`Архивы`,projects:`Проекты`,pending_uploads:`Ожидающие загрузки`,external_links:`Внешние ссылки`,api_keys:`API-ключи`}},tags:{title:`Метки`,addTag:`Добавить метку`,editTag:`Изменить метку`,deleteTag:`Удалить метку`,tagName:`Название метки`,tagColor:`Цвет метки`,noTags:`Меток нет`,deleteConfirm:`Удалить эту метку?`,manageTags:`Управление метками`},uploadModal:{title:`Загрузка файлов 3MF`,dragDrop:`Перетащите файлы .3mf сюда`,or:`или`,browseFiles:`Выбрать файлы`,extractionInfo:`Модель принтера будет автоматически определена по метаданным файла 3MF.`,uploaded:`загружено`,failed:`ошибок`,uploading:`Загрузка...`,upload:`Загрузить`,uploadFailed:`Не удалось загрузить`},editArchive:{title:`Редактирование архива`,name:`Название`,namePlaceholder:`Название печати`,printer:`Принтер`,noPrinter:`Без принтера`,project:`Проект`,noProject:`Без проекта`,itemsPrinted:`Напечатано изделий`,itemsPrintedHelp:`Количество изделий, полученных в этом задании печати. Укажите 0, если испорчена вся пластина.`,filamentUsed:`Израсходованный филамент (г)`,filamentUsedPlaceholder:`напр. 46.16`,filamentUsedHelp:`Укажите вручную, если печать заархивирована без 3MF — тогда она попадёт в итоги по филаменту. При повторном сканировании архива с 3MF значение снова считывается из файла.`,notes:`Заметки`,notesPlaceholder:`Добавьте заметки об этой печати...`,externalLink:`Внешняя ссылка`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Ссылка на Printables, Thingiverse или другой источник`,tags:`Метки`,tagsPlaceholder:`Добавить метки...`,addMoreTags:`Добавить ещё метки...`,matchingTags:`Совпадения для «{{query}}»`,existingTags:`Существующие метки`,clickToAdd:`(нажмите, чтобы добавить)`,status:`Статус`,failureReason:`Причина сбоя`,selectReason:`Выберите причину...`,photos:`Фотографии результата печати`,photosHelp:`Нажмите +, чтобы добавить фотографии результата`,printResult:`Результат печати`,saving:`Сохранение...`,failureReasons:{adhesionFailure:`Плохая адгезия к столу`,spaghettiDetached:`Спагетти / отрыв детали`,layerShift:`Сдвиг слоёв`,cloggedNozzle:`Засор сопла`,filamentRunout:`Закончился филамент`,warping:`Коробление`,stringing:`Стрингинг`,underExtrusion:`Недоэкструзия`,powerFailure:`Сбой питания`,userCancelled:`Отменено пользователем`,noStatusUpdate:`Обновление статуса не получено`,other:`Другое`},statuses:{completed:`Завершено`,failed:`Ошибка`,aborted:`Отменено`,printing:`Печать`}},kProfiles:{title:`K-профили`,noPrintersConfigured:`Принтеры не настроены`,addPrinterInSettings:`Добавьте принтер в настройках, чтобы управлять K-профилями`,noActivePrinters:`Нет активных принтеров`,enablePrinterConnection:`Включите подключение к принтеру, чтобы просматривать его K-профили`,loadingProfiles:`Загрузка K-профилей...`,printerOffline:`Принтер не в сети`,printerOfflineDesc:`Выбранный принтер не подключён. Включите его, чтобы просмотреть K-профили.`,noMatchingProfiles:`Подходящие профили не найдены`,noMatchingProfilesDesc:`Ни один профиль не соответствует условиям поиска`,noKProfiles:`K-профили отсутствуют`,noKProfilesDesc:`Для сопла {{diameter}} мм не найдены профили Pressure Advance`,createFirstProfile:`Создать первый профиль`,printer:`Принтер`,nozzle:`Сопло`,refresh:`Обновить`,addProfile:`Добавить профиль`,export:`Экспорт`,import:`Импорт`,select:`Выбрать`,selectAll:`Выбрать все`,delete:`Удалить`,searchPlaceholder:`Поиск по названию или филаменту...`,allExtruders:`Все экструдеры`,leftOnly:`Только левый`,rightOnly:`Только правый`,allFlow:`Любой тип потока`,hfOnly:`Только HF`,sOnly:`Только S`,sortName:`Сортировка: название`,sortKValue:`Сортировка: K-значение`,sortFilament:`Сортировка: филамент`,leftExtruder:`Левый экструдер`,rightExtruder:`Правый экструдер`,modal:{addTitle:`Добавить K-профиль`,editTitle:`Изменить K-профиль`,profileName:`Название профиля`,profileNamePlaceholder:`Мой профиль PLA`,kValue:`K-значение`,kValuePlaceholder:`0.020`,kValueHelp:`Типичный диапазон: 0,01–0,06 для PLA, 0,02–0,10 для PETG`,filament:`Филамент`,selectFilament:`Выберите филамент...`,source:{local:`Импортированные`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Встроенный`},noFilamentsHelp:`Нет доступных филаментов. Войдите в Bambu Cloud или импортируйте пресеты в разделе Профили → Локальные профили.`,searchFilaments:`Поиск филаментов...`,noFilamentMatches:`Нет филаментов, соответствующих запросу`,flowType:`Тип потока`,highFlow:`Высокопоточный`,standard:`Стандартный`,nozzleSize:`Диаметр сопла`,extruder:`Экструдер`,extruders:`Экструдеры`,left:`Левый`,right:`Правый`,notes:`Заметки (хранятся локально)`,notesPlaceholder:`Добавьте заметки об этом профиле...`,notesHelp:`Заметки сохраняются в Bambuddy, а не на принтере`,syncing:`Синхронизация с принтером...`,savingExtruder:`Сохранение в экструдер {{current}}/{{total}}...`,pleaseWait:`Подождите`},deleteConfirm:{title:`Удалить профиль`,cannotUndo:`Это действие нельзя отменить`,message:`Удалить профиль «{{name}}» с принтера?`},bulkDelete:{title:`Удалить профили`,cannotUndo:`Это действие нельзя отменить`,message:`Удалить с принтера выбранные профили ({{count}})?`},toast:{profileSaved:`K-профиль сохранён`,profilesSaved:`K-профиль сохранён для {{count}} экструдеров`,selectAtLeastOneExtruder:`Выберите хотя бы один экструдер`,selectFilament:`Сначала выберите филамент`,filamentNotResolvable:`Нет идентификатора филамента Bambu для {{name}} — принтер не сможет сохранить профиль`,profileDeleted:`K-профиль удалён`,profilesDeleted:`Удалено профилей: {{count}}`,exportedProfiles:`Экспортировано профилей: {{count}}`,importedProfiles:`Импортировано {{count}} из {{total}} профилей`,noProfilesToExport:`Нет профилей для экспорта`,invalidFileFormat:`Недопустимый формат файла`,failedToParseImport:`Не удалось разобрать файл импорта`,failedToSaveBatch:`Не удалось сохранить K-профили`,noteSaved:`Заметка сохранена`,failedToSaveNote:`Не удалось сохранить заметку`},permission:{noRead:`У вас нет прав на обновление профилей`,noCreate:`У вас нет прав на добавление профилей`,noUpdate:`У вас нет прав на изменение K-профилей`,noDelete:`У вас нет прав на удаление K-профилей`,noExport:`У вас нет прав на экспорт профилей`,noImport:`У вас нет прав на импорт профилей`}},virtualPrinter:{title:`Виртуальный принтер`,running:`Запущен`,stopped:`Остановлен`,description:{default:`Включает виртуальный принтер, который отображается в Bambu Studio и OrcaSlicer. Отправленные на него файлы сразу сохраняются в архив без печати.`,proxy:`Включает прокси, перенаправляющий трафик слайсера на реальный принтер и позволяющий печатать удалённо из любой сети.`},enable:{title:`Включить виртуальный принтер`,visibleInSlicer:`Отображается как «Bambuddy» при обнаружении принтеров в слайсере`,proxyingTo:`Проксирование на {{name}}`,notActive:`Не активен`},model:{title:`Модель принтера`,description:`Выберите модель принтера, которую нужно эмулировать.`,restartWarning:`При изменении модели виртуальный принтер будет перезапущен`},accessCode:{title:`Код доступа`,isSet:`Код доступа задан`,notSet:`Код доступа не задан — он необходим для включения`,placeholder:`Введите 8-значный код`,placeholderChange:`Введите новый код`,hint:`Код должен состоять ровно из 8 символов. Слайсеры используют его для аутентификации.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Унаследован от целевого принтера`,derivedFromTargetHint:`Используется код доступа целевого принтера. Мост перенаправляет аутентификацию слайсера на реальный принтер, поэтому коды должны совпадать. Чтобы изменить значение, измените код доступа самого принтера.`,reveal:`Показать код доступа`,hide:`Скрыть код доступа`},targetPrinter:{title:`Целевой принтер`,configured:`Целевой принтер для прокси настроен`,notConfigured:`Целевой принтер не выбран — он необходим для режима прокси`,placeholder:`Выберите принтер...`,hint:`Выберите принтер, на который будет перенаправляться трафик слайсера. Принтер должен работать в режиме LAN.`,noPrinters:`Нет настроенных принтеров. Сначала добавьте принтер.`},remoteInterface:{title:`Переопределение сетевого интерфейса`,configured:`Переопределение интерфейса активно`,optional:`Необязательно — используйте, если IP определён неверно, например при нескольких сетевых картах, Docker или VPN`,placeholder:`Определять автоматически...`,hint:`Переопределяет IP-адрес, публикуемый через SSDP и используемый в TLS-сертификате. Полезно, если у Bambuddy несколько сетевых интерфейсов.`},mode:{title:`Режим`,archive:`Архив`,archiveDesc:`Сразу сохранять файлы в архив`,review:`Проверка`,reviewDesc:`Проверять перед добавлением в архив`,queue:`Очередь`,queueDesc:`Сохранять в архив и добавлять в очередь`,proxy:`Прокси`,proxyDesc:`Перенаправлять на реальный принтер`},autoDispatch:{title:`Автоматический запуск`,description:`Автоматически запускать задания после добавления в очередь. Если выключено, задания ожидают ручного запуска.`},queueForceColorMatch:{title:`Требовать совпадения цвета`,description:`Не назначать задание принтеру, если загружены филамент другого типа или другого цвета. По умолчанию выключено: без этой проверки очередь сопоставляет только модель принтера и может выбрать принтер с неподходящим цветом.`},saveAmsMapping:{title:`Сохранять маппинг AMS`,description:`Сохранять выбор AMS-ячейки, который сделал слайсер (из MQTT-команды project_file), в архив — тогда повторная печать использует ту же физическую катушку вместо повторного подбора по типу/цвету файла. По умолчанию выключено.`},gcodeInjection:{title:`Вставка G-code`,description:`Применять к заданиям этого виртуального принтера фрагменты G-code для соответствующей модели, заданные в настройках. По умолчанию выключено.`},tailscaleDisabled:{title:`Интеграция Tailscale`,description:`Отметить этот виртуальный принтер как доступный через Tailscale. Будет показан Tailscale-адрес хоста, который нужно указать в слайсере. Импорт сертификата центра сертификации выполняется как обычно; этот переключатель на сертификаты не влияет.`},setupRequired:{title:`Требуется настройка`,description:`Для работы виртуального принтера требуется дополнительная настройка системы: перенаправление портов, правила межсетевого экрана и параметры, зависящие от платформы.`,readGuide:`Перед включением прочитайте руководство по настройке`},archiveNameSource:{title:`Источник названия архива`,description:`Выберите способ формирования названия новых архивов для файлов, полученных через виртуальный принтер. «Метаданные» использует поле Title, встроенное слайсером в 3MF. «Имя файла» использует имя, переданное Bambu Studio по FTP. Bambu Studio заменяет введённое в окне отправки название значением Title из 3MF, если оно присутствует, поэтому оба режима часто дают одинаковый результат.`,metadata:`Метаданные`,filename:`Имя файла`},caCert:{title:`Сертификат для слайсера`,description:`Виртуальные принтеры используют TLS-сертификат, подписанный центром сертификации Bambuddy. Один раз импортируйте этот сертификат CA в хранилище доверенных сертификатов слайсера, чтобы он принимал соединение.`,copy:`Копировать`,copied:`Скопировано`,download:`Скачать`,fingerprint:`SHA-256`},howItWorks:{title:`Как это работает`,step1:`В одной локальной сети виртуальные принтеры автоматически появляются в Bambu Studio и OrcaSlicer. Из других сетей добавьте их вручную по IP-адресу и коду доступа.`,step2:`В режимах «Архив», «Проверка» и «Очередь» используйте кнопку «Отправить» в слайсере для загрузки 3MF в Bambuddy. Слайсер покажет сообщение об успешной печати, но файл будет только сохранён, без запуска печати.`,step3:`В режиме прокси виртуальный принтер перенаправляет весь трафик на реальный принтер — печать запускается сразу, как при прямом подключении.`},status:{title:`Сведения о состоянии`,printerName:`Имя принтера`,model:`Модель`,serialNumber:`Серийный номер`,mode:`Режим`,pendingFiles:`Ожидающие файлы`,targetPrinter:`Целевой принтер`,ftpPort:`Порт FTP`,mqttPort:`Порт MQTT`,ftpConnections:`Соединения FTP`,mqttConnections:`Соединения MQTT`},toast:{updated:`Настройки виртуального принтера обновлены`,failedToUpdate:`Не удалось обновить настройки`,copyFailed:`Не удалось скопировать — выделите текст вручную`,accessCodeRequired:`Сначала задайте код доступа`,targetPrinterRequired:`Сначала выберите целевой принтер`,bindIpRequired:`Сначала задайте IP-адрес привязки`,accessCodeEmpty:`Код доступа не может быть пустым`,accessCodeLength:`Код доступа должен состоять ровно из 8 символов`,targetCodeChangedRebind:`Код доступа приведён в соответствие с новым целевым принтером. Удалите и снова добавьте устройство в слайсере, чтобы он получил новый код.`,created:`Виртуальный принтер создан`,failedToCreate:`Не удалось создать виртуальный принтер`,deleted:`Виртуальный принтер удалён`,failedToDelete:`Не удалось удалить виртуальный принтер`},list:{title:`Виртуальные принтеры`,add:`Добавить`,addFirst:`Добавить виртуальный принтер`,empty:`Виртуальные принтеры не настроены. Добавьте первый принтер.`},bindIp:{title:`Интерфейс привязки`,placeholder:`Выберите интерфейс...`,hint:`Сетевой интерфейс, к которому будет привязан этот виртуальный принтер. Для каждого принтера он должен быть уникальным.`},proxy:{accessCodeHint:`В режиме прокси используйте в слайсере код доступа целевого принтера. Соединение прозрачно перенаправляется на реальный принтер.`},addDialog:{title:`Добавление виртуального принтера`,name:`Название`,hint:`После создания можно настроить код доступа, целевой принтер и остальные параметры.`,create:`Создать`},deleteConfirm:{title:`Удаление виртуального принтера`,message:`Удалить «{{name}}»? Все службы этого виртуального принтера будут остановлены.`}},modelViewer:{openInSlicer:`Открыть в слайсере`,openInSlicerWith:`Открыть в {{slicer}}`,moreSlicerOptions:`Другие варианты слайсера`,openInSlicerFailed:`Не удалось открыть в слайсере`,tabs:{model:`3D-модель`},notAvailable:`недоступно`,plates:`Пластины`,allPlates:`Все пластины`,plateNumber:`Пластина {{number}}`,plateCount:`{{count}} пластина`,plateCount_other:`{{count}} пластин`,objectCount:`{{count}} объект`,objectCount_other:`{{count}} объектов`,filamentCount:`{{count}} филамент`,filamentCount_other:`{{count}} филаментов`,eta:`Осталось {{minutes}} мин`,noPreview:`Для этого файла нет предпросмотра`,pagination:{pageOf:`Страница {{current}} из {{total}}`,prev:`Назад`,next:`Далее`},errors:{failedToLoad:`Не удалось загрузить файл`,noMeshes:`В файле 3MF не найдены сеточные модели`,unsupportedFormat:`Неподдерживаемый формат файла`}},maintenanceDescriptions:{lubricateCarbonRods:`Смазать углепластиковые направляющие для плавного перемещения`,lubricateRails:`Смазать линейные направляющие для плавного перемещения`,cleanNozzle:`Очистить хотэнд и сопло для предотвращения засоров`,checkBelts:`Проверить натяжение ремней для сохранения точности печати`,cleanBuildPlate:`Очистить печатную пластину для улучшения адгезии`,checkExtruder:`Проверить шестерни экструдера на износ`,checkCooling:`Проверить исправность вентиляторов охлаждения`,generalInspection:`Общий осмотр принтера`,cleanCarbonRods:`Очистить углепластиковые направляющие для уменьшения трения`,lubricateSteelRods:`Смазать стальные направляющие для плавного перемещения`,cleanSteelRods:`Очистить стальные направляющие для уменьшения трения`,cleanLinearRails:`Протереть линейные направляющие от пыли и загрязнений`,checkPtfeTube:`Проверить PTFE-трубку на износ и повреждения`,replaceHepaFilter:`Заменить HEPA-фильтр`,replaceCarbonFilter:`Заменить угольный фильтр`,lubricateLeftNozzleRail:`Смазать направляющую левого сопла (серия H2)`},haSensors:{label:`Датчики`,unavailable:`Недоступно`,blocksPrints:`{{entity}} — удерживает печать, пока активно оповещение`,states:{open:`Открыто`,closed:`Закрыто`,unlocked:`Разблокировано`,locked:`Заблокировано`,detected:`Обнаружено`,clear:`Чисто`,wet:`Влажно`,dry:`Сухо`,problem:`Проблема`,ok:`Норма`,running:`Работает`,stopped:`Остановлено`,on:`Вкл`,off:`Выкл`},sectionTitle:`Датчики Home Assistant (принтеры)`,add:`Добавить датчик`,addTitle:`Добавить датчик Home Assistant`,editTitle:`Изменить датчик Home Assistant`,empty:`Датчиков пока нет. Свяжите дверной контакт или термометр из Home Assistant, чтобы показать его на карточке принтера.`,unknownPrinter:`Неизвестный принтер`,badgeBlocks:`Удерживает печать`,badgeNotifies:`Уведомляет`,badgeHidden:`Скрыт на карточке`,printer:`Принтер`,entity:`Сущность`,searchPlaceholder:`Поиск сущностей...`,noEntities:`Подходящих сущностей нет`,name:`Отображаемое имя`,alertWhen:`Оповещать когда`,alertNever:`Никогда — только показывать`,alertAbove:`Выше`,alertBelow:`Ниже`,alertHint:`Состояние оповещения подсвечивает датчик на карточке принтера и включает параметры ниже.`,showOnCard:`Показывать в карточке принтера`,notifyOnAlert:`Отправлять уведомление при срабатывании`,blockPrint:`Удерживать печать в очереди, пока активно оповещение`,blockPrintHint:`Задания остаются в очереди и запускаются сами, когда датчик приходит в норму. Игнорируется, пока Home Assistant недоступен.`,toast:{created:`Датчик добавлен`,updated:`Датчик сохранён`,deleted:`Датчик удалён`},error:{pickEntity:`Выберите сущность Home Assistant`,nameRequired:`Введите отображаемое имя`,printerRequired:`Выберите принтер`,alertRequired:`Сначала задайте условие оповещения`}},locationHaSensors:{sectionTitle:`Датчики Home Assistant (места хранения)`,sectionDescription:`Привяжите датчики температуры, влажности или заряда батареи Home Assistant к местам хранения, чтобы показывать актуальные значения на карточке филамента и в таблице. Для каждого места хранения допускается только один датчик на категорию.`,add:`Добавить датчик`,addTitle:`Добавить датчик Home Assistant`,editTitle:`Изменить датчик Home Assistant`,empty:`Датчиков пока нет. Свяжите датчик температуры или влажности из Home Assistant, чтобы показать его на карточке филамента.`,unknownLocation:`Неизвестное место`,location:`Место хранения`,showOnCard:`Показывать на карточке филамента`,overwriteConfirm:{title:`Заменить существующий датчик?`,messageTemperature:`У «{{location}}» уже привязан датчик температуры: {{name}}. Продолжение заменит его.`,messageHumidity:`У «{{location}}» уже привязан датчик влажности: {{name}}. Продолжение заменит его.`,messageBattery:`У «{{location}}» уже привязан датчик заряда батареи: {{name}}. Продолжение заменит его.`},autoAdd:{confirmTitle:`Добавить также остальные датчики?`,confirmMessage:`Bambuddy также нашёл другие датчики для этого места. Выберите, какие добавить.`,added:`Также добавлено: {{names}}`,noneFound:`Подходящие датчики температуры, влажности или заряда батареи для этого места не найдены.`,onlyThisOne:`Только этот`},options:{buttonLabel:`Настройки датчиков`,title:`Настройки датчиков места хранения`,description:`Эти значения используются, когда датчик температуры, влажности или заряда батареи привязывается автоматически вместе с первым датчиком места хранения.`,generalSettings:`Общие настройки`,pollInterval:`Интервал обновления (секунды)`,pollIntervalHint:`Как часто Bambuddy опрашивает Home Assistant и обновляет значения датчиков на экране. Минимум 60 секунд.`,colorizeValues:`Окрашивать значения датчиков в соответствии с их порогами тревоги`,aboveColor:`Цвет при превышении порога`,belowColor:`Цвет при значении ниже порога`,optimalColor:`Цвет оптимального значения`,colors:{red:`Красный`,orange:`Оранжевый`,yellow:`Жёлтый`,green:`Зелёный`,blue:`Синий`,purple:`Фиолетовый`,pink:`Розовый`},saved:`Настройки сохранены`,saveFailed:`Не удалось сохранить настройки`,reset:`Сбросить`,resetConfirm:{title:`Сбросить все существующие датчики мест хранения?`,message:`Это перезапишет пороги тревоги, уведомления и видимость на карточке для всех существующих датчиков температуры, влажности и заряда батареи мест хранения значениями, настроенными выше, а также восстановит имя каждого датчика до его понятного имени в Home Assistant — датчики принтеров не затрагиваются. Это действие нельзя отменить. В зависимости от количества датчиков это может занять некоторое время.`},resetDone:`Применено к {{count}} датчикам мест хранения`,resetFailed:`Не удалось сбросить датчики мест хранения`},deleteAllConfirm:{title:`Удалить все датчики?`,message:`Будут удалены все {{count}} датчиков, привязанных к «{{location}}». Это действие нельзя отменить.`},currentlyBound:`Сейчас привязан: {{entity}}`,error:{locationRequired:`Выберите место хранения`},toast:{created:`Датчик добавлен`,updated:`Датчик сохранён`,deleted:`Датчик удалён`}},smartPlugs:{offline:`Не в сети`,admin:`Управление`,openPlugAdminPage:`Открыть страницу управления розеткой`,deleteSmartPlug:`Удалить умную розетку`,turnOnSmartPlug:`Включить умную розетку`,turnOffSmartPlug:`Выключить умную розетку`,turnOn:`Включить`,turnOff:`Выключить`,addSmartPlug:{scanningNetwork:`Сканирование сети...`,chooseEntity:`Выберите сущность...`,connectionFailed:`Ошибка подключения`,searchEntities:`Поиск сущностей...`,searchPowerSensors:`Поиск датчиков мощности...`,searchEnergySensors:`Поиск датчиков энергии...`,placeholders:{plugName:`Розетка в гостиной`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Та же тема, что для мощности, или другая`}},linkedTo:`Связана с:`,monitorOnly:`Только мониторинг`,alerts:`Оповещения`,scheduleOn:`Включение в {{time}}`,scheduleOff:`Выключение в {{time}}`,on:`Включена`,off:`Выключена`,power:`Мощность`,kwhToday:`кВт·ч сегодня`,settings:`Настройки`,automationSettings:`Настройки автоматизации`,showInSwitchbar:`Показывать на панели переключателей`,quickAccessSidebar:`Быстрый доступ с боковой панели`,enabled:`Включено`,enableAutomation:`Включить автоматизацию для этой розетки`,autoOn:`Автовключение`,autoOnDescription:`Включать при начале печати`,autoOff:`Автовыключение`,autoOffDescription:`Выключать после завершения печати (однократно)`,autoOffPersistent:`Оставлять включённым`,autoOffPersistentDescription:`Не сбрасывать автовыключение после печати`,controlsPrinterPower:`Питает принтер`,controlsPrinterPowerDescription:`Отключите, если эта розетка питает только аксессуар (вентилятор фильтра, подсветку). Иначе её выключение помечает принтер как офлайн.`,autoOffAfterDrying:`Выключать после сушки`,autoOffAfterDryingDescription:`Выключать после завершения сушки в AMS`,delayAfterDryingMinutes:`Задержка после сушки (мин)`,turnOffDelayMode:`Условие отложенного выключения`,time:`Время`,temp:`Температура`,delayMinutes:`Задержка (мин)`,tempThreshold:`Порог температуры (°C)`,tempThresholdDescription:`Выключать, когда сопло остынет ниже этой температуры`,edit:`Изменить`,deleteConfirm:`Удалить «{{name}}»? Это действие нельзя отменить.`,turnOnConfirm:`Включить «{{name}}»?`,turnOffConfirm:`Выключить «{{name}}»? Питание подключённого устройства будет отключено.`,failedToTurn:`Не удалось {{action}} «{{name}}»`,unknown:`Неизвестно`,addTitle:`Добавление умной розетки`,editTitle:`Редактирование умной розетки`,stopScanning:`Остановить сканирование`,discoverTasmota:`Найти устройства Tasmota`,foundDevices:`Найдено устройств: {{count}}. Нажмите для выбора:`,noDevicesFound:`Устройства Tasmota в сети не найдены`,haNotConfigured:`Home Assistant не настроен. Настройте его в разделе`,haSettingsPath:`Настройки → Сеть → Home Assistant`,selectEntity:`Выберите сущность *`,ipAddress:`IP-адрес *`,nameLabel:`Название *`,username:`Имя пользователя`,password:`Пароль`,authHint:`Оставьте пустым, если устройство Tasmota не требует аутентификации`,linkToPrinter:`Связать с принтером`,noPrinter:`Без принтера — только ручное управление`,linkingDescription:`Связь позволяет автоматически включать и выключать питание при начале и завершении печати`,powerAlerts:`Оповещения о мощности`,alertAbove:`Оповещать выше (Вт)`,alertBelow:`Оповещать ниже (Вт)`,alertDescription:`Отправлять уведомление при пересечении заданных порогов мощности. Оставьте поле пустым, чтобы отключить соответствующий порог.`,dailySchedule:`Ежедневное расписание`,turnOnAt:`Включать в`,turnOffAt:`Выключать в`,scheduleDescription:`Ежедневно включать и выключать розетку в указанное время. Оставьте поле пустым, чтобы не выполнять соответствующее действие.`,showOnPrinterCard:`Показывать в карточке принтера`,displayOnPrinterCard:`Показывать кнопку в карточке принтера`,connectedResult:`Подключено!`,deviceLabel:`Устройство: {{name}} — `,stateLabel:`Состояние: {{state}}`,test:`Проверить`,delete:`Удалить`,save:`Сохранить`,add:`Добавить`,cancel:`Отмена`,failedToStartScan:`Не удалось запустить сканирование`,nameRequired:`Укажите название`,entityRequired:`Для розеток Home Assistant необходимо выбрать сущность`,mqttTopicRequired:`Для мониторинга мощности, энергии или состояния необходимо настроить хотя бы одну тему MQTT`,loadingEntities:`Загрузка сущностей...`,loading:`Загрузка...`,failedToLoadEntities:`Не удалось загрузить сущности: {{error}}`,noEntitiesMatching:`Сущности по запросу «{{search}}» не найдены`,noEntitiesAvailable:`Нет доступных сущностей`,searchingEntities:`Поиск по всем сущностям, найдено: {{count}}`,showingEntities:`Показаны switch, light и input_boolean, доступно: {{count}}`,energyMonitoringOptional:`Мониторинг энергии (необязательно)`,energyMonitoringHint:`Найдите и выберите датчики мощности и энергии.`,powerSensorW:`Датчик мощности (Вт)`,energyTodayKwh:`Энергия за сегодня (кВт·ч)`,totalEnergyKwh:`Общая энергия (кВт·ч)`,noMatchingSensors:`Подходящие датчики не найдены`,none:`Нет`,mqttNotConfigured:`Брокер MQTT не настроен. Укажите его адрес в разделе`,mqttSettingsPath:`Настройки → Сеть → Публикация MQTT`,mqttNotConfiguredSuffix:`Включать публикацию не обязательно — достаточно заполнить параметры брокера.`,mqttMonitorOnlyDescription:`Розетки MQTT получают данные мощности и энергии через подписку MQTT. Управление включением и выключением недоступно — используйте брокер MQTT или систему домашней автоматизации.`,powerMonitoring:`Мониторинг мощности`,energyMonitoring:`Мониторинг энергии`,stateMonitoring:`Мониторинг состояния`,optional:`необязательно`,topic:`Тема`,jsonPath:`Путь JSON`,multiplier:`Множитель`,onValue:`Значение «включено»`,mqttPowerHint:`Путь JSON извлекает значение из полезной нагрузки JSON, например «power_l1». Оставьте пустым, если тема публикует число напрямую.
 Для преобразования мВт→Вт используйте 0.001, для кВт→Вт — 1000.`,mqttEnergyHint:`Путь JSON извлекает значение из полезной нагрузки JSON. Оставьте пустым для числового значения напрямую.
 Для преобразования Вт·ч→кВт·ч используйте 0.001, для МВт·ч→кВт·ч — 1000.`,mqttStateHint:`Путь JSON извлекает значение из полезной нагрузки JSON. Оставьте пустым для значения напрямую.
-Значение «включено» — точная строка, означающая включённое состояние. Оставьте пустым для автоматического распознавания ON, true и 1.`,restControl:`Управление`,restOnUrl:`URL включения`,restOffUrl:`URL выключения`,restOnBody:`Тело запроса включения`,restOffBody:`Тело запроса выключения`,restMethod:`Метод HTTP`,restHeaders:`Пользовательские заголовки (JSON)`,restStatusUrl:`URL состояния`,restStatusPath:`Путь JSON состояния`,restStatusOnValue:`Значение «включено»`,restPowerUrl:`URL мощности`,restPowerPath:`Путь JSON мощности`,restPowerMultiplier:`Множитель мощности`,restEnergyUrl:`URL энергии`,restEnergyPath:`Путь JSON энергии`,restEnergyTotalPath:`Путь JSON полной энергии`,restEnergyTotalMultiplier:`Множитель полной энергии`,restEnergyTotalPathHint:`например, aenergy.total`,restEnergyTotalHint:`Многие розетки, включая все устройства Shelly, передают только накопительный счётчик энергии, который никогда не сбрасывается. Его следует указывать здесь, а не в поле выше: если считать его суточным расходом, значение не сбросится в полночь, а данные за вчера и общий расход останутся пустыми. Bambuddy вычисляет расход за сегодня и вчера по этому счётчику; для накопления данных потребуется один-два дня. Shelly передаёт ватт-часы, поэтому используйте множитель 0.001.`,restEnergyMultiplier:`Множитель энергии`,restUrlRequired:`Для REST-розетки необходимо указать хотя бы один URL: включения или выключения`,restHeadersHint:`например, {"Authorization": "Bearer your-token"}`,restBodyHint:`например, ON или {"state": "on"}`,restStatusHint:`URL для опроса текущего состояния`,restPathHint:`например, state или data.power.status`,restPowerUrlHint:`Отдельный URL данных мощности; если пусто, используется URL состояния`,restEnergyUrlHint:`Отдельный URL данных энергии; если пусто, используется URL состояния`,restEnergyHint:`Для каждого значения можно использовать отдельный URL либо URL состояния. Множители используются для преобразования единиц, например 0.001 для Вт·ч→кВт·ч.`,testConnection:`Проверить подключение`,connectionSuccess:`Подключение успешно`,noSwitchesInSwitchbar:`На панели переключателей нет устройств`,enableSwitchbarHint:`Включите «Показывать на панели переключателей» в разделе «Настройки → Умные розетки»`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`Электронная почта`,discord:`Discord`,webhook:`Вебхук`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`Уведомления по электронной почте через SMTP`,telegram:`Уведомления через Telegram-бота`,discord:`Отправка в канал Discord через вебхук`,ntfy:`Бесплатные push-уведомления с возможностью самостоятельного размещения сервера`,pushover:`Простые и надёжные push-уведомления`,callmebot:`Бесплатные уведомления WhatsApp через CallMeBot`,webhook:`Универсальный HTTP POST-запрос на любой URL`,homeassistant:`Постоянные уведомления на панели Home Assistant`,bark:`iOS push-уведомления через Bark (можно разместить у себя)`},lastSuccess:`Последняя отправка: {{date}}`,error:`Ошибка`,printer:`Принтер:`,allPrinters:`Все принтеры`,sendTestNotification:`Отправить тестовое уведомление`,eventSettings:`Настройки событий`,enabled:`Включено`,sendFromProvider:`Отправлять уведомления через этого провайдера`,printEvents:`События печати`,printerStatus:`Состояние принтера`,amsAlarms:`Предупреждения AMS`,amsHtAlarms:`Предупреждения AMS-HT`,printQueue:`Очередь печати`,start:`Запуск`,plateCheck:`Проверка пластины`,complete:`Завершено`,failed:`Ошибка`,stopped:`Остановлено`,progress:`Ход печати`,offline:`Не в сети`,lowFilament:`Мало филамента`,maintenance:`Обслуживание`,amsHumidity:`Влажность AMS`,amsTemp:`Температура AMS`,amsDryingSuspended:`Сушка приостановлена`,amsHtHumidity:`Влажность AMS-HT`,amsHtTemp:`Температура AMS-HT`,bedCooled:`Стол остыл`,firstLayer:`Первый слой`,quiet:`Тихий режим`,digest:`Сводка в {{time}}`,printStarted:`Печать началась`,plateNotEmpty:`Пластина не пуста`,plateNotEmptyDescription:`Перед печатью на пластине обнаружены объекты`,plateClearRequired:`Требуется подтверждение стола`,plateClearRequiredDescription:`Печать завершена, очередь ждет подтверждения`,plateClear:`Стол свободен`,printCompleted:`Печать завершена`,bedCooledLabel:`Стол остыл`,bedCooledDescription:`После печати температура стола опустилась ниже заданного порога`,firstLayerCompleteLabel:`Первый слой завершён`,firstLayerCompleteDescription:`Уведомить со снимком после завершения первого слоя`,missingSpoolAssignmentLabel:`Катушка не назначена`,billingChargeFailedLabel:`Ошибка списания`,billingChargeFailedDescription:`Уведомлять, если не удалось учесть стоимость печати`,missingSpoolAssignmentDescription:`Уведомить при запуске печати, если для необходимых слотов не назначены катушки`,printFailed:`Ошибка печати`,printStopped:`Печать остановлена`,progressMilestones:`Этапы выполнения`,progressMilestonesDescription:`Уведомлять при 25%, 50% и 75%`,printerOffline:`Принтер не в сети`,printerError:`Ошибка принтера`,aiFailureDetection:`Обнаружение сбоев с помощью ИИ`,aiFailureDetectionDescription:`Уведомить, если Obico AI обнаружит возможный сбой печати`,lowFilamentLabel:`Заканчивается филамент`,maintenanceDue:`Требуется обслуживание`,maintenanceDueDescription:`Уведомить, когда принтеру потребуется обслуживание`,amsHumidityHigh:`Высокая влажность в AMS`,amsHumidityHighDescription:`Влажность в обычной AMS превысила заданный порог`,amsTemperatureHigh:`Высокая температура в AMS`,amsTemperatureHighDescription:`Температура в обычной AMS превысила заданный порог`,amsDryingSuspendedTitle:`Автоматическая сушка приостановлена`,amsDryingSuspendedDescription:`Автоматическая сушка блока AMS прекращена: влажность так и не опустилась ниже порога`,amsHtHumidityHigh:`Высокая влажность в AMS-HT`,amsHtHumidityHighDescription:`Влажность в AMS-HT превысила заданный порог`,amsHtTemperatureHigh:`Высокая температура в AMS-HT`,amsHtTemperatureHighDescription:`Температура в AMS-HT превысила заданный порог`,inventoryAlerts:`Уведомления о запасах`,stockReorderAlert:`Пора заказывать`,stockReorderAlertDescription:`Запас по SKU достиг точки повторного заказа`,stockBreakAlert:`Риск исчерпания запаса`,stockBreakAlertDescription:`Запас закончится раньше, чем поступит пополнение`,jobAdded:`Задание добавлено`,jobAddedDescription:`Задание добавлено в очередь`,jobAssigned:`Задание назначено`,jobAssignedDescription:`Задание по модели назначено принтеру`,jobStarted:`Задание запущено`,jobStartedDescription:`Задание из очереди отправлено на печать`,jobWaiting:`Задание ожидает`,jobWaitingDescription:`Задание ожидает филамент или свободный принтер`,jobSkipped:`Задание пропущено`,jobSkippedDescription:`Задание пропущено из-за ошибки предыдущего`,jobFailed:`Не удалось запустить задание`,jobFailedDescription:`Задание не удалось отправить на печать`,queueComplete:`Очередь завершена`,queueCompleteDescription:`Все задания в очереди завершены`,quietHours:`Тихие часы`,noNotificationsDuring:`Не отправлять уведомления в это время`,editProviderToChangeQuietHours:`Измените провайдера, чтобы настроить тихие часы`,dailyDigest:`Ежедневная сводка`,batchNotifications:`Объединять уведомления в одну ежедневную сводку`,sendAt:`Отправлять в {{time}}`,editProviderToChangeDigestTime:`Измените провайдера, чтобы настроить время сводки`,edit:`Изменить`,deleteProvider:`Удалить провайдера уведомлений`,deleteConfirm:`Удалить «{{name}}»? Это действие нельзя отменить.`,delete:`Удалить`,addTitle:`Добавить провайдера уведомлений`,editTitle:`Изменить провайдера уведомлений`,nameLabel:`Название *`,namePlaceholder:`Мои уведомления`,providerTypeLabel:`Тип провайдера *`,configuration:`Настройка`,testConfiguration:`Проверить настройку`,printerFilter:`Фильтр принтеров`,onlyFromPrinter:`Отправлять уведомления только о событиях этого принтера`,quietHoursDnd:`Тихие часы (не беспокоить)`,quietStart:`Начало`,quietEnd:`Окончание`,dailyDigestLabel:`Ежедневная сводка`,sendDigestAt:`Отправлять сводку в`,digestCollected:`События будут собраны и отправлены одной сводкой в указанное время`,notificationEvents:`События для уведомлений`,progressPercent:`(25%, 50%, 75%)`,bedCooledAfterPrint:`(после завершения печати)`,haSensorAlert:`Оповещение датчика принтера`,haSensorAlertDescription:`(связанный датчик Home Assistant требует внимания)`,locationHaSensorAlert:`Оповещение датчика места хранения`,locationHaSensorAlertDescription:`(датчик Home Assistant, связанный с местом хранения, требует внимания)`,eventPriority:{sectionTitle:`Приоритет ntfy`,helpNtfy:`Выберите приоритет для каждого включённого события. ntfy использует его для усиления оповещений: звука, видимости и поведения push-уведомлений. Для неуказанных событий используется приоритет по умолчанию сервера ntfy.`,min:`Минимальный`,low:`Низкий`,default:`Обычный`,high:`Высокий`,urgent:`Срочный`},cancel:`Отмена`,save:`Сохранить`,add:`Добавить`,nameRequired:`Укажите название`,fieldRequired:`Поле «{{field}}» обязательно`,haDataInvalid:`Поле Data должно быть корректным JSON-объектом, напр. {"priority": "high", "ttl": 0}`,phoneNumber:`Номер телефона`,apiKey:`Ключ API`,serverUrl:`URL сервера`,topic:`Тема`,authToken:`Токен авторизации`,userKey:`Ключ пользователя`,appToken:`Токен приложения`,priority:`Приоритет`,pushoverRetry:`Повтор экстренного уведомления (с)`,pushoverExpire:`Срок действия экстренного уведомления (с)`,botToken:`Токен бота`,chatId:`ID чата`,telegramThreadId:`ID темы форума`,telegramThreadIdHelp:`Необязательно. Отправляет в конкретную тему форум-группы — последнее число в ссылке на тему (t.me/c/.../25). Оставьте пустым для темы General.`,telegramThreadIdInvalid:`ID темы форума должен быть числом.`,smtpServer:`SMTP-сервер`,smtpPort:`Порт SMTP`,security:`Защита соединения`,authentication:`Аутентификация`,username:`Имя пользователя`,password:`Пароль`,fromEmail:`Адрес отправителя`,toEmail:`Адрес получателя`,webhookUrl:`URL вебхука`,payloadFormat:`Формат данных`,authorization:`Авторизация`,titleFieldName:`Имя поля заголовка`,messageFieldName:`Имя поля сообщения`,editTemplate:`Изменить шаблон: {{name}}`,titleLabel:`Заголовок`,bodyLabel:`Текст`,titlePlaceholder:`Заголовок уведомления...`,bodyPlaceholder:`Текст уведомления...`,availableVariables:`Доступные переменные`,clickToInsert:`Нажмите, чтобы вставить в позицию курсора в тексте`,livePreview:`Предварительный просмотр`,hide:`Скрыть`,show:`Показать`,loadingPreview:`Загрузка предварительного просмотра...`,enterTemplateContent:`Введите содержимое шаблона для предварительного просмотра`,titlePreview:`Заголовок:`,bodyPreview:`Текст:`,resetToDefault:`Восстановить стандартный шаблон`,titleRequired:`Укажите заголовок`,bodyRequired:`Введите текст уведомления`,notificationLog:`Журнал уведомлений`,showFailedOnly:`Только неудачные`,last24Hours:`Последние 24 часа`,last7Days:`Последние 7 дней`,last30Days:`Последние 30 дней`,last90Days:`Последние 90 дней`,justNow:`Только что`,noFailedNotifications:`Неудачных уведомлений нет`,noNotificationsLogged:`В журнале пока нет уведомлений`,unknownProvider:`Неизвестный провайдер`,logTitle:`Заголовок`,logMessage:`Сообщение`,logError:`Ошибка`,logProvider:`Провайдер: {{type}}`,logTime:`Время: {{time}}`,refresh:`Обновить`,clearOld:`Удалить старые`,statsSummary:`За последние {{days}} дней:`,statsNotifications:`уведомлений`,statsSent:`отправлено: {{count}}`,statsFailed:`ошибок: {{count}}`,eventTypes:{print_start:`Печать началась`,print_complete:`Печать завершена`,print_failed:`Ошибка печати`,print_stopped:`Печать остановлена`,print_progress:`Ход печати`,printer_offline:`Принтер не в сети`,printer_error:`Ошибка принтера`,filament_low:`Заканчивается филамент`,maintenance_due:`Требуется обслуживание`,test:`Тест`},userEmail:{title:`Уведомления`,emailNotifications:`Уведомления по электронной почте`,emailNotificationsDesc:`Получать письма о собственных заданиях печати. Для отправки используются системные параметры SMTP из раздела расширенной аутентификации.`,sendingTo:`Уведомления будут отправляться на адрес`,noEmailWarning:`Для вашей учётной записи не указан адрес электронной почты. Обратитесь к администратору.`,printJobNotifications:`Уведомления о заданиях печати`,printJobNotificationsDesc:`Выберите события, при которых будут отправляться письма о запущенных вами заданиях.`,printJobStarts:`Запуск задания печати`,printJobStartsDesc:`Уведомлять о начале вашего задания печати.`,printJobFinishes:`Завершение задания печати`,printJobFinishesDesc:`Уведомлять об успешном завершении вашего задания печати.`,printErrors:`Ошибки печати`,printErrorsDesc:`Уведомлять, если задание завершилось ошибкой или при печати возникла проблема.`,printJobStops:`Остановка задания печати`,printJobStopsDesc:`Уведомлять об отмене или остановке вашего задания печати.`,saveSuccess:`Настройки уведомлений сохранены.`,saveError:`Не удалось сохранить настройки уведомлений.`}},richTextEditor:{bold:`Полужирный`,italic:`Курсив`,underline:`Подчёркивание`,bulletList:`Маркированный список`,numberedList:`Нумерованный список`,alignLeft:`По левому краю`,alignCenter:`По центру`,alignRight:`По правому краю`,addLink:`Добавить ссылку`,removeLink:`Удалить ссылку`},externalLinks:{title:`Ссылки на боковой панели`,sidebarLayout:`Боковая панель`,sidebarLayoutDescription:`Показывайте или скрывайте встроенные страницы, добавляйте внешние ссылки и перетаскивайте пункты, меняя порядок навигации.`,systemPages:`Страницы Bambuddy`,externalLinks:`Внешние ссылки`,visibleInSidebar:`Показывается на боковой панели`,hiddenFromSidebar:`Скрыто с боковой панели`,requiredInSidebar:`Обязательный пункт боковой панели`,hidePage:`Скрыть страницу`,showPage:`Показать страницу`,settingsCannotBeHidden:`Настройки нельзя скрыть`,noLinksConfigured:`Внешние ссылки не настроены`,deleteLink:`Удалить ссылку`,removeCustomIcon:`Удалить пользовательский значок`,openInNewTab:`Открывать в новой вкладке`,placeholders:{linkName:`Моя ссылка`}},keyboardShortcuts:{title:`Горячие клавиши`,navigation:`Навигация`,archivesSection:`Архив`,kProfilesSection:`K-профили`,generalSection:`Общие`,shortcuts:{goToPrinters:`Перейти к принтерам`,goToArchives:`Перейти в архив`,goToQueue:`Перейти к очереди`,goToStats:`Перейти к статистике`,goToProfiles:`Перейти к облачным профилям`,goToSettings:`Перейти к настройкам`,focusSearch:`Перейти в строку поиска`,openUploadModal:`Открыть окно загрузки`,clearSelection:`Снять выделение / убрать фокус с поля`,contextMenu:`Контекстное меню карточки`,refreshProfiles:`Обновить профили`,newProfile:`Новый профиль`,exitSelectionMode:`Выйти из режима выделения`,showHelp:`Показать эту справку`},footer:`Нажмите Esc или щёлкните снаружи, чтобы закрыть`},notificationLog:{title:`Журнал уведомлений`,events:{printStarted:`Печать началась`,printComplete:`Печать завершена`,printFailed:`Ошибка печати`,printStopped:`Печать остановлена`,progress:`Ход выполнения`,printerOffline:`Принтер не в сети`,printerError:`Ошибка принтера`,lowFilament:`Заканчивается филамент`,maintenanceDue:`Требуется обслуживание`,test:`Тест`},timeAgo:{justNow:`Только что`,minutesAgo:`{{minutes}} мин назад`,hoursAgo:`{{hours}} ч назад`}},restoreBackup:{title:`Восстановление резервной копии`,restoring:`Восстановление...`,restoreComplete:`Восстановление завершено`,restoreFailed:`Ошибка восстановления`,importSettings:`Импортировать настройки из файла резервной копии`,pleaseWait:`Подождите, пока данные восстанавливаются`,clickToSelect:`Нажмите, чтобы выбрать файл резервной копии (.json или .zip)`,howDuplicateHandling:`Как обрабатываются совпадения:`,categories:{printers:`Принтеры`,smartPlugs:`Умные розетки`,notificationProviders:`Провайдеры уведомлений`,filaments:`Филаменты`,archives:`Архив`,pendingUploads:`Ожидающие загрузки`,settingsTemplates:`Настройки и шаблоны`},matchingInfo:{printers:`сопоставляются по серийному номеру`,smartPlugs:`сопоставляются по IP-адресу`,notificationProviders:`сопоставляются по названию`,filaments:`сопоставляются по названию, типу и бренду`,archives:`сопоставляются по хешу содержимого`,pendingUploads:`сопоставляются по имени файла`,settingsTemplates:`всегда перезаписываются`},replaceExisting:`Заменить существующие данные`,keepExisting:`Сохранить существующие данные`,replaceDescription:`Перезаписать уже существующие элементы данными из резервной копии`,keepDescription:`Восстановить только отсутствующие элементы`,caution:`Внимание:`,cautionText:`При перезаписи текущая конфигурация будет заменена данными из резервной копии. В целях безопасности коды доступа к принтерам никогда не перезаписываются.`,itemsRestored:`Восстановлено элементов`,itemsSkipped:`Пропущено элементов`,restored:`Восстановлено`,skipped:`Пропущено (уже существует)`,filesLabel:`Файлы (3MF, миниатюры и т. п.)`,newApiKeysGenerated:`Созданы новые ключи API`,newApiKeysWarning:`Эти ключи показываются только один раз. Скопируйте их сейчас!`,processingBackup:`Обработка резервной копии...`,noDataFound:`В резервной копии не найдено данных для восстановления.`,failedToRestore:`Не удалось восстановить резервную копию. Проверьте формат файла.`},backupExport:{title:`Экспорт резервной копии`,selectData:`Выберите данные для включения`,selectAll:`Выбрать всё`,selectNone:`Снять выделение`,categoryDescriptions:{settings:`Язык, тема и настройки обновлений`,notifications:`ntfy, Pushover, Discord и другие`,templates:`Пользовательские шаблоны сообщений`,smartPlugs:`Конфигурация розеток Tasmota`,externalLinks:`Ссылки на внешние сервисы в боковой панели`,printers:`Сведения о принтерах (без кодов доступа)`,plateDetection:`Эталонные изображения пустых пластин`,filaments:`Типы и стоимость филамента`,maintenance:`Пользовательские графики обслуживания`,archives:`Все данные печати и файлы (3MF, миниатюры, фотографии)`,projects:`Проекты, позиции спецификаций и вложения`,pendingUploads:`Загрузки виртуальных принтеров, ожидающие проверки`,apiKeys:`Ключи API вебхуков (при импорте создаются новые)`},requiresPrinters:`Необходимо выбрать раздел «Принтеры»`,zipFileWarning:`Будет создан ZIP-файл.`,zipFileDescription:`В него войдут все файлы 3MF, миниатюры, таймлапсы и фотографии. Операция может занять некоторое время, а файл — получиться большим.`,includeAccessCodes:`Включить коды доступа`,includeAccessCodesDescription:`Для переноса на другой компьютер`,includeAccessCodesWarning:`Коды доступа попадут в файл открытым текстом. Храните резервную копию в безопасном месте!`,categoriesSelected:`Выбрано категорий: {{selectedCount}}`},pendingUploads:{placeholders:{notes:`Добавьте примечания об этой печати...`},discardUpload:`Отклонить загрузку`,archiveAllUploads:`Добавить все загрузки в архив`,discardAllUploads:`Отклонить все загрузки`,archive:`В архив`,timeAgo:{justNow:`Только что`,minutesAgo:`{{minutes}} мин назад`,hoursAgo:`{{hours}} ч назад`,daysAgo:`{{days}} дн. назад`}},apiBrowser:{placeholders:{requestBody:`Тело запроса JSON...`,searchEndpoints:`Поиск конечных точек...`}},configureAmsSlot:{title:`Настройка слота AMS`,slotConfigured:`Слот настроен!`,configuringSlot:`Настраивается слот:`,slotLabel:`{{ams}}, слот {{slot}}`,searchPresets:`Поиск профилей...`,colorPlaceholder:`Название или HEX-код цвета (например: brown, FF8800)`,clearCustomColor:`Очистить пользовательский цвет`,noCloudPresets:`Облачных профилей нет. Войдите в Bambu Cloud для синхронизации.`,noPresetsAvailable:`Нет доступных профилей. Войдите в Bambu Cloud или импортируйте локальные профили.`,noMatchingPresets:`Подходящие профили не найдены.`,custom:`Пользовательский`,builtin:`Встроенный`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Настройки отправлены на принтер`,filamentProfile:`Профиль филамента`,kProfileLabel:`K-профиль (Pressure Advance)`,filteringFor:`Фильтр по материалу: {{material}}`,noKProfile:`Без K-профиля (стандартное значение 0,020)`,noMatchingKProfiles:`Подходящие K-профили не найдены. Будет использовано стандартное значение K=0,020.`,otherKProfiles:`Другие K-профили на этом принтере`,selectFilamentFirst:`Сначала выберите профиль филамента`,kFromCalibration:`K={{value}} из калибровки принтера`,customColorLabel:`Пользовательский цвет (необязательно)`,presetColors:`Цвета {{name}}:`,showLessColors:`Показать меньше цветов`,showMoreColors:`Показать больше цветов`,clear:`Очистить`,hexLabel:`HEX: #{{hex}}`,resetting:`Сброс...`,resetSlot:`Сбросить слот`,cancel:`Отмена`,configuring:`Настройка...`,configureSlot:`Настроить слот`},githubBackup:{title:`Резервное копирование в Git`,history:`История`,downloadBackup:`Скачать резервную копию`,restoreBackup:`Восстановить резервную копию`,noBackupsYet:`Резервных копий пока нет`},emailSettings:{placeholders:{fromName:`BamBuddy`}},tagManagement:{searchTags:`Поиск меток...`,renameTag:`Переименовать метку`,deleteTag:`Удалить метку`},notificationTemplates:{placeholders:{title:`Заголовок уведомления...`,body:`Текст уведомления...`}},batchTag:{placeholders:{newTag:`Введите новую метку...`}},photoGallery:{deletePhoto:`Удалить фотографию`},filamentHoverCard:{copySpoolUuid:`Скопировать UUID катушки`},kProfilesView:{hasNote:`Есть примечание`,copyProfile:`Копировать профиль`},layout:{openMenu:`Открыть меню`,noPermissionSystemInfo:`У вас нет разрешения на просмотр системной информации`},dashboard:{dragToReorder:`Перетащите, чтобы изменить порядок`,hideWidget:`Скрыть виджет`},notificationProviderCard:{deleteNotificationProvider:`Удалить провайдера уведомлений`},fileManagerModal:{closeFileManager:`Закрыть файловый менеджер`,sortFiles:`Сортировать файлы`,goToParentFolder:`Перейти в родительскую папку`,threeView:`Просмотр 3D`},embeddedCameraViewer:{refreshStream:`Обновить поток`,close:`Закрыть`,zoomOut:`Уменьшить`,resetZoom:`Сбросить масштаб`,zoomIn:`Увеличить`,dragToResize:`Перетащите, чтобы изменить размер`},timelapseViewer:{skipBack5s:`Назад на 5 с`,skipForward5s:`Вперёд на 5 с`},notificationProviders:{descriptions:{email:`Уведомления по электронной почте через SMTP`,telegram:`Уведомления через Telegram-бота`,discord:`Отправка в канал Discord через вебхук`,ntfy:`Бесплатные push-уведомления с возможностью самостоятельного размещения сервера`,pushover:`Простые и надёжные push-уведомления`,callmebot:`Бесплатные уведомления WhatsApp через CallMeBot`,webhook:`Обычный HTTP POST на любой URL`}},logViewer:{searchPlaceholder:`Поиск по сообщению или имени логгера...`,noLogEntries:`Записи журнала не найдены`},switchbarPopover:{noSwitchesInSwitchbar:`На панели переключателей нет устройств`},projectPageModal:{placeholders:{title:`Название`,designer:`Автор`,license:`Лицензия`,description:`Введите описание...`,profileTitle:`Название профиля`,profileDescription:`Описание профиля...`}},spoolmanSettings:{},time:{unknown:`—`,waiting:`Ожидание`,justNow:`Только что`,now:`Сейчас`,minsAgo:`{{count}} мин назад`,inMins:`через {{count}} мин`,hoursAgo:`{{count}} ч назад`,inHours:`через {{count}} ч`,daysAgo:`{{count}} дн. назад`,inDays:`через {{count}} дн.`},spoolbuddy:{nav:{dashboard:`Панель`,ams:`AMS`,inventory:`Катушки`,writeTag:`Запись метки`,settings:`Настройки`},status:{nfcReady:`NFC готов`,nfcOff:`NFC выключен`,offline:`Не в сети`,online:`В сети`,noPrinters:`Нет принтеров`,deviceOffline:`Устройство не в сети`,waitingConnection:`Ожидание подключения устройства...`,systemReady:`Система готова`,status:`Состояние`},dashboard:{readyToScan:`Готово к сканированию`,idleMessage:`Поставьте катушку на весы для идентификации`,nfcHint:`Метка NFC будет считана автоматически`,device:`Устройство`,syncWeight:`Синхронизировать массу`,weightSynced:`Синхронизировано!`,unknownTag:`Неизвестная метка`,newTag:`Обнаружена новая метка`,onScale:`на весах`,linkSpool:`Связать с катушкой`,linkTagTitle:`Связать метку с катушкой`,linkTag:`Связать метку`,selectSpool:`Выберите катушку, с которой нужно связать эту метку:`,noUntagged:`Катушки без меток не найдены`,tagDetected:`Метка обнаружена`,noTag:`Метка отсутствует`,tagId:`Метка`,grossWeight:`Масса брутто`,spoolSize:`Размер катушки`,close:`Закрыть`,currentSpool:`Текущая катушка`,plateReady:`Пластина готова: {{name}}`,plateReadyLabel:`Пластины, готовые к очистке`,plateClearAction:`Очищено`,plateClearedToast:`Пластина отмечена как очищенная`,plateClearFailed:`Не удалось отметить пластину как очищенную`},modal:{spoolDetected:`Катушка обнаружена`,assignToAms:`Назначить в AMS`,syncWeight:`Синхронизировать массу`,weightSynced:`Синхронизировано!`,syncing:`Синхронизация...`,newTagDetected:`Обнаружена новая метка`,addToInventory:`Добавить в учёт`,assignToAmsTitle:`Назначить в AMS`,selectSlot:`Выберите слот`,assign:`Назначить`,assigning:`Назначение...`,assignSuccess:`Назначено!`,assignPendingInsert:`Назначено. Слот будет настроен после установки катушки.`,assignError:`Не удалось назначить катушку. Повторите попытку.`,noPrinterSelected:`Выберите принтер...`,noAmsDetected:`На этом принтере AMS не обнаружена`,slot:`Слот`},weight:{noReading:`Нет показаний`,stable:`Стабильно`,measuring:`Измерение...`,tare:`Тарировать`,calibrate:`Калибровать`},spool:{remaining:`Остаток`,material:`Материал`,brand:`Бренд`,color:`Цвет`,coreWeight:`Сердечник`,labelWeight:`По этикетке`,scaleWeight:`По весам`,netWeight:`Нетто`,lastUsed:`Последнее использование`,unknownColor:`Неизвестный цвет`},ams:{noData:`AMS не обнаружена`,connectAms:`Подключите AMS, чтобы увидеть слоты филамента`,noPrinter:`Принтер не выбран`,selectPrinter:`Выберите принтер на верхней панели`,printerDisconnected:`Принтер отключён`,humidity:`Влажность`,level:`Уровень`,active:`Активен`,slot:`Слот`,empty:`Пусто`},inventory:{search:`Поиск катушек...`,empty:`В учёте нет катушек`,noResults:`Подходящие катушки не найдены`,spools:`катушек`,addSpool:`Добавить катушку`},settings:{tabDevice:`Устройство`,tabDisplay:`Экран`,tabScale:`Весы`,tabUpdates:`Обновления`,nfcReader:`Считыватель NFC`,type:`Тип`,connection:`Подключение`,notConnected:`Н/Д`,deviceInfo:`Сведения об устройстве`,hostname:`Хост`,uptime:`Время работы`,systemConfig:`Бэкенд и авторизация`,backendUrl:`URL бэкенда Bambuddy`,apiToken:`Токен API`,apiTokenPlaceholder:`Введите токен API`,saveConfig:`Сохранить конфигурацию`,systemQueued:`Конфигурация поставлена в очередь.`,nfcDiagnostic:`Диагностика NFC`,scaleDiagnostic:`Диагностика весов`,readTagDiagnostic:`Диагностика чтения метки`,testNfc:`Проверить считыватель`,testScale:`Проверить точность`,testReadTag:`Считать метку`,systemFieldsRequired:`Необходимо указать URL бэкенда.`,brightness:`Яркость`,saved:`Сохранено`,noBacklight:`Подсветка DSI не обнаружена. Для управления яркостью требуется дисплей DSI.`,screenBlank:`Тайм-аут отключения экрана`,screenBlankDesc:`Экран выключается при бездействии. Коснитесь его для пробуждения.`,displayNote:`Яркость регулируется программным фильтром.`,scaleCalibration:`Калибровка весов`,currentWeight:`Текущая масса`,tareOffset:`Тара`,calFactor:`Коэффициент`,knownWeight:`Эталонная масса`,calStep1:`Уберите всё с весов и нажмите «Установить ноль».`,calStep2:`Положите на весы груз известной массы.`,setZero:`Установить ноль`,calibrateNow:`Калибровать`,calibrated:`Откалибровано`,tareSet:`Команда тарирования отправлена. Ожидание устройства...`,tareComplete:`Тарирование завершено!`,tareTimedOut:`Истекло время ожидания тарирования — демон SpoolBuddy запущен?`,tareFailed:`Не удалось отправить команду тарирования`,zeroSet:`Нулевая точка установлена. Положите на весы груз известной массы.`,calibrationDone:`Калибровка завершена!`,calibrationFailed:`Ошибка калибровки`,lastCalibrated:`Последняя калибровка`,stable:`Стабильно`,settling:`Стабилизация...`,firmware:`Прошивка`,scale:`Весы`,noDevice:`Устройство SpoolBuddy не найдено`,daemonVersion:`Версия демона`,currentVersion:`Текущая`,versionPending:`Ожидание демона...`,checking:`Проверка...`,checkUpdates:`Проверить обновления`,updateAvailable:`Доступно обновление`,updateInstructions:`Обновление по SSH: запустите установочный скрипт SpoolBuddy.`,upToDate:`Установлена актуальная версия`,includeBeta:`Включать бета-версии`},writeTag:{tabExisting:`Существующая катушка`,tabNew:`Новая катушка`,tabReplace:`Заменить метку`,searchPlaceholder:`Поиск по материалу, цвету или бренду...`,noUntaggedSpools:`Нет катушек без меток`,noTaggedSpools:`Нет катушек с метками`,selectSpool:`Выберите катушку, затем положите чистую метку NTAG на считыватель`,placeTag:`Положите метку NTAG на считыватель`,tagReady:`Метка обнаружена — можно записывать`,writeTag:`Записать метку`,replaceTag:`Заменить метку`,writing:`Запись метки...`,waiting:`Ожидание SpoolBuddy...`,writeSuccess:`Метка успешно записана!`,writeFailed:`Ошибка записи`,queueFailed:`Не удалось поставить команду записи в очередь`,tryAgain:`Повторить`,cancel:`Отмена`,replaceWarning:`Старая метка будет отвязана и заменена новой.`,deviceOffline:`SpoolBuddy не в сети`,material:`Материал`,colorName:`Название цвета`,color:`Цвет`,brand:`Бренд`,weight:`Масса (г)`,createSpool:`Создать катушку`,creating:`Создание...`,spoolCreated:`Катушка создана! Можно записывать метку.`,createFailed:`Не удалось создать катушку`,incompleteDataWarning:`Метка записана с неполными данными Spoolman`},quickMenu:{printerPower:`Питание принтера`,systemControls:`Система`,restartDaemon:`Перезапустить демон`,restartBrowser:`Перезапустить браузер`,reboot:`Перезагрузить`,shutdown:`Выключить`,swipeToClose:`Проведите вниз, чтобы закрыть`,confirmTitle:`Подтверждение`,confirmShutdown:`Выключить SpoolBuddy? Для повторного включения потребуется физический доступ.`,confirmReboot:`Перезагрузить SpoolBuddy?`,confirmRestartDaemon:`Перезапустить демон SpoolBuddy? NFC и весы временно будут недоступны.`,confirmRestartBrowser:`Перезапустить браузер киоска? Экран ненадолго погаснет.`,confirm:`Подтвердить`,confirmPlugOn:`Включить {{name}}?`,confirmPlugOff:`Выключить {{name}}?`,turnOn:`Включить`,turnOff:`Выключить`}},diagnostic:{modalTitle:`Диагностика подключения — {{name}}`,running:`Выполняется диагностика...`,runningElapsed:`Выполняется диагностика... ({{elapsed}} с)`,waitingForReportHint:`Ожидание публикации отчёта о состоянии принтера — это может занять до {{max}} секунд.`,runFailed:`Не удалось выполнить диагностику: {{error}}`,retry:`Запустить снова`,runButton:`Запустить диагностику`,sectionTitle:`Диагностика подключения`,sectionDescription:`Проверьте, почему принтер не подключается или не печатает: доступность портов, режим разработчика LAN, сетевой режим Docker и учётные данные.`,noPrinters:`Принтеры не настроены.`,overall:{ok:`Проблем не обнаружено — подключение к принтеру исправно.`,warnings:`Принтер должен работать, но некоторые пункты требуют внимания.`,problems:`Обнаружены проблемы, объясняющие, почему принтер не подключается или не печатает.`},check:{port_mqtt:{title:`Порт управления (MQTT 8883)`,pass:`Доступен — принтер принимает управляющие подключения.`,fail:`Порт 8883 недоступен. Принтер выключен, имеет другой IP-адрес либо подключение блокирует межсетевой экран. Проверьте IP-адрес принтера и доступность порта 8883.`},port_ftps:{title:`Порт передачи файлов (FTPS 990)`,pass:`Доступен — отправка файлов печати будет работать.`,warn:`Порт 990 недоступен. Мониторинг может работать, но отправка заданий на принтер завершится ошибкой. Убедитесь, что порт 990 не заблокирован.`,warn_no_tls:`Порт 990 открыт, но файловая служба принтера не завершает рукопожатие TLS. Файлы печати, обложки и таймлапсы получить невозможно, поэтому архивы остаются пустыми. Перезагрузите принтер — разблокировка порта не поможет.`},external_storage:{title:`Сохранять отправленные файлы во внешнем хранилище (шаг 4 установки)`,pass:`Принтер сообщает, что параметр включён: отправленные файлы будут сохраняться на SD-карте, а в архиве появятся миниатюры и метаданные слайсера.`,fail:`Принтер сообщает, что параметр выключен. Включите «Сохранять отправленные файлы во внешнем хранилище»: в новых прошивках (P2S 01.02 / Bambu Studio 2.6+) переключатель находится в настройках печати принтера, в старых — на вкладке «Устройство» Bambu Studio / OrcaSlicer. Без этого у всех архивных заданий не будет миниатюр и метаданных слайсера.`,skip:`Не проверено — требуется активное подключение MQTT. В старых версиях слайсеров этот параметр существует только в слайсере и принтер его не сообщает, поэтому проверка может пройти даже при выключенном параметре. Проверьте шаг 4 установки вручную.`,skip_unsupported_model:`В этой модели есть слот SD-карты, но включить соответствующую функцию невозможно: текущая прошивка серии P1 не предоставляет переключатель в Bambu Studio, а у принтера нет экрана. Исправлять здесь нечего. Пока Bambu Lab не добавит поддержку в прошивку, архивные задания могут сохраняться без миниатюр и метаданных слайсера.`,fail_no_media:`Параметр включён, но принтер не видит ни карты, ни флешки в слоте, поэтому отправленным файлам некуда деваться. Вставьте накопитель и напечатайте снова — до тех пор у каждой архивной печати не будет ни миниатюры, ни метаданных слайсера.`,warn_internal_storage:`Параметр включён и накопитель на месте, но последняя печать всё равно ушла во внутреннюю память принтера, которую Bambuddy не может прочитать. На серии H2, P2S и X2D кнопка «Печать» в Bambu Studio всегда отправляет туда, независимо от этого параметра. Печати архивируются с именем и временем, но без миниатюры и метаданных слайсера. Чтобы архивы были полными, запускайте печать из Bambuddy, нарезайте в OrcaSlicer или в Bambu Studio используйте «Отправить» с «Внешним накопителем», а затем запускайте печать.`,warn_internal_history:`Опция включена и накопитель на месте, но последняя печать шла из файла, который уже был на принтере, — повторная печать с его экрана, запуск из Handy или файл, отправленный раньше. Эта библиотека лежит во внутренней памяти, которую Bambuddy не читает, и никакие настройки этого не меняют: для той печати ничего не отправлялось. Она по-прежнему архивируется с именем и временем, но без миниатюры и метаданных слайсера. Чтобы архивы были полными, запускайте печать из Bambuddy или отправляйте её из слайсера.`},port_rtsps:{title:`Порт камеры ({{protocol}} {{port}})`,pass:`Доступен — видеопоток камеры будет работать.`,warn:`Порт {{port}} недоступен. Просмотр камеры в реальном времени работать не будет. На печать это не влияет.`},macos_local_network:{title:`Разрешение macOS на доступ к локальной сети`,pass:`macOS разрешает Bambuddy доступ к локальной сети.`,warn_unsigned:`У Python, под которым работает Bambuddy, нет подписи кода, поэтому macOS не к чему привязать разрешение на доступ к локальной сети и молча отбрасывает все подключения к принтеру — без ошибки и без запроса. Запустите сценарий обновления Bambuddy (install/update_macos.sh), который подписывает его, и перезапустите Bambuddy. Интерпретатор: {{executable}}`,warn_permission:`Если принтер включён и доступен по этому адресу, откройте Настройки системы > Конфиденциальность и безопасность > Локальная сеть и убедитесь, что Python, под которым работает Bambuddy, включён. Иначе macOS молча отбрасывает локальные подключения, а обновление Python может оставить старое разрешение позади.`},network_mode:{title:`Сетевой режим контейнера`,genericRuntime:`контейнере`,pass:`Работает в {{runtime}} с сетью host.`,warn:`Bambuddy работает в {{runtime}} с сетью bridge. Для обнаружения принтеров и виртуального принтера требуется сеть host — пересоздайте контейнер с сетью host («network_mode: host» в docker-compose, «--network=host» для Podman).`,skip:`Bambuddy запущен не в контейнере — проверка неприменима.`,skip_unknown:`Bambuddy работает в {{runtime}}, но определить сетевой режим не удалось. Если обнаружение принтеров или виртуальный принтер не работают, пересоздайте контейнер с сетью host.`,skip_system_container:`Bambuddy работает в системном контейнере {{runtime}}, который находится в локальной сети как виртуальная машина — проверка неприменима.`},subnet:{title:`Подсеть`,pass:`Принтер и Bambuddy находятся в одной подсети.`,warn:`Принтер ({{printer_ip}}) и Bambuddy ({{host_ip}}) находятся в разных подсетях. Без настроенной маршрутизации между подсетями они могут быть недоступны друг для друга.`,skip:`Не удалось определить подсеть — проверка пропущена.`},mqtt_auth:{title:`Учётные данные принтера`,pass:`Принтер принял подключение.`,fail:`Принтер доступен, но Bambuddy к нему не подключён. Скорее всего, неверны код доступа или серийный номер — код доступа изменяется при каждом переключении режима «Только LAN» или режима разработчика, поэтому снова скопируйте его с экрана принтера. Так же выглядит принтер, который перезагружается или уже исчерпал лимит одновременных подключений.`,fail_auth_rejected:`Принтер отклонил учётные данные Bambuddy. Код доступа или серийный номер неверны — код доступа изменяется при каждом переключении режима «Только LAN» или режима разработчика. Снова скопируйте его с экрана принтера и сохраните в настройках принтера.`,skip:`Не проверено — принтер недоступен.`},developer_mode:{title:`Режим разработчика LAN`,pass:`Режим разработчика включён.`,fail:`Режим разработчика на принтере ВЫКЛЮЧЕН. Включите его в настройках LAN принтера и подтвердите кнопкой OK. Без него задания печати не запускаются.`,skip:`Не удалось проверить — требуется активное подключение к принтеру.`},printer_publishing:{title:`Принтер публикует состояние`,pass:`Принтер публикует обновления состояния — AMS, филаменты и K-профили будут корректно передаваться в слайсер.`,fail:`MQTT-брокер принял подключение, но принтер не опубликовал ни одного отчёта о состоянии. Почти всегда причина в неверном регистре или ошибке в серийном номере: тема device/<serial>/report чувствительна к регистру. Сверьте серийный номер в настройках принтера с номером на его экране.`,skip:`Не удалось проверить — требуется активное подключение к принтеру.`}}},systemHealth:{sectionTitle:`Состояние системы`,sectionDescription:`Проверяет последние журналы на известные проблемы, которые обычно можно исправить самостоятельно до обращения в поддержку.`,rescan:`Проверить снова`,clean:`В последних {{times}} записях журнала известные проблемы не найдены.`,logUnavailable:`Запись журналов в файл отключена, поэтому выполнить проверку невозможно. Включите файловое журналирование.`,learnMore:`Как исправить`,fixLabel:`Исправление:`,occurrences:`Обнаружено {{times}} раз; последний раз — {{lastSeen}}`,category:{layer8:`Можно исправить самостоятельно`,environment:`Окружение`,bug:`Сообщите об ошибке`},signature:{"ftp-auth-rejected":{name:`Принтер отклонил код доступа`,cause:`Принтер отклонил вход в службу передачи файлов. Код доступа неверен либо изменился после переключения режима разработчика.`,fix:`Снова скопируйте код доступа с экрана принтера в настройках LAN и обновите его в настройках принтера Bambuddy.`},"ftp-connection-timeout":{name:`Истекло время подключения к службе передачи файлов`,cause:`Bambuddy не смог подключиться к порту передачи файлов принтера (FTPS 990). Порт заблокирован, принтер выключен либо находится в другой подсети.`,fix:`Убедитесь, что порт 990 между Bambuddy и принтером не блокируется и оба устройства находятся в доступных друг другу сетях.`},"ftp-ssl-error":{name:`Ошибка защищённого соединения с файловой службой`,cause:`Файловая служба принтера ответила на порту 990 без TLS. Её файловый сервер завис — это неисправность самого принтера, а не межсетевого экрана или прошивки.`,fix:`Перезапустите принтер. До этого файлы печати, обложки и таймлапсы получить нельзя, но на саму печать это не влияет.`},"bambu-cloud-captcha":{name:`Bambu Cloud требует пройти CAPTCHA`,cause:`Защита Bambu от злоупотреблений проверяет эту сеть, поэтому вход в Bambu Cloud завершить невозможно. Это связано с публичным IP-адресом, а не с вашей учётной записью или этой установкой.`,fix:`Подождите: обычно проверка снимается за несколько часов, а повторные попытки входа её продлевают. Пока что войдите с помощью токена доступа из сессии браузера.`},"mqtt-connection-flapping":{name:`Подключение к принтеру постоянно обрывается`,cause:`Управляющее соединение MQTT 8883 постоянно разрывается и восстанавливается. Обычно причина в нестабильной сети или частично заблокированном порте.`,fix:`Проверьте уровень Wi‑Fi у принтера, по возможности используйте проводное подключение и убедитесь в стабильной доступности порта 8883.`},"camera-connection-refused":{name:`Видеопоток камеры недоступен`,cause:`Камера недоступна по порту RTSPS 322. Порт заблокирован либо на принтере выключены камера или просмотр по LAN.`,fix:`Включите камеру и просмотр по LAN на принтере и убедитесь, что порт 322 не заблокирован. На печать это не влияет.`},"database-locked":{name:`Конфликт записи в базу данных`,cause:`Под нагрузкой SQLite выдаёт ошибки «database is locked». Это часто происходит при одновременной работе с несколькими принтерами.`,fix:`Переведите Bambuddy на внешнюю базу PostgreSQL. См. руководство по PostgreSQL в документации.`}}},vpDiagnostic:{title:`Проверка настройки — {{name}}`,runButton:`Запустить проверку`,running:`Выполняется проверка настройки...`,runFailed:`Не удалось выполнить проверку: {{error}}`,retry:`Запустить снова`,overall:{ok:`Все проверки пройдены — виртуальный принтер настроен правильно.`,warnings:`Виртуальный принтер должен работать, но некоторые пункты требуют внимания.`,problems:`Обнаружены проблемы, из-за которых слайсер не видит или не может использовать виртуальный принтер.`},check:{enabled:{title:`Виртуальный принтер включён`,fail:`Виртуальный принтер выключен. Включите его, чтобы он обнаруживался в сети.`},running:{title:`Службы запущены`,fail:`Виртуальный принтер включён, но его службы не работают. Проверьте журнал Bambuddy: обычно запуску мешает конфликт IP-адреса привязки или ошибка прав доступа.`},bind_interface:{title:`Сетевой интерфейс привязки`,fail:`Интерфейс привязки не задан или больше не существует на этом хосте. Выберите актуальный интерфейс в списке «Интерфейс привязки».`},access_code:{title:`Код доступа задан`,fail:`Код доступа не задан. В слайсере необходимо указать тот же восьмизначный код, который задан здесь.`},target_printer:{title:`Целевой принтер`,fail:`Целевой принтер не выбран. Для режима прокси необходимо указать реальный принтер.`,warn:`Целевой принтер сейчас не в сети. Перенаправление возобновится после его подключения.`},port_ftps:{title:`Служба загрузки файлов (порт {{port}})`,fail:`На порту {{port}} выбранного IP-адреса никто не слушает, поэтому слайсер не сможет загружать файлы. Обычно причина в конфликте порта на этом интерфейсе.`},port_mqtt:{title:`Служба управления (порт {{port}})`,fail:`На порту {{port}} выбранного IP-адреса никто не слушает, поэтому слайсер не сможет подключиться и отображать состояние.`},port_bind:{title:`Служба обнаружения (порт {{port}})`,fail:`На порту {{port}} выбранного IP-адреса никто не слушает, поэтому сетевое обнаружение слайсером не работает.`},privileged_ports:{title:`Привязка к привилегированным портам`,fail:`Порт {{port}} ниже 1024, и этой службе не разрешено его занимать — поэтому выше ничего не слушает. Добавьте AmbientCapabilities=CAP_NET_BIND_SERVICE в /etc/systemd/system/bambuddy.service и перезапустите либо выполните "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))". В Docker добавьте cap_add: [NET_BIND_SERVICE].`},certificate:{title:`Сертификат TLS`,pass:`Сертификат готов. Убедитесь, что сертификат центра сертификации Bambuddy, указанный выше, импортирован в доверенное хранилище слайсера.`,fail:`Сертификат TLS для этого виртуального принтера отсутствует. Проверьте права записи в каталог данных Bambuddy.`}}},bugReport:{title:`Сообщить об ошибке`,description:`Описание`,descriptionPlaceholder:`Что пошло не так? Опишите проблему...`,email:`Электронная почта (необязательно)`,emailPlaceholder:`your@email.com`,emailPrivacy:`Указанный адрес будет добавлен в сворачиваемый раздел задачи GitHub, чтобы сопровождающий мог с вами связаться.`,screenshot:`Снимок экрана`,uploadOrPaste:`Загрузите, вставьте или перетащите изображение`,dataCollectedSummary:`Какие данные включаются в отчёт?`,dataIncluded:`Включаются:`,dataIncludedList:`Версия приложения, ОС, архитектура, версия Python, статистика базы данных (только количества), модели принтеров, количество сопел, версии прошивок, состояние подключений, состояние интеграций (Spoolman, MQTT, HA), неконфиденциальные настройки, количество сетевых интерфейсов, сведения о Docker и версии зависимостей.`,dataNeverIncluded:`Никогда не включаются:`,dataNeverIncludedList:`Имена принтеров, серийные номера, коды доступа, пароли, IP-адреса, адреса электронной почты, ключи API, токены, URL вебхуков, имена хостов и пользователей.`,submit:`Отправить`,startLogging:`Начать отладочную запись`,stepEnableLogging:`Отладочная запись включена`,stepReproduce:`Теперь воспроизведите проблему`,stepStopLogging:`Остановить и отправить отчёт`,stopAndSubmit:`Остановить и отправить`,maxDuration:`Автоматическая остановка через {{minutes}} мин`,stoppingLogs:`Сбор журналов и отправка...`,submitting:`Отправка отчёта об ошибке...`,submittingStepConnection:`Проверка подключений к принтерам`,submittingStepVirtualPrinters:`Проверка настройки виртуальных принтеров`,submittingStepLogScan:`Поиск известных проблем в последних журналах`,submittingStepSubmit:`Отправка отчёта в GitHub`,submitSuccess:`Отчёт об ошибке успешно отправлен!`,submitFailed:`Не удалось отправить отчёт об ошибке`,diagnosticChecking:`Проверка подключений к принтерам...`,diagnosticHealthy:`Проверка подключения пройдена — проблем с принтерами не обнаружено.`,diagnosticSummary:`Проблемы с подключением обнаружены у {{problems}} из {{total}} принтеров`,diagnosticIntro:`У одного или нескольких принтеров есть проблема подключения, которая может быть причиной сбоя. Разверните сведения о принтере ниже и посмотрите способ исправления — возможно, отчёт об ошибке не потребуется. При необходимости его всё равно можно отправить ниже.`,logHealthSummary:`В журналах найдены известные проблемы`,logHealthIntro:`Последние записи журнала совпадают с известными проблемами. Посмотрите способы исправления ниже — возможно, отчёт об ошибке не потребуется. При необходимости его всё равно можно отправить.`,thankYou:`Спасибо!`,submitted:`Отчёт об ошибке отправлен.`,viewIssue:`Открыть задачу`,closeKeepsRecording:`Вы можете закрыть эту панель, пока воспроизводите проблему: запись продолжается, и при повторном открытии вы вернётесь сюда.`,resumeRecording:`Идёт запись отчёта об ошибке — {{elapsed}}. Нажмите, чтобы завершить.`,resumeReport:`Продолжить отчёт`,unexpectedError:`Произошла непредвиденная ошибка`},failureDetection:{title:`Обнаружение сбоев с помощью ИИ`,description:`Контролируйте печать через собственный сервер Obico ML API и автоматически реагируйте на обнаруженные сбои.`,mlUrl:`URL Obico ML API`,mlUrlHint:`Базовый URL собственного контейнера Obico ml_api, например http://192.168.1.10:3333.`,mlToken:`Токен ML API (необязательно)`,mlTokenPlaceholder:`Оставьте пустым, если сервер работает без ML_API_TOKEN`,mlTokenHint:`Должен совпадать с переменной окружения ML_API_TOKEN вашего контейнера Obico ml_api. Оставьте пустым, если контейнер работает без токена.`,test:`Проверить`,testSuccess:`ML API доступен и работает.`,testSuccessTokenUnknown:`ML API доступен и работает. Проверить токен не удалось.`,testFailed:`Не удалось подключиться к ML API.`,sensitivity:`Чувствительность`,sensitivityLow:`Низкая (меньше ложных срабатываний)`,sensitivityMedium:`Средняя (сбалансированная)`,sensitivityHigh:`Высокая (раннее обнаружение, больше ложных срабатываний)`,sensitivityHint:`Определяет пороги уверенности, при которых создаются предупреждения и фиксируются сбои.`,action:`Действие при обнаружении сбоя`,actionNotify:`Только уведомить`,actionPause:`Приостановить печать`,actionPauseOff:`Приостановить печать и отключить питание`,pollInterval:`Интервал проверки (секунды)`,pollIntervalHint:`Как часто проверять каждый принтер во время печати. Минимум 5 с, максимум 120 с.`,externalUrlMissing:`Внешний URL не задан.`,externalUrlHint:`ML API получает снимок камеры по URL. Укажите внешний URL в общих настройках, чтобы контейнер ML API мог обращаться к Bambuddy.`,perPrinterTitle:`Контролируемые принтеры`,perPrinterHint:`Выберите принтеры, за которыми будет следить служба обнаружения.`,monitorAll:`Контролировать все подключённые принтеры`,statusTitle:`Состояние`,serviceRunning:`Служба работает`,thresholds:`Низкий / высокий порог`,activePrinters:`Активные задания`,noActivePrints:`Сейчас ничего не печатается.`,historyTitle:`Последние обнаружения`,noHistory:`Обнаружений пока нет.`},makerworld:{title:`MakerWorld`,description:`Вставьте URL модели MakerWorld, чтобы импортировать и напечатать её прямо из Bambuddy — без перехода в приложение Bambu Handy.`,pasteUrlHeader:`Импорт из MakerWorld`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… или любая ссылка MakerWorld`,resolveButton:`Получить данные`,signInRequiredTitle:`Для загрузки требуется вход в Bambu Cloud`,signInRequiredBody:`Просматривать сведения о модели можно анонимно, но для загрузки файлов 3MF MakerWorld требует учётную запись Bambu Cloud.`,signInExpiredTitle:`Срок авторизации в Bambu Cloud истёк`,signInExpiredBody:`Вы по-прежнему авторизованы в Bambuddy, но Bambu Lab перестал принимать сохранённый токен, поэтому загрузки завершатся ошибкой. Выполните вход в Bambu Cloud снова.`,openCloudSettings:`Открыть настройки облака`,untitledModel:`Модель без названия`,byCreator:`Автор: {{name}}`,downloadsCount:`Загрузок: {{count}}`,licensePrefix:`Лицензия`,alreadyImported:`Уже в библиотеке`,openOnMakerworld:`Открыть на MakerWorld`,alreadyInLibrary:`Эта модель уже есть в библиотеке — найдите её в разделе «Файлы → MakerWorld».`,importSuccess:`Импортирован файл {{filename}} — сохранён в «Файлы → MakerWorld».`,platesHeader:`Пластины ({{count}})`,plateDefaultName:`Пластина {{n}}`,materialCount:`Филаментов: {{count}}`,amsRequired:`Требуется AMS`,slicedFor:`Нарезано для {{printer}}`,alsoCompatible:`Также отмечено как совместимое: {{printers}}`,importToLibrary:`Сохранить`,sliceIn:`Сохранить и нарезать в {{slicer}}`,disclaimer:`Интеграция с MakerWorld использует документированные сообществом конечные точки API. Bambuddy не связан с MakerWorld или Bambu Lab и не одобрен ими.`,lastImportSuccess:`Импортировано в библиотеку`,lastImportAlreadyInLibrary:`Уже в библиотеке`,viewInLibrary:`Открыть в файловом менеджере`,openInBambuStudio:`Открыть в Bambu Studio`,openInOrcaSlicer:`Открыть в OrcaSlicer`,importTo:`Импортировать в файловый менеджер`,recentImportsHeader:`Недавние импорты`,phaseResolving:`Получение данных`,phaseDownloading:`Загрузка`,folderAuto:`MakerWorld (по умолчанию)`,importAll:`Импортировать всё`,importAllProgress:`Импорт {{current}} из {{total}}`,openGallery:`Открыть галерею изображений`,galleryPrev:`Предыдущее изображение`,galleryNext:`Следующее изображение`,deleteImport:`Удалить из библиотеки`,importDeleting:`Удаление…`,importDeleted:`Удалено из библиотеки`,confirmDelete:`Удалить {{filename}} из библиотеки? Локальный файл будет удалён, но пластину можно снова импортировать из MakerWorld.`,errors:{resolveFailed:`Не удалось обработать эту ссылку MakerWorld.`,downloadFailed:`Ошибка загрузки. Повторите попытку.`,deleteFailed:`Не удалось удалить файл из библиотеки.`}},gcodeViewer:{filamentSlot:`Филамент {{n}}`,loading:`Чтение траектории…`,loadFailed:`Не удалось загрузить G-код этого файла.`,showTravel:`Холостые перемещения`,topLayer:`Верхний слой`,bottomLayer:`Нижний слой`,noSource:`Файл для предпросмотра не указан.`,view:{filament:`Филамент`,feature:`Тип`,height:`Высота`,width:`Ширина`},feature:{wall:`Стенки`,sparseInfill:`Разреженное заполнение`,solidInfill:`Сплошное заполнение`,bridge:`Мост / нависание`,support:`Поддержка`,skirt:`Юбка / кайма`,gapFill:`Заполнение зазоров`,ironing:`Разглаживание`,primeTower:`Башня очистки`},back:`Назад`,backToArchives:`Вернуться в архив печати`,backToFiles:`Вернуться в файловый менеджер`,plates:`Пластины`,plateN:`Пластина {{n}}`},libraryTrash:{title:`Корзина`,headerButton:`Корзина`,headerTooltip:`Просмотреть файлы, перемещённые в корзину`,backToFiles:`Вернуться к файлам`,subtitleAdmin:`Удалённые файлы хранятся здесь {{days}} дней, затем удаляются автоматически. Показаны файлы всех пользователей.`,subtitleUser:`Удалённые файлы хранятся здесь {{days}} дней, затем удаляются автоматически.`,loading:`Загрузка корзины…`,loadError:`Не удалось загрузить корзину.`,empty:`Корзина пуста.`,summary:`{{count}} файлов · {{size}}`,emptyTrash:`Очистить корзину`,restore:`Восстановить`,purgeNow:`Удалить сейчас`,autoPurgeIn:`Автоудаление через {{when}}`,days:`дней`,retentionLabel:`Автоудаление через`,selectAll:`Выбрать всё`,selectOne:`Выбрать {{filename}}`,selectionCount:`Выбрано: {{count}}`,bulkRestore:`Восстановить выбранные`,bulkPurge:`Удалить выбранные`,col:{filename:`Файл`,folder:`Папка`,size:`Размер`,deleted:`Перемещён в корзину`,autoPurge:`Автоудаление`,owner:`Владелец`,actions:`Действия`},confirm:{purgeTitle:`Удалить навсегда?`,purgeBody:`Файл {{filename}} будет удалён с диска без возможности восстановления.`,emptyTitle:`Очистить корзину?`,emptyBody:`Все файлы ({{count}}) будут удалены с диска. Отменить это действие нельзя.`,bulkPurgeTitle:`Удалить выбранные файлы навсегда?`,bulkPurgeBody:`Выбранные файлы ({{count}}) будут удалены с диска без возможности восстановления.`,cta:`Удалить навсегда`},toast:{restored:`Файл восстановлен.`,restoreFailed:`Не удалось восстановить файл.`,purged:`Файл удалён навсегда.`,purgeFailed:`Не удалось удалить файл.`,emptied:`Из корзины удалено файлов: {{count}}.`,emptyFailed:`Не удалось очистить корзину.`,retentionSaved:`Срок автоудаления: {{days}} дней.`,retentionFailed:`Не удалось сохранить срок хранения.`,bulkRestored:`Восстановлено файлов: {{count}}.`,bulkPurged:`Удалено файлов: {{count}}.`}},libraryPurge:{title:`Очистить старые файлы`,headerButton:`Очистить старые`,headerTooltip:`Массово переместить старые файлы в корзину`,description:`За один проход убирает старые файлы из библиотеки. Для печатавшихся файлов возраст считается от даты последней печати, для ни разу не печатавшихся — от даты загрузки.`,ageLabel:`Переместить файлы старше`,days:`дней`,includeNeverPrinted:`Включить файлы, которые ни разу не печатались`,effectsTitle:`Что произойдёт после нажатия «Очистить»`,effect1:`Подходящие файлы будут перемещены в корзину, но пока не удалены с диска.`,effect2:`Их можно восстановить из корзины до окончания срока хранения.`,effect3:`После окончания срока хранения очистка корзины окончательно удалит их с диска.`,effect4:`Файлы во внешних подключённых папках пропускаются: Bambuddy не удаляет чужие данные.`,previewLoading:`Подсчёт подходящих файлов…`,previewFailed:`Не удалось выполнить предварительный расчёт.`,previewSummary:`В корзину будет перемещено: {{count}} файлов · {{size}}`,andMore:`…и ещё {{count}}`,warning:`Файлы в корзине продолжают занимать место до окончания срока хранения. Чтобы освободить диск сразу, после операции очистите корзину.`,confirmCta:`Переместить в корзину: {{count}}`,purging:`Перемещение в корзину…`,toast:{success:`Перемещено в корзину файлов: {{count}}.`,failed:`Не удалось очистить файлы.`}},libraryAutoPurge:{enableLabel:`Автоматически очищать старые файлы`,enableDescription:`Раз в сутки запускает административную очистку. Сначала файлы попадают в корзину и не удаляются немедленно.`,ageLabel:`Автоматически очищать файлы старше`,ageDescription:`Минимум 7 дней, максимум 10 лет. Используется тот же способ расчёта возраста, что и при ручной очистке.`,days:`дней`,includeNeverPrinted:`Включить файлы, которые ни разу не печатались`,saveFailed:`Не удалось сохранить настройки автоочистки.`},archivePurge:{headerButton:`Очистить старые`,headerTooltip:`Массово удалить старые записи архива`,title:`Очистить старые записи архива`,description:`Удаляет старую историю печати. Возраст записи считается от последнего завершения печати; повторная печать обновляет дату, поэтому используемые записи не удаляются.`,ageLabel:`Удалить записи, которые не печатались последние`,days:`дней`,effectsTitle:`Что произойдёт после нажатия «Очистить»`,effect1:`Каждая подходящая запись будет скрыта из списков, а связанные файлы удалены с диска: 3MF, миниатюра, таймлапс, исходный 3MF, проект F3D и фотографии.`,effect2:`Строка архива останется в базе, поэтому быстрая статистика сохранит вклад по филаменту, времени, стоимости и энергии — как при обычном удалении отдельной записи.`,effect3:`Установите флажок «Также удалить из статистики», чтобы исключить вклад из быстрой статистики. Это действие необратимо.`,effect4:`Повторная печать обновляет дату записи, поэтому используемые архивы не удаляются.`,purgeStatsLabel:`Также удалить из статистики`,purgeStatsHint:`Исключает соответствующие записи из быстрой статистики по филаменту, времени, стоимости и энергии. Без этого удаляются только файлы, а статистика сохраняется.`,previewLoading:`Подсчёт подходящих записей…`,previewFailed:`Не удалось выполнить предварительный расчёт.`,previewSummary:`Будет удалено: {{count}} записей · {{size}}`,andMore:`…и ещё {{count}}`,warning:`Файлы будут удалены с диска без возможности восстановления. Перед продолжением скачайте или добавьте в избранное всё, что нужно сохранить.`,confirmCta:`Удалить записей: {{count}}`,purging:`Удаление…`,toast:{success:`Удалено записей архива: {{count}}.`,failed:`Не удалось очистить архив.`}},archiveAutoPurge:{enableLabel:`Автоматически очищать старые записи архива`,enableDescription:`Раз в сутки скрывает записи из списков и удаляет их файлы с диска, если они не печатались в течение заданного срока. Повторная печать сбрасывает отсчёт.`,ageLabel:`Автоматически удалять записи, которые не печатались последние`,ageDescription:`Минимум 7 дней, максимум 10 лет. Срок считается от последнего завершения печати; повторная печать обновляет дату. Удаляются 3MF, миниатюра, таймлапс, исходный 3MF, F3D и фотографии.`,days:`дней`,purgeStatsLabel:`Также удалить из статистики`,purgeStatsDescription:`Если включено, ежедневная очистка исключает удалённые записи из быстрой статистики по филаменту, времени, стоимости и энергии. По умолчанию выключено: статистика сохраняется, удаляются только файлы.`,runNow:`Очистить архив сейчас`,saveFailed:`Не удалось сохранить настройки автоочистки.`},cameraTokens:{scope:{camera_stream:`Поток камеры`,camwall:`Стена камер`,overlay:`Оверлей для стрима`},title:`Токены API камеры`,navTitle:`Токены API камеры`,description:`Долгоживущие токены для встраивания видеопотока в Home Assistant, Frigate, киоски и другие системы, которым нужен постоянный URL. Каждый токен даёт доступ только к потоку камеры и может быть отозван в любой момент.`,loading:`Загрузка...`,confirmRevoke:{title:`Отозвать этот токен?`,body:`Все устройства, использующие «{{name}}», немедленно потеряют доступ. Отменить это действие нельзя.`,cancel:`Отмена`,confirm:`Отозвать`},create:{scopeLabel:`Область действия`,hintCameraStream:`Токен потока камеры позволяет получать только видеопотоки и снимки. Используйте его для Home Assistant, Frigate и других систем, встраивающих изображение с одной камеры.`,hintCamWall:`Токен стены камер открывает страницу /camwall на экране без авторизации. Он позволяет видеть названия и состояния всех принтеров, а также видеопотоки с их камер. Имена файлов, адреса и коды доступа недоступны.`,hintOverlay:`Токен оверлея для стрима открывает страницу /overlay/{printerId} на экране без авторизации — для OBS или любой прямой трансляции. Он даёт доступ к видеопотоку одного принтера и его текущему статусу печати, включая имя файла, отображаемое на экране. Адреса и коды доступа недоступны.`,title:`Создать токен`,nameLabel:`Название токена`,namePlaceholder:`Например, Home Assistant`,daysLabel:`Срок действия, дней`,submit:`Создать`,hint:`Максимальный срок действия — 365 дней. Значение токена показывается только один раз при создании — скопируйте его сейчас.`},created:{camWallUrlTitle:`URL стены камер для этого экрана`,camWallUrlHint:`Откройте этот адрес на экране. Любой, кто получит URL, сможет наблюдать за стеной камер, поэтому обращайтесь с ним как с ключом. Отзовите токен, чтобы отключить экран.`,overlayUrlTitle:`URL оверлея для OBS`,overlayUrlHint:`Добавьте этот адрес как источник браузера (Browser Source) в OBS. Замените число в /overlay/1 на номер вашего принтера (его можно узнать из URL на странице «Принтеры»). Любой, кто получит URL, сможет смотреть трансляцию, поэтому обращайтесь с ним как с ключом — отзовите токен, чтобы прекратить доступ.`,title:`Токен создан — скопируйте его сейчас`,warning:`Это единственный раз, когда токен отображается. После закрытия окна посмотреть его снова будет невозможно.`,copy:`Копировать`,dismiss:`Я сохранил токен`},list:{scope:`Область действия`,myTitle:`Мои токены`,allTitle:`Все пользователи (режим администратора)`,empty:`Токенов пока нет.`,name:`Название`,owner:`Владелец`,prefix:`Префикс`,created:`Создан`,expires:`Истекает`,lastUsed:`Последнее использование`,revoke:`Отозвать`,expired:`Истёк`},toast:{created:`Токен создан`,createFailed:`Не удалось создать токен`,revoked:`Токен отозван`,revokeFailed:`Не удалось отозвать токен`,loadFailed:`Не удалось загрузить токены`,copied:`Скопировано в буфер обмена`,copyFailed:`Не удалось скопировать — выделите и скопируйте вручную`}},forecast:{title:`Прогноз`,noSpools:`Активные катушки не найдены. Добавьте катушки в учёт, чтобы увидеть прогноз.`,noUsageData:`Нет данных о расходе — невозможно спрогнозировать остатки.`,sku:`Артикул`,material:`Материал`,stock:`Запас`,dailyRate:`Расход`,daysLeft:`Осталось дней`,emptyBy:`Закончится к`,reorderBy:`Заказать до`,actions:`Действия`,trend:`Тренд`,estimated:`Оценка`,noData:`Нет данных`,timeframe:`Период`,chartTitle:`Прогноз запаса — 5 основных материалов`,dashedLinesROP:`Пунктирные линии — точки заказа`,stockLevel:`Уровень запаса`,reorderPoint:`Точка заказа`,safetyMargin:`Страховой запас`,trendLegend:`Тренд (по истории, уровень обслуживания 95%)`,estimatedLegend:`Оценка (по изменению массы)`,noDataLegend:`Нет данных`,ropLabel:`ТЗ`,ssLabel:`СЗ`,safetyStockLegend:`Страховой запас`,stockArrivalLegend:`Поступление`,stockoutLegend:`Исчерпание запаса`,alertCount_one:`{{count}} предупреждение`,alertCount_other:`{{count}} предупреждений`,order:`Заказать`,save:`Сохранить`,cancel:`Отмена`,settingsSaved:`Настройки сохранены`,failedSaveSettings:`Не удалось сохранить настройки`,globalLeadTimeSaved:`Общий срок поставки сохранён`,globalLeadTime:`Общий срок поставки`,globalLeadTimeHint:`Минимальный общий срок поставки, используемый при расчёте точки заказа для всех артикулов`,skuLeadTimeOverride:`Переопределение срока поставки`,skuLeadTimeHint:`0 — использовать общий срок поставки. Значение больше 0 переопределяет его для этого артикула.`,safetyMarginLabel:`Страховой запас`,effectiveLeadTime:`Фактический срок поставки`,effectiveLeadTimeHint:`макс. (общий {{global}} дн., для артикула {{sku}} дн.)`,reorderPointHint:`средний расход × срок поставки + страховой запас — заказывайте, когда остаток достигнет этого уровня`,safetyMarginHint:`Статистический страховой запас (z=1,65 × σ × √LT) плюс заданный пользователем резерв`,safetyMarginHintDays:`Резерв поверх статистического страхового запаса.{{approx}}`,safetyMarginHintDaysApprox:` ≈ {{g}} г при текущем расходе.`,safetyMarginHintG:`Фиксированный весовой резерв поверх статистического страхового запаса.{{approx}}`,safetyMarginHintGApprox:` ≈ {{days}} дн. при текущем расходе.`,individualSpools:`Отдельные катушки`,labelWeight:`Метка`,spoolCount_one:`{{count}} катушка`,spoolCount_other:`{{count}} катушек`,stockBreakRisk:`Риск исчерпания запаса`,stockBreakDetail:`Осталось {{days}} дн., срок поставки {{lt}} дн.`,stockBreakBefore:`Запас закончится до пополнения`,reorderNow:`Заказать сейчас`,reorderTriggerPassed:`Дата заказа {{date}} уже прошла.`,shoppingList:`Список покупок`,shoppingListItems_one:`({{count}} позиция)`,shoppingListItems_other:`({{count}} позиций)`,shoppingListEmpty:`Список покупок пуст. Нажмите значок корзины в нужной строке, чтобы добавить позицию.`,addToCart:`Добавить в список покупок`,alertsSnoozed:`Отключить предупреждения для артикула`,alertsEnabled:`Включить предупреждения для артикула`,addedToCart:`Добавлено в список покупок`,failedAddItem:`Не удалось добавить позицию`,listView:`Список`,logisticsView:`Логистика`,qty:`Кол-во`,weight:`Масса`,leadTime:`Срок поставки`,expectedRestock:`Ожидаемое пополнение`,status:`Состояние`,note:`Примечание`,pending:`Ожидается`,purchased:`Куплено`,received:`Получено`,markPurchased:`Отметить как купленное`,markReceived:`Отметить как полученное — катушки будут добавлены в запас`,resetToPending:`Вернуть в ожидание`,remove:`Удалить`,clearAll:`Очистить всё`,downloadCsv:`CSV`,addToCartTitle:`Добавить в список покупок`,byQuantity:`По количеству`,byDuration:`По сроку`,numberOfSpools:`Количество катушек`,lastHowManyDays:`На сколько дней должно хватить?`,noUsageQty:`Нет данных о расходе — количество установлено равным 1.`,noteOptional:`Примечание (необязательно)`,notePlaceholder:`например, для проекта X, срочно…`,addNSpools_one:`Добавить {{count}} катушку`,addNSpools_other:`Добавить {{count}} катушек`,onArrival:`После поступления`,stockBreakIn:`Запас закончится через {{days}} дн.`,stockRunsOutBefore:`Запас закончится раньше, чем истекут {{lt}} дн. срока поставки.`,atRate:`При расходе {{rate}} г/день требуется`,moreSpools_one:`ещё {{count}} катушка`,moreSpools_other:`ещё {{count}} катушек`,bridgeGap:`чтобы перекрыть дефицит.`,noReadAccess:`У вас нет прав на просмотр прогноза запасов.`,noWriteAccess:`У вас нет прав на изменение настроек прогноза.`}}},uk:{translation:{nav:{printers:`Принтери`,archives:`Архіви`,queue:`Черга друку`,stats:`Статистика`,profiles:`Профілі`,maintenance:`Технічне обслуговування`,projects:`Проєкти`,inventory:`Філамент`,finance:`Фінанси`,files:`Менеджер файлів`,makerworld:`MakerWorld`,notifications:`Сповіщення`,settings:`Налаштування`,system:`Система`,collapseSidebar:`Згорнути бічну панель`,expandSidebar:`Розгорнути бічну панель`,update:`Оновити`,updateAvailable:`Доступне оновлення: v{{version}}`,updateAvailableBanner:`Доступна версія {{version}}!`,viewUpdate:`Переглянути оновлення`,viewOnGithub:`Переглянути на GitHub`,keyboardShortcuts:`Комбінації клавіш (?)`,switchToLight:`Перейти у світлий режим`,switchToDark:`Перейти у темний режим`,switchToSystem:`Перейти в системний режим`,smartSwitches:`Розумні перемикачі`,logout:`Вийти`,installApp:`Встановити додаток`,installAppSuccess:`Bambuddy встановлено`},common:{plusNMore:`ще {{count}}`,save:`Зберегти`,saving:`Збереження...`,cancel:`Скасувати`,delete:`Видалити`,edit:`Редагувати`,add:`Додати`,close:`Закрити`,confirm:`Підтвердити`,loading:`Завантаження...`,error:`Помилка`,errorLoading:`Помилка завантаження даних`,retry:`Повторити`,success:`Успіх`,warning:`Попередження`,enabled:`Увімкнено`,disabled:`Вимкнено`,yes:`Так`,no:`Ні`,on:`Увімкнено`,off:`Вимкнено`,all:`Усі`,none:`Жодного`,search:`Пошук`,filter:`Фільтр`,sort:`Сортувати`,refresh:`Оновити`,download:`Завантажити`,upload:`Вивантажити`,uploading:`Вивантаження...`,uploadFailed:`Не вдалося вивантажити`,actions:`Дії`,status:`Статус`,name:`Назва`,description:`Опис`,date:`Дата`,time:`Час`,hours:`год`,minutes:`хв`,seconds:`с`,days:`дн.`,enable:`Увімкнути`,disable:`Вимкнути`,permissions:`Дозволи`,noPrinters:`Принтери не налаштовані`,noData:`Немає даних`,linkNotFound:`Посилання не знайдено`,required:`Обов’язковий`,optional:`Необов’язково`,dismiss:`Закрити`,apply:`Застосувати`,reset:`Скинути`,export:`Експортувати`,import:`Імпортувати`,clear:`Очистити`,selectAll:`Вибрати всі`,deselectAll:`Зняти вибір із усіх`,noChange:`— Без змін —`,unchanged:`Без змін`,unassigned:`Не призначено`,unknown:`Невідомо`,unknownError:`Невідома помилка`,today:`Сьогодні`,tomorrow:`Завтра`,asap:`Якнайшвидше`,overdue:`Протерміновано`,now:`Зараз`,collapse:`Згорнути`,expand:`Розгорнути`,previous:`Попередній`,next:`Далі`,viewArchive:`Переглянути архів`,viewInFileManager:`Переглянути в менеджері файлів`,addedBy:`Додав {{username}}`,prints:`друків`,more:`+ ще {{count}}`,ascending:`За зростанням`,descending:`За спаданням`,back:`Назад`,copy:`Копіювати`,copied:`Скопійовано!`,printer:`Принтер`,remove:`Видалити`,type:`Тип`,print:`Друкувати`,rename:`Перейменувати`,move:`Перемістити`,create:`Створити`,duplicate:`Дублювати`,left:`Ліворуч`,right:`Праворуч`,user:`Користувач`,run:`Запустити`,running:`Виконується...`},finance:{allTypes:`Усі типи`,allCostCenters:`Усі центри витрат`,title:`Фінанси`,subtitle:`Гаманець, особисті операції та центри витрат`,noAccess:`У вас немає дозволу на перегляд фінансових даних.`,personalView:`Особистий режим`,adminView:`Режим адміністратора`,createCostCenter:`Створити центр витрат`,adjustWallet:`Скоригувати гаманець`,addManualPrint:`Додати ручний друк`,manageMembers:`Керувати учасниками центру витрат`,currentBalance:`Особистий баланс`,transactions:`Операції`,personalTransactions:`Особисті операції`,costCenters:`Центри витрат`,availableForPrinting:`Доступний для призначення друку`,costCenterName:`Назва`,budgetType:`Тип бюджету`,monthlyBudget:`Місячний бюджет`,totalBudget:`Загальний бюджет`,noBudget:`Без бюджету`,create:`Створити`,selectUser:`Виберіть користувача`,transactionType:`Тип`,amount:`Сума`,noCostCenter:`Без центру витрат`,descriptionOptional:`Опис (необов’язково)`,applyAdjustment:`Застосувати коригування`,memberCanPrint:`Учасник може друкувати`,addMember:`Додати учасника`,canPrint:`Може друкувати`,noMembers:`Учасників не призначено.`,editCostCenter:`Редагувати центр витрат`,myCostCenters:`Мої центри витрат`,costCentersHint:`Переглядайте бюджетні ліміти та контролюйте витрати`,noCostCenters:`Центрів витрат не знайдено.`,owner:`Власник`,balance:`Баланс рахунку`,unlimited:`Без обмежень`,budgetPolicyHint:`Баланс рахунку використовується для обліку витрат. Друк обмежується лише бюджетом вибраного центру витрат; без бюджету обмежень немає.`,budget:`Бюджет`,shared:`Спільний`,cannotEditPrivateCostCenter:`Особисті центри витрат не можна редагувати тут`,recentTransactions:`Останні операції`,transactionsHint:`Фільтрувати за типом і центром витрат`,first:`Перша`,prev:`Попередня`,next:`Наступна`,last:`Остання`,pageNumberOf:`Сторінка {{page}} з {{total}}`,noTransactions:`Немає доступних операцій.`,noTransactionsForFilter:`Немає операцій, що відповідають вибраним фільтрам.`,costCenter:`Центр витрат`,balanceAfter:`Баланс після операції`,userWithId:`Користувач №{{id}}`,partial:`Частково`,editTransaction:`Редагувати операцію`,selectCostCenter:`Виберіть центр витрат...`,costCenterRequired:`Виберіть центр витрат`,amountExample:`наприклад, 4,00`,manualAdjustmentExample:`наприклад, ручне коригування`,userRequired:`Виберіть користувача`,amountInvalid:`Сума має бути дійсним числом`,createdCostCenter:`Центр витрат створено`,createCostCenterFailed:`Не вдалося створити центр витрат`,transactionDeleted:`Операцію видалено`,deleteTransactionFailed:`Не вдалося видалити операцію`,transactionEdited:`Операцію оновлено, бухгалтерську книгу перераховано`,editTransactionFailed:`Не вдалося редагувати операцію`,manualPrintCreated:`Витрати на ручний друк додано, бухгалтерську книгу перераховано`,manualPrintFailed:`Не вдалося додати ручний друк`,memberSaved:`Учасника збережено`,memberSaveFailed:`Не вдалося зберегти учасника`,memberRemoved:`Учасника видалено`,memberRemoveFailed:`Не вдалося видалити учасника`,costCenterNameRequired:`Назва центру витрат є обов’язковою`,costCenterUpdated:`Центр витрат оновлено`,costCenterUpdateFailed:`Не вдалося оновити центр витрат`,confirmDeleteCostCenter:`Видалити центр витрат «{{name}}»?`,costCenterDeleted:`Центр витрат видалено`,costCenterDeleteFailed:`Не вдалося видалити центр витрат`,deleteTransactionConfirm:`Видалити цю операцію? Баланси буде перераховано автоматично.`,deposit:`Поповнення`,withdraw:`Списання`,printCharge:`Витрати на друк`,deleteTransaction:`Видалити операцію`},printers:{title:`Принтери`,addPrinter:`Додати принтер`,addPreflight:{checking:`Перевірка підключення...`,warning:`Деякі перевірки підключення завершилися невдало. Принтер може відображатися як офлайн. Перегляньте результати нижче, усуньте можливі проблеми або все одно збережіть принтер.`,back:`Назад`,saveAnyway:`Усе одно зберегти`},editPrinter:`Редагувати принтер`,deletePrinter:`Видалити принтер`,printerName:`Назва принтера`,serialNumber:`Серійний номер`,ipAddress:`IP-адреса / ім’я хоста`,accessCode:`Код доступу`,model:`Модель`,nozzleCount:`Кількість сопел`,autoArchive:`Автоархів`,status:{available:`Доступний`,idle:`Неактивний`,printing:`Друк`,paused:`Призупинено`,offline:`Не в мережі`,problem:`Проблема`,error:`Помилка`,finished:`Готово`,unknown:`Невідомий`},temperatures:{nozzle:`Сопло`,bed:`Стіл`,chamber:`Камера`},heaterHistory:{title:`Історія нагрівання`,openLabel:`Переглянути історію нагрівання`,nozzle:`Сопло`,nozzle2:`Сопло 2`,bed:`Стіл`,chamber:`Камера`,error:`Не вдалося завантажити історію`,empty:`Дані ще не записані`},progress:`{{percent}}% виконано`,timeRemaining:`Залишилося {{time}}`,deleteConfirm:`Ви впевнені, що хочете видалити "{{name}}"?`,maintenanceOk:`Технічне обслуговування в порядку`,maintenanceWarning:`{{count}} попередження`,maintenanceWarning_plural:`{{count}} попередження`,maintenanceDue:`Потрібне обслуговування: {{count}}`,maintenanceDue_plural:`Потрібне обслуговування: {{count}}`,sort:{name:`Назва`,status:`Статус`,model:`Модель`,location:`Розташування`,eta:`Орієнтовне завершення`,ascending:`Сортувати за зростанням`,descending:`Сортувати за спаданням`},cardSize:{small:`Маленькі картки`,medium:`Середні картки`,large:`Великі картки`,extraLarge:`Дуже великі картки`},pageView:{openCamWallPage:`Відкрити панель камер як окрему сторінку`,cards:`Картки`,camWall:`Панель камер`},camWall:{page:{tokenRejected:`Це посилання на панель камер більше не дійсне. Можливо, термін дії токена минув або токен було відкликано.`,loadFailed:`Не вдалося завантажити список принтерів.`},noPrinters:`Немає принтерів для показу`,noSignal:`Немає сигналу`,live:`Наживо`,snap:`Знімок`,off:`Вимкнено`,summary:`{{live}} наживо, {{snap}} знімки, {{total}} всього`,layer:`Шар {{cur}}/{{total}}`,timeLeft:`Залишилося {{time}}`,statusMode:{off:`Вимкнено`,compact:`Компактний`,full:`Повний`},settings:{title:`Налаштування Cam Wall`,maxLive:`Максимальна кількість прямих трансляцій`,maxLiveHint:`Кількість плиток, що одночасно показують пряму трансляцію. Решта оновлюються як знімки.`,snapshotInterval:`Інтервал знімка (секунди)`,snapshotIntervalHint:`Як часто плитки без прямої трансляції отримують новий знімок.`,statusOverlay:`Накладення стану`,statusOverlayHint:`Компактний: лише значок стану. Повний: значок, прогрес, шар і час, що залишився.`}},hideOffline:`Приховати офлайн-принтери`,nextAvailable:`Наступний доступний`,powerOn:`Увімкнути`,offlinePrintersWithPlugs:`Офлайн-принтери з розумними розетками`,noPrintersConfigured:`Принтерів ще не налаштовано`,search:`Пошук принтерів...`,noSearchResults:`Немає принтерів, які відповідають вашому пошуку або фільтрам`,filter:{allStatuses:`Усі статуси`,allLocations:`Усі розташування`},toolbar:{filters:`Фільтри`,view:`Вигляд`,actions:`Дії`},readyToPrint:`Готовий до друку`,external:`Зовнішній`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Видалити архіви друку`,noLabel:`Без етикетки`,printPreview:`Попередній перегляд`,width:`Ширина`,height:`Висота`,noObjectsFound:`Об’єктів не знайдено`,objectsLoadedOnPrintStart:`Об’єкти завантажуються після початку друку`,willBeSkipped:`Буде пропущено`,name:`Назва`,serialCannotBeChanged:`Серійний номер не можна змінити`,locationHelp:`Використовується для групування принтерів і фільтрації завдань у черзі`,wifiSignal:{veryWeak:`Дуже слабкий`,weak:`Слабкий`,fair:`Задовільний`,good:`Добрий`,excellent:`Чудово`},maintenanceUpToDate:`Усі роботи з технічного обслуговування виконано — натисніть, щоб переглянути`,maintenance:{title:`На технічному обслуговуванні`,subtitle:`Роботу цього принтера призупинено: він не підключається, не отримує завдань із черги й не надсилає сповіщень.`,pillLabel:`Технічне обслуговування`,exitButton:`Вийти з технічного обслуговування`,menuEnter:`Увійти в режим обслуговування`,menuExit:`Вийти з режиму обслуговування`,toastEntered:`{{name}} зараз у режимі обслуговування`,toastExited:`{{name}} знову в мережі`,confirmMidPrintTitle:`Перевести принтер у режим обслуговування під час друку?`,confirmMidPrintMessage:`{{name}} зараз друкує. Перехід у режим обслуговування відключить MQTT і припинить відстеження перебігу друку та сповіщення про завершення цього завдання. Продовжити?`,editFieldLabel:`Режим обслуговування`,editFieldHelp:`Коли режим увімкнено, принтер відключається від MQTT, не отримує завдань із черги й не надсилає сповіщень. Використовуйте цей режим під час ремонту, паралельного розгортання Bambuddy або тимчасового виведення принтера з роботи.`},chamberLightOn:`Увімкнути світло в камері`,chamberLightOff:`Вимкнути світло в камері`,files:`Файли`,browseFiles:`Переглянути файли принтера`,autoOffAfterPrint:`Автоматичне вимкнення після друку`,autoOffExecuted:`Автоматичне вимкнення виконано — увімкніть принтер, щоб скинути стан`,hmsErrors:`Помилки HMS`,viewHmsErrors:`Переглянути помилки HMS ({{count}})`,resume:`Відновити`,pause:`Призупинити`,stop:`Зупинити`,camera:`Камера`,skipObject:`Пропустити об’єкт`,reconnect:`Підключитися знову`,forceRefresh:`Примусово оновити`,forceRefreshSuccess:`Оновлення запитано`,mqttDebug:`Налагодження MQTT`,printerInformation:`Інформація про принтер`,copyToClipboard:`Копіювати`,copied:`Скопійовано!`,state:`Стан`,wifiSignalLabel:`Сигнал Wi‑Fi`,developerMode:`Режим розробника`,enabled:`Увімкнено`,disabled:`Вимкнено`,addedOn:`Додано`,sdCard:`SD-картка`,inserted:`Вставлено`,notInserted:`Не вставлено`,totalPrintHours:`Загальний час друку`,activeNozzle:`Активне сопло: {{nozzle}}`,amsSwitchInletTooltip:`Перемикач тракту філаменту IN-{{inlet}} ({{side}}) — подає на обидва сопла`,nozzleRack:`Стійка сопел`,nozzleDocked:`У док-станції`,nozzleMounted:`Установлено`,nozzleActive:`Активний`,nozzleIdle:`Неактивний`,nozzleDiameter:`Діаметр`,nozzleType:`Тип`,nozzleStatus:`Статус`,nozzleFilament:`Філамент`,nozzleWear:`Знос`,nozzleMaxTemp:`Макс. температура`,nozzleSerial:`Серійний номер`,nozzleHardenedSteel:`Загартована сталь`,nozzleStainlessSteel:`Нержавіюча сталь`,nozzleTungstenCarbide:`Карбід вольфраму`,nozzleFlow:`Потік`,nozzleHighFlow:`Високий потік`,nozzleStandardFlow:`Стандартний`,firmwareUpdate:`Оновлення прошивки`,firmwareInstructions:`На сенсорному екрані принтера перейдіть до`,firmwareNav:`Перейдіть до`,settings:`Налаштування`,firmware:`Прошивка`,discoverPrinters:`Знайти принтери`,searching:`Пошук...`,manualEntry:`Ввести вручну`,addFromCloud:`Додати з хмари`,toast:{printerDeleted:`Принтер видалено`,missingSpoolAssignment:`Друк на {{printer}} розпочато. Для слотів {{slots}} не призначено котушки.`,killSwitchTriggered:`Аварійний вимикач білінгу зупинив несанкціонований друк на {{printer}}: {{filename}}`,billingChargeFailed:`Не вдалося нарахувати вартість {{filename}} на {{printer}}. Резерв бюджету збережено; перевірте журнали сервера.`,assignmentVerified:`Філамент завантажено в слот AMS {{slot}} принтера {{printer}}`,assignmentVerifiedNoKprofile:`Слот AMS {{slot}} на {{printer}} завантажено, але калібрування потоку (K-профіль) не застосовано`,assignmentNotConfirmed:`Не вдалося підтвердити призначення для слота {{slot}} на {{printer}} — перевірте слот AMS`,printerAdded:`Додано принтер`,printerUpdated:`Принтер оновлено`,failedToDelete:`Не вдалося видалити принтер`,failedToAdd:`Не вдалося додати принтер`,connectionFailedNotAdded:`Не вдалося підключитися до принтера. Перевірте IP, серійний номер і код доступу, а також підтвердьте, що режим лише для LAN увімкнено. Принтер не додано.`,failedToUpdate:`Не вдалося оновити принтер`,commandSent:`Команда надіслана`,failedToSendCommand:`Не вдалося надіслати команду`,turnedOn:`{{name}} увімкнено`,failedToPowerOn:`Не вдалося ввімкнути {{name}}`,scriptTriggered:`Сценарій запущено`,printStopped:`Друк зупинено`,printPaused:`Друк призупинено`,printResumed:`Друк відновлено`,referenceDeleted:`Еталонне зображення видалено`,detectionAreaSaved:`Область виявлення збережено`,failedToRunScript:`Не вдалося запустити сценарій`,failedToStopPrint:`Не вдалося зупинити друк`,failedToPausePrint:`Не вдалося призупинити друк`,failedToResumePrint:`Не вдалося відновити друк`,failedToControlChamberLight:`Не вдалося керувати світлом камери`,failedToSetSpeed:`Не вдалося встановити швидкість друку`,failedToUpdateSetting:`Не вдалося оновити налаштування`,failedToSkipObjects:`Не вдалося пропустити об’єкти`,failedToRereadRfid:`Не вдалося перечитати RFID`,failedToCheckPlate:`Не вдалося перевірити друкарську пластину`,failedToUpdateLabel:`Не вдалося оновити мітку`,failedToDeleteReference:`Не вдалося видалити еталонне зображення`,failedToSaveDetectionArea:`Не вдалося зберегти область виявлення`,plateCheckEnabled:`Перевірку друкарської пластини ввімкнено`,plateCheckDisabled:`Перевірку друкарської пластини вимкнено`,calibrationSaved:`Калібрування збережено!`,calibrationFailed:`Не вдалося виконати калібрування`,rfidRereadInitiated:`Розпочато повторне зчитування RFID`,loadInitiated:`Завантаження філаменту...`,unloadInitiated:`Вивантаження філаменту...`,failedToLoad:`Не вдалося завантажити філамент`,failedToUnload:`Не вдалося вивантажити філамент`},connection:{connected:`Підключено`,offline:`Не в мережі`},plateStatus:{markCleared:`Позначити друкарську пластину як очищену`,cleared:`Друкарську пластину очищено`,notCleared:`Друкарську пластину не очищено`,inUse:`Друкарська пластина використовується`},queue:{inQueue:`У черзі: {{count}}`,inQueue_plural:`У черзі: {{count}}`},controls:`Елементи керування`,rfid:{reread:`Перечитати RFID`},ams:{load:`Завантажити`,unload:`Вивантажити`,feedTitle:`У яке сопло завантажити {{slot}}?`,feedPrompt:`Filament Track Switch може спрямувати цей слот до будь-якого з хотендів. Виберіть, у який подавати.`,feedLeft:`Ліве сопло`,feedRight:`Праве сопло`,feedAlreadyLoaded:`Уже завантажено`,switchNotReady:`Filament Track Switch ще не налаштовано. Призначте кожній AMS вхід на принтері й спробуйте ще раз.`},bedJog:{limitWarning:`Під час ручного переміщення межі ходу не контролюються: через помилку прошивки Bambu віддалені команди ігнорують програмні кінцеві обмежувачі. Переміщуйте стіл обережно, щоб уникнути зіткнення.`,title:`Керування переміщенням`,bed:`Стіл`,step:`Крок (мм)`,up:`Перемістити стіл угору`,down:`Перемістити стіл униз`,toolheadUp:`Перемістити друкувальну голову вгору`,toolheadDown:`Перемістити друкувальну голову вниз`,disabledWhilePrinting:`Вимкнено під час друку`,notHomedTitle:`Принтер не відкалібровано за початковою позицією`,notHomedMessage:`Після останнього друку принтер не виконував пошук початкової позиції. Для безпечного позиціювання спочатку запустіть автопозиціювання: принтер припаркує друкувальну головку та визначить початкові координати X, Y і Z. Або продовжте переміщення без нього — програмні кінцеві обмежувачі буде обійдено.`,homeZ:`Запустити автопозиціювання`,moveAnyway:`Усе одно перемістити`,homingStarted:`Виконується автопозиціювання принтера…`},permission:{noAdd:`Ви не маєте дозволу додавати принтери`,noEdit:`Ви не маєте дозволу редагувати принтери`,noDelete:`Ви не маєте дозволу на видалення принтерів`,noControl:`Ви не маєте дозволу керувати принтерами`,noFiles:`Ви не маєте дозволу на доступ до файлів принтера`,noAmsRfid:`Ви не маєте дозволу на повторне читання AMS RFID`,noSmartPlugControl:`Ви не маєте дозволу керувати розумними розетками`,noCamera:`У вас немає дозволу на перегляд камер`},modal:{addTitle:`Додати принтер`,editTitle:`Редагувати принтер`,myPrinter:`Мій принтер`,selectModel:`Вибрати модель…`,locationGroup:`Розташування/група (необов’язково)`,locationPlaceholder:`наприклад, майстерня, офіс, підвал`,autoArchiveLabel:`Автоматичне архівування завершених роздруківок`,fromPrinterSettings:`З налаштувань принтера`,modelOptional:`Модель (необов’язково)`,saveChanges:`Зберегти зміни`},skipObjects:{tooltip:`Пропустити об’єкти`,onlyWhilePrinting:`Пропустити об’єкти (лише під час друку)`,requiresMultiple:`Пропустити об’єкти (потрібно щонайменше 2 об’єкти)`,title:`Пропустити об’єкти`,matchIdsInfo:`Зіставте ідентифікатори з дисплеєм принтера`,printerShowsIds:`На екрані принтера показано ідентифікатори об’єктів на друкарській пластині`,skipSelected:`Пропустити вибране`,skipping:`Пропускання…`,noObjectsSelected:`Об’єкти не вибрано`,selectObjectsToSkip:`Виберіть об’єкти, які потрібно пропустити під час поточного друку`,skipped:`пропущено`,objectsSkipped:`Об’єкти пропущено`,activeCount:`Активних: {{count}}`,waitForLayer:`Щоб пропускати об’єкти, дочекайтеся другого шару або пізніше (зараз шар {{layer}})`,skip:`Пропустити`,confirmTitle:`Пропустити об’єкт?`,confirmMessage:`Ви впевнені, що бажаєте пропустити "{{name}}"? Це неможливо скасувати.`,confirmAllMessage:`Вибрано всі об’єкти, що залишилися. Це зупинить завдання друку. Продовжити?`,confirmMultipleMessage:`Пропустити вибрані об’єкти ({{count}})? Цю дію неможливо скасувати.`},confirm:{deleteTitle:`Видалити принтер`,deleteMessage:`Ви впевнені, що хочете видалити "{{name}}"? Це призведе до видалення всіх налаштувань підключення.`,deleteArchivesNote:`Усю історію друку для цього принтера буде остаточно видалено.`,keepArchivesNote:`Історія друку буде збережена, але більше не пов’язана з цим принтером.`,stopTitle:`Зупинити друк`,stopMessage:`Ви впевнені, що хочете зупинити поточний друк на "{{name}}"? Це призведе до скасування завдання друку.`,stopButton:`Зупинити друк`,pauseTitle:`Призупинити друк`,pauseMessage:`Ви впевнені, що хочете призупинити поточний друк на "{{name}}"?`,pauseButton:`Призупинити друк`,resumeTitle:`Відновити друк`,resumeMessage:`Ви впевнені, що бажаєте відновити друк на "{{name}}"?`,resumeButton:`Відновити друк`,powerOnTitle:`Увімкнути принтер`,powerOnMessage:`Увімкнути живлення принтера «{{name}}»?`,powerOnButton:`Увімкнути`,powerOffTitle:`Вимкнути принтер`,powerOffMessage:`Вимкнути живлення принтера «{{name}}»?`,powerOffWarning:`УВАГА: «{{name}}» зараз друкує. Вимкнення живлення перерве друк і може пошкодити принтер. Продовжити?`,powerOffButton:`Вимкнути`,haToggleTitle:`Перемкнути "{{name}}"`,haToggleMessage:`Перемкнути об’єкт Home Assistant {{entity}}? Це може вимкнути живлення, якщо воно зараз увімкнено.`,haToggleWarning:`УВАГА: "{{name}}" зараз друкується! Перемикання {{entity}} може вимкнути живлення та перервати друк. Продовжити?`,haToggleButton:`Перемкнути`},bulk:{select:`Вибрати`,selectAll:`Вибрати усі`,selectByLocation:`Вибрати за розташуванням`,selected:`Вибрано: {{count}}`,actions:{stop:`Зупинити`,pause:`Призупинити`,resume:`Відновити`,clearPlate:`Очистити стіл`,clearHMS:`Очистити сповіщення`},confirm:{stopTitle:`Зупинити завдання друку: {{count}}`,stopMessage:`Активний друк буде скасовано на вибраних принтерах ({{count}}). Цю дію неможливо скасувати.`,stopButton:`Зупинити все`,pauseTitle:`Призупинити завдання друку: {{count}}`,pauseMessage:`Активний друк буде призупинено на вибраних принтерах ({{count}}).`,pauseButton:`Призупинити все`,clearPlateTitle:`Очистити столи ({{count}})`,clearPlateMessage:`Столи вибраних принтерів ({{count}}) буде позначено очищеними, що може запустити завдання з черги.`,clearPlateButton:`Очистити все`},success:`Дію «{{action}}» виконано на принтерах: {{count}}`,partial:`{{succeeded}} вдалося, {{failed}} не вдалося`,noneApplicable:`Немає вибраних принтерів у належному стані для цієї дії`,selectByState:`Вибрати за станом`},discovery:{title:`Знайти принтери`,searching:`Пошук...`,scanning:`Сканування...`,scanProgress:`Сканування... {{scanned}}/{{total}}`,foundPrinters:`Знайдено принтерів: {{count}}`,noPrintersFound:`Принтерів не знайдено`,noPrintersFoundSubnet:`Немає принтерів у вказаній підмережі.`,noPrintersFoundNetwork:`У мережі не знайдено принтерів.`,allConfigured:`Усі знайдені принтери вже налаштовані.`,alreadyAdded:`Вже додано`,select:`Вибрати`,manualEntry:`Ввести вручну`,addFromCloud:`Додати з хмари`,subnetToScan:`Підмережа для сканування`,dockerNote:`Виявлено Docker. Введіть підмережу принтера в нотації CIDR. У docker-compose.yml потрібен параметр network_mode: host.`,scanSubnet:`Сканувати підмережу для принтерів`,discoverNetwork:`Знайти принтери в мережі`,scanningSubnet:`Сканування підмережі для принтерів Bambu...`,scanningNetwork:`Сканування мережі...`,serialRequired:`Потрібен серійний номер`,unknown:`Невідомий`,failedToStart:`Не вдалося запустити пошук`,customSubnetOption:`Спеціальна підмережа...`,customSubnetLabel:`Спеціальна підмережа (CIDR)`,customSubnetNote:`Укажіть власну підмережу, якщо принтер перебуває в іншій мережі, ніж сервер. Порти FTP (990) і MQTT (8883) мають бути доступні через маршрутизатор.`},drying:{start:`Почати сушіння`,stop:`Зупинити сушіння`,temperature:`Температура`,duration:`Тривалість`,hours:`години`,timeRemaining:`Залишилося {{time}}`,active:`Сушіння`,targetSummary:`{{filament}} при {{temp}}°C`,notSupported:`Сушіння не підтримується`,powerRequired:`Підключіть адаптер живлення AMS, щоб увімкнути сушіння`,cannotDryNow:`AMS зараз не може почати сушіння`,startingDrying:`Запуск сушіння…`,toastCommandSent:`Надіслано команду сушіння`,toastStopped:`Сушіння зупинено`,toastNotStarted:`Принтер прийняв команду, але AMS так і не почав сушити. Перевірте, чи підключено адаптер живлення AMS і чи принтер неактивний.`,screenOnly:`Сушінням AMS на цьому принтері можна керувати лише з екрана принтера (обмеження Bambu)`,stoppingDrying:`Припинення сушіння...`,rotateTray:`Обертати котушку під час сушіння`,rotateUnavailableReason:`Недоступно: філамент із цього слота AMS завантажено в інструментальну головку. Котушка заблокована подавальною трубкою й не може обертатися. Спочатку вивантажте філамент.`,startMode:`Час початку`,modeNow:`Зараз`,modeDelay:`Після затримки`,modeAtTime:`За часом`,schedule:`Запланувати`,scheduledFor:`Сушіння заплановано на {{time}}`,scheduledAsap:`Сушіння заплановано (очікування принтера)`,cancelScheduled:`Скасувати заплановане сушіння`,scheduleFailed:`Не вдалося запланувати сушіння`,retractFilament:`Витягніть філамент із виходу AMS, щоб почати сушіння`,waitingAmsNotFound:`Очікування виявлення AMS`,waitingOffline:`Очікування підключення принтера`,waitingPrinterBusy:`Очікування звільнення принтера`,waitingAlreadyDrying:`Очікування завершення поточного циклу сушіння`,waitingInterrupted:`Перервано, відновиться, коли принтер звільниться`,scheduleFailedReason:`Не вдалося виконати заплановане сушіння: {{reason}}`,scheduleFailedUnknown:`Невідома помилка`,dismissFailed:`Сховати`},amsBackup:{titleOn:`Резервне перемикання філаменту AMS увімкнено. Натисніть, щоб вимкнути.`,titleOff:`Резервне перемикання філаменту AMS вимкнено. Натисніть, щоб увімкнути.`,titleUnknown:`Стан резервної котушки AMS недоступний на цьому принтері.`,toastEnabled:`Резервну котушку AMS ввімкнено`,toastDisabled:`Резервну котушку AMS вимкнено`,modalTitle:`Резервне перемикання філаменту AMS`,modalHelp:`Коли філамент в активному слоті закінчується, принтер по черзі перемикається на слоти з таким самим профілем і кольором у вказаному порядку.`,modalNoSlots:`Філамент не завантажено.`,modalNoPairs:`Немає резервних пар — немає двох слотів з однаковим профілем і кольором філаменту.`,extruderRightShort:`Р`,extruderLeftShort:`Л`,stateOn:`Увімкнено`,stateOff:`Вимкнено`,stateUnknown:`Не підтримується на цьому принтері`},activeJobSlot:{title:`Цей слот відповідає філаменту {{n}} в поточному завданні друку`,ariaLabel:`Слот {{n}} поточного завдання друку`},expectedSlot:{title:`Принтер очікує філамент у цьому слоті`,ariaLabel:`Очікуваний слот для філаменту {{n}}`,label:`{{ams}} · Слот {{slot}}`,external:`Зовнішня котушка`},filaments:`Філаменти`,externalSpool:{hide:`Сховати зовнішню котушку`,show:`Показати зовнішню котушку`},openCameraOverlay:`Відкрити накладання камери`,openCameraWindow:`Відкрити камеру в новому вікні`,firmwareUpdateAvailable:`Доступне оновлення прошивки: {{current}} → {{latest}}`,firmwareUpToDate:`Прошивка {{version}} актуальна`,firmwareUpdateButton:`Оновити`,plateDetection:{noPermission:`Ви не маєте дозволу на оновлення принтерів`,enabledClick:`Перевірку друкарської пластини ввімкнено — натисніть, щоб вимкнути`,disabledClick:`Перевірку друкарської пластини вимкнено — натисніть, щоб увімкнути`,manageCalibration:`Керувати калібруванням перевірки пластини`,calibrationRequired:`Потрібне калібрування`,calibrationInstructions:`Переконайтеся, що робоча пластина <strong>повністю порожня</strong>, а потім натисніть «Калібрувати».`,calibrationDescription:`Під час калібрування створюється еталонне зображення порожньої пластини. Наступні перевірки порівнюватимуть з ним зображення, щоб виявляти об’єкти.`,calibrationTip:`<strong>Порада:</strong> Ви можете зберегти до 5 калібрувань для різних пластин. Під час перевірки система автоматично використовує найкращий збіг.`,plateEmpty:`Друкарська пластина виглядає порожньою`,objectsDetected:`На пластині виявлено об’єкти`,confidence:`Впевненість`,difference:`Різниця`,analysisPreview:`Попередній перегляд аналізу:`,analysisLegend:`Зелена рамка = зона виявлення, червона накладка = відмінності від калібрування`,savedReferences:`Збережені еталонні зображення ({{count}}/{{max}})`,deleteReference:`Видалити еталонне зображення`,labelPlaceholder:`Мітка...`,clickToEdit:`{{label}} - Натисніть, щоб редагувати`,clickToAddLabel:`Натисніть, щоб додати мітку`},speed:{title:`Швидкість друку`,silent:`Тихий (50%)`,standard:`Стандарт (100%)`,sport:`Sport (124%)`,ludicrous:`Ludicrous (166%)`},airduct:{title:`Режим повітропроводу`,cooling:`Охолодження`,heating:`Опалення`},noSdCard:`Немає SD-картки`,door:{open:`Відчинено`,closed:`Закрито`},fans:{partCooling:`Вентилятор охолодження моделі`,auxiliary:`Допоміжний вентилятор`,leftAuxiliary:`Лівий допоміжний вентилятор`,exhaust:`Витяжка`,chamber:`Камерний вентилятор`},clickToViewHmsErrors:`Натисніть, щоб переглянути помилки HMS`,aiDetection:{safe:`Безпечно`,warning:`Попередження`,failure:`Помилка`,idle:`Очікування`,error:`Не перевіряє`,unknown:`Запуск`,tooltipError:`Виявлення помилок за допомогою ШІ не перевіряє цей друк: {{reason}} — натисніть, щоб переглянути деталі`,tooltipUnknown:`Виявлення помилок за допомогою ШІ: очікування першого результату — натисніть, щоб переглянути деталі`,errorHint:`Цей друк не перевіряється. Виявлення відновиться автоматично після усунення проблеми, наведеної нижче.`,tooltip:`Виявлення помилок за допомогою ШІ: {{status}} (оцінка {{score}}) — натисніть, щоб переглянути деталі`,tooltipIdle:`Виявлення помилок за допомогою ШІ ввімкнено — моніторинг почнеться з наступним друком — натисніть, щоб переглянути деталі`,modalTitle:`Виявлення помилок за допомогою ШІ — {{name}}`,currentStatus:`Стан`,score:`Оцінка`,framesAnalyzed:`Проаналізовано кадрів`,idleHint:`Зараз жоден друк не відстежується. Моніторинг автоматично почнеться з наступним друком.`,lastError:`Остання помилка`,openSettings:`Відкрити налаштування`},estimatedCompletion:`Орієнтовний час виконання`,plateNumber:`Пластина {{number}}`,slotOptions:`Опції слота`,amsPopup:{friendlyName:`Назва AMS`,friendlyNamePlaceholder:`наприклад, Основна AMS`,serialNumber:`Серійний номер`,firmwareVersion:`Прошивка`,save:`Зберегти`,clear:`Очистити`,noEditPermission:`Ви не маєте дозволу на перейменування одиниць AMS.`},firmwareModal:{title:`Оновлення прошивки`,titleUpToDate:`Інформація про прошивку`,currentVersion:`Поточна:`,latestVersion:`Найновіша:`,releaseNotes:`Примітки до випуску`,checkingPrereqs:`Перевірка передумов...`,sdCardReady:`SD-картка готова. Натисніть нижче, щоб вивантажити на неї прошивку.`,uploadedSuccess:`Прошивку вивантажено на картку SD!`,applyInstructions:`Щоб застосувати оновлення до свого принтера:`,step1:`На сенсорному екрані принтера перейдіть до <strong>Налаштування</strong>`,step2:`Перейдіть до розділу <strong>Прошивка</strong>`,step3:`Виберіть <strong>Оновити з SD-картки</strong>`,step4:`Оновлення займе 10-20 хвилин`,done:`Готово`,starting:`Запуск…`,uploadFirmware:`Вивантажити прошивку`,uploadFailed:`Не вдалося почати вивантаження: {{error}}`,uploadedToast:`Прошивку вивантажено! Запустіть оновлення з екрана принтера.`,availableVersions:`Доступні версії`,usable:`Можна використовувати`,unavailable:`Недоступна`,installed:`Установлена`,newerBadge:`новіший`,olderBadge:`старіша`,currentBadge:`поточна`},accessCodePlaceholder:`Залиште порожнім, щоб не змінювати`,roi:{title:`Область виявлення (ROI)`,xStart:`Початок X`,yStart:`Початок Y`,width:`Ширина`,height:`Висота`,instruction:`Відрегулюйте область виявлення, щоб сфокусуватися на робочій пластині. Зелене поле в попередньому перегляді показує поточну область.`},developerModeWarning:`Режим розробника LAN не ввімкнено на: {{names}}. Деякі функції можуть не працювати.`,howToEnable:`Як увімкнути`,incompatibleFile:`Цей файл нарізано для {{slicedFor}}, а модель цього принтера — {{printerModel}}`,dropNotPrintable:`Можна роздрукувати лише файли .gcode і .gcode.3mf.`,dropToPrint:`Відпустіть для друку`,dropToQueue:`Відпустіть, щоб додати в чергу`},archives:{media:{title:`Відео друку`,download:`Завантажити відео друку`,searching:`Пошук відео на принтері…`,searchFailed:`Не вдалося перевірити відео на принтері.`,none:`Для цього друку не знайдено таймлапсів або фрагментів IP-камери.`,attachedTimelapse:`Прикріплений таймлапс`,printerFiles:`Файли, що залишилися на принтері`,downloadSelected:`Завантажити вибране`,printerMissing:`Принтер більше не налаштовано`,timelapseUnavailable:`Не вдалося прочитати каталог таймлапсів`,ipcamUnavailable:`Не вдалося прочитати каталог IP-камери`},title:`Архіви друку`,no3mfBanner:{title:`Деякі нещодавні роздруківки не вдалося заархівувати з мініатюрами`,body:`Слайсер не залишив файл .gcode.3mf на SD-картці принтера, тому Bambuddy не зміг отримати мініатюру або метадані слайсера. Зазвичай це стається, коли в слайсері вимкнено параметр «Зберігати надіслані файли на зовнішньому накопичувачі» (вкладка «Пристрій» у Bambu Studio або OrcaSlicer).`,docsLink:`Переглянути крок 4 встановлення`,docsLinkInternalStorage:`Чому так стається`,titleInternalStorage:`Деякі нещодавні друки залишилися у внутрішній пам'яті принтера`,bodyInternalStorage:`Bambu Studio зберіг нарізаний файл у внутрішній пам'яті принтера, а не на картці, тож Bambuddy не мав чого читати через FTP. На серії H2, P2S та X2D кнопка «Друк» завжди робить саме так: вибір є лише в «Надіслати», і там за замовчуванням теж «Кеш». Ці друки й далі архівуються з назвою та часом, лише без мініатюри та метаданих слайсера. Щоб архіви були повними, запускайте друк із Bambuddy або нарізайте в OrcaSlicer, або в Bambu Studio скористайтеся «Надіслати» із «Зовнішнім носієм», а друк запускайте потім. Усі варіанти потребують картки або флешки в принтері.`,titleNoExternalStorage:`Деякі нещодавні друки не вдалося заархівувати — у принтері немає носія`,bodyNoExternalStorage:`Принтер не бачить ані картки, ані флешки у слоті, тож нарізаному файлу не було куди потрапити, а Bambuddy — що читати. Вставте носій, і наступний друк заархівується повністю.`,titleInternalHistory:`Деякі нещодавні друки запущено з файлу, який уже був на принтері`,bodyInternalHistory:`Ці друки йшли з власної бібліотеки принтера — повторний друк з його екрана, запуск із Handy або файл, надісланий раніше й надрукований пізніше. Bambuddy читає файли друку через FTP, а той віддає лише картку чи флешку, тоді як принтер тримає цю бібліотеку в області, куди FTP не дістає, — читати 3MF не було де. Налаштування слайсера тут нічого не змінюють: для цих друків нічого не надсилалося. Вони й далі архівуються з назвою та часом, а в «Редагувати архів» витрачений філамент можна вписати вручну. Щоб архів був повним, запускайте друк із Bambuddy або зі свого слайсера.`,titleFtpsCooloff:`Деякі нещодавні друки не вдалося заархівувати — принтер відхилив файлове з'єднання`,bodyFtpsCooloff:`Bambuddy відкрив порт передавання файлів принтера (FTPS 990), і принтер відповів чимось, що не є TLS, тож прочитати з нього нічого не вдалося. Ці друки все одно збережені в архіві з назвою та часом, лише без мініатюри й метаданих слайсера. Це не налаштування слайсера і не те, що ви змінювали: ті самі моделі та прошивки нормально працюють на інших встановленнях, а уражений принтер зазвичай згодом починає працювати сам. Після такої помилки Bambuddy призупиняє передавання до цього принтера на п'ять хвилин і повертається по файл, коли пауза завершується, тож короткий епізод виправляється сам; якщо картка й далі порожня, відмова тривала довше за повторну спробу. Що саме це спричиняє, поки невідомо. Якщо повторюється, увімкніть налагоджувальне журналювання на сторінці Система та додайте пакет підтримки до свого звіту.`,titleFtpTransferFailed:`Деякі нещодавні друки не вдалося заархівувати — передавання файлу не вклалося в час`,bodyFtpTransferFailed:`Нарізаний файл лежав на картці принтера, і принтер справді його віддавав, але передавання не завершилося у відведений час. На старті друку принтер одночасно обслуговує камеру, повідомлення про стан і завантаження завдання, і великий 3MF не завжди встигає пройти на цьому тлі. Ці друки й далі заархівовані з назвою та часом, лише без мініатюри та даних слайсера. Це не налаштування слайсера і не наслідок ваших змін. Bambuddy повертається по файл ще тричі протягом наступних десяти хвилин, тож більшість таких випадків закриваються самі; якщо картка так і лишилася порожньою, то й усі ці спроби не вклалися в час. Якщо це повторюється, збільште Тайм-аут підключення в розділі Налаштування > Мережа > Повтор FTP.`,dismissLabel:`Відхилити це повідомлення`},searchPlaceholder:`Пошук в архівах...`,filterByPrinter:`Фільтрувати за принтером`,filterByStatus:`Фільтрувати за статусом`,sortBy:`Сортувати за`,sortNewest:`Спочатку найновіші`,sortOldest:`Спочатку найстаріші`,sortName:`Назва`,sortDuration:`Тривалість`,sortLargest:`Спочатку найбільші`,sortSmallest:`Спочатку найменші`,sortSize:`Розмір`,noArchives:`Архіви не знайдено`,noArchivesSearch:`Жоден архів не відповідає вашому пошуку`,originalPrintNotVisible:`Оригінальний друк не відображається — спробуйте очистити фільтри`,noArchivesYet:`Архівів ще немає`,prints:`друків`,pagination:{showing:`Показано`,to:`до`,of:`з`,show:`Показати`,page:`Сторінка`,all:`Усі`},loadingArchives:`Завантаження архівів...`,releaseToUpload:`Відпустіть, щоб вивантажити`,showAll:`Показати все`,showFavoritesOnly:`Показати лише вибране`,gridView:`Вигляд сітки`,listView:`Перегляд списку`,calendarView:`Перегляд календаря`,logView:`Журнал друку`,manageTags:`Керування тегами`,showFailedPrints:`Показати невдалі друки`,hideFailedPrints:`Приховати невдалі друки`,hideDuplicates:`Приховати дублікати`,viewOriginalPrint:`Клацніть, щоб переглянути оригінальний друк (#{{id}})`,printTime:`Час друку`,filamentUsed:`Використано філаменту`,cost:`Вартість`,preview:`Попередній перегляд`,deleteArchive:`Видалити архів`,deleteConfirm:`Ви впевнені, що хочете видалити цей архів?`,favorite:`В обраному`,unfavorite:`Видалити з вибраного`,viewDetails:`Переглянути деталі`,status:{completed:`Завершено`,failed:`Невдало`,stopped:`Зупинено`},toast:{source3mfAttached:`Вихідний файл 3MF долучено: {{filename}}`,failedUploadSource3mf:`Не вдалося вивантажити вихідний файл 3MF`,source3mfRemoved:`Вихідний файл 3MF видалено`,failedRemoveSource3mf:`Не вдалося видалити вихідний файл 3MF`,f3dAttached:`F3D долучено: {{filename}}`,failedUploadF3d:`Не вдалося вивантажити F3D`,f3dRemoved:`F3D видалено`,failedRemoveF3d:`Не вдалося видалити F3D`,timelapseAttached:`Додано покадрову зйомку: {{filename}}`,timelapseAlreadyAttached:`Таймлапс уже долучено`,noMatchingTimelapse:`Відповідного таймлапсу не знайдено`,failedScanTimelapse:`Не вдалося відсканувати покадрову зйомку`,failedAttachTimelapse:`Не вдалося долучити таймлапс`,timelapseRemoved:`Таймлапс видалено`,failedRemoveTimelapse:`Не вдалося видалити таймлапс`,timelapseUploaded:`Таймлапс вивантажено: {{filename}}`,failedUploadTimelapse:`Не вдалося вивантажити таймлапс`,archiveDeleted:`Архів видалено`,failedDeleteArchive:`Не вдалося видалити архів`,addedToFavorites:`Додано до обраних`,removedFromFavorites:`Видалено з вибраного`,projectUpdated:`Проєкт оновлений`,failedUpdateProject:`Не вдалося оновити проєкт`,linkCopied:`Посилання скопійовано в буфер обміну`,failedCopyLink:`Не вдалося скопіювати посилання`,photoDeleted:`Фото видалено`,failedDeletePhoto:`Не вдалося видалити фото`,failedDeleteArchives:`Не вдалося видалити архіви`,failedUpdateFavorites:`Не вдалося оновити вибране`,exportDownloaded:`Експорт завантажено`,exportFailed:`Помилка експорту`},menu:{print:`Друкувати`,openInBambuStudio:`Відкрити у слайсері`,slice:`Нарізати`,externalLink:`Зовнішнє посилання`,viewOnMakerWorld:`Переглянути на MakerWorld`,preview3d:`3D попередній перегляд`,viewTimelapse:`Переглянути таймлапс`,scanForTimelapse:`Знайти таймлапс`,uploadTimelapse:`Вивантажити таймлапс`,removeTimelapse:`Видалити таймлапс`,downloadSource3mf:`Завантажити вихідний файл 3MF`,uploadSource3mf:`Вивантажити вихідний файл 3MF`,replaceSource3mf:`Замінити вихідний файл 3MF`,removeSource3mf:`Видалити вихідний файл 3MF`,uploadF3d:`Вивантажити F3D`,replaceF3d:`Замінити F3D`,downloadF3d:`Завантажити F3D`,removeF3d:`Видалити F3D`,download:`Завантажити`,copyDownloadLink:`Копіювати посилання для завантаження`,qrCode:`QR-код`,viewPhotos:`Переглянути фото`,viewPhotosCount:`Переглянути фото ({{count}})`,projectPage:`Сторінка проєкту`,addToFavorites:`Додати в обране`,removeFromFavorites:`Видалити з вибраного`,edit:`Редагувати`,printLog:`Журнал друку`,goToProject:`Перейти до проєкту: {{name}}`,addToProject:`Додати до проєкту`,removeFromProject:`Видалити з проєкту`,loading:`Завантаження...`,noProjectsAvailable:`Немає доступних проєктів`,searchProjects:`Пошук проєктів…`,select:`Вибрати`,deselect:`Зняти вибір`,delete:`Видалити`},permission:{noReprint:`Ви не маєте дозволу на повторний друк цього архіву`,noAddToQueue:`Ви не маєте дозволу на додавання в чергу`,noUpdateArchives:`Ви не маєте дозволу на оновлення архівів`,noUploadFiles:`Ви не маєте дозволу на вивантаження файлів`,noDownload:`У вас немає дозволу на завантаження архівів`,noCopyLink:`Ви не маєте дозволу копіювати посилання для завантаження`,noDelete:`Ви не маєте дозволу на видалення цього архіву`,noEdit:`Ви не маєте дозволу редагувати цей запис`,noCreate:`Ви не маєте дозволу на створення архівів`},platePicker:{title:`Вибрати пластину для попереднього перегляду`,hint:`Цей архів містить кілька пластин. Виберіть одну, щоб відкрити її в переглядачі G-коду.`,plateLabel:`Пластина {{index}}`,objectCount:`Об’єктів: {{count}}`,objectCount_plural:`Об’єктів: {{count}}`,noGcode:`Цей архів не містить нарізаного G-коду для перегляду. Спочатку відкрийте його в Bambu Studio та виконайте нарізання.`},card:{previousPlate:`Попередня друкарська пластина`,nextPlate:`Наступна пластина`,plateNumber:`Пластина {{index}}`,moreOptions:`Клацніть правою кнопкою миші, щоб отримати додаткові параметри`,addToFavorites:`Додати в обране`,removeFromFavorites:`Видалити з вибраного`,cancelled:`скасовано`,failed:`не вдалося`,duplicate:`дублікат`,duplicateTitle:`Ця модель була надрукована раніше`,openSource3mf:`Відкрити вихідний файл 3MF у Bambu Studio (клацніть правою кнопкою, щоб переглянути додаткові дії)`,downloadF3d:`Завантажити файл дизайну Fusion 360`,viewTimelapse:`Переглянути сповільнену зйомку`,viewPhoto:`Переглянути 1 фото`,viewPhotos:`Переглянути фото: {{count}}`,openFolder:`Відкрити папку: {{name}}`,slicedFile:`Нарізаний файл - готовий до друку`,sourceFile:`Лише вихідний файл – зіставлення AMS недоступне`,gcode:`G-КОД`,source:`ДЖЕРЕЛО`,project:`Проєкт: {{name}}`,runsBadge:`Друків: {{count}}`,runsBadgeTitle:`Усього друків: {{count}} — успішних: {{successful}}, невдалих: {{failed}}. Натисніть, щоб переглянути повний журнал друку.`,estimated:`Приблизно: {{time}}`,actual:`Фактично: {{time}}`,accuracy:`Точність: {{percent}}%`,filament:`{{weight}} г`,layer:`{{count}} шар`,layers:`Шарів: {{count}}`,object:`{{count}} об’єкт`,objects:`Об’єктів: {{count}}`,slicedFor:`Нарізаний для {{model}}`,uploadedBy:`Вивантажив`,noPermissionReprint:`Ви не маєте дозволу на передрук`,noFileForReprint:`Файл 3MF недоступний: його не вдалося завантажити з принтера під час збереження запису про друк`,slicerAmsMapping:`Зіставлення AMS збережено ({{printer}})`,slicerAmsMappingTooltip:`Вибір слотів AMS, зроблений слайсером, збережено для принтера {{printer}}. Номери слотів мають сенс лише на ньому, тож повторний друк використає їх, тільки якщо знову спрямований на {{printer}}.`,noPermissionEdit:`Ви не маєте прав на редагування архівів`,noPermissionDelete:`Ви не маєте дозволу на видалення архівів`,openInBambuStudio:`Відкрити у слайсері`,openInBambuStudioToSlice:`Відкрити у слайсері для нарізання`,slice:`Нарізати`,externalLink:`Зовнішнє посилання`,makerWorld:`MakerWorld: {{designer}}`,viewProject:`Переглянути проєкт`,noExternalLink:`Немає зовнішнього посилання`,preview3d:`3D попередній перегляд`,download:`Завантажити`,edit:`Редагувати`,delete:`Видалити`},runLog:{title:`Журнал друку`,modalTitle:`Журнал друку — {{name}}`,modalTitleFallback:`цей архів`,empty:`Для цього архіву ще не зареєстровано жодної події друку.`,col:{date:`Дата`,status:`Статус`,duration:`Тривалість`,filament:`Філамент`,cost:`Вартість`},status:{completed:`Виконано`,failed:`Не вдалося`,cancelled:`Скасовано`,stopped:`Зупинено`,skipped:`Пропущено`,printing:`Друк`}},modal:{deleteArchive:`Видалити архів`,deleteConfirm:`Ви впевнені, що хочете видалити "{{name}}"? Цю дію не можна скасувати.`,deleteButton:`Видалити`,deletePurgeStats:`Також видалити цей друк із швидкої статистики (філамент, час, вартість, енергія)`,deleteQueueItemsWarning:`Елементи черги {{count}}, пов’язані з цим архівом, також буде видалено.`,deleteBlockedByPrinting:`Неможливо видалити — наразі друкуються елементи черги {{count}}. Спочатку зупиніть друк, а потім повторіть спробу.`,removeSource3mf:`Видалити джерело 3MF`,removeSource3mfConfirm:`Ви впевнені, що хочете видалити вихідний файл 3MF з "{{name}}"? Це призведе до видалення вихідного файлу проєкту слайсера.`,removeButton:`Видалити`,removeF3d:`Видалити F3D`,removeF3dConfirm:`Ви впевнені, що хочете видалити файл дизайну Fusion 360 із "{{name}}"?`,removeTimelapse:`Видалити Timelapse`,removeTimelapseConfirm:`Ви впевнені, що хочете видалити покадрове відео з "{{name}}"?`,timelapse:`{{name}} — таймлапс`,selectTimelapse:`Вибрати таймлапс`,selectTimelapseDesc:`Автоматичний збіг не знайдено. Виберіть покадрову зйомку для цього друку:`,deleteArchives:`Видалити архіви`,deleteArchivesConfirm:`Видалити вибрані архіви ({{count}})? Цю дію неможливо скасувати.`,deleteCount:`Видалити {{count}}`},page:{title:`Архіви`,printsCount:`Показано друків: {{filtered}} із {{total}}`,dropFilesHere:`Перетягніть файли .3mf сюди`,releaseToUpload:`Відпустіть, щоб вивантажити`,only3mfSupported:`Підтримуються лише файли .3mf.`,close:`Закрити`,selected:`Вибрано {{count}}.`,selectAll:`Вибрати усі`,tags:`Теги`,project:`Проєкт`,favorite:`В обраному`,delete:`Видалити`,toggledFavorites:`Оновлено вибране для архівів: {{count}}`,failedUpdateFavorites:`Не вдалося оновити вибране`,archivesDeleted:`Видалено архівів: {{count}}`,failedDeleteArchives:`Не вдалося видалити архіви`,photoDeleted:`Фото видалено`,failedDeletePhoto:`Не вдалося видалити фото`},list:{name:`Назва`,printer:`Принтер`,date:`Дата`,size:`Розмір`,actions:`Дії`,hasTimelapse:`Має таймлапс`},log:{date:`Дата`,printName:`Назва друку`,printer:`Принтер`,user:`Користувач`,status:`Статус`,duration:`Тривалість`,filament:`Філамент`,filamentUsed:`Витрачено філаменту`,cost:`Вартість`,energy:`Енергія`,energyCost:`Вартість енергії`,completedAt:`Завершено`,columns:`Стовпці`,sortBy:`Сортувати за: {{column}}`,allPrinters:`Усі принтери`,allUsers:`Усі користувачі`,allStatuses:`Усі статуси`,cancelled:`Скасовано`,skipped:`Пропущено`,dateFrom:`Від`,dateTo:`До`,noEntries:`Записів журналу друку не знайдено`,showing:`Показано {{count}} з {{total}} записів`,rowsPerPage:`Рядків`,page:`Сторінка`,prev:`Назад`,next:`Далі`,clearLog:`Очистити журнал`,clearLogTitle:`Очистити журнал друку`,clearLogConfirm:`Усі записи журналу друку буде остаточно видалено. Архіви та елементи черги залишаться без змін. Цю дію неможливо скасувати. Продовжити?`,clearLogButton:`Очистити все`,cleared:`Очищено записів журналу: {{count}}`,clearFailed:`Не вдалося очистити журнал друку`,deleteEntryTitle:`Видалити запис журналу друку`,deleteEntryConfirm:`Запис буде видалено з журналу, а пов’язані з ним філамент, час і вартість більше не враховуватимуться у швидкій статистиці. Відповідний архів, якщо він є, залишиться без змін. Цю дію неможливо скасувати.`,entryDeleted:`Запис журналу друку видалено`,entryDeleteFailed:`Не вдалося видалити запис журналу друку`,editEntryTitle:`Редагувати запис журналу друку`,editEntryDescription:`Класифікуйте цей запуск друку. Віджет «Аналіз невдач» групує дані за цими значеннями, тому зміни одразу відобразяться у статистиці.`,entryUpdated:`Запис журналу друку оновлено`,entryUpdateFailed:`Не вдалося оновити запис журналу друку`,statuses:{completed:`Виконано`,failed:`Не вдалося`,stopped:`Зупинено`,cancelled:`Скасовано`,skipped:`Пропущено`}}},dispatchToast:{untitled:`Завдання друку`,startingPrints:`Початок друку`,progressSummary:`{{complete}}/{{total}} завершено • Обробка: {{processing}}`,expandDetails:`Розгорнути подробиці надсилання`,collapseDetails:`Згорнути відомості про відправлення`,awaitingPrinter:`Очікування принтера…`,status:{processing:`Обробка`,completed:`Виконано`,failed:`Не вдалося`},failed:{generic:`Не вдалося відправити`,upload_failed:`Не вдалося вивантажити файл на принтер`,start_command_failed:`Принтер відхилив команду запуску`},dismiss:`Відхилити`},pipelineRuns:{title:`Запуски конвеєрів`,loading:`Завантаження…`,empty:`Запусків конвеєрів ще немає.`,filter:{pipeline:`Конвеєр`,status:`Статус`,target:`Ціль`,all:`Усі`,allPipelines:`Усі конвеєри`,allStatus:`Усі статуси`,allTargets:`Усі цілі`,clear:`Очистити фільтри`,noMatches:`Жоден запуск не відповідає поточним фільтрам.`},totalCount_one:`{{n}} запуск`,totalCount_other:`Запусків: {{n}}`,copies:`Копій: {{n}}`,failedCount:`Невдалих: {{n}}`,copyN:`Копія {{n}}`,retryFailed:`Повторити невдалі`,retryOf:`повтор запуску №{{n}}`,pagination:`{{start}}–{{end}} з {{total}}`,cancelledByUser:`Скасовано користувачем`,toast:{cancelled:`Запуск скасовано`,cancelFailed:`Не вдалося скасувати`,retryStarted:`Розпочато повторну спробу`,retryFailed:`Не вдалося розпочати повторну спробу`,cleared:`Видалено запусків: {{n}}`,clearFailed:`Не вдалося очистити`},clearLog:`Очистити журнал`,clearConfirmTitle:`Очистити журнал?`,clearConfirmBody:`Видалити всі завершені, невдалі, скасовані та частково невдалі запуски конвеєрів? Активні запуски буде збережено. Цю дію неможливо скасувати.`,clearConfirmAction:`Очистити`,jobStatus:{pending:`в очікуванні`,awaiting_printer:`в очікуванні принтера`,queued:`в черзі`,printing:`друк`,completed:`завершено`,failed:`не вдалося`,cancelled:`скасовано`}},queue:{title:`Черга друку`,subtitle:`Плануйте завдання друку та керуйте ними`,filamentShort:{rowBadge:`Недостатньо філаменту для призначеної котушки`,rowTooltip:`Планувальник відправлення позначив цей елемент. Натисніть «Запустити», щоб переглянути нестачу для кожного слота й вирішити, чи друкувати попри неї.`,confirmTitle:`Недостатня кількість філаменту`,confirmIntro:`На призначеній котушці недостатньо філаменту принаймні для одного слота. Усе одно друкувати?`,lineItem:`Слот {{slot}}: потрібно {{required}} г, {{remaining}} г залишилося`,unknown:`невідомо`,printAnyway:`Усе одно друкувати`},slicerAmsMapping:{rowBadge:`Слоти AMS збережено для цього принтера`,rowTooltip:`Цей запис містить точні слоти AMS, вибрані слайсером, збережені для принтера, на який націлено це завдання. Повторний друк на ньому може використати ті самі котушки замість повторного добору за типом і кольором.`},editQueueItem:`Редагувати елемент черги`,selectAllPlates:`Вибрати всі пластини ({{count}})`,deselectAll:`Зняти вибір із усіх`,printQueued:`Друк у черзі`,printQueuedWillStartWhenIdle:`Розпочнеться, коли принтер звільниться`,itemsQueued:`Додано до черги: {{count}}`,sending:`Надсилання...`,sendingProgress:`Надсилання {{current}}/{{total}}...`,adding:`Додавання...`,addingProgress:`Додавання {{current}}/{{total}}...`,savingProgress:`Збереження {{current}}/{{total}}...`,clearQueue:`Очистити чергу`,clearHistory:`Очистити історію`,emptyQueue:`Черга порожня`,position:`Позиція`,scheduledTime:`Запланований час`,moveUp:`Перемістити вгору`,moveDown:`Перемістити вниз`,startNow:`Почати зараз`,printingInProgress:`Виконується друк...`,viewArchive:`Переглянути архів`,viewInFileManager:`Переглянути в менеджері файлів`,itemCount:`Елементів: {{count}}`,itemCount_plural:`Елементів: {{count}}`,dragToReorder:`Перетягніть, щоб змінити порядок (лише для завдань «Якнайшвидше»)`,reorderHint:`Позиція впливає лише на завдання «Якнайшвидше». Заплановані завдання запускаються у встановлений час.`,sjf:{label:`SJF`,tooltip:`SJF (спочатку найкоротше завдання) — планувальник надає пріоритет коротшим завданням друку`},addedBy:`Додав {{name}}`,nextInQueue:`Наступний у черзі`,clearPlateSuccess:`Пластина очищена — готова до наступного друку`,plateNumber:`Пластина {{index}}`,quantity:`Кількість`,quantityHint:`Буде створено елементів черги: {{count}}`,plateQuantityLabel:`Повтори: {{plate}}`,plateQuantityTotal_one:`Усього запусків: {{count}}`,plateQuantityTotal_other:`Усього запусків: {{count}}`,batchOrders:{title:`Пакетні замовлення`,emptyTitle:`Пакетних замовлень немає`,emptyDescription:`Поставте в чергу файл із кількома столами або кілька копій одного стола — замовлення з’явиться тут разом із прогресом.`,filter:{active:`Активні`,completed:`Завершені`,cancelled:`Скасовані`,all:`Усі`},status:{active:`Активне`,completed:`Завершене`,cancelled:`Скасоване`},noTargets:`Лише групування`,noTargetsHint:`Створено до появи цільових кількостей на стіл, тож відстежує поставлені в чергу запуски, а не ціль.`,dispatchRemaining:`Поставити в чергу: {{count}}`,dispatchPlate:`Поставити решту`,strandedPlate:`Немає запуску для копіювання налаштувань`,strandedNotice:`Не вдається поставити в чергу {{runs}} із {{owed}} ще не виконаних запусків: для цієї пластини не залишилося запуску в черзі чи завершеного, з якого можна скопіювати налаштування. Поставте пластину в чергу один раз із файлу або скасуйте замовлення.`,dispatched:`Решту запусків для «{{name}}» поставлено в чергу`,plateProgress:`Готово {{completed}} з {{target}}`,remaining:`Залишилось: {{count}}`,failed:`Невдалих: {{count}}`,printing:`Друкується: {{count}}`,wholeFile:`Увесь файл`,due:`Термін: {{date}}`,costSoFar:`{{amount}} витрачено`,costRemaining:`(ще {{amount}})`},activeBatches:`Активні партії`,batchProgress:`{{completed}} з {{total}} завершено`,cancelBatch:`Скасувати решту`,batchCancelled:`Решту елементів партії скасовано`,cancelBatchConfirmTitle:`Скасувати партію`,cancelBatchConfirmMessage:`Закрити це замовлення? Запуски, що ще стоять у черзі, буде скасовано, і замовлення перестане вимагати те, чого не виготовило.`,batch:{defaultName:`Партія`,label:`Елементів: {{count}}`,label_plural:`Елементів: {{count}}`,pendingCount:`Очікують: {{count}}`,pendingCount_plural:`Очікують: {{count}}`,expand:`Розгорнути партію`,collapse:`Згорнути партію`,groupAsBatch:`Згрупувати в партію…`,groupAsBatchDescription:`Об’єднати вибрані елементи ({{count}}) в одну згортану партію.`,nameLabel:`Назва партії`,namePlaceholder:`напр. П’ятничні подарунки`,create:`Створити партію`,ungroup:`Розгрупувати`,ungroupConfirmTitle:`Розгрупувати партію?`,ungroupConfirmMessage:`Елементи залишатимуться в черзі, але більше не групуватимуться разом.`,dragGroup:`Перетягнути групу`},tabs:{batches:`Партії`,queue:`Черга`,history:`Історія`,timeline:`Хронологія`,pipelines:`Запуски конвеєрів`},layout:{flatList:`Список`,byPrinter:`За принтером`,groupByPrinter:`Групувати за принтером`},history:{emptyTitle:`Історії ще немає`,emptyDescription:`Тут відображатимуться завершені, скасовані та невдалі роздруківки.`,showMore:`Показати більше`,showingCount:`Показано {{shown}} з {{total}}`},dragGhost:{multiCount:`Елементів: {{count}}`,batch:`{{name}} (копія {{count}})`,batch_plural:`{{name}} ({{count}} копій)`},sections:{currentlyPrinting:`Наразі друкується`,queued:`У черзі`,history:`Історія`},status:{pending:`В очікуванні`,waiting:`Очікування`,printing:`Друк`,paused:`Призупинено`,completed:`Виконано`,failed:`Не вдалося`,skipped:`Пропущено`,cancelled:`Скасовано`},summary:{printing:`Друк`,queued:`У черзі`,totalTime:`Загальний час у черзі`,totalWeight:`Загальна вага черги`,history:`Історія`},filter:{allPrinters:`Усі принтери`,unassigned:`Не призначено`,allStatus:`Усі статуси`,allLocations:`Усі розташування`,any:`Будь-який`},sort:{byPosition:`Сортувати за позицією`,byName:`Сортувати за назвою`,byPrinter:`Сортувати за принтером`,bySchedule:`Сортувати за розкладом`,byDate:`Сортувати за датою`,ascendingOldest:`За зростанням (найстаріші спочатку)`,descendingNewest:`За спаданням (спочатку найновіші)`},badges:{staged:`Очікує ручного запуску`,requiresPrevious:`Потрібне успішне завершення попереднього завдання`,autoPowerOff:`Автоматичне вимкнення`,gcodeInjection:`G-код`},empty:{title:`Друк не заплановано`,description:`Заплануйте друк зі сторінки «Архіви» за допомогою параметра «Розклад» у контекстному меню або перетягніть файли, щоб почати.`},time:{etaIfStartedNow:`Час завершення, якщо запустити це завдання зараз`,whenFree:`Коли принтер звільниться`,overdue:`Прострочено`,now:`Зараз`,lessThanMinute:`Менше ніж за хвилину`,inMinutes:`Через {{count}} хв`,inHours:`Через {{count}} год`},actions:{startPrint:`Розпочати друк`,stopPrint:`Зупинити друк`,requeue:`Поставити в чергу знову`},bulkEdit:{title:`Редагувати {{count}} елемент`,title_plural:`Редагувати елементи ({{count}})`,description:`Лише змінені параметри будуть застосовані до вибраних елементів.`,printer:`Принтер`,noChange:`— Без змін —`,queueOptions:`Параметри черги`,staged:`Очікує ручного запуску`,autoPowerOff:`Автоматичне вимкнення після друку`,requirePrevious:`Вимагати успішного завершення попереднього завдання`,gcodeInjection:`Вставляти G-код`,printOptions:`Параметри друку`,bedLevelling:`Вирівнювання столу`,flowCalibration:`Калібрування потоку`,vibrationCalibration:`Калібрування вібрації`,layerInspection:`Перевірка першого шару`,timelapse:`Таймлапс`,useAms:`Використовувати AMS`,nozzleOffsetCali:`Калібрування зсуву сопла`,applyChanges:`Застосувати зміни`,selectAll:`Вибрати усі`,deselectAll:`Зняти вибір із усіх`,selected:`Вибрано: {{count}}`,editSelected:`Редагувати вибране`,cancelSelected:`Скасувати вибране`},confirm:{cancelTitle:`Скасувати запланований друк`,cancelMessage:`Ви впевнені, що бажаєте скасувати "{{name}}"?`,stopTitle:`Зупинити друк`,stopMessage:`Ви впевнені, що бажаєте зупинити поточний друк "{{name}}"? Це призведе до скасування завдання друку на принтері.`,removeTitle:`Видалити з історії`,removeMessage:`Ви впевнені, що бажаєте видалити "{{name}}" з історії черги?`,clearHistoryTitle:`Очистити історію`,clearHistoryMessage:`Видалити всі елементи з історії ({{count}})?`,cancelButton:`Скасувати друк`,stopButton:`Зупинити друк`,thisPrint:`цей друк`,thisItem:`цей елемент`},toast:{cancelled:`Пункт черги скасовано`,cancelFailed:`Не вдалося скасувати елемент`,removed:`Елемент черги видалено`,keptForOrder:`Скасовано, а не видалено: лише з цього запуску замовлення може знову поставити цю пластину в чергу`,historyKeptForOrders:`Збережено {{kept}}, які ще потрібні замовленням.`,removeFailed:`Не вдалося видалити елемент`,stopped:`Друк зупинено`,stopFailed:`Не вдалося зупинити друк`,released:`Друк відправлено в чергу`,startFailed:`Не вдалося почати друк`,reorderFailed:`Не вдалося змінити порядок черги`,historyCleared:`Очищено елементів історії: {{count}}`,clearHistoryFailed:`Не вдалося очистити історію`,updateFailed:`Не вдалося оновити елементи`,bulkCancelled:`Скасовано елементів: {{count}}`,bulkCancelFailed:`Не вдалося скасувати елементи`,batchCreated:`Партію «{{name}}» створено`,batchCreateFailed:`Не вдалося створити партію`,batchUngrouped:`Розгруповано елементів: {{count}}`,batchUngroupFailed:`Не вдалося розгрупувати партію`,resumedAfterFailure:`Відновлено чергу — {{restored}} завдання відновлено до стану очікування`,resumeAfterFailureFailed:`Не вдалося відновити чергу`},resumeAfterFailure:{banner:`{{printer}} заблоковано через помилку попереднього друку — завдання {{count}} пропущено`,bannerHint:`Усуньте проблему з принтером, а потім відновіть чергу, щоб повернути пропущені завдання й зняти блокування.`,button:`Відновити після невдачі`,confirmTitle:`Відновити чергу після помилки?`,confirmMessage:`Повернути пропущені завдання ({{count}}) для {{printer}} до стану очікування та зняти блокування після невдалого попереднього друку? Переконайтеся, що принтер готовий.`},timeline:{listView:`Список`,timelineView:`Хронологія`,unassigned:`Не призначено`,noData:`На цей день немає запланованих роздруківок`,nothingCommitted:`У цьому часовому проміжку немає підтверджених розкладів. Завдання з ручним запуском, завдання в очікуванні та завдання «Якнайшвидше» для вільних принтерів тут не показано. Установіть запланований час або запустіть відкладене завдання.`,allDoneBy:`Орієнтовне завершення всіх друків: {{time}}`,staged:`Очікує ручного запуску`,filterAll:`Показати все`,filterPrinting:`Друк`,filterQueued:`У черзі`,time:{anyMoment:`будь-якої миті`,minutesLeft:`Залишилося {{minutes}} хв`,hoursLeft:`Залишилося {{hours}} год`,hoursMinutesLeft:`Залишилося {{hours}} год {{minutes}} хв`},day:{previous:`Попередній день`,next:`Наступний день`,today:`Сьогодні`},window:{back12h:`Назад 12 годин`,forward12h:`Уперед на 12 годин`,now:`Зараз`},printerColumnHeader:`Принтер`},permissions:{noStopPrint:`Ви не маєте дозволу зупиняти друк`,noStartPrint:`Ви не маєте дозволу розпочинати друк`,noEdit:`Ви не маєте дозволу редагувати цей елемент черги`,noCancel:`Ви не маєте дозволу скасувати цей елемент черги`,noRequeue:`Ви не маєте дозволу повторно ставити елементи в чергу`,noRemove:`Ви не маєте дозволу на видалення цього елемента черги`,noClearHistory:`Ви не маєте дозволу очистити всю історію`,noEditItems:`Ви не маєте дозволу редагувати елементи черги`,noCancelItems:`Ви не маєте дозволу на скасування елементів черги`}},stats:{title:`Статистика`,subtitle:`Перетягніть віджети, щоб змінити порядок. Натисніть значок ока, щоб приховати.`,overview:`Огляд`,totalPrints:`Загальна кількість друків`,successRate:`Коефіцієнт успішності`,totalPrintTime:`Загальний час друку`,printTime:`Час друку`,totalFilament:`Загальна кількість використаного філаменту`,filamentUsed:`Використано філаменту`,filamentCost:`Вартість філаменту`,totalCost:`Загальна вартість`,energyUsed:`Використана енергія`,energyCost:`Вартість енергії`,energyWarmingUpTooltip:`Відстеження енергії все ще збирає щогодинні знімки. Підсумкові показники за діапазон дат стануть точними, коли існує принаймні один знімок до вибраного діапазону. Ранні значення можуть бути заниженими.`,averagePrintTime:`Середній час друку`,printsPerDay:`Друків на день`,byPrinter:`За принтером`,printsByPrinter:`Друки за принтерами`,byMaterial:`За матеріалом`,byMonth:`За місяцями`,last7Days:`Останні 7 днів`,last30Days:`Останні 30 днів`,last90Days:`Останні 90 днів`,allTime:`За весь час`,quickStats:`Швидка статистика`,printActivity:`Активність друку`,filamentTypes:`Типи філаментів`,filamentTrends:`Тенденції філаменту`,failureAnalysis:`Аналіз невдач`,timeAccuracy:`Точність оцінки часу`,successful:`Успішно:`,failed:`Невдало:`,cancelled:`Скасовано:`,perfectEstimate:`100% = ідеальна оцінка`,noTimeAccuracyData:`Даних про точність часу ще немає`,noFilamentData:`Немає даних про філамент`,noPrinterData:`Дані принтера відсутні`,noPrintData:`Немає даних про друк`,noPrintDataLast30Days:`Немає даних про друк за останні 30 днів`,failureReasons:`Причини невдач`,topFailureReasons:`Основні причини невдач`,failedPrintsCount:`Невдалих друків: {{failed}} із {{total}}`,lastWeekRate:`Минулого тижня: {{rate}}%`,resetLayout:`Скинути макет`,recalculateCosts:`Перерахувати витрати`,recalculateCostsHint:`Перерахувати вартість усіх архівних друків за поточними цінами на філамент`,exportStats:`Експортувати статистику`,exportAsCsv:`Експортувати як CSV`,exportAsExcel:`Експортувати як Excel`,hiddenCount:`Приховано: {{count}}`,exportDownloaded:`Експорт завантажено`,exportFailed:`Помилка експорту`,layoutReset:`Розташування віджетів скинуто`,recalculatedCosts:`Перераховано вартість архівів: {{count}}`,recalculateFailed:`Не вдалося перерахувати витрати`,loadingStats:`Завантаження статистики...`,noPermissionResetLayout:`Ви не маєте дозволу на скидання макета`,noPermissionRecalculate:`Ви не маєте дозволу на перерахунок витрат`,noPrintDataInRange:`У вибраному діапазоні немає даних про друк`,periodFilament:`Філамент за період`,periodCost:`Вартість періоду`,avgPerPrint:`Середнє на друк`,usageOverTime:`Використання в часі`,energyOverTime:`Споживання енергії в часі`,filamentByWeight:`Вага`,printDuration:`Тривалість друку`,printerUtilization:`Використання принтера`,filamentSuccess:`Успіх за матеріалом`,printHabits:`Звички друку`,printTimeOfDay:`Розподіл друків за часом доби`,colorDistribution:`Розподіл кольору`,noColorData:`Немає даних про колір`,records:`Записи`,longestPrint:`Найтриваліший друк`,heaviestPrint:`Найважчий друк`,mostExpensivePrint:`Найдорожчий`,busiestDay:`Найзавантаженіший день`,successStreak:`Серія успішних друків`,streakPrint:`успішний друк поспіль`,streakPrints:`Успішних друків поспіль: {{count}}`,printerStats:`Статистика принтера`,hours:`год`,avgPrints:`Середня кількість друків`,noArchiveData:`Немає даних про друк`,filamentByTime:`Час`,avgWeight:`Середня вага`,avgTime:`Середній час`,filamentByPrints:`Друки`,timeframe:{today:`Сьогодні`,"this-week":`Цей тиждень`,"this-month":`Цей місяць`,"last-7":`Останні 7 днів`,"last-30":`Останні 30 днів`,"last-90":`Останні 90 днів`,"this-year":`Цього року`,"all-time":`За весь час`,custom:`Власний діапазон`,from:`Від`,to:`До`},allUsers:`Усі користувачі`,noUser:`Немає користувача (система)`,filterByUser:`Фільтрувати за користувачем`},maintenance:{title:`Технічне обслуговування`,overview:`Огляд`,allOk:`Усі роботи з технічного обслуговування виконано`,dueCount:`Потрібне обслуговування: {{count}}`,dueCount_plural:`Потрібне обслуговування: {{count}}`,warningCount:`{{count}} попередження`,warningCount_plural:`{{count}} попередження`,totalPrintTime:`Загальний час друку`,nextMaintenance:`Наступне технічне обслуговування`,nothingDue:`Обслуговування не потрібне`,tasks:`Завдання`,lastPerformed:`Востаннє виконано`,interval:`Інтервал`,hoursRemaining:`Залишилося {{hours}} год`,hoursOverdue:`Прострочено на {{hours}} год`,markDone:`Позначити як виконане`,performMaintenance:`Виконати технічне обслуговування`,history:`Історія`,noHistory:`Історії обслуговування немає`,editPrintHours:`Змінити години друку`,currentHours:`Поточна кількість годин`,statusTab:`Статус`,settingsTab:`Налаштування`,overdueCount:`{{count}} прострочено`,dueSoonCount:`{{count}} незабаром`,dueSoon:`Незабаром`,allGood:`Все добре`,overdueBy:`Прострочено на {{duration}}`,dueIn:`Через {{duration}}`,timeLeft:`Залишилося {{duration}}`,day:`1 день`,days:`{{count}} днів`,week:`1 тиждень`,weeks:`{{count}} тижнів`,month:`1 місяць`,months:`{{count}} місяців`,year:`1 рік`,maintenanceTypes:`Види технічного обслуговування`,maintenanceTypesDescription:`Системні та власні завдання технічного обслуговування`,addCustomType:`Додати спеціальний тип`,restoreDefaults:`Відновити завдання за замовчуванням`,intervalType:`Тип інтервалу`,intervalValue:`Інтервал ({{type}})`,icon:`значок`,documentationLink:`Посилання на документацію (необов’язково)`,assignToPrinters:`Призначити принтерам`,selectAtLeastOnePrinter:`Вибрати принаймні один принтер`,addType:`Додати тип`,custom:`Власне`,printHours:`Години друку`,calendarDays:`Календарні дні`,exampleName:`наприклад, Замінити HEPA-фільтр`,viewDocumentation:`Переглянути документацію`,timeBasedInterval:`Часовий інтервал`,intervalOverrides:`Перевизначення інтервалів`,intervalOverridesDescription:`Налаштувати інтервали для конкретних принтерів`,assignedToPrinters:`Призначено для принтерів:`,noPrintersAssigned:`Принтерів не призначено`,addPrinterShort:`Додати:`,printersAssignedClick:`Призначено принтерів: {{count}} — натисніть, щоб керувати`,removeFromPrinter:`Видалити з цього принтера`,types:{lubricateCarbonRods:`Змастити карбонові стрижні`,lubricateRails:`Змастити лінійні напрямні`,cleanNozzle:`Очистити сопло/хотенд`,checkBelts:`Перевірити натяг ременів`,cleanBuildPlate:`Очистити друкарську пластину`,checkExtruder:`Перевірити шестерні екструдера`,checkCooling:`Перевірити вентилятори охолодження`,generalInspection:`Загальний огляд`,cleanCarbonRods:`Очистити карбонові стрижні`,lubricateSteelRods:`Змастити сталеві стрижні`,cleanSteelRods:`Очистити сталеві стрижні`,cleanLinearRails:`Очистити лінійні напрямні`,checkPtfeTube:`Перевірити PTFE-трубку`,replaceHepaFilter:`Замінити HEPA-фільтр`,replaceCarbonFilter:`Замінити вугільний фільтр`,lubricateLeftNozzleRail:`Змастити ліву напрямну сопла`},maintenanceComplete:`Технічне обслуговування позначено як завершене`,typeUpdated:`Оновлено тип обслуговування`,typeDeleted:`Тип обслуговування видалено`,defaultsRestored:`Відновлено завдання за замовчуванням {{count}}`,printHoursUpdated:`Години друку оновлено`,printerAssigned:`Принтер призначено`,printerRemoved:`Принтер видалено`,deleteTypeConfirm:`Видалити "{{name}}"?`,deleteSystemTypeTitle:`Видалити завдання обслуговування за умовчанням?`,deleteSystemTypeMessage:`Ви впевнені, що бажаєте видалити стандартне завдання обслуговування "{{name}}"?`,noPermissionUpdate:`Ви не маєте дозволу на оновлення елементів обслуговування`,noPermissionPerform:`Ви не маєте дозволу на проведення технічного обслуговування`,noPermissionEditTypes:`Ви не маєте дозволу редагувати типи обслуговування`,noPermissionDeleteTypes:`Ви не маєте дозволу на видалення типів обслуговування`,noPermissionEditHours:`Ви не маєте дозволу редагувати години друку`,noPermissionRemovePrinter:`Ви не маєте дозволу на видалення призначень принтера`,noPermissionAssignPrinter:`Ви не маєте дозволу призначати принтери`,noPermissionEditIntervals:`Ви не маєте дозволу редагувати інтервали`,configureSettings:`Налаштувати типи та інтервали технічного обслуговування`},settings:{sliceEngine:`Рушій нарізання`,sliceEngineSidecar:`Серверний sidecar`,sliceEngineSidecarHint:`Нарізання виконується на сервері, у контейнері sidecar слайсера.`,sliceEngineBrowser:`У браузері`,sliceEngineBrowserHint:`Нарізання виконується на цьому пристрої, без сервера.`,title:`Налаштування`,general:`Загальні`,tabs:{general:`Загальні`,smartPlugs:`Розумні розетки`,sensors:`Датчики`,notifications:`Сповіщення`,queue:`Робочий процес`,queueDispatch:`Черга та відправка`,queuePipelines:`Конвеєри`,filament:`Філамент`,network:`Мережа`,apiKeys:`Ключі API`,virtualPrinter:`Віртуальний принтер`,spoolbuddy:`SpoolBuddy`,failureDetection:`Виявлення несправностей`,users:`Автентифікація`,backup:`Резервне копіювання`,emailAuth:`Автентифікація електронної пошти`,ldap:`LDAP`,twoFa:`Двофакторна автентифікація`,oidc:`SSO / OIDC`,security:`Безпека`},spoolbuddy:{infoTitle:`Пристрої SpoolBuddy`,infoBody:`Термінали SpoolBuddy автоматично реєструються за допомогою сигналів стану. Скасуйте реєстрацію пристрою, якщо він більше не використовується або після збою служби залишився застарілий дублікат.`,duplicatesTitle:`Зареєстровано пристроїв: {{count}}`,duplicatesBody:`Інтерфейс термінала використовує лише перший зареєстрований пристрій. Якщо один із записів є застарілим дублікатом після збою, скасуйте його реєстрацію. Пристрій у мережі зареєструється знову під час наступного сигналу стану.`,empty:`Ще немає зареєстрованих пристроїв SpoolBuddy.`,online:`Онлайн`,offline:`Не в мережі`,unregister:`Скасувати реєстрацію`,unregisterSuccess:`Реєстрацію пристрою скасовано`,unregisterError:`Не вдалося скасувати реєстрацію пристрою`,confirmTitle:`Скасувати реєстрацію пристрою SpoolBuddy?`,confirmBody:`Пристрій «{{hostname}}» ({{deviceId}}) буде видалено з бази даних. Якщо він у мережі, то зареєструється знову під час наступного сигналу стану.`,ipAddress:`IP-адреса`,firmware:`Прошивка`,lastSeen:`Востаннє в мережі`,daemonUptime:`Час роботи демона`,systemUptime:`Час роботи системи`,never:`Ніколи`,nfc:`NFC`,scale:`Ваги`,cpuTemp:`Температура ЦП`,cpuLoad:`Завантаження ЦП`,memory:`Пам’ять`,disk:`Диск`,update:`Оновити`,updateConfirmTitle:`Оновити демон Spoolbuddy?`,updateConfirmBody:`Запустити оновлення програмного забезпечення на "{{hostname}}"? Щойно оновлення буде застосовано, демон перезапуститься.`,restartBrowser:`Перезапустити браузер`,restartBrowserConfirmTitle:`Перезапустити веб-переглядач термінала?`,restartBrowserConfirmBody:`Перезапустити веб-переглядач кіоску на "{{hostname}}"? Дисплей на короткий час згасне.`,restartDaemon:`Перезапустити службу`,restartDaemonConfirmTitle:`Перезапустити демон Spoolbuddy?`,restartDaemonConfirmBody:`Перезапустити демон Spoolbuddy на "{{hostname}}"? Пристрій вийде з мережі на кілька секунд.`,reboot:`Перезавантажити`,rebootConfirmTitle:`Перезавантажити пристрій?`,rebootConfirmBody:`Перезавантажити «{{hostname}}»? Пристрій буде офлайн приблизно хвилину.`,shutdown:`Вимкнути`,shutdownConfirmTitle:`Вимкнути пристрій?`,shutdownConfirmBody:`Вимкнути "{{hostname}}"? Щоб увімкнути його, вам знадобиться фізичний доступ.`,commandConfirm:`Підтвердити`,commandQueued:`Команда в черзі`,commandError:`Не вдалося надіслати команду`},ldap:{title:`Автентифікація LDAP`,enabledDesc:`Автентифікація LDAP увімкнена`,disabledDesc:`Автентифікація LDAP вимкнена`,disabledHint:`Налаштуйте та збережіть налаштування LDAP нижче, а потім увімкніть.`,enabled:`LDAP автентифікація ввімкнена`,disabled:`LDAP автентифікація вимкнена`,feature1:`Користувачі можуть входити за допомогою облікових даних LDAP.`,feature2:`Обліковий запис локального адміністратора залишається резервним`,feature3:`Групи LDAP зіставляються з групами BamBuddy під час входу`,serverConfig:`Налаштування сервера LDAP`,serverUrl:`URL сервера`,serverUrlHint:`Використовуйте ldaps:// для SSL або ldap:// із StartTLS`,security:`Безпека`,securityHint:`StartTLS оновлює звичайне підключення до TLS. LDAPS використовує TLS із самого початку.`,bindDn:`DN прив’язки (службовий обліковий запис)`,bindPassword:`Пароль прив’язки`,searchBase:`Базовий DN пошуку`,userFilter:`Фільтр пошуку користувача`,userFilterHint:`{username} буде замінено на ім’я користувача, введене під час входу. Для OpenLDAP використовуйте (uid={username}).`,advanced:`Розширені налаштування`,autoProvision:`Автоматично створювати користувачів`,autoProvisionHint:`Автоматично створювати обліковий запис BamBuddy після першого входу LDAP.`,defaultGroup:`Група за замовчуванням`,defaultGroupNone:`— Немає (без резервної групи) —`,defaultGroupHint:`Запасна група призначається, коли користувач LDAP автентифікується, але його немає в списку жодної зіставленої групи LDAP. Залиште порожнім, щоб залишити непризначених користувачів без дозволів.`,groupMapping:`Зіставлення груп (JSON)`,groupMappingHint:`Зіставте DN груп LDAP із групами BamBuddy. Доступні групи: `,testConnection:`Перевірити підключення`,settingsSaved:`Налаштування LDAP збережено`,errors:{serverRequired:`Потрібна URL-адреса сервера LDAP`,searchBaseRequired:`Потрібен базовий DN пошуку`,enableAuthFirst:`Спочатку ввімкніть автентифікацію`,configureLdapFirst:`Спочатку збережіть налаштування LDAP.`}},email:{smtpSettings:`Налаштування SMTP`,smtpHost:`Сервер SMTP`,smtpPort:`Порт SMTP`,security:`Безпека`,authentication:`Автентифікація`,username:`Ім’я користувача`,password:`Пароль`,fromEmail:`Адреса відправника`,fromName:`Ім’я відправника`,testConnection:`Перевірити підключення SMTP`,testRecipient:`Електронна адреса тестового одержувача`,sendTest:`Надіслати тестовий електронний лист`,sending:`Надсилання...`,save:`Зберегти налаштування`,saving:`Збереження...`,advancedAuth:`Розширена автентифікація`,advancedAuthEnabled:`Розширену автентифікацію ввімкнено`,advancedAuthEnabledDesc:`Функції керування користувачами на основі електронної пошти активні. Нові користувачі отримають автоматично згенеровані паролі електронною поштою, і користувачі зможуть скинути свої паролі за допомогою функції «Забутий пароль».`,advancedAuthDisabled:`Розширену автентифікацію вимкнено`,advancedAuthDisabledDesc:`Увімкніть розширену автентифікацію, щоб активувати функції електронної пошти для керування користувачами.`,enable:`Увімкнути`,disable:`Вимкнути`,feature1:`Паролі генеруються автоматично та надсилаються новим користувачам електронною поштою`,feature2:`Користувачі можуть входити за іменем користувача або електронною адресою`,feature3:`Доступна функція «Забув пароль».`,feature4:`Адміністратори можуть скинути паролі користувачів електронною поштою`,errors:{requiredFields:`Заповніть усі обов’язкові поля`,usernameRequired:`Якщо ввімкнено автентифікацію, потрібне ім’я користувача`,enterTestEmail:`Введіть тестову електронну адресу`,smtpServerAndEmail:`Перед перевіркою вкажіть SMTP-сервер і адресу відправника`,usernamePasswordRequired:`Якщо ввімкнено автентифікацію, потрібні ім’я користувача та пароль`,configureSmtpFirst:`Спочатку налаштуйте та перевірте параметри SMTP`,enableAuthFirst:`Щоб використовувати функції електронної пошти, спочатку ввімкніть автентифікацію.`},success:{settingsSaved:`Налаштування SMTP успішно збережено`},securityOptions:{starttls:`STARTTLS (порт 587)`,ssl:`SSL/TLS (порт 465)`,none:`Без шифрування (порт 25)`},authOptions:{enabled:`Увімкнено`,disabled:`Вимкнено`}},appearance:`Зовнішній вигляд`,notifications:`Сповіщення`,smartPlugs:`Розумні розетки`,spoolman:`Spoolman`,updates:`Оновлення`,language:`Мова`,languageDescription:`Виберіть бажану мову`,theme:`Тема`,themeLight:`Світла`,themeDark:`Темна`,themeSystem:`Системна`,defaultView:`Початкове подання`,defaultViewDescription:`Сторінка, яка відображатиметься під час відкриття програми`,checkForUpdates:`Перевірити наявність оновлень`,autoUpdate:`Автоматичне оновлення`,currentVersion:`Поточна версія`,latestVersion:`Остання версія`,upToDate:`У вас установлено останню версію`,updateAvailable:`Доступне оновлення`,notificationLanguage:`Мова сповіщень`,notificationLanguageDescription:`Мова для push-повідомлень`,bedCooledThreshold:`Поріг охолодження столу`,bedCooledThresholdDescription:`Температура, нижче якої стіл вважається охолодженим після друку`,userNotificationsEnabled:`Сповіщення користувача`,userNotificationsEnabledDescription:`Увімкніть меню сповіщень користувача та сповіщення електронною поштою про події завдань друку. Потрібна розширена автентифікація.`,userNotificationsDisabledHint:`Увімкніть розширену автентифікацію, щоб використовувати сповіщення користувачів.`,notificationProviders:`Служби сповіщень`,addProvider:`Додати службу`,editProvider:`Редагувати службу`,providerType:`Тип служби`,testNotification:`Перевірити сповіщення`,testSuccess:`Тестове сповіщення успішно надіслано`,testFailed:`Не вдалося надіслати тестове сповіщення`,quietHours:`Період тиші`,quietHoursDescription:`Не надсилати сповіщень у цей період`,quietHoursStart:`Початок`,quietHoursEnd:`Кінець`,events:{title:`Події сповіщень`,printStart:`Друк розпочато`,printComplete:`Друк завершено`,printFailed:`Помилка друку`,printStopped:`Друк зупинено`,printProgress:`Етапи виконання`,printProgressDescription:`Сповіщати після досягнення 25%, 50% і 75%`,printerOffline:`Принтер не в мережі`,printerError:`Помилка принтера`,filamentLow:`Мало філаменту`,maintenanceDue:`Потрібне технічне обслуговування`,maintenanceDueDescription:`Повідомити, коли потрібне обслуговування`},smartPlug:{title:`Розумні розетки`,add:`Додати розумну розетку`,edit:`Редагувати розумну розетку`,name:`Назва`,ipAddress:`IP-адреса`,linkedPrinter:`Пов’язаний принтер`,autoOn:`Автоматичне ввімкнення`,autoOnDescription:`Увімкнути на початку друку`,autoOff:`Автоматичне вимкнення`,autoOffDescription:`Вимкнути після завершення друку`,offDelay:`Затримка вимкнення`,offDelayMinutes:`Хвилини після завершення друку`,offDelayTemp:`Коли температура сопла нижча за задану`,currentState:`Поточний стан`,turnOn:`Увімкнути`,turnOff:`Вимкнути`},filamentTracking:`Облік філаменту`,filamentTrackingDesc:`Виберіть спосіб обліку котушок філаменту. Можна використовувати вбудований інвентар або підключити зовнішній сервер Spoolman.`,autoAddUnknownRfid:`Автоматично додавати невідомі RFID-котушки`,autoAddUnknownRfidDesc:`Автоматично створювати запис інвентарю, коли виявлено котушку з невідомою RFID-міткою. Вимкніть, якщо ви заздалегідь реєструєте нові котушки вручну, щоб уникнути дублікатів.`,filamentChecks:`Перевірки філаменту`,disableFilamentWarnings:`Вимкнути попередження про філамент`,disableFilamentWarningsDesc:`Не показувати попередження про недостатню кількість філаменту під час запуску друку або додавання до черги`,preferLowestFilament:`Віддавати перевагу котушці з найменшим залишком`,preferLowestFilamentDesc:`Якщо підходять кілька котушок, використовувати котушку з найменшим залишком філаменту`,preferLowestFilamentBackupNote:`Діє лише тоді, коли на принтері ввімкнено AMS Filament Backup. Інакше після вичерпання вибраної котушки принтер не зможе перейти на другу.`,trackingModeBuiltIn:`Вбудований інвентар`,trackingModeBuiltInDesc:`Автоматичне зіставлення за RFID та облік використання`,trackingModeSpoolmanDesc:`Зовнішній сервер керування філаментом`,builtInFeatureRfid:`Автоматично виявляє RFID-котушки Bambu Lab в AMS`,builtInFeatureUsage:`Обліковує витрати філаменту для кожного друку`,builtInFeatureCatalog:`Керування котушками, кольорами та профілями K-фактора`,builtInFeatureThirdParty:`Котушки сторонніх виробників можна пов’язувати з котушками інвентарю`,amsSyncButton:`Синхронізувати масу з AMS`,amsSyncTitle:`Синхронізація маси котушок з AMS`,amsSyncMessage:`Масу всіх котушок інвентарю буде перезаписано відповідно до поточних значень залишку у відсотках, отриманих з AMS підключених принтерів. Скористайтеся цим для відновлення пошкоджених даних про масу. Принтери мають бути в мережі.`,amsSyncing:`Синхронізація...`,amsSyncSuccess:`Синхронізовано: {{synced}}; пропущено: {{skipped}}`,amsSyncError:`Не вдалося синхронізувати масу з AMS`,spoolmanAmsSyncButton:`Синхронізувати масу котушок Spoolman з AMS`,spoolmanAmsSyncTitle:`Синхронізація маси котушок Spoolman з AMS`,spoolmanAmsSyncMessage:`Масу всіх котушок Spoolman буде оновлено відповідно до поточних значень залишку в AMS підключених принтерів. Принтери мають бути в мережі.`,spoolmanAmsSyncing:`Синхронізація...`,spoolmanAmsSyncSuccess:`Синхронізовано: {{synced}}; пропущено: {{skipped}}`,spoolmanAmsSyncError:`Не вдалося синхронізувати масу котушок Spoolman з AMS`,spoolmanAmsSyncErrorUnreachable:`Не вдалося синхронізувати масу котушок Spoolman: сервер Spoolman недоступний`,spoolmanAmsSyncErrorNotConfigured:`Не вдалося синхронізувати масу котушок Spoolman: сервер Spoolman не налаштовано`,spoolmanNotConfigured:`Spoolman не налаштовано`,spoolmanFilamentCatalogTitle:`Каталог філаментів Spoolman`,spoolmanFilamentCatalogDesc:`Назви філаментів і вага тари з вашого екземпляра Spoolman. Тут можна редагувати назву та вагу котушки; усі інші властивості керуються безпосередньо в Spoolman.`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`URL вашого сервера Spoolman (наприклад, http://localhost:7912)`,spoolmanConnected:`Підключено`,spoolmanDisconnected:`Відключено`,status:`Статус`,connect:`Підключитися`,disconnect:`Від’єднатися`,howSyncWorks:`Як працює синхронізація`,syncInfoRfidOnly:`Синхронізуються лише офіційні котушки Bambu Lab із RFID.`,syncInfoAutoCreate:`Нові котушки автоматично створюються в Spoolman під час першої синхронізації`,syncInfoThirdPartySkipped:`Котушки не від Bambu Lab — сторонні або повторно заправлені — пропускаються`,linkingExistingSpools:`Зв’язування існуючих котушок`,linkingExistingSpoolsDesc:`Щоб пов’язати наявні котушки Spoolman з AMS, наведіть вказівник на слот AMS і натисніть «Пов’язати зі Spoolman».`,syncMode:`Режим синхронізації`,syncModeAuto:`Автоматичний`,syncModeManual:`Тільки вручну`,syncModeAutoDesc:`Дані AMS синхронізуються автоматично після виявлення змін`,syncModeManualDesc:`Синхронізувати лише вручну`,syncAmsData:`Синхронізувати дані AMS`,syncAmsDataDesc:`Вручну синхронізувати дані AMS принтера зі Spoolman`,allPrinters:`Усі принтери`,noDefaultPrinter:`Немає умовчання (запитувати щоразу)`,sidebarOrder:`Порядок бічної панелі`,saveThumbnails:`Зберегти мініатюри`,captureFinishPhoto:`Зробити фото після завершення`,noPrintersConfigured:`Принтери не налаштовані`,archiveMode:{always:`Завжди створювати запис архіву`,never:`Ніколи не створювати запис архіву`,ask:`Запитувати щоразу`},checkForUpdatesLabel:`Перевірити наявність оновлень`,checkPrinterFirmware:`Перевірити прошивку принтера`,includeBetaUpdates:`Включати бета-версії`,includeBetaUpdatesDesc:`Повідомляти про бета-версії та попередні версії під час перевірки оновлень`,localLogin:{disable:`Вимкнути локальний вхід за іменем користувача й паролем`,disableHint:`Якщо ввімкнено, увійти можна буде лише через постачальників SSO. На LDAP це не впливає. Щоб зберегти резервний спосіб входу, установіть на сервері BAMBUDDY_LOCAL_LOGIN=true.`},enableRetry:`Увімкнути повторну спробу`,homeAssistantDescription:`Керуйте розумними розетками через Home Assistant`,environmentManagedLabel:`(Кероване середовище)`,autoEnabledViaEnv:`Автоматично вмикається через змінні середовища`,urlFromEnvReadOnly:`Значення, встановлене змінною середовища HA_URL (лише читання)`,tokenFromEnvReadOnly:`Значення, установлене змінною середовища HA_TOKEN (лише читання)`,mqttConnectedTo:`Підключено до`,prometheusDescription:`Надавати дані принтерів у форматі Prometheus`,noSmartPlugsTitle:`Розумні розетки не налаштовано`,noSmartPlugsDescription:`Додайте розумну розетку на базі Tasmota, щоб відстежувати споживання енергії та автоматизувати керування живленням.`,noProvidersTitle:`Постачальники не налаштовані`,noProvidersDescription:`Додайте постачальника, щоб отримувати сповіщення.`,noTemplatesAvailable:`Немає доступних шаблонів. Перезапустіть серверну частину, щоб створити стандартні шаблони.`,apiPermissionView:`Перегляд стану принтера та черги`,apiPermissionEdit:`Додавання та видалення елементів із черги друку`,apiKeysEmptyTitle:`Немає ключів API`,apiKeysEmptyDescription:`Створіть ключ API для інтеграції із зовнішніми службами.`,noUsersFound:`Користувачів не знайдено`,noGroupsFound:`Групи не знайдено`,noGroupsAvailable:`Немає доступних груп`,passwordsDoNotMatch:`Паролі не збігаються`,systemGroupWarning:`Назви системних груп не можна змінювати`,authDisabledTitle:`Автентифікація вимкнена`,authDisabledFeature1:`Вимагати входу для доступу до системи`,authDisabledFeature2:`Створювати кількох користувачів із дозволами на основі груп`,authDisabledFeature3:`Керувати доступом за допомогою понад 50 окремих дозволів`,userHasCreated:`Цей користувач створив:`,userItemsQuestion:`Що зробити з цими елементами?`,deleteUserConfirm:`Ви впевнені, що хочете видалити цього користувача?`,actionCannotBeUndone:`Цю дію не можна скасувати.`,addFirstSmartPlug:`Додати першу розумну розетку`,providers:`Постачальники`,log:`Журнал`,testAll:`Перевірити все`,testResults:`Результати тестування`,testPassedCount:`{{count}} пройдено`,testFailedCount:`{{count}} не вдалося`,messageTemplates:`Шаблони повідомлень`,messageTemplatesDescription:`Налаштуйте текст сповіщень для кожної події.`,apiKeys:`Ключі API`,apiKeysDescription:`Створіть ключі API для зовнішніх інтеграцій і веб-хуків.`,createKey:`Створити ключ`,apiKeyCreated:`Ключ API створено успішно`,apiKeyCopyWarning:`Скопіюйте цей ключ зараз — його більше не буде показано!`,useInApiBrowser:`Використати в оглядачі API`,apiKeyQrButton:`QR-код`,apiKeyQrTitle:`Відскануйте для налаштування`,apiKeyQrCaption:`Скануйте за допомогою мобільного додатка, щоб додати цей сервер і ключ API.`,apiKeyQrWarning:`Містить ваш секретний ключ API. Не передавайте його іншим і не зберігайте знімки екрана там, де їх можуть побачити сторонні.`,createNewApiKey:`Створити новий ключ API`,keyName:`Назва ключа`,keyNamePlaceholder:`наприклад, Home Assistant, OctoPrint`,readStatus:`Читати статус`,readStatusDescription:`Перегляд стану принтера, черги, бібліотеки, архівів і конвеєрів слайсера`,manageQueue:`Керувати чергою`,manageQueueDescription:`Додавання та видалення елементів із черги друку. Разом із «Керувати бібліотекою» — запуск конвеєрів слайсера`,controlPrinter:`Керування принтером`,controlPrinterDescription:`Призупинення, відновлення та зупинка друку`,manageLibrary:`Керувати бібліотекою`,manageLibraryDescription:`Вивантажувати, перейменовувати, видаляти та слайсити файли бібліотеки; імпортувати моделі з MakerWorld. Разом із «Керувати чергою» — запуск конвеєрів слайсера`,manageInventory:`Керувати інвентарем`,manageInventoryDescription:`Створення, оновлення та видалення котушок і записів інвентарю. Потрібно для кіосків SpoolBuddy: сканування NFC, покази ваг і системні команди кіоску.`,manageMaintenance:`Керувати технічним обслуговуванням`,manageMaintenanceDescription:`Реєстрація завершеного технічного обслуговування, скидання лічильників, редагування інтервалів і керування каталогом технічного обслуговування. Підходить для автоматизації Home Assistant, яка записує «Я очистив сопло», не надаючи ширшого контролю над принтером.`,manageArchives:`Керувати архівами`,manageArchivesDescription:`Редагувати та видаляти архіви друку, у тому числі старі друки та їхній статистичний внесок. Підходить для автоматизації, яка обрізає історію друку.`,manageProjects:`Керувати проєктами`,manageProjectsDescription:`Створюйте, оновлюйте та видаляйте проєкти, додавайте до них архіви. Підходить для автоматизації, яка організовує друк у проєкти.`,libraryBadge:`Бібліотека`,inventoryBadge:`Інвентар`,maintenanceBadge:`Технічне обслуговування`,archivesBadge:`Архіви`,projectsBadge:`Проєкти`,cloudAccess:`Дозволити доступ до хмари`,cloudAccessDescription:`Дозволити читати від вашого імені профілі та філаменти Bambu Cloud. Потрібен вхід у Bambu Cloud.`,cloudBadge:`Хмара`,updateEnergyCost:`Оновлювати ціну електроенергії`,updateEnergyCostDescription:`Дозволити цьому ключу надсилати нову ціну електроенергії за кВт·год до /settings/electricity-price. Це корисно для автоматизацій Home Assistant із динамічними тарифами (Tibber, Octopus тощо). Це єдине поле налаштувань, яке можна змінювати за допомогою ключа API.`,energyCostBadge:`Енергія`,legacyKey:`Застарілий`,legacyKeyTooltip:`Створено до отримання права власності на користувача; повторно створити, щоб використовувати доступ до хмари`,unnamedKey:`Безіменний ключ`,lastUsed:`Останнє використання`,read:`Читання`,control:`Керування`,createFirstKey:`Створити перший ключ`,webhookEndpoints:`Кінцеві точки вебхуків`,webhookApiKeyHint:`Використовуйте свій ключ API у заголовку X-API-Key.`,webhook:{getAllStatus:`Отримати весь стан принтера`,getSpecificStatus:`Отримати певний стан принтера`,addToQueue:`Додати до черги друку`,pausePrint:`Призупинити друк`,resumePrint:`Відновити друк`,stopPrint:`Зупинити друк`},apiBrowser:`Оглядач API`,apiBrowserDescription:`Переглядайте й перевіряйте всі доступні кінцеві точки API.`,apiKeyForTesting:`Ключ API для тестування`,apiKeyPlaceholder:`Вставте сюди свій ключ API, щоб перевірити автентифіковані кінцеві точки...`,apiKeyHint:`Цей ключ буде надіслано як заголовок X-API-Key із запитами.`,deleteApiKeyTitle:`Видалити ключ API`,deleteApiKeyMessage:`Ви впевнені, що хочете видалити цей ключ API? Будь-які інтеграції за допомогою цього ключа перестануть працювати.`,deleteKey:`Видалити ключ`,amsDisplayThresholds:`Пороги індикаторів AMS`,amsThresholdsDescription:`Налаштуйте колірні пороги для індикаторів вологості та температури AMS.`,humidity:`Вологість`,goodGreen:`Добре (зелений)`,fairOrange:`Задовільний (помаранчевий)`,aboveFairBad:`Значення вище задовільного порога відображається червоним (погано)`,fairAlsoDryingThreshold:`Цей поріг також використовується для запуску автоматичного сушіння, якщо його ввімкнено`,fairBelowDryingFloor:`Автоматичне сушіння не може досягти цього значення: за увімкненого нагрівача AMS показує {{floor}} % або більше, тож кожен цикл завершувався б і одразу починався знову. Встановіть значення понад {{floor}} %, якщо користуєтеся автоматичним сушінням.`,temperature:`Температура`,goodBlue:`Добре (синій)`,aboveFairHot:`Значення вище задовільного порога відображається червоним (гаряче)`,tempAlarmThreshold:`Тривога вище`,tempAlarmSeparateFromBand:`Сповіщення надсилає лише поріг тривоги — «добре» та «задовільно» тільки забарвлюють індикатор. Залиште порожнім, щоб спрацьовувати на задовільному порозі, як раніше.`,tempAlarmMustBePositive:`Поріг 0 або менший ігнорується — тривога спрацьовує на задовільному порозі.`,historyRetention:`Збереження історії`,keepSensorHistory:`Зберігати історію датчиків для`,historyRetentionDescription:`Старіші дані про вологість і температуру буде автоматично видалено`,defaultPrintOptions:`Параметри друку за умовчанням`,defaultPrintOptionsDescription:`Установіть типові значення параметрів для нових завдань друку. Їх можна змінити для окремого завдання в діалоговому вікні друку.`,defaultBedLevelling:`Вирівнювання столу`,defaultBedLevellingDesc:`Автоматичне вирівнювання столу перед друком`,defaultFlowCali:`Калібрування потоку`,defaultFlowCaliDesc:`Калібрувати потік екструзії`,defaultVibrationCali:`Калібрування вібрації`,defaultVibrationCaliDesc:`Зменшувати артефакти від вібрації`,defaultLayerInspect:`Перевірка першого шару`,defaultLayerInspectDesc:`Перевірка першого шару за допомогою ШІ`,defaultTimelapse:`Таймлапс`,defaultTimelapseDesc:`Записувати таймлапс`,defaultNozzleOffsetCali:`Калібрування зсуву сопла`,defaultNozzleOffsetCaliDesc:`Калібрувати зміщення сопел між екструдерами`,tempFanPresetsTitle:`Профілі температури та вентилятора`,tempFanPresetsDescription:`Налаштуйте значення швидкого вибору в спливних панелях температури й швидкості вентилятора на картці принтера. Кнопка «Вимкнути» відображається завжди.`,tempFanPresetsNozzle:`Температура сопла`,tempFanPresetsBed:`Температура столу`,tempFanPresetsChamber:`Температура камери`,tempFanPresetsFan:`Швидкість вентилятора`,tempFanPresetsReset:`Відновити налаштування за замовчуванням`,concurrentUploadsTitle:`Паралельні вивантаження`,concurrentUploadsDescription:`Кількість принтерів, на які черга може одночасно надсилати файли. Передавання на принтери відбувається повільно — великий файл може передаватися кілька хвилин — і кожен принтер чекає своєї черги. Для великого парку збільшення цього значення скорочує очікування останнього принтера в партії. Зменште його, якщо мережа або сервер Bambuddy не справляється з паралельними передаваннями.`,concurrentUploadsLabel:`Кількість принтерів для одночасного передавання`,concurrentUploadsHelp:`1 надсилає на один принтер за раз (стара поведінка). За замовчуванням 4.`,staggeredStart:`Поетапний запуск`,staggeredStartDescription:`Типовий розмір групи та інтервал для поетапного запуску партії на кількох принтерах. Значення можна змінити для кожної партії у вікні друку.`,preheatTitle:`Попереднє нагрівання й термовитримка`,preheatDescription:`Нагрівати стіл — і камеру, якщо це підтримується — та витримувати задану температуру перед кожним друком із черги. Це корисно для інженерних філаментів, як-от PA й ABS, на принтерах без активного нагрівача камери: стіл нагріває камеру тепловим випромінюванням, доки триває термовитримка. Цільова температура столу зчитується з файлу друку; поведінка камери залежить від моделі принтера.`,preheatEnabled:`Увімкнути попереднє нагрівання й термовитримку`,preheatEnabledDesc:`Якщо вимкнено, завдання з черги надсилаються на друк негайно. Для кожного елемента черги це налаштування можна перевизначити окремо.`,preheatFilamentTargetsLabel:`Цільова температура камери за типом філаменту (°C)`,preheatFilamentTargetsHint:`Bambuddy вибирає найвищу цільову температуру серед завантажених слотів AMS. Друк, для всіх слотів якого визначається 0 — PLA, PETG, TPU, PVA, — повністю пропускає прогрівання й починається одразу.`,preheatFilamentTargetsReset:`Відновити налаштування за замовчуванням`,preheatFilamentTargetsDefaultRow:`Інше / не зіставлене`,preheatMaxWait:`Максимальний час очікування (секунди)`,preheatMaxWaitHelp:`Максимальна тривалість нагрівання камери перед переходом до наступного етапу.`,preheatSoak:`Термовитримка (с)`,preheatSoakHelp:`Час термовитримки після досягнення цільової температури або завершення максимального часу очікування.`,preheatHardwareTitle:`Особливості за моделями принтерів:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E активно нагрівають камеру командою M141. X1C/P2S зчитують температуру камери, але покладаються на нагрівання тепловим випромінюванням від столу. P1S/P1P/A1/A1 Mini не мають датчика камери — для них застосовується лише таймер термовитримки.`,preheatPerItemDesc:`Нагрівати стіл і камеру перед початком цього друку. Типове значення успадковується з перемикача «Налаштування → Робочий процес».`,preheatOverride_inherit:`Успадкувати`,preheatOverride_on:`Увімкнено`,preheatOverride_off:`Вимкнено`,calibrationMode_off:`Вимкнено`,calibrationMode_on:`Увімкнено`,calibrationMode_auto:`Авто`,preheatTargetOverride:`Інша цільова температура камери (°C; порожньо — типове значення для філаменту)`,preheatTargetOverrideHelp:`0 нагріває стіл і виконує витримку без камери. Якщо поле порожнє, друк, якому камера не потрібна, повністю пропускає прогрівання.`,plateClear:`Підтвердження очищення друкарської пластини`,requirePlateClear:`Вимагати підтвердження очищення друкарської пластини`,requirePlateClearDescription:`Якщо ввімкнено, планувальник перед запуском наступного завдання на принтері із завершеним друком очікує підтвердження, що друкарську пластину очищено. Вимкнення також приховує індикатор стану пластини та кнопку «Позначити пластину як очищену» на картках принтерів.`,keepBedWarm:`Тримати стіл теплим між друком`,keepBedWarmDesc:`Поки очікується підтвердження очищення пластини, стіл підтримується при вказаній нижче температурі підігріву, щоб камера залишалася теплою, — або при температурі столу наступного друку, якщо вона вища. Застосовується лише коли наступний друк потребує нагрівання камери (ASA, ABS, PA, PC тощо). Потрібно увімкнути підтвердження очищення пластини.`,keepWarmBedTemp:`Температура столу для підтримання тепла (°C)`,keepWarmBedTempHelp:`Використовується, коли стіл слугує для нагрівання камери: під час підтримання тепла та під час попереднього нагріву, якщо у файлі друку немає температури столу. Вища температура з файлу друку завжди має пріоритет.`,keepWarmMaxMinutes:`Припинити підігрів через (хвилин)`,keepWarmMaxMinutesHelp:`Якщо пластину не звільнено за цей час, нагрівачі вимикаються, а не залишаються увімкненими нескінченно.`,gcodeInjection:`Вставлення G-коду`,gcodeInjectionDescription:`Налаштуйте власний G-код для вставлення на початку та/або наприкінці друку в системах автоматичного друку, як-от Farmloop, SwapMod, AutoClear і Printflow 3D. Фрагменти налаштовуються для кожної моделі принтера та застосовуються, коли для елемента черги ввімкнено «Вставляти G-код».`,gcodeInjectionNoPrinters:`Принтерів не знайдено. Додайте принтери, щоб налаштувати фрагменти G-коду.`,gcodeStartLabel:`Початковий G-код`,gcodeEndLabel:`Завершальний G-код`,gcodeStartPlaceholder:`G-код додається перед початком друку...`,gcodeEndPlaceholder:`G-код додається після завершення друку...`,staggerGroupSize:`Розмір групи`,staggerGroupSizeHelp:`Кількість принтерів, що одночасно запускаються в кожній групі`,staggerInterval:`Інтервал (хвилини)`,staggerIntervalHelp:`Затримка між стартом кожної групи`,queueDrying:`Автоматичне сушіння між завданнями черги`,queueDryingDescription:`Автоматично сушити філамент в AMS, коли принтер простоює між завданнями з черги. Сушіння запускається відповідно до заданого вище порога вологості.`,queueDryingEnabled:`Увімкнути автосушку`,queueDryingEnabledDescription:`Автоматичний запуск AMS сушіння, коли принтер неактивний і вологість перевищує порогове значення`,queueDryingBlock:`Чекати завершення сушіння`,queueDryingBlockDescription:`Не запускати завдання з черги до завершення сушіння. Якщо вимкнено, друк має пріоритет над сушінням.`,ambientDryingEnabled:`Фонове сушіння`,ambientDryingEnabledDescription:`Автоматичне сушіння філаменту на неактивних принтерах, коли вологість перевищує порогове значення, навіть без друку в черзі.`,printDryingEnabled:`Продовжувати сушіння під час друку`,printDryingEnabledDescription:`Дозволити автоматичному сушінню тривати під час друку на підтримуваному обладнанні (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L з новими версіями прошивки). Для захисту котушок температура сушіння автоматично обмежується значенням на 5 °C нижчим за профіль для режиму простою.`,dryingPresets:`Профілі сушіння`,dryingPresetsDescription:`Температура та тривалість для кожного типу філаменту. AMS 2 Pro використовує нижчі температури, AMS-HT підтримує вищі температури.`,dryingFilament:`Філамент`,humidityThresholds:`Пороги вологості`,humidityThresholdsDescription:`Пороги вологості за типом філаменту для автоматичного сушіння та попереджень. Для змішаного завантаження в одному AMS використовується найнижчий поріг.`,humidityThresholdCol:`Поріг`,humidityThresholdDefault:`За замовчуванням (невідомі типи)`,printModal:`Вікно друку`,expandCustomMapping:`Розгорнути настроюване зіставлення за умовчанням`,expandCustomMappingDescription:`Під час друку на кількох принтерах показувати розгорнуте зіставлення для кожного принтера AMS.`,authentication:`Автентифікація`,authEnabledDescription:`Ваш екземпляр захищено автентифікацією користувача`,authDisabledDescription:`Увімкніть запит входу та керування доступом користувачів`,authDisabledMessage:`Увімкніть автентифікацію, щоб створювати облікові записи користувачів, керувати дозволами та захищати свій екземпляр Bambuddy.`,enableAuthentication:`Увімкнути автентифікацію`,currentUser:`Поточний користувач`,changePassword:`Змінити пароль`,admin:`адмін`,users:`Користувачі`,addUser:`Додати користувача`,groups:`Групи`,addGroup:`Додати групу`,system:`система`,noDescription:`Без опису`,userCount:`{{count}} користувачів`,permissionCount:`Дозволи {{count}}.`,createUser:`Створити користувача`,username:`Ім’я користувача`,enterUsername:`Введіть ім’я користувача`,password:`Пароль`,enterPassword:`Введіть пароль`,passwordRequirements:`Принаймні 8 символів, один великий, один малий, одна цифра та один спеціальний символ.`,confirmPassword:`Підтвердити пароль`,confirmPasswordPlaceholder:`Підтвердити пароль`,viewReleaseOnGitHub:`Переглянути випуск на GitHub`,turnAllPlugsOn:`Увімкнути усі розетки`,turnAllPlugsOff:`Вимкнути усі розетки`,clearNotificationLogs:`Очистити журнали сповіщень`,clearLogsMessage:`Це назавжди видалить усі журнали сповіщень старше 30 днів. Цю дію не можна скасувати.`,clearLogs:`Очистити журнали`,resetUiPreferences:`Скинути налаштування UI.`,resetUiPreferencesMessage:`Це скине всі параметри UI до значень за замовчуванням: порядок бічної панелі, тему, макет інформаційної панелі, режими перегляду та параметри сортування. Це НЕ вплине на ваші принтери, архіви та налаштування сервера. Після очищення сторінка перезавантажиться.`,resetPreferences:`Скинути налаштування`,deleteGroupTitle:`Видалити групу`,deleteGroupMessage:`Ви впевнені, що хочете видалити цю групу? Користувачі цієї групи втратять ці дозволи.`,deleteGroup:`Видалити групу`,disableAuthenticationTitle:`Вимкнути автентифікацію`,disableAuthenticationMessage:`Ви впевнені, що бажаєте вимкнути автентифікацію? Це зробить ваш екземпляр Bambuddy доступним без входу. Усі користувачі залишаться в базі даних, але автентифікацію буде вимкнено.`,disableAuthentication:`Вимкнути автентифікацію`,configureBambuddy:`Налаштувати Bambuddy`,systemDefault:`Системне за замовчуванням`,archiveSettings:`Налаштування архіву`,newWindow:`Нове вікно`,embeddedOverlay:`Вбудоване накладання`,preferredSlicer:`Бажаний слайсер`,preferredSlicerDescription:`Слайсер для нарізання в застосунку через допоміжний API-сервіс`,openInSlicerLabel:`Відкрити у слайсері`,openInSlicerInherit:`Такий самий, як API-слайсер`,openInSlicerDescription:`Настільний слайсер, який відкриває кнопка «Відкрити в слайсері». Залиште «Такий самий, як API-слайсер», щоб успадкувати вибір, або виберіть інший слайсер для локального використання.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev має відомі помилки CLI, через які не вдається нарізати багато створених Bambu файлів 3MF. Див. проблеми upstream №12426 — аварійне завершення для розфарбованих файлів із кількома екструдерами — та №13386 — відхилення через сувору перевірку діапазонів параметрів. До появи виправлень upstream рекомендовано використовувати Bambu Studio.`,useSlicerApi:`Використовувати API слайсера`,useSlicerApiDescription:`Якщо ввімкнено, команда «Нарізати» відкриває вбудоване вікно слайсера й викликає допоміжний сервіс slicer-API. Якщо вимкнено — типове значення — файл передається настільному слайсеру через URI-схему.`,slicerCard:`Слайсер`,orcaslicerApiUrl:`URL допоміжного сервісу OrcaSlicer`,bambuStudioApiUrl:`URL допоміжного сервісу Bambu Studio`,slicerStallTimeout:`Тайм-аут простою слайсера (хвилини)`,slicerStallTimeoutDescription:`Перервати нарізку, якщо sidecar не повідомляє про прогрес протягом цього часу. Важкі моделі, які продовжують повідомляти про прогрес, ніколи не перериваються, скільки б часу не знадобилося. Для sidecar без звіту про прогрес це значення використовується як загальний ліміт часу.`,slicerApiUrlDescription:`URL контейнера допоміжного сервісу slicer-API. Залиште поле порожнім, щоб використовувати типові значення зі змінних середовища SLICER_API_URL / BAMBU_STUDIO_API_URL.`,externalCameras:`Зовнішні камери`,costTracking:`Відстеження витрат`,billingEnabled:`Увімкнути розрахунки`,billingEnabledDescription:`Стягувати з користувачів вартість друку та ввімкнути фінансові функції`,printerKillSwitch:`Автозупинка несанкціонованого друку`,printerKillSwitchDescription:`Негайно зупиняє друк, розпочатий без дозволу.`,financeBudgetReset:`Щомісячне скидання фінансового бюджету`,financeBudgetResetDay:`День скидання`,financeBudgetResetDayHelp:`У коротких місяцях скидання виконується в останній день місяця.`,financeBudgetResetTimezone:`Часовий пояс скидання`,financeBudgetResetTimezoneHelp:`Початок бюджетного періоду обчислюється в цьому часовому поясі.`,rebuildLedger:`Перебудувати книгу гаманця`,rebuildLedgerStarted:`Перебудову книги розпочато`,rebuildLedgerConfirmTitle:`Перебудувати книгу гаманця?`,rebuildLedgerConfirmMessage:`Книгу гаманця буде перебудовано для виправлення історичних значень балансу. Запускайте цю дію лише якщо розумієте її наслідки.`,rebuildLedgerInProgress:`Запуск перебудови...`,printsOnly:`Лише друк`,totalConsumption:`Загальне споживання`,dataManagement:`Управління даними`,storageUsage:`Використання сховища`,storageUsageDescription:`Розподіл використання даних за категоріями`,storageUsageTotal:`Всього`,storageUsageErrors:`Помилки`,storageUsageOtherBreakdown:`Інше (включає статичні ресурси, сценарії та файли конфігурації)`,storageUsageSystem:`система`,storageUsageData:`Дані`,storageUsageUnavailable:`Інформація про використання сховища недоступна`,clearNotificationLogsDescription:`Видалити журнали сповіщень старші 30 днів`,resetUiPreferencesDescription:`Скинути порядок бічної панелі, тему, режими перегляду та параметри макета. Принтери, архіви та налаштування не впливають.`,enableHomeAssistant:`Увімкнути Home Assistant`,enableMqtt:`Увімкнути MQTT`,useTls:`Використовуйте TLS`,enableMetricsEndpoint:`Увімкнути кінцеву точку показників`,availableMetrics:`Доступні показники`,editUser:`Редагувати користувача`,deleteUserTitle:`Видалити користувача`,groupName:`Назва групи`,leaveEmptyForAnonymous:`Залиште порожнім для анонімного`,leaveEmptyForNoAuth:`Залиште порожнім, щоб не було автентифікації`,enterNewPassword:`Введіть новий пароль`,confirmNewPassword:`Підтвердити новий пароль`,enterGroupName:`Введіть назву групи`,enterDescriptionOptional:`Введіть опис (необов’язково)`,enterCurrentPassword:`Введіть поточний пароль`,enterNewPasswordMin6:`Введіть новий пароль (мінімум 6 символів)`,toast:{keyCopied:`Ключ скопійовано в буфер обміну`,copyFailed:`Не вдалося скопіювати ключ`,keyAddedToBrowser:`Ключ додано в браузер API.`,clearLogsFailed:`Не вдалося очистити журнали`,uiPreferencesReset:`UI налаштування скинуто. Оновлення...`,authDisabled:`Автентифікацію успішно вимкнено`,authDisableFailed:`Не вдалося вимкнути автентифікацію`,apiKeyCreated:`Ключ API створено`,apiKeyDeleted:`Ключ API видалено`,userCreated:`Користувача створено успішно`,userUpdated:`Користувача успішно оновлено`,userDeleted:`Користувача успішно видалено`,groupCreated:`Групу створено успішно`,groupUpdated:`Групу успішно оновлено`,groupDeleted:`Групу успішно видалено`,fillRequiredFields:`Будь ласка, заповніть усі необхідні поля`,passwordsDoNotMatch:`Паролі не збігаються`,passwordTooShort:`Пароль має бути не менше 8 символів`,passwordNeedsUppercase:`Пароль має містити принаймні одну велику літеру`,passwordNeedsLowercase:`Пароль має містити принаймні одну малу літеру`,passwordNeedsDigit:`Пароль має містити хоча б одну цифру`,passwordNeedsSpecial:`Пароль повинен містити хоча б один спеціальний символ`,enterGroupName:`Будь ласка, введіть назву групи`,settingsSaved:`Налаштування збережено`,noPermissionUpdate:`Ви не маєте дозволу змінювати налаштування`,cameraSettingsSaved:`Налаштування камери збережено`,enterCameraUrl:`Будь ласка, введіть камеру URL`,passwordChanged:`Пароль успішно змінено`,connectionFailed:`Помилка підключення`,testFailed:`Тест не вдалося`,cameraConnected:`Камера підключена{{resolution}}`,cameraConnectedCoalesced:`Камера підключена{{resolution}} (спільно з уже виконуваним захопленням)`},testConnection:`Тестове підключення`,catalog:{spoolCatalog:`Каталог котушок`,spoolCatalogDescription:`Вага порожніх котушок за брендом і типом. Використовується для автоматичного пошуку ваги під час додавання котушок.`,searchCatalog:`Пошук у каталозі...`,addNewEntry:`Додати новий запис`,namePlaceholder:`Назва (наприклад, Bambu Lab - пластик)`,weight:`вага`,type:`Тип`,default:`За замовчуванням`,custom:`Власний`,noMatch:`Немає записів, що відповідають вашому пошуку`,empty:`Немає записів у каталозі`,deleteEntry:`Видалити запис`,deleteConfirm:`Ви впевнені, що хочете видалити "{{name}}"?`,resetCatalog:`Скинути каталог`,resetConfirm:`Скинути каталог до стандартних? Це видалить усі спеціальні записи.`,loadFailed:`Не вдалося завантажити каталог котушок`,nameWeightRequired:`Назва й маса обов’язкові`,entryAdded:`Запис додано`,addFailed:`Не вдалося додати запис`,entryUpdated:`Запис оновлено`,updateFailed:`Не вдалося оновити запис`,entryDeleted:`Запис видалено`,deleteFailed:`Не вдалося видалити запис`,resetSuccess:`Каталог відновлено до типових значень`,resetFailed:`Не вдалося скинути каталог`,exported:`Експортовано записів: {{count}}`,imported:`Імпортовано: {{added}}; пропущено: {{skipped}}`,importFailed:`Не вдалося імпортувати: недійсний формат JSON.`,exportTooltip:`Експортувати каталог до JSON`,importTooltip:`Імпорт каталогу з JSON`,resetTooltip:`Відновити налаштування за замовчуванням`,selectedCount:`Вибрано: {{count}}`,deleteSelected:`Видалити вибране`,bulkDeleteConfirm:`Видалити вибрані записи ({{count}})?`,bulkDeleted:`Видалено записів: {{count}}`,bulkDeleteFailed:`Не вдалося видалити записи`,material:`матеріал`,spoolWeight:`Вага котушки`,color:`Колір`,updateSpoolWeight:`Оновити вагу котушки`,filamentUpdated:`Філамент оновлено`,filamentUpdateFailed:`Не вдалося оновити філамент`,filamentUpdateInvalid:`Недійсні дані філаменту`,keepExistingSpoolWeight:`Зберегти попередню вагу для наявних котушок`,keepExistingSpoolWeightDesc:`Котушки, створені з цим типом філаменту, зберігають стару вагу тари. Нові котушки використовують оновлене значення.`,applyToAllSpools:`Застосувати до всіх котушок`,applyToAllSpoolsDesc:`Усі розрахунки ваги для цього типу філаменту одразу використовують нову вагу тари.`},colorCatalog:{title:`Каталог кольорів`,description:`Кольори філаменту за виробником і матеріалом. Використовується для автоматичного пошуку кольору під час додавання котушок.`,searchColors:`Пошук кольорів...`,allManufacturers:`Усі виробники`,addNewColor:`Додати новий колір`,manufacturer:`Виробник`,colorName:`Назва кольору`,hex:`Hex-код`,materialOptional:`Матеріал (необов’язково)`,showing:`Показано {{filtered}} із {{total}} кольорів`,noMatch:`Жоден колір не відповідає вашому запиту`,empty:`Кольори в каталозі відсутні`,deleteColor:`Видалити колір`,deleteConfirm:`Ви впевнені, що хочете видалити "{{name}}"?`,resetCatalog:`Скинути каталог кольорів`,resetConfirm:`Скинути каталог до стандартних? Це видалить усі власні кольори.`,sync:`Синхронізувати`,starting:`Запуск…`,syncTooltip:`Синхронізація з FilamentColors.xyz (2000+ кольорів, може зайняти хвилину)`,loadFailed:`Не вдалося завантажити каталог кольорів`,fieldsRequired:`Необхідно вказати виробника, назву кольору та шістнадцятковий колір`,colorAdded:`Додано колір`,addFailed:`Не вдалося додати колір`,colorUpdated:`Колір оновлено`,updateFailed:`Не вдалося оновити колір`,colorDeleted:`Колір видалено`,deleteFailed:`Не вдалося видалити колір`,resetSuccess:`Каталог кольорів відновлено до типових значень`,resetFailed:`Не вдалося скинути каталог`,syncUpToDate:`Вже оновлено (кольори {{count}} перевірено)`,syncComplete:`Додано: {{added}}; уже існувало: {{skipped}}`,syncError:`Помилка синхронізації`,syncFailed:`Не вдалося синхронізувати з FilamentColors.xyz`,exported:`Експортовано кольорів: {{count}}`,imported:`Імпортовано: {{added}}; пропущено: {{skipped}}`,importFailed:`Не вдалося імпортувати: недійсний формат JSON.`,selectedCount:`Вибрано: {{count}}`,deleteSelected:`Видалити вибране`,bulkDeleteConfirm:`Ви впевнені, що бажаєте видалити кольори {{count}}?`,bulkDeleted:`Видалено кольорів: {{count}}`,bulkDeleteFailed:`Не вдалося видалити кольори`},dateFormat:`Формат дати`,dateFormatUs:`США (MM/DD/YYYY)`,dateFormatEu:`ЄС (DD/MM/YYYY)`,dateFormatIso:`ISO (РРРР-ММ-ДД)`,timeFormat:`Формат часу`,timeFormat12:`12 годин (15:30)`,timeFormat24:`24 години (15:30)`,defaultPrinter:`Принтер за умовчанням`,defaultPrinterDescription:`Попередньо вибирати цей принтер для вивантажень, повторного друку та інших операцій.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Використовуйте бічну панель, щоб змінити порядок елементів, скинути видимість і керувати спеціальними посиланнями.`,setDefault:`Установити за замовчуванням`,sidebarOrderSetDefaultHint:`За замовчуванням застосовує поточний порядок меню до користувачів, які не налаштували свій.`,sidebarDefaultSet:`Встановлено стандартний порядок меню.`,sidebarDefaultCleared:`Порядок меню за замовчуванням видалено.`,sidebarDefaultFailed:`Не вдалося встановити порядок меню за замовчуванням.`,reset:`Скинути`,darkMode:`Темний режим`,lightMode:`Світловий режим`,active:`(активний)`,background:`Фон`,accent:`Акцент`,style:`Стиль`,bgNeutral:`Нейтральний`,bgWarm:`Теплий`,bgCool:`круто`,bgOled:`OLED Чорний`,bgSlate:`Шиферно-блакитний`,bgForest:`Зелений ліс`,accentGreen:`Зелений`,accentTeal:`Чирок`,accentBlue:`Синій`,accentOrange:`Помаранчевий`,accentPurple:`Фіолетовий`,accentRed:`Червоний`,styleClassic:`класичний`,styleGlow:`Світіння`,styleVibrant:`Яскравий`,themeToggleHint:`Перемикайтеся між темним, світлим і системним режимами за допомогою значка на бічній панелі.`,progressInTitle:`Прогрес у вкладці`,progressInTitleDescription:`Показує відсоток активного друку та кільце прогресу на вкладці браузера.`,autoArchivePrints:`Автоматично архівувати друки`,autoArchiveDescription:`Автоматично зберігати файли 3MF після завершення друку`,saveThumbnailsDescription:`Витягніть і збережіть зображення попереднього перегляду з файлів 3MF.`,captureFinishPhotoDescription:`Зробіть фотографію з камери принтера після завершення друку. Bambuddy записує короткий проміжок часу під час друку, щоб фотографію можна було отримати з моменту, коли стіл опускається; файл уповільненої зйомки зберігається, якщо ви ввімкнули уповільнену зйомку для цього друку, інакше він автоматично видаляється після зйомки фотографії.`,finishPhotoRestorePlate:`Піднімати стіл для фінального знімка`,finishPhotoRestorePlateDescription:`Після завершення друку принтер опускає стіл приблизно на 100 мм, і готова модель опиняється нижче кадру камери. Bambuddy піднімає стіл назад трохи вище останнього надрукованого шару, робить знімок і знову опускає його. Пропускається, якщо висота друку невідома або в черзі є інше завдання.`,ffmpegNotInstalled:`ffmpeg не встановлено`,ffmpegRequired:`Для зйомки камерою потрібен ffmpeg. Встановіть його за допомогою <brew>brew install ffmpeg</brew> (macOS) або <apt>apt install ffmpeg</apt> (Linux).`,camera:`Камера`,cameraViewMode:`Режим перегляду камери`,cameraOverlayDescription:`Камера відкривається в накладці зі змінним розміром на головному екрані`,cameraWindowDescription:`Камера відкривається в окремому вікні браузера`,externalCamerasDescription:`Налаштуйте зовнішні камери замість вбудованої камери принтера. Підтримує потоки MJPEG, знімки RTSP, HTTP і камери USB (V4L2). Якщо ввімкнено, зовнішня камера використовується для перегляду в реальному часі та готових фотографій.`,cameraPlaceholderUsb:`Шлях пристрою (/dev/video0)`,cameraPlaceholderUrl:`Камера URL (rtsp://... або http://...)`,cameraTypeMjpeg:`Потік MJPEG`,cameraTypeRtsp:`RTSP Потік`,cameraTypeSnapshot:`HTTP Знімок`,cameraTypeUsb:`USB Камера (V4L2)`,cameraSnapshotUrl:`URL знімка (необов’язково)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`Одиночний кадр URL використовується для ескізів сповіщень, фінішних фотографій, шарових кадрів уповільненої зйомки та виявлення пластин. Уповільнена зйомка та виявлення пластин потребують окремого перемикача для кожного принтера — це URL є лише джерелом зображення, з якого вони беруть участь, коли активні. Залиште поле порожнім для запису з прямої трансляції вище. Корисно для камер go2rtc (/api/frame.jpeg) і IP із спеціальною кінцевою точкою знімка.`,cameraRotation:`Обертання`,test:`Тест`,connected:`Підключено`,disconnected:`Відключено`,currency:`Валюта`,defaultFilamentCost:`Вартість філаменту за замовчуванням (за кг)`,electricityCost:`Вартість електроенергії за kWh`,energyDisplayMode:`Режим відображення енергії`,energyModePrintDescription:`Інформаційна панель показує суму енергії, використаної під час друку`,energyModeTotalDescription:`На приладовій панелі показано енергію від розумних розеток протягом усього терміну служби`,fileManager:`Менеджер файлів`,createArchiveEntry:`Створити архівний запис під час друку`,createArchiveEntryDescription:`Під час друку з диспетчера файлів можна додатково створити запис архіву`,lowDiskSpaceWarning:`Попередження про брак місця на диску`,lowDiskSpaceDescription:`Показувати попередження, коли вільний простір на диску стає нижче цього порогу`,printerFirmware:`Прошивка принтера`,checkFirmwareDescription:`Перевірте наявність оновлень прошивки принтера від Bambu Lab`,bambuddySoftware:`Bambuddy Програмне забезпечення`,autoCheckDescription:`Автоматично перевіряти наявність нових версій під час запуску`,checkNow:`Перевір зараз`,updateAvailableVersion:`Доступне оновлення: v{{version}}`,releaseNotes:`Примітки до випуску`,updateViaDocker:`Оновити через Docker Написати:`,composeDirectory:`Каталог Compose`,composeDirectoryHint:`Каталог із вашим docker-compose.yml. Залиште порожнім, щоб не додавати cd.`,copyUpdateCommand:`Скопіювати команду оновлення`,updateViaHomeAssistant:`Оновленнями керує супервізор Home Assistant. Відкрийте «Налаштування» → «Додатки» → Bambuddy у Home Assistant, щоб установити нову версію.`,updateViaWindowsInstaller:`Інсталяції Windows оновлюються шляхом повторного запуску інсталятора. Завантажте нову версію нижче — ваші дані, налаштування та принтери збережуться.`,downloadWindowsInstaller:`Завантажити інсталятор для v{{version}}`,installUpdate:`Встановити оновлення`,latestVersionRunning:`Ви використовуєте останню версію`,failedToCheckUpdates:`Не вдалося перевірити наявність оновлень: {{error}}`,backupRestore:`Резервне копіювання та відновлення`,backupRestoreDescription:`Експорт /import налаштувань і конфігурація GitHub резервного копіювання`,goToBackup:`Перейдіть до Резервного копіювання`,externalUrl:`Зовнішній URL`,externalUrlDescription:`Зовнішній URL, де Bambuddy доступний. Використовується для зображень сповіщень і зовнішньої інтеграції.`,bambuddyUrl:`Bambuddy URL`,externalUrlHint:`Включити протокол і порт (наприклад, http://192.168.1.100:8000)`,ftpRetry:`FTP Спробуйте ще раз`,ftpRetryDescription:`Повторювати операції FTP за ненадійного Wi-Fi принтера. Застосовується до завантаження 3MF і таймлапсів, вивантаження завдань друку та оновлення прошивки.`,autoRetryDescription:`Автоматично повторити невдалі операції FTP.`,retryAttempts:`Повторні спроби`,retryDelay:`Затримка повторної спроби`,connectionTimeout:`Час очікування підключення`,time_one:`час {{count}}.`,time_other:`{{count}} разів`,second_one:`{{count}} секунда`,second_other:`{{count}} секунд`,nSeconds:`{{count}} секунд`,increaseForWeakWifi:`Підвищення для принтерів із слабким WiFi`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Підключіться до Home Assistant, щоб керувати розумними розетками через REST API HA. Підтримує об’єкти switch, light, input_boolean і script.`,homeAssistantUrl:`Home Assistant URL`,longLivedAccessToken:`Довгостроковий токен доступу`,haTokenHint:`Створіть токен у HA: Профіль → Довгострокові токени доступу → Створити токен`,connectionSuccessful:`Підключення успішне`,connectionFailed:`Збій підключення`,haConnectionSuccess:`Успішно підключено до Home Assistant.`,haConnectionFailed:`Не вдалося підключитися до Home Assistant.`,mqttPublishing:`MQTT Видавництво`,mqttDescription:`Публікуйте події BamBuddy зовнішньому брокеру MQTT для інтеграції з Node-RED, Home Assistant та іншими системами автоматизації.`,mqttEnableDescription:`Публікувати події зовнішньому MQTT брокеру`,brokerHostname:`Ім’я хоста брокера`,port:`Порт`,usernameOptional:`Ім’я користувача (необов’язково)`,passwordOptional:`Пароль (необов’язково)`,topicPrefix:`Префікс теми`,topicPrefixHint:`Теми будуть: {{prefix}}/printers/<serial>/status тощо.`,prometheusMetrics:`Prometheus Метрики`,prometheusEndpointDescription:`Показати показники принтера на <code>/api/v1/metrics</code> для моніторингу Prometheus/Grafana.`,bearerTokenOptional:`Токен Bearer (необов’язково)`,bearerTokenHint:`Якщо встановлено, запити мають містити <code>Авторизація: носій <token></code>`,metricsConnectionStatus:`Статус підключення`,metricsPrinterState:`Стан принтера (неактивний /printing/etc)`,metricsPrintProgress:`Прогрес друку 0-100%`,metricsBedTemp:`Температура столу`,metricsNozzleTemp:`Температура сопла`,metricsPrintsTotal:`Загальна кількість друків за результатами`,metricsMore:`...і багато іншого (шари, вентилятори, черга, використання філаментів)`,smartPlugsDescription:`Підключіть розумні розетки (Tasmota або Home Assistant), щоб автоматизувати керування живленням і відстежувати споживання електроенергії вашими принтерами.`,allOn:`Все включено`,allOff:`Все вимкнено`,addSmartPlug:`Додати розумну розетку`,energySummary:`Відновити енергетики`,currentPower:`Поточна потужність`,plugsOnline:`Розумні розетки в мережі: {{reachable}}/{{total}}`,today:`Сьогодні`,yesterday:`вчора`,total:`Всього`,enablePlugsForSummary:`Увімкніть розетки, щоб переглянути підсумок енергії`,addNotificationProvider:`додати`,systemBadge:`(Система)`,creating:`Створення...`,changing:`Зміна...`,deleteUserAndItems:`Видалити користувача ТА його елементи`,deleteUserKeepItems:`Видалити користувача, зберегти елементи (стати без власника)`,ok:`добре`,twoFa:{totpTitle:`Програма Authenticator (TOTP)`,totpDesc:`Використовуйте програму автентифікації, наприклад Google Authenticator Aegis або Authy.`,emailOtpTitle:`Одноразовий код електронною поштою`,emailOtpDesc:`Надішліть одноразовий код на {{email}} під час входу.`,emailOtpNoEmail:`Щоб увімкнути цей метод, додайте адресу електронної пошти до свого облікового запису.`,addEmailFirst:`У вашому обліковому записі немає адреси електронної пошти. Попросіть адміністратора додати її, перш ніж вмикати одноразові коди електронною поштою.`,setupTotp:`Налаштувати додаток Authenticator`,setupAuthApp:`Налаштувати додаток Authenticator`,setupInstructions:`Відскануйте наведений нижче QR-код за допомогою програми автентифікації, а потім підтвердьте кодом.`,manualEntry:`Не можете сканувати? Введіть цей секрет вручну:`,scannedContinue:`Код відскановано — продовжити`,enterCodeToConfirm:`Введіть 6-значний код із програми автентифікації, щоб підтвердити налаштування.`,activate:`Активувати`,disableTotp:`Вимкнути автентифікатор`,disableConfirmHint:`Введіть дійсний код TOTP або резервний код, щоб вимкнути автентифікатор.`,totpDisabled:`Програму Authenticator вимкнено.`,emailOtpEnabled:`Одноразові коди електронною поштою ввімкнено.`,emailOtpDisabled:`Одноразові коди електронною поштою вимкнено.`,smtpRequired:`Спочатку налаштуйте та перевірте параметри SMTP.`,invalidCode:`Невірний код. Спробуйте ще раз.`,enableEmailOtp:`Увімкнути одноразові коди електронною поштою`,disableEmailOtp:`Вимкнути одноразові коди електронною поштою`,emailSetupEnterCode:`Код підтвердження надіслано на вашу адресу електронної пошти. Введіть його нижче, щоб підтвердити доступ до цієї поштової скриньки.`,verifyAndEnable:`Перевірити й увімкнути`,emailDisablePasswordHint:`Введіть пароль свого облікового запису, щоб підтвердити вимкнення OTP електронної пошти.`,passwordPlaceholder:`Введіть свій пароль`,backupCodesTitle:`Зберегти резервні коди`,backupCodesWarning:`Збережіть ці коди в безпечному місці. Кожен код можна використати лише один раз, і він більше не відображатиметься.`,backupCodesRemaining:`Залишилося резервних кодів: {{count}}`,savedCodes:`Я зберіг свої коди`,regenBackup:`Створити нові резервні коди`,regenBackupHint:`Введіть поточний код TOTP, щоб створити 10 нових резервних кодів. Усі існуючі резервні коди стануть недійсними.`,newBackupCodes:`Нові резервні коди`,linkedAccounts:`Пов’язані облікові записи SSO.`,linkedAccountsDesc:`Ці зовнішні постачальники ідентифікаційної інформації пов’язані з вашим обліковим записом.`,oidcUnlinked:`Обліковий запис від’єднано.`},sessionPolicy:{title:`Політика сеансу`,description:`Максимальна тривалість сеансу для входу нових користувачів. Уже випущені токени зберігають початковий термін дії.`,preset24h:`24 години`,preset7d:`7 днів`,preset30d:`30 днів`,customHoursLabel:`Тривалість користувацького сеансу в годинах`,hoursSuffix:`години`,warning:`Довші сеанси знижують захист від автоматичного виходу. Рекомендовано лише для надійних розгортань для одного користувача.`},oidc:{title:`Постачальники SSO / OIDC`,desc:`Налаштуйте постачальників OpenID Connect, щоб дозволити єдиний вхід через зовнішніх постачальників ідентифікації.`,addProvider:`Додати постачальника`,newProvider:`Новий постачальник`,empty:`Постачальників OIDC ще не налаштовано.`,created:`Постачальник створено.`,updated:`Постачальника оновлено.`,deleted:`Постачальника видалено.`,refreshIcon:`Значок оновлення`,removeIcon:`Видалити значок`,iconRefreshed:`Значок оновлено.`,iconRemoved:`Значок видалено.`,iconFetchFailed:`Не вдалося отримати значок за URL постачальника.`,deleteTitle:`Видалити постачальника`,deleteMessage:`Видалити «{{name}}»? Усі пов’язані облікові записи користувачів буде від’єднано.`,form:{name:`Відображуване ім’я`,issuerUrl:`URL емітента`,clientId:`ID клієнта`,clientSecret:`Секрет клієнта`,scopes:`Області доступу`,iconUrl:`URL значка (необов’язково)`,enabled:`Увімкнено`,autoCreate:`Автоматичне створення користувачів`,autoCreateDesc:`Автоматично створювати локальний обліковий запис під час першого входу.`,autoLink:`Автоматичне пов’язування наявних облікових записів`,autoLinkDesc:`Автоматично пов’язувати наявні локальні облікові записи за збігом адреси електронної пошти під час першого входу.`,secretHint:`залиште порожнім, щоб зберегти поточне значення`,secretPlaceholder:`новий секрет`,emailClaim:`Поле електронної пошти`,emailClaimDesc:`Поле JWT, що використовується як адреса електронної пошти. Для Azure Entra ID, який не надсилає email_verified, використовуйте preferred_username або upn. Указуйте лише назви надійних полів.`,emailClaimPlaceholder:`email`,emailClaimCustomClaimAutoLinkWarning:`Власне поле можна безпечно використовувати для автоматичного пов’язування, лише якщо його значенням керує адміністратор організації, наприклад upn або preferred_username в Azure Entra ID. Не вмикайте автоматичне пов’язування, якщо IdP дозволяє користувачам самостійно задавати це поле.`,requireEmailVerified:`Вимагати підтвердження електронної пошти`,requireEmailVerifiedDesc:`Приймати поле електронної пошти лише тоді, коли постачальник позначив адресу як підтверджену.`,requireEmailVerifiedWarning:`Попередження: адресу електронної пошти буде прийнято навіть без підтвердження. Використовуйте це лише з надійними постачальниками.`,requireEmailVerifiedAutoLink:`Щоб змінити це налаштування, спочатку вимкніть автоматичне пов’язування.`,defaultGroup:`Група за замовчуванням`,defaultGroupDesc:`Група, яку призначають автоматично створеним користувачам. Якщо її не задано, використовується група «Глядачі».`,defaultGroupViewersFallback:`Глядачі (за замовчуванням)`,autologin:`Автовхід`,autologinDesc:`Одразу перенаправляти неавтентифікованих відвідувачів до цього постачальника. Автоматичний вхід можна ввімкнути лише для одного постачальника.`}},encryption:{title:`Стан шифрування MFA`,enabledFromEnv:`Шифрування даних у сховищі ввімкнено — ключ отримано зі змінної середовища MFA_ENCRYPTION_KEY`,enabledFromFile:`Шифрування даних у сховищі ввімкнено — ключ завантажено з каталогу даних`,enabledGenerated:`Шифрування даних у сховищі ввімкнено з автоматично створеним ключем`,notConfigured:`Шифрування даних у сховищі не налаштовано`,notConfiguredDesc:`Секрети TOTP і client_secret постачальників OIDC зберігаються як відкритий текст. Установіть MFA_ENCRYPTION_KEY або перезапустіть Bambuddy з доступним для запису каталогом даних, щоб ключ було створено автоматично.`,allEncrypted:`Усі секрети MFA зашифровано у сховищі.`,legacyRowsLabel:`Застарілі рядки відкритого тексту`,encryptedRowsLabel:`Зашифровані рядки`,legacyRowsWarning:`Виявлено незашифрованих застарілих записів: {{count}}. Повторно збережіть постачальника OIDC або заново зареєструйте застосунок автентифікації користувача, щоб перенести дані до зашифрованого сховища.`,backupHint:`Автоматично згенерований ключ зберігається в DATA_DIR/.mfa_encryption_key і включено до локальних резервних ZIP-файлів. Зберігайте свої резервні копії в безпеці або явно встановіть MFA_ENCRYPTION_KEY.`,decryptionBrokenTitle:`Відсутній ключ шифрування`,decryptionBrokenError:`Не вдається розшифрувати записів: {{count}}, оскільки ключ шифрування більше недоступний. Для відновлення поверніть попередній MFA_ENCRYPTION_KEY або DATA_DIR/.mfa_encryption_key.`,migrationErrorWarning:`{{count}} застарілих рядків не вдалося повторно зашифрувати під час запуску. Перевірте журнали сервера та перезапустіть Bambuddy, щоб повторити спробу.`},pipelineLimits:{title:`Межі конвеєра слайсера`,maxCopiesLabel:`Максимальна кількість копій за один запуск`,maxCopiesDesc:`Верхня межа копій, які оператори можуть запитувати під час запуску конвеєра. Обмеження на стороні сервера становить 1000.`},pipelines:{title:`Конвеєри слайсера`,subtitle:`Багаторазові набори профілів — принтер, процес, філаменти й тип столу. Збережіть набір у вікні нарізання та застосовуйте його до наступного файлу одним натисканням.`,loading:`Завантаження конвеєрів…`,loadError:`Не вдалося завантажити конвеєри.`,confirmDelete:`Видалити цей конвеєр? Це неможливо скасувати.`,staleWarning:`Одного або кількох пов’язаних профілів більше не існує. Щоб виправити це, повторно збережіть конвеєр у вікні нарізання.`,empty:{title:`Конвеєрів ще немає.`,howto:`Відкрийте вікно нарізання для будь-якого файлу, виберіть принтер, процес, філаменти й тип столу, а потім натисніть «Зберегти як конвеєр». Збережені конвеєри з’являться тут.`},field:{name:`Назва конвеєра`,description:`опис`,targetPrinter:`Цільовий принтер`,noTarget:`— Немає цілі —`,targetKind:`Цільовий тип`,targetKindSpecific:`Конкретний принтер`,targetKindClass:`Клас принтера`,targetModelClass:`Модель принтера`,fanoutStrategy:`Стратегія розподілу`,fanout:{max_parallel:`Максимально паралельно — розподіляти між усіма відповідними вільними принтерами`,round_robin:`По колу — почергово використовувати відповідні принтери`,fill_one_first:`Спочатку один принтер — призначити всі копії одному принтеру`},fanoutShort:{max_parallel:`паралельний`,round_robin:`по колу`,fill_one_first:`спочатку один`}},action:{save:`зберегти`,cancel:`Скасувати`,rename:`Перейменувати`,delete:`Видалити`},slot:{printer:`Принтер`,process:`процес`,filament:`Філамент`,filamentN:`Філамент {{n}}`,filamentAll:`Усі {{n}} слотів`,bed:`Стіл`},group:{profiles:`Профілі`,filaments:`філаменти`},searchPlaceholder:`Шукати конвеєри…`,filterTargetType:`Фільтрувати за типом цілі`,filterTarget:`Фільтрувати за ціллю`,filter:{all:`Всі цілі`,noTarget:`Ціль не встановлена`,count:`{{shown}} / {{total}}`,noMatches:`Жоден конвеєр не відповідає поточним фільтрам.`},toast:{saved:`Конвеєр збережено`,saveFailed:`Не вдалося зберегти`,deleted:`Конвеєр видалено`,deleteFailed:`Не вдалося видалити`},noTargetHint:`Щоб запустити конвеєр, виберіть цільовий принтер`,noTargetWarning:`Перед запуском цього конвеєра встановіть цільовий принтер.`,runs:{lastRun:`Останній запуск`,status:{queued:`в черзі`,slicing:`нарізка`,dispatching:`надсилання`,in_progress:`друк`,completed:`завершено`,failed:`не вдалося`,partial_failure:`частково невдало`,cancelled:`скасовано`}}}},notification:{printStarted:{title:`Друк розпочато`,body:`{{printer}}: розпочато друк {{filename}}`},printCompleted:{title:`Друк завершено`,body:`{{printer}}: {{filename}} завершено успішно`},printFailed:{title:`Помилка друку`,body:`{{printer}}: не вдалося надрукувати {{filename}}`},printStopped:{title:`Друк зупинено`,body:`{{printer}}: {{filename}} було зупинено`},printProgress:{title:`Перебіг друку`,body:`{{printer}}: {{filename}} виконано {{percent}}%.`},printerOffline:{title:`Принтер не в мережі`,body:`{{printer}} не в мережі`},printerError:{title:`Помилка принтера`,body:`{{printer}}: {{error}}`},filamentLow:{title:`Закінчується філамент`,body:`{{printer}}: філамент майже закінчився`},maintenanceDue:{title:`Технічне обслуговування`,body:`{{printer}}: потрібна увага — {{items}}`}},errors:{generic:`Щось пішло не так`,networkError:`Помилка мережі. Перевірте підключення.`,notFound:`Не знайдено`,unauthorized:`Доступ не авторизовано`,serverError:`Помилка сервера`,validationError:`Перевірте введені дані`,printerConnectionFailed:`Не вдалося підключитися до принтера`,saveFailed:`Не вдалося зберегти зміни`,deleteFailed:`Не вдалося видалити`,loadFailed:`Не вдалося завантажити дані`},hmsErrors:{title:`Помилки - {{name}}`,noErrors:`Помилок немає`,viewOnWiki:`Переглянути на Bambu Lab Wiki`,mqttVerifyFailedRemedy:`Увімкніть режим розробника на принтері, перезавантажте принтер і запустіть завдання знову.`,unknownCode:`Невідомий код HMS — подробиці дивіться у вікі Bambu Lab.`,clearInstructions:`Усуньте помилки на принтері, щоб вони зникли тут.`,clearErrors:`Очистити помилки`,clearSuccess:`Помилки HMS видалено`,clearFailed:`Не вдалося видалити помилки HMS`,actionSuccess:`Команду надіслано принтеру`,actionFailed:`Не вдалося надіслати дію`,runoutExpectedSlot:`Філамент закінчився в {{ranOut}}. Тепер принтер очікує сумісний філамент у {{expected}}. Вставте котушку в {{expected}}, а потім виберіть «Повторити».`,runoutExpectedSlotOnly:`Принтер очікує сумісний філамент у {{expected}}. Вставте туди котушку, а потім виберіть «Повторити».`,runoutSlotUnknown:`Філамент закінчився, тому друк призупинено. Bambuddy не може визначити, якого слота тепер очікує принтер — перевірте екран принтера.`,actions:{RESUME_PRINTING:`Відновити друк`,RESUME_PRINTING_DEFECTS:`Відновити (допустимі недоліки)`,RESUME_PRINTING_PROBELM_SOLVED:`Відновити (проблему вирішено)`,STOP_PRINTING:`Зупинити друк`,CHECK_ASSISTANT:`Перевірити помічника`,FILAMENT_EXTRUDED:`Філамент екструдовано — продовжити`,RETRY_FILAMENT_EXTRUDED:`Ще не екструдовано — повторити`,CONTINUE:`Готово, продовжити`,LOAD_VIRTUAL_TRAY:`Завантажити філамент`,OK_BUTTON:`OK`,FILAMENT_LOAD_RESUME:`Філамент завантажено, відновити`,JUMP_TO_LIVEVIEW:`Перейти до перегляду наживо`,NO_REMINDER_NEXT_TIME:`Більше не нагадувати`,REFRESH_NOZZLE:`Перевірити знову`,IGNORE_NO_REMINDER_NEXT_TIME:`Ігнорувати. Не нагадувати наступного разу`,IGNORE_RESUME:`Ігнорувати й відновити друк`,PROBLEM_SOLVED_RESUME:`Проблему вирішено — відновити друк`,TURN_OFF_FIRE_ALARM:`Зрозуміло, вимкнути пожежну сигналізацію`,RETRY_PROBLEM_SOLVED:`Повторити (проблему вирішено)`,CANCLE:`Скасувати`,STOP_DRYING:`Зупинити сушіння`,PROCEED:`Продовжити`,OK_JUMP_RACK:`OK`,ABORT:`Перервати`,DISABLE_PURIFICATION:`Вимкнути очищення для цього друку`,DONT_REMIND_NEXT_TIME:`Більше не нагадувати`,DBL_CHECK_CANCEL:`Скасувати`,DBL_CHECK_DONE:`Готово`,DBL_CHECK_RETRY:`Повторити`,DBL_CHECK_RESUME:`Відновити`,DBL_CHECK_OK:`Підтвердити`,REMOVE_CLOSE_BTN:`Закрити`}},mqttDebug:{title:`Журнал налагодження MQTT`,searchPlaceholder:`Шукати тему або корисне навантаження…`,noMessages:`Ще не зареєстровано жодного повідомлення`,startLoggingHint:`Натисніть «Почати журналювання», щоб розпочати запис MQTT повідомлень`,noMessagesMatch:`Жодне повідомлення не відповідає вашому фільтру`,adjustFilterHint:`Спробуйте змінити критерії пошуку або фільтра`,incoming:`Вхідні`,outgoing:`Вихідні`,loggingStopped:`Запис припинено`,loggingActive:`Логування активне – повідомлення автоматично оновлюватимуться`,startLogging:`Розпочати журналювання`,stopLogging:`Зупинити журналювання`,clearLog:`Очистити журнал`,topic:`Тема`,timestamp:`Мітка часу`,direction:`Напрямок`,all:`Усі`},printerFiles:{zipStarted_one:`Розпочато завантаження ZIP для {{count}} файлу`,zipStarted_other:`Розпочато завантаження ZIP для {{count}} файлів`,zipPartial:`Розпочато завантаження ZIP із {{successful}} з {{total}} файлів; решту отримати не вдалося`,downloadFailed:`Помилка завантаження: {{error}}`,unknownError:`Невідома помилка`,shiftSelectHint:`Клацніть із Shift, щоб вибрати діапазон`,selectFile:`Вибрати {{name}}`,deselectFile:`Зняти вибір із {{name}}`,title:`Менеджер файлів`,storageUsed:`Використовується:`,storageFree:`Вільно:`,filterPlaceholder:`Фільтр файлів...`,deleteButton:`Видалити`,deleteFiles:`Видалити файли {{count}}.`,deleteFileConfirm:`Видалити "{{name}}"? Це неможливо скасувати.`,deleteFilesConfirm:`Видалити вибрані файли {{count}}? Це неможливо скасувати.`,noFiles:`Немає файлів на принтері`,printerUnavailable:`Файлова служба принтера недоступна. Повторіть спробу, коли принтер буде доступний.`,loadingFiles:`Завантаження файлів...`,failedToLoad:`Не вдалося завантажити файли`,toast:{filesDeleted:`Видалено файлів: {{count}}`,deleteFailed:`Не вдалося видалити: {{error}}`}},confirm:{delete:`Ви впевнені, що хочете це видалити?`,unsavedChanges:`У вас є незбережені зміни. Ви впевнені, що хочете піти?`,clearQueue:`Ви впевнені, що бажаєте очистити чергу?`},login:{title:`Вхід у Bambuddy`,subtitle:`Увійти у свій обліковий запис`,username:`Ім’я користувача`,usernamePlaceholder:`Введіть своє ім’я користувача`,usernameOrEmail:`Ім’я користувача або електронна пошта`,usernameOrEmailPlaceholder:`Ім’я користувача або електронна пошта`,password:`Пароль`,passwordPlaceholder:`Введіть свій пароль`,signIn:`Увійти`,signingIn:`Вхід...`,rememberMe:`Запам’ятати мене`,forgotPassword:`Забули пароль?`,autologinFailed:`Помилка автоматичного входу SSO. Щоб продовжити, виберіть постачальника нижче.`,localDisabledNotice:`Локальний вхід вимкнено. Використовуйте одного з наведених нижче постачальників SSO.`,loginSuccess:`Успішно ввійшли`,loginFailed:`Помилка входу`,enterCredentials:`Будь ласка, введіть ім’я користувача та пароль`,enterEmail:`Будь ласка, введіть адресу електронної пошти`,oidcLoginFailed:`Не вдалося ввійти через OIDC`,oidcErrors:{providerError:`Постачальник ідентифікації повернув помилку`,missingParameters:`У зворотному виклику OIDC відсутні необхідні параметри`,invalidState:`Стан OIDC недійсний або вже використовувався`,stateExpired:`OIDC сеанс входу закінчився — спробуйте ще раз`,providerNotFound:`OIDC постачальника не знайдено`,discoveryFailed:`Не вдалося отримати документ конфігурації OIDC`,invalidDiscovery:`Документ конфігурації OIDC недійсний`,networkError:`Помилка мережі під час обміну токена OIDC`,badResponse:`Неочікувана відповідь під час обміну токеном OIDC.`,noIdToken:`Постачальник OIDC не повернув ID-токен`,validationFailed:`Не вдалося перевірити токен OIDC`,nonceMismatch:`Не збігається nonce OIDC — можлива атака повторного використання`,missingSubClaim:`У токені OIDC відсутнє поле sub`,noLinkedAccount:`Із цим ідентифікатором OIDC не пов’язано жодного локального облікового запису`,accountInactive:`Ваш акаунт неактивний`,userResolutionFailed:`Не вдалося визначити ваш обліковий запис`,internalError:`Під час входу в систему OIDC сталася внутрішня помилка`,tokenExchangeFailed:`Помилка обміну токеном OIDC.`},forgotPasswordTitle:`Забули пароль`,forgotPasswordMessage:`Якщо ви забули свій пароль, зверніться до системного адміністратора, щоб скинути його.`,forgotPasswordEmailMessage:`Введіть адресу електронної пошти, і ми надішлемо вам новий пароль.`,emailAddress:`Адреса електронної пошти`,emailPlaceholder:`your.email@example.com`,cancel:`Скасувати`,sending:`Надсилання...`,sendResetEmail:`Надіслати лист для скидання пароля`,howToReset:`Як скинути пароль:`,resetStep1:`Зверніться до адміністратора Bambuddy.`,resetStep2:`Попросіть скинути ваш пароль у розділі «Керування користувачами»`,resetStep3:`Вони можуть встановити для вас новий тимчасовий пароль`,resetStep4:`Увійдіть із новим паролем і змініть його в налаштуваннях`,gotIt:`Зрозуміло`,resetPassword:{title:`Встановити новий пароль`,subtitle:`Введіть і підтвердьте свій новий пароль нижче.`,newPassword:`Новий пароль`,newPasswordPlaceholder:`Мінімум 8 символів`,confirmPassword:`Підтвердити пароль`,confirmPasswordPlaceholder:`Повторіть новий пароль`,saving:`Збереження…`,submit:`Встановити новий пароль`,backToLogin:`Назад до входу`,passwordsDoNotMatch:`Паролі не збігаються`,passwordTooShort:`Пароль має бути не менше 8 символів`,resetFailed:`Помилка скидання пароля. Можливо, термін дії посилання закінчився.`},twoFA:{title:`Двофакторна автентифікація`,subtitle:`Ваш обліковий запис захищено 2FA. Введіть код підтвердження нижче.`,methodAuthenticator:`Програма автентифікатора`,methodEmail:`Код електронної пошти`,methodBackup:`Резервний код`,instructionsTotp:`Відкрийте програму автентифікації та введіть 6-значний код для Bambuddy.`,instructionsEmail:`На вашу електронну адресу надіслано 6-значний код. Термін дії закінчується через 10 хвилин.`,instructionsEmailNotSent:`Натисніть кнопку нижче, щоб отримати код підтвердження електронною поштою.`,instructionsBackup:`Введіть один із ваших 8-символьних резервних кодів відновлення. Кожен код можна використати лише один раз.`,sendCodeButton:`Надіслати код електронною поштою`,sendingCode:`Надсилання...`,resendCode:`Повторно надіслати код`,codeLabel:`Код підтвердження`,backupCodeLabel:`Резервний код`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Підтвердити`,verifyingButton:`Перевірка...`,backToLogin:`← Назад до входу`,orContinueWith:`або продовжити`,signInWith:`Увійти за допомогою {{provider}}`,enterCode:`Будь ласка, введіть код підтвердження`,sendCodeFailed:`Не вдалося надіслати код підтвердження`,invalidCode:`Невірний код. Спробуйте ще раз.`}},setup:{title:`Налаштування Bambuddy`,subtitle:`Налаштуйте автентифікацію для свого екземпляра Bambuddy.`,enableAuth:`Увімкнути автентифікацію`,adminAccount:`Обліковий запис адміністратора`,adminAccountDesc:`Якщо користувачі-адміністратори вже існують, автентифікацію буде ввімкнено за допомогою наявних облікових записів адміністраторів. Залиште поля нижче порожніми, щоб використовувати наявних адміністраторів, або введіть нові облікові дані, щоб створити нового користувача адміністратора.`,adminUsername:`Ім’я користувача адміністратора`,adminPassword:`Пароль адміністратора`,optionalIfAdminExists:`(необов’язково, якщо є користувачі з правами адміністратора)`,adminUsernamePlaceholder:`Введіть ім’я користувача адміністратора (необов’язково)`,adminPasswordPlaceholder:`Введіть пароль адміністратора (необов’язково)`,confirmPassword:`Підтвердити пароль`,confirmPasswordPlaceholder:`Підтвердити пароль адміністратора`,settingUp:`Налаштування...`,completeSetup:`Завершити налаштування`,toast:{authEnabledAdminCreated:`Увімкнено автентифікацію та створено адміністратора`,authEnabledExistingAdmins:`Увімкнено автентифікацію за допомогою наявних користувачів адміністратора`,setupCompleted:`Налаштування завершено`,enterBothCredentials:`Будь ласка, введіть ім’я користувача та пароль адміністратора або залиште обидва поля порожніми, щоб використовувати наявних користувачів адміністратора`,passwordsDoNotMatch:`Паролі не збігаються`,passwordTooShort:`Пароль має бути не менше 6 символів`}},changePassword:{title:`Змінити пароль`,currentPassword:`Поточний пароль`,currentPasswordPlaceholder:`Введіть поточний пароль`,newPassword:`Новий пароль`,newPasswordPlaceholder:`Введіть новий пароль (мінімум 6 символів)`,confirmPassword:`Підтвердити новий пароль`,confirmPasswordPlaceholder:`Підтвердити новий пароль`,passwordsDoNotMatch:`Паролі не збігаються`,passwordTooShort:`Пароль має бути не менше 6 символів`,changing:`Зміна...`,success:`Пароль успішно змінено`,failed:`Не вдалося змінити пароль`},plateAlert:{title:`Друк призупинено!`,message:`Об’єкти, виявлені на будівельній пластині. Друк було автоматично призупинено. Очистіть пластину та відновіть друк.`,understand:`Я розумію`},camera:{title:`Вид з камери`,invalidPrinterId:`Недійсний ідентифікатор принтера`,live:`Наживо`,snapshot:`знімок`,restartStream:`Перезапустити потік`,refreshSnapshot:`Оновити знімок`,fullscreen:`Повний екран`,exitFullscreen:`Вийти з повноекранного режиму`,connectingToCamera:`Підключення до камери...`,capturingSnapshot:`Зйомка знімка...`,connectionLost:`З’єднання втрачено`,connectionFailed:`Помилка підключення камери`,reconnecting:`Повторне підключення через {{countdown}}с... (спроба {{attempt}}/{{max}})`,reconnectNow:`Повторно підключіться зараз`,cameraUnavailable:`Камера недоступна`,cameraUnavailableDesc:`Переконайтеся, що принтер увімкнено та підключено.`,noCamera:`Камера недоступна`,retry:`Повторити`,cameraStream:`Потік камери`,zoomOut:`Зменшити масштаб`,zoomIn:`Збільшити`,resetZoom:`Скинути масштаб`,recording:`Запис`,startRecording:`Почати запис`,stopRecording:`Зупинити запис`,chamberLight:`Перемкнути освітлення камери`,unavailable:`Камера недоступна`,diagnose:{button:`Діагностувати`,modalTitle:`Діагностика камери`,running:`Виконується діагностика...`,runFailed:`Не вдалося запустити діагностику: {{error}}`,retry:`Запустити знову`,stage:{tcp_reachable:`Доступність мережі`,first_frame:`Захоплення кадру`,live_stream_active:`Активна пряма трансляція`},summary:{all_ok:`Камера працює. Діагностика пройшла всі етапи успішно.`,live_stream_active_healthy:`Камера зараз транслює з останніми кадрами — перевірка не потрібна.`,printer_unreachable:`Принтер недоступний. Перевірте адресу IP, підключення до мережі та чи принтер увімкнено.`,camera_port_closed:`Принтер доступний, але порт камери закритий. Переконайтеся, що в налаштуваннях принтера ввімкнено лише режим LAN і режим розробника.`,no_frame:`Підключено до камери, але кадри не отримано. Повторіть спробу або перевірте, чи камеру ввімкнено в налаштуваннях принтера.`,unknown_failure:`Не вдалося діагностувати камеру з невідомої причини. Подробиці перевірте в журналі підтримки.`},meta:{protocol:`Протокол`,port:`Порт`,profile:`Профіль`}}},groups:{title:`Керування групами`,subtitle:`Керуйте групами дозволів для контролю доступу`,backToSettings:`Назад до налаштувань`,createGroup:`Створити групу`,noPermission:`Ви не маєте дозволу на доступ до цієї сторінки.`,system:`система`,noDescription:`Без опису`,usersCount:`{{count}} користувачів`,permissionsCount:`Дозволів: {{count}}`,edit:`Редагувати`,delete:`Видалити`,toast:{created:`Групу створено успішно`,updated:`Групу успішно оновлено`,deleted:`Групу успішно видалено`,enterGroupName:`Будь ласка, введіть назву групи`},modal:{editGroup:`Редагувати групу`,createGroup:`Створити групу`,cancel:`Скасувати`,saving:`Збереження...`,creating:`Створення...`,saveChanges:`Зберегти зміни`},form:{groupName:`Назва групи`,groupNamePlaceholder:`Введіть назву групи`,systemGroupWarning:`Назви системних груп не можна змінювати`,description:`опис`,descriptionPlaceholder:`Введіть опис (необов’язково)`,permissions:`Дозволи (вибрано {{count}})`},deleteModal:{title:`Видалити групу`,message:`Ви впевнені, що хочете видалити цю групу? Користувачі цієї групи втратять ці дозволи.`,confirm:`Видалити групу`},editor:{title:`Редагувати групу`,createTitle:`Створити групу`,search:`Шукати дозволи...`,selectAll:`Вибрати усі`,clearAll:`Очистити все`,permissionsSelected:`Вибрано: {{count}}`,noResults:`Немає дозволів, що відповідають вашому пошуку`,websocketHint:`Необхідний для оновлень у реальному часі. Без нього інтерфейс повертається до періодичного опитування.`}},users:{title:`Керування користувачами`,subtitle:`Керуйте користувачами та їхнім доступом до вашого екземпляра Bambuddy.`,backToSettings:`Назад до налаштувань`,createUser:`Створити користувача`,noPermission:`Ви не маєте дозволу на доступ до цієї сторінки.`,admin:`адмін`,noGroups:`Немає груп`,active:`Активний`,inactive:`Неактивний`,edit:`Редагувати`,delete:`Видалити`,system:`система`,noGroupsAvailable:`Немає доступних груп`,table:{username:`Ім’я користувача`,groups:`Групи`,status:`Статус`,actions:`Дії`},toast:{created:`Користувача створено успішно`,updated:`Користувача успішно оновлено`,deleted:`Користувача успішно видалено`,fillRequired:`Будь ласка, заповніть усі необхідні поля`,passwordsDoNotMatch:`Паролі не збігаються`,passwordTooShort:`Пароль має бути не менше 6 символів`,ldapProvisioned:`Користувача LDAP «{{username}}» підготовлено`},modal:{createUser:`Створити користувача`,editUser:`Редагувати користувача`,cancel:`Скасувати`,creating:`Створення...`,saving:`Збереження...`,saveChanges:`Зберегти зміни`,advancedAuthSubtitle:`з розширеною автентифікацією`,tabsAriaLabel:`Джерело користувача`,localTab:`Локальний`,ldapTab:`LDAP`,ldapSearchLabel:`Пошук у каталозі`,ldapSearchPlaceholder:`Введіть ім’я користувача, ім’я або електронну адресу...`,ldapMinChars:`Введіть принаймні 2 символи для пошуку`,ldapTypeToSearch:`Почніть вводити текст для пошуку в каталозі LDAP.`,ldapSearching:`Пошук у каталозі...`,ldapNoResults:`У каталозі немає відповідних користувачів`,ldapSearchError:`Помилка пошуку каталогу. Перевірте стан сервера LDAP.`,ldapAlreadyProvisioned:`Уже підготовлено`,ldapSelectedLabel:`Вибране`,ldapProvision:`Підготувати користувача`,ldapProvisioning:`Підготовка...`,ldapErrorProvision:`Не вдалося підготувати користувача. Перевірте стан сервера LDAP і повторіть спробу.`},form:{username:`Ім’я користувача`,usernamePlaceholder:`Введіть ім’я користувача`,email:`Електронна пошта`,emailPlaceholder:`user@example.com`,password:`Пароль`,passwordPlaceholder:`Введіть пароль`,confirmPassword:`Підтвердити пароль`,confirmPasswordPlaceholder:`Підтвердити пароль`,newPasswordPlaceholder:`Введіть новий пароль`,confirmNewPasswordPlaceholder:`Підтвердити новий пароль`,leaveBlankToKeep:`залиште порожнім, щоб зберегти поточне значення`,groups:`Групи`,optional:`необов’язково`,autoGeneratedPassword:`Надійний пароль буде автоматично згенеровано та надіслано користувачеві електронною поштою.`,passwordManagedByAdvancedAuth:`Пароль керується розширеною автентифікацією. Використовуйте «Скинути пароль», щоб надіслати новий пароль користувачеві електронною поштою.`,resetPassword:`Скинути пароль`,resettingPassword:`Скидання пароля...`},deleteModal:{title:`Видалити користувача`,message:`Ви впевнені, що хочете видалити цього користувача? Цю дію не можна скасувати.`,confirm:`Видалити користувача`}},streamOverlay:{title:`Накладання потоку`,invalidPrinterId:`Недійсний ідентифікатор принтера`,cameraStream:`Потік камери`,progress:`Прогрес`,eta:`ETA`,printerIdle:`Принтер неактивний`,printerOffline:`Принтер не в мережі`,builder:{title:`Оформлення трансляції`,description:`Складає адресу оформлення трансляції: повноекранне зображення камери з накладеними даними друку — для OBS, настінного екрана або будь-якого джерела-браузера. Виберіть потрібні поля та скопіюйте адресу.`,printer:`Принтер`,size:`Розмір тексту`,sizeSmall:`Малий`,sizeMedium:`Середній`,sizeLarge:`Великий`,fps:`Частота кадрів`,fpsHint:`Камери A1 і P1 видають щонайбільше близько 5 кадрів за секунду, хоч би яке значення ви задали.`,token:`Токен оформлення трансляції (необов'язково)`,tokenHint:`Потрібен лише за увімкненого входу: OBS не має власного сеансу. Створіть його вище з областю «Оформлення трансляції».`,tokenWarning:`Ця адреса містить токен: будь-хто, хто її прочитає, побачить трансляцію та назву файлу. Відкличте токен, щоб закрити доступ.`,fields:`Поля для показу`,fieldPrinter:`Назва принтера`,fieldFilename:`Назва файлу`,fieldStatus:`Стан`,fieldProgress:`Смуга поступу`,fieldLayers:`Кількість шарів`,fieldEta:`Залишок часу та час завершення`,fieldCamera:`Зображення камери`,chamberHint:`Температура камери показується лише на моделях зі справжнім датчиком: P1 та A1 повідомляють беззмістовне значення, тому її пропущено.`,urlTitle:`Адреса оформлення`,open:`Відкрити`,showPreview:`Показати попередній перегляд`,hidePreview:`Сховати попередній перегляд`,previewTitle:`Попередній перегляд оформлення`},status:{printing:`Друк`,paused:`Призупинено`,finished:`Готово`,failed:`Не вдалося`,idle:`Неактивний`,unknown:`Невідомий`}},profiles:{title:`Профілі`,subtitle:`Керуйте профілями слайсера та калібруваннями Pressure Advance`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Локальні профілі`,kprofiles:`K-профілі`},orcaCloud:{connectedAs:`Підключено як`,connectedShort:`Підключено до Orca Cloud`,logout:`Відключити`,noLogoutPermission:`Ви не маєте дозволу на відключення`,noConnectPermission:`Ви не маєте дозволу на підключення до Orca Cloud`,retry:`Повторити`,connectButton:`Підключити Orca Cloud`,connect:{title:`Підключитися до Orca Cloud`,description:`Увійти у свій обліковий запис Orca Cloud, щоб синхронізувати свої профілі слайсера в Bambuddy.`},device:{title:`Підтвердити Bambuddy в Orca Cloud`,instruction:`Відкрийте Orca Cloud і підтвердьте цей код. Bambuddy підключається автоматично, коли ви підтверджуєте.`,codeLabel:`Ваш код сполучення`,openButton:`Відкрити сторінку підтвердження Orca Cloud`,manualHint:`Або перейдіть до {{url}} і введіть код вище.`,waiting:`Чекаємо на ваше схвалення…`,cancel:`Скасувати`},profiles:{title:`Ваші профілі Orca Cloud ({{count}})`,refresh:`Оновити`,empty:`У вашому обліковому записі Orca Cloud ще не знайдено профілів.`},toast:{disconnected:`Відключено від Orca Cloud`},errors:{startFailed:`Не вдалося розпочати підключення Orca Cloud.`,denied:`Сполучення було відхилено в Orca Cloud.`,expired:`Термін дії коду сполучення минув. Натисніть Підключитися, щоб повторити спробу.`,pollFailed:`Втрачено з’єднання під час очікування підтвердження. Спробуйте ще раз.`}},localProfiles:{title:`Локальні профілі`,subtitle:`Імпорт і керування профілями слайсера з OrcaSlicer`,import:`Імпортувати профілі`,importDesc:`Перетягніть сюди файли .bbscfg, .bbsflmt, .orca_filament, .zip або .json`,importing:`Імпортування…`,search:`Шукати локальні профілі…`,noPresets:`Локальних профілів ще немає`,noSearchResults:`Профілів за вашим запитом не знайдено`,badge:`Локальний`,edit:`Редагувати`,delete:`Видалити`,cancel:`Скасувати`,deleteConfirmTitle:`Видалити профіль`,deleteConfirm:`Видалити цей профіль? Цю дію неможливо скасувати.`,source:`Джерело`,inheritsFrom:`Успадковує`,filamentType:`Тип`,vendor:`Виробник`,compatiblePrinters:`Принтери`,nozzleTemp:`Температура сопла`,cost:`Вартість`,density:`Щільність`,pressureAdvance:`Випередження тиску`,filament:`Філамент`,process:`Процес`,printer:`Принтер`,toast:{importSuccess:`Імпортовано профілів: {{count}}`,importSkipped:`Пропущено профілів-дублікатів: {{count}}`,importError:`Помилок під час імпорту: {{count}}`,deleted:`Профіль видалено`,updated:`Профіль оновлено`}},connectedAs:`Підключено як`,signInExpiredTitle:`Термін входу в Bambu Cloud минув`,signInExpiredBody:`Bambu Lab більше не приймає збережений токен. Увійдіть ще раз, щоб відновити хмарні профілі, імпорт MakerWorld і перевірку прошивки.`,logout:`Вийти`,noLogoutPermission:`Ви не маєте дозволу на вихід`,failedToLoad:`Не вдалося завантажити профілі`,retry:`Повторити`,time:{justNow:`Щойно`,minsAgo:`{{count}}хв тому`,hoursAgo:`{{count}} год тому`,daysAgo:`{{count}} дн. тому`},toast:{loggedOut:`Вихід виконано`},login:{title:`Підключитися до Bambu Cloud`,subtitle:`Синхронізуйте профілі слайсера між пристроями`,email:`Електронна пошта`,password:`Пароль`,region:`Регіон`,regionGlobal:`Глобальний`,regionChina:`Китай`,verificationCode:`Код підтвердження`,totpCode:`Код автентифікатора`,checkEmail:`Перевірте свою електронну пошту ({{email}}), щоб отримати 6-значний код`,enterTotpHint:`Введіть 6-значний код із програми автентифікації`,accessToken:`Токен доступу`,accessTokenHint:`Вставте токен доступу Bambu Cloud. Облікові записи в китайському регіоні мають використовувати цей спосіб, оскільки вони прив’язані до телефона й вхід електронною поштою недоступний. У вікі описано, як отримати токен із файлів cookie MakerWorld.`,back:`Назад`,loginButton:`Увійти`,verifyButton:`Підтвердити`,setTokenButton:`Установити токен`,useToken:`Натомість використати токен доступу`,captchaTitle:`Bambu Cloud вимагає пройти CAPTCHA`,captchaBody:`Bambu вимагає від вашої мережі пройти CAPTCHA, перш ніж прийняти вхід, і відповісти на цю перевірку з Bambuddy неможливо. Річ не в пошті та не в паролі. Блокування прив'язане до вашої публічної IP-адреси і зазвичай зникає саме протягом кількох годин, а повторні спроби лише подовжують його. Щоб увійти зараз, скористайтеся токеном доступу із сеансу браузера.`,useEmail:`Увійти за допомогою електронної пошти`,toast:{loggedIn:`Успішно ввійшли`,codeSent:`Код підтвердження надіслано на вашу електронну адресу`,enterTotp:`Введіть код із програми автентифікації`,tokenSet:`Токен успішно встановлено`}},presets:{myPreset:`Мій профіль (можна редагувати)`,duplicate:`Дублювати`,editable:`Можна редагувати`,failedToLoadDetails:`Не вдалося завантажити відомості про профіль`,deleteConfirm:`Видалити цей профіль?`,deleteWarning:`Це назавжди видалить "{{name}}" із Bambu Cloud. Це неможливо скасувати.`,noDuplicatePermission:`Ви не маєте дозволу на дублювання стилів`,noEditPermission:`Ви не маєте дозволу редагувати стилі`,noDeletePermission:`Ви не маєте дозволу на видалення стилів`,types:{filament:`Попереднє налаштування філаменту`,printer:`Попереднє налаштування принтера`,process:`Попереднє налаштування процесу`},toast:{deleted:`Попереднє налаштування видалено`,created:`Попереднє налаштування створено`,updated:`Попереднє налаштування оновлено`,duplicated:`Профіль продубльовано`,fieldAdded:`Додано поле "{{key}}".`,exported:`Попереднє налаштування експортовано`},baseLabel:`База: {{name}}`,currentLabel:`Поточний профіль: {{name}}`,newPreset:`Нове налаштування`,editPreset:`Редагувати профіль`,duplicatePreset:`Дублювати профіль`,createNewPreset:`Створити новий профіль`,customizeSettings:`Налаштуйте параметри для нового стилю`,compareWithBase:`Порівняти з базовим профілем`,compare:`Порівняйте`,basePreset:`Базове передналаштування`,selectBasePreset:`Виберіть базове налаштування...`,presetName:`Назва профілю`,myCustomPreset:`Мій власний профіль`,inheritsFrom:`Успадковує від`,dropJsonToImport:`Відпустіть JSON, щоб імпортувати`,tabs:{common:`Основні`,allFields:`Всі поля`},availableFields:`Доступні поля`,searchFieldsPlaceholder:`Шукати поля...`,noMatchingFields:`Немає відповідних полів`,allFieldsAdded:`Всі поля додано`,addCustomField:`Додати спеціальне поле`,yourOverrides:`Ваші перевизначення`,noOverridesYet:`Перевизначення ще немає`,clickFieldsToAdd:`Натисніть поля ліворуч, щоб додати їх`,saveAsTemplate:`Зберегти як шаблон`,jsonTip:`Порада: перетягніть файл .json у будь-яке місце на цьому модалі, щоб імпортувати налаштування`},cloudView:{searchPlaceholder:`Шукати профілі...`,templates:`Шаблони`,refresh:`Оновити`,newPreset:`Нове налаштування`,clearFilters:`Очистити фільтри`,compareMode:`Режим порівняння`,selectAnotherPreset:`Вибрати інший попередній набір {{type}}.`,clickTwoPresets:`Клацніть два стилі одного типу, щоб порівняти`,selectFirst:`1. Виберіть перший`,selectSecond:`2. Виберіть другий`,compareNow:`Порівняти зараз`,lastSynced:`Остання синхронізація:`,showingCount:`Показано профілів: {{showing}} із {{total}}`,noPresetsFound:`Попередніх налаштувань не знайдено`,columns:{filament:`Філамент`,process:`процес`,printer:`Принтер`},noFilamentPresets:`Немає профілів філаменту`,noProcessPresets:`Немає профілів процесу`,noPrinterPresets:`Немає профілів принтера`,filters:{type:`Тип`,owner:`Власник`,printer:`Принтер`,nozzle:`Сопло`,filament:`Філамент`,layer:`Шар`,all:`Усі`,myPresets:`Мої профілі`,builtIn:`Вбудований`,process:`процес`},noTemplatesPermission:`Ви не маєте дозволу на керування шаблонами`,noRefreshPermission:`Ви не маєте дозволу оновлювати профілі`,noCreatePermission:`Ви не маєте дозволу створювати профілі`},templates:{title:`Швидкі шаблони`,noTemplates:`Шаблонів ще немає`,createFirst:`Створіть шаблони в редакторі профілів`,typeFilter:`тип:`,deleteTitle:`Видалити шаблон`,deleteWarning:`Цю дію не можна скасувати`,deleteConfirm:`Ви впевнені, що хочете видалити "{{name}}"?`,namePlaceholder:`Назва шаблону`,descriptionPlaceholder:`опис`,settingsJson:`Налаштування (JSON)`,fieldsCount:`Полів: {{count}}`,shownInModals:`Показано в модальних формах`,hiddenInModals:`Приховано в модальних формах`,apply:`Застосувати`,toast:{deleted:`Шаблон видалено`,updated:`Шаблон оновлено`,created:`Шаблон створено`,applied:`Шаблон застосовано`}}},support:{debugLoggingActive:`Журнал налагодження активний`,manageLogs:`Керувати`,collectItem7:`Підключення принтерів і версії прошивок`,collectItem8:`Статус інтеграції (Spoolman, MQTT, HA)`,collectItem9:`Мережеві інтерфейси (лише підмережі)`,collectItem10:`Версії пакетів Python`,collectItem11:`Перевірки справності бази даних`,collectItem12:`Відомості про середовище Docker`,bundleGenerating:`Створення пакета...`,bundleStepConnection:`Запуск перевірки підключення принтера`,bundleStepVirtualPrinters:`Виконання перевірок налаштування віртуального принтера`,bundleStepLogScan:`Сканування останніх журналів на наявність відомих проблем`,bundleStepBuild:`Створення ZIP-пакета підтримки`},fileManager:{variants:{badge:`Версій: {{count}}`,groupAction:`Згрупувати як версії`,groupTooltip:`Позначити ці файли як одне завдання, нарізане для різних принтерів`,grouped:`Файлів згруповано як версії: {{count}}`,printAlternatives:`Друк (варіантів: {{count}})`},title:`Менеджер файлів`,subtitle:`Упорядковуйте файли друку та керуйте ними`,uploadFiles:`Вивантажити файли`,newFolder:`Нова папка`,folderName:`Назва папки`,folderNamePlaceholder:`наприклад, функціональні частини`,renameFile:`Перейменувати файл`,renameFolder:`Перейменувати папку`,invalidFilenameChar:`Символ «{{char}}» не можна використовувати в назвах файлів для друку. SD-картка принтера не приймає такі символи: < > : " / \\ | ? *`,moveFiles:`Перемістити файли: {{count}}`,rootNoFolder:`Корінь (без папки)`,current:`поточний`,linkFolder:`Пов’язати папку`,linkFolderDescription:`Пов’язати «{{name}}» із проєктом або архівом для швидкого доступу.`,project:`Проєкт`,archive:`Архів`,noProjectsFound:`Проєкти не знайдено`,noArchivesFound:`Архіви не знайдено`,unlink:`Від’єднати`,link:`Пов’язати`,dragDropFiles:`Перетягніть файли сюди`,dropFilesHere:`Перетягніть файли сюди`,releaseToUpload:`Відпустіть, щоб вивантажити`,orClickToBrowse:`або натисніть, щоб переглянути`,allFileTypesSupported:`Підтримуються всі типи файлів. Файли ZIP будуть розпаковані.`,zipFilesDetected:`Виявлено файли ZIP.`,zipExtractOptions:`Файли ZIP будуть розпаковані. Виберіть спосіб обробки структури папок:`,preserveZipStructure:`Зберегти структуру папок із ZIP`,createFolderFromZip:`Створити папку з назви ZIP-файлу`,stlThumbnailGeneration:`Створення мініатюр STL`,zipMayContainStl:`Файли ZIP можуть містити файли STL. Мініатюри можна генерувати під час вилучення.`,thumbnailsCanBeGenerated:`Ескізи можна створити для файлів STL. Обробка великих моделей може зайняти більше часу.`,generateThumbnailsForStl:`Створювати мініатюри для файлів STL`,threemfDetected:`Виявлено файли 3MF.`,threemfExtractionInfo:`Модель принтера, матеріал, колір і параметри друку будуть автоматично витягнуті з файлів 3MF.`,willBeExtracted:`Буде розпаковано`,filesExtracted:`Розпаковано файлів: {{count}}`,uploadComplete:`Вивантаження завершено. Успішно: {{succeeded}}`,uploadFailed:`Не вдалося вивантажити`,zipFilesFailed:`Не вдалося обробити файлів: {{count}}`,uploading:`Вивантаження...`,changeLink:`Змінити посилання...`,linkTo:`Посилання на...`,linkToProjectOrArchive:`Посилання на проєкт або архів`,generateThumbnail:`Створити мініатюру`,generateThumbnails:`Створити мініатюри`,generateThumbnailsForMissing:`Створити відсутні мініатюри файлів STL`,gridView:`Вигляд сітки`,listView:`Перегляд списку`,lowDiskSpaceWarning:`Попередження про брак місця на диску`,lowDiskSpaceDetails:`Вільно лише {{free}} із {{total}}. У налаштуваннях задано поріг {{threshold}} ГБ.`,files:`Файли`,folders:`Папки`,size:`Розмір`,free:`Вільно`,allFiles:`Усі файли`,allExternal:`Зовнішні`,externalIsEmpty:`Немає зовнішніх файлів`,externalEmptyDescription:`Тут відображатимуться файли у ваших пов’язаних зовнішніх папках.`,wrap:`Перенесення`,enableTextWrapping:`Увімкнути перенесення тексту`,disableTextWrapping:`Вимкнути перенесення тексту`,collapse:`Згорнути`,collapseFoldersByDefault:`За замовчуванням згорнути папки`,expandFoldersByDefault:`Розгорнути папки за замовчуванням`,folderSort:`Сортування папок`,folderSortByName:`За назвою`,folderSortByActivity:`За останніми діями`,dragToResizeTooltip:`Перетягніть, щоб змінити розмір, двічі клацніть, щоб скинути`,searchFiles:`Пошук файлів...`,searchSubfoldersHint:`Включаючи вкладені папки`,readme:{truncated:`Усічений`,show:`Показати README`,hide:`Приховати README`,label:`README`},tags:{title:`Теги`,subtitle:`Файли міток для наскрізної фільтрації — іграшки, безпечні для дітей, лише PETG, будь-що.`,manage:`Теги`,manageTitle:`Керувати каталогом тегів`,add:`Новий тег`,edit:`Перейменувати тег`,name:`Назва`,fileCount:`Файли`,empty:`Тегів ще немає. Створіть його, щоб розпочати маркування файлів.`,noMatches:`Немає відповідних тегів.`,createPlaceholder:`напр. іграшки, безпечні для дітей, petg`,createButton:`Створити`,nameRequired:`Потрібно вказати назву.`,searchPlaceholder:`Фільтр тегів...`,created:`Тег створено.`,updated:`Тег перейменовано.`,deleted:`Тег видалено.`,saveFailed:`Не вдалося зберегти тег.`,deleteFailed:`Не вдалося видалити тег.`,applyFailed:`Не вдалося застосувати теги.`,applyAdd:`Додати теги`,applyRemove:`Видалити теги`,applyAddSuccess:`Додано теги {{count}} до файлів {{files}}.`,applyRemoveSuccess:`Видалено теги {{count}} у файлах {{files}}.`,actionAdd:`Додати до вибраних файлів`,actionRemove:`Видалити з вибраних файлів`,tagAction:`Тег`,bulkTitle:`Позначити вибрані файли ({{count}})`,bulkTooltip:`Додати або видалити теги для кожного вибраного файлу.`,noPermission:`Ви не маєте дозволу позначати файли тегами.`,filterLabel:`Фільтрування за:`,clearAll:`Очистити все`,confirmDelete:`Видалити тег "{{name}}"?`,confirmDeleteMessage:`Це видалить тег з каталогу. Файли зберігають інші теги.`,confirmDeleteInUseMessage:`Цей тег призначено файлам ({{count}}). Його буде видалено з усіх файлів, але самі файли залишаться без змін.`,editAria:`Редагувати {{name}}`,deleteAria:`Видалити {{name}}`},allTypes:`Усі типи`,prints:`Друки`,ascending:`За зростанням`,descending:`За спаданням`,showModified:`Показати змінені дати`,hideModified:`Приховати змінені дати`,lastModified:`Востаннє змінено`,lastActivity:`Остання активність`,resultsCount:`{{showing}} з {{total}} файлів`,selectAll:`Вибрати усі`,deselectAll:`Зняти вибір із усіх`,selected:`Вибрано: {{count}}`,adding:`Додавання...`,loadingFiles:`Завантаження файлів...`,folderIsEmpty:`Папка порожня`,noFilesYet:`Файлів ще немає`,folderEmptyDescription:`Щоб почати, вивантажте файли або перемістіть їх до цієї папки.`,noFilesDescription:`Вивантажте файли, щоб упорядковувати матеріали для друку.`,noMatchingFiles:`Немає відповідних файлів`,noMatchingFilesDescription:`Жоден файл не відповідає вашим поточним критеріям пошуку чи фільтру.`,clearFilters:`Очистити фільтри`,printedCount:`Надруковано {{count}}x`,uploadedBy:`Вивантажено`,deleteFolder:`Видалити папку`,deleteFile:`Видалити файл`,deleteFilesCount:`Видалити файли {{count}}.`,deleteFolderConfirm:`Ви впевнені, що хочете видалити цю папку? Усі файли всередині також буде видалено.`,deleteFileConfirm:`Ви впевнені, що хочете видалити цей файл?`,deleteFilesConfirm:`Ви впевнені, що бажаєте видалити вибрані файли {{count}}? Цю дію не можна скасувати.`,deleting:`Видалення...`,noPermissionRenameFolder:`Ви не маєте дозволу на перейменування папок`,noPermissionLinkFolder:`Ви не маєте дозволу на пов’язування папок`,noPermissionDeleteFolder:`Ви не маєте дозволу на видалення папок`,onlyEmptyFoldersDeletable:`Можна видаляти лише порожні папки`,noPermissionPrint:`Ви не маєте дозволу на друк`,noPermissionAddToQueue:`Ви не маєте дозволу на додавання в чергу`,noPermissionSlice:`Ви не маєте дозволу нарізати файли`,noPermissionDownload:`У вас немає дозволу на завантаження файлів`,noPermissionPreview:`У вас немає дозволу на попередній перегляд файлів`,preview3d:`3D-перегляд`,noPermissionRenameFile:`Ви не маєте дозволу на перейменування цього файлу`,noPermissionGenerateThumbnail:`Ви не маєте дозволу створювати мініатюри`,noPermissionDeleteFile:`Ви не маєте дозволу на видалення цього файлу`,noPermissionCreateFolder:`Ви не маєте дозволу на створення папок`,noPermissionUpload:`Ви не маєте дозволу на вивантаження файлів`,noPermissionMoveFiles:`Ви не маєте дозволу на переміщення файлів`,noPermissionDeleteFiles:`Ви не маєте дозволу на видалення файлів`,linkExternal:`Зовнішнє посилання`,linkExternalFolder:`Посилання на зовнішню папку`,linkExternalFolderDescription:`Змонтуйте каталог хоста (NAS, USB, спільний мережевий ресурс) у файловому менеджері. Файли не копіюються — доступ до них здійснюється безпосередньо з початкового шляху.`,externalFolderNamePlaceholder:`наприклад, NAS Друкує`,externalPath:`Шлях хоста`,externalPathHelp:`Абсолютний шлях до каталогу на хості Docker. Має бути прив’язано до контейнера.`,readOnly:`Тільки для читання`,readOnlyHelp:`забороняє вивантаження й видалення`,showHiddenFiles:`Показати приховані файли (dotfiles)`,externalFolder:`Зовнішня папка`,scanFolder:`Сканувати`,toast:{folderCreated:`Папка створена`,openInSlicerFailed:`Не вдалося відкрити у слайсері`,folderDeleted:`Папку видалено`,fileDeleted:`Файл видалено`,filesDeleted:`Видалені файли {{count}}.`,filesMoved:`Файли переміщено`,folderLinked:`Папку пов’язано`,folderUnlinked:`Папку від’єднано`,externalFolderLinked:`Зовнішня папка пов’язана та просканована`,folderScanned:`Сканування завершено: {{added}} додано, {{removed}} видалено`,addedToQueue:`Додано до черги файлів: {{count}}`,addedToQueuePartial:`Додано: {{added}}; не вдалося додати: {{failed}}`,failedToAddToQueue:`Не вдалося додати файли: {{error}}`,fileRenamed:`Файл перейменовано`,folderRenamed:`Папку перейменовано`,thumbnailsGenerated:`Створено мініатюри {{count}}`,thumbnailsGeneratedPartial:`Створено мініатюри {{succeeded}}, {{failed}} не вдалося`,noStlMissingThumbnails:`Немає файлів STL без мініатюр`,failedToGenerateThumbnails:`Не вдалося створити мініатюри: {{error}}`,thumbnailGenerated:`Створено мініатюру`,failedToGenerateThumbnail:`Не вдалося створити мініатюру: {{error}}`}},projects:{parentLabel:`Батьківський проєкт`,parentNone:`Немає (проєкт верхнього рівня)`,parentHint:`Вкладіть цей проєкт в інший, щоб його показники підсумовувалися в головному проєкті`,partOf:`Частина проєкту {{name}}`,subProjectCount:`Підпроєктів: {{count}}`,subProjectsOf:`Підпроєкти проєкту {{name}}`,collapseSubProjects:`Згорнути підпроєкти`,expandSubProjects:`Розгорнути підпроєкти`,title:`Проєкти`,subtitle:`Організовуйте та відстежуйте свої проєкти 3D-друку`,newProject:`Новий проєкт`,editProject:`Редагувати проєкт`,deleteProject:`Видалити проєкт`,projectName:`Назва проєкту`,description:`опис`,noProjects:`Проєктів ще немає`,noProjectsFiltered:`Немає проєктів {{status}}.`,noProjectsFilteredHelp:`У вас немає {{status}} проєктів. Проєкти з’являться тут, коли їхній статус зміниться.`,createFirst:`Створіть свій перший проєкт, щоб почати впорядковувати пов’язані роздруківки, відстежувати прогрес і керувати збірками.`,createFirstButton:`Створіть свій перший проєкт`,create:`Створити`,files:`Файли`,prints:`Принти`,plates:`пластини`,parts:`частин`,lastModified:`Остання зміна`,deleteConfirm:`Ви впевнені, що хочете видалити цей проєкт? Архіви та елементи черги буде від’єднано, але не видалено.`,addFiles:`Додати файли`,removeFile:`Видалити файл`,viewDetails:`Переглянути деталі`,namePlaceholder:`наприклад, Voron 2.4 Build`,descriptionPlaceholder:`Додатковий опис...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URL має починатися з http:// або https://`,openExternalUrl:`Відкритий проєкт URL`,coverImageLabel:`Фото обкладинки`,coverImageAlt:`Обкладинка проєкту`,coverImageUpload:`Вивантажити`,coverImageReplace:`Замінити`,coverImageRemove:`видалити`,color:`Колір`,targetPlates:`Цільові пластини`,targetPlatesPlaceholder:`наприклад, 25`,targetPlatesHelp:`Кількість завдань друку`,targetParts:`Цільові частини`,targetPartsPlaceholder:`наприклад, 150`,targetPartsHelp:`Загальна кількість необхідних об’єктів`,targetSets:`Копій кожного файлу`,targetSetsPlaceholder:`наприклад, 10`,targetSetsHelp:`Кількість друків кожного придатного до друку файлу`,tagsLabel:`Теги (розділені комами)`,tagsPlaceholder:`напр., ворон, функціональний, подарунок`,dueDate:`Термін виконання`,priority:`Пріоритет`,priorityLow:`Низький`,priorityNormal:`нормальний`,priorityHigh:`Високий`,priorityUrgent:`Терміново`,statusActive:`Активний`,statusCompleted:`Виконано`,statusArchived:`Архівовано`,done:`Готово`,completed:`завершено`,failed:`не вдалося`,inQueue:`в черзі`,noPrintsYet:`Ще немає відбитків`,printJobs:`Завдання друку (пластини)`,partsPrinted:`Надруковані частини`,failedParts:`Вийшли з ладу деталі`,import:`Імпорт`,export:`Експорт`,importProject:`Імпорт проєкту`,exportAll:`Експортуйте всі проєкти`,loading:`Завантаження проєктів...`,noEditPermission:`Ви не маєте дозволу на редагування проєктів`,noDeletePermission:`Ви не маєте дозволу на видалення проєктів`,noCreatePermission:`Ви не маєте дозволу на створення проєктів`,noImportPermission:`Ви не маєте дозволу на імпорт проєктів`,noExportPermission:`Ви не маєте дозволу на експорт проєктів`,toast:{created:`Проєкт створено`,updated:`Проєкт оновлений`,deleted:`Проєкт видалено`,imported:`Проєкт імпортовано`,multipleImported:`{{count}} проєкти імпортовані`,importFailed:`Помилка імпорту`,exported:`Експортовані проєкти (лише метадані)`}},projectDetail:{notFound:`Проєкт не знайдено`,backToProjects:`Назад до проєктів`,export:`Експорт`,exportProject:`Експортний проєкт`,noExportPermission:`Ви не маєте дозволу на експорт проєктів`,noEditPermission:`Ви не маєте дозволу на редагування проєктів`,partOf:`частина:`,priorityLabel:`Пріоритет:`,noPrints:`У цьому проєкті ще немає роздруківок`,status:{active:`Активний`,completed:`Виконано`,archived:`Архівовано`},priority:{low:`Низький`,normal:`нормальний`,high:`Високий`,urgent:`Терміново`},dueDate:{overdue:`Прострочена`,today:`Термін виконання сьогодні`,daysLeft:`Залишилося {{count}} днів`},progress:{platesProgress:`Пластини Прогрес`,partsProgress:`Прогрес запчастин`,setsProgress:`Завершені комплекти`,sets:`комплектів`,setsHint:`Комплект вважається завершеним, коли кожен придатний до друку файл надруковано стільки разів`,printJobs:`завдання друку`,parts:`частин`,percentComplete:`{{percent}}% виконано`,remaining:`Залишилося {{count}}.`},stats:{printJobs:`Завдання друку`,total:`всього`,failed:`{{count}} не вдалося`,partsPrinted:`Надруковані частини {{count}}.`,printTime:`Час друку`,filamentUsed:`Філамент, що використовується`},cost:{title:`Відстеження витрат`,filamentCost:`Вартість філаменту`,energy:`Енергія`,totalCost:`Загальна вартість`,total:`Всього`,includesBom:`в т.ч. BOM`,budget:`Бюджет`,remaining:`Залишилося`},subProjects:{title:`Підпроєкти ({{count}})`,jobs:`Завдань: {{count}}`},rollup:{title:`Разом із підпроєктами: {{count}}`,progress:`Загальний прогрес`,percentComplete:`Завершено {{percent}}%`},notes:{title:`Примітки`,noEditPermission:`Ви не маєте дозволу редагувати нотатки`,placeholder:`Додайте примітки щодо цього проєкту...`,empty:`Приміток ще немає. Натисніть Редагувати, щоб додати примітки.`},files:{title:`Файли`,linkFolders:`Зв’язувати папки з файлового менеджера`,forQuickAccess:`до цього проєкту для швидкого доступу.`,fileCount:`Файлів: {{count}}`,empty:`Немає пов’язаних папок. Перейдіть до файлового менеджера та зв’яжіть папку з цим проєктом.`,printedCount:`Надруковано разів: {{count}}`,progressTooltip:`Завершено друків: {{done}} із {{target}}`,noFiles:`У цій папці немає файлів.`},bom:{title:`Перелік матеріалів`,acquired:`{{completed}}/{{total}} придбано`,showAll:`Показати все`,hideDone:`Сховати готове`,addPart:`Додати частину`,noAddPermission:`Ви не маєте дозволу додавати частини`,partNamePlaceholder:`Назва деталі (наприклад, гвинти M3x8)`,partName:`Назва частини`,qty:`кількість`,price:`Ціна ({{currency}})`,sourcingUrlPlaceholder:`URL джерела (необов’язково)`,remarksPlaceholder:`Примітки (необов’язково)`,deletePart:`Видалити частину`,deleteConfirm:`Ви впевнені, що хочете видалити "{{name}}"?`,noUpdatePermission:`Ви не маєте дозволу на оновлення частин`,noEditPermission:`Ви не маєте дозволу редагувати частини`,noDeletePermission:`Ви не маєте дозволу на видалення частин`,totalCost:`Загальна вартість:`,empty:`Немає частин у описі матеріалів. Додайте обладнання, електроніку чи інші компоненти, щоб відстежувати, що потрібно отримати.`},timeline:{title:`Хронологія діяльності`,empty:`Активності ще немає.`},template:{saveAsTemplate:`Зберегти як шаблон`,noCreatePermission:`Ви не маєте дозволу на створення шаблонів`},queue:{title:`Черга`,viewAll:`Переглянути всі`,printing:`Друкується: {{count}}`,queued:`{{count}} у черзі`},prints:{title:`Друки ({{count}})`},toast:{projectUpdated:`Проєкт оновлений`,partAdded:`Частина додана`,partRemoved:`Частину видалено`,exportFailed:`Помилка експорту`,projectExported:`Проєкт експортовано`,templateCreated:`Шаблон створено`}},system:{title:`Інформація про систему`,version:`Версія`,uptime:`Час роботи`,cpuUsage:`CPU Використання`,memoryUsage:`Використання пам’яті`,diskUsage:`Використання диска`,networkInfo:`Інформація про мережу`,logs:`Журнали`,debugMode:`Режим налагодження`,enableDebug:`Увімкнути журнал налагодження`,disableDebug:`Вимкнути ведення журналу налагодження`,downloadLogs:`Завантажити журнали`,clearLogs:`Очистити журнали`,dockerInfo:`Docker Інформація`,containerName:`Назва контейнера`,imageName:`Назва зображення`,platform:`Платформа`,architecture:`Архітектура`},sponsors:{sectionTitle:`Незалежний і фінансований громадою`,tagline:`Bambuddy є безкоштовним і залишається таким, тому що люди вирішили його підтримати. Ні VC, ні блокування в хмарі.`,viewSupporters:`Переглянути прихильників`,toastPrints:`Завершено друків із Bambuddy: {{count}}. Bambuddy залишається безкоштовним завдяки своїм прихильникам.`,toastCost:`За допомогою Bambuddy обліковано філаменту на {{total}}. Дізнайтеся, хто допомагає проєкту залишатися незалежним.`,toastArchives:`Заархівовано друків із Bambuddy: {{count}}. Дізнайтеся, хто допомагає проєкту залишатися незалежним.`,toastAnniversary:`Рік з Bambuddy! Подивіться, хто зберігає незалежність проєкту.`,toastVersionUpdate:`Оновлено до v{{version}}. Bambuddy залишається безкоштовним завдяки своїм прихильникам.`,toastBusiness:`Використовуєте Bambuddy на принтерах ({{count}})? Для команд доступний план підтримки: пріоритетні виправлення, виставлення рахунків і прямий зв’язок із супровідником.`,businessCta:`Bambuddy для бізнесу`,businessTitle:`Bambuddy для бізнесу`,businessTagline:`Ви використовуєте принтери {{count}}. Пріоритетна підтримка, комерційне ліцензування та виставлення рахунків доступні для команд і друкарень.`},library:{title:`Бібліотека філаментів`,addFilament:`Додати філамент`,editFilament:`Редагувати філамент`,deleteFilament:`Видалити філамент`,vendor:`Продавець`,material:`матеріал`,color:`Колір`,kFactor:`Фактор K`,temperature:`температура`,noFilaments:`У бібліотеці немає філаментів`,deleteConfirm:`Ви впевнені, що хочете видалити цю філамент?`,importFromPrinter:`Імпорт із принтера`,exportToFile:`Експорт у файл`,runWithPipeline:{actionLabel:`Запустити з конвеєром`,noPermission:`Ви не маєте дозволу на запуск конвеєрів`,modalTitle:`Запустити з конвеєром`,confirmTitle:`Підтвердити запуск`,confirmIntro:`Під час попередньої перевірки виявлено проблеми з цим запуском`,sourceHint:`Джерело`,pipelineHint:`Конвеєр`,targetHint:`Ціль`,pipelineListAria:`Наявні конвеєри`,runAnyway:`Усе одно запустити`,loading:`Завантаження…`,empty:`Збережених конвеєрів ще немає. Відкрийте вікно нарізання й натисніть «Зберегти як конвеєр», щоб створити його.`,noTarget:`Цільовий принтер не встановлено`,noTargetMessage:`Для цього конвеєра не задано цільовий принтер. Відкрийте конвеєр у налаштуваннях і виберіть принтер.`,copies:`Копії`,copiesHint:`максимум {{n}}`,classTarget:`Будь-який {{model}}`,toast:{started:`Пуск конвеєра розпочато`,failed:`Не вдалося розпочати запуск`},issue:{printerNotSet:`У цьому конвеєрі не встановлено цільовий принтер.`,printerNotFound:`Цільовий принтер більше не існує.`,printerDisabled:`Цільовий принтер вимкнено.`,printerOffline:`Цільовий принтер не в мережі.`,filamentType:`Слот філаменту {{slot}}: очікується {{expected}}, в AMS — {{actual}}`,filamentColor:`Слот філаменту {{slot}}: колір не збігається (очікується {{expected}}, в AMS — {{actual}})`,amsSlotMissing:`Слот AMS {{slot}} недоступний на цьому принтері`,filamentUnverified:`Філамент для слота {{slot}} походить із хмарного або стандартного профілю, тому його неможливо перевірити заздалегідь.`,noClassMatches:`Жоден принтер у цій інсталяції не належить до цільового класу моделей конвеєра ({{expected}}).`,classNotSet:`Ціллю конвеєра вибрано клас принтерів, але модель не задано.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Показано типові значення слайсера: ваш sidecar старіший за цю функцію і не може повідомити значення профілю. Оновіть образ sidecar, щоб їх побачити. Усе, чого ви не змінюєте, і далі береться з профілю.`,presetValuesNotConfigured:`Показано типові значення слайсера: sidecar не налаштовано, тому значення профілю прочитати не можна. Усе, чого ви не змінюєте, і далі береться з профілю.`,presetValuesSidecarUnavailable:`Показано типові значення слайсера: sidecar не відповів, тому значення профілю прочитати не можна. Усе, чого ви не змінюєте, і далі береться з профілю.`,presetValuesUnavailable:`Показано типові значення слайсера: значення вибраного профілю не вдалося прочитати. Усе, чого ви не змінюєте, і далі береться з профілю.`,filamentDefault:`За замовчуванням`,fromFile:`з файлу`,fromFileHint:`Автор моделі змінив цей параметр у вихідному файлі. Значення: {{value}}.`,fromFilePrinterCoupled:`принтер автора`,fromFilePrinterCoupledHint:`Підібрано під принтер, для якого створено файл, — на вашому значення може бути хибним або поза діапазоном.`,fromFileOverridesPreset:`перевизначає пресет`,fromFileOverridesPresetHint:`У файлі задано {{value}}, а вибраний пресет використовує {{preset}}. Позначайте, лише якщо перевагу має файл.`,useFromFile:`Використовувати значення з вихідного файлу для «{{option}}»`,otherFromFile:`Інші параметри з цього файлу`,fromFileSummary:`Дизайнер змінив у цьому файлі {{count}} параметрів процесу. Застосовуються лише позначені.`,fromFileUseAll:`Використати налаштування дизайнера`,fromFileUseAllHint:`Позначає параметри, які переносяться на інші принтери. Підлаштовані під принтер дизайнера та ті, що визначають обраний пресет, лишаються вимкненими.`,fromFileClear:`Зняти {{count}}`,loading:`Завантаження налаштувань слайсера…`,mode:{simple:`Простий`,advanced:`Розширений`,expert:`Експерт`},searchPlaceholder:`Пошук параметрів`,resetAll:`Скинути: {{count}}`,resetOption:`Скинути до типового значення`,noMatches:`Немає параметрів, що відповідають запиту.`},slice:{filamentSlotUnset:`не задано`,processSettingsEmbedded:`Не використовується, доки увімкнено «Використовувати вбудовані параметри файлу» — нарізанням керують параметри самого файлу.`,processSettingsInactive:`Неактивно`,presetsHidden:`приховано: {{count}}`,showAllPresets:`Показати всі`,showFewerPresets:`Показати менше`,processSettings:`Параметри процесу`,processSettingsHint:`Налаштуйте вибраний профіль для цього нарізання. Усе, чого ви не змінили, лишається як визначено профілем.`,processSettingsChanged:`змінено: {{count}}`,processSettingsUnchanged:`Значення профілю`,title:`Нарізання моделі`,action:`Нарізати`,actionAll:`Нарізати всі пластини ({{count}})`,actionAllTitle:`Нарізати всі пластини в один багатопластинний результат (один архів). Вибір філаменту охоплює всі слоти, визначені проєктом.`,allPlatesToggle:`Нарізати всі пластини ({{count}})`,slicing:`Нарізання…`,printer:`Профіль принтера`,process:`Профіль процесу`,filament:`Профіль філаменту`,filamentSlot:`Філамент {{index}} ({{type}})`,filamentColour:`Колір філаменту`,selectPreset:`— Виберіть профіль —`,loadingPresets:`Завантаження профілів…`,analyzingPlateFilaments:`Аналіз філаментів пластини…`,analyzingPlateFilamentsHint:`Виконується попереднє нарізання, щоб визначити, які слоти AMS використовує ця пластина. Результат кешується, тому повторне відкриття відбувається миттєво.`,previewToast:`Аналіз {{name}} — {{elapsed}}`,previewWithProgress:`Аналіз {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— не використовується на цій пластині`,noPresetsForSlot:`Немає профілів`,otherPrinters:`Інші принтери`,presetsLoadFailed:`Не вдалося завантажити профілі. Спочатку імпортуйте їх у розділі Налаштування → Профілі.`,refreshPresets:`Оновити`,refreshPresetsTitle:`Оновити профілі — отримати найновіші хмарні та вбудовані списки (скористайтеся після видалення профілю в Bambu Studio або Bambu Handy)`,allPresetsRequired:`Потрібно вибрати всі профілі`,useEmbedded:`Використати вбудовані налаштування файлу`,useEmbeddedHint:`Нарізати модель із налаштуваннями автора файлу — стінками, заповненням і філаментом — замість профілів вище. Ця можливість доступна, оскільки модель принтера відповідає файлу.`,autoOrient:`Автоматично орієнтувати об'єкти`,autoOrientHint:`Слайсер поверне кожен об'єкт на бік, який друкується найкраще. Орієнтацію з файлу буде замінено.`,autoArrange:`Автоматично розмістити на столі`,autoArrangeHint:`Слайсер розставить об'єкти так, щоб вони не перекривалися. Розташування з файлу буде замінено.`,enqueuing:`Надсилання завдання нарізання…`,queued:`У черзі…`,failed:`Не вдалося виконати нарізання. Перевірте журнали слайсера.`,startedToast:`Нарізання {{name}} у фоновому режимі…`,queuedToast:`У черзі: {{name}} — {{elapsed}}`,runningToast:`Нарізання {{name}} — {{elapsed}}`,runningWithProgress:`{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,runningWithProgressMultiPlate:`Пластина {{plateIndex}} з {{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,completedToast:`Нарізання {{name}} завершено`,externalWriteFallbackToast:`Збережено у внутрішній бібліотеці: не вдалося записати в зовнішню теку`,failedTitle:`Помилка нарізання`,failedToast:`Помилка нарізання {{name}}: {{detail}}`,tier:{local:`Імпортовані`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Стандартний`},cloud:{notAuthenticated:`Увійдіть у Bambu Cloud (Налаштування → Профілі → Bambu Cloud), щоб переглянути хмарні профілі.`,expired:`Сеанс Bambu Cloud завершився — увійдіть знову, щоб оновити хмарні профілі.`,unreachable:`Bambu Cloud зараз недоступний. Локальні та стандартні профілі й надалі працюють.`},orcaCloud:{notAuthenticated:`Увійдіть до Orca Cloud (Профілі → Orca Cloud), щоб переглянути профілі Orca.`,expired:`Сеанс Orca Cloud завершився — увійдіть ще раз, щоб оновити профілі Orca.`,unreachable:`Orca Cloud зараз недоступний. Інші профілі й надалі працюють.`},bedType:{label:`Друкарська пластина`,auto:`Авто (використовувати профіль процесу)`,coolPlate:`Холодна друкарська пластина`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Інженерна пластина`,highTemp:`Високотемпературна пластина`,texturedPEI:`Текстурована PEI-пластина`,smoothPEI:`Гладка PEI-пластина`},pipelines:{label:`Конвеєр`,applyAria:`Застосувати конвеєр`,applyPrompt:`Застосувати конвеєр…`,empty:`Немає збережених конвеєрів`,saveButton:`Зберегти як конвеєр`,saveTitle:`Зберегти поточний вибір чотирьох слотів як конвеєр для повторного використання`,namePlaceholder:`Назва конвеєра`,nameAria:`Нова назва конвеєра`,toast:{applied:`Застосовано "{{name}}"`,saved:`Конвеєр збережено`,saveFailed:`Не вдалося зберегти`}}},spoolman:{title:`Spoolman Інтеграція`,enabled:`Spoolman Увімкнено`,url:`Spoolman URL`,connected:`Підключено`,disconnected:`Не підключено`,testConnection:`Тестове підключення`,sync:`Синхронізувати`,syncing:`Синхронізація...`,lastSync:`Остання синхронізація`,linkToSpoolman:`Посилання на Spoolman`,openInSpoolman:`Відкрити в Spoolman`,unlinkSpool:`Від’єднати котушка`,unlinkConfirmTitle:`Скасувати призначення котушки?`,unlinkConfirmMessage:`Це призведе до видалення котушки з цього слота. Самі дані котушки залишаться незмінними.`,selectSpool:`Вибрати Spool`,noUnlinkedSpools:`Немає непризначених котушок`,linkSuccess:`Котушку успішно призначено`,linkFailed:`Не вдалося призначити котушку`,unlinkSuccess:`Призначення котушки успішно скасовано`,unlinkFailed:`Не вдалося скасувати призначення котушки`,linkedSpool:`Призначена котушка`,spoolId:`Ідентифікатор котушки`,fillSourceLabel:`(Spoolman)`,weight:`вага`,remaining:`Залишилося`,disableWeightSync:`Вимкнути синхронізацію приблизної ваги AMS.`,disableWeightSyncDesc:`Не оновлюйте залишкову ємність із оцінок AMS. Використовуйте це, якщо ви віддаєте перевагу відстеженню використання Spoolman, а не оцінкам на основі відсотка AMS. Нові котушки все ще використовуватимуть оцінку AMS як початкову вагу.`,reportPartialUsage:`Повідомити про часткове використання для невдалого друку`,reportPartialUsageDesc:`Якщо друк не вдається або скасовується, повідомте приблизну кількість філаменту, використаної до цього моменту, на основі виконання шару.`},locations:{title:`Місця зберігання`,subtitle:`Керуйте полицями, шухлядами та іншими фізичними місцями для зберігання своїх котушок`,add:`Додати місцезнаходження`,addShort:`додати`,edit:`Редагувати місцезнаходження`,name:`Назва`,spools:`Котушки`,sensors:`Датчики`,empty:`Місць зберігання ще немає. Створіть свою першу полицю або ящик.`,manage:`Розташування`,createPlaceholder:`напр. Полиця А, ящик 1`,nameRequired:`Потрібно вказати назву місця`,created:`Розташування створено`,updated:`Розташування оновлено`,deleted:`Розташування видалено`,saveFailed:`Не вдалося зберегти місцезнаходження`,deleteFailed:`Не вдалося видалити місцезнаходження`,deleteBlocked:`Видаліть усі котушки з цього місця перед видаленням`,confirmDelete:`Видалити "{{name}}"?`,confirmDeleteMessage:`Це місце буде видалено з каталогу. Котушки спочатку потрібно перемістити.`,confirmDeleteMessageWithSensors:`Це місце буде видалено з каталогу. Котушки спочатку потрібно перемістити. Підключені датчики також буде видалено.`},inventory:{title:`Облік котушок`,subtitle:`Керуйте своїми котушками`,addToInventory:`Додати до обліку`,addToInventoryPending:`Додавання...`,addToInventorySuccess:`Котушку додано до обліку`,addToInventoryFailed:`Не вдалося додати котушку до обліку`,unknownSpoolTitle:`Виявлено нову котушку філаменту`,unknownSpoolMessage:`У {{location}} виявлено котушку з невідомою RFID-міткою. Додати її до обліку?`,unknownSpoolSlot:`Слот`,bulk:{selectAllVisible:`Вибрати усі видимі`,selectRow:`Вибрати рядок`,selectGroup:`Вибрати групу`,selectionCount:`Вибрано {{count}}.`,edit:`Редагувати`,printLabels:`Друк етикеток`,resetUsage:`Скинути використання`,restore:`Відновити`,archive:`Архівувати`,delete:`Видалити`,clearSelection:`Очистити вибір`,editTitle:`Масове редагування котушок`,editSubtitle:`Застосовується до вибраних котушок {{count}}. Оновлюються лише ті поля, які ви позначите.`,editHint:`Введіть значення в поле, щоб позначити його для оновлення: буде надіслано лише позначені поля. Порожнє поле не змінює котушки; очистити поле можна лише під час редагування окремої котушки.`,useCustom:`Використати «{{value}}»`,toggleField:`Перемкнути оновлення для цього поля`,changeCount:`Буде оновлено полів: {{count}}`,applyPending:`Застосування...`,applyButton:`Застосувати до котушок ({{count}})`,deleteTitle:`Видалити вибрані котушки`,archiveTitle:`Архівувати вибрані котушки`,restoreTitle:`Відновити вибрані котушки`,resetUsageTitle:`Скинути використання на вибраних котушках`,deleteMessage:`Назавжди видалити котушки {{count}}? Це неможливо скасувати.`,archiveMessage:`Архівувати котушки {{count}}? Пізніше їх можна відновити.`,restoreMessage:`Відновити заархівовані котушки {{count}}?`,resetUsageMessage:`Скинути лічильник «Всього спожито» на котушках {{count}}? Залишок ваги зберігається.`,updateSuccess:`Котушок оновлено: {{count}}`,updateFailed:`Помилка масового оновлення`,updatePartial:`Оновлено: {{ok}}; не вдалося оновити: {{failed}}`,updateAllFailed:`Не вдалося оновити жодну з вибраних котушок ({{count}}). Вибір збережено для повторної спроби.`,deleteSuccess:`Котушок видалено: {{count}}`,deleteFailed:`Не вдалося масово видалити`,deletePartial:`Видалено: {{ok}}; не вдалося видалити: {{failed}}`,deleteAllFailed:`Не вдалося видалити жодну з вибраних котушок ({{count}}). Вибір збережено для повторної спроби.`,archiveSuccess:`Котушок заархівовано: {{count}}`,archiveFailed:`Помилка масового архівування`,archivePartial:`Заархівовано: {{ok}}; не вдалося заархівувати: {{failed}}`,archiveAllFailed:`Не вдалося заархівувати жодну з вибраних котушок ({{count}}). Вибір збережено для повторної спроби.`,restoreSuccess:`Котушок відновлено: {{count}}`,restoreFailed:`Помилка масового відновлення`,restorePartial:`Відновлено: {{ok}}; не вдалося відновити: {{failed}}`,restoreAllFailed:`Не вдалося відновити жодну з вибраних котушок ({{count}}). Вибір збережено для повторної спроби.`,invalidHex:`Введіть 6 шістнадцяткових символів (RRGGBB) або 8 (RRGGBBAA). Інакше поле не застосовуватиметься.`},spoolmanMixedContentTitle:`Spoolman не може Завантажити через HTTPS — змішаний вміст заблоковано вашим браузером`,spoolmanMixedContentBody:`Bambuddy обслуговується через HTTPS (через ваш зворотний проксі), але ваш Spoolman URL усе ще звичайний HTTP. Браузери блокують змішаний вміст для безпеки, тому вбудований Spoolman UI не може відтворюватися. Щоб це працювало, Spoolman має бути доступним через HTTPS.`,spoolmanMixedContentFixReverseProxy:`Розмістіть Spoolman за тим самим зворотним проксі, що й Bambuddy (Traefik / Nginx / Caddy) з HTTPS, а потім оновіть Spoolman URL у налаштуваннях до нової адреси HTTPS.`,spoolmanMixedContentFixOpenNewTab:`Як обхідний шлях, відкрийте Spoolman у новій вкладці браузера поверх HTTP — правила змішаного вмісту застосовуються лише до вбудованих фреймів, тому окрема вкладка все ще працює.`,spoolmanOpenInNewTab:`Відкрийте Spoolman у новій вкладці`,labels:{title:`Друк етикеток на котушках`,selectedCount:`Вибрано {{count}}.`,pickSpools:`Виберіть котушки для друку етикеток:`,monochrome:`Монохромний (чорно-білий принтер)`,monochromeHint:`Прибирає зразок кольору та розширює область тексту`,startingPosition:`Початкова позиція етикетки`,startingPositionRange:`Лише для аркушів: L7160 підтримує 1–21; 5160 підтримує 1–30.`,startingPositionInvalid:`Введіть ціле число від 1 до {{capacity}}.`,startingPositionFirst:`Друк починається з позиції 1.`,startingPositionSkipped:`Позиції від 1 до {{lastPosition}} залишаться порожніми на першому аркуші.`,startingPositionRangeError:`Початкова позиція для цього аркуша має бути від 1 до {{capacity}}.`,searchPlaceholder:`Шукайте назву, бренд або #ID`,filterByMaterial:`матеріал:`,allMaterials:`все`,selectVisible:`Вибрати все видиме ({{count}})`,deselectVisible:`Скасувати вибір видимого`,clearAll:`Очистити все`,noSpoolsToShow:`Немає котушок для показу. Налаштуйте фільтр і повторіть спробу.`,noMatches:`Жодна котушка не відповідає поточному пошуку чи фільтру.`,printOne:`Друк етикетки для цієї котушки`,printLabels:`Друк етикеток…`,bulkTitle:`Виберіть котушки для друку етикеток серед показаних ({{count}})`,noSpoolsTitle:`Немає котушок для маркування`,error:`Не вдалося створити мітки: {{msg}}`,sortBy:{label:`Сортувати:`,id:`За ідентифікатором`,color:`За кольором`},templates:{amsHolderSmall:{label:`Тримач AMS — малий (74 × 33 мм)`,hint:`Одна етикетка на сторінці; відповідає етикетці для друку від MakerWorld моделі 752566 (AMS Filament Label Holder).`},amsHolderLarge:{label:`Тримач AMS — великий (75 × 55 мм)`,hint:`Одна етикетка на сторінці; підходить для варіанту тримача етикеток із філаментом AMS із вкладенням картону. Досить місткий для зразка, бренду, матеріалу, ідентифікатора та QR-коду.`},box40x30:{label:`Етикетка коробки (40 × 30 мм)`,hint:`Одна етикетка на сторінці; звичайний розмір рулону DK/Brother, підходить для етикеток у пакетах із філаментом та контейнерах для зберігання.`},box:{label:`Етикетка коробки (62 × 29 мм)`,hint:`Одна етикетка на сторінці; розміром для маленьких етикеток Brother PT/QL і Dymo.`},averyL7160:{label:`Avery L7160 — аркуш А4 (38,1 × 63,5 мм × 21)`,hint:`Європейський аркуш; 21 етикетка на сторінці A4.`},avery5160:{label:`Avery 5160 — аркуш US Letter (25,4 × 66,7 мм × 30)`,hint:`Аркуш американського формату; 30 етикеток на сторінці Letter.`}}},csv:{importButton:`Імпорт CSV`,exportButton:`Експорт CSV`,modalTitle:`Імпорт котушок з CSV`,selectFile:`Виберіть файл CSV або перетягніть його сюди`,dragHint:`Заголовок: material (обов’язково), brand, subtype, color_name, rgba, …`,parsing:`Читання файлу…`,previewError:`Не вдалося прочитати файл CSV.`,validCount:`{{count}} дійсний`,errorCount:`{{count}} помилка`,skippedCount:`{{count}} пропущено`,colRow:`Рядок`,colStatus:`Статус`,colColor:`Колір`,colorResolved:`Кольорове заповнення з каталогу`,colorCrossMaterial:`Колір узятий з іншого матеріалу — точної відповідності в каталозі немає`,duplicateExisting:`Котушка з таким матеріалом, брендом і кольором вже є — вона ще буде імпортована як нова котушка`,spoolmanHint:`У режимі Spoolman використовуйте вбудовані засоби імпорту й експорту Spoolman.`,importValidRows:`Імпорт {{count}} дійсних рядків`,noValidRows:`Немає дійсних рядків`,importing:`Імпорт…`,importSuccess:`Імпортовано котушок: {{count}}`,importError:`Помилка імпорту`,exportError:`Помилка експорту`},addSpool:`Додати котушку`,editSpool:`Редагувати котушку`,copySpool:`Копіювати котушку`,material:`матеріал`,selectMaterial:`Виберіть матеріал...`,subtype:`Підтип`,brand:`Бренд`,searchBrand:`Шукати бренд...`,useCustomBrand:`Використовуйте "{{brand}}"`,useCustomMaterial:`Використовуйте спеціальний матеріал: {{material}}`,suggestedOptions:`Рекомендовані`,allOptions:`Усі`,colorName:`Назва кольору`,colorNamePlaceholder:`Нефритовий білий, вогненно-червоний...`,color:`Колір`,hexColor:`Шістнадцятковий колір`,pickColor:`Вибрати індивідуальний колір`,labelWeight:`Номінальна вага філаменту`,coreWeight:`Вага порожньої котушки`,searchSpoolWeight:`Шукати вагу котушки...`,weightUsed:`Використано`,currentWeight:`Вага, що залишилася`,measuredWeight:`Виміряна вага`,spoolName:`Котушка`,costPerKg:`Вартість за кг`,storageLocation:`Місце зберігання`,temperature:`Температура`,humidity:`Вологість`,battery:`Батарея`,storageLocationPlaceholder:`напр. Полиця А, ящик 1`,openInInventory:`Відкрити в інвентарі`,measuredWeightError:`Виміряна вага має бути між {{min}}g і {{max}}g.`,slicerFilament:`Філамент для нарізки`,slicerFilamentName:`Назва профілю слайсера`,slicerPreset:`Попереднє налаштування слайсера`,searchPresets:`Шукати профілі філаменту...`,selectedPreset:`Вибране`,noPresetsFound:`Попередніх налаштувань не знайдено`,tempOverrides:`Перевизначення температури`,note:`Примітка`,notePlaceholder:`Будь-які додаткові зауваження щодо цієї котушки...`,category:`Категорія`,categoryPlaceholder:`напр. Виробництво, прототип, клієнт А`,categoryNone:`Без категорії`,storageLocationNone:`Місцезнаходження не встановлено`,lowStockThresholdOverride:`Поріг низького запасу (ця котушка)`,lowStockThresholdOverrideHelp:`Залиште поле порожнім, щоб використовувати глобальне порогове значення ({{global}}%).`,clearRfid:`Очистити тег RFID.`,rfidCleared:`Тег RFID видалено`,archive:`Архівувати`,restore:`Відновити`,noSpools:`Ще немає котушок. Щоб почати, додайте свою першу котушку.`,noAvailableSpools:`Немає котушок. Додайте котушку до свого інвентарю або спершу скасуйте призначення іншого слота.`,kProfiles:`K-профілі`,addKProfile:`Додати K-профіль`,assignSpool:`Призначити котушку`,unassignSpool:`Скасувати призначення`,assignSuccess:`Котушку призначено, слот AMS налаштовано`,assignPendingInsert:`Котушку призначено. Слот буде налаштовано після її встановлення.`,assignFailed:`Не вдалося призначити котушку`,selectSpool:`Виберіть котушку, щоб призначити цьому слоту`,assigned:`Призначено`,assigning:`Призначення...`,searchSpools:`Пошук котушок...`,showAllSpools:`Показати всі котушки`,spoolmanSpools:`Котушки Spoolman`,allMaterials:`Усі матеріали`,filterByBrand:`Фільтрувати за брендом...`,showArchived:`Показати архівні`,quickAdd:`Швидке додавання (запас)`,quantity:`Кількість`,stock:`Запас`,configured:`Налаштовано`,spoolsCreated:`Створено котушок: {{count}}`,spoolsPartiallyCreated:`{{created}} з {{total}} котушок створено (деякі не вдалося)`,spoolCreated:`Котушку створено`,spoolUpdated:`Котушку оновлено`,spoolDeleted:`Котушку видалено`,deepLinkSpoolNotFound:`Котушку не знайдено`,deepLinkFetchFailed:`Не вдалося завантажити котушку — спробуйте ще раз`,spoolArchived:`Котушку заархівовано`,spoolRestored:`Котушку відновлено`,kProfileSaveFailed:`Не вдалося зберегти налаштування K-профілю`,syncWeightSpoolNotFound:`Котушку не знайдено — можливо, її видалено`,syncWeightSpoolmanUnreachable:`Spoolman недоступний — спробуйте пізніше`,syncWeightFailed:`Не вдалося синхронізувати вагу`,spoolmanUnreachable:`Spoolman недоступний — спробуйте пізніше`,deleteSpoolNotFound:`Котушку не знайдено — можливо, її вже видалено`,deleteFailed:`Не вдалося видалити котушку`,archiveSpoolNotFound:`Котушку не знайдено — можливо, її вже видалено`,archiveFailed:`Не вдалося заархівувати котушку`,restoreSpoolNotFound:`Котушку не знайдено — можливо, її вже видалено`,restoreFailed:`Не вдалося відновити котушку`,saveFailed:`Не вдалося зберегти зміни`,tagClearFailed:`Не вдалося очистити тег`,deleteConfirm:`Ви впевнені, що хочете видалити цю котушку? Це неможливо скасувати.`,archiveConfirm:`Ви впевнені, що хочете заархівувати цю котушку?`,advancedSettings:`Розширені налаштування`,filamentInfoTab:`Інформація про філамент`,paProfileTab:`Профіль PA`,colorAndCostTab:`Колір і вартість`,printersTab:`Принтери`,filamentInfo:`Філамент`,additional:`Додатково`,loadingPresets:`Завантаження хмарних профілів...`,cloudConnected:`Хмара підключена`,cloudNotConnected:`Хмара не підключена (за умовчанням)`,recentColors:`Останні`,searchColors:`Пошук кольорів...`,searchResults:`Результати пошуку`,allColors:`Всі кольори`,commonColors:`Поширені кольори`,showLess:`Показувати менше`,showAll:`Показати все`,noColorsFound:`Жоден колір не відповідає вашому запиту`,noResults:`Збігів не знайдено`,extraColorsLabel:`Додаткові кольори`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Вставте від 2 до 8 шістнадцяткових знаків, розділених комами. Візуалізація як градієнт.`,extraColorsInvalid:`Проігнорований недійсний шістнадцятковий код: {{tokens}}`,colorEffectLabel:`Ефект`,colorEffect:{none:`Жодного`,sparkle:`Блиск`,wood:`Деревина`,marble:`Мармур`,glow:`Світіння`,matte:`Матовий`,silk:`Шовк`,galaxy:`Галактика`,rainbow:`Веселка`,metal:`метал`,translucent:`Напівпрозорий`,gradient:`Градієнт`,dualColor:`Подвійний колір`,triColor:`Три кольори`,multicolor:`Багатобарвність`},selectMaterialFirst:`Спочатку виберіть матеріал на вкладці «Інформація про філамент».`,noPrintersConfigured:`Принтери не налаштовані. Додайте принтери для використання профілів PA.`,matchingFilter:`Зіставлення`,anyBrand:`Будь-який бренд`,anyVariant:`Будь-який варіант`,autoSelect:`Автоматичний вибір`,matches:`збіги`,match:`збіг`,noMatches:`Немає збігів`,connected:`Підключено`,offline:`Не в мережі`,printerOffline:`Принтер не в мережі. Підключіться, щоб переглянути профілі калібрування.`,noKProfilesMatch:`Немає K-профілів, що відповідають вибраному філаменту.`,leftNozzle:`Ліве сопло`,rightNozzle:`Праве сопло`,profilesSelected:`вибрані профілі калібрування`,filamentPreset:`Пресет філаменту`,presetUseSpoolDefault:`Використовувати пресет котушки`,presetInherited:`успадковано`,presetOverride:`перевизначено`,presetNeedsModel:`Цей принтер ще не повідомив свою модель, тому не може мати власний пресет.`,autoMatchPresets:`Підібрати автоматично`,autoMatchPresetsHint:`Знайти варіант пресета котушки, у назві якого вказано кожну модель`,kProfilesPerPrinter:`K-профілі`,kProfileNotSet:`Не задано`,kProfileFlowMismatch:`Цей профіль виміряно на соплі {{profile}}, але встановлено сопло {{fitted}}, тому його не буде застосовано`,nozzle:`Сопло`,unknownModel:`Невідома модель`,onePrinter:`1 принтер`,nPrinters:`Принтерів: {{n}}`,filamentPresetsLoadFailed:`Не вдалося завантажити пресети за моделями для цієї котушки`,filamentPresetSaveFailed:`Не вдалося зберегти пресети за моделями`,totalInventory:`Загальний запас`,totalConsumed:`Всього спожито`,byMaterial:`За матеріалом`,inPrinter:`У принтері`,lowStock:`Низький запас`,sinceTracking:`З початку відстеження`,resetConsumedCounter:`Скинути лічильник`,resetConsumedCounterTooltip:`Обнулити лічильник спожитих грамів для цієї котушки. Залишкова вага не зміниться.`,resetConsumedCounterConfirm:`Скинути лічильник спожитих грамів на 0? Майбутні роздруківки знову відстежуватимуться з нуля. Сама котушка, розрахунок її залишкової ваги та ваші налаштування не змінюються.`,resetAllConsumedCounters:`Обнулити всі лічильники`,resetAllConsumedCountersTooltip:`Обнулити лічильник спожитих грамів для кожної котушки. Залишкова вага не зміниться.`,resetAllConsumedCountersConfirm:`Скинути лічильники спожитих грамів до 0 для всіх котушок ({{count}}, включно з архівними)? Статистику «Всього спожито» буде очищено, а облік майбутніх друків почнеться з нуля. Самі котушки та їхня залишкова вага не зміняться.`,consumedCounterReset:`Скидання лічильника`,allConsumedCountersReset:`Скинуто лічильники котушок: {{count}}`,resetConsumedCounterFailed:`Не вдалося скинути лічильник`,loadedInAms:`Завантажено в AMS/Ext`,remaining:`Залишилося`,weightCheck:`Перевірка ваги`,lastWeighed:`Останнє зважування`,neverWeighed:`Ще не зважувалася`,search:`Пошук котушок...`,showing:`Показ`,to:`до`,of:`з`,show:`Показати`,spools:`котушки`,spool:`котушка`,page:`Сторінка`,noSpoolsMatch:`Результатів не знайдено`,noSpoolsMatchDesc:`Спробуйте налаштувати пошук або фільтри, щоб знайти те, що ви шукаєте.`,active:`Активний`,archived:`Архівовано`,all:`все`,used:`Використані`,new:`Нові`,clearFilters:`Очистити фільтри`,table:`Таблиця`,cards:`картки`,net:`Нетто`,groupSimilar:`Групувати`,groupedSpools:`Однакових котушок: {{count}}`,groupedRows:`рядки`,columns:`Стовпці`,configureColumns:`Налаштувати стовпці`,configureColumnsDesc:`Перетягніть, щоб змінити порядок стовпців, або використовуйте стрілки. Перемкніть видимість за допомогою значка ока.`,visible:`видно`,reset:`Скинути`,cancel:`Скасувати`,applyChanges:`Застосувати зміни`,moveUp:`Перемістити вгору`,moveDown:`Перемістити вниз`,hideColumn:`Сховати стовпець`,showColumn:`Показати стовпець`,linkToSpool:`Прив’язати до котушки`,tagLinked:`Тег пов’язано з котушкою`,tagLinkFailed:`Не вдалося зв’язати тег`,tagAlreadyLinked:`Тег уже пов’язано з котушкою #{{id}}`,unknownTag:`Виявлено невідомий тег RFID.`,usageHistory:`Історія використання`,noUsageHistory:`Використання ще не зареєстровано`,printName:`Назва друку`,weightConsumed:`Витрачена вага`,clearHistory:`Очистити`,historyCleared:`Історію використання очищено`,fillSourceLabel:`(Інвентар)`,lowStockThresholdError:`Порогове значення має бути від 0,1 до 99,9`,assignMismatchTitle:`Невідповідність матеріалу`,assignMismatchMessage:`Вибраний матеріал котушки "{{spoolMaterial}}" не відповідає матеріалу лотка "{{trayMaterial}}" для {{location}}. Все одно призначити?`,assignMismatchConfirm:`Все одно призначити`,assignPartialMismatchMessage:`Матеріал котушки "{{spoolMaterial}}" схожий на "{{trayMaterial}}" у {{location}}, але не зовсім відповідає. Ви бажаєте продовжити?`,assignProfileMismatchMessage:`Профіль котушки «{{spoolProfile}}» не відповідає профілю лотка «{{trayProfile}}» у {{location}}. Ви бажаєте продовжити?`,assignReconfigureNote:`Слот AMS буде переналаштовано для використання профілю котушки.`,spoolmanFilamentCatalog:`Каталог філаментів Spoolman`,pickFromSpoolmanCatalog:`Вибрати з каталогу Spoolman…`,spoolmanFilamentSelected:`Філамент вибрано з каталогу Spoolman`,spoolmanFilamentUnlinked:`Посилання на каталог філаментів видалено`,noSpoolmanFilaments:`У каталозі Spoolman не знайдено філаментів`,spoolmanFilamentColorSwatch:`Колір філаменту`,spoolWeightManagedBySpoolman:`Вага порожньої котушки керується залежно від типу філаменту в Spoolman`,spoolmanCatalogLoadFailed:`Не вдалося завантажити каталог філаментів Spoolman`},timelapse:{title:`Таймлапс`,create:`Створити Timelapse`,download:`Завантажити`,delete:`Видалити`,preview:`Попередній перегляд`,frameRate:`Частота кадрів`,quality:`якість`,processing:`Обробка...`,noTimelapses:`Немає таймлапсів`},ams:{title:`AMS`,slot:`Слот`,empty:`Порожній`,emptySlot:`Порожній слот`,slotEmpty:`Порожній`,slotUnconfigured:`?`,emptySlotReset:`Філамент не призначено`,unknown:`Невідомий`,humidity:`Вологість`,temperature:`температура`,filamentType:`Тип філаменту`,filamentColor:`Колір`,remaining:`Залишилося`,history:`AMS Історія`,noHistory:`Історія недоступна`,configureSlot:`Налаштувати слот`,externalSpool:`Зовнішня котушка`,profile:`Профіль`,kFactor:`Фактор K`,kFactorShort:`K`,fill:`Рівень заповнення`,configure:`Налаштувати`,used:`використовується`,remainingUnit:`залишилося`},printModal:{variants:{editNote:`Ці варіанти задано під час додавання в чергу. Щоб змінити, скасуйте та додайте знову.`,title:`Варіанти принтера`,help:`Одне завдання, одне місце в черзі. Перший відповідний принтер, що звільниться, надрукує свій файл.`,unknownModel:`Невідома модель`,plateFor:`Стіл для {{filename}}`,moveUp:`Вгору`,moveDown:`Вниз`,queued:`У черзі, варіантів: {{count}}`},selectPrinter:`Вибрати принтер`,selectPlate:`Вибрати пластину`,filamentMapping:`Зіставлення філаментів`,useArchiveMapping:`Зіставлення`,useArchiveMappingTooltip:`Вибрати всі слоти зі зіставлення AMS, збереженого з цим записом (зі слайсера), замість добору за типом/кольором.`,clickToChangeSlot:`Натисніть, щоб змінити призначення слота`,reRead:`Перечитати`,plateN:`Пластина {{n}}`,plateFilamentsUnreadable:`Не вдалося прочитати філаменти вибраної пластини, тому їх неможливо зіставити. Зніміть вибір із цієї пластини, щоб додати решту до черги.`,totalCost:`Загальна вартість:`,slotRemainingShort:` — залишилося {{grams}} г`,printSettings:`Налаштування друку`,bedLeveling:`Вирівнювання столу`,flowCalibration:`Калібрування потоку`,vibrationCalibration:`Калібрування вібрації`,layerInspection:`Перевірка першого шару`,timelapse:`Таймлапс`,cancel:`Скасувати`,noPrintersAvailable:`Немає доступних принтерів`,printerBusy:`Принтер зайнятий`,printerOffline:`Принтер не в мережі`,sameTypeDifferentColor:`Одного типу, іншого кольору`,filamentTypeNotLoaded:`Тип філаменту не завантажено`,statusReady:`Готово`,statusColorMismatch:`Колір не збігається`,statusTypeNotFound:`Тип не знайдено`,requiredTooltip:`Потрібно: {{name}} - {{color}}`,manuallySelected:`Вибрано вручну`,autoMatched:`Підібрано автоматично`,selectSlot:`Вибрати слот`,sameTypeDifferentColorDetail:`Того самого типу, іншого кольору: потрібен {{required}}, у слоті {{loaded}}`,requiredTypeNotInPrinter:`Потрібний тип філаменту не знайдено у принтері.`,whenToPrint:`Коли друкувати`,asap:`Якнайшвидше`,queue:`Черга`,schedule:`За розкладом`,dateTime:`Дата й час`,invalidDateTime:`Введіть дійсну дату й час`,openCalendar:`Відкрити календар`,requireManualStart:`Потрібен ручний запуск`,requirePreviousSuccess:`Починати, лише якщо попередній друк вдався`,autoOffAfter:`Вимкнути принтер після завершення`,helpAsap:`Завдання буде додано на початок черги й розпочнеться, щойно відповідний принтер звільниться.`,helpSchedule:`Друк розпочнеться в запланований час, якщо принтер буде вільний. Якщо принтер зайнятий, завдання чекатиме, доки він звільниться.`,helpQueue:`Завдання буде додано в кінець черги.`,leftNozzle:`Л`,rightNozzle:`Р`,leftNozzleTooltip:`Ліве сопло`,rightNozzleTooltip:`Праве сопло`,ftsSameInletHint:`Усі філаменти для цього друку підключені до перемикача тракту філаменту IN-{{inlet}}. Зміна між філаментами на одному вході повільніша — перемістіть один в AMS на іншому вході.`,rackPosition:`Позиція у стійці`,rackPositionTooltip:`Яким соплом зі стійки друкувати цей філамент. Позиції нумеруються так само, як на принтері.`,rackEmptyPosition:`Ця позиція у стійці порожня`,rackWrongNozzle:`Встановлено сопло {{has}}; цьому філаменту потрібно {{needs}}`,filamentOverride:`Перевизначення філаменту`,filamentOverrideHint:`Необов’язково замініть філаменти для призначення на основі моделі. Планувальник зіставлятиметься з вибраними філаментами замість вихідних значень 3MF.`,originalFilament:`Оригінал`,overrideWith:`Перевизначити за допомогою`,resetToOriginal:`Скинути до оригіналу`,insufficientFilamentTitle:`Недостатньо філаменту`,waitingForAmsStatus:`Очікування статусу AMS від {{printer}}…`,insufficientFilamentMessage:`У деяких призначених котушках залишилося менше філаменту, ніж потрібно для друку:`,insufficientFilamentLine:`{{printer}} - {{slot}}: потрібно {{required}}g, залишилося {{remaining}}g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: потрібно {{required}}g, доступно {{remaining}}g на відповідних котушках (резервне перемикання філаменту AMS)`,printAnyway:`Усе одно друкувати`,forceColorMatch:`Примусовий збіг кольорів`,staggerPrinterStarts:`Запускати принтери почергово`,staggerGroupSize:`Розмір групи`,staggerInterval:`Інтервал (хв)`,staggerPreview:`Принтерів: {{printers}} → груп: {{groups}}, по {{size}}; інтервал запуску — {{interval}} хв`,staggerLastGroup:`остання група: {{count}}`,staggerTotal:`всього: {{minutes}} хв`,staggerToPrinters:`Розподілити запуск між {{count}} принтерами`,gcodeInjection:`Додати G-код автоматичного друку`,insufficientBudget:`Недостатньо бюджету`,unlimitedNoBudget:`Без обмежень — ліміт бюджету не встановлено.`,noPrintableCostCenters:`Немає активного центру витрат, доступного для друку. Попросіть адміністратора надати вам доступ до друку.`},backup:{includesEncryptionKey:`Локальні резервні копії включають файл ключа шифрування MFA (DATA_DIR/.mfa_encryption_key), тому резервна копія ZIP є автономною. Вважайте ZIP конфіденційним — кожен, хто має файл, може розшифрувати секрети клієнта OIDC і секрети TOTP, що зберігаються в ньому.`,title:`Резервне копіювання та відновлення`,createBackup:`Створити резервну копію`,restoreBackup:`Відновити резервну копію`,restoreDescription:`Замінити всі дані даними з файлу резервної копії`,downloadBackup:`Завантажити резервну копію`,uploadBackup:`Вивантажити резервну копію`,lastBackup:`Остання резервна копія`,autoBackup:`Автоматичне резервне копіювання`,backupNow:`Створити резервну копію зараз`,restoreWarning:`Увага: відновлення резервної копії перезапише всі поточні дані.`,includeArchives:`Включати архіви`,includeSettings:`Включити налаштування`,includeProfiles:`Включити профілі`,backupSuccess:`Резервну копію створено успішно`,restoreSuccess:`Резервну копію успішно відновлено`,backupFailed:`Помилка резервного копіювання`,restoreFailed:`Не вдалося відновити`,restoreNote:`Віртуальний принтер буде зупинено під час відновлення`,githubBackup:`Резервне копіювання Git`,enabled:`Увімкнено`,cloudLoginRequired:`Потрібно ввійти в Bambu Cloud. Перейдіть до Профілі → Хмарні профілі, щоб увімкнути резервне копіювання до GitHub.`,cloudLoginRequiredShort:`Потрібен вхід у хмару`,githubDescription:`Автоматично синхронізуйте свої профілі з приватним репозиторієм GitHub для резервного копіювання та історії версій.`,repoIsPrivate:`Репозиторій приватний — безпечно створювати резервні копії.`,repoIsPublicWarning:`Репозиторій є ПУБЛІЧНИМ. Резервні копії Bambuddy містять облікові дані MQTT, токени Home Assistant, токени Prometheus, вашу електронну пошту Bambu Cloud і коди доступу до принтера через K-профілі. Збереження блокується, доки ви не зробите репозиторій приватним у налаштуваннях постачальника.`,repoVisibilityUnknown:`Не вдалося визначити видимість репозиторію. Bambuddy створює резервні копії лише в підтверджено приватних репозиторіях, тому збереження буде заблоковано.`,repositoryUrl:`URL репозиторію`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Дозволити незахищений HTTP`,allowInsecureHttpHint:`Увімкнути для саморозміщених екземплярів у приватних мережах без TLS`,personalAccessToken:`Персональний токен доступу`,tokenSaved:`(збережено)`,enterNewToken:`Введіть новий токен для оновлення`,tokenHintGitHub:`Токен із деталізованими правами на читання й запис Contents або класичний токен з областю repo.`,tokenHintGitLab:`Токен з областю api або read_repository разом із write_repository.`,tokenHintGitea:`Токен з областю write:repository.`,tokenHintForgejo:`Токен з областю write:repository. Достатньо токена, обмеженого лише цим репозиторієм.`,branch:`Гілка`,provider:`Постачальник Git`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Тільки вручну`,hourly:`щогодини`,daily:`Щодня`,weekly:`Щотижня`,includeInBackup:`Включити в резервну копію`,kProfiles:`K-профілі`,kProfilesDescription:`Калібрування Pressure Advance (PA) від підключених принтерів`,noPrintersConnected:`Немає підключених принтерів`,printersConnected:`{{connected}}/{{total}} підключено`,cloudProfiles:`Хмарні профілі`,cloudProfilesDescription:`Попередні налаштування філаменту, принтера та процесу від Bambu Cloud і Orca Cloud`,cloudProfilesAccounts:`Підключені акаунти — Bambu Cloud: {{bambu}}, Orca Cloud: {{orca}}`,appSettings:`Налаштування програми`,appSettingsDescription:`Конфігурація Bambuddy (повна база даних)`,spoolInventory:`Облік котушок`,spoolInventoryDescription:`Котушки з філаментом, історія використання та відстеження витрат`,printArchives:`Архіви друку`,printArchivesDescription:`Метадані історії друку (без файлів gcode/3MF)`,lastBackupAt:`Остання резервна копія:`,noBackupsYet:`Резервних копій ще немає`,next:`Наступне виконання:`,startingBackup:`Початок резервного копіювання...`,test:`Тест`,enableBackup:`Увімкнути резервне копіювання`,testConnection:`Тестове підключення`,enterRepoUrl:`Введіть URL репозиторію`,enterRepoAndToken:`Введіть URL репозиторію та токен доступу`,repoRequired:`Потрібно вказати URL репозиторію`,tokenRequired:`Потрібен токен доступу`,githubBackupEnabled:`GitHub резервне копіювання ввімкнено`,tokenUpdated:`Токен оновлено`,settingsSaved:`Налаштування збережено`,failedToSave:`Не вдалося зберегти: {{message}}`,backupCompleteFiles:`Резервне копіювання завершено – файли {{count}} оновлено`,backupSkippedNoChanges:`Резервне копіювання пропущено – без змін`,backupFailed2:`Помилка резервного копіювання: {{message}}`,clearedLogs:`Очищено журнали {{count}}.`,failedToClearLogs:`Не вдалося очистити журнали: {{message}}`,restoreFromGit:{button:`Відновити з Git`,title:`Відновлення з резервної копії Git`,subtitle:`Виберіть коміт і вкажіть, що відновити`,commitLabel:`Коміт резервної копії`,latestCommit:`Остання резервна копія (вершина гілки)`,categoriesLabel:`Що відновити`,inspecting:`Читання вмісту резервної копії...`,itemCount:`{{count}} у резервній копії`,overwriteLabel:`Перезаписувати наявні записи`,overwriteOn:`Наявні записи буде оновлено з резервної копії.`,overwriteOff:`Додаються лише відсутні записи; наявні залишаються без змін.`,selectedCount:`Вибрано: {{count}}`,restoring:`Відновлення...`,confirmTitle:`Відновити з резервної копії?`,confirmMessage:`Вибрані категорії буде відновлено з цього коміту. Відсутні записи буде додано, наявні залишаться без змін.`,confirmMessageOverwrite:`Вибрані категорії буде відновлено з цього коміту з перезаписом записів, які вже існують локально. Цю дію не можна скасувати.`,kprofilesOverwriteCaveat:`K-профілі — виняток: запис у слот завжди замінює калібрування на принтері.`,tally:`відновлено: {{restored}}, пропущено: {{skipped}}, з помилкою: {{failed}}`,reloadHint:`Перезавантажте Bambuddy, щоб відновлені дані відобразилися всюди.`,partialHint:`Перелічені вище категорії завершено та збережено. Відсутні категорії не виконувалися.`,failed:`Не вдалося виконати відновлення.`,loadFailed:`Не вдалося прочитати репозиторій резервних копій.`,details:{notPresent:`Відсутнє в цьому коміті резервної копії`,unreadableJson:`Нечитабельний JSON: {{paths}}`,settingsNoPayload:`У даних немає налаштувань`,settingsCredentialsWillSkip:`Ключів, схожих на облікові дані, буде пропущено: {{count}}`,settingsCompanionWillSkip:`Ключів, схожих на облікові дані, буде пропущено: {{count}}, а залежні від них перемикачі ({{companion}}) залишаться вимкненими`,settingsCompanionOnlyWillSkip:`Перемикачі ({{companion}}) залишаться вимкненими - облікові дані, потрібні кожному з них, не можна відновити з резервної копії`,spoolsUsageCount:`включно із записами використання: {{count}}`,archivesMetadataOnly:`Лише метадані - файли 3MF і мініатюри не входять до резервної копії Git`,kprofilesPrinterCount:`по {{count}} принтерах`},notes:{noData:`У цій резервній копії немає даних такого типу`,archivesPrinterMissing:`Деякі архіви посилалися на принтери, яких більше немає - зв'язок очищено`,archivesProjectMissing:`Деякі архіви посилалися на проєкти, яких більше немає - зв'язок очищено`,archivesOwnerCleared:`Деякі архіви посилалися на користувачів, яких більше немає - власника очищено, тому вони видимі лише користувачам із дозволом archives:read_all, доки адміністратор не призначить власника знову`,archivesOwnerUnmatched:`Деякі архіви вказують власника, якого немає в цьому екземплярі - власника очищено, а не вгадано за ідентифікатором користувача з резервної копії, тому вони видимі лише користувачам із дозволом archives:read_all, доки адміністратор не призначить власника знову`,archivesOwnerUnknown:`Деякі архіви відновлено без власника - у цій резервній копії його не записано, тому вони видимі лише користувачам із дозволом archives:read_all, доки адміністратор не призначить власника`,archivesUndeleted:`Архіви, видалені після резервного копіювання, знову видимі - перезапис був увімкнений`,archivesMetadataOnly:`Відновлені архіви містять лише метадані - файли 3MF і мініатюри не входять до резервної копії Git`,spoolUsageUnresolved:`Записів використання пропущено: {{count}} - їхньої котушки немає у списку котушок цієї резервної копії, тож немає до чого їх прив'язати.`,spoolUsageUnlinked:`Записів використання відновлено без зв'язку з історією друку: {{count}} - виберіть «Архіви друку» разом з «Інвентарем котушок», щоб зберегти зв'язок.`,spoolTagKept:`Міток котушок залишено без змін: {{count}} - резервна копія стерла б мітку, відскановану пізніше, або перенесла б її на іншу котушку.`,settingsCredentialsSkipped:`Ключів, схожих на облікові дані, пропущено: {{count}} - введіть секрети вручну`,settingsAuthSkipped:`Налаштувань автентифікації пропущено: {{count}} - змінюйте їх у розділі «Налаштування > Автентифікація», щоб перевірки блокування й далі працювали`,settingsCompanionSkipped:`{{keys}} залишено вимкненими - потрібні їм облікові дані не можна відновити з резервної копії, і в цьому екземплярі вони не збережені, тож увімкнення залишило б інтеграцію без автентифікації`,settingsMqttRelayFailed:`Налаштування MQTT відновлено, але реле не вдалося перепідключити - перезапустіть Bambuddy`,kprofilesAlwaysOverwrite:`K-профілі завжди перезаписують відповідний слот на принтері`,kprofilesAckUnreliable:`Принтер, який не відповідає, усе одно вважається відновленим - перевірте профілі на принтері`,kprofilesPrinterMissing:`Немає принтера із серійним номером {{serial}} - пропущено`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) не підключено - пропущено`,kprofilesUnknownNozzle:`Неочікуваний діаметр сопла {{nozzle}} для {{serial}} - надіслано як є`,kprofilesUnmatched:`Профілів для {{nozzle}} без відповідника на {{printer}}: {{count}} - додано як нові профілі`,kprofilesSendFailed:`Не вдалося надіслати профілі {{nozzle}} на {{printer}} ({{serial}})`,kprofilesRefused:`{{printer}} ({{serial}}) відхилив профілі {{nozzle}}: {{reason}}`,kprofilesStepFailed:`Не вдалося завершити етап K-профілів - {{reason}}. Усе, що було відновлено до нього, збережено.`}},history:`історія`,clear:`Очистити`,date:`Дата`,status:`Статус`,trigger:`Тип`,triggers:{manual:`Резервна копія (вручну)`,scheduled:`Резервна копія (за розкладом)`,restore:`Відновлення`},commit:`Коміт`,localBackup:`Локальна резервна копія`,localBackupDescription:`Створити повну резервну копію даних Bambuddy, включно з базою даних, архівами, вивантаженнями та всіма файлами.`,downloadBackupLabel:`Завантажити резервну копію`,completeBackupZip:`Повне резервне копіювання: база даних + усі файли (ZIP)`,download:`Завантажити`,preparingBackup:`Підготовка резервної копії...`,creatingArchive:`Створення резервного архіву... Для великих архівів це може зайняти деякий час.`,downloadingFile:`Завантаження файлу резервної копії...`,backupDownloaded:`Резервну копію успішно завантажено`,failedToCreateBackup:`Не вдалося створити резервну копію: {{message}}`,restore:`Відновити`,restoreReplacesAll:`Відновлення замінює всі дані.`,restoreReplacesAllDetail:`Вашу поточну базу даних і файли буде повністю замінено. Після відновлення потрібен перезапуск.`,restoreConfirmTitle:`Відновити резервну копію`,restoreConfirmMessage:`Ви впевнені, що бажаєте відновити з "{{filename}}"? Це повністю замінить вашу поточну базу даних і всі файли. Після відновлення програму потрібно буде перезапустити.`,restoreConfirmButton:`Відновити резервну копію`,uploadingFile:`Вивантаження файлу резервної копії...`,backupRestoredRestart:`Резервну копію відновлено. Перезапустіть Bambuddy.`,failedToRestore:`Не вдалося відновити резервну копію. Будь ласка, перевірте формат файлу.`,reloadNow:`Перезавантажити зараз`,creatingBackup:`Створення резервної копії`,restoringBackup:`Відновлення з резервної копії`,preparing:`Підготовка...`,processing:`Обробка...`,doNotClosePage:`Будь ласка, не закривайте цю сторінку та не виходьте з неї. Для великих резервних копій ця операція може зайняти кілька хвилин.`,restoring:`Відновлення...`,restoreComplete:`Відновлення завершено`,restoreFailed2:`Не вдалося відновити`,importSettings:`Імпорт налаштувань із файлу резервної копії`,pleaseWaitRestoring:`Зачекайте, поки ваші дані відновляться`,selectBackupFile:`Натисніть, щоб вибрати файл резервної копії (.json або .zip)`,duplicateHandling:`Як працює обробка дублікатів:`,matchPrinters:`Принтери`,matchPrintersBy:`відповідає серійному номеру`,matchSmartPlugs:`Розумні розетки`,matchSmartPlugsBy:`зіставляються за IP-адресою`,matchNotificationProviders:`Постачальники сповіщень`,matchNotificationProvidersBy:`відповідність за назвою`,matchFilaments:`філаменти`,matchFilamentsBy:`відповідність за назвою + типом + брендом`,matchArchives:`Архіви`,matchArchivesBy:`відповідає хешу вмісту (завжди пропускається)`,matchPendingUploads:`Вивантаження, що очікують`,matchPendingUploadsBy:`зіставляються за назвою файлу`,matchSettingsTemplates:`Налаштування та шаблони`,matchSettingsTemplatesBy:`завжди перезаписується`,replaceExisting:`Замінити існуючі дані`,keepExisting:`Зберегти наявні дані`,overwriteDescription:`Замінити наявні елементи даними з резервної копії`,keepDescription:`Відновлюйте лише елементи, яких ще не існує`,overwriteCaution:`Увага:`,overwriteWarning:`Перезапис замінить ваші поточні конфігурації даними з резервної копії. Коди доступу до принтера ніколи не перезаписуються з міркувань безпеки.`,cancel:`Скасувати`,processingBackup:`Обробка файлу резервної копії...`,itemsRestored:`Елементів відновлено`,itemsSkipped:`Пропущено елементів`,restored:`Відновлено`,skippedAlreadyExist:`Пропущено (вже існує)`,filesCategory:`Файли (3MF, мініатюри тощо)`,andMore:`…і ще {{count}}`,newApiKeysGenerated:`Створено нові API ключі`,keysShownOnce:`Ці ключі відображаються лише один раз. Скопіюйте їх зараз!`,copy:`Копіювати`,noDataFound:`У файлі резервної копії не знайдено даних для відновлення.`,close:`Закрити`,scheduledBackup:`Резервне копіювання за розкладом`,scheduledBackupDescription:`Автоматично створюйте резервні знімки за розкладом. Вихідний каталог можна підключити до NAS або зовнішнього накопичувача.`,frequency:`Частота`,backupTime:`час`,retention:`Термін зберігання`,retentionDescription:`Кількість резервних копій, які потрібно зберегти`,outputPath:`Вихідний шлях`,outputPathPlaceholder:`За замовчуванням: {{path}}`,outputPathDescription:`Залиште порожнім для розташування за умовчанням`,runNow:`Запустити зараз`,backupFiles:`Файли резервних копій`,noScheduledBackups:`Резервних копій ще немає`,deleteBackup:`Видалити`,deleteBackupConfirm:`Видалити цей файл резервної копії?`,backupRunning:`Виконується резервне копіювання...`,scheduledBackupComplete:`Резервне копіювання успішно завершено`,scheduledBackupFailed:`Помилка резервного копіювання`,nextBackup:`Наступна резервна копія`,backupSize:`Розмір`,localTimeHint:`Місцевий час ({{tz}})`,defaultPathLabel:`За замовчуванням:`,pathCheck:{title:`Bambuddy не може писати в цей каталог`,howToFix:`Як виправити:`,sandboxed:`Служба Bambuddy не може писати в {{path}}. Його модуль systemd працює з ProtectSystem=strict, що робить кожен каталог за межами каталогів встановлення, даних і журналу доступними лише для читання для служби — навіть той, у який ви можете писати з власної оболонки.`,read_only:`{{path}} знаходиться у файловій системі лише для читання.`,permission_denied:`Bambuddy не має права записувати в {{path}}. Перевірте власника каталогу та дозволи.`,no_space:`У файловій системі, де розташовано {{path}}, закінчилося місце.`,not_a_directory:`{{path}} існує, але не є каталогом.`,missing:`{{path}} не існує і не може бути створений.`,error:`Bambuddy не може писати в {{path}}.`,ephemeralTitle:`Ці резервні копії не збережуться після перезапуску контейнера`,container_ephemeral:`{{path}} розташовано всередині контейнера Bambuddy, а не на хості. Резервні копії в цьому каталозі буде втрачено після повторного створення контейнера. Змонтуйте каталог із хоста:`},categories:{settings:`Налаштування`,notification_providers:`Постачальники сповіщень`,notification_templates:`Шаблони сповіщень`,smart_plugs:`Розумні розетки`,printers:`Принтери`,filaments:`філаменти`,maintenance_types:`Види технічного обслуговування`,archives:`Архіви`,projects:`Проєкти`,pending_uploads:`Вивантаження, що очікують`,external_links:`Зовнішні посилання`,api_keys:`Ключі API`}},tags:{title:`Теги`,addTag:`Додати тег`,editTag:`Редагувати тег`,deleteTag:`Видалити тег`,tagName:`Назва тегу`,tagColor:`Колір мітки`,noTags:`Без тегів`,deleteConfirm:`Ви впевнені, що бажаєте видалити цей тег?`,manageTags:`Керування тегами`},uploadModal:{title:`Вивантажити файли 3MF`,dragDrop:`Перетягніть файли .3mf сюди`,or:`або`,browseFiles:`Огляд файлів`,extractionInfo:`Модель принтера буде автоматично витягнуто з метаданих файлу 3MF.`,uploaded:`вивантажено`,failed:`не вдалося`,uploading:`Вивантаження...`,upload:`Вивантажити`,uploadFailed:`Не вдалося вивантажити`},editArchive:{title:`Редагувати архів`,name:`Назва`,namePlaceholder:`Друкування імені`,printer:`Принтер`,noPrinter:`Немає принтера`,project:`Проєкт`,noProject:`Жодного проєкту`,itemsPrinted:`Надруковано об’єктів`,itemsPrintedHelp:`Кількість елементів, виготовлених у цьому завданні друку. Укажіть 0, якщо зіпсовано всю пластину.`,filamentUsed:`Витрачений філамент (г)`,filamentUsedPlaceholder:`напр. 46.16`,filamentUsedHelp:`Вкажіть вручну, якщо друк заархівовано без 3MF — тоді він потрапить до підсумків з філаменту. Повторне сканування архіву, який має 3MF, зчитує значення з файлу.`,notes:`Примітки`,notesPlaceholder:`Додайте примітки щодо цього друку...`,externalLink:`Зовнішнє посилання`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Посилання на Printables, Thingiverse або інше джерело`,tags:`Теги`,tagsPlaceholder:`Додати теги...`,addMoreTags:`Додати більше тегів...`,matchingTags:`Відповідає "{{query}}"`,existingTags:`Існуючі теги`,clickToAdd:`(натисніть, щоб додати)`,status:`Статус`,failureReason:`Причина невдачі`,selectReason:`Виберіть причину...`,photos:`Фотографії надрукованих результатів`,photosHelp:`Натисніть +, щоб додати фотографії результату друку`,printResult:`Роздрукувати результат`,saving:`Збереження...`,failureReasons:{adhesionFailure:`Порушення адгезії`,spaghettiDetached:`Спагетті / Відр`,layerShift:`Зсув шару`,cloggedNozzle:`Засмічене сопло`,filamentRunout:`Биття філаменту`,warping:`Викривлення`,stringing:`Нанизування`,underExtrusion:`Підвидавлювання`,powerFailure:`Збій живлення`,userCancelled:`Користувач скасовано`,noStatusUpdate:`Оновлення статусу не отримано`,other:`інше`},statuses:{completed:`Виконано`,failed:`Не вдалося`,aborted:`Скасовано`,printing:`Друк`}},kProfiles:{title:`K-профілі`,noPrintersConfigured:`Принтери не налаштовані`,addPrinterInSettings:`Додайте принтер у налаштуваннях, щоб керувати K-профілями`,noActivePrinters:`Немає активних принтерів`,enablePrinterConnection:`Увімкніть підключення до принтера, щоб переглянути його K-профілі`,loadingProfiles:`Завантаження K-профілів...`,printerOffline:`Принтер не в мережі`,printerOfflineDesc:`Вибраний принтер не підключено. Увімкніть його, щоб переглянути K-профілі.`,noMatchingProfiles:`Немає відповідних профілів`,noMatchingProfilesDesc:`Немає профілів, які відповідають вашим критеріям пошуку`,noKProfiles:`Без K-профілів`,noKProfilesDesc:`Не знайдено профілів підвищення тиску для сопла {{diameter}} мм`,createFirstProfile:`Створити перший профіль`,printer:`Принтер`,nozzle:`Сопло`,refresh:`Оновити`,addProfile:`Додати профіль`,export:`Експорт`,import:`Імпорт`,select:`Вибрати`,selectAll:`Вибрати усі`,delete:`Видалити`,searchPlaceholder:`Пошук за назвою або філаментом...`,allExtruders:`Всі екструдери`,leftOnly:`Тільки зліва`,rightOnly:`Тільки право`,allFlow:`Весь потік`,hfOnly:`Тільки HF`,sOnly:`Тільки S`,sortName:`Сортувати за назвою`,sortKValue:`Сортувати: К-значення`,sortFilament:`Сорт: філамент`,leftExtruder:`Лівий екструдер`,rightExtruder:`Правий екструдер`,modal:{addTitle:`Додати K-профіль`,editTitle:`Редагувати K-профіль`,profileName:`Назва профілю`,profileNamePlaceholder:`Мій профіль PLA.`,kValue:`К-значення`,kValuePlaceholder:`0,020`,kValueHelp:`Типовий діапазон: 0,01–0,06 для PLA, 0,02–0,10 для PETG`,filament:`Філамент`,selectFilament:`Виберіть філамент...`,source:{local:`Імпортовані`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Вбудований`},noFilamentsHelp:`Немає доступних філаментів. Увійдіть у Bambu Cloud або імпортуйте пресети в розділі Профілі → Локальні профілі.`,searchFilaments:`Пошук філаментів...`,noFilamentMatches:`Немає філаментів, що відповідають запиту`,flowType:`Тип потоку`,highFlow:`Сопло з високим потоком`,standard:`Стандартний`,nozzleSize:`Розмір сопла`,extruder:`Екструдер`,extruders:`Екструдери`,left:`Ліворуч`,right:`правильно`,notes:`Примітки (зберігаються локально)`,notesPlaceholder:`Додайте примітки щодо цього профілю...`,notesHelp:`Примітки зберігаються в Bambuddy, а не на принтері`,syncing:`Синхронізація з принтером...`,savingExtruder:`Збереження в екструдер {{current}}/{{total}}...`,pleaseWait:`Будь ласка, зачекайте`},deleteConfirm:{title:`Видалити профіль`,cannotUndo:`Це неможливо скасувати`,message:`Ви впевнені, що хочете видалити "{{name}}" із принтера?`},bulkDelete:{title:`Видалити профілі`,cannotUndo:`Це неможливо скасувати`,message:`Ви впевнені, що бажаєте видалити {{count}} вибрані профілі з принтера?`},toast:{profileSaved:`K-профіль збережено`,profilesSaved:`K-профіль збережено в екструдери {{count}}.`,selectAtLeastOneExtruder:`Виберіть принаймні один екструдер`,selectFilament:`Спочатку виберіть філамент`,filamentNotResolvable:`Немає ідентифікатора філаменту Bambu для {{name}} — принтер не зможе зберегти профіль`,profileDeleted:`K-профіль видалено`,profilesDeleted:`Видалені профілі {{count}}.`,exportedProfiles:`Експортовані профілі {{count}}.`,importedProfiles:`Імпортовано {{count}} з {{total}} профілів`,noProfilesToExport:`Немає профілів для експорту`,invalidFileFormat:`Недійсний формат файлу`,failedToParseImport:`Не вдалося проаналізувати імпортований файл`,failedToSaveBatch:`Не вдалося зберегти K-профілі`,noteSaved:`Нотатку збережено`,failedToSaveNote:`Не вдалося зберегти нотатку`},permission:{noRead:`Ви не маєте дозволу оновлювати профілі`,noCreate:`Ви не маєте дозволу додавати профілі`,noUpdate:`Ви не маєте дозволу на оновлення K-профілів`,noDelete:`Ви не маєте дозволу на видалення K-профілів`,noExport:`Ви не маєте дозволу на експорт профілів`,noImport:`Ви не маєте дозволу на імпорт профілів`}},virtualPrinter:{title:`Віртуальний принтер`,running:`Працює`,stopped:`Зупинено`,description:{default:`Увімкніть віртуальний принтер, який відображатиметься в Bambu Studio та OrcaSlicer. Надіслані на нього файли буде одразу заархівовано без друку.`,proxy:`Увімкніть проксі, який передає трафік слайсера на реальний принтер і дає змогу друкувати віддалено через будь-яку мережу.`},enable:{title:`Увімкнути віртуальний принтер`,visibleInSlicer:`Відображається як "Bambuddy" у виявленні слайсера`,proxyingTo:`Проксування до {{name}}`,notActive:`Неактивний`},model:{title:`Модель принтера`,description:`Виберіть модель принтера для емуляції.`,restartWarning:`Зміна моделі перезапустить віртуальний принтер`},accessCode:{title:`Код доступу`,isSet:`Код доступу встановлено`,notSet:`Немає встановленого коду доступу – потрібно для ввімкнення`,placeholder:`Введіть 8-символьний код`,placeholderChange:`Введіть новий код для зміни`,hint:`Має бути рівно 8 символів. Використовується слайсерами для автентифікації.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Успадковано від цільового принтера`,derivedFromTargetHint:`Використовує код доступу цільового принтера. Міст пересилає автентифікацію слайсера на справжній принтер, тому коди мають збігатися — відредагуйте код доступу принтера, щоб змінити це значення.`,reveal:`Показати код доступу`,hide:`Приховати код доступу`},targetPrinter:{title:`Цільовий принтер`,configured:`Ціль проксі налаштовано`,notConfigured:`Цільовий принтер не вибрано – потрібен для режиму проксі`,placeholder:`Виберіть принтер...`,hint:`Виберіть принтер, на який проксі передаватиме трафік слайсера. Принтер має працювати в режимі LAN.`,noPrinters:`Принтери не налаштовані. Щоб використовувати режим проксі, спочатку додайте принтер.`},remoteInterface:{title:`Перевизначення мережевого інтерфейсу`,configured:`Перевизначення інтерфейсу активне`,optional:`Необов’язково – використовуйте, якщо автоматичне визначення IP є неправильним (наприклад, кілька мережевих карток, Docker, VPN)`,placeholder:`Автоматичне визначення (за замовчуванням)...`,hint:`Заміна адреси IP, яка оголошується через SSDP і використовується в сертифікаті TLS. Корисно, коли Bambuddy має кілька мережевих інтерфейсів.`},mode:{title:`Режим`,archive:`Архів`,archiveDesc:`Одразу архівувати файли`,review:`Перевірка`,reviewDesc:`Перевіряти перед архівуванням`,queue:`Черга`,queueDesc:`Архівувати та додати в чергу`,proxy:`Проксі`,proxyDesc:`Пересилати на фізичний принтер`},autoDispatch:{title:`Автоматичний запуск`,description:`Автоматично запускати завдання після додавання до черги. Якщо вимкнено, завдання чекатимуть ручного запуску.`},queueForceColorMatch:{title:`Примусовий збіг кольорів`,description:`Не надсилати завдання на принтер без філаменту точного типу й кольору. Типово вимкнено: без цього черга зіставляє лише модель і може вибрати принтер із філаментом іншого кольору.`},saveAmsMapping:{title:`Зберігати зіставлення AMS`,description:`Зберігати в записі вибір слота AMS, зроблений самим слайсером (з MQTT-команди project_file), щоб пізніший повторний друк використав ту саму фізичну котушку замість повторного визначення за типом/кольором файлу. Типово вимкнено.`},gcodeInjection:{title:`Вставлення G-коду`,description:`Застосовувати до завдань цього віртуального принтера фрагменти G-коду, налаштовані для кожної моделі. Типово вимкнено.`},tailscaleDisabled:{title:`Інтеграція з Tailscale`,description:`Увімкніть, щоб позначити цей віртуальний принтер як доступний через Tailscale. Буде показано Tailscale-адресу хоста, яку потрібно ввести в слайсері. Імпорт сертифіката ЦС залишається обов’язковим; цей перемикач не впливає на сертифікати.`},setupRequired:{title:`Потрібне налаштування`,description:`Для роботи функції віртуального принтера потрібна додаткова конфігурація системи. Це включає переадресацію портів, правила брандмауера та параметри, що стосуються платформи.`,readGuide:`Перед увімкненням прочитайте посібник із налаштування`},archiveNameSource:{title:`Джерело назви архіву`,description:`Виберіть, як називати нові архіви, що надходять через віртуальний принтер. «Метадані» використовують вбудоване слайсером поле Title з 3MF (типовий варіант). «Назва файлу» використовує назву, яку Bambu Studio надіслала через FTP. За наявності поля Title Bambu Studio замінює ним назву, введену у вікні «Надіслати на принтер», тому обидва режими часто дають однаковий результат.`,metadata:`Метадані`,filename:`Назва файлу`},caCert:{title:`Сертифікат слайсера`,description:`Віртуальні принтери використовують сертифікат TLS, підписаний ЦС Bambuddy. Імпортуйте цей сертифікат ЦС у довірче сховище вашого слайсера, щоб він прийняв з’єднання — не потрібно копіювати його з командного рядка.`,copy:`Копіювати`,copied:`Скопійовано`,download:`Завантажити`,fingerprint:`SHA-256`},howItWorks:{title:`Як це працює`,step1:`У тій самій локальній мережі віртуальні принтери автоматично з’являються в слайсері (Bambu Studio або OrcaSlicer). З інших мереж додайте їх вручну за IP-адресою та кодом доступу.`,step2:`У режимах архівування, перевірки та черги натисніть «Надіслати» у слайсері, щоб вивантажити файли 3MF до Bambuddy. Слайсер покаже повідомлення про успішний друк, але файл буде лише збережено, а не надруковано.`,step3:`У режимі проксі-сервера віртуальний принтер передає весь трафік на справжній принтер — друк починається негайно, ніби підключений безпосередньо.`},status:{title:`Деталі статусу`,printerName:`Назва принтера`,model:`Модель`,serialNumber:`Серійний номер`,mode:`Режим`,pendingFiles:`Файли, що очікують на розгляд`,targetPrinter:`Цільовий принтер`,ftpPort:`Порт FTP`,mqttPort:`Порт MQTT`,ftpConnections:`Підключення FTP`,mqttConnections:`Підключення MQTT`},toast:{updated:`Налаштування віртуального принтера оновлено`,failedToUpdate:`Не вдалося оновити налаштування`,copyFailed:`Не вдалося скопіювати — спробуйте вибрати текст вручну`,accessCodeRequired:`Спочатку встановіть код доступу`,targetPrinterRequired:`Спочатку виберіть цільовий принтер`,bindIpRequired:`Спочатку встановіть прив’язку IP.`,accessCodeEmpty:`Код доступу не може бути порожнім`,accessCodeLength:`Код доступу має містити рівно 8 символів`,targetCodeChangedRebind:`Код доступу тепер відповідає новому цільовому принтеру. Повторно додайте цей пристрій у свій слайсер, щоб отримати новий код.`,created:`Створено віртуальний принтер`,failedToCreate:`Не вдалося створити віртуальний принтер`,deleted:`Віртуальний принтер видалено`,failedToDelete:`Не вдалося видалити віртуальний принтер`},list:{title:`Віртуальні принтери`,add:`додати`,addFirst:`Додати віртуальний принтер`,empty:`Віртуальні принтери не налаштовані. Додайте один, щоб почати.`},bindIp:{title:`Інтерфейс прив’язки`,placeholder:`Виберіть інтерфейс...`,hint:`Мережевий інтерфейс, до якого прив’язуватиметься цей віртуальний принтер. Для кожного принтера він має бути унікальним.`},proxy:{accessCodeHint:`У режимі проксі використовуйте код доступу цільового принтера в слайсері. З’єднання прозоро пересилається на справжній принтер.`},addDialog:{title:`Додати віртуальний принтер`,name:`Назва`,hint:`Ви можете налаштувати код доступу, цільовий принтер та інші параметри після створення.`,create:`Створити`},deleteConfirm:{title:`Видалити віртуальний принтер`,message:`Ви впевнені, що хочете видалити «{{name}}»? Усі служби цього принтера буде зупинено.`}},modelViewer:{openInSlicer:`Відкрити у слайсері`,openInSlicerWith:`Відкрити у {{slicer}}`,moreSlicerOptions:`Більше варіантів слайсера`,openInSlicerFailed:`Не вдалося відкрити у слайсері`,tabs:{model:`3D-модель`},notAvailable:`недоступно`,plates:`Пластини`,allPlates:`Усі пластини`,plateNumber:`Пластина {{number}}`,plateCount:`Пластин: {{count}}`,plateCount_other:`Пластин: {{count}}`,objectCount:`Об’єктів: {{count}}`,objectCount_other:`Об’єктів: {{count}}`,filamentCount:`Філаментів: {{count}}`,filamentCount_other:`Філаментів: {{count}}`,eta:`ETA {{minutes}} хв`,noPreview:`Попередній перегляд цього файлу недоступний`,pagination:{pageOf:`Сторінка {{current}} з {{total}}`,prev:`Назад`,next:`Далі`},errors:{failedToLoad:`Не вдалося завантажити файл`,noMeshes:`У файлі 3MF не знайдено жодної сітки`,unsupportedFormat:`Непідтримуваний формат файлу`}},maintenanceDescriptions:{lubricateCarbonRods:`Нанесіть мастило на карбонові стрижні для плавного руху`,lubricateRails:`Нанесіть мастило на лінійні рейки для плавного руху`,cleanNozzle:`Очистіть нагрівач і сопло, щоб запобігти засміченню`,checkBelts:`Перевірте натяг ременя для точного друку`,cleanBuildPlate:`Очистіть будівельну пластину для кращого зчеплення`,checkExtruder:`Перевірте шестерні екструдера на знос`,checkCooling:`Переконайтеся, що вентилятори охолодження працюють належним чином`,generalInspection:`Загальний огляд принтера`,cleanCarbonRods:`Очистіть карбонові стрижні, щоб зменшити тертя`,lubricateSteelRods:`Нанесіть мастило на сталеві стрижні для плавного руху`,cleanSteelRods:`Очистіть сталеві стрижні, щоб зменшити тертя`,cleanLinearRails:`Протріть лінійні рейки, щоб видалити пил і сміття`,checkPtfeTube:`Перевірте трубку PTFE на знос або пошкодження`,replaceHepaFilter:`Замініть фільтр HEPA для забезпечення якості повітря`,replaceCarbonFilter:`Замініть фільтр з активованим вугіллям`,lubricateLeftNozzleRail:`Змастіть ліву рейку сопла (серія H2)`},haSensors:{label:`Датчики`,unavailable:`Недоступно`,blocksPrints:`{{entity}} — утримує друк, поки триває сповіщення`,states:{open:`Відчинено`,closed:`Зачинено`,unlocked:`Розблоковано`,locked:`Заблоковано`,detected:`Виявлено`,clear:`Чисто`,wet:`Волого`,dry:`Сухо`,problem:`Проблема`,ok:`Норма`,running:`Працює`,stopped:`Зупинено`,on:`Увімк`,off:`Вимк`},sectionTitle:`Датчики Home Assistant (принтери)`,add:`Додати датчик`,addTitle:`Додати датчик Home Assistant`,editTitle:`Редагувати датчик Home Assistant`,empty:`Датчиків ще немає. Прив'яжіть дверний контакт або термометр із Home Assistant, щоб показати його на картці принтера.`,unknownPrinter:`Невідомий принтер`,badgeBlocks:`Утримує друк`,badgeNotifies:`Сповіщає`,badgeHidden:`Приховано на картці`,printer:`Принтер`,entity:`Сутність`,searchPlaceholder:`Пошук сутностей...`,noEntities:`Немає відповідних сутностей`,name:`Відображувана назва`,alertWhen:`Сповіщати коли`,alertNever:`Ніколи — лише показувати`,alertAbove:`Вище`,alertBelow:`Нижче`,alertHint:`Стан сповіщення підсвічує датчик на картці принтера та вмикає параметри нижче.`,showOnCard:`Показувати на картці принтера`,notifyOnAlert:`Надсилати сповіщення, коли спрацьовує`,blockPrint:`Утримувати друк у черзі, поки триває сповіщення`,blockPrintHint:`Завдання лишаються в черзі й запускаються самі, коли датчик повертається до норми. Ігнорується, поки Home Assistant недоступний.`,toast:{created:`Датчик додано`,updated:`Датчик збережено`,deleted:`Датчик видалено`},error:{pickEntity:`Оберіть сутність Home Assistant`,nameRequired:`Введіть відображувану назву`,printerRequired:`Оберіть принтер`,alertRequired:`Спершу задайте умову сповіщення`}},locationHaSensors:{sectionTitle:`Датчики Home Assistant (місця зберігання)`,sectionDescription:`Прив'яжіть датчики температури, вологості або заряду батареї Home Assistant до місць зберігання, щоб показувати актуальні значення на картці філаменту і в таблиці. Для кожного місця зберігання дозволено лише один датчик на категорію.`,add:`Додати датчик`,addTitle:`Додати датчик Home Assistant`,editTitle:`Редагувати датчик Home Assistant`,empty:`Датчиків ще немає. Прив'яжіть датчик температури або вологості з Home Assistant, щоб показати його на картці філаменту.`,unknownLocation:`Невідоме місце`,location:`Місце зберігання`,showOnCard:`Показувати на картці філаменту`,overwriteConfirm:{title:`Замінити наявний датчик?`,messageTemperature:`«{{location}}» вже має прив'язаний датчик температури: {{name}}. Продовження замінить його.`,messageHumidity:`«{{location}}» вже має прив'язаний датчик вологості: {{name}}. Продовження замінить його.`,messageBattery:`«{{location}}» вже має прив'язаний датчик заряду батареї: {{name}}. Продовження замінить його.`},autoAdd:{confirmTitle:`Додати також інші датчики?`,confirmMessage:`Bambuddy також знайшов інші датчики для цього місця. Виберіть, які додати.`,added:`Також додано: {{names}}`,noneFound:`Відповідних датчиків температури, вологості чи заряду батареї для цього місця не знайдено.`,onlyThisOne:`Лише цей`},options:{buttonLabel:`Параметри датчиків`,title:`Параметри датчиків місця зберігання`,description:`Ці значення використовуються, коли датчик температури, вологості чи заряду батареї автоматично прив'язується разом із першим датчиком місця зберігання.`,generalSettings:`Загальні налаштування`,pollInterval:`Інтервал оновлення (секунди)`,pollIntervalHint:`Як часто Bambuddy опитує Home Assistant і оновлює значення датчиків на екрані. Мінімум 60 секунд.`,colorizeValues:`Розфарбовувати значення датчиків відповідно до порогів тривоги`,aboveColor:`Колір перевищення порогу`,belowColor:`Колір нижче порогу`,optimalColor:`Колір оптимального значення`,colors:{red:`Червоний`,orange:`Помаранчевий`,yellow:`Жовтий`,green:`Зелений`,blue:`Синій`,purple:`Фіолетовий`,pink:`Рожевий`},saved:`Параметри збережено`,saveFailed:`Не вдалося зберегти параметри`,reset:`Скинути`,resetConfirm:{title:`Скинути всі наявні датчики місць зберігання?`,message:`Це замінить пороги тривоги, сповіщення та видимість на картці для всіх наявних датчиків температури, вологості та заряду батареї місць зберігання значеннями, вказаними вище, а також відновить ім'я кожного датчика до його зрозумілої назви в Home Assistant — датчики принтерів не зачіпаються. Цю дію не можна скасувати. Залежно від кількості датчиків це може зайняти деякий час.`},resetDone:`Застосовано до {{count}} датчиків місць зберігання`,resetFailed:`Не вдалося скинути датчики місць зберігання`},deleteAllConfirm:{title:`Видалити всі датчики?`,message:`Це видалить усі {{count}} датчиків, прив'язаних до «{{location}}». Цю дію не можна скасувати.`},currentlyBound:`Наразі прив'язано: {{entity}}`,error:{locationRequired:`Оберіть місце зберігання`},toast:{created:`Датчик додано`,updated:`Датчик збережено`,deleted:`Датчик видалено`}},smartPlugs:{offline:`Не в мережі`,admin:`Адміністрування`,openPlugAdminPage:`Відкрити сторінку адміністратора розетки`,deleteSmartPlug:`Видалити розумну розетку`,turnOnSmartPlug:`Увімкнути розумну розетку`,turnOffSmartPlug:`Вимкнути розумну розетку`,turnOn:`Увімкнути`,turnOff:`Вимкнути`,addSmartPlug:{scanningNetwork:`Сканування мережі...`,chooseEntity:`Виберіть сутність…`,connectionFailed:`Помилка підключення`,searchEntities:`Пошук сутностей...`,searchPowerSensors:`Пошук датчиків потужності...`,searchEnergySensors:`Пошук датчиків енергії...`,placeholders:{plugName:`Розетка у вітальні`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Та сама тема, що й для потужності, або інша`}},linkedTo:`Пов’язано з:`,monitorOnly:`Лише моніторинг`,alerts:`Оповіщення`,scheduleOn:`Увімкнення: {{time}}`,scheduleOff:`Вимкнення: {{time}}`,on:`Увімкнено`,off:`Вимкнено`,power:`Потужність`,kwhToday:`кВт·год сьогодні`,settings:`Налаштування`,automationSettings:`Налаштування автоматизації`,showInSwitchbar:`Показати на панелі перемикачів`,quickAccessSidebar:`Швидкий доступ із бічної панелі`,enabled:`Увімкнено`,enableAutomation:`Увімкнути автоматизацію для цієї розетки`,autoOn:`Автоматичне ввімкнення`,autoOnDescription:`Увімкнути на початку друку`,autoOff:`Автоматичне вимкнення`,autoOffDescription:`Вимкнути після завершення друку (одноразово)`,autoOffPersistent:`Залишити ввімкненим`,autoOffPersistentDescription:`Залишати ввімкненою між друками, а не лише після одного завдання`,controlsPrinterPower:`Живить принтер`,controlsPrinterPowerDescription:`Вимкніть цей параметр, якщо розетка живить лише аксесуар — наприклад, вентилятор фільтра або освітлення. Інакше вимкнення розетки позначатиме принтер як недоступний.`,autoOffAfterDrying:`Автоматичне вимкнення після сушіння`,autoOffAfterDryingDescription:`Вимкнути після завершення сушіння AMS`,delayAfterDryingMinutes:`Затримка після сушіння (хв)`,turnOffDelayMode:`Режим затримки вимкнення`,time:`Час`,temp:`Температура`,delayMinutes:`Затримка (хвилин)`,tempThreshold:`Температурний поріг (°C)`,tempThresholdDescription:`Вимикається, коли сопло охолоне нижче цієї температури`,edit:`Редагувати`,deleteConfirm:`Ви впевнені, що хочете видалити "{{name}}"? Це неможливо скасувати.`,turnOnConfirm:`Ви впевнені, що бажаєте ввімкнути "{{name}}"?`,turnOffConfirm:`Ви впевнені, що бажаєте вимкнути "{{name}}"? Це призведе до відключення живлення підключеного пристрою.`,failedToTurn:`Не вдалося змінити стан «{{name}}» ({{action}})`,unknown:`Невідомий`,addTitle:`Додати розумну розетку`,editTitle:`Редагувати розумну розетку`,stopScanning:`Зупинити сканування`,discoverTasmota:`Виявити пристрої Tasmota`,foundDevices:`Знайдено {{count}} пристроїв - натисніть, щоб вибрати:`,noDevicesFound:`У вашій мережі не знайдено пристроїв Tasmota.`,haNotConfigured:`Home Assistant не налаштовано. Налаштуйте його в`,haSettingsPath:`Налаштування → Мережа → Home Assistant`,selectEntity:`Вибрати сутність *`,ipAddress:`IP Адреса *`,nameLabel:`Назва *`,username:`Ім’я користувача`,password:`Пароль`,authHint:`Залиште поле пустим, якщо ваш пристрій Tasmota не вимагає автентифікації`,linkToPrinter:`Прив’язати до принтера`,noPrinter:`Без принтера (лише ручне керування)`,linkingDescription:`Прив’язування дає змогу автоматично вмикати й вимикати розетку на початку та після завершення друку`,powerAlerts:`Сповіщення про живлення`,alertAbove:`Сповіщати, якщо вище (Вт)`,alertBelow:`Сповіщати, якщо нижче (Вт)`,alertDescription:`Сповіщати, коли споживана потужність перетинає ці пороги. Залиште відповідне поле порожнім, щоб вимкнути сповіщення для цього напрямку.`,dailySchedule:`Щоденний розклад`,turnOnAt:`Увімкнути о`,turnOffAt:`Вимкнути о`,scheduleDescription:`Щодня автоматично вмикати й вимикати розетку в зазначений час. Залиште поле порожнім, щоб пропустити відповідну дію.`,showOnPrinterCard:`Показати на картці принтера`,displayOnPrinterCard:`Показувати кнопку на картці принтера`,connectedResult:`Підключено!`,deviceLabel:`Пристрій: {{name}} - `,stateLabel:`Стан: {{state}}`,test:`Тест`,delete:`Видалити`,save:`Зберегти`,add:`Додати`,cancel:`Скасувати`,failedToStartScan:`Не вдалося почати сканування`,nameRequired:`Необхідно вказати ім’я`,entityRequired:`Сутність необхідна для розеток Home Assistant.`,mqttTopicRequired:`Для моніторингу потужності, енергії або стану потрібно налаштувати принаймні одну тему MQTT`,loadingEntities:`Завантаження об’єктів...`,loading:`Завантаження...`,failedToLoadEntities:`Не вдалося завантажити сутності: {{error}}`,noEntitiesMatching:`Не знайдено об’єктів, що відповідають "{{search}}"`,noEntitiesAvailable:`Немає доступних сутностей`,searchingEntities:`Пошук у всіх об’єктах ({{count}} знайдено)`,showingEntities:`Показано сутності switch, light та input_boolean (доступно: {{count}})`,energyMonitoringOptional:`Моніторинг енергії (необов’язково)`,energyMonitoringHint:`Знайдіть і виберіть датчики, що надають дані про потужність або споживання енергії.`,powerSensorW:`Датчик потужності (Вт)`,energyTodayKwh:`Споживання за сьогодні (кВт·год)`,totalEnergyKwh:`Загальне споживання енергії (кВт·год)`,noMatchingSensors:`Немає відповідних датчиків`,none:`Жодного`,mqttNotConfigured:`MQTT-брокер не налаштований. Укажіть адресу брокера в розділі`,mqttSettingsPath:`Налаштування → Мережа → Публікація MQTT`,mqttNotConfiguredSuffix:`(вмикати публікацію не потрібно — достатньо вказати параметри брокера).`,mqttMonitorOnlyDescription:`MQTT-розетки отримують дані про потужність і споживання енергії через підписку MQTT. Керування ввімкненням і вимкненням недоступне — використовуйте MQTT-брокер або систему домашньої автоматизації.`,powerMonitoring:`Моніторинг потужності`,energyMonitoring:`Моніторинг споживання енергії`,stateMonitoring:`Моніторинг стану`,optional:`необов’язково`,topic:`Тема`,jsonPath:`Шлях JSON`,multiplier:`Множник`,onValue:`Значення «увімкнено»`,mqttPowerHint:`Шлях JSON витягує значення з корисного навантаження JSON (наприклад, "power_l1"). Залиште поле порожнім, якщо тема публікує безпосередньо числові значення.
+Значение «включено» — точная строка, означающая включённое состояние. Оставьте пустым для автоматического распознавания ON, true и 1.`,restControl:`Управление`,restOnUrl:`URL включения`,restOffUrl:`URL выключения`,restOnBody:`Тело запроса включения`,restOffBody:`Тело запроса выключения`,restMethod:`Метод HTTP`,restHeaders:`Пользовательские заголовки (JSON)`,restStatusUrl:`URL состояния`,restStatusPath:`Путь JSON состояния`,restStatusOnValue:`Значение «включено»`,restPowerUrl:`URL мощности`,restPowerPath:`Путь JSON мощности`,restPowerMultiplier:`Множитель мощности`,restEnergyUrl:`URL энергии`,restEnergyPath:`Путь JSON энергии`,restEnergyTotalPath:`Путь JSON полной энергии`,restEnergyTotalMultiplier:`Множитель полной энергии`,restEnergyTotalPathHint:`например, aenergy.total`,restEnergyTotalHint:`Многие розетки, включая все устройства Shelly, передают только накопительный счётчик энергии, который никогда не сбрасывается. Его следует указывать здесь, а не в поле выше: если считать его суточным расходом, значение не сбросится в полночь, а данные за вчера и общий расход останутся пустыми. Bambuddy вычисляет расход за сегодня и вчера по этому счётчику; для накопления данных потребуется один-два дня. Shelly передаёт ватт-часы, поэтому используйте множитель 0.001.`,restEnergyMultiplier:`Множитель энергии`,restUrlRequired:`Для REST-розетки необходимо указать хотя бы один URL: включения или выключения`,restHeadersHint:`например, {"Authorization": "Bearer your-token"}`,restBodyHint:`например, ON или {"state": "on"}`,restStatusHint:`URL для опроса текущего состояния`,restPathHint:`например, state или data.power.status`,restPowerUrlHint:`Отдельный URL данных мощности; если пусто, используется URL состояния`,restEnergyUrlHint:`Отдельный URL данных энергии; если пусто, используется URL состояния`,restEnergyHint:`Для каждого значения можно использовать отдельный URL либо URL состояния. Множители используются для преобразования единиц, например 0.001 для Вт·ч→кВт·ч.`,testConnection:`Проверить подключение`,connectionSuccess:`Подключение успешно`,noSwitchesInSwitchbar:`На панели переключателей нет устройств`,enableSwitchbarHint:`Включите «Показывать на панели переключателей» в разделе «Настройки → Умные розетки»`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`Электронная почта`,discord:`Discord`,webhook:`Вебхук`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`Уведомления по электронной почте через SMTP`,telegram:`Уведомления через Telegram-бота`,discord:`Отправка в канал Discord через вебхук`,ntfy:`Бесплатные push-уведомления с возможностью самостоятельного размещения сервера`,pushover:`Простые и надёжные push-уведомления`,callmebot:`Бесплатные уведомления WhatsApp через CallMeBot`,webhook:`Универсальный HTTP POST-запрос на любой URL`,homeassistant:`Постоянные уведомления на панели Home Assistant`,bark:`iOS push-уведомления через Bark (можно разместить у себя)`},lastSuccess:`Последняя отправка: {{date}}`,error:`Ошибка`,printer:`Принтер:`,allPrinters:`Все принтеры`,sendTestNotification:`Отправить тестовое уведомление`,eventSettings:`Настройки событий`,enabled:`Включено`,sendFromProvider:`Отправлять уведомления через этого провайдера`,printEvents:`События печати`,printerStatus:`Состояние принтера`,amsAlarms:`Предупреждения AMS`,amsHtAlarms:`Предупреждения AMS-HT`,printQueue:`Очередь печати`,start:`Запуск`,plateCheck:`Проверка пластины`,complete:`Завершено`,failed:`Ошибка`,stopped:`Остановлено`,progress:`Ход печати`,offline:`Не в сети`,lowFilament:`Мало филамента`,maintenance:`Обслуживание`,amsHumidity:`Влажность AMS`,amsTemp:`Температура AMS`,amsDryingSuspended:`Сушка приостановлена`,amsHtHumidity:`Влажность AMS-HT`,amsHtTemp:`Температура AMS-HT`,bedCooled:`Стол остыл`,firstLayer:`Первый слой`,quiet:`Тихий режим`,digest:`Сводка в {{time}}`,printStarted:`Печать началась`,plateNotEmpty:`Пластина не пуста`,plateNotEmptyDescription:`Перед печатью на пластине обнаружены объекты`,plateClearRequired:`Требуется подтверждение стола`,plateClearRequiredDescription:`Печать завершена, очередь ждет подтверждения`,plateClear:`Стол свободен`,printCompleted:`Печать завершена`,bedCooledLabel:`Стол остыл`,bedCooledDescription:`После печати температура стола опустилась ниже заданного порога`,firstLayerCompleteLabel:`Первый слой завершён`,firstLayerCompleteDescription:`Уведомить со снимком после завершения первого слоя`,missingSpoolAssignmentLabel:`Катушка не назначена`,billingChargeFailedLabel:`Ошибка списания`,billingChargeFailedDescription:`Уведомлять, если не удалось учесть стоимость печати`,missingSpoolAssignmentDescription:`Уведомить при запуске печати, если для необходимых слотов не назначены катушки`,printFailed:`Ошибка печати`,printStopped:`Печать остановлена`,progressMilestones:`Этапы выполнения`,progressMilestonesDescription:`Уведомлять при 25%, 50% и 75%`,printerOffline:`Принтер не в сети`,printerError:`Ошибка принтера`,aiFailureDetection:`Обнаружение сбоев с помощью ИИ`,aiFailureDetectionDescription:`Уведомить, если Obico AI обнаружит возможный сбой печати`,lowFilamentLabel:`Заканчивается филамент`,maintenanceDue:`Требуется обслуживание`,maintenanceDueDescription:`Уведомить, когда принтеру потребуется обслуживание`,amsHumidityHigh:`Высокая влажность в AMS`,amsHumidityHighDescription:`Влажность в обычной AMS превысила заданный порог`,amsTemperatureHigh:`Высокая температура в AMS`,amsTemperatureHighDescription:`Температура в обычной AMS превысила заданный порог`,amsDryingSuspendedTitle:`Автоматическая сушка приостановлена`,amsDryingSuspendedDescription:`Автоматическая сушка блока AMS прекращена: влажность так и не опустилась ниже порога`,amsHtHumidityHigh:`Высокая влажность в AMS-HT`,amsHtHumidityHighDescription:`Влажность в AMS-HT превысила заданный порог`,amsHtTemperatureHigh:`Высокая температура в AMS-HT`,amsHtTemperatureHighDescription:`Температура в AMS-HT превысила заданный порог`,inventoryAlerts:`Уведомления о запасах`,stockReorderAlert:`Пора заказывать`,stockReorderAlertDescription:`Запас по SKU достиг точки повторного заказа`,stockBreakAlert:`Риск исчерпания запаса`,stockBreakAlertDescription:`Запас закончится раньше, чем поступит пополнение`,jobAdded:`Задание добавлено`,jobAddedDescription:`Задание добавлено в очередь`,jobAssigned:`Задание назначено`,jobAssignedDescription:`Задание по модели назначено принтеру`,jobStarted:`Задание запущено`,jobStartedDescription:`Задание из очереди отправлено на печать`,jobWaiting:`Задание ожидает`,jobWaitingDescription:`Задание ожидает филамент или свободный принтер`,jobSkipped:`Задание пропущено`,jobSkippedDescription:`Задание пропущено из-за ошибки предыдущего`,jobFailed:`Не удалось запустить задание`,jobFailedDescription:`Задание не удалось отправить на печать`,queueComplete:`Очередь завершена`,queueCompleteDescription:`Все задания в очереди завершены`,quietHours:`Тихие часы`,noNotificationsDuring:`Не отправлять уведомления в это время`,editProviderToChangeQuietHours:`Измените провайдера, чтобы настроить тихие часы`,dailyDigest:`Ежедневная сводка`,batchNotifications:`Объединять уведомления в одну ежедневную сводку`,sendAt:`Отправлять в {{time}}`,editProviderToChangeDigestTime:`Измените провайдера, чтобы настроить время сводки`,edit:`Изменить`,deleteProvider:`Удалить провайдера уведомлений`,deleteConfirm:`Удалить «{{name}}»? Это действие нельзя отменить.`,delete:`Удалить`,addTitle:`Добавить провайдера уведомлений`,editTitle:`Изменить провайдера уведомлений`,nameLabel:`Название *`,namePlaceholder:`Мои уведомления`,providerTypeLabel:`Тип провайдера *`,configuration:`Настройка`,testConfiguration:`Проверить настройку`,printerFilter:`Фильтр принтеров`,onlyFromPrinter:`Отправлять уведомления только о событиях этого принтера`,quietHoursDnd:`Тихие часы (не беспокоить)`,quietStart:`Начало`,quietEnd:`Окончание`,dailyDigestLabel:`Ежедневная сводка`,sendDigestAt:`Отправлять сводку в`,digestCollected:`События будут собраны и отправлены одной сводкой в указанное время`,notificationEvents:`События для уведомлений`,progressPercent:`(25%, 50%, 75%)`,bedCooledAfterPrint:`(после завершения печати)`,haSensorAlert:`Оповещение датчика принтера`,haSensorAlertDescription:`(связанный датчик Home Assistant требует внимания)`,locationHaSensorAlert:`Оповещение датчика места хранения`,locationHaSensorAlertDescription:`(датчик Home Assistant, связанный с местом хранения, требует внимания)`,eventPriority:{sectionTitle:`Приоритет ntfy`,helpNtfy:`Выберите приоритет для каждого включённого события. ntfy использует его для усиления оповещений: звука, видимости и поведения push-уведомлений. Для неуказанных событий используется приоритет по умолчанию сервера ntfy.`,min:`Минимальный`,low:`Низкий`,default:`Обычный`,high:`Высокий`,urgent:`Срочный`},cancel:`Отмена`,save:`Сохранить`,add:`Добавить`,nameRequired:`Укажите название`,fieldRequired:`Поле «{{field}}» обязательно`,haDataInvalid:`Поле Data должно быть корректным JSON-объектом, напр. {"priority": "high", "ttl": 0}`,phoneNumber:`Номер телефона`,apiKey:`Ключ API`,serverUrl:`URL сервера`,topic:`Тема`,authToken:`Токен авторизации`,userKey:`Ключ пользователя`,appToken:`Токен приложения`,priority:`Приоритет`,pushoverRetry:`Повтор экстренного уведомления (с)`,pushoverExpire:`Срок действия экстренного уведомления (с)`,botToken:`Токен бота`,chatId:`ID чата`,telegramThreadId:`ID темы форума`,telegramThreadIdHelp:`Необязательно. Отправляет в конкретную тему форум-группы — последнее число в ссылке на тему (t.me/c/.../25). Оставьте пустым для темы General.`,telegramThreadIdInvalid:`ID темы форума должен быть числом.`,smtpServer:`SMTP-сервер`,smtpPort:`Порт SMTP`,security:`Защита соединения`,authentication:`Аутентификация`,username:`Имя пользователя`,password:`Пароль`,fromEmail:`Адрес отправителя`,toEmail:`Адрес получателя`,webhookUrl:`URL вебхука`,payloadFormat:`Формат данных`,authorization:`Авторизация`,titleFieldName:`Имя поля заголовка`,messageFieldName:`Имя поля сообщения`,editTemplate:`Изменить шаблон: {{name}}`,titleLabel:`Заголовок`,bodyLabel:`Текст`,titlePlaceholder:`Заголовок уведомления...`,bodyPlaceholder:`Текст уведомления...`,availableVariables:`Доступные переменные`,clickToInsert:`Нажмите, чтобы вставить в позицию курсора в тексте`,livePreview:`Предварительный просмотр`,hide:`Скрыть`,show:`Показать`,loadingPreview:`Загрузка предварительного просмотра...`,enterTemplateContent:`Введите содержимое шаблона для предварительного просмотра`,titlePreview:`Заголовок:`,bodyPreview:`Текст:`,resetToDefault:`Восстановить стандартный шаблон`,titleRequired:`Укажите заголовок`,bodyRequired:`Введите текст уведомления`,notificationLog:`Журнал уведомлений`,showFailedOnly:`Только неудачные`,last24Hours:`Последние 24 часа`,last7Days:`Последние 7 дней`,last30Days:`Последние 30 дней`,last90Days:`Последние 90 дней`,justNow:`Только что`,noFailedNotifications:`Неудачных уведомлений нет`,noNotificationsLogged:`В журнале пока нет уведомлений`,unknownProvider:`Неизвестный провайдер`,logTitle:`Заголовок`,logMessage:`Сообщение`,logError:`Ошибка`,logProvider:`Провайдер: {{type}}`,logTime:`Время: {{time}}`,refresh:`Обновить`,clearOld:`Удалить старые`,statsSummary:`За последние {{days}} дней:`,statsNotifications:`уведомлений`,statsSent:`отправлено: {{count}}`,statsFailed:`ошибок: {{count}}`,eventTypes:{print_start:`Печать началась`,print_complete:`Печать завершена`,print_failed:`Ошибка печати`,print_stopped:`Печать остановлена`,print_progress:`Ход печати`,printer_offline:`Принтер не в сети`,printer_error:`Ошибка принтера`,filament_low:`Заканчивается филамент`,maintenance_due:`Требуется обслуживание`,test:`Тест`},userEmail:{title:`Уведомления`,emailNotifications:`Уведомления по электронной почте`,emailNotificationsDesc:`Получать письма о собственных заданиях печати. Для отправки используются системные параметры SMTP из раздела расширенной аутентификации.`,sendingTo:`Уведомления будут отправляться на адрес`,noEmailWarning:`Для вашей учётной записи не указан адрес электронной почты. Обратитесь к администратору.`,printJobNotifications:`Уведомления о заданиях печати`,printJobNotificationsDesc:`Выберите события, при которых будут отправляться письма о запущенных вами заданиях.`,printJobStarts:`Запуск задания печати`,printJobStartsDesc:`Уведомлять о начале вашего задания печати.`,printJobFinishes:`Завершение задания печати`,printJobFinishesDesc:`Уведомлять об успешном завершении вашего задания печати.`,printErrors:`Ошибки печати`,printErrorsDesc:`Уведомлять, если задание завершилось ошибкой или при печати возникла проблема.`,printJobStops:`Остановка задания печати`,printJobStopsDesc:`Уведомлять об отмене или остановке вашего задания печати.`,saveSuccess:`Настройки уведомлений сохранены.`,saveError:`Не удалось сохранить настройки уведомлений.`}},richTextEditor:{bold:`Полужирный`,italic:`Курсив`,underline:`Подчёркивание`,bulletList:`Маркированный список`,numberedList:`Нумерованный список`,alignLeft:`По левому краю`,alignCenter:`По центру`,alignRight:`По правому краю`,addLink:`Добавить ссылку`,removeLink:`Удалить ссылку`},externalLinks:{title:`Ссылки на боковой панели`,sidebarLayout:`Боковая панель`,sidebarLayoutDescription:`Показывайте или скрывайте встроенные страницы, добавляйте внешние ссылки и перетаскивайте пункты, меняя порядок навигации.`,systemPages:`Страницы Bambuddy`,externalLinks:`Внешние ссылки`,visibleInSidebar:`Показывается на боковой панели`,hiddenFromSidebar:`Скрыто с боковой панели`,requiredInSidebar:`Обязательный пункт боковой панели`,hidePage:`Скрыть страницу`,showPage:`Показать страницу`,settingsCannotBeHidden:`Настройки нельзя скрыть`,noLinksConfigured:`Внешние ссылки не настроены`,deleteLink:`Удалить ссылку`,removeCustomIcon:`Удалить пользовательский значок`,openInNewTab:`Открывать в новой вкладке`,placeholders:{linkName:`Моя ссылка`}},keyboardShortcuts:{title:`Горячие клавиши`,navigation:`Навигация`,archivesSection:`Архив`,kProfilesSection:`K-профили`,generalSection:`Общие`,shortcuts:{goToPrinters:`Перейти к принтерам`,goToArchives:`Перейти в архив`,goToQueue:`Перейти к очереди`,goToStats:`Перейти к статистике`,goToProfiles:`Перейти к облачным профилям`,goToSettings:`Перейти к настройкам`,focusSearch:`Перейти в строку поиска`,openUploadModal:`Открыть окно загрузки`,clearSelection:`Снять выделение / убрать фокус с поля`,contextMenu:`Контекстное меню карточки`,refreshProfiles:`Обновить профили`,newProfile:`Новый профиль`,exitSelectionMode:`Выйти из режима выделения`,showHelp:`Показать эту справку`},footer:`Нажмите Esc или щёлкните снаружи, чтобы закрыть`},notificationLog:{title:`Журнал уведомлений`,events:{printStarted:`Печать началась`,printComplete:`Печать завершена`,printFailed:`Ошибка печати`,printStopped:`Печать остановлена`,progress:`Ход выполнения`,printerOffline:`Принтер не в сети`,printerError:`Ошибка принтера`,lowFilament:`Заканчивается филамент`,maintenanceDue:`Требуется обслуживание`,test:`Тест`},timeAgo:{justNow:`Только что`,minutesAgo:`{{minutes}} мин назад`,hoursAgo:`{{hours}} ч назад`}},restoreBackup:{title:`Восстановление резервной копии`,restoring:`Восстановление...`,restoreComplete:`Восстановление завершено`,restoreFailed:`Ошибка восстановления`,importSettings:`Импортировать настройки из файла резервной копии`,pleaseWait:`Подождите, пока данные восстанавливаются`,clickToSelect:`Нажмите, чтобы выбрать файл резервной копии (.json или .zip)`,howDuplicateHandling:`Как обрабатываются совпадения:`,categories:{printers:`Принтеры`,smartPlugs:`Умные розетки`,notificationProviders:`Провайдеры уведомлений`,filaments:`Филаменты`,archives:`Архив`,pendingUploads:`Ожидающие загрузки`,settingsTemplates:`Настройки и шаблоны`},matchingInfo:{printers:`сопоставляются по серийному номеру`,smartPlugs:`сопоставляются по IP-адресу`,notificationProviders:`сопоставляются по названию`,filaments:`сопоставляются по названию, типу и бренду`,archives:`сопоставляются по хешу содержимого`,pendingUploads:`сопоставляются по имени файла`,settingsTemplates:`всегда перезаписываются`},replaceExisting:`Заменить существующие данные`,keepExisting:`Сохранить существующие данные`,replaceDescription:`Перезаписать уже существующие элементы данными из резервной копии`,keepDescription:`Восстановить только отсутствующие элементы`,caution:`Внимание:`,cautionText:`При перезаписи текущая конфигурация будет заменена данными из резервной копии. В целях безопасности коды доступа к принтерам никогда не перезаписываются.`,itemsRestored:`Восстановлено элементов`,itemsSkipped:`Пропущено элементов`,restored:`Восстановлено`,skipped:`Пропущено (уже существует)`,filesLabel:`Файлы (3MF, миниатюры и т. п.)`,newApiKeysGenerated:`Созданы новые ключи API`,newApiKeysWarning:`Эти ключи показываются только один раз. Скопируйте их сейчас!`,processingBackup:`Обработка резервной копии...`,noDataFound:`В резервной копии не найдено данных для восстановления.`,failedToRestore:`Не удалось восстановить резервную копию. Проверьте формат файла.`},backupExport:{title:`Экспорт резервной копии`,selectData:`Выберите данные для включения`,selectAll:`Выбрать всё`,selectNone:`Снять выделение`,categoryDescriptions:{settings:`Язык, тема и настройки обновлений`,notifications:`ntfy, Pushover, Discord и другие`,templates:`Пользовательские шаблоны сообщений`,smartPlugs:`Конфигурация розеток Tasmota`,externalLinks:`Ссылки на внешние сервисы в боковой панели`,printers:`Сведения о принтерах (без кодов доступа)`,plateDetection:`Эталонные изображения пустых пластин`,filaments:`Типы и стоимость филамента`,maintenance:`Пользовательские графики обслуживания`,archives:`Все данные печати и файлы (3MF, миниатюры, фотографии)`,projects:`Проекты, позиции спецификаций и вложения`,pendingUploads:`Загрузки виртуальных принтеров, ожидающие проверки`,apiKeys:`Ключи API вебхуков (при импорте создаются новые)`},requiresPrinters:`Необходимо выбрать раздел «Принтеры»`,zipFileWarning:`Будет создан ZIP-файл.`,zipFileDescription:`В него войдут все файлы 3MF, миниатюры, таймлапсы и фотографии. Операция может занять некоторое время, а файл — получиться большим.`,includeAccessCodes:`Включить коды доступа`,includeAccessCodesDescription:`Для переноса на другой компьютер`,includeAccessCodesWarning:`Коды доступа попадут в файл открытым текстом. Храните резервную копию в безопасном месте!`,categoriesSelected:`Выбрано категорий: {{selectedCount}}`},pendingUploads:{placeholders:{notes:`Добавьте примечания об этой печати...`},discardUpload:`Отклонить загрузку`,archiveAllUploads:`Добавить все загрузки в архив`,discardAllUploads:`Отклонить все загрузки`,archive:`В архив`,timeAgo:{justNow:`Только что`,minutesAgo:`{{minutes}} мин назад`,hoursAgo:`{{hours}} ч назад`,daysAgo:`{{days}} дн. назад`}},apiBrowser:{placeholders:{requestBody:`Тело запроса JSON...`,searchEndpoints:`Поиск конечных точек...`}},configureAmsSlot:{title:`Настройка слота AMS`,slotConfigured:`Слот настроен!`,configuringSlot:`Настраивается слот:`,slotLabel:`{{ams}}, слот {{slot}}`,searchPresets:`Поиск профилей...`,colorPlaceholder:`Название или HEX-код цвета (например: brown, FF8800)`,clearCustomColor:`Очистить пользовательский цвет`,noCloudPresets:`Облачных профилей нет. Войдите в Bambu Cloud для синхронизации.`,noPresetsAvailable:`Нет доступных профилей. Войдите в Bambu Cloud или импортируйте локальные профили.`,noMatchingPresets:`Подходящие профили не найдены.`,custom:`Пользовательский`,builtin:`Встроенный`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Настройки отправлены на принтер`,filamentProfile:`Профиль филамента`,kProfileLabel:`K-профиль (Pressure Advance)`,filteringFor:`Фильтр по материалу: {{material}}`,noKProfile:`Без K-профиля (стандартное значение 0,020)`,noMatchingKProfiles:`Подходящие K-профили не найдены. Будет использовано стандартное значение K=0,020.`,otherKProfiles:`Другие K-профили на этом принтере`,selectFilamentFirst:`Сначала выберите профиль филамента`,kFromCalibration:`K={{value}} из калибровки принтера`,customColorLabel:`Пользовательский цвет (необязательно)`,presetColors:`Цвета {{name}}:`,showLessColors:`Показать меньше цветов`,showMoreColors:`Показать больше цветов`,clear:`Очистить`,hexLabel:`HEX: #{{hex}}`,resetting:`Сброс...`,resetSlot:`Сбросить слот`,cancel:`Отмена`,configuring:`Настройка...`,configureSlot:`Настроить слот`},githubBackup:{title:`Резервное копирование в Git`,history:`История`,downloadBackup:`Скачать резервную копию`,restoreBackup:`Восстановить резервную копию`,noBackupsYet:`Резервных копий пока нет`},emailSettings:{placeholders:{fromName:`BamBuddy`}},tagManagement:{searchTags:`Поиск меток...`,renameTag:`Переименовать метку`,deleteTag:`Удалить метку`},notificationTemplates:{placeholders:{title:`Заголовок уведомления...`,body:`Текст уведомления...`}},batchTag:{placeholders:{newTag:`Введите новую метку...`}},photoGallery:{deletePhoto:`Удалить фотографию`},filamentHoverCard:{copySpoolUuid:`Скопировать UUID катушки`},kProfilesView:{hasNote:`Есть примечание`,copyProfile:`Копировать профиль`},layout:{openMenu:`Открыть меню`,noPermissionSystemInfo:`У вас нет разрешения на просмотр системной информации`},dashboard:{dragToReorder:`Перетащите, чтобы изменить порядок`,hideWidget:`Скрыть виджет`},notificationProviderCard:{deleteNotificationProvider:`Удалить провайдера уведомлений`},fileManagerModal:{closeFileManager:`Закрыть файловый менеджер`,sortFiles:`Сортировать файлы`,goToParentFolder:`Перейти в родительскую папку`,threeView:`Просмотр 3D`},embeddedCameraViewer:{refreshStream:`Обновить поток`,close:`Закрыть`,zoomOut:`Уменьшить`,resetZoom:`Сбросить масштаб`,zoomIn:`Увеличить`,dragToResize:`Перетащите, чтобы изменить размер`},timelapseViewer:{skipBack5s:`Назад на 5 с`,skipForward5s:`Вперёд на 5 с`},notificationProviders:{descriptions:{email:`Уведомления по электронной почте через SMTP`,telegram:`Уведомления через Telegram-бота`,discord:`Отправка в канал Discord через вебхук`,ntfy:`Бесплатные push-уведомления с возможностью самостоятельного размещения сервера`,pushover:`Простые и надёжные push-уведомления`,callmebot:`Бесплатные уведомления WhatsApp через CallMeBot`,webhook:`Обычный HTTP POST на любой URL`}},logViewer:{searchPlaceholder:`Поиск по сообщению или имени логгера...`,noLogEntries:`Записи журнала не найдены`},switchbarPopover:{noSwitchesInSwitchbar:`На панели переключателей нет устройств`},projectPageModal:{placeholders:{title:`Название`,designer:`Автор`,license:`Лицензия`,description:`Введите описание...`,profileTitle:`Название профиля`,profileDescription:`Описание профиля...`}},spoolmanSettings:{},time:{unknown:`—`,waiting:`Ожидание`,justNow:`Только что`,now:`Сейчас`,minsAgo:`{{count}} мин назад`,inMins:`через {{count}} мин`,hoursAgo:`{{count}} ч назад`,inHours:`через {{count}} ч`,daysAgo:`{{count}} дн. назад`,inDays:`через {{count}} дн.`},spoolbuddy:{nav:{dashboard:`Панель`,ams:`AMS`,inventory:`Катушки`,writeTag:`Запись метки`,settings:`Настройки`},status:{nfcReady:`NFC готов`,nfcOff:`NFC выключен`,offline:`Не в сети`,online:`В сети`,noPrinters:`Нет принтеров`,deviceOffline:`Устройство не в сети`,waitingConnection:`Ожидание подключения устройства...`,systemReady:`Система готова`,status:`Состояние`},dashboard:{readyToScan:`Готово к сканированию`,idleMessage:`Поставьте катушку на весы для идентификации`,nfcHint:`Метка NFC будет считана автоматически`,device:`Устройство`,syncWeight:`Синхронизировать массу`,weightSynced:`Синхронизировано!`,unknownTag:`Неизвестная метка`,newTag:`Обнаружена новая метка`,onScale:`на весах`,linkSpool:`Связать с катушкой`,linkTagTitle:`Связать метку с катушкой`,linkTag:`Связать метку`,selectSpool:`Выберите катушку, с которой нужно связать эту метку:`,noUntagged:`Катушки без меток не найдены`,tagDetected:`Метка обнаружена`,noTag:`Метка отсутствует`,tagId:`Метка`,grossWeight:`Масса брутто`,spoolSize:`Размер катушки`,close:`Закрыть`,currentSpool:`Текущая катушка`,plateReady:`Пластина готова: {{name}}`,plateReadyLabel:`Пластины, готовые к очистке`,plateClearAction:`Очищено`,plateClearedToast:`Пластина отмечена как очищенная`,plateClearFailed:`Не удалось отметить пластину как очищенную`},modal:{spoolDetected:`Катушка обнаружена`,assignToAms:`Назначить в AMS`,syncWeight:`Синхронизировать массу`,weightSynced:`Синхронизировано!`,syncing:`Синхронизация...`,newTagDetected:`Обнаружена новая метка`,addToInventory:`Добавить в учёт`,assignToAmsTitle:`Назначить в AMS`,selectSlot:`Выберите слот`,assign:`Назначить`,assigning:`Назначение...`,assignSuccess:`Назначено!`,assignPendingInsert:`Назначено. Слот будет настроен после установки катушки.`,assignError:`Не удалось назначить катушку. Повторите попытку.`,noPrinterSelected:`Выберите принтер...`,noAmsDetected:`На этом принтере AMS не обнаружена`,slot:`Слот`},weight:{noReading:`Нет показаний`,stable:`Стабильно`,measuring:`Измерение...`,tare:`Тарировать`,calibrate:`Калибровать`},spool:{remaining:`Остаток`,material:`Материал`,brand:`Бренд`,color:`Цвет`,coreWeight:`Сердечник`,labelWeight:`По этикетке`,scaleWeight:`По весам`,netWeight:`Нетто`,lastUsed:`Последнее использование`,unknownColor:`Неизвестный цвет`},ams:{noData:`AMS не обнаружена`,connectAms:`Подключите AMS, чтобы увидеть слоты филамента`,noPrinter:`Принтер не выбран`,selectPrinter:`Выберите принтер на верхней панели`,printerDisconnected:`Принтер отключён`,humidity:`Влажность`,level:`Уровень`,active:`Активен`,slot:`Слот`,empty:`Пусто`},inventory:{search:`Поиск катушек...`,empty:`В учёте нет катушек`,noResults:`Подходящие катушки не найдены`,spools:`катушек`,addSpool:`Добавить катушку`},settings:{tabDevice:`Устройство`,tabDisplay:`Экран`,tabScale:`Весы`,tabUpdates:`Обновления`,nfcReader:`Считыватель NFC`,type:`Тип`,connection:`Подключение`,notConnected:`Н/Д`,deviceInfo:`Сведения об устройстве`,hostname:`Хост`,uptime:`Время работы`,systemConfig:`Бэкенд и авторизация`,backendUrl:`URL бэкенда Bambuddy`,apiToken:`Токен API`,apiTokenPlaceholder:`Введите токен API`,saveConfig:`Сохранить конфигурацию`,systemQueued:`Конфигурация поставлена в очередь.`,nfcDiagnostic:`Диагностика NFC`,scaleDiagnostic:`Диагностика весов`,readTagDiagnostic:`Диагностика чтения метки`,testNfc:`Проверить считыватель`,testScale:`Проверить точность`,testReadTag:`Считать метку`,systemFieldsRequired:`Необходимо указать URL бэкенда.`,brightness:`Яркость`,saved:`Сохранено`,noBacklight:`Подсветка DSI не обнаружена. Для управления яркостью требуется дисплей DSI.`,screenBlank:`Тайм-аут отключения экрана`,screenBlankDesc:`Экран выключается при бездействии. Коснитесь его для пробуждения.`,displayNote:`Яркость регулируется программным фильтром.`,scaleCalibration:`Калибровка весов`,currentWeight:`Текущая масса`,tareOffset:`Тара`,calFactor:`Коэффициент`,knownWeight:`Эталонная масса`,calStep1:`Уберите всё с весов и нажмите «Установить ноль».`,calStep2:`Положите на весы груз известной массы.`,setZero:`Установить ноль`,calibrateNow:`Калибровать`,calibrated:`Откалибровано`,tareSet:`Команда тарирования отправлена. Ожидание устройства...`,tareComplete:`Тарирование завершено!`,tareTimedOut:`Истекло время ожидания тарирования — демон SpoolBuddy запущен?`,tareFailed:`Не удалось отправить команду тарирования`,zeroSet:`Нулевая точка установлена. Положите на весы груз известной массы.`,calibrationDone:`Калибровка завершена!`,calibrationFailed:`Ошибка калибровки`,lastCalibrated:`Последняя калибровка`,stable:`Стабильно`,settling:`Стабилизация...`,firmware:`Прошивка`,scale:`Весы`,noDevice:`Устройство SpoolBuddy не найдено`,daemonVersion:`Версия демона`,currentVersion:`Текущая`,versionPending:`Ожидание демона...`,checking:`Проверка...`,checkUpdates:`Проверить обновления`,updateAvailable:`Доступно обновление`,updateInstructions:`Обновление по SSH: запустите установочный скрипт SpoolBuddy.`,upToDate:`Установлена актуальная версия`,includeBeta:`Включать бета-версии`},writeTag:{tabExisting:`Существующая катушка`,tabNew:`Новая катушка`,tabReplace:`Заменить метку`,searchPlaceholder:`Поиск по материалу, цвету или бренду...`,noUntaggedSpools:`Нет катушек без меток`,noTaggedSpools:`Нет катушек с метками`,selectSpool:`Выберите катушку, затем положите чистую метку NTAG на считыватель`,placeTag:`Положите метку NTAG на считыватель`,tagReady:`Метка обнаружена — можно записывать`,writeTag:`Записать метку`,replaceTag:`Заменить метку`,writing:`Запись метки...`,waiting:`Ожидание SpoolBuddy...`,writeSuccess:`Метка успешно записана!`,writeFailed:`Ошибка записи`,queueFailed:`Не удалось поставить команду записи в очередь`,tryAgain:`Повторить`,cancel:`Отмена`,replaceWarning:`Старая метка будет отвязана и заменена новой.`,deviceOffline:`SpoolBuddy не в сети`,material:`Материал`,colorName:`Название цвета`,color:`Цвет`,brand:`Бренд`,weight:`Масса (г)`,createSpool:`Создать катушку`,creating:`Создание...`,spoolCreated:`Катушка создана! Можно записывать метку.`,createFailed:`Не удалось создать катушку`,incompleteDataWarning:`Метка записана с неполными данными Spoolman`},quickMenu:{printerPower:`Питание принтера`,systemControls:`Система`,restartDaemon:`Перезапустить демон`,restartBrowser:`Перезапустить браузер`,reboot:`Перезагрузить`,shutdown:`Выключить`,swipeToClose:`Проведите вниз, чтобы закрыть`,confirmTitle:`Подтверждение`,confirmShutdown:`Выключить SpoolBuddy? Для повторного включения потребуется физический доступ.`,confirmReboot:`Перезагрузить SpoolBuddy?`,confirmRestartDaemon:`Перезапустить демон SpoolBuddy? NFC и весы временно будут недоступны.`,confirmRestartBrowser:`Перезапустить браузер киоска? Экран ненадолго погаснет.`,confirm:`Подтвердить`,confirmPlugOn:`Включить {{name}}?`,confirmPlugOff:`Выключить {{name}}?`,turnOn:`Включить`,turnOff:`Выключить`}},diagnostic:{modalTitle:`Диагностика подключения — {{name}}`,running:`Выполняется диагностика...`,runningElapsed:`Выполняется диагностика... ({{elapsed}} с)`,waitingForReportHint:`Ожидание публикации отчёта о состоянии принтера — это может занять до {{max}} секунд.`,runFailed:`Не удалось выполнить диагностику: {{error}}`,retry:`Запустить снова`,runButton:`Запустить диагностику`,sectionTitle:`Диагностика подключения`,sectionDescription:`Проверьте, почему принтер не подключается или не печатает: доступность портов, режим разработчика LAN, сетевой режим Docker и учётные данные.`,noPrinters:`Принтеры не настроены.`,overall:{ok:`Проблем не обнаружено — подключение к принтеру исправно.`,warnings:`Принтер должен работать, но некоторые пункты требуют внимания.`,problems:`Обнаружены проблемы, объясняющие, почему принтер не подключается или не печатает.`},check:{port_mqtt:{title:`Порт управления (MQTT 8883)`,pass:`Доступен — принтер принимает управляющие подключения.`,fail:`Порт 8883 недоступен. Принтер выключен, имеет другой IP-адрес либо подключение блокирует межсетевой экран. Проверьте IP-адрес принтера и доступность порта 8883.`},port_ftps:{title:`Порт передачи файлов (FTPS 990)`,pass:`Доступен — отправка файлов печати будет работать.`,warn:`Порт 990 недоступен. Мониторинг может работать, но отправка заданий на принтер завершится ошибкой. Убедитесь, что порт 990 не заблокирован.`,warn_no_tls:`Порт 990 открыт, но файловая служба принтера не завершает рукопожатие TLS. Файлы печати, обложки и таймлапсы получить невозможно, поэтому архивы остаются пустыми. Перезагрузите принтер — разблокировка порта не поможет.`},external_storage:{title:`Сохранять отправленные файлы во внешнем хранилище (шаг 4 установки)`,pass:`Принтер сообщает, что параметр включён: отправленные файлы будут сохраняться на SD-карте, а в архиве появятся миниатюры и метаданные слайсера.`,fail:`Принтер сообщает, что параметр выключен. Включите «Сохранять отправленные файлы во внешнем хранилище»: в новых прошивках (P2S 01.02 / Bambu Studio 2.6+) переключатель находится в настройках печати принтера, в старых — на вкладке «Устройство» Bambu Studio / OrcaSlicer. Без этого у всех архивных заданий не будет миниатюр и метаданных слайсера.`,skip:`Не проверено — требуется активное подключение MQTT. В старых версиях слайсеров этот параметр существует только в слайсере и принтер его не сообщает, поэтому проверка может пройти даже при выключенном параметре. Проверьте шаг 4 установки вручную.`,skip_unsupported_model:`В этой модели есть слот SD-карты, но включить соответствующую функцию невозможно: текущая прошивка серии P1 не предоставляет переключатель в Bambu Studio, а у принтера нет экрана. Исправлять здесь нечего. Пока Bambu Lab не добавит поддержку в прошивку, архивные задания могут сохраняться без миниатюр и метаданных слайсера.`,fail_no_media:`Параметр включён, но принтер не видит ни карты, ни флешки в слоте, поэтому отправленным файлам некуда деваться. Вставьте накопитель и напечатайте снова — до тех пор у каждой архивной печати не будет ни миниатюры, ни метаданных слайсера.`,warn_internal_storage:`Параметр включён и накопитель на месте, но последняя печать всё равно ушла во внутреннюю память принтера, которую Bambuddy не может прочитать. На серии H2, P2S и X2D кнопка «Печать» в Bambu Studio всегда отправляет туда, независимо от этого параметра. Печати архивируются с именем и временем, но без миниатюры и метаданных слайсера. Чтобы архивы были полными, запускайте печать из Bambuddy, нарезайте в OrcaSlicer или в Bambu Studio используйте «Отправить» с «Внешним накопителем», а затем запускайте печать.`,warn_internal_history:`Опция включена и накопитель на месте, но последняя печать шла из файла, который уже был на принтере, — повторная печать с его экрана, запуск из Handy или файл, отправленный раньше. Эта библиотека лежит во внутренней памяти, которую Bambuddy не читает, и никакие настройки этого не меняют: для той печати ничего не отправлялось. Она по-прежнему архивируется с именем и временем, но без миниатюры и метаданных слайсера. Чтобы архивы были полными, запускайте печать из Bambuddy или отправляйте её из слайсера.`},port_rtsps:{title:`Порт камеры ({{protocol}} {{port}})`,pass:`Доступен — видеопоток камеры будет работать.`,warn:`Порт {{port}} недоступен. Просмотр камеры в реальном времени работать не будет. На печать это не влияет.`},macos_local_network:{title:`Разрешение macOS на доступ к локальной сети`,pass:`macOS разрешает Bambuddy доступ к локальной сети.`,warn_unsigned:`У Python, под которым работает Bambuddy, нет подписи кода, поэтому macOS не к чему привязать разрешение на доступ к локальной сети и молча отбрасывает все подключения к принтеру — без ошибки и без запроса. Запустите сценарий обновления Bambuddy (install/update_macos.sh), который подписывает его, и перезапустите Bambuddy. Интерпретатор: {{executable}}`,warn_permission:`Если принтер включён и доступен по этому адресу, откройте Настройки системы > Конфиденциальность и безопасность > Локальная сеть и убедитесь, что Python, под которым работает Bambuddy, включён. Иначе macOS молча отбрасывает локальные подключения, а обновление Python может оставить старое разрешение позади.`},network_mode:{title:`Сетевой режим контейнера`,genericRuntime:`контейнере`,pass:`Работает в {{runtime}} с сетью host.`,warn:`Bambuddy работает в {{runtime}} с сетью bridge. Для обнаружения принтеров и виртуального принтера требуется сеть host — пересоздайте контейнер с сетью host («network_mode: host» в docker-compose, «--network=host» для Podman).`,skip:`Bambuddy запущен не в контейнере — проверка неприменима.`,skip_unknown:`Bambuddy работает в {{runtime}}, но определить сетевой режим не удалось. Если обнаружение принтеров или виртуальный принтер не работают, пересоздайте контейнер с сетью host.`,skip_system_container:`Bambuddy работает в системном контейнере {{runtime}}, который находится в локальной сети как виртуальная машина — проверка неприменима.`},subnet:{title:`Подсеть`,pass:`Принтер и Bambuddy находятся в одной подсети.`,warn:`Принтер ({{printer_ip}}) и Bambuddy ({{host_ip}}) находятся в разных подсетях. Без настроенной маршрутизации между подсетями они могут быть недоступны друг для друга.`,skip:`Не удалось определить подсеть — проверка пропущена.`},mqtt_auth:{title:`Учётные данные принтера`,pass:`Принтер принял подключение.`,fail:`Принтер доступен, но Bambuddy к нему не подключён. Скорее всего, неверны код доступа или серийный номер — код доступа изменяется при каждом переключении режима «Только LAN» или режима разработчика, поэтому снова скопируйте его с экрана принтера. Так же выглядит принтер, который перезагружается или уже исчерпал лимит одновременных подключений.`,fail_auth_rejected:`Принтер отклонил учётные данные Bambuddy. Код доступа или серийный номер неверны — код доступа изменяется при каждом переключении режима «Только LAN» или режима разработчика. Снова скопируйте его с экрана принтера и сохраните в настройках принтера.`,skip:`Не проверено — принтер недоступен.`},developer_mode:{title:`Режим разработчика LAN`,pass:`Режим разработчика включён.`,fail:`Режим разработчика на принтере ВЫКЛЮЧЕН. Включите его в настройках LAN принтера и подтвердите кнопкой OK. Без него задания печати не запускаются.`,skip:`Не удалось проверить — требуется активное подключение к принтеру.`},printer_publishing:{title:`Принтер публикует состояние`,pass:`Принтер публикует обновления состояния — AMS, филаменты и K-профили будут корректно передаваться в слайсер.`,fail:`MQTT-брокер принял подключение, но принтер не опубликовал ни одного отчёта о состоянии. Почти всегда причина в неверном регистре или ошибке в серийном номере: тема device/<serial>/report чувствительна к регистру. Сверьте серийный номер в настройках принтера с номером на его экране.`,skip:`Не удалось проверить — требуется активное подключение к принтеру.`}}},systemHealth:{sectionTitle:`Состояние системы`,sectionDescription:`Проверяет последние журналы на известные проблемы, которые обычно можно исправить самостоятельно до обращения в поддержку.`,rescan:`Проверить снова`,clean:`В последних {{times}} записях журнала известные проблемы не найдены.`,logUnavailable:`Запись журналов в файл отключена, поэтому выполнить проверку невозможно. Включите файловое журналирование.`,learnMore:`Как исправить`,fixLabel:`Исправление:`,occurrences:`Обнаружено {{times}} раз; последний раз — {{lastSeen}}`,category:{layer8:`Можно исправить самостоятельно`,environment:`Окружение`,bug:`Сообщите об ошибке`},signature:{"ftp-auth-rejected":{name:`Принтер отклонил код доступа`,cause:`Принтер отклонил вход в службу передачи файлов. Код доступа неверен либо изменился после переключения режима разработчика.`,fix:`Снова скопируйте код доступа с экрана принтера в настройках LAN и обновите его в настройках принтера Bambuddy.`},"ftp-connection-timeout":{name:`Истекло время подключения к службе передачи файлов`,cause:`Bambuddy не смог подключиться к порту передачи файлов принтера (FTPS 990). Порт заблокирован, принтер выключен либо находится в другой подсети.`,fix:`Убедитесь, что порт 990 между Bambuddy и принтером не блокируется и оба устройства находятся в доступных друг другу сетях.`},"ftp-ssl-error":{name:`Ошибка защищённого соединения с файловой службой`,cause:`Файловая служба принтера ответила на порту 990 без TLS. Её файловый сервер завис — это неисправность самого принтера, а не межсетевого экрана или прошивки.`,fix:`Перезапустите принтер. До этого файлы печати, обложки и таймлапсы получить нельзя, но на саму печать это не влияет.`},"bambu-cloud-captcha":{name:`Bambu Cloud требует пройти CAPTCHA`,cause:`Защита Bambu от злоупотреблений проверяет эту сеть, поэтому вход в Bambu Cloud завершить невозможно. Это связано с публичным IP-адресом, а не с вашей учётной записью или этой установкой.`,fix:`Подождите: обычно проверка снимается за несколько часов, а повторные попытки входа её продлевают. Пока что войдите с помощью токена доступа из сессии браузера.`},"mqtt-connection-flapping":{name:`Подключение к принтеру постоянно обрывается`,cause:`Управляющее соединение MQTT 8883 постоянно разрывается и восстанавливается. Обычно причина в нестабильной сети или частично заблокированном порте.`,fix:`Проверьте уровень Wi‑Fi у принтера, по возможности используйте проводное подключение и убедитесь в стабильной доступности порта 8883.`},"camera-connection-refused":{name:`Видеопоток камеры недоступен`,cause:`Камера недоступна по порту RTSPS 322. Порт заблокирован либо на принтере выключены камера или просмотр по LAN.`,fix:`Включите камеру и просмотр по LAN на принтере и убедитесь, что порт 322 не заблокирован. На печать это не влияет.`},"database-locked":{name:`Конфликт записи в базу данных`,cause:`Под нагрузкой SQLite выдаёт ошибки «database is locked». Это часто происходит при одновременной работе с несколькими принтерами.`,fix:`Переведите Bambuddy на внешнюю базу PostgreSQL. См. руководство по PostgreSQL в документации.`}}},vpDiagnostic:{title:`Проверка настройки — {{name}}`,runButton:`Запустить проверку`,running:`Выполняется проверка настройки...`,runFailed:`Не удалось выполнить проверку: {{error}}`,retry:`Запустить снова`,overall:{ok:`Все проверки пройдены — виртуальный принтер настроен правильно.`,warnings:`Виртуальный принтер должен работать, но некоторые пункты требуют внимания.`,problems:`Обнаружены проблемы, из-за которых слайсер не видит или не может использовать виртуальный принтер.`},check:{enabled:{title:`Виртуальный принтер включён`,fail:`Виртуальный принтер выключен. Включите его, чтобы он обнаруживался в сети.`},running:{title:`Службы запущены`,fail:`Виртуальный принтер включён, но его службы не работают. Проверьте журнал Bambuddy: обычно запуску мешает конфликт IP-адреса привязки или ошибка прав доступа.`},bind_interface:{title:`Сетевой интерфейс привязки`,fail:`Интерфейс привязки не задан или больше не существует на этом хосте. Выберите актуальный интерфейс в списке «Интерфейс привязки».`},access_code:{title:`Код доступа задан`,fail:`Код доступа не задан. В слайсере необходимо указать тот же восьмизначный код, который задан здесь.`},target_printer:{title:`Целевой принтер`,fail:`Целевой принтер не выбран. Для режима прокси необходимо указать реальный принтер.`,warn:`Целевой принтер сейчас не в сети. Перенаправление возобновится после его подключения.`},port_ftps:{title:`Служба загрузки файлов (порт {{port}})`,fail:`На порту {{port}} выбранного IP-адреса никто не слушает, поэтому слайсер не сможет загружать файлы. Обычно причина в конфликте порта на этом интерфейсе.`},port_mqtt:{title:`Служба управления (порт {{port}})`,fail:`На порту {{port}} выбранного IP-адреса никто не слушает, поэтому слайсер не сможет подключиться и отображать состояние.`},port_bind:{title:`Служба обнаружения (порт {{port}})`,fail:`На порту {{port}} выбранного IP-адреса никто не слушает, поэтому сетевое обнаружение слайсером не работает.`},privileged_ports:{title:`Привязка к привилегированным портам`,fail:`Порт {{port}} ниже 1024, и этой службе не разрешено его занимать — поэтому выше ничего не слушает. Добавьте AmbientCapabilities=CAP_NET_BIND_SERVICE в /etc/systemd/system/bambuddy.service и перезапустите либо выполните "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))". В Docker добавьте cap_add: [NET_BIND_SERVICE].`},certificate:{title:`Сертификат TLS`,pass:`Сертификат готов. Убедитесь, что сертификат центра сертификации Bambuddy, указанный выше, импортирован в доверенное хранилище слайсера.`,fail:`Сертификат TLS для этого виртуального принтера отсутствует. Проверьте права записи в каталог данных Bambuddy.`}}},bugReport:{title:`Сообщить об ошибке`,description:`Описание`,descriptionPlaceholder:`Что пошло не так? Опишите проблему...`,email:`Электронная почта (необязательно)`,emailPlaceholder:`your@email.com`,emailPrivacy:`Указанный адрес будет добавлен в сворачиваемый раздел задачи GitHub, чтобы сопровождающий мог с вами связаться.`,screenshot:`Снимок экрана`,uploadOrPaste:`Загрузите, вставьте или перетащите изображение`,dataCollectedSummary:`Какие данные включаются в отчёт?`,dataIncluded:`Включаются:`,dataIncludedList:`Версия приложения, ОС, архитектура, версия Python, статистика базы данных (только количества), модели принтеров, количество сопел, версии прошивок, состояние подключений, состояние интеграций (Spoolman, MQTT, HA), неконфиденциальные настройки, количество сетевых интерфейсов, сведения о Docker и версии зависимостей.`,dataNeverIncluded:`Никогда не включаются:`,dataNeverIncludedList:`Имена принтеров, серийные номера, коды доступа, пароли, IP-адреса, адреса электронной почты, ключи API, токены, URL вебхуков, имена хостов и пользователей.`,submit:`Отправить`,startLogging:`Начать отладочную запись`,stepEnableLogging:`Отладочная запись включена`,stepReproduce:`Теперь воспроизведите проблему`,stepStopLogging:`Остановить и отправить отчёт`,stopAndSubmit:`Остановить и отправить`,maxDuration:`Автоматическая остановка через {{minutes}} мин`,stoppingLogs:`Сбор журналов и отправка...`,submitting:`Отправка отчёта об ошибке...`,submittingStepConnection:`Проверка подключений к принтерам`,submittingStepVirtualPrinters:`Проверка настройки виртуальных принтеров`,submittingStepLogScan:`Поиск известных проблем в последних журналах`,submittingStepSubmit:`Отправка отчёта в GitHub`,submitSuccess:`Отчёт об ошибке успешно отправлен!`,submitFailed:`Не удалось отправить отчёт об ошибке`,diagnosticChecking:`Проверка подключений к принтерам...`,diagnosticHealthy:`Проверка подключения пройдена — проблем с принтерами не обнаружено.`,diagnosticSummary:`Проблемы с подключением обнаружены у {{problems}} из {{total}} принтеров`,diagnosticIntro:`У одного или нескольких принтеров есть проблема подключения, которая может быть причиной сбоя. Разверните сведения о принтере ниже и посмотрите способ исправления — возможно, отчёт об ошибке не потребуется. При необходимости его всё равно можно отправить ниже.`,logHealthSummary:`В журналах найдены известные проблемы`,logHealthIntro:`Последние записи журнала совпадают с известными проблемами. Посмотрите способы исправления ниже — возможно, отчёт об ошибке не потребуется. При необходимости его всё равно можно отправить.`,thankYou:`Спасибо!`,submitted:`Отчёт об ошибке отправлен.`,viewIssue:`Открыть задачу`,closeKeepsRecording:`Вы можете закрыть эту панель, пока воспроизводите проблему: запись продолжается, и при повторном открытии вы вернётесь сюда.`,resumeRecording:`Идёт запись отчёта об ошибке — {{elapsed}}. Нажмите, чтобы завершить.`,resumeReport:`Продолжить отчёт`,unexpectedError:`Произошла непредвиденная ошибка`},failureDetection:{title:`Обнаружение сбоев с помощью ИИ`,description:`Контролируйте печать через собственный сервер Obico ML API и автоматически реагируйте на обнаруженные сбои.`,mlUrl:`URL Obico ML API`,mlUrlHint:`Базовый URL собственного контейнера Obico ml_api, например http://192.168.1.10:3333.`,mlToken:`Токен ML API (необязательно)`,mlTokenPlaceholder:`Оставьте пустым, если сервер работает без ML_API_TOKEN`,mlTokenHint:`Должен совпадать с переменной окружения ML_API_TOKEN вашего контейнера Obico ml_api. Оставьте пустым, если контейнер работает без токена.`,test:`Проверить`,testSuccess:`ML API доступен и работает.`,testSuccessTokenUnknown:`ML API доступен и работает. Проверить токен не удалось.`,testFailed:`Не удалось подключиться к ML API.`,sensitivity:`Чувствительность`,sensitivityLow:`Низкая (меньше ложных срабатываний)`,sensitivityMedium:`Средняя (сбалансированная)`,sensitivityHigh:`Высокая (раннее обнаружение, больше ложных срабатываний)`,sensitivityHint:`Определяет пороги уверенности, при которых создаются предупреждения и фиксируются сбои.`,action:`Действие при обнаружении сбоя`,actionNotify:`Только уведомить`,actionPause:`Приостановить печать`,actionPauseOff:`Приостановить печать и отключить питание`,pollInterval:`Интервал проверки (секунды)`,pollIntervalHint:`Как часто проверять каждый принтер во время печати. Минимум 5 с, максимум 120 с.`,externalUrlMissing:`Внешний URL не задан.`,externalUrlHint:`ML API получает снимок камеры по URL. Укажите внешний URL в общих настройках, чтобы контейнер ML API мог обращаться к Bambuddy.`,perPrinterTitle:`Контролируемые принтеры`,perPrinterHint:`Выберите принтеры, за которыми будет следить служба обнаружения.`,monitorAll:`Контролировать все подключённые принтеры`,statusTitle:`Состояние`,serviceRunning:`Служба работает`,thresholds:`Низкий / высокий порог`,activePrinters:`Активные задания`,noActivePrints:`Сейчас ничего не печатается.`,historyTitle:`Последние обнаружения`,noHistory:`Обнаружений пока нет.`},makerworld:{title:`MakerWorld`,description:`Вставьте URL модели MakerWorld, чтобы импортировать и напечатать её прямо из Bambuddy — без перехода в приложение Bambu Handy.`,pasteUrlHeader:`Импорт из MakerWorld`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… или любая ссылка MakerWorld`,resolveButton:`Получить данные`,signInRequiredTitle:`Для загрузки требуется вход в Bambu Cloud`,signInRequiredBody:`Просматривать сведения о модели можно анонимно, но для загрузки файлов 3MF MakerWorld требует учётную запись Bambu Cloud.`,signInExpiredTitle:`Срок авторизации в Bambu Cloud истёк`,signInExpiredBody:`Вы по-прежнему авторизованы в Bambuddy, но Bambu Lab перестал принимать сохранённый токен, поэтому загрузки завершатся ошибкой. Выполните вход в Bambu Cloud снова.`,openCloudSettings:`Открыть настройки облака`,untitledModel:`Модель без названия`,byCreator:`Автор: {{name}}`,downloadsCount:`Загрузок: {{count}}`,licensePrefix:`Лицензия`,alreadyImported:`Уже в библиотеке`,openOnMakerworld:`Открыть на MakerWorld`,alreadyInLibrary:`Эта модель уже есть в библиотеке — найдите её в разделе «Файлы → MakerWorld».`,importSuccess:`Импортирован файл {{filename}} — сохранён в «Файлы → MakerWorld».`,platesHeader:`Пластины ({{count}})`,plateDefaultName:`Пластина {{n}}`,materialCount:`Филаментов: {{count}}`,amsRequired:`Требуется AMS`,slicedFor:`Нарезано для {{printer}}`,alsoCompatible:`Также отмечено как совместимое: {{printers}}`,importToLibrary:`Сохранить`,sliceIn:`Сохранить и нарезать в {{slicer}}`,disclaimer:`Интеграция с MakerWorld использует документированные сообществом конечные точки API. Bambuddy не связан с MakerWorld или Bambu Lab и не одобрен ими.`,lastImportSuccess:`Импортировано в библиотеку`,lastImportAlreadyInLibrary:`Уже в библиотеке`,viewInLibrary:`Открыть в файловом менеджере`,openInBambuStudio:`Открыть в Bambu Studio`,openInOrcaSlicer:`Открыть в OrcaSlicer`,importTo:`Импортировать в файловый менеджер`,recentImportsHeader:`Недавние импорты`,phaseResolving:`Получение данных`,phaseDownloading:`Загрузка`,folderAuto:`MakerWorld (по умолчанию)`,importAll:`Импортировать всё`,importAllProgress:`Импорт {{current}} из {{total}}`,openGallery:`Открыть галерею изображений`,galleryPrev:`Предыдущее изображение`,galleryNext:`Следующее изображение`,deleteImport:`Удалить из библиотеки`,importDeleting:`Удаление…`,importDeleted:`Удалено из библиотеки`,confirmDelete:`Удалить {{filename}} из библиотеки? Локальный файл будет удалён, но пластину можно снова импортировать из MakerWorld.`,errors:{resolveFailed:`Не удалось обработать эту ссылку MakerWorld.`,downloadFailed:`Ошибка загрузки. Повторите попытку.`,deleteFailed:`Не удалось удалить файл из библиотеки.`}},gcodeViewer:{filamentSlot:`Филамент {{n}}`,loading:`Чтение траектории…`,loadFailed:`Не удалось загрузить G-код этого файла.`,showTravel:`Холостые перемещения`,topLayer:`Верхний слой`,bottomLayer:`Нижний слой`,noSource:`Файл для предпросмотра не указан.`,view:{filament:`Филамент`,feature:`Тип`,height:`Высота`,width:`Ширина`},feature:{wall:`Стенки`,sparseInfill:`Разреженное заполнение`,solidInfill:`Сплошное заполнение`,bridge:`Мост / нависание`,support:`Поддержка`,skirt:`Юбка / кайма`,gapFill:`Заполнение зазоров`,ironing:`Разглаживание`,primeTower:`Башня очистки`},back:`Назад`,backToArchives:`Вернуться в архив печати`,backToFiles:`Вернуться в файловый менеджер`,plates:`Пластины`,plateN:`Пластина {{n}}`},libraryTrash:{title:`Корзина`,headerButton:`Корзина`,headerTooltip:`Просмотреть файлы, перемещённые в корзину`,backToFiles:`Вернуться к файлам`,subtitleAdmin:`Удалённые файлы хранятся здесь {{days}} дней, затем удаляются автоматически. Показаны файлы всех пользователей.`,subtitleUser:`Удалённые файлы хранятся здесь {{days}} дней, затем удаляются автоматически.`,loading:`Загрузка корзины…`,loadError:`Не удалось загрузить корзину.`,empty:`Корзина пуста.`,summary:`{{count}} файлов · {{size}}`,emptyTrash:`Очистить корзину`,restore:`Восстановить`,purgeNow:`Удалить сейчас`,autoPurgeIn:`Автоудаление через {{when}}`,days:`дней`,retentionLabel:`Автоудаление через`,selectAll:`Выбрать всё`,selectOne:`Выбрать {{filename}}`,selectionCount:`Выбрано: {{count}}`,bulkRestore:`Восстановить выбранные`,bulkPurge:`Удалить выбранные`,col:{filename:`Файл`,folder:`Папка`,size:`Размер`,deleted:`Перемещён в корзину`,autoPurge:`Автоудаление`,owner:`Владелец`,actions:`Действия`},confirm:{purgeTitle:`Удалить навсегда?`,purgeBody:`Файл {{filename}} будет удалён с диска без возможности восстановления.`,emptyTitle:`Очистить корзину?`,emptyBody:`Все файлы ({{count}}) будут удалены с диска. Отменить это действие нельзя.`,bulkPurgeTitle:`Удалить выбранные файлы навсегда?`,bulkPurgeBody:`Выбранные файлы ({{count}}) будут удалены с диска без возможности восстановления.`,cta:`Удалить навсегда`},toast:{restored:`Файл восстановлен.`,restoreFailed:`Не удалось восстановить файл.`,purged:`Файл удалён навсегда.`,purgeFailed:`Не удалось удалить файл.`,emptied:`Из корзины удалено файлов: {{count}}.`,emptyFailed:`Не удалось очистить корзину.`,retentionSaved:`Срок автоудаления: {{days}} дней.`,retentionFailed:`Не удалось сохранить срок хранения.`,bulkRestored:`Восстановлено файлов: {{count}}.`,bulkPurged:`Удалено файлов: {{count}}.`}},libraryPurge:{title:`Очистить старые файлы`,headerButton:`Очистить старые`,headerTooltip:`Массово переместить старые файлы в корзину`,description:`За один проход убирает старые файлы из библиотеки. Для печатавшихся файлов возраст считается от даты последней печати, для ни разу не печатавшихся — от даты загрузки.`,ageLabel:`Переместить файлы старше`,days:`дней`,includeNeverPrinted:`Включить файлы, которые ни разу не печатались`,effectsTitle:`Что произойдёт после нажатия «Очистить»`,effect1:`Подходящие файлы будут перемещены в корзину, но пока не удалены с диска.`,effect2:`Их можно восстановить из корзины до окончания срока хранения.`,effect3:`После окончания срока хранения очистка корзины окончательно удалит их с диска.`,effect4:`Файлы во внешних подключённых папках пропускаются: Bambuddy не удаляет чужие данные.`,previewLoading:`Подсчёт подходящих файлов…`,previewFailed:`Не удалось выполнить предварительный расчёт.`,previewSummary:`В корзину будет перемещено: {{count}} файлов · {{size}}`,andMore:`…и ещё {{count}}`,warning:`Файлы в корзине продолжают занимать место до окончания срока хранения. Чтобы освободить диск сразу, после операции очистите корзину.`,confirmCta:`Переместить в корзину: {{count}}`,purging:`Перемещение в корзину…`,toast:{success:`Перемещено в корзину файлов: {{count}}.`,failed:`Не удалось очистить файлы.`}},libraryAutoPurge:{enableLabel:`Автоматически очищать старые файлы`,enableDescription:`Раз в сутки запускает административную очистку. Сначала файлы попадают в корзину и не удаляются немедленно.`,ageLabel:`Автоматически очищать файлы старше`,ageDescription:`Минимум 7 дней, максимум 10 лет. Используется тот же способ расчёта возраста, что и при ручной очистке.`,days:`дней`,includeNeverPrinted:`Включить файлы, которые ни разу не печатались`,saveFailed:`Не удалось сохранить настройки автоочистки.`},archivePurge:{headerButton:`Очистить старые`,headerTooltip:`Массово удалить старые записи архива`,title:`Очистить старые записи архива`,description:`Удаляет старую историю печати. Возраст записи считается от последнего завершения печати; повторная печать обновляет дату, поэтому используемые записи не удаляются.`,ageLabel:`Удалить записи, которые не печатались последние`,days:`дней`,effectsTitle:`Что произойдёт после нажатия «Очистить»`,effect1:`Каждая подходящая запись будет скрыта из списков, а связанные файлы удалены с диска: 3MF, миниатюра, таймлапс, исходный 3MF, проект F3D и фотографии.`,effect2:`Строка архива останется в базе, поэтому быстрая статистика сохранит вклад по филаменту, времени, стоимости и энергии — как при обычном удалении отдельной записи.`,effect3:`Установите флажок «Также удалить из статистики», чтобы исключить вклад из быстрой статистики. Это действие необратимо.`,effect4:`Повторная печать обновляет дату записи, поэтому используемые архивы не удаляются.`,purgeStatsLabel:`Также удалить из статистики`,purgeStatsHint:`Исключает соответствующие записи из быстрой статистики по филаменту, времени, стоимости и энергии. Без этого удаляются только файлы, а статистика сохраняется.`,previewLoading:`Подсчёт подходящих записей…`,previewFailed:`Не удалось выполнить предварительный расчёт.`,previewSummary:`Будет удалено: {{count}} записей · {{size}}`,andMore:`…и ещё {{count}}`,warning:`Файлы будут удалены с диска без возможности восстановления. Перед продолжением скачайте или добавьте в избранное всё, что нужно сохранить.`,confirmCta:`Удалить записей: {{count}}`,purging:`Удаление…`,toast:{success:`Удалено записей архива: {{count}}.`,failed:`Не удалось очистить архив.`}},archiveAutoPurge:{enableLabel:`Автоматически очищать старые записи архива`,enableDescription:`Раз в сутки скрывает записи из списков и удаляет их файлы с диска, если они не печатались в течение заданного срока. Повторная печать сбрасывает отсчёт.`,ageLabel:`Автоматически удалять записи, которые не печатались последние`,ageDescription:`Минимум 7 дней, максимум 10 лет. Срок считается от последнего завершения печати; повторная печать обновляет дату. Удаляются 3MF, миниатюра, таймлапс, исходный 3MF, F3D и фотографии.`,days:`дней`,purgeStatsLabel:`Также удалить из статистики`,purgeStatsDescription:`Если включено, ежедневная очистка исключает удалённые записи из быстрой статистики по филаменту, времени, стоимости и энергии. По умолчанию выключено: статистика сохраняется, удаляются только файлы.`,runNow:`Очистить архив сейчас`,saveFailed:`Не удалось сохранить настройки автоочистки.`},cameraTokens:{scope:{camera_stream:`Поток камеры`,camwall:`Стена камер`,overlay:`Оверлей для стрима`},title:`Токены API камеры`,navTitle:`Токены API камеры`,description:`Долгоживущие токены для встраивания видеопотока в Home Assistant, Frigate, киоски и другие системы, которым нужен постоянный URL. Каждый токен даёт доступ только к потоку камеры и может быть отозван в любой момент.`,loading:`Загрузка...`,confirmRevoke:{title:`Отозвать этот токен?`,body:`Все устройства, использующие «{{name}}», немедленно потеряют доступ. Отменить это действие нельзя.`,cancel:`Отмена`,confirm:`Отозвать`},create:{scopeLabel:`Область действия`,hintCameraStream:`Токен потока камеры позволяет получать только видеопотоки и снимки. Используйте его для Home Assistant, Frigate и других систем, встраивающих изображение с одной камеры.`,hintCamWall:`Токен стены камер открывает страницу /camwall на экране без авторизации. Он позволяет видеть названия и состояния всех принтеров, а также видеопотоки с их камер. Имена файлов, адреса и коды доступа недоступны.`,hintOverlay:`Токен оверлея для стрима открывает страницу /overlay/{printerId} на экране без авторизации — для OBS или любой прямой трансляции. Он даёт доступ к видеопотоку одного принтера и его текущему статусу печати, включая имя файла, отображаемое на экране. Адреса и коды доступа недоступны.`,title:`Создать токен`,nameLabel:`Название токена`,namePlaceholder:`Например, Home Assistant`,daysLabel:`Срок действия, дней`,submit:`Создать`,hint:`Максимальный срок действия — 365 дней. Значение токена показывается только один раз при создании — скопируйте его сейчас.`},created:{camWallUrlTitle:`URL стены камер для этого экрана`,camWallUrlHint:`Откройте этот адрес на экране. Любой, кто получит URL, сможет наблюдать за стеной камер, поэтому обращайтесь с ним как с ключом. Отзовите токен, чтобы отключить экран.`,overlayUrlTitle:`URL оверлея для OBS`,overlayUrlHint:`Добавьте этот адрес как источник браузера (Browser Source) в OBS. Замените число в /overlay/1 на номер вашего принтера (его можно узнать из URL на странице «Принтеры»). Любой, кто получит URL, сможет смотреть трансляцию, поэтому обращайтесь с ним как с ключом — отзовите токен, чтобы прекратить доступ.`,title:`Токен создан — скопируйте его сейчас`,warning:`Это единственный раз, когда токен отображается. После закрытия окна посмотреть его снова будет невозможно.`,copy:`Копировать`,dismiss:`Я сохранил токен`},list:{scope:`Область действия`,myTitle:`Мои токены`,allTitle:`Все пользователи (режим администратора)`,empty:`Токенов пока нет.`,name:`Название`,owner:`Владелец`,prefix:`Префикс`,created:`Создан`,expires:`Истекает`,lastUsed:`Последнее использование`,revoke:`Отозвать`,expired:`Истёк`},toast:{created:`Токен создан`,createFailed:`Не удалось создать токен`,revoked:`Токен отозван`,revokeFailed:`Не удалось отозвать токен`,loadFailed:`Не удалось загрузить токены`,copied:`Скопировано в буфер обмена`,copyFailed:`Не удалось скопировать — выделите и скопируйте вручную`}},forecast:{title:`Прогноз`,noSpools:`Активные катушки не найдены. Добавьте катушки в учёт, чтобы увидеть прогноз.`,noUsageData:`Нет данных о расходе — невозможно спрогнозировать остатки.`,sku:`Артикул`,material:`Материал`,stock:`Запас`,dailyRate:`Расход`,daysLeft:`Осталось дней`,emptyBy:`Закончится к`,reorderBy:`Заказать до`,actions:`Действия`,trend:`Тренд`,estimated:`Оценка`,noData:`Нет данных`,timeframe:`Период`,chartTitle:`Прогноз запаса — 5 основных материалов`,dashedLinesROP:`Пунктирные линии — точки заказа`,stockLevel:`Уровень запаса`,reorderPoint:`Точка заказа`,safetyMargin:`Страховой запас`,trendLegend:`Тренд (по истории, уровень обслуживания 95%)`,estimatedLegend:`Оценка (по изменению массы)`,noDataLegend:`Нет данных`,ropLabel:`ТЗ`,ssLabel:`СЗ`,safetyStockLegend:`Страховой запас`,stockArrivalLegend:`Поступление`,stockoutLegend:`Исчерпание запаса`,alertCount_one:`{{count}} предупреждение`,alertCount_other:`{{count}} предупреждений`,order:`Заказать`,save:`Сохранить`,cancel:`Отмена`,settingsSaved:`Настройки сохранены`,failedSaveSettings:`Не удалось сохранить настройки`,globalLeadTimeSaved:`Общий срок поставки сохранён`,globalLeadTime:`Общий срок поставки`,globalLeadTimeHint:`Минимальный общий срок поставки, используемый при расчёте точки заказа для всех артикулов`,skuLeadTimeOverride:`Переопределение срока поставки`,skuLeadTimeHint:`0 — использовать общий срок поставки. Значение больше 0 переопределяет его для этого артикула.`,safetyMarginLabel:`Страховой запас`,effectiveLeadTime:`Фактический срок поставки`,effectiveLeadTimeHint:`макс. (общий {{global}} дн., для артикула {{sku}} дн.)`,reorderPointHint:`средний расход × срок поставки + страховой запас — заказывайте, когда остаток достигнет этого уровня`,safetyMarginHint:`Статистический страховой запас (z=1,65 × σ × √LT) плюс заданный пользователем резерв`,safetyMarginHintDays:`Резерв поверх статистического страхового запаса.{{approx}}`,safetyMarginHintDaysApprox:` ≈ {{g}} г при текущем расходе.`,safetyMarginHintG:`Фиксированный весовой резерв поверх статистического страхового запаса.{{approx}}`,safetyMarginHintGApprox:` ≈ {{days}} дн. при текущем расходе.`,individualSpools:`Отдельные катушки`,labelWeight:`Метка`,spoolCount_one:`{{count}} катушка`,spoolCount_other:`{{count}} катушек`,stockBreakRisk:`Риск исчерпания запаса`,stockBreakDetail:`Осталось {{days}} дн., срок поставки {{lt}} дн.`,stockBreakBefore:`Запас закончится до пополнения`,reorderNow:`Заказать сейчас`,reorderTriggerPassed:`Дата заказа {{date}} уже прошла.`,shoppingList:`Список покупок`,shoppingListItems_one:`({{count}} позиция)`,shoppingListItems_other:`({{count}} позиций)`,shoppingListEmpty:`Список покупок пуст. Нажмите значок корзины в нужной строке, чтобы добавить позицию.`,addToCart:`Добавить в список покупок`,alertsSnoozed:`Отключить предупреждения для артикула`,alertsEnabled:`Включить предупреждения для артикула`,addedToCart:`Добавлено в список покупок`,failedAddItem:`Не удалось добавить позицию`,listView:`Список`,logisticsView:`Логистика`,qty:`Кол-во`,weight:`Масса`,leadTime:`Срок поставки`,expectedRestock:`Ожидаемое пополнение`,status:`Состояние`,note:`Примечание`,pending:`Ожидается`,purchased:`Куплено`,received:`Получено`,markPurchased:`Отметить как купленное`,markReceived:`Отметить как полученное — катушки будут добавлены в запас`,resetToPending:`Вернуть в ожидание`,remove:`Удалить`,clearAll:`Очистить всё`,downloadCsv:`CSV`,addToCartTitle:`Добавить в список покупок`,byQuantity:`По количеству`,byDuration:`По сроку`,numberOfSpools:`Количество катушек`,lastHowManyDays:`На сколько дней должно хватить?`,noUsageQty:`Нет данных о расходе — количество установлено равным 1.`,noteOptional:`Примечание (необязательно)`,notePlaceholder:`например, для проекта X, срочно…`,addNSpools_one:`Добавить {{count}} катушку`,addNSpools_other:`Добавить {{count}} катушек`,onArrival:`После поступления`,stockBreakIn:`Запас закончится через {{days}} дн.`,stockRunsOutBefore:`Запас закончится раньше, чем истекут {{lt}} дн. срока поставки.`,atRate:`При расходе {{rate}} г/день требуется`,moreSpools_one:`ещё {{count}} катушка`,moreSpools_other:`ещё {{count}} катушек`,bridgeGap:`чтобы перекрыть дефицит.`,noReadAccess:`У вас нет прав на просмотр прогноза запасов.`,noWriteAccess:`У вас нет прав на изменение настроек прогноза.`}}},uk:{translation:{nav:{printers:`Принтери`,archives:`Архіви`,queue:`Черга друку`,stats:`Статистика`,profiles:`Профілі`,maintenance:`Технічне обслуговування`,projects:`Проєкти`,inventory:`Філамент`,finance:`Фінанси`,files:`Менеджер файлів`,makerworld:`MakerWorld`,notifications:`Сповіщення`,settings:`Налаштування`,system:`Система`,collapseSidebar:`Згорнути бічну панель`,expandSidebar:`Розгорнути бічну панель`,update:`Оновити`,updateAvailable:`Доступне оновлення: v{{version}}`,updateAvailableBanner:`Доступна версія {{version}}!`,viewUpdate:`Переглянути оновлення`,viewOnGithub:`Переглянути на GitHub`,keyboardShortcuts:`Комбінації клавіш (?)`,switchToLight:`Перейти у світлий режим`,switchToDark:`Перейти у темний режим`,switchToSystem:`Перейти в системний режим`,smartSwitches:`Розумні перемикачі`,logout:`Вийти`,installApp:`Встановити додаток`,installAppSuccess:`Bambuddy встановлено`},common:{plusNMore:`ще {{count}}`,save:`Зберегти`,saving:`Збереження...`,cancel:`Скасувати`,delete:`Видалити`,edit:`Редагувати`,add:`Додати`,close:`Закрити`,confirm:`Підтвердити`,loading:`Завантаження...`,error:`Помилка`,errorLoading:`Помилка завантаження даних`,retry:`Повторити`,success:`Успіх`,warning:`Попередження`,enabled:`Увімкнено`,disabled:`Вимкнено`,yes:`Так`,no:`Ні`,on:`Увімкнено`,off:`Вимкнено`,all:`Усі`,none:`Жодного`,search:`Пошук`,filter:`Фільтр`,sort:`Сортувати`,refresh:`Оновити`,download:`Завантажити`,upload:`Вивантажити`,uploading:`Вивантаження...`,uploadFailed:`Не вдалося вивантажити`,actions:`Дії`,status:`Статус`,name:`Назва`,description:`Опис`,date:`Дата`,time:`Час`,hours:`год`,minutes:`хв`,seconds:`с`,days:`дн.`,enable:`Увімкнути`,disable:`Вимкнути`,permissions:`Дозволи`,noPrinters:`Принтери не налаштовані`,noData:`Немає даних`,linkNotFound:`Посилання не знайдено`,required:`Обов’язковий`,optional:`Необов’язково`,dismiss:`Закрити`,apply:`Застосувати`,reset:`Скинути`,export:`Експортувати`,import:`Імпортувати`,clear:`Очистити`,selectAll:`Вибрати всі`,deselectAll:`Зняти вибір із усіх`,noChange:`— Без змін —`,unchanged:`Без змін`,unassigned:`Не призначено`,unknown:`Невідомо`,unknownError:`Невідома помилка`,today:`Сьогодні`,tomorrow:`Завтра`,asap:`Якнайшвидше`,overdue:`Протерміновано`,now:`Зараз`,collapse:`Згорнути`,expand:`Розгорнути`,previous:`Попередній`,next:`Далі`,viewArchive:`Переглянути архів`,viewInFileManager:`Переглянути в менеджері файлів`,addedBy:`Додав {{username}}`,prints:`друків`,more:`+ ще {{count}}`,ascending:`За зростанням`,descending:`За спаданням`,back:`Назад`,copy:`Копіювати`,copied:`Скопійовано!`,printer:`Принтер`,remove:`Видалити`,type:`Тип`,print:`Друкувати`,rename:`Перейменувати`,move:`Перемістити`,create:`Створити`,duplicate:`Дублювати`,left:`Ліворуч`,right:`Праворуч`,user:`Користувач`,run:`Запустити`,running:`Виконується...`},finance:{allTypes:`Усі типи`,allCostCenters:`Усі центри витрат`,title:`Фінанси`,subtitle:`Гаманець, особисті операції та центри витрат`,noAccess:`У вас немає дозволу на перегляд фінансових даних.`,personalView:`Особистий режим`,adminView:`Режим адміністратора`,createCostCenter:`Створити центр витрат`,adjustWallet:`Скоригувати гаманець`,addManualPrint:`Додати ручний друк`,manageMembers:`Керувати учасниками центру витрат`,currentBalance:`Особистий баланс`,transactions:`Операції`,personalTransactions:`Особисті операції`,costCenters:`Центри витрат`,availableForPrinting:`Доступний для призначення друку`,costCenterName:`Назва`,budgetType:`Тип бюджету`,monthlyBudget:`Місячний бюджет`,totalBudget:`Загальний бюджет`,noBudget:`Без бюджету`,create:`Створити`,selectUser:`Виберіть користувача`,transactionType:`Тип`,amount:`Сума`,noCostCenter:`Без центру витрат`,descriptionOptional:`Опис (необов’язково)`,applyAdjustment:`Застосувати коригування`,memberCanPrint:`Учасник може друкувати`,addMember:`Додати учасника`,canPrint:`Може друкувати`,noMembers:`Учасників не призначено.`,editCostCenter:`Редагувати центр витрат`,myCostCenters:`Мої центри витрат`,costCentersHint:`Переглядайте бюджетні ліміти та контролюйте витрати`,noCostCenters:`Центрів витрат не знайдено.`,owner:`Власник`,balance:`Баланс рахунку`,unlimited:`Без обмежень`,budgetPolicyHint:`Баланс рахунку використовується для обліку витрат. Друк обмежується лише бюджетом вибраного центру витрат; без бюджету обмежень немає.`,budget:`Бюджет`,shared:`Спільний`,cannotEditPrivateCostCenter:`Особисті центри витрат не можна редагувати тут`,recentTransactions:`Останні операції`,transactionsHint:`Фільтрувати за типом і центром витрат`,first:`Перша`,prev:`Попередня`,next:`Наступна`,last:`Остання`,pageNumberOf:`Сторінка {{page}} з {{total}}`,noTransactions:`Немає доступних операцій.`,noTransactionsForFilter:`Немає операцій, що відповідають вибраним фільтрам.`,costCenter:`Центр витрат`,balanceAfter:`Баланс після операції`,userWithId:`Користувач №{{id}}`,partial:`Частково`,editTransaction:`Редагувати операцію`,selectCostCenter:`Виберіть центр витрат...`,costCenterRequired:`Виберіть центр витрат`,amountExample:`наприклад, 4,00`,manualAdjustmentExample:`наприклад, ручне коригування`,userRequired:`Виберіть користувача`,amountInvalid:`Сума має бути дійсним числом`,createdCostCenter:`Центр витрат створено`,createCostCenterFailed:`Не вдалося створити центр витрат`,transactionDeleted:`Операцію видалено`,deleteTransactionFailed:`Не вдалося видалити операцію`,transactionEdited:`Операцію оновлено, бухгалтерську книгу перераховано`,editTransactionFailed:`Не вдалося редагувати операцію`,manualPrintCreated:`Витрати на ручний друк додано, бухгалтерську книгу перераховано`,manualPrintFailed:`Не вдалося додати ручний друк`,memberSaved:`Учасника збережено`,memberSaveFailed:`Не вдалося зберегти учасника`,memberRemoved:`Учасника видалено`,memberRemoveFailed:`Не вдалося видалити учасника`,costCenterNameRequired:`Назва центру витрат є обов’язковою`,costCenterUpdated:`Центр витрат оновлено`,costCenterUpdateFailed:`Не вдалося оновити центр витрат`,confirmDeleteCostCenter:`Видалити центр витрат «{{name}}»?`,costCenterDeleted:`Центр витрат видалено`,costCenterDeleteFailed:`Не вдалося видалити центр витрат`,deleteTransactionConfirm:`Видалити цю операцію? Баланси буде перераховано автоматично.`,deposit:`Поповнення`,withdraw:`Списання`,printCharge:`Витрати на друк`,deleteTransaction:`Видалити операцію`},printers:{title:`Принтери`,addPrinter:`Додати принтер`,addPreflight:{checking:`Перевірка підключення...`,warning:`Деякі перевірки підключення завершилися невдало. Принтер може відображатися як офлайн. Перегляньте результати нижче, усуньте можливі проблеми або все одно збережіть принтер.`,back:`Назад`,saveAnyway:`Усе одно зберегти`},editPrinter:`Редагувати принтер`,deletePrinter:`Видалити принтер`,printerName:`Назва принтера`,serialNumber:`Серійний номер`,ipAddress:`IP-адреса / ім’я хоста`,accessCode:`Код доступу`,model:`Модель`,nozzleCount:`Кількість сопел`,autoArchive:`Автоархів`,status:{available:`Доступний`,idle:`Неактивний`,printing:`Друк`,paused:`Призупинено`,offline:`Не в мережі`,problem:`Проблема`,error:`Помилка`,finished:`Готово`,unknown:`Невідомий`},temperatures:{nozzle:`Сопло`,bed:`Стіл`,chamber:`Камера`},heaterHistory:{title:`Історія нагрівання`,openLabel:`Переглянути історію нагрівання`,nozzle:`Сопло`,nozzle2:`Сопло 2`,bed:`Стіл`,chamber:`Камера`,error:`Не вдалося завантажити історію`,empty:`Дані ще не записані`},progress:`{{percent}}% виконано`,timeRemaining:`Залишилося {{time}}`,deleteConfirm:`Ви впевнені, що хочете видалити "{{name}}"?`,maintenanceOk:`Технічне обслуговування в порядку`,maintenanceWarning:`{{count}} попередження`,maintenanceWarning_plural:`{{count}} попередження`,maintenanceDue:`Потрібне обслуговування: {{count}}`,maintenanceDue_plural:`Потрібне обслуговування: {{count}}`,sort:{name:`Назва`,status:`Статус`,model:`Модель`,location:`Розташування`,eta:`Орієнтовне завершення`,ascending:`Сортувати за зростанням`,descending:`Сортувати за спаданням`},cardSize:{small:`Маленькі картки`,medium:`Середні картки`,large:`Великі картки`,extraLarge:`Дуже великі картки`},pageView:{openCamWallPage:`Відкрити панель камер як окрему сторінку`,cards:`Картки`,camWall:`Панель камер`},camWall:{page:{tokenRejected:`Це посилання на панель камер більше не дійсне. Можливо, термін дії токена минув або токен було відкликано.`,loadFailed:`Не вдалося завантажити список принтерів.`},noPrinters:`Немає принтерів для показу`,noSignal:`Немає сигналу`,live:`Наживо`,snap:`Знімок`,off:`Вимкнено`,summary:`{{live}} наживо, {{snap}} знімки, {{total}} всього`,layer:`Шар {{cur}}/{{total}}`,timeLeft:`Залишилося {{time}}`,statusMode:{off:`Вимкнено`,compact:`Компактний`,full:`Повний`},settings:{title:`Налаштування Cam Wall`,maxLive:`Максимальна кількість прямих трансляцій`,maxLiveHint:`Кількість плиток, що одночасно показують пряму трансляцію. Решта оновлюються як знімки.`,snapshotInterval:`Інтервал знімка (секунди)`,snapshotIntervalHint:`Як часто плитки без прямої трансляції отримують новий знімок.`,statusOverlay:`Накладення стану`,statusOverlayHint:`Компактний: лише значок стану. Повний: значок, прогрес, шар і час, що залишився.`}},hideOffline:`Приховати офлайн-принтери`,nextAvailable:`Наступний доступний`,powerOn:`Увімкнути`,offlinePrintersWithPlugs:`Офлайн-принтери з розумними розетками`,noPrintersConfigured:`Принтерів ще не налаштовано`,search:`Пошук принтерів...`,noSearchResults:`Немає принтерів, які відповідають вашому пошуку або фільтрам`,filter:{allStatuses:`Усі статуси`,allLocations:`Усі розташування`},toolbar:{filters:`Фільтри`,view:`Вигляд`,actions:`Дії`},readyToPrint:`Готовий до друку`,external:`Зовнішній`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Видалити архіви друку`,noLabel:`Без етикетки`,printPreview:`Попередній перегляд`,width:`Ширина`,height:`Висота`,noObjectsFound:`Об’єктів не знайдено`,objectsLoadedOnPrintStart:`Об’єкти завантажуються після початку друку`,willBeSkipped:`Буде пропущено`,name:`Назва`,serialCannotBeChanged:`Серійний номер не можна змінити`,locationHelp:`Використовується для групування принтерів і фільтрації завдань у черзі`,wifiSignal:{veryWeak:`Дуже слабкий`,weak:`Слабкий`,fair:`Задовільний`,good:`Добрий`,excellent:`Чудово`},maintenanceUpToDate:`Усі роботи з технічного обслуговування виконано — натисніть, щоб переглянути`,maintenance:{title:`На технічному обслуговуванні`,subtitle:`Роботу цього принтера призупинено: він не підключається, не отримує завдань із черги й не надсилає сповіщень.`,pillLabel:`Технічне обслуговування`,exitButton:`Вийти з технічного обслуговування`,menuEnter:`Увійти в режим обслуговування`,menuExit:`Вийти з режиму обслуговування`,toastEntered:`{{name}} зараз у режимі обслуговування`,toastExited:`{{name}} знову в мережі`,confirmMidPrintTitle:`Перевести принтер у режим обслуговування під час друку?`,confirmMidPrintMessage:`{{name}} зараз друкує. Перехід у режим обслуговування відключить MQTT і припинить відстеження перебігу друку та сповіщення про завершення цього завдання. Продовжити?`,editFieldLabel:`Режим обслуговування`,editFieldHelp:`Коли режим увімкнено, принтер відключається від MQTT, не отримує завдань із черги й не надсилає сповіщень. Використовуйте цей режим під час ремонту, паралельного розгортання Bambuddy або тимчасового виведення принтера з роботи.`},chamberLightOn:`Увімкнути світло в камері`,chamberLightOff:`Вимкнути світло в камері`,files:`Файли`,browseFiles:`Переглянути файли принтера`,autoOffAfterPrint:`Автоматичне вимкнення після друку`,autoOffExecuted:`Автоматичне вимкнення виконано — увімкніть принтер, щоб скинути стан`,hmsErrors:`Помилки HMS`,viewHmsErrors:`Переглянути помилки HMS ({{count}})`,resume:`Відновити`,pause:`Призупинити`,stop:`Зупинити`,camera:`Камера`,skipObject:`Пропустити об’єкт`,reconnect:`Підключитися знову`,forceRefresh:`Примусово оновити`,forceRefreshSuccess:`Оновлення запитано`,mqttDebug:`Налагодження MQTT`,printerInformation:`Інформація про принтер`,copyToClipboard:`Копіювати`,copied:`Скопійовано!`,state:`Стан`,wifiSignalLabel:`Сигнал Wi‑Fi`,developerMode:`Режим розробника`,enabled:`Увімкнено`,disabled:`Вимкнено`,addedOn:`Додано`,sdCard:`SD-картка`,inserted:`Вставлено`,notInserted:`Не вставлено`,totalPrintHours:`Загальний час друку`,activeNozzle:`Активне сопло: {{nozzle}}`,amsSwitchInletTooltip:`Перемикач тракту філаменту IN-{{inlet}} ({{side}}) — подає на обидва сопла`,nozzleRack:`Стійка сопел`,nozzleDocked:`У док-станції`,nozzleMounted:`Установлено`,nozzleActive:`Активний`,nozzleIdle:`Неактивний`,nozzleDiameter:`Діаметр`,nozzleType:`Тип`,nozzleStatus:`Статус`,nozzleFilament:`Філамент`,nozzleWear:`Знос`,nozzleMaxTemp:`Макс. температура`,nozzleSerial:`Серійний номер`,nozzleHardenedSteel:`Загартована сталь`,nozzleStainlessSteel:`Нержавіюча сталь`,nozzleTungstenCarbide:`Карбід вольфраму`,nozzleFlow:`Потік`,nozzleHighFlow:`Високий потік`,nozzleStandardFlow:`Стандартний`,firmwareUpdate:`Оновлення прошивки`,firmwareInstructions:`На сенсорному екрані принтера перейдіть до`,firmwareNav:`Перейдіть до`,settings:`Налаштування`,firmware:`Прошивка`,discoverPrinters:`Знайти принтери`,searching:`Пошук...`,manualEntry:`Ввести вручну`,addFromCloud:`Додати з хмари`,toast:{printerDeleted:`Принтер видалено`,missingSpoolAssignment:`Друк на {{printer}} розпочато. Для слотів {{slots}} не призначено котушки.`,killSwitchTriggered:`Аварійний вимикач білінгу зупинив несанкціонований друк на {{printer}}: {{filename}}`,billingChargeFailed:`Не вдалося нарахувати вартість {{filename}} на {{printer}}. Резерв бюджету збережено; перевірте журнали сервера.`,assignmentVerified:`Філамент завантажено в слот AMS {{slot}} принтера {{printer}}`,assignmentVerifiedNoKprofile:`Слот AMS {{slot}} на {{printer}} завантажено, але калібрування потоку (K-профіль) не застосовано`,assignmentNotConfirmed:`Не вдалося підтвердити призначення для слота {{slot}} на {{printer}} — перевірте слот AMS`,printerAdded:`Додано принтер`,printerUpdated:`Принтер оновлено`,failedToDelete:`Не вдалося видалити принтер`,failedToAdd:`Не вдалося додати принтер`,connectionFailedNotAdded:`Не вдалося підключитися до принтера. Перевірте IP, серійний номер і код доступу, а також підтвердьте, що режим лише для LAN увімкнено. Принтер не додано.`,failedToUpdate:`Не вдалося оновити принтер`,commandSent:`Команда надіслана`,failedToSendCommand:`Не вдалося надіслати команду`,turnedOn:`{{name}} увімкнено`,failedToPowerOn:`Не вдалося ввімкнути {{name}}`,scriptTriggered:`Сценарій запущено`,printStopped:`Друк зупинено`,printPaused:`Друк призупинено`,printResumed:`Друк відновлено`,referenceDeleted:`Еталонне зображення видалено`,detectionAreaSaved:`Область виявлення збережено`,failedToRunScript:`Не вдалося запустити сценарій`,failedToStopPrint:`Не вдалося зупинити друк`,failedToPausePrint:`Не вдалося призупинити друк`,failedToResumePrint:`Не вдалося відновити друк`,failedToControlChamberLight:`Не вдалося керувати світлом камери`,failedToSetSpeed:`Не вдалося встановити швидкість друку`,failedToUpdateSetting:`Не вдалося оновити налаштування`,failedToSkipObjects:`Не вдалося пропустити об’єкти`,failedToRereadRfid:`Не вдалося перечитати RFID`,failedToCheckPlate:`Не вдалося перевірити друкарську пластину`,failedToUpdateLabel:`Не вдалося оновити мітку`,failedToDeleteReference:`Не вдалося видалити еталонне зображення`,failedToSaveDetectionArea:`Не вдалося зберегти область виявлення`,plateCheckEnabled:`Перевірку друкарської пластини ввімкнено`,plateCheckDisabled:`Перевірку друкарської пластини вимкнено`,calibrationSaved:`Калібрування збережено!`,calibrationFailed:`Не вдалося виконати калібрування`,rfidRereadInitiated:`Розпочато повторне зчитування RFID`,loadInitiated:`Завантаження філаменту...`,unloadInitiated:`Вивантаження філаменту...`,failedToLoad:`Не вдалося завантажити філамент`,failedToUnload:`Не вдалося вивантажити філамент`},connection:{connected:`Підключено`,offline:`Не в мережі`},plateStatus:{markCleared:`Позначити друкарську пластину як очищену`,cleared:`Друкарську пластину очищено`,notCleared:`Друкарську пластину не очищено`,inUse:`Друкарська пластина використовується`},queue:{inQueue:`У черзі: {{count}}`,inQueue_plural:`У черзі: {{count}}`},controls:`Елементи керування`,rfid:{reread:`Перечитати RFID`},ams:{load:`Завантажити`,unload:`Вивантажити`,feedTitle:`У яке сопло завантажити {{slot}}?`,feedPrompt:`Filament Track Switch може спрямувати цей слот до будь-якого з хотендів. Виберіть, у який подавати.`,feedLeft:`Ліве сопло`,feedRight:`Праве сопло`,feedAlreadyLoaded:`Уже завантажено`,switchNotReady:`Filament Track Switch ще не налаштовано. Призначте кожній AMS вхід на принтері й спробуйте ще раз.`},bedJog:{limitWarning:`Під час ручного переміщення межі ходу не контролюються: через помилку прошивки Bambu віддалені команди ігнорують програмні кінцеві обмежувачі. Переміщуйте стіл обережно, щоб уникнути зіткнення.`,title:`Керування переміщенням`,bed:`Стіл`,step:`Крок (мм)`,up:`Перемістити стіл угору`,down:`Перемістити стіл униз`,toolheadUp:`Перемістити друкувальну голову вгору`,toolheadDown:`Перемістити друкувальну голову вниз`,disabledWhilePrinting:`Вимкнено під час друку`,notHomedTitle:`Принтер не відкалібровано за початковою позицією`,notHomedMessage:`Після останнього друку принтер не виконував пошук початкової позиції. Для безпечного позиціювання спочатку запустіть автопозиціювання: принтер припаркує друкувальну головку та визначить початкові координати X, Y і Z. Або продовжте переміщення без нього — програмні кінцеві обмежувачі буде обійдено.`,homeZ:`Запустити автопозиціювання`,moveAnyway:`Усе одно перемістити`,homingStarted:`Виконується автопозиціювання принтера…`},permission:{noAdd:`Ви не маєте дозволу додавати принтери`,noEdit:`Ви не маєте дозволу редагувати принтери`,noDelete:`Ви не маєте дозволу на видалення принтерів`,noControl:`Ви не маєте дозволу керувати принтерами`,noFiles:`Ви не маєте дозволу на доступ до файлів принтера`,noAmsRfid:`Ви не маєте дозволу на повторне читання AMS RFID`,noSmartPlugControl:`Ви не маєте дозволу керувати розумними розетками`,noCamera:`У вас немає дозволу на перегляд камер`},modal:{addTitle:`Додати принтер`,editTitle:`Редагувати принтер`,myPrinter:`Мій принтер`,selectModel:`Вибрати модель…`,locationGroup:`Розташування/група (необов’язково)`,locationPlaceholder:`наприклад, майстерня, офіс, підвал`,autoArchiveLabel:`Автоматичне архівування завершених роздруківок`,fromPrinterSettings:`З налаштувань принтера`,modelOptional:`Модель (необов’язково)`,saveChanges:`Зберегти зміни`},skipObjects:{tooltip:`Пропустити об’єкти`,onlyWhilePrinting:`Пропустити об’єкти (лише під час друку)`,requiresMultiple:`Пропустити об’єкти (потрібно щонайменше 2 об’єкти)`,title:`Пропустити об’єкти`,matchIdsInfo:`Зіставте ідентифікатори з дисплеєм принтера`,printerShowsIds:`На екрані принтера показано ідентифікатори об’єктів на друкарській пластині`,skipSelected:`Пропустити вибране`,skipping:`Пропускання…`,noObjectsSelected:`Об’єкти не вибрано`,selectObjectsToSkip:`Виберіть об’єкти, які потрібно пропустити під час поточного друку`,skipped:`пропущено`,objectsSkipped:`Об’єкти пропущено`,activeCount:`Активних: {{count}}`,waitForLayer:`Щоб пропускати об’єкти, дочекайтеся другого шару або пізніше (зараз шар {{layer}})`,skip:`Пропустити`,confirmTitle:`Пропустити об’єкт?`,confirmMessage:`Ви впевнені, що бажаєте пропустити "{{name}}"? Це неможливо скасувати.`,confirmAllMessage:`Вибрано всі об’єкти, що залишилися. Це зупинить завдання друку. Продовжити?`,confirmMultipleMessage:`Пропустити вибрані об’єкти ({{count}})? Цю дію неможливо скасувати.`},confirm:{deleteTitle:`Видалити принтер`,deleteMessage:`Ви впевнені, що хочете видалити "{{name}}"? Це призведе до видалення всіх налаштувань підключення.`,deleteArchivesNote:`Усю історію друку для цього принтера буде остаточно видалено.`,keepArchivesNote:`Історія друку буде збережена, але більше не пов’язана з цим принтером.`,stopTitle:`Зупинити друк`,stopMessage:`Ви впевнені, що хочете зупинити поточний друк на "{{name}}"? Це призведе до скасування завдання друку.`,stopButton:`Зупинити друк`,pauseTitle:`Призупинити друк`,pauseMessage:`Ви впевнені, що хочете призупинити поточний друк на "{{name}}"?`,pauseButton:`Призупинити друк`,resumeTitle:`Відновити друк`,resumeMessage:`Ви впевнені, що бажаєте відновити друк на "{{name}}"?`,resumeButton:`Відновити друк`,powerOnTitle:`Увімкнути принтер`,powerOnMessage:`Увімкнути живлення принтера «{{name}}»?`,powerOnButton:`Увімкнути`,powerOffTitle:`Вимкнути принтер`,powerOffMessage:`Вимкнути живлення принтера «{{name}}»?`,powerOffWarning:`УВАГА: «{{name}}» зараз друкує. Вимкнення живлення перерве друк і може пошкодити принтер. Продовжити?`,powerOffButton:`Вимкнути`,haToggleTitle:`Перемкнути "{{name}}"`,haToggleMessage:`Перемкнути об’єкт Home Assistant {{entity}}? Це може вимкнути живлення, якщо воно зараз увімкнено.`,haToggleWarning:`УВАГА: "{{name}}" зараз друкується! Перемикання {{entity}} може вимкнути живлення та перервати друк. Продовжити?`,haToggleButton:`Перемкнути`},bulk:{select:`Вибрати`,selectAll:`Вибрати усі`,selectByLocation:`Вибрати за розташуванням`,selected:`Вибрано: {{count}}`,actions:{stop:`Зупинити`,pause:`Призупинити`,resume:`Відновити`,clearPlate:`Очистити стіл`,clearHMS:`Очистити сповіщення`},confirm:{stopTitle:`Зупинити завдання друку: {{count}}`,stopMessage:`Активний друк буде скасовано на вибраних принтерах ({{count}}). Цю дію неможливо скасувати.`,stopButton:`Зупинити все`,pauseTitle:`Призупинити завдання друку: {{count}}`,pauseMessage:`Активний друк буде призупинено на вибраних принтерах ({{count}}).`,pauseButton:`Призупинити все`,clearPlateTitle:`Очистити столи ({{count}})`,clearPlateMessage:`Столи вибраних принтерів ({{count}}) буде позначено очищеними, що може запустити завдання з черги.`,clearPlateButton:`Очистити все`},success:`Дію «{{action}}» виконано на принтерах: {{count}}`,partial:`{{succeeded}} вдалося, {{failed}} не вдалося`,noneApplicable:`Немає вибраних принтерів у належному стані для цієї дії`,selectByState:`Вибрати за станом`},discovery:{title:`Знайти принтери`,searching:`Пошук...`,scanning:`Сканування...`,scanProgress:`Сканування... {{scanned}}/{{total}}`,foundPrinters:`Знайдено принтерів: {{count}}`,noPrintersFound:`Принтерів не знайдено`,noPrintersFoundSubnet:`Немає принтерів у вказаній підмережі.`,noPrintersFoundNetwork:`У мережі не знайдено принтерів.`,allConfigured:`Усі знайдені принтери вже налаштовані.`,alreadyAdded:`Вже додано`,select:`Вибрати`,manualEntry:`Ввести вручну`,addFromCloud:`Додати з хмари`,subnetToScan:`Підмережа для сканування`,dockerNote:`Виявлено Docker. Введіть підмережу принтера в нотації CIDR. У docker-compose.yml потрібен параметр network_mode: host.`,scanSubnet:`Сканувати підмережу для принтерів`,discoverNetwork:`Знайти принтери в мережі`,scanningSubnet:`Сканування підмережі для принтерів Bambu...`,scanningNetwork:`Сканування мережі...`,serialRequired:`Потрібен серійний номер`,unknown:`Невідомий`,failedToStart:`Не вдалося запустити пошук`,customSubnetOption:`Спеціальна підмережа...`,customSubnetLabel:`Спеціальна підмережа (CIDR)`,customSubnetNote:`Укажіть власну підмережу, якщо принтер перебуває в іншій мережі, ніж сервер. Порти FTP (990) і MQTT (8883) мають бути доступні через маршрутизатор.`},drying:{start:`Почати сушіння`,stop:`Зупинити сушіння`,temperature:`Температура`,duration:`Тривалість`,hours:`години`,timeRemaining:`Залишилося {{time}}`,active:`Сушіння`,targetSummary:`{{filament}} при {{temp}}°C`,notSupported:`Сушіння не підтримується`,powerRequired:`Підключіть адаптер живлення AMS, щоб увімкнути сушіння`,cannotDryNow:`AMS зараз не може почати сушіння`,startingDrying:`Запуск сушіння…`,toastCommandSent:`Надіслано команду сушіння`,toastStopped:`Сушіння зупинено`,toastNotStarted:`Принтер прийняв команду, але AMS так і не почав сушити. Перевірте, чи підключено адаптер живлення AMS і чи принтер неактивний.`,screenOnly:`Сушінням AMS на цьому принтері можна керувати лише з екрана принтера (обмеження Bambu)`,stoppingDrying:`Припинення сушіння...`,rotateTray:`Обертати котушку під час сушіння`,rotateUnavailableReason:`Недоступно: філамент із цього слота AMS завантажено в інструментальну головку. Котушка заблокована подавальною трубкою й не може обертатися. Спочатку вивантажте філамент.`,startMode:`Час початку`,modeNow:`Зараз`,modeDelay:`Після затримки`,modeAtTime:`За часом`,schedule:`Запланувати`,scheduledFor:`Сушіння заплановано на {{time}}`,scheduledAsap:`Сушіння заплановано (очікування принтера)`,cancelScheduled:`Скасувати заплановане сушіння`,scheduleFailed:`Не вдалося запланувати сушіння`,retractFilament:`Витягніть філамент із виходу AMS, щоб почати сушіння`,waitingAmsNotFound:`Очікування виявлення AMS`,waitingOffline:`Очікування підключення принтера`,waitingPrinterBusy:`Очікування звільнення принтера`,waitingAlreadyDrying:`Очікування завершення поточного циклу сушіння`,waitingInterrupted:`Перервано, відновиться, коли принтер звільниться`,scheduleFailedReason:`Не вдалося виконати заплановане сушіння: {{reason}}`,scheduleFailedUnknown:`Невідома помилка`,dismissFailed:`Сховати`},amsBackup:{titleOn:`Резервне перемикання філаменту AMS увімкнено. Натисніть, щоб вимкнути.`,titleOff:`Резервне перемикання філаменту AMS вимкнено. Натисніть, щоб увімкнути.`,titleUnknown:`Стан резервної котушки AMS недоступний на цьому принтері.`,toastEnabled:`Резервну котушку AMS ввімкнено`,toastDisabled:`Резервну котушку AMS вимкнено`,modalTitle:`Резервне перемикання філаменту AMS`,modalHelp:`Коли філамент в активному слоті закінчується, принтер по черзі перемикається на слоти з таким самим профілем і кольором у вказаному порядку.`,modalNoSlots:`Філамент не завантажено.`,modalNoPairs:`Немає резервних пар — немає двох слотів з однаковим профілем і кольором філаменту.`,extruderRightShort:`Р`,extruderLeftShort:`Л`,stateOn:`Увімкнено`,stateOff:`Вимкнено`,stateUnknown:`Не підтримується на цьому принтері`},activeJobSlot:{title:`Цей слот відповідає філаменту {{n}} в поточному завданні друку`,ariaLabel:`Слот {{n}} поточного завдання друку`},expectedSlot:{title:`Принтер очікує філамент у цьому слоті`,ariaLabel:`Очікуваний слот для філаменту {{n}}`,label:`{{ams}} · Слот {{slot}}`,external:`Зовнішня котушка`},filaments:`Філаменти`,externalSpool:{hide:`Сховати зовнішню котушку`,show:`Показати зовнішню котушку`},openCameraOverlay:`Відкрити накладання камери`,openCameraWindow:`Відкрити камеру в новому вікні`,firmwareUpdateAvailable:`Доступне оновлення прошивки: {{current}} → {{latest}}`,firmwareUpToDate:`Прошивка {{version}} актуальна`,firmwareUpdateButton:`Оновити`,plateDetection:{noPermission:`Ви не маєте дозволу на оновлення принтерів`,enabledClick:`Перевірку друкарської пластини ввімкнено — натисніть, щоб вимкнути`,disabledClick:`Перевірку друкарської пластини вимкнено — натисніть, щоб увімкнути`,manageCalibration:`Керувати калібруванням перевірки пластини`,calibrationRequired:`Потрібне калібрування`,calibrationInstructions:`Переконайтеся, що робоча пластина <strong>повністю порожня</strong>, а потім натисніть «Калібрувати».`,calibrationDescription:`Під час калібрування створюється еталонне зображення порожньої пластини. Наступні перевірки порівнюватимуть з ним зображення, щоб виявляти об’єкти.`,calibrationTip:`<strong>Порада:</strong> Ви можете зберегти до 5 калібрувань для різних пластин. Під час перевірки система автоматично використовує найкращий збіг.`,plateEmpty:`Друкарська пластина виглядає порожньою`,objectsDetected:`На пластині виявлено об’єкти`,confidence:`Впевненість`,difference:`Різниця`,analysisPreview:`Попередній перегляд аналізу:`,analysisLegend:`Зелена рамка = зона виявлення, червона накладка = відмінності від калібрування`,savedReferences:`Збережені еталонні зображення ({{count}}/{{max}})`,deleteReference:`Видалити еталонне зображення`,labelPlaceholder:`Мітка...`,clickToEdit:`{{label}} - Натисніть, щоб редагувати`,clickToAddLabel:`Натисніть, щоб додати мітку`},speed:{title:`Швидкість друку`,silent:`Тихий (50%)`,standard:`Стандарт (100%)`,sport:`Sport (124%)`,ludicrous:`Ludicrous (166%)`},airduct:{title:`Режим повітропроводу`,cooling:`Охолодження`,heating:`Опалення`},noSdCard:`Немає SD-картки`,door:{open:`Відчинено`,closed:`Закрито`},fans:{partCooling:`Вентилятор охолодження моделі`,auxiliary:`Допоміжний вентилятор`,leftAuxiliary:`Лівий допоміжний вентилятор`,exhaust:`Витяжка`,chamber:`Камерний вентилятор`},clickToViewHmsErrors:`Натисніть, щоб переглянути помилки HMS`,aiDetection:{safe:`Безпечно`,warning:`Попередження`,failure:`Помилка`,idle:`Очікування`,error:`Не перевіряє`,unknown:`Запуск`,tooltipError:`Виявлення помилок за допомогою ШІ не перевіряє цей друк: {{reason}} — натисніть, щоб переглянути деталі`,tooltipUnknown:`Виявлення помилок за допомогою ШІ: очікування першого результату — натисніть, щоб переглянути деталі`,errorHint:`Цей друк не перевіряється. Виявлення відновиться автоматично після усунення проблеми, наведеної нижче.`,tooltip:`Виявлення помилок за допомогою ШІ: {{status}} (оцінка {{score}}) — натисніть, щоб переглянути деталі`,tooltipIdle:`Виявлення помилок за допомогою ШІ ввімкнено — моніторинг почнеться з наступним друком — натисніть, щоб переглянути деталі`,modalTitle:`Виявлення помилок за допомогою ШІ — {{name}}`,currentStatus:`Стан`,score:`Оцінка`,framesAnalyzed:`Проаналізовано кадрів`,idleHint:`Зараз жоден друк не відстежується. Моніторинг автоматично почнеться з наступним друком.`,lastError:`Остання помилка`,openSettings:`Відкрити налаштування`},estimatedCompletion:`Орієнтовний час виконання`,plateNumber:`Пластина {{number}}`,slotOptions:`Опції слота`,amsPopup:{friendlyName:`Назва AMS`,friendlyNamePlaceholder:`наприклад, Основна AMS`,serialNumber:`Серійний номер`,firmwareVersion:`Прошивка`,save:`Зберегти`,clear:`Очистити`,noEditPermission:`Ви не маєте дозволу на перейменування одиниць AMS.`},firmwareModal:{title:`Оновлення прошивки`,titleUpToDate:`Інформація про прошивку`,currentVersion:`Поточна:`,latestVersion:`Найновіша:`,releaseNotes:`Примітки до випуску`,checkingPrereqs:`Перевірка передумов...`,sdCardReady:`SD-картка готова. Натисніть нижче, щоб вивантажити на неї прошивку.`,uploadedSuccess:`Прошивку вивантажено на картку SD!`,applyInstructions:`Щоб застосувати оновлення до свого принтера:`,step1:`На сенсорному екрані принтера перейдіть до <strong>Налаштування</strong>`,step2:`Перейдіть до розділу <strong>Прошивка</strong>`,step3:`Виберіть <strong>Оновити з SD-картки</strong>`,step4:`Оновлення займе 10-20 хвилин`,done:`Готово`,starting:`Запуск…`,uploadFirmware:`Вивантажити прошивку`,uploadFailed:`Не вдалося почати вивантаження: {{error}}`,uploadedToast:`Прошивку вивантажено! Запустіть оновлення з екрана принтера.`,availableVersions:`Доступні версії`,usable:`Можна використовувати`,unavailable:`Недоступна`,installed:`Установлена`,newerBadge:`новіший`,olderBadge:`старіша`,currentBadge:`поточна`},accessCodePlaceholder:`Залиште порожнім, щоб не змінювати`,roi:{title:`Область виявлення (ROI)`,xStart:`Початок X`,yStart:`Початок Y`,width:`Ширина`,height:`Висота`,instruction:`Відрегулюйте область виявлення, щоб сфокусуватися на робочій пластині. Зелене поле в попередньому перегляді показує поточну область.`},developerModeWarning:`Режим розробника LAN не ввімкнено на: {{names}}. Деякі функції можуть не працювати.`,howToEnable:`Як увімкнути`,incompatibleFile:`Цей файл нарізано для {{slicedFor}}, а модель цього принтера — {{printerModel}}`,dropNotPrintable:`Можна роздрукувати лише файли .gcode і .gcode.3mf.`,dropToPrint:`Відпустіть для друку`,dropToQueue:`Відпустіть, щоб додати в чергу`},archives:{media:{title:`Відео друку`,download:`Завантажити відео друку`,searching:`Пошук відео на принтері…`,searchFailed:`Не вдалося перевірити відео на принтері.`,none:`Для цього друку не знайдено таймлапсів або фрагментів IP-камери.`,attachedTimelapse:`Прикріплений таймлапс`,printerFiles:`Файли, що залишилися на принтері`,downloadSelected:`Завантажити вибране`,printerMissing:`Принтер більше не налаштовано`,timelapseUnavailable:`Не вдалося прочитати каталог таймлапсів`,ipcamUnavailable:`Не вдалося прочитати каталог IP-камери`},title:`Архіви друку`,no3mfBanner:{title:`Деякі нещодавні роздруківки не вдалося заархівувати з мініатюрами`,body:`Слайсер не залишив файл .gcode.3mf на SD-картці принтера, тому Bambuddy не зміг отримати мініатюру або метадані слайсера. Зазвичай це стається, коли в слайсері вимкнено параметр «Зберігати надіслані файли на зовнішньому накопичувачі» (вкладка «Пристрій» у Bambu Studio або OrcaSlicer).`,docsLink:`Переглянути крок 4 встановлення`,docsLinkInternalStorage:`Чому так стається`,titleInternalStorage:`Деякі нещодавні друки залишилися у внутрішній пам'яті принтера`,bodyInternalStorage:`Bambu Studio зберіг нарізаний файл у внутрішній пам'яті принтера, а не на картці, тож Bambuddy не мав чого читати через FTP. На серії H2, P2S та X2D кнопка «Друк» завжди робить саме так: вибір є лише в «Надіслати», і там за замовчуванням теж «Кеш». Ці друки й далі архівуються з назвою та часом, лише без мініатюри та метаданих слайсера. Щоб архіви були повними, запускайте друк із Bambuddy або нарізайте в OrcaSlicer, або в Bambu Studio скористайтеся «Надіслати» із «Зовнішнім носієм», а друк запускайте потім. Усі варіанти потребують картки або флешки в принтері.`,titleNoExternalStorage:`Деякі нещодавні друки не вдалося заархівувати — у принтері немає носія`,bodyNoExternalStorage:`Принтер не бачить ані картки, ані флешки у слоті, тож нарізаному файлу не було куди потрапити, а Bambuddy — що читати. Вставте носій, і наступний друк заархівується повністю.`,titleInternalHistory:`Деякі нещодавні друки запущено з файлу, який уже був на принтері`,bodyInternalHistory:`Ці друки йшли з власної бібліотеки принтера — повторний друк з його екрана, запуск із Handy або файл, надісланий раніше й надрукований пізніше. Bambuddy читає файли друку через FTP, а той віддає лише картку чи флешку, тоді як принтер тримає цю бібліотеку в області, куди FTP не дістає, — читати 3MF не було де. Налаштування слайсера тут нічого не змінюють: для цих друків нічого не надсилалося. Вони й далі архівуються з назвою та часом, а в «Редагувати архів» витрачений філамент можна вписати вручну. Щоб архів був повним, запускайте друк із Bambuddy або зі свого слайсера.`,titleFtpsCooloff:`Деякі нещодавні друки не вдалося заархівувати — принтер відхилив файлове з'єднання`,bodyFtpsCooloff:`Bambuddy відкрив порт передавання файлів принтера (FTPS 990), і принтер відповів чимось, що не є TLS, тож прочитати з нього нічого не вдалося. Ці друки все одно збережені в архіві з назвою та часом, лише без мініатюри й метаданих слайсера. Це не налаштування слайсера і не те, що ви змінювали: ті самі моделі та прошивки нормально працюють на інших встановленнях, а уражений принтер зазвичай згодом починає працювати сам. Після такої помилки Bambuddy призупиняє передавання до цього принтера на п'ять хвилин і повертається по файл, коли пауза завершується, тож короткий епізод виправляється сам; якщо картка й далі порожня, відмова тривала довше за повторну спробу. Що саме це спричиняє, поки невідомо. Якщо повторюється, увімкніть налагоджувальне журналювання на сторінці Система та додайте пакет підтримки до свого звіту.`,titleFtpTransferFailed:`Деякі нещодавні друки не вдалося заархівувати — передавання файлу не вклалося в час`,bodyFtpTransferFailed:`Нарізаний файл лежав на картці принтера, і принтер справді його віддавав, але передавання не завершилося у відведений час. На старті друку принтер одночасно обслуговує камеру, повідомлення про стан і завантаження завдання, і великий 3MF не завжди встигає пройти на цьому тлі. Ці друки й далі заархівовані з назвою та часом, лише без мініатюри та даних слайсера. Це не налаштування слайсера і не наслідок ваших змін. Bambuddy повертається по файл ще тричі протягом наступних десяти хвилин, тож більшість таких випадків закриваються самі; якщо картка так і лишилася порожньою, то й усі ці спроби не вклалися в час. Якщо це повторюється, збільште Тайм-аут підключення в розділі Налаштування > Мережа > Повтор FTP.`,dismissLabel:`Відхилити це повідомлення`},searchPlaceholder:`Пошук в архівах...`,filterByPrinter:`Фільтрувати за принтером`,filterByStatus:`Фільтрувати за статусом`,sortBy:`Сортувати за`,sortNewest:`Спочатку найновіші`,sortOldest:`Спочатку найстаріші`,sortName:`Назва`,sortDuration:`Тривалість`,sortLargest:`Спочатку найбільші`,sortSmallest:`Спочатку найменші`,sortSize:`Розмір`,noArchives:`Архіви не знайдено`,noArchivesSearch:`Жоден архів не відповідає вашому пошуку`,originalPrintNotVisible:`Оригінальний друк не відображається — спробуйте очистити фільтри`,noArchivesYet:`Архівів ще немає`,prints:`друків`,pagination:{showing:`Показано`,to:`до`,of:`з`,show:`Показати`,page:`Сторінка`,all:`Усі`},loadingArchives:`Завантаження архівів...`,releaseToUpload:`Відпустіть, щоб вивантажити`,showAll:`Показати все`,showFavoritesOnly:`Показати лише вибране`,gridView:`Вигляд сітки`,listView:`Перегляд списку`,calendarView:`Перегляд календаря`,logView:`Журнал друку`,manageTags:`Керування тегами`,showFailedPrints:`Показати невдалі друки`,hideFailedPrints:`Приховати невдалі друки`,hideDuplicates:`Приховати дублікати`,viewOriginalPrint:`Клацніть, щоб переглянути оригінальний друк (#{{id}})`,printTime:`Час друку`,filamentUsed:`Використано філаменту`,cost:`Вартість`,preview:`Попередній перегляд`,deleteArchive:`Видалити архів`,deleteConfirm:`Ви впевнені, що хочете видалити цей архів?`,favorite:`В обраному`,unfavorite:`Видалити з вибраного`,viewDetails:`Переглянути деталі`,status:{completed:`Завершено`,failed:`Невдало`,stopped:`Зупинено`},toast:{source3mfAttached:`Вихідний файл 3MF долучено: {{filename}}`,failedUploadSource3mf:`Не вдалося вивантажити вихідний файл 3MF`,source3mfRemoved:`Вихідний файл 3MF видалено`,failedRemoveSource3mf:`Не вдалося видалити вихідний файл 3MF`,f3dAttached:`F3D долучено: {{filename}}`,failedUploadF3d:`Не вдалося вивантажити F3D`,f3dRemoved:`F3D видалено`,failedRemoveF3d:`Не вдалося видалити F3D`,timelapseAttached:`Додано покадрову зйомку: {{filename}}`,timelapseAlreadyAttached:`Таймлапс уже долучено`,noMatchingTimelapse:`Відповідного таймлапсу не знайдено`,failedScanTimelapse:`Не вдалося відсканувати покадрову зйомку`,failedAttachTimelapse:`Не вдалося долучити таймлапс`,timelapseRemoved:`Таймлапс видалено`,failedRemoveTimelapse:`Не вдалося видалити таймлапс`,timelapseUploaded:`Таймлапс вивантажено: {{filename}}`,failedUploadTimelapse:`Не вдалося вивантажити таймлапс`,archiveDeleted:`Архів видалено`,failedDeleteArchive:`Не вдалося видалити архів`,addedToFavorites:`Додано до обраних`,removedFromFavorites:`Видалено з вибраного`,projectUpdated:`Проєкт оновлений`,failedUpdateProject:`Не вдалося оновити проєкт`,linkCopied:`Посилання скопійовано в буфер обміну`,failedCopyLink:`Не вдалося скопіювати посилання`,photoDeleted:`Фото видалено`,failedDeletePhoto:`Не вдалося видалити фото`,failedDeleteArchives:`Не вдалося видалити архіви`,failedUpdateFavorites:`Не вдалося оновити вибране`,exportDownloaded:`Експорт завантажено`,exportFailed:`Помилка експорту`},menu:{print:`Друкувати`,openInBambuStudio:`Відкрити у слайсері`,slice:`Нарізати`,externalLink:`Зовнішнє посилання`,viewOnMakerWorld:`Переглянути на MakerWorld`,preview3d:`3D попередній перегляд`,viewTimelapse:`Переглянути таймлапс`,scanForTimelapse:`Знайти таймлапс`,uploadTimelapse:`Вивантажити таймлапс`,removeTimelapse:`Видалити таймлапс`,downloadSource3mf:`Завантажити вихідний файл 3MF`,uploadSource3mf:`Вивантажити вихідний файл 3MF`,replaceSource3mf:`Замінити вихідний файл 3MF`,removeSource3mf:`Видалити вихідний файл 3MF`,uploadF3d:`Вивантажити F3D`,replaceF3d:`Замінити F3D`,downloadF3d:`Завантажити F3D`,removeF3d:`Видалити F3D`,download:`Завантажити`,copyDownloadLink:`Копіювати посилання для завантаження`,qrCode:`QR-код`,viewPhotos:`Переглянути фото`,viewPhotosCount:`Переглянути фото ({{count}})`,projectPage:`Сторінка проєкту`,addToFavorites:`Додати в обране`,removeFromFavorites:`Видалити з вибраного`,edit:`Редагувати`,printLog:`Журнал друку`,goToProject:`Перейти до проєкту: {{name}}`,addToProject:`Додати до проєкту`,removeFromProject:`Видалити з проєкту`,loading:`Завантаження...`,noProjectsAvailable:`Немає доступних проєктів`,searchProjects:`Пошук проєктів…`,select:`Вибрати`,deselect:`Зняти вибір`,delete:`Видалити`},permission:{noReprint:`Ви не маєте дозволу на повторний друк цього архіву`,noAddToQueue:`Ви не маєте дозволу на додавання в чергу`,noUpdateArchives:`Ви не маєте дозволу на оновлення архівів`,noUploadFiles:`Ви не маєте дозволу на вивантаження файлів`,noDownload:`У вас немає дозволу на завантаження архівів`,noCopyLink:`Ви не маєте дозволу копіювати посилання для завантаження`,noDelete:`Ви не маєте дозволу на видалення цього архіву`,noEdit:`Ви не маєте дозволу редагувати цей запис`,noCreate:`Ви не маєте дозволу на створення архівів`},platePicker:{title:`Вибрати пластину для попереднього перегляду`,hint:`Цей архів містить кілька пластин. Виберіть одну, щоб відкрити її в переглядачі G-коду.`,plateLabel:`Пластина {{index}}`,objectCount:`Об’єктів: {{count}}`,objectCount_plural:`Об’єктів: {{count}}`,noGcode:`Цей архів не містить нарізаного G-коду для перегляду. Спочатку відкрийте його в Bambu Studio та виконайте нарізання.`},card:{previousPlate:`Попередня друкарська пластина`,nextPlate:`Наступна пластина`,plateNumber:`Пластина {{index}}`,moreOptions:`Клацніть правою кнопкою миші, щоб отримати додаткові параметри`,addToFavorites:`Додати в обране`,removeFromFavorites:`Видалити з вибраного`,cancelled:`скасовано`,failed:`не вдалося`,duplicate:`дублікат`,duplicateTitle:`Ця модель була надрукована раніше`,openSource3mf:`Відкрити вихідний файл 3MF у Bambu Studio (клацніть правою кнопкою, щоб переглянути додаткові дії)`,downloadF3d:`Завантажити файл дизайну Fusion 360`,viewTimelapse:`Переглянути сповільнену зйомку`,viewPhoto:`Переглянути 1 фото`,viewPhotos:`Переглянути фото: {{count}}`,openFolder:`Відкрити папку: {{name}}`,slicedFile:`Нарізаний файл - готовий до друку`,sourceFile:`Лише вихідний файл – зіставлення AMS недоступне`,gcode:`G-КОД`,source:`ДЖЕРЕЛО`,project:`Проєкт: {{name}}`,runsBadge:`Друків: {{count}}`,runsBadgeTitle:`Усього друків: {{count}} — успішних: {{successful}}, невдалих: {{failed}}. Натисніть, щоб переглянути повний журнал друку.`,estimated:`Приблизно: {{time}}`,actual:`Фактично: {{time}}`,accuracy:`Точність: {{percent}}%`,filament:`{{weight}} г`,layer:`{{count}} шар`,layers:`Шарів: {{count}}`,object:`{{count}} об’єкт`,objects:`Об’єктів: {{count}}`,slicedFor:`Нарізаний для {{model}}`,uploadedBy:`Вивантажив`,noPermissionReprint:`Ви не маєте дозволу на передрук`,noFileForReprint:`Файл 3MF недоступний: його не вдалося завантажити з принтера під час збереження запису про друк`,slicerAmsMapping:`Зіставлення AMS збережено ({{printer}})`,slicerAmsMappingTooltip:`Вибір слотів AMS, зроблений слайсером, збережено для принтера {{printer}}. Номери слотів мають сенс лише на ньому, тож повторний друк використає їх, тільки якщо знову спрямований на {{printer}}.`,noPermissionEdit:`Ви не маєте прав на редагування архівів`,noPermissionDelete:`Ви не маєте дозволу на видалення архівів`,openInBambuStudio:`Відкрити у слайсері`,openInBambuStudioToSlice:`Відкрити у слайсері для нарізання`,slice:`Нарізати`,externalLink:`Зовнішнє посилання`,makerWorld:`MakerWorld: {{designer}}`,viewProject:`Переглянути проєкт`,noExternalLink:`Немає зовнішнього посилання`,preview3d:`3D попередній перегляд`,download:`Завантажити`,edit:`Редагувати`,delete:`Видалити`},runLog:{title:`Журнал друку`,modalTitle:`Журнал друку — {{name}}`,modalTitleFallback:`цей архів`,empty:`Для цього архіву ще не зареєстровано жодної події друку.`,col:{date:`Дата`,status:`Статус`,duration:`Тривалість`,filament:`Філамент`,cost:`Вартість`},status:{completed:`Виконано`,failed:`Не вдалося`,cancelled:`Скасовано`,stopped:`Зупинено`,skipped:`Пропущено`,printing:`Друк`}},modal:{deleteArchive:`Видалити архів`,deleteConfirm:`Ви впевнені, що хочете видалити "{{name}}"? Цю дію не можна скасувати.`,deleteButton:`Видалити`,deletePurgeStats:`Також видалити цей друк із швидкої статистики (філамент, час, вартість, енергія)`,deleteQueueItemsWarning:`Елементи черги {{count}}, пов’язані з цим архівом, також буде видалено.`,deleteBlockedByPrinting:`Неможливо видалити — наразі друкуються елементи черги {{count}}. Спочатку зупиніть друк, а потім повторіть спробу.`,removeSource3mf:`Видалити джерело 3MF`,removeSource3mfConfirm:`Ви впевнені, що хочете видалити вихідний файл 3MF з "{{name}}"? Це призведе до видалення вихідного файлу проєкту слайсера.`,removeButton:`Видалити`,removeF3d:`Видалити F3D`,removeF3dConfirm:`Ви впевнені, що хочете видалити файл дизайну Fusion 360 із "{{name}}"?`,removeTimelapse:`Видалити Timelapse`,removeTimelapseConfirm:`Ви впевнені, що хочете видалити покадрове відео з "{{name}}"?`,timelapse:`{{name}} — таймлапс`,selectTimelapse:`Вибрати таймлапс`,selectTimelapseDesc:`Автоматичний збіг не знайдено. Виберіть покадрову зйомку для цього друку:`,deleteArchives:`Видалити архіви`,deleteArchivesConfirm:`Видалити вибрані архіви ({{count}})? Цю дію неможливо скасувати.`,deleteCount:`Видалити {{count}}`},page:{title:`Архіви`,printsCount:`Показано друків: {{filtered}} із {{total}}`,dropFilesHere:`Перетягніть файли .3mf сюди`,releaseToUpload:`Відпустіть, щоб вивантажити`,only3mfSupported:`Підтримуються лише файли .3mf.`,close:`Закрити`,selected:`Вибрано {{count}}.`,selectAll:`Вибрати усі`,tags:`Теги`,project:`Проєкт`,favorite:`В обраному`,delete:`Видалити`,toggledFavorites:`Оновлено вибране для архівів: {{count}}`,failedUpdateFavorites:`Не вдалося оновити вибране`,archivesDeleted:`Видалено архівів: {{count}}`,failedDeleteArchives:`Не вдалося видалити архіви`,photoDeleted:`Фото видалено`,failedDeletePhoto:`Не вдалося видалити фото`},list:{name:`Назва`,printer:`Принтер`,date:`Дата`,size:`Розмір`,actions:`Дії`,hasTimelapse:`Має таймлапс`},log:{date:`Дата`,printName:`Назва друку`,printer:`Принтер`,user:`Користувач`,status:`Статус`,duration:`Тривалість`,filament:`Філамент`,filamentUsed:`Витрачено філаменту`,cost:`Вартість`,energy:`Енергія`,energyCost:`Вартість енергії`,completedAt:`Завершено`,columns:`Стовпці`,sortBy:`Сортувати за: {{column}}`,allPrinters:`Усі принтери`,allUsers:`Усі користувачі`,allStatuses:`Усі статуси`,cancelled:`Скасовано`,skipped:`Пропущено`,dateFrom:`Від`,dateTo:`До`,noEntries:`Записів журналу друку не знайдено`,showing:`Показано {{count}} з {{total}} записів`,rowsPerPage:`Рядків`,page:`Сторінка`,prev:`Назад`,next:`Далі`,clearLog:`Очистити журнал`,clearLogTitle:`Очистити журнал друку`,clearLogConfirm:`Усі записи журналу друку буде остаточно видалено. Архіви та елементи черги залишаться без змін. Цю дію неможливо скасувати. Продовжити?`,clearLogButton:`Очистити все`,cleared:`Очищено записів журналу: {{count}}`,clearFailed:`Не вдалося очистити журнал друку`,deleteEntryTitle:`Видалити запис журналу друку`,deleteEntryConfirm:`Запис буде видалено з журналу, а пов’язані з ним філамент, час і вартість більше не враховуватимуться у швидкій статистиці. Відповідний архів, якщо він є, залишиться без змін. Цю дію неможливо скасувати.`,entryDeleted:`Запис журналу друку видалено`,entryDeleteFailed:`Не вдалося видалити запис журналу друку`,editEntryTitle:`Редагувати запис журналу друку`,editEntryDescription:`Класифікуйте цей запуск друку. Віджет «Аналіз невдач» групує дані за цими значеннями, тому зміни одразу відобразяться у статистиці.`,entryUpdated:`Запис журналу друку оновлено`,entryUpdateFailed:`Не вдалося оновити запис журналу друку`,statuses:{completed:`Виконано`,failed:`Не вдалося`,stopped:`Зупинено`,cancelled:`Скасовано`,skipped:`Пропущено`}}},dispatchToast:{untitled:`Завдання друку`,startingPrints:`Початок друку`,progressSummary:`{{complete}}/{{total}} завершено • Обробка: {{processing}}`,expandDetails:`Розгорнути подробиці надсилання`,collapseDetails:`Згорнути відомості про відправлення`,awaitingPrinter:`Очікування принтера…`,status:{processing:`Обробка`,completed:`Виконано`,failed:`Не вдалося`},failed:{generic:`Не вдалося відправити`,upload_failed:`Не вдалося вивантажити файл на принтер`,start_command_failed:`Принтер відхилив команду запуску`},dismiss:`Відхилити`},pipelineRuns:{title:`Запуски конвеєрів`,loading:`Завантаження…`,empty:`Запусків конвеєрів ще немає.`,filter:{pipeline:`Конвеєр`,status:`Статус`,target:`Ціль`,all:`Усі`,allPipelines:`Усі конвеєри`,allStatus:`Усі статуси`,allTargets:`Усі цілі`,clear:`Очистити фільтри`,noMatches:`Жоден запуск не відповідає поточним фільтрам.`},totalCount_one:`{{n}} запуск`,totalCount_other:`Запусків: {{n}}`,copies:`Копій: {{n}}`,failedCount:`Невдалих: {{n}}`,copyN:`Копія {{n}}`,retryFailed:`Повторити невдалі`,retryOf:`повтор запуску №{{n}}`,pagination:`{{start}}–{{end}} з {{total}}`,cancelledByUser:`Скасовано користувачем`,toast:{cancelled:`Запуск скасовано`,cancelFailed:`Не вдалося скасувати`,retryStarted:`Розпочато повторну спробу`,retryFailed:`Не вдалося розпочати повторну спробу`,cleared:`Видалено запусків: {{n}}`,clearFailed:`Не вдалося очистити`},clearLog:`Очистити журнал`,clearConfirmTitle:`Очистити журнал?`,clearConfirmBody:`Видалити всі завершені, невдалі, скасовані та частково невдалі запуски конвеєрів? Активні запуски буде збережено. Цю дію неможливо скасувати.`,clearConfirmAction:`Очистити`,jobStatus:{pending:`в очікуванні`,awaiting_printer:`в очікуванні принтера`,queued:`в черзі`,printing:`друк`,completed:`завершено`,failed:`не вдалося`,cancelled:`скасовано`}},queue:{title:`Черга друку`,subtitle:`Плануйте завдання друку та керуйте ними`,filamentShort:{rowBadge:`Недостатньо філаменту для призначеної котушки`,rowTooltip:`Планувальник відправлення позначив цей елемент. Натисніть «Запустити», щоб переглянути нестачу для кожного слота й вирішити, чи друкувати попри неї.`,confirmTitle:`Недостатня кількість філаменту`,confirmIntro:`На призначеній котушці недостатньо філаменту принаймні для одного слота. Усе одно друкувати?`,lineItem:`Слот {{slot}}: потрібно {{required}} г, {{remaining}} г залишилося`,unknown:`невідомо`,printAnyway:`Усе одно друкувати`},slicerAmsMapping:{rowBadge:`Слоти AMS збережено для цього принтера`,rowTooltip:`Цей запис містить точні слоти AMS, вибрані слайсером, збережені для принтера, на який націлено це завдання. Повторний друк на ньому може використати ті самі котушки замість повторного добору за типом і кольором.`},editQueueItem:`Редагувати елемент черги`,selectAllPlates:`Вибрати всі пластини ({{count}})`,deselectAll:`Зняти вибір із усіх`,printQueued:`Друк у черзі`,printQueuedWillStartWhenIdle:`Розпочнеться, коли принтер звільниться`,itemsQueued:`Додано до черги: {{count}}`,sending:`Надсилання...`,sendingProgress:`Надсилання {{current}}/{{total}}...`,adding:`Додавання...`,addingProgress:`Додавання {{current}}/{{total}}...`,savingProgress:`Збереження {{current}}/{{total}}...`,clearQueue:`Очистити чергу`,clearHistory:`Очистити історію`,emptyQueue:`Черга порожня`,position:`Позиція`,scheduledTime:`Запланований час`,moveUp:`Перемістити вгору`,moveDown:`Перемістити вниз`,startNow:`Почати зараз`,printingInProgress:`Виконується друк...`,viewArchive:`Переглянути архів`,viewInFileManager:`Переглянути в менеджері файлів`,itemCount:`Елементів: {{count}}`,itemCount_plural:`Елементів: {{count}}`,dragToReorder:`Перетягніть, щоб змінити порядок (лише для завдань «Якнайшвидше»)`,reorderHint:`Позиція впливає лише на завдання «Якнайшвидше». Заплановані завдання запускаються у встановлений час.`,sjf:{label:`SJF`,tooltip:`SJF (спочатку найкоротше завдання) — планувальник надає пріоритет коротшим завданням друку`},addedBy:`Додав {{name}}`,nextInQueue:`Наступний у черзі`,clearPlateSuccess:`Пластина очищена — готова до наступного друку`,plateNumber:`Пластина {{index}}`,quantity:`Кількість`,quantityHint:`Буде створено елементів черги: {{count}}`,plateQuantityLabel:`Повтори: {{plate}}`,plateQuantityTotal_one:`Усього запусків: {{count}}`,plateQuantityTotal_other:`Усього запусків: {{count}}`,batchOrders:{title:`Пакетні замовлення`,emptyTitle:`Пакетних замовлень немає`,emptyDescription:`Поставте в чергу файл із кількома столами або кілька копій одного стола — замовлення з’явиться тут разом із прогресом.`,filter:{active:`Активні`,completed:`Завершені`,cancelled:`Скасовані`,all:`Усі`},status:{active:`Активне`,completed:`Завершене`,cancelled:`Скасоване`},noTargets:`Лише групування`,noTargetsHint:`Створено до появи цільових кількостей на стіл, тож відстежує поставлені в чергу запуски, а не ціль.`,dispatchRemaining:`Поставити в чергу: {{count}}`,dispatchPlate:`Поставити решту`,strandedPlate:`Немає запуску для копіювання налаштувань`,strandedNotice:`Не вдається поставити в чергу {{runs}} із {{owed}} ще не виконаних запусків: для цієї пластини не залишилося запуску в черзі чи завершеного, з якого можна скопіювати налаштування. Поставте пластину в чергу один раз із файлу або скасуйте замовлення.`,dispatched:`Решту запусків для «{{name}}» поставлено в чергу`,plateProgress:`Готово {{completed}} з {{target}}`,remaining:`Залишилось: {{count}}`,failed:`Невдалих: {{count}}`,printing:`Друкується: {{count}}`,wholeFile:`Увесь файл`,due:`Термін: {{date}}`,costSoFar:`{{amount}} витрачено`,costRemaining:`(ще {{amount}})`},activeBatches:`Активні партії`,batchProgress:`{{completed}} з {{total}} завершено`,cancelBatch:`Скасувати решту`,batchCancelled:`Решту елементів партії скасовано`,cancelBatchConfirmTitle:`Скасувати партію`,cancelBatchConfirmMessage:`Закрити це замовлення? Запуски, що ще стоять у черзі, буде скасовано, і замовлення перестане вимагати те, чого не виготовило.`,batch:{defaultName:`Партія`,label:`Елементів: {{count}}`,label_plural:`Елементів: {{count}}`,pendingCount:`Очікують: {{count}}`,pendingCount_plural:`Очікують: {{count}}`,expand:`Розгорнути партію`,collapse:`Згорнути партію`,groupAsBatch:`Згрупувати в партію…`,groupAsBatchDescription:`Об’єднати вибрані елементи ({{count}}) в одну згортану партію.`,nameLabel:`Назва партії`,namePlaceholder:`напр. П’ятничні подарунки`,create:`Створити партію`,ungroup:`Розгрупувати`,ungroupConfirmTitle:`Розгрупувати партію?`,ungroupConfirmMessage:`Елементи залишатимуться в черзі, але більше не групуватимуться разом.`,dragGroup:`Перетягнути групу`},tabs:{batches:`Партії`,queue:`Черга`,history:`Історія`,timeline:`Хронологія`,pipelines:`Запуски конвеєрів`},layout:{flatList:`Список`,byPrinter:`За принтером`,groupByPrinter:`Групувати за принтером`},history:{emptyTitle:`Історії ще немає`,emptyDescription:`Тут відображатимуться завершені, скасовані та невдалі роздруківки.`,showMore:`Показати більше`,showingCount:`Показано {{shown}} з {{total}}`},dragGhost:{multiCount:`Елементів: {{count}}`,batch:`{{name}} (копія {{count}})`,batch_plural:`{{name}} ({{count}} копій)`},sections:{currentlyPrinting:`Наразі друкується`,queued:`У черзі`,history:`Історія`},status:{pending:`В очікуванні`,waiting:`Очікування`,printing:`Друк`,paused:`Призупинено`,completed:`Виконано`,failed:`Не вдалося`,skipped:`Пропущено`,cancelled:`Скасовано`},summary:{printing:`Друк`,queued:`У черзі`,totalTime:`Загальний час у черзі`,totalWeight:`Загальна вага черги`,history:`Історія`},filter:{allPrinters:`Усі принтери`,unassigned:`Не призначено`,allStatus:`Усі статуси`,allLocations:`Усі розташування`,any:`Будь-який`},sort:{byPosition:`Сортувати за позицією`,byName:`Сортувати за назвою`,byPrinter:`Сортувати за принтером`,bySchedule:`Сортувати за розкладом`,byDate:`Сортувати за датою`,ascendingOldest:`За зростанням (найстаріші спочатку)`,descendingNewest:`За спаданням (спочатку найновіші)`},badges:{staged:`Очікує ручного запуску`,requiresPrevious:`Потрібне успішне завершення попереднього завдання`,autoPowerOff:`Автоматичне вимкнення`,gcodeInjection:`G-код`},empty:{title:`Друк не заплановано`,description:`Заплануйте друк зі сторінки «Архіви» за допомогою параметра «Розклад» у контекстному меню або перетягніть файли, щоб почати.`},time:{etaIfStartedNow:`Час завершення, якщо запустити це завдання зараз`,whenFree:`Коли принтер звільниться`,overdue:`Прострочено`,now:`Зараз`,lessThanMinute:`Менше ніж за хвилину`,inMinutes:`Через {{count}} хв`,inHours:`Через {{count}} год`},actions:{startPrint:`Розпочати друк`,stopPrint:`Зупинити друк`,requeue:`Поставити в чергу знову`},bulkEdit:{title:`Редагувати {{count}} елемент`,title_plural:`Редагувати елементи ({{count}})`,description:`Лише змінені параметри будуть застосовані до вибраних елементів.`,printer:`Принтер`,noChange:`— Без змін —`,queueOptions:`Параметри черги`,staged:`Очікує ручного запуску`,autoPowerOff:`Автоматичне вимкнення після друку`,requirePrevious:`Вимагати успішного завершення попереднього завдання`,gcodeInjection:`Вставляти G-код`,printOptions:`Параметри друку`,bedLevelling:`Вирівнювання столу`,flowCalibration:`Калібрування потоку`,vibrationCalibration:`Калібрування вібрації`,layerInspection:`Перевірка першого шару`,timelapse:`Таймлапс`,useAms:`Використовувати AMS`,nozzleOffsetCali:`Калібрування зсуву сопла`,applyChanges:`Застосувати зміни`,selectAll:`Вибрати усі`,deselectAll:`Зняти вибір із усіх`,selected:`Вибрано: {{count}}`,editSelected:`Редагувати вибране`,cancelSelected:`Скасувати вибране`},confirm:{cancelTitle:`Скасувати запланований друк`,cancelMessage:`Ви впевнені, що бажаєте скасувати "{{name}}"?`,stopTitle:`Зупинити друк`,stopMessage:`Ви впевнені, що бажаєте зупинити поточний друк "{{name}}"? Це призведе до скасування завдання друку на принтері.`,removeTitle:`Видалити з історії`,removeMessage:`Ви впевнені, що бажаєте видалити "{{name}}" з історії черги?`,clearHistoryTitle:`Очистити історію`,clearHistoryMessage:`Видалити всі елементи з історії ({{count}})?`,cancelButton:`Скасувати друк`,stopButton:`Зупинити друк`,thisPrint:`цей друк`,thisItem:`цей елемент`},toast:{cancelled:`Пункт черги скасовано`,cancelFailed:`Не вдалося скасувати елемент`,removed:`Елемент черги видалено`,keptForOrder:`Скасовано, а не видалено: лише з цього запуску замовлення може знову поставити цю пластину в чергу`,historyKeptForOrders:`Збережено {{kept}}, які ще потрібні замовленням.`,removeFailed:`Не вдалося видалити елемент`,stopped:`Друк зупинено`,stopFailed:`Не вдалося зупинити друк`,released:`Друк відправлено в чергу`,startFailed:`Не вдалося почати друк`,reorderFailed:`Не вдалося змінити порядок черги`,historyCleared:`Очищено елементів історії: {{count}}`,clearHistoryFailed:`Не вдалося очистити історію`,updateFailed:`Не вдалося оновити елементи`,bulkCancelled:`Скасовано елементів: {{count}}`,bulkCancelFailed:`Не вдалося скасувати елементи`,batchCreated:`Партію «{{name}}» створено`,batchCreateFailed:`Не вдалося створити партію`,batchUngrouped:`Розгруповано елементів: {{count}}`,batchUngroupFailed:`Не вдалося розгрупувати партію`,resumedAfterFailure:`Відновлено чергу — {{restored}} завдання відновлено до стану очікування`,resumeAfterFailureFailed:`Не вдалося відновити чергу`},resumeAfterFailure:{banner:`{{printer}} заблоковано через помилку попереднього друку — завдання {{count}} пропущено`,bannerHint:`Усуньте проблему з принтером, а потім відновіть чергу, щоб повернути пропущені завдання й зняти блокування.`,button:`Відновити після невдачі`,confirmTitle:`Відновити чергу після помилки?`,confirmMessage:`Повернути пропущені завдання ({{count}}) для {{printer}} до стану очікування та зняти блокування після невдалого попереднього друку? Переконайтеся, що принтер готовий.`},timeline:{listView:`Список`,timelineView:`Хронологія`,unassigned:`Не призначено`,noData:`На цей день немає запланованих роздруківок`,nothingCommitted:`У цьому часовому проміжку немає підтверджених розкладів. Завдання з ручним запуском, завдання в очікуванні та завдання «Якнайшвидше» для вільних принтерів тут не показано. Установіть запланований час або запустіть відкладене завдання.`,allDoneBy:`Орієнтовне завершення всіх друків: {{time}}`,staged:`Очікує ручного запуску`,filterAll:`Показати все`,filterPrinting:`Друк`,filterQueued:`У черзі`,time:{anyMoment:`будь-якої миті`,minutesLeft:`Залишилося {{minutes}} хв`,hoursLeft:`Залишилося {{hours}} год`,hoursMinutesLeft:`Залишилося {{hours}} год {{minutes}} хв`},day:{previous:`Попередній день`,next:`Наступний день`,today:`Сьогодні`},window:{back12h:`Назад 12 годин`,forward12h:`Уперед на 12 годин`,now:`Зараз`},printerColumnHeader:`Принтер`},permissions:{noStopPrint:`Ви не маєте дозволу зупиняти друк`,noStartPrint:`Ви не маєте дозволу розпочинати друк`,noEdit:`Ви не маєте дозволу редагувати цей елемент черги`,noCancel:`Ви не маєте дозволу скасувати цей елемент черги`,noRequeue:`Ви не маєте дозволу повторно ставити елементи в чергу`,noRemove:`Ви не маєте дозволу на видалення цього елемента черги`,noClearHistory:`Ви не маєте дозволу очистити всю історію`,noEditItems:`Ви не маєте дозволу редагувати елементи черги`,noCancelItems:`Ви не маєте дозволу на скасування елементів черги`}},stats:{title:`Статистика`,subtitle:`Перетягніть віджети, щоб змінити порядок. Натисніть значок ока, щоб приховати.`,overview:`Огляд`,totalPrints:`Загальна кількість друків`,successRate:`Коефіцієнт успішності`,totalPrintTime:`Загальний час друку`,printTime:`Час друку`,totalFilament:`Загальна кількість використаного філаменту`,filamentUsed:`Використано філаменту`,filamentCost:`Вартість філаменту`,totalCost:`Загальна вартість`,energyUsed:`Використана енергія`,energyCost:`Вартість енергії`,energyWarmingUpTooltip:`Відстеження енергії все ще збирає щогодинні знімки. Підсумкові показники за діапазон дат стануть точними, коли існує принаймні один знімок до вибраного діапазону. Ранні значення можуть бути заниженими.`,averagePrintTime:`Середній час друку`,printsPerDay:`Друків на день`,byPrinter:`За принтером`,printsByPrinter:`Друки за принтерами`,byMaterial:`За матеріалом`,byMonth:`За місяцями`,last7Days:`Останні 7 днів`,last30Days:`Останні 30 днів`,last90Days:`Останні 90 днів`,allTime:`За весь час`,quickStats:`Швидка статистика`,printActivity:`Активність друку`,filamentTypes:`Типи філаментів`,filamentTrends:`Тенденції філаменту`,failureAnalysis:`Аналіз невдач`,timeAccuracy:`Точність оцінки часу`,successful:`Успішно:`,failed:`Невдало:`,cancelled:`Скасовано:`,perfectEstimate:`100% = ідеальна оцінка`,noTimeAccuracyData:`Даних про точність часу ще немає`,noFilamentData:`Немає даних про філамент`,noPrinterData:`Дані принтера відсутні`,noPrintData:`Немає даних про друк`,noPrintDataLast30Days:`Немає даних про друк за останні 30 днів`,failureReasons:`Причини невдач`,topFailureReasons:`Основні причини невдач`,failedPrintsCount:`Невдалих друків: {{failed}} із {{total}}`,lastWeekRate:`Минулого тижня: {{rate}}%`,resetLayout:`Скинути макет`,recalculateCosts:`Перерахувати витрати`,recalculateCostsHint:`Перерахувати вартість усіх архівних друків за поточними цінами на філамент`,exportStats:`Експортувати статистику`,exportAsCsv:`Експортувати як CSV`,exportAsExcel:`Експортувати як Excel`,hiddenCount:`Приховано: {{count}}`,exportDownloaded:`Експорт завантажено`,exportFailed:`Помилка експорту`,layoutReset:`Розташування віджетів скинуто`,recalculatedCosts:`Перераховано вартість архівів: {{count}}`,recalculateFailed:`Не вдалося перерахувати витрати`,loadingStats:`Завантаження статистики...`,noPermissionResetLayout:`Ви не маєте дозволу на скидання макета`,noPermissionRecalculate:`Ви не маєте дозволу на перерахунок витрат`,noPrintDataInRange:`У вибраному діапазоні немає даних про друк`,periodFilament:`Філамент за період`,periodCost:`Вартість періоду`,avgPerPrint:`Середнє на друк`,usageOverTime:`Використання в часі`,energyOverTime:`Споживання енергії в часі`,filamentByWeight:`Вага`,printDuration:`Тривалість друку`,printerUtilization:`Використання принтера`,filamentSuccess:`Успіх за матеріалом`,printHabits:`Звички друку`,printTimeOfDay:`Розподіл друків за часом доби`,colorDistribution:`Розподіл кольору`,noColorData:`Немає даних про колір`,records:`Записи`,longestPrint:`Найтриваліший друк`,heaviestPrint:`Найважчий друк`,mostExpensivePrint:`Найдорожчий`,busiestDay:`Найзавантаженіший день`,successStreak:`Серія успішних друків`,streakPrint:`успішний друк поспіль`,streakPrints:`Успішних друків поспіль: {{count}}`,printerStats:`Статистика принтера`,hours:`год`,avgPrints:`Середня кількість друків`,noArchiveData:`Немає даних про друк`,filamentByTime:`Час`,avgWeight:`Середня вага`,avgTime:`Середній час`,filamentByPrints:`Друки`,timeframe:{today:`Сьогодні`,"this-week":`Цей тиждень`,"this-month":`Цей місяць`,"last-7":`Останні 7 днів`,"last-30":`Останні 30 днів`,"last-90":`Останні 90 днів`,"this-year":`Цього року`,"all-time":`За весь час`,custom:`Власний діапазон`,from:`Від`,to:`До`},allUsers:`Усі користувачі`,noUser:`Немає користувача (система)`,filterByUser:`Фільтрувати за користувачем`},maintenance:{title:`Технічне обслуговування`,overview:`Огляд`,allOk:`Усі роботи з технічного обслуговування виконано`,dueCount:`Потрібне обслуговування: {{count}}`,dueCount_plural:`Потрібне обслуговування: {{count}}`,warningCount:`{{count}} попередження`,warningCount_plural:`{{count}} попередження`,totalPrintTime:`Загальний час друку`,nextMaintenance:`Наступне технічне обслуговування`,nothingDue:`Обслуговування не потрібне`,tasks:`Завдання`,lastPerformed:`Востаннє виконано`,interval:`Інтервал`,hoursRemaining:`Залишилося {{hours}} год`,hoursOverdue:`Прострочено на {{hours}} год`,markDone:`Позначити як виконане`,performMaintenance:`Виконати технічне обслуговування`,history:`Історія`,noHistory:`Історії обслуговування немає`,editPrintHours:`Змінити години друку`,currentHours:`Поточна кількість годин`,statusTab:`Статус`,settingsTab:`Налаштування`,overdueCount:`{{count}} прострочено`,dueSoonCount:`{{count}} незабаром`,dueSoon:`Незабаром`,allGood:`Все добре`,overdueBy:`Прострочено на {{duration}}`,dueIn:`Через {{duration}}`,timeLeft:`Залишилося {{duration}}`,day:`1 день`,days:`{{count}} днів`,week:`1 тиждень`,weeks:`{{count}} тижнів`,month:`1 місяць`,months:`{{count}} місяців`,year:`1 рік`,maintenanceTypes:`Види технічного обслуговування`,maintenanceTypesDescription:`Системні та власні завдання технічного обслуговування`,addCustomType:`Додати спеціальний тип`,restoreDefaults:`Відновити завдання за замовчуванням`,intervalType:`Тип інтервалу`,intervalValue:`Інтервал ({{type}})`,icon:`значок`,documentationLink:`Посилання на документацію (необов’язково)`,assignToPrinters:`Призначити принтерам`,selectAtLeastOnePrinter:`Вибрати принаймні один принтер`,addType:`Додати тип`,custom:`Власне`,printHours:`Години друку`,calendarDays:`Календарні дні`,exampleName:`наприклад, Замінити HEPA-фільтр`,viewDocumentation:`Переглянути документацію`,timeBasedInterval:`Часовий інтервал`,intervalOverrides:`Перевизначення інтервалів`,intervalOverridesDescription:`Налаштувати інтервали для конкретних принтерів`,assignedToPrinters:`Призначено для принтерів:`,noPrintersAssigned:`Принтерів не призначено`,addPrinterShort:`Додати:`,printersAssignedClick:`Призначено принтерів: {{count}} — натисніть, щоб керувати`,removeFromPrinter:`Видалити з цього принтера`,types:{lubricateCarbonRods:`Змастити карбонові стрижні`,lubricateRails:`Змастити лінійні напрямні`,cleanNozzle:`Очистити сопло/хотенд`,checkBelts:`Перевірити натяг ременів`,cleanBuildPlate:`Очистити друкарську пластину`,checkExtruder:`Перевірити шестерні екструдера`,checkCooling:`Перевірити вентилятори охолодження`,generalInspection:`Загальний огляд`,cleanCarbonRods:`Очистити карбонові стрижні`,lubricateSteelRods:`Змастити сталеві стрижні`,cleanSteelRods:`Очистити сталеві стрижні`,cleanLinearRails:`Очистити лінійні напрямні`,checkPtfeTube:`Перевірити PTFE-трубку`,replaceHepaFilter:`Замінити HEPA-фільтр`,replaceCarbonFilter:`Замінити вугільний фільтр`,lubricateLeftNozzleRail:`Змастити ліву напрямну сопла`},maintenanceComplete:`Технічне обслуговування позначено як завершене`,typeUpdated:`Оновлено тип обслуговування`,typeDeleted:`Тип обслуговування видалено`,defaultsRestored:`Відновлено завдання за замовчуванням {{count}}`,printHoursUpdated:`Години друку оновлено`,printerAssigned:`Принтер призначено`,printerRemoved:`Принтер видалено`,deleteTypeConfirm:`Видалити "{{name}}"?`,deleteSystemTypeTitle:`Видалити завдання обслуговування за умовчанням?`,deleteSystemTypeMessage:`Ви впевнені, що бажаєте видалити стандартне завдання обслуговування "{{name}}"?`,noPermissionUpdate:`Ви не маєте дозволу на оновлення елементів обслуговування`,noPermissionPerform:`Ви не маєте дозволу на проведення технічного обслуговування`,noPermissionEditTypes:`Ви не маєте дозволу редагувати типи обслуговування`,noPermissionDeleteTypes:`Ви не маєте дозволу на видалення типів обслуговування`,noPermissionEditHours:`Ви не маєте дозволу редагувати години друку`,noPermissionRemovePrinter:`Ви не маєте дозволу на видалення призначень принтера`,noPermissionAssignPrinter:`Ви не маєте дозволу призначати принтери`,noPermissionEditIntervals:`Ви не маєте дозволу редагувати інтервали`,configureSettings:`Налаштувати типи та інтервали технічного обслуговування`},settings:{sliceEngine:`Рушій нарізання`,sliceEngineSidecar:`Серверний sidecar`,sliceEngineSidecarHint:`Нарізання виконується на сервері, у контейнері sidecar слайсера.`,sliceEngineBrowser:`У браузері`,sliceEngineBrowserHint:`Нарізання виконується на цьому пристрої, без сервера.`,title:`Налаштування`,general:`Загальні`,tabs:{general:`Загальні`,smartPlugs:`Розумні розетки`,sensors:`Датчики`,notifications:`Сповіщення`,queue:`Робочий процес`,queueDispatch:`Черга та відправка`,queuePipelines:`Конвеєри`,filament:`Філамент`,network:`Мережа`,apiKeys:`Ключі API`,virtualPrinter:`Віртуальний принтер`,spoolbuddy:`SpoolBuddy`,failureDetection:`Виявлення несправностей`,users:`Автентифікація`,backup:`Резервне копіювання`,emailAuth:`Автентифікація електронної пошти`,ldap:`LDAP`,twoFa:`Двофакторна автентифікація`,oidc:`SSO / OIDC`,security:`Безпека`},spoolbuddy:{infoTitle:`Пристрої SpoolBuddy`,infoBody:`Термінали SpoolBuddy автоматично реєструються за допомогою сигналів стану. Скасуйте реєстрацію пристрою, якщо він більше не використовується або після збою служби залишився застарілий дублікат.`,duplicatesTitle:`Зареєстровано пристроїв: {{count}}`,duplicatesBody:`Інтерфейс термінала використовує лише перший зареєстрований пристрій. Якщо один із записів є застарілим дублікатом після збою, скасуйте його реєстрацію. Пристрій у мережі зареєструється знову під час наступного сигналу стану.`,empty:`Ще немає зареєстрованих пристроїв SpoolBuddy.`,online:`Онлайн`,offline:`Не в мережі`,unregister:`Скасувати реєстрацію`,unregisterSuccess:`Реєстрацію пристрою скасовано`,unregisterError:`Не вдалося скасувати реєстрацію пристрою`,confirmTitle:`Скасувати реєстрацію пристрою SpoolBuddy?`,confirmBody:`Пристрій «{{hostname}}» ({{deviceId}}) буде видалено з бази даних. Якщо він у мережі, то зареєструється знову під час наступного сигналу стану.`,ipAddress:`IP-адреса`,firmware:`Прошивка`,lastSeen:`Востаннє в мережі`,daemonUptime:`Час роботи демона`,systemUptime:`Час роботи системи`,never:`Ніколи`,nfc:`NFC`,scale:`Ваги`,cpuTemp:`Температура ЦП`,cpuLoad:`Завантаження ЦП`,memory:`Пам’ять`,disk:`Диск`,update:`Оновити`,updateConfirmTitle:`Оновити демон Spoolbuddy?`,updateConfirmBody:`Запустити оновлення програмного забезпечення на "{{hostname}}"? Щойно оновлення буде застосовано, демон перезапуститься.`,restartBrowser:`Перезапустити браузер`,restartBrowserConfirmTitle:`Перезапустити веб-переглядач термінала?`,restartBrowserConfirmBody:`Перезапустити веб-переглядач кіоску на "{{hostname}}"? Дисплей на короткий час згасне.`,restartDaemon:`Перезапустити службу`,restartDaemonConfirmTitle:`Перезапустити демон Spoolbuddy?`,restartDaemonConfirmBody:`Перезапустити демон Spoolbuddy на "{{hostname}}"? Пристрій вийде з мережі на кілька секунд.`,reboot:`Перезавантажити`,rebootConfirmTitle:`Перезавантажити пристрій?`,rebootConfirmBody:`Перезавантажити «{{hostname}}»? Пристрій буде офлайн приблизно хвилину.`,shutdown:`Вимкнути`,shutdownConfirmTitle:`Вимкнути пристрій?`,shutdownConfirmBody:`Вимкнути "{{hostname}}"? Щоб увімкнути його, вам знадобиться фізичний доступ.`,commandConfirm:`Підтвердити`,commandQueued:`Команда в черзі`,commandError:`Не вдалося надіслати команду`},ldap:{title:`Автентифікація LDAP`,enabledDesc:`Автентифікація LDAP увімкнена`,disabledDesc:`Автентифікація LDAP вимкнена`,disabledHint:`Налаштуйте та збережіть налаштування LDAP нижче, а потім увімкніть.`,enabled:`LDAP автентифікація ввімкнена`,disabled:`LDAP автентифікація вимкнена`,feature1:`Користувачі можуть входити за допомогою облікових даних LDAP.`,feature2:`Обліковий запис локального адміністратора залишається резервним`,feature3:`Групи LDAP зіставляються з групами BamBuddy під час входу`,serverConfig:`Налаштування сервера LDAP`,serverUrl:`URL сервера`,serverUrlHint:`Використовуйте ldaps:// для SSL або ldap:// із StartTLS`,security:`Безпека`,securityHint:`StartTLS оновлює звичайне підключення до TLS. LDAPS використовує TLS із самого початку.`,bindDn:`DN прив’язки (службовий обліковий запис)`,bindPassword:`Пароль прив’язки`,searchBase:`Базовий DN пошуку`,userFilter:`Фільтр пошуку користувача`,userFilterHint:`{username} буде замінено на ім’я користувача, введене під час входу. Для OpenLDAP використовуйте (uid={username}).`,advanced:`Розширені налаштування`,autoProvision:`Автоматично створювати користувачів`,autoProvisionHint:`Автоматично створювати обліковий запис BamBuddy після першого входу LDAP.`,defaultGroup:`Група за замовчуванням`,defaultGroupNone:`— Немає (без резервної групи) —`,defaultGroupHint:`Запасна група призначається, коли користувач LDAP автентифікується, але його немає в списку жодної зіставленої групи LDAP. Залиште порожнім, щоб залишити непризначених користувачів без дозволів.`,groupMapping:`Зіставлення груп (JSON)`,groupMappingHint:`Зіставте DN груп LDAP із групами BamBuddy. Доступні групи: `,testConnection:`Перевірити підключення`,settingsSaved:`Налаштування LDAP збережено`,errors:{serverRequired:`Потрібна URL-адреса сервера LDAP`,searchBaseRequired:`Потрібен базовий DN пошуку`,enableAuthFirst:`Спочатку ввімкніть автентифікацію`,configureLdapFirst:`Спочатку збережіть налаштування LDAP.`}},email:{smtpSettings:`Налаштування SMTP`,smtpHost:`Сервер SMTP`,smtpPort:`Порт SMTP`,security:`Безпека`,authentication:`Автентифікація`,username:`Ім’я користувача`,password:`Пароль`,fromEmail:`Адреса відправника`,fromName:`Ім’я відправника`,testConnection:`Перевірити підключення SMTP`,testRecipient:`Електронна адреса тестового одержувача`,sendTest:`Надіслати тестовий електронний лист`,sending:`Надсилання...`,save:`Зберегти налаштування`,saving:`Збереження...`,advancedAuth:`Розширена автентифікація`,advancedAuthEnabled:`Розширену автентифікацію ввімкнено`,advancedAuthEnabledDesc:`Функції керування користувачами на основі електронної пошти активні. Нові користувачі отримають автоматично згенеровані паролі електронною поштою, і користувачі зможуть скинути свої паролі за допомогою функції «Забутий пароль».`,advancedAuthDisabled:`Розширену автентифікацію вимкнено`,advancedAuthDisabledDesc:`Увімкніть розширену автентифікацію, щоб активувати функції електронної пошти для керування користувачами.`,enable:`Увімкнути`,disable:`Вимкнути`,feature1:`Паролі генеруються автоматично та надсилаються новим користувачам електронною поштою`,feature2:`Користувачі можуть входити за іменем користувача або електронною адресою`,feature3:`Доступна функція «Забув пароль».`,feature4:`Адміністратори можуть скинути паролі користувачів електронною поштою`,errors:{requiredFields:`Заповніть усі обов’язкові поля`,usernameRequired:`Якщо ввімкнено автентифікацію, потрібне ім’я користувача`,enterTestEmail:`Введіть тестову електронну адресу`,smtpServerAndEmail:`Перед перевіркою вкажіть SMTP-сервер і адресу відправника`,usernamePasswordRequired:`Якщо ввімкнено автентифікацію, потрібні ім’я користувача та пароль`,configureSmtpFirst:`Спочатку налаштуйте та перевірте параметри SMTP`,enableAuthFirst:`Щоб використовувати функції електронної пошти, спочатку ввімкніть автентифікацію.`},success:{settingsSaved:`Налаштування SMTP успішно збережено`},securityOptions:{starttls:`STARTTLS (порт 587)`,ssl:`SSL/TLS (порт 465)`,none:`Без шифрування (порт 25)`},authOptions:{enabled:`Увімкнено`,disabled:`Вимкнено`}},appearance:`Зовнішній вигляд`,notifications:`Сповіщення`,smartPlugs:`Розумні розетки`,spoolman:`Spoolman`,updates:`Оновлення`,language:`Мова`,languageDescription:`Виберіть бажану мову`,theme:`Тема`,themeLight:`Світла`,themeDark:`Темна`,themeSystem:`Системна`,defaultView:`Початкове подання`,defaultViewDescription:`Сторінка, яка відображатиметься під час відкриття програми`,checkForUpdates:`Перевірити наявність оновлень`,autoUpdate:`Автоматичне оновлення`,currentVersion:`Поточна версія`,latestVersion:`Остання версія`,upToDate:`У вас установлено останню версію`,updateAvailable:`Доступне оновлення`,notificationLanguage:`Мова сповіщень`,notificationLanguageDescription:`Мова для push-повідомлень`,bedCooledThreshold:`Поріг охолодження столу`,bedCooledThresholdDescription:`Температура, нижче якої стіл вважається охолодженим після друку`,userNotificationsEnabled:`Сповіщення користувача`,userNotificationsEnabledDescription:`Увімкніть меню сповіщень користувача та сповіщення електронною поштою про події завдань друку. Потрібна розширена автентифікація.`,userNotificationsDisabledHint:`Увімкніть розширену автентифікацію, щоб використовувати сповіщення користувачів.`,notificationProviders:`Служби сповіщень`,addProvider:`Додати службу`,editProvider:`Редагувати службу`,providerType:`Тип служби`,testNotification:`Перевірити сповіщення`,testSuccess:`Тестове сповіщення успішно надіслано`,testFailed:`Не вдалося надіслати тестове сповіщення`,quietHours:`Період тиші`,quietHoursDescription:`Не надсилати сповіщень у цей період`,quietHoursStart:`Початок`,quietHoursEnd:`Кінець`,events:{title:`Події сповіщень`,printStart:`Друк розпочато`,printComplete:`Друк завершено`,printFailed:`Помилка друку`,printStopped:`Друк зупинено`,printProgress:`Етапи виконання`,printProgressDescription:`Сповіщати після досягнення 25%, 50% і 75%`,printerOffline:`Принтер не в мережі`,printerError:`Помилка принтера`,filamentLow:`Мало філаменту`,maintenanceDue:`Потрібне технічне обслуговування`,maintenanceDueDescription:`Повідомити, коли потрібне обслуговування`},smartPlug:{title:`Розумні розетки`,add:`Додати розумну розетку`,edit:`Редагувати розумну розетку`,name:`Назва`,ipAddress:`IP-адреса`,linkedPrinter:`Пов’язаний принтер`,autoOn:`Автоматичне ввімкнення`,autoOnDescription:`Увімкнути на початку друку`,autoOff:`Автоматичне вимкнення`,autoOffDescription:`Вимкнути після завершення друку`,offDelay:`Затримка вимкнення`,offDelayMinutes:`Хвилини після завершення друку`,offDelayTemp:`Коли температура сопла нижча за задану`,currentState:`Поточний стан`,turnOn:`Увімкнути`,turnOff:`Вимкнути`},filamentTracking:`Облік філаменту`,filamentTrackingDesc:`Виберіть спосіб обліку котушок філаменту. Можна використовувати вбудований інвентар або підключити зовнішній сервер Spoolman.`,autoAddUnknownRfid:`Автоматично додавати невідомі RFID-котушки`,autoAddUnknownRfidDesc:`Автоматично створювати запис інвентарю, коли виявлено котушку з невідомою RFID-міткою. Вимкніть, якщо ви заздалегідь реєструєте нові котушки вручну, щоб уникнути дублікатів.`,filamentChecks:`Перевірки філаменту`,disableFilamentWarnings:`Вимкнути попередження про філамент`,disableFilamentWarningsDesc:`Не показувати попередження про недостатню кількість філаменту під час запуску друку або додавання до черги`,preferLowestFilament:`Віддавати перевагу котушці з найменшим залишком`,preferLowestFilamentDesc:`Якщо підходять кілька котушок, використовувати котушку з найменшим залишком філаменту`,preferLowestFilamentBackupNote:`Діє лише тоді, коли на принтері ввімкнено AMS Filament Backup. Інакше після вичерпання вибраної котушки принтер не зможе перейти на другу.`,trackingModeBuiltIn:`Вбудований інвентар`,trackingModeBuiltInDesc:`Автоматичне зіставлення за RFID та облік використання`,trackingModeSpoolmanDesc:`Зовнішній сервер керування філаментом`,builtInFeatureRfid:`Автоматично виявляє RFID-котушки Bambu Lab в AMS`,builtInFeatureUsage:`Обліковує витрати філаменту для кожного друку`,builtInFeatureCatalog:`Керування котушками, кольорами та профілями K-фактора`,builtInFeatureThirdParty:`Котушки сторонніх виробників можна пов’язувати з котушками інвентарю`,amsSyncButton:`Синхронізувати масу з AMS`,amsSyncTitle:`Синхронізація маси котушок з AMS`,amsSyncMessage:`Масу всіх котушок інвентарю буде перезаписано відповідно до поточних значень залишку у відсотках, отриманих з AMS підключених принтерів. Скористайтеся цим для відновлення пошкоджених даних про масу. Принтери мають бути в мережі.`,amsSyncing:`Синхронізація...`,amsSyncSuccess:`Синхронізовано: {{synced}}; пропущено: {{skipped}}`,amsSyncError:`Не вдалося синхронізувати масу з AMS`,spoolmanAmsSyncButton:`Синхронізувати масу котушок Spoolman з AMS`,spoolmanAmsSyncTitle:`Синхронізація маси котушок Spoolman з AMS`,spoolmanAmsSyncMessage:`Масу всіх котушок Spoolman буде оновлено відповідно до поточних значень залишку в AMS підключених принтерів. Принтери мають бути в мережі.`,spoolmanAmsSyncing:`Синхронізація...`,spoolmanAmsSyncSuccess:`Синхронізовано: {{synced}}; пропущено: {{skipped}}`,spoolmanAmsSyncError:`Не вдалося синхронізувати масу котушок Spoolman з AMS`,spoolmanAmsSyncErrorUnreachable:`Не вдалося синхронізувати масу котушок Spoolman: сервер Spoolman недоступний`,spoolmanAmsSyncErrorNotConfigured:`Не вдалося синхронізувати масу котушок Spoolman: сервер Spoolman не налаштовано`,spoolmanNotConfigured:`Spoolman не налаштовано`,spoolmanFilamentCatalogTitle:`Каталог філаментів Spoolman`,spoolmanFilamentCatalogDesc:`Назви філаментів і вага тари з вашого екземпляра Spoolman. Тут можна редагувати назву та вагу котушки; усі інші властивості керуються безпосередньо в Spoolman.`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`URL вашого сервера Spoolman (наприклад, http://localhost:7912)`,spoolmanConnected:`Підключено`,spoolmanDisconnected:`Відключено`,status:`Статус`,connect:`Підключитися`,disconnect:`Від’єднатися`,howSyncWorks:`Як працює синхронізація`,syncInfoRfidOnly:`Синхронізуються лише офіційні котушки Bambu Lab із RFID.`,syncInfoAutoCreate:`Нові котушки автоматично створюються в Spoolman під час першої синхронізації`,syncInfoThirdPartySkipped:`Котушки не від Bambu Lab — сторонні або повторно заправлені — пропускаються`,linkingExistingSpools:`Зв’язування існуючих котушок`,linkingExistingSpoolsDesc:`Щоб пов’язати наявні котушки Spoolman з AMS, наведіть вказівник на слот AMS і натисніть «Пов’язати зі Spoolman».`,syncMode:`Режим синхронізації`,syncModeAuto:`Автоматичний`,syncModeManual:`Тільки вручну`,syncModeAutoDesc:`Дані AMS синхронізуються автоматично після виявлення змін`,syncModeManualDesc:`Синхронізувати лише вручну`,syncAmsData:`Синхронізувати дані AMS`,syncAmsDataDesc:`Вручну синхронізувати дані AMS принтера зі Spoolman`,allPrinters:`Усі принтери`,noDefaultPrinter:`Немає умовчання (запитувати щоразу)`,sidebarOrder:`Порядок бічної панелі`,saveThumbnails:`Зберегти мініатюри`,captureFinishPhoto:`Зробити фото після завершення`,noPrintersConfigured:`Принтери не налаштовані`,archiveMode:{always:`Завжди створювати запис архіву`,never:`Ніколи не створювати запис архіву`,ask:`Запитувати щоразу`},checkForUpdatesLabel:`Перевірити наявність оновлень`,checkPrinterFirmware:`Перевірити прошивку принтера`,includeBetaUpdates:`Включати бета-версії`,includeBetaUpdatesDesc:`Повідомляти про бета-версії та попередні версії під час перевірки оновлень`,localLogin:{disable:`Вимкнути локальний вхід за іменем користувача й паролем`,disableHint:`Якщо ввімкнено, увійти можна буде лише через постачальників SSO. На LDAP це не впливає. Щоб зберегти резервний спосіб входу, установіть на сервері BAMBUDDY_LOCAL_LOGIN=true.`},enableRetry:`Увімкнути повторну спробу`,homeAssistantDescription:`Керуйте розумними розетками через Home Assistant`,environmentManagedLabel:`(Кероване середовище)`,autoEnabledViaEnv:`Автоматично вмикається через змінні середовища`,urlFromEnvReadOnly:`Значення, встановлене змінною середовища HA_URL (лише читання)`,tokenFromEnvReadOnly:`Значення, установлене змінною середовища HA_TOKEN (лише читання)`,mqttConnectedTo:`Підключено до`,prometheusDescription:`Надавати дані принтерів у форматі Prometheus`,noSmartPlugsTitle:`Розумні розетки не налаштовано`,noSmartPlugsDescription:`Додайте розумну розетку на базі Tasmota, щоб відстежувати споживання енергії та автоматизувати керування живленням.`,noProvidersTitle:`Постачальники не налаштовані`,noProvidersDescription:`Додайте постачальника, щоб отримувати сповіщення.`,noTemplatesAvailable:`Немає доступних шаблонів. Перезапустіть серверну частину, щоб створити стандартні шаблони.`,apiPermissionView:`Перегляд стану принтера та черги`,apiPermissionEdit:`Додавання та видалення елементів із черги друку`,apiKeysEmptyTitle:`Немає ключів API`,apiKeysEmptyDescription:`Створіть ключ API для інтеграції із зовнішніми службами.`,noUsersFound:`Користувачів не знайдено`,noGroupsFound:`Групи не знайдено`,noGroupsAvailable:`Немає доступних груп`,passwordsDoNotMatch:`Паролі не збігаються`,systemGroupWarning:`Назви системних груп не можна змінювати`,authDisabledTitle:`Автентифікація вимкнена`,authDisabledFeature1:`Вимагати входу для доступу до системи`,authDisabledFeature2:`Створювати кількох користувачів із дозволами на основі груп`,authDisabledFeature3:`Керувати доступом за допомогою понад 50 окремих дозволів`,userHasCreated:`Цей користувач створив:`,userItemsQuestion:`Що зробити з цими елементами?`,deleteUserConfirm:`Ви впевнені, що хочете видалити цього користувача?`,actionCannotBeUndone:`Цю дію не можна скасувати.`,addFirstSmartPlug:`Додати першу розумну розетку`,providers:`Постачальники`,log:`Журнал`,testAll:`Перевірити все`,testResults:`Результати тестування`,testPassedCount:`{{count}} пройдено`,testFailedCount:`{{count}} не вдалося`,messageTemplates:`Шаблони повідомлень`,messageTemplatesDescription:`Налаштуйте текст сповіщень для кожної події.`,apiKeys:`Ключі API`,apiKeysDescription:`Створіть ключі API для зовнішніх інтеграцій і веб-хуків.`,createKey:`Створити ключ`,apiKeyCreated:`Ключ API створено успішно`,apiKeyCopyWarning:`Скопіюйте цей ключ зараз — його більше не буде показано!`,useInApiBrowser:`Використати в оглядачі API`,apiKeyQrButton:`QR-код`,apiKeyQrTitle:`Відскануйте для налаштування`,apiKeyQrCaption:`Скануйте за допомогою мобільного додатка, щоб додати цей сервер і ключ API.`,apiKeyQrWarning:`Містить ваш секретний ключ API. Не передавайте його іншим і не зберігайте знімки екрана там, де їх можуть побачити сторонні.`,createNewApiKey:`Створити новий ключ API`,keyName:`Назва ключа`,keyNamePlaceholder:`наприклад, Home Assistant, OctoPrint`,readStatus:`Читати статус`,readStatusDescription:`Перегляд стану принтера, черги, бібліотеки, архівів і конвеєрів слайсера`,manageQueue:`Керувати чергою`,manageQueueDescription:`Додавання та видалення елементів із черги друку. Разом із «Керувати бібліотекою» — запуск конвеєрів слайсера`,controlPrinter:`Керування принтером`,controlPrinterDescription:`Призупинення, відновлення та зупинка друку`,manageLibrary:`Керувати бібліотекою`,manageLibraryDescription:`Вивантажувати, перейменовувати, видаляти та слайсити файли бібліотеки; імпортувати моделі з MakerWorld. Разом із «Керувати чергою» — запуск конвеєрів слайсера`,manageInventory:`Керувати інвентарем`,manageInventoryDescription:`Створення, оновлення та видалення котушок і записів інвентарю. Потрібно для кіосків SpoolBuddy: сканування NFC, покази ваг і системні команди кіоску.`,manageMaintenance:`Керувати технічним обслуговуванням`,manageMaintenanceDescription:`Реєстрація завершеного технічного обслуговування, скидання лічильників, редагування інтервалів і керування каталогом технічного обслуговування. Підходить для автоматизації Home Assistant, яка записує «Я очистив сопло», не надаючи ширшого контролю над принтером.`,manageArchives:`Керувати архівами`,manageArchivesDescription:`Редагувати та видаляти архіви друку, у тому числі старі друки та їхній статистичний внесок. Підходить для автоматизації, яка обрізає історію друку.`,manageProjects:`Керувати проєктами`,manageProjectsDescription:`Створюйте, оновлюйте та видаляйте проєкти, додавайте до них архіви. Підходить для автоматизації, яка організовує друк у проєкти.`,libraryBadge:`Бібліотека`,inventoryBadge:`Інвентар`,maintenanceBadge:`Технічне обслуговування`,archivesBadge:`Архіви`,projectsBadge:`Проєкти`,cloudAccess:`Дозволити доступ до хмари`,cloudAccessDescription:`Дозволити читати від вашого імені профілі та філаменти Bambu Cloud. Потрібен вхід у Bambu Cloud.`,cloudBadge:`Хмара`,updateEnergyCost:`Оновлювати ціну електроенергії`,updateEnergyCostDescription:`Дозволити цьому ключу надсилати нову ціну електроенергії за кВт·год до /settings/electricity-price. Це корисно для автоматизацій Home Assistant із динамічними тарифами (Tibber, Octopus тощо). Це єдине поле налаштувань, яке можна змінювати за допомогою ключа API.`,energyCostBadge:`Енергія`,legacyKey:`Застарілий`,legacyKeyTooltip:`Створено до отримання права власності на користувача; повторно створити, щоб використовувати доступ до хмари`,unnamedKey:`Безіменний ключ`,lastUsed:`Останнє використання`,read:`Читання`,control:`Керування`,createFirstKey:`Створити перший ключ`,webhookEndpoints:`Кінцеві точки вебхуків`,webhookApiKeyHint:`Використовуйте свій ключ API у заголовку X-API-Key.`,webhook:{getAllStatus:`Отримати весь стан принтера`,getSpecificStatus:`Отримати певний стан принтера`,addToQueue:`Додати до черги друку`,pausePrint:`Призупинити друк`,resumePrint:`Відновити друк`,stopPrint:`Зупинити друк`},apiBrowser:`Оглядач API`,apiBrowserDescription:`Переглядайте й перевіряйте всі доступні кінцеві точки API.`,apiKeyForTesting:`Ключ API для тестування`,apiKeyPlaceholder:`Вставте сюди свій ключ API, щоб перевірити автентифіковані кінцеві точки...`,apiKeyHint:`Цей ключ буде надіслано як заголовок X-API-Key із запитами.`,deleteApiKeyTitle:`Видалити ключ API`,deleteApiKeyMessage:`Ви впевнені, що хочете видалити цей ключ API? Будь-які інтеграції за допомогою цього ключа перестануть працювати.`,deleteKey:`Видалити ключ`,amsDisplayThresholds:`Пороги індикаторів AMS`,amsThresholdsDescription:`Налаштуйте колірні пороги для індикаторів вологості та температури AMS.`,humidity:`Вологість`,goodGreen:`Добре (зелений)`,fairOrange:`Задовільний (помаранчевий)`,aboveFairBad:`Значення вище задовільного порога відображається червоним (погано)`,fairAlsoDryingThreshold:`Цей поріг також використовується для запуску автоматичного сушіння, якщо його ввімкнено`,fairBelowDryingFloor:`Автоматичне сушіння не може досягти цього значення: за увімкненого нагрівача AMS показує {{floor}} % або більше, тож кожен цикл завершувався б і одразу починався знову. Встановіть значення понад {{floor}} %, якщо користуєтеся автоматичним сушінням.`,temperature:`Температура`,goodBlue:`Добре (синій)`,aboveFairHot:`Значення вище задовільного порога відображається червоним (гаряче)`,tempAlarmThreshold:`Тривога вище`,tempAlarmSeparateFromBand:`Сповіщення надсилає лише поріг тривоги — «добре» та «задовільно» тільки забарвлюють індикатор. Залиште порожнім, щоб спрацьовувати на задовільному порозі, як раніше.`,tempAlarmMustBePositive:`Поріг 0 або менший ігнорується — тривога спрацьовує на задовільному порозі.`,historyRetention:`Збереження історії`,keepSensorHistory:`Зберігати історію датчиків для`,historyRetentionDescription:`Старіші дані про вологість і температуру буде автоматично видалено`,defaultPrintOptions:`Параметри друку за умовчанням`,defaultPrintOptionsDescription:`Установіть типові значення параметрів для нових завдань друку. Їх можна змінити для окремого завдання в діалоговому вікні друку.`,defaultBedLevelling:`Вирівнювання столу`,defaultBedLevellingDesc:`Автоматичне вирівнювання столу перед друком`,defaultFlowCali:`Калібрування потоку`,defaultFlowCaliDesc:`Калібрувати потік екструзії`,defaultVibrationCali:`Калібрування вібрації`,defaultVibrationCaliDesc:`Зменшувати артефакти від вібрації`,defaultLayerInspect:`Перевірка першого шару`,defaultLayerInspectDesc:`Перевірка першого шару за допомогою ШІ`,defaultTimelapse:`Таймлапс`,defaultTimelapseDesc:`Записувати таймлапс`,defaultNozzleOffsetCali:`Калібрування зсуву сопла`,defaultNozzleOffsetCaliDesc:`Калібрувати зміщення сопел між екструдерами`,tempFanPresetsTitle:`Профілі температури та вентилятора`,tempFanPresetsDescription:`Налаштуйте значення швидкого вибору в спливних панелях температури й швидкості вентилятора на картці принтера. Кнопка «Вимкнути» відображається завжди.`,tempFanPresetsNozzle:`Температура сопла`,tempFanPresetsBed:`Температура столу`,tempFanPresetsChamber:`Температура камери`,tempFanPresetsFan:`Швидкість вентилятора`,tempFanPresetsReset:`Відновити налаштування за замовчуванням`,concurrentUploadsTitle:`Паралельні вивантаження`,concurrentUploadsDescription:`Кількість принтерів, на які черга може одночасно надсилати файли. Передавання на принтери відбувається повільно — великий файл може передаватися кілька хвилин — і кожен принтер чекає своєї черги. Для великого парку збільшення цього значення скорочує очікування останнього принтера в партії. Зменште його, якщо мережа або сервер Bambuddy не справляється з паралельними передаваннями.`,concurrentUploadsLabel:`Кількість принтерів для одночасного передавання`,concurrentUploadsHelp:`1 надсилає на один принтер за раз (стара поведінка). За замовчуванням 4.`,staggeredStart:`Поетапний запуск`,staggeredStartDescription:`Типовий розмір групи та інтервал для поетапного запуску партії на кількох принтерах. Значення можна змінити для кожної партії у вікні друку.`,preheatTitle:`Попереднє нагрівання й термовитримка`,preheatDescription:`Нагрівати стіл — і камеру, якщо це підтримується — та витримувати задану температуру перед кожним друком із черги. Це корисно для інженерних філаментів, як-от PA й ABS, на принтерах без активного нагрівача камери: стіл нагріває камеру тепловим випромінюванням, доки триває термовитримка. Цільова температура столу зчитується з файлу друку; поведінка камери залежить від моделі принтера.`,preheatEnabled:`Увімкнути попереднє нагрівання й термовитримку`,preheatEnabledDesc:`Якщо вимкнено, завдання з черги надсилаються на друк негайно. Для кожного елемента черги це налаштування можна перевизначити окремо.`,preheatFilamentTargetsLabel:`Цільова температура камери за типом філаменту (°C)`,preheatFilamentTargetsHint:`Bambuddy вибирає найвищу цільову температуру серед завантажених слотів AMS. Друк, для всіх слотів якого визначається 0 — PLA, PETG, TPU, PVA, — повністю пропускає прогрівання й починається одразу.`,preheatFilamentTargetsReset:`Відновити налаштування за замовчуванням`,preheatFilamentTargetsDefaultRow:`Інше / не зіставлене`,preheatMaxWait:`Максимальний час очікування (секунди)`,preheatMaxWaitHelp:`Максимальна тривалість нагрівання камери перед переходом до наступного етапу.`,preheatSoak:`Термовитримка (с)`,preheatSoakHelp:`Час термовитримки після досягнення цільової температури або завершення максимального часу очікування.`,preheatHardwareTitle:`Особливості за моделями принтерів:`,preheatHardwareDetail:`H2C/H2D/H2D Pro/H2S/X2D/X1E активно нагрівають камеру командою M141. X1C/P2S зчитують температуру камери, але покладаються на нагрівання тепловим випромінюванням від столу. P1S/P1P/A1/A1 Mini не мають датчика камери — для них застосовується лише таймер термовитримки.`,preheatPerItemDesc:`Нагрівати стіл і камеру перед початком цього друку. Типове значення успадковується з перемикача «Налаштування → Робочий процес».`,preheatOverride_inherit:`Успадкувати`,preheatOverride_on:`Увімкнено`,preheatOverride_off:`Вимкнено`,calibrationMode_off:`Вимкнено`,calibrationMode_on:`Увімкнено`,calibrationMode_auto:`Авто`,preheatTargetOverride:`Інша цільова температура камери (°C; порожньо — типове значення для філаменту)`,preheatTargetOverrideHelp:`0 нагріває стіл і виконує витримку без камери. Якщо поле порожнє, друк, якому камера не потрібна, повністю пропускає прогрівання.`,plateClear:`Підтвердження очищення друкарської пластини`,requirePlateClear:`Вимагати підтвердження очищення друкарської пластини`,requirePlateClearDescription:`Якщо ввімкнено, планувальник перед запуском наступного завдання на принтері із завершеним друком очікує підтвердження, що друкарську пластину очищено. Вимкнення також приховує індикатор стану пластини та кнопку «Позначити пластину як очищену» на картках принтерів.`,keepBedWarm:`Тримати стіл теплим між друком`,keepBedWarmDesc:`Поки очікується підтвердження очищення пластини, стіл підтримується при вказаній нижче температурі підігріву, щоб камера залишалася теплою, — або при температурі столу наступного друку, якщо вона вища. Застосовується лише коли наступний друк потребує нагрівання камери (ASA, ABS, PA, PC тощо). Потрібно увімкнути підтвердження очищення пластини.`,keepWarmBedTemp:`Температура столу для підтримання тепла (°C)`,keepWarmBedTempHelp:`Використовується, коли стіл слугує для нагрівання камери: під час підтримання тепла та під час попереднього нагріву, якщо у файлі друку немає температури столу. Вища температура з файлу друку завжди має пріоритет.`,keepWarmMaxMinutes:`Припинити підігрів через (хвилин)`,keepWarmMaxMinutesHelp:`Якщо пластину не звільнено за цей час, нагрівачі вимикаються, а не залишаються увімкненими нескінченно.`,gcodeInjection:`Вставлення G-коду`,gcodeInjectionDescription:`Налаштуйте власний G-код для вставлення на початку та/або наприкінці друку в системах автоматичного друку, як-от Farmloop, SwapMod, AutoClear і Printflow 3D. Фрагменти налаштовуються для кожної моделі принтера та застосовуються, коли для елемента черги ввімкнено «Вставляти G-код».`,gcodeInjectionNoPrinters:`Принтерів не знайдено. Додайте принтери, щоб налаштувати фрагменти G-коду.`,gcodeStartLabel:`Початковий G-код`,gcodeEndLabel:`Завершальний G-код`,gcodeStartPlaceholder:`G-код додається перед початком друку...`,gcodeEndPlaceholder:`G-код додається після завершення друку...`,staggerGroupSize:`Розмір групи`,staggerGroupSizeHelp:`Кількість принтерів, що одночасно запускаються в кожній групі`,staggerInterval:`Інтервал (хвилини)`,staggerIntervalHelp:`Затримка між стартом кожної групи`,queueDrying:`Автоматичне сушіння між завданнями черги`,queueDryingDescription:`Автоматично сушити філамент в AMS, коли принтер простоює між завданнями з черги. Сушіння запускається відповідно до заданого вище порога вологості.`,queueDryingEnabled:`Увімкнути автосушку`,queueDryingEnabledDescription:`Автоматичний запуск AMS сушіння, коли принтер неактивний і вологість перевищує порогове значення`,queueDryingBlock:`Чекати завершення сушіння`,queueDryingBlockDescription:`Не запускати завдання з черги до завершення сушіння. Якщо вимкнено, друк має пріоритет над сушінням.`,ambientDryingEnabled:`Фонове сушіння`,ambientDryingEnabledDescription:`Автоматичне сушіння філаменту на неактивних принтерах, коли вологість перевищує порогове значення, навіть без друку в черзі.`,printDryingEnabled:`Продовжувати сушіння під час друку`,printDryingEnabledDescription:`Дозволити автоматичному сушінню тривати під час друку на підтримуваному обладнанні (H2D, H2C, H2S, P2S, H2D Pro, X2D, X1C, A2L з новими версіями прошивки). Для захисту котушок температура сушіння автоматично обмежується значенням на 5 °C нижчим за профіль для режиму простою.`,dryingPresets:`Профілі сушіння`,dryingPresetsDescription:`Температура та тривалість для кожного типу філаменту. AMS 2 Pro використовує нижчі температури, AMS-HT підтримує вищі температури.`,dryingFilament:`Філамент`,humidityThresholds:`Пороги вологості`,humidityThresholdsDescription:`Пороги вологості за типом філаменту для автоматичного сушіння та попереджень. Для змішаного завантаження в одному AMS використовується найнижчий поріг.`,humidityThresholdCol:`Поріг`,humidityThresholdDefault:`За замовчуванням (невідомі типи)`,printModal:`Вікно друку`,expandCustomMapping:`Розгорнути настроюване зіставлення за умовчанням`,expandCustomMappingDescription:`Під час друку на кількох принтерах показувати розгорнуте зіставлення для кожного принтера AMS.`,authentication:`Автентифікація`,authEnabledDescription:`Ваш екземпляр захищено автентифікацією користувача`,authDisabledDescription:`Увімкніть запит входу та керування доступом користувачів`,authDisabledMessage:`Увімкніть автентифікацію, щоб створювати облікові записи користувачів, керувати дозволами та захищати свій екземпляр Bambuddy.`,enableAuthentication:`Увімкнути автентифікацію`,currentUser:`Поточний користувач`,changePassword:`Змінити пароль`,admin:`адмін`,users:`Користувачі`,addUser:`Додати користувача`,groups:`Групи`,addGroup:`Додати групу`,system:`система`,noDescription:`Без опису`,userCount:`{{count}} користувачів`,permissionCount:`Дозволи {{count}}.`,createUser:`Створити користувача`,username:`Ім’я користувача`,enterUsername:`Введіть ім’я користувача`,password:`Пароль`,enterPassword:`Введіть пароль`,passwordRequirements:`Принаймні 8 символів, один великий, один малий, одна цифра та один спеціальний символ.`,confirmPassword:`Підтвердити пароль`,confirmPasswordPlaceholder:`Підтвердити пароль`,viewReleaseOnGitHub:`Переглянути випуск на GitHub`,turnAllPlugsOn:`Увімкнути усі розетки`,turnAllPlugsOff:`Вимкнути усі розетки`,clearNotificationLogs:`Очистити журнали сповіщень`,clearLogsMessage:`Це назавжди видалить усі журнали сповіщень старше 30 днів. Цю дію не можна скасувати.`,clearLogs:`Очистити журнали`,resetUiPreferences:`Скинути налаштування UI.`,resetUiPreferencesMessage:`Це скине всі параметри UI до значень за замовчуванням: порядок бічної панелі, тему, макет інформаційної панелі, режими перегляду та параметри сортування. Це НЕ вплине на ваші принтери, архіви та налаштування сервера. Після очищення сторінка перезавантажиться.`,resetPreferences:`Скинути налаштування`,deleteGroupTitle:`Видалити групу`,deleteGroupMessage:`Ви впевнені, що хочете видалити цю групу? Користувачі цієї групи втратять ці дозволи.`,deleteGroup:`Видалити групу`,disableAuthenticationTitle:`Вимкнути автентифікацію`,disableAuthenticationMessage:`Ви впевнені, що бажаєте вимкнути автентифікацію? Це зробить ваш екземпляр Bambuddy доступним без входу. Усі користувачі залишаться в базі даних, але автентифікацію буде вимкнено.`,disableAuthentication:`Вимкнути автентифікацію`,configureBambuddy:`Налаштувати Bambuddy`,systemDefault:`Системне за замовчуванням`,archiveSettings:`Налаштування архіву`,newWindow:`Нове вікно`,embeddedOverlay:`Вбудоване накладання`,preferredSlicer:`Бажаний слайсер`,preferredSlicerDescription:`Слайсер для нарізання в застосунку через допоміжний API-сервіс`,openInSlicerLabel:`Відкрити у слайсері`,openInSlicerInherit:`Такий самий, як API-слайсер`,openInSlicerDescription:`Настільний слайсер, який відкриває кнопка «Відкрити в слайсері». Залиште «Такий самий, як API-слайсер», щоб успадкувати вибір, або виберіть інший слайсер для локального використання.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev має відомі помилки CLI, через які не вдається нарізати багато створених Bambu файлів 3MF. Див. проблеми upstream №12426 — аварійне завершення для розфарбованих файлів із кількома екструдерами — та №13386 — відхилення через сувору перевірку діапазонів параметрів. До появи виправлень upstream рекомендовано використовувати Bambu Studio.`,useSlicerApi:`Використовувати API слайсера`,useSlicerApiDescription:`Якщо ввімкнено, команда «Нарізати» відкриває вбудоване вікно слайсера й викликає допоміжний сервіс slicer-API. Якщо вимкнено — типове значення — файл передається настільному слайсеру через URI-схему.`,slicerCard:`Слайсер`,orcaslicerApiUrl:`URL допоміжного сервісу OrcaSlicer`,bambuStudioApiUrl:`URL допоміжного сервісу Bambu Studio`,slicerStallTimeout:`Тайм-аут простою слайсера (хвилини)`,slicerStallTimeoutDescription:`Перервати нарізку, якщо sidecar не повідомляє про прогрес протягом цього часу. Важкі моделі, які продовжують повідомляти про прогрес, ніколи не перериваються, скільки б часу не знадобилося. Для sidecar без звіту про прогрес це значення використовується як загальний ліміт часу.`,slicerApiUrlDescription:`URL контейнера допоміжного сервісу slicer-API. Залиште поле порожнім, щоб використовувати типові значення зі змінних середовища SLICER_API_URL / BAMBU_STUDIO_API_URL.`,externalCameras:`Зовнішні камери`,costTracking:`Відстеження витрат`,billingEnabled:`Увімкнути розрахунки`,billingEnabledDescription:`Стягувати з користувачів вартість друку та ввімкнути фінансові функції`,printerKillSwitch:`Автозупинка несанкціонованого друку`,printerKillSwitchDescription:`Негайно зупиняє друк, розпочатий без дозволу.`,financeBudgetReset:`Щомісячне скидання фінансового бюджету`,financeBudgetResetDay:`День скидання`,financeBudgetResetDayHelp:`У коротких місяцях скидання виконується в останній день місяця.`,financeBudgetResetTimezone:`Часовий пояс скидання`,financeBudgetResetTimezoneHelp:`Початок бюджетного періоду обчислюється в цьому часовому поясі.`,rebuildLedger:`Перебудувати книгу гаманця`,rebuildLedgerStarted:`Перебудову книги розпочато`,rebuildLedgerConfirmTitle:`Перебудувати книгу гаманця?`,rebuildLedgerConfirmMessage:`Книгу гаманця буде перебудовано для виправлення історичних значень балансу. Запускайте цю дію лише якщо розумієте її наслідки.`,rebuildLedgerInProgress:`Запуск перебудови...`,printsOnly:`Лише друк`,totalConsumption:`Загальне споживання`,dataManagement:`Управління даними`,storageUsage:`Використання сховища`,storageUsageDescription:`Розподіл використання даних за категоріями`,storageUsageTotal:`Всього`,storageUsageErrors:`Помилки`,storageUsageOtherBreakdown:`Інше (включає статичні ресурси, сценарії та файли конфігурації)`,storageUsageSystem:`система`,storageUsageData:`Дані`,storageUsageUnavailable:`Інформація про використання сховища недоступна`,clearNotificationLogsDescription:`Видалити журнали сповіщень старші 30 днів`,resetUiPreferencesDescription:`Скинути порядок бічної панелі, тему, режими перегляду та параметри макета. Принтери, архіви та налаштування не впливають.`,enableHomeAssistant:`Увімкнути Home Assistant`,enableMqtt:`Увімкнути MQTT`,useTls:`Використовуйте TLS`,enableMetricsEndpoint:`Увімкнути кінцеву точку показників`,availableMetrics:`Доступні показники`,editUser:`Редагувати користувача`,deleteUserTitle:`Видалити користувача`,groupName:`Назва групи`,leaveEmptyForAnonymous:`Залиште порожнім для анонімного`,leaveEmptyForNoAuth:`Залиште порожнім, щоб не було автентифікації`,enterNewPassword:`Введіть новий пароль`,confirmNewPassword:`Підтвердити новий пароль`,enterGroupName:`Введіть назву групи`,enterDescriptionOptional:`Введіть опис (необов’язково)`,enterCurrentPassword:`Введіть поточний пароль`,enterNewPasswordMin6:`Введіть новий пароль (мінімум 6 символів)`,toast:{keyCopied:`Ключ скопійовано в буфер обміну`,copyFailed:`Не вдалося скопіювати ключ`,keyAddedToBrowser:`Ключ додано в браузер API.`,clearLogsFailed:`Не вдалося очистити журнали`,uiPreferencesReset:`UI налаштування скинуто. Оновлення...`,authDisabled:`Автентифікацію успішно вимкнено`,authDisableFailed:`Не вдалося вимкнути автентифікацію`,apiKeyCreated:`Ключ API створено`,apiKeyDeleted:`Ключ API видалено`,userCreated:`Користувача створено успішно`,userUpdated:`Користувача успішно оновлено`,userDeleted:`Користувача успішно видалено`,groupCreated:`Групу створено успішно`,groupUpdated:`Групу успішно оновлено`,groupDeleted:`Групу успішно видалено`,fillRequiredFields:`Будь ласка, заповніть усі необхідні поля`,passwordsDoNotMatch:`Паролі не збігаються`,passwordTooShort:`Пароль має бути не менше 8 символів`,passwordNeedsUppercase:`Пароль має містити принаймні одну велику літеру`,passwordNeedsLowercase:`Пароль має містити принаймні одну малу літеру`,passwordNeedsDigit:`Пароль має містити хоча б одну цифру`,passwordNeedsSpecial:`Пароль повинен містити хоча б один спеціальний символ`,enterGroupName:`Будь ласка, введіть назву групи`,settingsSaved:`Налаштування збережено`,noPermissionUpdate:`Ви не маєте дозволу змінювати налаштування`,cameraSettingsSaved:`Налаштування камери збережено`,enterCameraUrl:`Будь ласка, введіть камеру URL`,passwordChanged:`Пароль успішно змінено`,connectionFailed:`Помилка підключення`,testFailed:`Тест не вдалося`,cameraConnected:`Камера підключена{{resolution}}`,cameraConnectedCoalesced:`Камера підключена{{resolution}} (спільно з уже виконуваним захопленням)`},testConnection:`Тестове підключення`,catalog:{spoolCatalog:`Каталог котушок`,spoolCatalogDescription:`Вага порожніх котушок за брендом і типом. Використовується для автоматичного пошуку ваги під час додавання котушок.`,searchCatalog:`Пошук у каталозі...`,addNewEntry:`Додати новий запис`,namePlaceholder:`Назва (наприклад, Bambu Lab - пластик)`,weight:`вага`,type:`Тип`,default:`За замовчуванням`,custom:`Власний`,noMatch:`Немає записів, що відповідають вашому пошуку`,empty:`Немає записів у каталозі`,deleteEntry:`Видалити запис`,deleteConfirm:`Ви впевнені, що хочете видалити "{{name}}"?`,resetCatalog:`Скинути каталог`,resetConfirm:`Скинути каталог до стандартних? Це видалить усі спеціальні записи.`,loadFailed:`Не вдалося завантажити каталог котушок`,nameWeightRequired:`Назва й маса обов’язкові`,entryAdded:`Запис додано`,addFailed:`Не вдалося додати запис`,entryUpdated:`Запис оновлено`,updateFailed:`Не вдалося оновити запис`,entryDeleted:`Запис видалено`,deleteFailed:`Не вдалося видалити запис`,resetSuccess:`Каталог відновлено до типових значень`,resetFailed:`Не вдалося скинути каталог`,exported:`Експортовано записів: {{count}}`,imported:`Імпортовано: {{added}}; пропущено: {{skipped}}`,importFailed:`Не вдалося імпортувати: недійсний формат JSON.`,exportTooltip:`Експортувати каталог до JSON`,importTooltip:`Імпорт каталогу з JSON`,resetTooltip:`Відновити налаштування за замовчуванням`,selectedCount:`Вибрано: {{count}}`,deleteSelected:`Видалити вибране`,bulkDeleteConfirm:`Видалити вибрані записи ({{count}})?`,bulkDeleted:`Видалено записів: {{count}}`,bulkDeleteFailed:`Не вдалося видалити записи`,material:`матеріал`,spoolWeight:`Вага котушки`,color:`Колір`,updateSpoolWeight:`Оновити вагу котушки`,filamentUpdated:`Філамент оновлено`,filamentUpdateFailed:`Не вдалося оновити філамент`,filamentUpdateInvalid:`Недійсні дані філаменту`,keepExistingSpoolWeight:`Зберегти попередню вагу для наявних котушок`,keepExistingSpoolWeightDesc:`Котушки, створені з цим типом філаменту, зберігають стару вагу тари. Нові котушки використовують оновлене значення.`,applyToAllSpools:`Застосувати до всіх котушок`,applyToAllSpoolsDesc:`Усі розрахунки ваги для цього типу філаменту одразу використовують нову вагу тари.`},colorCatalog:{title:`Каталог кольорів`,description:`Кольори філаменту за виробником і матеріалом. Використовується для автоматичного пошуку кольору під час додавання котушок.`,searchColors:`Пошук кольорів...`,allManufacturers:`Усі виробники`,addNewColor:`Додати новий колір`,manufacturer:`Виробник`,colorName:`Назва кольору`,hex:`Hex-код`,materialOptional:`Матеріал (необов’язково)`,showing:`Показано {{filtered}} із {{total}} кольорів`,noMatch:`Жоден колір не відповідає вашому запиту`,empty:`Кольори в каталозі відсутні`,deleteColor:`Видалити колір`,deleteConfirm:`Ви впевнені, що хочете видалити "{{name}}"?`,resetCatalog:`Скинути каталог кольорів`,resetConfirm:`Скинути каталог до стандартних? Це видалить усі власні кольори.`,sync:`Синхронізувати`,starting:`Запуск…`,syncTooltip:`Синхронізація з FilamentColors.xyz (2000+ кольорів, може зайняти хвилину)`,loadFailed:`Не вдалося завантажити каталог кольорів`,fieldsRequired:`Необхідно вказати виробника, назву кольору та шістнадцятковий колір`,colorAdded:`Додано колір`,addFailed:`Не вдалося додати колір`,colorUpdated:`Колір оновлено`,updateFailed:`Не вдалося оновити колір`,colorDeleted:`Колір видалено`,deleteFailed:`Не вдалося видалити колір`,resetSuccess:`Каталог кольорів відновлено до типових значень`,resetFailed:`Не вдалося скинути каталог`,syncUpToDate:`Вже оновлено (кольори {{count}} перевірено)`,syncComplete:`Додано: {{added}}; уже існувало: {{skipped}}`,syncError:`Помилка синхронізації`,syncFailed:`Не вдалося синхронізувати з FilamentColors.xyz`,exported:`Експортовано кольорів: {{count}}`,imported:`Імпортовано: {{added}}; пропущено: {{skipped}}`,importFailed:`Не вдалося імпортувати: недійсний формат JSON.`,selectedCount:`Вибрано: {{count}}`,deleteSelected:`Видалити вибране`,bulkDeleteConfirm:`Ви впевнені, що бажаєте видалити кольори {{count}}?`,bulkDeleted:`Видалено кольорів: {{count}}`,bulkDeleteFailed:`Не вдалося видалити кольори`},dateFormat:`Формат дати`,dateFormatUs:`США (MM/DD/YYYY)`,dateFormatEu:`ЄС (DD/MM/YYYY)`,dateFormatIso:`ISO (РРРР-ММ-ДД)`,timeFormat:`Формат часу`,timeFormat12:`12 годин (15:30)`,timeFormat24:`24 години (15:30)`,defaultPrinter:`Принтер за умовчанням`,defaultPrinterDescription:`Попередньо вибирати цей принтер для вивантажень, повторного друку та інших операцій.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Використовуйте бічну панель, щоб змінити порядок елементів, скинути видимість і керувати спеціальними посиланнями.`,setDefault:`Установити за замовчуванням`,sidebarOrderSetDefaultHint:`За замовчуванням застосовує поточний порядок меню до користувачів, які не налаштували свій.`,sidebarDefaultSet:`Встановлено стандартний порядок меню.`,sidebarDefaultCleared:`Порядок меню за замовчуванням видалено.`,sidebarDefaultFailed:`Не вдалося встановити порядок меню за замовчуванням.`,reset:`Скинути`,darkMode:`Темний режим`,lightMode:`Світловий режим`,active:`(активний)`,background:`Фон`,accent:`Акцент`,style:`Стиль`,bgNeutral:`Нейтральний`,bgWarm:`Теплий`,bgCool:`круто`,bgOled:`OLED Чорний`,bgSlate:`Шиферно-блакитний`,bgForest:`Зелений ліс`,accentGreen:`Зелений`,accentTeal:`Чирок`,accentBlue:`Синій`,accentOrange:`Помаранчевий`,accentPurple:`Фіолетовий`,accentRed:`Червоний`,styleClassic:`класичний`,styleGlow:`Світіння`,styleVibrant:`Яскравий`,themeToggleHint:`Перемикайтеся між темним, світлим і системним режимами за допомогою значка на бічній панелі.`,progressInTitle:`Прогрес у вкладці`,progressInTitleDescription:`Показує відсоток активного друку та кільце прогресу на вкладці браузера.`,autoArchivePrints:`Автоматично архівувати друки`,autoArchiveDescription:`Автоматично зберігати файли 3MF після завершення друку`,saveThumbnailsDescription:`Витягніть і збережіть зображення попереднього перегляду з файлів 3MF.`,captureFinishPhotoDescription:`Зробіть фотографію з камери принтера після завершення друку. Bambuddy записує короткий проміжок часу під час друку, щоб фотографію можна було отримати з моменту, коли стіл опускається; файл уповільненої зйомки зберігається, якщо ви ввімкнули уповільнену зйомку для цього друку, інакше він автоматично видаляється після зйомки фотографії.`,finishPhotoRestorePlate:`Піднімати стіл для фінального знімка`,finishPhotoRestorePlateDescription:`Після завершення друку принтер опускає стіл приблизно на 100 мм, і готова модель опиняється нижче кадру камери. Bambuddy піднімає стіл назад трохи вище останнього надрукованого шару, робить знімок і знову опускає його. Пропускається, якщо висота друку невідома або в черзі є інше завдання.`,ffmpegNotInstalled:`ffmpeg не встановлено`,ffmpegRequired:`Для зйомки камерою потрібен ffmpeg. Встановіть його за допомогою <brew>brew install ffmpeg</brew> (macOS) або <apt>apt install ffmpeg</apt> (Linux).`,camera:`Камера`,cameraViewMode:`Режим перегляду камери`,cameraOverlayDescription:`Камера відкривається в накладці зі змінним розміром на головному екрані`,cameraWindowDescription:`Камера відкривається в окремому вікні браузера`,externalCamerasDescription:`Налаштуйте зовнішні камери замість вбудованої камери принтера. Підтримує потоки MJPEG, знімки RTSP, HTTP і камери USB (V4L2). Якщо ввімкнено, зовнішня камера використовується для перегляду в реальному часі та готових фотографій.`,cameraPlaceholderUsb:`Шлях пристрою (/dev/video0)`,cameraPlaceholderUrl:`Камера URL (rtsp://... або http://...)`,cameraTypeMjpeg:`Потік MJPEG`,cameraTypeRtsp:`RTSP Потік`,cameraTypeSnapshot:`HTTP Знімок`,cameraTypeUsb:`USB Камера (V4L2)`,cameraSnapshotUrl:`URL знімка (необов’язково)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`Одиночний кадр URL використовується для ескізів сповіщень, фінішних фотографій, шарових кадрів уповільненої зйомки та виявлення пластин. Уповільнена зйомка та виявлення пластин потребують окремого перемикача для кожного принтера — це URL є лише джерелом зображення, з якого вони беруть участь, коли активні. Залиште поле порожнім для запису з прямої трансляції вище. Корисно для камер go2rtc (/api/frame.jpeg) і IP із спеціальною кінцевою точкою знімка.`,cameraRotation:`Обертання`,test:`Тест`,connected:`Підключено`,disconnected:`Відключено`,currency:`Валюта`,defaultFilamentCost:`Вартість філаменту за замовчуванням (за кг)`,electricityCost:`Вартість електроенергії за kWh`,energyDisplayMode:`Режим відображення енергії`,energyModePrintDescription:`Інформаційна панель показує суму енергії, використаної під час друку`,energyModeTotalDescription:`На приладовій панелі показано енергію від розумних розеток протягом усього терміну служби`,fileManager:`Менеджер файлів`,createArchiveEntry:`Створити архівний запис під час друку`,createArchiveEntryDescription:`Під час друку з диспетчера файлів можна додатково створити запис архіву`,lowDiskSpaceWarning:`Попередження про брак місця на диску`,lowDiskSpaceDescription:`Показувати попередження, коли вільний простір на диску стає нижче цього порогу`,printerFirmware:`Прошивка принтера`,checkFirmwareDescription:`Перевірте наявність оновлень прошивки принтера від Bambu Lab`,bambuddySoftware:`Bambuddy Програмне забезпечення`,autoCheckDescription:`Автоматично перевіряти наявність нових версій під час запуску`,checkNow:`Перевір зараз`,updateAvailableVersion:`Доступне оновлення: v{{version}}`,releaseNotes:`Примітки до випуску`,updateViaDocker:`Оновити через Docker Написати:`,composeDirectory:`Каталог Compose`,composeDirectoryHint:`Каталог із вашим docker-compose.yml. Залиште порожнім, щоб не додавати cd.`,copyUpdateCommand:`Скопіювати команду оновлення`,updateViaHomeAssistant:`Оновленнями керує супервізор Home Assistant. Відкрийте «Налаштування» → «Додатки» → Bambuddy у Home Assistant, щоб установити нову версію.`,updateViaWindowsInstaller:`Інсталяції Windows оновлюються шляхом повторного запуску інсталятора. Завантажте нову версію нижче — ваші дані, налаштування та принтери збережуться.`,downloadWindowsInstaller:`Завантажити інсталятор для v{{version}}`,installUpdate:`Встановити оновлення`,latestVersionRunning:`Ви використовуєте останню версію`,failedToCheckUpdates:`Не вдалося перевірити наявність оновлень: {{error}}`,backupRestore:`Резервне копіювання та відновлення`,backupRestoreDescription:`Експорт /import налаштувань і конфігурація GitHub резервного копіювання`,goToBackup:`Перейдіть до Резервного копіювання`,externalUrl:`Зовнішній URL`,externalUrlDescription:`Зовнішній URL, де Bambuddy доступний. Використовується для зображень сповіщень і зовнішньої інтеграції.`,bambuddyUrl:`Bambuddy URL`,externalUrlHint:`Включити протокол і порт (наприклад, http://192.168.1.100:8000)`,ftpRetry:`FTP Спробуйте ще раз`,ftpRetryDescription:`Повторювати операції FTP за ненадійного Wi-Fi принтера. Застосовується до завантаження 3MF і таймлапсів, вивантаження завдань друку та оновлення прошивки.`,autoRetryDescription:`Автоматично повторити невдалі операції FTP.`,retryAttempts:`Повторні спроби`,retryDelay:`Затримка повторної спроби`,connectionTimeout:`Час очікування підключення`,time_one:`час {{count}}.`,time_other:`{{count}} разів`,second_one:`{{count}} секунда`,second_other:`{{count}} секунд`,nSeconds:`{{count}} секунд`,increaseForWeakWifi:`Підвищення для принтерів із слабким WiFi`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Підключіться до Home Assistant, щоб керувати розумними розетками через REST API HA. Підтримує об’єкти switch, light, input_boolean і script.`,homeAssistantUrl:`Home Assistant URL`,longLivedAccessToken:`Довгостроковий токен доступу`,haTokenHint:`Створіть токен у HA: Профіль → Довгострокові токени доступу → Створити токен`,connectionSuccessful:`Підключення успішне`,connectionFailed:`Збій підключення`,haConnectionSuccess:`Успішно підключено до Home Assistant.`,haConnectionFailed:`Не вдалося підключитися до Home Assistant.`,mqttPublishing:`MQTT Видавництво`,mqttDescription:`Публікуйте події BamBuddy зовнішньому брокеру MQTT для інтеграції з Node-RED, Home Assistant та іншими системами автоматизації.`,mqttEnableDescription:`Публікувати події зовнішньому MQTT брокеру`,brokerHostname:`Ім’я хоста брокера`,port:`Порт`,usernameOptional:`Ім’я користувача (необов’язково)`,passwordOptional:`Пароль (необов’язково)`,topicPrefix:`Префікс теми`,topicPrefixHint:`Теми будуть: {{prefix}}/printers/<serial>/status тощо.`,prometheusMetrics:`Prometheus Метрики`,prometheusEndpointDescription:`Показати показники принтера на <code>/api/v1/metrics</code> для моніторингу Prometheus/Grafana.`,bearerTokenOptional:`Токен Bearer (необов’язково)`,bearerTokenHint:`Якщо встановлено, запити мають містити <code>Авторизація: носій <token></code>`,metricsConnectionStatus:`Статус підключення`,metricsPrinterState:`Стан принтера (неактивний /printing/etc)`,metricsPrintProgress:`Прогрес друку 0-100%`,metricsBedTemp:`Температура столу`,metricsNozzleTemp:`Температура сопла`,metricsPrintsTotal:`Загальна кількість друків за результатами`,metricsMore:`...і багато іншого (шари, вентилятори, черга, використання філаментів)`,smartPlugsDescription:`Підключіть розумні розетки (Tasmota або Home Assistant), щоб автоматизувати керування живленням і відстежувати споживання електроенергії вашими принтерами.`,allOn:`Все включено`,allOff:`Все вимкнено`,addSmartPlug:`Додати розумну розетку`,energySummary:`Відновити енергетики`,currentPower:`Поточна потужність`,plugsOnline:`Розумні розетки в мережі: {{reachable}}/{{total}}`,today:`Сьогодні`,yesterday:`вчора`,total:`Всього`,enablePlugsForSummary:`Увімкніть розетки, щоб переглянути підсумок енергії`,addNotificationProvider:`додати`,systemBadge:`(Система)`,creating:`Створення...`,changing:`Зміна...`,deleteUserAndItems:`Видалити користувача ТА його елементи`,deleteUserKeepItems:`Видалити користувача, зберегти елементи (стати без власника)`,ok:`добре`,twoFa:{totpTitle:`Програма Authenticator (TOTP)`,totpDesc:`Використовуйте програму автентифікації, наприклад Google Authenticator Aegis або Authy.`,emailOtpTitle:`Одноразовий код електронною поштою`,emailOtpDesc:`Надішліть одноразовий код на {{email}} під час входу.`,emailOtpNoEmail:`Щоб увімкнути цей метод, додайте адресу електронної пошти до свого облікового запису.`,addEmailFirst:`У вашому обліковому записі немає адреси електронної пошти. Попросіть адміністратора додати її, перш ніж вмикати одноразові коди електронною поштою.`,setupTotp:`Налаштувати додаток Authenticator`,setupAuthApp:`Налаштувати додаток Authenticator`,setupInstructions:`Відскануйте наведений нижче QR-код за допомогою програми автентифікації, а потім підтвердьте кодом.`,manualEntry:`Не можете сканувати? Введіть цей секрет вручну:`,scannedContinue:`Код відскановано — продовжити`,enterCodeToConfirm:`Введіть 6-значний код із програми автентифікації, щоб підтвердити налаштування.`,activate:`Активувати`,disableTotp:`Вимкнути автентифікатор`,disableConfirmHint:`Введіть дійсний код TOTP або резервний код, щоб вимкнути автентифікатор.`,totpDisabled:`Програму Authenticator вимкнено.`,emailOtpEnabled:`Одноразові коди електронною поштою ввімкнено.`,emailOtpDisabled:`Одноразові коди електронною поштою вимкнено.`,smtpRequired:`Спочатку налаштуйте та перевірте параметри SMTP.`,invalidCode:`Невірний код. Спробуйте ще раз.`,enableEmailOtp:`Увімкнути одноразові коди електронною поштою`,disableEmailOtp:`Вимкнути одноразові коди електронною поштою`,emailSetupEnterCode:`Код підтвердження надіслано на вашу адресу електронної пошти. Введіть його нижче, щоб підтвердити доступ до цієї поштової скриньки.`,verifyAndEnable:`Перевірити й увімкнути`,emailDisablePasswordHint:`Введіть пароль свого облікового запису, щоб підтвердити вимкнення OTP електронної пошти.`,passwordPlaceholder:`Введіть свій пароль`,backupCodesTitle:`Зберегти резервні коди`,backupCodesWarning:`Збережіть ці коди в безпечному місці. Кожен код можна використати лише один раз, і він більше не відображатиметься.`,backupCodesRemaining:`Залишилося резервних кодів: {{count}}`,savedCodes:`Я зберіг свої коди`,regenBackup:`Створити нові резервні коди`,regenBackupHint:`Введіть поточний код TOTP, щоб створити 10 нових резервних кодів. Усі існуючі резервні коди стануть недійсними.`,newBackupCodes:`Нові резервні коди`,linkedAccounts:`Пов’язані облікові записи SSO.`,linkedAccountsDesc:`Ці зовнішні постачальники ідентифікаційної інформації пов’язані з вашим обліковим записом.`,oidcUnlinked:`Обліковий запис від’єднано.`},sessionPolicy:{title:`Політика сеансу`,description:`Максимальна тривалість сеансу для входу нових користувачів. Уже випущені токени зберігають початковий термін дії.`,preset24h:`24 години`,preset7d:`7 днів`,preset30d:`30 днів`,customHoursLabel:`Тривалість користувацького сеансу в годинах`,hoursSuffix:`години`,warning:`Довші сеанси знижують захист від автоматичного виходу. Рекомендовано лише для надійних розгортань для одного користувача.`},oidc:{title:`Постачальники SSO / OIDC`,desc:`Налаштуйте постачальників OpenID Connect, щоб дозволити єдиний вхід через зовнішніх постачальників ідентифікації.`,addProvider:`Додати постачальника`,newProvider:`Новий постачальник`,empty:`Постачальників OIDC ще не налаштовано.`,created:`Постачальник створено.`,updated:`Постачальника оновлено.`,deleted:`Постачальника видалено.`,refreshIcon:`Значок оновлення`,removeIcon:`Видалити значок`,iconRefreshed:`Значок оновлено.`,iconRemoved:`Значок видалено.`,iconFetchFailed:`Не вдалося отримати значок за URL постачальника.`,deleteTitle:`Видалити постачальника`,deleteMessage:`Видалити «{{name}}»? Усі пов’язані облікові записи користувачів буде від’єднано.`,form:{name:`Відображуване ім’я`,issuerUrl:`URL емітента`,clientId:`ID клієнта`,clientSecret:`Секрет клієнта`,scopes:`Області доступу`,iconUrl:`URL значка (необов’язково)`,enabled:`Увімкнено`,autoCreate:`Автоматичне створення користувачів`,autoCreateDesc:`Автоматично створювати локальний обліковий запис під час першого входу.`,autoLink:`Автоматичне пов’язування наявних облікових записів`,autoLinkDesc:`Автоматично пов’язувати наявні локальні облікові записи за збігом адреси електронної пошти під час першого входу.`,secretHint:`залиште порожнім, щоб зберегти поточне значення`,secretPlaceholder:`новий секрет`,emailClaim:`Поле електронної пошти`,emailClaimDesc:`Поле JWT, що використовується як адреса електронної пошти. Для Azure Entra ID, який не надсилає email_verified, використовуйте preferred_username або upn. Указуйте лише назви надійних полів.`,emailClaimPlaceholder:`email`,emailClaimCustomClaimAutoLinkWarning:`Власне поле можна безпечно використовувати для автоматичного пов’язування, лише якщо його значенням керує адміністратор організації, наприклад upn або preferred_username в Azure Entra ID. Не вмикайте автоматичне пов’язування, якщо IdP дозволяє користувачам самостійно задавати це поле.`,requireEmailVerified:`Вимагати підтвердження електронної пошти`,requireEmailVerifiedDesc:`Приймати поле електронної пошти лише тоді, коли постачальник позначив адресу як підтверджену.`,requireEmailVerifiedWarning:`Попередження: адресу електронної пошти буде прийнято навіть без підтвердження. Використовуйте це лише з надійними постачальниками.`,requireEmailVerifiedAutoLink:`Щоб змінити це налаштування, спочатку вимкніть автоматичне пов’язування.`,defaultGroup:`Група за замовчуванням`,defaultGroupDesc:`Група, яку призначають автоматично створеним користувачам. Якщо її не задано, використовується група «Глядачі».`,defaultGroupViewersFallback:`Глядачі (за замовчуванням)`,autologin:`Автовхід`,autologinDesc:`Одразу перенаправляти неавтентифікованих відвідувачів до цього постачальника. Автоматичний вхід можна ввімкнути лише для одного постачальника.`}},encryption:{title:`Стан шифрування MFA`,enabledFromEnv:`Шифрування даних у сховищі ввімкнено — ключ отримано зі змінної середовища MFA_ENCRYPTION_KEY`,enabledFromFile:`Шифрування даних у сховищі ввімкнено — ключ завантажено з каталогу даних`,enabledGenerated:`Шифрування даних у сховищі ввімкнено з автоматично створеним ключем`,notConfigured:`Шифрування даних у сховищі не налаштовано`,notConfiguredDesc:`Секрети TOTP і client_secret постачальників OIDC зберігаються як відкритий текст. Установіть MFA_ENCRYPTION_KEY або перезапустіть Bambuddy з доступним для запису каталогом даних, щоб ключ було створено автоматично.`,allEncrypted:`Усі секрети MFA зашифровано у сховищі.`,legacyRowsLabel:`Застарілі рядки відкритого тексту`,encryptedRowsLabel:`Зашифровані рядки`,legacyRowsWarning:`Виявлено незашифрованих застарілих записів: {{count}}. Повторно збережіть постачальника OIDC або заново зареєструйте застосунок автентифікації користувача, щоб перенести дані до зашифрованого сховища.`,backupHint:`Автоматично згенерований ключ зберігається в DATA_DIR/.mfa_encryption_key і включено до локальних резервних ZIP-файлів. Зберігайте свої резервні копії в безпеці або явно встановіть MFA_ENCRYPTION_KEY.`,decryptionBrokenTitle:`Відсутній ключ шифрування`,decryptionBrokenError:`Не вдається розшифрувати записів: {{count}}, оскільки ключ шифрування більше недоступний. Для відновлення поверніть попередній MFA_ENCRYPTION_KEY або DATA_DIR/.mfa_encryption_key.`,migrationErrorWarning:`{{count}} застарілих рядків не вдалося повторно зашифрувати під час запуску. Перевірте журнали сервера та перезапустіть Bambuddy, щоб повторити спробу.`},pipelineLimits:{title:`Межі конвеєра слайсера`,maxCopiesLabel:`Максимальна кількість копій за один запуск`,maxCopiesDesc:`Верхня межа копій, які оператори можуть запитувати під час запуску конвеєра. Обмеження на стороні сервера становить 1000.`},pipelines:{title:`Конвеєри слайсера`,subtitle:`Багаторазові набори профілів — принтер, процес, філаменти й тип столу. Збережіть набір у вікні нарізання та застосовуйте його до наступного файлу одним натисканням.`,loading:`Завантаження конвеєрів…`,loadError:`Не вдалося завантажити конвеєри.`,confirmDelete:`Видалити цей конвеєр? Це неможливо скасувати.`,staleWarning:`Одного або кількох пов’язаних профілів більше не існує. Щоб виправити це, повторно збережіть конвеєр у вікні нарізання.`,empty:{title:`Конвеєрів ще немає.`,howto:`Відкрийте вікно нарізання для будь-якого файлу, виберіть принтер, процес, філаменти й тип столу, а потім натисніть «Зберегти як конвеєр». Збережені конвеєри з’являться тут.`},field:{name:`Назва конвеєра`,description:`опис`,targetPrinter:`Цільовий принтер`,noTarget:`— Немає цілі —`,targetKind:`Цільовий тип`,targetKindSpecific:`Конкретний принтер`,targetKindClass:`Клас принтера`,targetModelClass:`Модель принтера`,fanoutStrategy:`Стратегія розподілу`,fanout:{max_parallel:`Максимально паралельно — розподіляти між усіма відповідними вільними принтерами`,round_robin:`По колу — почергово використовувати відповідні принтери`,fill_one_first:`Спочатку один принтер — призначити всі копії одному принтеру`},fanoutShort:{max_parallel:`паралельний`,round_robin:`по колу`,fill_one_first:`спочатку один`}},action:{save:`зберегти`,cancel:`Скасувати`,rename:`Перейменувати`,delete:`Видалити`},slot:{printer:`Принтер`,process:`процес`,filament:`Філамент`,filamentN:`Філамент {{n}}`,filamentAll:`Усі {{n}} слотів`,bed:`Стіл`},group:{profiles:`Профілі`,filaments:`філаменти`},searchPlaceholder:`Шукати конвеєри…`,filterTargetType:`Фільтрувати за типом цілі`,filterTarget:`Фільтрувати за ціллю`,filter:{all:`Всі цілі`,noTarget:`Ціль не встановлена`,count:`{{shown}} / {{total}}`,noMatches:`Жоден конвеєр не відповідає поточним фільтрам.`},toast:{saved:`Конвеєр збережено`,saveFailed:`Не вдалося зберегти`,deleted:`Конвеєр видалено`,deleteFailed:`Не вдалося видалити`},noTargetHint:`Щоб запустити конвеєр, виберіть цільовий принтер`,noTargetWarning:`Перед запуском цього конвеєра встановіть цільовий принтер.`,runs:{lastRun:`Останній запуск`,status:{queued:`в черзі`,slicing:`нарізка`,dispatching:`надсилання`,in_progress:`друк`,completed:`завершено`,failed:`не вдалося`,partial_failure:`частково невдало`,cancelled:`скасовано`}}}},notification:{printStarted:{title:`Друк розпочато`,body:`{{printer}}: розпочато друк {{filename}}`},printCompleted:{title:`Друк завершено`,body:`{{printer}}: {{filename}} завершено успішно`},printFailed:{title:`Помилка друку`,body:`{{printer}}: не вдалося надрукувати {{filename}}`},printStopped:{title:`Друк зупинено`,body:`{{printer}}: {{filename}} було зупинено`},printProgress:{title:`Перебіг друку`,body:`{{printer}}: {{filename}} виконано {{percent}}%.`},printerOffline:{title:`Принтер не в мережі`,body:`{{printer}} не в мережі`},printerError:{title:`Помилка принтера`,body:`{{printer}}: {{error}}`},filamentLow:{title:`Закінчується філамент`,body:`{{printer}}: філамент майже закінчився`},maintenanceDue:{title:`Технічне обслуговування`,body:`{{printer}}: потрібна увага — {{items}}`}},errors:{generic:`Щось пішло не так`,networkError:`Помилка мережі. Перевірте підключення.`,notFound:`Не знайдено`,unauthorized:`Доступ не авторизовано`,serverError:`Помилка сервера`,validationError:`Перевірте введені дані`,printerConnectionFailed:`Не вдалося підключитися до принтера`,saveFailed:`Не вдалося зберегти зміни`,deleteFailed:`Не вдалося видалити`,loadFailed:`Не вдалося завантажити дані`},hmsErrors:{title:`Помилки - {{name}}`,noErrors:`Помилок немає`,viewOnWiki:`Переглянути на Bambu Lab Wiki`,mqttVerifyFailedRemedy:`Увімкніть режим розробника на принтері, перезавантажте принтер і запустіть завдання знову.`,unknownCode:`Невідомий код HMS — подробиці дивіться у вікі Bambu Lab.`,clearInstructions:`Усуньте помилки на принтері, щоб вони зникли тут.`,clearErrors:`Очистити помилки`,clearSuccess:`Помилки HMS видалено`,clearFailed:`Не вдалося видалити помилки HMS`,actionSuccess:`Команду надіслано принтеру`,actionFailed:`Не вдалося надіслати дію`,runoutExpectedSlot:`Філамент закінчився в {{ranOut}}. Тепер принтер очікує сумісний філамент у {{expected}}. Вставте котушку в {{expected}}, а потім виберіть «Повторити».`,runoutExpectedSlotOnly:`Принтер очікує сумісний філамент у {{expected}}. Вставте туди котушку, а потім виберіть «Повторити».`,runoutSlotUnknown:`Філамент закінчився, тому друк призупинено. Bambuddy не може визначити, якого слота тепер очікує принтер — перевірте екран принтера.`,actions:{RESUME_PRINTING:`Відновити друк`,RESUME_PRINTING_DEFECTS:`Відновити (допустимі недоліки)`,RESUME_PRINTING_PROBELM_SOLVED:`Відновити (проблему вирішено)`,STOP_PRINTING:`Зупинити друк`,CHECK_ASSISTANT:`Перевірити помічника`,FILAMENT_EXTRUDED:`Філамент екструдовано — продовжити`,RETRY_FILAMENT_EXTRUDED:`Ще не екструдовано — повторити`,CONTINUE:`Готово, продовжити`,LOAD_VIRTUAL_TRAY:`Завантажити філамент`,OK_BUTTON:`OK`,FILAMENT_LOAD_RESUME:`Філамент завантажено, відновити`,JUMP_TO_LIVEVIEW:`Перейти до перегляду наживо`,NO_REMINDER_NEXT_TIME:`Більше не нагадувати`,REFRESH_NOZZLE:`Перевірити знову`,IGNORE_NO_REMINDER_NEXT_TIME:`Ігнорувати. Не нагадувати наступного разу`,IGNORE_RESUME:`Ігнорувати й відновити друк`,PROBLEM_SOLVED_RESUME:`Проблему вирішено — відновити друк`,TURN_OFF_FIRE_ALARM:`Зрозуміло, вимкнути пожежну сигналізацію`,RETRY_PROBLEM_SOLVED:`Повторити (проблему вирішено)`,CANCLE:`Скасувати`,STOP_DRYING:`Зупинити сушіння`,PROCEED:`Продовжити`,OK_JUMP_RACK:`OK`,ABORT:`Перервати`,DISABLE_PURIFICATION:`Вимкнути очищення для цього друку`,DONT_REMIND_NEXT_TIME:`Більше не нагадувати`,DBL_CHECK_CANCEL:`Скасувати`,DBL_CHECK_DONE:`Готово`,DBL_CHECK_RETRY:`Повторити`,DBL_CHECK_RESUME:`Відновити`,DBL_CHECK_OK:`Підтвердити`,REMOVE_CLOSE_BTN:`Закрити`}},mqttDebug:{title:`Журнал налагодження MQTT`,searchPlaceholder:`Шукати тему або корисне навантаження…`,noMessages:`Ще не зареєстровано жодного повідомлення`,startLoggingHint:`Натисніть «Почати журналювання», щоб розпочати запис MQTT повідомлень`,noMessagesMatch:`Жодне повідомлення не відповідає вашому фільтру`,adjustFilterHint:`Спробуйте змінити критерії пошуку або фільтра`,incoming:`Вхідні`,outgoing:`Вихідні`,loggingStopped:`Запис припинено`,loggingActive:`Логування активне – повідомлення автоматично оновлюватимуться`,startLogging:`Розпочати журналювання`,stopLogging:`Зупинити журналювання`,clearLog:`Очистити журнал`,topic:`Тема`,timestamp:`Мітка часу`,direction:`Напрямок`,all:`Усі`},printerFiles:{zipStarted_one:`Розпочато завантаження ZIP для {{count}} файлу`,zipStarted_other:`Розпочато завантаження ZIP для {{count}} файлів`,zipPartial:`Розпочато завантаження ZIP із {{successful}} з {{total}} файлів; решту отримати не вдалося`,downloadFailed:`Помилка завантаження: {{error}}`,unknownError:`Невідома помилка`,shiftSelectHint:`Клацніть із Shift, щоб вибрати діапазон`,selectFile:`Вибрати {{name}}`,deselectFile:`Зняти вибір із {{name}}`,title:`Менеджер файлів`,storageUsed:`Використовується:`,storageFree:`Вільно:`,filterPlaceholder:`Фільтр файлів...`,deleteButton:`Видалити`,deleteFiles:`Видалити файли {{count}}.`,deleteFileConfirm:`Видалити "{{name}}"? Це неможливо скасувати.`,deleteFilesConfirm:`Видалити вибрані файли {{count}}? Це неможливо скасувати.`,noFiles:`Немає файлів на принтері`,printerUnavailable:`Файлова служба принтера недоступна. Повторіть спробу, коли принтер буде доступний.`,loadingFiles:`Завантаження файлів...`,failedToLoad:`Не вдалося завантажити файли`,toast:{filesDeleted:`Видалено файлів: {{count}}`,deleteFailed:`Не вдалося видалити: {{error}}`}},confirm:{delete:`Ви впевнені, що хочете це видалити?`,unsavedChanges:`У вас є незбережені зміни. Ви впевнені, що хочете піти?`,clearQueue:`Ви впевнені, що бажаєте очистити чергу?`},login:{title:`Вхід у Bambuddy`,subtitle:`Увійти у свій обліковий запис`,username:`Ім’я користувача`,usernamePlaceholder:`Введіть своє ім’я користувача`,usernameOrEmail:`Ім’я користувача або електронна пошта`,usernameOrEmailPlaceholder:`Ім’я користувача або електронна пошта`,password:`Пароль`,passwordPlaceholder:`Введіть свій пароль`,signIn:`Увійти`,signingIn:`Вхід...`,rememberMe:`Запам’ятати мене`,forgotPassword:`Забули пароль?`,autologinFailed:`Помилка автоматичного входу SSO. Щоб продовжити, виберіть постачальника нижче.`,localDisabledNotice:`Локальний вхід вимкнено. Використовуйте одного з наведених нижче постачальників SSO.`,loginSuccess:`Успішно ввійшли`,loginFailed:`Помилка входу`,enterCredentials:`Будь ласка, введіть ім’я користувача та пароль`,enterEmail:`Будь ласка, введіть адресу електронної пошти`,oidcLoginFailed:`Не вдалося ввійти через OIDC`,oidcErrors:{providerError:`Постачальник ідентифікації повернув помилку`,missingParameters:`У зворотному виклику OIDC відсутні необхідні параметри`,invalidState:`Стан OIDC недійсний або вже використовувався`,stateExpired:`OIDC сеанс входу закінчився — спробуйте ще раз`,providerNotFound:`OIDC постачальника не знайдено`,discoveryFailed:`Не вдалося отримати документ конфігурації OIDC`,invalidDiscovery:`Документ конфігурації OIDC недійсний`,networkError:`Помилка мережі під час обміну токена OIDC`,badResponse:`Неочікувана відповідь під час обміну токеном OIDC.`,noIdToken:`Постачальник OIDC не повернув ID-токен`,validationFailed:`Не вдалося перевірити токен OIDC`,nonceMismatch:`Не збігається nonce OIDC — можлива атака повторного використання`,missingSubClaim:`У токені OIDC відсутнє поле sub`,noLinkedAccount:`Із цим ідентифікатором OIDC не пов’язано жодного локального облікового запису`,accountInactive:`Ваш акаунт неактивний`,userResolutionFailed:`Не вдалося визначити ваш обліковий запис`,internalError:`Під час входу в систему OIDC сталася внутрішня помилка`,tokenExchangeFailed:`Помилка обміну токеном OIDC.`},forgotPasswordTitle:`Забули пароль`,forgotPasswordMessage:`Якщо ви забули свій пароль, зверніться до системного адміністратора, щоб скинути його.`,forgotPasswordEmailMessage:`Введіть адресу електронної пошти, і ми надішлемо вам новий пароль.`,emailAddress:`Адреса електронної пошти`,emailPlaceholder:`your.email@example.com`,cancel:`Скасувати`,sending:`Надсилання...`,sendResetEmail:`Надіслати лист для скидання пароля`,howToReset:`Як скинути пароль:`,resetStep1:`Зверніться до адміністратора Bambuddy.`,resetStep2:`Попросіть скинути ваш пароль у розділі «Керування користувачами»`,resetStep3:`Вони можуть встановити для вас новий тимчасовий пароль`,resetStep4:`Увійдіть із новим паролем і змініть його в налаштуваннях`,gotIt:`Зрозуміло`,resetPassword:{title:`Встановити новий пароль`,subtitle:`Введіть і підтвердьте свій новий пароль нижче.`,newPassword:`Новий пароль`,newPasswordPlaceholder:`Мінімум 8 символів`,confirmPassword:`Підтвердити пароль`,confirmPasswordPlaceholder:`Повторіть новий пароль`,saving:`Збереження…`,submit:`Встановити новий пароль`,backToLogin:`Назад до входу`,passwordsDoNotMatch:`Паролі не збігаються`,passwordTooShort:`Пароль має бути не менше 8 символів`,resetFailed:`Помилка скидання пароля. Можливо, термін дії посилання закінчився.`},twoFA:{title:`Двофакторна автентифікація`,subtitle:`Ваш обліковий запис захищено 2FA. Введіть код підтвердження нижче.`,methodAuthenticator:`Програма автентифікатора`,methodEmail:`Код електронної пошти`,methodBackup:`Резервний код`,instructionsTotp:`Відкрийте програму автентифікації та введіть 6-значний код для Bambuddy.`,instructionsEmail:`На вашу електронну адресу надіслано 6-значний код. Термін дії закінчується через 10 хвилин.`,instructionsEmailNotSent:`Натисніть кнопку нижче, щоб отримати код підтвердження електронною поштою.`,instructionsBackup:`Введіть один із ваших 8-символьних резервних кодів відновлення. Кожен код можна використати лише один раз.`,sendCodeButton:`Надіслати код електронною поштою`,sendingCode:`Надсилання...`,resendCode:`Повторно надіслати код`,codeLabel:`Код підтвердження`,backupCodeLabel:`Резервний код`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Підтвердити`,verifyingButton:`Перевірка...`,backToLogin:`← Назад до входу`,orContinueWith:`або продовжити`,signInWith:`Увійти за допомогою {{provider}}`,enterCode:`Будь ласка, введіть код підтвердження`,sendCodeFailed:`Не вдалося надіслати код підтвердження`,invalidCode:`Невірний код. Спробуйте ще раз.`}},setup:{title:`Налаштування Bambuddy`,subtitle:`Налаштуйте автентифікацію для свого екземпляра Bambuddy.`,enableAuth:`Увімкнути автентифікацію`,adminAccount:`Обліковий запис адміністратора`,adminAccountDesc:`Якщо користувачі-адміністратори вже існують, автентифікацію буде ввімкнено за допомогою наявних облікових записів адміністраторів. Залиште поля нижче порожніми, щоб використовувати наявних адміністраторів, або введіть нові облікові дані, щоб створити нового користувача адміністратора.`,adminUsername:`Ім’я користувача адміністратора`,adminPassword:`Пароль адміністратора`,optionalIfAdminExists:`(необов’язково, якщо є користувачі з правами адміністратора)`,adminUsernamePlaceholder:`Введіть ім’я користувача адміністратора (необов’язково)`,adminPasswordPlaceholder:`Введіть пароль адміністратора (необов’язково)`,confirmPassword:`Підтвердити пароль`,confirmPasswordPlaceholder:`Підтвердити пароль адміністратора`,settingUp:`Налаштування...`,completeSetup:`Завершити налаштування`,toast:{authEnabledAdminCreated:`Увімкнено автентифікацію та створено адміністратора`,authEnabledExistingAdmins:`Увімкнено автентифікацію за допомогою наявних користувачів адміністратора`,setupCompleted:`Налаштування завершено`,enterBothCredentials:`Будь ласка, введіть ім’я користувача та пароль адміністратора або залиште обидва поля порожніми, щоб використовувати наявних користувачів адміністратора`,passwordsDoNotMatch:`Паролі не збігаються`,passwordTooShort:`Пароль має бути не менше 6 символів`}},changePassword:{title:`Змінити пароль`,currentPassword:`Поточний пароль`,currentPasswordPlaceholder:`Введіть поточний пароль`,newPassword:`Новий пароль`,newPasswordPlaceholder:`Введіть новий пароль (мінімум 6 символів)`,confirmPassword:`Підтвердити новий пароль`,confirmPasswordPlaceholder:`Підтвердити новий пароль`,passwordsDoNotMatch:`Паролі не збігаються`,passwordTooShort:`Пароль має бути не менше 6 символів`,changing:`Зміна...`,success:`Пароль успішно змінено`,failed:`Не вдалося змінити пароль`},plateAlert:{title:`Друк призупинено!`,message:`Об’єкти, виявлені на будівельній пластині. Друк було автоматично призупинено. Очистіть пластину та відновіть друк.`,understand:`Я розумію`},camera:{title:`Вид з камери`,invalidPrinterId:`Недійсний ідентифікатор принтера`,live:`Наживо`,snapshot:`знімок`,restartStream:`Перезапустити потік`,refreshSnapshot:`Оновити знімок`,fullscreen:`Повний екран`,exitFullscreen:`Вийти з повноекранного режиму`,connectingToCamera:`Підключення до камери...`,capturingSnapshot:`Зйомка знімка...`,connectionLost:`З’єднання втрачено`,connectionFailed:`Помилка підключення камери`,reconnecting:`Повторне підключення через {{countdown}}с... (спроба {{attempt}}/{{max}})`,reconnectNow:`Повторно підключіться зараз`,cameraUnavailable:`Камера недоступна`,cameraUnavailableDesc:`Переконайтеся, що принтер увімкнено та підключено.`,noCamera:`Камера недоступна`,retry:`Повторити`,cameraStream:`Потік камери`,zoomOut:`Зменшити масштаб`,zoomIn:`Збільшити`,resetZoom:`Скинути масштаб`,recording:`Запис`,startRecording:`Почати запис`,stopRecording:`Зупинити запис`,chamberLight:`Перемкнути освітлення камери`,unavailable:`Камера недоступна`,diagnose:{button:`Діагностувати`,modalTitle:`Діагностика камери`,running:`Виконується діагностика...`,runFailed:`Не вдалося запустити діагностику: {{error}}`,retry:`Запустити знову`,stage:{tcp_reachable:`Доступність мережі`,first_frame:`Захоплення кадру`,live_stream_active:`Активна пряма трансляція`},summary:{all_ok:`Камера працює. Діагностика пройшла всі етапи успішно.`,live_stream_active_healthy:`Камера зараз транслює з останніми кадрами — перевірка не потрібна.`,printer_unreachable:`Принтер недоступний. Перевірте адресу IP, підключення до мережі та чи принтер увімкнено.`,camera_port_closed:`Принтер доступний, але порт камери закритий. Переконайтеся, що в налаштуваннях принтера ввімкнено лише режим LAN і режим розробника.`,no_frame:`Підключено до камери, але кадри не отримано. Повторіть спробу або перевірте, чи камеру ввімкнено в налаштуваннях принтера.`,unknown_failure:`Не вдалося діагностувати камеру з невідомої причини. Подробиці перевірте в журналі підтримки.`},meta:{protocol:`Протокол`,port:`Порт`,profile:`Профіль`}}},groups:{title:`Керування групами`,subtitle:`Керуйте групами дозволів для контролю доступу`,backToSettings:`Назад до налаштувань`,createGroup:`Створити групу`,noPermission:`Ви не маєте дозволу на доступ до цієї сторінки.`,system:`система`,noDescription:`Без опису`,usersCount:`{{count}} користувачів`,permissionsCount:`Дозволів: {{count}}`,edit:`Редагувати`,delete:`Видалити`,toast:{created:`Групу створено успішно`,updated:`Групу успішно оновлено`,deleted:`Групу успішно видалено`,enterGroupName:`Будь ласка, введіть назву групи`},modal:{editGroup:`Редагувати групу`,createGroup:`Створити групу`,cancel:`Скасувати`,saving:`Збереження...`,creating:`Створення...`,saveChanges:`Зберегти зміни`},form:{groupName:`Назва групи`,groupNamePlaceholder:`Введіть назву групи`,systemGroupWarning:`Назви системних груп не можна змінювати`,description:`опис`,descriptionPlaceholder:`Введіть опис (необов’язково)`,permissions:`Дозволи (вибрано {{count}})`},deleteModal:{title:`Видалити групу`,message:`Ви впевнені, що хочете видалити цю групу? Користувачі цієї групи втратять ці дозволи.`,confirm:`Видалити групу`},editor:{title:`Редагувати групу`,createTitle:`Створити групу`,search:`Шукати дозволи...`,selectAll:`Вибрати усі`,clearAll:`Очистити все`,permissionsSelected:`Вибрано: {{count}}`,noResults:`Немає дозволів, що відповідають вашому пошуку`,websocketHint:`Необхідний для оновлень у реальному часі. Без нього інтерфейс повертається до періодичного опитування.`}},users:{title:`Керування користувачами`,subtitle:`Керуйте користувачами та їхнім доступом до вашого екземпляра Bambuddy.`,backToSettings:`Назад до налаштувань`,createUser:`Створити користувача`,noPermission:`Ви не маєте дозволу на доступ до цієї сторінки.`,admin:`адмін`,noGroups:`Немає груп`,active:`Активний`,inactive:`Неактивний`,edit:`Редагувати`,delete:`Видалити`,system:`система`,noGroupsAvailable:`Немає доступних груп`,table:{username:`Ім’я користувача`,groups:`Групи`,status:`Статус`,actions:`Дії`},toast:{created:`Користувача створено успішно`,updated:`Користувача успішно оновлено`,deleted:`Користувача успішно видалено`,fillRequired:`Будь ласка, заповніть усі необхідні поля`,passwordsDoNotMatch:`Паролі не збігаються`,passwordTooShort:`Пароль має бути не менше 6 символів`,ldapProvisioned:`Користувача LDAP «{{username}}» підготовлено`},modal:{createUser:`Створити користувача`,editUser:`Редагувати користувача`,cancel:`Скасувати`,creating:`Створення...`,saving:`Збереження...`,saveChanges:`Зберегти зміни`,advancedAuthSubtitle:`з розширеною автентифікацією`,tabsAriaLabel:`Джерело користувача`,localTab:`Локальний`,ldapTab:`LDAP`,ldapSearchLabel:`Пошук у каталозі`,ldapSearchPlaceholder:`Введіть ім’я користувача, ім’я або електронну адресу...`,ldapMinChars:`Введіть принаймні 2 символи для пошуку`,ldapTypeToSearch:`Почніть вводити текст для пошуку в каталозі LDAP.`,ldapSearching:`Пошук у каталозі...`,ldapNoResults:`У каталозі немає відповідних користувачів`,ldapSearchError:`Помилка пошуку каталогу. Перевірте стан сервера LDAP.`,ldapAlreadyProvisioned:`Уже підготовлено`,ldapSelectedLabel:`Вибране`,ldapProvision:`Підготувати користувача`,ldapProvisioning:`Підготовка...`,ldapErrorProvision:`Не вдалося підготувати користувача. Перевірте стан сервера LDAP і повторіть спробу.`},form:{username:`Ім’я користувача`,usernamePlaceholder:`Введіть ім’я користувача`,email:`Електронна пошта`,emailPlaceholder:`user@example.com`,password:`Пароль`,passwordPlaceholder:`Введіть пароль`,confirmPassword:`Підтвердити пароль`,confirmPasswordPlaceholder:`Підтвердити пароль`,newPasswordPlaceholder:`Введіть новий пароль`,confirmNewPasswordPlaceholder:`Підтвердити новий пароль`,leaveBlankToKeep:`залиште порожнім, щоб зберегти поточне значення`,groups:`Групи`,optional:`необов’язково`,autoGeneratedPassword:`Надійний пароль буде автоматично згенеровано та надіслано користувачеві електронною поштою.`,passwordManagedByAdvancedAuth:`Пароль керується розширеною автентифікацією. Використовуйте «Скинути пароль», щоб надіслати новий пароль користувачеві електронною поштою.`,resetPassword:`Скинути пароль`,resettingPassword:`Скидання пароля...`},deleteModal:{title:`Видалити користувача`,message:`Ви впевнені, що хочете видалити цього користувача? Цю дію не можна скасувати.`,confirm:`Видалити користувача`}},streamOverlay:{title:`Накладання потоку`,invalidPrinterId:`Недійсний ідентифікатор принтера`,cameraStream:`Потік камери`,progress:`Прогрес`,eta:`ETA`,printerIdle:`Принтер неактивний`,printerOffline:`Принтер не в мережі`,builder:{title:`Оформлення трансляції`,description:`Складає адресу оформлення трансляції: повноекранне зображення камери з накладеними даними друку — для OBS, настінного екрана або будь-якого джерела-браузера. Виберіть потрібні поля та скопіюйте адресу.`,printer:`Принтер`,size:`Розмір тексту`,sizeSmall:`Малий`,sizeMedium:`Середній`,sizeLarge:`Великий`,fps:`Частота кадрів`,fpsHint:`Камери A1 і P1 видають щонайбільше близько 5 кадрів за секунду, хоч би яке значення ви задали.`,token:`Токен оформлення трансляції (необов'язково)`,tokenHint:`Потрібен лише за увімкненого входу: OBS не має власного сеансу. Створіть його вище з областю «Оформлення трансляції».`,tokenWarning:`Ця адреса містить токен: будь-хто, хто її прочитає, побачить трансляцію та назву файлу. Відкличте токен, щоб закрити доступ.`,fields:`Поля для показу`,fieldPrinter:`Назва принтера`,fieldFilename:`Назва файлу`,fieldStatus:`Стан`,fieldProgress:`Смуга поступу`,fieldLayers:`Кількість шарів`,fieldEta:`Залишок часу та час завершення`,fieldCamera:`Зображення камери`,chamberHint:`Температура камери показується лише на моделях зі справжнім датчиком: P1 та A1 повідомляють беззмістовне значення, тому її пропущено.`,urlTitle:`Адреса оформлення`,open:`Відкрити`,showPreview:`Показати попередній перегляд`,hidePreview:`Сховати попередній перегляд`,previewTitle:`Попередній перегляд оформлення`},status:{printing:`Друк`,paused:`Призупинено`,finished:`Готово`,failed:`Не вдалося`,idle:`Неактивний`,unknown:`Невідомий`}},profiles:{title:`Профілі`,subtitle:`Керуйте профілями слайсера та калібруваннями Pressure Advance`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Локальні профілі`,kprofiles:`K-профілі`},orcaCloud:{connectedAs:`Підключено як`,connectedShort:`Підключено до Orca Cloud`,logout:`Відключити`,noLogoutPermission:`Ви не маєте дозволу на відключення`,noConnectPermission:`Ви не маєте дозволу на підключення до Orca Cloud`,retry:`Повторити`,connectButton:`Підключити Orca Cloud`,connect:{title:`Підключитися до Orca Cloud`,description:`Увійти у свій обліковий запис Orca Cloud, щоб синхронізувати свої профілі слайсера в Bambuddy.`},device:{title:`Підтвердити Bambuddy в Orca Cloud`,instruction:`Відкрийте Orca Cloud і підтвердьте цей код. Bambuddy підключається автоматично, коли ви підтверджуєте.`,codeLabel:`Ваш код сполучення`,openButton:`Відкрити сторінку підтвердження Orca Cloud`,manualHint:`Або перейдіть до {{url}} і введіть код вище.`,waiting:`Чекаємо на ваше схвалення…`,cancel:`Скасувати`},profiles:{title:`Ваші профілі Orca Cloud ({{count}})`,refresh:`Оновити`,empty:`У вашому обліковому записі Orca Cloud ще не знайдено профілів.`},toast:{disconnected:`Відключено від Orca Cloud`},errors:{startFailed:`Не вдалося розпочати підключення Orca Cloud.`,denied:`Сполучення було відхилено в Orca Cloud.`,expired:`Термін дії коду сполучення минув. Натисніть Підключитися, щоб повторити спробу.`,pollFailed:`Втрачено з’єднання під час очікування підтвердження. Спробуйте ще раз.`}},localProfiles:{title:`Локальні профілі`,subtitle:`Імпорт і керування профілями слайсера з OrcaSlicer`,import:`Імпортувати профілі`,importDesc:`Перетягніть сюди файли .bbscfg, .bbsflmt, .orca_filament, .zip або .json`,importing:`Імпортування…`,search:`Шукати локальні профілі…`,noPresets:`Локальних профілів ще немає`,noSearchResults:`Профілів за вашим запитом не знайдено`,badge:`Локальний`,edit:`Редагувати`,delete:`Видалити`,cancel:`Скасувати`,deleteConfirmTitle:`Видалити профіль`,deleteConfirm:`Видалити цей профіль? Цю дію неможливо скасувати.`,source:`Джерело`,inheritsFrom:`Успадковує`,filamentType:`Тип`,vendor:`Виробник`,compatiblePrinters:`Принтери`,nozzleTemp:`Температура сопла`,cost:`Вартість`,density:`Щільність`,pressureAdvance:`Випередження тиску`,filament:`Філамент`,process:`Процес`,printer:`Принтер`,toast:{importSuccess:`Імпортовано профілів: {{count}}`,importSkipped:`Пропущено профілів-дублікатів: {{count}}`,importError:`Помилок під час імпорту: {{count}}`,deleted:`Профіль видалено`,updated:`Профіль оновлено`}},connectedAs:`Підключено як`,signInExpiredTitle:`Термін входу в Bambu Cloud минув`,signInExpiredBody:`Bambu Lab більше не приймає збережений токен. Увійдіть ще раз, щоб відновити хмарні профілі, імпорт MakerWorld і перевірку прошивки.`,logout:`Вийти`,noLogoutPermission:`Ви не маєте дозволу на вихід`,failedToLoad:`Не вдалося завантажити профілі`,retry:`Повторити`,time:{justNow:`Щойно`,minsAgo:`{{count}}хв тому`,hoursAgo:`{{count}} год тому`,daysAgo:`{{count}} дн. тому`},toast:{loggedOut:`Вихід виконано`},login:{title:`Підключитися до Bambu Cloud`,subtitle:`Синхронізуйте профілі слайсера між пристроями`,email:`Електронна пошта`,password:`Пароль`,region:`Регіон`,regionGlobal:`Глобальний`,regionChina:`Китай`,verificationCode:`Код підтвердження`,totpCode:`Код автентифікатора`,checkEmail:`Перевірте свою електронну пошту ({{email}}), щоб отримати 6-значний код`,enterTotpHint:`Введіть 6-значний код із програми автентифікації`,accessToken:`Токен доступу`,accessTokenHint:`Вставте токен доступу Bambu Cloud. Облікові записи в китайському регіоні мають використовувати цей спосіб, оскільки вони прив’язані до телефона й вхід електронною поштою недоступний. У вікі описано, як отримати токен із файлів cookie MakerWorld.`,back:`Назад`,loginButton:`Увійти`,verifyButton:`Підтвердити`,setTokenButton:`Установити токен`,useToken:`Натомість використати токен доступу`,captchaTitle:`Bambu Cloud вимагає пройти CAPTCHA`,captchaBody:`Bambu вимагає від вашої мережі пройти CAPTCHA, перш ніж прийняти вхід, і відповісти на цю перевірку з Bambuddy неможливо. Річ не в пошті та не в паролі. Блокування прив'язане до вашої публічної IP-адреси і зазвичай зникає саме протягом кількох годин, а повторні спроби лише подовжують його. Щоб увійти зараз, скористайтеся токеном доступу із сеансу браузера.`,useEmail:`Увійти за допомогою електронної пошти`,toast:{loggedIn:`Успішно ввійшли`,codeSent:`Код підтвердження надіслано на вашу електронну адресу`,enterTotp:`Введіть код із програми автентифікації`,tokenSet:`Токен успішно встановлено`}},presets:{myPreset:`Мій профіль (можна редагувати)`,duplicate:`Дублювати`,editable:`Можна редагувати`,failedToLoadDetails:`Не вдалося завантажити відомості про профіль`,deleteConfirm:`Видалити цей профіль?`,deleteWarning:`Це назавжди видалить "{{name}}" із Bambu Cloud. Це неможливо скасувати.`,noDuplicatePermission:`Ви не маєте дозволу на дублювання стилів`,noEditPermission:`Ви не маєте дозволу редагувати стилі`,noDeletePermission:`Ви не маєте дозволу на видалення стилів`,types:{filament:`Попереднє налаштування філаменту`,printer:`Попереднє налаштування принтера`,process:`Попереднє налаштування процесу`},toast:{deleted:`Попереднє налаштування видалено`,created:`Попереднє налаштування створено`,updated:`Попереднє налаштування оновлено`,duplicated:`Профіль продубльовано`,fieldAdded:`Додано поле "{{key}}".`,exported:`Попереднє налаштування експортовано`},baseLabel:`База: {{name}}`,currentLabel:`Поточний профіль: {{name}}`,newPreset:`Нове налаштування`,editPreset:`Редагувати профіль`,duplicatePreset:`Дублювати профіль`,createNewPreset:`Створити новий профіль`,customizeSettings:`Налаштуйте параметри для нового стилю`,compareWithBase:`Порівняти з базовим профілем`,compare:`Порівняйте`,basePreset:`Базове передналаштування`,selectBasePreset:`Виберіть базове налаштування...`,presetName:`Назва профілю`,myCustomPreset:`Мій власний профіль`,inheritsFrom:`Успадковує від`,dropJsonToImport:`Відпустіть JSON, щоб імпортувати`,tabs:{common:`Основні`,allFields:`Всі поля`},availableFields:`Доступні поля`,searchFieldsPlaceholder:`Шукати поля...`,noMatchingFields:`Немає відповідних полів`,allFieldsAdded:`Всі поля додано`,addCustomField:`Додати спеціальне поле`,yourOverrides:`Ваші перевизначення`,noOverridesYet:`Перевизначення ще немає`,clickFieldsToAdd:`Натисніть поля ліворуч, щоб додати їх`,saveAsTemplate:`Зберегти як шаблон`,jsonTip:`Порада: перетягніть файл .json у будь-яке місце на цьому модалі, щоб імпортувати налаштування`},cloudView:{searchPlaceholder:`Шукати профілі...`,templates:`Шаблони`,refresh:`Оновити`,newPreset:`Нове налаштування`,clearFilters:`Очистити фільтри`,compareMode:`Режим порівняння`,selectAnotherPreset:`Вибрати інший попередній набір {{type}}.`,clickTwoPresets:`Клацніть два стилі одного типу, щоб порівняти`,selectFirst:`1. Виберіть перший`,selectSecond:`2. Виберіть другий`,compareNow:`Порівняти зараз`,lastSynced:`Остання синхронізація:`,showingCount:`Показано профілів: {{showing}} із {{total}}`,noPresetsFound:`Попередніх налаштувань не знайдено`,columns:{filament:`Філамент`,process:`процес`,printer:`Принтер`},noFilamentPresets:`Немає профілів філаменту`,noProcessPresets:`Немає профілів процесу`,noPrinterPresets:`Немає профілів принтера`,filters:{type:`Тип`,owner:`Власник`,printer:`Принтер`,nozzle:`Сопло`,filament:`Філамент`,layer:`Шар`,all:`Усі`,myPresets:`Мої профілі`,builtIn:`Вбудований`,process:`процес`},noTemplatesPermission:`Ви не маєте дозволу на керування шаблонами`,noRefreshPermission:`Ви не маєте дозволу оновлювати профілі`,noCreatePermission:`Ви не маєте дозволу створювати профілі`},templates:{title:`Швидкі шаблони`,noTemplates:`Шаблонів ще немає`,createFirst:`Створіть шаблони в редакторі профілів`,typeFilter:`тип:`,deleteTitle:`Видалити шаблон`,deleteWarning:`Цю дію не можна скасувати`,deleteConfirm:`Ви впевнені, що хочете видалити "{{name}}"?`,namePlaceholder:`Назва шаблону`,descriptionPlaceholder:`опис`,settingsJson:`Налаштування (JSON)`,fieldsCount:`Полів: {{count}}`,shownInModals:`Показано в модальних формах`,hiddenInModals:`Приховано в модальних формах`,apply:`Застосувати`,toast:{deleted:`Шаблон видалено`,updated:`Шаблон оновлено`,created:`Шаблон створено`,applied:`Шаблон застосовано`}}},support:{debugLoggingActive:`Журнал налагодження активний`,manageLogs:`Керувати`,collectItem7:`Підключення принтерів і версії прошивок`,collectItem8:`Статус інтеграції (Spoolman, MQTT, HA)`,collectItem9:`Мережеві інтерфейси (лише підмережі)`,collectItem10:`Версії пакетів Python`,collectItem11:`Перевірки справності бази даних`,collectItem12:`Відомості про середовище Docker`,bundleGenerating:`Створення пакета...`,bundleStepConnection:`Запуск перевірки підключення принтера`,bundleStepVirtualPrinters:`Виконання перевірок налаштування віртуального принтера`,bundleStepLogScan:`Сканування останніх журналів на наявність відомих проблем`,bundleStepBuild:`Створення ZIP-пакета підтримки`},fileManager:{variants:{badge:`Версій: {{count}}`,groupAction:`Згрупувати як версії`,groupTooltip:`Позначити ці файли як одне завдання, нарізане для різних принтерів`,grouped:`Файлів згруповано як версії: {{count}}`,printAlternatives:`Друк (варіантів: {{count}})`},title:`Менеджер файлів`,subtitle:`Упорядковуйте файли друку та керуйте ними`,uploadFiles:`Вивантажити файли`,newFolder:`Нова папка`,folderName:`Назва папки`,folderNamePlaceholder:`наприклад, функціональні частини`,renameFile:`Перейменувати файл`,renameFolder:`Перейменувати папку`,invalidFilenameChar:`Символ «{{char}}» не можна використовувати в назвах файлів для друку. SD-картка принтера не приймає такі символи: < > : " / \\ | ? *`,moveFiles:`Перемістити файли: {{count}}`,rootNoFolder:`Корінь (без папки)`,current:`поточний`,linkFolder:`Пов’язати папку`,linkFolderDescription:`Пов’язати «{{name}}» із проєктом або архівом для швидкого доступу.`,project:`Проєкт`,archive:`Архів`,noProjectsFound:`Проєкти не знайдено`,noArchivesFound:`Архіви не знайдено`,unlink:`Від’єднати`,link:`Пов’язати`,dragDropFiles:`Перетягніть файли сюди`,dropFilesHere:`Перетягніть файли сюди`,releaseToUpload:`Відпустіть, щоб вивантажити`,orClickToBrowse:`або натисніть, щоб переглянути`,allFileTypesSupported:`Підтримуються всі типи файлів. Файли ZIP будуть розпаковані.`,zipFilesDetected:`Виявлено файли ZIP.`,zipExtractOptions:`Файли ZIP будуть розпаковані. Виберіть спосіб обробки структури папок:`,preserveZipStructure:`Зберегти структуру папок із ZIP`,createFolderFromZip:`Створити папку з назви ZIP-файлу`,stlThumbnailGeneration:`Створення мініатюр STL`,zipMayContainStl:`Файли ZIP можуть містити файли STL. Мініатюри можна генерувати під час вилучення.`,thumbnailsCanBeGenerated:`Ескізи можна створити для файлів STL. Обробка великих моделей може зайняти більше часу.`,generateThumbnailsForStl:`Створювати мініатюри для файлів STL`,threemfDetected:`Виявлено файли 3MF.`,threemfExtractionInfo:`Модель принтера, матеріал, колір і параметри друку будуть автоматично витягнуті з файлів 3MF.`,willBeExtracted:`Буде розпаковано`,filesExtracted:`Розпаковано файлів: {{count}}`,uploadComplete:`Вивантаження завершено. Успішно: {{succeeded}}`,uploadFailed:`Не вдалося вивантажити`,zipFilesFailed:`Не вдалося обробити файлів: {{count}}`,uploading:`Вивантаження...`,changeLink:`Змінити посилання...`,linkTo:`Посилання на...`,linkToProjectOrArchive:`Посилання на проєкт або архів`,generateThumbnail:`Створити мініатюру`,generateThumbnails:`Створити мініатюри`,generateThumbnailsForMissing:`Створити відсутні мініатюри файлів STL`,gridView:`Вигляд сітки`,listView:`Перегляд списку`,lowDiskSpaceWarning:`Попередження про брак місця на диску`,lowDiskSpaceDetails:`Вільно лише {{free}} із {{total}}. У налаштуваннях задано поріг {{threshold}} ГБ.`,files:`Файли`,folders:`Папки`,size:`Розмір`,free:`Вільно`,allFiles:`Усі файли`,allExternal:`Зовнішні`,externalIsEmpty:`Немає зовнішніх файлів`,externalEmptyDescription:`Тут відображатимуться файли у ваших пов’язаних зовнішніх папках.`,wrap:`Перенесення`,enableTextWrapping:`Увімкнути перенесення тексту`,disableTextWrapping:`Вимкнути перенесення тексту`,collapse:`Згорнути`,collapseFoldersByDefault:`За замовчуванням згорнути папки`,expandFoldersByDefault:`Розгорнути папки за замовчуванням`,folderSort:`Сортування папок`,folderSortByName:`За назвою`,folderSortByActivity:`За останніми діями`,dragToResizeTooltip:`Перетягніть, щоб змінити розмір, двічі клацніть, щоб скинути`,searchFiles:`Пошук файлів...`,searchSubfoldersHint:`Включаючи вкладені папки`,readme:{truncated:`Усічений`,show:`Показати README`,hide:`Приховати README`,label:`README`},tags:{title:`Теги`,subtitle:`Файли міток для наскрізної фільтрації — іграшки, безпечні для дітей, лише PETG, будь-що.`,manage:`Теги`,manageTitle:`Керувати каталогом тегів`,add:`Новий тег`,edit:`Перейменувати тег`,name:`Назва`,fileCount:`Файли`,empty:`Тегів ще немає. Створіть його, щоб розпочати маркування файлів.`,noMatches:`Немає відповідних тегів.`,createPlaceholder:`напр. іграшки, безпечні для дітей, petg`,createButton:`Створити`,nameRequired:`Потрібно вказати назву.`,searchPlaceholder:`Фільтр тегів...`,created:`Тег створено.`,updated:`Тег перейменовано.`,deleted:`Тег видалено.`,saveFailed:`Не вдалося зберегти тег.`,deleteFailed:`Не вдалося видалити тег.`,applyFailed:`Не вдалося застосувати теги.`,applyAdd:`Додати теги`,applyRemove:`Видалити теги`,applyAddSuccess:`Додано теги {{count}} до файлів {{files}}.`,applyRemoveSuccess:`Видалено теги {{count}} у файлах {{files}}.`,actionAdd:`Додати до вибраних файлів`,actionRemove:`Видалити з вибраних файлів`,tagAction:`Тег`,bulkTitle:`Позначити вибрані файли ({{count}})`,bulkTooltip:`Додати або видалити теги для кожного вибраного файлу.`,noPermission:`Ви не маєте дозволу позначати файли тегами.`,filterLabel:`Фільтрування за:`,clearAll:`Очистити все`,confirmDelete:`Видалити тег "{{name}}"?`,confirmDeleteMessage:`Це видалить тег з каталогу. Файли зберігають інші теги.`,confirmDeleteInUseMessage:`Цей тег призначено файлам ({{count}}). Його буде видалено з усіх файлів, але самі файли залишаться без змін.`,editAria:`Редагувати {{name}}`,deleteAria:`Видалити {{name}}`},allTypes:`Усі типи`,prints:`Друки`,ascending:`За зростанням`,descending:`За спаданням`,showModified:`Показати змінені дати`,hideModified:`Приховати змінені дати`,lastModified:`Востаннє змінено`,lastActivity:`Остання активність`,resultsCount:`{{showing}} з {{total}} файлів`,selectAll:`Вибрати усі`,deselectAll:`Зняти вибір із усіх`,selected:`Вибрано: {{count}}`,adding:`Додавання...`,loadingFiles:`Завантаження файлів...`,folderIsEmpty:`Папка порожня`,noFilesYet:`Файлів ще немає`,folderEmptyDescription:`Щоб почати, вивантажте файли або перемістіть їх до цієї папки.`,noFilesDescription:`Вивантажте файли, щоб упорядковувати матеріали для друку.`,noMatchingFiles:`Немає відповідних файлів`,noMatchingFilesDescription:`Жоден файл не відповідає вашим поточним критеріям пошуку чи фільтру.`,clearFilters:`Очистити фільтри`,printedCount:`Надруковано {{count}}x`,uploadedBy:`Вивантажено`,deleteFolder:`Видалити папку`,deleteFile:`Видалити файл`,deleteFilesCount:`Видалити файли {{count}}.`,deleteFolderConfirm:`Ви впевнені, що хочете видалити цю папку? Усі файли всередині також буде видалено.`,deleteFileConfirm:`Ви впевнені, що хочете видалити цей файл?`,deleteFilesConfirm:`Ви впевнені, що бажаєте видалити вибрані файли {{count}}? Цю дію не можна скасувати.`,deleting:`Видалення...`,noPermissionRenameFolder:`Ви не маєте дозволу на перейменування папок`,noPermissionLinkFolder:`Ви не маєте дозволу на пов’язування папок`,noPermissionDeleteFolder:`Ви не маєте дозволу на видалення папок`,onlyEmptyFoldersDeletable:`Можна видаляти лише порожні папки`,noPermissionPrint:`Ви не маєте дозволу на друк`,noPermissionAddToQueue:`Ви не маєте дозволу на додавання в чергу`,noPermissionSlice:`Ви не маєте дозволу нарізати файли`,noPermissionDownload:`У вас немає дозволу на завантаження файлів`,noPermissionPreview:`У вас немає дозволу на попередній перегляд файлів`,preview3d:`3D-перегляд`,noPermissionRenameFile:`Ви не маєте дозволу на перейменування цього файлу`,noPermissionGenerateThumbnail:`Ви не маєте дозволу створювати мініатюри`,noPermissionDeleteFile:`Ви не маєте дозволу на видалення цього файлу`,noPermissionCreateFolder:`Ви не маєте дозволу на створення папок`,noPermissionUpload:`Ви не маєте дозволу на вивантаження файлів`,noPermissionMoveFiles:`Ви не маєте дозволу на переміщення файлів`,noPermissionDeleteFiles:`Ви не маєте дозволу на видалення файлів`,linkExternal:`Зовнішнє посилання`,linkExternalFolder:`Посилання на зовнішню папку`,linkExternalFolderDescription:`Змонтуйте каталог хоста (NAS, USB, спільний мережевий ресурс) у файловому менеджері. Файли не копіюються — доступ до них здійснюється безпосередньо з початкового шляху.`,externalFolderNamePlaceholder:`наприклад, NAS Друкує`,externalPath:`Шлях хоста`,externalPathHelp:`Абсолютний шлях до каталогу на хості Docker. Має бути прив’язано до контейнера.`,readOnly:`Тільки для читання`,readOnlyHelp:`забороняє вивантаження й видалення`,showHiddenFiles:`Показати приховані файли (dotfiles)`,externalFolder:`Зовнішня папка`,scanFolder:`Сканувати`,toast:{folderCreated:`Папка створена`,openInSlicerFailed:`Не вдалося відкрити у слайсері`,folderDeleted:`Папку видалено`,fileDeleted:`Файл видалено`,filesDeleted:`Видалені файли {{count}}.`,filesMoved:`Файли переміщено`,folderLinked:`Папку пов’язано`,folderUnlinked:`Папку від’єднано`,externalFolderLinked:`Зовнішня папка пов’язана та просканована`,folderScanned:`Сканування завершено: {{added}} додано, {{removed}} видалено`,addedToQueue:`Додано до черги файлів: {{count}}`,addedToQueuePartial:`Додано: {{added}}; не вдалося додати: {{failed}}`,failedToAddToQueue:`Не вдалося додати файли: {{error}}`,fileRenamed:`Файл перейменовано`,folderRenamed:`Папку перейменовано`,thumbnailsGenerated:`Створено мініатюри {{count}}`,thumbnailsGeneratedPartial:`Створено мініатюри {{succeeded}}, {{failed}} не вдалося`,noStlMissingThumbnails:`Немає файлів STL без мініатюр`,failedToGenerateThumbnails:`Не вдалося створити мініатюри: {{error}}`,thumbnailGenerated:`Створено мініатюру`,failedToGenerateThumbnail:`Не вдалося створити мініатюру: {{error}}`}},projects:{parentLabel:`Батьківський проєкт`,parentNone:`Немає (проєкт верхнього рівня)`,parentHint:`Вкладіть цей проєкт в інший, щоб його показники підсумовувалися в головному проєкті`,partOf:`Частина проєкту {{name}}`,subProjectCount:`Підпроєктів: {{count}}`,subProjectsOf:`Підпроєкти проєкту {{name}}`,collapseSubProjects:`Згорнути підпроєкти`,expandSubProjects:`Розгорнути підпроєкти`,title:`Проєкти`,subtitle:`Організовуйте та відстежуйте свої проєкти 3D-друку`,newProject:`Новий проєкт`,editProject:`Редагувати проєкт`,deleteProject:`Видалити проєкт`,projectName:`Назва проєкту`,description:`опис`,noProjects:`Проєктів ще немає`,noProjectsFiltered:`Немає проєктів {{status}}.`,noProjectsFilteredHelp:`У вас немає {{status}} проєктів. Проєкти з’являться тут, коли їхній статус зміниться.`,createFirst:`Створіть свій перший проєкт, щоб почати впорядковувати пов’язані роздруківки, відстежувати прогрес і керувати збірками.`,createFirstButton:`Створіть свій перший проєкт`,create:`Створити`,files:`Файли`,prints:`Принти`,plates:`пластини`,parts:`частин`,lastModified:`Остання зміна`,deleteConfirm:`Ви впевнені, що хочете видалити цей проєкт? Архіви та елементи черги буде від’єднано, але не видалено.`,addFiles:`Додати файли`,removeFile:`Видалити файл`,viewDetails:`Переглянути деталі`,namePlaceholder:`наприклад, Voron 2.4 Build`,descriptionPlaceholder:`Додатковий опис...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URL має починатися з http:// або https://`,openExternalUrl:`Відкритий проєкт URL`,coverImageLabel:`Фото обкладинки`,coverImageAlt:`Обкладинка проєкту`,coverImageUpload:`Вивантажити`,coverImageReplace:`Замінити`,coverImageRemove:`видалити`,color:`Колір`,targetPlates:`Цільові пластини`,targetPlatesPlaceholder:`наприклад, 25`,targetPlatesHelp:`Кількість завдань друку`,targetParts:`Цільові частини`,targetPartsPlaceholder:`наприклад, 150`,targetPartsHelp:`Загальна кількість необхідних об’єктів`,targetSets:`Копій кожного файлу`,targetSetsPlaceholder:`наприклад, 10`,targetSetsHelp:`Кількість друків кожного придатного до друку файлу`,tagsLabel:`Теги (розділені комами)`,tagsPlaceholder:`напр., ворон, функціональний, подарунок`,dueDate:`Термін виконання`,priority:`Пріоритет`,priorityLow:`Низький`,priorityNormal:`нормальний`,priorityHigh:`Високий`,priorityUrgent:`Терміново`,statusActive:`Активний`,statusCompleted:`Виконано`,statusArchived:`Архівовано`,done:`Готово`,completed:`завершено`,failed:`не вдалося`,inQueue:`в черзі`,noPrintsYet:`Ще немає відбитків`,printJobs:`Завдання друку (пластини)`,partsPrinted:`Надруковані частини`,failedParts:`Вийшли з ладу деталі`,import:`Імпорт`,export:`Експорт`,importProject:`Імпорт проєкту`,exportAll:`Експортуйте всі проєкти`,loading:`Завантаження проєктів...`,noEditPermission:`Ви не маєте дозволу на редагування проєктів`,noDeletePermission:`Ви не маєте дозволу на видалення проєктів`,noCreatePermission:`Ви не маєте дозволу на створення проєктів`,noImportPermission:`Ви не маєте дозволу на імпорт проєктів`,noExportPermission:`Ви не маєте дозволу на експорт проєктів`,toast:{created:`Проєкт створено`,updated:`Проєкт оновлений`,deleted:`Проєкт видалено`,imported:`Проєкт імпортовано`,multipleImported:`{{count}} проєкти імпортовані`,importFailed:`Помилка імпорту`,exported:`Експортовані проєкти (лише метадані)`}},projectDetail:{notFound:`Проєкт не знайдено`,backToProjects:`Назад до проєктів`,export:`Експорт`,exportProject:`Експортний проєкт`,noExportPermission:`Ви не маєте дозволу на експорт проєктів`,noEditPermission:`Ви не маєте дозволу на редагування проєктів`,partOf:`частина:`,priorityLabel:`Пріоритет:`,noPrints:`У цьому проєкті ще немає роздруківок`,status:{active:`Активний`,completed:`Виконано`,archived:`Архівовано`},priority:{low:`Низький`,normal:`нормальний`,high:`Високий`,urgent:`Терміново`},dueDate:{overdue:`Прострочена`,today:`Термін виконання сьогодні`,daysLeft:`Залишилося {{count}} днів`},progress:{platesProgress:`Пластини Прогрес`,partsProgress:`Прогрес запчастин`,setsProgress:`Завершені комплекти`,sets:`комплектів`,setsHint:`Комплект вважається завершеним, коли кожен придатний до друку файл надруковано стільки разів`,printJobs:`завдання друку`,parts:`частин`,percentComplete:`{{percent}}% виконано`,remaining:`Залишилося {{count}}.`},stats:{printJobs:`Завдання друку`,total:`всього`,failed:`{{count}} не вдалося`,partsPrinted:`Надруковані частини {{count}}.`,printTime:`Час друку`,filamentUsed:`Філамент, що використовується`},cost:{title:`Відстеження витрат`,filamentCost:`Вартість філаменту`,energy:`Енергія`,totalCost:`Загальна вартість`,total:`Всього`,includesBom:`в т.ч. BOM`,budget:`Бюджет`,remaining:`Залишилося`},subProjects:{title:`Підпроєкти ({{count}})`,jobs:`Завдань: {{count}}`},rollup:{title:`Разом із підпроєктами: {{count}}`,progress:`Загальний прогрес`,percentComplete:`Завершено {{percent}}%`},notes:{title:`Примітки`,noEditPermission:`Ви не маєте дозволу редагувати нотатки`,placeholder:`Додайте примітки щодо цього проєкту...`,empty:`Приміток ще немає. Натисніть Редагувати, щоб додати примітки.`},files:{title:`Файли`,linkFolders:`Зв’язувати папки з файлового менеджера`,forQuickAccess:`до цього проєкту для швидкого доступу.`,fileCount:`Файлів: {{count}}`,empty:`Немає пов’язаних папок. Перейдіть до файлового менеджера та зв’яжіть папку з цим проєктом.`,printedCount:`Надруковано разів: {{count}}`,progressTooltip:`Завершено друків: {{done}} із {{target}}`,noFiles:`У цій папці немає файлів.`},bom:{title:`Перелік матеріалів`,acquired:`{{completed}}/{{total}} придбано`,showAll:`Показати все`,hideDone:`Сховати готове`,addPart:`Додати частину`,noAddPermission:`Ви не маєте дозволу додавати частини`,partNamePlaceholder:`Назва деталі (наприклад, гвинти M3x8)`,partName:`Назва частини`,qty:`кількість`,price:`Ціна ({{currency}})`,sourcingUrlPlaceholder:`URL джерела (необов’язково)`,remarksPlaceholder:`Примітки (необов’язково)`,deletePart:`Видалити частину`,deleteConfirm:`Ви впевнені, що хочете видалити "{{name}}"?`,noUpdatePermission:`Ви не маєте дозволу на оновлення частин`,noEditPermission:`Ви не маєте дозволу редагувати частини`,noDeletePermission:`Ви не маєте дозволу на видалення частин`,totalCost:`Загальна вартість:`,empty:`Немає частин у описі матеріалів. Додайте обладнання, електроніку чи інші компоненти, щоб відстежувати, що потрібно отримати.`},timeline:{title:`Хронологія діяльності`,empty:`Активності ще немає.`},template:{saveAsTemplate:`Зберегти як шаблон`,noCreatePermission:`Ви не маєте дозволу на створення шаблонів`},queue:{title:`Черга`,viewAll:`Переглянути всі`,printing:`Друкується: {{count}}`,queued:`{{count}} у черзі`},prints:{title:`Друки ({{count}})`},toast:{projectUpdated:`Проєкт оновлений`,partAdded:`Частина додана`,partRemoved:`Частину видалено`,exportFailed:`Помилка експорту`,projectExported:`Проєкт експортовано`,templateCreated:`Шаблон створено`}},system:{title:`Інформація про систему`,version:`Версія`,uptime:`Час роботи`,cpuUsage:`CPU Використання`,memoryUsage:`Використання пам’яті`,diskUsage:`Використання диска`,networkInfo:`Інформація про мережу`,logs:`Журнали`,debugMode:`Режим налагодження`,enableDebug:`Увімкнути журнал налагодження`,disableDebug:`Вимкнути ведення журналу налагодження`,downloadLogs:`Завантажити журнали`,clearLogs:`Очистити журнали`,dockerInfo:`Docker Інформація`,containerName:`Назва контейнера`,imageName:`Назва зображення`,platform:`Платформа`,architecture:`Архітектура`},sponsors:{sectionTitle:`Незалежний і фінансований громадою`,tagline:`Bambuddy є безкоштовним і залишається таким, тому що люди вирішили його підтримати. Ні VC, ні блокування в хмарі.`,viewSupporters:`Переглянути прихильників`,toastPrints:`Завершено друків із Bambuddy: {{count}}. Bambuddy залишається безкоштовним завдяки своїм прихильникам.`,toastCost:`За допомогою Bambuddy обліковано філаменту на {{total}}. Дізнайтеся, хто допомагає проєкту залишатися незалежним.`,toastArchives:`Заархівовано друків із Bambuddy: {{count}}. Дізнайтеся, хто допомагає проєкту залишатися незалежним.`,toastAnniversary:`Рік з Bambuddy! Подивіться, хто зберігає незалежність проєкту.`,toastVersionUpdate:`Оновлено до v{{version}}. Bambuddy залишається безкоштовним завдяки своїм прихильникам.`,toastBusiness:`Використовуєте Bambuddy на принтерах ({{count}})? Для команд доступний план підтримки: пріоритетні виправлення, виставлення рахунків і прямий зв’язок із супровідником.`,businessCta:`Bambuddy для бізнесу`,businessTitle:`Bambuddy для бізнесу`,businessTagline:`Ви використовуєте принтери {{count}}. Пріоритетна підтримка, комерційне ліцензування та виставлення рахунків доступні для команд і друкарень.`},library:{title:`Бібліотека філаментів`,addFilament:`Додати філамент`,editFilament:`Редагувати філамент`,deleteFilament:`Видалити філамент`,vendor:`Продавець`,material:`матеріал`,color:`Колір`,kFactor:`Фактор K`,temperature:`температура`,noFilaments:`У бібліотеці немає філаментів`,deleteConfirm:`Ви впевнені, що хочете видалити цю філамент?`,importFromPrinter:`Імпорт із принтера`,exportToFile:`Експорт у файл`,runWithPipeline:{actionLabel:`Запустити з конвеєром`,noPermission:`Ви не маєте дозволу на запуск конвеєрів`,modalTitle:`Запустити з конвеєром`,confirmTitle:`Підтвердити запуск`,confirmIntro:`Під час попередньої перевірки виявлено проблеми з цим запуском`,sourceHint:`Джерело`,pipelineHint:`Конвеєр`,targetHint:`Ціль`,pipelineListAria:`Наявні конвеєри`,runAnyway:`Усе одно запустити`,loading:`Завантаження…`,empty:`Збережених конвеєрів ще немає. Відкрийте вікно нарізання й натисніть «Зберегти як конвеєр», щоб створити його.`,noTarget:`Цільовий принтер не встановлено`,noTargetMessage:`Для цього конвеєра не задано цільовий принтер. Відкрийте конвеєр у налаштуваннях і виберіть принтер.`,copies:`Копії`,copiesHint:`максимум {{n}}`,classTarget:`Будь-який {{model}}`,toast:{started:`Пуск конвеєра розпочато`,failed:`Не вдалося розпочати запуск`},issue:{printerNotSet:`У цьому конвеєрі не встановлено цільовий принтер.`,printerNotFound:`Цільовий принтер більше не існує.`,printerDisabled:`Цільовий принтер вимкнено.`,printerOffline:`Цільовий принтер не в мережі.`,filamentType:`Слот філаменту {{slot}}: очікується {{expected}}, в AMS — {{actual}}`,filamentColor:`Слот філаменту {{slot}}: колір не збігається (очікується {{expected}}, в AMS — {{actual}})`,amsSlotMissing:`Слот AMS {{slot}} недоступний на цьому принтері`,filamentUnverified:`Філамент для слота {{slot}} походить із хмарного або стандартного профілю, тому його неможливо перевірити заздалегідь.`,noClassMatches:`Жоден принтер у цій інсталяції не належить до цільового класу моделей конвеєра ({{expected}}).`,classNotSet:`Ціллю конвеєра вибрано клас принтерів, але модель не задано.`}}},slicerSettings:{presetValuesOutdatedSidecar:`Показано типові значення слайсера: ваш sidecar старіший за цю функцію і не може повідомити значення профілю. Оновіть образ sidecar, щоб їх побачити. Усе, чого ви не змінюєте, і далі береться з профілю.`,presetValuesNotConfigured:`Показано типові значення слайсера: sidecar не налаштовано, тому значення профілю прочитати не можна. Усе, чого ви не змінюєте, і далі береться з профілю.`,presetValuesSidecarUnavailable:`Показано типові значення слайсера: sidecar не відповів, тому значення профілю прочитати не можна. Усе, чого ви не змінюєте, і далі береться з профілю.`,presetValuesUnavailable:`Показано типові значення слайсера: значення вибраного профілю не вдалося прочитати. Усе, чого ви не змінюєте, і далі береться з профілю.`,filamentDefault:`За замовчуванням`,fromFile:`з файлу`,fromFileHint:`Автор моделі змінив цей параметр у вихідному файлі. Значення: {{value}}.`,fromFilePrinterCoupled:`принтер автора`,fromFilePrinterCoupledHint:`Підібрано під принтер, для якого створено файл, — на вашому значення може бути хибним або поза діапазоном.`,fromFileOverridesPreset:`перевизначає пресет`,fromFileOverridesPresetHint:`У файлі задано {{value}}, а вибраний пресет використовує {{preset}}. Позначайте, лише якщо перевагу має файл.`,useFromFile:`Використовувати значення з вихідного файлу для «{{option}}»`,otherFromFile:`Інші параметри з цього файлу`,fromFileSummary:`Дизайнер змінив у цьому файлі {{count}} параметрів процесу. Застосовуються лише позначені.`,fromFileUseAll:`Використати налаштування дизайнера`,fromFileUseAllHint:`Позначає параметри, які переносяться на інші принтери. Підлаштовані під принтер дизайнера та ті, що визначають обраний пресет, лишаються вимкненими.`,fromFileClear:`Зняти {{count}}`,loading:`Завантаження налаштувань слайсера…`,mode:{simple:`Простий`,advanced:`Розширений`,expert:`Експерт`},searchPlaceholder:`Пошук параметрів`,resetAll:`Скинути: {{count}}`,resetOption:`Скинути до типового значення`,noMatches:`Немає параметрів, що відповідають запиту.`},slice:{filamentSlotUnset:`не задано`,processSettingsEmbedded:`Не використовується, доки увімкнено «Використовувати вбудовані параметри файлу» — нарізанням керують параметри самого файлу.`,processSettingsInactive:`Неактивно`,presetsHidden:`приховано: {{count}}`,showAllPresets:`Показати всі`,showFewerPresets:`Показати менше`,processSettings:`Параметри процесу`,processSettingsHint:`Налаштуйте вибраний профіль для цього нарізання. Усе, чого ви не змінили, лишається як визначено профілем.`,processSettingsChanged:`змінено: {{count}}`,processSettingsUnchanged:`Значення профілю`,title:`Нарізання моделі`,action:`Нарізати`,actionAll:`Нарізати всі пластини ({{count}})`,actionAllTitle:`Нарізати всі пластини в один багатопластинний результат (один архів). Вибір філаменту охоплює всі слоти, визначені проєктом.`,allPlatesToggle:`Нарізати всі пластини ({{count}})`,slicing:`Нарізання…`,printer:`Профіль принтера`,process:`Профіль процесу`,filament:`Профіль філаменту`,filamentSlot:`Філамент {{index}} ({{type}})`,filamentColour:`Колір філаменту`,selectPreset:`— Виберіть профіль —`,loadingPresets:`Завантаження профілів…`,analyzingPlateFilaments:`Аналіз філаментів пластини…`,analyzingPlateFilamentsHint:`Виконується попереднє нарізання, щоб визначити, які слоти AMS використовує ця пластина. Результат кешується, тому повторне відкриття відбувається миттєво.`,previewToast:`Аналіз {{name}} — {{elapsed}}`,previewWithProgress:`Аналіз {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— не використовується на цій пластині`,noPresetsForSlot:`Немає профілів`,otherPrinters:`Інші принтери`,presetsLoadFailed:`Не вдалося завантажити профілі. Спочатку імпортуйте їх у розділі Налаштування → Профілі.`,refreshPresets:`Оновити`,refreshPresetsTitle:`Оновити профілі — отримати найновіші хмарні та вбудовані списки (скористайтеся після видалення профілю в Bambu Studio або Bambu Handy)`,allPresetsRequired:`Потрібно вибрати всі профілі`,useEmbedded:`Використати вбудовані налаштування файлу`,useEmbeddedHint:`Нарізати модель із налаштуваннями автора файлу — стінками, заповненням і філаментом — замість профілів вище. Ця можливість доступна, оскільки модель принтера відповідає файлу.`,autoOrient:`Автоматично орієнтувати об'єкти`,autoOrientHint:`Слайсер поверне кожен об'єкт на бік, який друкується найкраще. Орієнтацію з файлу буде замінено.`,autoArrange:`Автоматично розмістити на столі`,autoArrangeHint:`Слайсер розставить об'єкти так, щоб вони не перекривалися. Розташування з файлу буде замінено.`,enqueuing:`Надсилання завдання нарізання…`,queued:`У черзі…`,failed:`Не вдалося виконати нарізання. Перевірте журнали слайсера.`,startedToast:`Нарізання {{name}} у фоновому режимі…`,queuedToast:`У черзі: {{name}} — {{elapsed}}`,runningToast:`Нарізання {{name}} — {{elapsed}}`,runningWithProgress:`{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,runningWithProgressMultiPlate:`Пластина {{plateIndex}} з {{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,completedToast:`Нарізання {{name}} завершено`,externalWriteFallbackToast:`Збережено у внутрішній бібліотеці: не вдалося записати в зовнішню теку`,failedTitle:`Помилка нарізання`,failedToast:`Помилка нарізання {{name}}: {{detail}}`,tier:{local:`Імпортовані`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Стандартний`},cloud:{notAuthenticated:`Увійдіть у Bambu Cloud (Налаштування → Профілі → Bambu Cloud), щоб переглянути хмарні профілі.`,expired:`Сеанс Bambu Cloud завершився — увійдіть знову, щоб оновити хмарні профілі.`,unreachable:`Bambu Cloud зараз недоступний. Локальні та стандартні профілі й надалі працюють.`},orcaCloud:{notAuthenticated:`Увійдіть до Orca Cloud (Профілі → Orca Cloud), щоб переглянути профілі Orca.`,expired:`Сеанс Orca Cloud завершився — увійдіть ще раз, щоб оновити профілі Orca.`,unreachable:`Orca Cloud зараз недоступний. Інші профілі й надалі працюють.`},bedType:{label:`Друкарська пластина`,auto:`Авто (використовувати профіль процесу)`,coolPlate:`Холодна друкарська пластина`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Інженерна пластина`,highTemp:`Високотемпературна пластина`,texturedPEI:`Текстурована PEI-пластина`,smoothPEI:`Гладка PEI-пластина`},pipelines:{label:`Конвеєр`,applyAria:`Застосувати конвеєр`,applyPrompt:`Застосувати конвеєр…`,empty:`Немає збережених конвеєрів`,saveButton:`Зберегти як конвеєр`,saveTitle:`Зберегти поточний вибір чотирьох слотів як конвеєр для повторного використання`,namePlaceholder:`Назва конвеєра`,nameAria:`Нова назва конвеєра`,toast:{applied:`Застосовано "{{name}}"`,saved:`Конвеєр збережено`,saveFailed:`Не вдалося зберегти`}}},spoolman:{title:`Spoolman Інтеграція`,enabled:`Spoolman Увімкнено`,url:`Spoolman URL`,connected:`Підключено`,disconnected:`Не підключено`,testConnection:`Тестове підключення`,sync:`Синхронізувати`,syncing:`Синхронізація...`,lastSync:`Остання синхронізація`,linkToSpoolman:`Посилання на Spoolman`,openInSpoolman:`Відкрити в Spoolman`,unlinkSpool:`Від’єднати котушка`,unlinkConfirmTitle:`Скасувати призначення котушки?`,unlinkConfirmMessage:`Це призведе до видалення котушки з цього слота. Самі дані котушки залишаться незмінними.`,selectSpool:`Вибрати Spool`,noUnlinkedSpools:`Немає непризначених котушок`,linkSuccess:`Котушку успішно призначено`,linkFailed:`Не вдалося призначити котушку`,unlinkSuccess:`Призначення котушки успішно скасовано`,unlinkFailed:`Не вдалося скасувати призначення котушки`,linkedSpool:`Призначена котушка`,spoolId:`Ідентифікатор котушки`,fillSourceLabel:`(Spoolman)`,weight:`вага`,remaining:`Залишилося`,disableWeightSync:`Вимкнути синхронізацію приблизної ваги AMS.`,disableWeightSyncDesc:`Не оновлюйте залишкову ємність із оцінок AMS. Використовуйте це, якщо ви віддаєте перевагу відстеженню використання Spoolman, а не оцінкам на основі відсотка AMS. Нові котушки все ще використовуватимуть оцінку AMS як початкову вагу.`,reportPartialUsage:`Повідомити про часткове використання для невдалого друку`,reportPartialUsageDesc:`Якщо друк не вдається або скасовується, повідомте приблизну кількість філаменту, використаної до цього моменту, на основі виконання шару.`},locations:{title:`Місця зберігання`,subtitle:`Керуйте полицями, шухлядами та іншими фізичними місцями для зберігання своїх котушок`,add:`Додати місцезнаходження`,addShort:`додати`,edit:`Редагувати місцезнаходження`,name:`Назва`,spools:`Котушки`,sensors:`Датчики`,empty:`Місць зберігання ще немає. Створіть свою першу полицю або ящик.`,manage:`Розташування`,createPlaceholder:`напр. Полиця А, ящик 1`,nameRequired:`Потрібно вказати назву місця`,created:`Розташування створено`,updated:`Розташування оновлено`,deleted:`Розташування видалено`,saveFailed:`Не вдалося зберегти місцезнаходження`,deleteFailed:`Не вдалося видалити місцезнаходження`,deleteBlocked:`Видаліть усі котушки з цього місця перед видаленням`,confirmDelete:`Видалити "{{name}}"?`,confirmDeleteMessage:`Це місце буде видалено з каталогу. Котушки спочатку потрібно перемістити.`,confirmDeleteMessageWithSensors:`Це місце буде видалено з каталогу. Котушки спочатку потрібно перемістити. Підключені датчики також буде видалено.`},inventory:{title:`Облік котушок`,subtitle:`Керуйте своїми котушками`,addToInventory:`Додати до обліку`,addToInventoryPending:`Додавання...`,addToInventorySuccess:`Котушку додано до обліку`,addToInventoryFailed:`Не вдалося додати котушку до обліку`,unknownSpoolTitle:`Виявлено нову котушку філаменту`,unknownSpoolMessage:`У {{location}} виявлено котушку з невідомою RFID-міткою. Додати її до обліку?`,unknownSpoolSlot:`Слот`,bulk:{selectAllVisible:`Вибрати усі видимі`,selectRow:`Вибрати рядок`,selectGroup:`Вибрати групу`,selectionCount:`Вибрано {{count}}.`,edit:`Редагувати`,printLabels:`Друк етикеток`,resetUsage:`Скинути використання`,restore:`Відновити`,archive:`Архівувати`,delete:`Видалити`,clearSelection:`Очистити вибір`,editTitle:`Масове редагування котушок`,editSubtitle:`Застосовується до вибраних котушок {{count}}. Оновлюються лише ті поля, які ви позначите.`,editHint:`Введіть значення в поле, щоб позначити його для оновлення: буде надіслано лише позначені поля. Порожнє поле не змінює котушки; очистити поле можна лише під час редагування окремої котушки.`,useCustom:`Використати «{{value}}»`,toggleField:`Перемкнути оновлення для цього поля`,changeCount:`Буде оновлено полів: {{count}}`,applyPending:`Застосування...`,applyButton:`Застосувати до котушок ({{count}})`,deleteTitle:`Видалити вибрані котушки`,archiveTitle:`Архівувати вибрані котушки`,restoreTitle:`Відновити вибрані котушки`,resetUsageTitle:`Скинути використання на вибраних котушках`,deleteMessage:`Назавжди видалити котушки {{count}}? Це неможливо скасувати.`,archiveMessage:`Архівувати котушки {{count}}? Пізніше їх можна відновити.`,restoreMessage:`Відновити заархівовані котушки {{count}}?`,resetUsageMessage:`Скинути лічильник «Всього спожито» на котушках {{count}}? Залишок ваги зберігається.`,updateSuccess:`Котушок оновлено: {{count}}`,updateFailed:`Помилка масового оновлення`,updatePartial:`Оновлено: {{ok}}; не вдалося оновити: {{failed}}`,updateAllFailed:`Не вдалося оновити жодну з вибраних котушок ({{count}}). Вибір збережено для повторної спроби.`,deleteSuccess:`Котушок видалено: {{count}}`,deleteFailed:`Не вдалося масово видалити`,deletePartial:`Видалено: {{ok}}; не вдалося видалити: {{failed}}`,deleteAllFailed:`Не вдалося видалити жодну з вибраних котушок ({{count}}). Вибір збережено для повторної спроби.`,archiveSuccess:`Котушок заархівовано: {{count}}`,archiveFailed:`Помилка масового архівування`,archivePartial:`Заархівовано: {{ok}}; не вдалося заархівувати: {{failed}}`,archiveAllFailed:`Не вдалося заархівувати жодну з вибраних котушок ({{count}}). Вибір збережено для повторної спроби.`,restoreSuccess:`Котушок відновлено: {{count}}`,restoreFailed:`Помилка масового відновлення`,restorePartial:`Відновлено: {{ok}}; не вдалося відновити: {{failed}}`,restoreAllFailed:`Не вдалося відновити жодну з вибраних котушок ({{count}}). Вибір збережено для повторної спроби.`,invalidHex:`Введіть 6 шістнадцяткових символів (RRGGBB) або 8 (RRGGBBAA). Інакше поле не застосовуватиметься.`},spoolmanMixedContentTitle:`Spoolman не може Завантажити через HTTPS — змішаний вміст заблоковано вашим браузером`,spoolmanMixedContentBody:`Bambuddy обслуговується через HTTPS (через ваш зворотний проксі), але ваш Spoolman URL усе ще звичайний HTTP. Браузери блокують змішаний вміст для безпеки, тому вбудований Spoolman UI не може відтворюватися. Щоб це працювало, Spoolman має бути доступним через HTTPS.`,spoolmanMixedContentFixReverseProxy:`Розмістіть Spoolman за тим самим зворотним проксі, що й Bambuddy (Traefik / Nginx / Caddy) з HTTPS, а потім оновіть Spoolman URL у налаштуваннях до нової адреси HTTPS.`,spoolmanMixedContentFixOpenNewTab:`Як обхідний шлях, відкрийте Spoolman у новій вкладці браузера поверх HTTP — правила змішаного вмісту застосовуються лише до вбудованих фреймів, тому окрема вкладка все ще працює.`,spoolmanOpenInNewTab:`Відкрийте Spoolman у новій вкладці`,labels:{title:`Друк етикеток на котушках`,selectedCount:`Вибрано {{count}}.`,pickSpools:`Виберіть котушки для друку етикеток:`,monochrome:`Монохромний (чорно-білий принтер)`,monochromeHint:`Прибирає зразок кольору та розширює область тексту`,startingPosition:`Початкова позиція етикетки`,startingPositionRange:`Лише для аркушів: L7160 підтримує 1–21; 5160 підтримує 1–30.`,startingPositionInvalid:`Введіть ціле число від 1 до {{capacity}}.`,startingPositionFirst:`Друк починається з позиції 1.`,startingPositionSkipped:`Позиції від 1 до {{lastPosition}} залишаться порожніми на першому аркуші.`,startingPositionRangeError:`Початкова позиція для цього аркуша має бути від 1 до {{capacity}}.`,searchPlaceholder:`Шукайте назву, бренд або #ID`,filterByMaterial:`матеріал:`,allMaterials:`все`,selectVisible:`Вибрати все видиме ({{count}})`,deselectVisible:`Скасувати вибір видимого`,clearAll:`Очистити все`,noSpoolsToShow:`Немає котушок для показу. Налаштуйте фільтр і повторіть спробу.`,noMatches:`Жодна котушка не відповідає поточному пошуку чи фільтру.`,printOne:`Друк етикетки для цієї котушки`,printLabels:`Друк етикеток…`,bulkTitle:`Виберіть котушки для друку етикеток серед показаних ({{count}})`,noSpoolsTitle:`Немає котушок для маркування`,error:`Не вдалося створити мітки: {{msg}}`,sortBy:{label:`Сортувати:`,id:`За ідентифікатором`,color:`За кольором`},templates:{amsHolderSmall:{label:`Тримач AMS — малий (74 × 33 мм)`,hint:`Одна етикетка на сторінці; відповідає етикетці для друку від MakerWorld моделі 752566 (AMS Filament Label Holder).`},amsHolderLarge:{label:`Тримач AMS — великий (75 × 55 мм)`,hint:`Одна етикетка на сторінці; підходить для варіанту тримача етикеток із філаментом AMS із вкладенням картону. Досить місткий для зразка, бренду, матеріалу, ідентифікатора та QR-коду.`},box40x30:{label:`Етикетка коробки (40 × 30 мм)`,hint:`Одна етикетка на сторінці; звичайний розмір рулону DK/Brother, підходить для етикеток у пакетах із філаментом та контейнерах для зберігання.`},box:{label:`Етикетка коробки (62 × 29 мм)`,hint:`Одна етикетка на сторінці; розміром для маленьких етикеток Brother PT/QL і Dymo.`},averyL7160:{label:`Avery L7160 — аркуш А4 (38,1 × 63,5 мм × 21)`,hint:`Європейський аркуш; 21 етикетка на сторінці A4.`},avery5160:{label:`Avery 5160 — аркуш US Letter (25,4 × 66,7 мм × 30)`,hint:`Аркуш американського формату; 30 етикеток на сторінці Letter.`}}},csv:{importButton:`Імпорт CSV`,exportButton:`Експорт CSV`,modalTitle:`Імпорт котушок з CSV`,selectFile:`Виберіть файл CSV або перетягніть його сюди`,dragHint:`Заголовок: material (обов’язково), brand, subtype, color_name, rgba, …`,parsing:`Читання файлу…`,previewError:`Не вдалося прочитати файл CSV.`,validCount:`{{count}} дійсний`,errorCount:`{{count}} помилка`,skippedCount:`{{count}} пропущено`,colRow:`Рядок`,colStatus:`Статус`,colColor:`Колір`,colorResolved:`Кольорове заповнення з каталогу`,colorCrossMaterial:`Колір узятий з іншого матеріалу — точної відповідності в каталозі немає`,duplicateExisting:`Котушка з таким матеріалом, брендом і кольором вже є — вона ще буде імпортована як нова котушка`,spoolmanHint:`У режимі Spoolman використовуйте вбудовані засоби імпорту й експорту Spoolman.`,importValidRows:`Імпорт {{count}} дійсних рядків`,noValidRows:`Немає дійсних рядків`,importing:`Імпорт…`,importSuccess:`Імпортовано котушок: {{count}}`,importError:`Помилка імпорту`,exportError:`Помилка експорту`},addSpool:`Додати котушку`,editSpool:`Редагувати котушку`,copySpool:`Копіювати котушку`,material:`матеріал`,selectMaterial:`Виберіть матеріал...`,subtype:`Підтип`,brand:`Бренд`,searchBrand:`Шукати бренд...`,useCustomBrand:`Використовуйте "{{brand}}"`,useCustomMaterial:`Використовуйте спеціальний матеріал: {{material}}`,suggestedOptions:`Рекомендовані`,allOptions:`Усі`,colorName:`Назва кольору`,colorNamePlaceholder:`Нефритовий білий, вогненно-червоний...`,color:`Колір`,hexColor:`Шістнадцятковий колір`,pickColor:`Вибрати індивідуальний колір`,labelWeight:`Номінальна вага філаменту`,coreWeight:`Вага порожньої котушки`,searchSpoolWeight:`Шукати вагу котушки...`,weightUsed:`Використано`,currentWeight:`Вага, що залишилася`,measuredWeight:`Виміряна вага`,spoolName:`Котушка`,costPerKg:`Вартість за кг`,storageLocation:`Місце зберігання`,temperature:`Температура`,humidity:`Вологість`,battery:`Батарея`,storageLocationPlaceholder:`напр. Полиця А, ящик 1`,openInInventory:`Відкрити в інвентарі`,measuredWeightError:`Виміряна вага має бути між {{min}}g і {{max}}g.`,slicerFilament:`Філамент для нарізки`,slicerFilamentName:`Назва профілю слайсера`,slicerPreset:`Попереднє налаштування слайсера`,searchPresets:`Шукати профілі філаменту...`,selectedPreset:`Вибране`,noPresetsFound:`Попередніх налаштувань не знайдено`,tempOverrides:`Перевизначення температури`,note:`Примітка`,notePlaceholder:`Будь-які додаткові зауваження щодо цієї котушки...`,category:`Категорія`,categoryPlaceholder:`напр. Виробництво, прототип, клієнт А`,categoryNone:`Без категорії`,storageLocationNone:`Місцезнаходження не встановлено`,lowStockThresholdOverride:`Поріг низького запасу (ця котушка)`,lowStockThresholdOverrideHelp:`Залиште поле порожнім, щоб використовувати глобальне порогове значення ({{global}}%).`,clearRfid:`Очистити тег RFID.`,rfidCleared:`Тег RFID видалено`,archive:`Архівувати`,restore:`Відновити`,noSpools:`Ще немає котушок. Щоб почати, додайте свою першу котушку.`,noAvailableSpools:`Немає котушок. Додайте котушку до свого інвентарю або спершу скасуйте призначення іншого слота.`,kProfiles:`K-профілі`,addKProfile:`Додати K-профіль`,assignSpool:`Призначити котушку`,unassignSpool:`Скасувати призначення`,assignSuccess:`Котушку призначено, слот AMS налаштовано`,assignPendingInsert:`Котушку призначено. Слот буде налаштовано після її встановлення.`,assignFailed:`Не вдалося призначити котушку`,selectSpool:`Виберіть котушку, щоб призначити цьому слоту`,assigned:`Призначено`,assigning:`Призначення...`,searchSpools:`Пошук котушок...`,showAllSpools:`Показати всі котушки`,spoolmanSpools:`Котушки Spoolman`,allMaterials:`Усі матеріали`,filterByBrand:`Фільтрувати за брендом...`,showArchived:`Показати архівні`,quickAdd:`Швидке додавання (запас)`,quantity:`Кількість`,stock:`Запас`,configured:`Налаштовано`,spoolsCreated:`Створено котушок: {{count}}`,spoolsPartiallyCreated:`{{created}} з {{total}} котушок створено (деякі не вдалося)`,spoolCreated:`Котушку створено`,spoolUpdated:`Котушку оновлено`,spoolDeleted:`Котушку видалено`,deepLinkSpoolNotFound:`Котушку не знайдено`,deepLinkFetchFailed:`Не вдалося завантажити котушку — спробуйте ще раз`,spoolArchived:`Котушку заархівовано`,spoolRestored:`Котушку відновлено`,kProfileSaveFailed:`Не вдалося зберегти налаштування K-профілю`,syncWeightSpoolNotFound:`Котушку не знайдено — можливо, її видалено`,syncWeightSpoolmanUnreachable:`Spoolman недоступний — спробуйте пізніше`,syncWeightFailed:`Не вдалося синхронізувати вагу`,spoolmanUnreachable:`Spoolman недоступний — спробуйте пізніше`,deleteSpoolNotFound:`Котушку не знайдено — можливо, її вже видалено`,deleteFailed:`Не вдалося видалити котушку`,archiveSpoolNotFound:`Котушку не знайдено — можливо, її вже видалено`,archiveFailed:`Не вдалося заархівувати котушку`,restoreSpoolNotFound:`Котушку не знайдено — можливо, її вже видалено`,restoreFailed:`Не вдалося відновити котушку`,saveFailed:`Не вдалося зберегти зміни`,tagClearFailed:`Не вдалося очистити тег`,deleteConfirm:`Ви впевнені, що хочете видалити цю котушку? Це неможливо скасувати.`,archiveConfirm:`Ви впевнені, що хочете заархівувати цю котушку?`,advancedSettings:`Розширені налаштування`,filamentInfoTab:`Інформація про філамент`,paProfileTab:`Профіль PA`,colorAndCostTab:`Колір і вартість`,printersTab:`Принтери`,filamentInfo:`Філамент`,additional:`Додатково`,loadingPresets:`Завантаження хмарних профілів...`,cloudConnected:`Хмара підключена`,cloudNotConnected:`Хмара не підключена (за умовчанням)`,recentColors:`Останні`,searchColors:`Пошук кольорів...`,searchResults:`Результати пошуку`,allColors:`Всі кольори`,commonColors:`Поширені кольори`,showLess:`Показувати менше`,showAll:`Показати все`,noColorsFound:`Жоден колір не відповідає вашому запиту`,noResults:`Збігів не знайдено`,extraColorsLabel:`Додаткові кольори`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Вставте від 2 до 8 шістнадцяткових знаків, розділених комами. Візуалізація як градієнт.`,extraColorsInvalid:`Проігнорований недійсний шістнадцятковий код: {{tokens}}`,colorEffectLabel:`Ефект`,colorEffect:{none:`Жодного`,sparkle:`Блиск`,wood:`Деревина`,marble:`Мармур`,glow:`Світіння`,matte:`Матовий`,silk:`Шовк`,galaxy:`Галактика`,rainbow:`Веселка`,metal:`метал`,translucent:`Напівпрозорий`,gradient:`Градієнт`,dualColor:`Подвійний колір`,triColor:`Три кольори`,multicolor:`Багатобарвність`},selectMaterialFirst:`Спочатку виберіть матеріал на вкладці «Інформація про філамент».`,noPrintersConfigured:`Принтери не налаштовані. Додайте принтери для використання профілів PA.`,matchingFilter:`Зіставлення`,anyBrand:`Будь-який бренд`,anyVariant:`Будь-який варіант`,autoSelect:`Автоматичний вибір`,matches:`збіги`,match:`збіг`,noMatches:`Немає збігів`,connected:`Підключено`,offline:`Не в мережі`,printerOffline:`Принтер не в мережі. Підключіться, щоб переглянути профілі калібрування.`,noKProfilesMatch:`Немає K-профілів, що відповідають вибраному філаменту.`,leftNozzle:`Ліве сопло`,rightNozzle:`Праве сопло`,profilesSelected:`вибрані профілі калібрування`,filamentPreset:`Пресет філаменту`,presetUseSpoolDefault:`Використовувати пресет котушки`,presetInherited:`успадковано`,presetOverride:`перевизначено`,presetNeedsModel:`Цей принтер ще не повідомив свою модель, тому не може мати власний пресет.`,autoMatchPresets:`Підібрати автоматично`,autoMatchPresetsHint:`Знайти варіант пресета котушки, у назві якого вказано кожну модель`,kProfilesPerPrinter:`K-профілі`,kProfileNotSet:`Не задано`,kProfileFlowMismatch:`Цей профіль виміряно на соплі {{profile}}, але встановлено сопло {{fitted}}, тому його не буде застосовано`,nozzle:`Сопло`,unknownModel:`Невідома модель`,onePrinter:`1 принтер`,nPrinters:`Принтерів: {{n}}`,filamentPresetsLoadFailed:`Не вдалося завантажити пресети за моделями для цієї котушки`,filamentPresetSaveFailed:`Не вдалося зберегти пресети за моделями`,totalInventory:`Загальний запас`,totalConsumed:`Всього спожито`,byMaterial:`За матеріалом`,inPrinter:`У принтері`,lowStock:`Низький запас`,sinceTracking:`З початку відстеження`,resetConsumedCounter:`Скинути лічильник`,resetConsumedCounterTooltip:`Обнулити лічильник спожитих грамів для цієї котушки. Залишкова вага не зміниться.`,resetConsumedCounterConfirm:`Скинути лічильник спожитих грамів на 0? Майбутні роздруківки знову відстежуватимуться з нуля. Сама котушка, розрахунок її залишкової ваги та ваші налаштування не змінюються.`,resetAllConsumedCounters:`Обнулити всі лічильники`,resetAllConsumedCountersTooltip:`Обнулити лічильник спожитих грамів для кожної котушки. Залишкова вага не зміниться.`,resetAllConsumedCountersConfirm:`Скинути лічильники спожитих грамів до 0 для всіх котушок ({{count}}, включно з архівними)? Статистику «Всього спожито» буде очищено, а облік майбутніх друків почнеться з нуля. Самі котушки та їхня залишкова вага не зміняться.`,consumedCounterReset:`Скидання лічильника`,allConsumedCountersReset:`Скинуто лічильники котушок: {{count}}`,resetConsumedCounterFailed:`Не вдалося скинути лічильник`,loadedInAms:`Завантажено в AMS/Ext`,remaining:`Залишилося`,weightCheck:`Перевірка ваги`,lastWeighed:`Останнє зважування`,neverWeighed:`Ще не зважувалася`,search:`Пошук котушок...`,showing:`Показ`,to:`до`,of:`з`,show:`Показати`,spools:`котушки`,spool:`котушка`,page:`Сторінка`,noSpoolsMatch:`Результатів не знайдено`,noSpoolsMatchDesc:`Спробуйте налаштувати пошук або фільтри, щоб знайти те, що ви шукаєте.`,active:`Активний`,archived:`Архівовано`,all:`все`,used:`Використані`,new:`Нові`,clearFilters:`Очистити фільтри`,table:`Таблиця`,cards:`картки`,net:`Нетто`,groupSimilar:`Групувати`,groupedSpools:`Однакових котушок: {{count}}`,groupedRows:`рядки`,columns:`Стовпці`,configureColumns:`Налаштувати стовпці`,configureColumnsDesc:`Перетягніть, щоб змінити порядок стовпців, або використовуйте стрілки. Перемкніть видимість за допомогою значка ока.`,visible:`видно`,reset:`Скинути`,cancel:`Скасувати`,applyChanges:`Застосувати зміни`,moveUp:`Перемістити вгору`,moveDown:`Перемістити вниз`,hideColumn:`Сховати стовпець`,showColumn:`Показати стовпець`,linkToSpool:`Прив’язати до котушки`,tagLinked:`Тег пов’язано з котушкою`,tagLinkFailed:`Не вдалося зв’язати тег`,tagAlreadyLinked:`Тег уже пов’язано з котушкою #{{id}}`,unknownTag:`Виявлено невідомий тег RFID.`,usageHistory:`Історія використання`,noUsageHistory:`Використання ще не зареєстровано`,printName:`Назва друку`,weightConsumed:`Витрачена вага`,clearHistory:`Очистити`,historyCleared:`Історію використання очищено`,fillSourceLabel:`(Інвентар)`,lowStockThresholdError:`Порогове значення має бути від 0,1 до 99,9`,assignMismatchTitle:`Невідповідність матеріалу`,assignMismatchMessage:`Вибраний матеріал котушки "{{spoolMaterial}}" не відповідає матеріалу лотка "{{trayMaterial}}" для {{location}}. Все одно призначити?`,assignMismatchConfirm:`Все одно призначити`,assignPartialMismatchMessage:`Матеріал котушки "{{spoolMaterial}}" схожий на "{{trayMaterial}}" у {{location}}, але не зовсім відповідає. Ви бажаєте продовжити?`,assignProfileMismatchMessage:`Профіль котушки «{{spoolProfile}}» не відповідає профілю лотка «{{trayProfile}}» у {{location}}. Ви бажаєте продовжити?`,assignReconfigureNote:`Слот AMS буде переналаштовано для використання профілю котушки.`,spoolmanFilamentCatalog:`Каталог філаментів Spoolman`,pickFromSpoolmanCatalog:`Вибрати з каталогу Spoolman…`,spoolmanFilamentSelected:`Філамент вибрано з каталогу Spoolman`,spoolmanFilamentUnlinked:`Посилання на каталог філаментів видалено`,noSpoolmanFilaments:`У каталозі Spoolman не знайдено філаментів`,spoolmanFilamentColorSwatch:`Колір філаменту`,spoolWeightManagedBySpoolman:`Вага порожньої котушки керується залежно від типу філаменту в Spoolman`,spoolmanCatalogLoadFailed:`Не вдалося завантажити каталог філаментів Spoolman`},timelapse:{title:`Таймлапс`,create:`Створити Timelapse`,download:`Завантажити`,delete:`Видалити`,preview:`Попередній перегляд`,frameRate:`Частота кадрів`,quality:`якість`,processing:`Обробка...`,noTimelapses:`Немає таймлапсів`},ams:{title:`AMS`,slot:`Слот`,empty:`Порожній`,emptySlot:`Порожній слот`,slotEmpty:`Порожній`,slotUnconfigured:`?`,emptySlotReset:`Філамент не призначено`,unknown:`Невідомий`,humidity:`Вологість`,temperature:`температура`,filamentType:`Тип філаменту`,filamentColor:`Колір`,remaining:`Залишилося`,history:`AMS Історія`,noHistory:`Історія недоступна`,configureSlot:`Налаштувати слот`,externalSpool:`Зовнішня котушка`,profile:`Профіль`,kFactor:`Фактор K`,kFactorShort:`K`,fill:`Рівень заповнення`,configure:`Налаштувати`,used:`використовується`,remainingUnit:`залишилося`},printModal:{variants:{editNote:`Ці варіанти задано під час додавання в чергу. Щоб змінити, скасуйте та додайте знову.`,title:`Варіанти принтера`,help:`Одне завдання, одне місце в черзі. Перший відповідний принтер, що звільниться, надрукує свій файл.`,unknownModel:`Невідома модель`,plateFor:`Стіл для {{filename}}`,moveUp:`Вгору`,moveDown:`Вниз`,queued:`У черзі, варіантів: {{count}}`},selectPrinter:`Вибрати принтер`,selectPlate:`Вибрати пластину`,filamentMapping:`Зіставлення філаментів`,useArchiveMapping:`Зіставлення`,useArchiveMappingTooltip:`Вибрати всі слоти зі зіставлення AMS, збереженого з цим записом (зі слайсера), замість добору за типом/кольором.`,clickToChangeSlot:`Натисніть, щоб змінити призначення слота`,reRead:`Перечитати`,plateN:`Пластина {{n}}`,plateFilamentsUnreadable:`Не вдалося прочитати філаменти вибраної пластини, тому їх неможливо зіставити. Зніміть вибір із цієї пластини, щоб додати решту до черги.`,totalCost:`Загальна вартість:`,slotRemainingShort:` — залишилося {{grams}} г`,printSettings:`Налаштування друку`,bedLeveling:`Вирівнювання столу`,flowCalibration:`Калібрування потоку`,vibrationCalibration:`Калібрування вібрації`,layerInspection:`Перевірка першого шару`,timelapse:`Таймлапс`,cancel:`Скасувати`,noPrintersAvailable:`Немає доступних принтерів`,printerBusy:`Принтер зайнятий`,printerOffline:`Принтер не в мережі`,sameTypeDifferentColor:`Одного типу, іншого кольору`,filamentTypeNotLoaded:`Тип філаменту не завантажено`,statusReady:`Готово`,statusColorMismatch:`Колір не збігається`,statusTypeNotFound:`Тип не знайдено`,requiredTooltip:`Потрібно: {{name}} - {{color}}`,manuallySelected:`Вибрано вручну`,autoMatched:`Підібрано автоматично`,selectSlot:`Вибрати слот`,exactColorMatch:`Точний збіг кольору`,slotForFilament:`Слот принтера для {{name}}`,overrideForFilament:`Перевизначення філаменту для {{name}}`,sameTypeDifferentColorDetail:`Того самого типу, іншого кольору: потрібен {{required}}, у слоті {{loaded}}`,requiredTypeNotInPrinter:`Потрібний тип філаменту не знайдено у принтері.`,whenToPrint:`Коли друкувати`,asap:`Якнайшвидше`,queue:`Черга`,schedule:`За розкладом`,dateTime:`Дата й час`,invalidDateTime:`Введіть дійсну дату й час`,openCalendar:`Відкрити календар`,requireManualStart:`Потрібен ручний запуск`,requirePreviousSuccess:`Починати, лише якщо попередній друк вдався`,autoOffAfter:`Вимкнути принтер після завершення`,helpAsap:`Завдання буде додано на початок черги й розпочнеться, щойно відповідний принтер звільниться.`,helpSchedule:`Друк розпочнеться в запланований час, якщо принтер буде вільний. Якщо принтер зайнятий, завдання чекатиме, доки він звільниться.`,helpQueue:`Завдання буде додано в кінець черги.`,leftNozzle:`Л`,rightNozzle:`Р`,leftNozzleTooltip:`Ліве сопло`,rightNozzleTooltip:`Праве сопло`,ftsSameInletHint:`Усі філаменти для цього друку підключені до перемикача тракту філаменту IN-{{inlet}}. Зміна між філаментами на одному вході повільніша — перемістіть один в AMS на іншому вході.`,rackPosition:`Позиція у стійці`,rackPositionTooltip:`Яким соплом зі стійки друкувати цей філамент. Позиції нумеруються так само, як на принтері.`,rackEmptyPosition:`Ця позиція у стійці порожня`,rackWrongNozzle:`Встановлено сопло {{has}}; цьому філаменту потрібно {{needs}}`,filamentOverride:`Перевизначення філаменту`,filamentOverrideHint:`Необов’язково замініть філаменти для призначення на основі моделі. Планувальник зіставлятиметься з вибраними філаментами замість вихідних значень 3MF.`,originalFilament:`Оригінал`,overrideWith:`Перевизначити за допомогою`,resetToOriginal:`Скинути до оригіналу`,insufficientFilamentTitle:`Недостатньо філаменту`,waitingForAmsStatus:`Очікування статусу AMS від {{printer}}…`,insufficientFilamentMessage:`У деяких призначених котушках залишилося менше філаменту, ніж потрібно для друку:`,insufficientFilamentLine:`{{printer}} - {{slot}}: потрібно {{required}}g, залишилося {{remaining}}g`,insufficientFilamentLinePooled:`{{printer}} - {{slot}}: потрібно {{required}}g, доступно {{remaining}}g на відповідних котушках (резервне перемикання філаменту AMS)`,printAnyway:`Усе одно друкувати`,forceColorMatch:`Примусовий збіг кольорів`,staggerPrinterStarts:`Запускати принтери почергово`,staggerGroupSize:`Розмір групи`,staggerInterval:`Інтервал (хв)`,staggerPreview:`Принтерів: {{printers}} → груп: {{groups}}, по {{size}}; інтервал запуску — {{interval}} хв`,staggerLastGroup:`остання група: {{count}}`,staggerTotal:`всього: {{minutes}} хв`,staggerToPrinters:`Розподілити запуск між {{count}} принтерами`,gcodeInjection:`Додати G-код автоматичного друку`,insufficientBudget:`Недостатньо бюджету`,unlimitedNoBudget:`Без обмежень — ліміт бюджету не встановлено.`,noPrintableCostCenters:`Немає активного центру витрат, доступного для друку. Попросіть адміністратора надати вам доступ до друку.`},backup:{includesEncryptionKey:`Локальні резервні копії включають файл ключа шифрування MFA (DATA_DIR/.mfa_encryption_key), тому резервна копія ZIP є автономною. Вважайте ZIP конфіденційним — кожен, хто має файл, може розшифрувати секрети клієнта OIDC і секрети TOTP, що зберігаються в ньому.`,title:`Резервне копіювання та відновлення`,createBackup:`Створити резервну копію`,restoreBackup:`Відновити резервну копію`,restoreDescription:`Замінити всі дані даними з файлу резервної копії`,downloadBackup:`Завантажити резервну копію`,uploadBackup:`Вивантажити резервну копію`,lastBackup:`Остання резервна копія`,autoBackup:`Автоматичне резервне копіювання`,backupNow:`Створити резервну копію зараз`,restoreWarning:`Увага: відновлення резервної копії перезапише всі поточні дані.`,includeArchives:`Включати архіви`,includeSettings:`Включити налаштування`,includeProfiles:`Включити профілі`,backupSuccess:`Резервну копію створено успішно`,restoreSuccess:`Резервну копію успішно відновлено`,backupFailed:`Помилка резервного копіювання`,restoreFailed:`Не вдалося відновити`,restoreNote:`Віртуальний принтер буде зупинено під час відновлення`,githubBackup:`Резервне копіювання Git`,enabled:`Увімкнено`,cloudLoginRequired:`Потрібно ввійти в Bambu Cloud. Перейдіть до Профілі → Хмарні профілі, щоб увімкнути резервне копіювання до GitHub.`,cloudLoginRequiredShort:`Потрібен вхід у хмару`,githubDescription:`Автоматично синхронізуйте свої профілі з приватним репозиторієм GitHub для резервного копіювання та історії версій.`,repoIsPrivate:`Репозиторій приватний — безпечно створювати резервні копії.`,repoIsPublicWarning:`Репозиторій є ПУБЛІЧНИМ. Резервні копії Bambuddy містять облікові дані MQTT, токени Home Assistant, токени Prometheus, вашу електронну пошту Bambu Cloud і коди доступу до принтера через K-профілі. Збереження блокується, доки ви не зробите репозиторій приватним у налаштуваннях постачальника.`,repoVisibilityUnknown:`Не вдалося визначити видимість репозиторію. Bambuddy створює резервні копії лише в підтверджено приватних репозиторіях, тому збереження буде заблоковано.`,repositoryUrl:`URL репозиторію`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Дозволити незахищений HTTP`,allowInsecureHttpHint:`Увімкнути для саморозміщених екземплярів у приватних мережах без TLS`,personalAccessToken:`Персональний токен доступу`,tokenSaved:`(збережено)`,enterNewToken:`Введіть новий токен для оновлення`,tokenHintGitHub:`Токен із деталізованими правами на читання й запис Contents або класичний токен з областю repo.`,tokenHintGitLab:`Токен з областю api або read_repository разом із write_repository.`,tokenHintGitea:`Токен з областю write:repository.`,tokenHintForgejo:`Токен з областю write:repository. Достатньо токена, обмеженого лише цим репозиторієм.`,branch:`Гілка`,provider:`Постачальник Git`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Тільки вручну`,hourly:`щогодини`,daily:`Щодня`,weekly:`Щотижня`,includeInBackup:`Включити в резервну копію`,kProfiles:`K-профілі`,kProfilesDescription:`Калібрування Pressure Advance (PA) від підключених принтерів`,noPrintersConnected:`Немає підключених принтерів`,printersConnected:`{{connected}}/{{total}} підключено`,cloudProfiles:`Хмарні профілі`,cloudProfilesDescription:`Попередні налаштування філаменту, принтера та процесу від Bambu Cloud і Orca Cloud`,cloudProfilesAccounts:`Підключені акаунти — Bambu Cloud: {{bambu}}, Orca Cloud: {{orca}}`,appSettings:`Налаштування програми`,appSettingsDescription:`Конфігурація Bambuddy (повна база даних)`,spoolInventory:`Облік котушок`,spoolInventoryDescription:`Котушки з філаментом, історія використання та відстеження витрат`,printArchives:`Архіви друку`,printArchivesDescription:`Метадані історії друку (без файлів gcode/3MF)`,lastBackupAt:`Остання резервна копія:`,noBackupsYet:`Резервних копій ще немає`,next:`Наступне виконання:`,startingBackup:`Початок резервного копіювання...`,test:`Тест`,enableBackup:`Увімкнути резервне копіювання`,testConnection:`Тестове підключення`,enterRepoUrl:`Введіть URL репозиторію`,enterRepoAndToken:`Введіть URL репозиторію та токен доступу`,repoRequired:`Потрібно вказати URL репозиторію`,tokenRequired:`Потрібен токен доступу`,githubBackupEnabled:`GitHub резервне копіювання ввімкнено`,tokenUpdated:`Токен оновлено`,settingsSaved:`Налаштування збережено`,failedToSave:`Не вдалося зберегти: {{message}}`,backupCompleteFiles:`Резервне копіювання завершено – файли {{count}} оновлено`,backupSkippedNoChanges:`Резервне копіювання пропущено – без змін`,backupFailed2:`Помилка резервного копіювання: {{message}}`,clearedLogs:`Очищено журнали {{count}}.`,failedToClearLogs:`Не вдалося очистити журнали: {{message}}`,restoreFromGit:{button:`Відновити з Git`,title:`Відновлення з резервної копії Git`,subtitle:`Виберіть коміт і вкажіть, що відновити`,commitLabel:`Коміт резервної копії`,latestCommit:`Остання резервна копія (вершина гілки)`,categoriesLabel:`Що відновити`,inspecting:`Читання вмісту резервної копії...`,itemCount:`{{count}} у резервній копії`,overwriteLabel:`Перезаписувати наявні записи`,overwriteOn:`Наявні записи буде оновлено з резервної копії.`,overwriteOff:`Додаються лише відсутні записи; наявні залишаються без змін.`,selectedCount:`Вибрано: {{count}}`,restoring:`Відновлення...`,confirmTitle:`Відновити з резервної копії?`,confirmMessage:`Вибрані категорії буде відновлено з цього коміту. Відсутні записи буде додано, наявні залишаться без змін.`,confirmMessageOverwrite:`Вибрані категорії буде відновлено з цього коміту з перезаписом записів, які вже існують локально. Цю дію не можна скасувати.`,kprofilesOverwriteCaveat:`K-профілі — виняток: запис у слот завжди замінює калібрування на принтері.`,tally:`відновлено: {{restored}}, пропущено: {{skipped}}, з помилкою: {{failed}}`,reloadHint:`Перезавантажте Bambuddy, щоб відновлені дані відобразилися всюди.`,partialHint:`Перелічені вище категорії завершено та збережено. Відсутні категорії не виконувалися.`,failed:`Не вдалося виконати відновлення.`,loadFailed:`Не вдалося прочитати репозиторій резервних копій.`,details:{notPresent:`Відсутнє в цьому коміті резервної копії`,unreadableJson:`Нечитабельний JSON: {{paths}}`,settingsNoPayload:`У даних немає налаштувань`,settingsCredentialsWillSkip:`Ключів, схожих на облікові дані, буде пропущено: {{count}}`,settingsCompanionWillSkip:`Ключів, схожих на облікові дані, буде пропущено: {{count}}, а залежні від них перемикачі ({{companion}}) залишаться вимкненими`,settingsCompanionOnlyWillSkip:`Перемикачі ({{companion}}) залишаться вимкненими - облікові дані, потрібні кожному з них, не можна відновити з резервної копії`,spoolsUsageCount:`включно із записами використання: {{count}}`,archivesMetadataOnly:`Лише метадані - файли 3MF і мініатюри не входять до резервної копії Git`,kprofilesPrinterCount:`по {{count}} принтерах`},notes:{noData:`У цій резервній копії немає даних такого типу`,archivesPrinterMissing:`Деякі архіви посилалися на принтери, яких більше немає - зв'язок очищено`,archivesProjectMissing:`Деякі архіви посилалися на проєкти, яких більше немає - зв'язок очищено`,archivesOwnerCleared:`Деякі архіви посилалися на користувачів, яких більше немає - власника очищено, тому вони видимі лише користувачам із дозволом archives:read_all, доки адміністратор не призначить власника знову`,archivesOwnerUnmatched:`Деякі архіви вказують власника, якого немає в цьому екземплярі - власника очищено, а не вгадано за ідентифікатором користувача з резервної копії, тому вони видимі лише користувачам із дозволом archives:read_all, доки адміністратор не призначить власника знову`,archivesOwnerUnknown:`Деякі архіви відновлено без власника - у цій резервній копії його не записано, тому вони видимі лише користувачам із дозволом archives:read_all, доки адміністратор не призначить власника`,archivesUndeleted:`Архіви, видалені після резервного копіювання, знову видимі - перезапис був увімкнений`,archivesMetadataOnly:`Відновлені архіви містять лише метадані - файли 3MF і мініатюри не входять до резервної копії Git`,spoolUsageUnresolved:`Записів використання пропущено: {{count}} - їхньої котушки немає у списку котушок цієї резервної копії, тож немає до чого їх прив'язати.`,spoolUsageUnlinked:`Записів використання відновлено без зв'язку з історією друку: {{count}} - виберіть «Архіви друку» разом з «Інвентарем котушок», щоб зберегти зв'язок.`,spoolTagKept:`Міток котушок залишено без змін: {{count}} - резервна копія стерла б мітку, відскановану пізніше, або перенесла б її на іншу котушку.`,settingsCredentialsSkipped:`Ключів, схожих на облікові дані, пропущено: {{count}} - введіть секрети вручну`,settingsAuthSkipped:`Налаштувань автентифікації пропущено: {{count}} - змінюйте їх у розділі «Налаштування > Автентифікація», щоб перевірки блокування й далі працювали`,settingsCompanionSkipped:`{{keys}} залишено вимкненими - потрібні їм облікові дані не можна відновити з резервної копії, і в цьому екземплярі вони не збережені, тож увімкнення залишило б інтеграцію без автентифікації`,settingsMqttRelayFailed:`Налаштування MQTT відновлено, але реле не вдалося перепідключити - перезапустіть Bambuddy`,kprofilesAlwaysOverwrite:`K-профілі завжди перезаписують відповідний слот на принтері`,kprofilesAckUnreliable:`Принтер, який не відповідає, усе одно вважається відновленим - перевірте профілі на принтері`,kprofilesPrinterMissing:`Немає принтера із серійним номером {{serial}} - пропущено`,kprofilesPrinterOffline:`{{printer}} ({{serial}}) не підключено - пропущено`,kprofilesUnknownNozzle:`Неочікуваний діаметр сопла {{nozzle}} для {{serial}} - надіслано як є`,kprofilesUnmatched:`Профілів для {{nozzle}} без відповідника на {{printer}}: {{count}} - додано як нові профілі`,kprofilesSendFailed:`Не вдалося надіслати профілі {{nozzle}} на {{printer}} ({{serial}})`,kprofilesRefused:`{{printer}} ({{serial}}) відхилив профілі {{nozzle}}: {{reason}}`,kprofilesStepFailed:`Не вдалося завершити етап K-профілів - {{reason}}. Усе, що було відновлено до нього, збережено.`}},history:`історія`,clear:`Очистити`,date:`Дата`,status:`Статус`,trigger:`Тип`,triggers:{manual:`Резервна копія (вручну)`,scheduled:`Резервна копія (за розкладом)`,restore:`Відновлення`},commit:`Коміт`,localBackup:`Локальна резервна копія`,localBackupDescription:`Створити повну резервну копію даних Bambuddy, включно з базою даних, архівами, вивантаженнями та всіма файлами.`,downloadBackupLabel:`Завантажити резервну копію`,completeBackupZip:`Повне резервне копіювання: база даних + усі файли (ZIP)`,download:`Завантажити`,preparingBackup:`Підготовка резервної копії...`,creatingArchive:`Створення резервного архіву... Для великих архівів це може зайняти деякий час.`,downloadingFile:`Завантаження файлу резервної копії...`,backupDownloaded:`Резервну копію успішно завантажено`,failedToCreateBackup:`Не вдалося створити резервну копію: {{message}}`,restore:`Відновити`,restoreReplacesAll:`Відновлення замінює всі дані.`,restoreReplacesAllDetail:`Вашу поточну базу даних і файли буде повністю замінено. Після відновлення потрібен перезапуск.`,restoreConfirmTitle:`Відновити резервну копію`,restoreConfirmMessage:`Ви впевнені, що бажаєте відновити з "{{filename}}"? Це повністю замінить вашу поточну базу даних і всі файли. Після відновлення програму потрібно буде перезапустити.`,restoreConfirmButton:`Відновити резервну копію`,uploadingFile:`Вивантаження файлу резервної копії...`,backupRestoredRestart:`Резервну копію відновлено. Перезапустіть Bambuddy.`,failedToRestore:`Не вдалося відновити резервну копію. Будь ласка, перевірте формат файлу.`,reloadNow:`Перезавантажити зараз`,creatingBackup:`Створення резервної копії`,restoringBackup:`Відновлення з резервної копії`,preparing:`Підготовка...`,processing:`Обробка...`,doNotClosePage:`Будь ласка, не закривайте цю сторінку та не виходьте з неї. Для великих резервних копій ця операція може зайняти кілька хвилин.`,restoring:`Відновлення...`,restoreComplete:`Відновлення завершено`,restoreFailed2:`Не вдалося відновити`,importSettings:`Імпорт налаштувань із файлу резервної копії`,pleaseWaitRestoring:`Зачекайте, поки ваші дані відновляться`,selectBackupFile:`Натисніть, щоб вибрати файл резервної копії (.json або .zip)`,duplicateHandling:`Як працює обробка дублікатів:`,matchPrinters:`Принтери`,matchPrintersBy:`відповідає серійному номеру`,matchSmartPlugs:`Розумні розетки`,matchSmartPlugsBy:`зіставляються за IP-адресою`,matchNotificationProviders:`Постачальники сповіщень`,matchNotificationProvidersBy:`відповідність за назвою`,matchFilaments:`філаменти`,matchFilamentsBy:`відповідність за назвою + типом + брендом`,matchArchives:`Архіви`,matchArchivesBy:`відповідає хешу вмісту (завжди пропускається)`,matchPendingUploads:`Вивантаження, що очікують`,matchPendingUploadsBy:`зіставляються за назвою файлу`,matchSettingsTemplates:`Налаштування та шаблони`,matchSettingsTemplatesBy:`завжди перезаписується`,replaceExisting:`Замінити існуючі дані`,keepExisting:`Зберегти наявні дані`,overwriteDescription:`Замінити наявні елементи даними з резервної копії`,keepDescription:`Відновлюйте лише елементи, яких ще не існує`,overwriteCaution:`Увага:`,overwriteWarning:`Перезапис замінить ваші поточні конфігурації даними з резервної копії. Коди доступу до принтера ніколи не перезаписуються з міркувань безпеки.`,cancel:`Скасувати`,processingBackup:`Обробка файлу резервної копії...`,itemsRestored:`Елементів відновлено`,itemsSkipped:`Пропущено елементів`,restored:`Відновлено`,skippedAlreadyExist:`Пропущено (вже існує)`,filesCategory:`Файли (3MF, мініатюри тощо)`,andMore:`…і ще {{count}}`,newApiKeysGenerated:`Створено нові API ключі`,keysShownOnce:`Ці ключі відображаються лише один раз. Скопіюйте їх зараз!`,copy:`Копіювати`,noDataFound:`У файлі резервної копії не знайдено даних для відновлення.`,close:`Закрити`,scheduledBackup:`Резервне копіювання за розкладом`,scheduledBackupDescription:`Автоматично створюйте резервні знімки за розкладом. Вихідний каталог можна підключити до NAS або зовнішнього накопичувача.`,frequency:`Частота`,backupTime:`час`,retention:`Термін зберігання`,retentionDescription:`Кількість резервних копій, які потрібно зберегти`,outputPath:`Вихідний шлях`,outputPathPlaceholder:`За замовчуванням: {{path}}`,outputPathDescription:`Залиште порожнім для розташування за умовчанням`,runNow:`Запустити зараз`,backupFiles:`Файли резервних копій`,noScheduledBackups:`Резервних копій ще немає`,deleteBackup:`Видалити`,deleteBackupConfirm:`Видалити цей файл резервної копії?`,backupRunning:`Виконується резервне копіювання...`,scheduledBackupComplete:`Резервне копіювання успішно завершено`,scheduledBackupFailed:`Помилка резервного копіювання`,nextBackup:`Наступна резервна копія`,backupSize:`Розмір`,localTimeHint:`Місцевий час ({{tz}})`,defaultPathLabel:`За замовчуванням:`,pathCheck:{title:`Bambuddy не може писати в цей каталог`,howToFix:`Як виправити:`,sandboxed:`Служба Bambuddy не може писати в {{path}}. Його модуль systemd працює з ProtectSystem=strict, що робить кожен каталог за межами каталогів встановлення, даних і журналу доступними лише для читання для служби — навіть той, у який ви можете писати з власної оболонки.`,read_only:`{{path}} знаходиться у файловій системі лише для читання.`,permission_denied:`Bambuddy не має права записувати в {{path}}. Перевірте власника каталогу та дозволи.`,no_space:`У файловій системі, де розташовано {{path}}, закінчилося місце.`,not_a_directory:`{{path}} існує, але не є каталогом.`,missing:`{{path}} не існує і не може бути створений.`,error:`Bambuddy не може писати в {{path}}.`,ephemeralTitle:`Ці резервні копії не збережуться після перезапуску контейнера`,container_ephemeral:`{{path}} розташовано всередині контейнера Bambuddy, а не на хості. Резервні копії в цьому каталозі буде втрачено після повторного створення контейнера. Змонтуйте каталог із хоста:`},categories:{settings:`Налаштування`,notification_providers:`Постачальники сповіщень`,notification_templates:`Шаблони сповіщень`,smart_plugs:`Розумні розетки`,printers:`Принтери`,filaments:`філаменти`,maintenance_types:`Види технічного обслуговування`,archives:`Архіви`,projects:`Проєкти`,pending_uploads:`Вивантаження, що очікують`,external_links:`Зовнішні посилання`,api_keys:`Ключі API`}},tags:{title:`Теги`,addTag:`Додати тег`,editTag:`Редагувати тег`,deleteTag:`Видалити тег`,tagName:`Назва тегу`,tagColor:`Колір мітки`,noTags:`Без тегів`,deleteConfirm:`Ви впевнені, що бажаєте видалити цей тег?`,manageTags:`Керування тегами`},uploadModal:{title:`Вивантажити файли 3MF`,dragDrop:`Перетягніть файли .3mf сюди`,or:`або`,browseFiles:`Огляд файлів`,extractionInfo:`Модель принтера буде автоматично витягнуто з метаданих файлу 3MF.`,uploaded:`вивантажено`,failed:`не вдалося`,uploading:`Вивантаження...`,upload:`Вивантажити`,uploadFailed:`Не вдалося вивантажити`},editArchive:{title:`Редагувати архів`,name:`Назва`,namePlaceholder:`Друкування імені`,printer:`Принтер`,noPrinter:`Немає принтера`,project:`Проєкт`,noProject:`Жодного проєкту`,itemsPrinted:`Надруковано об’єктів`,itemsPrintedHelp:`Кількість елементів, виготовлених у цьому завданні друку. Укажіть 0, якщо зіпсовано всю пластину.`,filamentUsed:`Витрачений філамент (г)`,filamentUsedPlaceholder:`напр. 46.16`,filamentUsedHelp:`Вкажіть вручну, якщо друк заархівовано без 3MF — тоді він потрапить до підсумків з філаменту. Повторне сканування архіву, який має 3MF, зчитує значення з файлу.`,notes:`Примітки`,notesPlaceholder:`Додайте примітки щодо цього друку...`,externalLink:`Зовнішнє посилання`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Посилання на Printables, Thingiverse або інше джерело`,tags:`Теги`,tagsPlaceholder:`Додати теги...`,addMoreTags:`Додати більше тегів...`,matchingTags:`Відповідає "{{query}}"`,existingTags:`Існуючі теги`,clickToAdd:`(натисніть, щоб додати)`,status:`Статус`,failureReason:`Причина невдачі`,selectReason:`Виберіть причину...`,photos:`Фотографії надрукованих результатів`,photosHelp:`Натисніть +, щоб додати фотографії результату друку`,printResult:`Роздрукувати результат`,saving:`Збереження...`,failureReasons:{adhesionFailure:`Порушення адгезії`,spaghettiDetached:`Спагетті / Відр`,layerShift:`Зсув шару`,cloggedNozzle:`Засмічене сопло`,filamentRunout:`Биття філаменту`,warping:`Викривлення`,stringing:`Нанизування`,underExtrusion:`Підвидавлювання`,powerFailure:`Збій живлення`,userCancelled:`Користувач скасовано`,noStatusUpdate:`Оновлення статусу не отримано`,other:`інше`},statuses:{completed:`Виконано`,failed:`Не вдалося`,aborted:`Скасовано`,printing:`Друк`}},kProfiles:{title:`K-профілі`,noPrintersConfigured:`Принтери не налаштовані`,addPrinterInSettings:`Додайте принтер у налаштуваннях, щоб керувати K-профілями`,noActivePrinters:`Немає активних принтерів`,enablePrinterConnection:`Увімкніть підключення до принтера, щоб переглянути його K-профілі`,loadingProfiles:`Завантаження K-профілів...`,printerOffline:`Принтер не в мережі`,printerOfflineDesc:`Вибраний принтер не підключено. Увімкніть його, щоб переглянути K-профілі.`,noMatchingProfiles:`Немає відповідних профілів`,noMatchingProfilesDesc:`Немає профілів, які відповідають вашим критеріям пошуку`,noKProfiles:`Без K-профілів`,noKProfilesDesc:`Не знайдено профілів підвищення тиску для сопла {{diameter}} мм`,createFirstProfile:`Створити перший профіль`,printer:`Принтер`,nozzle:`Сопло`,refresh:`Оновити`,addProfile:`Додати профіль`,export:`Експорт`,import:`Імпорт`,select:`Вибрати`,selectAll:`Вибрати усі`,delete:`Видалити`,searchPlaceholder:`Пошук за назвою або філаментом...`,allExtruders:`Всі екструдери`,leftOnly:`Тільки зліва`,rightOnly:`Тільки право`,allFlow:`Весь потік`,hfOnly:`Тільки HF`,sOnly:`Тільки S`,sortName:`Сортувати за назвою`,sortKValue:`Сортувати: К-значення`,sortFilament:`Сорт: філамент`,leftExtruder:`Лівий екструдер`,rightExtruder:`Правий екструдер`,modal:{addTitle:`Додати K-профіль`,editTitle:`Редагувати K-профіль`,profileName:`Назва профілю`,profileNamePlaceholder:`Мій профіль PLA.`,kValue:`К-значення`,kValuePlaceholder:`0,020`,kValueHelp:`Типовий діапазон: 0,01–0,06 для PLA, 0,02–0,10 для PETG`,filament:`Філамент`,selectFilament:`Виберіть філамент...`,source:{local:`Імпортовані`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,builtin:`Вбудований`},noFilamentsHelp:`Немає доступних філаментів. Увійдіть у Bambu Cloud або імпортуйте пресети в розділі Профілі → Локальні профілі.`,searchFilaments:`Пошук філаментів...`,noFilamentMatches:`Немає філаментів, що відповідають запиту`,flowType:`Тип потоку`,highFlow:`Сопло з високим потоком`,standard:`Стандартний`,nozzleSize:`Розмір сопла`,extruder:`Екструдер`,extruders:`Екструдери`,left:`Ліворуч`,right:`правильно`,notes:`Примітки (зберігаються локально)`,notesPlaceholder:`Додайте примітки щодо цього профілю...`,notesHelp:`Примітки зберігаються в Bambuddy, а не на принтері`,syncing:`Синхронізація з принтером...`,savingExtruder:`Збереження в екструдер {{current}}/{{total}}...`,pleaseWait:`Будь ласка, зачекайте`},deleteConfirm:{title:`Видалити профіль`,cannotUndo:`Це неможливо скасувати`,message:`Ви впевнені, що хочете видалити "{{name}}" із принтера?`},bulkDelete:{title:`Видалити профілі`,cannotUndo:`Це неможливо скасувати`,message:`Ви впевнені, що бажаєте видалити {{count}} вибрані профілі з принтера?`},toast:{profileSaved:`K-профіль збережено`,profilesSaved:`K-профіль збережено в екструдери {{count}}.`,selectAtLeastOneExtruder:`Виберіть принаймні один екструдер`,selectFilament:`Спочатку виберіть філамент`,filamentNotResolvable:`Немає ідентифікатора філаменту Bambu для {{name}} — принтер не зможе зберегти профіль`,profileDeleted:`K-профіль видалено`,profilesDeleted:`Видалені профілі {{count}}.`,exportedProfiles:`Експортовані профілі {{count}}.`,importedProfiles:`Імпортовано {{count}} з {{total}} профілів`,noProfilesToExport:`Немає профілів для експорту`,invalidFileFormat:`Недійсний формат файлу`,failedToParseImport:`Не вдалося проаналізувати імпортований файл`,failedToSaveBatch:`Не вдалося зберегти K-профілі`,noteSaved:`Нотатку збережено`,failedToSaveNote:`Не вдалося зберегти нотатку`},permission:{noRead:`Ви не маєте дозволу оновлювати профілі`,noCreate:`Ви не маєте дозволу додавати профілі`,noUpdate:`Ви не маєте дозволу на оновлення K-профілів`,noDelete:`Ви не маєте дозволу на видалення K-профілів`,noExport:`Ви не маєте дозволу на експорт профілів`,noImport:`Ви не маєте дозволу на імпорт профілів`}},virtualPrinter:{title:`Віртуальний принтер`,running:`Працює`,stopped:`Зупинено`,description:{default:`Увімкніть віртуальний принтер, який відображатиметься в Bambu Studio та OrcaSlicer. Надіслані на нього файли буде одразу заархівовано без друку.`,proxy:`Увімкніть проксі, який передає трафік слайсера на реальний принтер і дає змогу друкувати віддалено через будь-яку мережу.`},enable:{title:`Увімкнути віртуальний принтер`,visibleInSlicer:`Відображається як "Bambuddy" у виявленні слайсера`,proxyingTo:`Проксування до {{name}}`,notActive:`Неактивний`},model:{title:`Модель принтера`,description:`Виберіть модель принтера для емуляції.`,restartWarning:`Зміна моделі перезапустить віртуальний принтер`},accessCode:{title:`Код доступу`,isSet:`Код доступу встановлено`,notSet:`Немає встановленого коду доступу – потрібно для ввімкнення`,placeholder:`Введіть 8-символьний код`,placeholderChange:`Введіть новий код для зміни`,hint:`Має бути рівно 8 символів. Використовується слайсерами для автентифікації.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Успадковано від цільового принтера`,derivedFromTargetHint:`Використовує код доступу цільового принтера. Міст пересилає автентифікацію слайсера на справжній принтер, тому коди мають збігатися — відредагуйте код доступу принтера, щоб змінити це значення.`,reveal:`Показати код доступу`,hide:`Приховати код доступу`},targetPrinter:{title:`Цільовий принтер`,configured:`Ціль проксі налаштовано`,notConfigured:`Цільовий принтер не вибрано – потрібен для режиму проксі`,placeholder:`Виберіть принтер...`,hint:`Виберіть принтер, на який проксі передаватиме трафік слайсера. Принтер має працювати в режимі LAN.`,noPrinters:`Принтери не налаштовані. Щоб використовувати режим проксі, спочатку додайте принтер.`},remoteInterface:{title:`Перевизначення мережевого інтерфейсу`,configured:`Перевизначення інтерфейсу активне`,optional:`Необов’язково – використовуйте, якщо автоматичне визначення IP є неправильним (наприклад, кілька мережевих карток, Docker, VPN)`,placeholder:`Автоматичне визначення (за замовчуванням)...`,hint:`Заміна адреси IP, яка оголошується через SSDP і використовується в сертифікаті TLS. Корисно, коли Bambuddy має кілька мережевих інтерфейсів.`},mode:{title:`Режим`,archive:`Архів`,archiveDesc:`Одразу архівувати файли`,review:`Перевірка`,reviewDesc:`Перевіряти перед архівуванням`,queue:`Черга`,queueDesc:`Архівувати та додати в чергу`,proxy:`Проксі`,proxyDesc:`Пересилати на фізичний принтер`},autoDispatch:{title:`Автоматичний запуск`,description:`Автоматично запускати завдання після додавання до черги. Якщо вимкнено, завдання чекатимуть ручного запуску.`},queueForceColorMatch:{title:`Примусовий збіг кольорів`,description:`Не надсилати завдання на принтер без філаменту точного типу й кольору. Типово вимкнено: без цього черга зіставляє лише модель і може вибрати принтер із філаментом іншого кольору.`},saveAmsMapping:{title:`Зберігати зіставлення AMS`,description:`Зберігати в записі вибір слота AMS, зроблений самим слайсером (з MQTT-команди project_file), щоб пізніший повторний друк використав ту саму фізичну котушку замість повторного визначення за типом/кольором файлу. Типово вимкнено.`},gcodeInjection:{title:`Вставлення G-коду`,description:`Застосовувати до завдань цього віртуального принтера фрагменти G-коду, налаштовані для кожної моделі. Типово вимкнено.`},tailscaleDisabled:{title:`Інтеграція з Tailscale`,description:`Увімкніть, щоб позначити цей віртуальний принтер як доступний через Tailscale. Буде показано Tailscale-адресу хоста, яку потрібно ввести в слайсері. Імпорт сертифіката ЦС залишається обов’язковим; цей перемикач не впливає на сертифікати.`},setupRequired:{title:`Потрібне налаштування`,description:`Для роботи функції віртуального принтера потрібна додаткова конфігурація системи. Це включає переадресацію портів, правила брандмауера та параметри, що стосуються платформи.`,readGuide:`Перед увімкненням прочитайте посібник із налаштування`},archiveNameSource:{title:`Джерело назви архіву`,description:`Виберіть, як називати нові архіви, що надходять через віртуальний принтер. «Метадані» використовують вбудоване слайсером поле Title з 3MF (типовий варіант). «Назва файлу» використовує назву, яку Bambu Studio надіслала через FTP. За наявності поля Title Bambu Studio замінює ним назву, введену у вікні «Надіслати на принтер», тому обидва режими часто дають однаковий результат.`,metadata:`Метадані`,filename:`Назва файлу`},caCert:{title:`Сертифікат слайсера`,description:`Віртуальні принтери використовують сертифікат TLS, підписаний ЦС Bambuddy. Імпортуйте цей сертифікат ЦС у довірче сховище вашого слайсера, щоб він прийняв з’єднання — не потрібно копіювати його з командного рядка.`,copy:`Копіювати`,copied:`Скопійовано`,download:`Завантажити`,fingerprint:`SHA-256`},howItWorks:{title:`Як це працює`,step1:`У тій самій локальній мережі віртуальні принтери автоматично з’являються в слайсері (Bambu Studio або OrcaSlicer). З інших мереж додайте їх вручну за IP-адресою та кодом доступу.`,step2:`У режимах архівування, перевірки та черги натисніть «Надіслати» у слайсері, щоб вивантажити файли 3MF до Bambuddy. Слайсер покаже повідомлення про успішний друк, але файл буде лише збережено, а не надруковано.`,step3:`У режимі проксі-сервера віртуальний принтер передає весь трафік на справжній принтер — друк починається негайно, ніби підключений безпосередньо.`},status:{title:`Деталі статусу`,printerName:`Назва принтера`,model:`Модель`,serialNumber:`Серійний номер`,mode:`Режим`,pendingFiles:`Файли, що очікують на розгляд`,targetPrinter:`Цільовий принтер`,ftpPort:`Порт FTP`,mqttPort:`Порт MQTT`,ftpConnections:`Підключення FTP`,mqttConnections:`Підключення MQTT`},toast:{updated:`Налаштування віртуального принтера оновлено`,failedToUpdate:`Не вдалося оновити налаштування`,copyFailed:`Не вдалося скопіювати — спробуйте вибрати текст вручну`,accessCodeRequired:`Спочатку встановіть код доступу`,targetPrinterRequired:`Спочатку виберіть цільовий принтер`,bindIpRequired:`Спочатку встановіть прив’язку IP.`,accessCodeEmpty:`Код доступу не може бути порожнім`,accessCodeLength:`Код доступу має містити рівно 8 символів`,targetCodeChangedRebind:`Код доступу тепер відповідає новому цільовому принтеру. Повторно додайте цей пристрій у свій слайсер, щоб отримати новий код.`,created:`Створено віртуальний принтер`,failedToCreate:`Не вдалося створити віртуальний принтер`,deleted:`Віртуальний принтер видалено`,failedToDelete:`Не вдалося видалити віртуальний принтер`},list:{title:`Віртуальні принтери`,add:`додати`,addFirst:`Додати віртуальний принтер`,empty:`Віртуальні принтери не налаштовані. Додайте один, щоб почати.`},bindIp:{title:`Інтерфейс прив’язки`,placeholder:`Виберіть інтерфейс...`,hint:`Мережевий інтерфейс, до якого прив’язуватиметься цей віртуальний принтер. Для кожного принтера він має бути унікальним.`},proxy:{accessCodeHint:`У режимі проксі використовуйте код доступу цільового принтера в слайсері. З’єднання прозоро пересилається на справжній принтер.`},addDialog:{title:`Додати віртуальний принтер`,name:`Назва`,hint:`Ви можете налаштувати код доступу, цільовий принтер та інші параметри після створення.`,create:`Створити`},deleteConfirm:{title:`Видалити віртуальний принтер`,message:`Ви впевнені, що хочете видалити «{{name}}»? Усі служби цього принтера буде зупинено.`}},modelViewer:{openInSlicer:`Відкрити у слайсері`,openInSlicerWith:`Відкрити у {{slicer}}`,moreSlicerOptions:`Більше варіантів слайсера`,openInSlicerFailed:`Не вдалося відкрити у слайсері`,tabs:{model:`3D-модель`},notAvailable:`недоступно`,plates:`Пластини`,allPlates:`Усі пластини`,plateNumber:`Пластина {{number}}`,plateCount:`Пластин: {{count}}`,plateCount_other:`Пластин: {{count}}`,objectCount:`Об’єктів: {{count}}`,objectCount_other:`Об’єктів: {{count}}`,filamentCount:`Філаментів: {{count}}`,filamentCount_other:`Філаментів: {{count}}`,eta:`ETA {{minutes}} хв`,noPreview:`Попередній перегляд цього файлу недоступний`,pagination:{pageOf:`Сторінка {{current}} з {{total}}`,prev:`Назад`,next:`Далі`},errors:{failedToLoad:`Не вдалося завантажити файл`,noMeshes:`У файлі 3MF не знайдено жодної сітки`,unsupportedFormat:`Непідтримуваний формат файлу`}},maintenanceDescriptions:{lubricateCarbonRods:`Нанесіть мастило на карбонові стрижні для плавного руху`,lubricateRails:`Нанесіть мастило на лінійні рейки для плавного руху`,cleanNozzle:`Очистіть нагрівач і сопло, щоб запобігти засміченню`,checkBelts:`Перевірте натяг ременя для точного друку`,cleanBuildPlate:`Очистіть будівельну пластину для кращого зчеплення`,checkExtruder:`Перевірте шестерні екструдера на знос`,checkCooling:`Переконайтеся, що вентилятори охолодження працюють належним чином`,generalInspection:`Загальний огляд принтера`,cleanCarbonRods:`Очистіть карбонові стрижні, щоб зменшити тертя`,lubricateSteelRods:`Нанесіть мастило на сталеві стрижні для плавного руху`,cleanSteelRods:`Очистіть сталеві стрижні, щоб зменшити тертя`,cleanLinearRails:`Протріть лінійні рейки, щоб видалити пил і сміття`,checkPtfeTube:`Перевірте трубку PTFE на знос або пошкодження`,replaceHepaFilter:`Замініть фільтр HEPA для забезпечення якості повітря`,replaceCarbonFilter:`Замініть фільтр з активованим вугіллям`,lubricateLeftNozzleRail:`Змастіть ліву рейку сопла (серія H2)`},haSensors:{label:`Датчики`,unavailable:`Недоступно`,blocksPrints:`{{entity}} — утримує друк, поки триває сповіщення`,states:{open:`Відчинено`,closed:`Зачинено`,unlocked:`Розблоковано`,locked:`Заблоковано`,detected:`Виявлено`,clear:`Чисто`,wet:`Волого`,dry:`Сухо`,problem:`Проблема`,ok:`Норма`,running:`Працює`,stopped:`Зупинено`,on:`Увімк`,off:`Вимк`},sectionTitle:`Датчики Home Assistant (принтери)`,add:`Додати датчик`,addTitle:`Додати датчик Home Assistant`,editTitle:`Редагувати датчик Home Assistant`,empty:`Датчиків ще немає. Прив'яжіть дверний контакт або термометр із Home Assistant, щоб показати його на картці принтера.`,unknownPrinter:`Невідомий принтер`,badgeBlocks:`Утримує друк`,badgeNotifies:`Сповіщає`,badgeHidden:`Приховано на картці`,printer:`Принтер`,entity:`Сутність`,searchPlaceholder:`Пошук сутностей...`,noEntities:`Немає відповідних сутностей`,name:`Відображувана назва`,alertWhen:`Сповіщати коли`,alertNever:`Ніколи — лише показувати`,alertAbove:`Вище`,alertBelow:`Нижче`,alertHint:`Стан сповіщення підсвічує датчик на картці принтера та вмикає параметри нижче.`,showOnCard:`Показувати на картці принтера`,notifyOnAlert:`Надсилати сповіщення, коли спрацьовує`,blockPrint:`Утримувати друк у черзі, поки триває сповіщення`,blockPrintHint:`Завдання лишаються в черзі й запускаються самі, коли датчик повертається до норми. Ігнорується, поки Home Assistant недоступний.`,toast:{created:`Датчик додано`,updated:`Датчик збережено`,deleted:`Датчик видалено`},error:{pickEntity:`Оберіть сутність Home Assistant`,nameRequired:`Введіть відображувану назву`,printerRequired:`Оберіть принтер`,alertRequired:`Спершу задайте умову сповіщення`}},locationHaSensors:{sectionTitle:`Датчики Home Assistant (місця зберігання)`,sectionDescription:`Прив'яжіть датчики температури, вологості або заряду батареї Home Assistant до місць зберігання, щоб показувати актуальні значення на картці філаменту і в таблиці. Для кожного місця зберігання дозволено лише один датчик на категорію.`,add:`Додати датчик`,addTitle:`Додати датчик Home Assistant`,editTitle:`Редагувати датчик Home Assistant`,empty:`Датчиків ще немає. Прив'яжіть датчик температури або вологості з Home Assistant, щоб показати його на картці філаменту.`,unknownLocation:`Невідоме місце`,location:`Місце зберігання`,showOnCard:`Показувати на картці філаменту`,overwriteConfirm:{title:`Замінити наявний датчик?`,messageTemperature:`«{{location}}» вже має прив'язаний датчик температури: {{name}}. Продовження замінить його.`,messageHumidity:`«{{location}}» вже має прив'язаний датчик вологості: {{name}}. Продовження замінить його.`,messageBattery:`«{{location}}» вже має прив'язаний датчик заряду батареї: {{name}}. Продовження замінить його.`},autoAdd:{confirmTitle:`Додати також інші датчики?`,confirmMessage:`Bambuddy також знайшов інші датчики для цього місця. Виберіть, які додати.`,added:`Також додано: {{names}}`,noneFound:`Відповідних датчиків температури, вологості чи заряду батареї для цього місця не знайдено.`,onlyThisOne:`Лише цей`},options:{buttonLabel:`Параметри датчиків`,title:`Параметри датчиків місця зберігання`,description:`Ці значення використовуються, коли датчик температури, вологості чи заряду батареї автоматично прив'язується разом із першим датчиком місця зберігання.`,generalSettings:`Загальні налаштування`,pollInterval:`Інтервал оновлення (секунди)`,pollIntervalHint:`Як часто Bambuddy опитує Home Assistant і оновлює значення датчиків на екрані. Мінімум 60 секунд.`,colorizeValues:`Розфарбовувати значення датчиків відповідно до порогів тривоги`,aboveColor:`Колір перевищення порогу`,belowColor:`Колір нижче порогу`,optimalColor:`Колір оптимального значення`,colors:{red:`Червоний`,orange:`Помаранчевий`,yellow:`Жовтий`,green:`Зелений`,blue:`Синій`,purple:`Фіолетовий`,pink:`Рожевий`},saved:`Параметри збережено`,saveFailed:`Не вдалося зберегти параметри`,reset:`Скинути`,resetConfirm:{title:`Скинути всі наявні датчики місць зберігання?`,message:`Це замінить пороги тривоги, сповіщення та видимість на картці для всіх наявних датчиків температури, вологості та заряду батареї місць зберігання значеннями, вказаними вище, а також відновить ім'я кожного датчика до його зрозумілої назви в Home Assistant — датчики принтерів не зачіпаються. Цю дію не можна скасувати. Залежно від кількості датчиків це може зайняти деякий час.`},resetDone:`Застосовано до {{count}} датчиків місць зберігання`,resetFailed:`Не вдалося скинути датчики місць зберігання`},deleteAllConfirm:{title:`Видалити всі датчики?`,message:`Це видалить усі {{count}} датчиків, прив'язаних до «{{location}}». Цю дію не можна скасувати.`},currentlyBound:`Наразі прив'язано: {{entity}}`,error:{locationRequired:`Оберіть місце зберігання`},toast:{created:`Датчик додано`,updated:`Датчик збережено`,deleted:`Датчик видалено`}},smartPlugs:{offline:`Не в мережі`,admin:`Адміністрування`,openPlugAdminPage:`Відкрити сторінку адміністратора розетки`,deleteSmartPlug:`Видалити розумну розетку`,turnOnSmartPlug:`Увімкнути розумну розетку`,turnOffSmartPlug:`Вимкнути розумну розетку`,turnOn:`Увімкнути`,turnOff:`Вимкнути`,addSmartPlug:{scanningNetwork:`Сканування мережі...`,chooseEntity:`Виберіть сутність…`,connectionFailed:`Помилка підключення`,searchEntities:`Пошук сутностей...`,searchPowerSensors:`Пошук датчиків потужності...`,searchEnergySensors:`Пошук датчиків енергії...`,placeholders:{plugName:`Розетка у вітальні`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Та сама тема, що й для потужності, або інша`}},linkedTo:`Пов’язано з:`,monitorOnly:`Лише моніторинг`,alerts:`Оповіщення`,scheduleOn:`Увімкнення: {{time}}`,scheduleOff:`Вимкнення: {{time}}`,on:`Увімкнено`,off:`Вимкнено`,power:`Потужність`,kwhToday:`кВт·год сьогодні`,settings:`Налаштування`,automationSettings:`Налаштування автоматизації`,showInSwitchbar:`Показати на панелі перемикачів`,quickAccessSidebar:`Швидкий доступ із бічної панелі`,enabled:`Увімкнено`,enableAutomation:`Увімкнути автоматизацію для цієї розетки`,autoOn:`Автоматичне ввімкнення`,autoOnDescription:`Увімкнути на початку друку`,autoOff:`Автоматичне вимкнення`,autoOffDescription:`Вимкнути після завершення друку (одноразово)`,autoOffPersistent:`Залишити ввімкненим`,autoOffPersistentDescription:`Залишати ввімкненою між друками, а не лише після одного завдання`,controlsPrinterPower:`Живить принтер`,controlsPrinterPowerDescription:`Вимкніть цей параметр, якщо розетка живить лише аксесуар — наприклад, вентилятор фільтра або освітлення. Інакше вимкнення розетки позначатиме принтер як недоступний.`,autoOffAfterDrying:`Автоматичне вимкнення після сушіння`,autoOffAfterDryingDescription:`Вимкнути після завершення сушіння AMS`,delayAfterDryingMinutes:`Затримка після сушіння (хв)`,turnOffDelayMode:`Режим затримки вимкнення`,time:`Час`,temp:`Температура`,delayMinutes:`Затримка (хвилин)`,tempThreshold:`Температурний поріг (°C)`,tempThresholdDescription:`Вимикається, коли сопло охолоне нижче цієї температури`,edit:`Редагувати`,deleteConfirm:`Ви впевнені, що хочете видалити "{{name}}"? Це неможливо скасувати.`,turnOnConfirm:`Ви впевнені, що бажаєте ввімкнути "{{name}}"?`,turnOffConfirm:`Ви впевнені, що бажаєте вимкнути "{{name}}"? Це призведе до відключення живлення підключеного пристрою.`,failedToTurn:`Не вдалося змінити стан «{{name}}» ({{action}})`,unknown:`Невідомий`,addTitle:`Додати розумну розетку`,editTitle:`Редагувати розумну розетку`,stopScanning:`Зупинити сканування`,discoverTasmota:`Виявити пристрої Tasmota`,foundDevices:`Знайдено {{count}} пристроїв - натисніть, щоб вибрати:`,noDevicesFound:`У вашій мережі не знайдено пристроїв Tasmota.`,haNotConfigured:`Home Assistant не налаштовано. Налаштуйте його в`,haSettingsPath:`Налаштування → Мережа → Home Assistant`,selectEntity:`Вибрати сутність *`,ipAddress:`IP Адреса *`,nameLabel:`Назва *`,username:`Ім’я користувача`,password:`Пароль`,authHint:`Залиште поле пустим, якщо ваш пристрій Tasmota не вимагає автентифікації`,linkToPrinter:`Прив’язати до принтера`,noPrinter:`Без принтера (лише ручне керування)`,linkingDescription:`Прив’язування дає змогу автоматично вмикати й вимикати розетку на початку та після завершення друку`,powerAlerts:`Сповіщення про живлення`,alertAbove:`Сповіщати, якщо вище (Вт)`,alertBelow:`Сповіщати, якщо нижче (Вт)`,alertDescription:`Сповіщати, коли споживана потужність перетинає ці пороги. Залиште відповідне поле порожнім, щоб вимкнути сповіщення для цього напрямку.`,dailySchedule:`Щоденний розклад`,turnOnAt:`Увімкнути о`,turnOffAt:`Вимкнути о`,scheduleDescription:`Щодня автоматично вмикати й вимикати розетку в зазначений час. Залиште поле порожнім, щоб пропустити відповідну дію.`,showOnPrinterCard:`Показати на картці принтера`,displayOnPrinterCard:`Показувати кнопку на картці принтера`,connectedResult:`Підключено!`,deviceLabel:`Пристрій: {{name}} - `,stateLabel:`Стан: {{state}}`,test:`Тест`,delete:`Видалити`,save:`Зберегти`,add:`Додати`,cancel:`Скасувати`,failedToStartScan:`Не вдалося почати сканування`,nameRequired:`Необхідно вказати ім’я`,entityRequired:`Сутність необхідна для розеток Home Assistant.`,mqttTopicRequired:`Для моніторингу потужності, енергії або стану потрібно налаштувати принаймні одну тему MQTT`,loadingEntities:`Завантаження об’єктів...`,loading:`Завантаження...`,failedToLoadEntities:`Не вдалося завантажити сутності: {{error}}`,noEntitiesMatching:`Не знайдено об’єктів, що відповідають "{{search}}"`,noEntitiesAvailable:`Немає доступних сутностей`,searchingEntities:`Пошук у всіх об’єктах ({{count}} знайдено)`,showingEntities:`Показано сутності switch, light та input_boolean (доступно: {{count}})`,energyMonitoringOptional:`Моніторинг енергії (необов’язково)`,energyMonitoringHint:`Знайдіть і виберіть датчики, що надають дані про потужність або споживання енергії.`,powerSensorW:`Датчик потужності (Вт)`,energyTodayKwh:`Споживання за сьогодні (кВт·год)`,totalEnergyKwh:`Загальне споживання енергії (кВт·год)`,noMatchingSensors:`Немає відповідних датчиків`,none:`Жодного`,mqttNotConfigured:`MQTT-брокер не налаштований. Укажіть адресу брокера в розділі`,mqttSettingsPath:`Налаштування → Мережа → Публікація MQTT`,mqttNotConfiguredSuffix:`(вмикати публікацію не потрібно — достатньо вказати параметри брокера).`,mqttMonitorOnlyDescription:`MQTT-розетки отримують дані про потужність і споживання енергії через підписку MQTT. Керування ввімкненням і вимкненням недоступне — використовуйте MQTT-брокер або систему домашньої автоматизації.`,powerMonitoring:`Моніторинг потужності`,energyMonitoring:`Моніторинг споживання енергії`,stateMonitoring:`Моніторинг стану`,optional:`необов’язково`,topic:`Тема`,jsonPath:`Шлях JSON`,multiplier:`Множник`,onValue:`Значення «увімкнено»`,mqttPowerHint:`Шлях JSON витягує значення з корисного навантаження JSON (наприклад, "power_l1"). Залиште поле порожнім, якщо тема публікує безпосередньо числові значення.
 Для перетворення mW→W використовуйте множник 0.001, а для kW→W — 1000.`,mqttEnergyHint:`Шлях JSON витягує значення з корисного навантаження JSON. Залиште поле порожнім для безпосередньо переданих значень.
 Для перетворення Wh→kWh використовуйте множник 0.001, а для MWh→kWh — 1000.`,mqttStateHint:`Шлях JSON витягує значення з корисного навантаження JSON. Залиште поле порожнім для безпосередньо переданих значень.
 Значення «увімкнено»: точний рядок, що означає стан «увімкнено». Залиште поле порожнім для автоматичного визначення (ON, true, 1).`,restControl:`Керування`,restOnUrl:`Увімкнути URL`,restOffUrl:`Вимкнути URL`,restOnBody:`Тіло запиту ввімкнення`,restOffBody:`Тіло запиту вимкнення`,restMethod:`Метод HTTP`,restHeaders:`Спеціальні заголовки (JSON)`,restStatusUrl:`URL стану`,restStatusPath:`Шлях JSON до стану`,restStatusOnValue:`Значення «увімкнено»`,restPowerUrl:`URL даних про потужність`,restPowerPath:`Шлях JSON до потужності`,restPowerMultiplier:`Множник потужності`,restEnergyUrl:`URL даних про енергію`,restEnergyPath:`Шлях JSON до споживання за сьогодні`,restEnergyTotalPath:`Шлях JSON до загального споживання`,restEnergyTotalMultiplier:`Множник загального споживання`,restEnergyTotalPathHint:`наприклад, aenergy.total`,restEnergyTotalHint:`Багато розеток, зокрема всі моделі Shelly, повідомляють лише загальний лічильник споживання, який ніколи не скидається. Його слід указувати саме тут, а не в полі вище: якщо трактувати це значення як споживання за сьогодні, воно не скинеться опівночі, а показники «Учора» та «Усього» залишатимуться порожніми. Bambuddy сам обчислює показники за сьогодні й учора на основі цього лічильника; для їх появи потрібні один-два дні даних. Shelly передає значення у ват-годинах, тому використовуйте множник 0.001.`,restEnergyMultiplier:`Множник енергії`,restUrlRequired:`Для REST-розетки потрібно вказати принаймні один URL — для ввімкнення або вимкнення.`,restHeadersHint:`наприклад, {"Authorization": "Bearer your-token"}`,restBodyHint:`напр. ON, {"state": "on"}`,restStatusHint:`URL для опитування поточного стану`,restPathHint:`наприклад, state або data.power.status`,restPowerUrlHint:`Окремий URL для даних про потужність; якщо поле порожнє, використовується URL стану`,restEnergyUrlHint:`Окремий URL для даних про енергію; якщо поле порожнє, використовується URL стану`,restEnergyHint:`Для кожного значення можна використовувати окремий URL або URL стану як резервний. Для перетворення одиниць використовуйте множники, наприклад 0.001 для перетворення Wh у kWh.`,testConnection:`Тестове підключення`,connectionSuccess:`Підключення успішне`,noSwitchesInSwitchbar:`На панелі перемикачів немає розеток`,enableSwitchbarHint:`Увімкніть «Показувати на панелі перемикачів» у розділі «Налаштування → Розумні розетки».`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`Електронна пошта`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`,bark:`Bark`},providerDescriptions:{email:`Сповіщення електронною поштою SMTP`,telegram:`Сповіщення через бота Telegram.`,discord:`Надіслати на канал Discord через webhook`,ntfy:`Безкоштовні push-сповіщення з можливістю самостійного розгортання`,pushover:`Прості та надійні push-повідомлення`,callmebot:`Безкоштовні сповіщення WhatsApp через CallMeBot`,webhook:`Універсальний HTTP POST-запит на будь-який URL`,homeassistant:`Постійні сповіщення на інформаційній панелі Home Assistant.`,bark:`Push-сповіщення iOS через Bark із можливістю самостійного розгортання`},lastSuccess:`Останнє успішне надсилання: {{date}}`,error:`Помилка`,printer:`Принтер:`,allPrinters:`Всі принтери`,sendTestNotification:`Надіслати тестове сповіщення`,eventSettings:`Налаштування події`,enabled:`Увімкнено`,sendFromProvider:`Надсилати сповіщення від цього постачальника`,printEvents:`Події друку`,printerStatus:`Стан принтера`,amsAlarms:`Попередження AMS`,amsHtAlarms:`Попередження AMS-HT`,printQueue:`Черга друку`,start:`Початок`,plateCheck:`Перевірка пластини`,complete:`Завершено`,failed:`Помилка`,stopped:`Зупинено`,progress:`Прогрес`,offline:`Не в мережі`,lowFilament:`Закінчується філамент`,maintenance:`Технічне обслуговування`,amsHumidity:`AMS Вологість`,amsTemp:`AMS Темп`,amsDryingSuspended:`Сушіння призупинено`,amsHtHumidity:`AMS-HT Вологість`,amsHtTemp:`Температура AMS-HT`,bedCooled:`Стіл охолов`,firstLayer:`Перший шар`,quiet:`Тихо`,digest:`Дайджест {{time}}`,printStarted:`Друк розпочато`,plateNotEmpty:`Друкарська пластина не порожня`,plateNotEmptyDescription:`Перед друком виявлено об’єкти`,plateClearRequired:`Потрібно очистити пластину`,plateClearRequiredDescription:`Друк завершено, черга очікує підтвердження очищення пластини`,plateClear:`Очищення пластини`,printCompleted:`Друк завершено`,bedCooledLabel:`Стіл охолов`,bedCooledDescription:`Після друку стіл охолов нижче заданого порога`,firstLayerCompleteLabel:`Перший шар завершено`,firstLayerCompleteDescription:`Сповістити зі знімком після завершення першого шару`,missingSpoolAssignmentLabel:`Відсутнє призначення котушки`,billingChargeFailedLabel:`Помилка списання`,billingChargeFailedDescription:`Сповіщати, якщо не вдалося облікувати вартість друку`,missingSpoolAssignmentDescription:`Сповіщати, коли починається друк і для необхідних лотків не призначено котушку`,printFailed:`Помилка друку`,printStopped:`Друк зупинено`,progressMilestones:`Віхи прогресу`,progressMilestonesDescription:`Сповіщати на 25%, 50%, 75%`,printerOffline:`Принтер не в мережі`,printerError:`Помилка принтера`,aiFailureDetection:`Виявлення помилок за допомогою ШІ`,aiFailureDetectionDescription:`Сповіщати, коли ШІ Obico виявляє можливу помилку друку`,lowFilamentLabel:`Закінчується філамент`,maintenanceDue:`Настав час технічного обслуговування`,maintenanceDueDescription:`Повідомити, коли потрібне обслуговування`,amsHumidityHigh:`AMS Висока вологість`,amsHumidityHighDescription:`Звичайна AMS вологість перевищує порогове значення`,amsTemperatureHigh:`AMS Висока температура`,amsTemperatureHighDescription:`Звичайна AMS температура перевищує порогове значення`,amsDryingSuspendedTitle:`Автоматичне сушіння призупинено`,amsDryingSuspendedDescription:`Автоматичне сушіння блока AMS припинено: вологість так і не опустилася нижче порога`,amsHtHumidityHigh:`AMS-HT Висока вологість`,amsHtHumidityHighDescription:`AMS-HT вологість перевищує порогове значення`,amsHtTemperatureHigh:`Висока температура AMS-HT`,amsHtTemperatureHighDescription:`Температура AMS-HT перевищує порогове значення`,inventoryAlerts:`Сповіщення про запаси`,stockReorderAlert:`Сповіщення про необхідність поповнення`,stockReorderAlertDescription:`Запас SKU досяг точки повторного замовлення`,stockBreakAlert:`Сповіщення про ризик вичерпання запасу`,stockBreakAlertDescription:`Запас закінчиться до того, як надійде поповнення`,jobAdded:`Завдання додано`,jobAddedDescription:`Завдання додано до черги`,jobAssigned:`Завдання призначено`,jobAssignedDescription:`Завдання на основі моделі, призначене принтеру`,jobStarted:`Завдання розпочато`,jobStartedDescription:`Розпочато друк завдання черги`,jobWaiting:`Завдання очікує`,jobWaitingDescription:`Завдання очікує на філамент або принтер`,jobSkipped:`Завдання пропущено`,jobSkippedDescription:`Завдання пропущено (попереднє не вдалося)`,jobFailed:`Помилка завдання`,jobFailedDescription:`Не вдалося розпочати завдання`,queueComplete:`Черга завершена`,queueCompleteDescription:`Усі завдання черги завершено`,quietHours:`Тихі години`,noNotificationsDuring:`Жодних сповіщень у ці години`,editProviderToChangeQuietHours:`Змініть постачальника, щоб змінити години тиші`,dailyDigest:`Щоденний дайджест`,batchNotifications:`Групуйте сповіщення в єдиний щоденний підсумок`,sendAt:`Надсилати о {{time}}`,editProviderToChangeDigestTime:`Відредагуйте постачальника, щоб змінити час дайджесту`,edit:`Редагувати`,deleteProvider:`Видалити постачальника сповіщень`,deleteConfirm:`Видалити «{{name}}»? Цю дію неможливо скасувати.`,delete:`Видалити`,addTitle:`Додати постачальника сповіщень`,editTitle:`Редагувати постачальника сповіщень`,nameLabel:`Назва *`,namePlaceholder:`Мої сповіщення`,providerTypeLabel:`Тип постачальника *`,configuration:`Конфігурація`,testConfiguration:`Перевірити конфігурацію`,printerFilter:`Фільтр принтера`,onlyFromPrinter:`Надсилати лише сповіщення про події з цього принтера`,quietHoursDnd:`Тихі години (не турбувати)`,quietStart:`Початок`,quietEnd:`Кінець`,dailyDigestLabel:`Щоденний дайджест`,sendDigestAt:`Надсилати дайджест о`,digestCollected:`Події буде зібрано й надіслано в цей час одним зведенням`,notificationEvents:`Події сповіщень`,progressPercent:`(25%, 50%, 75%)`,bedCooledAfterPrint:`(після завершення друку)`,haSensorAlert:`Сповіщення датчика принтера`,haSensorAlertDescription:`(пов'язаний датчик Home Assistant потребує уваги)`,locationHaSensorAlert:`Сповіщення датчика місця зберігання`,locationHaSensorAlertDescription:`(датчик Home Assistant, пов'язаний з місцем зберігання, потребує уваги)`,eventPriority:{sectionTitle:`Пріоритет ntfy`,helpNtfy:`Виберіть пріоритет для кожної ввімкненої події. ntfy використовує їх для ескалації сповіщень (звук, видимість, поведінка push). Для рівнів, які тут не встановлено, використовується сервер ntfy за замовчуванням.`,min:`Мін`,low:`Низький`,default:`За замовчуванням`,high:`Високий`,urgent:`Терміново`},cancel:`Скасувати`,save:`зберегти`,add:`додати`,nameRequired:`Необхідно вказати ім’я`,fieldRequired:`{{field}} — обов’язкове поле.`,haDataInvalid:`Поле «Дані» має містити дійсний об’єкт JSON, наприклад {"priority": "high", "ttl": 0}`,phoneNumber:`Номер телефону`,apiKey:`Ключ API`,serverUrl:`Сервер URL`,topic:`Тема`,authToken:`Токен авторизації`,userKey:`Ключ користувача`,appToken:`Токен застосунку`,priority:`Пріоритет`,pushoverRetry:`Інтервал повторення екстреного сповіщення (с)`,pushoverExpire:`Термін дії екстреного сповіщення (с)`,botToken:`Токен бота`,chatId:`Ідентифікатор чату`,telegramThreadId:`ID теми форуму`,telegramThreadIdHelp:`Необов'язково. Надсилає в конкретну тему форум-групи — останнє число у посиланні на тему (t.me/c/.../25). Залиште порожнім для теми General.`,telegramThreadIdInvalid:`ID теми форуму має бути числом.`,smtpServer:`Сервер SMTP`,smtpPort:`Порт SMTP`,security:`Безпека`,authentication:`Автентифікація`,username:`Ім’я користувача`,password:`Пароль`,fromEmail:`Адреса відправника`,toEmail:`Адреса одержувача`,webhookUrl:`Webhook URL`,payloadFormat:`Формат корисного навантаження`,authorization:`Авторизація`,titleFieldName:`Назва поля заголовка`,messageFieldName:`Назва поля повідомлення`,editTemplate:`Редагувати шаблон: {{name}}`,titleLabel:`Заголовок`,bodyLabel:`Текст`,titlePlaceholder:`Назва сповіщення...`,bodyPlaceholder:`Текст сповіщення...`,availableVariables:`Доступні змінні`,clickToInsert:`Натисніть, щоб вставити в текст у позиції курсора`,livePreview:`Попередній перегляд`,hide:`Сховати`,show:`Показати`,loadingPreview:`Завантаження попереднього перегляду...`,enterTemplateContent:`Введіть вміст шаблону, щоб побачити попередній перегляд`,titlePreview:`Назва:`,bodyPreview:`Текст:`,resetToDefault:`Відновити типові значення`,titleRequired:`Необхідно вказати назву`,bodyRequired:`Текст є обов’язковим`,notificationLog:`Журнал повідомлень`,showFailedOnly:`Лише невдалі`,last24Hours:`Останні 24 години`,last7Days:`Останні 7 днів`,last30Days:`Останні 30 днів`,last90Days:`Останні 90 днів`,justNow:`Щойно`,noFailedNotifications:`Немає невдалих сповіщень`,noNotificationsLogged:`Сповіщення не зареєстровано`,unknownProvider:`Невідомий постачальник`,logTitle:`Назва`,logMessage:`повідомлення`,logError:`Помилка`,logProvider:`Постачальник: {{type}}`,logTime:`Час: {{time}}`,refresh:`Оновити`,clearOld:`Очистити старі`,statsSummary:`За останні {{days}} дн.:`,statsNotifications:`сповіщення`,statsSent:`{{count}} надіслано`,statsFailed:`не вдалося надіслати: {{count}}`,eventTypes:{print_start:`Друк розпочато`,print_complete:`Друк завершено`,print_failed:`Помилка друку`,print_stopped:`Друк зупинено`,print_progress:`Прогрес`,printer_offline:`Принтер не в мережі`,printer_error:`Помилка принтера`,filament_low:`Закінчується філамент`,maintenance_due:`Технічне обслуговування`,test:`Тест`},userEmail:{title:`Сповіщення`,emailNotifications:`Сповіщення електронною поштою`,emailNotificationsDesc:`Отримуйте сповіщення електронною поштою про власні завдання друку. Електронні листи надсилаються за допомогою системних параметрів SMTP, налаштованих у розширеній автентифікації.`,sendingTo:`Сповіщення будуть надіслані на адресу`,noEmailWarning:`У вашому обліковому записі немає адреси електронної пошти. Зверніться до адміністратора, щоб її додати.`,printJobNotifications:`Повідомлення про завдання друку`,printJobNotificationsDesc:`Виберіть, які події викликають сповіщення електронною поштою про завдання друку, які ви надсилаєте.`,printJobStarts:`Початок завдання друку`,printJobStartsDesc:`Отримуйте сповіщення, коли розпочнеться ваше завдання друку.`,printJobFinishes:`Завершення завдання друку`,printJobFinishesDesc:`Отримуйте сповіщення, коли ваше завдання друку буде успішно завершено.`,printErrors:`Помилки друку`,printErrorsDesc:`Отримуйте сповіщення, якщо завдання друку завершується невдало або під час нього виникає помилка.`,printJobStops:`Зупинення завдання друку`,printJobStopsDesc:`Отримуйте сповіщення, коли ваше завдання друку скасовано або зупинено.`,saveSuccess:`Параметри сповіщень збережено.`,saveError:`Не вдалося зберегти налаштування сповіщень.`}},richTextEditor:{bold:`жирний`,italic:`Курсив`,underline:`Підкреслити`,bulletList:`Список маркерів`,numberedList:`Нумерований список`,alignLeft:`Вирівняти по лівому краю`,alignCenter:`Вирівняти по центру`,alignRight:`Вирівняти праворуч`,addLink:`Додати посилання`,removeLink:`Видалити посилання`},externalLinks:{title:`Посилання на бічній панелі`,sidebarLayout:`Бічна панель`,sidebarLayoutDescription:`Показуйте або приховуйте вбудовані сторінки, додавайте зовнішні посилання та перетягуйте елементи, щоб змінити порядок навігації на бічній панелі.`,systemPages:`Bambuddy сторінок`,externalLinks:`Зовнішні посилання`,visibleInSidebar:`Видно на бічній панелі`,hiddenFromSidebar:`Приховано від бічної панелі`,requiredInSidebar:`Обов’язково на бічній панелі`,hidePage:`Приховати сторінку`,showPage:`Показати сторінку`,settingsCannotBeHidden:`Налаштування не можна приховати`,noLinksConfigured:`Зовнішні посилання не налаштовано`,deleteLink:`Видалити посилання`,removeCustomIcon:`Видалити спеціальний значок`,openInNewTab:`Відкрити в новій вкладці`,placeholders:{linkName:`Моє посилання`}},keyboardShortcuts:{title:`Комбінації клавіш`,navigation:`Навігація`,archivesSection:`Архіви`,kProfilesSection:`K-профілі`,generalSection:`Загальний`,shortcuts:{goToPrinters:`Перейдіть до Принтери`,goToArchives:`Перейдіть до архіву`,goToQueue:`Перейдіть до черги`,goToStats:`Перейти до статистики`,goToProfiles:`Перейдіть до Cloud Profiles`,goToSettings:`Перейдіть до Налаштувань`,focusSearch:`Пошук по фокусу`,openUploadModal:`Відкрити вікно вивантаження`,clearSelection:`Очистити виділення / розмити введення`,contextMenu:`Контекстне меню на картках`,refreshProfiles:`Оновити профілі`,newProfile:`Новий профіль`,exitSelectionMode:`Вийти з режиму вибору`,showHelp:`Покажіть цю довідку`},footer:`Натисніть Esc або клацніть зовні, щоб закрити`},notificationLog:{title:`Журнал повідомлень`,events:{printStarted:`Друк розпочато`,printComplete:`Друк завершено`,printFailed:`Помилка друку`,printStopped:`Друк зупинено`,progress:`Прогрес`,printerOffline:`Принтер не в мережі`,printerError:`Помилка принтера`,lowFilament:`Закінчується філамент`,maintenanceDue:`Технічне обслуговування`,test:`Тест`},timeAgo:{justNow:`Просто зараз`,minutesAgo:`{{minutes}}хв тому`,hoursAgo:`{{hours}} год тому`}},restoreBackup:{title:`Відновити резервну копію`,restoring:`Відновлення...`,restoreComplete:`Відновлення завершено`,restoreFailed:`Не вдалося відновити`,importSettings:`Імпорт налаштувань із файлу резервної копії`,pleaseWait:`Зачекайте, поки ваші дані відновляться`,clickToSelect:`Натисніть, щоб вибрати файл резервної копії (.json або .zip)`,howDuplicateHandling:`Як працює обробка дублікатів:`,categories:{printers:`Принтери`,smartPlugs:`Розумні розетки`,notificationProviders:`Постачальники сповіщень`,filaments:`філаменти`,archives:`Архіви`,pendingUploads:`Вивантаження, що очікують`,settingsTemplates:`Налаштування та шаблони`},matchingInfo:{printers:`відповідає серійному номеру`,smartPlugs:`збігається з адресою IP.`,notificationProviders:`відповідність за назвою`,filaments:`відповідність за назвою + типом + брендом`,archives:`відповідає хешу вмісту`,pendingUploads:`відповідає імені файлу`,settingsTemplates:`завжди перезаписується`},replaceExisting:`Замінити існуючі дані`,keepExisting:`Зберегти наявні дані`,replaceDescription:`Замінити елементи, які вже існують, резервними копіями`,keepDescription:`Відновлюйте лише елементи, яких ще не існує`,caution:`Увага:`,cautionText:`Під час перезапису поточні конфігурації буде замінено даними з резервної копії. З міркувань безпеки коди доступу до принтерів ніколи не перезаписуються.`,itemsRestored:`Елементів відновлено`,itemsSkipped:`Елементи пропущені`,restored:`Відновлено`,skipped:`Пропущено (вже існує)`,filesLabel:`Файли (3MF, мініатюри тощо)`,newApiKeysGenerated:`Створено нові API ключі`,newApiKeysWarning:`Ці ключі буде показано лише один раз. Скопіюйте їх зараз!`,processingBackup:`Обробка файлу резервної копії...`,noDataFound:`У файлі резервної копії не знайдено даних для відновлення.`,failedToRestore:`Не вдалося відновити резервну копію. Будь ласка, перевірте формат файлу.`},backupExport:{title:`Експорт резервної копії`,selectData:`Вибрати дані для включення`,selectAll:`Вибрати усі`,selectNone:`Вибрати Немає`,categoryDescriptions:{settings:`Мова, тема, параметри оновлення`,notifications:`ntfy, Pushover, Discord тощо.`,templates:`Користувацькі шаблони повідомлень`,smartPlugs:`Конфігурації розетки Tasmota.`,externalLinks:`Посилання на бічній панелі на зовнішні служби`,printers:`Інформація про принтер (без кодів доступу)`,plateDetection:`Еталонні зображення порожньої пластини`,filaments:`Види та вартість філаменти`,maintenance:`Спеціальні графіки технічного обслуговування`,archives:`Усі дані для друку + файли (3MF, мініатюри, фотографії)`,projects:`Проєкти, елементи специфікації та вкладення`,pendingUploads:`Вивантаження на віртуальний принтер очікують на розгляд`,apiKeys:`Ключі Webhook API (нові ключі створюються під час імпорту)`},requiresPrinters:`Необхідно вибрати принтери`,zipFileWarning:`Буде створено файл ZIP.`,zipFileDescription:`До архіву ввійдуть усі файли 3MF, мініатюри, таймлапси та фотографії. Створення може тривати певний час, а отриманий файл може мати великий розмір.`,includeAccessCodes:`Додати коди доступу`,includeAccessCodesDescription:`Для перенесення на іншу машину`,includeAccessCodesWarning:`Коди доступу буде збережено у відкритому вигляді. Надійно захистіть файл резервної копії!`,categoriesSelected:`Вибрано категорії {{selectedCount}}.`},pendingUploads:{placeholders:{notes:`Додайте примітки щодо цього друку...`},discardUpload:`Відхилити вивантаження`,archiveAllUploads:`Архівувати всі вивантаження`,discardAllUploads:`Відхилити всі вивантаження`,archive:`Архів`,timeAgo:{justNow:`Просто зараз`,minutesAgo:`{{minutes}}хв тому`,hoursAgo:`{{hours}} год тому`,daysAgo:`{{days}} дн. тому`}},apiBrowser:{placeholders:{requestBody:`JSON тіло запиту...`,searchEndpoints:`Пошук кінцевих точок...`}},configureAmsSlot:{title:`Налаштувати слот AMS.`,slotConfigured:`Слот налаштовано!`,configuringSlot:`Налаштування слота:`,slotLabel:`{{ams}} Слот {{slot}}`,searchPresets:`Шукати профілі...`,colorPlaceholder:`Назва або шістнадцяткова назва кольору (наприклад, коричневий, FF8800)`,clearCustomColor:`Очистити спеціальний колір`,noCloudPresets:`Хмарних профілів немає. Увійдіть у Bambu Cloud для синхронізації.`,noPresetsAvailable:`Профілів немає. Увійдіть у Bambu Cloud або імпортуйте локальні профілі.`,noMatchingPresets:`Відповідних стилів не знайдено.`,custom:`Власний`,builtin:`Вбудований`,orcaCloud:`Orca Cloud`,bambuCloud:`Бамбукова хмара`,settingsSentToPrinter:`Налаштування надіслано на принтер`,filamentProfile:`Профіль філаменту`,kProfileLabel:`Профіль K (випередження тиску)`,filteringFor:`Фільтрування за: {{material}}`,noKProfile:`Немає профілю K (використовуйте значення за замовчуванням 0,020)`,noMatchingKProfiles:`Не знайдено відповідних K профілів. Використовуватиметься K=0,020 за замовчуванням.`,otherKProfiles:`Інші K-профілі на цьому принтері`,selectFilamentFirst:`Спочатку виберіть профіль філаменту`,kFromCalibration:`K={{value}} від калібрування принтера`,customColorLabel:`Власний колір (необов’язково)`,presetColors:`{{name}} кольори:`,showLessColors:`Показувати менше кольорів`,showMoreColors:`Показати більше кольорів`,clear:`Очистити`,hexLabel:`Шістнадцятковий: #{{hex}}`,resetting:`Скидання...`,resetSlot:`Скинути слот`,cancel:`Скасувати`,configuring:`Налаштування...`,configureSlot:`Налаштувати слот`},githubBackup:{title:`Резервне копіювання Git`,history:`історія`,downloadBackup:`Завантажити резервну копію`,restoreBackup:`Відновити резервну копію`,noBackupsYet:`Резервних копій ще немає`},emailSettings:{placeholders:{fromName:`BamBuddy`}},tagManagement:{searchTags:`Пошук тегів...`,renameTag:`Перейменувати тег`,deleteTag:`Видалити тег`},notificationTemplates:{placeholders:{title:`Назва сповіщення...`,body:`Текст сповіщення...`}},batchTag:{placeholders:{newTag:`Введіть новий тег...`}},photoGallery:{deletePhoto:`Видалити фото`},filamentHoverCard:{copySpoolUuid:`Копіювати UUID буфера`},kProfilesView:{hasNote:`Має примітку`,copyProfile:`Копіювати профіль`},layout:{openMenu:`Відкрити меню`,noPermissionSystemInfo:`У вас немає дозволу на перегляд системної інформації`},dashboard:{dragToReorder:`Перетягніть, щоб змінити порядок`,hideWidget:`Сховати віджет`},notificationProviderCard:{deleteNotificationProvider:`Видалити постачальника сповіщень`},fileManagerModal:{closeFileManager:`Закрити файловий менеджер`,sortFiles:`Сортування файлів`,goToParentFolder:`Перейти до батьківської папки`,threeView:`3D перегляд`},embeddedCameraViewer:{refreshStream:`Оновити потік`,close:`Закрити`,zoomOut:`Зменшити масштаб`,resetZoom:`Скинути масштаб`,zoomIn:`Збільшити`,dragToResize:`Перетягніть, щоб змінити розмір`},timelapseViewer:{skipBack5s:`Перейти на 5 секунд назад`,skipForward5s:`Перейти вперед на 5 с`},notificationProviders:{descriptions:{email:`Сповіщення електронною поштою SMTP`,telegram:`Сповіщення через бота Telegram.`,discord:`Надіслати на канал Discord через webhook`,ntfy:`Безкоштовні push-сповіщення з можливістю самостійного розгортання`,pushover:`Прості та надійні push-повідомлення`,callmebot:`Безкоштовні сповіщення WhatsApp через CallMeBot`,webhook:`Універсальний HTTP POST-запит на будь-який URL`}},logViewer:{searchPlaceholder:`Шукати повідомлення або назву реєстратора...`,noLogEntries:`Записів у журналі не знайдено`},switchbarPopover:{noSwitchesInSwitchbar:`На панелі перемикачів немає`},projectPageModal:{placeholders:{title:`Назва`,designer:`Дизайнер`,license:`Ліцензія`,description:`Введіть опис...`,profileTitle:`Назва профілю`,profileDescription:`Опис профілю...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`Очікування`,justNow:`Просто зараз`,now:`Зараз`,minsAgo:`{{count}}хв тому`,inMins:`в {{count}}м`,hoursAgo:`{{count}} год тому`,inHours:`в {{count}} год`,daysAgo:`{{count}} дн. тому`,inDays:`в {{count}}d`},spoolbuddy:{nav:{dashboard:`Приладова панель`,ams:`AMS`,inventory:`Інвентар`,writeTag:`Записати`,settings:`Налаштування`},status:{nfcReady:`NFC Готовий`,nfcOff:`NFC Вимк`,offline:`Не в мережі`,online:`Онлайн`,noPrinters:`Немає принтерів`,deviceOffline:`Пристрій не в мережі`,waitingConnection:`Очікування підключення пристрою...`,systemReady:`Система готова`,status:`Статус`},dashboard:{readyToScan:`Готовий до сканування`,idleMessage:`Покладіть котушку на ваги, щоб ідентифікувати її`,nfcHint:`Тег NFC буде прочитано автоматично`,device:`пристрій`,syncWeight:`Синхронізувати вагу`,weightSynced:`Синхронізовано!`,unknownTag:`Невідомий тег`,newTag:`Виявлено новий тег`,onScale:`на вагах`,linkSpool:`Прив’язати до котушки`,linkTagTitle:`Прив’язати тег до котушки`,linkTag:`Прив’язати тег`,selectSpool:`Виберіть котушку, до якої потрібно прив’язати цей тег:`,noUntagged:`Не знайдено котушок без тегів`,tagDetected:`Тег виявлено`,noTag:`Без тегу`,tagId:`Тег`,grossWeight:`Вага брутто`,spoolSize:`Розмір котушки`,close:`Закрити`,currentSpool:`Поточна котушка`,plateReady:`Пластина готова: {{name}}`,plateReadyLabel:`Пластини готові до очищення`,plateClearAction:`Очистити`,plateClearedToast:`Друкарська пластина позначена як очищена`,plateClearFailed:`Не вдалося позначити пластину як очищену`},modal:{spoolDetected:`Виявлено котушку`,assignToAms:`Призначити AMS`,syncWeight:`Синхронізувати вагу`,weightSynced:`Синхронізовано!`,syncing:`Синхронізація...`,newTagDetected:`Виявлено новий тег`,addToInventory:`Додати в інвентар`,assignToAmsTitle:`Призначити AMS`,selectSlot:`Вибрати слот`,assign:`Призначити`,assigning:`Призначення...`,assignSuccess:`Призначено!`,assignPendingInsert:`Призначений. Слот буде налаштовано, коли ви вставите котушку.`,assignError:`Не вдалося призначити котушку. Спробуйте ще раз.`,noPrinterSelected:`Виберіть принтер...`,noAmsDetected:`AMS не виявлено на цьому принтері`,slot:`Слот`},weight:{noReading:`Немає показань`,stable:`Стабільно`,measuring:`Вимірювання…`,tare:`Тарувати`,calibrate:`Відкалібрувати`},spool:{remaining:`Залишилося`,material:`матеріал`,brand:`Бренд`,color:`Колір`,coreWeight:`Сердечник`,labelWeight:`Етикетка`,scaleWeight:`Показання ваг`,netWeight:`Нетто`,lastUsed:`Останнє використання`,unknownColor:`Невідомий колір`},ams:{noData:`AMS не виявлено`,connectAms:`Підключіть AMS, щоб побачити слоти для філаментів`,noPrinter:`Принтер не вибрано`,selectPrinter:`Виберіть принтер у верхній панелі`,printerDisconnected:`Принтер відключений`,humidity:`Вологість`,level:`Рівень`,active:`Активний`,slot:`Слот`,empty:`Порожній`},inventory:{search:`Пошук котушок...`,empty:`Немає котушок в інвентарі`,noResults:`Немає відповідних котушок`,spools:`котушки`,addSpool:`Додати котушку`},settings:{tabDevice:`пристрій`,tabDisplay:`Дисплей`,tabScale:`Ваги`,tabUpdates:`Оновлення`,nfcReader:`NFC Читач`,type:`Тип`,connection:`Підключення`,notConnected:`Н/Д`,deviceInfo:`Інформація про пристрій`,hostname:`Хост`,uptime:`Час роботи`,systemConfig:`Серверна частина та автентифікація`,backendUrl:`Bambuddy Сервер URL`,apiToken:`API Токен`,apiTokenPlaceholder:`Введіть API-токен.`,saveConfig:`Зберегти конфігурацію`,systemQueued:`Конфігурацію в черзі.`,nfcDiagnostic:`NFC Діагностика`,scaleDiagnostic:`Діагностика ваг`,readTagDiagnostic:`Прочитайте діагностику тегів`,testNfc:`Тестовий читач`,testScale:`Перевірити точність`,testReadTag:`Прочитати тег`,systemFieldsRequired:`Потрібен бекенд URL.`,brightness:`Яскравість`,saved:`Збережено`,noBacklight:`Підсвічування DSI не виявлено. Для керування яскравістю потрібен дисплей DSI.`,screenBlank:`Час очікування порожнього екрана`,screenBlankDesc:`Екран вимикається після бездіяльності. Торкніться, щоб розбудити.`,displayNote:`Яскравість використовується як програмний фільтр.`,scaleCalibration:`Калібрування ваг`,currentWeight:`Поточна вага`,tareOffset:`Зміщення тари`,calFactor:`Коефіцієнт калібрування`,knownWeight:`Відома маса`,calStep1:`Приберіть усі предмети з ваг і натисніть «Установити нуль».`,calStep2:`Покладіть на ваги предмет відомої маси.`,setZero:`Встановити нуль`,calibrateNow:`Відкалібрувати`,calibrated:`Відкалібровано`,tareSet:`Надіслано команду тарування. Очікування пристрою...`,tareComplete:`Тарування завершено!`,tareTimedOut:`Час очікування тарування минув — чи запущено демон SpoolBuddy?`,tareFailed:`Не вдалося надіслати команду тарування`,zeroSet:`Нульову точку встановлено. Покладіть на ваги предмет відомої маси.`,calibrationDone:`Калібрування завершено!`,calibrationFailed:`Помилка калібрування`,lastCalibrated:`Останнє калібрування`,stable:`Стабільно`,settling:`Стабілізація…`,firmware:`Прошивка`,scale:`Ваги`,noDevice:`Пристрій SpoolBuddy не знайдено`,daemonVersion:`Демон версія`,currentVersion:`поточний`,versionPending:`В очікуванні демона...`,checking:`Перевірка...`,checkUpdates:`Перевірте наявність оновлень`,updateAvailable:`Доступне оновлення`,updateInstructions:`Оновлення через SSH: запустіть сценарій встановлення SpoolBuddy для оновлення.`,upToDate:`В актуальному стані`,includeBeta:`Включати бета-версії`},writeTag:{tabExisting:`Наявна котушка`,tabNew:`Нова котушка`,tabReplace:`Замінити тег`,searchPlaceholder:`Пошук за матеріалом, кольором, брендом...`,noUntaggedSpools:`Немає котушок без тегів`,noTaggedSpools:`Немає котушок із тегами`,selectSpool:`Виберіть котушку, а потім помістіть порожній NTAG на зчитувач`,placeTag:`Помістіть NTAG на зчитувач`,tagReady:`Тег виявлено — готовий до запису`,writeTag:`Записати тег`,replaceTag:`Замінити тег`,writing:`Записування тегу…`,waiting:`Очікування SpoolBuddy...`,writeSuccess:`Тег успішно записано!`,writeFailed:`Помилка запису`,queueFailed:`Не вдалося поставити команду запису в чергу`,tryAgain:`Спробуйте знову`,cancel:`Скасувати`,replaceWarning:`Старий тег буде від’єднано від котушки, а замість нього буде прив’язано новий.`,deviceOffline:`SpoolBuddy не в мережі`,material:`матеріал`,colorName:`Назва кольору`,color:`Колір`,brand:`Бренд`,weight:`Вага (г)`,createSpool:`Створити котушку`,creating:`Створення...`,spoolCreated:`Котушку створено! Можна записувати тег.`,createFailed:`Не вдалося створити котушку`,incompleteDataWarning:`Тег записано з неповними даними Spoolman.`},quickMenu:{printerPower:`Живлення принтера`,systemControls:`система`,restartDaemon:`Перезапустити демон`,restartBrowser:`Перезапустити браузер`,reboot:`Перезавантажити`,shutdown:`Вимкнути`,swipeToClose:`Проведіть пальцем вниз, щоб закрити`,confirmTitle:`Підтвердити`,confirmShutdown:`Вимкнути SpoolBuddy? Щоб увімкнути його знову, знадобиться фізичний доступ до пристрою.`,confirmReboot:`Перезавантажити SpoolBuddy?`,confirmRestartDaemon:`Перезапустити демон SpoolBuddy? NFC і ваги будуть тимчасово недоступні.`,confirmRestartBrowser:`Перезапустити веб-переглядач кіоску? Дисплей на короткий час погасне.`,confirm:`Підтвердити`,confirmPlugOn:`Увімкнути {{name}}?`,confirmPlugOff:`Вимкнути {{name}}?`,turnOn:`Увімкнути`,turnOff:`Вимкнути`}},diagnostic:{modalTitle:`Діагностика підключення — {{name}}`,running:`Виконується діагностика...`,runningElapsed:`Виконується діагностика… ({{elapsed}} с)`,waitingForReportHint:`Очікуємо, доки принтер опублікує звіт про стан — це може тривати до {{max}} с.`,runFailed:`Не вдалося запустити діагностику: {{error}}`,retry:`Запустити знову`,runButton:`Запустити діагностику`,sectionTitle:`Діагностика підключення`,sectionDescription:`Перевірте, чому принтер не підключається або не друкує — доступність порту, режим розробника LAN, режим мережі Docker та облікові дані.`,noPrinters:`Принтери не налаштовані.`,overall:{ok:`Проблем не виявлено — з’єднання принтера справне.`,warnings:`Принтер має працювати, але деякі параметри потребують уваги.`,problems:`Знайдено проблеми, які пояснюють, чому принтер не підключається або не друкує.`},check:{port_mqtt:{title:`Порт керування (MQTT 8883)`,pass:`Доступний — принтер приймає керівні з’єднання.`,fail:`Порт 8883 недоступний. Принтер може бути вимкнений, мати іншу IP-адресу або бути заблокований брандмауером. Перевірте IP-адресу принтера й переконайтеся, що порт 8883 не заблоковано.`},port_ftps:{title:`Порт передачі файлів (FTPS 990)`,pass:`Доступний — файли друку можна буде надсилати.`,warn:`Порт 990 недоступний. Моніторинг може й надалі працювати, але надсилання завдань друку на принтер завершуватиметься помилкою. Переконайтеся, що порт 990 не заблоковано.`,warn_no_tls:`Порт 990 відкритий, але файлова служба принтера не завершує рукостискання TLS. Файли друку, обкладинки та таймлапси отримати неможливо, тому архіви залишаються порожніми. Перезавантажте принтер — розблокування порту не допоможе.`},external_storage:{title:`Зберігання надісланих файлів у зовнішньому сховищі (крок установлення 4)`,pass:`Принтер повідомляє, що цю опцію ввімкнено — надіслані файли зберігатимуться на картці SD, а архіви матимуть мініатюри та метадані слайсера.`,fail:`Принтер повідомляє, що цей параметр вимкнено. Увімкніть «Зберігати надіслані файли в зовнішньому сховищі». У новіших версіях прошивки (P2S 01.02 / Bambu Studio 2.6+) перемикач розташований у налаштуваннях друку на принтері; у старіших — на вкладці «Пристрій» у Bambu Studio або OrcaSlicer. Без цього параметра в кожному архівованому друці будуть відсутні мініатюра та метадані слайсера.`,skip:`Не перевірено — потрібне активне MQTT-з’єднання. У старіших слайсерах, де цей параметр існує лише в самому слайсері, принтер його не повідомляє. Тому перевірка може бути успішною навіть за вимкненого параметра — перевірте крок установлення 4 вручну.`,skip_unsupported_model:`Ця модель має слот для SD-картки, але не дає змоги ввімкнути цей параметр: поточна прошивка принтерів серії P1 не показує перемикач у Bambu Studio, а сам принтер не має екрана. Виправляти нічого не потрібно; доки Bambu Lab не додасть підтримку в прошивці, в архівованих друках можуть бути відсутні мініатюри та метадані слайсера.`,fail_no_media:`Параметр увімкнено, але принтер не бачить ані картки, ані флешки у слоті, тож надісланим файлам немає куди подітися. Вставте носій і надрукуйте ще раз — доти кожен заархівований друк буде без мініатюри та метаданих слайсера.`,warn_internal_storage:`Параметр увімкнено і носій на місці, але останній друк усе одно потрапив у внутрішню пам'ять принтера, яку Bambuddy не може прочитати. На серії H2, P2S та X2D кнопка «Друк» у Bambu Studio завжди надсилає туди, незалежно від цього параметра. Друки архівуються з назвою та часом, але без мініатюри та метаданих слайсера. Щоб архіви були повними, запускайте друк із Bambuddy, нарізайте в OrcaSlicer або в Bambu Studio скористайтеся «Надіслати» із «Зовнішнім носієм», а потім запускайте друк.`,warn_internal_history:`Опція увімкнена й носій на місці, але останній друк ішов із файлу, який уже був на принтері, — повторний друк з його екрана, запуск із Handy або файл, надісланий раніше. Ця бібліотека лежить у внутрішній пам'яті, яку Bambuddy не читає, і жодні налаштування цього не змінюють: для того друку нічого не надсилалося. Він і далі архівується з назвою та часом, але без мініатюри та метаданих слайсера. Щоб архіви були повними, запускайте друк із Bambuddy або надсилайте його зі слайсера.`},port_rtsps:{title:`Порт камери ({{protocol}} {{port}})`,pass:`Доступно — потік камери працюватиме.`,warn:`Порт {{port}} недоступний. Перегляд з камери в реальному часі не працюватиме. Це не впливає на друк.`},macos_local_network:{title:`Дозвіл macOS на доступ до локальної мережі`,pass:`macOS дозволяє Bambuddy доступ до локальної мережі.`,warn_unsigned:`Python, під яким працює Bambuddy, не має підпису коду, тож macOS нема до чого прив’язати дозвіл на локальну мережу і мовчки відкидає всі з’єднання з принтером — без помилки та без запиту. Запустіть сценарій оновлення Bambuddy (install/update_macos.sh), який його підписує, і перезапустіть Bambuddy. Інтерпретатор: {{executable}}`,warn_permission:`Якщо принтер увімкнений і доступний за цією адресою, відкрийте Системні параметри > Конфіденційність і безпека > Локальна мережа та переконайтеся, що Python від Bambuddy увімкнено. Інакше macOS мовчки відкидає локальні з’єднання, а оновлення Python може залишити старий дозвіл позаду.`},network_mode:{title:`Мережевий режим контейнера`,genericRuntime:`контейнері`,pass:`Працює в {{runtime}} із мережею хоста.`,warn:`Bambuddy працює в {{runtime}} із мостовою мережею. Для виявлення принтерів і роботи віртуального принтера потрібна мережа хоста — повторно створіть контейнер із мережею хоста ("network_mode: host" у docker-compose, "--network=host" для Podman).`,skip:`Не працює в контейнері — не застосовується.`,skip_unknown:`Bambuddy працює в {{runtime}}, але визначити мережевий режим не вдалося. Якщо виявлення принтерів або віртуальний принтер не працюють, повторно створіть контейнер із мережею хоста.`,skip_system_container:`Bambuddy працює в системному контейнері {{runtime}}, який перебуває в локальній мережі як віртуальна машина — не застосовується.`},subnet:{title:`Мережева підмережа`,pass:`Принтер і Bambuddy знаходяться в одній підмережі.`,warn:`Принтер ({{printer_ip}}) і Bambuddy ({{host_ip}}) перебувають у різних підмережах. Вони можуть не мати зв’язку між собою, якщо маршрутизацію між підмережами не налаштовано.`,skip:`Не вдалося визначити підмережу — пропущено.`},mqtt_auth:{title:`Облікові дані принтера`,pass:`Принтер прийняв підключення.`,fail:`Принтер доступний, але Bambuddy до нього не під’єднано. Найімовірніше, указано неправильний код доступу або серійний номер — код доступу змінюється після кожного перемикання режиму «Лише LAN» або режиму розробника, тож знову скопіюйте його з екрана принтера. Так само виглядає принтер, який перезавантажується або вже вичерпав ліміт одночасних з’єднань.`,fail_auth_rejected:`Принтер відхилив облікові дані Bambuddy. Код доступу або серійний номер неправильний — код доступу змінюється після кожного перемикання режиму «Лише LAN» або режиму розробника. Знову скопіюйте його з екрана принтера та збережіть у налаштуваннях принтера.`,skip:`Не позначено — принтер недоступний.`},developer_mode:{title:`Режим розробника LAN`,pass:`Режим розробника ввімкнено.`,fail:`Режим розробника на принтері ВИМКНЕНО. Увімкніть його в налаштуваннях LAN принтера й підтвердьте вибір кнопкою OK. Без цього друк не запускатиметься.`,skip:`Неможливо перевірити — потрібне живе підключення до принтера.`},printer_publishing:{title:`Принтер публікує дані про стан`,pass:`Принтер публікує оновлення статусу — AMS, філаменти та K-профілі правильно відображатимуться на слайсері.`,fail:`MQTT-брокер прийняв з’єднання, але принтер не опублікував жодного звіту про стан. Майже завжди причиною є неправильний серійний номер або неправильний регістр символів: тема device/<serial>/report чутлива до регістру. Звірте серійний номер у налаштуваннях Bambuddy із номером на екрані принтера.`,skip:`Неможливо перевірити — потрібне живе підключення до принтера.`}}},systemHealth:{sectionTitle:`Стан системи`,sectionDescription:`Сканує останні журнали на наявність відомих проблем, які зазвичай можна вирішити самостійно, перш ніж вони перетворяться на запит у службу підтримки.`,rescan:`Пересканувати`,clean:`В останніх записах журналу {{times}} не знайдено відомих проблем.`,logUnavailable:`Журналування файлів вимкнено, тому журнали неможливо сканувати. Увімкніть журналювання файлів, щоб використовувати цю перевірку.`,learnMore:`Як виправити`,fixLabel:`Виправити:`,occurrences:`Виявлено {{times}} разів — востаннє о {{lastSeen}}`,category:{layer8:`Ви можете це виправити`,environment:`Середовище виконання`,bug:`Будь ласка, повідомте про це`},signature:{"ftp-auth-rejected":{name:`Принтер відхилив код доступу`,cause:`Принтер відмовився від входу для передавання файлів. Код доступу неправильний або він змінився після перемикання режиму розробника.`,fix:`Повторно скопіюйте код доступу з екрана принтера (налаштування LAN) і оновіть його в налаштуваннях принтера в Bambuddy.`},"ftp-connection-timeout":{name:`Час очікування з’єднання для передачі файлів минув`,cause:`Bambuddy не вдалося отримати доступ до порту передачі файлів принтера (FTPS 990). Порт заблоковано, або принтер вимкнено або знаходиться в іншій підмережі.`,fix:`Переконайтеся, що ніщо не блокує порт 990 між Bambuddy і принтером, і що обидва знаходяться в одній мережі.`},"ftp-ssl-error":{name:`Помилка захищеного з’єднання для передавання файлів`,cause:`Файлова служба принтера відповіла на порту 990 без TLS. Її файловий сервер завис — це несправність самого принтера, а не брандмауера чи прошивки.`,fix:`Перезапустіть принтер. До того часу файли друку, обкладинки та таймлапси отримати неможливо, але на сам друк це не впливає.`},"bambu-cloud-captcha":{name:`Bambu Cloud вимагає пройти CAPTCHA`,cause:`Захист Bambu від зловживань перевіряє цю мережу, тож завершити вхід у Bambu Cloud неможливо. Це пов'язано з публічною IP-адресою, а не з вашим обліковим записом чи цією інсталяцією.`,fix:`Зачекайте: зазвичай перевірка зникає за кілька годин, а повторні спроби входу її подовжують. Тим часом увійдіть за допомогою токена доступу із сеансу браузера.`},"mqtt-connection-flapping":{name:`Підключення до принтера постійно падає`,cause:`Керуюче з’єднання (MQTT 8883) неодноразово роз’єднується та знову під’єднується — зазвичай через слабкий мережевий шлях або частково заблокований порт.`,fix:`Перевірте сигнал Wi-Fi на принтері, віддайте перевагу дротовому підключенню та переконайтеся, що порт 8883 надійно доступний.`},"camera-connection-refused":{name:`Потік з камери недоступний`,cause:`Не вдається отримати доступ до камери в прямому ефірі через порт RTSPS 322. Порт заблоковано, або на принтері вимкнено камеру або LAN liveview.`,fix:`Увімкніть камеру та LAN liveview на принтері та переконайтеся, що порт 322 не заблоковано. Це не впливає на друк.`},"database-locked":{name:`Конфлікт запису до бази даних`,cause:`Під навантаженням SQLite повертає помилки "database is locked". Це часто трапляється, коли одночасно працюють кілька принтерів.`,fix:`Переключіть Bambuddy на зовнішню базу даних PostgreSQL. Див. посібник PostgreSQL у документації.`}}},vpDiagnostic:{title:`Перевірка налаштувань — {{name}}`,runButton:`Запустити перевірку налаштувань`,running:`Виконується перевірка налаштувань...`,runFailed:`Не вдалося виконати перевірку налаштувань: {{error}}`,retry:`Запустити знову`,overall:{ok:`Усі перевірки пройшли — цей віртуальний принтер налаштовано правильно.`,warnings:`Віртуальний принтер має працювати, але деякі параметри потребують уваги.`,problems:`Знайдено проблеми, які пояснюють, чому слайсер не бачить або не використовує цей віртуальний принтер.`},check:{enabled:{title:`Віртуальний принтер увімкнено`,fail:`Цей віртуальний принтер вимкнено. Увімкніть його, щоб зробити його видимим.`},running:{title:`Служби запущені`,fail:`Віртуальний принтер увімкнено, але його служби не працюють. Перевірте журнал Bambuddy — зазвичай запуску заважає конфлікт IP-адреси прив’язки або помилка дозволів.`},bind_interface:{title:`Прив’язка мережевого інтерфейсу`,fail:`Інтерфейс прив’язки не встановлено або більше не існує на цьому хості. Виберіть поточний інтерфейс у спадному списку «Інтерфейс прив’язки».`},access_code:{title:`Код доступу встановлено`,fail:`Код доступу не встановлено. У слайсері потрібно вказати той самий 8-символьний код доступу, який задано тут.`},target_printer:{title:`Цільовий принтер`,fail:`Цільовий принтер не вибрано. У режимі проксі потрібен фізичний принтер, якому пересилатимуться завдання.`,warn:`Цільовий принтер наразі не в мережі — проксі-сервер відновиться після повторного підключення.`},port_ftps:{title:`Служба вивантаження файлів (порт {{port}})`,fail:`На порту {{port}} IP-адреси прив’язки немає служби, що приймає з’єднання, тому слайсер не може вивантажити файли. Зазвичай причиною є конфлікт порту на цьому інтерфейсі.`},port_mqtt:{title:`Служба керування (порт {{port}})`,fail:`На порту {{port}} IP-адреси прив’язки немає служби, що приймає з’єднання, тому слайсер не може підключитися або показати стан.`},port_bind:{title:`Служба виявлення (порт {{port}})`,fail:`На порту {{port}} IP-адреси прив’язки немає служби, що приймає з’єднання, тому слайсер не може завершити процедуру виявлення.`},privileged_ports:{title:`Прив’язка до привілейованих портів`,fail:`Порт {{port}} нижче 1024, і цій службі не дозволено його займати — тому вище ніщо не слухає. Додайте AmbientCapabilities=CAP_NET_BIND_SERVICE до /etc/systemd/system/bambuddy.service і перезапустіть або виконайте "sudo setcap cap_net_bind_service=+ep $(readlink -f $(which python3))". У Docker додайте cap_add: [NET_BIND_SERVICE].`},certificate:{title:`Сертифікат TLS`,pass:`Сертифікат готовий. Переконайтеся, що наведений вище сертифікат центру сертифікації Bambuddy імпортовано до сховища довірених сертифікатів слайсера.`,fail:`Сертифікат TLS для цього віртуального принтера відсутній. Перевірте, чи доступний для запису каталог даних Bambuddy.`}}},bugReport:{title:`Повідомити про помилку`,description:`опис`,descriptionPlaceholder:`Що пішло не так? Будь ласка, опишіть проблему...`,email:`Електронна адреса (необов’язково)`,emailPlaceholder:`your@email.com`,emailPrivacy:`Якщо надано, вашу електронну адресу буде включено до згорнутого розділу проблеми GitHub, щоб спеціаліст із супроводу міг відслідковувати.`,screenshot:`Скріншот`,uploadOrPaste:`Вивантажити, вставити або перетягнути зображення`,dataCollectedSummary:`Які дані містяться у звіті?`,dataIncluded:`У комплекті:`,dataIncludedList:`Версія додатка, OS, архітектура, версія Python, статистика бази даних (лише для підрахунку), моделі принтерів, кількість сопел, версії прошивки, статус підключення, статус інтеграції (Spoolman, MQTT, HA), неконфіденційні налаштування, кількість мережевих інтерфейсів, Docker деталі, версії залежностей.`,dataNeverIncluded:`Ніколи не додаються:`,dataNeverIncludedList:`Назви принтерів, серійні номери, коди доступу, паролі, IP-адреси, адреси електронної пошти, ключі API, токени, URL вебхуків, імена хостів або користувачів.`,submit:`Надіслати`,startLogging:`Розпочати журнал налагодження`,stepEnableLogging:`Журнал налагодження ввімкнено`,stepReproduce:`Відтворіть проблему зараз`,stepStopLogging:`Зупинити та подати звіт`,stopAndSubmit:`Зупинити та надіслати`,maxDuration:`Автоматична зупинка через {{minutes}} хв`,stoppingLogs:`Збір журналів і надсилання...`,submitting:`Надсилання звіту про помилку...`,submittingStepConnection:`Запуск перевірки підключення принтера`,submittingStepVirtualPrinters:`Виконання перевірок налаштування віртуального принтера`,submittingStepLogScan:`Сканування останніх журналів на наявність відомих проблем`,submittingStepSubmit:`Надсилання звіту GitHub`,submitSuccess:`Звіт про помилку успішно надіслано!`,submitFailed:`Не вдалося надіслати звіт про помилку`,diagnosticChecking:`Перевірка підключень принтера...`,diagnosticHealthy:`Перевірку підключення пройдено — проблем із принтерами не виявлено.`,diagnosticSummary:`Проблеми з підключенням мають {{problems}} із {{total}} принтерів`,diagnosticIntro:`Один або кілька принтерів мають проблему з підключенням, яка може спричиняти описану несправність. Розгорніть запис принтера нижче, щоб переглянути спосіб виправлення. Усунення цієї проблеми може допомогти без створення звіту про помилку, але за потреби звіт усе одно можна надіслати нижче.`,logHealthSummary:`У ваших журналах знайдено відомі проблеми`,logHealthIntro:`Останні журнали відповідають відомим проблемам. Перегляньте наведені нижче виправлення — їх вирішення може вирішити вашу проблему без повідомлення про помилку. Ви все ще можете надіслати звіт нижче.`,thankYou:`дякую!`,submitted:`Ваш звіт про помилку надіслано.`,viewIssue:`Переглянути випуск`,closeKeepsRecording:`Ви можете закрити цю панель, поки відтворюєте проблему: запис триває, і після повторного відкриття ви повернетеся сюди.`,resumeRecording:`Триває запис звіту про помилку — {{elapsed}}. Натисніть, щоб завершити.`,resumeReport:`Продовжити звіт`,unexpectedError:`Сталася неочікувана помилка`},failureDetection:{title:`Виявлення помилок за допомогою ШІ`,description:`Відстежуйте друк за допомогою самостійно розгорнутого Obico ML API та автоматично реагуйте на виявлені помилки.`,mlUrl:`URL Obico ML API`,mlUrlHint:`База URL вашого контейнера ml_api, розміщеного на власному хості Obico (наприклад, http://192.168.1.10:3333).`,mlToken:`Токен ML API (необов'язково)`,mlTokenPlaceholder:`Залиште порожнім, якщо сервер працює без ML_API_TOKEN`,mlTokenHint:`Має збігатися зі змінною середовища ML_API_TOKEN вашого контейнера Obico ml_api. Залиште порожнім, якщо контейнер працює без токена.`,test:`Тест`,testSuccess:`ML API доступний і працює належним чином.`,testSuccessTokenUnknown:`ML API доступний і працює належним чином. Не вдалося перевірити токен.`,testFailed:`Не вдалося підключитися до ML API.`,sensitivity:`Чутливість`,sensitivityLow:`Низький (менше помилкових спрацьовувань)`,sensitivityMedium:`Середній (збалансований)`,sensitivityHigh:`Високий (виявляти рано, більше помилкових спрацьовувань)`,sensitivityHint:`Налаштовує пороги впевненості, за яких формуються попередження та фіксуються помилки.`,action:`Дія в разі виявлення помилки`,actionNotify:`Лише сповіщати`,actionPause:`Призупинити друк`,actionPauseOff:`Призупинити друк і вимкнути живлення`,pollInterval:`Інтервал опитування (секунди)`,pollIntervalHint:`Як часто перевіряти кожен принтер під час друку. Мінімум 5 с, максимум 120 с.`,externalUrlMissing:`Зовнішній URL не встановлено.`,externalUrlHint:`ML API отримує знімок із камери за URL. Укажіть зовнішній URL у загальних налаштуваннях, щоб контейнер ML API міг підключитися до Bambuddy.`,perPrinterTitle:`Принтери під спостереженням`,perPrinterHint:`Виберіть, які принтери перевіряє служба виявлення.`,monitorAll:`Відстежувати всі підключені принтери`,statusTitle:`Статус`,serviceRunning:`Служба працює`,thresholds:`Нижній / верхній поріг`,activePrinters:`Активні завдання друку`,noActivePrints:`Зараз немає роздруківок.`,historyTitle:`Останні виявлення`,noHistory:`Виявлень ще немає.`},makerworld:{title:`MakerWorld`,description:`Вставте модель MakerWorld URL, щоб імпортувати та роздрукувати її безпосередньо з Bambuddy — не виходячи з програми Bambu Handy.`,pasteUrlHeader:`Імпортувати з MakerWorld`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… або вставте будь-яке посилання MakerWorld.`,resolveButton:`Розв’язати`,signInRequiredTitle:`Для завантаження потрібно увійти в Bambu Cloud`,signInRequiredBody:`Ви можете переглядати деталі моделі анонімно, але для MakerWorld потрібен обліковий запис Bambu Cloud для завантаження файлів 3MF.`,signInExpiredTitle:`Термін входу в Bambu Cloud минув`,signInExpiredBody:`Ви все ще ввійшли в Bambuddy, але Bambu Lab більше не приймає збережений токен, тому завантаження не вдасться. Знову ввійдіть у Bambu Cloud.`,openCloudSettings:`Відкрити налаштування Cloud`,untitledModel:`Модель без назви`,byCreator:`від {{name}}`,downloadsCount:`{{count}} завантажень`,licensePrefix:`Ліцензія`,alreadyImported:`Вже в бібліотеці`,openOnMakerworld:`Відкрити MakerWorld`,alreadyInLibrary:`Ця модель уже є у вашій бібліотеці — знайдіть її в Менеджері файлів → MakerWorld`,importSuccess:`Імпортовано {{filename}} — збережено в менеджері файлів → MakerWorld`,platesHeader:`Пластини ({{count}})`,plateDefaultName:`Пластина {{n}}`,materialCount:`Філаментів: {{count}}`,amsRequired:`Потрібен AMS`,slicedFor:`Нарізано для {{printer}}`,alsoCompatible:`Також позначено як сумісний: {{printers}}`,importToLibrary:`Зберегти`,sliceIn:`Зберегти й нарізати в {{slicer}}`,disclaimer:`Інтеграція MakerWorld використовує кінцеві точки API, задокументовані спільнотою. Bambuddy не є філією та не підтримується MakerWorld або Bambu Lab.`,lastImportSuccess:`Імпортовано до вашої бібліотеки`,lastImportAlreadyInLibrary:`Уже у вашій бібліотеці`,viewInLibrary:`Переглянути в менеджері файлів`,openInBambuStudio:`Відкрити в Bambu Studio`,openInOrcaSlicer:`Відкрити в OrcaSlicer`,importTo:`Імпорт до файлового менеджера`,recentImportsHeader:`Недавній імпорт`,phaseResolving:`Розв’язування`,phaseDownloading:`Завантаження`,folderAuto:`MakerWorld (за замовчуванням)`,importAll:`Імпортувати все`,importAllProgress:`Імпорт {{current}}/{{total}}`,openGallery:`Відкрити галерею зображень`,galleryPrev:`Попереднє зображення`,galleryNext:`Наступне зображення`,deleteImport:`Видалити з бібліотеки`,importDeleting:`Видалення…`,importDeleted:`Видалено з бібліотеки`,confirmDelete:`Видалити {{filename}} з бібліотеки? Локальний файл буде видалено, але цю друкарську пластину можна буде повторно імпортувати з MakerWorld.`,errors:{resolveFailed:`Не вдалося вирішити MakerWorld URL.`,downloadFailed:`Помилка завантаження. Спробуйте ще раз.`,deleteFailed:`Не вдалося видалити файл із бібліотеки.`}},gcodeViewer:{filamentSlot:`Філамент {{n}}`,loading:`Читання траєкторії…`,loadFailed:`Не вдалося завантажити G-код цього файлу.`,showTravel:`Холості переміщення`,topLayer:`Верхній шар`,bottomLayer:`Нижній шар`,noSource:`Файл для перегляду не вказано.`,view:{filament:`Філамент`,feature:`Тип`,height:`Висота`,width:`Ширина`},feature:{wall:`Стінки`,sparseInfill:`Розріджене заповнення`,solidInfill:`Суцільне заповнення`,bridge:`Міст / навис`,support:`Підтримка`,skirt:`Спідниця / облямівка`,gapFill:`Заповнення проміжків`,ironing:`Розгладжування`,primeTower:`Вежа очищення`},back:`Назад`,backToArchives:`Назад до друку архівів`,backToFiles:`Назад до файлового менеджера`,plates:`Пластини`,plateN:`Пластина {{n}}`},libraryTrash:{title:`Кошик`,headerButton:`Кошик`,headerTooltip:`Переглянути файли, переміщені в кошик`,backToFiles:`Назад до файлового менеджера`,subtitleAdmin:`Видалені файли залишаються тут протягом {{days}} днів, а потім автоматично видаляються. У цьому режимі перегляду відображаються файли, видалені в кошик для всіх користувачів.`,subtitleUser:`Видалені файли залишаються тут протягом {{days}} днів, а потім автоматично видаляються.`,loading:`Завантаження кошика…`,loadError:`Не вдалося завантажити кошик.`,empty:`Кошик порожній.`,summary:`Файлів: {{count}} · {{size}}`,emptyTrash:`Очистити кошик`,restore:`Відновити`,purgeNow:`Видалити зараз`,autoPurgeIn:`Автоматичне видалення через {{when}}`,days:`днів`,retentionLabel:`Автоматичне видалення після`,selectAll:`Вибрати все`,selectOne:`Вибрати {{filename}}`,selectionCount:`Вибрано {{count}}.`,bulkRestore:`Відновити вибране`,bulkPurge:`Видалити вибране`,col:{filename:`Файл`,folder:`Папка`,size:`Розмір`,deleted:`Переміщено в кошик`,autoPurge:`Автоматичне видалення`,owner:`Власник`,actions:`Дії`},confirm:{purgeTitle:`Видалити остаточно?`,purgeBody:`{{filename}} буде видалено з диска та не підлягає відновленню.`,emptyTitle:`Очистити кошик?`,emptyBody:`З диска буде остаточно видалено всі файли ({{count}}). Цю дію неможливо скасувати.`,bulkPurgeTitle:`Видалити вибрані файли назавжди?`,bulkPurgeBody:`Вибрані файли ({{count}}) буде видалено з диска без можливості відновлення.`,cta:`Видалити остаточно`},toast:{restored:`Файл відновлено.`,restoreFailed:`Не вдалося відновити файл.`,purged:`Файл видалено остаточно.`,purgeFailed:`Не вдалося видалити файл.`,emptied:`Файлів остаточно видалено з кошика: {{count}}.`,emptyFailed:`Не вдалося очистити кошик.`,retentionSaved:`Для автоматичного видалення встановлено {{days}} днів.`,retentionFailed:`Не вдалося зберегти налаштування збереження.`,bulkRestored:`Відновлено файлів: {{count}}`,bulkPurged:`Файлів остаточно видалено: {{count}}.`}},libraryPurge:{title:`Очистити старі файли`,headerButton:`Очищення старого`,headerTooltip:`Масове переміщення старих файлів у кошик`,description:`Однією дією перемістіть старі файли з бібліотеки до кошика. Вік файлів з історією друку визначається за датою останнього друку, а файлів, які ще не друкувалися, — за датою вивантаження.`,ageLabel:`Перемістити файли, старші за`,days:`днів`,includeNeverPrinted:`Включати файли, які ніколи не друкувались`,effectsTitle:`Що відбудеться після натискання «Очистити»`,effect1:`Відповідні файли переміщуються в кошик — вони ще не видалені з диска.`,effect2:`Ви можете будь-коли відновити їх із кошика, доки не закінчиться період зберігання.`,effect3:`Після завершення строку зберігання служба очищення кошика остаточно видалить файли з диска.`,effect4:`Файли у зовнішніх (зв’язаних) папках пропускаються — Bambuddy ніколи не видаляє байти, які йому не належать.`,previewLoading:`Перевірка кількості файлів…`,previewFailed:`Не вдалося попередньо переглянути очищення.`,previewSummary:`Файли {{count}} · {{size}} буде переміщено до кошика`,andMore:`…і {{count}} більше`,warning:`Файли в кошику й надалі займають місце, доки не завершиться строк зберігання. Щоб звільнити місце на диску негайно, після цього очистьте кошик.`,confirmCta:`Перемістити до кошика ({{count}})`,purging:`Переміщення в кошик…`,toast:{success:`Переміщено до кошика файлів: {{count}}`,failed:`Не вдалося очистити файли.`}},libraryAutoPurge:{enableLabel:`Автоматичне очищення старих файлів`,enableDescription:`Запускає очищення адміністратора один раз на день. Файли спочатку потрапляють у кошик — вони не видаляються одразу.`,ageLabel:`Автоматичне очищення файлів, старших за`,ageDescription:`Мінімум 7 днів, максимум 10 років. Використовує те саме вікове правило, що й ручна кнопка очищення.`,days:`днів`,includeNeverPrinted:`Включати файли, які ніколи не друкувались`,saveFailed:`Не вдалося зберегти налаштування автоматичного очищення.`},archivePurge:{headerButton:`Очищення старого`,headerTooltip:`Масове видалення старих архівів`,title:`Очистити старі архіви`,description:`Очистити стару історію друку. Кожен архів старіє відповідно до останнього завершення друку — повторний друк архіву оновлює його вік, тому активна робота ніколи не очищається.`,ageLabel:`Видалити архіви, не надруковані в останньому`,days:`днів`,effectsTitle:`Що відбудеться після натискання «Очистити»`,effect1:`Кожен відповідний архів приховано зі списків, а його файли видалено з диска (3MF, ескіз, покадрова зйомка, вихідний 3MF, F3D файл дизайну, фотографії).`,effect2:`Запис архіву залишиться в базі даних, тому «Швидка статистика» й надалі враховуватиме філамент, час, вартість та енергію — як і за типового видалення окремого архіву.`,effect3:`Позначте нижче «Також видалити зі статистики», щоб вилучити внесок цих архівів зі «Швидкої статистики» — так само, як у відповідній опції видалення окремого архіву. Цю дію неможливо скасувати.`,effect4:`Повторний друк архіву оновлює його віковий годинник, тому архіви, якими ви все ще користуєтеся, залишаються в безпеці.`,purgeStatsLabel:`Також видалити зі статистики`,purgeStatsHint:`Вилучає внесок відповідних архівів зі «Швидкої статистики» — філамент, час, вартість та енергію. Якщо параметр вимкнено, статистичні дані зберігаються, а з диска видаляються лише файли.`,previewLoading:`Перевірка кількості архівів, що збігаються…`,previewFailed:`Не вдалося попередньо переглянути очищення.`,previewSummary:`Архіви {{count}} · {{size}} буде видалено`,andMore:`…і {{count}} більше`,warning:`Файли видаляються з диска і не можуть бути відновлені. Перш ніж продовжити, завантажте або додайте до вибраного все, що хочете зберегти.`,confirmCta:`Видалити архіви ({{count}})`,purging:`Видалення…`,toast:{success:`Видалено архівів: {{count}}`,failed:`Не вдалося очистити архіви.`}},archiveAutoPurge:{enableLabel:`Автоматичне очищення старих архівів`,enableDescription:`Один раз на день приховує архіви зі списків і видаляє їх файли з диска, якщо вони не були надруковані в межах порогу. Повторний друк архіву скидає годинник.`,ageLabel:`Автоматичне видалення архівів, не надрукованих в останньому`,ageDescription:`Мінімум 7 днів, максимум 10 років. На основі останнього завершення друку — повторний друк архіву оновлює його вік. Видаляє 3MF, мініатюру, покадрову зйомку, джерело 3MF, F3D і фотографії.`,days:`днів`,purgeStatsLabel:`Також видалити зі статистики`,purgeStatsDescription:`Якщо параметр увімкнено, щоденне очищення також вилучатиме внесок кожного видаленого архіву зі «Швидкої статистики» — філамент, час, вартість та енергію. Типово параметр вимкнено: статистичні дані зберігаються, а з диска видаляються лише файли.`,runNow:`Очистити архіви зараз`,saveFailed:`Не вдалося зберегти налаштування автоматичного очищення.`},cameraTokens:{scope:{camera_stream:`Потік камери`,camwall:`Панель камер`,overlay:`Потокове накладання`},title:`API-токени камери`,navTitle:`API-токени камери`,description:`Довгострокові токени для вбудовування потоку камери в Home Assistant, Frigate, кіоски або інші засоби, яким потрібен постійний URL. Під час створення виберіть область доступу; токен можна відкликати будь-коли.`,loading:`Завантаження…`,confirmRevoke:{title:`Відкликати цей токен?`,body:`Усі пристрої, що використовують «{{name}}», негайно втратять доступ. Цю дію неможливо скасувати.`,cancel:`Скасувати`,confirm:`Відкликати`},create:{scopeLabel:`Область застосування`,hintCameraStream:`Токен потоку камери дає змогу отримувати лише потоки з камер і знімки. Використовуйте його для Home Assistant, Frigate або іншого засобу, що вбудовує одну камеру.`,hintCamWall:`Токен Cam Wall відкриває /camwall на екрані без входу. Він може бачити назву та стан кожного принтера, а також потоки з камери. Він не може бачити імена файлів, адреси чи коди доступу.`,hintOverlay:`Токен потокового накладання відкриває /overlay/{printerId} на екрані без входу — для OBS або будь-якої прямої трансляції. Він дає змогу переглядати потік із камери одного принтера та стан друку в реальному часі, зокрема назву файлу, показану на екрані. Він не надає доступу до адрес чи кодів доступу.`,title:`Створити новий токен`,nameLabel:`Назва токена`,namePlaceholder:`напр. Home Assistant`,daysLabel:`Днів до закінчення терміну дії`,submit:`Створити`,hint:`Максимальний строк дії — 365 днів. Значення токена буде показано лише один раз під час створення — скопіюйте його зараз.`},created:{camWallUrlTitle:`Cam Wall URL для цього дисплея`,camWallUrlHint:`Відкрийте цей URL на потрібному екрані. Будь-хто, хто отримає URL, зможе переглядати панель камер, тому захищайте його як ключ доступу. Щоб негайно припинити доступ із цього екрана, відкличте токен.`,overlayUrlTitle:`Накладання URL для OBS`,overlayUrlHint:`Додайте цей URL в OBS як джерело браузера. Замініть число в /overlay/1 номером принтера з його URL на сторінці «Принтери». Будь-хто, хто отримає URL, зможе переглядати трансляцію, тому захищайте його як ключ доступу. Щоб негайно припинити доступ, відкличте токен.`,title:`Токен створено — скопіюйте його зараз`,warning:`Це єдиний раз, коли токен буде показано. Після закриття цього діалогового вікна переглянути його знову буде неможливо.`,copy:`Копіювати`,dismiss:`Я зберіг токен`},list:{scope:`Область застосування`,myTitle:`Мої токени`,allTitle:`Усі користувачі (перегляд адміністратора)`,empty:`Токенів ще немає.`,name:`Назва`,owner:`Власник`,prefix:`Префікс`,created:`Створено`,expires:`Термін дії закінчується`,lastUsed:`Останнє використання`,revoke:`Відкликати`,expired:`Термін дії минув`},toast:{created:`Токен створено`,createFailed:`Не вдалося створити токен`,revoked:`Токен відкликано`,revokeFailed:`Не вдалося відкликати токен`,loadFailed:`Не вдалося завантажити токени`,copied:`Скопійовано в буфер обміну`,copyFailed:`Не вдалося копіювати — виберіть і скопіюйте вручну`}},forecast:{title:`Прогноз`,noSpools:`Не знайдено активних котушок. Додайте котушки до свого інвентарю, щоб переглянути прогнозні дані.`,noUsageData:`Немає даних про використання — неможливо спроєктувати хронологію запасів.`,sku:`SKU`,material:`матеріал`,stock:`Запас`,dailyRate:`Добове споживання`,daysLeft:`Залишилося днів`,emptyBy:`Вичерпається до`,reorderBy:`Замовити до`,actions:`Дії`,trend:`Тренд`,estimated:`Приблизно`,noData:`Немає даних`,timeframe:`Період`,chartTitle:`Прогнозований запас — топ-5 матеріалів`,dashedLinesROP:`Пунктирні лінії — точки повторного замовлення`,stockLevel:`Рівень запасів`,reorderPoint:`Точка повторного замовлення`,safetyMargin:`Запас безпеки`,trendLegend:`Тенденція (на основі історії, рівень обслуговування 95%)`,estimatedLegend:`Розрахункова (дельта ваги)`,noDataLegend:`Немає даних`,ropLabel:`ROP`,ssLabel:`SS`,safetyStockLegend:`Страховий запас`,stockArrivalLegend:`Надходження запасів`,stockoutLegend:`Дефіцит`,alertCount_one:`Сповіщень: {{count}}`,alertCount_other:`Сповіщень: {{count}}`,order:`Замовлення`,save:`Зберегти`,cancel:`Скасувати`,settingsSaved:`Налаштування збережено`,failedSaveSettings:`Не вдалося зберегти налаштування`,globalLeadTimeSaved:`Загальний строк постачання збережено`,globalLeadTime:`Загальний строк постачання`,globalLeadTimeHint:`Мінімальний строк постачання для розрахунку точки повторного замовлення всіх SKU`,skuLeadTimeOverride:`Інший строк постачання`,skuLeadTimeHint:`0 — використовувати загальний строк. Установіть значення понад 0, щоб перевизначити його для цього SKU.`,safetyMarginLabel:`Запас безпеки`,effectiveLeadTime:`Розрахунковий строк постачання`,effectiveLeadTimeHint:`max(глобальний {{global}}d, SKU {{sku}}d)`,reorderPointHint:`d̄ × LT + страховий запас — замовляйте, коли запас досягне цього рівня`,safetyMarginHint:`Статистичний страховий запас (z=1,65 × σ × √LT) + визначений користувачем буфер`,safetyMarginHintDays:`Буфер додано поверх статистичного страхового запасу.{{approx}}`,safetyMarginHintDaysApprox:` ≈ {{g}} г за поточного рівня споживання.`,safetyMarginHintG:`Буфер фіксованої ваги, доданий поверх статистичного страхового запасу.{{approx}}`,safetyMarginHintGApprox:` ≈ {{days}} дн. за поточного рівня споживання.`,individualSpools:`Окремі котушки`,labelWeight:`Вага за етикеткою`,spoolCount_one:`Котушок: {{count}}`,spoolCount_other:`Котушок: {{count}}`,stockBreakRisk:`Ризик вичерпання запасу`,stockBreakDetail:`Залишилося {{days}} дн.; строк постачання — {{lt}} дн.`,stockBreakBefore:`Запас вичерпається до поповнення`,reorderNow:`Замовити зараз`,reorderTriggerPassed:`Дата замовлення {{date}} минула.`,shoppingList:`Список покупок`,shoppingListItems_one:`(позицій: {{count}})`,shoppingListItems_other:`(позицій: {{count}})`,shoppingListEmpty:`Список покупок порожній. Натисніть значок кошика в будь-якому рядку, щоб додати позиції.`,addToCart:`Додати до списку покупок`,alertsSnoozed:`Вимкнути сповіщення для цього SKU`,alertsEnabled:`Увімкнути сповіщення для цього SKU`,addedToCart:`Додано до списку покупок`,failedAddItem:`Не вдалося додати елемент`,listView:`Список`,logisticsView:`Логістика`,qty:`Кількість`,weight:`Вага`,leadTime:`Строк постачання`,expectedRestock:`Очікуване поповнення запасів`,status:`Статус`,note:`Примітка`,pending:`В очікуванні`,purchased:`Придбано`,received:`Отримано`,markPurchased:`Позначити як придбане`,markReceived:`Позначити як отримане — додає котушки до запасу`,resetToPending:`Скинути до очікування`,remove:`Видалити`,clearAll:`Очистити все`,downloadCsv:`CSV`,addToCartTitle:`Додати до списку покупок`,byQuantity:`За кількістю`,byDuration:`За тривалістю`,numberOfSpools:`Кількість котушок`,lastHowManyDays:`Скільки днів має тривати?`,noUsageQty:`Немає даних про використання — кількість встановлено на 1.`,noteOptional:`Примітка (необов’язково)`,notePlaceholder:`напр. для проєкту X, терміново…`,addNSpools_one:`Додати котушки ({{count}})`,addNSpools_other:`Додати котушки ({{count}})`,onArrival:`Після прибуття`,stockBreakIn:`Запас вичерпається через {{days}} дн.`,stockRunsOutBefore:`Запас закінчиться раніше, ніж мине строк постачання {{lt}} дн.`,atRate:`За споживання {{rate}} г/день потрібно`,moreSpools_one:`Додаткових котушок: {{count}}`,moreSpools_other:`Додаткових котушок: {{count}}`,bridgeGap:`щоб покрити нестачу.`,noReadAccess:`Ви не маєте дозволу переглядати прогнози запасів.`,noWriteAccess:`Ви не маєте дозволу змінювати налаштування прогнозу.`}}}},Et=[`en`,`de`,`es`,`fr`,`ja`,`it`,`ko`,`nl`,`pt-BR`,`ru`,`sv`,`tr`,`uk`,`zh-CN`,`zh-TW`],Dt=`bambuddy_appliance_locale_consumed`;Oe.use(wt).use(qe).init({resources:Tt,fallbackLng:`en`,supportedLngs:Et,detection:{order:[`localStorage`,`navigator`,`htmlTag`],lookupLocalStorage:`bambutrack_language`,caches:[`localStorage`]},interpolation:{escapeValue:!1},react:{useSuspense:!1}});function Ot(){if(typeof window>`u`||!window.localStorage)return;let e=window.localStorage;typeof e.getItem!=`function`||typeof e.setItem!=`function`||e.getItem(Dt)||fetch(`/api/v1/system/appliance`).then(e=>e.ok?e.json():null).then(t=>{!t||typeof t.locale!=`string`||Et.includes(t.locale)&&(Oe.changeLanguage(t.locale),e.setItem(Dt,`1`))}).catch(()=>{})}Ot();var kt=[{code:`en`,name:`English`,nativeName:`English`},{code:`de`,name:`German`,nativeName:`Deutsch`},{code:`es`,name:`Spanish`,nativeName:`Español`},{code:`fr`,name:`French`,nativeName:`Français`},{code:`ja`,name:`Japanese`,nativeName:`日本語`},{code:`it`,name:`Italian`,nativeName:`Italiano`},{code:`ko`,name:`Korean`,nativeName:`한국어`},{code:`nl`,name:`Dutch`,nativeName:`Nederlands`},{code:`pt-BR`,name:`Portuguese (Brazil)`,nativeName:`Português (Brasil)`},{code:`zh-CN`,name:`Chinese (Simplified)`,nativeName:`简体中文`},{code:`zh-TW`,name:`Chinese (Traditional)`,nativeName:`繁體中文`},{code:`sv`,name:`Swedish`,nativeName:`Svenska`},{code:`tr`,name:`Turkish`,nativeName:`Türkçe`},{code:`ru`,name:`Russian`,nativeName:`Русский`},{code:`uk`,name:`Ukrainian`,nativeName:`Українська`}],At=l(g()),jt=`modulepreload`,Mt=function(e){return`/`+e},Nt={},Pt=function(e,t,n){let r=Promise.resolve();if(t&&t.length>0){let e=document.getElementsByTagName(`link`),i=document.querySelector(`meta[property=csp-nonce]`),a=i?.nonce||i?.getAttribute(`nonce`);function o(e){return Promise.all(e.map(e=>Promise.resolve(e).then(e=>({status:`fulfilled`,value:e}),e=>({status:`rejected`,reason:e}))))}r=o(t.map(t=>{if(t=Mt(t,n),t in Nt)return;Nt[t]=!0;let r=t.endsWith(`.css`),i=r?`[rel="stylesheet"]`:``;if(n)for(let n=e.length-1;n>=0;n--){let i=e[n];if(i.href===t&&(!r||i.rel===`stylesheet`))return}else if(document.querySelector(`link[href="${t}"]${i}`))return;let o=document.createElement(`link`);if(o.rel=r?`stylesheet`:jt,r||(o.as=`script`),o.crossOrigin=``,o.href=t,a&&o.setAttribute(`nonce`,a),document.head.appendChild(o),r)return new Promise((e,n)=>{o.addEventListener(`load`,e),o.addEventListener(`error`,()=>n(Error(`Unable to preload CSS for ${t}`)))})}))}function i(e){let t=new Event(`vite:preloadError`,{cancelable:!0});if(t.payload=e,window.dispatchEvent(t),!t.defaultPrevented)throw e}return r.then(t=>{for(let e of t||[])e.status===`rejected`&&i(e.reason);return e().catch(i)})},Ft=/^(?:[a-z][a-z0-9+.-]*:|[\\/]{2})/i,It=/^[\\/]{2}/;function Lt(e,t){return t+e.replace(/\\/g,`/`)}var Rt=`popstate`;function zt(e){return typeof e==`object`&&!!e&&`pathname`in e&&`search`in e&&`hash`in e&&`state`in e&&`key`in e}function Bt(e={}){function t(e,t){let n=t.state?.masked,{pathname:r,search:i,hash:a}=n||e.location;return Gt(``,{pathname:r,search:i,hash:a},t.state&&t.state.usr||null,t.state&&t.state.key||`default`,n?{pathname:e.location.pathname,search:e.location.search,hash:e.location.hash}:void 0)}function n(e,t){return typeof t==`string`?t:Kt(t)}return Jt(t,n,null,e)}function Vt(e,t){if(e===!1||e==null)throw Error(t)}function Ht(e,t){if(!e){typeof console<`u`&&console.warn(t);try{throw Error(t)}catch{}}}function Ut(){return Math.random().toString(36).substring(2,10)}function Wt(e,t){return{usr:e.state,key:e.key,idx:t,masked:e.mask?{pathname:e.pathname,search:e.search,hash:e.hash}:void 0}}function Gt(e,t,n=null,r,i){return{pathname:typeof e==`string`?e:e.pathname,search:``,hash:``,...typeof t==`string`?qt(t):t,state:n,key:t&&t.key||r||Ut(),mask:i}}function Kt({pathname:e=`/`,search:t=``,hash:n=``}){return t&&t!==`?`&&(e+=t.charAt(0)===`?`?t:`?`+t),n&&n!==`#`&&(e+=n.charAt(0)===`#`?n:`#`+n),e}function qt(e){let t={};if(e){let n=e.indexOf(`#`);n>=0&&(t.hash=e.substring(n),e=e.substring(0,n));let r=e.indexOf(`?`);r>=0&&(t.search=e.substring(r),e=e.substring(0,r)),e&&(t.pathname=e)}return t}function Jt(e,t,n,r={}){let{window:i=document.defaultView,v5Compat:a=!1}=r,o=i.history,s=`POP`,c=null,l=u();l??(l=0,o.replaceState({...o.state,idx:l},``));function u(){return(o.state||{idx:null}).idx}function d(){s=`POP`;let e=u(),t=e==null?null:e-l;l=e,c&&c({action:s,location:h.location,delta:t})}function f(e,t){s=`PUSH`;let r=zt(e)?e:Gt(h.location,e,t);n&&n(r,e),l=u()+1;let d=Wt(r,l),f=h.createHref(r.mask||r);try{o.pushState(d,``,f)}catch(e){if(e instanceof DOMException&&e.name===`DataCloneError`)throw e;i.location.assign(f)}a&&c&&c({action:s,location:h.location,delta:1})}function p(e,t){s=`REPLACE`;let r=zt(e)?e:Gt(h.location,e,t);n&&n(r,e),l=u();let i=Wt(r,l),d=h.createHref(r.mask||r);o.replaceState(i,``,d),a&&c&&c({action:s,location:h.location,delta:0})}function m(e){return Yt(i,e)}let h={get action(){return s},get location(){return e(i,o)},listen(e){if(c)throw Error(`A history only accepts one active listener`);return i.addEventListener(Rt,d),c=e,()=>{i.removeEventListener(Rt,d),c=null}},createHref(e){return t(i,e)},createURL:m,encodeLocation(e){let t=m(e);return{pathname:t.pathname,search:t.search,hash:t.hash}},push:f,replace:p,go(e){return o.go(e)}};return h}function Yt(e,t,n=!1){let r=`http://localhost`;e&&(r=e.location.origin===`null`?e.location.href:e.location.origin),Vt(r,`No window.location.(origin|href) available to create URL`);let i=typeof t==`string`?t:Kt(t);return i=i.replace(/ $/,`%20`),!n&&It.test(i)&&(i=r+i),new URL(i,r)}function Xt(e,t,n=`/`){return Zt(e,t,n,!1)}function Zt(e,t,n,r,i){let a=_n((typeof t==`string`?qt(t):t).pathname||`/`,n);if(a==null)return null;let o=i??$t(e),s=null,c=gn(a);for(let e=0;s==null&&e<o.length;++e)s=fn(o[e],c,r);return s}function Qt(e,t){let{route:n,pathname:r,params:i}=e;return{id:n.id,pathname:r,params:i,data:t[n.id],loaderData:t[n.id],handle:n.handle}}function $t(e){let t=en(e);return W(t),t}function en(e,t=[],n=[],r=``,i=!1){let a=(e,a,o=i,s)=>{let c={relativePath:s===void 0?e.path||``:s,caseSensitive:e.caseSensitive===!0,childrenIndex:a,route:e};if(c.relativePath.startsWith(`/`)){if(!c.relativePath.startsWith(r)&&o)return;Vt(c.relativePath.startsWith(r),`Absolute route path "${c.relativePath}" nested under path "${r}" is not valid. An absolute child route path must start with the combined path of all its parent routes.`),c.relativePath=c.relativePath.slice(r.length)}let l=Tn([r,c.relativePath]),u=n.concat(c);e.children&&e.children.length>0&&(Vt(e.index!==!0,`Index routes must not have child routes. Please remove all child routes from route path "${l}".`),en(e.children,t,u,l,o)),!(e.path==null&&!e.index)&&t.push({path:l,score:un(l,e.index),routesMeta:u.map((e,t)=>{let[n,r]=hn(e.relativePath,e.caseSensitive,t===u.length-1);return{...e,matcher:n,compiledParams:r}})})};return e.forEach((e,t)=>{if(e.path===``||!e.path?.includes(`?`))a(e,t);else for(let n of tn(e.path))a(e,t,!0,n)}),t}function tn(e){let t=e.split(`/`);if(t.length===0)return[];let[n,...r]=t,i=n.endsWith(`?`),a=n.replace(/\?$/,``);if(r.length===0)return i?[a,``]:[a];let o=tn(r.join(`/`)),s=[];return s.push(...o.map(e=>e===``?a:[a,e].join(`/`))),i&&s.push(...o),s.map(t=>e.startsWith(`/`)&&t===``?`/`:t)}function W(e){e.sort((e,t)=>e.score===t.score?dn(e.routesMeta.map(e=>e.childrenIndex),t.routesMeta.map(e=>e.childrenIndex)):t.score-e.score)}var nn=/^:[\w-]+$/,rn=3,an=2,on=1,sn=10,cn=-2,ln=e=>e===`*`;function un(e,t){let n=e.split(`/`),r=n.length;return n.some(ln)&&(r+=cn),t&&(r+=an),n.filter(e=>!ln(e)).reduce((e,t)=>e+(nn.test(t)?rn:t===``?on:sn),r)}function dn(e,t){return e.length===t.length&&e.slice(0,-1).every((e,n)=>e===t[n])?e[e.length-1]-t[t.length-1]:0}function fn(e,t,n=!1){let{routesMeta:r}=e,i={},a=`/`,o=[];for(let e=0;e<r.length;++e){let s=r[e],c=e===r.length-1,l=a===`/`?t:t.slice(a.length)||`/`,u={path:s.relativePath,caseSensitive:s.caseSensitive,end:c},d=s.matcher&&s.compiledParams?mn(u,l,s.matcher,s.compiledParams):pn(u,l),f=s.route;if(!d&&c&&n&&!r[r.length-1].route.index&&(d=pn({path:s.relativePath,caseSensitive:s.caseSensitive,end:!1},l)),!d)return null;Object.assign(i,d.params),o.push({params:i,pathname:Tn([a,d.pathname]),pathnameBase:Dn(Tn([a,d.pathnameBase])),route:f}),d.pathnameBase!==`/`&&(a=Tn([a,d.pathnameBase]))}return o}function pn(e,t){typeof e==`string`&&(e={path:e,caseSensitive:!1,end:!0});let[n,r]=hn(e.path,e.caseSensitive,e.end);return mn(e,t,n,r)}function mn(e,t,n,r){let i=t.match(n);if(!i)return null;let a=i[0],o=a.replace(/(.)\/+$/,`$1`),s=i.slice(1);return{params:r.reduce((e,{paramName:t,isOptional:n},r)=>{if(t===`*`){let e=s[r]||``;o=a.slice(0,a.length-e.length).replace(/(.)\/+$/,`$1`)}let i=s[r];return n&&!i?e[t]=void 0:e[t]=(i||``).replace(/%2F/g,`/`),e},{}),pathname:a,pathnameBase:o,pattern:e}}function hn(e,t=!1,n=!0){Ht(e===`*`||!e.endsWith(`*`)||e.endsWith(`/*`),`Route path "${e}" will be treated as if it were "${e.replace(/\*$/,`/*`)}" because the \`*\` character must always follow a \`/\` in the pattern. To get rid of this warning, please change the route path to "${e.replace(/\*$/,`/*`)}".`);let r=[],i=`^`+e.replace(/\/*\*?$/,``).replace(/^\/*/,`/`).replace(/[\\.*+^${}|()[\]]/g,`\\$&`).replace(/\/:([\w-]+)(\?)?/g,(e,t,n,i,a)=>{if(r.push({paramName:t,isOptional:n!=null}),n){let t=a.charAt(i+e.length);return t&&t!==`/`?`/([^\\/]*)`:`(?:/([^\\/]*))?`}return`/([^\\/]+)`}).replace(/\/([\w-]+)\?(\/|$)/g,`(/$1)?$2`);return e.endsWith(`*`)?(r.push({paramName:`*`}),i+=e===`*`||e===`/*`?`(.*)$`:`(?:\\/(.+)|\\/*)$`):n?i+=`\\/*$`:e!==``&&e!==`/`&&(i+=`(?:(?=\\/|$))`),[new RegExp(i,t?void 0:`i`),r]}function gn(e){try{return e.split(`/`).map(e=>decodeURIComponent(e).replace(/\//g,`%2F`)).join(`/`)}catch(t){return Ht(!1,`The URL path "${e}" could not be decoded because it is a malformed URL segment. This is probably due to a bad percent encoding (${t}).`),e}}function _n(e,t){if(t===`/`)return e;if(!e.toLowerCase().startsWith(t.toLowerCase()))return null;let n=t.endsWith(`/`)?t.length-1:t.length,r=e.charAt(n);return r&&r!==`/`?null:e.slice(n)||`/`}function vn(e,t=`/`){let{pathname:n,search:r=``,hash:i=``}=typeof e==`string`?qt(e):e,a;return n?(n=wn(n),a=n.startsWith(`/`)?yn(n.substring(1),`/`):yn(n,t)):a=t,{pathname:a,search:On(r),hash:kn(i)}}function yn(e,t){let n=En(t).split(`/`);return e.split(`/`).forEach(e=>{e===`..`?n.length>1&&n.pop():e!==`.`&&n.push(e)}),n.length>1?n.join(`/`):`/`}function bn(e,t,n,r){return`Cannot include a '${e}' character in a manually specified \`to.${t}\` field [${JSON.stringify(r)}].  Please separate it out to the \`to.${n}\` field. Alternatively you may provide the full path as a string in <Link to="..."> and the router will parse it for you.`}function xn(e){return e.filter((e,t)=>t===0||e.route.path&&e.route.path.length>0)}function Sn(e){let t=xn(e);return t.map((e,n)=>n===t.length-1?e.pathname:e.pathnameBase)}function Cn(e,t,n,r=!1){let i;typeof e==`string`?i=qt(e):(i={...e},Vt(!i.pathname||!i.pathname.includes(`?`),bn(`?`,`pathname`,`search`,i)),Vt(!i.pathname||!i.pathname.includes(`#`),bn(`#`,`pathname`,`hash`,i)),Vt(!i.search||!i.search.includes(`#`),bn(`#`,`search`,`hash`,i)));let a=e===``||i.pathname===``,o=a?`/`:i.pathname,s;if(o==null)s=n;else{let e=t.length-1;if(!r&&o.startsWith(`..`)){let t=o.split(`/`);for(;t[0]===`..`;)t.shift(),--e;i.pathname=t.join(`/`)}s=e>=0?t[e]:`/`}let c=vn(i,s),l=o&&o!==`/`&&o.endsWith(`/`),u=(a||o===`.`)&&n.endsWith(`/`);return!c.pathname.endsWith(`/`)&&(l||u)&&(c.pathname+=`/`),c}var wn=e=>e.replace(/[\\/]{2,}/g,`/`),Tn=e=>wn(e.join(`/`)),En=e=>e.replace(/\/+$/,``),Dn=e=>En(e).replace(/^\/*/,`/`),On=e=>!e||e===`?`?``:e.startsWith(`?`)?e:`?`+e,kn=e=>!e||e===`#`?``:e.startsWith(`#`)?e:`#`+e,An=class{constructor(e,t,n,r=!1){this.status=e,this.statusText=t||``,this.internal=r,n instanceof Error?(this.data=n.toString(),this.error=n):this.data=n}};function jn(e){return e!=null&&typeof e.status==`number`&&typeof e.statusText==`string`&&typeof e.internal==`boolean`&&`data`in e}function Mn(e){return Tn(e.map(e=>e.route.path).filter(Boolean))||`/`}var Nn=typeof window<`u`&&window.document!==void 0&&window.document.createElement!==void 0;function Pn(e,t){let n=e;if(typeof n!=`string`||!Ft.test(n))return{absoluteURL:void 0,isExternal:!1,to:n};let r=n,i=!1;if(Nn)try{let e=new URL(window.location.href),r=It.test(n)?new URL(Lt(n,e.protocol)):new URL(n),a=_n(r.pathname,t);r.origin===e.origin&&a!=null?n=a+r.search+r.hash:i=!0}catch{Ht(!1,`<Link to="${n}"> contains an invalid URL which will probably break when clicked - please update to a valid URL path.`)}return{absoluteURL:r,isExternal:i,to:n}}Object.getOwnPropertyNames(Object.prototype).sort().join(`\0`);var Fn=[`POST`,`PUT`,`PATCH`,`DELETE`];new Set(Fn);var In=[`GET`,...Fn];new Set(In);var Ln=[`about:`,`blob:`,`chrome:`,`chrome-untrusted:`,`content:`,`data:`,`devtools:`,`file:`,`filesystem:`,`javascript:`];function Rn(e){try{return Ln.includes(new URL(e).protocol)}catch{return!1}}var zn=y.createContext(null);zn.displayName=`DataRouter`;var Bn=y.createContext(null);Bn.displayName=`DataRouterState`;var Vn=y.createContext(!1);function Hn(){return y.useContext(Vn)}var Un=y.createContext({isTransitioning:!1});Un.displayName=`ViewTransition`;var Wn=y.createContext(new Map);Wn.displayName=`Fetchers`;var Gn=y.createContext(null);Gn.displayName=`Await`;var Kn=y.createContext(null);Kn.displayName=`Navigation`;var qn=y.createContext(null);qn.displayName=`Location`;var Jn=y.createContext({outlet:null,matches:[],isDataRoute:!1});Jn.displayName=`Route`;var Yn=y.createContext(null);Yn.displayName=`RouteError`;var Xn=`REACT_ROUTER_ERROR`,Zn=`REDIRECT`,Qn=`ROUTE_ERROR_RESPONSE`;function $n(e){if(e.startsWith(`${Xn}:${Zn}:{`))try{let t=JSON.parse(e.slice(28));if(typeof t==`object`&&t&&typeof t.status==`number`&&typeof t.statusText==`string`&&typeof t.location==`string`&&typeof t.reloadDocument==`boolean`&&typeof t.replace==`boolean`)return t}catch{}}function er(e){if(e.startsWith(`${Xn}:${Qn}:{`))try{let t=JSON.parse(e.slice(40));if(typeof t==`object`&&t&&typeof t.status==`number`&&typeof t.statusText==`string`)return new An(t.status,t.statusText,t.data)}catch{}}function tr(e,{relative:t}={}){Vt(nr(),`useHref() may be used only in the context of a <Router> component.`);let{basename:n,navigator:r}=y.useContext(Kn),{hash:i,pathname:a,search:o}=fr(e,{relative:t}),s=a;return n!==`/`&&(s=a===`/`?n:Tn([n,a])),r.createHref({pathname:s,search:o,hash:i})}function nr(){return y.useContext(qn)!=null}function rr(){return Vt(nr(),`useLocation() may be used only in the context of a <Router> component.`),y.useContext(qn).location}var ir=`You should call navigate() in a React.useEffect(), not when your component is first rendered.`;function ar(e){y.useContext(Kn).static||y.useLayoutEffect(e)}function or(){let{isDataRoute:e}=y.useContext(Jn);return e?jr():sr()}function sr(){Vt(nr(),`useNavigate() may be used only in the context of a <Router> component.`);let e=y.useContext(zn),{basename:t,navigator:n}=y.useContext(Kn),{matches:r}=y.useContext(Jn),{pathname:i}=rr(),a=JSON.stringify(Sn(r)),o=y.useRef(!1);return ar(()=>{o.current=!0}),y.useCallback((r,s={})=>{if(Ht(o.current,ir),!o.current)return;if(typeof r==`number`){n.go(r);return}let c=Cn(r,JSON.parse(a),i,s.relative===`path`);e==null&&t!==`/`&&(c.pathname=c.pathname===`/`?t:Tn([t,c.pathname])),(s.replace?n.replace:n.push)(c,s.state,s)},[t,n,a,i,e])}var cr=y.createContext(null);function lr(){return y.useContext(cr)}function ur(e){let t=y.useContext(Jn).outlet;return y.useMemo(()=>t&&y.createElement(cr.Provider,{value:e},t),[t,e])}function dr(){let{matches:e}=y.useContext(Jn);return e[e.length-1]?.params??{}}function fr(e,{relative:t}={}){let{matches:n}=y.useContext(Jn),{pathname:r}=rr(),i=JSON.stringify(Sn(n));return y.useMemo(()=>Cn(e,JSON.parse(i),r,t===`path`),[e,i,r,t])}function pr(e,t){return mr(e,t)}function mr(e,t,n){Vt(nr(),`useRoutes() may be used only in the context of a <Router> component.`);let{navigator:r}=y.useContext(Kn),{matches:i}=y.useContext(Jn),a=i[i.length-1],o=a?a.params:{},s=a?a.pathname:`/`,c=a?a.pathnameBase:`/`,l=a&&a.route;{let e=l&&l.path||``;Nr(s,!l||e.endsWith(`*`)||e.endsWith(`*?`),`You rendered descendant <Routes> (or called \`useRoutes()\`) at "${s}" (under <Route path="${e}">) but the parent route path has no trailing "*". This means if you navigate deeper, the parent won't match anymore and therefore the child routes will never render.
@@ -4183,8 +4183,8 @@ void main() {
             border-l-[5px] border-l-transparent
             border-r-[5px] border-r-transparent
             border-t-[5px] border-t-bambu-dark-tertiary
-          `})]}),document.body)]})}function EU({isOpen:e,onClose:t,tagUid:n,trayUuid:r,printerId:i,amsId:a,trayId:o}){let{t:s}=U(),c=co(),{showToast:l}=Gd(),[u,d]=(0,y.useState)(``),f=r||n,{data:p,isLoading:m}=K({queryKey:[`unlinked-spools`],queryFn:Z.getUnlinkedSpools,enabled:e}),h=(0,y.useMemo)(()=>p?p.filter(e=>{if(!u)return!0;let t=u.toLowerCase();return e.filament_name&&e.filament_name.toLowerCase().includes(t)||e.filament_vendor&&e.filament_vendor.toLowerCase().includes(t)||e.filament_material&&e.filament_material.toLowerCase().includes(t)||String(e.id).includes(t)}):[],[p,u]),g=q({mutationFn:e=>Z.linkSpool(e,{spoolTag:f,printerId:i,amsId:a,trayId:o}),onSuccess:()=>{c.invalidateQueries({queryKey:[`unlinked-spools`]}),c.invalidateQueries({queryKey:[`linked-spools`]}),c.invalidateQueries({queryKey:[`spoolman-slot-assignments`]}),l(s(`spoolman.linkSuccess`),`success`),t()},onError:e=>{l(e.message||s(`spoolman.linkFailed`),`error`)}});return e?(0,G.jsxs)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60 backdrop-blur-sm`,onClick:t}),(0,G.jsxs)(`div`,{className:`relative bg-bambu-dark-secondary rounded-xl shadow-xl w-full max-w-md mx-4 max-h-[80vh] flex flex-col border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-white/10`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h3`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Xc,{className:`w-5 h-5 text-bambu-green`}),s(`spoolman.selectSpool`)]}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:[`AMS `,a,` T`,o,` · Printer #`,i]})]}),(0,G.jsx)(`button`,{onClick:t,className:`p-1 text-bambu-gray hover:text-white rounded transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 border-b border-white/10`,children:[(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:u,onChange:e=>d(e.target.value),placeholder:s(`inventory.searchSpools`),className:`w-full pl-9 pr-3 py-2 bg-bambu-dark rounded-lg border border-white/10 text-white text-sm placeholder:text-bambu-gray focus:outline-none focus:border-bambu-green`})]}),(r||n)&&(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-2 font-mono truncate`,title:r||n,children:[`Tag: `,r||n]})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto p-2 min-h-0`,children:m?(0,G.jsx)(`div`,{className:`flex justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin text-bambu-green`})}):h.length===0?(0,G.jsx)(`p`,{className:`text-center text-bambu-gray py-8 text-sm`,children:s(`inventory.noSpoolsMatch`)}):h.map(e=>(0,G.jsxs)(`button`,{onClick:()=>g.mutate(e.id),disabled:g.isPending||!f,className:`w-full flex items-center gap-3 p-3 rounded-lg hover:bg-white/5 transition-colors text-left`,children:[(0,G.jsx)(`span`,{className:`w-6 h-6 rounded-full border border-black/20 flex-shrink-0`,style:kf(e.filament_color_hex)}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-sm text-white font-medium truncate`,children:e.filament_name||s(`spoolman.spoolId`)}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray truncate`,children:[e.filament_vendor?`${e.filament_vendor} · `:``,e.filament_material||`Unknown`,` · #`,e.id]})]}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:e.remaining_weight==null?`—`:`${Math.round(e.remaining_weight)}g`})]},e.id))}),(0,G.jsx)(`div`,{className:`p-4 border-t border-white/10 flex justify-end`,children:(0,G.jsx)(Q,{variant:`ghost`,onClick:t,children:s(`inventory.cancel`)||`Cancel`})})]})]}):null}function nOe(e,t){if(!t)return!0;let n=t.toLowerCase();return String(e.id).includes(n)||e.material.toLowerCase().includes(n)||(e.brand?.toLowerCase().includes(n)??!1)||(e.color_name?.toLowerCase().includes(n)??!1)||(Ef(e.color_name,e.rgba,e.color_name_is_synthesized)?.toLowerCase().includes(n)??!1)||(e.subtype?.toLowerCase().includes(n)??!1)||(e.note?.toLowerCase().includes(n)??!1)||(e.slicer_filament_name?.toLowerCase().includes(n)??!1)||(e.storage_location?.toLowerCase().includes(n)??!1)}function DU(e,t){return t?e.filter(e=>nOe(e,t)):e}function OU({isOpen:e,onClose:t,printerId:n,amsId:r,trayId:i,trayInfo:a,spoolmanEnabled:o}){let{t:s}=U(),c=co(),{showToast:l}=Gd(),[u,d]=(0,y.useState)(!1),[f,p]=(0,y.useState)(null),[m,h]=(0,y.useState)(null);(0,y.useEffect)(()=>{p(null),h(null)},[u]);let[g,_]=(0,y.useState)(``),[v,b]=(0,y.useState)(null),[x,S]=(0,y.useState)(!1),[C,w]=(0,y.useState)(null);(0,y.useEffect)(()=>{e&&d(!1)},[e]);let{data:T,isLoading:E}=K({queryKey:[`inventory-spools`,`assign-modal`],queryFn:()=>Z.getSpools(!0),enabled:e&&!o}),{data:D}=K({queryKey:[`spool-assignments`],queryFn:()=>Z.getAssignments(),enabled:e}),{data:O}=K({queryKey:[`settings`],queryFn:()=>Z.getSettings(),enabled:e}),{data:k,isLoading:A}=K({queryKey:[`spoolman-inventory-spools`,`assign-modal`],queryFn:()=>Z.getSpoolmanInventorySpools(!1),enabled:e&&!!o}),{data:j}=K({queryKey:[`spoolman-slot-assignments-all`],queryFn:()=>Z.getSpoolmanSlotAssignments(),enabled:e&&!!o}),M=(0,y.useMemo)(()=>j?new Set(j.filter(e=>!(e.printer_id===n&&e.ams_id===r&&e.tray_id===i)).map(e=>e.spoolman_spool_id)):new Set,[j,n,r,i]),N=()=>{Z.refreshPrinterStatus(n).catch(()=>{}),c.invalidateQueries({queryKey:[`printerStatus`,n]})},P=q({mutationFn:e=>Z.assignSpool({spool_id:e,printer_id:n,ams_id:r,tray_id:i}),onSuccess:e=>{c.setQueryData([`spool-assignments`],t=>{let a=(t||[]).filter(e=>!(e.printer_id===n&&e.ams_id===r&&e.tray_id===i));return a.push(e),a}),c.invalidateQueries({queryKey:[`spool-assignments`]}),N(),l(s(e.pending_config?`inventory.assignPendingInsert`:`inventory.assignSuccess`),`success`),S(!1),b(null),w(null),t()},onError:e=>{l(`${s(`inventory.assignFailed`)}: ${e.message}`,`error`)}}),F=q({mutationFn:e=>Z.assignSpoolmanSlot({spoolman_spool_id:e,printer_id:n,ams_id:r,tray_id:i}),onSuccess:()=>{c.invalidateQueries({queryKey:[`spoolman-inventory-spools`]}),c.invalidateQueries({queryKey:[`spoolman-slot-assignments`]}),N(),l(s(`inventory.assignSuccess`),`success`),t()},onError:e=>{l(`${s(`inventory.assignFailed`)}: ${e.message}`,`error`)}}),I=e=>(e??``).trim().toUpperCase(),L=(e,t)=>{let n=I(e),r=I(t);return!n||!r?`none`:n===r?`exact`:r.includes(n)||n.includes(r)?`partial`:`none`},R=e=>e.split(`@`)[0].trim(),z=(e,t)=>{let n=R(I(e)),r=R(I(t));return!n||!r?!1:n===r};if(!e)return null;let B=new Set((D||[]).filter(e=>!(e.printer_id===n&&e.ams_id===r&&e.tray_id===i)).map(e=>e.spool_id)),V=T?.filter(e=>!e.archived_at&&(u||!B.has(e.id))),ee=V;if(!u){let e=R(I(a?.profile)),t=I(a?.material||a?.type);(e||t)&&(ee=ee?.filter(n=>{let r=R(I(n.slicer_filament_name||n.slicer_filament)),i=I(n.material);return e&&r&&r===e?!0:t&&i?i===t||t.includes(i)||i.includes(t):!r&&!i}))}g&&ee&&(ee=DU(ee,g));let te=()=>{if(m!==null){F.mutate(m);return}if(!f)return;let e=T?.find(e=>e.id===f);if(!e){l(s(`inventory.assignFailed`),`error`);return}if(!O?.disable_filament_warnings&&a){let t=a.material||a.type,n=L(e.material,t),r=e.slicer_filament_name||e.slicer_filament,i=a.profile||a.type,o=z(r,i);if(n!==`exact`){let a;a=n===`none`&&!o?`material_profile`:n===`partial`&&!o?`partial_profile`:n===`none`?`material`:`partial`,b(f),w({type:a,spoolMaterial:e.material||``,trayMaterial:t||``,spoolProfile:r||void 0,trayProfile:i||void 0}),S(!0);return}}P.mutate(f)},ne=()=>{v&&(P.mutate(v),S(!1),b(null))};return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`fixed inset-0 z-[100] flex items-start sm:items-center justify-center p-4 overflow-y-auto`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60 backdrop-blur-sm`,onClick:t}),(0,G.jsxs)(`div`,{className:`relative w-full max-w-2xl bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-2xl max-h-[90vh] overflow-hidden flex flex-col my-auto`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Sl,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:s(`inventory.assignSpool`)})]}),(0,G.jsx)(`button`,{onClick:t,className:`p-1 text-bambu-gray hover:text-white rounded transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-4 overflow-y-auto`,children:[a&&(0,G.jsxs)(`div`,{className:`p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mb-1`,children:[s(`inventory.selectSpool`),`:`]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[a.color&&(0,G.jsx)(`span`,{className:`w-4 h-4 rounded-full border border-black/20`,style:kf(a.color)}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:a.type||s(`ams.emptySlot`)}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[`(`,a.location,`)`]})]})]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:g,onChange:e=>_(e.target.value),placeholder:s(`inventory.searchSpools`),className:`w-full pl-9 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray focus:outline-none focus:border-bambu-green`})]}),(0,G.jsxs)(`div`,{className:`space-y-3`,children:[!o&&(E?(0,G.jsx)(`div`,{className:`flex justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})}):ee&&ee.length>0?(0,G.jsx)(`div`,{className:`max-h-96 overflow-y-auto grid grid-cols-2 sm:grid-cols-3 gap-2`,children:ee.map(e=>(0,G.jsxs)(`button`,{onClick:()=>{p(e.id),h(null)},title:e.note||void 0,className:`p-2.5 rounded-lg border text-left transition-colors ${f===e.id?`bg-bambu-green/20 border-bambu-green`:`bg-bambu-dark border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:[(0,G.jsxs)(`p`,{className:`text-white text-sm font-medium truncate`,children:[e.brand?`${e.brand} `:``,e.material,e.subtype?` ${e.subtype}`:``]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 mt-1`,children:[e.rgba&&(0,G.jsx)(`span`,{className:`w-3 h-3 rounded-full border border-black/20 flex-shrink-0`,style:kf(e.rgba)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray truncate`,children:Ef(e.color_name,e.rgba,e.color_name_is_synthesized)||``})]}),e.label_weight&&(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:[Math.max(0,Math.round(e.label_weight-e.weight_used)),` / `,e.label_weight,`g`]}),e.note&&(0,G.jsx)(`p`,{className:`text-[10px] text-bambu-gray/70 mt-1 truncate`,title:e.note,children:e.note})]},e.id))}):V&&V.length===0?(0,G.jsxs)(`div`,{className:`text-center py-8 text-bambu-gray`,children:[(0,G.jsx)(`p`,{children:s(`inventory.noAvailableSpools`)}),T&&(0,G.jsxs)(`p`,{className:`text-[10px] mt-2 opacity-60`,children:[T.length,` fetched · `,T.filter(e=>e.archived_at).length,` archived ·`,` `,T.filter(e=>B.has(e.id)).length,` assigned to other slots`]})]}):(0,G.jsxs)(`div`,{className:`text-center py-8 text-bambu-gray`,children:[(0,G.jsx)(`p`,{children:s(`inventory.noSpoolsMatch`)}),V&&(0,G.jsxs)(`p`,{className:`text-[10px] mt-2 opacity-60`,children:[V.length,` unassigned spools — `,V.length-(ee?.length??0),` filtered by tray match. Try "Show all spools".`]})]})),o&&(0,G.jsx)(G.Fragment,{children:A?(0,G.jsx)(`div`,{className:`flex justify-center py-4`,children:(0,G.jsx)(Y,{className:`w-5 h-5 text-bambu-green animate-spin`})}):k&&k.filter(e=>!e.archived_at&&!M.has(e.id)).length>0?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`p`,{className:`text-xs font-medium text-bambu-gray uppercase tracking-wide pt-1`,children:s(`inventory.spoolmanSpools`)}),(0,G.jsx)(`div`,{className:`max-h-64 overflow-y-auto grid grid-cols-2 sm:grid-cols-3 gap-2`,children:DU(k.filter(e=>!e.archived_at&&!M.has(e.id)),g).map(e=>(0,G.jsxs)(`button`,{onClick:()=>{h(e.id),p(null)},title:e.note||void 0,className:`p-2.5 rounded-lg border text-left transition-colors ${m===e.id?`bg-bambu-green/20 border-bambu-green`:`bg-bambu-dark border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:[(0,G.jsxs)(`p`,{className:`text-white text-sm font-medium truncate`,children:[e.brand?`${e.brand} `:``,e.material,e.subtype?` ${e.subtype}`:``]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 mt-1`,children:[e.rgba&&(0,G.jsx)(`span`,{className:`w-3 h-3 rounded-full border border-black/20 flex-shrink-0`,style:kf(e.rgba)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray truncate`,children:Ef(e.color_name,e.rgba,e.color_name_is_synthesized)||``})]}),e.label_weight&&(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:[Math.max(0,Math.round(e.label_weight-e.weight_used)),` / `,e.label_weight,`g`]}),e.note&&(0,G.jsx)(`p`,{className:`text-[10px] text-bambu-gray/70 mt-1 truncate`,title:e.note,children:e.note})]},`spoolman-${e.id}`))})]}):null})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-between items-center p-4 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{id:`disable-filtering-toggle`,type:`checkbox`,checked:u,onChange:()=>d(e=>!e),className:`accent-bambu-green w-4 h-4 rounded focus:ring-0 border-bambu-dark-tertiary`}),(0,G.jsx)(`label`,{htmlFor:`disable-filtering-toggle`,className:`text-xs text-bambu-gray select-none cursor-pointer`,children:s(`inventory.showAllSpools`)})]}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:t,children:s(`common.cancel`)}),(0,G.jsx)(Q,{onClick:te,disabled:!f&&m===null||P.isPending||F.isPending,children:P.isPending||F.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),s(`inventory.assigning`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Sl,{className:`w-4 h-4`}),s(`inventory.assignSpool`)]})})]})]}),P.isError&&(0,G.jsx)(`div`,{className:`mx-4 mb-4 p-2 bg-red-100 dark:bg-red-500/20 border border-red-300 dark:border-red-500/50 rounded text-sm text-red-700 dark:text-red-400`,children:P.error.message})]})]}),x&&a&&f&&C&&(()=>{let e=``;return C.type===`material`?e=s(`inventory.assignMismatchMessage`,{spoolMaterial:C.spoolMaterial,trayMaterial:C.trayMaterial,location:a.location}):C.type===`partial`?e=s(`inventory.assignPartialMismatchMessage`,{spoolMaterial:C.spoolMaterial,trayMaterial:C.trayMaterial,location:a.location}):C.type===`material_profile`?e=`${s(`inventory.assignMismatchMessage`,{spoolMaterial:C.spoolMaterial,trayMaterial:C.trayMaterial,location:a.location})}\n\n${s(`inventory.assignProfileMismatchMessage`,{spoolProfile:C.spoolProfile||s(`common.unknown`),trayProfile:C.trayProfile||s(`common.unknown`),location:a.location})}`:C.type===`partial_profile`&&(e=`${s(`inventory.assignPartialMismatchMessage`,{spoolMaterial:C.spoolMaterial,trayMaterial:C.trayMaterial,location:a.location})}\n\n${s(`inventory.assignProfileMismatchMessage`,{spoolProfile:C.spoolProfile||s(`common.unknown`),trayProfile:C.trayProfile||s(`common.unknown`),location:a.location})}`),e=`${e}\n\n${s(`inventory.assignReconfigureNote`)}`,(0,G.jsx)(rf,{title:s(`inventory.assignMismatchTitle`),message:e,confirmText:s(`inventory.assignMismatchConfirm`),variant:`warning`,overlayZIndex:`z-[110]`,isLoading:P.isPending,onConfirm:ne,onCancel:()=>{P.isPending||(S(!1),b(null),w(null))}})})()]})}var rOe={bambuModelByShortCode:{}},kU={"A1 MINI":[`A1M`],"H2D PRO":[`H2DP`]};function AU(e,t){let n=e.toUpperCase(),r=t.toUpperCase();if(n===r)return!0;let i=kU[r];if(i&&i.includes(n))return!0;let a=kU[n];return!!(a&&a.includes(r))}function iOe(e){let t={};for(let[n,r]of Object.entries(e))r in t||(t[r]=n.replace(/^Bambu Lab\s+/,``));return t}function jU(e={}){return{bambuModelByShortCode:iOe(e)}}function MU(e){return e.replace(/\s+/g,``).toLowerCase()}function NU(e){return e.replace(/^#\s*/,``).trim()}var aOe=`0.4`;function PU(e){let t=e.match(/^(.*?)\s+([\d.]+)\s*nozzle\s*$/i);return t?{stripped:t[1].trim(),nozzle:t[2]}:{stripped:e.trim(),nozzle:null}}function oOe(e){let t=e.indexOf(`@BBL `);if(t<0)return null;let{stripped:n,nozzle:r}=PU(e.slice(t+5).trim());return n?{token:n,nozzle:r}:null}function FU(e){let t=NU(e).match(/^Bambu Lab\s+(.+)$/i);if(!t)return null;let{stripped:n,nozzle:r}=PU(t[1]);return n?{model:n,nozzle:r}:null}function sOe(e){return e.replace(/\s*\([^)]*\)\s*$/,``).trim()}var cOe=.1,lOe=2;function IU(e,t){let n=Number.parseFloat(e),r=Number.parseFloat(t);return Number.isNaN(n)||Number.isNaN(r)?!1:n===r}function uOe(e){let t=sOe(e),n=oOe(t);if(n)return n;let r=t.lastIndexOf(`@`);if(r<0)return null;let i=t.slice(r+1).trim(),a=FU(i);if(a)return{token:a.model,nozzle:a.nozzle};let o=i.match(/^([\d.]+)\s*(?:mm)?\s*(?:nozzle)?$/i);if(o){let e=Number.parseFloat(o[1]);if(!Number.isNaN(e)&&e>=cOe&&e<=lOe)return{token:null,nozzle:o[1]}}return null}function dOe(e,t,n){let r=uOe(e);if(!r)return`unknown`;let i=FU(t);if(!i)return`unknown`;if(r.token===null)return i.nozzle!==null&&r.nozzle!==null&&!IU(r.nozzle,i.nozzle)?`mismatch`:`unknown`;let a=n[r.token]??r.token;return MU(i.model)!==MU(a)&&!AU(r.token,i.model)||i.nozzle!==null&&!IU(r.nozzle??aOe,i.nozzle)?`mismatch`:`match`}function LU(e,t,n,r){if(!n)return`unknown`;let i=e.compatible_printers;if(i&&i.length>0){let e=NU(n);return i.some(t=>NU(t)===e)?`match`:`mismatch`}return dOe(e.name,n,r.bambuModelByShortCode)}function fOe(e){let t=e.replace(/[.*+?^${}()|[\]\\]/g,`\\$&`).replace(/\s+/g,`\\s+`);return RegExp(`\\b${t}\\b`,`i`)}function RU(e,t){let n=e.indexOf(`@`);if(n>=0){let r=e.slice(n+1).trim(),i=r.match(/^BBL\s+(.+?)(?:\s+[\d.]+\s*nozzle)?$/i);if(i)return i[1].trim();let a=r.match(/^Bambu Lab\s+(.+?)(?:\s+[\d.]+\s*nozzle)?$/i);if(a){let e=a[1].trim(),n=`Bambu Lab ${e}`;if(t[n])return t[n];let r=n.toLowerCase();for(let[e,n]of Object.entries(t))if(e.toLowerCase()===r)return n;return e}}let r=[],i=new Set;for(let[e,n]of Object.entries(t)){let t=e.replace(/^Bambu Lab\s+/,``),a=t.toLowerCase();i.has(a)||(r.push({token:t,short:n}),i.add(a));let o=n.toLowerCase();i.has(o)||(r.push({token:n,short:n}),i.add(o))}r.sort((e,t)=>t.token.length-e.token.length);for(let{token:t,short:n}of r)if(fOe(t).test(e))return n;return null}var zU=[`PLA`,`PETG`,`ABS`,`TPU`,`ASA`,`PC`,`PA`,`PVA`,`HIPS`,`PA-CF`,`PETG-CF`,`PLA-CF`],BU=[`Bambu`,`PolyLite`,`PolyTerra`,`eSUN`,`Overture`,`Fiberon`,`SUNLU`,`Inland`,`Hatchbox`,`Generic`],VU=`Basic.Matte.Silk.Silk+.Tough.Tough+.HF.High Flow.Engineering.CF.GF.Galaxy.Glow.Marble.Metal.Rainbow.Sparkle.Wood.Translucent.Transparent.Clear.Lite.Pro.Plus.Max.Super.Ultra.Flex.Soft.Hard.Strong.Impact.Heat Resistant.UV Resistant.ESD.Conductive.Magnetic.Gradient.Dual Color.Tri Color.Multicolor`.split(`.`),HU=[{name:`Black`,hex:`000000`},{name:`White`,hex:`FFFFFF`},{name:`Gray`,hex:`808080`},{name:`Red`,hex:`FF0000`},{name:`Orange`,hex:`FFA500`},{name:`Yellow`,hex:`FFFF00`},{name:`Green`,hex:`00AE42`},{name:`Blue`,hex:`0066FF`},{name:`Purple`,hex:`8B00FF`},{name:`Pink`,hex:`FF69B4`},{name:`Brown`,hex:`8B4513`},{name:`Silver`,hex:`C0C0C0`},{name:`Clear`,hex:`00000000`}],pOe=[{name:`Dark Red`,hex:`8B0000`},{name:`Crimson`,hex:`DC143C`},{name:`Coral`,hex:`FF7F50`},{name:`Salmon`,hex:`FA8072`},{name:`Dark Orange`,hex:`FF8C00`},{name:`Peach`,hex:`FFDAB9`},{name:`Gold`,hex:`FFD700`},{name:`Khaki`,hex:`F0E68C`},{name:`Lemon`,hex:`FFF44F`},{name:`Lime`,hex:`32CD32`},{name:`Forest Green`,hex:`228B22`},{name:`Olive`,hex:`808000`},{name:`Mint`,hex:`98FF98`},{name:`Teal`,hex:`008080`},{name:`Navy`,hex:`000080`},{name:`Sky Blue`,hex:`87CEEB`},{name:`Royal Blue`,hex:`4169E1`},{name:`Cyan`,hex:`00FFFF`},{name:`Turquoise`,hex:`40E0D0`},{name:`Violet`,hex:`EE82EE`},{name:`Magenta`,hex:`FF00FF`},{name:`Indigo`,hex:`4B0082`},{name:`Lavender`,hex:`E6E6FA`},{name:`Plum`,hex:`DDA0DD`},{name:`Hot Pink`,hex:`FF69B4`},{name:`Rose`,hex:`FF007F`},{name:`Blush`,hex:`FFB6C1`},{name:`Chocolate`,hex:`D2691E`},{name:`Tan`,hex:`D2B48C`},{name:`Beige`,hex:`F5F5DC`},{name:`Maroon`,hex:`800000`},{name:`Dark Gray`,hex:`404040`},{name:`Light Gray`,hex:`D3D3D3`},{name:`Charcoal`,hex:`36454F`},{name:`Ivory`,hex:`FFFFF0`},{name:`Bambu Green`,hex:`00AE42`},{name:`Jade White`,hex:`E8E8E8`},{name:`Titan Gray`,hex:`5A5A5A`}],UU=[...HU,...pOe],WU=`bambuddy-recent-colors`,GU=[`0.2`,`0.4`,`0.6`,`0.8`];async function KU(e,t){let n=Bp(t),r=Array.from(new Set([...GU,...n])),i=[];for(let t of r)i.push(await Z.getKProfiles(e,t).catch(()=>null));let a=[];for(let e of i)if(e)for(let t of e.profiles)a.push({cali_idx:t.slot_id,filament_id:t.filament_id,setting_id:t.setting_id||``,name:t.name,k_value:parseFloat(t.k_value)||0,n_coef:parseFloat(t.n_coef)||0,extruder_id:t.extruder_id,nozzle_diameter:t.nozzle_diameter,nozzle_id:t.nozzle_id});return a}var mOe=[{code:`GFL00`,name:`Bambu PLA Basic`,displayName:`Bambu PLA Basic`,isCustom:!1,allCodes:[`GFL00`],source:`builtin`},{code:`GFL01`,name:`Bambu PLA Matte`,displayName:`Bambu PLA Matte`,isCustom:!1,allCodes:[`GFL01`],source:`builtin`},{code:`GFL05`,name:`Generic PLA`,displayName:`Generic PLA`,isCustom:!1,allCodes:[`GFL05`],source:`builtin`},{code:`GFG00`,name:`Bambu PETG Basic`,displayName:`Bambu PETG Basic`,isCustom:!1,allCodes:[`GFG00`],source:`builtin`},{code:`GFG05`,name:`Generic PETG`,displayName:`Generic PETG`,isCustom:!1,allCodes:[`GFG05`],source:`builtin`},{code:`GFB00`,name:`Bambu ABS Basic`,displayName:`Bambu ABS Basic`,isCustom:!1,allCodes:[`GFB00`],source:`builtin`},{code:`GFB05`,name:`Generic ABS`,displayName:`Generic ABS`,isCustom:!1,allCodes:[`GFB05`],source:`builtin`},{code:`GFA00`,name:`Bambu ASA Basic`,displayName:`Bambu ASA Basic`,isCustom:!1,allCodes:[`GFA00`],source:`builtin`},{code:`GFU00`,name:`Bambu TPU 95A`,displayName:`Bambu TPU 95A`,isCustom:!1,allCodes:[`GFU00`],source:`builtin`},{code:`GFU05`,name:`Generic TPU`,displayName:`Generic TPU`,isCustom:!1,allCodes:[`GFU05`],source:`builtin`},{code:`GFC00`,name:`Bambu PC Basic`,displayName:`Bambu PC Basic`,isCustom:!1,allCodes:[`GFC00`],source:`builtin`},{code:`GFN00`,name:`Bambu PA Basic`,displayName:`Bambu PA Basic`,isCustom:!1,allCodes:[`GFN00`],source:`builtin`},{code:`GFN05`,name:`Generic PA`,displayName:`Generic PA`,isCustom:!1,allCodes:[`GFN05`],source:`builtin`},{code:`GFS00`,name:`Bambu PLA-CF`,displayName:`Bambu PLA-CF`,isCustom:!1,allCodes:[`GFS00`],source:`builtin`},{code:`GFT00`,name:`Bambu PETG-CF`,displayName:`Bambu PETG-CF`,isCustom:!1,allCodes:[`GFT00`],source:`builtin`},{code:`GFNC0`,name:`Bambu PA-CF`,displayName:`Bambu PA-CF`,isCustom:!1,allCodes:[`GFNC0`],source:`builtin`},{code:`GFV00`,name:`Bambu PVA`,displayName:`Bambu PVA`,isCustom:!1,allCodes:[`GFV00`],source:`builtin`}];function qU(e){let t=e.replace(/@.*$/,``).trim();t=t.replace(/\(Custom\)/i,``).trim(),t=t.replace(/^[#*]+\s*/,``).trim();let n=`PLA-CF.PETG-CF.ABS-GF.ASA-CF.PA-CF.PAHT-CF.PA6-CF.PA6-GF.PPA-CF.PPA-GF.PET-CF.PPS-CF.PC-CF.PC-ABS.ABS-GF.PCTG.PETG.PLA.ABS.ASA.PC.PA.TPU.PVA.HIPS.BVOH.PPS.PEEK.PEI`.split(`.`),r=``,i=-1;for(let e of n){let n=t.toUpperCase().indexOf(e.toUpperCase());if(n!==-1){r=e,i=n;break}}let a=``;i>0&&(a=t.substring(0,i).trim(),a=a.replace(/[-_\s]+$/,``));let o=``;i!==-1&&r&&(o=t.substring(i+r.length).trim(),o=o.replace(/^[-_\s]+/,``));let s=``;for(let e of VU)if(o.toLowerCase().includes(e.toLowerCase())){s=e;break}if(!s&&a)for(let e of VU){let t=RegExp(`\\s+${e}$`,`i`);if(t.test(a)){s=e,a=a.replace(t,``).trim();break}}return{brand:a,material:r,variant:s}}function JU(e,t){let n=new Set(BU);for(let t of e){let{brand:e}=qU(t.name);e&&e.length>1&&n.add(e)}if(t)for(let e of t)if(e.filament_vendor&&e.filament_vendor.length>1)n.add(e.filament_vendor);else{let{brand:t}=qU(e.name);t&&t.length>1&&n.add(t)}return Array.from(n).sort((e,t)=>e.localeCompare(t))}function hOe(e){let t=e.filter(e=>e.preset_type===`filament`);return t.length===0?[]:t.map(e=>{let t=String(e.id),n=e.filament_type||t,r=Array.from(new Set([t,n]));return{code:t,name:e.name,displayName:e.name,isCustom:!1,allCodes:r,source:`local`}}).sort((e,t)=>e.displayName.localeCompare(t.displayName))}function YU(e,t,n,r,i){let a=[],o=[],s=new Set;for(let n of e)if(n.is_custom){let e=n.name.toUpperCase();(t.size===0||Array.from(t).some(t=>e.includes(t))||!e.includes(`@`))&&(a.push({code:n.setting_id,name:n.name,displayName:`${n.name} (Custom)`,isCustom:!0,allCodes:[n.setting_id],source:i?.has(n.setting_id)?`orca_cloud`:`cloud`}),s.add(n.setting_id))}else o.push({code:n.setting_id,name:n.name,displayName:n.name,isCustom:!1,allCodes:[n.setting_id],source:i?.has(n.setting_id)?`orca_cloud`:`cloud`}),s.add(n.setting_id);let c=n&&n.length>0?hOe(n):[],l=[];if(r&&r.length>0)for(let e of r){let t=e.filament_id.startsWith(`GF`)?`GFS`+e.filament_id.slice(2):e.filament_id;s.has(e.filament_id)||s.has(t)||l.push({code:e.filament_id,name:e.name,displayName:e.name,isCustom:!1,allCodes:[e.filament_id,t],source:`builtin`})}let u=[...a,...o,...c,...l];return u.length===0?mOe:u.sort((e,t)=>e.displayName.localeCompare(t.displayName))}function XU(e,t){if(!e)return;let n=t.find(t=>t.code===e);if(n||=t.find(t=>t.allCodes.includes(e)),!n){let r=e.toLowerCase();n=t.find(e=>e.code.toLowerCase()===r||e.allCodes.some(e=>e.toLowerCase()===r))}return n}function ZU(e,t){let n=t.trim();return!n||e.some(e=>e.toLowerCase()===n.toLowerCase())?e:[...e,n].sort((e,t)=>e.localeCompare(t))}function QU(e,t,n){if(!t)return[];let r=n.get(t.toLowerCase());return!r||r.size===0?[]:e.filter(e=>r.has(e.toLowerCase()))}function $U(){try{let e=localStorage.getItem(WU);if(e)return JSON.parse(e)}catch{}return[]}function eW(e,t){let n=[e,...t.filter(t=>t.hex.toUpperCase()!==e.hex.toUpperCase())].slice(0,8);try{localStorage.setItem(WU,JSON.stringify(n))}catch{}return n}function tW(e){if(!e)return``;let t=e.split(`_`)[0];return/^GFS/i.test(t)&&(t=t.slice(0,2)+t.slice(3)),t.toUpperCase()}function gOe(e){return!!e&&/^GF[A-Z]99$/i.test(e)}var _Oe={GFB99:`ABS`,GFC99:`PC`,GFG99:`PETG`,GFL99:`PLA`,GFN99:`PA`,GFP99:`PE`,GFR99:`EVA`,GFS99:`PVA`,GFU99:`TPU`};function vOe(e){return e&&_Oe[e.toUpperCase()]||``}function nW(e){let t=e.trim().toUpperCase();return t===`NYLON`?`PA`:t}function yOe(e,t){let n=vOe(e);return!!n&&!!t&&nW(n)===nW(t)}function rW(e,t,n){return`${e}:${t}:${n}`}function iW(e,t){return`${e}\u0000${t}`}function bOe(e){let[t=``,n=``]=e.split(`\0`);return{model:t,diameter:n}}function aW(e,t){if(!t.material)return!1;let n=tW(t.slicer_filament),r=tW(e.filament_id);if(n&&r&&n===r){if(!gOe(r))return!0;let e=t.brand.trim();if((!e||e.toUpperCase()===`GENERIC`)&&yOe(r,t.material))return!0}let i=(e.name||``).replace(/^High Flow[_\s]+/i,``).replace(/^Standard[_\s]+/i,``).replace(/^HF[_\s]+/i,``).replace(/^S[_\s]+/i,``).trim(),a=qU(i);return!(a.material.toUpperCase()!==t.material.toUpperCase()||t.brand&&!(a.brand.toLowerCase().includes(t.brand.toLowerCase())||t.brand.toLowerCase().includes(a.brand.toLowerCase()))||t.subtype&&!(a.variant.toLowerCase().includes(t.subtype.toLowerCase())||t.subtype.toLowerCase().includes(a.variant.toLowerCase())||i.toLowerCase().includes(t.subtype.toLowerCase())))}function oW(){let e=(0,y.useRef)(null),t=(0,y.useCallback)(()=>{e.current!==null&&(clearTimeout(e.current),e.current=null)},[]),n=(0,y.useCallback)((n,r)=>{t(),e.current=setTimeout(()=>{e.current=null,n()},r)},[t]);return(0,y.useEffect)(()=>t,[t]),{schedule:n,cancel:t}}function sW(e){let t=e.includes(`_`)?e.split(`_`)[0]:e;return t.startsWith(`GFS`)?`GF`+t.slice(3):(t.startsWith(`PFUS`)||t.startsWith(`PFSP`),t)}var cW=[`PLA`,`PETG`,`PCTG`,`ABS`,`ASA`,`TPU`,`PC`,`PA`,`NYLON`,`PVA`,`HIPS`,`PP`,`PET`];function lW(e){let t=e.replace(/@.+$/,``).trim(),n=t.toUpperCase(),r=n.match(/\bSUPPORT\s+FOR\s+/);if(r){let e=n.slice(r.index+r[0].length);for(let n of cW)if(RegExp(`\\b${n}\\b`).test(e))return{material:n,brand:t.slice(0,r.index).trim(),variant:`Support`}}for(let e of cW){let r=RegExp(`\\b${e}\\b`,`i`);if(r.test(n)){let n=t.split(r);return{material:e,brand:n[0]?.trim()||``,variant:n[1]?.trim()||``}}}let i=t.split(/\s+/);return i.length>=2?{material:i[1],brand:i[0],variant:i.slice(2).join(` `)}:{material:t,brand:``,variant:``}}function uW(e){return`${e.extruder_id??0}|${e.name}|${e.k_value}`}function dW(e,t){return t===void 0?!1:e.some(e=>(e.extruder_id??0)===t)}function fW(e,t,n){return dW(e,n)?e.find(e=>e.slot_id===t&&(e.extruder_id??0)===n):e.find(e=>e.slot_id===t)}function pW(e,t,n){return t?` \u00b7 ${e.extruder_id===1?n(`common.left`):n(`common.right`)}`:``}function xOe(e){return!e.startsWith(`GF`)&&!e.startsWith(`P1`)}var SOe={white:`FFFFFF`,black:`000000`,red:`FF0000`,green:`00FF00`,blue:`0000FF`,yellow:`FFFF00`,cyan:`00FFFF`,magenta:`FF00FF`,orange:`FFA500`,purple:`800080`,pink:`FFC0CB`,brown:`8B4513`,gray:`808080`,grey:`808080`,"jade white":`FFFEF2`,ivory:`FFFFF0`,beige:`F5F5DC`,cream:`FFFDD0`,silver:`C0C0C0`,gold:`FFD700`,bronze:`CD7F32`,copper:`B87333`,navy:`000080`,teal:`008080`,olive:`808000`,maroon:`800000`,coral:`FF7F50`,salmon:`FA8072`,lime:`32CD32`,mint:`98FF98`,"forest green":`228B22`,"sky blue":`87CEEB`,"royal blue":`4169E1`,turquoise:`40E0D0`,lavender:`E6E6FA`,violet:`EE82EE`,plum:`DDA0DD`,tan:`D2B48C`,chocolate:`D2691E`,charcoal:`36454F`,slate:`708090`,transparent:`000000`,natural:`F5F5DC`,wood:`DEB887`},mW=[{name:`White`,hex:`FFFFFF`},{name:`Black`,hex:`000000`},{name:`Red`,hex:`FF0000`},{name:`Blue`,hex:`0000FF`},{name:`Green`,hex:`00AA00`},{name:`Yellow`,hex:`FFFF00`},{name:`Orange`,hex:`FFA500`},{name:`Gray`,hex:`808080`}],hW=[{name:`Cyan`,hex:`00FFFF`},{name:`Magenta`,hex:`FF00FF`},{name:`Purple`,hex:`800080`},{name:`Pink`,hex:`FFC0CB`},{name:`Brown`,hex:`8B4513`},{name:`Beige`,hex:`F5F5DC`},{name:`Navy`,hex:`000080`},{name:`Teal`,hex:`008080`},{name:`Lime`,hex:`32CD32`},{name:`Gold`,hex:`FFD700`},{name:`Silver`,hex:`C0C0C0`},{name:`Maroon`,hex:`800000`},{name:`Olive`,hex:`808000`},{name:`Coral`,hex:`FF7F50`},{name:`Salmon`,hex:`FA8072`},{name:`Turquoise`,hex:`40E0D0`},{name:`Violet`,hex:`EE82EE`},{name:`Indigo`,hex:`4B0082`},{name:`Chocolate`,hex:`D2691E`},{name:`Tan`,hex:`D2B48C`},{name:`Slate`,hex:`708090`},{name:`Charcoal`,hex:`36454F`},{name:`Ivory`,hex:`FFFFF0`},{name:`Cream`,hex:`FFFDD0`}];function gW(e){return SOe[e.toLowerCase().trim()]||null}function _W({isOpen:e,onClose:t,printerId:n,slotInfo:r,nozzleDiameter:i=`0.4`,printerModel:a,onSuccess:o,fullScreen:s}){let{t:c}=U(),[l,u]=(0,y.useState)(``),[d,f]=(0,y.useState)(null),p=(0,y.useRef)(null);p.current=d;let[m,h]=(0,y.useState)(``),[g,_]=(0,y.useState)(``),[v,b]=(0,y.useState)(``),[x,S]=(0,y.useState)(!1),[C,w]=(0,y.useState)(!1),T=(0,y.useRef)(``),{schedule:E}=oW(),{data:D,isLoading:O,isError:k}=K({queryKey:[`cloudSettings`],queryFn:()=>Z.getCloudSettings(),enabled:e,retry:!1}),{data:A}=K({queryKey:[`orcaCloudProfilesForAmsSlot`],queryFn:()=>Z.orcaCloudListProfiles(),enabled:e,retry:!1}),{data:j,isLoading:M}=K({queryKey:[`localPresets`],queryFn:()=>Z.getLocalPresets(),enabled:e}),{data:N,isLoading:P}=K({queryKey:[`builtinFilaments`],queryFn:()=>Z.getBuiltinFilaments(),enabled:e,staleTime:1/0}),{data:F,isLoading:I}=K({queryKey:[`kprofiles`,n,i],queryFn:()=>Z.getKProfiles(n,i),enabled:e&&!!n}),{data:L}=K({queryKey:[`colorCatalog`],queryFn:()=>Z.getColorCatalog(),enabled:e,staleTime:1/0}),{data:R}=K({queryKey:[`slicerPrinterModels`],queryFn:Z.getSlicerPrinterModels,enabled:e,staleTime:1/0}),{data:z}=K({queryKey:[`slot-spool-defaults`,n,r.amsId,r.trayId],queryFn:()=>Z.getSlotSpoolDefaults(n,r.amsId,r.trayId),enabled:e,staleTime:0}),B=(0,y.useMemo)(()=>jU(R??{}),[R]),V=(0,y.useMemo)(()=>{if(!a||!R)return null;for(let[e,t]of Object.entries(R))if(t===a)return`${e.startsWith(`Bambu Lab `)?e:`Bambu Lab ${e}`} ${i} nozzle`;return null},[a,R,i]),ee=q({mutationFn:async()=>{if(!l)throw Error(`No filament preset selected`);let e=l.startsWith(`local_`),t=l.startsWith(`builtin_`),a=l.startsWith(`orca_`)?l.replace(`orca_`,``):l,o=!e&&!t?A?.filament.find(e=>e.setting_id===a):void 0,s=!!o,c=o??null,u=e?parseInt(l.replace(`local_`,``),10):null,d=t?l.replace(`builtin_`,``):null,f=e?j?.filament.find(e=>e.id===u):null,h=t?N?.find(e=>e.filament_id===d):null,g=!e&&!t&&!s?D?.filament.find(e=>e.setting_id===l):null;if(!e&&!t&&!s&&!g)throw Error(`Selected preset not found`);if(e&&!f)throw Error(`Selected local preset not found`);if(t&&!h)throw Error(`Selected builtin preset not found`);if(s&&!c)throw Error(`Selected Orca Cloud preset not found`);let _=e?f.name:t?h.name:s?c.name:g.name,v=lW(_),y=p.current?.slot_id??-1,b=m||r.trayColor?.slice(0,6)||`FFFFFF`,x=_.replace(/@.+$/,``).trim(),S,C,w=v.material.toUpperCase(),T={PLA:`GFL99`,"PLA-CF":`GFL98`,"PLA SILK":`GFL96`,"PLA HIGH SPEED":`GFL95`,PETG:`GFG99`,"PETG HF":`GFG96`,"PETG-CF":`GFG98`,PCTG:`GFG97`,ABS:`GFB99`,ASA:`GFB98`,PC:`GFC99`,PA:`GFN99`,"PA-CF":`GFN98`,NYLON:`GFN99`,TPU:`GFU99`,PVA:`GFS99`,HIPS:`GFS98`,PE:`GFP99`,PP:`GFP97`};if(e){let e=(cW.includes(w)?w:f?.filament_type||v.material||``).toUpperCase();S=T[e]||T[e.replace(/[-\s]?CF$/,``)]||T[e.replace(/\+$/,``)]||T[e.split(/[-\s]/)[0]]||``,C=``}else if(s){let e=``;try{let t=(await Z.orcaCloudGetProfile(a)).setting?.filament_id;typeof t==`string`&&t&&(e=t)}catch(e){console.warn(`Failed to fetch Orca Cloud profile for filament_id:`,e)}if(S=e,!S){let e=(cW.includes(w)?w:v.material||``).toUpperCase();S=T[e]||T[e.replace(/[-\s]?CF$/,``)]||T[e.replace(/\+$/,``)]||T[e.split(/[-\s]/)[0]]||``}C=``}else if(t)S=d,C=``;else{if(S=sW(l),C=l,!l.startsWith(`GFS`))try{let e=await Z.getCloudSettingDetail(l),t=e.setting?.filament_id,n=e.filament_id||(typeof t==`string`?t:``);n&&(S=n)}catch(e){console.warn(`Failed to fetch preset detail for filament_id:`,e)}/^(PFUS|PFSP|PFCN)/.test(S)&&(console.warn(`Cloud preset ${l} carries no filament_id in either place; sending no tray_info_idx so the printer keeps a resolvable one.`),S=``)}let E=e&&f?.nozzle_temp_min?f.nozzle_temp_min:190,O=e&&f?.nozzle_temp_max?f.nozzle_temp_max:230;if(!e||t||s||!f?.nozzle_temp_min&&!f?.nozzle_temp_max){let t=(e?cW.includes(w)?w:f?.filament_type||v.material||``:v.material).toUpperCase();t.includes(`PLA`)?(E=190,O=230):t.includes(`PETG`)?(E=220,O=260):t.includes(`ABS`)||t.includes(`ASA`)?(E=240,O=280):t.includes(`TPU`)?(E=200,O=240):t===`PCTG`?(E=220,O=260):t.includes(`PC`)?(E=260,O=300):(t.includes(`PA`)||t.includes(`NYLON`))&&(E=250,O=290)}let k=p.current?.k_value?parseFloat(p.current.k_value):0,M=e?cW.includes(w)?w:f?.filament_type||v.material||`PLA`:s&&cW.includes(w)?w:v.material||`PLA`,P=await Z.configureAmsSlot(n,r.amsId,r.trayId,{tray_info_idx:S,tray_type:M,tray_sub_brands:x,tray_color:b+`FF`,nozzle_temp_min:E,nozzle_temp_max:O,cali_idx:y,nozzle_diameter:i,setting_id:C,kprofile_filament_id:p.current?.filament_id,kprofile_setting_id:p.current?.setting_id||void 0,k_value:k}),F=e?`local_${u}`:t?`builtin_${d}`:l,I=e?`local`:t?`builtin`:s?`orca_cloud`:`cloud`;try{await Z.saveSlotPreset(n,r.amsId,r.trayId,F,x,I)}catch(e){console.warn(`Failed to save slot preset mapping:`,e)}return P},onSuccess:()=>{S(!0),o?.(),E(()=>{S(!1),t()},1500)}}),te=q({mutationFn:async()=>Z.resetAmsSlot(n,r.amsId,r.trayId),onSuccess:()=>{S(!0),o?.(),E(()=>{S(!1),t()},1500)}}),ne=(0,y.useMemo)(()=>{let e=v.toLowerCase(),t=[],n=new Set,i=r.savedPresetId,o=r.trayInfoIdx;if(A?.filament)for(let r of A.filament){let i=`orca_${r.setting_id}`;if(n.add(r.setting_id),n.add(i),!(e&&!r.name.toLowerCase().includes(e))){if(a){let e=RU(r.name,R??{});if(e&&!AU(e,a))continue}t.push({id:i,name:r.name,source:`orca_cloud`,isUser:!0})}}if(D?.filament)for(let r of D.filament){if(n.has(r.setting_id))continue;n.add(r.setting_id);let s=i===r.setting_id||o&&(r.setting_id===o||sW(r.setting_id)===o);if(!(e&&!r.name.toLowerCase().includes(e))){if(!s&&a){let e=RU(r.name,R??{});if(e&&!AU(e,a))continue}t.push({id:r.setting_id,name:r.name,source:`cloud`,isUser:xOe(r.setting_id)})}}if(j?.filament){let n=r.savedPresetId;for(let r of j.filament){let i=`local_${r.id}`;if(!(e&&!r.name.toLowerCase().includes(e))){if(n!==i&&V){let e=null;if(r.compatible_printers)try{let t=JSON.parse(r.compatible_printers);Array.isArray(t)&&(e=t.filter(e=>typeof e==`string`))}catch{e=null}if(LU({name:r.name,compatible_printers:e},`filament`,V,B)===`mismatch`)continue}t.push({id:i,name:r.name,source:`local`,isUser:!1})}}}if(N)for(let r of N){if(n.has(r.filament_id))continue;let i=r.filament_id.startsWith(`GF`)?`GFS`+r.filament_id.slice(2):r.filament_id;n.has(i)||(!e||r.name.toLowerCase().includes(e))&&t.push({id:`builtin_${r.filament_id}`,name:r.name,source:`builtin`,isUser:!1})}return t.sort((e,t)=>{let n={local:0,orca_cloud:1,cloud:2,builtin:3};return e.source===t.source?e.isUser&&!t.isUser?-1:!e.isUser&&t.isUser?1:e.name.localeCompare(t.name):n[e.source]-n[t.source]})},[A?.filament,D?.filament,j?.filament,N,v,a,r.savedPresetId,r.trayInfoIdx,V,B,R]),re=(0,y.useMemo)(()=>{if(!l)return null;let e=null,t=``;if(l.startsWith(`local_`)){let t=parseInt(l.replace(`local_`,``),10);e=j?.filament.find(e=>e.id===t)?.name||null}else if(l.startsWith(`builtin_`)){let n=l.replace(`builtin_`,``);e=N?.find(e=>e.filament_id===n)?.name||null,t=tW(n)}else{let n=l.startsWith(`orca_`)?l.replace(`orca_`,``):l,r=A?.filament.find(e=>e.setting_id===n);if(r)e=r.name;else if(D?.filament){let n=D.filament.find(e=>e.setting_id===l);e=n?.name||null,n&&(t=tW(n.setting_id))}}if(!e)return null;let n=e.replace(/@.+$/,``).trim();n.startsWith(`# `)&&(n=n.slice(2).trim());let r=lW(n);return{fullName:n,material:r.material,brand:r.brand,filamentId:t}},[l,D?.filament,j?.filament,N,A?.filament]),ie=re?.fullName||``,ae=(0,y.useMemo)(()=>{if(!L||!re)return[];let{fullName:e,brand:t}=re,n=e.replace(/^(Bambu\s*(Lab)?|eSUN|Polymaker|Overture|Sunlu|Hatchbox)\s*/i,``).trim();return L.filter(e=>{let r=(e.material||``).toUpperCase(),i=e.manufacturer.toUpperCase();if(!(r===n.toUpperCase()||r.includes(n.toUpperCase())||n.toUpperCase().includes(r)))return!1;if(t){let e=t.toUpperCase();if(!i.includes(e)&&!e.includes(i))return!1}return!0})},[L,re]),oe=(0,y.useMemo)(()=>new Set((F?.profiles??[]).map(e=>e.extruder_id??0)).size>1,[F?.profiles]),se=(0,y.useMemo)(()=>{if(!F?.profiles)return[];if(!re){let e=r.caliIdx;if(e!=null&&e>0){let t=fW(F.profiles,e,r.extruderId);if(t)return[t]}return[]}let{fullName:e,material:t,brand:n,filamentId:i}=re,a=e.toUpperCase(),o=t.toUpperCase(),s=n.toUpperCase()===`GENERIC`?``:n.toUpperCase(),c=i;if(!o||o.length<2)return[];let l=F.profiles.filter(e=>{if(c){let t=tW(e.filament_id);if(t&&t===c)return!0}let t=e.name.toUpperCase();if(s)return!(!t.includes(s)||!t.includes(o));if(t.includes(a)||t.includes(o))return!0;let n={NYLON:[`PA`,`PA-CF`,`PA6`],PA:[`NYLON`]}[o]||[];for(let e of n)if(t.includes(e))return!0;return!1}),u=dW(F.profiles,r.extruderId)?l.filter(e=>(e.extruder_id??0)===r.extruderId):l,d=new Map;for(let e of u){let t=uW(e);d.has(t)||d.set(t,e)}let f=Array.from(d.values()),p=r.caliIdx;if(p!=null&&p>0&&!f.some(e=>e.slot_id===p)){let e=fW(F.profiles,p,r.extruderId);e&&f.unshift(e)}return f},[F?.profiles,re,r.extruderId,r.caliIdx]),H=(0,y.useMemo)(()=>{if(!F?.profiles)return[];let e=new Set(se.map(e=>uW(e))),t=new Map;for(let n of F.profiles){let r=uW(n);e.has(r)||t.has(r)||t.set(r,n)}return Array.from(t.values()).sort((e,t)=>e.name.localeCompare(t.name))},[F?.profiles,se]),ce=se.length>0||H.length>0,le=(0,y.useCallback)(e=>{if(!e){f(null);return}f(se.find(t=>uW(t)===e)||H.find(t=>uW(t)===e)||null)},[se,H]);(0,y.useEffect)(()=>{if(e){if(z?.slicer_filament)u(z.slicer_filament);else if(r.savedPresetId)u(r.savedPresetId);else if(r.trayInfoIdx&&D?.filament){let e=D.filament.find(e=>e.setting_id===r.trayInfoIdx);e||=D.filament.find(e=>sW(e.setting_id)===r.trayInfoIdx),e&&u(e.setting_id)}else if(r.trayInfoIdx&&N?.length){let e=r.trayInfoIdx,t=N.find(t=>t.filament_id===e);t&&u(`builtin_${t.filament_id}`)}if(r.trayColor){let e=r.trayColor.slice(0,6);e&&h(e)}}else u(``),f(null),h(``),_(``),b(``),S(!1),T.current=``},[e,z?.slicer_filament,r.savedPresetId,r.trayInfoIdx,r.trayColor,D?.filament,N]),(0,y.useEffect)(()=>{if(se.length>0){if(z?.cali_idx!=null){let e=fW(se,z.cali_idx,z.extruder??r.extruderId);if(e){f(e);return}}if(r.caliIdx!=null&&r.caliIdx>0){let e=fW(se,r.caliIdx,r.extruderId);if(e){f(e);return}}f(se[0])}else f(null)},[l,se,z?.cali_idx,z?.extruder,r.caliIdx,r.extruderId]);let ue=(0,y.useCallback)(e=>{e.key===`Escape`&&t()},[t]);(0,y.useEffect)(()=>{if(e)return document.addEventListener(`keydown`,ue),()=>document.removeEventListener(`keydown`,ue)},[e,ue]);let de=O&&!k||M||P||I;if((0,y.useEffect)(()=>{if(!de&&l&&l!==T.current){let e=requestAnimationFrame(()=>{let e=document.querySelector(`[class*="fixed inset-0 z-50"]`)?.querySelector(`[data-preset-id="${CSS.escape(l)}"]`);e&&(T.current=l,e.scrollIntoView({block:`nearest`}))});return()=>cancelAnimationFrame(e)}},[l,de]),!e)return null;let fe=l&&!ee.isPending,pe=m||r.trayColor||`FFFFFF`;return(0,G.jsxs)(`div`,{className:`fixed inset-0 z-50 flex ${s?``:`items-center justify-center`}`,children:[!s&&(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60 backdrop-blur-sm`,onClick:t}),(0,G.jsxs)(`div`,{className:s?`relative w-full h-full bg-bambu-dark-secondary flex flex-col`:`relative w-full max-w-lg mx-4 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-2xl`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary shrink-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(tu,{className:`w-5 h-5 text-bambu-blue`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:c(`configureAmsSlot.title`)}),s&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 ml-4 text-sm text-bambu-gray`,children:[(0,G.jsx)(`span`,{className:`text-white/30`,children:`|`}),r.trayColor&&(0,G.jsx)(`span`,{className:`w-4 h-4 rounded-full border border-black/20`,style:kf(r.trayColor)}),(0,G.jsx)(`span`,{className:`text-white/70`,children:c(`configureAmsSlot.slotLabel`,{ams:gp(r.amsId,r.trayCount),slot:r.trayId+1})}),r.traySubBrands&&(0,G.jsxs)(`span`,{children:[`(`,r.traySubBrands,`)`]})]})]}),(0,G.jsx)(`button`,{onClick:t,className:`p-1 text-bambu-gray hover:text-white rounded transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 overflow-y-auto ${s?`flex-1 min-h-0`:`space-y-4 max-h-[60vh]`}`,children:[x&&(0,G.jsx)(`div`,{className:`absolute inset-0 bg-bambu-dark-secondary/95 z-10 flex items-center justify-center rounded-xl`,children:(0,G.jsxs)(`div`,{className:`text-center space-y-3`,children:[(0,G.jsx)(Ss,{className:`w-16 h-16 text-bambu-green mx-auto`}),(0,G.jsx)(`p`,{className:`text-lg font-semibold text-white`,children:c(`configureAmsSlot.slotConfigured`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:c(`configureAmsSlot.settingsSentToPrinter`)})]})}),!s&&(0,G.jsxs)(`div`,{className:`p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-1`,children:c(`configureAmsSlot.configuringSlot`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[r.trayColor&&(0,G.jsx)(`span`,{className:`w-4 h-4 rounded-full border border-black/20`,style:kf(r.trayColor)}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:c(`configureAmsSlot.slotLabel`,{ams:gp(r.amsId,r.trayCount),slot:r.trayId+1})}),r.traySubBrands&&(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[`(`,r.traySubBrands,`)`]})]})]}),de?(0,G.jsx)(`div`,{className:`flex justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})}):s?(0,G.jsxs)(`div`,{className:`flex gap-4 h-full`,children:[(0,G.jsxs)(`div`,{className:`w-1/2 flex flex-col min-h-0`,children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-2`,children:[c(`configureAmsSlot.filamentProfile`),` `,(0,G.jsx)(`span`,{className:`text-red-600 dark:text-red-400`,children:`*`})]}),(0,G.jsx)(`input`,{type:`text`,placeholder:c(`configureAmsSlot.searchPresets`),value:v,onChange:e=>b(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder:text-bambu-gray focus:border-bambu-green focus:outline-none mb-2 shrink-0`}),(0,G.jsx)(`div`,{className:`flex-1 min-h-0 overflow-y-auto space-y-1`,children:ne.length===0?(0,G.jsx)(`p`,{className:`text-center py-4 text-bambu-gray`,children:D?.filament?.length===0&&!j?.filament?.length?c(`configureAmsSlot.noPresetsAvailable`):c(`configureAmsSlot.noMatchingPresets`)}):ne.map(e=>(0,G.jsx)(`button`,{"data-preset-id":e.id,onClick:()=>u(e.id),className:`group w-full p-2 rounded-lg border text-left transition-colors ${l===e.id?`bg-bambu-green/20 border-bambu-green`:`bg-bambu-dark border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-white text-sm truncate group-hover:whitespace-normal group-hover:break-all`,title:e.name,children:e.name}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 flex-shrink-0`,children:[e.source===`local`&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-400`,children:c(`profiles.localProfiles.badge`)}),e.source===`orca_cloud`&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-400`,children:c(`configureAmsSlot.orcaCloud`)}),e.source===`cloud`&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-bambu-blue/20 text-bambu-blue`,children:c(`configureAmsSlot.bambuCloud`)}),e.source===`builtin`&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400`,children:c(`configureAmsSlot.builtin`)})]})]})},e.id))})]}),(0,G.jsxs)(`div`,{className:`w-1/2 flex flex-col gap-4 min-h-0 overflow-y-auto`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-2`,children:[c(`configureAmsSlot.kProfileLabel`),ie&&(0,G.jsx)(`span`,{className:`ml-2 text-xs text-bambu-blue`,children:c(`configureAmsSlot.filteringFor`,{material:ie})})]}),ce?(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:d?uW(d):``,onChange:e=>le(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none pr-10`,children:[(0,G.jsx)(`option`,{value:``,children:c(`configureAmsSlot.noKProfile`)}),se.map(e=>(0,G.jsxs)(`option`,{value:uW(e),children:[e.name,` (K=`,e.k_value,`)`,pW(e,oe,c)]},uW(e))),H.length>0&&(0,G.jsx)(`optgroup`,{label:c(`configureAmsSlot.otherKProfiles`),children:H.map(e=>(0,G.jsxs)(`option`,{value:uW(e),children:[e.name,` (K=`,e.k_value,`)`,pW(e,oe,c)]},uW(e)))})]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}):l?(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic py-2`,children:c(`configureAmsSlot.noMatchingKProfiles`)}):(0,G.jsx)(`span`,{className:`inline-block text-xs px-2 py-1 rounded bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400 border border-amber-300 dark:border-amber-500/30`,children:c(`configureAmsSlot.selectFilamentFirst`)}),d&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-green mt-1`,children:c(`configureAmsSlot.kFromCalibration`,{value:d.k_value})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-2`,children:c(`configureAmsSlot.customColorLabel`)}),ae.length>0&&(0,G.jsxs)(`div`,{className:`mb-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-1.5`,children:c(`configureAmsSlot.presetColors`,{name:re?.fullName})}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1.5`,children:ae.map(e=>(0,G.jsxs)(`button`,{onClick:()=>{h(e.hex_color.replace(`#`,``).toUpperCase()),_(e.color_name)},className:`h-7 px-2 rounded-md border-2 transition-all flex items-center gap-1.5 ${m===e.hex_color.replace(`#`,``).toUpperCase()?`border-bambu-green scale-105`:`border-white/20 hover:border-white/40`}`,title:e.color_name,children:[(0,G.jsx)(`span`,{className:`w-4 h-4 rounded-full border border-black/20 flex-shrink-0`,style:{backgroundColor:e.hex_color}}),(0,G.jsx)(`span`,{className:`text-xs text-white/80 whitespace-nowrap`,children:e.color_name})]},e.id))})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-1.5 mb-2`,children:[mW.map(e=>(0,G.jsx)(`button`,{onClick:()=>{h(e.hex),_(e.name)},className:`w-7 h-7 rounded-md border-2 transition-all ${m===e.hex?`border-bambu-green scale-110`:`border-white/20 hover:border-white/40`}`,style:{backgroundColor:`#${e.hex}`},title:e.name},e.hex)),(0,G.jsx)(`button`,{onClick:()=>w(!C),className:`w-7 h-7 rounded-md border-2 border-white/20 hover:border-white/40 flex items-center justify-center text-white/60 hover:text-white/80 transition-all text-xs`,title:c(C?`configureAmsSlot.showLessColors`:`configureAmsSlot.showMoreColors`),children:C?`−`:`+`})]}),C&&(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1.5 mb-2`,children:hW.map(e=>(0,G.jsx)(`button`,{onClick:()=>{h(e.hex),_(e.name)},className:`w-7 h-7 rounded-md border-2 transition-all ${m===e.hex?`border-bambu-green scale-110`:`border-white/20 hover:border-white/40`}`,style:{backgroundColor:`#${e.hex}`},title:e.name},e.hex))}),(0,G.jsxs)(`div`,{className:`flex gap-2 items-center`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-lg border-2 border-white/20 flex-shrink-0`,style:kf(pe)}),(0,G.jsx)(`input`,{type:`text`,placeholder:c(`configureAmsSlot.colorPlaceholder`),value:g,onChange:e=>{let t=e.target.value;_(t);let n=gW(t);if(n)h(n);else{let e=t.replace(/[^0-9A-Fa-f]/g,``).toUpperCase();e.length===6?h(e):e.length===3&&h(e.split(``).map(e=>e+e).join(``))}},className:`flex-1 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder:text-bambu-gray focus:border-bambu-green focus:outline-none text-sm`}),m&&(0,G.jsx)(`button`,{onClick:()=>{h(``),_(``)},className:`px-2 py-1 text-xs text-bambu-gray hover:text-white bg-bambu-dark-tertiary rounded`,title:c(`configureAmsSlot.clearCustomColor`),children:c(`configureAmsSlot.clear`)})]}),m&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1.5`,children:c(`configureAmsSlot.hexLabel`,{hex:m})})]})]})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-2`,children:[c(`configureAmsSlot.filamentProfile`),` `,(0,G.jsx)(`span`,{className:`text-red-600 dark:text-red-400`,children:`*`})]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`input`,{type:`text`,placeholder:c(`configureAmsSlot.searchPresets`),value:v,onChange:e=>b(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder:text-bambu-gray focus:border-bambu-green focus:outline-none mb-2`}),(0,G.jsx)(`div`,{className:`max-h-48 overflow-y-auto space-y-1`,children:ne.length===0?(0,G.jsx)(`p`,{className:`text-center py-4 text-bambu-gray`,children:D?.filament?.length===0&&!j?.filament?.length?c(`configureAmsSlot.noPresetsAvailable`):c(`configureAmsSlot.noMatchingPresets`)}):ne.map(e=>(0,G.jsx)(`button`,{"data-preset-id":e.id,onClick:()=>u(e.id),className:`group w-full p-2 rounded-lg border text-left transition-colors ${l===e.id?`bg-bambu-green/20 border-bambu-green`:`bg-bambu-dark border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-white text-sm truncate group-hover:whitespace-normal group-hover:break-all`,title:e.name,children:e.name}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 flex-shrink-0`,children:[e.source===`local`&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-400`,children:c(`profiles.localProfiles.badge`)}),e.source===`orca_cloud`&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-400`,children:c(`configureAmsSlot.orcaCloud`)}),e.source===`cloud`&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-bambu-blue/20 text-bambu-blue`,children:c(`configureAmsSlot.bambuCloud`)}),e.source===`builtin`&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400`,children:c(`configureAmsSlot.builtin`)})]})]})},e.id))})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-2`,children:[c(`configureAmsSlot.kProfileLabel`),ie&&(0,G.jsx)(`span`,{className:`ml-2 text-xs text-bambu-blue`,children:c(`configureAmsSlot.filteringFor`,{material:ie})})]}),ce?(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:d?uW(d):``,onChange:e=>le(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none pr-10`,children:[(0,G.jsx)(`option`,{value:``,children:c(`configureAmsSlot.noKProfile`)}),se.map(e=>(0,G.jsxs)(`option`,{value:uW(e),children:[e.name,` (K=`,e.k_value,`)`,pW(e,oe,c)]},uW(e))),H.length>0&&(0,G.jsx)(`optgroup`,{label:c(`configureAmsSlot.otherKProfiles`),children:H.map(e=>(0,G.jsxs)(`option`,{value:uW(e),children:[e.name,` (K=`,e.k_value,`)`,pW(e,oe,c)]},uW(e)))})]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}):l?(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic py-2`,children:c(`configureAmsSlot.noMatchingKProfiles`)}):(0,G.jsx)(`span`,{className:`inline-block text-xs px-2 py-1 rounded bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400 border border-amber-300 dark:border-amber-500/30`,children:c(`configureAmsSlot.selectFilamentFirst`)}),d&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-green mt-1`,children:c(`configureAmsSlot.kFromCalibration`,{value:d.k_value})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-2`,children:c(`configureAmsSlot.customColorLabel`)}),ae.length>0&&(0,G.jsxs)(`div`,{className:`mb-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-1.5`,children:c(`configureAmsSlot.presetColors`,{name:re?.fullName})}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1.5`,children:ae.map(e=>(0,G.jsxs)(`button`,{onClick:()=>{h(e.hex_color.replace(`#`,``).toUpperCase()),_(e.color_name)},className:`h-7 px-2 rounded-md border-2 transition-all flex items-center gap-1.5 ${m===e.hex_color.replace(`#`,``).toUpperCase()?`border-bambu-green scale-105`:`border-white/20 hover:border-white/40`}`,title:e.color_name,children:[(0,G.jsx)(`span`,{className:`w-4 h-4 rounded-full border border-black/20 flex-shrink-0`,style:{backgroundColor:e.hex_color}}),(0,G.jsx)(`span`,{className:`text-xs text-white/80 whitespace-nowrap`,children:e.color_name})]},e.id))})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-1.5 mb-2`,children:[mW.map(e=>(0,G.jsx)(`button`,{onClick:()=>{h(e.hex),_(e.name)},className:`w-7 h-7 rounded-md border-2 transition-all ${m===e.hex?`border-bambu-green scale-110`:`border-white/20 hover:border-white/40`}`,style:{backgroundColor:`#${e.hex}`},title:e.name},e.hex)),(0,G.jsx)(`button`,{onClick:()=>w(!C),className:`w-7 h-7 rounded-md border-2 border-white/20 hover:border-white/40 flex items-center justify-center text-white/60 hover:text-white/80 transition-all text-xs`,title:c(C?`configureAmsSlot.showLessColors`:`configureAmsSlot.showMoreColors`),children:C?`−`:`+`})]}),C&&(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1.5 mb-2`,children:hW.map(e=>(0,G.jsx)(`button`,{onClick:()=>{h(e.hex),_(e.name)},className:`w-7 h-7 rounded-md border-2 transition-all ${m===e.hex?`border-bambu-green scale-110`:`border-white/20 hover:border-white/40`}`,style:{backgroundColor:`#${e.hex}`},title:e.name},e.hex))}),(0,G.jsxs)(`div`,{className:`flex gap-2 items-center`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-lg border-2 border-white/20 flex-shrink-0`,style:kf(pe)}),(0,G.jsx)(`input`,{type:`text`,placeholder:c(`configureAmsSlot.colorPlaceholder`),value:g,onChange:e=>{let t=e.target.value;_(t);let n=gW(t);if(n)h(n);else{let e=t.replace(/[^0-9A-Fa-f]/g,``).toUpperCase();e.length===6?h(e):e.length===3&&h(e.split(``).map(e=>e+e).join(``))}},className:`flex-1 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder:text-bambu-gray focus:border-bambu-green focus:outline-none text-sm`}),m&&(0,G.jsx)(`button`,{onClick:()=>{h(``),_(``)},className:`px-2 py-1 text-xs text-bambu-gray hover:text-white bg-bambu-dark-tertiary rounded`,title:c(`configureAmsSlot.clearCustomColor`),children:c(`configureAmsSlot.clear`)})]}),m&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1.5`,children:c(`configureAmsSlot.hexLabel`,{hex:m})})]})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-between p-4 border-t border-bambu-dark-tertiary shrink-0`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>te.mutate(),disabled:te.isPending||ee.isPending,className:`text-red-600 dark:text-red-400 hover:text-red-700 dark:hover:text-red-300 hover:bg-red-50 dark:hover:bg-red-500/10`,children:te.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),c(`configureAmsSlot.resetting`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ul,{className:`w-4 h-4`}),c(`configureAmsSlot.resetSlot`)]})}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:t,children:c(`configureAmsSlot.cancel`)}),(0,G.jsx)(Q,{onClick:()=>ee.mutate(),disabled:!fe,children:ee.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),c(`configureAmsSlot.configuring`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(tu,{className:`w-4 h-4`}),c(`configureAmsSlot.configureSlot`)]})})]})]}),(ee.isError||te.isError)&&(0,G.jsx)(`div`,{className:`mx-4 mb-4 p-2 bg-red-100 dark:bg-red-500/20 border border-red-300 dark:border-red-500/50 rounded text-sm text-red-700 dark:text-red-400`,children:ee.error?.message||te.error?.message})]})]})}function vW({className:e=`w-4 h-4`}){return(0,G.jsx)(`svg`,{viewBox:`0 0 1945 1370`,fill:`none`,className:e,"aria-hidden":`true`,children:(0,G.jsxs)(`g`,{transform:`translate(-754.293 -471.685)`,children:[(0,G.jsxs)(`g`,{transform:`translate(0.18191 255.976)`,children:[(0,G.jsx)(`g`,{transform:`matrix(1.05469 0 0 0.241063 -153.484 1120.2)`,children:(0,G.jsx)(`rect`,{x:`922.048`,y:`1195.15`,width:`1721.5`,height:`470.135`,stroke:`currentColor`,strokeOpacity:`0.99`,strokeWidth:`168.84`,strokeLinecap:`round`,strokeLinejoin:`round`})}),(0,G.jsx)(`g`,{transform:`matrix(0.983656 0 0 1.0767 -62.2035 141.539)`,children:(0,G.jsx)(`path`,{d:`M2741.42,1175.93L895.832,1175.93L1125.16,621.902L2512.09,621.902L2741.42,1175.93Z`,fill:`currentColor`,fillOpacity:`0.05`,stroke:`currentColor`,strokeOpacity:`0.99`,strokeWidth:`125.26`,strokeLinecap:`round`,strokeLinejoin:`round`})})]}),(0,G.jsx)(`g`,{transform:`translate(21.1916 0.684817)`,children:(0,G.jsx)(`path`,{d:`M1981.31,567.518C1954.86,567.518 1933.39,546.047 1933.39,519.601C1933.39,493.156 1954.86,471.685 1981.31,471.685L2146.61,471.685C2173.07,471.685 2194.53,493.138 2194.53,519.601L2194.53,688.741C2194.53,715.187 2173.05,736.658 2146.61,736.658C2120.16,736.658 2098.69,715.187 2098.69,688.741L2098.69,567.518L1981.31,567.518ZM2098.69,1252.54C2098.69,1226.1 2120.16,1204.62 2146.61,1204.62C2173.05,1204.62 2194.53,1226.1 2194.53,1252.54L2194.53,1421.68C2194.53,1448.14 2173.07,1469.6 2146.61,1469.6L1981.31,1469.6C1954.86,1469.6 1933.39,1448.13 1933.39,1421.68C1933.39,1395.24 1954.86,1373.76 1981.31,1373.76L2098.69,1373.76L2098.69,1252.54ZM1430.29,1373.76C1456.74,1373.76 1478.21,1395.24 1478.21,1421.68C1478.21,1448.13 1456.74,1469.6 1430.29,1469.6L1264.99,1469.6C1238.53,1469.6 1217.07,1448.14 1217.07,1421.68L1217.07,1252.54C1217.07,1226.1 1238.55,1204.62 1264.99,1204.62C1291.44,1204.62 1312.91,1226.1 1312.91,1252.54L1312.91,1373.76L1430.29,1373.76ZM1312.91,688.741C1312.91,715.187 1291.44,736.658 1264.99,736.658C1238.55,736.658 1217.07,715.187 1217.07,688.741L1217.07,519.601C1217.07,493.138 1238.53,471.685 1264.99,471.685L1430.29,471.685C1456.74,471.685 1478.21,493.156 1478.21,519.601C1478.21,546.047 1456.74,567.518 1430.29,567.518L1312.91,567.518L1312.91,688.741Z`,fill:`currentColor`,fillOpacity:`0.99`})})]})})}function yW({folderId:e,onClose:t,onUploadComplete:n,onFileUploaded:r,autoUpload:i,validateFile:a,accept:o,initialFiles:s}){let{t:c}=U(),[l,u]=(0,y.useState)([]),[d,f]=(0,y.useState)(!1),[p,m]=(0,y.useState)(!1),[h,g]=(0,y.useState)(!0),[_,v]=(0,y.useState)(!1),[b,x]=(0,y.useState)(!0),[S,C]=(0,y.useState)(null),w=(0,y.useRef)(null),T=e=>{e.preventDefault(),f(!0)},E=e=>{e.preventDefault(),f(!1)},D=e=>{e.preventDefault(),f(!1),j(Array.from(e.dataTransfer.files))},O=e=>{e.target.files&&j(Array.from(e.target.files))},k=(e,t)=>{u(n=>n.map(n=>n.file===e?{...n,...t}:n))},A=async i=>{m(!0);for(let t of i)if(t.status===`pending`){k(t.file,{status:`uploading`});try{if(t.isZip){let n=await Z.extractZipFile(t.file,e,h,_,b);k(t.file,{status:n.errors.length>0&&n.extracted===0?`error`:`success`,extractedCount:n.extracted,error:n.errors.length>0?c(`fileManager.zipFilesFailed`,`{{count}} files failed`,{count:n.errors.length}):void 0})}else{let n=await Z.uploadLibraryFile(t.file,e,b);k(t.file,{status:`success`});let i=r?.(n);if(i){C(i),u([]),m(!1);return}}}catch(e){k(t.file,{status:`error`,error:e instanceof Error?e.message:c(`fileManager.uploadFailed`,`Upload failed`)})}}m(!1),n(),u(e=>(e.some(e=>e.status===`error`)||t(),e))},j=e=>{if(C(null),a)for(let t of e){let e=a(t);if(e){C(e);return}}let t=e.map(e=>({file:e,status:`pending`,isZip:e.name.toLowerCase().endsWith(`.zip`),is3mf:e.name.toLowerCase().endsWith(`.3mf`)}));u(e=>[...e,...t]),i&&e.length>0&&A(t)},M=e=>{u(t=>t.filter((t,n)=>n!==e))},N=(0,y.useRef)(!1);(0,y.useEffect)(()=>{N.current||!s||s.length===0||(N.current=!0,j(s))},[]);let P=l.some(e=>e.isZip&&e.status===`pending`),F=l.some(e=>e.file.name.toLowerCase().endsWith(`.stl`)&&e.status===`pending`),I=l.some(e=>e.is3mf&&e.status===`pending`),L=l.filter(e=>e.status===`pending`).length,R=l.length>0&&L===0&&!p;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg w-full max-w-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary flex items-center justify-between`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:c(`fileManager.uploadFiles`)}),(0,G.jsx)(`button`,{onClick:t,className:`p-1 hover:bg-bambu-dark rounded`,children:(0,G.jsx)(td,{className:`w-5 h-5 text-bambu-gray`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-4`,children:[(0,G.jsxs)(`div`,{onDragOver:T,onDragLeave:E,onDrop:D,onClick:()=>w.current?.click(),className:`border-2 border-dashed rounded-lg p-8 text-center cursor-pointer transition-colors ${d?`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary hover:border-bambu-green/50`}`,children:[(0,G.jsx)(Bu,{className:`w-10 h-10 mx-auto mb-3 ${d?`text-bambu-green`:`text-bambu-gray`}`}),(0,G.jsx)(`p`,{className:`text-white font-medium`,children:c(d?`fileManager.dropFilesHere`:`fileManager.dragDropFiles`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:c(`fileManager.orClickToBrowse`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/70 mt-2`,children:c(`fileManager.allFileTypesSupported`)})]}),(0,G.jsx)(`input`,{ref:w,type:`file`,multiple:!0,accept:o,className:`hidden`,onChange:O}),P&&(0,G.jsx)(`div`,{className:`p-3 bg-blue-50 dark:bg-blue-500/10 border border-blue-300 dark:border-blue-500/30 rounded-lg`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(Po,{className:`w-5 h-5 text-blue-600 dark:text-blue-400 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`p`,{className:`text-sm text-blue-700 dark:text-blue-300 font-medium`,children:c(`fileManager.zipFilesDetected`)}),(0,G.jsx)(`p`,{className:`text-xs text-blue-700/80 dark:text-blue-300/70 mt-1`,children:c(`fileManager.zipExtractOptions`)}),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 mt-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:h,onChange:e=>g(e.target.checked),className:`w-4 h-4 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:c(`fileManager.preserveZipStructure`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 mt-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:_,onChange:e=>v(e.target.checked),className:`w-4 h-4 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:c(`fileManager.createFolderFromZip`)})]})]})]})}),I&&(0,G.jsx)(`div`,{className:`p-3 bg-purple-50 dark:bg-purple-500/10 border border-purple-300 dark:border-purple-500/30 rounded-lg`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(Ll,{className:`w-5 h-5 text-purple-600 dark:text-purple-400 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`p`,{className:`text-sm text-purple-700 dark:text-purple-300 font-medium`,children:c(`fileManager.threemfDetected`)}),(0,G.jsx)(`p`,{className:`text-xs text-purple-700/80 dark:text-purple-300/70 mt-1`,children:c(`fileManager.threemfExtractionInfo`)})]})]})}),(F||P)&&(0,G.jsx)(`div`,{className:`p-3 bg-bambu-green/10 border border-bambu-green/30 rounded-lg`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(Vc,{className:`w-5 h-5 text-bambu-green mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-green font-medium`,children:c(`fileManager.stlThumbnailGeneration`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-green/70 mt-1`,children:c(P&&!F?`fileManager.zipMayContainStl`:`fileManager.thumbnailsCanBeGenerated`)}),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 mt-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:b,onChange:e=>x(e.target.checked),className:`w-4 h-4 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:c(`fileManager.generateThumbnailsForStl`)})]})]})]})}),l.length>0&&(0,G.jsx)(`div`,{className:`max-h-48 overflow-y-auto space-y-2`,children:l.map((e,t)=>(0,G.jsxs)(`div`,{className:`flex items-center gap-3 p-2 bg-bambu-dark rounded-lg`,children:[e.isZip?(0,G.jsx)(Po,{className:`w-4 h-4 text-blue-600 dark:text-blue-400 flex-shrink-0`}):(0,G.jsx)(fc,{className:`w-4 h-4 text-bambu-gray flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white truncate`,children:e.file.name}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[(e.file.size/1024/1024).toFixed(2),` MB`,e.isZip&&e.status===`pending`&&(0,G.jsxs)(`span`,{className:`text-blue-700 dark:text-blue-400 ml-2`,children:[`• `,c(`fileManager.willBeExtracted`)]}),e.extractedCount!==void 0&&(0,G.jsxs)(`span`,{className:`text-green-700 dark:text-green-400 ml-2`,children:[`• `,c(`fileManager.filesExtracted`,{count:e.extractedCount})]})]}),e.status===`error`&&e.error&&(0,G.jsx)(`p`,{className:`text-xs text-red-700 dark:text-red-400 mt-1 break-words`,children:e.error})]}),e.status===`pending`&&(0,G.jsx)(`button`,{onClick:()=>M(t),className:`p-1 hover:bg-bambu-dark-tertiary rounded`,children:(0,G.jsx)(td,{className:`w-4 h-4 text-bambu-gray`})}),e.status===`uploading`&&(0,G.jsx)(Y,{className:`w-4 h-4 text-bambu-green animate-spin`}),e.status===`success`&&(0,G.jsx)(xs,{className:`w-4 h-4 text-green-500`}),e.status===`error`&&(0,G.jsx)(`span`,{title:e.error,children:(0,G.jsx)(Ds,{className:`w-4 h-4 text-red-500`})})]},t))}),S&&(0,G.jsx)(`div`,{className:`p-3 bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 rounded-lg`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(Ds,{className:`w-5 h-5 text-red-600 dark:text-red-400 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`p`,{className:`text-sm text-red-700 dark:text-red-300`,children:S})]})})]}),(0,G.jsxs)(`div`,{className:`p-4 border-t border-bambu-dark-tertiary flex justify-end gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:t,children:c(`common.cancel`)}),!R&&(0,G.jsx)(Q,{onClick:()=>A(l),disabled:L===0||p,children:p?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 mr-2 animate-spin`}),c(`fileManager.uploading`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Bu,{className:`w-4 h-4 mr-2`}),c(`common.upload`),` `,L>0?`(${L})`:``]})})]})]})})}function bW(e){if(!e)return null;let t=[e.brand,e.material,e.subtype].filter(Boolean);return t.length>0?t.join(` `):null}function xW(e,t){let n=[],r=e?.ams_extruder_map,i=!!e?.nozzles?.[1]?.nozzle_diameter||r&&Object.keys(r).length>0||(e?.vt_tray?.length??0)>1;e?.ams?.forEach(e=>{let i=e.tray.length===1;e.tray.forEach(a=>{if(a.tray_type){let o=dp(a.tray_color),s=kp(e.id,a.id,!1),c=t?.get(s);n.push({type:a.tray_type,color:o,colorName:c?.color_name?.trim()||Tf(o,a.tray_sub_brands),amsId:e.id,trayId:a.id,isHt:i,isExternal:!1,label:Op(e.id,a.id,i,!1),globalTrayId:s,trayInfoIdx:a.tray_info_idx||``,traySubBrands:a.tray_sub_brands||``,spoolName:bW(c)??void 0,extruderId:r?.[String(e.id)],remain:a.remain??-1})}})});for(let r of e?.vt_tray??[])if(r.tray_type){let a=dp(r.tray_color),o=r.id??254,s=(e?.vt_tray?.length??0)>1,c=t?.get(o);n.push({type:r.tray_type,color:a,colorName:c?.color_name?.trim()||Tf(a,r.tray_sub_brands),amsId:-1,trayId:o-254,isHt:!1,isExternal:!0,label:s?o===254?`Ext-L`:`Ext-R`:`External`,globalTrayId:o,trayInfoIdx:r.tray_info_idx||``,traySubBrands:r.tray_sub_brands||``,spoolName:bW(c)??void 0,extruderId:i?255-o:void 0,remain:r.remain??-1})}return n}function SW(e,t,n,r){let i=xW(t);if(i.length!==0)return TW(wW(e,i,{},n,r,t?.fila_switch?.installed===!0))}function COe(e,t){return(0,y.useMemo)(()=>xW(e,t),[e,t])}function CW(e,t){let n=fp(t);return n?fp(e)===n||xp(e,t):!0}function wW(e,t,n,r,i,a=!1){if(!e?.filaments||e.filaments.length===0)return[];let o=new Set(Object.values(n));return e.filaments.map(e=>{let s=e.slot_id||0;if(s>0&&n[s]!==void 0){let r=n[s],i=t.find(e=>e.globalTrayId===r);if(i){let t=bp(i.type,e.type),n=CW(i.color,e.color),r;return r=t&&n?`match`:t?`type_only`:`mismatch`,{...e,loaded:i,hasFilament:!0,typeMatch:t,colorMatch:n,status:r,isManual:!0}}}let c=e.tray_info_idx||``,l=t.filter(e=>!o.has(e.globalTrayId));e.nozzle_id!=null&&!a&&(l=l.filter(t=>t.extruderId===e.nozzle_id)),r&&(l=[...l].sort((e,t)=>Rp(Lp(e,i),Lp(t,i))));let u,d,f,p;if(c){let t=l.filter(e=>e.trayInfoIdx===c);t.length===1?u=t[0]:t.length>1&&(r&&t.sort((e,t)=>Rp(Lp(e,i),Lp(t,i))),d=t.find(t=>bp(t.type,e.type)&&fp(t.color)===fp(e.color)),d||(f=Dp(t.filter(t=>bp(t.type,e.type)),e.color,e=>e.color)),!d&&!f&&(p=t.find(t=>bp(t.type,e.type))))}!u&&!d&&!f&&!p&&(d=l.find(t=>bp(t.type,e.type)&&fp(t.color)===fp(e.color)),d||(f=Dp(l.filter(t=>bp(t.type,e.type)),e.color,e=>e.color)),!d&&!f&&(p=l.find(t=>bp(t.type,e.type))));let m=u||d||f||p||void 0;m&&o.add(m.globalTrayId);let h=!!m,g=h,_=h&&CW(m.color,e.color),v;return v=h?_?`match`:`type_only`:`mismatch`,{...e,loaded:m,hasFilament:h,typeMatch:g,colorMatch:_,status:v,isManual:!1}})}function TW(e){if(e.length===0)return;let t=Math.max(...e.map(e=>e.slot_id||0));if(t<=0)return;let n=Array(t).fill(-1);return e.forEach(e=>{e.slot_id&&e.slot_id>0&&(n[e.slot_id-1]=e.loaded?.globalTrayId??-1)}),n}function EW(e,t,n,r,i,a){let o=COe(t,a),s=t?.fila_switch?.installed===!0,c=(0,y.useMemo)(()=>wW(e,o,n,r,i,s),[e,o,n,r,s,i]);return{loadedFilaments:o,filamentComparison:c,amsMapping:(0,y.useMemo)(()=>o.length===0?void 0:TW(c),[c,o.length]),hasTypeMismatch:c.some(e=>e.status===`mismatch`),hasColorMismatch:c.some(e=>e.status===`type_only`)}}function wOe(e,t,n,r,i){if(!e||e.length===0)return{exactMatches:0,typeOnlyMatches:0,missingTypes:0,totalSlots:0,status:`full`};let a=0,o=0,s=0,c=new Set(Object.values(n));for(let l of e){let e=l.slot_id||0;if(e>0&&n[e]!==void 0){let r=n[e],i=t.find(e=>e.globalTrayId===r);if(i){let e=bp(i.type,l.type),t=fp(i.color)===fp(l.color)||xp(i.color,l.color);e&&t?a++:e?o++:s++;continue}}let u=t.filter(e=>!c.has(e.globalTrayId));if(l.nozzle_id!=null){let e=u.filter(e=>e.extruderId===l.nozzle_id);e.length>0&&(u=e)}r&&(u=[...u].sort((e,t)=>Rp(Lp(e,i),Lp(t,i))));let d=u.find(e=>bp(e.type,l.type)&&fp(e.color)===fp(l.color)),f=d?void 0:Dp(u.filter(e=>bp(e.type,l.type)),l.color,e=>e.color),p=d||f?void 0:u.find(e=>bp(e.type,l.type)),m=d??f??p;m&&c.add(m.globalTrayId),d||f?a++:p?o++:s++}let l=e.length,u=`full`;return s>0?u=`missing`:o>0&&(u=`partial`),{exactMatches:a,typeOnlyMatches:o,missingTypes:s,totalSlots:l,status:u}}function TOe(e,t,n,r,i){if(!e?.filaments||e.filaments.length===0)return;let a=xW(t);if(a.length===0)return;let o=new Set(Object.values(n)),s=[];for(let t of e.filaments){let e=t.slot_id||0;if(e>0&&n[e]!==void 0){s.push({slot_id:e,globalTrayId:n[e]});continue}let c=a.filter(e=>!o.has(e.globalTrayId));if(t.nozzle_id!=null){let e=c.filter(e=>e.extruderId===t.nozzle_id);e.length>0&&(c=e)}r&&(c=[...c].sort((e,t)=>Rp(Lp(e,i),Lp(t,i))));let l=c.find(e=>bp(e.type,t.type)&&fp(e.color)===fp(t.color)),u=l?void 0:Dp(c.filter(e=>bp(e.type,t.type)),t.color,e=>e.color),d=l||u?void 0:c.find(e=>bp(e.type,t.type)),f=l??u??d;f&&o.add(f.globalTrayId),s.push({slot_id:e,globalTrayId:f?.globalTrayId??-1})}let c=Math.max(...s.map(e=>e.slot_id||0));if(c<=0)return;let l=Array(c).fill(-1);return s.forEach(e=>{e.slot_id&&e.slot_id>0&&(l[e.slot_id-1]=e.globalTrayId)}),l}var DW={useDefault:!0,manualMappings:{},autoConfigured:!1};function EOe(e,t,n,r,i,a,o,s){let c=Co({queries:e.map(t=>({queryKey:[`printer-status`,t],queryFn:()=>Z.getPrinterStatus(t),enabled:e.length>0,staleTime:5e3}))}),l=(0,y.useMemo)(()=>e.map((e,a)=>{let l=c[a],u=l?.data,d=t?.find(t=>t.id===e)?.name||`Printer ${e}`,f=xW(u),p=i[e]||DW,m=s?.get(e),h=zp(o,u?.ams_filament_backup),g=SW(n,u,h,m),_=p.useDefault?r:p.manualMappings,v=TOe(n,u,_,h,m),y=wOe(n?.filaments,f,_,h,m);return{printerId:e,printerName:d,status:u,isLoading:l?.isLoading??!1,loadedFilaments:f,autoMapping:g,finalMapping:v,matchStatus:y.status,exactMatches:y.exactMatches,typeOnlyMatches:y.typeOnlyMatches,missingTypes:y.missingTypes,totalSlots:y.totalSlots,config:p,inventoryByTrayId:m}}),[e,c,t,n,i,r,o,s]),u=c.some(e=>e.isLoading),d=(e,t)=>{a(n=>({...n,[e]:{...n[e]||DW,...t}}))},f=e=>{let t=l.find(t=>t.printerId===e);if(!t||!t.status||!n?.filaments)return;let r=SW(n,t.status,zp(o,t.status?.ams_filament_backup),s?.get(e));if(!r)return;let i={};r.forEach((e,t)=>{e!==-1&&(i[t+1]=e)}),d(e,{useDefault:!1,manualMappings:i,autoConfigured:!0})};return{printerResults:l,isLoading:u,perPrinterConfigs:i,updatePrinterConfig:d,autoConfigureAll:()=>{for(let t of e)f(t)},autoConfigurePrinter:f,getFinalMapping:e=>l.find(t=>t.printerId===e)?.finalMapping,allPrintersReady:l.every(e=>e.matchStatus!==`missing`)}}var OW=`/img/bed`,DOe={"cool plate":{icon:`${OW}/bed_cool.png`,label:`Cool Plate`},"pc plate":{icon:`${OW}/bed_cool.png`,label:`Cool Plate`},"cool plate (supertack)":{icon:`${OW}/bed_cool_supertack.png`,label:`Cool Plate SuperTack`},"supertack plate":{icon:`${OW}/bed_cool_supertack.png`,label:`Cool Plate SuperTack`},"bambu cool plate supertack":{icon:`${OW}/bed_cool_supertack.png`,label:`Cool Plate SuperTack`},"engineering plate":{icon:`${OW}/bed_engineering.png`,label:`Engineering Plate`},"high temp plate":{icon:`${OW}/bed_high_templ.png`,label:`High Temp Plate`},"textured pei plate":{icon:`${OW}/bed_pei.png`,label:`Textured PEI Plate`},"pei plate":{icon:`${OW}/bed_pei.png`,label:`PEI Plate`},"smooth pei plate":{icon:`${OW}/bed_pei_cool.png`,label:`Smooth PEI Plate`}};function kW(e){return e?DOe[e.trim().toLowerCase()]??null:null}function OOe(e,t){if(t==null)return;let n=e?.slicer_ams_mapping;if(!(!n||typeof n!=`object`)&&n.printer_id===t&&!(!Array.isArray(n.mapping)||n.mapping.length===0))return n.mapping}function kOe(e){let t=e.trim().split(/\s+/);return t.length<=1?e.trim():t.slice(1).join(` `)}function AW(e){let{data:t}=K({queryKey:[`builtin-filaments`],queryFn:()=>Z.getBuiltinFilaments(),staleTime:300*1e3}),{data:n}=K({queryKey:[`filament-id-map`],queryFn:()=>Z.getFilamentIdMap(),staleTime:300*1e3}),r=(0,y.useMemo)(()=>{let e={};for(let n of t||[])n.filament_id&&(e[n.filament_id]=n.name);for(let[t,r]of Object.entries(n||{}))t&&r&&(e[t]=r);return e},[t,n]),i=(0,y.useMemo)(()=>(e||[]).map(e=>{let t=e.tray_info_idx&&r[e.tray_info_idx]||e.type;return{resolvedName:t,materialHint:kOe(t),color:e.color}}),[e,r]),a=Co({queries:i.map(({color:e,materialHint:t})=>({queryKey:[`color-by-material`,e,t],queryFn:()=>Z.getColorByMaterial(e,t),enabled:!!e,staleTime:300*1e3}))});return i.map(({resolvedName:e,color:t},n)=>({resolvedName:e,colorLabel:(a[n]?.data?.color_name??null)||Tf(t)}))}var jW=Array.from({length:6},(e,t)=>t+1),AOe=0;function MW(e){let t=new Map,n;for(let r of e??[]){if(r.id===AOe){n=r;continue}let e=r.id-15;e>=1&&e<=6&&t.set(e,r)}let r=jW.filter(e=>!t.has(e));return r.length===1&&n&&(n.nozzle_diameter||n.nozzle_type)&&t.set(r[0],n),t}function NW(e,t){if(!e||!e.nozzle_diameter&&!e.nozzle_type)return!1;let n=Number.parseFloat(e.nozzle_diameter),r=Number.parseFloat(t.nozzle_diameter);if(!Number.isFinite(n)||!Number.isFinite(r)||Math.abs(n-r)>.005)return!1;let i=(t.volume_type||``).trim().toLowerCase();if(i&&e.nozzle_type){let t=e.nozzle_type.toUpperCase().startsWith(`HH`);if(i.startsWith(`high flow`)!==t)return!1}return!0}function jOe(e,t,n){let r=MW(e);return jW.map(e=>{let i=r.get(e),a=NW(i,t),o;return a||(o=i?n(`printModal.rackWrongNozzle`,{has:`${i.nozzle_diameter||`?`} ${i.nozzle_type||``}`.trim(),needs:`${t.nozzle_diameter} ${t.volume_type}`.trim()}):n(`printModal.rackEmptyPosition`)),{position:e,diameter:i?.nozzle_diameter??``,nozzleType:i?.nozzle_type??``,filamentColor:i?.filament_color??``,eligible:a,reason:o}})}function MOe(e,t,n={}){let r=MW(e),i={},a=new Set,o=[...t.keys()].filter(e=>t.get(e).on_rack).sort((e,t)=>e-t);for(let e of o){let o=n[e];if(o!=null){if(a.has(o)||!NW(r.get(o),t.get(e)))return null;i[e]=o,a.add(o)}}for(let e of o){if(i[e]!=null)continue;let n=t.get(e),o=jW.filter(e=>!a.has(e)&&NW(r.get(e),n));if(o.length===0)return null;let s=PW(n.filament_color),c=(s?o.find(e=>PW(r.get(e)?.filament_color)===s):void 0)??o[0];i[e]=c,a.add(c)}return i}function PW(e){return(e??``).trim().replace(/^#/,``).slice(0,6).toUpperCase()}function FW({printerId:e,filamentReqs:t,manualMappings:n,onManualMappingChange:r,onEstimatedCostChange:i,budgetAvailable:a,quantity:o=1,currencySymbol:s,defaultCostPerKg:c,defaultExpanded:l=!1,forceColorMatch:u,onForceColorMatchChange:d,plateLabel:f,archiveAmsMapping:p,nozzleRackChoice:m,onNozzleRackChoiceChange:h}){let{t:g}=U(),_=co(),[v,b]=(0,y.useState)(!1),[x,S]=(0,y.useState)(l),[C,w]=(0,y.useState)(!1),T=(0,y.useRef)([]);(0,y.useEffect)(()=>{w(!1),T.current=[]},[p,f,e]);let E=()=>{if(!p||!t?.filaments)return;if(C){let e={...n};for(let t of T.current)delete e[t];r(e),T.current=[],w(!1);return}let e={...n},i=[];for(let n of t.filaments){let t=n.slot_id-1;n.slot_id>0&&t>=0&&t<p.length&&p[t]>=0&&(e[n.slot_id]=p[t],i.push(n.slot_id))}r(e),T.current=i,w(!0)},{data:D}=K({queryKey:[`printer-status`,e],queryFn:()=>Z.getPrinterStatus(e),enabled:!!e}),{data:O}=K({queryKey:[`spool-assignments`,e],queryFn:()=>Z.getAssignments(e),enabled:!!e}),{data:k}=K({queryKey:[`settings`],queryFn:Z.getSettings}),{data:A}=K({queryKey:[`printer-inventory-remain`,e],queryFn:()=>Z.getInventoryRemain(e),enabled:!!e,staleTime:30*1e3,refetchOnMount:`always`}),j=(0,y.useMemo)(()=>{if(!A?.inventory_remain_g)return;let e=new Map;return Object.entries(A.inventory_remain_g).forEach(([t,n])=>{let r=Number(t);Number.isNaN(r)||e.set(r,n)}),e},[A]),M=(0,y.useMemo)(()=>{let e=A?.slot_materials;if(!e?.length)return;let t=new Map;return e.forEach(e=>{e.spool&&t.set(e.global_tray_id,e.spool)}),t.size>0?t:void 0},[A]),{loadedFilaments:N,filamentComparison:P,hasTypeMismatch:F,hasColorMismatch:I}=EW(t,D,n,zp(k?.prefer_lowest_filament,D?.ams_filament_backup),j,M),L=AW(t?.filaments),R=(0,y.useMemo)(()=>{let e=new Map;for(let t of O||[]){let n=t.ams_id===255,r=kp(t.ams_id,t.tray_id,n);e.set(r,t.spool?.cost_per_kg??null)}return e},[O]),z=(0,y.useMemo)(()=>{let e=new Map;for(let t of O||[]){let n=t.ams_id===255,r=kp(t.ams_id,t.tray_id,n),i=t.spool;if(!i){e.set(r,null);continue}e.set(r,Math.max(0,Math.round((i.label_weight??0)-(i.weight_used??0))))}return e},[O]),B=(0,y.useMemo)(()=>{let e=0;for(let t of P){let n=t.loaded?.globalTrayId;if(n==null)continue;let r=R.get(n)??null??c;r>0&&(e+=t.used_grams/1e3*r)}return e},[P,R,c]),V=(0,y.useRef)(i);(0,y.useEffect)(()=>{V.current=i},[i]),(0,y.useEffect)(()=>{V.current?.(B>0?B:null)},[B]);let ee=(0,y.useMemo)(()=>Array.from(R.values()).some(e=>e!=null&&e>0),[R]),te=B*Math.max(1,o),ne=a!=null&&te>a,re=t?.filaments&&t.filaments.length>0,ie=t?.filaments?.some(e=>e.nozzle_id!=null)??!1,ae=(0,y.useMemo)(()=>{let e=new Map;for(let n of t?.filaments??[])n.group_id!=null&&n.group&&e.set(n.group_id,n.group);return e},[t]),oe=(D?.nozzle_rack?.some(e=>e.id>=16)??!1)&&[...ae.values()].some(e=>e.on_rack),se=(0,y.useMemo)(()=>oe?MOe(D?.nozzle_rack,ae,m??{})??m??{}:{},[oe,D?.nozzle_rack,ae,m]),H=(e,t)=>{h&&h({...se,[e]:t})},ce=D?.fila_switch?.installed===!0,le=D?.ams_switch_inlet,ue=e=>ce&&le?.[String(e)]||null,de=(0,y.useMemo)(()=>{if(!ce)return null;let e=new Set;for(let t of P){if(!t.loaded||t.loaded.isExternal)return null;let n=ue(t.loaded.amsId);if(!n)return null;e.add(n)}return P.length<2||e.size!==1?null:[...e][0]},[ce,le,P]);if(!re||!D)return null;let fe=F?`#f97316`:I?`#facc15`:`#00ae42`,pe=(e,t)=>{if(e>0)if(t===``){let t={...n};delete t[e],r(t)}else r({...n,[e]:parseInt(t,10)})};return(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>S(!x),className:`flex items-center gap-2 text-sm text-bambu-gray hover:text-white transition-colors w-full`,children:[(0,G.jsx)(Os,{className:`w-4 h-4`,fill:fe,stroke:`none`}),(0,G.jsx)(`span`,{children:f?`${g(`printModal.filamentMapping`)} — ${f}`:g(`printModal.filamentMapping`)}),F?(0,G.jsxs)(`span`,{className:`text-xs text-orange-700 dark:text-orange-400`,children:[`(`,g(`printModal.statusTypeNotFound`),`)`]}):I?(0,G.jsxs)(`span`,{className:`text-xs text-yellow-700 dark:text-yellow-400`,children:[`(`,g(`printModal.statusColorMismatch`),`)`]}):(0,G.jsxs)(`span`,{className:`text-xs text-bambu-green`,children:[`(`,g(`printModal.statusReady`),`)`]}),x?(0,G.jsx)(gs,{className:`w-4 h-4 ml-auto`}):(0,G.jsx)(ps,{className:`w-4 h-4 ml-auto`})]}),x&&(0,G.jsxs)(`div`,{className:`mt-2 bg-bambu-dark rounded-lg p-3 space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:g(`printModal.clickToChangeSlot`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[p&&(0,G.jsxs)(`button`,{type:`button`,onClick:E,title:g(`printModal.useArchiveMappingTooltip`),className:`flex items-center gap-1 px-2 py-0.5 text-xs rounded border transition-colors ${C?`border-bambu-green bg-bambu-green/10 text-bambu-green`:`border-bambu-gray/30 hover:border-bambu-gray hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(fs,{className:`w-3 h-3`}),(0,G.jsx)(`span`,{children:g(`printModal.useArchiveMapping`)})]}),(0,G.jsxs)(`button`,{type:`button`,onClick:async()=>{b(!0);try{await Z.refreshPrinterStatus(e),await new Promise(e=>setTimeout(e,500)),await _.refetchQueries({queryKey:[`printer-status`,e]})}finally{b(!1)}},className:`flex items-center gap-1 px-2 py-0.5 text-xs rounded border border-bambu-gray/30 hover:border-bambu-gray hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray hover:text-white`,disabled:v,children:[(0,G.jsx)(Vl,{className:`w-3 h-3 ${v?`animate-spin`:``}`}),(0,G.jsx)(`span`,{children:g(`printModal.reRead`)})]})]})]}),de&&(0,G.jsxs)(`div`,{className:`flex items-start gap-1.5 rounded border border-yellow-500/40 bg-yellow-500/10 px-2 py-1.5 text-xs text-yellow-700 dark:text-yellow-400`,children:[(0,G.jsx)(Iu,{className:`w-3 h-3 mt-0.5 shrink-0`}),(0,G.jsx)(`span`,{children:g(`printModal.ftsSameInletHint`,{inlet:de})})]}),P.map((e,t)=>{let n=e.slot_id??0,r=n>0&&d!=null,{resolvedName:i,colorLabel:a}=L[t]??{resolvedName:e.type,colorLabel:Tf(e.color)},[o,s]=nee({name:a,hex:e.color},{name:e.loaded?.colorName,hex:e.loaded?.color});return(0,G.jsxs)(`div`,{className:`space-y-1`,children:[(0,G.jsxs)(`div`,{className:`grid items-center gap-2 text-xs`,style:{gridTemplateColumns:oe?`16px minmax(210px, 1.4fr) auto 2fr 16px`:`16px minmax(70px, 1fr) auto 2fr 16px`},children:[(0,G.jsx)(`span`,{title:g(`printModal.requiredTooltip`,{name:i,color:o}),children:(0,G.jsx)(Os,{className:`w-3 h-3`,fill:e.color,stroke:e.color})}),(0,G.jsxs)(`span`,{className:`text-white flex items-center gap-1 min-w-0`,children:[oe&&e.group_id!=null&&e.group?e.group.on_rack?(0,G.jsx)(`select`,{value:se[e.group_id]??``,onChange:t=>H(e.group_id,Number(t.target.value)),disabled:!h,title:g(`printModal.rackPositionTooltip`),"aria-label":g(`printModal.rackPosition`),className:`shrink-0 bg-bambu-dark-tertiary text-white text-[10px] font-bold rounded px-1 py-0.5 border border-bambu-dark-tertiary focus:border-bambu-green outline-none disabled:opacity-60`,children:jOe(D?.nozzle_rack,e.group,g).map(e=>(0,G.jsxs)(`option`,{value:e.position,disabled:!e.eligible,title:e.reason,children:[`R`,e.position,e.diameter?` · ${e.diameter}`:``]},e.position))}):(0,G.jsx)(`span`,{className:`inline-flex items-center justify-center w-3.5 h-3.5 rounded text-[9px] font-bold leading-none bg-bambu-gray/20 text-bambu-gray shrink-0`,title:g(`printModal.leftNozzleTooltip`),children:g(`printModal.leftNozzle`)}):ie&&e.nozzle_id!=null?(0,G.jsx)(`span`,{className:`inline-flex items-center justify-center w-3.5 h-3.5 rounded text-[9px] font-bold leading-none bg-bambu-gray/20 text-bambu-gray shrink-0`,title:e.nozzle_id===1?g(`printModal.leftNozzleTooltip`):g(`printModal.rightNozzleTooltip`),children:e.nozzle_id===1?g(`printModal.leftNozzle`):g(`printModal.rightNozzle`)}):null,(0,G.jsx)(`span`,{className:`truncate min-w-0`,title:i,children:i}),(0,G.jsxs)(`span`,{className:`text-bambu-gray shrink-0 whitespace-nowrap`,children:[`(`,e.used_grams,`g)`]})]}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`→`}),(0,G.jsxs)(`select`,{value:e.loaded?.globalTrayId??``,onChange:e=>pe(n,e.target.value),className:`flex-1 px-2 py-1 rounded border text-xs bg-bambu-dark-secondary focus:outline-none focus:ring-1 focus:ring-bambu-green ${e.status===`match`?`border-bambu-green/50 text-bambu-green`:e.status===`type_only`?`border-yellow-500 dark:border-yellow-400/50 text-yellow-700 dark:text-yellow-400`:`border-orange-500 dark:border-orange-400/50 text-orange-700 dark:text-orange-400`} ${e.isManual?`ring-1 ring-blue-400/50`:``}`,title:e.isManual?g(`printModal.manuallySelected`):g(`printModal.autoMatched`),children:[(0,G.jsxs)(`option`,{value:``,className:`bg-bambu-dark text-bambu-gray`,children:[`-- `,g(`printModal.selectSlot`),` --`]}),N.map(e=>{let t=z.get(e.globalTrayId),n=t==null?``:g(`printModal.slotRemainingShort`,{grams:t,defaultValue:` - ${t}g left`}),r=ue(e.amsId),i=r==null?``:` [${pp[r]}]`;return(0,G.jsxs)(`option`,{value:e.globalTrayId,className:`bg-bambu-dark text-white`,children:[e.label,`: `,e.spoolName||e.traySubBrands||e.type,` (`,e.colorName,`)`,n,i]},e.globalTrayId)})]}),e.status===`match`?(0,G.jsx)(fs,{className:`w-3 h-3 text-bambu-green`}):e.status===`type_only`?(0,G.jsx)(`span`,{title:o&&s?g(`printModal.sameTypeDifferentColorDetail`,{required:o,loaded:s}):g(`printModal.sameTypeDifferentColor`),children:(0,G.jsx)(Iu,{className:`w-3 h-3 text-yellow-600 dark:text-yellow-400`})}):(0,G.jsx)(`span`,{title:g(`printModal.filamentTypeNotLoaded`),children:(0,G.jsx)(Iu,{className:`w-3 h-3 text-orange-600 dark:text-orange-400`})})]}),r&&(0,G.jsxs)(`label`,{className:`inline-flex items-center gap-1.5 text-xs text-bambu-gray cursor-pointer select-none pl-5`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:u?.[n]??!1,onChange:e=>d(n,e.target.checked),className:`accent-bambu-green w-3 h-3`}),(0,G.jsx)(Cl,{className:`w-3 h-3`}),g(`printModal.forceColorMatch`)]})]},t)}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray`,children:[g(`printModal.totalCost`),` `,(0,G.jsx)(`span`,{className:`text-white`,children:B>0||ee?`${s}${B.toFixed(2)}`:`N/A`}),o>1&&B>0&&(0,G.jsx)(`span`,{className:`ml-2`,children:g(`printModal.totalCostForQuantity`,`total: {{cost}}`,{cost:`${s}${te.toFixed(2)}`})})]}),ne&&(0,G.jsx)(`p`,{className:`text-xs text-red-400 mt-2`,children:g(`printModal.insufficientBudget`,`Insufficient budget for this cost center.`)}),F&&(0,G.jsx)(`p`,{className:`text-xs text-orange-700 dark:text-orange-400 mt-2`,children:g(`printModal.requiredTypeNotInPrinter`)})]})]})}function IW({filamentReqs:e,availableFilaments:t,overrides:n,onChange:r,forceColorMatch:i,onForceColorMatchChange:a,plateLabel:o,showHint:s=!0}){let{t:c}=U(),l=AW(e?.filaments),u=(0,y.useMemo)(()=>{let e={};for(let n of t){let t=yp(n.type);e[t]||(e[t]=[]),e[t].push(n)}return e},[t]),d=e?.filaments;if(!d||d.length===0||t.length===0)return null;let f=(e,t)=>{if(t===``){let t={...n};delete t[e],r(t)}else{let[i,a]=t.split(`|`);r({...n,[e]:{type:i,color:a}})}};return(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsx)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray mb-2`,children:(0,G.jsx)(`span`,{children:o?`${c(`printModal.filamentOverride`)} — ${o}`:c(`printModal.filamentOverride`)})}),s&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:c(`printModal.filamentOverrideHint`)}),(0,G.jsx)(`div`,{className:`bg-bambu-dark rounded-lg p-3 space-y-2`,children:d.map((e,t)=>{let r=n[e.slot_id],o=!!r,s=u[yp(e.type)]||[],d=e.nozzle_id==null?s:s.filter(t=>t.extruder_id==null||t.extruder_id===e.nozzle_id),{resolvedName:p,colorLabel:m}=l[t]??{resolvedName:e.type,colorLabel:Tf(e.color)};return(0,G.jsxs)(`div`,{className:`space-y-1`,children:[(0,G.jsxs)(`div`,{className:`grid items-center gap-2 text-xs`,style:{gridTemplateColumns:`16px minmax(70px, 1fr) auto 2fr 20px`},children:[(0,G.jsx)(`span`,{title:`${c(`printModal.originalFilament`)}: ${p} - ${m}`,children:(0,G.jsx)(Os,{className:`w-3 h-3`,fill:e.color,stroke:e.color})}),(0,G.jsxs)(`span`,{className:`text-white truncate`,children:[p,` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[`(`,e.used_grams,`g)`]})]}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`→`}),(0,G.jsxs)(`select`,{value:o?`${r.type}|${r.color}`:``,onChange:t=>f(e.slot_id,t.target.value),disabled:d.length===0,className:`flex-1 px-2 py-1 rounded border text-xs bg-bambu-dark-secondary focus:outline-none focus:ring-1 focus:ring-bambu-green ${o?`border-blue-500/50 dark:border-blue-400/50 text-blue-700 dark:text-blue-400`:`border-bambu-gray/30 text-bambu-gray`}`,children:[(0,G.jsxs)(`option`,{value:``,className:`bg-bambu-dark text-bambu-gray`,children:[c(`printModal.originalFilament`),`: `,p,` (`,m,`)`]}),d.map((e,t)=>(0,G.jsxs)(`option`,{value:`${e.type}|${e.color}`,className:`bg-bambu-dark text-white`,children:[e.tray_sub_brands||e.type,` (`,Tf(e.color,e.tray_sub_brands),`)`]},`${e.type}-${e.color}-${e.tray_sub_brands}-${t}`))]}),o?(0,G.jsx)(`button`,{type:`button`,onClick:()=>f(e.slot_id,``),className:`text-bambu-gray hover:text-white transition-colors`,title:c(`printModal.resetToOriginal`),children:(0,G.jsx)(Ul,{className:`w-3 h-3`})}):(0,G.jsx)(`span`,{className:`w-3`})]}),(0,G.jsxs)(`label`,{className:`inline-flex items-center gap-1.5 text-xs text-bambu-gray cursor-pointer select-none pl-5`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:i?.[e.slot_id]??!1,onChange:t=>a?.(e.slot_id,t.target.checked),className:`accent-bambu-green w-3 h-3`}),(0,G.jsx)(Cl,{className:`w-3 h-3`}),c(`printModal.forceColorMatch`)]})]},e.slot_id)})})]})}function NOe({plates:e,isMultiPlate:t,selectedPlates:n,onToggle:r,onSelectAll:i,onDeselectAll:a,multiSelect:o,quantities:s,onQuantityChange:c}){let{t:l}=U();if(!t||e.length<=1)return null;let u=n.size===e.length,d=!!s&&!!c,f=d?e.reduce((e,t)=>n.has(t.index)?e+(s[t.index]??1):e,0):0;return(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-2`,children:[(0,G.jsx)(qc,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[`Select Plate`,o?`s`:``,` to Print`]}),n.size===0&&(0,G.jsxs)(`span`,{className:`text-xs text-orange-700 dark:text-orange-400 flex items-center gap-1`,children:[(0,G.jsx)(Iu,{className:`w-3 h-3`}),`Selection required`]}),o&&i&&a&&(0,G.jsx)(`button`,{type:`button`,onClick:u?a:i,className:`ml-auto text-xs px-2 py-0.5 rounded-full border transition-colors ${u?`border-bambu-green bg-bambu-green/10 text-bambu-green`:`border-bambu-dark-tertiary text-bambu-gray hover:border-bambu-gray`}`,children:u?l(`queue.deselectAll`):l(`queue.selectAllPlates`,{count:e.length})})]}),(0,G.jsx)(`div`,{className:`grid grid-cols-2 gap-2`,children:e.map(e=>{let t=n.has(e.index);return(0,G.jsxs)(`div`,{className:`flex items-center gap-2 p-2 rounded-lg border transition-colors ${t?`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary bg-bambu-dark hover:border-bambu-gray`}`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>r(e.index),className:`flex items-center gap-2 text-left min-w-0 flex-1`,children:[o&&(t?(0,G.jsx)(_u,{className:`w-4 h-4 text-bambu-green flex-shrink-0`}):(0,G.jsx)(yu,{className:`w-4 h-4 text-bambu-gray flex-shrink-0`})),e.has_thumbnail&&e.thumbnail_url!=null?(0,G.jsx)(`img`,{src:_d(e.thumbnail_url),alt:`Plate ${e.index}`,className:`w-10 h-10 rounded object-cover bg-bambu-dark-tertiary`}):(0,G.jsx)(`div`,{className:`w-10 h-10 rounded bg-bambu-dark-tertiary flex items-center justify-center`,children:(0,G.jsx)(qc,{className:`w-5 h-5 text-bambu-gray`})}),(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white font-medium truncate`,children:e.name||`Plate ${e.index}`}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray truncate`,children:[e.objects.length>0?e.objects.slice(0,3).join(`, `)+(e.objects.length>3?`...`:``):`${e.filaments.length} filament${e.filaments.length===1?``:`s`}`,e.print_time_seconds==null?``:` • ${op(e.print_time_seconds)}`]}),(()=>{let t=kW(e.bed_type);return t?(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray flex items-center gap-1 mt-0.5 truncate`,title:t.label,children:[(0,G.jsx)(`img`,{src:t.icon,alt:``,className:`w-3.5 h-3.5 object-contain flex-shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,children:t.label})]}):null})()]}),!o&&t&&(0,G.jsx)(fs,{className:`w-4 h-4 text-bambu-green flex-shrink-0`})]}),d&&t&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1 flex-shrink-0`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,"aria-hidden":`true`,children:`×`}),(0,G.jsx)(`input`,{type:`number`,min:1,max:999,value:s[e.index]??1,"aria-label":l(`queue.plateQuantityLabel`,{plate:e.name||l(`queue.plateNumber`,{index:e.index})}),onChange:t=>c(e.index,Math.max(1,Math.min(999,parseInt(t.target.value)||1))),className:`w-14 px-1.5 py-1 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-center focus:outline-none focus:ring-1 focus:ring-bambu-green`})]})]},e.index)})}),d&&f>n.size&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-2`,children:l(`queue.plateQuantityTotal`,{count:f})})]})}var POe=new Set([`IDLE`,`FINISH`,`FAILED`]);function FOe({printerResult:e,filamentReqs:t,onUpdateConfig:n}){let r=co(),[i,a]=(0,y.useState)(!1),o=(t,r)=>{if(t<=0)return;let i={...e.config.manualMappings};r===``?delete i[t]:i[t]=parseInt(r,10),n({useDefault:!1,manualMappings:i,autoConfigured:!1})},s=async()=>{a(!0);try{await Z.refreshPrinterStatus(e.printerId),await new Promise(e=>setTimeout(e,500)),await r.refetchQueries({queryKey:[`printer-status`,e.printerId]})}finally{a(!1)}},c=t.map(t=>{let n=t.slot_id||0,i=e.config.manualMappings[n],a,o=!1;if(i!==void 0)a=e.loadedFilaments.find(e=>e.globalTrayId===i),o=!0;else{let n=new Set(Object.values(e.config.manualMappings)),i=r.getQueryData([`settings`]);a=ree(t,e.loadedFilaments,n,zp(i?.prefer_lowest_filament,e.status?.ams_filament_backup),e.inventoryByTrayId)}let s=`mismatch`;if(a){let e=bp(a.type,t.type),n=fp(a.color)===fp(t.color)||xp(a.color,t.color);e&&n?s=`match`:e&&(s=`type_only`)}return{req:t,loaded:a,status:s,isManual:o}});return(0,G.jsxs)(`div`,{className:`mt-2 bg-bambu-dark rounded-lg p-3 space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`Custom slot mapping`}),(0,G.jsxs)(`button`,{type:`button`,onClick:s,className:`flex items-center gap-1 px-2 py-0.5 text-xs rounded border border-bambu-gray/30 hover:border-bambu-gray hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray hover:text-white`,disabled:i,children:[(0,G.jsx)(Vl,{className:`w-3 h-3 ${i?`animate-spin`:``}`}),(0,G.jsx)(`span`,{children:`Re-read`})]})]}),c.map(({req:t,loaded:n,status:r,isManual:i},a)=>(0,G.jsxs)(`div`,{className:`grid items-center gap-2 text-xs`,style:{gridTemplateColumns:`16px minmax(70px, 1fr) auto 2fr 16px`},children:[(0,G.jsx)(`span`,{title:`Required: ${t.type} - ${Tf(t.color)}`,children:(0,G.jsx)(Os,{className:`w-3 h-3`,fill:t.color,stroke:t.color})}),(0,G.jsxs)(`span`,{className:`text-white flex items-center gap-1 min-w-0`,children:[(0,G.jsx)(`span`,{className:`truncate min-w-0`,title:t.type,children:t.type}),(0,G.jsxs)(`span`,{className:`text-bambu-gray shrink-0 whitespace-nowrap`,children:[`(`,t.used_grams,`g)`]})]}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`→`}),(0,G.jsxs)(`select`,{value:n?.globalTrayId??``,onChange:e=>o(t.slot_id||0,e.target.value),className:`flex-1 px-2 py-1 rounded border text-xs bg-bambu-dark-secondary focus:outline-none focus:ring-1 focus:ring-bambu-green ${r===`match`?`border-bambu-green/50 text-bambu-green`:r===`type_only`?`border-yellow-500 dark:border-yellow-400/50 text-yellow-700 dark:text-yellow-400`:`border-orange-500 dark:border-orange-400/50 text-orange-700 dark:text-orange-400`} ${i?`ring-1 ring-blue-400/50`:``}`,title:i?`Manually selected`:`Auto-matched`,children:[(0,G.jsx)(`option`,{value:``,className:`bg-bambu-dark text-bambu-gray`,children:`-- Select slot --`}),iee(e.loadedFilaments,t.nozzle_id).map(e=>(0,G.jsxs)(`option`,{value:e.globalTrayId,className:`bg-bambu-dark text-white`,children:[e.label,`: `,e.traySubBrands||e.type,` (`,e.colorName,`)`]},e.globalTrayId))]}),r===`match`?(0,G.jsx)(fs,{className:`w-3 h-3 text-bambu-green`}):r===`type_only`?(0,G.jsx)(`span`,{title:`Same type, different color`,children:(0,G.jsx)(Iu,{className:`w-3 h-3 text-yellow-600 dark:text-yellow-400`})}):(0,G.jsx)(`span`,{title:`Filament type not loaded`,children:(0,G.jsx)(Iu,{className:`w-3 h-3 text-orange-600 dark:text-orange-400`})})]},a))]})}function IOe({printers:e,selectedPrinterIds:t,onMultiSelect:n,isLoading:r=!1,allowMultiple:i=!1,showInactive:a=!1,disableBusy:o=!1,printerMappingResults:s,filamentReqs:c,onAutoConfigurePrinter:l,onUpdatePrinterConfig:u,assignmentMode:d=`printer`,onAssignmentModeChange:f,targetModel:p,onTargetModelChange:m,targetLocation:h,onTargetLocationChange:g,slicedForModel:_}){let[v,b]=(0,y.useState)(!1),x=a?e:e.filter(e=>e.is_active),S=Co({queries:x.map(e=>({queryKey:[`printerStatus`,e.id],queryFn:()=>Z.getPrinterStatus(e.id),staleTime:5e3}))}),C=(0,y.useMemo)(()=>{let e=new Map;return x.forEach((t,n)=>{let r=S[n];r?.data&&e.set(t.id,r.data)}),e},[x,S]),w=e=>{let t=C.get(e);return t?t.connected?!POe.has(t.state??``):!0:!1},T=e=>{let t=C.get(e);if(!t)return null;if(!t.connected)return`Offline`;let n=t.state;return n?n===`RUNNING`?t.stg_cur_name||`Printing`:n===`PREPARE`?`Preparing`:n===`PAUSE`?`Paused`:n===`IDLE`?`Idle`:n===`FINISH`?`Finished`:n===`FAILED`?`Failed`:n:null},E=(0,y.useMemo)(()=>{if(d!==`printer`||!_||v)return x;let e=x.filter(e=>e.model===_);return e.length>0?e:x},[x,d,_,v]),D=x.length-E.length,O=(0,y.useMemo)(()=>{let e=x.map(e=>e.model).filter(e=>!!e);return[...new Set(e)].sort()},[x]),k=(0,y.useMemo)(()=>{if(!p)return[];let e=x.filter(e=>e.model===p&&e.location).map(e=>e.location).filter(e=>!!e);return[...new Set(e)].sort()},[x,p]),A=f&&m&&O.length>0,j=i&&t.length>1&&s&&c?.filaments&&c.filaments.length>0&&l&&u;if(r)return(0,G.jsx)(`div`,{className:`flex justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})});if(E.length===0)return(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-red-700 dark:text-red-400 text-sm mb-4`,children:[(0,G.jsx)(ys,{className:`w-4 h-4`}),`No `,a?``:`active `,`printers available`]});let M=e=>{o&&w(e)||(i?t.includes(e)?n(t.filter(t=>t!==e)):n([...t,e]):n([e]))},N=()=>{n((o?E.filter(e=>!w(e.id)):E).map(e=>e.id))},P=()=>{n([])},F=(e,t,n)=>{n.stopPropagation(),!(!l||!u)&&(t?l(e):u(e,{useDefault:!0,manualMappings:{},autoConfigured:!1}))},I=e=>t.includes(e),L=t.length,R=e=>s?.find(t=>t.printerId===e);return(0,G.jsxs)(`div`,{className:`space-y-2 mb-6`,children:[A&&(0,G.jsxs)(`div`,{className:`flex gap-2 mb-4`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{f(`printer`),m(null)},className:`flex-1 flex items-center justify-center gap-2 px-3 py-2 rounded-lg border transition-colors ${d===`printer`?`border-bambu-green bg-bambu-green/10 text-white`:`border-bambu-dark-tertiary bg-bambu-dark text-bambu-gray hover:border-bambu-gray`}`,children:[(0,G.jsx)(Ll,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-sm`,children:`Specific Printer`})]}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{f(`model`),n([]),m(_&&O.includes(_)?_:null)},className:`flex-1 flex items-center justify-center gap-2 px-3 py-2 rounded-lg border transition-colors ${d===`model`?`border-bambu-green bg-bambu-green/10 text-white`:`border-bambu-dark-tertiary bg-bambu-dark text-bambu-gray hover:border-bambu-gray`}`,children:[(0,G.jsx)(Hu,{className:`w-4 h-4`}),(0,G.jsxs)(`span`,{className:`text-sm`,children:[`Any `,(d===`model`?p:null)||_||`Model`]})]})]}),d===`model`&&A&&(0,G.jsxs)(`div`,{className:`space-y-3 mb-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:[`Target Model`,_&&(0,G.jsxs)(`span`,{className:`ml-2 text-bambu-gray/70`,children:[`(sliced for `,_,`)`]})]}),(0,G.jsxs)(`select`,{value:p||``,onChange:e=>{m(e.target.value||null),g&&g(null)},className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,children:[(0,G.jsx)(`option`,{value:``,children:`Select a model...`}),O.map(e=>{let t=gm(_,e);return(0,G.jsxs)(`option`,{value:e,disabled:!t,children:[e,t?``:` — incompatible with ${_} G-code`]},e)})]})]}),_&&p&&p!==_&&(gm(_,p)?(0,G.jsxs)(`div`,{className:`p-3 bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30 rounded-lg flex items-center gap-2`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-600 dark:text-yellow-400 flex-shrink-0`}),(0,G.jsxs)(`span`,{className:`text-sm text-yellow-700 dark:text-yellow-400`,children:[`File was sliced for `,_,`, but will be dispatched to a `,p,` printer`]})]}):(0,G.jsxs)(`div`,{className:`p-3 bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 rounded-lg flex items-center gap-2`,children:[(0,G.jsx)(ys,{className:`w-4 h-4 text-red-600 dark:text-red-400 flex-shrink-0`}),(0,G.jsxs)(`span`,{className:`text-sm text-red-700 dark:text-red-400`,children:[`File was sliced for `,_,` and cannot be dispatched to `,p,` printers — select a compatible model`]})]})),p&&k.length>0&&g&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:`Location Filter (optional)`}),(0,G.jsxs)(`select`,{value:h||``,onChange:e=>g(e.target.value||null),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,children:[(0,G.jsx)(`option`,{value:``,children:`Any location`}),k.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]})]}),p&&(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[`Scheduler will assign to first available idle `,p,` printer`,h?` in ${h}`:``]})]}),d===`printer`&&i&&E.length>1&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-xs text-bambu-gray mb-2`,children:[(0,G.jsx)(`span`,{children:L===0?`Select printers`:`${L} printer${L===1?``:`s`} selected`}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[L<E.length&&(0,G.jsx)(`button`,{type:`button`,onClick:N,className:`text-bambu-green hover:text-bambu-green/80 transition-colors`,children:`Select all`}),L>0&&(0,G.jsx)(`button`,{type:`button`,onClick:P,className:`text-bambu-gray hover:text-white transition-colors`,children:`Clear`})]})]}),d===`printer`&&E.map(e=>{let t=I(e.id),n=R(e.id),r=n&&!n.config.useDefault,a=w(e.id),s=o&&a,d=T(e.id);return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>M(e.id),disabled:s,className:`w-full flex items-center gap-3 p-3 rounded-lg border transition-colors ${s?`border-bambu-dark-tertiary bg-bambu-dark opacity-50 cursor-not-allowed`:t?`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary bg-bambu-dark hover:border-bambu-gray`} ${e.is_active?``:`opacity-60`}`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg ${s?`bg-bambu-dark-tertiary`:t?`bg-bambu-green/20`:`bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(Ll,{className:`w-5 h-5 ${s?`text-bambu-gray/50`:t?`text-bambu-green`:`text-bambu-gray`}`})}),(0,G.jsxs)(`div`,{className:`text-left flex-1`,children:[(0,G.jsxs)(`p`,{className:`font-medium ${s?`text-bambu-gray`:`text-white`}`,children:[e.name,!e.is_active&&(0,G.jsx)(`span`,{className:`text-bambu-gray text-xs ml-2`,children:`(inactive)`})]}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[e.model||`Unknown model`,` • `,e.ip_address]})]}),d&&(0,G.jsx)(`span`,{className:`text-xs px-2 py-0.5 rounded-full ${a?`bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`:`bg-bambu-green/20 text-bambu-green`}`,children:d}),i&&(0,G.jsx)(`div`,{className:`w-5 h-5 rounded border-2 flex items-center justify-center transition-colors ${s?`border-bambu-gray/30`:t?`bg-bambu-green border-bambu-green`:`border-bambu-gray/50`}`,children:t&&(0,G.jsx)(fs,{className:`w-3 h-3 text-white`})})]}),t&&j&&n&&(0,G.jsxs)(`div`,{className:`ml-4 mt-2 mb-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`label`,{className:`flex items-center gap-2 cursor-pointer`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:r,onChange:t=>F(e.id,t.target.checked,t),className:`w-3.5 h-3.5 rounded border-bambu-gray/30 bg-bambu-dark-secondary text-bambu-green focus:ring-bambu-green focus:ring-offset-0`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`Custom mapping`})]}),(0,G.jsxs)(`span`,{className:`text-xs ml-2 ${n.matchStatus===`full`?`text-bambu-green`:n.matchStatus===`partial`?`text-yellow-700 dark:text-yellow-400`:`text-orange-700 dark:text-orange-400`}`,children:[`(`,n.exactMatches,`/`,n.totalSlots,` matched)`]}),n.isLoading&&(0,G.jsx)(Vl,{className:`w-3 h-3 text-bambu-gray animate-spin`}),r&&(0,G.jsxs)(`button`,{type:`button`,onClick:t=>{t.stopPropagation(),l(e.id)},className:`ml-auto flex items-center gap-1 px-2 py-0.5 text-xs rounded border border-bambu-gray/30 hover:border-bambu-gray hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray hover:text-white`,children:[(0,G.jsx)(Ju,{className:`w-3 h-3`}),`Auto`]})]}),r&&(0,G.jsx)(FOe,{printerResult:n,filamentReqs:c.filaments,onUpdateConfig:t=>u(e.id,t)})]})]},e.id)}),d===`printer`&&D>0&&!v&&(0,G.jsxs)(`button`,{type:`button`,onClick:()=>b(!0),className:`text-xs text-bambu-gray hover:text-white transition-colors mt-2 flex items-center gap-1`,children:[(0,G.jsx)(Iu,{className:`w-3 h-3 text-yellow-600 dark:text-yellow-400`}),D,` other printer`,D>1?`s`:``,` hidden (different model) —`,(0,G.jsx)(`span`,{className:`underline`,children:`show all`})]}),d===`printer`&&v&&_&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>b(!1),className:`text-xs text-bambu-gray hover:text-white transition-colors mt-2`,children:(0,G.jsxs)(`span`,{className:`underline`,children:[`Show only `,_,` printers`]})}),d===`printer`&&L===0&&(0,G.jsxs)(`p`,{className:`text-xs text-orange-700 dark:text-orange-400 mt-1 flex items-center gap-1`,children:[(0,G.jsx)(ys,{className:`w-3 h-3`}),`Select at least one printer`]}),d===`model`&&!p&&(0,G.jsxs)(`p`,{className:`text-xs text-orange-700 dark:text-orange-400 mt-1 flex items-center gap-1`,children:[(0,G.jsx)(ys,{className:`w-3 h-3`}),`Select a target printer model`]})]})}var LW=[`off`,`auto`,`on`],RW={off:`bg-red-500 text-white`,auto:`bg-blue-500 text-white`,on:`bg-bambu-green text-white`},LOe=[`off`,`on`];function ROe({options:e,onChange:t,defaultExpanded:n=!1,showDualNozzleOptions:r=!1}){let{t:i}=U(),[a,o]=(0,y.useState)(n),s=[{key:`bed_levelling`,label:i(`settings.defaultBedLevelling`),desc:i(`settings.defaultBedLevellingDesc`),tristate:!0},{key:`flow_cali`,label:i(`settings.defaultFlowCali`),desc:i(`settings.defaultFlowCaliDesc`),tristate:!0},{key:`vibration_cali`,label:i(`settings.defaultVibrationCali`),desc:i(`settings.defaultVibrationCaliDesc`)},{key:`layer_inspect`,label:i(`settings.defaultLayerInspect`),desc:i(`settings.defaultLayerInspectDesc`)},{key:`timelapse`,label:i(`settings.defaultTimelapse`),desc:i(`settings.defaultTimelapseDesc`)},{key:`nozzle_offset_cali`,label:i(`settings.defaultNozzleOffsetCali`),desc:i(`settings.defaultNozzleOffsetCaliDesc`),dualNozzleOnly:!0,tristate:!0}].filter(e=>!e.dualNozzleOnly||r),c=(n,r)=>{t({...e,[n]:r})},l=(n,r)=>{t({...e,[n]:r})},u=n=>{t({...e,preheat_override:n,...n===`off`?{preheat_chamber_target_override:null}:{}})},d=n=>{if(n===``){t({...e,preheat_chamber_target_override:null});return}let r=parseInt(n,10);Number.isNaN(r)||t({...e,preheat_chamber_target_override:Math.max(0,Math.min(65,r))})};return(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>o(!a),className:`flex items-center gap-2 text-sm text-bambu-gray hover:text-white transition-colors w-full`,children:[(0,G.jsx)(nu,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:i(`queue.bulkEdit.printOptions`)}),a?(0,G.jsx)(gs,{className:`w-4 h-4 ml-auto`}):(0,G.jsx)(ps,{className:`w-4 h-4 ml-auto`})]}),a&&(0,G.jsxs)(`div`,{className:`mt-2 bg-bambu-dark rounded-lg p-3 space-y-2`,children:[s.map(({key:t,label:n,desc:r,tristate:a})=>a?(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:r})]}),(0,G.jsx)(`div`,{className:`flex gap-1 shrink-0`,children:LW.map(n=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>l(t,n),className:`px-2.5 py-1 text-xs rounded transition-colors ${e[t]===n?RW[n]:`bg-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,children:i(`settings.calibrationMode_${n}`)},n))})]},t):(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:r})]}),(0,G.jsx)(`div`,{className:`flex gap-1 shrink-0`,children:LOe.map(n=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>c(t,n===`on`),className:`px-2.5 py-1 text-xs rounded transition-colors ${(e[t]?`on`:`off`)===n?RW[n]:`bg-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,children:i(`settings.calibrationMode_${n}`)},n))})]},t)),(0,G.jsxs)(`div`,{className:`pt-2 mt-1 border-t border-bambu-dark-tertiary/60`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1.5`,children:[(0,G.jsx)(mc,{className:`w-3.5 h-3.5 text-amber-600 dark:text-amber-400`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:i(`settings.preheatTitle`,`Preheat & Heat Soak`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:i(`settings.preheatPerItemDesc`,`Heat the bed and chamber before this print starts. Defaults to the global Settings → Workflow toggle.`)}),(0,G.jsx)(`div`,{className:`flex gap-1.5 mb-2`,children:[`inherit`,`on`,`off`].map(t=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>u(t),className:`flex-1 px-2 py-1.5 text-xs rounded transition-colors ${e.preheat_override===t?`bg-bambu-green text-white`:`bg-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,children:i(`settings.preheatOverride_${t}`,t===`inherit`?`Inherit`:t===`on`?`On`:`Off`)},t))}),e.preheat_override!==`off`&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray flex-1`,children:i(`settings.preheatTargetOverride`,`Chamber target override (°C, blank = filament default)`)}),(0,G.jsx)(`input`,{type:`number`,min:0,max:65,step:1,value:e.preheat_chamber_target_override??``,onChange:e=>d(e.target.value),placeholder:`—`,className:`w-16 px-2 py-1 bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded text-white text-xs text-right focus:outline-none focus:border-bambu-green`})]}),e.preheat_override!==`off`&&(0,G.jsx)(`p`,{className:`text-[11px] text-bambu-gray mt-1`,children:i(`settings.preheatTargetOverrideHelp`,`0 heats the bed and runs the soak without the chamber. Leave blank and a print with no chamber requirement skips preheat entirely.`)})]})]})]})}function zOe({options:e,onChange:t,dateFormat:n=`system`,timeFormat:r=`system`,canControlPrinter:i=!0,showStagger:a=!1,printerCount:o=0,hasGcodeSnippets:s=!1}){let{t:c}=U(),[l,u]=(0,y.useState)(``),[d,f]=(0,y.useState)(``),[p,m]=(0,y.useState)(!0),[h,g]=(0,y.useState)(!0),_=(0,y.useRef)(null),v=(0,y.useRef)(!1);(0,y.useEffect)(()=>{if(e.scheduleType!==`scheduled`){v.current=!1;return}if(!v.current){v.current=!0;let i;e.scheduledTime?(i=new Date(e.scheduledTime),isNaN(i.getTime())&&(i=new Date,i.setHours(i.getHours()+1,0,0,0))):(i=new Date,i.setHours(i.getHours()+1,0,0,0),t({...e,scheduledTime:Qf(i)})),u(Kf(i,n)),f(qf(i,r)),m(!0),g(!0)}},[e.scheduleType,e.scheduledTime,n,r,t,e]);let b=n=>{t({...e,scheduleType:n,requireManualStart:n===`queue`?e.requireManualStart:!1})},x=(r,i)=>{let a=Xf(r,n),o=Zf(i);m(!!a),g(!!o),a&&o&&(a.setHours(o.hours,o.minutes,0,0),a>new Date&&t({...e,scheduledTime:Qf(a)}))},S=e=>{u(e),x(e,d)},C=e=>{f(e),x(l,e)};return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-2`,children:c(`printModal.whenToPrint`)}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(`button`,{type:`button`,className:`flex-1 px-2 py-2 rounded-lg border text-sm flex items-center justify-center gap-1.5 transition-colors ${e.scheduleType===`asap`?`bg-bambu-green border-bambu-green text-white`:`bg-bambu-dark border-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,onClick:()=>b(`asap`),children:[(0,G.jsx)(js,{className:`w-4 h-4`}),c(`printModal.asap`)]}),(0,G.jsxs)(`button`,{type:`button`,className:`flex-1 px-2 py-2 rounded-lg border text-sm flex items-center justify-center gap-1.5 transition-colors ${e.scheduleType===`queue`?`bg-bambu-green border-bambu-green text-white`:`bg-bambu-dark border-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,onClick:()=>b(`queue`),children:[(0,G.jsx)(Zc,{className:`w-4 h-4`}),c(`printModal.queue`)]}),(0,G.jsxs)(`button`,{type:`button`,className:`flex-1 px-2 py-2 rounded-lg border text-sm flex items-center justify-center gap-1.5 transition-colors ${e.scheduleType===`scheduled`?`bg-bambu-green border-bambu-green text-white`:`bg-bambu-dark border-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,onClick:()=>b(`scheduled`),children:[(0,G.jsx)(as,{className:`w-4 h-4`}),c(`printModal.schedule`)]})]})]}),e.scheduleType===`scheduled`&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:c(`printModal.dateTime`)}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex-1 relative`,children:[(0,G.jsx)(`input`,{type:`text`,className:`w-full px-3 py-2 pr-10 bg-bambu-dark border rounded-lg text-white focus:outline-none ${p?`border-bambu-dark-tertiary focus:border-bambu-green`:`border-red-500`}`,value:l,onChange:e=>S(e.target.value),placeholder:Wf(n)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>{_.current?.showPicker()},className:`absolute right-2 top-1/2 -translate-y-1/2 text-bambu-gray hover:text-white`,title:c(`printModal.openCalendar`),children:(0,G.jsx)(as,{className:`w-4 h-4`})}),(0,G.jsx)(`input`,{ref:_,type:`datetime-local`,className:`absolute top-0 left-0 w-0 h-0 opacity-0 pointer-events-none`,value:e.scheduledTime,onChange:i=>{let a=i.target.value;if(a){let i=new Date(a);isNaN(i.getTime())||(u(Kf(i,n)),f(qf(i,r)),m(!0),g(!0),t({...e,scheduledTime:a}))}},tabIndex:-1})]}),(0,G.jsx)(`div`,{className:`w-32`,children:(0,G.jsx)(`input`,{type:`text`,className:`w-full px-3 py-2 bg-bambu-dark border rounded-lg text-white focus:outline-none ${h?`border-bambu-dark-tertiary focus:border-bambu-green`:`border-red-500`}`,value:d,onChange:e=>C(e.target.value),placeholder:Gf(r)})})]}),(!p||!h)&&(0,G.jsx)(`p`,{className:`mt-1 text-xs text-red-700 dark:text-red-400`,children:c(`printModal.invalidDateTime`)})]}),e.scheduleType===`queue`&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`checkbox`,id:`requireManualStart`,checked:e.requireManualStart,onChange:n=>t({...e,requireManualStart:n.target.checked}),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsxs)(`label`,{htmlFor:`requireManualStart`,className:`text-sm flex items-center gap-1 text-bambu-gray`,children:[(0,G.jsx)(Mc,{className:`w-3.5 h-3.5`}),c(`printModal.requireManualStart`)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`checkbox`,id:`requirePrevious`,checked:e.requirePreviousSuccess,onChange:n=>t({...e,requirePreviousSuccess:n.target.checked}),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsx)(`label`,{htmlFor:`requirePrevious`,className:`text-sm text-bambu-gray`,children:c(`printModal.requirePreviousSuccess`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`checkbox`,id:`autoOffAfter`,checked:e.autoOffAfter,onChange:n=>t({...e,autoOffAfter:n.target.checked}),disabled:!i,className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green disabled:opacity-50`}),(0,G.jsxs)(`label`,{htmlFor:`autoOffAfter`,className:`text-sm flex items-center gap-1 ${i?`text-bambu-gray`:`text-bambu-gray/50`}`,children:[(0,G.jsx)(Il,{className:`w-3.5 h-3.5`}),c(`printModal.autoOffAfter`)]})]}),s&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`checkbox`,id:`gcodeInjection`,checked:e.gcodeInjection,onChange:n=>t({...e,gcodeInjection:n.target.checked}),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsxs)(`label`,{htmlFor:`gcodeInjection`,className:`text-sm flex items-center gap-1 text-bambu-gray`,children:[(0,G.jsx)(Fs,{className:`w-3.5 h-3.5`}),c(`printModal.gcodeInjection`,`Inject auto-print G-code`)]})]}),a&&e.scheduleType!==`queue`&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`checkbox`,id:`staggerEnabled`,checked:e.staggerEnabled,onChange:n=>t({...e,staggerEnabled:n.target.checked}),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsxs)(`label`,{htmlFor:`staggerEnabled`,className:`text-sm flex items-center gap-1 text-bambu-gray`,children:[(0,G.jsx)(qc,{className:`w-3.5 h-3.5`}),c(`printModal.staggerPrinterStarts`,`Stagger printer starts`)]})]}),e.staggerEnabled&&(0,G.jsxs)(`div`,{className:`ml-6 space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:c(`printModal.staggerGroupSize`,`Group size`)}),(0,G.jsx)(`input`,{type:`number`,min:1,max:o,value:e.staggerGroupSize,onChange:n=>t({...e,staggerGroupSize:Math.max(1,parseInt(n.target.value)||1)}),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`})]}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:c(`printModal.staggerInterval`,`Interval (min)`)}),(0,G.jsx)(`input`,{type:`number`,min:1,max:60,value:e.staggerIntervalMinutes,onChange:n=>t({...e,staggerIntervalMinutes:Math.max(1,parseInt(n.target.value)||1)}),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`})]})]}),o>0&&(()=>{let t=Math.ceil(o/e.staggerGroupSize),n=o%e.staggerGroupSize,r=(t-1)*e.staggerIntervalMinutes;return(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[c(`printModal.staggerPreview`,`{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min`,{printers:o,groups:t,size:e.staggerGroupSize,interval:e.staggerIntervalMinutes}),n!==0&&e.staggerGroupSize<o?` (${c(`printModal.staggerLastGroup`,`last group: {{count}}`,{count:n})})`:``,t>1?` (${c(`printModal.staggerTotal`,`total: {{minutes}} min`,{minutes:r})})`:``]})})()]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:e.scheduleType===`asap`?c(`printModal.helpAsap`):e.scheduleType===`scheduled`?c(`printModal.helpSchedule`):c(`printModal.helpQueue`)})]})}function zW({candidates:e,onReorder:t,plateByFile:n,onPlateChange:r,readOnly:i=!1,readOnlyNote:a}){let{t:o}=U(),s=Co({queries:i?[]:e.map(e=>({queryKey:[`library-file-plates`,e.id],queryFn:()=>Z.getLibraryFilePlates(e.id),staleTime:6e4}))}),c=(0,y.useMemo)(()=>{let t={};return e.forEach((e,n)=>{let r=s[n]?.data;r?.is_multi_plate&&r.plates.length>1&&(t[e.id]=r.plates.map(e=>({index:e.index,name:e.name})))}),t},[e,s]),l=(n,r)=>{if(r<0||r>=e.length)return;let i=[...e],[a]=i.splice(n,1);i.splice(r,0,a),t(i)};return(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-2`,children:[(0,G.jsx)(Ll,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:o(`printModal.variants.title`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:i?a??o(`printModal.variants.help`):o(`printModal.variants.help`)}),(0,G.jsx)(`div`,{className:`space-y-2`,children:e.map((t,a)=>{let s=c[t.id],u=t.sliced_for_model;return(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 rounded border border-bambu-dark-tertiary p-2`,children:[(0,G.jsxs)(`span`,{className:`text-xs font-mono text-bambu-gray w-5 shrink-0`,children:[a+1,`.`]}),(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded-full bg-bambu-green/10 text-bambu-green text-xs shrink-0`,children:u||o(`printModal.variants.unknownModel`)}),(0,G.jsx)(`span`,{className:`text-sm text-white truncate min-w-0 flex-1`,title:t.filename,children:t.filename}),s&&(0,G.jsxs)(`label`,{className:`flex items-center gap-1 text-xs text-bambu-gray shrink-0`,children:[(0,G.jsx)(qc,{className:`w-3 h-3`}),(0,G.jsx)(`select`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-1 py-0.5 text-xs text-white`,value:n[t.id]??s[0].index,onChange:e=>r(t.id,Number(e.target.value)),"aria-label":o(`printModal.variants.plateFor`,{filename:t.filename}),children:s.map(e=>(0,G.jsx)(`option`,{value:e.index,children:e.name||o(`printModal.plateN`,{n:e.index})},e.index))})]}),!i&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1 shrink-0`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>l(a,a-1),disabled:a===0,className:`p-1 rounded text-bambu-gray hover:text-white disabled:opacity-30`,"aria-label":o(`printModal.variants.moveUp`),children:(0,G.jsx)(Ho,{className:`w-3.5 h-3.5`})}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>l(a,a+1),disabled:a===e.length-1,className:`p-1 rounded text-bambu-gray hover:text-white disabled:opacity-30`,"aria-label":o(`printModal.variants.moveDown`),children:(0,G.jsx)(Io,{className:`w-3.5 h-3.5`})})]})]},t.id)})})]})}function BOe({costCenters:e,selectedCostCenterId:t,onChange:n}){let{t:r}=U();if(e.length===0)return null;let i=e.find(e=>e.id===t);return(0,G.jsxs)(`div`,{className:`space-y-1`,children:[(0,G.jsx)(`label`,{htmlFor:`printCostCenter`,className:`text-sm text-bambu-gray`,children:r(`printModal.costCenter`,`Cost center`)}),(0,G.jsx)(`select`,{id:`printCostCenter`,value:t??``,onChange:e=>n(e.target.value?Number(e.target.value):null),className:`w-full px-3 py-2 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded text-white focus:outline-none focus:ring-1 focus:ring-bambu-green`,children:e.map(e=>(0,G.jsxs)(`option`,{value:e.id,children:[e.name,e.is_private?` (${r(`printModal.personalDefault`,`Personal`)})`:``]},e.id))}),i?.budget_mode===`none`&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:r(`printModal.unlimitedNoBudget`,`Unlimited – no budget limit is set.`)})]})}var BW={bed_levelling:`auto`,flow_cali:`auto`,vibration_cali:!0,layer_inspect:!1,timelapse:!1,nozzle_offset_cali:`auto`,preheat_override:`inherit`,preheat_chamber_target_override:null},VW={scheduleType:`asap`,scheduledTime:``,requireManualStart:!1,requirePreviousSuccess:!1,autoOffAfter:!1,gcodeInjection:!1,staggerEnabled:!1,staggerGroupSize:2,staggerIntervalMinutes:5};function HW(e,t){let n=e=>(e||``).replace(`#`,``).toLowerCase().slice(0,6);return(e.type||``).toUpperCase()===(t.type||``).toUpperCase()&&n(e.color)===n(t.color)}function UW(e,t){let n=e=>{let n=t[e.slot_id];return!!n&&!HW(n,e)};return!e?.filaments||!e.filaments.some(n)?e:{...e,filaments:e.filaments.map(e=>n(e)?{...e,type:t[e.slot_id].type,color:t[e.slot_id].color,tray_info_idx:``}:e)}}function WW({mode:e,archiveId:t,libraryFileId:n,archiveName:r,queueItem:i,initialSelectedPrinterIds:a,onClose:o,onSuccess:s,projectId:c,cleanupLibraryAfterDispatch:l,variantFiles:u}){let{t:d}=U(),f=co(),{showToast:p}=Gd(),{hasPermission:m,user:h}=jd(),g=!!n&&!t,_=e===`edit-queue-item`,v=e===`create`&&(u?.length??0)>1,b=e===`edit-queue-item`&&(i?.variants?.length??0)>1?i.variants.map(e=>({id:e.library_file_id,filename:e.filename,sliced_for_model:e.target_model})):[],x=b.length>0,[S,C]=(0,y.useState)(u??[]),[w,T]=(0,y.useState)({}),[E,D]=(0,y.useState)(()=>e===`edit-queue-item`&&i?.printer_id?[i.printer_id]:a?.length?a:[]),[O,k]=(0,y.useState)(()=>e===`edit-queue-item`&&i?.plate_id!=null?new Set([i.plate_id]):new Set),A=O.size===1?[...O][0]:null,[j,M]=(0,y.useState)(1),[N,P]=(0,y.useState)({}),[F,I]=(0,y.useState)(()=>e===`edit-queue-item`&&i?{bed_levelling:i.bed_levelling??BW.bed_levelling,flow_cali:i.flow_cali??BW.flow_cali,vibration_cali:i.vibration_cali??BW.vibration_cali,layer_inspect:i.layer_inspect??BW.layer_inspect,timelapse:i.timelapse??BW.timelapse,nozzle_offset_cali:i.nozzle_offset_cali??BW.nozzle_offset_cali,preheat_override:i.preheat_override??BW.preheat_override,preheat_chamber_target_override:i.preheat_chamber_target_override??BW.preheat_chamber_target_override}:BW),[L,R]=(0,y.useState)(()=>{if(e===`edit-queue-item`&&i){let e=`queue`;i.scheduled_time&&!Fp(i.scheduled_time)&&(e=`scheduled`);let t=``;return i.scheduled_time&&!Fp(i.scheduled_time)&&(t=Qf(ep(i.scheduled_time)??new Date)),{scheduleType:e,scheduledTime:t,requireManualStart:i.manual_start,requirePreviousSuccess:i.require_previous_success,autoOffAfter:i.auto_off_after,gcodeInjection:i.gcode_injection??!1,staggerEnabled:!1,staggerGroupSize:VW.staggerGroupSize,staggerIntervalMinutes:VW.staggerIntervalMinutes}}return VW}),[z,B]=(0,y.useState)(()=>{if(e===`edit-queue-item`&&i?.ams_mapping&&Array.isArray(i.ams_mapping)){let e={};return i.ams_mapping.forEach((t,n)=>{t!==-1&&(e[n+1]=t)}),e}return{}}),[V,ee]=(0,y.useState)({}),[te,ne]=(0,y.useState)(()=>v||e===`edit-queue-item`&&i?.target_model?`model`:`printer`),[re,ie]=(0,y.useState)(()=>e===`edit-queue-item`&&i?.target_model?i.target_model:null),[ae,oe]=(0,y.useState)(()=>e===`edit-queue-item`&&i?.target_location?i.target_location:null),[se,H]=(0,y.useState)(()=>e===`edit-queue-item`?i?.cost_center_id??null:null),[ce,le]=(0,y.useState)(i?.estimated_cost??null),[ue,de]=(0,y.useState)({}),[fe,pe]=(0,y.useState)(()=>{if(e===`edit-queue-item`&&i?.filament_overrides){let e={};for(let t of i.filament_overrides)e[t.slot_id]={type:t.type,color:t.color};return e}return{}}),[me,he]=(0,y.useState)(()=>{if(e===`edit-queue-item`&&i?.filament_overrides){let e={};for(let t of i.filament_overrides)e[t.slot_id]=t.force_color_match===!0;return e}return{}}),[ge]=(0,y.useState)(()=>e===`edit-queue-item`&&i?.printer_id?[i.printer_id]:[]),[_e]=(0,y.useState)(()=>e===`edit-queue-item`&&i?i.plate_id:null),[ve,ye]=(0,y.useState)(!1),[be,xe]=(0,y.useState)({current:0,total:0}),[Se,Ce]=(0,y.useState)(null),[we,Te]=(0,y.useState)(new Set),Ee=E.length,De=E.length>0?E[0]:null,{data:Oe}=K({queryKey:[`settings`],queryFn:Z.getSettings}),ke=(0,y.useRef)(!1);(0,y.useEffect)(()=>{!Oe||ke.current||e===`edit-queue-item`||(ke.current=!0,I({bed_levelling:Oe.default_bed_levelling??BW.bed_levelling,flow_cali:Oe.default_flow_cali??BW.flow_cali,vibration_cali:Oe.default_vibration_cali??BW.vibration_cali,layer_inspect:Oe.default_layer_inspect??BW.layer_inspect,timelapse:Oe.default_timelapse??BW.timelapse,nozzle_offset_cali:Oe.default_nozzle_offset_cali??BW.nozzle_offset_cali,preheat_override:BW.preheat_override,preheat_chamber_target_override:BW.preheat_chamber_target_override}))},[Oe,e]);let Ae=(0,y.useRef)(!1);(0,y.useEffect)(()=>{!Oe||Ae.current||e===`edit-queue-item`||(Ae.current=!0,R(e=>({...e,staggerGroupSize:Oe.stagger_group_size??e.staggerGroupSize,staggerIntervalMinutes:Oe.stagger_interval_minutes??e.staggerIntervalMinutes})))},[Oe,e]);let je=Pf(Oe?.currency||`USD`),Me=Oe?.default_filament_cost??0,Ne=Oe?.billing_enabled===!0,{data:Pe,isLoading:Fe}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:Ie,isLoading:Le}=K({queryKey:[`finance`,`cost-centers`,`mine`],queryFn:Z.getMyCostCenters,enabled:!!h&&Ne}),Re=(0,y.useMemo)(()=>(Ie||[]).filter(e=>e.can_print&&e.is_active),[Ie]),ze=(0,y.useMemo)(()=>Re.find(e=>e.id===se)??null,[Re,se]);(0,y.useEffect)(()=>{Re.length!==0&&(se!=null&&Re.some(e=>e.id===se)||H(Re.find(e=>e.is_private)?.id??Re[0].id))},[Re,se]);let Be=Co({queries:E.map(e=>({queryKey:[`printer-inventory-remain`,e],queryFn:()=>Z.getInventoryRemain(e),staleTime:30*1e3,refetchOnMount:`always`,enabled:E.length>0}))}),Ve=(0,y.useMemo)(()=>{let e=new Map;return E.forEach((t,n)=>{let r=Be[n]?.data?.inventory_remain_g;if(!r)return;let i=new Map;Object.entries(r).forEach(([e,t])=>{let n=Number(e);Number.isNaN(n)||i.set(n,t)}),e.set(t,i)}),e},[E,Be]),He=(0,y.useMemo)(()=>{let e=new Map;return E.forEach((t,n)=>{let r=Be[n]?.data?.slot_materials;if(!r)return;let i=new Map;r.forEach(e=>i.set(e.global_tray_id,e)),e.set(t,i)}),e},[E,Be]),{data:Ue}=K({queryKey:[`archive`,t],queryFn:()=>Z.getArchive(t),enabled:!!t&&!g}),{data:We}=K({queryKey:[`library-file`,n],queryFn:()=>Z.getLibraryFile(n),enabled:g&&!!n}),Ge=Ue?.sliced_for_model||We?.sliced_for_model||null,Ke=(0,y.useMemo)(()=>g?void 0:OOe(Ue?.extra_data,De),[g,Ue?.extra_data,De]),{data:qe,isError:Je}=K({queryKey:[`archive-plates`,t],queryFn:()=>Z.getArchivePlates(t),enabled:!!t&&!g,retry:!1}),{data:Ye}=K({queryKey:[`library-file-plates`,n],queryFn:()=>Z.getLibraryFilePlates(n),enabled:g&&!!n}),Xe=g?Ye:qe,{data:Ze,isError:Qe}=K({queryKey:[`archive-filaments`,t,A],queryFn:()=>Z.getArchiveFilamentRequirements(t,A??void 0),enabled:!!t&&!g&&(A!==null||!Xe?.is_multi_plate),retry:!1}),{data:$e}=K({queryKey:[`library-file-filaments`,n,A],queryFn:()=>Z.getLibraryFileFilamentRequirements(n,A??void 0),enabled:g&&!!n&&(A!==null||!Xe?.is_multi_plate)}),et=!g&&(Je||Qe),tt=g?$e:Ze,nt=(0,y.useMemo)(()=>UW(tt,fe),[tt,fe]),{data:rt}=K({queryKey:[`available-filaments`,re,ae],queryFn:()=>Z.getAvailableFilaments(re,ae??void 0),enabled:te===`model`&&!!re}),it=(0,y.useMemo)(()=>Array.from(new Set(S.map(e=>e.sliced_for_model).filter(e=>!!e))),[S]),at=Co({queries:v?it.map(e=>({queryKey:[`available-filaments`,e,ae],queryFn:()=>Z.getAvailableFilaments(e,ae??void 0)})):[]}),ot=(0,y.useMemo)(()=>{let e=new Set,t=[];for(let n of at)for(let r of n.data??[]){let n=`${r.type}|${r.color}|${r.tray_info_idx}`;e.has(n)||(e.add(n),t.push(r))}return t},[at]),st=v?ot:rt,{data:ct,isLoading:lt}=K({queryKey:[`printer-status`,De],queryFn:()=>Z.getPrinterStatus(De),enabled:!!De}),ut=zp(Oe?.prefer_lowest_filament,ct?.ams_filament_backup),dt=async()=>{if(L.scheduleType!==`asap`||te!==`printer`||E.length===0)return!1;try{return(await Promise.all(E.map(e=>f.fetchQuery({queryKey:[`printer-status`,e],queryFn:()=>Z.getPrinterStatus(e),staleTime:0})))).some(e=>!vm(e))}catch{return!0}},{amsMapping:ft}=EW(nt,ct,z,ut,De?Ve.get(De):void 0),pt=(0,y.useMemo)(()=>[...O].sort((e,t)=>e-t),[O]),mt=O.size>1,ht=Co({queries:(mt?pt:[]).map(e=>({queryKey:g?[`library-file-filaments`,n,e]:[`archive-filaments`,t,e],queryFn:()=>g?Z.getLibraryFileFilamentRequirements(n,e):Z.getArchiveFilamentRequirements(t,e),enabled:g?!!n:!!t,retry:!1}))}),gt=ht.some(e=>e.isPending),_t=ht.some(e=>e.isError),vt=(0,y.useMemo)(()=>{let e=new Map;return pt.forEach((t,n)=>{let r=ht[n]?.data;r&&e.set(t,r)}),e},[pt,ht.map(e=>e.dataUpdatedAt).join(`|`)]),yt=(0,y.useMemo)(()=>{let e=new Map;for(let[t,n]of vt)e.set(t,UW(n,fe)??n);return e},[vt,fe]),[bt,xt]=(0,y.useState)({}),[St,Ct]=(0,y.useState)(()=>{if(e===`edit-queue-item`&&i?.nozzle_rack_choice){let e={};for(let[t,n]of Object.entries(i.nozzle_rack_choice)){let r=Number(t);Number.isInteger(r)&&Number.isInteger(n)&&(e[r]=n)}return e}return{}}),[wt,Tt]=(0,y.useState)({}),Et=(0,y.useMemo)(()=>{let e=new Map;if(!mt||!De||E.length!==1)return e;let t=xW(ct),n=ct?.fila_switch?.installed===!0,r=Ve.get(De);for(let i of pt){let a=yt.get(i);if(!a)continue;let o=wW(a,t,bt[i]??{},ut,r,n);e.set(i,TW(o))}return e},[mt,De,ct,Ve,pt,yt,bt,ut,E.length]),Dt=EOe(E,Pe,nt,z,V,ee,Oe?.prefer_lowest_filament,Ve);(0,y.useEffect)(()=>{Xe?.plates&&Xe.plates.length>=1&&O.size===0&&k(new Set([Xe.plates[0].index]))},[Xe,O.size]),(0,y.useEffect)(()=>{if(!v||!n)return;let e=w[n];e!=null&&k(t=>t.size===1&&t.has(e)?t:new Set([e]))},[v,n,w]),(0,y.useEffect)(()=>{if(e===`edit-queue-item`)return;let t=Pe?.filter(e=>e.is_active)||[];t.length===1&&E.length===0&&D([t[0].id])},[e,Pe,E.length]),(0,y.useEffect)(()=>{e===`edit-queue-item`?(JSON.stringify(E.sort())!==JSON.stringify(ge.sort())||A!==_e)&&(B({}),xt({}),ee({}),Te(new Set)):(B({}),xt({}),ee({}),Te(new Set))},[e,E,A,ge,_e]);let[Ot,kt]=(0,y.useState)(re),[At,jt]=(0,y.useState)(A);(0,y.useEffect)(()=>{let t=re!==null&&re!==Ot,n=A!==At;!t&&!n||(t&&kt(re),n&&jt(A),!(t&&!n&&Ot===null)&&(e!==`edit-queue-item`||Ot!==null)&&(pe({}),he({})))},[re,A,Ot,At,e]),(0,y.useEffect)(()=>{te!==`model`||re||!Ge||Pe?.some(e=>e.is_active&&e.model===Ge)&&ie(Ge)},[te,re,Ge,Pe]),(0,y.useEffect)(()=>{if(!Oe?.per_printer_mapping_expanded||E.length<=1)return;let e=E.filter(e=>{if(we.has(e))return!1;let t=Dt.printerResults.find(t=>t.printerId===e);return t&&t.status&&!t.isLoading});e.length>0&&(Te(t=>{let n=new Set(t);return e.forEach(e=>n.add(e)),n}),e.forEach(e=>{Dt.autoConfigurePrinter(e)}))},[Oe?.per_printer_mapping_expanded,E,we,Dt]),(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&!ve&&o()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[o,ve]);let Mt=Xe?.is_multi_plate??!1,Nt=Xe?.plates??[],Pt=(0,y.useMemo)(()=>{if(!Se||Se.length===0)return``;let e=Se.map(e=>e.pooled?d(`printModal.insufficientFilamentLinePooled`,{printer:e.printerName,slot:e.slotLabel,required:Math.round(e.requiredGrams),remaining:Math.round(e.remainingGrams)}):d(`printModal.insufficientFilamentLine`,{printer:e.printerName,slot:e.slotLabel,required:Math.round(e.requiredGrams),remaining:Math.round(e.remainingGrams)}));return[d(`printModal.insufficientFilamentMessage`),...e].join(`
-`)},[Se,d]),Ft=q({mutationFn:e=>Z.addToQueue(e)}),It=q({mutationFn:e=>Z.updateQueueItem(i.id,e),onSuccess:()=>{f.invalidateQueries({queryKey:[`queue`]}),p(`Queue item updated`),s?.(),o()},onError:e=>{p(e.message||`Failed to update queue item`,`error`)}}),Lt=(e,t)=>{if(mt)return t===null||E.length!==1?void 0:Et.get(t);if(E.length>1){let t=V[e];if(t&&!t.useDefault)return Dt.getFinalMapping(e)}return ft},Rt=async(a,u)=>{if(a?.preventDefault(),Ne&&ze==null){p(d(`printModal.noPrintableCostCenters`),`error`);return}if(!u?.skipFilamentCheck&&!Oe?.disable_filament_warnings&&!_&&te===`printer`){let e=[],t=mt?pt.map(e=>({plateId:e,reqs:vt.get(e)?.filaments??[]})):[{plateId:A,reqs:tt?.filaments??[]}];if(t.some(e=>e.reqs.length>0)&&He.size>0)for(let n of E){let r=E.length>1?Dt.printerResults.find(e=>e.printerId===n)?.status:ct,i=xW(r),a=new Map(i.map(e=>[e.globalTrayId,e.label])),o=He.get(n),s=Pe?.find(e=>e.id===n)?.name??`Printer ${n}`;if(!o||o.size===0)continue;let c=new Map;for(let e of t){let t=Lt(n,e.plateId);t&&e.reqs.forEach(e=>{if(!e.slot_id||e.slot_id<=0)return;let n=t[e.slot_id-1];!Number.isFinite(n)||n<0||c.set(n,(c.get(n)??0)+e.used_grams)})}let l=r?.ams_filament_backup===!0,u=e=>`${e.material_key}#${e.extruder}`,d=new Map,f=new Map,p=new Map;if(l){o.forEach(e=>{let t=u(e);d.set(t,(d.get(t)??0)+e.remaining_g),f.set(t,(f.get(t)??0)+1)});for(let[e,t]of c){let n=o.get(e);if(!n)continue;let r=u(n);p.set(r,(p.get(r)??0)+t)}}for(let[t,n]of c){let r=o.get(t);if(!r)continue;let i=a.get(t)??`Tray ${t}`;if(l){let t=u(r),n=d.get(t)??0,a=p.get(t)??0;if(n>=a)continue;e.push({printerName:s,slotLabel:i,requiredGrams:a,remainingGrams:n,pooled:(f.get(t)??1)>1});continue}r.remaining_g>=n||e.push({printerName:s,slotLabel:i,requiredGrams:n,remainingGrams:r.remaining_g})}}if(e.length>0){Ce(e);return}}if(te===`printer`&&E.length===0){p(`Please select at least one printer`,`error`);return}if(!v&&te===`model`&&!re){p(`Please select a target printer model`,`error`);return}if(!v&&te===`model`&&!gm(Ge,re)){p(`File was sliced for ${Ge} and cannot be dispatched to ${re} printers`,`error`);return}ye(!0);let m=O.size>1?Nt.filter(e=>O.has(e.index)):[null],h=te===`model`?m.length:E.length*m.length;xe({current:0,total:h});let y={success:0,failed:0,errors:[]},b=new Map((e===`edit-queue-item`?i?.filament_overrides??[]:[]).map(e=>[e.slot_id,e])),x=(e,t,n)=>{let r=b.get(e);return r?.tray_info_idx&&HW(r,{type:t,color:n})?{tray_info_idx:r.tray_info_idx}:{}},C=e=>{let t=[];if(e?.filaments)for(let n of e.filaments){let e=fe[n.slot_id],r=me[n.slot_id]??!1,i=e?.type??n.type,a=e?.color??n.color;(e||r)&&t.push({slot_id:n.slot_id,type:i,color:a,color_name:Tf(a),...x(n.slot_id,i,a),force_color_match:r})}else for(let[e,{type:n,color:r}]of Object.entries(fe)){let i=parseInt(e,10),a=me[i]??!1;t.push({slot_id:i,type:n,color:r,color_name:Tf(r),...x(i,n,r),force_color_match:a})}return t.length>0?t:void 0},T=C(tt),D=e=>mt&&e!==null?C(vt.get(e)):T,k=e=>{let t=D(e)?.filter(e=>fe[e.slot_id]);return t&&t.length>0?t:void 0};if(v){try{await Z.addToQueue({variants:S.map(e=>({library_file_id:e.id,plate_id:w[e.id]??null,filament_overrides:T})),target_location:ae,require_previous_success:L.requirePreviousSuccess,auto_off_after:L.autoOffAfter,gcode_injection:L.gcodeInjection,manual_start:L.scheduleType===`queue`&&L.requireManualStart,scheduled_time:L.scheduleType===`scheduled`&&L.scheduledTime?new Date(L.scheduledTime).toISOString():void 0,quantity:j,...F,project_id:c??void 0}),p(d(`printModal.variants.queued`,{count:S.length}),`success`),f.invalidateQueries({queryKey:[`queue`]}),s?.(),o()}catch(e){p(e instanceof Error?e.message:String(e),`error`)}finally{ye(!1)}return}let M=m.map((e,t)=>{let n=e?e.index:A;return{plate_id:n,plate_name:e&&e.name||null,quantity_target:Ut(n),sort_order:t}}),N=M.reduce((e,t)=>e+t.quantity_target,0),P=e===`create`&&(m.length>1||N>1)&&(te===`model`||E.length===1),I=null;if(P)try{let e=(r||``).replace(/\.gcode\.3mf$/i,``).replace(/\.3mf$/i,``),i=m.length>1?`${e||`Batch`} · ${m.length} plates`:`${e||`Batch`} ×${N}`;I=(await Z.createBatch({name:i,archive_id:g?void 0:t,library_file_id:g?n:void 0,plates:M})).id}catch{I=null}let R=new Map,z=(e,t,n=1)=>{if(L.scheduleType!==`asap`)return;let r=t===null?`unassigned`:`printer:${t}`,i=(R.get(r)??0)+1;e.insert_at_top=!0,e.insert_position=i,R.set(r,i+n-1)},B=e=>{let t=e!=null&&mt?wt[e]:St;return t&&Object.keys(t).length>0?t:void 0},V=(e,r)=>{let i=r===void 0?A:r,a=i!=null&&mt?ue[i]??null:ce;return{printer_id:te===`printer`?e:null,target_model:te===`model`?re:null,target_location:te===`model`?ae:null,filament_overrides:te===`model`?D(i):k(i),archive_id:g?void 0:t,library_file_id:g?n:void 0,require_previous_success:L.requirePreviousSuccess,auto_off_after:L.autoOffAfter,gcode_injection:L.gcodeInjection,manual_start:L.scheduleType===`queue`&&L.requireManualStart,skip_filament_check:u?.skipFilamentCheck===!0?!0:void 0,ams_mapping:e?Lt(e,i):void 0,nozzle_rack_choice:e?B(i):void 0,plate_id:i,scheduled_time:L.scheduleType===`scheduled`&&L.scheduledTime?new Date(L.scheduledTime).toISOString():void 0,...F,project_id:c??void 0,cost_center_id:Ne?se:void 0,estimated_cost:Ne&&se!=null?a:void 0,batch_id:I??void 0,cleanup_library_after_dispatch:l}};if(te===`model`){let t=0;for(let n of m){t++,xe({current:t,total:h});let r=n?n.index:A;try{if(e===`edit-queue-item`&&!n){let e={printer_id:null,target_model:re,target_location:ae,filament_overrides:T||null,require_previous_success:L.requirePreviousSuccess,auto_off_after:L.autoOffAfter,gcode_injection:L.gcodeInjection,manual_start:L.scheduleType===`queue`&&L.requireManualStart,ams_mapping:void 0,plate_id:r,scheduled_time:L.scheduleType===`scheduled`&&L.scheduledTime?new Date(L.scheduledTime).toISOString():null,...F,cost_center_id:Ne?se:void 0,estimated_cost:Ne&&se!=null?ce:void 0};await It.mutateAsync(e)}else{let e=V(null,r),t=Ut(r);t>1&&(e.quantity=t),z(e,null,t),await Ft.mutateAsync(e)}y.success++}catch(e){y.failed++;let t=n?n.name||`Plate ${n.index}`:``;y.errors.push(t?`${t}: ${e.message}`:e.message)}}}else{let e=L.staggerEnabled&&!_&&E.length>1,t=e?L.scheduleType===`scheduled`&&L.scheduledTime?new Date(L.scheduledTime).getTime():Date.now():0,n=0;for(let r of m){let i=r?r.index:A;for(let a=0;a<E.length;a++){let o=E[a];n++,xe({current:n,total:h});try{if(_&&n===1){let e=Lt(o,i),t={printer_id:o,target_model:null,target_location:null,filament_overrides:k(i)??null,require_previous_success:L.requirePreviousSuccess,auto_off_after:L.autoOffAfter,gcode_injection:L.gcodeInjection,manual_start:L.scheduleType===`queue`&&L.requireManualStart,ams_mapping:e,nozzle_rack_choice:B(i)??null,plate_id:i,scheduled_time:L.scheduleType===`scheduled`&&L.scheduledTime?new Date(L.scheduledTime).toISOString():null,...F,cost_center_id:Ne?se:void 0,estimated_cost:Ne&&se!=null?i!=null&&mt?ue[i]??null:ce:void 0};await It.mutateAsync(t)}else{let n=V(o,i),r=Ut(i);if(r>1&&(n.quantity=r),z(n,o,r),e){let e=Math.floor(a/L.staggerGroupSize);if(e>0){let r=e*L.staggerIntervalMinutes*6e4;n.scheduled_time=new Date(t+r).toISOString()}}await Ft.mutateAsync(n)}y.success++}catch(e){y.failed++;let t=Pe?.find(e=>e.id===o)?.name||`Printer ${o}`,n=r?r.name||`Plate ${r.index}`:``,i=n?`${t} (${n})`:t;y.errors.push(`${i}: ${e.message}`)}}}}ye(!1),y.failed===0?(_?e===`edit-queue-item`&&p(`Queue item updated`):y.success===1?p(await dt()?d(`queue.printQueuedWillStartWhenIdle`):te===`model`?`Queued for any ${re}`:d(`queue.printQueued`)):p(await dt()?d(`queue.printQueuedWillStartWhenIdle`):d(`queue.itemsQueued`,{count:y.success})),f.invalidateQueries({queryKey:[`queue`]}),s?.(),o()):y.success===0?p(`Failed: ${y.errors[0]}`,`error`):(p(`${y.success} succeeded, ${y.failed} failed`,`error`),f.invalidateQueries({queryKey:[`queue`]}))},zt=ve||It.isPending,Bt=(0,y.useMemo)(()=>!(zt||Ne&&(Le||ze==null)||te===`printer`&&E.length===0||!v&&te===`model`&&!re||!v&&te===`model`&&!gm(Ge,re)||Mt&&O.size===0||gt||_t||te===`printer`&&E.length===1&&lt),[E.length,te,re,Ge,Mt,O.size,zt,gt,_t,lt,v,Ne,Le,ze]),Vt=te===`printer`&&E.length>1?1:j,Ht=e===`create`&&!v&&Mt&&Nt.length>1,Ut=e=>!Ht||e==null?Vt:te===`printer`&&E.length>1?1:Math.max(1,N[e]??1);(0,y.useEffect)(()=>{e===`create`&&L.gcodeInjection&&!Oe?.gcode_snippets&&R(e=>({...e,gcodeInjection:!1}))},[e,Oe?.gcode_snippets,L.gcodeInjection]);let Wt=_?{title:d(`queue.editQueueItem`),icon:kl,submitText:d(`common.save`),submitIcon:kl,loadingText:be.total>1?d(`queue.savingProgress`,{current:be.current,total:be.total}):d(`common.saving`)}:{title:d(`common.print`),icon:Ll,submitText:d(`common.print`),submitIcon:Ll,loadingText:be.total>1?d(`queue.addingProgress`,{current:be.current,total:be.total}):d(`queue.adding`)},Gt=Wt.icon,Kt=Wt.submitIcon,qt=De&&O.size<=1&&(g||(Mt?A!==null:!0));(0,y.useEffect)(()=>{(!qt||et||E.length!==1)&&le(null)},[et,E.length,qt]);let Jt=!!De&&mt&&E.length===1,Yt=te===`model`&&(v||!!re)&&!!st&&st.length>0,Xt=(0,y.useMemo)(()=>new Set([`H2D`,`H2DPRO`,`H2C`,`X2D`]),[]),Zt=(0,y.useMemo)(()=>te===`model`?re?Xt.has(re.toUpperCase().replace(/[\s-]/g,``)):!1:!Pe||E.length===0?!1:E.some(e=>Pe.find(t=>t.id===e)?.nozzle_count===2),[te,re,Pe,E,Xt]);return(0,G.jsxs)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:ve?void 0:o,children:[(0,G.jsx)(Ld,{className:`w-full max-w-4xl max-h-[90vh] overflow-y-auto`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(zd,{className:`p-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Gt,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:Wt.title})]}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:o,disabled:ve,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`form`,{onSubmit:Rt,className:`p-4 space-y-4`,children:[(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[(0,G.jsx)(`span`,{className:`block text-bambu-gray mb-1`,children:`Print Job`}),(0,G.jsx)(`span`,{className:`text-white font-medium truncate block`,children:r})]}),(()=>{if(!Nt.length)return null;let e=kW((A==null?Nt[0]:Nt.find(e=>e.index===A))?.bed_type);return e?(0,G.jsxs)(`p`,{className:`flex items-center gap-1.5 text-xs text-bambu-gray -mt-2`,title:e.label,children:[(0,G.jsx)(`img`,{src:e.icon,alt:``,className:`w-4 h-4 object-contain flex-shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,children:e.label})]}):null})(),!v&&(0,G.jsx)(NOe,{plates:Nt,isMultiPlate:Mt,selectedPlates:O,onToggle:e=>{k(t=>{let n=new Set(t);return _?(n.clear(),n.add(e)):n.has(e)?n.delete(e):n.add(e),n})},onSelectAll:_?void 0:()=>k(new Set(Nt.map(e=>e.index))),onDeselectAll:_?void 0:()=>k(new Set),multiSelect:!_,quantities:Ht?N:void 0,onQuantityChange:Ht?(e,t)=>P(n=>({...n,[e]:t})):void 0}),v&&(0,G.jsx)(zW,{candidates:S,onReorder:C,plateByFile:w,onPlateChange:(e,t)=>T(n=>({...n,[e]:t}))}),x&&(0,G.jsx)(zW,{candidates:b,readOnly:!0,readOnlyNote:d(`printModal.variants.editNote`),onReorder:()=>{},plateByFile:{},onPlateChange:()=>{}}),!v&&!x&&!a?.length&&(0,G.jsx)(IOe,{printers:Pe||[],selectedPrinterIds:E,onMultiSelect:D,isLoading:Fe,allowMultiple:!0,showInactive:e===`edit-queue-item`,disableBusy:!1,printerMappingResults:Dt.printerResults,filamentReqs:mt?void 0:nt,onAutoConfigurePrinter:Dt.autoConfigurePrinter,onUpdatePrinterConfig:Dt.updatePrinterConfig,assignmentMode:te,onAssignmentModeChange:ne,targetModel:re,onTargetModelChange:ie,targetLocation:ae,onTargetLocationChange:oe,slicedForModel:Ge}),Yt&&!mt&&tt&&(0,G.jsx)(IW,{filamentReqs:tt,availableFilaments:st,overrides:fe,onChange:pe,forceColorMatch:me,onForceColorMatchChange:(e,t)=>he(n=>({...n,[e]:t}))}),Yt&&mt&&pt.map((e,t)=>{let n=Nt.find(t=>t.index===e),r=vt.get(e);return r?(0,G.jsx)(IW,{plateLabel:n?.name||d(`printModal.plateN`,`Plate {{n}}`,{n:e}),showHint:t===0,filamentReqs:r,availableFilaments:rt,overrides:fe,onChange:pe,forceColorMatch:me,onForceColorMatchChange:(e,t)=>he(n=>({...n,[e]:t}))},e):null}),Ge&&te===`printer`&&E.length===1&&(()=>{let e=Pe?.find(e=>e.id===E[0]);return e&&e.model&&Ge!==e.model?(0,G.jsxs)(`div`,{className:`p-3 mb-2 bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30 rounded-lg flex items-center gap-2`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-600 dark:text-yellow-400 flex-shrink-0`}),(0,G.jsxs)(`span`,{className:`text-sm text-yellow-700 dark:text-yellow-400`,children:[`File was sliced for `,Ge,`, but printing on `,e.model]})]}):null})(),et&&(0,G.jsxs)(`div`,{className:`flex items-start gap-2 p-3 mb-2 bg-orange-50 dark:bg-orange-500/10 border border-orange-300 dark:border-orange-500/30 rounded-lg text-sm`,children:[(0,G.jsx)(ys,{className:`w-4 h-4 text-orange-600 dark:text-orange-400 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`p`,{className:`text-orange-700 dark:text-orange-400`,children:`Archive data unavailable. The source file may have been deleted. Filament mapping is disabled.`})]}),_t&&(0,G.jsxs)(`div`,{className:`flex items-start gap-2 p-3 mb-2 bg-orange-50 dark:bg-orange-500/10 border border-orange-300 dark:border-orange-500/30 rounded-lg text-sm`,children:[(0,G.jsx)(ys,{className:`w-4 h-4 text-orange-600 dark:text-orange-400 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`p`,{className:`text-orange-700 dark:text-orange-400`,children:d(`printModal.plateFilamentsUnreadable`,`The filaments of a selected plate could not be read, so it can't be mapped. Deselect it to queue the others.`)})]}),qt&&!et&&E.length===1&&(0,G.jsx)(FW,{printerId:De,filamentReqs:nt,manualMappings:z,onManualMappingChange:B,onEstimatedCostChange:le,budgetAvailable:Ne?ze?.budget_available??null:null,quantity:Vt,defaultExpanded:!!a?.length||(Oe?.per_printer_mapping_expanded??!1),currencySymbol:je,defaultCostPerKg:Me,forceColorMatch:me,onForceColorMatchChange:(e,t)=>he(n=>({...n,[e]:t})),archiveAmsMapping:Ke,nozzleRackChoice:St,onNozzleRackChoiceChange:Ct}),Jt&&!et&&pt.map(e=>{let t=Nt.find(t=>t.index===e),n=yt.get(e);return n?(0,G.jsx)(FW,{printerId:De,plateLabel:t?.name||d(`printModal.plateN`,`Plate {{n}}`,{n:e}),filamentReqs:n,manualMappings:bt[e]??{},onManualMappingChange:t=>xt(n=>({...n,[e]:t})),onEstimatedCostChange:t=>de(n=>({...n,[e]:t})),budgetAvailable:Ne?ze?.budget_available??null:null,quantity:Ut(e),defaultExpanded:!1,currencySymbol:je,defaultCostPerKg:Me,forceColorMatch:me,onForceColorMatchChange:(e,t)=>he(n=>({...n,[e]:t})),archiveAmsMapping:Ke,nozzleRackChoice:wt[e]??{},onNozzleRackChoiceChange:t=>Tt(n=>({...n,[e]:t}))},e):null}),(e===`create`||Ee>0||te===`model`&&re)&&(0,G.jsx)(ROe,{options:F,onChange:I,defaultExpanded:!!a?.length,showDualNozzleOptions:Zt}),Ne&&Re.length>0&&(0,G.jsx)(BOe,{costCenters:Re,selectedCostCenterId:se,onChange:H}),Ne&&!Le&&Re.length===0&&(0,G.jsxs)(`div`,{role:`alert`,className:`p-3 bg-yellow-100 dark:bg-yellow-500/20 border border-yellow-500/50 rounded-lg text-sm text-yellow-800 dark:text-yellow-300 flex items-start gap-2`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 mt-0.5 shrink-0`}),d(`printModal.noPrintableCostCenters`)]}),e!==`edit-queue-item`&&!Ht&&(te===`model`||E.length<=1)&&(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`label`,{htmlFor:`printQuantity`,className:`text-sm text-bambu-gray whitespace-nowrap`,children:d(`queue.quantity`,`Quantity`)}),(0,G.jsx)(`input`,{id:`printQuantity`,type:`number`,min:1,max:999,value:j,onChange:e=>M(Math.max(1,Math.min(999,parseInt(e.target.value)||1))),className:`w-20 px-2 py-1 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded text-white focus:outline-none focus:ring-1 focus:ring-bambu-green`}),j>1&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:d(`queue.quantityHint`,`Creates {{count}} queue items`,{count:j})})]}),(0,G.jsx)(zOe,{options:L,onChange:R,dateFormat:Oe?.date_format||`system`,timeFormat:Oe?.time_format||`system`,canControlPrinter:m(`printers:control`),showStagger:!_&&te===`printer`&&E.length>1,printerCount:E.length,hasGcodeSnippets:!!Oe?.gcode_snippets}),It.isError&&(0,G.jsx)(`div`,{className:`mb-4 p-3 bg-red-100 dark:bg-red-500/20 border border-red-500/50 rounded-lg text-sm text-red-700 dark:text-red-400`,children:It.error?.message||`Failed to complete operation`}),te===`printer`&&E.length===1&&lt&&(0,G.jsxs)(`div`,{className:`mb-4 p-3 bg-blue-100 dark:bg-blue-500/20 border border-blue-500/50 rounded-lg text-sm text-blue-700 dark:text-blue-400 flex items-center gap-2`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),d(`printModal.waitingForAmsStatus`,{printer:Pe?.find(e=>e.id===De)?.name??``})]}),(0,G.jsxs)(`div`,{className:`flex gap-3 pt-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:o,className:`flex-1`,disabled:ve,children:`Cancel`}),(0,G.jsx)(Q,{type:`submit`,disabled:!Bt,className:`flex-1`,children:zt?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),Wt.loadingText]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Kt,{className:`w-4 h-4`}),Wt.submitText]})})]})]})]})}),Se&&Se.length>0&&(0,G.jsx)(rf,{title:d(`printModal.insufficientFilamentTitle`),message:Pt,confirmText:d(`printModal.printAnyway`),cancelText:d(`common.cancel`),variant:`warning`,onConfirm:()=>{Ce(null),Rt(void 0,{skipFilamentCheck:!0})},onCancel:()=>Ce(null)})]})}function GW({value:e,titleKey:t=`printers.copyToClipboard`,copiedTitleKey:n=`printers.copied`,className:r=`ml-2 p-1 rounded hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white transition-colors`,iconClassName:i=`w-3.5 h-3.5`}){let{t:a}=U(),[o,s]=(0,y.useState)(!1);return(0,G.jsx)(`button`,{onClick:async()=>{try{if(navigator.clipboard&&window.isSecureContext)await navigator.clipboard.writeText(e);else{let t=document.createElement(`textarea`);t.value=e,t.style.position=`fixed`,t.style.opacity=`0`,document.body.appendChild(t);try{if(t.select(),!document.execCommand(`copy`))return}finally{document.body.removeChild(t)}}s(!0),setTimeout(()=>s(!1),2e3)}catch{}},className:r,title:a(o?n:t),children:o?(0,G.jsx)(fs,{className:`${i} text-bambu-green`}):(0,G.jsx)(Vs,{className:i})})}function VOe({printer:e,status:t,totalPrintHours:n,onClose:r}){let{t:i}=U();(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&r()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[r]);let a=[];if(a.push({label:i(`printers.model`),value:e.model??`—`}),a.push({label:i(`common.status`),value:(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1.5 px-2 py-0.5 rounded-full text-xs font-medium ${t?.connected?`bg-bambu-green/20 text-bambu-green`:`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`}`,children:[(0,G.jsx)(`span`,{className:`w-1.5 h-1.5 rounded-full ${t?.connected?`bg-bambu-green`:`bg-red-400`}`}),t?.connected?i(`printers.status.available`):i(`printers.status.offline`)]})}),t?.state&&a.push({label:i(`printers.state`),value:i({IDLE:`printers.status.idle`,RUNNING:`printers.status.printing`,PAUSE:`printers.status.paused`,FINISH:`printers.status.finished`,FAILED:`printers.status.error`}[t.state]??`printers.status.unknown`)}),a.push({label:i(`printers.ipAddress`),value:(0,G.jsxs)(`span`,{className:`flex items-center`,children:[(0,G.jsx)(`span`,{className:`font-mono`,children:e.ip_address}),(0,G.jsx)(GW,{value:e.ip_address})]})}),a.push({label:i(`printers.serialNumber`),value:(0,G.jsxs)(`span`,{className:`flex items-center`,children:[(0,G.jsx)(`span`,{className:`font-mono truncate`,children:e.serial_number}),(0,G.jsx)(GW,{value:e.serial_number})]})}),t?.wired_network)a.push({label:i(`printers.networkLabel`,`Network`),value:(0,G.jsxs)(`span`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(ts,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsx)(`span`,{className:`text-bambu-green`,children:i(`printers.connection.ethernet`,`Ethernet`)})]})});else if(t?.wifi_signal!=null){let e=_m(t.wifi_signal);a.push({label:i(`printers.wifiSignalLabel`),value:(0,G.jsxs)(`span`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(cu,{className:`w-4 h-4 ${e.color}`}),(0,G.jsx)(`span`,{className:e.color,children:i(e.labelKey)}),(0,G.jsxs)(`span`,{className:`text-bambu-gray text-xs`,children:[`(`,t.wifi_signal,` dBm)`]})]})})}return a.push({label:i(`printers.firmware`),value:t?.firmware_version??`—`}),t?.developer_mode!=null&&a.push({label:i(`printers.developerMode`),value:(0,G.jsx)(`span`,{className:`inline-flex items-center px-2 py-0.5 rounded-full text-xs font-medium ${t.developer_mode?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:t.developer_mode?i(`printers.enabled`):i(`printers.disabled`)})}),a.push({label:i(`printers.nozzleCount`),value:e.nozzle_count}),a.push({label:i(`printers.autoArchive`),value:(0,G.jsx)(`span`,{className:`inline-flex items-center px-2 py-0.5 rounded-full text-xs font-medium ${e.auto_archive?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:e.auto_archive?i(`printers.enabled`):i(`printers.disabled`)})}),n!=null&&n>0&&a.push({label:i(`printers.totalPrintHours`),value:`${Math.round(n)}h`}),e.location&&a.push({label:i(`printers.sort.location`),value:e.location}),a.push({label:i(`printers.addedOn`),value:np(e.created_at)}),(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,role:`dialog`,"aria-modal":`true`,onClick:r,children:(0,G.jsx)(Ld,{className:`w-full max-w-md`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(zd,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-4`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e.name}),(0,G.jsx)(`button`,{onClick:r,className:`p-1 hover:bg-bambu-dark rounded flex-shrink-0`,children:(0,G.jsx)(td,{className:`w-5 h-5 text-bambu-gray`})})]}),(0,G.jsx)(`div`,{className:`flex justify-center mb-4`,children:(0,G.jsx)(`img`,{src:hm(e.model),alt:e.model??e.name,className:`h-24 object-contain`})}),(0,G.jsx)(`div`,{className:`space-y-0`,children:a.map((e,t)=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-4 py-2.5 border-b border-bambu-dark-tertiary last:border-0`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray whitespace-nowrap`,children:e.label}),(0,G.jsx)(`span`,{className:`text-sm text-white text-right`,children:e.value})]},t))})]})})})}var KW=0,qW=1;function HOe({slotLabel:e,amsId:t,slotId:n,extruderSlots:r,isLoading:i=!1,onConfirm:a,onCancel:o}){let{t:s}=U(),[c,l]=(0,y.useState)(null);(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&!i&&o()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[o,i]);let u=e=>{let i=r[String(e)];return i?.ams_id===t&&i?.slot_id===n},d=[{extruderId:qW,label:s(`printers.ams.feedLeft`),taken:u(qW)},{extruderId:KW,label:s(`printers.ams.feedRight`),taken:u(KW)}],f=d.some(e=>e.extruderId===c&&e.taken);return(0,y.useEffect)(()=>{f&&l(null)},[f]),(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center p-4 z-50`,onClick:i?void 0:o,children:(0,G.jsx)(Ld,{className:`w-full max-w-md`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(zd,{className:`p-6`,children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white mb-2`,children:s(`printers.ams.feedTitle`,{slot:e})}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm`,children:s(`printers.ams.feedPrompt`)}),(0,G.jsx)(`div`,{className:`grid grid-cols-2 gap-3 mt-4`,children:d.map(({extruderId:e,label:t,taken:n})=>{let r=c===e;return(0,G.jsxs)(`button`,{type:`button`,onClick:()=>l(e),disabled:n||i,title:n?s(`printers.ams.feedAlreadyLoaded`):void 0,className:`p-3 rounded-lg border text-sm transition-colors ${n?`border-transparent bg-bambu-dark text-bambu-gray/50 cursor-not-allowed`:r?`border-bambu-green/50 bg-bambu-green/10 text-white`:`border-transparent bg-bambu-dark text-white hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(`div`,{className:`font-medium`,children:t}),n&&(0,G.jsx)(`div`,{className:`text-xs mt-1`,children:s(`printers.ams.feedAlreadyLoaded`)})]},e)})}),(0,G.jsxs)(`div`,{className:`flex gap-3 mt-6`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:o,className:`flex-1`,disabled:i,children:s(`common.cancel`)}),(0,G.jsx)(Q,{onClick:()=>c!==null&&a(c),className:`flex-1`,disabled:c===null||i,children:i?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 mr-2 animate-spin`}),s(`common.loading`)]}):s(`common.confirm`)})]})]})})})}function UOe(e){if(!e||e.length<6)return!1;let t=parseInt(e.slice(0,2),16),n=parseInt(e.slice(2,4),16),r=parseInt(e.slice(4,6),16);return(.299*t+.587*n+.114*r)/255>.6}function JW({trayColor:e,trayType:t,isEmpty:n,emptyKind:r,slotNumber:i}){let a=r===`reset`?`#3d3d3d`:`#666`;return(0,G.jsx)(`div`,{className:`w-3.5 h-3.5 rounded-full mx-auto mb-0.5 border-2 flex items-center justify-center`,style:{backgroundColor:e?`#${e}`:t?`#333`:`transparent`,borderColor:n?a:`rgba(255,255,255,0.1)`,borderStyle:n?`dashed`:`solid`},children:(0,G.jsx)(`span`,{className:`text-[6px] font-bold leading-none select-none`,style:{color:e&&UOe(e)?`#000`:`#fff`},children:i})})}var WOe=240,GOe=440,KOe=[30,60,120,240,480,720,1440],YW=[`scheduled-dryings`],qOe={ams_power_required:`printers.drying.powerRequired`,ams_retract_filament:`printers.drying.retractFilament`,ams_blocked:`printers.drying.cannotDryNow`,ams_not_found:`printers.drying.waitingAmsNotFound`,printer_offline:`printers.drying.waitingOffline`,printer_busy:`printers.drying.waitingPrinterBusy`,already_drying:`printers.drying.waitingAlreadyDrying`,interrupted:`printers.drying.waitingInterrupted`};function JOe(e){return e?qOe[e]:void 0}function YOe(e){let t=(e??[]).map(e=>Number(e));return t.some(e=>e===1||e===8)?`printers.drying.powerRequired`:t.includes(3)?`printers.drying.retractFilament`:`printers.drying.cannotDryNow`}var XW=[{value:`all`,labelKey:`printers.filter.allStatuses`},{value:`printing`,labelKey:`printers.status.printing`},{value:`paused`,labelKey:`printers.status.paused`},{value:`idle`,labelKey:`printers.status.idle`},{value:`finished`,labelKey:`printers.status.finished`},{value:`error`,labelKey:`printers.status.error`},{value:`offline`,labelKey:`printers.status.offline`}];function XOe(e){return XW.some(t=>t.value===e)}function ZW(e){return(e??.02).toFixed(3)}function QW({k:e,reserve:t}){let{t:n}=U(),r=`text-[length:var(--pc-t8,8px)] text-bambu-gray tabular-nums leading-none truncate`;return e?(0,G.jsxs)(`div`,{className:r,title:n(`ams.kFactor`),children:[n(`ams.kFactorShort`),` `,ZW(e)]}):t?(0,G.jsx)(`div`,{className:r,"aria-hidden":`true`,children:`\xA0`}):null}function $W({side:e}){let{mode:t}=Pd(),{t:n}=U();return(0,G.jsx)(`span`,{className:`inline-flex items-center justify-center w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] text-[length:var(--pc-t10,10px)] font-bold rounded`,style:{backgroundColor:t===`dark`?`#1a4d2e`:`#e7f5e9`,color:`#00ae42`},title:n(e===`L`?`common.left`:`common.right`),children:e})}function eG({inlet:e,title:t}){let{mode:n}=Pd();return(0,G.jsx)(`span`,{className:`inline-flex items-center justify-center w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] text-[length:var(--pc-t10,10px)] font-bold rounded`,style:{backgroundColor:n===`dark`?`#1e3a5f`:`#e3f0fb`,color:`#3b82f6`},title:t,children:pp[e]})}function tG(e,t,n,r){let i=n[String(e)];if(i)return{kind:`inlet`,inlet:i};let a=t[String(e)],o=a===void 0?r?void 0:e>=128?e-128:e:a;return o===1?{kind:`nozzle`,side:`L`}:o===0?{kind:`nozzle`,side:`R`}:null}function nG(e,t){if(!e)return``;if(e.includes(`hardened`))return t(`printers.nozzleHardenedSteel`);if(e.includes(`stainless`))return t(`printers.nozzleStainlessSteel`);if(e.includes(`tungsten`))return t(`printers.nozzleTungstenCarbide`);if(e.length>=4){let n=e.slice(2,4);if(n===`00`)return t(`printers.nozzleStainlessSteel`);if(n===`01`)return t(`printers.nozzleHardenedSteel`);if(n===`05`)return t(`printers.nozzleTungstenCarbide`)}return e===`00`?t(`printers.nozzleStainlessSteel`):e===`01`?t(`printers.nozzleHardenedSteel`):e===`05`?t(`printers.nozzleTungstenCarbide`):e.startsWith(`H`)?t(`printers.nozzleHardenedSteel`):e}function rG(e,t){return e?e.startsWith(`HH`)?t(`printers.nozzleHighFlow`):e.startsWith(`HS`)?t(`printers.nozzleStandardFlow`):``:``}function iG({slot:e,index:t,activeStatus:n,filamentName:r,children:i}){let{t:a}=U(),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(`top`),u=(0,y.useRef)(null),d=(0,y.useRef)(null),f=(0,y.useRef)(null),p=!e.nozzle_diameter&&!e.nozzle_type,m=e.stat===1;(0,y.useEffect)(()=>{if(o&&u.current&&d.current){let e=u.current.getBoundingClientRect(),t=d.current.offsetHeight,n=e.top-56,r=window.innerHeight-e.bottom;n<t+12&&r>n?l(`bottom`):l(`top`)}},[o]);let h=()=>{f.current&&clearTimeout(f.current),f.current=setTimeout(()=>s(!0),80)},g=()=>{f.current&&clearTimeout(f.current),f.current=setTimeout(()=>s(!1),100)};(0,y.useEffect)(()=>()=>{f.current&&clearTimeout(f.current)},[]);let _=Af(e.filament_color),v=nG(e.nozzle_type,a),b=rG(e.nozzle_type,a);return(0,G.jsxs)(`div`,{ref:u,className:`relative`,onMouseEnter:h,onMouseLeave:g,children:[i,o&&(0,G.jsxs)(`div`,{ref:d,className:`
+          `})]}),document.body)]})}function EU({isOpen:e,onClose:t,tagUid:n,trayUuid:r,printerId:i,amsId:a,trayId:o}){let{t:s}=U(),c=co(),{showToast:l}=Gd(),[u,d]=(0,y.useState)(``),f=r||n,{data:p,isLoading:m}=K({queryKey:[`unlinked-spools`],queryFn:Z.getUnlinkedSpools,enabled:e}),h=(0,y.useMemo)(()=>p?p.filter(e=>{if(!u)return!0;let t=u.toLowerCase();return e.filament_name&&e.filament_name.toLowerCase().includes(t)||e.filament_vendor&&e.filament_vendor.toLowerCase().includes(t)||e.filament_material&&e.filament_material.toLowerCase().includes(t)||String(e.id).includes(t)}):[],[p,u]),g=q({mutationFn:e=>Z.linkSpool(e,{spoolTag:f,printerId:i,amsId:a,trayId:o}),onSuccess:()=>{c.invalidateQueries({queryKey:[`unlinked-spools`]}),c.invalidateQueries({queryKey:[`linked-spools`]}),c.invalidateQueries({queryKey:[`spoolman-slot-assignments`]}),l(s(`spoolman.linkSuccess`),`success`),t()},onError:e=>{l(e.message||s(`spoolman.linkFailed`),`error`)}});return e?(0,G.jsxs)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60 backdrop-blur-sm`,onClick:t}),(0,G.jsxs)(`div`,{className:`relative bg-bambu-dark-secondary rounded-xl shadow-xl w-full max-w-md mx-4 max-h-[80vh] flex flex-col border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-white/10`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h3`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Xc,{className:`w-5 h-5 text-bambu-green`}),s(`spoolman.selectSpool`)]}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:[`AMS `,a,` T`,o,` · Printer #`,i]})]}),(0,G.jsx)(`button`,{onClick:t,className:`p-1 text-bambu-gray hover:text-white rounded transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 border-b border-white/10`,children:[(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:u,onChange:e=>d(e.target.value),placeholder:s(`inventory.searchSpools`),className:`w-full pl-9 pr-3 py-2 bg-bambu-dark rounded-lg border border-white/10 text-white text-sm placeholder:text-bambu-gray focus:outline-none focus:border-bambu-green`})]}),(r||n)&&(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-2 font-mono truncate`,title:r||n,children:[`Tag: `,r||n]})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto p-2 min-h-0`,children:m?(0,G.jsx)(`div`,{className:`flex justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin text-bambu-green`})}):h.length===0?(0,G.jsx)(`p`,{className:`text-center text-bambu-gray py-8 text-sm`,children:s(`inventory.noSpoolsMatch`)}):h.map(e=>(0,G.jsxs)(`button`,{onClick:()=>g.mutate(e.id),disabled:g.isPending||!f,className:`w-full flex items-center gap-3 p-3 rounded-lg hover:bg-white/5 transition-colors text-left`,children:[(0,G.jsx)(`span`,{className:`w-6 h-6 rounded-full border border-black/20 flex-shrink-0`,style:kf(e.filament_color_hex)}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-sm text-white font-medium truncate`,children:e.filament_name||s(`spoolman.spoolId`)}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray truncate`,children:[e.filament_vendor?`${e.filament_vendor} · `:``,e.filament_material||`Unknown`,` · #`,e.id]})]}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:e.remaining_weight==null?`—`:`${Math.round(e.remaining_weight)}g`})]},e.id))}),(0,G.jsx)(`div`,{className:`p-4 border-t border-white/10 flex justify-end`,children:(0,G.jsx)(Q,{variant:`ghost`,onClick:t,children:s(`inventory.cancel`)||`Cancel`})})]})]}):null}function nOe(e,t){if(!t)return!0;let n=t.toLowerCase();return String(e.id).includes(n)||e.material.toLowerCase().includes(n)||(e.brand?.toLowerCase().includes(n)??!1)||(e.color_name?.toLowerCase().includes(n)??!1)||(Ef(e.color_name,e.rgba,e.color_name_is_synthesized)?.toLowerCase().includes(n)??!1)||(e.subtype?.toLowerCase().includes(n)??!1)||(e.note?.toLowerCase().includes(n)??!1)||(e.slicer_filament_name?.toLowerCase().includes(n)??!1)||(e.storage_location?.toLowerCase().includes(n)??!1)}function DU(e,t){return t?e.filter(e=>nOe(e,t)):e}function OU({isOpen:e,onClose:t,printerId:n,amsId:r,trayId:i,trayInfo:a,spoolmanEnabled:o}){let{t:s}=U(),c=co(),{showToast:l}=Gd(),[u,d]=(0,y.useState)(!1),[f,p]=(0,y.useState)(null),[m,h]=(0,y.useState)(null);(0,y.useEffect)(()=>{p(null),h(null)},[u]);let[g,_]=(0,y.useState)(``),[v,b]=(0,y.useState)(null),[x,S]=(0,y.useState)(!1),[C,w]=(0,y.useState)(null);(0,y.useEffect)(()=>{e&&d(!1)},[e]);let{data:T,isLoading:E}=K({queryKey:[`inventory-spools`,`assign-modal`],queryFn:()=>Z.getSpools(!0),enabled:e&&!o}),{data:D}=K({queryKey:[`spool-assignments`],queryFn:()=>Z.getAssignments(),enabled:e}),{data:O}=K({queryKey:[`settings`],queryFn:()=>Z.getSettings(),enabled:e}),{data:k,isLoading:A}=K({queryKey:[`spoolman-inventory-spools`,`assign-modal`],queryFn:()=>Z.getSpoolmanInventorySpools(!1),enabled:e&&!!o}),{data:j}=K({queryKey:[`spoolman-slot-assignments-all`],queryFn:()=>Z.getSpoolmanSlotAssignments(),enabled:e&&!!o}),M=(0,y.useMemo)(()=>j?new Set(j.filter(e=>!(e.printer_id===n&&e.ams_id===r&&e.tray_id===i)).map(e=>e.spoolman_spool_id)):new Set,[j,n,r,i]),N=()=>{Z.refreshPrinterStatus(n).catch(()=>{}),c.invalidateQueries({queryKey:[`printerStatus`,n]})},P=q({mutationFn:e=>Z.assignSpool({spool_id:e,printer_id:n,ams_id:r,tray_id:i}),onSuccess:e=>{c.setQueryData([`spool-assignments`],t=>{let a=(t||[]).filter(e=>!(e.printer_id===n&&e.ams_id===r&&e.tray_id===i));return a.push(e),a}),c.invalidateQueries({queryKey:[`spool-assignments`]}),N(),l(s(e.pending_config?`inventory.assignPendingInsert`:`inventory.assignSuccess`),`success`),S(!1),b(null),w(null),t()},onError:e=>{l(`${s(`inventory.assignFailed`)}: ${e.message}`,`error`)}}),F=q({mutationFn:e=>Z.assignSpoolmanSlot({spoolman_spool_id:e,printer_id:n,ams_id:r,tray_id:i}),onSuccess:()=>{c.invalidateQueries({queryKey:[`spoolman-inventory-spools`]}),c.invalidateQueries({queryKey:[`spoolman-slot-assignments`]}),N(),l(s(`inventory.assignSuccess`),`success`),t()},onError:e=>{l(`${s(`inventory.assignFailed`)}: ${e.message}`,`error`)}}),I=e=>(e??``).trim().toUpperCase(),L=(e,t)=>{let n=I(e),r=I(t);return!n||!r?`none`:n===r?`exact`:r.includes(n)||n.includes(r)?`partial`:`none`},R=e=>e.split(`@`)[0].trim(),z=(e,t)=>{let n=R(I(e)),r=R(I(t));return!n||!r?!1:n===r};if(!e)return null;let B=new Set((D||[]).filter(e=>!(e.printer_id===n&&e.ams_id===r&&e.tray_id===i)).map(e=>e.spool_id)),V=T?.filter(e=>!e.archived_at&&(u||!B.has(e.id))),ee=V;if(!u){let e=R(I(a?.profile)),t=I(a?.material||a?.type);(e||t)&&(ee=ee?.filter(n=>{let r=R(I(n.slicer_filament_name||n.slicer_filament)),i=I(n.material);return e&&r&&r===e?!0:t&&i?i===t||t.includes(i)||i.includes(t):!r&&!i}))}g&&ee&&(ee=DU(ee,g));let te=()=>{if(m!==null){F.mutate(m);return}if(!f)return;let e=T?.find(e=>e.id===f);if(!e){l(s(`inventory.assignFailed`),`error`);return}if(!O?.disable_filament_warnings&&a){let t=a.material||a.type,n=L(e.material,t),r=e.slicer_filament_name||e.slicer_filament,i=a.profile||a.type,o=z(r,i);if(n!==`exact`){let a;a=n===`none`&&!o?`material_profile`:n===`partial`&&!o?`partial_profile`:n===`none`?`material`:`partial`,b(f),w({type:a,spoolMaterial:e.material||``,trayMaterial:t||``,spoolProfile:r||void 0,trayProfile:i||void 0}),S(!0);return}}P.mutate(f)},ne=()=>{v&&(P.mutate(v),S(!1),b(null))};return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`fixed inset-0 z-[100] flex items-start sm:items-center justify-center p-4 overflow-y-auto`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60 backdrop-blur-sm`,onClick:t}),(0,G.jsxs)(`div`,{className:`relative w-full max-w-2xl bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-2xl max-h-[90vh] overflow-hidden flex flex-col my-auto`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Sl,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:s(`inventory.assignSpool`)})]}),(0,G.jsx)(`button`,{onClick:t,className:`p-1 text-bambu-gray hover:text-white rounded transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-4 overflow-y-auto`,children:[a&&(0,G.jsxs)(`div`,{className:`p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mb-1`,children:[s(`inventory.selectSpool`),`:`]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[a.color&&(0,G.jsx)(`span`,{className:`w-4 h-4 rounded-full border border-black/20`,style:kf(a.color)}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:a.type||s(`ams.emptySlot`)}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[`(`,a.location,`)`]})]})]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:g,onChange:e=>_(e.target.value),placeholder:s(`inventory.searchSpools`),className:`w-full pl-9 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray focus:outline-none focus:border-bambu-green`})]}),(0,G.jsxs)(`div`,{className:`space-y-3`,children:[!o&&(E?(0,G.jsx)(`div`,{className:`flex justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})}):ee&&ee.length>0?(0,G.jsx)(`div`,{className:`max-h-96 overflow-y-auto grid grid-cols-2 sm:grid-cols-3 gap-2`,children:ee.map(e=>(0,G.jsxs)(`button`,{onClick:()=>{p(e.id),h(null)},title:e.note||void 0,className:`p-2.5 rounded-lg border text-left transition-colors ${f===e.id?`bg-bambu-green/20 border-bambu-green`:`bg-bambu-dark border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:[(0,G.jsxs)(`p`,{className:`text-white text-sm font-medium truncate`,children:[e.brand?`${e.brand} `:``,e.material,e.subtype?` ${e.subtype}`:``]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 mt-1`,children:[e.rgba&&(0,G.jsx)(`span`,{className:`w-3 h-3 rounded-full border border-black/20 flex-shrink-0`,style:kf(e.rgba)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray truncate`,children:Ef(e.color_name,e.rgba,e.color_name_is_synthesized)||``})]}),e.label_weight&&(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:[Math.max(0,Math.round(e.label_weight-e.weight_used)),` / `,e.label_weight,`g`]}),e.note&&(0,G.jsx)(`p`,{className:`text-[10px] text-bambu-gray/70 mt-1 truncate`,title:e.note,children:e.note})]},e.id))}):V&&V.length===0?(0,G.jsxs)(`div`,{className:`text-center py-8 text-bambu-gray`,children:[(0,G.jsx)(`p`,{children:s(`inventory.noAvailableSpools`)}),T&&(0,G.jsxs)(`p`,{className:`text-[10px] mt-2 opacity-60`,children:[T.length,` fetched · `,T.filter(e=>e.archived_at).length,` archived ·`,` `,T.filter(e=>B.has(e.id)).length,` assigned to other slots`]})]}):(0,G.jsxs)(`div`,{className:`text-center py-8 text-bambu-gray`,children:[(0,G.jsx)(`p`,{children:s(`inventory.noSpoolsMatch`)}),V&&(0,G.jsxs)(`p`,{className:`text-[10px] mt-2 opacity-60`,children:[V.length,` unassigned spools — `,V.length-(ee?.length??0),` filtered by tray match. Try "Show all spools".`]})]})),o&&(0,G.jsx)(G.Fragment,{children:A?(0,G.jsx)(`div`,{className:`flex justify-center py-4`,children:(0,G.jsx)(Y,{className:`w-5 h-5 text-bambu-green animate-spin`})}):k&&k.filter(e=>!e.archived_at&&!M.has(e.id)).length>0?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`p`,{className:`text-xs font-medium text-bambu-gray uppercase tracking-wide pt-1`,children:s(`inventory.spoolmanSpools`)}),(0,G.jsx)(`div`,{className:`max-h-64 overflow-y-auto grid grid-cols-2 sm:grid-cols-3 gap-2`,children:DU(k.filter(e=>!e.archived_at&&!M.has(e.id)),g).map(e=>(0,G.jsxs)(`button`,{onClick:()=>{h(e.id),p(null)},title:e.note||void 0,className:`p-2.5 rounded-lg border text-left transition-colors ${m===e.id?`bg-bambu-green/20 border-bambu-green`:`bg-bambu-dark border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:[(0,G.jsxs)(`p`,{className:`text-white text-sm font-medium truncate`,children:[e.brand?`${e.brand} `:``,e.material,e.subtype?` ${e.subtype}`:``]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 mt-1`,children:[e.rgba&&(0,G.jsx)(`span`,{className:`w-3 h-3 rounded-full border border-black/20 flex-shrink-0`,style:kf(e.rgba)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray truncate`,children:Ef(e.color_name,e.rgba,e.color_name_is_synthesized)||``})]}),e.label_weight&&(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:[Math.max(0,Math.round(e.label_weight-e.weight_used)),` / `,e.label_weight,`g`]}),e.note&&(0,G.jsx)(`p`,{className:`text-[10px] text-bambu-gray/70 mt-1 truncate`,title:e.note,children:e.note})]},`spoolman-${e.id}`))})]}):null})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-between items-center p-4 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{id:`disable-filtering-toggle`,type:`checkbox`,checked:u,onChange:()=>d(e=>!e),className:`accent-bambu-green w-4 h-4 rounded focus:ring-0 border-bambu-dark-tertiary`}),(0,G.jsx)(`label`,{htmlFor:`disable-filtering-toggle`,className:`text-xs text-bambu-gray select-none cursor-pointer`,children:s(`inventory.showAllSpools`)})]}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:t,children:s(`common.cancel`)}),(0,G.jsx)(Q,{onClick:te,disabled:!f&&m===null||P.isPending||F.isPending,children:P.isPending||F.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),s(`inventory.assigning`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Sl,{className:`w-4 h-4`}),s(`inventory.assignSpool`)]})})]})]}),P.isError&&(0,G.jsx)(`div`,{className:`mx-4 mb-4 p-2 bg-red-100 dark:bg-red-500/20 border border-red-300 dark:border-red-500/50 rounded text-sm text-red-700 dark:text-red-400`,children:P.error.message})]})]}),x&&a&&f&&C&&(()=>{let e=``;return C.type===`material`?e=s(`inventory.assignMismatchMessage`,{spoolMaterial:C.spoolMaterial,trayMaterial:C.trayMaterial,location:a.location}):C.type===`partial`?e=s(`inventory.assignPartialMismatchMessage`,{spoolMaterial:C.spoolMaterial,trayMaterial:C.trayMaterial,location:a.location}):C.type===`material_profile`?e=`${s(`inventory.assignMismatchMessage`,{spoolMaterial:C.spoolMaterial,trayMaterial:C.trayMaterial,location:a.location})}\n\n${s(`inventory.assignProfileMismatchMessage`,{spoolProfile:C.spoolProfile||s(`common.unknown`),trayProfile:C.trayProfile||s(`common.unknown`),location:a.location})}`:C.type===`partial_profile`&&(e=`${s(`inventory.assignPartialMismatchMessage`,{spoolMaterial:C.spoolMaterial,trayMaterial:C.trayMaterial,location:a.location})}\n\n${s(`inventory.assignProfileMismatchMessage`,{spoolProfile:C.spoolProfile||s(`common.unknown`),trayProfile:C.trayProfile||s(`common.unknown`),location:a.location})}`),e=`${e}\n\n${s(`inventory.assignReconfigureNote`)}`,(0,G.jsx)(rf,{title:s(`inventory.assignMismatchTitle`),message:e,confirmText:s(`inventory.assignMismatchConfirm`),variant:`warning`,overlayZIndex:`z-[110]`,isLoading:P.isPending,onConfirm:ne,onCancel:()=>{P.isPending||(S(!1),b(null),w(null))}})})()]})}var rOe={bambuModelByShortCode:{}},kU={"A1 MINI":[`A1M`],"H2D PRO":[`H2DP`]};function AU(e,t){let n=e.toUpperCase(),r=t.toUpperCase();if(n===r)return!0;let i=kU[r];if(i&&i.includes(n))return!0;let a=kU[n];return!!(a&&a.includes(r))}function iOe(e){let t={};for(let[n,r]of Object.entries(e))r in t||(t[r]=n.replace(/^Bambu Lab\s+/,``));return t}function jU(e={}){return{bambuModelByShortCode:iOe(e)}}function MU(e){return e.replace(/\s+/g,``).toLowerCase()}function NU(e){return e.replace(/^#\s*/,``).trim()}var aOe=`0.4`;function PU(e){let t=e.match(/^(.*?)\s+([\d.]+)\s*nozzle\s*$/i);return t?{stripped:t[1].trim(),nozzle:t[2]}:{stripped:e.trim(),nozzle:null}}function oOe(e){let t=e.indexOf(`@BBL `);if(t<0)return null;let{stripped:n,nozzle:r}=PU(e.slice(t+5).trim());return n?{token:n,nozzle:r}:null}function FU(e){let t=NU(e).match(/^Bambu Lab\s+(.+)$/i);if(!t)return null;let{stripped:n,nozzle:r}=PU(t[1]);return n?{model:n,nozzle:r}:null}function sOe(e){return e.replace(/\s*\([^)]*\)\s*$/,``).trim()}var cOe=.1,lOe=2;function IU(e,t){let n=Number.parseFloat(e),r=Number.parseFloat(t);return Number.isNaN(n)||Number.isNaN(r)?!1:n===r}function uOe(e){let t=sOe(e),n=oOe(t);if(n)return n;let r=t.lastIndexOf(`@`);if(r<0)return null;let i=t.slice(r+1).trim(),a=FU(i);if(a)return{token:a.model,nozzle:a.nozzle};let o=i.match(/^([\d.]+)\s*(?:mm)?\s*(?:nozzle)?$/i);if(o){let e=Number.parseFloat(o[1]);if(!Number.isNaN(e)&&e>=cOe&&e<=lOe)return{token:null,nozzle:o[1]}}return null}function dOe(e,t,n){let r=uOe(e);if(!r)return`unknown`;let i=FU(t);if(!i)return`unknown`;if(r.token===null)return i.nozzle!==null&&r.nozzle!==null&&!IU(r.nozzle,i.nozzle)?`mismatch`:`unknown`;let a=n[r.token]??r.token;return MU(i.model)!==MU(a)&&!AU(r.token,i.model)||i.nozzle!==null&&!IU(r.nozzle??aOe,i.nozzle)?`mismatch`:`match`}function LU(e,t,n,r){if(!n)return`unknown`;let i=e.compatible_printers;if(i&&i.length>0){let e=NU(n);return i.some(t=>NU(t)===e)?`match`:`mismatch`}return dOe(e.name,n,r.bambuModelByShortCode)}function fOe(e){let t=e.replace(/[.*+?^${}()|[\]\\]/g,`\\$&`).replace(/\s+/g,`\\s+`);return RegExp(`\\b${t}\\b`,`i`)}function RU(e,t){let n=e.indexOf(`@`);if(n>=0){let r=e.slice(n+1).trim(),i=r.match(/^BBL\s+(.+?)(?:\s+[\d.]+\s*nozzle)?$/i);if(i)return i[1].trim();let a=r.match(/^Bambu Lab\s+(.+?)(?:\s+[\d.]+\s*nozzle)?$/i);if(a){let e=a[1].trim(),n=`Bambu Lab ${e}`;if(t[n])return t[n];let r=n.toLowerCase();for(let[e,n]of Object.entries(t))if(e.toLowerCase()===r)return n;return e}}let r=[],i=new Set;for(let[e,n]of Object.entries(t)){let t=e.replace(/^Bambu Lab\s+/,``),a=t.toLowerCase();i.has(a)||(r.push({token:t,short:n}),i.add(a));let o=n.toLowerCase();i.has(o)||(r.push({token:n,short:n}),i.add(o))}r.sort((e,t)=>t.token.length-e.token.length);for(let{token:t,short:n}of r)if(fOe(t).test(e))return n;return null}var zU=[`PLA`,`PETG`,`ABS`,`TPU`,`ASA`,`PC`,`PA`,`PVA`,`HIPS`,`PA-CF`,`PETG-CF`,`PLA-CF`],BU=[`Bambu`,`PolyLite`,`PolyTerra`,`eSUN`,`Overture`,`Fiberon`,`SUNLU`,`Inland`,`Hatchbox`,`Generic`],VU=`Basic.Matte.Silk.Silk+.Tough.Tough+.HF.High Flow.Engineering.CF.GF.Galaxy.Glow.Marble.Metal.Rainbow.Sparkle.Wood.Translucent.Transparent.Clear.Lite.Pro.Plus.Max.Super.Ultra.Flex.Soft.Hard.Strong.Impact.Heat Resistant.UV Resistant.ESD.Conductive.Magnetic.Gradient.Dual Color.Tri Color.Multicolor`.split(`.`),HU=[{name:`Black`,hex:`000000`},{name:`White`,hex:`FFFFFF`},{name:`Gray`,hex:`808080`},{name:`Red`,hex:`FF0000`},{name:`Orange`,hex:`FFA500`},{name:`Yellow`,hex:`FFFF00`},{name:`Green`,hex:`00AE42`},{name:`Blue`,hex:`0066FF`},{name:`Purple`,hex:`8B00FF`},{name:`Pink`,hex:`FF69B4`},{name:`Brown`,hex:`8B4513`},{name:`Silver`,hex:`C0C0C0`},{name:`Clear`,hex:`00000000`}],pOe=[{name:`Dark Red`,hex:`8B0000`},{name:`Crimson`,hex:`DC143C`},{name:`Coral`,hex:`FF7F50`},{name:`Salmon`,hex:`FA8072`},{name:`Dark Orange`,hex:`FF8C00`},{name:`Peach`,hex:`FFDAB9`},{name:`Gold`,hex:`FFD700`},{name:`Khaki`,hex:`F0E68C`},{name:`Lemon`,hex:`FFF44F`},{name:`Lime`,hex:`32CD32`},{name:`Forest Green`,hex:`228B22`},{name:`Olive`,hex:`808000`},{name:`Mint`,hex:`98FF98`},{name:`Teal`,hex:`008080`},{name:`Navy`,hex:`000080`},{name:`Sky Blue`,hex:`87CEEB`},{name:`Royal Blue`,hex:`4169E1`},{name:`Cyan`,hex:`00FFFF`},{name:`Turquoise`,hex:`40E0D0`},{name:`Violet`,hex:`EE82EE`},{name:`Magenta`,hex:`FF00FF`},{name:`Indigo`,hex:`4B0082`},{name:`Lavender`,hex:`E6E6FA`},{name:`Plum`,hex:`DDA0DD`},{name:`Hot Pink`,hex:`FF69B4`},{name:`Rose`,hex:`FF007F`},{name:`Blush`,hex:`FFB6C1`},{name:`Chocolate`,hex:`D2691E`},{name:`Tan`,hex:`D2B48C`},{name:`Beige`,hex:`F5F5DC`},{name:`Maroon`,hex:`800000`},{name:`Dark Gray`,hex:`404040`},{name:`Light Gray`,hex:`D3D3D3`},{name:`Charcoal`,hex:`36454F`},{name:`Ivory`,hex:`FFFFF0`},{name:`Bambu Green`,hex:`00AE42`},{name:`Jade White`,hex:`E8E8E8`},{name:`Titan Gray`,hex:`5A5A5A`}],UU=[...HU,...pOe],WU=`bambuddy-recent-colors`,GU=[`0.2`,`0.4`,`0.6`,`0.8`];async function KU(e,t){let n=Bp(t),r=Array.from(new Set([...GU,...n])),i=[];for(let t of r)i.push(await Z.getKProfiles(e,t).catch(()=>null));let a=[];for(let e of i)if(e)for(let t of e.profiles)a.push({cali_idx:t.slot_id,filament_id:t.filament_id,setting_id:t.setting_id||``,name:t.name,k_value:parseFloat(t.k_value)||0,n_coef:parseFloat(t.n_coef)||0,extruder_id:t.extruder_id,nozzle_diameter:t.nozzle_diameter,nozzle_id:t.nozzle_id});return a}var mOe=[{code:`GFL00`,name:`Bambu PLA Basic`,displayName:`Bambu PLA Basic`,isCustom:!1,allCodes:[`GFL00`],source:`builtin`},{code:`GFL01`,name:`Bambu PLA Matte`,displayName:`Bambu PLA Matte`,isCustom:!1,allCodes:[`GFL01`],source:`builtin`},{code:`GFL05`,name:`Generic PLA`,displayName:`Generic PLA`,isCustom:!1,allCodes:[`GFL05`],source:`builtin`},{code:`GFG00`,name:`Bambu PETG Basic`,displayName:`Bambu PETG Basic`,isCustom:!1,allCodes:[`GFG00`],source:`builtin`},{code:`GFG05`,name:`Generic PETG`,displayName:`Generic PETG`,isCustom:!1,allCodes:[`GFG05`],source:`builtin`},{code:`GFB00`,name:`Bambu ABS Basic`,displayName:`Bambu ABS Basic`,isCustom:!1,allCodes:[`GFB00`],source:`builtin`},{code:`GFB05`,name:`Generic ABS`,displayName:`Generic ABS`,isCustom:!1,allCodes:[`GFB05`],source:`builtin`},{code:`GFA00`,name:`Bambu ASA Basic`,displayName:`Bambu ASA Basic`,isCustom:!1,allCodes:[`GFA00`],source:`builtin`},{code:`GFU00`,name:`Bambu TPU 95A`,displayName:`Bambu TPU 95A`,isCustom:!1,allCodes:[`GFU00`],source:`builtin`},{code:`GFU05`,name:`Generic TPU`,displayName:`Generic TPU`,isCustom:!1,allCodes:[`GFU05`],source:`builtin`},{code:`GFC00`,name:`Bambu PC Basic`,displayName:`Bambu PC Basic`,isCustom:!1,allCodes:[`GFC00`],source:`builtin`},{code:`GFN00`,name:`Bambu PA Basic`,displayName:`Bambu PA Basic`,isCustom:!1,allCodes:[`GFN00`],source:`builtin`},{code:`GFN05`,name:`Generic PA`,displayName:`Generic PA`,isCustom:!1,allCodes:[`GFN05`],source:`builtin`},{code:`GFS00`,name:`Bambu PLA-CF`,displayName:`Bambu PLA-CF`,isCustom:!1,allCodes:[`GFS00`],source:`builtin`},{code:`GFT00`,name:`Bambu PETG-CF`,displayName:`Bambu PETG-CF`,isCustom:!1,allCodes:[`GFT00`],source:`builtin`},{code:`GFNC0`,name:`Bambu PA-CF`,displayName:`Bambu PA-CF`,isCustom:!1,allCodes:[`GFNC0`],source:`builtin`},{code:`GFV00`,name:`Bambu PVA`,displayName:`Bambu PVA`,isCustom:!1,allCodes:[`GFV00`],source:`builtin`}];function qU(e){let t=e.replace(/@.*$/,``).trim();t=t.replace(/\(Custom\)/i,``).trim(),t=t.replace(/^[#*]+\s*/,``).trim();let n=`PLA-CF.PETG-CF.ABS-GF.ASA-CF.PA-CF.PAHT-CF.PA6-CF.PA6-GF.PPA-CF.PPA-GF.PET-CF.PPS-CF.PC-CF.PC-ABS.ABS-GF.PCTG.PETG.PLA.ABS.ASA.PC.PA.TPU.PVA.HIPS.BVOH.PPS.PEEK.PEI`.split(`.`),r=``,i=-1;for(let e of n){let n=t.toUpperCase().indexOf(e.toUpperCase());if(n!==-1){r=e,i=n;break}}let a=``;i>0&&(a=t.substring(0,i).trim(),a=a.replace(/[-_\s]+$/,``));let o=``;i!==-1&&r&&(o=t.substring(i+r.length).trim(),o=o.replace(/^[-_\s]+/,``));let s=``;for(let e of VU)if(o.toLowerCase().includes(e.toLowerCase())){s=e;break}if(!s&&a)for(let e of VU){let t=RegExp(`\\s+${e}$`,`i`);if(t.test(a)){s=e,a=a.replace(t,``).trim();break}}return{brand:a,material:r,variant:s}}function JU(e,t){let n=new Set(BU);for(let t of e){let{brand:e}=qU(t.name);e&&e.length>1&&n.add(e)}if(t)for(let e of t)if(e.filament_vendor&&e.filament_vendor.length>1)n.add(e.filament_vendor);else{let{brand:t}=qU(e.name);t&&t.length>1&&n.add(t)}return Array.from(n).sort((e,t)=>e.localeCompare(t))}function hOe(e){let t=e.filter(e=>e.preset_type===`filament`);return t.length===0?[]:t.map(e=>{let t=String(e.id),n=e.filament_type||t,r=Array.from(new Set([t,n]));return{code:t,name:e.name,displayName:e.name,isCustom:!1,allCodes:r,source:`local`}}).sort((e,t)=>e.displayName.localeCompare(t.displayName))}function YU(e,t,n,r,i){let a=[],o=[],s=new Set;for(let n of e)if(n.is_custom){let e=n.name.toUpperCase();(t.size===0||Array.from(t).some(t=>e.includes(t))||!e.includes(`@`))&&(a.push({code:n.setting_id,name:n.name,displayName:`${n.name} (Custom)`,isCustom:!0,allCodes:[n.setting_id],source:i?.has(n.setting_id)?`orca_cloud`:`cloud`}),s.add(n.setting_id))}else o.push({code:n.setting_id,name:n.name,displayName:n.name,isCustom:!1,allCodes:[n.setting_id],source:i?.has(n.setting_id)?`orca_cloud`:`cloud`}),s.add(n.setting_id);let c=n&&n.length>0?hOe(n):[],l=[];if(r&&r.length>0)for(let e of r){let t=e.filament_id.startsWith(`GF`)?`GFS`+e.filament_id.slice(2):e.filament_id;s.has(e.filament_id)||s.has(t)||l.push({code:e.filament_id,name:e.name,displayName:e.name,isCustom:!1,allCodes:[e.filament_id,t],source:`builtin`})}let u=[...a,...o,...c,...l];return u.length===0?mOe:u.sort((e,t)=>e.displayName.localeCompare(t.displayName))}function XU(e,t){if(!e)return;let n=t.find(t=>t.code===e);if(n||=t.find(t=>t.allCodes.includes(e)),!n){let r=e.toLowerCase();n=t.find(e=>e.code.toLowerCase()===r||e.allCodes.some(e=>e.toLowerCase()===r))}return n}function ZU(e,t){let n=t.trim();return!n||e.some(e=>e.toLowerCase()===n.toLowerCase())?e:[...e,n].sort((e,t)=>e.localeCompare(t))}function QU(e,t,n){if(!t)return[];let r=n.get(t.toLowerCase());return!r||r.size===0?[]:e.filter(e=>r.has(e.toLowerCase()))}function $U(){try{let e=localStorage.getItem(WU);if(e)return JSON.parse(e)}catch{}return[]}function eW(e,t){let n=[e,...t.filter(t=>t.hex.toUpperCase()!==e.hex.toUpperCase())].slice(0,8);try{localStorage.setItem(WU,JSON.stringify(n))}catch{}return n}function tW(e){if(!e)return``;let t=e.split(`_`)[0];return/^GFS/i.test(t)&&(t=t.slice(0,2)+t.slice(3)),t.toUpperCase()}function gOe(e){return!!e&&/^GF[A-Z]99$/i.test(e)}var _Oe={GFB99:`ABS`,GFC99:`PC`,GFG99:`PETG`,GFL99:`PLA`,GFN99:`PA`,GFP99:`PE`,GFR99:`EVA`,GFS99:`PVA`,GFU99:`TPU`};function vOe(e){return e&&_Oe[e.toUpperCase()]||``}function nW(e){let t=e.trim().toUpperCase();return t===`NYLON`?`PA`:t}function yOe(e,t){let n=vOe(e);return!!n&&!!t&&nW(n)===nW(t)}function rW(e,t,n){return`${e}:${t}:${n}`}function iW(e,t){return`${e}\u0000${t}`}function bOe(e){let[t=``,n=``]=e.split(`\0`);return{model:t,diameter:n}}function aW(e,t){if(!t.material)return!1;let n=tW(t.slicer_filament),r=tW(e.filament_id);if(n&&r&&n===r){if(!gOe(r))return!0;let e=t.brand.trim();if((!e||e.toUpperCase()===`GENERIC`)&&yOe(r,t.material))return!0}let i=(e.name||``).replace(/^High Flow[_\s]+/i,``).replace(/^Standard[_\s]+/i,``).replace(/^HF[_\s]+/i,``).replace(/^S[_\s]+/i,``).trim(),a=qU(i);return!(a.material.toUpperCase()!==t.material.toUpperCase()||t.brand&&!(a.brand.toLowerCase().includes(t.brand.toLowerCase())||t.brand.toLowerCase().includes(a.brand.toLowerCase()))||t.subtype&&!(a.variant.toLowerCase().includes(t.subtype.toLowerCase())||t.subtype.toLowerCase().includes(a.variant.toLowerCase())||i.toLowerCase().includes(t.subtype.toLowerCase())))}function oW(){let e=(0,y.useRef)(null),t=(0,y.useCallback)(()=>{e.current!==null&&(clearTimeout(e.current),e.current=null)},[]),n=(0,y.useCallback)((n,r)=>{t(),e.current=setTimeout(()=>{e.current=null,n()},r)},[t]);return(0,y.useEffect)(()=>t,[t]),{schedule:n,cancel:t}}function sW(e){let t=e.includes(`_`)?e.split(`_`)[0]:e;return t.startsWith(`GFS`)?`GF`+t.slice(3):(t.startsWith(`PFUS`)||t.startsWith(`PFSP`),t)}var cW=[`PLA`,`PETG`,`PCTG`,`ABS`,`ASA`,`TPU`,`PC`,`PA`,`NYLON`,`PVA`,`HIPS`,`PP`,`PET`];function lW(e){let t=e.replace(/@.+$/,``).trim(),n=t.toUpperCase(),r=n.match(/\bSUPPORT\s+FOR\s+/);if(r){let e=n.slice(r.index+r[0].length);for(let n of cW)if(RegExp(`\\b${n}\\b`).test(e))return{material:n,brand:t.slice(0,r.index).trim(),variant:`Support`}}for(let e of cW){let r=RegExp(`\\b${e}\\b`,`i`);if(r.test(n)){let n=t.split(r);return{material:e,brand:n[0]?.trim()||``,variant:n[1]?.trim()||``}}}let i=t.split(/\s+/);return i.length>=2?{material:i[1],brand:i[0],variant:i.slice(2).join(` `)}:{material:t,brand:``,variant:``}}function uW(e){return`${e.extruder_id??0}|${e.name}|${e.k_value}`}function dW(e,t){return t===void 0?!1:e.some(e=>(e.extruder_id??0)===t)}function fW(e,t,n){return dW(e,n)?e.find(e=>e.slot_id===t&&(e.extruder_id??0)===n):e.find(e=>e.slot_id===t)}function pW(e,t,n){return t?` \u00b7 ${e.extruder_id===1?n(`common.left`):n(`common.right`)}`:``}function xOe(e){return!e.startsWith(`GF`)&&!e.startsWith(`P1`)}var SOe={white:`FFFFFF`,black:`000000`,red:`FF0000`,green:`00FF00`,blue:`0000FF`,yellow:`FFFF00`,cyan:`00FFFF`,magenta:`FF00FF`,orange:`FFA500`,purple:`800080`,pink:`FFC0CB`,brown:`8B4513`,gray:`808080`,grey:`808080`,"jade white":`FFFEF2`,ivory:`FFFFF0`,beige:`F5F5DC`,cream:`FFFDD0`,silver:`C0C0C0`,gold:`FFD700`,bronze:`CD7F32`,copper:`B87333`,navy:`000080`,teal:`008080`,olive:`808000`,maroon:`800000`,coral:`FF7F50`,salmon:`FA8072`,lime:`32CD32`,mint:`98FF98`,"forest green":`228B22`,"sky blue":`87CEEB`,"royal blue":`4169E1`,turquoise:`40E0D0`,lavender:`E6E6FA`,violet:`EE82EE`,plum:`DDA0DD`,tan:`D2B48C`,chocolate:`D2691E`,charcoal:`36454F`,slate:`708090`,transparent:`000000`,natural:`F5F5DC`,wood:`DEB887`},mW=[{name:`White`,hex:`FFFFFF`},{name:`Black`,hex:`000000`},{name:`Red`,hex:`FF0000`},{name:`Blue`,hex:`0000FF`},{name:`Green`,hex:`00AA00`},{name:`Yellow`,hex:`FFFF00`},{name:`Orange`,hex:`FFA500`},{name:`Gray`,hex:`808080`}],hW=[{name:`Cyan`,hex:`00FFFF`},{name:`Magenta`,hex:`FF00FF`},{name:`Purple`,hex:`800080`},{name:`Pink`,hex:`FFC0CB`},{name:`Brown`,hex:`8B4513`},{name:`Beige`,hex:`F5F5DC`},{name:`Navy`,hex:`000080`},{name:`Teal`,hex:`008080`},{name:`Lime`,hex:`32CD32`},{name:`Gold`,hex:`FFD700`},{name:`Silver`,hex:`C0C0C0`},{name:`Maroon`,hex:`800000`},{name:`Olive`,hex:`808000`},{name:`Coral`,hex:`FF7F50`},{name:`Salmon`,hex:`FA8072`},{name:`Turquoise`,hex:`40E0D0`},{name:`Violet`,hex:`EE82EE`},{name:`Indigo`,hex:`4B0082`},{name:`Chocolate`,hex:`D2691E`},{name:`Tan`,hex:`D2B48C`},{name:`Slate`,hex:`708090`},{name:`Charcoal`,hex:`36454F`},{name:`Ivory`,hex:`FFFFF0`},{name:`Cream`,hex:`FFFDD0`}];function gW(e){return SOe[e.toLowerCase().trim()]||null}function _W({isOpen:e,onClose:t,printerId:n,slotInfo:r,nozzleDiameter:i=`0.4`,printerModel:a,onSuccess:o,fullScreen:s}){let{t:c}=U(),[l,u]=(0,y.useState)(``),[d,f]=(0,y.useState)(null),p=(0,y.useRef)(null);p.current=d;let[m,h]=(0,y.useState)(``),[g,_]=(0,y.useState)(``),[v,b]=(0,y.useState)(``),[x,S]=(0,y.useState)(!1),[C,w]=(0,y.useState)(!1),T=(0,y.useRef)(``),{schedule:E}=oW(),{data:D,isLoading:O,isError:k}=K({queryKey:[`cloudSettings`],queryFn:()=>Z.getCloudSettings(),enabled:e,retry:!1}),{data:A}=K({queryKey:[`orcaCloudProfilesForAmsSlot`],queryFn:()=>Z.orcaCloudListProfiles(),enabled:e,retry:!1}),{data:j,isLoading:M}=K({queryKey:[`localPresets`],queryFn:()=>Z.getLocalPresets(),enabled:e}),{data:N,isLoading:P}=K({queryKey:[`builtinFilaments`],queryFn:()=>Z.getBuiltinFilaments(),enabled:e,staleTime:1/0}),{data:F,isLoading:I}=K({queryKey:[`kprofiles`,n,i],queryFn:()=>Z.getKProfiles(n,i),enabled:e&&!!n}),{data:L}=K({queryKey:[`colorCatalog`],queryFn:()=>Z.getColorCatalog(),enabled:e,staleTime:1/0}),{data:R}=K({queryKey:[`slicerPrinterModels`],queryFn:Z.getSlicerPrinterModels,enabled:e,staleTime:1/0}),{data:z}=K({queryKey:[`slot-spool-defaults`,n,r.amsId,r.trayId],queryFn:()=>Z.getSlotSpoolDefaults(n,r.amsId,r.trayId),enabled:e,staleTime:0}),B=(0,y.useMemo)(()=>jU(R??{}),[R]),V=(0,y.useMemo)(()=>{if(!a||!R)return null;for(let[e,t]of Object.entries(R))if(t===a)return`${e.startsWith(`Bambu Lab `)?e:`Bambu Lab ${e}`} ${i} nozzle`;return null},[a,R,i]),ee=q({mutationFn:async()=>{if(!l)throw Error(`No filament preset selected`);let e=l.startsWith(`local_`),t=l.startsWith(`builtin_`),a=l.startsWith(`orca_`)?l.replace(`orca_`,``):l,o=!e&&!t?A?.filament.find(e=>e.setting_id===a):void 0,s=!!o,c=o??null,u=e?parseInt(l.replace(`local_`,``),10):null,d=t?l.replace(`builtin_`,``):null,f=e?j?.filament.find(e=>e.id===u):null,h=t?N?.find(e=>e.filament_id===d):null,g=!e&&!t&&!s?D?.filament.find(e=>e.setting_id===l):null;if(!e&&!t&&!s&&!g)throw Error(`Selected preset not found`);if(e&&!f)throw Error(`Selected local preset not found`);if(t&&!h)throw Error(`Selected builtin preset not found`);if(s&&!c)throw Error(`Selected Orca Cloud preset not found`);let _=e?f.name:t?h.name:s?c.name:g.name,v=lW(_),y=p.current?.slot_id??-1,b=m||r.trayColor?.slice(0,6)||`FFFFFF`,x=_.replace(/@.+$/,``).trim(),S,C,w=v.material.toUpperCase(),T={PLA:`GFL99`,"PLA-CF":`GFL98`,"PLA SILK":`GFL96`,"PLA HIGH SPEED":`GFL95`,PETG:`GFG99`,"PETG HF":`GFG96`,"PETG-CF":`GFG98`,PCTG:`GFG97`,ABS:`GFB99`,ASA:`GFB98`,PC:`GFC99`,PA:`GFN99`,"PA-CF":`GFN98`,NYLON:`GFN99`,TPU:`GFU99`,PVA:`GFS99`,HIPS:`GFS98`,PE:`GFP99`,PP:`GFP97`};if(e){let e=(cW.includes(w)?w:f?.filament_type||v.material||``).toUpperCase();S=T[e]||T[e.replace(/[-\s]?CF$/,``)]||T[e.replace(/\+$/,``)]||T[e.split(/[-\s]/)[0]]||``,C=``}else if(s){let e=``;try{let t=(await Z.orcaCloudGetProfile(a)).setting?.filament_id;typeof t==`string`&&t&&(e=t)}catch(e){console.warn(`Failed to fetch Orca Cloud profile for filament_id:`,e)}if(S=e,!S){let e=(cW.includes(w)?w:v.material||``).toUpperCase();S=T[e]||T[e.replace(/[-\s]?CF$/,``)]||T[e.replace(/\+$/,``)]||T[e.split(/[-\s]/)[0]]||``}C=``}else if(t)S=d,C=``;else{if(S=sW(l),C=l,!l.startsWith(`GFS`))try{let e=await Z.getCloudSettingDetail(l),t=e.setting?.filament_id,n=e.filament_id||(typeof t==`string`?t:``);n&&(S=n)}catch(e){console.warn(`Failed to fetch preset detail for filament_id:`,e)}/^(PFUS|PFSP|PFCN)/.test(S)&&(console.warn(`Cloud preset ${l} carries no filament_id in either place; sending no tray_info_idx so the printer keeps a resolvable one.`),S=``)}let E=e&&f?.nozzle_temp_min?f.nozzle_temp_min:190,O=e&&f?.nozzle_temp_max?f.nozzle_temp_max:230;if(!e||t||s||!f?.nozzle_temp_min&&!f?.nozzle_temp_max){let t=(e?cW.includes(w)?w:f?.filament_type||v.material||``:v.material).toUpperCase();t.includes(`PLA`)?(E=190,O=230):t.includes(`PETG`)?(E=220,O=260):t.includes(`ABS`)||t.includes(`ASA`)?(E=240,O=280):t.includes(`TPU`)?(E=200,O=240):t===`PCTG`?(E=220,O=260):t.includes(`PC`)?(E=260,O=300):(t.includes(`PA`)||t.includes(`NYLON`))&&(E=250,O=290)}let k=p.current?.k_value?parseFloat(p.current.k_value):0,M=e?cW.includes(w)?w:f?.filament_type||v.material||`PLA`:s&&cW.includes(w)?w:v.material||`PLA`,P=await Z.configureAmsSlot(n,r.amsId,r.trayId,{tray_info_idx:S,tray_type:M,tray_sub_brands:x,tray_color:b+`FF`,nozzle_temp_min:E,nozzle_temp_max:O,cali_idx:y,nozzle_diameter:i,setting_id:C,kprofile_filament_id:p.current?.filament_id,kprofile_setting_id:p.current?.setting_id||void 0,k_value:k}),F=e?`local_${u}`:t?`builtin_${d}`:l,I=e?`local`:t?`builtin`:s?`orca_cloud`:`cloud`;try{await Z.saveSlotPreset(n,r.amsId,r.trayId,F,x,I)}catch(e){console.warn(`Failed to save slot preset mapping:`,e)}return P},onSuccess:()=>{S(!0),o?.(),E(()=>{S(!1),t()},1500)}}),te=q({mutationFn:async()=>Z.resetAmsSlot(n,r.amsId,r.trayId),onSuccess:()=>{S(!0),o?.(),E(()=>{S(!1),t()},1500)}}),ne=(0,y.useMemo)(()=>{let e=v.toLowerCase(),t=[],n=new Set,i=r.savedPresetId,o=r.trayInfoIdx;if(A?.filament)for(let r of A.filament){let i=`orca_${r.setting_id}`;if(n.add(r.setting_id),n.add(i),!(e&&!r.name.toLowerCase().includes(e))){if(a){let e=RU(r.name,R??{});if(e&&!AU(e,a))continue}t.push({id:i,name:r.name,source:`orca_cloud`,isUser:!0})}}if(D?.filament)for(let r of D.filament){if(n.has(r.setting_id))continue;n.add(r.setting_id);let s=i===r.setting_id||o&&(r.setting_id===o||sW(r.setting_id)===o);if(!(e&&!r.name.toLowerCase().includes(e))){if(!s&&a){let e=RU(r.name,R??{});if(e&&!AU(e,a))continue}t.push({id:r.setting_id,name:r.name,source:`cloud`,isUser:xOe(r.setting_id)})}}if(j?.filament){let n=r.savedPresetId;for(let r of j.filament){let i=`local_${r.id}`;if(!(e&&!r.name.toLowerCase().includes(e))){if(n!==i&&V){let e=null;if(r.compatible_printers)try{let t=JSON.parse(r.compatible_printers);Array.isArray(t)&&(e=t.filter(e=>typeof e==`string`))}catch{e=null}if(LU({name:r.name,compatible_printers:e},`filament`,V,B)===`mismatch`)continue}t.push({id:i,name:r.name,source:`local`,isUser:!1})}}}if(N)for(let r of N){if(n.has(r.filament_id))continue;let i=r.filament_id.startsWith(`GF`)?`GFS`+r.filament_id.slice(2):r.filament_id;n.has(i)||(!e||r.name.toLowerCase().includes(e))&&t.push({id:`builtin_${r.filament_id}`,name:r.name,source:`builtin`,isUser:!1})}return t.sort((e,t)=>{let n={local:0,orca_cloud:1,cloud:2,builtin:3};return e.source===t.source?e.isUser&&!t.isUser?-1:!e.isUser&&t.isUser?1:e.name.localeCompare(t.name):n[e.source]-n[t.source]})},[A?.filament,D?.filament,j?.filament,N,v,a,r.savedPresetId,r.trayInfoIdx,V,B,R]),re=(0,y.useMemo)(()=>{if(!l)return null;let e=null,t=``;if(l.startsWith(`local_`)){let t=parseInt(l.replace(`local_`,``),10);e=j?.filament.find(e=>e.id===t)?.name||null}else if(l.startsWith(`builtin_`)){let n=l.replace(`builtin_`,``);e=N?.find(e=>e.filament_id===n)?.name||null,t=tW(n)}else{let n=l.startsWith(`orca_`)?l.replace(`orca_`,``):l,r=A?.filament.find(e=>e.setting_id===n);if(r)e=r.name;else if(D?.filament){let n=D.filament.find(e=>e.setting_id===l);e=n?.name||null,n&&(t=tW(n.setting_id))}}if(!e)return null;let n=e.replace(/@.+$/,``).trim();n.startsWith(`# `)&&(n=n.slice(2).trim());let r=lW(n);return{fullName:n,material:r.material,brand:r.brand,filamentId:t}},[l,D?.filament,j?.filament,N,A?.filament]),ie=re?.fullName||``,ae=(0,y.useMemo)(()=>{if(!L||!re)return[];let{fullName:e,brand:t}=re,n=e.replace(/^(Bambu\s*(Lab)?|eSUN|Polymaker|Overture|Sunlu|Hatchbox)\s*/i,``).trim();return L.filter(e=>{let r=(e.material||``).toUpperCase(),i=e.manufacturer.toUpperCase();if(!(r===n.toUpperCase()||r.includes(n.toUpperCase())||n.toUpperCase().includes(r)))return!1;if(t){let e=t.toUpperCase();if(!i.includes(e)&&!e.includes(i))return!1}return!0})},[L,re]),oe=(0,y.useMemo)(()=>new Set((F?.profiles??[]).map(e=>e.extruder_id??0)).size>1,[F?.profiles]),se=(0,y.useMemo)(()=>{if(!F?.profiles)return[];if(!re){let e=r.caliIdx;if(e!=null&&e>0){let t=fW(F.profiles,e,r.extruderId);if(t)return[t]}return[]}let{fullName:e,material:t,brand:n,filamentId:i}=re,a=e.toUpperCase(),o=t.toUpperCase(),s=n.toUpperCase()===`GENERIC`?``:n.toUpperCase(),c=i;if(!o||o.length<2)return[];let l=F.profiles.filter(e=>{if(c){let t=tW(e.filament_id);if(t&&t===c)return!0}let t=e.name.toUpperCase();if(s)return!(!t.includes(s)||!t.includes(o));if(t.includes(a)||t.includes(o))return!0;let n={NYLON:[`PA`,`PA-CF`,`PA6`],PA:[`NYLON`]}[o]||[];for(let e of n)if(t.includes(e))return!0;return!1}),u=dW(F.profiles,r.extruderId)?l.filter(e=>(e.extruder_id??0)===r.extruderId):l,d=new Map;for(let e of u){let t=uW(e);d.has(t)||d.set(t,e)}let f=Array.from(d.values()),p=r.caliIdx;if(p!=null&&p>0&&!f.some(e=>e.slot_id===p)){let e=fW(F.profiles,p,r.extruderId);e&&f.unshift(e)}return f},[F?.profiles,re,r.extruderId,r.caliIdx]),H=(0,y.useMemo)(()=>{if(!F?.profiles)return[];let e=new Set(se.map(e=>uW(e))),t=new Map;for(let n of F.profiles){let r=uW(n);e.has(r)||t.has(r)||t.set(r,n)}return Array.from(t.values()).sort((e,t)=>e.name.localeCompare(t.name))},[F?.profiles,se]),ce=se.length>0||H.length>0,le=(0,y.useCallback)(e=>{if(!e){f(null);return}f(se.find(t=>uW(t)===e)||H.find(t=>uW(t)===e)||null)},[se,H]);(0,y.useEffect)(()=>{if(e){if(z?.slicer_filament)u(z.slicer_filament);else if(r.savedPresetId)u(r.savedPresetId);else if(r.trayInfoIdx&&D?.filament){let e=D.filament.find(e=>e.setting_id===r.trayInfoIdx);e||=D.filament.find(e=>sW(e.setting_id)===r.trayInfoIdx),e&&u(e.setting_id)}else if(r.trayInfoIdx&&N?.length){let e=r.trayInfoIdx,t=N.find(t=>t.filament_id===e);t&&u(`builtin_${t.filament_id}`)}if(r.trayColor){let e=r.trayColor.slice(0,6);e&&h(e)}}else u(``),f(null),h(``),_(``),b(``),S(!1),T.current=``},[e,z?.slicer_filament,r.savedPresetId,r.trayInfoIdx,r.trayColor,D?.filament,N]),(0,y.useEffect)(()=>{if(se.length>0){if(z?.cali_idx!=null){let e=fW(se,z.cali_idx,z.extruder??r.extruderId);if(e){f(e);return}}if(r.caliIdx!=null&&r.caliIdx>0){let e=fW(se,r.caliIdx,r.extruderId);if(e){f(e);return}}f(se[0])}else f(null)},[l,se,z?.cali_idx,z?.extruder,r.caliIdx,r.extruderId]);let ue=(0,y.useCallback)(e=>{e.key===`Escape`&&t()},[t]);(0,y.useEffect)(()=>{if(e)return document.addEventListener(`keydown`,ue),()=>document.removeEventListener(`keydown`,ue)},[e,ue]);let de=O&&!k||M||P||I;if((0,y.useEffect)(()=>{if(!de&&l&&l!==T.current){let e=requestAnimationFrame(()=>{let e=document.querySelector(`[class*="fixed inset-0 z-50"]`)?.querySelector(`[data-preset-id="${CSS.escape(l)}"]`);e&&(T.current=l,e.scrollIntoView({block:`nearest`}))});return()=>cancelAnimationFrame(e)}},[l,de]),!e)return null;let fe=l&&!ee.isPending,pe=m||r.trayColor||`FFFFFF`;return(0,G.jsxs)(`div`,{className:`fixed inset-0 z-50 flex ${s?``:`items-center justify-center`}`,children:[!s&&(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60 backdrop-blur-sm`,onClick:t}),(0,G.jsxs)(`div`,{className:s?`relative w-full h-full bg-bambu-dark-secondary flex flex-col`:`relative w-full max-w-lg mx-4 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-2xl`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary shrink-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(tu,{className:`w-5 h-5 text-bambu-blue`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:c(`configureAmsSlot.title`)}),s&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 ml-4 text-sm text-bambu-gray`,children:[(0,G.jsx)(`span`,{className:`text-white/30`,children:`|`}),r.trayColor&&(0,G.jsx)(`span`,{className:`w-4 h-4 rounded-full border border-black/20`,style:kf(r.trayColor)}),(0,G.jsx)(`span`,{className:`text-white/70`,children:c(`configureAmsSlot.slotLabel`,{ams:gp(r.amsId,r.trayCount),slot:r.trayId+1})}),r.traySubBrands&&(0,G.jsxs)(`span`,{children:[`(`,r.traySubBrands,`)`]})]})]}),(0,G.jsx)(`button`,{onClick:t,className:`p-1 text-bambu-gray hover:text-white rounded transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 overflow-y-auto ${s?`flex-1 min-h-0`:`space-y-4 max-h-[60vh]`}`,children:[x&&(0,G.jsx)(`div`,{className:`absolute inset-0 bg-bambu-dark-secondary/95 z-10 flex items-center justify-center rounded-xl`,children:(0,G.jsxs)(`div`,{className:`text-center space-y-3`,children:[(0,G.jsx)(Ss,{className:`w-16 h-16 text-bambu-green mx-auto`}),(0,G.jsx)(`p`,{className:`text-lg font-semibold text-white`,children:c(`configureAmsSlot.slotConfigured`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:c(`configureAmsSlot.settingsSentToPrinter`)})]})}),!s&&(0,G.jsxs)(`div`,{className:`p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-1`,children:c(`configureAmsSlot.configuringSlot`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[r.trayColor&&(0,G.jsx)(`span`,{className:`w-4 h-4 rounded-full border border-black/20`,style:kf(r.trayColor)}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:c(`configureAmsSlot.slotLabel`,{ams:gp(r.amsId,r.trayCount),slot:r.trayId+1})}),r.traySubBrands&&(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[`(`,r.traySubBrands,`)`]})]})]}),de?(0,G.jsx)(`div`,{className:`flex justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})}):s?(0,G.jsxs)(`div`,{className:`flex gap-4 h-full`,children:[(0,G.jsxs)(`div`,{className:`w-1/2 flex flex-col min-h-0`,children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-2`,children:[c(`configureAmsSlot.filamentProfile`),` `,(0,G.jsx)(`span`,{className:`text-red-600 dark:text-red-400`,children:`*`})]}),(0,G.jsx)(`input`,{type:`text`,placeholder:c(`configureAmsSlot.searchPresets`),value:v,onChange:e=>b(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder:text-bambu-gray focus:border-bambu-green focus:outline-none mb-2 shrink-0`}),(0,G.jsx)(`div`,{className:`flex-1 min-h-0 overflow-y-auto space-y-1`,children:ne.length===0?(0,G.jsx)(`p`,{className:`text-center py-4 text-bambu-gray`,children:D?.filament?.length===0&&!j?.filament?.length?c(`configureAmsSlot.noPresetsAvailable`):c(`configureAmsSlot.noMatchingPresets`)}):ne.map(e=>(0,G.jsx)(`button`,{"data-preset-id":e.id,onClick:()=>u(e.id),className:`group w-full p-2 rounded-lg border text-left transition-colors ${l===e.id?`bg-bambu-green/20 border-bambu-green`:`bg-bambu-dark border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-white text-sm truncate group-hover:whitespace-normal group-hover:break-all`,title:e.name,children:e.name}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 flex-shrink-0`,children:[e.source===`local`&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-400`,children:c(`profiles.localProfiles.badge`)}),e.source===`orca_cloud`&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-400`,children:c(`configureAmsSlot.orcaCloud`)}),e.source===`cloud`&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-bambu-blue/20 text-bambu-blue`,children:c(`configureAmsSlot.bambuCloud`)}),e.source===`builtin`&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400`,children:c(`configureAmsSlot.builtin`)})]})]})},e.id))})]}),(0,G.jsxs)(`div`,{className:`w-1/2 flex flex-col gap-4 min-h-0 overflow-y-auto`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-2`,children:[c(`configureAmsSlot.kProfileLabel`),ie&&(0,G.jsx)(`span`,{className:`ml-2 text-xs text-bambu-blue`,children:c(`configureAmsSlot.filteringFor`,{material:ie})})]}),ce?(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:d?uW(d):``,onChange:e=>le(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none pr-10`,children:[(0,G.jsx)(`option`,{value:``,children:c(`configureAmsSlot.noKProfile`)}),se.map(e=>(0,G.jsxs)(`option`,{value:uW(e),children:[e.name,` (K=`,e.k_value,`)`,pW(e,oe,c)]},uW(e))),H.length>0&&(0,G.jsx)(`optgroup`,{label:c(`configureAmsSlot.otherKProfiles`),children:H.map(e=>(0,G.jsxs)(`option`,{value:uW(e),children:[e.name,` (K=`,e.k_value,`)`,pW(e,oe,c)]},uW(e)))})]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}):l?(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic py-2`,children:c(`configureAmsSlot.noMatchingKProfiles`)}):(0,G.jsx)(`span`,{className:`inline-block text-xs px-2 py-1 rounded bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400 border border-amber-300 dark:border-amber-500/30`,children:c(`configureAmsSlot.selectFilamentFirst`)}),d&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-green mt-1`,children:c(`configureAmsSlot.kFromCalibration`,{value:d.k_value})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-2`,children:c(`configureAmsSlot.customColorLabel`)}),ae.length>0&&(0,G.jsxs)(`div`,{className:`mb-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-1.5`,children:c(`configureAmsSlot.presetColors`,{name:re?.fullName})}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1.5`,children:ae.map(e=>(0,G.jsxs)(`button`,{onClick:()=>{h(e.hex_color.replace(`#`,``).toUpperCase()),_(e.color_name)},className:`h-7 px-2 rounded-md border-2 transition-all flex items-center gap-1.5 ${m===e.hex_color.replace(`#`,``).toUpperCase()?`border-bambu-green scale-105`:`border-white/20 hover:border-white/40`}`,title:e.color_name,children:[(0,G.jsx)(`span`,{className:`w-4 h-4 rounded-full border border-black/20 flex-shrink-0`,style:{backgroundColor:e.hex_color}}),(0,G.jsx)(`span`,{className:`text-xs text-white/80 whitespace-nowrap`,children:e.color_name})]},e.id))})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-1.5 mb-2`,children:[mW.map(e=>(0,G.jsx)(`button`,{onClick:()=>{h(e.hex),_(e.name)},className:`w-7 h-7 rounded-md border-2 transition-all ${m===e.hex?`border-bambu-green scale-110`:`border-white/20 hover:border-white/40`}`,style:{backgroundColor:`#${e.hex}`},title:e.name},e.hex)),(0,G.jsx)(`button`,{onClick:()=>w(!C),className:`w-7 h-7 rounded-md border-2 border-white/20 hover:border-white/40 flex items-center justify-center text-white/60 hover:text-white/80 transition-all text-xs`,title:c(C?`configureAmsSlot.showLessColors`:`configureAmsSlot.showMoreColors`),children:C?`−`:`+`})]}),C&&(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1.5 mb-2`,children:hW.map(e=>(0,G.jsx)(`button`,{onClick:()=>{h(e.hex),_(e.name)},className:`w-7 h-7 rounded-md border-2 transition-all ${m===e.hex?`border-bambu-green scale-110`:`border-white/20 hover:border-white/40`}`,style:{backgroundColor:`#${e.hex}`},title:e.name},e.hex))}),(0,G.jsxs)(`div`,{className:`flex gap-2 items-center`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-lg border-2 border-white/20 flex-shrink-0`,style:kf(pe)}),(0,G.jsx)(`input`,{type:`text`,placeholder:c(`configureAmsSlot.colorPlaceholder`),value:g,onChange:e=>{let t=e.target.value;_(t);let n=gW(t);if(n)h(n);else{let e=t.replace(/[^0-9A-Fa-f]/g,``).toUpperCase();e.length===6?h(e):e.length===3&&h(e.split(``).map(e=>e+e).join(``))}},className:`flex-1 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder:text-bambu-gray focus:border-bambu-green focus:outline-none text-sm`}),m&&(0,G.jsx)(`button`,{onClick:()=>{h(``),_(``)},className:`px-2 py-1 text-xs text-bambu-gray hover:text-white bg-bambu-dark-tertiary rounded`,title:c(`configureAmsSlot.clearCustomColor`),children:c(`configureAmsSlot.clear`)})]}),m&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1.5`,children:c(`configureAmsSlot.hexLabel`,{hex:m})})]})]})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-2`,children:[c(`configureAmsSlot.filamentProfile`),` `,(0,G.jsx)(`span`,{className:`text-red-600 dark:text-red-400`,children:`*`})]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`input`,{type:`text`,placeholder:c(`configureAmsSlot.searchPresets`),value:v,onChange:e=>b(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder:text-bambu-gray focus:border-bambu-green focus:outline-none mb-2`}),(0,G.jsx)(`div`,{className:`max-h-48 overflow-y-auto space-y-1`,children:ne.length===0?(0,G.jsx)(`p`,{className:`text-center py-4 text-bambu-gray`,children:D?.filament?.length===0&&!j?.filament?.length?c(`configureAmsSlot.noPresetsAvailable`):c(`configureAmsSlot.noMatchingPresets`)}):ne.map(e=>(0,G.jsx)(`button`,{"data-preset-id":e.id,onClick:()=>u(e.id),className:`group w-full p-2 rounded-lg border text-left transition-colors ${l===e.id?`bg-bambu-green/20 border-bambu-green`:`bg-bambu-dark border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-white text-sm truncate group-hover:whitespace-normal group-hover:break-all`,title:e.name,children:e.name}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 flex-shrink-0`,children:[e.source===`local`&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-400`,children:c(`profiles.localProfiles.badge`)}),e.source===`orca_cloud`&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-400`,children:c(`configureAmsSlot.orcaCloud`)}),e.source===`cloud`&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-bambu-blue/20 text-bambu-blue`,children:c(`configureAmsSlot.bambuCloud`)}),e.source===`builtin`&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400`,children:c(`configureAmsSlot.builtin`)})]})]})},e.id))})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-2`,children:[c(`configureAmsSlot.kProfileLabel`),ie&&(0,G.jsx)(`span`,{className:`ml-2 text-xs text-bambu-blue`,children:c(`configureAmsSlot.filteringFor`,{material:ie})})]}),ce?(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:d?uW(d):``,onChange:e=>le(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none pr-10`,children:[(0,G.jsx)(`option`,{value:``,children:c(`configureAmsSlot.noKProfile`)}),se.map(e=>(0,G.jsxs)(`option`,{value:uW(e),children:[e.name,` (K=`,e.k_value,`)`,pW(e,oe,c)]},uW(e))),H.length>0&&(0,G.jsx)(`optgroup`,{label:c(`configureAmsSlot.otherKProfiles`),children:H.map(e=>(0,G.jsxs)(`option`,{value:uW(e),children:[e.name,` (K=`,e.k_value,`)`,pW(e,oe,c)]},uW(e)))})]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}):l?(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic py-2`,children:c(`configureAmsSlot.noMatchingKProfiles`)}):(0,G.jsx)(`span`,{className:`inline-block text-xs px-2 py-1 rounded bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400 border border-amber-300 dark:border-amber-500/30`,children:c(`configureAmsSlot.selectFilamentFirst`)}),d&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-green mt-1`,children:c(`configureAmsSlot.kFromCalibration`,{value:d.k_value})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-2`,children:c(`configureAmsSlot.customColorLabel`)}),ae.length>0&&(0,G.jsxs)(`div`,{className:`mb-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-1.5`,children:c(`configureAmsSlot.presetColors`,{name:re?.fullName})}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1.5`,children:ae.map(e=>(0,G.jsxs)(`button`,{onClick:()=>{h(e.hex_color.replace(`#`,``).toUpperCase()),_(e.color_name)},className:`h-7 px-2 rounded-md border-2 transition-all flex items-center gap-1.5 ${m===e.hex_color.replace(`#`,``).toUpperCase()?`border-bambu-green scale-105`:`border-white/20 hover:border-white/40`}`,title:e.color_name,children:[(0,G.jsx)(`span`,{className:`w-4 h-4 rounded-full border border-black/20 flex-shrink-0`,style:{backgroundColor:e.hex_color}}),(0,G.jsx)(`span`,{className:`text-xs text-white/80 whitespace-nowrap`,children:e.color_name})]},e.id))})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-1.5 mb-2`,children:[mW.map(e=>(0,G.jsx)(`button`,{onClick:()=>{h(e.hex),_(e.name)},className:`w-7 h-7 rounded-md border-2 transition-all ${m===e.hex?`border-bambu-green scale-110`:`border-white/20 hover:border-white/40`}`,style:{backgroundColor:`#${e.hex}`},title:e.name},e.hex)),(0,G.jsx)(`button`,{onClick:()=>w(!C),className:`w-7 h-7 rounded-md border-2 border-white/20 hover:border-white/40 flex items-center justify-center text-white/60 hover:text-white/80 transition-all text-xs`,title:c(C?`configureAmsSlot.showLessColors`:`configureAmsSlot.showMoreColors`),children:C?`−`:`+`})]}),C&&(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1.5 mb-2`,children:hW.map(e=>(0,G.jsx)(`button`,{onClick:()=>{h(e.hex),_(e.name)},className:`w-7 h-7 rounded-md border-2 transition-all ${m===e.hex?`border-bambu-green scale-110`:`border-white/20 hover:border-white/40`}`,style:{backgroundColor:`#${e.hex}`},title:e.name},e.hex))}),(0,G.jsxs)(`div`,{className:`flex gap-2 items-center`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-lg border-2 border-white/20 flex-shrink-0`,style:kf(pe)}),(0,G.jsx)(`input`,{type:`text`,placeholder:c(`configureAmsSlot.colorPlaceholder`),value:g,onChange:e=>{let t=e.target.value;_(t);let n=gW(t);if(n)h(n);else{let e=t.replace(/[^0-9A-Fa-f]/g,``).toUpperCase();e.length===6?h(e):e.length===3&&h(e.split(``).map(e=>e+e).join(``))}},className:`flex-1 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder:text-bambu-gray focus:border-bambu-green focus:outline-none text-sm`}),m&&(0,G.jsx)(`button`,{onClick:()=>{h(``),_(``)},className:`px-2 py-1 text-xs text-bambu-gray hover:text-white bg-bambu-dark-tertiary rounded`,title:c(`configureAmsSlot.clearCustomColor`),children:c(`configureAmsSlot.clear`)})]}),m&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1.5`,children:c(`configureAmsSlot.hexLabel`,{hex:m})})]})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-between p-4 border-t border-bambu-dark-tertiary shrink-0`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>te.mutate(),disabled:te.isPending||ee.isPending,className:`text-red-600 dark:text-red-400 hover:text-red-700 dark:hover:text-red-300 hover:bg-red-50 dark:hover:bg-red-500/10`,children:te.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),c(`configureAmsSlot.resetting`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ul,{className:`w-4 h-4`}),c(`configureAmsSlot.resetSlot`)]})}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:t,children:c(`configureAmsSlot.cancel`)}),(0,G.jsx)(Q,{onClick:()=>ee.mutate(),disabled:!fe,children:ee.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),c(`configureAmsSlot.configuring`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(tu,{className:`w-4 h-4`}),c(`configureAmsSlot.configureSlot`)]})})]})]}),(ee.isError||te.isError)&&(0,G.jsx)(`div`,{className:`mx-4 mb-4 p-2 bg-red-100 dark:bg-red-500/20 border border-red-300 dark:border-red-500/50 rounded text-sm text-red-700 dark:text-red-400`,children:ee.error?.message||te.error?.message})]})]})}function vW({className:e=`w-4 h-4`}){return(0,G.jsx)(`svg`,{viewBox:`0 0 1945 1370`,fill:`none`,className:e,"aria-hidden":`true`,children:(0,G.jsxs)(`g`,{transform:`translate(-754.293 -471.685)`,children:[(0,G.jsxs)(`g`,{transform:`translate(0.18191 255.976)`,children:[(0,G.jsx)(`g`,{transform:`matrix(1.05469 0 0 0.241063 -153.484 1120.2)`,children:(0,G.jsx)(`rect`,{x:`922.048`,y:`1195.15`,width:`1721.5`,height:`470.135`,stroke:`currentColor`,strokeOpacity:`0.99`,strokeWidth:`168.84`,strokeLinecap:`round`,strokeLinejoin:`round`})}),(0,G.jsx)(`g`,{transform:`matrix(0.983656 0 0 1.0767 -62.2035 141.539)`,children:(0,G.jsx)(`path`,{d:`M2741.42,1175.93L895.832,1175.93L1125.16,621.902L2512.09,621.902L2741.42,1175.93Z`,fill:`currentColor`,fillOpacity:`0.05`,stroke:`currentColor`,strokeOpacity:`0.99`,strokeWidth:`125.26`,strokeLinecap:`round`,strokeLinejoin:`round`})})]}),(0,G.jsx)(`g`,{transform:`translate(21.1916 0.684817)`,children:(0,G.jsx)(`path`,{d:`M1981.31,567.518C1954.86,567.518 1933.39,546.047 1933.39,519.601C1933.39,493.156 1954.86,471.685 1981.31,471.685L2146.61,471.685C2173.07,471.685 2194.53,493.138 2194.53,519.601L2194.53,688.741C2194.53,715.187 2173.05,736.658 2146.61,736.658C2120.16,736.658 2098.69,715.187 2098.69,688.741L2098.69,567.518L1981.31,567.518ZM2098.69,1252.54C2098.69,1226.1 2120.16,1204.62 2146.61,1204.62C2173.05,1204.62 2194.53,1226.1 2194.53,1252.54L2194.53,1421.68C2194.53,1448.14 2173.07,1469.6 2146.61,1469.6L1981.31,1469.6C1954.86,1469.6 1933.39,1448.13 1933.39,1421.68C1933.39,1395.24 1954.86,1373.76 1981.31,1373.76L2098.69,1373.76L2098.69,1252.54ZM1430.29,1373.76C1456.74,1373.76 1478.21,1395.24 1478.21,1421.68C1478.21,1448.13 1456.74,1469.6 1430.29,1469.6L1264.99,1469.6C1238.53,1469.6 1217.07,1448.14 1217.07,1421.68L1217.07,1252.54C1217.07,1226.1 1238.55,1204.62 1264.99,1204.62C1291.44,1204.62 1312.91,1226.1 1312.91,1252.54L1312.91,1373.76L1430.29,1373.76ZM1312.91,688.741C1312.91,715.187 1291.44,736.658 1264.99,736.658C1238.55,736.658 1217.07,715.187 1217.07,688.741L1217.07,519.601C1217.07,493.138 1238.53,471.685 1264.99,471.685L1430.29,471.685C1456.74,471.685 1478.21,493.156 1478.21,519.601C1478.21,546.047 1456.74,567.518 1430.29,567.518L1312.91,567.518L1312.91,688.741Z`,fill:`currentColor`,fillOpacity:`0.99`})})]})})}function yW({folderId:e,onClose:t,onUploadComplete:n,onFileUploaded:r,autoUpload:i,validateFile:a,accept:o,initialFiles:s}){let{t:c}=U(),[l,u]=(0,y.useState)([]),[d,f]=(0,y.useState)(!1),[p,m]=(0,y.useState)(!1),[h,g]=(0,y.useState)(!0),[_,v]=(0,y.useState)(!1),[b,x]=(0,y.useState)(!0),[S,C]=(0,y.useState)(null),w=(0,y.useRef)(null),T=e=>{e.preventDefault(),f(!0)},E=e=>{e.preventDefault(),f(!1)},D=e=>{e.preventDefault(),f(!1),j(Array.from(e.dataTransfer.files))},O=e=>{e.target.files&&j(Array.from(e.target.files))},k=(e,t)=>{u(n=>n.map(n=>n.file===e?{...n,...t}:n))},A=async i=>{m(!0);for(let t of i)if(t.status===`pending`){k(t.file,{status:`uploading`});try{if(t.isZip){let n=await Z.extractZipFile(t.file,e,h,_,b);k(t.file,{status:n.errors.length>0&&n.extracted===0?`error`:`success`,extractedCount:n.extracted,error:n.errors.length>0?c(`fileManager.zipFilesFailed`,`{{count}} files failed`,{count:n.errors.length}):void 0})}else{let n=await Z.uploadLibraryFile(t.file,e,b);k(t.file,{status:`success`});let i=r?.(n);if(i){C(i),u([]),m(!1);return}}}catch(e){k(t.file,{status:`error`,error:e instanceof Error?e.message:c(`fileManager.uploadFailed`,`Upload failed`)})}}m(!1),n(),u(e=>(e.some(e=>e.status===`error`)||t(),e))},j=e=>{if(C(null),a)for(let t of e){let e=a(t);if(e){C(e);return}}let t=e.map(e=>({file:e,status:`pending`,isZip:e.name.toLowerCase().endsWith(`.zip`),is3mf:e.name.toLowerCase().endsWith(`.3mf`)}));u(e=>[...e,...t]),i&&e.length>0&&A(t)},M=e=>{u(t=>t.filter((t,n)=>n!==e))},N=(0,y.useRef)(!1);(0,y.useEffect)(()=>{N.current||!s||s.length===0||(N.current=!0,j(s))},[]);let P=l.some(e=>e.isZip&&e.status===`pending`),F=l.some(e=>e.file.name.toLowerCase().endsWith(`.stl`)&&e.status===`pending`),I=l.some(e=>e.is3mf&&e.status===`pending`),L=l.filter(e=>e.status===`pending`).length,R=l.length>0&&L===0&&!p;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg w-full max-w-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary flex items-center justify-between`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:c(`fileManager.uploadFiles`)}),(0,G.jsx)(`button`,{onClick:t,className:`p-1 hover:bg-bambu-dark rounded`,children:(0,G.jsx)(td,{className:`w-5 h-5 text-bambu-gray`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-4`,children:[(0,G.jsxs)(`div`,{onDragOver:T,onDragLeave:E,onDrop:D,onClick:()=>w.current?.click(),className:`border-2 border-dashed rounded-lg p-8 text-center cursor-pointer transition-colors ${d?`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary hover:border-bambu-green/50`}`,children:[(0,G.jsx)(Bu,{className:`w-10 h-10 mx-auto mb-3 ${d?`text-bambu-green`:`text-bambu-gray`}`}),(0,G.jsx)(`p`,{className:`text-white font-medium`,children:c(d?`fileManager.dropFilesHere`:`fileManager.dragDropFiles`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:c(`fileManager.orClickToBrowse`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/70 mt-2`,children:c(`fileManager.allFileTypesSupported`)})]}),(0,G.jsx)(`input`,{ref:w,type:`file`,multiple:!0,accept:o,className:`hidden`,onChange:O}),P&&(0,G.jsx)(`div`,{className:`p-3 bg-blue-50 dark:bg-blue-500/10 border border-blue-300 dark:border-blue-500/30 rounded-lg`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(Po,{className:`w-5 h-5 text-blue-600 dark:text-blue-400 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`p`,{className:`text-sm text-blue-700 dark:text-blue-300 font-medium`,children:c(`fileManager.zipFilesDetected`)}),(0,G.jsx)(`p`,{className:`text-xs text-blue-700/80 dark:text-blue-300/70 mt-1`,children:c(`fileManager.zipExtractOptions`)}),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 mt-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:h,onChange:e=>g(e.target.checked),className:`w-4 h-4 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:c(`fileManager.preserveZipStructure`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 mt-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:_,onChange:e=>v(e.target.checked),className:`w-4 h-4 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:c(`fileManager.createFolderFromZip`)})]})]})]})}),I&&(0,G.jsx)(`div`,{className:`p-3 bg-purple-50 dark:bg-purple-500/10 border border-purple-300 dark:border-purple-500/30 rounded-lg`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(Ll,{className:`w-5 h-5 text-purple-600 dark:text-purple-400 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`p`,{className:`text-sm text-purple-700 dark:text-purple-300 font-medium`,children:c(`fileManager.threemfDetected`)}),(0,G.jsx)(`p`,{className:`text-xs text-purple-700/80 dark:text-purple-300/70 mt-1`,children:c(`fileManager.threemfExtractionInfo`)})]})]})}),(F||P)&&(0,G.jsx)(`div`,{className:`p-3 bg-bambu-green/10 border border-bambu-green/30 rounded-lg`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(Vc,{className:`w-5 h-5 text-bambu-green mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-green font-medium`,children:c(`fileManager.stlThumbnailGeneration`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-green/70 mt-1`,children:c(P&&!F?`fileManager.zipMayContainStl`:`fileManager.thumbnailsCanBeGenerated`)}),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 mt-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:b,onChange:e=>x(e.target.checked),className:`w-4 h-4 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:c(`fileManager.generateThumbnailsForStl`)})]})]})]})}),l.length>0&&(0,G.jsx)(`div`,{className:`max-h-48 overflow-y-auto space-y-2`,children:l.map((e,t)=>(0,G.jsxs)(`div`,{className:`flex items-center gap-3 p-2 bg-bambu-dark rounded-lg`,children:[e.isZip?(0,G.jsx)(Po,{className:`w-4 h-4 text-blue-600 dark:text-blue-400 flex-shrink-0`}):(0,G.jsx)(fc,{className:`w-4 h-4 text-bambu-gray flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white truncate`,children:e.file.name}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[(e.file.size/1024/1024).toFixed(2),` MB`,e.isZip&&e.status===`pending`&&(0,G.jsxs)(`span`,{className:`text-blue-700 dark:text-blue-400 ml-2`,children:[`• `,c(`fileManager.willBeExtracted`)]}),e.extractedCount!==void 0&&(0,G.jsxs)(`span`,{className:`text-green-700 dark:text-green-400 ml-2`,children:[`• `,c(`fileManager.filesExtracted`,{count:e.extractedCount})]})]}),e.status===`error`&&e.error&&(0,G.jsx)(`p`,{className:`text-xs text-red-700 dark:text-red-400 mt-1 break-words`,children:e.error})]}),e.status===`pending`&&(0,G.jsx)(`button`,{onClick:()=>M(t),className:`p-1 hover:bg-bambu-dark-tertiary rounded`,children:(0,G.jsx)(td,{className:`w-4 h-4 text-bambu-gray`})}),e.status===`uploading`&&(0,G.jsx)(Y,{className:`w-4 h-4 text-bambu-green animate-spin`}),e.status===`success`&&(0,G.jsx)(xs,{className:`w-4 h-4 text-green-500`}),e.status===`error`&&(0,G.jsx)(`span`,{title:e.error,children:(0,G.jsx)(Ds,{className:`w-4 h-4 text-red-500`})})]},t))}),S&&(0,G.jsx)(`div`,{className:`p-3 bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 rounded-lg`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(Ds,{className:`w-5 h-5 text-red-600 dark:text-red-400 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`p`,{className:`text-sm text-red-700 dark:text-red-300`,children:S})]})})]}),(0,G.jsxs)(`div`,{className:`p-4 border-t border-bambu-dark-tertiary flex justify-end gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:t,children:c(`common.cancel`)}),!R&&(0,G.jsx)(Q,{onClick:()=>A(l),disabled:L===0||p,children:p?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 mr-2 animate-spin`}),c(`fileManager.uploading`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Bu,{className:`w-4 h-4 mr-2`}),c(`common.upload`),` `,L>0?`(${L})`:``]})})]})]})})}function bW(e){if(!e)return null;let t=[e.brand,e.material,e.subtype].filter(Boolean);return t.length>0?t.join(` `):null}function xW(e,t){let n=[],r=e?.ams_extruder_map,i=!!e?.nozzles?.[1]?.nozzle_diameter||r&&Object.keys(r).length>0||(e?.vt_tray?.length??0)>1;e?.ams?.forEach(e=>{let i=e.tray.length===1;e.tray.forEach(a=>{if(a.tray_type){let o=dp(a.tray_color),s=kp(e.id,a.id,!1),c=t?.get(s);n.push({type:a.tray_type,color:o,colorName:c?.color_name?.trim()||Tf(o,a.tray_sub_brands),amsId:e.id,trayId:a.id,isHt:i,isExternal:!1,label:Op(e.id,a.id,i,!1),globalTrayId:s,trayInfoIdx:a.tray_info_idx||``,traySubBrands:a.tray_sub_brands||``,spoolName:bW(c)??void 0,extraColors:c?.extra_colors??void 0,effectType:c?.effect_type??void 0,spoolSubtype:c?.subtype??void 0,extruderId:r?.[String(e.id)],remain:a.remain??-1})}})});for(let r of e?.vt_tray??[])if(r.tray_type){let a=dp(r.tray_color),o=r.id??254,s=(e?.vt_tray?.length??0)>1,c=t?.get(o);n.push({type:r.tray_type,color:a,colorName:c?.color_name?.trim()||Tf(a,r.tray_sub_brands),amsId:-1,trayId:o-254,isHt:!1,isExternal:!0,label:s?o===254?`Ext-L`:`Ext-R`:`External`,globalTrayId:o,trayInfoIdx:r.tray_info_idx||``,traySubBrands:r.tray_sub_brands||``,spoolName:bW(c)??void 0,extraColors:c?.extra_colors??void 0,effectType:c?.effect_type??void 0,spoolSubtype:c?.subtype??void 0,extruderId:i?255-o:void 0,remain:r.remain??-1})}return n}function SW(e,t,n,r){let i=xW(t);if(i.length!==0)return TW(wW(e,i,{},n,r,t?.fila_switch?.installed===!0))}function COe(e,t){return(0,y.useMemo)(()=>xW(e,t),[e,t])}function CW(e,t){let n=fp(t);return n?fp(e)===n||xp(e,t):!0}function wW(e,t,n,r,i,a=!1){if(!e?.filaments||e.filaments.length===0)return[];let o=new Set(Object.values(n));return e.filaments.map(e=>{let s=e.slot_id||0;if(s>0&&n[s]!==void 0){let r=n[s],i=t.find(e=>e.globalTrayId===r);if(i){let t=bp(i.type,e.type),n=CW(i.color,e.color),r;return r=t&&n?`match`:t?`type_only`:`mismatch`,{...e,loaded:i,hasFilament:!0,typeMatch:t,colorMatch:n,status:r,isManual:!0}}}let c=e.tray_info_idx||``,l=t.filter(e=>!o.has(e.globalTrayId));e.nozzle_id!=null&&!a&&(l=l.filter(t=>t.extruderId===e.nozzle_id)),r&&(l=[...l].sort((e,t)=>Rp(Lp(e,i),Lp(t,i))));let u,d,f,p;if(c){let t=l.filter(e=>e.trayInfoIdx===c);t.length===1?u=t[0]:t.length>1&&(r&&t.sort((e,t)=>Rp(Lp(e,i),Lp(t,i))),d=t.find(t=>bp(t.type,e.type)&&fp(t.color)===fp(e.color)),d||(f=Dp(t.filter(t=>bp(t.type,e.type)),e.color,e=>e.color)),!d&&!f&&(p=t.find(t=>bp(t.type,e.type))))}!u&&!d&&!f&&!p&&(d=l.find(t=>bp(t.type,e.type)&&fp(t.color)===fp(e.color)),d||(f=Dp(l.filter(t=>bp(t.type,e.type)),e.color,e=>e.color)),!d&&!f&&(p=l.find(t=>bp(t.type,e.type))));let m=u||d||f||p||void 0;m&&o.add(m.globalTrayId);let h=!!m,g=h,_=h&&CW(m.color,e.color),v;return v=h?_?`match`:`type_only`:`mismatch`,{...e,loaded:m,hasFilament:h,typeMatch:g,colorMatch:_,status:v,isManual:!1}})}function TW(e){if(e.length===0)return;let t=Math.max(...e.map(e=>e.slot_id||0));if(t<=0)return;let n=Array(t).fill(-1);return e.forEach(e=>{e.slot_id&&e.slot_id>0&&(n[e.slot_id-1]=e.loaded?.globalTrayId??-1)}),n}function EW(e,t,n,r,i,a){let o=COe(t,a),s=t?.fila_switch?.installed===!0,c=(0,y.useMemo)(()=>wW(e,o,n,r,i,s),[e,o,n,r,s,i]);return{loadedFilaments:o,filamentComparison:c,amsMapping:(0,y.useMemo)(()=>o.length===0?void 0:TW(c),[c,o.length]),hasTypeMismatch:c.some(e=>e.status===`mismatch`),hasColorMismatch:c.some(e=>e.status===`type_only`)}}function wOe(e,t,n,r,i){if(!e||e.length===0)return{exactMatches:0,typeOnlyMatches:0,missingTypes:0,totalSlots:0,status:`full`};let a=0,o=0,s=0,c=new Set(Object.values(n));for(let l of e){let e=l.slot_id||0;if(e>0&&n[e]!==void 0){let r=n[e],i=t.find(e=>e.globalTrayId===r);if(i){let e=bp(i.type,l.type),t=fp(i.color)===fp(l.color)||xp(i.color,l.color);e&&t?a++:e?o++:s++;continue}}let u=t.filter(e=>!c.has(e.globalTrayId));if(l.nozzle_id!=null){let e=u.filter(e=>e.extruderId===l.nozzle_id);e.length>0&&(u=e)}r&&(u=[...u].sort((e,t)=>Rp(Lp(e,i),Lp(t,i))));let d=u.find(e=>bp(e.type,l.type)&&fp(e.color)===fp(l.color)),f=d?void 0:Dp(u.filter(e=>bp(e.type,l.type)),l.color,e=>e.color),p=d||f?void 0:u.find(e=>bp(e.type,l.type)),m=d??f??p;m&&c.add(m.globalTrayId),d||f?a++:p?o++:s++}let l=e.length,u=`full`;return s>0?u=`missing`:o>0&&(u=`partial`),{exactMatches:a,typeOnlyMatches:o,missingTypes:s,totalSlots:l,status:u}}function TOe(e,t,n,r,i){if(!e?.filaments||e.filaments.length===0)return;let a=xW(t);if(a.length===0)return;let o=new Set(Object.values(n)),s=[];for(let t of e.filaments){let e=t.slot_id||0;if(e>0&&n[e]!==void 0){s.push({slot_id:e,globalTrayId:n[e]});continue}let c=a.filter(e=>!o.has(e.globalTrayId));if(t.nozzle_id!=null){let e=c.filter(e=>e.extruderId===t.nozzle_id);e.length>0&&(c=e)}r&&(c=[...c].sort((e,t)=>Rp(Lp(e,i),Lp(t,i))));let l=c.find(e=>bp(e.type,t.type)&&fp(e.color)===fp(t.color)),u=l?void 0:Dp(c.filter(e=>bp(e.type,t.type)),t.color,e=>e.color),d=l||u?void 0:c.find(e=>bp(e.type,t.type)),f=l??u??d;f&&o.add(f.globalTrayId),s.push({slot_id:e,globalTrayId:f?.globalTrayId??-1})}let c=Math.max(...s.map(e=>e.slot_id||0));if(c<=0)return;let l=Array(c).fill(-1);return s.forEach(e=>{e.slot_id&&e.slot_id>0&&(l[e.slot_id-1]=e.globalTrayId)}),l}var DW={useDefault:!0,manualMappings:{},autoConfigured:!1};function EOe(e,t,n,r,i,a,o,s){let c=Co({queries:e.map(t=>({queryKey:[`printer-status`,t],queryFn:()=>Z.getPrinterStatus(t),enabled:e.length>0,staleTime:5e3}))}),l=(0,y.useMemo)(()=>e.map((e,a)=>{let l=c[a],u=l?.data,d=t?.find(t=>t.id===e)?.name||`Printer ${e}`,f=xW(u),p=i[e]||DW,m=s?.get(e),h=zp(o,u?.ams_filament_backup),g=SW(n,u,h,m),_=p.useDefault?r:p.manualMappings,v=TOe(n,u,_,h,m),y=wOe(n?.filaments,f,_,h,m);return{printerId:e,printerName:d,status:u,isLoading:l?.isLoading??!1,loadedFilaments:f,autoMapping:g,finalMapping:v,matchStatus:y.status,exactMatches:y.exactMatches,typeOnlyMatches:y.typeOnlyMatches,missingTypes:y.missingTypes,totalSlots:y.totalSlots,config:p,inventoryByTrayId:m}}),[e,c,t,n,i,r,o,s]),u=c.some(e=>e.isLoading),d=(e,t)=>{a(n=>({...n,[e]:{...n[e]||DW,...t}}))},f=e=>{let t=l.find(t=>t.printerId===e);if(!t||!t.status||!n?.filaments)return;let r=SW(n,t.status,zp(o,t.status?.ams_filament_backup),s?.get(e));if(!r)return;let i={};r.forEach((e,t)=>{e!==-1&&(i[t+1]=e)}),d(e,{useDefault:!1,manualMappings:i,autoConfigured:!0})};return{printerResults:l,isLoading:u,perPrinterConfigs:i,updatePrinterConfig:d,autoConfigureAll:()=>{for(let t of e)f(t)},autoConfigurePrinter:f,getFinalMapping:e=>l.find(t=>t.printerId===e)?.finalMapping,allPrintersReady:l.every(e=>e.matchStatus!==`missing`)}}var OW=`/img/bed`,DOe={"cool plate":{icon:`${OW}/bed_cool.png`,label:`Cool Plate`},"pc plate":{icon:`${OW}/bed_cool.png`,label:`Cool Plate`},"cool plate (supertack)":{icon:`${OW}/bed_cool_supertack.png`,label:`Cool Plate SuperTack`},"supertack plate":{icon:`${OW}/bed_cool_supertack.png`,label:`Cool Plate SuperTack`},"bambu cool plate supertack":{icon:`${OW}/bed_cool_supertack.png`,label:`Cool Plate SuperTack`},"engineering plate":{icon:`${OW}/bed_engineering.png`,label:`Engineering Plate`},"high temp plate":{icon:`${OW}/bed_high_templ.png`,label:`High Temp Plate`},"textured pei plate":{icon:`${OW}/bed_pei.png`,label:`Textured PEI Plate`},"pei plate":{icon:`${OW}/bed_pei.png`,label:`PEI Plate`},"smooth pei plate":{icon:`${OW}/bed_pei_cool.png`,label:`Smooth PEI Plate`}};function kW(e){return e?DOe[e.trim().toLowerCase()]??null:null}function OOe(e,t){if(t==null)return;let n=e?.slicer_ams_mapping;if(!(!n||typeof n!=`object`)&&n.printer_id===t&&!(!Array.isArray(n.mapping)||n.mapping.length===0))return n.mapping}function AW({rgba:e,extraColors:t,effectType:n,subtype:r,className:i=`w-5 h-5`,shape:a=`circle`,style:o,title:s,effectSize:c}){let l=(0,y.useMemo)(()=>SU(t),[t]),u=(0,y.useMemo)(()=>CU({effectSize:c,rgba:e,extraColors:t,effectType:n,subtype:r}),[c,e,t,n,r]),d=u.backgroundImage,f=u.backgroundSize,p=a===`circle`||a===`pill`?`rounded-full`:`rounded`,m=(()=>{if(!e)return;let t=e.replace(/^#/,``);return t.length>=8&&t.substring(6,8).toLowerCase()!==`ff`?`#${t.substring(0,8)}`:`#${t.substring(0,6)}`})(),h=s??(l.length>0?l.join(`, `):m);return(0,G.jsx)(`span`,{"data-testid":`filament-swatch`,className:`${i} ${p} border border-black/20 inline-block flex-shrink-0`,style:{backgroundImage:d,backgroundSize:f,...o},title:h})}var kOe=`w-3 h-3`;function jW({value:e,options:t,placeholder:n,placeholderOption:r,onChange:i,disabled:a=!1,ariaLabel:o,title:s,className:c=``,exactMatchLabel:l}){let[u,d]=(0,y.useState)(!1),[f,p]=(0,y.useState)(0),[m,h]=(0,y.useState)(null),g=(0,y.useRef)(null),_=(0,y.useRef)(null),v=[{...r??{},value:``,label:n},...t],b=Math.max(0,v.findIndex(t=>t.value===e)),x=v[b],S=(0,y.useCallback)(()=>{let e=g.current;if(!e)return;let t=e.getBoundingClientRect(),n=window.innerHeight-t.bottom,r=Math.min(_.current?.scrollHeight??0,240);h({top:n<r+8&&t.top>n?Math.max(8,t.top-r-4):t.bottom+4,left:t.left,width:t.width})},[]);(0,y.useLayoutEffect)(()=>{u&&S()},[u,S]),(0,y.useEffect)(()=>{if(!u)return;let e=e=>{let t=e.target;g.current?.contains(t)||_.current?.contains(t)||d(!1)},t=e=>{e.key===`Escape`&&(e.stopPropagation(),d(!1),g.current?.focus())},n=()=>S();return document.addEventListener(`mousedown`,e),document.addEventListener(`keydown`,t,!0),window.addEventListener(`scroll`,n,!0),window.addEventListener(`resize`,n),()=>{document.removeEventListener(`mousedown`,e),document.removeEventListener(`keydown`,t,!0),window.removeEventListener(`scroll`,n,!0),window.removeEventListener(`resize`,n)}},[u,S]);let C=e=>{i(v[e].value),d(!1),g.current?.focus()},w=e=>{p(e),d(!0)},T=e=>{if(!a){if(!u){(e.key===`ArrowDown`||e.key===`ArrowUp`||e.key===`Enter`||e.key===` `)&&(e.preventDefault(),w(b));return}e.key===`ArrowDown`?(e.preventDefault(),p(e=>Math.min(v.length-1,e+1))):e.key===`ArrowUp`?(e.preventDefault(),p(e=>Math.max(0,e-1))):e.key===`Home`?(e.preventDefault(),p(0)):e.key===`End`?(e.preventDefault(),p(v.length-1)):e.key===`Enter`||e.key===` `?(e.preventDefault(),C(f)):e.key===`Tab`&&d(!1)}},E=`slot-picker-${o.replace(/\W+/g,`-`)}`,D=e=>e.rgba?(0,G.jsx)(AW,{rgba:e.rgba,extraColors:e.extraColors,effectType:e.effectType,subtype:e.subtype,className:kOe,effectSize:`table`}):null;return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`button`,{ref:g,type:`button`,role:`combobox`,"aria-label":o,"aria-haspopup":`listbox`,"aria-expanded":u,"aria-controls":u?E:void 0,"aria-activedescendant":u?`${E}-${f}`:void 0,disabled:a,title:s,onClick:()=>u?d(!1):w(b),onKeyDown:T,className:`flex-1 min-w-0 flex items-center gap-1.5 px-2 py-1 rounded border text-xs bg-bambu-dark-secondary text-left focus:outline-none focus:ring-1 focus:ring-bambu-green disabled:opacity-50 ${c}`,children:[D(x),(0,G.jsxs)(`span`,{className:`flex-1 min-w-0 truncate`,children:[x.label,x.meta?(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:x.meta}):null]}),(0,G.jsx)(ps,{className:`w-3 h-3 shrink-0 opacity-70`})]}),u&&(0,At.createPortal)((0,G.jsx)(`div`,{ref:_,id:E,role:`listbox`,"aria-label":o,className:`fixed z-[60] max-h-60 overflow-y-auto rounded-lg border border-bambu-dark-tertiary bg-bambu-dark-secondary p-1 shadow-xl`,style:{top:m?.top??-9999,left:m?.left??-9999,width:m?.width,visibility:m?`visible`:`hidden`},children:v.map((e,t)=>(0,G.jsxs)(`button`,{id:`${E}-${t}`,type:`button`,role:`option`,"data-value":e.value,"aria-selected":t===b,onMouseEnter:()=>p(t),onClick:()=>C(t),className:`w-full flex items-center gap-1.5 text-left px-2 py-1.5 rounded-md text-xs ${t===b?`bg-bambu-green/15 text-bambu-green`:t===f?`bg-bambu-dark text-white`:`text-white`}`,children:[D(e),(0,G.jsxs)(`span`,{className:`flex-1 min-w-0 truncate`,title:e.label,children:[e.label,e.meta?(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:e.meta}):null]}),e.hex?(0,G.jsx)(`span`,{className:`shrink-0 font-mono text-[10px] uppercase text-bambu-gray`,children:e.hex}):null,e.exactMatch?(0,G.jsx)(`span`,{title:l,className:`shrink-0 text-bambu-green`,children:(0,G.jsx)(fs,{className:`w-3 h-3`})}):null]},e.key??`${e.value}-${t}`))}),document.body)]})}function MW(e){if(!e)return null;let t=e.trim().replace(/^#/,``);return/^[0-9a-fA-F]{6}([0-9a-fA-F]{2})?$/.test(t)?`#${(t.length===8&&t.substring(6,8).toLowerCase()!==`ff`?t:t.substring(0,6)).toUpperCase()}`:null}function AOe(e){let t=e.trim().split(/\s+/);return t.length<=1?e.trim():t.slice(1).join(` `)}function NW(e){let{data:t}=K({queryKey:[`builtin-filaments`],queryFn:()=>Z.getBuiltinFilaments(),staleTime:300*1e3}),{data:n}=K({queryKey:[`filament-id-map`],queryFn:()=>Z.getFilamentIdMap(),staleTime:300*1e3}),r=(0,y.useMemo)(()=>{let e={};for(let n of t||[])n.filament_id&&(e[n.filament_id]=n.name);for(let[t,r]of Object.entries(n||{}))t&&r&&(e[t]=r);return e},[t,n]),i=(0,y.useMemo)(()=>(e||[]).map(e=>{let t=e.tray_info_idx&&r[e.tray_info_idx]||e.type;return{resolvedName:t,materialHint:AOe(t),color:e.color}}),[e,r]),a=Co({queries:i.map(({color:e,materialHint:t})=>({queryKey:[`color-by-material`,e,t],queryFn:()=>Z.getColorByMaterial(e,t),enabled:!!e,staleTime:300*1e3}))});return i.map(({resolvedName:e,color:t},n)=>({resolvedName:e,colorLabel:(a[n]?.data?.color_name??null)||Tf(t)}))}var PW=Array.from({length:6},(e,t)=>t+1),jOe=0;function FW(e){let t=new Map,n;for(let r of e??[]){if(r.id===jOe){n=r;continue}let e=r.id-15;e>=1&&e<=6&&t.set(e,r)}let r=PW.filter(e=>!t.has(e));return r.length===1&&n&&(n.nozzle_diameter||n.nozzle_type)&&t.set(r[0],n),t}function IW(e,t){if(!e||!e.nozzle_diameter&&!e.nozzle_type)return!1;let n=Number.parseFloat(e.nozzle_diameter),r=Number.parseFloat(t.nozzle_diameter);if(!Number.isFinite(n)||!Number.isFinite(r)||Math.abs(n-r)>.005)return!1;let i=(t.volume_type||``).trim().toLowerCase();if(i&&e.nozzle_type){let t=e.nozzle_type.toUpperCase().startsWith(`HH`);if(i.startsWith(`high flow`)!==t)return!1}return!0}function MOe(e,t,n){let r=FW(e);return PW.map(e=>{let i=r.get(e),a=IW(i,t),o;return a||(o=i?n(`printModal.rackWrongNozzle`,{has:`${i.nozzle_diameter||`?`} ${i.nozzle_type||``}`.trim(),needs:`${t.nozzle_diameter} ${t.volume_type}`.trim()}):n(`printModal.rackEmptyPosition`)),{position:e,diameter:i?.nozzle_diameter??``,nozzleType:i?.nozzle_type??``,filamentColor:i?.filament_color??``,eligible:a,reason:o}})}function NOe(e,t,n={}){let r=FW(e),i={},a=new Set,o=[...t.keys()].filter(e=>t.get(e).on_rack).sort((e,t)=>e-t);for(let e of o){let o=n[e];if(o!=null){if(a.has(o)||!IW(r.get(o),t.get(e)))return null;i[e]=o,a.add(o)}}for(let e of o){if(i[e]!=null)continue;let n=t.get(e),o=PW.filter(e=>!a.has(e)&&IW(r.get(e),n));if(o.length===0)return null;let s=LW(n.filament_color),c=(s?o.find(e=>LW(r.get(e)?.filament_color)===s):void 0)??o[0];i[e]=c,a.add(c)}return i}function LW(e){return(e??``).trim().replace(/^#/,``).slice(0,6).toUpperCase()}function RW({printerId:e,filamentReqs:t,manualMappings:n,onManualMappingChange:r,onEstimatedCostChange:i,budgetAvailable:a,quantity:o=1,currencySymbol:s,defaultCostPerKg:c,defaultExpanded:l=!1,forceColorMatch:u,onForceColorMatchChange:d,plateLabel:f,archiveAmsMapping:p,nozzleRackChoice:m,onNozzleRackChoiceChange:h}){let{t:g}=U(),_=co(),[v,b]=(0,y.useState)(!1),[x,S]=(0,y.useState)(l),[C,w]=(0,y.useState)(!1),T=(0,y.useRef)([]);(0,y.useEffect)(()=>{w(!1),T.current=[]},[p,f,e]);let E=()=>{if(!p||!t?.filaments)return;if(C){let e={...n};for(let t of T.current)delete e[t];r(e),T.current=[],w(!1);return}let e={...n},i=[];for(let n of t.filaments){let t=n.slot_id-1;n.slot_id>0&&t>=0&&t<p.length&&p[t]>=0&&(e[n.slot_id]=p[t],i.push(n.slot_id))}r(e),T.current=i,w(!0)},{data:D}=K({queryKey:[`printer-status`,e],queryFn:()=>Z.getPrinterStatus(e),enabled:!!e}),{data:O}=K({queryKey:[`spool-assignments`,e],queryFn:()=>Z.getAssignments(e),enabled:!!e}),{data:k}=K({queryKey:[`settings`],queryFn:Z.getSettings}),{data:A}=K({queryKey:[`printer-inventory-remain`,e],queryFn:()=>Z.getInventoryRemain(e),enabled:!!e,staleTime:30*1e3,refetchOnMount:`always`}),j=(0,y.useMemo)(()=>{if(!A?.inventory_remain_g)return;let e=new Map;return Object.entries(A.inventory_remain_g).forEach(([t,n])=>{let r=Number(t);Number.isNaN(r)||e.set(r,n)}),e},[A]),M=(0,y.useMemo)(()=>{let e=A?.slot_materials;if(!e?.length)return;let t=new Map;return e.forEach(e=>{e.spool&&t.set(e.global_tray_id,e.spool)}),t.size>0?t:void 0},[A]),{loadedFilaments:N,filamentComparison:P,hasTypeMismatch:F,hasColorMismatch:I}=EW(t,D,n,zp(k?.prefer_lowest_filament,D?.ams_filament_backup),j,M),L=NW(t?.filaments),R=(0,y.useMemo)(()=>{let e=new Map;for(let t of O||[]){let n=t.ams_id===255,r=kp(t.ams_id,t.tray_id,n);e.set(r,t.spool?.cost_per_kg??null)}return e},[O]),z=(0,y.useMemo)(()=>{let e=new Map;for(let t of O||[]){let n=t.ams_id===255,r=kp(t.ams_id,t.tray_id,n),i=t.spool;if(!i){e.set(r,null);continue}e.set(r,Math.max(0,Math.round((i.label_weight??0)-(i.weight_used??0))))}return e},[O]),B=(0,y.useMemo)(()=>{let e=0;for(let t of P){let n=t.loaded?.globalTrayId;if(n==null)continue;let r=R.get(n)??null??c;r>0&&(e+=t.used_grams/1e3*r)}return e},[P,R,c]),V=(0,y.useRef)(i);(0,y.useEffect)(()=>{V.current=i},[i]),(0,y.useEffect)(()=>{V.current?.(B>0?B:null)},[B]);let ee=(0,y.useMemo)(()=>Array.from(R.values()).some(e=>e!=null&&e>0),[R]),te=B*Math.max(1,o),ne=a!=null&&te>a,re=t?.filaments&&t.filaments.length>0,ie=t?.filaments?.some(e=>e.nozzle_id!=null)??!1,ae=(0,y.useMemo)(()=>{let e=new Map;for(let n of t?.filaments??[])n.group_id!=null&&n.group&&e.set(n.group_id,n.group);return e},[t]),oe=(D?.nozzle_rack?.some(e=>e.id>=16)??!1)&&[...ae.values()].some(e=>e.on_rack),se=(0,y.useMemo)(()=>oe?NOe(D?.nozzle_rack,ae,m??{})??m??{}:{},[oe,D?.nozzle_rack,ae,m]),H=(e,t)=>{h&&h({...se,[e]:t})},ce=D?.fila_switch?.installed===!0,le=D?.ams_switch_inlet,ue=e=>ce&&le?.[String(e)]||null,de=(0,y.useMemo)(()=>{if(!ce)return null;let e=new Set;for(let t of P){if(!t.loaded||t.loaded.isExternal)return null;let n=ue(t.loaded.amsId);if(!n)return null;e.add(n)}return P.length<2||e.size!==1?null:[...e][0]},[ce,le,P]);if(!re||!D)return null;let fe=F?`#f97316`:I?`#facc15`:`#00ae42`,pe=(e,t)=>{if(e>0)if(t===``){let t={...n};delete t[e],r(t)}else r({...n,[e]:parseInt(t,10)})};return(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>S(!x),className:`flex items-center gap-2 text-sm text-bambu-gray hover:text-white transition-colors w-full`,children:[(0,G.jsx)(Os,{className:`w-4 h-4`,fill:fe,stroke:`none`}),(0,G.jsx)(`span`,{children:f?`${g(`printModal.filamentMapping`)} — ${f}`:g(`printModal.filamentMapping`)}),F?(0,G.jsxs)(`span`,{className:`text-xs text-orange-700 dark:text-orange-400`,children:[`(`,g(`printModal.statusTypeNotFound`),`)`]}):I?(0,G.jsxs)(`span`,{className:`text-xs text-yellow-700 dark:text-yellow-400`,children:[`(`,g(`printModal.statusColorMismatch`),`)`]}):(0,G.jsxs)(`span`,{className:`text-xs text-bambu-green`,children:[`(`,g(`printModal.statusReady`),`)`]}),x?(0,G.jsx)(gs,{className:`w-4 h-4 ml-auto`}):(0,G.jsx)(ps,{className:`w-4 h-4 ml-auto`})]}),x&&(0,G.jsxs)(`div`,{className:`mt-2 bg-bambu-dark rounded-lg p-3 space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:g(`printModal.clickToChangeSlot`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[p&&(0,G.jsxs)(`button`,{type:`button`,onClick:E,title:g(`printModal.useArchiveMappingTooltip`),className:`flex items-center gap-1 px-2 py-0.5 text-xs rounded border transition-colors ${C?`border-bambu-green bg-bambu-green/10 text-bambu-green`:`border-bambu-gray/30 hover:border-bambu-gray hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(fs,{className:`w-3 h-3`}),(0,G.jsx)(`span`,{children:g(`printModal.useArchiveMapping`)})]}),(0,G.jsxs)(`button`,{type:`button`,onClick:async()=>{b(!0);try{await Z.refreshPrinterStatus(e),await new Promise(e=>setTimeout(e,500)),await _.refetchQueries({queryKey:[`printer-status`,e]})}finally{b(!1)}},className:`flex items-center gap-1 px-2 py-0.5 text-xs rounded border border-bambu-gray/30 hover:border-bambu-gray hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray hover:text-white`,disabled:v,children:[(0,G.jsx)(Vl,{className:`w-3 h-3 ${v?`animate-spin`:``}`}),(0,G.jsx)(`span`,{children:g(`printModal.reRead`)})]})]})]}),de&&(0,G.jsxs)(`div`,{className:`flex items-start gap-1.5 rounded border border-yellow-500/40 bg-yellow-500/10 px-2 py-1.5 text-xs text-yellow-700 dark:text-yellow-400`,children:[(0,G.jsx)(Iu,{className:`w-3 h-3 mt-0.5 shrink-0`}),(0,G.jsx)(`span`,{children:g(`printModal.ftsSameInletHint`,{inlet:de})})]}),P.map((e,t)=>{let n=e.slot_id??0,r=n>0&&d!=null,{resolvedName:i,colorLabel:a}=L[t]??{resolvedName:e.type,colorLabel:Tf(e.color)},[o,s]=nee({name:a,hex:e.color},{name:e.loaded?.colorName,hex:e.loaded?.color});return(0,G.jsxs)(`div`,{className:`space-y-1`,children:[(0,G.jsxs)(`div`,{className:`grid items-center gap-2 text-xs`,style:{gridTemplateColumns:oe?`16px minmax(210px, 1.4fr) auto 2fr 16px`:`16px minmax(70px, 1fr) auto 2fr 16px`},children:[(0,G.jsx)(`span`,{title:g(`printModal.requiredTooltip`,{name:i,color:o}),children:(0,G.jsx)(Os,{className:`w-3 h-3`,fill:e.color,stroke:e.color})}),(0,G.jsxs)(`span`,{className:`text-white flex items-center gap-1 min-w-0`,children:[oe&&e.group_id!=null&&e.group?e.group.on_rack?(0,G.jsx)(`select`,{value:se[e.group_id]??``,onChange:t=>H(e.group_id,Number(t.target.value)),disabled:!h,title:g(`printModal.rackPositionTooltip`),"aria-label":g(`printModal.rackPosition`),className:`shrink-0 bg-bambu-dark-tertiary text-white text-[10px] font-bold rounded px-1 py-0.5 border border-bambu-dark-tertiary focus:border-bambu-green outline-none disabled:opacity-60`,children:MOe(D?.nozzle_rack,e.group,g).map(e=>(0,G.jsxs)(`option`,{value:e.position,disabled:!e.eligible,title:e.reason,children:[`R`,e.position,e.diameter?` · ${e.diameter}`:``]},e.position))}):(0,G.jsx)(`span`,{className:`inline-flex items-center justify-center w-3.5 h-3.5 rounded text-[9px] font-bold leading-none bg-bambu-gray/20 text-bambu-gray shrink-0`,title:g(`printModal.leftNozzleTooltip`),children:g(`printModal.leftNozzle`)}):ie&&e.nozzle_id!=null?(0,G.jsx)(`span`,{className:`inline-flex items-center justify-center w-3.5 h-3.5 rounded text-[9px] font-bold leading-none bg-bambu-gray/20 text-bambu-gray shrink-0`,title:e.nozzle_id===1?g(`printModal.leftNozzleTooltip`):g(`printModal.rightNozzleTooltip`),children:e.nozzle_id===1?g(`printModal.leftNozzle`):g(`printModal.rightNozzle`)}):null,(0,G.jsx)(`span`,{className:`truncate min-w-0`,title:i,children:i}),(0,G.jsxs)(`span`,{className:`text-bambu-gray shrink-0 whitespace-nowrap`,children:[`(`,e.used_grams,`g)`]})]}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`→`}),(0,G.jsx)(jW,{value:e.loaded?.globalTrayId==null?``:String(e.loaded.globalTrayId),onChange:e=>pe(n,e),placeholder:`-- ${g(`printModal.selectSlot`)} --`,ariaLabel:g(`printModal.slotForFilament`,{name:i}),exactMatchLabel:g(`printModal.exactColorMatch`),className:`${e.status===`match`?`border-bambu-green/50 text-bambu-green`:e.status===`type_only`?`border-yellow-500 dark:border-yellow-400/50 text-yellow-700 dark:text-yellow-400`:`border-orange-500 dark:border-orange-400/50 text-orange-700 dark:text-orange-400`} ${e.isManual?`ring-1 ring-blue-400/50`:``}`,title:e.isManual?g(`printModal.manuallySelected`):g(`printModal.autoMatched`),options:N.map(t=>{let n=z.get(t.globalTrayId),r=n==null?``:g(`printModal.slotRemainingShort`,{grams:n,defaultValue:` - ${n}g left`}),i=ue(t.amsId),a=i==null?``:` [${pp[i]}]`;return{value:String(t.globalTrayId),label:`${t.label}: ${t.spoolName||t.traySubBrands||t.type} (${t.colorName})`,meta:`${r}${a}`,rgba:t.color,extraColors:t.extraColors,effectType:t.effectType,subtype:t.spoolSubtype,hex:MW(t.color),exactMatch:fp(e.color)!==``&&fp(t.color)===fp(e.color)}})}),e.status===`match`?(0,G.jsx)(fs,{className:`w-3 h-3 text-bambu-green`}):e.status===`type_only`?(0,G.jsx)(`span`,{title:o&&s?g(`printModal.sameTypeDifferentColorDetail`,{required:o,loaded:s}):g(`printModal.sameTypeDifferentColor`),children:(0,G.jsx)(Iu,{className:`w-3 h-3 text-yellow-600 dark:text-yellow-400`})}):(0,G.jsx)(`span`,{title:g(`printModal.filamentTypeNotLoaded`),children:(0,G.jsx)(Iu,{className:`w-3 h-3 text-orange-600 dark:text-orange-400`})})]}),r&&(0,G.jsxs)(`label`,{className:`inline-flex items-center gap-1.5 text-xs text-bambu-gray cursor-pointer select-none pl-5`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:u?.[n]??!1,onChange:e=>d(n,e.target.checked),className:`accent-bambu-green w-3 h-3`}),(0,G.jsx)(Cl,{className:`w-3 h-3`}),g(`printModal.forceColorMatch`)]})]},t)}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray`,children:[g(`printModal.totalCost`),` `,(0,G.jsx)(`span`,{className:`text-white`,children:B>0||ee?`${s}${B.toFixed(2)}`:`N/A`}),o>1&&B>0&&(0,G.jsx)(`span`,{className:`ml-2`,children:g(`printModal.totalCostForQuantity`,`total: {{cost}}`,{cost:`${s}${te.toFixed(2)}`})})]}),ne&&(0,G.jsx)(`p`,{className:`text-xs text-red-400 mt-2`,children:g(`printModal.insufficientBudget`,`Insufficient budget for this cost center.`)}),F&&(0,G.jsx)(`p`,{className:`text-xs text-orange-700 dark:text-orange-400 mt-2`,children:g(`printModal.requiredTypeNotInPrinter`)})]})]})}function zW({filamentReqs:e,availableFilaments:t,overrides:n,onChange:r,forceColorMatch:i,onForceColorMatchChange:a,plateLabel:o,showHint:s=!0}){let{t:c}=U(),l=NW(e?.filaments),u=(0,y.useMemo)(()=>{let e={};for(let n of t){let t=yp(n.type);e[t]||(e[t]=[]),e[t].push(n)}return e},[t]),d=e?.filaments;if(!d||d.length===0||t.length===0)return null;let f=(e,t)=>{if(t===``){let t={...n};delete t[e],r(t)}else{let[i,a]=t.split(`|`);r({...n,[e]:{type:i,color:a}})}};return(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsx)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray mb-2`,children:(0,G.jsx)(`span`,{children:o?`${c(`printModal.filamentOverride`)} — ${o}`:c(`printModal.filamentOverride`)})}),s&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:c(`printModal.filamentOverrideHint`)}),(0,G.jsx)(`div`,{className:`bg-bambu-dark rounded-lg p-3 space-y-2`,children:d.map((e,t)=>{let r=n[e.slot_id],o=!!r,s=u[yp(e.type)]||[],d=e.nozzle_id==null?s:s.filter(t=>t.extruder_id==null||t.extruder_id===e.nozzle_id),{resolvedName:p,colorLabel:m}=l[t]??{resolvedName:e.type,colorLabel:Tf(e.color)};return(0,G.jsxs)(`div`,{className:`space-y-1`,children:[(0,G.jsxs)(`div`,{className:`grid items-center gap-2 text-xs`,style:{gridTemplateColumns:`16px minmax(70px, 1fr) auto 2fr 20px`},children:[(0,G.jsx)(`span`,{title:`${c(`printModal.originalFilament`)}: ${p} - ${m}`,children:(0,G.jsx)(Os,{className:`w-3 h-3`,fill:e.color,stroke:e.color})}),(0,G.jsxs)(`span`,{className:`text-white truncate`,children:[p,` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[`(`,e.used_grams,`g)`]})]}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`→`}),(0,G.jsx)(jW,{value:o?`${r.type}|${r.color}`:``,onChange:t=>f(e.slot_id,t),placeholder:`${c(`printModal.originalFilament`)}: ${p} (${m})`,placeholderOption:{rgba:e.color,hex:MW(e.color)},disabled:d.length===0,ariaLabel:c(`printModal.overrideForFilament`,{name:p}),exactMatchLabel:c(`printModal.exactColorMatch`),className:o?`border-blue-500/50 dark:border-blue-400/50 text-blue-700 dark:text-blue-400`:`border-bambu-gray/30 text-bambu-gray`,options:d.map((t,n)=>({value:`${t.type}|${t.color}`,key:`${t.type}-${t.color}-${t.tray_sub_brands}-${n}`,label:`${t.tray_sub_brands||t.type} (${Tf(t.color,t.tray_sub_brands)})`,rgba:t.color,hex:MW(t.color),exactMatch:fp(e.color)!==``&&fp(t.color)===fp(e.color)}))}),o?(0,G.jsx)(`button`,{type:`button`,onClick:()=>f(e.slot_id,``),className:`text-bambu-gray hover:text-white transition-colors`,title:c(`printModal.resetToOriginal`),children:(0,G.jsx)(Ul,{className:`w-3 h-3`})}):(0,G.jsx)(`span`,{className:`w-3`})]}),(0,G.jsxs)(`label`,{className:`inline-flex items-center gap-1.5 text-xs text-bambu-gray cursor-pointer select-none pl-5`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:i?.[e.slot_id]??!1,onChange:t=>a?.(e.slot_id,t.target.checked),className:`accent-bambu-green w-3 h-3`}),(0,G.jsx)(Cl,{className:`w-3 h-3`}),c(`printModal.forceColorMatch`)]})]},e.slot_id)})})]})}function POe({plates:e,isMultiPlate:t,selectedPlates:n,onToggle:r,onSelectAll:i,onDeselectAll:a,multiSelect:o,quantities:s,onQuantityChange:c}){let{t:l}=U();if(!t||e.length<=1)return null;let u=n.size===e.length,d=!!s&&!!c,f=d?e.reduce((e,t)=>n.has(t.index)?e+(s[t.index]??1):e,0):0;return(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-2`,children:[(0,G.jsx)(qc,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[`Select Plate`,o?`s`:``,` to Print`]}),n.size===0&&(0,G.jsxs)(`span`,{className:`text-xs text-orange-700 dark:text-orange-400 flex items-center gap-1`,children:[(0,G.jsx)(Iu,{className:`w-3 h-3`}),`Selection required`]}),o&&i&&a&&(0,G.jsx)(`button`,{type:`button`,onClick:u?a:i,className:`ml-auto text-xs px-2 py-0.5 rounded-full border transition-colors ${u?`border-bambu-green bg-bambu-green/10 text-bambu-green`:`border-bambu-dark-tertiary text-bambu-gray hover:border-bambu-gray`}`,children:u?l(`queue.deselectAll`):l(`queue.selectAllPlates`,{count:e.length})})]}),(0,G.jsx)(`div`,{className:`grid grid-cols-2 gap-2`,children:e.map(e=>{let t=n.has(e.index);return(0,G.jsxs)(`div`,{className:`flex items-center gap-2 p-2 rounded-lg border transition-colors ${t?`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary bg-bambu-dark hover:border-bambu-gray`}`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>r(e.index),className:`flex items-center gap-2 text-left min-w-0 flex-1`,children:[o&&(t?(0,G.jsx)(_u,{className:`w-4 h-4 text-bambu-green flex-shrink-0`}):(0,G.jsx)(yu,{className:`w-4 h-4 text-bambu-gray flex-shrink-0`})),e.has_thumbnail&&e.thumbnail_url!=null?(0,G.jsx)(`img`,{src:_d(e.thumbnail_url),alt:`Plate ${e.index}`,className:`w-10 h-10 rounded object-cover bg-bambu-dark-tertiary`}):(0,G.jsx)(`div`,{className:`w-10 h-10 rounded bg-bambu-dark-tertiary flex items-center justify-center`,children:(0,G.jsx)(qc,{className:`w-5 h-5 text-bambu-gray`})}),(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white font-medium truncate`,children:e.name||`Plate ${e.index}`}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray truncate`,children:[e.objects.length>0?e.objects.slice(0,3).join(`, `)+(e.objects.length>3?`...`:``):`${e.filaments.length} filament${e.filaments.length===1?``:`s`}`,e.print_time_seconds==null?``:` • ${op(e.print_time_seconds)}`]}),(()=>{let t=kW(e.bed_type);return t?(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray flex items-center gap-1 mt-0.5 truncate`,title:t.label,children:[(0,G.jsx)(`img`,{src:t.icon,alt:``,className:`w-3.5 h-3.5 object-contain flex-shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,children:t.label})]}):null})()]}),!o&&t&&(0,G.jsx)(fs,{className:`w-4 h-4 text-bambu-green flex-shrink-0`})]}),d&&t&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1 flex-shrink-0`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,"aria-hidden":`true`,children:`×`}),(0,G.jsx)(`input`,{type:`number`,min:1,max:999,value:s[e.index]??1,"aria-label":l(`queue.plateQuantityLabel`,{plate:e.name||l(`queue.plateNumber`,{index:e.index})}),onChange:t=>c(e.index,Math.max(1,Math.min(999,parseInt(t.target.value)||1))),className:`w-14 px-1.5 py-1 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-center focus:outline-none focus:ring-1 focus:ring-bambu-green`})]})]},e.index)})}),d&&f>n.size&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-2`,children:l(`queue.plateQuantityTotal`,{count:f})})]})}var FOe=new Set([`IDLE`,`FINISH`,`FAILED`]);function IOe({printerResult:e,filamentReqs:t,onUpdateConfig:n}){let r=co(),[i,a]=(0,y.useState)(!1),o=(t,r)=>{if(t<=0)return;let i={...e.config.manualMappings};r===``?delete i[t]:i[t]=parseInt(r,10),n({useDefault:!1,manualMappings:i,autoConfigured:!1})},s=async()=>{a(!0);try{await Z.refreshPrinterStatus(e.printerId),await new Promise(e=>setTimeout(e,500)),await r.refetchQueries({queryKey:[`printer-status`,e.printerId]})}finally{a(!1)}},c=t.map(t=>{let n=t.slot_id||0,i=e.config.manualMappings[n],a,o=!1;if(i!==void 0)a=e.loadedFilaments.find(e=>e.globalTrayId===i),o=!0;else{let n=new Set(Object.values(e.config.manualMappings)),i=r.getQueryData([`settings`]);a=ree(t,e.loadedFilaments,n,zp(i?.prefer_lowest_filament,e.status?.ams_filament_backup),e.inventoryByTrayId)}let s=`mismatch`;if(a){let e=bp(a.type,t.type),n=fp(a.color)===fp(t.color)||xp(a.color,t.color);e&&n?s=`match`:e&&(s=`type_only`)}return{req:t,loaded:a,status:s,isManual:o}});return(0,G.jsxs)(`div`,{className:`mt-2 bg-bambu-dark rounded-lg p-3 space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`Custom slot mapping`}),(0,G.jsxs)(`button`,{type:`button`,onClick:s,className:`flex items-center gap-1 px-2 py-0.5 text-xs rounded border border-bambu-gray/30 hover:border-bambu-gray hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray hover:text-white`,disabled:i,children:[(0,G.jsx)(Vl,{className:`w-3 h-3 ${i?`animate-spin`:``}`}),(0,G.jsx)(`span`,{children:`Re-read`})]})]}),c.map(({req:t,loaded:n,status:r,isManual:i},a)=>(0,G.jsxs)(`div`,{className:`grid items-center gap-2 text-xs`,style:{gridTemplateColumns:`16px minmax(70px, 1fr) auto 2fr 16px`},children:[(0,G.jsx)(`span`,{title:`Required: ${t.type} - ${Tf(t.color)}`,children:(0,G.jsx)(Os,{className:`w-3 h-3`,fill:t.color,stroke:t.color})}),(0,G.jsxs)(`span`,{className:`text-white flex items-center gap-1 min-w-0`,children:[(0,G.jsx)(`span`,{className:`truncate min-w-0`,title:t.type,children:t.type}),(0,G.jsxs)(`span`,{className:`text-bambu-gray shrink-0 whitespace-nowrap`,children:[`(`,t.used_grams,`g)`]})]}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`→`}),(0,G.jsxs)(`select`,{value:n?.globalTrayId??``,onChange:e=>o(t.slot_id||0,e.target.value),className:`flex-1 px-2 py-1 rounded border text-xs bg-bambu-dark-secondary focus:outline-none focus:ring-1 focus:ring-bambu-green ${r===`match`?`border-bambu-green/50 text-bambu-green`:r===`type_only`?`border-yellow-500 dark:border-yellow-400/50 text-yellow-700 dark:text-yellow-400`:`border-orange-500 dark:border-orange-400/50 text-orange-700 dark:text-orange-400`} ${i?`ring-1 ring-blue-400/50`:``}`,title:i?`Manually selected`:`Auto-matched`,children:[(0,G.jsx)(`option`,{value:``,className:`bg-bambu-dark text-bambu-gray`,children:`-- Select slot --`}),iee(e.loadedFilaments,t.nozzle_id).map(e=>(0,G.jsxs)(`option`,{value:e.globalTrayId,className:`bg-bambu-dark text-white`,children:[e.label,`: `,e.traySubBrands||e.type,` (`,e.colorName,`)`]},e.globalTrayId))]}),r===`match`?(0,G.jsx)(fs,{className:`w-3 h-3 text-bambu-green`}):r===`type_only`?(0,G.jsx)(`span`,{title:`Same type, different color`,children:(0,G.jsx)(Iu,{className:`w-3 h-3 text-yellow-600 dark:text-yellow-400`})}):(0,G.jsx)(`span`,{title:`Filament type not loaded`,children:(0,G.jsx)(Iu,{className:`w-3 h-3 text-orange-600 dark:text-orange-400`})})]},a))]})}function LOe({printers:e,selectedPrinterIds:t,onMultiSelect:n,isLoading:r=!1,allowMultiple:i=!1,showInactive:a=!1,disableBusy:o=!1,printerMappingResults:s,filamentReqs:c,onAutoConfigurePrinter:l,onUpdatePrinterConfig:u,assignmentMode:d=`printer`,onAssignmentModeChange:f,targetModel:p,onTargetModelChange:m,targetLocation:h,onTargetLocationChange:g,slicedForModel:_}){let[v,b]=(0,y.useState)(!1),x=a?e:e.filter(e=>e.is_active),S=Co({queries:x.map(e=>({queryKey:[`printerStatus`,e.id],queryFn:()=>Z.getPrinterStatus(e.id),staleTime:5e3}))}),C=(0,y.useMemo)(()=>{let e=new Map;return x.forEach((t,n)=>{let r=S[n];r?.data&&e.set(t.id,r.data)}),e},[x,S]),w=e=>{let t=C.get(e);return t?t.connected?!FOe.has(t.state??``):!0:!1},T=e=>{let t=C.get(e);if(!t)return null;if(!t.connected)return`Offline`;let n=t.state;return n?n===`RUNNING`?t.stg_cur_name||`Printing`:n===`PREPARE`?`Preparing`:n===`PAUSE`?`Paused`:n===`IDLE`?`Idle`:n===`FINISH`?`Finished`:n===`FAILED`?`Failed`:n:null},E=(0,y.useMemo)(()=>{if(d!==`printer`||!_||v)return x;let e=x.filter(e=>e.model===_);return e.length>0?e:x},[x,d,_,v]),D=x.length-E.length,O=(0,y.useMemo)(()=>{let e=x.map(e=>e.model).filter(e=>!!e);return[...new Set(e)].sort()},[x]),k=(0,y.useMemo)(()=>{if(!p)return[];let e=x.filter(e=>e.model===p&&e.location).map(e=>e.location).filter(e=>!!e);return[...new Set(e)].sort()},[x,p]),A=f&&m&&O.length>0,j=i&&t.length>1&&s&&c?.filaments&&c.filaments.length>0&&l&&u;if(r)return(0,G.jsx)(`div`,{className:`flex justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})});if(E.length===0)return(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-red-700 dark:text-red-400 text-sm mb-4`,children:[(0,G.jsx)(ys,{className:`w-4 h-4`}),`No `,a?``:`active `,`printers available`]});let M=e=>{o&&w(e)||(i?t.includes(e)?n(t.filter(t=>t!==e)):n([...t,e]):n([e]))},N=()=>{n((o?E.filter(e=>!w(e.id)):E).map(e=>e.id))},P=()=>{n([])},F=(e,t,n)=>{n.stopPropagation(),!(!l||!u)&&(t?l(e):u(e,{useDefault:!0,manualMappings:{},autoConfigured:!1}))},I=e=>t.includes(e),L=t.length,R=e=>s?.find(t=>t.printerId===e);return(0,G.jsxs)(`div`,{className:`space-y-2 mb-6`,children:[A&&(0,G.jsxs)(`div`,{className:`flex gap-2 mb-4`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{f(`printer`),m(null)},className:`flex-1 flex items-center justify-center gap-2 px-3 py-2 rounded-lg border transition-colors ${d===`printer`?`border-bambu-green bg-bambu-green/10 text-white`:`border-bambu-dark-tertiary bg-bambu-dark text-bambu-gray hover:border-bambu-gray`}`,children:[(0,G.jsx)(Ll,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-sm`,children:`Specific Printer`})]}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{f(`model`),n([]),m(_&&O.includes(_)?_:null)},className:`flex-1 flex items-center justify-center gap-2 px-3 py-2 rounded-lg border transition-colors ${d===`model`?`border-bambu-green bg-bambu-green/10 text-white`:`border-bambu-dark-tertiary bg-bambu-dark text-bambu-gray hover:border-bambu-gray`}`,children:[(0,G.jsx)(Hu,{className:`w-4 h-4`}),(0,G.jsxs)(`span`,{className:`text-sm`,children:[`Any `,(d===`model`?p:null)||_||`Model`]})]})]}),d===`model`&&A&&(0,G.jsxs)(`div`,{className:`space-y-3 mb-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:[`Target Model`,_&&(0,G.jsxs)(`span`,{className:`ml-2 text-bambu-gray/70`,children:[`(sliced for `,_,`)`]})]}),(0,G.jsxs)(`select`,{value:p||``,onChange:e=>{m(e.target.value||null),g&&g(null)},className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,children:[(0,G.jsx)(`option`,{value:``,children:`Select a model...`}),O.map(e=>{let t=gm(_,e);return(0,G.jsxs)(`option`,{value:e,disabled:!t,children:[e,t?``:` — incompatible with ${_} G-code`]},e)})]})]}),_&&p&&p!==_&&(gm(_,p)?(0,G.jsxs)(`div`,{className:`p-3 bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30 rounded-lg flex items-center gap-2`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-600 dark:text-yellow-400 flex-shrink-0`}),(0,G.jsxs)(`span`,{className:`text-sm text-yellow-700 dark:text-yellow-400`,children:[`File was sliced for `,_,`, but will be dispatched to a `,p,` printer`]})]}):(0,G.jsxs)(`div`,{className:`p-3 bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 rounded-lg flex items-center gap-2`,children:[(0,G.jsx)(ys,{className:`w-4 h-4 text-red-600 dark:text-red-400 flex-shrink-0`}),(0,G.jsxs)(`span`,{className:`text-sm text-red-700 dark:text-red-400`,children:[`File was sliced for `,_,` and cannot be dispatched to `,p,` printers — select a compatible model`]})]})),p&&k.length>0&&g&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:`Location Filter (optional)`}),(0,G.jsxs)(`select`,{value:h||``,onChange:e=>g(e.target.value||null),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,children:[(0,G.jsx)(`option`,{value:``,children:`Any location`}),k.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]})]}),p&&(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[`Scheduler will assign to first available idle `,p,` printer`,h?` in ${h}`:``]})]}),d===`printer`&&i&&E.length>1&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-xs text-bambu-gray mb-2`,children:[(0,G.jsx)(`span`,{children:L===0?`Select printers`:`${L} printer${L===1?``:`s`} selected`}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[L<E.length&&(0,G.jsx)(`button`,{type:`button`,onClick:N,className:`text-bambu-green hover:text-bambu-green/80 transition-colors`,children:`Select all`}),L>0&&(0,G.jsx)(`button`,{type:`button`,onClick:P,className:`text-bambu-gray hover:text-white transition-colors`,children:`Clear`})]})]}),d===`printer`&&E.map(e=>{let t=I(e.id),n=R(e.id),r=n&&!n.config.useDefault,a=w(e.id),s=o&&a,d=T(e.id);return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>M(e.id),disabled:s,className:`w-full flex items-center gap-3 p-3 rounded-lg border transition-colors ${s?`border-bambu-dark-tertiary bg-bambu-dark opacity-50 cursor-not-allowed`:t?`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary bg-bambu-dark hover:border-bambu-gray`} ${e.is_active?``:`opacity-60`}`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg ${s?`bg-bambu-dark-tertiary`:t?`bg-bambu-green/20`:`bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(Ll,{className:`w-5 h-5 ${s?`text-bambu-gray/50`:t?`text-bambu-green`:`text-bambu-gray`}`})}),(0,G.jsxs)(`div`,{className:`text-left flex-1`,children:[(0,G.jsxs)(`p`,{className:`font-medium ${s?`text-bambu-gray`:`text-white`}`,children:[e.name,!e.is_active&&(0,G.jsx)(`span`,{className:`text-bambu-gray text-xs ml-2`,children:`(inactive)`})]}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[e.model||`Unknown model`,` • `,e.ip_address]})]}),d&&(0,G.jsx)(`span`,{className:`text-xs px-2 py-0.5 rounded-full ${a?`bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`:`bg-bambu-green/20 text-bambu-green`}`,children:d}),i&&(0,G.jsx)(`div`,{className:`w-5 h-5 rounded border-2 flex items-center justify-center transition-colors ${s?`border-bambu-gray/30`:t?`bg-bambu-green border-bambu-green`:`border-bambu-gray/50`}`,children:t&&(0,G.jsx)(fs,{className:`w-3 h-3 text-white`})})]}),t&&j&&n&&(0,G.jsxs)(`div`,{className:`ml-4 mt-2 mb-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`label`,{className:`flex items-center gap-2 cursor-pointer`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:r,onChange:t=>F(e.id,t.target.checked,t),className:`w-3.5 h-3.5 rounded border-bambu-gray/30 bg-bambu-dark-secondary text-bambu-green focus:ring-bambu-green focus:ring-offset-0`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`Custom mapping`})]}),(0,G.jsxs)(`span`,{className:`text-xs ml-2 ${n.matchStatus===`full`?`text-bambu-green`:n.matchStatus===`partial`?`text-yellow-700 dark:text-yellow-400`:`text-orange-700 dark:text-orange-400`}`,children:[`(`,n.exactMatches,`/`,n.totalSlots,` matched)`]}),n.isLoading&&(0,G.jsx)(Vl,{className:`w-3 h-3 text-bambu-gray animate-spin`}),r&&(0,G.jsxs)(`button`,{type:`button`,onClick:t=>{t.stopPropagation(),l(e.id)},className:`ml-auto flex items-center gap-1 px-2 py-0.5 text-xs rounded border border-bambu-gray/30 hover:border-bambu-gray hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray hover:text-white`,children:[(0,G.jsx)(Ju,{className:`w-3 h-3`}),`Auto`]})]}),r&&(0,G.jsx)(IOe,{printerResult:n,filamentReqs:c.filaments,onUpdateConfig:t=>u(e.id,t)})]})]},e.id)}),d===`printer`&&D>0&&!v&&(0,G.jsxs)(`button`,{type:`button`,onClick:()=>b(!0),className:`text-xs text-bambu-gray hover:text-white transition-colors mt-2 flex items-center gap-1`,children:[(0,G.jsx)(Iu,{className:`w-3 h-3 text-yellow-600 dark:text-yellow-400`}),D,` other printer`,D>1?`s`:``,` hidden (different model) —`,(0,G.jsx)(`span`,{className:`underline`,children:`show all`})]}),d===`printer`&&v&&_&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>b(!1),className:`text-xs text-bambu-gray hover:text-white transition-colors mt-2`,children:(0,G.jsxs)(`span`,{className:`underline`,children:[`Show only `,_,` printers`]})}),d===`printer`&&L===0&&(0,G.jsxs)(`p`,{className:`text-xs text-orange-700 dark:text-orange-400 mt-1 flex items-center gap-1`,children:[(0,G.jsx)(ys,{className:`w-3 h-3`}),`Select at least one printer`]}),d===`model`&&!p&&(0,G.jsxs)(`p`,{className:`text-xs text-orange-700 dark:text-orange-400 mt-1 flex items-center gap-1`,children:[(0,G.jsx)(ys,{className:`w-3 h-3`}),`Select a target printer model`]})]})}var BW=[`off`,`auto`,`on`],VW={off:`bg-red-500 text-white`,auto:`bg-blue-500 text-white`,on:`bg-bambu-green text-white`},ROe=[`off`,`on`];function zOe({options:e,onChange:t,defaultExpanded:n=!1,showDualNozzleOptions:r=!1}){let{t:i}=U(),[a,o]=(0,y.useState)(n),s=[{key:`bed_levelling`,label:i(`settings.defaultBedLevelling`),desc:i(`settings.defaultBedLevellingDesc`),tristate:!0},{key:`flow_cali`,label:i(`settings.defaultFlowCali`),desc:i(`settings.defaultFlowCaliDesc`),tristate:!0},{key:`vibration_cali`,label:i(`settings.defaultVibrationCali`),desc:i(`settings.defaultVibrationCaliDesc`)},{key:`layer_inspect`,label:i(`settings.defaultLayerInspect`),desc:i(`settings.defaultLayerInspectDesc`)},{key:`timelapse`,label:i(`settings.defaultTimelapse`),desc:i(`settings.defaultTimelapseDesc`)},{key:`nozzle_offset_cali`,label:i(`settings.defaultNozzleOffsetCali`),desc:i(`settings.defaultNozzleOffsetCaliDesc`),dualNozzleOnly:!0,tristate:!0}].filter(e=>!e.dualNozzleOnly||r),c=(n,r)=>{t({...e,[n]:r})},l=(n,r)=>{t({...e,[n]:r})},u=n=>{t({...e,preheat_override:n,...n===`off`?{preheat_chamber_target_override:null}:{}})},d=n=>{if(n===``){t({...e,preheat_chamber_target_override:null});return}let r=parseInt(n,10);Number.isNaN(r)||t({...e,preheat_chamber_target_override:Math.max(0,Math.min(65,r))})};return(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>o(!a),className:`flex items-center gap-2 text-sm text-bambu-gray hover:text-white transition-colors w-full`,children:[(0,G.jsx)(nu,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:i(`queue.bulkEdit.printOptions`)}),a?(0,G.jsx)(gs,{className:`w-4 h-4 ml-auto`}):(0,G.jsx)(ps,{className:`w-4 h-4 ml-auto`})]}),a&&(0,G.jsxs)(`div`,{className:`mt-2 bg-bambu-dark rounded-lg p-3 space-y-2`,children:[s.map(({key:t,label:n,desc:r,tristate:a})=>a?(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:r})]}),(0,G.jsx)(`div`,{className:`flex gap-1 shrink-0`,children:BW.map(n=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>l(t,n),className:`px-2.5 py-1 text-xs rounded transition-colors ${e[t]===n?VW[n]:`bg-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,children:i(`settings.calibrationMode_${n}`)},n))})]},t):(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:r})]}),(0,G.jsx)(`div`,{className:`flex gap-1 shrink-0`,children:ROe.map(n=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>c(t,n===`on`),className:`px-2.5 py-1 text-xs rounded transition-colors ${(e[t]?`on`:`off`)===n?VW[n]:`bg-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,children:i(`settings.calibrationMode_${n}`)},n))})]},t)),(0,G.jsxs)(`div`,{className:`pt-2 mt-1 border-t border-bambu-dark-tertiary/60`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1.5`,children:[(0,G.jsx)(mc,{className:`w-3.5 h-3.5 text-amber-600 dark:text-amber-400`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:i(`settings.preheatTitle`,`Preheat & Heat Soak`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:i(`settings.preheatPerItemDesc`,`Heat the bed and chamber before this print starts. Defaults to the global Settings → Workflow toggle.`)}),(0,G.jsx)(`div`,{className:`flex gap-1.5 mb-2`,children:[`inherit`,`on`,`off`].map(t=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>u(t),className:`flex-1 px-2 py-1.5 text-xs rounded transition-colors ${e.preheat_override===t?`bg-bambu-green text-white`:`bg-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,children:i(`settings.preheatOverride_${t}`,t===`inherit`?`Inherit`:t===`on`?`On`:`Off`)},t))}),e.preheat_override!==`off`&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray flex-1`,children:i(`settings.preheatTargetOverride`,`Chamber target override (°C, blank = filament default)`)}),(0,G.jsx)(`input`,{type:`number`,min:0,max:65,step:1,value:e.preheat_chamber_target_override??``,onChange:e=>d(e.target.value),placeholder:`—`,className:`w-16 px-2 py-1 bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded text-white text-xs text-right focus:outline-none focus:border-bambu-green`})]}),e.preheat_override!==`off`&&(0,G.jsx)(`p`,{className:`text-[11px] text-bambu-gray mt-1`,children:i(`settings.preheatTargetOverrideHelp`,`0 heats the bed and runs the soak without the chamber. Leave blank and a print with no chamber requirement skips preheat entirely.`)})]})]})]})}function BOe({options:e,onChange:t,dateFormat:n=`system`,timeFormat:r=`system`,canControlPrinter:i=!0,showStagger:a=!1,printerCount:o=0,hasGcodeSnippets:s=!1}){let{t:c}=U(),[l,u]=(0,y.useState)(``),[d,f]=(0,y.useState)(``),[p,m]=(0,y.useState)(!0),[h,g]=(0,y.useState)(!0),_=(0,y.useRef)(null),v=(0,y.useRef)(!1);(0,y.useEffect)(()=>{if(e.scheduleType!==`scheduled`){v.current=!1;return}if(!v.current){v.current=!0;let i;e.scheduledTime?(i=new Date(e.scheduledTime),isNaN(i.getTime())&&(i=new Date,i.setHours(i.getHours()+1,0,0,0))):(i=new Date,i.setHours(i.getHours()+1,0,0,0),t({...e,scheduledTime:Qf(i)})),u(Kf(i,n)),f(qf(i,r)),m(!0),g(!0)}},[e.scheduleType,e.scheduledTime,n,r,t,e]);let b=n=>{t({...e,scheduleType:n,requireManualStart:n===`queue`?e.requireManualStart:!1})},x=(r,i)=>{let a=Xf(r,n),o=Zf(i);m(!!a),g(!!o),a&&o&&(a.setHours(o.hours,o.minutes,0,0),a>new Date&&t({...e,scheduledTime:Qf(a)}))},S=e=>{u(e),x(e,d)},C=e=>{f(e),x(l,e)};return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-2`,children:c(`printModal.whenToPrint`)}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(`button`,{type:`button`,className:`flex-1 px-2 py-2 rounded-lg border text-sm flex items-center justify-center gap-1.5 transition-colors ${e.scheduleType===`asap`?`bg-bambu-green border-bambu-green text-white`:`bg-bambu-dark border-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,onClick:()=>b(`asap`),children:[(0,G.jsx)(js,{className:`w-4 h-4`}),c(`printModal.asap`)]}),(0,G.jsxs)(`button`,{type:`button`,className:`flex-1 px-2 py-2 rounded-lg border text-sm flex items-center justify-center gap-1.5 transition-colors ${e.scheduleType===`queue`?`bg-bambu-green border-bambu-green text-white`:`bg-bambu-dark border-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,onClick:()=>b(`queue`),children:[(0,G.jsx)(Zc,{className:`w-4 h-4`}),c(`printModal.queue`)]}),(0,G.jsxs)(`button`,{type:`button`,className:`flex-1 px-2 py-2 rounded-lg border text-sm flex items-center justify-center gap-1.5 transition-colors ${e.scheduleType===`scheduled`?`bg-bambu-green border-bambu-green text-white`:`bg-bambu-dark border-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,onClick:()=>b(`scheduled`),children:[(0,G.jsx)(as,{className:`w-4 h-4`}),c(`printModal.schedule`)]})]})]}),e.scheduleType===`scheduled`&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:c(`printModal.dateTime`)}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex-1 relative`,children:[(0,G.jsx)(`input`,{type:`text`,className:`w-full px-3 py-2 pr-10 bg-bambu-dark border rounded-lg text-white focus:outline-none ${p?`border-bambu-dark-tertiary focus:border-bambu-green`:`border-red-500`}`,value:l,onChange:e=>S(e.target.value),placeholder:Wf(n)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>{_.current?.showPicker()},className:`absolute right-2 top-1/2 -translate-y-1/2 text-bambu-gray hover:text-white`,title:c(`printModal.openCalendar`),children:(0,G.jsx)(as,{className:`w-4 h-4`})}),(0,G.jsx)(`input`,{ref:_,type:`datetime-local`,className:`absolute top-0 left-0 w-0 h-0 opacity-0 pointer-events-none`,value:e.scheduledTime,onChange:i=>{let a=i.target.value;if(a){let i=new Date(a);isNaN(i.getTime())||(u(Kf(i,n)),f(qf(i,r)),m(!0),g(!0),t({...e,scheduledTime:a}))}},tabIndex:-1})]}),(0,G.jsx)(`div`,{className:`w-32`,children:(0,G.jsx)(`input`,{type:`text`,className:`w-full px-3 py-2 bg-bambu-dark border rounded-lg text-white focus:outline-none ${h?`border-bambu-dark-tertiary focus:border-bambu-green`:`border-red-500`}`,value:d,onChange:e=>C(e.target.value),placeholder:Gf(r)})})]}),(!p||!h)&&(0,G.jsx)(`p`,{className:`mt-1 text-xs text-red-700 dark:text-red-400`,children:c(`printModal.invalidDateTime`)})]}),e.scheduleType===`queue`&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`checkbox`,id:`requireManualStart`,checked:e.requireManualStart,onChange:n=>t({...e,requireManualStart:n.target.checked}),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsxs)(`label`,{htmlFor:`requireManualStart`,className:`text-sm flex items-center gap-1 text-bambu-gray`,children:[(0,G.jsx)(Mc,{className:`w-3.5 h-3.5`}),c(`printModal.requireManualStart`)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`checkbox`,id:`requirePrevious`,checked:e.requirePreviousSuccess,onChange:n=>t({...e,requirePreviousSuccess:n.target.checked}),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsx)(`label`,{htmlFor:`requirePrevious`,className:`text-sm text-bambu-gray`,children:c(`printModal.requirePreviousSuccess`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`checkbox`,id:`autoOffAfter`,checked:e.autoOffAfter,onChange:n=>t({...e,autoOffAfter:n.target.checked}),disabled:!i,className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green disabled:opacity-50`}),(0,G.jsxs)(`label`,{htmlFor:`autoOffAfter`,className:`text-sm flex items-center gap-1 ${i?`text-bambu-gray`:`text-bambu-gray/50`}`,children:[(0,G.jsx)(Il,{className:`w-3.5 h-3.5`}),c(`printModal.autoOffAfter`)]})]}),s&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`checkbox`,id:`gcodeInjection`,checked:e.gcodeInjection,onChange:n=>t({...e,gcodeInjection:n.target.checked}),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsxs)(`label`,{htmlFor:`gcodeInjection`,className:`text-sm flex items-center gap-1 text-bambu-gray`,children:[(0,G.jsx)(Fs,{className:`w-3.5 h-3.5`}),c(`printModal.gcodeInjection`,`Inject auto-print G-code`)]})]}),a&&e.scheduleType!==`queue`&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`checkbox`,id:`staggerEnabled`,checked:e.staggerEnabled,onChange:n=>t({...e,staggerEnabled:n.target.checked}),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsxs)(`label`,{htmlFor:`staggerEnabled`,className:`text-sm flex items-center gap-1 text-bambu-gray`,children:[(0,G.jsx)(qc,{className:`w-3.5 h-3.5`}),c(`printModal.staggerPrinterStarts`,`Stagger printer starts`)]})]}),e.staggerEnabled&&(0,G.jsxs)(`div`,{className:`ml-6 space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:c(`printModal.staggerGroupSize`,`Group size`)}),(0,G.jsx)(`input`,{type:`number`,min:1,max:o,value:e.staggerGroupSize,onChange:n=>t({...e,staggerGroupSize:Math.max(1,parseInt(n.target.value)||1)}),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`})]}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:c(`printModal.staggerInterval`,`Interval (min)`)}),(0,G.jsx)(`input`,{type:`number`,min:1,max:60,value:e.staggerIntervalMinutes,onChange:n=>t({...e,staggerIntervalMinutes:Math.max(1,parseInt(n.target.value)||1)}),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`})]})]}),o>0&&(()=>{let t=Math.ceil(o/e.staggerGroupSize),n=o%e.staggerGroupSize,r=(t-1)*e.staggerIntervalMinutes;return(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[c(`printModal.staggerPreview`,`{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min`,{printers:o,groups:t,size:e.staggerGroupSize,interval:e.staggerIntervalMinutes}),n!==0&&e.staggerGroupSize<o?` (${c(`printModal.staggerLastGroup`,`last group: {{count}}`,{count:n})})`:``,t>1?` (${c(`printModal.staggerTotal`,`total: {{minutes}} min`,{minutes:r})})`:``]})})()]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:e.scheduleType===`asap`?c(`printModal.helpAsap`):e.scheduleType===`scheduled`?c(`printModal.helpSchedule`):c(`printModal.helpQueue`)})]})}function HW({candidates:e,onReorder:t,plateByFile:n,onPlateChange:r,readOnly:i=!1,readOnlyNote:a}){let{t:o}=U(),s=Co({queries:i?[]:e.map(e=>({queryKey:[`library-file-plates`,e.id],queryFn:()=>Z.getLibraryFilePlates(e.id),staleTime:6e4}))}),c=(0,y.useMemo)(()=>{let t={};return e.forEach((e,n)=>{let r=s[n]?.data;r?.is_multi_plate&&r.plates.length>1&&(t[e.id]=r.plates.map(e=>({index:e.index,name:e.name})))}),t},[e,s]),l=(n,r)=>{if(r<0||r>=e.length)return;let i=[...e],[a]=i.splice(n,1);i.splice(r,0,a),t(i)};return(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-2`,children:[(0,G.jsx)(Ll,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:o(`printModal.variants.title`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:i?a??o(`printModal.variants.help`):o(`printModal.variants.help`)}),(0,G.jsx)(`div`,{className:`space-y-2`,children:e.map((t,a)=>{let s=c[t.id],u=t.sliced_for_model;return(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 rounded border border-bambu-dark-tertiary p-2`,children:[(0,G.jsxs)(`span`,{className:`text-xs font-mono text-bambu-gray w-5 shrink-0`,children:[a+1,`.`]}),(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded-full bg-bambu-green/10 text-bambu-green text-xs shrink-0`,children:u||o(`printModal.variants.unknownModel`)}),(0,G.jsx)(`span`,{className:`text-sm text-white truncate min-w-0 flex-1`,title:t.filename,children:t.filename}),s&&(0,G.jsxs)(`label`,{className:`flex items-center gap-1 text-xs text-bambu-gray shrink-0`,children:[(0,G.jsx)(qc,{className:`w-3 h-3`}),(0,G.jsx)(`select`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-1 py-0.5 text-xs text-white`,value:n[t.id]??s[0].index,onChange:e=>r(t.id,Number(e.target.value)),"aria-label":o(`printModal.variants.plateFor`,{filename:t.filename}),children:s.map(e=>(0,G.jsx)(`option`,{value:e.index,children:e.name||o(`printModal.plateN`,{n:e.index})},e.index))})]}),!i&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1 shrink-0`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>l(a,a-1),disabled:a===0,className:`p-1 rounded text-bambu-gray hover:text-white disabled:opacity-30`,"aria-label":o(`printModal.variants.moveUp`),children:(0,G.jsx)(Ho,{className:`w-3.5 h-3.5`})}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>l(a,a+1),disabled:a===e.length-1,className:`p-1 rounded text-bambu-gray hover:text-white disabled:opacity-30`,"aria-label":o(`printModal.variants.moveDown`),children:(0,G.jsx)(Io,{className:`w-3.5 h-3.5`})})]})]},t.id)})})]})}function VOe({costCenters:e,selectedCostCenterId:t,onChange:n}){let{t:r}=U();if(e.length===0)return null;let i=e.find(e=>e.id===t);return(0,G.jsxs)(`div`,{className:`space-y-1`,children:[(0,G.jsx)(`label`,{htmlFor:`printCostCenter`,className:`text-sm text-bambu-gray`,children:r(`printModal.costCenter`,`Cost center`)}),(0,G.jsx)(`select`,{id:`printCostCenter`,value:t??``,onChange:e=>n(e.target.value?Number(e.target.value):null),className:`w-full px-3 py-2 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded text-white focus:outline-none focus:ring-1 focus:ring-bambu-green`,children:e.map(e=>(0,G.jsxs)(`option`,{value:e.id,children:[e.name,e.is_private?` (${r(`printModal.personalDefault`,`Personal`)})`:``]},e.id))}),i?.budget_mode===`none`&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:r(`printModal.unlimitedNoBudget`,`Unlimited – no budget limit is set.`)})]})}var UW={bed_levelling:`auto`,flow_cali:`auto`,vibration_cali:!0,layer_inspect:!1,timelapse:!1,nozzle_offset_cali:`auto`,preheat_override:`inherit`,preheat_chamber_target_override:null},WW={scheduleType:`asap`,scheduledTime:``,requireManualStart:!1,requirePreviousSuccess:!1,autoOffAfter:!1,gcodeInjection:!1,staggerEnabled:!1,staggerGroupSize:2,staggerIntervalMinutes:5};function GW(e,t){let n=e=>(e||``).replace(`#`,``).toLowerCase().slice(0,6);return(e.type||``).toUpperCase()===(t.type||``).toUpperCase()&&n(e.color)===n(t.color)}function KW(e,t){let n=e=>{let n=t[e.slot_id];return!!n&&!GW(n,e)};return!e?.filaments||!e.filaments.some(n)?e:{...e,filaments:e.filaments.map(e=>n(e)?{...e,type:t[e.slot_id].type,color:t[e.slot_id].color,tray_info_idx:``}:e)}}function qW({mode:e,archiveId:t,libraryFileId:n,archiveName:r,queueItem:i,initialSelectedPrinterIds:a,onClose:o,onSuccess:s,projectId:c,cleanupLibraryAfterDispatch:l,variantFiles:u}){let{t:d}=U(),f=co(),{showToast:p}=Gd(),{hasPermission:m,user:h}=jd(),g=!!n&&!t,_=e===`edit-queue-item`,v=e===`create`&&(u?.length??0)>1,b=e===`edit-queue-item`&&(i?.variants?.length??0)>1?i.variants.map(e=>({id:e.library_file_id,filename:e.filename,sliced_for_model:e.target_model})):[],x=b.length>0,[S,C]=(0,y.useState)(u??[]),[w,T]=(0,y.useState)({}),[E,D]=(0,y.useState)(()=>e===`edit-queue-item`&&i?.printer_id?[i.printer_id]:a?.length?a:[]),[O,k]=(0,y.useState)(()=>e===`edit-queue-item`&&i?.plate_id!=null?new Set([i.plate_id]):new Set),A=O.size===1?[...O][0]:null,[j,M]=(0,y.useState)(1),[N,P]=(0,y.useState)({}),[F,I]=(0,y.useState)(()=>e===`edit-queue-item`&&i?{bed_levelling:i.bed_levelling??UW.bed_levelling,flow_cali:i.flow_cali??UW.flow_cali,vibration_cali:i.vibration_cali??UW.vibration_cali,layer_inspect:i.layer_inspect??UW.layer_inspect,timelapse:i.timelapse??UW.timelapse,nozzle_offset_cali:i.nozzle_offset_cali??UW.nozzle_offset_cali,preheat_override:i.preheat_override??UW.preheat_override,preheat_chamber_target_override:i.preheat_chamber_target_override??UW.preheat_chamber_target_override}:UW),[L,R]=(0,y.useState)(()=>{if(e===`edit-queue-item`&&i){let e=`queue`;i.scheduled_time&&!Fp(i.scheduled_time)&&(e=`scheduled`);let t=``;return i.scheduled_time&&!Fp(i.scheduled_time)&&(t=Qf(ep(i.scheduled_time)??new Date)),{scheduleType:e,scheduledTime:t,requireManualStart:i.manual_start,requirePreviousSuccess:i.require_previous_success,autoOffAfter:i.auto_off_after,gcodeInjection:i.gcode_injection??!1,staggerEnabled:!1,staggerGroupSize:WW.staggerGroupSize,staggerIntervalMinutes:WW.staggerIntervalMinutes}}return WW}),[z,B]=(0,y.useState)(()=>{if(e===`edit-queue-item`&&i?.ams_mapping&&Array.isArray(i.ams_mapping)){let e={};return i.ams_mapping.forEach((t,n)=>{t!==-1&&(e[n+1]=t)}),e}return{}}),[V,ee]=(0,y.useState)({}),[te,ne]=(0,y.useState)(()=>v||e===`edit-queue-item`&&i?.target_model?`model`:`printer`),[re,ie]=(0,y.useState)(()=>e===`edit-queue-item`&&i?.target_model?i.target_model:null),[ae,oe]=(0,y.useState)(()=>e===`edit-queue-item`&&i?.target_location?i.target_location:null),[se,H]=(0,y.useState)(()=>e===`edit-queue-item`?i?.cost_center_id??null:null),[ce,le]=(0,y.useState)(i?.estimated_cost??null),[ue,de]=(0,y.useState)({}),[fe,pe]=(0,y.useState)(()=>{if(e===`edit-queue-item`&&i?.filament_overrides){let e={};for(let t of i.filament_overrides)e[t.slot_id]={type:t.type,color:t.color};return e}return{}}),[me,he]=(0,y.useState)(()=>{if(e===`edit-queue-item`&&i?.filament_overrides){let e={};for(let t of i.filament_overrides)e[t.slot_id]=t.force_color_match===!0;return e}return{}}),[ge]=(0,y.useState)(()=>e===`edit-queue-item`&&i?.printer_id?[i.printer_id]:[]),[_e]=(0,y.useState)(()=>e===`edit-queue-item`&&i?i.plate_id:null),[ve,ye]=(0,y.useState)(!1),[be,xe]=(0,y.useState)({current:0,total:0}),[Se,Ce]=(0,y.useState)(null),[we,Te]=(0,y.useState)(new Set),Ee=E.length,De=E.length>0?E[0]:null,{data:Oe}=K({queryKey:[`settings`],queryFn:Z.getSettings}),ke=(0,y.useRef)(!1);(0,y.useEffect)(()=>{!Oe||ke.current||e===`edit-queue-item`||(ke.current=!0,I({bed_levelling:Oe.default_bed_levelling??UW.bed_levelling,flow_cali:Oe.default_flow_cali??UW.flow_cali,vibration_cali:Oe.default_vibration_cali??UW.vibration_cali,layer_inspect:Oe.default_layer_inspect??UW.layer_inspect,timelapse:Oe.default_timelapse??UW.timelapse,nozzle_offset_cali:Oe.default_nozzle_offset_cali??UW.nozzle_offset_cali,preheat_override:UW.preheat_override,preheat_chamber_target_override:UW.preheat_chamber_target_override}))},[Oe,e]);let Ae=(0,y.useRef)(!1);(0,y.useEffect)(()=>{!Oe||Ae.current||e===`edit-queue-item`||(Ae.current=!0,R(e=>({...e,staggerGroupSize:Oe.stagger_group_size??e.staggerGroupSize,staggerIntervalMinutes:Oe.stagger_interval_minutes??e.staggerIntervalMinutes})))},[Oe,e]);let je=Pf(Oe?.currency||`USD`),Me=Oe?.default_filament_cost??0,Ne=Oe?.billing_enabled===!0,{data:Pe,isLoading:Fe}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:Ie,isLoading:Le}=K({queryKey:[`finance`,`cost-centers`,`mine`],queryFn:Z.getMyCostCenters,enabled:!!h&&Ne}),Re=(0,y.useMemo)(()=>(Ie||[]).filter(e=>e.can_print&&e.is_active),[Ie]),ze=(0,y.useMemo)(()=>Re.find(e=>e.id===se)??null,[Re,se]);(0,y.useEffect)(()=>{Re.length!==0&&(se!=null&&Re.some(e=>e.id===se)||H(Re.find(e=>e.is_private)?.id??Re[0].id))},[Re,se]);let Be=Co({queries:E.map(e=>({queryKey:[`printer-inventory-remain`,e],queryFn:()=>Z.getInventoryRemain(e),staleTime:30*1e3,refetchOnMount:`always`,enabled:E.length>0}))}),Ve=(0,y.useMemo)(()=>{let e=new Map;return E.forEach((t,n)=>{let r=Be[n]?.data?.inventory_remain_g;if(!r)return;let i=new Map;Object.entries(r).forEach(([e,t])=>{let n=Number(e);Number.isNaN(n)||i.set(n,t)}),e.set(t,i)}),e},[E,Be]),He=(0,y.useMemo)(()=>{let e=new Map;return E.forEach((t,n)=>{let r=Be[n]?.data?.slot_materials;if(!r)return;let i=new Map;r.forEach(e=>i.set(e.global_tray_id,e)),e.set(t,i)}),e},[E,Be]),{data:Ue}=K({queryKey:[`archive`,t],queryFn:()=>Z.getArchive(t),enabled:!!t&&!g}),{data:We}=K({queryKey:[`library-file`,n],queryFn:()=>Z.getLibraryFile(n),enabled:g&&!!n}),Ge=Ue?.sliced_for_model||We?.sliced_for_model||null,Ke=(0,y.useMemo)(()=>g?void 0:OOe(Ue?.extra_data,De),[g,Ue?.extra_data,De]),{data:qe,isError:Je}=K({queryKey:[`archive-plates`,t],queryFn:()=>Z.getArchivePlates(t),enabled:!!t&&!g,retry:!1}),{data:Ye}=K({queryKey:[`library-file-plates`,n],queryFn:()=>Z.getLibraryFilePlates(n),enabled:g&&!!n}),Xe=g?Ye:qe,{data:Ze,isError:Qe}=K({queryKey:[`archive-filaments`,t,A],queryFn:()=>Z.getArchiveFilamentRequirements(t,A??void 0),enabled:!!t&&!g&&(A!==null||!Xe?.is_multi_plate),retry:!1}),{data:$e}=K({queryKey:[`library-file-filaments`,n,A],queryFn:()=>Z.getLibraryFileFilamentRequirements(n,A??void 0),enabled:g&&!!n&&(A!==null||!Xe?.is_multi_plate)}),et=!g&&(Je||Qe),tt=g?$e:Ze,nt=(0,y.useMemo)(()=>KW(tt,fe),[tt,fe]),{data:rt}=K({queryKey:[`available-filaments`,re,ae],queryFn:()=>Z.getAvailableFilaments(re,ae??void 0),enabled:te===`model`&&!!re}),it=(0,y.useMemo)(()=>Array.from(new Set(S.map(e=>e.sliced_for_model).filter(e=>!!e))),[S]),at=Co({queries:v?it.map(e=>({queryKey:[`available-filaments`,e,ae],queryFn:()=>Z.getAvailableFilaments(e,ae??void 0)})):[]}),ot=(0,y.useMemo)(()=>{let e=new Set,t=[];for(let n of at)for(let r of n.data??[]){let n=`${r.type}|${r.color}|${r.tray_info_idx}`;e.has(n)||(e.add(n),t.push(r))}return t},[at]),st=v?ot:rt,{data:ct,isLoading:lt}=K({queryKey:[`printer-status`,De],queryFn:()=>Z.getPrinterStatus(De),enabled:!!De}),ut=zp(Oe?.prefer_lowest_filament,ct?.ams_filament_backup),dt=async()=>{if(L.scheduleType!==`asap`||te!==`printer`||E.length===0)return!1;try{return(await Promise.all(E.map(e=>f.fetchQuery({queryKey:[`printer-status`,e],queryFn:()=>Z.getPrinterStatus(e),staleTime:0})))).some(e=>!vm(e))}catch{return!0}},{amsMapping:ft}=EW(nt,ct,z,ut,De?Ve.get(De):void 0),pt=(0,y.useMemo)(()=>[...O].sort((e,t)=>e-t),[O]),mt=O.size>1,ht=Co({queries:(mt?pt:[]).map(e=>({queryKey:g?[`library-file-filaments`,n,e]:[`archive-filaments`,t,e],queryFn:()=>g?Z.getLibraryFileFilamentRequirements(n,e):Z.getArchiveFilamentRequirements(t,e),enabled:g?!!n:!!t,retry:!1}))}),gt=ht.some(e=>e.isPending),_t=ht.some(e=>e.isError),vt=(0,y.useMemo)(()=>{let e=new Map;return pt.forEach((t,n)=>{let r=ht[n]?.data;r&&e.set(t,r)}),e},[pt,ht.map(e=>e.dataUpdatedAt).join(`|`)]),yt=(0,y.useMemo)(()=>{let e=new Map;for(let[t,n]of vt)e.set(t,KW(n,fe)??n);return e},[vt,fe]),[bt,xt]=(0,y.useState)({}),[St,Ct]=(0,y.useState)(()=>{if(e===`edit-queue-item`&&i?.nozzle_rack_choice){let e={};for(let[t,n]of Object.entries(i.nozzle_rack_choice)){let r=Number(t);Number.isInteger(r)&&Number.isInteger(n)&&(e[r]=n)}return e}return{}}),[wt,Tt]=(0,y.useState)({}),Et=(0,y.useMemo)(()=>{let e=new Map;if(!mt||!De||E.length!==1)return e;let t=xW(ct),n=ct?.fila_switch?.installed===!0,r=Ve.get(De);for(let i of pt){let a=yt.get(i);if(!a)continue;let o=wW(a,t,bt[i]??{},ut,r,n);e.set(i,TW(o))}return e},[mt,De,ct,Ve,pt,yt,bt,ut,E.length]),Dt=EOe(E,Pe,nt,z,V,ee,Oe?.prefer_lowest_filament,Ve);(0,y.useEffect)(()=>{Xe?.plates&&Xe.plates.length>=1&&O.size===0&&k(new Set([Xe.plates[0].index]))},[Xe,O.size]),(0,y.useEffect)(()=>{if(!v||!n)return;let e=w[n];e!=null&&k(t=>t.size===1&&t.has(e)?t:new Set([e]))},[v,n,w]),(0,y.useEffect)(()=>{if(e===`edit-queue-item`)return;let t=Pe?.filter(e=>e.is_active)||[];t.length===1&&E.length===0&&D([t[0].id])},[e,Pe,E.length]),(0,y.useEffect)(()=>{e===`edit-queue-item`?(JSON.stringify(E.sort())!==JSON.stringify(ge.sort())||A!==_e)&&(B({}),xt({}),ee({}),Te(new Set)):(B({}),xt({}),ee({}),Te(new Set))},[e,E,A,ge,_e]);let[Ot,kt]=(0,y.useState)(re),[At,jt]=(0,y.useState)(A);(0,y.useEffect)(()=>{let t=re!==null&&re!==Ot,n=A!==At;!t&&!n||(t&&kt(re),n&&jt(A),!(t&&!n&&Ot===null)&&(e!==`edit-queue-item`||Ot!==null)&&(pe({}),he({})))},[re,A,Ot,At,e]),(0,y.useEffect)(()=>{te!==`model`||re||!Ge||Pe?.some(e=>e.is_active&&e.model===Ge)&&ie(Ge)},[te,re,Ge,Pe]),(0,y.useEffect)(()=>{if(!Oe?.per_printer_mapping_expanded||E.length<=1)return;let e=E.filter(e=>{if(we.has(e))return!1;let t=Dt.printerResults.find(t=>t.printerId===e);return t&&t.status&&!t.isLoading});e.length>0&&(Te(t=>{let n=new Set(t);return e.forEach(e=>n.add(e)),n}),e.forEach(e=>{Dt.autoConfigurePrinter(e)}))},[Oe?.per_printer_mapping_expanded,E,we,Dt]),(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&!ve&&o()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[o,ve]);let Mt=Xe?.is_multi_plate??!1,Nt=Xe?.plates??[],Pt=(0,y.useMemo)(()=>{if(!Se||Se.length===0)return``;let e=Se.map(e=>e.pooled?d(`printModal.insufficientFilamentLinePooled`,{printer:e.printerName,slot:e.slotLabel,required:Math.round(e.requiredGrams),remaining:Math.round(e.remainingGrams)}):d(`printModal.insufficientFilamentLine`,{printer:e.printerName,slot:e.slotLabel,required:Math.round(e.requiredGrams),remaining:Math.round(e.remainingGrams)}));return[d(`printModal.insufficientFilamentMessage`),...e].join(`
+`)},[Se,d]),Ft=q({mutationFn:e=>Z.addToQueue(e)}),It=q({mutationFn:e=>Z.updateQueueItem(i.id,e),onSuccess:()=>{f.invalidateQueries({queryKey:[`queue`]}),p(`Queue item updated`),s?.(),o()},onError:e=>{p(e.message||`Failed to update queue item`,`error`)}}),Lt=(e,t)=>{if(mt)return t===null||E.length!==1?void 0:Et.get(t);if(E.length>1){let t=V[e];if(t&&!t.useDefault)return Dt.getFinalMapping(e)}return ft},Rt=async(a,u)=>{if(a?.preventDefault(),Ne&&ze==null){p(d(`printModal.noPrintableCostCenters`),`error`);return}if(!u?.skipFilamentCheck&&!Oe?.disable_filament_warnings&&!_&&te===`printer`){let e=[],t=mt?pt.map(e=>({plateId:e,reqs:vt.get(e)?.filaments??[]})):[{plateId:A,reqs:tt?.filaments??[]}];if(t.some(e=>e.reqs.length>0)&&He.size>0)for(let n of E){let r=E.length>1?Dt.printerResults.find(e=>e.printerId===n)?.status:ct,i=xW(r),a=new Map(i.map(e=>[e.globalTrayId,e.label])),o=He.get(n),s=Pe?.find(e=>e.id===n)?.name??`Printer ${n}`;if(!o||o.size===0)continue;let c=new Map;for(let e of t){let t=Lt(n,e.plateId);t&&e.reqs.forEach(e=>{if(!e.slot_id||e.slot_id<=0)return;let n=t[e.slot_id-1];!Number.isFinite(n)||n<0||c.set(n,(c.get(n)??0)+e.used_grams)})}let l=r?.ams_filament_backup===!0,u=e=>`${e.material_key}#${e.extruder}`,d=new Map,f=new Map,p=new Map;if(l){o.forEach(e=>{let t=u(e);d.set(t,(d.get(t)??0)+e.remaining_g),f.set(t,(f.get(t)??0)+1)});for(let[e,t]of c){let n=o.get(e);if(!n)continue;let r=u(n);p.set(r,(p.get(r)??0)+t)}}for(let[t,n]of c){let r=o.get(t);if(!r)continue;let i=a.get(t)??`Tray ${t}`;if(l){let t=u(r),n=d.get(t)??0,a=p.get(t)??0;if(n>=a)continue;e.push({printerName:s,slotLabel:i,requiredGrams:a,remainingGrams:n,pooled:(f.get(t)??1)>1});continue}r.remaining_g>=n||e.push({printerName:s,slotLabel:i,requiredGrams:n,remainingGrams:r.remaining_g})}}if(e.length>0){Ce(e);return}}if(te===`printer`&&E.length===0){p(`Please select at least one printer`,`error`);return}if(!v&&te===`model`&&!re){p(`Please select a target printer model`,`error`);return}if(!v&&te===`model`&&!gm(Ge,re)){p(`File was sliced for ${Ge} and cannot be dispatched to ${re} printers`,`error`);return}ye(!0);let m=O.size>1?Nt.filter(e=>O.has(e.index)):[null],h=te===`model`?m.length:E.length*m.length;xe({current:0,total:h});let y={success:0,failed:0,errors:[]},b=new Map((e===`edit-queue-item`?i?.filament_overrides??[]:[]).map(e=>[e.slot_id,e])),x=(e,t,n)=>{let r=b.get(e);return r?.tray_info_idx&&GW(r,{type:t,color:n})?{tray_info_idx:r.tray_info_idx}:{}},C=e=>{let t=[];if(e?.filaments)for(let n of e.filaments){let e=fe[n.slot_id],r=me[n.slot_id]??!1,i=e?.type??n.type,a=e?.color??n.color;(e||r)&&t.push({slot_id:n.slot_id,type:i,color:a,color_name:Tf(a),...x(n.slot_id,i,a),force_color_match:r})}else for(let[e,{type:n,color:r}]of Object.entries(fe)){let i=parseInt(e,10),a=me[i]??!1;t.push({slot_id:i,type:n,color:r,color_name:Tf(r),...x(i,n,r),force_color_match:a})}return t.length>0?t:void 0},T=C(tt),D=e=>mt&&e!==null?C(vt.get(e)):T,k=e=>{let t=D(e)?.filter(e=>fe[e.slot_id]);return t&&t.length>0?t:void 0};if(v){try{await Z.addToQueue({variants:S.map(e=>({library_file_id:e.id,plate_id:w[e.id]??null,filament_overrides:T})),target_location:ae,require_previous_success:L.requirePreviousSuccess,auto_off_after:L.autoOffAfter,gcode_injection:L.gcodeInjection,manual_start:L.scheduleType===`queue`&&L.requireManualStart,scheduled_time:L.scheduleType===`scheduled`&&L.scheduledTime?new Date(L.scheduledTime).toISOString():void 0,quantity:j,...F,project_id:c??void 0}),p(d(`printModal.variants.queued`,{count:S.length}),`success`),f.invalidateQueries({queryKey:[`queue`]}),s?.(),o()}catch(e){p(e instanceof Error?e.message:String(e),`error`)}finally{ye(!1)}return}let M=m.map((e,t)=>{let n=e?e.index:A;return{plate_id:n,plate_name:e&&e.name||null,quantity_target:Ut(n),sort_order:t}}),N=M.reduce((e,t)=>e+t.quantity_target,0),P=e===`create`&&(m.length>1||N>1)&&(te===`model`||E.length===1),I=null;if(P)try{let e=(r||``).replace(/\.gcode\.3mf$/i,``).replace(/\.3mf$/i,``),i=m.length>1?`${e||`Batch`} · ${m.length} plates`:`${e||`Batch`} ×${N}`;I=(await Z.createBatch({name:i,archive_id:g?void 0:t,library_file_id:g?n:void 0,plates:M})).id}catch{I=null}let R=new Map,z=(e,t,n=1)=>{if(L.scheduleType!==`asap`)return;let r=t===null?`unassigned`:`printer:${t}`,i=(R.get(r)??0)+1;e.insert_at_top=!0,e.insert_position=i,R.set(r,i+n-1)},B=e=>{let t=e!=null&&mt?wt[e]:St;return t&&Object.keys(t).length>0?t:void 0},V=(e,r)=>{let i=r===void 0?A:r,a=i!=null&&mt?ue[i]??null:ce;return{printer_id:te===`printer`?e:null,target_model:te===`model`?re:null,target_location:te===`model`?ae:null,filament_overrides:te===`model`?D(i):k(i),archive_id:g?void 0:t,library_file_id:g?n:void 0,require_previous_success:L.requirePreviousSuccess,auto_off_after:L.autoOffAfter,gcode_injection:L.gcodeInjection,manual_start:L.scheduleType===`queue`&&L.requireManualStart,skip_filament_check:u?.skipFilamentCheck===!0?!0:void 0,ams_mapping:e?Lt(e,i):void 0,nozzle_rack_choice:e?B(i):void 0,plate_id:i,scheduled_time:L.scheduleType===`scheduled`&&L.scheduledTime?new Date(L.scheduledTime).toISOString():void 0,...F,project_id:c??void 0,cost_center_id:Ne?se:void 0,estimated_cost:Ne&&se!=null?a:void 0,batch_id:I??void 0,cleanup_library_after_dispatch:l}};if(te===`model`){let t=0;for(let n of m){t++,xe({current:t,total:h});let r=n?n.index:A;try{if(e===`edit-queue-item`&&!n){let e={printer_id:null,target_model:re,target_location:ae,filament_overrides:T||null,require_previous_success:L.requirePreviousSuccess,auto_off_after:L.autoOffAfter,gcode_injection:L.gcodeInjection,manual_start:L.scheduleType===`queue`&&L.requireManualStart,ams_mapping:void 0,plate_id:r,scheduled_time:L.scheduleType===`scheduled`&&L.scheduledTime?new Date(L.scheduledTime).toISOString():null,...F,cost_center_id:Ne?se:void 0,estimated_cost:Ne&&se!=null?ce:void 0};await It.mutateAsync(e)}else{let e=V(null,r),t=Ut(r);t>1&&(e.quantity=t),z(e,null,t),await Ft.mutateAsync(e)}y.success++}catch(e){y.failed++;let t=n?n.name||`Plate ${n.index}`:``;y.errors.push(t?`${t}: ${e.message}`:e.message)}}}else{let e=L.staggerEnabled&&!_&&E.length>1,t=e?L.scheduleType===`scheduled`&&L.scheduledTime?new Date(L.scheduledTime).getTime():Date.now():0,n=0;for(let r of m){let i=r?r.index:A;for(let a=0;a<E.length;a++){let o=E[a];n++,xe({current:n,total:h});try{if(_&&n===1){let e=Lt(o,i),t={printer_id:o,target_model:null,target_location:null,filament_overrides:k(i)??null,require_previous_success:L.requirePreviousSuccess,auto_off_after:L.autoOffAfter,gcode_injection:L.gcodeInjection,manual_start:L.scheduleType===`queue`&&L.requireManualStart,ams_mapping:e,nozzle_rack_choice:B(i)??null,plate_id:i,scheduled_time:L.scheduleType===`scheduled`&&L.scheduledTime?new Date(L.scheduledTime).toISOString():null,...F,cost_center_id:Ne?se:void 0,estimated_cost:Ne&&se!=null?i!=null&&mt?ue[i]??null:ce:void 0};await It.mutateAsync(t)}else{let n=V(o,i),r=Ut(i);if(r>1&&(n.quantity=r),z(n,o,r),e){let e=Math.floor(a/L.staggerGroupSize);if(e>0){let r=e*L.staggerIntervalMinutes*6e4;n.scheduled_time=new Date(t+r).toISOString()}}await Ft.mutateAsync(n)}y.success++}catch(e){y.failed++;let t=Pe?.find(e=>e.id===o)?.name||`Printer ${o}`,n=r?r.name||`Plate ${r.index}`:``,i=n?`${t} (${n})`:t;y.errors.push(`${i}: ${e.message}`)}}}}ye(!1),y.failed===0?(_?e===`edit-queue-item`&&p(`Queue item updated`):y.success===1?p(await dt()?d(`queue.printQueuedWillStartWhenIdle`):te===`model`?`Queued for any ${re}`:d(`queue.printQueued`)):p(await dt()?d(`queue.printQueuedWillStartWhenIdle`):d(`queue.itemsQueued`,{count:y.success})),f.invalidateQueries({queryKey:[`queue`]}),s?.(),o()):y.success===0?p(`Failed: ${y.errors[0]}`,`error`):(p(`${y.success} succeeded, ${y.failed} failed`,`error`),f.invalidateQueries({queryKey:[`queue`]}))},zt=ve||It.isPending,Bt=(0,y.useMemo)(()=>!(zt||Ne&&(Le||ze==null)||te===`printer`&&E.length===0||!v&&te===`model`&&!re||!v&&te===`model`&&!gm(Ge,re)||Mt&&O.size===0||gt||_t||te===`printer`&&E.length===1&&lt),[E.length,te,re,Ge,Mt,O.size,zt,gt,_t,lt,v,Ne,Le,ze]),Vt=te===`printer`&&E.length>1?1:j,Ht=e===`create`&&!v&&Mt&&Nt.length>1,Ut=e=>!Ht||e==null?Vt:te===`printer`&&E.length>1?1:Math.max(1,N[e]??1);(0,y.useEffect)(()=>{e===`create`&&L.gcodeInjection&&!Oe?.gcode_snippets&&R(e=>({...e,gcodeInjection:!1}))},[e,Oe?.gcode_snippets,L.gcodeInjection]);let Wt=_?{title:d(`queue.editQueueItem`),icon:kl,submitText:d(`common.save`),submitIcon:kl,loadingText:be.total>1?d(`queue.savingProgress`,{current:be.current,total:be.total}):d(`common.saving`)}:{title:d(`common.print`),icon:Ll,submitText:d(`common.print`),submitIcon:Ll,loadingText:be.total>1?d(`queue.addingProgress`,{current:be.current,total:be.total}):d(`queue.adding`)},Gt=Wt.icon,Kt=Wt.submitIcon,qt=De&&O.size<=1&&(g||(Mt?A!==null:!0));(0,y.useEffect)(()=>{(!qt||et||E.length!==1)&&le(null)},[et,E.length,qt]);let Jt=!!De&&mt&&E.length===1,Yt=te===`model`&&(v||!!re)&&!!st&&st.length>0,Xt=(0,y.useMemo)(()=>new Set([`H2D`,`H2DPRO`,`H2C`,`X2D`]),[]),Zt=(0,y.useMemo)(()=>te===`model`?re?Xt.has(re.toUpperCase().replace(/[\s-]/g,``)):!1:!Pe||E.length===0?!1:E.some(e=>Pe.find(t=>t.id===e)?.nozzle_count===2),[te,re,Pe,E,Xt]);return(0,G.jsxs)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:ve?void 0:o,children:[(0,G.jsx)(Ld,{className:`w-full max-w-4xl max-h-[90vh] overflow-y-auto`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(zd,{className:`p-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Gt,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:Wt.title})]}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:o,disabled:ve,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`form`,{onSubmit:Rt,className:`p-4 space-y-4`,children:[(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[(0,G.jsx)(`span`,{className:`block text-bambu-gray mb-1`,children:`Print Job`}),(0,G.jsx)(`span`,{className:`text-white font-medium truncate block`,children:r})]}),(()=>{if(!Nt.length)return null;let e=kW((A==null?Nt[0]:Nt.find(e=>e.index===A))?.bed_type);return e?(0,G.jsxs)(`p`,{className:`flex items-center gap-1.5 text-xs text-bambu-gray -mt-2`,title:e.label,children:[(0,G.jsx)(`img`,{src:e.icon,alt:``,className:`w-4 h-4 object-contain flex-shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,children:e.label})]}):null})(),!v&&(0,G.jsx)(POe,{plates:Nt,isMultiPlate:Mt,selectedPlates:O,onToggle:e=>{k(t=>{let n=new Set(t);return _?(n.clear(),n.add(e)):n.has(e)?n.delete(e):n.add(e),n})},onSelectAll:_?void 0:()=>k(new Set(Nt.map(e=>e.index))),onDeselectAll:_?void 0:()=>k(new Set),multiSelect:!_,quantities:Ht?N:void 0,onQuantityChange:Ht?(e,t)=>P(n=>({...n,[e]:t})):void 0}),v&&(0,G.jsx)(HW,{candidates:S,onReorder:C,plateByFile:w,onPlateChange:(e,t)=>T(n=>({...n,[e]:t}))}),x&&(0,G.jsx)(HW,{candidates:b,readOnly:!0,readOnlyNote:d(`printModal.variants.editNote`),onReorder:()=>{},plateByFile:{},onPlateChange:()=>{}}),!v&&!x&&!a?.length&&(0,G.jsx)(LOe,{printers:Pe||[],selectedPrinterIds:E,onMultiSelect:D,isLoading:Fe,allowMultiple:!0,showInactive:e===`edit-queue-item`,disableBusy:!1,printerMappingResults:Dt.printerResults,filamentReqs:mt?void 0:nt,onAutoConfigurePrinter:Dt.autoConfigurePrinter,onUpdatePrinterConfig:Dt.updatePrinterConfig,assignmentMode:te,onAssignmentModeChange:ne,targetModel:re,onTargetModelChange:ie,targetLocation:ae,onTargetLocationChange:oe,slicedForModel:Ge}),Yt&&!mt&&tt&&(0,G.jsx)(zW,{filamentReqs:tt,availableFilaments:st,overrides:fe,onChange:pe,forceColorMatch:me,onForceColorMatchChange:(e,t)=>he(n=>({...n,[e]:t}))}),Yt&&mt&&pt.map((e,t)=>{let n=Nt.find(t=>t.index===e),r=vt.get(e);return r?(0,G.jsx)(zW,{plateLabel:n?.name||d(`printModal.plateN`,`Plate {{n}}`,{n:e}),showHint:t===0,filamentReqs:r,availableFilaments:rt,overrides:fe,onChange:pe,forceColorMatch:me,onForceColorMatchChange:(e,t)=>he(n=>({...n,[e]:t}))},e):null}),Ge&&te===`printer`&&E.length===1&&(()=>{let e=Pe?.find(e=>e.id===E[0]);return e&&e.model&&Ge!==e.model?(0,G.jsxs)(`div`,{className:`p-3 mb-2 bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30 rounded-lg flex items-center gap-2`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-600 dark:text-yellow-400 flex-shrink-0`}),(0,G.jsxs)(`span`,{className:`text-sm text-yellow-700 dark:text-yellow-400`,children:[`File was sliced for `,Ge,`, but printing on `,e.model]})]}):null})(),et&&(0,G.jsxs)(`div`,{className:`flex items-start gap-2 p-3 mb-2 bg-orange-50 dark:bg-orange-500/10 border border-orange-300 dark:border-orange-500/30 rounded-lg text-sm`,children:[(0,G.jsx)(ys,{className:`w-4 h-4 text-orange-600 dark:text-orange-400 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`p`,{className:`text-orange-700 dark:text-orange-400`,children:`Archive data unavailable. The source file may have been deleted. Filament mapping is disabled.`})]}),_t&&(0,G.jsxs)(`div`,{className:`flex items-start gap-2 p-3 mb-2 bg-orange-50 dark:bg-orange-500/10 border border-orange-300 dark:border-orange-500/30 rounded-lg text-sm`,children:[(0,G.jsx)(ys,{className:`w-4 h-4 text-orange-600 dark:text-orange-400 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`p`,{className:`text-orange-700 dark:text-orange-400`,children:d(`printModal.plateFilamentsUnreadable`,`The filaments of a selected plate could not be read, so it can't be mapped. Deselect it to queue the others.`)})]}),qt&&!et&&E.length===1&&(0,G.jsx)(RW,{printerId:De,filamentReqs:nt,manualMappings:z,onManualMappingChange:B,onEstimatedCostChange:le,budgetAvailable:Ne?ze?.budget_available??null:null,quantity:Vt,defaultExpanded:!!a?.length||(Oe?.per_printer_mapping_expanded??!1),currencySymbol:je,defaultCostPerKg:Me,forceColorMatch:me,onForceColorMatchChange:(e,t)=>he(n=>({...n,[e]:t})),archiveAmsMapping:Ke,nozzleRackChoice:St,onNozzleRackChoiceChange:Ct}),Jt&&!et&&pt.map(e=>{let t=Nt.find(t=>t.index===e),n=yt.get(e);return n?(0,G.jsx)(RW,{printerId:De,plateLabel:t?.name||d(`printModal.plateN`,`Plate {{n}}`,{n:e}),filamentReqs:n,manualMappings:bt[e]??{},onManualMappingChange:t=>xt(n=>({...n,[e]:t})),onEstimatedCostChange:t=>de(n=>({...n,[e]:t})),budgetAvailable:Ne?ze?.budget_available??null:null,quantity:Ut(e),defaultExpanded:!1,currencySymbol:je,defaultCostPerKg:Me,forceColorMatch:me,onForceColorMatchChange:(e,t)=>he(n=>({...n,[e]:t})),archiveAmsMapping:Ke,nozzleRackChoice:wt[e]??{},onNozzleRackChoiceChange:t=>Tt(n=>({...n,[e]:t}))},e):null}),(e===`create`||Ee>0||te===`model`&&re)&&(0,G.jsx)(zOe,{options:F,onChange:I,defaultExpanded:!!a?.length,showDualNozzleOptions:Zt}),Ne&&Re.length>0&&(0,G.jsx)(VOe,{costCenters:Re,selectedCostCenterId:se,onChange:H}),Ne&&!Le&&Re.length===0&&(0,G.jsxs)(`div`,{role:`alert`,className:`p-3 bg-yellow-100 dark:bg-yellow-500/20 border border-yellow-500/50 rounded-lg text-sm text-yellow-800 dark:text-yellow-300 flex items-start gap-2`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 mt-0.5 shrink-0`}),d(`printModal.noPrintableCostCenters`)]}),e!==`edit-queue-item`&&!Ht&&(te===`model`||E.length<=1)&&(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`label`,{htmlFor:`printQuantity`,className:`text-sm text-bambu-gray whitespace-nowrap`,children:d(`queue.quantity`,`Quantity`)}),(0,G.jsx)(`input`,{id:`printQuantity`,type:`number`,min:1,max:999,value:j,onChange:e=>M(Math.max(1,Math.min(999,parseInt(e.target.value)||1))),className:`w-20 px-2 py-1 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded text-white focus:outline-none focus:ring-1 focus:ring-bambu-green`}),j>1&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:d(`queue.quantityHint`,`Creates {{count}} queue items`,{count:j})})]}),(0,G.jsx)(BOe,{options:L,onChange:R,dateFormat:Oe?.date_format||`system`,timeFormat:Oe?.time_format||`system`,canControlPrinter:m(`printers:control`),showStagger:!_&&te===`printer`&&E.length>1,printerCount:E.length,hasGcodeSnippets:!!Oe?.gcode_snippets}),It.isError&&(0,G.jsx)(`div`,{className:`mb-4 p-3 bg-red-100 dark:bg-red-500/20 border border-red-500/50 rounded-lg text-sm text-red-700 dark:text-red-400`,children:It.error?.message||`Failed to complete operation`}),te===`printer`&&E.length===1&&lt&&(0,G.jsxs)(`div`,{className:`mb-4 p-3 bg-blue-100 dark:bg-blue-500/20 border border-blue-500/50 rounded-lg text-sm text-blue-700 dark:text-blue-400 flex items-center gap-2`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),d(`printModal.waitingForAmsStatus`,{printer:Pe?.find(e=>e.id===De)?.name??``})]}),(0,G.jsxs)(`div`,{className:`flex gap-3 pt-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:o,className:`flex-1`,disabled:ve,children:`Cancel`}),(0,G.jsx)(Q,{type:`submit`,disabled:!Bt,className:`flex-1`,children:zt?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),Wt.loadingText]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Kt,{className:`w-4 h-4`}),Wt.submitText]})})]})]})]})}),Se&&Se.length>0&&(0,G.jsx)(rf,{title:d(`printModal.insufficientFilamentTitle`),message:Pt,confirmText:d(`printModal.printAnyway`),cancelText:d(`common.cancel`),variant:`warning`,onConfirm:()=>{Ce(null),Rt(void 0,{skipFilamentCheck:!0})},onCancel:()=>Ce(null)})]})}function JW({value:e,titleKey:t=`printers.copyToClipboard`,copiedTitleKey:n=`printers.copied`,className:r=`ml-2 p-1 rounded hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white transition-colors`,iconClassName:i=`w-3.5 h-3.5`}){let{t:a}=U(),[o,s]=(0,y.useState)(!1);return(0,G.jsx)(`button`,{onClick:async()=>{try{if(navigator.clipboard&&window.isSecureContext)await navigator.clipboard.writeText(e);else{let t=document.createElement(`textarea`);t.value=e,t.style.position=`fixed`,t.style.opacity=`0`,document.body.appendChild(t);try{if(t.select(),!document.execCommand(`copy`))return}finally{document.body.removeChild(t)}}s(!0),setTimeout(()=>s(!1),2e3)}catch{}},className:r,title:a(o?n:t),children:o?(0,G.jsx)(fs,{className:`${i} text-bambu-green`}):(0,G.jsx)(Vs,{className:i})})}function HOe({printer:e,status:t,totalPrintHours:n,onClose:r}){let{t:i}=U();(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&r()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[r]);let a=[];if(a.push({label:i(`printers.model`),value:e.model??`—`}),a.push({label:i(`common.status`),value:(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1.5 px-2 py-0.5 rounded-full text-xs font-medium ${t?.connected?`bg-bambu-green/20 text-bambu-green`:`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`}`,children:[(0,G.jsx)(`span`,{className:`w-1.5 h-1.5 rounded-full ${t?.connected?`bg-bambu-green`:`bg-red-400`}`}),t?.connected?i(`printers.status.available`):i(`printers.status.offline`)]})}),t?.state&&a.push({label:i(`printers.state`),value:i({IDLE:`printers.status.idle`,RUNNING:`printers.status.printing`,PAUSE:`printers.status.paused`,FINISH:`printers.status.finished`,FAILED:`printers.status.error`}[t.state]??`printers.status.unknown`)}),a.push({label:i(`printers.ipAddress`),value:(0,G.jsxs)(`span`,{className:`flex items-center`,children:[(0,G.jsx)(`span`,{className:`font-mono`,children:e.ip_address}),(0,G.jsx)(JW,{value:e.ip_address})]})}),a.push({label:i(`printers.serialNumber`),value:(0,G.jsxs)(`span`,{className:`flex items-center`,children:[(0,G.jsx)(`span`,{className:`font-mono truncate`,children:e.serial_number}),(0,G.jsx)(JW,{value:e.serial_number})]})}),t?.wired_network)a.push({label:i(`printers.networkLabel`,`Network`),value:(0,G.jsxs)(`span`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(ts,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsx)(`span`,{className:`text-bambu-green`,children:i(`printers.connection.ethernet`,`Ethernet`)})]})});else if(t?.wifi_signal!=null){let e=_m(t.wifi_signal);a.push({label:i(`printers.wifiSignalLabel`),value:(0,G.jsxs)(`span`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(cu,{className:`w-4 h-4 ${e.color}`}),(0,G.jsx)(`span`,{className:e.color,children:i(e.labelKey)}),(0,G.jsxs)(`span`,{className:`text-bambu-gray text-xs`,children:[`(`,t.wifi_signal,` dBm)`]})]})})}return a.push({label:i(`printers.firmware`),value:t?.firmware_version??`—`}),t?.developer_mode!=null&&a.push({label:i(`printers.developerMode`),value:(0,G.jsx)(`span`,{className:`inline-flex items-center px-2 py-0.5 rounded-full text-xs font-medium ${t.developer_mode?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:t.developer_mode?i(`printers.enabled`):i(`printers.disabled`)})}),a.push({label:i(`printers.nozzleCount`),value:e.nozzle_count}),a.push({label:i(`printers.autoArchive`),value:(0,G.jsx)(`span`,{className:`inline-flex items-center px-2 py-0.5 rounded-full text-xs font-medium ${e.auto_archive?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:e.auto_archive?i(`printers.enabled`):i(`printers.disabled`)})}),n!=null&&n>0&&a.push({label:i(`printers.totalPrintHours`),value:`${Math.round(n)}h`}),e.location&&a.push({label:i(`printers.sort.location`),value:e.location}),a.push({label:i(`printers.addedOn`),value:np(e.created_at)}),(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,role:`dialog`,"aria-modal":`true`,onClick:r,children:(0,G.jsx)(Ld,{className:`w-full max-w-md`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(zd,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-4`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e.name}),(0,G.jsx)(`button`,{onClick:r,className:`p-1 hover:bg-bambu-dark rounded flex-shrink-0`,children:(0,G.jsx)(td,{className:`w-5 h-5 text-bambu-gray`})})]}),(0,G.jsx)(`div`,{className:`flex justify-center mb-4`,children:(0,G.jsx)(`img`,{src:hm(e.model),alt:e.model??e.name,className:`h-24 object-contain`})}),(0,G.jsx)(`div`,{className:`space-y-0`,children:a.map((e,t)=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-4 py-2.5 border-b border-bambu-dark-tertiary last:border-0`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray whitespace-nowrap`,children:e.label}),(0,G.jsx)(`span`,{className:`text-sm text-white text-right`,children:e.value})]},t))})]})})})}var YW=0,XW=1;function UOe({slotLabel:e,amsId:t,slotId:n,extruderSlots:r,isLoading:i=!1,onConfirm:a,onCancel:o}){let{t:s}=U(),[c,l]=(0,y.useState)(null);(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&!i&&o()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[o,i]);let u=e=>{let i=r[String(e)];return i?.ams_id===t&&i?.slot_id===n},d=[{extruderId:XW,label:s(`printers.ams.feedLeft`),taken:u(XW)},{extruderId:YW,label:s(`printers.ams.feedRight`),taken:u(YW)}],f=d.some(e=>e.extruderId===c&&e.taken);return(0,y.useEffect)(()=>{f&&l(null)},[f]),(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center p-4 z-50`,onClick:i?void 0:o,children:(0,G.jsx)(Ld,{className:`w-full max-w-md`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(zd,{className:`p-6`,children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white mb-2`,children:s(`printers.ams.feedTitle`,{slot:e})}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm`,children:s(`printers.ams.feedPrompt`)}),(0,G.jsx)(`div`,{className:`grid grid-cols-2 gap-3 mt-4`,children:d.map(({extruderId:e,label:t,taken:n})=>{let r=c===e;return(0,G.jsxs)(`button`,{type:`button`,onClick:()=>l(e),disabled:n||i,title:n?s(`printers.ams.feedAlreadyLoaded`):void 0,className:`p-3 rounded-lg border text-sm transition-colors ${n?`border-transparent bg-bambu-dark text-bambu-gray/50 cursor-not-allowed`:r?`border-bambu-green/50 bg-bambu-green/10 text-white`:`border-transparent bg-bambu-dark text-white hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(`div`,{className:`font-medium`,children:t}),n&&(0,G.jsx)(`div`,{className:`text-xs mt-1`,children:s(`printers.ams.feedAlreadyLoaded`)})]},e)})}),(0,G.jsxs)(`div`,{className:`flex gap-3 mt-6`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:o,className:`flex-1`,disabled:i,children:s(`common.cancel`)}),(0,G.jsx)(Q,{onClick:()=>c!==null&&a(c),className:`flex-1`,disabled:c===null||i,children:i?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 mr-2 animate-spin`}),s(`common.loading`)]}):s(`common.confirm`)})]})]})})})}function WOe(e){if(!e||e.length<6)return!1;let t=parseInt(e.slice(0,2),16),n=parseInt(e.slice(2,4),16),r=parseInt(e.slice(4,6),16);return(.299*t+.587*n+.114*r)/255>.6}function ZW({trayColor:e,trayType:t,isEmpty:n,emptyKind:r,slotNumber:i}){let a=r===`reset`?`#3d3d3d`:`#666`;return(0,G.jsx)(`div`,{className:`w-3.5 h-3.5 rounded-full mx-auto mb-0.5 border-2 flex items-center justify-center`,style:{backgroundColor:e?`#${e}`:t?`#333`:`transparent`,borderColor:n?a:`rgba(255,255,255,0.1)`,borderStyle:n?`dashed`:`solid`},children:(0,G.jsx)(`span`,{className:`text-[6px] font-bold leading-none select-none`,style:{color:e&&WOe(e)?`#000`:`#fff`},children:i})})}var GOe=240,KOe=440,qOe=[30,60,120,240,480,720,1440],QW=[`scheduled-dryings`],JOe={ams_power_required:`printers.drying.powerRequired`,ams_retract_filament:`printers.drying.retractFilament`,ams_blocked:`printers.drying.cannotDryNow`,ams_not_found:`printers.drying.waitingAmsNotFound`,printer_offline:`printers.drying.waitingOffline`,printer_busy:`printers.drying.waitingPrinterBusy`,already_drying:`printers.drying.waitingAlreadyDrying`,interrupted:`printers.drying.waitingInterrupted`};function YOe(e){return e?JOe[e]:void 0}function XOe(e){let t=(e??[]).map(e=>Number(e));return t.some(e=>e===1||e===8)?`printers.drying.powerRequired`:t.includes(3)?`printers.drying.retractFilament`:`printers.drying.cannotDryNow`}var $W=[{value:`all`,labelKey:`printers.filter.allStatuses`},{value:`printing`,labelKey:`printers.status.printing`},{value:`paused`,labelKey:`printers.status.paused`},{value:`idle`,labelKey:`printers.status.idle`},{value:`finished`,labelKey:`printers.status.finished`},{value:`error`,labelKey:`printers.status.error`},{value:`offline`,labelKey:`printers.status.offline`}];function ZOe(e){return $W.some(t=>t.value===e)}function eG(e){return(e??.02).toFixed(3)}function tG({k:e,reserve:t}){let{t:n}=U(),r=`text-[length:var(--pc-t8,8px)] text-bambu-gray tabular-nums leading-none truncate`;return e?(0,G.jsxs)(`div`,{className:r,title:n(`ams.kFactor`),children:[n(`ams.kFactorShort`),` `,eG(e)]}):t?(0,G.jsx)(`div`,{className:r,"aria-hidden":`true`,children:`\xA0`}):null}function nG({side:e}){let{mode:t}=Pd(),{t:n}=U();return(0,G.jsx)(`span`,{className:`inline-flex items-center justify-center w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] text-[length:var(--pc-t10,10px)] font-bold rounded`,style:{backgroundColor:t===`dark`?`#1a4d2e`:`#e7f5e9`,color:`#00ae42`},title:n(e===`L`?`common.left`:`common.right`),children:e})}function rG({inlet:e,title:t}){let{mode:n}=Pd();return(0,G.jsx)(`span`,{className:`inline-flex items-center justify-center w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] text-[length:var(--pc-t10,10px)] font-bold rounded`,style:{backgroundColor:n===`dark`?`#1e3a5f`:`#e3f0fb`,color:`#3b82f6`},title:t,children:pp[e]})}function iG(e,t,n,r){let i=n[String(e)];if(i)return{kind:`inlet`,inlet:i};let a=t[String(e)],o=a===void 0?r?void 0:e>=128?e-128:e:a;return o===1?{kind:`nozzle`,side:`L`}:o===0?{kind:`nozzle`,side:`R`}:null}function aG(e,t){if(!e)return``;if(e.includes(`hardened`))return t(`printers.nozzleHardenedSteel`);if(e.includes(`stainless`))return t(`printers.nozzleStainlessSteel`);if(e.includes(`tungsten`))return t(`printers.nozzleTungstenCarbide`);if(e.length>=4){let n=e.slice(2,4);if(n===`00`)return t(`printers.nozzleStainlessSteel`);if(n===`01`)return t(`printers.nozzleHardenedSteel`);if(n===`05`)return t(`printers.nozzleTungstenCarbide`)}return e===`00`?t(`printers.nozzleStainlessSteel`):e===`01`?t(`printers.nozzleHardenedSteel`):e===`05`?t(`printers.nozzleTungstenCarbide`):e.startsWith(`H`)?t(`printers.nozzleHardenedSteel`):e}function oG(e,t){return e?e.startsWith(`HH`)?t(`printers.nozzleHighFlow`):e.startsWith(`HS`)?t(`printers.nozzleStandardFlow`):``:``}function sG({slot:e,index:t,activeStatus:n,filamentName:r,children:i}){let{t:a}=U(),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(`top`),u=(0,y.useRef)(null),d=(0,y.useRef)(null),f=(0,y.useRef)(null),p=!e.nozzle_diameter&&!e.nozzle_type,m=e.stat===1;(0,y.useEffect)(()=>{if(o&&u.current&&d.current){let e=u.current.getBoundingClientRect(),t=d.current.offsetHeight,n=e.top-56,r=window.innerHeight-e.bottom;n<t+12&&r>n?l(`bottom`):l(`top`)}},[o]);let h=()=>{f.current&&clearTimeout(f.current),f.current=setTimeout(()=>s(!0),80)},g=()=>{f.current&&clearTimeout(f.current),f.current=setTimeout(()=>s(!1),100)};(0,y.useEffect)(()=>()=>{f.current&&clearTimeout(f.current)},[]);let _=Af(e.filament_color),v=aG(e.nozzle_type,a),b=oG(e.nozzle_type,a);return(0,G.jsxs)(`div`,{ref:u,className:`relative`,onMouseEnter:h,onMouseLeave:g,children:[i,o&&(0,G.jsxs)(`div`,{ref:d,className:`
             absolute left-1/2 -translate-x-1/2 z-50
             ${c===`top`?`bottom-full mb-2`:`top-full mt-2`}
             animate-in fade-in-0 zoom-in-95 duration-150
@@ -4193,7 +4193,7 @@ void main() {
               border-l-[6px] border-l-transparent
               border-r-[6px] border-r-transparent
               ${c===`top`?`top-full border-t-[6px] border-t-bambu-dark-tertiary`:`bottom-full border-b-[6px] border-b-bambu-dark-tertiary`}
-            `})]})]})}function ZOe({leftSlot:e,rightSlot:t,activeNozzle:n,filamentInfo:r,children:i}){let{t:a}=U(),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(`top`),u=(0,y.useRef)(null),d=(0,y.useRef)(null),f=(0,y.useRef)(null);(0,y.useEffect)(()=>{if(o&&u.current&&d.current){let e=u.current.getBoundingClientRect(),t=d.current.offsetHeight,n=e.top-56,r=window.innerHeight-e.bottom;n<t+12&&r>n?l(`bottom`):l(`top`)}},[o]);let p=()=>{f.current&&clearTimeout(f.current),f.current=setTimeout(()=>s(!0),80)},m=()=>{f.current&&clearTimeout(f.current),f.current=setTimeout(()=>s(!1),100)};if((0,y.useEffect)(()=>()=>{f.current&&clearTimeout(f.current)},[]),!e&&!t)return(0,G.jsx)(G.Fragment,{children:i});let h=(e,t)=>{let i=n===t,o=nG(e.nozzle_type,a),s=rG(e.nozzle_type,a),c=Af(e.filament_color),l=e.filament_id?r?.[e.filament_id]?.name:void 0;return(0,G.jsxs)(`div`,{className:`flex-1 space-y-1.5`,children:[(0,G.jsx)(`div`,{className:`text-[length:var(--pc-t10,10px)] font-bold pb-1 border-b border-bambu-dark-tertiary/50 ${i?`text-amber-700 dark:text-amber-400`:`text-bambu-gray`}`,children:a(t===`L`?`common.left`:`common.right`)}),e.nozzle_diameter&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray`,children:a(`printers.nozzleDiameter`)}),(0,G.jsxs)(`span`,{className:`text-xs text-white font-semibold`,children:[e.nozzle_diameter,` mm`]})]}),o&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray`,children:a(`printers.nozzleType`)}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-white font-semibold`,children:o})]}),s&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray`,children:a(`printers.nozzleFlow`)}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-white font-semibold`,children:s})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray`,children:a(`printers.nozzleStatus`)}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] font-bold px-1.5 py-0.5 rounded ${i?`bg-green-900/50 text-green-400`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:a(i?`printers.nozzleActive`:`printers.nozzleIdle`)})]}),e.wear!=null&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray`,children:a(`printers.nozzleWear`)}),(0,G.jsxs)(`span`,{className:`text-xs text-white font-semibold`,children:[e.wear,`%`]})]}),t===`R`&&e.max_temp>0&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray`,children:a(`printers.nozzleMaxTemp`)}),(0,G.jsxs)(`span`,{className:`text-xs text-white font-semibold`,children:[e.max_temp,`°C`]})]}),t===`R`&&e.serial_number&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray`,children:a(`printers.nozzleSerial`)}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-white font-mono`,children:e.serial_number})]}),(c||e.filament_type||e.filament_id)&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray`,children:a(`printers.nozzleFilament`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[c&&(0,G.jsx)(`div`,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] rounded-sm border border-white/20`,style:{backgroundColor:c}}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-white font-semibold truncate max-w-[100px]`,children:l||e.filament_type||e.filament_id||``})]})]})]})};return(0,G.jsxs)(`div`,{ref:u,className:`relative flex-1`,onMouseEnter:p,onMouseLeave:m,children:[i,o&&(0,G.jsxs)(`div`,{ref:d,className:`
+            `})]})]})}function QOe({leftSlot:e,rightSlot:t,activeNozzle:n,filamentInfo:r,children:i}){let{t:a}=U(),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(`top`),u=(0,y.useRef)(null),d=(0,y.useRef)(null),f=(0,y.useRef)(null);(0,y.useEffect)(()=>{if(o&&u.current&&d.current){let e=u.current.getBoundingClientRect(),t=d.current.offsetHeight,n=e.top-56,r=window.innerHeight-e.bottom;n<t+12&&r>n?l(`bottom`):l(`top`)}},[o]);let p=()=>{f.current&&clearTimeout(f.current),f.current=setTimeout(()=>s(!0),80)},m=()=>{f.current&&clearTimeout(f.current),f.current=setTimeout(()=>s(!1),100)};if((0,y.useEffect)(()=>()=>{f.current&&clearTimeout(f.current)},[]),!e&&!t)return(0,G.jsx)(G.Fragment,{children:i});let h=(e,t)=>{let i=n===t,o=aG(e.nozzle_type,a),s=oG(e.nozzle_type,a),c=Af(e.filament_color),l=e.filament_id?r?.[e.filament_id]?.name:void 0;return(0,G.jsxs)(`div`,{className:`flex-1 space-y-1.5`,children:[(0,G.jsx)(`div`,{className:`text-[length:var(--pc-t10,10px)] font-bold pb-1 border-b border-bambu-dark-tertiary/50 ${i?`text-amber-700 dark:text-amber-400`:`text-bambu-gray`}`,children:a(t===`L`?`common.left`:`common.right`)}),e.nozzle_diameter&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray`,children:a(`printers.nozzleDiameter`)}),(0,G.jsxs)(`span`,{className:`text-xs text-white font-semibold`,children:[e.nozzle_diameter,` mm`]})]}),o&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray`,children:a(`printers.nozzleType`)}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-white font-semibold`,children:o})]}),s&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray`,children:a(`printers.nozzleFlow`)}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-white font-semibold`,children:s})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray`,children:a(`printers.nozzleStatus`)}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] font-bold px-1.5 py-0.5 rounded ${i?`bg-green-900/50 text-green-400`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:a(i?`printers.nozzleActive`:`printers.nozzleIdle`)})]}),e.wear!=null&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray`,children:a(`printers.nozzleWear`)}),(0,G.jsxs)(`span`,{className:`text-xs text-white font-semibold`,children:[e.wear,`%`]})]}),t===`R`&&e.max_temp>0&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray`,children:a(`printers.nozzleMaxTemp`)}),(0,G.jsxs)(`span`,{className:`text-xs text-white font-semibold`,children:[e.max_temp,`°C`]})]}),t===`R`&&e.serial_number&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray`,children:a(`printers.nozzleSerial`)}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-white font-mono`,children:e.serial_number})]}),(c||e.filament_type||e.filament_id)&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray`,children:a(`printers.nozzleFilament`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[c&&(0,G.jsx)(`div`,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] rounded-sm border border-white/20`,style:{backgroundColor:c}}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-white font-semibold truncate max-w-[100px]`,children:l||e.filament_type||e.filament_id||``})]})]})]})};return(0,G.jsxs)(`div`,{ref:u,className:`relative flex-1`,onMouseEnter:p,onMouseLeave:m,children:[i,o&&(0,G.jsxs)(`div`,{ref:d,className:`
             absolute left-1/2 -translate-x-1/2 z-50
             ${c===`top`?`bottom-full mb-2`:`top-full mt-2`}
             animate-in fade-in-0 zoom-in-95 duration-150
@@ -4202,38 +4202,38 @@ void main() {
               border-l-[6px] border-l-transparent
               border-r-[6px] border-r-transparent
               ${c===`top`?`top-full border-t-[6px] border-t-bambu-dark-tertiary`:`bottom-full border-b-[6px] border-b-bambu-dark-tertiary`}
-            `})]})]})}function QOe({slots:e,filamentInfo:t}){let{t:n}=U(),r=e.filter(e=>e.id>=2),i=Array.from({length:6},(e,t)=>r.find(e=>e.id===16+t)??{id:-(t+1),nozzle_type:``,nozzle_diameter:``,wear:null,stat:null,max_temp:0,serial_number:``,filament_color:``,filament_id:``,filament_type:``});return(0,G.jsxs)(`div`,{className:`text-center px-2.5 py-1.5 bg-bambu-dark rounded-lg flex-[0_1_auto] flex flex-col justify-center`,children:[(0,G.jsx)(`p`,{className:`text-[length:var(--pc-t9,9px)] text-bambu-gray mb-1`,children:n(`printers.nozzleRack`)}),(0,G.jsx)(`div`,{className:`flex gap-[3px] justify-center`,children:i.map((e,n)=>{let r=!e.nozzle_diameter&&!e.nozzle_type,i=r?null:Af(e.filament_color),a=i?jf(e.filament_color):!1;return(0,G.jsx)(iG,{slot:e,index:n,filamentName:e.filament_id?t?.[e.filament_id]?.name:void 0,children:(0,G.jsxs)(`div`,{className:`flex flex-col items-center gap-0.5`,children:[(0,G.jsx)(`div`,{className:`w-[var(--pc-i7,28px)] h-[var(--pc-i7,28px)] rounded flex items-center justify-center cursor-default transition-colors border-b-2 ${r?`bg-bambu-dark-tertiary/20 border-bambu-dark-tertiary/20`:`bg-bambu-dark-tertiary/40 border-bambu-dark-tertiary/40`}`,style:i?{backgroundColor:i}:void 0,children:(0,G.jsx)(`span`,{"data-rack-diameter":!0,className:`text-[length:var(--pc-t10,10px)] font-semibold ${r?`text-bambu-gray/30`:a?`text-black/80`:`text-white`}`,style:i&&!a?{textShadow:`0 1px 3px rgba(0,0,0,0.9)`}:void 0,children:r?`—`:e.nozzle_diameter||`?`})}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t8,8px)] leading-none tabular-nums text-bambu-gray/70`,children:n+1})]})},e.id>=0?e.id:`empty-${n}`)})})]})}function $Oe({className:e}){return(0,G.jsx)(`svg`,{className:e,viewBox:`0 0 36 54`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:(0,G.jsx)(`path`,{d:`M17.8131 0.00538C18.4463 -0.15091 20.3648 3.14642 20.8264 3.84781C25.4187 10.816 35.3089 26.9368 35.9383 34.8694C37.4182 53.5822 11.882 61.3357 2.53721 45.3789C-1.73471 38.0791 0.016 32.2049 3.178 25.0232C6.99221 16.3662 12.6411 7.90372 17.8131 0.00538ZM18.3738 7.24807L17.5881 7.48441C14.4452 12.9431 10.917 18.2341 8.19369 23.9368C4.6808 31.29 1.18317 38.5479 7.69403 45.5657C17.3058 55.9228 34.9847 46.8808 31.4604 32.8681C29.2558 24.0969 22.4207 15.2913 18.3776 7.24807H18.3738Z`,fill:`#C3C2C1`})})}function eke({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 35 53`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`path`,{d:`M17.3165 0.0038C17.932 -0.14959 19.7971 3.08645 20.2458 3.77481C24.7103 10.6135 34.3251 26.4346 34.937 34.2198C36.3757 52.5848 11.5505 60.1942 2.46584 44.534C-1.68714 37.3735 0.0148 31.6085 3.08879 24.5603C6.79681 16.0605 12.2884 7.75907 17.3165 0.0038ZM17.8615 7.11561L17.0977 7.34755C14.0423 12.7048 10.6124 17.8974 7.96483 23.4941C4.54975 30.7107 1.14949 37.8337 7.47908 44.721C16.8233 54.8856 34.01 46.0117 30.5838 32.2595C28.4405 23.6512 21.7957 15.0093 17.8652 7.11561H17.8615Z`,fill:`#C3C2C1`}),(0,G.jsx)(`path`,{d:`M5.03547 30.112C9.64453 30.4936 11.632 35.7985 16.4154 35.791C19.6339 35.7873 20.2161 33.2283 22.3853 31.6197C31.6776 24.7286 33.5835 37.4894 27.9881 44.4254C18.1878 56.5653 -1.16063 44.6013 5.03917 30.1158L5.03547 30.112Z`,fill:`#1F8FEB`})]})}function tke({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 36 54`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`path`,{d:`M17.9625 4.48059L4.77216 26.3154L2.08228 40.2175L10.0224 50.8414H23.1594L33.3246 42.1693V30.2455L17.9625 4.48059Z`,fill:`#1F8FEB`}),(0,G.jsx)(`path`,{d:`M17.7948 0.00538C18.4273 -0.15091 20.3438 3.14642 20.8048 3.84781C25.3921 10.816 35.2715 26.9368 35.9001 34.8694C37.3784 53.5822 11.8702 61.3357 2.53562 45.3789C-1.73163 38.0829 0.0134 32.2087 3.1757 25.027C6.98574 16.3662 12.6284 7.90372 17.7948 0.00538ZM18.3549 7.24807L17.57 7.48441C14.4306 12.9431 10.9063 18.2341 8.1859 23.9368C4.67686 31.29 1.18305 38.5479 7.68679 45.5657C17.2881 55.9228 34.9476 46.8808 31.4271 32.8681C29.2249 24.0969 22.3974 15.2913 18.3587 7.24807H18.3549Z`,fill:`#C3C2C1`})]})}function nke({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 12 20`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`path`,{d:`M6 0.5C4.6 0.5 3.5 1.6 3.5 3V12.1C2.6 12.8 2 13.9 2 15C2 17.2 3.8 19 6 19C8.2 19 10 17.2 10 15C10 13.9 9.4 12.8 8.5 12.1V3C8.5 1.6 7.4 0.5 6 0.5Z`,stroke:`#C3C2C1`,strokeWidth:`1`,fill:`none`}),(0,G.jsx)(`circle`,{cx:`6`,cy:`15`,r:`2.5`,stroke:`#C3C2C1`,strokeWidth:`1`,fill:`none`})]})}function rke({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 12 20`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`rect`,{x:`4.5`,y:`8`,width:`3`,height:`4.5`,fill:`#d4a017`,rx:`0.5`}),(0,G.jsx)(`circle`,{cx:`6`,cy:`15`,r:`2`,fill:`#d4a017`}),(0,G.jsx)(`path`,{d:`M6 0.5C4.6 0.5 3.5 1.6 3.5 3V12.1C2.6 12.8 2 13.9 2 15C2 17.2 3.8 19 6 19C8.2 19 10 17.2 10 15C10 13.9 9.4 12.8 8.5 12.1V3C8.5 1.6 7.4 0.5 6 0.5Z`,stroke:`#C3C2C1`,strokeWidth:`1`,fill:`none`})]})}function ike({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 12 20`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`rect`,{x:`4.5`,y:`3`,width:`3`,height:`9.5`,fill:`#c62828`,rx:`0.5`}),(0,G.jsx)(`circle`,{cx:`6`,cy:`15`,r:`2`,fill:`#c62828`}),(0,G.jsx)(`path`,{d:`M6 0.5C4.6 0.5 3.5 1.6 3.5 3V12.1C2.6 12.8 2 13.9 2 15C2 17.2 3.8 19 6 19C8.2 19 10 17.2 10 15C10 13.9 9.4 12.8 8.5 12.1V3C8.5 1.6 7.4 0.5 6 0.5Z`,stroke:`#C3C2C1`,strokeWidth:`1`,fill:`none`})]})}function ake({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 24 24`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,stroke:`currentColor`,strokeWidth:`1.5`,strokeLinecap:`round`,strokeLinejoin:`round`,children:[(0,G.jsx)(`rect`,{x:`9.2`,y:`3.4`,width:`5.6`,height:`8.1`}),(0,G.jsx)(`rect`,{x:`6`,y:`11.5`,width:`12.1`,height:`3.7`}),(0,G.jsx)(`path`,{d:`M 7.3 15.2 L 12.1 19.6 L 16.7 15.2`})]})}function aG({className:e,color:t,isHeating:n}){let r={"text-orange-400":`#fb923c`,"text-blue-400":`#60a5fa`,"text-green-400":`#4ade80`}[t]||`#888`,i=n?{filter:`drop-shadow(0 0 4px ${r}) drop-shadow(0 0 8px ${r})`}:{};return n?(0,G.jsxs)(`svg`,{className:e,style:i,viewBox:`0 0 12 20`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`rect`,{x:`4.5`,y:`3`,width:`3`,height:`9.5`,fill:r,rx:`0.5`}),(0,G.jsx)(`circle`,{cx:`6`,cy:`15`,r:`2`,fill:r}),(0,G.jsx)(`path`,{d:`M6 0.5C4.6 0.5 3.5 1.6 3.5 3V12.1C2.6 12.8 2 13.9 2 15C2 17.2 3.8 19 6 19C8.2 19 10 17.2 10 15C10 13.9 9.4 12.8 8.5 12.1V3C8.5 1.6 7.4 0.5 6 0.5Z`,stroke:r,strokeWidth:`1`,fill:`none`})]}):(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 12 20`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`path`,{d:`M6 0.5C4.6 0.5 3.5 1.6 3.5 3V12.1C2.6 12.8 2 13.9 2 15C2 17.2 3.8 19 6 19C8.2 19 10 17.2 10 15C10 13.9 9.4 12.8 8.5 12.1V3C8.5 1.6 7.4 0.5 6 0.5Z`,stroke:r,strokeWidth:`1`,fill:`none`}),(0,G.jsx)(`circle`,{cx:`6`,cy:`15`,r:`2.5`,stroke:r,strokeWidth:`1`,fill:`none`})]})}function oke({state:e,onClick:t}){let{t:n}=U(),r=e!==null,i=`flex items-center justify-center w-[18px] h-[18px] rounded text-[length:var(--pc-t10,10px)] transition-colors `,a;return e===!0?(i+=r?`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400 hover:bg-blue-500/30 cursor-pointer`:`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400 cursor-default`,a=n(`printers.amsBackup.titleOn`)):e===!1?(i+=r?`bg-bambu-dark text-bambu-gray hover:text-white hover:bg-bambu-dark/80 cursor-pointer`:`bg-bambu-dark text-bambu-gray cursor-default`,a=n(`printers.amsBackup.titleOff`)):(i+=`bg-bambu-dark text-bambu-gray/50 cursor-default`,a=n(`printers.amsBackup.titleUnknown`)),(0,G.jsx)(`button`,{type:`button`,disabled:!r,onClick:()=>r&&t(),className:i,title:a,"aria-label":a,children:r?(0,G.jsx)(Hl,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}):(0,G.jsx)(`span`,{children:`?`})})}function ske({hidden:e,onClick:t}){let{t:n}=U(),r=n(e?`printers.externalSpool.show`:`printers.externalSpool.hide`);return(0,G.jsx)(`button`,{type:`button`,onClick:t,"aria-pressed":e,className:`flex items-center justify-center w-[18px] h-[18px] rounded transition-colors cursor-pointer ${e?`bg-bambu-green/20 text-bambu-green hover:bg-bambu-green/30`:`bg-bambu-dark text-bambu-gray hover:text-white hover:bg-bambu-dark/80`}`,title:r,"aria-label":r,children:e?(0,G.jsx)(rc,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}):(0,G.jsx)(ic,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`})})}function oG({humidity:e,goodThreshold:t=40,fairThreshold:n=60,onClick:r,compact:i}){let a=typeof e==`string`?parseInt(e,10):e,o=typeof t==`number`?t:40,s=typeof n==`number`?n:60,c,l;isNaN(a)?(c=`#C3C2C1`,l=`Unknown`):a<=o?(c=`#22a352`,l=`Good`):a<=s?(c=`#d4a017`,l=`Fair`):(c=`#c62828`,l=`Bad`);let u;return u=isNaN(a)||a<=o?$Oe:a<=s?eke:tke,(0,G.jsxs)(`button`,{type:`button`,onClick:r,className:`flex items-center gap-1 ${r?`cursor-pointer hover:opacity-80 transition-opacity`:``}`,title:`Humidity: ${a}% - ${l}${r?` (click for history)`:``}`,children:[(0,G.jsx)(u,{className:i?`w-2.5 h-3`:`w-3 h-4`}),(0,G.jsxs)(`span`,{className:`font-medium tabular-nums ${i?`text-[length:var(--pc-t10,10px)]`:`text-xs`}`,style:{color:c},children:[a,`%`]})]})}function sG({temp:e,goodThreshold:t=28,fairThreshold:n=35,onClick:r,compact:i}){let a=typeof t==`number`?t:28,o=typeof n==`number`?n:35,s,c,l;return e<=a?(s=`#22a352`,c=`Good`,l=nke):e<=o?(s=`#d4a017`,c=`Fair`,l=rke):(s=`#c62828`,c=`Bad`,l=ike),(0,G.jsxs)(`button`,{type:`button`,onClick:r,className:`flex items-center gap-1 ${r?`cursor-pointer hover:opacity-80 transition-opacity`:``}`,title:`Temperature: ${e}°C - ${c}${r?` (click for history)`:``}`,children:[(0,G.jsx)(l,{className:i?`w-2.5 h-3`:`w-3 h-4`}),(0,G.jsxs)(`span`,{className:`tabular-nums text-right ${i?`text-[length:var(--pc-t10,10px)] w-8`:`w-12`}`,style:{color:s},children:[e,`°C`]})]})}function cG(e){return e?.tray_type?null:e?.exists===!0?`reset`:e?.exists===!1||e?.state===9||e?.state===10?`physical`:`reset`}var cke=3e4;function lke({url:e,printName:t,className:n=`w-20 h-20`,radiusClass:r=`rounded-lg`}){let{t:i}=U(),[a,o]=(0,y.useState)(!1),[s,c]=(0,y.useState)(!1),[l,u]=(0,y.useState)(!1),d=(0,y.useRef)(null),f=(0,y.useMemo)(()=>e?_d(`${e}${e.includes(`?`)?`&`:`?`}v=${encodeURIComponent(t||Date.now().toString())}`):null,[e,t]);return(0,y.useEffect)(()=>{c(!1);let e=d.current;o(!!(e?.complete&&e.naturalWidth>0))},[f]),(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`${n} flex-shrink-0 ${r} overflow-hidden bg-bambu-dark-tertiary flex items-center justify-center ${f&&a?`cursor-pointer`:``}`,onClick:()=>f&&a&&u(!0),children:f&&!s?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`img`,{ref:d,src:f,alt:i(`printers.printPreview`),className:`w-full h-full object-cover ${a?`block`:`hidden`}`,onLoad:()=>o(!0),onError:()=>c(!0)}),!a&&(0,G.jsx)(Zo,{className:`w-8 h-8 text-bambu-gray`})]}):(0,G.jsx)(Zo,{className:`w-8 h-8 text-bambu-gray`})}),l&&f&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/80 flex items-center justify-center z-50 p-8`,onClick:()=>u(!1),children:(0,G.jsxs)(`div`,{className:`relative max-w-2xl max-h-full`,children:[(0,G.jsx)(`img`,{src:f,alt:i(`printers.printPreview`),className:`max-w-full max-h-[80vh] rounded-lg shadow-2xl`}),t&&(0,G.jsx)(`p`,{className:`text-white text-center mt-4 text-lg`,children:t})]})})]})}function uke({printers:e}){let{t}=U(),n=co(),[r,i]=(0,y.useState)(0);(0,y.useEffect)(()=>{let e=!1,t=n.getQueryCache().subscribe(()=>{e||(e=!0,requestAnimationFrame(()=>{i(e=>e+1),e=!1}))});return()=>t()},[n]);let{counts:a,nextFinish:o}=(0,y.useMemo)(()=>{let t=0,r=0,i=0,a=0,o=0,s=0,c=0,l=null,u=null,d=0;return e?.forEach(e=>{let f=n.getQueryData([`printerStatus`,e.id]);if(f===void 0)s++;else if(!f.connected)o++;else{let n=f.hms_errors?Dm(f.hms_errors).length:0;switch(n>0&&c++,f.state){case`RUNNING`:t++,f.remaining_time!=null&&f.remaining_time>0&&(u===null||f.remaining_time<u)&&(u=f.remaining_time,l=e.name,d=f.progress||0);break;case`PAUSE`:r++;break;case`FINISH`:i++;break;case`FAILED`:n>0||i++;break;default:a++;break}}}),{counts:{printing:t,paused:r,finished:i,idle:a,offline:o,loading:s,error:c,total:e?.length||0},nextFinish:l&&u?{name:l,remainingMin:u,progress:d}:null}},[e,n,r]);return e?.length?(0,G.jsxs)(`div`,{className:`mt-1 flex flex-wrap items-center gap-4 gap-y-2 text-bambu-gray`,children:[[{count:a.printing,dot:`bg-bambu-green animate-pulse`,label:t(`printers.status.printing`).toLowerCase()},{count:a.paused,dot:`bg-status-warning`,label:t(`printers.status.paused`,`paused`).toLowerCase()},{count:a.finished,dot:`bg-blue-400`,label:t(`printers.status.finished`,`finished`).toLowerCase()},{count:a.idle,dot:a.idle>0?`bg-bambu-green`:`bg-gray-500`,label:t(`printers.status.available`).toLowerCase()},{count:a.error,dot:`bg-status-error`,label:t(`printers.status.problem`).toLowerCase()},{count:a.offline,dot:`bg-gray-400`,label:t(`printers.status.offline`).toLowerCase()}].map(({count:e,dot:t,label:n})=>e>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full ${t}`}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[(0,G.jsx)(`span`,{className:`text-white font-medium`,children:e}),` `,n]})]},n)),o&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`w-px h-4 bg-bambu-dark-tertiary`}),(0,G.jsxs)(`div`,{className:`flex flex-col gap-1 sm:flex-row sm:items-center sm:gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`span`,{className:`text-bambu-green font-medium`,children:[t(`printers.nextAvailable`),`:`]}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:o.name})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 w-full sm:w-auto`,children:[(0,G.jsx)(`div`,{className:`w-full sm:w-16 bg-bambu-dark-tertiary rounded-full h-1.5`,children:(0,G.jsx)(`div`,{className:`bg-bambu-green h-1.5 rounded-full transition-all`,style:{width:`${o.progress}%`}})}),(0,G.jsxs)(`span`,{className:`text-white font-medium`,children:[Math.round(o.progress),`%`]}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[`(`,op(o.remainingMin*60),`)`]})]})]})]})]}):null}function lG({value:e,options:t,onChange:n,fullWidth:r=!1}){let[i,a]=(0,y.useState)(!1),o=t.find(t=>t.value===e)??t[0];return(0,G.jsxs)(`div`,{className:`relative ${r?`w-full min-w-0`:``}`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>a(e=>!e),className:`h-8 px-2 rounded-lg border bg-bambu-dark border-bambu-dark-tertiary text-white text-sm font-medium transition-colors hover:bg-bambu-dark-tertiary focus:outline-none focus:border-bambu-green flex items-center justify-between gap-2 ${r?`w-full`:`min-w-28`}`,children:[(0,G.jsx)(`span`,{className:`truncate`,children:o?.label}),(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray transition-transform ${i?`rotate-180`:``}`})]}),i&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-10`,onClick:()=>a(!1)}),(0,G.jsx)(`div`,{className:`absolute left-0 top-full z-20 mt-1 min-w-full rounded-lg border border-bambu-dark-tertiary bg-bambu-dark-secondary py-1 shadow-xl`,children:t.map(t=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>{n(t.value),a(!1)},className:`w-full px-3 py-2 text-left text-sm transition-colors hover:bg-bambu-dark-tertiary ${t.value===e?`text-bambu-green`:`text-white`}`,children:t.label},t.value))})]})]})}function uG({label:e,icon:t,children:n}){let[r,i]=(0,y.useState)(!1);return(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>i(e=>!e),className:`h-8 w-8 rounded-lg border bg-bambu-dark border-bambu-dark-tertiary text-white hover:bg-bambu-dark-tertiary transition-colors flex items-center justify-center`,"aria-label":e,title:e,children:t}),r&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-10`,onClick:()=>i(!1)}),(0,G.jsx)(`div`,{className:`absolute right-0 top-full z-20 mt-1 min-w-40 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark-secondary p-2 shadow-xl`,children:n})]})]})}function dG({title:e,options:t=[],unit:n,customMin:r,customMax:i,customStep:a=1,widthClass:o=`w-[240px]`,popoverWidth:s=240,popoverHeight:c=280,isPending:l,onClose:u,onSubmit:d,children:f}){let p=(0,y.useRef)(null),[m,h]=(0,y.useState)(null),[g,_]=(0,y.useState)(``);(0,y.useLayoutEffect)(()=>{let e=p.current?.parentElement;if(!e)return;let t=()=>{h(um({triggerRect:e.getBoundingClientRect(),popoverWidth:s,estimatedHeight:c,horizontalAlign:`center`}))};return t(),window.addEventListener(`resize`,t),window.addEventListener(`scroll`,t,!0),()=>{window.removeEventListener(`resize`,t),window.removeEventListener(`scroll`,t,!0)}},[s,c]);let v=n!==void 0,b=()=>{let e=Number(g);Number.isFinite(e)&&d?.(Math.round(Math.min(i??e,Math.max(r??e,e))))};return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{ref:p,className:`hidden`,"aria-hidden":`true`}),(0,At.createPortal)((0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-[1000]`,onClick:u}),(0,G.jsxs)(`div`,{className:`fixed z-[1001] flex ${o} flex-col overflow-hidden rounded-xl border border-bambu-dark-tertiary bg-bambu-dark-secondary shadow-2xl`,style:{top:m?.top??-9999,left:m?.left??-9999,visibility:m?`visible`:`hidden`},onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(`div`,{className:`shrink-0 px-3 py-2.5 text-center text-sm font-medium text-white`,children:e}),(0,G.jsx)(`div`,{className:`shrink-0 h-px bg-bambu-dark-tertiary`}),t.length>0&&(0,G.jsx)(`div`,{className:`px-3 py-2.5`,children:(0,G.jsx)(`div`,{className:`grid grid-cols-2 gap-1.5`,children:t.map(e=>(0,G.jsx)(`button`,{type:`button`,disabled:l,onClick:()=>d?.(e.value),className:`h-8 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark px-2 text-xs font-medium text-white transition-colors hover:bg-bambu-dark-tertiary disabled:cursor-not-allowed disabled:opacity-50`,children:e.label},`${e.label}-${e.value}`))})}),f,v&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`shrink-0 h-px bg-bambu-dark-tertiary`}),(0,G.jsxs)(`form`,{className:`flex gap-1.5 px-3 pt-2.5 pb-3`,onSubmit:e=>{e.preventDefault(),b()},children:[(0,G.jsx)(`input`,{type:`number`,min:r,max:i,step:a,value:g,onChange:e=>_(e.target.value),placeholder:`Custom`,className:`h-8 min-w-0 flex-1 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark px-2 text-xs text-white placeholder:text-bambu-gray/60 focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`button`,{type:`submit`,disabled:l||g.trim()===``,className:`h-8 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark px-2 text-xs font-medium text-white transition-colors hover:bg-bambu-dark-tertiary disabled:cursor-not-allowed disabled:opacity-50`,children:`Set`})]})]})]})]}),document.body)]})}var dke=Tm(bm,`C`);function fG({label:e,current:t,target:n,isActive:r,isPending:i,onSubmit:a,options:o=dke}){let[s,c]=(0,y.useState)(``),l=()=>{let e=Number(s);Number.isFinite(e)&&a(Math.min(320,Math.max(0,Math.round(e))))};return(0,G.jsxs)(`div`,{className:`rounded-lg border p-2 ${r?`border-amber-500/60 dark:border-amber-400/60 bg-amber-50 dark:bg-amber-400/10`:`border-bambu-dark-tertiary bg-bambu-dark`}`,children:[(0,G.jsxs)(`div`,{className:`mb-1.5 flex items-center justify-between gap-2`,children:[(0,G.jsx)(`span`,{className:`text-xs font-medium ${r?`text-amber-700 dark:text-amber-300`:`text-white`}`,children:e}),(0,G.jsxs)(`span`,{className:`text-[10px] text-bambu-gray`,children:[Math.round(t??0),`°C`,n===void 0?``:` / ${Math.round(n)}°`]})]}),(0,G.jsx)(`div`,{className:`grid grid-cols-2 gap-1`,children:o.map(t=>(0,G.jsx)(`button`,{type:`button`,disabled:i,onClick:()=>a(t.value),className:`h-7 rounded-md border border-bambu-dark-tertiary bg-bambu-dark-secondary px-1.5 text-[11px] font-medium text-white transition-colors hover:bg-bambu-dark-tertiary disabled:cursor-not-allowed disabled:opacity-50`,children:t.label},`${e}-${t.value}`))}),(0,G.jsxs)(`form`,{className:`mt-1.5 flex gap-1`,onSubmit:e=>{e.preventDefault(),l()},children:[(0,G.jsx)(`input`,{type:`number`,min:0,max:320,step:1,value:s,onChange:e=>c(e.target.value),placeholder:`Custom`,className:`h-7 min-w-0 flex-1 rounded-md border border-bambu-dark-tertiary bg-bambu-dark-secondary px-1.5 text-[11px] text-white placeholder:text-bambu-gray/60 focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`button`,{type:`submit`,disabled:i||s.trim()===``,className:`h-7 rounded-md border border-bambu-dark-tertiary bg-bambu-dark-secondary px-2 text-[11px] font-medium text-white transition-colors hover:bg-bambu-dark-tertiary disabled:cursor-not-allowed disabled:opacity-50`,children:`Set`})]})]})}var fke=[`error`,`printing`,`paused`,`finished`,`idle`,`offline`],pG={error:{labelKey:`printers.status.problem`,dot:`bg-status-error`},printing:{labelKey:`printers.status.printing`,dot:`bg-bambu-green animate-pulse`},paused:{labelKey:`printers.status.paused`,dot:`bg-status-warning`},finished:{labelKey:`printers.status.finished`,dot:`bg-blue-400`},idle:{labelKey:`printers.status.idle`,dot:`bg-bambu-green`},offline:{labelKey:`printers.status.offline`,dot:`bg-gray-400`}};function mG(e){if(!e?.connected)return`offline`;if((e.hms_errors?Dm(e.hms_errors):[]).length>0)return`error`;switch(e.state){case`RUNNING`:return`printing`;case`PAUSE`:return`paused`;case`FINISH`:return`finished`;case`FAILED`:return`finished`;default:return`idle`}}function pke(e,t){if(t)return t;switch(e){case`RUNNING`:return`Printing`;case`PAUSE`:return`Paused`;case`FINISH`:return`Finished`;case`FAILED`:return`Failed`;case`IDLE`:return`Idle`;default:return e?e.charAt(0)+e.slice(1).toLowerCase():`Idle`}}var mke=new Set([`X1C`,`X1`,`X1E`,`X2D`,`P1S`,`P2S`,`H2D`,`H2D Pro`,`H2C`,`H2S`]),hke=new Set([`P2S`,`X2D`]);function hG(e){return e?{O1D:`H2D`,O1E:`H2D Pro`,O2D:`H2D Pro`,O1C:`H2C`,O1C2:`H2C`,O1S:`H2S`,"BL-P001":`X1C`,"BL-P002":`X1`,"BL-P003":`X1E`,N6:`X2D`,N9:`A2L`,C11:`P1S`,C12:`P1P`,C13:`P2S`,N2S:`A1`,N1:`A1 Mini`,X1C:`X1C`,X1:`X1`,X1E:`X1E`,X2D:`X2D`,P1S:`P1S`,P1P:`P1P`,P2S:`P2S`,A1:`A1`,"A1 Mini":`A1 Mini`,A2L:`A2L`,H2D:`H2D`,"H2D Pro":`H2D Pro`,H2C:`H2C`,H2S:`H2S`}[e]||e:``}function gG({ams:e,printerId:t,label:n,amsLabels:r,canEdit:i,onSaved:a,children:o}){let{t:s}=U(),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(`top`),[f,p]=(0,y.useState)(``),[m,h]=(0,y.useState)(!1),[g,_]=(0,y.useState)(null),[v,b]=(0,y.useState)(!1),x=(0,y.useRef)(null),S=(0,y.useRef)(null),C=(0,y.useRef)(null);(0,y.useEffect)(()=>{c&&(p(r?.[e.id]??``),_(null),requestAnimationFrame(()=>{if(x.current&&S.current){let e=x.current.getBoundingClientRect(),t=e.top-56,n=window.innerHeight-e.bottom;d(t<S.current.offsetHeight+12&&n>t?`bottom`:`top`)}}))},[c,r,e.id]);let w=()=>{C.current&&clearTimeout(C.current),C.current=setTimeout(()=>l(!0),80)},T=()=>{C.current&&clearTimeout(C.current),v||(C.current=setTimeout(()=>l(!1),200))};(0,y.useEffect)(()=>()=>{C.current&&clearTimeout(C.current)},[]);let E=async()=>{if(i){h(!0),_(null);try{let n=f.trim();n?await Z.saveAmsLabel(t,e.id,n,e.serial_number):await Z.deleteAmsLabel(t,e.id,e.serial_number),a(),l(!1)}catch(e){_(e instanceof Error?e.message:String(e))}finally{h(!1)}}};return(0,G.jsxs)(`div`,{ref:x,className:`relative inline-block`,onMouseEnter:w,onMouseLeave:T,children:[o,c&&(0,G.jsx)(`div`,{ref:S,className:`
+            `})]})]})}function $Oe({slots:e,filamentInfo:t}){let{t:n}=U(),r=e.filter(e=>e.id>=2),i=Array.from({length:6},(e,t)=>r.find(e=>e.id===16+t)??{id:-(t+1),nozzle_type:``,nozzle_diameter:``,wear:null,stat:null,max_temp:0,serial_number:``,filament_color:``,filament_id:``,filament_type:``});return(0,G.jsxs)(`div`,{className:`text-center px-2.5 py-1.5 bg-bambu-dark rounded-lg flex-[0_1_auto] flex flex-col justify-center`,children:[(0,G.jsx)(`p`,{className:`text-[length:var(--pc-t9,9px)] text-bambu-gray mb-1`,children:n(`printers.nozzleRack`)}),(0,G.jsx)(`div`,{className:`flex gap-[3px] justify-center`,children:i.map((e,n)=>{let r=!e.nozzle_diameter&&!e.nozzle_type,i=r?null:Af(e.filament_color),a=i?jf(e.filament_color):!1;return(0,G.jsx)(sG,{slot:e,index:n,filamentName:e.filament_id?t?.[e.filament_id]?.name:void 0,children:(0,G.jsxs)(`div`,{className:`flex flex-col items-center gap-0.5`,children:[(0,G.jsx)(`div`,{className:`w-[var(--pc-i7,28px)] h-[var(--pc-i7,28px)] rounded flex items-center justify-center cursor-default transition-colors border-b-2 ${r?`bg-bambu-dark-tertiary/20 border-bambu-dark-tertiary/20`:`bg-bambu-dark-tertiary/40 border-bambu-dark-tertiary/40`}`,style:i?{backgroundColor:i}:void 0,children:(0,G.jsx)(`span`,{"data-rack-diameter":!0,className:`text-[length:var(--pc-t10,10px)] font-semibold ${r?`text-bambu-gray/30`:a?`text-black/80`:`text-white`}`,style:i&&!a?{textShadow:`0 1px 3px rgba(0,0,0,0.9)`}:void 0,children:r?`—`:e.nozzle_diameter||`?`})}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t8,8px)] leading-none tabular-nums text-bambu-gray/70`,children:n+1})]})},e.id>=0?e.id:`empty-${n}`)})})]})}function eke({className:e}){return(0,G.jsx)(`svg`,{className:e,viewBox:`0 0 36 54`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:(0,G.jsx)(`path`,{d:`M17.8131 0.00538C18.4463 -0.15091 20.3648 3.14642 20.8264 3.84781C25.4187 10.816 35.3089 26.9368 35.9383 34.8694C37.4182 53.5822 11.882 61.3357 2.53721 45.3789C-1.73471 38.0791 0.016 32.2049 3.178 25.0232C6.99221 16.3662 12.6411 7.90372 17.8131 0.00538ZM18.3738 7.24807L17.5881 7.48441C14.4452 12.9431 10.917 18.2341 8.19369 23.9368C4.6808 31.29 1.18317 38.5479 7.69403 45.5657C17.3058 55.9228 34.9847 46.8808 31.4604 32.8681C29.2558 24.0969 22.4207 15.2913 18.3776 7.24807H18.3738Z`,fill:`#C3C2C1`})})}function tke({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 35 53`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`path`,{d:`M17.3165 0.0038C17.932 -0.14959 19.7971 3.08645 20.2458 3.77481C24.7103 10.6135 34.3251 26.4346 34.937 34.2198C36.3757 52.5848 11.5505 60.1942 2.46584 44.534C-1.68714 37.3735 0.0148 31.6085 3.08879 24.5603C6.79681 16.0605 12.2884 7.75907 17.3165 0.0038ZM17.8615 7.11561L17.0977 7.34755C14.0423 12.7048 10.6124 17.8974 7.96483 23.4941C4.54975 30.7107 1.14949 37.8337 7.47908 44.721C16.8233 54.8856 34.01 46.0117 30.5838 32.2595C28.4405 23.6512 21.7957 15.0093 17.8652 7.11561H17.8615Z`,fill:`#C3C2C1`}),(0,G.jsx)(`path`,{d:`M5.03547 30.112C9.64453 30.4936 11.632 35.7985 16.4154 35.791C19.6339 35.7873 20.2161 33.2283 22.3853 31.6197C31.6776 24.7286 33.5835 37.4894 27.9881 44.4254C18.1878 56.5653 -1.16063 44.6013 5.03917 30.1158L5.03547 30.112Z`,fill:`#1F8FEB`})]})}function nke({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 36 54`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`path`,{d:`M17.9625 4.48059L4.77216 26.3154L2.08228 40.2175L10.0224 50.8414H23.1594L33.3246 42.1693V30.2455L17.9625 4.48059Z`,fill:`#1F8FEB`}),(0,G.jsx)(`path`,{d:`M17.7948 0.00538C18.4273 -0.15091 20.3438 3.14642 20.8048 3.84781C25.3921 10.816 35.2715 26.9368 35.9001 34.8694C37.3784 53.5822 11.8702 61.3357 2.53562 45.3789C-1.73163 38.0829 0.0134 32.2087 3.1757 25.027C6.98574 16.3662 12.6284 7.90372 17.7948 0.00538ZM18.3549 7.24807L17.57 7.48441C14.4306 12.9431 10.9063 18.2341 8.1859 23.9368C4.67686 31.29 1.18305 38.5479 7.68679 45.5657C17.2881 55.9228 34.9476 46.8808 31.4271 32.8681C29.2249 24.0969 22.3974 15.2913 18.3587 7.24807H18.3549Z`,fill:`#C3C2C1`})]})}function rke({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 12 20`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`path`,{d:`M6 0.5C4.6 0.5 3.5 1.6 3.5 3V12.1C2.6 12.8 2 13.9 2 15C2 17.2 3.8 19 6 19C8.2 19 10 17.2 10 15C10 13.9 9.4 12.8 8.5 12.1V3C8.5 1.6 7.4 0.5 6 0.5Z`,stroke:`#C3C2C1`,strokeWidth:`1`,fill:`none`}),(0,G.jsx)(`circle`,{cx:`6`,cy:`15`,r:`2.5`,stroke:`#C3C2C1`,strokeWidth:`1`,fill:`none`})]})}function ike({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 12 20`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`rect`,{x:`4.5`,y:`8`,width:`3`,height:`4.5`,fill:`#d4a017`,rx:`0.5`}),(0,G.jsx)(`circle`,{cx:`6`,cy:`15`,r:`2`,fill:`#d4a017`}),(0,G.jsx)(`path`,{d:`M6 0.5C4.6 0.5 3.5 1.6 3.5 3V12.1C2.6 12.8 2 13.9 2 15C2 17.2 3.8 19 6 19C8.2 19 10 17.2 10 15C10 13.9 9.4 12.8 8.5 12.1V3C8.5 1.6 7.4 0.5 6 0.5Z`,stroke:`#C3C2C1`,strokeWidth:`1`,fill:`none`})]})}function ake({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 12 20`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`rect`,{x:`4.5`,y:`3`,width:`3`,height:`9.5`,fill:`#c62828`,rx:`0.5`}),(0,G.jsx)(`circle`,{cx:`6`,cy:`15`,r:`2`,fill:`#c62828`}),(0,G.jsx)(`path`,{d:`M6 0.5C4.6 0.5 3.5 1.6 3.5 3V12.1C2.6 12.8 2 13.9 2 15C2 17.2 3.8 19 6 19C8.2 19 10 17.2 10 15C10 13.9 9.4 12.8 8.5 12.1V3C8.5 1.6 7.4 0.5 6 0.5Z`,stroke:`#C3C2C1`,strokeWidth:`1`,fill:`none`})]})}function oke({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 24 24`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,stroke:`currentColor`,strokeWidth:`1.5`,strokeLinecap:`round`,strokeLinejoin:`round`,children:[(0,G.jsx)(`rect`,{x:`9.2`,y:`3.4`,width:`5.6`,height:`8.1`}),(0,G.jsx)(`rect`,{x:`6`,y:`11.5`,width:`12.1`,height:`3.7`}),(0,G.jsx)(`path`,{d:`M 7.3 15.2 L 12.1 19.6 L 16.7 15.2`})]})}function cG({className:e,color:t,isHeating:n}){let r={"text-orange-400":`#fb923c`,"text-blue-400":`#60a5fa`,"text-green-400":`#4ade80`}[t]||`#888`,i=n?{filter:`drop-shadow(0 0 4px ${r}) drop-shadow(0 0 8px ${r})`}:{};return n?(0,G.jsxs)(`svg`,{className:e,style:i,viewBox:`0 0 12 20`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`rect`,{x:`4.5`,y:`3`,width:`3`,height:`9.5`,fill:r,rx:`0.5`}),(0,G.jsx)(`circle`,{cx:`6`,cy:`15`,r:`2`,fill:r}),(0,G.jsx)(`path`,{d:`M6 0.5C4.6 0.5 3.5 1.6 3.5 3V12.1C2.6 12.8 2 13.9 2 15C2 17.2 3.8 19 6 19C8.2 19 10 17.2 10 15C10 13.9 9.4 12.8 8.5 12.1V3C8.5 1.6 7.4 0.5 6 0.5Z`,stroke:r,strokeWidth:`1`,fill:`none`})]}):(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 12 20`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`path`,{d:`M6 0.5C4.6 0.5 3.5 1.6 3.5 3V12.1C2.6 12.8 2 13.9 2 15C2 17.2 3.8 19 6 19C8.2 19 10 17.2 10 15C10 13.9 9.4 12.8 8.5 12.1V3C8.5 1.6 7.4 0.5 6 0.5Z`,stroke:r,strokeWidth:`1`,fill:`none`}),(0,G.jsx)(`circle`,{cx:`6`,cy:`15`,r:`2.5`,stroke:r,strokeWidth:`1`,fill:`none`})]})}function ske({state:e,onClick:t}){let{t:n}=U(),r=e!==null,i=`flex items-center justify-center w-[18px] h-[18px] rounded text-[length:var(--pc-t10,10px)] transition-colors `,a;return e===!0?(i+=r?`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400 hover:bg-blue-500/30 cursor-pointer`:`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400 cursor-default`,a=n(`printers.amsBackup.titleOn`)):e===!1?(i+=r?`bg-bambu-dark text-bambu-gray hover:text-white hover:bg-bambu-dark/80 cursor-pointer`:`bg-bambu-dark text-bambu-gray cursor-default`,a=n(`printers.amsBackup.titleOff`)):(i+=`bg-bambu-dark text-bambu-gray/50 cursor-default`,a=n(`printers.amsBackup.titleUnknown`)),(0,G.jsx)(`button`,{type:`button`,disabled:!r,onClick:()=>r&&t(),className:i,title:a,"aria-label":a,children:r?(0,G.jsx)(Hl,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}):(0,G.jsx)(`span`,{children:`?`})})}function cke({hidden:e,onClick:t}){let{t:n}=U(),r=n(e?`printers.externalSpool.show`:`printers.externalSpool.hide`);return(0,G.jsx)(`button`,{type:`button`,onClick:t,"aria-pressed":e,className:`flex items-center justify-center w-[18px] h-[18px] rounded transition-colors cursor-pointer ${e?`bg-bambu-green/20 text-bambu-green hover:bg-bambu-green/30`:`bg-bambu-dark text-bambu-gray hover:text-white hover:bg-bambu-dark/80`}`,title:r,"aria-label":r,children:e?(0,G.jsx)(rc,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}):(0,G.jsx)(ic,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`})})}function lG({humidity:e,goodThreshold:t=40,fairThreshold:n=60,onClick:r,compact:i}){let a=typeof e==`string`?parseInt(e,10):e,o=typeof t==`number`?t:40,s=typeof n==`number`?n:60,c,l;isNaN(a)?(c=`#C3C2C1`,l=`Unknown`):a<=o?(c=`#22a352`,l=`Good`):a<=s?(c=`#d4a017`,l=`Fair`):(c=`#c62828`,l=`Bad`);let u;return u=isNaN(a)||a<=o?eke:a<=s?tke:nke,(0,G.jsxs)(`button`,{type:`button`,onClick:r,className:`flex items-center gap-1 ${r?`cursor-pointer hover:opacity-80 transition-opacity`:``}`,title:`Humidity: ${a}% - ${l}${r?` (click for history)`:``}`,children:[(0,G.jsx)(u,{className:i?`w-2.5 h-3`:`w-3 h-4`}),(0,G.jsxs)(`span`,{className:`font-medium tabular-nums ${i?`text-[length:var(--pc-t10,10px)]`:`text-xs`}`,style:{color:c},children:[a,`%`]})]})}function uG({temp:e,goodThreshold:t=28,fairThreshold:n=35,onClick:r,compact:i}){let a=typeof t==`number`?t:28,o=typeof n==`number`?n:35,s,c,l;return e<=a?(s=`#22a352`,c=`Good`,l=rke):e<=o?(s=`#d4a017`,c=`Fair`,l=ike):(s=`#c62828`,c=`Bad`,l=ake),(0,G.jsxs)(`button`,{type:`button`,onClick:r,className:`flex items-center gap-1 ${r?`cursor-pointer hover:opacity-80 transition-opacity`:``}`,title:`Temperature: ${e}°C - ${c}${r?` (click for history)`:``}`,children:[(0,G.jsx)(l,{className:i?`w-2.5 h-3`:`w-3 h-4`}),(0,G.jsxs)(`span`,{className:`tabular-nums text-right ${i?`text-[length:var(--pc-t10,10px)] w-8`:`w-12`}`,style:{color:s},children:[e,`°C`]})]})}function dG(e){return e?.tray_type?null:e?.exists===!0?`reset`:e?.exists===!1||e?.state===9||e?.state===10?`physical`:`reset`}var lke=3e4;function uke({url:e,printName:t,className:n=`w-20 h-20`,radiusClass:r=`rounded-lg`}){let{t:i}=U(),[a,o]=(0,y.useState)(!1),[s,c]=(0,y.useState)(!1),[l,u]=(0,y.useState)(!1),d=(0,y.useRef)(null),f=(0,y.useMemo)(()=>e?_d(`${e}${e.includes(`?`)?`&`:`?`}v=${encodeURIComponent(t||Date.now().toString())}`):null,[e,t]);return(0,y.useEffect)(()=>{c(!1);let e=d.current;o(!!(e?.complete&&e.naturalWidth>0))},[f]),(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`${n} flex-shrink-0 ${r} overflow-hidden bg-bambu-dark-tertiary flex items-center justify-center ${f&&a?`cursor-pointer`:``}`,onClick:()=>f&&a&&u(!0),children:f&&!s?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`img`,{ref:d,src:f,alt:i(`printers.printPreview`),className:`w-full h-full object-cover ${a?`block`:`hidden`}`,onLoad:()=>o(!0),onError:()=>c(!0)}),!a&&(0,G.jsx)(Zo,{className:`w-8 h-8 text-bambu-gray`})]}):(0,G.jsx)(Zo,{className:`w-8 h-8 text-bambu-gray`})}),l&&f&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/80 flex items-center justify-center z-50 p-8`,onClick:()=>u(!1),children:(0,G.jsxs)(`div`,{className:`relative max-w-2xl max-h-full`,children:[(0,G.jsx)(`img`,{src:f,alt:i(`printers.printPreview`),className:`max-w-full max-h-[80vh] rounded-lg shadow-2xl`}),t&&(0,G.jsx)(`p`,{className:`text-white text-center mt-4 text-lg`,children:t})]})})]})}function dke({printers:e}){let{t}=U(),n=co(),[r,i]=(0,y.useState)(0);(0,y.useEffect)(()=>{let e=!1,t=n.getQueryCache().subscribe(()=>{e||(e=!0,requestAnimationFrame(()=>{i(e=>e+1),e=!1}))});return()=>t()},[n]);let{counts:a,nextFinish:o}=(0,y.useMemo)(()=>{let t=0,r=0,i=0,a=0,o=0,s=0,c=0,l=null,u=null,d=0;return e?.forEach(e=>{let f=n.getQueryData([`printerStatus`,e.id]);if(f===void 0)s++;else if(!f.connected)o++;else{let n=f.hms_errors?Dm(f.hms_errors).length:0;switch(n>0&&c++,f.state){case`RUNNING`:t++,f.remaining_time!=null&&f.remaining_time>0&&(u===null||f.remaining_time<u)&&(u=f.remaining_time,l=e.name,d=f.progress||0);break;case`PAUSE`:r++;break;case`FINISH`:i++;break;case`FAILED`:n>0||i++;break;default:a++;break}}}),{counts:{printing:t,paused:r,finished:i,idle:a,offline:o,loading:s,error:c,total:e?.length||0},nextFinish:l&&u?{name:l,remainingMin:u,progress:d}:null}},[e,n,r]);return e?.length?(0,G.jsxs)(`div`,{className:`mt-1 flex flex-wrap items-center gap-4 gap-y-2 text-bambu-gray`,children:[[{count:a.printing,dot:`bg-bambu-green animate-pulse`,label:t(`printers.status.printing`).toLowerCase()},{count:a.paused,dot:`bg-status-warning`,label:t(`printers.status.paused`,`paused`).toLowerCase()},{count:a.finished,dot:`bg-blue-400`,label:t(`printers.status.finished`,`finished`).toLowerCase()},{count:a.idle,dot:a.idle>0?`bg-bambu-green`:`bg-gray-500`,label:t(`printers.status.available`).toLowerCase()},{count:a.error,dot:`bg-status-error`,label:t(`printers.status.problem`).toLowerCase()},{count:a.offline,dot:`bg-gray-400`,label:t(`printers.status.offline`).toLowerCase()}].map(({count:e,dot:t,label:n})=>e>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full ${t}`}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[(0,G.jsx)(`span`,{className:`text-white font-medium`,children:e}),` `,n]})]},n)),o&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`w-px h-4 bg-bambu-dark-tertiary`}),(0,G.jsxs)(`div`,{className:`flex flex-col gap-1 sm:flex-row sm:items-center sm:gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`span`,{className:`text-bambu-green font-medium`,children:[t(`printers.nextAvailable`),`:`]}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:o.name})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 w-full sm:w-auto`,children:[(0,G.jsx)(`div`,{className:`w-full sm:w-16 bg-bambu-dark-tertiary rounded-full h-1.5`,children:(0,G.jsx)(`div`,{className:`bg-bambu-green h-1.5 rounded-full transition-all`,style:{width:`${o.progress}%`}})}),(0,G.jsxs)(`span`,{className:`text-white font-medium`,children:[Math.round(o.progress),`%`]}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[`(`,op(o.remainingMin*60),`)`]})]})]})]})]}):null}function fG({value:e,options:t,onChange:n,fullWidth:r=!1}){let[i,a]=(0,y.useState)(!1),o=t.find(t=>t.value===e)??t[0];return(0,G.jsxs)(`div`,{className:`relative ${r?`w-full min-w-0`:``}`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>a(e=>!e),className:`h-8 px-2 rounded-lg border bg-bambu-dark border-bambu-dark-tertiary text-white text-sm font-medium transition-colors hover:bg-bambu-dark-tertiary focus:outline-none focus:border-bambu-green flex items-center justify-between gap-2 ${r?`w-full`:`min-w-28`}`,children:[(0,G.jsx)(`span`,{className:`truncate`,children:o?.label}),(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray transition-transform ${i?`rotate-180`:``}`})]}),i&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-10`,onClick:()=>a(!1)}),(0,G.jsx)(`div`,{className:`absolute left-0 top-full z-20 mt-1 min-w-full rounded-lg border border-bambu-dark-tertiary bg-bambu-dark-secondary py-1 shadow-xl`,children:t.map(t=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>{n(t.value),a(!1)},className:`w-full px-3 py-2 text-left text-sm transition-colors hover:bg-bambu-dark-tertiary ${t.value===e?`text-bambu-green`:`text-white`}`,children:t.label},t.value))})]})]})}function pG({label:e,icon:t,children:n}){let[r,i]=(0,y.useState)(!1);return(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>i(e=>!e),className:`h-8 w-8 rounded-lg border bg-bambu-dark border-bambu-dark-tertiary text-white hover:bg-bambu-dark-tertiary transition-colors flex items-center justify-center`,"aria-label":e,title:e,children:t}),r&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-10`,onClick:()=>i(!1)}),(0,G.jsx)(`div`,{className:`absolute right-0 top-full z-20 mt-1 min-w-40 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark-secondary p-2 shadow-xl`,children:n})]})]})}function mG({title:e,options:t=[],unit:n,customMin:r,customMax:i,customStep:a=1,widthClass:o=`w-[240px]`,popoverWidth:s=240,popoverHeight:c=280,isPending:l,onClose:u,onSubmit:d,children:f}){let p=(0,y.useRef)(null),[m,h]=(0,y.useState)(null),[g,_]=(0,y.useState)(``);(0,y.useLayoutEffect)(()=>{let e=p.current?.parentElement;if(!e)return;let t=()=>{h(um({triggerRect:e.getBoundingClientRect(),popoverWidth:s,estimatedHeight:c,horizontalAlign:`center`}))};return t(),window.addEventListener(`resize`,t),window.addEventListener(`scroll`,t,!0),()=>{window.removeEventListener(`resize`,t),window.removeEventListener(`scroll`,t,!0)}},[s,c]);let v=n!==void 0,b=()=>{let e=Number(g);Number.isFinite(e)&&d?.(Math.round(Math.min(i??e,Math.max(r??e,e))))};return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{ref:p,className:`hidden`,"aria-hidden":`true`}),(0,At.createPortal)((0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-[1000]`,onClick:u}),(0,G.jsxs)(`div`,{className:`fixed z-[1001] flex ${o} flex-col overflow-hidden rounded-xl border border-bambu-dark-tertiary bg-bambu-dark-secondary shadow-2xl`,style:{top:m?.top??-9999,left:m?.left??-9999,visibility:m?`visible`:`hidden`},onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(`div`,{className:`shrink-0 px-3 py-2.5 text-center text-sm font-medium text-white`,children:e}),(0,G.jsx)(`div`,{className:`shrink-0 h-px bg-bambu-dark-tertiary`}),t.length>0&&(0,G.jsx)(`div`,{className:`px-3 py-2.5`,children:(0,G.jsx)(`div`,{className:`grid grid-cols-2 gap-1.5`,children:t.map(e=>(0,G.jsx)(`button`,{type:`button`,disabled:l,onClick:()=>d?.(e.value),className:`h-8 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark px-2 text-xs font-medium text-white transition-colors hover:bg-bambu-dark-tertiary disabled:cursor-not-allowed disabled:opacity-50`,children:e.label},`${e.label}-${e.value}`))})}),f,v&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`shrink-0 h-px bg-bambu-dark-tertiary`}),(0,G.jsxs)(`form`,{className:`flex gap-1.5 px-3 pt-2.5 pb-3`,onSubmit:e=>{e.preventDefault(),b()},children:[(0,G.jsx)(`input`,{type:`number`,min:r,max:i,step:a,value:g,onChange:e=>_(e.target.value),placeholder:`Custom`,className:`h-8 min-w-0 flex-1 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark px-2 text-xs text-white placeholder:text-bambu-gray/60 focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`button`,{type:`submit`,disabled:l||g.trim()===``,className:`h-8 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark px-2 text-xs font-medium text-white transition-colors hover:bg-bambu-dark-tertiary disabled:cursor-not-allowed disabled:opacity-50`,children:`Set`})]})]})]})]}),document.body)]})}var fke=Tm(bm,`C`);function hG({label:e,current:t,target:n,isActive:r,isPending:i,onSubmit:a,options:o=fke}){let[s,c]=(0,y.useState)(``),l=()=>{let e=Number(s);Number.isFinite(e)&&a(Math.min(320,Math.max(0,Math.round(e))))};return(0,G.jsxs)(`div`,{className:`rounded-lg border p-2 ${r?`border-amber-500/60 dark:border-amber-400/60 bg-amber-50 dark:bg-amber-400/10`:`border-bambu-dark-tertiary bg-bambu-dark`}`,children:[(0,G.jsxs)(`div`,{className:`mb-1.5 flex items-center justify-between gap-2`,children:[(0,G.jsx)(`span`,{className:`text-xs font-medium ${r?`text-amber-700 dark:text-amber-300`:`text-white`}`,children:e}),(0,G.jsxs)(`span`,{className:`text-[10px] text-bambu-gray`,children:[Math.round(t??0),`°C`,n===void 0?``:` / ${Math.round(n)}°`]})]}),(0,G.jsx)(`div`,{className:`grid grid-cols-2 gap-1`,children:o.map(t=>(0,G.jsx)(`button`,{type:`button`,disabled:i,onClick:()=>a(t.value),className:`h-7 rounded-md border border-bambu-dark-tertiary bg-bambu-dark-secondary px-1.5 text-[11px] font-medium text-white transition-colors hover:bg-bambu-dark-tertiary disabled:cursor-not-allowed disabled:opacity-50`,children:t.label},`${e}-${t.value}`))}),(0,G.jsxs)(`form`,{className:`mt-1.5 flex gap-1`,onSubmit:e=>{e.preventDefault(),l()},children:[(0,G.jsx)(`input`,{type:`number`,min:0,max:320,step:1,value:s,onChange:e=>c(e.target.value),placeholder:`Custom`,className:`h-7 min-w-0 flex-1 rounded-md border border-bambu-dark-tertiary bg-bambu-dark-secondary px-1.5 text-[11px] text-white placeholder:text-bambu-gray/60 focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`button`,{type:`submit`,disabled:i||s.trim()===``,className:`h-7 rounded-md border border-bambu-dark-tertiary bg-bambu-dark-secondary px-2 text-[11px] font-medium text-white transition-colors hover:bg-bambu-dark-tertiary disabled:cursor-not-allowed disabled:opacity-50`,children:`Set`})]})]})}var pke=[`error`,`printing`,`paused`,`finished`,`idle`,`offline`],gG={error:{labelKey:`printers.status.problem`,dot:`bg-status-error`},printing:{labelKey:`printers.status.printing`,dot:`bg-bambu-green animate-pulse`},paused:{labelKey:`printers.status.paused`,dot:`bg-status-warning`},finished:{labelKey:`printers.status.finished`,dot:`bg-blue-400`},idle:{labelKey:`printers.status.idle`,dot:`bg-bambu-green`},offline:{labelKey:`printers.status.offline`,dot:`bg-gray-400`}};function _G(e){if(!e?.connected)return`offline`;if((e.hms_errors?Dm(e.hms_errors):[]).length>0)return`error`;switch(e.state){case`RUNNING`:return`printing`;case`PAUSE`:return`paused`;case`FINISH`:return`finished`;case`FAILED`:return`finished`;default:return`idle`}}function mke(e,t){if(t)return t;switch(e){case`RUNNING`:return`Printing`;case`PAUSE`:return`Paused`;case`FINISH`:return`Finished`;case`FAILED`:return`Failed`;case`IDLE`:return`Idle`;default:return e?e.charAt(0)+e.slice(1).toLowerCase():`Idle`}}var hke=new Set([`X1C`,`X1`,`X1E`,`X2D`,`P1S`,`P2S`,`H2D`,`H2D Pro`,`H2C`,`H2S`]),gke=new Set([`P2S`,`X2D`]);function vG(e){return e?{O1D:`H2D`,O1E:`H2D Pro`,O2D:`H2D Pro`,O1C:`H2C`,O1C2:`H2C`,O1S:`H2S`,"BL-P001":`X1C`,"BL-P002":`X1`,"BL-P003":`X1E`,N6:`X2D`,N9:`A2L`,C11:`P1S`,C12:`P1P`,C13:`P2S`,N2S:`A1`,N1:`A1 Mini`,X1C:`X1C`,X1:`X1`,X1E:`X1E`,X2D:`X2D`,P1S:`P1S`,P1P:`P1P`,P2S:`P2S`,A1:`A1`,"A1 Mini":`A1 Mini`,A2L:`A2L`,H2D:`H2D`,"H2D Pro":`H2D Pro`,H2C:`H2C`,H2S:`H2S`}[e]||e:``}function yG({ams:e,printerId:t,label:n,amsLabels:r,canEdit:i,onSaved:a,children:o}){let{t:s}=U(),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(`top`),[f,p]=(0,y.useState)(``),[m,h]=(0,y.useState)(!1),[g,_]=(0,y.useState)(null),[v,b]=(0,y.useState)(!1),x=(0,y.useRef)(null),S=(0,y.useRef)(null),C=(0,y.useRef)(null);(0,y.useEffect)(()=>{c&&(p(r?.[e.id]??``),_(null),requestAnimationFrame(()=>{if(x.current&&S.current){let e=x.current.getBoundingClientRect(),t=e.top-56,n=window.innerHeight-e.bottom;d(t<S.current.offsetHeight+12&&n>t?`bottom`:`top`)}}))},[c,r,e.id]);let w=()=>{C.current&&clearTimeout(C.current),C.current=setTimeout(()=>l(!0),80)},T=()=>{C.current&&clearTimeout(C.current),v||(C.current=setTimeout(()=>l(!1),200))};(0,y.useEffect)(()=>()=>{C.current&&clearTimeout(C.current)},[]);let E=async()=>{if(i){h(!0),_(null);try{let n=f.trim();n?await Z.saveAmsLabel(t,e.id,n,e.serial_number):await Z.deleteAmsLabel(t,e.id,e.serial_number),a(),l(!1)}catch(e){_(e instanceof Error?e.message:String(e))}finally{h(!1)}}};return(0,G.jsxs)(`div`,{ref:x,className:`relative inline-block`,onMouseEnter:w,onMouseLeave:T,children:[o,c&&(0,G.jsx)(`div`,{ref:S,className:`
             absolute left-0 z-50
             ${u===`top`?`bottom-full mb-2`:`top-full mt-2`}
             animate-in fade-in-0 zoom-in-95 duration-150
-          `,style:{maxWidth:`calc(100vw - 24px)`},onMouseEnter:w,onMouseLeave:T,children:(0,G.jsxs)(`div`,{className:`w-52 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl overflow-hidden backdrop-blur-sm p-2.5 space-y-2`,children:[(0,G.jsx)(`div`,{className:`text-[length:var(--pc-t10,10px)] uppercase tracking-wider text-bambu-gray font-medium`,children:n}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] tracking-wide text-bambu-gray font-medium shrink-0`,children:s(`printers.amsPopup.serialNumber`)}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-white font-mono truncate`,children:e.serial_number||`—`})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] tracking-wide text-bambu-gray font-medium shrink-0`,children:s(`printers.amsPopup.firmwareVersion`)}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-white font-mono truncate`,children:e.sw_ver||`—`})]}),(0,G.jsxs)(`div`,{className:`space-y-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray font-medium shrink-0`,children:s(`printers.amsPopup.friendlyName`)}),(0,G.jsx)(`div`,{className:`flex-1 h-[2px] bg-bambu-dark-tertiary/50`})]}),(0,G.jsx)(`input`,{type:`text`,value:f,onChange:e=>i&&p(e.target.value),onKeyDown:e=>e.key===`Enter`&&E(),onFocus:()=>b(!0),onBlur:()=>{b(!1),C.current&&clearTimeout(C.current),C.current=setTimeout(()=>l(!1),200)},placeholder:i?s(`printers.amsPopup.friendlyNamePlaceholder`):r?.[e.id]||`—`,disabled:!i,title:i?void 0:s(`printers.amsPopup.noEditPermission`),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-2 py-1 text-xs text-white placeholder-bambu-gray/60 focus:outline-none focus:border-bambu-green disabled:opacity-50 disabled:cursor-not-allowed`,maxLength:100}),i&&(0,G.jsxs)(`div`,{className:`space-y-1`,children:[g&&(0,G.jsx)(`p`,{className:`text-[length:var(--pc-t10,10px)] text-red-700 dark:text-red-400 break-words`,children:g}),(0,G.jsxs)(`div`,{className:`flex gap-1 justify-end`,children:[(0,G.jsx)(`button`,{onClick:E,disabled:m,className:`px-2 py-0.5 text-[length:var(--pc-t10,10px)] bg-bambu-green text-white rounded hover:bg-bambu-green/80 disabled:opacity-50`,children:s(`printers.amsPopup.save`)}),r?.[e.id]&&(0,G.jsx)(`button`,{onClick:async()=>{if(i){h(!0),_(null);try{await Z.deleteAmsLabel(t,e.id,e.serial_number),a(),l(!1)}catch(e){_(e instanceof Error?e.message:String(e))}finally{h(!1)}}},disabled:m,className:`px-2 py-0.5 text-[length:var(--pc-t10,10px)] bg-bambu-dark-tertiary text-bambu-gray rounded hover:bg-bambu-dark-tertiary/70 disabled:opacity-50`,children:s(`printers.amsPopup.clear`)})]})]})]})]})})]})}var _G={PLA:{n3f:45,n3s:45,n3f_hours:12,n3s_hours:12},PETG:{n3f:65,n3s:65,n3f_hours:12,n3s_hours:12},TPU:{n3f:65,n3s:75,n3f_hours:12,n3s_hours:18},ABS:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},ASA:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},PA:{n3f:65,n3s:85,n3f_hours:12,n3s_hours:12},PC:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},PVA:{n3f:65,n3s:85,n3f_hours:12,n3s_hours:18}},vG={1:1,2:1,3:1.2,4:1.4};function gke(e){let t=vG[e]??1,n=e=>`${Math.round(e*t*10)/10}px`;return{"--pc-t8":n(8),"--pc-t9":n(9),"--pc-t10":n(10),"--pc-t11":n(11),"--pc-i2":n(8),"--pc-i25":n(10),"--pc-i3":n(12),"--pc-i35":n(14),"--pc-i4":n(16),"--pc-i5":n(20),"--pc-i7":n(28)}}function _ke({printerId:e,dryingActive:t,timeFormat:n}){let{t:r}=U(),i=co(),{showToast:a}=Gd(),{data:o=[]}=K({queryKey:YW,queryFn:()=>Z.listScheduledDryings(),refetchInterval:3e4});(0,y.useEffect)(()=>{t&&i.invalidateQueries({queryKey:YW})},[t,i]);let s=q({mutationFn:e=>Z.cancelScheduledDrying(e),onSuccess:()=>i.invalidateQueries({queryKey:YW}),onError:e=>a(e.message||r(`printers.drying.scheduleFailed`),`error`)}),c=o.filter(t=>t.printer_id===e&&(t.status===`pending`||t.status===`failed`));return c.length===0?null:(0,G.jsx)(`div`,{className:`mt-2 space-y-1`,children:c.map(e=>{let t=e.status===`failed`,i=JOe(e.waiting_reason);return(0,G.jsxs)(`div`,{"data-testid":t?`scheduled-drying-failed`:`scheduled-drying-pending`,className:`flex items-center justify-between px-2 py-1 rounded-lg text-[length:var(--pc-t11,11px)] ${t?`bg-red-500/10 border border-red-500/30`:`bg-amber-500/10 border border-amber-500/30`}`,children:[(0,G.jsx)(`span`,{className:t?`text-red-700 dark:text-red-400`:`text-amber-700 dark:text-amber-400`,children:t?r(`printers.drying.scheduleFailedReason`,{reason:e.error_message||r(`printers.drying.scheduleFailedUnknown`)}):(0,G.jsxs)(G.Fragment,{children:[e.start_after?r(`printers.drying.scheduledFor`,{time:rp(e.start_after,n)}):r(`printers.drying.scheduledAsap`),i&&(0,G.jsx)(`span`,{className:`ml-1 opacity-80`,children:r(i)})]})}),(0,G.jsx)(`button`,{onClick:()=>s.mutate(e.id),disabled:s.isPending,title:r(t?`printers.drying.dismissFailed`:`printers.drying.cancelScheduled`),className:`text-bambu-gray hover:text-red-400 transition-colors disabled:opacity-50 disabled:cursor-not-allowed`,children:(0,G.jsx)(td,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`})})]},e.id)})})}function yG({printer:e,hideIfDisconnected:t,maintenanceInfo:n,viewMode:r=`expanded`,cardSize:i=2,amsThresholds:a,spoolmanEnabled:o=!1,linkedSpools:s,spoolmanUrl:c,spoolmanSyncMode:l,onGetAssignment:u,onUnassignSpool:d,spoolmanSpools:f,spoolmanSlotAssignments:p,spoolmanLoading:m=!1,onUnassignSpoolmanSpool:h,timeFormat:g=`system`,cameraViewMode:_=`window`,onOpenEmbeddedCamera:v,onSelectCameraViewMode:b,checkPrinterFirmware:x=!0,dryingPresets:S=_G,requirePlateClear:C=!1,selectionMode:w=!1,isSelected:T=!1,onToggleSelect:E,onOpenCompactCard:D,nozzleTempPresets:O=bm,bedTempPresets:k=xm,chamberTempPresets:A=Sm,fanSpeedPresets:j=Cm,aiDetectionEnabled:M=!1,aiDetection:N,aiLastError:P=null}){let{t:F}=U(),I=co(),L=or(),{showToast:R}=Gd(),{hasPermission:z}=jd(),[B,V]=(0,y.useState)(!1),[ee,te]=(0,y.useState)(!1),[ne,re]=(0,y.useState)(!0),[ie,ae]=(0,y.useState)(!1),[oe,se]=(0,y.useState)(!1),[H,ce]=(0,y.useState)(!1),[le,ue]=(0,y.useState)(!1),[de,fe]=(0,y.useState)(!1),[pe,me]=(0,y.useState)(null),[he,ge]=(0,y.useState)(!1),[_e,ve]=(0,y.useState)(!1),[ye,be]=(0,y.useState)(!1),[xe,Se]=(0,y.useState)(()=>Pee(e.id)),Ce=(0,y.useCallback)(()=>{Se(t=>{let n=!t;return Fee(e.id,n),n})},[e.id]),[we,Te]=(0,y.useState)(!1),[Ee,De]=(0,y.useState)(!1),[Oe,ke]=(0,y.useState)(null),[Ae,je]=(0,y.useState)(null),[Me,Ne]=(0,y.useState)(null),[Pe,Fe]=(0,y.useState)(null),[Ie,Le]=(0,y.useState)(10),[Re,ze]=(0,y.useState)(!1),[Be,Ve]=(0,y.useState)(!1),[He,Ue]=(0,y.useState)(!1),[We,Ge]=(0,y.useState)(!1),[Ke,qe]=(0,y.useState)(!1),Je=(0,y.useCallback)(()=>Ge(!1),[]),[Ye,Xe]=(0,y.useState)(null),[Ze,Qe]=(0,y.useState)(null),[$e,et]=(0,y.useState)(`n3f`),[tt,nt]=(0,y.useState)(`PLA`),[rt,it]=(0,y.useState)(50),[at,ot]=(0,y.useState)(4),[st,ct]=(0,y.useState)(!1),[lt,ut]=(0,y.useState)(`now`),[dt,ft]=(0,y.useState)(120),[pt,mt]=(0,y.useState)(``),[ht,gt]=(0,y.useState)(null),[_t,vt]=(0,y.useState)(null),yt=(0,y.useCallback)((e,t)=>{let n=Mee(e.tray.find(e=>e.tray_type)?.tray_type,S),r=S[n]??_G.PLA,i=e.module_type;nt(n),it(r[i]||r.n3f),ot(i===`n3s`?r.n3s_hours:r.n3f_hours),ct(!1),ut(`now`),ft(120),mt(``),et(e.module_type),Qe(e.id),vt(t)},[S]);(0,y.useLayoutEffect)(()=>{if(Ze===null||!_t)return;let e=()=>{gt(um({triggerRect:_t.getBoundingClientRect(),popoverWidth:WOe,estimatedHeight:GOe,horizontalAlign:`center`}))};return e(),window.addEventListener(`resize`,e),window.addEventListener(`scroll`,e,!0),()=>{window.removeEventListener(`resize`,e),window.removeEventListener(`scroll`,e,!0)}},[Ze,_t]);let bt=(0,y.useRef)(null),xt=(0,y.useRef)(!1),[St,Ct]=(0,y.useState)(null),[wt,Tt]=(0,y.useState)(!1),[Et,Dt]=(0,y.useState)(!1),Ot=(0,y.useRef)(null),[kt,At]=(0,y.useState)(null),jt=(0,y.useRef)(0),[Mt,Nt]=(0,y.useState)(null),[Pt,Ft]=(0,y.useState)(null),[It,Lt]=(0,y.useState)(null),[Rt,zt]=(0,y.useState)(null),[Bt,Vt]=(0,y.useState)(null),[Ht,Ut]=(0,y.useState)(!1),[Wt,Gt]=(0,y.useState)(null),[Kt,qt]=(0,y.useState)(!1),[Jt,Yt]=(0,y.useState)(!1),[Xt,Zt]=(0,y.useState)(null),[Qt,$t]=(0,y.useState)(!1),[en,tn]=(0,y.useState)(!1),{data:W}=K({queryKey:[`printerStatus`,e.id],queryFn:()=>Z.getPrinterStatus(e.id),refetchInterval:3e4}),{data:nn}=K({queryKey:[`firmwareUpdate`,e.id],queryFn:()=>Td.checkPrinterUpdate(e.id),staleTime:300*1e3,refetchInterval:300*1e3,enabled:x&&z(`firmware:read`)}),rn=(0,y.useMemo)(()=>{let e=new Set;if(W?.ams)for(let t of W.ams)for(let n of t.tray||[])n.tray_info_idx&&e.add(n.tray_info_idx);for(let t of W?.vt_tray??[])t.tray_info_idx&&e.add(t.tray_info_idx);if(W?.nozzle_rack)for(let t of W.nozzle_rack)t.filament_id&&e.add(t.filament_id);return Array.from(e)},[W?.ams,W?.vt_tray,W?.nozzle_rack]),an=(0,y.useMemo)(()=>{let e=new Set;if(W?.ams)for(let t of W.ams)for(let n of t.tray||[])n.tray_type&&e.add(n.tray_type.toUpperCase());for(let t of W?.vt_tray??[])t.tray_type&&e.add(t.tray_type.toUpperCase());return e},[W?.ams,W?.vt_tray]),on=(0,y.useMemo)(()=>{let e=new Set;if(W?.ams){for(let t of W.ams)for(let n of t.tray||[])if(n.tray_type&&n.tray_color){let t=n.tray_color.replace(`#`,``).toLowerCase().slice(0,6);e.add(`${n.tray_type.toUpperCase()}:${t}`)}}for(let t of W?.vt_tray??[])if(t.tray_type&&t.tray_color){let n=t.tray_color.replace(`#`,``).toLowerCase().slice(0,6);e.add(`${t.tray_type.toUpperCase()}:${n}`)}return e},[W?.ams,W?.vt_tray]),sn=(0,y.useMemo)(()=>{let e=new Set;if(W?.ams){for(let t of W.ams)for(let n of t.tray||[])if(n.tray_type&&n.tray_color){let t=n.tray_color.replace(`#`,``).toLowerCase().slice(0,6);e.add(`${n.tray_type.toUpperCase()}:${t}:${n.tray_info_idx||``}`)}}for(let t of W?.vt_tray??[])if(t.tray_type&&t.tray_color){let n=t.tray_color.replace(`#`,``).toLowerCase().slice(0,6);e.add(`${t.tray_type.toUpperCase()}:${n}:${t.tray_info_idx||``}`)}return e},[W?.ams,W?.vt_tray]),{data:cn}=K({queryKey:[`filamentInfo`,rn],queryFn:()=>Z.getFilamentInfo(rn),enabled:rn.length>0,staleTime:300*1e3}),{data:ln}=K({queryKey:[`slotPresets`,e.id],queryFn:()=>Z.getSlotPresets(e.id),staleTime:120*1e3}),un=W?.state===`RUNNING`||W?.state===`PAUSE`?W?.current_archive_id??null:null,{data:dn}=K({queryKey:[`archive-plates`,un],queryFn:()=>Z.getArchivePlates(un),enabled:un!=null,staleTime:300*1e3}),fn=!dn?.is_multi_plate||W?.current_plate_id==null?null:dn.plates.find(e=>e.index===W.current_plate_id)?.name||F(`printers.plateNumber`,`Plate {{number}}`,{number:W.current_plate_id}),{data:pn,refetch:mn}=K({queryKey:[`amsLabels`,e.id],queryFn:()=>Z.getAmsLabels(e.id),staleTime:300*1e3}),[hn,gn]=(0,y.useState)(null);(0,y.useEffect)(()=>{W?.wifi_signal!=null&&gn(W.wifi_signal)},[W?.wifi_signal]);let _n=W?.wifi_signal??hn,vn=(0,y.useRef)(void 0);(0,y.useEffect)(()=>{W?.connected!==void 0&&(vn.current=W.connected)},[W?.connected]);let yn=W?.connected??vn.current,bn=(0,y.useRef)({});(0,y.useEffect)(()=>{W?.ams_extruder_map&&Object.keys(W.ams_extruder_map).length>0&&(bn.current=W.ams_extruder_map)},[W?.ams_extruder_map]);let xn=W?.ams_extruder_map&&Object.keys(W.ams_extruder_map).length>0?W.ams_extruder_map:bn.current,Sn=(0,y.useRef)({});(0,y.useEffect)(()=>{W?.ams_switch_inlet&&Object.keys(W.ams_switch_inlet).length>0&&(Sn.current=W.ams_switch_inlet)},[W?.ams_switch_inlet]);let Cn=W?.fila_switch?.installed===!0,wn=W?.ams_switch_inlet&&Object.keys(W.ams_switch_inlet).length>0?W.ams_switch_inlet:Sn.current,Tn=(0,y.useRef)([]);(0,y.useEffect)(()=>{W?.ams&&W.ams.length>0&&(Tn.current=W.ams)},[W?.ams]);let En=W?.ams&&W.ams.length>0?W.ams:Tn.current,Dn=En.some(e=>e.tray.some(e=>e.k))||(W?.vt_tray??[]).some(e=>e.k);(0,y.useEffect)(()=>{if(!St)return;let e=En.find(e=>e.id===St.amsId);e&&(e.dry_time>0||e.dry_status>0)&&Ct(null)},[St,En]),(0,y.useEffect)(()=>{if(!St)return;let e=setTimeout(()=>{Ct(null),R(F(`printers.drying.toastNotStarted`),`error`)},cke);return()=>clearTimeout(e)},[St,R,F]);let On=(0,y.useRef)(void 0),kn=W?.tray_now;kn!==void 0&&kn!==255?On.current=kn:kn===255&&(On.current=void 0);let An=kn!==void 0&&kn!==255?kn:On.current,jn=W?.expected_tray??null,Mn=W?.previous_tray??null,Nn=e=>{if(e===null)return null;if(e===254)return F(`printers.expectedSlot.external`);if(e>=128&&e<=135)return pn?.[e]||gp(e,1);let t=Math.floor(e/4),n=e%4;return F(`printers.expectedSlot.label`,{ams:pn?.[t]||gp(t,4),slot:n+1})},Pn=W?.state===`PAUSE`?{expectedSlotLabel:Nn(jn),ranOutSlotLabel:Nn(Mn)}:null,{data:Fn}=K({queryKey:[`smartPlugByPrinter`,e.id],queryFn:()=>Z.getSmartPlugByPrinter(e.id)}),{data:In}=K({queryKey:[`scriptPlugsByPrinter`,e.id],queryFn:()=>Z.getScriptPlugsByPrinter(e.id)}),{data:Ln}=K({queryKey:[`smartPlugStatus`,Fn?.id],queryFn:()=>Fn?Z.getSmartPlugStatus(Fn.id):null,enabled:!!Fn,refetchInterval:1e4}),{data:Rn}=K({queryKey:[`queue`,e.id,`pending`],queryFn:()=>Z.getQueue(e.id,`pending`)}),zn=(0,y.useMemo)(()=>Rn?.length?ym(Rn,an,on,sn).length:0,[Rn,an,on,sn]),{data:Bn}=K({queryKey:[`queue`,e.id,`printing`],queryFn:()=>Z.getQueue(e.id,`printing`),enabled:W?.state===`RUNNING`}),{data:Vn}=K({queryKey:[`currentPrintUser`,e.id],queryFn:()=>Z.getCurrentPrintUser(e.id),enabled:W?.state===`RUNNING`}),Hn=Bn?.[0]?.created_by_username||Vn?.username,{data:Un}=K({queryKey:[`archives`,e.id,`last`],queryFn:()=>Z.getArchives(e.id,1,0),enabled:W?.connected&&W?.state!==`RUNNING`}),Wn=Un?.[0],Gn=W?.state===`RUNNING`||W?.state===`PAUSE`,Kn=C&&W?.awaiting_plate_clear===!0,qn=Kn&&!Gn,Jn=W?.current_print&&Gn?wee(W.subtask_name||W.current_print||null,W.gcode_file,F,fn):null,[Yn,Xn]=(0,y.useState)(null);(0,y.useEffect)(()=>{Jn?Xn({name:Jn,coverUrl:W?.cover_url??null}):Kn||Xn(null)},[Jn,Kn,W?.cover_url]);let Zn=!C||!W?.connected?null:Gn?{label:F(`printers.plateStatus.inUse`),className:`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`}:W.awaiting_plate_clear?{label:F(`printers.plateStatus.notCleared`),className:`bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`}:{label:F(`printers.plateStatus.cleared`),className:`bg-status-ok/20 text-status-ok`},Qn=Zn?(0,G.jsx)(`span`,{className:`inline-flex flex-shrink-0 items-center rounded-full px-2 py-0.5 text-[length:var(--pc-t10,10px)] font-medium ${Zn.className}`,children:Zn.label}):null,$n=t&&yn===!1,er=q({mutationFn:t=>Z.deletePrinter(e.id,t.deleteArchives),onSuccess:()=>{I.invalidateQueries({queryKey:[`printers`]}),I.invalidateQueries({queryKey:[`archives`]}),I.invalidateQueries({queryKey:[`maintenanceOverview`]})},onError:e=>R(e.message||F(`printers.toast.failedToDelete`),`error`)}),tr=q({mutationFn:()=>Z.connectPrinter(e.id),onSuccess:()=>{I.invalidateQueries({queryKey:[`printerStatus`,e.id]})}}),nr=q({mutationFn:()=>Z.refreshPrinterStatus(e.id),onSuccess:()=>{I.invalidateQueries({queryKey:[`printerStatus`,e.id]}),R(F(`printers.forceRefreshSuccess`),`success`)},onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),rr=q({mutationFn:e=>Z.unlinkSpool(e),onSuccess:e=>{R(F(`spoolman.unlinkSuccess`)||e?.message,`success`),I.invalidateQueries({queryKey:[`linked-spools`]}),I.invalidateQueries({queryKey:[`unlinked-spools`]}),I.invalidateQueries({queryKey:[`spoolman-slot-assignments`]})},onError:e=>{R(e.message||F(`spoolman.unlinkFailed`),`error`)}}),ir=q({mutationFn:({amsId:t,temp:n,duration:r,filament:i,rotateTray:a})=>Z.startDrying(e.id,t,n,r,i,a),onSuccess:(t,{amsId:n})=>{Qe(null),Ct({amsId:n}),R(F(`printers.drying.toastCommandSent`),`success`),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})},onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),ar=q({mutationFn:t=>Z.createScheduledDrying({printer_id:e.id,ams_id:t.amsId,temp:t.temp,duration_hours:t.duration,filament:t.filament,rotate_tray:t.rotateTray,start_after:t.startAfter}),onSuccess:()=>{I.invalidateQueries({queryKey:YW}),Qe(null)},onError:e=>R(e.message||F(`printers.drying.scheduleFailed`),`error`)}),sr=q({mutationFn:t=>Z.stopDrying(e.id,t),onSuccess:()=>{Ct(null),R(F(`printers.drying.toastStopped`),`success`),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})},onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),cr=q({mutationFn:t=>Z.setAmsFilamentBackup(e.id,t),onSuccess:(t,n)=>{I.invalidateQueries({queryKey:[`printerStatus`,e.id]}),I.invalidateQueries({queryKey:[`printer-status`,e.id]}),R(F(n?`printers.amsBackup.toastEnabled`:`printers.amsBackup.toastDisabled`),`success`)},onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),lr=q({mutationFn:e=>Fn?Z.controlSmartPlug(Fn.id,e):Promise.reject(`No plug`),onSuccess:()=>{I.invalidateQueries({queryKey:[`smartPlugStatus`,Fn?.id]})}}),ur=q({mutationFn:e=>Fn?Z.updateSmartPlug(Fn.id,{auto_off:e}):Promise.reject(`No plug`),onSuccess:()=>{I.invalidateQueries({queryKey:[`smartPlugByPrinter`,e.id]}),I.invalidateQueries({queryKey:[`smart-plugs`]})}}),dr=q({mutationFn:({id:e,action:t})=>Z.controlSmartPlug(e,t),onSuccess:()=>{R(F(`printers.toast.scriptTriggered`))},onError:e=>R(e.message||F(`printers.toast.failedToRunScript`),`error`)}),fr=q({mutationFn:()=>Z.stopPrint(e.id),onSuccess:()=>{R(F(`printers.toast.printStopped`)),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})},onError:e=>R(e.message||F(`printers.toast.failedToStopPrint`),`error`)}),pr=q({mutationFn:()=>Z.pausePrint(e.id),onSuccess:()=>{R(F(`printers.toast.printPaused`)),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})},onError:e=>R(e.message||F(`printers.toast.failedToPausePrint`),`error`)}),mr=q({mutationFn:()=>Z.resumePrint(e.id),onSuccess:()=>{R(F(`printers.toast.printResumed`)),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})},onError:e=>R(e.message||F(`printers.toast.failedToResumePrint`),`error`)}),hr=q({mutationFn:()=>Z.clearPlate(e.id),onSuccess:()=>{R(F(`queue.clearPlateSuccess`)),I.setQueryData([`printerStatus`,e.id],e=>e&&{...e,awaiting_plate_clear:!1}),I.invalidateQueries({queryKey:[`printerStatus`,e.id]}),I.invalidateQueries({queryKey:[`queue`,e.id]})},onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),gr=(0,G.jsxs)(`button`,{type:`button`,onClick:()=>hr.mutate(),disabled:hr.isPending||!z(`printers:clear_plate`),className:`mt-2 w-full inline-flex items-center justify-center gap-2 px-3 py-1.5 rounded-lg bg-yellow-100 dark:bg-yellow-500/20 border border-yellow-300 dark:border-yellow-400/40 text-yellow-700 dark:text-yellow-400 hover:bg-yellow-500/30 transition-colors text-xs font-medium disabled:opacity-50`,title:z(`printers:clear_plate`)?F(`printers.plateStatus.markCleared`):F(`printers.permission.noControl`),children:[hr.isPending?(0,G.jsx)(Y,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] animate-spin`}):(0,G.jsx)(vW,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`}),F(`printers.plateStatus.markCleared`)]}),_r=q({mutationFn:({target:t,nozzle:n})=>Z.setNozzleTemperature(e.id,t,n),onSuccess:t=>{Fe(null),R(t.message),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})},onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),vr=q({mutationFn:t=>Z.setBedTemperature(e.id,t),onSuccess:t=>{Fe(null),R(t.message),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})},onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),yr=q({mutationFn:t=>Z.setChamberTemperature(e.id,t),onSuccess:t=>{Fe(null),R(t.message),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})},onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),br=q({mutationFn:({fan:t,speed:n})=>Z.setFanSpeed(e.id,t,n),onMutate:async({fan:t,speed:n})=>{await I.cancelQueries({queryKey:[`printerStatus`,e.id]});let r=I.getQueryData([`printerStatus`,e.id]),i={part:`cooling_fan_speed`,aux:`big_fan1_speed`,aux2:`left_aux_fan_speed`,chamber:`big_fan2_speed`}[t];return I.setQueryData([`printerStatus`,e.id],e=>e&&{...e,[i]:n}),{previousStatus:r}},onSuccess:t=>{Fe(null),R(t.message),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})},onError:(t,n,r)=>{r?.previousStatus&&I.setQueryData([`printerStatus`,e.id],r.previousStatus),R(t.message||F(`printers.toast.failedToSendCommand`),`error`)}}),xr=q({mutationFn:t=>Z.selectExtruder(e.id,t),onMutate:async t=>{await I.cancelQueries({queryKey:[`printerStatus`,e.id]});let n=I.getQueryData([`printerStatus`,e.id]);return I.setQueryData([`printerStatus`,e.id],e=>e&&{...e,active_extruder:t}),{previousStatus:n}},onSuccess:t=>{Fe(null),R(t.message),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})},onError:(t,n,r)=>{r?.previousStatus&&I.setQueryData([`printerStatus`,e.id],r.previousStatus),R(t.message||F(`printers.toast.failedToSendCommand`),`error`)}}),Sr=q({mutationFn:t=>Z.setChamberLight(e.id,t),onMutate:async t=>{await I.cancelQueries({queryKey:[`printerStatus`,e.id]});let n=I.getQueryData([`printerStatus`,e.id]);return I.setQueryData([`printerStatus`,e.id],e=>({...e,chamber_light:t})),{previousStatus:n}},onSuccess:(e,t)=>{R(`Chamber light ${t?`on`:`off`}`)},onError:(t,n,r)=>{r?.previousStatus&&I.setQueryData([`printerStatus`,e.id],r.previousStatus),R(t.message||F(`printers.toast.failedToControlChamberLight`),`error`)}}),Cr=q({mutationFn:t=>Z.setPrintSpeed(e.id,t),onMutate:async t=>{await I.cancelQueries({queryKey:[`printerStatus`,e.id]});let n=I.getQueryData([`printerStatus`,e.id]);return I.setQueryData([`printerStatus`,e.id],e=>({...e,speed_level:t})),{previousStatus:n}},onError:(t,n,r)=>{r?.previousStatus&&I.setQueryData([`printerStatus`,e.id],r.previousStatus),R(t.message||F(`printers.toast.failedToSetSpeed`),`error`)}}),wr=q({mutationFn:t=>Z.setAirductMode(e.id,t),onMutate:async t=>{await I.cancelQueries({queryKey:[`printerStatus`,e.id]});let n=I.getQueryData([`printerStatus`,e.id]);return I.setQueryData([`printerStatus`,e.id],e=>({...e,airduct_mode:t===`cooling`?0:1})),{previousStatus:n}},onError:(t,n,r)=>{r?.previousStatus&&I.setQueryData([`printerStatus`,e.id],r.previousStatus),R(t.message||F(`printers.toast.failedToSendCommand`),`error`)}}),Tr=q({mutationFn:({distance:t})=>Z.bedJog(e.id,t),onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),Er=q({mutationFn:({x:t,y:n})=>Z.xyJog(e.id,t,n),onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),Dr=q({mutationFn:t=>Z.extruderJog(e.id,t),onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),Or=q({mutationFn:t=>Z.homeAxes(e.id,t),onSuccess:()=>{R(F(`printers.bedJog.homingStarted`))},onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),kr=q({mutationFn:t=>Z.updatePrinter(e.id,{plate_detection_enabled:t}),onSuccess:()=>{I.invalidateQueries({queryKey:[`printers`]}),R(kr.variables?F(`printers.toast.plateCheckEnabled`):F(`printers.toast.plateCheckDisabled`))},onError:e=>R(e.message||F(`printers.toast.failedToUpdateSetting`),`error`)}),Ar=q({mutationFn:t=>Z.updatePrinter(e.id,{is_active:t}),onSuccess:(t,n)=>{I.invalidateQueries({queryKey:[`printers`]}),I.invalidateQueries({queryKey:[`printerStatus`,e.id]}),R(F(n?`printers.maintenance.toastExited`:`printers.maintenance.toastEntered`,{name:e.name}),`success`)},onError:e=>R(e.message||F(`printers.toast.failedToUpdateSetting`),`error`)}),[jr,Mr]=(0,y.useState)(!1),Nr=()=>{W?.state===`RUNNING`||W?.state===`PAUSE`?Mr(!0):Ar.mutate(!1)},Pr=(W?.state===`RUNNING`||W?.state===`PAUSE`)&&(W?.printable_objects_count??0)>=2,{data:Fr}=K({queryKey:[`printableObjects`,e.id],queryFn:()=>Z.getPrintableObjects(e.id),enabled:Be||Pr,refetchInterval:Be?5e3:Pr?3e4:!1}),[Ir,Lr]=(0,y.useState)(null),Rr=(0,y.useRef)(!1),zr=(0,y.useRef)(null),Br=(0,y.useRef)(!1),Vr=q({mutationFn:({amsId:t,slotId:n})=>Z.refreshAmsSlot(e.id,t,n),onMutate:({amsId:e,slotId:t})=>{zr.current&&clearTimeout(zr.current),Rr.current=!1,Br.current=!1,Lr({amsId:e,slotId:t}),setTimeout(()=>{Br.current=!0},2e3),zr.current=setTimeout(()=>{Lr(null)},3e4)},onSuccess:e=>{R(e.message||F(`printers.toast.rfidRereadInitiated`))},onError:e=>{R(e.message||F(`printers.toast.failedToRereadRfid`),`error`),zr.current&&clearTimeout(zr.current),Lr(null)}}),Hr=q({mutationFn:({trayId:t,extruderId:n})=>Z.loadAmsTray(e.id,t,n),onSuccess:e=>{Gr(null),R(e.message||F(`printers.toast.loadInitiated`))},onError:e=>{Gr(null),R(e.message||F(`printers.toast.failedToLoad`),`error`)}}),Ur=q({mutationFn:({trayId:t})=>Z.unloadAms(e.id,t),onSuccess:e=>{R(e.message||F(`printers.toast.unloadInitiated`))},onError:e=>{R(e.message||F(`printers.toast.failedToUnload`),`error`)}}),[Wr,Gr]=(0,y.useState)(null),Kr=!!W?.fila_switch?.installed,qr=(e,t,n)=>{if(!Kr||e===255||e>=128){Hr.mutate({trayId:n});return}if(!W?.fila_switch?.ready){R(F(`printers.ams.switchNotReady`),`warning`);return}Gr({trayId:n,amsId:e,slotId:t,slotLabel:Op(e,t,!1,!1)})},[Jr,Yr]=(0,y.useState)(null),[Xr,Zr]=(0,y.useState)(null),Qr=async()=>{try{Yr(await Z.getPlateReferences(e.id))}catch{}},$r=()=>{kr.mutate(!e.plate_detection_enabled)},ei=async()=>{qt(!0),Gt(null);let t=W?.chamber_light===!1;tn(t),t&&(await Z.setChamberLight(e.id,!0),await new Promise(e=>setTimeout(e,2500)));try{Gt(await Z.checkPlateEmpty(e.id,{includeDebugImage:!0})),Qr()}catch(n){R(n instanceof Error?n.message:F(`printers.toast.failedToCheckPlate`),`error`),t&&(await Z.setChamberLight(e.id,!1),tn(!1))}finally{qt(!1)}},ti=(0,y.useCallback)(async()=>{Gt(null),en&&(await Z.setChamberLight(e.id,!1),tn(!1))},[en,e.id]),ni=async t=>{Yt(!0);try{let n=await Z.calibratePlateDetection(e.id,{label:t});n.success?(R(n.message||F(`printers.toast.calibrationSaved`),`success`),Qr(),Gt(await Z.checkPlateEmpty(e.id,{includeDebugImage:!0}))):R(n.message||F(`printers.toast.calibrationFailed`),`error`)}catch(e){R(e instanceof Error?e.message:F(`printers.toast.calibrationFailed`),`error`)}finally{Yt(!1)}},ri=async(t,n)=>{try{await Z.updatePlateReferenceLabel(e.id,t,n),Zr(null),Qr()}catch(e){R(e instanceof Error?e.message:F(`printers.toast.failedToUpdateLabel`),`error`)}},ii=async t=>{try{await Z.deletePlateReference(e.id,t),R(F(`printers.toast.referenceDeleted`),`success`),Qr(),Gt(await Z.checkPlateEmpty(e.id,{includeDebugImage:!0}))}catch(e){R(e instanceof Error?e.message:F(`printers.toast.failedToDeleteReference`),`error`)}},ai=async()=>{if(Xt){$t(!0);try{await Z.updatePrinter(e.id,{plate_detection_roi:Xt}),R(F(`printers.toast.detectionAreaSaved`),`success`),Zt(null),Gt(await Z.checkPlateEmpty(e.id,{includeDebugImage:!0}))}catch(e){R(e instanceof Error?e.message:F(`printers.toast.failedToSaveDetectionArea`),`error`)}finally{$t(!1)}}};(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&Wt&&ti()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[Wt,ti]);let oi=(0,y.useRef)(null);if((0,y.useEffect)(()=>{if(!Ir)return;let e=W?.ams_status_main??0;return e!==0&&(Rr.current=!0,oi.current&&=(clearTimeout(oi.current),null)),Rr.current&&e===0&&(Br.current?(zr.current&&clearTimeout(zr.current),Lr(null)):oi.current||=setTimeout(()=>{zr.current&&clearTimeout(zr.current),Lr(null)},2e3)),()=>{oi.current&&clearTimeout(oi.current)}},[W?.ams_status_main,Ir]),(0,y.useEffect)(()=>{if(!B)return;let e=e=>{let t=e.target;Ot.current?.contains(t)||V(!1)};return document.addEventListener(`mousedown`,e),()=>document.removeEventListener(`mousedown`,e)},[B]),$n)return null;let si=gke(i),ci=()=>{switch(i){case 1:return`w-10 h-10`;case 2:return`w-14 h-14`;case 3:return`w-16 h-16`;case 4:return`w-20 h-20`;default:return`w-14 h-14`}},li=()=>{switch(i){case 1:return`text-base truncate`;case 2:return`text-lg`;case 3:return`text-xl`;case 4:return`text-2xl`;default:return`text-lg`}},ui=()=>{switch(i){case 1:return`mb-2`;case 2:return`mb-4`;case 3:return`mb-5`;case 4:return`mb-6`;default:return`mb-4`}},di=z(`library:upload`)&&z(`queue:create`),fi=!vm(W),pi=e=>{e.preventDefault(),jt.current++,jt.current===1&&Tt(!0)},mi=e=>{e.preventDefault(),e.dataTransfer.dropEffect=di?`copy`:`none`},hi=e=>{e.preventDefault(),jt.current--,jt.current===0&&Tt(!1)},gi=async t=>{if(t.preventDefault(),jt.current=0,Tt(!1),!di)return;let n=Array.from(t.dataTransfer.files)[0];if(!n)return;let r=n.name.toLowerCase();if(!r.endsWith(`.gcode`)&&!r.includes(`.gcode.`)){R(F(`printers.dropNotPrintable`,`Only .gcode and .gcode.3mf files can be printed`),`error`);return}Dt(!0);try{let t=await Z.uploadLibraryFile(n,null),r=t.metadata?.sliced_for_model,i=hG(e.model);if(r&&i&&r.toLowerCase()!==i.toLowerCase()){await Z.deleteLibraryFile(t.id).catch(()=>{}),R(F(`printers.incompatibleFile`,`This file was sliced for {{slicedFor}}, but this printer is a {{printerModel}}`,{slicedFor:r,printerModel:i}),`error`);return}Xe({id:t.id,filename:t.filename})}catch{R(F(`common.uploadFailed`,`Upload failed`),`error`)}finally{Dt(!1)}},_i=t=>{r!==`compact`||w||t.target.closest(`button, a, input, select, textarea, [role="button"]`)||D?.(e.id)},vi=`!h-8 !min-h-8 !w-8 !px-0 !py-0`,yi=t=>{t===`embedded`&&v?v(e.id,e.name):fm(e.id)},bi=[{mode:`window`,icon:(0,G.jsx)(nc,{className:`w-4 h-4`}),label:F(`settings.newWindow`),title:F(`settings.cameraWindowDescription`)},{mode:`embedded`,icon:(0,G.jsx)(jl,{className:`w-4 h-4`}),label:F(`settings.embeddedOverlay`),title:F(`settings.cameraOverlayDescription`)}].map(({mode:e,icon:t,label:n,title:r})=>({icon:t,label:e===_?`${n} ✓`:n,title:r,onClick:()=>{b?.(e),yi(e)}})),xi=({amsId:e,slotId:t,loadTrayId:n,isRefreshing:r,includeRfid:i=!0})=>{let a=W?.state===`RUNNING`,o=e>=128&&e!==255?void 0:n;return(0,G.jsxs)(G.Fragment,{children:[i&&(0,G.jsxs)(`button`,{className:`w-full px-2 py-1.5 text-left text-xs flex items-center gap-2 rounded transition-colors ${z(`printers:ams_rfid`)?`text-white hover:bg-bambu-dark-tertiary`:`text-bambu-gray/50 cursor-not-allowed`}`,onClick:n=>{n.stopPropagation(),!(a||!z(`printers:ams_rfid`))&&Vr.mutate({amsId:e,slotId:t})},disabled:a||r||!z(`printers:ams_rfid`),title:a?F(`printers.bedJog.disabledWhilePrinting`):z(`printers:ams_rfid`)?void 0:F(`printers.permission.noAmsRfid`),children:[(0,G.jsx)(Vl,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] ${r?`animate-spin`:``}`}),F(`printers.rfid.reread`)]}),(0,G.jsxs)(`button`,{className:`w-full px-2 py-1.5 text-left text-xs flex items-center gap-2 rounded transition-colors ${z(`printers:control`)?`text-white hover:bg-bambu-dark-tertiary`:`text-bambu-gray/50 cursor-not-allowed`}`,onClick:r=>{r.stopPropagation(),!(a||!z(`printers:control`))&&qr(e,t,n)},disabled:a||!z(`printers:control`),title:a?F(`printers.bedJog.disabledWhilePrinting`):z(`printers:control`)?void 0:F(`printers.permission.noControl`),children:[(0,G.jsx)(nl,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),F(`printers.ams.load`)]}),(0,G.jsxs)(`button`,{className:`w-full px-2 py-1.5 text-left text-xs flex items-center gap-2 rounded transition-colors ${z(`printers:control`)?`text-white hover:bg-bambu-dark-tertiary`:`text-bambu-gray/50 cursor-not-allowed`}`,onClick:e=>{e.stopPropagation(),!(a||!z(`printers:control`))&&Ur.mutate({trayId:o})},disabled:a||!z(`printers:control`),title:a?F(`printers.bedJog.disabledWhilePrinting`):z(`printers:control`)?void 0:F(`printers.permission.noControl`),children:[(0,G.jsx)(rl,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),F(`printers.ams.unload`)]})]})},Si=(0,G.jsxs)(`div`,{ref:Ot,className:`relative flex-shrink-0`,children:[(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>V(!B),title:F(`common.more`,`More`),className:vi,children:(0,G.jsx)(Qs,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),B&&(0,G.jsxs)(`div`,{className:`absolute left-0 bottom-full mb-2 w-48 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg z-20`,children:[(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-sm flex items-center gap-2 ${z(`printers:update`)?`hover:bg-bambu-dark-tertiary`:`opacity-50 cursor-not-allowed`}`,onClick:()=>{z(`printers:update`)&&(ae(!0),V(!1))},title:z(`printers:update`)?void 0:F(`printers.permission.noEdit`),children:[(0,G.jsx)(kl,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`}),F(`common.edit`)]}),(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex items-center gap-2`,onClick:()=>{Ge(!0),V(!1)},children:[(0,G.jsx)(Uc,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`}),F(`printers.printerInformation`)]}),(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-sm flex items-center gap-2 ${z(`printers:update`)?`hover:bg-bambu-dark-tertiary`:`opacity-50 cursor-not-allowed`}`,disabled:Ar.isPending||!z(`printers:update`),onClick:()=>{z(`printers:update`)&&(V(!1),e.is_active===!1?Ar.mutate(!0):Nr())},title:z(`printers:update`)?void 0:F(`printers.permission.noEdit`),children:[(0,G.jsx)(ed,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`}),e.is_active===!1?F(`printers.maintenance.menuExit`):F(`printers.maintenance.menuEnter`)]}),(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex items-center gap-2`,onClick:()=>{tr.mutate(),V(!1)},children:[(0,G.jsx)(Vl,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`}),F(`printers.reconnect`)]}),(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex items-center gap-2 disabled:opacity-50`,disabled:nr.isPending,onClick:()=>{nr.mutate(),V(!1)},children:[(0,G.jsx)(Wl,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] ${nr.isPending?`animate-spin`:``}`}),F(`printers.forceRefresh`)]}),(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex items-center gap-2`,onClick:()=>{ce(!0),V(!1)},children:[(0,G.jsx)(Du,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`}),F(`printers.mqttDebug`)]}),(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex items-center gap-2`,onClick:()=>{qe(!0),V(!1)},children:[(0,G.jsx)(xu,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`}),F(`diagnostic.runButton`)]}),(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-sm flex items-center gap-2 ${z(`printers:delete`)?`text-red-700 dark:text-red-400 hover:bg-bambu-dark-tertiary`:`text-red-700/50 dark:text-red-400/50 cursor-not-allowed`}`,onClick:()=>{z(`printers:delete`)&&(te(!0),V(!1))},title:z(`printers:delete`)?void 0:F(`printers.permission.noDelete`),children:[(0,G.jsx)(Nu,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`}),F(`common.delete`)]})]})]});return(0,G.jsxs)(Ld,{id:`printer-card-${e.id}`,className:`relative flex h-full flex-col ${T?`ring-2 ring-bambu-green`:``} ${w||r===`compact`?`cursor-pointer`:``}`,style:si,onClick:_i,onDragEnter:pi,onDragOver:mi,onDragLeave:hi,onDrop:gi,children:[w&&(0,G.jsx)(`div`,{className:`absolute inset-0 z-20 flex items-start p-2`,onClick:t=>{t.stopPropagation(),E?.(e.id)},children:T?(0,G.jsx)(_u,{className:`w-[var(--pc-i5,1.25rem)] h-[var(--pc-i5,1.25rem)] text-bambu-green`}):(0,G.jsx)(yu,{className:`w-[var(--pc-i5,1.25rem)] h-[var(--pc-i5,1.25rem)] text-bambu-gray`})}),(wt||Et)&&(0,G.jsx)(`div`,{className:`absolute inset-0 z-10 rounded-xl border-2 border-dashed flex items-center justify-center transition-colors ${Et?`bg-bambu-green/10 border-bambu-green/50`:di?`bg-bambu-green/10 border-bambu-green`:`bg-red-50 dark:bg-red-500/10 border-red-300 dark:border-red-500/50`}`,children:(0,G.jsx)(`div`,{className:`text-center`,children:Et?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-8 h-8 mx-auto mb-2 text-bambu-green animate-spin`}),(0,G.jsx)(`p`,{className:`text-sm font-medium text-bambu-green`,children:F(`common.uploading`,`Uploading...`)})]}):di?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ll,{className:`w-8 h-8 mx-auto mb-2 text-bambu-green`}),(0,G.jsx)(`p`,{className:`text-sm font-medium text-bambu-green`,children:F(fi?`printers.dropToQueue`:`printers.dropToPrint`)})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(td,{className:`w-8 h-8 mx-auto mb-2 text-red-600 dark:text-red-400`}),(0,G.jsx)(`p`,{className:`text-sm font-medium text-red-700 dark:text-red-400`,children:z(`library:upload`)?F(`fileManager.noPermissionAddToQueue`):F(`fileManager.noPermissionUpload`)})]})})}),(0,G.jsxs)(zd,{className:`${i>=3?`p-5`:``} flex flex-1 flex-col`,children:[(0,G.jsxs)(`div`,{className:ui(),children:[(0,G.jsx)(`div`,{className:`flex items-start justify-between gap-2`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-3 min-w-0 flex-1`,children:[(0,G.jsx)(`img`,{src:hm(e.model),alt:e.model||F(`common.printer`),className:`object-contain rounded-lg flex-shrink-0 ${ci()}`}),(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex min-w-0 items-center gap-2`,children:[(0,G.jsx)(`h3`,{className:`font-semibold text-white ${li()}`,children:e.name}),r===`compact`&&(()=>{let e=W?.connected&&W.hms_errors?Dm(W.hms_errors):[],t=e.some(e=>e.severity<=2),n=e.length>0,r=W?.connected?t?`bg-status-error`:n?`bg-status-warning`:`bg-status-ok`:`bg-status-error`,i=W?.connected?n?`${e.length} HMS ${e.length===1?`error`:`errors`}`:F(`printers.connection.connected`):F(`printers.connection.offline`);return(0,G.jsx)(`div`,{className:`w-[var(--pc-i2,0.5rem)] h-[var(--pc-i2,0.5rem)] rounded-full flex-shrink-0 ${r}`,title:i})})()]}),r===`compact`&&qn&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>hr.mutate(),disabled:hr.isPending||!z(`printers:clear_plate`),"aria-label":F(`printers.plateStatus.markCleared`),className:`inline-flex h-5 w-5 flex-shrink-0 items-center justify-center rounded-md bg-yellow-100 dark:bg-yellow-500/20 border border-yellow-300 dark:border-yellow-400/40 text-yellow-700 dark:text-yellow-400 hover:bg-yellow-500/30 transition-colors disabled:opacity-50`,title:z(`printers:clear_plate`)?F(`printers.plateStatus.markCleared`):F(`printers.permission.noControl`),children:hr.isPending?(0,G.jsx)(Y,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] animate-spin`}):(0,G.jsx)(vW,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`})})]}),(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[e.model||`Unknown Model`,r===`expanded`&&Bp(W).length>0&&(0,G.jsxs)(`span`,{className:`ml-1.5 text-bambu-gray`,title:W?.nozzles?.[0]?.nozzle_type||`Nozzle`,children:[`• `,Bp(W).join(` / `),`mm`]}),r===`expanded`&&n&&n.total_print_hours>0&&(0,G.jsxs)(`span`,{className:`ml-2 text-bambu-gray`,children:[(0,G.jsx)(js,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] inline-block mr-1`}),Math.round(n.total_print_hours),`h`]})]})]})]})}),r===`expanded`&&(0,G.jsx)(`div`,{className:`mt-2`,children:(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2`,children:[e.is_active===!1?(0,G.jsxs)(`span`,{className:`flex items-center gap-1.5 px-2 py-1 rounded-full text-xs bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400`,title:F(`printers.maintenance.subtitle`),children:[(0,G.jsx)(ed,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),F(`printers.maintenance.pillLabel`)]}):(0,G.jsxs)(`span`,{className:`flex items-center gap-1.5 px-2 py-1 rounded-full text-xs ${W?.connected?`bg-status-ok/20 text-status-ok`:`bg-status-error/20 text-status-error`}`,children:[W?.connected?(0,G.jsx)(Xc,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}):(0,G.jsx)(zu,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),W?.connected?F(`printers.connection.connected`):F(`printers.connection.offline`)]}),e.is_active!==!1&&!W?.connected&&(0,G.jsxs)(`button`,{onClick:()=>qe(!0),className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs cursor-pointer bg-bambu-dark-tertiary text-bambu-gray hover:text-white transition-colors`,title:F(`diagnostic.runButton`),children:[(0,G.jsx)(xu,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),F(`diagnostic.runButton`)]}),W?.connected&&W?.wired_network&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs bg-status-ok/20 text-status-ok`,title:F(`printers.connection.ethernet`,`Ethernet`),children:[(0,G.jsx)(ts,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),F(`printers.connection.ethernet`,`Ethernet`)]}),W?.connected&&!W?.wired_network&&_n!=null&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs ${_n>=-50||_n>=-60?`bg-status-ok/20 text-status-ok`:_n>=-70?`bg-status-warning/20 text-status-warning`:_n>=-80?`bg-orange-500/20 text-orange-600`:`bg-status-error/20 text-status-error`}`,title:`WiFi: ${_n} dBm - ${F(_m(_n).labelKey)}`,children:[(0,G.jsx)(cu,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),_n,`dBm`]}),W?.connected&&(()=>{let e=W.hms_errors?Dm(W.hms_errors):[];return(0,G.jsxs)(`button`,{onClick:()=>ge(!0),className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs cursor-pointer hover:opacity-80 transition-opacity ${e.length>0?e.some(e=>e.severity<=2)?`bg-status-error/20 text-status-error`:`bg-status-warning/20 text-status-warning`:`bg-status-ok/20 text-status-ok`}`,title:F(`printers.clickToViewHmsErrors`),children:[(0,G.jsx)(Iu,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),e.length>0?e.length:`OK`]})})(),M&&(()=>{let e=IT(N),t=e===`failure`?`bg-status-error/20 text-status-error`:e===`warning`?`bg-status-warning/20 text-status-warning`:e===`safe`?`bg-status-ok/20 text-status-ok`:e===`error`?`bg-amber-500/20 text-amber-600 dark:text-amber-400`:`bg-bambu-dark-tertiary text-bambu-gray`,n=e===`error`?F(`printers.aiDetection.tooltipError`,{reason:N?.error??F(`printers.aiDetection.error`)}):e===`unknown`?F(`printers.aiDetection.tooltipUnknown`):N?F(`printers.aiDetection.tooltip`,{status:F(`printers.aiDetection.${e}`),score:N.score.toFixed(3)}):F(`printers.aiDetection.tooltipIdle`),r=e===`error`?rc:Jl;return(0,G.jsxs)(`button`,{onClick:()=>ve(!0),className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs cursor-pointer hover:opacity-80 transition-opacity ${t}`,title:n,children:[(0,G.jsx)(r,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),F(`printers.aiDetection.${e}`)]})})(),n&&(0,G.jsxs)(`button`,{onClick:()=>L(`/maintenance`),className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs cursor-pointer hover:opacity-80 transition-opacity ${n.due_count>0?`bg-status-error/20 text-status-error`:n.warning_count>0?`bg-status-warning/20 text-status-warning`:`bg-status-ok/20 text-status-ok`}`,title:n.due_count>0||n.warning_count>0?`${n.due_count>0?`${n.due_count} maintenance due`:``}${n.due_count>0&&n.warning_count>0?`, `:``}${n.warning_count>0?`${n.warning_count} due soon`:``} - Click to view`:F(`printers.maintenanceUpToDate`),children:[(0,G.jsx)(ed,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),n.due_count>0||n.warning_count>0?n.due_count+n.warning_count:`OK`]}),zn>0&&(0,G.jsxs)(`button`,{onClick:()=>L(`/queue`),className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs bg-indigo-100 dark:bg-indigo-500/20 text-indigo-700 dark:text-indigo-400 hover:opacity-80 transition-opacity`,title:F(`printers.queue.inQueue`,{count:zn}),children:[(0,G.jsx)(qc,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),zn]}),x&&nn?.current_version&&nn?.latest_version?(0,G.jsxs)(`button`,{onClick:()=>Ut(!0),className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs hover:opacity-80 transition-opacity ${nn.update_available?`bg-orange-100 dark:bg-orange-500/20 text-orange-700 dark:text-orange-400`:`bg-status-ok/20 text-status-ok`}`,title:nn.update_available?F(`printers.firmwareUpdateAvailable`,{current:nn.current_version,latest:nn.latest_version}):F(`printers.firmwareUpToDate`,{version:nn.current_version}),children:[nn.update_available?(0,G.jsx)(Ys,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}):(0,G.jsx)(xs,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),nn.current_version]}):W?.firmware_version?(0,G.jsx)(`span`,{className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs bg-bambu-dark-tertiary/50 text-bambu-gray`,children:W.firmware_version}):null,W?.connected&&[`X1C`,`X1`,`X1E`,`X2D`,`P2S`,`H2D`,`H2D Pro`,`H2C`,`H2S`].includes(e.model??``)&&(0,G.jsx)(`span`,{className:`flex items-center px-2 py-1 rounded-full text-xs ${W.door_open?`bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`:`bg-status-ok/20 text-status-ok`}`,title:W.door_open?F(`printers.door.open`):F(`printers.door.closed`),children:W.door_open?(0,G.jsx)(Js,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}):(0,G.jsx)(qs,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`})})]})})]}),ee&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50`,children:(0,G.jsx)(Ld,{className:`w-full max-w-md mx-4`,children:(0,G.jsxs)(zd,{children:[(0,G.jsxs)(`div`,{className:`flex items-start gap-3 mb-4`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-full bg-red-100 dark:bg-red-500/20`,children:(0,G.jsx)(Iu,{className:`w-[var(--pc-i5,1.25rem)] h-[var(--pc-i5,1.25rem)] text-red-600 dark:text-red-400`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white`,children:F(`printers.confirm.deleteTitle`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:F(`printers.confirm.deleteMessage`,{name:e.name})})]})]}),(0,G.jsx)(`div`,{className:`bg-bambu-dark rounded-lg p-3 mb-4`,children:(0,G.jsxs)(`label`,{className:`flex items-start gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:ne,onChange:e=>re(e.target.checked),className:`mt-0.5 w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] rounded border-bambu-gray bg-bambu-dark-secondary text-bambu-green focus:ring-bambu-green focus:ring-offset-0`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:F(`printers.deleteArchives`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:F(ne?`printers.confirm.deleteArchivesNote`:`printers.confirm.keepArchivesNote`)})]})]})}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{te(!1),re(!0)},children:F(`common.cancel`)}),(0,G.jsx)(Q,{variant:`danger`,onClick:()=>{er.mutate({deleteArchives:ne}),te(!1),re(!0)},children:`Delete`})]})]})})}),e.is_active===!1?(0,G.jsx)(G.Fragment,{children:r===`compact`?(0,G.jsxs)(`div`,{className:`mt-2 flex items-center gap-2 px-2 py-1.5 rounded-full bg-amber-50 dark:bg-amber-500/15 border border-amber-300 dark:border-amber-500/30`,children:[(0,G.jsx)(ed,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] text-amber-600 dark:text-amber-400 shrink-0`}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t11,11px)] text-amber-700 dark:text-amber-400 font-medium truncate`,children:F(`printers.maintenance.pillLabel`)})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-2`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] uppercase tracking-wider text-bambu-gray font-medium`,children:F(`printers.status.title`,`Status`)}),(0,G.jsx)(`div`,{className:`flex-1 h-[2px] bg-bambu-dark-tertiary`})]}),(0,G.jsxs)(`div`,{className:`p-3 bg-amber-50 dark:bg-amber-500/10 border border-amber-300 dark:border-amber-500/30 rounded-[10px] flex items-center gap-3`,children:[(0,G.jsx)(ed,{className:`w-6 h-6 text-amber-600 dark:text-amber-400 shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-sm text-amber-700 dark:text-amber-400 font-medium`,children:F(`printers.maintenance.title`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:F(`printers.maintenance.subtitle`)})]}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,disabled:Ar.isPending||!z(`printers:update`),onClick:()=>Ar.mutate(!0),title:z(`printers:update`)?void 0:F(`printers.permission.noEdit`),children:F(`printers.maintenance.exitButton`)})]})]})}):W?.connected&&(0,G.jsxs)(G.Fragment,{children:[r===`compact`?(()=>{let e=W.hms_errors?Dm(W.hms_errors):[],t=W.state===`FAILED`||e.length>0,n=W.state===`RUNNING`||W.state===`PAUSE`?Math.max(0,Math.min(100,W.progress||0)):qn||t?100:0,r=W.state===`RUNNING`||W.state===`PAUSE`,i=t?`bg-status-error`:W.state===`PAUSE`?`bg-status-warning`:`bg-bambu-green`,a=r&&W.remaining_time!=null&&W.remaining_time>0,o=r&&W.layer_num!=null&&W.total_layers!=null&&W.total_layers>0;return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`relative mt-2 flex items-center gap-2`,children:[(0,G.jsx)(`div`,{className:`h-1.5 min-w-0 flex-1 overflow-hidden rounded-full bg-bambu-dark-tertiary`,children:(0,G.jsx)(`div`,{className:`${i} h-1.5 rounded-full transition-all`,style:{width:`${n}%`}})}),(0,G.jsx)(`span`,{className:`w-9 shrink-0 text-right text-[length:var(--pc-t11,11px)] leading-none ${r?`text-white`:`text-bambu-gray`}`,children:r?`${Math.round(n)}%`:`---%`})]}),(0,G.jsxs)(`div`,{className:`mt-1 flex min-h-[14px] items-center gap-2 overflow-hidden text-[length:var(--pc-t11,11px)] leading-none text-bambu-gray`,children:[a&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`span`,{className:`flex shrink-0 items-center gap-1`,children:[(0,G.jsx)(js,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),op(W.remaining_time*60)]}),(0,G.jsxs)(`span`,{className:`shrink-0 font-medium text-bambu-green`,title:F(`printers.estimatedCompletion`),children:[`ETA `,ap(W.remaining_time,g,F)]})]}),o&&(0,G.jsxs)(`span`,{className:`flex min-w-0 items-center gap-1 truncate`,children:[(0,G.jsx)(qc,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] shrink-0`}),W.layer_num,`/`,W.total_layers]})]})]})})():(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-2`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] uppercase tracking-wider text-bambu-gray font-medium`,children:F(`printers.status.title`,`Status`)}),(0,G.jsx)(`div`,{className:`flex-1 h-[2px] bg-bambu-dark-tertiary`})]}),(()=>{let t=!!(W.current_print&&(W.state===`RUNNING`||W.state===`PAUSE`)),n=!t&&Kn&&Yn,r=t?Jn:n?Yn.name:null,i=t?W.cover_url:n?Yn.coverUrl:null,a=t?W.progress||0:n?100:0,o=W.printable_objects_count??0,s=t&&o!==1&&z(`printers:control`);return(0,G.jsxs)(`div`,{className:`p-2 bg-bambu-dark rounded-[10px] relative overflow-hidden`,children:[(0,G.jsxs)(`button`,{onClick:()=>Ve(!0),disabled:!s,className:`absolute top-2 right-2 p-1.5 rounded transition-colors z-10 ${s?`text-bambu-gray hover:text-white hover:bg-white/10`:`text-bambu-gray/30 cursor-not-allowed`}`,title:z(`printers:control`)?F(t?o===1?`printers.skipObjects.requiresMultiple`:`printers.skipObjects.tooltip`:`printers.skipObjects.onlyWhilePrinting`):F(`printers.permission.noControl`),children:[(0,G.jsx)(TT,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`}),Fr&&Fr.skipped_count>0&&(0,G.jsx)(`span`,{className:`absolute -top-1 -right-1 min-w-[16px] h-4 px-1 flex items-center justify-center text-[length:var(--pc-t10,10px)] font-bold bg-red-500 text-white rounded-full`,children:Fr.skipped_count})]}),(0,G.jsxs)(`div`,{className:`flex items-stretch gap-2`,children:[(0,G.jsx)(lke,{url:i,printName:r||void 0,className:`w-24 h-24 max-[520px]:w-20 max-[520px]:h-20`}),(0,G.jsxs)(`div`,{className:`flex h-24 max-[520px]:h-20 min-w-0 flex-1 flex-col justify-between pt-1`,children:[(0,G.jsxs)(`div`,{className:`flex min-h-[18px] items-center gap-2 pr-8`,children:[(0,G.jsx)(`p`,{className:`min-w-0 truncate text-sm text-bambu-gray`,children:pke(W.state,W.stg_cur_name)}),Qn]}),(0,G.jsx)(`p`,{className:`min-h-[18px] truncate pr-8 text-sm ${r?`text-white`:`text-bambu-gray/70`}`,children:r||F(`printers.noActiveJob`,`No active job`)}),(0,G.jsxs)(`div`,{className:`flex h-3 items-center gap-2 text-sm`,children:[(0,G.jsx)(`div`,{className:`h-1.5 min-w-0 flex-1 rounded-full bg-bambu-dark-tertiary`,children:(0,G.jsx)(`div`,{className:`${t?W.state===`PAUSE`?`bg-status-warning`:`bg-bambu-green`:n?`bg-bambu-green`:`bg-bambu-dark-tertiary`} h-1.5 rounded-full transition-all`,style:{width:`${a}%`}})}),(0,G.jsx)(`span`,{className:`w-9 shrink-0 pr-1 text-right text-[length:var(--pc-t11,11px)] leading-none ${t||n?`text-white`:`text-bambu-gray`}`,children:t||n?`${Math.round(a)}%`:`---%`})]}),(0,G.jsx)(`div`,{className:`flex min-h-[16px] items-center gap-2 text-xs text-bambu-gray`,children:t?(0,G.jsxs)(G.Fragment,{children:[W.remaining_time!=null&&W.remaining_time>0&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(js,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),op(W.remaining_time*60)]}),(0,G.jsxs)(`span`,{className:`text-bambu-green font-medium`,title:F(`printers.estimatedCompletion`),children:[`ETA `,ap(W.remaining_time,g,F)]})]}),W.layer_num!=null&&W.total_layers!=null&&W.total_layers>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(qc,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),W.layer_num,`/`,W.total_layers]}),Hn&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,title:`Started by ${Hn}`,children:[(0,G.jsx)(Vu,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),Hn]})]}):Wn?(0,G.jsxs)(`p`,{className:`truncate`,title:Wn.print_name||Wn.filename,children:[`Last: `,Wn.print_name||Wn.filename,Wn.completed_at&&(0,G.jsxs)(`span`,{className:`ml-1 text-bambu-gray/60`,children:[`• `,np(Wn.completed_at,{month:`short`,day:`numeric`})]})]}):(0,G.jsx)(`span`,{children:F(`printers.readyToPrint`)})})]})]}),(0,G.jsx)($se,{printerId:e.id,printerModel:e.model,loadedFilamentTypes:an,loadedFilaments:on,loadedVariants:sn,variant:`panelExtension`})]})})()]}),W.temperatures&&r===`expanded`&&(()=>{let t=W.temperatures.nozzle_heating||W.temperatures.nozzle_2_heating||!1,n=W.temperatures.bed_heating||!1,r=W.temperatures.chamber_heating||!1,i=e.nozzle_count===2||W.temperatures.nozzle_2!==void 0,a=(()=>{let e=[`nozzle`];return W.temperatures.nozzle_2!==void 0&&e.push(`nozzle_2`),e.push(`bed`),W.temperatures.chamber!==void 0&&e.push(`chamber`),e})(),o=W.active_extruder===1?`L`:`R`,s=W.nozzle_rack?.find(e=>e.id===1),c=W.nozzle_rack?.find(e=>e.id===0),l=c||s,u=W.connected&&z(`printers:control`),d=u?void 0:F(`printers.permission.noControl`),f=`relative text-center px-2 py-1.5 bg-bambu-dark rounded-lg flex-1 flex flex-col justify-center items-center transition-colors ${u?`cursor-pointer hover:bg-bambu-dark-tertiary`:`cursor-default opacity-80`}`,p=mke.has(e.model??``),m=hke.has(e.model??``),h=F(m?`printers.fans.exhaust`:`printers.fans.chamber`),g=p&&(!m||W.exhaust_fan_present),_=[{key:`part`,label:F(`printers.fans.partCooling`),value:W.cooling_fan_speed??0,Icon:ac,activeClass:`text-cyan-600 dark:text-cyan-400`},...W.left_aux_fan_speed==null?[]:[{key:`aux2`,label:F(`printers.fans.leftAuxiliary`),value:W.left_aux_fan_speed,Icon:Qu,activeClass:`text-indigo-600 dark:text-indigo-400`}],{key:`aux`,label:F(`printers.fans.auxiliary`),value:W.big_fan1_speed??0,Icon:Qu,activeClass:`text-blue-600 dark:text-blue-400`},...g?[{key:`chamber`,label:h,value:W.big_fan2_speed??0,Icon:No,activeClass:`text-green-600 dark:text-green-400`}]:[]];return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`mt-2 flex items-stretch gap-1.5 flex-wrap`,children:[(0,G.jsxs)(`div`,{className:f,title:d,onClick:()=>u&&Fe(Pe===`nozzle-temp`?null:`nozzle-temp`),children:[(0,G.jsx)(`button`,{type:`button`,className:`absolute top-0.5 right-0.5 p-0.5 rounded text-bambu-gray hover:text-white hover:bg-white/10 transition-colors`,title:F(`printers.heaterHistory.openLabel`,`View heater history`),onClick:e=>{e.stopPropagation(),Ft({initialKind:`nozzle`,availableKinds:a})},children:(0,G.jsx)(ls,{className:`w-[var(--pc-i25,0.625rem)] h-[var(--pc-i25,0.625rem)]`})}),(0,G.jsx)(aG,{className:`w-[var(--pc-i35,0.875rem)] h-[var(--pc-i35,0.875rem)] mb-0.5`,color:`text-orange-400`,isHeating:t}),W.temperatures.nozzle_2===void 0?l?(0,G.jsx)(iG,{slot:l,index:0,activeStatus:!0,filamentName:l.filament_id?cn?.[l.filament_id]?.name:void 0,children:(0,G.jsxs)(`div`,{className:`cursor-default`,children:[(0,G.jsx)(`p`,{className:`text-[length:var(--pc-t9,9px)] text-bambu-gray`,children:F(`printers.temperatures.nozzle`)}),(0,G.jsxs)(`p`,{className:`text-[length:var(--pc-t11,11px)] text-white`,children:[Math.round(W.temperatures.nozzle||0),`°C`]})]})}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`p`,{className:`text-[length:var(--pc-t9,9px)] text-bambu-gray`,children:F(`printers.temperatures.nozzle`)}),(0,G.jsxs)(`p`,{className:`text-[length:var(--pc-t11,11px)] text-white`,children:[Math.round(W.temperatures.nozzle||0),`°C`]})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`p`,{className:`text-[length:var(--pc-t9,9px)] text-bambu-gray`,children:`L / R`}),(0,G.jsxs)(`p`,{className:`text-[length:var(--pc-t11,11px)] text-white`,children:[Math.round(W.temperatures.nozzle||0),`° / `,Math.round(W.temperatures.nozzle_2||0),`°`]})]}),Pe===`nozzle-temp`&&(i?(0,G.jsx)(dG,{title:`Set Nozzle Temperatures`,widthClass:`w-[300px]`,popoverWidth:300,popoverHeight:260,isPending:_r.isPending,onClose:()=>Fe(null),children:(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2 px-3 py-2.5`,children:[(0,G.jsx)(fG,{label:`Left Temp`,current:W.temperatures.nozzle,target:W.temperatures.nozzle_target,isActive:o===`L`,isPending:_r.isPending,onSubmit:e=>_r.mutate({target:e,nozzle:1}),options:Tm(O,`C`)}),(0,G.jsx)(fG,{label:`Right Temp`,current:W.temperatures.nozzle_2,target:W.temperatures.nozzle_2_target,isActive:o===`R`,isPending:_r.isPending,onSubmit:e=>_r.mutate({target:e,nozzle:0}),options:Tm(O,`C`)})]})}):(0,G.jsx)(dG,{title:`Set Nozzle Temperature`,unit:`°C`,customMin:0,customMax:320,isPending:_r.isPending,options:Tm(O,`C`),onClose:()=>Fe(null),onSubmit:e=>_r.mutate({target:e,nozzle:W.active_extruder??0})}))]}),(0,G.jsxs)(`div`,{className:f,title:d,onClick:()=>u&&Fe(Pe===`bed-temp`?null:`bed-temp`),children:[(0,G.jsx)(`button`,{type:`button`,className:`absolute top-0.5 right-0.5 p-0.5 rounded text-bambu-gray hover:text-white hover:bg-white/10 transition-colors`,title:F(`printers.heaterHistory.openLabel`,`View heater history`),onClick:e=>{e.stopPropagation(),Ft({initialKind:`bed`,availableKinds:a})},children:(0,G.jsx)(ls,{className:`w-[var(--pc-i25,0.625rem)] h-[var(--pc-i25,0.625rem)]`})}),(0,G.jsx)(aG,{className:`w-[var(--pc-i35,0.875rem)] h-[var(--pc-i35,0.875rem)] mb-0.5`,color:`text-blue-400`,isHeating:n}),(0,G.jsx)(`p`,{className:`text-[length:var(--pc-t9,9px)] text-bambu-gray`,children:F(`printers.temperatures.bed`)}),(0,G.jsxs)(`p`,{className:`text-[length:var(--pc-t11,11px)] text-white`,children:[Math.round(W.temperatures.bed||0),`°C`]}),Pe===`bed-temp`&&(0,G.jsx)(dG,{title:`Set Bed Temperature`,unit:`°C`,customMin:0,customMax:140,isPending:vr.isPending,options:Tm(k,`C`),onClose:()=>Fe(null),onSubmit:e=>vr.mutate(e)})]}),W.temperatures.chamber!==void 0&&(()=>{let e=W.supports_chamber_heater===!0;return(0,G.jsxs)(`div`,{className:e?f:`relative text-center px-2 py-1.5 bg-bambu-dark rounded-lg flex-1 flex flex-col justify-center items-center`,title:e?d:void 0,onClick:e?()=>u&&Fe(Pe===`chamber-temp`?null:`chamber-temp`):void 0,children:[(0,G.jsx)(`button`,{type:`button`,className:`absolute top-0.5 right-0.5 p-0.5 rounded text-bambu-gray hover:text-white hover:bg-white/10 transition-colors`,title:F(`printers.heaterHistory.openLabel`,`View heater history`),onClick:e=>{e.stopPropagation(),Ft({initialKind:`chamber`,availableKinds:a})},children:(0,G.jsx)(ls,{className:`w-[var(--pc-i25,0.625rem)] h-[var(--pc-i25,0.625rem)]`})}),(0,G.jsx)(aG,{className:`w-[var(--pc-i35,0.875rem)] h-[var(--pc-i35,0.875rem)] mb-0.5`,color:`text-green-400`,isHeating:r}),(0,G.jsx)(`p`,{className:`text-[length:var(--pc-t9,9px)] text-bambu-gray`,children:F(`printers.temperatures.chamber`)}),(0,G.jsxs)(`p`,{className:`text-[length:var(--pc-t11,11px)] text-white`,children:[Math.round(W.temperatures.chamber||0),`°C`]}),e&&Pe===`chamber-temp`&&(0,G.jsx)(dG,{title:`Set Chamber Temperature`,unit:`°C`,customMin:0,customMax:65,isPending:yr.isPending,options:Tm(A,`C`),onClose:()=>Fe(null),onSubmit:e=>yr.mutate(e)})]})})(),i&&(0,G.jsx)(ZOe,{leftSlot:s,rightSlot:c,activeNozzle:o,filamentInfo:cn,children:(0,G.jsxs)(`div`,{className:`relative text-center px-3 py-1.5 bg-bambu-dark rounded-lg h-full flex flex-col justify-center items-center transition-colors ${u?`cursor-pointer hover:bg-bambu-dark-tertiary`:`cursor-default opacity-80`}`,title:u?F(`printers.activeNozzle`,{nozzle:F(o===`L`?`common.left`:`common.right`)}):d,onClick:()=>u&&Fe(Pe===`nozzle-select`?null:`nozzle-select`),children:[(0,G.jsx)(ake,{className:`w-[var(--pc-i35,0.875rem)] h-[var(--pc-i35,0.875rem)] mb-0.5 text-amber-600 dark:text-amber-400`}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`span`,{className:`text-[length:var(--pc-t11,11px)] font-bold ${o===`L`?`text-amber-700 dark:text-amber-400`:`text-gray-500`}`,children:[`L`,s?.nozzle_diameter?` ${s.nozzle_diameter}`:``]}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t9,9px)] text-bambu-gray/40`,children:`·`}),(0,G.jsxs)(`span`,{className:`text-[length:var(--pc-t11,11px)] font-bold ${o===`R`?`text-amber-700 dark:text-amber-400`:`text-gray-500`}`,children:[`R`,c?.nozzle_diameter?` ${c.nozzle_diameter}`:``]})]}),(0,G.jsx)(`p`,{className:`text-[length:var(--pc-t9,9px)] text-bambu-gray`,children:F(`printers.temperatures.nozzle`)}),Pe===`nozzle-select`&&(0,G.jsx)(dG,{title:`Set Nozzle Selection`,widthClass:`w-[300px]`,popoverWidth:300,popoverHeight:140,isPending:xr.isPending,options:[{label:`Left`,value:1},{label:`Right`,value:0}],onClose:()=>Fe(null),onSubmit:e=>xr.mutate(e)})]})}),W.nozzle_rack&&W.nozzle_rack.some(e=>e.id>=2)&&(0,G.jsx)(QOe,{slots:W.nozzle_rack,filamentInfo:cn})]}),(0,G.jsx)(`div`,{className:`mt-2 flex items-center gap-1.5`,children:_.map(({key:e,label:t,value:n,Icon:r,activeClass:i})=>{let a=n>0;return(0,G.jsxs)(`div`,{className:`relative px-2 py-1.5 bg-bambu-dark rounded-lg flex-1 min-w-0 flex items-center justify-center gap-1 transition-colors ${u?`cursor-pointer hover:bg-bambu-dark-tertiary`:`cursor-default opacity-80`}`,title:u?t:d,onClick:()=>u&&Fe(Pe===`fan-${e}`?null:`fan-${e}`),children:[(0,G.jsx)(r,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] shrink-0 ${a?i:`text-bambu-gray/50`}`}),(0,G.jsxs)(`span`,{className:`text-[length:var(--pc-t10,10px)] leading-none ${a?`text-white`:`text-bambu-gray/50`}`,children:[n,`%`]}),Pe===`fan-${e}`&&(0,G.jsx)(dG,{title:`Set ${t} Speed`,unit:`%`,customMin:0,customMax:100,isPending:br.isPending,options:Tm(j,`%`),onClose:()=>Fe(null),onSubmit:t=>br.mutate({fan:e,speed:t})})]},e)})})]})})(),r===`expanded`&&qn&&gr,r===`expanded`&&(()=>{let t=W.state===`RUNNING`,n=W.state===`PAUSE`,r=t||n,i=fr.isPending||pr.isPending||mr.isPending,a=`bg-bambu-dark text-bambu-gray/50 cursor-not-allowed opacity-50`,o=`flex h-8 w-8 items-center justify-center rounded-lg text-xs font-medium transition-colors disabled:opacity-50 disabled:cursor-not-allowed`,s=`flex h-8 w-20 items-center justify-center gap-1 px-2 rounded-lg text-xs font-medium transition-colors`;return(0,G.jsxs)(`div`,{className:`mt-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-2`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] uppercase tracking-wider text-bambu-gray font-medium`,children:F(`printers.controls`)}),(0,G.jsx)(`div`,{className:`flex-1 h-[2px] bg-bambu-dark-tertiary`})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-start justify-between gap-x-2 gap-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 min-w-0`,children:[(0,G.jsx)(`button`,{onClick:()=>Sr.mutate(!W.chamber_light),disabled:!W.connected||Sr.isPending||!z(`printers:control`),className:`${o} ${W.chamber_light?`bg-yellow-50 dark:bg-yellow-500/10 text-yellow-700 dark:text-yellow-400 hover:bg-yellow-500/20`:`bg-bambu-dark text-bambu-gray/50 hover:bg-bambu-dark-tertiary hover:text-white`}`,title:z(`printers:control`)?W.chamber_light?F(`printers.chamberLightOff`):F(`printers.chamberLightOn`):F(`printers.permission.noControl`),children:(0,G.jsx)(wT,{on:W.chamber_light??!1,className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),[`P2S`,`X2D`,`H2D`,`H2C`,`H2S`].includes(e.model??``)&&(()=>{let t=W.airduct_mode===1,n=t?mc:hu,r=t?`text-orange-600 dark:text-orange-400`:`text-sky-600 dark:text-sky-400`,i=t?`bg-orange-50 dark:bg-orange-500/10 text-orange-700 dark:text-orange-400 hover:bg-orange-500/20`:`bg-sky-50 dark:bg-sky-500/10 text-sky-700 dark:text-sky-400 hover:bg-sky-500/20`;return(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`button`,{onClick:()=>je(Ae===e.id?null:e.id),disabled:!z(`printers:control`),className:`${o} ${i}`,title:`${F(`printers.airduct.title`)}: ${F(t?`printers.airduct.heating`:`printers.airduct.cooling`)}`,children:(0,G.jsx)(n,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] ${r}`})}),Ae===e.id&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-40`,onClick:()=>je(null)}),(0,G.jsx)(`div`,{className:`absolute bottom-full left-0 mb-1 z-50 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg py-1 min-w-[130px]`,children:[{mode:`cooling`,label:F(`printers.airduct.cooling`),modeId:0},{mode:`heating`,label:F(`printers.airduct.heating`),modeId:1}].map(({mode:e,label:t,modeId:n})=>(0,G.jsxs)(`button`,{onClick:()=>{wr.mutate(e),je(null)},className:`w-full text-left px-3 py-1.5 text-xs transition-colors flex items-center gap-2 ${W.airduct_mode===n?`text-bambu-green bg-bambu-green/10`:`text-white hover:bg-bambu-dark-tertiary`}`,children:[e===`heating`?(0,G.jsx)(mc,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}):(0,G.jsx)(hu,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),t]},e))})]})]})})(),(()=>{let t=z(`printers:control`),n=r||!t,i=`flex h-8 w-8 items-center justify-center rounded bg-indigo-100 dark:bg-indigo-500/15 text-indigo-700 dark:text-indigo-300 transition-colors hover:bg-indigo-200 dark:hover:bg-indigo-500/30 disabled:cursor-not-allowed disabled:opacity-50`,a=Eee(e.model),s=e=>{let t=a?e===`up`:e===`down`;Tr.mutate({distance:t?Ie:-Ie})},c=(e,t)=>{Er.mutate({x:e,y:t})},l=e=>{Dr.mutate(e)};return(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`button`,{onClick:()=>Ne(Me===e.id?null:e.id),disabled:n,className:`${o} ${n?`bg-bambu-dark text-bambu-gray/50 cursor-not-allowed`:`bg-indigo-50 dark:bg-indigo-500/10 text-indigo-700 dark:text-indigo-400 hover:bg-indigo-500/20`}`,title:F(t?r?`printers.bedJog.disabledWhilePrinting`:`printers.bedJog.title`:`printers.permission.noControl`),children:(0,G.jsx)(vl,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),Me===e.id&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-40`,onClick:()=>Ne(null)}),(0,G.jsxs)(`div`,{className:`absolute bottom-full left-0 mb-1 z-50 flex w-[216px] flex-col overflow-hidden rounded-xl border border-bambu-dark-tertiary bg-bambu-dark-secondary shadow-2xl`,children:[(0,G.jsx)(`div`,{className:`shrink-0 px-3 py-2.5 text-center text-sm font-medium text-white`,children:F(`printers.bedJog.title`)}),(0,G.jsx)(`div`,{className:`h-px bg-bambu-dark-tertiary`}),(0,G.jsxs)(`div`,{className:`flex items-start gap-1.5 bg-yellow-500/10 px-3 py-2 text-[length:var(--pc-t11,11px)] leading-snug text-yellow-700 dark:text-yellow-400`,children:[(0,G.jsx)(Iu,{className:`mt-0.5 h-3.5 w-3.5 shrink-0`}),(0,G.jsx)(`span`,{children:F(`printers.bedJog.limitWarning`)})]}),(0,G.jsx)(`div`,{className:`h-px bg-bambu-dark-tertiary`}),(0,G.jsx)(`div`,{className:`flex justify-center px-3 py-2.5`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-center gap-3`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-3 gap-1`,children:[(0,G.jsx)(`div`,{}),(0,G.jsx)(`button`,{onClick:()=>c(0,Ie),disabled:Er.isPending,className:i,"aria-label":`Move Y forward`,children:(0,G.jsx)(Ho,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(`div`,{}),(0,G.jsx)(`button`,{onClick:()=>c(-Ie,0),disabled:Er.isPending,className:i,"aria-label":`Move X left`,children:(0,G.jsx)(Lo,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(`button`,{onClick:()=>{Ne(null),Or.mutate(`all`)},disabled:Or.isPending,className:i,"aria-label":F(`printers.bedJog.homeZ`),children:(0,G.jsx)(zc,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(`button`,{onClick:()=>c(Ie,0),disabled:Er.isPending,className:i,"aria-label":`Move X right`,children:(0,G.jsx)(zo,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(`div`,{}),(0,G.jsx)(`button`,{onClick:()=>c(0,-Ie),disabled:Er.isPending,className:i,"aria-label":`Move Y back`,children:(0,G.jsx)(Io,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(`div`,{})]}),(0,G.jsxs)(`div`,{className:`flex flex-col items-center gap-1`,children:[(0,G.jsx)(`button`,{onClick:()=>s(`up`),disabled:Tr.isPending,className:i,"aria-label":F(a?`printers.bedJog.toolheadUp`:`printers.bedJog.up`),children:(0,G.jsx)(Ho,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(`div`,{className:`flex h-8 w-8 items-center justify-center text-bambu-gray/80`,children:(0,G.jsx)(qc,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(`button`,{onClick:()=>s(`down`),disabled:Tr.isPending,className:i,"aria-label":F(a?`printers.bedJog.toolheadDown`:`printers.bedJog.down`),children:(0,G.jsx)(Io,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})})]}),(0,G.jsxs)(`div`,{className:`flex flex-col items-center gap-1`,children:[(0,G.jsx)(`button`,{onClick:()=>l(-Ie),disabled:Dr.isPending,className:i,"aria-label":`Retract filament`,children:(0,G.jsx)(Ho,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(`div`,{className:`flex h-8 w-8 items-center justify-center text-bambu-gray/80`,children:(0,G.jsx)(`span`,{className:`text-sm font-semibold leading-none`,children:`E`})}),(0,G.jsx)(`button`,{onClick:()=>l(Ie),disabled:Dr.isPending,className:i,"aria-label":`Extrude filament`,children:(0,G.jsx)(Io,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})})]})]})}),(0,G.jsx)(`div`,{className:`h-px bg-bambu-dark-tertiary`}),(0,G.jsxs)(`div`,{className:`px-3 pt-2.5 pb-3`,children:[(0,G.jsx)(`div`,{className:`mb-1 text-[length:var(--pc-t9,9px)] uppercase tracking-wider text-bambu-gray/70`,children:F(`printers.bedJog.step`)}),(0,G.jsx)(`div`,{className:`flex gap-1`,children:[1,10,50].map(e=>(0,G.jsx)(`button`,{onClick:()=>Le(e),className:`flex-1 px-1 py-1 rounded text-[length:var(--pc-t10,10px)] transition-colors ${Ie===e?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:e},e))})]})]})]})]})})(),(0,G.jsxs)(`div`,{className:`inline-flex rounded-lg ${e.plate_detection_enabled?`ring-1 ring-green-500`:``}`,children:[(0,G.jsx)(`button`,{onClick:$r,disabled:!W.connected||kr.isPending||!z(`printers:update`),className:`${o} rounded-r-none ${e.plate_detection_enabled?`bg-green-50 dark:bg-green-500/10 text-green-700 dark:text-green-400 hover:bg-green-500/20`:`bg-bambu-dark text-bambu-gray/50 hover:bg-bambu-dark-tertiary hover:text-white`}`,title:z(`printers:update`)?e.plate_detection_enabled?F(`printers.plateDetection.enabledClick`):F(`printers.plateDetection.disabledClick`):F(`printers.plateDetection.noPermission`),children:kr.isPending?(0,G.jsx)(Y,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] animate-spin`}):(0,G.jsx)(Yl,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(`button`,{onClick:ei,disabled:!W.connected||Kt||!z(`printers:update`),className:`flex h-8 w-8 items-center justify-center rounded-r-lg border-l border-bambu-dark-tertiary transition-colors disabled:opacity-50 disabled:cursor-not-allowed ${e.plate_detection_enabled?`bg-green-50 dark:bg-green-500/10 text-green-700 dark:text-green-400 hover:bg-green-500/20`:`bg-bambu-dark text-bambu-gray/50 hover:bg-bambu-dark-tertiary hover:text-white`}`,title:z(`printers:update`)?F(`printers.plateDetection.manageCalibration`):F(`printers.plateDetection.noPermission`),children:Kt?(0,G.jsx)(Y,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] animate-spin`}):(0,G.jsx)(ps,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})})]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`button`,{"data-testid":`speed-control`,onClick:()=>ke(Oe===e.id?null:e.id),disabled:!r||!z(`printers:control`),className:`${o} ${r?`bg-amber-50 dark:bg-amber-500/10 text-amber-700 dark:text-amber-400 hover:bg-amber-500/20`:`bg-bambu-dark text-bambu-gray/50 cursor-not-allowed`}`,title:r?F(`printers.speed.title`):void 0,children:(0,G.jsx)(wc,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),Oe===e.id&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-40`,onClick:()=>ke(null)}),(0,G.jsx)(`div`,{className:`absolute bottom-full left-0 mb-1 z-50 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg py-1 min-w-[130px]`,children:[{mode:1,label:F(`printers.speed.silent`)},{mode:2,label:F(`printers.speed.standard`)},{mode:3,label:F(`printers.speed.sport`)},{mode:4,label:F(`printers.speed.ludicrous`)}].map(({mode:e,label:t})=>(0,G.jsx)(`button`,{onClick:()=>{Cr.mutate(e),ke(null)},className:`w-full text-left px-3 py-1.5 text-xs transition-colors ${W.speed_level===e?`text-bambu-green bg-bambu-green/10`:`text-white hover:bg-bambu-dark-tertiary`}`,children:t},e))})]})]})]}),(0,G.jsxs)(`div`,{className:`ml-auto flex items-center justify-end gap-2 flex-shrink-0`,children:[(()=>{let e=!r||i||!z(`printers:control`);return(0,G.jsxs)(`button`,{onClick:()=>n?ze(!0):De(!0),disabled:e,className:`
+          `,style:{maxWidth:`calc(100vw - 24px)`},onMouseEnter:w,onMouseLeave:T,children:(0,G.jsxs)(`div`,{className:`w-52 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl overflow-hidden backdrop-blur-sm p-2.5 space-y-2`,children:[(0,G.jsx)(`div`,{className:`text-[length:var(--pc-t10,10px)] uppercase tracking-wider text-bambu-gray font-medium`,children:n}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] tracking-wide text-bambu-gray font-medium shrink-0`,children:s(`printers.amsPopup.serialNumber`)}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-white font-mono truncate`,children:e.serial_number||`—`})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] tracking-wide text-bambu-gray font-medium shrink-0`,children:s(`printers.amsPopup.firmwareVersion`)}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-white font-mono truncate`,children:e.sw_ver||`—`})]}),(0,G.jsxs)(`div`,{className:`space-y-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray font-medium shrink-0`,children:s(`printers.amsPopup.friendlyName`)}),(0,G.jsx)(`div`,{className:`flex-1 h-[2px] bg-bambu-dark-tertiary/50`})]}),(0,G.jsx)(`input`,{type:`text`,value:f,onChange:e=>i&&p(e.target.value),onKeyDown:e=>e.key===`Enter`&&E(),onFocus:()=>b(!0),onBlur:()=>{b(!1),C.current&&clearTimeout(C.current),C.current=setTimeout(()=>l(!1),200)},placeholder:i?s(`printers.amsPopup.friendlyNamePlaceholder`):r?.[e.id]||`—`,disabled:!i,title:i?void 0:s(`printers.amsPopup.noEditPermission`),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-2 py-1 text-xs text-white placeholder-bambu-gray/60 focus:outline-none focus:border-bambu-green disabled:opacity-50 disabled:cursor-not-allowed`,maxLength:100}),i&&(0,G.jsxs)(`div`,{className:`space-y-1`,children:[g&&(0,G.jsx)(`p`,{className:`text-[length:var(--pc-t10,10px)] text-red-700 dark:text-red-400 break-words`,children:g}),(0,G.jsxs)(`div`,{className:`flex gap-1 justify-end`,children:[(0,G.jsx)(`button`,{onClick:E,disabled:m,className:`px-2 py-0.5 text-[length:var(--pc-t10,10px)] bg-bambu-green text-white rounded hover:bg-bambu-green/80 disabled:opacity-50`,children:s(`printers.amsPopup.save`)}),r?.[e.id]&&(0,G.jsx)(`button`,{onClick:async()=>{if(i){h(!0),_(null);try{await Z.deleteAmsLabel(t,e.id,e.serial_number),a(),l(!1)}catch(e){_(e instanceof Error?e.message:String(e))}finally{h(!1)}}},disabled:m,className:`px-2 py-0.5 text-[length:var(--pc-t10,10px)] bg-bambu-dark-tertiary text-bambu-gray rounded hover:bg-bambu-dark-tertiary/70 disabled:opacity-50`,children:s(`printers.amsPopup.clear`)})]})]})]})]})})]})}var bG={PLA:{n3f:45,n3s:45,n3f_hours:12,n3s_hours:12},PETG:{n3f:65,n3s:65,n3f_hours:12,n3s_hours:12},TPU:{n3f:65,n3s:75,n3f_hours:12,n3s_hours:18},ABS:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},ASA:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},PA:{n3f:65,n3s:85,n3f_hours:12,n3s_hours:12},PC:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},PVA:{n3f:65,n3s:85,n3f_hours:12,n3s_hours:18}},xG={1:1,2:1,3:1.2,4:1.4};function _ke(e){let t=xG[e]??1,n=e=>`${Math.round(e*t*10)/10}px`;return{"--pc-t8":n(8),"--pc-t9":n(9),"--pc-t10":n(10),"--pc-t11":n(11),"--pc-i2":n(8),"--pc-i25":n(10),"--pc-i3":n(12),"--pc-i35":n(14),"--pc-i4":n(16),"--pc-i5":n(20),"--pc-i7":n(28)}}function vke({printerId:e,dryingActive:t,timeFormat:n}){let{t:r}=U(),i=co(),{showToast:a}=Gd(),{data:o=[]}=K({queryKey:QW,queryFn:()=>Z.listScheduledDryings(),refetchInterval:3e4});(0,y.useEffect)(()=>{t&&i.invalidateQueries({queryKey:QW})},[t,i]);let s=q({mutationFn:e=>Z.cancelScheduledDrying(e),onSuccess:()=>i.invalidateQueries({queryKey:QW}),onError:e=>a(e.message||r(`printers.drying.scheduleFailed`),`error`)}),c=o.filter(t=>t.printer_id===e&&(t.status===`pending`||t.status===`failed`));return c.length===0?null:(0,G.jsx)(`div`,{className:`mt-2 space-y-1`,children:c.map(e=>{let t=e.status===`failed`,i=YOe(e.waiting_reason);return(0,G.jsxs)(`div`,{"data-testid":t?`scheduled-drying-failed`:`scheduled-drying-pending`,className:`flex items-center justify-between px-2 py-1 rounded-lg text-[length:var(--pc-t11,11px)] ${t?`bg-red-500/10 border border-red-500/30`:`bg-amber-500/10 border border-amber-500/30`}`,children:[(0,G.jsx)(`span`,{className:t?`text-red-700 dark:text-red-400`:`text-amber-700 dark:text-amber-400`,children:t?r(`printers.drying.scheduleFailedReason`,{reason:e.error_message||r(`printers.drying.scheduleFailedUnknown`)}):(0,G.jsxs)(G.Fragment,{children:[e.start_after?r(`printers.drying.scheduledFor`,{time:rp(e.start_after,n)}):r(`printers.drying.scheduledAsap`),i&&(0,G.jsx)(`span`,{className:`ml-1 opacity-80`,children:r(i)})]})}),(0,G.jsx)(`button`,{onClick:()=>s.mutate(e.id),disabled:s.isPending,title:r(t?`printers.drying.dismissFailed`:`printers.drying.cancelScheduled`),className:`text-bambu-gray hover:text-red-400 transition-colors disabled:opacity-50 disabled:cursor-not-allowed`,children:(0,G.jsx)(td,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`})})]},e.id)})})}function SG({printer:e,hideIfDisconnected:t,maintenanceInfo:n,viewMode:r=`expanded`,cardSize:i=2,amsThresholds:a,spoolmanEnabled:o=!1,linkedSpools:s,spoolmanUrl:c,spoolmanSyncMode:l,onGetAssignment:u,onUnassignSpool:d,spoolmanSpools:f,spoolmanSlotAssignments:p,spoolmanLoading:m=!1,onUnassignSpoolmanSpool:h,timeFormat:g=`system`,cameraViewMode:_=`window`,onOpenEmbeddedCamera:v,onSelectCameraViewMode:b,checkPrinterFirmware:x=!0,dryingPresets:S=bG,requirePlateClear:C=!1,selectionMode:w=!1,isSelected:T=!1,onToggleSelect:E,onOpenCompactCard:D,nozzleTempPresets:O=bm,bedTempPresets:k=xm,chamberTempPresets:A=Sm,fanSpeedPresets:j=Cm,aiDetectionEnabled:M=!1,aiDetection:N,aiLastError:P=null}){let{t:F}=U(),I=co(),L=or(),{showToast:R}=Gd(),{hasPermission:z}=jd(),[B,V]=(0,y.useState)(!1),[ee,te]=(0,y.useState)(!1),[ne,re]=(0,y.useState)(!0),[ie,ae]=(0,y.useState)(!1),[oe,se]=(0,y.useState)(!1),[H,ce]=(0,y.useState)(!1),[le,ue]=(0,y.useState)(!1),[de,fe]=(0,y.useState)(!1),[pe,me]=(0,y.useState)(null),[he,ge]=(0,y.useState)(!1),[_e,ve]=(0,y.useState)(!1),[ye,be]=(0,y.useState)(!1),[xe,Se]=(0,y.useState)(()=>Pee(e.id)),Ce=(0,y.useCallback)(()=>{Se(t=>{let n=!t;return Fee(e.id,n),n})},[e.id]),[we,Te]=(0,y.useState)(!1),[Ee,De]=(0,y.useState)(!1),[Oe,ke]=(0,y.useState)(null),[Ae,je]=(0,y.useState)(null),[Me,Ne]=(0,y.useState)(null),[Pe,Fe]=(0,y.useState)(null),[Ie,Le]=(0,y.useState)(10),[Re,ze]=(0,y.useState)(!1),[Be,Ve]=(0,y.useState)(!1),[He,Ue]=(0,y.useState)(!1),[We,Ge]=(0,y.useState)(!1),[Ke,qe]=(0,y.useState)(!1),Je=(0,y.useCallback)(()=>Ge(!1),[]),[Ye,Xe]=(0,y.useState)(null),[Ze,Qe]=(0,y.useState)(null),[$e,et]=(0,y.useState)(`n3f`),[tt,nt]=(0,y.useState)(`PLA`),[rt,it]=(0,y.useState)(50),[at,ot]=(0,y.useState)(4),[st,ct]=(0,y.useState)(!1),[lt,ut]=(0,y.useState)(`now`),[dt,ft]=(0,y.useState)(120),[pt,mt]=(0,y.useState)(``),[ht,gt]=(0,y.useState)(null),[_t,vt]=(0,y.useState)(null),yt=(0,y.useCallback)((e,t)=>{let n=Mee(e.tray.find(e=>e.tray_type)?.tray_type,S),r=S[n]??bG.PLA,i=e.module_type;nt(n),it(r[i]||r.n3f),ot(i===`n3s`?r.n3s_hours:r.n3f_hours),ct(!1),ut(`now`),ft(120),mt(``),et(e.module_type),Qe(e.id),vt(t)},[S]);(0,y.useLayoutEffect)(()=>{if(Ze===null||!_t)return;let e=()=>{gt(um({triggerRect:_t.getBoundingClientRect(),popoverWidth:GOe,estimatedHeight:KOe,horizontalAlign:`center`}))};return e(),window.addEventListener(`resize`,e),window.addEventListener(`scroll`,e,!0),()=>{window.removeEventListener(`resize`,e),window.removeEventListener(`scroll`,e,!0)}},[Ze,_t]);let bt=(0,y.useRef)(null),xt=(0,y.useRef)(!1),[St,Ct]=(0,y.useState)(null),[wt,Tt]=(0,y.useState)(!1),[Et,Dt]=(0,y.useState)(!1),Ot=(0,y.useRef)(null),[kt,At]=(0,y.useState)(null),jt=(0,y.useRef)(0),[Mt,Nt]=(0,y.useState)(null),[Pt,Ft]=(0,y.useState)(null),[It,Lt]=(0,y.useState)(null),[Rt,zt]=(0,y.useState)(null),[Bt,Vt]=(0,y.useState)(null),[Ht,Ut]=(0,y.useState)(!1),[Wt,Gt]=(0,y.useState)(null),[Kt,qt]=(0,y.useState)(!1),[Jt,Yt]=(0,y.useState)(!1),[Xt,Zt]=(0,y.useState)(null),[Qt,$t]=(0,y.useState)(!1),[en,tn]=(0,y.useState)(!1),{data:W}=K({queryKey:[`printerStatus`,e.id],queryFn:()=>Z.getPrinterStatus(e.id),refetchInterval:3e4}),{data:nn}=K({queryKey:[`firmwareUpdate`,e.id],queryFn:()=>Td.checkPrinterUpdate(e.id),staleTime:300*1e3,refetchInterval:300*1e3,enabled:x&&z(`firmware:read`)}),rn=(0,y.useMemo)(()=>{let e=new Set;if(W?.ams)for(let t of W.ams)for(let n of t.tray||[])n.tray_info_idx&&e.add(n.tray_info_idx);for(let t of W?.vt_tray??[])t.tray_info_idx&&e.add(t.tray_info_idx);if(W?.nozzle_rack)for(let t of W.nozzle_rack)t.filament_id&&e.add(t.filament_id);return Array.from(e)},[W?.ams,W?.vt_tray,W?.nozzle_rack]),an=(0,y.useMemo)(()=>{let e=new Set;if(W?.ams)for(let t of W.ams)for(let n of t.tray||[])n.tray_type&&e.add(n.tray_type.toUpperCase());for(let t of W?.vt_tray??[])t.tray_type&&e.add(t.tray_type.toUpperCase());return e},[W?.ams,W?.vt_tray]),on=(0,y.useMemo)(()=>{let e=new Set;if(W?.ams){for(let t of W.ams)for(let n of t.tray||[])if(n.tray_type&&n.tray_color){let t=n.tray_color.replace(`#`,``).toLowerCase().slice(0,6);e.add(`${n.tray_type.toUpperCase()}:${t}`)}}for(let t of W?.vt_tray??[])if(t.tray_type&&t.tray_color){let n=t.tray_color.replace(`#`,``).toLowerCase().slice(0,6);e.add(`${t.tray_type.toUpperCase()}:${n}`)}return e},[W?.ams,W?.vt_tray]),sn=(0,y.useMemo)(()=>{let e=new Set;if(W?.ams){for(let t of W.ams)for(let n of t.tray||[])if(n.tray_type&&n.tray_color){let t=n.tray_color.replace(`#`,``).toLowerCase().slice(0,6);e.add(`${n.tray_type.toUpperCase()}:${t}:${n.tray_info_idx||``}`)}}for(let t of W?.vt_tray??[])if(t.tray_type&&t.tray_color){let n=t.tray_color.replace(`#`,``).toLowerCase().slice(0,6);e.add(`${t.tray_type.toUpperCase()}:${n}:${t.tray_info_idx||``}`)}return e},[W?.ams,W?.vt_tray]),{data:cn}=K({queryKey:[`filamentInfo`,rn],queryFn:()=>Z.getFilamentInfo(rn),enabled:rn.length>0,staleTime:300*1e3}),{data:ln}=K({queryKey:[`slotPresets`,e.id],queryFn:()=>Z.getSlotPresets(e.id),staleTime:120*1e3}),un=W?.state===`RUNNING`||W?.state===`PAUSE`?W?.current_archive_id??null:null,{data:dn}=K({queryKey:[`archive-plates`,un],queryFn:()=>Z.getArchivePlates(un),enabled:un!=null,staleTime:300*1e3}),fn=!dn?.is_multi_plate||W?.current_plate_id==null?null:dn.plates.find(e=>e.index===W.current_plate_id)?.name||F(`printers.plateNumber`,`Plate {{number}}`,{number:W.current_plate_id}),{data:pn,refetch:mn}=K({queryKey:[`amsLabels`,e.id],queryFn:()=>Z.getAmsLabels(e.id),staleTime:300*1e3}),[hn,gn]=(0,y.useState)(null);(0,y.useEffect)(()=>{W?.wifi_signal!=null&&gn(W.wifi_signal)},[W?.wifi_signal]);let _n=W?.wifi_signal??hn,vn=(0,y.useRef)(void 0);(0,y.useEffect)(()=>{W?.connected!==void 0&&(vn.current=W.connected)},[W?.connected]);let yn=W?.connected??vn.current,bn=(0,y.useRef)({});(0,y.useEffect)(()=>{W?.ams_extruder_map&&Object.keys(W.ams_extruder_map).length>0&&(bn.current=W.ams_extruder_map)},[W?.ams_extruder_map]);let xn=W?.ams_extruder_map&&Object.keys(W.ams_extruder_map).length>0?W.ams_extruder_map:bn.current,Sn=(0,y.useRef)({});(0,y.useEffect)(()=>{W?.ams_switch_inlet&&Object.keys(W.ams_switch_inlet).length>0&&(Sn.current=W.ams_switch_inlet)},[W?.ams_switch_inlet]);let Cn=W?.fila_switch?.installed===!0,wn=W?.ams_switch_inlet&&Object.keys(W.ams_switch_inlet).length>0?W.ams_switch_inlet:Sn.current,Tn=(0,y.useRef)([]);(0,y.useEffect)(()=>{W?.ams&&W.ams.length>0&&(Tn.current=W.ams)},[W?.ams]);let En=W?.ams&&W.ams.length>0?W.ams:Tn.current,Dn=En.some(e=>e.tray.some(e=>e.k))||(W?.vt_tray??[]).some(e=>e.k);(0,y.useEffect)(()=>{if(!St)return;let e=En.find(e=>e.id===St.amsId);e&&(e.dry_time>0||e.dry_status>0)&&Ct(null)},[St,En]),(0,y.useEffect)(()=>{if(!St)return;let e=setTimeout(()=>{Ct(null),R(F(`printers.drying.toastNotStarted`),`error`)},lke);return()=>clearTimeout(e)},[St,R,F]);let On=(0,y.useRef)(void 0),kn=W?.tray_now;kn!==void 0&&kn!==255?On.current=kn:kn===255&&(On.current=void 0);let An=kn!==void 0&&kn!==255?kn:On.current,jn=W?.expected_tray??null,Mn=W?.previous_tray??null,Nn=e=>{if(e===null)return null;if(e===254)return F(`printers.expectedSlot.external`);if(e>=128&&e<=135)return pn?.[e]||gp(e,1);let t=Math.floor(e/4),n=e%4;return F(`printers.expectedSlot.label`,{ams:pn?.[t]||gp(t,4),slot:n+1})},Pn=W?.state===`PAUSE`?{expectedSlotLabel:Nn(jn),ranOutSlotLabel:Nn(Mn)}:null,{data:Fn}=K({queryKey:[`smartPlugByPrinter`,e.id],queryFn:()=>Z.getSmartPlugByPrinter(e.id)}),{data:In}=K({queryKey:[`scriptPlugsByPrinter`,e.id],queryFn:()=>Z.getScriptPlugsByPrinter(e.id)}),{data:Ln}=K({queryKey:[`smartPlugStatus`,Fn?.id],queryFn:()=>Fn?Z.getSmartPlugStatus(Fn.id):null,enabled:!!Fn,refetchInterval:1e4}),{data:Rn}=K({queryKey:[`queue`,e.id,`pending`],queryFn:()=>Z.getQueue(e.id,`pending`)}),zn=(0,y.useMemo)(()=>Rn?.length?ym(Rn,an,on,sn).length:0,[Rn,an,on,sn]),{data:Bn}=K({queryKey:[`queue`,e.id,`printing`],queryFn:()=>Z.getQueue(e.id,`printing`),enabled:W?.state===`RUNNING`}),{data:Vn}=K({queryKey:[`currentPrintUser`,e.id],queryFn:()=>Z.getCurrentPrintUser(e.id),enabled:W?.state===`RUNNING`}),Hn=Bn?.[0]?.created_by_username||Vn?.username,{data:Un}=K({queryKey:[`archives`,e.id,`last`],queryFn:()=>Z.getArchives(e.id,1,0),enabled:W?.connected&&W?.state!==`RUNNING`}),Wn=Un?.[0],Gn=W?.state===`RUNNING`||W?.state===`PAUSE`,Kn=C&&W?.awaiting_plate_clear===!0,qn=Kn&&!Gn,Jn=W?.current_print&&Gn?wee(W.subtask_name||W.current_print||null,W.gcode_file,F,fn):null,[Yn,Xn]=(0,y.useState)(null);(0,y.useEffect)(()=>{Jn?Xn({name:Jn,coverUrl:W?.cover_url??null}):Kn||Xn(null)},[Jn,Kn,W?.cover_url]);let Zn=!C||!W?.connected?null:Gn?{label:F(`printers.plateStatus.inUse`),className:`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`}:W.awaiting_plate_clear?{label:F(`printers.plateStatus.notCleared`),className:`bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`}:{label:F(`printers.plateStatus.cleared`),className:`bg-status-ok/20 text-status-ok`},Qn=Zn?(0,G.jsx)(`span`,{className:`inline-flex flex-shrink-0 items-center rounded-full px-2 py-0.5 text-[length:var(--pc-t10,10px)] font-medium ${Zn.className}`,children:Zn.label}):null,$n=t&&yn===!1,er=q({mutationFn:t=>Z.deletePrinter(e.id,t.deleteArchives),onSuccess:()=>{I.invalidateQueries({queryKey:[`printers`]}),I.invalidateQueries({queryKey:[`archives`]}),I.invalidateQueries({queryKey:[`maintenanceOverview`]})},onError:e=>R(e.message||F(`printers.toast.failedToDelete`),`error`)}),tr=q({mutationFn:()=>Z.connectPrinter(e.id),onSuccess:()=>{I.invalidateQueries({queryKey:[`printerStatus`,e.id]})}}),nr=q({mutationFn:()=>Z.refreshPrinterStatus(e.id),onSuccess:()=>{I.invalidateQueries({queryKey:[`printerStatus`,e.id]}),R(F(`printers.forceRefreshSuccess`),`success`)},onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),rr=q({mutationFn:e=>Z.unlinkSpool(e),onSuccess:e=>{R(F(`spoolman.unlinkSuccess`)||e?.message,`success`),I.invalidateQueries({queryKey:[`linked-spools`]}),I.invalidateQueries({queryKey:[`unlinked-spools`]}),I.invalidateQueries({queryKey:[`spoolman-slot-assignments`]})},onError:e=>{R(e.message||F(`spoolman.unlinkFailed`),`error`)}}),ir=q({mutationFn:({amsId:t,temp:n,duration:r,filament:i,rotateTray:a})=>Z.startDrying(e.id,t,n,r,i,a),onSuccess:(t,{amsId:n})=>{Qe(null),Ct({amsId:n}),R(F(`printers.drying.toastCommandSent`),`success`),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})},onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),ar=q({mutationFn:t=>Z.createScheduledDrying({printer_id:e.id,ams_id:t.amsId,temp:t.temp,duration_hours:t.duration,filament:t.filament,rotate_tray:t.rotateTray,start_after:t.startAfter}),onSuccess:()=>{I.invalidateQueries({queryKey:QW}),Qe(null)},onError:e=>R(e.message||F(`printers.drying.scheduleFailed`),`error`)}),sr=q({mutationFn:t=>Z.stopDrying(e.id,t),onSuccess:()=>{Ct(null),R(F(`printers.drying.toastStopped`),`success`),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})},onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),cr=q({mutationFn:t=>Z.setAmsFilamentBackup(e.id,t),onSuccess:(t,n)=>{I.invalidateQueries({queryKey:[`printerStatus`,e.id]}),I.invalidateQueries({queryKey:[`printer-status`,e.id]}),R(F(n?`printers.amsBackup.toastEnabled`:`printers.amsBackup.toastDisabled`),`success`)},onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),lr=q({mutationFn:e=>Fn?Z.controlSmartPlug(Fn.id,e):Promise.reject(`No plug`),onSuccess:()=>{I.invalidateQueries({queryKey:[`smartPlugStatus`,Fn?.id]})}}),ur=q({mutationFn:e=>Fn?Z.updateSmartPlug(Fn.id,{auto_off:e}):Promise.reject(`No plug`),onSuccess:()=>{I.invalidateQueries({queryKey:[`smartPlugByPrinter`,e.id]}),I.invalidateQueries({queryKey:[`smart-plugs`]})}}),dr=q({mutationFn:({id:e,action:t})=>Z.controlSmartPlug(e,t),onSuccess:()=>{R(F(`printers.toast.scriptTriggered`))},onError:e=>R(e.message||F(`printers.toast.failedToRunScript`),`error`)}),fr=q({mutationFn:()=>Z.stopPrint(e.id),onSuccess:()=>{R(F(`printers.toast.printStopped`)),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})},onError:e=>R(e.message||F(`printers.toast.failedToStopPrint`),`error`)}),pr=q({mutationFn:()=>Z.pausePrint(e.id),onSuccess:()=>{R(F(`printers.toast.printPaused`)),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})},onError:e=>R(e.message||F(`printers.toast.failedToPausePrint`),`error`)}),mr=q({mutationFn:()=>Z.resumePrint(e.id),onSuccess:()=>{R(F(`printers.toast.printResumed`)),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})},onError:e=>R(e.message||F(`printers.toast.failedToResumePrint`),`error`)}),hr=q({mutationFn:()=>Z.clearPlate(e.id),onSuccess:()=>{R(F(`queue.clearPlateSuccess`)),I.setQueryData([`printerStatus`,e.id],e=>e&&{...e,awaiting_plate_clear:!1}),I.invalidateQueries({queryKey:[`printerStatus`,e.id]}),I.invalidateQueries({queryKey:[`queue`,e.id]})},onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),gr=(0,G.jsxs)(`button`,{type:`button`,onClick:()=>hr.mutate(),disabled:hr.isPending||!z(`printers:clear_plate`),className:`mt-2 w-full inline-flex items-center justify-center gap-2 px-3 py-1.5 rounded-lg bg-yellow-100 dark:bg-yellow-500/20 border border-yellow-300 dark:border-yellow-400/40 text-yellow-700 dark:text-yellow-400 hover:bg-yellow-500/30 transition-colors text-xs font-medium disabled:opacity-50`,title:z(`printers:clear_plate`)?F(`printers.plateStatus.markCleared`):F(`printers.permission.noControl`),children:[hr.isPending?(0,G.jsx)(Y,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] animate-spin`}):(0,G.jsx)(vW,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`}),F(`printers.plateStatus.markCleared`)]}),_r=q({mutationFn:({target:t,nozzle:n})=>Z.setNozzleTemperature(e.id,t,n),onSuccess:t=>{Fe(null),R(t.message),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})},onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),vr=q({mutationFn:t=>Z.setBedTemperature(e.id,t),onSuccess:t=>{Fe(null),R(t.message),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})},onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),yr=q({mutationFn:t=>Z.setChamberTemperature(e.id,t),onSuccess:t=>{Fe(null),R(t.message),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})},onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),br=q({mutationFn:({fan:t,speed:n})=>Z.setFanSpeed(e.id,t,n),onMutate:async({fan:t,speed:n})=>{await I.cancelQueries({queryKey:[`printerStatus`,e.id]});let r=I.getQueryData([`printerStatus`,e.id]),i={part:`cooling_fan_speed`,aux:`big_fan1_speed`,aux2:`left_aux_fan_speed`,chamber:`big_fan2_speed`}[t];return I.setQueryData([`printerStatus`,e.id],e=>e&&{...e,[i]:n}),{previousStatus:r}},onSuccess:t=>{Fe(null),R(t.message),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})},onError:(t,n,r)=>{r?.previousStatus&&I.setQueryData([`printerStatus`,e.id],r.previousStatus),R(t.message||F(`printers.toast.failedToSendCommand`),`error`)}}),xr=q({mutationFn:t=>Z.selectExtruder(e.id,t),onMutate:async t=>{await I.cancelQueries({queryKey:[`printerStatus`,e.id]});let n=I.getQueryData([`printerStatus`,e.id]);return I.setQueryData([`printerStatus`,e.id],e=>e&&{...e,active_extruder:t}),{previousStatus:n}},onSuccess:t=>{Fe(null),R(t.message),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})},onError:(t,n,r)=>{r?.previousStatus&&I.setQueryData([`printerStatus`,e.id],r.previousStatus),R(t.message||F(`printers.toast.failedToSendCommand`),`error`)}}),Sr=q({mutationFn:t=>Z.setChamberLight(e.id,t),onMutate:async t=>{await I.cancelQueries({queryKey:[`printerStatus`,e.id]});let n=I.getQueryData([`printerStatus`,e.id]);return I.setQueryData([`printerStatus`,e.id],e=>({...e,chamber_light:t})),{previousStatus:n}},onSuccess:(e,t)=>{R(`Chamber light ${t?`on`:`off`}`)},onError:(t,n,r)=>{r?.previousStatus&&I.setQueryData([`printerStatus`,e.id],r.previousStatus),R(t.message||F(`printers.toast.failedToControlChamberLight`),`error`)}}),Cr=q({mutationFn:t=>Z.setPrintSpeed(e.id,t),onMutate:async t=>{await I.cancelQueries({queryKey:[`printerStatus`,e.id]});let n=I.getQueryData([`printerStatus`,e.id]);return I.setQueryData([`printerStatus`,e.id],e=>({...e,speed_level:t})),{previousStatus:n}},onError:(t,n,r)=>{r?.previousStatus&&I.setQueryData([`printerStatus`,e.id],r.previousStatus),R(t.message||F(`printers.toast.failedToSetSpeed`),`error`)}}),wr=q({mutationFn:t=>Z.setAirductMode(e.id,t),onMutate:async t=>{await I.cancelQueries({queryKey:[`printerStatus`,e.id]});let n=I.getQueryData([`printerStatus`,e.id]);return I.setQueryData([`printerStatus`,e.id],e=>({...e,airduct_mode:t===`cooling`?0:1})),{previousStatus:n}},onError:(t,n,r)=>{r?.previousStatus&&I.setQueryData([`printerStatus`,e.id],r.previousStatus),R(t.message||F(`printers.toast.failedToSendCommand`),`error`)}}),Tr=q({mutationFn:({distance:t})=>Z.bedJog(e.id,t),onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),Er=q({mutationFn:({x:t,y:n})=>Z.xyJog(e.id,t,n),onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),Dr=q({mutationFn:t=>Z.extruderJog(e.id,t),onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),Or=q({mutationFn:t=>Z.homeAxes(e.id,t),onSuccess:()=>{R(F(`printers.bedJog.homingStarted`))},onError:e=>R(e.message||F(`printers.toast.failedToSendCommand`),`error`)}),kr=q({mutationFn:t=>Z.updatePrinter(e.id,{plate_detection_enabled:t}),onSuccess:()=>{I.invalidateQueries({queryKey:[`printers`]}),R(kr.variables?F(`printers.toast.plateCheckEnabled`):F(`printers.toast.plateCheckDisabled`))},onError:e=>R(e.message||F(`printers.toast.failedToUpdateSetting`),`error`)}),Ar=q({mutationFn:t=>Z.updatePrinter(e.id,{is_active:t}),onSuccess:(t,n)=>{I.invalidateQueries({queryKey:[`printers`]}),I.invalidateQueries({queryKey:[`printerStatus`,e.id]}),R(F(n?`printers.maintenance.toastExited`:`printers.maintenance.toastEntered`,{name:e.name}),`success`)},onError:e=>R(e.message||F(`printers.toast.failedToUpdateSetting`),`error`)}),[jr,Mr]=(0,y.useState)(!1),Nr=()=>{W?.state===`RUNNING`||W?.state===`PAUSE`?Mr(!0):Ar.mutate(!1)},Pr=(W?.state===`RUNNING`||W?.state===`PAUSE`)&&(W?.printable_objects_count??0)>=2,{data:Fr}=K({queryKey:[`printableObjects`,e.id],queryFn:()=>Z.getPrintableObjects(e.id),enabled:Be||Pr,refetchInterval:Be?5e3:Pr?3e4:!1}),[Ir,Lr]=(0,y.useState)(null),Rr=(0,y.useRef)(!1),zr=(0,y.useRef)(null),Br=(0,y.useRef)(!1),Vr=q({mutationFn:({amsId:t,slotId:n})=>Z.refreshAmsSlot(e.id,t,n),onMutate:({amsId:e,slotId:t})=>{zr.current&&clearTimeout(zr.current),Rr.current=!1,Br.current=!1,Lr({amsId:e,slotId:t}),setTimeout(()=>{Br.current=!0},2e3),zr.current=setTimeout(()=>{Lr(null)},3e4)},onSuccess:e=>{R(e.message||F(`printers.toast.rfidRereadInitiated`))},onError:e=>{R(e.message||F(`printers.toast.failedToRereadRfid`),`error`),zr.current&&clearTimeout(zr.current),Lr(null)}}),Hr=q({mutationFn:({trayId:t,extruderId:n})=>Z.loadAmsTray(e.id,t,n),onSuccess:e=>{Gr(null),R(e.message||F(`printers.toast.loadInitiated`))},onError:e=>{Gr(null),R(e.message||F(`printers.toast.failedToLoad`),`error`)}}),Ur=q({mutationFn:({trayId:t})=>Z.unloadAms(e.id,t),onSuccess:e=>{R(e.message||F(`printers.toast.unloadInitiated`))},onError:e=>{R(e.message||F(`printers.toast.failedToUnload`),`error`)}}),[Wr,Gr]=(0,y.useState)(null),Kr=!!W?.fila_switch?.installed,qr=(e,t,n)=>{if(!Kr||e===255||e>=128){Hr.mutate({trayId:n});return}if(!W?.fila_switch?.ready){R(F(`printers.ams.switchNotReady`),`warning`);return}Gr({trayId:n,amsId:e,slotId:t,slotLabel:Op(e,t,!1,!1)})},[Jr,Yr]=(0,y.useState)(null),[Xr,Zr]=(0,y.useState)(null),Qr=async()=>{try{Yr(await Z.getPlateReferences(e.id))}catch{}},$r=()=>{kr.mutate(!e.plate_detection_enabled)},ei=async()=>{qt(!0),Gt(null);let t=W?.chamber_light===!1;tn(t),t&&(await Z.setChamberLight(e.id,!0),await new Promise(e=>setTimeout(e,2500)));try{Gt(await Z.checkPlateEmpty(e.id,{includeDebugImage:!0})),Qr()}catch(n){R(n instanceof Error?n.message:F(`printers.toast.failedToCheckPlate`),`error`),t&&(await Z.setChamberLight(e.id,!1),tn(!1))}finally{qt(!1)}},ti=(0,y.useCallback)(async()=>{Gt(null),en&&(await Z.setChamberLight(e.id,!1),tn(!1))},[en,e.id]),ni=async t=>{Yt(!0);try{let n=await Z.calibratePlateDetection(e.id,{label:t});n.success?(R(n.message||F(`printers.toast.calibrationSaved`),`success`),Qr(),Gt(await Z.checkPlateEmpty(e.id,{includeDebugImage:!0}))):R(n.message||F(`printers.toast.calibrationFailed`),`error`)}catch(e){R(e instanceof Error?e.message:F(`printers.toast.calibrationFailed`),`error`)}finally{Yt(!1)}},ri=async(t,n)=>{try{await Z.updatePlateReferenceLabel(e.id,t,n),Zr(null),Qr()}catch(e){R(e instanceof Error?e.message:F(`printers.toast.failedToUpdateLabel`),`error`)}},ii=async t=>{try{await Z.deletePlateReference(e.id,t),R(F(`printers.toast.referenceDeleted`),`success`),Qr(),Gt(await Z.checkPlateEmpty(e.id,{includeDebugImage:!0}))}catch(e){R(e instanceof Error?e.message:F(`printers.toast.failedToDeleteReference`),`error`)}},ai=async()=>{if(Xt){$t(!0);try{await Z.updatePrinter(e.id,{plate_detection_roi:Xt}),R(F(`printers.toast.detectionAreaSaved`),`success`),Zt(null),Gt(await Z.checkPlateEmpty(e.id,{includeDebugImage:!0}))}catch(e){R(e instanceof Error?e.message:F(`printers.toast.failedToSaveDetectionArea`),`error`)}finally{$t(!1)}}};(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&Wt&&ti()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[Wt,ti]);let oi=(0,y.useRef)(null);if((0,y.useEffect)(()=>{if(!Ir)return;let e=W?.ams_status_main??0;return e!==0&&(Rr.current=!0,oi.current&&=(clearTimeout(oi.current),null)),Rr.current&&e===0&&(Br.current?(zr.current&&clearTimeout(zr.current),Lr(null)):oi.current||=setTimeout(()=>{zr.current&&clearTimeout(zr.current),Lr(null)},2e3)),()=>{oi.current&&clearTimeout(oi.current)}},[W?.ams_status_main,Ir]),(0,y.useEffect)(()=>{if(!B)return;let e=e=>{let t=e.target;Ot.current?.contains(t)||V(!1)};return document.addEventListener(`mousedown`,e),()=>document.removeEventListener(`mousedown`,e)},[B]),$n)return null;let si=_ke(i),ci=()=>{switch(i){case 1:return`w-10 h-10`;case 2:return`w-14 h-14`;case 3:return`w-16 h-16`;case 4:return`w-20 h-20`;default:return`w-14 h-14`}},li=()=>{switch(i){case 1:return`text-base truncate`;case 2:return`text-lg`;case 3:return`text-xl`;case 4:return`text-2xl`;default:return`text-lg`}},ui=()=>{switch(i){case 1:return`mb-2`;case 2:return`mb-4`;case 3:return`mb-5`;case 4:return`mb-6`;default:return`mb-4`}},di=z(`library:upload`)&&z(`queue:create`),fi=!vm(W),pi=e=>{e.preventDefault(),jt.current++,jt.current===1&&Tt(!0)},mi=e=>{e.preventDefault(),e.dataTransfer.dropEffect=di?`copy`:`none`},hi=e=>{e.preventDefault(),jt.current--,jt.current===0&&Tt(!1)},gi=async t=>{if(t.preventDefault(),jt.current=0,Tt(!1),!di)return;let n=Array.from(t.dataTransfer.files)[0];if(!n)return;let r=n.name.toLowerCase();if(!r.endsWith(`.gcode`)&&!r.includes(`.gcode.`)){R(F(`printers.dropNotPrintable`,`Only .gcode and .gcode.3mf files can be printed`),`error`);return}Dt(!0);try{let t=await Z.uploadLibraryFile(n,null),r=t.metadata?.sliced_for_model,i=vG(e.model);if(r&&i&&r.toLowerCase()!==i.toLowerCase()){await Z.deleteLibraryFile(t.id).catch(()=>{}),R(F(`printers.incompatibleFile`,`This file was sliced for {{slicedFor}}, but this printer is a {{printerModel}}`,{slicedFor:r,printerModel:i}),`error`);return}Xe({id:t.id,filename:t.filename})}catch{R(F(`common.uploadFailed`,`Upload failed`),`error`)}finally{Dt(!1)}},_i=t=>{r!==`compact`||w||t.target.closest(`button, a, input, select, textarea, [role="button"]`)||D?.(e.id)},vi=`!h-8 !min-h-8 !w-8 !px-0 !py-0`,yi=t=>{t===`embedded`&&v?v(e.id,e.name):fm(e.id)},bi=[{mode:`window`,icon:(0,G.jsx)(nc,{className:`w-4 h-4`}),label:F(`settings.newWindow`),title:F(`settings.cameraWindowDescription`)},{mode:`embedded`,icon:(0,G.jsx)(jl,{className:`w-4 h-4`}),label:F(`settings.embeddedOverlay`),title:F(`settings.cameraOverlayDescription`)}].map(({mode:e,icon:t,label:n,title:r})=>({icon:t,label:e===_?`${n} ✓`:n,title:r,onClick:()=>{b?.(e),yi(e)}})),xi=({amsId:e,slotId:t,loadTrayId:n,isRefreshing:r,includeRfid:i=!0})=>{let a=W?.state===`RUNNING`,o=e>=128&&e!==255?void 0:n;return(0,G.jsxs)(G.Fragment,{children:[i&&(0,G.jsxs)(`button`,{className:`w-full px-2 py-1.5 text-left text-xs flex items-center gap-2 rounded transition-colors ${z(`printers:ams_rfid`)?`text-white hover:bg-bambu-dark-tertiary`:`text-bambu-gray/50 cursor-not-allowed`}`,onClick:n=>{n.stopPropagation(),!(a||!z(`printers:ams_rfid`))&&Vr.mutate({amsId:e,slotId:t})},disabled:a||r||!z(`printers:ams_rfid`),title:a?F(`printers.bedJog.disabledWhilePrinting`):z(`printers:ams_rfid`)?void 0:F(`printers.permission.noAmsRfid`),children:[(0,G.jsx)(Vl,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] ${r?`animate-spin`:``}`}),F(`printers.rfid.reread`)]}),(0,G.jsxs)(`button`,{className:`w-full px-2 py-1.5 text-left text-xs flex items-center gap-2 rounded transition-colors ${z(`printers:control`)?`text-white hover:bg-bambu-dark-tertiary`:`text-bambu-gray/50 cursor-not-allowed`}`,onClick:r=>{r.stopPropagation(),!(a||!z(`printers:control`))&&qr(e,t,n)},disabled:a||!z(`printers:control`),title:a?F(`printers.bedJog.disabledWhilePrinting`):z(`printers:control`)?void 0:F(`printers.permission.noControl`),children:[(0,G.jsx)(nl,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),F(`printers.ams.load`)]}),(0,G.jsxs)(`button`,{className:`w-full px-2 py-1.5 text-left text-xs flex items-center gap-2 rounded transition-colors ${z(`printers:control`)?`text-white hover:bg-bambu-dark-tertiary`:`text-bambu-gray/50 cursor-not-allowed`}`,onClick:e=>{e.stopPropagation(),!(a||!z(`printers:control`))&&Ur.mutate({trayId:o})},disabled:a||!z(`printers:control`),title:a?F(`printers.bedJog.disabledWhilePrinting`):z(`printers:control`)?void 0:F(`printers.permission.noControl`),children:[(0,G.jsx)(rl,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),F(`printers.ams.unload`)]})]})},Si=(0,G.jsxs)(`div`,{ref:Ot,className:`relative flex-shrink-0`,children:[(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>V(!B),title:F(`common.more`,`More`),className:vi,children:(0,G.jsx)(Qs,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),B&&(0,G.jsxs)(`div`,{className:`absolute left-0 bottom-full mb-2 w-48 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg z-20`,children:[(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-sm flex items-center gap-2 ${z(`printers:update`)?`hover:bg-bambu-dark-tertiary`:`opacity-50 cursor-not-allowed`}`,onClick:()=>{z(`printers:update`)&&(ae(!0),V(!1))},title:z(`printers:update`)?void 0:F(`printers.permission.noEdit`),children:[(0,G.jsx)(kl,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`}),F(`common.edit`)]}),(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex items-center gap-2`,onClick:()=>{Ge(!0),V(!1)},children:[(0,G.jsx)(Uc,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`}),F(`printers.printerInformation`)]}),(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-sm flex items-center gap-2 ${z(`printers:update`)?`hover:bg-bambu-dark-tertiary`:`opacity-50 cursor-not-allowed`}`,disabled:Ar.isPending||!z(`printers:update`),onClick:()=>{z(`printers:update`)&&(V(!1),e.is_active===!1?Ar.mutate(!0):Nr())},title:z(`printers:update`)?void 0:F(`printers.permission.noEdit`),children:[(0,G.jsx)(ed,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`}),e.is_active===!1?F(`printers.maintenance.menuExit`):F(`printers.maintenance.menuEnter`)]}),(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex items-center gap-2`,onClick:()=>{tr.mutate(),V(!1)},children:[(0,G.jsx)(Vl,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`}),F(`printers.reconnect`)]}),(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex items-center gap-2 disabled:opacity-50`,disabled:nr.isPending,onClick:()=>{nr.mutate(),V(!1)},children:[(0,G.jsx)(Wl,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] ${nr.isPending?`animate-spin`:``}`}),F(`printers.forceRefresh`)]}),(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex items-center gap-2`,onClick:()=>{ce(!0),V(!1)},children:[(0,G.jsx)(Du,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`}),F(`printers.mqttDebug`)]}),(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex items-center gap-2`,onClick:()=>{qe(!0),V(!1)},children:[(0,G.jsx)(xu,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`}),F(`diagnostic.runButton`)]}),(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-sm flex items-center gap-2 ${z(`printers:delete`)?`text-red-700 dark:text-red-400 hover:bg-bambu-dark-tertiary`:`text-red-700/50 dark:text-red-400/50 cursor-not-allowed`}`,onClick:()=>{z(`printers:delete`)&&(te(!0),V(!1))},title:z(`printers:delete`)?void 0:F(`printers.permission.noDelete`),children:[(0,G.jsx)(Nu,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`}),F(`common.delete`)]})]})]});return(0,G.jsxs)(Ld,{id:`printer-card-${e.id}`,className:`relative flex h-full flex-col ${T?`ring-2 ring-bambu-green`:``} ${w||r===`compact`?`cursor-pointer`:``}`,style:si,onClick:_i,onDragEnter:pi,onDragOver:mi,onDragLeave:hi,onDrop:gi,children:[w&&(0,G.jsx)(`div`,{className:`absolute inset-0 z-20 flex items-start p-2`,onClick:t=>{t.stopPropagation(),E?.(e.id)},children:T?(0,G.jsx)(_u,{className:`w-[var(--pc-i5,1.25rem)] h-[var(--pc-i5,1.25rem)] text-bambu-green`}):(0,G.jsx)(yu,{className:`w-[var(--pc-i5,1.25rem)] h-[var(--pc-i5,1.25rem)] text-bambu-gray`})}),(wt||Et)&&(0,G.jsx)(`div`,{className:`absolute inset-0 z-10 rounded-xl border-2 border-dashed flex items-center justify-center transition-colors ${Et?`bg-bambu-green/10 border-bambu-green/50`:di?`bg-bambu-green/10 border-bambu-green`:`bg-red-50 dark:bg-red-500/10 border-red-300 dark:border-red-500/50`}`,children:(0,G.jsx)(`div`,{className:`text-center`,children:Et?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-8 h-8 mx-auto mb-2 text-bambu-green animate-spin`}),(0,G.jsx)(`p`,{className:`text-sm font-medium text-bambu-green`,children:F(`common.uploading`,`Uploading...`)})]}):di?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ll,{className:`w-8 h-8 mx-auto mb-2 text-bambu-green`}),(0,G.jsx)(`p`,{className:`text-sm font-medium text-bambu-green`,children:F(fi?`printers.dropToQueue`:`printers.dropToPrint`)})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(td,{className:`w-8 h-8 mx-auto mb-2 text-red-600 dark:text-red-400`}),(0,G.jsx)(`p`,{className:`text-sm font-medium text-red-700 dark:text-red-400`,children:z(`library:upload`)?F(`fileManager.noPermissionAddToQueue`):F(`fileManager.noPermissionUpload`)})]})})}),(0,G.jsxs)(zd,{className:`${i>=3?`p-5`:``} flex flex-1 flex-col`,children:[(0,G.jsxs)(`div`,{className:ui(),children:[(0,G.jsx)(`div`,{className:`flex items-start justify-between gap-2`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-3 min-w-0 flex-1`,children:[(0,G.jsx)(`img`,{src:hm(e.model),alt:e.model||F(`common.printer`),className:`object-contain rounded-lg flex-shrink-0 ${ci()}`}),(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex min-w-0 items-center gap-2`,children:[(0,G.jsx)(`h3`,{className:`font-semibold text-white ${li()}`,children:e.name}),r===`compact`&&(()=>{let e=W?.connected&&W.hms_errors?Dm(W.hms_errors):[],t=e.some(e=>e.severity<=2),n=e.length>0,r=W?.connected?t?`bg-status-error`:n?`bg-status-warning`:`bg-status-ok`:`bg-status-error`,i=W?.connected?n?`${e.length} HMS ${e.length===1?`error`:`errors`}`:F(`printers.connection.connected`):F(`printers.connection.offline`);return(0,G.jsx)(`div`,{className:`w-[var(--pc-i2,0.5rem)] h-[var(--pc-i2,0.5rem)] rounded-full flex-shrink-0 ${r}`,title:i})})()]}),r===`compact`&&qn&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>hr.mutate(),disabled:hr.isPending||!z(`printers:clear_plate`),"aria-label":F(`printers.plateStatus.markCleared`),className:`inline-flex h-5 w-5 flex-shrink-0 items-center justify-center rounded-md bg-yellow-100 dark:bg-yellow-500/20 border border-yellow-300 dark:border-yellow-400/40 text-yellow-700 dark:text-yellow-400 hover:bg-yellow-500/30 transition-colors disabled:opacity-50`,title:z(`printers:clear_plate`)?F(`printers.plateStatus.markCleared`):F(`printers.permission.noControl`),children:hr.isPending?(0,G.jsx)(Y,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] animate-spin`}):(0,G.jsx)(vW,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`})})]}),(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[e.model||`Unknown Model`,r===`expanded`&&Bp(W).length>0&&(0,G.jsxs)(`span`,{className:`ml-1.5 text-bambu-gray`,title:W?.nozzles?.[0]?.nozzle_type||`Nozzle`,children:[`• `,Bp(W).join(` / `),`mm`]}),r===`expanded`&&n&&n.total_print_hours>0&&(0,G.jsxs)(`span`,{className:`ml-2 text-bambu-gray`,children:[(0,G.jsx)(js,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] inline-block mr-1`}),Math.round(n.total_print_hours),`h`]})]})]})]})}),r===`expanded`&&(0,G.jsx)(`div`,{className:`mt-2`,children:(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2`,children:[e.is_active===!1?(0,G.jsxs)(`span`,{className:`flex items-center gap-1.5 px-2 py-1 rounded-full text-xs bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400`,title:F(`printers.maintenance.subtitle`),children:[(0,G.jsx)(ed,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),F(`printers.maintenance.pillLabel`)]}):(0,G.jsxs)(`span`,{className:`flex items-center gap-1.5 px-2 py-1 rounded-full text-xs ${W?.connected?`bg-status-ok/20 text-status-ok`:`bg-status-error/20 text-status-error`}`,children:[W?.connected?(0,G.jsx)(Xc,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}):(0,G.jsx)(zu,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),W?.connected?F(`printers.connection.connected`):F(`printers.connection.offline`)]}),e.is_active!==!1&&!W?.connected&&(0,G.jsxs)(`button`,{onClick:()=>qe(!0),className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs cursor-pointer bg-bambu-dark-tertiary text-bambu-gray hover:text-white transition-colors`,title:F(`diagnostic.runButton`),children:[(0,G.jsx)(xu,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),F(`diagnostic.runButton`)]}),W?.connected&&W?.wired_network&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs bg-status-ok/20 text-status-ok`,title:F(`printers.connection.ethernet`,`Ethernet`),children:[(0,G.jsx)(ts,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),F(`printers.connection.ethernet`,`Ethernet`)]}),W?.connected&&!W?.wired_network&&_n!=null&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs ${_n>=-50||_n>=-60?`bg-status-ok/20 text-status-ok`:_n>=-70?`bg-status-warning/20 text-status-warning`:_n>=-80?`bg-orange-500/20 text-orange-600`:`bg-status-error/20 text-status-error`}`,title:`WiFi: ${_n} dBm - ${F(_m(_n).labelKey)}`,children:[(0,G.jsx)(cu,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),_n,`dBm`]}),W?.connected&&(()=>{let e=W.hms_errors?Dm(W.hms_errors):[];return(0,G.jsxs)(`button`,{onClick:()=>ge(!0),className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs cursor-pointer hover:opacity-80 transition-opacity ${e.length>0?e.some(e=>e.severity<=2)?`bg-status-error/20 text-status-error`:`bg-status-warning/20 text-status-warning`:`bg-status-ok/20 text-status-ok`}`,title:F(`printers.clickToViewHmsErrors`),children:[(0,G.jsx)(Iu,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),e.length>0?e.length:`OK`]})})(),M&&(()=>{let e=IT(N),t=e===`failure`?`bg-status-error/20 text-status-error`:e===`warning`?`bg-status-warning/20 text-status-warning`:e===`safe`?`bg-status-ok/20 text-status-ok`:e===`error`?`bg-amber-500/20 text-amber-600 dark:text-amber-400`:`bg-bambu-dark-tertiary text-bambu-gray`,n=e===`error`?F(`printers.aiDetection.tooltipError`,{reason:N?.error??F(`printers.aiDetection.error`)}):e===`unknown`?F(`printers.aiDetection.tooltipUnknown`):N?F(`printers.aiDetection.tooltip`,{status:F(`printers.aiDetection.${e}`),score:N.score.toFixed(3)}):F(`printers.aiDetection.tooltipIdle`),r=e===`error`?rc:Jl;return(0,G.jsxs)(`button`,{onClick:()=>ve(!0),className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs cursor-pointer hover:opacity-80 transition-opacity ${t}`,title:n,children:[(0,G.jsx)(r,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),F(`printers.aiDetection.${e}`)]})})(),n&&(0,G.jsxs)(`button`,{onClick:()=>L(`/maintenance`),className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs cursor-pointer hover:opacity-80 transition-opacity ${n.due_count>0?`bg-status-error/20 text-status-error`:n.warning_count>0?`bg-status-warning/20 text-status-warning`:`bg-status-ok/20 text-status-ok`}`,title:n.due_count>0||n.warning_count>0?`${n.due_count>0?`${n.due_count} maintenance due`:``}${n.due_count>0&&n.warning_count>0?`, `:``}${n.warning_count>0?`${n.warning_count} due soon`:``} - Click to view`:F(`printers.maintenanceUpToDate`),children:[(0,G.jsx)(ed,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),n.due_count>0||n.warning_count>0?n.due_count+n.warning_count:`OK`]}),zn>0&&(0,G.jsxs)(`button`,{onClick:()=>L(`/queue`),className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs bg-indigo-100 dark:bg-indigo-500/20 text-indigo-700 dark:text-indigo-400 hover:opacity-80 transition-opacity`,title:F(`printers.queue.inQueue`,{count:zn}),children:[(0,G.jsx)(qc,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),zn]}),x&&nn?.current_version&&nn?.latest_version?(0,G.jsxs)(`button`,{onClick:()=>Ut(!0),className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs hover:opacity-80 transition-opacity ${nn.update_available?`bg-orange-100 dark:bg-orange-500/20 text-orange-700 dark:text-orange-400`:`bg-status-ok/20 text-status-ok`}`,title:nn.update_available?F(`printers.firmwareUpdateAvailable`,{current:nn.current_version,latest:nn.latest_version}):F(`printers.firmwareUpToDate`,{version:nn.current_version}),children:[nn.update_available?(0,G.jsx)(Ys,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}):(0,G.jsx)(xs,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),nn.current_version]}):W?.firmware_version?(0,G.jsx)(`span`,{className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs bg-bambu-dark-tertiary/50 text-bambu-gray`,children:W.firmware_version}):null,W?.connected&&[`X1C`,`X1`,`X1E`,`X2D`,`P2S`,`H2D`,`H2D Pro`,`H2C`,`H2S`].includes(e.model??``)&&(0,G.jsx)(`span`,{className:`flex items-center px-2 py-1 rounded-full text-xs ${W.door_open?`bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`:`bg-status-ok/20 text-status-ok`}`,title:W.door_open?F(`printers.door.open`):F(`printers.door.closed`),children:W.door_open?(0,G.jsx)(Js,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}):(0,G.jsx)(qs,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`})})]})})]}),ee&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50`,children:(0,G.jsx)(Ld,{className:`w-full max-w-md mx-4`,children:(0,G.jsxs)(zd,{children:[(0,G.jsxs)(`div`,{className:`flex items-start gap-3 mb-4`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-full bg-red-100 dark:bg-red-500/20`,children:(0,G.jsx)(Iu,{className:`w-[var(--pc-i5,1.25rem)] h-[var(--pc-i5,1.25rem)] text-red-600 dark:text-red-400`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white`,children:F(`printers.confirm.deleteTitle`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:F(`printers.confirm.deleteMessage`,{name:e.name})})]})]}),(0,G.jsx)(`div`,{className:`bg-bambu-dark rounded-lg p-3 mb-4`,children:(0,G.jsxs)(`label`,{className:`flex items-start gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:ne,onChange:e=>re(e.target.checked),className:`mt-0.5 w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] rounded border-bambu-gray bg-bambu-dark-secondary text-bambu-green focus:ring-bambu-green focus:ring-offset-0`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:F(`printers.deleteArchives`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:F(ne?`printers.confirm.deleteArchivesNote`:`printers.confirm.keepArchivesNote`)})]})]})}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{te(!1),re(!0)},children:F(`common.cancel`)}),(0,G.jsx)(Q,{variant:`danger`,onClick:()=>{er.mutate({deleteArchives:ne}),te(!1),re(!0)},children:`Delete`})]})]})})}),e.is_active===!1?(0,G.jsx)(G.Fragment,{children:r===`compact`?(0,G.jsxs)(`div`,{className:`mt-2 flex items-center gap-2 px-2 py-1.5 rounded-full bg-amber-50 dark:bg-amber-500/15 border border-amber-300 dark:border-amber-500/30`,children:[(0,G.jsx)(ed,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] text-amber-600 dark:text-amber-400 shrink-0`}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t11,11px)] text-amber-700 dark:text-amber-400 font-medium truncate`,children:F(`printers.maintenance.pillLabel`)})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-2`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] uppercase tracking-wider text-bambu-gray font-medium`,children:F(`printers.status.title`,`Status`)}),(0,G.jsx)(`div`,{className:`flex-1 h-[2px] bg-bambu-dark-tertiary`})]}),(0,G.jsxs)(`div`,{className:`p-3 bg-amber-50 dark:bg-amber-500/10 border border-amber-300 dark:border-amber-500/30 rounded-[10px] flex items-center gap-3`,children:[(0,G.jsx)(ed,{className:`w-6 h-6 text-amber-600 dark:text-amber-400 shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-sm text-amber-700 dark:text-amber-400 font-medium`,children:F(`printers.maintenance.title`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:F(`printers.maintenance.subtitle`)})]}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,disabled:Ar.isPending||!z(`printers:update`),onClick:()=>Ar.mutate(!0),title:z(`printers:update`)?void 0:F(`printers.permission.noEdit`),children:F(`printers.maintenance.exitButton`)})]})]})}):W?.connected&&(0,G.jsxs)(G.Fragment,{children:[r===`compact`?(()=>{let e=W.hms_errors?Dm(W.hms_errors):[],t=W.state===`FAILED`||e.length>0,n=W.state===`RUNNING`||W.state===`PAUSE`?Math.max(0,Math.min(100,W.progress||0)):qn||t?100:0,r=W.state===`RUNNING`||W.state===`PAUSE`,i=t?`bg-status-error`:W.state===`PAUSE`?`bg-status-warning`:`bg-bambu-green`,a=r&&W.remaining_time!=null&&W.remaining_time>0,o=r&&W.layer_num!=null&&W.total_layers!=null&&W.total_layers>0;return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`relative mt-2 flex items-center gap-2`,children:[(0,G.jsx)(`div`,{className:`h-1.5 min-w-0 flex-1 overflow-hidden rounded-full bg-bambu-dark-tertiary`,children:(0,G.jsx)(`div`,{className:`${i} h-1.5 rounded-full transition-all`,style:{width:`${n}%`}})}),(0,G.jsx)(`span`,{className:`w-9 shrink-0 text-right text-[length:var(--pc-t11,11px)] leading-none ${r?`text-white`:`text-bambu-gray`}`,children:r?`${Math.round(n)}%`:`---%`})]}),(0,G.jsxs)(`div`,{className:`mt-1 flex min-h-[14px] items-center gap-2 overflow-hidden text-[length:var(--pc-t11,11px)] leading-none text-bambu-gray`,children:[a&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`span`,{className:`flex shrink-0 items-center gap-1`,children:[(0,G.jsx)(js,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),op(W.remaining_time*60)]}),(0,G.jsxs)(`span`,{className:`shrink-0 font-medium text-bambu-green`,title:F(`printers.estimatedCompletion`),children:[`ETA `,ap(W.remaining_time,g,F)]})]}),o&&(0,G.jsxs)(`span`,{className:`flex min-w-0 items-center gap-1 truncate`,children:[(0,G.jsx)(qc,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] shrink-0`}),W.layer_num,`/`,W.total_layers]})]})]})})():(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-2`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] uppercase tracking-wider text-bambu-gray font-medium`,children:F(`printers.status.title`,`Status`)}),(0,G.jsx)(`div`,{className:`flex-1 h-[2px] bg-bambu-dark-tertiary`})]}),(()=>{let t=!!(W.current_print&&(W.state===`RUNNING`||W.state===`PAUSE`)),n=!t&&Kn&&Yn,r=t?Jn:n?Yn.name:null,i=t?W.cover_url:n?Yn.coverUrl:null,a=t?W.progress||0:n?100:0,o=W.printable_objects_count??0,s=t&&o!==1&&z(`printers:control`);return(0,G.jsxs)(`div`,{className:`p-2 bg-bambu-dark rounded-[10px] relative overflow-hidden`,children:[(0,G.jsxs)(`button`,{onClick:()=>Ve(!0),disabled:!s,className:`absolute top-2 right-2 p-1.5 rounded transition-colors z-10 ${s?`text-bambu-gray hover:text-white hover:bg-white/10`:`text-bambu-gray/30 cursor-not-allowed`}`,title:z(`printers:control`)?F(t?o===1?`printers.skipObjects.requiresMultiple`:`printers.skipObjects.tooltip`:`printers.skipObjects.onlyWhilePrinting`):F(`printers.permission.noControl`),children:[(0,G.jsx)(TT,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`}),Fr&&Fr.skipped_count>0&&(0,G.jsx)(`span`,{className:`absolute -top-1 -right-1 min-w-[16px] h-4 px-1 flex items-center justify-center text-[length:var(--pc-t10,10px)] font-bold bg-red-500 text-white rounded-full`,children:Fr.skipped_count})]}),(0,G.jsxs)(`div`,{className:`flex items-stretch gap-2`,children:[(0,G.jsx)(uke,{url:i,printName:r||void 0,className:`w-24 h-24 max-[520px]:w-20 max-[520px]:h-20`}),(0,G.jsxs)(`div`,{className:`flex h-24 max-[520px]:h-20 min-w-0 flex-1 flex-col justify-between pt-1`,children:[(0,G.jsxs)(`div`,{className:`flex min-h-[18px] items-center gap-2 pr-8`,children:[(0,G.jsx)(`p`,{className:`min-w-0 truncate text-sm text-bambu-gray`,children:mke(W.state,W.stg_cur_name)}),Qn]}),(0,G.jsx)(`p`,{className:`min-h-[18px] truncate pr-8 text-sm ${r?`text-white`:`text-bambu-gray/70`}`,children:r||F(`printers.noActiveJob`,`No active job`)}),(0,G.jsxs)(`div`,{className:`flex h-3 items-center gap-2 text-sm`,children:[(0,G.jsx)(`div`,{className:`h-1.5 min-w-0 flex-1 rounded-full bg-bambu-dark-tertiary`,children:(0,G.jsx)(`div`,{className:`${t?W.state===`PAUSE`?`bg-status-warning`:`bg-bambu-green`:n?`bg-bambu-green`:`bg-bambu-dark-tertiary`} h-1.5 rounded-full transition-all`,style:{width:`${a}%`}})}),(0,G.jsx)(`span`,{className:`w-9 shrink-0 pr-1 text-right text-[length:var(--pc-t11,11px)] leading-none ${t||n?`text-white`:`text-bambu-gray`}`,children:t||n?`${Math.round(a)}%`:`---%`})]}),(0,G.jsx)(`div`,{className:`flex min-h-[16px] items-center gap-2 text-xs text-bambu-gray`,children:t?(0,G.jsxs)(G.Fragment,{children:[W.remaining_time!=null&&W.remaining_time>0&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(js,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),op(W.remaining_time*60)]}),(0,G.jsxs)(`span`,{className:`text-bambu-green font-medium`,title:F(`printers.estimatedCompletion`),children:[`ETA `,ap(W.remaining_time,g,F)]})]}),W.layer_num!=null&&W.total_layers!=null&&W.total_layers>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(qc,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),W.layer_num,`/`,W.total_layers]}),Hn&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,title:`Started by ${Hn}`,children:[(0,G.jsx)(Vu,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),Hn]})]}):Wn?(0,G.jsxs)(`p`,{className:`truncate`,title:Wn.print_name||Wn.filename,children:[`Last: `,Wn.print_name||Wn.filename,Wn.completed_at&&(0,G.jsxs)(`span`,{className:`ml-1 text-bambu-gray/60`,children:[`• `,np(Wn.completed_at,{month:`short`,day:`numeric`})]})]}):(0,G.jsx)(`span`,{children:F(`printers.readyToPrint`)})})]})]}),(0,G.jsx)($se,{printerId:e.id,printerModel:e.model,loadedFilamentTypes:an,loadedFilaments:on,loadedVariants:sn,variant:`panelExtension`})]})})()]}),W.temperatures&&r===`expanded`&&(()=>{let t=W.temperatures.nozzle_heating||W.temperatures.nozzle_2_heating||!1,n=W.temperatures.bed_heating||!1,r=W.temperatures.chamber_heating||!1,i=e.nozzle_count===2||W.temperatures.nozzle_2!==void 0,a=(()=>{let e=[`nozzle`];return W.temperatures.nozzle_2!==void 0&&e.push(`nozzle_2`),e.push(`bed`),W.temperatures.chamber!==void 0&&e.push(`chamber`),e})(),o=W.active_extruder===1?`L`:`R`,s=W.nozzle_rack?.find(e=>e.id===1),c=W.nozzle_rack?.find(e=>e.id===0),l=c||s,u=W.connected&&z(`printers:control`),d=u?void 0:F(`printers.permission.noControl`),f=`relative text-center px-2 py-1.5 bg-bambu-dark rounded-lg flex-1 flex flex-col justify-center items-center transition-colors ${u?`cursor-pointer hover:bg-bambu-dark-tertiary`:`cursor-default opacity-80`}`,p=hke.has(e.model??``),m=gke.has(e.model??``),h=F(m?`printers.fans.exhaust`:`printers.fans.chamber`),g=p&&(!m||W.exhaust_fan_present),_=[{key:`part`,label:F(`printers.fans.partCooling`),value:W.cooling_fan_speed??0,Icon:ac,activeClass:`text-cyan-600 dark:text-cyan-400`},...W.left_aux_fan_speed==null?[]:[{key:`aux2`,label:F(`printers.fans.leftAuxiliary`),value:W.left_aux_fan_speed,Icon:Qu,activeClass:`text-indigo-600 dark:text-indigo-400`}],{key:`aux`,label:F(`printers.fans.auxiliary`),value:W.big_fan1_speed??0,Icon:Qu,activeClass:`text-blue-600 dark:text-blue-400`},...g?[{key:`chamber`,label:h,value:W.big_fan2_speed??0,Icon:No,activeClass:`text-green-600 dark:text-green-400`}]:[]];return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`mt-2 flex items-stretch gap-1.5 flex-wrap`,children:[(0,G.jsxs)(`div`,{className:f,title:d,onClick:()=>u&&Fe(Pe===`nozzle-temp`?null:`nozzle-temp`),children:[(0,G.jsx)(`button`,{type:`button`,className:`absolute top-0.5 right-0.5 p-0.5 rounded text-bambu-gray hover:text-white hover:bg-white/10 transition-colors`,title:F(`printers.heaterHistory.openLabel`,`View heater history`),onClick:e=>{e.stopPropagation(),Ft({initialKind:`nozzle`,availableKinds:a})},children:(0,G.jsx)(ls,{className:`w-[var(--pc-i25,0.625rem)] h-[var(--pc-i25,0.625rem)]`})}),(0,G.jsx)(cG,{className:`w-[var(--pc-i35,0.875rem)] h-[var(--pc-i35,0.875rem)] mb-0.5`,color:`text-orange-400`,isHeating:t}),W.temperatures.nozzle_2===void 0?l?(0,G.jsx)(sG,{slot:l,index:0,activeStatus:!0,filamentName:l.filament_id?cn?.[l.filament_id]?.name:void 0,children:(0,G.jsxs)(`div`,{className:`cursor-default`,children:[(0,G.jsx)(`p`,{className:`text-[length:var(--pc-t9,9px)] text-bambu-gray`,children:F(`printers.temperatures.nozzle`)}),(0,G.jsxs)(`p`,{className:`text-[length:var(--pc-t11,11px)] text-white`,children:[Math.round(W.temperatures.nozzle||0),`°C`]})]})}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`p`,{className:`text-[length:var(--pc-t9,9px)] text-bambu-gray`,children:F(`printers.temperatures.nozzle`)}),(0,G.jsxs)(`p`,{className:`text-[length:var(--pc-t11,11px)] text-white`,children:[Math.round(W.temperatures.nozzle||0),`°C`]})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`p`,{className:`text-[length:var(--pc-t9,9px)] text-bambu-gray`,children:`L / R`}),(0,G.jsxs)(`p`,{className:`text-[length:var(--pc-t11,11px)] text-white`,children:[Math.round(W.temperatures.nozzle||0),`° / `,Math.round(W.temperatures.nozzle_2||0),`°`]})]}),Pe===`nozzle-temp`&&(i?(0,G.jsx)(mG,{title:`Set Nozzle Temperatures`,widthClass:`w-[300px]`,popoverWidth:300,popoverHeight:260,isPending:_r.isPending,onClose:()=>Fe(null),children:(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2 px-3 py-2.5`,children:[(0,G.jsx)(hG,{label:`Left Temp`,current:W.temperatures.nozzle,target:W.temperatures.nozzle_target,isActive:o===`L`,isPending:_r.isPending,onSubmit:e=>_r.mutate({target:e,nozzle:1}),options:Tm(O,`C`)}),(0,G.jsx)(hG,{label:`Right Temp`,current:W.temperatures.nozzle_2,target:W.temperatures.nozzle_2_target,isActive:o===`R`,isPending:_r.isPending,onSubmit:e=>_r.mutate({target:e,nozzle:0}),options:Tm(O,`C`)})]})}):(0,G.jsx)(mG,{title:`Set Nozzle Temperature`,unit:`°C`,customMin:0,customMax:320,isPending:_r.isPending,options:Tm(O,`C`),onClose:()=>Fe(null),onSubmit:e=>_r.mutate({target:e,nozzle:W.active_extruder??0})}))]}),(0,G.jsxs)(`div`,{className:f,title:d,onClick:()=>u&&Fe(Pe===`bed-temp`?null:`bed-temp`),children:[(0,G.jsx)(`button`,{type:`button`,className:`absolute top-0.5 right-0.5 p-0.5 rounded text-bambu-gray hover:text-white hover:bg-white/10 transition-colors`,title:F(`printers.heaterHistory.openLabel`,`View heater history`),onClick:e=>{e.stopPropagation(),Ft({initialKind:`bed`,availableKinds:a})},children:(0,G.jsx)(ls,{className:`w-[var(--pc-i25,0.625rem)] h-[var(--pc-i25,0.625rem)]`})}),(0,G.jsx)(cG,{className:`w-[var(--pc-i35,0.875rem)] h-[var(--pc-i35,0.875rem)] mb-0.5`,color:`text-blue-400`,isHeating:n}),(0,G.jsx)(`p`,{className:`text-[length:var(--pc-t9,9px)] text-bambu-gray`,children:F(`printers.temperatures.bed`)}),(0,G.jsxs)(`p`,{className:`text-[length:var(--pc-t11,11px)] text-white`,children:[Math.round(W.temperatures.bed||0),`°C`]}),Pe===`bed-temp`&&(0,G.jsx)(mG,{title:`Set Bed Temperature`,unit:`°C`,customMin:0,customMax:140,isPending:vr.isPending,options:Tm(k,`C`),onClose:()=>Fe(null),onSubmit:e=>vr.mutate(e)})]}),W.temperatures.chamber!==void 0&&(()=>{let e=W.supports_chamber_heater===!0;return(0,G.jsxs)(`div`,{className:e?f:`relative text-center px-2 py-1.5 bg-bambu-dark rounded-lg flex-1 flex flex-col justify-center items-center`,title:e?d:void 0,onClick:e?()=>u&&Fe(Pe===`chamber-temp`?null:`chamber-temp`):void 0,children:[(0,G.jsx)(`button`,{type:`button`,className:`absolute top-0.5 right-0.5 p-0.5 rounded text-bambu-gray hover:text-white hover:bg-white/10 transition-colors`,title:F(`printers.heaterHistory.openLabel`,`View heater history`),onClick:e=>{e.stopPropagation(),Ft({initialKind:`chamber`,availableKinds:a})},children:(0,G.jsx)(ls,{className:`w-[var(--pc-i25,0.625rem)] h-[var(--pc-i25,0.625rem)]`})}),(0,G.jsx)(cG,{className:`w-[var(--pc-i35,0.875rem)] h-[var(--pc-i35,0.875rem)] mb-0.5`,color:`text-green-400`,isHeating:r}),(0,G.jsx)(`p`,{className:`text-[length:var(--pc-t9,9px)] text-bambu-gray`,children:F(`printers.temperatures.chamber`)}),(0,G.jsxs)(`p`,{className:`text-[length:var(--pc-t11,11px)] text-white`,children:[Math.round(W.temperatures.chamber||0),`°C`]}),e&&Pe===`chamber-temp`&&(0,G.jsx)(mG,{title:`Set Chamber Temperature`,unit:`°C`,customMin:0,customMax:65,isPending:yr.isPending,options:Tm(A,`C`),onClose:()=>Fe(null),onSubmit:e=>yr.mutate(e)})]})})(),i&&(0,G.jsx)(QOe,{leftSlot:s,rightSlot:c,activeNozzle:o,filamentInfo:cn,children:(0,G.jsxs)(`div`,{className:`relative text-center px-3 py-1.5 bg-bambu-dark rounded-lg h-full flex flex-col justify-center items-center transition-colors ${u?`cursor-pointer hover:bg-bambu-dark-tertiary`:`cursor-default opacity-80`}`,title:u?F(`printers.activeNozzle`,{nozzle:F(o===`L`?`common.left`:`common.right`)}):d,onClick:()=>u&&Fe(Pe===`nozzle-select`?null:`nozzle-select`),children:[(0,G.jsx)(oke,{className:`w-[var(--pc-i35,0.875rem)] h-[var(--pc-i35,0.875rem)] mb-0.5 text-amber-600 dark:text-amber-400`}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`span`,{className:`text-[length:var(--pc-t11,11px)] font-bold ${o===`L`?`text-amber-700 dark:text-amber-400`:`text-gray-500`}`,children:[`L`,s?.nozzle_diameter?` ${s.nozzle_diameter}`:``]}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t9,9px)] text-bambu-gray/40`,children:`·`}),(0,G.jsxs)(`span`,{className:`text-[length:var(--pc-t11,11px)] font-bold ${o===`R`?`text-amber-700 dark:text-amber-400`:`text-gray-500`}`,children:[`R`,c?.nozzle_diameter?` ${c.nozzle_diameter}`:``]})]}),(0,G.jsx)(`p`,{className:`text-[length:var(--pc-t9,9px)] text-bambu-gray`,children:F(`printers.temperatures.nozzle`)}),Pe===`nozzle-select`&&(0,G.jsx)(mG,{title:`Set Nozzle Selection`,widthClass:`w-[300px]`,popoverWidth:300,popoverHeight:140,isPending:xr.isPending,options:[{label:`Left`,value:1},{label:`Right`,value:0}],onClose:()=>Fe(null),onSubmit:e=>xr.mutate(e)})]})}),W.nozzle_rack&&W.nozzle_rack.some(e=>e.id>=2)&&(0,G.jsx)($Oe,{slots:W.nozzle_rack,filamentInfo:cn})]}),(0,G.jsx)(`div`,{className:`mt-2 flex items-center gap-1.5`,children:_.map(({key:e,label:t,value:n,Icon:r,activeClass:i})=>{let a=n>0;return(0,G.jsxs)(`div`,{className:`relative px-2 py-1.5 bg-bambu-dark rounded-lg flex-1 min-w-0 flex items-center justify-center gap-1 transition-colors ${u?`cursor-pointer hover:bg-bambu-dark-tertiary`:`cursor-default opacity-80`}`,title:u?t:d,onClick:()=>u&&Fe(Pe===`fan-${e}`?null:`fan-${e}`),children:[(0,G.jsx)(r,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] shrink-0 ${a?i:`text-bambu-gray/50`}`}),(0,G.jsxs)(`span`,{className:`text-[length:var(--pc-t10,10px)] leading-none ${a?`text-white`:`text-bambu-gray/50`}`,children:[n,`%`]}),Pe===`fan-${e}`&&(0,G.jsx)(mG,{title:`Set ${t} Speed`,unit:`%`,customMin:0,customMax:100,isPending:br.isPending,options:Tm(j,`%`),onClose:()=>Fe(null),onSubmit:t=>br.mutate({fan:e,speed:t})})]},e)})})]})})(),r===`expanded`&&qn&&gr,r===`expanded`&&(()=>{let t=W.state===`RUNNING`,n=W.state===`PAUSE`,r=t||n,i=fr.isPending||pr.isPending||mr.isPending,a=`bg-bambu-dark text-bambu-gray/50 cursor-not-allowed opacity-50`,o=`flex h-8 w-8 items-center justify-center rounded-lg text-xs font-medium transition-colors disabled:opacity-50 disabled:cursor-not-allowed`,s=`flex h-8 w-20 items-center justify-center gap-1 px-2 rounded-lg text-xs font-medium transition-colors`;return(0,G.jsxs)(`div`,{className:`mt-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-2`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] uppercase tracking-wider text-bambu-gray font-medium`,children:F(`printers.controls`)}),(0,G.jsx)(`div`,{className:`flex-1 h-[2px] bg-bambu-dark-tertiary`})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-start justify-between gap-x-2 gap-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 min-w-0`,children:[(0,G.jsx)(`button`,{onClick:()=>Sr.mutate(!W.chamber_light),disabled:!W.connected||Sr.isPending||!z(`printers:control`),className:`${o} ${W.chamber_light?`bg-yellow-50 dark:bg-yellow-500/10 text-yellow-700 dark:text-yellow-400 hover:bg-yellow-500/20`:`bg-bambu-dark text-bambu-gray/50 hover:bg-bambu-dark-tertiary hover:text-white`}`,title:z(`printers:control`)?W.chamber_light?F(`printers.chamberLightOff`):F(`printers.chamberLightOn`):F(`printers.permission.noControl`),children:(0,G.jsx)(wT,{on:W.chamber_light??!1,className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),[`P2S`,`X2D`,`H2D`,`H2C`,`H2S`].includes(e.model??``)&&(()=>{let t=W.airduct_mode===1,n=t?mc:hu,r=t?`text-orange-600 dark:text-orange-400`:`text-sky-600 dark:text-sky-400`,i=t?`bg-orange-50 dark:bg-orange-500/10 text-orange-700 dark:text-orange-400 hover:bg-orange-500/20`:`bg-sky-50 dark:bg-sky-500/10 text-sky-700 dark:text-sky-400 hover:bg-sky-500/20`;return(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`button`,{onClick:()=>je(Ae===e.id?null:e.id),disabled:!z(`printers:control`),className:`${o} ${i}`,title:`${F(`printers.airduct.title`)}: ${F(t?`printers.airduct.heating`:`printers.airduct.cooling`)}`,children:(0,G.jsx)(n,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] ${r}`})}),Ae===e.id&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-40`,onClick:()=>je(null)}),(0,G.jsx)(`div`,{className:`absolute bottom-full left-0 mb-1 z-50 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg py-1 min-w-[130px]`,children:[{mode:`cooling`,label:F(`printers.airduct.cooling`),modeId:0},{mode:`heating`,label:F(`printers.airduct.heating`),modeId:1}].map(({mode:e,label:t,modeId:n})=>(0,G.jsxs)(`button`,{onClick:()=>{wr.mutate(e),je(null)},className:`w-full text-left px-3 py-1.5 text-xs transition-colors flex items-center gap-2 ${W.airduct_mode===n?`text-bambu-green bg-bambu-green/10`:`text-white hover:bg-bambu-dark-tertiary`}`,children:[e===`heating`?(0,G.jsx)(mc,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}):(0,G.jsx)(hu,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),t]},e))})]})]})})(),(()=>{let t=z(`printers:control`),n=r||!t,i=`flex h-8 w-8 items-center justify-center rounded bg-indigo-100 dark:bg-indigo-500/15 text-indigo-700 dark:text-indigo-300 transition-colors hover:bg-indigo-200 dark:hover:bg-indigo-500/30 disabled:cursor-not-allowed disabled:opacity-50`,a=Eee(e.model),s=e=>{let t=a?e===`up`:e===`down`;Tr.mutate({distance:t?Ie:-Ie})},c=(e,t)=>{Er.mutate({x:e,y:t})},l=e=>{Dr.mutate(e)};return(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`button`,{onClick:()=>Ne(Me===e.id?null:e.id),disabled:n,className:`${o} ${n?`bg-bambu-dark text-bambu-gray/50 cursor-not-allowed`:`bg-indigo-50 dark:bg-indigo-500/10 text-indigo-700 dark:text-indigo-400 hover:bg-indigo-500/20`}`,title:F(t?r?`printers.bedJog.disabledWhilePrinting`:`printers.bedJog.title`:`printers.permission.noControl`),children:(0,G.jsx)(vl,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),Me===e.id&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-40`,onClick:()=>Ne(null)}),(0,G.jsxs)(`div`,{className:`absolute bottom-full left-0 mb-1 z-50 flex w-[216px] flex-col overflow-hidden rounded-xl border border-bambu-dark-tertiary bg-bambu-dark-secondary shadow-2xl`,children:[(0,G.jsx)(`div`,{className:`shrink-0 px-3 py-2.5 text-center text-sm font-medium text-white`,children:F(`printers.bedJog.title`)}),(0,G.jsx)(`div`,{className:`h-px bg-bambu-dark-tertiary`}),(0,G.jsxs)(`div`,{className:`flex items-start gap-1.5 bg-yellow-500/10 px-3 py-2 text-[length:var(--pc-t11,11px)] leading-snug text-yellow-700 dark:text-yellow-400`,children:[(0,G.jsx)(Iu,{className:`mt-0.5 h-3.5 w-3.5 shrink-0`}),(0,G.jsx)(`span`,{children:F(`printers.bedJog.limitWarning`)})]}),(0,G.jsx)(`div`,{className:`h-px bg-bambu-dark-tertiary`}),(0,G.jsx)(`div`,{className:`flex justify-center px-3 py-2.5`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-center gap-3`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-3 gap-1`,children:[(0,G.jsx)(`div`,{}),(0,G.jsx)(`button`,{onClick:()=>c(0,Ie),disabled:Er.isPending,className:i,"aria-label":`Move Y forward`,children:(0,G.jsx)(Ho,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(`div`,{}),(0,G.jsx)(`button`,{onClick:()=>c(-Ie,0),disabled:Er.isPending,className:i,"aria-label":`Move X left`,children:(0,G.jsx)(Lo,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(`button`,{onClick:()=>{Ne(null),Or.mutate(`all`)},disabled:Or.isPending,className:i,"aria-label":F(`printers.bedJog.homeZ`),children:(0,G.jsx)(zc,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(`button`,{onClick:()=>c(Ie,0),disabled:Er.isPending,className:i,"aria-label":`Move X right`,children:(0,G.jsx)(zo,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(`div`,{}),(0,G.jsx)(`button`,{onClick:()=>c(0,-Ie),disabled:Er.isPending,className:i,"aria-label":`Move Y back`,children:(0,G.jsx)(Io,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(`div`,{})]}),(0,G.jsxs)(`div`,{className:`flex flex-col items-center gap-1`,children:[(0,G.jsx)(`button`,{onClick:()=>s(`up`),disabled:Tr.isPending,className:i,"aria-label":F(a?`printers.bedJog.toolheadUp`:`printers.bedJog.up`),children:(0,G.jsx)(Ho,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(`div`,{className:`flex h-8 w-8 items-center justify-center text-bambu-gray/80`,children:(0,G.jsx)(qc,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(`button`,{onClick:()=>s(`down`),disabled:Tr.isPending,className:i,"aria-label":F(a?`printers.bedJog.toolheadDown`:`printers.bedJog.down`),children:(0,G.jsx)(Io,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})})]}),(0,G.jsxs)(`div`,{className:`flex flex-col items-center gap-1`,children:[(0,G.jsx)(`button`,{onClick:()=>l(-Ie),disabled:Dr.isPending,className:i,"aria-label":`Retract filament`,children:(0,G.jsx)(Ho,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(`div`,{className:`flex h-8 w-8 items-center justify-center text-bambu-gray/80`,children:(0,G.jsx)(`span`,{className:`text-sm font-semibold leading-none`,children:`E`})}),(0,G.jsx)(`button`,{onClick:()=>l(Ie),disabled:Dr.isPending,className:i,"aria-label":`Extrude filament`,children:(0,G.jsx)(Io,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})})]})]})}),(0,G.jsx)(`div`,{className:`h-px bg-bambu-dark-tertiary`}),(0,G.jsxs)(`div`,{className:`px-3 pt-2.5 pb-3`,children:[(0,G.jsx)(`div`,{className:`mb-1 text-[length:var(--pc-t9,9px)] uppercase tracking-wider text-bambu-gray/70`,children:F(`printers.bedJog.step`)}),(0,G.jsx)(`div`,{className:`flex gap-1`,children:[1,10,50].map(e=>(0,G.jsx)(`button`,{onClick:()=>Le(e),className:`flex-1 px-1 py-1 rounded text-[length:var(--pc-t10,10px)] transition-colors ${Ie===e?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:e},e))})]})]})]})]})})(),(0,G.jsxs)(`div`,{className:`inline-flex rounded-lg ${e.plate_detection_enabled?`ring-1 ring-green-500`:``}`,children:[(0,G.jsx)(`button`,{onClick:$r,disabled:!W.connected||kr.isPending||!z(`printers:update`),className:`${o} rounded-r-none ${e.plate_detection_enabled?`bg-green-50 dark:bg-green-500/10 text-green-700 dark:text-green-400 hover:bg-green-500/20`:`bg-bambu-dark text-bambu-gray/50 hover:bg-bambu-dark-tertiary hover:text-white`}`,title:z(`printers:update`)?e.plate_detection_enabled?F(`printers.plateDetection.enabledClick`):F(`printers.plateDetection.disabledClick`):F(`printers.plateDetection.noPermission`),children:kr.isPending?(0,G.jsx)(Y,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] animate-spin`}):(0,G.jsx)(Yl,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(`button`,{onClick:ei,disabled:!W.connected||Kt||!z(`printers:update`),className:`flex h-8 w-8 items-center justify-center rounded-r-lg border-l border-bambu-dark-tertiary transition-colors disabled:opacity-50 disabled:cursor-not-allowed ${e.plate_detection_enabled?`bg-green-50 dark:bg-green-500/10 text-green-700 dark:text-green-400 hover:bg-green-500/20`:`bg-bambu-dark text-bambu-gray/50 hover:bg-bambu-dark-tertiary hover:text-white`}`,title:z(`printers:update`)?F(`printers.plateDetection.manageCalibration`):F(`printers.plateDetection.noPermission`),children:Kt?(0,G.jsx)(Y,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] animate-spin`}):(0,G.jsx)(ps,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})})]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`button`,{"data-testid":`speed-control`,onClick:()=>ke(Oe===e.id?null:e.id),disabled:!r||!z(`printers:control`),className:`${o} ${r?`bg-amber-50 dark:bg-amber-500/10 text-amber-700 dark:text-amber-400 hover:bg-amber-500/20`:`bg-bambu-dark text-bambu-gray/50 cursor-not-allowed`}`,title:r?F(`printers.speed.title`):void 0,children:(0,G.jsx)(wc,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),Oe===e.id&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-40`,onClick:()=>ke(null)}),(0,G.jsx)(`div`,{className:`absolute bottom-full left-0 mb-1 z-50 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg py-1 min-w-[130px]`,children:[{mode:1,label:F(`printers.speed.silent`)},{mode:2,label:F(`printers.speed.standard`)},{mode:3,label:F(`printers.speed.sport`)},{mode:4,label:F(`printers.speed.ludicrous`)}].map(({mode:e,label:t})=>(0,G.jsx)(`button`,{onClick:()=>{Cr.mutate(e),ke(null)},className:`w-full text-left px-3 py-1.5 text-xs transition-colors ${W.speed_level===e?`text-bambu-green bg-bambu-green/10`:`text-white hover:bg-bambu-dark-tertiary`}`,children:t},e))})]})]})]}),(0,G.jsxs)(`div`,{className:`ml-auto flex items-center justify-end gap-2 flex-shrink-0`,children:[(()=>{let e=!r||i||!z(`printers:control`);return(0,G.jsxs)(`button`,{onClick:()=>n?ze(!0):De(!0),disabled:e,className:`
                           ${s}
                           ${e?a:n?`bg-bambu-green/20 text-bambu-green hover:bg-bambu-green/30`:`bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400 hover:bg-yellow-500/30`}
                         `,title:z(`printers:control`)?F(n?`printers.resume`:`printers.pause`):F(`printers.permission.noControl`),children:[n?(0,G.jsx)(Ml,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}):(0,G.jsx)(El,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),F(n?`printers.resume`:`printers.pause`)]})})(),(()=>{let e=!r||i||!z(`printers:control`);return(0,G.jsxs)(`button`,{onClick:()=>Te(!0),disabled:e,className:`
                           ${s}
                           ${e?a:`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400 hover:bg-red-500/30`}
-                        `,title:z(`printers:control`)?F(`printers.stop`):F(`printers.permission.noControl`),children:[(0,G.jsx)(yu,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),F(`printers.stop`)]})})()]})]})]})})(),(En?.length>0||W.vt_tray.length>0)&&r===`expanded`&&(()=>{let t=En.filter(e=>e.tray.length>1),n=En.filter(e=>e.tray.length===1),r=En.length>0&&W.vt_tray.length>0,g=!(r&&xe),_=e.nozzle_count===2||W?.temperatures?.nozzle_2!==void 0,v=vG[i]??1,y=e=>`${Math.round(e*v*1e3)/1e3}rem`,b=`3.5rem`,x={minWidth:b},S={minWidth:b,maxWidth:y(7.25)},C=e=>({gridTemplateColumns:`repeat(${e}, minmax(${b}, 1fr))`}),w=(W.state===`RUNNING`||W.state===`PAUSE`)&&Array.isArray(W.ams_mapping)?W.ams_mapping:[],T=e=>{let t=Math.max(1,e),n=`calc(${t} * ${b} + ${Math.max(0,t-1)} * 0.25rem + 1rem)`;return{flex:`1 1 ${n}`,minWidth:n}};return(0,G.jsxs)(`div`,{className:`mt-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-2`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] uppercase tracking-wider text-bambu-gray font-medium`,children:F(`printers.filaments`)}),(0,G.jsx)(oke,{state:W.ams_filament_backup,onClick:()=>be(!0)}),(0,G.jsx)(`div`,{className:`flex-1 h-[2px] bg-bambu-dark-tertiary`}),r&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(ske,{hidden:xe,onClick:Ce}),(0,G.jsx)(`div`,{className:`w-3 h-[2px] bg-bambu-dark-tertiary`})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-2`,children:[t.map(t=>{let n=tG(t.id,xn,wn,Cn);return(0,G.jsxs)(`div`,{style:T(4),className:`min-w-0 p-2 bg-bambu-dark rounded-[10px] space-y-1`,children:[(0,G.jsxs)(`div`,{className:`flex w-full min-h-7 items-center justify-between gap-2 rounded-lg bg-bambu-dark-secondary px-2 py-1`,children:[(0,G.jsxs)(`div`,{className:`flex min-w-0 flex-1 items-center gap-1.5`,children:[(0,G.jsx)(gG,{ams:t,printerId:e.id,label:gp(t.id,t.tray.length),amsLabels:pn,canEdit:z(`printers:update`),onSaved:mn,children:(0,G.jsx)(`span`,{className:`block truncate text-[length:var(--pc-t10,10px)] text-white font-medium cursor-default select-none`,children:pn?.[t.id]||gp(t.id,t.tray.length)})}),n?.kind===`inlet`?(0,G.jsx)(eG,{inlet:n.inlet,title:F(`printers.amsSwitchInletTooltip`,{inlet:n.inlet,side:pp[n.inlet]})}):_&&n?.kind===`nozzle`?(0,G.jsx)($W,{side:n.side}):null]}),(t.humidity!=null||t.temp!=null)&&(0,G.jsxs)(`div`,{className:`flex shrink-0 items-center gap-1.5`,children:[t.humidity!=null&&(0,G.jsx)(oG,{humidity:t.humidity,goodThreshold:a?.humidityGood,fairThreshold:a?.humidityFair,onClick:()=>Nt({amsId:t.id,amsLabel:gp(t.id,t.tray.length),mode:`humidity`}),compact:!0}),t.temp!=null&&(0,G.jsx)(`div`,{className:`mr-1`,children:(0,G.jsx)(sG,{temp:t.temp,goodThreshold:a?.tempGood,fairThreshold:a?.tempFair,onClick:()=>Nt({amsId:t.id,amsLabel:gp(t.id,t.tray.length),mode:`temperature`}),compact:!0})}),(W.supports_drying||W.drying_screen_only)&&(t.module_type===`n3f`||t.module_type===`n3s`)&&z(`printers:control`)&&(0,G.jsx)(`button`,{disabled:W.drying_screen_only||!!(t.dry_sf_reason?.length&&t.dry_time===0),onClick:e=>{t.dry_time>0?sr.mutate(t.id):Ze===t.id?Qe(null):yt(t,e.currentTarget)},className:`ml-1 flex items-center gap-0.5 px-1 py-0.5 rounded text-[length:var(--pc-t9,9px)] transition-colors ${t.dry_time>0?`bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400`:W.drying_screen_only||t.dry_sf_reason?.length?`bg-bambu-dark text-bambu-gray/50 cursor-not-allowed`:`bg-bambu-dark text-bambu-gray hover:text-white hover:bg-bambu-dark/80`}`,title:W.drying_screen_only?F(`printers.drying.screenOnly`):t.dry_time>0?F(`printers.drying.stop`):t.dry_sf_reason?.length?F(YOe(t.dry_sf_reason)):F(`printers.drying.start`),children:(0,G.jsx)(mc,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`})})]})]}),t.dry_time>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 rounded-lg bg-amber-50 dark:bg-amber-500/10 px-2 py-1 text-[length:var(--pc-t9,9px)]`,children:[(0,G.jsx)(mc,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] text-amber-600 dark:text-amber-400 shrink-0`}),(0,G.jsx)(`span`,{className:`text-amber-700 dark:text-amber-400 font-medium`,children:F(`printers.drying.active`)}),t.dry_filament&&(0,G.jsx)(`span`,{className:`text-amber-700/80 dark:text-amber-300/70`,children:t.dry_target_temp==null?t.dry_filament:F(`printers.drying.targetSummary`,{filament:t.dry_filament,temp:t.dry_target_temp})}),(0,G.jsx)(`span`,{className:`text-amber-700/80 dark:text-amber-300/70`,children:F(`printers.drying.timeRemaining`,{time:t.dry_time>=60?`${Math.floor(t.dry_time/60)}h ${t.dry_time%60}m`:`${t.dry_time}m`})}),!W.drying_screen_only&&(0,G.jsx)(`button`,{onClick:()=>sr.mutate(t.id),disabled:sr.isPending,className:`ml-auto text-amber-700 dark:text-amber-400 hover:text-amber-900 dark:hover:text-amber-300 transition-colors disabled:opacity-50`,title:F(`printers.drying.stop`),children:(0,G.jsx)(td,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`})})]}),(0,G.jsx)(`div`,{className:`grid w-full gap-1`,style:C(4),children:[0,1,2,3].map(n=>{let r=t.tray[n]||t.tray.find(e=>e.id===n),i=r?.tray_type&&r.remain>=0,a=!r?.tray_type,g=cG(r),_=t.id*4+n,v=An===_,y=jn!==null&&jn===_,b=Mn!==null&&Mn===_,S=r?.tray_info_idx?cn?.[r.tray_info_idx]:null,C=ln?.[_],T=Hp(C?.preset_id,r?.tray_info_idx)?C?.preset_name:void 0,E=(r?.tray_uuid||r?.tag_uid||Pp(e.serial_number,t.id,n))?.toUpperCase(),D=E?s?.[E]:void 0,O=jp(D),k=o&&!m?p?.find(r=>r.printer_id===e.id&&r.ams_id===t.id&&r.tray_id===n):void 0,A=k?f?.find(e=>e.id===k.spoolman_spool_id):void 0,j=A&&(A.label_weight??0)>0?Math.round(Math.max(0,(A.label_weight??0)-A.weight_used)/(A.label_weight??1)*100):null,M=u?.(e.id,t.id,n),N=(()=>{let e=M?.spool;return e&&e.label_weight>0&&e.weight_used!=null?Math.round(Math.max(0,e.label_weight-e.weight_used)/e.label_weight*100):null})(),P=N===0&&i&&r.remain>0?null:N,I=O??j??P??(i?r.remain:null),L=O!==null||j!==null?`spoolman`:P===null?i?`ams`:void 0:`inventory`,R=r?.tray_type?{vendor:Vp(r)?`Bambu Lab`:`Generic`,profile:T||(A?[A.brand,A.slicer_filament_name?.split(`@`)[0].trim()||A.material].filter(Boolean).join(` `).trim():null)||M?.spool?.slicer_filament_name||S?.name||r.tray_sub_brands||r.tray_type,colorName:Tf(r.tray_color||``,r.tray_sub_brands),colorHex:r.tray_color||null,kFactor:ZW(r.k),fillLevel:I,trayUuid:r.tray_uuid||null,tagUid:r.tag_uid||null,fillSource:L}:null,B=Ir?.amsId===t.id&&Ir?.slotId===n,V=w.indexOf(_),ee=V>=0?`P${V+1}`:null,te=(0,G.jsxs)(`div`,{className:`relative w-full bg-bambu-dark-secondary rounded-lg p-1 text-center ${a?`opacity-50`:``} ${y?`ring-2 ring-amber-400 ring-offset-1 ring-offset-bambu-dark animate-pulse`:b?`ring-2 ring-red-500/60 ring-offset-1 ring-offset-bambu-dark`:v?`ring-2 ring-bambu-green ring-offset-1 ring-offset-bambu-dark`:``}`,children:[y&&(0,G.jsx)(`span`,{"aria-label":F(`printers.expectedSlot.ariaLabel`,{n:n+1}),title:F(`printers.expectedSlot.title`),className:`absolute top-0.5 left-0.5 px-1 py-px text-[length:var(--pc-t8,8px)] font-bold text-bambu-dark bg-amber-400 rounded pointer-events-none leading-none`,children:`↓`}),ee&&(0,G.jsx)(`span`,{"aria-label":F(`printers.activeJobSlot.ariaLabel`,{n:V+1}),title:F(`printers.activeJobSlot.title`,{n:V+1}),className:`absolute top-0.5 right-0.5 px-1 py-px text-[length:var(--pc-t8,8px)] font-bold text-bambu-dark bg-bambu-green rounded pointer-events-none leading-none`,children:ee}),(0,G.jsx)(JW,{trayColor:r?.tray_color,trayType:r?.tray_type,isEmpty:a,emptyKind:g,slotNumber:n+1}),(0,G.jsx)(`div`,{className:`text-[length:var(--pc-t9,9px)] text-white font-bold truncate`,children:r?.tray_type||F(g===`reset`?`ams.slotUnconfigured`:`ams.slotEmpty`)}),(0,G.jsx)(QW,{k:R?r?.k:null,reserve:Dn}),(0,G.jsx)(`div`,{className:`mt-1 h-1.5 bg-black/30 rounded-full overflow-hidden`,children:I!==null&&I>=0&&!a&&r&&(0,G.jsx)(`div`,{className:`h-full rounded-full transition-all`,style:{width:`${I}%`,backgroundColor:Ap(I)}})})]});return(0,G.jsxs)(`div`,{className:`relative group w-full`,style:x,children:[B&&(0,G.jsx)(`div`,{className:`absolute inset-0 bg-bambu-dark-tertiary/80 rounded flex items-center justify-center z-20`,children:(0,G.jsx)(Vl,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] text-bambu-green animate-spin`})}),R?(0,G.jsx)(wU,{data:R,actions:xi({amsId:t.id,slotId:n,loadTrayId:t.id*4+n,isRefreshing:B}),spoolman:{enabled:o,linkedSpoolId:k?.spoolman_spool_id??(E?s?.[E]?.id:void 0),spoolmanUrl:c,syncMode:l,onLinkSpool:o&&!k&&!M?()=>{let r=(R.trayUuid||R.tagUid||Pp(e.serial_number,t.id,n)).toUpperCase();Lt({tagUid:R.tagUid||r,trayUuid:R.trayUuid||``,printerId:e.id,amsId:t.id,trayId:n})}:void 0,onUnlinkSpool:D?.id?()=>rr.mutate(D.id):void 0},inventory:(()=>{if(o){if(m)return;let i=k,a=A;return{assignedSpool:a?{id:a.id,material:a.material,subtype:a.subtype,brand:a.brand??null,color_name:a.color_name??null,color_name_is_synthesized:a.color_name_is_synthesized,rgba:a.rgba??null,extra_colors:a.extra_colors??null,effect_type:a.effect_type??null,remainingWeightGrams:a.label_weight?Math.max(0,Math.round(a.label_weight-a.weight_used)):void 0}:null,onAssignSpool:()=>zt({printerId:e.id,amsId:t.id,trayId:n,trayInfo:{type:r?.tray_type||R.profile,material:r?.tray_type??void 0,profile:R.profile,color:R.colorHex||``,location:`${gp(t.id,t.tray.length)} Slot ${n+1}`}}),onUnassignSpool:a&&!Vp(r)?()=>h?.(a.id):void 0,isAssigned:!!i||Vp(r)}}let i=u?.(e.id,t.id,n);return{assignedSpool:i?.spool?{id:i.spool.id,material:i.spool.material,subtype:i.spool.subtype,brand:i.spool.brand,color_name:i.spool.color_name,rgba:i.spool.rgba??null,extra_colors:i.spool.extra_colors??null,effect_type:i.spool.effect_type??null,remainingWeightGrams:Math.max(0,Math.round(i.spool.label_weight-i.spool.weight_used))}:null,onAssignSpool:()=>zt({printerId:e.id,amsId:t.id,trayId:n,trayInfo:{type:r?.tray_type||R.profile,material:r?.tray_type??void 0,profile:R.profile,color:R.colorHex||``,location:`${gp(t.id,t.tray.length)} Slot ${n+1}`}}),onUnassignSpool:i&&!Vp(r)?()=>d?.(e.id,t.id,n):void 0,isAssigned:!!i||Vp(r)}})(),configureSlot:{enabled:z(`printers:control`),onConfigure:()=>Vt({amsId:t.id,trayId:n,trayCount:t.tray.length,trayType:r?.tray_type||void 0,trayColor:r?.tray_color||void 0,traySubBrands:r?.tray_sub_brands||void 0,trayInfoIdx:r?.tray_info_idx||void 0,extruderId:hp(t.id,r?.id??0,xn,wn),caliIdx:r?.cali_idx,savedPresetId:C?.preset_id})},children:te}):(0,G.jsx)(TU,{kind:g??void 0,actions:xi({amsId:t.id,slotId:n,loadTrayId:t.id*4+n,isRefreshing:B}),configureSlot:{enabled:z(`printers:control`),onConfigure:()=>Vt({amsId:t.id,trayId:n,trayCount:t.tray.length,extruderId:hp(t.id,r?.id??0,xn,wn)})},onAssignSpool:()=>zt({printerId:e.id,amsId:t.id,trayId:n,trayInfo:{type:``,material:void 0,profile:``,color:``,location:`${gp(t.id,t.tray.length)} Slot ${n+1}`}}),children:te})]},n)})})]},t.id)}),n.map(t=>{let n=tG(t.id,xn,wn,Cn),r=t.tray[0],i=r?.tray_type&&r.remain>=0,g=!r?.tray_type,v=cG(r),x=kp(t.id,r?.id??0,!1),C=An===x,T=jn!==null&&jn===x,E=Mn!==null&&Mn===x,D=r?.tray_info_idx?cn?.[r.tray_info_idx]:null,O=ln?.[x],k=Hp(O?.preset_id,r?.tray_info_idx)?O?.preset_name:void 0,A=r?.id??0,j=(r?.tray_uuid||r?.tag_uid||Pp(e.serial_number,t.id,A))?.toUpperCase(),M=j?s?.[j]:void 0,N=jp(M),P=u?.(e.id,t.id,A),I=(()=>{let e=P?.spool;return e&&e.label_weight>0&&e.weight_used!=null?Math.round(Math.max(0,e.label_weight-e.weight_used)/e.label_weight*100):null})(),L=I===0&&i&&r.remain>0?null:I,R=o&&!m?p?.find(n=>n.printer_id===e.id&&n.ams_id===t.id&&n.tray_id===A):void 0,B=R?f?.find(e=>e.id===R.spoolman_spool_id):void 0,V=B&&(B.label_weight??0)>0?Math.round(Math.max(0,(B.label_weight??0)-B.weight_used)/(B.label_weight??1)*100):null,ee=N??V??L??(i?r.remain:null),te=N!==null||V!==null?`spoolman`:L===null?i?`ams`:void 0:`inventory`,ne=r?.tray_type?{vendor:Vp(r)?`Bambu Lab`:`Generic`,profile:k||(B?[B.brand,B.slicer_filament_name?.split(`@`)[0].trim()||B.material].filter(Boolean).join(` `).trim():null)||P?.spool?.slicer_filament_name||D?.name||r.tray_sub_brands||r.tray_type,colorName:Tf(r.tray_color||``,r.tray_sub_brands),colorHex:r.tray_color||null,kFactor:ZW(r.k),fillLevel:ee,trayUuid:r.tray_uuid||null,tagUid:r.tag_uid||null,fillSource:te}:null,re=Ir?.amsId===t.id&&Ir?.slotId===A,ie=w.indexOf(x),ae=ie>=0?`P${ie+1}`:null,oe=(0,G.jsxs)(`div`,{className:`relative w-full bg-bambu-dark-secondary rounded-lg p-1 text-center ${g?`opacity-50`:``} ${T?`ring-2 ring-amber-400 ring-offset-1 ring-offset-bambu-dark animate-pulse`:E?`ring-2 ring-red-500/60 ring-offset-1 ring-offset-bambu-dark`:C?`ring-2 ring-bambu-green ring-offset-1 ring-offset-bambu-dark`:``}`,children:[T&&(0,G.jsx)(`span`,{"aria-label":F(`printers.expectedSlot.ariaLabel`,{n:1}),title:F(`printers.expectedSlot.title`),className:`absolute top-0.5 left-0.5 px-1 py-px text-[length:var(--pc-t8,8px)] font-bold text-bambu-dark bg-amber-400 rounded pointer-events-none leading-none`,children:`↓`}),ae&&(0,G.jsx)(`span`,{"aria-label":F(`printers.activeJobSlot.ariaLabel`,{n:ie+1}),title:F(`printers.activeJobSlot.title`,{n:ie+1}),className:`absolute top-0.5 right-0.5 px-1 py-px text-[length:var(--pc-t8,8px)] font-bold text-bambu-dark bg-bambu-green rounded pointer-events-none leading-none`,children:ae}),(0,G.jsx)(JW,{trayColor:r?.tray_color,trayType:r?.tray_type,isEmpty:g,emptyKind:v,slotNumber:1}),(0,G.jsx)(`div`,{className:`text-[length:var(--pc-t9,9px)] text-white font-bold truncate`,children:r?.tray_type||F(v===`reset`?`ams.slotUnconfigured`:`ams.slotEmpty`)}),(0,G.jsx)(QW,{k:ne?r?.k:null,reserve:Dn}),(0,G.jsx)(`div`,{className:`mt-1 h-1.5 bg-black/30 rounded-full overflow-hidden`,children:ee!==null&&ee>=0&&!g&&(0,G.jsx)(`div`,{className:`h-full rounded-full transition-all`,style:{width:`${ee}%`,backgroundColor:Ap(ee)}})})]}),se=y(11);return(0,G.jsxs)(`div`,{style:{flex:`1 1 ${se}`,minWidth:se,maxWidth:`calc(4 * ${b} + 3 * 0.25rem + 1rem)`},className:`min-w-0 p-2 bg-bambu-dark rounded-[10px] space-y-1`,children:[(0,G.jsxs)(`div`,{className:`flex w-full min-h-7 items-center gap-1.5 rounded-lg bg-bambu-dark-secondary px-2 py-1`,children:[(0,G.jsxs)(`div`,{className:`flex min-w-0 flex-1 items-center gap-1.5`,children:[(0,G.jsx)(gG,{ams:t,printerId:e.id,label:gp(t.id,t.tray.length),amsLabels:pn,canEdit:z(`printers:update`),onSaved:mn,children:(0,G.jsx)(`span`,{className:`block truncate text-[length:var(--pc-t10,10px)] text-white font-medium cursor-default select-none`,children:pn?.[t.id]||gp(t.id,t.tray.length)})}),n?.kind===`inlet`?(0,G.jsx)(eG,{inlet:n.inlet,title:F(`printers.amsSwitchInletTooltip`,{inlet:n.inlet,side:pp[n.inlet]})}):_&&n?.kind===`nozzle`?(0,G.jsx)($W,{side:n.side}):null]}),(W.supports_drying||W.drying_screen_only)&&(t.module_type===`n3f`||t.module_type===`n3s`)&&z(`printers:control`)&&(0,G.jsx)(`div`,{className:`relative ml-auto`,children:(0,G.jsx)(`button`,{disabled:W.drying_screen_only,onClick:e=>{t.dry_time>0?sr.mutate(t.id):Ze===t.id?Qe(null):yt(t,e.currentTarget)},className:`flex items-center gap-0.5 px-1 py-0.5 rounded text-[length:var(--pc-t9,9px)] transition-colors ${t.dry_time>0?`bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400`:W.drying_screen_only?`bg-bambu-dark text-bambu-gray/50 cursor-not-allowed`:`bg-bambu-dark text-bambu-gray hover:text-white hover:bg-bambu-dark/80`}`,title:W.drying_screen_only?F(`printers.drying.screenOnly`):t.dry_time>0?F(`printers.drying.stop`):F(`printers.drying.start`),children:(0,G.jsx)(mc,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`})})})]}),t.dry_time>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 overflow-hidden whitespace-nowrap rounded-lg bg-amber-50 dark:bg-amber-500/10 px-2 py-1 text-[length:var(--pc-t9,9px)]`,children:[(0,G.jsx)(mc,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] text-amber-600 dark:text-amber-400 shrink-0`}),t.dry_filament&&(0,G.jsx)(`span`,{className:`text-amber-700/80 dark:text-amber-300/70 text-[length:var(--pc-t8,8px)] truncate`,children:t.dry_target_temp==null?t.dry_filament:F(`printers.drying.targetSummary`,{filament:t.dry_filament,temp:t.dry_target_temp})}),(0,G.jsx)(`span`,{className:`text-amber-700/80 dark:text-amber-300/70 text-[length:var(--pc-t8,8px)] truncate`,children:t.dry_time>=60?`${Math.floor(t.dry_time/60)}h ${t.dry_time%60}m`:`${t.dry_time}m`}),!W.drying_screen_only&&(0,G.jsx)(`button`,{onClick:()=>sr.mutate(t.id),disabled:sr.isPending,className:`ml-auto text-amber-700 dark:text-amber-400 hover:text-amber-900 dark:hover:text-amber-300 transition-colors disabled:opacity-50 shrink-0`,title:F(`printers.drying.stop`),children:(0,G.jsx)(td,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`})})]}),(0,G.jsxs)(`div`,{className:`flex gap-1.5 max-[550px]:flex-col max-[550px]:items-start`,children:[(0,G.jsxs)(`div`,{className:`relative group flex-1`,style:S,children:[re&&(0,G.jsx)(`div`,{className:`absolute inset-0 bg-bambu-dark-tertiary/80 rounded flex items-center justify-center z-20`,children:(0,G.jsx)(Vl,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] text-bambu-green animate-spin`})}),ne?(0,G.jsx)(wU,{data:ne,actions:xi({amsId:t.id,slotId:A,loadTrayId:t.id*4+A,isRefreshing:re}),spoolman:{enabled:o,linkedSpoolId:R?.spoolman_spool_id??(j?s?.[j]?.id:void 0),spoolmanUrl:c,syncMode:l,onLinkSpool:o&&!R&&!P?()=>{let n=(ne.trayUuid||ne.tagUid||Pp(e.serial_number,t.id,A)).toUpperCase();Lt({tagUid:ne.tagUid||n,trayUuid:ne.trayUuid||``,printerId:e.id,amsId:t.id,trayId:A})}:void 0,onUnlinkSpool:M?.id?()=>rr.mutate(M.id):void 0},inventory:(()=>{if(o){if(m)return;let n=R,i=B;return{assignedSpool:i?{id:i.id,material:i.material,subtype:i.subtype,brand:i.brand??null,color_name:i.color_name??null,color_name_is_synthesized:i.color_name_is_synthesized,rgba:i.rgba??null,extra_colors:i.extra_colors??null,effect_type:i.effect_type??null,remainingWeightGrams:i.label_weight?Math.max(0,Math.round(i.label_weight-i.weight_used)):void 0}:null,onAssignSpool:()=>zt({printerId:e.id,amsId:t.id,trayId:A,trayInfo:{type:r?.tray_type||ne.profile,material:r?.tray_type??void 0,profile:ne.profile,color:ne.colorHex||``,location:gp(t.id,t.tray.length)}}),onUnassignSpool:i&&!Vp(r)?()=>h?.(i.id):void 0,isAssigned:!!n||Vp(r)}}let n=u?.(e.id,t.id,A);return{assignedSpool:n?.spool?{id:n.spool.id,material:n.spool.material,subtype:n.spool.subtype,brand:n.spool.brand,color_name:n.spool.color_name,rgba:n.spool.rgba??null,extra_colors:n.spool.extra_colors??null,effect_type:n.spool.effect_type??null,remainingWeightGrams:Math.max(0,Math.round(n.spool.label_weight-n.spool.weight_used))}:null,onAssignSpool:()=>zt({printerId:e.id,amsId:t.id,trayId:A,trayInfo:{type:r?.tray_type||ne.profile,material:r?.tray_type??void 0,profile:ne.profile,color:ne.colorHex||``,location:gp(t.id,t.tray.length)}}),onUnassignSpool:n&&!Vp(r)?()=>d?.(e.id,t.id,A):void 0,isAssigned:!!n||Vp(r)}})(),configureSlot:{enabled:z(`printers:control`),onConfigure:()=>Vt({amsId:t.id,trayId:A,trayCount:t.tray.length,trayType:r?.tray_type||void 0,trayColor:r?.tray_color||void 0,traySubBrands:r?.tray_sub_brands||void 0,trayInfoIdx:r?.tray_info_idx||void 0,extruderId:hp(t.id,r?.id??0,xn,wn),caliIdx:r?.cali_idx,savedPresetId:O?.preset_id})},children:oe}):(0,G.jsx)(TU,{kind:v??void 0,actions:xi({amsId:t.id,slotId:A,loadTrayId:t.id*4+A,isRefreshing:re}),configureSlot:{enabled:z(`printers:control`),onConfigure:()=>Vt({amsId:t.id,trayId:A,trayCount:t.tray.length,extruderId:hp(t.id,r?.id??0,xn,wn)})},onAssignSpool:()=>zt({printerId:e.id,amsId:t.id,trayId:A,trayInfo:{type:``,material:void 0,profile:``,color:``,location:gp(t.id,t.tray.length)}}),children:oe})]}),(t.humidity!=null||t.temp!=null)&&(0,G.jsxs)(`div`,{className:`flex flex-col justify-center gap-1 shrink-0 max-[550px]:w-full`,children:[t.temp!=null&&(0,G.jsx)(sG,{temp:t.temp,goodThreshold:a?.tempGood,fairThreshold:a?.tempFair,onClick:()=>Nt({amsId:t.id,amsLabel:gp(t.id,t.tray.length),mode:`temperature`}),compact:!0}),t.humidity!=null&&(0,G.jsx)(oG,{humidity:t.humidity,goodThreshold:a?.humidityGood,fairThreshold:a?.humidityFair,onClick:()=>Nt({amsId:t.id,amsLabel:gp(t.id,t.tray.length),mode:`humidity`}),compact:!0})]})]})]},t.id)}),W.vt_tray.length>0&&g&&(0,G.jsxs)(`div`,{style:T(W.vt_tray.length),className:`min-w-0 p-2 bg-bambu-dark rounded-[10px] space-y-1`,children:[(0,G.jsx)(`div`,{className:`flex w-full min-h-7 items-center gap-1.5 rounded-lg bg-bambu-dark-secondary px-2 py-1`,children:(0,G.jsx)(`span`,{className:`block min-w-0 flex-1 truncate text-[length:var(--pc-t10,10px)] text-white font-medium`,children:F(`printers.external`)})}),(0,G.jsx)(`div`,{className:`grid w-full gap-1`,style:C(W.vt_tray.length>1?2:1),children:[...W.vt_tray].sort((e,t)=>(e.id??254)-(t.id??254)).map(t=>{let n=t.id??254,r=_&&An===254?n===254&&W.active_extruder===1||n===255&&W.active_extruder===0:An===n,i=n-254,a=_?F(n===254?`printers.extL`:`printers.extR`):``,g=t.tray_info_idx?cn?.[t.tray_info_idx]:null,v=ln?.[1020+i],y=Hp(v?.preset_id,t.tray_info_idx)?v?.preset_name:void 0,b=(t.tray_uuid||t.tag_uid||Pp(e.serial_number,255,i))?.toUpperCase(),S=b?s?.[b]:void 0,C=jp(S),w=u?.(e.id,255,i),T=(()=>{let e=w?.spool;return e&&e.label_weight>0&&e.weight_used!=null?Math.round(Math.max(0,e.label_weight-e.weight_used)/e.label_weight*100):null})(),E=t.tray_type&&t.remain>=0,D=T===0&&E&&t.remain>0?null:T,O=o&&!m?p?.find(t=>t.printer_id===e.id&&t.ams_id===255&&t.tray_id===i):void 0,k=O?f?.find(e=>e.id===O.spoolman_spool_id):void 0,A=k&&(k.label_weight??0)>0?Math.round(Math.max(0,(k.label_weight??0)-k.weight_used)/(k.label_weight??1)*100):null,j=C??A??D??(E?t.remain:null),M=C!==null||A!==null?`spoolman`:D===null?E?`ams`:void 0:`inventory`,N={vendor:Vp(t)?`Bambu Lab`:`Generic`,profile:y||(k?[k.brand,k.slicer_filament_name?.split(`@`)[0].trim()||k.material].filter(Boolean).join(` `).trim():null)||w?.spool?.slicer_filament_name||g?.name||t.tray_sub_brands||t.tray_type||`Unknown`,colorName:Tf(t.tray_color||``,t.tray_sub_brands),colorHex:t.tray_color||null,kFactor:ZW(t.k),fillLevel:j,trayUuid:t.tray_uuid||null,tagUid:t.tag_uid||null,fillSource:M},P=!t.tray_type,I=cG(t),L=(0,G.jsxs)(`div`,{className:`w-full bg-bambu-dark-secondary rounded-lg p-1 text-center ${P?`opacity-50`:``} ${r?`ring-2 ring-bambu-green ring-offset-1 ring-offset-bambu-dark`:``}`,children:[(0,G.jsx)(JW,{trayColor:t.tray_color,trayType:t.tray_type,isEmpty:P,emptyKind:I,slotNumber:_?n===254?`L`:`R`:i+1}),(0,G.jsx)(`div`,{className:`text-[length:var(--pc-t9,9px)] font-bold truncate ${P?`text-white/40`:`text-white`}`,children:t.tray_type||F(`ams.slotEmpty`)}),(0,G.jsx)(QW,{k:P?null:t.k,reserve:Dn}),(0,G.jsx)(`div`,{className:`mt-1 h-1.5 bg-black/30 rounded-full overflow-hidden`,children:j!==null&&j>=0&&!P&&(0,G.jsx)(`div`,{className:`h-full rounded-full transition-all`,style:{width:`${j}%`,backgroundColor:Ap(j)}})})]});return(0,G.jsx)(`div`,{className:`relative group w-full`,style:x,children:P?(0,G.jsx)(TU,{kind:I??void 0,actions:xi({amsId:255,slotId:i,loadTrayId:n,includeRfid:!1}),configureSlot:{enabled:z(`printers:control`),onConfigure:()=>Vt({amsId:255,trayId:i,trayCount:1,extruderId:_?+(n===254):void 0})},onAssignSpool:()=>zt({printerId:e.id,amsId:255,trayId:i,trayInfo:{type:``,material:void 0,profile:``,color:``,location:`External Slot ${i+1}`}}),children:L}):(0,G.jsx)(wU,{data:N,actions:xi({amsId:255,slotId:i,loadTrayId:n,includeRfid:!1}),spoolman:{enabled:o,linkedSpoolId:O?.spoolman_spool_id??(b?s?.[b]?.id:void 0),spoolmanUrl:c,syncMode:l,onLinkSpool:o&&!O&&!w?()=>{let t=(N.trayUuid||N.tagUid||Pp(e.serial_number,255,i)).toUpperCase();Lt({tagUid:N.tagUid||t,trayUuid:N.trayUuid||``,printerId:e.id,amsId:255,trayId:i})}:void 0,onUnlinkSpool:S?.id?()=>rr.mutate(S.id):void 0},inventory:(()=>{if(o){if(m)return;let n=O,r=k;return{assignedSpool:r?{id:r.id,material:r.material,subtype:r.subtype,brand:r.brand??null,color_name:r.color_name??null,color_name_is_synthesized:r.color_name_is_synthesized,rgba:r.rgba??null,extra_colors:r.extra_colors??null,effect_type:r.effect_type??null,remainingWeightGrams:r.label_weight?Math.max(0,Math.round(r.label_weight-r.weight_used)):void 0}:null,onAssignSpool:()=>zt({printerId:e.id,amsId:255,trayId:i,trayInfo:{type:t.tray_type||N.profile,material:t.tray_type??void 0,profile:N.profile,color:N.colorHex||``,location:a||F(`printers.external`)}}),onUnassignSpool:r&&!Vp(t)?()=>h?.(r.id):void 0,isAssigned:!!n||Vp(t)}}let n=u?.(e.id,255,i);return{assignedSpool:n?.spool?{id:n.spool.id,material:n.spool.material,subtype:n.spool.subtype,brand:n.spool.brand,color_name:n.spool.color_name,rgba:n.spool.rgba??null,extra_colors:n.spool.extra_colors??null,effect_type:n.spool.effect_type??null,remainingWeightGrams:Math.max(0,Math.round(n.spool.label_weight-n.spool.weight_used))}:null,onAssignSpool:()=>zt({printerId:e.id,amsId:255,trayId:i,trayInfo:{type:t.tray_type||N.profile,material:t.tray_type??void 0,profile:N.profile,color:N.colorHex||``,location:a||F(`printers.external`)}}),onUnassignSpool:n&&!Vp(t)?()=>d?.(e.id,255,i):void 0,isAssigned:!!n||Vp(t)}})(),configureSlot:{enabled:z(`printers:control`),onConfigure:()=>Vt({amsId:255,trayId:i,trayCount:1,trayType:t.tray_type||void 0,trayColor:t.tray_color||void 0,traySubBrands:t.tray_sub_brands||void 0,trayInfoIdx:t.tray_info_idx||void 0,extruderId:_?+(n===254):void 0,caliIdx:t.cali_idx,savedPresetId:v?.preset_id})},children:L})},n)})})]})]})]})})()]}),e.is_active!==!1&&!W?.connected&&r===`expanded`&&qn&&gr,r===`expanded`&&(0,G.jsxs)(`div`,{className:`mt-auto`,children:[Fn&&(0,G.jsxs)(`div`,{className:`pt-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-2`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] uppercase tracking-wider text-bambu-gray font-medium`,children:F(`printers.power`,`Power`)}),(0,G.jsx)(`div`,{className:`flex-1 h-[2px] bg-bambu-dark-tertiary`})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 rounded-[10px] bg-bambu-dark p-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 min-w-0 pl-1`,children:[(0,G.jsx)(rd,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] text-bambu-gray flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm text-white truncate`,children:Fn.name}),(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 rounded-full bg-bambu-dark-tertiary text-bambu-gray text-[length:var(--pc-t10,10px)] font-medium flex-shrink-0`,title:F(`smartPlugs.power`),children:Ln?.energy?.power!==null&&Ln?.energy?.power!==void 0?`${Math.round(Ln.energy.power)}W`:`--`})]}),(0,G.jsx)(`div`,{className:`flex-1`}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`button`,{onClick:()=>ur.mutate(!Fn.auto_off),disabled:ur.isPending||Fn.auto_off_executed||!z(`smart_plugs:control`),title:z(`smart_plugs:control`)?Fn.auto_off_executed?F(`printers.autoOffExecuted`):F(`printers.autoOffAfterPrint`):F(`printers.permission.noSmartPlugControl`),className:`flex h-8 w-8 flex-shrink-0 items-center justify-center rounded-lg text-xs font-bold transition-colors disabled:opacity-50 disabled:cursor-not-allowed ${z(`smart_plugs:control`)?Fn.auto_off||Fn.auto_off_executed?`bg-bambu-green/20 text-bambu-green hover:bg-bambu-green/30`:`bg-bambu-dark-tertiary text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary/80`:`bg-bambu-dark-tertiary/50 text-bambu-gray/50`}`,children:(0,G.jsx)(js,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(`button`,{onClick:()=>{Ln?.state===`ON`?fe(!0):ue(!0)},disabled:lr.isPending||!z(`smart_plugs:control`),className:`flex h-8 w-8 flex-shrink-0 items-center justify-center rounded-lg text-xs transition-colors disabled:opacity-50 disabled:cursor-not-allowed ${z(`smart_plugs:control`)?Ln?.state===`ON`?`bg-bambu-green/20 text-bambu-green hover:bg-bambu-green/30`:`bg-bambu-dark-tertiary text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary/80`:`bg-bambu-dark-tertiary/50 text-bambu-gray/50`}`,title:z(`smart_plugs:control`)?Ln?.state===`ON`?`Turn off`:`Turn on`:F(`printers.permission.noSmartPlugControl`),children:(0,G.jsx)(rd,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})})]})]}),In&&In.length>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mt-2`,children:[(0,G.jsx)(zc,{className:`w-[var(--pc-i35,0.875rem)] h-[var(--pc-i35,0.875rem)] text-blue-600 dark:text-blue-400 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`HA:`}),(0,G.jsx)(`div`,{className:`h-[2px] w-5 bg-bambu-dark-tertiary/50`}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1`,children:In.map(e=>{let t=e.ha_entity_id?.startsWith(`script.`);return(0,G.jsxs)(`button`,{onClick:()=>{t?dr.mutate({id:e.id,action:`on`}):me(e)},disabled:dr.isPending,title:`${t?`Run`:`Toggle`} ${e.ha_entity_id}`,className:`px-2 py-0.5 text-xs bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400 hover:bg-blue-500/30 rounded transition-colors flex items-center gap-1`,children:[(0,G.jsx)(Ml,{className:`w-[var(--pc-i25,0.625rem)] h-[var(--pc-i25,0.625rem)]`}),e.name]},e.id)})})]})]}),(0,G.jsx)(ece,{printerId:e.id}),(0,G.jsxs)(`div`,{className:`pt-4`,children:[(0,G.jsx)(`div`,{className:`mb-3 h-[2px] bg-bambu-dark-tertiary`}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2`,children:[Si,(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-2 flex-wrap`,children:[(0,G.jsxs)(`div`,{className:`flex items-center flex-shrink-0`,children:[(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>yi(_),disabled:!W?.connected||!z(`camera:view`),title:z(`camera:view`)?F(_===`embedded`?`printers.openCameraOverlay`:`printers.openCameraWindow`):F(`printers.permission.noCamera`),className:`${vi} !rounded-r-none`,children:(0,G.jsx)(Wu,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:e=>{let t=e.currentTarget.getBoundingClientRect();At({x:t.left,y:t.bottom+4})},disabled:!W?.connected||!z(`camera:view`),title:z(`camera:view`)?F(`settings.cameraViewMode`):F(`printers.permission.noCamera`),"aria-label":F(`settings.cameraViewMode`),className:`!h-8 !min-h-8 !w-6 !px-0 !py-0 !rounded-l-none border-l border-bambu-dark`,children:(0,G.jsx)(ps,{className:`w-3 h-3`})})]}),kt&&(0,G.jsx)(FT,{x:kt.x,y:kt.y,items:bi,onClose:()=>At(null)}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>se(!0),disabled:!z(`printers:files`),title:z(`printers:files`)?F(`printers.browseFiles`):F(`printers.permission.noFiles`),className:vi,children:(0,G.jsx)(Nc,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsxs)(Q,{size:`sm`,onClick:()=>Ue(!0),disabled:!z(`library:upload`)||!z(`queue:create`),title:z(`library:upload`)?z(`queue:create`)?F(`common.print`):F(`fileManager.noPermissionAddToQueue`):F(`fileManager.noPermissionUpload`),className:`!h-8 !min-h-8 !px-2 !py-0 !bg-bambu-green hover:!bg-bambu-green/80 !text-white`,children:[(0,G.jsx)(Ll,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`}),F(`common.print`)]})]})]})]})]}),(0,G.jsx)(_ke,{printerId:e.id,dryingActive:En.some(e=>(e.dry_time??0)>0),timeFormat:g})]}),oe&&(0,G.jsx)(Fse,{printerId:e.id,printerName:e.name,onClose:()=>se(!1)}),He&&(0,G.jsx)(yW,{folderId:null,onClose:()=>Ue(!1),onUploadComplete:()=>{},autoUpload:!0,accept:`.gcode,.3mf`,validateFile:e=>{let t=e.name.toLowerCase();if(!t.endsWith(`.gcode`)&&!t.includes(`.gcode.`))return F(`printers.dropNotPrintable`,`Only .gcode and .gcode.3mf files can be printed`)},onFileUploaded:t=>{let n=t.metadata?.sliced_for_model,r=hG(e.model);if(n&&r&&n.toLowerCase()!==r.toLowerCase())return Z.deleteLibraryFile(t.id).catch(()=>{}),F(`printers.incompatibleFile`,`This file was sliced for {{slicedFor}}, but this printer is a {{printerModel}}`,{slicedFor:n,printerModel:r});Xe({id:t.id,filename:t.filename})}}),Ye&&(0,G.jsx)(WW,{mode:`create`,libraryFileId:Ye.id,archiveName:Ye.filename,initialSelectedPrinterIds:[e.id],onClose:()=>Xe(null),onSuccess:()=>Xe(null),cleanupLibraryAfterDispatch:!0}),H&&(0,G.jsx)(Xse,{printerId:e.id,printerName:e.name,onClose:()=>ce(!1)}),Ke&&(0,G.jsx)(Wp,{printerId:e.id,printerName:e.name,onClose:()=>qe(!1)}),We&&(0,G.jsx)(VOe,{printer:e,status:W,totalPrintHours:n?.total_print_hours,onClose:Je}),Wt&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,onClick:()=>ti(),children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-2xl max-w-lg w-full`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[Wt.needs_calibration?(0,G.jsx)(Yl,{className:`w-[var(--pc-i5,1.25rem)] h-[var(--pc-i5,1.25rem)] text-blue-500`}):Wt.is_empty?(0,G.jsx)(xs,{className:`w-[var(--pc-i5,1.25rem)] h-[var(--pc-i5,1.25rem)] text-green-500`}):(0,G.jsx)(Ds,{className:`w-[var(--pc-i5,1.25rem)] h-[var(--pc-i5,1.25rem)] text-yellow-500`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:`Build Plate Check`}),Wt.reference_count!==void 0&&Wt.max_references&&(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray bg-bambu-dark-tertiary px-2 py-1 rounded`,children:[Wt.reference_count,`/`,Wt.max_references,` refs`]})]}),(0,G.jsx)(`button`,{onClick:()=>ti(),className:`p-1 text-bambu-gray hover:text-white rounded transition-colors`,children:(0,G.jsx)(td,{className:`w-[var(--pc-i5,1.25rem)] h-[var(--pc-i5,1.25rem)]`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-4`,children:[Wt.needs_calibration?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`p-3 rounded-lg bg-blue-100 dark:bg-blue-500/20 border border-blue-300 dark:border-blue-500/50`,children:[(0,G.jsx)(`p`,{className:`font-medium text-blue-700 dark:text-blue-400`,children:F(`printers.plateDetection.calibrationRequired`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,dangerouslySetInnerHTML:{__html:F(`printers.plateDetection.calibrationInstructions`)}})]}),(0,G.jsxs)(`div`,{className:`text-sm text-bambu-gray space-y-2`,children:[(0,G.jsx)(`p`,{children:F(`printers.plateDetection.calibrationDescription`)}),(0,G.jsx)(`p`,{dangerouslySetInnerHTML:{__html:F(`printers.plateDetection.calibrationTip`)}})]})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`p-3 rounded-lg ${Wt.is_empty?`bg-green-100 dark:bg-green-500/20 border border-green-300 dark:border-green-500/50`:`bg-yellow-100 dark:bg-yellow-500/20 border border-yellow-300 dark:border-yellow-500/50`}`,children:[(0,G.jsx)(`p`,{className:`font-medium ${Wt.is_empty?`text-green-700 dark:text-green-400`:`text-yellow-700 dark:text-yellow-400`}`,children:Wt.is_empty?F(`printers.plateDetection.plateEmpty`):F(`printers.plateDetection.objectsDetected`)}),(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:[F(`printers.plateDetection.confidence`),`: `,Math.round(Wt.confidence*100),`% | `,F(`printers.plateDetection.difference`),`: `,Wt.difference_percent.toFixed(1),`%`]})]}),Wt.debug_image_url&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-2`,children:F(`printers.plateDetection.analysisPreview`)}),(0,G.jsx)(`img`,{src:Wt.debug_image_url,alt:F(`printers.plateDetection.analysisPreview`),className:`w-full rounded-lg border border-bambu-dark-tertiary`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-2`,children:F(`printers.plateDetection.analysisLegend`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:Wt.message})]}),Jr&&Jr.references.length>0&&(0,G.jsxs)(`div`,{className:`mt-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-2`,children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white shrink-0`,children:F(`printers.plateDetection.savedReferences`,{count:Jr.references.length,max:Jr.max_references})}),(0,G.jsx)(`div`,{className:`flex-1 h-[2px] bg-bambu-dark-tertiary`})]}),(0,G.jsx)(`div`,{className:`grid grid-cols-5 gap-2`,children:Jr.references.map(t=>(0,G.jsxs)(`div`,{className:`relative group`,children:[(0,G.jsx)(`img`,{src:Z.getPlateReferenceThumbnailUrl(e.id,t.index),alt:t.label||`Reference ${t.index+1}`,className:`w-full aspect-video object-cover rounded border border-bambu-dark-tertiary`}),(0,G.jsx)(`button`,{onClick:()=>ii(t.index),className:`absolute top-1 right-1 p-0.5 bg-red-500/80 rounded can-hover:opacity-0 group-hover:opacity-100 focus-visible:opacity-100 transition-opacity`,title:F(`printers.plateDetection.deleteReference`),children:(0,G.jsx)(td,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] text-white`})}),Xr?.index===t.index?(0,G.jsx)(`input`,{type:`text`,value:Xr.label,onChange:e=>Zr({...Xr,label:e.target.value}),onBlur:()=>ri(t.index,Xr.label),onKeyDown:e=>{e.key===`Enter`&&ri(t.index,Xr.label),e.key===`Escape`&&Zr(null)},className:`w-full mt-1 px-1 py-0.5 text-xs bg-bambu-dark-tertiary border border-bambu-green rounded text-white`,autoFocus:!0,placeholder:F(`printers.plateDetection.labelPlaceholder`)}):(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1 truncate cursor-pointer hover:text-white`,onClick:()=>Zr({index:t.index,label:t.label}),title:t.label?F(`printers.plateDetection.clickToEdit`,{label:t.label}):F(`printers.plateDetection.clickToAddLabel`),children:t.label||(0,G.jsx)(`span`,{className:`italic opacity-50`,children:F(`printers.noLabel`)})}),(0,G.jsx)(`p`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray/60`,children:t.timestamp?ep(t.timestamp)?.toLocaleDateString()??``:``})]},t.index))})]}),!Wt.needs_calibration&&(0,G.jsxs)(`div`,{className:`mt-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsxs)(`div`,{className:`flex min-w-0 flex-1 items-center gap-2`,children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white shrink-0`,children:F(`printers.roi.title`)}),(0,G.jsx)(`div`,{className:`flex-1 h-[2px] bg-bambu-dark-tertiary`})]}),Xt?(0,G.jsxs)(`div`,{className:`flex gap-1`,children:[(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>Zt(null),disabled:Qt,children:F(`common.cancel`)}),(0,G.jsx)(Q,{size:`sm`,onClick:ai,disabled:Qt,children:Qt?(0,G.jsx)(Y,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] animate-spin`}):F(`common.save`)})]}):(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:()=>Zt(Wt.roi||{x:.15,y:.35,w:.7,h:.55}),children:[(0,G.jsx)(kl,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] mr-1`}),F(`common.edit`)]})]}),Xt?(0,G.jsxs)(`div`,{className:`space-y-3 bg-bambu-dark-tertiary/50 p-3 rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray`,children:F(`printers.roi.xStart`)}),(0,G.jsx)(`input`,{type:`range`,min:`0`,max:`0.9`,step:`0.01`,value:Xt.x,onChange:e=>Zt({...Xt,x:parseFloat(e.target.value)}),className:`w-full h-1.5 bg-bambu-dark-tertiary rounded-lg cursor-pointer accent-green-500`}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[Math.round(Xt.x*100),`%`]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray`,children:F(`printers.roi.yStart`)}),(0,G.jsx)(`input`,{type:`range`,min:`0`,max:`0.9`,step:`0.01`,value:Xt.y,onChange:e=>Zt({...Xt,y:parseFloat(e.target.value)}),className:`w-full h-1.5 bg-bambu-dark-tertiary rounded-lg cursor-pointer accent-green-500`}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[Math.round(Xt.y*100),`%`]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray`,children:F(`printers.width`)}),(0,G.jsx)(`input`,{type:`range`,min:`0.1`,max:`1`,step:`0.01`,value:Xt.w,onChange:e=>Zt({...Xt,w:parseFloat(e.target.value)}),className:`w-full h-1.5 bg-bambu-dark-tertiary rounded-lg cursor-pointer accent-green-500`}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[Math.round(Xt.w*100),`%`]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray`,children:F(`printers.height`)}),(0,G.jsx)(`input`,{type:`range`,min:`0.1`,max:`1`,step:`0.01`,value:Xt.h,onChange:e=>Zt({...Xt,h:parseFloat(e.target.value)}),className:`w-full h-1.5 bg-bambu-dark-tertiary rounded-lg cursor-pointer accent-green-500`}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[Math.round(Xt.h*100),`%`]})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:F(`printers.roi.instruction`)})]}):(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[`Current: X=`,Math.round((Wt.roi?.x||.15)*100),`%, Y=`,Math.round((Wt.roi?.y||.35)*100),`%, W=`,Math.round((Wt.roi?.w||.7)*100),`%, H=`,Math.round((Wt.roi?.h||.55)*100),`%`]})]})]}),(0,G.jsx)(`div`,{className:`flex justify-end gap-2 p-4`,children:Wt.needs_calibration?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Q,{variant:`ghost`,onClick:()=>ti(),children:F(`common.cancel`)}),(0,G.jsx)(Q,{onClick:()=>ni(),disabled:Jt,children:Jt?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] mr-2 animate-spin`}),`Calibrating...`]}):`Calibrate Empty Plate`})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Q,{variant:`ghost`,onClick:()=>ni(),disabled:Jt,children:Jt?`Adding...`:`Add Reference (${Jr?.references.length||0}/${Jr?.max_references||5})`}),(0,G.jsx)(Q,{onClick:()=>ti(),children:`Close`})]})})]})}),le&&Fn&&(0,G.jsx)(rf,{title:F(`printers.confirm.powerOnTitle`),message:F(`printers.confirm.powerOnMessage`,{name:e.name}),confirmText:F(`printers.confirm.powerOnButton`),variant:`default`,onConfirm:()=>{lr.mutate(`on`),ue(!1)},onCancel:()=>ue(!1)}),jr&&(0,G.jsx)(rf,{title:F(`printers.maintenance.confirmMidPrintTitle`),message:F(`printers.maintenance.confirmMidPrintMessage`,{name:e.name}),confirmText:F(`printers.maintenance.menuEnter`),variant:`danger`,onConfirm:()=>{Ar.mutate(!1),Mr(!1)},onCancel:()=>Mr(!1)}),de&&Fn&&(0,G.jsx)(rf,{title:F(`printers.confirm.powerOffTitle`),message:W?.state===`RUNNING`?F(`printers.confirm.powerOffWarning`,{name:e.name}):F(`printers.confirm.powerOffMessage`,{name:e.name}),confirmText:F(`printers.confirm.powerOffButton`),variant:`danger`,onConfirm:()=>{lr.mutate(`off`),fe(!1)},onCancel:()=>fe(!1)}),pe&&(0,G.jsx)(rf,{title:F(`printers.confirm.haToggleTitle`,{name:pe.name}),message:W?.state===`RUNNING`?F(`printers.confirm.haToggleWarning`,{name:e.name,entity:pe.ha_entity_id||pe.name}):F(`printers.confirm.haToggleMessage`,{entity:pe.ha_entity_id||pe.name}),confirmText:F(`printers.confirm.haToggleButton`),variant:W?.state===`RUNNING`?`danger`:`default`,onConfirm:()=>{dr.mutate({id:pe.id,action:`toggle`}),me(null)},onCancel:()=>me(null)}),we&&(0,G.jsx)(rf,{title:F(`printers.confirm.stopTitle`),message:F(`printers.confirm.stopMessage`,{name:e.name}),confirmText:F(`printers.confirm.stopButton`),variant:`danger`,onConfirm:()=>{fr.mutate(),Te(!1)},onCancel:()=>Te(!1)}),Ee&&(0,G.jsx)(rf,{title:F(`printers.confirm.pauseTitle`),message:F(`printers.confirm.pauseMessage`,{name:e.name}),confirmText:F(`printers.confirm.pauseButton`),variant:`default`,onConfirm:()=>{pr.mutate(),De(!1)},onCancel:()=>De(!1)}),Re&&(0,G.jsx)(rf,{title:F(`printers.confirm.resumeTitle`),message:F(`printers.confirm.resumeMessage`,{name:e.name}),confirmText:F(`printers.confirm.resumeButton`),variant:`default`,onConfirm:()=>{mr.mutate(),ze(!1)},onCancel:()=>ze(!1)}),(0,G.jsx)(ET,{printerId:e.id,isOpen:Be,onClose:()=>Ve(!1)}),he&&(0,G.jsx)(Uee,{printerName:e.name,errors:W?.hms_errors||[],onClose:()=>ge(!1),printerId:e.id,hasPermission:z,runoutGuidance:Pn}),_e&&(0,G.jsx)(Qse,{printerName:e.name,detection:N,lastError:P,onClose:()=>ve(!1)}),ye&&W&&(0,G.jsx)(WDe,{isOpen:ye,state:W.ams_filament_backup,amsUnits:W.ams,amsExtruderMap:W.ams_extruder_map,isDualNozzle:e.nozzle_count===2||W?.temperatures?.nozzle_2!==void 0,canToggle:z(`printers:control`),pending:cr.isPending,onToggle:e=>cr.mutate(e),onClose:()=>be(!1)}),Mt&&(0,G.jsx)(BDe,{isOpen:!!Mt,onClose:()=>Nt(null),printerId:e.id,printerName:e.name,amsId:Mt.amsId,amsLabel:Mt.amsLabel,initialMode:Mt.mode,thresholds:a}),Pt&&(0,G.jsx)(KDe,{isOpen:!!Pt,onClose:()=>Ft(null),printerId:e.id,printerName:e.name,initialKind:Pt.initialKind,availableKinds:Pt.availableKinds}),It&&(0,G.jsx)(EU,{isOpen:!!It,onClose:()=>Lt(null),tagUid:It.tagUid,trayUuid:It.trayUuid,printerId:It.printerId,amsId:It.amsId,trayId:It.trayId}),Rt&&(0,G.jsx)(OU,{isOpen:!!Rt,onClose:()=>zt(null),printerId:Rt.printerId,amsId:Rt.amsId,trayId:Rt.trayId,trayInfo:Rt.trayInfo,spoolmanEnabled:!!o}),Bt&&(0,G.jsx)(_W,{isOpen:!!Bt,onClose:()=>Vt(null),printerId:e.id,slotInfo:Bt,printerModel:hG(e.model)||void 0,nozzleDiameter:aee(W,Bt.amsId),onSuccess:()=>{I.invalidateQueries({queryKey:[`slotPresets`,e.id]}),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})}}),Wr&&(0,G.jsx)(HOe,{slotLabel:Wr.slotLabel,amsId:Wr.amsId,slotId:Wr.slotId,extruderSlots:W?.extruder_slots??{},isLoading:Hr.isPending,onConfirm:e=>Hr.mutate({trayId:Wr.trayId,extruderId:e}),onCancel:()=>Gr(null)}),ie&&(0,G.jsx)(bke,{printer:e,onClose:()=>ae(!1)}),Ht&&nn&&(0,G.jsx)(yke,{printer:e,firmwareInfo:nn,onClose:()=>Ut(!1)}),Ze!==null&&ht&&(()=>{let e=$e===`n3s`?85:65,t=e+10;return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-[100]`,"data-testid":`drying-popover-backdrop`,onMouseDown:()=>{xt.current=bt.current!==null&&document.activeElement===bt.current},onClick:()=>{if(xt.current){xt.current=!1;return}Qe(null)}}),(0,G.jsxs)(`div`,{className:`fixed z-[101] flex flex-col w-[240px] bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-2xl overflow-hidden`,style:{left:ht.left,...ht.placement===`above`?{bottom:`calc(100dvh - ${ht.anchorY}px)`,maxHeight:`${ht.anchorY-8}px`}:{top:ht.top,maxHeight:`calc(100dvh - ${ht.top}px - 8px)`}},onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`shrink-0 flex items-center justify-center gap-2 px-3 py-2.5`,children:[(0,G.jsx)(mc,{className:`w-[var(--pc-i35,0.875rem)] h-[var(--pc-i35,0.875rem)] text-bambu-green`}),(0,G.jsx)(`span`,{className:`text-sm text-white font-medium text-center`,children:F(`printers.drying.start`)})]}),(0,G.jsx)(`div`,{className:`shrink-0 h-px bg-bambu-dark-tertiary`}),(0,G.jsxs)(`div`,{className:`px-3 py-2.5 space-y-2.5 overflow-y-auto min-h-0`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-[length:var(--pc-t10,10px)] text-white/70 font-medium mb-1 block`,children:F(`printers.filaments`)}),(0,G.jsx)(lG,{value:tt,options:Object.keys(S).map(e=>({value:e,label:e})),onChange:e=>{nt(e);let t=S[e];t&&(it(t[$e===`n3s`?`n3s`:`n3f`]),ot($e===`n3s`?t.n3s_hours:t.n3f_hours))},fullWidth:!0})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-1`,children:[(0,G.jsx)(`label`,{className:`text-[length:var(--pc-t10,10px)] text-white/70 font-medium`,children:F(`printers.drying.temperature`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`input`,{type:`number`,min:45,max:e,value:rt,onChange:t=>it(Math.min(e,Math.max(45,Number(t.target.value)||45))),className:`w-12 px-1 py-0.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-[length:var(--pc-t11,11px)] text-center focus:outline-none focus:border-bambu-green [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none`}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray`,children:`°C`})]})]}),(0,G.jsx)(`input`,{type:`range`,min:35,max:t,value:rt,onChange:t=>it(Math.min(e,Math.max(45,Number(t.target.value)))),className:`w-full h-1 accent-bambu-green cursor-pointer`}),(0,G.jsxs)(`div`,{className:`flex justify-between text-[length:var(--pc-t9,9px)] text-bambu-gray/50 mt-0.5`,children:[(0,G.jsx)(`span`,{children:`45°C`}),(0,G.jsxs)(`span`,{children:[e,`°C`]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-1`,children:[(0,G.jsx)(`label`,{className:`text-[length:var(--pc-t10,10px)] text-white/70 font-medium`,children:F(`printers.drying.duration`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`input`,{type:`number`,min:1,max:24,value:at,onChange:e=>ot(Math.min(24,Math.max(1,Number(e.target.value)||1))),className:`w-10 px-1 py-0.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-[length:var(--pc-t11,11px)] text-center focus:outline-none focus:border-bambu-green [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none`}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray`,children:F(`printers.drying.hours`)})]})]}),(0,G.jsx)(`input`,{type:`range`,min:1,max:24,value:at,onChange:e=>ot(Number(e.target.value)),className:`w-full h-1 accent-bambu-green cursor-pointer`}),(0,G.jsxs)(`div`,{className:`flex justify-between text-[length:var(--pc-t9,9px)] text-bambu-gray/50 mt-0.5`,children:[(0,G.jsx)(`span`,{children:`1h`}),(0,G.jsx)(`span`,{children:`24h`})]})]}),(()=>{let e=((Ze===null?void 0:En.find(e=>e.id===Ze))?.tray??[]).some(e=>e.state===11),t=st&&!e;return(0,G.jsx)(`button`,{type:`button`,onClick:()=>ct(e=>!e),"aria-pressed":t,disabled:e,title:e?F(`printers.drying.rotateUnavailableReason`):void 0,className:`h-8 w-full rounded-lg border px-2 text-sm font-medium transition-colors disabled:cursor-not-allowed disabled:opacity-50 ${t?`bg-bambu-green border-bambu-green text-white`:`bg-bambu-dark border-bambu-dark-tertiary text-white hover:bg-bambu-dark-tertiary disabled:hover:bg-bambu-dark`}`,children:F(`printers.drying.rotateTray`)})})(),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-[10px] text-white/70 font-medium mb-1 block`,children:F(`printers.drying.startMode`)}),(0,G.jsx)(`div`,{className:`grid grid-cols-3 gap-1`,children:[`now`,`delay`,`at_time`].map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>ut(e),className:`py-1 rounded-lg border text-[10px] font-medium transition-colors ${lt===e?`bg-bambu-green border-bambu-green text-white`:`bg-bambu-dark border-bambu-dark-tertiary text-white hover:bg-bambu-dark-tertiary`}`,children:F(e===`now`?`printers.drying.modeNow`:e===`delay`?`printers.drying.modeDelay`:`printers.drying.modeAtTime`)},e))}),lt===`delay`&&(0,G.jsx)(`div`,{className:`mt-1.5 grid grid-cols-4 gap-1`,children:KOe.map(e=>(0,G.jsx)(`button`,{type:`button`,"aria-pressed":dt===e,onClick:()=>ft(e),className:`py-1 rounded-lg border text-[10px] font-medium transition-colors ${dt===e?`bg-bambu-green border-bambu-green text-white`:`bg-bambu-dark border-bambu-dark-tertiary text-white hover:bg-bambu-dark-tertiary`}`,children:lp(e/60)},e))}),lt===`at_time`&&(0,G.jsx)(`input`,{ref:bt,type:`datetime-local`,"data-testid":`drying-start-at`,value:pt,onChange:e=>mt(e.target.value),className:`mt-1.5 w-full px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-[11px] focus:outline-none focus:border-bambu-green [color-scheme:dark]`})]})]}),(0,G.jsx)(`div`,{className:`shrink-0 h-px bg-bambu-dark-tertiary`}),(0,G.jsx)(`div`,{className:`shrink-0 px-3 pt-2.5 pb-3`,children:(0,G.jsx)(`button`,{onClick:()=>{if(Ze!==null){let e=(En.find(e=>e.id===Ze)?.tray??[]).some(e=>e.state===11),t=st&&!e;if(lt===`now`)ir.mutate({amsId:Ze,temp:rt,duration:at,filament:tt,rotateTray:t});else{let e=Nee(lt,dt,pt);e&&ar.mutate({amsId:Ze,temp:rt,duration:at,filament:tt,rotateTray:t,startAfter:e})}}},disabled:ir.isPending||ar.isPending||lt===`at_time`&&!pt,"data-testid":`drying-start-confirm`,className:`w-full py-1.5 bg-bambu-green hover:bg-bambu-green/80 text-white text-xs font-medium rounded-lg transition-colors disabled:opacity-50`,children:lt===`now`?ir.isPending?F(`printers.drying.startingDrying`):F(`printers.drying.start`):F(`printers.drying.schedule`)})})]}),(0,G.jsx)(`div`,{className:`fixed z-[102] w-2.5 h-2.5 rotate-45 bg-bambu-dark-secondary border-bambu-dark-tertiary pointer-events-none`,style:{left:ht.left+ht.arrowLeft-5,top:ht.anchorY-5,...ht.placement===`above`?{borderRightWidth:1,borderBottomWidth:1}:{borderLeftWidth:1,borderTopWidth:1}}})]})})()]})}function vke({onClose:e,onAdd:t,existingSerials:n}){let{t:r}=U(),[i,a]=(0,y.useState)({name:``,serial_number:``,ip_address:``,access_code:``,model:``,location:``,auto_archive:!0}),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)([]),[u,d]=(0,y.useState)(``),[f,p]=(0,y.useState)(!1),[m,h]=(0,y.useState)(!1),[g,_]=(0,y.useState)([]),[v,b]=(0,y.useState)(``),[x,S]=(0,y.useState)(``),[C,w]=(0,y.useState)(!1),[T,E]=(0,y.useState)({scanned:0,total:0}),[D,O]=(0,y.useState)(!1),[k,A]=(0,y.useState)(!1),[j,M]=(0,y.useState)(null);(0,y.useEffect)(()=>{xd.getInfo().then(e=>{h(e.is_docker),e.subnets.length>0&&(_(e.subnets),b(e.subnets[0]))}).catch(()=>{});try{let e=localStorage.getItem(`bambuddy.discovery.customSubnet`);e&&S(e)}catch{}},[]);let N=c.filter(e=>!n.includes(e.serial)),P=async e=>{e.preventDefault(),A(!0);try{let e=await Z.diagnoseConnection({ip_address:i.ip_address.trim(),serial_number:i.serial_number.trim()||void 0,access_code:i.access_code||void 0});if(e.checks.some(e=>e.status===`fail`)){M(e);return}}catch{}finally{A(!1)}t(i)},F=async()=>{d(``),l([]),s(!0),p(!1),E({scanned:0,total:0});let e=C?x.trim():v,t=m||C;if(t&&C)try{localStorage.setItem(`bambuddy.discovery.customSubnet`,e)}catch{}try{if(t){await xd.startSubnetScan(e);let t=setInterval(async()=>{try{let e=await xd.getScanStatus();E({scanned:e.scanned,total:e.total}),l(await xd.getDiscoveredPrinters()),e.running||(clearInterval(t),s(!1),p(!0))}catch(e){console.error(`Failed to get scan status:`,e)}},500)}else{await xd.startDiscovery(10);let e=setInterval(async()=>{try{l(await xd.getDiscoveredPrinters())}catch(e){console.error(`Failed to get discovered printers:`,e)}},1e3);setTimeout(async()=>{clearInterval(e);try{await xd.stopDiscovery()}catch{}s(!1),p(!0);try{l(await xd.getDiscoveredPrinters())}catch(e){console.error(`Failed to get final discovered printers:`,e)}},1e4)}}catch(e){console.error(`Failed to start discovery:`,e),d(e instanceof Error?e.message:r(`printers.discovery.failedToStart`)),s(!1),p(!0)}},I=e=>{let t=e.serial.startsWith(`unknown-`)?``:e.serial;a({...i,name:e.name||``,serial_number:t,ip_address:e.ip_address,model:hG(e.model)}),l([])};return(0,y.useEffect)(()=>()=>{xd.stopDiscovery().catch(()=>{}),xd.stopSubnetScan().catch(()=>{})},[]),(0,y.useEffect)(()=>{let t=t=>{t.key===`Escape`&&e()};return window.addEventListener(`keydown`,t),()=>window.removeEventListener(`keydown`,t)},[e]),(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-start sm:items-center justify-center z-50 p-4 overflow-y-auto`,onClick:e,children:(0,G.jsx)(Ld,{className:`w-full max-w-md my-auto max-h-[calc(100vh-2rem)] overflow-y-auto`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(zd,{children:[(0,G.jsx)(`h2`,{className:`text-xl font-semibold mb-4`,children:r(`printers.addPrinter`)}),(0,G.jsxs)(`div`,{className:`mb-4 pb-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`mb-3`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`printers.discovery.subnetToScan`)}),g.length>0?(0,G.jsxs)(`select`,{className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,value:C?`__custom__`:v,onChange:e=>{e.target.value===`__custom__`?w(!0):(w(!1),b(e.target.value))},disabled:o,children:[g.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e)),(0,G.jsx)(`option`,{value:`__custom__`,children:r(`printers.discovery.customSubnetOption`)})]}):(0,G.jsx)(`input`,{type:`text`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,value:v,onChange:e=>b(e.target.value),placeholder:`192.168.1.0/24`,disabled:o}),C&&(0,G.jsx)(`input`,{type:`text`,"aria-label":r(`printers.discovery.customSubnetLabel`),className:`mt-2 w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,value:x,onChange:e=>S(e.target.value),placeholder:`10.1.1.0/24`,disabled:o}),(0,G.jsx)(`p`,{className:`mt-1 text-xs text-bambu-gray`,children:r(m?`printers.discovery.dockerNote`:`printers.discovery.customSubnetNote`)})]}),(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:F,disabled:o,className:`w-full`,children:o?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),(m||C)&&T.total>0?r(`printers.discovery.scanProgress`,{scanned:T.scanned,total:T.total}):r(`printers.discovery.scanning`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Zl,{className:`w-4 h-4`}),r(m||C?`printers.discovery.scanSubnet`:`printers.discovery.discoverNetwork`)]})}),u&&(0,G.jsx)(`div`,{className:`mt-2 text-sm text-red-700 dark:text-red-400`,children:u}),N.length>0&&(0,G.jsx)(`div`,{className:`mt-3 space-y-2 max-h-40 overflow-y-auto`,children:N.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-2 bg-bambu-dark rounded-lg hover:bg-bambu-dark-secondary cursor-pointer transition-colors`,onClick:()=>I(e),children:[(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`p`,{className:`font-medium text-white text-sm truncate`,children:e.name||e.serial}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray truncate`,children:[hG(e.model)||r(`printers.discovery.unknown`),` • `,e.ip_address,e.serial.startsWith(`unknown-`)&&(0,G.jsxs)(`span`,{className:`text-yellow-500`,children:[` • `,r(`printers.discovery.serialRequired`)]})]})]}),(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray -rotate-90 flex-shrink-0 ml-2`})]},e.serial))}),o&&(0,G.jsx)(`p`,{className:`mt-2 text-sm text-bambu-gray text-center`,children:r(m||C?`printers.discovery.scanningSubnet`:`printers.discovery.scanningNetwork`)}),f&&!o&&c.length===0&&(0,G.jsx)(`p`,{className:`mt-2 text-sm text-bambu-gray text-center`,children:r(m||C?`printers.discovery.noPrintersFoundSubnet`:`printers.discovery.noPrintersFoundNetwork`)}),f&&!o&&c.length>0&&N.length===0&&(0,G.jsx)(`p`,{className:`mt-2 text-sm text-bambu-gray text-center`,children:r(`printers.discovery.allConfigured`)})]}),(0,G.jsxs)(`form`,{onSubmit:P,className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`printers.name`)}),(0,G.jsx)(`input`,{type:`text`,required:!0,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:i.name,onChange:e=>a({...i,name:e.target.value}),placeholder:r(`printers.modal.myPrinter`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`printers.ipAddress`)}),(0,G.jsx)(`input`,{type:`text`,required:!0,pattern:`(\\d{1,3}(\\.\\d{1,3}){3}|[a-zA-Z0-9]([a-zA-Z0-9\\-]{0,61}[a-zA-Z0-9])?(\\.[a-zA-Z0-9]([a-zA-Z0-9\\-]{0,61}[a-zA-Z0-9])?)*)`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:i.ip_address,onChange:e=>a({...i,ip_address:e.target.value}),placeholder:`192.168.1.100 or printer.local`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`printers.serialNumber`)}),(0,G.jsx)(`input`,{type:`text`,required:!0,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:i.serial_number,onChange:e=>a({...i,serial_number:e.target.value}),placeholder:`01P00A000000000`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`printers.accessCode`)}),(0,G.jsx)(`input`,{type:`password`,required:!0,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:i.access_code,onChange:e=>a({...i,access_code:e.target.value}),placeholder:r(`printers.modal.fromPrinterSettings`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`printers.modal.modelOptional`)}),(0,G.jsxs)(`select`,{className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:i.model||``,onChange:e=>a({...i,model:e.target.value}),children:[(0,G.jsx)(`option`,{value:``,children:r(`printers.modal.selectModel`)}),(0,G.jsxs)(`optgroup`,{label:`A1 Series`,children:[(0,G.jsx)(`option`,{value:`A1`,children:`A1`}),(0,G.jsx)(`option`,{value:`A1 Mini`,children:`A1 Mini`})]}),(0,G.jsx)(`optgroup`,{label:`A2 Series`,children:(0,G.jsx)(`option`,{value:`A2L`,children:`A2L`})}),(0,G.jsxs)(`optgroup`,{label:`H2 Series`,children:[(0,G.jsx)(`option`,{value:`H2C`,children:`H2C`}),(0,G.jsx)(`option`,{value:`H2D`,children:`H2D`}),(0,G.jsx)(`option`,{value:`H2D Pro`,children:`H2D Pro`}),(0,G.jsx)(`option`,{value:`H2S`,children:`H2S`})]}),(0,G.jsxs)(`optgroup`,{label:`P Series`,children:[(0,G.jsx)(`option`,{value:`P1P`,children:`P1P`}),(0,G.jsx)(`option`,{value:`P1S`,children:`P1S`}),(0,G.jsx)(`option`,{value:`P2S`,children:`P2S`})]}),(0,G.jsxs)(`optgroup`,{label:`X1 Series`,children:[(0,G.jsx)(`option`,{value:`X1`,children:`X1`}),(0,G.jsx)(`option`,{value:`X1C`,children:`X1 Carbon`}),(0,G.jsx)(`option`,{value:`X1E`,children:`X1E`})]}),(0,G.jsx)(`optgroup`,{label:`X2 Series`,children:(0,G.jsx)(`option`,{value:`X2D`,children:`X2D`})})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`printers.modal.locationGroup`)}),(0,G.jsx)(`input`,{type:`text`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:i.location||``,onChange:e=>a({...i,location:e.target.value}),placeholder:r(`printers.modal.locationPlaceholder`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:r(`printers.locationHelp`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`checkbox`,id:`auto_archive`,checked:i.auto_archive,onChange:e=>a({...i,auto_archive:e.target.checked}),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsx)(`label`,{htmlFor:`auto_archive`,className:`text-sm text-bambu-gray`,children:r(`printers.modal.autoArchiveLabel`)})]}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>O(!0),disabled:!i.ip_address.trim(),className:`w-full flex items-center justify-center gap-2 px-3 py-2 text-sm text-bambu-gray hover:text-white disabled:opacity-40 disabled:cursor-not-allowed border border-bambu-dark-tertiary rounded-lg transition-colors`,children:[(0,G.jsx)(xu,{className:`w-4 h-4`}),r(`diagnostic.runButton`)]}),j?(0,G.jsxs)(`div`,{className:`rounded-lg bg-amber-50 dark:bg-amber-500/10 border border-amber-300 dark:border-amber-500/30 p-3 space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-start gap-2`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 mt-0.5 flex-shrink-0 text-amber-600 dark:text-amber-400`}),(0,G.jsx)(`p`,{className:`text-sm text-amber-700 dark:text-amber-300`,children:r(`printers.addPreflight.warning`)})]}),(0,G.jsx)(Up,{result:j}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:()=>M(null),className:`flex-1`,children:r(`printers.addPreflight.back`)}),(0,G.jsx)(Q,{type:`button`,onClick:()=>t(i),className:`flex-1`,children:r(`printers.addPreflight.saveAnyway`)})]})]}):(0,G.jsxs)(`div`,{className:`flex gap-3 pt-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:e,className:`flex-1`,children:r(`common.cancel`)}),(0,G.jsx)(Q,{type:`submit`,disabled:k,className:`flex-1`,children:r(k?`printers.addPreflight.checking`:`printers.addPrinter`)})]})]})]})})}),D&&(0,G.jsx)(Wp,{connection:{ip_address:i.ip_address.trim(),serial_number:i.serial_number.trim()||void 0,access_code:i.access_code||void 0},printerName:i.name||null,onClose:()=>O(!1)})]})}function yke({printer:e,firmwareInfo:t,onClose:n}){let{t:r}=U(),i=co(),{showToast:a}=Gd(),{hasPermission:o}=jd(),s=o(`firmware:update`),[c,l]=(0,y.useState)(null),[u,d]=(0,y.useState)(!1),[f,p]=(0,y.useState)(null),[m,h]=(0,y.useState)(t.update_available?t.latest_version:null),{data:g,isLoading:_}=K({queryKey:[`firmwarePrepare`,e.id,m],queryFn:()=>Td.prepareUpload(e.id,m??void 0),staleTime:3e4,enabled:!!m&&s&&!u}),v=q({mutationFn:()=>Td.startUpload(e.id,m??void 0),onSuccess:()=>{d(!0);let t=setInterval(async()=>{try{let n=await Td.getUploadStatus(e.id);l(n),(n.status===`complete`||n.status===`error`)&&(clearInterval(t),p(null),d(!1),n.status===`complete`&&(a(r(`printers.firmwareModal.uploadedToast`),`success`),i.invalidateQueries({queryKey:[`firmwareUpdate`,e.id]})))}catch{}},2e3);p(t)},onError:e=>{a(r(`printers.firmwareModal.uploadFailed`,{error:e.message}),`error`),d(!1)}});return(0,y.useEffect)(()=>()=>{f&&clearInterval(f)},[f]),(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50`,children:(0,G.jsx)(Ld,{className:`w-full max-w-md mx-4`,children:(0,G.jsxs)(zd,{children:[(0,G.jsxs)(`div`,{className:`flex items-start gap-3 mb-4`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-full ${t.update_available?`bg-orange-100 dark:bg-orange-500/20`:`bg-status-ok/20`}`,children:t.update_available?(0,G.jsx)(Ys,{className:`w-5 h-5 text-orange-600 dark:text-orange-400`}):(0,G.jsx)(xs,{className:`w-5 h-5 text-status-ok`})}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white`,children:t.update_available?r(`printers.firmwareModal.title`):r(`printers.firmwareModal.titleUpToDate`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:e.name})]})]}),(()=>{let e=m?t.available_versions?.find(e=>e.version===m):null,n=m??t.latest_version,i=e?.release_notes??t.release_notes,a=!!n&&n!==t.current_version;return(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-3 mb-4`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between items-center text-sm`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:r(`printers.firmwareModal.currentVersion`)}),(0,G.jsx)(`span`,{className:`font-mono ${a?`text-white`:`text-status-ok`}`,children:t.current_version||r(`common.unknown`)})]}),a&&(0,G.jsxs)(`div`,{className:`flex justify-between items-center text-sm mt-1`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:r(`printers.firmwareModal.latestVersion`)}),(0,G.jsx)(`span`,{className:`text-orange-700 dark:text-orange-400 font-mono`,children:n})]}),i&&(0,G.jsxs)(`details`,{className:`mt-3 text-sm`,open:!a,children:[(0,G.jsx)(`summary`,{className:`cursor-pointer hover:underline ${a?`text-orange-700 dark:text-orange-400`:`text-status-ok`}`,children:r(`printers.firmwareModal.releaseNotes`)}),(0,G.jsx)(`div`,{className:`mt-2 text-bambu-gray text-xs max-h-40 overflow-y-auto whitespace-pre-wrap`,children:i})]},n??`none`)]})})(),t.available_versions&&t.available_versions.length>0&&!u&&c?.status!==`complete`&&(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mb-2`,children:r(`printers.firmwareModal.availableVersions`)}),(0,G.jsx)(`div`,{className:`max-h-56 overflow-y-auto border border-bambu-dark-tertiary rounded-lg divide-y divide-bambu-dark-tertiary`,children:t.available_versions.map(e=>{let n=t.current_version===e.version,i=m===e.version,a=t.current_version?Cee(e.version,t.current_version):0,o=r(n?`printers.firmwareModal.currentBadge`:a>0?`printers.firmwareModal.newerBadge`:`printers.firmwareModal.olderBadge`),c=n?`text-bambu-gray`:a>0?`text-orange-700 dark:text-orange-400`:`text-blue-700 dark:text-blue-400`;return(0,G.jsxs)(`button`,{type:`button`,disabled:!e.file_available||!s||n,onClick:()=>h(e.version),className:`w-full text-left px-3 py-2 text-sm flex items-center justify-between gap-2 transition-colors ${i?`bg-orange-50 dark:bg-orange-500/10`:`hover:bg-bambu-dark`} ${!e.file_available||!s||n?`opacity-60 cursor-not-allowed`:`cursor-pointer`}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 min-w-0`,children:[(0,G.jsx)(`span`,{className:`font-mono text-white`,children:e.version}),(0,G.jsx)(`span`,{className:`text-xs ${c}`,children:o})]}),(0,G.jsx)(`span`,{className:`text-xs px-2 py-0.5 rounded-full ${n?`bg-blue-50 dark:bg-blue-500/15 text-blue-700 dark:text-blue-400 border border-blue-300 dark:border-blue-500/30`:e.file_available?`bg-bambu-green/15 text-bambu-green border border-bambu-green/30`:`bg-bambu-gray/10 text-bambu-gray border border-bambu-gray/30`}`,children:n?r(`printers.firmwareModal.installed`):e.file_available?r(`printers.firmwareModal.usable`):r(`printers.firmwareModal.unavailable`)})]},e.version)})})]}),m?_?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray text-sm mb-4`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),r(`printers.firmwareModal.checkingPrereqs`)]}):g&&!u&&!c?(0,G.jsx)(`div`,{className:`mb-4`,children:g.can_proceed?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-green text-sm`,children:[(0,G.jsx)(Zo,{className:`w-4 h-4`}),r(`printers.firmwareModal.sdCardReady`)]}):(0,G.jsx)(`div`,{className:`space-y-1`,children:g.errors.map((e,t)=>(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-red-700 dark:text-red-400 text-sm`,children:[(0,G.jsx)(ys,{className:`w-4 h-4 flex-shrink-0`}),e]},t))})}):null:null,(u||c)&&c&&(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-sm mb-1`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray capitalize`,children:c.status}),(0,G.jsxs)(`span`,{className:`text-white`,children:[c.progress,`%`]})]}),(0,G.jsx)(`div`,{className:`w-full bg-bambu-dark-tertiary rounded-full h-2`,children:(0,G.jsx)(`div`,{className:`h-2 rounded-full transition-all ${c.status===`error`?`bg-status-error`:c.status===`complete`?`bg-status-ok`:`bg-orange-500`} ${c.status===`uploading`?`animate-pulse`:``}`,style:{width:`${c.progress}%`}})}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:c.message}),c.error&&(0,G.jsx)(`p`,{className:`text-xs text-red-700 dark:text-red-400 mt-1`,children:c.error})]}),c?.status===`complete`&&(0,G.jsxs)(`div`,{className:`bg-bambu-green/10 border border-bambu-green/30 rounded-lg p-3 mb-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-green font-medium mb-2`,children:r(`printers.firmwareModal.uploadedSuccess`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:r(`printers.firmwareModal.applyInstructions`)}),(0,G.jsxs)(`ol`,{className:`text-xs text-bambu-gray mt-1 list-decimal list-inside space-y-1`,children:[(0,G.jsx)(`li`,{dangerouslySetInnerHTML:{__html:r(`printers.firmwareModal.step1`)}}),(0,G.jsx)(`li`,{dangerouslySetInnerHTML:{__html:r(`printers.firmwareModal.step2`)}}),(0,G.jsx)(`li`,{dangerouslySetInnerHTML:{__html:r(`printers.firmwareModal.step3`)}}),(0,G.jsx)(`li`,{children:r(`printers.firmwareModal.step4`)})]})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 justify-end`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:n,children:c?.status===`complete`?r(`printers.firmwareModal.done`):r(`common.cancel`)}),g?.can_proceed&&!u&&c?.status!==`complete`&&s&&(0,G.jsx)(Q,{onClick:()=>{l(null),v.mutate()},disabled:v.isPending,children:v.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin mr-2`}),r(`printers.firmwareModal.starting`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ys,{className:`w-4 h-4 mr-2`}),r(`printers.firmwareModal.uploadFirmware`)]})})]})]})})})}function bke({printer:e,onClose:t}){let{t:n}=U(),r=co(),{showToast:i}=Gd(),[a,o]=(0,y.useState)({name:e.name,ip_address:e.ip_address,access_code:``,model:e.model||``,location:e.location||``,auto_archive:e.auto_archive,is_active:e.is_active}),[s,c]=(0,y.useState)(!1),[l,u]=(0,y.useState)(null),d=q({mutationFn:t=>Z.updatePrinter(e.id,t),onSuccess:()=>{r.invalidateQueries({queryKey:[`printers`]}),r.invalidateQueries({queryKey:[`printerStatus`,e.id]}),t()},onError:e=>i(e.message||n(`printers.toast.failedToUpdate`),`error`)});(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&t()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[t]);let f=()=>{let e={name:a.name,ip_address:a.ip_address,model:a.model||void 0,location:a.location||void 0,auto_archive:a.auto_archive,is_active:a.is_active};a.access_code&&(e.access_code=a.access_code),d.mutate(e)};return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-start sm:items-center justify-center z-50 p-4 overflow-y-auto`,onClick:t,children:(0,G.jsx)(Ld,{className:`w-full max-w-md my-auto max-h-[calc(100vh-2rem)] overflow-y-auto`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(zd,{children:[(0,G.jsx)(`h2`,{className:`text-xl font-semibold mb-4`,children:n(`printers.editPrinter`)}),(0,G.jsxs)(`form`,{onSubmit:async t=>{t.preventDefault(),c(!0);try{let t=await Z.diagnoseConnection({ip_address:a.ip_address.trim(),serial_number:e.serial_number,access_code:a.access_code||void 0});if(t.checks.some(e=>e.status===`fail`)){u(t);return}}catch{}finally{c(!1)}f()},className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`printers.name`)}),(0,G.jsx)(`input`,{type:`text`,required:!0,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:a.name,onChange:e=>o({...a,name:e.target.value}),placeholder:n(`printers.modal.myPrinter`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`printers.ipAddress`)}),(0,G.jsx)(`input`,{type:`text`,required:!0,pattern:`(\\d{1,3}(\\.\\d{1,3}){3}|[a-zA-Z0-9]([a-zA-Z0-9\\-]{0,61}[a-zA-Z0-9])?(\\.[a-zA-Z0-9]([a-zA-Z0-9\\-]{0,61}[a-zA-Z0-9])?)*)`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:a.ip_address,onChange:e=>o({...a,ip_address:e.target.value}),placeholder:`192.168.1.100 or printer.local`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`printers.serialNumber`)}),(0,G.jsx)(`input`,{type:`text`,disabled:!0,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray cursor-not-allowed`,value:e.serial_number}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(`printers.serialCannotBeChanged`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`printers.accessCode`)}),(0,G.jsx)(`input`,{type:`password`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:a.access_code,onChange:e=>o({...a,access_code:e.target.value}),placeholder:n(`printers.accessCodePlaceholder`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`printers.model`)}),(0,G.jsxs)(`select`,{className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:a.model,onChange:e=>o({...a,model:e.target.value}),children:[(0,G.jsx)(`option`,{value:``,children:n(`printers.modal.selectModel`)}),(0,G.jsxs)(`optgroup`,{label:`A1 Series`,children:[(0,G.jsx)(`option`,{value:`A1`,children:`A1`}),(0,G.jsx)(`option`,{value:`A1 Mini`,children:`A1 Mini`})]}),(0,G.jsx)(`optgroup`,{label:`A2 Series`,children:(0,G.jsx)(`option`,{value:`A2L`,children:`A2L`})}),(0,G.jsxs)(`optgroup`,{label:`H2 Series`,children:[(0,G.jsx)(`option`,{value:`H2C`,children:`H2C`}),(0,G.jsx)(`option`,{value:`H2D`,children:`H2D`}),(0,G.jsx)(`option`,{value:`H2D Pro`,children:`H2D Pro`}),(0,G.jsx)(`option`,{value:`H2S`,children:`H2S`})]}),(0,G.jsxs)(`optgroup`,{label:`P Series`,children:[(0,G.jsx)(`option`,{value:`P1P`,children:`P1P`}),(0,G.jsx)(`option`,{value:`P1S`,children:`P1S`}),(0,G.jsx)(`option`,{value:`P2S`,children:`P2S`})]}),(0,G.jsxs)(`optgroup`,{label:`X1 Series`,children:[(0,G.jsx)(`option`,{value:`X1`,children:`X1`}),(0,G.jsx)(`option`,{value:`X1C`,children:`X1 Carbon`}),(0,G.jsx)(`option`,{value:`X1E`,children:`X1E`})]}),(0,G.jsx)(`optgroup`,{label:`X2 Series`,children:(0,G.jsx)(`option`,{value:`X2D`,children:`X2D`})})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:`Location / Group`}),(0,G.jsx)(`input`,{type:`text`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:a.location,onChange:e=>o({...a,location:e.target.value}),placeholder:n(`printers.modal.locationPlaceholder`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(`printers.locationHelp`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`checkbox`,id:`edit_auto_archive`,checked:a.auto_archive,onChange:e=>o({...a,auto_archive:e.target.checked}),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsx)(`label`,{htmlFor:`edit_auto_archive`,className:`text-sm text-bambu-gray`,children:n(`printers.modal.autoArchiveLabel`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`checkbox`,id:`edit_maintenance_mode`,checked:!a.is_active,onChange:e=>o({...a,is_active:!e.target.checked}),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-amber-400 focus:ring-amber-400`}),(0,G.jsxs)(`label`,{htmlFor:`edit_maintenance_mode`,className:`text-sm text-bambu-gray flex items-center gap-1.5`,children:[(0,G.jsx)(ed,{className:`w-3.5 h-3.5 text-amber-600 dark:text-amber-400`}),n(`printers.maintenance.editFieldLabel`)]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/70 mt-1 ml-6`,children:n(`printers.maintenance.editFieldHelp`)})]}),l?(0,G.jsxs)(`div`,{className:`rounded-lg bg-amber-50 dark:bg-amber-500/10 border border-amber-300 dark:border-amber-500/30 p-3 space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-start gap-2`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 mt-0.5 flex-shrink-0 text-amber-600 dark:text-amber-400`}),(0,G.jsx)(`p`,{className:`text-sm text-amber-700 dark:text-amber-300`,children:n(`printers.addPreflight.warning`)})]}),(0,G.jsx)(Up,{result:l}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:()=>u(null),className:`flex-1`,children:n(`printers.addPreflight.back`)}),(0,G.jsx)(Q,{type:`button`,onClick:f,className:`flex-1`,disabled:d.isPending,children:n(`printers.addPreflight.saveAnyway`)})]})]}):(0,G.jsxs)(`div`,{className:`flex gap-3 pt-4`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:t,className:`flex-1`,children:n(`common.cancel`)}),(0,G.jsx)(Q,{type:`submit`,className:`flex-1`,disabled:d.isPending||s,children:s?n(`printers.addPreflight.checking`):d.isPending?n(`common.saving`):n(`printers.modal.saveChanges`)})]})]})]})})})}function xke(e){let{data:t}=K({queryKey:[`printerStatus`,e],queryFn:()=>Z.getPrinterStatus(e),refetchInterval:3e4});return!t?.connected}function Ske({printer:e,plug:t,onPowerOn:n,isPowering:r}){let i=xke(e.id),{data:a}=K({queryKey:[`smartPlugStatus`,t.id],queryFn:()=>Z.getSmartPlugStatus(t.id),refetchInterval:1e4});return i?(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-3 py-2 hover:bg-gray-100 dark:hover:bg-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 min-w-0`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white truncate`,children:e.name}),a&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded ${a.state===`ON`?`bg-bambu-green/20 text-bambu-green`:`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`}`,children:a.state||`?`})]}),(0,G.jsxs)(`button`,{onClick:()=>n(t.id),disabled:r||a?.state===`ON`,className:`px-2 py-1 text-xs rounded transition-colors flex items-center gap-1 ${a?.state===`ON`?`bg-bambu-green/20 text-bambu-green cursor-default`:`bg-bambu-green/20 text-bambu-green hover:bg-bambu-green hover:text-white`}`,children:[(0,G.jsx)(Il,{className:`w-3 h-3`}),r?`...`:`On`]})]}):null}function Cke(){let{t:e}=U(),{resolvedMode:t,darkAccent:n,lightAccent:r}=Pd(),i={green:`bg-green-500 text-white hover:bg-green-400 border-green-400/60`,teal:`bg-teal-500 text-white hover:bg-teal-400 border-teal-400/60`,blue:`bg-blue-500 text-white hover:bg-blue-400 border-blue-400/60`,orange:`bg-orange-500 text-white hover:bg-orange-400 border-orange-400/60`,purple:`bg-purple-500 text-white hover:bg-purple-400 border-purple-400/60`,red:`bg-red-500 text-white hover:bg-red-400 border-red-400/60`}[t===`dark`?n:r],[a,o]=(0,y.useState)(!1),[s,c]=(0,y.useState)(()=>localStorage.getItem(`hideDisconnectedPrinters`)===`true`),[l,u]=(0,y.useState)(!1),[d,f]=(0,y.useState)(null),[p,m]=(0,y.useState)(()=>localStorage.getItem(`printerSortBy`)||`name`),[h,g]=(0,y.useState)(()=>localStorage.getItem(`printerSortAsc`)!==`false`),[_,v]=(0,y.useState)(()=>{let e=localStorage.getItem(`printerCardSize`);return e?parseInt(e,10):2}),[b,x]=(0,y.useState)(()=>localStorage.getItem(`printerPageView`)===`camwall`?`camwall`:`cards`),[S,C]=(0,y.useState)(()=>{let e=parseInt(localStorage.getItem(`camWallMaxLive`)||``,10);return Number.isFinite(e)&&e>0?e:4}),[w,T]=(0,y.useState)(()=>{let e=parseInt(localStorage.getItem(`camWallSnapshotSec`)||``,10);return Number.isFinite(e)&&e>0?e:8}),[E,D]=(0,y.useState)(()=>{let e=localStorage.getItem(`camWallStatusMode`);return e===`off`||e===`compact`||e===`full`?e:`full`}),O=_===1?`compact`:`expanded`,[k,A]=(0,y.useState)(null),j=(0,y.useCallback)(e=>{requestAnimationFrame(()=>{requestAnimationFrame(()=>{let t=document.getElementById(`printer-card-${e}`);if(!t)return;let n=document.querySelector(`header`)?.getBoundingClientRect().height??56,r=t.getBoundingClientRect().top+window.scrollY-n-16;window.scrollTo({top:Math.max(0,r),behavior:`smooth`})})})},[]),M=(0,y.useCallback)(e=>{A(e),v(2),localStorage.setItem(`printerCardSize`,`2`),j(e)},[j]),N=(0,y.useCallback)(()=>{let e=k;A(null),v(1),localStorage.setItem(`printerCardSize`,`1`),e!=null&&j(e)},[k,j]),[P,F]=(0,y.useState)(``),[I,L]=(0,y.useState)(()=>{let e=localStorage.getItem(`printerStatusFilter`);return XOe(e)?e:`all`}),[R,z]=(0,y.useState)(()=>localStorage.getItem(`printerLocationFilter`)||`all`),[B,V]=(0,y.useState)(0),[ee,te]=(0,y.useState)(()=>{try{let e=localStorage.getItem(`printerCollapsedSections`);return e?JSON.parse(e):{}}catch{return{}}}),ne=co(),{showToast:re}=Gd(),{hasPermission:ie}=jd(),[ae,oe]=(0,y.useState)(()=>kee()),[se,H]=(0,y.useState)(()=>{let e=localStorage.getItem(`openEmbeddedCameras`);if(e)try{let t=JSON.parse(e);return new Map(t.map(e=>[e.id,e]))}catch{return new Map}return new Map});(0,y.useEffect)(()=>{let e=Array.from(se.values());e.length>0?localStorage.setItem(`openEmbeddedCameras`,JSON.stringify(e)):localStorage.removeItem(`openEmbeddedCameras`)},[se]);let{data:ce,isLoading:le}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:ue}=K({queryKey:[`ui-preferences`],queryFn:Z.getUiPreferences}),de=(0,y.useMemo)(()=>wm(ue?.nozzle_temp_presets,bm,0,320),[ue?.nozzle_temp_presets]),fe=(0,y.useMemo)(()=>wm(ue?.bed_temp_presets,xm,0,140),[ue?.bed_temp_presets]),pe=(0,y.useMemo)(()=>wm(ue?.chamber_temp_presets,Sm,0,65),[ue?.chamber_temp_presets]),me=(0,y.useMemo)(()=>wm(ue?.fan_speed_presets,Cm,0,100),[ue?.fan_speed_presets]),he=(0,y.useMemo)(()=>{if(ue?.drying_presets)try{let e=JSON.parse(ue.drying_presets);if(typeof e==`object`&&e&&Object.keys(e).length>0)return{..._G,...e}}catch{}return _G},[ue?.drying_presets]),ge=ae??(ue?.camera_view_mode===`embedded`?`embedded`:`window`),_e=(0,y.useCallback)(e=>{Aee(e),oe(e),ie(`settings:update`)&&Z.updateSettings({camera_view_mode:e}).then(()=>ne.invalidateQueries({queryKey:[`ui-preferences`]})).catch(e=>console.warn(`Could not save camera view mode as the default:`,e))},[ie,ne]),{data:ve}=K({queryKey:[`smart-plugs`],queryFn:Z.getSmartPlugs}),{data:ye}=K({queryKey:[`maintenanceOverview`],queryFn:Z.getMaintenanceOverview,staleTime:60*1e3}),{data:be}=K({queryKey:[`obico-printer-status`],queryFn:Z.getObicoPrinterStatus,refetchInterval:1e4}),xe=(0,y.useCallback)(e=>be?.enabled===!0&&(be.monitored_printers===null||be.monitored_printers.includes(e)),[be]),{data:Se}=K({queryKey:[`spoolman-status`],queryFn:Z.getSpoolmanStatus,staleTime:60*1e3}),Ce=Se?.enabled&&Se?.connected,{data:we}=K({queryKey:[`spoolman-settings`],queryFn:Z.getSpoolmanSettings,enabled:!!Ce,staleTime:60*1e3}),Te=we?.spoolman_sync_mode,{data:Ee}=K({queryKey:[`unlinked-spools`],queryFn:Z.getUnlinkedSpools,enabled:!!Ce,staleTime:30*1e3}),De=Ee&&Ee.length>0,{data:Oe}=K({queryKey:[`linked-spools`],queryFn:Z.getLinkedSpools,enabled:!!Ce,staleTime:30*1e3}),ke=Oe?.linked,{data:Ae}=K({queryKey:[`spool-assignments`],queryFn:()=>Z.getAssignments(),enabled:ie(`inventory:view_assignments`),staleTime:30*1e3}),je=q({mutationFn:({printerId:e,amsId:t,trayId:n})=>Z.unassignSpool(e,t,n),onSuccess:()=>{ne.invalidateQueries({queryKey:[`spool-assignments`]})}}),{data:Me,isLoading:Ne}=K({queryKey:[`spoolman-inventory-spools`],queryFn:()=>Z.getSpoolmanInventorySpools(!1),enabled:!!Ce,staleTime:30*1e3}),{data:Pe,isLoading:Fe}=K({queryKey:[`spoolman-slot-assignments`],queryFn:()=>Z.getSpoolmanSlotAssignments(),enabled:!!Ce,staleTime:30*1e3}),Ie=q({mutationFn:e=>Z.unassignSpoolmanSlot(e),onSuccess:()=>{ne.invalidateQueries({queryKey:[`spoolman-inventory-spools`]}),ne.invalidateQueries({queryKey:[`spoolman-slot-assignments`]})}}),Le=(e,t,n)=>Ae?.find(r=>r.printer_id===e&&r.ams_id===Number(t)&&r.tray_id===Number(n)),Re=ye?.reduce((e,t)=>(e[t.printer_id]={due_count:t.due_count,warning_count:t.warning_count,total_print_hours:t.total_print_hours},e),{})||{},ze=ve?.reduce((e,t)=>(t.printer_id&&(e[t.printer_id]=t),e),{})||{},Be=q({mutationFn:Z.createPrinter,onSuccess:()=>{ne.invalidateQueries({queryKey:[`printers`]}),ne.invalidateQueries({queryKey:[`maintenanceOverview`]}),o(!1)},onError:t=>{if(t instanceof od&&t.code===`printer_connection_failed`){re(e(`printers.toast.connectionFailedNotAdded`),`error`);return}re(t.message||e(`printers.toast.failedToAdd`),`error`)}}),Ve=q({mutationFn:e=>Z.controlSmartPlug(e,`on`),onSuccess:()=>{ne.invalidateQueries({queryKey:[`smart-plugs`]}),f(null)},onError:()=>{f(null)}}),[He,Ue]=(0,y.useState)(new Set),[We,Ge]=(0,y.useState)(!1),[Ke,qe]=(0,y.useState)(null),[Je,Ye]=(0,y.useState)(!1),Xe=We||He.size>0,Ze=(0,y.useCallback)(e=>{Ue(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},[]),Qe=(0,y.useCallback)(()=>{Ue(new Set),Ge(!1)},[]);(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&Xe&&Qe()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[Xe,Qe]);let $e=(0,y.useCallback)(async t=>{Ye(!0);let n=Array.from(He).filter(e=>{let n=ne.getQueryData([`printerStatus`,e]);if(t===`clearPlate`)return!!n?.awaiting_plate_clear;if(!n?.connected)return!1;switch(t){case`stop`:return n.state===`RUNNING`||n.state===`PAUSE`;case`pause`:return n.state===`RUNNING`;case`resume`:return n.state===`PAUSE`;case`clearHMS`:return n.hms_errors&&Dm(n.hms_errors).length>0;default:return!1}});if(n.length===0){re(e(`printers.bulk.noneApplicable`),`error`),Ye(!1),qe(null);return}let r={stop:Z.stopPrint,pause:Z.pausePrint,resume:Z.resumePrint,clearPlate:Z.clearPlate,clearHMS:Z.clearHMSErrors}[t],i=await Promise.allSettled(n.map(e=>r(e))),a=i.filter(e=>e.status===`fulfilled`).length,o=i.filter(e=>e.status===`rejected`).length;o===0?re(e(`printers.bulk.success`,{action:e(`printers.bulk.actions.${t}`),count:a})):re(e(`printers.bulk.partial`,{succeeded:a,failed:o}),`error`),n.forEach(e=>{ne.invalidateQueries({queryKey:[`printerStatus`,e]})}),Ye(!1),qe(null)},[He,ne,re,e]),et=(0,y.useCallback)(e=>{e===`stop`||e===`pause`||e===`clearPlate`?qe(e):$e(e)},[$e]),tt=()=>{let e=!s;c(e),localStorage.setItem(`hideDisconnectedPrinters`,String(e))},nt=e=>{m(e),localStorage.setItem(`printerSortBy`,e)},rt=e=>{L(e),localStorage.setItem(`printerStatusFilter`,e)},it=e=>{z(e),localStorage.setItem(`printerLocationFilter`,e)},at=()=>{let e=!h;g(e),localStorage.setItem(`printerSortAsc`,String(e))},ot=()=>{switch(_){case 1:return`grid-cols-1 sm:grid-cols-2 md:grid-cols-3 lg:grid-cols-4 xl:grid-cols-5`;case 2:return`grid-cols-1 md:grid-cols-2 xl:grid-cols-3`;case 3:return`grid-cols-1 lg:grid-cols-2`;case 4:return`grid-cols-1`;default:return`grid-cols-1 md:grid-cols-2 xl:grid-cols-3`}},st=[`S`,`M`,`L`,`XL`];(0,y.useEffect)(()=>ne.getQueryCache().subscribe(e=>{e.type===`updated`&&Array.isArray(e.query.queryKey)&&e.query.queryKey[0]===`printerStatus`&&V(e=>e+1)}),[ne]);let ct=(0,y.useMemo)(()=>{if(!ce)return[];let e=ce;if(P.trim()){let t=P.trim().toLowerCase();e=e.filter(e=>e.name.toLowerCase().includes(t)||(e.model||``).toLowerCase().includes(t)||(e.location||``).toLowerCase().includes(t)||(e.serial_number||``).toLowerCase().includes(t))}return R!==`all`&&(e=e.filter(e=>(e.location||``)===R)),I!==`all`&&(e=e.filter(e=>{let t=ne.getQueryData([`printerStatus`,e.id]);if(!t?.connected)return I===`offline`;let n=t.hms_errors?Dm(t.hms_errors):[];switch(I){case`printing`:return t.state===`RUNNING`;case`paused`:return t.state===`PAUSE`;case`finished`:return t.state===`FINISH`;case`error`:return t.state===`FAILED`||n.length>0;case`idle`:return t.state!==`RUNNING`&&t.state!==`PAUSE`&&t.state!==`FINISH`&&t.state!==`FAILED`&&n.length===0;case`offline`:return!1;default:return!0}})),e},[ce,P,I,R,ne,B]),lt=(0,y.useMemo)(()=>ce?[...new Set(ce.map(e=>e.location||``).filter(Boolean))].sort():[],[ce]);(0,y.useEffect)(()=>{!ce||R===`all`||lt.includes(R)||(z(`all`),localStorage.setItem(`printerLocationFilter`,`all`))},[ce,lt,R]);let ut=(0,y.useMemo)(()=>{let e=[...ct];switch(p){case`name`:e.sort((e,t)=>e.name.localeCompare(t.name));break;case`model`:e.sort((e,t)=>(e.model||``).localeCompare(t.model||``));break;case`location`:e.sort((e,t)=>{let n=e.location||``,r=t.location||``;return!n&&r?1:n&&!r?-1:n.localeCompare(r)||e.name.localeCompare(t.name)});break;case`status`:e.sort((e,t)=>{let n=ne.getQueryData([`printerStatus`,e.id]),r=ne.getQueryData([`printerStatus`,t.id]),i=e=>e?.connected?(e.hms_errors?Dm(e.hms_errors):[]).length>0?0:e.state===`RUNNING`?1:2:3;return i(n)-i(r)});break;case`eta`:e.sort((e,t)=>{let n=ne.getQueryData([`printerStatus`,e.id]),r=ne.getQueryData([`printerStatus`,t.id]),i=e=>e?.connected?e.state===`RUNNING`&&e.remaining_time!=null&&e.remaining_time>0?0:e.state===`RUNNING`?1:2:3,a=i(n),o=i(r);if(a!==o)return a-o;if(a===0){let e=(n.remaining_time??0)-(r.remaining_time??0);if(e!==0)return e}return e.name.localeCompare(t.name)});break}return h||e.reverse(),e},[ct,p,h,ne]),dt=(0,y.useCallback)(()=>{Ue(new Set(ut.map(e=>e.id))),Ge(!0)},[ut]),ft=(0,y.useCallback)(e=>{Ue(t=>{let n=new Set(t);return ut.forEach(t=>{mG(ne.getQueryData([`printerStatus`,t.id]))===e&&n.add(t.id)}),n}),Ge(!0)},[ut,ne]),pt=(0,y.useCallback)(e=>{Ue(t=>{let n=new Set(t);return ut.filter(t=>(t.location||``)===e).forEach(e=>n.add(e.id)),n}),Ge(!0)},[ut]),mt=(0,y.useCallback)(e=>{Ue(t=>{let n=new Set(t);return ut.filter(t=>(t.model||`Unknown`)===e).forEach(e=>n.add(e.id)),n}),Ge(!0)},[ut]),ht=(0,y.useCallback)(e=>{te(t=>{let n={...t,[e]:!t[e]};try{localStorage.setItem(`printerCollapsedSections`,JSON.stringify(n))}catch{}return n})},[]),gt=(0,y.useMemo)(()=>{if(p===`name`||p===`eta`)return null;let e={};return p===`location`?ut.forEach(t=>{let n=t.location||`Ungrouped`;e[n]||(e[n]=[]),e[n].push(t)}):p===`model`?ut.forEach(t=>{let n=t.model||`Unknown`;e[n]||(e[n]=[]),e[n].push(t)}):p===`status`&&ut.forEach(t=>{let n=mG(ne.getQueryData([`printerStatus`,t.id]));e[n]||(e[n]=[]),e[n].push(t)}),e},[p,ut,ne,B]),_t=(0,y.useRef)(null),vt=(0,y.useRef)(null),yt=(0,y.useRef)(0),[bt,xt]=(0,y.useState)(!1),St=(0,y.useCallback)(()=>{let e=_t.current;if(!e)return;let t=vt.current?.offsetWidth;t&&(yt.current=t);let n=yt.current>0&&e.clientWidth<yt.current+220+8;xt(e=>e===n?e:n)},[]),Ct=Object.keys(ze).length;(0,y.useLayoutEffect)(()=>{St();let e=_t.current;if(!e)return;if(typeof ResizeObserver>`u`)return window.addEventListener(`resize`,St),()=>window.removeEventListener(`resize`,St);let t=new ResizeObserver(()=>St());return t.observe(e),window.addEventListener(`resize`,St),()=>{t.disconnect(),window.removeEventListener(`resize`,St)}},[St,ce?.length,lt.length,s,Ct]);let wt=(t=!1)=>(0,G.jsxs)(G.Fragment,{children:[ce&&ce.length>0&&(0,G.jsx)(lG,{value:I,onChange:rt,fullWidth:t,options:XW.map(t=>({value:t.value,label:e(t.labelKey)}))}),ce&&ce.length>0&&lt.length>0&&(0,G.jsx)(lG,{value:R,onChange:it,fullWidth:t,options:[{value:`all`,label:e(`printers.filter.allLocations`)},...lt.map(e=>({value:e,label:e}))]}),(0,G.jsx)(`button`,{type:`button`,onClick:tt,"aria-pressed":s,className:`h-8 px-2 rounded-lg border text-sm font-medium transition-colors ${t?`w-full`:``} ${s?`bg-bambu-green border-bambu-green text-white`:`bg-bambu-dark border-bambu-dark-tertiary text-white hover:bg-bambu-dark-tertiary`}`,children:e(`printers.hideOffline`)})]}),Tt=(t=!1)=>(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1 ${t?`w-full`:``}`,children:[(0,G.jsx)(lG,{value:p,onChange:nt,fullWidth:t,options:[{value:`name`,label:e(`printers.sort.name`)},{value:`status`,label:e(`printers.sort.status`)},{value:`model`,label:e(`printers.sort.model`)},{value:`location`,label:e(`printers.sort.location`)},{value:`eta`,label:e(`printers.sort.eta`)}]}),(0,G.jsx)(`button`,{onClick:at,className:`h-8 shrink-0 px-2 rounded-lg border bg-bambu-dark border-bambu-dark-tertiary text-white hover:bg-bambu-dark-tertiary transition-colors flex items-center justify-center`,title:e(h?`printers.sort.descending`:`printers.sort.ascending`),children:h?(0,G.jsx)(Ho,{className:`w-4 h-4 text-white`}):(0,G.jsx)(Io,{className:`w-4 h-4 text-white`})})]}),(0,G.jsxs)(`div`,{className:`flex h-8 items-center bg-bambu-dark rounded-lg border border-bambu-dark-tertiary ${t?`w-full`:``}`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{x(`cards`),localStorage.setItem(`printerPageView`,`cards`)},className:`flex h-full items-center gap-1 rounded-l-lg px-2 text-xs font-medium transition-colors ${t?`flex-1 justify-center`:``} ${b===`cards`?`bg-bambu-green text-white`:`text-white hover:bg-bambu-dark-tertiary`}`,title:e(`printers.pageView.cards`),"aria-pressed":b===`cards`,children:[(0,G.jsx)(Jc,{className:`w-3.5 h-3.5`}),t&&(0,G.jsx)(`span`,{children:e(`printers.pageView.cards`)})]}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{x(`camwall`),localStorage.setItem(`printerPageView`,`camwall`)},className:`flex h-full items-center gap-1 rounded-r-lg px-2 text-xs font-medium transition-colors ${t?`flex-1 justify-center`:``} ${b===`camwall`?`bg-bambu-green text-white`:`text-white hover:bg-bambu-dark-tertiary`}`,title:e(`printers.pageView.camWall`),"aria-pressed":b===`camwall`,disabled:!ie(`camera:view`),children:[(0,G.jsx)(ml,{className:`w-3.5 h-3.5`}),t&&(0,G.jsx)(`span`,{children:e(`printers.pageView.camWall`)})]})]}),b===`camwall`&&ie(`camera:view`)&&(0,G.jsxs)(Ai,{to:`/camwall`,className:`flex h-8 items-center gap-1 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark px-2 text-xs font-medium text-white transition-colors hover:bg-bambu-dark-tertiary ${t?`w-full justify-center`:``}`,title:e(`printers.pageView.openCamWallPage`),children:[(0,G.jsx)(nc,{className:`w-3.5 h-3.5`}),t&&(0,G.jsx)(`span`,{children:e(`printers.pageView.openCamWallPage`)})]}),(0,G.jsx)(`div`,{className:`flex h-8 items-center bg-bambu-dark rounded-lg border border-bambu-dark-tertiary ${b===`camwall`?`opacity-40 pointer-events-none`:``} ${t?`w-full`:``}`,children:st.map((n,r)=>{let i=r+1,a=_===i;return(0,G.jsx)(`button`,{onClick:()=>{A(null),v(i),localStorage.setItem(`printerCardSize`,String(i))},className:`h-full px-2 text-xs font-medium transition-colors ${t?`flex-1`:``} ${r===0?`rounded-l-lg`:``} ${r===st.length-1?`rounded-r-lg`:``} ${a?`bg-bambu-green text-white`:`text-white hover:bg-bambu-dark-tertiary`}`,title:e(n===`S`?`printers.cardSize.small`:n===`M`?`printers.cardSize.medium`:n===`L`?`printers.cardSize.large`:`printers.cardSize.extraLarge`),children:n},n)})})]}),Et=(t=!1)=>(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`button`,{onClick:()=>{Xe?Qe():Ge(!0)},className:`h-8 px-2 rounded-lg border transition-colors ${t?`w-full justify-center gap-1.5 text-sm font-medium flex items-center`:``} ${Xe?`bg-bambu-green border-bambu-green text-white`:`bg-bambu-dark border-bambu-dark-tertiary text-white hover:bg-bambu-dark-tertiary`}`,title:e(`printers.bulk.select`),disabled:!ie(`printers:control`),children:[(0,G.jsx)(_u,{className:`w-4 h-4`}),t&&(0,G.jsx)(`span`,{children:e(`printers.bulk.select`)})]}),s&&Object.keys(ze).length>0&&(0,G.jsxs)(`div`,{className:`relative ${t?`w-full`:``}`,children:[(0,G.jsxs)(`button`,{onClick:()=>u(!l),className:`h-8 flex items-center gap-1.5 px-2 text-sm rounded-lg border transition-colors ${t?`w-full justify-between bg-bambu-dark border-bambu-dark-tertiary text-white hover:bg-bambu-dark-tertiary hover:text-white`:`bg-bambu-dark border-bambu-dark-tertiary text-white hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(Il,{className:`w-4 h-4`}),e(`printers.powerOn`)]}),(0,G.jsx)(ps,{className:`w-3 h-3 transition-transform ${l?`rotate-180`:``}`})]}),l&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-10`,onClick:()=>u(!1)}),(0,G.jsxs)(`div`,{className:`absolute right-0 mt-2 w-56 bg-white dark:bg-bambu-dark-secondary border border-gray-200 dark:border-bambu-dark-tertiary rounded-lg shadow-lg z-20 py-1`,children:[(0,G.jsx)(`div`,{className:`px-3 py-2 text-xs text-gray-500 dark:text-bambu-gray border-b border-gray-200 dark:border-bambu-dark-tertiary`,children:e(`printers.offlinePrintersWithPlugs`)}),ce?.filter(e=>ze[e.id]).map(e=>(0,G.jsx)(Ske,{printer:e,plug:ze[e.id],onPowerOn:e=>{f(e),Ve.mutate(e)},isPowering:d===ze[e.id]?.id},e.id)),ce?.filter(e=>ze[e.id]).length===0&&(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:`No printers with smart plugs`})]})]})]}),(0,G.jsxs)(Q,{onClick:()=>o(!0),disabled:!ie(`printers:create`),title:ie(`printers:create`)?void 0:e(`printers.permission.noAdd`),className:`!h-8 !min-h-8 px-2 py-0 ${t?`w-full`:``}`,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),e(`printers.addPrinter`)]})]});return(0,G.jsxs)(`div`,{className:`p-4 md:p-8`,children:[(0,G.jsxs)(`div`,{className:`space-y-3 mb-6`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(Ll,{className:`w-7 h-7 text-bambu-green`}),e(`printers.title`)]}),(0,G.jsx)(uke,{printers:ce})]}),(0,G.jsxs)(`div`,{ref:_t,className:`relative flex items-center gap-2`,children:[ce&&ce.length>0&&(0,G.jsxs)(`div`,{className:`relative min-w-0 flex-1`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray/50`}),(0,G.jsx)(`input`,{type:`search`,name:`printer-search`,autoComplete:`off`,"data-1p-ignore":!0,"data-lpignore":`true`,value:P,onChange:e=>F(e.target.value),placeholder:e(`printers.search`),"aria-label":e(`printers.search`),className:`w-full h-8 pl-9 pr-8 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`}),P&&(0,G.jsx)(`button`,{type:`button`,"aria-label":e(`common.clear`),onClick:()=>F(``),className:`absolute right-3 top-1/2 -translate-y-1/2 text-bambu-gray hover:text-white`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}),(0,G.jsxs)(`div`,{ref:vt,"aria-hidden":bt,inert:bt,className:`${bt?`absolute -left-[9999px] top-0 flex w-max pointer-events-none opacity-0`:`flex`} ml-auto items-center justify-end gap-2 flex-nowrap [&>*]:shrink-0`,children:[(0,G.jsx)(`div`,{className:`h-6 w-px bg-bambu-dark-tertiary`}),(0,G.jsx)(`div`,{className:`flex items-center gap-2`,children:wt()}),(0,G.jsx)(`div`,{className:`h-6 w-px bg-bambu-dark-tertiary`}),(0,G.jsx)(`div`,{className:`flex items-center gap-2`,children:Tt()}),(0,G.jsx)(`div`,{className:`h-6 w-px bg-bambu-dark-tertiary`}),(0,G.jsx)(`div`,{className:`flex items-center gap-2`,children:Et()})]}),bt&&(0,G.jsxs)(`div`,{className:`ml-auto flex items-center justify-end gap-1`,children:[(0,G.jsx)(uG,{label:e(`printers.toolbar.filters`,`Filters`),icon:(0,G.jsx)(Cc,{className:`w-4 h-4`}),children:(0,G.jsx)(`div`,{className:`flex w-48 flex-col gap-2`,children:wt(!0)})}),(0,G.jsx)(uG,{label:e(`printers.toolbar.view`,`View`),icon:(0,G.jsx)(du,{className:`w-4 h-4`}),children:(0,G.jsx)(`div`,{className:`flex w-48 flex-col gap-2`,children:Tt(!0)})}),(0,G.jsx)(uG,{label:e(`printers.toolbar.actions`,`Actions`),icon:(0,G.jsx)($s,{className:`w-4 h-4`}),children:(0,G.jsx)(`div`,{className:`flex w-48 flex-col gap-2`,children:Et(!0)})})]})]})]}),le?(0,G.jsx)(`div`,{className:`text-center py-12 text-bambu-gray`,children:e(`common.loading`)}):ce?.length===0?(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`text-center py-12`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray mb-4`,children:e(`printers.noPrintersConfigured`)}),(0,G.jsxs)(Q,{onClick:()=>o(!0),disabled:!ie(`printers:create`),title:ie(`printers:create`)?void 0:e(`printers.permission.noAdd`),children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),e(`printers.addPrinter`)]})]})}):ut.length===0&&(P.trim()||I!==`all`||R!==`all`)?(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`text-center py-12`,children:(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`printers.noSearchResults`)})})}):b===`camwall`?(0,G.jsx)(PT,{printers:ut,maxLive:S,snapshotIntervalSec:w,onTileClick:(e,t)=>{ge===`embedded`?H(n=>new Map(n).set(e,{id:e,name:t})):fm(e)},statusMode:E,onChangeMaxLive:e=>{C(e),localStorage.setItem(`camWallMaxLive`,String(e))},onChangeSnapshotIntervalSec:e=>{T(e),localStorage.setItem(`camWallSnapshotSec`,String(e))},onChangeStatusMode:e=>{D(e),localStorage.setItem(`camWallStatusMode`,e)}}):gt?(0,G.jsx)(`div`,{className:`space-y-6`,children:(()=>{let e=p===`status`?fke.filter(e=>gt[e]?.length>0):Object.keys(gt);return h?e:[...e].reverse()})().map(t=>{let n=gt[t],r=`${p}:${t}`,i=!ee[r],a=p===`status`&&pG[t]?.dot||`bg-bambu-green`,o=p===`status`?e(pG[t]?.labelKey||t):t;return(0,G.jsx)(qp,{open:i,onToggle:()=>ht(r),summaryClassName:`py-1`,summary:(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full ${a}`}),o,(0,G.jsxs)(`span`,{className:`text-sm font-normal text-bambu-gray`,children:[`(`,n.length,`)`]}),Xe&&(0,G.jsx)(`button`,{onClick:e=>{e.stopPropagation(),p===`location`?pt(t===`Ungrouped`?``:t):p===`status`?ft(t):p===`model`&&mt(t)},className:`text-xs text-bambu-green hover:text-bambu-green-light transition-colors ml-1`,children:e(`printers.bulk.selectAll`)})]}),children:(0,G.jsx)(`div`,{className:`grid gap-4 ${_>=3?`gap-6`:``} ${ot()}`,children:n.map(e=>(0,G.jsx)(yG,{printer:e,hideIfDisconnected:s,maintenanceInfo:Re[e.id],viewMode:O,cardSize:_,amsThresholds:ue?{humidityGood:Number(ue.ams_humidity_good)||40,humidityFair:Number(ue.ams_humidity_fair)||60,tempGood:Number(ue.ams_temp_good)||28,tempFair:Number(ue.ams_temp_fair)||35}:void 0,spoolmanEnabled:Ce,hasUnlinkedSpools:De,linkedSpools:ke,spoolmanUrl:Se?.url,spoolmanSyncMode:Te,onGetAssignment:Le,onUnassignSpool:(e,t,n)=>je.mutate({printerId:e,amsId:t,trayId:n}),spoolmanSpools:Me,spoolmanSlotAssignments:Pe,spoolmanLoading:Ne||Fe,onUnassignSpoolmanSpool:e=>Ie.mutate(e),timeFormat:ue?.time_format||`system`,cameraViewMode:ge,onOpenEmbeddedCamera:(e,t)=>H(n=>new Map(n).set(e,{id:e,name:t})),onSelectCameraViewMode:_e,checkPrinterFirmware:ue?.check_printer_firmware!==!1,dryingPresets:he,nozzleTempPresets:de,bedTempPresets:fe,chamberTempPresets:pe,fanSpeedPresets:me,requirePlateClear:ue?.require_plate_clear===!0,selectionMode:Xe,isSelected:He.has(e.id),onToggleSelect:Ze,onOpenCompactCard:M,aiDetectionEnabled:xe(e.id),aiDetection:be?.enabled?be.per_printer[String(e.id)]:void 0,aiLastError:be?.last_error??null},e.id))})},t)})}):(0,G.jsx)(`div`,{className:`grid gap-4 ${_>=3?`gap-6`:``} ${ot()}`,children:ut.map(e=>(0,G.jsx)(yG,{printer:e,hideIfDisconnected:s,maintenanceInfo:Re[e.id],viewMode:O,cardSize:_,spoolmanEnabled:Ce,hasUnlinkedSpools:De,linkedSpools:ke,spoolmanUrl:Se?.url,spoolmanSyncMode:Te,onGetAssignment:Le,onUnassignSpool:(e,t,n)=>je.mutate({printerId:e,amsId:t,trayId:n}),spoolmanSpools:Me,spoolmanSlotAssignments:Pe,spoolmanLoading:Ne||Fe,onUnassignSpoolmanSpool:e=>Ie.mutate(e),amsThresholds:ue?{humidityGood:Number(ue.ams_humidity_good)||40,humidityFair:Number(ue.ams_humidity_fair)||60,tempGood:Number(ue.ams_temp_good)||28,tempFair:Number(ue.ams_temp_fair)||35}:void 0,timeFormat:ue?.time_format||`system`,cameraViewMode:ge,onOpenEmbeddedCamera:(e,t)=>H(n=>new Map(n).set(e,{id:e,name:t})),onSelectCameraViewMode:_e,checkPrinterFirmware:ue?.check_printer_firmware!==!1,dryingPresets:he,nozzleTempPresets:de,bedTempPresets:fe,chamberTempPresets:pe,fanSpeedPresets:me,requirePlateClear:ue?.require_plate_clear===!0,selectionMode:Xe,isSelected:He.has(e.id),onToggleSelect:Ze,onOpenCompactCard:M,aiDetectionEnabled:xe(e.id),aiDetection:be?.enabled?be.per_printer[String(e.id)]:void 0,aiLastError:be?.last_error??null},e.id))}),_===2&&k!=null&&(0,G.jsxs)(`button`,{type:`button`,onClick:N,className:`fixed bottom-5 left-1/2 z-40 inline-flex -translate-x-1/2 items-center gap-2 rounded-full border px-4 py-2 text-sm font-medium shadow-xl transition-colors ${i}`,title:e(`common.back`,`Back`),children:[(0,G.jsx)(Lo,{className:`w-4 h-4`}),e(`common.back`,`Back`)]}),a&&(0,G.jsx)(vke,{onClose:()=>o(!1),onAdd:e=>Be.mutate(e),existingSerials:ce?.map(e=>e.serial_number)||[]}),Xe&&ce&&(0,G.jsx)(Gee,{selectedIds:He,printers:ce,onClose:Qe,onSelectAll:dt,onSelectByLocation:pt,onSelectByState:ft,onAction:et,actionPending:Je}),Ke===`stop`&&(0,G.jsx)(rf,{title:e(`printers.bulk.confirm.stopTitle`,{count:He.size}),message:e(`printers.bulk.confirm.stopMessage`,{count:He.size}),confirmText:e(`printers.bulk.confirm.stopButton`),variant:`danger`,isLoading:Je,onConfirm:()=>$e(`stop`),onCancel:()=>qe(null)}),Ke===`pause`&&(0,G.jsx)(rf,{title:e(`printers.bulk.confirm.pauseTitle`,{count:He.size}),message:e(`printers.bulk.confirm.pauseMessage`,{count:He.size}),confirmText:e(`printers.bulk.confirm.pauseButton`),isLoading:Je,onConfirm:()=>$e(`pause`),onCancel:()=>qe(null)}),Ke===`clearPlate`&&(0,G.jsx)(rf,{title:e(`printers.bulk.confirm.clearPlateTitle`,{count:He.size}),message:e(`printers.bulk.confirm.clearPlateMessage`,{count:He.size}),confirmText:e(`printers.bulk.confirm.clearPlateButton`),isLoading:Je,onConfirm:()=>$e(`clearPlate`),onCancel:()=>qe(null)}),Array.from(se.values()).map((e,t)=>(0,G.jsx)(Use,{printerId:e.id,printerName:e.name,viewerIndex:t,onClose:()=>H(t=>{let n=new Map(t);return n.delete(e.id),n})},e.id))]})}function wke({title:e,message:t,subtitle:n,closeText:r,variant:i=`error`,onClose:a}){let{t:o}=U(),s=r??o(`common.close`);return(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&a()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[a]),(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center p-4 z-[120]`,onClick:a,children:(0,G.jsx)(Ld,{className:`w-full max-w-md`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(zd,{className:`p-6`,children:[(0,G.jsxs)(`div`,{className:`flex items-start gap-4`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-full bg-bambu-dark ${i===`warning`?`text-yellow-600 dark:text-yellow-400`:`text-red-600 dark:text-red-400`}`,children:(0,G.jsx)(Iu,{className:`w-6 h-6`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white mb-1`,children:e}),n&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2 truncate`,children:n}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm whitespace-pre-line break-words`,children:t})]})]}),(0,G.jsx)(`div`,{className:`flex mt-6`,children:(0,G.jsx)(Q,{onClick:a,className:`flex-1`,children:s})})]})})})}var bG=(0,y.createContext)(null),Tke=1500,Eke=1e3,xG=e=>`slice-job-${e}`;function SG(e){try{return decodeURIComponent(e)}catch{return e}}function Dke(e){let t=Math.max(0,Math.floor(e));if(t<60)return`${t}s`;let n=Math.floor(t/60),r=t%60;return n<60?`${n}m ${r}s`:`${Math.floor(n/60)}h ${n%60}m`}function Oke({children:e}){let{t}=U(),{showToast:n,showPersistentToast:r,dismissToast:i}=Gd(),a=co(),[o,s]=(0,y.useState)([]),[c,l]=(0,y.useState)(null),u=(0,y.useRef)([]);u.current=o;let d=(0,y.useRef)(new Map),f=(0,y.useRef)(new Map),p=(0,y.useRef)(new Map),m=(0,y.useRef)(new Set),h=(0,y.useCallback)(e=>{let n=d.current.get(e.id);if(n==null)return;let i=(Date.now()-n)/1e3,a=f.current.get(e.id)??`pending`,o=Dke(i),s=p.current.get(e.id)??null,c=s&&s.stage&&s.total_percent>0;if(a===`running`&&c){let n=SG(e.sourceName),i=s.stage,a=Math.min(100,Math.max(0,Math.round(s.total_percent))),c=typeof s.multi_plate_index==`number`&&typeof s.multi_plate_count==`number`&&s.multi_plate_count>1?t(`slice.runningWithProgressMultiPlate`,`Plate {{plateIndex}} of {{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,{plateIndex:s.multi_plate_index,plateCount:s.multi_plate_count,name:n,stage:i,percent:a,elapsed:o}):t(`slice.runningWithProgress`,`{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,{name:n,stage:i,percent:a,elapsed:o});r(xG(e.id),c,`loading`);return}let l=a===`pending`?`slice.queuedToast`:`slice.runningToast`,u=a===`pending`?`Queued: {{name}} — {{elapsed}}`:`Slicing {{name}} — {{elapsed}}`;r(xG(e.id),t(l,u,{name:SG(e.sourceName),elapsed:o}),`loading`)},[r,t]),g=(0,y.useCallback)((e,t,n)=>{s(r=>r.some(t=>t.id===e)?r:[...r,{id:e,kind:t,sourceName:n}]),m.current.delete(e),d.current.set(e,Date.now()),f.current.set(e,`pending`),p.current.set(e,null),h({id:e,kind:t,sourceName:n})},[h]),_=(0,y.useCallback)((e,r)=>{m.current.has(e.id)||(m.current.add(e.id),s(t=>t.filter(t=>t.id!==e.id)),d.current.delete(e.id),f.current.delete(e.id),p.current.delete(e.id),i(xG(e.id)),r.status===`completed`?(n(t(`slice.completedToast`,`Sliced {{name}}`,{name:SG(e.sourceName)}),`success`),r.result&&`external_write_fallback`in r.result&&r.result.external_write_fallback&&n(t(`slice.externalWriteFallbackToast`,`Saved to the internal library: the external folder could not be written to`),`warning`)):r.status===`failed`&&l({name:SG(e.sourceName),detail:r.error_detail||t(`slice.failed`)}),a.invalidateQueries({queryKey:[`library-files`]}),a.invalidateQueries({queryKey:[`archives`]}))},[i,a,n,t]);return(0,y.useEffect)(()=>{if(o.length===0)return;let e=!1,t=!1,n=setInterval(async()=>{if(!(e||t)){t=!0;try{let t=[...u.current];for(let n of t)try{let t=await Z.getSliceJob(n.id);if(e)return;f.current.set(n.id,t.status),t.progress&&p.current.set(n.id,t.progress),(t.status===`completed`||t.status===`failed`)&&_(n,t)}catch{}}finally{t=!1}}},Tke);return()=>{e=!0,clearInterval(n)}},[o.length,_]),(0,y.useEffect)(()=>{if(o.length===0)return;let e=setInterval(()=>{for(let e of u.current)h(e)},Eke);return()=>clearInterval(e)},[o.length,h]),(0,G.jsxs)(bG.Provider,{value:{trackJob:g,activeJobs:o},children:[e,c&&(0,G.jsx)(wke,{title:t(`slice.failedTitle`),subtitle:c.name,message:c.detail,onClose:()=>l(null)})]})}function CG(){let e=(0,y.useContext)(bG);if(!e)throw Error(`useSliceJobTracker must be used inside SliceJobTrackerProvider`);return e}var wG=1024;function kke(){let[e,t]=(0,y.useState)(()=>typeof window<`u`?window.innerWidth>=wG:!1);return(0,y.useEffect)(()=>{let e=window.matchMedia(`(min-width: ${wG}px)`),n=e=>{t(e.matches)};return t(e.matches),e.addEventListener(`change`,n),()=>e.removeEventListener(`change`,n)},[]),e}function TG({plates:e,onSelect:t,onClose:n}){let{t:r}=U();return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/60 p-4`,onClick:n,children:(0,G.jsxs)(`div`,{className:`w-full max-w-3xl max-h-[85vh] flex flex-col rounded-lg bg-bambu-dark-secondary border border-bambu-dark-tertiary/60`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex-shrink-0 flex items-start justify-between gap-3 px-4 pt-4 pb-3 border-b border-bambu-dark-tertiary/40`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`h3`,{className:`text-white font-medium`,children:r(`archives.platePicker.title`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:r(`archives.platePicker.hint`)})]}),(0,G.jsx)(`button`,{onClick:n,className:`flex-shrink-0 text-bambu-gray hover:text-white transition-colors`,"aria-label":r(`common.close`,`Close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto p-4`,children:(0,G.jsx)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 gap-2`,children:e.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>t(e.index),className:`flex items-center gap-2 p-2 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark hover:border-bambu-gray transition-colors text-left`,children:[e.has_thumbnail&&e.thumbnail_url!=null?(0,G.jsx)(`img`,{src:_d(e.thumbnail_url),alt:`Plate ${e.index}`,className:`w-12 h-12 rounded object-cover bg-bambu-dark-tertiary flex-shrink-0`}):(0,G.jsx)(`div`,{className:`w-12 h-12 rounded bg-bambu-dark-tertiary flex items-center justify-center flex-shrink-0`,children:(0,G.jsx)(qc,{className:`w-5 h-5 text-bambu-gray`})}),(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white font-medium truncate`,children:e.name?`${r(`archives.platePicker.plateLabel`,{index:e.index})} — ${e.name}`:r(`archives.platePicker.plateLabel`,{index:e.index})}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray truncate`,children:[e.objects.length>0?e.objects.slice(0,3).join(`, `)+(e.objects.length>3?`…`:``):e.object_count!=null&&e.object_count>0?r(`archives.platePicker.objectCount`,{count:e.object_count}):`${e.filaments.length} filament${e.filaments.length===1?``:`s`}`,e.print_time_seconds==null?``:` • ${op(e.print_time_seconds)}`]})]})]},e.index))})})]})})}var EG=e=>typeof e==`object`&&!!e&&`enumKey`in e,DG=`enum:`;function OG(e){if(typeof e==`number`)return e;if(typeof e==`boolean`)return+!!e;if(typeof e!=`string`)return;let t=Number.parseFloat(e);return Number.isFinite(t)?t:void 0}function kG(e){if(typeof e==`boolean`)return e;if(typeof e==`number`)return e!==0;if(e===`1`||e===`true`)return!0;if(e===`0`||e===`false`)return!1}function Ake(e,t){return{get:n=>{let r=e[n];if((r===void 0||r===``)&&(r=t[n]?.default),Array.isArray(r)&&(r=r[0]),typeof r==`boolean`||typeof r==`number`||typeof r==`string`)return r},has:e=>e in t}}var jke=[`->`,`||`,`&&`,`==`,`!=`,`<=`,`>=`,`(`,`)`,`,`,`<`,`>`,`!`];function Mke(e){let t=[],n=0;for(;n<e.length;){let r=e[n];if(r===` `||r===`	`||r===`
-`){n+=1;continue}if(r===`"`){let r=e.indexOf(`"`,n+1);if(r<0)return;t.push({kind:`str`,value:e.slice(n+1,r)}),n=r+1;continue}let i=/^\d+(\.\d*)?f?/.exec(e.slice(n));if(i&&/^[\d]/.test(r)){t.push({kind:`num`,value:Number.parseFloat(i[0])}),n+=i[0].length;continue}let a=jke.find(t=>e.startsWith(t,n));if(a){t.push({kind:`op`,value:a}),n+=a.length;continue}let o=/^[A-Za-z_][A-Za-z0-9_]*(::[A-Za-z_][A-Za-z0-9_]*)*/.exec(e.slice(n));if(o){t.push({kind:`id`,value:o[0]}),n+=o[0].length;continue}return}return t}var Nke=new Set([`opt_bool`,`opt_int`,`opt_float`,`opt_float_nullable`,`opt_int_nullable`,`opt_bool_nullable`,`opt_enum`,`opt_string`,`option`,`has`]),Pke=class e{tokens=[];pos=0;cfg;locals;schema;resolving;memo;constructor(e,t,n,r,i){this.cfg=e,this.locals=t,this.schema=n,this.resolving=r,this.memo=i}evaluate(e){let t=Mke(e);if(!t||t.length===0)return;this.tokens=t,this.pos=0;let n=this.parseOr();if(this.pos===this.tokens.length)return n}peek(){return this.tokens[this.pos]}eatOp(e){let t=this.peek();return t&&t.kind===`op`&&t.value===e?(this.pos+=1,!0):!1}parseOr(){let e=this.parseAnd();for(;this.eatOp(`||`);){let t=this.parseAnd(),n=kG(e),r=kG(t);e=n===!0||r===!0?!0:n===void 0||r===void 0?void 0:n||r}return e}parseAnd(){let e=this.parseComparison();for(;this.eatOp(`&&`);){let t=this.parseComparison(),n=kG(e),r=kG(t);e=n===!1||r===!1?!1:n===void 0||r===void 0?void 0:n&&r}return e}parseComparison(){let e=this.parseUnary();for(let t of[`==`,`!=`,`<=`,`>=`,`<`,`>`])if(this.eatOp(t))return Fke(e,this.parseUnary(),t,this.schema);return e}parseUnary(){if(this.eatOp(`!`)){let e=kG(this.parseUnary());return e===void 0?void 0:!e}return this.parsePrimary()}parsePrimary(){let e=this.peek();if(!e)return;if(e.kind===`num`||e.kind===`str`)return this.pos+=1,e.value;if(e.kind===`op`&&e.value===`(`){this.pos+=1;let e=this.parseOr();return this.eatOp(`)`)?e:void 0}if(e.kind!==`id`)return;if(this.pos+=1,e.value===`true`)return!0;if(e.value===`false`)return!1;if(e.value===`config`)return this.parseConfigAccess();let t=this.locals[e.value];return t===void 0?`${DG}${e.value}`:this.resolveLocal(e.value,t)}parseConfigAccess(){if(!this.eatOp(`->`))return;let e=this.peek();if(!e||e.kind!==`id`||!Nke.has(e.value))return;if(this.pos+=1,this.eatOp(`<`)){let e=1;for(;e>0;){let t=this.peek();if(!t)return;this.pos+=1,t.kind===`op`&&t.value===`<`&&(e+=1),t.kind===`op`&&t.value===`>`&&--e}}if(!this.eatOp(`(`))return;let t=this.peek();if(!t||t.kind!==`str`)return;this.pos+=1;let n=t.value;for(;this.eatOp(`,`);){let e=0;for(;;){let t=this.peek();if(!t)return;if(t.kind===`op`&&t.value===`(`&&(e+=1),t.kind===`op`&&t.value===`)`){if(e===0)break;--e}if(t.kind===`op`&&t.value===`,`&&e===0)break;this.pos+=1}}if(!this.eatOp(`)`))return;if(this.eatOp(`->`)){let e=this.peek();if(!e||e.kind!==`id`)return;this.pos+=1}if(e.value===`has`)return this.cfg.has(n);let r=this.cfg.get(n);return this.schema[n]?.enum_values?{enumKey:n,value:typeof r==`string`?r:void 0}:r}resolveLocal(t,n){let r=this.memo.get(t);if(r!==void 0||this.memo.has(t))return r;if(this.resolving.has(t))return;this.resolving.add(t);let i=new e(this.cfg,this.locals,this.schema,this.resolving,this.memo).evaluate(n);return this.resolving.delete(t),this.memo.set(t,i),i}};function Fke(e,t,n,r){let i=typeof e==`string`&&e.startsWith(DG)?e:typeof t==`string`&&t.startsWith(DG)?t:void 0;if(i!==void 0){if(n!==`==`&&n!==`!=`)return;let a=i===e?t:e;if(!EG(a))return;let o=r[a.enumKey]?.enum_values;if(!o||a.value===void 0)return;let s=Ike(i.slice(5)).filter(e=>o.includes(e));if(s.length!==1)return;let c=s[0]===a.value;return n===`==`?c:!c}let a=EG(e)?e.value:e,o=EG(t)?t.value:t;if(n===`==`||n===`!=`){if(a===void 0||o===void 0)return;let e=typeof a==`string`||typeof o==`string`?String(a)===String(o):OG(a)===OG(o);return n===`==`?e:!e}let s=OG(a),c=OG(o);if(!(s===void 0||c===void 0)){if(n===`<`)return s<c;if(n===`<=`)return s<=c;if(n===`>`)return s>c;if(n===`>=`)return s>=c}}function Ike(e){let t=e.includes(`::`)?e.slice(e.lastIndexOf(`::`)+2):e,n=[t,/^[a-z]+([A-Z].*)$/.exec(t)?.[1]].filter(e=>!!e),r=new Set;for(let e of n){let t=e.replace(/([a-z0-9])([A-Z])/g,`$1_$2`).toLowerCase();r.add(t),r.add(t.replace(/_/g,` `)),r.add(t.replace(/_/g,``))}return[...r]}function Lke(e,t,n){let r=Ake(e,t),i=new Map,a=new Set;for(let e of n.rules){let o=Rke(e.enable_if);if(o&&kG(new Pke(r,n.locals,t,new Set,i).evaluate(o))===!1)for(let t of e.fields)a.add(t)}return a}function Rke(e){let t=0;for(let n=0;n<e.length;n+=1){let r=e[n];if(r===`(`)t+=1;else if(r===`)`)--t;else if(r===`,`&&t===0)return e.slice(0,n).trim()||void 0}return e.trim()||void 0}var zke=new Set([`coBools`,`coFloats`,`coFloatsOrPercents`]),Bke=e=>zke.has(e.type);function AG(e){if(typeof e==`number`)return Number.isFinite(e)?e:void 0;if(typeof e!=`string`)return;let t=Number.parseFloat(e);return Number.isFinite(t)?t:void 0}function Vke(e){let t=e.sidetext;if(!(!t||t.includes(`->`)||t.includes(`::`)))return t}function jG(e,t){let n=t===void 0?e.default:t;return n===void 0?``:Array.isArray(n)?n.map(String).join(`, `):typeof n==`boolean`?n?`1`:`0`:String(n)}function MG(e,t){if(Bke(e))return(Array.isArray(t)?t.map(String):String(t).split(`,`)).map(e=>e.trim()).filter(e=>e!==``);if(e.type===`coBool`)return typeof t==`boolean`?t?`1`:`0`:t===`1`||t===`true`||t===1?`1`:`0`;let n=String(t).trim();return e.type===`coPercent`?n.endsWith(`%`)?n:`${n}%`:n}function Hke(e,t){let n={};for(let[r,i]of Object.entries(e)){let e=t[r];e&&(n[r]=MG(e,i))}return n}function NG(e,t,n){if(t===void 0||t===``)return!1;let r=t=>{let n=MG(e,Array.isArray(t)?t.map(String).join(`, `):t);return Array.isArray(n)?n.join(`, `):n},i=r(t),a=n===void 0?e.default:n;return a===void 0?i!==``:i!==r(a)}var Uke=new Set([`support_filament`,`support_interface_filament`,`outer_wall_filament_id`,`inner_wall_filament_id`,`top_surface_filament_id`,`bottom_surface_filament_id`,`internal_solid_filament_id`,`sparse_infill_filament_id`]),Wke=[`simple`,`advanced`,`expert`],PG={simple:0,advanced:1,expert:2,develop:3};function Gke({values:e,onChange:t,disabled:n=!1,sourceOverrides:r=[],sourceSelected:i,onToggleSource:a,filamentChoices:o,presetValues:s,presetValuesResolved:c=!0,presetValuesReason:l}){let{t:u}=U(),[d,f]=(0,y.useState)(null),[p,m]=(0,y.useState)(`simple`),[h,g]=(0,y.useState)(null),[_,v]=(0,y.useState)(``);(0,y.useEffect)(()=>{let e=!1;return Promise.all([Pt(()=>import(`./process-schema-CzfeynAH.js`),[]),Pt(()=>import(`./process-ui-tree-BWrKRLV6.js`),[]),Pt(()=>import(`./process-toggle-rules-DDBax3G5.js`),[])]).then(([t,n,r])=>{e||f({schema:t.default??t,tree:n.default??n,toggles:r.default??r})}),()=>{e=!0}},[]);let b=(0,y.useMemo)(()=>{let t={...s??{}};for(let e of r)i?.has(e.key)&&(t[e.key]=e.value);for(let[n,r]of Object.entries(e))r!==void 0&&r!==``&&(t[n]=r);return t},[s,r,i,e]),x=(0,y.useMemo)(()=>d?Lke(b,d.schema,d.toggles):new Set,[d,b]),S=(0,y.useMemo)(()=>new Map(r.map(e=>[e.key,e])),[r]),C=(0,y.useMemo)(()=>r.filter(e=>!e.printer_coupled&&!e.preset_defining),[r]),w=(0,y.useMemo)(()=>r.filter(e=>i?.has(e.key)).length,[r,i]),T=(0,y.useMemo)(()=>d?r.filter(e=>!d.schema[e.key]):[],[d,r]),E=e=>{if(!d)return;let n={};for(let[t,r]of Object.entries(e))d.schema[t]&&NG(d.schema[t],r,s?.[t])&&(n[t]=r);t(e,Hke(n,d.schema))},D=(t,n)=>{let r={...e};n===void 0?delete r[t]:r[t]=n,E(r)},O=(0,y.useMemo)(()=>{if(!d)return[];let e=e=>e.toLowerCase().replace(/[_\s]+/g,` `).trim(),t=e(_),n=e=>PG[d.schema[e]?.mode??`expert`]<=PG[p],r=(n,r,i)=>{if(!t)return!0;let a=d.schema[n];return[n,a?.label??``,a?.tooltip??``,r,i].some(n=>e(n).includes(t))};return d.tree.map(e=>({...e,groups:e.groups.map(t=>({...t,options:t.options.filter(i=>n(i)&&r(i,t.group,e.page))})).filter(e=>e.options.length>0)})).filter(e=>e.groups.length>0)},[d,p,_]),k=(0,y.useMemo)(()=>O.length===0||_.trim()?null:O.find(e=>e.page===h)??O[0],[O,h,_]),A=(0,y.useMemo)(()=>d?Object.keys(e).filter(t=>d.schema[t]&&NG(d.schema[t],e[t],s?.[t])).length:0,[d,e,s]);if(!d)return(0,G.jsxs)(`div`,{className:`flex items-center justify-center gap-2 py-8 text-sm text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),u(`slicerSettings.loading`,`Loading slicer settings...`)]});let j=k?[k]:O;return(0,G.jsxs)(`div`,{className:`flex flex-col gap-3`,children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2`,children:[(0,G.jsx)(`div`,{className:`flex overflow-hidden rounded border border-bambu-dark-tertiary`,children:Wke.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>m(e),disabled:n,className:`px-2.5 py-1 text-xs capitalize transition-colors ${p===e?`bg-bambu-green text-white`:`text-bambu-gray hover:text-white`}`,children:u(`slicerSettings.mode.${e}`,e)},e))}),(0,G.jsxs)(`div`,{className:`relative flex-1 min-w-[10rem]`,children:[(0,G.jsx)(Zl,{className:`absolute left-2 top-1/2 -translate-y-1/2 w-3.5 h-3.5 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`search`,value:_,onChange:e=>v(e.target.value),disabled:n,placeholder:u(`slicerSettings.searchPlaceholder`,`Search settings`),className:`w-full rounded border border-bambu-dark-tertiary bg-bambu-dark pl-7 pr-2 py-1 text-xs text-white placeholder:text-bambu-gray/60 focus:border-bambu-green focus:outline-none disabled:opacity-40`})]}),A>0&&(0,G.jsxs)(`button`,{type:`button`,onClick:()=>E({}),disabled:n,className:`flex items-center gap-1 text-xs text-bambu-gray hover:text-white`,children:[(0,G.jsx)(Ul,{className:`w-3 h-3`}),u(`slicerSettings.resetAll`,`Reset {{count}}`,{count:A})]})]}),!c&&(0,G.jsx)(`p`,{className:`rounded border border-amber-300 bg-amber-50 px-2 py-1 text-[0.7rem] text-amber-800 dark:border-amber-700/40 dark:bg-amber-900/20 dark:text-amber-200`,children:l===`sidecar_outdated`?u(`slicerSettings.presetValuesOutdatedSidecar`,`Showing slicer defaults: your slicer sidecar is older than this feature and can't report a preset's values. Update the sidecar image to see them. Anything you don't change still uses the preset.`):l===`not_configured`?u(`slicerSettings.presetValuesNotConfigured`,`Showing slicer defaults: no slicer sidecar is configured, so a preset's values can't be read. Anything you don't change still uses the preset.`):l===`sidecar_unavailable`?u(`slicerSettings.presetValuesSidecarUnavailable`,`Showing slicer defaults: the slicer sidecar did not answer, so a preset's values can't be read. Anything you don't change still uses the preset.`):u(`slicerSettings.presetValuesUnavailable`,`Showing slicer defaults: the picked preset's own values could not be read. Anything you don't change still uses the preset.`)}),r.length>0&&a&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 rounded border border-bambu-dark-tertiary px-2 py-1.5 text-[0.7rem] text-bambu-gray`,children:[(0,G.jsx)(`span`,{className:`min-w-0 flex-1`,children:u(`slicerSettings.fromFileSummary`,`The designer changed {{count}} process settings in this file. Only the ones you tick are used.`,{count:r.length})}),(0,G.jsx)(`button`,{type:`button`,disabled:n,onClick:()=>C.forEach(e=>a(e.key,!0)),title:u(`slicerSettings.fromFileUseAllHint`,`Ticks the settings that carry across printers. The ones tuned for the designer's own printer, and the ones that define the preset you picked, stay off.`),className:`shrink-0 rounded border border-bambu-dark-tertiary px-1.5 py-0.5 hover:text-white disabled:opacity-40`,children:u(`slicerSettings.fromFileUseAll`,`Use the designer's settings`)}),w>0&&(0,G.jsx)(`button`,{type:`button`,disabled:n,onClick:()=>r.forEach(e=>a(e.key,!1)),className:`shrink-0 rounded border border-bambu-dark-tertiary px-1.5 py-0.5 hover:text-white disabled:opacity-40`,children:u(`slicerSettings.fromFileClear`,`Clear {{count}}`,{count:w})})]}),!_.trim()&&(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1`,children:O.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>g(e.page),disabled:n,className:`px-2 py-1 text-xs rounded transition-colors ${k?.page===e.page?`bg-bambu-dark-tertiary text-white`:`text-bambu-gray hover:text-white`}`,children:e.page},e.page))}),j.length===0?(0,G.jsx)(`p`,{className:`py-6 text-center text-xs text-bambu-gray`,children:u(`slicerSettings.noMatches`,`No settings match this search.`)}):(0,G.jsxs)(`div`,{className:`flex flex-col gap-4 max-h-[22rem] lg:max-h-[58vh] overflow-y-auto pr-1`,children:[j.map(t=>(0,G.jsxs)(`div`,{className:`flex flex-col gap-3`,children:[_.trim()&&(0,G.jsx)(`p`,{className:`text-[0.7rem] uppercase tracking-wide text-bambu-gray/70`,children:t.page}),t.groups.map(r=>(0,G.jsxs)(`fieldset`,{className:`flex flex-col gap-1.5`,children:[(0,G.jsx)(`legend`,{className:`mb-1 text-xs font-medium text-white`,children:r.group}),r.options.map(t=>(0,G.jsx)(Kke,{optionKey:t,option:d.schema[t],value:e[t],onChange:e=>D(t,e),disabled:n||x.has(t),disabledBySlicer:x.has(t),formDisabled:n,source:S.get(t),sourceOn:i?.has(t)??!1,onToggleSource:a,filamentChoices:Uke.has(t)?o:void 0,presetValue:s?.[t]},t))]},`${t.page}:${r.group}`))]},t.page)),T.length>0&&!_.trim()&&(0,G.jsxs)(`fieldset`,{className:`flex flex-col gap-1.5`,children:[(0,G.jsx)(`legend`,{className:`mb-1 text-xs font-medium text-white`,children:u(`slicerSettings.otherFromFile`,`Other settings from this file`)}),T.map(e=>(0,G.jsxs)(`label`,{className:`flex items-center gap-2 text-xs cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:i?.has(e.key)??!1,disabled:n||!a,onChange:t=>a?.(e.key,t.target.checked),className:`shrink-0 cursor-pointer disabled:opacity-40`}),(0,G.jsxs)(`span`,{className:`min-w-0 flex-1 truncate`,children:[(0,G.jsx)(`span`,{className:`font-mono text-bambu-gray`,children:e.key}),(0,G.jsx)(`span`,{className:`ml-1.5 text-white`,children:FG(e.value)})]}),(e.printer_coupled||e.preset_defining)&&(0,G.jsx)(`span`,{className:`shrink-0 rounded bg-amber-100 px-1 py-0.5 text-[10px] text-amber-700 dark:bg-amber-500/20 dark:text-amber-400`,children:e.printer_coupled?u(`slicerSettings.fromFilePrinterCoupled`,`designer's printer`):u(`slicerSettings.fromFileOverridesPreset`,`overrides preset`)})]},e.key))]})]})]})}function Kke({optionKey:e,option:t,value:n,onChange:r,disabled:i,disabledBySlicer:a,formDisabled:o,source:s,sourceOn:c=!1,onToggleSource:l,filamentChoices:u,presetValue:d}){let{t:f}=U(),p=NG(t,n,d),m=Vke(t),h=n===void 0?c&&s?FG(s.value):jG(t,d):String(n);return(0,G.jsxs)(`div`,{className:`flex items-center gap-2 group`,title:t.tooltip,children:[(0,G.jsxs)(`label`,{htmlFor:`slicer-opt-${e}`,className:`flex min-w-0 flex-1 items-center gap-1 text-xs ${a?`text-bambu-gray/40`:`text-bambu-gray`}`,children:[(0,G.jsx)(`span`,{className:`truncate`,title:t.label||e,children:t.label||e}),p&&(0,G.jsx)(`span`,{className:`shrink-0 text-bambu-green`,"aria-hidden":`true`,children:`•`}),s&&(0,G.jsx)(`span`,{className:`shrink-0 rounded px-1 py-0.5 text-[10px] ${s.printer_coupled||s.preset_defining?`bg-amber-100 text-amber-700 dark:bg-amber-500/20 dark:text-amber-400`:`bg-bambu-green/15 text-bambu-green`}`,title:s.printer_coupled?f(`slicerSettings.fromFilePrinterCoupledHint`,`Tuned for the printer this file was designed for -- may be wrong or out of range on yours.`):s.preset_defining?f(`slicerSettings.fromFileOverridesPresetHint`,`The file sets this to {{value}} where the preset you picked uses {{preset}}. Tick it only if the file should win.`,{value:FG(s.value),preset:jG(t,d)}):f(`slicerSettings.fromFileHint`,`The designer changed this in the source file. Its value is {{value}}.`,{value:FG(s.value)}),children:s.printer_coupled?f(`slicerSettings.fromFilePrinterCoupled`,`designer's printer`):s.preset_defining?f(`slicerSettings.fromFileOverridesPreset`,`overrides preset`):f(`slicerSettings.fromFile`,`from file`)})]}),(0,G.jsxs)(`div`,{className:`flex shrink-0 items-center gap-1.5`,children:[(0,G.jsx)(`span`,{className:`flex w-3 shrink-0 justify-center`,children:s&&l&&(0,G.jsx)(`input`,{type:`checkbox`,checked:c,disabled:o,onChange:t=>l(e,t.target.checked),"aria-label":f(`slicerSettings.useFromFile`,`Use the source file's value for {{option}}`,{option:t.label||e}),title:f(`slicerSettings.useFromFile`,`Use the source file's value for {{option}}`,{option:t.label||e}),className:`w-3 h-3 cursor-pointer disabled:opacity-40`})}),(0,G.jsx)(`div`,{className:`w-40`,children:(0,G.jsx)(qke,{id:`slicer-opt-${e}`,option:t,current:h,onChange:r,disabled:i,filamentChoices:u})}),(0,G.jsx)(`span`,{className:`w-16 shrink-0 whitespace-nowrap text-[0.65rem] text-bambu-gray/60`,children:m??``}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>r(void 0),disabled:i||!p,"aria-label":f(`slicerSettings.resetOption`,`Reset to default`),className:`p-0.5 transition-opacity ${p?`text-bambu-gray hover:text-white`:`opacity-0 pointer-events-none`}`,children:(0,G.jsx)(Ul,{className:`w-3 h-3`})})]})]})}function FG(e){return Array.isArray(e)?e.map(e=>String(e)).join(`, `):e==null?``:String(e)}function qke({id:e,option:t,current:n,onChange:r,disabled:i,filamentChoices:a}){let{t:o}=U(),s=`w-full rounded border border-bambu-dark-tertiary bg-bambu-dark px-1.5 py-0.5 text-xs text-white focus:border-bambu-green focus:outline-none disabled:opacity-40`;if(a&&a.length>0){let t=a.find(e=>String(e.index)===n);return(0,G.jsxs)(`div`,{className:`relative w-full`,children:[(0,G.jsxs)(`select`,{id:e,value:n,onChange:e=>r(e.target.value),disabled:i,className:`${s} w-full cursor-pointer appearance-none pr-5`,title:t?.label,children:[(0,G.jsx)(`option`,{value:`0`,children:o(`slicerSettings.filamentDefault`,`Default`)}),a.map(e=>(0,G.jsxs)(`option`,{value:String(e.index),children:[e.index,`: `,e.label]},e.index))]}),(0,G.jsx)(ps,{className:`pointer-events-none absolute right-1.5 top-1/2 h-3 w-3 -translate-y-1/2 text-bambu-gray`})]})}return t.type===`coBool`?(0,G.jsx)(`input`,{id:e,type:`checkbox`,checked:n===`1`||n===`true`,onChange:e=>r(e.target.checked),disabled:i,className:`w-3.5 h-3.5 cursor-pointer disabled:opacity-40`}):t.type===`coEnum`&&t.enum_values?(0,G.jsxs)(`div`,{className:`relative w-full`,children:[(0,G.jsx)(`select`,{id:e,value:n,onChange:e=>r(e.target.value),disabled:i,className:`${s} w-full cursor-pointer appearance-none pr-5`,children:t.enum_values.map((e,n)=>(0,G.jsx)(`option`,{value:e,children:t.enum_labels?.[n]??e},e))}),(0,G.jsx)(ps,{className:`pointer-events-none absolute right-1.5 top-1/2 h-3 w-3 -translate-y-1/2 text-bambu-gray`})]}):t.type===`coInt`||t.type===`coFloat`||t.type===`coPercent`?(0,G.jsx)(`input`,{id:e,type:`number`,value:n.replace(`%`,``),min:AG(t.min),max:AG(t.max),step:t.type===`coInt`?1:`any`,onChange:e=>r(e.target.value),disabled:i,className:s}):(0,G.jsx)(`input`,{id:e,type:`text`,value:n,onChange:e=>r(e.target.value),disabled:i,className:s})}var IG=[`local`,`orca_cloud`,`cloud`,`standard`],Jke={local:1.75,orca_cloud:1.5,cloud:1,standard:.5};function LG(e,t){for(let n of IG){let r=e[n][t];if(r.length>0)return{source:r[0].source,id:r[0].id}}return null}function RG(e,t,n){return t?e[t.source][n].find(e=>e.id===t.id)??null:null}function zG(e,t,n){if(!n)return null;for(let r of IG){let i=e[r][t].find(e=>e.name===n);if(i)return{source:i.source,id:i.id}}return null}function Yke(e,t,n,r){let i=zG(e,`process`,r);if(i){let r=RG(e,i,`process`);if(r&&LU(r,`process`,t,n)!==`mismatch`)return i}for(let r of[`match`,`unknown`])for(let i of IG){let a=Qke(e[i].process.filter(e=>LU(e,`process`,t,n)===r));if(a)return{source:a.source,id:a.id}}return LG(e,`process`)}var Xke=.2,Zke=/^\s*([\d.]+)\s*mm\b/i;function Qke(e){let t=null,n=1/0,r=-1/0;for(let i of e){let e=Zke.exec(i.name),a=e?Number.parseFloat(e[1]):NaN,o=Number.isFinite(a)&&a>0,s=o?Math.abs(a-Xke):1/0;(t==null||s<n||s===n&&o&&a>r)&&(t=i,n=s,r=o?a:-1/0)}return t}function BG(e,t){let n=t.trim().toUpperCase(),r=(e.filament_type??``).trim().toUpperCase();return!!n&&!!r&&n!==r}function $ke(e,t,n,r){let i=t.type.trim().toUpperCase(),a=fp(t.color),o=null,s=null,c=null;for(let l of IG)for(let u of e[l].filament){let e=0,d=(u.filament_type??``).trim().toUpperCase(),f=fp(u.filament_colour??``);i&&d&&i===d&&(e+=10),a&&f&&(f===a?e+=5:xp(u.filament_colour??``,t.color)&&(e+=2)),e+=Jke[l];let p={source:u.source,id:u.id};BG(u,i)?(c==null||e>c.score)&&(c={ref:p,score:e}):LU(u,`filament`,n,r)===`mismatch`?(s==null||e>s.score)&&(s={ref:p,score:e}):(o==null||e>o.score)&&(o={ref:p,score:e})}return o==null?s==null?c==null?LG(e,`filament`):c.ref:s.ref:o.ref}function VG(e){return e?`${e.source}:${e.id}`:``}function eAe(e){if(!e)return null;let t=e.indexOf(`:`);if(t<0)return null;let n=e.slice(0,t),r=e.slice(t+1);return n!==`orca_cloud`&&n!==`cloud`&&n!==`local`&&n!==`standard`?null:{source:n,id:r}}function tAe({requestId:e,sourceName:t}){let{t:n}=U(),{showPersistentToast:r,dismissToast:i}=Gd(),[a,o]=(0,y.useState)(0),[s,c]=(0,y.useState)(null),l=t;try{l=decodeURIComponent(t)}catch{}(0,y.useEffect)(()=>{let e=Date.now(),t=setInterval(()=>o(Math.floor((Date.now()-e)/1e3)),1e3);return()=>clearInterval(t)},[]),(0,y.useEffect)(()=>{let t=!1,n=setInterval(async()=>{if(t)return;let n=await Z.getPreviewSliceProgress(e);!t&&n&&c(n)},1e3);return()=>{t=!0,clearInterval(n)}},[e]);let u=`slice-preview-${e}`;(0,y.useEffect)(()=>{let e=s&&s.stage&&s.total_percent>0,t=nAe(a);return e?r(u,n(`slice.previewWithProgress`,`Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,{name:l,stage:s.stage,percent:Math.min(100,Math.max(0,Math.round(s.total_percent))),elapsed:t}),`loading`):r(u,n(`slice.previewToast`,{name:l,elapsed:t}),`loading`),()=>{i(u)}},[a,s,l,r,i,n,u]);let d=s?.stage,f=s?.total_percent,p=d&&typeof f==`number`&&f>0?`${d} (${Math.min(100,Math.max(0,Math.round(f)))}%)`:n(`slice.analyzingPlateFilaments`);return(0,G.jsxs)(`div`,{className:`flex flex-col gap-1 text-bambu-gray text-sm py-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),p,(0,G.jsxs)(`span`,{className:`text-xs tabular-nums`,children:[a,`s`]})]}),a>=5&&(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray/70 pl-6`,children:n(`slice.analyzingPlateFilamentsHint`,`Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.`)})]})}function nAe(e){let t=Math.max(0,Math.floor(e));if(t<60)return`${t}s`;let n=Math.floor(t/60),r=t%60;return n<60?`${n}m ${r}s`:`${Math.floor(n/60)}h ${n%60}m`}var rAe=`#00AE42`;function HG(e){let t=(e||``).trim();return/^#[0-9a-fA-F]{6}([0-9a-fA-F]{2})?$/.test(t)?t.slice(0,7).toUpperCase():rAe}function UG({source:e,onClose:t}){let{t:n}=U(),{trackJob:r}=CG(),i=co(),[a,o]=(0,y.useState)(null),[s,c]=(0,y.useState)(null),[l,u]=(0,y.useState)([]),d=(0,y.useRef)(new Set),[f,p]=(0,y.useState)([]),[m,h]=(0,y.useState)(null),[g,_]=(0,y.useState)(null),[v,b]=(0,y.useState)(!1),[x,S]=(0,y.useState)(null),[C,w]=(0,y.useState)(!1),[T,E]=(0,y.useState)(!1),[D,O]=(0,y.useState)(!1),[k,A]=(0,y.useState)(new Set),[j,M]=(0,y.useState)({}),[N,P]=(0,y.useState)({}),[F,I]=(0,y.useState)(!1),L=kke(),R=L||F,z=K({queryKey:[`slicer-pipelines`],queryFn:()=>Z.listSlicerPipelines(),staleTime:6e4}),[B,V]=(0,y.useState)(!1),[ee,te]=(0,y.useState)(``),{showToast:ne}=Gd(),re=q({mutationFn:e=>Z.createSlicerPipeline(e),onSuccess:()=>{i.invalidateQueries({queryKey:[`slicer-pipelines`]}),ne(n(`slice.pipelines.toast.saved`,`Pipeline saved`),`success`),V(!1),te(``)},onError:e=>{ne(e.message||n(`slice.pipelines.toast.saveFailed`,`Save failed`),`error`)}}),ie=K({queryKey:[`slicePlates`,e.kind,e.id],queryFn:async()=>e.kind===`libraryFile`?Z.getLibraryFilePlates(e.id):Z.getArchivePlates(e.id),staleTime:6e4}),ae=!!ie.data?.is_multi_plate&&(ie.data?.plates?.length??0)>1,oe=ae&&g==null,se=g??1,H=(0,y.useMemo)(()=>{let t=typeof crypto<`u`&&`randomUUID`in crypto?crypto.randomUUID():`${Date.now()}-${Math.random().toString(36).slice(2)}`;return`${e.kind}-${e.id}-p${se}-${t}`},[e.kind,e.id,se]),ce=K({queryKey:[`sliceFilamentReqs`,e.kind,e.id,se],queryFn:async()=>e.kind===`libraryFile`?Z.getLibraryFileFilamentRequirements(e.id,se,H,!0):Z.getArchiveFilamentRequirements(e.id,se,H,!0),enabled:!oe,staleTime:6e4}),le=(0,y.useMemo)(()=>{let e=ce.data?.filaments??[],t=e.length>0?e:[{slot_id:1,type:``,color:``,used_grams:0,used_meters:0}];return v?t.map(e=>({...e,used_in_plate:!0})):t},[v,ce.data]),ue=K({queryKey:[`slicerPresets`],queryFn:()=>Z.getSlicerPresets(),staleTime:6e4,enabled:!ie.isLoading&&!oe}),[de,fe]=(0,y.useState)(!1),pe=async()=>{if(!de){fe(!0);try{let e=await Z.getSlicerPresets({refresh:!0});i.setQueryData([`slicerPresets`],e)}catch{i.invalidateQueries({queryKey:[`slicerPresets`]})}finally{fe(!1)}}},me=K({queryKey:[`slicerPrinterModels`],queryFn:Z.getSlicerPrinterModels,staleTime:1/0}),he=(0,y.useMemo)(()=>!ue.data||!a?null:RG(ue.data,a,`printer`)?.name??null,[ue.data,a]),ge=(0,y.useMemo)(()=>jU(me.data??{}),[me.data]),_e=K({queryKey:[`slicer-preset-values`,s?.source,s?.id],queryFn:()=>Z.getSlicerPresetValues(s),enabled:s!=null,staleTime:5*6e4}),ve=_e.data?.values,ye=_e.data?.resolved??_e.isLoading,be=_e.data?.reason??(_e.isError?`sidecar_unavailable`:void 0),xe=(0,y.useMemo)(()=>{let e=ue.data;return le.map((t,r)=>{let i=l[r]??null,a=e&&i?RG(e,i,`filament`):null;return{index:r+1,label:a?.name||t.type||n(`slice.filamentSlotUnset`,`not set`),color:t.color||void 0}})},[le,l,ue.data,n]),Se=ie.data?.embedded_printer??null,Ce=(0,y.useMemo)(()=>ie.data?.design_overrides??[],[ie.data]),we=ie.data?.embedded_process??null,Te=(0,y.useMemo)(()=>{if(!Se||!we||!he)return!1;let e=e=>e.replace(/^#\s*/,``).trim().toLowerCase();return e(he)===e(Se)},[Se,we,he]);(0,y.useEffect)(()=>{Te||w(!1)},[Te]),(0,y.useEffect)(()=>{A(C?new Set(Ce.map(e=>e.key)):new Set)},[Ce,C]),(0,y.useEffect)(()=>{let e=ue.data;e&&(a??o(zG(e,`printer`,Se)??LG(e,`printer`)))},[ue.data,Se]),(0,y.useEffect)(()=>{let e=ue.data;e&&c(t=>{if(t){let n=RG(e,t,`process`);if(n&&LU(n,`process`,he,ge)!==`mismatch`)return t}return Yke(e,he,ge,we)})},[ue.data,he,ge,we]),(0,y.useEffect)(()=>{let e=ue.data;e&&u(t=>le.map((n,r)=>{let i=t[r]??null;if(i){let t=RG(e,i,`filament`),a=t&&!d.current.has(r)&&BG(t,n.type);if(t&&!a&&LU(t,`filament`,he,ge)!==`mismatch`)return i}return $ke(e,{type:n.type,color:n.color},he,ge)}))},[ue.data,le,he,ge]),(0,y.useEffect)(()=>{p(e=>e.length===le.length?e:(d.current=new Set,le.map(()=>null)))},[le]);let Ee=q({mutationFn:async t=>{let n=De(t);return e.kind===`libraryFile`?Z.sliceLibraryFile(e.id,n):Z.sliceArchive(e.id,n)},onSuccess:n=>{r(n.job_id,e.kind,e.filename),t()},onError:e=>{h(e instanceof Error?e.message:String(e))}});function De(e){if(!a||!s||l.length===0||l.some(e=>e==null))throw Error(n(`slice.allPresetsRequired`));return{printer_preset:a,process_preset:s,filament_preset:l[0],filament_presets:l,filament_colours:le.map((e,t)=>f[t]??e.color??``),...e==null?{}:{plate:e},...x==null?{}:{bed_type:x},...C&&Te?{use_embedded_settings:!0}:{},...!C&&Ce.length>0?{design_overrides:[...k]}:{},...!C&&Object.keys(j).length>0?{process_overrides:N}:{},...T?{auto_orient:!0}:{},...D?{auto_arrange:!0}:{}}}let Oe=a!=null&&s!=null&&ce.isSuccess&&l.length>0&&l.every(e=>e!=null),ke=Ee.isPending,Ae=ie.data?.plates?.length??0,je=ae&&Ae>1&&!oe;return oe&&ie.data?(0,G.jsx)(TG,{plates:ie.data.plates,onSelect:e=>_(e),onClose:t}):(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/60 p-4`,onClick:()=>{ke||t()},children:(0,G.jsxs)(`div`,{className:`w-full max-w-xl lg:max-w-5xl max-h-[85vh] flex flex-col rounded-lg bg-bambu-dark-secondary border border-bambu-dark-tertiary/60`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex-shrink-0 flex items-start justify-between gap-3 px-4 pt-4 pb-3 border-b border-bambu-dark-tertiary/40`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsxs)(`h3`,{className:`text-white font-medium flex items-center gap-2`,children:[(0,G.jsx)(Rs,{className:`w-4 h-4`}),n(`slice.title`)]}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-1 truncate`,title:e.filename,children:[e.filename,g==null?``:` • ${n(`archives.platePicker.plateLabel`,{index:g})}`]})]}),(0,G.jsx)(`button`,{onClick:t,disabled:ke,className:`flex-shrink-0 text-bambu-gray hover:text-white transition-colors disabled:opacity-50`,"aria-label":n(`common.close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`flex-1 overflow-y-auto p-4 space-y-4`,children:[(ie.isLoading||ue.isLoading)&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray text-sm`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),n(`slice.loadingPresets`)]}),ue.isError&&(0,G.jsx)(`div`,{className:`text-sm text-red-700 dark:text-red-400`,role:`alert`,children:n(`slice.presetsLoadFailed`,`Failed to load presets. Open Settings → Profiles to import them, or sign in to Bambu Cloud.`)}),ue.data&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex-1 space-y-2`,children:[(0,G.jsx)(WG,{status:ue.data.cloud_status,cloudName:`bambu`}),(0,G.jsx)(WG,{status:ue.data.orca_cloud_status,cloudName:`orca`})]}),(0,G.jsxs)(`button`,{type:`button`,onClick:pe,disabled:de||ke,className:`flex-shrink-0 inline-flex items-center gap-1 px-2 py-1 rounded-md text-xs text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary/40 disabled:opacity-50 disabled:cursor-not-allowed transition-colors`,title:n(`slice.refreshPresetsTitle`),"aria-label":n(`slice.refreshPresets`),children:[(0,G.jsx)(Vl,{className:`w-3.5 h-3.5 ${de?`animate-spin`:``}`}),n(`slice.refreshPresets`)]})]}),(0,G.jsxs)(`div`,{className:`lg:grid lg:grid-cols-[minmax(0,20rem)_minmax(0,1fr)] lg:gap-5 lg:items-start`,children:[(0,G.jsxs)(`div`,{className:`space-y-4 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 px-2 py-1.5 rounded-md bg-bambu-dark/40 border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`span`,{className:`text-xs font-medium text-bambu-gray flex items-center gap-1`,children:[(0,G.jsx)(Rs,{className:`w-3.5 h-3.5`}),` `,n(`slice.pipelines.label`,`Pipeline`)]}),(0,G.jsxs)(`select`,{value:``,disabled:ke||(z.data?.pipelines.length??0)===0,onChange:e=>{let t=parseInt(e.target.value,10);if(Number.isNaN(t))return;let r=z.data?.pipelines.find(e=>e.id===t);r&&(o(r.printer_preset),c(r.process_preset),S(r.bed_type),u(e=>{let t=e.length>0?[...e]:r.filament_presets.map(()=>null);for(let e=0;e<t.length;e++)e<r.filament_presets.length&&(t[e]=r.filament_presets[e],d.current.add(e));return t}),ne(n(`slice.pipelines.toast.applied`,`Applied "{{name}}"`,{name:r.name}),`success`),e.target.value=``)},className:`text-xs px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white disabled:opacity-50 disabled:cursor-not-allowed flex-1 min-w-[10ch]`,"aria-label":n(`slice.pipelines.applyAria`,`Apply pipeline`),children:[(0,G.jsx)(`option`,{value:``,children:(z.data?.pipelines.length??0)===0?n(`slice.pipelines.empty`,`No saved pipelines`):n(`slice.pipelines.applyPrompt`,`Apply pipeline…`)}),z.data?.pipelines.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]}),B?(0,G.jsxs)(`div`,{className:`flex items-center gap-1 flex-1 min-w-[16ch]`,children:[(0,G.jsx)(`input`,{autoFocus:!0,value:ee,onChange:e=>te(e.target.value),placeholder:n(`slice.pipelines.namePlaceholder`,`Pipeline name`),"aria-label":n(`slice.pipelines.nameAria`,`New pipeline name`),className:`flex-1 text-xs px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white`}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>{let e=ee.trim();if(!e||!a||!s)return;let t=l.filter(e=>e!==null);t.length!==0&&re.mutate({name:e,printer_preset:a,process_preset:s,filament_presets:t,bed_type:x})},disabled:re.isPending||!ee.trim(),className:`text-xs px-2 py-1 bg-bambu-green hover:bg-bambu-green/80 text-white rounded disabled:opacity-50`,children:re.isPending?(0,G.jsx)(Y,{className:`w-3 h-3 animate-spin`}):n(`common.save`,`Save`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>{V(!1),te(``)},className:`text-xs px-2 py-1 text-bambu-gray hover:text-white`,children:n(`common.cancel`,`Cancel`)})]}):(0,G.jsx)(`button`,{type:`button`,onClick:()=>{te(``),V(!0)},disabled:ke||!a||!s||l.length===0||l.some(e=>e===null),className:`text-xs px-2 py-1 bg-bambu-green/20 hover:bg-bambu-green/30 text-bambu-green border border-bambu-green/40 rounded disabled:opacity-50 disabled:cursor-not-allowed`,title:n(`slice.pipelines.saveTitle`,`Save the current four-slot selection as a reusable pipeline`),children:n(`slice.pipelines.saveButton`,`Save as pipeline`)})]}),(0,G.jsx)(GG,{label:n(`slice.printer`),slot:`printer`,data:ue.data,value:a,onChange:o,disabled:ke||C}),Te&&(0,G.jsxs)(`label`,{className:`flex items-start gap-2 text-sm text-bambu-gray cursor-pointer select-none`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:C,onChange:e=>w(e.target.checked),disabled:ke,className:`mt-0.5 cursor-pointer`}),(0,G.jsxs)(`span`,{children:[n(`slice.useEmbedded`),(0,G.jsx)(`span`,{className:`block text-xs text-bambu-gray/70`,children:n(`slice.useEmbeddedHint`)})]})]}),(0,G.jsx)(GG,{label:n(`slice.process`),slot:`process`,data:ue.data,value:s,onChange:c,disabled:ke||C,selectedPrinterName:he,compatIndex:ge}),(0,G.jsx)(aAe,{value:x,onChange:S,disabled:ke||C}),(0,G.jsxs)(`div`,{className:`flex flex-col gap-2`,children:[(0,G.jsxs)(`label`,{className:`flex items-start gap-2 text-sm text-bambu-gray cursor-pointer select-none`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:T,onChange:e=>E(e.target.checked),disabled:ke,className:`mt-0.5 cursor-pointer`}),(0,G.jsxs)(`span`,{children:[n(`slice.autoOrient`),(0,G.jsx)(`span`,{className:`block text-xs text-bambu-gray/70`,children:n(`slice.autoOrientHint`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-start gap-2 text-sm text-bambu-gray cursor-pointer select-none`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:D,onChange:e=>O(e.target.checked),disabled:ke,className:`mt-0.5 cursor-pointer`}),(0,G.jsxs)(`span`,{children:[n(`slice.autoArrange`),(0,G.jsx)(`span`,{className:`block text-xs text-bambu-gray/70`,children:n(`slice.autoArrangeHint`)})]})]})]}),ce.isLoading?(0,G.jsx)(tAe,{requestId:H,sourceName:e.filename}):le.map((e,t)=>{let r=e.used_in_plate!==!1,i=le.length>1?n(`slice.filamentSlot`,{index:t+1,type:e.type}):n(`slice.filament`);return(0,G.jsx)(GG,{label:r?i:`${i} ${n(`slice.notUsedByPlate`)}`,slot:`filament`,data:ue.data,value:l[t]??null,onChange:e=>{d.current.add(t),u(n=>{let r=n.length===le.length?[...n]:le.map((e,t)=>n[t]??null);return r[t]=e,r})},disabled:ke||!r||C,swatchColor:f[t]??e.color,swatchColorLabel:n(`slice.filamentColour`),onSwatchColorChange:e=>p(n=>{let r=n.length===le.length?[...n]:le.map((e,t)=>n[t]??null);return r[t]=e,r}),selectedPrinterName:he,compatIndex:ge},`filament-${t}`)})]}),(0,G.jsx)(`div`,{className:`mt-4 lg:mt-0 min-w-0`,children:(0,G.jsxs)(`div`,{className:`rounded border border-bambu-dark-tertiary p-3 ${C?`opacity-60`:``}`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>I(e=>!e),"aria-expanded":R,disabled:L,className:`flex w-full items-center justify-between gap-2 text-left lg:cursor-default`,children:[(0,G.jsxs)(`span`,{className:`text-sm text-white`,children:[n(`slice.processSettings`,`Process settings`),(0,G.jsx)(`span`,{className:`block text-xs text-bambu-gray/70`,children:C?n(`slice.processSettingsEmbedded`,`Not used while "Use the file's built-in settings" is on -- the file's own settings drive this slice.`):n(`slice.processSettingsHint`,`Adjust the picked preset for this slice. Anything you don't touch stays as the preset defines it.`)})]}),(0,G.jsx)(`span`,{className:`shrink-0 text-xs text-bambu-gray`,children:C?n(`slice.processSettingsInactive`,`Inactive`):Object.keys(N).length>0?n(`slice.processSettingsChanged`,`{{count}} changed`,{count:Object.keys(N).length}):n(`slice.processSettingsUnchanged`,`Preset defaults`)})]}),R&&(0,G.jsx)(`div`,{className:`mt-3 border-t border-bambu-dark-tertiary pt-3`,children:(0,G.jsx)(Gke,{values:j,onChange:(e,t)=>{M(e),P(t)},disabled:ke||C,filamentChoices:xe,presetValues:ve,presetValuesResolved:ye,presetValuesReason:be,sourceOverrides:Ce,sourceSelected:k,onToggleSource:(e,t)=>A(n=>{let r=new Set(n);return t?r.add(e):r.delete(e),r})})})]})})]})]}),m&&(0,G.jsx)(`div`,{className:`text-sm text-red-700 dark:text-red-400 bg-red-900/20 border border-red-900/40 rounded p-2`,role:`alert`,children:m})]}),(0,G.jsxs)(`div`,{className:`flex-shrink-0 flex justify-end gap-2 px-4 py-3 border-t border-bambu-dark-tertiary/40`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:t,disabled:ke,className:`px-3 py-1.5 text-sm rounded-md border border-bambu-dark-tertiary text-bambu-gray hover:text-white hover:border-bambu-gray transition-colors disabled:opacity-50`,children:n(`common.cancel`)}),je&&(0,G.jsxs)(`label`,{className:`flex items-center gap-2 mr-auto text-sm text-bambu-gray cursor-pointer select-none`,title:n(`slice.actionAllTitle`,{count:Ae}),children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:v,onChange:e=>b(e.target.checked),disabled:ke,className:`cursor-pointer`}),n(`slice.allPlatesToggle`,{count:Ae})]}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>{h(null);let e=v?0:g;Ee.mutate(e)},disabled:!Oe||ke,className:`px-3 py-1.5 text-sm rounded-md bg-bambu-green hover:bg-bambu-green/90 text-bambu-dark font-medium transition-colors disabled:opacity-50 disabled:cursor-not-allowed flex items-center gap-2`,children:ke?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),n(`slice.enqueuing`)]}):v?n(`slice.actionAll`,{count:Ae}):n(`slice.action`)})]})]})})}function WG({status:e,cloudName:t=`bambu`}){let{t:n}=U();if(e===`ok`||e===`not_authenticated`)return null;let r=t===`orca`?{expired:{key:`slice.orcaCloud.expired`,fallback:`Orca Cloud session expired — sign in again to refresh your Orca presets.`},unreachable:{key:`slice.orcaCloud.unreachable`,fallback:`Orca Cloud is unreachable right now. Other presets still work.`}}:{expired:{key:`slice.cloud.expired`,fallback:`Bambu Cloud session expired — sign in again to refresh your cloud presets.`},unreachable:{key:`slice.cloud.unreachable`,fallback:`Bambu Cloud is unreachable right now. Local and standard presets still work.`}},{tone:i,icon:a}={expired:{tone:`border-amber-300 dark:border-amber-700/40 bg-amber-50 dark:bg-amber-900/20 text-amber-800 dark:text-amber-200`,icon:Ms},unreachable:{tone:`border-bambu-dark-tertiary/40 bg-bambu-dark text-bambu-gray`,icon:Ms}}[e],{key:o,fallback:s}=r[e];return(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-xs rounded-md border p-2 ${i}`,role:`status`,children:[(0,G.jsx)(a,{className:`w-4 h-4 flex-shrink-0 mt-0.5`}),(0,G.jsx)(`span`,{children:n(o,s)})]})}var iAe=[{value:`Cool Plate`,labelKey:`slice.bedType.coolPlate`,fallback:`Cool Plate`},{value:`Cool Plate (SuperTack)`,labelKey:`slice.bedType.coolPlateSuperTack`,fallback:`Cool Plate SuperTack`},{value:`Engineering Plate`,labelKey:`slice.bedType.engineering`,fallback:`Engineering Plate`},{value:`High Temp Plate`,labelKey:`slice.bedType.highTemp`,fallback:`High Temp Plate`},{value:`Textured PEI Plate`,labelKey:`slice.bedType.texturedPEI`,fallback:`Textured PEI Plate`},{value:`Smooth PEI Plate`,labelKey:`slice.bedType.smoothPEI`,fallback:`Smooth PEI Plate`}];function aAe({value:e,onChange:t,disabled:n}){let{t:r}=U();return(0,G.jsxs)(`label`,{className:`block`,children:[(0,G.jsx)(`span`,{className:`block text-xs text-bambu-gray mb-1`,children:r(`slice.bedType.label`)}),(0,G.jsxs)(`select`,{value:e??``,onChange:e=>t(e.target.value===``?null:e.target.value),disabled:n,className:`flex-1 min-w-0 px-3 py-2 rounded-md bg-bambu-dark border border-bambu-dark-tertiary text-white text-sm focus:outline-none focus:border-bambu-gray disabled:opacity-50`,children:[(0,G.jsx)(`option`,{value:``,children:r(`slice.bedType.auto`)}),iAe.map(e=>(0,G.jsx)(`option`,{value:e.value,children:r(e.labelKey,e.fallback)},e.value))]})]})}function GG({label:e,slot:t,data:n,value:r,onChange:i,disabled:a,swatchColor:o,onSwatchColorChange:s,swatchColorLabel:c,selectedPrinterName:l,compatIndex:u}){let{t:d}=U(),[f,p]=(0,y.useState)(!1),m=(0,y.useId)(),h=`${m}-colour`,{sections:g,otherEntries:_}=(0,y.useMemo)(()=>{let e=[{key:`local`,label:`slice.tier.local`,fallback:`Imported`},{key:`orca_cloud`,label:`slice.tier.orcaCloud`,fallback:`Orca Cloud`},{key:`cloud`,label:`slice.tier.cloud`,fallback:`Bambu Cloud`},{key:`standard`,label:`slice.tier.standard`,fallback:`Standard`}],r=t!==`printer`,i=[],a=[],o=[];for(let{key:s,label:c,fallback:f}of e){let e=n[s][t];if(e.length>0&&a.push({tierLabel:d(c,f),entries:e}),!r){e.length>0&&i.push({tierLabel:d(c,f),entries:e});continue}let p=[];for(let n of e)LU(n,t,l??null,u??rOe)===`mismatch`?o.push(n):p.push(n);p.length>0&&i.push({tierLabel:d(c,f),entries:p})}return i.length===0&&o.length>0?{sections:a,otherEntries:[]}:{sections:i,otherEntries:o}},[n,t,d,l,u]),v=VG(r),b=(0,y.useMemo)(()=>f?_:_.filter(e=>`${e.source}:${e.id}`===v),[f,_,v]),x=_.length-b.length,S=g.reduce((e,t)=>e+t.entries.length,0)+b.length;return(0,G.jsxs)(`div`,{className:`block`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-xs text-bambu-gray mb-1`,children:[!s&&o&&(0,G.jsx)(`span`,{className:`inline-block w-3 h-3 rounded-full border border-bambu-dark-tertiary`,style:{backgroundColor:o},"aria-hidden":!0}),(0,G.jsx)(`label`,{htmlFor:m,children:e}),(x>0||f)&&(0,G.jsxs)(`span`,{className:`ml-auto flex items-center gap-1.5 font-normal`,children:[x>0&&(0,G.jsx)(`span`,{className:`text-bambu-gray/60`,children:d(`slice.presetsHidden`,`{{count}} hidden`,{count:x})}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>p(e=>!e),disabled:a,className:`text-bambu-green hover:underline disabled:opacity-50 disabled:no-underline`,children:f?d(`slice.showFewerPresets`,`Show fewer`):d(`slice.showAllPresets`,`Show all`)})]})]}),(0,G.jsxs)(`div`,{className:`flex items-stretch gap-2`,children:[(0,G.jsxs)(`select`,{id:m,value:VG(r),onChange:e=>i(eAe(e.target.value)),disabled:a||S===0,className:`w-full px-3 py-2 rounded-md bg-bambu-dark border border-bambu-dark-tertiary text-white text-sm focus:outline-none focus:border-bambu-gray disabled:opacity-50`,children:[(0,G.jsx)(`option`,{value:``,children:d(S===0?`slice.noPresetsForSlot`:`slice.selectPreset`)}),g.map(e=>(0,G.jsx)(`optgroup`,{label:e.tierLabel,children:e.entries.map(e=>(0,G.jsx)(`option`,{value:`${e.source}:${e.id}`,children:e.name},`${e.source}:${e.id}`))},e.tierLabel)),b.length>0&&(0,G.jsx)(`optgroup`,{label:d(`slice.otherPrinters`),children:b.map(e=>(0,G.jsx)(`option`,{value:`${e.source}:${e.id}`,children:e.name},`${e.source}:${e.id}`))})]}),s&&(0,G.jsxs)(`label`,{htmlFor:h,title:c,className:`flex items-center gap-2 px-2.5 rounded-md bg-bambu-dark border border-bambu-dark-tertiary text-sm ${a?`opacity-50 cursor-not-allowed`:`cursor-pointer hover:border-bambu-gray transition-colors`}`,children:[(0,G.jsx)(`input`,{id:h,type:`color`,value:HG(o),onChange:e=>s(e.target.value.toUpperCase()),disabled:a,"aria-label":c,style:{backgroundColor:HG(o)},className:`slice-colour-swatch w-4 h-4 shrink-0 rounded-full border border-bambu-dark-tertiary p-0 disabled:cursor-not-allowed enabled:cursor-pointer`}),(0,G.jsx)(`span`,{className:`font-mono text-xs text-white tracking-tight`,children:HG(o)})]})]})]})}function KG({source:e,onClose:t}){let{t:n}=U(),r=co(),{showToast:i}=Gd(),[a,o]=(0,y.useState)(null),[s,c]=(0,y.useState)(null),[l,u]=(0,y.useState)(1),{trackJob:d}=CG(),{data:f,isLoading:p}=K({queryKey:[`slicer-pipelines`],queryFn:()=>Z.listSlicerPipelines()}),{data:m}=K({queryKey:[`printers`],queryFn:()=>Z.getPrinters()}),{data:h}=K({queryKey:[`app-settings`],queryFn:()=>Z.getSettings()}),g=h?.pipeline_max_copies??50,_={kind:e.kind,id:e.id},v=q({mutationFn:e=>Z.checkPipelineEligibility(e,_)}),b=q({mutationFn:({pipelineId:e,force:t})=>Z.runPipeline(e,_,t,l),onSuccess:a=>{r.invalidateQueries({queryKey:[`slicer-pipelines`]}),r.invalidateQueries({queryKey:[`pipeline-runs`]}),a.slice_job_id&&d(a.slice_job_id,e.kind,e.filename),i(n(`library.runWithPipeline.toast.started`,`Pipeline run started`),`success`),t()},onError:e=>{i(e.message||n(`library.runWithPipeline.toast.failed`,`Could not start run`),`error`)}}),x=f?.pipelines??[],S=(m??[]).reduce((e,t)=>(e[t.id]=t,e),{});return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 bg-black/60 flex items-center justify-center p-4`,onClick:t,role:`dialog`,"aria-modal":`true`,"aria-label":n(`library.runWithPipeline.modalTitle`,`Run with pipeline`),children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-2xl w-full max-w-md max-h-[80vh] flex flex-col overflow-hidden`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-4 py-3 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`h3`,{className:`text-sm font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Ml,{className:`w-4 h-4 text-bambu-green`}),a&&s?n(`library.runWithPipeline.confirmTitle`,`Confirm run`):n(`library.runWithPipeline.modalTitle`,`Run with pipeline`)]}),(0,G.jsx)(`button`,{type:`button`,onClick:t,"aria-label":n(`common.close`,`Close`),className:`text-bambu-gray hover:text-white`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto p-4 space-y-3`,children:a&&s?(0,G.jsx)(sAe,{pipeline:a,report:s,source:e,onBack:()=>{o(null),c(null)},onConfirm:()=>{a&&b.mutate({pipelineId:a.id,force:!0})},running:b.isPending}):(0,G.jsx)(oAe,{source:e,pipelines:x,printerById:S,loading:p||v.isPending,onPick:async e=>{if(!(e.target_printer_id||e.target_kind===`printer_class`&&e.target_model_class)){i(n(`library.runWithPipeline.noTargetMessage`,`This pipeline has no target printer set. Open it in Settings to pick one.`),`error`);return}o(e);try{let t=await v.mutateAsync(e.id);c(t),t.ok&&b.mutate({pipelineId:e.id,force:!1})}catch{o(null)}},copies:l,maxCopies:g,onCopiesChange:u})})]})})}function oAe({source:e,pipelines:t,printerById:n,loading:r,onPick:i,copies:a,maxCopies:o,onCopiesChange:s}){let{t:c}=U();return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[c(`library.runWithPipeline.sourceHint`,`Source`),`:`,` `,(0,G.jsx)(`span`,{className:`text-white`,children:e.filename})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`label`,{className:`text-xs text-bambu-gray`,htmlFor:`run-pipeline-copies`,children:[c(`library.runWithPipeline.copies`,`Copies`),`:`]}),(0,G.jsx)(`input`,{id:`run-pipeline-copies`,type:`number`,min:1,max:o,value:a,onChange:e=>{let t=parseInt(e.target.value,10);Number.isNaN(t)||s(Math.max(1,Math.min(o,t)))},"aria-label":c(`library.runWithPipeline.copies`,`Copies`),className:`w-20 px-2 py-1 text-xs bg-bambu-dark border border-bambu-dark-tertiary rounded text-white`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray/60`,children:c(`library.runWithPipeline.copiesHint`,`max {{n}}`,{n:o})})]}),r&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),c(`library.runWithPipeline.loading`,`Loading…`)]}),!r&&t.length===0&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:c(`library.runWithPipeline.empty`,`No pipelines saved yet. Open the Slice dialog and click "Save as pipeline" to create one.`)}),!r&&t.length>0&&(0,G.jsx)(`ul`,{className:`space-y-1.5`,"aria-label":c(`library.runWithPipeline.pipelineListAria`,`Available pipelines`),children:t.map(e=>{let t=e.target_kind===`printer_class`,r=e.target_printer_id?n[e.target_printer_id]?.name:null,a=t&&e.target_model_class?c(`library.runWithPipeline.classTarget`,`Any {{model}}`,{model:e.target_model_class}):null;return(0,G.jsx)(`li`,{children:(0,G.jsxs)(`button`,{type:`button`,onClick:()=>i(e),disabled:!(e.target_printer_id||t&&e.target_model_class),className:`w-full text-left px-3 py-2 rounded-md border border-bambu-dark-tertiary bg-bambu-dark/40 hover:bg-bambu-dark-tertiary disabled:opacity-50 disabled:cursor-not-allowed transition-colors`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Rs,{className:`w-3.5 h-3.5 text-bambu-green flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm font-medium text-white truncate`,children:e.name})]}),(0,G.jsxs)(`div`,{className:`mt-1 text-xs text-bambu-gray flex items-center gap-1`,children:[(0,G.jsx)(Ll,{className:`w-3 h-3`}),a?(0,G.jsx)(`span`,{children:a}):r?(0,G.jsx)(`span`,{children:r}):(0,G.jsx)(`span`,{className:`text-amber-700 dark:text-amber-400`,children:c(`library.runWithPipeline.noTarget`,`No target printer set`)})]})]})},e.id)})})]})}function sAe({pipeline:e,report:t,source:n,onBack:r,onConfirm:i,running:a}){let{t:o}=U();return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray`,children:[(0,G.jsxs)(`p`,{children:[o(`library.runWithPipeline.confirmIntro`,`Pre-flight found issues with this run`),`:`]}),(0,G.jsxs)(`p`,{className:`mt-1`,children:[(0,G.jsxs)(`span`,{className:`text-bambu-gray/70`,children:[o(`library.runWithPipeline.sourceHint`,`Source`),`: `]}),(0,G.jsx)(`span`,{className:`text-white`,children:n.filename})]}),(0,G.jsxs)(`p`,{children:[(0,G.jsxs)(`span`,{className:`text-bambu-gray/70`,children:[o(`library.runWithPipeline.pipelineHint`,`Pipeline`),`: `]}),(0,G.jsx)(`span`,{className:`text-white`,children:e.name})]}),t.target_printer_name&&(0,G.jsxs)(`p`,{children:[(0,G.jsxs)(`span`,{className:`text-bambu-gray/70`,children:[o(`library.runWithPipeline.targetHint`,`Target`),`: `]}),(0,G.jsx)(`span`,{className:`text-white`,children:t.target_printer_name})]})]}),(0,G.jsx)(`ul`,{className:`space-y-1.5`,children:t.issues.map((e,t)=>(0,G.jsxs)(`li`,{className:`flex items-start gap-2 text-xs`,children:[(0,G.jsx)(Iu,{className:`w-3.5 h-3.5 text-amber-600 dark:text-amber-400 flex-shrink-0 mt-0.5`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:(0,G.jsx)(cAe,{issue:e})})]},t))}),(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-2 pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:r,disabled:a,className:`px-3 py-1.5 text-xs text-bambu-gray hover:text-white`,children:o(`common.back`,`Back`)}),(0,G.jsxs)(`button`,{type:`button`,onClick:i,disabled:a,className:`px-3 py-1.5 text-xs bg-amber-500 hover:bg-amber-600 text-white rounded disabled:opacity-50 flex items-center gap-1`,children:[a?(0,G.jsx)(Y,{className:`w-3 h-3 animate-spin`}):(0,G.jsx)(Ml,{className:`w-3 h-3`}),o(`library.runWithPipeline.runAnyway`,`Run anyway`)]})]})]})}function cAe({issue:e}){let{t}=U();switch(e.kind){case`printer_not_set`:return(0,G.jsx)(G.Fragment,{children:t(`library.runWithPipeline.issue.printerNotSet`,`No target printer set on this pipeline.`)});case`printer_not_found`:return(0,G.jsx)(G.Fragment,{children:t(`library.runWithPipeline.issue.printerNotFound`,`Target printer no longer exists.`)});case`printer_disabled`:return(0,G.jsx)(G.Fragment,{children:t(`library.runWithPipeline.issue.printerDisabled`,`Target printer is disabled.`)});case`printer_offline`:return(0,G.jsx)(G.Fragment,{children:t(`library.runWithPipeline.issue.printerOffline`,`Target printer is offline.`)});case`filament_type_mismatch`:return(0,G.jsx)(G.Fragment,{children:t(`library.runWithPipeline.issue.filamentType`,`Filament slot {{slot}}: expected {{expected}}, AMS has {{actual}}`,{slot:(e.slot_index??0)+1,expected:e.expected??`?`,actual:e.actual??`?`})});case`filament_color_mismatch`:return(0,G.jsx)(G.Fragment,{children:t(`library.runWithPipeline.issue.filamentColor`,`Filament slot {{slot}}: colour differs (expected {{expected}}, AMS has {{actual}})`,{slot:(e.slot_index??0)+1,expected:e.expected??`?`,actual:e.actual??`?`})});case`ams_slot_missing`:return(0,G.jsx)(G.Fragment,{children:t(`library.runWithPipeline.issue.amsSlotMissing`,`AMS slot {{slot}} not available on this printer`,{slot:(e.slot_index??0)+1})});case`filament_unverified`:return(0,G.jsx)(G.Fragment,{children:t(`library.runWithPipeline.issue.filamentUnverified`,`Filament slot {{slot}} comes from a cloud / standard preset and could not be statically verified.`,{slot:(e.slot_index??0)+1})});default:return(0,G.jsx)(G.Fragment,{children:e.kind})}}function qG(e,t){return e??t??`bambu_studio`}var JG={bambu_studio:[`3mf`],orcaslicer:[`3mf`,`stl`,`step`,`stp`]};function YG(e){return JG[e]??JG.bambu_studio}var XG=[`3mf`,`stl`];function lAe(e,t){let n=(e||``).toLowerCase();return YG(t).includes(n)}function uAe(e,t){let n=e.toLowerCase();return n.endsWith(`.gcode`)||n.endsWith(`.gcode.3mf`)?!1:YG(t).some(e=>n.endsWith(`.${e}`))}function dAe(e){let t=e.toLowerCase();return t.endsWith(`.gcode`)||t.endsWith(`.gcode.3mf`)?!1:XG.some(e=>t.endsWith(`.${e}`))}function fAe(){let e=navigator.userAgent.toLowerCase(),t=navigator.platform?.toLowerCase()||``;return e.includes(`win`)||t.includes(`win`)?`windows`:e.includes(`mac`)||t.includes(`mac`)?`macos`:e.includes(`linux`)||t.includes(`linux`)?`linux`:`unknown`}function ZG(e,t=`bambu_studio`){let n,r=encodeURIComponent(e);n=t===`orcaslicer`?`orcaslicer://open?file=${r}`:fAe()===`macos`?`bambustudioopen://${r}`:`bambustudio://open?file=${r}`;let i=document.createElement(`a`);i.href=n,i.style.display=`none`,document.body.appendChild(i),i.click(),document.body.removeChild(i)}function pAe(e){let t=(e||``).toLowerCase();return XG.includes(t)}var mAe=[[`projects`],[`project`],[`project-archives`],[`project-timeline`],[`project-file-progress`]];function hAe(e){return Promise.all(mAe.map(t=>e.invalidateQueries({queryKey:[...t]})))}function QG(e){return Promise.all([e.invalidateQueries({queryKey:[`archives`]}),hAe(e)])}function gAe(e,t){if(t===void 0)return e;let n=new Set([t]),r=!0;for(;r;){r=!1;for(let t of e)t.parent_id!==null&&n.has(t.parent_id)&&!n.has(t.id)&&(n.add(t.id),r=!0)}return e.filter(e=>!n.has(e.id))}function $G(e,t){return e.filter(e=>e.status!==`archived`||e.id===t)}function eK({onFiles:e,onRejected:t,extensions:n,disabled:r=!1}){let[i,a]=(0,y.useState)(!1),o=(0,y.useRef)(e),s=(0,y.useRef)(t),c=(0,y.useRef)(n);(0,y.useEffect)(()=>{o.current=e},[e]),(0,y.useEffect)(()=>{s.current=t},[t]),(0,y.useEffect)(()=>{c.current=n},[n]);let l=(0,y.useCallback)(e=>{r||(e.preventDefault(),e.dataTransfer.types.includes(`Files`)&&a(!0))},[r]),u=(0,y.useCallback)(e=>{r||(e.preventDefault(),e.dataTransfer.types.includes(`Files`)&&a(!0))},[r]),d=(0,y.useCallback)(e=>{if(r)return;e.preventDefault();let t=e.currentTarget,n=e.relatedTarget;(!n||!t.contains(n))&&a(!1)},[r]),f=(0,y.useCallback)(e=>{if(r)return;e.preventDefault(),a(!1);let t=Array.from(e.dataTransfer.files);if(t.length===0)return;let n=c.current,i=n&&n.length>0?t.filter(e=>n.some(t=>e.name.toLowerCase().endsWith(t))):t;i.length>0?o.current(i):s.current?.()},[r]);return(0,y.useEffect)(()=>{if(!i)return;let e=()=>a(!1),t=t=>{t.key===`Escape`&&e()};return document.addEventListener(`drop`,e),document.addEventListener(`dragend`,e),document.addEventListener(`keydown`,t),()=>{document.removeEventListener(`drop`,e),document.removeEventListener(`dragend`,e),document.removeEventListener(`keydown`,t)}},[i]),{isDraggingOver:i,dragHandlers:{onDragOver:l,onDragEnter:u,onDragLeave:d,onDrop:f}}}function _Ae({onClose:e,initialFiles:t}){let{t:n}=U(),r=co(),{showToast:i}=Gd(),a=(0,y.useRef)(null),[o,s]=(0,y.useState)(()=>t?.filter(e=>e.name.endsWith(`.3mf`)).map(e=>({file:e,status:`pending`}))||[]),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(null);(0,y.useEffect)(()=>{let t=t=>{t.key===`Escape`&&e()};return window.addEventListener(`keydown`,t),()=>window.removeEventListener(`keydown`,t)},[e]);let f=q({mutationFn:e=>Z.uploadArchivesBulk(e),onSuccess:e=>{d(e),r.invalidateQueries({queryKey:[`archives`]}),r.invalidateQueries({queryKey:[`archiveStats`]}),s(t=>t.map(t=>{let n=e.results.find(e=>e.filename===t.file.name),r=e.errors.find(e=>e.filename===t.file.name);return n?{...t,status:`success`,archiveId:n.id}:r?{...t,status:`error`,error:r.error}:t})),e.failed===0?i(`${e.uploaded} file${e.uploaded===1?``:`s`} uploaded`):e.uploaded===0?i(`Failed to upload ${e.failed} file${e.failed===1?``:`s`}`,`error`):i(`${e.uploaded} uploaded, ${e.failed} failed`,`warning`)},onError:()=>{s(e=>e.map(e=>({...e,status:`error`,error:`Upload failed`}))),i(`Upload failed`,`error`)}}),p=(0,y.useCallback)(e=>{e.preventDefault(),l(!0)},[]),m=(0,y.useCallback)(e=>{e.preventDefault(),l(!1)},[]),h=(0,y.useCallback)(e=>{e.preventDefault(),l(!1);let t=Array.from(e.dataTransfer.files).filter(e=>e.name.endsWith(`.3mf`));t.length>0&&s(e=>[...e,...t.map(e=>({file:e,status:`pending`}))])},[]),g=(0,y.useCallback)(e=>{let t=Array.from(e.target.files||[]).filter(e=>e.name.endsWith(`.3mf`));t.length>0&&s(e=>[...e,...t.map(e=>({file:e,status:`pending`}))]),a.current&&(a.current.value=``)},[]),_=(0,y.useCallback)(e=>{s(t=>t.filter((t,n)=>n!==e))},[]),v=()=>{if(o.length===0)return;let e=o.filter(e=>e.status===`pending`);e.length!==0&&(s(e=>e.map(e=>e.status===`pending`?{...e,status:`uploading`}:e)),f.mutate(e.map(e=>e.file)))},b=o.filter(e=>e.status===`pending`).length,x=f.isPending;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,children:(0,G.jsx)(Ld,{className:`w-full max-w-2xl max-h-[90vh] flex flex-col`,children:(0,G.jsxs)(zd,{className:`p-0 flex flex-col h-full`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`h2`,{className:`text-xl font-semibold text-white`,children:n(`uploadModal.title`)}),(0,G.jsx)(`button`,{onClick:e,className:`text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(`div`,{className:`p-4`,children:(0,G.jsxs)(`div`,{className:`border-2 border-dashed rounded-lg p-8 text-center transition-colors ${c?`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary hover:border-bambu-gray`}`,onDragOver:p,onDragLeave:m,onDrop:h,children:[(0,G.jsx)(Bu,{className:`w-12 h-12 mx-auto mb-4 text-bambu-gray`}),(0,G.jsx)(`p`,{className:`text-white mb-2`,children:n(`uploadModal.dragDrop`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm mb-4`,children:n(`uploadModal.or`)}),(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>a.current?.click(),disabled:x,children:n(`uploadModal.browseFiles`)}),(0,G.jsx)(`input`,{ref:a,type:`file`,accept:`.3mf`,multiple:!0,className:`hidden`,onChange:g})]})}),(0,G.jsx)(`div`,{className:`px-4 pb-4`,children:(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`uploadModal.extractionInfo`)})}),o.length>0&&(0,G.jsx)(`div`,{className:`px-4 pb-4 max-h-60 overflow-y-auto`,children:(0,G.jsx)(`div`,{className:`space-y-2`,children:o.map((e,t)=>(0,G.jsxs)(`div`,{className:`flex items-center gap-3 p-3 bg-bambu-dark rounded-lg`,children:[(0,G.jsx)(fc,{className:`w-5 h-5 text-bambu-gray flex-shrink-0`}),(0,G.jsx)(`span`,{className:`flex-1 text-white text-sm truncate`,children:e.file.name}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[(e.file.size/(1024*1024)).toFixed(1),` MB`]}),e.status===`pending`&&(0,G.jsx)(`button`,{onClick:()=>_(t),className:`text-bambu-gray hover:text-red-600 dark:hover:text-red-400 transition-colors`,disabled:x,children:(0,G.jsx)(td,{className:`w-4 h-4`})}),e.status===`uploading`&&(0,G.jsx)(Y,{className:`w-4 h-4 text-bambu-green animate-spin`}),e.status===`success`&&(0,G.jsx)(xs,{className:`w-4 h-4 text-bambu-green`}),e.status===`error`&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-xs text-red-700 dark:text-red-400`,children:e.error}),(0,G.jsx)(ys,{className:`w-4 h-4 text-red-600 dark:text-red-400`})]})]},`${e.file.name}-${t}`))})}),u&&(0,G.jsx)(`div`,{className:`px-4 pb-4`,children:(0,G.jsx)(`div`,{className:`p-3 bg-bambu-dark rounded-lg`,children:(0,G.jsxs)(`p`,{className:`text-sm text-white`,children:[(0,G.jsx)(`span`,{className:`text-bambu-green`,children:u.uploaded}),` `,n(`uploadModal.uploaded`),u.failed>0&&(0,G.jsxs)(G.Fragment,{children:[`, `,(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:u.failed}),` `,n(`uploadModal.failed`)]})]})})}),(0,G.jsxs)(`div`,{className:`flex gap-3 p-4 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:e,className:`flex-1`,children:n(u?`common.close`:`common.cancel`)}),!u&&(0,G.jsx)(Q,{onClick:v,disabled:b===0||x,className:`flex-1`,children:x?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),n(`uploadModal.uploading`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Bu,{className:`w-4 h-4`}),n(`uploadModal.upload`),` `,b>0&&`(${b})`]})})]})]})})})}var vAe=365;function yAe({onClose:e,initialDays:t}){let{t:n}=U(),r=co(),{showToast:i}=Gd(),[a,o]=(0,y.useState)(t??vAe),[s,c]=(0,y.useState)(!1),[l,u]=(0,y.useState)(a);(0,y.useEffect)(()=>{let e=window.setTimeout(()=>u(a),300);return()=>window.clearTimeout(e)},[a]);let d=K({queryKey:[`archive-purge-preview`,l,s],queryFn:()=>Z.previewArchivePurge(l,s),enabled:l>=1}),f=q({mutationFn:()=>Z.executeArchivePurge(a,s),onSuccess:t=>{i(n(`archivePurge.toast.success`,{count:t.deleted}),`success`),r.invalidateQueries({queryKey:[`archives`]}),r.invalidateQueries({queryKey:[`archive-stats`]}),e()},onError:e=>i(e.message||n(`archivePurge.toast.failed`),`error`)});(0,y.useEffect)(()=>{let t=t=>{t.key===`Escape`&&!f.isPending&&e()};return window.addEventListener(`keydown`,t),()=>window.removeEventListener(`keydown`,t)},[e,f.isPending]);let p=d.data,m=p?.count??0,h=p?.total_bytes??0,g=m>0&&!f.isPending;return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-white dark:bg-gray-900 rounded-lg shadow-xl max-w-lg w-full`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-gray-200 dark:border-gray-700`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-gray-900 dark:text-gray-100 flex items-center gap-2`,children:[(0,G.jsx)(Nu,{className:`w-5 h-5`}),n(`archivePurge.title`)]}),(0,G.jsx)(`button`,{onClick:e,className:`text-gray-400 hover:text-gray-600 dark:hover:text-gray-200`,"aria-label":n(`common.close`),disabled:f.isPending,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-gray-600 dark:text-gray-400`,children:n(`archivePurge.description`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`archive-purge-days`,className:`block text-sm font-medium text-gray-700 dark:text-gray-300 mb-1`,children:n(`archivePurge.ageLabel`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`input`,{id:`archive-purge-days`,type:`number`,min:1,max:3650,value:a,onChange:e=>o(Math.max(1,Math.min(3650,parseInt(e.target.value||`0`,10)||0))),className:`w-24 rounded border border-gray-300 dark:border-gray-600 bg-white dark:bg-gray-800 text-sm px-2 py-1 text-gray-900 dark:text-gray-100`}),(0,G.jsx)(`span`,{className:`text-sm text-gray-600 dark:text-gray-400`,children:n(`archivePurge.days`)})]})]}),(0,G.jsxs)(`div`,{className:`rounded border border-gray-200 dark:border-gray-700 bg-gray-50 dark:bg-gray-800/30 p-3`,children:[(0,G.jsx)(`div`,{className:`text-xs font-semibold uppercase tracking-wide text-gray-600 dark:text-gray-300 mb-2`,children:n(`archivePurge.effectsTitle`)}),(0,G.jsxs)(`ul`,{className:`text-xs text-gray-700 dark:text-gray-300 space-y-1 list-disc pl-4`,children:[(0,G.jsx)(`li`,{children:n(`archivePurge.effect1`)}),(0,G.jsx)(`li`,{children:n(`archivePurge.effect2`)}),(0,G.jsx)(`li`,{children:n(`archivePurge.effect3`)}),(0,G.jsx)(`li`,{children:n(`archivePurge.effect4`)})]})]}),(0,G.jsx)(`div`,{className:`rounded border border-gray-200 dark:border-gray-700 bg-gray-50 dark:bg-gray-800/50 p-3`,children:d.isLoading||d.isFetching?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-gray-500 dark:text-gray-400`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),` `,n(`archivePurge.previewLoading`)]}):d.isError?(0,G.jsx)(`div`,{className:`text-sm text-red-600 dark:text-red-400`,children:d.error?.message??n(`archivePurge.previewFailed`)}):(0,G.jsxs)(`div`,{className:`text-sm text-gray-900 dark:text-gray-100`,children:[(0,G.jsx)(`div`,{className:`font-medium`,children:n(`archivePurge.previewSummary`,{count:m,size:Ud(h)})}),p?.sample_filenames&&p.sample_filenames.length>0&&(0,G.jsxs)(`ul`,{className:`mt-2 text-xs text-gray-600 dark:text-gray-400 space-y-0.5 list-disc pl-4`,children:[p.sample_filenames.map(e=>(0,G.jsx)(`li`,{className:`truncate`,children:e},e)),m>p.sample_filenames.length&&(0,G.jsx)(`li`,{className:`list-none italic text-gray-500`,children:n(`archivePurge.andMore`,{count:m-p.sample_filenames.length})})]})]})}),(0,G.jsxs)(`label`,{className:`flex gap-2 items-start rounded border border-gray-200 dark:border-gray-700 px-3 py-2 cursor-pointer hover:bg-gray-50 dark:hover:bg-gray-800/50`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:s,onChange:e=>c(e.target.checked),disabled:f.isPending,className:`mt-0.5 shrink-0`}),(0,G.jsxs)(`span`,{className:`text-xs text-gray-700 dark:text-gray-300`,children:[(0,G.jsx)(`span`,{className:`font-medium block mb-0.5`,children:n(`archivePurge.purgeStatsLabel`)}),(0,G.jsx)(`span`,{className:`text-gray-500 dark:text-gray-400`,children:n(`archivePurge.purgeStatsHint`)})]})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 items-start text-xs text-amber-700 dark:text-amber-400 bg-amber-50 dark:bg-amber-900/20 rounded px-3 py-2`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 mt-0.5 shrink-0`}),(0,G.jsx)(`span`,{children:n(`archivePurge.warning`)})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 p-4 border-t border-gray-200 dark:border-gray-700`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:e,disabled:f.isPending,children:n(`common.cancel`)}),(0,G.jsx)(Q,{variant:`danger`,disabled:!g,onClick:()=>f.mutate(),children:f.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin mr-1`}),n(`archivePurge.purging`)]}):n(`archivePurge.confirmCta`,{count:m})})]})]})})}function bAe(e){if(!e||e<=0)return`—`;let t=Math.floor(e/3600),n=Math.floor(e%3600/60);return t>0?`${t}h ${n}m`:`${n}m`}function xAe(e){if(!e)return`—`;let t=ep(e);return t?t.toLocaleString():`—`}function tK({archiveId:e}){let{t}=U(),{data:n,isLoading:r}=K({queryKey:[`archive-runs`,e],queryFn:()=>Z.getArchiveRuns(e)});if(r)return(0,G.jsx)(`div`,{className:`flex justify-center py-4`,children:(0,G.jsx)(Y,{className:`w-5 h-5 text-bambu-gray animate-spin`})});let i=n?.items||[];return i.length===0?(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic py-2`,children:t(`archives.runLog.empty`)}):(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full text-xs`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`text-bambu-gray border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`th`,{className:`text-left py-1.5 pr-2 font-medium`,children:t(`archives.runLog.col.date`)}),(0,G.jsx)(`th`,{className:`text-left py-1.5 pr-2 font-medium`,children:t(`archives.runLog.col.status`)}),(0,G.jsx)(`th`,{className:`text-right py-1.5 pr-2 font-medium`,children:t(`archives.runLog.col.duration`)}),(0,G.jsx)(`th`,{className:`text-right py-1.5 pr-2 font-medium`,children:t(`archives.runLog.col.filament`)}),(0,G.jsx)(`th`,{className:`text-right py-1.5 font-medium`,children:t(`archives.runLog.col.cost`)})]})}),(0,G.jsx)(`tbody`,{children:i.map(e=>{let n=e.status===`completed`?`text-bambu-green`:e.status===`failed`?`text-red-700 dark:text-red-400`:`text-bambu-gray`;return(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/40 last:border-0`,children:[(0,G.jsx)(`td`,{className:`py-1.5 pr-2 text-bambu-gray-light`,children:xAe(e.started_at||e.created_at)}),(0,G.jsxs)(`td`,{className:`py-1.5 pr-2 font-medium ${n}`,children:[t(`archives.runLog.status.${e.status}`,{defaultValue:e.status}),e.failure_reason&&(0,G.jsx)(`span`,{className:`block text-[10px] text-bambu-gray font-normal`,children:t(`editArchive.failureReasons.${e.failure_reason}`,{defaultValue:e.failure_reason})})]}),(0,G.jsx)(`td`,{className:`py-1.5 pr-2 text-right text-bambu-gray-light`,children:bAe(e.duration_seconds)}),(0,G.jsx)(`td`,{className:`py-1.5 pr-2 text-right text-bambu-gray-light`,children:e.filament_used_grams==null?`—`:`${e.filament_used_grams.toFixed(1)} g`}),(0,G.jsx)(`td`,{className:`py-1.5 text-right text-bambu-gray-light`,children:e.cost==null?`—`:e.cost.toFixed(2)})]},e.id)})})]})})}var nK=[`adhesionFailure`,`spaghettiDetached`,`layerShift`,`cloggedNozzle`,`filamentRunout`,`warping`,`stringing`,`underExtrusion`,`powerFailure`,`userCancelled`,`noStatusUpdate`,`other`],SAe=[`completed`,`failed`,`aborted`,`printing`],rK=1e5;function iK({archive:e,onClose:t,existingTags:n=[]}){let{t:r}=U();(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&t()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[t]);let i=co(),[a,o]=(0,y.useState)(e.print_name||``),[s,c]=(0,y.useState)(e.printer_id),[l,u]=(0,y.useState)(e.project_id??null),[d,f]=(0,y.useState)(e.notes||``),[p,m]=(0,y.useState)(e.tags||``),[h,g]=(0,y.useState)(()=>{let t=e.failure_reason||``;return t?nK.includes(t)?t:nK.find(e=>r(`editArchive.failureReasons.${e}`)===t)||t:``}),_=h&&!nK.includes(h)?h:null,[v,b]=(0,y.useState)(e.status),[x,S]=(0,y.useState)(e.quantity??1),[C,w]=(0,y.useState)(e.filament_used_grams==null?``:String(e.filament_used_grams)),[T,E]=(0,y.useState)(e.photos||[]),[D,O]=(0,y.useState)(e.external_url||``),[k,A]=(0,y.useState)(!1),[j,M]=(0,y.useState)(!1),N=(0,y.useRef)(null),P=(0,y.useRef)(null),F=(0,y.useRef)(null),{data:I}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:L}=K({queryKey:[`projects`],queryFn:()=>Z.getProjects(),select:e=>[...e].sort((e,t)=>e.name.localeCompare(t.name))}),R=(0,y.useMemo)(()=>$G(L??[],e.project_id),[L,e.project_id]),{data:z}=K({queryKey:[`tags`],queryFn:Z.getTags,enabled:n.length===0}),B=n.length>0?n:z?.map(e=>e.name)||[],V=p.split(`,`).map(e=>e.trim()).filter(Boolean),ee=p.includes(`,`)?p.substring(p.lastIndexOf(`,`)+1).trim().toLowerCase():p.trim().toLowerCase(),te=B.filter(e=>!V.includes(e)&&(ee===``||e.toLowerCase().includes(ee))),ne=e=>{let t;t=ee&&!B.includes(ee)?p.includes(`,`)?p.substring(0,p.lastIndexOf(`,`)).split(`,`).map(e=>e.trim()).filter(Boolean):[]:V,t.includes(e)||m([...t,e].join(`, `)),F.current!==null&&clearTimeout(F.current),N.current?.focus()},re=e=>{m(V.filter(t=>t!==e).join(`, `))},ie=q({mutationFn:t=>Z.updateArchive(e.id,t),onSuccess:()=>{QG(i),i.invalidateQueries({queryKey:[`archive-runs`,e.id]}),t()}}),ae=async t=>{let n=t.target.files?.[0];if(n){A(!0);try{E((await Z.uploadArchivePhoto(e.id,n)).photos),i.invalidateQueries({queryKey:[`archives`]})}catch(e){console.error(`Failed to upload photo:`,e)}finally{A(!1),P.current&&(P.current.value=``)}}},oe=async t=>{try{E((await Z.deleteArchivePhoto(e.id,t)).photos||[]),i.invalidateQueries({queryKey:[`archives`]})}catch(e){console.error(`Failed to delete photo:`,e)}};return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:t,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-md max-h-[90vh] flex flex-col`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:r(`editArchive.title`)}),(0,G.jsx)(`button`,{onClick:t,className:`text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`form`,{onSubmit:t=>{t.preventDefault();let n={print_name:a||void 0,printer_id:s,project_id:l,notes:d||void 0,tags:p||void 0,quantity:x,external_url:D||null};v!==e.status&&(n.status=v);let r=C.trim(),i=r===``?null:Number(r),o=i!==null&&!Number.isFinite(i),c=i===null?null:Math.min(Math.max(i,0),rK),u=e.filament_used_grams??null;!o&&c!==u&&(n.filament_used_grams=c),v===`failed`||v===`aborted`?n.failure_reason=h||void 0:(e.status===`failed`||e.status===`aborted`)&&(n.failure_reason=null),ie.mutate(n)},className:`p-6 space-y-4 overflow-y-auto flex-1`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`archives.runLog.title`)}),(0,G.jsx)(tK,{archiveId:e.id})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`editArchive.name`)}),(0,G.jsx)(`input`,{type:`text`,value:a,onChange:e=>o(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,placeholder:r(`editArchive.namePlaceholder`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`editArchive.printer`)}),(0,G.jsxs)(`select`,{value:s??``,onChange:e=>c(e.target.value?Number(e.target.value):null),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:``,children:r(`editArchive.noPrinter`)}),I?.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[(0,G.jsx)(gc,{className:`w-4 h-4 inline mr-1`}),r(`editArchive.project`)]}),(0,G.jsxs)(`select`,{value:l??``,onChange:e=>u(e.target.value?Number(e.target.value):null),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:``,children:r(`editArchive.noProject`)}),R.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,htmlFor:`archive-items-printed`,children:[(0,G.jsx)(Pc,{className:`w-4 h-4 inline mr-1`}),r(`editArchive.itemsPrinted`)]}),(0,G.jsx)(`input`,{id:`archive-items-printed`,type:`number`,min:0,value:x,onChange:e=>S(Math.max(0,parseInt(e.target.value)||0)),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,placeholder:`1`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:r(`editArchive.itemsPrintedHelp`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,htmlFor:`archive-filament-grams`,children:[(0,G.jsx)(Yu,{className:`w-4 h-4 inline mr-1`}),r(`editArchive.filamentUsed`)]}),(0,G.jsx)(`input`,{id:`archive-filament-grams`,type:`text`,inputMode:`decimal`,value:C,onChange:e=>{let t=e.target.value.replace(`,`,`.`);(t===``||/^\d*\.?\d*$/.test(t))&&w(t)},onBlur:()=>w(e=>{let t=Number(e);return e===``||!Number.isFinite(t)?``:String(Math.min(t,rK))}),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,placeholder:r(`editArchive.filamentUsedPlaceholder`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:r(`editArchive.filamentUsedHelp`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`editArchive.notes`)}),(0,G.jsx)(`textarea`,{value:d,onChange:e=>f(e.target.value),rows:3,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none resize-none`,placeholder:r(`editArchive.notesPlaceholder`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[(0,G.jsx)(Xc,{className:`w-4 h-4 inline mr-1`}),r(`editArchive.externalLink`)]}),(0,G.jsx)(`input`,{type:`url`,value:D,onChange:e=>O(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,placeholder:`https://printables.com/model/...`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:r(`editArchive.externalLinkHelp`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`editArchive.tags`)}),V.length>0&&(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1.5 mb-2`,children:V.map(e=>(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 px-2 py-0.5 bg-bambu-dark-tertiary rounded text-sm text-white`,children:[(0,G.jsx)(Tu,{className:`w-3 h-3`}),e,(0,G.jsx)(`button`,{type:`button`,onClick:()=>re(e),className:`ml-0.5 text-bambu-gray hover:text-white`,children:(0,G.jsx)(td,{className:`w-3 h-3`})})]},e))}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`input`,{ref:N,type:`text`,value:p,onChange:e=>m(e.target.value),onFocus:()=>{F.current!==null&&clearTimeout(F.current),M(!0)},onBlur:()=>{F.current=window.setTimeout(()=>M(!1),200)},className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,placeholder:V.length>0?r(`editArchive.addMoreTags`):r(`editArchive.tagsPlaceholder`)}),j&&te.length>0&&(0,G.jsxs)(`div`,{className:`absolute top-full left-0 right-0 mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg z-10 max-h-40 overflow-y-auto`,children:[(0,G.jsxs)(`div`,{className:`p-2 text-xs text-bambu-gray border-b border-bambu-dark-tertiary`,children:[ee?r(`editArchive.matchingTags`,{query:ee}):r(`editArchive.existingTags`),` `,r(`editArchive.clickToAdd`)]}),(0,G.jsx)(`div`,{className:`p-2 flex flex-wrap gap-1.5`,children:te.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>ne(e),className:`px-2 py-0.5 bg-bambu-dark-tertiary hover:bg-bambu-green/20 rounded text-sm text-bambu-gray hover:text-white transition-colors`,children:e},e))})]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`editArchive.status`)}),(0,G.jsx)(`select`,{value:v,onChange:e=>{b(e.target.value),e.target.value===`completed`&&g(``)},className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:SAe.map(e=>(0,G.jsx)(`option`,{value:e,children:r(`editArchive.statuses.${e}`)},e))})]}),(v===`failed`||v===`aborted`)&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`failure-reason-select`,className:`block text-sm text-bambu-gray mb-1`,children:r(`editArchive.failureReason`)}),(0,G.jsxs)(`select`,{id:`failure-reason-select`,value:h,onChange:e=>g(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:``,children:r(`editArchive.selectReason`)}),nK.map(e=>(0,G.jsx)(`option`,{value:e,children:r(`editArchive.failureReasons.${e}`)},e)),_&&(0,G.jsx)(`option`,{value:_,children:_})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[(0,G.jsx)(ss,{className:`w-4 h-4 inline mr-1`}),r(`editArchive.photos`)]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-2 mb-2`,children:[T.map(t=>(0,G.jsxs)(`div`,{className:`relative group`,children:[(0,G.jsx)(`img`,{src:Z.getArchivePhotoUrl(e.id,t),alt:r(`editArchive.printResult`),className:`w-20 h-20 object-cover rounded-lg border border-bambu-dark-tertiary`}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>oe(t),className:`absolute -top-1 -right-1 p-1 bg-red-500 rounded-full can-hover:opacity-0 group-hover:opacity-100 focus-visible:opacity-100 transition-opacity`,children:(0,G.jsx)(Nu,{className:`w-3 h-3 text-white`})})]},t)),(0,G.jsxs)(`label`,{className:`w-20 h-20 flex items-center justify-center border-2 border-dashed border-bambu-dark-tertiary rounded-lg cursor-pointer hover:border-bambu-green transition-colors`,children:[(0,G.jsx)(`input`,{ref:P,type:`file`,accept:`image/jpeg,image/png,image/webp`,onChange:ae,className:`hidden`,disabled:k}),k?(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-gray animate-spin`}):(0,G.jsx)(Pl,{className:`w-6 h-6 text-bambu-gray`})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:r(`editArchive.photosHelp`)})]}),(0,G.jsxs)(`div`,{className:`flex gap-3 pt-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:t,className:`flex-1`,children:r(`common.cancel`)}),(0,G.jsxs)(Q,{type:`submit`,disabled:ie.isPending,className:`flex-1`,children:[(0,G.jsx)(Kl,{className:`w-4 h-4`}),ie.isPending?r(`common.saving`):r(`common.save`)]})]})]})]})})}function aK({archiveId:e,archiveName:t,onClose:n}){let{t:r}=U();return(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&n()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[n]),(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:n,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-2xl max-h-[85vh] flex flex-col`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 min-w-0`,children:[(0,G.jsx)(Rc,{className:`w-5 h-5 text-bambu-green flex-shrink-0`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white truncate`,title:t||``,children:r(`archives.runLog.modalTitle`,{name:t||r(`archives.runLog.modalTitleFallback`)})})]}),(0,G.jsx)(`button`,{onClick:n,className:`text-bambu-gray hover:text-white transition-colors`,title:r(`common.close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(`div`,{className:`p-6 overflow-y-auto flex-1`,children:(0,G.jsx)(tK,{archiveId:e})})]})})}function oK({isOpen:e,onClose:t,columns:n,defaultColumns:r,onSave:i}){let{t:a}=U(),[o,s]=(0,y.useState)(n),[c,l]=(0,y.useState)(null),u=(0,y.useRef)(null);if((0,y.useEffect)(()=>{e&&s(n.map(e=>({...e})))},[e,n]),(0,y.useEffect)(()=>{if(!e)return;let n=e=>{e.key===`Escape`&&t()};return window.addEventListener(`keydown`,n),()=>window.removeEventListener(`keydown`,n)},[e,t]),!e)return null;let d=e=>{s(t=>t.map((t,n)=>n===e?{...t,visible:!t.visible}:t))},f=(e,t)=>{t<0||t>=o.length||s(n=>{let r=[...n],[i]=r.splice(e,1);return r.splice(t,0,i),r})},p=(e,t)=>{u.current=t,l(t),e.dataTransfer.effectAllowed=`move`},m=(e,t)=>{e.preventDefault(),e.dataTransfer.dropEffect=`move`;let n=u.current;n!==null&&n!==t&&(f(n,t),u.current=t,l(t))},h=e=>{e.preventDefault()},g=()=>{u.current=null,l(null)},_=()=>{s(r.map(e=>({...e})))},v=()=>{i(o),t()},b=o.filter(e=>e.visible).length;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,onClick:t,children:(0,G.jsx)(Ld,{className:`w-full max-w-md max-h-[80vh] flex flex-col`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(zd,{className:`p-6 flex flex-col min-h-0`,children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white mb-2`,children:a(`inventory.configureColumns`)}),(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray mb-4`,children:[a(`inventory.configureColumnsDesc`),(0,G.jsxs)(`span`,{className:`ml-2 text-bambu-gray/60`,children:[`(`,b,` `,a(`inventory.of`),` `,o.length,` `,a(`inventory.visible`),`)`]})]}),(0,G.jsx)(`div`,{className:`space-y-1 overflow-y-auto flex-1 min-h-0 pr-1`,children:o.map((e,t)=>(0,G.jsxs)(`div`,{className:`flex items-center gap-2 p-2 rounded-lg border transition-colors ${c===t?`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary bg-bambu-dark-tertiary/50`} ${e.visible?``:`opacity-50`}`,draggable:!0,onDragStart:e=>p(e,t),onDragOver:e=>m(e,t),onDrop:h,onDragEnd:g,children:[(0,G.jsx)(`div`,{className:`cursor-grab text-bambu-gray/50 hover:text-bambu-gray`,children:(0,G.jsx)(Ac,{className:`w-4 h-4`})}),(0,G.jsx)(`span`,{className:`flex-1 font-medium text-sm text-white`,children:e.label}),(0,G.jsxs)(`div`,{className:`flex items-center gap-0.5`,children:[(0,G.jsx)(`button`,{onClick:()=>f(t,t-1),disabled:t===0,className:`p-1 rounded text-bambu-gray hover:bg-bambu-dark-secondary disabled:opacity-30 disabled:cursor-not-allowed`,title:a(`inventory.moveUp`),children:(0,G.jsx)(gs,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>f(t,t+1),disabled:t===o.length-1,className:`p-1 rounded text-bambu-gray hover:bg-bambu-dark-secondary disabled:opacity-30 disabled:cursor-not-allowed`,title:a(`inventory.moveDown`),children:(0,G.jsx)(ps,{className:`w-4 h-4`})})]}),(0,G.jsx)(`button`,{onClick:()=>d(t),className:`p-1.5 rounded transition-colors ${e.visible?`text-bambu-green hover:bg-bambu-green/10`:`text-bambu-gray/50 hover:bg-bambu-dark-secondary`}`,title:e.visible?a(`inventory.hideColumn`):a(`inventory.showColumn`),children:e.visible?(0,G.jsx)(ic,{className:`w-4 h-4`}):(0,G.jsx)(rc,{className:`w-4 h-4`})})]},e.id))}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mt-4 pt-4 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:_,className:`mr-auto`,children:[(0,G.jsx)(Ul,{className:`w-4 h-4`}),a(`inventory.reset`)]}),(0,G.jsx)(Q,{variant:`secondary`,onClick:t,children:a(`inventory.cancel`)}),(0,G.jsx)(Q,{onClick:v,children:a(`inventory.applyChanges`)})]})]})})})}function CAe({selectedIds:e,existingTags:t,onClose:n}){let r=co(),{showToast:i}=Gd(),[a,o]=(0,y.useState)(``),[s,c]=(0,y.useState)(new Set),[l,u]=(0,y.useState)(`add`);(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&n()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[n]);let d=q({mutationFn:async()=>{let t=Array.from(s),n=0;for(let r of e)try{let e=await Z.getArchive(r),i=e.tags?e.tags.split(`,`).map(e=>e.trim()).filter(Boolean):[],a;a=l===`add`?[...new Set([...i,...t])]:i.filter(e=>!s.has(e)),await Z.updateArchive(r,{tags:a.join(`, `)}),n++}catch(e){throw console.error(`Failed to update archive ${r}:`,e),Error(`Failed on archive ${r}: ${e instanceof Error?e.message:`Unknown error`}`)}return{count:n,mode:l,tags:t}},onSuccess:({count:e,mode:t,tags:a})=>{r.invalidateQueries({queryKey:[`archives`]}),i(`${t===`add`?`Added`:`Removed`} ${a.length} tag${a.length===1?``:`s`} ${t===`add`?`to`:`from`} ${e} archive${e===1?``:`s`}`),n()},onError:e=>{i(e.message||`Failed to update tags`,`error`)}}),f=e=>{c(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},p=()=>{a.trim()&&!s.has(a.trim())&&(c(e=>new Set([...e,a.trim()])),o(``))};return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,children:(0,G.jsx)(Ld,{className:`w-full max-w-md`,children:(0,G.jsxs)(zd,{className:`p-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Tu,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-xl font-semibold text-white`,children:l===`add`?`Add Tags`:`Remove Tags`})]}),(0,G.jsx)(`button`,{onClick:n,className:`text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-4`,children:[(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[l===`add`?`Add`:`Remove`,` tags for `,e.length,` selected archive`,e.length===1?``:`s`]}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Q,{size:`sm`,variant:l===`add`?`primary`:`secondary`,onClick:()=>u(`add`),children:`Add Tags`}),(0,G.jsx)(Q,{size:`sm`,variant:l===`remove`?`primary`:`secondary`,onClick:()=>u(`remove`),children:`Remove Tags`})]}),l===`add`&&(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`input`,{type:`text`,placeholder:`Enter new tag...`,className:`flex-1 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,value:a,onChange:e=>o(e.target.value),onKeyDown:e=>{e.key===`Enter`&&(e.preventDefault(),p())}}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:p,disabled:!a.trim(),children:(0,G.jsx)(Pl,{className:`w-4 h-4`})})]}),t.length>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:`Existing tags:`}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-2`,children:t.map(e=>(0,G.jsx)(`button`,{onClick:()=>f(e),className:`px-2 py-1 rounded text-sm transition-colors ${s.has(e)?`bg-bambu-green text-white`:`bg-bambu-dark-tertiary text-bambu-gray-light hover:bg-bambu-dark`}`,children:e},e))})]}),s.size>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:[`Tags to `,l===`add`?`add`:`remove`,`:`]}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-2`,children:Array.from(s).map(e=>(0,G.jsxs)(`span`,{className:`px-2 py-1 rounded text-sm flex items-center gap-1 ${l===`add`?`bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-400`:`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`}`,children:[e,(0,G.jsx)(`button`,{onClick:()=>f(e),className:`hover:opacity-70`,children:(0,G.jsx)(td,{className:`w-3 h-3`})})]},e))})]})]}),(0,G.jsxs)(`div`,{className:`flex gap-3 p-4 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:n,className:`flex-1`,children:`Cancel`}),(0,G.jsx)(Q,{onClick:()=>d.mutate(),disabled:s.size===0||d.isPending,className:`flex-1`,children:d.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),`Processing...`]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Tu,{className:`w-4 h-4`}),l===`add`?`Add Tags`:`Remove Tags`]})})]})]})})})}function wAe({selectedIds:e,onClose:t}){let{t:n}=U(),r=co(),{showToast:i}=Gd(),[a,o]=(0,y.useState)(``),{data:s,isLoading:c}=K({queryKey:[`projects`],queryFn:()=>Z.getProjects()}),l=(0,y.useMemo)(()=>s?$G([...s].sort((e,t)=>e.name.localeCompare(t.name))):void 0,[s]),u=a.trim().toLowerCase(),d=u?l?.filter(e=>e.name.toLowerCase().includes(u)):l,f=(l?.length??0)>5;(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&t()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[t]);let p=()=>QG(r),m=q({mutationFn:async t=>(await Z.addArchivesToProject(t,e),t),onSuccess:n=>{let r=s?.find(e=>e.id===n);p(),i(`Added ${e.length} archive${e.length===1?``:`s`} to "${r?.name}"`),t()},onError:()=>{i(`Failed to assign project`,`error`)}}),h=q({mutationFn:async()=>{for(let t of e)await Z.updateArchive(t,{project_id:null});return e.length},onSuccess:e=>{p(),i(`Removed ${e} archive${e===1?``:`s`} from project`),t()},onError:()=>{i(`Failed to remove from project`,`error`)}}),g=m.isPending||h.isPending;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,children:(0,G.jsx)(Ld,{className:`w-full max-w-md max-h-[80vh] flex flex-col`,children:(0,G.jsxs)(zd,{className:`p-0 flex flex-col min-h-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary shrink-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(gc,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-xl font-semibold text-white`,children:`Assign to Project`})]}),(0,G.jsx)(`button`,{onClick:t,className:`text-bambu-gray hover:text-white transition-colors`,disabled:g,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-3 overflow-y-auto min-h-0`,children:[(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[`Assign `,e.length,` selected archive`,e.length===1?``:`s`,` to a project`]}),c?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin text-bambu-gray`})}):(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`button`,{onClick:()=>h.mutate(),disabled:g,className:`w-full flex items-center gap-3 p-3 rounded-lg bg-bambu-dark hover:bg-bambu-dark-tertiary border border-bambu-dark-tertiary transition-colors text-left disabled:opacity-50`,children:[(0,G.jsx)(`div`,{className:`w-8 h-8 rounded-full bg-red-500/20 flex items-center justify-center shrink-0`,children:(0,G.jsx)(Ds,{className:`w-4 h-4 text-red-600 dark:text-red-400`})}),(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:`Remove from project`}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray truncate`,children:`Clear project assignment`})]}),h.isPending&&(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin text-bambu-gray shrink-0`})]}),l&&l.length>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 py-2`,children:[(0,G.jsx)(`div`,{className:`flex-1 h-px bg-bambu-dark-tertiary`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`or assign to`}),(0,G.jsx)(`div`,{className:`flex-1 h-px bg-bambu-dark-tertiary`})]}),f&&(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`}),(0,G.jsx)(`input`,{type:`text`,value:a,onChange:e=>o(e.target.value),placeholder:n(`archives.menu.searchProjects`),className:`w-full pl-9 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray text-sm focus:border-bambu-green focus:outline-none`})]}),d?.map(e=>(0,G.jsxs)(`button`,{onClick:()=>m.mutate(e.id),disabled:g,className:`w-full flex items-center gap-3 p-3 rounded-lg bg-bambu-dark hover:bg-bambu-dark-tertiary border border-bambu-dark-tertiary transition-colors text-left disabled:opacity-50`,children:[(0,G.jsx)(`div`,{className:`w-8 h-8 rounded-full flex items-center justify-center shrink-0`,style:{backgroundColor:e.color?`${e.color}20`:`rgb(var(--bambu-green) / 0.2)`},children:(0,G.jsx)(gc,{className:`w-4 h-4`,style:{color:e.color||`rgb(var(--bambu-green))`}})}),(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium truncate`,children:e.name}),(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray truncate`,children:[e.archive_count,` archive`,e.archive_count===1?``:`s`,e.status&&` • ${e.status}`]})]}),m.isPending&&m.variables===e.id&&(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin text-bambu-gray shrink-0`})]},e.id)),(!l||l.length===0)&&(0,G.jsx)(`p`,{className:`text-center text-bambu-gray py-4`,children:`No projects yet. Create one from the Projects page.`}),l&&l.length>0&&d?.length===0&&(0,G.jsx)(`p`,{className:`text-center text-bambu-gray text-sm py-4`,children:`—`})]})]}),(0,G.jsx)(`div`,{className:`flex gap-3 p-4 border-t border-bambu-dark-tertiary shrink-0`,children:(0,G.jsx)(Q,{variant:`secondary`,onClick:t,className:`flex-1`,disabled:g,children:`Cancel`})})]})})})}function TAe(e,t){return new Date(e,t+1,0).getDate()}function EAe(e,t){return new Date(e,t,1).getDay()}var DAe=[`January`,`February`,`March`,`April`,`May`,`June`,`July`,`August`,`September`,`October`,`November`,`December`],OAe=[`Sun`,`Mon`,`Tue`,`Wed`,`Thu`,`Fri`,`Sat`];function kAe({archives:e,onArchiveClick:t,highlightedArchiveId:n}){let r=new Date,[i,a]=(0,y.useState)(r.getMonth()),[o,s]=(0,y.useState)(r.getFullYear()),[c,l]=(0,y.useState)(null),[u,d]=(0,y.useState)(null),f=(0,y.useMemo)(()=>{let t=new Map;return e.forEach(e=>{let n=ep(e.completed_at||e.created_at)||new Date,r=`${n.getFullYear()}-${String(n.getMonth()+1).padStart(2,`0`)}-${String(n.getDate()).padStart(2,`0`)}`,i=t.get(r)||[];i.push(e),t.set(r,i)}),t},[e]),p=TAe(o,i),m=EAe(o,i),h=()=>{i===0?(a(11),s(o-1)):a(i-1)},g=()=>{i===11?(a(0),s(o+1)):a(i+1)},_=()=>{a(r.getMonth()),s(r.getFullYear())},v=[];for(let e=0;e<m;e++)v.push(null);for(let e=1;e<=p;e++)v.push(e);let b=c&&f.get(c)||[],x=e=>{e!==c&&d(null),l(e)};return(0,G.jsxs)(`div`,{className:`flex flex-col lg:flex-row gap-6`,children:[(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-4`,children:[(0,G.jsx)(`button`,{onClick:h,className:`p-2 hover:bg-bambu-dark-tertiary rounded-lg transition-colors`,children:(0,G.jsx)(hs,{className:`w-5 h-5 text-bambu-gray`})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white`,children:[DAe[i],` `,o]}),(0,G.jsx)(`button`,{onClick:_,className:`px-2 py-1 text-xs bg-bambu-dark-tertiary hover:bg-bambu-green/20 text-bambu-gray hover:text-white rounded transition-colors`,children:`Today`})]}),(0,G.jsx)(`button`,{onClick:g,className:`p-2 hover:bg-bambu-dark-tertiary rounded-lg transition-colors`,children:(0,G.jsx)(ms,{className:`w-5 h-5 text-bambu-gray`})})]}),(0,G.jsx)(`div`,{className:`grid grid-cols-7 gap-1 mb-1`,children:OAe.map(e=>(0,G.jsx)(`div`,{className:`text-center text-xs text-bambu-gray py-2`,children:e},e))}),(0,G.jsx)(`div`,{className:`grid grid-cols-7 gap-1`,children:v.map((e,t)=>{if(e===null)return(0,G.jsx)(`div`,{className:`aspect-square`},`empty-${t}`);let n=`${o}-${String(i+1).padStart(2,`0`)}-${String(e).padStart(2,`0`)}`,a=f.get(n)||[],s=a.length>0,l=e===r.getDate()&&i===r.getMonth()&&o===r.getFullYear(),u=n===c,d=a.filter(e=>e.status===`completed`).length,p=a.filter(e=>e.status===`failed`).length;return(0,G.jsxs)(`button`,{onClick:()=>x(u?null:n),className:`aspect-square rounded-lg p-1 flex flex-col items-center justify-center transition-colors relative ${u?`bg-bambu-green text-white`:l?`bg-bambu-green/20 text-white ring-2 ring-bambu-green`:s?`bg-bambu-dark-tertiary hover:bg-bambu-dark-tertiary/70 text-white`:`hover:bg-bambu-dark-tertiary/50 text-bambu-gray`}`,children:[(0,G.jsx)(`span`,{className:`text-sm font-medium ${l&&!u?`text-bambu-green`:``}`,children:e}),s&&(0,G.jsxs)(`div`,{className:`absolute bottom-1 left-1/2 -translate-x-1/2 flex items-center gap-1`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full ${p>0&&d===0?`bg-red-400`:p>0?`bg-yellow-400`:`bg-green-400`}`}),(0,G.jsx)(`span`,{className:`text-xs font-medium`,children:a.length})]})]},e)})}),(0,G.jsx)(`div`,{className:`mt-4 pt-4 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`grid grid-cols-3 gap-4 text-center`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-2xl font-bold text-white`,children:e.filter(e=>{let t=ep(e.completed_at||e.created_at)||new Date;return t.getMonth()===i&&t.getFullYear()===o}).length}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray`,children:`Prints this month`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-2xl font-bold text-green-700 dark:text-green-400`,children:e.filter(e=>{let t=ep(e.completed_at||e.created_at)||new Date;return t.getMonth()===i&&t.getFullYear()===o&&e.status===`completed`}).length}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray`,children:`Successful`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-2xl font-bold text-red-700 dark:text-red-400`,children:e.filter(e=>{let t=ep(e.completed_at||e.created_at)||new Date;return t.getMonth()===i&&t.getFullYear()===o&&e.status===`failed`}).length}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray`,children:`Failed`})]})]})})]}),(0,G.jsx)(`div`,{className:`lg:w-80 bg-bambu-dark rounded-xl p-4`,children:c?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-bambu-gray mb-3`,children:new Date(c+`T12:00:00`).toLocaleDateString(`en-US`,{weekday:`long`,month:`long`,day:`numeric`,year:`numeric`})}),b.length>0?(0,G.jsx)(`div`,{className:`calendar-scroll space-y-2 max-h-96 overflow-y-auto`,children:b.map(e=>{let r=e.id===u||e.id===n;return(0,G.jsxs)(`button`,{onClick:()=>{d(e.id),t?.(e)},className:`w-full flex items-center gap-3 p-2 rounded-lg transition-colors text-left ${r?``:`hover:bg-bambu-dark-tertiary`}`,style:r?{outline:`4px solid #facc15`,outlineOffset:`2px`}:void 0,children:[e.thumbnail_path?(0,G.jsx)(`img`,{src:Z.getArchiveThumbnail(e.id),alt:``,className:`w-12 h-12 rounded object-cover`}):(0,G.jsx)(`div`,{className:`w-12 h-12 rounded bg-bambu-dark-tertiary flex items-center justify-center`,children:(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`3MF`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white truncate`,children:e.print_name||e.filename}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-xs`,children:[(0,G.jsx)(`span`,{className:e.status===`failed`?`text-red-700 dark:text-red-400`:`text-green-700 dark:text-green-400`,children:e.status===`failed`?`Failed`:`Completed`}),e.filament_color&&(0,G.jsx)(`div`,{className:`flex gap-0.5`,children:e.filament_color.split(`,`).map((e,t)=>(0,G.jsx)(`div`,{className:`w-3 h-3 rounded-full border border-black/20`,style:{backgroundColor:e}},t))})]})]})]},e.id)})}):(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:`No prints on this day`})]}):(0,G.jsx)(`div`,{className:`text-center py-8`,children:(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:`Select a day to see prints`})})})]})}function sK({archiveId:e,archiveName:t,onClose:n}){let r=Z.getArchiveQRCodeUrl(e,300);return(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&n()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[n]),(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:n,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-sm`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:`QR Code`}),(0,G.jsx)(`button`,{onClick:n,className:`text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-6 flex flex-col items-center`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4 text-center truncate max-w-full`,children:t}),(0,G.jsx)(`div`,{className:`bg-white p-4 rounded-lg mb-4`,children:(0,G.jsx)(`img`,{src:r,alt:`QR Code`,className:`w-64 h-64`})}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-4 text-center`,children:`Scan to open this archive`}),(0,G.jsxs)(Q,{onClick:()=>{let e=document.createElement(`a`);e.href=r,e.download=`${t}_qrcode.png`,e.click()},className:`w-full`,children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),`Download QR Code`]})]})]})})}function cK({archiveId:e,archiveName:t,photos:n,onClose:r,onDelete:i}){let[a,o]=(0,y.useState)(0),[s,c]=(0,y.useState)(!1);if((0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&r(),e.key===`ArrowLeft`&&o(e=>Math.max(0,e-1)),e.key===`ArrowRight`&&o(e=>Math.min(n.length-1,e+1))};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[r,n.length]),(0,y.useEffect)(()=>{a>=n.length&&o(Math.max(0,n.length-1))},[n.length,a]),n.length===0)return r(),null;let l=n[a],u=Z.getArchivePhotoUrl(e,l);return(0,G.jsxs)(`div`,{className:`fixed inset-0 bg-black/90 flex items-center justify-center z-50`,onClick:r,children:[(0,G.jsxs)(`div`,{className:`relative w-full h-full flex flex-col`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 bg-black/50`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:t}),(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[`Photo `,a+1,` of `,n.length]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>{let e=document.createElement(`a`);e.href=u,e.download=`${t}_photo_${a+1}.jpg`,e.click()},children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),`Download`]}),i&&(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>{i&&c(!0)},className:`text-red-400 hover:text-red-300`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:r,className:`p-2 text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-6 h-6`})})]})]}),(0,G.jsxs)(`div`,{className:`flex-1 min-h-0 flex items-center justify-center p-4 relative overflow-hidden`,children:[a>0&&(0,G.jsx)(`button`,{onClick:()=>o(e=>e-1),className:`absolute left-4 z-10 p-3 bg-black/50 hover:bg-black/70 rounded-full transition-colors`,children:(0,G.jsx)(hs,{className:`w-8 h-8 text-white`})}),(0,G.jsx)(`img`,{src:u,alt:`Photo ${a+1}`,className:`max-w-full max-h-full object-contain rounded-lg`,style:{maxHeight:`calc(100vh - 200px)`}}),a<n.length-1&&(0,G.jsx)(`button`,{onClick:()=>o(e=>e+1),className:`absolute right-4 z-10 p-3 bg-black/50 hover:bg-black/70 rounded-full transition-colors`,children:(0,G.jsx)(ms,{className:`w-8 h-8 text-white`})})]}),n.length>1&&(0,G.jsx)(`div`,{className:`flex justify-center gap-2 p-4 bg-black/50`,children:n.map((t,n)=>(0,G.jsx)(`button`,{onClick:()=>o(n),className:`w-16 h-16 rounded-lg overflow-hidden border-2 transition-colors ${n===a?`border-bambu-green`:`border-transparent hover:border-bambu-gray`}`,children:(0,G.jsx)(`img`,{src:Z.getArchivePhotoUrl(e,t),alt:`Thumbnail ${n+1}`,className:`w-full h-full object-cover`})},t))})]}),s&&(0,G.jsx)(rf,{title:`Delete Photo`,message:`Delete this photo? This cannot be undone.`,confirmText:`Delete`,variant:`danger`,onConfirm:()=>{i?.(l),c(!1)},onCancel:()=>c(!1)})]})}function lK(e,t){(t==null||t>e.length)&&(t=e.length);for(var n=0,r=Array(t);n<t;n++)r[n]=e[n];return r}function AAe(e){if(Array.isArray(e))return e}function jAe(e,t){var n=e==null?null:typeof Symbol<`u`&&e[Symbol.iterator]||e[`@@iterator`];if(n!=null){var r,i,a,o,s=[],c=!0,l=!1;try{if(a=(n=n.call(e)).next,t!==0)for(;!(c=(r=a.call(n)).done)&&(s.push(r.value),s.length!==t);c=!0);}catch(e){l=!0,i=e}finally{try{if(!c&&n.return!=null&&(o=n.return(),Object(o)!==o))return}finally{if(l)throw i}}return s}}function MAe(){throw TypeError(`Invalid attempt to destructure non-iterable instance.
-In order to be iterable, non-array objects must have a [Symbol.iterator]() method.`)}function NAe(e,t){return AAe(e)||jAe(e,t)||PAe(e,t)||MAe()}function PAe(e,t){if(e){if(typeof e==`string`)return lK(e,t);var n={}.toString.call(e).slice(8,-1);return n===`Object`&&e.constructor&&(n=e.constructor.name),n===`Map`||n===`Set`?Array.from(e):n===`Arguments`||/^(?:Ui|I)nt(?:8|16|32)(?:Clamped)?Array$/.test(n)?lK(e,t):void 0}}var uK=Object.entries,dK=Object.setPrototypeOf,FAe=Object.isFrozen,IAe=Object.getPrototypeOf,LAe=Object.getOwnPropertyDescriptor,fK=Object.freeze,pK=Object.seal,mK=Object.create,hK=typeof Reflect<`u`&&Reflect,gK=hK.apply,_K=hK.construct;fK||=function(e){return e},pK||=function(e){return e},gK||=function(e,t){var n=[...arguments].slice(2);return e.apply(t,n)},_K||=function(e){return new e(...[...arguments].slice(1))};var vK=NK(Array.prototype.forEach),RAe=NK(Array.prototype.lastIndexOf),yK=NK(Array.prototype.pop),bK=NK(Array.prototype.push),zAe=NK(Array.prototype.splice),xK=Array.isArray,SK=NK(String.prototype.toLowerCase),CK=NK(String.prototype.toString),wK=NK(String.prototype.match),TK=NK(String.prototype.replace),EK=NK(String.prototype.indexOf),BAe=NK(String.prototype.trim),VAe=NK(Number.prototype.toString),HAe=NK(Boolean.prototype.toString),DK=typeof BigInt>`u`?null:NK(BigInt.prototype.toString),OK=typeof Symbol>`u`?null:NK(Symbol.prototype.toString),kK=NK(Object.prototype.hasOwnProperty),AK=NK(Object.prototype.toString),jK=NK(RegExp.prototype.test),MK=UAe(TypeError);function NK(e){return function(t){t instanceof RegExp&&(t.lastIndex=0);var n=[...arguments].slice(1);return gK(e,t,n)}}function UAe(e){return function(){return _K(e,[...arguments])}}function PK(e,t){let n=arguments.length>2&&arguments[2]!==void 0?arguments[2]:SK;if(dK&&dK(e,null),!xK(t))return e;let r=t.length;for(;r--;){let i=t[r];if(typeof i==`string`){let e=n(i);e!==i&&(FAe(t)||(t[r]=e),i=e)}e[i]=!0}return e}function WAe(e){for(let t=0;t<e.length;t++)kK(e,t)||(e[t]=null);return e}function FK(e){let t=mK(null);for(let r of uK(e)){var n=NAe(r,2);let i=n[0],a=n[1];kK(e,i)&&(xK(a)?t[i]=WAe(a):a&&typeof a==`object`&&a.constructor===Object?t[i]=FK(a):t[i]=a)}return t}function GAe(e){switch(typeof e){case`string`:return e;case`number`:return VAe(e);case`boolean`:return HAe(e);case`bigint`:return DK?DK(e):`0`;case`symbol`:return OK?OK(e):`Symbol()`;case`undefined`:return AK(e);case`function`:case`object`:{if(e===null)return AK(e);let t=e,n=IK(t,`toString`);if(typeof n==`function`){let e=n(t);return typeof e==`string`?e:AK(e)}return AK(e)}default:return AK(e)}}function IK(e,t){for(;e!==null;){let n=LAe(e,t);if(n){if(n.get)return NK(n.get);if(typeof n.value==`function`)return NK(n.value)}e=IAe(e)}function n(){return null}return n}function KAe(e){try{return jK(e,``),!0}catch{return!1}}var LK=fK(`a.abbr.acronym.address.area.article.aside.audio.b.bdi.bdo.big.blink.blockquote.body.br.button.canvas.caption.center.cite.code.col.colgroup.content.data.datalist.dd.decorator.del.details.dfn.dialog.dir.div.dl.dt.element.em.fieldset.figcaption.figure.font.footer.form.h1.h2.h3.h4.h5.h6.head.header.hgroup.hr.html.i.img.input.ins.kbd.label.legend.li.main.map.mark.marquee.menu.menuitem.meter.nav.nobr.ol.optgroup.option.output.p.picture.pre.progress.q.rp.rt.ruby.s.samp.search.section.select.shadow.slot.small.source.spacer.span.strike.strong.style.sub.summary.sup.table.tbody.td.template.textarea.tfoot.th.thead.time.tr.track.tt.u.ul.var.video.wbr`.split(`.`)),RK=fK(`svg.a.altglyph.altglyphdef.altglyphitem.animatecolor.animatemotion.animatetransform.circle.clippath.defs.desc.ellipse.enterkeyhint.exportparts.filter.font.g.glyph.glyphref.hkern.image.inputmode.line.lineargradient.marker.mask.metadata.mpath.part.path.pattern.polygon.polyline.radialgradient.rect.stop.style.switch.symbol.text.textpath.title.tref.tspan.view.vkern`.split(`.`)),zK=fK([`feBlend`,`feColorMatrix`,`feComponentTransfer`,`feComposite`,`feConvolveMatrix`,`feDiffuseLighting`,`feDisplacementMap`,`feDistantLight`,`feDropShadow`,`feFlood`,`feFuncA`,`feFuncB`,`feFuncG`,`feFuncR`,`feGaussianBlur`,`feImage`,`feMerge`,`feMergeNode`,`feMorphology`,`feOffset`,`fePointLight`,`feSpecularLighting`,`feSpotLight`,`feTile`,`feTurbulence`]),qAe=fK([`animate`,`color-profile`,`cursor`,`discard`,`font-face`,`font-face-format`,`font-face-name`,`font-face-src`,`font-face-uri`,`foreignobject`,`hatch`,`hatchpath`,`mesh`,`meshgradient`,`meshpatch`,`meshrow`,`missing-glyph`,`script`,`set`,`solidcolor`,`unknown`,`use`]),BK=fK(`math.menclose.merror.mfenced.mfrac.mglyph.mi.mlabeledtr.mmultiscripts.mn.mo.mover.mpadded.mphantom.mroot.mrow.ms.mspace.msqrt.mstyle.msub.msup.msubsup.mtable.mtd.mtext.mtr.munder.munderover.mprescripts`.split(`.`)),JAe=fK([`maction`,`maligngroup`,`malignmark`,`mlongdiv`,`mscarries`,`mscarry`,`msgroup`,`mstack`,`msline`,`msrow`,`semantics`,`annotation`,`annotation-xml`,`mprescripts`,`none`]),VK=fK([`#text`]),HK=fK(`accept.action.align.alt.autocapitalize.autocomplete.autopictureinpicture.autoplay.background.bgcolor.border.capture.cellpadding.cellspacing.checked.cite.class.clear.color.cols.colspan.command.commandfor.controls.controlslist.coords.crossorigin.datetime.decoding.default.dir.disabled.disablepictureinpicture.disableremoteplayback.download.draggable.enctype.enterkeyhint.exportparts.face.for.headers.height.hidden.high.href.hreflang.id.inert.inputmode.integrity.ismap.kind.label.lang.list.loading.loop.low.max.maxlength.media.method.min.minlength.multiple.muted.name.nonce.noshade.novalidate.nowrap.open.optimum.part.pattern.placeholder.playsinline.popover.popovertarget.popovertargetaction.poster.preload.pubdate.radiogroup.readonly.rel.required.rev.reversed.role.rows.rowspan.spellcheck.scope.selected.shape.size.sizes.slot.span.srclang.start.src.srcset.step.style.summary.tabindex.title.translate.type.usemap.valign.value.width.wrap.xmlns`.split(`.`)),UK=fK(`accent-height.accumulate.additive.alignment-baseline.amplitude.ascent.attributename.attributetype.azimuth.basefrequency.baseline-shift.begin.bias.by.class.clip.clippathunits.clip-path.clip-rule.color.color-interpolation.color-interpolation-filters.color-profile.color-rendering.cx.cy.d.dx.dy.diffuseconstant.direction.display.divisor.dominant-baseline.dur.edgemode.elevation.end.exponent.fill.fill-opacity.fill-rule.filter.filterunits.flood-color.flood-opacity.font-family.font-size.font-size-adjust.font-stretch.font-style.font-variant.font-weight.fx.fy.g1.g2.glyph-name.glyphref.gradientunits.gradienttransform.height.href.id.image-rendering.in.in2.intercept.k.k1.k2.k3.k4.kerning.keypoints.keysplines.keytimes.lang.lengthadjust.letter-spacing.kernelmatrix.kernelunitlength.lighting-color.local.marker-end.marker-mid.marker-start.markerheight.markerunits.markerwidth.maskcontentunits.maskunits.max.mask.mask-type.media.method.mode.min.name.numoctaves.offset.operator.opacity.order.orient.orientation.origin.overflow.paint-order.path.pathlength.patterncontentunits.patterntransform.patternunits.points.preservealpha.preserveaspectratio.primitiveunits.r.rx.ry.radius.refx.refy.repeatcount.repeatdur.restart.result.rotate.scale.seed.shape-rendering.slope.specularconstant.specularexponent.spreadmethod.startoffset.stddeviation.stitchtiles.stop-color.stop-opacity.stroke-dasharray.stroke-dashoffset.stroke-linecap.stroke-linejoin.stroke-miterlimit.stroke-opacity.stroke.stroke-width.style.surfacescale.systemlanguage.tabindex.tablevalues.targetx.targety.transform.transform-origin.text-anchor.text-decoration.text-orientation.text-rendering.textlength.type.u1.u2.unicode.values.viewbox.visibility.version.vert-adv-y.vert-origin-x.vert-origin-y.width.word-spacing.wrap.writing-mode.xchannelselector.ychannelselector.x.x1.x2.xmlns.y.y1.y2.z.zoomandpan`.split(`.`)),WK=fK(`accent.accentunder.align.bevelled.close.columnalign.columnlines.columnspacing.columnspan.denomalign.depth.dir.display.displaystyle.encoding.fence.frame.height.href.id.largeop.length.linethickness.lquote.lspace.mathbackground.mathcolor.mathsize.mathvariant.maxsize.minsize.movablelimits.notation.numalign.open.rowalign.rowlines.rowspacing.rowspan.rspace.rquote.scriptlevel.scriptminsize.scriptsizemultiplier.selection.separator.separators.stretchy.subscriptshift.supscriptshift.symmetric.voffset.width.xmlns`.split(`.`)),GK=fK([`xlink:href`,`xml:id`,`xlink:title`,`xml:space`,`xmlns:xlink`]),YAe=pK(/{{[\w\W]*|^[\w\W]*}}/g),XAe=pK(/<%[\w\W]*|^[\w\W]*%>/g),ZAe=pK(/\${[\w\W]*/g),QAe=pK(/^data-[\-\w.\u00B7-\uFFFF]+$/),$Ae=pK(/^aria-[\-\w]+$/),KK=pK(/^(?:(?:(?:f|ht)tps?|mailto|tel|callto|sms|cid|xmpp|matrix):|[^a-z]|[a-z+.\-]+(?:[^a-z+.\-:]|$))/i),eje=pK(/^(?:\w+script|data):/i),tje=pK(/[\u0000-\u0020\u00A0\u1680\u180E\u2000-\u2029\u205F\u3000]/g),nje=pK(/^html$/i),rje=pK(/^[a-z][.\w]*(-[.\w]+)+$/i),qK=pK(/<[/\w!]/g),JK=pK(/<[/\w]/g),ije=pK(/<\/no(script|embed|frames)/i),aje=pK(/\/>/i),YK={element:1,attribute:2,text:3,cdataSection:4,entityReference:5,entityNode:6,processingInstruction:7,comment:8,document:9,documentType:10,documentFragment:11,notation:12},oje=function(){return typeof window>`u`?null:window},sje=function(e,t){if(typeof e!=`object`||typeof e.createPolicy!=`function`)return null;let n=null,r=`data-tt-policy-suffix`;t&&t.hasAttribute(r)&&(n=t.getAttribute(r));let i=`dompurify`+(n?`#`+n:``);try{return e.createPolicy(i,{createHTML(e){return e},createScriptURL(e){return e}})}catch{return console.warn(`TrustedTypes policy `+i+` could not be created.`),null}},XK=function(){return{afterSanitizeAttributes:[],afterSanitizeElements:[],afterSanitizeShadowDOM:[],beforeSanitizeAttributes:[],beforeSanitizeElements:[],beforeSanitizeShadowDOM:[],uponSanitizeAttribute:[],uponSanitizeElement:[],uponSanitizeShadowNode:[]}},ZK=function(e,t,n,r){return kK(e,t)&&xK(e[t])?PK(r.base?FK(r.base):{},e[t],r.transform):n};function QK(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:oje(),t=e=>QK(e);if(t.version=`3.4.13`,t.removed=[],!e||!e.document||e.document.nodeType!==YK.document||!e.Element)return t.isSupported=!1,t;let n=e.document,r=n,i=r.currentScript;e.DocumentFragment;let a=e.HTMLTemplateElement,o=e.Node,s=e.Element,c=e.NodeFilter;e.NamedNodeMap===void 0&&(e.NamedNodeMap||e.MozNamedAttrMap),e.HTMLFormElement;let l=e.DOMParser,u=e.trustedTypes,d=s.prototype,f=IK(d,`cloneNode`),p=IK(d,`remove`),m=IK(d,`nextSibling`),h=IK(d,`childNodes`),g=IK(d,`parentNode`),_=IK(d,`shadowRoot`),v=IK(d,`attributes`),y=o&&o.prototype?IK(o.prototype,`nodeType`):null,b=o&&o.prototype?IK(o.prototype,`nodeName`):null,x=o&&o.prototype?IK(o.prototype,`ownerDocument`):null;if(typeof a==`function`){let e=n.createElement(`template`);e.content&&e.content.ownerDocument&&(n=e.content.ownerDocument)}let S,C=``,w,T=!1,E=0,D=function(){if(E>0)throw MK(`A configured TRUSTED_TYPES_POLICY callback (createHTML or createScriptURL) must not call DOMPurify.sanitize, as that causes infinite recursion. Do not pass a policy whose callbacks wrap DOMPurify as TRUSTED_TYPES_POLICY; see the "DOMPurify and Trusted Types" section of the README.`)},O=function(e){D(),E++;try{return S.createHTML(e)}finally{E--}},k=function(e){D(),E++;try{return S.createScriptURL(e)}finally{E--}},A=function(){return T||=(w=sje(u,i),!0),w},j=n,M=j.implementation,N=j.createNodeIterator,P=j.createDocumentFragment,F=j.getElementsByTagName,I=r.importNode,L=XK();t.isSupported=typeof uK==`function`&&typeof g==`function`&&M&&M.createHTMLDocument!==void 0;let R=YAe,z=XAe,B=ZAe,V=QAe,ee=$Ae,te=eje,ne=tje,re=rje,ie=KK,ae=null,oe=PK({},[...LK,...RK,...zK,...BK,...VK]),se=null,H=PK({},[...HK,...UK,...WK,...GK]),ce=Object.seal(mK(null,{tagNameCheck:{writable:!0,configurable:!1,enumerable:!0,value:null},attributeNameCheck:{writable:!0,configurable:!1,enumerable:!0,value:null},allowCustomizedBuiltInElements:{writable:!0,configurable:!1,enumerable:!0,value:!1}})),le=null,ue=null,de=Object.seal(mK(null,{tagCheck:{writable:!0,configurable:!1,enumerable:!0,value:null},attributeCheck:{writable:!0,configurable:!1,enumerable:!0,value:null}})),fe=!0,pe=!0,me=!1,he=!0,ge=!1,_e=!0,ve=!1,ye=!1,be=null,xe=null,Se=!1,Ce=!1,we=!1,Te=!1,Ee=!0,De=!1,Oe=`user-content-`,ke=!0,Ae=!1,je={},Me=null,Ne=PK({},`annotation-xml.audio.colgroup.desc.foreignobject.head.iframe.math.mi.mn.mo.ms.mtext.noembed.noframes.noscript.plaintext.script.selectedcontent.style.svg.template.thead.title.video.xmp`.split(`.`)),Pe=null,Fe=PK({},[`audio`,`video`,`img`,`source`,`image`,`track`]),Ie=null,Le=PK({},[`alt`,`class`,`for`,`id`,`label`,`name`,`pattern`,`placeholder`,`role`,`summary`,`title`,`value`,`style`,`xmlns`]),Re=`http://www.w3.org/1998/Math/MathML`,ze=`http://www.w3.org/2000/svg`,Be=`http://www.w3.org/1999/xhtml`,Ve=Be,He=!1,Ue=null,We=PK({},[Re,ze,Be],CK),Ge=fK([`mi`,`mo`,`mn`,`ms`,`mtext`]),Ke=PK({},Ge),qe=fK([`annotation-xml`]),Je=PK({},qe),Ye=PK({},[`title`,`style`,`font`,`a`,`script`]),Xe=null,Ze=[`application/xhtml+xml`,`text/html`],Qe=null,$e=null,et=n.createElement(`form`),U=function(e){return e instanceof RegExp||e instanceof Function},tt=function(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:{};if($e&&$e===e)return;(!e||typeof e!=`object`)&&(e={}),e=FK(e),Xe=Ze.indexOf(e.PARSER_MEDIA_TYPE)===-1?`text/html`:e.PARSER_MEDIA_TYPE,Qe=Xe===`application/xhtml+xml`?CK:SK,ae=ZK(e,`ALLOWED_TAGS`,oe,{transform:Qe}),se=ZK(e,`ALLOWED_ATTR`,H,{transform:Qe}),Ue=ZK(e,`ALLOWED_NAMESPACES`,We,{transform:CK}),Ie=ZK(e,`ADD_URI_SAFE_ATTR`,Le,{transform:Qe,base:Le}),Pe=ZK(e,`ADD_DATA_URI_TAGS`,Fe,{transform:Qe,base:Fe}),Me=ZK(e,`FORBID_CONTENTS`,Ne,{transform:Qe}),le=ZK(e,`FORBID_TAGS`,FK({}),{transform:Qe}),ue=ZK(e,`FORBID_ATTR`,FK({}),{transform:Qe}),je=kK(e,`USE_PROFILES`)?e.USE_PROFILES&&typeof e.USE_PROFILES==`object`?FK(e.USE_PROFILES):e.USE_PROFILES:!1,fe=e.ALLOW_ARIA_ATTR!==!1,pe=e.ALLOW_DATA_ATTR!==!1,me=e.ALLOW_UNKNOWN_PROTOCOLS||!1,he=e.ALLOW_SELF_CLOSE_IN_ATTR!==!1,ge=e.SAFE_FOR_TEMPLATES||!1,_e=e.SAFE_FOR_XML!==!1,ve=e.WHOLE_DOCUMENT||!1,Ce=e.RETURN_DOM||!1,we=e.RETURN_DOM_FRAGMENT||!1,Te=e.RETURN_TRUSTED_TYPE||!1,Se=e.FORCE_BODY||!1,Ee=e.SANITIZE_DOM!==!1,De=e.SANITIZE_NAMED_PROPS||!1,ke=e.KEEP_CONTENT!==!1,Ae=e.IN_PLACE||!1,ie=KAe(e.ALLOWED_URI_REGEXP)?e.ALLOWED_URI_REGEXP:KK,Ve=typeof e.NAMESPACE==`string`?e.NAMESPACE:Be,Ke=kK(e,`MATHML_TEXT_INTEGRATION_POINTS`)&&e.MATHML_TEXT_INTEGRATION_POINTS&&typeof e.MATHML_TEXT_INTEGRATION_POINTS==`object`?FK(e.MATHML_TEXT_INTEGRATION_POINTS):PK({},Ge),Je=kK(e,`HTML_INTEGRATION_POINTS`)&&e.HTML_INTEGRATION_POINTS&&typeof e.HTML_INTEGRATION_POINTS==`object`?FK(e.HTML_INTEGRATION_POINTS):PK({},qe);let t=kK(e,`CUSTOM_ELEMENT_HANDLING`)&&e.CUSTOM_ELEMENT_HANDLING&&typeof e.CUSTOM_ELEMENT_HANDLING==`object`?FK(e.CUSTOM_ELEMENT_HANDLING):mK(null);if(ce=mK(null),kK(t,`tagNameCheck`)&&U(t.tagNameCheck)&&(ce.tagNameCheck=t.tagNameCheck),kK(t,`attributeNameCheck`)&&U(t.attributeNameCheck)&&(ce.attributeNameCheck=t.attributeNameCheck),kK(t,`allowCustomizedBuiltInElements`)&&typeof t.allowCustomizedBuiltInElements==`boolean`&&(ce.allowCustomizedBuiltInElements=t.allowCustomizedBuiltInElements),pK(ce),ge&&(pe=!1),we&&(Ce=!0),je&&(ae=PK({},VK),se=mK(null),je.html===!0&&(PK(ae,LK),PK(se,HK)),je.svg===!0&&(PK(ae,RK),PK(se,UK),PK(se,GK)),je.svgFilters===!0&&(PK(ae,zK),PK(se,UK),PK(se,GK)),je.mathMl===!0&&(PK(ae,BK),PK(se,WK),PK(se,GK))),de.tagCheck=null,de.attributeCheck=null,kK(e,`ADD_TAGS`)&&(typeof e.ADD_TAGS==`function`?de.tagCheck=e.ADD_TAGS:xK(e.ADD_TAGS)&&(ae===oe&&(ae=FK(ae)),PK(ae,e.ADD_TAGS,Qe))),kK(e,`ADD_ATTR`)&&(typeof e.ADD_ATTR==`function`?de.attributeCheck=e.ADD_ATTR:xK(e.ADD_ATTR)&&(se===H&&(se=FK(se)),PK(se,e.ADD_ATTR,Qe))),kK(e,`ADD_URI_SAFE_ATTR`)&&xK(e.ADD_URI_SAFE_ATTR)&&PK(Ie,e.ADD_URI_SAFE_ATTR,Qe),kK(e,`FORBID_CONTENTS`)&&xK(e.FORBID_CONTENTS)&&(Me===Ne&&(Me=FK(Me)),PK(Me,e.FORBID_CONTENTS,Qe)),kK(e,`ADD_FORBID_CONTENTS`)&&xK(e.ADD_FORBID_CONTENTS)&&(Me===Ne&&(Me=FK(Me)),PK(Me,e.ADD_FORBID_CONTENTS,Qe)),ke&&(ae[`#text`]=!0),ve&&PK(ae,[`html`,`head`,`body`]),ae.table&&(PK(ae,[`tbody`]),delete le.tbody),e.TRUSTED_TYPES_POLICY){if(typeof e.TRUSTED_TYPES_POLICY.createHTML!=`function`)throw MK(`TRUSTED_TYPES_POLICY configuration option must provide a "createHTML" hook.`);if(typeof e.TRUSTED_TYPES_POLICY.createScriptURL!=`function`)throw MK(`TRUSTED_TYPES_POLICY configuration option must provide a "createScriptURL" hook.`);let t=S;S=e.TRUSTED_TYPES_POLICY;try{C=O(``)}catch(e){throw S=t,e}}else e.TRUSTED_TYPES_POLICY===null?(S=void 0,C=``):(S===void 0&&(S=A()),S&&typeof C==`string`&&(C=O(``)));fK&&fK(e),$e=e},nt=PK({},[...RK,...zK,...qAe]),rt=PK({},[...BK,...JAe]),it=function(e,t,n){return t.namespaceURI===Be?e===`svg`:t.namespaceURI===Re?e===`svg`&&(n===`annotation-xml`||Ke[n]):!!nt[e]},at=function(e,t,n){return t.namespaceURI===Be?e===`math`:t.namespaceURI===ze?e===`math`&&Je[n]:!!rt[e]},ot=function(e,t,n){return t.namespaceURI===ze&&!Je[n]||t.namespaceURI===Re&&!Ke[n]?!1:!rt[e]&&(Ye[e]||!nt[e])},st=function(e){let t=g(e);(!t||!t.tagName)&&(t={namespaceURI:Ve,tagName:`template`});let n=SK(e.tagName),r=SK(t.tagName);return Ue[e.namespaceURI]?e.namespaceURI===ze?it(n,t,r):e.namespaceURI===Re?at(n,t,r):e.namespaceURI===Be?ot(n,t,r):!!(Xe===`application/xhtml+xml`&&Ue[e.namespaceURI]):!1},ct=function(e){bK(t.removed,{element:e});try{g(e).removeChild(e)}catch{if(p(e),!g(e))throw MK(`a node selected for removal could not be detached from its tree and cannot be safely returned; refusing to sanitize in place`)}},lt=function(e){ft(e);let t=h(e);if(t){let e=[];vK(t,t=>{bK(e,t)}),vK(e,e=>{try{p(e)}catch{}})}let n=v(e);if(n)for(let t=n.length-1;t>=0;--t){let r=n[t],i=r&&r.name;if(typeof i==`string`)try{e.removeAttribute(i)}catch{}}},ut=function(e,n){try{bK(t.removed,{attribute:n.getAttributeNode(e),from:n})}catch{bK(t.removed,{attribute:null,from:n})}if(n.removeAttribute(e),e===`is`)if(Ce||we)try{ct(n)}catch{}else try{n.setAttribute(e,``)}catch{}},dt=function(e){let t=v(e);if(t)for(let n=t.length-1;n>=0;--n){let r=t[n],i=r&&r.name;if(!(typeof i!=`string`||se[Qe(i)]))try{e.removeAttribute(i)}catch{}}},ft=function(e){let t=[e];for(;t.length>0;){let e=t.pop();(y?y(e):e.nodeType)===YK.element&&dt(e);let n=h(e);if(n)for(let e=n.length-1;e>=0;--e)t.push(n[e])}},pt=function(e){if(!_e)return;let t=[e];for(;t.length>0;){let e=t.pop(),n=y?y(e):e.nodeType;if(n===YK.processingInstruction||n===YK.comment&&jK(JK,e.data)){try{p(e)}catch{}continue}if(n===YK.element){let t=e,n=Qe(b?b(e):e.nodeName);try{t.hasAttribute&&t.hasAttribute(`patchsrc`)&&t.removeAttribute(`patchsrc`),t.hasAttribute&&t.hasAttribute(`for`)&&n!==`label`&&n!==`output`&&t.removeAttribute(`for`)}catch{}}let r=h(e);if(r)for(let e=r.length-1;e>=0;--e)t.push(r[e])}},mt=function(e){let t=null,r=null;if(Se)e=`<remove></remove>`+e;else{let t=wK(e,/^[\r\n\t ]+/);r=t&&t[0]}Xe===`application/xhtml+xml`&&Ve===Be&&(e=`<html xmlns="http://www.w3.org/1999/xhtml"><head></head><body>`+e+`</body></html>`);let i=S?O(e):e;if(Ve===Be)try{t=new l().parseFromString(i,Xe)}catch{}if(!t||!t.documentElement){t=M.createDocument(Ve,`template`,null);try{t.documentElement.innerHTML=He?C:i}catch{}}let a=t.body||t.documentElement;return e&&r&&a.insertBefore(n.createTextNode(r),a.childNodes[0]||null),Ve===Be?F.call(t,ve?`html`:`body`)[0]:ve?t.documentElement:a},ht=function(e){let t=x?x(e):e.ownerDocument;return N.call(t||e,e,c.SHOW_ELEMENT|c.SHOW_COMMENT|c.SHOW_TEXT|c.SHOW_PROCESSING_INSTRUCTION|c.SHOW_CDATA_SECTION,null)},gt=function(e){return e=TK(e,R,` `),e=TK(e,z,` `),e=TK(e,B,` `),e},_t=function(e){e.normalize();let t=x?x(e):e.ownerDocument,n=N.call(t||e,e,c.SHOW_TEXT|c.SHOW_COMMENT|c.SHOW_CDATA_SECTION|c.SHOW_PROCESSING_INSTRUCTION,null),r=n.nextNode();for(;r;)r.data=gt(r.data),r=n.nextNode();let i=e.querySelectorAll?.call(e,`template`);i&&vK(i,e=>{yt(e.content)&&_t(e.content)})},vt=function(e){let t=b?b(e):null;return typeof t!=`string`||Qe(t)!==`form`?!1:typeof e.nodeName!=`string`||typeof e.textContent!=`string`||typeof e.removeChild!=`function`||e.attributes!==v(e)||typeof e.removeAttribute!=`function`||typeof e.setAttribute!=`function`||typeof e.namespaceURI!=`string`||typeof e.insertBefore!=`function`||typeof e.hasChildNodes!=`function`||e.nodeType!==y(e)||e.childNodes!==h(e)},yt=function(e){if(!y||typeof e!=`object`||!e)return!1;try{return y(e)===YK.documentFragment}catch{return!1}},bt=function(e){if(!y||typeof e!=`object`||!e)return!1;try{return typeof y(e)==`number`}catch{return!1}};function xt(e,n,r){e.length!==0&&vK(e,e=>{e.call(t,n,r,$e)})}let St=function(e,t){return!!(_e&&e.hasChildNodes()&&!bt(e.firstElementChild)&&jK(qK,e.textContent)&&jK(qK,e.innerHTML)||_e&&e.namespaceURI===Be&&t===`style`&&bt(e.firstElementChild)||e.nodeType===YK.processingInstruction||_e&&e.nodeType===YK.comment&&jK(JK,e.data))},Ct=function(e,t,n){if(!le[t]&&Ot(t)&&(ce.tagNameCheck instanceof RegExp&&jK(ce.tagNameCheck,t)||ce.tagNameCheck instanceof Function&&ce.tagNameCheck(t)))return!1;if(ke&&!Me[t]){let t=g(e),r=h(e);if(r&&t){let i=r.length;for(let a=i-1;a>=0;--a){let i=e===n?f(r[a],!0):r[a];t.insertBefore(i,m(e))}}}return ct(e),!0},wt=function(e,t,n,r){return e.length===0?t:t===n||t===r?FK(t):t},Tt=function(e,n){if(xt(L.beforeSanitizeElements,e,null),e!==n&&g(e)===null)return Ae&&ft(e),!0;if(vt(e))return ct(e),!0;let r=Qe(b?b(e):e.nodeName);if(ae=wt(L.uponSanitizeElement,ae,oe,be),xt(L.uponSanitizeElement,e,{tagName:r,allowedTags:ae}),e!==n&&g(e)===null)return Ae&&ft(e),!0;if(St(e,r))return ct(e),!0;if(le[r]||!(de.tagCheck instanceof Function&&de.tagCheck(r))&&!ae[r]){let t=Ct(e,r,n);return t===!1&&xt(L.afterSanitizeElements,e,null),t}if((y?y(e):e.nodeType)===YK.element&&!st(e)||(r===`noscript`||r===`noembed`||r===`noframes`)&&jK(ije,e.innerHTML))return ct(e),!0;if(ge&&e.nodeType===YK.text){let n=gt(e.textContent);e.textContent!==n&&(bK(t.removed,{element:e.cloneNode()}),e.textContent=n)}return xt(L.afterSanitizeElements,e,null),!1},Et=function(e,t,r){if(ue[t]||_e&&t===`patchsrc`||_e&&t===`for`&&e!==`label`&&e!==`output`||Ee&&(t===`id`||t===`name`)&&(r in n||r in et))return!1;let i=se[t]||de.attributeCheck instanceof Function&&de.attributeCheck(t,e);if(!(pe&&jK(V,t))&&!(fe&&jK(ee,t))){if(!i){if(!(Ot(e)&&(ce.tagNameCheck instanceof RegExp&&jK(ce.tagNameCheck,e)||ce.tagNameCheck instanceof Function&&ce.tagNameCheck(e))&&(ce.attributeNameCheck instanceof RegExp&&jK(ce.attributeNameCheck,t)||ce.attributeNameCheck instanceof Function&&ce.attributeNameCheck(t,e))||t===`is`&&ce.allowCustomizedBuiltInElements&&(ce.tagNameCheck instanceof RegExp&&jK(ce.tagNameCheck,r)||ce.tagNameCheck instanceof Function&&ce.tagNameCheck(r))))return!1}else if(!Ie[t]&&!jK(ie,TK(r,ne,``))&&!((t===`src`||t===`xlink:href`||t===`href`)&&e!==`script`&&EK(r,`data:`)===0&&Pe[e])&&!(me&&!jK(te,TK(r,ne,``)))&&r)return!1}return!0},Dt=PK({},[`annotation-xml`,`color-profile`,`font-face`,`font-face-format`,`font-face-name`,`font-face-src`,`font-face-uri`,`missing-glyph`]),Ot=function(e){return!Dt[SK(e)]&&jK(re,e)},kt=function(e,t,n,r){if(S&&typeof u==`object`&&typeof u.getAttributeType==`function`&&!n)switch(u.getAttributeType(e,t)){case`TrustedHTML`:return O(r);case`TrustedScriptURL`:return k(r)}return r},At=function(e,n,r,i){try{r?e.setAttributeNS(r,n,i):e.setAttribute(n,i),vt(e)?ct(e):yK(t.removed)}catch{ut(n,e)}},jt=function(e){xt(L.beforeSanitizeAttributes,e,null);let t=e.attributes;if(!t||vt(e))return;se=wt(L.uponSanitizeAttribute,se,H,xe);let n={attrName:``,attrValue:``,keepAttr:!0,allowedAttributes:se,forceKeepAttr:void 0},r=t.length,i=Qe(e.nodeName);for(;r--;){let a=t[r],o=a.name,s=a.namespaceURI,c=a.value,l=Qe(o),u=c,d=o===`value`?u:BAe(u);if(n.attrName=l,n.attrValue=d,n.keepAttr=!0,n.forceKeepAttr=void 0,xt(L.uponSanitizeAttribute,e,n),d=n.attrValue,De&&(l===`id`||l===`name`)&&EK(d,Oe)!==0&&(ut(o,e),d=Oe+d),_e&&jK(/((--!?|])>)|<\/(style|script|title|xmp|textarea|noscript|iframe|noembed|noframes)/i,d)){ut(o,e);continue}if(l===`attributename`&&wK(d,`href`)){ut(o,e);continue}if(!n.forceKeepAttr){if(!n.keepAttr){ut(o,e);continue}if(!he&&jK(aje,d)){ut(o,e);continue}if(ge&&(d=gt(d)),!Et(i,l,d)){ut(o,e);continue}d=kt(i,l,s,d),d!==u&&At(e,o,s,d)}}xt(L.afterSanitizeAttributes,e,null)},Mt=function(e){let t=null,n=ht(e);for(xt(L.beforeSanitizeShadowDOM,e,null);t=n.nextNode();)if(xt(L.uponSanitizeShadowNode,t,null),Tt(t,e),jt(t),yt(t.content)&&Mt(t.content),(y?y(t):t.nodeType)===YK.element){let e=_(t);yt(e)&&(Nt(e),Mt(e))}xt(L.afterSanitizeShadowDOM,e,null)},Nt=function(e){let t=[{node:e,shadow:null}];for(;t.length>0;){let e=t.pop();if(e.shadow){Mt(e.shadow);continue}let n=e.node,r=(y?y(n):n.nodeType)===YK.element,i=h(n);if(i)for(let e=i.length-1;e>=0;--e)t.push({node:i[e],shadow:null});if(r){let e=b?b(n):null;if(typeof e==`string`&&Qe(e)===`template`){let e=n.content;yt(e)&&t.push({node:e,shadow:null})}}if(r){let e=_(n);yt(e)&&t.push({node:null,shadow:e},{node:e,shadow:null})}}};return t.sanitize=function(e){let n=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{},i=null,a=null,o=null,s=null;if(He=!e,He&&(e=`<!-->`),typeof e!=`string`&&!bt(e)&&(e=GAe(e),typeof e!=`string`))throw MK(`dirty is not a string, aborting`);if(!t.isSupported)return e;ye?(ae=be,se=xe):tt(n),(L.uponSanitizeElement.length>0||L.uponSanitizeAttribute.length>0)&&(ae=FK(ae)),L.uponSanitizeAttribute.length>0&&(se=FK(se)),t.removed=[];let c=Ae&&typeof e!=`string`&&bt(e);if(c){pt(e);let t=b?b(e):e.nodeName;if(typeof t==`string`){let n=Qe(t);if(!ae[n]||le[n])throw lt(e),MK(`root node is forbidden and cannot be sanitized in-place`)}if(vt(e))throw lt(e),MK(`root node is clobbered and cannot be sanitized in-place`);try{Nt(e)}catch(t){throw lt(e),t}}else if(bt(e))i=mt(`<!---->`),a=i.ownerDocument.importNode(e,!0),a.nodeType===YK.element&&a.nodeName===`BODY`||a.nodeName===`HTML`?i=a:i.appendChild(a),Nt(a);else{if(!Ce&&!ge&&!ve&&e.indexOf(`<`)===-1)return S&&Te?O(e):e;if(i=mt(e),!i)return Ce?null:Te?C:``}i&&Se&&ct(i.firstChild);let l=c?e:i;try{let e=ht(l);for(;o=e.nextNode();)Tt(o,l),jt(o),yt(o.content)&&Mt(o.content)}catch(n){throw c&&(lt(e),vK(t.removed,e=>{e.element&&ft(e.element)})),n}if(c)return vK(t.removed,e=>{e.element&&ft(e.element)}),ge&&_t(e),e;if(Ce){if(ge&&_t(i),we)for(s=P.call(i.ownerDocument);i.firstChild;)s.appendChild(i.firstChild);else s=i;return(se.shadowroot||se.shadowrootmode)&&(s=I.call(r,s,!0)),s}let u=ve?i.outerHTML:i.innerHTML;return ve&&ae[`!doctype`]&&i.ownerDocument&&i.ownerDocument.doctype&&i.ownerDocument.doctype.name&&jK(nje,i.ownerDocument.doctype.name)&&(u=`<!DOCTYPE `+i.ownerDocument.doctype.name+`>
-`+u),ge&&(u=gt(u)),S&&Te?O(u):u},t.setConfig=function(){tt(arguments.length>0&&arguments[0]!==void 0?arguments[0]:{}),ye=!0,be=ae,xe=se},t.clearConfig=function(){$e=null,ye=!1,be=null,xe=null,S=w,C=``},t.isValidAttribute=function(e,t,n){return $e||tt({}),Et(Qe(e),Qe(t),n)},t.addHook=function(e,t){typeof t==`function`&&kK(L,e)&&bK(L[e],t)},t.removeHook=function(e,t){if(kK(L,e)){if(t!==void 0){let n=RAe(L[e],t);return n===-1?void 0:zAe(L[e],n,1)[0]}return yK(L[e])}},t.removeHooks=function(e){kK(L,e)&&(L[e]=[])},t.removeAllHooks=function(){L=XK()},t}var $K=QK(),eq=Object.defineProperty,cje=(e,t)=>{let n={};for(var r in e)eq(n,r,{get:e[r],enumerable:!0});return t||eq(n,Symbol.toStringTag,{value:`Module`}),n};function tq(e){this.content=e}tq.prototype={constructor:tq,find:function(e){for(var t=0;t<this.content.length;t+=2)if(this.content[t]===e)return t;return-1},get:function(e){var t=this.find(e);return t==-1?void 0:this.content[t+1]},update:function(e,t,n){var r=n&&n!=e?this.remove(n):this,i=r.find(e),a=r.content.slice();return i==-1?a.push(n||e,t):(a[i+1]=t,n&&(a[i]=n)),new tq(a)},remove:function(e){var t=this.find(e);if(t==-1)return this;var n=this.content.slice();return n.splice(t,2),new tq(n)},addToStart:function(e,t){return new tq([e,t].concat(this.remove(e).content))},addToEnd:function(e,t){var n=this.remove(e).content.slice();return n.push(e,t),new tq(n)},addBefore:function(e,t,n){var r=this.remove(t),i=r.content.slice(),a=r.find(e);return i.splice(a==-1?i.length:a,0,t,n),new tq(i)},forEach:function(e){for(var t=0;t<this.content.length;t+=2)e(this.content[t],this.content[t+1])},prepend:function(e){return e=tq.from(e),e.size?new tq(e.content.concat(this.subtract(e).content)):this},append:function(e){return e=tq.from(e),e.size?new tq(this.subtract(e).content.concat(e.content)):this},subtract:function(e){var t=this;e=tq.from(e);for(var n=0;n<e.content.length;n+=2)t=t.remove(e.content[n]);return t},toObject:function(){var e={};return this.forEach(function(t,n){e[t]=n}),e},get size(){return this.content.length>>1}},tq.from=function(e){if(e instanceof tq)return e;var t=[];if(e)for(var n in e)t.push(n,e[n]);return new tq(t)};function nq(e,t,n){for(let r=0;;r++){if(r==e.childCount||r==t.childCount)return e.childCount==t.childCount?null:n;let i=e.child(r),a=t.child(r);if(i==a){n+=i.nodeSize;continue}if(!i.sameMarkup(a))return n;if(i.isText&&i.text!=a.text){let e=i.text,t=a.text,r=0;for(;e[r]==t[r];r++)n++;return r&&r<e.length&&r<t.length&&aq(e.charCodeAt(r-1))&&iq(e.charCodeAt(r))&&n--,n}if(i.content.size||a.content.size){let e=nq(i.content,a.content,n+1);if(e!=null)return e}n+=i.nodeSize}}function rq(e,t,n,r){for(let i=e.childCount,a=t.childCount;;){if(i==0||a==0)return i==a?null:{a:n,b:r};let o=e.child(--i),s=t.child(--a),c=o.nodeSize;if(o==s){n-=c,r-=c;continue}if(!o.sameMarkup(s))return{a:n,b:r};if(o.isText&&o.text!=s.text){let e=o.text,t=s.text,i=e.length,a=t.length;for(;i>0&&a>0&&e[i-1]==t[a-1];)i--,a--,n--,r--;return i&&a&&i<e.length&&aq(e.charCodeAt(i-1))&&iq(e.charCodeAt(i))&&(n++,r++),{a:n,b:r}}if(o.content.size||s.content.size){let e=rq(o.content,s.content,n-1,r-1);if(e)return e}n-=c,r-=c}}function iq(e){return e>=56320&&e<57344}function aq(e){return e>=55296&&e<56320}var oq=class e{constructor(e,t){if(this.content=e,this.size=t||0,t==null)for(let t=0;t<e.length;t++)this.size+=e[t].nodeSize}nodesBetween(e,t,n,r=0,i){for(let a=0,o=0;o<t;a++){let s=this.content[a],c=o+s.nodeSize;if(c>e&&n(s,r+o,i||null,a)!==!1&&s.content.size){let i=o+1;s.nodesBetween(Math.max(0,e-i),Math.min(s.content.size,t-i),n,r+i)}o=c}}descendants(e){this.nodesBetween(0,this.size,e)}textBetween(e,t,n,r){let i=``,a=!0;return this.nodesBetween(e,t,(o,s)=>{let c=o.isText?o.text.slice(Math.max(e,s)-s,t-s):o.isLeaf?r?typeof r==`function`?r(o):r:o.type.spec.leafText?o.type.spec.leafText(o):``:``;o.isBlock&&(o.isLeaf&&c||o.isTextblock)&&n&&(a?a=!1:i+=n),i+=c},0),i}append(t){if(!t.size)return this;if(!this.size)return t;let n=this.lastChild,r=t.firstChild,i=this.content.slice(),a=0;for(n.isText&&n.sameMarkup(r)&&(i[i.length-1]=n.withText(n.text+r.text),a=1);a<t.content.length;a++)i.push(t.content[a]);return new e(i,this.size+t.size)}cut(t,n=this.size){if(t==0&&n==this.size)return this;let r=[],i=0;if(n>t)for(let e=0,a=0;a<n;e++){let o=this.content[e],s=a+o.nodeSize;s>t&&((a<t||s>n)&&(o=o.isText?o.cut(Math.max(0,t-a),Math.min(o.text.length,n-a)):o.cut(Math.max(0,t-a-1),Math.min(o.content.size,n-a-1))),r.push(o),i+=o.nodeSize),a=s}return new e(r,i)}cutByIndex(t,n){return t==n?e.empty:t==0&&n==this.content.length?this:new e(this.content.slice(t,n))}replaceChild(t,n){let r=this.content[t];if(r==n)return this;let i=this.content.slice(),a=this.size+n.nodeSize-r.nodeSize;return i[t]=n,new e(i,a)}addToStart(t){return new e([t].concat(this.content),this.size+t.nodeSize)}addToEnd(t){return new e(this.content.concat(t),this.size+t.nodeSize)}eq(e){if(this.content.length!=e.content.length)return!1;for(let t=0;t<this.content.length;t++)if(!this.content[t].eq(e.content[t]))return!1;return!0}get firstChild(){return this.content.length?this.content[0]:null}get lastChild(){return this.content.length?this.content[this.content.length-1]:null}get childCount(){return this.content.length}child(e){let t=this.content[e];if(!t)throw RangeError(`Index `+e+` out of range for `+this);return t}maybeChild(e){return this.content[e]||null}forEach(e){for(let t=0,n=0;t<this.content.length;t++){let r=this.content[t];e(r,n,t),n+=r.nodeSize}}findDiffStart(e,t=0){return nq(this,e,t)}findDiffEnd(e,t=this.size,n=e.size){return rq(this,e,t,n)}findIndex(e){if(e==0)return cq(0,e);if(e==this.size)return cq(this.content.length,e);if(e>this.size||e<0)throw RangeError(`Position ${e} outside of fragment (${this})`);for(let t=0,n=0;;t++){let r=this.child(t),i=n+r.nodeSize;if(i>=e)return i==e?cq(t+1,i):cq(t,n);n=i}}toString(){return`<`+this.toStringInner()+`>`}toStringInner(){return this.content.join(`, `)}toJSON(){return this.content.length?this.content.map(e=>e.toJSON()):null}static fromJSON(t,n){if(!n)return e.empty;if(!Array.isArray(n))throw RangeError(`Invalid input for Fragment.fromJSON`);return e.fromArray(n.map(t.nodeFromJSON))}static fromArray(t){if(!t.length)return e.empty;let n,r=0;for(let e=0;e<t.length;e++){let i=t[e];r+=i.nodeSize,e&&i.isText&&t[e-1].sameMarkup(i)?(n||=t.slice(0,e),n[n.length-1]=i.withText(n[n.length-1].text+i.text)):n&&n.push(i)}return new e(n||t,r)}static from(t){if(!t)return e.empty;if(t instanceof e)return t;if(Array.isArray(t))return this.fromArray(t);if(t.attrs)return new e([t],t.nodeSize);throw RangeError(`Can not convert `+t+` to a Fragment`+(t.nodesBetween?` (looks like multiple versions of prosemirror-model were loaded)`:``))}};oq.empty=new oq([],0);var sq={index:0,offset:0};function cq(e,t){return sq.index=e,sq.offset=t,sq}function lq(e,t){if(e===t)return!0;if(!(e&&typeof e==`object`)||!(t&&typeof t==`object`))return!1;let n=Array.isArray(e);if(Array.isArray(t)!=n)return!1;if(n){if(e.length!=t.length)return!1;for(let n=0;n<e.length;n++)if(!lq(e[n],t[n]))return!1}else{for(let n in e)if(!(n in t)||!lq(e[n],t[n]))return!1;for(let n in t)if(!(n in e))return!1}return!0}var uq=class e{constructor(e,t){this.type=e,this.attrs=t}addToSet(e){let t,n=!1;for(let r=0;r<e.length;r++){let i=e[r];if(this.eq(i))return e;if(this.type.excludes(i.type))t||=e.slice(0,r);else if(i.type.excludes(this.type))return e;else !n&&i.type.rank>this.type.rank&&(t||=e.slice(0,r),t.push(this),n=!0),t&&t.push(i)}return t||=e.slice(),n||t.push(this),t}removeFromSet(e){for(let t=0;t<e.length;t++)if(this.eq(e[t]))return e.slice(0,t).concat(e.slice(t+1));return e}isInSet(e){for(let t=0;t<e.length;t++)if(this.eq(e[t]))return!0;return!1}eq(e){return this==e||this.type==e.type&&lq(this.attrs,e.attrs)}toJSON(){let e={type:this.type.name};for(let t in this.attrs){e.attrs=this.attrs;break}return e}static fromJSON(e,t){if(!t)throw RangeError(`Invalid input for Mark.fromJSON`);let n=e.marks[t.type];if(!n)throw RangeError(`There is no mark type ${t.type} in this schema`);let r=n.create(t.attrs);return n.checkAttrs(r.attrs),r}static sameSet(e,t){if(e==t)return!0;if(e.length!=t.length)return!1;for(let n=0;n<e.length;n++)if(!e[n].eq(t[n]))return!1;return!0}static setFrom(t){if(!t||Array.isArray(t)&&t.length==0)return e.none;if(t instanceof e)return[t];let n=t.slice();return n.sort((e,t)=>e.type.rank-t.type.rank),n}};uq.none=[];var dq=class extends Error{},fq=class e{constructor(e,t,n){this.content=e,this.openStart=t,this.openEnd=n}get size(){return this.content.size-this.openStart-this.openEnd}insertAt(t,n){let r=mq(this.content,t+this.openStart,n,this.openStart+1,this.openEnd+1);return r&&new e(r,this.openStart,this.openEnd)}removeBetween(t,n){return new e(pq(this.content,t+this.openStart,n+this.openStart),this.openStart,this.openEnd)}eq(e){return this.content.eq(e.content)&&this.openStart==e.openStart&&this.openEnd==e.openEnd}toString(){return this.content+`(`+this.openStart+`,`+this.openEnd+`)`}toJSON(){if(!this.content.size)return null;let e={content:this.content.toJSON()};return this.openStart>0&&(e.openStart=this.openStart),this.openEnd>0&&(e.openEnd=this.openEnd),e}static fromJSON(t,n){if(!n)return e.empty;let r=n.openStart||0,i=n.openEnd||0;if(typeof r!=`number`||typeof i!=`number`)throw RangeError(`Invalid input for Slice.fromJSON`);return new e(oq.fromJSON(t,n.content),r,i)}static maxOpen(t,n=!0){let r=0,i=0;for(let e=t.firstChild;e&&!e.isLeaf&&(n||!e.type.spec.isolating);e=e.firstChild)r++;for(let e=t.lastChild;e&&!e.isLeaf&&(n||!e.type.spec.isolating);e=e.lastChild)i++;return new e(t,r,i)}};fq.empty=new fq(oq.empty,0,0);function pq(e,t,n){let{index:r,offset:i}=e.findIndex(t),a=e.maybeChild(r),{index:o,offset:s}=e.findIndex(n);if(i==t||a.isText){if(s!=n&&!e.child(o).isText)throw RangeError(`Removing non-flat range`);return e.cut(0,t).append(e.cut(n))}if(r!=o)throw RangeError(`Removing non-flat range`);return e.replaceChild(r,a.copy(pq(a.content,t-i-1,n-i-1)))}function mq(e,t,n,r,i,a){let{index:o,offset:s}=e.findIndex(t),c=e.maybeChild(o);if(s==t||c.isText)return a&&r<=0&&i<=0&&!a.canReplace(o,o,n)?null:e.cut(0,t).append(n).append(e.cut(t));let l=mq(c.content,t-s-1,n,o==0?r-1:0,o==e.childCount-1?i-1:0,c);return l&&e.replaceChild(o,c.copy(l))}function lje(e,t,n){if(n.openStart>e.depth)throw new dq(`Inserted content deeper than insertion position`);if(e.depth-n.openStart!=t.depth-n.openEnd)throw new dq(`Inconsistent open depths`);return hq(e,t,n,0)}function hq(e,t,n,r){let i=e.index(r),a=e.node(r);if(i==t.index(r)&&r<e.depth-n.openStart){let o=hq(e,t,n,r+1);return a.copy(a.content.replaceChild(i,o))}else if(!n.content.size)return bq(a,Sq(e,t,r));else if(!n.openStart&&!n.openEnd&&e.depth==r&&t.depth==r){let r=e.parent,i=r.content;return bq(r,i.cut(0,e.parentOffset).append(n.content).append(i.cut(t.parentOffset)))}else{let{start:i,end:o}=uje(n,e);return bq(a,xq(e,i,o,t,r))}}function gq(e,t){if(!t.type.compatibleContent(e.type))throw new dq(`Cannot join `+t.type.name+` onto `+e.type.name)}function _q(e,t,n){let r=e.node(n);return gq(r,t.node(n)),r}function vq(e,t){let n=t.length-1;n>=0&&e.isText&&e.sameMarkup(t[n])?t[n]=e.withText(t[n].text+e.text):t.push(e)}function yq(e,t,n,r){let i=(t||e).node(n),a=0,o=t?t.index(n):i.childCount;e&&(a=e.index(n),e.depth>n?a++:e.textOffset&&(vq(e.nodeAfter,r),a++));for(let e=a;e<o;e++)vq(i.child(e),r);t&&t.depth==n&&t.textOffset&&vq(t.nodeBefore,r)}function bq(e,t){if(!e.type.validContent(t))throw new dq(`Invalid content for node `+e.type.name);return e.copy(t)}function xq(e,t,n,r,i){let a=e.depth>i&&_q(e,t,i+1),o=r.depth>i&&_q(n,r,i+1),s=[];return yq(null,e,i,s),a&&o&&t.index(i)==n.index(i)?(gq(a,o),vq(bq(a,xq(e,t,n,r,i+1)),s)):(a&&vq(bq(a,Sq(e,t,i+1)),s),yq(t,n,i,s),o&&vq(bq(o,Sq(n,r,i+1)),s)),yq(r,null,i,s),new oq(s)}function Sq(e,t,n){let r=[];return yq(null,e,n,r),e.depth>n&&vq(bq(_q(e,t,n+1),Sq(e,t,n+1)),r),yq(t,null,n,r),new oq(r)}function uje(e,t){let n=t.depth-e.openStart,r=t.node(n).copy(e.content);for(let e=n-1;e>=0;e--)r=t.node(e).copy(oq.from(r));return{start:r.resolveNoCache(e.openStart+n),end:r.resolveNoCache(r.content.size-e.openEnd-n)}}var Cq=class e{constructor(e,t,n){this.pos=e,this.path=t,this.parentOffset=n,this.depth=t.length/3-1}resolveDepth(e){return e==null?this.depth:e<0?this.depth+e:e}get parent(){return this.node(this.depth)}get doc(){return this.node(0)}node(e){return this.path[this.resolveDepth(e)*3]}index(e){return this.path[this.resolveDepth(e)*3+1]}indexAfter(e){return e=this.resolveDepth(e),this.index(e)+(e==this.depth&&!this.textOffset?0:1)}start(e){return e=this.resolveDepth(e),e==0?0:this.path[e*3-1]+1}end(e){return e=this.resolveDepth(e),this.start(e)+this.node(e).content.size}before(e){if(e=this.resolveDepth(e),!e)throw RangeError(`There is no position before the top-level node`);return e==this.depth+1?this.pos:this.path[e*3-1]}after(e){if(e=this.resolveDepth(e),!e)throw RangeError(`There is no position after the top-level node`);return e==this.depth+1?this.pos:this.path[e*3-1]+this.path[e*3].nodeSize}get textOffset(){return this.pos-this.path[this.path.length-1]}get nodeAfter(){let e=this.parent,t=this.index(this.depth);if(t==e.childCount)return null;let n=this.pos-this.path[this.path.length-1],r=e.child(t);return n?e.child(t).cut(n):r}get nodeBefore(){let e=this.index(this.depth),t=this.pos-this.path[this.path.length-1];return t?this.parent.child(e).cut(0,t):e==0?null:this.parent.child(e-1)}posAtIndex(e,t){t=this.resolveDepth(t);let n=this.path[t*3],r=t==0?0:this.path[t*3-1]+1;for(let t=0;t<e;t++)r+=n.child(t).nodeSize;return r}marks(){let e=this.parent,t=this.index();if(e.content.size==0)return uq.none;if(this.textOffset)return e.child(t).marks;let n=e.maybeChild(t-1),r=e.maybeChild(t);if(!n){let e=n;n=r,r=e}let i=n.marks;for(var a=0;a<i.length;a++)i[a].type.spec.inclusive===!1&&(!r||!i[a].isInSet(r.marks))&&(i=i[a--].removeFromSet(i));return i}marksAcross(e){let t=this.parent.maybeChild(this.index());if(!t||!t.isInline)return null;let n=t.marks,r=e.parent.maybeChild(e.index());for(var i=0;i<n.length;i++)n[i].type.spec.inclusive===!1&&(!r||!n[i].isInSet(r.marks))&&(n=n[i--].removeFromSet(n));return n}sharedDepth(e){for(let t=this.depth;t>0;t--)if(this.start(t)<=e&&this.end(t)>=e)return t;return 0}blockRange(e=this,t){if(e.pos<this.pos)return e.blockRange(this);for(let n=this.depth-(this.parent.inlineContent||this.pos==e.pos?1:0);n>=0;n--)if(e.pos<=this.end(n)&&(!t||t(this.node(n))))return new Tq(this,e,n);return null}sameParent(e){return this.pos-this.parentOffset==e.pos-e.parentOffset}max(e){return e.pos>this.pos?e:this}min(e){return e.pos<this.pos?e:this}toString(){let e=``;for(let t=1;t<=this.depth;t++)e+=(e?`/`:``)+this.node(t).type.name+`_`+this.index(t-1);return e+`:`+this.parentOffset}static resolve(t,n){if(!(n>=0&&n<=t.content.size))throw RangeError(`Position `+n+` out of range`);let r=[],i=0,a=n;for(let e=t;;){let{index:t,offset:n}=e.content.findIndex(a),o=a-n;if(r.push(e,t,i+n),!o||(e=e.child(t),e.isText))break;a=o-1,i+=n+1}return new e(n,r,a)}static resolveCached(t,n){let r=wq.get(t);if(r)for(let e=0;e<r.elts.length;e++){let t=r.elts[e];if(t.pos==n)return t}else wq.set(t,r=new dje);let i=r.elts[r.i]=e.resolve(t,n);return r.i=(r.i+1)%fje,i}},dje=class{constructor(){this.elts=[],this.i=0}},fje=12,wq=new WeakMap,Tq=class{constructor(e,t,n){this.$from=e,this.$to=t,this.depth=n}get start(){return this.$from.before(this.depth+1)}get end(){return this.$to.after(this.depth+1)}get parent(){return this.$from.node(this.depth)}get startIndex(){return this.$from.index(this.depth)}get endIndex(){return this.$to.indexAfter(this.depth)}},pje=Object.create(null),Eq=class e{constructor(e,t,n,r=uq.none){this.type=e,this.attrs=t,this.marks=r,this.content=n||oq.empty}get children(){return this.content.content}get nodeSize(){return this.isLeaf?1:2+this.content.size}get childCount(){return this.content.childCount}child(e){return this.content.child(e)}maybeChild(e){return this.content.maybeChild(e)}forEach(e){this.content.forEach(e)}nodesBetween(e,t,n,r=0){this.content.nodesBetween(e,t,n,r,this)}descendants(e){this.nodesBetween(0,this.content.size,e)}get textContent(){return this.isLeaf&&this.type.spec.leafText?this.type.spec.leafText(this):this.textBetween(0,this.content.size,``)}textBetween(e,t,n,r){return this.content.textBetween(e,t,n,r)}get firstChild(){return this.content.firstChild}get lastChild(){return this.content.lastChild}eq(e){return this==e||this.sameMarkup(e)&&this.content.eq(e.content)}sameMarkup(e){return this.hasMarkup(e.type,e.attrs,e.marks)}hasMarkup(e,t,n){return this.type==e&&lq(this.attrs,t||e.defaultAttrs||pje)&&uq.sameSet(this.marks,n||uq.none)}copy(t=null){return t==this.content?this:new e(this.type,this.attrs,t,this.marks)}mark(t){return t==this.marks?this:new e(this.type,this.attrs,this.content,t)}cut(e,t=this.content.size){return e==0&&t==this.content.size?this:this.copy(this.content.cut(e,t))}slice(e,t=this.content.size,n=!1){if(e==t)return fq.empty;let r=this.resolve(e),i=this.resolve(t),a=n?0:r.sharedDepth(t),o=r.start(a);return new fq(r.node(a).content.cut(r.pos-o,i.pos-o),r.depth-a,i.depth-a)}replace(e,t,n){return lje(this.resolve(e),this.resolve(t),n)}nodeAt(e){for(let t=this;;){let{index:n,offset:r}=t.content.findIndex(e);if(t=t.maybeChild(n),!t)return null;if(r==e||t.isText)return t;e-=r+1}}childAfter(e){let{index:t,offset:n}=this.content.findIndex(e);return{node:this.content.maybeChild(t),index:t,offset:n}}childBefore(e){if(e==0)return{node:null,index:0,offset:0};let{index:t,offset:n}=this.content.findIndex(e);if(n<e)return{node:this.content.child(t),index:t,offset:n};let r=this.content.child(t-1);return{node:r,index:t-1,offset:n-r.nodeSize}}resolve(e){return Cq.resolveCached(this,e)}resolveNoCache(e){return Cq.resolve(this,e)}rangeHasMark(e,t,n){let r=!1;return t>e&&this.nodesBetween(e,t,e=>(n.isInSet(e.marks)&&(r=!0),!r)),r}get isBlock(){return this.type.isBlock}get isTextblock(){return this.type.isTextblock}get inlineContent(){return this.type.inlineContent}get isInline(){return this.type.isInline}get isText(){return this.type.isText}get isLeaf(){return this.type.isLeaf}get isAtom(){return this.type.isAtom}toString(){if(this.type.spec.toDebugString)return this.type.spec.toDebugString(this);let e=this.type.name;return this.content.size&&(e+=`(`+this.content.toStringInner()+`)`),Dq(this.marks,e)}contentMatchAt(e){let t=this.type.contentMatch.matchFragment(this.content,0,e);if(!t)throw Error(`Called contentMatchAt on a node with invalid content`);return t}canReplace(e,t,n=oq.empty,r=0,i=n.childCount){let a=this.contentMatchAt(e).matchFragment(n,r,i),o=a&&a.matchFragment(this.content,t);if(!o||!o.validEnd)return!1;for(let e=r;e<i;e++)if(!this.type.allowsMarks(n.child(e).marks))return!1;return!0}canReplaceWith(e,t,n,r){if(r&&!this.type.allowsMarks(r))return!1;let i=this.contentMatchAt(e).matchType(n),a=i&&i.matchFragment(this.content,t);return a?a.validEnd:!1}canAppend(e){return e.content.size?this.canReplace(this.childCount,this.childCount,e.content):this.type.compatibleContent(e.type)}check(){this.type.checkContent(this.content),this.type.checkAttrs(this.attrs);let e=uq.none;for(let t=0;t<this.marks.length;t++){let n=this.marks[t];n.type.checkAttrs(n.attrs),e=n.addToSet(e)}if(!uq.sameSet(e,this.marks))throw RangeError(`Invalid collection of marks for node ${this.type.name}: ${this.marks.map(e=>e.type.name)}`);this.content.forEach(e=>e.check())}toJSON(){let e={type:this.type.name};for(let t in this.attrs){e.attrs=this.attrs;break}return this.content.size&&(e.content=this.content.toJSON()),this.marks.length&&(e.marks=this.marks.map(e=>e.toJSON())),e}static fromJSON(e,t){if(!t)throw RangeError(`Invalid input for Node.fromJSON`);let n;if(t.marks){if(!Array.isArray(t.marks))throw RangeError(`Invalid mark data for Node.fromJSON`);n=t.marks.map(e.markFromJSON)}if(t.type==`text`){if(typeof t.text!=`string`)throw RangeError(`Invalid text node in JSON`);return e.text(t.text,n)}let r=oq.fromJSON(e,t.content),i=e.nodeType(t.type).create(t.attrs,r,n);return i.type.checkAttrs(i.attrs),i}};Eq.prototype.text=void 0;var mje=class e extends Eq{constructor(e,t,n,r){if(super(e,t,null,r),!n)throw RangeError(`Empty text nodes are not allowed`);this.text=n}toString(){return this.type.spec.toDebugString?this.type.spec.toDebugString(this):Dq(this.marks,JSON.stringify(this.text))}get textContent(){return this.text}textBetween(e,t){return this.text.slice(e,t)}get nodeSize(){return this.text.length}mark(t){return t==this.marks?this:new e(this.type,this.attrs,this.text,t)}withText(t){return t==this.text?this:new e(this.type,this.attrs,t,this.marks)}cut(e=0,t=this.text.length){return e==0&&t==this.text.length?this:this.withText(this.text.slice(e,t))}eq(e){return this.sameMarkup(e)&&this.text==e.text}toJSON(){let e=super.toJSON();return e.text=this.text,e}};function Dq(e,t){for(let n=e.length-1;n>=0;n--)t=e[n].type.name+`(`+t+`)`;return t}var Oq=class e{constructor(e){this.validEnd=e,this.next=[],this.wrapCache=[]}static parse(t,n){let r=new hje(t,n);if(r.next==null)return e.empty;let i=kq(r);r.next&&r.err(`Unexpected trailing text`);let a=Sje(xje(i));return Cje(a,r),a}matchType(e){for(let t=0;t<this.next.length;t++)if(this.next[t].type==e)return this.next[t].next;return null}matchFragment(e,t=0,n=e.childCount){let r=this;for(let i=t;r&&i<n;i++)r=r.matchType(e.child(i).type);return r}get inlineContent(){return this.next.length!=0&&this.next[0].type.isInline}get defaultType(){for(let e=0;e<this.next.length;e++){let{type:t}=this.next[e];if(!(t.isText||t.hasRequiredAttrs()))return t}return null}compatible(e){for(let t=0;t<this.next.length;t++)for(let n=0;n<e.next.length;n++)if(this.next[t].type==e.next[n].type)return!0;return!1}fillBefore(e,t=!1,n=0){let r=[this];function i(a,o){let s=a.matchFragment(e,n);if(s&&(!t||s.validEnd))return oq.from(o.map(e=>e.createAndFill()));for(let e=0;e<a.next.length;e++){let{type:t,next:n}=a.next[e];if(!(t.isText||t.hasRequiredAttrs())&&r.indexOf(n)==-1){r.push(n);let e=i(n,o.concat(t));if(e)return e}}return null}return i(this,[])}findWrapping(e){for(let t=0;t<this.wrapCache.length;t+=2)if(this.wrapCache[t]==e)return this.wrapCache[t+1];let t=this.computeWrapping(e);return this.wrapCache.push(e,t),t}computeWrapping(e){let t=Object.create(null),n=[{match:this,type:null,via:null}];for(;n.length;){let r=n.shift(),i=r.match;if(i.matchType(e)){let e=[];for(let t=r;t.type;t=t.via)e.push(t.type);return e.reverse()}for(let e=0;e<i.next.length;e++){let{type:a,next:o}=i.next[e];!a.isLeaf&&!a.hasRequiredAttrs()&&!(a.name in t)&&(!r.type||o.validEnd)&&(n.push({match:a.contentMatch,type:a,via:r}),t[a.name]=!0)}}return null}get edgeCount(){return this.next.length}edge(e){if(e>=this.next.length)throw RangeError(`There's no ${e}th edge in this content match`);return this.next[e]}toString(){let e=[];function t(n){e.push(n);for(let r=0;r<n.next.length;r++)e.indexOf(n.next[r].next)==-1&&t(n.next[r].next)}return t(this),e.map((t,n)=>{let r=n+(t.validEnd?`*`:` `)+` `;for(let n=0;n<t.next.length;n++)r+=(n?`, `:``)+t.next[n].type.name+`->`+e.indexOf(t.next[n].next);return r}).join(`
-`)}};Oq.empty=new Oq(!0);var hje=class{constructor(e,t){this.string=e,this.nodeTypes=t,this.inline=null,this.pos=0,this.tokens=e.split(/\s*(?=\b|\W|$)/),this.tokens[this.tokens.length-1]==``&&this.tokens.pop(),this.tokens[0]==``&&this.tokens.shift()}get next(){return this.tokens[this.pos]}eat(e){return this.next==e&&(this.pos++||!0)}err(e){throw SyntaxError(e+` (in content expression '`+this.string+`')`)}};function kq(e){let t=[];do t.push(gje(e));while(e.eat(`|`));return t.length==1?t[0]:{type:`choice`,exprs:t}}function gje(e){let t=[];do t.push(_je(e));while(e.next&&e.next!=`)`&&e.next!=`|`);return t.length==1?t[0]:{type:`seq`,exprs:t}}function _je(e){let t=bje(e);for(;;)if(e.eat(`+`))t={type:`plus`,expr:t};else if(e.eat(`*`))t={type:`star`,expr:t};else if(e.eat(`?`))t={type:`opt`,expr:t};else if(e.eat(`{`))t=vje(e,t);else break;return t}function Aq(e){/\D/.test(e.next)&&e.err(`Expected number, got '`+e.next+`'`);let t=Number(e.next);return e.pos++,t}function vje(e,t){let n=Aq(e),r=n;return e.eat(`,`)&&(r=e.next==`}`?-1:Aq(e)),e.eat(`}`)||e.err(`Unclosed braced range`),{type:`range`,min:n,max:r,expr:t}}function yje(e,t){let n=e.nodeTypes,r=n[t];if(r)return[r];let i=[];for(let e in n){let r=n[e];r.isInGroup(t)&&i.push(r)}return i.length==0&&e.err(`No node type or group '`+t+`' found`),i}function bje(e){if(e.eat(`(`)){let t=kq(e);return e.eat(`)`)||e.err(`Missing closing paren`),t}else if(/\W/.test(e.next))e.err(`Unexpected token '`+e.next+`'`);else{let t=yje(e,e.next).map(t=>(e.inline==null?e.inline=t.isInline:e.inline!=t.isInline&&e.err(`Mixing inline and block content`),{type:`name`,value:t}));return e.pos++,t.length==1?t[0]:{type:`choice`,exprs:t}}}function xje(e){let t=[[]];return i(a(e,0),n()),t;function n(){return t.push([])-1}function r(e,n,r){let i={term:r,to:n};return t[e].push(i),i}function i(e,t){e.forEach(e=>e.to=t)}function a(e,t){if(e.type==`choice`)return e.exprs.reduce((e,n)=>e.concat(a(n,t)),[]);if(e.type==`seq`)for(let r=0;;r++){let o=a(e.exprs[r],t);if(r==e.exprs.length-1)return o;i(o,t=n())}else if(e.type==`star`){let o=n();return r(t,o),i(a(e.expr,o),o),[r(o)]}else if(e.type==`plus`){let o=n();return i(a(e.expr,t),o),i(a(e.expr,o),o),[r(o)]}else if(e.type==`opt`)return[r(t)].concat(a(e.expr,t));else if(e.type==`range`){let o=t;for(let t=0;t<e.min;t++){let t=n();i(a(e.expr,o),t),o=t}if(e.max==-1)i(a(e.expr,o),o);else for(let t=e.min;t<e.max;t++){let t=n();r(o,t),i(a(e.expr,o),t),o=t}return[r(o)]}else if(e.type==`name`)return[r(t,void 0,e.value)];else throw Error(`Unknown expr type`)}}function jq(e,t){return t-e}function Mq(e,t){let n=[];return r(t),n.sort(jq);function r(t){let i=e[t];if(i.length==1&&!i[0].term)return r(i[0].to);n.push(t);for(let e=0;e<i.length;e++){let{term:t,to:a}=i[e];!t&&n.indexOf(a)==-1&&r(a)}}}function Sje(e){let t=Object.create(null);return n(Mq(e,0));function n(r){let i=[];r.forEach(t=>{e[t].forEach(({term:t,to:n})=>{if(!t)return;let r;for(let e=0;e<i.length;e++)i[e][0]==t&&(r=i[e][1]);Mq(e,n).forEach(e=>{r||i.push([t,r=[]]),r.indexOf(e)==-1&&r.push(e)})})});let a=t[r.join(`,`)]=new Oq(r.indexOf(e.length-1)>-1);for(let e=0;e<i.length;e++){let r=i[e][1].sort(jq);a.next.push({type:i[e][0],next:t[r.join(`,`)]||n(r)})}return a}}function Cje(e,t){for(let n=0,r=[e];n<r.length;n++){let e=r[n],i=!e.validEnd,a=[];for(let t=0;t<e.next.length;t++){let{type:n,next:o}=e.next[t];a.push(n.name),i&&!(n.isText||n.hasRequiredAttrs())&&(i=!1),r.indexOf(o)==-1&&r.push(o)}i&&t.err(`Only non-generatable nodes (`+a.join(`, `)+`) in a required position (see https://prosemirror.net/docs/guide/#generatable)`)}}function Nq(e){let t=Object.create(null);for(let n in e){let r=e[n];if(!r.hasDefault)return null;t[n]=r.default}return t}function Pq(e,t){let n=Object.create(null);for(let r in e){let i=t&&t[r];if(i===void 0){let t=e[r];if(t.hasDefault)i=t.default;else throw RangeError(`No value supplied for attribute `+r)}n[r]=i}return n}function Fq(e,t,n,r){for(let i in t)if(!(i in e))throw RangeError(`Unsupported attribute ${i} for ${n} of type ${r}`);for(let n in e)e[n].validate&&e[n].validate(t[n])}function Iq(e,t){let n=Object.create(null);if(t)for(let r in t)n[r]=new Tje(e,r,t[r]);return n}var Lq=class e{constructor(e,t,n){this.name=e,this.schema=t,this.spec=n,this.markSet=null,this.groups=n.group?n.group.split(` `):[],this.attrs=Iq(e,n.attrs),this.defaultAttrs=Nq(this.attrs),this.contentMatch=null,this.inlineContent=null,this.isBlock=!(n.inline||e==`text`),this.isText=e==`text`}get isInline(){return!this.isBlock}get isTextblock(){return this.isBlock&&this.inlineContent}get isLeaf(){return this.contentMatch==Oq.empty}get isAtom(){return this.isLeaf||!!this.spec.atom}isInGroup(e){return this.groups.indexOf(e)>-1}get whitespace(){return this.spec.whitespace||(this.spec.code?`pre`:`normal`)}hasRequiredAttrs(){for(let e in this.attrs)if(this.attrs[e].isRequired)return!0;return!1}compatibleContent(e){return this==e||this.contentMatch.compatible(e.contentMatch)}computeAttrs(e){return!e&&this.defaultAttrs?this.defaultAttrs:Pq(this.attrs,e)}create(e=null,t,n){if(this.isText)throw Error(`NodeType.create can't construct text nodes`);return new Eq(this,this.computeAttrs(e),oq.from(t),uq.setFrom(n))}createChecked(e=null,t,n){return t=oq.from(t),this.checkContent(t),new Eq(this,this.computeAttrs(e),t,uq.setFrom(n))}createAndFill(e=null,t,n){if(e=this.computeAttrs(e),t=oq.from(t),t.size){let e=this.contentMatch.fillBefore(t);if(!e)return null;t=e.append(t)}let r=this.contentMatch.matchFragment(t),i=r&&r.fillBefore(oq.empty,!0);return i?new Eq(this,e,t.append(i),uq.setFrom(n)):null}validContent(e){let t=this.contentMatch.matchFragment(e);if(!t||!t.validEnd)return!1;for(let t=0;t<e.childCount;t++)if(!this.allowsMarks(e.child(t).marks))return!1;return!0}checkContent(e){if(!this.validContent(e))throw RangeError(`Invalid content for node ${this.name}: ${e.toString().slice(0,50)}`)}checkAttrs(e){Fq(this.attrs,e,`node`,this.name)}allowsMarkType(e){return this.markSet==null||this.markSet.indexOf(e)>-1}allowsMarks(e){if(this.markSet==null)return!0;for(let t=0;t<e.length;t++)if(!this.allowsMarkType(e[t].type))return!1;return!0}allowedMarks(e){if(this.markSet==null)return e;let t;for(let n=0;n<e.length;n++)this.allowsMarkType(e[n].type)?t&&t.push(e[n]):t||=e.slice(0,n);return t?t.length?t:uq.none:e}static compile(t,n){let r=Object.create(null);t.forEach((t,i)=>r[t]=new e(t,n,i));let i=n.spec.topNode||`doc`;if(!r[i])throw RangeError(`Schema is missing its top node type ('`+i+`')`);if(!r.text)throw RangeError(`Every schema needs a 'text' type`);for(let e in r.text.attrs)throw RangeError(`The text node type should not have attributes`);return r}};function wje(e,t,n){let r=n.split(`|`);return n=>{let i=n===null?`null`:typeof n;if(r.indexOf(i)<0)throw RangeError(`Expected value of type ${r} for attribute ${t} on type ${e}, got ${i}`)}}var Tje=class{constructor(e,t,n){this.hasDefault=Object.prototype.hasOwnProperty.call(n,`default`),this.default=n.default,this.validate=typeof n.validate==`string`?wje(e,t,n.validate):n.validate}get isRequired(){return!this.hasDefault}},Rq=class e{constructor(e,t,n,r){this.name=e,this.rank=t,this.schema=n,this.spec=r,this.attrs=Iq(e,r.attrs),this.excluded=null;let i=Nq(this.attrs);this.instance=i?new uq(this,i):null}create(e=null){return!e&&this.instance?this.instance:new uq(this,Pq(this.attrs,e))}static compile(t,n){let r=Object.create(null),i=0;return t.forEach((t,a)=>r[t]=new e(t,i++,n,a)),r}removeFromSet(e){for(var t=0;t<e.length;t++)e[t].type==this&&(e=e.slice(0,t).concat(e.slice(t+1)),t--);return e}isInSet(e){for(let t=0;t<e.length;t++)if(e[t].type==this)return e[t]}checkAttrs(e){Fq(this.attrs,e,`mark`,this.name)}excludes(e){return this.excluded.indexOf(e)>-1}},zq=class{constructor(e){this.linebreakReplacement=null,this.cached=Object.create(null);let t=this.spec={};for(let n in e)t[n]=e[n];t.nodes=tq.from(e.nodes),t.marks=tq.from(e.marks||{}),this.nodes=Lq.compile(this.spec.nodes,this),this.marks=Rq.compile(this.spec.marks,this);let n=Object.create(null);for(let e in this.nodes){if(e in this.marks)throw RangeError(e+` can not be both a node and a mark`);let t=this.nodes[e],r=t.spec.content||``,i=t.spec.marks;if(t.contentMatch=n[r]||(n[r]=Oq.parse(r,this.nodes)),t.inlineContent=t.contentMatch.inlineContent,t.spec.linebreakReplacement){if(this.linebreakReplacement)throw RangeError(`Multiple linebreak nodes defined`);if(!t.isInline||!t.isLeaf)throw RangeError(`Linebreak replacement nodes must be inline leaf nodes`);this.linebreakReplacement=t}t.markSet=i==`_`?null:i?Bq(this,i.split(` `)):i==``||!t.inlineContent?[]:null}for(let e in this.marks){let t=this.marks[e],n=t.spec.excludes;t.excluded=n==null?[t]:n==``?[]:Bq(this,n.split(` `))}this.nodeFromJSON=e=>Eq.fromJSON(this,e),this.markFromJSON=e=>uq.fromJSON(this,e),this.topNodeType=this.nodes[this.spec.topNode||`doc`],this.cached.wrappings=Object.create(null)}node(e,t=null,n,r){if(typeof e==`string`)e=this.nodeType(e);else if(!(e instanceof Lq))throw RangeError(`Invalid node type: `+e);else if(e.schema!=this)throw RangeError(`Node type from different schema used (`+e.name+`)`);return e.createChecked(t,n,r)}text(e,t){let n=this.nodes.text;return new mje(n,n.defaultAttrs,e,uq.setFrom(t))}mark(e,t){return typeof e==`string`&&(e=this.marks[e]),e.create(t)}nodeType(e){let t=this.nodes[e];if(!t)throw RangeError(`Unknown node type: `+e);return t}};function Bq(e,t){let n=[];for(let r=0;r<t.length;r++){let i=t[r],a=e.marks[i],o=a;if(a)n.push(a);else for(let t in e.marks){let r=e.marks[t];(i==`_`||r.spec.group&&r.spec.group.split(` `).indexOf(i)>-1)&&n.push(o=r)}if(!o)throw SyntaxError(`Unknown mark type: '`+t[r]+`'`)}return n}function Eje(e){return e.tag!=null}function Dje(e){return e.style!=null}var Vq=class e{constructor(e,t){this.schema=e,this.rules=t,this.tags=[],this.styles=[];let n=this.matchedStyles=[];t.forEach(e=>{if(Eje(e))this.tags.push(e);else if(Dje(e)){let t=/[^=]*/.exec(e.style)[0];n.indexOf(t)<0&&n.push(t),this.styles.push(e)}}),this.normalizeLists=!this.tags.some(t=>{if(!/^(ul|ol)\b/.test(t.tag)||!t.node)return!1;let n=e.nodes[t.node];return n.contentMatch.matchType(n)})}parse(e,t={}){let n=new Yq(this,t,!1);return n.addAll(e,uq.none,t.from,t.to),n.finish()}parseSlice(e,t={}){let n=new Yq(this,t,!0);return n.addAll(e,uq.none,t.from,t.to),fq.maxOpen(n.finish())}matchTag(e,t,n){for(let r=n?this.tags.indexOf(n)+1:0;r<this.tags.length;r++){let n=this.tags[r];if(Aje(e,n.tag)&&(n.namespace===void 0||e.namespaceURI==n.namespace)&&(!n.context||t.matchesContext(n.context))){if(n.getAttrs){let t=n.getAttrs(e);if(t===!1)continue;n.attrs=t||void 0}return n}}}matchStyle(e,t,n,r){for(let i=r?this.styles.indexOf(r)+1:0;i<this.styles.length;i++){let r=this.styles[i],a=r.style;if(!(a.indexOf(e)!=0||r.context&&!n.matchesContext(r.context)||a.length>e.length&&(a.charCodeAt(e.length)!=61||a.slice(e.length+1)!=t))){if(r.getAttrs){let e=r.getAttrs(t);if(e===!1)continue;r.attrs=e||void 0}return r}}}static schemaRules(e){let t=[];function n(e){let n=e.priority==null?50:e.priority,r=0;for(;r<t.length;r++){let e=t[r];if((e.priority==null?50:e.priority)<n)break}t.splice(r,0,e)}for(let t in e.marks){let r=e.marks[t].spec.parseDOM;r&&r.forEach(e=>{n(e=Xq(e)),e.mark||e.ignore||e.clearMark||(e.mark=t)})}for(let t in e.nodes){let r=e.nodes[t].spec.parseDOM;r&&r.forEach(e=>{n(e=Xq(e)),e.node||e.ignore||e.mark||(e.node=t)})}return t}static fromSchema(t){return t.cached.domParser||(t.cached.domParser=new e(t,e.schemaRules(t)))}},Hq={address:!0,article:!0,aside:!0,blockquote:!0,body:!0,canvas:!0,dd:!0,div:!0,dl:!0,fieldset:!0,figcaption:!0,figure:!0,footer:!0,form:!0,h1:!0,h2:!0,h3:!0,h4:!0,h5:!0,h6:!0,header:!0,hgroup:!0,hr:!0,li:!0,noscript:!0,ol:!0,output:!0,p:!0,pre:!0,section:!0,table:!0,tfoot:!0,ul:!0},Oje={head:!0,noscript:!0,object:!0,script:!0,style:!0,title:!0},Uq={ol:!0,ul:!0},Wq=1,Gq=2,Kq=4;function qq(e,t,n){return t==null?e&&e.whitespace==`pre`?3:n&-5:(t?Wq:0)|(t===`full`?Gq:0)}var Jq=class{constructor(e,t,n,r,i,a){this.type=e,this.attrs=t,this.marks=n,this.solid=r,this.options=a,this.content=[],this.activeMarks=uq.none,this.match=i||(a&Kq?null:e.contentMatch)}findWrapping(e){if(!this.match){if(!this.type)return[];let t=this.type.contentMatch.fillBefore(oq.from(e));if(t)this.match=this.type.contentMatch.matchFragment(t);else{let t=this.type.contentMatch,n;return(n=t.findWrapping(e.type))?(this.match=t,n):null}}return this.match.findWrapping(e.type)}finish(e){if(!(this.options&Wq)){let e=this.content[this.content.length-1],t;if(e&&e.isText&&(t=/[ \t\r\n\u000c]+$/.exec(e.text))){let n=e;e.text.length==t[0].length?this.content.pop():this.content[this.content.length-1]=n.withText(n.text.slice(0,n.text.length-t[0].length))}}let t=oq.from(this.content);return!e&&this.match&&(t=t.append(this.match.fillBefore(oq.empty,!0))),this.type?this.type.create(this.attrs,t,this.marks):t}inlineContext(e){return this.type?this.type.inlineContent:this.content.length?this.content[0].isInline:e.parentNode&&!Hq.hasOwnProperty(e.parentNode.nodeName.toLowerCase())}},Yq=class{constructor(e,t,n){this.parser=e,this.options=t,this.isOpen=n,this.open=0,this.localPreserveWS=!1;let r=t.topNode,i,a=qq(null,t.preserveWhitespace,0)|(n?Kq:0);i=r?new Jq(r.type,r.attrs,uq.none,!0,t.topMatch||r.type.contentMatch,a):n?new Jq(null,null,uq.none,!0,null,a):new Jq(e.schema.topNodeType,null,uq.none,!0,null,a),this.nodes=[i],this.find=t.findPositions,this.needsBlock=!1}get top(){return this.nodes[this.open]}addDOM(e,t){e.nodeType==3?this.addTextNode(e,t):e.nodeType==1&&this.addElement(e,t)}addTextNode(e,t){let n=e.nodeValue,r=this.top,i=r.options&Gq?`full`:this.localPreserveWS||(r.options&Wq)>0,{schema:a}=this.parser;if(i===`full`||r.inlineContext(e)||/[^ \t\r\n\u000c]/.test(n)){if(!i){if(n=n.replace(/[ \t\r\n\u000c]+/g,` `),/^[ \t\r\n\u000c]/.test(n)&&this.open==this.nodes.length-1){let t=r.content[r.content.length-1],i=e.previousSibling;(!t||i&&i.nodeName==`BR`||t.isText&&/[ \t\r\n\u000c]$/.test(t.text))&&(n=n.slice(1))}}else if(i===`full`)n=n.replace(/\r\n?/g,`
-`);else if(a.linebreakReplacement&&/[\r\n]/.test(n)&&this.top.findWrapping(a.linebreakReplacement.create())){let e=n.split(/\r?\n|\r/);for(let n=0;n<e.length;n++)n&&this.insertNode(a.linebreakReplacement.create(),t,!0),e[n]&&this.insertNode(a.text(e[n]),t,!/\S/.test(e[n]));n=``}else n=n.replace(/\r?\n|\r/g,` `);n&&this.insertNode(a.text(n),t,!/\S/.test(n)),this.findInText(e)}else this.findInside(e)}addElement(e,t,n){let r=this.localPreserveWS,i=this.top;(e.tagName==`PRE`||/pre/.test(e.style&&e.style.whiteSpace))&&(this.localPreserveWS=!0);let a=e.nodeName.toLowerCase(),o;Uq.hasOwnProperty(a)&&this.parser.normalizeLists&&kje(e);let s=this.options.ruleFromNode&&this.options.ruleFromNode(e)||(o=this.parser.matchTag(e,this,n));out:if(s?s.ignore:Oje.hasOwnProperty(a))this.findInside(e),this.ignoreFallback(e,t);else if(!s||s.skip||s.closeParent){s&&s.closeParent?this.open=Math.max(0,this.open-1):s&&s.skip.nodeType&&(e=s.skip);let n,r=this.needsBlock;if(Hq.hasOwnProperty(a))i.content.length&&i.content[0].isInline&&this.open&&(this.open--,i=this.top),n=!0,i.type||(this.needsBlock=!0);else if(!e.firstChild){this.leafFallback(e,t);break out}let o=s&&s.skip?t:this.readStyles(e,t);o&&this.addAll(e,o),n&&this.sync(i),this.needsBlock=r}else{let n=this.readStyles(e,t);n&&this.addElementByRule(e,s,n,s.consuming===!1?o:void 0)}this.localPreserveWS=r}leafFallback(e,t){e.nodeName==`BR`&&this.top.type&&this.top.type.inlineContent&&this.addTextNode(e.ownerDocument.createTextNode(`
-`),t)}ignoreFallback(e,t){e.nodeName==`BR`&&(!this.top.type||!this.top.type.inlineContent)&&this.findPlace(this.parser.schema.text(`-`),t,!0)}readStyles(e,t){let n=e.style;if(n&&n.length)for(let e=0;e<this.parser.matchedStyles.length;e++){let r=this.parser.matchedStyles[e],i=n.getPropertyValue(r);if(i)for(let e;;){let n=this.parser.matchStyle(r,i,this,e);if(!n)break;if(n.ignore)return null;if(t=n.clearMark?t.filter(e=>!n.clearMark(e)):t.concat(this.parser.schema.marks[n.mark].create(n.attrs)),n.consuming===!1)e=n;else break}}return t}addElementByRule(e,t,n,r){let i,a;if(t.node)if(a=this.parser.schema.nodes[t.node],a.isLeaf)this.insertNode(a.create(t.attrs),n,e.nodeName==`BR`)||this.leafFallback(e,n);else{let e=this.enter(a,t.attrs||null,n,t.preserveWhitespace);e&&(i=!0,n=e)}else{let e=this.parser.schema.marks[t.mark];n=n.concat(e.create(t.attrs))}let o=this.top;if(a&&a.isLeaf)this.findInside(e);else if(r)this.addElement(e,n,r);else if(t.getContent)this.findInside(e),t.getContent(e,this.parser.schema).forEach(e=>this.insertNode(e,n,!1));else{let r=e;typeof t.contentElement==`string`?r=e.querySelector(t.contentElement):typeof t.contentElement==`function`?r=t.contentElement(e):t.contentElement&&(r=t.contentElement),this.findAround(e,r,!0),this.addAll(r,n),this.findAround(e,r,!1)}i&&this.sync(o)&&this.open--}addAll(e,t,n,r){let i=n||0;for(let a=n?e.childNodes[n]:e.firstChild,o=r==null?null:e.childNodes[r];a!=o;a=a.nextSibling,++i)this.findAtPoint(e,i),this.addDOM(a,t);this.findAtPoint(e,i)}findPlace(e,t,n){let r,i;for(let t=this.open,a=0;t>=0;t--){let o=this.nodes[t],s=o.findWrapping(e);if(s&&(!r||r.length>s.length+a)&&(r=s,i=o,!s.length))break;if(o.solid){if(n)break;a+=2}}if(!r)return null;this.sync(i);for(let e=0;e<r.length;e++)t=this.enterInner(r[e],null,t,!1);return t}insertNode(e,t,n){if(e.isInline&&this.needsBlock&&!this.top.type){let e=this.textblockFromContext();e&&(t=this.enterInner(e,null,t))}let r=this.findPlace(e,t,n);if(r){this.closeExtra();let t=this.top;t.match&&=t.match.matchType(e.type);let n=uq.none;for(let i of r.concat(e.marks))(t.type?t.type.allowsMarkType(i.type):Zq(i.type,e.type))&&(n=i.addToSet(n));return t.content.push(e.mark(n)),!0}return!1}enter(e,t,n,r){let i=this.findPlace(e.create(t),n,!1);return i&&=this.enterInner(e,t,n,!0,r),i}enterInner(e,t,n,r=!1,i){this.closeExtra();let a=this.top;a.match=a.match&&a.match.matchType(e);let o=qq(e,i,a.options);a.options&Kq&&a.content.length==0&&(o|=Kq);let s=uq.none;return n=n.filter(t=>(a.type?a.type.allowsMarkType(t.type):Zq(t.type,e))?(s=t.addToSet(s),!1):!0),this.nodes.push(new Jq(e,t,s,r,null,o)),this.open++,n}closeExtra(e=!1){let t=this.nodes.length-1;if(t>this.open){for(;t>this.open;t--)this.nodes[t-1].content.push(this.nodes[t].finish(e));this.nodes.length=this.open+1}}finish(){return this.open=0,this.closeExtra(this.isOpen),this.nodes[0].finish(!!(this.isOpen||this.options.topOpen))}sync(e){for(let t=this.open;t>=0;t--)if(this.nodes[t]==e)return this.open=t,!0;else this.localPreserveWS&&(this.nodes[t].options|=Wq);return!1}get currentPos(){this.closeExtra();let e=0;for(let t=this.open;t>=0;t--){let n=this.nodes[t].content;for(let t=n.length-1;t>=0;t--)e+=n[t].nodeSize;t&&e++}return e}findAtPoint(e,t){if(this.find)for(let n=0;n<this.find.length;n++)this.find[n].node==e&&this.find[n].offset==t&&(this.find[n].pos=this.currentPos)}findInside(e){if(this.find)for(let t=0;t<this.find.length;t++)this.find[t].pos==null&&e.nodeType==1&&e.contains(this.find[t].node)&&(this.find[t].pos=this.currentPos)}findAround(e,t,n){if(e!=t&&this.find)for(let r=0;r<this.find.length;r++)this.find[r].pos==null&&e.nodeType==1&&e.contains(this.find[r].node)&&t.compareDocumentPosition(this.find[r].node)&(n?2:4)&&(this.find[r].pos=this.currentPos)}findInText(e){if(this.find)for(let t=0;t<this.find.length;t++)this.find[t].node==e&&(this.find[t].pos=this.currentPos-(e.nodeValue.length-this.find[t].offset))}matchesContext(e){if(e.indexOf(`|`)>-1)return e.split(/\s*\|\s*/).some(this.matchesContext,this);let t=e.split(`/`),n=this.options.context,r=!this.isOpen&&(!n||n.parent.type==this.nodes[0].type),i=-(n?n.depth+1:0)+ +!r,a=(e,o)=>{for(;e>=0;e--){let s=t[e];if(s==``){if(e==t.length-1||e==0)continue;for(;o>=i;o--)if(a(e-1,o))return!0;return!1}else{let e=o>0||o==0&&r?this.nodes[o].type:n&&o>=i?n.node(o-i).type:null;if(!e||e.name!=s&&!e.isInGroup(s))return!1;o--}}return!0};return a(t.length-1,this.open)}textblockFromContext(){let e=this.options.context;if(e)for(let t=e.depth;t>=0;t--){let n=e.node(t).contentMatchAt(e.indexAfter(t)).defaultType;if(n&&n.isTextblock&&n.defaultAttrs)return n}for(let e in this.parser.schema.nodes){let t=this.parser.schema.nodes[e];if(t.isTextblock&&t.defaultAttrs)return t}}};function kje(e){for(let t=e.firstChild,n=null;t;t=t.nextSibling){let e=t.nodeType==1?t.nodeName.toLowerCase():null;e&&Uq.hasOwnProperty(e)&&n?(n.appendChild(t),t=n):e==`li`?n=t:e&&(n=null)}}function Aje(e,t){return(e.matches||e.msMatchesSelector||e.webkitMatchesSelector||e.mozMatchesSelector).call(e,t)}function Xq(e){let t={};for(let n in e)t[n]=e[n];return t}function Zq(e,t){let n=t.schema.nodes;for(let r in n){let i=n[r];if(!i.allowsMarkType(e))continue;let a=[],o=e=>{a.push(e);for(let n=0;n<e.edgeCount;n++){let{type:r,next:i}=e.edge(n);if(r==t||a.indexOf(i)<0&&o(i))return!0}};if(o(i.contentMatch))return!0}}var Qq=class e{constructor(e,t){this.nodes=e,this.marks=t}serializeFragment(e,t={},n){n||=eJ(t).createDocumentFragment();let r=n,i=[];return e.forEach(e=>{if(i.length||e.marks.length){let n=0,a=0;for(;n<i.length&&a<e.marks.length;){let t=e.marks[a];if(!this.marks[t.type.name]){a++;continue}if(!t.eq(i[n][0])||t.type.spec.spanning===!1)break;n++,a++}for(;n<i.length;)r=i.pop()[1];for(;a<e.marks.length;){let n=e.marks[a++],o=this.serializeMark(n,e.isInline,t);o&&(i.push([n,r]),r.appendChild(o.dom),r=o.contentDOM||o.dom)}}r.appendChild(this.serializeNodeInner(e,t))}),n}serializeNodeInner(e,t){if(e.isText)return eJ(t).createTextNode(e.text);let{dom:n,contentDOM:r}=nJ(eJ(t),this.nodes[e.type.name](e),null,e.attrs);if(r){if(e.isLeaf)throw RangeError(`Content hole not allowed in a leaf node spec`);this.serializeFragment(e.content,t,r)}return n}serializeNode(e,t={}){let n=this.serializeNodeInner(e,t);for(let r=e.marks.length-1;r>=0;r--){let i=this.serializeMark(e.marks[r],e.isInline,t);i&&((i.contentDOM||i.dom).appendChild(n),n=i.dom)}return n}serializeMark(e,t,n={}){let r=this.marks[e.type.name];return r&&nJ(eJ(n),r(e,t),null,e.attrs)}static renderSpec(e,t,n=null,r){return typeof t==`string`?{dom:e.createTextNode(t)}:nJ(e,t,n,r)}static fromSchema(t){return t.cached.domSerializer||(t.cached.domSerializer=new e(this.nodesFromSchema(t),this.marksFromSchema(t)))}static nodesFromSchema(e){let t=$q(e.nodes);return t.text||=e=>e.text,t}static marksFromSchema(e){return $q(e.marks)}};function $q(e){let t={};for(let n in e){let r=e[n].spec.toDOM;r&&(t[n]=r)}return t}function eJ(e){return e.document||window.document}var tJ=new WeakMap;function jje(e){let t=tJ.get(e);return t===void 0&&tJ.set(e,t=Mje(e)),t}function Mje(e){let t=null;function n(e){if(e&&typeof e==`object`)if(Array.isArray(e))if(typeof e[0]==`string`)t||=[],t.push(e);else for(let t=0;t<e.length;t++)n(e[t]);else for(let t in e)n(e[t])}return n(e),t}function nJ(e,t,n,r){if(t.nodeType==1)return{dom:t};if(t.dom&&t.dom.nodeType==1)return t;let i=t[0],a;if(typeof i!=`string`)throw RangeError(`Invalid array passed to renderSpec`);if(r&&(a=jje(r))&&a.indexOf(t)>-1)throw RangeError(`Using an array from an attribute object as a DOM spec. This may be an attempted cross site scripting attack.`);let o=i.indexOf(` `);o>0&&(n=i.slice(0,o),i=i.slice(o+1));let s,c=n?e.createElementNS(n,i):e.createElement(i),l=t[1],u=1;if(l&&typeof l==`object`&&l.nodeType==null&&!Array.isArray(l)){u=2;for(let e in l)if(l[e]!=null){let t=e.indexOf(` `);t>0?c.setAttributeNS(e.slice(0,t),e.slice(t+1),l[e]):e==`style`&&c.style?c.style.cssText=l[e]:c.setAttribute(e,l[e])}}for(let i=u;i<t.length;i++){let a=t[i];if(a===0){if(i<t.length-1||i>u)throw RangeError(`Content hole must be the only child of its parent node`);return{dom:c,contentDOM:c}}else if(typeof a==`string`)c.appendChild(e.createTextNode(a));else{let{dom:t,contentDOM:i}=nJ(e,a,n,r);if(c.appendChild(t),i){if(s)throw RangeError(`Multiple content holes`);s=i}}}return{dom:c,contentDOM:s}}var rJ=65535,iJ=2**16;function Nje(e,t){return e+t*iJ}function aJ(e){return e&rJ}function Pje(e){return(e-(e&rJ))/iJ}var Fje=1,Ije=2,oJ=4,sJ=8,cJ=class{constructor(e,t,n){this.pos=e,this.delInfo=t,this.recover=n}get deleted(){return(this.delInfo&sJ)>0}get deletedBefore(){return(this.delInfo&5)>0}get deletedAfter(){return(this.delInfo&6)>0}get deletedAcross(){return(this.delInfo&oJ)>0}},lJ=class e{constructor(t,n=!1){if(this.ranges=t,this.inverted=n,!t.length&&e.empty)return e.empty}recover(e){let t=0,n=aJ(e);if(!this.inverted)for(let e=0;e<n;e++)t+=this.ranges[e*3+2]-this.ranges[e*3+1];return this.ranges[n*3]+t+Pje(e)}mapResult(e,t=1){return this._map(e,t,!1)}map(e,t=1){return this._map(e,t,!0)}_map(e,t,n){let r=0,i=this.inverted?2:1,a=this.inverted?1:2;for(let o=0;o<this.ranges.length;o+=3){let s=this.ranges[o]-(this.inverted?r:0);if(s>e)break;let c=this.ranges[o+i],l=this.ranges[o+a],u=s+c;if(e<=u){let i=c?e==s?-1:e==u?1:t:t,a=s+r+(i<0?0:l);if(n)return a;let d=e==(t<0?s:u)?null:Nje(o/3,e-s),f=e==s?Ije:e==u?Fje:oJ;return(t<0?e!=s:e!=u)&&(f|=sJ),new cJ(a,f,d)}r+=l-c}return n?e+r:new cJ(e+r,0,null)}touches(e,t){let n=0,r=aJ(t),i=this.inverted?2:1,a=this.inverted?1:2;for(let t=0;t<this.ranges.length;t+=3){let o=this.ranges[t]-(this.inverted?n:0);if(o>e)break;let s=this.ranges[t+i];if(e<=o+s&&t==r*3)return!0;n+=this.ranges[t+a]-s}return!1}forEach(e){let t=this.inverted?2:1,n=this.inverted?1:2;for(let r=0,i=0;r<this.ranges.length;r+=3){let a=this.ranges[r],o=a-(this.inverted?i:0),s=a+(this.inverted?0:i),c=this.ranges[r+t],l=this.ranges[r+n];e(o,o+c,s,s+l),i+=l-c}}invert(){return new e(this.ranges,!this.inverted)}toString(){return(this.inverted?`-`:``)+JSON.stringify(this.ranges)}static offset(t){return t==0?e.empty:new e(t<0?[0,-t,0]:[0,0,t])}};lJ.empty=new lJ([]);var uJ=class e{constructor(e,t,n=0,r=e?e.length:0){this.mirror=t,this.from=n,this.to=r,this._maps=e||[],this.ownData=!(e||t)}get maps(){return this._maps}slice(t=0,n=this.maps.length){return new e(this._maps,this.mirror,t,n)}appendMap(e,t){this.ownData||=(this._maps=this._maps.slice(),this.mirror=this.mirror&&this.mirror.slice(),!0),this.to=this._maps.push(e),t!=null&&this.setMirror(this._maps.length-1,t)}appendMapping(e){for(let t=0,n=this._maps.length;t<e._maps.length;t++){let r=e.getMirror(t);this.appendMap(e._maps[t],r!=null&&r<t?n+r:void 0)}}getMirror(e){if(this.mirror){for(let t=0;t<this.mirror.length;t++)if(this.mirror[t]==e)return this.mirror[t+(t%2?-1:1)]}}setMirror(e,t){this.mirror||=[],this.mirror.push(e,t)}appendMappingInverted(e){for(let t=e.maps.length-1,n=this._maps.length+e._maps.length;t>=0;t--){let r=e.getMirror(t);this.appendMap(e._maps[t].invert(),r!=null&&r>t?n-r-1:void 0)}}invert(){let t=new e;return t.appendMappingInverted(this),t}map(e,t=1){if(this.mirror)return this._map(e,t,!0);for(let n=this.from;n<this.to;n++)e=this._maps[n].map(e,t);return e}mapResult(e,t=1){return this._map(e,t,!1)}_map(e,t,n){let r=0;for(let n=this.from;n<this.to;n++){let i=this._maps[n].mapResult(e,t);if(i.recover!=null){let t=this.getMirror(n);if(t!=null&&t>n&&t<this.to){n=t,e=this._maps[t].recover(i.recover);continue}}r|=i.delInfo,e=i.pos}return n?e:new cJ(e,r,null)}},dJ=Object.create(null),fJ=class{getMap(){return lJ.empty}merge(e){return null}static fromJSON(e,t){if(!t||!t.stepType)throw RangeError(`Invalid input for Step.fromJSON`);let n=dJ[t.stepType];if(!n)throw RangeError(`No step type ${t.stepType} defined`);return n.fromJSON(e,t)}static jsonID(e,t){if(e in dJ)throw RangeError(`Duplicate use of step JSON ID `+e);return dJ[e]=t,t.prototype.jsonID=e,t}},pJ=class e{constructor(e,t){this.doc=e,this.failed=t}static ok(t){return new e(t,null)}static fail(t){return new e(null,t)}static fromReplace(t,n,r,i){try{return e.ok(t.replace(n,r,i))}catch(t){if(t instanceof dq)return e.fail(t.message);throw t}}};function mJ(e,t,n){let r=[];for(let i=0;i<e.childCount;i++){let a=e.child(i);a.content.size&&(a=a.copy(mJ(a.content,t,a))),a.isInline&&(a=t(a,n,i)),r.push(a)}return oq.fromArray(r)}var hJ=class e extends fJ{constructor(e,t,n){super(),this.from=e,this.to=t,this.mark=n}apply(e){let t=e.slice(this.from,this.to),n=e.resolve(this.from),r=n.node(n.sharedDepth(this.to)),i=new fq(mJ(t.content,(e,t)=>!e.isAtom||!t.type.allowsMarkType(this.mark.type)?e:e.mark(this.mark.addToSet(e.marks)),r),t.openStart,t.openEnd);return pJ.fromReplace(e,this.from,this.to,i)}invert(){return new gJ(this.from,this.to,this.mark)}map(t){let n=t.mapResult(this.from,1),r=t.mapResult(this.to,-1);return n.deleted&&r.deleted||n.pos>=r.pos?null:new e(n.pos,r.pos,this.mark)}merge(t){return t instanceof e&&t.mark.eq(this.mark)&&this.from<=t.to&&this.to>=t.from?new e(Math.min(this.from,t.from),Math.max(this.to,t.to),this.mark):null}toJSON(){return{stepType:`addMark`,mark:this.mark.toJSON(),from:this.from,to:this.to}}static fromJSON(t,n){if(typeof n.from!=`number`||typeof n.to!=`number`)throw RangeError(`Invalid input for AddMarkStep.fromJSON`);return new e(n.from,n.to,t.markFromJSON(n.mark))}};fJ.jsonID(`addMark`,hJ);var gJ=class e extends fJ{constructor(e,t,n){super(),this.from=e,this.to=t,this.mark=n}apply(e){let t=e.slice(this.from,this.to),n=new fq(mJ(t.content,e=>e.mark(this.mark.removeFromSet(e.marks)),e),t.openStart,t.openEnd);return pJ.fromReplace(e,this.from,this.to,n)}invert(){return new hJ(this.from,this.to,this.mark)}map(t){let n=t.mapResult(this.from,1),r=t.mapResult(this.to,-1);return n.deleted&&r.deleted||n.pos>=r.pos?null:new e(n.pos,r.pos,this.mark)}merge(t){return t instanceof e&&t.mark.eq(this.mark)&&this.from<=t.to&&this.to>=t.from?new e(Math.min(this.from,t.from),Math.max(this.to,t.to),this.mark):null}toJSON(){return{stepType:`removeMark`,mark:this.mark.toJSON(),from:this.from,to:this.to}}static fromJSON(t,n){if(typeof n.from!=`number`||typeof n.to!=`number`)throw RangeError(`Invalid input for RemoveMarkStep.fromJSON`);return new e(n.from,n.to,t.markFromJSON(n.mark))}};fJ.jsonID(`removeMark`,gJ);var _J=class e extends fJ{constructor(e,t){super(),this.pos=e,this.mark=t}apply(e){let t=e.nodeAt(this.pos);if(!t)return pJ.fail(`No node at mark step's position`);let n=t.type.create(t.attrs,null,this.mark.addToSet(t.marks));return pJ.fromReplace(e,this.pos,this.pos+1,new fq(oq.from(n),0,+!t.isLeaf))}invert(t){let n=t.nodeAt(this.pos);if(n){let t=this.mark.addToSet(n.marks);if(t.length==n.marks.length){for(let r=0;r<n.marks.length;r++)if(!n.marks[r].isInSet(t))return new e(this.pos,n.marks[r]);return new e(this.pos,this.mark)}}return new vJ(this.pos,this.mark)}map(t){let n=t.mapResult(this.pos,1);return n.deletedAfter?null:new e(n.pos,this.mark)}toJSON(){return{stepType:`addNodeMark`,pos:this.pos,mark:this.mark.toJSON()}}static fromJSON(t,n){if(typeof n.pos!=`number`)throw RangeError(`Invalid input for AddNodeMarkStep.fromJSON`);return new e(n.pos,t.markFromJSON(n.mark))}};fJ.jsonID(`addNodeMark`,_J);var vJ=class e extends fJ{constructor(e,t){super(),this.pos=e,this.mark=t}apply(e){let t=e.nodeAt(this.pos);if(!t)return pJ.fail(`No node at mark step's position`);let n=t.type.create(t.attrs,null,this.mark.removeFromSet(t.marks));return pJ.fromReplace(e,this.pos,this.pos+1,new fq(oq.from(n),0,+!t.isLeaf))}invert(e){let t=e.nodeAt(this.pos);return!t||!this.mark.isInSet(t.marks)?this:new _J(this.pos,this.mark)}map(t){let n=t.mapResult(this.pos,1);return n.deletedAfter?null:new e(n.pos,this.mark)}toJSON(){return{stepType:`removeNodeMark`,pos:this.pos,mark:this.mark.toJSON()}}static fromJSON(t,n){if(typeof n.pos!=`number`)throw RangeError(`Invalid input for RemoveNodeMarkStep.fromJSON`);return new e(n.pos,t.markFromJSON(n.mark))}};fJ.jsonID(`removeNodeMark`,vJ);var yJ=class e extends fJ{constructor(e,t,n,r=!1){super(),this.from=e,this.to=t,this.slice=n,this.structure=r}apply(e){return this.structure&&xJ(e,this.from,this.to)?pJ.fail(`Structure replace would overwrite content`):pJ.fromReplace(e,this.from,this.to,this.slice)}getMap(){return new lJ([this.from,this.to-this.from,this.slice.size])}invert(t){return new e(this.from,this.from+this.slice.size,t.slice(this.from,this.to))}map(t){let n=t.mapResult(this.to,-1),r=this.from==this.to&&e.MAP_BIAS<0?n:t.mapResult(this.from,1);return r.deletedAcross&&n.deletedAcross?null:new e(r.pos,Math.max(r.pos,n.pos),this.slice,this.structure)}merge(t){if(!(t instanceof e)||t.structure||this.structure)return null;if(this.from+this.slice.size==t.from&&!this.slice.openEnd&&!t.slice.openStart){let n=this.slice.size+t.slice.size==0?fq.empty:new fq(this.slice.content.append(t.slice.content),this.slice.openStart,t.slice.openEnd);return new e(this.from,this.to+(t.to-t.from),n,this.structure)}else if(t.to==this.from&&!this.slice.openStart&&!t.slice.openEnd){let n=this.slice.size+t.slice.size==0?fq.empty:new fq(t.slice.content.append(this.slice.content),t.slice.openStart,this.slice.openEnd);return new e(t.from,this.to,n,this.structure)}else return null}toJSON(){let e={stepType:`replace`,from:this.from,to:this.to};return this.slice.size&&(e.slice=this.slice.toJSON()),this.structure&&(e.structure=!0),e}static fromJSON(t,n){if(typeof n.from!=`number`||typeof n.to!=`number`)throw RangeError(`Invalid input for ReplaceStep.fromJSON`);return new e(n.from,n.to,fq.fromJSON(t,n.slice),!!n.structure)}};yJ.MAP_BIAS=1,fJ.jsonID(`replace`,yJ);var bJ=class e extends fJ{constructor(e,t,n,r,i,a,o=!1){super(),this.from=e,this.to=t,this.gapFrom=n,this.gapTo=r,this.slice=i,this.insert=a,this.structure=o}apply(e){if(this.structure&&(xJ(e,this.from,this.gapFrom)||xJ(e,this.gapTo,this.to)))return pJ.fail(`Structure gap-replace would overwrite content`);let t=e.slice(this.gapFrom,this.gapTo);if(t.openStart||t.openEnd)return pJ.fail(`Gap is not a flat range`);let n=this.slice.insertAt(this.insert,t.content);return n?pJ.fromReplace(e,this.from,this.to,n):pJ.fail(`Content does not fit in gap`)}getMap(){return new lJ([this.from,this.gapFrom-this.from,this.insert,this.gapTo,this.to-this.gapTo,this.slice.size-this.insert])}invert(t){let n=this.gapTo-this.gapFrom;return new e(this.from,this.from+this.slice.size+n,this.from+this.insert,this.from+this.insert+n,t.slice(this.from,this.to).removeBetween(this.gapFrom-this.from,this.gapTo-this.from),this.gapFrom-this.from,this.structure)}map(t){let n=t.mapResult(this.from,1),r=t.mapResult(this.to,-1),i=this.from==this.gapFrom?n.pos:t.map(this.gapFrom,-1),a=this.to==this.gapTo?r.pos:t.map(this.gapTo,1);return n.deletedAcross&&r.deletedAcross||i<n.pos||a>r.pos?null:new e(n.pos,r.pos,i,a,this.slice,this.insert,this.structure)}toJSON(){let e={stepType:`replaceAround`,from:this.from,to:this.to,gapFrom:this.gapFrom,gapTo:this.gapTo,insert:this.insert};return this.slice.size&&(e.slice=this.slice.toJSON()),this.structure&&(e.structure=!0),e}static fromJSON(t,n){if(typeof n.from!=`number`||typeof n.to!=`number`||typeof n.gapFrom!=`number`||typeof n.gapTo!=`number`||typeof n.insert!=`number`)throw RangeError(`Invalid input for ReplaceAroundStep.fromJSON`);return new e(n.from,n.to,n.gapFrom,n.gapTo,fq.fromJSON(t,n.slice),n.insert,!!n.structure)}};fJ.jsonID(`replaceAround`,bJ);function xJ(e,t,n){let r=e.resolve(t),i=n-t,a=r.depth;for(;i>0&&a>0&&r.indexAfter(a)==r.node(a).childCount;)a--,i--;if(i>0){let e=r.node(a).maybeChild(r.indexAfter(a));for(;i>0;){if(!e||e.isLeaf)return!0;e=e.firstChild,i--}}return!1}function Lje(e,t,n,r){let i=[],a=[],o,s;e.doc.nodesBetween(t,n,(e,c,l)=>{if(!e.isInline)return;let u=e.marks;if(!r.isInSet(u)&&l.type.allowsMarkType(r.type)){let l=Math.max(c,t),d=Math.min(c+e.nodeSize,n),f=r.addToSet(u);for(let e=0;e<u.length;e++)u[e].isInSet(f)||(o&&o.to==l&&o.mark.eq(u[e])?o.to=d:i.push(o=new gJ(l,d,u[e])));s&&s.to==l?s.to=d:a.push(s=new hJ(l,d,r))}}),i.forEach(t=>e.step(t)),a.forEach(t=>e.step(t))}function Rje(e,t,n,r){let i=[],a=0;e.doc.nodesBetween(t,n,(e,o)=>{if(!e.isInline)return;a++;let s=null;if(r instanceof Rq){let t=e.marks,n;for(;n=r.isInSet(t);)(s||=[]).push(n),t=n.removeFromSet(t)}else r?r.isInSet(e.marks)&&(s=[r]):s=e.marks;if(s&&s.length){let r=Math.min(o+e.nodeSize,n);for(let e=0;e<s.length;e++){let n=s[e],c;for(let e=0;e<i.length;e++){let t=i[e];t.step==a-1&&n.eq(i[e].style)&&(c=t)}c?(c.to=r,c.step=a):i.push({style:n,from:Math.max(o,t),to:r,step:a})}}}),i.forEach(t=>e.step(new gJ(t.from,t.to,t.style)))}function SJ(e,t,n,r=n.contentMatch,i=!0){let a=e.doc.nodeAt(t),o=[],s=t+1;for(let t=0;t<a.childCount;t++){let c=a.child(t),l=s+c.nodeSize,u=r.matchType(c.type);if(!u)o.push(new yJ(s,l,fq.empty));else{r=u;for(let t=0;t<c.marks.length;t++)n.allowsMarkType(c.marks[t].type)||e.step(new gJ(s,l,c.marks[t]));if(i&&c.isText&&n.whitespace!=`pre`){let e,t=/\r?\n|\r/g,r;for(;e=t.exec(c.text);)r||=new fq(oq.from(n.schema.text(` `,n.allowedMarks(c.marks))),0,0),o.push(new yJ(s+e.index,s+e.index+e[0].length,r))}}s=l}if(!r.validEnd){let t=r.fillBefore(oq.empty,!0);e.replace(s,s,new fq(t,0,0))}for(let t=o.length-1;t>=0;t--)e.step(o[t])}function zje(e,t,n){return(t==0||e.canReplace(t,e.childCount))&&(n==e.childCount||e.canReplace(0,n))}function CJ(e){let t=e.parent.content.cutByIndex(e.startIndex,e.endIndex);for(let n=e.depth,r=0,i=0;;--n){let a=e.$from.node(n),o=e.$from.index(n)+r,s=e.$to.indexAfter(n)-i;if(n<e.depth&&a.canReplace(o,s,t))return n;if(n==0||a.type.spec.isolating||!zje(a,o,s))break;o&&(r=1),s<a.childCount&&(i=1)}return null}function Bje(e,t,n){let{$from:r,$to:i,depth:a}=t,o=r.before(a+1),s=i.after(a+1),c=o,l=s,u=oq.empty,d=0;for(let e=a,t=!1;e>n;e--)t||r.index(e)>0?(t=!0,u=oq.from(r.node(e).copy(u)),d++):c--;let f=oq.empty,p=0;for(let e=a,t=!1;e>n;e--)t||i.after(e+1)<i.end(e)?(t=!0,f=oq.from(i.node(e).copy(f)),p++):l++;e.step(new bJ(c,l,o,s,new fq(u.append(f),d,p),u.size-d,!0))}function wJ(e,t,n=null,r=e){let i=Vje(e,t),a=i&&Hje(r,t);return a?i.map(TJ).concat({type:t,attrs:n}).concat(a.map(TJ)):null}function TJ(e){return{type:e,attrs:null}}function Vje(e,t){let{parent:n,startIndex:r,endIndex:i}=e,a=n.contentMatchAt(r).findWrapping(t);if(!a)return null;let o=a.length?a[0]:t;return n.canReplaceWith(r,i,o)?a:null}function Hje(e,t){let{parent:n,startIndex:r,endIndex:i}=e,a=n.child(r),o=t.contentMatch.findWrapping(a.type);if(!o)return null;let s=(o.length?o[o.length-1]:t).contentMatch;for(let e=r;s&&e<i;e++)s=s.matchType(n.child(e).type);return!s||!s.validEnd?null:o}function Uje(e,t,n){let r=oq.empty;for(let e=n.length-1;e>=0;e--){if(r.size){let t=n[e].type.contentMatch.matchFragment(r);if(!t||!t.validEnd)throw RangeError(`Wrapper type given to Transform.wrap does not form valid content of its parent wrapper`)}r=oq.from(n[e].type.create(n[e].attrs,r))}let i=t.start,a=t.end;e.step(new bJ(i,a,i,a,new fq(r,0,0),n.length,!0))}function Wje(e,t,n,r,i){if(!r.isTextblock)throw RangeError(`Type given to setBlockType should be a textblock`);let a=e.steps.length;e.doc.nodesBetween(t,n,(t,n)=>{let o=typeof i==`function`?i(t):i;if(t.isTextblock&&!t.hasMarkup(r,o)&&Gje(e.doc,e.mapping.slice(a).map(n),r)){let i=null;if(r.schema.linebreakReplacement){let e=r.whitespace==`pre`,t=!!r.contentMatch.matchType(r.schema.linebreakReplacement);e&&!t?i=!1:!e&&t&&(i=!0)}i===!1&&DJ(e,t,n,a),SJ(e,e.mapping.slice(a).map(n,1),r,void 0,i===null);let s=e.mapping.slice(a),c=s.map(n,1),l=s.map(n+t.nodeSize,1);return e.step(new bJ(c,l,c+1,l-1,new fq(oq.from(r.create(o,null,t.marks)),0,0),1,!0)),i===!0&&EJ(e,t,n,a),!1}})}function EJ(e,t,n,r){t.forEach((i,a)=>{if(i.isText){let o,s=/\r?\n|\r/g;for(;o=s.exec(i.text);){let i=e.mapping.slice(r).map(n+1+a+o.index);e.replaceWith(i,i+1,t.type.schema.linebreakReplacement.create())}}})}function DJ(e,t,n,r){t.forEach((i,a)=>{if(i.type==i.type.schema.linebreakReplacement){let i=e.mapping.slice(r).map(n+1+a);e.replaceWith(i,i+1,t.type.schema.text(`
-`))}})}function Gje(e,t,n){let r=e.resolve(t),i=r.index();return r.parent.canReplaceWith(i,i+1,n)}function Kje(e,t,n,r,i){let a=e.doc.nodeAt(t);if(!a)throw RangeError(`No node at given position`);n||=a.type;let o=n.create(r,null,i||a.marks);if(a.isLeaf)return e.replaceWith(t,t+a.nodeSize,o);if(!n.validContent(a.content))throw RangeError(`Invalid content for node type `+n.name);e.step(new bJ(t,t+a.nodeSize,t+1,t+a.nodeSize-1,new fq(oq.from(o),0,0),1,!0))}function OJ(e,t,n=1,r){let i=e.resolve(t),a=i.depth-n,o=r&&r[r.length-1]||i.parent;if(a<0||i.parent.type.spec.isolating||!i.parent.canReplace(i.index(),i.parent.childCount)||!o.type.validContent(i.parent.content.cutByIndex(i.index(),i.parent.childCount)))return!1;for(let e=i.depth-1,t=n-2;e>a;e--,t--){let n=i.node(e),a=i.index(e);if(n.type.spec.isolating)return!1;let o=n.content.cutByIndex(a,n.childCount),s=r&&r[t+1];s&&(o=o.replaceChild(0,s.type.create(s.attrs)));let c=r&&r[t]||n;if(!n.canReplace(a+1,n.childCount)||!c.type.validContent(o))return!1}let s=i.indexAfter(a),c=r&&r[0];return i.node(a).canReplaceWith(s,s,c?c.type:i.node(a+1).type)}function qje(e,t,n=1,r){let i=e.doc.resolve(t),a=oq.empty,o=oq.empty;for(let e=i.depth,t=i.depth-n,s=n-1;e>t;e--,s--){a=oq.from(i.node(e).copy(a));let t=r&&r[s];o=oq.from(t?t.type.create(t.attrs,o):i.node(e).copy(o))}e.step(new yJ(t,t,new fq(a.append(o),n,n),!0))}function kJ(e,t){let n=e.resolve(t),r=n.index();return AJ(n.nodeBefore,n.nodeAfter)&&n.parent.canReplace(r,r+1)}function Jje(e,t){t.content.size||e.type.compatibleContent(t.type);let n=e.contentMatchAt(e.childCount),{linebreakReplacement:r}=e.type.schema;for(let i=0;i<t.childCount;i++){let a=t.child(i),o=a.type==r?e.type.schema.nodes.text:a.type;if(n=n.matchType(o),!n||!e.type.allowsMarks(a.marks))return!1}return n.validEnd}function AJ(e,t){return!!(e&&t&&!e.isLeaf&&Jje(e,t))}function jJ(e,t,n=-1){let r=e.resolve(t);for(let e=r.depth;;e--){let i,a,o=r.index(e);if(e==r.depth?(i=r.nodeBefore,a=r.nodeAfter):n>0?(i=r.node(e+1),o++,a=r.node(e).maybeChild(o)):(i=r.node(e).maybeChild(o-1),a=r.node(e+1)),i&&!i.isTextblock&&AJ(i,a)&&r.node(e).canReplace(o,o+1))return t;if(e==0)break;t=n<0?r.before(e):r.after(e)}}function Yje(e,t,n){let r=null,{linebreakReplacement:i}=e.doc.type.schema,a=e.doc.resolve(t-n),o=a.node().type;if(i&&o.inlineContent){let e=o.whitespace==`pre`,t=!!o.contentMatch.matchType(i);e&&!t?r=!1:!e&&t&&(r=!0)}let s=e.steps.length;if(r===!1){let r=e.doc.resolve(t+n);DJ(e,r.node(),r.before(),s)}o.inlineContent&&SJ(e,t+n-1,o,a.node().contentMatchAt(a.index()),r==null);let c=e.mapping.slice(s),l=c.map(t-n);if(e.step(new yJ(l,c.map(t+n,-1),fq.empty,!0)),r===!0){let t=e.doc.resolve(l);EJ(e,t.node(),t.before(),e.steps.length)}return e}function Xje(e,t,n){let r=e.resolve(t);if(r.parent.canReplaceWith(r.index(),r.index(),n))return t;if(r.parentOffset==0)for(let e=r.depth-1;e>=0;e--){let t=r.index(e);if(r.node(e).canReplaceWith(t,t,n))return r.before(e+1);if(t>0)return null}if(r.parentOffset==r.parent.content.size)for(let e=r.depth-1;e>=0;e--){let t=r.indexAfter(e);if(r.node(e).canReplaceWith(t,t,n))return r.after(e+1);if(t<r.node(e).childCount)return null}return null}function MJ(e,t,n){let r=e.resolve(t);if(!n.content.size)return t;let i=n.content;for(let e=0;e<n.openStart;e++)i=i.firstChild.content;for(let e=1;e<=(n.openStart==0&&n.size?2:1);e++)for(let t=r.depth;t>=0;t--){let n=t==r.depth?0:r.pos<=(r.start(t+1)+r.end(t+1))/2?-1:1,a=r.index(t)+ +(n>0),o=r.node(t),s=!1;if(e==1)s=o.canReplace(a,a,i);else{let e=o.contentMatchAt(a).findWrapping(i.firstChild.type);s=e&&o.canReplaceWith(a,a,e[0])}if(s)return n==0?r.pos:n<0?r.before(t+1):r.after(t+1)}return null}function NJ(e,t,n=t,r=fq.empty){if(t==n&&!r.size)return null;let i=e.resolve(t),a=e.resolve(n);return PJ(i,a,r)?new yJ(t,n,r):new Zje(i,a,r).fit()}function PJ(e,t,n){return!n.openStart&&!n.openEnd&&e.start()==t.start()&&e.parent.canReplace(e.index(),t.index(),n.content)}var Zje=class{constructor(e,t,n){this.$from=e,this.$to=t,this.unplaced=n,this.frontier=[],this.placed=oq.empty;for(let t=0;t<=e.depth;t++){let n=e.node(t);this.frontier.push({type:n.type,match:n.contentMatchAt(e.indexAfter(t))})}for(let t=e.depth;t>0;t--)this.placed=oq.from(e.node(t).copy(this.placed))}get depth(){return this.frontier.length-1}fit(){for(;this.unplaced.size;){let e=this.findFittable();e?this.placeNodes(e):this.openMore()||this.dropNode()}let e=this.mustMoveInline(),t=this.placed.size-this.depth-this.$from.depth,n=this.$from,r=this.close(e<0?this.$to:n.doc.resolve(e));if(!r)return null;let i=this.placed,a=n.depth,o=r.depth;for(;a&&o&&i.childCount==1;)i=i.firstChild.content,a--,o--;let s=new fq(i,a,o);return e>-1?new bJ(n.pos,e,this.$to.pos,this.$to.end(),s,t):s.size||n.pos!=this.$to.pos?new yJ(n.pos,r.pos,s):null}findFittable(){let e=this.unplaced.openStart;for(let t=this.unplaced.content,n=0,r=this.unplaced.openEnd;n<e;n++){let i=t.firstChild;if(t.childCount>1&&(r=0),i.type.spec.isolating&&r<=n){e=n;break}t=i.content}for(let t=1;t<=2;t++)for(let n=t==1?e:this.unplaced.openStart;n>=0;n--){let e,r=null;n?(r=LJ(this.unplaced.content,n-1).firstChild,e=r.content):e=this.unplaced.content;let i=e.firstChild;for(let e=this.depth;e>=0;e--){let{type:a,match:o}=this.frontier[e],s,c=null;if(t==1&&(i?o.matchType(i.type)||(c=o.fillBefore(oq.from(i),!1)):r&&a.compatibleContent(r.type)))return{sliceDepth:n,frontierDepth:e,parent:r,inject:c};if(t==2&&i&&(s=o.findWrapping(i.type)))return{sliceDepth:n,frontierDepth:e,parent:r,wrap:s};if(r&&o.matchType(r.type))break}}}openMore(){let{content:e,openStart:t,openEnd:n}=this.unplaced;return BJ(e,-1)<=t?!1:(this.unplaced.size>1&&BJ(e,1)>n&&n++,this.unplaced=new fq(e,t+1,n),!0)}dropNode(){let{content:e,openStart:t,openEnd:n}=this.unplaced,r=LJ(e,t);if(r.childCount<=1&&t>0){let i=e.size-t<=t+r.size;this.unplaced=new fq(FJ(e,t-1,1),t-1,i?t-1:n)}else this.unplaced=new fq(FJ(e,t,1),t,n)}placeNodes({sliceDepth:e,frontierDepth:t,parent:n,inject:r,wrap:i}){for(;this.depth>t;)this.closeFrontierNode();if(i)for(let e=0;e<i.length;e++)this.openFrontierNode(i[e]);let a=this.unplaced,o=n?n.content:a.content,s=a.openStart-e,c=0,l=[],{match:u,type:d}=this.frontier[t];if(r){for(let e=0;e<r.childCount;e++)l.push(r.child(e));u=u.matchFragment(r)}let f=o.size+e-(a.content.size-a.openEnd);for(;c<o.childCount;){let e=o.child(c),t=u.matchType(e.type);if(!t)break;c++,(c>1||s==0||e.content.size)&&(u=t,l.push(RJ(e.mark(d.allowedMarks(e.marks)),c==1?s:0,c==o.childCount?f:-1)))}let p=c==o.childCount;p||(f=-1),this.placed=IJ(this.placed,t,oq.from(l)),this.frontier[t].match=u,p&&f<0&&n&&n.type==this.frontier[this.depth].type&&this.frontier.length>1&&this.closeFrontierNode();for(let e=0,t=o;e<f;e++){let e=t.lastChild;this.frontier.push({type:e.type,match:e.contentMatchAt(e.childCount)}),t=e.content}this.unplaced=p?e==0?fq.empty:new fq(FJ(a.content,e-1,1),e-1,f<0?a.openEnd:e-1):new fq(FJ(a.content,e,c),a.openStart,a.openEnd)}mustMoveInline(){if(!this.$to.parent.isTextblock)return-1;let e=this.frontier[this.depth],t;if(!e.type.isTextblock||!zJ(this.$to,this.$to.depth,e.type,e.match,!1)||this.$to.depth==this.depth&&(t=this.findCloseLevel(this.$to))&&t.depth==this.depth)return-1;let{depth:n}=this.$to,r=this.$to.after(n);for(;n>1&&r==this.$to.end(--n);)++r;return r}findCloseLevel(e){scan:for(let t=Math.min(this.depth,e.depth);t>=0;t--){let{match:n,type:r}=this.frontier[t],i=t<e.depth&&e.end(t+1)==e.pos+(e.depth-(t+1)),a=zJ(e,t,r,n,i);if(a){for(let n=t-1;n>=0;n--){let{match:t,type:r}=this.frontier[n],i=zJ(e,n,r,t,!0);if(!i||i.childCount)continue scan}return{depth:t,fit:a,move:i?e.doc.resolve(e.after(t+1)):e}}}}close(e){let t=this.findCloseLevel(e);if(!t)return null;for(;this.depth>t.depth;)this.closeFrontierNode();t.fit.childCount&&(this.placed=IJ(this.placed,t.depth,t.fit)),e=t.move;for(let n=t.depth+1;n<=e.depth;n++){let t=e.node(n),r=t.type.contentMatch.fillBefore(t.content,!0,e.index(n));this.openFrontierNode(t.type,t.attrs,r)}return e}openFrontierNode(e,t=null,n){let r=this.frontier[this.depth];r.match=r.match.matchType(e),this.placed=IJ(this.placed,this.depth,oq.from(e.create(t,n))),this.frontier.push({type:e,match:e.contentMatch})}closeFrontierNode(){let e=this.frontier.pop().match.fillBefore(oq.empty,!0);e.childCount&&(this.placed=IJ(this.placed,this.frontier.length,e))}};function FJ(e,t,n){return t==0?e.cutByIndex(n,e.childCount):e.replaceChild(0,e.firstChild.copy(FJ(e.firstChild.content,t-1,n)))}function IJ(e,t,n){return t==0?e.append(n):e.replaceChild(e.childCount-1,e.lastChild.copy(IJ(e.lastChild.content,t-1,n)))}function LJ(e,t){for(let n=0;n<t;n++)e=e.firstChild.content;return e}function RJ(e,t,n){if(t<=0)return e;let r=e.content;return t>1&&(r=r.replaceChild(0,RJ(r.firstChild,t-1,r.childCount==1?n-1:0))),t>0&&(r=e.type.contentMatch.fillBefore(r).append(r),n<=0&&(r=r.append(e.type.contentMatch.matchFragment(r).fillBefore(oq.empty,!0)))),e.copy(r)}function zJ(e,t,n,r,i){let a=e.node(t),o=i?e.indexAfter(t):e.index(t);if(o==a.childCount&&!n.compatibleContent(a.type))return null;let s=r.fillBefore(a.content,!0,o);return s&&!Qje(n,a.content,o)?s:null}function Qje(e,t,n){for(let r=n;r<t.childCount;r++)if(!e.allowsMarks(t.child(r).marks))return!0;return!1}function $je(e){return e.spec.defining||e.spec.definingForContent}function BJ(e,t){for(let n=0;;n++){let r=t<0?e.firstChild:e.lastChild;if(!r||r.isAtom)return n;e=r.content}}function eMe(e,t,n,r){if(!r.size)return e.deleteRange(t,n);let i=e.doc.resolve(t),a=e.doc.resolve(n);if(PJ(i,a,r))return e.step(new yJ(t,n,r));let o=HJ(i,a);o[o.length-1]==0&&o.pop();let s=-(i.depth+1);o.unshift(s);for(let e=i.depth,t=i.pos-1;e>0;e--,t--){let n=i.node(e).type.spec;if(n.defining||n.definingAsContext||n.isolating)break;o.indexOf(e)>-1?s=e:i.before(e)==t&&o.splice(1,0,-e)}let c=o.indexOf(s),l=[],u=r.openStart;for(let e=r.content,t=0;;t++){let n=e.firstChild;if(l.push(n),t==r.openStart)break;e=n.content}for(let e=u-1;e>=0;e--){let t=l[e],n=$je(t.type);if(n&&!t.sameMarkup(i.node(Math.abs(s)-1)))u=e;else if(n||!t.type.isTextblock)break}for(let t=r.openStart;t>=0;t--){let s=(t+u+1)%(r.openStart+1),d=l[s];if(d)for(let t=0;t<o.length;t++){let l=o[(t+c)%o.length],u=!0;l<0&&(u=!1,l=-l);let f=i.node(l-1),p=i.index(l-1);if(f.canReplaceWith(p,p,d.type,d.marks))return e.replace(i.before(l),u?a.after(l):n,new fq(VJ(r.content,0,r.openStart,s),s,r.openEnd))}}let d=e.steps.length;for(let s=o.length-1;s>=0&&(e.replace(t,n,r),!(e.steps.length>d));s--){let e=o[s];e<0||(t=i.before(e),n=a.after(e))}}function VJ(e,t,n,r,i){if(t<n){let i=e.firstChild;e=e.replaceChild(0,i.copy(VJ(i.content,t+1,n,r,i)))}if(t>r){let t=i.contentMatchAt(0),n=t.fillBefore(e).append(e);e=n.append(t.matchFragment(n).fillBefore(oq.empty,!0))}return e}function tMe(e,t,n,r){if(!r.isInline&&t==n&&e.doc.resolve(t).parent.content.size){let i=Xje(e.doc,t,r.type);i!=null&&(t=n=i)}e.replaceRange(t,n,new fq(oq.from(r),0,0))}function nMe(e,t,n){let r=e.doc.resolve(t),i=e.doc.resolve(n);if(r.parent.isTextblock&&i.parent.isTextblock&&r.start()!=i.start()&&r.parentOffset==0&&i.parentOffset==0){let a=r.sharedDepth(n),o=!1;for(let e=r.depth;e>a;e--)r.node(e).type.spec.isolating&&(o=!0);for(let e=i.depth;e>a;e--)i.node(e).type.spec.isolating&&(o=!0);if(!o){for(let e=r.depth;e>0&&t==r.start(e);e--)t=r.before(e);for(let e=i.depth;e>0&&n==i.start(e);e--)n=i.before(e);r=e.doc.resolve(t),i=e.doc.resolve(n)}}let a=HJ(r,i);for(let t=0;t<a.length;t++){let n=a[t],o=t==a.length-1;if(o&&n==0||r.node(n).type.contentMatch.validEnd)return e.delete(r.start(n),i.end(n));if(n>0&&(o||r.node(n-1).canReplace(r.index(n-1),i.indexAfter(n-1))))return e.delete(r.before(n),i.after(n))}for(let a=1;a<=r.depth&&a<=i.depth;a++)if(t-r.start(a)==r.depth-a&&n>r.end(a)&&i.end(a)-n!=i.depth-a&&r.start(a-1)==i.start(a-1)&&r.node(a-1).canReplace(r.index(a-1),i.index(a-1)))return e.delete(r.before(a),n);e.delete(t,n)}function HJ(e,t){let n=[],r=Math.min(e.depth,t.depth);for(let i=r;i>=0;i--){let r=e.start(i);if(r<e.pos-(e.depth-i)||t.end(i)>t.pos+(t.depth-i)||e.node(i).type.spec.isolating||t.node(i).type.spec.isolating)break;(r==t.start(i)||i==e.depth&&i==t.depth&&e.parent.inlineContent&&t.parent.inlineContent&&i&&t.start(i-1)==r-1)&&n.push(i)}return n}var UJ=class e extends fJ{constructor(e,t,n){super(),this.pos=e,this.attr=t,this.value=n}apply(e){let t=e.nodeAt(this.pos);if(!t)return pJ.fail(`No node at attribute step's position`);let n=Object.create(null);for(let e in t.attrs)n[e]=t.attrs[e];n[this.attr]=this.value;let r=t.type.create(n,null,t.marks);return pJ.fromReplace(e,this.pos,this.pos+1,new fq(oq.from(r),0,+!t.isLeaf))}getMap(){return lJ.empty}invert(t){return new e(this.pos,this.attr,t.nodeAt(this.pos).attrs[this.attr])}map(t){let n=t.mapResult(this.pos,1);return n.deletedAfter?null:new e(n.pos,this.attr,this.value)}toJSON(){return{stepType:`attr`,pos:this.pos,attr:this.attr,value:this.value}}static fromJSON(t,n){if(typeof n.pos!=`number`||typeof n.attr!=`string`)throw RangeError(`Invalid input for AttrStep.fromJSON`);return new e(n.pos,n.attr,n.value)}};fJ.jsonID(`attr`,UJ);var WJ=class e extends fJ{constructor(e,t){super(),this.attr=e,this.value=t}apply(e){let t=Object.create(null);for(let n in e.attrs)t[n]=e.attrs[n];t[this.attr]=this.value;let n=e.type.create(t,e.content,e.marks);return pJ.ok(n)}getMap(){return lJ.empty}invert(t){return new e(this.attr,t.attrs[this.attr])}map(e){return this}toJSON(){return{stepType:`docAttr`,attr:this.attr,value:this.value}}static fromJSON(t,n){if(typeof n.attr!=`string`)throw RangeError(`Invalid input for DocAttrStep.fromJSON`);return new e(n.attr,n.value)}};fJ.jsonID(`docAttr`,WJ);var GJ=class extends Error{};GJ=function e(t){let n=Error.call(this,t);return n.__proto__=e.prototype,n},GJ.prototype=Object.create(Error.prototype),GJ.prototype.constructor=GJ,GJ.prototype.name=`TransformError`;var KJ=class{constructor(e){this.doc=e,this.steps=[],this.docs=[],this.mapping=new uJ}get before(){return this.docs.length?this.docs[0]:this.doc}step(e){let t=this.maybeStep(e);if(t.failed)throw new GJ(t.failed);return this}maybeStep(e){let t=e.apply(this.doc);return t.failed||this.addStep(e,t.doc),t}get docChanged(){return this.steps.length>0}changedRange(){let e=1e9,t=-1e9;for(let n=0;n<this.mapping.maps.length;n++){let r=this.mapping.maps[n];n&&(e=r.map(e,1),t=r.map(t,-1)),r.forEach((n,r,i,a)=>{e=Math.min(e,i),t=Math.max(t,a)})}return e==1e9?null:{from:e,to:t}}addStep(e,t){this.docs.push(this.doc),this.steps.push(e),this.mapping.appendMap(e.getMap()),this.doc=t}replace(e,t=e,n=fq.empty){let r=NJ(this.doc,e,t,n);return r&&this.step(r),this}replaceWith(e,t,n){return this.replace(e,t,new fq(oq.from(n),0,0))}delete(e,t){return this.replace(e,t,fq.empty)}insert(e,t){return this.replaceWith(e,e,t)}replaceRange(e,t,n){return eMe(this,e,t,n),this}replaceRangeWith(e,t,n){return tMe(this,e,t,n),this}deleteRange(e,t){return nMe(this,e,t),this}lift(e,t){return Bje(this,e,t),this}join(e,t=1){return Yje(this,e,t),this}wrap(e,t){return Uje(this,e,t),this}setBlockType(e,t=e,n,r=null){return Wje(this,e,t,n,r),this}setNodeMarkup(e,t,n=null,r){return Kje(this,e,t,n,r),this}setNodeAttribute(e,t,n){return this.step(new UJ(e,t,n)),this}setDocAttribute(e,t){return this.step(new WJ(e,t)),this}addNodeMark(e,t){return this.step(new _J(e,t)),this}removeNodeMark(e,t){let n=this.doc.nodeAt(e);if(!n)throw RangeError(`No node at position `+e);if(t instanceof uq)t.isInSet(n.marks)&&this.step(new vJ(e,t));else{let r=n.marks,i,a=[];for(;i=t.isInSet(r);)a.push(new vJ(e,i)),r=i.removeFromSet(r);for(let e=a.length-1;e>=0;e--)this.step(a[e])}return this}split(e,t=1,n){return qje(this,e,t,n),this}addMark(e,t,n){return Lje(this,e,t,n),this}removeMark(e,t,n){return Rje(this,e,t,n),this}clearIncompatible(e,t,n){return SJ(this,e,t,n),this}},qJ=Object.create(null),JJ=class{constructor(e,t,n){this.$anchor=e,this.$head=t,this.ranges=n||[new rMe(e.min(t),e.max(t))]}get anchor(){return this.$anchor.pos}get head(){return this.$head.pos}get from(){return this.$from.pos}get to(){return this.$to.pos}get $from(){return this.ranges[0].$from}get $to(){return this.ranges[0].$to}get empty(){let e=this.ranges;for(let t=0;t<e.length;t++)if(e[t].$from.pos!=e[t].$to.pos)return!1;return!0}content(){return this.$from.doc.slice(this.from,this.to,!0)}replace(e,t=fq.empty){let n=t.content.lastChild,r=null;for(let e=0;e<t.openEnd;e++)r=n,n=n.lastChild;let i=e.steps.length,a=this.ranges;for(let o=0;o<a.length;o++){let{$from:s,$to:c}=a[o],l=e.mapping.slice(i);e.replaceRange(l.map(s.pos),l.map(c.pos),o?fq.empty:t),o==0&&nY(e,i,(n?n.isInline:r&&r.isTextblock)?-1:1)}}replaceWith(e,t){let n=e.steps.length,r=this.ranges;for(let i=0;i<r.length;i++){let{$from:a,$to:o}=r[i],s=e.mapping.slice(n),c=s.map(a.pos),l=s.map(o.pos);i?e.deleteRange(c,l):(e.replaceRangeWith(c,l,t),nY(e,n,t.isInline?-1:1))}}static findFrom(e,t,n=!1){let r=e.parent.inlineContent?new ZJ(e):tY(e.node(0),e.parent,e.pos,e.index(),t,n);if(r)return r;for(let r=e.depth-1;r>=0;r--){let i=t<0?tY(e.node(0),e.node(r),e.before(r+1),e.index(r),t,n):tY(e.node(0),e.node(r),e.after(r+1),e.index(r)+1,t,n);if(i)return i}return null}static near(e,t=1){return this.findFrom(e,t)||this.findFrom(e,-t)||new eY(e.node(0))}static atStart(e){return tY(e,e,0,0,1)||new eY(e)}static atEnd(e){return tY(e,e,e.content.size,e.childCount,-1)||new eY(e)}static fromJSON(e,t){if(!t||!t.type)throw RangeError(`Invalid input for Selection.fromJSON`);let n=qJ[t.type];if(!n)throw RangeError(`No selection type ${t.type} defined`);return n.fromJSON(e,t)}static jsonID(e,t){if(e in qJ)throw RangeError(`Duplicate use of selection JSON ID `+e);return qJ[e]=t,t.prototype.jsonID=e,t}getBookmark(){return ZJ.between(this.$anchor,this.$head).getBookmark()}};JJ.prototype.visible=!0;var rMe=class{constructor(e,t){this.$from=e,this.$to=t}},YJ=!1;function XJ(e){!YJ&&!e.parent.inlineContent&&(YJ=!0,console.warn(`TextSelection endpoint not pointing into a node with inline content (`+e.parent.type.name+`)`))}var ZJ=class e extends JJ{constructor(e,t=e){XJ(e),XJ(t),super(e,t)}get $cursor(){return this.$anchor.pos==this.$head.pos?this.$head:null}map(t,n){let r=t.resolve(n.map(this.head));if(!r.parent.inlineContent)return JJ.near(r);let i=t.resolve(n.map(this.anchor));return new e(i.parent.inlineContent?i:r,r)}replace(e,t=fq.empty){if(super.replace(e,t),t==fq.empty){let t=this.$from.marksAcross(this.$to);t&&e.ensureMarks(t)}}eq(t){return t instanceof e&&t.anchor==this.anchor&&t.head==this.head}getBookmark(){return new QJ(this.anchor,this.head)}toJSON(){return{type:`text`,anchor:this.anchor,head:this.head}}static fromJSON(t,n){if(typeof n.anchor!=`number`||typeof n.head!=`number`)throw RangeError(`Invalid input for TextSelection.fromJSON`);return new e(t.resolve(n.anchor),t.resolve(n.head))}static create(e,t,n=t){let r=e.resolve(t);return new this(r,n==t?r:e.resolve(n))}static between(t,n,r){let i=t.pos-n.pos;if((!r||i)&&(r=i>=0?1:-1),!n.parent.inlineContent){let e=JJ.findFrom(n,r,!0)||JJ.findFrom(n,-r,!0);if(e)n=e.$head;else return JJ.near(n,r)}return t.parent.inlineContent||(i==0?t=n:(t=(JJ.findFrom(t,-r,!0)||JJ.findFrom(t,r,!0)).$anchor,t.pos<n.pos!=i<0&&(t=n))),new e(t,n)}};JJ.jsonID(`text`,ZJ);var QJ=class e{constructor(e,t){this.anchor=e,this.head=t}map(t){return new e(t.map(this.anchor),t.map(this.head))}resolve(e){return ZJ.between(e.resolve(this.anchor),e.resolve(this.head))}},$J=class e extends JJ{constructor(e){let t=e.nodeAfter,n=e.node(0).resolve(e.pos+t.nodeSize);super(e,n),this.node=t}map(t,n){let{deleted:r,pos:i}=n.mapResult(this.anchor),a=t.resolve(i);return r?JJ.near(a):new e(a)}content(){return new fq(oq.from(this.node),0,0)}eq(t){return t instanceof e&&t.anchor==this.anchor}toJSON(){return{type:`node`,anchor:this.anchor}}getBookmark(){return new iMe(this.anchor)}static fromJSON(t,n){if(typeof n.anchor!=`number`)throw RangeError(`Invalid input for NodeSelection.fromJSON`);return new e(t.resolve(n.anchor))}static create(t,n){return new e(t.resolve(n))}static isSelectable(e){return!e.isText&&e.type.spec.selectable!==!1}};$J.prototype.visible=!1,JJ.jsonID(`node`,$J);var iMe=class e{constructor(e){this.anchor=e}map(t){let{deleted:n,pos:r}=t.mapResult(this.anchor);return n?new QJ(r,r):new e(r)}resolve(e){let t=e.resolve(this.anchor),n=t.nodeAfter;return n&&$J.isSelectable(n)?new $J(t):JJ.near(t)}},eY=class e extends JJ{constructor(e){super(e.resolve(0),e.resolve(e.content.size))}replace(e,t=fq.empty){if(t==fq.empty){e.delete(0,e.doc.content.size);let t=JJ.atStart(e.doc);t.eq(e.selection)||e.setSelection(t)}else super.replace(e,t)}toJSON(){return{type:`all`}}static fromJSON(t){return new e(t)}map(t){return new e(t)}eq(t){return t instanceof e}getBookmark(){return aMe}};JJ.jsonID(`all`,eY);var aMe={map(){return this},resolve(e){return new eY(e)}};function tY(e,t,n,r,i,a=!1){if(t.inlineContent)return ZJ.create(e,n);for(let o=r-(i>0?0:1);i>0?o<t.childCount:o>=0;o+=i){let r=t.child(o);if(!r.isAtom){let t=tY(e,r,n+i,i<0?r.childCount:0,i,a);if(t)return t}else if(!a&&$J.isSelectable(r))return $J.create(e,n-(i<0?r.nodeSize:0));n+=r.nodeSize*i}return null}function nY(e,t,n){let r=e.steps.length-1;if(r<t)return;let i=e.steps[r];if(!(i instanceof yJ||i instanceof bJ))return;let a=e.mapping.maps[r],o;a.forEach((e,t,n,r)=>{o??=r}),e.setSelection(JJ.near(e.doc.resolve(o),n))}var rY=1,iY=2,aY=4,oMe=class extends KJ{constructor(e){super(e.doc),this.curSelectionFor=0,this.updated=0,this.meta=Object.create(null),this.time=Date.now(),this.curSelection=e.selection,this.storedMarks=e.storedMarks}get selection(){return this.curSelectionFor<this.steps.length&&(this.curSelection=this.curSelection.map(this.doc,this.mapping.slice(this.curSelectionFor)),this.curSelectionFor=this.steps.length),this.curSelection}setSelection(e){if(e.$from.doc!=this.doc)throw RangeError(`Selection passed to setSelection must point at the current document`);return this.curSelection=e,this.curSelectionFor=this.steps.length,this.updated=(this.updated|rY)&-3,this.storedMarks=null,this}get selectionSet(){return(this.updated&rY)>0}setStoredMarks(e){return this.storedMarks=e,this.updated|=iY,this}ensureMarks(e){return uq.sameSet(this.storedMarks||this.selection.$from.marks(),e)||this.setStoredMarks(e),this}addStoredMark(e){return this.ensureMarks(e.addToSet(this.storedMarks||this.selection.$head.marks()))}removeStoredMark(e){return this.ensureMarks(e.removeFromSet(this.storedMarks||this.selection.$head.marks()))}get storedMarksSet(){return(this.updated&iY)>0}addStep(e,t){super.addStep(e,t),this.updated&=-3,this.storedMarks=null}setTime(e){return this.time=e,this}replaceSelection(e){return this.selection.replace(this,e),this}replaceSelectionWith(e,t=!0){let n=this.selection;return t&&(e=e.mark(this.storedMarks||(n.empty?n.$from.marks():n.$from.marksAcross(n.$to)||uq.none))),n.replaceWith(this,e),this}deleteSelection(){return this.selection.replace(this),this}insertText(e,t,n){let r=this.doc.type.schema;if(t==null)return e?this.replaceSelectionWith(r.text(e),!0):this.deleteSelection();{if(n??=t,!e)return this.deleteRange(t,n);let i=this.storedMarks;if(!i){let e=this.doc.resolve(t);i=n==t?e.marks():e.marksAcross(this.doc.resolve(n))}return this.replaceRangeWith(t,n,r.text(e,i)),!this.selection.empty&&this.selection.to==t+e.length&&this.setSelection(JJ.near(this.selection.$to)),this}}setMeta(e,t){return this.meta[typeof e==`string`?e:e.key]=t,this}getMeta(e){return this.meta[typeof e==`string`?e:e.key]}get isGeneric(){for(let e in this.meta)return!1;return!0}scrollIntoView(){return this.updated|=aY,this}get scrolledIntoView(){return(this.updated&aY)>0}};function oY(e,t){return!t||!e?e:e.bind(t)}var sY=class{constructor(e,t,n){this.name=e,this.init=oY(t.init,n),this.apply=oY(t.apply,n)}},sMe=[new sY(`doc`,{init(e){return e.doc||e.schema.topNodeType.createAndFill()},apply(e){return e.doc}}),new sY(`selection`,{init(e,t){return e.selection||JJ.atStart(t.doc)},apply(e){return e.selection}}),new sY(`storedMarks`,{init(e){return e.storedMarks||null},apply(e,t,n,r){return r.selection.$cursor?e.storedMarks:null}}),new sY(`scrollToSelection`,{init(){return 0},apply(e,t){return e.scrolledIntoView?t+1:t}})],cY=class{constructor(e,t){this.schema=e,this.plugins=[],this.pluginsByKey=Object.create(null),this.fields=sMe.slice(),t&&t.forEach(e=>{if(this.pluginsByKey[e.key])throw RangeError(`Adding different instances of a keyed plugin (`+e.key+`)`);this.plugins.push(e),this.pluginsByKey[e.key]=e,e.spec.state&&this.fields.push(new sY(e.key,e.spec.state,e))})}},lY=class e{constructor(e){this.config=e}get schema(){return this.config.schema}get plugins(){return this.config.plugins}apply(e){return this.applyTransaction(e).state}filterTransaction(e,t=-1){for(let n=0;n<this.config.plugins.length;n++)if(n!=t){let t=this.config.plugins[n];if(t.spec.filterTransaction&&!t.spec.filterTransaction.call(t,e,this))return!1}return!0}applyTransaction(e){if(!this.filterTransaction(e))return{state:this,transactions:[]};let t=[e],n=this.applyInner(e),r=null;for(;;){let i=!1;for(let a=0;a<this.config.plugins.length;a++){let o=this.config.plugins[a];if(o.spec.appendTransaction){let s=r?r[a].n:0,c=r?r[a].state:this,l=s<t.length&&o.spec.appendTransaction.call(o,s?t.slice(s):t,c,n);if(l&&n.filterTransaction(l,a)){if(l.setMeta(`appendedTransaction`,e),!r){r=[];for(let e=0;e<this.config.plugins.length;e++)r.push(e<a?{state:n,n:t.length}:{state:this,n:0})}t.push(l),n=n.applyInner(l),i=!0}r&&(r[a]={state:n,n:t.length})}}if(!i)return{state:n,transactions:t}}}applyInner(t){if(!t.before.eq(this.doc))throw RangeError(`Applying a mismatched transaction`);let n=new e(this.config),r=this.config.fields;for(let e=0;e<r.length;e++){let i=r[e];n[i.name]=i.apply(t,this[i.name],this,n)}return n}get tr(){return new oMe(this)}static create(t){let n=new cY(t.doc?t.doc.type.schema:t.schema,t.plugins),r=new e(n);for(let e=0;e<n.fields.length;e++)r[n.fields[e].name]=n.fields[e].init(t,r);return r}reconfigure(t){let n=new cY(this.schema,t.plugins),r=n.fields,i=new e(n);for(let e=0;e<r.length;e++){let n=r[e].name;i[n]=this.hasOwnProperty(n)?this[n]:r[e].init(t,i)}return i}toJSON(e){let t={doc:this.doc.toJSON(),selection:this.selection.toJSON()};if(this.storedMarks&&(t.storedMarks=this.storedMarks.map(e=>e.toJSON())),e&&typeof e==`object`)for(let n in e){if(n==`doc`||n==`selection`)throw RangeError("The JSON fields `doc` and `selection` are reserved");let r=e[n],i=r.spec.state;i&&i.toJSON&&(t[n]=i.toJSON.call(r,this[r.key]))}return t}static fromJSON(t,n,r){if(!n)throw RangeError(`Invalid input for EditorState.fromJSON`);if(!t.schema)throw RangeError(`Required config field 'schema' missing`);let i=new cY(t.schema,t.plugins),a=new e(i);return i.fields.forEach(e=>{if(e.name==`doc`)a.doc=Eq.fromJSON(t.schema,n.doc);else if(e.name==`selection`)a.selection=JJ.fromJSON(a.doc,n.selection);else if(e.name==`storedMarks`)n.storedMarks&&(a.storedMarks=n.storedMarks.map(t.schema.markFromJSON));else{if(r)for(let i in r){let o=r[i],s=o.spec.state;if(o.key==e.name&&s&&s.fromJSON&&Object.prototype.hasOwnProperty.call(n,i)){a[e.name]=s.fromJSON.call(o,t,n[i],a);return}}a[e.name]=e.init(t,a)}}),a}};function uY(e,t,n){for(let r in e){let i=e[r];i instanceof Function?i=i.bind(t):r==`handleDOMEvents`&&(i=uY(i,t,{})),n[r]=i}return n}var dY=class{constructor(e){this.spec=e,this.props={},e.props&&uY(e.props,this,this.props),this.key=e.key?e.key.key:pY(`plugin`)}getState(e){return e[this.key]}},fY=Object.create(null);function pY(e){return e in fY?e+`$`+ ++fY[e]:(fY[e]=0,e+`$`)}var mY=class{constructor(e=`key`){this.key=pY(e)}get(e){return e.config.pluginsByKey[this.key]}getState(e){return e[this.key]}},hY=(e,t)=>e.selection.empty?!1:(t&&t(e.tr.deleteSelection().scrollIntoView()),!0);function gY(e,t){let{$cursor:n}=e.selection;return!n||(t?!t.endOfTextblock(`backward`,e):n.parentOffset>0)?null:n}var _Y=(e,t,n)=>{let r=gY(e,n);if(!r)return!1;let i=xY(r);if(!i){let n=r.blockRange(),i=n&&CJ(n);return i==null?!1:(t&&t(e.tr.lift(n,i).scrollIntoView()),!0)}let a=i.nodeBefore;if(jY(e,i,t,-1))return!0;if(r.parent.content.size==0&&(yY(a,`end`)||$J.isSelectable(a)))for(let n=r.depth;;n--){let o=NJ(e.doc,r.before(n),r.after(n),fq.empty);if(o&&o.slice.size<o.to-o.from){if(t){let n=e.tr.step(o);n.setSelection(yY(a,`end`)?JJ.findFrom(n.doc.resolve(n.mapping.map(i.pos,-1)),-1):$J.create(n.doc,i.pos-a.nodeSize)),t(n.scrollIntoView())}return!0}if(n==1||r.node(n-1).childCount>1)break}return a.isAtom&&i.depth==r.depth-1?(t&&t(e.tr.delete(i.pos-a.nodeSize,i.pos).scrollIntoView()),!0):!1},cMe=(e,t,n)=>{let r=gY(e,n);if(!r)return!1;let i=xY(r);return i?vY(e,i,t):!1},lMe=(e,t,n)=>{let r=SY(e,n);if(!r)return!1;let i=TY(r);return i?vY(e,i,t):!1};function vY(e,t,n){let r=t.nodeBefore,i=t.pos-1;for(;!r.isTextblock;i--){if(r.type.spec.isolating)return!1;let e=r.lastChild;if(!e)return!1;r=e}let a=t.nodeAfter,o=t.pos+1;for(;!a.isTextblock;o++){if(a.type.spec.isolating)return!1;let e=a.firstChild;if(!e)return!1;a=e}let s=NJ(e.doc,i,o,fq.empty);if(!s||s.from!=i||s instanceof yJ&&s.slice.size>=o-i)return!1;if(n){let t=e.tr.step(s);t.setSelection(ZJ.create(t.doc,i)),n(t.scrollIntoView())}return!0}function yY(e,t,n=!1){for(let r=e;r;r=t==`start`?r.firstChild:r.lastChild){if(r.isTextblock)return!0;if(n&&r.childCount!=1)return!1}return!1}var bY=(e,t,n)=>{let{$head:r,empty:i}=e.selection,a=r;if(!i)return!1;if(r.parent.isTextblock){if(n?!n.endOfTextblock(`backward`,e):r.parentOffset>0)return!1;a=xY(r)}let o=a&&a.nodeBefore;return!o||!$J.isSelectable(o)?!1:(t&&t(e.tr.setSelection($J.create(e.doc,a.pos-o.nodeSize)).scrollIntoView()),!0)};function xY(e){if(!e.parent.type.spec.isolating)for(let t=e.depth-1;t>=0;t--){if(e.index(t)>0)return e.doc.resolve(e.before(t+1));if(e.node(t).type.spec.isolating)break}return null}function SY(e,t){let{$cursor:n}=e.selection;return!n||(t?!t.endOfTextblock(`forward`,e):n.parentOffset<n.parent.content.size)?null:n}var CY=(e,t,n)=>{let r=SY(e,n);if(!r)return!1;let i=TY(r);if(!i)return!1;let a=i.nodeAfter;if(jY(e,i,t,1))return!0;if(r.parent.content.size==0&&(yY(a,`start`)||$J.isSelectable(a))){let n=NJ(e.doc,r.before(),r.after(),fq.empty);if(n&&n.slice.size<n.to-n.from){if(t){let r=e.tr.step(n);r.setSelection(yY(a,`start`)?JJ.findFrom(r.doc.resolve(r.mapping.map(i.pos)),1):$J.create(r.doc,r.mapping.map(i.pos))),t(r.scrollIntoView())}return!0}}return a.isAtom&&i.depth==r.depth-1?(t&&t(e.tr.delete(i.pos,i.pos+a.nodeSize).scrollIntoView()),!0):!1},wY=(e,t,n)=>{let{$head:r,empty:i}=e.selection,a=r;if(!i)return!1;if(r.parent.isTextblock){if(n?!n.endOfTextblock(`forward`,e):r.parentOffset<r.parent.content.size)return!1;a=TY(r)}let o=a&&a.nodeAfter;return!o||!$J.isSelectable(o)?!1:(t&&t(e.tr.setSelection($J.create(e.doc,a.pos)).scrollIntoView()),!0)};function TY(e){if(!e.parent.type.spec.isolating)for(let t=e.depth-1;t>=0;t--){let n=e.node(t);if(e.index(t)+1<n.childCount)return e.doc.resolve(e.after(t+1));if(n.type.spec.isolating)break}return null}var uMe=(e,t)=>{let n=e.selection,r=n instanceof $J,i;if(r){if(n.node.isTextblock||!kJ(e.doc,n.from))return!1;i=n.from}else if(i=jJ(e.doc,n.from,-1),i==null)return!1;if(t){let n=e.tr.join(i);r&&n.setSelection($J.create(n.doc,i-e.doc.resolve(i).nodeBefore.nodeSize)),t(n.scrollIntoView())}return!0},dMe=(e,t)=>{let n=e.selection,r;if(n instanceof $J){if(n.node.isTextblock||!kJ(e.doc,n.to))return!1;r=n.to}else if(r=jJ(e.doc,n.to,1),r==null)return!1;return t&&t(e.tr.join(r).scrollIntoView()),!0},fMe=(e,t)=>{let{$from:n,$to:r}=e.selection,i=n.blockRange(r),a=i&&CJ(i);return a==null?!1:(t&&t(e.tr.lift(i,a).scrollIntoView()),!0)},EY=(e,t)=>{let{$head:n,$anchor:r}=e.selection;return!n.parent.type.spec.code||!n.sameParent(r)?!1:(t&&t(e.tr.insertText(`
-`).scrollIntoView()),!0)};function DY(e){for(let t=0;t<e.edgeCount;t++){let{type:n}=e.edge(t);if(n.isTextblock&&!n.hasRequiredAttrs())return n}return null}var OY=(e,t)=>{let{$head:n,$anchor:r}=e.selection;if(!n.parent.type.spec.code||!n.sameParent(r))return!1;let i=n.node(-1),a=n.indexAfter(-1),o=DY(i.contentMatchAt(a));if(!o||!i.canReplaceWith(a,a,o))return!1;if(t){let r=n.after(),i=e.tr.replaceWith(r,r,o.createAndFill());i.setSelection(JJ.near(i.doc.resolve(r),1)),t(i.scrollIntoView())}return!0},kY=(e,t)=>{let n=e.selection,{$from:r,$to:i}=n;if(n instanceof eY||r.parent.inlineContent||i.parent.inlineContent)return!1;let a=DY(i.parent.contentMatchAt(i.indexAfter()));if(!a||!a.isTextblock)return!1;if(t){let n=(!r.parentOffset&&i.index()<i.parent.childCount?r:i).pos,o=e.tr.insert(n,a.createAndFill());o.setSelection(ZJ.create(o.doc,n+1)),t(o.scrollIntoView())}return!0},AY=(e,t)=>{let{$cursor:n}=e.selection;if(!n||n.parent.content.size)return!1;if(n.depth>1&&n.after()!=n.end(-1)){let r=n.before();if(OJ(e.doc,r))return t&&t(e.tr.split(r).scrollIntoView()),!0}let r=n.blockRange(),i=r&&CJ(r);return i==null?!1:(t&&t(e.tr.lift(r,i).scrollIntoView()),!0)};function pMe(e){return(t,n)=>{if(t.selection instanceof $J&&t.selection.node.isBlock){let{$from:e}=t.selection;return!e.parentOffset||!OJ(t.doc,e.pos)?!1:(n&&n(t.tr.split(e.pos).scrollIntoView()),!0)}if(!t.selection.$from.depth)return!1;let r=t.tr;!t.selection.empty&&(t.selection instanceof ZJ||t.selection instanceof eY)&&r.deleteSelection();let{$from:i}=r.selection,a=r.steps.length,o=[],s,c,l=!1,u=!1;for(let t=i.depth;;t--)if(i.node(t).isBlock){l=i.end(t)==i.pos+(i.depth-t),u=i.start(t)==i.pos-(i.depth-t),c=DY(i.node(t-1).contentMatchAt(i.indexAfter(t-1)));let n=e&&e(i.parent,l,i);o.unshift(n||(l&&c?{type:c}:null)),s=t;break}else{if(t==1)return!1;o.unshift(null)}let d=i.pos,f=OJ(r.doc,d,o.length,o);if(f||=(o[0]=c?{type:c}:null,OJ(r.doc,d,o.length,o)),!f)return!1;if(r.split(d,o.length,o),!l&&u&&i.node(s).type!=c){let e=r.mapping.slice(a),t=e.map(i.before(s)),n=r.doc.resolve(t);c&&i.node(s-1).canReplaceWith(n.index(),n.index()+1,c)&&r.setNodeMarkup(e.map(i.before(s)),c)}return n&&n(r.scrollIntoView()),!0}}var mMe=pMe(),hMe=(e,t)=>{let{$from:n,to:r}=e.selection,i,a=n.sharedDepth(r);return a==0?!1:(i=n.before(a),t&&t(e.tr.setSelection($J.create(e.doc,i))),!0)},gMe=(e,t)=>(t&&t(e.tr.setSelection(new eY(e.doc))),!0);function _Me(e,t,n){let r=t.nodeBefore,i=t.nodeAfter,a=t.index();return!r||!i||!r.type.compatibleContent(i.type)?!1:!r.content.size&&t.parent.canReplace(a-1,a)?(n&&n(e.tr.delete(t.pos-r.nodeSize,t.pos).scrollIntoView()),!0):!t.parent.canReplace(a,a+1)||!(i.isTextblock||kJ(e.doc,t.pos))?!1:(n&&n(e.tr.join(t.pos).scrollIntoView()),!0)}function jY(e,t,n,r){let i=t.nodeBefore,a=t.nodeAfter,o,s,c=i.type.spec.isolating||a.type.spec.isolating;if(!c&&_Me(e,t,n))return!0;let l=!c&&t.parent.canReplace(t.index(),t.index()+1);if(l&&(o=(s=i.contentMatchAt(i.childCount)).findWrapping(a.type))&&s.matchType(o[0]||a.type).validEnd){if(n){let r=t.pos+a.nodeSize,s=oq.empty;for(let e=o.length-1;e>=0;e--)s=oq.from(o[e].create(null,s));s=oq.from(i.copy(s));let c=e.tr.step(new bJ(t.pos-1,r,t.pos,r,new fq(s,1,0),o.length,!0)),l=c.doc.resolve(r+2*o.length);l.nodeAfter&&l.nodeAfter.type==i.type&&kJ(c.doc,l.pos)&&c.join(l.pos),n(c.scrollIntoView())}return!0}let u=a.type.spec.isolating||r>0&&c?null:JJ.findFrom(t,1),d=u&&u.$from.blockRange(u.$to),f=d&&CJ(d);if(f!=null&&f>=t.depth)return n&&n(e.tr.lift(d,f).scrollIntoView()),!0;if(l&&yY(a,`start`,!0)&&yY(i,`end`)){let r=i,o=[];for(;o.push(r),!r.isTextblock;)r=r.lastChild;let s=a,c=1;for(;!s.isTextblock;s=s.firstChild)c++;if(r.canReplace(r.childCount,r.childCount,s.content)){if(n){let r=oq.empty;for(let e=o.length-1;e>=0;e--)r=oq.from(o[e].copy(r));n(e.tr.step(new bJ(t.pos-o.length,t.pos+a.nodeSize,t.pos+c,t.pos+a.nodeSize-c,new fq(r,o.length,0),0,!0)).scrollIntoView())}return!0}}return!1}function MY(e){return function(t,n){let r=t.selection,i=e<0?r.$from:r.$to,a=i.depth;for(;i.node(a).isInline;){if(!a)return!1;a--}return i.node(a).isTextblock?(n&&n(t.tr.setSelection(ZJ.create(t.doc,e<0?i.start(a):i.end(a)))),!0):!1}}var NY=MY(-1),PY=MY(1);function vMe(e,t=null){return function(n,r){let{$from:i,$to:a}=n.selection,o=i.blockRange(a),s=o&&wJ(o,e,t);return s?(r&&r(n.tr.wrap(o,s).scrollIntoView()),!0):!1}}function FY(e,t=null){return function(n,r){let i=!1;for(let r=0;r<n.selection.ranges.length&&!i;r++){let{$from:{pos:a},$to:{pos:o}}=n.selection.ranges[r];n.doc.nodesBetween(a,o,(r,a)=>{if(i)return!1;if(!(!r.isTextblock||r.hasMarkup(e,t)))if(r.type==e)i=!0;else{let t=n.doc.resolve(a),r=t.index();i=t.parent.canReplaceWith(r,r+1,e)}})}if(!i)return!1;if(r){let i=n.tr;for(let r=0;r<n.selection.ranges.length;r++){let{$from:{pos:a},$to:{pos:o}}=n.selection.ranges[r];i.setBlockType(a,o,e,t)}r(i.scrollIntoView())}return!0}}function IY(...e){return function(t,n,r){for(let i=0;i<e.length;i++)if(e[i](t,n,r))return!0;return!1}}var LY=IY(hY,_Y,bY),RY=IY(hY,CY,wY),zY={Enter:IY(EY,kY,AY,mMe),"Mod-Enter":OY,Backspace:LY,"Mod-Backspace":LY,"Shift-Backspace":LY,Delete:RY,"Mod-Delete":RY,"Mod-a":gMe},yMe={"Ctrl-h":zY.Backspace,"Alt-Backspace":zY[`Mod-Backspace`],"Ctrl-d":zY.Delete,"Ctrl-Alt-Backspace":zY[`Mod-Delete`],"Alt-Delete":zY[`Mod-Delete`],"Alt-d":zY[`Mod-Delete`],"Ctrl-a":NY,"Ctrl-e":PY};for(let e in zY)yMe[e]=zY[e];typeof navigator<`u`?/Mac|iP(hone|[oa]d)/.test(navigator.platform):typeof os<`u`&&os.platform&&os.platform();function bMe(e,t=null){return function(n,r){let{$from:i,$to:a}=n.selection,o=i.blockRange(a);if(!o)return!1;let s=r?n.tr:null;return xMe(s,o,e,t)?(r&&r(s.scrollIntoView()),!0):!1}}function xMe(e,t,n,r=null){let i=!1,a=t,o=t.$from.doc;if(t.depth>=2&&t.$from.node(t.depth-1).type.compatibleContent(n)&&t.startIndex==0){if(t.$from.index(t.depth-1)==0)return!1;let e=o.resolve(t.start-2);a=new Tq(e,e,t.depth),t.endIndex<t.parent.childCount&&(t=new Tq(t.$from,o.resolve(t.$to.end(t.depth)),t.depth)),i=!0}let s=wJ(a,n,r,t);return s?(e&&SMe(e,t,s,i,n),!0):!1}function SMe(e,t,n,r,i){let a=oq.empty;for(let e=n.length-1;e>=0;e--)a=oq.from(n[e].type.create(n[e].attrs,a));e.step(new bJ(t.start-(r?2:0),t.end,t.start,t.end,new fq(a,0,0),n.length,!0));let o=0;for(let e=0;e<n.length;e++)n[e].type==i&&(o=e+1);let s=n.length-o,c=t.start+n.length-(r?2:0),l=t.parent;for(let n=t.startIndex,r=t.endIndex,i=!0;n<r;n++,i=!1)!i&&OJ(e.doc,c,s)&&(e.split(c,s),c+=2*s),c+=l.child(n).nodeSize;return e}function CMe(e){return function(t,n){let{$from:r,$to:i}=t.selection,a=r.blockRange(i,t=>t.childCount>0&&t.firstChild.type==e);return a?n?r.node(a.depth-1).type==e?wMe(t,n,e,a):TMe(t,n,a):!0:!1}}function wMe(e,t,n,r){let i=e.tr,a=r.end,o=r.$to.end(r.depth);a<o&&(i.step(new bJ(a-1,o,a,o,new fq(oq.from(n.create(null,r.parent.copy())),1,0),1,!0)),r=new Tq(i.doc.resolve(r.$from.pos),i.doc.resolve(o),r.depth));let s=CJ(r);if(s==null)return!1;i.lift(r,s);let c=i.doc.resolve(i.mapping.map(a,-1)-1);return kJ(i.doc,c.pos)&&c.nodeBefore.type==c.nodeAfter.type&&i.join(c.pos),t(i.scrollIntoView()),!0}function TMe(e,t,n){let r=e.tr,i=n.parent;for(let e=n.end,t=n.endIndex-1,a=n.startIndex;t>a;t--)e-=i.child(t).nodeSize,r.delete(e-1,e+1);let a=r.doc.resolve(n.start),o=a.nodeAfter;if(r.mapping.map(n.end)!=n.start+a.nodeAfter.nodeSize)return!1;let s=n.startIndex==0,c=n.endIndex==i.childCount,l=a.node(-1),u=a.index(-1);if(!l.canReplace(u+ +!s,u+1,o.content.append(c?oq.empty:oq.from(i))))return!1;let d=a.pos,f=d+o.nodeSize;return r.step(new bJ(d-+!!s,f+ +!!c,d+1,f-1,new fq((s?oq.empty:oq.from(i.copy(oq.empty))).append(c?oq.empty:oq.from(i.copy(oq.empty))),+!s,+!c),+!s)),t(r.scrollIntoView()),!0}function EMe(e){return function(t,n){let{$from:r,$to:i}=t.selection,a=r.blockRange(i,t=>t.childCount>0&&t.firstChild.type==e);if(!a)return!1;let o=a.startIndex;if(o==0)return!1;let s=a.parent,c=s.child(o-1);if(c.type!=e)return!1;if(n){let r=c.lastChild&&c.lastChild.type==s.type,i=oq.from(r?e.create():null),o=new fq(oq.from(e.create(null,oq.from(s.type.create(null,i)))),r?3:1,0),l=a.start,u=a.end;n(t.tr.step(new bJ(l-(r?3:1),u,l,u,o,1,!0)).scrollIntoView())}return!0}}var BY=function(e){for(var t=0;;t++)if(e=e.previousSibling,!e)return t},VY=function(e){let t=e.assignedSlot||e.parentNode;return t&&t.nodeType==11?t.host:t},HY=null,UY=function(e,t,n){let r=HY||=document.createRange();return r.setEnd(e,n??e.nodeValue.length),r.setStart(e,t||0),r},DMe=function(){HY=null},WY=function(e,t,n,r){return n&&(GY(e,t,n,r,-1)||GY(e,t,n,r,1))},OMe=/^(img|br|input|textarea|hr)$/i;function GY(e,t,n,r,i){for(;;){if(e==n&&t==r)return!0;if(t==(i<0?0:KY(e))){let n=e.parentNode;if(!n||n.nodeType!=1||qY(e)||OMe.test(e.nodeName)||e.contentEditable==`false`)return!1;t=BY(e)+(i<0?0:1),e=n}else if(e.nodeType==1){let n=e.childNodes[t+(i<0?-1:0)];if(n.nodeType==1&&n.contentEditable==`false`)if(n.pmViewDesc?.ignoreForSelection)t+=i;else return!1;else e=n,t=i<0?KY(e):0}else return!1}}function KY(e){return e.nodeType==3?e.nodeValue.length:e.childNodes.length}function kMe(e,t){for(;;){if(e.nodeType==3&&t)return e;if(e.nodeType==1&&t>0){if(e.contentEditable==`false`)return null;e=e.childNodes[t-1],t=KY(e)}else if(e.parentNode&&!qY(e))t=BY(e),e=e.parentNode;else return null}}function AMe(e,t){for(;;){if(e.nodeType==3&&t<e.nodeValue.length)return e;if(e.nodeType==1&&t<e.childNodes.length){if(e.contentEditable==`false`)return null;e=e.childNodes[t],t=0}else if(e.parentNode&&!qY(e))t=BY(e)+1,e=e.parentNode;else return null}}function jMe(e,t,n){for(let r=t==0,i=t==KY(e);r||i;){if(e==n)return!0;let t=BY(e);if(e=e.parentNode,!e)return!1;r&&=t==0,i&&=t==KY(e)}}function qY(e){let t;for(let n=e;n&&!(t=n.pmViewDesc);n=n.parentNode);return t&&t.node&&t.node.isBlock&&(t.dom==e||t.contentDOM==e)}var JY=function(e){return e.focusNode&&WY(e.focusNode,e.focusOffset,e.anchorNode,e.anchorOffset)};function YY(e,t){let n=document.createEvent(`Event`);return n.initEvent(`keydown`,!0,!0),n.keyCode=e,n.key=n.code=t,n}function MMe(e){let t=e.activeElement;for(;t&&t.shadowRoot;)t=t.shadowRoot.activeElement;return t}function NMe(e,t,n){if(e.caretPositionFromPoint)try{let r=e.caretPositionFromPoint(t,n);if(r)return{node:r.offsetNode,offset:Math.min(KY(r.offsetNode),r.offset)}}catch{}if(e.caretRangeFromPoint){let r=e.caretRangeFromPoint(t,n);if(r)return{node:r.startContainer,offset:Math.min(KY(r.startContainer),r.startOffset)}}}var XY=typeof navigator<`u`?navigator:null,ZY=typeof document<`u`?document:null,QY=XY&&XY.userAgent||``,$Y=/Edge\/(\d+)/.exec(QY),eX=/MSIE \d/.exec(QY),tX=/Trident\/(?:[7-9]|\d{2,})\..*rv:(\d+)/.exec(QY),nX=!!(eX||tX||$Y),rX=eX?document.documentMode:tX?+tX[1]:$Y?+$Y[1]:0,iX=!nX&&/gecko\/(\d+)/i.test(QY);iX&&+(/Firefox\/(\d+)/.exec(QY)||[0,0])[1];var aX=!nX&&/Chrome\/(\d+)/.exec(QY),oX=!!aX,sX=aX?+aX[1]:0,cX=!nX&&!!XY&&/Apple Computer/.test(XY.vendor),lX=cX&&(/Mobile\/\w+/.test(QY)||!!XY&&XY.maxTouchPoints>2),uX=lX||(XY?/Mac/.test(XY.platform):!1),dX=XY?/Win/.test(XY.platform):!1,fX=/Android \d/.test(QY),pX=!!ZY&&`webkitFontSmoothing`in ZY.documentElement.style,PMe=pX?+(/\bAppleWebKit\/(\d+)/.exec(navigator.userAgent)||[0,0])[1]:0;function FMe(e){let t=e.defaultView&&e.defaultView.visualViewport;return t?{left:0,right:t.width,top:0,bottom:t.height}:{left:0,right:e.documentElement.clientWidth,top:0,bottom:e.documentElement.clientHeight}}function mX(e,t){return typeof e==`number`?e:e[t]}function IMe(e){let t=e.getBoundingClientRect(),n=t.width/e.offsetWidth||1,r=t.height/e.offsetHeight||1;return{left:t.left,right:t.left+e.clientWidth*n,top:t.top,bottom:t.top+e.clientHeight*r}}function hX(e,t,n){if(!SX(t)&&t.left==0)return;let r=e.someProp(`scrollThreshold`)||0,i=e.someProp(`scrollMargin`)||5,a=e.dom.ownerDocument;for(let o=n||e.dom;o;){if(o.nodeType!=1){o=VY(o);continue}let e=o,n=e==a.body,s=n?FMe(a):IMe(e),c=0,l=0;if(t.top<s.top+mX(r,`top`)?l=-(s.top-t.top+mX(i,`top`)):t.bottom>s.bottom-mX(r,`bottom`)&&(l=t.bottom-t.top>s.bottom-s.top?t.top+mX(i,`top`)-s.top:t.bottom-s.bottom+mX(i,`bottom`)),t.left<s.left+mX(r,`left`)?c=-(s.left-t.left+mX(i,`left`)):t.right>s.right-mX(r,`right`)&&(c=t.right-s.right+mX(i,`right`)),c||l)if(n)a.defaultView.scrollBy(c,l);else{let n=e.scrollLeft,r=e.scrollTop;l&&(e.scrollTop+=l),c&&(e.scrollLeft+=c);let i=e.scrollLeft-n,a=e.scrollTop-r;t={left:t.left-i,top:t.top-a,right:t.right-i,bottom:t.bottom-a}}let u=n?`fixed`:getComputedStyle(o).position;if(/^(fixed|sticky)$/.test(u))break;o=u==`absolute`?o.offsetParent:VY(o)}}function LMe(e){let t=e.dom.getBoundingClientRect(),n=Math.max(0,t.top),r,i;for(let a=(t.left+t.right)/2,o=n+1;o<Math.min(innerHeight,t.bottom);o+=5){let t=e.root.elementFromPoint(a,o);if(!t||t==e.dom||!e.dom.contains(t))continue;let s=t.getBoundingClientRect();if(s.top>=n-20){r=t,i=s.top;break}}return{refDOM:r,refTop:i,stack:gX(e.dom)}}function gX(e){let t=[],n=e.ownerDocument;for(let r=e;r&&(t.push({dom:r,top:r.scrollTop,left:r.scrollLeft}),e!=n);r=VY(r));return t}function RMe({refDOM:e,refTop:t,stack:n}){let r=e?e.getBoundingClientRect().top:0;_X(n,r==0?0:r-t)}function _X(e,t){for(let n=0;n<e.length;n++){let{dom:r,top:i,left:a}=e[n];r.scrollTop!=i+t&&(r.scrollTop=i+t),r.scrollLeft!=a&&(r.scrollLeft=a)}}var vX=null;function zMe(e){if(e.setActive)return e.setActive();if(vX)return e.focus(vX);let t=gX(e);e.focus(vX==null?{get preventScroll(){return vX={preventScroll:!0},!0}}:void 0),vX||(vX=!1,_X(t,0))}function yX(e,t){let n,r=2e8,i,a=0,o=t.top,s=t.top,c,l;for(let u=e.firstChild,d=0;u;u=u.nextSibling,d++){let e;if(u.nodeType==1)e=u.getClientRects();else if(u.nodeType==3)e=UY(u).getClientRects();else continue;for(let f=0;f<e.length;f++){let p=e[f];if(p.top<=o&&p.bottom>=s){o=Math.max(p.bottom,o),s=Math.min(p.top,s);let e=p.left>t.left?p.left-t.left:p.right<t.left?t.left-p.right:0;if(e<r){n=u,r=e,i=e&&n.nodeType==3?{left:p.right<t.left?p.right:p.left,top:t.top}:t,u.nodeType==1&&e&&(a=d+ +(t.left>=(p.left+p.right)/2));continue}}else p.top>t.top&&!c&&p.left<=t.left&&p.right>=t.left&&(c=u,l={left:Math.max(p.left,Math.min(p.right,t.left)),top:p.top});!n&&(t.left>=p.right&&t.top>=p.top||t.left>=p.left&&t.top>=p.bottom)&&(a=d+1)}}return!n&&c&&(n=c,i=l,r=0),n&&n.nodeType==3?BMe(n,i):!n||r&&n.nodeType==1?{node:e,offset:a}:yX(n,i)}function BMe(e,t){let n=e.nodeValue.length,r=document.createRange(),i;for(let a=0;a<n;a++){r.setEnd(e,a+1),r.setStart(e,a);let n=CX(r,1);if(n.top!=n.bottom&&bX(t,n)){i={node:e,offset:a+ +(t.left>=(n.left+n.right)/2)};break}}return r.detach(),i||{node:e,offset:0}}function bX(e,t){return e.left>=t.left-1&&e.left<=t.right+1&&e.top>=t.top-1&&e.top<=t.bottom+1}function VMe(e,t){let n=e.parentNode;return n&&/^li$/i.test(n.nodeName)&&t.left<e.getBoundingClientRect().left?n:e}function HMe(e,t,n){let{node:r,offset:i}=yX(t,n),a=-1;if(r.nodeType==1&&!r.firstChild){let e=r.getBoundingClientRect();a=e.left!=e.right&&n.left>(e.left+e.right)/2?1:-1}return e.docView.posFromDOM(r,i,a)}function UMe(e,t,n,r){let i=-1;for(let n=t,a=!1;n!=e.dom;){let t=e.docView.nearestDesc(n,!0),o;if(!t)return null;if(t.dom.nodeType==1&&(t.node.isBlock&&t.parent||!t.contentDOM)&&((o=t.dom.getBoundingClientRect()).width||o.height)&&(t.node.isBlock&&t.parent&&!/^T(R|BODY|HEAD|FOOT)$/.test(t.dom.nodeName)&&(!a&&o.left>r.left||o.top>r.top?i=t.posBefore:(!a&&o.right<r.left||o.bottom<r.top)&&(i=t.posAfter),a=!0),!t.contentDOM&&i<0&&!t.node.isText))return(t.node.isBlock?r.top<(o.top+o.bottom)/2:r.left<(o.left+o.right)/2)?t.posBefore:t.posAfter;n=t.dom.parentNode}return i>-1?i:e.docView.posFromDOM(t,n,-1)}function xX(e,t,n){let r=e.childNodes.length;if(r&&n.top<n.bottom)for(let i=Math.max(0,Math.min(r-1,Math.floor(r*(t.top-n.top)/(n.bottom-n.top))-2)),a=i;;){let n=e.childNodes[a];if(n.nodeType==1){let e=n.getClientRects();for(let r=0;r<e.length;r++){let i=e[r];if(bX(t,i))return xX(n,t,i)}}if((a=(a+1)%r)==i)break}return e}function WMe(e,t){let n=e.dom.ownerDocument,r,i=0,a=NMe(n,t.left,t.top);a&&({node:r,offset:i}=a);let o=(e.root.elementFromPoint?e.root:n).elementFromPoint(t.left,t.top),s;if(!o||!e.dom.contains(o.nodeType==1?o:o.parentNode)){let n=e.dom.getBoundingClientRect();if(!bX(t,n)||(o=xX(e.dom,t,n),!o))return null}if(cX)for(let e=o;r&&e;e=VY(e))e.draggable&&(r=void 0);if(o=VMe(o,t),r){if(iX&&r.nodeType==1&&(i=Math.min(i,r.childNodes.length),i<r.childNodes.length)){let e=r.childNodes[i],n;e.nodeName==`IMG`&&(n=e.getBoundingClientRect()).right<=t.left&&n.bottom>t.top&&i++}let n;pX&&i&&r.nodeType==1&&(n=r.childNodes[i-1]).nodeType==1&&n.contentEditable==`false`&&n.getBoundingClientRect().top>=t.top&&i--,r==e.dom&&i==r.childNodes.length-1&&r.lastChild.nodeType==1&&t.top>r.lastChild.getBoundingClientRect().bottom?s=e.state.doc.content.size:(i==0||r.nodeType!=1||r.childNodes[i-1].nodeName!=`BR`)&&(s=UMe(e,r,i,t))}s??=HMe(e,o,t);let c=e.docView.nearestDesc(o,!0);return{pos:s,inside:c?c.posAtStart-c.border:-1}}function SX(e){return e.top<e.bottom||e.left<e.right}function CX(e,t){let n=e.getClientRects();if(n.length){let e=n[t<0?0:n.length-1];if(SX(e))return e}return Array.prototype.find.call(n,SX)||e.getBoundingClientRect()}var GMe=/[\u0590-\u05f4\u0600-\u06ff\u0700-\u08ac]/;function wX(e,t,n){let{node:r,offset:i,atom:a}=e.docView.domFromPos(t,n<0?-1:1),o=pX||iX;if(r.nodeType==3)if(o&&(GMe.test(r.nodeValue)||(n<0?!i:i==r.nodeValue.length))){let e=CX(UY(r,i,i),n);if(iX&&i&&/\s/.test(r.nodeValue[i-1])&&i<r.nodeValue.length){let t=CX(UY(r,i-1,i-1),-1);if(t.top==e.top){let n=CX(UY(r,i,i+1),-1);if(n.top!=e.top)return TX(n,n.left<t.left)}}return e}else{let e=i,t=i,a=n<0?1:-1;return n<0&&!i?(t++,a=-1):n>=0&&i==r.nodeValue.length?(e--,a=1):n<0?e--:t++,TX(CX(UY(r,e,t),a),a<0)}if(!e.state.doc.resolve(t-(a||0)).parent.inlineContent){if(a==null&&i&&(n<0||i==KY(r))){let e=r.childNodes[i-1];if(e.nodeType==1)return EX(e.getBoundingClientRect(),!1)}if(a==null&&i<KY(r)){let e=r.childNodes[i];if(e.nodeType==1)return EX(e.getBoundingClientRect(),!0)}return EX(r.getBoundingClientRect(),n>=0)}if(a==null&&i&&(n<0||i==KY(r))){let e=r.childNodes[i-1],t=e.nodeType==3?UY(e,KY(e)-+!o):e.nodeType==1&&(e.nodeName!=`BR`||!e.nextSibling)?e:null;if(t)return TX(CX(t,1),!1)}if(a==null&&i<KY(r)){let e=r.childNodes[i];for(;e.pmViewDesc&&e.pmViewDesc.ignoreForCoords;)e=e.nextSibling;let t=e?e.nodeType==3?UY(e,0,+!o):e.nodeType==1?e:null:null;if(t)return TX(CX(t,-1),!0)}return TX(CX(r.nodeType==3?UY(r):r,-n),n>=0)}function TX(e,t){if(e.width==0)return e;let n=t?e.left:e.right;return{top:e.top,bottom:e.bottom,left:n,right:n}}function EX(e,t){if(e.height==0)return e;let n=t?e.top:e.bottom;return{top:n,bottom:n,left:e.left,right:e.right}}function DX(e,t,n){let r=e.state,i=e.root.activeElement;r!=t&&e.updateState(t),i!=e.dom&&e.focus();try{return n()}finally{r!=t&&e.updateState(r),i!=e.dom&&i&&i.focus()}}function KMe(e,t,n){let r=t.selection,i=n==`up`?r.$from:r.$to;return DX(e,t,()=>{let{node:t}=e.docView.domFromPos(i.pos,n==`up`?-1:1);for(;;){let n=e.docView.nearestDesc(t,!0);if(!n)break;if(n.node.isBlock){t=n.contentDOM||n.dom;break}t=n.dom.parentNode}let r=wX(e,i.pos,1);for(let e=t.firstChild;e;e=e.nextSibling){let t;if(e.nodeType==1)t=e.getClientRects();else if(e.nodeType==3)t=UY(e,0,e.nodeValue.length).getClientRects();else continue;for(let e=0;e<t.length;e++){let i=t[e];if(i.bottom>i.top+1&&(n==`up`?r.top-i.top>(i.bottom-r.top)*2:i.bottom-r.bottom>(r.bottom-i.top)*2))return!1}}return!0})}var qMe=/[\u0590-\u08ac]/;function JMe(e,t,n){let{$head:r}=t.selection;if(!r.parent.isTextblock)return!1;let i=r.parentOffset,a=!i,o=i==r.parent.content.size,s=e.domSelection();return s?!qMe.test(r.parent.textContent)||!s.modify?n==`left`||n==`backward`?a:o:DX(e,t,()=>{let{focusNode:t,focusOffset:i,anchorNode:a,anchorOffset:o}=e.domSelectionRange(),c=s.caretBidiLevel;s.modify(`move`,n,`character`);let l=r.depth?e.docView.domAfterPos(r.before()):e.dom,{focusNode:u,focusOffset:d}=e.domSelectionRange(),f=u&&!l.contains(u.nodeType==1?u:u.parentNode)||t==u&&i==d;try{s.collapse(a,o),t&&(t!=a||i!=o)&&s.extend&&s.extend(t,i)}catch{}return c!=null&&(s.caretBidiLevel=c),f}):r.pos==r.start()||r.pos==r.end()}var OX=null,kX=null,AX=!1;function YMe(e,t,n){return OX==t&&kX==n?AX:(OX=t,kX=n,AX=n==`up`||n==`down`?KMe(e,t,n):JMe(e,t,n))}var jX=0,MX=1,NX=2,PX=3,FX=class{constructor(e,t,n,r){this.parent=e,this.children=t,this.dom=n,this.contentDOM=r,this.dirty=jX,n.pmViewDesc=this}matchesWidget(e){return!1}matchesMark(e){return!1}matchesNode(e,t,n){return!1}matchesHack(e){return!1}parseRule(e){return null}stopEvent(e){return!1}get size(){let e=0;for(let t=0;t<this.children.length;t++)e+=this.children[t].size;return e}get border(){return 0}destroy(){this.parent=void 0,this.dom.pmViewDesc==this&&(this.dom.pmViewDesc=void 0);for(let e=0;e<this.children.length;e++)this.children[e].destroy()}posBeforeChild(e){for(let t=0,n=this.posAtStart;;t++){let r=this.children[t];if(r==e)return n;n+=r.size}}get posBefore(){return this.parent.posBeforeChild(this)}get posAtStart(){return this.parent?this.parent.posBeforeChild(this)+this.border:0}get posAfter(){return this.posBefore+this.size}get posAtEnd(){return this.posAtStart+this.size-2*this.border}localPosFromDOM(e,t,n){if(this.contentDOM&&this.contentDOM.contains(e.nodeType==1?e:e.parentNode))if(n<0){let n,r;if(e==this.contentDOM)n=e.childNodes[t-1];else{for(;e.parentNode!=this.contentDOM;)e=e.parentNode;n=e.previousSibling}for(;n&&!((r=n.pmViewDesc)&&r.parent==this);)n=n.previousSibling;return n?this.posBeforeChild(r)+r.size:this.posAtStart}else{let n,r;if(e==this.contentDOM)n=e.childNodes[t];else{for(;e.parentNode!=this.contentDOM;)e=e.parentNode;n=e.nextSibling}for(;n&&!((r=n.pmViewDesc)&&r.parent==this);)n=n.nextSibling;return n?this.posBeforeChild(r):this.posAtEnd}let r;if(e==this.dom&&this.contentDOM)r=t>BY(this.contentDOM);else if(this.contentDOM&&this.contentDOM!=this.dom&&this.dom.contains(this.contentDOM))r=e.compareDocumentPosition(this.contentDOM)&2;else if(this.dom.firstChild){if(t==0)for(let t=e;;t=t.parentNode){if(t==this.dom){r=!1;break}if(t.previousSibling)break}if(r==null&&t==e.childNodes.length)for(let t=e;;t=t.parentNode){if(t==this.dom){r=!0;break}if(t.nextSibling)break}}return r??n>0?this.posAtEnd:this.posAtStart}nearestDesc(e,t=!1){for(let n=!0,r=e;r;r=r.parentNode){let i=this.getDesc(r),a;if(i&&(!t||i.node))if(n&&(a=i.nodeDOM)&&!(a.nodeType==1?a.contains(e.nodeType==1?e:e.parentNode):a==e))n=!1;else return i}}getDesc(e){let t=e.pmViewDesc;for(let e=t;e;e=e.parent)if(e==this)return t}posFromDOM(e,t,n){for(let r=e;r;r=r.parentNode){let i=this.getDesc(r);if(i)return i.localPosFromDOM(e,t,n)}return-1}descAt(e){for(let t=0,n=0;t<this.children.length;t++){let r=this.children[t],i=n+r.size;if(n==e&&i!=n){for(;!r.border&&r.children.length;)for(let e=0;e<r.children.length;e++){let t=r.children[e];if(t.size){r=t;break}}return r}if(e<i)return r.descAt(e-n-r.border);n=i}}domFromPos(e,t){if(!this.contentDOM)return{node:this.dom,offset:0,atom:e+1};let n=0,r=0;for(let t=0;n<this.children.length;n++){let i=this.children[n],a=t+i.size;if(a>e||i instanceof VX){r=e-t;break}t=a}if(r)return this.children[n].domFromPos(r-this.children[n].border,t);for(let e;n&&!(e=this.children[n-1]).size&&e instanceof IX&&e.side>=0;n--);if(t<=0){let e,r=!0;for(;e=n?this.children[n-1]:null,!(!e||e.dom.parentNode==this.contentDOM);n--,r=!1);return e&&t&&r&&!e.border&&!e.domAtom?e.domFromPos(e.size,t):{node:this.contentDOM,offset:e?BY(e.dom)+1:0}}else{let e,r=!0;for(;e=n<this.children.length?this.children[n]:null,!(!e||e.dom.parentNode==this.contentDOM);n++,r=!1);return e&&r&&!e.border&&!e.domAtom?e.domFromPos(0,t):{node:this.contentDOM,offset:e?BY(e.dom):this.contentDOM.childNodes.length}}}parseRange(e,t,n=0){if(this.children.length==0)return{node:this.contentDOM,from:e,to:t,fromOffset:0,toOffset:this.contentDOM.childNodes.length};let r=-1,i=-1;for(let a=n,o=0;;o++){let n=this.children[o],s=a+n.size;if(r==-1&&e<=s){let i=a+n.border;if(e>=i&&t<=s-n.border&&n.node&&n.contentDOM&&this.contentDOM.contains(n.contentDOM))return n.parseRange(e,t,i);e=a;for(let t=o;t>0;t--){let n=this.children[t-1];if(n.size&&n.dom.parentNode==this.contentDOM&&!n.emptyChildAt(1)){r=BY(n.dom)+1;break}e-=n.size}r==-1&&(r=0)}if(r>-1&&(s>t||o==this.children.length-1)){t=s;for(let e=o+1;e<this.children.length;e++){let n=this.children[e];if(n.size&&n.dom.parentNode==this.contentDOM&&!n.emptyChildAt(-1)){i=BY(n.dom);break}t+=n.size}i==-1&&(i=this.contentDOM.childNodes.length);break}a=s}return{node:this.contentDOM,from:e,to:t,fromOffset:r,toOffset:i}}emptyChildAt(e){if(this.border||!this.contentDOM||!this.children.length)return!1;let t=this.children[e<0?0:this.children.length-1];return t.size==0||t.emptyChildAt(e)}domAfterPos(e){let{node:t,offset:n}=this.domFromPos(e,0);if(t.nodeType!=1||n==t.childNodes.length)throw RangeError(`No node after pos `+e);return t.childNodes[n]}setSelection(e,t,n,r=!1){let i=Math.min(e,t),a=Math.max(e,t);for(let o=0,s=0;o<this.children.length;o++){let c=this.children[o],l=s+c.size;if(i>s&&a<l)return c.setSelection(e-s-c.border,t-s-c.border,n,r);s=l}let o=this.domFromPos(e,e?-1:1),s=t==e?o:this.domFromPos(t,t?-1:1),c=n.root.getSelection(),l=n.domSelectionRange(),u=!1;if((iX||cX)&&e==t){let{node:e,offset:t}=o;if(e.nodeType==3){if(u=!!(t&&e.nodeValue[t-1]==`
-`),u&&t==e.nodeValue.length)for(let t=e,n;t;t=t.parentNode){if(n=t.nextSibling){n.nodeName==`BR`&&(o=s={node:n.parentNode,offset:BY(n)+1});break}let e=t.pmViewDesc;if(e&&e.node&&e.node.isBlock)break}}else{let n=e.childNodes[t-1];u=n&&(n.nodeName==`BR`||n.contentEditable==`false`)}}if(iX&&l.focusNode&&l.focusNode!=s.node&&l.focusNode.nodeType==1){let e=l.focusNode.childNodes[l.focusOffset];e&&e.contentEditable==`false`&&(r=!0)}if(!(r||u&&cX)&&WY(o.node,o.offset,l.anchorNode,l.anchorOffset)&&WY(s.node,s.offset,l.focusNode,l.focusOffset))return;let d=!1;if((c.extend||e==t)&&!(u&&iX)){c.collapse(o.node,o.offset);try{e!=t&&c.extend(s.node,s.offset),d=!0}catch{}}if(!d){if(e>t){let e=o;o=s,s=e}let n=document.createRange();n.setEnd(s.node,s.offset),n.setStart(o.node,o.offset),c.removeAllRanges(),c.addRange(n)}}ignoreMutation(e){return!this.contentDOM&&e.type!=`selection`}get contentLost(){return this.contentDOM&&this.contentDOM!=this.dom&&!this.dom.contains(this.contentDOM)}markDirty(e,t){for(let n=0,r=0;r<this.children.length;r++){let i=this.children[r],a=n+i.size;if(n==a?e<=a&&t>=n:e<a&&t>n){let r=n+i.border,o=a-i.border;if(e>=r&&t<=o){this.dirty=e==n||t==a?NX:MX,e==r&&t==o&&(i.contentLost||i.dom.parentNode!=this.contentDOM)?i.dirty=PX:i.markDirty(e-r,t-r);return}else i.dirty=i.dom==i.contentDOM&&i.dom.parentNode==this.contentDOM&&!i.children.length?NX:PX}n=a}this.dirty=NX}markParentsDirty(){let e=1;for(let t=this.parent;t;t=t.parent,e++){let n=e==1?NX:MX;t.dirty<n&&(t.dirty=n)}}get domAtom(){return!1}get ignoreForCoords(){return!1}get ignoreForSelection(){return!1}isText(e){return!1}},IX=class extends FX{constructor(e,t,n,r){let i,a=t.type.toDOM;if(typeof a==`function`&&(a=a(n,()=>{if(!i)return r;if(i.parent)return i.parent.posBeforeChild(i)})),!t.type.spec.raw){if(a.nodeType!=1){let e=document.createElement(`span`);e.appendChild(a),a=e}a.hasAttribute(`contenteditable`)||(a.contentEditable=`false`),a.classList.add(`ProseMirror-widget`)}super(e,[],a,null),this.widget=t,this.widget=t,i=this}matchesWidget(e){return this.dirty==jX&&e.type.eq(this.widget.type)}parseRule(){return{ignore:!0}}stopEvent(e){let t=this.widget.spec.stopEvent;return t?t(e):!1}ignoreMutation(e){return e.type!=`selection`||this.widget.spec.ignoreSelection}destroy(){this.widget.type.destroy(this.dom),super.destroy()}get domAtom(){return!0}get ignoreForSelection(){return!!this.widget.type.spec.relaxedSide}get side(){return this.widget.type.side}},XMe=class extends FX{constructor(e,t,n,r){super(e,[],t,null),this.textDOM=n,this.text=r}get size(){return this.text.length}localPosFromDOM(e,t){return e==this.textDOM?this.posAtStart+t:this.posAtStart+(t?this.size:0)}domFromPos(e){return{node:this.textDOM,offset:e}}ignoreMutation(e){return e.type===`characterData`&&e.target.nodeValue==e.oldValue}},LX=class e extends FX{constructor(e,t,n,r,i){super(e,[],n,r),this.mark=t,this.spec=i}static create(t,n,r,i){let a=i.nodeViews[n.type.name],o=a&&a(n,i,r);return(!o||!o.dom)&&(o=Qq.renderSpec(document,n.type.spec.toDOM(n,r),null,n.attrs)),new e(t,n,o.dom,o.contentDOM||o.dom,o)}parseRule(){return this.dirty&PX||this.mark.type.spec.reparseInView?null:{mark:this.mark.type.name,attrs:this.mark.attrs,contentElement:this.contentDOM}}matchesMark(e){return this.dirty!=PX&&this.mark.eq(e)}markDirty(e,t){if(super.markDirty(e,t),this.dirty!=jX){let e=this.parent;for(;!e.node;)e=e.parent;e.dirty<this.dirty&&(e.dirty=this.dirty),this.dirty=jX}}slice(t,n,r){let i=e.create(this.parent,this.mark,!0,r),a=this.children,o=this.size;n<o&&(a=YX(a,n,o,r)),t>0&&(a=YX(a,0,t,r));for(let e=0;e<a.length;e++)a[e].parent=i;return i.children=a,i}ignoreMutation(e){return this.spec.ignoreMutation?this.spec.ignoreMutation(e):super.ignoreMutation(e)}destroy(){this.spec.destroy&&this.spec.destroy(),super.destroy()}},RX=class e extends FX{constructor(e,t,n,r,i,a,o){super(e,[],i,a),this.node=t,this.outerDeco=n,this.innerDeco=r,this.nodeDOM=o}static create(t,n,r,i,a,o){let s=a.nodeViews[n.type.name],c,l=s&&s(n,a,()=>{if(!c)return o;if(c.parent)return c.parent.posBeforeChild(c)},r,i),u=l&&l.dom,d=l&&l.contentDOM;if(n.isText){if(!u)u=document.createTextNode(n.text);else if(u.nodeType!=3)throw RangeError(`Text must be rendered as a DOM text node`)}else if(!u){let e=Qq.renderSpec(document,n.type.spec.toDOM(n),null,n.attrs);({dom:u,contentDOM:d}=e)}!d&&!n.isText&&u.nodeName!=`BR`&&(u.hasAttribute(`contenteditable`)||(u.contentEditable=`false`),n.type.spec.draggable&&(u.draggable=!0));let f=u;return u=$Me(u,r,n),l?c=new ZMe(t,n,r,i,u,d||null,f,l):n.isText?new BX(t,n,r,i,u,f):new e(t,n,r,i,u,d||null,f)}parseRule(e){if(this.node.type.spec.reparseInView)return null;let t={node:this.node.type.name,attrs:this.node.attrs};if(this.node.type.whitespace==`pre`&&(t.preserveWhitespace=`full`),!this.contentDOM)t.getContent=()=>this.node.content;else if(!this.contentLost)t.contentElement=this.contentDOM;else{for(let e=this.children.length-1;e>=0;e--){let n=this.children[e];if(this.dom.contains(n.dom.parentNode)){t.contentElement=n.dom.parentNode;break}}if(!t.contentElement){let n=e&&e.find(t=>t.nodeType==1&&e.indexOf(t.parentNode)<0&&this.dom.contains(t));n?t.contentElement=n:t.getContent=()=>oq.empty}}return t}matchesNode(e,t,n){return this.dirty==jX&&e.eq(this.node)&&qX(t,this.outerDeco)&&n.eq(this.innerDeco)}get size(){return this.node.nodeSize}get border(){return+!this.node.isLeaf}updateChildren(e,t){let n=this.node.inlineContent,r=t,i=e.composing?this.localCompositionInfo(e,t):null,a=i&&i.pos>-1?i:null,o=i&&i.pos<0,s=new eNe(this,a&&a.node,e);rNe(this.node,this.innerDeco,(t,i,a)=>{t.spec.marks?s.syncToMarks(t.spec.marks,n,e,i):t.type.side>=0&&!a&&s.syncToMarks(i==this.node.childCount?uq.none:this.node.child(i).marks,n,e,i),s.placeWidget(t,e,r)},(t,a,c,l)=>{s.syncToMarks(t.marks,n,e,l);let u;s.findNodeMatch(t,a,c,l)||o&&e.state.selection.from>r&&e.state.selection.to<r+t.nodeSize&&(u=s.findIndexWithChild(i.node))>-1&&s.updateNodeAt(t,a,c,u,e)||s.updateNextNode(t,a,c,e,l,r)||s.addNode(t,a,c,e,r),r+=t.nodeSize}),s.syncToMarks([],n,e,0),this.node.isTextblock&&s.addTextblockHacks(),s.destroyRest(),(s.changed||this.dirty==NX)&&(a&&this.protectLocalComposition(e,a),HX(this.contentDOM,this.children,e),lX&&iNe(this.dom))}localCompositionInfo(e,t){let{from:n,to:r}=e.state.selection;if(!(e.state.selection instanceof ZJ)||n<t||r>t+this.node.content.size)return null;let i=e.input.compositionNode;if(!i||!this.dom.contains(i.parentNode))return null;if(this.node.inlineContent){let e=i.nodeValue,a=aNe(this.node.content,e,n-t,r-t);return a<0?null:{node:i,pos:a,text:e}}else return{node:i,pos:-1,text:``}}protectLocalComposition(e,{node:t,pos:n,text:r}){if(this.getDesc(t))return;let i=t;for(;i.parentNode!=this.contentDOM;i=i.parentNode){for(;i.previousSibling;)i.parentNode.removeChild(i.previousSibling);for(;i.nextSibling;)i.parentNode.removeChild(i.nextSibling);i.pmViewDesc&&=void 0}let a=new XMe(this,i,t,r);e.input.compositionNodes.push(a),this.children=YX(this.children,n,n+r.length,e,a)}update(e,t,n,r){return this.dirty==PX||!e.sameMarkup(this.node)?!1:(this.updateInner(e,t,n,r),!0)}updateInner(e,t,n,r){this.updateOuterDeco(t),this.node=e,this.innerDeco=n,this.contentDOM&&this.updateChildren(r,this.posAtStart),this.dirty=jX}updateOuterDeco(e){if(qX(e,this.outerDeco))return;let t=this.nodeDOM.nodeType!=1,n=this.dom;this.dom=KX(this.dom,this.nodeDOM,GX(this.outerDeco,this.node,t),GX(e,this.node,t)),this.dom!=n&&(n.pmViewDesc=void 0,this.dom.pmViewDesc=this),this.outerDeco=e}selectNode(){this.nodeDOM.nodeType==1&&(this.nodeDOM.classList.add(`ProseMirror-selectednode`),(this.contentDOM||!this.node.type.spec.draggable)&&(this.nodeDOM.draggable=!0))}deselectNode(){this.nodeDOM.nodeType==1&&(this.nodeDOM.classList.remove(`ProseMirror-selectednode`),(this.contentDOM||!this.node.type.spec.draggable)&&this.nodeDOM.removeAttribute(`draggable`))}get domAtom(){return this.node.isAtom}};function zX(e,t,n,r,i){$Me(r,t,e);let a=new RX(void 0,e,t,n,r,r,r);return a.contentDOM&&a.updateChildren(i,0),a}var BX=class e extends RX{constructor(e,t,n,r,i,a){super(e,t,n,r,i,null,a)}parseRule(){let e=this.nodeDOM.parentNode;for(;e&&e!=this.dom&&!e.pmIsDeco;)e=e.parentNode;return{skip:e||!0}}update(e,t,n,r){return this.dirty==PX||this.dirty!=jX&&!this.inParent()||!e.sameMarkup(this.node)?!1:(this.updateOuterDeco(t),(this.dirty!=jX||e.text!=this.node.text)&&e.text!=this.nodeDOM.nodeValue&&(this.nodeDOM.nodeValue=e.text,r.trackWrites==this.nodeDOM&&(r.trackWrites=null)),this.node=e,this.dirty=jX,!0)}inParent(){let e=this.parent.contentDOM;for(let t=this.nodeDOM;t;t=t.parentNode)if(t==e)return!0;return!1}domFromPos(e){return{node:this.nodeDOM,offset:e}}localPosFromDOM(e,t,n){return e==this.nodeDOM?this.posAtStart+Math.min(t,this.node.text.length):super.localPosFromDOM(e,t,n)}ignoreMutation(e){return e.type!=`characterData`&&e.type!=`selection`}slice(t,n,r){let i=this.node.cut(t,n),a=document.createTextNode(i.text);return new e(this.parent,i,this.outerDeco,this.innerDeco,a,a)}markDirty(e,t){super.markDirty(e,t),this.dom!=this.nodeDOM&&(e==0||t==this.nodeDOM.nodeValue.length)&&(this.dirty=PX)}get domAtom(){return!1}isText(e){return this.node.text==e}},VX=class extends FX{parseRule(){return{ignore:!0}}matchesHack(e){return this.dirty==jX&&this.dom.nodeName==e}get domAtom(){return!0}get ignoreForCoords(){return this.dom.nodeName==`IMG`}},ZMe=class extends RX{constructor(e,t,n,r,i,a,o,s){super(e,t,n,r,i,a,o),this.spec=s}update(e,t,n,r){if(this.dirty==PX)return!1;if(this.spec.update&&(this.node.type==e.type||this.spec.multiType)){let i=this.spec.update(e,t,n);return i&&this.updateInner(e,t,n,r),i}else if(!this.contentDOM&&!e.isLeaf)return!1;else return super.update(e,t,n,r)}selectNode(){this.spec.selectNode?this.spec.selectNode():super.selectNode()}deselectNode(){this.spec.deselectNode?this.spec.deselectNode():super.deselectNode()}setSelection(e,t,n,r){this.spec.setSelection?this.spec.setSelection(e,t,n.root):super.setSelection(e,t,n,r)}destroy(){this.spec.destroy&&this.spec.destroy(),super.destroy()}stopEvent(e){return this.spec.stopEvent?this.spec.stopEvent(e):!1}ignoreMutation(e){return this.spec.ignoreMutation?this.spec.ignoreMutation(e):super.ignoreMutation(e)}};function HX(e,t,n){let r=e.firstChild,i=!1;for(let a=0;a<t.length;a++){let o=t[a],s=o.dom;if(s.parentNode==e){for(;s!=r;)r=JX(r),i=!0;r=r.nextSibling}else i=!0,e.insertBefore(s,r);if(o instanceof LX){let t=r?r.previousSibling:e.lastChild;HX(o.contentDOM,o.children,n),r=t?t.nextSibling:e.firstChild}}for(;r;)r=JX(r),i=!0;i&&n.trackWrites==e&&(n.trackWrites=null)}var UX=function(e){e&&(this.nodeName=e)};UX.prototype=Object.create(null);var WX=[new UX];function GX(e,t,n){if(e.length==0)return WX;let r=n?WX[0]:new UX,i=[r];for(let a=0;a<e.length;a++){let o=e[a].type.attrs;if(o){o.nodeName&&i.push(r=new UX(o.nodeName));for(let e in o){let a=o[e];a!=null&&(n&&i.length==1&&i.push(r=new UX(t.isInline?`span`:`div`)),e==`class`?r.class=(r.class?r.class+` `:``)+a:e==`style`?r.style=(r.style?r.style+`;`:``)+a:e!=`nodeName`&&(r[e]=a))}}}return i}function KX(e,t,n,r){if(n==WX&&r==WX)return t;let i=t;for(let t=0;t<r.length;t++){let a=r[t],o=n[t];if(t){let t;o&&o.nodeName==a.nodeName&&i!=e&&(t=i.parentNode)&&t.nodeName.toLowerCase()==a.nodeName?i=t:(t=document.createElement(a.nodeName),t.pmIsDeco=!0,t.appendChild(i),o=WX[0],i=t)}QMe(i,o||WX[0],a)}return i}function QMe(e,t,n){for(let r in t)r!=`class`&&r!=`style`&&r!=`nodeName`&&!(r in n)&&e.removeAttribute(r);for(let r in n)r!=`class`&&r!=`style`&&r!=`nodeName`&&n[r]!=t[r]&&e.setAttribute(r,n[r]);if(t.class!=n.class){let r=t.class?t.class.split(` `).filter(Boolean):[],i=n.class?n.class.split(` `).filter(Boolean):[];for(let t=0;t<r.length;t++)i.indexOf(r[t])==-1&&e.classList.remove(r[t]);for(let t=0;t<i.length;t++)r.indexOf(i[t])==-1&&e.classList.add(i[t]);e.classList.length==0&&e.removeAttribute(`class`)}if(t.style!=n.style){if(t.style){let n=/\s*([\w\-\xa1-\uffff]+)\s*:(?:"(?:\\.|[^"])*"|'(?:\\.|[^'])*'|\(.*?\)|[^;])*/g,r;for(;r=n.exec(t.style);)e.style.removeProperty(r[1])}n.style&&(e.style.cssText+=n.style)}}function $Me(e,t,n){return KX(e,e,WX,GX(t,n,e.nodeType!=1))}function qX(e,t){if(e.length!=t.length)return!1;for(let n=0;n<e.length;n++)if(!e[n].type.eq(t[n].type))return!1;return!0}function JX(e){let t=e.nextSibling;return e.parentNode.removeChild(e),t}var eNe=class{constructor(e,t,n){this.lock=t,this.view=n,this.index=0,this.stack=[],this.changed=!1,this.top=e,this.preMatch=tNe(e.node.content,e)}destroyBetween(e,t){if(e!=t){for(let n=e;n<t;n++)this.top.children[n].destroy();this.top.children.splice(e,t-e),this.changed=!0}}destroyRest(){this.destroyBetween(this.index,this.top.children.length)}syncToMarks(e,t,n,r){let i=0,a=this.stack.length>>1,o=Math.min(a,e.length);for(;i<o&&(i==a-1?this.top:this.stack[i+1<<1]).matchesMark(e[i])&&e[i].type.spec.spanning!==!1;)i++;for(;i<a;)this.destroyRest(),this.top.dirty=jX,this.index=this.stack.pop(),this.top=this.stack.pop(),a--;for(;a<e.length;){this.stack.push(this.top,this.index+1);let i=-1,o=this.top.children.length;r<this.preMatch.index&&(o=Math.min(this.index+3,o));for(let t=this.index;t<o;t++){let n=this.top.children[t];if(n.matchesMark(e[a])&&!this.isLocked(n.dom)){i=t;break}}if(i<0&&this.index<this.top.children.length){let t=this.top.children[this.index];t instanceof LX&&t.dirty!=PX&&t.mark.type==e[a].type&&t.spec.update&&!this.isLocked(t.dom)&&t.spec.update(e[a])&&(t.mark=e[a],i=this.index,this.changed=!0)}if(i>-1)i>this.index&&(this.changed=!0,this.destroyBetween(this.index,i)),this.top=this.top.children[this.index];else{let r=LX.create(this.top,e[a],t,n);this.top.children.splice(this.index,0,r),this.top=r,this.changed=!0}this.index=0,a++}}findNodeMatch(e,t,n,r){let i=-1,a;if(r>=this.preMatch.index&&(a=this.preMatch.matches[r-this.preMatch.index]).parent==this.top&&a.matchesNode(e,t,n))i=this.top.children.indexOf(a,this.index);else for(let r=this.index,a=Math.min(this.top.children.length,r+5);r<a;r++){let a=this.top.children[r];if(a.matchesNode(e,t,n)&&!this.preMatch.matched.has(a)){i=r;break}}return i<0?!1:(this.destroyBetween(this.index,i),this.index++,!0)}updateNodeAt(e,t,n,r,i){let a=this.top.children[r];return a.dirty==PX&&a.dom==a.contentDOM&&(a.dirty=NX),a.update(e,t,n,i)?(this.destroyBetween(this.index,r),this.index++,!0):!1}findIndexWithChild(e){for(;;){let t=e.parentNode;if(!t)return-1;if(t==this.top.contentDOM){let t=e.pmViewDesc;if(t){for(let e=this.index;e<this.top.children.length;e++)if(this.top.children[e]==t)return e}return-1}e=t}}updateNextNode(e,t,n,r,i,a){for(let o=this.index;o<this.top.children.length;o++){let s=this.top.children[o];if(s instanceof RX){let c=this.preMatch.matched.get(s);if(c!=null&&c!=i)return!1;let l=s.dom,u,d=this.isLocked(l)&&!(e.isText&&s.node&&s.node.isText&&s.nodeDOM.nodeValue==e.text&&s.dirty!=PX&&qX(t,s.outerDeco));if(!d&&s.update(e,t,n,r))return this.destroyBetween(this.index,o),s.dom!=l&&(this.changed=!0),this.index++,!0;if(!d&&(u=this.recreateWrapper(s,e,t,n,r,a)))return this.destroyBetween(this.index,o),this.top.children[this.index]=u,u.contentDOM&&(u.dirty=NX,u.updateChildren(r,a+1),u.dirty=jX),this.changed=!0,this.index++,!0;break}}return!1}recreateWrapper(e,t,n,r,i,a){if(e.dirty||t.isAtom||!e.children.length||!e.node.content.eq(t.content)||!qX(n,e.outerDeco)||!r.eq(e.innerDeco))return null;let o=RX.create(this.top,t,n,r,i,a);if(o.contentDOM){o.children=e.children,e.children=[];for(let e of o.children)e.parent=o}return e.destroy(),o}addNode(e,t,n,r,i){let a=RX.create(this.top,e,t,n,r,i);a.contentDOM&&a.updateChildren(r,i+1),this.top.children.splice(this.index++,0,a),this.changed=!0}placeWidget(e,t,n){let r=this.index<this.top.children.length?this.top.children[this.index]:null;if(r&&r.matchesWidget(e)&&(e==r.widget||!r.widget.type.toDOM.parentNode))this.index++;else{let r=new IX(this.top,e,t,n);this.top.children.splice(this.index++,0,r),this.changed=!0}}addTextblockHacks(){let e=this.top.children[this.index-1],t=this.top;for(;e instanceof LX;)t=e,e=t.children[t.children.length-1];(!e||!(e instanceof BX)||/\n$/.test(e.node.text)||this.view.requiresGeckoHackNode&&/\s$/.test(e.node.text))&&((cX||oX)&&e&&e.dom.contentEditable==`false`&&this.addHackNode(`IMG`,t),this.addHackNode(`BR`,this.top))}addHackNode(e,t){if(t==this.top&&this.index<t.children.length&&t.children[this.index].matchesHack(e))this.index++;else{let n=document.createElement(e);e==`IMG`&&(n.className=`ProseMirror-separator`,n.alt=``),e==`BR`&&(n.className=`ProseMirror-trailingBreak`);let r=new VX(this.top,[],n,null);t==this.top?t.children.splice(this.index++,0,r):t.children.push(r),this.changed=!0}}isLocked(e){return this.lock&&(e==this.lock||e.nodeType==1&&e.contains(this.lock.parentNode))}};function tNe(e,t){let n=t,r=n.children.length,i=e.childCount,a=new Map,o=[];outer:for(;i>0;){let s;for(;;)if(r){let e=n.children[r-1];if(e instanceof LX)n=e,r=e.children.length;else{s=e,r--;break}}else if(n==t)break outer;else r=n.parent.children.indexOf(n),n=n.parent;let c=s.node;if(c){if(c!=e.child(i-1))break;--i,a.set(s,i),o.push(s)}}return{index:i,matched:a,matches:o.reverse()}}function nNe(e,t){return e.type.side-t.type.side}function rNe(e,t,n,r){let i=t.locals(e),a=0;if(i.length==0){for(let n=0;n<e.childCount;n++){let o=e.child(n);r(o,i,t.forChild(a,o),n),a+=o.nodeSize}return}let o=0,s=[],c=null;for(let l=0;;){let u,d;for(;o<i.length&&i[o].to==a;){let e=i[o++];e.widget&&(u?(d||=[u]).push(e):u=e)}if(u)if(d){d.sort(nNe);for(let e=0;e<d.length;e++)n(d[e],l,!!c)}else n(u,l,!!c);let f,p;if(c)p=-1,f=c,c=null;else if(l<e.childCount)p=l,f=e.child(l++);else break;for(let e=0;e<s.length;e++)s[e].to<=a&&s.splice(e--,1);for(;o<i.length&&i[o].from<=a&&i[o].to>a;)s.push(i[o++]);let m=a+f.nodeSize;if(f.isText){let e=m;o<i.length&&i[o].from<e&&(e=i[o].from);for(let t=0;t<s.length;t++)s[t].to<e&&(e=s[t].to);e<m&&(c=f.cut(e-a),f=f.cut(0,e-a),m=e,p=-1)}else for(;o<i.length&&i[o].to<m;)o++;let h=f.isInline&&!f.isLeaf?s.filter(e=>!e.inline):s.slice();r(f,h,t.forChild(a,f),p),a=m}}function iNe(e){if(e.nodeName==`UL`||e.nodeName==`OL`){let t=e.style.cssText;e.style.cssText=t+`; list-style: square !important`,window.getComputedStyle(e).listStyle,e.style.cssText=t}}function aNe(e,t,n,r){for(let i=0,a=0;i<e.childCount&&a<=r;){let o=e.child(i++),s=a;if(a+=o.nodeSize,!o.isText)continue;let c=o.text;for(;i<e.childCount;){let t=e.child(i++);if(a+=t.nodeSize,!t.isText)break;c+=t.text}if(a>=n){if(a>=r&&c.slice(r-t.length-s,r-s)==t)return r-t.length;let e=s<r?c.lastIndexOf(t,r-s-1):-1;if(e>=0&&e+t.length+s>=n)return s+e;if(n==r&&c.length>=r+t.length-s&&c.slice(r-s,r-s+t.length)==t)return r}}return-1}function YX(e,t,n,r,i){let a=[];for(let o=0,s=0;o<e.length;o++){let c=e[o],l=s,u=s+=c.size;l>=n||u<=t?a.push(c):(l<t&&a.push(c.slice(0,t-l,r)),i&&=(a.push(i),void 0),u>n&&a.push(c.slice(n-l,c.size,r)))}return a}function XX(e,t=null){let n=e.domSelectionRange(),r=e.state.doc;if(!n.focusNode)return null;let i=e.docView.nearestDesc(n.focusNode),a=i&&i.size==0,o=e.docView.posFromDOM(n.focusNode,n.focusOffset,1);if(o<0)return null;let s=r.resolve(o),c,l;if(JY(n)){for(c=o;i&&!i.node;)i=i.parent;let e=i.node;if(i&&e.isAtom&&$J.isSelectable(e)&&i.parent&&!(e.isInline&&jMe(n.focusNode,n.focusOffset,i.dom))){let e=i.posBefore;l=new $J(o==e?s:r.resolve(e))}}else{if(n instanceof e.dom.ownerDocument.defaultView.Selection&&n.rangeCount>1){let t=o,i=o;for(let r=0;r<n.rangeCount;r++){let a=n.getRangeAt(r);t=Math.min(t,e.docView.posFromDOM(a.startContainer,a.startOffset,1)),i=Math.max(i,e.docView.posFromDOM(a.endContainer,a.endOffset,-1))}if(t<0)return null;[c,o]=i==e.state.selection.anchor?[i,t]:[t,i],s=r.resolve(o)}else c=e.docView.posFromDOM(n.anchorNode,n.anchorOffset,1);if(c<0)return null}let u=r.resolve(c);if(!l){let n=t==`pointer`||e.state.selection.head<s.pos&&!a?1:-1;l=aZ(e,u,s,n)}return l}function ZX(e){return e.editable?e.hasFocus():sZ(e)&&document.activeElement&&document.activeElement.contains(e.dom)}function QX(e,t=!1){let n=e.state.selection;if(rZ(e,n),!ZX(e))return;let r=e.input.mouseDown;if(!t&&oX&&r){let t=e.domSelectionRange(),n=e.domObserver.currentSelection;if(t.anchorNode&&n.anchorNode&&WY(t.anchorNode,t.anchorOffset,n.anchorNode,n.anchorOffset)&&r.delaySelUpdate()){e.domObserver.setCurSelection();return}}if(e.domObserver.disconnectSelection(),e.cursorWrapper)sNe(e);else{let{anchor:r,head:i}=n,a,o;$X&&!(n instanceof ZJ)&&(n.$from.parent.inlineContent||(a=eZ(e,n.from)),!n.empty&&!n.$from.parent.inlineContent&&(o=eZ(e,n.to))),e.docView.setSelection(r,i,e,t),$X&&(a&&nZ(a),o&&nZ(o)),n.visible?e.dom.classList.remove(`ProseMirror-hideselection`):(e.dom.classList.add(`ProseMirror-hideselection`),`onselectionchange`in document&&oNe(e))}e.domObserver.setCurSelection(),e.domObserver.connectSelection()}var $X=cX||oX&&sX<63;function eZ(e,t){let{node:n,offset:r}=e.docView.domFromPos(t,0),i=r<n.childNodes.length?n.childNodes[r]:null,a=r?n.childNodes[r-1]:null;if(cX&&i&&i.contentEditable==`false`)return tZ(i);if((!i||i.contentEditable==`false`)&&(!a||a.contentEditable==`false`)){if(i)return tZ(i);if(a)return tZ(a)}}function tZ(e){return e.contentEditable=`true`,cX&&e.draggable&&(e.draggable=!1,e.wasDraggable=!0),e}function nZ(e){e.contentEditable=`false`,e.wasDraggable&&=(e.draggable=!0,null)}function oNe(e){let t=e.dom.ownerDocument;t.removeEventListener(`selectionchange`,e.input.hideSelectionGuard);let n=e.domSelectionRange(),r=n.anchorNode,i=n.anchorOffset;t.addEventListener(`selectionchange`,e.input.hideSelectionGuard=()=>{(n.anchorNode!=r||n.anchorOffset!=i)&&(t.removeEventListener(`selectionchange`,e.input.hideSelectionGuard),setTimeout(()=>{(!ZX(e)||e.state.selection.visible)&&e.dom.classList.remove(`ProseMirror-hideselection`)},20))})}function sNe(e){let t=e.domSelection();if(!t)return;let n=e.cursorWrapper.dom,r=n.nodeName==`IMG`;r?t.collapse(n.parentNode,BY(n)+1):t.collapse(n,0),!r&&!e.state.selection.visible&&nX&&rX<=11&&(n.disabled=!0,n.disabled=!1)}function rZ(e,t){if(t instanceof $J){let n=e.docView.descAt(t.from);n!=e.lastSelectedViewDesc&&(iZ(e),n&&n.selectNode(),e.lastSelectedViewDesc=n)}else iZ(e)}function iZ(e){e.lastSelectedViewDesc&&=(e.lastSelectedViewDesc.parent&&e.lastSelectedViewDesc.deselectNode(),void 0)}function aZ(e,t,n,r){return e.someProp(`createSelectionBetween`,r=>r(e,t,n))||ZJ.between(t,n,r)}function oZ(e){return e.editable&&!e.hasFocus()?!1:sZ(e)}function sZ(e){let t=e.domSelectionRange();if(!t.anchorNode)return!1;try{return e.dom.contains(t.anchorNode.nodeType==3?t.anchorNode.parentNode:t.anchorNode)&&(e.editable||e.dom.contains(t.focusNode.nodeType==3?t.focusNode.parentNode:t.focusNode))}catch{return!1}}function cNe(e){let t=e.docView.domFromPos(e.state.selection.anchor,0),n=e.domSelectionRange();return WY(t.node,t.offset,n.anchorNode,n.anchorOffset)}function cZ(e,t){let{$anchor:n,$head:r}=e.selection,i=t>0?n.max(r):n.min(r),a=i.parent.inlineContent?i.depth?e.doc.resolve(t>0?i.after():i.before()):null:i;return a&&JJ.findFrom(a,t)}function lZ(e,t){return e.dispatch(e.state.tr.setSelection(t).scrollIntoView()),!0}function uZ(e,t,n){let r=e.state.selection;if(r instanceof ZJ){if(n.indexOf(`s`)>-1){let{$head:n}=r,i=n.textOffset?null:t<0?n.nodeBefore:n.nodeAfter;if(!i||i.isText||!i.isLeaf)return!1;let a=e.state.doc.resolve(n.pos+i.nodeSize*(t<0?-1:1));return lZ(e,new ZJ(r.$anchor,a))}else if(!r.empty)return!1;else if(e.endOfTextblock(t>0?`forward`:`backward`)){let n=cZ(e.state,t);return n&&n instanceof $J?lZ(e,n):!1}else if(!(uX&&n.indexOf(`m`)>-1)){let n=r.$head,i=n.textOffset?null:t<0?n.nodeBefore:n.nodeAfter,a;if(!i||i.isText)return!1;let o=t<0?n.pos-i.nodeSize:n.pos;return i.isAtom||(a=e.docView.descAt(o))&&!a.contentDOM?$J.isSelectable(i)?lZ(e,new $J(t<0?e.state.doc.resolve(n.pos-i.nodeSize):n)):pX?lZ(e,new ZJ(e.state.doc.resolve(t<0?o:o+i.nodeSize))):!1:!1}}else if(r instanceof $J&&r.node.isInline)return lZ(e,new ZJ(t>0?r.$to:r.$from));else{let n=cZ(e.state,t);return n?lZ(e,n):!1}}function dZ(e){return e.nodeType==3?e.nodeValue.length:e.childNodes.length}function fZ(e,t){let n=e.pmViewDesc;return n&&n.size==0&&(t<0||e.nextSibling||e.nodeName!=`BR`)}function pZ(e,t){return t<0?lNe(e):uNe(e)}function lNe(e){let t=e.domSelectionRange(),n=t.focusNode,r=t.focusOffset;if(!n)return;let i,a,o=!1;for(iX&&n.nodeType==1&&r<dZ(n)&&fZ(n.childNodes[r],-1)&&(o=!0);;)if(r>0){if(n.nodeType!=1)break;{let e=n.childNodes[r-1];if(fZ(e,-1))i=n,a=--r;else if(e.nodeType==3)n=e,r=n.nodeValue.length;else break}}else if(mZ(n))break;else{let t=n.previousSibling;for(;t&&fZ(t,-1);)i=n.parentNode,a=BY(t),t=t.previousSibling;if(t)n=t,r=dZ(n);else{if(n=n.parentNode,n==e.dom)break;r=0}}o?hZ(e,n,r):i&&hZ(e,i,a)}function uNe(e){let t=e.domSelectionRange(),n=t.focusNode,r=t.focusOffset;if(!n)return;let i=dZ(n),a,o;for(;;)if(r<i){if(n.nodeType!=1)break;let e=n.childNodes[r];if(fZ(e,1))a=n,o=++r;else break}else if(mZ(n))break;else{let t=n.nextSibling;for(;t&&fZ(t,1);)a=t.parentNode,o=BY(t)+1,t=t.nextSibling;if(t)n=t,r=0,i=dZ(n);else{if(n=n.parentNode,n==e.dom)break;r=i=0}}a&&hZ(e,a,o)}function mZ(e){let t=e.pmViewDesc;return t&&t.node&&t.node.isBlock}function dNe(e,t){for(;e&&t==e.childNodes.length&&!qY(e);)t=BY(e)+1,e=e.parentNode;for(;e&&t<e.childNodes.length;){let n=e.childNodes[t];if(n.nodeType==3)return n;if(n.nodeType==1&&n.contentEditable==`false`)break;e=n,t=0}}function fNe(e,t){for(;e&&!t&&!qY(e);)t=BY(e),e=e.parentNode;for(;e&&t;){let n=e.childNodes[t-1];if(n.nodeType==3)return n;if(n.nodeType==1&&n.contentEditable==`false`)break;e=n,t=e.childNodes.length}}function hZ(e,t,n){if(t.nodeType!=3){let e,r;(r=dNe(t,n))?(t=r,n=0):(e=fNe(t,n))&&(t=e,n=e.nodeValue.length)}let r=e.domSelection();if(!r)return;if(JY(r)){let e=document.createRange();e.setEnd(t,n),e.setStart(t,n),r.removeAllRanges(),r.addRange(e)}else r.extend&&r.extend(t,n);e.domObserver.setCurSelection();let{state:i}=e;setTimeout(()=>{e.state==i&&QX(e)},50)}function gZ(e,t){let n=e.state.doc.resolve(t);if(!(oX||dX)&&n.parent.inlineContent){let r=e.coordsAtPos(t);if(t>n.start()){let n=e.coordsAtPos(t-1),i=(n.top+n.bottom)/2;if(i>r.top&&i<r.bottom&&Math.abs(n.left-r.left)>1)return n.left<r.left?`ltr`:`rtl`}if(t<n.end()){let n=e.coordsAtPos(t+1),i=(n.top+n.bottom)/2;if(i>r.top&&i<r.bottom&&Math.abs(n.left-r.left)>1)return n.left>r.left?`ltr`:`rtl`}}return getComputedStyle(e.dom).direction==`rtl`?`rtl`:`ltr`}function _Z(e,t,n){let r=e.state.selection;if(r instanceof ZJ&&!r.empty||n.indexOf(`s`)>-1||uX&&n.indexOf(`m`)>-1)return!1;let{$from:i,$to:a}=r;if(!i.parent.inlineContent||e.endOfTextblock(t<0?`up`:`down`)){let n=cZ(e.state,t);if(n&&n instanceof $J)return lZ(e,n)}if(!i.parent.inlineContent){let n=t<0?i:a,o=r instanceof eY?JJ.near(n,t):JJ.findFrom(n,t);return o?lZ(e,o):!1}return!1}function vZ(e,t){if(!(e.state.selection instanceof ZJ))return!0;let{$head:n,$anchor:r,empty:i}=e.state.selection;if(!n.sameParent(r))return!0;if(!i)return!1;if(e.endOfTextblock(t>0?`forward`:`backward`))return!0;let a=!n.textOffset&&(t<0?n.nodeBefore:n.nodeAfter);if(a&&!a.isText){let r=e.state.tr;return t<0?r.delete(n.pos-a.nodeSize,n.pos):r.delete(n.pos,n.pos+a.nodeSize),e.dispatch(r),!0}return!1}function yZ(e,t,n){e.domObserver.stop(),t.contentEditable=n,e.domObserver.start()}function pNe(e){if(!cX||e.state.selection.$head.parentOffset>0)return!1;let{focusNode:t,focusOffset:n}=e.domSelectionRange();if(t&&t.nodeType==1&&n==0&&t.firstChild&&t.firstChild.contentEditable==`false`){let n=t.firstChild;yZ(e,n,`true`),setTimeout(()=>yZ(e,n,`false`),20)}return!1}function mNe(e){let t=``;return e.ctrlKey&&(t+=`c`),e.metaKey&&(t+=`m`),e.altKey&&(t+=`a`),e.shiftKey&&(t+=`s`),t}function hNe(e,t){let n=t.keyCode,r=mNe(t);if(n==8||uX&&n==72&&r==`c`)return vZ(e,-1)||pZ(e,-1);if(n==46&&!t.shiftKey||uX&&n==68&&r==`c`)return vZ(e,1)||pZ(e,1);if(n==13||n==27)return!0;if(n==37||uX&&n==66&&r==`c`){let t=n==37?gZ(e,e.state.selection.from)==`ltr`?-1:1:-1;return uZ(e,t,r)||pZ(e,t)}else if(n==39||uX&&n==70&&r==`c`){let t=n==39?gZ(e,e.state.selection.from)==`ltr`?1:-1:1;return uZ(e,t,r)||pZ(e,t)}else if(n==38||uX&&n==80&&r==`c`)return _Z(e,-1,r)||pZ(e,-1);else if(n==40||uX&&n==78&&r==`c`)return pNe(e)||_Z(e,1,r)||pZ(e,1);else if(r==(uX?`m`:`c`)&&(n==66||n==73||n==89||n==90))return!0;return!1}function bZ(e,t){e.someProp(`transformCopied`,n=>{t=n(t,e)});let n=[],{content:r,openStart:i,openEnd:a}=t;for(;i>1&&a>1&&r.childCount==1&&r.firstChild.childCount==1;){i--,a--;let e=r.firstChild;n.push(e.type.name,e.attrs==e.type.defaultAttrs?null:e.attrs),r=e.content}let o=e.someProp(`clipboardSerializer`)||Qq.fromSchema(e.state.schema),s=OZ(),c=s.createElement(`div`);c.appendChild(o.serializeFragment(r,{document:s}));let l=c.firstChild,u,d=0;for(;l&&l.nodeType==1&&(u=DZ[l.nodeName.toLowerCase()]);){for(let e=u.length-1;e>=0;e--){let t=s.createElement(u[e]);for(;c.firstChild;)t.appendChild(c.firstChild);c.appendChild(t),d++}l=c.firstChild}return l&&l.nodeType==1&&l.setAttribute(`data-pm-slice`,`${i} ${a}${d?` -${d}`:``} ${JSON.stringify(n)}`),{dom:c,text:e.someProp(`clipboardTextSerializer`,n=>n(t,e))||t.content.textBetween(0,t.content.size,`
+                        `,title:z(`printers:control`)?F(`printers.stop`):F(`printers.permission.noControl`),children:[(0,G.jsx)(yu,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`}),F(`printers.stop`)]})})()]})]})]})})(),(En?.length>0||W.vt_tray.length>0)&&r===`expanded`&&(()=>{let t=En.filter(e=>e.tray.length>1),n=En.filter(e=>e.tray.length===1),r=En.length>0&&W.vt_tray.length>0,g=!(r&&xe),_=e.nozzle_count===2||W?.temperatures?.nozzle_2!==void 0,v=xG[i]??1,y=e=>`${Math.round(e*v*1e3)/1e3}rem`,b=`3.5rem`,x={minWidth:b},S={minWidth:b,maxWidth:y(7.25)},C=e=>({gridTemplateColumns:`repeat(${e}, minmax(${b}, 1fr))`}),w=(W.state===`RUNNING`||W.state===`PAUSE`)&&Array.isArray(W.ams_mapping)?W.ams_mapping:[],T=e=>{let t=Math.max(1,e),n=`calc(${t} * ${b} + ${Math.max(0,t-1)} * 0.25rem + 1rem)`;return{flex:`1 1 ${n}`,minWidth:n}};return(0,G.jsxs)(`div`,{className:`mt-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-2`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] uppercase tracking-wider text-bambu-gray font-medium`,children:F(`printers.filaments`)}),(0,G.jsx)(ske,{state:W.ams_filament_backup,onClick:()=>be(!0)}),(0,G.jsx)(`div`,{className:`flex-1 h-[2px] bg-bambu-dark-tertiary`}),r&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(cke,{hidden:xe,onClick:Ce}),(0,G.jsx)(`div`,{className:`w-3 h-[2px] bg-bambu-dark-tertiary`})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-2`,children:[t.map(t=>{let n=iG(t.id,xn,wn,Cn);return(0,G.jsxs)(`div`,{style:T(4),className:`min-w-0 p-2 bg-bambu-dark rounded-[10px] space-y-1`,children:[(0,G.jsxs)(`div`,{className:`flex w-full min-h-7 items-center justify-between gap-2 rounded-lg bg-bambu-dark-secondary px-2 py-1`,children:[(0,G.jsxs)(`div`,{className:`flex min-w-0 flex-1 items-center gap-1.5`,children:[(0,G.jsx)(yG,{ams:t,printerId:e.id,label:gp(t.id,t.tray.length),amsLabels:pn,canEdit:z(`printers:update`),onSaved:mn,children:(0,G.jsx)(`span`,{className:`block truncate text-[length:var(--pc-t10,10px)] text-white font-medium cursor-default select-none`,children:pn?.[t.id]||gp(t.id,t.tray.length)})}),n?.kind===`inlet`?(0,G.jsx)(rG,{inlet:n.inlet,title:F(`printers.amsSwitchInletTooltip`,{inlet:n.inlet,side:pp[n.inlet]})}):_&&n?.kind===`nozzle`?(0,G.jsx)(nG,{side:n.side}):null]}),(t.humidity!=null||t.temp!=null)&&(0,G.jsxs)(`div`,{className:`flex shrink-0 items-center gap-1.5`,children:[t.humidity!=null&&(0,G.jsx)(lG,{humidity:t.humidity,goodThreshold:a?.humidityGood,fairThreshold:a?.humidityFair,onClick:()=>Nt({amsId:t.id,amsLabel:gp(t.id,t.tray.length),mode:`humidity`}),compact:!0}),t.temp!=null&&(0,G.jsx)(`div`,{className:`mr-1`,children:(0,G.jsx)(uG,{temp:t.temp,goodThreshold:a?.tempGood,fairThreshold:a?.tempFair,onClick:()=>Nt({amsId:t.id,amsLabel:gp(t.id,t.tray.length),mode:`temperature`}),compact:!0})}),(W.supports_drying||W.drying_screen_only)&&(t.module_type===`n3f`||t.module_type===`n3s`)&&z(`printers:control`)&&(0,G.jsx)(`button`,{disabled:W.drying_screen_only||!!(t.dry_sf_reason?.length&&t.dry_time===0),onClick:e=>{t.dry_time>0?sr.mutate(t.id):Ze===t.id?Qe(null):yt(t,e.currentTarget)},className:`ml-1 flex items-center gap-0.5 px-1 py-0.5 rounded text-[length:var(--pc-t9,9px)] transition-colors ${t.dry_time>0?`bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400`:W.drying_screen_only||t.dry_sf_reason?.length?`bg-bambu-dark text-bambu-gray/50 cursor-not-allowed`:`bg-bambu-dark text-bambu-gray hover:text-white hover:bg-bambu-dark/80`}`,title:W.drying_screen_only?F(`printers.drying.screenOnly`):t.dry_time>0?F(`printers.drying.stop`):t.dry_sf_reason?.length?F(XOe(t.dry_sf_reason)):F(`printers.drying.start`),children:(0,G.jsx)(mc,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`})})]})]}),t.dry_time>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 rounded-lg bg-amber-50 dark:bg-amber-500/10 px-2 py-1 text-[length:var(--pc-t9,9px)]`,children:[(0,G.jsx)(mc,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] text-amber-600 dark:text-amber-400 shrink-0`}),(0,G.jsx)(`span`,{className:`text-amber-700 dark:text-amber-400 font-medium`,children:F(`printers.drying.active`)}),t.dry_filament&&(0,G.jsx)(`span`,{className:`text-amber-700/80 dark:text-amber-300/70`,children:t.dry_target_temp==null?t.dry_filament:F(`printers.drying.targetSummary`,{filament:t.dry_filament,temp:t.dry_target_temp})}),(0,G.jsx)(`span`,{className:`text-amber-700/80 dark:text-amber-300/70`,children:F(`printers.drying.timeRemaining`,{time:t.dry_time>=60?`${Math.floor(t.dry_time/60)}h ${t.dry_time%60}m`:`${t.dry_time}m`})}),!W.drying_screen_only&&(0,G.jsx)(`button`,{onClick:()=>sr.mutate(t.id),disabled:sr.isPending,className:`ml-auto text-amber-700 dark:text-amber-400 hover:text-amber-900 dark:hover:text-amber-300 transition-colors disabled:opacity-50`,title:F(`printers.drying.stop`),children:(0,G.jsx)(td,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`})})]}),(0,G.jsx)(`div`,{className:`grid w-full gap-1`,style:C(4),children:[0,1,2,3].map(n=>{let r=t.tray[n]||t.tray.find(e=>e.id===n),i=r?.tray_type&&r.remain>=0,a=!r?.tray_type,g=dG(r),_=t.id*4+n,v=An===_,y=jn!==null&&jn===_,b=Mn!==null&&Mn===_,S=r?.tray_info_idx?cn?.[r.tray_info_idx]:null,C=ln?.[_],T=Hp(C?.preset_id,r?.tray_info_idx)?C?.preset_name:void 0,E=(r?.tray_uuid||r?.tag_uid||Pp(e.serial_number,t.id,n))?.toUpperCase(),D=E?s?.[E]:void 0,O=jp(D),k=o&&!m?p?.find(r=>r.printer_id===e.id&&r.ams_id===t.id&&r.tray_id===n):void 0,A=k?f?.find(e=>e.id===k.spoolman_spool_id):void 0,j=A&&(A.label_weight??0)>0?Math.round(Math.max(0,(A.label_weight??0)-A.weight_used)/(A.label_weight??1)*100):null,M=u?.(e.id,t.id,n),N=(()=>{let e=M?.spool;return e&&e.label_weight>0&&e.weight_used!=null?Math.round(Math.max(0,e.label_weight-e.weight_used)/e.label_weight*100):null})(),P=N===0&&i&&r.remain>0?null:N,I=O??j??P??(i?r.remain:null),L=O!==null||j!==null?`spoolman`:P===null?i?`ams`:void 0:`inventory`,R=r?.tray_type?{vendor:Vp(r)?`Bambu Lab`:`Generic`,profile:T||(A?[A.brand,A.slicer_filament_name?.split(`@`)[0].trim()||A.material].filter(Boolean).join(` `).trim():null)||M?.spool?.slicer_filament_name||S?.name||r.tray_sub_brands||r.tray_type,colorName:Tf(r.tray_color||``,r.tray_sub_brands),colorHex:r.tray_color||null,kFactor:eG(r.k),fillLevel:I,trayUuid:r.tray_uuid||null,tagUid:r.tag_uid||null,fillSource:L}:null,B=Ir?.amsId===t.id&&Ir?.slotId===n,V=w.indexOf(_),ee=V>=0?`P${V+1}`:null,te=(0,G.jsxs)(`div`,{className:`relative w-full bg-bambu-dark-secondary rounded-lg p-1 text-center ${a?`opacity-50`:``} ${y?`ring-2 ring-amber-400 ring-offset-1 ring-offset-bambu-dark animate-pulse`:b?`ring-2 ring-red-500/60 ring-offset-1 ring-offset-bambu-dark`:v?`ring-2 ring-bambu-green ring-offset-1 ring-offset-bambu-dark`:``}`,children:[y&&(0,G.jsx)(`span`,{"aria-label":F(`printers.expectedSlot.ariaLabel`,{n:n+1}),title:F(`printers.expectedSlot.title`),className:`absolute top-0.5 left-0.5 px-1 py-px text-[length:var(--pc-t8,8px)] font-bold text-bambu-dark bg-amber-400 rounded pointer-events-none leading-none`,children:`↓`}),ee&&(0,G.jsx)(`span`,{"aria-label":F(`printers.activeJobSlot.ariaLabel`,{n:V+1}),title:F(`printers.activeJobSlot.title`,{n:V+1}),className:`absolute top-0.5 right-0.5 px-1 py-px text-[length:var(--pc-t8,8px)] font-bold text-bambu-dark bg-bambu-green rounded pointer-events-none leading-none`,children:ee}),(0,G.jsx)(ZW,{trayColor:r?.tray_color,trayType:r?.tray_type,isEmpty:a,emptyKind:g,slotNumber:n+1}),(0,G.jsx)(`div`,{className:`text-[length:var(--pc-t9,9px)] text-white font-bold truncate`,children:r?.tray_type||F(g===`reset`?`ams.slotUnconfigured`:`ams.slotEmpty`)}),(0,G.jsx)(tG,{k:R?r?.k:null,reserve:Dn}),(0,G.jsx)(`div`,{className:`mt-1 h-1.5 bg-black/30 rounded-full overflow-hidden`,children:I!==null&&I>=0&&!a&&r&&(0,G.jsx)(`div`,{className:`h-full rounded-full transition-all`,style:{width:`${I}%`,backgroundColor:Ap(I)}})})]});return(0,G.jsxs)(`div`,{className:`relative group w-full`,style:x,children:[B&&(0,G.jsx)(`div`,{className:`absolute inset-0 bg-bambu-dark-tertiary/80 rounded flex items-center justify-center z-20`,children:(0,G.jsx)(Vl,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] text-bambu-green animate-spin`})}),R?(0,G.jsx)(wU,{data:R,actions:xi({amsId:t.id,slotId:n,loadTrayId:t.id*4+n,isRefreshing:B}),spoolman:{enabled:o,linkedSpoolId:k?.spoolman_spool_id??(E?s?.[E]?.id:void 0),spoolmanUrl:c,syncMode:l,onLinkSpool:o&&!k&&!M?()=>{let r=(R.trayUuid||R.tagUid||Pp(e.serial_number,t.id,n)).toUpperCase();Lt({tagUid:R.tagUid||r,trayUuid:R.trayUuid||``,printerId:e.id,amsId:t.id,trayId:n})}:void 0,onUnlinkSpool:D?.id?()=>rr.mutate(D.id):void 0},inventory:(()=>{if(o){if(m)return;let i=k,a=A;return{assignedSpool:a?{id:a.id,material:a.material,subtype:a.subtype,brand:a.brand??null,color_name:a.color_name??null,color_name_is_synthesized:a.color_name_is_synthesized,rgba:a.rgba??null,extra_colors:a.extra_colors??null,effect_type:a.effect_type??null,remainingWeightGrams:a.label_weight?Math.max(0,Math.round(a.label_weight-a.weight_used)):void 0}:null,onAssignSpool:()=>zt({printerId:e.id,amsId:t.id,trayId:n,trayInfo:{type:r?.tray_type||R.profile,material:r?.tray_type??void 0,profile:R.profile,color:R.colorHex||``,location:`${gp(t.id,t.tray.length)} Slot ${n+1}`}}),onUnassignSpool:a&&!Vp(r)?()=>h?.(a.id):void 0,isAssigned:!!i||Vp(r)}}let i=u?.(e.id,t.id,n);return{assignedSpool:i?.spool?{id:i.spool.id,material:i.spool.material,subtype:i.spool.subtype,brand:i.spool.brand,color_name:i.spool.color_name,rgba:i.spool.rgba??null,extra_colors:i.spool.extra_colors??null,effect_type:i.spool.effect_type??null,remainingWeightGrams:Math.max(0,Math.round(i.spool.label_weight-i.spool.weight_used))}:null,onAssignSpool:()=>zt({printerId:e.id,amsId:t.id,trayId:n,trayInfo:{type:r?.tray_type||R.profile,material:r?.tray_type??void 0,profile:R.profile,color:R.colorHex||``,location:`${gp(t.id,t.tray.length)} Slot ${n+1}`}}),onUnassignSpool:i&&!Vp(r)?()=>d?.(e.id,t.id,n):void 0,isAssigned:!!i||Vp(r)}})(),configureSlot:{enabled:z(`printers:control`),onConfigure:()=>Vt({amsId:t.id,trayId:n,trayCount:t.tray.length,trayType:r?.tray_type||void 0,trayColor:r?.tray_color||void 0,traySubBrands:r?.tray_sub_brands||void 0,trayInfoIdx:r?.tray_info_idx||void 0,extruderId:hp(t.id,r?.id??0,xn,wn),caliIdx:r?.cali_idx,savedPresetId:C?.preset_id})},children:te}):(0,G.jsx)(TU,{kind:g??void 0,actions:xi({amsId:t.id,slotId:n,loadTrayId:t.id*4+n,isRefreshing:B}),configureSlot:{enabled:z(`printers:control`),onConfigure:()=>Vt({amsId:t.id,trayId:n,trayCount:t.tray.length,extruderId:hp(t.id,r?.id??0,xn,wn)})},onAssignSpool:()=>zt({printerId:e.id,amsId:t.id,trayId:n,trayInfo:{type:``,material:void 0,profile:``,color:``,location:`${gp(t.id,t.tray.length)} Slot ${n+1}`}}),children:te})]},n)})})]},t.id)}),n.map(t=>{let n=iG(t.id,xn,wn,Cn),r=t.tray[0],i=r?.tray_type&&r.remain>=0,g=!r?.tray_type,v=dG(r),x=kp(t.id,r?.id??0,!1),C=An===x,T=jn!==null&&jn===x,E=Mn!==null&&Mn===x,D=r?.tray_info_idx?cn?.[r.tray_info_idx]:null,O=ln?.[x],k=Hp(O?.preset_id,r?.tray_info_idx)?O?.preset_name:void 0,A=r?.id??0,j=(r?.tray_uuid||r?.tag_uid||Pp(e.serial_number,t.id,A))?.toUpperCase(),M=j?s?.[j]:void 0,N=jp(M),P=u?.(e.id,t.id,A),I=(()=>{let e=P?.spool;return e&&e.label_weight>0&&e.weight_used!=null?Math.round(Math.max(0,e.label_weight-e.weight_used)/e.label_weight*100):null})(),L=I===0&&i&&r.remain>0?null:I,R=o&&!m?p?.find(n=>n.printer_id===e.id&&n.ams_id===t.id&&n.tray_id===A):void 0,B=R?f?.find(e=>e.id===R.spoolman_spool_id):void 0,V=B&&(B.label_weight??0)>0?Math.round(Math.max(0,(B.label_weight??0)-B.weight_used)/(B.label_weight??1)*100):null,ee=N??V??L??(i?r.remain:null),te=N!==null||V!==null?`spoolman`:L===null?i?`ams`:void 0:`inventory`,ne=r?.tray_type?{vendor:Vp(r)?`Bambu Lab`:`Generic`,profile:k||(B?[B.brand,B.slicer_filament_name?.split(`@`)[0].trim()||B.material].filter(Boolean).join(` `).trim():null)||P?.spool?.slicer_filament_name||D?.name||r.tray_sub_brands||r.tray_type,colorName:Tf(r.tray_color||``,r.tray_sub_brands),colorHex:r.tray_color||null,kFactor:eG(r.k),fillLevel:ee,trayUuid:r.tray_uuid||null,tagUid:r.tag_uid||null,fillSource:te}:null,re=Ir?.amsId===t.id&&Ir?.slotId===A,ie=w.indexOf(x),ae=ie>=0?`P${ie+1}`:null,oe=(0,G.jsxs)(`div`,{className:`relative w-full bg-bambu-dark-secondary rounded-lg p-1 text-center ${g?`opacity-50`:``} ${T?`ring-2 ring-amber-400 ring-offset-1 ring-offset-bambu-dark animate-pulse`:E?`ring-2 ring-red-500/60 ring-offset-1 ring-offset-bambu-dark`:C?`ring-2 ring-bambu-green ring-offset-1 ring-offset-bambu-dark`:``}`,children:[T&&(0,G.jsx)(`span`,{"aria-label":F(`printers.expectedSlot.ariaLabel`,{n:1}),title:F(`printers.expectedSlot.title`),className:`absolute top-0.5 left-0.5 px-1 py-px text-[length:var(--pc-t8,8px)] font-bold text-bambu-dark bg-amber-400 rounded pointer-events-none leading-none`,children:`↓`}),ae&&(0,G.jsx)(`span`,{"aria-label":F(`printers.activeJobSlot.ariaLabel`,{n:ie+1}),title:F(`printers.activeJobSlot.title`,{n:ie+1}),className:`absolute top-0.5 right-0.5 px-1 py-px text-[length:var(--pc-t8,8px)] font-bold text-bambu-dark bg-bambu-green rounded pointer-events-none leading-none`,children:ae}),(0,G.jsx)(ZW,{trayColor:r?.tray_color,trayType:r?.tray_type,isEmpty:g,emptyKind:v,slotNumber:1}),(0,G.jsx)(`div`,{className:`text-[length:var(--pc-t9,9px)] text-white font-bold truncate`,children:r?.tray_type||F(v===`reset`?`ams.slotUnconfigured`:`ams.slotEmpty`)}),(0,G.jsx)(tG,{k:ne?r?.k:null,reserve:Dn}),(0,G.jsx)(`div`,{className:`mt-1 h-1.5 bg-black/30 rounded-full overflow-hidden`,children:ee!==null&&ee>=0&&!g&&(0,G.jsx)(`div`,{className:`h-full rounded-full transition-all`,style:{width:`${ee}%`,backgroundColor:Ap(ee)}})})]}),se=y(11);return(0,G.jsxs)(`div`,{style:{flex:`1 1 ${se}`,minWidth:se,maxWidth:`calc(4 * ${b} + 3 * 0.25rem + 1rem)`},className:`min-w-0 p-2 bg-bambu-dark rounded-[10px] space-y-1`,children:[(0,G.jsxs)(`div`,{className:`flex w-full min-h-7 items-center gap-1.5 rounded-lg bg-bambu-dark-secondary px-2 py-1`,children:[(0,G.jsxs)(`div`,{className:`flex min-w-0 flex-1 items-center gap-1.5`,children:[(0,G.jsx)(yG,{ams:t,printerId:e.id,label:gp(t.id,t.tray.length),amsLabels:pn,canEdit:z(`printers:update`),onSaved:mn,children:(0,G.jsx)(`span`,{className:`block truncate text-[length:var(--pc-t10,10px)] text-white font-medium cursor-default select-none`,children:pn?.[t.id]||gp(t.id,t.tray.length)})}),n?.kind===`inlet`?(0,G.jsx)(rG,{inlet:n.inlet,title:F(`printers.amsSwitchInletTooltip`,{inlet:n.inlet,side:pp[n.inlet]})}):_&&n?.kind===`nozzle`?(0,G.jsx)(nG,{side:n.side}):null]}),(W.supports_drying||W.drying_screen_only)&&(t.module_type===`n3f`||t.module_type===`n3s`)&&z(`printers:control`)&&(0,G.jsx)(`div`,{className:`relative ml-auto`,children:(0,G.jsx)(`button`,{disabled:W.drying_screen_only,onClick:e=>{t.dry_time>0?sr.mutate(t.id):Ze===t.id?Qe(null):yt(t,e.currentTarget)},className:`flex items-center gap-0.5 px-1 py-0.5 rounded text-[length:var(--pc-t9,9px)] transition-colors ${t.dry_time>0?`bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400`:W.drying_screen_only?`bg-bambu-dark text-bambu-gray/50 cursor-not-allowed`:`bg-bambu-dark text-bambu-gray hover:text-white hover:bg-bambu-dark/80`}`,title:W.drying_screen_only?F(`printers.drying.screenOnly`):t.dry_time>0?F(`printers.drying.stop`):F(`printers.drying.start`),children:(0,G.jsx)(mc,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`})})})]}),t.dry_time>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 overflow-hidden whitespace-nowrap rounded-lg bg-amber-50 dark:bg-amber-500/10 px-2 py-1 text-[length:var(--pc-t9,9px)]`,children:[(0,G.jsx)(mc,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] text-amber-600 dark:text-amber-400 shrink-0`}),t.dry_filament&&(0,G.jsx)(`span`,{className:`text-amber-700/80 dark:text-amber-300/70 text-[length:var(--pc-t8,8px)] truncate`,children:t.dry_target_temp==null?t.dry_filament:F(`printers.drying.targetSummary`,{filament:t.dry_filament,temp:t.dry_target_temp})}),(0,G.jsx)(`span`,{className:`text-amber-700/80 dark:text-amber-300/70 text-[length:var(--pc-t8,8px)] truncate`,children:t.dry_time>=60?`${Math.floor(t.dry_time/60)}h ${t.dry_time%60}m`:`${t.dry_time}m`}),!W.drying_screen_only&&(0,G.jsx)(`button`,{onClick:()=>sr.mutate(t.id),disabled:sr.isPending,className:`ml-auto text-amber-700 dark:text-amber-400 hover:text-amber-900 dark:hover:text-amber-300 transition-colors disabled:opacity-50 shrink-0`,title:F(`printers.drying.stop`),children:(0,G.jsx)(td,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)]`})})]}),(0,G.jsxs)(`div`,{className:`flex gap-1.5 max-[550px]:flex-col max-[550px]:items-start`,children:[(0,G.jsxs)(`div`,{className:`relative group flex-1`,style:S,children:[re&&(0,G.jsx)(`div`,{className:`absolute inset-0 bg-bambu-dark-tertiary/80 rounded flex items-center justify-center z-20`,children:(0,G.jsx)(Vl,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] text-bambu-green animate-spin`})}),ne?(0,G.jsx)(wU,{data:ne,actions:xi({amsId:t.id,slotId:A,loadTrayId:t.id*4+A,isRefreshing:re}),spoolman:{enabled:o,linkedSpoolId:R?.spoolman_spool_id??(j?s?.[j]?.id:void 0),spoolmanUrl:c,syncMode:l,onLinkSpool:o&&!R&&!P?()=>{let n=(ne.trayUuid||ne.tagUid||Pp(e.serial_number,t.id,A)).toUpperCase();Lt({tagUid:ne.tagUid||n,trayUuid:ne.trayUuid||``,printerId:e.id,amsId:t.id,trayId:A})}:void 0,onUnlinkSpool:M?.id?()=>rr.mutate(M.id):void 0},inventory:(()=>{if(o){if(m)return;let n=R,i=B;return{assignedSpool:i?{id:i.id,material:i.material,subtype:i.subtype,brand:i.brand??null,color_name:i.color_name??null,color_name_is_synthesized:i.color_name_is_synthesized,rgba:i.rgba??null,extra_colors:i.extra_colors??null,effect_type:i.effect_type??null,remainingWeightGrams:i.label_weight?Math.max(0,Math.round(i.label_weight-i.weight_used)):void 0}:null,onAssignSpool:()=>zt({printerId:e.id,amsId:t.id,trayId:A,trayInfo:{type:r?.tray_type||ne.profile,material:r?.tray_type??void 0,profile:ne.profile,color:ne.colorHex||``,location:gp(t.id,t.tray.length)}}),onUnassignSpool:i&&!Vp(r)?()=>h?.(i.id):void 0,isAssigned:!!n||Vp(r)}}let n=u?.(e.id,t.id,A);return{assignedSpool:n?.spool?{id:n.spool.id,material:n.spool.material,subtype:n.spool.subtype,brand:n.spool.brand,color_name:n.spool.color_name,rgba:n.spool.rgba??null,extra_colors:n.spool.extra_colors??null,effect_type:n.spool.effect_type??null,remainingWeightGrams:Math.max(0,Math.round(n.spool.label_weight-n.spool.weight_used))}:null,onAssignSpool:()=>zt({printerId:e.id,amsId:t.id,trayId:A,trayInfo:{type:r?.tray_type||ne.profile,material:r?.tray_type??void 0,profile:ne.profile,color:ne.colorHex||``,location:gp(t.id,t.tray.length)}}),onUnassignSpool:n&&!Vp(r)?()=>d?.(e.id,t.id,A):void 0,isAssigned:!!n||Vp(r)}})(),configureSlot:{enabled:z(`printers:control`),onConfigure:()=>Vt({amsId:t.id,trayId:A,trayCount:t.tray.length,trayType:r?.tray_type||void 0,trayColor:r?.tray_color||void 0,traySubBrands:r?.tray_sub_brands||void 0,trayInfoIdx:r?.tray_info_idx||void 0,extruderId:hp(t.id,r?.id??0,xn,wn),caliIdx:r?.cali_idx,savedPresetId:O?.preset_id})},children:oe}):(0,G.jsx)(TU,{kind:v??void 0,actions:xi({amsId:t.id,slotId:A,loadTrayId:t.id*4+A,isRefreshing:re}),configureSlot:{enabled:z(`printers:control`),onConfigure:()=>Vt({amsId:t.id,trayId:A,trayCount:t.tray.length,extruderId:hp(t.id,r?.id??0,xn,wn)})},onAssignSpool:()=>zt({printerId:e.id,amsId:t.id,trayId:A,trayInfo:{type:``,material:void 0,profile:``,color:``,location:gp(t.id,t.tray.length)}}),children:oe})]}),(t.humidity!=null||t.temp!=null)&&(0,G.jsxs)(`div`,{className:`flex flex-col justify-center gap-1 shrink-0 max-[550px]:w-full`,children:[t.temp!=null&&(0,G.jsx)(uG,{temp:t.temp,goodThreshold:a?.tempGood,fairThreshold:a?.tempFair,onClick:()=>Nt({amsId:t.id,amsLabel:gp(t.id,t.tray.length),mode:`temperature`}),compact:!0}),t.humidity!=null&&(0,G.jsx)(lG,{humidity:t.humidity,goodThreshold:a?.humidityGood,fairThreshold:a?.humidityFair,onClick:()=>Nt({amsId:t.id,amsLabel:gp(t.id,t.tray.length),mode:`humidity`}),compact:!0})]})]})]},t.id)}),W.vt_tray.length>0&&g&&(0,G.jsxs)(`div`,{style:T(W.vt_tray.length),className:`min-w-0 p-2 bg-bambu-dark rounded-[10px] space-y-1`,children:[(0,G.jsx)(`div`,{className:`flex w-full min-h-7 items-center gap-1.5 rounded-lg bg-bambu-dark-secondary px-2 py-1`,children:(0,G.jsx)(`span`,{className:`block min-w-0 flex-1 truncate text-[length:var(--pc-t10,10px)] text-white font-medium`,children:F(`printers.external`)})}),(0,G.jsx)(`div`,{className:`grid w-full gap-1`,style:C(W.vt_tray.length>1?2:1),children:[...W.vt_tray].sort((e,t)=>(e.id??254)-(t.id??254)).map(t=>{let n=t.id??254,r=_&&An===254?n===254&&W.active_extruder===1||n===255&&W.active_extruder===0:An===n,i=n-254,a=_?F(n===254?`printers.extL`:`printers.extR`):``,g=t.tray_info_idx?cn?.[t.tray_info_idx]:null,v=ln?.[1020+i],y=Hp(v?.preset_id,t.tray_info_idx)?v?.preset_name:void 0,b=(t.tray_uuid||t.tag_uid||Pp(e.serial_number,255,i))?.toUpperCase(),S=b?s?.[b]:void 0,C=jp(S),w=u?.(e.id,255,i),T=(()=>{let e=w?.spool;return e&&e.label_weight>0&&e.weight_used!=null?Math.round(Math.max(0,e.label_weight-e.weight_used)/e.label_weight*100):null})(),E=t.tray_type&&t.remain>=0,D=T===0&&E&&t.remain>0?null:T,O=o&&!m?p?.find(t=>t.printer_id===e.id&&t.ams_id===255&&t.tray_id===i):void 0,k=O?f?.find(e=>e.id===O.spoolman_spool_id):void 0,A=k&&(k.label_weight??0)>0?Math.round(Math.max(0,(k.label_weight??0)-k.weight_used)/(k.label_weight??1)*100):null,j=C??A??D??(E?t.remain:null),M=C!==null||A!==null?`spoolman`:D===null?E?`ams`:void 0:`inventory`,N={vendor:Vp(t)?`Bambu Lab`:`Generic`,profile:y||(k?[k.brand,k.slicer_filament_name?.split(`@`)[0].trim()||k.material].filter(Boolean).join(` `).trim():null)||w?.spool?.slicer_filament_name||g?.name||t.tray_sub_brands||t.tray_type||`Unknown`,colorName:Tf(t.tray_color||``,t.tray_sub_brands),colorHex:t.tray_color||null,kFactor:eG(t.k),fillLevel:j,trayUuid:t.tray_uuid||null,tagUid:t.tag_uid||null,fillSource:M},P=!t.tray_type,I=dG(t),L=(0,G.jsxs)(`div`,{className:`w-full bg-bambu-dark-secondary rounded-lg p-1 text-center ${P?`opacity-50`:``} ${r?`ring-2 ring-bambu-green ring-offset-1 ring-offset-bambu-dark`:``}`,children:[(0,G.jsx)(ZW,{trayColor:t.tray_color,trayType:t.tray_type,isEmpty:P,emptyKind:I,slotNumber:_?n===254?`L`:`R`:i+1}),(0,G.jsx)(`div`,{className:`text-[length:var(--pc-t9,9px)] font-bold truncate ${P?`text-white/40`:`text-white`}`,children:t.tray_type||F(`ams.slotEmpty`)}),(0,G.jsx)(tG,{k:P?null:t.k,reserve:Dn}),(0,G.jsx)(`div`,{className:`mt-1 h-1.5 bg-black/30 rounded-full overflow-hidden`,children:j!==null&&j>=0&&!P&&(0,G.jsx)(`div`,{className:`h-full rounded-full transition-all`,style:{width:`${j}%`,backgroundColor:Ap(j)}})})]});return(0,G.jsx)(`div`,{className:`relative group w-full`,style:x,children:P?(0,G.jsx)(TU,{kind:I??void 0,actions:xi({amsId:255,slotId:i,loadTrayId:n,includeRfid:!1}),configureSlot:{enabled:z(`printers:control`),onConfigure:()=>Vt({amsId:255,trayId:i,trayCount:1,extruderId:_?+(n===254):void 0})},onAssignSpool:()=>zt({printerId:e.id,amsId:255,trayId:i,trayInfo:{type:``,material:void 0,profile:``,color:``,location:`External Slot ${i+1}`}}),children:L}):(0,G.jsx)(wU,{data:N,actions:xi({amsId:255,slotId:i,loadTrayId:n,includeRfid:!1}),spoolman:{enabled:o,linkedSpoolId:O?.spoolman_spool_id??(b?s?.[b]?.id:void 0),spoolmanUrl:c,syncMode:l,onLinkSpool:o&&!O&&!w?()=>{let t=(N.trayUuid||N.tagUid||Pp(e.serial_number,255,i)).toUpperCase();Lt({tagUid:N.tagUid||t,trayUuid:N.trayUuid||``,printerId:e.id,amsId:255,trayId:i})}:void 0,onUnlinkSpool:S?.id?()=>rr.mutate(S.id):void 0},inventory:(()=>{if(o){if(m)return;let n=O,r=k;return{assignedSpool:r?{id:r.id,material:r.material,subtype:r.subtype,brand:r.brand??null,color_name:r.color_name??null,color_name_is_synthesized:r.color_name_is_synthesized,rgba:r.rgba??null,extra_colors:r.extra_colors??null,effect_type:r.effect_type??null,remainingWeightGrams:r.label_weight?Math.max(0,Math.round(r.label_weight-r.weight_used)):void 0}:null,onAssignSpool:()=>zt({printerId:e.id,amsId:255,trayId:i,trayInfo:{type:t.tray_type||N.profile,material:t.tray_type??void 0,profile:N.profile,color:N.colorHex||``,location:a||F(`printers.external`)}}),onUnassignSpool:r&&!Vp(t)?()=>h?.(r.id):void 0,isAssigned:!!n||Vp(t)}}let n=u?.(e.id,255,i);return{assignedSpool:n?.spool?{id:n.spool.id,material:n.spool.material,subtype:n.spool.subtype,brand:n.spool.brand,color_name:n.spool.color_name,rgba:n.spool.rgba??null,extra_colors:n.spool.extra_colors??null,effect_type:n.spool.effect_type??null,remainingWeightGrams:Math.max(0,Math.round(n.spool.label_weight-n.spool.weight_used))}:null,onAssignSpool:()=>zt({printerId:e.id,amsId:255,trayId:i,trayInfo:{type:t.tray_type||N.profile,material:t.tray_type??void 0,profile:N.profile,color:N.colorHex||``,location:a||F(`printers.external`)}}),onUnassignSpool:n&&!Vp(t)?()=>d?.(e.id,255,i):void 0,isAssigned:!!n||Vp(t)}})(),configureSlot:{enabled:z(`printers:control`),onConfigure:()=>Vt({amsId:255,trayId:i,trayCount:1,trayType:t.tray_type||void 0,trayColor:t.tray_color||void 0,traySubBrands:t.tray_sub_brands||void 0,trayInfoIdx:t.tray_info_idx||void 0,extruderId:_?+(n===254):void 0,caliIdx:t.cali_idx,savedPresetId:v?.preset_id})},children:L})},n)})})]})]})]})})()]}),e.is_active!==!1&&!W?.connected&&r===`expanded`&&qn&&gr,r===`expanded`&&(0,G.jsxs)(`div`,{className:`mt-auto`,children:[Fn&&(0,G.jsxs)(`div`,{className:`pt-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-2`,children:[(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] uppercase tracking-wider text-bambu-gray font-medium`,children:F(`printers.power`,`Power`)}),(0,G.jsx)(`div`,{className:`flex-1 h-[2px] bg-bambu-dark-tertiary`})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 rounded-[10px] bg-bambu-dark p-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 min-w-0 pl-1`,children:[(0,G.jsx)(rd,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] text-bambu-gray flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm text-white truncate`,children:Fn.name}),(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 rounded-full bg-bambu-dark-tertiary text-bambu-gray text-[length:var(--pc-t10,10px)] font-medium flex-shrink-0`,title:F(`smartPlugs.power`),children:Ln?.energy?.power!==null&&Ln?.energy?.power!==void 0?`${Math.round(Ln.energy.power)}W`:`--`})]}),(0,G.jsx)(`div`,{className:`flex-1`}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`button`,{onClick:()=>ur.mutate(!Fn.auto_off),disabled:ur.isPending||Fn.auto_off_executed||!z(`smart_plugs:control`),title:z(`smart_plugs:control`)?Fn.auto_off_executed?F(`printers.autoOffExecuted`):F(`printers.autoOffAfterPrint`):F(`printers.permission.noSmartPlugControl`),className:`flex h-8 w-8 flex-shrink-0 items-center justify-center rounded-lg text-xs font-bold transition-colors disabled:opacity-50 disabled:cursor-not-allowed ${z(`smart_plugs:control`)?Fn.auto_off||Fn.auto_off_executed?`bg-bambu-green/20 text-bambu-green hover:bg-bambu-green/30`:`bg-bambu-dark-tertiary text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary/80`:`bg-bambu-dark-tertiary/50 text-bambu-gray/50`}`,children:(0,G.jsx)(js,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(`button`,{onClick:()=>{Ln?.state===`ON`?fe(!0):ue(!0)},disabled:lr.isPending||!z(`smart_plugs:control`),className:`flex h-8 w-8 flex-shrink-0 items-center justify-center rounded-lg text-xs transition-colors disabled:opacity-50 disabled:cursor-not-allowed ${z(`smart_plugs:control`)?Ln?.state===`ON`?`bg-bambu-green/20 text-bambu-green hover:bg-bambu-green/30`:`bg-bambu-dark-tertiary text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary/80`:`bg-bambu-dark-tertiary/50 text-bambu-gray/50`}`,title:z(`smart_plugs:control`)?Ln?.state===`ON`?`Turn off`:`Turn on`:F(`printers.permission.noSmartPlugControl`),children:(0,G.jsx)(rd,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})})]})]}),In&&In.length>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mt-2`,children:[(0,G.jsx)(zc,{className:`w-[var(--pc-i35,0.875rem)] h-[var(--pc-i35,0.875rem)] text-blue-600 dark:text-blue-400 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`HA:`}),(0,G.jsx)(`div`,{className:`h-[2px] w-5 bg-bambu-dark-tertiary/50`}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1`,children:In.map(e=>{let t=e.ha_entity_id?.startsWith(`script.`);return(0,G.jsxs)(`button`,{onClick:()=>{t?dr.mutate({id:e.id,action:`on`}):me(e)},disabled:dr.isPending,title:`${t?`Run`:`Toggle`} ${e.ha_entity_id}`,className:`px-2 py-0.5 text-xs bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400 hover:bg-blue-500/30 rounded transition-colors flex items-center gap-1`,children:[(0,G.jsx)(Ml,{className:`w-[var(--pc-i25,0.625rem)] h-[var(--pc-i25,0.625rem)]`}),e.name]},e.id)})})]})]}),(0,G.jsx)(ece,{printerId:e.id}),(0,G.jsxs)(`div`,{className:`pt-4`,children:[(0,G.jsx)(`div`,{className:`mb-3 h-[2px] bg-bambu-dark-tertiary`}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2`,children:[Si,(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-2 flex-wrap`,children:[(0,G.jsxs)(`div`,{className:`flex items-center flex-shrink-0`,children:[(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>yi(_),disabled:!W?.connected||!z(`camera:view`),title:z(`camera:view`)?F(_===`embedded`?`printers.openCameraOverlay`:`printers.openCameraWindow`):F(`printers.permission.noCamera`),className:`${vi} !rounded-r-none`,children:(0,G.jsx)(Wu,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:e=>{let t=e.currentTarget.getBoundingClientRect();At({x:t.left,y:t.bottom+4})},disabled:!W?.connected||!z(`camera:view`),title:z(`camera:view`)?F(`settings.cameraViewMode`):F(`printers.permission.noCamera`),"aria-label":F(`settings.cameraViewMode`),className:`!h-8 !min-h-8 !w-6 !px-0 !py-0 !rounded-l-none border-l border-bambu-dark`,children:(0,G.jsx)(ps,{className:`w-3 h-3`})})]}),kt&&(0,G.jsx)(FT,{x:kt.x,y:kt.y,items:bi,onClose:()=>At(null)}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>se(!0),disabled:!z(`printers:files`),title:z(`printers:files`)?F(`printers.browseFiles`):F(`printers.permission.noFiles`),className:vi,children:(0,G.jsx)(Nc,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`})}),(0,G.jsxs)(Q,{size:`sm`,onClick:()=>Ue(!0),disabled:!z(`library:upload`)||!z(`queue:create`),title:z(`library:upload`)?z(`queue:create`)?F(`common.print`):F(`fileManager.noPermissionAddToQueue`):F(`fileManager.noPermissionUpload`),className:`!h-8 !min-h-8 !px-2 !py-0 !bg-bambu-green hover:!bg-bambu-green/80 !text-white`,children:[(0,G.jsx)(Ll,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)]`}),F(`common.print`)]})]})]})]})]}),(0,G.jsx)(vke,{printerId:e.id,dryingActive:En.some(e=>(e.dry_time??0)>0),timeFormat:g})]}),oe&&(0,G.jsx)(Fse,{printerId:e.id,printerName:e.name,onClose:()=>se(!1)}),He&&(0,G.jsx)(yW,{folderId:null,onClose:()=>Ue(!1),onUploadComplete:()=>{},autoUpload:!0,accept:`.gcode,.3mf`,validateFile:e=>{let t=e.name.toLowerCase();if(!t.endsWith(`.gcode`)&&!t.includes(`.gcode.`))return F(`printers.dropNotPrintable`,`Only .gcode and .gcode.3mf files can be printed`)},onFileUploaded:t=>{let n=t.metadata?.sliced_for_model,r=vG(e.model);if(n&&r&&n.toLowerCase()!==r.toLowerCase())return Z.deleteLibraryFile(t.id).catch(()=>{}),F(`printers.incompatibleFile`,`This file was sliced for {{slicedFor}}, but this printer is a {{printerModel}}`,{slicedFor:n,printerModel:r});Xe({id:t.id,filename:t.filename})}}),Ye&&(0,G.jsx)(qW,{mode:`create`,libraryFileId:Ye.id,archiveName:Ye.filename,initialSelectedPrinterIds:[e.id],onClose:()=>Xe(null),onSuccess:()=>Xe(null),cleanupLibraryAfterDispatch:!0}),H&&(0,G.jsx)(Xse,{printerId:e.id,printerName:e.name,onClose:()=>ce(!1)}),Ke&&(0,G.jsx)(Wp,{printerId:e.id,printerName:e.name,onClose:()=>qe(!1)}),We&&(0,G.jsx)(HOe,{printer:e,status:W,totalPrintHours:n?.total_print_hours,onClose:Je}),Wt&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,onClick:()=>ti(),children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-2xl max-w-lg w-full`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[Wt.needs_calibration?(0,G.jsx)(Yl,{className:`w-[var(--pc-i5,1.25rem)] h-[var(--pc-i5,1.25rem)] text-blue-500`}):Wt.is_empty?(0,G.jsx)(xs,{className:`w-[var(--pc-i5,1.25rem)] h-[var(--pc-i5,1.25rem)] text-green-500`}):(0,G.jsx)(Ds,{className:`w-[var(--pc-i5,1.25rem)] h-[var(--pc-i5,1.25rem)] text-yellow-500`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:`Build Plate Check`}),Wt.reference_count!==void 0&&Wt.max_references&&(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray bg-bambu-dark-tertiary px-2 py-1 rounded`,children:[Wt.reference_count,`/`,Wt.max_references,` refs`]})]}),(0,G.jsx)(`button`,{onClick:()=>ti(),className:`p-1 text-bambu-gray hover:text-white rounded transition-colors`,children:(0,G.jsx)(td,{className:`w-[var(--pc-i5,1.25rem)] h-[var(--pc-i5,1.25rem)]`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-4`,children:[Wt.needs_calibration?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`p-3 rounded-lg bg-blue-100 dark:bg-blue-500/20 border border-blue-300 dark:border-blue-500/50`,children:[(0,G.jsx)(`p`,{className:`font-medium text-blue-700 dark:text-blue-400`,children:F(`printers.plateDetection.calibrationRequired`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,dangerouslySetInnerHTML:{__html:F(`printers.plateDetection.calibrationInstructions`)}})]}),(0,G.jsxs)(`div`,{className:`text-sm text-bambu-gray space-y-2`,children:[(0,G.jsx)(`p`,{children:F(`printers.plateDetection.calibrationDescription`)}),(0,G.jsx)(`p`,{dangerouslySetInnerHTML:{__html:F(`printers.plateDetection.calibrationTip`)}})]})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`p-3 rounded-lg ${Wt.is_empty?`bg-green-100 dark:bg-green-500/20 border border-green-300 dark:border-green-500/50`:`bg-yellow-100 dark:bg-yellow-500/20 border border-yellow-300 dark:border-yellow-500/50`}`,children:[(0,G.jsx)(`p`,{className:`font-medium ${Wt.is_empty?`text-green-700 dark:text-green-400`:`text-yellow-700 dark:text-yellow-400`}`,children:Wt.is_empty?F(`printers.plateDetection.plateEmpty`):F(`printers.plateDetection.objectsDetected`)}),(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:[F(`printers.plateDetection.confidence`),`: `,Math.round(Wt.confidence*100),`% | `,F(`printers.plateDetection.difference`),`: `,Wt.difference_percent.toFixed(1),`%`]})]}),Wt.debug_image_url&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-2`,children:F(`printers.plateDetection.analysisPreview`)}),(0,G.jsx)(`img`,{src:Wt.debug_image_url,alt:F(`printers.plateDetection.analysisPreview`),className:`w-full rounded-lg border border-bambu-dark-tertiary`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-2`,children:F(`printers.plateDetection.analysisLegend`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:Wt.message})]}),Jr&&Jr.references.length>0&&(0,G.jsxs)(`div`,{className:`mt-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-2`,children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white shrink-0`,children:F(`printers.plateDetection.savedReferences`,{count:Jr.references.length,max:Jr.max_references})}),(0,G.jsx)(`div`,{className:`flex-1 h-[2px] bg-bambu-dark-tertiary`})]}),(0,G.jsx)(`div`,{className:`grid grid-cols-5 gap-2`,children:Jr.references.map(t=>(0,G.jsxs)(`div`,{className:`relative group`,children:[(0,G.jsx)(`img`,{src:Z.getPlateReferenceThumbnailUrl(e.id,t.index),alt:t.label||`Reference ${t.index+1}`,className:`w-full aspect-video object-cover rounded border border-bambu-dark-tertiary`}),(0,G.jsx)(`button`,{onClick:()=>ii(t.index),className:`absolute top-1 right-1 p-0.5 bg-red-500/80 rounded can-hover:opacity-0 group-hover:opacity-100 focus-visible:opacity-100 transition-opacity`,title:F(`printers.plateDetection.deleteReference`),children:(0,G.jsx)(td,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] text-white`})}),Xr?.index===t.index?(0,G.jsx)(`input`,{type:`text`,value:Xr.label,onChange:e=>Zr({...Xr,label:e.target.value}),onBlur:()=>ri(t.index,Xr.label),onKeyDown:e=>{e.key===`Enter`&&ri(t.index,Xr.label),e.key===`Escape`&&Zr(null)},className:`w-full mt-1 px-1 py-0.5 text-xs bg-bambu-dark-tertiary border border-bambu-green rounded text-white`,autoFocus:!0,placeholder:F(`printers.plateDetection.labelPlaceholder`)}):(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1 truncate cursor-pointer hover:text-white`,onClick:()=>Zr({index:t.index,label:t.label}),title:t.label?F(`printers.plateDetection.clickToEdit`,{label:t.label}):F(`printers.plateDetection.clickToAddLabel`),children:t.label||(0,G.jsx)(`span`,{className:`italic opacity-50`,children:F(`printers.noLabel`)})}),(0,G.jsx)(`p`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray/60`,children:t.timestamp?ep(t.timestamp)?.toLocaleDateString()??``:``})]},t.index))})]}),!Wt.needs_calibration&&(0,G.jsxs)(`div`,{className:`mt-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsxs)(`div`,{className:`flex min-w-0 flex-1 items-center gap-2`,children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white shrink-0`,children:F(`printers.roi.title`)}),(0,G.jsx)(`div`,{className:`flex-1 h-[2px] bg-bambu-dark-tertiary`})]}),Xt?(0,G.jsxs)(`div`,{className:`flex gap-1`,children:[(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>Zt(null),disabled:Qt,children:F(`common.cancel`)}),(0,G.jsx)(Q,{size:`sm`,onClick:ai,disabled:Qt,children:Qt?(0,G.jsx)(Y,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] animate-spin`}):F(`common.save`)})]}):(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:()=>Zt(Wt.roi||{x:.15,y:.35,w:.7,h:.55}),children:[(0,G.jsx)(kl,{className:`w-[var(--pc-i3,0.75rem)] h-[var(--pc-i3,0.75rem)] mr-1`}),F(`common.edit`)]})]}),Xt?(0,G.jsxs)(`div`,{className:`space-y-3 bg-bambu-dark-tertiary/50 p-3 rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray`,children:F(`printers.roi.xStart`)}),(0,G.jsx)(`input`,{type:`range`,min:`0`,max:`0.9`,step:`0.01`,value:Xt.x,onChange:e=>Zt({...Xt,x:parseFloat(e.target.value)}),className:`w-full h-1.5 bg-bambu-dark-tertiary rounded-lg cursor-pointer accent-green-500`}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[Math.round(Xt.x*100),`%`]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray`,children:F(`printers.roi.yStart`)}),(0,G.jsx)(`input`,{type:`range`,min:`0`,max:`0.9`,step:`0.01`,value:Xt.y,onChange:e=>Zt({...Xt,y:parseFloat(e.target.value)}),className:`w-full h-1.5 bg-bambu-dark-tertiary rounded-lg cursor-pointer accent-green-500`}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[Math.round(Xt.y*100),`%`]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray`,children:F(`printers.width`)}),(0,G.jsx)(`input`,{type:`range`,min:`0.1`,max:`1`,step:`0.01`,value:Xt.w,onChange:e=>Zt({...Xt,w:parseFloat(e.target.value)}),className:`w-full h-1.5 bg-bambu-dark-tertiary rounded-lg cursor-pointer accent-green-500`}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[Math.round(Xt.w*100),`%`]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray`,children:F(`printers.height`)}),(0,G.jsx)(`input`,{type:`range`,min:`0.1`,max:`1`,step:`0.01`,value:Xt.h,onChange:e=>Zt({...Xt,h:parseFloat(e.target.value)}),className:`w-full h-1.5 bg-bambu-dark-tertiary rounded-lg cursor-pointer accent-green-500`}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[Math.round(Xt.h*100),`%`]})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:F(`printers.roi.instruction`)})]}):(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[`Current: X=`,Math.round((Wt.roi?.x||.15)*100),`%, Y=`,Math.round((Wt.roi?.y||.35)*100),`%, W=`,Math.round((Wt.roi?.w||.7)*100),`%, H=`,Math.round((Wt.roi?.h||.55)*100),`%`]})]})]}),(0,G.jsx)(`div`,{className:`flex justify-end gap-2 p-4`,children:Wt.needs_calibration?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Q,{variant:`ghost`,onClick:()=>ti(),children:F(`common.cancel`)}),(0,G.jsx)(Q,{onClick:()=>ni(),disabled:Jt,children:Jt?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-[var(--pc-i4,1rem)] h-[var(--pc-i4,1rem)] mr-2 animate-spin`}),`Calibrating...`]}):`Calibrate Empty Plate`})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Q,{variant:`ghost`,onClick:()=>ni(),disabled:Jt,children:Jt?`Adding...`:`Add Reference (${Jr?.references.length||0}/${Jr?.max_references||5})`}),(0,G.jsx)(Q,{onClick:()=>ti(),children:`Close`})]})})]})}),le&&Fn&&(0,G.jsx)(rf,{title:F(`printers.confirm.powerOnTitle`),message:F(`printers.confirm.powerOnMessage`,{name:e.name}),confirmText:F(`printers.confirm.powerOnButton`),variant:`default`,onConfirm:()=>{lr.mutate(`on`),ue(!1)},onCancel:()=>ue(!1)}),jr&&(0,G.jsx)(rf,{title:F(`printers.maintenance.confirmMidPrintTitle`),message:F(`printers.maintenance.confirmMidPrintMessage`,{name:e.name}),confirmText:F(`printers.maintenance.menuEnter`),variant:`danger`,onConfirm:()=>{Ar.mutate(!1),Mr(!1)},onCancel:()=>Mr(!1)}),de&&Fn&&(0,G.jsx)(rf,{title:F(`printers.confirm.powerOffTitle`),message:W?.state===`RUNNING`?F(`printers.confirm.powerOffWarning`,{name:e.name}):F(`printers.confirm.powerOffMessage`,{name:e.name}),confirmText:F(`printers.confirm.powerOffButton`),variant:`danger`,onConfirm:()=>{lr.mutate(`off`),fe(!1)},onCancel:()=>fe(!1)}),pe&&(0,G.jsx)(rf,{title:F(`printers.confirm.haToggleTitle`,{name:pe.name}),message:W?.state===`RUNNING`?F(`printers.confirm.haToggleWarning`,{name:e.name,entity:pe.ha_entity_id||pe.name}):F(`printers.confirm.haToggleMessage`,{entity:pe.ha_entity_id||pe.name}),confirmText:F(`printers.confirm.haToggleButton`),variant:W?.state===`RUNNING`?`danger`:`default`,onConfirm:()=>{dr.mutate({id:pe.id,action:`toggle`}),me(null)},onCancel:()=>me(null)}),we&&(0,G.jsx)(rf,{title:F(`printers.confirm.stopTitle`),message:F(`printers.confirm.stopMessage`,{name:e.name}),confirmText:F(`printers.confirm.stopButton`),variant:`danger`,onConfirm:()=>{fr.mutate(),Te(!1)},onCancel:()=>Te(!1)}),Ee&&(0,G.jsx)(rf,{title:F(`printers.confirm.pauseTitle`),message:F(`printers.confirm.pauseMessage`,{name:e.name}),confirmText:F(`printers.confirm.pauseButton`),variant:`default`,onConfirm:()=>{pr.mutate(),De(!1)},onCancel:()=>De(!1)}),Re&&(0,G.jsx)(rf,{title:F(`printers.confirm.resumeTitle`),message:F(`printers.confirm.resumeMessage`,{name:e.name}),confirmText:F(`printers.confirm.resumeButton`),variant:`default`,onConfirm:()=>{mr.mutate(),ze(!1)},onCancel:()=>ze(!1)}),(0,G.jsx)(ET,{printerId:e.id,isOpen:Be,onClose:()=>Ve(!1)}),he&&(0,G.jsx)(Uee,{printerName:e.name,errors:W?.hms_errors||[],onClose:()=>ge(!1),printerId:e.id,hasPermission:z,runoutGuidance:Pn}),_e&&(0,G.jsx)(Qse,{printerName:e.name,detection:N,lastError:P,onClose:()=>ve(!1)}),ye&&W&&(0,G.jsx)(WDe,{isOpen:ye,state:W.ams_filament_backup,amsUnits:W.ams,amsExtruderMap:W.ams_extruder_map,isDualNozzle:e.nozzle_count===2||W?.temperatures?.nozzle_2!==void 0,canToggle:z(`printers:control`),pending:cr.isPending,onToggle:e=>cr.mutate(e),onClose:()=>be(!1)}),Mt&&(0,G.jsx)(BDe,{isOpen:!!Mt,onClose:()=>Nt(null),printerId:e.id,printerName:e.name,amsId:Mt.amsId,amsLabel:Mt.amsLabel,initialMode:Mt.mode,thresholds:a}),Pt&&(0,G.jsx)(KDe,{isOpen:!!Pt,onClose:()=>Ft(null),printerId:e.id,printerName:e.name,initialKind:Pt.initialKind,availableKinds:Pt.availableKinds}),It&&(0,G.jsx)(EU,{isOpen:!!It,onClose:()=>Lt(null),tagUid:It.tagUid,trayUuid:It.trayUuid,printerId:It.printerId,amsId:It.amsId,trayId:It.trayId}),Rt&&(0,G.jsx)(OU,{isOpen:!!Rt,onClose:()=>zt(null),printerId:Rt.printerId,amsId:Rt.amsId,trayId:Rt.trayId,trayInfo:Rt.trayInfo,spoolmanEnabled:!!o}),Bt&&(0,G.jsx)(_W,{isOpen:!!Bt,onClose:()=>Vt(null),printerId:e.id,slotInfo:Bt,printerModel:vG(e.model)||void 0,nozzleDiameter:aee(W,Bt.amsId),onSuccess:()=>{I.invalidateQueries({queryKey:[`slotPresets`,e.id]}),I.invalidateQueries({queryKey:[`printerStatus`,e.id]})}}),Wr&&(0,G.jsx)(UOe,{slotLabel:Wr.slotLabel,amsId:Wr.amsId,slotId:Wr.slotId,extruderSlots:W?.extruder_slots??{},isLoading:Hr.isPending,onConfirm:e=>Hr.mutate({trayId:Wr.trayId,extruderId:e}),onCancel:()=>Gr(null)}),ie&&(0,G.jsx)(xke,{printer:e,onClose:()=>ae(!1)}),Ht&&nn&&(0,G.jsx)(bke,{printer:e,firmwareInfo:nn,onClose:()=>Ut(!1)}),Ze!==null&&ht&&(()=>{let e=$e===`n3s`?85:65,t=e+10;return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-[100]`,"data-testid":`drying-popover-backdrop`,onMouseDown:()=>{xt.current=bt.current!==null&&document.activeElement===bt.current},onClick:()=>{if(xt.current){xt.current=!1;return}Qe(null)}}),(0,G.jsxs)(`div`,{className:`fixed z-[101] flex flex-col w-[240px] bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-2xl overflow-hidden`,style:{left:ht.left,...ht.placement===`above`?{bottom:`calc(100dvh - ${ht.anchorY}px)`,maxHeight:`${ht.anchorY-8}px`}:{top:ht.top,maxHeight:`calc(100dvh - ${ht.top}px - 8px)`}},onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`shrink-0 flex items-center justify-center gap-2 px-3 py-2.5`,children:[(0,G.jsx)(mc,{className:`w-[var(--pc-i35,0.875rem)] h-[var(--pc-i35,0.875rem)] text-bambu-green`}),(0,G.jsx)(`span`,{className:`text-sm text-white font-medium text-center`,children:F(`printers.drying.start`)})]}),(0,G.jsx)(`div`,{className:`shrink-0 h-px bg-bambu-dark-tertiary`}),(0,G.jsxs)(`div`,{className:`px-3 py-2.5 space-y-2.5 overflow-y-auto min-h-0`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-[length:var(--pc-t10,10px)] text-white/70 font-medium mb-1 block`,children:F(`printers.filaments`)}),(0,G.jsx)(fG,{value:tt,options:Object.keys(S).map(e=>({value:e,label:e})),onChange:e=>{nt(e);let t=S[e];t&&(it(t[$e===`n3s`?`n3s`:`n3f`]),ot($e===`n3s`?t.n3s_hours:t.n3f_hours))},fullWidth:!0})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-1`,children:[(0,G.jsx)(`label`,{className:`text-[length:var(--pc-t10,10px)] text-white/70 font-medium`,children:F(`printers.drying.temperature`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`input`,{type:`number`,min:45,max:e,value:rt,onChange:t=>it(Math.min(e,Math.max(45,Number(t.target.value)||45))),className:`w-12 px-1 py-0.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-[length:var(--pc-t11,11px)] text-center focus:outline-none focus:border-bambu-green [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none`}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray`,children:`°C`})]})]}),(0,G.jsx)(`input`,{type:`range`,min:35,max:t,value:rt,onChange:t=>it(Math.min(e,Math.max(45,Number(t.target.value)))),className:`w-full h-1 accent-bambu-green cursor-pointer`}),(0,G.jsxs)(`div`,{className:`flex justify-between text-[length:var(--pc-t9,9px)] text-bambu-gray/50 mt-0.5`,children:[(0,G.jsx)(`span`,{children:`45°C`}),(0,G.jsxs)(`span`,{children:[e,`°C`]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-1`,children:[(0,G.jsx)(`label`,{className:`text-[length:var(--pc-t10,10px)] text-white/70 font-medium`,children:F(`printers.drying.duration`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`input`,{type:`number`,min:1,max:24,value:at,onChange:e=>ot(Math.min(24,Math.max(1,Number(e.target.value)||1))),className:`w-10 px-1 py-0.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-[length:var(--pc-t11,11px)] text-center focus:outline-none focus:border-bambu-green [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none`}),(0,G.jsx)(`span`,{className:`text-[length:var(--pc-t10,10px)] text-bambu-gray`,children:F(`printers.drying.hours`)})]})]}),(0,G.jsx)(`input`,{type:`range`,min:1,max:24,value:at,onChange:e=>ot(Number(e.target.value)),className:`w-full h-1 accent-bambu-green cursor-pointer`}),(0,G.jsxs)(`div`,{className:`flex justify-between text-[length:var(--pc-t9,9px)] text-bambu-gray/50 mt-0.5`,children:[(0,G.jsx)(`span`,{children:`1h`}),(0,G.jsx)(`span`,{children:`24h`})]})]}),(()=>{let e=((Ze===null?void 0:En.find(e=>e.id===Ze))?.tray??[]).some(e=>e.state===11),t=st&&!e;return(0,G.jsx)(`button`,{type:`button`,onClick:()=>ct(e=>!e),"aria-pressed":t,disabled:e,title:e?F(`printers.drying.rotateUnavailableReason`):void 0,className:`h-8 w-full rounded-lg border px-2 text-sm font-medium transition-colors disabled:cursor-not-allowed disabled:opacity-50 ${t?`bg-bambu-green border-bambu-green text-white`:`bg-bambu-dark border-bambu-dark-tertiary text-white hover:bg-bambu-dark-tertiary disabled:hover:bg-bambu-dark`}`,children:F(`printers.drying.rotateTray`)})})(),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-[10px] text-white/70 font-medium mb-1 block`,children:F(`printers.drying.startMode`)}),(0,G.jsx)(`div`,{className:`grid grid-cols-3 gap-1`,children:[`now`,`delay`,`at_time`].map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>ut(e),className:`py-1 rounded-lg border text-[10px] font-medium transition-colors ${lt===e?`bg-bambu-green border-bambu-green text-white`:`bg-bambu-dark border-bambu-dark-tertiary text-white hover:bg-bambu-dark-tertiary`}`,children:F(e===`now`?`printers.drying.modeNow`:e===`delay`?`printers.drying.modeDelay`:`printers.drying.modeAtTime`)},e))}),lt===`delay`&&(0,G.jsx)(`div`,{className:`mt-1.5 grid grid-cols-4 gap-1`,children:qOe.map(e=>(0,G.jsx)(`button`,{type:`button`,"aria-pressed":dt===e,onClick:()=>ft(e),className:`py-1 rounded-lg border text-[10px] font-medium transition-colors ${dt===e?`bg-bambu-green border-bambu-green text-white`:`bg-bambu-dark border-bambu-dark-tertiary text-white hover:bg-bambu-dark-tertiary`}`,children:lp(e/60)},e))}),lt===`at_time`&&(0,G.jsx)(`input`,{ref:bt,type:`datetime-local`,"data-testid":`drying-start-at`,value:pt,onChange:e=>mt(e.target.value),className:`mt-1.5 w-full px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-[11px] focus:outline-none focus:border-bambu-green [color-scheme:dark]`})]})]}),(0,G.jsx)(`div`,{className:`shrink-0 h-px bg-bambu-dark-tertiary`}),(0,G.jsx)(`div`,{className:`shrink-0 px-3 pt-2.5 pb-3`,children:(0,G.jsx)(`button`,{onClick:()=>{if(Ze!==null){let e=(En.find(e=>e.id===Ze)?.tray??[]).some(e=>e.state===11),t=st&&!e;if(lt===`now`)ir.mutate({amsId:Ze,temp:rt,duration:at,filament:tt,rotateTray:t});else{let e=Nee(lt,dt,pt);e&&ar.mutate({amsId:Ze,temp:rt,duration:at,filament:tt,rotateTray:t,startAfter:e})}}},disabled:ir.isPending||ar.isPending||lt===`at_time`&&!pt,"data-testid":`drying-start-confirm`,className:`w-full py-1.5 bg-bambu-green hover:bg-bambu-green/80 text-white text-xs font-medium rounded-lg transition-colors disabled:opacity-50`,children:lt===`now`?ir.isPending?F(`printers.drying.startingDrying`):F(`printers.drying.start`):F(`printers.drying.schedule`)})})]}),(0,G.jsx)(`div`,{className:`fixed z-[102] w-2.5 h-2.5 rotate-45 bg-bambu-dark-secondary border-bambu-dark-tertiary pointer-events-none`,style:{left:ht.left+ht.arrowLeft-5,top:ht.anchorY-5,...ht.placement===`above`?{borderRightWidth:1,borderBottomWidth:1}:{borderLeftWidth:1,borderTopWidth:1}}})]})})()]})}function yke({onClose:e,onAdd:t,existingSerials:n}){let{t:r}=U(),[i,a]=(0,y.useState)({name:``,serial_number:``,ip_address:``,access_code:``,model:``,location:``,auto_archive:!0}),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)([]),[u,d]=(0,y.useState)(``),[f,p]=(0,y.useState)(!1),[m,h]=(0,y.useState)(!1),[g,_]=(0,y.useState)([]),[v,b]=(0,y.useState)(``),[x,S]=(0,y.useState)(``),[C,w]=(0,y.useState)(!1),[T,E]=(0,y.useState)({scanned:0,total:0}),[D,O]=(0,y.useState)(!1),[k,A]=(0,y.useState)(!1),[j,M]=(0,y.useState)(null);(0,y.useEffect)(()=>{xd.getInfo().then(e=>{h(e.is_docker),e.subnets.length>0&&(_(e.subnets),b(e.subnets[0]))}).catch(()=>{});try{let e=localStorage.getItem(`bambuddy.discovery.customSubnet`);e&&S(e)}catch{}},[]);let N=c.filter(e=>!n.includes(e.serial)),P=async e=>{e.preventDefault(),A(!0);try{let e=await Z.diagnoseConnection({ip_address:i.ip_address.trim(),serial_number:i.serial_number.trim()||void 0,access_code:i.access_code||void 0});if(e.checks.some(e=>e.status===`fail`)){M(e);return}}catch{}finally{A(!1)}t(i)},F=async()=>{d(``),l([]),s(!0),p(!1),E({scanned:0,total:0});let e=C?x.trim():v,t=m||C;if(t&&C)try{localStorage.setItem(`bambuddy.discovery.customSubnet`,e)}catch{}try{if(t){await xd.startSubnetScan(e);let t=setInterval(async()=>{try{let e=await xd.getScanStatus();E({scanned:e.scanned,total:e.total}),l(await xd.getDiscoveredPrinters()),e.running||(clearInterval(t),s(!1),p(!0))}catch(e){console.error(`Failed to get scan status:`,e)}},500)}else{await xd.startDiscovery(10);let e=setInterval(async()=>{try{l(await xd.getDiscoveredPrinters())}catch(e){console.error(`Failed to get discovered printers:`,e)}},1e3);setTimeout(async()=>{clearInterval(e);try{await xd.stopDiscovery()}catch{}s(!1),p(!0);try{l(await xd.getDiscoveredPrinters())}catch(e){console.error(`Failed to get final discovered printers:`,e)}},1e4)}}catch(e){console.error(`Failed to start discovery:`,e),d(e instanceof Error?e.message:r(`printers.discovery.failedToStart`)),s(!1),p(!0)}},I=e=>{let t=e.serial.startsWith(`unknown-`)?``:e.serial;a({...i,name:e.name||``,serial_number:t,ip_address:e.ip_address,model:vG(e.model)}),l([])};return(0,y.useEffect)(()=>()=>{xd.stopDiscovery().catch(()=>{}),xd.stopSubnetScan().catch(()=>{})},[]),(0,y.useEffect)(()=>{let t=t=>{t.key===`Escape`&&e()};return window.addEventListener(`keydown`,t),()=>window.removeEventListener(`keydown`,t)},[e]),(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-start sm:items-center justify-center z-50 p-4 overflow-y-auto`,onClick:e,children:(0,G.jsx)(Ld,{className:`w-full max-w-md my-auto max-h-[calc(100vh-2rem)] overflow-y-auto`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(zd,{children:[(0,G.jsx)(`h2`,{className:`text-xl font-semibold mb-4`,children:r(`printers.addPrinter`)}),(0,G.jsxs)(`div`,{className:`mb-4 pb-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`mb-3`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`printers.discovery.subnetToScan`)}),g.length>0?(0,G.jsxs)(`select`,{className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,value:C?`__custom__`:v,onChange:e=>{e.target.value===`__custom__`?w(!0):(w(!1),b(e.target.value))},disabled:o,children:[g.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e)),(0,G.jsx)(`option`,{value:`__custom__`,children:r(`printers.discovery.customSubnetOption`)})]}):(0,G.jsx)(`input`,{type:`text`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,value:v,onChange:e=>b(e.target.value),placeholder:`192.168.1.0/24`,disabled:o}),C&&(0,G.jsx)(`input`,{type:`text`,"aria-label":r(`printers.discovery.customSubnetLabel`),className:`mt-2 w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,value:x,onChange:e=>S(e.target.value),placeholder:`10.1.1.0/24`,disabled:o}),(0,G.jsx)(`p`,{className:`mt-1 text-xs text-bambu-gray`,children:r(m?`printers.discovery.dockerNote`:`printers.discovery.customSubnetNote`)})]}),(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:F,disabled:o,className:`w-full`,children:o?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),(m||C)&&T.total>0?r(`printers.discovery.scanProgress`,{scanned:T.scanned,total:T.total}):r(`printers.discovery.scanning`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Zl,{className:`w-4 h-4`}),r(m||C?`printers.discovery.scanSubnet`:`printers.discovery.discoverNetwork`)]})}),u&&(0,G.jsx)(`div`,{className:`mt-2 text-sm text-red-700 dark:text-red-400`,children:u}),N.length>0&&(0,G.jsx)(`div`,{className:`mt-3 space-y-2 max-h-40 overflow-y-auto`,children:N.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-2 bg-bambu-dark rounded-lg hover:bg-bambu-dark-secondary cursor-pointer transition-colors`,onClick:()=>I(e),children:[(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`p`,{className:`font-medium text-white text-sm truncate`,children:e.name||e.serial}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray truncate`,children:[vG(e.model)||r(`printers.discovery.unknown`),` • `,e.ip_address,e.serial.startsWith(`unknown-`)&&(0,G.jsxs)(`span`,{className:`text-yellow-500`,children:[` • `,r(`printers.discovery.serialRequired`)]})]})]}),(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray -rotate-90 flex-shrink-0 ml-2`})]},e.serial))}),o&&(0,G.jsx)(`p`,{className:`mt-2 text-sm text-bambu-gray text-center`,children:r(m||C?`printers.discovery.scanningSubnet`:`printers.discovery.scanningNetwork`)}),f&&!o&&c.length===0&&(0,G.jsx)(`p`,{className:`mt-2 text-sm text-bambu-gray text-center`,children:r(m||C?`printers.discovery.noPrintersFoundSubnet`:`printers.discovery.noPrintersFoundNetwork`)}),f&&!o&&c.length>0&&N.length===0&&(0,G.jsx)(`p`,{className:`mt-2 text-sm text-bambu-gray text-center`,children:r(`printers.discovery.allConfigured`)})]}),(0,G.jsxs)(`form`,{onSubmit:P,className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`printers.name`)}),(0,G.jsx)(`input`,{type:`text`,required:!0,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:i.name,onChange:e=>a({...i,name:e.target.value}),placeholder:r(`printers.modal.myPrinter`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`printers.ipAddress`)}),(0,G.jsx)(`input`,{type:`text`,required:!0,pattern:`(\\d{1,3}(\\.\\d{1,3}){3}|[a-zA-Z0-9]([a-zA-Z0-9\\-]{0,61}[a-zA-Z0-9])?(\\.[a-zA-Z0-9]([a-zA-Z0-9\\-]{0,61}[a-zA-Z0-9])?)*)`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:i.ip_address,onChange:e=>a({...i,ip_address:e.target.value}),placeholder:`192.168.1.100 or printer.local`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`printers.serialNumber`)}),(0,G.jsx)(`input`,{type:`text`,required:!0,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:i.serial_number,onChange:e=>a({...i,serial_number:e.target.value}),placeholder:`01P00A000000000`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`printers.accessCode`)}),(0,G.jsx)(`input`,{type:`password`,required:!0,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:i.access_code,onChange:e=>a({...i,access_code:e.target.value}),placeholder:r(`printers.modal.fromPrinterSettings`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`printers.modal.modelOptional`)}),(0,G.jsxs)(`select`,{className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:i.model||``,onChange:e=>a({...i,model:e.target.value}),children:[(0,G.jsx)(`option`,{value:``,children:r(`printers.modal.selectModel`)}),(0,G.jsxs)(`optgroup`,{label:`A1 Series`,children:[(0,G.jsx)(`option`,{value:`A1`,children:`A1`}),(0,G.jsx)(`option`,{value:`A1 Mini`,children:`A1 Mini`})]}),(0,G.jsx)(`optgroup`,{label:`A2 Series`,children:(0,G.jsx)(`option`,{value:`A2L`,children:`A2L`})}),(0,G.jsxs)(`optgroup`,{label:`H2 Series`,children:[(0,G.jsx)(`option`,{value:`H2C`,children:`H2C`}),(0,G.jsx)(`option`,{value:`H2D`,children:`H2D`}),(0,G.jsx)(`option`,{value:`H2D Pro`,children:`H2D Pro`}),(0,G.jsx)(`option`,{value:`H2S`,children:`H2S`})]}),(0,G.jsxs)(`optgroup`,{label:`P Series`,children:[(0,G.jsx)(`option`,{value:`P1P`,children:`P1P`}),(0,G.jsx)(`option`,{value:`P1S`,children:`P1S`}),(0,G.jsx)(`option`,{value:`P2S`,children:`P2S`})]}),(0,G.jsxs)(`optgroup`,{label:`X1 Series`,children:[(0,G.jsx)(`option`,{value:`X1`,children:`X1`}),(0,G.jsx)(`option`,{value:`X1C`,children:`X1 Carbon`}),(0,G.jsx)(`option`,{value:`X1E`,children:`X1E`})]}),(0,G.jsx)(`optgroup`,{label:`X2 Series`,children:(0,G.jsx)(`option`,{value:`X2D`,children:`X2D`})})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`printers.modal.locationGroup`)}),(0,G.jsx)(`input`,{type:`text`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:i.location||``,onChange:e=>a({...i,location:e.target.value}),placeholder:r(`printers.modal.locationPlaceholder`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:r(`printers.locationHelp`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`checkbox`,id:`auto_archive`,checked:i.auto_archive,onChange:e=>a({...i,auto_archive:e.target.checked}),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsx)(`label`,{htmlFor:`auto_archive`,className:`text-sm text-bambu-gray`,children:r(`printers.modal.autoArchiveLabel`)})]}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>O(!0),disabled:!i.ip_address.trim(),className:`w-full flex items-center justify-center gap-2 px-3 py-2 text-sm text-bambu-gray hover:text-white disabled:opacity-40 disabled:cursor-not-allowed border border-bambu-dark-tertiary rounded-lg transition-colors`,children:[(0,G.jsx)(xu,{className:`w-4 h-4`}),r(`diagnostic.runButton`)]}),j?(0,G.jsxs)(`div`,{className:`rounded-lg bg-amber-50 dark:bg-amber-500/10 border border-amber-300 dark:border-amber-500/30 p-3 space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-start gap-2`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 mt-0.5 flex-shrink-0 text-amber-600 dark:text-amber-400`}),(0,G.jsx)(`p`,{className:`text-sm text-amber-700 dark:text-amber-300`,children:r(`printers.addPreflight.warning`)})]}),(0,G.jsx)(Up,{result:j}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:()=>M(null),className:`flex-1`,children:r(`printers.addPreflight.back`)}),(0,G.jsx)(Q,{type:`button`,onClick:()=>t(i),className:`flex-1`,children:r(`printers.addPreflight.saveAnyway`)})]})]}):(0,G.jsxs)(`div`,{className:`flex gap-3 pt-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:e,className:`flex-1`,children:r(`common.cancel`)}),(0,G.jsx)(Q,{type:`submit`,disabled:k,className:`flex-1`,children:r(k?`printers.addPreflight.checking`:`printers.addPrinter`)})]})]})]})})}),D&&(0,G.jsx)(Wp,{connection:{ip_address:i.ip_address.trim(),serial_number:i.serial_number.trim()||void 0,access_code:i.access_code||void 0},printerName:i.name||null,onClose:()=>O(!1)})]})}function bke({printer:e,firmwareInfo:t,onClose:n}){let{t:r}=U(),i=co(),{showToast:a}=Gd(),{hasPermission:o}=jd(),s=o(`firmware:update`),[c,l]=(0,y.useState)(null),[u,d]=(0,y.useState)(!1),[f,p]=(0,y.useState)(null),[m,h]=(0,y.useState)(t.update_available?t.latest_version:null),{data:g,isLoading:_}=K({queryKey:[`firmwarePrepare`,e.id,m],queryFn:()=>Td.prepareUpload(e.id,m??void 0),staleTime:3e4,enabled:!!m&&s&&!u}),v=q({mutationFn:()=>Td.startUpload(e.id,m??void 0),onSuccess:()=>{d(!0);let t=setInterval(async()=>{try{let n=await Td.getUploadStatus(e.id);l(n),(n.status===`complete`||n.status===`error`)&&(clearInterval(t),p(null),d(!1),n.status===`complete`&&(a(r(`printers.firmwareModal.uploadedToast`),`success`),i.invalidateQueries({queryKey:[`firmwareUpdate`,e.id]})))}catch{}},2e3);p(t)},onError:e=>{a(r(`printers.firmwareModal.uploadFailed`,{error:e.message}),`error`),d(!1)}});return(0,y.useEffect)(()=>()=>{f&&clearInterval(f)},[f]),(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50`,children:(0,G.jsx)(Ld,{className:`w-full max-w-md mx-4`,children:(0,G.jsxs)(zd,{children:[(0,G.jsxs)(`div`,{className:`flex items-start gap-3 mb-4`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-full ${t.update_available?`bg-orange-100 dark:bg-orange-500/20`:`bg-status-ok/20`}`,children:t.update_available?(0,G.jsx)(Ys,{className:`w-5 h-5 text-orange-600 dark:text-orange-400`}):(0,G.jsx)(xs,{className:`w-5 h-5 text-status-ok`})}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white`,children:t.update_available?r(`printers.firmwareModal.title`):r(`printers.firmwareModal.titleUpToDate`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:e.name})]})]}),(()=>{let e=m?t.available_versions?.find(e=>e.version===m):null,n=m??t.latest_version,i=e?.release_notes??t.release_notes,a=!!n&&n!==t.current_version;return(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-3 mb-4`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between items-center text-sm`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:r(`printers.firmwareModal.currentVersion`)}),(0,G.jsx)(`span`,{className:`font-mono ${a?`text-white`:`text-status-ok`}`,children:t.current_version||r(`common.unknown`)})]}),a&&(0,G.jsxs)(`div`,{className:`flex justify-between items-center text-sm mt-1`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:r(`printers.firmwareModal.latestVersion`)}),(0,G.jsx)(`span`,{className:`text-orange-700 dark:text-orange-400 font-mono`,children:n})]}),i&&(0,G.jsxs)(`details`,{className:`mt-3 text-sm`,open:!a,children:[(0,G.jsx)(`summary`,{className:`cursor-pointer hover:underline ${a?`text-orange-700 dark:text-orange-400`:`text-status-ok`}`,children:r(`printers.firmwareModal.releaseNotes`)}),(0,G.jsx)(`div`,{className:`mt-2 text-bambu-gray text-xs max-h-40 overflow-y-auto whitespace-pre-wrap`,children:i})]},n??`none`)]})})(),t.available_versions&&t.available_versions.length>0&&!u&&c?.status!==`complete`&&(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mb-2`,children:r(`printers.firmwareModal.availableVersions`)}),(0,G.jsx)(`div`,{className:`max-h-56 overflow-y-auto border border-bambu-dark-tertiary rounded-lg divide-y divide-bambu-dark-tertiary`,children:t.available_versions.map(e=>{let n=t.current_version===e.version,i=m===e.version,a=t.current_version?Cee(e.version,t.current_version):0,o=r(n?`printers.firmwareModal.currentBadge`:a>0?`printers.firmwareModal.newerBadge`:`printers.firmwareModal.olderBadge`),c=n?`text-bambu-gray`:a>0?`text-orange-700 dark:text-orange-400`:`text-blue-700 dark:text-blue-400`;return(0,G.jsxs)(`button`,{type:`button`,disabled:!e.file_available||!s||n,onClick:()=>h(e.version),className:`w-full text-left px-3 py-2 text-sm flex items-center justify-between gap-2 transition-colors ${i?`bg-orange-50 dark:bg-orange-500/10`:`hover:bg-bambu-dark`} ${!e.file_available||!s||n?`opacity-60 cursor-not-allowed`:`cursor-pointer`}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 min-w-0`,children:[(0,G.jsx)(`span`,{className:`font-mono text-white`,children:e.version}),(0,G.jsx)(`span`,{className:`text-xs ${c}`,children:o})]}),(0,G.jsx)(`span`,{className:`text-xs px-2 py-0.5 rounded-full ${n?`bg-blue-50 dark:bg-blue-500/15 text-blue-700 dark:text-blue-400 border border-blue-300 dark:border-blue-500/30`:e.file_available?`bg-bambu-green/15 text-bambu-green border border-bambu-green/30`:`bg-bambu-gray/10 text-bambu-gray border border-bambu-gray/30`}`,children:n?r(`printers.firmwareModal.installed`):e.file_available?r(`printers.firmwareModal.usable`):r(`printers.firmwareModal.unavailable`)})]},e.version)})})]}),m?_?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray text-sm mb-4`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),r(`printers.firmwareModal.checkingPrereqs`)]}):g&&!u&&!c?(0,G.jsx)(`div`,{className:`mb-4`,children:g.can_proceed?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-green text-sm`,children:[(0,G.jsx)(Zo,{className:`w-4 h-4`}),r(`printers.firmwareModal.sdCardReady`)]}):(0,G.jsx)(`div`,{className:`space-y-1`,children:g.errors.map((e,t)=>(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-red-700 dark:text-red-400 text-sm`,children:[(0,G.jsx)(ys,{className:`w-4 h-4 flex-shrink-0`}),e]},t))})}):null:null,(u||c)&&c&&(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-sm mb-1`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray capitalize`,children:c.status}),(0,G.jsxs)(`span`,{className:`text-white`,children:[c.progress,`%`]})]}),(0,G.jsx)(`div`,{className:`w-full bg-bambu-dark-tertiary rounded-full h-2`,children:(0,G.jsx)(`div`,{className:`h-2 rounded-full transition-all ${c.status===`error`?`bg-status-error`:c.status===`complete`?`bg-status-ok`:`bg-orange-500`} ${c.status===`uploading`?`animate-pulse`:``}`,style:{width:`${c.progress}%`}})}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:c.message}),c.error&&(0,G.jsx)(`p`,{className:`text-xs text-red-700 dark:text-red-400 mt-1`,children:c.error})]}),c?.status===`complete`&&(0,G.jsxs)(`div`,{className:`bg-bambu-green/10 border border-bambu-green/30 rounded-lg p-3 mb-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-green font-medium mb-2`,children:r(`printers.firmwareModal.uploadedSuccess`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:r(`printers.firmwareModal.applyInstructions`)}),(0,G.jsxs)(`ol`,{className:`text-xs text-bambu-gray mt-1 list-decimal list-inside space-y-1`,children:[(0,G.jsx)(`li`,{dangerouslySetInnerHTML:{__html:r(`printers.firmwareModal.step1`)}}),(0,G.jsx)(`li`,{dangerouslySetInnerHTML:{__html:r(`printers.firmwareModal.step2`)}}),(0,G.jsx)(`li`,{dangerouslySetInnerHTML:{__html:r(`printers.firmwareModal.step3`)}}),(0,G.jsx)(`li`,{children:r(`printers.firmwareModal.step4`)})]})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 justify-end`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:n,children:c?.status===`complete`?r(`printers.firmwareModal.done`):r(`common.cancel`)}),g?.can_proceed&&!u&&c?.status!==`complete`&&s&&(0,G.jsx)(Q,{onClick:()=>{l(null),v.mutate()},disabled:v.isPending,children:v.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin mr-2`}),r(`printers.firmwareModal.starting`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ys,{className:`w-4 h-4 mr-2`}),r(`printers.firmwareModal.uploadFirmware`)]})})]})]})})})}function xke({printer:e,onClose:t}){let{t:n}=U(),r=co(),{showToast:i}=Gd(),[a,o]=(0,y.useState)({name:e.name,ip_address:e.ip_address,access_code:``,model:e.model||``,location:e.location||``,auto_archive:e.auto_archive,is_active:e.is_active}),[s,c]=(0,y.useState)(!1),[l,u]=(0,y.useState)(null),d=q({mutationFn:t=>Z.updatePrinter(e.id,t),onSuccess:()=>{r.invalidateQueries({queryKey:[`printers`]}),r.invalidateQueries({queryKey:[`printerStatus`,e.id]}),t()},onError:e=>i(e.message||n(`printers.toast.failedToUpdate`),`error`)});(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&t()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[t]);let f=()=>{let e={name:a.name,ip_address:a.ip_address,model:a.model||void 0,location:a.location||void 0,auto_archive:a.auto_archive,is_active:a.is_active};a.access_code&&(e.access_code=a.access_code),d.mutate(e)};return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-start sm:items-center justify-center z-50 p-4 overflow-y-auto`,onClick:t,children:(0,G.jsx)(Ld,{className:`w-full max-w-md my-auto max-h-[calc(100vh-2rem)] overflow-y-auto`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(zd,{children:[(0,G.jsx)(`h2`,{className:`text-xl font-semibold mb-4`,children:n(`printers.editPrinter`)}),(0,G.jsxs)(`form`,{onSubmit:async t=>{t.preventDefault(),c(!0);try{let t=await Z.diagnoseConnection({ip_address:a.ip_address.trim(),serial_number:e.serial_number,access_code:a.access_code||void 0});if(t.checks.some(e=>e.status===`fail`)){u(t);return}}catch{}finally{c(!1)}f()},className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`printers.name`)}),(0,G.jsx)(`input`,{type:`text`,required:!0,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:a.name,onChange:e=>o({...a,name:e.target.value}),placeholder:n(`printers.modal.myPrinter`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`printers.ipAddress`)}),(0,G.jsx)(`input`,{type:`text`,required:!0,pattern:`(\\d{1,3}(\\.\\d{1,3}){3}|[a-zA-Z0-9]([a-zA-Z0-9\\-]{0,61}[a-zA-Z0-9])?(\\.[a-zA-Z0-9]([a-zA-Z0-9\\-]{0,61}[a-zA-Z0-9])?)*)`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:a.ip_address,onChange:e=>o({...a,ip_address:e.target.value}),placeholder:`192.168.1.100 or printer.local`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`printers.serialNumber`)}),(0,G.jsx)(`input`,{type:`text`,disabled:!0,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray cursor-not-allowed`,value:e.serial_number}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(`printers.serialCannotBeChanged`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`printers.accessCode`)}),(0,G.jsx)(`input`,{type:`password`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:a.access_code,onChange:e=>o({...a,access_code:e.target.value}),placeholder:n(`printers.accessCodePlaceholder`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`printers.model`)}),(0,G.jsxs)(`select`,{className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:a.model,onChange:e=>o({...a,model:e.target.value}),children:[(0,G.jsx)(`option`,{value:``,children:n(`printers.modal.selectModel`)}),(0,G.jsxs)(`optgroup`,{label:`A1 Series`,children:[(0,G.jsx)(`option`,{value:`A1`,children:`A1`}),(0,G.jsx)(`option`,{value:`A1 Mini`,children:`A1 Mini`})]}),(0,G.jsx)(`optgroup`,{label:`A2 Series`,children:(0,G.jsx)(`option`,{value:`A2L`,children:`A2L`})}),(0,G.jsxs)(`optgroup`,{label:`H2 Series`,children:[(0,G.jsx)(`option`,{value:`H2C`,children:`H2C`}),(0,G.jsx)(`option`,{value:`H2D`,children:`H2D`}),(0,G.jsx)(`option`,{value:`H2D Pro`,children:`H2D Pro`}),(0,G.jsx)(`option`,{value:`H2S`,children:`H2S`})]}),(0,G.jsxs)(`optgroup`,{label:`P Series`,children:[(0,G.jsx)(`option`,{value:`P1P`,children:`P1P`}),(0,G.jsx)(`option`,{value:`P1S`,children:`P1S`}),(0,G.jsx)(`option`,{value:`P2S`,children:`P2S`})]}),(0,G.jsxs)(`optgroup`,{label:`X1 Series`,children:[(0,G.jsx)(`option`,{value:`X1`,children:`X1`}),(0,G.jsx)(`option`,{value:`X1C`,children:`X1 Carbon`}),(0,G.jsx)(`option`,{value:`X1E`,children:`X1E`})]}),(0,G.jsx)(`optgroup`,{label:`X2 Series`,children:(0,G.jsx)(`option`,{value:`X2D`,children:`X2D`})})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:`Location / Group`}),(0,G.jsx)(`input`,{type:`text`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:a.location,onChange:e=>o({...a,location:e.target.value}),placeholder:n(`printers.modal.locationPlaceholder`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(`printers.locationHelp`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`checkbox`,id:`edit_auto_archive`,checked:a.auto_archive,onChange:e=>o({...a,auto_archive:e.target.checked}),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsx)(`label`,{htmlFor:`edit_auto_archive`,className:`text-sm text-bambu-gray`,children:n(`printers.modal.autoArchiveLabel`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`checkbox`,id:`edit_maintenance_mode`,checked:!a.is_active,onChange:e=>o({...a,is_active:!e.target.checked}),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-amber-400 focus:ring-amber-400`}),(0,G.jsxs)(`label`,{htmlFor:`edit_maintenance_mode`,className:`text-sm text-bambu-gray flex items-center gap-1.5`,children:[(0,G.jsx)(ed,{className:`w-3.5 h-3.5 text-amber-600 dark:text-amber-400`}),n(`printers.maintenance.editFieldLabel`)]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/70 mt-1 ml-6`,children:n(`printers.maintenance.editFieldHelp`)})]}),l?(0,G.jsxs)(`div`,{className:`rounded-lg bg-amber-50 dark:bg-amber-500/10 border border-amber-300 dark:border-amber-500/30 p-3 space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-start gap-2`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 mt-0.5 flex-shrink-0 text-amber-600 dark:text-amber-400`}),(0,G.jsx)(`p`,{className:`text-sm text-amber-700 dark:text-amber-300`,children:n(`printers.addPreflight.warning`)})]}),(0,G.jsx)(Up,{result:l}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:()=>u(null),className:`flex-1`,children:n(`printers.addPreflight.back`)}),(0,G.jsx)(Q,{type:`button`,onClick:f,className:`flex-1`,disabled:d.isPending,children:n(`printers.addPreflight.saveAnyway`)})]})]}):(0,G.jsxs)(`div`,{className:`flex gap-3 pt-4`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:t,className:`flex-1`,children:n(`common.cancel`)}),(0,G.jsx)(Q,{type:`submit`,className:`flex-1`,disabled:d.isPending||s,children:s?n(`printers.addPreflight.checking`):d.isPending?n(`common.saving`):n(`printers.modal.saveChanges`)})]})]})]})})})}function Ske(e){let{data:t}=K({queryKey:[`printerStatus`,e],queryFn:()=>Z.getPrinterStatus(e),refetchInterval:3e4});return!t?.connected}function Cke({printer:e,plug:t,onPowerOn:n,isPowering:r}){let i=Ske(e.id),{data:a}=K({queryKey:[`smartPlugStatus`,t.id],queryFn:()=>Z.getSmartPlugStatus(t.id),refetchInterval:1e4});return i?(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-3 py-2 hover:bg-gray-100 dark:hover:bg-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 min-w-0`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white truncate`,children:e.name}),a&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded ${a.state===`ON`?`bg-bambu-green/20 text-bambu-green`:`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`}`,children:a.state||`?`})]}),(0,G.jsxs)(`button`,{onClick:()=>n(t.id),disabled:r||a?.state===`ON`,className:`px-2 py-1 text-xs rounded transition-colors flex items-center gap-1 ${a?.state===`ON`?`bg-bambu-green/20 text-bambu-green cursor-default`:`bg-bambu-green/20 text-bambu-green hover:bg-bambu-green hover:text-white`}`,children:[(0,G.jsx)(Il,{className:`w-3 h-3`}),r?`...`:`On`]})]}):null}function wke(){let{t:e}=U(),{resolvedMode:t,darkAccent:n,lightAccent:r}=Pd(),i={green:`bg-green-500 text-white hover:bg-green-400 border-green-400/60`,teal:`bg-teal-500 text-white hover:bg-teal-400 border-teal-400/60`,blue:`bg-blue-500 text-white hover:bg-blue-400 border-blue-400/60`,orange:`bg-orange-500 text-white hover:bg-orange-400 border-orange-400/60`,purple:`bg-purple-500 text-white hover:bg-purple-400 border-purple-400/60`,red:`bg-red-500 text-white hover:bg-red-400 border-red-400/60`}[t===`dark`?n:r],[a,o]=(0,y.useState)(!1),[s,c]=(0,y.useState)(()=>localStorage.getItem(`hideDisconnectedPrinters`)===`true`),[l,u]=(0,y.useState)(!1),[d,f]=(0,y.useState)(null),[p,m]=(0,y.useState)(()=>localStorage.getItem(`printerSortBy`)||`name`),[h,g]=(0,y.useState)(()=>localStorage.getItem(`printerSortAsc`)!==`false`),[_,v]=(0,y.useState)(()=>{let e=localStorage.getItem(`printerCardSize`);return e?parseInt(e,10):2}),[b,x]=(0,y.useState)(()=>localStorage.getItem(`printerPageView`)===`camwall`?`camwall`:`cards`),[S,C]=(0,y.useState)(()=>{let e=parseInt(localStorage.getItem(`camWallMaxLive`)||``,10);return Number.isFinite(e)&&e>0?e:4}),[w,T]=(0,y.useState)(()=>{let e=parseInt(localStorage.getItem(`camWallSnapshotSec`)||``,10);return Number.isFinite(e)&&e>0?e:8}),[E,D]=(0,y.useState)(()=>{let e=localStorage.getItem(`camWallStatusMode`);return e===`off`||e===`compact`||e===`full`?e:`full`}),O=_===1?`compact`:`expanded`,[k,A]=(0,y.useState)(null),j=(0,y.useCallback)(e=>{requestAnimationFrame(()=>{requestAnimationFrame(()=>{let t=document.getElementById(`printer-card-${e}`);if(!t)return;let n=document.querySelector(`header`)?.getBoundingClientRect().height??56,r=t.getBoundingClientRect().top+window.scrollY-n-16;window.scrollTo({top:Math.max(0,r),behavior:`smooth`})})})},[]),M=(0,y.useCallback)(e=>{A(e),v(2),localStorage.setItem(`printerCardSize`,`2`),j(e)},[j]),N=(0,y.useCallback)(()=>{let e=k;A(null),v(1),localStorage.setItem(`printerCardSize`,`1`),e!=null&&j(e)},[k,j]),[P,F]=(0,y.useState)(``),[I,L]=(0,y.useState)(()=>{let e=localStorage.getItem(`printerStatusFilter`);return ZOe(e)?e:`all`}),[R,z]=(0,y.useState)(()=>localStorage.getItem(`printerLocationFilter`)||`all`),[B,V]=(0,y.useState)(0),[ee,te]=(0,y.useState)(()=>{try{let e=localStorage.getItem(`printerCollapsedSections`);return e?JSON.parse(e):{}}catch{return{}}}),ne=co(),{showToast:re}=Gd(),{hasPermission:ie}=jd(),[ae,oe]=(0,y.useState)(()=>kee()),[se,H]=(0,y.useState)(()=>{let e=localStorage.getItem(`openEmbeddedCameras`);if(e)try{let t=JSON.parse(e);return new Map(t.map(e=>[e.id,e]))}catch{return new Map}return new Map});(0,y.useEffect)(()=>{let e=Array.from(se.values());e.length>0?localStorage.setItem(`openEmbeddedCameras`,JSON.stringify(e)):localStorage.removeItem(`openEmbeddedCameras`)},[se]);let{data:ce,isLoading:le}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:ue}=K({queryKey:[`ui-preferences`],queryFn:Z.getUiPreferences}),de=(0,y.useMemo)(()=>wm(ue?.nozzle_temp_presets,bm,0,320),[ue?.nozzle_temp_presets]),fe=(0,y.useMemo)(()=>wm(ue?.bed_temp_presets,xm,0,140),[ue?.bed_temp_presets]),pe=(0,y.useMemo)(()=>wm(ue?.chamber_temp_presets,Sm,0,65),[ue?.chamber_temp_presets]),me=(0,y.useMemo)(()=>wm(ue?.fan_speed_presets,Cm,0,100),[ue?.fan_speed_presets]),he=(0,y.useMemo)(()=>{if(ue?.drying_presets)try{let e=JSON.parse(ue.drying_presets);if(typeof e==`object`&&e&&Object.keys(e).length>0)return{...bG,...e}}catch{}return bG},[ue?.drying_presets]),ge=ae??(ue?.camera_view_mode===`embedded`?`embedded`:`window`),_e=(0,y.useCallback)(e=>{Aee(e),oe(e),ie(`settings:update`)&&Z.updateSettings({camera_view_mode:e}).then(()=>ne.invalidateQueries({queryKey:[`ui-preferences`]})).catch(e=>console.warn(`Could not save camera view mode as the default:`,e))},[ie,ne]),{data:ve}=K({queryKey:[`smart-plugs`],queryFn:Z.getSmartPlugs}),{data:ye}=K({queryKey:[`maintenanceOverview`],queryFn:Z.getMaintenanceOverview,staleTime:60*1e3}),{data:be}=K({queryKey:[`obico-printer-status`],queryFn:Z.getObicoPrinterStatus,refetchInterval:1e4}),xe=(0,y.useCallback)(e=>be?.enabled===!0&&(be.monitored_printers===null||be.monitored_printers.includes(e)),[be]),{data:Se}=K({queryKey:[`spoolman-status`],queryFn:Z.getSpoolmanStatus,staleTime:60*1e3}),Ce=Se?.enabled&&Se?.connected,{data:we}=K({queryKey:[`spoolman-settings`],queryFn:Z.getSpoolmanSettings,enabled:!!Ce,staleTime:60*1e3}),Te=we?.spoolman_sync_mode,{data:Ee}=K({queryKey:[`unlinked-spools`],queryFn:Z.getUnlinkedSpools,enabled:!!Ce,staleTime:30*1e3}),De=Ee&&Ee.length>0,{data:Oe}=K({queryKey:[`linked-spools`],queryFn:Z.getLinkedSpools,enabled:!!Ce,staleTime:30*1e3}),ke=Oe?.linked,{data:Ae}=K({queryKey:[`spool-assignments`],queryFn:()=>Z.getAssignments(),enabled:ie(`inventory:view_assignments`),staleTime:30*1e3}),je=q({mutationFn:({printerId:e,amsId:t,trayId:n})=>Z.unassignSpool(e,t,n),onSuccess:()=>{ne.invalidateQueries({queryKey:[`spool-assignments`]})}}),{data:Me,isLoading:Ne}=K({queryKey:[`spoolman-inventory-spools`],queryFn:()=>Z.getSpoolmanInventorySpools(!1),enabled:!!Ce,staleTime:30*1e3}),{data:Pe,isLoading:Fe}=K({queryKey:[`spoolman-slot-assignments`],queryFn:()=>Z.getSpoolmanSlotAssignments(),enabled:!!Ce,staleTime:30*1e3}),Ie=q({mutationFn:e=>Z.unassignSpoolmanSlot(e),onSuccess:()=>{ne.invalidateQueries({queryKey:[`spoolman-inventory-spools`]}),ne.invalidateQueries({queryKey:[`spoolman-slot-assignments`]})}}),Le=(e,t,n)=>Ae?.find(r=>r.printer_id===e&&r.ams_id===Number(t)&&r.tray_id===Number(n)),Re=ye?.reduce((e,t)=>(e[t.printer_id]={due_count:t.due_count,warning_count:t.warning_count,total_print_hours:t.total_print_hours},e),{})||{},ze=ve?.reduce((e,t)=>(t.printer_id&&(e[t.printer_id]=t),e),{})||{},Be=q({mutationFn:Z.createPrinter,onSuccess:()=>{ne.invalidateQueries({queryKey:[`printers`]}),ne.invalidateQueries({queryKey:[`maintenanceOverview`]}),o(!1)},onError:t=>{if(t instanceof od&&t.code===`printer_connection_failed`){re(e(`printers.toast.connectionFailedNotAdded`),`error`);return}re(t.message||e(`printers.toast.failedToAdd`),`error`)}}),Ve=q({mutationFn:e=>Z.controlSmartPlug(e,`on`),onSuccess:()=>{ne.invalidateQueries({queryKey:[`smart-plugs`]}),f(null)},onError:()=>{f(null)}}),[He,Ue]=(0,y.useState)(new Set),[We,Ge]=(0,y.useState)(!1),[Ke,qe]=(0,y.useState)(null),[Je,Ye]=(0,y.useState)(!1),Xe=We||He.size>0,Ze=(0,y.useCallback)(e=>{Ue(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},[]),Qe=(0,y.useCallback)(()=>{Ue(new Set),Ge(!1)},[]);(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&Xe&&Qe()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[Xe,Qe]);let $e=(0,y.useCallback)(async t=>{Ye(!0);let n=Array.from(He).filter(e=>{let n=ne.getQueryData([`printerStatus`,e]);if(t===`clearPlate`)return!!n?.awaiting_plate_clear;if(!n?.connected)return!1;switch(t){case`stop`:return n.state===`RUNNING`||n.state===`PAUSE`;case`pause`:return n.state===`RUNNING`;case`resume`:return n.state===`PAUSE`;case`clearHMS`:return n.hms_errors&&Dm(n.hms_errors).length>0;default:return!1}});if(n.length===0){re(e(`printers.bulk.noneApplicable`),`error`),Ye(!1),qe(null);return}let r={stop:Z.stopPrint,pause:Z.pausePrint,resume:Z.resumePrint,clearPlate:Z.clearPlate,clearHMS:Z.clearHMSErrors}[t],i=await Promise.allSettled(n.map(e=>r(e))),a=i.filter(e=>e.status===`fulfilled`).length,o=i.filter(e=>e.status===`rejected`).length;o===0?re(e(`printers.bulk.success`,{action:e(`printers.bulk.actions.${t}`),count:a})):re(e(`printers.bulk.partial`,{succeeded:a,failed:o}),`error`),n.forEach(e=>{ne.invalidateQueries({queryKey:[`printerStatus`,e]})}),Ye(!1),qe(null)},[He,ne,re,e]),et=(0,y.useCallback)(e=>{e===`stop`||e===`pause`||e===`clearPlate`?qe(e):$e(e)},[$e]),tt=()=>{let e=!s;c(e),localStorage.setItem(`hideDisconnectedPrinters`,String(e))},nt=e=>{m(e),localStorage.setItem(`printerSortBy`,e)},rt=e=>{L(e),localStorage.setItem(`printerStatusFilter`,e)},it=e=>{z(e),localStorage.setItem(`printerLocationFilter`,e)},at=()=>{let e=!h;g(e),localStorage.setItem(`printerSortAsc`,String(e))},ot=()=>{switch(_){case 1:return`grid-cols-1 sm:grid-cols-2 md:grid-cols-3 lg:grid-cols-4 xl:grid-cols-5`;case 2:return`grid-cols-1 md:grid-cols-2 xl:grid-cols-3`;case 3:return`grid-cols-1 lg:grid-cols-2`;case 4:return`grid-cols-1`;default:return`grid-cols-1 md:grid-cols-2 xl:grid-cols-3`}},st=[`S`,`M`,`L`,`XL`];(0,y.useEffect)(()=>ne.getQueryCache().subscribe(e=>{e.type===`updated`&&Array.isArray(e.query.queryKey)&&e.query.queryKey[0]===`printerStatus`&&V(e=>e+1)}),[ne]);let ct=(0,y.useMemo)(()=>{if(!ce)return[];let e=ce;if(P.trim()){let t=P.trim().toLowerCase();e=e.filter(e=>e.name.toLowerCase().includes(t)||(e.model||``).toLowerCase().includes(t)||(e.location||``).toLowerCase().includes(t)||(e.serial_number||``).toLowerCase().includes(t))}return R!==`all`&&(e=e.filter(e=>(e.location||``)===R)),I!==`all`&&(e=e.filter(e=>{let t=ne.getQueryData([`printerStatus`,e.id]);if(!t?.connected)return I===`offline`;let n=t.hms_errors?Dm(t.hms_errors):[];switch(I){case`printing`:return t.state===`RUNNING`;case`paused`:return t.state===`PAUSE`;case`finished`:return t.state===`FINISH`;case`error`:return t.state===`FAILED`||n.length>0;case`idle`:return t.state!==`RUNNING`&&t.state!==`PAUSE`&&t.state!==`FINISH`&&t.state!==`FAILED`&&n.length===0;case`offline`:return!1;default:return!0}})),e},[ce,P,I,R,ne,B]),lt=(0,y.useMemo)(()=>ce?[...new Set(ce.map(e=>e.location||``).filter(Boolean))].sort():[],[ce]);(0,y.useEffect)(()=>{!ce||R===`all`||lt.includes(R)||(z(`all`),localStorage.setItem(`printerLocationFilter`,`all`))},[ce,lt,R]);let ut=(0,y.useMemo)(()=>{let e=[...ct];switch(p){case`name`:e.sort((e,t)=>e.name.localeCompare(t.name));break;case`model`:e.sort((e,t)=>(e.model||``).localeCompare(t.model||``));break;case`location`:e.sort((e,t)=>{let n=e.location||``,r=t.location||``;return!n&&r?1:n&&!r?-1:n.localeCompare(r)||e.name.localeCompare(t.name)});break;case`status`:e.sort((e,t)=>{let n=ne.getQueryData([`printerStatus`,e.id]),r=ne.getQueryData([`printerStatus`,t.id]),i=e=>e?.connected?(e.hms_errors?Dm(e.hms_errors):[]).length>0?0:e.state===`RUNNING`?1:2:3;return i(n)-i(r)});break;case`eta`:e.sort((e,t)=>{let n=ne.getQueryData([`printerStatus`,e.id]),r=ne.getQueryData([`printerStatus`,t.id]),i=e=>e?.connected?e.state===`RUNNING`&&e.remaining_time!=null&&e.remaining_time>0?0:e.state===`RUNNING`?1:2:3,a=i(n),o=i(r);if(a!==o)return a-o;if(a===0){let e=(n.remaining_time??0)-(r.remaining_time??0);if(e!==0)return e}return e.name.localeCompare(t.name)});break}return h||e.reverse(),e},[ct,p,h,ne]),dt=(0,y.useCallback)(()=>{Ue(new Set(ut.map(e=>e.id))),Ge(!0)},[ut]),ft=(0,y.useCallback)(e=>{Ue(t=>{let n=new Set(t);return ut.forEach(t=>{_G(ne.getQueryData([`printerStatus`,t.id]))===e&&n.add(t.id)}),n}),Ge(!0)},[ut,ne]),pt=(0,y.useCallback)(e=>{Ue(t=>{let n=new Set(t);return ut.filter(t=>(t.location||``)===e).forEach(e=>n.add(e.id)),n}),Ge(!0)},[ut]),mt=(0,y.useCallback)(e=>{Ue(t=>{let n=new Set(t);return ut.filter(t=>(t.model||`Unknown`)===e).forEach(e=>n.add(e.id)),n}),Ge(!0)},[ut]),ht=(0,y.useCallback)(e=>{te(t=>{let n={...t,[e]:!t[e]};try{localStorage.setItem(`printerCollapsedSections`,JSON.stringify(n))}catch{}return n})},[]),gt=(0,y.useMemo)(()=>{if(p===`name`||p===`eta`)return null;let e={};return p===`location`?ut.forEach(t=>{let n=t.location||`Ungrouped`;e[n]||(e[n]=[]),e[n].push(t)}):p===`model`?ut.forEach(t=>{let n=t.model||`Unknown`;e[n]||(e[n]=[]),e[n].push(t)}):p===`status`&&ut.forEach(t=>{let n=_G(ne.getQueryData([`printerStatus`,t.id]));e[n]||(e[n]=[]),e[n].push(t)}),e},[p,ut,ne,B]),_t=(0,y.useRef)(null),vt=(0,y.useRef)(null),yt=(0,y.useRef)(0),[bt,xt]=(0,y.useState)(!1),St=(0,y.useCallback)(()=>{let e=_t.current;if(!e)return;let t=vt.current?.offsetWidth;t&&(yt.current=t);let n=yt.current>0&&e.clientWidth<yt.current+220+8;xt(e=>e===n?e:n)},[]),Ct=Object.keys(ze).length;(0,y.useLayoutEffect)(()=>{St();let e=_t.current;if(!e)return;if(typeof ResizeObserver>`u`)return window.addEventListener(`resize`,St),()=>window.removeEventListener(`resize`,St);let t=new ResizeObserver(()=>St());return t.observe(e),window.addEventListener(`resize`,St),()=>{t.disconnect(),window.removeEventListener(`resize`,St)}},[St,ce?.length,lt.length,s,Ct]);let wt=(t=!1)=>(0,G.jsxs)(G.Fragment,{children:[ce&&ce.length>0&&(0,G.jsx)(fG,{value:I,onChange:rt,fullWidth:t,options:$W.map(t=>({value:t.value,label:e(t.labelKey)}))}),ce&&ce.length>0&&lt.length>0&&(0,G.jsx)(fG,{value:R,onChange:it,fullWidth:t,options:[{value:`all`,label:e(`printers.filter.allLocations`)},...lt.map(e=>({value:e,label:e}))]}),(0,G.jsx)(`button`,{type:`button`,onClick:tt,"aria-pressed":s,className:`h-8 px-2 rounded-lg border text-sm font-medium transition-colors ${t?`w-full`:``} ${s?`bg-bambu-green border-bambu-green text-white`:`bg-bambu-dark border-bambu-dark-tertiary text-white hover:bg-bambu-dark-tertiary`}`,children:e(`printers.hideOffline`)})]}),Tt=(t=!1)=>(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1 ${t?`w-full`:``}`,children:[(0,G.jsx)(fG,{value:p,onChange:nt,fullWidth:t,options:[{value:`name`,label:e(`printers.sort.name`)},{value:`status`,label:e(`printers.sort.status`)},{value:`model`,label:e(`printers.sort.model`)},{value:`location`,label:e(`printers.sort.location`)},{value:`eta`,label:e(`printers.sort.eta`)}]}),(0,G.jsx)(`button`,{onClick:at,className:`h-8 shrink-0 px-2 rounded-lg border bg-bambu-dark border-bambu-dark-tertiary text-white hover:bg-bambu-dark-tertiary transition-colors flex items-center justify-center`,title:e(h?`printers.sort.descending`:`printers.sort.ascending`),children:h?(0,G.jsx)(Ho,{className:`w-4 h-4 text-white`}):(0,G.jsx)(Io,{className:`w-4 h-4 text-white`})})]}),(0,G.jsxs)(`div`,{className:`flex h-8 items-center bg-bambu-dark rounded-lg border border-bambu-dark-tertiary ${t?`w-full`:``}`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{x(`cards`),localStorage.setItem(`printerPageView`,`cards`)},className:`flex h-full items-center gap-1 rounded-l-lg px-2 text-xs font-medium transition-colors ${t?`flex-1 justify-center`:``} ${b===`cards`?`bg-bambu-green text-white`:`text-white hover:bg-bambu-dark-tertiary`}`,title:e(`printers.pageView.cards`),"aria-pressed":b===`cards`,children:[(0,G.jsx)(Jc,{className:`w-3.5 h-3.5`}),t&&(0,G.jsx)(`span`,{children:e(`printers.pageView.cards`)})]}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{x(`camwall`),localStorage.setItem(`printerPageView`,`camwall`)},className:`flex h-full items-center gap-1 rounded-r-lg px-2 text-xs font-medium transition-colors ${t?`flex-1 justify-center`:``} ${b===`camwall`?`bg-bambu-green text-white`:`text-white hover:bg-bambu-dark-tertiary`}`,title:e(`printers.pageView.camWall`),"aria-pressed":b===`camwall`,disabled:!ie(`camera:view`),children:[(0,G.jsx)(ml,{className:`w-3.5 h-3.5`}),t&&(0,G.jsx)(`span`,{children:e(`printers.pageView.camWall`)})]})]}),b===`camwall`&&ie(`camera:view`)&&(0,G.jsxs)(Ai,{to:`/camwall`,className:`flex h-8 items-center gap-1 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark px-2 text-xs font-medium text-white transition-colors hover:bg-bambu-dark-tertiary ${t?`w-full justify-center`:``}`,title:e(`printers.pageView.openCamWallPage`),children:[(0,G.jsx)(nc,{className:`w-3.5 h-3.5`}),t&&(0,G.jsx)(`span`,{children:e(`printers.pageView.openCamWallPage`)})]}),(0,G.jsx)(`div`,{className:`flex h-8 items-center bg-bambu-dark rounded-lg border border-bambu-dark-tertiary ${b===`camwall`?`opacity-40 pointer-events-none`:``} ${t?`w-full`:``}`,children:st.map((n,r)=>{let i=r+1,a=_===i;return(0,G.jsx)(`button`,{onClick:()=>{A(null),v(i),localStorage.setItem(`printerCardSize`,String(i))},className:`h-full px-2 text-xs font-medium transition-colors ${t?`flex-1`:``} ${r===0?`rounded-l-lg`:``} ${r===st.length-1?`rounded-r-lg`:``} ${a?`bg-bambu-green text-white`:`text-white hover:bg-bambu-dark-tertiary`}`,title:e(n===`S`?`printers.cardSize.small`:n===`M`?`printers.cardSize.medium`:n===`L`?`printers.cardSize.large`:`printers.cardSize.extraLarge`),children:n},n)})})]}),Et=(t=!1)=>(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`button`,{onClick:()=>{Xe?Qe():Ge(!0)},className:`h-8 px-2 rounded-lg border transition-colors ${t?`w-full justify-center gap-1.5 text-sm font-medium flex items-center`:``} ${Xe?`bg-bambu-green border-bambu-green text-white`:`bg-bambu-dark border-bambu-dark-tertiary text-white hover:bg-bambu-dark-tertiary`}`,title:e(`printers.bulk.select`),disabled:!ie(`printers:control`),children:[(0,G.jsx)(_u,{className:`w-4 h-4`}),t&&(0,G.jsx)(`span`,{children:e(`printers.bulk.select`)})]}),s&&Object.keys(ze).length>0&&(0,G.jsxs)(`div`,{className:`relative ${t?`w-full`:``}`,children:[(0,G.jsxs)(`button`,{onClick:()=>u(!l),className:`h-8 flex items-center gap-1.5 px-2 text-sm rounded-lg border transition-colors ${t?`w-full justify-between bg-bambu-dark border-bambu-dark-tertiary text-white hover:bg-bambu-dark-tertiary hover:text-white`:`bg-bambu-dark border-bambu-dark-tertiary text-white hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(Il,{className:`w-4 h-4`}),e(`printers.powerOn`)]}),(0,G.jsx)(ps,{className:`w-3 h-3 transition-transform ${l?`rotate-180`:``}`})]}),l&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-10`,onClick:()=>u(!1)}),(0,G.jsxs)(`div`,{className:`absolute right-0 mt-2 w-56 bg-white dark:bg-bambu-dark-secondary border border-gray-200 dark:border-bambu-dark-tertiary rounded-lg shadow-lg z-20 py-1`,children:[(0,G.jsx)(`div`,{className:`px-3 py-2 text-xs text-gray-500 dark:text-bambu-gray border-b border-gray-200 dark:border-bambu-dark-tertiary`,children:e(`printers.offlinePrintersWithPlugs`)}),ce?.filter(e=>ze[e.id]).map(e=>(0,G.jsx)(Cke,{printer:e,plug:ze[e.id],onPowerOn:e=>{f(e),Ve.mutate(e)},isPowering:d===ze[e.id]?.id},e.id)),ce?.filter(e=>ze[e.id]).length===0&&(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:`No printers with smart plugs`})]})]})]}),(0,G.jsxs)(Q,{onClick:()=>o(!0),disabled:!ie(`printers:create`),title:ie(`printers:create`)?void 0:e(`printers.permission.noAdd`),className:`!h-8 !min-h-8 px-2 py-0 ${t?`w-full`:``}`,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),e(`printers.addPrinter`)]})]});return(0,G.jsxs)(`div`,{className:`p-4 md:p-8`,children:[(0,G.jsxs)(`div`,{className:`space-y-3 mb-6`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(Ll,{className:`w-7 h-7 text-bambu-green`}),e(`printers.title`)]}),(0,G.jsx)(dke,{printers:ce})]}),(0,G.jsxs)(`div`,{ref:_t,className:`relative flex items-center gap-2`,children:[ce&&ce.length>0&&(0,G.jsxs)(`div`,{className:`relative min-w-0 flex-1`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray/50`}),(0,G.jsx)(`input`,{type:`search`,name:`printer-search`,autoComplete:`off`,"data-1p-ignore":!0,"data-lpignore":`true`,value:P,onChange:e=>F(e.target.value),placeholder:e(`printers.search`),"aria-label":e(`printers.search`),className:`w-full h-8 pl-9 pr-8 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`}),P&&(0,G.jsx)(`button`,{type:`button`,"aria-label":e(`common.clear`),onClick:()=>F(``),className:`absolute right-3 top-1/2 -translate-y-1/2 text-bambu-gray hover:text-white`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}),(0,G.jsxs)(`div`,{ref:vt,"aria-hidden":bt,inert:bt,className:`${bt?`absolute -left-[9999px] top-0 flex w-max pointer-events-none opacity-0`:`flex`} ml-auto items-center justify-end gap-2 flex-nowrap [&>*]:shrink-0`,children:[(0,G.jsx)(`div`,{className:`h-6 w-px bg-bambu-dark-tertiary`}),(0,G.jsx)(`div`,{className:`flex items-center gap-2`,children:wt()}),(0,G.jsx)(`div`,{className:`h-6 w-px bg-bambu-dark-tertiary`}),(0,G.jsx)(`div`,{className:`flex items-center gap-2`,children:Tt()}),(0,G.jsx)(`div`,{className:`h-6 w-px bg-bambu-dark-tertiary`}),(0,G.jsx)(`div`,{className:`flex items-center gap-2`,children:Et()})]}),bt&&(0,G.jsxs)(`div`,{className:`ml-auto flex items-center justify-end gap-1`,children:[(0,G.jsx)(pG,{label:e(`printers.toolbar.filters`,`Filters`),icon:(0,G.jsx)(Cc,{className:`w-4 h-4`}),children:(0,G.jsx)(`div`,{className:`flex w-48 flex-col gap-2`,children:wt(!0)})}),(0,G.jsx)(pG,{label:e(`printers.toolbar.view`,`View`),icon:(0,G.jsx)(du,{className:`w-4 h-4`}),children:(0,G.jsx)(`div`,{className:`flex w-48 flex-col gap-2`,children:Tt(!0)})}),(0,G.jsx)(pG,{label:e(`printers.toolbar.actions`,`Actions`),icon:(0,G.jsx)($s,{className:`w-4 h-4`}),children:(0,G.jsx)(`div`,{className:`flex w-48 flex-col gap-2`,children:Et(!0)})})]})]})]}),le?(0,G.jsx)(`div`,{className:`text-center py-12 text-bambu-gray`,children:e(`common.loading`)}):ce?.length===0?(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`text-center py-12`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray mb-4`,children:e(`printers.noPrintersConfigured`)}),(0,G.jsxs)(Q,{onClick:()=>o(!0),disabled:!ie(`printers:create`),title:ie(`printers:create`)?void 0:e(`printers.permission.noAdd`),children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),e(`printers.addPrinter`)]})]})}):ut.length===0&&(P.trim()||I!==`all`||R!==`all`)?(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`text-center py-12`,children:(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`printers.noSearchResults`)})})}):b===`camwall`?(0,G.jsx)(PT,{printers:ut,maxLive:S,snapshotIntervalSec:w,onTileClick:(e,t)=>{ge===`embedded`?H(n=>new Map(n).set(e,{id:e,name:t})):fm(e)},statusMode:E,onChangeMaxLive:e=>{C(e),localStorage.setItem(`camWallMaxLive`,String(e))},onChangeSnapshotIntervalSec:e=>{T(e),localStorage.setItem(`camWallSnapshotSec`,String(e))},onChangeStatusMode:e=>{D(e),localStorage.setItem(`camWallStatusMode`,e)}}):gt?(0,G.jsx)(`div`,{className:`space-y-6`,children:(()=>{let e=p===`status`?pke.filter(e=>gt[e]?.length>0):Object.keys(gt);return h?e:[...e].reverse()})().map(t=>{let n=gt[t],r=`${p}:${t}`,i=!ee[r],a=p===`status`&&gG[t]?.dot||`bg-bambu-green`,o=p===`status`?e(gG[t]?.labelKey||t):t;return(0,G.jsx)(qp,{open:i,onToggle:()=>ht(r),summaryClassName:`py-1`,summary:(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full ${a}`}),o,(0,G.jsxs)(`span`,{className:`text-sm font-normal text-bambu-gray`,children:[`(`,n.length,`)`]}),Xe&&(0,G.jsx)(`button`,{onClick:e=>{e.stopPropagation(),p===`location`?pt(t===`Ungrouped`?``:t):p===`status`?ft(t):p===`model`&&mt(t)},className:`text-xs text-bambu-green hover:text-bambu-green-light transition-colors ml-1`,children:e(`printers.bulk.selectAll`)})]}),children:(0,G.jsx)(`div`,{className:`grid gap-4 ${_>=3?`gap-6`:``} ${ot()}`,children:n.map(e=>(0,G.jsx)(SG,{printer:e,hideIfDisconnected:s,maintenanceInfo:Re[e.id],viewMode:O,cardSize:_,amsThresholds:ue?{humidityGood:Number(ue.ams_humidity_good)||40,humidityFair:Number(ue.ams_humidity_fair)||60,tempGood:Number(ue.ams_temp_good)||28,tempFair:Number(ue.ams_temp_fair)||35}:void 0,spoolmanEnabled:Ce,hasUnlinkedSpools:De,linkedSpools:ke,spoolmanUrl:Se?.url,spoolmanSyncMode:Te,onGetAssignment:Le,onUnassignSpool:(e,t,n)=>je.mutate({printerId:e,amsId:t,trayId:n}),spoolmanSpools:Me,spoolmanSlotAssignments:Pe,spoolmanLoading:Ne||Fe,onUnassignSpoolmanSpool:e=>Ie.mutate(e),timeFormat:ue?.time_format||`system`,cameraViewMode:ge,onOpenEmbeddedCamera:(e,t)=>H(n=>new Map(n).set(e,{id:e,name:t})),onSelectCameraViewMode:_e,checkPrinterFirmware:ue?.check_printer_firmware!==!1,dryingPresets:he,nozzleTempPresets:de,bedTempPresets:fe,chamberTempPresets:pe,fanSpeedPresets:me,requirePlateClear:ue?.require_plate_clear===!0,selectionMode:Xe,isSelected:He.has(e.id),onToggleSelect:Ze,onOpenCompactCard:M,aiDetectionEnabled:xe(e.id),aiDetection:be?.enabled?be.per_printer[String(e.id)]:void 0,aiLastError:be?.last_error??null},e.id))})},t)})}):(0,G.jsx)(`div`,{className:`grid gap-4 ${_>=3?`gap-6`:``} ${ot()}`,children:ut.map(e=>(0,G.jsx)(SG,{printer:e,hideIfDisconnected:s,maintenanceInfo:Re[e.id],viewMode:O,cardSize:_,spoolmanEnabled:Ce,hasUnlinkedSpools:De,linkedSpools:ke,spoolmanUrl:Se?.url,spoolmanSyncMode:Te,onGetAssignment:Le,onUnassignSpool:(e,t,n)=>je.mutate({printerId:e,amsId:t,trayId:n}),spoolmanSpools:Me,spoolmanSlotAssignments:Pe,spoolmanLoading:Ne||Fe,onUnassignSpoolmanSpool:e=>Ie.mutate(e),amsThresholds:ue?{humidityGood:Number(ue.ams_humidity_good)||40,humidityFair:Number(ue.ams_humidity_fair)||60,tempGood:Number(ue.ams_temp_good)||28,tempFair:Number(ue.ams_temp_fair)||35}:void 0,timeFormat:ue?.time_format||`system`,cameraViewMode:ge,onOpenEmbeddedCamera:(e,t)=>H(n=>new Map(n).set(e,{id:e,name:t})),onSelectCameraViewMode:_e,checkPrinterFirmware:ue?.check_printer_firmware!==!1,dryingPresets:he,nozzleTempPresets:de,bedTempPresets:fe,chamberTempPresets:pe,fanSpeedPresets:me,requirePlateClear:ue?.require_plate_clear===!0,selectionMode:Xe,isSelected:He.has(e.id),onToggleSelect:Ze,onOpenCompactCard:M,aiDetectionEnabled:xe(e.id),aiDetection:be?.enabled?be.per_printer[String(e.id)]:void 0,aiLastError:be?.last_error??null},e.id))}),_===2&&k!=null&&(0,G.jsxs)(`button`,{type:`button`,onClick:N,className:`fixed bottom-5 left-1/2 z-40 inline-flex -translate-x-1/2 items-center gap-2 rounded-full border px-4 py-2 text-sm font-medium shadow-xl transition-colors ${i}`,title:e(`common.back`,`Back`),children:[(0,G.jsx)(Lo,{className:`w-4 h-4`}),e(`common.back`,`Back`)]}),a&&(0,G.jsx)(yke,{onClose:()=>o(!1),onAdd:e=>Be.mutate(e),existingSerials:ce?.map(e=>e.serial_number)||[]}),Xe&&ce&&(0,G.jsx)(Gee,{selectedIds:He,printers:ce,onClose:Qe,onSelectAll:dt,onSelectByLocation:pt,onSelectByState:ft,onAction:et,actionPending:Je}),Ke===`stop`&&(0,G.jsx)(rf,{title:e(`printers.bulk.confirm.stopTitle`,{count:He.size}),message:e(`printers.bulk.confirm.stopMessage`,{count:He.size}),confirmText:e(`printers.bulk.confirm.stopButton`),variant:`danger`,isLoading:Je,onConfirm:()=>$e(`stop`),onCancel:()=>qe(null)}),Ke===`pause`&&(0,G.jsx)(rf,{title:e(`printers.bulk.confirm.pauseTitle`,{count:He.size}),message:e(`printers.bulk.confirm.pauseMessage`,{count:He.size}),confirmText:e(`printers.bulk.confirm.pauseButton`),isLoading:Je,onConfirm:()=>$e(`pause`),onCancel:()=>qe(null)}),Ke===`clearPlate`&&(0,G.jsx)(rf,{title:e(`printers.bulk.confirm.clearPlateTitle`,{count:He.size}),message:e(`printers.bulk.confirm.clearPlateMessage`,{count:He.size}),confirmText:e(`printers.bulk.confirm.clearPlateButton`),isLoading:Je,onConfirm:()=>$e(`clearPlate`),onCancel:()=>qe(null)}),Array.from(se.values()).map((e,t)=>(0,G.jsx)(Use,{printerId:e.id,printerName:e.name,viewerIndex:t,onClose:()=>H(t=>{let n=new Map(t);return n.delete(e.id),n})},e.id))]})}function Tke({title:e,message:t,subtitle:n,closeText:r,variant:i=`error`,onClose:a}){let{t:o}=U(),s=r??o(`common.close`);return(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&a()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[a]),(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center p-4 z-[120]`,onClick:a,children:(0,G.jsx)(Ld,{className:`w-full max-w-md`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(zd,{className:`p-6`,children:[(0,G.jsxs)(`div`,{className:`flex items-start gap-4`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-full bg-bambu-dark ${i===`warning`?`text-yellow-600 dark:text-yellow-400`:`text-red-600 dark:text-red-400`}`,children:(0,G.jsx)(Iu,{className:`w-6 h-6`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white mb-1`,children:e}),n&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2 truncate`,children:n}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm whitespace-pre-line break-words`,children:t})]})]}),(0,G.jsx)(`div`,{className:`flex mt-6`,children:(0,G.jsx)(Q,{onClick:a,className:`flex-1`,children:s})})]})})})}var CG=(0,y.createContext)(null),Eke=1500,Dke=1e3,wG=e=>`slice-job-${e}`;function TG(e){try{return decodeURIComponent(e)}catch{return e}}function Oke(e){let t=Math.max(0,Math.floor(e));if(t<60)return`${t}s`;let n=Math.floor(t/60),r=t%60;return n<60?`${n}m ${r}s`:`${Math.floor(n/60)}h ${n%60}m`}function kke({children:e}){let{t}=U(),{showToast:n,showPersistentToast:r,dismissToast:i}=Gd(),a=co(),[o,s]=(0,y.useState)([]),[c,l]=(0,y.useState)(null),u=(0,y.useRef)([]);u.current=o;let d=(0,y.useRef)(new Map),f=(0,y.useRef)(new Map),p=(0,y.useRef)(new Map),m=(0,y.useRef)(new Set),h=(0,y.useCallback)(e=>{let n=d.current.get(e.id);if(n==null)return;let i=(Date.now()-n)/1e3,a=f.current.get(e.id)??`pending`,o=Oke(i),s=p.current.get(e.id)??null,c=s&&s.stage&&s.total_percent>0;if(a===`running`&&c){let n=TG(e.sourceName),i=s.stage,a=Math.min(100,Math.max(0,Math.round(s.total_percent))),c=typeof s.multi_plate_index==`number`&&typeof s.multi_plate_count==`number`&&s.multi_plate_count>1?t(`slice.runningWithProgressMultiPlate`,`Plate {{plateIndex}} of {{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,{plateIndex:s.multi_plate_index,plateCount:s.multi_plate_count,name:n,stage:i,percent:a,elapsed:o}):t(`slice.runningWithProgress`,`{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,{name:n,stage:i,percent:a,elapsed:o});r(wG(e.id),c,`loading`);return}let l=a===`pending`?`slice.queuedToast`:`slice.runningToast`,u=a===`pending`?`Queued: {{name}} — {{elapsed}}`:`Slicing {{name}} — {{elapsed}}`;r(wG(e.id),t(l,u,{name:TG(e.sourceName),elapsed:o}),`loading`)},[r,t]),g=(0,y.useCallback)((e,t,n)=>{s(r=>r.some(t=>t.id===e)?r:[...r,{id:e,kind:t,sourceName:n}]),m.current.delete(e),d.current.set(e,Date.now()),f.current.set(e,`pending`),p.current.set(e,null),h({id:e,kind:t,sourceName:n})},[h]),_=(0,y.useCallback)((e,r)=>{m.current.has(e.id)||(m.current.add(e.id),s(t=>t.filter(t=>t.id!==e.id)),d.current.delete(e.id),f.current.delete(e.id),p.current.delete(e.id),i(wG(e.id)),r.status===`completed`?(n(t(`slice.completedToast`,`Sliced {{name}}`,{name:TG(e.sourceName)}),`success`),r.result&&`external_write_fallback`in r.result&&r.result.external_write_fallback&&n(t(`slice.externalWriteFallbackToast`,`Saved to the internal library: the external folder could not be written to`),`warning`)):r.status===`failed`&&l({name:TG(e.sourceName),detail:r.error_detail||t(`slice.failed`)}),a.invalidateQueries({queryKey:[`library-files`]}),a.invalidateQueries({queryKey:[`archives`]}))},[i,a,n,t]);return(0,y.useEffect)(()=>{if(o.length===0)return;let e=!1,t=!1,n=setInterval(async()=>{if(!(e||t)){t=!0;try{let t=[...u.current];for(let n of t)try{let t=await Z.getSliceJob(n.id);if(e)return;f.current.set(n.id,t.status),t.progress&&p.current.set(n.id,t.progress),(t.status===`completed`||t.status===`failed`)&&_(n,t)}catch{}}finally{t=!1}}},Eke);return()=>{e=!0,clearInterval(n)}},[o.length,_]),(0,y.useEffect)(()=>{if(o.length===0)return;let e=setInterval(()=>{for(let e of u.current)h(e)},Dke);return()=>clearInterval(e)},[o.length,h]),(0,G.jsxs)(CG.Provider,{value:{trackJob:g,activeJobs:o},children:[e,c&&(0,G.jsx)(Tke,{title:t(`slice.failedTitle`),subtitle:c.name,message:c.detail,onClose:()=>l(null)})]})}function EG(){let e=(0,y.useContext)(CG);if(!e)throw Error(`useSliceJobTracker must be used inside SliceJobTrackerProvider`);return e}var DG=1024;function Ake(){let[e,t]=(0,y.useState)(()=>typeof window<`u`?window.innerWidth>=DG:!1);return(0,y.useEffect)(()=>{let e=window.matchMedia(`(min-width: ${DG}px)`),n=e=>{t(e.matches)};return t(e.matches),e.addEventListener(`change`,n),()=>e.removeEventListener(`change`,n)},[]),e}function OG({plates:e,onSelect:t,onClose:n}){let{t:r}=U();return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/60 p-4`,onClick:n,children:(0,G.jsxs)(`div`,{className:`w-full max-w-3xl max-h-[85vh] flex flex-col rounded-lg bg-bambu-dark-secondary border border-bambu-dark-tertiary/60`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex-shrink-0 flex items-start justify-between gap-3 px-4 pt-4 pb-3 border-b border-bambu-dark-tertiary/40`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`h3`,{className:`text-white font-medium`,children:r(`archives.platePicker.title`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:r(`archives.platePicker.hint`)})]}),(0,G.jsx)(`button`,{onClick:n,className:`flex-shrink-0 text-bambu-gray hover:text-white transition-colors`,"aria-label":r(`common.close`,`Close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto p-4`,children:(0,G.jsx)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 gap-2`,children:e.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>t(e.index),className:`flex items-center gap-2 p-2 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark hover:border-bambu-gray transition-colors text-left`,children:[e.has_thumbnail&&e.thumbnail_url!=null?(0,G.jsx)(`img`,{src:_d(e.thumbnail_url),alt:`Plate ${e.index}`,className:`w-12 h-12 rounded object-cover bg-bambu-dark-tertiary flex-shrink-0`}):(0,G.jsx)(`div`,{className:`w-12 h-12 rounded bg-bambu-dark-tertiary flex items-center justify-center flex-shrink-0`,children:(0,G.jsx)(qc,{className:`w-5 h-5 text-bambu-gray`})}),(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white font-medium truncate`,children:e.name?`${r(`archives.platePicker.plateLabel`,{index:e.index})} — ${e.name}`:r(`archives.platePicker.plateLabel`,{index:e.index})}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray truncate`,children:[e.objects.length>0?e.objects.slice(0,3).join(`, `)+(e.objects.length>3?`…`:``):e.object_count!=null&&e.object_count>0?r(`archives.platePicker.objectCount`,{count:e.object_count}):`${e.filaments.length} filament${e.filaments.length===1?``:`s`}`,e.print_time_seconds==null?``:` • ${op(e.print_time_seconds)}`]})]})]},e.index))})})]})})}var kG=e=>typeof e==`object`&&!!e&&`enumKey`in e,AG=`enum:`;function jG(e){if(typeof e==`number`)return e;if(typeof e==`boolean`)return+!!e;if(typeof e!=`string`)return;let t=Number.parseFloat(e);return Number.isFinite(t)?t:void 0}function MG(e){if(typeof e==`boolean`)return e;if(typeof e==`number`)return e!==0;if(e===`1`||e===`true`)return!0;if(e===`0`||e===`false`)return!1}function jke(e,t){return{get:n=>{let r=e[n];if((r===void 0||r===``)&&(r=t[n]?.default),Array.isArray(r)&&(r=r[0]),typeof r==`boolean`||typeof r==`number`||typeof r==`string`)return r},has:e=>e in t}}var Mke=[`->`,`||`,`&&`,`==`,`!=`,`<=`,`>=`,`(`,`)`,`,`,`<`,`>`,`!`];function Nke(e){let t=[],n=0;for(;n<e.length;){let r=e[n];if(r===` `||r===`	`||r===`
+`){n+=1;continue}if(r===`"`){let r=e.indexOf(`"`,n+1);if(r<0)return;t.push({kind:`str`,value:e.slice(n+1,r)}),n=r+1;continue}let i=/^\d+(\.\d*)?f?/.exec(e.slice(n));if(i&&/^[\d]/.test(r)){t.push({kind:`num`,value:Number.parseFloat(i[0])}),n+=i[0].length;continue}let a=Mke.find(t=>e.startsWith(t,n));if(a){t.push({kind:`op`,value:a}),n+=a.length;continue}let o=/^[A-Za-z_][A-Za-z0-9_]*(::[A-Za-z_][A-Za-z0-9_]*)*/.exec(e.slice(n));if(o){t.push({kind:`id`,value:o[0]}),n+=o[0].length;continue}return}return t}var Pke=new Set([`opt_bool`,`opt_int`,`opt_float`,`opt_float_nullable`,`opt_int_nullable`,`opt_bool_nullable`,`opt_enum`,`opt_string`,`option`,`has`]),Fke=class e{tokens=[];pos=0;cfg;locals;schema;resolving;memo;constructor(e,t,n,r,i){this.cfg=e,this.locals=t,this.schema=n,this.resolving=r,this.memo=i}evaluate(e){let t=Nke(e);if(!t||t.length===0)return;this.tokens=t,this.pos=0;let n=this.parseOr();if(this.pos===this.tokens.length)return n}peek(){return this.tokens[this.pos]}eatOp(e){let t=this.peek();return t&&t.kind===`op`&&t.value===e?(this.pos+=1,!0):!1}parseOr(){let e=this.parseAnd();for(;this.eatOp(`||`);){let t=this.parseAnd(),n=MG(e),r=MG(t);e=n===!0||r===!0?!0:n===void 0||r===void 0?void 0:n||r}return e}parseAnd(){let e=this.parseComparison();for(;this.eatOp(`&&`);){let t=this.parseComparison(),n=MG(e),r=MG(t);e=n===!1||r===!1?!1:n===void 0||r===void 0?void 0:n&&r}return e}parseComparison(){let e=this.parseUnary();for(let t of[`==`,`!=`,`<=`,`>=`,`<`,`>`])if(this.eatOp(t))return Ike(e,this.parseUnary(),t,this.schema);return e}parseUnary(){if(this.eatOp(`!`)){let e=MG(this.parseUnary());return e===void 0?void 0:!e}return this.parsePrimary()}parsePrimary(){let e=this.peek();if(!e)return;if(e.kind===`num`||e.kind===`str`)return this.pos+=1,e.value;if(e.kind===`op`&&e.value===`(`){this.pos+=1;let e=this.parseOr();return this.eatOp(`)`)?e:void 0}if(e.kind!==`id`)return;if(this.pos+=1,e.value===`true`)return!0;if(e.value===`false`)return!1;if(e.value===`config`)return this.parseConfigAccess();let t=this.locals[e.value];return t===void 0?`${AG}${e.value}`:this.resolveLocal(e.value,t)}parseConfigAccess(){if(!this.eatOp(`->`))return;let e=this.peek();if(!e||e.kind!==`id`||!Pke.has(e.value))return;if(this.pos+=1,this.eatOp(`<`)){let e=1;for(;e>0;){let t=this.peek();if(!t)return;this.pos+=1,t.kind===`op`&&t.value===`<`&&(e+=1),t.kind===`op`&&t.value===`>`&&--e}}if(!this.eatOp(`(`))return;let t=this.peek();if(!t||t.kind!==`str`)return;this.pos+=1;let n=t.value;for(;this.eatOp(`,`);){let e=0;for(;;){let t=this.peek();if(!t)return;if(t.kind===`op`&&t.value===`(`&&(e+=1),t.kind===`op`&&t.value===`)`){if(e===0)break;--e}if(t.kind===`op`&&t.value===`,`&&e===0)break;this.pos+=1}}if(!this.eatOp(`)`))return;if(this.eatOp(`->`)){let e=this.peek();if(!e||e.kind!==`id`)return;this.pos+=1}if(e.value===`has`)return this.cfg.has(n);let r=this.cfg.get(n);return this.schema[n]?.enum_values?{enumKey:n,value:typeof r==`string`?r:void 0}:r}resolveLocal(t,n){let r=this.memo.get(t);if(r!==void 0||this.memo.has(t))return r;if(this.resolving.has(t))return;this.resolving.add(t);let i=new e(this.cfg,this.locals,this.schema,this.resolving,this.memo).evaluate(n);return this.resolving.delete(t),this.memo.set(t,i),i}};function Ike(e,t,n,r){let i=typeof e==`string`&&e.startsWith(AG)?e:typeof t==`string`&&t.startsWith(AG)?t:void 0;if(i!==void 0){if(n!==`==`&&n!==`!=`)return;let a=i===e?t:e;if(!kG(a))return;let o=r[a.enumKey]?.enum_values;if(!o||a.value===void 0)return;let s=Lke(i.slice(5)).filter(e=>o.includes(e));if(s.length!==1)return;let c=s[0]===a.value;return n===`==`?c:!c}let a=kG(e)?e.value:e,o=kG(t)?t.value:t;if(n===`==`||n===`!=`){if(a===void 0||o===void 0)return;let e=typeof a==`string`||typeof o==`string`?String(a)===String(o):jG(a)===jG(o);return n===`==`?e:!e}let s=jG(a),c=jG(o);if(!(s===void 0||c===void 0)){if(n===`<`)return s<c;if(n===`<=`)return s<=c;if(n===`>`)return s>c;if(n===`>=`)return s>=c}}function Lke(e){let t=e.includes(`::`)?e.slice(e.lastIndexOf(`::`)+2):e,n=[t,/^[a-z]+([A-Z].*)$/.exec(t)?.[1]].filter(e=>!!e),r=new Set;for(let e of n){let t=e.replace(/([a-z0-9])([A-Z])/g,`$1_$2`).toLowerCase();r.add(t),r.add(t.replace(/_/g,` `)),r.add(t.replace(/_/g,``))}return[...r]}function Rke(e,t,n){let r=jke(e,t),i=new Map,a=new Set;for(let e of n.rules){let o=zke(e.enable_if);if(o&&MG(new Fke(r,n.locals,t,new Set,i).evaluate(o))===!1)for(let t of e.fields)a.add(t)}return a}function zke(e){let t=0;for(let n=0;n<e.length;n+=1){let r=e[n];if(r===`(`)t+=1;else if(r===`)`)--t;else if(r===`,`&&t===0)return e.slice(0,n).trim()||void 0}return e.trim()||void 0}var Bke=new Set([`coBools`,`coFloats`,`coFloatsOrPercents`]),Vke=e=>Bke.has(e.type);function NG(e){if(typeof e==`number`)return Number.isFinite(e)?e:void 0;if(typeof e!=`string`)return;let t=Number.parseFloat(e);return Number.isFinite(t)?t:void 0}function Hke(e){let t=e.sidetext;if(!(!t||t.includes(`->`)||t.includes(`::`)))return t}function PG(e,t){let n=t===void 0?e.default:t;return n===void 0?``:Array.isArray(n)?n.map(String).join(`, `):typeof n==`boolean`?n?`1`:`0`:String(n)}function FG(e,t){if(Vke(e))return(Array.isArray(t)?t.map(String):String(t).split(`,`)).map(e=>e.trim()).filter(e=>e!==``);if(e.type===`coBool`)return typeof t==`boolean`?t?`1`:`0`:t===`1`||t===`true`||t===1?`1`:`0`;let n=String(t).trim();return e.type===`coPercent`?n.endsWith(`%`)?n:`${n}%`:n}function Uke(e,t){let n={};for(let[r,i]of Object.entries(e)){let e=t[r];e&&(n[r]=FG(e,i))}return n}function IG(e,t,n){if(t===void 0||t===``)return!1;let r=t=>{let n=FG(e,Array.isArray(t)?t.map(String).join(`, `):t);return Array.isArray(n)?n.join(`, `):n},i=r(t),a=n===void 0?e.default:n;return a===void 0?i!==``:i!==r(a)}var Wke=new Set([`support_filament`,`support_interface_filament`,`outer_wall_filament_id`,`inner_wall_filament_id`,`top_surface_filament_id`,`bottom_surface_filament_id`,`internal_solid_filament_id`,`sparse_infill_filament_id`]),Gke=[`simple`,`advanced`,`expert`],LG={simple:0,advanced:1,expert:2,develop:3};function Kke({values:e,onChange:t,disabled:n=!1,sourceOverrides:r=[],sourceSelected:i,onToggleSource:a,filamentChoices:o,presetValues:s,presetValuesResolved:c=!0,presetValuesReason:l}){let{t:u}=U(),[d,f]=(0,y.useState)(null),[p,m]=(0,y.useState)(`simple`),[h,g]=(0,y.useState)(null),[_,v]=(0,y.useState)(``);(0,y.useEffect)(()=>{let e=!1;return Promise.all([Pt(()=>import(`./process-schema-CzfeynAH.js`),[]),Pt(()=>import(`./process-ui-tree-BWrKRLV6.js`),[]),Pt(()=>import(`./process-toggle-rules-DDBax3G5.js`),[])]).then(([t,n,r])=>{e||f({schema:t.default??t,tree:n.default??n,toggles:r.default??r})}),()=>{e=!0}},[]);let b=(0,y.useMemo)(()=>{let t={...s??{}};for(let e of r)i?.has(e.key)&&(t[e.key]=e.value);for(let[n,r]of Object.entries(e))r!==void 0&&r!==``&&(t[n]=r);return t},[s,r,i,e]),x=(0,y.useMemo)(()=>d?Rke(b,d.schema,d.toggles):new Set,[d,b]),S=(0,y.useMemo)(()=>new Map(r.map(e=>[e.key,e])),[r]),C=(0,y.useMemo)(()=>r.filter(e=>!e.printer_coupled&&!e.preset_defining),[r]),w=(0,y.useMemo)(()=>r.filter(e=>i?.has(e.key)).length,[r,i]),T=(0,y.useMemo)(()=>d?r.filter(e=>!d.schema[e.key]):[],[d,r]),E=e=>{if(!d)return;let n={};for(let[t,r]of Object.entries(e))d.schema[t]&&IG(d.schema[t],r,s?.[t])&&(n[t]=r);t(e,Uke(n,d.schema))},D=(t,n)=>{let r={...e};n===void 0?delete r[t]:r[t]=n,E(r)},O=(0,y.useMemo)(()=>{if(!d)return[];let e=e=>e.toLowerCase().replace(/[_\s]+/g,` `).trim(),t=e(_),n=e=>LG[d.schema[e]?.mode??`expert`]<=LG[p],r=(n,r,i)=>{if(!t)return!0;let a=d.schema[n];return[n,a?.label??``,a?.tooltip??``,r,i].some(n=>e(n).includes(t))};return d.tree.map(e=>({...e,groups:e.groups.map(t=>({...t,options:t.options.filter(i=>n(i)&&r(i,t.group,e.page))})).filter(e=>e.options.length>0)})).filter(e=>e.groups.length>0)},[d,p,_]),k=(0,y.useMemo)(()=>O.length===0||_.trim()?null:O.find(e=>e.page===h)??O[0],[O,h,_]),A=(0,y.useMemo)(()=>d?Object.keys(e).filter(t=>d.schema[t]&&IG(d.schema[t],e[t],s?.[t])).length:0,[d,e,s]);if(!d)return(0,G.jsxs)(`div`,{className:`flex items-center justify-center gap-2 py-8 text-sm text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),u(`slicerSettings.loading`,`Loading slicer settings...`)]});let j=k?[k]:O;return(0,G.jsxs)(`div`,{className:`flex flex-col gap-3`,children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2`,children:[(0,G.jsx)(`div`,{className:`flex overflow-hidden rounded border border-bambu-dark-tertiary`,children:Gke.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>m(e),disabled:n,className:`px-2.5 py-1 text-xs capitalize transition-colors ${p===e?`bg-bambu-green text-white`:`text-bambu-gray hover:text-white`}`,children:u(`slicerSettings.mode.${e}`,e)},e))}),(0,G.jsxs)(`div`,{className:`relative flex-1 min-w-[10rem]`,children:[(0,G.jsx)(Zl,{className:`absolute left-2 top-1/2 -translate-y-1/2 w-3.5 h-3.5 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`search`,value:_,onChange:e=>v(e.target.value),disabled:n,placeholder:u(`slicerSettings.searchPlaceholder`,`Search settings`),className:`w-full rounded border border-bambu-dark-tertiary bg-bambu-dark pl-7 pr-2 py-1 text-xs text-white placeholder:text-bambu-gray/60 focus:border-bambu-green focus:outline-none disabled:opacity-40`})]}),A>0&&(0,G.jsxs)(`button`,{type:`button`,onClick:()=>E({}),disabled:n,className:`flex items-center gap-1 text-xs text-bambu-gray hover:text-white`,children:[(0,G.jsx)(Ul,{className:`w-3 h-3`}),u(`slicerSettings.resetAll`,`Reset {{count}}`,{count:A})]})]}),!c&&(0,G.jsx)(`p`,{className:`rounded border border-amber-300 bg-amber-50 px-2 py-1 text-[0.7rem] text-amber-800 dark:border-amber-700/40 dark:bg-amber-900/20 dark:text-amber-200`,children:l===`sidecar_outdated`?u(`slicerSettings.presetValuesOutdatedSidecar`,`Showing slicer defaults: your slicer sidecar is older than this feature and can't report a preset's values. Update the sidecar image to see them. Anything you don't change still uses the preset.`):l===`not_configured`?u(`slicerSettings.presetValuesNotConfigured`,`Showing slicer defaults: no slicer sidecar is configured, so a preset's values can't be read. Anything you don't change still uses the preset.`):l===`sidecar_unavailable`?u(`slicerSettings.presetValuesSidecarUnavailable`,`Showing slicer defaults: the slicer sidecar did not answer, so a preset's values can't be read. Anything you don't change still uses the preset.`):u(`slicerSettings.presetValuesUnavailable`,`Showing slicer defaults: the picked preset's own values could not be read. Anything you don't change still uses the preset.`)}),r.length>0&&a&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 rounded border border-bambu-dark-tertiary px-2 py-1.5 text-[0.7rem] text-bambu-gray`,children:[(0,G.jsx)(`span`,{className:`min-w-0 flex-1`,children:u(`slicerSettings.fromFileSummary`,`The designer changed {{count}} process settings in this file. Only the ones you tick are used.`,{count:r.length})}),(0,G.jsx)(`button`,{type:`button`,disabled:n,onClick:()=>C.forEach(e=>a(e.key,!0)),title:u(`slicerSettings.fromFileUseAllHint`,`Ticks the settings that carry across printers. The ones tuned for the designer's own printer, and the ones that define the preset you picked, stay off.`),className:`shrink-0 rounded border border-bambu-dark-tertiary px-1.5 py-0.5 hover:text-white disabled:opacity-40`,children:u(`slicerSettings.fromFileUseAll`,`Use the designer's settings`)}),w>0&&(0,G.jsx)(`button`,{type:`button`,disabled:n,onClick:()=>r.forEach(e=>a(e.key,!1)),className:`shrink-0 rounded border border-bambu-dark-tertiary px-1.5 py-0.5 hover:text-white disabled:opacity-40`,children:u(`slicerSettings.fromFileClear`,`Clear {{count}}`,{count:w})})]}),!_.trim()&&(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1`,children:O.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>g(e.page),disabled:n,className:`px-2 py-1 text-xs rounded transition-colors ${k?.page===e.page?`bg-bambu-dark-tertiary text-white`:`text-bambu-gray hover:text-white`}`,children:e.page},e.page))}),j.length===0?(0,G.jsx)(`p`,{className:`py-6 text-center text-xs text-bambu-gray`,children:u(`slicerSettings.noMatches`,`No settings match this search.`)}):(0,G.jsxs)(`div`,{className:`flex flex-col gap-4 max-h-[22rem] lg:max-h-[58vh] overflow-y-auto pr-1`,children:[j.map(t=>(0,G.jsxs)(`div`,{className:`flex flex-col gap-3`,children:[_.trim()&&(0,G.jsx)(`p`,{className:`text-[0.7rem] uppercase tracking-wide text-bambu-gray/70`,children:t.page}),t.groups.map(r=>(0,G.jsxs)(`fieldset`,{className:`flex flex-col gap-1.5`,children:[(0,G.jsx)(`legend`,{className:`mb-1 text-xs font-medium text-white`,children:r.group}),r.options.map(t=>(0,G.jsx)(qke,{optionKey:t,option:d.schema[t],value:e[t],onChange:e=>D(t,e),disabled:n||x.has(t),disabledBySlicer:x.has(t),formDisabled:n,source:S.get(t),sourceOn:i?.has(t)??!1,onToggleSource:a,filamentChoices:Wke.has(t)?o:void 0,presetValue:s?.[t]},t))]},`${t.page}:${r.group}`))]},t.page)),T.length>0&&!_.trim()&&(0,G.jsxs)(`fieldset`,{className:`flex flex-col gap-1.5`,children:[(0,G.jsx)(`legend`,{className:`mb-1 text-xs font-medium text-white`,children:u(`slicerSettings.otherFromFile`,`Other settings from this file`)}),T.map(e=>(0,G.jsxs)(`label`,{className:`flex items-center gap-2 text-xs cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:i?.has(e.key)??!1,disabled:n||!a,onChange:t=>a?.(e.key,t.target.checked),className:`shrink-0 cursor-pointer disabled:opacity-40`}),(0,G.jsxs)(`span`,{className:`min-w-0 flex-1 truncate`,children:[(0,G.jsx)(`span`,{className:`font-mono text-bambu-gray`,children:e.key}),(0,G.jsx)(`span`,{className:`ml-1.5 text-white`,children:RG(e.value)})]}),(e.printer_coupled||e.preset_defining)&&(0,G.jsx)(`span`,{className:`shrink-0 rounded bg-amber-100 px-1 py-0.5 text-[10px] text-amber-700 dark:bg-amber-500/20 dark:text-amber-400`,children:e.printer_coupled?u(`slicerSettings.fromFilePrinterCoupled`,`designer's printer`):u(`slicerSettings.fromFileOverridesPreset`,`overrides preset`)})]},e.key))]})]})]})}function qke({optionKey:e,option:t,value:n,onChange:r,disabled:i,disabledBySlicer:a,formDisabled:o,source:s,sourceOn:c=!1,onToggleSource:l,filamentChoices:u,presetValue:d}){let{t:f}=U(),p=IG(t,n,d),m=Hke(t),h=n===void 0?c&&s?RG(s.value):PG(t,d):String(n);return(0,G.jsxs)(`div`,{className:`flex items-center gap-2 group`,title:t.tooltip,children:[(0,G.jsxs)(`label`,{htmlFor:`slicer-opt-${e}`,className:`flex min-w-0 flex-1 items-center gap-1 text-xs ${a?`text-bambu-gray/40`:`text-bambu-gray`}`,children:[(0,G.jsx)(`span`,{className:`truncate`,title:t.label||e,children:t.label||e}),p&&(0,G.jsx)(`span`,{className:`shrink-0 text-bambu-green`,"aria-hidden":`true`,children:`•`}),s&&(0,G.jsx)(`span`,{className:`shrink-0 rounded px-1 py-0.5 text-[10px] ${s.printer_coupled||s.preset_defining?`bg-amber-100 text-amber-700 dark:bg-amber-500/20 dark:text-amber-400`:`bg-bambu-green/15 text-bambu-green`}`,title:s.printer_coupled?f(`slicerSettings.fromFilePrinterCoupledHint`,`Tuned for the printer this file was designed for -- may be wrong or out of range on yours.`):s.preset_defining?f(`slicerSettings.fromFileOverridesPresetHint`,`The file sets this to {{value}} where the preset you picked uses {{preset}}. Tick it only if the file should win.`,{value:RG(s.value),preset:PG(t,d)}):f(`slicerSettings.fromFileHint`,`The designer changed this in the source file. Its value is {{value}}.`,{value:RG(s.value)}),children:s.printer_coupled?f(`slicerSettings.fromFilePrinterCoupled`,`designer's printer`):s.preset_defining?f(`slicerSettings.fromFileOverridesPreset`,`overrides preset`):f(`slicerSettings.fromFile`,`from file`)})]}),(0,G.jsxs)(`div`,{className:`flex shrink-0 items-center gap-1.5`,children:[(0,G.jsx)(`span`,{className:`flex w-3 shrink-0 justify-center`,children:s&&l&&(0,G.jsx)(`input`,{type:`checkbox`,checked:c,disabled:o,onChange:t=>l(e,t.target.checked),"aria-label":f(`slicerSettings.useFromFile`,`Use the source file's value for {{option}}`,{option:t.label||e}),title:f(`slicerSettings.useFromFile`,`Use the source file's value for {{option}}`,{option:t.label||e}),className:`w-3 h-3 cursor-pointer disabled:opacity-40`})}),(0,G.jsx)(`div`,{className:`w-40`,children:(0,G.jsx)(Jke,{id:`slicer-opt-${e}`,option:t,current:h,onChange:r,disabled:i,filamentChoices:u})}),(0,G.jsx)(`span`,{className:`w-16 shrink-0 whitespace-nowrap text-[0.65rem] text-bambu-gray/60`,children:m??``}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>r(void 0),disabled:i||!p,"aria-label":f(`slicerSettings.resetOption`,`Reset to default`),className:`p-0.5 transition-opacity ${p?`text-bambu-gray hover:text-white`:`opacity-0 pointer-events-none`}`,children:(0,G.jsx)(Ul,{className:`w-3 h-3`})})]})]})}function RG(e){return Array.isArray(e)?e.map(e=>String(e)).join(`, `):e==null?``:String(e)}function Jke({id:e,option:t,current:n,onChange:r,disabled:i,filamentChoices:a}){let{t:o}=U(),s=`w-full rounded border border-bambu-dark-tertiary bg-bambu-dark px-1.5 py-0.5 text-xs text-white focus:border-bambu-green focus:outline-none disabled:opacity-40`;if(a&&a.length>0){let t=a.find(e=>String(e.index)===n);return(0,G.jsxs)(`div`,{className:`relative w-full`,children:[(0,G.jsxs)(`select`,{id:e,value:n,onChange:e=>r(e.target.value),disabled:i,className:`${s} w-full cursor-pointer appearance-none pr-5`,title:t?.label,children:[(0,G.jsx)(`option`,{value:`0`,children:o(`slicerSettings.filamentDefault`,`Default`)}),a.map(e=>(0,G.jsxs)(`option`,{value:String(e.index),children:[e.index,`: `,e.label]},e.index))]}),(0,G.jsx)(ps,{className:`pointer-events-none absolute right-1.5 top-1/2 h-3 w-3 -translate-y-1/2 text-bambu-gray`})]})}return t.type===`coBool`?(0,G.jsx)(`input`,{id:e,type:`checkbox`,checked:n===`1`||n===`true`,onChange:e=>r(e.target.checked),disabled:i,className:`w-3.5 h-3.5 cursor-pointer disabled:opacity-40`}):t.type===`coEnum`&&t.enum_values?(0,G.jsxs)(`div`,{className:`relative w-full`,children:[(0,G.jsx)(`select`,{id:e,value:n,onChange:e=>r(e.target.value),disabled:i,className:`${s} w-full cursor-pointer appearance-none pr-5`,children:t.enum_values.map((e,n)=>(0,G.jsx)(`option`,{value:e,children:t.enum_labels?.[n]??e},e))}),(0,G.jsx)(ps,{className:`pointer-events-none absolute right-1.5 top-1/2 h-3 w-3 -translate-y-1/2 text-bambu-gray`})]}):t.type===`coInt`||t.type===`coFloat`||t.type===`coPercent`?(0,G.jsx)(`input`,{id:e,type:`number`,value:n.replace(`%`,``),min:NG(t.min),max:NG(t.max),step:t.type===`coInt`?1:`any`,onChange:e=>r(e.target.value),disabled:i,className:s}):(0,G.jsx)(`input`,{id:e,type:`text`,value:n,onChange:e=>r(e.target.value),disabled:i,className:s})}var zG=[`local`,`orca_cloud`,`cloud`,`standard`],Yke={local:1.75,orca_cloud:1.5,cloud:1,standard:.5};function BG(e,t){for(let n of zG){let r=e[n][t];if(r.length>0)return{source:r[0].source,id:r[0].id}}return null}function VG(e,t,n){return t?e[t.source][n].find(e=>e.id===t.id)??null:null}function HG(e,t,n){if(!n)return null;for(let r of zG){let i=e[r][t].find(e=>e.name===n);if(i)return{source:i.source,id:i.id}}return null}function Xke(e,t,n,r){let i=HG(e,`process`,r);if(i){let r=VG(e,i,`process`);if(r&&LU(r,`process`,t,n)!==`mismatch`)return i}for(let r of[`match`,`unknown`])for(let i of zG){let a=$ke(e[i].process.filter(e=>LU(e,`process`,t,n)===r));if(a)return{source:a.source,id:a.id}}return BG(e,`process`)}var Zke=.2,Qke=/^\s*([\d.]+)\s*mm\b/i;function $ke(e){let t=null,n=1/0,r=-1/0;for(let i of e){let e=Qke.exec(i.name),a=e?Number.parseFloat(e[1]):NaN,o=Number.isFinite(a)&&a>0,s=o?Math.abs(a-Zke):1/0;(t==null||s<n||s===n&&o&&a>r)&&(t=i,n=s,r=o?a:-1/0)}return t}function UG(e,t){let n=t.trim().toUpperCase(),r=(e.filament_type??``).trim().toUpperCase();return!!n&&!!r&&n!==r}function eAe(e,t,n,r){let i=t.type.trim().toUpperCase(),a=fp(t.color),o=null,s=null,c=null;for(let l of zG)for(let u of e[l].filament){let e=0,d=(u.filament_type??``).trim().toUpperCase(),f=fp(u.filament_colour??``);i&&d&&i===d&&(e+=10),a&&f&&(f===a?e+=5:xp(u.filament_colour??``,t.color)&&(e+=2)),e+=Yke[l];let p={source:u.source,id:u.id};UG(u,i)?(c==null||e>c.score)&&(c={ref:p,score:e}):LU(u,`filament`,n,r)===`mismatch`?(s==null||e>s.score)&&(s={ref:p,score:e}):(o==null||e>o.score)&&(o={ref:p,score:e})}return o==null?s==null?c==null?BG(e,`filament`):c.ref:s.ref:o.ref}function WG(e){return e?`${e.source}:${e.id}`:``}function tAe(e){if(!e)return null;let t=e.indexOf(`:`);if(t<0)return null;let n=e.slice(0,t),r=e.slice(t+1);return n!==`orca_cloud`&&n!==`cloud`&&n!==`local`&&n!==`standard`?null:{source:n,id:r}}function nAe({requestId:e,sourceName:t}){let{t:n}=U(),{showPersistentToast:r,dismissToast:i}=Gd(),[a,o]=(0,y.useState)(0),[s,c]=(0,y.useState)(null),l=t;try{l=decodeURIComponent(t)}catch{}(0,y.useEffect)(()=>{let e=Date.now(),t=setInterval(()=>o(Math.floor((Date.now()-e)/1e3)),1e3);return()=>clearInterval(t)},[]),(0,y.useEffect)(()=>{let t=!1,n=setInterval(async()=>{if(t)return;let n=await Z.getPreviewSliceProgress(e);!t&&n&&c(n)},1e3);return()=>{t=!0,clearInterval(n)}},[e]);let u=`slice-preview-${e}`;(0,y.useEffect)(()=>{let e=s&&s.stage&&s.total_percent>0,t=rAe(a);return e?r(u,n(`slice.previewWithProgress`,`Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,{name:l,stage:s.stage,percent:Math.min(100,Math.max(0,Math.round(s.total_percent))),elapsed:t}),`loading`):r(u,n(`slice.previewToast`,{name:l,elapsed:t}),`loading`),()=>{i(u)}},[a,s,l,r,i,n,u]);let d=s?.stage,f=s?.total_percent,p=d&&typeof f==`number`&&f>0?`${d} (${Math.min(100,Math.max(0,Math.round(f)))}%)`:n(`slice.analyzingPlateFilaments`);return(0,G.jsxs)(`div`,{className:`flex flex-col gap-1 text-bambu-gray text-sm py-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),p,(0,G.jsxs)(`span`,{className:`text-xs tabular-nums`,children:[a,`s`]})]}),a>=5&&(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray/70 pl-6`,children:n(`slice.analyzingPlateFilamentsHint`,`Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.`)})]})}function rAe(e){let t=Math.max(0,Math.floor(e));if(t<60)return`${t}s`;let n=Math.floor(t/60),r=t%60;return n<60?`${n}m ${r}s`:`${Math.floor(n/60)}h ${n%60}m`}var iAe=`#00AE42`;function GG(e){let t=(e||``).trim();return/^#[0-9a-fA-F]{6}([0-9a-fA-F]{2})?$/.test(t)?t.slice(0,7).toUpperCase():iAe}function KG({source:e,onClose:t}){let{t:n}=U(),{trackJob:r}=EG(),i=co(),[a,o]=(0,y.useState)(null),[s,c]=(0,y.useState)(null),[l,u]=(0,y.useState)([]),d=(0,y.useRef)(new Set),[f,p]=(0,y.useState)([]),[m,h]=(0,y.useState)(null),[g,_]=(0,y.useState)(null),[v,b]=(0,y.useState)(!1),[x,S]=(0,y.useState)(null),[C,w]=(0,y.useState)(!1),[T,E]=(0,y.useState)(!1),[D,O]=(0,y.useState)(!1),[k,A]=(0,y.useState)(new Set),[j,M]=(0,y.useState)({}),[N,P]=(0,y.useState)({}),[F,I]=(0,y.useState)(!1),L=Ake(),R=L||F,z=K({queryKey:[`slicer-pipelines`],queryFn:()=>Z.listSlicerPipelines(),staleTime:6e4}),[B,V]=(0,y.useState)(!1),[ee,te]=(0,y.useState)(``),{showToast:ne}=Gd(),re=q({mutationFn:e=>Z.createSlicerPipeline(e),onSuccess:()=>{i.invalidateQueries({queryKey:[`slicer-pipelines`]}),ne(n(`slice.pipelines.toast.saved`,`Pipeline saved`),`success`),V(!1),te(``)},onError:e=>{ne(e.message||n(`slice.pipelines.toast.saveFailed`,`Save failed`),`error`)}}),ie=K({queryKey:[`slicePlates`,e.kind,e.id],queryFn:async()=>e.kind===`libraryFile`?Z.getLibraryFilePlates(e.id):Z.getArchivePlates(e.id),staleTime:6e4}),ae=!!ie.data?.is_multi_plate&&(ie.data?.plates?.length??0)>1,oe=ae&&g==null,se=g??1,H=(0,y.useMemo)(()=>{let t=typeof crypto<`u`&&`randomUUID`in crypto?crypto.randomUUID():`${Date.now()}-${Math.random().toString(36).slice(2)}`;return`${e.kind}-${e.id}-p${se}-${t}`},[e.kind,e.id,se]),ce=K({queryKey:[`sliceFilamentReqs`,e.kind,e.id,se],queryFn:async()=>e.kind===`libraryFile`?Z.getLibraryFileFilamentRequirements(e.id,se,H,!0):Z.getArchiveFilamentRequirements(e.id,se,H,!0),enabled:!oe,staleTime:6e4}),le=(0,y.useMemo)(()=>{let e=ce.data?.filaments??[],t=e.length>0?e:[{slot_id:1,type:``,color:``,used_grams:0,used_meters:0}];return v?t.map(e=>({...e,used_in_plate:!0})):t},[v,ce.data]),ue=K({queryKey:[`slicerPresets`],queryFn:()=>Z.getSlicerPresets(),staleTime:6e4,enabled:!ie.isLoading&&!oe}),[de,fe]=(0,y.useState)(!1),pe=async()=>{if(!de){fe(!0);try{let e=await Z.getSlicerPresets({refresh:!0});i.setQueryData([`slicerPresets`],e)}catch{i.invalidateQueries({queryKey:[`slicerPresets`]})}finally{fe(!1)}}},me=K({queryKey:[`slicerPrinterModels`],queryFn:Z.getSlicerPrinterModels,staleTime:1/0}),he=(0,y.useMemo)(()=>!ue.data||!a?null:VG(ue.data,a,`printer`)?.name??null,[ue.data,a]),ge=(0,y.useMemo)(()=>jU(me.data??{}),[me.data]),_e=K({queryKey:[`slicer-preset-values`,s?.source,s?.id],queryFn:()=>Z.getSlicerPresetValues(s),enabled:s!=null,staleTime:5*6e4}),ve=_e.data?.values,ye=_e.data?.resolved??_e.isLoading,be=_e.data?.reason??(_e.isError?`sidecar_unavailable`:void 0),xe=(0,y.useMemo)(()=>{let e=ue.data;return le.map((t,r)=>{let i=l[r]??null,a=e&&i?VG(e,i,`filament`):null;return{index:r+1,label:a?.name||t.type||n(`slice.filamentSlotUnset`,`not set`),color:t.color||void 0}})},[le,l,ue.data,n]),Se=ie.data?.embedded_printer??null,Ce=(0,y.useMemo)(()=>ie.data?.design_overrides??[],[ie.data]),we=ie.data?.embedded_process??null,Te=(0,y.useMemo)(()=>{if(!Se||!we||!he)return!1;let e=e=>e.replace(/^#\s*/,``).trim().toLowerCase();return e(he)===e(Se)},[Se,we,he]);(0,y.useEffect)(()=>{Te||w(!1)},[Te]),(0,y.useEffect)(()=>{A(C?new Set(Ce.map(e=>e.key)):new Set)},[Ce,C]),(0,y.useEffect)(()=>{let e=ue.data;e&&(a??o(HG(e,`printer`,Se)??BG(e,`printer`)))},[ue.data,Se]),(0,y.useEffect)(()=>{let e=ue.data;e&&c(t=>{if(t){let n=VG(e,t,`process`);if(n&&LU(n,`process`,he,ge)!==`mismatch`)return t}return Xke(e,he,ge,we)})},[ue.data,he,ge,we]),(0,y.useEffect)(()=>{let e=ue.data;e&&u(t=>le.map((n,r)=>{let i=t[r]??null;if(i){let t=VG(e,i,`filament`),a=t&&!d.current.has(r)&&UG(t,n.type);if(t&&!a&&LU(t,`filament`,he,ge)!==`mismatch`)return i}return eAe(e,{type:n.type,color:n.color},he,ge)}))},[ue.data,le,he,ge]),(0,y.useEffect)(()=>{p(e=>e.length===le.length?e:(d.current=new Set,le.map(()=>null)))},[le]);let Ee=q({mutationFn:async t=>{let n=De(t);return e.kind===`libraryFile`?Z.sliceLibraryFile(e.id,n):Z.sliceArchive(e.id,n)},onSuccess:n=>{r(n.job_id,e.kind,e.filename),t()},onError:e=>{h(e instanceof Error?e.message:String(e))}});function De(e){if(!a||!s||l.length===0||l.some(e=>e==null))throw Error(n(`slice.allPresetsRequired`));return{printer_preset:a,process_preset:s,filament_preset:l[0],filament_presets:l,filament_colours:le.map((e,t)=>f[t]??e.color??``),...e==null?{}:{plate:e},...x==null?{}:{bed_type:x},...C&&Te?{use_embedded_settings:!0}:{},...!C&&Ce.length>0?{design_overrides:[...k]}:{},...!C&&Object.keys(j).length>0?{process_overrides:N}:{},...T?{auto_orient:!0}:{},...D?{auto_arrange:!0}:{}}}let Oe=a!=null&&s!=null&&ce.isSuccess&&l.length>0&&l.every(e=>e!=null),ke=Ee.isPending,Ae=ie.data?.plates?.length??0,je=ae&&Ae>1&&!oe;return oe&&ie.data?(0,G.jsx)(OG,{plates:ie.data.plates,onSelect:e=>_(e),onClose:t}):(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/60 p-4`,onClick:()=>{ke||t()},children:(0,G.jsxs)(`div`,{className:`w-full max-w-xl lg:max-w-5xl max-h-[85vh] flex flex-col rounded-lg bg-bambu-dark-secondary border border-bambu-dark-tertiary/60`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex-shrink-0 flex items-start justify-between gap-3 px-4 pt-4 pb-3 border-b border-bambu-dark-tertiary/40`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsxs)(`h3`,{className:`text-white font-medium flex items-center gap-2`,children:[(0,G.jsx)(Rs,{className:`w-4 h-4`}),n(`slice.title`)]}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-1 truncate`,title:e.filename,children:[e.filename,g==null?``:` • ${n(`archives.platePicker.plateLabel`,{index:g})}`]})]}),(0,G.jsx)(`button`,{onClick:t,disabled:ke,className:`flex-shrink-0 text-bambu-gray hover:text-white transition-colors disabled:opacity-50`,"aria-label":n(`common.close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`flex-1 overflow-y-auto p-4 space-y-4`,children:[(ie.isLoading||ue.isLoading)&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray text-sm`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),n(`slice.loadingPresets`)]}),ue.isError&&(0,G.jsx)(`div`,{className:`text-sm text-red-700 dark:text-red-400`,role:`alert`,children:n(`slice.presetsLoadFailed`,`Failed to load presets. Open Settings → Profiles to import them, or sign in to Bambu Cloud.`)}),ue.data&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex-1 space-y-2`,children:[(0,G.jsx)(qG,{status:ue.data.cloud_status,cloudName:`bambu`}),(0,G.jsx)(qG,{status:ue.data.orca_cloud_status,cloudName:`orca`})]}),(0,G.jsxs)(`button`,{type:`button`,onClick:pe,disabled:de||ke,className:`flex-shrink-0 inline-flex items-center gap-1 px-2 py-1 rounded-md text-xs text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary/40 disabled:opacity-50 disabled:cursor-not-allowed transition-colors`,title:n(`slice.refreshPresetsTitle`),"aria-label":n(`slice.refreshPresets`),children:[(0,G.jsx)(Vl,{className:`w-3.5 h-3.5 ${de?`animate-spin`:``}`}),n(`slice.refreshPresets`)]})]}),(0,G.jsxs)(`div`,{className:`lg:grid lg:grid-cols-[minmax(0,20rem)_minmax(0,1fr)] lg:gap-5 lg:items-start`,children:[(0,G.jsxs)(`div`,{className:`space-y-4 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 px-2 py-1.5 rounded-md bg-bambu-dark/40 border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`span`,{className:`text-xs font-medium text-bambu-gray flex items-center gap-1`,children:[(0,G.jsx)(Rs,{className:`w-3.5 h-3.5`}),` `,n(`slice.pipelines.label`,`Pipeline`)]}),(0,G.jsxs)(`select`,{value:``,disabled:ke||(z.data?.pipelines.length??0)===0,onChange:e=>{let t=parseInt(e.target.value,10);if(Number.isNaN(t))return;let r=z.data?.pipelines.find(e=>e.id===t);r&&(o(r.printer_preset),c(r.process_preset),S(r.bed_type),u(e=>{let t=e.length>0?[...e]:r.filament_presets.map(()=>null);for(let e=0;e<t.length;e++)e<r.filament_presets.length&&(t[e]=r.filament_presets[e],d.current.add(e));return t}),ne(n(`slice.pipelines.toast.applied`,`Applied "{{name}}"`,{name:r.name}),`success`),e.target.value=``)},className:`text-xs px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white disabled:opacity-50 disabled:cursor-not-allowed flex-1 min-w-[10ch]`,"aria-label":n(`slice.pipelines.applyAria`,`Apply pipeline`),children:[(0,G.jsx)(`option`,{value:``,children:(z.data?.pipelines.length??0)===0?n(`slice.pipelines.empty`,`No saved pipelines`):n(`slice.pipelines.applyPrompt`,`Apply pipeline…`)}),z.data?.pipelines.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]}),B?(0,G.jsxs)(`div`,{className:`flex items-center gap-1 flex-1 min-w-[16ch]`,children:[(0,G.jsx)(`input`,{autoFocus:!0,value:ee,onChange:e=>te(e.target.value),placeholder:n(`slice.pipelines.namePlaceholder`,`Pipeline name`),"aria-label":n(`slice.pipelines.nameAria`,`New pipeline name`),className:`flex-1 text-xs px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white`}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>{let e=ee.trim();if(!e||!a||!s)return;let t=l.filter(e=>e!==null);t.length!==0&&re.mutate({name:e,printer_preset:a,process_preset:s,filament_presets:t,bed_type:x})},disabled:re.isPending||!ee.trim(),className:`text-xs px-2 py-1 bg-bambu-green hover:bg-bambu-green/80 text-white rounded disabled:opacity-50`,children:re.isPending?(0,G.jsx)(Y,{className:`w-3 h-3 animate-spin`}):n(`common.save`,`Save`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>{V(!1),te(``)},className:`text-xs px-2 py-1 text-bambu-gray hover:text-white`,children:n(`common.cancel`,`Cancel`)})]}):(0,G.jsx)(`button`,{type:`button`,onClick:()=>{te(``),V(!0)},disabled:ke||!a||!s||l.length===0||l.some(e=>e===null),className:`text-xs px-2 py-1 bg-bambu-green/20 hover:bg-bambu-green/30 text-bambu-green border border-bambu-green/40 rounded disabled:opacity-50 disabled:cursor-not-allowed`,title:n(`slice.pipelines.saveTitle`,`Save the current four-slot selection as a reusable pipeline`),children:n(`slice.pipelines.saveButton`,`Save as pipeline`)})]}),(0,G.jsx)(JG,{label:n(`slice.printer`),slot:`printer`,data:ue.data,value:a,onChange:o,disabled:ke||C}),Te&&(0,G.jsxs)(`label`,{className:`flex items-start gap-2 text-sm text-bambu-gray cursor-pointer select-none`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:C,onChange:e=>w(e.target.checked),disabled:ke,className:`mt-0.5 cursor-pointer`}),(0,G.jsxs)(`span`,{children:[n(`slice.useEmbedded`),(0,G.jsx)(`span`,{className:`block text-xs text-bambu-gray/70`,children:n(`slice.useEmbeddedHint`)})]})]}),(0,G.jsx)(JG,{label:n(`slice.process`),slot:`process`,data:ue.data,value:s,onChange:c,disabled:ke||C,selectedPrinterName:he,compatIndex:ge}),(0,G.jsx)(oAe,{value:x,onChange:S,disabled:ke||C}),(0,G.jsxs)(`div`,{className:`flex flex-col gap-2`,children:[(0,G.jsxs)(`label`,{className:`flex items-start gap-2 text-sm text-bambu-gray cursor-pointer select-none`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:T,onChange:e=>E(e.target.checked),disabled:ke,className:`mt-0.5 cursor-pointer`}),(0,G.jsxs)(`span`,{children:[n(`slice.autoOrient`),(0,G.jsx)(`span`,{className:`block text-xs text-bambu-gray/70`,children:n(`slice.autoOrientHint`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-start gap-2 text-sm text-bambu-gray cursor-pointer select-none`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:D,onChange:e=>O(e.target.checked),disabled:ke,className:`mt-0.5 cursor-pointer`}),(0,G.jsxs)(`span`,{children:[n(`slice.autoArrange`),(0,G.jsx)(`span`,{className:`block text-xs text-bambu-gray/70`,children:n(`slice.autoArrangeHint`)})]})]})]}),ce.isLoading?(0,G.jsx)(nAe,{requestId:H,sourceName:e.filename}):le.map((e,t)=>{let r=e.used_in_plate!==!1,i=le.length>1?n(`slice.filamentSlot`,{index:t+1,type:e.type}):n(`slice.filament`);return(0,G.jsx)(JG,{label:r?i:`${i} ${n(`slice.notUsedByPlate`)}`,slot:`filament`,data:ue.data,value:l[t]??null,onChange:e=>{d.current.add(t),u(n=>{let r=n.length===le.length?[...n]:le.map((e,t)=>n[t]??null);return r[t]=e,r})},disabled:ke||!r||C,swatchColor:f[t]??e.color,swatchColorLabel:n(`slice.filamentColour`),onSwatchColorChange:e=>p(n=>{let r=n.length===le.length?[...n]:le.map((e,t)=>n[t]??null);return r[t]=e,r}),selectedPrinterName:he,compatIndex:ge},`filament-${t}`)})]}),(0,G.jsx)(`div`,{className:`mt-4 lg:mt-0 min-w-0`,children:(0,G.jsxs)(`div`,{className:`rounded border border-bambu-dark-tertiary p-3 ${C?`opacity-60`:``}`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>I(e=>!e),"aria-expanded":R,disabled:L,className:`flex w-full items-center justify-between gap-2 text-left lg:cursor-default`,children:[(0,G.jsxs)(`span`,{className:`text-sm text-white`,children:[n(`slice.processSettings`,`Process settings`),(0,G.jsx)(`span`,{className:`block text-xs text-bambu-gray/70`,children:C?n(`slice.processSettingsEmbedded`,`Not used while "Use the file's built-in settings" is on -- the file's own settings drive this slice.`):n(`slice.processSettingsHint`,`Adjust the picked preset for this slice. Anything you don't touch stays as the preset defines it.`)})]}),(0,G.jsx)(`span`,{className:`shrink-0 text-xs text-bambu-gray`,children:C?n(`slice.processSettingsInactive`,`Inactive`):Object.keys(N).length>0?n(`slice.processSettingsChanged`,`{{count}} changed`,{count:Object.keys(N).length}):n(`slice.processSettingsUnchanged`,`Preset defaults`)})]}),R&&(0,G.jsx)(`div`,{className:`mt-3 border-t border-bambu-dark-tertiary pt-3`,children:(0,G.jsx)(Kke,{values:j,onChange:(e,t)=>{M(e),P(t)},disabled:ke||C,filamentChoices:xe,presetValues:ve,presetValuesResolved:ye,presetValuesReason:be,sourceOverrides:Ce,sourceSelected:k,onToggleSource:(e,t)=>A(n=>{let r=new Set(n);return t?r.add(e):r.delete(e),r})})})]})})]})]}),m&&(0,G.jsx)(`div`,{className:`text-sm text-red-700 dark:text-red-400 bg-red-900/20 border border-red-900/40 rounded p-2`,role:`alert`,children:m})]}),(0,G.jsxs)(`div`,{className:`flex-shrink-0 flex justify-end gap-2 px-4 py-3 border-t border-bambu-dark-tertiary/40`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:t,disabled:ke,className:`px-3 py-1.5 text-sm rounded-md border border-bambu-dark-tertiary text-bambu-gray hover:text-white hover:border-bambu-gray transition-colors disabled:opacity-50`,children:n(`common.cancel`)}),je&&(0,G.jsxs)(`label`,{className:`flex items-center gap-2 mr-auto text-sm text-bambu-gray cursor-pointer select-none`,title:n(`slice.actionAllTitle`,{count:Ae}),children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:v,onChange:e=>b(e.target.checked),disabled:ke,className:`cursor-pointer`}),n(`slice.allPlatesToggle`,{count:Ae})]}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>{h(null);let e=v?0:g;Ee.mutate(e)},disabled:!Oe||ke,className:`px-3 py-1.5 text-sm rounded-md bg-bambu-green hover:bg-bambu-green/90 text-bambu-dark font-medium transition-colors disabled:opacity-50 disabled:cursor-not-allowed flex items-center gap-2`,children:ke?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),n(`slice.enqueuing`)]}):v?n(`slice.actionAll`,{count:Ae}):n(`slice.action`)})]})]})})}function qG({status:e,cloudName:t=`bambu`}){let{t:n}=U();if(e===`ok`||e===`not_authenticated`)return null;let r=t===`orca`?{expired:{key:`slice.orcaCloud.expired`,fallback:`Orca Cloud session expired — sign in again to refresh your Orca presets.`},unreachable:{key:`slice.orcaCloud.unreachable`,fallback:`Orca Cloud is unreachable right now. Other presets still work.`}}:{expired:{key:`slice.cloud.expired`,fallback:`Bambu Cloud session expired — sign in again to refresh your cloud presets.`},unreachable:{key:`slice.cloud.unreachable`,fallback:`Bambu Cloud is unreachable right now. Local and standard presets still work.`}},{tone:i,icon:a}={expired:{tone:`border-amber-300 dark:border-amber-700/40 bg-amber-50 dark:bg-amber-900/20 text-amber-800 dark:text-amber-200`,icon:Ms},unreachable:{tone:`border-bambu-dark-tertiary/40 bg-bambu-dark text-bambu-gray`,icon:Ms}}[e],{key:o,fallback:s}=r[e];return(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-xs rounded-md border p-2 ${i}`,role:`status`,children:[(0,G.jsx)(a,{className:`w-4 h-4 flex-shrink-0 mt-0.5`}),(0,G.jsx)(`span`,{children:n(o,s)})]})}var aAe=[{value:`Cool Plate`,labelKey:`slice.bedType.coolPlate`,fallback:`Cool Plate`},{value:`Cool Plate (SuperTack)`,labelKey:`slice.bedType.coolPlateSuperTack`,fallback:`Cool Plate SuperTack`},{value:`Engineering Plate`,labelKey:`slice.bedType.engineering`,fallback:`Engineering Plate`},{value:`High Temp Plate`,labelKey:`slice.bedType.highTemp`,fallback:`High Temp Plate`},{value:`Textured PEI Plate`,labelKey:`slice.bedType.texturedPEI`,fallback:`Textured PEI Plate`},{value:`Smooth PEI Plate`,labelKey:`slice.bedType.smoothPEI`,fallback:`Smooth PEI Plate`}];function oAe({value:e,onChange:t,disabled:n}){let{t:r}=U();return(0,G.jsxs)(`label`,{className:`block`,children:[(0,G.jsx)(`span`,{className:`block text-xs text-bambu-gray mb-1`,children:r(`slice.bedType.label`)}),(0,G.jsxs)(`select`,{value:e??``,onChange:e=>t(e.target.value===``?null:e.target.value),disabled:n,className:`flex-1 min-w-0 px-3 py-2 rounded-md bg-bambu-dark border border-bambu-dark-tertiary text-white text-sm focus:outline-none focus:border-bambu-gray disabled:opacity-50`,children:[(0,G.jsx)(`option`,{value:``,children:r(`slice.bedType.auto`)}),aAe.map(e=>(0,G.jsx)(`option`,{value:e.value,children:r(e.labelKey,e.fallback)},e.value))]})]})}function JG({label:e,slot:t,data:n,value:r,onChange:i,disabled:a,swatchColor:o,onSwatchColorChange:s,swatchColorLabel:c,selectedPrinterName:l,compatIndex:u}){let{t:d}=U(),[f,p]=(0,y.useState)(!1),m=(0,y.useId)(),h=`${m}-colour`,{sections:g,otherEntries:_}=(0,y.useMemo)(()=>{let e=[{key:`local`,label:`slice.tier.local`,fallback:`Imported`},{key:`orca_cloud`,label:`slice.tier.orcaCloud`,fallback:`Orca Cloud`},{key:`cloud`,label:`slice.tier.cloud`,fallback:`Bambu Cloud`},{key:`standard`,label:`slice.tier.standard`,fallback:`Standard`}],r=t!==`printer`,i=[],a=[],o=[];for(let{key:s,label:c,fallback:f}of e){let e=n[s][t];if(e.length>0&&a.push({tierLabel:d(c,f),entries:e}),!r){e.length>0&&i.push({tierLabel:d(c,f),entries:e});continue}let p=[];for(let n of e)LU(n,t,l??null,u??rOe)===`mismatch`?o.push(n):p.push(n);p.length>0&&i.push({tierLabel:d(c,f),entries:p})}return i.length===0&&o.length>0?{sections:a,otherEntries:[]}:{sections:i,otherEntries:o}},[n,t,d,l,u]),v=WG(r),b=(0,y.useMemo)(()=>f?_:_.filter(e=>`${e.source}:${e.id}`===v),[f,_,v]),x=_.length-b.length,S=g.reduce((e,t)=>e+t.entries.length,0)+b.length;return(0,G.jsxs)(`div`,{className:`block`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-xs text-bambu-gray mb-1`,children:[!s&&o&&(0,G.jsx)(`span`,{className:`inline-block w-3 h-3 rounded-full border border-bambu-dark-tertiary`,style:{backgroundColor:o},"aria-hidden":!0}),(0,G.jsx)(`label`,{htmlFor:m,children:e}),(x>0||f)&&(0,G.jsxs)(`span`,{className:`ml-auto flex items-center gap-1.5 font-normal`,children:[x>0&&(0,G.jsx)(`span`,{className:`text-bambu-gray/60`,children:d(`slice.presetsHidden`,`{{count}} hidden`,{count:x})}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>p(e=>!e),disabled:a,className:`text-bambu-green hover:underline disabled:opacity-50 disabled:no-underline`,children:f?d(`slice.showFewerPresets`,`Show fewer`):d(`slice.showAllPresets`,`Show all`)})]})]}),(0,G.jsxs)(`div`,{className:`flex items-stretch gap-2`,children:[(0,G.jsxs)(`select`,{id:m,value:WG(r),onChange:e=>i(tAe(e.target.value)),disabled:a||S===0,className:`w-full px-3 py-2 rounded-md bg-bambu-dark border border-bambu-dark-tertiary text-white text-sm focus:outline-none focus:border-bambu-gray disabled:opacity-50`,children:[(0,G.jsx)(`option`,{value:``,children:d(S===0?`slice.noPresetsForSlot`:`slice.selectPreset`)}),g.map(e=>(0,G.jsx)(`optgroup`,{label:e.tierLabel,children:e.entries.map(e=>(0,G.jsx)(`option`,{value:`${e.source}:${e.id}`,children:e.name},`${e.source}:${e.id}`))},e.tierLabel)),b.length>0&&(0,G.jsx)(`optgroup`,{label:d(`slice.otherPrinters`),children:b.map(e=>(0,G.jsx)(`option`,{value:`${e.source}:${e.id}`,children:e.name},`${e.source}:${e.id}`))})]}),s&&(0,G.jsxs)(`label`,{htmlFor:h,title:c,className:`flex items-center gap-2 px-2.5 rounded-md bg-bambu-dark border border-bambu-dark-tertiary text-sm ${a?`opacity-50 cursor-not-allowed`:`cursor-pointer hover:border-bambu-gray transition-colors`}`,children:[(0,G.jsx)(`input`,{id:h,type:`color`,value:GG(o),onChange:e=>s(e.target.value.toUpperCase()),disabled:a,"aria-label":c,style:{backgroundColor:GG(o)},className:`slice-colour-swatch w-4 h-4 shrink-0 rounded-full border border-bambu-dark-tertiary p-0 disabled:cursor-not-allowed enabled:cursor-pointer`}),(0,G.jsx)(`span`,{className:`font-mono text-xs text-white tracking-tight`,children:GG(o)})]})]})]})}function YG({source:e,onClose:t}){let{t:n}=U(),r=co(),{showToast:i}=Gd(),[a,o]=(0,y.useState)(null),[s,c]=(0,y.useState)(null),[l,u]=(0,y.useState)(1),{trackJob:d}=EG(),{data:f,isLoading:p}=K({queryKey:[`slicer-pipelines`],queryFn:()=>Z.listSlicerPipelines()}),{data:m}=K({queryKey:[`printers`],queryFn:()=>Z.getPrinters()}),{data:h}=K({queryKey:[`app-settings`],queryFn:()=>Z.getSettings()}),g=h?.pipeline_max_copies??50,_={kind:e.kind,id:e.id},v=q({mutationFn:e=>Z.checkPipelineEligibility(e,_)}),b=q({mutationFn:({pipelineId:e,force:t})=>Z.runPipeline(e,_,t,l),onSuccess:a=>{r.invalidateQueries({queryKey:[`slicer-pipelines`]}),r.invalidateQueries({queryKey:[`pipeline-runs`]}),a.slice_job_id&&d(a.slice_job_id,e.kind,e.filename),i(n(`library.runWithPipeline.toast.started`,`Pipeline run started`),`success`),t()},onError:e=>{i(e.message||n(`library.runWithPipeline.toast.failed`,`Could not start run`),`error`)}}),x=f?.pipelines??[],S=(m??[]).reduce((e,t)=>(e[t.id]=t,e),{});return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 bg-black/60 flex items-center justify-center p-4`,onClick:t,role:`dialog`,"aria-modal":`true`,"aria-label":n(`library.runWithPipeline.modalTitle`,`Run with pipeline`),children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-2xl w-full max-w-md max-h-[80vh] flex flex-col overflow-hidden`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-4 py-3 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`h3`,{className:`text-sm font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Ml,{className:`w-4 h-4 text-bambu-green`}),a&&s?n(`library.runWithPipeline.confirmTitle`,`Confirm run`):n(`library.runWithPipeline.modalTitle`,`Run with pipeline`)]}),(0,G.jsx)(`button`,{type:`button`,onClick:t,"aria-label":n(`common.close`,`Close`),className:`text-bambu-gray hover:text-white`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto p-4 space-y-3`,children:a&&s?(0,G.jsx)(cAe,{pipeline:a,report:s,source:e,onBack:()=>{o(null),c(null)},onConfirm:()=>{a&&b.mutate({pipelineId:a.id,force:!0})},running:b.isPending}):(0,G.jsx)(sAe,{source:e,pipelines:x,printerById:S,loading:p||v.isPending,onPick:async e=>{if(!(e.target_printer_id||e.target_kind===`printer_class`&&e.target_model_class)){i(n(`library.runWithPipeline.noTargetMessage`,`This pipeline has no target printer set. Open it in Settings to pick one.`),`error`);return}o(e);try{let t=await v.mutateAsync(e.id);c(t),t.ok&&b.mutate({pipelineId:e.id,force:!1})}catch{o(null)}},copies:l,maxCopies:g,onCopiesChange:u})})]})})}function sAe({source:e,pipelines:t,printerById:n,loading:r,onPick:i,copies:a,maxCopies:o,onCopiesChange:s}){let{t:c}=U();return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[c(`library.runWithPipeline.sourceHint`,`Source`),`:`,` `,(0,G.jsx)(`span`,{className:`text-white`,children:e.filename})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`label`,{className:`text-xs text-bambu-gray`,htmlFor:`run-pipeline-copies`,children:[c(`library.runWithPipeline.copies`,`Copies`),`:`]}),(0,G.jsx)(`input`,{id:`run-pipeline-copies`,type:`number`,min:1,max:o,value:a,onChange:e=>{let t=parseInt(e.target.value,10);Number.isNaN(t)||s(Math.max(1,Math.min(o,t)))},"aria-label":c(`library.runWithPipeline.copies`,`Copies`),className:`w-20 px-2 py-1 text-xs bg-bambu-dark border border-bambu-dark-tertiary rounded text-white`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray/60`,children:c(`library.runWithPipeline.copiesHint`,`max {{n}}`,{n:o})})]}),r&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),c(`library.runWithPipeline.loading`,`Loading…`)]}),!r&&t.length===0&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:c(`library.runWithPipeline.empty`,`No pipelines saved yet. Open the Slice dialog and click "Save as pipeline" to create one.`)}),!r&&t.length>0&&(0,G.jsx)(`ul`,{className:`space-y-1.5`,"aria-label":c(`library.runWithPipeline.pipelineListAria`,`Available pipelines`),children:t.map(e=>{let t=e.target_kind===`printer_class`,r=e.target_printer_id?n[e.target_printer_id]?.name:null,a=t&&e.target_model_class?c(`library.runWithPipeline.classTarget`,`Any {{model}}`,{model:e.target_model_class}):null;return(0,G.jsx)(`li`,{children:(0,G.jsxs)(`button`,{type:`button`,onClick:()=>i(e),disabled:!(e.target_printer_id||t&&e.target_model_class),className:`w-full text-left px-3 py-2 rounded-md border border-bambu-dark-tertiary bg-bambu-dark/40 hover:bg-bambu-dark-tertiary disabled:opacity-50 disabled:cursor-not-allowed transition-colors`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Rs,{className:`w-3.5 h-3.5 text-bambu-green flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm font-medium text-white truncate`,children:e.name})]}),(0,G.jsxs)(`div`,{className:`mt-1 text-xs text-bambu-gray flex items-center gap-1`,children:[(0,G.jsx)(Ll,{className:`w-3 h-3`}),a?(0,G.jsx)(`span`,{children:a}):r?(0,G.jsx)(`span`,{children:r}):(0,G.jsx)(`span`,{className:`text-amber-700 dark:text-amber-400`,children:c(`library.runWithPipeline.noTarget`,`No target printer set`)})]})]})},e.id)})})]})}function cAe({pipeline:e,report:t,source:n,onBack:r,onConfirm:i,running:a}){let{t:o}=U();return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray`,children:[(0,G.jsxs)(`p`,{children:[o(`library.runWithPipeline.confirmIntro`,`Pre-flight found issues with this run`),`:`]}),(0,G.jsxs)(`p`,{className:`mt-1`,children:[(0,G.jsxs)(`span`,{className:`text-bambu-gray/70`,children:[o(`library.runWithPipeline.sourceHint`,`Source`),`: `]}),(0,G.jsx)(`span`,{className:`text-white`,children:n.filename})]}),(0,G.jsxs)(`p`,{children:[(0,G.jsxs)(`span`,{className:`text-bambu-gray/70`,children:[o(`library.runWithPipeline.pipelineHint`,`Pipeline`),`: `]}),(0,G.jsx)(`span`,{className:`text-white`,children:e.name})]}),t.target_printer_name&&(0,G.jsxs)(`p`,{children:[(0,G.jsxs)(`span`,{className:`text-bambu-gray/70`,children:[o(`library.runWithPipeline.targetHint`,`Target`),`: `]}),(0,G.jsx)(`span`,{className:`text-white`,children:t.target_printer_name})]})]}),(0,G.jsx)(`ul`,{className:`space-y-1.5`,children:t.issues.map((e,t)=>(0,G.jsxs)(`li`,{className:`flex items-start gap-2 text-xs`,children:[(0,G.jsx)(Iu,{className:`w-3.5 h-3.5 text-amber-600 dark:text-amber-400 flex-shrink-0 mt-0.5`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:(0,G.jsx)(lAe,{issue:e})})]},t))}),(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-2 pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:r,disabled:a,className:`px-3 py-1.5 text-xs text-bambu-gray hover:text-white`,children:o(`common.back`,`Back`)}),(0,G.jsxs)(`button`,{type:`button`,onClick:i,disabled:a,className:`px-3 py-1.5 text-xs bg-amber-500 hover:bg-amber-600 text-white rounded disabled:opacity-50 flex items-center gap-1`,children:[a?(0,G.jsx)(Y,{className:`w-3 h-3 animate-spin`}):(0,G.jsx)(Ml,{className:`w-3 h-3`}),o(`library.runWithPipeline.runAnyway`,`Run anyway`)]})]})]})}function lAe({issue:e}){let{t}=U();switch(e.kind){case`printer_not_set`:return(0,G.jsx)(G.Fragment,{children:t(`library.runWithPipeline.issue.printerNotSet`,`No target printer set on this pipeline.`)});case`printer_not_found`:return(0,G.jsx)(G.Fragment,{children:t(`library.runWithPipeline.issue.printerNotFound`,`Target printer no longer exists.`)});case`printer_disabled`:return(0,G.jsx)(G.Fragment,{children:t(`library.runWithPipeline.issue.printerDisabled`,`Target printer is disabled.`)});case`printer_offline`:return(0,G.jsx)(G.Fragment,{children:t(`library.runWithPipeline.issue.printerOffline`,`Target printer is offline.`)});case`filament_type_mismatch`:return(0,G.jsx)(G.Fragment,{children:t(`library.runWithPipeline.issue.filamentType`,`Filament slot {{slot}}: expected {{expected}}, AMS has {{actual}}`,{slot:(e.slot_index??0)+1,expected:e.expected??`?`,actual:e.actual??`?`})});case`filament_color_mismatch`:return(0,G.jsx)(G.Fragment,{children:t(`library.runWithPipeline.issue.filamentColor`,`Filament slot {{slot}}: colour differs (expected {{expected}}, AMS has {{actual}})`,{slot:(e.slot_index??0)+1,expected:e.expected??`?`,actual:e.actual??`?`})});case`ams_slot_missing`:return(0,G.jsx)(G.Fragment,{children:t(`library.runWithPipeline.issue.amsSlotMissing`,`AMS slot {{slot}} not available on this printer`,{slot:(e.slot_index??0)+1})});case`filament_unverified`:return(0,G.jsx)(G.Fragment,{children:t(`library.runWithPipeline.issue.filamentUnverified`,`Filament slot {{slot}} comes from a cloud / standard preset and could not be statically verified.`,{slot:(e.slot_index??0)+1})});default:return(0,G.jsx)(G.Fragment,{children:e.kind})}}function XG(e,t){return e??t??`bambu_studio`}var ZG={bambu_studio:[`3mf`],orcaslicer:[`3mf`,`stl`,`step`,`stp`]};function QG(e){return ZG[e]??ZG.bambu_studio}var $G=[`3mf`,`stl`];function uAe(e,t){let n=(e||``).toLowerCase();return QG(t).includes(n)}function dAe(e,t){let n=e.toLowerCase();return n.endsWith(`.gcode`)||n.endsWith(`.gcode.3mf`)?!1:QG(t).some(e=>n.endsWith(`.${e}`))}function fAe(e){let t=e.toLowerCase();return t.endsWith(`.gcode`)||t.endsWith(`.gcode.3mf`)?!1:$G.some(e=>t.endsWith(`.${e}`))}function pAe(){let e=navigator.userAgent.toLowerCase(),t=navigator.platform?.toLowerCase()||``;return e.includes(`win`)||t.includes(`win`)?`windows`:e.includes(`mac`)||t.includes(`mac`)?`macos`:e.includes(`linux`)||t.includes(`linux`)?`linux`:`unknown`}function eK(e,t=`bambu_studio`){let n,r=encodeURIComponent(e);n=t===`orcaslicer`?`orcaslicer://open?file=${r}`:pAe()===`macos`?`bambustudioopen://${r}`:`bambustudio://open?file=${r}`;let i=document.createElement(`a`);i.href=n,i.style.display=`none`,document.body.appendChild(i),i.click(),document.body.removeChild(i)}function mAe(e){let t=(e||``).toLowerCase();return $G.includes(t)}var hAe=[[`projects`],[`project`],[`project-archives`],[`project-timeline`],[`project-file-progress`]];function gAe(e){return Promise.all(hAe.map(t=>e.invalidateQueries({queryKey:[...t]})))}function tK(e){return Promise.all([e.invalidateQueries({queryKey:[`archives`]}),gAe(e)])}function _Ae(e,t){if(t===void 0)return e;let n=new Set([t]),r=!0;for(;r;){r=!1;for(let t of e)t.parent_id!==null&&n.has(t.parent_id)&&!n.has(t.id)&&(n.add(t.id),r=!0)}return e.filter(e=>!n.has(e.id))}function nK(e,t){return e.filter(e=>e.status!==`archived`||e.id===t)}function rK({onFiles:e,onRejected:t,extensions:n,disabled:r=!1}){let[i,a]=(0,y.useState)(!1),o=(0,y.useRef)(e),s=(0,y.useRef)(t),c=(0,y.useRef)(n);(0,y.useEffect)(()=>{o.current=e},[e]),(0,y.useEffect)(()=>{s.current=t},[t]),(0,y.useEffect)(()=>{c.current=n},[n]);let l=(0,y.useCallback)(e=>{r||(e.preventDefault(),e.dataTransfer.types.includes(`Files`)&&a(!0))},[r]),u=(0,y.useCallback)(e=>{r||(e.preventDefault(),e.dataTransfer.types.includes(`Files`)&&a(!0))},[r]),d=(0,y.useCallback)(e=>{if(r)return;e.preventDefault();let t=e.currentTarget,n=e.relatedTarget;(!n||!t.contains(n))&&a(!1)},[r]),f=(0,y.useCallback)(e=>{if(r)return;e.preventDefault(),a(!1);let t=Array.from(e.dataTransfer.files);if(t.length===0)return;let n=c.current,i=n&&n.length>0?t.filter(e=>n.some(t=>e.name.toLowerCase().endsWith(t))):t;i.length>0?o.current(i):s.current?.()},[r]);return(0,y.useEffect)(()=>{if(!i)return;let e=()=>a(!1),t=t=>{t.key===`Escape`&&e()};return document.addEventListener(`drop`,e),document.addEventListener(`dragend`,e),document.addEventListener(`keydown`,t),()=>{document.removeEventListener(`drop`,e),document.removeEventListener(`dragend`,e),document.removeEventListener(`keydown`,t)}},[i]),{isDraggingOver:i,dragHandlers:{onDragOver:l,onDragEnter:u,onDragLeave:d,onDrop:f}}}function vAe({onClose:e,initialFiles:t}){let{t:n}=U(),r=co(),{showToast:i}=Gd(),a=(0,y.useRef)(null),[o,s]=(0,y.useState)(()=>t?.filter(e=>e.name.endsWith(`.3mf`)).map(e=>({file:e,status:`pending`}))||[]),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(null);(0,y.useEffect)(()=>{let t=t=>{t.key===`Escape`&&e()};return window.addEventListener(`keydown`,t),()=>window.removeEventListener(`keydown`,t)},[e]);let f=q({mutationFn:e=>Z.uploadArchivesBulk(e),onSuccess:e=>{d(e),r.invalidateQueries({queryKey:[`archives`]}),r.invalidateQueries({queryKey:[`archiveStats`]}),s(t=>t.map(t=>{let n=e.results.find(e=>e.filename===t.file.name),r=e.errors.find(e=>e.filename===t.file.name);return n?{...t,status:`success`,archiveId:n.id}:r?{...t,status:`error`,error:r.error}:t})),e.failed===0?i(`${e.uploaded} file${e.uploaded===1?``:`s`} uploaded`):e.uploaded===0?i(`Failed to upload ${e.failed} file${e.failed===1?``:`s`}`,`error`):i(`${e.uploaded} uploaded, ${e.failed} failed`,`warning`)},onError:()=>{s(e=>e.map(e=>({...e,status:`error`,error:`Upload failed`}))),i(`Upload failed`,`error`)}}),p=(0,y.useCallback)(e=>{e.preventDefault(),l(!0)},[]),m=(0,y.useCallback)(e=>{e.preventDefault(),l(!1)},[]),h=(0,y.useCallback)(e=>{e.preventDefault(),l(!1);let t=Array.from(e.dataTransfer.files).filter(e=>e.name.endsWith(`.3mf`));t.length>0&&s(e=>[...e,...t.map(e=>({file:e,status:`pending`}))])},[]),g=(0,y.useCallback)(e=>{let t=Array.from(e.target.files||[]).filter(e=>e.name.endsWith(`.3mf`));t.length>0&&s(e=>[...e,...t.map(e=>({file:e,status:`pending`}))]),a.current&&(a.current.value=``)},[]),_=(0,y.useCallback)(e=>{s(t=>t.filter((t,n)=>n!==e))},[]),v=()=>{if(o.length===0)return;let e=o.filter(e=>e.status===`pending`);e.length!==0&&(s(e=>e.map(e=>e.status===`pending`?{...e,status:`uploading`}:e)),f.mutate(e.map(e=>e.file)))},b=o.filter(e=>e.status===`pending`).length,x=f.isPending;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,children:(0,G.jsx)(Ld,{className:`w-full max-w-2xl max-h-[90vh] flex flex-col`,children:(0,G.jsxs)(zd,{className:`p-0 flex flex-col h-full`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`h2`,{className:`text-xl font-semibold text-white`,children:n(`uploadModal.title`)}),(0,G.jsx)(`button`,{onClick:e,className:`text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(`div`,{className:`p-4`,children:(0,G.jsxs)(`div`,{className:`border-2 border-dashed rounded-lg p-8 text-center transition-colors ${c?`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary hover:border-bambu-gray`}`,onDragOver:p,onDragLeave:m,onDrop:h,children:[(0,G.jsx)(Bu,{className:`w-12 h-12 mx-auto mb-4 text-bambu-gray`}),(0,G.jsx)(`p`,{className:`text-white mb-2`,children:n(`uploadModal.dragDrop`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm mb-4`,children:n(`uploadModal.or`)}),(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>a.current?.click(),disabled:x,children:n(`uploadModal.browseFiles`)}),(0,G.jsx)(`input`,{ref:a,type:`file`,accept:`.3mf`,multiple:!0,className:`hidden`,onChange:g})]})}),(0,G.jsx)(`div`,{className:`px-4 pb-4`,children:(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`uploadModal.extractionInfo`)})}),o.length>0&&(0,G.jsx)(`div`,{className:`px-4 pb-4 max-h-60 overflow-y-auto`,children:(0,G.jsx)(`div`,{className:`space-y-2`,children:o.map((e,t)=>(0,G.jsxs)(`div`,{className:`flex items-center gap-3 p-3 bg-bambu-dark rounded-lg`,children:[(0,G.jsx)(fc,{className:`w-5 h-5 text-bambu-gray flex-shrink-0`}),(0,G.jsx)(`span`,{className:`flex-1 text-white text-sm truncate`,children:e.file.name}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[(e.file.size/(1024*1024)).toFixed(1),` MB`]}),e.status===`pending`&&(0,G.jsx)(`button`,{onClick:()=>_(t),className:`text-bambu-gray hover:text-red-600 dark:hover:text-red-400 transition-colors`,disabled:x,children:(0,G.jsx)(td,{className:`w-4 h-4`})}),e.status===`uploading`&&(0,G.jsx)(Y,{className:`w-4 h-4 text-bambu-green animate-spin`}),e.status===`success`&&(0,G.jsx)(xs,{className:`w-4 h-4 text-bambu-green`}),e.status===`error`&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-xs text-red-700 dark:text-red-400`,children:e.error}),(0,G.jsx)(ys,{className:`w-4 h-4 text-red-600 dark:text-red-400`})]})]},`${e.file.name}-${t}`))})}),u&&(0,G.jsx)(`div`,{className:`px-4 pb-4`,children:(0,G.jsx)(`div`,{className:`p-3 bg-bambu-dark rounded-lg`,children:(0,G.jsxs)(`p`,{className:`text-sm text-white`,children:[(0,G.jsx)(`span`,{className:`text-bambu-green`,children:u.uploaded}),` `,n(`uploadModal.uploaded`),u.failed>0&&(0,G.jsxs)(G.Fragment,{children:[`, `,(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:u.failed}),` `,n(`uploadModal.failed`)]})]})})}),(0,G.jsxs)(`div`,{className:`flex gap-3 p-4 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:e,className:`flex-1`,children:n(u?`common.close`:`common.cancel`)}),!u&&(0,G.jsx)(Q,{onClick:v,disabled:b===0||x,className:`flex-1`,children:x?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),n(`uploadModal.uploading`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Bu,{className:`w-4 h-4`}),n(`uploadModal.upload`),` `,b>0&&`(${b})`]})})]})]})})})}var yAe=365;function bAe({onClose:e,initialDays:t}){let{t:n}=U(),r=co(),{showToast:i}=Gd(),[a,o]=(0,y.useState)(t??yAe),[s,c]=(0,y.useState)(!1),[l,u]=(0,y.useState)(a);(0,y.useEffect)(()=>{let e=window.setTimeout(()=>u(a),300);return()=>window.clearTimeout(e)},[a]);let d=K({queryKey:[`archive-purge-preview`,l,s],queryFn:()=>Z.previewArchivePurge(l,s),enabled:l>=1}),f=q({mutationFn:()=>Z.executeArchivePurge(a,s),onSuccess:t=>{i(n(`archivePurge.toast.success`,{count:t.deleted}),`success`),r.invalidateQueries({queryKey:[`archives`]}),r.invalidateQueries({queryKey:[`archive-stats`]}),e()},onError:e=>i(e.message||n(`archivePurge.toast.failed`),`error`)});(0,y.useEffect)(()=>{let t=t=>{t.key===`Escape`&&!f.isPending&&e()};return window.addEventListener(`keydown`,t),()=>window.removeEventListener(`keydown`,t)},[e,f.isPending]);let p=d.data,m=p?.count??0,h=p?.total_bytes??0,g=m>0&&!f.isPending;return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-white dark:bg-gray-900 rounded-lg shadow-xl max-w-lg w-full`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-gray-200 dark:border-gray-700`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-gray-900 dark:text-gray-100 flex items-center gap-2`,children:[(0,G.jsx)(Nu,{className:`w-5 h-5`}),n(`archivePurge.title`)]}),(0,G.jsx)(`button`,{onClick:e,className:`text-gray-400 hover:text-gray-600 dark:hover:text-gray-200`,"aria-label":n(`common.close`),disabled:f.isPending,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-gray-600 dark:text-gray-400`,children:n(`archivePurge.description`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`archive-purge-days`,className:`block text-sm font-medium text-gray-700 dark:text-gray-300 mb-1`,children:n(`archivePurge.ageLabel`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`input`,{id:`archive-purge-days`,type:`number`,min:1,max:3650,value:a,onChange:e=>o(Math.max(1,Math.min(3650,parseInt(e.target.value||`0`,10)||0))),className:`w-24 rounded border border-gray-300 dark:border-gray-600 bg-white dark:bg-gray-800 text-sm px-2 py-1 text-gray-900 dark:text-gray-100`}),(0,G.jsx)(`span`,{className:`text-sm text-gray-600 dark:text-gray-400`,children:n(`archivePurge.days`)})]})]}),(0,G.jsxs)(`div`,{className:`rounded border border-gray-200 dark:border-gray-700 bg-gray-50 dark:bg-gray-800/30 p-3`,children:[(0,G.jsx)(`div`,{className:`text-xs font-semibold uppercase tracking-wide text-gray-600 dark:text-gray-300 mb-2`,children:n(`archivePurge.effectsTitle`)}),(0,G.jsxs)(`ul`,{className:`text-xs text-gray-700 dark:text-gray-300 space-y-1 list-disc pl-4`,children:[(0,G.jsx)(`li`,{children:n(`archivePurge.effect1`)}),(0,G.jsx)(`li`,{children:n(`archivePurge.effect2`)}),(0,G.jsx)(`li`,{children:n(`archivePurge.effect3`)}),(0,G.jsx)(`li`,{children:n(`archivePurge.effect4`)})]})]}),(0,G.jsx)(`div`,{className:`rounded border border-gray-200 dark:border-gray-700 bg-gray-50 dark:bg-gray-800/50 p-3`,children:d.isLoading||d.isFetching?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-gray-500 dark:text-gray-400`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),` `,n(`archivePurge.previewLoading`)]}):d.isError?(0,G.jsx)(`div`,{className:`text-sm text-red-600 dark:text-red-400`,children:d.error?.message??n(`archivePurge.previewFailed`)}):(0,G.jsxs)(`div`,{className:`text-sm text-gray-900 dark:text-gray-100`,children:[(0,G.jsx)(`div`,{className:`font-medium`,children:n(`archivePurge.previewSummary`,{count:m,size:Ud(h)})}),p?.sample_filenames&&p.sample_filenames.length>0&&(0,G.jsxs)(`ul`,{className:`mt-2 text-xs text-gray-600 dark:text-gray-400 space-y-0.5 list-disc pl-4`,children:[p.sample_filenames.map(e=>(0,G.jsx)(`li`,{className:`truncate`,children:e},e)),m>p.sample_filenames.length&&(0,G.jsx)(`li`,{className:`list-none italic text-gray-500`,children:n(`archivePurge.andMore`,{count:m-p.sample_filenames.length})})]})]})}),(0,G.jsxs)(`label`,{className:`flex gap-2 items-start rounded border border-gray-200 dark:border-gray-700 px-3 py-2 cursor-pointer hover:bg-gray-50 dark:hover:bg-gray-800/50`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:s,onChange:e=>c(e.target.checked),disabled:f.isPending,className:`mt-0.5 shrink-0`}),(0,G.jsxs)(`span`,{className:`text-xs text-gray-700 dark:text-gray-300`,children:[(0,G.jsx)(`span`,{className:`font-medium block mb-0.5`,children:n(`archivePurge.purgeStatsLabel`)}),(0,G.jsx)(`span`,{className:`text-gray-500 dark:text-gray-400`,children:n(`archivePurge.purgeStatsHint`)})]})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 items-start text-xs text-amber-700 dark:text-amber-400 bg-amber-50 dark:bg-amber-900/20 rounded px-3 py-2`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 mt-0.5 shrink-0`}),(0,G.jsx)(`span`,{children:n(`archivePurge.warning`)})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 p-4 border-t border-gray-200 dark:border-gray-700`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:e,disabled:f.isPending,children:n(`common.cancel`)}),(0,G.jsx)(Q,{variant:`danger`,disabled:!g,onClick:()=>f.mutate(),children:f.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin mr-1`}),n(`archivePurge.purging`)]}):n(`archivePurge.confirmCta`,{count:m})})]})]})})}function xAe(e){if(!e||e<=0)return`—`;let t=Math.floor(e/3600),n=Math.floor(e%3600/60);return t>0?`${t}h ${n}m`:`${n}m`}function SAe(e){if(!e)return`—`;let t=ep(e);return t?t.toLocaleString():`—`}function iK({archiveId:e}){let{t}=U(),{data:n,isLoading:r}=K({queryKey:[`archive-runs`,e],queryFn:()=>Z.getArchiveRuns(e)});if(r)return(0,G.jsx)(`div`,{className:`flex justify-center py-4`,children:(0,G.jsx)(Y,{className:`w-5 h-5 text-bambu-gray animate-spin`})});let i=n?.items||[];return i.length===0?(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic py-2`,children:t(`archives.runLog.empty`)}):(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full text-xs`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`text-bambu-gray border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`th`,{className:`text-left py-1.5 pr-2 font-medium`,children:t(`archives.runLog.col.date`)}),(0,G.jsx)(`th`,{className:`text-left py-1.5 pr-2 font-medium`,children:t(`archives.runLog.col.status`)}),(0,G.jsx)(`th`,{className:`text-right py-1.5 pr-2 font-medium`,children:t(`archives.runLog.col.duration`)}),(0,G.jsx)(`th`,{className:`text-right py-1.5 pr-2 font-medium`,children:t(`archives.runLog.col.filament`)}),(0,G.jsx)(`th`,{className:`text-right py-1.5 font-medium`,children:t(`archives.runLog.col.cost`)})]})}),(0,G.jsx)(`tbody`,{children:i.map(e=>{let n=e.status===`completed`?`text-bambu-green`:e.status===`failed`?`text-red-700 dark:text-red-400`:`text-bambu-gray`;return(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/40 last:border-0`,children:[(0,G.jsx)(`td`,{className:`py-1.5 pr-2 text-bambu-gray-light`,children:SAe(e.started_at||e.created_at)}),(0,G.jsxs)(`td`,{className:`py-1.5 pr-2 font-medium ${n}`,children:[t(`archives.runLog.status.${e.status}`,{defaultValue:e.status}),e.failure_reason&&(0,G.jsx)(`span`,{className:`block text-[10px] text-bambu-gray font-normal`,children:t(`editArchive.failureReasons.${e.failure_reason}`,{defaultValue:e.failure_reason})})]}),(0,G.jsx)(`td`,{className:`py-1.5 pr-2 text-right text-bambu-gray-light`,children:xAe(e.duration_seconds)}),(0,G.jsx)(`td`,{className:`py-1.5 pr-2 text-right text-bambu-gray-light`,children:e.filament_used_grams==null?`—`:`${e.filament_used_grams.toFixed(1)} g`}),(0,G.jsx)(`td`,{className:`py-1.5 text-right text-bambu-gray-light`,children:e.cost==null?`—`:e.cost.toFixed(2)})]},e.id)})})]})})}var aK=[`adhesionFailure`,`spaghettiDetached`,`layerShift`,`cloggedNozzle`,`filamentRunout`,`warping`,`stringing`,`underExtrusion`,`powerFailure`,`userCancelled`,`noStatusUpdate`,`other`],CAe=[`completed`,`failed`,`aborted`,`printing`],oK=1e5;function sK({archive:e,onClose:t,existingTags:n=[]}){let{t:r}=U();(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&t()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[t]);let i=co(),[a,o]=(0,y.useState)(e.print_name||``),[s,c]=(0,y.useState)(e.printer_id),[l,u]=(0,y.useState)(e.project_id??null),[d,f]=(0,y.useState)(e.notes||``),[p,m]=(0,y.useState)(e.tags||``),[h,g]=(0,y.useState)(()=>{let t=e.failure_reason||``;return t?aK.includes(t)?t:aK.find(e=>r(`editArchive.failureReasons.${e}`)===t)||t:``}),_=h&&!aK.includes(h)?h:null,[v,b]=(0,y.useState)(e.status),[x,S]=(0,y.useState)(e.quantity??1),[C,w]=(0,y.useState)(e.filament_used_grams==null?``:String(e.filament_used_grams)),[T,E]=(0,y.useState)(e.photos||[]),[D,O]=(0,y.useState)(e.external_url||``),[k,A]=(0,y.useState)(!1),[j,M]=(0,y.useState)(!1),N=(0,y.useRef)(null),P=(0,y.useRef)(null),F=(0,y.useRef)(null),{data:I}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:L}=K({queryKey:[`projects`],queryFn:()=>Z.getProjects(),select:e=>[...e].sort((e,t)=>e.name.localeCompare(t.name))}),R=(0,y.useMemo)(()=>nK(L??[],e.project_id),[L,e.project_id]),{data:z}=K({queryKey:[`tags`],queryFn:Z.getTags,enabled:n.length===0}),B=n.length>0?n:z?.map(e=>e.name)||[],V=p.split(`,`).map(e=>e.trim()).filter(Boolean),ee=p.includes(`,`)?p.substring(p.lastIndexOf(`,`)+1).trim().toLowerCase():p.trim().toLowerCase(),te=B.filter(e=>!V.includes(e)&&(ee===``||e.toLowerCase().includes(ee))),ne=e=>{let t;t=ee&&!B.includes(ee)?p.includes(`,`)?p.substring(0,p.lastIndexOf(`,`)).split(`,`).map(e=>e.trim()).filter(Boolean):[]:V,t.includes(e)||m([...t,e].join(`, `)),F.current!==null&&clearTimeout(F.current),N.current?.focus()},re=e=>{m(V.filter(t=>t!==e).join(`, `))},ie=q({mutationFn:t=>Z.updateArchive(e.id,t),onSuccess:()=>{tK(i),i.invalidateQueries({queryKey:[`archive-runs`,e.id]}),t()}}),ae=async t=>{let n=t.target.files?.[0];if(n){A(!0);try{E((await Z.uploadArchivePhoto(e.id,n)).photos),i.invalidateQueries({queryKey:[`archives`]})}catch(e){console.error(`Failed to upload photo:`,e)}finally{A(!1),P.current&&(P.current.value=``)}}},oe=async t=>{try{E((await Z.deleteArchivePhoto(e.id,t)).photos||[]),i.invalidateQueries({queryKey:[`archives`]})}catch(e){console.error(`Failed to delete photo:`,e)}};return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:t,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-md max-h-[90vh] flex flex-col`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:r(`editArchive.title`)}),(0,G.jsx)(`button`,{onClick:t,className:`text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`form`,{onSubmit:t=>{t.preventDefault();let n={print_name:a||void 0,printer_id:s,project_id:l,notes:d||void 0,tags:p||void 0,quantity:x,external_url:D||null};v!==e.status&&(n.status=v);let r=C.trim(),i=r===``?null:Number(r),o=i!==null&&!Number.isFinite(i),c=i===null?null:Math.min(Math.max(i,0),oK),u=e.filament_used_grams??null;!o&&c!==u&&(n.filament_used_grams=c),v===`failed`||v===`aborted`?n.failure_reason=h||void 0:(e.status===`failed`||e.status===`aborted`)&&(n.failure_reason=null),ie.mutate(n)},className:`p-6 space-y-4 overflow-y-auto flex-1`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`archives.runLog.title`)}),(0,G.jsx)(iK,{archiveId:e.id})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`editArchive.name`)}),(0,G.jsx)(`input`,{type:`text`,value:a,onChange:e=>o(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,placeholder:r(`editArchive.namePlaceholder`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`editArchive.printer`)}),(0,G.jsxs)(`select`,{value:s??``,onChange:e=>c(e.target.value?Number(e.target.value):null),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:``,children:r(`editArchive.noPrinter`)}),I?.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[(0,G.jsx)(gc,{className:`w-4 h-4 inline mr-1`}),r(`editArchive.project`)]}),(0,G.jsxs)(`select`,{value:l??``,onChange:e=>u(e.target.value?Number(e.target.value):null),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:``,children:r(`editArchive.noProject`)}),R.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,htmlFor:`archive-items-printed`,children:[(0,G.jsx)(Pc,{className:`w-4 h-4 inline mr-1`}),r(`editArchive.itemsPrinted`)]}),(0,G.jsx)(`input`,{id:`archive-items-printed`,type:`number`,min:0,value:x,onChange:e=>S(Math.max(0,parseInt(e.target.value)||0)),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,placeholder:`1`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:r(`editArchive.itemsPrintedHelp`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,htmlFor:`archive-filament-grams`,children:[(0,G.jsx)(Yu,{className:`w-4 h-4 inline mr-1`}),r(`editArchive.filamentUsed`)]}),(0,G.jsx)(`input`,{id:`archive-filament-grams`,type:`text`,inputMode:`decimal`,value:C,onChange:e=>{let t=e.target.value.replace(`,`,`.`);(t===``||/^\d*\.?\d*$/.test(t))&&w(t)},onBlur:()=>w(e=>{let t=Number(e);return e===``||!Number.isFinite(t)?``:String(Math.min(t,oK))}),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,placeholder:r(`editArchive.filamentUsedPlaceholder`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:r(`editArchive.filamentUsedHelp`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`editArchive.notes`)}),(0,G.jsx)(`textarea`,{value:d,onChange:e=>f(e.target.value),rows:3,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none resize-none`,placeholder:r(`editArchive.notesPlaceholder`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[(0,G.jsx)(Xc,{className:`w-4 h-4 inline mr-1`}),r(`editArchive.externalLink`)]}),(0,G.jsx)(`input`,{type:`url`,value:D,onChange:e=>O(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,placeholder:`https://printables.com/model/...`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:r(`editArchive.externalLinkHelp`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`editArchive.tags`)}),V.length>0&&(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1.5 mb-2`,children:V.map(e=>(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 px-2 py-0.5 bg-bambu-dark-tertiary rounded text-sm text-white`,children:[(0,G.jsx)(Tu,{className:`w-3 h-3`}),e,(0,G.jsx)(`button`,{type:`button`,onClick:()=>re(e),className:`ml-0.5 text-bambu-gray hover:text-white`,children:(0,G.jsx)(td,{className:`w-3 h-3`})})]},e))}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`input`,{ref:N,type:`text`,value:p,onChange:e=>m(e.target.value),onFocus:()=>{F.current!==null&&clearTimeout(F.current),M(!0)},onBlur:()=>{F.current=window.setTimeout(()=>M(!1),200)},className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,placeholder:V.length>0?r(`editArchive.addMoreTags`):r(`editArchive.tagsPlaceholder`)}),j&&te.length>0&&(0,G.jsxs)(`div`,{className:`absolute top-full left-0 right-0 mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg z-10 max-h-40 overflow-y-auto`,children:[(0,G.jsxs)(`div`,{className:`p-2 text-xs text-bambu-gray border-b border-bambu-dark-tertiary`,children:[ee?r(`editArchive.matchingTags`,{query:ee}):r(`editArchive.existingTags`),` `,r(`editArchive.clickToAdd`)]}),(0,G.jsx)(`div`,{className:`p-2 flex flex-wrap gap-1.5`,children:te.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>ne(e),className:`px-2 py-0.5 bg-bambu-dark-tertiary hover:bg-bambu-green/20 rounded text-sm text-bambu-gray hover:text-white transition-colors`,children:e},e))})]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`editArchive.status`)}),(0,G.jsx)(`select`,{value:v,onChange:e=>{b(e.target.value),e.target.value===`completed`&&g(``)},className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:CAe.map(e=>(0,G.jsx)(`option`,{value:e,children:r(`editArchive.statuses.${e}`)},e))})]}),(v===`failed`||v===`aborted`)&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`failure-reason-select`,className:`block text-sm text-bambu-gray mb-1`,children:r(`editArchive.failureReason`)}),(0,G.jsxs)(`select`,{id:`failure-reason-select`,value:h,onChange:e=>g(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:``,children:r(`editArchive.selectReason`)}),aK.map(e=>(0,G.jsx)(`option`,{value:e,children:r(`editArchive.failureReasons.${e}`)},e)),_&&(0,G.jsx)(`option`,{value:_,children:_})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[(0,G.jsx)(ss,{className:`w-4 h-4 inline mr-1`}),r(`editArchive.photos`)]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-2 mb-2`,children:[T.map(t=>(0,G.jsxs)(`div`,{className:`relative group`,children:[(0,G.jsx)(`img`,{src:Z.getArchivePhotoUrl(e.id,t),alt:r(`editArchive.printResult`),className:`w-20 h-20 object-cover rounded-lg border border-bambu-dark-tertiary`}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>oe(t),className:`absolute -top-1 -right-1 p-1 bg-red-500 rounded-full can-hover:opacity-0 group-hover:opacity-100 focus-visible:opacity-100 transition-opacity`,children:(0,G.jsx)(Nu,{className:`w-3 h-3 text-white`})})]},t)),(0,G.jsxs)(`label`,{className:`w-20 h-20 flex items-center justify-center border-2 border-dashed border-bambu-dark-tertiary rounded-lg cursor-pointer hover:border-bambu-green transition-colors`,children:[(0,G.jsx)(`input`,{ref:P,type:`file`,accept:`image/jpeg,image/png,image/webp`,onChange:ae,className:`hidden`,disabled:k}),k?(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-gray animate-spin`}):(0,G.jsx)(Pl,{className:`w-6 h-6 text-bambu-gray`})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:r(`editArchive.photosHelp`)})]}),(0,G.jsxs)(`div`,{className:`flex gap-3 pt-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:t,className:`flex-1`,children:r(`common.cancel`)}),(0,G.jsxs)(Q,{type:`submit`,disabled:ie.isPending,className:`flex-1`,children:[(0,G.jsx)(Kl,{className:`w-4 h-4`}),ie.isPending?r(`common.saving`):r(`common.save`)]})]})]})]})})}function cK({archiveId:e,archiveName:t,onClose:n}){let{t:r}=U();return(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&n()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[n]),(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:n,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-2xl max-h-[85vh] flex flex-col`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 min-w-0`,children:[(0,G.jsx)(Rc,{className:`w-5 h-5 text-bambu-green flex-shrink-0`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white truncate`,title:t||``,children:r(`archives.runLog.modalTitle`,{name:t||r(`archives.runLog.modalTitleFallback`)})})]}),(0,G.jsx)(`button`,{onClick:n,className:`text-bambu-gray hover:text-white transition-colors`,title:r(`common.close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(`div`,{className:`p-6 overflow-y-auto flex-1`,children:(0,G.jsx)(iK,{archiveId:e})})]})})}function lK({isOpen:e,onClose:t,columns:n,defaultColumns:r,onSave:i}){let{t:a}=U(),[o,s]=(0,y.useState)(n),[c,l]=(0,y.useState)(null),u=(0,y.useRef)(null);if((0,y.useEffect)(()=>{e&&s(n.map(e=>({...e})))},[e,n]),(0,y.useEffect)(()=>{if(!e)return;let n=e=>{e.key===`Escape`&&t()};return window.addEventListener(`keydown`,n),()=>window.removeEventListener(`keydown`,n)},[e,t]),!e)return null;let d=e=>{s(t=>t.map((t,n)=>n===e?{...t,visible:!t.visible}:t))},f=(e,t)=>{t<0||t>=o.length||s(n=>{let r=[...n],[i]=r.splice(e,1);return r.splice(t,0,i),r})},p=(e,t)=>{u.current=t,l(t),e.dataTransfer.effectAllowed=`move`},m=(e,t)=>{e.preventDefault(),e.dataTransfer.dropEffect=`move`;let n=u.current;n!==null&&n!==t&&(f(n,t),u.current=t,l(t))},h=e=>{e.preventDefault()},g=()=>{u.current=null,l(null)},_=()=>{s(r.map(e=>({...e})))},v=()=>{i(o),t()},b=o.filter(e=>e.visible).length;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,onClick:t,children:(0,G.jsx)(Ld,{className:`w-full max-w-md max-h-[80vh] flex flex-col`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(zd,{className:`p-6 flex flex-col min-h-0`,children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white mb-2`,children:a(`inventory.configureColumns`)}),(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray mb-4`,children:[a(`inventory.configureColumnsDesc`),(0,G.jsxs)(`span`,{className:`ml-2 text-bambu-gray/60`,children:[`(`,b,` `,a(`inventory.of`),` `,o.length,` `,a(`inventory.visible`),`)`]})]}),(0,G.jsx)(`div`,{className:`space-y-1 overflow-y-auto flex-1 min-h-0 pr-1`,children:o.map((e,t)=>(0,G.jsxs)(`div`,{className:`flex items-center gap-2 p-2 rounded-lg border transition-colors ${c===t?`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary bg-bambu-dark-tertiary/50`} ${e.visible?``:`opacity-50`}`,draggable:!0,onDragStart:e=>p(e,t),onDragOver:e=>m(e,t),onDrop:h,onDragEnd:g,children:[(0,G.jsx)(`div`,{className:`cursor-grab text-bambu-gray/50 hover:text-bambu-gray`,children:(0,G.jsx)(Ac,{className:`w-4 h-4`})}),(0,G.jsx)(`span`,{className:`flex-1 font-medium text-sm text-white`,children:e.label}),(0,G.jsxs)(`div`,{className:`flex items-center gap-0.5`,children:[(0,G.jsx)(`button`,{onClick:()=>f(t,t-1),disabled:t===0,className:`p-1 rounded text-bambu-gray hover:bg-bambu-dark-secondary disabled:opacity-30 disabled:cursor-not-allowed`,title:a(`inventory.moveUp`),children:(0,G.jsx)(gs,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>f(t,t+1),disabled:t===o.length-1,className:`p-1 rounded text-bambu-gray hover:bg-bambu-dark-secondary disabled:opacity-30 disabled:cursor-not-allowed`,title:a(`inventory.moveDown`),children:(0,G.jsx)(ps,{className:`w-4 h-4`})})]}),(0,G.jsx)(`button`,{onClick:()=>d(t),className:`p-1.5 rounded transition-colors ${e.visible?`text-bambu-green hover:bg-bambu-green/10`:`text-bambu-gray/50 hover:bg-bambu-dark-secondary`}`,title:e.visible?a(`inventory.hideColumn`):a(`inventory.showColumn`),children:e.visible?(0,G.jsx)(ic,{className:`w-4 h-4`}):(0,G.jsx)(rc,{className:`w-4 h-4`})})]},e.id))}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mt-4 pt-4 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:_,className:`mr-auto`,children:[(0,G.jsx)(Ul,{className:`w-4 h-4`}),a(`inventory.reset`)]}),(0,G.jsx)(Q,{variant:`secondary`,onClick:t,children:a(`inventory.cancel`)}),(0,G.jsx)(Q,{onClick:v,children:a(`inventory.applyChanges`)})]})]})})})}function wAe({selectedIds:e,existingTags:t,onClose:n}){let r=co(),{showToast:i}=Gd(),[a,o]=(0,y.useState)(``),[s,c]=(0,y.useState)(new Set),[l,u]=(0,y.useState)(`add`);(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&n()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[n]);let d=q({mutationFn:async()=>{let t=Array.from(s),n=0;for(let r of e)try{let e=await Z.getArchive(r),i=e.tags?e.tags.split(`,`).map(e=>e.trim()).filter(Boolean):[],a;a=l===`add`?[...new Set([...i,...t])]:i.filter(e=>!s.has(e)),await Z.updateArchive(r,{tags:a.join(`, `)}),n++}catch(e){throw console.error(`Failed to update archive ${r}:`,e),Error(`Failed on archive ${r}: ${e instanceof Error?e.message:`Unknown error`}`)}return{count:n,mode:l,tags:t}},onSuccess:({count:e,mode:t,tags:a})=>{r.invalidateQueries({queryKey:[`archives`]}),i(`${t===`add`?`Added`:`Removed`} ${a.length} tag${a.length===1?``:`s`} ${t===`add`?`to`:`from`} ${e} archive${e===1?``:`s`}`),n()},onError:e=>{i(e.message||`Failed to update tags`,`error`)}}),f=e=>{c(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},p=()=>{a.trim()&&!s.has(a.trim())&&(c(e=>new Set([...e,a.trim()])),o(``))};return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,children:(0,G.jsx)(Ld,{className:`w-full max-w-md`,children:(0,G.jsxs)(zd,{className:`p-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Tu,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-xl font-semibold text-white`,children:l===`add`?`Add Tags`:`Remove Tags`})]}),(0,G.jsx)(`button`,{onClick:n,className:`text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-4`,children:[(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[l===`add`?`Add`:`Remove`,` tags for `,e.length,` selected archive`,e.length===1?``:`s`]}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Q,{size:`sm`,variant:l===`add`?`primary`:`secondary`,onClick:()=>u(`add`),children:`Add Tags`}),(0,G.jsx)(Q,{size:`sm`,variant:l===`remove`?`primary`:`secondary`,onClick:()=>u(`remove`),children:`Remove Tags`})]}),l===`add`&&(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`input`,{type:`text`,placeholder:`Enter new tag...`,className:`flex-1 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,value:a,onChange:e=>o(e.target.value),onKeyDown:e=>{e.key===`Enter`&&(e.preventDefault(),p())}}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:p,disabled:!a.trim(),children:(0,G.jsx)(Pl,{className:`w-4 h-4`})})]}),t.length>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:`Existing tags:`}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-2`,children:t.map(e=>(0,G.jsx)(`button`,{onClick:()=>f(e),className:`px-2 py-1 rounded text-sm transition-colors ${s.has(e)?`bg-bambu-green text-white`:`bg-bambu-dark-tertiary text-bambu-gray-light hover:bg-bambu-dark`}`,children:e},e))})]}),s.size>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:[`Tags to `,l===`add`?`add`:`remove`,`:`]}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-2`,children:Array.from(s).map(e=>(0,G.jsxs)(`span`,{className:`px-2 py-1 rounded text-sm flex items-center gap-1 ${l===`add`?`bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-400`:`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`}`,children:[e,(0,G.jsx)(`button`,{onClick:()=>f(e),className:`hover:opacity-70`,children:(0,G.jsx)(td,{className:`w-3 h-3`})})]},e))})]})]}),(0,G.jsxs)(`div`,{className:`flex gap-3 p-4 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:n,className:`flex-1`,children:`Cancel`}),(0,G.jsx)(Q,{onClick:()=>d.mutate(),disabled:s.size===0||d.isPending,className:`flex-1`,children:d.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),`Processing...`]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Tu,{className:`w-4 h-4`}),l===`add`?`Add Tags`:`Remove Tags`]})})]})]})})})}function TAe({selectedIds:e,onClose:t}){let{t:n}=U(),r=co(),{showToast:i}=Gd(),[a,o]=(0,y.useState)(``),{data:s,isLoading:c}=K({queryKey:[`projects`],queryFn:()=>Z.getProjects()}),l=(0,y.useMemo)(()=>s?nK([...s].sort((e,t)=>e.name.localeCompare(t.name))):void 0,[s]),u=a.trim().toLowerCase(),d=u?l?.filter(e=>e.name.toLowerCase().includes(u)):l,f=(l?.length??0)>5;(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&t()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[t]);let p=()=>tK(r),m=q({mutationFn:async t=>(await Z.addArchivesToProject(t,e),t),onSuccess:n=>{let r=s?.find(e=>e.id===n);p(),i(`Added ${e.length} archive${e.length===1?``:`s`} to "${r?.name}"`),t()},onError:()=>{i(`Failed to assign project`,`error`)}}),h=q({mutationFn:async()=>{for(let t of e)await Z.updateArchive(t,{project_id:null});return e.length},onSuccess:e=>{p(),i(`Removed ${e} archive${e===1?``:`s`} from project`),t()},onError:()=>{i(`Failed to remove from project`,`error`)}}),g=m.isPending||h.isPending;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,children:(0,G.jsx)(Ld,{className:`w-full max-w-md max-h-[80vh] flex flex-col`,children:(0,G.jsxs)(zd,{className:`p-0 flex flex-col min-h-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary shrink-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(gc,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-xl font-semibold text-white`,children:`Assign to Project`})]}),(0,G.jsx)(`button`,{onClick:t,className:`text-bambu-gray hover:text-white transition-colors`,disabled:g,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-3 overflow-y-auto min-h-0`,children:[(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[`Assign `,e.length,` selected archive`,e.length===1?``:`s`,` to a project`]}),c?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin text-bambu-gray`})}):(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`button`,{onClick:()=>h.mutate(),disabled:g,className:`w-full flex items-center gap-3 p-3 rounded-lg bg-bambu-dark hover:bg-bambu-dark-tertiary border border-bambu-dark-tertiary transition-colors text-left disabled:opacity-50`,children:[(0,G.jsx)(`div`,{className:`w-8 h-8 rounded-full bg-red-500/20 flex items-center justify-center shrink-0`,children:(0,G.jsx)(Ds,{className:`w-4 h-4 text-red-600 dark:text-red-400`})}),(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:`Remove from project`}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray truncate`,children:`Clear project assignment`})]}),h.isPending&&(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin text-bambu-gray shrink-0`})]}),l&&l.length>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 py-2`,children:[(0,G.jsx)(`div`,{className:`flex-1 h-px bg-bambu-dark-tertiary`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`or assign to`}),(0,G.jsx)(`div`,{className:`flex-1 h-px bg-bambu-dark-tertiary`})]}),f&&(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`}),(0,G.jsx)(`input`,{type:`text`,value:a,onChange:e=>o(e.target.value),placeholder:n(`archives.menu.searchProjects`),className:`w-full pl-9 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray text-sm focus:border-bambu-green focus:outline-none`})]}),d?.map(e=>(0,G.jsxs)(`button`,{onClick:()=>m.mutate(e.id),disabled:g,className:`w-full flex items-center gap-3 p-3 rounded-lg bg-bambu-dark hover:bg-bambu-dark-tertiary border border-bambu-dark-tertiary transition-colors text-left disabled:opacity-50`,children:[(0,G.jsx)(`div`,{className:`w-8 h-8 rounded-full flex items-center justify-center shrink-0`,style:{backgroundColor:e.color?`${e.color}20`:`rgb(var(--bambu-green) / 0.2)`},children:(0,G.jsx)(gc,{className:`w-4 h-4`,style:{color:e.color||`rgb(var(--bambu-green))`}})}),(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium truncate`,children:e.name}),(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray truncate`,children:[e.archive_count,` archive`,e.archive_count===1?``:`s`,e.status&&` • ${e.status}`]})]}),m.isPending&&m.variables===e.id&&(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin text-bambu-gray shrink-0`})]},e.id)),(!l||l.length===0)&&(0,G.jsx)(`p`,{className:`text-center text-bambu-gray py-4`,children:`No projects yet. Create one from the Projects page.`}),l&&l.length>0&&d?.length===0&&(0,G.jsx)(`p`,{className:`text-center text-bambu-gray text-sm py-4`,children:`—`})]})]}),(0,G.jsx)(`div`,{className:`flex gap-3 p-4 border-t border-bambu-dark-tertiary shrink-0`,children:(0,G.jsx)(Q,{variant:`secondary`,onClick:t,className:`flex-1`,disabled:g,children:`Cancel`})})]})})})}function EAe(e,t){return new Date(e,t+1,0).getDate()}function DAe(e,t){return new Date(e,t,1).getDay()}var OAe=[`January`,`February`,`March`,`April`,`May`,`June`,`July`,`August`,`September`,`October`,`November`,`December`],kAe=[`Sun`,`Mon`,`Tue`,`Wed`,`Thu`,`Fri`,`Sat`];function AAe({archives:e,onArchiveClick:t,highlightedArchiveId:n}){let r=new Date,[i,a]=(0,y.useState)(r.getMonth()),[o,s]=(0,y.useState)(r.getFullYear()),[c,l]=(0,y.useState)(null),[u,d]=(0,y.useState)(null),f=(0,y.useMemo)(()=>{let t=new Map;return e.forEach(e=>{let n=ep(e.completed_at||e.created_at)||new Date,r=`${n.getFullYear()}-${String(n.getMonth()+1).padStart(2,`0`)}-${String(n.getDate()).padStart(2,`0`)}`,i=t.get(r)||[];i.push(e),t.set(r,i)}),t},[e]),p=EAe(o,i),m=DAe(o,i),h=()=>{i===0?(a(11),s(o-1)):a(i-1)},g=()=>{i===11?(a(0),s(o+1)):a(i+1)},_=()=>{a(r.getMonth()),s(r.getFullYear())},v=[];for(let e=0;e<m;e++)v.push(null);for(let e=1;e<=p;e++)v.push(e);let b=c&&f.get(c)||[],x=e=>{e!==c&&d(null),l(e)};return(0,G.jsxs)(`div`,{className:`flex flex-col lg:flex-row gap-6`,children:[(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-4`,children:[(0,G.jsx)(`button`,{onClick:h,className:`p-2 hover:bg-bambu-dark-tertiary rounded-lg transition-colors`,children:(0,G.jsx)(hs,{className:`w-5 h-5 text-bambu-gray`})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white`,children:[OAe[i],` `,o]}),(0,G.jsx)(`button`,{onClick:_,className:`px-2 py-1 text-xs bg-bambu-dark-tertiary hover:bg-bambu-green/20 text-bambu-gray hover:text-white rounded transition-colors`,children:`Today`})]}),(0,G.jsx)(`button`,{onClick:g,className:`p-2 hover:bg-bambu-dark-tertiary rounded-lg transition-colors`,children:(0,G.jsx)(ms,{className:`w-5 h-5 text-bambu-gray`})})]}),(0,G.jsx)(`div`,{className:`grid grid-cols-7 gap-1 mb-1`,children:kAe.map(e=>(0,G.jsx)(`div`,{className:`text-center text-xs text-bambu-gray py-2`,children:e},e))}),(0,G.jsx)(`div`,{className:`grid grid-cols-7 gap-1`,children:v.map((e,t)=>{if(e===null)return(0,G.jsx)(`div`,{className:`aspect-square`},`empty-${t}`);let n=`${o}-${String(i+1).padStart(2,`0`)}-${String(e).padStart(2,`0`)}`,a=f.get(n)||[],s=a.length>0,l=e===r.getDate()&&i===r.getMonth()&&o===r.getFullYear(),u=n===c,d=a.filter(e=>e.status===`completed`).length,p=a.filter(e=>e.status===`failed`).length;return(0,G.jsxs)(`button`,{onClick:()=>x(u?null:n),className:`aspect-square rounded-lg p-1 flex flex-col items-center justify-center transition-colors relative ${u?`bg-bambu-green text-white`:l?`bg-bambu-green/20 text-white ring-2 ring-bambu-green`:s?`bg-bambu-dark-tertiary hover:bg-bambu-dark-tertiary/70 text-white`:`hover:bg-bambu-dark-tertiary/50 text-bambu-gray`}`,children:[(0,G.jsx)(`span`,{className:`text-sm font-medium ${l&&!u?`text-bambu-green`:``}`,children:e}),s&&(0,G.jsxs)(`div`,{className:`absolute bottom-1 left-1/2 -translate-x-1/2 flex items-center gap-1`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full ${p>0&&d===0?`bg-red-400`:p>0?`bg-yellow-400`:`bg-green-400`}`}),(0,G.jsx)(`span`,{className:`text-xs font-medium`,children:a.length})]})]},e)})}),(0,G.jsx)(`div`,{className:`mt-4 pt-4 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`grid grid-cols-3 gap-4 text-center`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-2xl font-bold text-white`,children:e.filter(e=>{let t=ep(e.completed_at||e.created_at)||new Date;return t.getMonth()===i&&t.getFullYear()===o}).length}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray`,children:`Prints this month`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-2xl font-bold text-green-700 dark:text-green-400`,children:e.filter(e=>{let t=ep(e.completed_at||e.created_at)||new Date;return t.getMonth()===i&&t.getFullYear()===o&&e.status===`completed`}).length}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray`,children:`Successful`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-2xl font-bold text-red-700 dark:text-red-400`,children:e.filter(e=>{let t=ep(e.completed_at||e.created_at)||new Date;return t.getMonth()===i&&t.getFullYear()===o&&e.status===`failed`}).length}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray`,children:`Failed`})]})]})})]}),(0,G.jsx)(`div`,{className:`lg:w-80 bg-bambu-dark rounded-xl p-4`,children:c?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-bambu-gray mb-3`,children:new Date(c+`T12:00:00`).toLocaleDateString(`en-US`,{weekday:`long`,month:`long`,day:`numeric`,year:`numeric`})}),b.length>0?(0,G.jsx)(`div`,{className:`calendar-scroll space-y-2 max-h-96 overflow-y-auto`,children:b.map(e=>{let r=e.id===u||e.id===n;return(0,G.jsxs)(`button`,{onClick:()=>{d(e.id),t?.(e)},className:`w-full flex items-center gap-3 p-2 rounded-lg transition-colors text-left ${r?``:`hover:bg-bambu-dark-tertiary`}`,style:r?{outline:`4px solid #facc15`,outlineOffset:`2px`}:void 0,children:[e.thumbnail_path?(0,G.jsx)(`img`,{src:Z.getArchiveThumbnail(e.id),alt:``,className:`w-12 h-12 rounded object-cover`}):(0,G.jsx)(`div`,{className:`w-12 h-12 rounded bg-bambu-dark-tertiary flex items-center justify-center`,children:(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`3MF`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white truncate`,children:e.print_name||e.filename}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-xs`,children:[(0,G.jsx)(`span`,{className:e.status===`failed`?`text-red-700 dark:text-red-400`:`text-green-700 dark:text-green-400`,children:e.status===`failed`?`Failed`:`Completed`}),e.filament_color&&(0,G.jsx)(`div`,{className:`flex gap-0.5`,children:e.filament_color.split(`,`).map((e,t)=>(0,G.jsx)(`div`,{className:`w-3 h-3 rounded-full border border-black/20`,style:{backgroundColor:e}},t))})]})]})]},e.id)})}):(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:`No prints on this day`})]}):(0,G.jsx)(`div`,{className:`text-center py-8`,children:(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:`Select a day to see prints`})})})]})}function uK({archiveId:e,archiveName:t,onClose:n}){let r=Z.getArchiveQRCodeUrl(e,300);return(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&n()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[n]),(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:n,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-sm`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:`QR Code`}),(0,G.jsx)(`button`,{onClick:n,className:`text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-6 flex flex-col items-center`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4 text-center truncate max-w-full`,children:t}),(0,G.jsx)(`div`,{className:`bg-white p-4 rounded-lg mb-4`,children:(0,G.jsx)(`img`,{src:r,alt:`QR Code`,className:`w-64 h-64`})}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-4 text-center`,children:`Scan to open this archive`}),(0,G.jsxs)(Q,{onClick:()=>{let e=document.createElement(`a`);e.href=r,e.download=`${t}_qrcode.png`,e.click()},className:`w-full`,children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),`Download QR Code`]})]})]})})}function dK({archiveId:e,archiveName:t,photos:n,onClose:r,onDelete:i}){let[a,o]=(0,y.useState)(0),[s,c]=(0,y.useState)(!1);if((0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&r(),e.key===`ArrowLeft`&&o(e=>Math.max(0,e-1)),e.key===`ArrowRight`&&o(e=>Math.min(n.length-1,e+1))};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[r,n.length]),(0,y.useEffect)(()=>{a>=n.length&&o(Math.max(0,n.length-1))},[n.length,a]),n.length===0)return r(),null;let l=n[a],u=Z.getArchivePhotoUrl(e,l);return(0,G.jsxs)(`div`,{className:`fixed inset-0 bg-black/90 flex items-center justify-center z-50`,onClick:r,children:[(0,G.jsxs)(`div`,{className:`relative w-full h-full flex flex-col`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 bg-black/50`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:t}),(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[`Photo `,a+1,` of `,n.length]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>{let e=document.createElement(`a`);e.href=u,e.download=`${t}_photo_${a+1}.jpg`,e.click()},children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),`Download`]}),i&&(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>{i&&c(!0)},className:`text-red-400 hover:text-red-300`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:r,className:`p-2 text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-6 h-6`})})]})]}),(0,G.jsxs)(`div`,{className:`flex-1 min-h-0 flex items-center justify-center p-4 relative overflow-hidden`,children:[a>0&&(0,G.jsx)(`button`,{onClick:()=>o(e=>e-1),className:`absolute left-4 z-10 p-3 bg-black/50 hover:bg-black/70 rounded-full transition-colors`,children:(0,G.jsx)(hs,{className:`w-8 h-8 text-white`})}),(0,G.jsx)(`img`,{src:u,alt:`Photo ${a+1}`,className:`max-w-full max-h-full object-contain rounded-lg`,style:{maxHeight:`calc(100vh - 200px)`}}),a<n.length-1&&(0,G.jsx)(`button`,{onClick:()=>o(e=>e+1),className:`absolute right-4 z-10 p-3 bg-black/50 hover:bg-black/70 rounded-full transition-colors`,children:(0,G.jsx)(ms,{className:`w-8 h-8 text-white`})})]}),n.length>1&&(0,G.jsx)(`div`,{className:`flex justify-center gap-2 p-4 bg-black/50`,children:n.map((t,n)=>(0,G.jsx)(`button`,{onClick:()=>o(n),className:`w-16 h-16 rounded-lg overflow-hidden border-2 transition-colors ${n===a?`border-bambu-green`:`border-transparent hover:border-bambu-gray`}`,children:(0,G.jsx)(`img`,{src:Z.getArchivePhotoUrl(e,t),alt:`Thumbnail ${n+1}`,className:`w-full h-full object-cover`})},t))})]}),s&&(0,G.jsx)(rf,{title:`Delete Photo`,message:`Delete this photo? This cannot be undone.`,confirmText:`Delete`,variant:`danger`,onConfirm:()=>{i?.(l),c(!1)},onCancel:()=>c(!1)})]})}function fK(e,t){(t==null||t>e.length)&&(t=e.length);for(var n=0,r=Array(t);n<t;n++)r[n]=e[n];return r}function jAe(e){if(Array.isArray(e))return e}function MAe(e,t){var n=e==null?null:typeof Symbol<`u`&&e[Symbol.iterator]||e[`@@iterator`];if(n!=null){var r,i,a,o,s=[],c=!0,l=!1;try{if(a=(n=n.call(e)).next,t!==0)for(;!(c=(r=a.call(n)).done)&&(s.push(r.value),s.length!==t);c=!0);}catch(e){l=!0,i=e}finally{try{if(!c&&n.return!=null&&(o=n.return(),Object(o)!==o))return}finally{if(l)throw i}}return s}}function NAe(){throw TypeError(`Invalid attempt to destructure non-iterable instance.
+In order to be iterable, non-array objects must have a [Symbol.iterator]() method.`)}function PAe(e,t){return jAe(e)||MAe(e,t)||FAe(e,t)||NAe()}function FAe(e,t){if(e){if(typeof e==`string`)return fK(e,t);var n={}.toString.call(e).slice(8,-1);return n===`Object`&&e.constructor&&(n=e.constructor.name),n===`Map`||n===`Set`?Array.from(e):n===`Arguments`||/^(?:Ui|I)nt(?:8|16|32)(?:Clamped)?Array$/.test(n)?fK(e,t):void 0}}var pK=Object.entries,mK=Object.setPrototypeOf,IAe=Object.isFrozen,LAe=Object.getPrototypeOf,RAe=Object.getOwnPropertyDescriptor,hK=Object.freeze,gK=Object.seal,_K=Object.create,vK=typeof Reflect<`u`&&Reflect,yK=vK.apply,bK=vK.construct;hK||=function(e){return e},gK||=function(e){return e},yK||=function(e,t){var n=[...arguments].slice(2);return e.apply(t,n)},bK||=function(e){return new e(...[...arguments].slice(1))};var xK=IK(Array.prototype.forEach),zAe=IK(Array.prototype.lastIndexOf),SK=IK(Array.prototype.pop),CK=IK(Array.prototype.push),BAe=IK(Array.prototype.splice),wK=Array.isArray,TK=IK(String.prototype.toLowerCase),EK=IK(String.prototype.toString),DK=IK(String.prototype.match),OK=IK(String.prototype.replace),kK=IK(String.prototype.indexOf),VAe=IK(String.prototype.trim),HAe=IK(Number.prototype.toString),UAe=IK(Boolean.prototype.toString),AK=typeof BigInt>`u`?null:IK(BigInt.prototype.toString),jK=typeof Symbol>`u`?null:IK(Symbol.prototype.toString),MK=IK(Object.prototype.hasOwnProperty),NK=IK(Object.prototype.toString),PK=IK(RegExp.prototype.test),FK=WAe(TypeError);function IK(e){return function(t){t instanceof RegExp&&(t.lastIndex=0);var n=[...arguments].slice(1);return yK(e,t,n)}}function WAe(e){return function(){return bK(e,[...arguments])}}function LK(e,t){let n=arguments.length>2&&arguments[2]!==void 0?arguments[2]:TK;if(mK&&mK(e,null),!wK(t))return e;let r=t.length;for(;r--;){let i=t[r];if(typeof i==`string`){let e=n(i);e!==i&&(IAe(t)||(t[r]=e),i=e)}e[i]=!0}return e}function GAe(e){for(let t=0;t<e.length;t++)MK(e,t)||(e[t]=null);return e}function RK(e){let t=_K(null);for(let r of pK(e)){var n=PAe(r,2);let i=n[0],a=n[1];MK(e,i)&&(wK(a)?t[i]=GAe(a):a&&typeof a==`object`&&a.constructor===Object?t[i]=RK(a):t[i]=a)}return t}function KAe(e){switch(typeof e){case`string`:return e;case`number`:return HAe(e);case`boolean`:return UAe(e);case`bigint`:return AK?AK(e):`0`;case`symbol`:return jK?jK(e):`Symbol()`;case`undefined`:return NK(e);case`function`:case`object`:{if(e===null)return NK(e);let t=e,n=zK(t,`toString`);if(typeof n==`function`){let e=n(t);return typeof e==`string`?e:NK(e)}return NK(e)}default:return NK(e)}}function zK(e,t){for(;e!==null;){let n=RAe(e,t);if(n){if(n.get)return IK(n.get);if(typeof n.value==`function`)return IK(n.value)}e=LAe(e)}function n(){return null}return n}function qAe(e){try{return PK(e,``),!0}catch{return!1}}var BK=hK(`a.abbr.acronym.address.area.article.aside.audio.b.bdi.bdo.big.blink.blockquote.body.br.button.canvas.caption.center.cite.code.col.colgroup.content.data.datalist.dd.decorator.del.details.dfn.dialog.dir.div.dl.dt.element.em.fieldset.figcaption.figure.font.footer.form.h1.h2.h3.h4.h5.h6.head.header.hgroup.hr.html.i.img.input.ins.kbd.label.legend.li.main.map.mark.marquee.menu.menuitem.meter.nav.nobr.ol.optgroup.option.output.p.picture.pre.progress.q.rp.rt.ruby.s.samp.search.section.select.shadow.slot.small.source.spacer.span.strike.strong.style.sub.summary.sup.table.tbody.td.template.textarea.tfoot.th.thead.time.tr.track.tt.u.ul.var.video.wbr`.split(`.`)),VK=hK(`svg.a.altglyph.altglyphdef.altglyphitem.animatecolor.animatemotion.animatetransform.circle.clippath.defs.desc.ellipse.enterkeyhint.exportparts.filter.font.g.glyph.glyphref.hkern.image.inputmode.line.lineargradient.marker.mask.metadata.mpath.part.path.pattern.polygon.polyline.radialgradient.rect.stop.style.switch.symbol.text.textpath.title.tref.tspan.view.vkern`.split(`.`)),HK=hK([`feBlend`,`feColorMatrix`,`feComponentTransfer`,`feComposite`,`feConvolveMatrix`,`feDiffuseLighting`,`feDisplacementMap`,`feDistantLight`,`feDropShadow`,`feFlood`,`feFuncA`,`feFuncB`,`feFuncG`,`feFuncR`,`feGaussianBlur`,`feImage`,`feMerge`,`feMergeNode`,`feMorphology`,`feOffset`,`fePointLight`,`feSpecularLighting`,`feSpotLight`,`feTile`,`feTurbulence`]),JAe=hK([`animate`,`color-profile`,`cursor`,`discard`,`font-face`,`font-face-format`,`font-face-name`,`font-face-src`,`font-face-uri`,`foreignobject`,`hatch`,`hatchpath`,`mesh`,`meshgradient`,`meshpatch`,`meshrow`,`missing-glyph`,`script`,`set`,`solidcolor`,`unknown`,`use`]),UK=hK(`math.menclose.merror.mfenced.mfrac.mglyph.mi.mlabeledtr.mmultiscripts.mn.mo.mover.mpadded.mphantom.mroot.mrow.ms.mspace.msqrt.mstyle.msub.msup.msubsup.mtable.mtd.mtext.mtr.munder.munderover.mprescripts`.split(`.`)),YAe=hK([`maction`,`maligngroup`,`malignmark`,`mlongdiv`,`mscarries`,`mscarry`,`msgroup`,`mstack`,`msline`,`msrow`,`semantics`,`annotation`,`annotation-xml`,`mprescripts`,`none`]),WK=hK([`#text`]),GK=hK(`accept.action.align.alt.autocapitalize.autocomplete.autopictureinpicture.autoplay.background.bgcolor.border.capture.cellpadding.cellspacing.checked.cite.class.clear.color.cols.colspan.command.commandfor.controls.controlslist.coords.crossorigin.datetime.decoding.default.dir.disabled.disablepictureinpicture.disableremoteplayback.download.draggable.enctype.enterkeyhint.exportparts.face.for.headers.height.hidden.high.href.hreflang.id.inert.inputmode.integrity.ismap.kind.label.lang.list.loading.loop.low.max.maxlength.media.method.min.minlength.multiple.muted.name.nonce.noshade.novalidate.nowrap.open.optimum.part.pattern.placeholder.playsinline.popover.popovertarget.popovertargetaction.poster.preload.pubdate.radiogroup.readonly.rel.required.rev.reversed.role.rows.rowspan.spellcheck.scope.selected.shape.size.sizes.slot.span.srclang.start.src.srcset.step.style.summary.tabindex.title.translate.type.usemap.valign.value.width.wrap.xmlns`.split(`.`)),KK=hK(`accent-height.accumulate.additive.alignment-baseline.amplitude.ascent.attributename.attributetype.azimuth.basefrequency.baseline-shift.begin.bias.by.class.clip.clippathunits.clip-path.clip-rule.color.color-interpolation.color-interpolation-filters.color-profile.color-rendering.cx.cy.d.dx.dy.diffuseconstant.direction.display.divisor.dominant-baseline.dur.edgemode.elevation.end.exponent.fill.fill-opacity.fill-rule.filter.filterunits.flood-color.flood-opacity.font-family.font-size.font-size-adjust.font-stretch.font-style.font-variant.font-weight.fx.fy.g1.g2.glyph-name.glyphref.gradientunits.gradienttransform.height.href.id.image-rendering.in.in2.intercept.k.k1.k2.k3.k4.kerning.keypoints.keysplines.keytimes.lang.lengthadjust.letter-spacing.kernelmatrix.kernelunitlength.lighting-color.local.marker-end.marker-mid.marker-start.markerheight.markerunits.markerwidth.maskcontentunits.maskunits.max.mask.mask-type.media.method.mode.min.name.numoctaves.offset.operator.opacity.order.orient.orientation.origin.overflow.paint-order.path.pathlength.patterncontentunits.patterntransform.patternunits.points.preservealpha.preserveaspectratio.primitiveunits.r.rx.ry.radius.refx.refy.repeatcount.repeatdur.restart.result.rotate.scale.seed.shape-rendering.slope.specularconstant.specularexponent.spreadmethod.startoffset.stddeviation.stitchtiles.stop-color.stop-opacity.stroke-dasharray.stroke-dashoffset.stroke-linecap.stroke-linejoin.stroke-miterlimit.stroke-opacity.stroke.stroke-width.style.surfacescale.systemlanguage.tabindex.tablevalues.targetx.targety.transform.transform-origin.text-anchor.text-decoration.text-orientation.text-rendering.textlength.type.u1.u2.unicode.values.viewbox.visibility.version.vert-adv-y.vert-origin-x.vert-origin-y.width.word-spacing.wrap.writing-mode.xchannelselector.ychannelselector.x.x1.x2.xmlns.y.y1.y2.z.zoomandpan`.split(`.`)),qK=hK(`accent.accentunder.align.bevelled.close.columnalign.columnlines.columnspacing.columnspan.denomalign.depth.dir.display.displaystyle.encoding.fence.frame.height.href.id.largeop.length.linethickness.lquote.lspace.mathbackground.mathcolor.mathsize.mathvariant.maxsize.minsize.movablelimits.notation.numalign.open.rowalign.rowlines.rowspacing.rowspan.rspace.rquote.scriptlevel.scriptminsize.scriptsizemultiplier.selection.separator.separators.stretchy.subscriptshift.supscriptshift.symmetric.voffset.width.xmlns`.split(`.`)),JK=hK([`xlink:href`,`xml:id`,`xlink:title`,`xml:space`,`xmlns:xlink`]),XAe=gK(/{{[\w\W]*|^[\w\W]*}}/g),ZAe=gK(/<%[\w\W]*|^[\w\W]*%>/g),QAe=gK(/\${[\w\W]*/g),$Ae=gK(/^data-[\-\w.\u00B7-\uFFFF]+$/),eje=gK(/^aria-[\-\w]+$/),YK=gK(/^(?:(?:(?:f|ht)tps?|mailto|tel|callto|sms|cid|xmpp|matrix):|[^a-z]|[a-z+.\-]+(?:[^a-z+.\-:]|$))/i),tje=gK(/^(?:\w+script|data):/i),nje=gK(/[\u0000-\u0020\u00A0\u1680\u180E\u2000-\u2029\u205F\u3000]/g),rje=gK(/^html$/i),ije=gK(/^[a-z][.\w]*(-[.\w]+)+$/i),XK=gK(/<[/\w!]/g),ZK=gK(/<[/\w]/g),aje=gK(/<\/no(script|embed|frames)/i),oje=gK(/\/>/i),QK={element:1,attribute:2,text:3,cdataSection:4,entityReference:5,entityNode:6,processingInstruction:7,comment:8,document:9,documentType:10,documentFragment:11,notation:12},sje=function(){return typeof window>`u`?null:window},cje=function(e,t){if(typeof e!=`object`||typeof e.createPolicy!=`function`)return null;let n=null,r=`data-tt-policy-suffix`;t&&t.hasAttribute(r)&&(n=t.getAttribute(r));let i=`dompurify`+(n?`#`+n:``);try{return e.createPolicy(i,{createHTML(e){return e},createScriptURL(e){return e}})}catch{return console.warn(`TrustedTypes policy `+i+` could not be created.`),null}},$K=function(){return{afterSanitizeAttributes:[],afterSanitizeElements:[],afterSanitizeShadowDOM:[],beforeSanitizeAttributes:[],beforeSanitizeElements:[],beforeSanitizeShadowDOM:[],uponSanitizeAttribute:[],uponSanitizeElement:[],uponSanitizeShadowNode:[]}},eq=function(e,t,n,r){return MK(e,t)&&wK(e[t])?LK(r.base?RK(r.base):{},e[t],r.transform):n};function tq(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:sje(),t=e=>tq(e);if(t.version=`3.4.13`,t.removed=[],!e||!e.document||e.document.nodeType!==QK.document||!e.Element)return t.isSupported=!1,t;let n=e.document,r=n,i=r.currentScript;e.DocumentFragment;let a=e.HTMLTemplateElement,o=e.Node,s=e.Element,c=e.NodeFilter;e.NamedNodeMap===void 0&&(e.NamedNodeMap||e.MozNamedAttrMap),e.HTMLFormElement;let l=e.DOMParser,u=e.trustedTypes,d=s.prototype,f=zK(d,`cloneNode`),p=zK(d,`remove`),m=zK(d,`nextSibling`),h=zK(d,`childNodes`),g=zK(d,`parentNode`),_=zK(d,`shadowRoot`),v=zK(d,`attributes`),y=o&&o.prototype?zK(o.prototype,`nodeType`):null,b=o&&o.prototype?zK(o.prototype,`nodeName`):null,x=o&&o.prototype?zK(o.prototype,`ownerDocument`):null;if(typeof a==`function`){let e=n.createElement(`template`);e.content&&e.content.ownerDocument&&(n=e.content.ownerDocument)}let S,C=``,w,T=!1,E=0,D=function(){if(E>0)throw FK(`A configured TRUSTED_TYPES_POLICY callback (createHTML or createScriptURL) must not call DOMPurify.sanitize, as that causes infinite recursion. Do not pass a policy whose callbacks wrap DOMPurify as TRUSTED_TYPES_POLICY; see the "DOMPurify and Trusted Types" section of the README.`)},O=function(e){D(),E++;try{return S.createHTML(e)}finally{E--}},k=function(e){D(),E++;try{return S.createScriptURL(e)}finally{E--}},A=function(){return T||=(w=cje(u,i),!0),w},j=n,M=j.implementation,N=j.createNodeIterator,P=j.createDocumentFragment,F=j.getElementsByTagName,I=r.importNode,L=$K();t.isSupported=typeof pK==`function`&&typeof g==`function`&&M&&M.createHTMLDocument!==void 0;let R=XAe,z=ZAe,B=QAe,V=$Ae,ee=eje,te=tje,ne=nje,re=ije,ie=YK,ae=null,oe=LK({},[...BK,...VK,...HK,...UK,...WK]),se=null,H=LK({},[...GK,...KK,...qK,...JK]),ce=Object.seal(_K(null,{tagNameCheck:{writable:!0,configurable:!1,enumerable:!0,value:null},attributeNameCheck:{writable:!0,configurable:!1,enumerable:!0,value:null},allowCustomizedBuiltInElements:{writable:!0,configurable:!1,enumerable:!0,value:!1}})),le=null,ue=null,de=Object.seal(_K(null,{tagCheck:{writable:!0,configurable:!1,enumerable:!0,value:null},attributeCheck:{writable:!0,configurable:!1,enumerable:!0,value:null}})),fe=!0,pe=!0,me=!1,he=!0,ge=!1,_e=!0,ve=!1,ye=!1,be=null,xe=null,Se=!1,Ce=!1,we=!1,Te=!1,Ee=!0,De=!1,Oe=`user-content-`,ke=!0,Ae=!1,je={},Me=null,Ne=LK({},`annotation-xml.audio.colgroup.desc.foreignobject.head.iframe.math.mi.mn.mo.ms.mtext.noembed.noframes.noscript.plaintext.script.selectedcontent.style.svg.template.thead.title.video.xmp`.split(`.`)),Pe=null,Fe=LK({},[`audio`,`video`,`img`,`source`,`image`,`track`]),Ie=null,Le=LK({},[`alt`,`class`,`for`,`id`,`label`,`name`,`pattern`,`placeholder`,`role`,`summary`,`title`,`value`,`style`,`xmlns`]),Re=`http://www.w3.org/1998/Math/MathML`,ze=`http://www.w3.org/2000/svg`,Be=`http://www.w3.org/1999/xhtml`,Ve=Be,He=!1,Ue=null,We=LK({},[Re,ze,Be],EK),Ge=hK([`mi`,`mo`,`mn`,`ms`,`mtext`]),Ke=LK({},Ge),qe=hK([`annotation-xml`]),Je=LK({},qe),Ye=LK({},[`title`,`style`,`font`,`a`,`script`]),Xe=null,Ze=[`application/xhtml+xml`,`text/html`],Qe=null,$e=null,et=n.createElement(`form`),U=function(e){return e instanceof RegExp||e instanceof Function},tt=function(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:{};if($e&&$e===e)return;(!e||typeof e!=`object`)&&(e={}),e=RK(e),Xe=Ze.indexOf(e.PARSER_MEDIA_TYPE)===-1?`text/html`:e.PARSER_MEDIA_TYPE,Qe=Xe===`application/xhtml+xml`?EK:TK,ae=eq(e,`ALLOWED_TAGS`,oe,{transform:Qe}),se=eq(e,`ALLOWED_ATTR`,H,{transform:Qe}),Ue=eq(e,`ALLOWED_NAMESPACES`,We,{transform:EK}),Ie=eq(e,`ADD_URI_SAFE_ATTR`,Le,{transform:Qe,base:Le}),Pe=eq(e,`ADD_DATA_URI_TAGS`,Fe,{transform:Qe,base:Fe}),Me=eq(e,`FORBID_CONTENTS`,Ne,{transform:Qe}),le=eq(e,`FORBID_TAGS`,RK({}),{transform:Qe}),ue=eq(e,`FORBID_ATTR`,RK({}),{transform:Qe}),je=MK(e,`USE_PROFILES`)?e.USE_PROFILES&&typeof e.USE_PROFILES==`object`?RK(e.USE_PROFILES):e.USE_PROFILES:!1,fe=e.ALLOW_ARIA_ATTR!==!1,pe=e.ALLOW_DATA_ATTR!==!1,me=e.ALLOW_UNKNOWN_PROTOCOLS||!1,he=e.ALLOW_SELF_CLOSE_IN_ATTR!==!1,ge=e.SAFE_FOR_TEMPLATES||!1,_e=e.SAFE_FOR_XML!==!1,ve=e.WHOLE_DOCUMENT||!1,Ce=e.RETURN_DOM||!1,we=e.RETURN_DOM_FRAGMENT||!1,Te=e.RETURN_TRUSTED_TYPE||!1,Se=e.FORCE_BODY||!1,Ee=e.SANITIZE_DOM!==!1,De=e.SANITIZE_NAMED_PROPS||!1,ke=e.KEEP_CONTENT!==!1,Ae=e.IN_PLACE||!1,ie=qAe(e.ALLOWED_URI_REGEXP)?e.ALLOWED_URI_REGEXP:YK,Ve=typeof e.NAMESPACE==`string`?e.NAMESPACE:Be,Ke=MK(e,`MATHML_TEXT_INTEGRATION_POINTS`)&&e.MATHML_TEXT_INTEGRATION_POINTS&&typeof e.MATHML_TEXT_INTEGRATION_POINTS==`object`?RK(e.MATHML_TEXT_INTEGRATION_POINTS):LK({},Ge),Je=MK(e,`HTML_INTEGRATION_POINTS`)&&e.HTML_INTEGRATION_POINTS&&typeof e.HTML_INTEGRATION_POINTS==`object`?RK(e.HTML_INTEGRATION_POINTS):LK({},qe);let t=MK(e,`CUSTOM_ELEMENT_HANDLING`)&&e.CUSTOM_ELEMENT_HANDLING&&typeof e.CUSTOM_ELEMENT_HANDLING==`object`?RK(e.CUSTOM_ELEMENT_HANDLING):_K(null);if(ce=_K(null),MK(t,`tagNameCheck`)&&U(t.tagNameCheck)&&(ce.tagNameCheck=t.tagNameCheck),MK(t,`attributeNameCheck`)&&U(t.attributeNameCheck)&&(ce.attributeNameCheck=t.attributeNameCheck),MK(t,`allowCustomizedBuiltInElements`)&&typeof t.allowCustomizedBuiltInElements==`boolean`&&(ce.allowCustomizedBuiltInElements=t.allowCustomizedBuiltInElements),gK(ce),ge&&(pe=!1),we&&(Ce=!0),je&&(ae=LK({},WK),se=_K(null),je.html===!0&&(LK(ae,BK),LK(se,GK)),je.svg===!0&&(LK(ae,VK),LK(se,KK),LK(se,JK)),je.svgFilters===!0&&(LK(ae,HK),LK(se,KK),LK(se,JK)),je.mathMl===!0&&(LK(ae,UK),LK(se,qK),LK(se,JK))),de.tagCheck=null,de.attributeCheck=null,MK(e,`ADD_TAGS`)&&(typeof e.ADD_TAGS==`function`?de.tagCheck=e.ADD_TAGS:wK(e.ADD_TAGS)&&(ae===oe&&(ae=RK(ae)),LK(ae,e.ADD_TAGS,Qe))),MK(e,`ADD_ATTR`)&&(typeof e.ADD_ATTR==`function`?de.attributeCheck=e.ADD_ATTR:wK(e.ADD_ATTR)&&(se===H&&(se=RK(se)),LK(se,e.ADD_ATTR,Qe))),MK(e,`ADD_URI_SAFE_ATTR`)&&wK(e.ADD_URI_SAFE_ATTR)&&LK(Ie,e.ADD_URI_SAFE_ATTR,Qe),MK(e,`FORBID_CONTENTS`)&&wK(e.FORBID_CONTENTS)&&(Me===Ne&&(Me=RK(Me)),LK(Me,e.FORBID_CONTENTS,Qe)),MK(e,`ADD_FORBID_CONTENTS`)&&wK(e.ADD_FORBID_CONTENTS)&&(Me===Ne&&(Me=RK(Me)),LK(Me,e.ADD_FORBID_CONTENTS,Qe)),ke&&(ae[`#text`]=!0),ve&&LK(ae,[`html`,`head`,`body`]),ae.table&&(LK(ae,[`tbody`]),delete le.tbody),e.TRUSTED_TYPES_POLICY){if(typeof e.TRUSTED_TYPES_POLICY.createHTML!=`function`)throw FK(`TRUSTED_TYPES_POLICY configuration option must provide a "createHTML" hook.`);if(typeof e.TRUSTED_TYPES_POLICY.createScriptURL!=`function`)throw FK(`TRUSTED_TYPES_POLICY configuration option must provide a "createScriptURL" hook.`);let t=S;S=e.TRUSTED_TYPES_POLICY;try{C=O(``)}catch(e){throw S=t,e}}else e.TRUSTED_TYPES_POLICY===null?(S=void 0,C=``):(S===void 0&&(S=A()),S&&typeof C==`string`&&(C=O(``)));hK&&hK(e),$e=e},nt=LK({},[...VK,...HK,...JAe]),rt=LK({},[...UK,...YAe]),it=function(e,t,n){return t.namespaceURI===Be?e===`svg`:t.namespaceURI===Re?e===`svg`&&(n===`annotation-xml`||Ke[n]):!!nt[e]},at=function(e,t,n){return t.namespaceURI===Be?e===`math`:t.namespaceURI===ze?e===`math`&&Je[n]:!!rt[e]},ot=function(e,t,n){return t.namespaceURI===ze&&!Je[n]||t.namespaceURI===Re&&!Ke[n]?!1:!rt[e]&&(Ye[e]||!nt[e])},st=function(e){let t=g(e);(!t||!t.tagName)&&(t={namespaceURI:Ve,tagName:`template`});let n=TK(e.tagName),r=TK(t.tagName);return Ue[e.namespaceURI]?e.namespaceURI===ze?it(n,t,r):e.namespaceURI===Re?at(n,t,r):e.namespaceURI===Be?ot(n,t,r):!!(Xe===`application/xhtml+xml`&&Ue[e.namespaceURI]):!1},ct=function(e){CK(t.removed,{element:e});try{g(e).removeChild(e)}catch{if(p(e),!g(e))throw FK(`a node selected for removal could not be detached from its tree and cannot be safely returned; refusing to sanitize in place`)}},lt=function(e){ft(e);let t=h(e);if(t){let e=[];xK(t,t=>{CK(e,t)}),xK(e,e=>{try{p(e)}catch{}})}let n=v(e);if(n)for(let t=n.length-1;t>=0;--t){let r=n[t],i=r&&r.name;if(typeof i==`string`)try{e.removeAttribute(i)}catch{}}},ut=function(e,n){try{CK(t.removed,{attribute:n.getAttributeNode(e),from:n})}catch{CK(t.removed,{attribute:null,from:n})}if(n.removeAttribute(e),e===`is`)if(Ce||we)try{ct(n)}catch{}else try{n.setAttribute(e,``)}catch{}},dt=function(e){let t=v(e);if(t)for(let n=t.length-1;n>=0;--n){let r=t[n],i=r&&r.name;if(!(typeof i!=`string`||se[Qe(i)]))try{e.removeAttribute(i)}catch{}}},ft=function(e){let t=[e];for(;t.length>0;){let e=t.pop();(y?y(e):e.nodeType)===QK.element&&dt(e);let n=h(e);if(n)for(let e=n.length-1;e>=0;--e)t.push(n[e])}},pt=function(e){if(!_e)return;let t=[e];for(;t.length>0;){let e=t.pop(),n=y?y(e):e.nodeType;if(n===QK.processingInstruction||n===QK.comment&&PK(ZK,e.data)){try{p(e)}catch{}continue}if(n===QK.element){let t=e,n=Qe(b?b(e):e.nodeName);try{t.hasAttribute&&t.hasAttribute(`patchsrc`)&&t.removeAttribute(`patchsrc`),t.hasAttribute&&t.hasAttribute(`for`)&&n!==`label`&&n!==`output`&&t.removeAttribute(`for`)}catch{}}let r=h(e);if(r)for(let e=r.length-1;e>=0;--e)t.push(r[e])}},mt=function(e){let t=null,r=null;if(Se)e=`<remove></remove>`+e;else{let t=DK(e,/^[\r\n\t ]+/);r=t&&t[0]}Xe===`application/xhtml+xml`&&Ve===Be&&(e=`<html xmlns="http://www.w3.org/1999/xhtml"><head></head><body>`+e+`</body></html>`);let i=S?O(e):e;if(Ve===Be)try{t=new l().parseFromString(i,Xe)}catch{}if(!t||!t.documentElement){t=M.createDocument(Ve,`template`,null);try{t.documentElement.innerHTML=He?C:i}catch{}}let a=t.body||t.documentElement;return e&&r&&a.insertBefore(n.createTextNode(r),a.childNodes[0]||null),Ve===Be?F.call(t,ve?`html`:`body`)[0]:ve?t.documentElement:a},ht=function(e){let t=x?x(e):e.ownerDocument;return N.call(t||e,e,c.SHOW_ELEMENT|c.SHOW_COMMENT|c.SHOW_TEXT|c.SHOW_PROCESSING_INSTRUCTION|c.SHOW_CDATA_SECTION,null)},gt=function(e){return e=OK(e,R,` `),e=OK(e,z,` `),e=OK(e,B,` `),e},_t=function(e){e.normalize();let t=x?x(e):e.ownerDocument,n=N.call(t||e,e,c.SHOW_TEXT|c.SHOW_COMMENT|c.SHOW_CDATA_SECTION|c.SHOW_PROCESSING_INSTRUCTION,null),r=n.nextNode();for(;r;)r.data=gt(r.data),r=n.nextNode();let i=e.querySelectorAll?.call(e,`template`);i&&xK(i,e=>{yt(e.content)&&_t(e.content)})},vt=function(e){let t=b?b(e):null;return typeof t!=`string`||Qe(t)!==`form`?!1:typeof e.nodeName!=`string`||typeof e.textContent!=`string`||typeof e.removeChild!=`function`||e.attributes!==v(e)||typeof e.removeAttribute!=`function`||typeof e.setAttribute!=`function`||typeof e.namespaceURI!=`string`||typeof e.insertBefore!=`function`||typeof e.hasChildNodes!=`function`||e.nodeType!==y(e)||e.childNodes!==h(e)},yt=function(e){if(!y||typeof e!=`object`||!e)return!1;try{return y(e)===QK.documentFragment}catch{return!1}},bt=function(e){if(!y||typeof e!=`object`||!e)return!1;try{return typeof y(e)==`number`}catch{return!1}};function xt(e,n,r){e.length!==0&&xK(e,e=>{e.call(t,n,r,$e)})}let St=function(e,t){return!!(_e&&e.hasChildNodes()&&!bt(e.firstElementChild)&&PK(XK,e.textContent)&&PK(XK,e.innerHTML)||_e&&e.namespaceURI===Be&&t===`style`&&bt(e.firstElementChild)||e.nodeType===QK.processingInstruction||_e&&e.nodeType===QK.comment&&PK(ZK,e.data))},Ct=function(e,t,n){if(!le[t]&&Ot(t)&&(ce.tagNameCheck instanceof RegExp&&PK(ce.tagNameCheck,t)||ce.tagNameCheck instanceof Function&&ce.tagNameCheck(t)))return!1;if(ke&&!Me[t]){let t=g(e),r=h(e);if(r&&t){let i=r.length;for(let a=i-1;a>=0;--a){let i=e===n?f(r[a],!0):r[a];t.insertBefore(i,m(e))}}}return ct(e),!0},wt=function(e,t,n,r){return e.length===0?t:t===n||t===r?RK(t):t},Tt=function(e,n){if(xt(L.beforeSanitizeElements,e,null),e!==n&&g(e)===null)return Ae&&ft(e),!0;if(vt(e))return ct(e),!0;let r=Qe(b?b(e):e.nodeName);if(ae=wt(L.uponSanitizeElement,ae,oe,be),xt(L.uponSanitizeElement,e,{tagName:r,allowedTags:ae}),e!==n&&g(e)===null)return Ae&&ft(e),!0;if(St(e,r))return ct(e),!0;if(le[r]||!(de.tagCheck instanceof Function&&de.tagCheck(r))&&!ae[r]){let t=Ct(e,r,n);return t===!1&&xt(L.afterSanitizeElements,e,null),t}if((y?y(e):e.nodeType)===QK.element&&!st(e)||(r===`noscript`||r===`noembed`||r===`noframes`)&&PK(aje,e.innerHTML))return ct(e),!0;if(ge&&e.nodeType===QK.text){let n=gt(e.textContent);e.textContent!==n&&(CK(t.removed,{element:e.cloneNode()}),e.textContent=n)}return xt(L.afterSanitizeElements,e,null),!1},Et=function(e,t,r){if(ue[t]||_e&&t===`patchsrc`||_e&&t===`for`&&e!==`label`&&e!==`output`||Ee&&(t===`id`||t===`name`)&&(r in n||r in et))return!1;let i=se[t]||de.attributeCheck instanceof Function&&de.attributeCheck(t,e);if(!(pe&&PK(V,t))&&!(fe&&PK(ee,t))){if(!i){if(!(Ot(e)&&(ce.tagNameCheck instanceof RegExp&&PK(ce.tagNameCheck,e)||ce.tagNameCheck instanceof Function&&ce.tagNameCheck(e))&&(ce.attributeNameCheck instanceof RegExp&&PK(ce.attributeNameCheck,t)||ce.attributeNameCheck instanceof Function&&ce.attributeNameCheck(t,e))||t===`is`&&ce.allowCustomizedBuiltInElements&&(ce.tagNameCheck instanceof RegExp&&PK(ce.tagNameCheck,r)||ce.tagNameCheck instanceof Function&&ce.tagNameCheck(r))))return!1}else if(!Ie[t]&&!PK(ie,OK(r,ne,``))&&!((t===`src`||t===`xlink:href`||t===`href`)&&e!==`script`&&kK(r,`data:`)===0&&Pe[e])&&!(me&&!PK(te,OK(r,ne,``)))&&r)return!1}return!0},Dt=LK({},[`annotation-xml`,`color-profile`,`font-face`,`font-face-format`,`font-face-name`,`font-face-src`,`font-face-uri`,`missing-glyph`]),Ot=function(e){return!Dt[TK(e)]&&PK(re,e)},kt=function(e,t,n,r){if(S&&typeof u==`object`&&typeof u.getAttributeType==`function`&&!n)switch(u.getAttributeType(e,t)){case`TrustedHTML`:return O(r);case`TrustedScriptURL`:return k(r)}return r},At=function(e,n,r,i){try{r?e.setAttributeNS(r,n,i):e.setAttribute(n,i),vt(e)?ct(e):SK(t.removed)}catch{ut(n,e)}},jt=function(e){xt(L.beforeSanitizeAttributes,e,null);let t=e.attributes;if(!t||vt(e))return;se=wt(L.uponSanitizeAttribute,se,H,xe);let n={attrName:``,attrValue:``,keepAttr:!0,allowedAttributes:se,forceKeepAttr:void 0},r=t.length,i=Qe(e.nodeName);for(;r--;){let a=t[r],o=a.name,s=a.namespaceURI,c=a.value,l=Qe(o),u=c,d=o===`value`?u:VAe(u);if(n.attrName=l,n.attrValue=d,n.keepAttr=!0,n.forceKeepAttr=void 0,xt(L.uponSanitizeAttribute,e,n),d=n.attrValue,De&&(l===`id`||l===`name`)&&kK(d,Oe)!==0&&(ut(o,e),d=Oe+d),_e&&PK(/((--!?|])>)|<\/(style|script|title|xmp|textarea|noscript|iframe|noembed|noframes)/i,d)){ut(o,e);continue}if(l===`attributename`&&DK(d,`href`)){ut(o,e);continue}if(!n.forceKeepAttr){if(!n.keepAttr){ut(o,e);continue}if(!he&&PK(oje,d)){ut(o,e);continue}if(ge&&(d=gt(d)),!Et(i,l,d)){ut(o,e);continue}d=kt(i,l,s,d),d!==u&&At(e,o,s,d)}}xt(L.afterSanitizeAttributes,e,null)},Mt=function(e){let t=null,n=ht(e);for(xt(L.beforeSanitizeShadowDOM,e,null);t=n.nextNode();)if(xt(L.uponSanitizeShadowNode,t,null),Tt(t,e),jt(t),yt(t.content)&&Mt(t.content),(y?y(t):t.nodeType)===QK.element){let e=_(t);yt(e)&&(Nt(e),Mt(e))}xt(L.afterSanitizeShadowDOM,e,null)},Nt=function(e){let t=[{node:e,shadow:null}];for(;t.length>0;){let e=t.pop();if(e.shadow){Mt(e.shadow);continue}let n=e.node,r=(y?y(n):n.nodeType)===QK.element,i=h(n);if(i)for(let e=i.length-1;e>=0;--e)t.push({node:i[e],shadow:null});if(r){let e=b?b(n):null;if(typeof e==`string`&&Qe(e)===`template`){let e=n.content;yt(e)&&t.push({node:e,shadow:null})}}if(r){let e=_(n);yt(e)&&t.push({node:null,shadow:e},{node:e,shadow:null})}}};return t.sanitize=function(e){let n=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{},i=null,a=null,o=null,s=null;if(He=!e,He&&(e=`<!-->`),typeof e!=`string`&&!bt(e)&&(e=KAe(e),typeof e!=`string`))throw FK(`dirty is not a string, aborting`);if(!t.isSupported)return e;ye?(ae=be,se=xe):tt(n),(L.uponSanitizeElement.length>0||L.uponSanitizeAttribute.length>0)&&(ae=RK(ae)),L.uponSanitizeAttribute.length>0&&(se=RK(se)),t.removed=[];let c=Ae&&typeof e!=`string`&&bt(e);if(c){pt(e);let t=b?b(e):e.nodeName;if(typeof t==`string`){let n=Qe(t);if(!ae[n]||le[n])throw lt(e),FK(`root node is forbidden and cannot be sanitized in-place`)}if(vt(e))throw lt(e),FK(`root node is clobbered and cannot be sanitized in-place`);try{Nt(e)}catch(t){throw lt(e),t}}else if(bt(e))i=mt(`<!---->`),a=i.ownerDocument.importNode(e,!0),a.nodeType===QK.element&&a.nodeName===`BODY`||a.nodeName===`HTML`?i=a:i.appendChild(a),Nt(a);else{if(!Ce&&!ge&&!ve&&e.indexOf(`<`)===-1)return S&&Te?O(e):e;if(i=mt(e),!i)return Ce?null:Te?C:``}i&&Se&&ct(i.firstChild);let l=c?e:i;try{let e=ht(l);for(;o=e.nextNode();)Tt(o,l),jt(o),yt(o.content)&&Mt(o.content)}catch(n){throw c&&(lt(e),xK(t.removed,e=>{e.element&&ft(e.element)})),n}if(c)return xK(t.removed,e=>{e.element&&ft(e.element)}),ge&&_t(e),e;if(Ce){if(ge&&_t(i),we)for(s=P.call(i.ownerDocument);i.firstChild;)s.appendChild(i.firstChild);else s=i;return(se.shadowroot||se.shadowrootmode)&&(s=I.call(r,s,!0)),s}let u=ve?i.outerHTML:i.innerHTML;return ve&&ae[`!doctype`]&&i.ownerDocument&&i.ownerDocument.doctype&&i.ownerDocument.doctype.name&&PK(rje,i.ownerDocument.doctype.name)&&(u=`<!DOCTYPE `+i.ownerDocument.doctype.name+`>
+`+u),ge&&(u=gt(u)),S&&Te?O(u):u},t.setConfig=function(){tt(arguments.length>0&&arguments[0]!==void 0?arguments[0]:{}),ye=!0,be=ae,xe=se},t.clearConfig=function(){$e=null,ye=!1,be=null,xe=null,S=w,C=``},t.isValidAttribute=function(e,t,n){return $e||tt({}),Et(Qe(e),Qe(t),n)},t.addHook=function(e,t){typeof t==`function`&&MK(L,e)&&CK(L[e],t)},t.removeHook=function(e,t){if(MK(L,e)){if(t!==void 0){let n=zAe(L[e],t);return n===-1?void 0:BAe(L[e],n,1)[0]}return SK(L[e])}},t.removeHooks=function(e){MK(L,e)&&(L[e]=[])},t.removeAllHooks=function(){L=$K()},t}var nq=tq(),rq=Object.defineProperty,lje=(e,t)=>{let n={};for(var r in e)rq(n,r,{get:e[r],enumerable:!0});return t||rq(n,Symbol.toStringTag,{value:`Module`}),n};function iq(e){this.content=e}iq.prototype={constructor:iq,find:function(e){for(var t=0;t<this.content.length;t+=2)if(this.content[t]===e)return t;return-1},get:function(e){var t=this.find(e);return t==-1?void 0:this.content[t+1]},update:function(e,t,n){var r=n&&n!=e?this.remove(n):this,i=r.find(e),a=r.content.slice();return i==-1?a.push(n||e,t):(a[i+1]=t,n&&(a[i]=n)),new iq(a)},remove:function(e){var t=this.find(e);if(t==-1)return this;var n=this.content.slice();return n.splice(t,2),new iq(n)},addToStart:function(e,t){return new iq([e,t].concat(this.remove(e).content))},addToEnd:function(e,t){var n=this.remove(e).content.slice();return n.push(e,t),new iq(n)},addBefore:function(e,t,n){var r=this.remove(t),i=r.content.slice(),a=r.find(e);return i.splice(a==-1?i.length:a,0,t,n),new iq(i)},forEach:function(e){for(var t=0;t<this.content.length;t+=2)e(this.content[t],this.content[t+1])},prepend:function(e){return e=iq.from(e),e.size?new iq(e.content.concat(this.subtract(e).content)):this},append:function(e){return e=iq.from(e),e.size?new iq(this.subtract(e).content.concat(e.content)):this},subtract:function(e){var t=this;e=iq.from(e);for(var n=0;n<e.content.length;n+=2)t=t.remove(e.content[n]);return t},toObject:function(){var e={};return this.forEach(function(t,n){e[t]=n}),e},get size(){return this.content.length>>1}},iq.from=function(e){if(e instanceof iq)return e;var t=[];if(e)for(var n in e)t.push(n,e[n]);return new iq(t)};function aq(e,t,n){for(let r=0;;r++){if(r==e.childCount||r==t.childCount)return e.childCount==t.childCount?null:n;let i=e.child(r),a=t.child(r);if(i==a){n+=i.nodeSize;continue}if(!i.sameMarkup(a))return n;if(i.isText&&i.text!=a.text){let e=i.text,t=a.text,r=0;for(;e[r]==t[r];r++)n++;return r&&r<e.length&&r<t.length&&cq(e.charCodeAt(r-1))&&sq(e.charCodeAt(r))&&n--,n}if(i.content.size||a.content.size){let e=aq(i.content,a.content,n+1);if(e!=null)return e}n+=i.nodeSize}}function oq(e,t,n,r){for(let i=e.childCount,a=t.childCount;;){if(i==0||a==0)return i==a?null:{a:n,b:r};let o=e.child(--i),s=t.child(--a),c=o.nodeSize;if(o==s){n-=c,r-=c;continue}if(!o.sameMarkup(s))return{a:n,b:r};if(o.isText&&o.text!=s.text){let e=o.text,t=s.text,i=e.length,a=t.length;for(;i>0&&a>0&&e[i-1]==t[a-1];)i--,a--,n--,r--;return i&&a&&i<e.length&&cq(e.charCodeAt(i-1))&&sq(e.charCodeAt(i))&&(n++,r++),{a:n,b:r}}if(o.content.size||s.content.size){let e=oq(o.content,s.content,n-1,r-1);if(e)return e}n-=c,r-=c}}function sq(e){return e>=56320&&e<57344}function cq(e){return e>=55296&&e<56320}var lq=class e{constructor(e,t){if(this.content=e,this.size=t||0,t==null)for(let t=0;t<e.length;t++)this.size+=e[t].nodeSize}nodesBetween(e,t,n,r=0,i){for(let a=0,o=0;o<t;a++){let s=this.content[a],c=o+s.nodeSize;if(c>e&&n(s,r+o,i||null,a)!==!1&&s.content.size){let i=o+1;s.nodesBetween(Math.max(0,e-i),Math.min(s.content.size,t-i),n,r+i)}o=c}}descendants(e){this.nodesBetween(0,this.size,e)}textBetween(e,t,n,r){let i=``,a=!0;return this.nodesBetween(e,t,(o,s)=>{let c=o.isText?o.text.slice(Math.max(e,s)-s,t-s):o.isLeaf?r?typeof r==`function`?r(o):r:o.type.spec.leafText?o.type.spec.leafText(o):``:``;o.isBlock&&(o.isLeaf&&c||o.isTextblock)&&n&&(a?a=!1:i+=n),i+=c},0),i}append(t){if(!t.size)return this;if(!this.size)return t;let n=this.lastChild,r=t.firstChild,i=this.content.slice(),a=0;for(n.isText&&n.sameMarkup(r)&&(i[i.length-1]=n.withText(n.text+r.text),a=1);a<t.content.length;a++)i.push(t.content[a]);return new e(i,this.size+t.size)}cut(t,n=this.size){if(t==0&&n==this.size)return this;let r=[],i=0;if(n>t)for(let e=0,a=0;a<n;e++){let o=this.content[e],s=a+o.nodeSize;s>t&&((a<t||s>n)&&(o=o.isText?o.cut(Math.max(0,t-a),Math.min(o.text.length,n-a)):o.cut(Math.max(0,t-a-1),Math.min(o.content.size,n-a-1))),r.push(o),i+=o.nodeSize),a=s}return new e(r,i)}cutByIndex(t,n){return t==n?e.empty:t==0&&n==this.content.length?this:new e(this.content.slice(t,n))}replaceChild(t,n){let r=this.content[t];if(r==n)return this;let i=this.content.slice(),a=this.size+n.nodeSize-r.nodeSize;return i[t]=n,new e(i,a)}addToStart(t){return new e([t].concat(this.content),this.size+t.nodeSize)}addToEnd(t){return new e(this.content.concat(t),this.size+t.nodeSize)}eq(e){if(this.content.length!=e.content.length)return!1;for(let t=0;t<this.content.length;t++)if(!this.content[t].eq(e.content[t]))return!1;return!0}get firstChild(){return this.content.length?this.content[0]:null}get lastChild(){return this.content.length?this.content[this.content.length-1]:null}get childCount(){return this.content.length}child(e){let t=this.content[e];if(!t)throw RangeError(`Index `+e+` out of range for `+this);return t}maybeChild(e){return this.content[e]||null}forEach(e){for(let t=0,n=0;t<this.content.length;t++){let r=this.content[t];e(r,n,t),n+=r.nodeSize}}findDiffStart(e,t=0){return aq(this,e,t)}findDiffEnd(e,t=this.size,n=e.size){return oq(this,e,t,n)}findIndex(e){if(e==0)return dq(0,e);if(e==this.size)return dq(this.content.length,e);if(e>this.size||e<0)throw RangeError(`Position ${e} outside of fragment (${this})`);for(let t=0,n=0;;t++){let r=this.child(t),i=n+r.nodeSize;if(i>=e)return i==e?dq(t+1,i):dq(t,n);n=i}}toString(){return`<`+this.toStringInner()+`>`}toStringInner(){return this.content.join(`, `)}toJSON(){return this.content.length?this.content.map(e=>e.toJSON()):null}static fromJSON(t,n){if(!n)return e.empty;if(!Array.isArray(n))throw RangeError(`Invalid input for Fragment.fromJSON`);return e.fromArray(n.map(t.nodeFromJSON))}static fromArray(t){if(!t.length)return e.empty;let n,r=0;for(let e=0;e<t.length;e++){let i=t[e];r+=i.nodeSize,e&&i.isText&&t[e-1].sameMarkup(i)?(n||=t.slice(0,e),n[n.length-1]=i.withText(n[n.length-1].text+i.text)):n&&n.push(i)}return new e(n||t,r)}static from(t){if(!t)return e.empty;if(t instanceof e)return t;if(Array.isArray(t))return this.fromArray(t);if(t.attrs)return new e([t],t.nodeSize);throw RangeError(`Can not convert `+t+` to a Fragment`+(t.nodesBetween?` (looks like multiple versions of prosemirror-model were loaded)`:``))}};lq.empty=new lq([],0);var uq={index:0,offset:0};function dq(e,t){return uq.index=e,uq.offset=t,uq}function fq(e,t){if(e===t)return!0;if(!(e&&typeof e==`object`)||!(t&&typeof t==`object`))return!1;let n=Array.isArray(e);if(Array.isArray(t)!=n)return!1;if(n){if(e.length!=t.length)return!1;for(let n=0;n<e.length;n++)if(!fq(e[n],t[n]))return!1}else{for(let n in e)if(!(n in t)||!fq(e[n],t[n]))return!1;for(let n in t)if(!(n in e))return!1}return!0}var pq=class e{constructor(e,t){this.type=e,this.attrs=t}addToSet(e){let t,n=!1;for(let r=0;r<e.length;r++){let i=e[r];if(this.eq(i))return e;if(this.type.excludes(i.type))t||=e.slice(0,r);else if(i.type.excludes(this.type))return e;else !n&&i.type.rank>this.type.rank&&(t||=e.slice(0,r),t.push(this),n=!0),t&&t.push(i)}return t||=e.slice(),n||t.push(this),t}removeFromSet(e){for(let t=0;t<e.length;t++)if(this.eq(e[t]))return e.slice(0,t).concat(e.slice(t+1));return e}isInSet(e){for(let t=0;t<e.length;t++)if(this.eq(e[t]))return!0;return!1}eq(e){return this==e||this.type==e.type&&fq(this.attrs,e.attrs)}toJSON(){let e={type:this.type.name};for(let t in this.attrs){e.attrs=this.attrs;break}return e}static fromJSON(e,t){if(!t)throw RangeError(`Invalid input for Mark.fromJSON`);let n=e.marks[t.type];if(!n)throw RangeError(`There is no mark type ${t.type} in this schema`);let r=n.create(t.attrs);return n.checkAttrs(r.attrs),r}static sameSet(e,t){if(e==t)return!0;if(e.length!=t.length)return!1;for(let n=0;n<e.length;n++)if(!e[n].eq(t[n]))return!1;return!0}static setFrom(t){if(!t||Array.isArray(t)&&t.length==0)return e.none;if(t instanceof e)return[t];let n=t.slice();return n.sort((e,t)=>e.type.rank-t.type.rank),n}};pq.none=[];var mq=class extends Error{},hq=class e{constructor(e,t,n){this.content=e,this.openStart=t,this.openEnd=n}get size(){return this.content.size-this.openStart-this.openEnd}insertAt(t,n){let r=_q(this.content,t+this.openStart,n,this.openStart+1,this.openEnd+1);return r&&new e(r,this.openStart,this.openEnd)}removeBetween(t,n){return new e(gq(this.content,t+this.openStart,n+this.openStart),this.openStart,this.openEnd)}eq(e){return this.content.eq(e.content)&&this.openStart==e.openStart&&this.openEnd==e.openEnd}toString(){return this.content+`(`+this.openStart+`,`+this.openEnd+`)`}toJSON(){if(!this.content.size)return null;let e={content:this.content.toJSON()};return this.openStart>0&&(e.openStart=this.openStart),this.openEnd>0&&(e.openEnd=this.openEnd),e}static fromJSON(t,n){if(!n)return e.empty;let r=n.openStart||0,i=n.openEnd||0;if(typeof r!=`number`||typeof i!=`number`)throw RangeError(`Invalid input for Slice.fromJSON`);return new e(lq.fromJSON(t,n.content),r,i)}static maxOpen(t,n=!0){let r=0,i=0;for(let e=t.firstChild;e&&!e.isLeaf&&(n||!e.type.spec.isolating);e=e.firstChild)r++;for(let e=t.lastChild;e&&!e.isLeaf&&(n||!e.type.spec.isolating);e=e.lastChild)i++;return new e(t,r,i)}};hq.empty=new hq(lq.empty,0,0);function gq(e,t,n){let{index:r,offset:i}=e.findIndex(t),a=e.maybeChild(r),{index:o,offset:s}=e.findIndex(n);if(i==t||a.isText){if(s!=n&&!e.child(o).isText)throw RangeError(`Removing non-flat range`);return e.cut(0,t).append(e.cut(n))}if(r!=o)throw RangeError(`Removing non-flat range`);return e.replaceChild(r,a.copy(gq(a.content,t-i-1,n-i-1)))}function _q(e,t,n,r,i,a){let{index:o,offset:s}=e.findIndex(t),c=e.maybeChild(o);if(s==t||c.isText)return a&&r<=0&&i<=0&&!a.canReplace(o,o,n)?null:e.cut(0,t).append(n).append(e.cut(t));let l=_q(c.content,t-s-1,n,o==0?r-1:0,o==e.childCount-1?i-1:0,c);return l&&e.replaceChild(o,c.copy(l))}function uje(e,t,n){if(n.openStart>e.depth)throw new mq(`Inserted content deeper than insertion position`);if(e.depth-n.openStart!=t.depth-n.openEnd)throw new mq(`Inconsistent open depths`);return vq(e,t,n,0)}function vq(e,t,n,r){let i=e.index(r),a=e.node(r);if(i==t.index(r)&&r<e.depth-n.openStart){let o=vq(e,t,n,r+1);return a.copy(a.content.replaceChild(i,o))}else if(!n.content.size)return Cq(a,Tq(e,t,r));else if(!n.openStart&&!n.openEnd&&e.depth==r&&t.depth==r){let r=e.parent,i=r.content;return Cq(r,i.cut(0,e.parentOffset).append(n.content).append(i.cut(t.parentOffset)))}else{let{start:i,end:o}=dje(n,e);return Cq(a,wq(e,i,o,t,r))}}function yq(e,t){if(!t.type.compatibleContent(e.type))throw new mq(`Cannot join `+t.type.name+` onto `+e.type.name)}function bq(e,t,n){let r=e.node(n);return yq(r,t.node(n)),r}function xq(e,t){let n=t.length-1;n>=0&&e.isText&&e.sameMarkup(t[n])?t[n]=e.withText(t[n].text+e.text):t.push(e)}function Sq(e,t,n,r){let i=(t||e).node(n),a=0,o=t?t.index(n):i.childCount;e&&(a=e.index(n),e.depth>n?a++:e.textOffset&&(xq(e.nodeAfter,r),a++));for(let e=a;e<o;e++)xq(i.child(e),r);t&&t.depth==n&&t.textOffset&&xq(t.nodeBefore,r)}function Cq(e,t){if(!e.type.validContent(t))throw new mq(`Invalid content for node `+e.type.name);return e.copy(t)}function wq(e,t,n,r,i){let a=e.depth>i&&bq(e,t,i+1),o=r.depth>i&&bq(n,r,i+1),s=[];return Sq(null,e,i,s),a&&o&&t.index(i)==n.index(i)?(yq(a,o),xq(Cq(a,wq(e,t,n,r,i+1)),s)):(a&&xq(Cq(a,Tq(e,t,i+1)),s),Sq(t,n,i,s),o&&xq(Cq(o,Tq(n,r,i+1)),s)),Sq(r,null,i,s),new lq(s)}function Tq(e,t,n){let r=[];return Sq(null,e,n,r),e.depth>n&&xq(Cq(bq(e,t,n+1),Tq(e,t,n+1)),r),Sq(t,null,n,r),new lq(r)}function dje(e,t){let n=t.depth-e.openStart,r=t.node(n).copy(e.content);for(let e=n-1;e>=0;e--)r=t.node(e).copy(lq.from(r));return{start:r.resolveNoCache(e.openStart+n),end:r.resolveNoCache(r.content.size-e.openEnd-n)}}var Eq=class e{constructor(e,t,n){this.pos=e,this.path=t,this.parentOffset=n,this.depth=t.length/3-1}resolveDepth(e){return e==null?this.depth:e<0?this.depth+e:e}get parent(){return this.node(this.depth)}get doc(){return this.node(0)}node(e){return this.path[this.resolveDepth(e)*3]}index(e){return this.path[this.resolveDepth(e)*3+1]}indexAfter(e){return e=this.resolveDepth(e),this.index(e)+(e==this.depth&&!this.textOffset?0:1)}start(e){return e=this.resolveDepth(e),e==0?0:this.path[e*3-1]+1}end(e){return e=this.resolveDepth(e),this.start(e)+this.node(e).content.size}before(e){if(e=this.resolveDepth(e),!e)throw RangeError(`There is no position before the top-level node`);return e==this.depth+1?this.pos:this.path[e*3-1]}after(e){if(e=this.resolveDepth(e),!e)throw RangeError(`There is no position after the top-level node`);return e==this.depth+1?this.pos:this.path[e*3-1]+this.path[e*3].nodeSize}get textOffset(){return this.pos-this.path[this.path.length-1]}get nodeAfter(){let e=this.parent,t=this.index(this.depth);if(t==e.childCount)return null;let n=this.pos-this.path[this.path.length-1],r=e.child(t);return n?e.child(t).cut(n):r}get nodeBefore(){let e=this.index(this.depth),t=this.pos-this.path[this.path.length-1];return t?this.parent.child(e).cut(0,t):e==0?null:this.parent.child(e-1)}posAtIndex(e,t){t=this.resolveDepth(t);let n=this.path[t*3],r=t==0?0:this.path[t*3-1]+1;for(let t=0;t<e;t++)r+=n.child(t).nodeSize;return r}marks(){let e=this.parent,t=this.index();if(e.content.size==0)return pq.none;if(this.textOffset)return e.child(t).marks;let n=e.maybeChild(t-1),r=e.maybeChild(t);if(!n){let e=n;n=r,r=e}let i=n.marks;for(var a=0;a<i.length;a++)i[a].type.spec.inclusive===!1&&(!r||!i[a].isInSet(r.marks))&&(i=i[a--].removeFromSet(i));return i}marksAcross(e){let t=this.parent.maybeChild(this.index());if(!t||!t.isInline)return null;let n=t.marks,r=e.parent.maybeChild(e.index());for(var i=0;i<n.length;i++)n[i].type.spec.inclusive===!1&&(!r||!n[i].isInSet(r.marks))&&(n=n[i--].removeFromSet(n));return n}sharedDepth(e){for(let t=this.depth;t>0;t--)if(this.start(t)<=e&&this.end(t)>=e)return t;return 0}blockRange(e=this,t){if(e.pos<this.pos)return e.blockRange(this);for(let n=this.depth-(this.parent.inlineContent||this.pos==e.pos?1:0);n>=0;n--)if(e.pos<=this.end(n)&&(!t||t(this.node(n))))return new Oq(this,e,n);return null}sameParent(e){return this.pos-this.parentOffset==e.pos-e.parentOffset}max(e){return e.pos>this.pos?e:this}min(e){return e.pos<this.pos?e:this}toString(){let e=``;for(let t=1;t<=this.depth;t++)e+=(e?`/`:``)+this.node(t).type.name+`_`+this.index(t-1);return e+`:`+this.parentOffset}static resolve(t,n){if(!(n>=0&&n<=t.content.size))throw RangeError(`Position `+n+` out of range`);let r=[],i=0,a=n;for(let e=t;;){let{index:t,offset:n}=e.content.findIndex(a),o=a-n;if(r.push(e,t,i+n),!o||(e=e.child(t),e.isText))break;a=o-1,i+=n+1}return new e(n,r,a)}static resolveCached(t,n){let r=Dq.get(t);if(r)for(let e=0;e<r.elts.length;e++){let t=r.elts[e];if(t.pos==n)return t}else Dq.set(t,r=new fje);let i=r.elts[r.i]=e.resolve(t,n);return r.i=(r.i+1)%pje,i}},fje=class{constructor(){this.elts=[],this.i=0}},pje=12,Dq=new WeakMap,Oq=class{constructor(e,t,n){this.$from=e,this.$to=t,this.depth=n}get start(){return this.$from.before(this.depth+1)}get end(){return this.$to.after(this.depth+1)}get parent(){return this.$from.node(this.depth)}get startIndex(){return this.$from.index(this.depth)}get endIndex(){return this.$to.indexAfter(this.depth)}},mje=Object.create(null),kq=class e{constructor(e,t,n,r=pq.none){this.type=e,this.attrs=t,this.marks=r,this.content=n||lq.empty}get children(){return this.content.content}get nodeSize(){return this.isLeaf?1:2+this.content.size}get childCount(){return this.content.childCount}child(e){return this.content.child(e)}maybeChild(e){return this.content.maybeChild(e)}forEach(e){this.content.forEach(e)}nodesBetween(e,t,n,r=0){this.content.nodesBetween(e,t,n,r,this)}descendants(e){this.nodesBetween(0,this.content.size,e)}get textContent(){return this.isLeaf&&this.type.spec.leafText?this.type.spec.leafText(this):this.textBetween(0,this.content.size,``)}textBetween(e,t,n,r){return this.content.textBetween(e,t,n,r)}get firstChild(){return this.content.firstChild}get lastChild(){return this.content.lastChild}eq(e){return this==e||this.sameMarkup(e)&&this.content.eq(e.content)}sameMarkup(e){return this.hasMarkup(e.type,e.attrs,e.marks)}hasMarkup(e,t,n){return this.type==e&&fq(this.attrs,t||e.defaultAttrs||mje)&&pq.sameSet(this.marks,n||pq.none)}copy(t=null){return t==this.content?this:new e(this.type,this.attrs,t,this.marks)}mark(t){return t==this.marks?this:new e(this.type,this.attrs,this.content,t)}cut(e,t=this.content.size){return e==0&&t==this.content.size?this:this.copy(this.content.cut(e,t))}slice(e,t=this.content.size,n=!1){if(e==t)return hq.empty;let r=this.resolve(e),i=this.resolve(t),a=n?0:r.sharedDepth(t),o=r.start(a);return new hq(r.node(a).content.cut(r.pos-o,i.pos-o),r.depth-a,i.depth-a)}replace(e,t,n){return uje(this.resolve(e),this.resolve(t),n)}nodeAt(e){for(let t=this;;){let{index:n,offset:r}=t.content.findIndex(e);if(t=t.maybeChild(n),!t)return null;if(r==e||t.isText)return t;e-=r+1}}childAfter(e){let{index:t,offset:n}=this.content.findIndex(e);return{node:this.content.maybeChild(t),index:t,offset:n}}childBefore(e){if(e==0)return{node:null,index:0,offset:0};let{index:t,offset:n}=this.content.findIndex(e);if(n<e)return{node:this.content.child(t),index:t,offset:n};let r=this.content.child(t-1);return{node:r,index:t-1,offset:n-r.nodeSize}}resolve(e){return Eq.resolveCached(this,e)}resolveNoCache(e){return Eq.resolve(this,e)}rangeHasMark(e,t,n){let r=!1;return t>e&&this.nodesBetween(e,t,e=>(n.isInSet(e.marks)&&(r=!0),!r)),r}get isBlock(){return this.type.isBlock}get isTextblock(){return this.type.isTextblock}get inlineContent(){return this.type.inlineContent}get isInline(){return this.type.isInline}get isText(){return this.type.isText}get isLeaf(){return this.type.isLeaf}get isAtom(){return this.type.isAtom}toString(){if(this.type.spec.toDebugString)return this.type.spec.toDebugString(this);let e=this.type.name;return this.content.size&&(e+=`(`+this.content.toStringInner()+`)`),Aq(this.marks,e)}contentMatchAt(e){let t=this.type.contentMatch.matchFragment(this.content,0,e);if(!t)throw Error(`Called contentMatchAt on a node with invalid content`);return t}canReplace(e,t,n=lq.empty,r=0,i=n.childCount){let a=this.contentMatchAt(e).matchFragment(n,r,i),o=a&&a.matchFragment(this.content,t);if(!o||!o.validEnd)return!1;for(let e=r;e<i;e++)if(!this.type.allowsMarks(n.child(e).marks))return!1;return!0}canReplaceWith(e,t,n,r){if(r&&!this.type.allowsMarks(r))return!1;let i=this.contentMatchAt(e).matchType(n),a=i&&i.matchFragment(this.content,t);return a?a.validEnd:!1}canAppend(e){return e.content.size?this.canReplace(this.childCount,this.childCount,e.content):this.type.compatibleContent(e.type)}check(){this.type.checkContent(this.content),this.type.checkAttrs(this.attrs);let e=pq.none;for(let t=0;t<this.marks.length;t++){let n=this.marks[t];n.type.checkAttrs(n.attrs),e=n.addToSet(e)}if(!pq.sameSet(e,this.marks))throw RangeError(`Invalid collection of marks for node ${this.type.name}: ${this.marks.map(e=>e.type.name)}`);this.content.forEach(e=>e.check())}toJSON(){let e={type:this.type.name};for(let t in this.attrs){e.attrs=this.attrs;break}return this.content.size&&(e.content=this.content.toJSON()),this.marks.length&&(e.marks=this.marks.map(e=>e.toJSON())),e}static fromJSON(e,t){if(!t)throw RangeError(`Invalid input for Node.fromJSON`);let n;if(t.marks){if(!Array.isArray(t.marks))throw RangeError(`Invalid mark data for Node.fromJSON`);n=t.marks.map(e.markFromJSON)}if(t.type==`text`){if(typeof t.text!=`string`)throw RangeError(`Invalid text node in JSON`);return e.text(t.text,n)}let r=lq.fromJSON(e,t.content),i=e.nodeType(t.type).create(t.attrs,r,n);return i.type.checkAttrs(i.attrs),i}};kq.prototype.text=void 0;var hje=class e extends kq{constructor(e,t,n,r){if(super(e,t,null,r),!n)throw RangeError(`Empty text nodes are not allowed`);this.text=n}toString(){return this.type.spec.toDebugString?this.type.spec.toDebugString(this):Aq(this.marks,JSON.stringify(this.text))}get textContent(){return this.text}textBetween(e,t){return this.text.slice(e,t)}get nodeSize(){return this.text.length}mark(t){return t==this.marks?this:new e(this.type,this.attrs,this.text,t)}withText(t){return t==this.text?this:new e(this.type,this.attrs,t,this.marks)}cut(e=0,t=this.text.length){return e==0&&t==this.text.length?this:this.withText(this.text.slice(e,t))}eq(e){return this.sameMarkup(e)&&this.text==e.text}toJSON(){let e=super.toJSON();return e.text=this.text,e}};function Aq(e,t){for(let n=e.length-1;n>=0;n--)t=e[n].type.name+`(`+t+`)`;return t}var jq=class e{constructor(e){this.validEnd=e,this.next=[],this.wrapCache=[]}static parse(t,n){let r=new gje(t,n);if(r.next==null)return e.empty;let i=Mq(r);r.next&&r.err(`Unexpected trailing text`);let a=Cje(Sje(i));return wje(a,r),a}matchType(e){for(let t=0;t<this.next.length;t++)if(this.next[t].type==e)return this.next[t].next;return null}matchFragment(e,t=0,n=e.childCount){let r=this;for(let i=t;r&&i<n;i++)r=r.matchType(e.child(i).type);return r}get inlineContent(){return this.next.length!=0&&this.next[0].type.isInline}get defaultType(){for(let e=0;e<this.next.length;e++){let{type:t}=this.next[e];if(!(t.isText||t.hasRequiredAttrs()))return t}return null}compatible(e){for(let t=0;t<this.next.length;t++)for(let n=0;n<e.next.length;n++)if(this.next[t].type==e.next[n].type)return!0;return!1}fillBefore(e,t=!1,n=0){let r=[this];function i(a,o){let s=a.matchFragment(e,n);if(s&&(!t||s.validEnd))return lq.from(o.map(e=>e.createAndFill()));for(let e=0;e<a.next.length;e++){let{type:t,next:n}=a.next[e];if(!(t.isText||t.hasRequiredAttrs())&&r.indexOf(n)==-1){r.push(n);let e=i(n,o.concat(t));if(e)return e}}return null}return i(this,[])}findWrapping(e){for(let t=0;t<this.wrapCache.length;t+=2)if(this.wrapCache[t]==e)return this.wrapCache[t+1];let t=this.computeWrapping(e);return this.wrapCache.push(e,t),t}computeWrapping(e){let t=Object.create(null),n=[{match:this,type:null,via:null}];for(;n.length;){let r=n.shift(),i=r.match;if(i.matchType(e)){let e=[];for(let t=r;t.type;t=t.via)e.push(t.type);return e.reverse()}for(let e=0;e<i.next.length;e++){let{type:a,next:o}=i.next[e];!a.isLeaf&&!a.hasRequiredAttrs()&&!(a.name in t)&&(!r.type||o.validEnd)&&(n.push({match:a.contentMatch,type:a,via:r}),t[a.name]=!0)}}return null}get edgeCount(){return this.next.length}edge(e){if(e>=this.next.length)throw RangeError(`There's no ${e}th edge in this content match`);return this.next[e]}toString(){let e=[];function t(n){e.push(n);for(let r=0;r<n.next.length;r++)e.indexOf(n.next[r].next)==-1&&t(n.next[r].next)}return t(this),e.map((t,n)=>{let r=n+(t.validEnd?`*`:` `)+` `;for(let n=0;n<t.next.length;n++)r+=(n?`, `:``)+t.next[n].type.name+`->`+e.indexOf(t.next[n].next);return r}).join(`
+`)}};jq.empty=new jq(!0);var gje=class{constructor(e,t){this.string=e,this.nodeTypes=t,this.inline=null,this.pos=0,this.tokens=e.split(/\s*(?=\b|\W|$)/),this.tokens[this.tokens.length-1]==``&&this.tokens.pop(),this.tokens[0]==``&&this.tokens.shift()}get next(){return this.tokens[this.pos]}eat(e){return this.next==e&&(this.pos++||!0)}err(e){throw SyntaxError(e+` (in content expression '`+this.string+`')`)}};function Mq(e){let t=[];do t.push(_je(e));while(e.eat(`|`));return t.length==1?t[0]:{type:`choice`,exprs:t}}function _je(e){let t=[];do t.push(vje(e));while(e.next&&e.next!=`)`&&e.next!=`|`);return t.length==1?t[0]:{type:`seq`,exprs:t}}function vje(e){let t=xje(e);for(;;)if(e.eat(`+`))t={type:`plus`,expr:t};else if(e.eat(`*`))t={type:`star`,expr:t};else if(e.eat(`?`))t={type:`opt`,expr:t};else if(e.eat(`{`))t=yje(e,t);else break;return t}function Nq(e){/\D/.test(e.next)&&e.err(`Expected number, got '`+e.next+`'`);let t=Number(e.next);return e.pos++,t}function yje(e,t){let n=Nq(e),r=n;return e.eat(`,`)&&(r=e.next==`}`?-1:Nq(e)),e.eat(`}`)||e.err(`Unclosed braced range`),{type:`range`,min:n,max:r,expr:t}}function bje(e,t){let n=e.nodeTypes,r=n[t];if(r)return[r];let i=[];for(let e in n){let r=n[e];r.isInGroup(t)&&i.push(r)}return i.length==0&&e.err(`No node type or group '`+t+`' found`),i}function xje(e){if(e.eat(`(`)){let t=Mq(e);return e.eat(`)`)||e.err(`Missing closing paren`),t}else if(/\W/.test(e.next))e.err(`Unexpected token '`+e.next+`'`);else{let t=bje(e,e.next).map(t=>(e.inline==null?e.inline=t.isInline:e.inline!=t.isInline&&e.err(`Mixing inline and block content`),{type:`name`,value:t}));return e.pos++,t.length==1?t[0]:{type:`choice`,exprs:t}}}function Sje(e){let t=[[]];return i(a(e,0),n()),t;function n(){return t.push([])-1}function r(e,n,r){let i={term:r,to:n};return t[e].push(i),i}function i(e,t){e.forEach(e=>e.to=t)}function a(e,t){if(e.type==`choice`)return e.exprs.reduce((e,n)=>e.concat(a(n,t)),[]);if(e.type==`seq`)for(let r=0;;r++){let o=a(e.exprs[r],t);if(r==e.exprs.length-1)return o;i(o,t=n())}else if(e.type==`star`){let o=n();return r(t,o),i(a(e.expr,o),o),[r(o)]}else if(e.type==`plus`){let o=n();return i(a(e.expr,t),o),i(a(e.expr,o),o),[r(o)]}else if(e.type==`opt`)return[r(t)].concat(a(e.expr,t));else if(e.type==`range`){let o=t;for(let t=0;t<e.min;t++){let t=n();i(a(e.expr,o),t),o=t}if(e.max==-1)i(a(e.expr,o),o);else for(let t=e.min;t<e.max;t++){let t=n();r(o,t),i(a(e.expr,o),t),o=t}return[r(o)]}else if(e.type==`name`)return[r(t,void 0,e.value)];else throw Error(`Unknown expr type`)}}function Pq(e,t){return t-e}function Fq(e,t){let n=[];return r(t),n.sort(Pq);function r(t){let i=e[t];if(i.length==1&&!i[0].term)return r(i[0].to);n.push(t);for(let e=0;e<i.length;e++){let{term:t,to:a}=i[e];!t&&n.indexOf(a)==-1&&r(a)}}}function Cje(e){let t=Object.create(null);return n(Fq(e,0));function n(r){let i=[];r.forEach(t=>{e[t].forEach(({term:t,to:n})=>{if(!t)return;let r;for(let e=0;e<i.length;e++)i[e][0]==t&&(r=i[e][1]);Fq(e,n).forEach(e=>{r||i.push([t,r=[]]),r.indexOf(e)==-1&&r.push(e)})})});let a=t[r.join(`,`)]=new jq(r.indexOf(e.length-1)>-1);for(let e=0;e<i.length;e++){let r=i[e][1].sort(Pq);a.next.push({type:i[e][0],next:t[r.join(`,`)]||n(r)})}return a}}function wje(e,t){for(let n=0,r=[e];n<r.length;n++){let e=r[n],i=!e.validEnd,a=[];for(let t=0;t<e.next.length;t++){let{type:n,next:o}=e.next[t];a.push(n.name),i&&!(n.isText||n.hasRequiredAttrs())&&(i=!1),r.indexOf(o)==-1&&r.push(o)}i&&t.err(`Only non-generatable nodes (`+a.join(`, `)+`) in a required position (see https://prosemirror.net/docs/guide/#generatable)`)}}function Iq(e){let t=Object.create(null);for(let n in e){let r=e[n];if(!r.hasDefault)return null;t[n]=r.default}return t}function Lq(e,t){let n=Object.create(null);for(let r in e){let i=t&&t[r];if(i===void 0){let t=e[r];if(t.hasDefault)i=t.default;else throw RangeError(`No value supplied for attribute `+r)}n[r]=i}return n}function Rq(e,t,n,r){for(let i in t)if(!(i in e))throw RangeError(`Unsupported attribute ${i} for ${n} of type ${r}`);for(let n in e)e[n].validate&&e[n].validate(t[n])}function zq(e,t){let n=Object.create(null);if(t)for(let r in t)n[r]=new Eje(e,r,t[r]);return n}var Bq=class e{constructor(e,t,n){this.name=e,this.schema=t,this.spec=n,this.markSet=null,this.groups=n.group?n.group.split(` `):[],this.attrs=zq(e,n.attrs),this.defaultAttrs=Iq(this.attrs),this.contentMatch=null,this.inlineContent=null,this.isBlock=!(n.inline||e==`text`),this.isText=e==`text`}get isInline(){return!this.isBlock}get isTextblock(){return this.isBlock&&this.inlineContent}get isLeaf(){return this.contentMatch==jq.empty}get isAtom(){return this.isLeaf||!!this.spec.atom}isInGroup(e){return this.groups.indexOf(e)>-1}get whitespace(){return this.spec.whitespace||(this.spec.code?`pre`:`normal`)}hasRequiredAttrs(){for(let e in this.attrs)if(this.attrs[e].isRequired)return!0;return!1}compatibleContent(e){return this==e||this.contentMatch.compatible(e.contentMatch)}computeAttrs(e){return!e&&this.defaultAttrs?this.defaultAttrs:Lq(this.attrs,e)}create(e=null,t,n){if(this.isText)throw Error(`NodeType.create can't construct text nodes`);return new kq(this,this.computeAttrs(e),lq.from(t),pq.setFrom(n))}createChecked(e=null,t,n){return t=lq.from(t),this.checkContent(t),new kq(this,this.computeAttrs(e),t,pq.setFrom(n))}createAndFill(e=null,t,n){if(e=this.computeAttrs(e),t=lq.from(t),t.size){let e=this.contentMatch.fillBefore(t);if(!e)return null;t=e.append(t)}let r=this.contentMatch.matchFragment(t),i=r&&r.fillBefore(lq.empty,!0);return i?new kq(this,e,t.append(i),pq.setFrom(n)):null}validContent(e){let t=this.contentMatch.matchFragment(e);if(!t||!t.validEnd)return!1;for(let t=0;t<e.childCount;t++)if(!this.allowsMarks(e.child(t).marks))return!1;return!0}checkContent(e){if(!this.validContent(e))throw RangeError(`Invalid content for node ${this.name}: ${e.toString().slice(0,50)}`)}checkAttrs(e){Rq(this.attrs,e,`node`,this.name)}allowsMarkType(e){return this.markSet==null||this.markSet.indexOf(e)>-1}allowsMarks(e){if(this.markSet==null)return!0;for(let t=0;t<e.length;t++)if(!this.allowsMarkType(e[t].type))return!1;return!0}allowedMarks(e){if(this.markSet==null)return e;let t;for(let n=0;n<e.length;n++)this.allowsMarkType(e[n].type)?t&&t.push(e[n]):t||=e.slice(0,n);return t?t.length?t:pq.none:e}static compile(t,n){let r=Object.create(null);t.forEach((t,i)=>r[t]=new e(t,n,i));let i=n.spec.topNode||`doc`;if(!r[i])throw RangeError(`Schema is missing its top node type ('`+i+`')`);if(!r.text)throw RangeError(`Every schema needs a 'text' type`);for(let e in r.text.attrs)throw RangeError(`The text node type should not have attributes`);return r}};function Tje(e,t,n){let r=n.split(`|`);return n=>{let i=n===null?`null`:typeof n;if(r.indexOf(i)<0)throw RangeError(`Expected value of type ${r} for attribute ${t} on type ${e}, got ${i}`)}}var Eje=class{constructor(e,t,n){this.hasDefault=Object.prototype.hasOwnProperty.call(n,`default`),this.default=n.default,this.validate=typeof n.validate==`string`?Tje(e,t,n.validate):n.validate}get isRequired(){return!this.hasDefault}},Vq=class e{constructor(e,t,n,r){this.name=e,this.rank=t,this.schema=n,this.spec=r,this.attrs=zq(e,r.attrs),this.excluded=null;let i=Iq(this.attrs);this.instance=i?new pq(this,i):null}create(e=null){return!e&&this.instance?this.instance:new pq(this,Lq(this.attrs,e))}static compile(t,n){let r=Object.create(null),i=0;return t.forEach((t,a)=>r[t]=new e(t,i++,n,a)),r}removeFromSet(e){for(var t=0;t<e.length;t++)e[t].type==this&&(e=e.slice(0,t).concat(e.slice(t+1)),t--);return e}isInSet(e){for(let t=0;t<e.length;t++)if(e[t].type==this)return e[t]}checkAttrs(e){Rq(this.attrs,e,`mark`,this.name)}excludes(e){return this.excluded.indexOf(e)>-1}},Hq=class{constructor(e){this.linebreakReplacement=null,this.cached=Object.create(null);let t=this.spec={};for(let n in e)t[n]=e[n];t.nodes=iq.from(e.nodes),t.marks=iq.from(e.marks||{}),this.nodes=Bq.compile(this.spec.nodes,this),this.marks=Vq.compile(this.spec.marks,this);let n=Object.create(null);for(let e in this.nodes){if(e in this.marks)throw RangeError(e+` can not be both a node and a mark`);let t=this.nodes[e],r=t.spec.content||``,i=t.spec.marks;if(t.contentMatch=n[r]||(n[r]=jq.parse(r,this.nodes)),t.inlineContent=t.contentMatch.inlineContent,t.spec.linebreakReplacement){if(this.linebreakReplacement)throw RangeError(`Multiple linebreak nodes defined`);if(!t.isInline||!t.isLeaf)throw RangeError(`Linebreak replacement nodes must be inline leaf nodes`);this.linebreakReplacement=t}t.markSet=i==`_`?null:i?Uq(this,i.split(` `)):i==``||!t.inlineContent?[]:null}for(let e in this.marks){let t=this.marks[e],n=t.spec.excludes;t.excluded=n==null?[t]:n==``?[]:Uq(this,n.split(` `))}this.nodeFromJSON=e=>kq.fromJSON(this,e),this.markFromJSON=e=>pq.fromJSON(this,e),this.topNodeType=this.nodes[this.spec.topNode||`doc`],this.cached.wrappings=Object.create(null)}node(e,t=null,n,r){if(typeof e==`string`)e=this.nodeType(e);else if(!(e instanceof Bq))throw RangeError(`Invalid node type: `+e);else if(e.schema!=this)throw RangeError(`Node type from different schema used (`+e.name+`)`);return e.createChecked(t,n,r)}text(e,t){let n=this.nodes.text;return new hje(n,n.defaultAttrs,e,pq.setFrom(t))}mark(e,t){return typeof e==`string`&&(e=this.marks[e]),e.create(t)}nodeType(e){let t=this.nodes[e];if(!t)throw RangeError(`Unknown node type: `+e);return t}};function Uq(e,t){let n=[];for(let r=0;r<t.length;r++){let i=t[r],a=e.marks[i],o=a;if(a)n.push(a);else for(let t in e.marks){let r=e.marks[t];(i==`_`||r.spec.group&&r.spec.group.split(` `).indexOf(i)>-1)&&n.push(o=r)}if(!o)throw SyntaxError(`Unknown mark type: '`+t[r]+`'`)}return n}function Dje(e){return e.tag!=null}function Oje(e){return e.style!=null}var Wq=class e{constructor(e,t){this.schema=e,this.rules=t,this.tags=[],this.styles=[];let n=this.matchedStyles=[];t.forEach(e=>{if(Dje(e))this.tags.push(e);else if(Oje(e)){let t=/[^=]*/.exec(e.style)[0];n.indexOf(t)<0&&n.push(t),this.styles.push(e)}}),this.normalizeLists=!this.tags.some(t=>{if(!/^(ul|ol)\b/.test(t.tag)||!t.node)return!1;let n=e.nodes[t.node];return n.contentMatch.matchType(n)})}parse(e,t={}){let n=new Qq(this,t,!1);return n.addAll(e,pq.none,t.from,t.to),n.finish()}parseSlice(e,t={}){let n=new Qq(this,t,!0);return n.addAll(e,pq.none,t.from,t.to),hq.maxOpen(n.finish())}matchTag(e,t,n){for(let r=n?this.tags.indexOf(n)+1:0;r<this.tags.length;r++){let n=this.tags[r];if(jje(e,n.tag)&&(n.namespace===void 0||e.namespaceURI==n.namespace)&&(!n.context||t.matchesContext(n.context))){if(n.getAttrs){let t=n.getAttrs(e);if(t===!1)continue;n.attrs=t||void 0}return n}}}matchStyle(e,t,n,r){for(let i=r?this.styles.indexOf(r)+1:0;i<this.styles.length;i++){let r=this.styles[i],a=r.style;if(!(a.indexOf(e)!=0||r.context&&!n.matchesContext(r.context)||a.length>e.length&&(a.charCodeAt(e.length)!=61||a.slice(e.length+1)!=t))){if(r.getAttrs){let e=r.getAttrs(t);if(e===!1)continue;r.attrs=e||void 0}return r}}}static schemaRules(e){let t=[];function n(e){let n=e.priority==null?50:e.priority,r=0;for(;r<t.length;r++){let e=t[r];if((e.priority==null?50:e.priority)<n)break}t.splice(r,0,e)}for(let t in e.marks){let r=e.marks[t].spec.parseDOM;r&&r.forEach(e=>{n(e=$q(e)),e.mark||e.ignore||e.clearMark||(e.mark=t)})}for(let t in e.nodes){let r=e.nodes[t].spec.parseDOM;r&&r.forEach(e=>{n(e=$q(e)),e.node||e.ignore||e.mark||(e.node=t)})}return t}static fromSchema(t){return t.cached.domParser||(t.cached.domParser=new e(t,e.schemaRules(t)))}},Gq={address:!0,article:!0,aside:!0,blockquote:!0,body:!0,canvas:!0,dd:!0,div:!0,dl:!0,fieldset:!0,figcaption:!0,figure:!0,footer:!0,form:!0,h1:!0,h2:!0,h3:!0,h4:!0,h5:!0,h6:!0,header:!0,hgroup:!0,hr:!0,li:!0,noscript:!0,ol:!0,output:!0,p:!0,pre:!0,section:!0,table:!0,tfoot:!0,ul:!0},kje={head:!0,noscript:!0,object:!0,script:!0,style:!0,title:!0},Kq={ol:!0,ul:!0},qq=1,Jq=2,Yq=4;function Xq(e,t,n){return t==null?e&&e.whitespace==`pre`?3:n&-5:(t?qq:0)|(t===`full`?Jq:0)}var Zq=class{constructor(e,t,n,r,i,a){this.type=e,this.attrs=t,this.marks=n,this.solid=r,this.options=a,this.content=[],this.activeMarks=pq.none,this.match=i||(a&Yq?null:e.contentMatch)}findWrapping(e){if(!this.match){if(!this.type)return[];let t=this.type.contentMatch.fillBefore(lq.from(e));if(t)this.match=this.type.contentMatch.matchFragment(t);else{let t=this.type.contentMatch,n;return(n=t.findWrapping(e.type))?(this.match=t,n):null}}return this.match.findWrapping(e.type)}finish(e){if(!(this.options&qq)){let e=this.content[this.content.length-1],t;if(e&&e.isText&&(t=/[ \t\r\n\u000c]+$/.exec(e.text))){let n=e;e.text.length==t[0].length?this.content.pop():this.content[this.content.length-1]=n.withText(n.text.slice(0,n.text.length-t[0].length))}}let t=lq.from(this.content);return!e&&this.match&&(t=t.append(this.match.fillBefore(lq.empty,!0))),this.type?this.type.create(this.attrs,t,this.marks):t}inlineContext(e){return this.type?this.type.inlineContent:this.content.length?this.content[0].isInline:e.parentNode&&!Gq.hasOwnProperty(e.parentNode.nodeName.toLowerCase())}},Qq=class{constructor(e,t,n){this.parser=e,this.options=t,this.isOpen=n,this.open=0,this.localPreserveWS=!1;let r=t.topNode,i,a=Xq(null,t.preserveWhitespace,0)|(n?Yq:0);i=r?new Zq(r.type,r.attrs,pq.none,!0,t.topMatch||r.type.contentMatch,a):n?new Zq(null,null,pq.none,!0,null,a):new Zq(e.schema.topNodeType,null,pq.none,!0,null,a),this.nodes=[i],this.find=t.findPositions,this.needsBlock=!1}get top(){return this.nodes[this.open]}addDOM(e,t){e.nodeType==3?this.addTextNode(e,t):e.nodeType==1&&this.addElement(e,t)}addTextNode(e,t){let n=e.nodeValue,r=this.top,i=r.options&Jq?`full`:this.localPreserveWS||(r.options&qq)>0,{schema:a}=this.parser;if(i===`full`||r.inlineContext(e)||/[^ \t\r\n\u000c]/.test(n)){if(!i){if(n=n.replace(/[ \t\r\n\u000c]+/g,` `),/^[ \t\r\n\u000c]/.test(n)&&this.open==this.nodes.length-1){let t=r.content[r.content.length-1],i=e.previousSibling;(!t||i&&i.nodeName==`BR`||t.isText&&/[ \t\r\n\u000c]$/.test(t.text))&&(n=n.slice(1))}}else if(i===`full`)n=n.replace(/\r\n?/g,`
+`);else if(a.linebreakReplacement&&/[\r\n]/.test(n)&&this.top.findWrapping(a.linebreakReplacement.create())){let e=n.split(/\r?\n|\r/);for(let n=0;n<e.length;n++)n&&this.insertNode(a.linebreakReplacement.create(),t,!0),e[n]&&this.insertNode(a.text(e[n]),t,!/\S/.test(e[n]));n=``}else n=n.replace(/\r?\n|\r/g,` `);n&&this.insertNode(a.text(n),t,!/\S/.test(n)),this.findInText(e)}else this.findInside(e)}addElement(e,t,n){let r=this.localPreserveWS,i=this.top;(e.tagName==`PRE`||/pre/.test(e.style&&e.style.whiteSpace))&&(this.localPreserveWS=!0);let a=e.nodeName.toLowerCase(),o;Kq.hasOwnProperty(a)&&this.parser.normalizeLists&&Aje(e);let s=this.options.ruleFromNode&&this.options.ruleFromNode(e)||(o=this.parser.matchTag(e,this,n));out:if(s?s.ignore:kje.hasOwnProperty(a))this.findInside(e),this.ignoreFallback(e,t);else if(!s||s.skip||s.closeParent){s&&s.closeParent?this.open=Math.max(0,this.open-1):s&&s.skip.nodeType&&(e=s.skip);let n,r=this.needsBlock;if(Gq.hasOwnProperty(a))i.content.length&&i.content[0].isInline&&this.open&&(this.open--,i=this.top),n=!0,i.type||(this.needsBlock=!0);else if(!e.firstChild){this.leafFallback(e,t);break out}let o=s&&s.skip?t:this.readStyles(e,t);o&&this.addAll(e,o),n&&this.sync(i),this.needsBlock=r}else{let n=this.readStyles(e,t);n&&this.addElementByRule(e,s,n,s.consuming===!1?o:void 0)}this.localPreserveWS=r}leafFallback(e,t){e.nodeName==`BR`&&this.top.type&&this.top.type.inlineContent&&this.addTextNode(e.ownerDocument.createTextNode(`
+`),t)}ignoreFallback(e,t){e.nodeName==`BR`&&(!this.top.type||!this.top.type.inlineContent)&&this.findPlace(this.parser.schema.text(`-`),t,!0)}readStyles(e,t){let n=e.style;if(n&&n.length)for(let e=0;e<this.parser.matchedStyles.length;e++){let r=this.parser.matchedStyles[e],i=n.getPropertyValue(r);if(i)for(let e;;){let n=this.parser.matchStyle(r,i,this,e);if(!n)break;if(n.ignore)return null;if(t=n.clearMark?t.filter(e=>!n.clearMark(e)):t.concat(this.parser.schema.marks[n.mark].create(n.attrs)),n.consuming===!1)e=n;else break}}return t}addElementByRule(e,t,n,r){let i,a;if(t.node)if(a=this.parser.schema.nodes[t.node],a.isLeaf)this.insertNode(a.create(t.attrs),n,e.nodeName==`BR`)||this.leafFallback(e,n);else{let e=this.enter(a,t.attrs||null,n,t.preserveWhitespace);e&&(i=!0,n=e)}else{let e=this.parser.schema.marks[t.mark];n=n.concat(e.create(t.attrs))}let o=this.top;if(a&&a.isLeaf)this.findInside(e);else if(r)this.addElement(e,n,r);else if(t.getContent)this.findInside(e),t.getContent(e,this.parser.schema).forEach(e=>this.insertNode(e,n,!1));else{let r=e;typeof t.contentElement==`string`?r=e.querySelector(t.contentElement):typeof t.contentElement==`function`?r=t.contentElement(e):t.contentElement&&(r=t.contentElement),this.findAround(e,r,!0),this.addAll(r,n),this.findAround(e,r,!1)}i&&this.sync(o)&&this.open--}addAll(e,t,n,r){let i=n||0;for(let a=n?e.childNodes[n]:e.firstChild,o=r==null?null:e.childNodes[r];a!=o;a=a.nextSibling,++i)this.findAtPoint(e,i),this.addDOM(a,t);this.findAtPoint(e,i)}findPlace(e,t,n){let r,i;for(let t=this.open,a=0;t>=0;t--){let o=this.nodes[t],s=o.findWrapping(e);if(s&&(!r||r.length>s.length+a)&&(r=s,i=o,!s.length))break;if(o.solid){if(n)break;a+=2}}if(!r)return null;this.sync(i);for(let e=0;e<r.length;e++)t=this.enterInner(r[e],null,t,!1);return t}insertNode(e,t,n){if(e.isInline&&this.needsBlock&&!this.top.type){let e=this.textblockFromContext();e&&(t=this.enterInner(e,null,t))}let r=this.findPlace(e,t,n);if(r){this.closeExtra();let t=this.top;t.match&&=t.match.matchType(e.type);let n=pq.none;for(let i of r.concat(e.marks))(t.type?t.type.allowsMarkType(i.type):eJ(i.type,e.type))&&(n=i.addToSet(n));return t.content.push(e.mark(n)),!0}return!1}enter(e,t,n,r){let i=this.findPlace(e.create(t),n,!1);return i&&=this.enterInner(e,t,n,!0,r),i}enterInner(e,t,n,r=!1,i){this.closeExtra();let a=this.top;a.match=a.match&&a.match.matchType(e);let o=Xq(e,i,a.options);a.options&Yq&&a.content.length==0&&(o|=Yq);let s=pq.none;return n=n.filter(t=>(a.type?a.type.allowsMarkType(t.type):eJ(t.type,e))?(s=t.addToSet(s),!1):!0),this.nodes.push(new Zq(e,t,s,r,null,o)),this.open++,n}closeExtra(e=!1){let t=this.nodes.length-1;if(t>this.open){for(;t>this.open;t--)this.nodes[t-1].content.push(this.nodes[t].finish(e));this.nodes.length=this.open+1}}finish(){return this.open=0,this.closeExtra(this.isOpen),this.nodes[0].finish(!!(this.isOpen||this.options.topOpen))}sync(e){for(let t=this.open;t>=0;t--)if(this.nodes[t]==e)return this.open=t,!0;else this.localPreserveWS&&(this.nodes[t].options|=qq);return!1}get currentPos(){this.closeExtra();let e=0;for(let t=this.open;t>=0;t--){let n=this.nodes[t].content;for(let t=n.length-1;t>=0;t--)e+=n[t].nodeSize;t&&e++}return e}findAtPoint(e,t){if(this.find)for(let n=0;n<this.find.length;n++)this.find[n].node==e&&this.find[n].offset==t&&(this.find[n].pos=this.currentPos)}findInside(e){if(this.find)for(let t=0;t<this.find.length;t++)this.find[t].pos==null&&e.nodeType==1&&e.contains(this.find[t].node)&&(this.find[t].pos=this.currentPos)}findAround(e,t,n){if(e!=t&&this.find)for(let r=0;r<this.find.length;r++)this.find[r].pos==null&&e.nodeType==1&&e.contains(this.find[r].node)&&t.compareDocumentPosition(this.find[r].node)&(n?2:4)&&(this.find[r].pos=this.currentPos)}findInText(e){if(this.find)for(let t=0;t<this.find.length;t++)this.find[t].node==e&&(this.find[t].pos=this.currentPos-(e.nodeValue.length-this.find[t].offset))}matchesContext(e){if(e.indexOf(`|`)>-1)return e.split(/\s*\|\s*/).some(this.matchesContext,this);let t=e.split(`/`),n=this.options.context,r=!this.isOpen&&(!n||n.parent.type==this.nodes[0].type),i=-(n?n.depth+1:0)+ +!r,a=(e,o)=>{for(;e>=0;e--){let s=t[e];if(s==``){if(e==t.length-1||e==0)continue;for(;o>=i;o--)if(a(e-1,o))return!0;return!1}else{let e=o>0||o==0&&r?this.nodes[o].type:n&&o>=i?n.node(o-i).type:null;if(!e||e.name!=s&&!e.isInGroup(s))return!1;o--}}return!0};return a(t.length-1,this.open)}textblockFromContext(){let e=this.options.context;if(e)for(let t=e.depth;t>=0;t--){let n=e.node(t).contentMatchAt(e.indexAfter(t)).defaultType;if(n&&n.isTextblock&&n.defaultAttrs)return n}for(let e in this.parser.schema.nodes){let t=this.parser.schema.nodes[e];if(t.isTextblock&&t.defaultAttrs)return t}}};function Aje(e){for(let t=e.firstChild,n=null;t;t=t.nextSibling){let e=t.nodeType==1?t.nodeName.toLowerCase():null;e&&Kq.hasOwnProperty(e)&&n?(n.appendChild(t),t=n):e==`li`?n=t:e&&(n=null)}}function jje(e,t){return(e.matches||e.msMatchesSelector||e.webkitMatchesSelector||e.mozMatchesSelector).call(e,t)}function $q(e){let t={};for(let n in e)t[n]=e[n];return t}function eJ(e,t){let n=t.schema.nodes;for(let r in n){let i=n[r];if(!i.allowsMarkType(e))continue;let a=[],o=e=>{a.push(e);for(let n=0;n<e.edgeCount;n++){let{type:r,next:i}=e.edge(n);if(r==t||a.indexOf(i)<0&&o(i))return!0}};if(o(i.contentMatch))return!0}}var tJ=class e{constructor(e,t){this.nodes=e,this.marks=t}serializeFragment(e,t={},n){n||=rJ(t).createDocumentFragment();let r=n,i=[];return e.forEach(e=>{if(i.length||e.marks.length){let n=0,a=0;for(;n<i.length&&a<e.marks.length;){let t=e.marks[a];if(!this.marks[t.type.name]){a++;continue}if(!t.eq(i[n][0])||t.type.spec.spanning===!1)break;n++,a++}for(;n<i.length;)r=i.pop()[1];for(;a<e.marks.length;){let n=e.marks[a++],o=this.serializeMark(n,e.isInline,t);o&&(i.push([n,r]),r.appendChild(o.dom),r=o.contentDOM||o.dom)}}r.appendChild(this.serializeNodeInner(e,t))}),n}serializeNodeInner(e,t){if(e.isText)return rJ(t).createTextNode(e.text);let{dom:n,contentDOM:r}=aJ(rJ(t),this.nodes[e.type.name](e),null,e.attrs);if(r){if(e.isLeaf)throw RangeError(`Content hole not allowed in a leaf node spec`);this.serializeFragment(e.content,t,r)}return n}serializeNode(e,t={}){let n=this.serializeNodeInner(e,t);for(let r=e.marks.length-1;r>=0;r--){let i=this.serializeMark(e.marks[r],e.isInline,t);i&&((i.contentDOM||i.dom).appendChild(n),n=i.dom)}return n}serializeMark(e,t,n={}){let r=this.marks[e.type.name];return r&&aJ(rJ(n),r(e,t),null,e.attrs)}static renderSpec(e,t,n=null,r){return typeof t==`string`?{dom:e.createTextNode(t)}:aJ(e,t,n,r)}static fromSchema(t){return t.cached.domSerializer||(t.cached.domSerializer=new e(this.nodesFromSchema(t),this.marksFromSchema(t)))}static nodesFromSchema(e){let t=nJ(e.nodes);return t.text||=e=>e.text,t}static marksFromSchema(e){return nJ(e.marks)}};function nJ(e){let t={};for(let n in e){let r=e[n].spec.toDOM;r&&(t[n]=r)}return t}function rJ(e){return e.document||window.document}var iJ=new WeakMap;function Mje(e){let t=iJ.get(e);return t===void 0&&iJ.set(e,t=Nje(e)),t}function Nje(e){let t=null;function n(e){if(e&&typeof e==`object`)if(Array.isArray(e))if(typeof e[0]==`string`)t||=[],t.push(e);else for(let t=0;t<e.length;t++)n(e[t]);else for(let t in e)n(e[t])}return n(e),t}function aJ(e,t,n,r){if(t.nodeType==1)return{dom:t};if(t.dom&&t.dom.nodeType==1)return t;let i=t[0],a;if(typeof i!=`string`)throw RangeError(`Invalid array passed to renderSpec`);if(r&&(a=Mje(r))&&a.indexOf(t)>-1)throw RangeError(`Using an array from an attribute object as a DOM spec. This may be an attempted cross site scripting attack.`);let o=i.indexOf(` `);o>0&&(n=i.slice(0,o),i=i.slice(o+1));let s,c=n?e.createElementNS(n,i):e.createElement(i),l=t[1],u=1;if(l&&typeof l==`object`&&l.nodeType==null&&!Array.isArray(l)){u=2;for(let e in l)if(l[e]!=null){let t=e.indexOf(` `);t>0?c.setAttributeNS(e.slice(0,t),e.slice(t+1),l[e]):e==`style`&&c.style?c.style.cssText=l[e]:c.setAttribute(e,l[e])}}for(let i=u;i<t.length;i++){let a=t[i];if(a===0){if(i<t.length-1||i>u)throw RangeError(`Content hole must be the only child of its parent node`);return{dom:c,contentDOM:c}}else if(typeof a==`string`)c.appendChild(e.createTextNode(a));else{let{dom:t,contentDOM:i}=aJ(e,a,n,r);if(c.appendChild(t),i){if(s)throw RangeError(`Multiple content holes`);s=i}}}return{dom:c,contentDOM:s}}var oJ=65535,sJ=2**16;function Pje(e,t){return e+t*sJ}function cJ(e){return e&oJ}function Fje(e){return(e-(e&oJ))/sJ}var Ije=1,Lje=2,lJ=4,uJ=8,dJ=class{constructor(e,t,n){this.pos=e,this.delInfo=t,this.recover=n}get deleted(){return(this.delInfo&uJ)>0}get deletedBefore(){return(this.delInfo&5)>0}get deletedAfter(){return(this.delInfo&6)>0}get deletedAcross(){return(this.delInfo&lJ)>0}},fJ=class e{constructor(t,n=!1){if(this.ranges=t,this.inverted=n,!t.length&&e.empty)return e.empty}recover(e){let t=0,n=cJ(e);if(!this.inverted)for(let e=0;e<n;e++)t+=this.ranges[e*3+2]-this.ranges[e*3+1];return this.ranges[n*3]+t+Fje(e)}mapResult(e,t=1){return this._map(e,t,!1)}map(e,t=1){return this._map(e,t,!0)}_map(e,t,n){let r=0,i=this.inverted?2:1,a=this.inverted?1:2;for(let o=0;o<this.ranges.length;o+=3){let s=this.ranges[o]-(this.inverted?r:0);if(s>e)break;let c=this.ranges[o+i],l=this.ranges[o+a],u=s+c;if(e<=u){let i=c?e==s?-1:e==u?1:t:t,a=s+r+(i<0?0:l);if(n)return a;let d=e==(t<0?s:u)?null:Pje(o/3,e-s),f=e==s?Lje:e==u?Ije:lJ;return(t<0?e!=s:e!=u)&&(f|=uJ),new dJ(a,f,d)}r+=l-c}return n?e+r:new dJ(e+r,0,null)}touches(e,t){let n=0,r=cJ(t),i=this.inverted?2:1,a=this.inverted?1:2;for(let t=0;t<this.ranges.length;t+=3){let o=this.ranges[t]-(this.inverted?n:0);if(o>e)break;let s=this.ranges[t+i];if(e<=o+s&&t==r*3)return!0;n+=this.ranges[t+a]-s}return!1}forEach(e){let t=this.inverted?2:1,n=this.inverted?1:2;for(let r=0,i=0;r<this.ranges.length;r+=3){let a=this.ranges[r],o=a-(this.inverted?i:0),s=a+(this.inverted?0:i),c=this.ranges[r+t],l=this.ranges[r+n];e(o,o+c,s,s+l),i+=l-c}}invert(){return new e(this.ranges,!this.inverted)}toString(){return(this.inverted?`-`:``)+JSON.stringify(this.ranges)}static offset(t){return t==0?e.empty:new e(t<0?[0,-t,0]:[0,0,t])}};fJ.empty=new fJ([]);var pJ=class e{constructor(e,t,n=0,r=e?e.length:0){this.mirror=t,this.from=n,this.to=r,this._maps=e||[],this.ownData=!(e||t)}get maps(){return this._maps}slice(t=0,n=this.maps.length){return new e(this._maps,this.mirror,t,n)}appendMap(e,t){this.ownData||=(this._maps=this._maps.slice(),this.mirror=this.mirror&&this.mirror.slice(),!0),this.to=this._maps.push(e),t!=null&&this.setMirror(this._maps.length-1,t)}appendMapping(e){for(let t=0,n=this._maps.length;t<e._maps.length;t++){let r=e.getMirror(t);this.appendMap(e._maps[t],r!=null&&r<t?n+r:void 0)}}getMirror(e){if(this.mirror){for(let t=0;t<this.mirror.length;t++)if(this.mirror[t]==e)return this.mirror[t+(t%2?-1:1)]}}setMirror(e,t){this.mirror||=[],this.mirror.push(e,t)}appendMappingInverted(e){for(let t=e.maps.length-1,n=this._maps.length+e._maps.length;t>=0;t--){let r=e.getMirror(t);this.appendMap(e._maps[t].invert(),r!=null&&r>t?n-r-1:void 0)}}invert(){let t=new e;return t.appendMappingInverted(this),t}map(e,t=1){if(this.mirror)return this._map(e,t,!0);for(let n=this.from;n<this.to;n++)e=this._maps[n].map(e,t);return e}mapResult(e,t=1){return this._map(e,t,!1)}_map(e,t,n){let r=0;for(let n=this.from;n<this.to;n++){let i=this._maps[n].mapResult(e,t);if(i.recover!=null){let t=this.getMirror(n);if(t!=null&&t>n&&t<this.to){n=t,e=this._maps[t].recover(i.recover);continue}}r|=i.delInfo,e=i.pos}return n?e:new dJ(e,r,null)}},mJ=Object.create(null),hJ=class{getMap(){return fJ.empty}merge(e){return null}static fromJSON(e,t){if(!t||!t.stepType)throw RangeError(`Invalid input for Step.fromJSON`);let n=mJ[t.stepType];if(!n)throw RangeError(`No step type ${t.stepType} defined`);return n.fromJSON(e,t)}static jsonID(e,t){if(e in mJ)throw RangeError(`Duplicate use of step JSON ID `+e);return mJ[e]=t,t.prototype.jsonID=e,t}},gJ=class e{constructor(e,t){this.doc=e,this.failed=t}static ok(t){return new e(t,null)}static fail(t){return new e(null,t)}static fromReplace(t,n,r,i){try{return e.ok(t.replace(n,r,i))}catch(t){if(t instanceof mq)return e.fail(t.message);throw t}}};function _J(e,t,n){let r=[];for(let i=0;i<e.childCount;i++){let a=e.child(i);a.content.size&&(a=a.copy(_J(a.content,t,a))),a.isInline&&(a=t(a,n,i)),r.push(a)}return lq.fromArray(r)}var vJ=class e extends hJ{constructor(e,t,n){super(),this.from=e,this.to=t,this.mark=n}apply(e){let t=e.slice(this.from,this.to),n=e.resolve(this.from),r=n.node(n.sharedDepth(this.to)),i=new hq(_J(t.content,(e,t)=>!e.isAtom||!t.type.allowsMarkType(this.mark.type)?e:e.mark(this.mark.addToSet(e.marks)),r),t.openStart,t.openEnd);return gJ.fromReplace(e,this.from,this.to,i)}invert(){return new yJ(this.from,this.to,this.mark)}map(t){let n=t.mapResult(this.from,1),r=t.mapResult(this.to,-1);return n.deleted&&r.deleted||n.pos>=r.pos?null:new e(n.pos,r.pos,this.mark)}merge(t){return t instanceof e&&t.mark.eq(this.mark)&&this.from<=t.to&&this.to>=t.from?new e(Math.min(this.from,t.from),Math.max(this.to,t.to),this.mark):null}toJSON(){return{stepType:`addMark`,mark:this.mark.toJSON(),from:this.from,to:this.to}}static fromJSON(t,n){if(typeof n.from!=`number`||typeof n.to!=`number`)throw RangeError(`Invalid input for AddMarkStep.fromJSON`);return new e(n.from,n.to,t.markFromJSON(n.mark))}};hJ.jsonID(`addMark`,vJ);var yJ=class e extends hJ{constructor(e,t,n){super(),this.from=e,this.to=t,this.mark=n}apply(e){let t=e.slice(this.from,this.to),n=new hq(_J(t.content,e=>e.mark(this.mark.removeFromSet(e.marks)),e),t.openStart,t.openEnd);return gJ.fromReplace(e,this.from,this.to,n)}invert(){return new vJ(this.from,this.to,this.mark)}map(t){let n=t.mapResult(this.from,1),r=t.mapResult(this.to,-1);return n.deleted&&r.deleted||n.pos>=r.pos?null:new e(n.pos,r.pos,this.mark)}merge(t){return t instanceof e&&t.mark.eq(this.mark)&&this.from<=t.to&&this.to>=t.from?new e(Math.min(this.from,t.from),Math.max(this.to,t.to),this.mark):null}toJSON(){return{stepType:`removeMark`,mark:this.mark.toJSON(),from:this.from,to:this.to}}static fromJSON(t,n){if(typeof n.from!=`number`||typeof n.to!=`number`)throw RangeError(`Invalid input for RemoveMarkStep.fromJSON`);return new e(n.from,n.to,t.markFromJSON(n.mark))}};hJ.jsonID(`removeMark`,yJ);var bJ=class e extends hJ{constructor(e,t){super(),this.pos=e,this.mark=t}apply(e){let t=e.nodeAt(this.pos);if(!t)return gJ.fail(`No node at mark step's position`);let n=t.type.create(t.attrs,null,this.mark.addToSet(t.marks));return gJ.fromReplace(e,this.pos,this.pos+1,new hq(lq.from(n),0,+!t.isLeaf))}invert(t){let n=t.nodeAt(this.pos);if(n){let t=this.mark.addToSet(n.marks);if(t.length==n.marks.length){for(let r=0;r<n.marks.length;r++)if(!n.marks[r].isInSet(t))return new e(this.pos,n.marks[r]);return new e(this.pos,this.mark)}}return new xJ(this.pos,this.mark)}map(t){let n=t.mapResult(this.pos,1);return n.deletedAfter?null:new e(n.pos,this.mark)}toJSON(){return{stepType:`addNodeMark`,pos:this.pos,mark:this.mark.toJSON()}}static fromJSON(t,n){if(typeof n.pos!=`number`)throw RangeError(`Invalid input for AddNodeMarkStep.fromJSON`);return new e(n.pos,t.markFromJSON(n.mark))}};hJ.jsonID(`addNodeMark`,bJ);var xJ=class e extends hJ{constructor(e,t){super(),this.pos=e,this.mark=t}apply(e){let t=e.nodeAt(this.pos);if(!t)return gJ.fail(`No node at mark step's position`);let n=t.type.create(t.attrs,null,this.mark.removeFromSet(t.marks));return gJ.fromReplace(e,this.pos,this.pos+1,new hq(lq.from(n),0,+!t.isLeaf))}invert(e){let t=e.nodeAt(this.pos);return!t||!this.mark.isInSet(t.marks)?this:new bJ(this.pos,this.mark)}map(t){let n=t.mapResult(this.pos,1);return n.deletedAfter?null:new e(n.pos,this.mark)}toJSON(){return{stepType:`removeNodeMark`,pos:this.pos,mark:this.mark.toJSON()}}static fromJSON(t,n){if(typeof n.pos!=`number`)throw RangeError(`Invalid input for RemoveNodeMarkStep.fromJSON`);return new e(n.pos,t.markFromJSON(n.mark))}};hJ.jsonID(`removeNodeMark`,xJ);var SJ=class e extends hJ{constructor(e,t,n,r=!1){super(),this.from=e,this.to=t,this.slice=n,this.structure=r}apply(e){return this.structure&&wJ(e,this.from,this.to)?gJ.fail(`Structure replace would overwrite content`):gJ.fromReplace(e,this.from,this.to,this.slice)}getMap(){return new fJ([this.from,this.to-this.from,this.slice.size])}invert(t){return new e(this.from,this.from+this.slice.size,t.slice(this.from,this.to))}map(t){let n=t.mapResult(this.to,-1),r=this.from==this.to&&e.MAP_BIAS<0?n:t.mapResult(this.from,1);return r.deletedAcross&&n.deletedAcross?null:new e(r.pos,Math.max(r.pos,n.pos),this.slice,this.structure)}merge(t){if(!(t instanceof e)||t.structure||this.structure)return null;if(this.from+this.slice.size==t.from&&!this.slice.openEnd&&!t.slice.openStart){let n=this.slice.size+t.slice.size==0?hq.empty:new hq(this.slice.content.append(t.slice.content),this.slice.openStart,t.slice.openEnd);return new e(this.from,this.to+(t.to-t.from),n,this.structure)}else if(t.to==this.from&&!this.slice.openStart&&!t.slice.openEnd){let n=this.slice.size+t.slice.size==0?hq.empty:new hq(t.slice.content.append(this.slice.content),t.slice.openStart,this.slice.openEnd);return new e(t.from,this.to,n,this.structure)}else return null}toJSON(){let e={stepType:`replace`,from:this.from,to:this.to};return this.slice.size&&(e.slice=this.slice.toJSON()),this.structure&&(e.structure=!0),e}static fromJSON(t,n){if(typeof n.from!=`number`||typeof n.to!=`number`)throw RangeError(`Invalid input for ReplaceStep.fromJSON`);return new e(n.from,n.to,hq.fromJSON(t,n.slice),!!n.structure)}};SJ.MAP_BIAS=1,hJ.jsonID(`replace`,SJ);var CJ=class e extends hJ{constructor(e,t,n,r,i,a,o=!1){super(),this.from=e,this.to=t,this.gapFrom=n,this.gapTo=r,this.slice=i,this.insert=a,this.structure=o}apply(e){if(this.structure&&(wJ(e,this.from,this.gapFrom)||wJ(e,this.gapTo,this.to)))return gJ.fail(`Structure gap-replace would overwrite content`);let t=e.slice(this.gapFrom,this.gapTo);if(t.openStart||t.openEnd)return gJ.fail(`Gap is not a flat range`);let n=this.slice.insertAt(this.insert,t.content);return n?gJ.fromReplace(e,this.from,this.to,n):gJ.fail(`Content does not fit in gap`)}getMap(){return new fJ([this.from,this.gapFrom-this.from,this.insert,this.gapTo,this.to-this.gapTo,this.slice.size-this.insert])}invert(t){let n=this.gapTo-this.gapFrom;return new e(this.from,this.from+this.slice.size+n,this.from+this.insert,this.from+this.insert+n,t.slice(this.from,this.to).removeBetween(this.gapFrom-this.from,this.gapTo-this.from),this.gapFrom-this.from,this.structure)}map(t){let n=t.mapResult(this.from,1),r=t.mapResult(this.to,-1),i=this.from==this.gapFrom?n.pos:t.map(this.gapFrom,-1),a=this.to==this.gapTo?r.pos:t.map(this.gapTo,1);return n.deletedAcross&&r.deletedAcross||i<n.pos||a>r.pos?null:new e(n.pos,r.pos,i,a,this.slice,this.insert,this.structure)}toJSON(){let e={stepType:`replaceAround`,from:this.from,to:this.to,gapFrom:this.gapFrom,gapTo:this.gapTo,insert:this.insert};return this.slice.size&&(e.slice=this.slice.toJSON()),this.structure&&(e.structure=!0),e}static fromJSON(t,n){if(typeof n.from!=`number`||typeof n.to!=`number`||typeof n.gapFrom!=`number`||typeof n.gapTo!=`number`||typeof n.insert!=`number`)throw RangeError(`Invalid input for ReplaceAroundStep.fromJSON`);return new e(n.from,n.to,n.gapFrom,n.gapTo,hq.fromJSON(t,n.slice),n.insert,!!n.structure)}};hJ.jsonID(`replaceAround`,CJ);function wJ(e,t,n){let r=e.resolve(t),i=n-t,a=r.depth;for(;i>0&&a>0&&r.indexAfter(a)==r.node(a).childCount;)a--,i--;if(i>0){let e=r.node(a).maybeChild(r.indexAfter(a));for(;i>0;){if(!e||e.isLeaf)return!0;e=e.firstChild,i--}}return!1}function Rje(e,t,n,r){let i=[],a=[],o,s;e.doc.nodesBetween(t,n,(e,c,l)=>{if(!e.isInline)return;let u=e.marks;if(!r.isInSet(u)&&l.type.allowsMarkType(r.type)){let l=Math.max(c,t),d=Math.min(c+e.nodeSize,n),f=r.addToSet(u);for(let e=0;e<u.length;e++)u[e].isInSet(f)||(o&&o.to==l&&o.mark.eq(u[e])?o.to=d:i.push(o=new yJ(l,d,u[e])));s&&s.to==l?s.to=d:a.push(s=new vJ(l,d,r))}}),i.forEach(t=>e.step(t)),a.forEach(t=>e.step(t))}function zje(e,t,n,r){let i=[],a=0;e.doc.nodesBetween(t,n,(e,o)=>{if(!e.isInline)return;a++;let s=null;if(r instanceof Vq){let t=e.marks,n;for(;n=r.isInSet(t);)(s||=[]).push(n),t=n.removeFromSet(t)}else r?r.isInSet(e.marks)&&(s=[r]):s=e.marks;if(s&&s.length){let r=Math.min(o+e.nodeSize,n);for(let e=0;e<s.length;e++){let n=s[e],c;for(let e=0;e<i.length;e++){let t=i[e];t.step==a-1&&n.eq(i[e].style)&&(c=t)}c?(c.to=r,c.step=a):i.push({style:n,from:Math.max(o,t),to:r,step:a})}}}),i.forEach(t=>e.step(new yJ(t.from,t.to,t.style)))}function TJ(e,t,n,r=n.contentMatch,i=!0){let a=e.doc.nodeAt(t),o=[],s=t+1;for(let t=0;t<a.childCount;t++){let c=a.child(t),l=s+c.nodeSize,u=r.matchType(c.type);if(!u)o.push(new SJ(s,l,hq.empty));else{r=u;for(let t=0;t<c.marks.length;t++)n.allowsMarkType(c.marks[t].type)||e.step(new yJ(s,l,c.marks[t]));if(i&&c.isText&&n.whitespace!=`pre`){let e,t=/\r?\n|\r/g,r;for(;e=t.exec(c.text);)r||=new hq(lq.from(n.schema.text(` `,n.allowedMarks(c.marks))),0,0),o.push(new SJ(s+e.index,s+e.index+e[0].length,r))}}s=l}if(!r.validEnd){let t=r.fillBefore(lq.empty,!0);e.replace(s,s,new hq(t,0,0))}for(let t=o.length-1;t>=0;t--)e.step(o[t])}function Bje(e,t,n){return(t==0||e.canReplace(t,e.childCount))&&(n==e.childCount||e.canReplace(0,n))}function EJ(e){let t=e.parent.content.cutByIndex(e.startIndex,e.endIndex);for(let n=e.depth,r=0,i=0;;--n){let a=e.$from.node(n),o=e.$from.index(n)+r,s=e.$to.indexAfter(n)-i;if(n<e.depth&&a.canReplace(o,s,t))return n;if(n==0||a.type.spec.isolating||!Bje(a,o,s))break;o&&(r=1),s<a.childCount&&(i=1)}return null}function Vje(e,t,n){let{$from:r,$to:i,depth:a}=t,o=r.before(a+1),s=i.after(a+1),c=o,l=s,u=lq.empty,d=0;for(let e=a,t=!1;e>n;e--)t||r.index(e)>0?(t=!0,u=lq.from(r.node(e).copy(u)),d++):c--;let f=lq.empty,p=0;for(let e=a,t=!1;e>n;e--)t||i.after(e+1)<i.end(e)?(t=!0,f=lq.from(i.node(e).copy(f)),p++):l++;e.step(new CJ(c,l,o,s,new hq(u.append(f),d,p),u.size-d,!0))}function DJ(e,t,n=null,r=e){let i=Hje(e,t),a=i&&Uje(r,t);return a?i.map(OJ).concat({type:t,attrs:n}).concat(a.map(OJ)):null}function OJ(e){return{type:e,attrs:null}}function Hje(e,t){let{parent:n,startIndex:r,endIndex:i}=e,a=n.contentMatchAt(r).findWrapping(t);if(!a)return null;let o=a.length?a[0]:t;return n.canReplaceWith(r,i,o)?a:null}function Uje(e,t){let{parent:n,startIndex:r,endIndex:i}=e,a=n.child(r),o=t.contentMatch.findWrapping(a.type);if(!o)return null;let s=(o.length?o[o.length-1]:t).contentMatch;for(let e=r;s&&e<i;e++)s=s.matchType(n.child(e).type);return!s||!s.validEnd?null:o}function Wje(e,t,n){let r=lq.empty;for(let e=n.length-1;e>=0;e--){if(r.size){let t=n[e].type.contentMatch.matchFragment(r);if(!t||!t.validEnd)throw RangeError(`Wrapper type given to Transform.wrap does not form valid content of its parent wrapper`)}r=lq.from(n[e].type.create(n[e].attrs,r))}let i=t.start,a=t.end;e.step(new CJ(i,a,i,a,new hq(r,0,0),n.length,!0))}function Gje(e,t,n,r,i){if(!r.isTextblock)throw RangeError(`Type given to setBlockType should be a textblock`);let a=e.steps.length;e.doc.nodesBetween(t,n,(t,n)=>{let o=typeof i==`function`?i(t):i;if(t.isTextblock&&!t.hasMarkup(r,o)&&Kje(e.doc,e.mapping.slice(a).map(n),r)){let i=null;if(r.schema.linebreakReplacement){let e=r.whitespace==`pre`,t=!!r.contentMatch.matchType(r.schema.linebreakReplacement);e&&!t?i=!1:!e&&t&&(i=!0)}i===!1&&AJ(e,t,n,a),TJ(e,e.mapping.slice(a).map(n,1),r,void 0,i===null);let s=e.mapping.slice(a),c=s.map(n,1),l=s.map(n+t.nodeSize,1);return e.step(new CJ(c,l,c+1,l-1,new hq(lq.from(r.create(o,null,t.marks)),0,0),1,!0)),i===!0&&kJ(e,t,n,a),!1}})}function kJ(e,t,n,r){t.forEach((i,a)=>{if(i.isText){let o,s=/\r?\n|\r/g;for(;o=s.exec(i.text);){let i=e.mapping.slice(r).map(n+1+a+o.index);e.replaceWith(i,i+1,t.type.schema.linebreakReplacement.create())}}})}function AJ(e,t,n,r){t.forEach((i,a)=>{if(i.type==i.type.schema.linebreakReplacement){let i=e.mapping.slice(r).map(n+1+a);e.replaceWith(i,i+1,t.type.schema.text(`
+`))}})}function Kje(e,t,n){let r=e.resolve(t),i=r.index();return r.parent.canReplaceWith(i,i+1,n)}function qje(e,t,n,r,i){let a=e.doc.nodeAt(t);if(!a)throw RangeError(`No node at given position`);n||=a.type;let o=n.create(r,null,i||a.marks);if(a.isLeaf)return e.replaceWith(t,t+a.nodeSize,o);if(!n.validContent(a.content))throw RangeError(`Invalid content for node type `+n.name);e.step(new CJ(t,t+a.nodeSize,t+1,t+a.nodeSize-1,new hq(lq.from(o),0,0),1,!0))}function jJ(e,t,n=1,r){let i=e.resolve(t),a=i.depth-n,o=r&&r[r.length-1]||i.parent;if(a<0||i.parent.type.spec.isolating||!i.parent.canReplace(i.index(),i.parent.childCount)||!o.type.validContent(i.parent.content.cutByIndex(i.index(),i.parent.childCount)))return!1;for(let e=i.depth-1,t=n-2;e>a;e--,t--){let n=i.node(e),a=i.index(e);if(n.type.spec.isolating)return!1;let o=n.content.cutByIndex(a,n.childCount),s=r&&r[t+1];s&&(o=o.replaceChild(0,s.type.create(s.attrs)));let c=r&&r[t]||n;if(!n.canReplace(a+1,n.childCount)||!c.type.validContent(o))return!1}let s=i.indexAfter(a),c=r&&r[0];return i.node(a).canReplaceWith(s,s,c?c.type:i.node(a+1).type)}function Jje(e,t,n=1,r){let i=e.doc.resolve(t),a=lq.empty,o=lq.empty;for(let e=i.depth,t=i.depth-n,s=n-1;e>t;e--,s--){a=lq.from(i.node(e).copy(a));let t=r&&r[s];o=lq.from(t?t.type.create(t.attrs,o):i.node(e).copy(o))}e.step(new SJ(t,t,new hq(a.append(o),n,n),!0))}function MJ(e,t){let n=e.resolve(t),r=n.index();return NJ(n.nodeBefore,n.nodeAfter)&&n.parent.canReplace(r,r+1)}function Yje(e,t){t.content.size||e.type.compatibleContent(t.type);let n=e.contentMatchAt(e.childCount),{linebreakReplacement:r}=e.type.schema;for(let i=0;i<t.childCount;i++){let a=t.child(i),o=a.type==r?e.type.schema.nodes.text:a.type;if(n=n.matchType(o),!n||!e.type.allowsMarks(a.marks))return!1}return n.validEnd}function NJ(e,t){return!!(e&&t&&!e.isLeaf&&Yje(e,t))}function PJ(e,t,n=-1){let r=e.resolve(t);for(let e=r.depth;;e--){let i,a,o=r.index(e);if(e==r.depth?(i=r.nodeBefore,a=r.nodeAfter):n>0?(i=r.node(e+1),o++,a=r.node(e).maybeChild(o)):(i=r.node(e).maybeChild(o-1),a=r.node(e+1)),i&&!i.isTextblock&&NJ(i,a)&&r.node(e).canReplace(o,o+1))return t;if(e==0)break;t=n<0?r.before(e):r.after(e)}}function Xje(e,t,n){let r=null,{linebreakReplacement:i}=e.doc.type.schema,a=e.doc.resolve(t-n),o=a.node().type;if(i&&o.inlineContent){let e=o.whitespace==`pre`,t=!!o.contentMatch.matchType(i);e&&!t?r=!1:!e&&t&&(r=!0)}let s=e.steps.length;if(r===!1){let r=e.doc.resolve(t+n);AJ(e,r.node(),r.before(),s)}o.inlineContent&&TJ(e,t+n-1,o,a.node().contentMatchAt(a.index()),r==null);let c=e.mapping.slice(s),l=c.map(t-n);if(e.step(new SJ(l,c.map(t+n,-1),hq.empty,!0)),r===!0){let t=e.doc.resolve(l);kJ(e,t.node(),t.before(),e.steps.length)}return e}function Zje(e,t,n){let r=e.resolve(t);if(r.parent.canReplaceWith(r.index(),r.index(),n))return t;if(r.parentOffset==0)for(let e=r.depth-1;e>=0;e--){let t=r.index(e);if(r.node(e).canReplaceWith(t,t,n))return r.before(e+1);if(t>0)return null}if(r.parentOffset==r.parent.content.size)for(let e=r.depth-1;e>=0;e--){let t=r.indexAfter(e);if(r.node(e).canReplaceWith(t,t,n))return r.after(e+1);if(t<r.node(e).childCount)return null}return null}function FJ(e,t,n){let r=e.resolve(t);if(!n.content.size)return t;let i=n.content;for(let e=0;e<n.openStart;e++)i=i.firstChild.content;for(let e=1;e<=(n.openStart==0&&n.size?2:1);e++)for(let t=r.depth;t>=0;t--){let n=t==r.depth?0:r.pos<=(r.start(t+1)+r.end(t+1))/2?-1:1,a=r.index(t)+ +(n>0),o=r.node(t),s=!1;if(e==1)s=o.canReplace(a,a,i);else{let e=o.contentMatchAt(a).findWrapping(i.firstChild.type);s=e&&o.canReplaceWith(a,a,e[0])}if(s)return n==0?r.pos:n<0?r.before(t+1):r.after(t+1)}return null}function IJ(e,t,n=t,r=hq.empty){if(t==n&&!r.size)return null;let i=e.resolve(t),a=e.resolve(n);return LJ(i,a,r)?new SJ(t,n,r):new Qje(i,a,r).fit()}function LJ(e,t,n){return!n.openStart&&!n.openEnd&&e.start()==t.start()&&e.parent.canReplace(e.index(),t.index(),n.content)}var Qje=class{constructor(e,t,n){this.$from=e,this.$to=t,this.unplaced=n,this.frontier=[],this.placed=lq.empty;for(let t=0;t<=e.depth;t++){let n=e.node(t);this.frontier.push({type:n.type,match:n.contentMatchAt(e.indexAfter(t))})}for(let t=e.depth;t>0;t--)this.placed=lq.from(e.node(t).copy(this.placed))}get depth(){return this.frontier.length-1}fit(){for(;this.unplaced.size;){let e=this.findFittable();e?this.placeNodes(e):this.openMore()||this.dropNode()}let e=this.mustMoveInline(),t=this.placed.size-this.depth-this.$from.depth,n=this.$from,r=this.close(e<0?this.$to:n.doc.resolve(e));if(!r)return null;let i=this.placed,a=n.depth,o=r.depth;for(;a&&o&&i.childCount==1;)i=i.firstChild.content,a--,o--;let s=new hq(i,a,o);return e>-1?new CJ(n.pos,e,this.$to.pos,this.$to.end(),s,t):s.size||n.pos!=this.$to.pos?new SJ(n.pos,r.pos,s):null}findFittable(){let e=this.unplaced.openStart;for(let t=this.unplaced.content,n=0,r=this.unplaced.openEnd;n<e;n++){let i=t.firstChild;if(t.childCount>1&&(r=0),i.type.spec.isolating&&r<=n){e=n;break}t=i.content}for(let t=1;t<=2;t++)for(let n=t==1?e:this.unplaced.openStart;n>=0;n--){let e,r=null;n?(r=BJ(this.unplaced.content,n-1).firstChild,e=r.content):e=this.unplaced.content;let i=e.firstChild;for(let e=this.depth;e>=0;e--){let{type:a,match:o}=this.frontier[e],s,c=null;if(t==1&&(i?o.matchType(i.type)||(c=o.fillBefore(lq.from(i),!1)):r&&a.compatibleContent(r.type)))return{sliceDepth:n,frontierDepth:e,parent:r,inject:c};if(t==2&&i&&(s=o.findWrapping(i.type)))return{sliceDepth:n,frontierDepth:e,parent:r,wrap:s};if(r&&o.matchType(r.type))break}}}openMore(){let{content:e,openStart:t,openEnd:n}=this.unplaced;return UJ(e,-1)<=t?!1:(this.unplaced.size>1&&UJ(e,1)>n&&n++,this.unplaced=new hq(e,t+1,n),!0)}dropNode(){let{content:e,openStart:t,openEnd:n}=this.unplaced,r=BJ(e,t);if(r.childCount<=1&&t>0){let i=e.size-t<=t+r.size;this.unplaced=new hq(RJ(e,t-1,1),t-1,i?t-1:n)}else this.unplaced=new hq(RJ(e,t,1),t,n)}placeNodes({sliceDepth:e,frontierDepth:t,parent:n,inject:r,wrap:i}){for(;this.depth>t;)this.closeFrontierNode();if(i)for(let e=0;e<i.length;e++)this.openFrontierNode(i[e]);let a=this.unplaced,o=n?n.content:a.content,s=a.openStart-e,c=0,l=[],{match:u,type:d}=this.frontier[t];if(r){for(let e=0;e<r.childCount;e++)l.push(r.child(e));u=u.matchFragment(r)}let f=o.size+e-(a.content.size-a.openEnd);for(;c<o.childCount;){let e=o.child(c),t=u.matchType(e.type);if(!t)break;c++,(c>1||s==0||e.content.size)&&(u=t,l.push(VJ(e.mark(d.allowedMarks(e.marks)),c==1?s:0,c==o.childCount?f:-1)))}let p=c==o.childCount;p||(f=-1),this.placed=zJ(this.placed,t,lq.from(l)),this.frontier[t].match=u,p&&f<0&&n&&n.type==this.frontier[this.depth].type&&this.frontier.length>1&&this.closeFrontierNode();for(let e=0,t=o;e<f;e++){let e=t.lastChild;this.frontier.push({type:e.type,match:e.contentMatchAt(e.childCount)}),t=e.content}this.unplaced=p?e==0?hq.empty:new hq(RJ(a.content,e-1,1),e-1,f<0?a.openEnd:e-1):new hq(RJ(a.content,e,c),a.openStart,a.openEnd)}mustMoveInline(){if(!this.$to.parent.isTextblock)return-1;let e=this.frontier[this.depth],t;if(!e.type.isTextblock||!HJ(this.$to,this.$to.depth,e.type,e.match,!1)||this.$to.depth==this.depth&&(t=this.findCloseLevel(this.$to))&&t.depth==this.depth)return-1;let{depth:n}=this.$to,r=this.$to.after(n);for(;n>1&&r==this.$to.end(--n);)++r;return r}findCloseLevel(e){scan:for(let t=Math.min(this.depth,e.depth);t>=0;t--){let{match:n,type:r}=this.frontier[t],i=t<e.depth&&e.end(t+1)==e.pos+(e.depth-(t+1)),a=HJ(e,t,r,n,i);if(a){for(let n=t-1;n>=0;n--){let{match:t,type:r}=this.frontier[n],i=HJ(e,n,r,t,!0);if(!i||i.childCount)continue scan}return{depth:t,fit:a,move:i?e.doc.resolve(e.after(t+1)):e}}}}close(e){let t=this.findCloseLevel(e);if(!t)return null;for(;this.depth>t.depth;)this.closeFrontierNode();t.fit.childCount&&(this.placed=zJ(this.placed,t.depth,t.fit)),e=t.move;for(let n=t.depth+1;n<=e.depth;n++){let t=e.node(n),r=t.type.contentMatch.fillBefore(t.content,!0,e.index(n));this.openFrontierNode(t.type,t.attrs,r)}return e}openFrontierNode(e,t=null,n){let r=this.frontier[this.depth];r.match=r.match.matchType(e),this.placed=zJ(this.placed,this.depth,lq.from(e.create(t,n))),this.frontier.push({type:e,match:e.contentMatch})}closeFrontierNode(){let e=this.frontier.pop().match.fillBefore(lq.empty,!0);e.childCount&&(this.placed=zJ(this.placed,this.frontier.length,e))}};function RJ(e,t,n){return t==0?e.cutByIndex(n,e.childCount):e.replaceChild(0,e.firstChild.copy(RJ(e.firstChild.content,t-1,n)))}function zJ(e,t,n){return t==0?e.append(n):e.replaceChild(e.childCount-1,e.lastChild.copy(zJ(e.lastChild.content,t-1,n)))}function BJ(e,t){for(let n=0;n<t;n++)e=e.firstChild.content;return e}function VJ(e,t,n){if(t<=0)return e;let r=e.content;return t>1&&(r=r.replaceChild(0,VJ(r.firstChild,t-1,r.childCount==1?n-1:0))),t>0&&(r=e.type.contentMatch.fillBefore(r).append(r),n<=0&&(r=r.append(e.type.contentMatch.matchFragment(r).fillBefore(lq.empty,!0)))),e.copy(r)}function HJ(e,t,n,r,i){let a=e.node(t),o=i?e.indexAfter(t):e.index(t);if(o==a.childCount&&!n.compatibleContent(a.type))return null;let s=r.fillBefore(a.content,!0,o);return s&&!$je(n,a.content,o)?s:null}function $je(e,t,n){for(let r=n;r<t.childCount;r++)if(!e.allowsMarks(t.child(r).marks))return!0;return!1}function eMe(e){return e.spec.defining||e.spec.definingForContent}function UJ(e,t){for(let n=0;;n++){let r=t<0?e.firstChild:e.lastChild;if(!r||r.isAtom)return n;e=r.content}}function tMe(e,t,n,r){if(!r.size)return e.deleteRange(t,n);let i=e.doc.resolve(t),a=e.doc.resolve(n);if(LJ(i,a,r))return e.step(new SJ(t,n,r));let o=GJ(i,a);o[o.length-1]==0&&o.pop();let s=-(i.depth+1);o.unshift(s);for(let e=i.depth,t=i.pos-1;e>0;e--,t--){let n=i.node(e).type.spec;if(n.defining||n.definingAsContext||n.isolating)break;o.indexOf(e)>-1?s=e:i.before(e)==t&&o.splice(1,0,-e)}let c=o.indexOf(s),l=[],u=r.openStart;for(let e=r.content,t=0;;t++){let n=e.firstChild;if(l.push(n),t==r.openStart)break;e=n.content}for(let e=u-1;e>=0;e--){let t=l[e],n=eMe(t.type);if(n&&!t.sameMarkup(i.node(Math.abs(s)-1)))u=e;else if(n||!t.type.isTextblock)break}for(let t=r.openStart;t>=0;t--){let s=(t+u+1)%(r.openStart+1),d=l[s];if(d)for(let t=0;t<o.length;t++){let l=o[(t+c)%o.length],u=!0;l<0&&(u=!1,l=-l);let f=i.node(l-1),p=i.index(l-1);if(f.canReplaceWith(p,p,d.type,d.marks))return e.replace(i.before(l),u?a.after(l):n,new hq(WJ(r.content,0,r.openStart,s),s,r.openEnd))}}let d=e.steps.length;for(let s=o.length-1;s>=0&&(e.replace(t,n,r),!(e.steps.length>d));s--){let e=o[s];e<0||(t=i.before(e),n=a.after(e))}}function WJ(e,t,n,r,i){if(t<n){let i=e.firstChild;e=e.replaceChild(0,i.copy(WJ(i.content,t+1,n,r,i)))}if(t>r){let t=i.contentMatchAt(0),n=t.fillBefore(e).append(e);e=n.append(t.matchFragment(n).fillBefore(lq.empty,!0))}return e}function nMe(e,t,n,r){if(!r.isInline&&t==n&&e.doc.resolve(t).parent.content.size){let i=Zje(e.doc,t,r.type);i!=null&&(t=n=i)}e.replaceRange(t,n,new hq(lq.from(r),0,0))}function rMe(e,t,n){let r=e.doc.resolve(t),i=e.doc.resolve(n);if(r.parent.isTextblock&&i.parent.isTextblock&&r.start()!=i.start()&&r.parentOffset==0&&i.parentOffset==0){let a=r.sharedDepth(n),o=!1;for(let e=r.depth;e>a;e--)r.node(e).type.spec.isolating&&(o=!0);for(let e=i.depth;e>a;e--)i.node(e).type.spec.isolating&&(o=!0);if(!o){for(let e=r.depth;e>0&&t==r.start(e);e--)t=r.before(e);for(let e=i.depth;e>0&&n==i.start(e);e--)n=i.before(e);r=e.doc.resolve(t),i=e.doc.resolve(n)}}let a=GJ(r,i);for(let t=0;t<a.length;t++){let n=a[t],o=t==a.length-1;if(o&&n==0||r.node(n).type.contentMatch.validEnd)return e.delete(r.start(n),i.end(n));if(n>0&&(o||r.node(n-1).canReplace(r.index(n-1),i.indexAfter(n-1))))return e.delete(r.before(n),i.after(n))}for(let a=1;a<=r.depth&&a<=i.depth;a++)if(t-r.start(a)==r.depth-a&&n>r.end(a)&&i.end(a)-n!=i.depth-a&&r.start(a-1)==i.start(a-1)&&r.node(a-1).canReplace(r.index(a-1),i.index(a-1)))return e.delete(r.before(a),n);e.delete(t,n)}function GJ(e,t){let n=[],r=Math.min(e.depth,t.depth);for(let i=r;i>=0;i--){let r=e.start(i);if(r<e.pos-(e.depth-i)||t.end(i)>t.pos+(t.depth-i)||e.node(i).type.spec.isolating||t.node(i).type.spec.isolating)break;(r==t.start(i)||i==e.depth&&i==t.depth&&e.parent.inlineContent&&t.parent.inlineContent&&i&&t.start(i-1)==r-1)&&n.push(i)}return n}var KJ=class e extends hJ{constructor(e,t,n){super(),this.pos=e,this.attr=t,this.value=n}apply(e){let t=e.nodeAt(this.pos);if(!t)return gJ.fail(`No node at attribute step's position`);let n=Object.create(null);for(let e in t.attrs)n[e]=t.attrs[e];n[this.attr]=this.value;let r=t.type.create(n,null,t.marks);return gJ.fromReplace(e,this.pos,this.pos+1,new hq(lq.from(r),0,+!t.isLeaf))}getMap(){return fJ.empty}invert(t){return new e(this.pos,this.attr,t.nodeAt(this.pos).attrs[this.attr])}map(t){let n=t.mapResult(this.pos,1);return n.deletedAfter?null:new e(n.pos,this.attr,this.value)}toJSON(){return{stepType:`attr`,pos:this.pos,attr:this.attr,value:this.value}}static fromJSON(t,n){if(typeof n.pos!=`number`||typeof n.attr!=`string`)throw RangeError(`Invalid input for AttrStep.fromJSON`);return new e(n.pos,n.attr,n.value)}};hJ.jsonID(`attr`,KJ);var qJ=class e extends hJ{constructor(e,t){super(),this.attr=e,this.value=t}apply(e){let t=Object.create(null);for(let n in e.attrs)t[n]=e.attrs[n];t[this.attr]=this.value;let n=e.type.create(t,e.content,e.marks);return gJ.ok(n)}getMap(){return fJ.empty}invert(t){return new e(this.attr,t.attrs[this.attr])}map(e){return this}toJSON(){return{stepType:`docAttr`,attr:this.attr,value:this.value}}static fromJSON(t,n){if(typeof n.attr!=`string`)throw RangeError(`Invalid input for DocAttrStep.fromJSON`);return new e(n.attr,n.value)}};hJ.jsonID(`docAttr`,qJ);var JJ=class extends Error{};JJ=function e(t){let n=Error.call(this,t);return n.__proto__=e.prototype,n},JJ.prototype=Object.create(Error.prototype),JJ.prototype.constructor=JJ,JJ.prototype.name=`TransformError`;var YJ=class{constructor(e){this.doc=e,this.steps=[],this.docs=[],this.mapping=new pJ}get before(){return this.docs.length?this.docs[0]:this.doc}step(e){let t=this.maybeStep(e);if(t.failed)throw new JJ(t.failed);return this}maybeStep(e){let t=e.apply(this.doc);return t.failed||this.addStep(e,t.doc),t}get docChanged(){return this.steps.length>0}changedRange(){let e=1e9,t=-1e9;for(let n=0;n<this.mapping.maps.length;n++){let r=this.mapping.maps[n];n&&(e=r.map(e,1),t=r.map(t,-1)),r.forEach((n,r,i,a)=>{e=Math.min(e,i),t=Math.max(t,a)})}return e==1e9?null:{from:e,to:t}}addStep(e,t){this.docs.push(this.doc),this.steps.push(e),this.mapping.appendMap(e.getMap()),this.doc=t}replace(e,t=e,n=hq.empty){let r=IJ(this.doc,e,t,n);return r&&this.step(r),this}replaceWith(e,t,n){return this.replace(e,t,new hq(lq.from(n),0,0))}delete(e,t){return this.replace(e,t,hq.empty)}insert(e,t){return this.replaceWith(e,e,t)}replaceRange(e,t,n){return tMe(this,e,t,n),this}replaceRangeWith(e,t,n){return nMe(this,e,t,n),this}deleteRange(e,t){return rMe(this,e,t),this}lift(e,t){return Vje(this,e,t),this}join(e,t=1){return Xje(this,e,t),this}wrap(e,t){return Wje(this,e,t),this}setBlockType(e,t=e,n,r=null){return Gje(this,e,t,n,r),this}setNodeMarkup(e,t,n=null,r){return qje(this,e,t,n,r),this}setNodeAttribute(e,t,n){return this.step(new KJ(e,t,n)),this}setDocAttribute(e,t){return this.step(new qJ(e,t)),this}addNodeMark(e,t){return this.step(new bJ(e,t)),this}removeNodeMark(e,t){let n=this.doc.nodeAt(e);if(!n)throw RangeError(`No node at position `+e);if(t instanceof pq)t.isInSet(n.marks)&&this.step(new xJ(e,t));else{let r=n.marks,i,a=[];for(;i=t.isInSet(r);)a.push(new xJ(e,i)),r=i.removeFromSet(r);for(let e=a.length-1;e>=0;e--)this.step(a[e])}return this}split(e,t=1,n){return Jje(this,e,t,n),this}addMark(e,t,n){return Rje(this,e,t,n),this}removeMark(e,t,n){return zje(this,e,t,n),this}clearIncompatible(e,t,n){return TJ(this,e,t,n),this}},XJ=Object.create(null),ZJ=class{constructor(e,t,n){this.$anchor=e,this.$head=t,this.ranges=n||[new iMe(e.min(t),e.max(t))]}get anchor(){return this.$anchor.pos}get head(){return this.$head.pos}get from(){return this.$from.pos}get to(){return this.$to.pos}get $from(){return this.ranges[0].$from}get $to(){return this.ranges[0].$to}get empty(){let e=this.ranges;for(let t=0;t<e.length;t++)if(e[t].$from.pos!=e[t].$to.pos)return!1;return!0}content(){return this.$from.doc.slice(this.from,this.to,!0)}replace(e,t=hq.empty){let n=t.content.lastChild,r=null;for(let e=0;e<t.openEnd;e++)r=n,n=n.lastChild;let i=e.steps.length,a=this.ranges;for(let o=0;o<a.length;o++){let{$from:s,$to:c}=a[o],l=e.mapping.slice(i);e.replaceRange(l.map(s.pos),l.map(c.pos),o?hq.empty:t),o==0&&aY(e,i,(n?n.isInline:r&&r.isTextblock)?-1:1)}}replaceWith(e,t){let n=e.steps.length,r=this.ranges;for(let i=0;i<r.length;i++){let{$from:a,$to:o}=r[i],s=e.mapping.slice(n),c=s.map(a.pos),l=s.map(o.pos);i?e.deleteRange(c,l):(e.replaceRangeWith(c,l,t),aY(e,n,t.isInline?-1:1))}}static findFrom(e,t,n=!1){let r=e.parent.inlineContent?new eY(e):iY(e.node(0),e.parent,e.pos,e.index(),t,n);if(r)return r;for(let r=e.depth-1;r>=0;r--){let i=t<0?iY(e.node(0),e.node(r),e.before(r+1),e.index(r),t,n):iY(e.node(0),e.node(r),e.after(r+1),e.index(r)+1,t,n);if(i)return i}return null}static near(e,t=1){return this.findFrom(e,t)||this.findFrom(e,-t)||new rY(e.node(0))}static atStart(e){return iY(e,e,0,0,1)||new rY(e)}static atEnd(e){return iY(e,e,e.content.size,e.childCount,-1)||new rY(e)}static fromJSON(e,t){if(!t||!t.type)throw RangeError(`Invalid input for Selection.fromJSON`);let n=XJ[t.type];if(!n)throw RangeError(`No selection type ${t.type} defined`);return n.fromJSON(e,t)}static jsonID(e,t){if(e in XJ)throw RangeError(`Duplicate use of selection JSON ID `+e);return XJ[e]=t,t.prototype.jsonID=e,t}getBookmark(){return eY.between(this.$anchor,this.$head).getBookmark()}};ZJ.prototype.visible=!0;var iMe=class{constructor(e,t){this.$from=e,this.$to=t}},QJ=!1;function $J(e){!QJ&&!e.parent.inlineContent&&(QJ=!0,console.warn(`TextSelection endpoint not pointing into a node with inline content (`+e.parent.type.name+`)`))}var eY=class e extends ZJ{constructor(e,t=e){$J(e),$J(t),super(e,t)}get $cursor(){return this.$anchor.pos==this.$head.pos?this.$head:null}map(t,n){let r=t.resolve(n.map(this.head));if(!r.parent.inlineContent)return ZJ.near(r);let i=t.resolve(n.map(this.anchor));return new e(i.parent.inlineContent?i:r,r)}replace(e,t=hq.empty){if(super.replace(e,t),t==hq.empty){let t=this.$from.marksAcross(this.$to);t&&e.ensureMarks(t)}}eq(t){return t instanceof e&&t.anchor==this.anchor&&t.head==this.head}getBookmark(){return new tY(this.anchor,this.head)}toJSON(){return{type:`text`,anchor:this.anchor,head:this.head}}static fromJSON(t,n){if(typeof n.anchor!=`number`||typeof n.head!=`number`)throw RangeError(`Invalid input for TextSelection.fromJSON`);return new e(t.resolve(n.anchor),t.resolve(n.head))}static create(e,t,n=t){let r=e.resolve(t);return new this(r,n==t?r:e.resolve(n))}static between(t,n,r){let i=t.pos-n.pos;if((!r||i)&&(r=i>=0?1:-1),!n.parent.inlineContent){let e=ZJ.findFrom(n,r,!0)||ZJ.findFrom(n,-r,!0);if(e)n=e.$head;else return ZJ.near(n,r)}return t.parent.inlineContent||(i==0?t=n:(t=(ZJ.findFrom(t,-r,!0)||ZJ.findFrom(t,r,!0)).$anchor,t.pos<n.pos!=i<0&&(t=n))),new e(t,n)}};ZJ.jsonID(`text`,eY);var tY=class e{constructor(e,t){this.anchor=e,this.head=t}map(t){return new e(t.map(this.anchor),t.map(this.head))}resolve(e){return eY.between(e.resolve(this.anchor),e.resolve(this.head))}},nY=class e extends ZJ{constructor(e){let t=e.nodeAfter,n=e.node(0).resolve(e.pos+t.nodeSize);super(e,n),this.node=t}map(t,n){let{deleted:r,pos:i}=n.mapResult(this.anchor),a=t.resolve(i);return r?ZJ.near(a):new e(a)}content(){return new hq(lq.from(this.node),0,0)}eq(t){return t instanceof e&&t.anchor==this.anchor}toJSON(){return{type:`node`,anchor:this.anchor}}getBookmark(){return new aMe(this.anchor)}static fromJSON(t,n){if(typeof n.anchor!=`number`)throw RangeError(`Invalid input for NodeSelection.fromJSON`);return new e(t.resolve(n.anchor))}static create(t,n){return new e(t.resolve(n))}static isSelectable(e){return!e.isText&&e.type.spec.selectable!==!1}};nY.prototype.visible=!1,ZJ.jsonID(`node`,nY);var aMe=class e{constructor(e){this.anchor=e}map(t){let{deleted:n,pos:r}=t.mapResult(this.anchor);return n?new tY(r,r):new e(r)}resolve(e){let t=e.resolve(this.anchor),n=t.nodeAfter;return n&&nY.isSelectable(n)?new nY(t):ZJ.near(t)}},rY=class e extends ZJ{constructor(e){super(e.resolve(0),e.resolve(e.content.size))}replace(e,t=hq.empty){if(t==hq.empty){e.delete(0,e.doc.content.size);let t=ZJ.atStart(e.doc);t.eq(e.selection)||e.setSelection(t)}else super.replace(e,t)}toJSON(){return{type:`all`}}static fromJSON(t){return new e(t)}map(t){return new e(t)}eq(t){return t instanceof e}getBookmark(){return oMe}};ZJ.jsonID(`all`,rY);var oMe={map(){return this},resolve(e){return new rY(e)}};function iY(e,t,n,r,i,a=!1){if(t.inlineContent)return eY.create(e,n);for(let o=r-(i>0?0:1);i>0?o<t.childCount:o>=0;o+=i){let r=t.child(o);if(!r.isAtom){let t=iY(e,r,n+i,i<0?r.childCount:0,i,a);if(t)return t}else if(!a&&nY.isSelectable(r))return nY.create(e,n-(i<0?r.nodeSize:0));n+=r.nodeSize*i}return null}function aY(e,t,n){let r=e.steps.length-1;if(r<t)return;let i=e.steps[r];if(!(i instanceof SJ||i instanceof CJ))return;let a=e.mapping.maps[r],o;a.forEach((e,t,n,r)=>{o??=r}),e.setSelection(ZJ.near(e.doc.resolve(o),n))}var oY=1,sY=2,cY=4,sMe=class extends YJ{constructor(e){super(e.doc),this.curSelectionFor=0,this.updated=0,this.meta=Object.create(null),this.time=Date.now(),this.curSelection=e.selection,this.storedMarks=e.storedMarks}get selection(){return this.curSelectionFor<this.steps.length&&(this.curSelection=this.curSelection.map(this.doc,this.mapping.slice(this.curSelectionFor)),this.curSelectionFor=this.steps.length),this.curSelection}setSelection(e){if(e.$from.doc!=this.doc)throw RangeError(`Selection passed to setSelection must point at the current document`);return this.curSelection=e,this.curSelectionFor=this.steps.length,this.updated=(this.updated|oY)&-3,this.storedMarks=null,this}get selectionSet(){return(this.updated&oY)>0}setStoredMarks(e){return this.storedMarks=e,this.updated|=sY,this}ensureMarks(e){return pq.sameSet(this.storedMarks||this.selection.$from.marks(),e)||this.setStoredMarks(e),this}addStoredMark(e){return this.ensureMarks(e.addToSet(this.storedMarks||this.selection.$head.marks()))}removeStoredMark(e){return this.ensureMarks(e.removeFromSet(this.storedMarks||this.selection.$head.marks()))}get storedMarksSet(){return(this.updated&sY)>0}addStep(e,t){super.addStep(e,t),this.updated&=-3,this.storedMarks=null}setTime(e){return this.time=e,this}replaceSelection(e){return this.selection.replace(this,e),this}replaceSelectionWith(e,t=!0){let n=this.selection;return t&&(e=e.mark(this.storedMarks||(n.empty?n.$from.marks():n.$from.marksAcross(n.$to)||pq.none))),n.replaceWith(this,e),this}deleteSelection(){return this.selection.replace(this),this}insertText(e,t,n){let r=this.doc.type.schema;if(t==null)return e?this.replaceSelectionWith(r.text(e),!0):this.deleteSelection();{if(n??=t,!e)return this.deleteRange(t,n);let i=this.storedMarks;if(!i){let e=this.doc.resolve(t);i=n==t?e.marks():e.marksAcross(this.doc.resolve(n))}return this.replaceRangeWith(t,n,r.text(e,i)),!this.selection.empty&&this.selection.to==t+e.length&&this.setSelection(ZJ.near(this.selection.$to)),this}}setMeta(e,t){return this.meta[typeof e==`string`?e:e.key]=t,this}getMeta(e){return this.meta[typeof e==`string`?e:e.key]}get isGeneric(){for(let e in this.meta)return!1;return!0}scrollIntoView(){return this.updated|=cY,this}get scrolledIntoView(){return(this.updated&cY)>0}};function lY(e,t){return!t||!e?e:e.bind(t)}var uY=class{constructor(e,t,n){this.name=e,this.init=lY(t.init,n),this.apply=lY(t.apply,n)}},cMe=[new uY(`doc`,{init(e){return e.doc||e.schema.topNodeType.createAndFill()},apply(e){return e.doc}}),new uY(`selection`,{init(e,t){return e.selection||ZJ.atStart(t.doc)},apply(e){return e.selection}}),new uY(`storedMarks`,{init(e){return e.storedMarks||null},apply(e,t,n,r){return r.selection.$cursor?e.storedMarks:null}}),new uY(`scrollToSelection`,{init(){return 0},apply(e,t){return e.scrolledIntoView?t+1:t}})],dY=class{constructor(e,t){this.schema=e,this.plugins=[],this.pluginsByKey=Object.create(null),this.fields=cMe.slice(),t&&t.forEach(e=>{if(this.pluginsByKey[e.key])throw RangeError(`Adding different instances of a keyed plugin (`+e.key+`)`);this.plugins.push(e),this.pluginsByKey[e.key]=e,e.spec.state&&this.fields.push(new uY(e.key,e.spec.state,e))})}},fY=class e{constructor(e){this.config=e}get schema(){return this.config.schema}get plugins(){return this.config.plugins}apply(e){return this.applyTransaction(e).state}filterTransaction(e,t=-1){for(let n=0;n<this.config.plugins.length;n++)if(n!=t){let t=this.config.plugins[n];if(t.spec.filterTransaction&&!t.spec.filterTransaction.call(t,e,this))return!1}return!0}applyTransaction(e){if(!this.filterTransaction(e))return{state:this,transactions:[]};let t=[e],n=this.applyInner(e),r=null;for(;;){let i=!1;for(let a=0;a<this.config.plugins.length;a++){let o=this.config.plugins[a];if(o.spec.appendTransaction){let s=r?r[a].n:0,c=r?r[a].state:this,l=s<t.length&&o.spec.appendTransaction.call(o,s?t.slice(s):t,c,n);if(l&&n.filterTransaction(l,a)){if(l.setMeta(`appendedTransaction`,e),!r){r=[];for(let e=0;e<this.config.plugins.length;e++)r.push(e<a?{state:n,n:t.length}:{state:this,n:0})}t.push(l),n=n.applyInner(l),i=!0}r&&(r[a]={state:n,n:t.length})}}if(!i)return{state:n,transactions:t}}}applyInner(t){if(!t.before.eq(this.doc))throw RangeError(`Applying a mismatched transaction`);let n=new e(this.config),r=this.config.fields;for(let e=0;e<r.length;e++){let i=r[e];n[i.name]=i.apply(t,this[i.name],this,n)}return n}get tr(){return new sMe(this)}static create(t){let n=new dY(t.doc?t.doc.type.schema:t.schema,t.plugins),r=new e(n);for(let e=0;e<n.fields.length;e++)r[n.fields[e].name]=n.fields[e].init(t,r);return r}reconfigure(t){let n=new dY(this.schema,t.plugins),r=n.fields,i=new e(n);for(let e=0;e<r.length;e++){let n=r[e].name;i[n]=this.hasOwnProperty(n)?this[n]:r[e].init(t,i)}return i}toJSON(e){let t={doc:this.doc.toJSON(),selection:this.selection.toJSON()};if(this.storedMarks&&(t.storedMarks=this.storedMarks.map(e=>e.toJSON())),e&&typeof e==`object`)for(let n in e){if(n==`doc`||n==`selection`)throw RangeError("The JSON fields `doc` and `selection` are reserved");let r=e[n],i=r.spec.state;i&&i.toJSON&&(t[n]=i.toJSON.call(r,this[r.key]))}return t}static fromJSON(t,n,r){if(!n)throw RangeError(`Invalid input for EditorState.fromJSON`);if(!t.schema)throw RangeError(`Required config field 'schema' missing`);let i=new dY(t.schema,t.plugins),a=new e(i);return i.fields.forEach(e=>{if(e.name==`doc`)a.doc=kq.fromJSON(t.schema,n.doc);else if(e.name==`selection`)a.selection=ZJ.fromJSON(a.doc,n.selection);else if(e.name==`storedMarks`)n.storedMarks&&(a.storedMarks=n.storedMarks.map(t.schema.markFromJSON));else{if(r)for(let i in r){let o=r[i],s=o.spec.state;if(o.key==e.name&&s&&s.fromJSON&&Object.prototype.hasOwnProperty.call(n,i)){a[e.name]=s.fromJSON.call(o,t,n[i],a);return}}a[e.name]=e.init(t,a)}}),a}};function pY(e,t,n){for(let r in e){let i=e[r];i instanceof Function?i=i.bind(t):r==`handleDOMEvents`&&(i=pY(i,t,{})),n[r]=i}return n}var mY=class{constructor(e){this.spec=e,this.props={},e.props&&pY(e.props,this,this.props),this.key=e.key?e.key.key:gY(`plugin`)}getState(e){return e[this.key]}},hY=Object.create(null);function gY(e){return e in hY?e+`$`+ ++hY[e]:(hY[e]=0,e+`$`)}var _Y=class{constructor(e=`key`){this.key=gY(e)}get(e){return e.config.pluginsByKey[this.key]}getState(e){return e[this.key]}},vY=(e,t)=>e.selection.empty?!1:(t&&t(e.tr.deleteSelection().scrollIntoView()),!0);function yY(e,t){let{$cursor:n}=e.selection;return!n||(t?!t.endOfTextblock(`backward`,e):n.parentOffset>0)?null:n}var bY=(e,t,n)=>{let r=yY(e,n);if(!r)return!1;let i=wY(r);if(!i){let n=r.blockRange(),i=n&&EJ(n);return i==null?!1:(t&&t(e.tr.lift(n,i).scrollIntoView()),!0)}let a=i.nodeBefore;if(PY(e,i,t,-1))return!0;if(r.parent.content.size==0&&(SY(a,`end`)||nY.isSelectable(a)))for(let n=r.depth;;n--){let o=IJ(e.doc,r.before(n),r.after(n),hq.empty);if(o&&o.slice.size<o.to-o.from){if(t){let n=e.tr.step(o);n.setSelection(SY(a,`end`)?ZJ.findFrom(n.doc.resolve(n.mapping.map(i.pos,-1)),-1):nY.create(n.doc,i.pos-a.nodeSize)),t(n.scrollIntoView())}return!0}if(n==1||r.node(n-1).childCount>1)break}return a.isAtom&&i.depth==r.depth-1?(t&&t(e.tr.delete(i.pos-a.nodeSize,i.pos).scrollIntoView()),!0):!1},lMe=(e,t,n)=>{let r=yY(e,n);if(!r)return!1;let i=wY(r);return i?xY(e,i,t):!1},uMe=(e,t,n)=>{let r=TY(e,n);if(!r)return!1;let i=OY(r);return i?xY(e,i,t):!1};function xY(e,t,n){let r=t.nodeBefore,i=t.pos-1;for(;!r.isTextblock;i--){if(r.type.spec.isolating)return!1;let e=r.lastChild;if(!e)return!1;r=e}let a=t.nodeAfter,o=t.pos+1;for(;!a.isTextblock;o++){if(a.type.spec.isolating)return!1;let e=a.firstChild;if(!e)return!1;a=e}let s=IJ(e.doc,i,o,hq.empty);if(!s||s.from!=i||s instanceof SJ&&s.slice.size>=o-i)return!1;if(n){let t=e.tr.step(s);t.setSelection(eY.create(t.doc,i)),n(t.scrollIntoView())}return!0}function SY(e,t,n=!1){for(let r=e;r;r=t==`start`?r.firstChild:r.lastChild){if(r.isTextblock)return!0;if(n&&r.childCount!=1)return!1}return!1}var CY=(e,t,n)=>{let{$head:r,empty:i}=e.selection,a=r;if(!i)return!1;if(r.parent.isTextblock){if(n?!n.endOfTextblock(`backward`,e):r.parentOffset>0)return!1;a=wY(r)}let o=a&&a.nodeBefore;return!o||!nY.isSelectable(o)?!1:(t&&t(e.tr.setSelection(nY.create(e.doc,a.pos-o.nodeSize)).scrollIntoView()),!0)};function wY(e){if(!e.parent.type.spec.isolating)for(let t=e.depth-1;t>=0;t--){if(e.index(t)>0)return e.doc.resolve(e.before(t+1));if(e.node(t).type.spec.isolating)break}return null}function TY(e,t){let{$cursor:n}=e.selection;return!n||(t?!t.endOfTextblock(`forward`,e):n.parentOffset<n.parent.content.size)?null:n}var EY=(e,t,n)=>{let r=TY(e,n);if(!r)return!1;let i=OY(r);if(!i)return!1;let a=i.nodeAfter;if(PY(e,i,t,1))return!0;if(r.parent.content.size==0&&(SY(a,`start`)||nY.isSelectable(a))){let n=IJ(e.doc,r.before(),r.after(),hq.empty);if(n&&n.slice.size<n.to-n.from){if(t){let r=e.tr.step(n);r.setSelection(SY(a,`start`)?ZJ.findFrom(r.doc.resolve(r.mapping.map(i.pos)),1):nY.create(r.doc,r.mapping.map(i.pos))),t(r.scrollIntoView())}return!0}}return a.isAtom&&i.depth==r.depth-1?(t&&t(e.tr.delete(i.pos,i.pos+a.nodeSize).scrollIntoView()),!0):!1},DY=(e,t,n)=>{let{$head:r,empty:i}=e.selection,a=r;if(!i)return!1;if(r.parent.isTextblock){if(n?!n.endOfTextblock(`forward`,e):r.parentOffset<r.parent.content.size)return!1;a=OY(r)}let o=a&&a.nodeAfter;return!o||!nY.isSelectable(o)?!1:(t&&t(e.tr.setSelection(nY.create(e.doc,a.pos)).scrollIntoView()),!0)};function OY(e){if(!e.parent.type.spec.isolating)for(let t=e.depth-1;t>=0;t--){let n=e.node(t);if(e.index(t)+1<n.childCount)return e.doc.resolve(e.after(t+1));if(n.type.spec.isolating)break}return null}var dMe=(e,t)=>{let n=e.selection,r=n instanceof nY,i;if(r){if(n.node.isTextblock||!MJ(e.doc,n.from))return!1;i=n.from}else if(i=PJ(e.doc,n.from,-1),i==null)return!1;if(t){let n=e.tr.join(i);r&&n.setSelection(nY.create(n.doc,i-e.doc.resolve(i).nodeBefore.nodeSize)),t(n.scrollIntoView())}return!0},fMe=(e,t)=>{let n=e.selection,r;if(n instanceof nY){if(n.node.isTextblock||!MJ(e.doc,n.to))return!1;r=n.to}else if(r=PJ(e.doc,n.to,1),r==null)return!1;return t&&t(e.tr.join(r).scrollIntoView()),!0},pMe=(e,t)=>{let{$from:n,$to:r}=e.selection,i=n.blockRange(r),a=i&&EJ(i);return a==null?!1:(t&&t(e.tr.lift(i,a).scrollIntoView()),!0)},kY=(e,t)=>{let{$head:n,$anchor:r}=e.selection;return!n.parent.type.spec.code||!n.sameParent(r)?!1:(t&&t(e.tr.insertText(`
+`).scrollIntoView()),!0)};function AY(e){for(let t=0;t<e.edgeCount;t++){let{type:n}=e.edge(t);if(n.isTextblock&&!n.hasRequiredAttrs())return n}return null}var jY=(e,t)=>{let{$head:n,$anchor:r}=e.selection;if(!n.parent.type.spec.code||!n.sameParent(r))return!1;let i=n.node(-1),a=n.indexAfter(-1),o=AY(i.contentMatchAt(a));if(!o||!i.canReplaceWith(a,a,o))return!1;if(t){let r=n.after(),i=e.tr.replaceWith(r,r,o.createAndFill());i.setSelection(ZJ.near(i.doc.resolve(r),1)),t(i.scrollIntoView())}return!0},MY=(e,t)=>{let n=e.selection,{$from:r,$to:i}=n;if(n instanceof rY||r.parent.inlineContent||i.parent.inlineContent)return!1;let a=AY(i.parent.contentMatchAt(i.indexAfter()));if(!a||!a.isTextblock)return!1;if(t){let n=(!r.parentOffset&&i.index()<i.parent.childCount?r:i).pos,o=e.tr.insert(n,a.createAndFill());o.setSelection(eY.create(o.doc,n+1)),t(o.scrollIntoView())}return!0},NY=(e,t)=>{let{$cursor:n}=e.selection;if(!n||n.parent.content.size)return!1;if(n.depth>1&&n.after()!=n.end(-1)){let r=n.before();if(jJ(e.doc,r))return t&&t(e.tr.split(r).scrollIntoView()),!0}let r=n.blockRange(),i=r&&EJ(r);return i==null?!1:(t&&t(e.tr.lift(r,i).scrollIntoView()),!0)};function mMe(e){return(t,n)=>{if(t.selection instanceof nY&&t.selection.node.isBlock){let{$from:e}=t.selection;return!e.parentOffset||!jJ(t.doc,e.pos)?!1:(n&&n(t.tr.split(e.pos).scrollIntoView()),!0)}if(!t.selection.$from.depth)return!1;let r=t.tr;!t.selection.empty&&(t.selection instanceof eY||t.selection instanceof rY)&&r.deleteSelection();let{$from:i}=r.selection,a=r.steps.length,o=[],s,c,l=!1,u=!1;for(let t=i.depth;;t--)if(i.node(t).isBlock){l=i.end(t)==i.pos+(i.depth-t),u=i.start(t)==i.pos-(i.depth-t),c=AY(i.node(t-1).contentMatchAt(i.indexAfter(t-1)));let n=e&&e(i.parent,l,i);o.unshift(n||(l&&c?{type:c}:null)),s=t;break}else{if(t==1)return!1;o.unshift(null)}let d=i.pos,f=jJ(r.doc,d,o.length,o);if(f||=(o[0]=c?{type:c}:null,jJ(r.doc,d,o.length,o)),!f)return!1;if(r.split(d,o.length,o),!l&&u&&i.node(s).type!=c){let e=r.mapping.slice(a),t=e.map(i.before(s)),n=r.doc.resolve(t);c&&i.node(s-1).canReplaceWith(n.index(),n.index()+1,c)&&r.setNodeMarkup(e.map(i.before(s)),c)}return n&&n(r.scrollIntoView()),!0}}var hMe=mMe(),gMe=(e,t)=>{let{$from:n,to:r}=e.selection,i,a=n.sharedDepth(r);return a==0?!1:(i=n.before(a),t&&t(e.tr.setSelection(nY.create(e.doc,i))),!0)},_Me=(e,t)=>(t&&t(e.tr.setSelection(new rY(e.doc))),!0);function vMe(e,t,n){let r=t.nodeBefore,i=t.nodeAfter,a=t.index();return!r||!i||!r.type.compatibleContent(i.type)?!1:!r.content.size&&t.parent.canReplace(a-1,a)?(n&&n(e.tr.delete(t.pos-r.nodeSize,t.pos).scrollIntoView()),!0):!t.parent.canReplace(a,a+1)||!(i.isTextblock||MJ(e.doc,t.pos))?!1:(n&&n(e.tr.join(t.pos).scrollIntoView()),!0)}function PY(e,t,n,r){let i=t.nodeBefore,a=t.nodeAfter,o,s,c=i.type.spec.isolating||a.type.spec.isolating;if(!c&&vMe(e,t,n))return!0;let l=!c&&t.parent.canReplace(t.index(),t.index()+1);if(l&&(o=(s=i.contentMatchAt(i.childCount)).findWrapping(a.type))&&s.matchType(o[0]||a.type).validEnd){if(n){let r=t.pos+a.nodeSize,s=lq.empty;for(let e=o.length-1;e>=0;e--)s=lq.from(o[e].create(null,s));s=lq.from(i.copy(s));let c=e.tr.step(new CJ(t.pos-1,r,t.pos,r,new hq(s,1,0),o.length,!0)),l=c.doc.resolve(r+2*o.length);l.nodeAfter&&l.nodeAfter.type==i.type&&MJ(c.doc,l.pos)&&c.join(l.pos),n(c.scrollIntoView())}return!0}let u=a.type.spec.isolating||r>0&&c?null:ZJ.findFrom(t,1),d=u&&u.$from.blockRange(u.$to),f=d&&EJ(d);if(f!=null&&f>=t.depth)return n&&n(e.tr.lift(d,f).scrollIntoView()),!0;if(l&&SY(a,`start`,!0)&&SY(i,`end`)){let r=i,o=[];for(;o.push(r),!r.isTextblock;)r=r.lastChild;let s=a,c=1;for(;!s.isTextblock;s=s.firstChild)c++;if(r.canReplace(r.childCount,r.childCount,s.content)){if(n){let r=lq.empty;for(let e=o.length-1;e>=0;e--)r=lq.from(o[e].copy(r));n(e.tr.step(new CJ(t.pos-o.length,t.pos+a.nodeSize,t.pos+c,t.pos+a.nodeSize-c,new hq(r,o.length,0),0,!0)).scrollIntoView())}return!0}}return!1}function FY(e){return function(t,n){let r=t.selection,i=e<0?r.$from:r.$to,a=i.depth;for(;i.node(a).isInline;){if(!a)return!1;a--}return i.node(a).isTextblock?(n&&n(t.tr.setSelection(eY.create(t.doc,e<0?i.start(a):i.end(a)))),!0):!1}}var IY=FY(-1),LY=FY(1);function yMe(e,t=null){return function(n,r){let{$from:i,$to:a}=n.selection,o=i.blockRange(a),s=o&&DJ(o,e,t);return s?(r&&r(n.tr.wrap(o,s).scrollIntoView()),!0):!1}}function RY(e,t=null){return function(n,r){let i=!1;for(let r=0;r<n.selection.ranges.length&&!i;r++){let{$from:{pos:a},$to:{pos:o}}=n.selection.ranges[r];n.doc.nodesBetween(a,o,(r,a)=>{if(i)return!1;if(!(!r.isTextblock||r.hasMarkup(e,t)))if(r.type==e)i=!0;else{let t=n.doc.resolve(a),r=t.index();i=t.parent.canReplaceWith(r,r+1,e)}})}if(!i)return!1;if(r){let i=n.tr;for(let r=0;r<n.selection.ranges.length;r++){let{$from:{pos:a},$to:{pos:o}}=n.selection.ranges[r];i.setBlockType(a,o,e,t)}r(i.scrollIntoView())}return!0}}function zY(...e){return function(t,n,r){for(let i=0;i<e.length;i++)if(e[i](t,n,r))return!0;return!1}}var BY=zY(vY,bY,CY),VY=zY(vY,EY,DY),HY={Enter:zY(kY,MY,NY,hMe),"Mod-Enter":jY,Backspace:BY,"Mod-Backspace":BY,"Shift-Backspace":BY,Delete:VY,"Mod-Delete":VY,"Mod-a":_Me},bMe={"Ctrl-h":HY.Backspace,"Alt-Backspace":HY[`Mod-Backspace`],"Ctrl-d":HY.Delete,"Ctrl-Alt-Backspace":HY[`Mod-Delete`],"Alt-Delete":HY[`Mod-Delete`],"Alt-d":HY[`Mod-Delete`],"Ctrl-a":IY,"Ctrl-e":LY};for(let e in HY)bMe[e]=HY[e];typeof navigator<`u`?/Mac|iP(hone|[oa]d)/.test(navigator.platform):typeof os<`u`&&os.platform&&os.platform();function xMe(e,t=null){return function(n,r){let{$from:i,$to:a}=n.selection,o=i.blockRange(a);if(!o)return!1;let s=r?n.tr:null;return SMe(s,o,e,t)?(r&&r(s.scrollIntoView()),!0):!1}}function SMe(e,t,n,r=null){let i=!1,a=t,o=t.$from.doc;if(t.depth>=2&&t.$from.node(t.depth-1).type.compatibleContent(n)&&t.startIndex==0){if(t.$from.index(t.depth-1)==0)return!1;let e=o.resolve(t.start-2);a=new Oq(e,e,t.depth),t.endIndex<t.parent.childCount&&(t=new Oq(t.$from,o.resolve(t.$to.end(t.depth)),t.depth)),i=!0}let s=DJ(a,n,r,t);return s?(e&&CMe(e,t,s,i,n),!0):!1}function CMe(e,t,n,r,i){let a=lq.empty;for(let e=n.length-1;e>=0;e--)a=lq.from(n[e].type.create(n[e].attrs,a));e.step(new CJ(t.start-(r?2:0),t.end,t.start,t.end,new hq(a,0,0),n.length,!0));let o=0;for(let e=0;e<n.length;e++)n[e].type==i&&(o=e+1);let s=n.length-o,c=t.start+n.length-(r?2:0),l=t.parent;for(let n=t.startIndex,r=t.endIndex,i=!0;n<r;n++,i=!1)!i&&jJ(e.doc,c,s)&&(e.split(c,s),c+=2*s),c+=l.child(n).nodeSize;return e}function wMe(e){return function(t,n){let{$from:r,$to:i}=t.selection,a=r.blockRange(i,t=>t.childCount>0&&t.firstChild.type==e);return a?n?r.node(a.depth-1).type==e?TMe(t,n,e,a):EMe(t,n,a):!0:!1}}function TMe(e,t,n,r){let i=e.tr,a=r.end,o=r.$to.end(r.depth);a<o&&(i.step(new CJ(a-1,o,a,o,new hq(lq.from(n.create(null,r.parent.copy())),1,0),1,!0)),r=new Oq(i.doc.resolve(r.$from.pos),i.doc.resolve(o),r.depth));let s=EJ(r);if(s==null)return!1;i.lift(r,s);let c=i.doc.resolve(i.mapping.map(a,-1)-1);return MJ(i.doc,c.pos)&&c.nodeBefore.type==c.nodeAfter.type&&i.join(c.pos),t(i.scrollIntoView()),!0}function EMe(e,t,n){let r=e.tr,i=n.parent;for(let e=n.end,t=n.endIndex-1,a=n.startIndex;t>a;t--)e-=i.child(t).nodeSize,r.delete(e-1,e+1);let a=r.doc.resolve(n.start),o=a.nodeAfter;if(r.mapping.map(n.end)!=n.start+a.nodeAfter.nodeSize)return!1;let s=n.startIndex==0,c=n.endIndex==i.childCount,l=a.node(-1),u=a.index(-1);if(!l.canReplace(u+ +!s,u+1,o.content.append(c?lq.empty:lq.from(i))))return!1;let d=a.pos,f=d+o.nodeSize;return r.step(new CJ(d-+!!s,f+ +!!c,d+1,f-1,new hq((s?lq.empty:lq.from(i.copy(lq.empty))).append(c?lq.empty:lq.from(i.copy(lq.empty))),+!s,+!c),+!s)),t(r.scrollIntoView()),!0}function DMe(e){return function(t,n){let{$from:r,$to:i}=t.selection,a=r.blockRange(i,t=>t.childCount>0&&t.firstChild.type==e);if(!a)return!1;let o=a.startIndex;if(o==0)return!1;let s=a.parent,c=s.child(o-1);if(c.type!=e)return!1;if(n){let r=c.lastChild&&c.lastChild.type==s.type,i=lq.from(r?e.create():null),o=new hq(lq.from(e.create(null,lq.from(s.type.create(null,i)))),r?3:1,0),l=a.start,u=a.end;n(t.tr.step(new CJ(l-(r?3:1),u,l,u,o,1,!0)).scrollIntoView())}return!0}}var UY=function(e){for(var t=0;;t++)if(e=e.previousSibling,!e)return t},WY=function(e){let t=e.assignedSlot||e.parentNode;return t&&t.nodeType==11?t.host:t},GY=null,KY=function(e,t,n){let r=GY||=document.createRange();return r.setEnd(e,n??e.nodeValue.length),r.setStart(e,t||0),r},OMe=function(){GY=null},qY=function(e,t,n,r){return n&&(JY(e,t,n,r,-1)||JY(e,t,n,r,1))},kMe=/^(img|br|input|textarea|hr)$/i;function JY(e,t,n,r,i){for(;;){if(e==n&&t==r)return!0;if(t==(i<0?0:YY(e))){let n=e.parentNode;if(!n||n.nodeType!=1||XY(e)||kMe.test(e.nodeName)||e.contentEditable==`false`)return!1;t=UY(e)+(i<0?0:1),e=n}else if(e.nodeType==1){let n=e.childNodes[t+(i<0?-1:0)];if(n.nodeType==1&&n.contentEditable==`false`)if(n.pmViewDesc?.ignoreForSelection)t+=i;else return!1;else e=n,t=i<0?YY(e):0}else return!1}}function YY(e){return e.nodeType==3?e.nodeValue.length:e.childNodes.length}function AMe(e,t){for(;;){if(e.nodeType==3&&t)return e;if(e.nodeType==1&&t>0){if(e.contentEditable==`false`)return null;e=e.childNodes[t-1],t=YY(e)}else if(e.parentNode&&!XY(e))t=UY(e),e=e.parentNode;else return null}}function jMe(e,t){for(;;){if(e.nodeType==3&&t<e.nodeValue.length)return e;if(e.nodeType==1&&t<e.childNodes.length){if(e.contentEditable==`false`)return null;e=e.childNodes[t],t=0}else if(e.parentNode&&!XY(e))t=UY(e)+1,e=e.parentNode;else return null}}function MMe(e,t,n){for(let r=t==0,i=t==YY(e);r||i;){if(e==n)return!0;let t=UY(e);if(e=e.parentNode,!e)return!1;r&&=t==0,i&&=t==YY(e)}}function XY(e){let t;for(let n=e;n&&!(t=n.pmViewDesc);n=n.parentNode);return t&&t.node&&t.node.isBlock&&(t.dom==e||t.contentDOM==e)}var ZY=function(e){return e.focusNode&&qY(e.focusNode,e.focusOffset,e.anchorNode,e.anchorOffset)};function QY(e,t){let n=document.createEvent(`Event`);return n.initEvent(`keydown`,!0,!0),n.keyCode=e,n.key=n.code=t,n}function NMe(e){let t=e.activeElement;for(;t&&t.shadowRoot;)t=t.shadowRoot.activeElement;return t}function PMe(e,t,n){if(e.caretPositionFromPoint)try{let r=e.caretPositionFromPoint(t,n);if(r)return{node:r.offsetNode,offset:Math.min(YY(r.offsetNode),r.offset)}}catch{}if(e.caretRangeFromPoint){let r=e.caretRangeFromPoint(t,n);if(r)return{node:r.startContainer,offset:Math.min(YY(r.startContainer),r.startOffset)}}}var $Y=typeof navigator<`u`?navigator:null,eX=typeof document<`u`?document:null,tX=$Y&&$Y.userAgent||``,nX=/Edge\/(\d+)/.exec(tX),rX=/MSIE \d/.exec(tX),iX=/Trident\/(?:[7-9]|\d{2,})\..*rv:(\d+)/.exec(tX),aX=!!(rX||iX||nX),oX=rX?document.documentMode:iX?+iX[1]:nX?+nX[1]:0,sX=!aX&&/gecko\/(\d+)/i.test(tX);sX&&+(/Firefox\/(\d+)/.exec(tX)||[0,0])[1];var cX=!aX&&/Chrome\/(\d+)/.exec(tX),lX=!!cX,uX=cX?+cX[1]:0,dX=!aX&&!!$Y&&/Apple Computer/.test($Y.vendor),fX=dX&&(/Mobile\/\w+/.test(tX)||!!$Y&&$Y.maxTouchPoints>2),pX=fX||($Y?/Mac/.test($Y.platform):!1),mX=$Y?/Win/.test($Y.platform):!1,hX=/Android \d/.test(tX),gX=!!eX&&`webkitFontSmoothing`in eX.documentElement.style,FMe=gX?+(/\bAppleWebKit\/(\d+)/.exec(navigator.userAgent)||[0,0])[1]:0;function IMe(e){let t=e.defaultView&&e.defaultView.visualViewport;return t?{left:0,right:t.width,top:0,bottom:t.height}:{left:0,right:e.documentElement.clientWidth,top:0,bottom:e.documentElement.clientHeight}}function _X(e,t){return typeof e==`number`?e:e[t]}function LMe(e){let t=e.getBoundingClientRect(),n=t.width/e.offsetWidth||1,r=t.height/e.offsetHeight||1;return{left:t.left,right:t.left+e.clientWidth*n,top:t.top,bottom:t.top+e.clientHeight*r}}function vX(e,t,n){if(!TX(t)&&t.left==0)return;let r=e.someProp(`scrollThreshold`)||0,i=e.someProp(`scrollMargin`)||5,a=e.dom.ownerDocument;for(let o=n||e.dom;o;){if(o.nodeType!=1){o=WY(o);continue}let e=o,n=e==a.body,s=n?IMe(a):LMe(e),c=0,l=0;if(t.top<s.top+_X(r,`top`)?l=-(s.top-t.top+_X(i,`top`)):t.bottom>s.bottom-_X(r,`bottom`)&&(l=t.bottom-t.top>s.bottom-s.top?t.top+_X(i,`top`)-s.top:t.bottom-s.bottom+_X(i,`bottom`)),t.left<s.left+_X(r,`left`)?c=-(s.left-t.left+_X(i,`left`)):t.right>s.right-_X(r,`right`)&&(c=t.right-s.right+_X(i,`right`)),c||l)if(n)a.defaultView.scrollBy(c,l);else{let n=e.scrollLeft,r=e.scrollTop;l&&(e.scrollTop+=l),c&&(e.scrollLeft+=c);let i=e.scrollLeft-n,a=e.scrollTop-r;t={left:t.left-i,top:t.top-a,right:t.right-i,bottom:t.bottom-a}}let u=n?`fixed`:getComputedStyle(o).position;if(/^(fixed|sticky)$/.test(u))break;o=u==`absolute`?o.offsetParent:WY(o)}}function RMe(e){let t=e.dom.getBoundingClientRect(),n=Math.max(0,t.top),r,i;for(let a=(t.left+t.right)/2,o=n+1;o<Math.min(innerHeight,t.bottom);o+=5){let t=e.root.elementFromPoint(a,o);if(!t||t==e.dom||!e.dom.contains(t))continue;let s=t.getBoundingClientRect();if(s.top>=n-20){r=t,i=s.top;break}}return{refDOM:r,refTop:i,stack:yX(e.dom)}}function yX(e){let t=[],n=e.ownerDocument;for(let r=e;r&&(t.push({dom:r,top:r.scrollTop,left:r.scrollLeft}),e!=n);r=WY(r));return t}function zMe({refDOM:e,refTop:t,stack:n}){let r=e?e.getBoundingClientRect().top:0;bX(n,r==0?0:r-t)}function bX(e,t){for(let n=0;n<e.length;n++){let{dom:r,top:i,left:a}=e[n];r.scrollTop!=i+t&&(r.scrollTop=i+t),r.scrollLeft!=a&&(r.scrollLeft=a)}}var xX=null;function BMe(e){if(e.setActive)return e.setActive();if(xX)return e.focus(xX);let t=yX(e);e.focus(xX==null?{get preventScroll(){return xX={preventScroll:!0},!0}}:void 0),xX||(xX=!1,bX(t,0))}function SX(e,t){let n,r=2e8,i,a=0,o=t.top,s=t.top,c,l;for(let u=e.firstChild,d=0;u;u=u.nextSibling,d++){let e;if(u.nodeType==1)e=u.getClientRects();else if(u.nodeType==3)e=KY(u).getClientRects();else continue;for(let f=0;f<e.length;f++){let p=e[f];if(p.top<=o&&p.bottom>=s){o=Math.max(p.bottom,o),s=Math.min(p.top,s);let e=p.left>t.left?p.left-t.left:p.right<t.left?t.left-p.right:0;if(e<r){n=u,r=e,i=e&&n.nodeType==3?{left:p.right<t.left?p.right:p.left,top:t.top}:t,u.nodeType==1&&e&&(a=d+ +(t.left>=(p.left+p.right)/2));continue}}else p.top>t.top&&!c&&p.left<=t.left&&p.right>=t.left&&(c=u,l={left:Math.max(p.left,Math.min(p.right,t.left)),top:p.top});!n&&(t.left>=p.right&&t.top>=p.top||t.left>=p.left&&t.top>=p.bottom)&&(a=d+1)}}return!n&&c&&(n=c,i=l,r=0),n&&n.nodeType==3?VMe(n,i):!n||r&&n.nodeType==1?{node:e,offset:a}:SX(n,i)}function VMe(e,t){let n=e.nodeValue.length,r=document.createRange(),i;for(let a=0;a<n;a++){r.setEnd(e,a+1),r.setStart(e,a);let n=EX(r,1);if(n.top!=n.bottom&&CX(t,n)){i={node:e,offset:a+ +(t.left>=(n.left+n.right)/2)};break}}return r.detach(),i||{node:e,offset:0}}function CX(e,t){return e.left>=t.left-1&&e.left<=t.right+1&&e.top>=t.top-1&&e.top<=t.bottom+1}function HMe(e,t){let n=e.parentNode;return n&&/^li$/i.test(n.nodeName)&&t.left<e.getBoundingClientRect().left?n:e}function UMe(e,t,n){let{node:r,offset:i}=SX(t,n),a=-1;if(r.nodeType==1&&!r.firstChild){let e=r.getBoundingClientRect();a=e.left!=e.right&&n.left>(e.left+e.right)/2?1:-1}return e.docView.posFromDOM(r,i,a)}function WMe(e,t,n,r){let i=-1;for(let n=t,a=!1;n!=e.dom;){let t=e.docView.nearestDesc(n,!0),o;if(!t)return null;if(t.dom.nodeType==1&&(t.node.isBlock&&t.parent||!t.contentDOM)&&((o=t.dom.getBoundingClientRect()).width||o.height)&&(t.node.isBlock&&t.parent&&!/^T(R|BODY|HEAD|FOOT)$/.test(t.dom.nodeName)&&(!a&&o.left>r.left||o.top>r.top?i=t.posBefore:(!a&&o.right<r.left||o.bottom<r.top)&&(i=t.posAfter),a=!0),!t.contentDOM&&i<0&&!t.node.isText))return(t.node.isBlock?r.top<(o.top+o.bottom)/2:r.left<(o.left+o.right)/2)?t.posBefore:t.posAfter;n=t.dom.parentNode}return i>-1?i:e.docView.posFromDOM(t,n,-1)}function wX(e,t,n){let r=e.childNodes.length;if(r&&n.top<n.bottom)for(let i=Math.max(0,Math.min(r-1,Math.floor(r*(t.top-n.top)/(n.bottom-n.top))-2)),a=i;;){let n=e.childNodes[a];if(n.nodeType==1){let e=n.getClientRects();for(let r=0;r<e.length;r++){let i=e[r];if(CX(t,i))return wX(n,t,i)}}if((a=(a+1)%r)==i)break}return e}function GMe(e,t){let n=e.dom.ownerDocument,r,i=0,a=PMe(n,t.left,t.top);a&&({node:r,offset:i}=a);let o=(e.root.elementFromPoint?e.root:n).elementFromPoint(t.left,t.top),s;if(!o||!e.dom.contains(o.nodeType==1?o:o.parentNode)){let n=e.dom.getBoundingClientRect();if(!CX(t,n)||(o=wX(e.dom,t,n),!o))return null}if(dX)for(let e=o;r&&e;e=WY(e))e.draggable&&(r=void 0);if(o=HMe(o,t),r){if(sX&&r.nodeType==1&&(i=Math.min(i,r.childNodes.length),i<r.childNodes.length)){let e=r.childNodes[i],n;e.nodeName==`IMG`&&(n=e.getBoundingClientRect()).right<=t.left&&n.bottom>t.top&&i++}let n;gX&&i&&r.nodeType==1&&(n=r.childNodes[i-1]).nodeType==1&&n.contentEditable==`false`&&n.getBoundingClientRect().top>=t.top&&i--,r==e.dom&&i==r.childNodes.length-1&&r.lastChild.nodeType==1&&t.top>r.lastChild.getBoundingClientRect().bottom?s=e.state.doc.content.size:(i==0||r.nodeType!=1||r.childNodes[i-1].nodeName!=`BR`)&&(s=WMe(e,r,i,t))}s??=UMe(e,o,t);let c=e.docView.nearestDesc(o,!0);return{pos:s,inside:c?c.posAtStart-c.border:-1}}function TX(e){return e.top<e.bottom||e.left<e.right}function EX(e,t){let n=e.getClientRects();if(n.length){let e=n[t<0?0:n.length-1];if(TX(e))return e}return Array.prototype.find.call(n,TX)||e.getBoundingClientRect()}var KMe=/[\u0590-\u05f4\u0600-\u06ff\u0700-\u08ac]/;function DX(e,t,n){let{node:r,offset:i,atom:a}=e.docView.domFromPos(t,n<0?-1:1),o=gX||sX;if(r.nodeType==3)if(o&&(KMe.test(r.nodeValue)||(n<0?!i:i==r.nodeValue.length))){let e=EX(KY(r,i,i),n);if(sX&&i&&/\s/.test(r.nodeValue[i-1])&&i<r.nodeValue.length){let t=EX(KY(r,i-1,i-1),-1);if(t.top==e.top){let n=EX(KY(r,i,i+1),-1);if(n.top!=e.top)return OX(n,n.left<t.left)}}return e}else{let e=i,t=i,a=n<0?1:-1;return n<0&&!i?(t++,a=-1):n>=0&&i==r.nodeValue.length?(e--,a=1):n<0?e--:t++,OX(EX(KY(r,e,t),a),a<0)}if(!e.state.doc.resolve(t-(a||0)).parent.inlineContent){if(a==null&&i&&(n<0||i==YY(r))){let e=r.childNodes[i-1];if(e.nodeType==1)return kX(e.getBoundingClientRect(),!1)}if(a==null&&i<YY(r)){let e=r.childNodes[i];if(e.nodeType==1)return kX(e.getBoundingClientRect(),!0)}return kX(r.getBoundingClientRect(),n>=0)}if(a==null&&i&&(n<0||i==YY(r))){let e=r.childNodes[i-1],t=e.nodeType==3?KY(e,YY(e)-+!o):e.nodeType==1&&(e.nodeName!=`BR`||!e.nextSibling)?e:null;if(t)return OX(EX(t,1),!1)}if(a==null&&i<YY(r)){let e=r.childNodes[i];for(;e.pmViewDesc&&e.pmViewDesc.ignoreForCoords;)e=e.nextSibling;let t=e?e.nodeType==3?KY(e,0,+!o):e.nodeType==1?e:null:null;if(t)return OX(EX(t,-1),!0)}return OX(EX(r.nodeType==3?KY(r):r,-n),n>=0)}function OX(e,t){if(e.width==0)return e;let n=t?e.left:e.right;return{top:e.top,bottom:e.bottom,left:n,right:n}}function kX(e,t){if(e.height==0)return e;let n=t?e.top:e.bottom;return{top:n,bottom:n,left:e.left,right:e.right}}function AX(e,t,n){let r=e.state,i=e.root.activeElement;r!=t&&e.updateState(t),i!=e.dom&&e.focus();try{return n()}finally{r!=t&&e.updateState(r),i!=e.dom&&i&&i.focus()}}function qMe(e,t,n){let r=t.selection,i=n==`up`?r.$from:r.$to;return AX(e,t,()=>{let{node:t}=e.docView.domFromPos(i.pos,n==`up`?-1:1);for(;;){let n=e.docView.nearestDesc(t,!0);if(!n)break;if(n.node.isBlock){t=n.contentDOM||n.dom;break}t=n.dom.parentNode}let r=DX(e,i.pos,1);for(let e=t.firstChild;e;e=e.nextSibling){let t;if(e.nodeType==1)t=e.getClientRects();else if(e.nodeType==3)t=KY(e,0,e.nodeValue.length).getClientRects();else continue;for(let e=0;e<t.length;e++){let i=t[e];if(i.bottom>i.top+1&&(n==`up`?r.top-i.top>(i.bottom-r.top)*2:i.bottom-r.bottom>(r.bottom-i.top)*2))return!1}}return!0})}var JMe=/[\u0590-\u08ac]/;function YMe(e,t,n){let{$head:r}=t.selection;if(!r.parent.isTextblock)return!1;let i=r.parentOffset,a=!i,o=i==r.parent.content.size,s=e.domSelection();return s?!JMe.test(r.parent.textContent)||!s.modify?n==`left`||n==`backward`?a:o:AX(e,t,()=>{let{focusNode:t,focusOffset:i,anchorNode:a,anchorOffset:o}=e.domSelectionRange(),c=s.caretBidiLevel;s.modify(`move`,n,`character`);let l=r.depth?e.docView.domAfterPos(r.before()):e.dom,{focusNode:u,focusOffset:d}=e.domSelectionRange(),f=u&&!l.contains(u.nodeType==1?u:u.parentNode)||t==u&&i==d;try{s.collapse(a,o),t&&(t!=a||i!=o)&&s.extend&&s.extend(t,i)}catch{}return c!=null&&(s.caretBidiLevel=c),f}):r.pos==r.start()||r.pos==r.end()}var jX=null,MX=null,NX=!1;function XMe(e,t,n){return jX==t&&MX==n?NX:(jX=t,MX=n,NX=n==`up`||n==`down`?qMe(e,t,n):YMe(e,t,n))}var PX=0,FX=1,IX=2,LX=3,RX=class{constructor(e,t,n,r){this.parent=e,this.children=t,this.dom=n,this.contentDOM=r,this.dirty=PX,n.pmViewDesc=this}matchesWidget(e){return!1}matchesMark(e){return!1}matchesNode(e,t,n){return!1}matchesHack(e){return!1}parseRule(e){return null}stopEvent(e){return!1}get size(){let e=0;for(let t=0;t<this.children.length;t++)e+=this.children[t].size;return e}get border(){return 0}destroy(){this.parent=void 0,this.dom.pmViewDesc==this&&(this.dom.pmViewDesc=void 0);for(let e=0;e<this.children.length;e++)this.children[e].destroy()}posBeforeChild(e){for(let t=0,n=this.posAtStart;;t++){let r=this.children[t];if(r==e)return n;n+=r.size}}get posBefore(){return this.parent.posBeforeChild(this)}get posAtStart(){return this.parent?this.parent.posBeforeChild(this)+this.border:0}get posAfter(){return this.posBefore+this.size}get posAtEnd(){return this.posAtStart+this.size-2*this.border}localPosFromDOM(e,t,n){if(this.contentDOM&&this.contentDOM.contains(e.nodeType==1?e:e.parentNode))if(n<0){let n,r;if(e==this.contentDOM)n=e.childNodes[t-1];else{for(;e.parentNode!=this.contentDOM;)e=e.parentNode;n=e.previousSibling}for(;n&&!((r=n.pmViewDesc)&&r.parent==this);)n=n.previousSibling;return n?this.posBeforeChild(r)+r.size:this.posAtStart}else{let n,r;if(e==this.contentDOM)n=e.childNodes[t];else{for(;e.parentNode!=this.contentDOM;)e=e.parentNode;n=e.nextSibling}for(;n&&!((r=n.pmViewDesc)&&r.parent==this);)n=n.nextSibling;return n?this.posBeforeChild(r):this.posAtEnd}let r;if(e==this.dom&&this.contentDOM)r=t>UY(this.contentDOM);else if(this.contentDOM&&this.contentDOM!=this.dom&&this.dom.contains(this.contentDOM))r=e.compareDocumentPosition(this.contentDOM)&2;else if(this.dom.firstChild){if(t==0)for(let t=e;;t=t.parentNode){if(t==this.dom){r=!1;break}if(t.previousSibling)break}if(r==null&&t==e.childNodes.length)for(let t=e;;t=t.parentNode){if(t==this.dom){r=!0;break}if(t.nextSibling)break}}return r??n>0?this.posAtEnd:this.posAtStart}nearestDesc(e,t=!1){for(let n=!0,r=e;r;r=r.parentNode){let i=this.getDesc(r),a;if(i&&(!t||i.node))if(n&&(a=i.nodeDOM)&&!(a.nodeType==1?a.contains(e.nodeType==1?e:e.parentNode):a==e))n=!1;else return i}}getDesc(e){let t=e.pmViewDesc;for(let e=t;e;e=e.parent)if(e==this)return t}posFromDOM(e,t,n){for(let r=e;r;r=r.parentNode){let i=this.getDesc(r);if(i)return i.localPosFromDOM(e,t,n)}return-1}descAt(e){for(let t=0,n=0;t<this.children.length;t++){let r=this.children[t],i=n+r.size;if(n==e&&i!=n){for(;!r.border&&r.children.length;)for(let e=0;e<r.children.length;e++){let t=r.children[e];if(t.size){r=t;break}}return r}if(e<i)return r.descAt(e-n-r.border);n=i}}domFromPos(e,t){if(!this.contentDOM)return{node:this.dom,offset:0,atom:e+1};let n=0,r=0;for(let t=0;n<this.children.length;n++){let i=this.children[n],a=t+i.size;if(a>e||i instanceof WX){r=e-t;break}t=a}if(r)return this.children[n].domFromPos(r-this.children[n].border,t);for(let e;n&&!(e=this.children[n-1]).size&&e instanceof zX&&e.side>=0;n--);if(t<=0){let e,r=!0;for(;e=n?this.children[n-1]:null,!(!e||e.dom.parentNode==this.contentDOM);n--,r=!1);return e&&t&&r&&!e.border&&!e.domAtom?e.domFromPos(e.size,t):{node:this.contentDOM,offset:e?UY(e.dom)+1:0}}else{let e,r=!0;for(;e=n<this.children.length?this.children[n]:null,!(!e||e.dom.parentNode==this.contentDOM);n++,r=!1);return e&&r&&!e.border&&!e.domAtom?e.domFromPos(0,t):{node:this.contentDOM,offset:e?UY(e.dom):this.contentDOM.childNodes.length}}}parseRange(e,t,n=0){if(this.children.length==0)return{node:this.contentDOM,from:e,to:t,fromOffset:0,toOffset:this.contentDOM.childNodes.length};let r=-1,i=-1;for(let a=n,o=0;;o++){let n=this.children[o],s=a+n.size;if(r==-1&&e<=s){let i=a+n.border;if(e>=i&&t<=s-n.border&&n.node&&n.contentDOM&&this.contentDOM.contains(n.contentDOM))return n.parseRange(e,t,i);e=a;for(let t=o;t>0;t--){let n=this.children[t-1];if(n.size&&n.dom.parentNode==this.contentDOM&&!n.emptyChildAt(1)){r=UY(n.dom)+1;break}e-=n.size}r==-1&&(r=0)}if(r>-1&&(s>t||o==this.children.length-1)){t=s;for(let e=o+1;e<this.children.length;e++){let n=this.children[e];if(n.size&&n.dom.parentNode==this.contentDOM&&!n.emptyChildAt(-1)){i=UY(n.dom);break}t+=n.size}i==-1&&(i=this.contentDOM.childNodes.length);break}a=s}return{node:this.contentDOM,from:e,to:t,fromOffset:r,toOffset:i}}emptyChildAt(e){if(this.border||!this.contentDOM||!this.children.length)return!1;let t=this.children[e<0?0:this.children.length-1];return t.size==0||t.emptyChildAt(e)}domAfterPos(e){let{node:t,offset:n}=this.domFromPos(e,0);if(t.nodeType!=1||n==t.childNodes.length)throw RangeError(`No node after pos `+e);return t.childNodes[n]}setSelection(e,t,n,r=!1){let i=Math.min(e,t),a=Math.max(e,t);for(let o=0,s=0;o<this.children.length;o++){let c=this.children[o],l=s+c.size;if(i>s&&a<l)return c.setSelection(e-s-c.border,t-s-c.border,n,r);s=l}let o=this.domFromPos(e,e?-1:1),s=t==e?o:this.domFromPos(t,t?-1:1),c=n.root.getSelection(),l=n.domSelectionRange(),u=!1;if((sX||dX)&&e==t){let{node:e,offset:t}=o;if(e.nodeType==3){if(u=!!(t&&e.nodeValue[t-1]==`
+`),u&&t==e.nodeValue.length)for(let t=e,n;t;t=t.parentNode){if(n=t.nextSibling){n.nodeName==`BR`&&(o=s={node:n.parentNode,offset:UY(n)+1});break}let e=t.pmViewDesc;if(e&&e.node&&e.node.isBlock)break}}else{let n=e.childNodes[t-1];u=n&&(n.nodeName==`BR`||n.contentEditable==`false`)}}if(sX&&l.focusNode&&l.focusNode!=s.node&&l.focusNode.nodeType==1){let e=l.focusNode.childNodes[l.focusOffset];e&&e.contentEditable==`false`&&(r=!0)}if(!(r||u&&dX)&&qY(o.node,o.offset,l.anchorNode,l.anchorOffset)&&qY(s.node,s.offset,l.focusNode,l.focusOffset))return;let d=!1;if((c.extend||e==t)&&!(u&&sX)){c.collapse(o.node,o.offset);try{e!=t&&c.extend(s.node,s.offset),d=!0}catch{}}if(!d){if(e>t){let e=o;o=s,s=e}let n=document.createRange();n.setEnd(s.node,s.offset),n.setStart(o.node,o.offset),c.removeAllRanges(),c.addRange(n)}}ignoreMutation(e){return!this.contentDOM&&e.type!=`selection`}get contentLost(){return this.contentDOM&&this.contentDOM!=this.dom&&!this.dom.contains(this.contentDOM)}markDirty(e,t){for(let n=0,r=0;r<this.children.length;r++){let i=this.children[r],a=n+i.size;if(n==a?e<=a&&t>=n:e<a&&t>n){let r=n+i.border,o=a-i.border;if(e>=r&&t<=o){this.dirty=e==n||t==a?IX:FX,e==r&&t==o&&(i.contentLost||i.dom.parentNode!=this.contentDOM)?i.dirty=LX:i.markDirty(e-r,t-r);return}else i.dirty=i.dom==i.contentDOM&&i.dom.parentNode==this.contentDOM&&!i.children.length?IX:LX}n=a}this.dirty=IX}markParentsDirty(){let e=1;for(let t=this.parent;t;t=t.parent,e++){let n=e==1?IX:FX;t.dirty<n&&(t.dirty=n)}}get domAtom(){return!1}get ignoreForCoords(){return!1}get ignoreForSelection(){return!1}isText(e){return!1}},zX=class extends RX{constructor(e,t,n,r){let i,a=t.type.toDOM;if(typeof a==`function`&&(a=a(n,()=>{if(!i)return r;if(i.parent)return i.parent.posBeforeChild(i)})),!t.type.spec.raw){if(a.nodeType!=1){let e=document.createElement(`span`);e.appendChild(a),a=e}a.hasAttribute(`contenteditable`)||(a.contentEditable=`false`),a.classList.add(`ProseMirror-widget`)}super(e,[],a,null),this.widget=t,this.widget=t,i=this}matchesWidget(e){return this.dirty==PX&&e.type.eq(this.widget.type)}parseRule(){return{ignore:!0}}stopEvent(e){let t=this.widget.spec.stopEvent;return t?t(e):!1}ignoreMutation(e){return e.type!=`selection`||this.widget.spec.ignoreSelection}destroy(){this.widget.type.destroy(this.dom),super.destroy()}get domAtom(){return!0}get ignoreForSelection(){return!!this.widget.type.spec.relaxedSide}get side(){return this.widget.type.side}},ZMe=class extends RX{constructor(e,t,n,r){super(e,[],t,null),this.textDOM=n,this.text=r}get size(){return this.text.length}localPosFromDOM(e,t){return e==this.textDOM?this.posAtStart+t:this.posAtStart+(t?this.size:0)}domFromPos(e){return{node:this.textDOM,offset:e}}ignoreMutation(e){return e.type===`characterData`&&e.target.nodeValue==e.oldValue}},BX=class e extends RX{constructor(e,t,n,r,i){super(e,[],n,r),this.mark=t,this.spec=i}static create(t,n,r,i){let a=i.nodeViews[n.type.name],o=a&&a(n,i,r);return(!o||!o.dom)&&(o=tJ.renderSpec(document,n.type.spec.toDOM(n,r),null,n.attrs)),new e(t,n,o.dom,o.contentDOM||o.dom,o)}parseRule(){return this.dirty&LX||this.mark.type.spec.reparseInView?null:{mark:this.mark.type.name,attrs:this.mark.attrs,contentElement:this.contentDOM}}matchesMark(e){return this.dirty!=LX&&this.mark.eq(e)}markDirty(e,t){if(super.markDirty(e,t),this.dirty!=PX){let e=this.parent;for(;!e.node;)e=e.parent;e.dirty<this.dirty&&(e.dirty=this.dirty),this.dirty=PX}}slice(t,n,r){let i=e.create(this.parent,this.mark,!0,r),a=this.children,o=this.size;n<o&&(a=QX(a,n,o,r)),t>0&&(a=QX(a,0,t,r));for(let e=0;e<a.length;e++)a[e].parent=i;return i.children=a,i}ignoreMutation(e){return this.spec.ignoreMutation?this.spec.ignoreMutation(e):super.ignoreMutation(e)}destroy(){this.spec.destroy&&this.spec.destroy(),super.destroy()}},VX=class e extends RX{constructor(e,t,n,r,i,a,o){super(e,[],i,a),this.node=t,this.outerDeco=n,this.innerDeco=r,this.nodeDOM=o}static create(t,n,r,i,a,o){let s=a.nodeViews[n.type.name],c,l=s&&s(n,a,()=>{if(!c)return o;if(c.parent)return c.parent.posBeforeChild(c)},r,i),u=l&&l.dom,d=l&&l.contentDOM;if(n.isText){if(!u)u=document.createTextNode(n.text);else if(u.nodeType!=3)throw RangeError(`Text must be rendered as a DOM text node`)}else if(!u){let e=tJ.renderSpec(document,n.type.spec.toDOM(n),null,n.attrs);({dom:u,contentDOM:d}=e)}!d&&!n.isText&&u.nodeName!=`BR`&&(u.hasAttribute(`contenteditable`)||(u.contentEditable=`false`),n.type.spec.draggable&&(u.draggable=!0));let f=u;return u=YX(u,r,n),l?c=new QMe(t,n,r,i,u,d||null,f,l):n.isText?new UX(t,n,r,i,u,f):new e(t,n,r,i,u,d||null,f)}parseRule(e){if(this.node.type.spec.reparseInView)return null;let t={node:this.node.type.name,attrs:this.node.attrs};if(this.node.type.whitespace==`pre`&&(t.preserveWhitespace=`full`),!this.contentDOM)t.getContent=()=>this.node.content;else if(!this.contentLost)t.contentElement=this.contentDOM;else{for(let e=this.children.length-1;e>=0;e--){let n=this.children[e];if(this.dom.contains(n.dom.parentNode)){t.contentElement=n.dom.parentNode;break}}if(!t.contentElement){let n=e&&e.find(t=>t.nodeType==1&&e.indexOf(t.parentNode)<0&&this.dom.contains(t));n?t.contentElement=n:t.getContent=()=>lq.empty}}return t}matchesNode(e,t,n){return this.dirty==PX&&e.eq(this.node)&&XX(t,this.outerDeco)&&n.eq(this.innerDeco)}get size(){return this.node.nodeSize}get border(){return+!this.node.isLeaf}updateChildren(e,t){let n=this.node.inlineContent,r=t,i=e.composing?this.localCompositionInfo(e,t):null,a=i&&i.pos>-1?i:null,o=i&&i.pos<0,s=new tNe(this,a&&a.node,e);iNe(this.node,this.innerDeco,(t,i,a)=>{t.spec.marks?s.syncToMarks(t.spec.marks,n,e,i):t.type.side>=0&&!a&&s.syncToMarks(i==this.node.childCount?pq.none:this.node.child(i).marks,n,e,i),s.placeWidget(t,e,r)},(t,a,c,l)=>{s.syncToMarks(t.marks,n,e,l);let u;s.findNodeMatch(t,a,c,l)||o&&e.state.selection.from>r&&e.state.selection.to<r+t.nodeSize&&(u=s.findIndexWithChild(i.node))>-1&&s.updateNodeAt(t,a,c,u,e)||s.updateNextNode(t,a,c,e,l,r)||s.addNode(t,a,c,e,r),r+=t.nodeSize}),s.syncToMarks([],n,e,0),this.node.isTextblock&&s.addTextblockHacks(),s.destroyRest(),(s.changed||this.dirty==IX)&&(a&&this.protectLocalComposition(e,a),GX(this.contentDOM,this.children,e),fX&&aNe(this.dom))}localCompositionInfo(e,t){let{from:n,to:r}=e.state.selection;if(!(e.state.selection instanceof eY)||n<t||r>t+this.node.content.size)return null;let i=e.input.compositionNode;if(!i||!this.dom.contains(i.parentNode))return null;if(this.node.inlineContent){let e=i.nodeValue,a=oNe(this.node.content,e,n-t,r-t);return a<0?null:{node:i,pos:a,text:e}}else return{node:i,pos:-1,text:``}}protectLocalComposition(e,{node:t,pos:n,text:r}){if(this.getDesc(t))return;let i=t;for(;i.parentNode!=this.contentDOM;i=i.parentNode){for(;i.previousSibling;)i.parentNode.removeChild(i.previousSibling);for(;i.nextSibling;)i.parentNode.removeChild(i.nextSibling);i.pmViewDesc&&=void 0}let a=new ZMe(this,i,t,r);e.input.compositionNodes.push(a),this.children=QX(this.children,n,n+r.length,e,a)}update(e,t,n,r){return this.dirty==LX||!e.sameMarkup(this.node)?!1:(this.updateInner(e,t,n,r),!0)}updateInner(e,t,n,r){this.updateOuterDeco(t),this.node=e,this.innerDeco=n,this.contentDOM&&this.updateChildren(r,this.posAtStart),this.dirty=PX}updateOuterDeco(e){if(XX(e,this.outerDeco))return;let t=this.nodeDOM.nodeType!=1,n=this.dom;this.dom=$Me(this.dom,this.nodeDOM,JX(this.outerDeco,this.node,t),JX(e,this.node,t)),this.dom!=n&&(n.pmViewDesc=void 0,this.dom.pmViewDesc=this),this.outerDeco=e}selectNode(){this.nodeDOM.nodeType==1&&(this.nodeDOM.classList.add(`ProseMirror-selectednode`),(this.contentDOM||!this.node.type.spec.draggable)&&(this.nodeDOM.draggable=!0))}deselectNode(){this.nodeDOM.nodeType==1&&(this.nodeDOM.classList.remove(`ProseMirror-selectednode`),(this.contentDOM||!this.node.type.spec.draggable)&&this.nodeDOM.removeAttribute(`draggable`))}get domAtom(){return this.node.isAtom}};function HX(e,t,n,r,i){YX(r,t,e);let a=new VX(void 0,e,t,n,r,r,r);return a.contentDOM&&a.updateChildren(i,0),a}var UX=class e extends VX{constructor(e,t,n,r,i,a){super(e,t,n,r,i,null,a)}parseRule(){let e=this.nodeDOM.parentNode;for(;e&&e!=this.dom&&!e.pmIsDeco;)e=e.parentNode;return{skip:e||!0}}update(e,t,n,r){return this.dirty==LX||this.dirty!=PX&&!this.inParent()||!e.sameMarkup(this.node)?!1:(this.updateOuterDeco(t),(this.dirty!=PX||e.text!=this.node.text)&&e.text!=this.nodeDOM.nodeValue&&(this.nodeDOM.nodeValue=e.text,r.trackWrites==this.nodeDOM&&(r.trackWrites=null)),this.node=e,this.dirty=PX,!0)}inParent(){let e=this.parent.contentDOM;for(let t=this.nodeDOM;t;t=t.parentNode)if(t==e)return!0;return!1}domFromPos(e){return{node:this.nodeDOM,offset:e}}localPosFromDOM(e,t,n){return e==this.nodeDOM?this.posAtStart+Math.min(t,this.node.text.length):super.localPosFromDOM(e,t,n)}ignoreMutation(e){return e.type!=`characterData`&&e.type!=`selection`}slice(t,n,r){let i=this.node.cut(t,n),a=document.createTextNode(i.text);return new e(this.parent,i,this.outerDeco,this.innerDeco,a,a)}markDirty(e,t){super.markDirty(e,t),this.dom!=this.nodeDOM&&(e==0||t==this.nodeDOM.nodeValue.length)&&(this.dirty=LX)}get domAtom(){return!1}isText(e){return this.node.text==e}},WX=class extends RX{parseRule(){return{ignore:!0}}matchesHack(e){return this.dirty==PX&&this.dom.nodeName==e}get domAtom(){return!0}get ignoreForCoords(){return this.dom.nodeName==`IMG`}},QMe=class extends VX{constructor(e,t,n,r,i,a,o,s){super(e,t,n,r,i,a,o),this.spec=s}update(e,t,n,r){if(this.dirty==LX)return!1;if(this.spec.update&&(this.node.type==e.type||this.spec.multiType)){let i=this.spec.update(e,t,n);return i&&this.updateInner(e,t,n,r),i}else if(!this.contentDOM&&!e.isLeaf)return!1;else return super.update(e,t,n,r)}selectNode(){this.spec.selectNode?this.spec.selectNode():super.selectNode()}deselectNode(){this.spec.deselectNode?this.spec.deselectNode():super.deselectNode()}setSelection(e,t,n,r){this.spec.setSelection?this.spec.setSelection(e,t,n.root):super.setSelection(e,t,n,r)}destroy(){this.spec.destroy&&this.spec.destroy(),super.destroy()}stopEvent(e){return this.spec.stopEvent?this.spec.stopEvent(e):!1}ignoreMutation(e){return this.spec.ignoreMutation?this.spec.ignoreMutation(e):super.ignoreMutation(e)}};function GX(e,t,n){let r=e.firstChild,i=!1;for(let a=0;a<t.length;a++){let o=t[a],s=o.dom;if(s.parentNode==e){for(;s!=r;)r=ZX(r),i=!0;r=r.nextSibling}else i=!0,e.insertBefore(s,r);if(o instanceof BX){let t=r?r.previousSibling:e.lastChild;GX(o.contentDOM,o.children,n),r=t?t.nextSibling:e.firstChild}}for(;r;)r=ZX(r),i=!0;i&&n.trackWrites==e&&(n.trackWrites=null)}var KX=function(e){e&&(this.nodeName=e)};KX.prototype=Object.create(null);var qX=[new KX];function JX(e,t,n){if(e.length==0)return qX;let r=n?qX[0]:new KX,i=[r];for(let a=0;a<e.length;a++){let o=e[a].type.attrs;if(o){o.nodeName&&i.push(r=new KX(o.nodeName));for(let e in o){let a=o[e];a!=null&&(n&&i.length==1&&i.push(r=new KX(t.isInline?`span`:`div`)),e==`class`?r.class=(r.class?r.class+` `:``)+a:e==`style`?r.style=(r.style?r.style+`;`:``)+a:e!=`nodeName`&&(r[e]=a))}}}return i}function $Me(e,t,n,r){if(n==qX&&r==qX)return t;let i=t;for(let t=0;t<r.length;t++){let a=r[t],o=n[t];if(t){let t;o&&o.nodeName==a.nodeName&&i!=e&&(t=i.parentNode)&&t.nodeName.toLowerCase()==a.nodeName?i=t:(t=document.createElement(a.nodeName),t.pmIsDeco=!0,t.appendChild(i),o=qX[0],i=t)}eNe(i,o||qX[0],a)}return i}function eNe(e,t,n){for(let r in t)r!=`class`&&r!=`style`&&r!=`nodeName`&&!(r in n)&&e.removeAttribute(r);for(let r in n)r!=`class`&&r!=`style`&&r!=`nodeName`&&n[r]!=t[r]&&e.setAttribute(r,n[r]);if(t.class!=n.class){let r=t.class?t.class.split(` `).filter(Boolean):[],i=n.class?n.class.split(` `).filter(Boolean):[];for(let t=0;t<r.length;t++)i.indexOf(r[t])==-1&&e.classList.remove(r[t]);for(let t=0;t<i.length;t++)r.indexOf(i[t])==-1&&e.classList.add(i[t]);e.classList.length==0&&e.removeAttribute(`class`)}if(t.style!=n.style){if(t.style){let n=/\s*([\w\-\xa1-\uffff]+)\s*:(?:"(?:\\.|[^"])*"|'(?:\\.|[^'])*'|\(.*?\)|[^;])*/g,r;for(;r=n.exec(t.style);)e.style.removeProperty(r[1])}n.style&&(e.style.cssText+=n.style)}}function YX(e,t,n){return $Me(e,e,qX,JX(t,n,e.nodeType!=1))}function XX(e,t){if(e.length!=t.length)return!1;for(let n=0;n<e.length;n++)if(!e[n].type.eq(t[n].type))return!1;return!0}function ZX(e){let t=e.nextSibling;return e.parentNode.removeChild(e),t}var tNe=class{constructor(e,t,n){this.lock=t,this.view=n,this.index=0,this.stack=[],this.changed=!1,this.top=e,this.preMatch=nNe(e.node.content,e)}destroyBetween(e,t){if(e!=t){for(let n=e;n<t;n++)this.top.children[n].destroy();this.top.children.splice(e,t-e),this.changed=!0}}destroyRest(){this.destroyBetween(this.index,this.top.children.length)}syncToMarks(e,t,n,r){let i=0,a=this.stack.length>>1,o=Math.min(a,e.length);for(;i<o&&(i==a-1?this.top:this.stack[i+1<<1]).matchesMark(e[i])&&e[i].type.spec.spanning!==!1;)i++;for(;i<a;)this.destroyRest(),this.top.dirty=PX,this.index=this.stack.pop(),this.top=this.stack.pop(),a--;for(;a<e.length;){this.stack.push(this.top,this.index+1);let i=-1,o=this.top.children.length;r<this.preMatch.index&&(o=Math.min(this.index+3,o));for(let t=this.index;t<o;t++){let n=this.top.children[t];if(n.matchesMark(e[a])&&!this.isLocked(n.dom)){i=t;break}}if(i<0&&this.index<this.top.children.length){let t=this.top.children[this.index];t instanceof BX&&t.dirty!=LX&&t.mark.type==e[a].type&&t.spec.update&&!this.isLocked(t.dom)&&t.spec.update(e[a])&&(t.mark=e[a],i=this.index,this.changed=!0)}if(i>-1)i>this.index&&(this.changed=!0,this.destroyBetween(this.index,i)),this.top=this.top.children[this.index];else{let r=BX.create(this.top,e[a],t,n);this.top.children.splice(this.index,0,r),this.top=r,this.changed=!0}this.index=0,a++}}findNodeMatch(e,t,n,r){let i=-1,a;if(r>=this.preMatch.index&&(a=this.preMatch.matches[r-this.preMatch.index]).parent==this.top&&a.matchesNode(e,t,n))i=this.top.children.indexOf(a,this.index);else for(let r=this.index,a=Math.min(this.top.children.length,r+5);r<a;r++){let a=this.top.children[r];if(a.matchesNode(e,t,n)&&!this.preMatch.matched.has(a)){i=r;break}}return i<0?!1:(this.destroyBetween(this.index,i),this.index++,!0)}updateNodeAt(e,t,n,r,i){let a=this.top.children[r];return a.dirty==LX&&a.dom==a.contentDOM&&(a.dirty=IX),a.update(e,t,n,i)?(this.destroyBetween(this.index,r),this.index++,!0):!1}findIndexWithChild(e){for(;;){let t=e.parentNode;if(!t)return-1;if(t==this.top.contentDOM){let t=e.pmViewDesc;if(t){for(let e=this.index;e<this.top.children.length;e++)if(this.top.children[e]==t)return e}return-1}e=t}}updateNextNode(e,t,n,r,i,a){for(let o=this.index;o<this.top.children.length;o++){let s=this.top.children[o];if(s instanceof VX){let c=this.preMatch.matched.get(s);if(c!=null&&c!=i)return!1;let l=s.dom,u,d=this.isLocked(l)&&!(e.isText&&s.node&&s.node.isText&&s.nodeDOM.nodeValue==e.text&&s.dirty!=LX&&XX(t,s.outerDeco));if(!d&&s.update(e,t,n,r))return this.destroyBetween(this.index,o),s.dom!=l&&(this.changed=!0),this.index++,!0;if(!d&&(u=this.recreateWrapper(s,e,t,n,r,a)))return this.destroyBetween(this.index,o),this.top.children[this.index]=u,u.contentDOM&&(u.dirty=IX,u.updateChildren(r,a+1),u.dirty=PX),this.changed=!0,this.index++,!0;break}}return!1}recreateWrapper(e,t,n,r,i,a){if(e.dirty||t.isAtom||!e.children.length||!e.node.content.eq(t.content)||!XX(n,e.outerDeco)||!r.eq(e.innerDeco))return null;let o=VX.create(this.top,t,n,r,i,a);if(o.contentDOM){o.children=e.children,e.children=[];for(let e of o.children)e.parent=o}return e.destroy(),o}addNode(e,t,n,r,i){let a=VX.create(this.top,e,t,n,r,i);a.contentDOM&&a.updateChildren(r,i+1),this.top.children.splice(this.index++,0,a),this.changed=!0}placeWidget(e,t,n){let r=this.index<this.top.children.length?this.top.children[this.index]:null;if(r&&r.matchesWidget(e)&&(e==r.widget||!r.widget.type.toDOM.parentNode))this.index++;else{let r=new zX(this.top,e,t,n);this.top.children.splice(this.index++,0,r),this.changed=!0}}addTextblockHacks(){let e=this.top.children[this.index-1],t=this.top;for(;e instanceof BX;)t=e,e=t.children[t.children.length-1];(!e||!(e instanceof UX)||/\n$/.test(e.node.text)||this.view.requiresGeckoHackNode&&/\s$/.test(e.node.text))&&((dX||lX)&&e&&e.dom.contentEditable==`false`&&this.addHackNode(`IMG`,t),this.addHackNode(`BR`,this.top))}addHackNode(e,t){if(t==this.top&&this.index<t.children.length&&t.children[this.index].matchesHack(e))this.index++;else{let n=document.createElement(e);e==`IMG`&&(n.className=`ProseMirror-separator`,n.alt=``),e==`BR`&&(n.className=`ProseMirror-trailingBreak`);let r=new WX(this.top,[],n,null);t==this.top?t.children.splice(this.index++,0,r):t.children.push(r),this.changed=!0}}isLocked(e){return this.lock&&(e==this.lock||e.nodeType==1&&e.contains(this.lock.parentNode))}};function nNe(e,t){let n=t,r=n.children.length,i=e.childCount,a=new Map,o=[];outer:for(;i>0;){let s;for(;;)if(r){let e=n.children[r-1];if(e instanceof BX)n=e,r=e.children.length;else{s=e,r--;break}}else if(n==t)break outer;else r=n.parent.children.indexOf(n),n=n.parent;let c=s.node;if(c){if(c!=e.child(i-1))break;--i,a.set(s,i),o.push(s)}}return{index:i,matched:a,matches:o.reverse()}}function rNe(e,t){return e.type.side-t.type.side}function iNe(e,t,n,r){let i=t.locals(e),a=0;if(i.length==0){for(let n=0;n<e.childCount;n++){let o=e.child(n);r(o,i,t.forChild(a,o),n),a+=o.nodeSize}return}let o=0,s=[],c=null;for(let l=0;;){let u,d;for(;o<i.length&&i[o].to==a;){let e=i[o++];e.widget&&(u?(d||=[u]).push(e):u=e)}if(u)if(d){d.sort(rNe);for(let e=0;e<d.length;e++)n(d[e],l,!!c)}else n(u,l,!!c);let f,p;if(c)p=-1,f=c,c=null;else if(l<e.childCount)p=l,f=e.child(l++);else break;for(let e=0;e<s.length;e++)s[e].to<=a&&s.splice(e--,1);for(;o<i.length&&i[o].from<=a&&i[o].to>a;)s.push(i[o++]);let m=a+f.nodeSize;if(f.isText){let e=m;o<i.length&&i[o].from<e&&(e=i[o].from);for(let t=0;t<s.length;t++)s[t].to<e&&(e=s[t].to);e<m&&(c=f.cut(e-a),f=f.cut(0,e-a),m=e,p=-1)}else for(;o<i.length&&i[o].to<m;)o++;let h=f.isInline&&!f.isLeaf?s.filter(e=>!e.inline):s.slice();r(f,h,t.forChild(a,f),p),a=m}}function aNe(e){if(e.nodeName==`UL`||e.nodeName==`OL`){let t=e.style.cssText;e.style.cssText=t+`; list-style: square !important`,window.getComputedStyle(e).listStyle,e.style.cssText=t}}function oNe(e,t,n,r){for(let i=0,a=0;i<e.childCount&&a<=r;){let o=e.child(i++),s=a;if(a+=o.nodeSize,!o.isText)continue;let c=o.text;for(;i<e.childCount;){let t=e.child(i++);if(a+=t.nodeSize,!t.isText)break;c+=t.text}if(a>=n){if(a>=r&&c.slice(r-t.length-s,r-s)==t)return r-t.length;let e=s<r?c.lastIndexOf(t,r-s-1):-1;if(e>=0&&e+t.length+s>=n)return s+e;if(n==r&&c.length>=r+t.length-s&&c.slice(r-s,r-s+t.length)==t)return r}}return-1}function QX(e,t,n,r,i){let a=[];for(let o=0,s=0;o<e.length;o++){let c=e[o],l=s,u=s+=c.size;l>=n||u<=t?a.push(c):(l<t&&a.push(c.slice(0,t-l,r)),i&&=(a.push(i),void 0),u>n&&a.push(c.slice(n-l,c.size,r)))}return a}function $X(e,t=null){let n=e.domSelectionRange(),r=e.state.doc;if(!n.focusNode)return null;let i=e.docView.nearestDesc(n.focusNode),a=i&&i.size==0,o=e.docView.posFromDOM(n.focusNode,n.focusOffset,1);if(o<0)return null;let s=r.resolve(o),c,l;if(ZY(n)){for(c=o;i&&!i.node;)i=i.parent;let e=i.node;if(i&&e.isAtom&&nY.isSelectable(e)&&i.parent&&!(e.isInline&&MMe(n.focusNode,n.focusOffset,i.dom))){let e=i.posBefore;l=new nY(o==e?s:r.resolve(e))}}else{if(n instanceof e.dom.ownerDocument.defaultView.Selection&&n.rangeCount>1){let t=o,i=o;for(let r=0;r<n.rangeCount;r++){let a=n.getRangeAt(r);t=Math.min(t,e.docView.posFromDOM(a.startContainer,a.startOffset,1)),i=Math.max(i,e.docView.posFromDOM(a.endContainer,a.endOffset,-1))}if(t<0)return null;[c,o]=i==e.state.selection.anchor?[i,t]:[t,i],s=r.resolve(o)}else c=e.docView.posFromDOM(n.anchorNode,n.anchorOffset,1);if(c<0)return null}let u=r.resolve(c);if(!l){let n=t==`pointer`||e.state.selection.head<s.pos&&!a?1:-1;l=cZ(e,u,s,n)}return l}function eZ(e){return e.editable?e.hasFocus():uZ(e)&&document.activeElement&&document.activeElement.contains(e.dom)}function tZ(e,t=!1){let n=e.state.selection;if(oZ(e,n),!eZ(e))return;let r=e.input.mouseDown;if(!t&&lX&&r){let t=e.domSelectionRange(),n=e.domObserver.currentSelection;if(t.anchorNode&&n.anchorNode&&qY(t.anchorNode,t.anchorOffset,n.anchorNode,n.anchorOffset)&&r.delaySelUpdate()){e.domObserver.setCurSelection();return}}if(e.domObserver.disconnectSelection(),e.cursorWrapper)cNe(e);else{let{anchor:r,head:i}=n,a,o;nZ&&!(n instanceof eY)&&(n.$from.parent.inlineContent||(a=rZ(e,n.from)),!n.empty&&!n.$from.parent.inlineContent&&(o=rZ(e,n.to))),e.docView.setSelection(r,i,e,t),nZ&&(a&&aZ(a),o&&aZ(o)),n.visible?e.dom.classList.remove(`ProseMirror-hideselection`):(e.dom.classList.add(`ProseMirror-hideselection`),`onselectionchange`in document&&sNe(e))}e.domObserver.setCurSelection(),e.domObserver.connectSelection()}var nZ=dX||lX&&uX<63;function rZ(e,t){let{node:n,offset:r}=e.docView.domFromPos(t,0),i=r<n.childNodes.length?n.childNodes[r]:null,a=r?n.childNodes[r-1]:null;if(dX&&i&&i.contentEditable==`false`)return iZ(i);if((!i||i.contentEditable==`false`)&&(!a||a.contentEditable==`false`)){if(i)return iZ(i);if(a)return iZ(a)}}function iZ(e){return e.contentEditable=`true`,dX&&e.draggable&&(e.draggable=!1,e.wasDraggable=!0),e}function aZ(e){e.contentEditable=`false`,e.wasDraggable&&=(e.draggable=!0,null)}function sNe(e){let t=e.dom.ownerDocument;t.removeEventListener(`selectionchange`,e.input.hideSelectionGuard);let n=e.domSelectionRange(),r=n.anchorNode,i=n.anchorOffset;t.addEventListener(`selectionchange`,e.input.hideSelectionGuard=()=>{(n.anchorNode!=r||n.anchorOffset!=i)&&(t.removeEventListener(`selectionchange`,e.input.hideSelectionGuard),setTimeout(()=>{(!eZ(e)||e.state.selection.visible)&&e.dom.classList.remove(`ProseMirror-hideselection`)},20))})}function cNe(e){let t=e.domSelection();if(!t)return;let n=e.cursorWrapper.dom,r=n.nodeName==`IMG`;r?t.collapse(n.parentNode,UY(n)+1):t.collapse(n,0),!r&&!e.state.selection.visible&&aX&&oX<=11&&(n.disabled=!0,n.disabled=!1)}function oZ(e,t){if(t instanceof nY){let n=e.docView.descAt(t.from);n!=e.lastSelectedViewDesc&&(sZ(e),n&&n.selectNode(),e.lastSelectedViewDesc=n)}else sZ(e)}function sZ(e){e.lastSelectedViewDesc&&=(e.lastSelectedViewDesc.parent&&e.lastSelectedViewDesc.deselectNode(),void 0)}function cZ(e,t,n,r){return e.someProp(`createSelectionBetween`,r=>r(e,t,n))||eY.between(t,n,r)}function lZ(e){return e.editable&&!e.hasFocus()?!1:uZ(e)}function uZ(e){let t=e.domSelectionRange();if(!t.anchorNode)return!1;try{return e.dom.contains(t.anchorNode.nodeType==3?t.anchorNode.parentNode:t.anchorNode)&&(e.editable||e.dom.contains(t.focusNode.nodeType==3?t.focusNode.parentNode:t.focusNode))}catch{return!1}}function lNe(e){let t=e.docView.domFromPos(e.state.selection.anchor,0),n=e.domSelectionRange();return qY(t.node,t.offset,n.anchorNode,n.anchorOffset)}function dZ(e,t){let{$anchor:n,$head:r}=e.selection,i=t>0?n.max(r):n.min(r),a=i.parent.inlineContent?i.depth?e.doc.resolve(t>0?i.after():i.before()):null:i;return a&&ZJ.findFrom(a,t)}function fZ(e,t){return e.dispatch(e.state.tr.setSelection(t).scrollIntoView()),!0}function pZ(e,t,n){let r=e.state.selection;if(r instanceof eY){if(n.indexOf(`s`)>-1){let{$head:n}=r,i=n.textOffset?null:t<0?n.nodeBefore:n.nodeAfter;if(!i||i.isText||!i.isLeaf)return!1;let a=e.state.doc.resolve(n.pos+i.nodeSize*(t<0?-1:1));return fZ(e,new eY(r.$anchor,a))}else if(!r.empty)return!1;else if(e.endOfTextblock(t>0?`forward`:`backward`)){let n=dZ(e.state,t);return n&&n instanceof nY?fZ(e,n):!1}else if(!(pX&&n.indexOf(`m`)>-1)){let n=r.$head,i=n.textOffset?null:t<0?n.nodeBefore:n.nodeAfter,a;if(!i||i.isText)return!1;let o=t<0?n.pos-i.nodeSize:n.pos;return i.isAtom||(a=e.docView.descAt(o))&&!a.contentDOM?nY.isSelectable(i)?fZ(e,new nY(t<0?e.state.doc.resolve(n.pos-i.nodeSize):n)):gX?fZ(e,new eY(e.state.doc.resolve(t<0?o:o+i.nodeSize))):!1:!1}}else if(r instanceof nY&&r.node.isInline)return fZ(e,new eY(t>0?r.$to:r.$from));else{let n=dZ(e.state,t);return n?fZ(e,n):!1}}function mZ(e){return e.nodeType==3?e.nodeValue.length:e.childNodes.length}function hZ(e,t){let n=e.pmViewDesc;return n&&n.size==0&&(t<0||e.nextSibling||e.nodeName!=`BR`)}function gZ(e,t){return t<0?uNe(e):dNe(e)}function uNe(e){let t=e.domSelectionRange(),n=t.focusNode,r=t.focusOffset;if(!n)return;let i,a,o=!1;for(sX&&n.nodeType==1&&r<mZ(n)&&hZ(n.childNodes[r],-1)&&(o=!0);;)if(r>0){if(n.nodeType!=1)break;{let e=n.childNodes[r-1];if(hZ(e,-1))i=n,a=--r;else if(e.nodeType==3)n=e,r=n.nodeValue.length;else break}}else if(_Z(n))break;else{let t=n.previousSibling;for(;t&&hZ(t,-1);)i=n.parentNode,a=UY(t),t=t.previousSibling;if(t)n=t,r=mZ(n);else{if(n=n.parentNode,n==e.dom)break;r=0}}o?vZ(e,n,r):i&&vZ(e,i,a)}function dNe(e){let t=e.domSelectionRange(),n=t.focusNode,r=t.focusOffset;if(!n)return;let i=mZ(n),a,o;for(;;)if(r<i){if(n.nodeType!=1)break;let e=n.childNodes[r];if(hZ(e,1))a=n,o=++r;else break}else if(_Z(n))break;else{let t=n.nextSibling;for(;t&&hZ(t,1);)a=t.parentNode,o=UY(t)+1,t=t.nextSibling;if(t)n=t,r=0,i=mZ(n);else{if(n=n.parentNode,n==e.dom)break;r=i=0}}a&&vZ(e,a,o)}function _Z(e){let t=e.pmViewDesc;return t&&t.node&&t.node.isBlock}function fNe(e,t){for(;e&&t==e.childNodes.length&&!XY(e);)t=UY(e)+1,e=e.parentNode;for(;e&&t<e.childNodes.length;){let n=e.childNodes[t];if(n.nodeType==3)return n;if(n.nodeType==1&&n.contentEditable==`false`)break;e=n,t=0}}function pNe(e,t){for(;e&&!t&&!XY(e);)t=UY(e),e=e.parentNode;for(;e&&t;){let n=e.childNodes[t-1];if(n.nodeType==3)return n;if(n.nodeType==1&&n.contentEditable==`false`)break;e=n,t=e.childNodes.length}}function vZ(e,t,n){if(t.nodeType!=3){let e,r;(r=fNe(t,n))?(t=r,n=0):(e=pNe(t,n))&&(t=e,n=e.nodeValue.length)}let r=e.domSelection();if(!r)return;if(ZY(r)){let e=document.createRange();e.setEnd(t,n),e.setStart(t,n),r.removeAllRanges(),r.addRange(e)}else r.extend&&r.extend(t,n);e.domObserver.setCurSelection();let{state:i}=e;setTimeout(()=>{e.state==i&&tZ(e)},50)}function yZ(e,t){let n=e.state.doc.resolve(t);if(!(lX||mX)&&n.parent.inlineContent){let r=e.coordsAtPos(t);if(t>n.start()){let n=e.coordsAtPos(t-1),i=(n.top+n.bottom)/2;if(i>r.top&&i<r.bottom&&Math.abs(n.left-r.left)>1)return n.left<r.left?`ltr`:`rtl`}if(t<n.end()){let n=e.coordsAtPos(t+1),i=(n.top+n.bottom)/2;if(i>r.top&&i<r.bottom&&Math.abs(n.left-r.left)>1)return n.left>r.left?`ltr`:`rtl`}}return getComputedStyle(e.dom).direction==`rtl`?`rtl`:`ltr`}function bZ(e,t,n){let r=e.state.selection;if(r instanceof eY&&!r.empty||n.indexOf(`s`)>-1||pX&&n.indexOf(`m`)>-1)return!1;let{$from:i,$to:a}=r;if(!i.parent.inlineContent||e.endOfTextblock(t<0?`up`:`down`)){let n=dZ(e.state,t);if(n&&n instanceof nY)return fZ(e,n)}if(!i.parent.inlineContent){let n=t<0?i:a,o=r instanceof rY?ZJ.near(n,t):ZJ.findFrom(n,t);return o?fZ(e,o):!1}return!1}function xZ(e,t){if(!(e.state.selection instanceof eY))return!0;let{$head:n,$anchor:r,empty:i}=e.state.selection;if(!n.sameParent(r))return!0;if(!i)return!1;if(e.endOfTextblock(t>0?`forward`:`backward`))return!0;let a=!n.textOffset&&(t<0?n.nodeBefore:n.nodeAfter);if(a&&!a.isText){let r=e.state.tr;return t<0?r.delete(n.pos-a.nodeSize,n.pos):r.delete(n.pos,n.pos+a.nodeSize),e.dispatch(r),!0}return!1}function SZ(e,t,n){e.domObserver.stop(),t.contentEditable=n,e.domObserver.start()}function mNe(e){if(!dX||e.state.selection.$head.parentOffset>0)return!1;let{focusNode:t,focusOffset:n}=e.domSelectionRange();if(t&&t.nodeType==1&&n==0&&t.firstChild&&t.firstChild.contentEditable==`false`){let n=t.firstChild;SZ(e,n,`true`),setTimeout(()=>SZ(e,n,`false`),20)}return!1}function hNe(e){let t=``;return e.ctrlKey&&(t+=`c`),e.metaKey&&(t+=`m`),e.altKey&&(t+=`a`),e.shiftKey&&(t+=`s`),t}function gNe(e,t){let n=t.keyCode,r=hNe(t);if(n==8||pX&&n==72&&r==`c`)return xZ(e,-1)||gZ(e,-1);if(n==46&&!t.shiftKey||pX&&n==68&&r==`c`)return xZ(e,1)||gZ(e,1);if(n==13||n==27)return!0;if(n==37||pX&&n==66&&r==`c`){let t=n==37?yZ(e,e.state.selection.from)==`ltr`?-1:1:-1;return pZ(e,t,r)||gZ(e,t)}else if(n==39||pX&&n==70&&r==`c`){let t=n==39?yZ(e,e.state.selection.from)==`ltr`?1:-1:1;return pZ(e,t,r)||gZ(e,t)}else if(n==38||pX&&n==80&&r==`c`)return bZ(e,-1,r)||gZ(e,-1);else if(n==40||pX&&n==78&&r==`c`)return mNe(e)||bZ(e,1,r)||gZ(e,1);else if(r==(pX?`m`:`c`)&&(n==66||n==73||n==89||n==90))return!0;return!1}function CZ(e,t){e.someProp(`transformCopied`,n=>{t=n(t,e)});let n=[],{content:r,openStart:i,openEnd:a}=t;for(;i>1&&a>1&&r.childCount==1&&r.firstChild.childCount==1;){i--,a--;let e=r.firstChild;n.push(e.type.name,e.attrs==e.type.defaultAttrs?null:e.attrs),r=e.content}let o=e.someProp(`clipboardSerializer`)||tJ.fromSchema(e.state.schema),s=jZ(),c=s.createElement(`div`);c.appendChild(o.serializeFragment(r,{document:s}));let l=c.firstChild,u,d=0;for(;l&&l.nodeType==1&&(u=AZ[l.nodeName.toLowerCase()]);){for(let e=u.length-1;e>=0;e--){let t=s.createElement(u[e]);for(;c.firstChild;)t.appendChild(c.firstChild);c.appendChild(t),d++}l=c.firstChild}return l&&l.nodeType==1&&l.setAttribute(`data-pm-slice`,`${i} ${a}${d?` -${d}`:``} ${JSON.stringify(n)}`),{dom:c,text:e.someProp(`clipboardTextSerializer`,n=>n(t,e))||t.content.textBetween(0,t.content.size,`
 
-`),slice:t}}function xZ(e,t,n,r,i){let a=i.parent.type.spec.code,o,s;if(!n&&!t)return null;let c=!!t&&(r||a||!n);if(c){if(e.someProp(`transformPastedText`,n=>{t=n(t,a||r,e)}),a)return s=new fq(oq.from(e.state.schema.text(t.replace(/\r\n?/g,`
-`))),0,0),e.someProp(`transformPasted`,t=>{s=t(s,e,!0)}),s;let n=e.someProp(`clipboardTextParser`,n=>n(t,i,r,e));if(n)s=n;else{let n=i.marks(),{schema:r}=e.state,a=Qq.fromSchema(r);o=document.createElement(`div`),t.split(/(?:\r\n?|\n)+/).forEach(e=>{let t=o.appendChild(document.createElement(`p`));e&&t.appendChild(a.serializeNode(r.text(e,n)))})}}else e.someProp(`transformPastedHTML`,t=>{n=t(n,e)}),o=yNe(n),pX&&bNe(o);let l=o&&o.querySelector(`[data-pm-slice]`),u=l&&/^(\d+) (\d+)(?: -(\d+))? (.*)/.exec(l.getAttribute(`data-pm-slice`)||``);if(u&&u[3])for(let e=+u[3];e>0;e--){let e=o.firstChild;for(;e&&e.nodeType!=1;)e=e.nextSibling;if(!e)break;o=e}if(s||=(e.someProp(`clipboardParser`)||e.someProp(`domParser`)||Vq.fromSchema(e.state.schema)).parseSlice(o,{preserveWhitespace:!!(c||u),context:i,ruleFromNode(e){return e.nodeName==`BR`&&!e.nextSibling&&e.parentNode&&!gNe.test(e.parentNode.nodeName)?{ignore:!0}:null}}),u)s=xNe(EZ(s,+u[1],+u[2]),u[4]);else if(s=fq.maxOpen(_Ne(s.content,i),!0),s.openStart||s.openEnd){let e=0,t=0;for(let t=s.content.firstChild;e<s.openStart&&!t.type.spec.isolating;e++,t=t.firstChild);for(let e=s.content.lastChild;t<s.openEnd&&!e.type.spec.isolating;t++,e=e.lastChild);s=EZ(s,e,t)}return e.someProp(`transformPasted`,t=>{s=t(s,e,c)}),s}var gNe=/^(a|abbr|acronym|b|cite|code|del|em|i|ins|kbd|label|output|q|ruby|s|samp|span|strong|sub|sup|time|u|tt|var)$/i;function _Ne(e,t){if(e.childCount<2)return e;for(let n=t.depth;n>=0;n--){let r=t.node(n).contentMatchAt(t.index(n)),i,a=[];if(e.forEach(e=>{if(!a)return;let t=r.findWrapping(e.type),n;if(!t)return a=null;if(n=a.length&&i.length&&CZ(t,i,e,a[a.length-1],0))a[a.length-1]=n;else{a.length&&(a[a.length-1]=wZ(a[a.length-1],i.length));let n=SZ(e,t);a.push(n),r=r.matchType(n.type),i=t}}),a)return oq.from(a)}return e}function SZ(e,t,n=0){for(let r=t.length-1;r>=n;r--)e=t[r].create(null,oq.from(e));return e}function CZ(e,t,n,r,i){if(i<e.length&&i<t.length&&e[i]==t[i]){let a=CZ(e,t,n,r.lastChild,i+1);if(a)return r.copy(r.content.replaceChild(r.childCount-1,a));if(r.contentMatchAt(r.childCount).matchType(i==e.length-1?n.type:e[i+1]))return r.copy(r.content.append(oq.from(SZ(n,e,i+1))))}}function wZ(e,t){if(t==0)return e;let n=e.content.replaceChild(e.childCount-1,wZ(e.lastChild,t-1)),r=e.contentMatchAt(e.childCount).fillBefore(oq.empty,!0);return e.copy(n.append(r))}function TZ(e,t,n,r,i,a){let o=t<0?e.firstChild:e.lastChild,s=o.content;return e.childCount>1&&(a=0),i<r-1&&(s=TZ(s,t,n,r,i+1,a)),i>=n&&(s=t<0?o.contentMatchAt(0).fillBefore(s,a<=i).append(s):s.append(o.contentMatchAt(o.childCount).fillBefore(oq.empty,!0))),e.replaceChild(t<0?0:e.childCount-1,o.copy(s))}function EZ(e,t,n){return t<e.openStart&&(e=new fq(TZ(e.content,-1,t,e.openStart,0,e.openEnd),t,e.openEnd)),n<e.openEnd&&(e=new fq(TZ(e.content,1,n,e.openEnd,0,0),e.openStart,n)),e}var DZ={thead:[`table`],tbody:[`table`],tfoot:[`table`],caption:[`table`],colgroup:[`table`],col:[`table`,`colgroup`],tr:[`table`,`tbody`],td:[`table`,`tbody`,`tr`],th:[`table`,`tbody`,`tr`]};function OZ(){return document.implementation.createHTMLDocument(`title`)}var kZ=null;function vNe(e){let t=window.trustedTypes;if(!t)return e;if(!kZ){if(kZ=t.defaultPolicy)try{return kZ.createHTML(e)}catch{}kZ=t.createPolicy(`ProseMirrorClipboard`,{createHTML:e=>e})}return kZ.createHTML(e)}function yNe(e){let t=/^(\s*<meta [^>]*>)*/.exec(e);t&&(e=e.slice(t[0].length));let n=OZ(),r=n.body,i=/<([a-z][^>\s]+)/i.exec(e),a;if((a=i&&DZ[i[1].toLowerCase()])&&(e=a.map(e=>`<`+e+`>`).join(``)+e+a.map(e=>`</`+e+`>`).reverse().join(``)),r.innerHTML=vNe(e),a)for(let e=0;e<a.length;e++)r=r.querySelector(a[e])||r;for(let e=0;e<n.styleSheets.length;e++){let t=n.styleSheets[e];for(let e=0;e<t.rules.length;e++){let n=t.rules[e];if(n instanceof CSSStyleRule){let e=r.querySelectorAll(n.selectorText);for(let t=0;t<e.length;t++)e[t].style.cssText+=n.style.cssText}}}return r}function bNe(e){let t=e.querySelectorAll(oX?`span:not([class]):not([style])`:`span.Apple-converted-space`);for(let n=0;n<t.length;n++){let r=t[n];r.childNodes.length==1&&r.textContent==`\xA0`&&r.parentNode&&r.parentNode.replaceChild(e.ownerDocument.createTextNode(` `),r)}}function xNe(e,t){if(!e.size)return e;let n=e.content.firstChild.type.schema,r;try{r=JSON.parse(t)}catch{return e}let{content:i,openStart:a,openEnd:o}=e;for(let e=r.length-2;e>=0;e-=2){let t=n.nodes[r[e]];if(!t||t.hasRequiredAttrs())break;try{t.checkAttrs(r[e+1])}catch{break}i=oq.from(t.create(r[e+1],i)),a++,o++}return new fq(i,a,o)}var AZ={},jZ={},SNe={touchstart:!0,touchmove:!0},CNe=class{constructor(){this.shiftKey=!1,this.mouseDown=null,this.lastKeyCode=null,this.lastKeyCodeTime=0,this.lastClick={time:0,x:0,y:0,type:``,button:0},this.lastSelectionOrigin=null,this.lastSelectionTime=0,this.lastIOSEnter=0,this.lastIOSEnterFallbackTimeout=-1,this.lastFocus=0,this.lastTouch=0,this.lastChromeDelete=0,this.composing=!1,this.compositionNode=null,this.composingTimeout=-1,this.compositionNodes=[],this.compositionEndedAt=-2e8,this.compositionID=1,this.badSafariComposition=!1,this.compositionPendingChanges=0,this.domChangeCount=0,this.eventHandlers=Object.create(null),this.hideSelectionGuard=null}};function wNe(e){for(let t in AZ){let n=AZ[t];e.dom.addEventListener(t,e.input.eventHandlers[t]=t=>{ENe(e,t)&&!PZ(e,t)&&(e.editable||!(t.type in jZ))&&n(e,t)},SNe[t]?{passive:!0}:void 0)}cX&&e.dom.addEventListener(`input`,()=>null),NZ(e)}function MZ(e,t){e.input.lastSelectionOrigin=t,e.input.lastSelectionTime=Date.now()}function TNe(e){e.input.mouseDown&&e.input.mouseDown.done(),e.domObserver.stop();for(let t in e.input.eventHandlers)e.dom.removeEventListener(t,e.input.eventHandlers[t]);clearTimeout(e.input.composingTimeout),clearTimeout(e.input.lastIOSEnterFallbackTimeout)}function NZ(e){e.someProp(`handleDOMEvents`,t=>{for(let n in t)e.input.eventHandlers[n]||e.dom.addEventListener(n,e.input.eventHandlers[n]=t=>PZ(e,t))})}function PZ(e,t){return e.someProp(`handleDOMEvents`,n=>{let r=n[t.type];return r?r(e,t)||t.defaultPrevented:!1})}function ENe(e,t){if(!t.bubbles)return!0;if(t.defaultPrevented)return!1;for(let n=t.target;n!=e.dom;n=n.parentNode)if(!n||n.nodeType==11||n.pmViewDesc&&n.pmViewDesc.stopEvent(t))return!1;return!0}function DNe(e,t){!PZ(e,t)&&AZ[t.type]&&(e.editable||!(t.type in jZ))&&AZ[t.type](e,t)}jZ.keydown=(e,t)=>{let n=t;if(e.input.shiftKey=n.keyCode==16||n.shiftKey,!HZ(e)&&(e.input.lastKeyCode=n.keyCode,e.input.lastKeyCodeTime=Date.now(),!(fX&&oX&&n.keyCode==13)))if(n.keyCode!=229&&e.domObserver.forceFlush(),lX&&n.keyCode==13&&!n.ctrlKey&&!n.altKey&&!n.metaKey){let t=Date.now();e.input.lastIOSEnter=t,e.input.lastIOSEnterFallbackTimeout=setTimeout(()=>{e.input.lastIOSEnter==t&&(e.someProp(`handleKeyDown`,t=>t(e,YY(13,`Enter`))),e.input.lastIOSEnter=0)},200)}else e.someProp(`handleKeyDown`,t=>t(e,n))||hNe(e,n)?n.preventDefault():MZ(e,`key`)},jZ.keyup=(e,t)=>{t.keyCode==16&&(e.input.shiftKey=!1)},jZ.keypress=(e,t)=>{let n=t;if(HZ(e)||!n.charCode||n.ctrlKey&&!n.altKey||uX&&n.metaKey)return;if(e.someProp(`handleKeyPress`,t=>t(e,n))){n.preventDefault();return}let r=e.state.selection;if(!(r instanceof ZJ)||!r.$from.sameParent(r.$to)){let t=String.fromCharCode(n.charCode),i=()=>e.state.tr.insertText(t).scrollIntoView();!/[\r\n]/.test(t)&&!e.someProp(`handleTextInput`,n=>n(e,r.$from.pos,r.$to.pos,t,i))&&e.dispatch(i()),n.preventDefault()}};function FZ(e){return{left:e.clientX,top:e.clientY}}function ONe(e,t){let n=t.x-e.clientX,r=t.y-e.clientY;return n*n+r*r<100}function IZ(e,t,n,r,i){if(r==-1)return!1;let a=e.state.doc.resolve(r);for(let r=a.depth+1;r>0;r--)if(e.someProp(t,t=>r>a.depth?t(e,n,a.nodeAfter,a.before(r),i,!0):t(e,n,a.node(r),a.before(r),i,!1)))return!0;return!1}function LZ(e,t,n){if(e.focused||e.focus(),e.state.selection.eq(t))return;let r=e.state.tr.setSelection(t);n==`pointer`&&r.setMeta(`pointer`,!0),e.dispatch(r)}function kNe(e,t){if(t==-1)return!1;let n=e.state.doc.resolve(t),r=n.nodeAfter;return r&&r.isAtom&&$J.isSelectable(r)?(LZ(e,new $J(n),`pointer`),!0):!1}function ANe(e,t){if(t==-1)return!1;let n=e.state.selection,r,i;n instanceof $J&&(r=n.node);let a=e.state.doc.resolve(t);for(let e=a.depth+1;e>0;e--){let t=e>a.depth?a.nodeAfter:a.node(e);if($J.isSelectable(t)){i=r&&n.$from.depth>0&&e>=n.$from.depth&&a.before(n.$from.depth+1)==n.$from.pos?a.before(n.$from.depth):a.before(e);break}}return i==null?!1:(LZ(e,$J.create(e.state.doc,i),`pointer`),!0)}function jNe(e,t,n,r,i){return IZ(e,`handleClickOn`,t,n,r)||e.someProp(`handleClick`,n=>n(e,t,r))||(i?ANe(e,n):kNe(e,n))}function MNe(e,t,n,r){return IZ(e,`handleDoubleClickOn`,t,n,r)||e.someProp(`handleDoubleClick`,n=>n(e,t,r))}function NNe(e,t,n,r){return IZ(e,`handleTripleClickOn`,t,n,r)||e.someProp(`handleTripleClick`,n=>n(e,t,r))||PNe(e,n,r)}function PNe(e,t,n){if(n.button!=0)return!1;let r=RZ(e,t,!0),i=e.state.doc;return r?(LZ(e,r,`pointer`),r instanceof ZJ&&i.eq(e.state.doc)&&(e.input.mouseDown=new INe(e,r)),!0):!1}function RZ(e,t,n){let r=e.state.doc;if(t==-1)return r.inlineContent?ZJ.create(r,0,r.content.size):null;let i=r.resolve(t);for(let e=i.depth+1;e>0;e--){let t=e>i.depth?i.nodeAfter:i.node(e),a=i.before(e);if(t.inlineContent)return ZJ.create(r,a+1,a+1+t.content.size);if(n&&$J.isSelectable(t))return $J.create(r,a)}return null}function zZ(e){return GZ(e)}var BZ=uX?`metaKey`:`ctrlKey`;AZ.mousedown=(e,t)=>{let n=t;e.input.shiftKey=n.shiftKey;let r=zZ(e),i=Date.now(),a=`singleClick`;i-e.input.lastClick.time<500&&ONe(n,e.input.lastClick)&&!n[BZ]&&e.input.lastClick.button==n.button&&(e.input.lastClick.type==`singleClick`?a=`doubleClick`:e.input.lastClick.type==`doubleClick`&&(a=`tripleClick`)),e.input.lastClick={time:i,x:n.clientX,y:n.clientY,type:a,button:n.button},e.input.mouseDown&&e.input.mouseDown.done();let o=e.posAtCoords(FZ(n));o&&(a==`singleClick`?e.input.mouseDown=new FNe(e,o,n,!!r):(a==`doubleClick`?MNe:NNe)(e,o.pos,o.inside,n)?n.preventDefault():MZ(e,`pointer`))};var VZ=class{constructor(e){this.view=e,this.mightDrag=null,e.root.addEventListener(`mouseup`,this.up=this.up.bind(this)),e.root.addEventListener(`mousemove`,this.move=this.move.bind(this))}up(e){this.done()}move(e){e.buttons==0&&this.done()}done(){this.view.root.removeEventListener(`mouseup`,this.up),this.view.root.removeEventListener(`mousemove`,this.move),this.view.input.mouseDown==this&&(this.view.input.mouseDown=null)}delaySelUpdate(){return!1}},FNe=class extends VZ{constructor(e,t,n,r){super(e),this.pos=t,this.event=n,this.flushed=r,this.delayedSelectionSync=!1,this.startDoc=e.state.doc,this.selectNode=!!n[BZ],this.allowDefault=n.shiftKey;let i,a;if(t.inside>-1)i=e.state.doc.nodeAt(t.inside),a=t.inside;else{let n=e.state.doc.resolve(t.pos);i=n.parent,a=n.depth?n.before():0}let o=r?null:n.target,s=o?e.docView.nearestDesc(o,!0):null;this.target=s&&s.nodeDOM.nodeType==1?s.nodeDOM:null;let{selection:c}=e.state;n.button==0&&(i.type.spec.draggable&&i.type.spec.selectable!==!1||c instanceof $J&&c.from<=a&&c.to>a)&&(this.mightDrag={node:i,pos:a,addAttr:!!(this.target&&!this.target.draggable),setUneditable:!!(this.target&&iX&&!this.target.hasAttribute(`contentEditable`))}),this.target&&this.mightDrag&&(this.mightDrag.addAttr||this.mightDrag.setUneditable)&&(this.view.domObserver.stop(),this.mightDrag.addAttr&&(this.target.draggable=!0),this.mightDrag.setUneditable&&setTimeout(()=>{this.view.input.mouseDown==this&&this.target.setAttribute(`contentEditable`,`false`)},20),this.view.domObserver.start()),MZ(e,`pointer`)}done(){super.done(),this.mightDrag&&this.target&&(this.view.domObserver.stop(),this.mightDrag.addAttr&&this.target.removeAttribute(`draggable`),this.mightDrag.setUneditable&&this.target.removeAttribute(`contentEditable`),this.view.domObserver.start()),this.delayedSelectionSync&&setTimeout(()=>{this.view.isDestroyed||QX(this.view)})}up(e){if(this.done(),!this.view.dom.contains(e.target))return;let t=this.pos;this.view.state.doc!=this.startDoc&&(t=this.view.posAtCoords(FZ(e))),this.updateAllowDefault(e),this.allowDefault||!t?MZ(this.view,`pointer`):jNe(this.view,t.pos,t.inside,e,this.selectNode)?e.preventDefault():e.button==0&&(this.flushed||cX&&this.mightDrag&&!this.mightDrag.node.isAtom||oX&&!this.view.state.selection.visible&&Math.min(Math.abs(t.pos-this.view.state.selection.from),Math.abs(t.pos-this.view.state.selection.to))<=2)?(LZ(this.view,JJ.near(this.view.state.doc.resolve(t.pos)),`pointer`),e.preventDefault()):MZ(this.view,`pointer`)}move(e){this.updateAllowDefault(e),MZ(this.view,`pointer`),super.move(e)}updateAllowDefault(e){!this.allowDefault&&(Math.abs(this.event.x-e.clientX)>4||Math.abs(this.event.y-e.clientY)>4)&&(this.allowDefault=!0)}delaySelUpdate(){return this.allowDefault?(this.delayedSelectionSync=!0,!0):!1}},INe=class extends VZ{constructor(e,t){super(e),this.startSelection=t,this.startDoc=e.state.doc}move(e){if(e.buttons==0||this.view.isDestroyed||!this.view.state.doc.eq(this.startDoc)){this.done();return}e.preventDefault(),MZ(this.view,`pointer`);let t=this.view.posAtCoords(FZ(e)),n=t&&RZ(this.view,t.inside,!1);if(!n)return;let{doc:r}=this.view.state,i=this.startSelection,[a,o]=n.from<i.from?[i.to,n.from]:[i.from,n.to];LZ(this.view,ZJ.create(r,a,o),`pointer`)}};AZ.touchstart=e=>{e.input.lastTouch=Date.now(),zZ(e),MZ(e,`pointer`)},AZ.touchmove=e=>{e.input.lastTouch=Date.now(),MZ(e,`pointer`)},AZ.contextmenu=e=>zZ(e);function HZ(e,t){return e.composing?!0:cX&&Math.abs(Date.now()-e.input.compositionEndedAt)<500?(e.input.compositionEndedAt=-2e8,!0):!1}var LNe=fX?5e3:-1;jZ.compositionstart=jZ.compositionupdate=e=>{if(!e.composing){e.domObserver.flush();let{state:t}=e,n=t.selection.$to;if(t.selection instanceof ZJ&&(t.storedMarks||!n.textOffset&&n.parentOffset&&n.nodeBefore.marks.some(e=>e.type.spec.inclusive===!1)||oX&&dX&&RNe(e)))e.markCursor=e.state.storedMarks||n.marks(),GZ(e,!0),e.markCursor=null;else if(GZ(e,!t.selection.empty),iX&&t.selection.empty&&n.parentOffset&&!n.textOffset&&n.nodeBefore.marks.length){let t=e.domSelectionRange();for(let n=t.focusNode,r=t.focusOffset;n&&n.nodeType==1&&r!=0;){let t=r<0?n.lastChild:n.childNodes[r-1];if(!t)break;if(t.nodeType==3){let n=e.domSelection();n&&n.collapse(t,t.nodeValue.length);break}else n=t,r=-1}}e.input.composing=!0}UZ(e,LNe)};function RNe(e){let{focusNode:t,focusOffset:n}=e.domSelectionRange();if(!t||t.nodeType!=1||n>=t.childNodes.length)return!1;let r=t.childNodes[n];return r.nodeType==1&&r.contentEditable==`false`}jZ.compositionend=(e,t)=>{e.composing&&(e.input.composing=!1,e.input.compositionEndedAt=Date.now(),e.input.compositionPendingChanges=e.domObserver.pendingRecords().length?e.input.compositionID:0,e.input.compositionNode=null,e.input.badSafariComposition?e.domObserver.forceFlush():e.input.compositionPendingChanges&&Promise.resolve().then(()=>e.domObserver.flush()),e.input.compositionID++,UZ(e,20))};function UZ(e,t){clearTimeout(e.input.composingTimeout),t>-1&&(e.input.composingTimeout=setTimeout(()=>GZ(e),t))}function WZ(e){for(e.composing&&(e.input.composing=!1,e.input.compositionEndedAt=Date.now());e.input.compositionNodes.length>0;)e.input.compositionNodes.pop().markParentsDirty()}function zNe(e){let t=e.domSelectionRange();if(!t.focusNode)return null;let n=kMe(t.focusNode,t.focusOffset),r=AMe(t.focusNode,t.focusOffset);if(n&&r&&n!=r){let t=r.pmViewDesc,i=e.domObserver.lastChangedTextNode;if(n==i||r==i)return i;if(!t||!t.isText(r.nodeValue))return r;if(e.input.compositionNode==r){let e=n.pmViewDesc;if(!(!e||!e.isText(n.nodeValue)))return r}}return n||r}function GZ(e,t=!1){if(!(fX&&e.domObserver.flushingSoon>=0)){if(e.domObserver.forceFlush(),WZ(e),t||e.docView&&e.docView.dirty){let n=XX(e),r=e.state.selection;return n&&!n.eq(r)?e.dispatch(e.state.tr.setSelection(n)):(e.markCursor||t)&&!r.$from.node(r.$from.sharedDepth(r.to)).inlineContent?e.dispatch(e.state.tr.deleteSelection()):e.updateState(e.state),!0}return!1}}function BNe(e,t){if(!e.dom.parentNode)return;let n=e.dom.parentNode.appendChild(document.createElement(`div`));n.appendChild(t),n.style.cssText=`position: fixed; left: -10000px; top: 10px`;let r=getSelection(),i=document.createRange();i.selectNodeContents(t),e.dom.blur(),r.removeAllRanges(),r.addRange(i),setTimeout(()=>{n.parentNode&&n.parentNode.removeChild(n),e.focus()},50)}var KZ=nX&&rX<15||lX&&PMe<604;AZ.copy=jZ.cut=(e,t)=>{let n=t,r=e.state.selection,i=n.type==`cut`;if(r.empty)return;let a=KZ?null:n.clipboardData,{dom:o,text:s}=bZ(e,r.content());a?(n.preventDefault(),a.clearData(),a.setData(`text/html`,o.innerHTML),a.setData(`text/plain`,s)):BNe(e,o),i&&e.dispatch(e.state.tr.deleteSelection().scrollIntoView().setMeta(`uiEvent`,`cut`))};function VNe(e){return e.openStart==0&&e.openEnd==0&&e.content.childCount==1?e.content.firstChild:null}function HNe(e,t){if(!e.dom.parentNode)return;let n=e.input.shiftKey||e.state.selection.$from.parent.type.spec.code,r=e.dom.parentNode.appendChild(document.createElement(n?`textarea`:`div`));n||(r.contentEditable=`true`),r.style.cssText=`position: fixed; left: -10000px; top: 10px`,r.focus();let i=e.input.shiftKey&&e.input.lastKeyCode!=45;setTimeout(()=>{e.focus(),r.parentNode&&r.parentNode.removeChild(r),n?qZ(e,r.value,null,i,t):qZ(e,r.textContent,r.innerHTML,i,t)},50)}function qZ(e,t,n,r,i){let a=xZ(e,t,n,r,e.state.selection.$from);if(e.someProp(`handlePaste`,t=>t(e,i,a||fq.empty)))return!0;if(!a)return!1;let o=VNe(a),s=o?e.state.tr.replaceSelectionWith(o,r):e.state.tr.replaceSelection(a);return e.dispatch(s.scrollIntoView().setMeta(`paste`,!0).setMeta(`uiEvent`,`paste`)),!0}function JZ(e){let t=e.getData(`text/plain`)||e.getData(`Text`);if(t)return t;let n=e.getData(`text/uri-list`);return n?n.replace(/\r?\n/g,` `):``}jZ.paste=(e,t)=>{let n=t;if(e.composing&&!fX)return;let r=KZ?null:n.clipboardData,i=e.input.shiftKey&&e.input.lastKeyCode!=45;r&&qZ(e,JZ(r),r.getData(`text/html`),i,n)?n.preventDefault():HNe(e,n)};var YZ=class{constructor(e,t,n){this.slice=e,this.move=t,this.node=n}},UNe=uX?`altKey`:`ctrlKey`;function XZ(e,t){let n;return e.someProp(`dragCopies`,e=>{n||=e(t)}),n==null?!t[UNe]:!n}AZ.dragstart=(e,t)=>{let n=t,r=e.input.mouseDown;if(r&&r.done(),!n.dataTransfer)return;let i=e.state.selection,a=i.empty?null:e.posAtCoords(FZ(n)),o;if(!(a&&a.pos>=i.from&&a.pos<=(i instanceof $J?i.to-1:i.to))){if(r&&r.mightDrag)o=$J.create(e.state.doc,r.mightDrag.pos);else if(n.target&&n.target.nodeType==1){let t=e.docView.nearestDesc(n.target,!0);t&&t.node.type.spec.draggable&&t!=e.docView&&(o=$J.create(e.state.doc,t.posBefore))}}let{dom:s,text:c,slice:l}=bZ(e,(o||e.state.selection).content());(!n.dataTransfer.files.length||!oX||sX>120)&&n.dataTransfer.clearData(),n.dataTransfer.setData(KZ?`Text`:`text/html`,s.innerHTML),n.dataTransfer.effectAllowed=`copyMove`,KZ||n.dataTransfer.setData(`text/plain`,c),e.dragging=new YZ(l,XZ(e,n),o)},AZ.dragend=e=>{let t=e.dragging;window.setTimeout(()=>{e.dragging==t&&(e.dragging=null)},50)},jZ.dragover=jZ.dragenter=(e,t)=>t.preventDefault(),jZ.drop=(e,t)=>{try{WNe(e,t,e.dragging)}finally{e.dragging=null}};function WNe(e,t,n){if(!t.dataTransfer)return;let r=e.posAtCoords(FZ(t));if(!r)return;let i=e.state.doc.resolve(r.pos),a=n&&n.slice;a?e.someProp(`transformPasted`,t=>{a=t(a,e,!1)}):a=xZ(e,JZ(t.dataTransfer),KZ?null:t.dataTransfer.getData(`text/html`),!1,i);let o=!!(n&&XZ(e,t));if(e.someProp(`handleDrop`,n=>n(e,t,a||fq.empty,o))){t.preventDefault();return}if(!a)return;t.preventDefault();let s=a?MJ(e.state.doc,i.pos,a):i.pos;s??=i.pos;let c=e.state.tr;if(o){let{node:e}=n;e?e.replace(c):c.deleteSelection()}let l=c.mapping.map(s),u=a.openStart==0&&a.openEnd==0&&a.content.childCount==1,d=c.doc;if(u?c.replaceRangeWith(l,l,a.content.firstChild):c.replaceRange(l,l,a),c.doc.eq(d))return;let f=c.doc.resolve(l);if(u&&$J.isSelectable(a.content.firstChild)&&f.nodeAfter&&f.nodeAfter.sameMarkup(a.content.firstChild))c.setSelection(new $J(f));else{let t=c.mapping.map(s);c.mapping.maps[c.mapping.maps.length-1].forEach((e,n,r,i)=>t=i),c.setSelection(aZ(e,f,c.doc.resolve(t)))}e.focus(),e.dispatch(c.setMeta(`uiEvent`,`drop`))}AZ.focus=e=>{e.input.lastFocus=Date.now(),e.focused||(e.domObserver.stop(),e.dom.classList.add(`ProseMirror-focused`),e.domObserver.start(),e.focused=!0,setTimeout(()=>{e.docView&&e.hasFocus()&&!e.domObserver.currentSelection.eq(e.domSelectionRange())&&QX(e)},20))},AZ.blur=(e,t)=>{let n=t;e.focused&&=(e.domObserver.stop(),e.dom.classList.remove(`ProseMirror-focused`),e.domObserver.start(),n.relatedTarget&&e.dom.contains(n.relatedTarget)&&e.domObserver.currentSelection.clear(),!1)},AZ.beforeinput=(e,t)=>{if(fX&&t.inputType==`deleteContentBackward`){e.domObserver.flushSoon();let{domChangeCount:t}=e.input;setTimeout(()=>{if(e.input.domChangeCount!=t||(e.dom.blur(),e.focus(),e.someProp(`handleKeyDown`,t=>t(e,YY(8,`Backspace`)))))return;let{$cursor:n}=e.state.selection;n&&n.pos>0&&e.dispatch(e.state.tr.delete(n.pos-1,n.pos).scrollIntoView())},50)}};for(let e in jZ)AZ[e]=jZ[e];function ZZ(e,t){if(e==t)return!0;for(let n in e)if(e[n]!==t[n])return!1;for(let n in t)if(!(n in e))return!1;return!0}var QZ=class e{constructor(e,t){this.toDOM=e,this.spec=t||nQ,this.side=this.spec.side||0}map(e,t,n,r){let{pos:i,deleted:a}=e.mapResult(t.from+r,this.side<0?-1:1);return a?null:new eQ(i-n,i-n,this)}valid(){return!0}eq(t){return this==t||t instanceof e&&(this.spec.key&&this.spec.key==t.spec.key||this.toDOM==t.toDOM&&ZZ(this.spec,t.spec))}destroy(e){this.spec.destroy&&this.spec.destroy(e)}},$Z=class e{constructor(e,t){this.attrs=e,this.spec=t||nQ}map(e,t,n,r){let i=e.map(t.from+r,this.spec.inclusiveStart?-1:1)-n,a=e.map(t.to+r,this.spec.inclusiveEnd?1:-1)-n;return i>=a?null:new eQ(i,a,this)}valid(e,t){return t.from<t.to}eq(t){return this==t||t instanceof e&&ZZ(this.attrs,t.attrs)&&ZZ(this.spec,t.spec)}static is(t){return t.type instanceof e}destroy(){}},GNe=class e{constructor(e,t){this.attrs=e,this.spec=t||nQ}map(e,t,n,r){let i=e.mapResult(t.from+r,1);if(i.deleted)return null;let a=e.mapResult(t.to+r,-1);return a.deleted||a.pos<=i.pos?null:new eQ(i.pos-n,a.pos-n,this)}valid(e,t){let{index:n,offset:r}=e.content.findIndex(t.from),i;return r==t.from&&!(i=e.child(n)).isText&&r+i.nodeSize==t.to}eq(t){return this==t||t instanceof e&&ZZ(this.attrs,t.attrs)&&ZZ(this.spec,t.spec)}destroy(){}},eQ=class e{constructor(e,t,n){this.from=e,this.to=t,this.type=n}copy(t,n){return new e(t,n,this.type)}eq(e,t=0){return this.type.eq(e.type)&&this.from+t==e.from&&this.to+t==e.to}map(e,t,n){return this.type.map(e,this,t,n)}static widget(t,n,r){return new e(t,t,new QZ(n,r))}static inline(t,n,r,i){return new e(t,n,new $Z(r,i))}static node(t,n,r,i){return new e(t,n,new GNe(r,i))}get spec(){return this.type.spec}get inline(){return this.type instanceof $Z}get widget(){return this.type instanceof QZ}},tQ=[],nQ={},rQ=class e{constructor(e,t){this.local=e.length?e:tQ,this.children=t.length?t:tQ}static create(e,t){return t.length?lQ(t,e,0,nQ):iQ}find(e,t,n){let r=[];return this.findInner(e??0,t??1e9,r,0,n),r}findInner(e,t,n,r,i){for(let a=0;a<this.local.length;a++){let o=this.local[a];o.from<=t&&o.to>=e&&(!i||i(o.spec))&&n.push(o.copy(o.from+r,o.to+r))}for(let a=0;a<this.children.length;a+=3)if(this.children[a]<t&&this.children[a+1]>e){let o=this.children[a]+1;this.children[a+2].findInner(e-o,t-o,n,r+o,i)}}map(e,t,n){return this==iQ||e.maps.length==0?this:this.mapInner(e,t,0,0,n||nQ)}mapInner(t,n,r,i,a){let o;for(let e=0;e<this.local.length;e++){let s=this.local[e].map(t,r,i);s&&s.type.valid(n,s)?(o||=[]).push(s):a.onRemove&&a.onRemove(this.local[e].spec)}return this.children.length?KNe(this.children,o||[],t,n,r,i,a):o?new e(o.sort(uQ),tQ):iQ}add(t,n){return n.length?this==iQ?e.create(t,n):this.addInner(t,n,0):this}addInner(t,n,r){let i,a=0;t.forEach((e,t)=>{let o=t+r,s;if(s=sQ(n,e,o)){for(i||=this.children.slice();a<i.length&&i[a]<t;)a+=3;i[a]==t?i[a+2]=i[a+2].addInner(e,s,o+1):i.splice(a,0,t,t+e.nodeSize,lQ(s,e,o+1,nQ)),a+=3}});let o=oQ(a?cQ(n):n,-r);for(let e=0;e<o.length;e++)o[e].type.valid(t,o[e])||o.splice(e--,1);return new e(o.length?this.local.concat(o).sort(uQ):this.local,i||this.children)}remove(e){return e.length==0||this==iQ?this:this.removeInner(e,0)}removeInner(t,n){let r=this.children,i=this.local;for(let e=0;e<r.length;e+=3){let i,a=r[e]+n,o=r[e+1]+n;for(let e=0,n;e<t.length;e++)(n=t[e])&&n.from>a&&n.to<o&&(t[e]=null,(i||=[]).push(n));if(!i)continue;r==this.children&&(r=this.children.slice());let s=r[e+2].removeInner(i,a+1);s==iQ?(r.splice(e,3),e-=3):r[e+2]=s}if(i.length){for(let e=0,r;e<t.length;e++)if(r=t[e])for(let e=0;e<i.length;e++)i[e].eq(r,n)&&(i==this.local&&(i=this.local.slice()),i.splice(e--,1))}return r==this.children&&i==this.local?this:i.length||r.length?new e(i,r):iQ}forChild(t,n){if(this==iQ)return this;if(n.isLeaf)return e.empty;let r,i;for(let e=0;e<this.children.length;e+=3)if(this.children[e]>=t){this.children[e]==t&&(r=this.children[e+2]);break}let a=t+1,o=a+n.content.size;for(let e=0;e<this.local.length;e++){let t=this.local[e];if(t.from<o&&t.to>a&&t.type instanceof $Z){let e=Math.max(a,t.from)-a,n=Math.min(o,t.to)-a;e<n&&(i||=[]).push(t.copy(e,n))}}if(i){let t=new e(i.sort(uQ),tQ);return r?new aQ([t,r]):t}return r||iQ}eq(t){if(this==t)return!0;if(!(t instanceof e)||this.local.length!=t.local.length||this.children.length!=t.children.length)return!1;for(let e=0;e<this.local.length;e++)if(!this.local[e].eq(t.local[e]))return!1;for(let e=0;e<this.children.length;e+=3)if(this.children[e]!=t.children[e]||this.children[e+1]!=t.children[e+1]||!this.children[e+2].eq(t.children[e+2]))return!1;return!0}locals(e){return dQ(this.localsInner(e))}localsInner(e){if(this==iQ)return tQ;if(e.inlineContent||!this.local.some($Z.is))return this.local;let t=[];for(let e=0;e<this.local.length;e++)this.local[e].type instanceof $Z||t.push(this.local[e]);return t}forEachSet(e){e(this)}};rQ.empty=new rQ([],[]),rQ.removeOverlap=dQ;var iQ=rQ.empty,aQ=class e{constructor(e){this.members=e}map(t,n){let r=this.members.map(e=>e.map(t,n,nQ));return e.from(r)}forChild(t,n){if(n.isLeaf)return rQ.empty;let r=[];for(let i=0;i<this.members.length;i++){let a=this.members[i].forChild(t,n);a!=iQ&&(a instanceof e?r=r.concat(a.members):r.push(a))}return e.from(r)}eq(t){if(!(t instanceof e)||t.members.length!=this.members.length)return!1;for(let e=0;e<this.members.length;e++)if(!this.members[e].eq(t.members[e]))return!1;return!0}locals(e){let t,n=!0;for(let r=0;r<this.members.length;r++){let i=this.members[r].localsInner(e);if(i.length)if(!t)t=i;else{n&&=(t=t.slice(),!1);for(let e=0;e<i.length;e++)t.push(i[e])}}return t?dQ(n?t:t.sort(uQ)):tQ}static from(t){switch(t.length){case 0:return iQ;case 1:return t[0];default:return new e(t.every(e=>e instanceof rQ)?t:t.reduce((e,t)=>e.concat(t instanceof rQ?t:t.members),[]))}}forEachSet(e){for(let t=0;t<this.members.length;t++)this.members[t].forEachSet(e)}};function KNe(e,t,n,r,i,a,o){let s=e.slice();for(let e=0,t=a;e<n.maps.length;e++){let r=0;n.maps[e].forEach((e,n,i,a)=>{let o=a-i-(n-e);for(let i=0;i<s.length;i+=3){let a=s[i+1];if(a<0||e>a+t-r)continue;let c=s[i]+t-r;n>=c?s[i+1]=e<=c?-2:-1:e>=t&&o&&(s[i]+=o,s[i+1]+=o)}r+=o}),t=n.maps[e].map(t,-1)}let c=!1;for(let t=0;t<s.length;t+=3)if(s[t+1]<0){if(s[t+1]==-2){c=!0,s[t+1]=-1;continue}let l=n.map(e[t]+a),u=l-i;if(u<0||u>=r.content.size){c=!0;continue}let d=n.map(e[t+1]+a,-1)-i,{index:f,offset:p}=r.content.findIndex(u),m=r.maybeChild(f);if(m&&p==u&&p+m.nodeSize==d){let r=s[t+2].mapInner(n,m,l+1,e[t]+a+1,o);r==iQ?(s[t+1]=-2,c=!0):(s[t]=u,s[t+1]=d,s[t+2]=r)}else c=!0}if(c){let c=lQ(qNe(s,e,t,n,i,a,o),r,0,o);t=c.local;for(let e=0;e<s.length;e+=3)s[e+1]<0&&(s.splice(e,3),e-=3);for(let e=0,t=0;e<c.children.length;e+=3){let n=c.children[e];for(;t<s.length&&s[t]<n;)t+=3;s.splice(t,0,c.children[e],c.children[e+1],c.children[e+2])}}return new rQ(t.sort(uQ),s)}function oQ(e,t){if(!t||!e.length)return e;let n=[];for(let r=0;r<e.length;r++){let i=e[r];n.push(new eQ(i.from+t,i.to+t,i.type))}return n}function qNe(e,t,n,r,i,a,o){function s(e,t){for(let a=0;a<e.local.length;a++){let s=e.local[a].map(r,i,t);s?n.push(s):o.onRemove&&o.onRemove(e.local[a].spec)}for(let n=0;n<e.children.length;n+=3)s(e.children[n+2],e.children[n]+t+1)}for(let n=0;n<e.length;n+=3)e[n+1]==-1&&s(e[n+2],t[n]+a+1);return n}function sQ(e,t,n){if(t.isLeaf)return null;let r=n+t.nodeSize,i=null;for(let t=0,a;t<e.length;t++)(a=e[t])&&a.from>n&&a.to<r&&((i||=[]).push(a),e[t]=null);return i}function cQ(e){let t=[];for(let n=0;n<e.length;n++)e[n]!=null&&t.push(e[n]);return t}function lQ(e,t,n,r){let i=[],a=!1;t.forEach((t,o)=>{let s=sQ(e,t,o+n);if(s){a=!0;let e=lQ(s,t,n+o+1,r);e!=iQ&&i.push(o,o+t.nodeSize,e)}});let o=oQ(a?cQ(e):e,-n).sort(uQ);for(let e=0;e<o.length;e++)o[e].type.valid(t,o[e])||(r.onRemove&&r.onRemove(o[e].spec),o.splice(e--,1));return o.length||i.length?new rQ(o,i):iQ}function uQ(e,t){return e.from-t.from||e.to-t.to}function dQ(e){let t=e;for(let n=0;n<t.length-1;n++){let r=t[n];if(r.from!=r.to)for(let i=n+1;i<t.length;i++){let a=t[i];if(a.from==r.from){a.to!=r.to&&(t==e&&(t=e.slice()),t[i]=a.copy(a.from,r.to),fQ(t,i+1,a.copy(r.to,a.to)));continue}else{a.from<r.to&&(t==e&&(t=e.slice()),t[n]=r.copy(r.from,a.from),fQ(t,i,r.copy(a.from,r.to)));break}}}return t}function fQ(e,t,n){for(;t<e.length&&uQ(n,e[t])>0;)t++;e.splice(t,0,n)}function pQ(e){let t=[];return e.someProp(`decorations`,n=>{let r=n(e.state);r&&r!=iQ&&t.push(r)}),e.cursorWrapper&&t.push(rQ.create(e.state.doc,[e.cursorWrapper.deco])),aQ.from(t)}var JNe={childList:!0,characterData:!0,characterDataOldValue:!0,attributes:!0,attributeOldValue:!0,subtree:!0},YNe=nX&&rX<=11,XNe=class{constructor(){this.anchorNode=null,this.anchorOffset=0,this.focusNode=null,this.focusOffset=0}set(e){this.anchorNode=e.anchorNode,this.anchorOffset=e.anchorOffset,this.focusNode=e.focusNode,this.focusOffset=e.focusOffset}clear(){this.anchorNode=this.focusNode=null}eq(e){return e.anchorNode==this.anchorNode&&e.anchorOffset==this.anchorOffset&&e.focusNode==this.focusNode&&e.focusOffset==this.focusOffset}},ZNe=class{constructor(e,t){this.view=e,this.handleDOMChange=t,this.queue=[],this.flushingSoon=-1,this.observer=null,this.currentSelection=new XNe,this.onCharData=null,this.suppressingSelectionUpdates=!1,this.lastChangedTextNode=null,this.observer=window.MutationObserver&&new window.MutationObserver(t=>{for(let e=0;e<t.length;e++)this.queue.push(t[e]);nX&&rX<=11&&t.some(e=>e.type==`childList`&&e.removedNodes.length||e.type==`characterData`&&e.oldValue.length>e.target.nodeValue.length)?this.flushSoon():cX&&e.composing&&t.some(e=>e.type==`childList`&&e.target.nodeName==`TR`)?(e.input.badSafariComposition=!0,this.flushSoon()):this.flush()}),YNe&&(this.onCharData=e=>{this.queue.push({target:e.target,type:`characterData`,oldValue:e.prevValue}),this.flushSoon()}),this.onSelectionChange=this.onSelectionChange.bind(this)}flushSoon(){this.flushingSoon<0&&(this.flushingSoon=window.setTimeout(()=>{this.flushingSoon=-1,this.flush()},20))}forceFlush(){this.flushingSoon>-1&&(window.clearTimeout(this.flushingSoon),this.flushingSoon=-1,this.flush())}start(){this.observer&&(this.observer.takeRecords(),this.observer.observe(this.view.dom,JNe)),this.onCharData&&this.view.dom.addEventListener(`DOMCharacterDataModified`,this.onCharData),this.connectSelection()}stop(){if(this.observer){let e=this.observer.takeRecords();if(e.length){for(let t=0;t<e.length;t++)this.queue.push(e[t]);window.setTimeout(()=>this.flush(),20)}this.observer.disconnect()}this.onCharData&&this.view.dom.removeEventListener(`DOMCharacterDataModified`,this.onCharData),this.disconnectSelection()}connectSelection(){this.view.dom.ownerDocument.addEventListener(`selectionchange`,this.onSelectionChange)}disconnectSelection(){this.view.dom.ownerDocument.removeEventListener(`selectionchange`,this.onSelectionChange)}suppressSelectionUpdates(){this.suppressingSelectionUpdates=!0,setTimeout(()=>this.suppressingSelectionUpdates=!1,50)}onSelectionChange(){if(oZ(this.view)){if(this.suppressingSelectionUpdates)return QX(this.view);if(nX&&rX<=11&&!this.view.state.selection.empty){let e=this.view.domSelectionRange();if(e.focusNode&&WY(e.focusNode,e.focusOffset,e.anchorNode,e.anchorOffset))return this.flushSoon()}this.flush()}}setCurSelection(){this.currentSelection.set(this.view.domSelectionRange())}ignoreSelectionChange(e){if(!e.focusNode)return!0;let t=new Set,n;for(let n=e.focusNode;n;n=VY(n))t.add(n);for(let r=e.anchorNode;r;r=VY(r))if(t.has(r)){n=r;break}let r=n&&this.view.docView.nearestDesc(n);if(r&&r.ignoreMutation({type:`selection`,target:n.nodeType==3?n.parentNode:n}))return this.setCurSelection(),!0}pendingRecords(){if(this.observer)for(let e of this.observer.takeRecords())this.queue.push(e);return this.queue}flush(){let{view:e}=this;if(!e.docView||this.flushingSoon>-1)return;let t=this.pendingRecords();t.length&&(this.queue=[]);let n=e.domSelectionRange(),r=!this.suppressingSelectionUpdates&&!this.currentSelection.eq(n)&&oZ(e)&&!this.ignoreSelectionChange(n),i=-1,a=-1,o=!1,s=[];if(e.editable)for(let e=0;e<t.length;e++){let n=this.registerMutation(t[e],s);n&&(i=i<0?n.from:Math.min(n.from,i),a=a<0?n.to:Math.max(n.to,a),n.typeOver&&(o=!0))}if(s.some(e=>e.nodeName==`BR`)&&(e.input.lastKeyCode==8||e.input.lastKeyCode==46||oX&&(e.composing||e.input.compositionEndedAt>Date.now()-50)&&t.some(e=>e.type==`childList`&&e.removedNodes.length))){for(let e of s)if(e.nodeName==`BR`&&e.parentNode){let t=e.nextSibling;for(;t&&t.nodeType==1;){if(t.contentEditable==`false`){e.parentNode.removeChild(e);break}t=t.firstChild}}}else if(iX&&s.length){let t=s.filter(e=>e.nodeName==`BR`);if(t.length==2){let[e,n]=t;e.parentNode&&e.parentNode.parentNode==n.parentNode?n.remove():e.remove()}else{let{focusNode:n}=this.currentSelection;for(let r of t){let t=r.parentNode;t&&t.nodeName==`LI`&&(!n||ePe(e,n)!=t)&&r.remove()}}}let c=null;i<0&&r&&e.input.lastFocus>Date.now()-200&&Math.max(e.input.lastTouch,e.input.lastClick.time)<Date.now()-300&&JY(n)&&(c=XX(e))&&c.eq(JJ.near(e.state.doc.resolve(0),1))?(e.input.lastFocus=0,QX(e),this.currentSelection.set(n),e.scrollToSelection()):(i>-1||r)&&(i>-1&&(e.docView.markDirty(i,a),QNe(e)),e.input.badSafariComposition&&(e.input.badSafariComposition=!1,tPe(e,s)),this.handleDOMChange(i,a,o,s),e.docView&&e.docView.dirty?e.updateState(e.state):this.currentSelection.eq(n)||QX(e),this.currentSelection.set(n))}registerMutation(e,t){if(t.indexOf(e.target)>-1)return null;let n=this.view.docView.nearestDesc(e.target);if(e.type==`attributes`&&(n==this.view.docView||e.attributeName==`contenteditable`||e.attributeName==`style`&&!e.oldValue&&!e.target.getAttribute(`style`))||!n||n.ignoreMutation(e))return null;if(e.type==`childList`){for(let n=0;n<e.addedNodes.length;n++){let r=e.addedNodes[n];t.push(r),r.nodeType==3&&(this.lastChangedTextNode=r)}if(n.contentDOM&&n.contentDOM!=n.dom&&!n.contentDOM.contains(e.target))return{from:n.posBefore,to:n.posAfter};let r=e.previousSibling,i=e.nextSibling;if(nX&&rX<=11&&e.addedNodes.length)for(let t=0;t<e.addedNodes.length;t++){let{previousSibling:n,nextSibling:a}=e.addedNodes[t];(!n||Array.prototype.indexOf.call(e.addedNodes,n)<0)&&(r=n),(!a||Array.prototype.indexOf.call(e.addedNodes,a)<0)&&(i=a)}let a=r&&r.parentNode==e.target?BY(r)+1:0,o=n.localPosFromDOM(e.target,a,-1),s=i&&i.parentNode==e.target?BY(i):e.target.childNodes.length;return{from:o,to:n.localPosFromDOM(e.target,s,1)}}else if(e.type==`attributes`)return{from:n.posAtStart-n.border,to:n.posAtEnd+n.border};else return this.lastChangedTextNode=e.target,{from:n.posAtStart,to:n.posAtEnd,typeOver:e.target.nodeValue==e.oldValue}}},mQ=new WeakMap,hQ=!1;function QNe(e){if(!mQ.has(e)&&(mQ.set(e,null),[`normal`,`nowrap`,`pre-line`].indexOf(getComputedStyle(e.dom).whiteSpace)!==-1)){if(e.requiresGeckoHackNode=iX,hQ)return;console.warn(`ProseMirror expects the CSS white-space property to be set, preferably to 'pre-wrap'. It is recommended to load style/prosemirror.css from the prosemirror-view package.`),hQ=!0}}function gQ(e,t){let n=t.startContainer,r=t.startOffset,i=t.endContainer,a=t.endOffset,o=e.domAtPos(e.state.selection.anchor);return WY(o.node,o.offset,i,a)&&([n,r,i,a]=[i,a,n,r]),{anchorNode:n,anchorOffset:r,focusNode:i,focusOffset:a}}function $Ne(e,t){if(t.getComposedRanges){let n=t.getComposedRanges(e.root)[0];if(n)return gQ(e,n)}let n;function r(e){e.preventDefault(),e.stopImmediatePropagation(),n=e.getTargetRanges()[0]}return e.dom.addEventListener(`beforeinput`,r,!0),document.execCommand(`indent`),e.dom.removeEventListener(`beforeinput`,r,!0),n?gQ(e,n):null}function ePe(e,t){for(let n=t.parentNode;n&&n!=e.dom;n=n.parentNode){let t=e.docView.nearestDesc(n,!0);if(t&&t.node.isBlock)return n}return null}function tPe(e,t){let{focusNode:n,focusOffset:r}=e.domSelectionRange();for(let i of t)if(i.parentNode?.nodeName==`TR`){let t=i.nextSibling;for(;t&&t.nodeName!=`TD`&&t.nodeName!=`TH`;)t=t.nextSibling;if(t){let a=t;for(;;){let e=a.firstChild;if(!e||e.nodeType!=1||e.contentEditable==`false`||/^(BR|IMG)$/.test(e.nodeName))break;a=e}a.insertBefore(i,a.firstChild),n==i&&e.domSelection().collapse(i,r)}else i.parentNode.removeChild(i)}}function nPe(e,t,n,r){let{node:i,fromOffset:a,toOffset:o,from:s,to:c}=e.docView.parseRange(t,n),l=e.domSelectionRange(),u,d=l.anchorNode;if(d&&e.dom.contains(d.nodeType==1?d:d.parentNode)&&(u=[{node:d,offset:l.anchorOffset}],JY(l)||u.push({node:l.focusNode,offset:l.focusOffset})),oX&&e.input.lastKeyCode===8)for(let e=o;e>a;e--){let t=i.childNodes[e-1],n=t.pmViewDesc;if(t.nodeName==`BR`&&!n){o=e;break}if(!n||n.size)break}let f=e.state.doc,p=e.someProp(`domParser`)||Vq.fromSchema(e.state.schema),m=f.resolve(s),h=null,g=p.parse(i,{topNode:m.parent,topMatch:m.parent.contentMatchAt(m.index()),topOpen:!0,from:a,to:o,preserveWhitespace:m.parent.type.whitespace==`pre`?`full`:!0,findPositions:u,ruleFromNode:rPe(r),context:m});if(u&&u[0].pos!=null){let e=u[0].pos,t=u[1]&&u[1].pos;t??=e,h={anchor:e+s,head:t+s}}return{doc:g,sel:h,from:s,to:c}}var rPe=e=>t=>{let n=t.pmViewDesc;if(n)return n.parseRule(e);if(t.nodeName==`BR`&&t.parentNode){if(cX&&/^(ul|ol)$/i.test(t.parentNode.nodeName)){let e=document.createElement(`div`);return e.appendChild(document.createElement(`li`)),{skip:e}}else if(t.parentNode.lastChild==t||cX&&/^(tr|table)$/i.test(t.parentNode.nodeName))return{ignore:!0}}else if(t.nodeName==`IMG`&&t.getAttribute(`mark-placeholder`))return{ignore:!0};return null},iPe=/^(a|abbr|acronym|b|bd[io]|big|br|button|cite|code|data(list)?|del|dfn|em|i|img|ins|kbd|label|map|mark|meter|output|q|ruby|s|samp|small|span|strong|su[bp]|time|u|tt|var)$/i;function aPe(e,t,n,r,i){let a=e.input.compositionPendingChanges||(e.composing?e.input.compositionID:0);if(e.input.compositionPendingChanges=0,t<0){let t=e.input.lastSelectionTime>Date.now()-50?e.input.lastSelectionOrigin:null,n=XX(e,t);if(n&&!e.state.selection.eq(n)){if(oX&&fX&&e.input.lastKeyCode===13&&Date.now()-100<e.input.lastKeyCodeTime&&e.someProp(`handleKeyDown`,t=>t(e,YY(13,`Enter`))))return;let r=e.state.tr.setSelection(n);t==`pointer`?r.setMeta(`pointer`,!0):t==`key`&&r.scrollIntoView(),a&&r.setMeta(`composition`,a),e.dispatch(r)}return}let o=e.state.doc.resolve(t),s=o.sharedDepth(n);t=o.before(s+1),n=e.state.doc.resolve(n).after(s+1);let c=e.state.selection,l=nPe(e,t,n,i),u=e.state.doc,d=u.slice(l.from,l.to),f,p;e.input.lastKeyCode===8&&Date.now()-100<e.input.lastKeyCodeTime?(f=e.state.selection.to,p=`end`):(f=e.state.selection.from,p=`start`),e.input.lastKeyCode=null;let m=cPe(d.content,l.doc.content,l.from,f,p);if(m&&e.input.domChangeCount++,(lX&&e.input.lastIOSEnter>Date.now()-225||fX)&&i.some(e=>e.nodeType==1&&!iPe.test(e.nodeName))&&(!m||m.endA>=m.endB)&&e.someProp(`handleKeyDown`,t=>t(e,YY(13,`Enter`)))){e.input.lastIOSEnter=0;return}if(!m)if(r&&c instanceof ZJ&&!c.empty&&c.$head.sameParent(c.$anchor)&&!e.composing&&!(l.sel&&l.sel.anchor!=l.sel.head))m={start:c.from,endA:c.to,endB:c.to};else{if(l.sel){let t=_Q(e,e.state.doc,l.sel);if(t&&!t.eq(e.state.selection)){let n=e.state.tr.setSelection(t);a&&n.setMeta(`composition`,a),e.dispatch(n)}}return}e.state.selection.from<e.state.selection.to&&m.start==m.endB&&e.state.selection instanceof ZJ&&(m.start>e.state.selection.from&&m.start<=e.state.selection.from+2&&e.state.selection.from>=l.from?m.start=e.state.selection.from:m.endA<e.state.selection.to&&m.endA>=e.state.selection.to-2&&e.state.selection.to<=l.to&&(m.endB+=e.state.selection.to-m.endA,m.endA=e.state.selection.to)),nX&&rX<=11&&m.endB==m.start+1&&m.endA==m.start&&m.start>l.from&&l.doc.textBetween(m.start-l.from-1,m.start-l.from+1)==` \xA0`&&(m.start--,m.endA--,m.endB--);let h=l.doc.resolveNoCache(m.start-l.from),g=l.doc.resolveNoCache(m.endB-l.from),_=u.resolve(m.start),v=h.sameParent(g)&&h.parent.inlineContent&&_.end()>=m.endA;if((lX&&e.input.lastIOSEnter>Date.now()-225&&(!v||i.some(e=>e.nodeName==`DIV`||e.nodeName==`P`))||!v&&h.pos<l.doc.content.size&&(!h.sameParent(g)||!h.parent.inlineContent)&&h.pos<g.pos&&!/\S/.test(l.doc.textBetween(h.pos,g.pos,``,``)))&&e.someProp(`handleKeyDown`,t=>t(e,YY(13,`Enter`)))){e.input.lastIOSEnter=0;return}if(e.state.selection.anchor>m.start&&sPe(u,m.start,m.endA,h,g)&&e.someProp(`handleKeyDown`,t=>t(e,YY(8,`Backspace`)))){fX&&oX&&e.domObserver.suppressSelectionUpdates();return}oX&&m.endB==m.start&&(e.input.lastChromeDelete=Date.now()),fX&&!v&&h.start()!=g.start()&&g.parentOffset==0&&h.depth==g.depth&&l.sel&&l.sel.anchor==l.sel.head&&l.sel.head==m.endA&&(m.endB-=2,g=l.doc.resolveNoCache(m.endB-l.from),setTimeout(()=>{e.someProp(`handleKeyDown`,function(t){return t(e,YY(13,`Enter`))})},20));let y=m.start,b=m.endA,x=t=>{let n=t||e.state.tr.replace(y,b,l.doc.slice(m.start-l.from,m.endB-l.from));if(l.sel){let t=_Q(e,n.doc,l.sel);t&&!(oX&&e.composing&&t.empty&&(m.start!=m.endB||e.input.lastChromeDelete<Date.now()-100)&&(t.head==y||t.head==n.mapping.map(b)-1)||nX&&t.empty&&t.head==y)&&n.setSelection(t)}return a&&n.setMeta(`composition`,a),n.scrollIntoView()},S;if(v)if(h.pos==g.pos){nX&&rX<=11&&h.parentOffset==0&&(e.domObserver.suppressSelectionUpdates(),setTimeout(()=>QX(e),20));let t=x(e.state.tr.delete(y,b)),n=u.resolve(m.start).marksAcross(u.resolve(m.endA));n&&t.ensureMarks(n),e.dispatch(t)}else if(m.endA==m.endB&&(S=oPe(h.parent.content.cut(h.parentOffset,g.parentOffset),_.parent.content.cut(_.parentOffset,m.endA-_.start())))){let t=x(e.state.tr);S.type==`add`?t.addMark(y,b,S.mark):t.removeMark(y,b,S.mark),e.dispatch(t)}else if(h.parent.child(h.index()).isText&&h.index()==g.index()-+!g.textOffset){let t=h.parent.textBetween(h.parentOffset,g.parentOffset),n=()=>x(e.state.tr.insertText(t,y,b));e.someProp(`handleTextInput`,r=>r(e,y,b,t,n))||e.dispatch(n())}else e.dispatch(x());else e.dispatch(x())}function _Q(e,t,n){return Math.max(n.anchor,n.head)>t.content.size?null:aZ(e,t.resolve(n.anchor),t.resolve(n.head))}function oPe(e,t){let n=e.firstChild.marks,r=t.firstChild.marks,i=n,a=r,o,s,c;for(let e=0;e<r.length;e++)i=r[e].removeFromSet(i);for(let e=0;e<n.length;e++)a=n[e].removeFromSet(a);if(i.length==1&&a.length==0)s=i[0],o=`add`,c=e=>e.mark(s.addToSet(e.marks));else if(i.length==0&&a.length==1)s=a[0],o=`remove`,c=e=>e.mark(s.removeFromSet(e.marks));else return null;let l=[];for(let e=0;e<t.childCount;e++)l.push(c(t.child(e)));if(oq.from(l).eq(e))return{mark:s,type:o}}function sPe(e,t,n,r,i){if(n-t<=i.pos-r.pos||vQ(r,!0,!1)<i.pos)return!1;let a=e.resolve(t);if(!r.parent.isTextblock){let e=a.nodeAfter;return e!=null&&n==t+e.nodeSize}if(a.parentOffset<a.parent.content.size||!a.parent.isTextblock)return!1;let o=e.resolve(vQ(a,!0,!0));return!o.parent.isTextblock||o.pos>n||vQ(o,!0,!1)<n?!1:r.parent.content.cut(r.parentOffset).eq(o.parent.content)}function vQ(e,t,n){let r=e.depth,i=t?e.end():e.pos;for(;r>0&&(t||e.indexAfter(r)==e.node(r).childCount);)r--,i++,t=!1;if(n){let t=e.node(r).maybeChild(e.indexAfter(r));for(;t&&!t.isLeaf;)t=t.firstChild,i++}return i}function cPe(e,t,n,r,i){let a=e.findDiffStart(t,n),o=n+e.size,s=n+t.size;if(a==null)return null;let{a:c,b:l}=e.findDiffEnd(t,o,s);if(i==`end`){let e=Math.max(0,a-Math.min(c,l));r-=c+e-a}if(c<a&&o<s){let e=r<=a&&r>=c?a-r:0;a-=e,l=a+(l-c),c=a}else if(l<a){let e=r<=a&&r>=l?a-r:0;a-=e,c=a+(c-l),l=a}return{start:a,endA:c,endB:l}}var yQ=class{constructor(e,t){this._root=null,this.focused=!1,this.trackWrites=null,this.mounted=!1,this.markCursor=null,this.cursorWrapper=null,this.lastSelectedViewDesc=void 0,this.input=new CNe,this.prevDirectPlugins=[],this.pluginViews=[],this.requiresGeckoHackNode=!1,this.dragging=null,this._props=t,this.state=t.state,this.directPlugins=t.plugins||[],this.directPlugins.forEach(wQ),this.dispatch=this.dispatch.bind(this),this.dom=e&&e.mount||document.createElement(`div`),e&&(e.appendChild?e.appendChild(this.dom):typeof e==`function`?e(this.dom):e.mount&&(this.mounted=!0)),this.editable=SQ(this),xQ(this),this.nodeViews=CQ(this),this.docView=zX(this.state.doc,bQ(this),pQ(this),this.dom,this),this.domObserver=new ZNe(this,(e,t,n,r)=>aPe(this,e,t,n,r)),this.domObserver.start(),wNe(this),this.updatePluginViews()}get composing(){return this.input.composing}get props(){if(this._props.state!=this.state){let e=this._props;this._props={};for(let t in e)this._props[t]=e[t];this._props.state=this.state}return this._props}update(e){e.handleDOMEvents!=this._props.handleDOMEvents&&NZ(this);let t=this._props;this._props=e,e.plugins&&(e.plugins.forEach(wQ),this.directPlugins=e.plugins),this.updateStateInner(e.state,t)}setProps(e){let t={};for(let e in this._props)t[e]=this._props[e];t.state=this.state;for(let n in e)t[n]=e[n];this.update(t)}updateState(e){this.updateStateInner(e,this._props)}updateStateInner(e,t){let n=this.state,r=!1,i=!1;e.storedMarks&&this.composing&&(WZ(this),i=!0),this.state=e;let a=n.plugins!=e.plugins||this._props.plugins!=t.plugins;if(a||this._props.plugins!=t.plugins||this._props.nodeViews!=t.nodeViews){let e=CQ(this);uPe(e,this.nodeViews)&&(this.nodeViews=e,r=!0)}(a||t.handleDOMEvents!=this._props.handleDOMEvents)&&NZ(this),this.editable=SQ(this),xQ(this);let o=pQ(this),s=bQ(this),c=n.plugins!=e.plugins&&!n.doc.eq(e.doc)?`reset`:e.scrollToSelection>n.scrollToSelection?`to selection`:`preserve`,l=r||!this.docView.matchesNode(e.doc,s,o);(l||!e.selection.eq(n.selection))&&(i=!0);let u=c==`preserve`&&i&&this.dom.style.overflowAnchor==null&&LMe(this);if(i){this.domObserver.stop();let t=l&&(nX||oX)&&!this.composing&&!n.selection.empty&&!e.selection.empty&&lPe(n.selection,e.selection);if(l){let n=oX?this.trackWrites=this.domSelectionRange().focusNode:null;this.composing&&(this.input.compositionNode=zNe(this)),(r||!this.docView.update(e.doc,s,o,this))&&(this.docView.updateOuterDeco(s),this.docView.destroy(),this.docView=zX(e.doc,s,o,this.dom,this)),n&&(!this.trackWrites||!this.dom.contains(this.trackWrites))&&(t=!0)}let i=this.input.mouseDown;t||!(i&&this.domObserver.currentSelection.eq(this.domSelectionRange())&&cNe(this)&&i.delaySelUpdate())?QX(this,t):(rZ(this,e.selection),this.domObserver.setCurSelection()),this.domObserver.start()}this.updatePluginViews(n),this.dragging?.node&&!n.doc.eq(e.doc)&&this.updateDraggedNode(this.dragging,n),c==`reset`?this.dom.scrollTop=0:c==`to selection`?this.scrollToSelection():u&&RMe(u)}scrollToSelection(){let e=this.domSelectionRange().focusNode;if(!(!e||!this.dom.contains(e.nodeType==1?e:e.parentNode))&&!this.someProp(`handleScrollToSelection`,e=>e(this)))if(this.state.selection instanceof $J){let t=this.docView.domAfterPos(this.state.selection.from);t.nodeType==1&&hX(this,t.getBoundingClientRect(),e)}else hX(this,this.coordsAtPos(this.state.selection.head,1),e)}destroyPluginViews(){let e;for(;e=this.pluginViews.pop();)e.destroy&&e.destroy()}updatePluginViews(e){if(!e||e.plugins!=this.state.plugins||this.directPlugins!=this.prevDirectPlugins){this.prevDirectPlugins=this.directPlugins,this.destroyPluginViews();for(let e=0;e<this.directPlugins.length;e++){let t=this.directPlugins[e];t.spec.view&&this.pluginViews.push(t.spec.view(this))}for(let e=0;e<this.state.plugins.length;e++){let t=this.state.plugins[e];t.spec.view&&this.pluginViews.push(t.spec.view(this))}}else for(let t=0;t<this.pluginViews.length;t++){let n=this.pluginViews[t];n.update&&n.update(this,e)}}updateDraggedNode(e,t){let n=e.node,r=-1;if(n.from<this.state.doc.content.size&&this.state.doc.nodeAt(n.from)==n.node)r=n.from;else{let e=n.from+(this.state.doc.content.size-t.doc.content.size);(e>0&&e<this.state.doc.content.size&&this.state.doc.nodeAt(e))==n.node&&(r=e)}this.dragging=new YZ(e.slice,e.move,r<0?void 0:$J.create(this.state.doc,r))}someProp(e,t){let n=this._props&&this._props[e],r;if(n!=null&&(r=t?t(n):n))return r;for(let n=0;n<this.directPlugins.length;n++){let i=this.directPlugins[n].props[e];if(i!=null&&(r=t?t(i):i))return r}let i=this.state.plugins;if(i)for(let n=0;n<i.length;n++){let a=i[n].props[e];if(a!=null&&(r=t?t(a):a))return r}}hasFocus(){if(nX){let e=this.root.activeElement;if(e==this.dom)return!0;if(!e||!this.dom.contains(e))return!1;for(;e&&this.dom!=e&&this.dom.contains(e);){if(e.contentEditable==`false`)return!1;e=e.parentElement}return!0}return this.root.activeElement==this.dom}focus(){this.domObserver.stop(),this.editable&&zMe(this.dom),QX(this),this.domObserver.start()}get root(){let e=this._root;if(e==null){for(let e=this.dom.parentNode;e;e=e.parentNode)if(e.nodeType==9||e.nodeType==11&&e.host)return e.getSelection||(Object.getPrototypeOf(e).getSelection=()=>e.ownerDocument.getSelection()),this._root=e}return e||document}updateRoot(){this._root=null}posAtCoords(e){return WMe(this,e)}coordsAtPos(e,t=1){return wX(this,e,t)}domAtPos(e,t=0){return this.docView.domFromPos(e,t)}nodeDOM(e){let t=this.docView.descAt(e);return t?t.nodeDOM:null}posAtDOM(e,t,n=-1){let r=this.docView.posFromDOM(e,t,n);if(r==null)throw RangeError(`DOM position not inside the editor`);return r}endOfTextblock(e,t){return YMe(this,t||this.state,e)}pasteHTML(e,t){return qZ(this,``,e,!1,t||new ClipboardEvent(`paste`))}pasteText(e,t){return qZ(this,e,null,!0,t||new ClipboardEvent(`paste`))}serializeForClipboard(e){return bZ(this,e)}destroy(){this.docView&&(TNe(this),this.destroyPluginViews(),this.mounted?(this.docView.update(this.state.doc,[],pQ(this),this),this.dom.textContent=``):this.dom.parentNode&&this.dom.parentNode.removeChild(this.dom),this.docView.destroy(),this.docView=null,DMe())}get isDestroyed(){return this.docView==null}dispatchEvent(e){return DNe(this,e)}domSelectionRange(){let e=this.domSelection();return e?cX&&this.root.nodeType===11&&MMe(this.dom.ownerDocument)==this.dom&&$Ne(this,e)||e:{focusNode:null,focusOffset:0,anchorNode:null,anchorOffset:0}}domSelection(){return this.root.getSelection()}};yQ.prototype.dispatch=function(e){let t=this._props.dispatchTransaction;t?t.call(this,e):this.updateState(this.state.apply(e))};function bQ(e){let t=Object.create(null);return t.class=`ProseMirror`,t.contenteditable=String(e.editable),e.someProp(`attributes`,n=>{if(typeof n==`function`&&(n=n(e.state)),n)for(let e in n)e==`class`?t.class+=` `+n[e]:e==`style`?t.style=(t.style?t.style+`;`:``)+n[e]:!t[e]&&e!=`contenteditable`&&e!=`nodeName`&&(t[e]=String(n[e]))}),t.translate||=`no`,[eQ.node(0,e.state.doc.content.size,t)]}function xQ(e){if(e.markCursor){let t=document.createElement(`img`);t.className=`ProseMirror-separator`,t.setAttribute(`mark-placeholder`,`true`),t.setAttribute(`alt`,``),e.cursorWrapper={dom:t,deco:eQ.widget(e.state.selection.from,t,{raw:!0,marks:e.markCursor})}}else e.cursorWrapper=null}function SQ(e){return!e.someProp(`editable`,t=>t(e.state)===!1)}function lPe(e,t){let n=Math.min(e.$anchor.sharedDepth(e.head),t.$anchor.sharedDepth(t.head));return e.$anchor.start(n)!=t.$anchor.start(n)}function CQ(e){let t=Object.create(null);function n(e){for(let n in e)Object.prototype.hasOwnProperty.call(t,n)||(t[n]=e[n])}return e.someProp(`nodeViews`,n),e.someProp(`markViews`,n),t}function uPe(e,t){let n=0,r=0;for(let r in e){if(e[r]!=t[r])return!0;n++}for(let e in t)r++;return n!=r}function wQ(e){if(e.spec.state||e.spec.filterTransaction||e.spec.appendTransaction)throw RangeError(`Plugins passed directly to the view must not have a state component`)}for(var TQ={8:`Backspace`,9:`Tab`,10:`Enter`,12:`NumLock`,13:`Enter`,16:`Shift`,17:`Control`,18:`Alt`,20:`CapsLock`,27:`Escape`,32:` `,33:`PageUp`,34:`PageDown`,35:`End`,36:`Home`,37:`ArrowLeft`,38:`ArrowUp`,39:`ArrowRight`,40:`ArrowDown`,44:`PrintScreen`,45:`Insert`,46:`Delete`,59:`;`,61:`=`,91:`Meta`,92:`Meta`,106:`*`,107:`+`,108:`,`,109:`-`,110:`.`,111:`/`,144:`NumLock`,145:`ScrollLock`,160:`Shift`,161:`Shift`,162:`Control`,163:`Control`,164:`Alt`,165:`Alt`,173:`-`,186:`;`,187:`=`,188:`,`,189:`-`,190:`.`,191:`/`,192:"`",219:`[`,220:`\\`,221:`]`,222:`'`},EQ={48:`)`,49:`!`,50:`@`,51:`#`,52:`$`,53:`%`,54:`^`,55:`&`,56:`*`,57:`(`,59:`:`,61:`+`,173:`_`,186:`:`,187:`+`,188:`<`,189:`_`,190:`>`,191:`?`,192:`~`,219:`{`,220:`|`,221:`}`,222:`"`},dPe=typeof navigator<`u`&&/Mac/.test(navigator.platform),fPe=typeof navigator<`u`&&/MSIE \d|Trident\/(?:[7-9]|\d{2,})\..*rv:(\d+)/.exec(navigator.userAgent),DQ=0;DQ<10;DQ++)TQ[48+DQ]=TQ[96+DQ]=String(DQ);for(var DQ=1;DQ<=24;DQ++)TQ[DQ+111]=`F`+DQ;for(var DQ=65;DQ<=90;DQ++)TQ[DQ]=String.fromCharCode(DQ+32),EQ[DQ]=String.fromCharCode(DQ);for(var OQ in TQ)EQ.hasOwnProperty(OQ)||(EQ[OQ]=TQ[OQ]);function pPe(e){var t=!(dPe&&e.metaKey&&e.shiftKey&&!e.ctrlKey&&!e.altKey||fPe&&e.shiftKey&&e.key&&e.key.length==1||e.key==`Unidentified`)&&e.key||(e.shiftKey?EQ:TQ)[e.keyCode]||e.key||`Unidentified`;return t==`Esc`&&(t=`Escape`),t==`Del`&&(t=`Delete`),t==`Left`&&(t=`ArrowLeft`),t==`Up`&&(t=`ArrowUp`),t==`Right`&&(t=`ArrowRight`),t==`Down`&&(t=`ArrowDown`),t}var mPe=typeof navigator<`u`&&/Mac|iP(hone|[oa]d)/.test(navigator.platform),hPe=typeof navigator<`u`&&/Win/.test(navigator.platform);function gPe(e){let t=e.split(/-(?!$)/),n=t[t.length-1];n==`Space`&&(n=` `);let r,i,a,o;for(let e=0;e<t.length-1;e++){let n=t[e];if(/^(cmd|meta|m)$/i.test(n))o=!0;else if(/^a(lt)?$/i.test(n))r=!0;else if(/^(c|ctrl|control)$/i.test(n))i=!0;else if(/^s(hift)?$/i.test(n))a=!0;else if(/^mod$/i.test(n))mPe?o=!0:i=!0;else throw Error(`Unrecognized modifier name: `+n)}return r&&(n=`Alt-`+n),i&&(n=`Ctrl-`+n),o&&(n=`Meta-`+n),a&&(n=`Shift-`+n),n}function _Pe(e){let t=Object.create(null);for(let n in e)t[gPe(n)]=e[n];return t}function kQ(e,t,n=!0){return t.altKey&&(e=`Alt-`+e),t.ctrlKey&&(e=`Ctrl-`+e),t.metaKey&&(e=`Meta-`+e),n&&t.shiftKey&&(e=`Shift-`+e),e}function vPe(e){return new dY({props:{handleKeyDown:AQ(e)}})}function AQ(e){let t=_Pe(e);return function(e,n){let r=pPe(n),i,a=t[kQ(r,n)];if(a&&a(e.state,e.dispatch,e))return!0;if(r.length==1&&r!=` `){if(n.shiftKey){let i=t[kQ(r,n,!1)];if(i&&i(e.state,e.dispatch,e))return!0}if((n.altKey||n.metaKey||n.ctrlKey)&&!(hPe&&n.ctrlKey&&n.altKey)&&(i=TQ[n.keyCode])&&i!=r){let r=t[kQ(i,n)];if(r&&r(e.state,e.dispatch,e))return!0}}return!1}}function jQ(e){let{state:t,transaction:n}=e,{selection:r}=n,{doc:i}=n,{storedMarks:a}=n;return{...t,apply:t.apply.bind(t),applyTransaction:t.applyTransaction.bind(t),plugins:t.plugins,schema:t.schema,reconfigure:t.reconfigure.bind(t),toJSON:t.toJSON.bind(t),get storedMarks(){return a},get selection(){return r},get doc(){return i},get tr(){return r=n.selection,i=n.doc,a=n.storedMarks,n}}}var MQ=class e{constructor(e){this.editor=e.editor,this.rawCommands=this.editor.extensionManager.commands,this.customState=e.state}get hasCustomState(){return!!this.customState}get state(){return this.customState||this.editor.state}get commands(){let{rawCommands:e,editor:t,state:n}=this,{view:r}=t,{tr:i}=n,a=this.buildProps(i);return Object.fromEntries(Object.entries(e).map(([e,t])=>[e,(...e)=>{let n=t(...e)(a);return!i.getMeta(`preventDispatch`)&&!this.hasCustomState&&r.dispatch(i),n}]))}get chain(){return()=>this.createChain()}get can(){return()=>this.createCan()}createChain(e,t=!0){let{rawCommands:n,editor:r,state:i}=this,{view:a}=r,o=[],s=!!e,c=e||i.tr,l=()=>(!s&&t&&!c.getMeta(`preventDispatch`)&&!this.hasCustomState&&a.dispatch(c),o.every(e=>e===!0)),u={...Object.fromEntries(Object.entries(n).map(([e,n])=>[e,(...e)=>{let r=this.buildProps(c,t),i=n(...e)(r);return o.push(i),u}])),run:l};return u}static createFakeChain(){let e=new Proxy({},{get:(t,n)=>{if(n!==`then`)return n===`run`?()=>!1:()=>e}});return e}createCan(e){let{rawCommands:t,state:n}=this,r=e||n.tr,i=this.buildProps(r,!1);return{...Object.fromEntries(Object.entries(t).map(([e,t])=>[e,(...e)=>t(...e)({...i,dispatch:void 0})])),chain:()=>this.createChain(r,!1)}}static createFallbackCan(){let t=e.createFakeChain();return new Proxy({chain:()=>t},{get:(e,t)=>{if(t!==`then`)return t===`chain`?e.chain:()=>!1}})}buildProps(e,t=!0){let{rawCommands:n,editor:r,state:i}=this,{view:a}=r,o={tr:e,editor:r,view:a,state:jQ({state:i,transaction:e}),dispatch:t?()=>void 0:void 0,chain:()=>this.createChain(e,t),can:()=>this.createCan(e),get commands(){return Object.fromEntries(Object.entries(n).map(([e,t])=>[e,(...e)=>t(...e)(o)]))}};return o}},yPe=()=>({editor:e,view:t})=>(requestAnimationFrame(()=>{if(!e.isDestroyed){var n;t.dom.blur(),(n=window)==null||(n=n.getSelection())==null||n.removeAllRanges()}}),!0),bPe=(e=!0)=>({commands:t})=>t.setContent(``,{emitUpdate:e}),xPe=()=>({state:e,tr:t,dispatch:n})=>{let{selection:r}=t,{ranges:i}=r;return n&&i.forEach(({$from:n,$to:r})=>{e.doc.nodesBetween(n.pos,r.pos,(e,n)=>{if(e.type.isText)return;let{doc:r,mapping:i}=t,a=r.resolve(i.map(n)),o=r.resolve(i.map(n+e.nodeSize)),s=a.blockRange(o);if(!s)return;let c=CJ(s);if(e.type.isTextblock){let{defaultType:e}=a.parent.contentMatchAt(a.index());t.setNodeMarkup(s.start,e)}(c||c===0)&&t.lift(s,c)})}),!0},SPe=e=>t=>e(t),CPe=()=>({state:e,dispatch:t})=>kY(e,t),wPe=(e,t)=>({editor:n,tr:r})=>{let{state:i}=n,a=i.doc.slice(e.from,e.to);r.deleteRange(e.from,e.to);let o=r.mapping.map(t);return r.insert(o,a.content),r.setSelection(new ZJ(r.doc.resolve(Math.max(o-1,0)))),!0},TPe=()=>({tr:e,dispatch:t})=>{let{selection:n}=e,r=n.$anchor.node();if(r.content.size>0)return!1;let i=e.selection.$anchor;for(let n=i.depth;n>0;--n)if(i.node(n).type===r.type){if(t){let t=i.before(n),r=i.after(n);e.delete(t,r).scrollIntoView()}return!0}return!1};function NQ(e,t){if(typeof e==`string`){if(!t.nodes[e])throw Error(`There is no node type named '${e}'. Maybe you forgot to add the extension?`);return t.nodes[e]}return e}var EPe=e=>({tr:t,state:n,dispatch:r})=>{let i=NQ(e,n.schema),a=t.selection.$anchor;for(let e=a.depth;e>0;--e)if(a.node(e).type===i){if(r){let n=a.before(e),r=a.after(e);t.delete(n,r).scrollIntoView()}return!0}return!1},DPe=e=>({tr:t,dispatch:n})=>{let{from:r,to:i}=e;return n&&t.delete(r,i),!0},OPe=e=>e.content?/^text(\*|\+)/.test(e.content):!1,PQ=(e,t,n)=>{if(!e.parent.isInline||n===`left`&&e.pos>e.start()||n===`right`&&e.pos<e.end())return e.pos;let r=t.nodes[e.parent.type.name].spec;return OPe(r)?n===`left`?e.start()-1:e.end()+1:e.pos},kPe=(e,t,n)=>({from:PQ(e,n,`left`),to:PQ(t,n,`right`)}),APe=()=>({state:e,dispatch:t})=>{if(e.selection.empty)return!1;if(t){let n=e.tr,{ranges:r}=e.selection,i=n.steps.length;r.forEach(t=>{let r=n.mapping.slice(i),{from:a,to:o}=kPe(n.doc.resolve(r.map(t.$from.pos)),n.doc.resolve(r.map(t.$to.pos)),e.schema);n.deleteRange(a,o)}),n.selection.empty||n.setSelection(ZJ.near(n.doc.resolve(n.selection.from))),n.scrollIntoView(),t(n)}return!0},jPe=()=>({commands:e})=>e.keyboardShortcut(`Enter`),MPe=()=>({state:e,dispatch:t})=>OY(e,t);function FQ(e){return Object.prototype.toString.call(e)===`[object RegExp]`}function IQ(e,t,n={strict:!0}){let r=Object.keys(t);return r.length?r.every(r=>n.strict?t[r]===e[r]:FQ(t[r])?t[r].test(e[r]):t[r]===e[r]):!0}function LQ(e,t,n={}){return e.find(e=>e.type===t&&IQ(Object.fromEntries(Object.keys(n).map(t=>[t,e.attrs[t]])),n))}function RQ(e,t,n={}){return!!LQ(e,t,n)}function zQ(e,t,n){if(!e||!t)return;let r=e.parent.childAfter(e.parentOffset);if((!r.node||!r.node.marks.some(e=>e.type===t))&&(r=e.parent.childBefore(e.parentOffset)),!r.node||!r.node.marks.some(e=>e.type===t))return;if(!n){let e=r.node.marks.find(e=>e.type===t);e&&(n=e.attrs)}if(!LQ([...r.node.marks],t,n))return;let i=r.index,a=e.start()+r.offset,o=i+1,s=a+r.node.nodeSize;for(;i>0&&RQ([...e.parent.child(i-1).marks],t,n);)--i,a-=e.parent.child(i).nodeSize;for(;o<e.parent.childCount&&RQ([...e.parent.child(o).marks],t,n);)s+=e.parent.child(o).nodeSize,o+=1;return{from:a,to:s}}function BQ(e,t){if(typeof e==`string`){if(!t.marks[e])throw Error(`There is no mark type named '${e}'. Maybe you forgot to add the extension?`);return t.marks[e]}return e}var NPe=(e,t)=>({tr:n,state:r,dispatch:i})=>{let a=BQ(e,r.schema),{doc:o,selection:s}=n,{$from:c,from:l,to:u}=s;if(i){let e=zQ(c,a,t);if(e&&e.from<=l&&e.to>=u){let t=ZJ.create(o,e.from,e.to);n.setSelection(t)}}return!0},PPe=e=>t=>{let n=typeof e==`function`?e(t):e;for(let e=0;e<n.length;e+=1)if(n[e](t))return!0;return!1};function VQ(e){return e instanceof ZJ}function HQ(e=0,t=0,n=0){return Math.min(Math.max(e,t),n)}function UQ(e,t=null){if(!t)return null;let n=JJ.atStart(e),r=JJ.atEnd(e);if(t===`start`||t===!0)return n;if(t===`end`)return r;let i=n.from,a=r.to;return t===`all`?ZJ.create(e,HQ(0,i,a),HQ(e.content.size,i,a)):ZJ.create(e,HQ(t,i,a),HQ(t,i,a))}function WQ(){return[`Android`].includes(navigator.platform)||/android/i.test(navigator.userAgent)}function GQ(){return[`iPad Simulator`,`iPhone Simulator`,`iPod Simulator`,`iPad`,`iPhone`,`iPod`].includes(navigator.platform)||navigator.userAgent.includes(`Mac`)&&`ontouchend`in document}function FPe(){return typeof navigator<`u`?/^((?!chrome|android).)*safari/i.test(navigator.userAgent):!1}var IPe=(e=null,t={})=>({editor:n,view:r,tr:i,dispatch:a})=>{t={scrollIntoView:!0,...t};let o=()=>{(GQ()||WQ())&&r.dom.focus(),FPe()&&!GQ()&&!WQ()&&r.dom.focus({preventScroll:!0}),requestAnimationFrame(()=>{n.isDestroyed||(r.focus(),t?.scrollIntoView&&n.commands.scrollIntoView())})};try{if(r.hasFocus()&&e===null||e===!1)return!0}catch{return!1}if(a&&e===null&&!VQ(n.state.selection))return o(),!0;let s=UQ(i.doc,e)||n.state.selection,c=n.state.selection.eq(s);return a&&(c||i.setSelection(s),c&&i.storedMarks&&i.setStoredMarks(i.storedMarks),o()),!0},LPe=(e,t)=>n=>e.every((e,r)=>t(e,{...n,index:r})),RPe=(e,t)=>({tr:n,commands:r})=>r.insertContentAt({from:n.selection.from,to:n.selection.to},e,t),KQ=e=>{let t=e.childNodes;for(let n=t.length-1;n>=0;--n){let r=t[n];r.nodeType===3&&r.nodeValue&&/^(\n\s\s|\n)$/.test(r.nodeValue)?e.removeChild(r):r.nodeType===1&&KQ(r)}return e};function qQ(e){if(typeof window>`u`)throw Error(`[tiptap error]: there is no window object available, so this function cannot be used`);let t=`<body>${e}</body>`,n=new window.DOMParser().parseFromString(t,`text/html`).body;return KQ(n)}function JQ(e){return typeof e?.nodesBetween==`function`}function YQ(e,t,n){if(JQ(e))return e;let r=typeof e==`object`&&!!e;n={slice:!0,parseOptions:{},...n};let i=typeof e==`string`;if(r)try{if(Array.isArray(e)&&e.length>0)return oq.fromArray(e.map(e=>t.nodeFromJSON(e)));let r=t.nodeFromJSON(e);return n.errorOnInvalidContent&&r.check(),r}catch(r){if(n.errorOnInvalidContent)throw Error(`[tiptap error]: Invalid JSON content`,{cause:r});return console.warn(`[tiptap warn]: Invalid content.`,`Passed value:`,e,`Error:`,r),YQ(``,t,n)}if(i){if(n.errorOnInvalidContent){let r=!1,i=``,a=new zq({topNode:t.spec.topNode,marks:t.spec.marks,nodes:t.spec.nodes.append({__tiptap__private__unknown__catch__all__node:{content:`inline*`,group:`block`,parseDOM:[{tag:`*`,getAttrs:e=>(r=!0,i=typeof e==`string`?e:e.outerHTML,null)}]}})});if(n.slice?Vq.fromSchema(a).parseSlice(qQ(e),n.parseOptions):Vq.fromSchema(a).parse(qQ(e),n.parseOptions),n.errorOnInvalidContent&&r)throw Error(`[tiptap error]: Invalid HTML content`,{cause:Error(`Invalid element found: ${i}`)})}let r=Vq.fromSchema(t);return n.slice?r.parseSlice(qQ(e),n.parseOptions).content:r.parse(qQ(e),n.parseOptions)}return YQ(``,t,n)}function XQ(e){return!(`type`in e)}function ZQ(e,t,n){let r=e.steps.length-1;if(r<t)return;let i=e.steps[r];if(!(i instanceof yJ||i instanceof bJ))return;let a=e.mapping.maps[r],o=0;a.forEach((e,t,n,r)=>{o===0&&(o=r)}),e.setSelection(JJ.near(e.doc.resolve(o),n))}var zPe=(e,t,n)=>({tr:r,dispatch:i,editor:a})=>{if(i){n={parseOptions:a.options.parseOptions,updateSelection:!0,applyInputRules:!1,applyPasteRules:!1,...n};let i,o=e=>{a.emit(`contentError`,{editor:a,error:e,disableCollaboration:()=>{`collaboration`in a.storage&&typeof a.storage.collaboration==`object`&&a.storage.collaboration&&(a.storage.collaboration.isDisabled=!0)}})},s={preserveWhitespace:`full`,...n.parseOptions};if(!n.errorOnInvalidContent&&!a.options.enableContentCheck&&a.options.emitContentError)try{YQ(t,a.schema,{parseOptions:s,errorOnInvalidContent:!0})}catch(e){o(e)}try{i=YQ(t,a.schema,{parseOptions:s,errorOnInvalidContent:n.errorOnInvalidContent??a.options.enableContentCheck})}catch(e){return o(e),!1}let{from:c,to:l}=typeof e==`number`?{from:e,to:e}:{from:e.from,to:e.to},u=!0,d=!0,f=XQ(i)?i.content:[i];if(f.forEach(e=>{e.check(),u=u?e.isText&&e.marks.length===0:!1,d=d?e.isBlock:!1}),c===l&&d){let{parent:e}=r.doc.resolve(c);e.isTextblock&&!e.type.spec.code&&!e.childCount&&(--c,l+=1)}let p;if(u)p=Array.isArray(t)?t.map(e=>e.text||``).join(``):JQ(t)?f.map(e=>e.text??``).join(``):typeof t==`object`&&t&&t.text?t.text:t,r.insertText(p,c,l);else{p=oq.from(f);let e=r.doc.resolve(c),t=e.node(),n=e.parentOffset===0,i=t.isText||t.isTextblock,a=t.content.size>0;n&&i&&a&&d&&(c=Math.max(0,c-1)),r.replaceWith(c,l,f)}n.updateSelection&&ZQ(r,r.steps.length-1,-1),n.applyInputRules&&r.setMeta(`applyInputRules`,{from:c,text:p}),n.applyPasteRules&&r.setMeta(`applyPasteRules`,{from:c,text:p})}return!0};function QQ(e){for(let t=0;t<e.edgeCount;t+=1){let{type:n}=e.edge(t);if(n.isTextblock&&!n.hasRequiredAttrs())return n}return null}var BPe=(e={})=>({tr:t,dispatch:n,editor:r})=>{let{pos:i,attrs:a,content:o,updateSelection:s=!0}=e,c;c=typeof i==`number`?t.doc.resolve(i):i||t.selection.$from;let l=QQ(c.parent.contentMatchAt(c.index()));if(!l)return!1;let u=Object.keys(l.spec.attrs||{}),d=a?Object.fromEntries(Object.entries(a).filter(([e])=>u.includes(e))):{},f;if(o){let e=YQ(o,r.schema);f=l.createAndFill(d,e)}else f=l.createAndFill(d);return f?(n&&(t.insert(c.pos,f),s&&ZQ(t,t.steps.length-1,-1)),!0):!1},VPe=()=>({state:e,dispatch:t})=>uMe(e,t),HPe=()=>({state:e,dispatch:t})=>dMe(e,t),UPe=()=>({state:e,dispatch:t})=>_Y(e,t),WPe=()=>({state:e,dispatch:t})=>CY(e,t),GPe=()=>({state:e,dispatch:t,tr:n})=>{try{let r=jJ(e.doc,e.selection.$from.pos,-1);return r==null?!1:(n.join(r,2),t&&t(n),!0)}catch{return!1}},KPe=()=>({state:e,dispatch:t,tr:n})=>{try{let r=jJ(e.doc,e.selection.$from.pos,1);return r==null?!1:(n.join(r,2),t&&t(n),!0)}catch{return!1}},qPe=()=>({state:e,dispatch:t})=>cMe(e,t),JPe=()=>({state:e,dispatch:t})=>lMe(e,t);function $Q(){return typeof navigator<`u`?/Mac/.test(navigator.platform):!1}function YPe(e){let t=e.split(/-(?!$)/),n=t[t.length-1];n===`Space`&&(n=` `);let r,i,a,o;for(let e=0;e<t.length-1;e+=1){let n=t[e];if(/^(cmd|meta|m)$/i.test(n))o=!0;else if(/^a(lt)?$/i.test(n))r=!0;else if(/^(c|ctrl|control)$/i.test(n))i=!0;else if(/^s(hift)?$/i.test(n))a=!0;else if(/^mod$/i.test(n))GQ()||$Q()?o=!0:i=!0;else throw Error(`Unrecognized modifier name: ${n}`)}return r&&(n=`Alt-${n}`),i&&(n=`Ctrl-${n}`),o&&(n=`Meta-${n}`),a&&(n=`Shift-${n}`),n}var XPe=e=>({editor:t,view:n,tr:r,dispatch:i})=>{let a=YPe(e).split(/-(?!$)/),o=a.find(e=>![`Alt`,`Ctrl`,`Meta`,`Shift`].includes(e)),s=new KeyboardEvent(`keydown`,{key:o===`Space`?` `:o,altKey:a.includes(`Alt`),ctrlKey:a.includes(`Ctrl`),metaKey:a.includes(`Meta`),shiftKey:a.includes(`Shift`),bubbles:!0,cancelable:!0});return t.captureTransaction(()=>{n.someProp(`handleKeyDown`,e=>e(n,s))})?.steps.forEach(e=>{let t=e.map(r.mapping);t&&i&&r.maybeStep(t)}),!0};function e$(e,t,n={}){let{from:r,to:i,empty:a}=e.selection,o=t?NQ(t,e.schema):null,s=[];e.doc.nodesBetween(r,i,(e,t)=>{if(e.isText)return;let n=Math.max(r,t),a=Math.min(i,t+e.nodeSize);s.push({node:e,from:n,to:a})});let c=i-r,l=s.filter(e=>o?o.name===e.node.type.name:!0).filter(e=>IQ(e.node.attrs,n,{strict:!1}));return a?!!l.length:l.reduce((e,t)=>e+t.to-t.from,0)>=c}var ZPe=(e,t={})=>({state:n,dispatch:r})=>e$(n,NQ(e,n.schema),t)?fMe(n,r):!1,QPe=()=>({state:e,dispatch:t})=>AY(e,t),$Pe=e=>({state:t,dispatch:n})=>CMe(NQ(e,t.schema))(t,n),eFe=()=>({state:e,dispatch:t})=>EY(e,t);function t$(e,t){return t.nodes[e]?`node`:t.marks[e]?`mark`:null}function n$(e,t){let n=typeof t==`string`?[t]:t;return Object.keys(e).reduce((t,r)=>(n.includes(r)||(t[r]=e[r]),t),{})}var tFe=(e,t)=>({tr:n,state:r,dispatch:i})=>{let a=null,o=null,s=t$(typeof e==`string`?e:e.name,r.schema);if(!s)return!1;s===`node`&&(a=NQ(e,r.schema)),s===`mark`&&(o=BQ(e,r.schema));let c=!1;return n.selection.ranges.forEach(e=>{r.doc.nodesBetween(e.$from.pos,e.$to.pos,(e,r)=>{a&&a===e.type&&(c=!0,i&&n.setNodeMarkup(r,void 0,n$(e.attrs,t))),o&&e.marks.length&&e.marks.forEach(a=>{o===a.type&&(c=!0,i&&n.addMark(r,r+e.nodeSize,o.create(n$(a.attrs,t))))})})}),c},nFe=()=>({tr:e,dispatch:t})=>(t&&e.scrollIntoView(),!0),rFe=()=>({tr:e,dispatch:t})=>{if(t){let t=new eY(e.doc);e.setSelection(t)}return!0},iFe=()=>({state:e,dispatch:t})=>bY(e,t),aFe=()=>({state:e,dispatch:t})=>wY(e,t),oFe=()=>({state:e,dispatch:t})=>hMe(e,t),sFe=()=>({state:e,dispatch:t})=>PY(e,t),cFe=()=>({state:e,dispatch:t})=>NY(e,t);function r$(e,t,n={},r={}){return YQ(e,t,{slice:!1,parseOptions:n,errorOnInvalidContent:r.errorOnInvalidContent})}var lFe=(e,{errorOnInvalidContent:t,emitUpdate:n=!0,parseOptions:r={}}={})=>({editor:i,tr:a,dispatch:o,commands:s})=>{let{doc:c}=a;if(r.preserveWhitespace!==`full`){let s=r$(e,i.schema,r,{errorOnInvalidContent:t??i.options.enableContentCheck});if(o){let e=XQ(s)?s.content:[s];a.replaceWith(0,c.content.size,e).setMeta(`preventUpdate`,!n)}return!0}return o&&a.setMeta(`preventUpdate`,!n),s.insertContentAt({from:0,to:c.content.size},e,{parseOptions:r,errorOnInvalidContent:t??i.options.enableContentCheck})};function i$(e,t){let n=BQ(t,e.schema),{from:r,to:i,empty:a}=e.selection,o=[];a?(e.storedMarks&&o.push(...e.storedMarks),o.push(...e.selection.$head.marks())):e.doc.nodesBetween(r,i,e=>{o.push(...e.marks)});let s=o.find(e=>e.type.name===n.name);return s?{...s.attrs}:{}}function a$(e,t){let n=new KJ(e);return t.forEach(e=>{e.steps.forEach(e=>{n.step(e)})}),n}function uFe(e,t,n){let r=[];return e.nodesBetween(t.from,t.to,(e,t)=>{n(e)&&r.push({node:e,pos:t})}),r}function dFe(e,t){for(let n=e.depth;n>0;--n){let r=e.node(n);if(t(r))return{pos:n>0?e.before(n):0,start:e.start(n),depth:n,node:r}}}function o$(e){return t=>dFe(t.$from,e)}function s$(e,t,n){return e.config[t]===void 0&&e.parent?s$(e.parent,t,n):typeof e.config[t]==`function`?e.config[t].bind({...n,parent:e.parent?s$(e.parent,t,n):null}):e.config[t]}function c$(e){return e.map(e=>{let t=s$(e,`addExtensions`,{name:e.name,options:e.options,storage:e.storage});return t?[e,...c$(t())]:e}).flat(10)}function l$(e,t){let n=Qq.fromSchema(t).serializeFragment(e),r=document.implementation.createHTMLDocument().createElement(`div`);return r.appendChild(n),r.innerHTML}function u$(e){return typeof e==`function`}function d$(e,t=void 0,...n){return u$(e)?t?e.bind(t)(...n):e(...n):e}function fFe(e={}){return Object.keys(e).length===0&&e.constructor===Object}function f$(e){return{baseExtensions:e.filter(e=>e.type===`extension`),nodeExtensions:e.filter(e=>e.type===`node`),markExtensions:e.filter(e=>e.type===`mark`)}}function p$(e){let t=[],{nodeExtensions:n,markExtensions:r}=f$(e),i=[...n,...r],a={default:null,validate:void 0,rendered:!0,renderHTML:null,parseHTML:null,keepOnSplit:!0,isRequired:!1},o=n.filter(e=>e.name!==`text`).map(e=>e.name),s=r.map(e=>e.name),c=[...o,...s];return e.forEach(e=>{let n=s$(e,`addGlobalAttributes`,{name:e.name,options:e.options,storage:e.storage,extensions:i});n&&n().forEach(e=>{let n;n=Array.isArray(e.types)?e.types:e.types===`*`?c:e.types===`nodes`?o:e.types===`marks`?s:[],n.forEach(n=>{Object.entries(e.attributes).forEach(([e,r])=>{t.push({type:n,name:e,attribute:{...a,...r}})})})})}),i.forEach(e=>{let n=s$(e,`addAttributes`,{name:e.name,options:e.options,storage:e.storage});if(!n)return;let r=n();Object.entries(r).forEach(([n,r])=>{let i={...a,...r};typeof i?.default==`function`&&(i.default=i.default()),i?.isRequired&&i?.default===void 0&&delete i.default,t.push({type:e.name,name:n,attribute:i})})}),t}function pFe(e){let t=[],n=``,r=!1,i=!1,a=0,o=e.length;for(let s=0;s<o;s+=1){let o=e[s];if(o===`'`&&!i){r=!r,n+=o;continue}if(o===`"`&&!r){i=!i,n+=o;continue}if(!r&&!i){if(o===`(`){a+=1,n+=o;continue}if(o===`)`&&a>0){--a,n+=o;continue}if(o===`;`&&a===0){t.push(n),n=``;continue}}n+=o}return n&&t.push(n),t}function m$(e){let t=[],n=pFe(e||``),r=n.length;for(let e=0;e<r;e+=1){let r=n[e],i=r.indexOf(`:`);if(i===-1)continue;let a=r.slice(0,i).trim(),o=r.slice(i+1).trim();a&&o&&t.push([a,o])}return t}function h$(...e){return e.filter(e=>!!e).reduce((e,t)=>{let n={...e};return Object.entries(t).forEach(([e,t])=>{if(e===`__proto__`){Object.defineProperty(n,e,{configurable:!0,enumerable:!0,value:t,writable:!0});return}if(!n[e]){n[e]=t;return}if(e===`class`){let r=t?String(t).split(` `):[],i=n[e]?n[e].split(` `):[],a=r.filter(e=>!i.includes(e));n[e]=[...i,...a].join(` `)}else if(e===`style`){let r=new Map([...m$(n[e]),...m$(t)]);n[e]=Array.from(r.entries()).map(([e,t])=>`${e}: ${t}`).join(`; `)}else n[e]=t}),n},{})}function g$(e,t){return t.filter(t=>t.type===e.type.name).filter(e=>e.attribute.rendered).map(t=>t.attribute.renderHTML?t.attribute.renderHTML(e.attrs)||{}:{[t.name]:e.attrs[t.name]}).reduce((e,t)=>h$(e,t),{})}function mFe(e){return typeof e==`string`?e.match(/^[+-]?(?:\d*\.)?\d+$/)?Number(e):e===`true`?!0:e===`false`?!1:e:e}function _$(e,t){return`style`in e?e:{...e,getAttrs:n=>{let r=e.getAttrs?e.getAttrs(n):e.attrs;if(r===!1)return!1;let i=t.reduce((e,t)=>{let r=t.attribute.parseHTML?t.attribute.parseHTML(n):mFe(n.getAttribute(t.name));return r==null?e:{...e,[t.name]:r}},{});return{...r,...i}}}}function v$(e){return Object.fromEntries(Object.entries(e).filter(([e,t])=>e===`attrs`&&fFe(t)?!1:t!=null))}function y$(e){var t,n;let r={};return!(!(e==null||(t=e.attribute)==null)&&t.isRequired)&&`default`in(e?.attribute||{})&&(r.default=e.attribute.default),(e==null||(n=e.attribute)==null?void 0:n.validate)!==void 0&&(r.validate=e.attribute.validate),[e.name,r]}function hFe(e,t){let n=p$(e),{nodeExtensions:r,markExtensions:i}=f$(e);return new zq({topNode:r.find(e=>s$(e,`topNode`))?.name,nodes:Object.fromEntries(r.map(r=>{let i=n.filter(e=>e.type===r.name),a={name:r.name,options:r.options,storage:r.storage,editor:t},o=v$({...e.reduce((e,t)=>{let n=s$(t,`extendNodeSchema`,a);return{...e,...n?n(r):{}}},{}),content:d$(s$(r,`content`,a)),marks:d$(s$(r,`marks`,a)),group:d$(s$(r,`group`,a)),inline:d$(s$(r,`inline`,a)),atom:d$(s$(r,`atom`,a)),selectable:d$(s$(r,`selectable`,a)),draggable:d$(s$(r,`draggable`,a)),code:d$(s$(r,`code`,a)),whitespace:d$(s$(r,`whitespace`,a)),linebreakReplacement:d$(s$(r,`linebreakReplacement`,a)),defining:d$(s$(r,`defining`,a)),isolating:d$(s$(r,`isolating`,a)),attrs:Object.fromEntries(i.map(y$))}),s=d$(s$(r,`parseHTML`,a));s&&(o.parseDOM=s.map(e=>_$(e,i)));let c=s$(r,`renderHTML`,a);c&&(o.toDOM=e=>c({node:e,HTMLAttributes:g$(e,i)}));let l=s$(r,`renderText`,a);return l&&(o.toText=l),[r.name,o]})),marks:Object.fromEntries(i.map(r=>{let i=n.filter(e=>e.type===r.name),a={name:r.name,options:r.options,storage:r.storage,editor:t},o=v$({...e.reduce((e,t)=>{let n=s$(t,`extendMarkSchema`,a);return{...e,...n?n(r):{}}},{}),inclusive:d$(s$(r,`inclusive`,a)),excludes:d$(s$(r,`excludes`,a)),group:d$(s$(r,`group`,a)),spanning:d$(s$(r,`spanning`,a)),code:d$(s$(r,`code`,a)),attrs:Object.fromEntries(i.map(y$))}),s=d$(s$(r,`parseHTML`,a));s&&(o.parseDOM=s.map(e=>_$(e,i)));let c=s$(r,`renderHTML`,a);return c&&(o.toDOM=e=>c({mark:e,HTMLAttributes:g$(e,i)})),[r.name,o]}))})}function gFe(e){let t=e.filter((t,n)=>e.indexOf(t)!==n);return Array.from(new Set(t))}function b$(e){return e.sort((e,t)=>{let n=s$(e,`priority`)||100,r=s$(t,`priority`)||100;return n>r?-1:+(n<r)})}function x$(e){let t=b$(c$(e)),n=gFe(t.map(e=>e.name));return n.length&&console.warn(`[tiptap warn]: Duplicate extension names found: [${n.map(e=>`'${e}'`).join(`, `)}]. This can lead to issues.`),t}function S$(e,t,n){let{from:r,to:i}=t,{blockSeparator:a=`
+`),slice:t}}function wZ(e,t,n,r,i){let a=i.parent.type.spec.code,o,s;if(!n&&!t)return null;let c=!!t&&(r||a||!n);if(c){if(e.someProp(`transformPastedText`,n=>{t=n(t,a||r,e)}),a)return s=new hq(lq.from(e.state.schema.text(t.replace(/\r\n?/g,`
+`))),0,0),e.someProp(`transformPasted`,t=>{s=t(s,e,!0)}),s;let n=e.someProp(`clipboardTextParser`,n=>n(t,i,r,e));if(n)s=n;else{let n=i.marks(),{schema:r}=e.state,a=tJ.fromSchema(r);o=document.createElement(`div`),t.split(/(?:\r\n?|\n)+/).forEach(e=>{let t=o.appendChild(document.createElement(`p`));e&&t.appendChild(a.serializeNode(r.text(e,n)))})}}else e.someProp(`transformPastedHTML`,t=>{n=t(n,e)}),o=bNe(n),gX&&xNe(o);let l=o&&o.querySelector(`[data-pm-slice]`),u=l&&/^(\d+) (\d+)(?: -(\d+))? (.*)/.exec(l.getAttribute(`data-pm-slice`)||``);if(u&&u[3])for(let e=+u[3];e>0;e--){let e=o.firstChild;for(;e&&e.nodeType!=1;)e=e.nextSibling;if(!e)break;o=e}if(s||=(e.someProp(`clipboardParser`)||e.someProp(`domParser`)||Wq.fromSchema(e.state.schema)).parseSlice(o,{preserveWhitespace:!!(c||u),context:i,ruleFromNode(e){return e.nodeName==`BR`&&!e.nextSibling&&e.parentNode&&!_Ne.test(e.parentNode.nodeName)?{ignore:!0}:null}}),u)s=SNe(kZ(s,+u[1],+u[2]),u[4]);else if(s=hq.maxOpen(vNe(s.content,i),!0),s.openStart||s.openEnd){let e=0,t=0;for(let t=s.content.firstChild;e<s.openStart&&!t.type.spec.isolating;e++,t=t.firstChild);for(let e=s.content.lastChild;t<s.openEnd&&!e.type.spec.isolating;t++,e=e.lastChild);s=kZ(s,e,t)}return e.someProp(`transformPasted`,t=>{s=t(s,e,c)}),s}var _Ne=/^(a|abbr|acronym|b|cite|code|del|em|i|ins|kbd|label|output|q|ruby|s|samp|span|strong|sub|sup|time|u|tt|var)$/i;function vNe(e,t){if(e.childCount<2)return e;for(let n=t.depth;n>=0;n--){let r=t.node(n).contentMatchAt(t.index(n)),i,a=[];if(e.forEach(e=>{if(!a)return;let t=r.findWrapping(e.type),n;if(!t)return a=null;if(n=a.length&&i.length&&EZ(t,i,e,a[a.length-1],0))a[a.length-1]=n;else{a.length&&(a[a.length-1]=DZ(a[a.length-1],i.length));let n=TZ(e,t);a.push(n),r=r.matchType(n.type),i=t}}),a)return lq.from(a)}return e}function TZ(e,t,n=0){for(let r=t.length-1;r>=n;r--)e=t[r].create(null,lq.from(e));return e}function EZ(e,t,n,r,i){if(i<e.length&&i<t.length&&e[i]==t[i]){let a=EZ(e,t,n,r.lastChild,i+1);if(a)return r.copy(r.content.replaceChild(r.childCount-1,a));if(r.contentMatchAt(r.childCount).matchType(i==e.length-1?n.type:e[i+1]))return r.copy(r.content.append(lq.from(TZ(n,e,i+1))))}}function DZ(e,t){if(t==0)return e;let n=e.content.replaceChild(e.childCount-1,DZ(e.lastChild,t-1)),r=e.contentMatchAt(e.childCount).fillBefore(lq.empty,!0);return e.copy(n.append(r))}function OZ(e,t,n,r,i,a){let o=t<0?e.firstChild:e.lastChild,s=o.content;return e.childCount>1&&(a=0),i<r-1&&(s=OZ(s,t,n,r,i+1,a)),i>=n&&(s=t<0?o.contentMatchAt(0).fillBefore(s,a<=i).append(s):s.append(o.contentMatchAt(o.childCount).fillBefore(lq.empty,!0))),e.replaceChild(t<0?0:e.childCount-1,o.copy(s))}function kZ(e,t,n){return t<e.openStart&&(e=new hq(OZ(e.content,-1,t,e.openStart,0,e.openEnd),t,e.openEnd)),n<e.openEnd&&(e=new hq(OZ(e.content,1,n,e.openEnd,0,0),e.openStart,n)),e}var AZ={thead:[`table`],tbody:[`table`],tfoot:[`table`],caption:[`table`],colgroup:[`table`],col:[`table`,`colgroup`],tr:[`table`,`tbody`],td:[`table`,`tbody`,`tr`],th:[`table`,`tbody`,`tr`]};function jZ(){return document.implementation.createHTMLDocument(`title`)}var MZ=null;function yNe(e){let t=window.trustedTypes;if(!t)return e;if(!MZ){if(MZ=t.defaultPolicy)try{return MZ.createHTML(e)}catch{}MZ=t.createPolicy(`ProseMirrorClipboard`,{createHTML:e=>e})}return MZ.createHTML(e)}function bNe(e){let t=/^(\s*<meta [^>]*>)*/.exec(e);t&&(e=e.slice(t[0].length));let n=jZ(),r=n.body,i=/<([a-z][^>\s]+)/i.exec(e),a;if((a=i&&AZ[i[1].toLowerCase()])&&(e=a.map(e=>`<`+e+`>`).join(``)+e+a.map(e=>`</`+e+`>`).reverse().join(``)),r.innerHTML=yNe(e),a)for(let e=0;e<a.length;e++)r=r.querySelector(a[e])||r;for(let e=0;e<n.styleSheets.length;e++){let t=n.styleSheets[e];for(let e=0;e<t.rules.length;e++){let n=t.rules[e];if(n instanceof CSSStyleRule){let e=r.querySelectorAll(n.selectorText);for(let t=0;t<e.length;t++)e[t].style.cssText+=n.style.cssText}}}return r}function xNe(e){let t=e.querySelectorAll(lX?`span:not([class]):not([style])`:`span.Apple-converted-space`);for(let n=0;n<t.length;n++){let r=t[n];r.childNodes.length==1&&r.textContent==`\xA0`&&r.parentNode&&r.parentNode.replaceChild(e.ownerDocument.createTextNode(` `),r)}}function SNe(e,t){if(!e.size)return e;let n=e.content.firstChild.type.schema,r;try{r=JSON.parse(t)}catch{return e}let{content:i,openStart:a,openEnd:o}=e;for(let e=r.length-2;e>=0;e-=2){let t=n.nodes[r[e]];if(!t||t.hasRequiredAttrs())break;try{t.checkAttrs(r[e+1])}catch{break}i=lq.from(t.create(r[e+1],i)),a++,o++}return new hq(i,a,o)}var NZ={},PZ={},CNe={touchstart:!0,touchmove:!0},wNe=class{constructor(){this.shiftKey=!1,this.mouseDown=null,this.lastKeyCode=null,this.lastKeyCodeTime=0,this.lastClick={time:0,x:0,y:0,type:``,button:0},this.lastSelectionOrigin=null,this.lastSelectionTime=0,this.lastIOSEnter=0,this.lastIOSEnterFallbackTimeout=-1,this.lastFocus=0,this.lastTouch=0,this.lastChromeDelete=0,this.composing=!1,this.compositionNode=null,this.composingTimeout=-1,this.compositionNodes=[],this.compositionEndedAt=-2e8,this.compositionID=1,this.badSafariComposition=!1,this.compositionPendingChanges=0,this.domChangeCount=0,this.eventHandlers=Object.create(null),this.hideSelectionGuard=null}};function TNe(e){for(let t in NZ){let n=NZ[t];e.dom.addEventListener(t,e.input.eventHandlers[t]=t=>{DNe(e,t)&&!LZ(e,t)&&(e.editable||!(t.type in PZ))&&n(e,t)},CNe[t]?{passive:!0}:void 0)}dX&&e.dom.addEventListener(`input`,()=>null),IZ(e)}function FZ(e,t){e.input.lastSelectionOrigin=t,e.input.lastSelectionTime=Date.now()}function ENe(e){e.input.mouseDown&&e.input.mouseDown.done(),e.domObserver.stop();for(let t in e.input.eventHandlers)e.dom.removeEventListener(t,e.input.eventHandlers[t]);clearTimeout(e.input.composingTimeout),clearTimeout(e.input.lastIOSEnterFallbackTimeout)}function IZ(e){e.someProp(`handleDOMEvents`,t=>{for(let n in t)e.input.eventHandlers[n]||e.dom.addEventListener(n,e.input.eventHandlers[n]=t=>LZ(e,t))})}function LZ(e,t){return e.someProp(`handleDOMEvents`,n=>{let r=n[t.type];return r?r(e,t)||t.defaultPrevented:!1})}function DNe(e,t){if(!t.bubbles)return!0;if(t.defaultPrevented)return!1;for(let n=t.target;n!=e.dom;n=n.parentNode)if(!n||n.nodeType==11||n.pmViewDesc&&n.pmViewDesc.stopEvent(t))return!1;return!0}function ONe(e,t){!LZ(e,t)&&NZ[t.type]&&(e.editable||!(t.type in PZ))&&NZ[t.type](e,t)}PZ.keydown=(e,t)=>{let n=t;if(e.input.shiftKey=n.keyCode==16||n.shiftKey,!GZ(e)&&(e.input.lastKeyCode=n.keyCode,e.input.lastKeyCodeTime=Date.now(),!(hX&&lX&&n.keyCode==13)))if(n.keyCode!=229&&e.domObserver.forceFlush(),fX&&n.keyCode==13&&!n.ctrlKey&&!n.altKey&&!n.metaKey){let t=Date.now();e.input.lastIOSEnter=t,e.input.lastIOSEnterFallbackTimeout=setTimeout(()=>{e.input.lastIOSEnter==t&&(e.someProp(`handleKeyDown`,t=>t(e,QY(13,`Enter`))),e.input.lastIOSEnter=0)},200)}else e.someProp(`handleKeyDown`,t=>t(e,n))||gNe(e,n)?n.preventDefault():FZ(e,`key`)},PZ.keyup=(e,t)=>{t.keyCode==16&&(e.input.shiftKey=!1)},PZ.keypress=(e,t)=>{let n=t;if(GZ(e)||!n.charCode||n.ctrlKey&&!n.altKey||pX&&n.metaKey)return;if(e.someProp(`handleKeyPress`,t=>t(e,n))){n.preventDefault();return}let r=e.state.selection;if(!(r instanceof eY)||!r.$from.sameParent(r.$to)){let t=String.fromCharCode(n.charCode),i=()=>e.state.tr.insertText(t).scrollIntoView();!/[\r\n]/.test(t)&&!e.someProp(`handleTextInput`,n=>n(e,r.$from.pos,r.$to.pos,t,i))&&e.dispatch(i()),n.preventDefault()}};function RZ(e){return{left:e.clientX,top:e.clientY}}function kNe(e,t){let n=t.x-e.clientX,r=t.y-e.clientY;return n*n+r*r<100}function zZ(e,t,n,r,i){if(r==-1)return!1;let a=e.state.doc.resolve(r);for(let r=a.depth+1;r>0;r--)if(e.someProp(t,t=>r>a.depth?t(e,n,a.nodeAfter,a.before(r),i,!0):t(e,n,a.node(r),a.before(r),i,!1)))return!0;return!1}function BZ(e,t,n){if(e.focused||e.focus(),e.state.selection.eq(t))return;let r=e.state.tr.setSelection(t);n==`pointer`&&r.setMeta(`pointer`,!0),e.dispatch(r)}function ANe(e,t){if(t==-1)return!1;let n=e.state.doc.resolve(t),r=n.nodeAfter;return r&&r.isAtom&&nY.isSelectable(r)?(BZ(e,new nY(n),`pointer`),!0):!1}function jNe(e,t){if(t==-1)return!1;let n=e.state.selection,r,i;n instanceof nY&&(r=n.node);let a=e.state.doc.resolve(t);for(let e=a.depth+1;e>0;e--){let t=e>a.depth?a.nodeAfter:a.node(e);if(nY.isSelectable(t)){i=r&&n.$from.depth>0&&e>=n.$from.depth&&a.before(n.$from.depth+1)==n.$from.pos?a.before(n.$from.depth):a.before(e);break}}return i==null?!1:(BZ(e,nY.create(e.state.doc,i),`pointer`),!0)}function MNe(e,t,n,r,i){return zZ(e,`handleClickOn`,t,n,r)||e.someProp(`handleClick`,n=>n(e,t,r))||(i?jNe(e,n):ANe(e,n))}function NNe(e,t,n,r){return zZ(e,`handleDoubleClickOn`,t,n,r)||e.someProp(`handleDoubleClick`,n=>n(e,t,r))}function PNe(e,t,n,r){return zZ(e,`handleTripleClickOn`,t,n,r)||e.someProp(`handleTripleClick`,n=>n(e,t,r))||FNe(e,n,r)}function FNe(e,t,n){if(n.button!=0)return!1;let r=VZ(e,t,!0),i=e.state.doc;return r?(BZ(e,r,`pointer`),r instanceof eY&&i.eq(e.state.doc)&&(e.input.mouseDown=new LNe(e,r)),!0):!1}function VZ(e,t,n){let r=e.state.doc;if(t==-1)return r.inlineContent?eY.create(r,0,r.content.size):null;let i=r.resolve(t);for(let e=i.depth+1;e>0;e--){let t=e>i.depth?i.nodeAfter:i.node(e),a=i.before(e);if(t.inlineContent)return eY.create(r,a+1,a+1+t.content.size);if(n&&nY.isSelectable(t))return nY.create(r,a)}return null}function HZ(e){return JZ(e)}var UZ=pX?`metaKey`:`ctrlKey`;NZ.mousedown=(e,t)=>{let n=t;e.input.shiftKey=n.shiftKey;let r=HZ(e),i=Date.now(),a=`singleClick`;i-e.input.lastClick.time<500&&kNe(n,e.input.lastClick)&&!n[UZ]&&e.input.lastClick.button==n.button&&(e.input.lastClick.type==`singleClick`?a=`doubleClick`:e.input.lastClick.type==`doubleClick`&&(a=`tripleClick`)),e.input.lastClick={time:i,x:n.clientX,y:n.clientY,type:a,button:n.button},e.input.mouseDown&&e.input.mouseDown.done();let o=e.posAtCoords(RZ(n));o&&(a==`singleClick`?e.input.mouseDown=new INe(e,o,n,!!r):(a==`doubleClick`?NNe:PNe)(e,o.pos,o.inside,n)?n.preventDefault():FZ(e,`pointer`))};var WZ=class{constructor(e){this.view=e,this.mightDrag=null,e.root.addEventListener(`mouseup`,this.up=this.up.bind(this)),e.root.addEventListener(`mousemove`,this.move=this.move.bind(this))}up(e){this.done()}move(e){e.buttons==0&&this.done()}done(){this.view.root.removeEventListener(`mouseup`,this.up),this.view.root.removeEventListener(`mousemove`,this.move),this.view.input.mouseDown==this&&(this.view.input.mouseDown=null)}delaySelUpdate(){return!1}},INe=class extends WZ{constructor(e,t,n,r){super(e),this.pos=t,this.event=n,this.flushed=r,this.delayedSelectionSync=!1,this.startDoc=e.state.doc,this.selectNode=!!n[UZ],this.allowDefault=n.shiftKey;let i,a;if(t.inside>-1)i=e.state.doc.nodeAt(t.inside),a=t.inside;else{let n=e.state.doc.resolve(t.pos);i=n.parent,a=n.depth?n.before():0}let o=r?null:n.target,s=o?e.docView.nearestDesc(o,!0):null;this.target=s&&s.nodeDOM.nodeType==1?s.nodeDOM:null;let{selection:c}=e.state;n.button==0&&(i.type.spec.draggable&&i.type.spec.selectable!==!1||c instanceof nY&&c.from<=a&&c.to>a)&&(this.mightDrag={node:i,pos:a,addAttr:!!(this.target&&!this.target.draggable),setUneditable:!!(this.target&&sX&&!this.target.hasAttribute(`contentEditable`))}),this.target&&this.mightDrag&&(this.mightDrag.addAttr||this.mightDrag.setUneditable)&&(this.view.domObserver.stop(),this.mightDrag.addAttr&&(this.target.draggable=!0),this.mightDrag.setUneditable&&setTimeout(()=>{this.view.input.mouseDown==this&&this.target.setAttribute(`contentEditable`,`false`)},20),this.view.domObserver.start()),FZ(e,`pointer`)}done(){super.done(),this.mightDrag&&this.target&&(this.view.domObserver.stop(),this.mightDrag.addAttr&&this.target.removeAttribute(`draggable`),this.mightDrag.setUneditable&&this.target.removeAttribute(`contentEditable`),this.view.domObserver.start()),this.delayedSelectionSync&&setTimeout(()=>{this.view.isDestroyed||tZ(this.view)})}up(e){if(this.done(),!this.view.dom.contains(e.target))return;let t=this.pos;this.view.state.doc!=this.startDoc&&(t=this.view.posAtCoords(RZ(e))),this.updateAllowDefault(e),this.allowDefault||!t?FZ(this.view,`pointer`):MNe(this.view,t.pos,t.inside,e,this.selectNode)?e.preventDefault():e.button==0&&(this.flushed||dX&&this.mightDrag&&!this.mightDrag.node.isAtom||lX&&!this.view.state.selection.visible&&Math.min(Math.abs(t.pos-this.view.state.selection.from),Math.abs(t.pos-this.view.state.selection.to))<=2)?(BZ(this.view,ZJ.near(this.view.state.doc.resolve(t.pos)),`pointer`),e.preventDefault()):FZ(this.view,`pointer`)}move(e){this.updateAllowDefault(e),FZ(this.view,`pointer`),super.move(e)}updateAllowDefault(e){!this.allowDefault&&(Math.abs(this.event.x-e.clientX)>4||Math.abs(this.event.y-e.clientY)>4)&&(this.allowDefault=!0)}delaySelUpdate(){return this.allowDefault?(this.delayedSelectionSync=!0,!0):!1}},LNe=class extends WZ{constructor(e,t){super(e),this.startSelection=t,this.startDoc=e.state.doc}move(e){if(e.buttons==0||this.view.isDestroyed||!this.view.state.doc.eq(this.startDoc)){this.done();return}e.preventDefault(),FZ(this.view,`pointer`);let t=this.view.posAtCoords(RZ(e)),n=t&&VZ(this.view,t.inside,!1);if(!n)return;let{doc:r}=this.view.state,i=this.startSelection,[a,o]=n.from<i.from?[i.to,n.from]:[i.from,n.to];BZ(this.view,eY.create(r,a,o),`pointer`)}};NZ.touchstart=e=>{e.input.lastTouch=Date.now(),HZ(e),FZ(e,`pointer`)},NZ.touchmove=e=>{e.input.lastTouch=Date.now(),FZ(e,`pointer`)},NZ.contextmenu=e=>HZ(e);function GZ(e,t){return e.composing?!0:dX&&Math.abs(Date.now()-e.input.compositionEndedAt)<500?(e.input.compositionEndedAt=-2e8,!0):!1}var RNe=hX?5e3:-1;PZ.compositionstart=PZ.compositionupdate=e=>{if(!e.composing){e.domObserver.flush();let{state:t}=e,n=t.selection.$to;if(t.selection instanceof eY&&(t.storedMarks||!n.textOffset&&n.parentOffset&&n.nodeBefore.marks.some(e=>e.type.spec.inclusive===!1)||lX&&mX&&zNe(e)))e.markCursor=e.state.storedMarks||n.marks(),JZ(e,!0),e.markCursor=null;else if(JZ(e,!t.selection.empty),sX&&t.selection.empty&&n.parentOffset&&!n.textOffset&&n.nodeBefore.marks.length){let t=e.domSelectionRange();for(let n=t.focusNode,r=t.focusOffset;n&&n.nodeType==1&&r!=0;){let t=r<0?n.lastChild:n.childNodes[r-1];if(!t)break;if(t.nodeType==3){let n=e.domSelection();n&&n.collapse(t,t.nodeValue.length);break}else n=t,r=-1}}e.input.composing=!0}KZ(e,RNe)};function zNe(e){let{focusNode:t,focusOffset:n}=e.domSelectionRange();if(!t||t.nodeType!=1||n>=t.childNodes.length)return!1;let r=t.childNodes[n];return r.nodeType==1&&r.contentEditable==`false`}PZ.compositionend=(e,t)=>{e.composing&&(e.input.composing=!1,e.input.compositionEndedAt=Date.now(),e.input.compositionPendingChanges=e.domObserver.pendingRecords().length?e.input.compositionID:0,e.input.compositionNode=null,e.input.badSafariComposition?e.domObserver.forceFlush():e.input.compositionPendingChanges&&Promise.resolve().then(()=>e.domObserver.flush()),e.input.compositionID++,KZ(e,20))};function KZ(e,t){clearTimeout(e.input.composingTimeout),t>-1&&(e.input.composingTimeout=setTimeout(()=>JZ(e),t))}function qZ(e){for(e.composing&&(e.input.composing=!1,e.input.compositionEndedAt=Date.now());e.input.compositionNodes.length>0;)e.input.compositionNodes.pop().markParentsDirty()}function BNe(e){let t=e.domSelectionRange();if(!t.focusNode)return null;let n=AMe(t.focusNode,t.focusOffset),r=jMe(t.focusNode,t.focusOffset);if(n&&r&&n!=r){let t=r.pmViewDesc,i=e.domObserver.lastChangedTextNode;if(n==i||r==i)return i;if(!t||!t.isText(r.nodeValue))return r;if(e.input.compositionNode==r){let e=n.pmViewDesc;if(!(!e||!e.isText(n.nodeValue)))return r}}return n||r}function JZ(e,t=!1){if(!(hX&&e.domObserver.flushingSoon>=0)){if(e.domObserver.forceFlush(),qZ(e),t||e.docView&&e.docView.dirty){let n=$X(e),r=e.state.selection;return n&&!n.eq(r)?e.dispatch(e.state.tr.setSelection(n)):(e.markCursor||t)&&!r.$from.node(r.$from.sharedDepth(r.to)).inlineContent?e.dispatch(e.state.tr.deleteSelection()):e.updateState(e.state),!0}return!1}}function VNe(e,t){if(!e.dom.parentNode)return;let n=e.dom.parentNode.appendChild(document.createElement(`div`));n.appendChild(t),n.style.cssText=`position: fixed; left: -10000px; top: 10px`;let r=getSelection(),i=document.createRange();i.selectNodeContents(t),e.dom.blur(),r.removeAllRanges(),r.addRange(i),setTimeout(()=>{n.parentNode&&n.parentNode.removeChild(n),e.focus()},50)}var YZ=aX&&oX<15||fX&&FMe<604;NZ.copy=PZ.cut=(e,t)=>{let n=t,r=e.state.selection,i=n.type==`cut`;if(r.empty)return;let a=YZ?null:n.clipboardData,{dom:o,text:s}=CZ(e,r.content());a?(n.preventDefault(),a.clearData(),a.setData(`text/html`,o.innerHTML),a.setData(`text/plain`,s)):VNe(e,o),i&&e.dispatch(e.state.tr.deleteSelection().scrollIntoView().setMeta(`uiEvent`,`cut`))};function HNe(e){return e.openStart==0&&e.openEnd==0&&e.content.childCount==1?e.content.firstChild:null}function UNe(e,t){if(!e.dom.parentNode)return;let n=e.input.shiftKey||e.state.selection.$from.parent.type.spec.code,r=e.dom.parentNode.appendChild(document.createElement(n?`textarea`:`div`));n||(r.contentEditable=`true`),r.style.cssText=`position: fixed; left: -10000px; top: 10px`,r.focus();let i=e.input.shiftKey&&e.input.lastKeyCode!=45;setTimeout(()=>{e.focus(),r.parentNode&&r.parentNode.removeChild(r),n?XZ(e,r.value,null,i,t):XZ(e,r.textContent,r.innerHTML,i,t)},50)}function XZ(e,t,n,r,i){let a=wZ(e,t,n,r,e.state.selection.$from);if(e.someProp(`handlePaste`,t=>t(e,i,a||hq.empty)))return!0;if(!a)return!1;let o=HNe(a),s=o?e.state.tr.replaceSelectionWith(o,r):e.state.tr.replaceSelection(a);return e.dispatch(s.scrollIntoView().setMeta(`paste`,!0).setMeta(`uiEvent`,`paste`)),!0}function ZZ(e){let t=e.getData(`text/plain`)||e.getData(`Text`);if(t)return t;let n=e.getData(`text/uri-list`);return n?n.replace(/\r?\n/g,` `):``}PZ.paste=(e,t)=>{let n=t;if(e.composing&&!hX)return;let r=YZ?null:n.clipboardData,i=e.input.shiftKey&&e.input.lastKeyCode!=45;r&&XZ(e,ZZ(r),r.getData(`text/html`),i,n)?n.preventDefault():UNe(e,n)};var QZ=class{constructor(e,t,n){this.slice=e,this.move=t,this.node=n}},WNe=pX?`altKey`:`ctrlKey`;function $Z(e,t){let n;return e.someProp(`dragCopies`,e=>{n||=e(t)}),n==null?!t[WNe]:!n}NZ.dragstart=(e,t)=>{let n=t,r=e.input.mouseDown;if(r&&r.done(),!n.dataTransfer)return;let i=e.state.selection,a=i.empty?null:e.posAtCoords(RZ(n)),o;if(!(a&&a.pos>=i.from&&a.pos<=(i instanceof nY?i.to-1:i.to))){if(r&&r.mightDrag)o=nY.create(e.state.doc,r.mightDrag.pos);else if(n.target&&n.target.nodeType==1){let t=e.docView.nearestDesc(n.target,!0);t&&t.node.type.spec.draggable&&t!=e.docView&&(o=nY.create(e.state.doc,t.posBefore))}}let{dom:s,text:c,slice:l}=CZ(e,(o||e.state.selection).content());(!n.dataTransfer.files.length||!lX||uX>120)&&n.dataTransfer.clearData(),n.dataTransfer.setData(YZ?`Text`:`text/html`,s.innerHTML),n.dataTransfer.effectAllowed=`copyMove`,YZ||n.dataTransfer.setData(`text/plain`,c),e.dragging=new QZ(l,$Z(e,n),o)},NZ.dragend=e=>{let t=e.dragging;window.setTimeout(()=>{e.dragging==t&&(e.dragging=null)},50)},PZ.dragover=PZ.dragenter=(e,t)=>t.preventDefault(),PZ.drop=(e,t)=>{try{GNe(e,t,e.dragging)}finally{e.dragging=null}};function GNe(e,t,n){if(!t.dataTransfer)return;let r=e.posAtCoords(RZ(t));if(!r)return;let i=e.state.doc.resolve(r.pos),a=n&&n.slice;a?e.someProp(`transformPasted`,t=>{a=t(a,e,!1)}):a=wZ(e,ZZ(t.dataTransfer),YZ?null:t.dataTransfer.getData(`text/html`),!1,i);let o=!!(n&&$Z(e,t));if(e.someProp(`handleDrop`,n=>n(e,t,a||hq.empty,o))){t.preventDefault();return}if(!a)return;t.preventDefault();let s=a?FJ(e.state.doc,i.pos,a):i.pos;s??=i.pos;let c=e.state.tr;if(o){let{node:e}=n;e?e.replace(c):c.deleteSelection()}let l=c.mapping.map(s),u=a.openStart==0&&a.openEnd==0&&a.content.childCount==1,d=c.doc;if(u?c.replaceRangeWith(l,l,a.content.firstChild):c.replaceRange(l,l,a),c.doc.eq(d))return;let f=c.doc.resolve(l);if(u&&nY.isSelectable(a.content.firstChild)&&f.nodeAfter&&f.nodeAfter.sameMarkup(a.content.firstChild))c.setSelection(new nY(f));else{let t=c.mapping.map(s);c.mapping.maps[c.mapping.maps.length-1].forEach((e,n,r,i)=>t=i),c.setSelection(cZ(e,f,c.doc.resolve(t)))}e.focus(),e.dispatch(c.setMeta(`uiEvent`,`drop`))}NZ.focus=e=>{e.input.lastFocus=Date.now(),e.focused||(e.domObserver.stop(),e.dom.classList.add(`ProseMirror-focused`),e.domObserver.start(),e.focused=!0,setTimeout(()=>{e.docView&&e.hasFocus()&&!e.domObserver.currentSelection.eq(e.domSelectionRange())&&tZ(e)},20))},NZ.blur=(e,t)=>{let n=t;e.focused&&=(e.domObserver.stop(),e.dom.classList.remove(`ProseMirror-focused`),e.domObserver.start(),n.relatedTarget&&e.dom.contains(n.relatedTarget)&&e.domObserver.currentSelection.clear(),!1)},NZ.beforeinput=(e,t)=>{if(hX&&t.inputType==`deleteContentBackward`){e.domObserver.flushSoon();let{domChangeCount:t}=e.input;setTimeout(()=>{if(e.input.domChangeCount!=t||(e.dom.blur(),e.focus(),e.someProp(`handleKeyDown`,t=>t(e,QY(8,`Backspace`)))))return;let{$cursor:n}=e.state.selection;n&&n.pos>0&&e.dispatch(e.state.tr.delete(n.pos-1,n.pos).scrollIntoView())},50)}};for(let e in PZ)NZ[e]=PZ[e];function eQ(e,t){if(e==t)return!0;for(let n in e)if(e[n]!==t[n])return!1;for(let n in t)if(!(n in e))return!1;return!0}var tQ=class e{constructor(e,t){this.toDOM=e,this.spec=t||aQ,this.side=this.spec.side||0}map(e,t,n,r){let{pos:i,deleted:a}=e.mapResult(t.from+r,this.side<0?-1:1);return a?null:new rQ(i-n,i-n,this)}valid(){return!0}eq(t){return this==t||t instanceof e&&(this.spec.key&&this.spec.key==t.spec.key||this.toDOM==t.toDOM&&eQ(this.spec,t.spec))}destroy(e){this.spec.destroy&&this.spec.destroy(e)}},nQ=class e{constructor(e,t){this.attrs=e,this.spec=t||aQ}map(e,t,n,r){let i=e.map(t.from+r,this.spec.inclusiveStart?-1:1)-n,a=e.map(t.to+r,this.spec.inclusiveEnd?1:-1)-n;return i>=a?null:new rQ(i,a,this)}valid(e,t){return t.from<t.to}eq(t){return this==t||t instanceof e&&eQ(this.attrs,t.attrs)&&eQ(this.spec,t.spec)}static is(t){return t.type instanceof e}destroy(){}},KNe=class e{constructor(e,t){this.attrs=e,this.spec=t||aQ}map(e,t,n,r){let i=e.mapResult(t.from+r,1);if(i.deleted)return null;let a=e.mapResult(t.to+r,-1);return a.deleted||a.pos<=i.pos?null:new rQ(i.pos-n,a.pos-n,this)}valid(e,t){let{index:n,offset:r}=e.content.findIndex(t.from),i;return r==t.from&&!(i=e.child(n)).isText&&r+i.nodeSize==t.to}eq(t){return this==t||t instanceof e&&eQ(this.attrs,t.attrs)&&eQ(this.spec,t.spec)}destroy(){}},rQ=class e{constructor(e,t,n){this.from=e,this.to=t,this.type=n}copy(t,n){return new e(t,n,this.type)}eq(e,t=0){return this.type.eq(e.type)&&this.from+t==e.from&&this.to+t==e.to}map(e,t,n){return this.type.map(e,this,t,n)}static widget(t,n,r){return new e(t,t,new tQ(n,r))}static inline(t,n,r,i){return new e(t,n,new nQ(r,i))}static node(t,n,r,i){return new e(t,n,new KNe(r,i))}get spec(){return this.type.spec}get inline(){return this.type instanceof nQ}get widget(){return this.type instanceof tQ}},iQ=[],aQ={},oQ=class e{constructor(e,t){this.local=e.length?e:iQ,this.children=t.length?t:iQ}static create(e,t){return t.length?fQ(t,e,0,aQ):sQ}find(e,t,n){let r=[];return this.findInner(e??0,t??1e9,r,0,n),r}findInner(e,t,n,r,i){for(let a=0;a<this.local.length;a++){let o=this.local[a];o.from<=t&&o.to>=e&&(!i||i(o.spec))&&n.push(o.copy(o.from+r,o.to+r))}for(let a=0;a<this.children.length;a+=3)if(this.children[a]<t&&this.children[a+1]>e){let o=this.children[a]+1;this.children[a+2].findInner(e-o,t-o,n,r+o,i)}}map(e,t,n){return this==sQ||e.maps.length==0?this:this.mapInner(e,t,0,0,n||aQ)}mapInner(t,n,r,i,a){let o;for(let e=0;e<this.local.length;e++){let s=this.local[e].map(t,r,i);s&&s.type.valid(n,s)?(o||=[]).push(s):a.onRemove&&a.onRemove(this.local[e].spec)}return this.children.length?qNe(this.children,o||[],t,n,r,i,a):o?new e(o.sort(pQ),iQ):sQ}add(t,n){return n.length?this==sQ?e.create(t,n):this.addInner(t,n,0):this}addInner(t,n,r){let i,a=0;t.forEach((e,t)=>{let o=t+r,s;if(s=uQ(n,e,o)){for(i||=this.children.slice();a<i.length&&i[a]<t;)a+=3;i[a]==t?i[a+2]=i[a+2].addInner(e,s,o+1):i.splice(a,0,t,t+e.nodeSize,fQ(s,e,o+1,aQ)),a+=3}});let o=lQ(a?dQ(n):n,-r);for(let e=0;e<o.length;e++)o[e].type.valid(t,o[e])||o.splice(e--,1);return new e(o.length?this.local.concat(o).sort(pQ):this.local,i||this.children)}remove(e){return e.length==0||this==sQ?this:this.removeInner(e,0)}removeInner(t,n){let r=this.children,i=this.local;for(let e=0;e<r.length;e+=3){let i,a=r[e]+n,o=r[e+1]+n;for(let e=0,n;e<t.length;e++)(n=t[e])&&n.from>a&&n.to<o&&(t[e]=null,(i||=[]).push(n));if(!i)continue;r==this.children&&(r=this.children.slice());let s=r[e+2].removeInner(i,a+1);s==sQ?(r.splice(e,3),e-=3):r[e+2]=s}if(i.length){for(let e=0,r;e<t.length;e++)if(r=t[e])for(let e=0;e<i.length;e++)i[e].eq(r,n)&&(i==this.local&&(i=this.local.slice()),i.splice(e--,1))}return r==this.children&&i==this.local?this:i.length||r.length?new e(i,r):sQ}forChild(t,n){if(this==sQ)return this;if(n.isLeaf)return e.empty;let r,i;for(let e=0;e<this.children.length;e+=3)if(this.children[e]>=t){this.children[e]==t&&(r=this.children[e+2]);break}let a=t+1,o=a+n.content.size;for(let e=0;e<this.local.length;e++){let t=this.local[e];if(t.from<o&&t.to>a&&t.type instanceof nQ){let e=Math.max(a,t.from)-a,n=Math.min(o,t.to)-a;e<n&&(i||=[]).push(t.copy(e,n))}}if(i){let t=new e(i.sort(pQ),iQ);return r?new cQ([t,r]):t}return r||sQ}eq(t){if(this==t)return!0;if(!(t instanceof e)||this.local.length!=t.local.length||this.children.length!=t.children.length)return!1;for(let e=0;e<this.local.length;e++)if(!this.local[e].eq(t.local[e]))return!1;for(let e=0;e<this.children.length;e+=3)if(this.children[e]!=t.children[e]||this.children[e+1]!=t.children[e+1]||!this.children[e+2].eq(t.children[e+2]))return!1;return!0}locals(e){return mQ(this.localsInner(e))}localsInner(e){if(this==sQ)return iQ;if(e.inlineContent||!this.local.some(nQ.is))return this.local;let t=[];for(let e=0;e<this.local.length;e++)this.local[e].type instanceof nQ||t.push(this.local[e]);return t}forEachSet(e){e(this)}};oQ.empty=new oQ([],[]),oQ.removeOverlap=mQ;var sQ=oQ.empty,cQ=class e{constructor(e){this.members=e}map(t,n){let r=this.members.map(e=>e.map(t,n,aQ));return e.from(r)}forChild(t,n){if(n.isLeaf)return oQ.empty;let r=[];for(let i=0;i<this.members.length;i++){let a=this.members[i].forChild(t,n);a!=sQ&&(a instanceof e?r=r.concat(a.members):r.push(a))}return e.from(r)}eq(t){if(!(t instanceof e)||t.members.length!=this.members.length)return!1;for(let e=0;e<this.members.length;e++)if(!this.members[e].eq(t.members[e]))return!1;return!0}locals(e){let t,n=!0;for(let r=0;r<this.members.length;r++){let i=this.members[r].localsInner(e);if(i.length)if(!t)t=i;else{n&&=(t=t.slice(),!1);for(let e=0;e<i.length;e++)t.push(i[e])}}return t?mQ(n?t:t.sort(pQ)):iQ}static from(t){switch(t.length){case 0:return sQ;case 1:return t[0];default:return new e(t.every(e=>e instanceof oQ)?t:t.reduce((e,t)=>e.concat(t instanceof oQ?t:t.members),[]))}}forEachSet(e){for(let t=0;t<this.members.length;t++)this.members[t].forEachSet(e)}};function qNe(e,t,n,r,i,a,o){let s=e.slice();for(let e=0,t=a;e<n.maps.length;e++){let r=0;n.maps[e].forEach((e,n,i,a)=>{let o=a-i-(n-e);for(let i=0;i<s.length;i+=3){let a=s[i+1];if(a<0||e>a+t-r)continue;let c=s[i]+t-r;n>=c?s[i+1]=e<=c?-2:-1:e>=t&&o&&(s[i]+=o,s[i+1]+=o)}r+=o}),t=n.maps[e].map(t,-1)}let c=!1;for(let t=0;t<s.length;t+=3)if(s[t+1]<0){if(s[t+1]==-2){c=!0,s[t+1]=-1;continue}let l=n.map(e[t]+a),u=l-i;if(u<0||u>=r.content.size){c=!0;continue}let d=n.map(e[t+1]+a,-1)-i,{index:f,offset:p}=r.content.findIndex(u),m=r.maybeChild(f);if(m&&p==u&&p+m.nodeSize==d){let r=s[t+2].mapInner(n,m,l+1,e[t]+a+1,o);r==sQ?(s[t+1]=-2,c=!0):(s[t]=u,s[t+1]=d,s[t+2]=r)}else c=!0}if(c){let c=fQ(JNe(s,e,t,n,i,a,o),r,0,o);t=c.local;for(let e=0;e<s.length;e+=3)s[e+1]<0&&(s.splice(e,3),e-=3);for(let e=0,t=0;e<c.children.length;e+=3){let n=c.children[e];for(;t<s.length&&s[t]<n;)t+=3;s.splice(t,0,c.children[e],c.children[e+1],c.children[e+2])}}return new oQ(t.sort(pQ),s)}function lQ(e,t){if(!t||!e.length)return e;let n=[];for(let r=0;r<e.length;r++){let i=e[r];n.push(new rQ(i.from+t,i.to+t,i.type))}return n}function JNe(e,t,n,r,i,a,o){function s(e,t){for(let a=0;a<e.local.length;a++){let s=e.local[a].map(r,i,t);s?n.push(s):o.onRemove&&o.onRemove(e.local[a].spec)}for(let n=0;n<e.children.length;n+=3)s(e.children[n+2],e.children[n]+t+1)}for(let n=0;n<e.length;n+=3)e[n+1]==-1&&s(e[n+2],t[n]+a+1);return n}function uQ(e,t,n){if(t.isLeaf)return null;let r=n+t.nodeSize,i=null;for(let t=0,a;t<e.length;t++)(a=e[t])&&a.from>n&&a.to<r&&((i||=[]).push(a),e[t]=null);return i}function dQ(e){let t=[];for(let n=0;n<e.length;n++)e[n]!=null&&t.push(e[n]);return t}function fQ(e,t,n,r){let i=[],a=!1;t.forEach((t,o)=>{let s=uQ(e,t,o+n);if(s){a=!0;let e=fQ(s,t,n+o+1,r);e!=sQ&&i.push(o,o+t.nodeSize,e)}});let o=lQ(a?dQ(e):e,-n).sort(pQ);for(let e=0;e<o.length;e++)o[e].type.valid(t,o[e])||(r.onRemove&&r.onRemove(o[e].spec),o.splice(e--,1));return o.length||i.length?new oQ(o,i):sQ}function pQ(e,t){return e.from-t.from||e.to-t.to}function mQ(e){let t=e;for(let n=0;n<t.length-1;n++){let r=t[n];if(r.from!=r.to)for(let i=n+1;i<t.length;i++){let a=t[i];if(a.from==r.from){a.to!=r.to&&(t==e&&(t=e.slice()),t[i]=a.copy(a.from,r.to),hQ(t,i+1,a.copy(r.to,a.to)));continue}else{a.from<r.to&&(t==e&&(t=e.slice()),t[n]=r.copy(r.from,a.from),hQ(t,i,r.copy(a.from,r.to)));break}}}return t}function hQ(e,t,n){for(;t<e.length&&pQ(n,e[t])>0;)t++;e.splice(t,0,n)}function gQ(e){let t=[];return e.someProp(`decorations`,n=>{let r=n(e.state);r&&r!=sQ&&t.push(r)}),e.cursorWrapper&&t.push(oQ.create(e.state.doc,[e.cursorWrapper.deco])),cQ.from(t)}var YNe={childList:!0,characterData:!0,characterDataOldValue:!0,attributes:!0,attributeOldValue:!0,subtree:!0},XNe=aX&&oX<=11,ZNe=class{constructor(){this.anchorNode=null,this.anchorOffset=0,this.focusNode=null,this.focusOffset=0}set(e){this.anchorNode=e.anchorNode,this.anchorOffset=e.anchorOffset,this.focusNode=e.focusNode,this.focusOffset=e.focusOffset}clear(){this.anchorNode=this.focusNode=null}eq(e){return e.anchorNode==this.anchorNode&&e.anchorOffset==this.anchorOffset&&e.focusNode==this.focusNode&&e.focusOffset==this.focusOffset}},QNe=class{constructor(e,t){this.view=e,this.handleDOMChange=t,this.queue=[],this.flushingSoon=-1,this.observer=null,this.currentSelection=new ZNe,this.onCharData=null,this.suppressingSelectionUpdates=!1,this.lastChangedTextNode=null,this.observer=window.MutationObserver&&new window.MutationObserver(t=>{for(let e=0;e<t.length;e++)this.queue.push(t[e]);aX&&oX<=11&&t.some(e=>e.type==`childList`&&e.removedNodes.length||e.type==`characterData`&&e.oldValue.length>e.target.nodeValue.length)?this.flushSoon():dX&&e.composing&&t.some(e=>e.type==`childList`&&e.target.nodeName==`TR`)?(e.input.badSafariComposition=!0,this.flushSoon()):this.flush()}),XNe&&(this.onCharData=e=>{this.queue.push({target:e.target,type:`characterData`,oldValue:e.prevValue}),this.flushSoon()}),this.onSelectionChange=this.onSelectionChange.bind(this)}flushSoon(){this.flushingSoon<0&&(this.flushingSoon=window.setTimeout(()=>{this.flushingSoon=-1,this.flush()},20))}forceFlush(){this.flushingSoon>-1&&(window.clearTimeout(this.flushingSoon),this.flushingSoon=-1,this.flush())}start(){this.observer&&(this.observer.takeRecords(),this.observer.observe(this.view.dom,YNe)),this.onCharData&&this.view.dom.addEventListener(`DOMCharacterDataModified`,this.onCharData),this.connectSelection()}stop(){if(this.observer){let e=this.observer.takeRecords();if(e.length){for(let t=0;t<e.length;t++)this.queue.push(e[t]);window.setTimeout(()=>this.flush(),20)}this.observer.disconnect()}this.onCharData&&this.view.dom.removeEventListener(`DOMCharacterDataModified`,this.onCharData),this.disconnectSelection()}connectSelection(){this.view.dom.ownerDocument.addEventListener(`selectionchange`,this.onSelectionChange)}disconnectSelection(){this.view.dom.ownerDocument.removeEventListener(`selectionchange`,this.onSelectionChange)}suppressSelectionUpdates(){this.suppressingSelectionUpdates=!0,setTimeout(()=>this.suppressingSelectionUpdates=!1,50)}onSelectionChange(){if(lZ(this.view)){if(this.suppressingSelectionUpdates)return tZ(this.view);if(aX&&oX<=11&&!this.view.state.selection.empty){let e=this.view.domSelectionRange();if(e.focusNode&&qY(e.focusNode,e.focusOffset,e.anchorNode,e.anchorOffset))return this.flushSoon()}this.flush()}}setCurSelection(){this.currentSelection.set(this.view.domSelectionRange())}ignoreSelectionChange(e){if(!e.focusNode)return!0;let t=new Set,n;for(let n=e.focusNode;n;n=WY(n))t.add(n);for(let r=e.anchorNode;r;r=WY(r))if(t.has(r)){n=r;break}let r=n&&this.view.docView.nearestDesc(n);if(r&&r.ignoreMutation({type:`selection`,target:n.nodeType==3?n.parentNode:n}))return this.setCurSelection(),!0}pendingRecords(){if(this.observer)for(let e of this.observer.takeRecords())this.queue.push(e);return this.queue}flush(){let{view:e}=this;if(!e.docView||this.flushingSoon>-1)return;let t=this.pendingRecords();t.length&&(this.queue=[]);let n=e.domSelectionRange(),r=!this.suppressingSelectionUpdates&&!this.currentSelection.eq(n)&&lZ(e)&&!this.ignoreSelectionChange(n),i=-1,a=-1,o=!1,s=[];if(e.editable)for(let e=0;e<t.length;e++){let n=this.registerMutation(t[e],s);n&&(i=i<0?n.from:Math.min(n.from,i),a=a<0?n.to:Math.max(n.to,a),n.typeOver&&(o=!0))}if(s.some(e=>e.nodeName==`BR`)&&(e.input.lastKeyCode==8||e.input.lastKeyCode==46||lX&&(e.composing||e.input.compositionEndedAt>Date.now()-50)&&t.some(e=>e.type==`childList`&&e.removedNodes.length))){for(let e of s)if(e.nodeName==`BR`&&e.parentNode){let t=e.nextSibling;for(;t&&t.nodeType==1;){if(t.contentEditable==`false`){e.parentNode.removeChild(e);break}t=t.firstChild}}}else if(sX&&s.length){let t=s.filter(e=>e.nodeName==`BR`);if(t.length==2){let[e,n]=t;e.parentNode&&e.parentNode.parentNode==n.parentNode?n.remove():e.remove()}else{let{focusNode:n}=this.currentSelection;for(let r of t){let t=r.parentNode;t&&t.nodeName==`LI`&&(!n||tPe(e,n)!=t)&&r.remove()}}}let c=null;i<0&&r&&e.input.lastFocus>Date.now()-200&&Math.max(e.input.lastTouch,e.input.lastClick.time)<Date.now()-300&&ZY(n)&&(c=$X(e))&&c.eq(ZJ.near(e.state.doc.resolve(0),1))?(e.input.lastFocus=0,tZ(e),this.currentSelection.set(n),e.scrollToSelection()):(i>-1||r)&&(i>-1&&(e.docView.markDirty(i,a),$Ne(e)),e.input.badSafariComposition&&(e.input.badSafariComposition=!1,nPe(e,s)),this.handleDOMChange(i,a,o,s),e.docView&&e.docView.dirty?e.updateState(e.state):this.currentSelection.eq(n)||tZ(e),this.currentSelection.set(n))}registerMutation(e,t){if(t.indexOf(e.target)>-1)return null;let n=this.view.docView.nearestDesc(e.target);if(e.type==`attributes`&&(n==this.view.docView||e.attributeName==`contenteditable`||e.attributeName==`style`&&!e.oldValue&&!e.target.getAttribute(`style`))||!n||n.ignoreMutation(e))return null;if(e.type==`childList`){for(let n=0;n<e.addedNodes.length;n++){let r=e.addedNodes[n];t.push(r),r.nodeType==3&&(this.lastChangedTextNode=r)}if(n.contentDOM&&n.contentDOM!=n.dom&&!n.contentDOM.contains(e.target))return{from:n.posBefore,to:n.posAfter};let r=e.previousSibling,i=e.nextSibling;if(aX&&oX<=11&&e.addedNodes.length)for(let t=0;t<e.addedNodes.length;t++){let{previousSibling:n,nextSibling:a}=e.addedNodes[t];(!n||Array.prototype.indexOf.call(e.addedNodes,n)<0)&&(r=n),(!a||Array.prototype.indexOf.call(e.addedNodes,a)<0)&&(i=a)}let a=r&&r.parentNode==e.target?UY(r)+1:0,o=n.localPosFromDOM(e.target,a,-1),s=i&&i.parentNode==e.target?UY(i):e.target.childNodes.length;return{from:o,to:n.localPosFromDOM(e.target,s,1)}}else if(e.type==`attributes`)return{from:n.posAtStart-n.border,to:n.posAtEnd+n.border};else return this.lastChangedTextNode=e.target,{from:n.posAtStart,to:n.posAtEnd,typeOver:e.target.nodeValue==e.oldValue}}},_Q=new WeakMap,vQ=!1;function $Ne(e){if(!_Q.has(e)&&(_Q.set(e,null),[`normal`,`nowrap`,`pre-line`].indexOf(getComputedStyle(e.dom).whiteSpace)!==-1)){if(e.requiresGeckoHackNode=sX,vQ)return;console.warn(`ProseMirror expects the CSS white-space property to be set, preferably to 'pre-wrap'. It is recommended to load style/prosemirror.css from the prosemirror-view package.`),vQ=!0}}function yQ(e,t){let n=t.startContainer,r=t.startOffset,i=t.endContainer,a=t.endOffset,o=e.domAtPos(e.state.selection.anchor);return qY(o.node,o.offset,i,a)&&([n,r,i,a]=[i,a,n,r]),{anchorNode:n,anchorOffset:r,focusNode:i,focusOffset:a}}function ePe(e,t){if(t.getComposedRanges){let n=t.getComposedRanges(e.root)[0];if(n)return yQ(e,n)}let n;function r(e){e.preventDefault(),e.stopImmediatePropagation(),n=e.getTargetRanges()[0]}return e.dom.addEventListener(`beforeinput`,r,!0),document.execCommand(`indent`),e.dom.removeEventListener(`beforeinput`,r,!0),n?yQ(e,n):null}function tPe(e,t){for(let n=t.parentNode;n&&n!=e.dom;n=n.parentNode){let t=e.docView.nearestDesc(n,!0);if(t&&t.node.isBlock)return n}return null}function nPe(e,t){let{focusNode:n,focusOffset:r}=e.domSelectionRange();for(let i of t)if(i.parentNode?.nodeName==`TR`){let t=i.nextSibling;for(;t&&t.nodeName!=`TD`&&t.nodeName!=`TH`;)t=t.nextSibling;if(t){let a=t;for(;;){let e=a.firstChild;if(!e||e.nodeType!=1||e.contentEditable==`false`||/^(BR|IMG)$/.test(e.nodeName))break;a=e}a.insertBefore(i,a.firstChild),n==i&&e.domSelection().collapse(i,r)}else i.parentNode.removeChild(i)}}function rPe(e,t,n,r){let{node:i,fromOffset:a,toOffset:o,from:s,to:c}=e.docView.parseRange(t,n),l=e.domSelectionRange(),u,d=l.anchorNode;if(d&&e.dom.contains(d.nodeType==1?d:d.parentNode)&&(u=[{node:d,offset:l.anchorOffset}],ZY(l)||u.push({node:l.focusNode,offset:l.focusOffset})),lX&&e.input.lastKeyCode===8)for(let e=o;e>a;e--){let t=i.childNodes[e-1],n=t.pmViewDesc;if(t.nodeName==`BR`&&!n){o=e;break}if(!n||n.size)break}let f=e.state.doc,p=e.someProp(`domParser`)||Wq.fromSchema(e.state.schema),m=f.resolve(s),h=null,g=p.parse(i,{topNode:m.parent,topMatch:m.parent.contentMatchAt(m.index()),topOpen:!0,from:a,to:o,preserveWhitespace:m.parent.type.whitespace==`pre`?`full`:!0,findPositions:u,ruleFromNode:iPe(r),context:m});if(u&&u[0].pos!=null){let e=u[0].pos,t=u[1]&&u[1].pos;t??=e,h={anchor:e+s,head:t+s}}return{doc:g,sel:h,from:s,to:c}}var iPe=e=>t=>{let n=t.pmViewDesc;if(n)return n.parseRule(e);if(t.nodeName==`BR`&&t.parentNode){if(dX&&/^(ul|ol)$/i.test(t.parentNode.nodeName)){let e=document.createElement(`div`);return e.appendChild(document.createElement(`li`)),{skip:e}}else if(t.parentNode.lastChild==t||dX&&/^(tr|table)$/i.test(t.parentNode.nodeName))return{ignore:!0}}else if(t.nodeName==`IMG`&&t.getAttribute(`mark-placeholder`))return{ignore:!0};return null},aPe=/^(a|abbr|acronym|b|bd[io]|big|br|button|cite|code|data(list)?|del|dfn|em|i|img|ins|kbd|label|map|mark|meter|output|q|ruby|s|samp|small|span|strong|su[bp]|time|u|tt|var)$/i;function oPe(e,t,n,r,i){let a=e.input.compositionPendingChanges||(e.composing?e.input.compositionID:0);if(e.input.compositionPendingChanges=0,t<0){let t=e.input.lastSelectionTime>Date.now()-50?e.input.lastSelectionOrigin:null,n=$X(e,t);if(n&&!e.state.selection.eq(n)){if(lX&&hX&&e.input.lastKeyCode===13&&Date.now()-100<e.input.lastKeyCodeTime&&e.someProp(`handleKeyDown`,t=>t(e,QY(13,`Enter`))))return;let r=e.state.tr.setSelection(n);t==`pointer`?r.setMeta(`pointer`,!0):t==`key`&&r.scrollIntoView(),a&&r.setMeta(`composition`,a),e.dispatch(r)}return}let o=e.state.doc.resolve(t),s=o.sharedDepth(n);t=o.before(s+1),n=e.state.doc.resolve(n).after(s+1);let c=e.state.selection,l=rPe(e,t,n,i),u=e.state.doc,d=u.slice(l.from,l.to),f,p;e.input.lastKeyCode===8&&Date.now()-100<e.input.lastKeyCodeTime?(f=e.state.selection.to,p=`end`):(f=e.state.selection.from,p=`start`),e.input.lastKeyCode=null;let m=lPe(d.content,l.doc.content,l.from,f,p);if(m&&e.input.domChangeCount++,(fX&&e.input.lastIOSEnter>Date.now()-225||hX)&&i.some(e=>e.nodeType==1&&!aPe.test(e.nodeName))&&(!m||m.endA>=m.endB)&&e.someProp(`handleKeyDown`,t=>t(e,QY(13,`Enter`)))){e.input.lastIOSEnter=0;return}if(!m)if(r&&c instanceof eY&&!c.empty&&c.$head.sameParent(c.$anchor)&&!e.composing&&!(l.sel&&l.sel.anchor!=l.sel.head))m={start:c.from,endA:c.to,endB:c.to};else{if(l.sel){let t=bQ(e,e.state.doc,l.sel);if(t&&!t.eq(e.state.selection)){let n=e.state.tr.setSelection(t);a&&n.setMeta(`composition`,a),e.dispatch(n)}}return}e.state.selection.from<e.state.selection.to&&m.start==m.endB&&e.state.selection instanceof eY&&(m.start>e.state.selection.from&&m.start<=e.state.selection.from+2&&e.state.selection.from>=l.from?m.start=e.state.selection.from:m.endA<e.state.selection.to&&m.endA>=e.state.selection.to-2&&e.state.selection.to<=l.to&&(m.endB+=e.state.selection.to-m.endA,m.endA=e.state.selection.to)),aX&&oX<=11&&m.endB==m.start+1&&m.endA==m.start&&m.start>l.from&&l.doc.textBetween(m.start-l.from-1,m.start-l.from+1)==` \xA0`&&(m.start--,m.endA--,m.endB--);let h=l.doc.resolveNoCache(m.start-l.from),g=l.doc.resolveNoCache(m.endB-l.from),_=u.resolve(m.start),v=h.sameParent(g)&&h.parent.inlineContent&&_.end()>=m.endA;if((fX&&e.input.lastIOSEnter>Date.now()-225&&(!v||i.some(e=>e.nodeName==`DIV`||e.nodeName==`P`))||!v&&h.pos<l.doc.content.size&&(!h.sameParent(g)||!h.parent.inlineContent)&&h.pos<g.pos&&!/\S/.test(l.doc.textBetween(h.pos,g.pos,``,``)))&&e.someProp(`handleKeyDown`,t=>t(e,QY(13,`Enter`)))){e.input.lastIOSEnter=0;return}if(e.state.selection.anchor>m.start&&cPe(u,m.start,m.endA,h,g)&&e.someProp(`handleKeyDown`,t=>t(e,QY(8,`Backspace`)))){hX&&lX&&e.domObserver.suppressSelectionUpdates();return}lX&&m.endB==m.start&&(e.input.lastChromeDelete=Date.now()),hX&&!v&&h.start()!=g.start()&&g.parentOffset==0&&h.depth==g.depth&&l.sel&&l.sel.anchor==l.sel.head&&l.sel.head==m.endA&&(m.endB-=2,g=l.doc.resolveNoCache(m.endB-l.from),setTimeout(()=>{e.someProp(`handleKeyDown`,function(t){return t(e,QY(13,`Enter`))})},20));let y=m.start,b=m.endA,x=t=>{let n=t||e.state.tr.replace(y,b,l.doc.slice(m.start-l.from,m.endB-l.from));if(l.sel){let t=bQ(e,n.doc,l.sel);t&&!(lX&&e.composing&&t.empty&&(m.start!=m.endB||e.input.lastChromeDelete<Date.now()-100)&&(t.head==y||t.head==n.mapping.map(b)-1)||aX&&t.empty&&t.head==y)&&n.setSelection(t)}return a&&n.setMeta(`composition`,a),n.scrollIntoView()},S;if(v)if(h.pos==g.pos){aX&&oX<=11&&h.parentOffset==0&&(e.domObserver.suppressSelectionUpdates(),setTimeout(()=>tZ(e),20));let t=x(e.state.tr.delete(y,b)),n=u.resolve(m.start).marksAcross(u.resolve(m.endA));n&&t.ensureMarks(n),e.dispatch(t)}else if(m.endA==m.endB&&(S=sPe(h.parent.content.cut(h.parentOffset,g.parentOffset),_.parent.content.cut(_.parentOffset,m.endA-_.start())))){let t=x(e.state.tr);S.type==`add`?t.addMark(y,b,S.mark):t.removeMark(y,b,S.mark),e.dispatch(t)}else if(h.parent.child(h.index()).isText&&h.index()==g.index()-+!g.textOffset){let t=h.parent.textBetween(h.parentOffset,g.parentOffset),n=()=>x(e.state.tr.insertText(t,y,b));e.someProp(`handleTextInput`,r=>r(e,y,b,t,n))||e.dispatch(n())}else e.dispatch(x());else e.dispatch(x())}function bQ(e,t,n){return Math.max(n.anchor,n.head)>t.content.size?null:cZ(e,t.resolve(n.anchor),t.resolve(n.head))}function sPe(e,t){let n=e.firstChild.marks,r=t.firstChild.marks,i=n,a=r,o,s,c;for(let e=0;e<r.length;e++)i=r[e].removeFromSet(i);for(let e=0;e<n.length;e++)a=n[e].removeFromSet(a);if(i.length==1&&a.length==0)s=i[0],o=`add`,c=e=>e.mark(s.addToSet(e.marks));else if(i.length==0&&a.length==1)s=a[0],o=`remove`,c=e=>e.mark(s.removeFromSet(e.marks));else return null;let l=[];for(let e=0;e<t.childCount;e++)l.push(c(t.child(e)));if(lq.from(l).eq(e))return{mark:s,type:o}}function cPe(e,t,n,r,i){if(n-t<=i.pos-r.pos||xQ(r,!0,!1)<i.pos)return!1;let a=e.resolve(t);if(!r.parent.isTextblock){let e=a.nodeAfter;return e!=null&&n==t+e.nodeSize}if(a.parentOffset<a.parent.content.size||!a.parent.isTextblock)return!1;let o=e.resolve(xQ(a,!0,!0));return!o.parent.isTextblock||o.pos>n||xQ(o,!0,!1)<n?!1:r.parent.content.cut(r.parentOffset).eq(o.parent.content)}function xQ(e,t,n){let r=e.depth,i=t?e.end():e.pos;for(;r>0&&(t||e.indexAfter(r)==e.node(r).childCount);)r--,i++,t=!1;if(n){let t=e.node(r).maybeChild(e.indexAfter(r));for(;t&&!t.isLeaf;)t=t.firstChild,i++}return i}function lPe(e,t,n,r,i){let a=e.findDiffStart(t,n),o=n+e.size,s=n+t.size;if(a==null)return null;let{a:c,b:l}=e.findDiffEnd(t,o,s);if(i==`end`){let e=Math.max(0,a-Math.min(c,l));r-=c+e-a}if(c<a&&o<s){let e=r<=a&&r>=c?a-r:0;a-=e,l=a+(l-c),c=a}else if(l<a){let e=r<=a&&r>=l?a-r:0;a-=e,c=a+(c-l),l=a}return{start:a,endA:c,endB:l}}var SQ=class{constructor(e,t){this._root=null,this.focused=!1,this.trackWrites=null,this.mounted=!1,this.markCursor=null,this.cursorWrapper=null,this.lastSelectedViewDesc=void 0,this.input=new wNe,this.prevDirectPlugins=[],this.pluginViews=[],this.requiresGeckoHackNode=!1,this.dragging=null,this._props=t,this.state=t.state,this.directPlugins=t.plugins||[],this.directPlugins.forEach(DQ),this.dispatch=this.dispatch.bind(this),this.dom=e&&e.mount||document.createElement(`div`),e&&(e.appendChild?e.appendChild(this.dom):typeof e==`function`?e(this.dom):e.mount&&(this.mounted=!0)),this.editable=TQ(this),wQ(this),this.nodeViews=EQ(this),this.docView=HX(this.state.doc,CQ(this),gQ(this),this.dom,this),this.domObserver=new QNe(this,(e,t,n,r)=>oPe(this,e,t,n,r)),this.domObserver.start(),TNe(this),this.updatePluginViews()}get composing(){return this.input.composing}get props(){if(this._props.state!=this.state){let e=this._props;this._props={};for(let t in e)this._props[t]=e[t];this._props.state=this.state}return this._props}update(e){e.handleDOMEvents!=this._props.handleDOMEvents&&IZ(this);let t=this._props;this._props=e,e.plugins&&(e.plugins.forEach(DQ),this.directPlugins=e.plugins),this.updateStateInner(e.state,t)}setProps(e){let t={};for(let e in this._props)t[e]=this._props[e];t.state=this.state;for(let n in e)t[n]=e[n];this.update(t)}updateState(e){this.updateStateInner(e,this._props)}updateStateInner(e,t){let n=this.state,r=!1,i=!1;e.storedMarks&&this.composing&&(qZ(this),i=!0),this.state=e;let a=n.plugins!=e.plugins||this._props.plugins!=t.plugins;if(a||this._props.plugins!=t.plugins||this._props.nodeViews!=t.nodeViews){let e=EQ(this);dPe(e,this.nodeViews)&&(this.nodeViews=e,r=!0)}(a||t.handleDOMEvents!=this._props.handleDOMEvents)&&IZ(this),this.editable=TQ(this),wQ(this);let o=gQ(this),s=CQ(this),c=n.plugins!=e.plugins&&!n.doc.eq(e.doc)?`reset`:e.scrollToSelection>n.scrollToSelection?`to selection`:`preserve`,l=r||!this.docView.matchesNode(e.doc,s,o);(l||!e.selection.eq(n.selection))&&(i=!0);let u=c==`preserve`&&i&&this.dom.style.overflowAnchor==null&&RMe(this);if(i){this.domObserver.stop();let t=l&&(aX||lX)&&!this.composing&&!n.selection.empty&&!e.selection.empty&&uPe(n.selection,e.selection);if(l){let n=lX?this.trackWrites=this.domSelectionRange().focusNode:null;this.composing&&(this.input.compositionNode=BNe(this)),(r||!this.docView.update(e.doc,s,o,this))&&(this.docView.updateOuterDeco(s),this.docView.destroy(),this.docView=HX(e.doc,s,o,this.dom,this)),n&&(!this.trackWrites||!this.dom.contains(this.trackWrites))&&(t=!0)}let i=this.input.mouseDown;t||!(i&&this.domObserver.currentSelection.eq(this.domSelectionRange())&&lNe(this)&&i.delaySelUpdate())?tZ(this,t):(oZ(this,e.selection),this.domObserver.setCurSelection()),this.domObserver.start()}this.updatePluginViews(n),this.dragging?.node&&!n.doc.eq(e.doc)&&this.updateDraggedNode(this.dragging,n),c==`reset`?this.dom.scrollTop=0:c==`to selection`?this.scrollToSelection():u&&zMe(u)}scrollToSelection(){let e=this.domSelectionRange().focusNode;if(!(!e||!this.dom.contains(e.nodeType==1?e:e.parentNode))&&!this.someProp(`handleScrollToSelection`,e=>e(this)))if(this.state.selection instanceof nY){let t=this.docView.domAfterPos(this.state.selection.from);t.nodeType==1&&vX(this,t.getBoundingClientRect(),e)}else vX(this,this.coordsAtPos(this.state.selection.head,1),e)}destroyPluginViews(){let e;for(;e=this.pluginViews.pop();)e.destroy&&e.destroy()}updatePluginViews(e){if(!e||e.plugins!=this.state.plugins||this.directPlugins!=this.prevDirectPlugins){this.prevDirectPlugins=this.directPlugins,this.destroyPluginViews();for(let e=0;e<this.directPlugins.length;e++){let t=this.directPlugins[e];t.spec.view&&this.pluginViews.push(t.spec.view(this))}for(let e=0;e<this.state.plugins.length;e++){let t=this.state.plugins[e];t.spec.view&&this.pluginViews.push(t.spec.view(this))}}else for(let t=0;t<this.pluginViews.length;t++){let n=this.pluginViews[t];n.update&&n.update(this,e)}}updateDraggedNode(e,t){let n=e.node,r=-1;if(n.from<this.state.doc.content.size&&this.state.doc.nodeAt(n.from)==n.node)r=n.from;else{let e=n.from+(this.state.doc.content.size-t.doc.content.size);(e>0&&e<this.state.doc.content.size&&this.state.doc.nodeAt(e))==n.node&&(r=e)}this.dragging=new QZ(e.slice,e.move,r<0?void 0:nY.create(this.state.doc,r))}someProp(e,t){let n=this._props&&this._props[e],r;if(n!=null&&(r=t?t(n):n))return r;for(let n=0;n<this.directPlugins.length;n++){let i=this.directPlugins[n].props[e];if(i!=null&&(r=t?t(i):i))return r}let i=this.state.plugins;if(i)for(let n=0;n<i.length;n++){let a=i[n].props[e];if(a!=null&&(r=t?t(a):a))return r}}hasFocus(){if(aX){let e=this.root.activeElement;if(e==this.dom)return!0;if(!e||!this.dom.contains(e))return!1;for(;e&&this.dom!=e&&this.dom.contains(e);){if(e.contentEditable==`false`)return!1;e=e.parentElement}return!0}return this.root.activeElement==this.dom}focus(){this.domObserver.stop(),this.editable&&BMe(this.dom),tZ(this),this.domObserver.start()}get root(){let e=this._root;if(e==null){for(let e=this.dom.parentNode;e;e=e.parentNode)if(e.nodeType==9||e.nodeType==11&&e.host)return e.getSelection||(Object.getPrototypeOf(e).getSelection=()=>e.ownerDocument.getSelection()),this._root=e}return e||document}updateRoot(){this._root=null}posAtCoords(e){return GMe(this,e)}coordsAtPos(e,t=1){return DX(this,e,t)}domAtPos(e,t=0){return this.docView.domFromPos(e,t)}nodeDOM(e){let t=this.docView.descAt(e);return t?t.nodeDOM:null}posAtDOM(e,t,n=-1){let r=this.docView.posFromDOM(e,t,n);if(r==null)throw RangeError(`DOM position not inside the editor`);return r}endOfTextblock(e,t){return XMe(this,t||this.state,e)}pasteHTML(e,t){return XZ(this,``,e,!1,t||new ClipboardEvent(`paste`))}pasteText(e,t){return XZ(this,e,null,!0,t||new ClipboardEvent(`paste`))}serializeForClipboard(e){return CZ(this,e)}destroy(){this.docView&&(ENe(this),this.destroyPluginViews(),this.mounted?(this.docView.update(this.state.doc,[],gQ(this),this),this.dom.textContent=``):this.dom.parentNode&&this.dom.parentNode.removeChild(this.dom),this.docView.destroy(),this.docView=null,OMe())}get isDestroyed(){return this.docView==null}dispatchEvent(e){return ONe(this,e)}domSelectionRange(){let e=this.domSelection();return e?dX&&this.root.nodeType===11&&NMe(this.dom.ownerDocument)==this.dom&&ePe(this,e)||e:{focusNode:null,focusOffset:0,anchorNode:null,anchorOffset:0}}domSelection(){return this.root.getSelection()}};SQ.prototype.dispatch=function(e){let t=this._props.dispatchTransaction;t?t.call(this,e):this.updateState(this.state.apply(e))};function CQ(e){let t=Object.create(null);return t.class=`ProseMirror`,t.contenteditable=String(e.editable),e.someProp(`attributes`,n=>{if(typeof n==`function`&&(n=n(e.state)),n)for(let e in n)e==`class`?t.class+=` `+n[e]:e==`style`?t.style=(t.style?t.style+`;`:``)+n[e]:!t[e]&&e!=`contenteditable`&&e!=`nodeName`&&(t[e]=String(n[e]))}),t.translate||=`no`,[rQ.node(0,e.state.doc.content.size,t)]}function wQ(e){if(e.markCursor){let t=document.createElement(`img`);t.className=`ProseMirror-separator`,t.setAttribute(`mark-placeholder`,`true`),t.setAttribute(`alt`,``),e.cursorWrapper={dom:t,deco:rQ.widget(e.state.selection.from,t,{raw:!0,marks:e.markCursor})}}else e.cursorWrapper=null}function TQ(e){return!e.someProp(`editable`,t=>t(e.state)===!1)}function uPe(e,t){let n=Math.min(e.$anchor.sharedDepth(e.head),t.$anchor.sharedDepth(t.head));return e.$anchor.start(n)!=t.$anchor.start(n)}function EQ(e){let t=Object.create(null);function n(e){for(let n in e)Object.prototype.hasOwnProperty.call(t,n)||(t[n]=e[n])}return e.someProp(`nodeViews`,n),e.someProp(`markViews`,n),t}function dPe(e,t){let n=0,r=0;for(let r in e){if(e[r]!=t[r])return!0;n++}for(let e in t)r++;return n!=r}function DQ(e){if(e.spec.state||e.spec.filterTransaction||e.spec.appendTransaction)throw RangeError(`Plugins passed directly to the view must not have a state component`)}for(var OQ={8:`Backspace`,9:`Tab`,10:`Enter`,12:`NumLock`,13:`Enter`,16:`Shift`,17:`Control`,18:`Alt`,20:`CapsLock`,27:`Escape`,32:` `,33:`PageUp`,34:`PageDown`,35:`End`,36:`Home`,37:`ArrowLeft`,38:`ArrowUp`,39:`ArrowRight`,40:`ArrowDown`,44:`PrintScreen`,45:`Insert`,46:`Delete`,59:`;`,61:`=`,91:`Meta`,92:`Meta`,106:`*`,107:`+`,108:`,`,109:`-`,110:`.`,111:`/`,144:`NumLock`,145:`ScrollLock`,160:`Shift`,161:`Shift`,162:`Control`,163:`Control`,164:`Alt`,165:`Alt`,173:`-`,186:`;`,187:`=`,188:`,`,189:`-`,190:`.`,191:`/`,192:"`",219:`[`,220:`\\`,221:`]`,222:`'`},kQ={48:`)`,49:`!`,50:`@`,51:`#`,52:`$`,53:`%`,54:`^`,55:`&`,56:`*`,57:`(`,59:`:`,61:`+`,173:`_`,186:`:`,187:`+`,188:`<`,189:`_`,190:`>`,191:`?`,192:`~`,219:`{`,220:`|`,221:`}`,222:`"`},fPe=typeof navigator<`u`&&/Mac/.test(navigator.platform),pPe=typeof navigator<`u`&&/MSIE \d|Trident\/(?:[7-9]|\d{2,})\..*rv:(\d+)/.exec(navigator.userAgent),AQ=0;AQ<10;AQ++)OQ[48+AQ]=OQ[96+AQ]=String(AQ);for(var AQ=1;AQ<=24;AQ++)OQ[AQ+111]=`F`+AQ;for(var AQ=65;AQ<=90;AQ++)OQ[AQ]=String.fromCharCode(AQ+32),kQ[AQ]=String.fromCharCode(AQ);for(var jQ in OQ)kQ.hasOwnProperty(jQ)||(kQ[jQ]=OQ[jQ]);function mPe(e){var t=!(fPe&&e.metaKey&&e.shiftKey&&!e.ctrlKey&&!e.altKey||pPe&&e.shiftKey&&e.key&&e.key.length==1||e.key==`Unidentified`)&&e.key||(e.shiftKey?kQ:OQ)[e.keyCode]||e.key||`Unidentified`;return t==`Esc`&&(t=`Escape`),t==`Del`&&(t=`Delete`),t==`Left`&&(t=`ArrowLeft`),t==`Up`&&(t=`ArrowUp`),t==`Right`&&(t=`ArrowRight`),t==`Down`&&(t=`ArrowDown`),t}var hPe=typeof navigator<`u`&&/Mac|iP(hone|[oa]d)/.test(navigator.platform),gPe=typeof navigator<`u`&&/Win/.test(navigator.platform);function _Pe(e){let t=e.split(/-(?!$)/),n=t[t.length-1];n==`Space`&&(n=` `);let r,i,a,o;for(let e=0;e<t.length-1;e++){let n=t[e];if(/^(cmd|meta|m)$/i.test(n))o=!0;else if(/^a(lt)?$/i.test(n))r=!0;else if(/^(c|ctrl|control)$/i.test(n))i=!0;else if(/^s(hift)?$/i.test(n))a=!0;else if(/^mod$/i.test(n))hPe?o=!0:i=!0;else throw Error(`Unrecognized modifier name: `+n)}return r&&(n=`Alt-`+n),i&&(n=`Ctrl-`+n),o&&(n=`Meta-`+n),a&&(n=`Shift-`+n),n}function vPe(e){let t=Object.create(null);for(let n in e)t[_Pe(n)]=e[n];return t}function MQ(e,t,n=!0){return t.altKey&&(e=`Alt-`+e),t.ctrlKey&&(e=`Ctrl-`+e),t.metaKey&&(e=`Meta-`+e),n&&t.shiftKey&&(e=`Shift-`+e),e}function yPe(e){return new mY({props:{handleKeyDown:NQ(e)}})}function NQ(e){let t=vPe(e);return function(e,n){let r=mPe(n),i,a=t[MQ(r,n)];if(a&&a(e.state,e.dispatch,e))return!0;if(r.length==1&&r!=` `){if(n.shiftKey){let i=t[MQ(r,n,!1)];if(i&&i(e.state,e.dispatch,e))return!0}if((n.altKey||n.metaKey||n.ctrlKey)&&!(gPe&&n.ctrlKey&&n.altKey)&&(i=OQ[n.keyCode])&&i!=r){let r=t[MQ(i,n)];if(r&&r(e.state,e.dispatch,e))return!0}}return!1}}function PQ(e){let{state:t,transaction:n}=e,{selection:r}=n,{doc:i}=n,{storedMarks:a}=n;return{...t,apply:t.apply.bind(t),applyTransaction:t.applyTransaction.bind(t),plugins:t.plugins,schema:t.schema,reconfigure:t.reconfigure.bind(t),toJSON:t.toJSON.bind(t),get storedMarks(){return a},get selection(){return r},get doc(){return i},get tr(){return r=n.selection,i=n.doc,a=n.storedMarks,n}}}var FQ=class e{constructor(e){this.editor=e.editor,this.rawCommands=this.editor.extensionManager.commands,this.customState=e.state}get hasCustomState(){return!!this.customState}get state(){return this.customState||this.editor.state}get commands(){let{rawCommands:e,editor:t,state:n}=this,{view:r}=t,{tr:i}=n,a=this.buildProps(i);return Object.fromEntries(Object.entries(e).map(([e,t])=>[e,(...e)=>{let n=t(...e)(a);return!i.getMeta(`preventDispatch`)&&!this.hasCustomState&&r.dispatch(i),n}]))}get chain(){return()=>this.createChain()}get can(){return()=>this.createCan()}createChain(e,t=!0){let{rawCommands:n,editor:r,state:i}=this,{view:a}=r,o=[],s=!!e,c=e||i.tr,l=()=>(!s&&t&&!c.getMeta(`preventDispatch`)&&!this.hasCustomState&&a.dispatch(c),o.every(e=>e===!0)),u={...Object.fromEntries(Object.entries(n).map(([e,n])=>[e,(...e)=>{let r=this.buildProps(c,t),i=n(...e)(r);return o.push(i),u}])),run:l};return u}static createFakeChain(){let e=new Proxy({},{get:(t,n)=>{if(n!==`then`)return n===`run`?()=>!1:()=>e}});return e}createCan(e){let{rawCommands:t,state:n}=this,r=e||n.tr,i=this.buildProps(r,!1);return{...Object.fromEntries(Object.entries(t).map(([e,t])=>[e,(...e)=>t(...e)({...i,dispatch:void 0})])),chain:()=>this.createChain(r,!1)}}static createFallbackCan(){let t=e.createFakeChain();return new Proxy({chain:()=>t},{get:(e,t)=>{if(t!==`then`)return t===`chain`?e.chain:()=>!1}})}buildProps(e,t=!0){let{rawCommands:n,editor:r,state:i}=this,{view:a}=r,o={tr:e,editor:r,view:a,state:PQ({state:i,transaction:e}),dispatch:t?()=>void 0:void 0,chain:()=>this.createChain(e,t),can:()=>this.createCan(e),get commands(){return Object.fromEntries(Object.entries(n).map(([e,t])=>[e,(...e)=>t(...e)(o)]))}};return o}},bPe=()=>({editor:e,view:t})=>(requestAnimationFrame(()=>{if(!e.isDestroyed){var n;t.dom.blur(),(n=window)==null||(n=n.getSelection())==null||n.removeAllRanges()}}),!0),xPe=(e=!0)=>({commands:t})=>t.setContent(``,{emitUpdate:e}),SPe=()=>({state:e,tr:t,dispatch:n})=>{let{selection:r}=t,{ranges:i}=r;return n&&i.forEach(({$from:n,$to:r})=>{e.doc.nodesBetween(n.pos,r.pos,(e,n)=>{if(e.type.isText)return;let{doc:r,mapping:i}=t,a=r.resolve(i.map(n)),o=r.resolve(i.map(n+e.nodeSize)),s=a.blockRange(o);if(!s)return;let c=EJ(s);if(e.type.isTextblock){let{defaultType:e}=a.parent.contentMatchAt(a.index());t.setNodeMarkup(s.start,e)}(c||c===0)&&t.lift(s,c)})}),!0},CPe=e=>t=>e(t),wPe=()=>({state:e,dispatch:t})=>MY(e,t),TPe=(e,t)=>({editor:n,tr:r})=>{let{state:i}=n,a=i.doc.slice(e.from,e.to);r.deleteRange(e.from,e.to);let o=r.mapping.map(t);return r.insert(o,a.content),r.setSelection(new eY(r.doc.resolve(Math.max(o-1,0)))),!0},EPe=()=>({tr:e,dispatch:t})=>{let{selection:n}=e,r=n.$anchor.node();if(r.content.size>0)return!1;let i=e.selection.$anchor;for(let n=i.depth;n>0;--n)if(i.node(n).type===r.type){if(t){let t=i.before(n),r=i.after(n);e.delete(t,r).scrollIntoView()}return!0}return!1};function IQ(e,t){if(typeof e==`string`){if(!t.nodes[e])throw Error(`There is no node type named '${e}'. Maybe you forgot to add the extension?`);return t.nodes[e]}return e}var DPe=e=>({tr:t,state:n,dispatch:r})=>{let i=IQ(e,n.schema),a=t.selection.$anchor;for(let e=a.depth;e>0;--e)if(a.node(e).type===i){if(r){let n=a.before(e),r=a.after(e);t.delete(n,r).scrollIntoView()}return!0}return!1},OPe=e=>({tr:t,dispatch:n})=>{let{from:r,to:i}=e;return n&&t.delete(r,i),!0},kPe=e=>e.content?/^text(\*|\+)/.test(e.content):!1,LQ=(e,t,n)=>{if(!e.parent.isInline||n===`left`&&e.pos>e.start()||n===`right`&&e.pos<e.end())return e.pos;let r=t.nodes[e.parent.type.name].spec;return kPe(r)?n===`left`?e.start()-1:e.end()+1:e.pos},APe=(e,t,n)=>({from:LQ(e,n,`left`),to:LQ(t,n,`right`)}),jPe=()=>({state:e,dispatch:t})=>{if(e.selection.empty)return!1;if(t){let n=e.tr,{ranges:r}=e.selection,i=n.steps.length;r.forEach(t=>{let r=n.mapping.slice(i),{from:a,to:o}=APe(n.doc.resolve(r.map(t.$from.pos)),n.doc.resolve(r.map(t.$to.pos)),e.schema);n.deleteRange(a,o)}),n.selection.empty||n.setSelection(eY.near(n.doc.resolve(n.selection.from))),n.scrollIntoView(),t(n)}return!0},MPe=()=>({commands:e})=>e.keyboardShortcut(`Enter`),NPe=()=>({state:e,dispatch:t})=>jY(e,t);function RQ(e){return Object.prototype.toString.call(e)===`[object RegExp]`}function zQ(e,t,n={strict:!0}){let r=Object.keys(t);return r.length?r.every(r=>n.strict?t[r]===e[r]:RQ(t[r])?t[r].test(e[r]):t[r]===e[r]):!0}function BQ(e,t,n={}){return e.find(e=>e.type===t&&zQ(Object.fromEntries(Object.keys(n).map(t=>[t,e.attrs[t]])),n))}function VQ(e,t,n={}){return!!BQ(e,t,n)}function HQ(e,t,n){if(!e||!t)return;let r=e.parent.childAfter(e.parentOffset);if((!r.node||!r.node.marks.some(e=>e.type===t))&&(r=e.parent.childBefore(e.parentOffset)),!r.node||!r.node.marks.some(e=>e.type===t))return;if(!n){let e=r.node.marks.find(e=>e.type===t);e&&(n=e.attrs)}if(!BQ([...r.node.marks],t,n))return;let i=r.index,a=e.start()+r.offset,o=i+1,s=a+r.node.nodeSize;for(;i>0&&VQ([...e.parent.child(i-1).marks],t,n);)--i,a-=e.parent.child(i).nodeSize;for(;o<e.parent.childCount&&VQ([...e.parent.child(o).marks],t,n);)s+=e.parent.child(o).nodeSize,o+=1;return{from:a,to:s}}function UQ(e,t){if(typeof e==`string`){if(!t.marks[e])throw Error(`There is no mark type named '${e}'. Maybe you forgot to add the extension?`);return t.marks[e]}return e}var PPe=(e,t)=>({tr:n,state:r,dispatch:i})=>{let a=UQ(e,r.schema),{doc:o,selection:s}=n,{$from:c,from:l,to:u}=s;if(i){let e=HQ(c,a,t);if(e&&e.from<=l&&e.to>=u){let t=eY.create(o,e.from,e.to);n.setSelection(t)}}return!0},FPe=e=>t=>{let n=typeof e==`function`?e(t):e;for(let e=0;e<n.length;e+=1)if(n[e](t))return!0;return!1};function WQ(e){return e instanceof eY}function GQ(e=0,t=0,n=0){return Math.min(Math.max(e,t),n)}function KQ(e,t=null){if(!t)return null;let n=ZJ.atStart(e),r=ZJ.atEnd(e);if(t===`start`||t===!0)return n;if(t===`end`)return r;let i=n.from,a=r.to;return t===`all`?eY.create(e,GQ(0,i,a),GQ(e.content.size,i,a)):eY.create(e,GQ(t,i,a),GQ(t,i,a))}function qQ(){return[`Android`].includes(navigator.platform)||/android/i.test(navigator.userAgent)}function JQ(){return[`iPad Simulator`,`iPhone Simulator`,`iPod Simulator`,`iPad`,`iPhone`,`iPod`].includes(navigator.platform)||navigator.userAgent.includes(`Mac`)&&`ontouchend`in document}function IPe(){return typeof navigator<`u`?/^((?!chrome|android).)*safari/i.test(navigator.userAgent):!1}var LPe=(e=null,t={})=>({editor:n,view:r,tr:i,dispatch:a})=>{t={scrollIntoView:!0,...t};let o=()=>{(JQ()||qQ())&&r.dom.focus(),IPe()&&!JQ()&&!qQ()&&r.dom.focus({preventScroll:!0}),requestAnimationFrame(()=>{n.isDestroyed||(r.focus(),t?.scrollIntoView&&n.commands.scrollIntoView())})};try{if(r.hasFocus()&&e===null||e===!1)return!0}catch{return!1}if(a&&e===null&&!WQ(n.state.selection))return o(),!0;let s=KQ(i.doc,e)||n.state.selection,c=n.state.selection.eq(s);return a&&(c||i.setSelection(s),c&&i.storedMarks&&i.setStoredMarks(i.storedMarks),o()),!0},RPe=(e,t)=>n=>e.every((e,r)=>t(e,{...n,index:r})),zPe=(e,t)=>({tr:n,commands:r})=>r.insertContentAt({from:n.selection.from,to:n.selection.to},e,t),YQ=e=>{let t=e.childNodes;for(let n=t.length-1;n>=0;--n){let r=t[n];r.nodeType===3&&r.nodeValue&&/^(\n\s\s|\n)$/.test(r.nodeValue)?e.removeChild(r):r.nodeType===1&&YQ(r)}return e};function XQ(e){if(typeof window>`u`)throw Error(`[tiptap error]: there is no window object available, so this function cannot be used`);let t=`<body>${e}</body>`,n=new window.DOMParser().parseFromString(t,`text/html`).body;return YQ(n)}function ZQ(e){return typeof e?.nodesBetween==`function`}function QQ(e,t,n){if(ZQ(e))return e;let r=typeof e==`object`&&!!e;n={slice:!0,parseOptions:{},...n};let i=typeof e==`string`;if(r)try{if(Array.isArray(e)&&e.length>0)return lq.fromArray(e.map(e=>t.nodeFromJSON(e)));let r=t.nodeFromJSON(e);return n.errorOnInvalidContent&&r.check(),r}catch(r){if(n.errorOnInvalidContent)throw Error(`[tiptap error]: Invalid JSON content`,{cause:r});return console.warn(`[tiptap warn]: Invalid content.`,`Passed value:`,e,`Error:`,r),QQ(``,t,n)}if(i){if(n.errorOnInvalidContent){let r=!1,i=``,a=new Hq({topNode:t.spec.topNode,marks:t.spec.marks,nodes:t.spec.nodes.append({__tiptap__private__unknown__catch__all__node:{content:`inline*`,group:`block`,parseDOM:[{tag:`*`,getAttrs:e=>(r=!0,i=typeof e==`string`?e:e.outerHTML,null)}]}})});if(n.slice?Wq.fromSchema(a).parseSlice(XQ(e),n.parseOptions):Wq.fromSchema(a).parse(XQ(e),n.parseOptions),n.errorOnInvalidContent&&r)throw Error(`[tiptap error]: Invalid HTML content`,{cause:Error(`Invalid element found: ${i}`)})}let r=Wq.fromSchema(t);return n.slice?r.parseSlice(XQ(e),n.parseOptions).content:r.parse(XQ(e),n.parseOptions)}return QQ(``,t,n)}function $Q(e){return!(`type`in e)}function e$(e,t,n){let r=e.steps.length-1;if(r<t)return;let i=e.steps[r];if(!(i instanceof SJ||i instanceof CJ))return;let a=e.mapping.maps[r],o=0;a.forEach((e,t,n,r)=>{o===0&&(o=r)}),e.setSelection(ZJ.near(e.doc.resolve(o),n))}var BPe=(e,t,n)=>({tr:r,dispatch:i,editor:a})=>{if(i){n={parseOptions:a.options.parseOptions,updateSelection:!0,applyInputRules:!1,applyPasteRules:!1,...n};let i,o=e=>{a.emit(`contentError`,{editor:a,error:e,disableCollaboration:()=>{`collaboration`in a.storage&&typeof a.storage.collaboration==`object`&&a.storage.collaboration&&(a.storage.collaboration.isDisabled=!0)}})},s={preserveWhitespace:`full`,...n.parseOptions};if(!n.errorOnInvalidContent&&!a.options.enableContentCheck&&a.options.emitContentError)try{QQ(t,a.schema,{parseOptions:s,errorOnInvalidContent:!0})}catch(e){o(e)}try{i=QQ(t,a.schema,{parseOptions:s,errorOnInvalidContent:n.errorOnInvalidContent??a.options.enableContentCheck})}catch(e){return o(e),!1}let{from:c,to:l}=typeof e==`number`?{from:e,to:e}:{from:e.from,to:e.to},u=!0,d=!0,f=$Q(i)?i.content:[i];if(f.forEach(e=>{e.check(),u=u?e.isText&&e.marks.length===0:!1,d=d?e.isBlock:!1}),c===l&&d){let{parent:e}=r.doc.resolve(c);e.isTextblock&&!e.type.spec.code&&!e.childCount&&(--c,l+=1)}let p;if(u)p=Array.isArray(t)?t.map(e=>e.text||``).join(``):ZQ(t)?f.map(e=>e.text??``).join(``):typeof t==`object`&&t&&t.text?t.text:t,r.insertText(p,c,l);else{p=lq.from(f);let e=r.doc.resolve(c),t=e.node(),n=e.parentOffset===0,i=t.isText||t.isTextblock,a=t.content.size>0;n&&i&&a&&d&&(c=Math.max(0,c-1)),r.replaceWith(c,l,f)}n.updateSelection&&e$(r,r.steps.length-1,-1),n.applyInputRules&&r.setMeta(`applyInputRules`,{from:c,text:p}),n.applyPasteRules&&r.setMeta(`applyPasteRules`,{from:c,text:p})}return!0};function t$(e){for(let t=0;t<e.edgeCount;t+=1){let{type:n}=e.edge(t);if(n.isTextblock&&!n.hasRequiredAttrs())return n}return null}var VPe=(e={})=>({tr:t,dispatch:n,editor:r})=>{let{pos:i,attrs:a,content:o,updateSelection:s=!0}=e,c;c=typeof i==`number`?t.doc.resolve(i):i||t.selection.$from;let l=t$(c.parent.contentMatchAt(c.index()));if(!l)return!1;let u=Object.keys(l.spec.attrs||{}),d=a?Object.fromEntries(Object.entries(a).filter(([e])=>u.includes(e))):{},f;if(o){let e=QQ(o,r.schema);f=l.createAndFill(d,e)}else f=l.createAndFill(d);return f?(n&&(t.insert(c.pos,f),s&&e$(t,t.steps.length-1,-1)),!0):!1},HPe=()=>({state:e,dispatch:t})=>dMe(e,t),UPe=()=>({state:e,dispatch:t})=>fMe(e,t),WPe=()=>({state:e,dispatch:t})=>bY(e,t),GPe=()=>({state:e,dispatch:t})=>EY(e,t),KPe=()=>({state:e,dispatch:t,tr:n})=>{try{let r=PJ(e.doc,e.selection.$from.pos,-1);return r==null?!1:(n.join(r,2),t&&t(n),!0)}catch{return!1}},qPe=()=>({state:e,dispatch:t,tr:n})=>{try{let r=PJ(e.doc,e.selection.$from.pos,1);return r==null?!1:(n.join(r,2),t&&t(n),!0)}catch{return!1}},JPe=()=>({state:e,dispatch:t})=>lMe(e,t),YPe=()=>({state:e,dispatch:t})=>uMe(e,t);function n$(){return typeof navigator<`u`?/Mac/.test(navigator.platform):!1}function XPe(e){let t=e.split(/-(?!$)/),n=t[t.length-1];n===`Space`&&(n=` `);let r,i,a,o;for(let e=0;e<t.length-1;e+=1){let n=t[e];if(/^(cmd|meta|m)$/i.test(n))o=!0;else if(/^a(lt)?$/i.test(n))r=!0;else if(/^(c|ctrl|control)$/i.test(n))i=!0;else if(/^s(hift)?$/i.test(n))a=!0;else if(/^mod$/i.test(n))JQ()||n$()?o=!0:i=!0;else throw Error(`Unrecognized modifier name: ${n}`)}return r&&(n=`Alt-${n}`),i&&(n=`Ctrl-${n}`),o&&(n=`Meta-${n}`),a&&(n=`Shift-${n}`),n}var ZPe=e=>({editor:t,view:n,tr:r,dispatch:i})=>{let a=XPe(e).split(/-(?!$)/),o=a.find(e=>![`Alt`,`Ctrl`,`Meta`,`Shift`].includes(e)),s=new KeyboardEvent(`keydown`,{key:o===`Space`?` `:o,altKey:a.includes(`Alt`),ctrlKey:a.includes(`Ctrl`),metaKey:a.includes(`Meta`),shiftKey:a.includes(`Shift`),bubbles:!0,cancelable:!0});return t.captureTransaction(()=>{n.someProp(`handleKeyDown`,e=>e(n,s))})?.steps.forEach(e=>{let t=e.map(r.mapping);t&&i&&r.maybeStep(t)}),!0};function r$(e,t,n={}){let{from:r,to:i,empty:a}=e.selection,o=t?IQ(t,e.schema):null,s=[];e.doc.nodesBetween(r,i,(e,t)=>{if(e.isText)return;let n=Math.max(r,t),a=Math.min(i,t+e.nodeSize);s.push({node:e,from:n,to:a})});let c=i-r,l=s.filter(e=>o?o.name===e.node.type.name:!0).filter(e=>zQ(e.node.attrs,n,{strict:!1}));return a?!!l.length:l.reduce((e,t)=>e+t.to-t.from,0)>=c}var QPe=(e,t={})=>({state:n,dispatch:r})=>r$(n,IQ(e,n.schema),t)?pMe(n,r):!1,$Pe=()=>({state:e,dispatch:t})=>NY(e,t),eFe=e=>({state:t,dispatch:n})=>wMe(IQ(e,t.schema))(t,n),tFe=()=>({state:e,dispatch:t})=>kY(e,t);function i$(e,t){return t.nodes[e]?`node`:t.marks[e]?`mark`:null}function a$(e,t){let n=typeof t==`string`?[t]:t;return Object.keys(e).reduce((t,r)=>(n.includes(r)||(t[r]=e[r]),t),{})}var nFe=(e,t)=>({tr:n,state:r,dispatch:i})=>{let a=null,o=null,s=i$(typeof e==`string`?e:e.name,r.schema);if(!s)return!1;s===`node`&&(a=IQ(e,r.schema)),s===`mark`&&(o=UQ(e,r.schema));let c=!1;return n.selection.ranges.forEach(e=>{r.doc.nodesBetween(e.$from.pos,e.$to.pos,(e,r)=>{a&&a===e.type&&(c=!0,i&&n.setNodeMarkup(r,void 0,a$(e.attrs,t))),o&&e.marks.length&&e.marks.forEach(a=>{o===a.type&&(c=!0,i&&n.addMark(r,r+e.nodeSize,o.create(a$(a.attrs,t))))})})}),c},rFe=()=>({tr:e,dispatch:t})=>(t&&e.scrollIntoView(),!0),iFe=()=>({tr:e,dispatch:t})=>{if(t){let t=new rY(e.doc);e.setSelection(t)}return!0},aFe=()=>({state:e,dispatch:t})=>CY(e,t),oFe=()=>({state:e,dispatch:t})=>DY(e,t),sFe=()=>({state:e,dispatch:t})=>gMe(e,t),cFe=()=>({state:e,dispatch:t})=>LY(e,t),lFe=()=>({state:e,dispatch:t})=>IY(e,t);function o$(e,t,n={},r={}){return QQ(e,t,{slice:!1,parseOptions:n,errorOnInvalidContent:r.errorOnInvalidContent})}var uFe=(e,{errorOnInvalidContent:t,emitUpdate:n=!0,parseOptions:r={}}={})=>({editor:i,tr:a,dispatch:o,commands:s})=>{let{doc:c}=a;if(r.preserveWhitespace!==`full`){let s=o$(e,i.schema,r,{errorOnInvalidContent:t??i.options.enableContentCheck});if(o){let e=$Q(s)?s.content:[s];a.replaceWith(0,c.content.size,e).setMeta(`preventUpdate`,!n)}return!0}return o&&a.setMeta(`preventUpdate`,!n),s.insertContentAt({from:0,to:c.content.size},e,{parseOptions:r,errorOnInvalidContent:t??i.options.enableContentCheck})};function s$(e,t){let n=UQ(t,e.schema),{from:r,to:i,empty:a}=e.selection,o=[];a?(e.storedMarks&&o.push(...e.storedMarks),o.push(...e.selection.$head.marks())):e.doc.nodesBetween(r,i,e=>{o.push(...e.marks)});let s=o.find(e=>e.type.name===n.name);return s?{...s.attrs}:{}}function c$(e,t){let n=new YJ(e);return t.forEach(e=>{e.steps.forEach(e=>{n.step(e)})}),n}function dFe(e,t,n){let r=[];return e.nodesBetween(t.from,t.to,(e,t)=>{n(e)&&r.push({node:e,pos:t})}),r}function fFe(e,t){for(let n=e.depth;n>0;--n){let r=e.node(n);if(t(r))return{pos:n>0?e.before(n):0,start:e.start(n),depth:n,node:r}}}function l$(e){return t=>fFe(t.$from,e)}function u$(e,t,n){return e.config[t]===void 0&&e.parent?u$(e.parent,t,n):typeof e.config[t]==`function`?e.config[t].bind({...n,parent:e.parent?u$(e.parent,t,n):null}):e.config[t]}function d$(e){return e.map(e=>{let t=u$(e,`addExtensions`,{name:e.name,options:e.options,storage:e.storage});return t?[e,...d$(t())]:e}).flat(10)}function f$(e,t){let n=tJ.fromSchema(t).serializeFragment(e),r=document.implementation.createHTMLDocument().createElement(`div`);return r.appendChild(n),r.innerHTML}function p$(e){return typeof e==`function`}function m$(e,t=void 0,...n){return p$(e)?t?e.bind(t)(...n):e(...n):e}function pFe(e={}){return Object.keys(e).length===0&&e.constructor===Object}function h$(e){return{baseExtensions:e.filter(e=>e.type===`extension`),nodeExtensions:e.filter(e=>e.type===`node`),markExtensions:e.filter(e=>e.type===`mark`)}}function g$(e){let t=[],{nodeExtensions:n,markExtensions:r}=h$(e),i=[...n,...r],a={default:null,validate:void 0,rendered:!0,renderHTML:null,parseHTML:null,keepOnSplit:!0,isRequired:!1},o=n.filter(e=>e.name!==`text`).map(e=>e.name),s=r.map(e=>e.name),c=[...o,...s];return e.forEach(e=>{let n=u$(e,`addGlobalAttributes`,{name:e.name,options:e.options,storage:e.storage,extensions:i});n&&n().forEach(e=>{let n;n=Array.isArray(e.types)?e.types:e.types===`*`?c:e.types===`nodes`?o:e.types===`marks`?s:[],n.forEach(n=>{Object.entries(e.attributes).forEach(([e,r])=>{t.push({type:n,name:e,attribute:{...a,...r}})})})})}),i.forEach(e=>{let n=u$(e,`addAttributes`,{name:e.name,options:e.options,storage:e.storage});if(!n)return;let r=n();Object.entries(r).forEach(([n,r])=>{let i={...a,...r};typeof i?.default==`function`&&(i.default=i.default()),i?.isRequired&&i?.default===void 0&&delete i.default,t.push({type:e.name,name:n,attribute:i})})}),t}function mFe(e){let t=[],n=``,r=!1,i=!1,a=0,o=e.length;for(let s=0;s<o;s+=1){let o=e[s];if(o===`'`&&!i){r=!r,n+=o;continue}if(o===`"`&&!r){i=!i,n+=o;continue}if(!r&&!i){if(o===`(`){a+=1,n+=o;continue}if(o===`)`&&a>0){--a,n+=o;continue}if(o===`;`&&a===0){t.push(n),n=``;continue}}n+=o}return n&&t.push(n),t}function _$(e){let t=[],n=mFe(e||``),r=n.length;for(let e=0;e<r;e+=1){let r=n[e],i=r.indexOf(`:`);if(i===-1)continue;let a=r.slice(0,i).trim(),o=r.slice(i+1).trim();a&&o&&t.push([a,o])}return t}function v$(...e){return e.filter(e=>!!e).reduce((e,t)=>{let n={...e};return Object.entries(t).forEach(([e,t])=>{if(e===`__proto__`){Object.defineProperty(n,e,{configurable:!0,enumerable:!0,value:t,writable:!0});return}if(!n[e]){n[e]=t;return}if(e===`class`){let r=t?String(t).split(` `):[],i=n[e]?n[e].split(` `):[],a=r.filter(e=>!i.includes(e));n[e]=[...i,...a].join(` `)}else if(e===`style`){let r=new Map([..._$(n[e]),..._$(t)]);n[e]=Array.from(r.entries()).map(([e,t])=>`${e}: ${t}`).join(`; `)}else n[e]=t}),n},{})}function y$(e,t){return t.filter(t=>t.type===e.type.name).filter(e=>e.attribute.rendered).map(t=>t.attribute.renderHTML?t.attribute.renderHTML(e.attrs)||{}:{[t.name]:e.attrs[t.name]}).reduce((e,t)=>v$(e,t),{})}function hFe(e){return typeof e==`string`?e.match(/^[+-]?(?:\d*\.)?\d+$/)?Number(e):e===`true`?!0:e===`false`?!1:e:e}function b$(e,t){return`style`in e?e:{...e,getAttrs:n=>{let r=e.getAttrs?e.getAttrs(n):e.attrs;if(r===!1)return!1;let i=t.reduce((e,t)=>{let r=t.attribute.parseHTML?t.attribute.parseHTML(n):hFe(n.getAttribute(t.name));return r==null?e:{...e,[t.name]:r}},{});return{...r,...i}}}}function x$(e){return Object.fromEntries(Object.entries(e).filter(([e,t])=>e===`attrs`&&pFe(t)?!1:t!=null))}function S$(e){var t,n;let r={};return!(!(e==null||(t=e.attribute)==null)&&t.isRequired)&&`default`in(e?.attribute||{})&&(r.default=e.attribute.default),(e==null||(n=e.attribute)==null?void 0:n.validate)!==void 0&&(r.validate=e.attribute.validate),[e.name,r]}function gFe(e,t){let n=g$(e),{nodeExtensions:r,markExtensions:i}=h$(e);return new Hq({topNode:r.find(e=>u$(e,`topNode`))?.name,nodes:Object.fromEntries(r.map(r=>{let i=n.filter(e=>e.type===r.name),a={name:r.name,options:r.options,storage:r.storage,editor:t},o=x$({...e.reduce((e,t)=>{let n=u$(t,`extendNodeSchema`,a);return{...e,...n?n(r):{}}},{}),content:m$(u$(r,`content`,a)),marks:m$(u$(r,`marks`,a)),group:m$(u$(r,`group`,a)),inline:m$(u$(r,`inline`,a)),atom:m$(u$(r,`atom`,a)),selectable:m$(u$(r,`selectable`,a)),draggable:m$(u$(r,`draggable`,a)),code:m$(u$(r,`code`,a)),whitespace:m$(u$(r,`whitespace`,a)),linebreakReplacement:m$(u$(r,`linebreakReplacement`,a)),defining:m$(u$(r,`defining`,a)),isolating:m$(u$(r,`isolating`,a)),attrs:Object.fromEntries(i.map(S$))}),s=m$(u$(r,`parseHTML`,a));s&&(o.parseDOM=s.map(e=>b$(e,i)));let c=u$(r,`renderHTML`,a);c&&(o.toDOM=e=>c({node:e,HTMLAttributes:y$(e,i)}));let l=u$(r,`renderText`,a);return l&&(o.toText=l),[r.name,o]})),marks:Object.fromEntries(i.map(r=>{let i=n.filter(e=>e.type===r.name),a={name:r.name,options:r.options,storage:r.storage,editor:t},o=x$({...e.reduce((e,t)=>{let n=u$(t,`extendMarkSchema`,a);return{...e,...n?n(r):{}}},{}),inclusive:m$(u$(r,`inclusive`,a)),excludes:m$(u$(r,`excludes`,a)),group:m$(u$(r,`group`,a)),spanning:m$(u$(r,`spanning`,a)),code:m$(u$(r,`code`,a)),attrs:Object.fromEntries(i.map(S$))}),s=m$(u$(r,`parseHTML`,a));s&&(o.parseDOM=s.map(e=>b$(e,i)));let c=u$(r,`renderHTML`,a);return c&&(o.toDOM=e=>c({mark:e,HTMLAttributes:y$(e,i)})),[r.name,o]}))})}function _Fe(e){let t=e.filter((t,n)=>e.indexOf(t)!==n);return Array.from(new Set(t))}function C$(e){return e.sort((e,t)=>{let n=u$(e,`priority`)||100,r=u$(t,`priority`)||100;return n>r?-1:+(n<r)})}function w$(e){let t=C$(d$(e)),n=_Fe(t.map(e=>e.name));return n.length&&console.warn(`[tiptap warn]: Duplicate extension names found: [${n.map(e=>`'${e}'`).join(`, `)}]. This can lead to issues.`),t}function T$(e,t,n){let{from:r,to:i}=t,{blockSeparator:a=`
 
-`,textSerializers:o={}}=n||{},s=``;return e.nodesBetween(r,i,(e,n,c,l)=>{e.isBlock&&n>r&&(s+=a);let u=o?.[e.type.name];if(u)return c&&(s+=u({node:e,pos:n,parent:c,index:l,range:t})),!1;if(e.isText){var d;s+=e==null||(d=e.text)==null?void 0:d.slice(Math.max(r,n)-n,i-n)}}),s}function _Fe(e,t){return S$(e,{from:0,to:e.content.size},t)}function C$(e){return Object.fromEntries(Object.entries(e.nodes).filter(([,e])=>e.spec.toText).map(([e,t])=>[e,t.spec.toText]))}function vFe(e,t){let n=NQ(t,e.schema),{from:r,to:i}=e.selection,a=[];e.doc.nodesBetween(r,i,e=>{a.push(e)});let o=a.reverse().find(e=>e.type.name===n.name);return o?{...o.attrs}:{}}function w$(e,t){let n=t$(typeof t==`string`?t:t.name,e.schema);return n===`node`?vFe(e,t):n===`mark`?i$(e,t):{}}function yFe(e,t=JSON.stringify){let n={};return e.filter(e=>{let r=t(e);return Object.prototype.hasOwnProperty.call(n,r)?!1:n[r]=!0})}function bFe(e){let t=yFe(e);return t.length===1?t:t.filter((e,n)=>!t.filter((e,t)=>t!==n).some(t=>e.oldRange.from>=t.oldRange.from&&e.oldRange.to<=t.oldRange.to&&e.newRange.from>=t.newRange.from&&e.newRange.to<=t.newRange.to))}function T$(e){let{mapping:t,steps:n}=e,r=[];return t.maps.forEach((e,i)=>{let a=[];if(e.ranges.length)e.forEach((e,t)=>{a.push({from:e,to:t})});else{let{from:e,to:t}=n[i];if(e===void 0||t===void 0)return;a.push({from:e,to:t})}a.forEach(({from:e,to:n})=>{let a=t.slice(i).map(e,-1),o=t.slice(i).map(n),s=t.invert().map(a,-1),c=t.invert().map(o);r.push({oldRange:{from:s,to:c},newRange:{from:a,to:o}})})}),bFe(r)}function E$(e,t,n){let r=[];return e===t?n.resolve(e).marks().forEach(t=>{let i=zQ(n.resolve(e),t.type);i&&r.push({mark:t,...i})}):n.nodesBetween(e,t,(e,t)=>{!e||e?.nodeSize===void 0||r.push(...e.marks.map(n=>({from:t,to:t+e.nodeSize,mark:n})))}),r}var xFe=(e,t,n,r=20)=>{let i=e.doc.resolve(n),a=r,o=null;for(;a>0&&o===null;){let e=i.node(a);e?.type.name===t?o=e:--a}return[o,a]},SFe=e=>{let t=e.depth-1;if(t<0)return null;let n=e.index(t);return n===0?null:e.node(t).child(n-1)};function D$(e,t){return t.nodes[e]||t.marks[e]||null}function O$(e,t,n){return Object.fromEntries(Object.entries(n).filter(([n])=>{let r=e.find(e=>e.type===t&&e.name===n);return r?r.attribute.keepOnSplit:!1}))}var CFe=(e,t=500)=>{let n=``,r=e.parentOffset;return e.parent.nodesBetween(Math.max(0,r-t),r,(e,t,i,a)=>{var o;let s=(o=e.type.spec).toText?.call(o,{node:e,pos:t,parent:i,index:a})||e.textContent||`%leaf%`;n+=e.isAtom&&!e.isText?s:s.slice(0,Math.max(0,r-t))}),n};function k$(e,t,n={}){let{empty:r,ranges:i}=e.selection,a=t?BQ(t,e.schema):null;if(r)return!!(e.storedMarks||e.selection.$from.marks()).filter(e=>a?a.name===e.type.name:!0).find(e=>IQ(e.attrs,n,{strict:!1}));let o=0,s=[];if(i.forEach(({$from:t,$to:n})=>{let r=t.pos,i=n.pos;e.doc.nodesBetween(r,i,(e,t)=>{if(a&&e.inlineContent&&!e.type.allowsMarkType(a))return!1;if(!e.isText&&!e.marks.length)return;let n=Math.max(r,t),c=Math.min(i,t+e.nodeSize),l=c-n;o+=l,s.push(...e.marks.map(e=>({mark:e,from:n,to:c})))})}),o===0)return!1;let c=s.filter(e=>a?a.name===e.mark.type.name:!0).filter(e=>IQ(e.mark.attrs,n,{strict:!1})).reduce((e,t)=>e+t.to-t.from,0),l=s.filter(e=>a?e.mark.type!==a&&e.mark.type.excludes(a):!0).reduce((e,t)=>e+t.to-t.from,0);return(c>0?c+l:c)>=o}function wFe(e,t,n={}){if(!t)return e$(e,null,n)||k$(e,null,n);let r=t$(t,e.schema);return r===`node`?e$(e,t,n):r===`mark`?k$(e,t,n):!1}var TFe=(e,t)=>{let{$from:n,$to:r,$anchor:i}=e.selection;if(t){let n=o$(e=>e.type.name===t)(e.selection);if(!n)return!1;let r=e.doc.resolve(n.pos+1);return i.pos+1===r.end()}return!(r.parentOffset<r.parent.nodeSize-2||n.pos!==r.pos)},EFe=e=>{let{$from:t,$to:n}=e.selection;return!(t.parentOffset>0||t.pos!==n.pos)};function A$(e,t){return Array.isArray(t)?t.some(t=>(typeof t==`string`?t:t.name)===e.name):t}function j$(e,t){let{nodeExtensions:n}=f$(t),r=n.find(t=>t.name===e);if(!r)return!1;let i=d$(s$(r,`group`,{name:r.name,options:r.options,storage:r.storage}));return typeof i==`string`?i.split(` `).includes(`list`):!1}function M$(e,{checkChildren:t=!0,ignoreWhitespace:n=!1}={}){if(n){if(e.type.name===`hardBreak`)return!0;if(e.isText)return!/\S/.test(e.text??``)}if(e.isText)return!e.text;if(e.isAtom||e.isLeaf)return!1;if(e.content.childCount===0)return!0;if(t){let r=!0;return e.content.forEach(e=>{r!==!1&&(M$(e,{ignoreWhitespace:n,checkChildren:t})||(r=!1))}),r}return!1}function N$(e){return e instanceof $J}var P$=class e{constructor(e){this.position=e}static fromJSON(t){return new e(t.position)}toJSON(){return{position:this.position}}};function DFe(e,t){let n=t.mapping.mapResult(e.position);return{position:new P$(n.pos),mapResult:n}}function OFe(e){return new P$(e)}function kFe(e,t,n){let{selection:r}=t,i=null;if(VQ(r)&&(i=r.$cursor),i){let t=e.storedMarks??i.marks();return i.parent.type.allowsMarkType(n)&&(!!n.isInSet(t)||!t.some(e=>e.type.excludes(n)))}let{ranges:a}=r;return a.some(({$from:t,$to:r})=>{let i=t.depth===0?e.doc.inlineContent&&e.doc.type.allowsMarkType(n):!1;return e.doc.nodesBetween(t.pos,r.pos,(e,t,r)=>{if(i)return!1;if(e.isInline){let t=!r||r.type.allowsMarkType(n),a=!!n.isInSet(e.marks)||!e.marks.some(e=>e.type.excludes(n));i=t&&a}return!i}),i})}var AFe=(e,t={})=>({tr:n,state:r,dispatch:i})=>{let{selection:a}=n,{empty:o,ranges:s}=a,c=BQ(e,r.schema);if(i)if(o){let e=i$(r,c);n.addStoredMark(c.create({...e,...t}))}else s.forEach(e=>{let i=e.$from.pos,a=e.$to.pos;r.doc.nodesBetween(i,a,(e,r)=>{let o=Math.max(r,i),s=Math.min(r+e.nodeSize,a);e.marks.find(e=>e.type===c)?e.marks.forEach(e=>{c===e.type&&n.addMark(o,s,c.create({...e.attrs,...t}))}):n.addMark(o,s,c.create(t))})});return kFe(r,n,c)},jFe=(e,t)=>({tr:n})=>(n.setMeta(e,t),!0),MFe=(e,t={})=>({state:n,dispatch:r,chain:i})=>{let a=NQ(e,n.schema),o;return n.selection.$anchor.sameParent(n.selection.$head)&&(o=n.selection.$anchor.parent.attrs),a.isTextblock?i().command(({commands:e})=>FY(a,{...o,...t})(n)?!0:e.clearNodes()).command(({state:e})=>FY(a,{...o,...t})(e,r)).run():(console.warn(`[tiptap warn]: Currently "setNode()" only supports text block nodes.`),!1)},NFe=e=>({tr:t,dispatch:n})=>{if(n){let{doc:n}=t,r=HQ(e,0,n.content.size),i=$J.create(n,r);t.setSelection(i)}return!0},PFe=(e,t)=>({tr:n,state:r,dispatch:i})=>{let{selection:a}=r,o,s;return typeof t==`number`?(o=t,s=t):t&&`from`in t&&`to`in t?(o=t.from,s=t.to):(o=a.from,s=a.to),i&&n.doc.nodesBetween(o,s,(t,r)=>{t.isText||n.setNodeMarkup(r,void 0,{...t.attrs,dir:e})}),!0},FFe=e=>({tr:t,dispatch:n})=>{if(n){let{doc:n}=t,{from:r,to:i}=typeof e==`number`?{from:e,to:e}:e,a=ZJ.atStart(n).from,o=ZJ.atEnd(n).to,s=HQ(r,a,o),c=HQ(i,a,o),l=ZJ.create(n,s,c);t.setSelection(l)}return!0},IFe=e=>({state:t,dispatch:n})=>EMe(NQ(e,t.schema))(t,n);function F$(e,t){let n=e.storedMarks||e.selection.$to.parentOffset&&e.selection.$from.marks();if(n){let r=n.filter(e=>t?.includes(e.type.name));e.tr.ensureMarks(r)}}var LFe=({keepMarks:e=!0}={})=>({tr:t,state:n,dispatch:r,editor:i})=>{let{selection:a,doc:o}=t,{$from:s,$to:c}=a,l=i.extensionManager.attributes,u=O$(l,s.node().type.name,s.node().attrs);if(a instanceof $J&&a.node.isBlock)return!s.parentOffset||!OJ(o,s.pos)?!1:(r&&(e&&F$(n,i.extensionManager.splittableMarks),t.split(s.pos).scrollIntoView()),!0);if(!s.parent.isBlock)return!1;let d=c.parentOffset===c.parent.content.size,f=s.depth===0?void 0:QQ(s.node(-1).contentMatchAt(s.indexAfter(-1))),p=d&&f?[{type:f,attrs:u}]:void 0,m=OJ(t.doc,t.mapping.map(s.pos),1,p);if(!p&&!m&&OJ(t.doc,t.mapping.map(s.pos),1,f?[{type:f}]:void 0)&&(m=!0,p=f?[{type:f,attrs:u}]:void 0),r){if(m&&(a instanceof ZJ&&t.deleteSelection(),t.split(t.mapping.map(s.pos),1,p),f&&!d&&!s.parentOffset&&s.parent.type!==f)){let e=t.mapping.map(s.before()),n=t.doc.resolve(e);s.node(-1).canReplaceWith(n.index(),n.index()+1,f)&&t.setNodeMarkup(t.mapping.map(s.before()),f)}e&&F$(n,i.extensionManager.splittableMarks),t.scrollIntoView()}return m},RFe=(e,t={})=>({tr:n,state:r,dispatch:i,editor:a})=>{let o=NQ(e,r.schema),{$from:s,$to:c}=r.selection,l=r.selection.node;if(l&&l.isBlock||s.depth<2||!s.sameParent(c))return!1;let u=s.node(-1);if(u.type!==o)return!1;let d=a.extensionManager.attributes;if(s.parent.content.size===0&&s.node(-1).childCount===s.indexAfter(-1)){if(s.depth===2||s.node(-3).type!==o||s.index(-2)!==s.node(-2).childCount-1)return!1;if(i){let e=oq.empty,r=s.index(-1)?1:s.index(-2)?2:3;for(let t=s.depth-r;t>=s.depth-3;--t)e=oq.from(s.node(t).copy(e));let i=s.indexAfter(-1)<s.node(-2).childCount?1:s.indexAfter(-2)<s.node(-3).childCount?2:3,a={...O$(d,s.node().type.name,s.node().attrs),...t},c=o.contentMatch.defaultType?.createAndFill(a)||void 0;e=e.append(oq.from(o.createAndFill(null,c)||void 0));let l=s.before(s.depth-(r-1));n.replace(l,s.after(-i),new fq(e,4-r,0));let u=-1;n.doc.nodesBetween(l,n.doc.content.size,(e,t)=>{if(u>-1)return!1;e.isTextblock&&e.content.size===0&&(u=t+1)}),u>-1&&n.setSelection(ZJ.near(n.doc.resolve(u))),n.scrollIntoView()}return!0}let f=c.pos===s.end()?u.contentMatchAt(0).defaultType:null,p={...O$(d,u.type.name,u.attrs),...t},m={...O$(d,s.node().type.name,s.node().attrs),...t};n.delete(s.pos,c.pos);let h=f?[{type:o,attrs:p},{type:f,attrs:m}]:[{type:o,attrs:p}];if(!OJ(n.doc,s.pos,2))return!1;if(i){let{selection:e,storedMarks:t}=r,{splittableMarks:o}=a.extensionManager,c=t||e.$to.parentOffset&&e.$from.marks();if(n.split(s.pos,2,h).scrollIntoView(),!c||!i)return!0;let l=c.filter(e=>o.includes(e.type.name));n.ensureMarks(l)}return!0};function I$(e){return!e||e===`1`?null:e}function L$(e,t){return I$(e)===I$(t)}var R$=(e,t)=>{let n=o$(e=>e.type===t)(e.selection);if(!n)return!0;let r=e.doc.resolve(Math.max(0,n.pos-1)).before(n.depth);if(r===void 0)return!0;let i=e.doc.nodeAt(r);return!(n.node.type===i?.type&&kJ(e.doc,n.pos))||!L$(n.node.attrs.type,i?.attrs.type)||e.join(n.pos),!0},z$=(e,t)=>{let n=o$(e=>e.type===t)(e.selection);if(!n)return!0;let r=e.doc.resolve(n.start).after(n.depth);if(r===void 0)return!0;let i=e.doc.nodeAt(r);return!(n.node.type===i?.type&&kJ(e.doc,r))||!L$(n.node.attrs.type,i?.attrs.type)||e.join(r),!0};function zFe(e){let t=e.doc,n=t.firstChild;if(!n)return null;let r=t.resolve(1),i=t.resolve(n.nodeSize-1);return ZJ.between(r,i)}var BFe=(e,t,n,r={})=>({editor:i,tr:a,state:o,dispatch:s,chain:c,commands:l,can:u})=>{let{extensions:d,splittableMarks:f}=i.extensionManager,p=NQ(e,o.schema),m=NQ(t,o.schema),{selection:h,storedMarks:g}=o,{$from:_,$to:v}=h,y=_.blockRange(v),b=g||h.$to.parentOffset&&h.$from.marks();if(!y)return!1;let x=o$(e=>j$(e.type.name,d))(h),S=h.from===0&&h.to===o.doc.content.size,C=o.doc.content.content,w=C.length===1?C[0]:null,T=S&&w&&j$(w.type.name,d)?{node:w,pos:0,depth:0}:null,E=x??T,D=!!x&&y.depth>=1&&y.depth-x.depth<=1,O=!!T;if((D||O)&&E){if(E.node.type===p)return S&&O?c().command(({tr:e,dispatch:t})=>{let n=zFe(e);return n?(e.setSelection(n),t&&t(e),!0):!1}).liftListItem(m).run():l.liftListItem(m);if(j$(E.node.type.name,d)&&p.validContent(E.node.content))return c().command(()=>(a.setNodeMarkup(E.pos,p),!0)).command(()=>R$(a,p)).command(()=>z$(a,p)).run()}return!n||!b||!s?c().command(()=>u().wrapInList(p,r)?!0:l.clearNodes()).wrapInList(p,r).command(()=>R$(a,p)).command(()=>z$(a,p)).run():c().command(()=>{let e=u().wrapInList(p,r),t=b.filter(e=>f.includes(e.type.name));return a.ensureMarks(t),e?!0:l.clearNodes()}).wrapInList(p,r).command(()=>R$(a,p)).command(()=>z$(a,p)).run()},VFe=(e,t={},n={})=>({state:r,commands:i})=>{let{extendEmptyMarkRange:a=!1}=n,o=BQ(e,r.schema);return k$(r,o,t)?i.unsetMark(o,{extendEmptyMarkRange:a}):i.setMark(o,t)},HFe=(e,t,n={})=>({state:r,commands:i})=>{let a=NQ(e,r.schema),o=NQ(t,r.schema),s=e$(r,a,n),c;return r.selection.$anchor.sameParent(r.selection.$head)&&(c=r.selection.$anchor.parent.attrs),s?i.setNode(o,c):i.setNode(a,{...c,...n})},UFe=(e,t={})=>({state:n,commands:r})=>{let i=NQ(e,n.schema);return e$(n,i,t)?r.lift(i):r.wrapIn(i,t)},WFe=()=>({state:e,dispatch:t})=>{let n=e.plugins;for(let r=0;r<n.length;r+=1){let i=n[r],a;if(i.spec.isInputRules&&(a=i.getState(e))){if(t){let t=e.tr,n=a.transform;for(let e=n.steps.length-1;e>=0;--e)t.step(n.steps[e].invert(n.docs[e]));if(a.text){let n=t.doc.resolve(a.from).marks();t.replaceWith(a.from,a.to,e.schema.text(a.text,n))}else t.delete(a.from,a.to)}return!0}}return!1},GFe=(e={})=>({tr:t,dispatch:n,editor:r})=>{let{ignoreClearable:i=!1}=e,{selection:a}=t,{empty:o,ranges:s}=a;if(o)return!0;let{nonClearableMarks:c}=r.extensionManager;if(n){let e=Object.values(r.schema.marks).filter(e=>i||!c.includes(e.name));s.forEach(n=>{for(let r of e)t.removeMark(n.$from.pos,n.$to.pos,r)})}return!0},KFe=(e,t={})=>({tr:n,state:r,dispatch:i})=>{let{extendEmptyMarkRange:a=!1}=t,{selection:o}=n,s=BQ(e,r.schema),{$from:c,empty:l,ranges:u}=o;if(!i)return!0;if(l&&a){let{from:e,to:t}=o,r=zQ(c,s,c.marks().find(e=>e.type===s)?.attrs);r&&(e=r.from,t=r.to),n.removeMark(e,t,s)}else u.forEach(e=>{n.removeMark(e.$from.pos,e.$to.pos,s)});return n.removeStoredMark(s),!0},qFe=e=>({tr:t,state:n,dispatch:r})=>{let{selection:i}=n,a,o;return typeof e==`number`?(a=e,o=e):e&&`from`in e&&`to`in e?(a=e.from,o=e.to):(a=i.from,o=i.to),r&&t.doc.nodesBetween(a,o,(e,n)=>{if(e.isText)return;let r={...e.attrs};delete r.dir,t.setNodeMarkup(n,void 0,r)}),!0},JFe=(e,t={})=>({tr:n,state:r,dispatch:i})=>{let a=null,o=null,s=t$(typeof e==`string`?e:e.name,r.schema);if(!s)return!1;s===`node`&&(a=NQ(e,r.schema)),s===`mark`&&(o=BQ(e,r.schema));let c=!1;return n.selection.ranges.forEach(e=>{let s=e.$from.pos,l=e.$to.pos,u,d,f,p;n.selection.empty?r.doc.nodesBetween(s,l,(e,t)=>{a&&a===e.type&&(c=!0,f=Math.max(t,s),p=Math.min(t+e.nodeSize,l),u=t,d=e)}):r.doc.nodesBetween(s,l,(e,r)=>{r<s&&a&&a===e.type&&(c=!0,f=Math.max(r,s),p=Math.min(r+e.nodeSize,l),u=r,d=e),r>=s&&r<=l&&(a&&a===e.type&&(c=!0,i&&n.setNodeMarkup(r,void 0,{...e.attrs,...t})),o&&e.marks.length&&e.marks.forEach(a=>{if(o===a.type&&(c=!0,i)){let i=Math.max(r,s),c=Math.min(r+e.nodeSize,l);n.addMark(i,c,o.create({...a.attrs,...t}))}}))}),d&&(u!==void 0&&i&&n.setNodeMarkup(u,void 0,{...d.attrs,...t}),o&&d.marks.length&&d.marks.forEach(e=>{o===e.type&&i&&n.addMark(f,p,o.create({...e.attrs,...t}))}))}),c},B$=new mY(`__tiptap_decorations__`),YFe=e=>({tr:t,dispatch:n})=>(n&&t.setMeta(B$,{type:`force`,name:e}),!0),XFe=(e,t={})=>({state:n,dispatch:r})=>vMe(NQ(e,n.schema),t)(n,r),ZFe=(e,t={})=>({state:n,dispatch:r})=>bMe(NQ(e,n.schema),t)(n,r),QFe=cje({blur:()=>yPe,clearContent:()=>bPe,clearNodes:()=>xPe,command:()=>SPe,createParagraphNear:()=>CPe,cut:()=>wPe,deleteCurrentNode:()=>TPe,deleteNode:()=>EPe,deleteRange:()=>DPe,deleteSelection:()=>APe,enter:()=>jPe,exitCode:()=>MPe,extendMarkRange:()=>NPe,first:()=>PPe,focus:()=>IPe,forEach:()=>LPe,insertContent:()=>RPe,insertContentAt:()=>zPe,insertDefaultBlock:()=>BPe,joinBackward:()=>UPe,joinDown:()=>HPe,joinForward:()=>WPe,joinItemBackward:()=>GPe,joinItemForward:()=>KPe,joinTextblockBackward:()=>qPe,joinTextblockForward:()=>JPe,joinUp:()=>VPe,keyboardShortcut:()=>XPe,lift:()=>ZPe,liftEmptyBlock:()=>QPe,liftListItem:()=>$Pe,newlineInCode:()=>eFe,resetAttributes:()=>tFe,scrollIntoView:()=>nFe,selectAll:()=>rFe,selectNodeBackward:()=>iFe,selectNodeForward:()=>aFe,selectParentNode:()=>oFe,selectTextblockEnd:()=>sFe,selectTextblockStart:()=>cFe,setContent:()=>lFe,setMark:()=>AFe,setMeta:()=>jFe,setNode:()=>MFe,setNodeSelection:()=>NFe,setTextDirection:()=>PFe,setTextSelection:()=>FFe,sinkListItem:()=>IFe,splitBlock:()=>LFe,splitListItem:()=>RFe,toggleList:()=>BFe,toggleMark:()=>VFe,toggleNode:()=>HFe,toggleWrap:()=>UFe,undoInputRule:()=>WFe,unsetAllMarks:()=>GFe,unsetMark:()=>KFe,unsetTextDirection:()=>qFe,updateAttributes:()=>JFe,updateDecorations:()=>YFe,wrapIn:()=>XFe,wrapInList:()=>ZFe}),V$=new WeakMap;function $Fe(e,t){V$.set(e,(V$.get(e)??0)+1);try{return t()}finally{let t=(V$.get(e)??1)-1;t>0?V$.set(e,t):V$.delete(e)}}function eIe(e){return V$.has(e)}var tIe=class{constructor(){this.callbacks={}}on(e,t){return this.callbacks[e]||(this.callbacks[e]=[]),this.callbacks[e].push(t),this}emit(e,...t){let n=this.callbacks[e];return n&&n.forEach(e=>e.apply(this,t)),this}off(e,t){let n=this.callbacks[e];return n&&(t?this.callbacks[e]=n.filter(e=>e!==t):delete this.callbacks[e]),this}once(e,t){let n=(...r)=>{this.off(e,n),t.apply(this,r)};return this.on(e,n)}removeAllListeners(){this.callbacks={}}},H$=typeof process<`u`&&!1;function nIe(e){return e.kind===`widget`}function U$(e,t){let n=[],r=new Set;for(let i of e)i.kind===`widget`&&nIe(i)&&r.add(i.key),n.push(i.toPMDecoration(t));return{decorations:n,widgetKeys:r}}function rIe(e,t,n){let{decorations:r,widgetKeys:i}=U$(t,n);return{set:rQ.create(e,r),widgetKeys:i}}function W$({position:e,from:t,to:n,docSize:r}){return e<t?!1:e<n?!0:e===n&&n===r}function iIe({decorations:e,from:t,to:n,docSize:r,extensionName:i,warnedExtensions:a}){return e.filter(e=>W$({position:e.anchor,from:t,to:n,docSize:r})?!0:(e.anchor===n||a.has(i)||(a.add(i),console.warn(`[tiptap warn]: Extension "${i}" returned a decoration outside the requested range [${t}, ${n}). It was ignored.`)),!1))}function G$(e){let t=e.spec?.key;return typeof t==`string`?t:void 0}function aIe(e){let t=new Map,n=new Map;for(let r of e.find()){let e=G$(r);if(!e)continue;let i=r.spec.extensionName??`unknown`,a=t.get(e)??new Set;a.add(i),t.set(e,a),n.set(e,(n.get(e)??0)+1)}return Array.from(t,([e,t])=>({key:e,extensions:t})).filter(({key:e})=>(n.get(e)??0)>1)}function K$(e){return e.jsonID===`attr`}function oIe(e){let t=!1;if(e.getMap().forEach(()=>{t=!0}),t||K$(e))return!0;let n=e;return typeof n.from==`number`&&typeof n.to==`number`}function sIe(e,t){let n=null,r=0,i=0;for(let a=0;a<e.childCount&&!(i>t.to);a+=1){let o=i+e.child(a).nodeSize;o>=t.from&&(n===null&&(n=i),r=o),i=o}return n===null?null:{from:n,to:r}}function cIe(e,t){if(e.steps.some(e=>!oIe(e)))return{type:`full`};let n=T$(e).map(({newRange:e})=>e);e.steps.forEach((t,r)=>{if(!K$(t))return;let i=e.mapping.slice(r);n.push({from:i.map(t.pos,-1),to:i.map(t.pos+1)})});let r=[];for(let e of n){let n=sIe(t,e);n&&r.push(n)}r.sort((e,t)=>e.from-t.from);let i=[];for(let e of r){let t=i[i.length-1];t&&e.from<=t.to?t.to=Math.max(t.to,e.to):i.push({...e})}return{type:`ranges`,ranges:i}}function q$(e,t,n,r){return e.map(t,n,{onRemove:e=>{let t=e?.key;typeof t==`string`&&r.delete(t)}})}function lIe(e,t,n){let r=t.decorationSetsByExtension[e]??rQ.empty,i=new Set(t.widgetKeysByExtension[e]??[]);return{set:q$(r,n.mapping,n.doc,i),widgetKeys:i}}function J$(e,t){let n=Object.values(t).flatMap(e=>e.find());return rQ.create(e,n)}function Y$(e){let t=new Set;for(let n of Object.values(e))for(let e of n)t.add(e);return t}function uIe(e,t){switch(t.update??`document`){case`document`:if(t.createInRange)throw Error(`[tiptap error]: Extension "${e}" provides createInRange() but does not use the "changedRanges" decoration update strategy.`);return;case`changedRanges`:if(!t.createInRange)throw Error(`[tiptap error]: Extension "${e}" uses the "changedRanges" decoration update strategy but does not provide createInRange().`);return;case`manual`:if(t.createInRange)throw Error(`[tiptap error]: Extension "${e}" uses the "manual" decoration update strategy, which is not compatible with createInRange(). createInRange() requires the "changedRanges" strategy.`);if(t.shouldUpdate)throw Error(`[tiptap error]: Extension "${e}" cannot combine the "manual" decoration update strategy with shouldUpdate().`);return;default:throw Error(`[tiptap error]: Extension "${e}" uses an unknown decoration update strategy. Expected "document", "changedRanges", or "manual".`)}}function dIe(e,t,n){return n?!0:e.update===`manual`?!1:e.shouldUpdate?e.shouldUpdate(t):t.tr.docChanged}var fIe=new Set,pIe=class{constructor(e){this.warnedWidgetKeys=new Set,this.warnedOutOfRangeExtensions=new Set,this.handleBeforeTransaction=({nextState:e})=>{let t=B$.getState(e);t&&this.warnDuplicateWidgetKeys(t)},this.editor=e.editor,this.entries=this.resolveEntries(e.entries),this.entries.forEach(({name:e,spec:t})=>uIe(e,t)),this.plugin=this.entries.length>0?this.createPlugin():null,this.editor.on(`beforeTransaction`,this.handleBeforeTransaction)}destroy(){this.editor.off(`beforeTransaction`,this.handleBeforeTransaction)}liveWidgetKeys(){return B$.getState(this.editor.state)?.widgetKeys??fIe}get mountedView(){return this.editor.isDestroyed?null:this.editor.view}resolveEntries(e){let t=[];for(let{name:n,addDecorations:r}of e){let e=r();e&&t.push({name:n,spec:e})}return t}createPlugin(){let{editor:e,entries:t}=this;return new dY({key:B$,state:{init:(e,n)=>{let r={},i={};for(let{name:e,spec:a}of t){let{set:t,widgetKeys:o}=this.buildFullSet(e,a,n);r[e]=t,i[e]=o}let a={decorationSetsByExtension:r,widgetKeysByExtension:i,mergedDecorationSet:this.buildMergedSet(n.doc,r),widgetKeys:Y$(i)};return this.warnDuplicateWidgetKeys(a),a},apply:(n,r,i,a)=>{let o=n.getMeta(B$),s=o?.type===`force`&&!o.name,c=o?.type===`force`?o.name:void 0,l={},u={},d=new Set;return $Fe(e,()=>{for(let{name:o,spec:f}of t){let t=s||c===o;if(!dIe(f,{editor:e,tr:n,oldState:i,newState:a},t)){let e=lIe(o,r,n);l[o]=e.set,u[o]=e.widgetKeys}else if(f.update===`changedRanges`&&n.docChanged&&!t){let e=this.applyChangedRangesRecompute(o,f,r,n,a);l[o]=e.set,u[o]=e.widgetKeys,d.add(o)}else{let{set:e,widgetKeys:t}=this.buildFullSet(o,f,a);l[o]=e,u[o]=t,d.add(o)}}}),d.size===0&&!n.docChanged?r:{decorationSetsByExtension:l,widgetKeysByExtension:u,mergedDecorationSet:this.mergeAfterApply({entries:t,previous:r,tr:n,decorationSetsByExtension:l,recomputedNames:d}),widgetKeys:Y$(u)}}},props:{decorations(e){return B$.getState(e)?.mergedDecorationSet??rQ.empty}}})}applyChangedRangesRecompute(e,t,n,r,i){let a=cIe(r,i.doc);return a.type===`full`?this.buildFullSet(e,t,i):this.rebuildRanges(e,t,n,r,i,a.ranges)}rebuildRanges(e,t,n,r,i,a){let o=n.decorationSetsByExtension[e]??rQ.empty,s=new Set(n.widgetKeysByExtension[e]??[]),c=q$(o,r.mapping,r.doc,s),l=i.doc.content.size;for(let{from:n,to:r}of a){let a=c.find(n,r).filter(e=>W$({position:e.from,from:n,to:r,docSize:l}));for(let e of a){let t=G$(e);t&&s.delete(t)}c=c.remove(a);let{decorations:o,widgetKeys:u}=U$(iIe({decorations:this.runCreate(e,`createInRange`,()=>t.createInRange({editor:this.editor,state:i,view:this.mountedView,from:n,to:r})),from:n,to:r,docSize:l,extensionName:e,warnedExtensions:this.warnedOutOfRangeExtensions}),e);c=c.add(i.doc,o);for(let e of u)s.add(e)}return{set:c,widgetKeys:s}}buildFullSet(e,t,n){let r=this.runCreate(e,`create`,()=>t.create({editor:this.editor,state:n,view:this.mountedView}));return rIe(n.doc,r,e)}runCreate(e,t,n){try{return n()}catch(n){return console.error(`[tiptap error]: Extension "${e}" threw in \`addDecorations().${t}()\`. Its decorations were dropped for this update.`,n),[]}}warnDuplicateWidgetKeys(e){if(!H$)return;if(e.widgetKeys.size===0){this.warnedWidgetKeys.clear();return}let t=aIe(e.mergedDecorationSet),n=new Set(t.map(({key:e})=>e));for(let{key:e,extensions:n}of t){if(this.warnedWidgetKeys.has(e))continue;let t=Array.from(n).map(e=>`"${e}"`).join(`, `);console.warn(`[tiptap warn]: Duplicate widget decoration key "${e}" in extension${n.size===1?``:`s`} ${t}. Widget decoration keys must be globally unique, otherwise ProseMirror misplaces the widget DOM. Use a stable, unique key (e.g. \`comment-\${id}\`).`)}this.warnedWidgetKeys=n}buildMergedSet(e,t){let n=Object.keys(t);return n.length===1?t[n[0]]:J$(e,t)}mergeAfterApply({entries:e,previous:t,tr:n,decorationSetsByExtension:r,recomputedNames:i}){return e.length===1?r[e[0].name]:i.size===0?t.mergedDecorationSet.map(n.mapping,n.doc):J$(n.doc,r)}};function mIe(e,t){let{selection:n}=e,{$from:r}=n;if(n instanceof $J){let e=r.index();return r.parent.canReplaceWith(e,e+1,t)}let i=r.depth;for(;i>=0;){let e=r.index(i);if(r.node(i).contentMatchAt(e).matchType(t))return!0;--i}return!1}function hIe(e,t,n){let r=document.querySelector(`style[data-tiptap-style${n?`-${n}`:``}]`);if(r!==null)return r;let i=document.createElement(`style`);return t&&i.setAttribute(`nonce`,t),i.setAttribute(`data-tiptap-style${n?`-${n}`:``}`,``),i.innerHTML=e,document.getElementsByTagName(`head`)[0].appendChild(i),i}function X$(e,t){let n=e.getAttribute(`style`);if(!n)return null;let r=n.split(`;`).map(e=>e.trim()).filter(Boolean),i=t.toLowerCase();for(let e=r.length-1;e>=0;--e){let t=r[e],n=t.indexOf(`:`);if(n!==-1&&t.slice(0,n).trim().toLowerCase()===i)return t.slice(n+1).trim()}return null}function gIe(e){return typeof e==`number`}function _Ie(e){return Object.prototype.toString.call(e).slice(8,-1)}function Z$(e){return _Ie(e)===`Object`?e.constructor===Object&&Object.getPrototypeOf(e)===Object.prototype:!1}function Q$(e,t,n){let r=e.split(`
+`,textSerializers:o={}}=n||{},s=``;return e.nodesBetween(r,i,(e,n,c,l)=>{e.isBlock&&n>r&&(s+=a);let u=o?.[e.type.name];if(u)return c&&(s+=u({node:e,pos:n,parent:c,index:l,range:t})),!1;if(e.isText){var d;s+=e==null||(d=e.text)==null?void 0:d.slice(Math.max(r,n)-n,i-n)}}),s}function vFe(e,t){return T$(e,{from:0,to:e.content.size},t)}function E$(e){return Object.fromEntries(Object.entries(e.nodes).filter(([,e])=>e.spec.toText).map(([e,t])=>[e,t.spec.toText]))}function yFe(e,t){let n=IQ(t,e.schema),{from:r,to:i}=e.selection,a=[];e.doc.nodesBetween(r,i,e=>{a.push(e)});let o=a.reverse().find(e=>e.type.name===n.name);return o?{...o.attrs}:{}}function D$(e,t){let n=i$(typeof t==`string`?t:t.name,e.schema);return n===`node`?yFe(e,t):n===`mark`?s$(e,t):{}}function bFe(e,t=JSON.stringify){let n={};return e.filter(e=>{let r=t(e);return Object.prototype.hasOwnProperty.call(n,r)?!1:n[r]=!0})}function xFe(e){let t=bFe(e);return t.length===1?t:t.filter((e,n)=>!t.filter((e,t)=>t!==n).some(t=>e.oldRange.from>=t.oldRange.from&&e.oldRange.to<=t.oldRange.to&&e.newRange.from>=t.newRange.from&&e.newRange.to<=t.newRange.to))}function O$(e){let{mapping:t,steps:n}=e,r=[];return t.maps.forEach((e,i)=>{let a=[];if(e.ranges.length)e.forEach((e,t)=>{a.push({from:e,to:t})});else{let{from:e,to:t}=n[i];if(e===void 0||t===void 0)return;a.push({from:e,to:t})}a.forEach(({from:e,to:n})=>{let a=t.slice(i).map(e,-1),o=t.slice(i).map(n),s=t.invert().map(a,-1),c=t.invert().map(o);r.push({oldRange:{from:s,to:c},newRange:{from:a,to:o}})})}),xFe(r)}function k$(e,t,n){let r=[];return e===t?n.resolve(e).marks().forEach(t=>{let i=HQ(n.resolve(e),t.type);i&&r.push({mark:t,...i})}):n.nodesBetween(e,t,(e,t)=>{!e||e?.nodeSize===void 0||r.push(...e.marks.map(n=>({from:t,to:t+e.nodeSize,mark:n})))}),r}var SFe=(e,t,n,r=20)=>{let i=e.doc.resolve(n),a=r,o=null;for(;a>0&&o===null;){let e=i.node(a);e?.type.name===t?o=e:--a}return[o,a]},CFe=e=>{let t=e.depth-1;if(t<0)return null;let n=e.index(t);return n===0?null:e.node(t).child(n-1)};function A$(e,t){return t.nodes[e]||t.marks[e]||null}function j$(e,t,n){return Object.fromEntries(Object.entries(n).filter(([n])=>{let r=e.find(e=>e.type===t&&e.name===n);return r?r.attribute.keepOnSplit:!1}))}var wFe=(e,t=500)=>{let n=``,r=e.parentOffset;return e.parent.nodesBetween(Math.max(0,r-t),r,(e,t,i,a)=>{var o;let s=(o=e.type.spec).toText?.call(o,{node:e,pos:t,parent:i,index:a})||e.textContent||`%leaf%`;n+=e.isAtom&&!e.isText?s:s.slice(0,Math.max(0,r-t))}),n};function M$(e,t,n={}){let{empty:r,ranges:i}=e.selection,a=t?UQ(t,e.schema):null;if(r)return!!(e.storedMarks||e.selection.$from.marks()).filter(e=>a?a.name===e.type.name:!0).find(e=>zQ(e.attrs,n,{strict:!1}));let o=0,s=[];if(i.forEach(({$from:t,$to:n})=>{let r=t.pos,i=n.pos;e.doc.nodesBetween(r,i,(e,t)=>{if(a&&e.inlineContent&&!e.type.allowsMarkType(a))return!1;if(!e.isText&&!e.marks.length)return;let n=Math.max(r,t),c=Math.min(i,t+e.nodeSize),l=c-n;o+=l,s.push(...e.marks.map(e=>({mark:e,from:n,to:c})))})}),o===0)return!1;let c=s.filter(e=>a?a.name===e.mark.type.name:!0).filter(e=>zQ(e.mark.attrs,n,{strict:!1})).reduce((e,t)=>e+t.to-t.from,0),l=s.filter(e=>a?e.mark.type!==a&&e.mark.type.excludes(a):!0).reduce((e,t)=>e+t.to-t.from,0);return(c>0?c+l:c)>=o}function TFe(e,t,n={}){if(!t)return r$(e,null,n)||M$(e,null,n);let r=i$(t,e.schema);return r===`node`?r$(e,t,n):r===`mark`?M$(e,t,n):!1}var EFe=(e,t)=>{let{$from:n,$to:r,$anchor:i}=e.selection;if(t){let n=l$(e=>e.type.name===t)(e.selection);if(!n)return!1;let r=e.doc.resolve(n.pos+1);return i.pos+1===r.end()}return!(r.parentOffset<r.parent.nodeSize-2||n.pos!==r.pos)},DFe=e=>{let{$from:t,$to:n}=e.selection;return!(t.parentOffset>0||t.pos!==n.pos)};function N$(e,t){return Array.isArray(t)?t.some(t=>(typeof t==`string`?t:t.name)===e.name):t}function P$(e,t){let{nodeExtensions:n}=h$(t),r=n.find(t=>t.name===e);if(!r)return!1;let i=m$(u$(r,`group`,{name:r.name,options:r.options,storage:r.storage}));return typeof i==`string`?i.split(` `).includes(`list`):!1}function F$(e,{checkChildren:t=!0,ignoreWhitespace:n=!1}={}){if(n){if(e.type.name===`hardBreak`)return!0;if(e.isText)return!/\S/.test(e.text??``)}if(e.isText)return!e.text;if(e.isAtom||e.isLeaf)return!1;if(e.content.childCount===0)return!0;if(t){let r=!0;return e.content.forEach(e=>{r!==!1&&(F$(e,{ignoreWhitespace:n,checkChildren:t})||(r=!1))}),r}return!1}function I$(e){return e instanceof nY}var L$=class e{constructor(e){this.position=e}static fromJSON(t){return new e(t.position)}toJSON(){return{position:this.position}}};function OFe(e,t){let n=t.mapping.mapResult(e.position);return{position:new L$(n.pos),mapResult:n}}function kFe(e){return new L$(e)}function AFe(e,t,n){let{selection:r}=t,i=null;if(WQ(r)&&(i=r.$cursor),i){let t=e.storedMarks??i.marks();return i.parent.type.allowsMarkType(n)&&(!!n.isInSet(t)||!t.some(e=>e.type.excludes(n)))}let{ranges:a}=r;return a.some(({$from:t,$to:r})=>{let i=t.depth===0?e.doc.inlineContent&&e.doc.type.allowsMarkType(n):!1;return e.doc.nodesBetween(t.pos,r.pos,(e,t,r)=>{if(i)return!1;if(e.isInline){let t=!r||r.type.allowsMarkType(n),a=!!n.isInSet(e.marks)||!e.marks.some(e=>e.type.excludes(n));i=t&&a}return!i}),i})}var jFe=(e,t={})=>({tr:n,state:r,dispatch:i})=>{let{selection:a}=n,{empty:o,ranges:s}=a,c=UQ(e,r.schema);if(i)if(o){let e=s$(r,c);n.addStoredMark(c.create({...e,...t}))}else s.forEach(e=>{let i=e.$from.pos,a=e.$to.pos;r.doc.nodesBetween(i,a,(e,r)=>{let o=Math.max(r,i),s=Math.min(r+e.nodeSize,a);e.marks.find(e=>e.type===c)?e.marks.forEach(e=>{c===e.type&&n.addMark(o,s,c.create({...e.attrs,...t}))}):n.addMark(o,s,c.create(t))})});return AFe(r,n,c)},MFe=(e,t)=>({tr:n})=>(n.setMeta(e,t),!0),NFe=(e,t={})=>({state:n,dispatch:r,chain:i})=>{let a=IQ(e,n.schema),o;return n.selection.$anchor.sameParent(n.selection.$head)&&(o=n.selection.$anchor.parent.attrs),a.isTextblock?i().command(({commands:e})=>RY(a,{...o,...t})(n)?!0:e.clearNodes()).command(({state:e})=>RY(a,{...o,...t})(e,r)).run():(console.warn(`[tiptap warn]: Currently "setNode()" only supports text block nodes.`),!1)},PFe=e=>({tr:t,dispatch:n})=>{if(n){let{doc:n}=t,r=GQ(e,0,n.content.size),i=nY.create(n,r);t.setSelection(i)}return!0},FFe=(e,t)=>({tr:n,state:r,dispatch:i})=>{let{selection:a}=r,o,s;return typeof t==`number`?(o=t,s=t):t&&`from`in t&&`to`in t?(o=t.from,s=t.to):(o=a.from,s=a.to),i&&n.doc.nodesBetween(o,s,(t,r)=>{t.isText||n.setNodeMarkup(r,void 0,{...t.attrs,dir:e})}),!0},IFe=e=>({tr:t,dispatch:n})=>{if(n){let{doc:n}=t,{from:r,to:i}=typeof e==`number`?{from:e,to:e}:e,a=eY.atStart(n).from,o=eY.atEnd(n).to,s=GQ(r,a,o),c=GQ(i,a,o),l=eY.create(n,s,c);t.setSelection(l)}return!0},LFe=e=>({state:t,dispatch:n})=>DMe(IQ(e,t.schema))(t,n);function R$(e,t){let n=e.storedMarks||e.selection.$to.parentOffset&&e.selection.$from.marks();if(n){let r=n.filter(e=>t?.includes(e.type.name));e.tr.ensureMarks(r)}}var RFe=({keepMarks:e=!0}={})=>({tr:t,state:n,dispatch:r,editor:i})=>{let{selection:a,doc:o}=t,{$from:s,$to:c}=a,l=i.extensionManager.attributes,u=j$(l,s.node().type.name,s.node().attrs);if(a instanceof nY&&a.node.isBlock)return!s.parentOffset||!jJ(o,s.pos)?!1:(r&&(e&&R$(n,i.extensionManager.splittableMarks),t.split(s.pos).scrollIntoView()),!0);if(!s.parent.isBlock)return!1;let d=c.parentOffset===c.parent.content.size,f=s.depth===0?void 0:t$(s.node(-1).contentMatchAt(s.indexAfter(-1))),p=d&&f?[{type:f,attrs:u}]:void 0,m=jJ(t.doc,t.mapping.map(s.pos),1,p);if(!p&&!m&&jJ(t.doc,t.mapping.map(s.pos),1,f?[{type:f}]:void 0)&&(m=!0,p=f?[{type:f,attrs:u}]:void 0),r){if(m&&(a instanceof eY&&t.deleteSelection(),t.split(t.mapping.map(s.pos),1,p),f&&!d&&!s.parentOffset&&s.parent.type!==f)){let e=t.mapping.map(s.before()),n=t.doc.resolve(e);s.node(-1).canReplaceWith(n.index(),n.index()+1,f)&&t.setNodeMarkup(t.mapping.map(s.before()),f)}e&&R$(n,i.extensionManager.splittableMarks),t.scrollIntoView()}return m},zFe=(e,t={})=>({tr:n,state:r,dispatch:i,editor:a})=>{let o=IQ(e,r.schema),{$from:s,$to:c}=r.selection,l=r.selection.node;if(l&&l.isBlock||s.depth<2||!s.sameParent(c))return!1;let u=s.node(-1);if(u.type!==o)return!1;let d=a.extensionManager.attributes;if(s.parent.content.size===0&&s.node(-1).childCount===s.indexAfter(-1)){if(s.depth===2||s.node(-3).type!==o||s.index(-2)!==s.node(-2).childCount-1)return!1;if(i){let e=lq.empty,r=s.index(-1)?1:s.index(-2)?2:3;for(let t=s.depth-r;t>=s.depth-3;--t)e=lq.from(s.node(t).copy(e));let i=s.indexAfter(-1)<s.node(-2).childCount?1:s.indexAfter(-2)<s.node(-3).childCount?2:3,a={...j$(d,s.node().type.name,s.node().attrs),...t},c=o.contentMatch.defaultType?.createAndFill(a)||void 0;e=e.append(lq.from(o.createAndFill(null,c)||void 0));let l=s.before(s.depth-(r-1));n.replace(l,s.after(-i),new hq(e,4-r,0));let u=-1;n.doc.nodesBetween(l,n.doc.content.size,(e,t)=>{if(u>-1)return!1;e.isTextblock&&e.content.size===0&&(u=t+1)}),u>-1&&n.setSelection(eY.near(n.doc.resolve(u))),n.scrollIntoView()}return!0}let f=c.pos===s.end()?u.contentMatchAt(0).defaultType:null,p={...j$(d,u.type.name,u.attrs),...t},m={...j$(d,s.node().type.name,s.node().attrs),...t};n.delete(s.pos,c.pos);let h=f?[{type:o,attrs:p},{type:f,attrs:m}]:[{type:o,attrs:p}];if(!jJ(n.doc,s.pos,2))return!1;if(i){let{selection:e,storedMarks:t}=r,{splittableMarks:o}=a.extensionManager,c=t||e.$to.parentOffset&&e.$from.marks();if(n.split(s.pos,2,h).scrollIntoView(),!c||!i)return!0;let l=c.filter(e=>o.includes(e.type.name));n.ensureMarks(l)}return!0};function z$(e){return!e||e===`1`?null:e}function B$(e,t){return z$(e)===z$(t)}var V$=(e,t)=>{let n=l$(e=>e.type===t)(e.selection);if(!n)return!0;let r=e.doc.resolve(Math.max(0,n.pos-1)).before(n.depth);if(r===void 0)return!0;let i=e.doc.nodeAt(r);return!(n.node.type===i?.type&&MJ(e.doc,n.pos))||!B$(n.node.attrs.type,i?.attrs.type)||e.join(n.pos),!0},H$=(e,t)=>{let n=l$(e=>e.type===t)(e.selection);if(!n)return!0;let r=e.doc.resolve(n.start).after(n.depth);if(r===void 0)return!0;let i=e.doc.nodeAt(r);return!(n.node.type===i?.type&&MJ(e.doc,r))||!B$(n.node.attrs.type,i?.attrs.type)||e.join(r),!0};function BFe(e){let t=e.doc,n=t.firstChild;if(!n)return null;let r=t.resolve(1),i=t.resolve(n.nodeSize-1);return eY.between(r,i)}var VFe=(e,t,n,r={})=>({editor:i,tr:a,state:o,dispatch:s,chain:c,commands:l,can:u})=>{let{extensions:d,splittableMarks:f}=i.extensionManager,p=IQ(e,o.schema),m=IQ(t,o.schema),{selection:h,storedMarks:g}=o,{$from:_,$to:v}=h,y=_.blockRange(v),b=g||h.$to.parentOffset&&h.$from.marks();if(!y)return!1;let x=l$(e=>P$(e.type.name,d))(h),S=h.from===0&&h.to===o.doc.content.size,C=o.doc.content.content,w=C.length===1?C[0]:null,T=S&&w&&P$(w.type.name,d)?{node:w,pos:0,depth:0}:null,E=x??T,D=!!x&&y.depth>=1&&y.depth-x.depth<=1,O=!!T;if((D||O)&&E){if(E.node.type===p)return S&&O?c().command(({tr:e,dispatch:t})=>{let n=BFe(e);return n?(e.setSelection(n),t&&t(e),!0):!1}).liftListItem(m).run():l.liftListItem(m);if(P$(E.node.type.name,d)&&p.validContent(E.node.content))return c().command(()=>(a.setNodeMarkup(E.pos,p),!0)).command(()=>V$(a,p)).command(()=>H$(a,p)).run()}return!n||!b||!s?c().command(()=>u().wrapInList(p,r)?!0:l.clearNodes()).wrapInList(p,r).command(()=>V$(a,p)).command(()=>H$(a,p)).run():c().command(()=>{let e=u().wrapInList(p,r),t=b.filter(e=>f.includes(e.type.name));return a.ensureMarks(t),e?!0:l.clearNodes()}).wrapInList(p,r).command(()=>V$(a,p)).command(()=>H$(a,p)).run()},HFe=(e,t={},n={})=>({state:r,commands:i})=>{let{extendEmptyMarkRange:a=!1}=n,o=UQ(e,r.schema);return M$(r,o,t)?i.unsetMark(o,{extendEmptyMarkRange:a}):i.setMark(o,t)},UFe=(e,t,n={})=>({state:r,commands:i})=>{let a=IQ(e,r.schema),o=IQ(t,r.schema),s=r$(r,a,n),c;return r.selection.$anchor.sameParent(r.selection.$head)&&(c=r.selection.$anchor.parent.attrs),s?i.setNode(o,c):i.setNode(a,{...c,...n})},WFe=(e,t={})=>({state:n,commands:r})=>{let i=IQ(e,n.schema);return r$(n,i,t)?r.lift(i):r.wrapIn(i,t)},GFe=()=>({state:e,dispatch:t})=>{let n=e.plugins;for(let r=0;r<n.length;r+=1){let i=n[r],a;if(i.spec.isInputRules&&(a=i.getState(e))){if(t){let t=e.tr,n=a.transform;for(let e=n.steps.length-1;e>=0;--e)t.step(n.steps[e].invert(n.docs[e]));if(a.text){let n=t.doc.resolve(a.from).marks();t.replaceWith(a.from,a.to,e.schema.text(a.text,n))}else t.delete(a.from,a.to)}return!0}}return!1},KFe=(e={})=>({tr:t,dispatch:n,editor:r})=>{let{ignoreClearable:i=!1}=e,{selection:a}=t,{empty:o,ranges:s}=a;if(o)return!0;let{nonClearableMarks:c}=r.extensionManager;if(n){let e=Object.values(r.schema.marks).filter(e=>i||!c.includes(e.name));s.forEach(n=>{for(let r of e)t.removeMark(n.$from.pos,n.$to.pos,r)})}return!0},qFe=(e,t={})=>({tr:n,state:r,dispatch:i})=>{let{extendEmptyMarkRange:a=!1}=t,{selection:o}=n,s=UQ(e,r.schema),{$from:c,empty:l,ranges:u}=o;if(!i)return!0;if(l&&a){let{from:e,to:t}=o,r=HQ(c,s,c.marks().find(e=>e.type===s)?.attrs);r&&(e=r.from,t=r.to),n.removeMark(e,t,s)}else u.forEach(e=>{n.removeMark(e.$from.pos,e.$to.pos,s)});return n.removeStoredMark(s),!0},JFe=e=>({tr:t,state:n,dispatch:r})=>{let{selection:i}=n,a,o;return typeof e==`number`?(a=e,o=e):e&&`from`in e&&`to`in e?(a=e.from,o=e.to):(a=i.from,o=i.to),r&&t.doc.nodesBetween(a,o,(e,n)=>{if(e.isText)return;let r={...e.attrs};delete r.dir,t.setNodeMarkup(n,void 0,r)}),!0},YFe=(e,t={})=>({tr:n,state:r,dispatch:i})=>{let a=null,o=null,s=i$(typeof e==`string`?e:e.name,r.schema);if(!s)return!1;s===`node`&&(a=IQ(e,r.schema)),s===`mark`&&(o=UQ(e,r.schema));let c=!1;return n.selection.ranges.forEach(e=>{let s=e.$from.pos,l=e.$to.pos,u,d,f,p;n.selection.empty?r.doc.nodesBetween(s,l,(e,t)=>{a&&a===e.type&&(c=!0,f=Math.max(t,s),p=Math.min(t+e.nodeSize,l),u=t,d=e)}):r.doc.nodesBetween(s,l,(e,r)=>{r<s&&a&&a===e.type&&(c=!0,f=Math.max(r,s),p=Math.min(r+e.nodeSize,l),u=r,d=e),r>=s&&r<=l&&(a&&a===e.type&&(c=!0,i&&n.setNodeMarkup(r,void 0,{...e.attrs,...t})),o&&e.marks.length&&e.marks.forEach(a=>{if(o===a.type&&(c=!0,i)){let i=Math.max(r,s),c=Math.min(r+e.nodeSize,l);n.addMark(i,c,o.create({...a.attrs,...t}))}}))}),d&&(u!==void 0&&i&&n.setNodeMarkup(u,void 0,{...d.attrs,...t}),o&&d.marks.length&&d.marks.forEach(e=>{o===e.type&&i&&n.addMark(f,p,o.create({...e.attrs,...t}))}))}),c},U$=new _Y(`__tiptap_decorations__`),XFe=e=>({tr:t,dispatch:n})=>(n&&t.setMeta(U$,{type:`force`,name:e}),!0),ZFe=(e,t={})=>({state:n,dispatch:r})=>yMe(IQ(e,n.schema),t)(n,r),QFe=(e,t={})=>({state:n,dispatch:r})=>xMe(IQ(e,n.schema),t)(n,r),$Fe=lje({blur:()=>bPe,clearContent:()=>xPe,clearNodes:()=>SPe,command:()=>CPe,createParagraphNear:()=>wPe,cut:()=>TPe,deleteCurrentNode:()=>EPe,deleteNode:()=>DPe,deleteRange:()=>OPe,deleteSelection:()=>jPe,enter:()=>MPe,exitCode:()=>NPe,extendMarkRange:()=>PPe,first:()=>FPe,focus:()=>LPe,forEach:()=>RPe,insertContent:()=>zPe,insertContentAt:()=>BPe,insertDefaultBlock:()=>VPe,joinBackward:()=>WPe,joinDown:()=>UPe,joinForward:()=>GPe,joinItemBackward:()=>KPe,joinItemForward:()=>qPe,joinTextblockBackward:()=>JPe,joinTextblockForward:()=>YPe,joinUp:()=>HPe,keyboardShortcut:()=>ZPe,lift:()=>QPe,liftEmptyBlock:()=>$Pe,liftListItem:()=>eFe,newlineInCode:()=>tFe,resetAttributes:()=>nFe,scrollIntoView:()=>rFe,selectAll:()=>iFe,selectNodeBackward:()=>aFe,selectNodeForward:()=>oFe,selectParentNode:()=>sFe,selectTextblockEnd:()=>cFe,selectTextblockStart:()=>lFe,setContent:()=>uFe,setMark:()=>jFe,setMeta:()=>MFe,setNode:()=>NFe,setNodeSelection:()=>PFe,setTextDirection:()=>FFe,setTextSelection:()=>IFe,sinkListItem:()=>LFe,splitBlock:()=>RFe,splitListItem:()=>zFe,toggleList:()=>VFe,toggleMark:()=>HFe,toggleNode:()=>UFe,toggleWrap:()=>WFe,undoInputRule:()=>GFe,unsetAllMarks:()=>KFe,unsetMark:()=>qFe,unsetTextDirection:()=>JFe,updateAttributes:()=>YFe,updateDecorations:()=>XFe,wrapIn:()=>ZFe,wrapInList:()=>QFe}),W$=new WeakMap;function eIe(e,t){W$.set(e,(W$.get(e)??0)+1);try{return t()}finally{let t=(W$.get(e)??1)-1;t>0?W$.set(e,t):W$.delete(e)}}function tIe(e){return W$.has(e)}var nIe=class{constructor(){this.callbacks={}}on(e,t){return this.callbacks[e]||(this.callbacks[e]=[]),this.callbacks[e].push(t),this}emit(e,...t){let n=this.callbacks[e];return n&&n.forEach(e=>e.apply(this,t)),this}off(e,t){let n=this.callbacks[e];return n&&(t?this.callbacks[e]=n.filter(e=>e!==t):delete this.callbacks[e]),this}once(e,t){let n=(...r)=>{this.off(e,n),t.apply(this,r)};return this.on(e,n)}removeAllListeners(){this.callbacks={}}},G$=typeof process<`u`&&!1;function rIe(e){return e.kind===`widget`}function K$(e,t){let n=[],r=new Set;for(let i of e)i.kind===`widget`&&rIe(i)&&r.add(i.key),n.push(i.toPMDecoration(t));return{decorations:n,widgetKeys:r}}function iIe(e,t,n){let{decorations:r,widgetKeys:i}=K$(t,n);return{set:oQ.create(e,r),widgetKeys:i}}function q$({position:e,from:t,to:n,docSize:r}){return e<t?!1:e<n?!0:e===n&&n===r}function aIe({decorations:e,from:t,to:n,docSize:r,extensionName:i,warnedExtensions:a}){return e.filter(e=>q$({position:e.anchor,from:t,to:n,docSize:r})?!0:(e.anchor===n||a.has(i)||(a.add(i),console.warn(`[tiptap warn]: Extension "${i}" returned a decoration outside the requested range [${t}, ${n}). It was ignored.`)),!1))}function J$(e){let t=e.spec?.key;return typeof t==`string`?t:void 0}function oIe(e){let t=new Map,n=new Map;for(let r of e.find()){let e=J$(r);if(!e)continue;let i=r.spec.extensionName??`unknown`,a=t.get(e)??new Set;a.add(i),t.set(e,a),n.set(e,(n.get(e)??0)+1)}return Array.from(t,([e,t])=>({key:e,extensions:t})).filter(({key:e})=>(n.get(e)??0)>1)}function Y$(e){return e.jsonID===`attr`}function sIe(e){let t=!1;if(e.getMap().forEach(()=>{t=!0}),t||Y$(e))return!0;let n=e;return typeof n.from==`number`&&typeof n.to==`number`}function cIe(e,t){let n=null,r=0,i=0;for(let a=0;a<e.childCount&&!(i>t.to);a+=1){let o=i+e.child(a).nodeSize;o>=t.from&&(n===null&&(n=i),r=o),i=o}return n===null?null:{from:n,to:r}}function lIe(e,t){if(e.steps.some(e=>!sIe(e)))return{type:`full`};let n=O$(e).map(({newRange:e})=>e);e.steps.forEach((t,r)=>{if(!Y$(t))return;let i=e.mapping.slice(r);n.push({from:i.map(t.pos,-1),to:i.map(t.pos+1)})});let r=[];for(let e of n){let n=cIe(t,e);n&&r.push(n)}r.sort((e,t)=>e.from-t.from);let i=[];for(let e of r){let t=i[i.length-1];t&&e.from<=t.to?t.to=Math.max(t.to,e.to):i.push({...e})}return{type:`ranges`,ranges:i}}function X$(e,t,n,r){return e.map(t,n,{onRemove:e=>{let t=e?.key;typeof t==`string`&&r.delete(t)}})}function uIe(e,t,n){let r=t.decorationSetsByExtension[e]??oQ.empty,i=new Set(t.widgetKeysByExtension[e]??[]);return{set:X$(r,n.mapping,n.doc,i),widgetKeys:i}}function Z$(e,t){let n=Object.values(t).flatMap(e=>e.find());return oQ.create(e,n)}function Q$(e){let t=new Set;for(let n of Object.values(e))for(let e of n)t.add(e);return t}function dIe(e,t){switch(t.update??`document`){case`document`:if(t.createInRange)throw Error(`[tiptap error]: Extension "${e}" provides createInRange() but does not use the "changedRanges" decoration update strategy.`);return;case`changedRanges`:if(!t.createInRange)throw Error(`[tiptap error]: Extension "${e}" uses the "changedRanges" decoration update strategy but does not provide createInRange().`);return;case`manual`:if(t.createInRange)throw Error(`[tiptap error]: Extension "${e}" uses the "manual" decoration update strategy, which is not compatible with createInRange(). createInRange() requires the "changedRanges" strategy.`);if(t.shouldUpdate)throw Error(`[tiptap error]: Extension "${e}" cannot combine the "manual" decoration update strategy with shouldUpdate().`);return;default:throw Error(`[tiptap error]: Extension "${e}" uses an unknown decoration update strategy. Expected "document", "changedRanges", or "manual".`)}}function fIe(e,t,n){return n?!0:e.update===`manual`?!1:e.shouldUpdate?e.shouldUpdate(t):t.tr.docChanged}var pIe=new Set,mIe=class{constructor(e){this.warnedWidgetKeys=new Set,this.warnedOutOfRangeExtensions=new Set,this.handleBeforeTransaction=({nextState:e})=>{let t=U$.getState(e);t&&this.warnDuplicateWidgetKeys(t)},this.editor=e.editor,this.entries=this.resolveEntries(e.entries),this.entries.forEach(({name:e,spec:t})=>dIe(e,t)),this.plugin=this.entries.length>0?this.createPlugin():null,this.editor.on(`beforeTransaction`,this.handleBeforeTransaction)}destroy(){this.editor.off(`beforeTransaction`,this.handleBeforeTransaction)}liveWidgetKeys(){return U$.getState(this.editor.state)?.widgetKeys??pIe}get mountedView(){return this.editor.isDestroyed?null:this.editor.view}resolveEntries(e){let t=[];for(let{name:n,addDecorations:r}of e){let e=r();e&&t.push({name:n,spec:e})}return t}createPlugin(){let{editor:e,entries:t}=this;return new mY({key:U$,state:{init:(e,n)=>{let r={},i={};for(let{name:e,spec:a}of t){let{set:t,widgetKeys:o}=this.buildFullSet(e,a,n);r[e]=t,i[e]=o}let a={decorationSetsByExtension:r,widgetKeysByExtension:i,mergedDecorationSet:this.buildMergedSet(n.doc,r),widgetKeys:Q$(i)};return this.warnDuplicateWidgetKeys(a),a},apply:(n,r,i,a)=>{let o=n.getMeta(U$),s=o?.type===`force`&&!o.name,c=o?.type===`force`?o.name:void 0,l={},u={},d=new Set;return eIe(e,()=>{for(let{name:o,spec:f}of t){let t=s||c===o;if(!fIe(f,{editor:e,tr:n,oldState:i,newState:a},t)){let e=uIe(o,r,n);l[o]=e.set,u[o]=e.widgetKeys}else if(f.update===`changedRanges`&&n.docChanged&&!t){let e=this.applyChangedRangesRecompute(o,f,r,n,a);l[o]=e.set,u[o]=e.widgetKeys,d.add(o)}else{let{set:e,widgetKeys:t}=this.buildFullSet(o,f,a);l[o]=e,u[o]=t,d.add(o)}}}),d.size===0&&!n.docChanged?r:{decorationSetsByExtension:l,widgetKeysByExtension:u,mergedDecorationSet:this.mergeAfterApply({entries:t,previous:r,tr:n,decorationSetsByExtension:l,recomputedNames:d}),widgetKeys:Q$(u)}}},props:{decorations(e){return U$.getState(e)?.mergedDecorationSet??oQ.empty}}})}applyChangedRangesRecompute(e,t,n,r,i){let a=lIe(r,i.doc);return a.type===`full`?this.buildFullSet(e,t,i):this.rebuildRanges(e,t,n,r,i,a.ranges)}rebuildRanges(e,t,n,r,i,a){let o=n.decorationSetsByExtension[e]??oQ.empty,s=new Set(n.widgetKeysByExtension[e]??[]),c=X$(o,r.mapping,r.doc,s),l=i.doc.content.size;for(let{from:n,to:r}of a){let a=c.find(n,r).filter(e=>q$({position:e.from,from:n,to:r,docSize:l}));for(let e of a){let t=J$(e);t&&s.delete(t)}c=c.remove(a);let{decorations:o,widgetKeys:u}=K$(aIe({decorations:this.runCreate(e,`createInRange`,()=>t.createInRange({editor:this.editor,state:i,view:this.mountedView,from:n,to:r})),from:n,to:r,docSize:l,extensionName:e,warnedExtensions:this.warnedOutOfRangeExtensions}),e);c=c.add(i.doc,o);for(let e of u)s.add(e)}return{set:c,widgetKeys:s}}buildFullSet(e,t,n){let r=this.runCreate(e,`create`,()=>t.create({editor:this.editor,state:n,view:this.mountedView}));return iIe(n.doc,r,e)}runCreate(e,t,n){try{return n()}catch(n){return console.error(`[tiptap error]: Extension "${e}" threw in \`addDecorations().${t}()\`. Its decorations were dropped for this update.`,n),[]}}warnDuplicateWidgetKeys(e){if(!G$)return;if(e.widgetKeys.size===0){this.warnedWidgetKeys.clear();return}let t=oIe(e.mergedDecorationSet),n=new Set(t.map(({key:e})=>e));for(let{key:e,extensions:n}of t){if(this.warnedWidgetKeys.has(e))continue;let t=Array.from(n).map(e=>`"${e}"`).join(`, `);console.warn(`[tiptap warn]: Duplicate widget decoration key "${e}" in extension${n.size===1?``:`s`} ${t}. Widget decoration keys must be globally unique, otherwise ProseMirror misplaces the widget DOM. Use a stable, unique key (e.g. \`comment-\${id}\`).`)}this.warnedWidgetKeys=n}buildMergedSet(e,t){let n=Object.keys(t);return n.length===1?t[n[0]]:Z$(e,t)}mergeAfterApply({entries:e,previous:t,tr:n,decorationSetsByExtension:r,recomputedNames:i}){return e.length===1?r[e[0].name]:i.size===0?t.mergedDecorationSet.map(n.mapping,n.doc):Z$(n.doc,r)}};function hIe(e,t){let{selection:n}=e,{$from:r}=n;if(n instanceof nY){let e=r.index();return r.parent.canReplaceWith(e,e+1,t)}let i=r.depth;for(;i>=0;){let e=r.index(i);if(r.node(i).contentMatchAt(e).matchType(t))return!0;--i}return!1}function gIe(e,t,n){let r=document.querySelector(`style[data-tiptap-style${n?`-${n}`:``}]`);if(r!==null)return r;let i=document.createElement(`style`);return t&&i.setAttribute(`nonce`,t),i.setAttribute(`data-tiptap-style${n?`-${n}`:``}`,``),i.innerHTML=e,document.getElementsByTagName(`head`)[0].appendChild(i),i}function $$(e,t){let n=e.getAttribute(`style`);if(!n)return null;let r=n.split(`;`).map(e=>e.trim()).filter(Boolean),i=t.toLowerCase();for(let e=r.length-1;e>=0;--e){let t=r[e],n=t.indexOf(`:`);if(n!==-1&&t.slice(0,n).trim().toLowerCase()===i)return t.slice(n+1).trim()}return null}function _Ie(e){return typeof e==`number`}function vIe(e){return Object.prototype.toString.call(e).slice(8,-1)}function e1(e){return vIe(e)===`Object`?e.constructor===Object&&Object.getPrototypeOf(e)===Object.prototype:!1}function t1(e,t,n){let r=e.split(`
 `),i=[],a=``,o=0,s=t.baseIndentSize||2;for(;o<r.length;){let e=r[o],u=e.match(t.itemPattern);if(!u){if(i.length>0)break;if(e.trim()===``){o+=1,a=`${a}${e}\n`;continue}else return}let d=t.extractItemData(u),{indentLevel:f,mainContent:p}=d;a=`${a}${e}\n`;let m=[p];for(o+=1;o<r.length;){var c;let e=r[o];if(e.trim()===``){var l;let t=r.slice(o+1).findIndex(e=>e.trim()!==``);if(t===-1)break;if((((l=r[o+1+t].match(/^(\s*)/))==null||(l=l[1])==null?void 0:l.length)||0)>f){m.push(e),a=`${a}${e}\n`,o+=1;continue}else break}if((((c=e.match(/^(\s*)/))==null||(c=c[1])==null?void 0:c.length)||0)>f)m.push(e),a=`${a}${e}\n`,o+=1;else break}let h,g=m.slice(1);if(g.length>0){let e=g.map(e=>e.slice(f+s)).join(`
-`);e.trim()&&(h=t.customNestedParser?t.customNestedParser(e):n.blockTokens(e))}let _=t.createToken(d,h);i.push(_)}if(i.length!==0)return{items:i,raw:a}}var $$=4;function e1(e){let t=0;for(let n of e)t=n===`	`?t+$$-t%$$:t+1;return t}function t1(e,t,n,r,i){if(!e||!Array.isArray(e.content))return``;let a=typeof n==`function`?n(r):n,[o,...s]=e.content,c=`${a}${t.renderChildren([o])}`;return s&&s.length>0&&s.forEach((e,n)=>{let r=t.renderChild?.call(t,e,n+1)??t.renderChildren([e]);if(r!=null){let n=e=>{if(!i?.alignNestedToPrefix)return t.indent(e);let n=t.indent(``),r=e1(a);return(e1(n)>=r?n:` `.repeat(r))+e},o=r.split(`
+`);e.trim()&&(h=t.customNestedParser?t.customNestedParser(e):n.blockTokens(e))}let _=t.createToken(d,h);i.push(_)}if(i.length!==0)return{items:i,raw:a}}var n1=4;function r1(e){let t=0;for(let n of e)t=n===`	`?t+n1-t%n1:t+1;return t}function i1(e,t,n,r,i){if(!e||!Array.isArray(e.content))return``;let a=typeof n==`function`?n(r):n,[o,...s]=e.content,c=`${a}${t.renderChildren([o])}`;return s&&s.length>0&&s.forEach((e,n)=>{let r=t.renderChild?.call(t,e,n+1)??t.renderChildren([e]);if(r!=null){let n=e=>{if(!i?.alignNestedToPrefix)return t.indent(e);let n=t.indent(``),r=r1(a);return(r1(n)>=r?n:` `.repeat(r))+e},o=r.split(`
 `).map(e=>n(e||``)).join(`
-`);c+=e.type===`paragraph`?`\n\n${o}`:`\n${o}`}}),c}function n1(e,t){let n={...e};return Z$(e)&&Z$(t)&&Object.keys(t).forEach(r=>{Z$(t[r])&&Z$(e[r])?n[r]=n1(e[r],t[r]):n[r]=t[r]}),n}function vIe(e,t,n={}){let{state:r}=t,{doc:i,tr:a}=r,o=e;i.descendants((t,r)=>{let i=a.mapping.map(r),s=a.mapping.map(r)+t.nodeSize,c=null;if(t.marks.forEach(e=>{if(e!==o)return!1;c=e}),!c)return;let l=!1;if(Object.keys(n).forEach(e=>{n[e]!==c.attrs[e]&&(l=!0)}),l){let t=e.type.create({...e.attrs,...n});a.removeMark(i,s,e.type),a.addMark(i,s,t)}}),a.docChanged&&t.view.dispatch(a)}var r1=class{constructor(e){this.find=e.find,this.handler=e.handler,this.undoable=e.undoable??!0}},yIe=(e,t)=>{if(FQ(t))return t.exec(e);let n=t(e);if(!n)return null;let r=[n.text];return r.index=n.index,r.input=e,r.data=n.data,n.replaceWith&&(n.text.includes(n.replaceWith)||console.warn(`[tiptap warn]: "inputRuleMatch.replaceWith" must be part of "inputRuleMatch.text".`),r.push(n.replaceWith)),r};function i1(e){let{editor:t,from:n,to:r,text:i,rules:a,plugin:o}=e,{view:s}=t;if(s.composing)return!1;let c=s.state.doc.resolve(n);if(c.parent.type.spec.code||(c.nodeBefore||c.nodeAfter)?.marks.find(e=>e.type.spec.code))return!1;let l=!1,u=CFe(c)+i;return a.forEach(e=>{if(l)return;let a=yIe(u,e.find);if(!a)return;let d=a[0].length-i.length;if(d>0){let e=c.parentOffset-d;if(e<0||c.parent.textBetween(e,c.parentOffset)!==a[0].slice(0,d))return}let f=s.state.tr,p=jQ({state:s.state,transaction:f}),m={from:n-(a[0].length-i.length),to:r},{commands:h,chain:g,can:_}=new MQ({editor:t,state:p});e.handler({state:p,range:m,match:a,commands:h,chain:g,can:_})===null||!f.steps.length||(e.undoable&&f.setMeta(o,{transform:f,from:n,to:r,text:i}),s.dispatch(f),l=!0)}),l}function bIe(e){let{editor:t,rules:n}=e,r=new dY({state:{init(){return null},apply(e,i,a){let o=e.getMeta(r);if(o)return o;let s=e.getMeta(`applyInputRules`);return s&&setTimeout(()=>{let{text:e}=s;e=typeof e==`string`?e:l$(oq.from(e),a.schema);let{from:i}=s;i1({editor:t,from:i,to:i+e.length,text:e,rules:n,plugin:r})}),e.selectionSet||e.docChanged?null:i}},props:{handleTextInput(e,i,a,o){return i1({editor:t,from:i,to:a,text:o,rules:n,plugin:r})},handleDOMEvents:{compositionend:e=>(setTimeout(()=>{let{$cursor:i}=e.state.selection;i&&i1({editor:t,from:i.pos,to:i.pos,text:``,rules:n,plugin:r})}),!1)},handleKeyDown(e,i){if(i.key!==`Enter`)return!1;let{$cursor:a}=e.state.selection;return a?i1({editor:t,from:a.pos,to:a.pos,text:`
-`,rules:n,plugin:r}):!1}},isInputRules:!0});return r}var a1=class{constructor(e={}){this.type=`extendable`,this.parent=null,this.child=null,this.name=``,this.config={name:this.name},this.config={...this.config,...e},this.name=this.config.name}get options(){return{...d$(s$(this,`addOptions`,{name:this.name}))}}get storage(){return{...d$(s$(this,`addStorage`,{name:this.name,options:this.options}))}}configure(e={}){let t=this.extend({...this.config,addOptions:()=>n1(this.options,e)});return t.name=this.name,t.parent=this.parent,this.child=null,t}extend(e={}){let t=new this.constructor({...this.config,...e});return t.parent=this,this.child=t,t.name=`name`in e?e.name:t.parent.name,t}},o1=class e extends a1{constructor(...e){super(...e),this.type=`mark`}static create(t={}){return new e(typeof t==`function`?t():t)}static handleExit({editor:e,mark:t}){let{tr:n}=e.state,r=e.state.selection.$from;if(r.pos===r.end()){let i=r.marks();if(!i.find(e=>e?.type.name===t.name))return!1;let a=i.find(e=>e?.type.name===t.name);return a&&n.removeStoredMark(a),n.insertText(` `,r.pos),e.view.dispatch(n),!0}return!1}configure(e){return super.configure(e)}extend(e){let t=typeof e==`function`?e():e;return super.extend(t)}},s1=class{constructor(e){this.find=e.find,this.handler=e.handler}},xIe=(e,t,n)=>{if(FQ(t))return[...e.matchAll(t)];let r=t(e,n);return r?r.map(t=>{let n=[t.text];return n.index=t.index,n.input=e,n.data=t.data,t.replaceWith&&(t.text.includes(t.replaceWith)||console.warn(`[tiptap warn]: "pasteRuleMatch.replaceWith" must be part of "pasteRuleMatch.text".`),n.push(t.replaceWith)),n}):[]};function SIe(e){let{editor:t,state:n,from:r,to:i,rule:a,pasteEvent:o,dropEvent:s}=e,{commands:c,chain:l,can:u}=new MQ({editor:t,state:n}),d=[];return n.doc.nodesBetween(r,i,(e,t)=>{var f;if(!((f=e.type)==null||(f=f.spec)==null)&&f.code||!(e.isText||e.isTextblock||e.isInline))return;let p=e.content?.size??e.nodeSize??0,m=Math.max(r,t),h=Math.min(i,t+p);m>=h||xIe(e.isText?e.text||``:e.textBetween(m-t,h-t,void 0,``),a.find,o).forEach(e=>{if(e.index===void 0)return;let t=m+e.index+1,r=t+e[0].length,i={from:n.tr.mapping.map(t),to:n.tr.mapping.map(r)},f=a.handler({state:n,range:i,match:e,commands:c,chain:l,can:u,pasteEvent:o,dropEvent:s});d.push(f)})}),d.every(e=>e!==null)}var c1=null,CIe=e=>{var t;let n=new ClipboardEvent(`paste`,{clipboardData:new DataTransfer});return(t=n.clipboardData)==null||t.setData(`text/html`,e),n};function wIe(e){let{editor:t,rules:n}=e,r=null,i=!1,a=!1,o=typeof ClipboardEvent<`u`?new ClipboardEvent(`paste`):null,s;try{s=typeof DragEvent<`u`?new DragEvent(`drop`):null}catch{s=null}let c=({state:e,from:n,to:r,rule:i,pasteEvt:a})=>{let c=e.tr;if(!(!SIe({editor:t,state:jQ({state:e,transaction:c}),from:Math.max(n-1,0),to:r.b-1,rule:i,pasteEvent:a,dropEvent:s})||!c.steps.length)){try{s=typeof DragEvent<`u`?new DragEvent(`drop`):null}catch{s=null}return o=typeof ClipboardEvent<`u`?new ClipboardEvent(`paste`):null,c}};return n.map(e=>new dY({view(e){let n=n=>{r=e.dom.parentElement?.contains(n.target)?e.dom.parentElement:null,r&&(c1=t)},i=()=>{c1&&=null};return window.addEventListener(`dragstart`,n),window.addEventListener(`dragend`,i),{destroy(){window.removeEventListener(`dragstart`,n),window.removeEventListener(`dragend`,i)}}},props:{handleDOMEvents:{drop:(e,t)=>{if(a=r===e.dom.parentElement,s=t,!a){let e=c1;e?.isEditable&&setTimeout(()=>{let t=e.state.selection;t&&e.commands.deleteRange({from:t.from,to:t.to})},10)}return!1},paste:(e,t)=>{let n=t.clipboardData?.getData(`text/html`);return o=t,i=!!n?.includes(`data-pm-slice`),!1}}},appendTransaction:(t,n,r)=>{let s=t[0],l=s.getMeta(`uiEvent`)===`paste`&&!i,u=s.getMeta(`uiEvent`)===`drop`&&!a,d=s.getMeta(`applyPasteRules`),f=!!d;if(!l&&!u&&!f)return;if(f){let{text:t}=d;t=typeof t==`string`?t:l$(oq.from(t),r.schema);let{from:n}=d,i=n+t.length,a=CIe(t);return c({rule:e,state:r,from:n,to:{b:i},pasteEvt:a})}let p=n.doc.content.findDiffStart(r.doc.content),m=n.doc.content.findDiffEnd(r.doc.content);if(!(!gIe(p)||!m||p===m.b))return c({rule:e,state:r,from:p,to:m,pasteEvt:o})}}))}var l1=class{constructor(e,t){this.splittableMarks=[],this.nonClearableMarks=[],this.decorationManager=null,this.editor=t,this.baseExtensions=e,this.extensions=x$(e),this.schema=hFe(this.extensions,t),this.setupExtensions()}get commands(){return this.extensions.reduce((e,t)=>{let n=s$(t,`addCommands`,{name:t.name,options:t.options,storage:this.editor.extensionStorage[t.name],editor:this.editor,type:D$(t.name,this.schema)});return n?{...e,...n()}:e},{})}get plugins(){let{editor:e}=this,t=b$([...this.extensions].reverse()).flatMap(t=>{let n={name:t.name,options:t.options,storage:this.editor.extensionStorage[t.name],editor:e,type:D$(t.name,this.schema)},r=[],i=s$(t,`addKeyboardShortcuts`,n),a={};if(t.type===`mark`&&s$(t,`exitable`,n)&&(a.ArrowRight=()=>o1.handleExit({editor:e,mark:t})),i){let t=Object.fromEntries(Object.entries(i()).map(([t,n])=>[t,()=>n({editor:e})]));a={...a,...t}}let o=vPe(a);r.push(o);let s=s$(t,`addInputRules`,n);if(A$(t,e.options.enableInputRules)&&s){let t=s();if(t&&t.length){let n=bIe({editor:e,rules:t}),i=Array.isArray(n)?n:[n];r.push(...i)}}let c=s$(t,`addPasteRules`,n);if(A$(t,e.options.enablePasteRules)&&c){let t=c();if(t&&t.length){let n=wIe({editor:e,rules:t});r.push(...n)}}let l=s$(t,`addProseMirrorPlugins`,n);if(l){let e=l();r.push(...e)}return r}),n=this.createDecorationPlugin();return n&&t.push(n),t}createDecorationPlugin(){var e;let{editor:t}=this;(e=this.decorationManager)==null||e.destroy();let n=[];return this.extensions.forEach(e=>{let r=s$(e,`addDecorations`,{name:e.name,options:e.options,storage:this.editor.extensionStorage[e.name],editor:t,type:D$(e.name,this.schema)});r&&n.push({name:e.name,addDecorations:r})}),this.decorationManager=new pIe({editor:t,entries:n}),this.decorationManager.plugin}get attributes(){return p$(this.extensions)}get nodeViews(){let{editor:e}=this,{nodeExtensions:t}=f$(this.extensions);return Object.fromEntries(t.filter(e=>!!s$(e,`addNodeView`)).map(t=>{let n=this.attributes.filter(e=>e.type===t.name),r=s$(t,`addNodeView`,{name:t.name,options:t.options,storage:this.editor.extensionStorage[t.name],editor:e,type:NQ(t.name,this.schema)});if(!r)return[];let i=r();return i?[t.name,(r,a,o,s,c)=>i({node:r,view:a,getPos:o,decorations:s,innerDecorations:c,editor:e,extension:t,HTMLAttributes:g$(r,n)})]:[]}))}dispatchTransaction(e){let{editor:t}=this;return b$([...this.extensions].reverse()).reduceRight((e,n)=>{let r={name:n.name,options:n.options,storage:this.editor.extensionStorage[n.name],editor:t,type:D$(n.name,this.schema)},i=s$(n,`dispatchTransaction`,r);return i?t=>{i.call(r,{transaction:t,next:e})}:e},e)}transformPastedHTML(e){let{editor:t}=this;return b$([...this.extensions]).reduce((e,n)=>{let r={name:n.name,options:n.options,storage:this.editor.extensionStorage[n.name],editor:t,type:D$(n.name,this.schema)},i=s$(n,`transformPastedHTML`,r);return i?(t,n)=>{let a=e(t,n);return i.call(r,a)}:e},e||(e=>e))}get markViews(){let{editor:e}=this,{markExtensions:t}=f$(this.extensions);return Object.fromEntries(t.filter(e=>!!s$(e,`addMarkView`)).map(t=>{let n=this.attributes.filter(e=>e.type===t.name),r=s$(t,`addMarkView`,{name:t.name,options:t.options,storage:this.editor.extensionStorage[t.name],editor:e,type:BQ(t.name,this.schema)});return r?[t.name,(i,a,o)=>{let s=g$(i,n);return r()({mark:i,view:a,inline:o,editor:e,extension:t,HTMLAttributes:s,updateAttributes:t=>{vIe(i,e,t)}})}]:[]}))}destroy(){var e;(e=this.decorationManager)==null||e.destroy(),this.extensions.forEach(e=>{let t=e;for(;t.parent;){let e=t.parent;e.child===t&&(e.child=null),t=e}}),this.extensions=[],this.baseExtensions=[],this.decorationManager=null,this.schema=null,this.editor=null}setupExtensions(){let e=this.extensions;this.editor.extensionStorage=Object.fromEntries(e.map(e=>[e.name,e.storage])),e.forEach(e=>{let t={name:e.name,options:e.options,storage:this.editor.extensionStorage[e.name],editor:this.editor,type:D$(e.name,this.schema)};e.type===`mark`&&((d$(s$(e,`keepOnSplit`,t))??!0)&&this.splittableMarks.push(e.name),(d$(s$(e,`clearable`,t))??!0)||this.nonClearableMarks.push(e.name));let n=s$(e,`onBeforeCreate`,t),r=s$(e,`onCreate`,t),i=s$(e,`onUpdate`,t),a=s$(e,`onSelectionUpdate`,t),o=s$(e,`onTransaction`,t),s=s$(e,`onFocus`,t),c=s$(e,`onBlur`,t),l=s$(e,`onDestroy`,t);n&&this.editor.on(`beforeCreate`,n),r&&this.editor.on(`create`,r),i&&this.editor.on(`update`,i),a&&this.editor.on(`selectionUpdate`,a),o&&this.editor.on(`transaction`,o),s&&this.editor.on(`focus`,s),c&&this.editor.on(`blur`,c),l&&this.editor.on(`destroy`,l)})}};l1.resolve=x$,l1.sort=b$,l1.flatten=c$;var u1=class e extends a1{constructor(...e){super(...e),this.type=`extension`}static create(t={}){return new e(typeof t==`function`?t():t)}configure(e){return super.configure(e)}extend(e){let t=typeof e==`function`?e():e;return super.extend(t)}},TIe=u1.create({name:`clipboardTextSerializer`,addOptions(){return{blockSeparator:void 0}},addProseMirrorPlugins(){return[new dY({key:new mY(`clipboardTextSerializer`),props:{clipboardTextSerializer:()=>{let{editor:e}=this,{state:t,schema:n}=e,{doc:r,selection:i}=t,a=C$(n),{blockSeparator:o}=this.options,s={...o===void 0?{}:{blockSeparator:o},textSerializers:a};return[...i.ranges].sort((e,t)=>e.$from.pos-t.$from.pos).map(({$from:e,$to:t})=>S$(r,{from:e.pos,to:t.pos},s)).join(o??`
+`);c+=e.type===`paragraph`?`\n\n${o}`:`\n${o}`}}),c}function a1(e,t){let n={...e};return e1(e)&&e1(t)&&Object.keys(t).forEach(r=>{e1(t[r])&&e1(e[r])?n[r]=a1(e[r],t[r]):n[r]=t[r]}),n}function yIe(e,t,n={}){let{state:r}=t,{doc:i,tr:a}=r,o=e;i.descendants((t,r)=>{let i=a.mapping.map(r),s=a.mapping.map(r)+t.nodeSize,c=null;if(t.marks.forEach(e=>{if(e!==o)return!1;c=e}),!c)return;let l=!1;if(Object.keys(n).forEach(e=>{n[e]!==c.attrs[e]&&(l=!0)}),l){let t=e.type.create({...e.attrs,...n});a.removeMark(i,s,e.type),a.addMark(i,s,t)}}),a.docChanged&&t.view.dispatch(a)}var o1=class{constructor(e){this.find=e.find,this.handler=e.handler,this.undoable=e.undoable??!0}},bIe=(e,t)=>{if(RQ(t))return t.exec(e);let n=t(e);if(!n)return null;let r=[n.text];return r.index=n.index,r.input=e,r.data=n.data,n.replaceWith&&(n.text.includes(n.replaceWith)||console.warn(`[tiptap warn]: "inputRuleMatch.replaceWith" must be part of "inputRuleMatch.text".`),r.push(n.replaceWith)),r};function s1(e){let{editor:t,from:n,to:r,text:i,rules:a,plugin:o}=e,{view:s}=t;if(s.composing)return!1;let c=s.state.doc.resolve(n);if(c.parent.type.spec.code||(c.nodeBefore||c.nodeAfter)?.marks.find(e=>e.type.spec.code))return!1;let l=!1,u=wFe(c)+i;return a.forEach(e=>{if(l)return;let a=bIe(u,e.find);if(!a)return;let d=a[0].length-i.length;if(d>0){let e=c.parentOffset-d;if(e<0||c.parent.textBetween(e,c.parentOffset)!==a[0].slice(0,d))return}let f=s.state.tr,p=PQ({state:s.state,transaction:f}),m={from:n-(a[0].length-i.length),to:r},{commands:h,chain:g,can:_}=new FQ({editor:t,state:p});e.handler({state:p,range:m,match:a,commands:h,chain:g,can:_})===null||!f.steps.length||(e.undoable&&f.setMeta(o,{transform:f,from:n,to:r,text:i}),s.dispatch(f),l=!0)}),l}function xIe(e){let{editor:t,rules:n}=e,r=new mY({state:{init(){return null},apply(e,i,a){let o=e.getMeta(r);if(o)return o;let s=e.getMeta(`applyInputRules`);return s&&setTimeout(()=>{let{text:e}=s;e=typeof e==`string`?e:f$(lq.from(e),a.schema);let{from:i}=s;s1({editor:t,from:i,to:i+e.length,text:e,rules:n,plugin:r})}),e.selectionSet||e.docChanged?null:i}},props:{handleTextInput(e,i,a,o){return s1({editor:t,from:i,to:a,text:o,rules:n,plugin:r})},handleDOMEvents:{compositionend:e=>(setTimeout(()=>{let{$cursor:i}=e.state.selection;i&&s1({editor:t,from:i.pos,to:i.pos,text:``,rules:n,plugin:r})}),!1)},handleKeyDown(e,i){if(i.key!==`Enter`)return!1;let{$cursor:a}=e.state.selection;return a?s1({editor:t,from:a.pos,to:a.pos,text:`
+`,rules:n,plugin:r}):!1}},isInputRules:!0});return r}var c1=class{constructor(e={}){this.type=`extendable`,this.parent=null,this.child=null,this.name=``,this.config={name:this.name},this.config={...this.config,...e},this.name=this.config.name}get options(){return{...m$(u$(this,`addOptions`,{name:this.name}))}}get storage(){return{...m$(u$(this,`addStorage`,{name:this.name,options:this.options}))}}configure(e={}){let t=this.extend({...this.config,addOptions:()=>a1(this.options,e)});return t.name=this.name,t.parent=this.parent,this.child=null,t}extend(e={}){let t=new this.constructor({...this.config,...e});return t.parent=this,this.child=t,t.name=`name`in e?e.name:t.parent.name,t}},l1=class e extends c1{constructor(...e){super(...e),this.type=`mark`}static create(t={}){return new e(typeof t==`function`?t():t)}static handleExit({editor:e,mark:t}){let{tr:n}=e.state,r=e.state.selection.$from;if(r.pos===r.end()){let i=r.marks();if(!i.find(e=>e?.type.name===t.name))return!1;let a=i.find(e=>e?.type.name===t.name);return a&&n.removeStoredMark(a),n.insertText(` `,r.pos),e.view.dispatch(n),!0}return!1}configure(e){return super.configure(e)}extend(e){let t=typeof e==`function`?e():e;return super.extend(t)}},u1=class{constructor(e){this.find=e.find,this.handler=e.handler}},SIe=(e,t,n)=>{if(RQ(t))return[...e.matchAll(t)];let r=t(e,n);return r?r.map(t=>{let n=[t.text];return n.index=t.index,n.input=e,n.data=t.data,t.replaceWith&&(t.text.includes(t.replaceWith)||console.warn(`[tiptap warn]: "pasteRuleMatch.replaceWith" must be part of "pasteRuleMatch.text".`),n.push(t.replaceWith)),n}):[]};function CIe(e){let{editor:t,state:n,from:r,to:i,rule:a,pasteEvent:o,dropEvent:s}=e,{commands:c,chain:l,can:u}=new FQ({editor:t,state:n}),d=[];return n.doc.nodesBetween(r,i,(e,t)=>{var f;if(!((f=e.type)==null||(f=f.spec)==null)&&f.code||!(e.isText||e.isTextblock||e.isInline))return;let p=e.content?.size??e.nodeSize??0,m=Math.max(r,t),h=Math.min(i,t+p);m>=h||SIe(e.isText?e.text||``:e.textBetween(m-t,h-t,void 0,``),a.find,o).forEach(e=>{if(e.index===void 0)return;let t=m+e.index+1,r=t+e[0].length,i={from:n.tr.mapping.map(t),to:n.tr.mapping.map(r)},f=a.handler({state:n,range:i,match:e,commands:c,chain:l,can:u,pasteEvent:o,dropEvent:s});d.push(f)})}),d.every(e=>e!==null)}var d1=null,wIe=e=>{var t;let n=new ClipboardEvent(`paste`,{clipboardData:new DataTransfer});return(t=n.clipboardData)==null||t.setData(`text/html`,e),n};function TIe(e){let{editor:t,rules:n}=e,r=null,i=!1,a=!1,o=typeof ClipboardEvent<`u`?new ClipboardEvent(`paste`):null,s;try{s=typeof DragEvent<`u`?new DragEvent(`drop`):null}catch{s=null}let c=({state:e,from:n,to:r,rule:i,pasteEvt:a})=>{let c=e.tr;if(!(!CIe({editor:t,state:PQ({state:e,transaction:c}),from:Math.max(n-1,0),to:r.b-1,rule:i,pasteEvent:a,dropEvent:s})||!c.steps.length)){try{s=typeof DragEvent<`u`?new DragEvent(`drop`):null}catch{s=null}return o=typeof ClipboardEvent<`u`?new ClipboardEvent(`paste`):null,c}};return n.map(e=>new mY({view(e){let n=n=>{r=e.dom.parentElement?.contains(n.target)?e.dom.parentElement:null,r&&(d1=t)},i=()=>{d1&&=null};return window.addEventListener(`dragstart`,n),window.addEventListener(`dragend`,i),{destroy(){window.removeEventListener(`dragstart`,n),window.removeEventListener(`dragend`,i)}}},props:{handleDOMEvents:{drop:(e,t)=>{if(a=r===e.dom.parentElement,s=t,!a){let e=d1;e?.isEditable&&setTimeout(()=>{let t=e.state.selection;t&&e.commands.deleteRange({from:t.from,to:t.to})},10)}return!1},paste:(e,t)=>{let n=t.clipboardData?.getData(`text/html`);return o=t,i=!!n?.includes(`data-pm-slice`),!1}}},appendTransaction:(t,n,r)=>{let s=t[0],l=s.getMeta(`uiEvent`)===`paste`&&!i,u=s.getMeta(`uiEvent`)===`drop`&&!a,d=s.getMeta(`applyPasteRules`),f=!!d;if(!l&&!u&&!f)return;if(f){let{text:t}=d;t=typeof t==`string`?t:f$(lq.from(t),r.schema);let{from:n}=d,i=n+t.length,a=wIe(t);return c({rule:e,state:r,from:n,to:{b:i},pasteEvt:a})}let p=n.doc.content.findDiffStart(r.doc.content),m=n.doc.content.findDiffEnd(r.doc.content);if(!(!_Ie(p)||!m||p===m.b))return c({rule:e,state:r,from:p,to:m,pasteEvt:o})}}))}var f1=class{constructor(e,t){this.splittableMarks=[],this.nonClearableMarks=[],this.decorationManager=null,this.editor=t,this.baseExtensions=e,this.extensions=w$(e),this.schema=gFe(this.extensions,t),this.setupExtensions()}get commands(){return this.extensions.reduce((e,t)=>{let n=u$(t,`addCommands`,{name:t.name,options:t.options,storage:this.editor.extensionStorage[t.name],editor:this.editor,type:A$(t.name,this.schema)});return n?{...e,...n()}:e},{})}get plugins(){let{editor:e}=this,t=C$([...this.extensions].reverse()).flatMap(t=>{let n={name:t.name,options:t.options,storage:this.editor.extensionStorage[t.name],editor:e,type:A$(t.name,this.schema)},r=[],i=u$(t,`addKeyboardShortcuts`,n),a={};if(t.type===`mark`&&u$(t,`exitable`,n)&&(a.ArrowRight=()=>l1.handleExit({editor:e,mark:t})),i){let t=Object.fromEntries(Object.entries(i()).map(([t,n])=>[t,()=>n({editor:e})]));a={...a,...t}}let o=yPe(a);r.push(o);let s=u$(t,`addInputRules`,n);if(N$(t,e.options.enableInputRules)&&s){let t=s();if(t&&t.length){let n=xIe({editor:e,rules:t}),i=Array.isArray(n)?n:[n];r.push(...i)}}let c=u$(t,`addPasteRules`,n);if(N$(t,e.options.enablePasteRules)&&c){let t=c();if(t&&t.length){let n=TIe({editor:e,rules:t});r.push(...n)}}let l=u$(t,`addProseMirrorPlugins`,n);if(l){let e=l();r.push(...e)}return r}),n=this.createDecorationPlugin();return n&&t.push(n),t}createDecorationPlugin(){var e;let{editor:t}=this;(e=this.decorationManager)==null||e.destroy();let n=[];return this.extensions.forEach(e=>{let r=u$(e,`addDecorations`,{name:e.name,options:e.options,storage:this.editor.extensionStorage[e.name],editor:t,type:A$(e.name,this.schema)});r&&n.push({name:e.name,addDecorations:r})}),this.decorationManager=new mIe({editor:t,entries:n}),this.decorationManager.plugin}get attributes(){return g$(this.extensions)}get nodeViews(){let{editor:e}=this,{nodeExtensions:t}=h$(this.extensions);return Object.fromEntries(t.filter(e=>!!u$(e,`addNodeView`)).map(t=>{let n=this.attributes.filter(e=>e.type===t.name),r=u$(t,`addNodeView`,{name:t.name,options:t.options,storage:this.editor.extensionStorage[t.name],editor:e,type:IQ(t.name,this.schema)});if(!r)return[];let i=r();return i?[t.name,(r,a,o,s,c)=>i({node:r,view:a,getPos:o,decorations:s,innerDecorations:c,editor:e,extension:t,HTMLAttributes:y$(r,n)})]:[]}))}dispatchTransaction(e){let{editor:t}=this;return C$([...this.extensions].reverse()).reduceRight((e,n)=>{let r={name:n.name,options:n.options,storage:this.editor.extensionStorage[n.name],editor:t,type:A$(n.name,this.schema)},i=u$(n,`dispatchTransaction`,r);return i?t=>{i.call(r,{transaction:t,next:e})}:e},e)}transformPastedHTML(e){let{editor:t}=this;return C$([...this.extensions]).reduce((e,n)=>{let r={name:n.name,options:n.options,storage:this.editor.extensionStorage[n.name],editor:t,type:A$(n.name,this.schema)},i=u$(n,`transformPastedHTML`,r);return i?(t,n)=>{let a=e(t,n);return i.call(r,a)}:e},e||(e=>e))}get markViews(){let{editor:e}=this,{markExtensions:t}=h$(this.extensions);return Object.fromEntries(t.filter(e=>!!u$(e,`addMarkView`)).map(t=>{let n=this.attributes.filter(e=>e.type===t.name),r=u$(t,`addMarkView`,{name:t.name,options:t.options,storage:this.editor.extensionStorage[t.name],editor:e,type:UQ(t.name,this.schema)});return r?[t.name,(i,a,o)=>{let s=y$(i,n);return r()({mark:i,view:a,inline:o,editor:e,extension:t,HTMLAttributes:s,updateAttributes:t=>{yIe(i,e,t)}})}]:[]}))}destroy(){var e;(e=this.decorationManager)==null||e.destroy(),this.extensions.forEach(e=>{let t=e;for(;t.parent;){let e=t.parent;e.child===t&&(e.child=null),t=e}}),this.extensions=[],this.baseExtensions=[],this.decorationManager=null,this.schema=null,this.editor=null}setupExtensions(){let e=this.extensions;this.editor.extensionStorage=Object.fromEntries(e.map(e=>[e.name,e.storage])),e.forEach(e=>{let t={name:e.name,options:e.options,storage:this.editor.extensionStorage[e.name],editor:this.editor,type:A$(e.name,this.schema)};e.type===`mark`&&((m$(u$(e,`keepOnSplit`,t))??!0)&&this.splittableMarks.push(e.name),(m$(u$(e,`clearable`,t))??!0)||this.nonClearableMarks.push(e.name));let n=u$(e,`onBeforeCreate`,t),r=u$(e,`onCreate`,t),i=u$(e,`onUpdate`,t),a=u$(e,`onSelectionUpdate`,t),o=u$(e,`onTransaction`,t),s=u$(e,`onFocus`,t),c=u$(e,`onBlur`,t),l=u$(e,`onDestroy`,t);n&&this.editor.on(`beforeCreate`,n),r&&this.editor.on(`create`,r),i&&this.editor.on(`update`,i),a&&this.editor.on(`selectionUpdate`,a),o&&this.editor.on(`transaction`,o),s&&this.editor.on(`focus`,s),c&&this.editor.on(`blur`,c),l&&this.editor.on(`destroy`,l)})}};f1.resolve=w$,f1.sort=C$,f1.flatten=d$;var p1=class e extends c1{constructor(...e){super(...e),this.type=`extension`}static create(t={}){return new e(typeof t==`function`?t():t)}configure(e){return super.configure(e)}extend(e){let t=typeof e==`function`?e():e;return super.extend(t)}},EIe=p1.create({name:`clipboardTextSerializer`,addOptions(){return{blockSeparator:void 0}},addProseMirrorPlugins(){return[new mY({key:new _Y(`clipboardTextSerializer`),props:{clipboardTextSerializer:()=>{let{editor:e}=this,{state:t,schema:n}=e,{doc:r,selection:i}=t,a=E$(n),{blockSeparator:o}=this.options,s={...o===void 0?{}:{blockSeparator:o},textSerializers:a};return[...i.ranges].sort((e,t)=>e.$from.pos-t.$from.pos).map(({$from:e,$to:t})=>T$(r,{from:e.pos,to:t.pos},s)).join(o??`
 
-`)}}})]}}),EIe=u1.create({name:`commands`,addCommands(){return{...QFe}}}),DIe=u1.create({name:`delete`,onUpdate({transaction:e,appendedTransactions:t}){var n;let r=()=>{var n,r;if(((n=this.editor.options.coreExtensionOptions)==null||(n=n.delete)==null||(r=n.filterTransaction)==null?void 0:r.call(n,e))??e.getMeta(`y-sync$`))return;let i=a$(e.before,[e,...t]);T$(i).forEach(t=>{i.mapping.mapResult(t.oldRange.from).deletedAfter&&i.mapping.mapResult(t.oldRange.to).deletedBefore&&i.before.nodesBetween(t.oldRange.from,t.oldRange.to,(n,r)=>{let a=r+n.nodeSize-2,o=t.oldRange.from<=r&&a<=t.oldRange.to;this.editor.emit(`delete`,{type:`node`,node:n,from:r,to:a,newFrom:i.mapping.map(r),newTo:i.mapping.map(a),deletedRange:t.oldRange,newRange:t.newRange,partial:!o,editor:this.editor,transaction:e,combinedTransform:i})})});let a=i.mapping;i.steps.forEach((t,n)=>{if(t instanceof gJ){let r=a.slice(n).map(t.from,-1),o=a.slice(n).map(t.to),s=a.invert().map(r,-1),c=a.invert().map(o),l=r>0?i.doc.nodeAt(r-1)?.marks.some(e=>e.eq(t.mark)):!1,u=i.doc.nodeAt(o)?.marks.some(e=>e.eq(t.mark));this.editor.emit(`delete`,{type:`mark`,mark:t.mark,from:t.from,to:t.to,deletedRange:{from:s,to:c},newRange:{from:r,to:o},partial:!!(u||l),editor:this.editor,transaction:e,combinedTransform:i})}})};((n=this.editor.options.coreExtensionOptions)==null||(n=n.delete)==null?void 0:n.async)??!0?setTimeout(r,0):r()}}),OIe=u1.create({name:`drop`,addProseMirrorPlugins(){return[new dY({key:new mY(`tiptapDrop`),props:{handleDrop:(e,t,n,r)=>{this.editor.emit(`drop`,{editor:this.editor,event:t,slice:n,moved:r})}}})]}}),kIe=u1.create({name:`editable`,addProseMirrorPlugins(){return[new dY({key:new mY(`editable`),props:{editable:()=>this.editor.options.editable}})]}}),AIe=new mY(`focusEvents`),jIe=u1.create({name:`focusEvents`,addProseMirrorPlugins(){let{editor:e}=this;return[new dY({key:AIe,props:{handleDOMEvents:{focus:(t,n)=>{e.isFocused=!0;let r=e.state.tr.setMeta(`focus`,{event:n}).setMeta(`addToHistory`,!1);return t.dispatch(r),!1},blur:(t,n)=>{e.isFocused=!1;let r=e.state.tr.setMeta(`blur`,{event:n}).setMeta(`addToHistory`,!1);return t.dispatch(r),!1}}}})]}}),MIe=u1.create({name:`keymap`,addKeyboardShortcuts(){let e=()=>this.editor.commands.first(({commands:e})=>[()=>e.undoInputRule(),()=>e.command(({tr:t})=>{let{selection:n,doc:r}=t,{empty:i,$anchor:a}=n,{pos:o,parent:s}=a,c=a.parent.isTextblock&&o>0?t.doc.resolve(o-1):a,l=c.parent.type.spec.isolating,u=a.pos-a.parentOffset,d=l&&c.parent.childCount===1?u===a.pos:JJ.atStart(r).from===o;return!i||!s.type.isTextblock||s.textContent.length||!d||d&&a.parent.type.name===`paragraph`?!1:e.clearNodes()}),()=>e.deleteSelection(),()=>e.joinBackward(),()=>e.selectNodeBackward()]),t=()=>this.editor.commands.first(({commands:e})=>[()=>e.deleteSelection(),()=>e.deleteCurrentNode(),()=>e.joinForward(),()=>e.selectNodeForward()]),n={Enter:()=>this.editor.commands.first(({commands:e})=>[()=>e.newlineInCode(),()=>e.createParagraphNear(),()=>e.liftEmptyBlock(),()=>e.splitBlock()]),"Mod-Enter":()=>this.editor.commands.exitCode(),Backspace:e,"Mod-Backspace":e,"Shift-Backspace":e,Delete:t,"Mod-Delete":t,"Mod-a":()=>this.editor.commands.selectAll()},r={...n},i={...n,"Ctrl-h":e,"Alt-Backspace":e,"Ctrl-d":t,"Ctrl-Alt-Backspace":t,"Alt-Delete":t,"Alt-d":t,"Ctrl-a":()=>this.editor.commands.selectTextblockStart(),"Ctrl-e":()=>this.editor.commands.selectTextblockEnd()};return GQ()||$Q()?i:r},addProseMirrorPlugins(){return[new dY({key:new mY(`clearDocument`),appendTransaction:(e,t,n)=>{if(e.some(e=>e.getMeta(`composition`)))return;let r=e.some(e=>e.docChanged)&&!t.doc.eq(n.doc),i=e.some(e=>e.getMeta(`preventClearDocument`));if(!r||i)return;let{empty:a,from:o,to:s}=t.selection,c=JJ.atStart(t.doc).from,l=JJ.atEnd(t.doc).to;if(a||!(o===c&&s===l)||!M$(n.doc))return;let u=n.tr,d=jQ({state:n,transaction:u}),{commands:f}=new MQ({editor:this.editor,state:d});if(f.clearNodes(),u.steps.length)return u}})]}}),NIe=u1.create({name:`paste`,addProseMirrorPlugins(){return[new dY({key:new mY(`tiptapPaste`),props:{handlePaste:(e,t,n)=>{this.editor.emit(`paste`,{editor:this.editor,event:t,slice:n})}}})]}}),PIe=u1.create({name:`tabindex`,addOptions(){return{value:void 0}},addProseMirrorPlugins(){return[new dY({key:new mY(`tabindex`),props:{attributes:()=>!this.editor.isEditable&&this.options.value===void 0?{}:{tabindex:this.options.value??`0`}}})]}}),FIe=u1.create({name:`textDirection`,addOptions(){return{direction:void 0}},addGlobalAttributes(){if(!this.options.direction)return[];let{nodeExtensions:e}=f$(this.extensions);return[{types:e.filter(e=>e.name!==`text`).map(e=>e.name),attributes:{dir:{default:this.options.direction,parseHTML:e=>{let t=e.getAttribute(`dir`);return t&&(t===`ltr`||t===`rtl`||t===`auto`)?t:this.options.direction},renderHTML:e=>e.dir?{dir:e.dir}:{}}}}]},addProseMirrorPlugins(){return[new dY({key:new mY(`textDirection`),props:{attributes:()=>{let e=this.options.direction;return e?{dir:e}:{}}}})]}}),d1=!1;function IIe(e){if(d1)return;d1=!0;let t;try{t=yJ.fromJSON(e,{from:0,to:0}).slice.content}catch{return}t instanceof oq||console.warn(`[tiptap warn]: prosemirror-model is loaded more than once. Wrapping and splitting nodes will fail. Deduplicate it in your lock file, or alias it to a single copy in your bundler.`)}var LIe=class e{get name(){return this.node.type.name}constructor(e,t,n=!1,r=null){this.currentNode=null,this.actualDepth=null,this.isBlock=n,this.resolvedPos=e,this.editor=t,this.currentNode=r}get node(){return this.currentNode||this.resolvedPos.node()}get element(){return this.editor.view.domAtPos(this.pos).node}get depth(){return this.actualDepth??this.resolvedPos.depth}get pos(){return this.resolvedPos.pos}get content(){return this.node.content}set content(e){let t=this.from,n=this.to;if(this.isBlock){if(this.content.size===0){console.error(`You can’t set content on a block node. Tried to set content on ${this.name} at ${this.pos}`);return}t=this.from+1,n=this.to-1}this.editor.commands.insertContentAt({from:t,to:n},e)}get attributes(){return this.node.attrs}get textContent(){return this.node.textContent}get size(){return this.node.nodeSize}get from(){return this.isBlock?this.pos:this.resolvedPos.start(this.resolvedPos.depth)}get range(){return{from:this.from,to:this.to}}get to(){return this.isBlock?this.pos+this.size:this.resolvedPos.end(this.resolvedPos.depth)+ +!this.node.isText}get parent(){if(this.depth===0)return null;let t=this.resolvedPos.start(this.resolvedPos.depth-1);return new e(this.resolvedPos.doc.resolve(t),this.editor)}get before(){let t=this.resolvedPos.doc.resolve(this.from-(this.isBlock?1:2));return t.depth!==this.depth&&(t=this.resolvedPos.doc.resolve(this.from-3)),new e(t,this.editor)}get after(){let t=this.resolvedPos.doc.resolve(this.to+(this.isBlock?2:1));return t.depth!==this.depth&&(t=this.resolvedPos.doc.resolve(this.to+3)),new e(t,this.editor)}get children(){let t=[];return this.node.content.forEach((n,r)=>{let i=n.isBlock&&!n.isTextblock,a=n.isAtom&&!n.isText,o=n.isInline,s=this.pos+r+ +!a;if(s<0||s>this.resolvedPos.doc.nodeSize-2)return;let c=this.resolvedPos.doc.resolve(s);if(!i&&!o&&c.depth<=this.depth)return;let l=new e(c,this.editor,i,i||o?n:null);i&&(l.actualDepth=this.depth+1),t.push(l)}),t}get firstChild(){return this.children[0]||null}get lastChild(){let e=this.children;return e[e.length-1]||null}closest(e,t={}){let n=null,r=this.parent;for(;r&&!n;){if(r.node.type.name===e)if(Object.keys(t).length>0){let e=r.node.attrs,n=Object.keys(t);for(let r=0;r<n.length;r+=1){let i=n[r];if(e[i]!==t[i])break}}else n=r;r=r.parent}return n}querySelector(e,t={}){return this.querySelectorAll(e,t,!0)[0]||null}querySelectorAll(e,t={},n=!1){let r=[];if(!this.children||this.children.length===0)return r;let i=Object.keys(t);return this.children.forEach(a=>{n&&r.length>0||(a.node.type.name===e&&i.every(e=>t[e]===a.node.attrs[e])&&r.push(a),!(n&&r.length>0)&&(r=r.concat(a.querySelectorAll(e,t,n))))}),r}setAttribute(e){let{tr:t}=this.editor.state;t.setNodeMarkup(this.from,void 0,{...this.node.attrs,...e}),this.editor.view.dispatch(t)}},RIe=`.ProseMirror {
+`)}}})]}}),DIe=p1.create({name:`commands`,addCommands(){return{...$Fe}}}),OIe=p1.create({name:`delete`,onUpdate({transaction:e,appendedTransactions:t}){var n;let r=()=>{var n,r;if(((n=this.editor.options.coreExtensionOptions)==null||(n=n.delete)==null||(r=n.filterTransaction)==null?void 0:r.call(n,e))??e.getMeta(`y-sync$`))return;let i=c$(e.before,[e,...t]);O$(i).forEach(t=>{i.mapping.mapResult(t.oldRange.from).deletedAfter&&i.mapping.mapResult(t.oldRange.to).deletedBefore&&i.before.nodesBetween(t.oldRange.from,t.oldRange.to,(n,r)=>{let a=r+n.nodeSize-2,o=t.oldRange.from<=r&&a<=t.oldRange.to;this.editor.emit(`delete`,{type:`node`,node:n,from:r,to:a,newFrom:i.mapping.map(r),newTo:i.mapping.map(a),deletedRange:t.oldRange,newRange:t.newRange,partial:!o,editor:this.editor,transaction:e,combinedTransform:i})})});let a=i.mapping;i.steps.forEach((t,n)=>{if(t instanceof yJ){let r=a.slice(n).map(t.from,-1),o=a.slice(n).map(t.to),s=a.invert().map(r,-1),c=a.invert().map(o),l=r>0?i.doc.nodeAt(r-1)?.marks.some(e=>e.eq(t.mark)):!1,u=i.doc.nodeAt(o)?.marks.some(e=>e.eq(t.mark));this.editor.emit(`delete`,{type:`mark`,mark:t.mark,from:t.from,to:t.to,deletedRange:{from:s,to:c},newRange:{from:r,to:o},partial:!!(u||l),editor:this.editor,transaction:e,combinedTransform:i})}})};((n=this.editor.options.coreExtensionOptions)==null||(n=n.delete)==null?void 0:n.async)??!0?setTimeout(r,0):r()}}),kIe=p1.create({name:`drop`,addProseMirrorPlugins(){return[new mY({key:new _Y(`tiptapDrop`),props:{handleDrop:(e,t,n,r)=>{this.editor.emit(`drop`,{editor:this.editor,event:t,slice:n,moved:r})}}})]}}),AIe=p1.create({name:`editable`,addProseMirrorPlugins(){return[new mY({key:new _Y(`editable`),props:{editable:()=>this.editor.options.editable}})]}}),jIe=new _Y(`focusEvents`),MIe=p1.create({name:`focusEvents`,addProseMirrorPlugins(){let{editor:e}=this;return[new mY({key:jIe,props:{handleDOMEvents:{focus:(t,n)=>{e.isFocused=!0;let r=e.state.tr.setMeta(`focus`,{event:n}).setMeta(`addToHistory`,!1);return t.dispatch(r),!1},blur:(t,n)=>{e.isFocused=!1;let r=e.state.tr.setMeta(`blur`,{event:n}).setMeta(`addToHistory`,!1);return t.dispatch(r),!1}}}})]}}),NIe=p1.create({name:`keymap`,addKeyboardShortcuts(){let e=()=>this.editor.commands.first(({commands:e})=>[()=>e.undoInputRule(),()=>e.command(({tr:t})=>{let{selection:n,doc:r}=t,{empty:i,$anchor:a}=n,{pos:o,parent:s}=a,c=a.parent.isTextblock&&o>0?t.doc.resolve(o-1):a,l=c.parent.type.spec.isolating,u=a.pos-a.parentOffset,d=l&&c.parent.childCount===1?u===a.pos:ZJ.atStart(r).from===o;return!i||!s.type.isTextblock||s.textContent.length||!d||d&&a.parent.type.name===`paragraph`?!1:e.clearNodes()}),()=>e.deleteSelection(),()=>e.joinBackward(),()=>e.selectNodeBackward()]),t=()=>this.editor.commands.first(({commands:e})=>[()=>e.deleteSelection(),()=>e.deleteCurrentNode(),()=>e.joinForward(),()=>e.selectNodeForward()]),n={Enter:()=>this.editor.commands.first(({commands:e})=>[()=>e.newlineInCode(),()=>e.createParagraphNear(),()=>e.liftEmptyBlock(),()=>e.splitBlock()]),"Mod-Enter":()=>this.editor.commands.exitCode(),Backspace:e,"Mod-Backspace":e,"Shift-Backspace":e,Delete:t,"Mod-Delete":t,"Mod-a":()=>this.editor.commands.selectAll()},r={...n},i={...n,"Ctrl-h":e,"Alt-Backspace":e,"Ctrl-d":t,"Ctrl-Alt-Backspace":t,"Alt-Delete":t,"Alt-d":t,"Ctrl-a":()=>this.editor.commands.selectTextblockStart(),"Ctrl-e":()=>this.editor.commands.selectTextblockEnd()};return JQ()||n$()?i:r},addProseMirrorPlugins(){return[new mY({key:new _Y(`clearDocument`),appendTransaction:(e,t,n)=>{if(e.some(e=>e.getMeta(`composition`)))return;let r=e.some(e=>e.docChanged)&&!t.doc.eq(n.doc),i=e.some(e=>e.getMeta(`preventClearDocument`));if(!r||i)return;let{empty:a,from:o,to:s}=t.selection,c=ZJ.atStart(t.doc).from,l=ZJ.atEnd(t.doc).to;if(a||!(o===c&&s===l)||!F$(n.doc))return;let u=n.tr,d=PQ({state:n,transaction:u}),{commands:f}=new FQ({editor:this.editor,state:d});if(f.clearNodes(),u.steps.length)return u}})]}}),PIe=p1.create({name:`paste`,addProseMirrorPlugins(){return[new mY({key:new _Y(`tiptapPaste`),props:{handlePaste:(e,t,n)=>{this.editor.emit(`paste`,{editor:this.editor,event:t,slice:n})}}})]}}),FIe=p1.create({name:`tabindex`,addOptions(){return{value:void 0}},addProseMirrorPlugins(){return[new mY({key:new _Y(`tabindex`),props:{attributes:()=>!this.editor.isEditable&&this.options.value===void 0?{}:{tabindex:this.options.value??`0`}}})]}}),IIe=p1.create({name:`textDirection`,addOptions(){return{direction:void 0}},addGlobalAttributes(){if(!this.options.direction)return[];let{nodeExtensions:e}=h$(this.extensions);return[{types:e.filter(e=>e.name!==`text`).map(e=>e.name),attributes:{dir:{default:this.options.direction,parseHTML:e=>{let t=e.getAttribute(`dir`);return t&&(t===`ltr`||t===`rtl`||t===`auto`)?t:this.options.direction},renderHTML:e=>e.dir?{dir:e.dir}:{}}}}]},addProseMirrorPlugins(){return[new mY({key:new _Y(`textDirection`),props:{attributes:()=>{let e=this.options.direction;return e?{dir:e}:{}}}})]}}),m1=!1;function LIe(e){if(m1)return;m1=!0;let t;try{t=SJ.fromJSON(e,{from:0,to:0}).slice.content}catch{return}t instanceof lq||console.warn(`[tiptap warn]: prosemirror-model is loaded more than once. Wrapping and splitting nodes will fail. Deduplicate it in your lock file, or alias it to a single copy in your bundler.`)}var RIe=class e{get name(){return this.node.type.name}constructor(e,t,n=!1,r=null){this.currentNode=null,this.actualDepth=null,this.isBlock=n,this.resolvedPos=e,this.editor=t,this.currentNode=r}get node(){return this.currentNode||this.resolvedPos.node()}get element(){return this.editor.view.domAtPos(this.pos).node}get depth(){return this.actualDepth??this.resolvedPos.depth}get pos(){return this.resolvedPos.pos}get content(){return this.node.content}set content(e){let t=this.from,n=this.to;if(this.isBlock){if(this.content.size===0){console.error(`You can’t set content on a block node. Tried to set content on ${this.name} at ${this.pos}`);return}t=this.from+1,n=this.to-1}this.editor.commands.insertContentAt({from:t,to:n},e)}get attributes(){return this.node.attrs}get textContent(){return this.node.textContent}get size(){return this.node.nodeSize}get from(){return this.isBlock?this.pos:this.resolvedPos.start(this.resolvedPos.depth)}get range(){return{from:this.from,to:this.to}}get to(){return this.isBlock?this.pos+this.size:this.resolvedPos.end(this.resolvedPos.depth)+ +!this.node.isText}get parent(){if(this.depth===0)return null;let t=this.resolvedPos.start(this.resolvedPos.depth-1);return new e(this.resolvedPos.doc.resolve(t),this.editor)}get before(){let t=this.resolvedPos.doc.resolve(this.from-(this.isBlock?1:2));return t.depth!==this.depth&&(t=this.resolvedPos.doc.resolve(this.from-3)),new e(t,this.editor)}get after(){let t=this.resolvedPos.doc.resolve(this.to+(this.isBlock?2:1));return t.depth!==this.depth&&(t=this.resolvedPos.doc.resolve(this.to+3)),new e(t,this.editor)}get children(){let t=[];return this.node.content.forEach((n,r)=>{let i=n.isBlock&&!n.isTextblock,a=n.isAtom&&!n.isText,o=n.isInline,s=this.pos+r+ +!a;if(s<0||s>this.resolvedPos.doc.nodeSize-2)return;let c=this.resolvedPos.doc.resolve(s);if(!i&&!o&&c.depth<=this.depth)return;let l=new e(c,this.editor,i,i||o?n:null);i&&(l.actualDepth=this.depth+1),t.push(l)}),t}get firstChild(){return this.children[0]||null}get lastChild(){let e=this.children;return e[e.length-1]||null}closest(e,t={}){let n=null,r=this.parent;for(;r&&!n;){if(r.node.type.name===e)if(Object.keys(t).length>0){let e=r.node.attrs,n=Object.keys(t);for(let r=0;r<n.length;r+=1){let i=n[r];if(e[i]!==t[i])break}}else n=r;r=r.parent}return n}querySelector(e,t={}){return this.querySelectorAll(e,t,!0)[0]||null}querySelectorAll(e,t={},n=!1){let r=[];if(!this.children||this.children.length===0)return r;let i=Object.keys(t);return this.children.forEach(a=>{n&&r.length>0||(a.node.type.name===e&&i.every(e=>t[e]===a.node.attrs[e])&&r.push(a),!(n&&r.length>0)&&(r=r.concat(a.querySelectorAll(e,t,n))))}),r}setAttribute(e){let{tr:t}=this.editor.state;t.setNodeMarkup(this.from,void 0,{...this.node.attrs,...e}),this.editor.view.dispatch(t)}},zIe=`.ProseMirror {
   position: relative;
 }
 
@@ -4303,59 +4303,59 @@ img.ProseMirror-separator {
 
 .ProseMirror-focused .ProseMirror-gapcursor {
   display: block;
-}`,zIe=class extends tIe{constructor(e={}){super(),this.css=null,this.className=`tiptap`,this.editorView=null,this.isFocused=!1,this.destroyed=!1,this.isInitialized=!1,this.extensionStorage={},this.instanceId=Math.random().toString(36).slice(2,9),this.hasWarnedStaleDecorationRead=!1,this.options={element:typeof document<`u`?document.createElement(`div`):null,content:``,injectCSS:!0,injectNonce:void 0,extensions:[],autofocus:!1,editable:!0,textDirection:void 0,editorProps:{},parseOptions:{},coreExtensionOptions:{},enableInputRules:!0,enablePasteRules:!0,enableCoreExtensions:!0,enableContentCheck:!1,emitContentError:!1,onBeforeCreate:()=>null,onCreate:()=>null,onMount:()=>null,onUnmount:()=>null,onUpdate:()=>null,onSelectionUpdate:()=>null,onTransaction:()=>null,onFocus:()=>null,onBlur:()=>null,onDestroy:()=>null,onContentError:({error:e})=>{throw e},onPaste:()=>null,onDrop:()=>null,onDelete:()=>null,enableExtensionDispatchTransaction:!0},this.isCapturingTransaction=!1,this.capturedTransaction=null,this.utils={getUpdatedPosition:DFe,createMappablePosition:OFe},this.setOptions(e),this.createExtensionManager(),this.createCommandManager(),this.createSchema(),this.on(`beforeCreate`,this.options.onBeforeCreate),this.emit(`beforeCreate`,{editor:this}),this.on(`mount`,this.options.onMount),this.on(`unmount`,this.options.onUnmount),this.on(`contentError`,this.options.onContentError),this.on(`create`,this.options.onCreate),this.on(`update`,this.options.onUpdate),this.on(`selectionUpdate`,this.options.onSelectionUpdate),this.on(`transaction`,this.options.onTransaction),this.on(`focus`,this.options.onFocus),this.on(`blur`,this.options.onBlur),this.on(`destroy`,this.options.onDestroy),this.on(`drop`,({event:e,slice:t,moved:n})=>this.options.onDrop(e,t,n)),this.on(`paste`,({event:e,slice:t})=>this.options.onPaste(e,t)),this.on(`delete`,this.options.onDelete);let t=this.createDoc();if(!this.editorState){let e=UQ(t,this.options.autofocus);this.editorState=lY.create({doc:t,schema:this.schema,selection:e||void 0})}IIe(this.schema),this.options.element&&this.mount(this.options.element)}mount(e){if(typeof document>`u`)throw Error(`[tiptap error]: The editor cannot be mounted because there is no 'document' defined in this environment.`);this.createView(e),this.emit(`mount`,{editor:this}),this.css&&!document.head.contains(this.css)&&document.head.appendChild(this.css),window.setTimeout(()=>{this.isDestroyed||(this.options.autofocus!==!1&&this.options.autofocus!==null&&this.commands.focus(this.options.autofocus),this.emit(`create`,{editor:this}),this.isInitialized=!0)},0)}unmount(){if(this.editorView){this.editorState=this.editorView.state;let e=this.editorView.dom;e?.editor&&delete e.editor,this.editorView.destroy()}if(this.editorView=null,this.isInitialized=!1,this.css&&!document.querySelectorAll(`.${this.className}`).length)try{typeof this.css.remove==`function`?this.css.remove():this.css.parentNode&&this.css.parentNode.removeChild(this.css)}catch(e){console.warn(`Failed to remove CSS element:`,e)}this.css=null,this.emit(`unmount`,{editor:this})}get storage(){return this.extensionStorage}get commands(){return this.commandManager.commands}chain(){return this.commandManager?this.commandManager.chain():MQ.createFakeChain()}can(){return this.commandManager?this.commandManager.can():MQ.createFallbackCan()}injectCSS(){this.options.injectCSS&&typeof document<`u`&&(this.css=hIe(RIe,this.options.injectNonce))}setOptions(e={}){this.options={...this.options,...e},!(!this.editorView||!this.state||this.isDestroyed)&&(this.options.editorProps&&this.view.setProps(this.options.editorProps),this.view.updateState(this.state))}setEditable(e,t=!0){this.setOptions({editable:e}),t&&this.emit(`update`,{editor:this,transaction:this.state.tr,appendedTransactions:[]})}get isEditable(){return this.options.editable&&this.view&&this.view.editable}get view(){return this.editorView?this.editorView:new Proxy({state:this.editorState,updateState:e=>{this.editorState=e},dispatch:e=>{this.dispatchTransaction(e)},composing:!1,dragging:null,editable:!0,isDestroyed:!1},{get:(e,t)=>{if(this.editorView)return this.editorView[t];if(t===`state`)return this.editorState;if(t in e)return Reflect.get(e,t);throw Error(`[tiptap error]: The editor view is not available. Cannot access view['${t}']. The editor may not be mounted yet.`)}})}get state(){return H$&&!this.hasWarnedStaleDecorationRead&&eIe(this)&&(this.hasWarnedStaleDecorationRead=!0,console.warn("[tiptap warn]: `editor.state` was read while decoration `create()` was running. It returns the pre-transaction document. Use the `state` argument passed to `create()` instead. Helpers like `editor.isActive()` read `editor.state` too, so pass `state` to their standalone versions instead of calling them on the editor.")),this.editorView&&(this.editorState=this.view.state),this.editorState}registerPlugin(e,t){let n=u$(t)?t(e,[...this.state.plugins]):[...this.state.plugins,e],r=this.state.reconfigure({plugins:n});return this.view.updateState(r),r}unregisterPlugin(e){if(this.isDestroyed)return;let t=this.state.plugins,n=t;if([].concat(e).forEach(e=>{let t=typeof e==`string`?`${e}$`:e.key;n=n.filter(e=>!e.key.startsWith(t))}),t.length===n.length)return;let r=this.state.reconfigure({plugins:n});return this.view.updateState(r),r}createExtensionManager(){var e,t;let n=[...this.options.enableCoreExtensions?[kIe,TIe.configure({blockSeparator:(e=this.options.coreExtensionOptions)==null||(e=e.clipboardTextSerializer)==null?void 0:e.blockSeparator}),EIe,jIe,MIe,PIe.configure({value:(t=this.options.coreExtensionOptions)==null||(t=t.tabindex)==null?void 0:t.value}),OIe,NIe,DIe,FIe.configure({direction:this.options.textDirection})].filter(e=>typeof this.options.enableCoreExtensions==`object`?this.options.enableCoreExtensions[e.name]!==!1:!0):[],...this.options.extensions].filter(e=>[`extension`,`node`,`mark`].includes(e?.type));this.extensionManager=new l1(n,this)}createCommandManager(){this.commandManager=new MQ({editor:this})}createSchema(){this.schema=this.extensionManager.schema}createDoc(){let e;try{e=r$(this.options.content,this.schema,this.options.parseOptions,{errorOnInvalidContent:this.options.enableContentCheck})}catch(e){if(!(e instanceof Error)||![`[tiptap error]: Invalid JSON content`,`[tiptap error]: Invalid HTML content`].includes(e.message))throw e;let t=r$(this.options.content,this.schema,this.options.parseOptions,{errorOnInvalidContent:!1});return this.editorState=lY.create({doc:t,schema:this.schema,selection:UQ(t,this.options.autofocus)||void 0}),this.emit(`contentError`,{editor:this,error:e,disableCollaboration:()=>{`collaboration`in this.storage&&typeof this.storage.collaboration==`object`&&this.storage.collaboration&&(this.storage.collaboration.isDisabled=!0),this.options.extensions=this.options.extensions.filter(e=>e.name!==`collaboration`),this.createExtensionManager()}}),this.editorState.doc}return e}createView(e){let{editorProps:t,enableExtensionDispatchTransaction:n}=this.options,r=t.dispatchTransaction||this.dispatchTransaction.bind(this),i=n?this.extensionManager.dispatchTransaction(r):r,a=t.transformPastedHTML,o=this.extensionManager.transformPastedHTML(a);this.editorView=new yQ(e,{...t,attributes:{role:`textbox`,...t?.attributes},dispatchTransaction:i,transformPastedHTML:o,state:this.editorState,markViews:this.extensionManager.markViews,nodeViews:this.extensionManager.nodeViews});let s=this.state.reconfigure({plugins:this.extensionManager.plugins});this.view.updateState(s),this.prependClass(),this.injectCSS();let c=this.view.dom;c.editor=this}createNodeViews(){this.view.isDestroyed||this.view.setProps({markViews:this.extensionManager.markViews,nodeViews:this.extensionManager.nodeViews})}prependClass(){this.view.dom.className=`${this.className} ${this.view.dom.className}`}captureTransaction(e){this.isCapturingTransaction=!0,e(),this.isCapturingTransaction=!1;let t=this.capturedTransaction;return this.capturedTransaction=null,t}dispatchTransaction(e){if(this.view.isDestroyed)return;if(this.isCapturingTransaction){if(!this.capturedTransaction){this.capturedTransaction=e;return}e.steps.forEach(e=>this.capturedTransaction?.step(e));return}let{state:t,transactions:n}=this.state.applyTransaction(e),r=!this.state.selection.eq(t.selection),i=n.includes(e),a=this.state;if(this.emit(`beforeTransaction`,{editor:this,transaction:e,nextState:t}),!i)return;this.view.updateState(t),this.emit(`transaction`,{editor:this,transaction:e,appendedTransactions:n.slice(1)}),r&&this.emit(`selectionUpdate`,{editor:this,transaction:e});let o=n.findLast(e=>e.getMeta(`focus`)||e.getMeta(`blur`)),s=o?.getMeta(`focus`),c=o?.getMeta(`blur`);s&&this.emit(`focus`,{editor:this,event:s.event,transaction:o}),c&&this.emit(`blur`,{editor:this,event:c.event,transaction:o}),!(e.getMeta(`preventUpdate`)||!n.some(e=>e.docChanged)||a.doc.eq(t.doc))&&this.emit(`update`,{editor:this,transaction:e,appendedTransactions:n.slice(1)})}getAttributes(e){return w$(this.state,e)}isActive(e,t){let n=typeof e==`string`?e:null,r=typeof e==`string`?t:e;return wFe(this.state,n,r)}getJSON(){return this.state.doc.toJSON()}getHTML(){return l$(this.state.doc.content,this.schema)}getText(e){let{blockSeparator:t=`
+}`,BIe=class extends nIe{constructor(e={}){super(),this.css=null,this.className=`tiptap`,this.editorView=null,this.isFocused=!1,this.destroyed=!1,this.isInitialized=!1,this.extensionStorage={},this.instanceId=Math.random().toString(36).slice(2,9),this.hasWarnedStaleDecorationRead=!1,this.options={element:typeof document<`u`?document.createElement(`div`):null,content:``,injectCSS:!0,injectNonce:void 0,extensions:[],autofocus:!1,editable:!0,textDirection:void 0,editorProps:{},parseOptions:{},coreExtensionOptions:{},enableInputRules:!0,enablePasteRules:!0,enableCoreExtensions:!0,enableContentCheck:!1,emitContentError:!1,onBeforeCreate:()=>null,onCreate:()=>null,onMount:()=>null,onUnmount:()=>null,onUpdate:()=>null,onSelectionUpdate:()=>null,onTransaction:()=>null,onFocus:()=>null,onBlur:()=>null,onDestroy:()=>null,onContentError:({error:e})=>{throw e},onPaste:()=>null,onDrop:()=>null,onDelete:()=>null,enableExtensionDispatchTransaction:!0},this.isCapturingTransaction=!1,this.capturedTransaction=null,this.utils={getUpdatedPosition:OFe,createMappablePosition:kFe},this.setOptions(e),this.createExtensionManager(),this.createCommandManager(),this.createSchema(),this.on(`beforeCreate`,this.options.onBeforeCreate),this.emit(`beforeCreate`,{editor:this}),this.on(`mount`,this.options.onMount),this.on(`unmount`,this.options.onUnmount),this.on(`contentError`,this.options.onContentError),this.on(`create`,this.options.onCreate),this.on(`update`,this.options.onUpdate),this.on(`selectionUpdate`,this.options.onSelectionUpdate),this.on(`transaction`,this.options.onTransaction),this.on(`focus`,this.options.onFocus),this.on(`blur`,this.options.onBlur),this.on(`destroy`,this.options.onDestroy),this.on(`drop`,({event:e,slice:t,moved:n})=>this.options.onDrop(e,t,n)),this.on(`paste`,({event:e,slice:t})=>this.options.onPaste(e,t)),this.on(`delete`,this.options.onDelete);let t=this.createDoc();if(!this.editorState){let e=KQ(t,this.options.autofocus);this.editorState=fY.create({doc:t,schema:this.schema,selection:e||void 0})}LIe(this.schema),this.options.element&&this.mount(this.options.element)}mount(e){if(typeof document>`u`)throw Error(`[tiptap error]: The editor cannot be mounted because there is no 'document' defined in this environment.`);this.createView(e),this.emit(`mount`,{editor:this}),this.css&&!document.head.contains(this.css)&&document.head.appendChild(this.css),window.setTimeout(()=>{this.isDestroyed||(this.options.autofocus!==!1&&this.options.autofocus!==null&&this.commands.focus(this.options.autofocus),this.emit(`create`,{editor:this}),this.isInitialized=!0)},0)}unmount(){if(this.editorView){this.editorState=this.editorView.state;let e=this.editorView.dom;e?.editor&&delete e.editor,this.editorView.destroy()}if(this.editorView=null,this.isInitialized=!1,this.css&&!document.querySelectorAll(`.${this.className}`).length)try{typeof this.css.remove==`function`?this.css.remove():this.css.parentNode&&this.css.parentNode.removeChild(this.css)}catch(e){console.warn(`Failed to remove CSS element:`,e)}this.css=null,this.emit(`unmount`,{editor:this})}get storage(){return this.extensionStorage}get commands(){return this.commandManager.commands}chain(){return this.commandManager?this.commandManager.chain():FQ.createFakeChain()}can(){return this.commandManager?this.commandManager.can():FQ.createFallbackCan()}injectCSS(){this.options.injectCSS&&typeof document<`u`&&(this.css=gIe(zIe,this.options.injectNonce))}setOptions(e={}){this.options={...this.options,...e},!(!this.editorView||!this.state||this.isDestroyed)&&(this.options.editorProps&&this.view.setProps(this.options.editorProps),this.view.updateState(this.state))}setEditable(e,t=!0){this.setOptions({editable:e}),t&&this.emit(`update`,{editor:this,transaction:this.state.tr,appendedTransactions:[]})}get isEditable(){return this.options.editable&&this.view&&this.view.editable}get view(){return this.editorView?this.editorView:new Proxy({state:this.editorState,updateState:e=>{this.editorState=e},dispatch:e=>{this.dispatchTransaction(e)},composing:!1,dragging:null,editable:!0,isDestroyed:!1},{get:(e,t)=>{if(this.editorView)return this.editorView[t];if(t===`state`)return this.editorState;if(t in e)return Reflect.get(e,t);throw Error(`[tiptap error]: The editor view is not available. Cannot access view['${t}']. The editor may not be mounted yet.`)}})}get state(){return G$&&!this.hasWarnedStaleDecorationRead&&tIe(this)&&(this.hasWarnedStaleDecorationRead=!0,console.warn("[tiptap warn]: `editor.state` was read while decoration `create()` was running. It returns the pre-transaction document. Use the `state` argument passed to `create()` instead. Helpers like `editor.isActive()` read `editor.state` too, so pass `state` to their standalone versions instead of calling them on the editor.")),this.editorView&&(this.editorState=this.view.state),this.editorState}registerPlugin(e,t){let n=p$(t)?t(e,[...this.state.plugins]):[...this.state.plugins,e],r=this.state.reconfigure({plugins:n});return this.view.updateState(r),r}unregisterPlugin(e){if(this.isDestroyed)return;let t=this.state.plugins,n=t;if([].concat(e).forEach(e=>{let t=typeof e==`string`?`${e}$`:e.key;n=n.filter(e=>!e.key.startsWith(t))}),t.length===n.length)return;let r=this.state.reconfigure({plugins:n});return this.view.updateState(r),r}createExtensionManager(){var e,t;let n=[...this.options.enableCoreExtensions?[AIe,EIe.configure({blockSeparator:(e=this.options.coreExtensionOptions)==null||(e=e.clipboardTextSerializer)==null?void 0:e.blockSeparator}),DIe,MIe,NIe,FIe.configure({value:(t=this.options.coreExtensionOptions)==null||(t=t.tabindex)==null?void 0:t.value}),kIe,PIe,OIe,IIe.configure({direction:this.options.textDirection})].filter(e=>typeof this.options.enableCoreExtensions==`object`?this.options.enableCoreExtensions[e.name]!==!1:!0):[],...this.options.extensions].filter(e=>[`extension`,`node`,`mark`].includes(e?.type));this.extensionManager=new f1(n,this)}createCommandManager(){this.commandManager=new FQ({editor:this})}createSchema(){this.schema=this.extensionManager.schema}createDoc(){let e;try{e=o$(this.options.content,this.schema,this.options.parseOptions,{errorOnInvalidContent:this.options.enableContentCheck})}catch(e){if(!(e instanceof Error)||![`[tiptap error]: Invalid JSON content`,`[tiptap error]: Invalid HTML content`].includes(e.message))throw e;let t=o$(this.options.content,this.schema,this.options.parseOptions,{errorOnInvalidContent:!1});return this.editorState=fY.create({doc:t,schema:this.schema,selection:KQ(t,this.options.autofocus)||void 0}),this.emit(`contentError`,{editor:this,error:e,disableCollaboration:()=>{`collaboration`in this.storage&&typeof this.storage.collaboration==`object`&&this.storage.collaboration&&(this.storage.collaboration.isDisabled=!0),this.options.extensions=this.options.extensions.filter(e=>e.name!==`collaboration`),this.createExtensionManager()}}),this.editorState.doc}return e}createView(e){let{editorProps:t,enableExtensionDispatchTransaction:n}=this.options,r=t.dispatchTransaction||this.dispatchTransaction.bind(this),i=n?this.extensionManager.dispatchTransaction(r):r,a=t.transformPastedHTML,o=this.extensionManager.transformPastedHTML(a);this.editorView=new SQ(e,{...t,attributes:{role:`textbox`,...t?.attributes},dispatchTransaction:i,transformPastedHTML:o,state:this.editorState,markViews:this.extensionManager.markViews,nodeViews:this.extensionManager.nodeViews});let s=this.state.reconfigure({plugins:this.extensionManager.plugins});this.view.updateState(s),this.prependClass(),this.injectCSS();let c=this.view.dom;c.editor=this}createNodeViews(){this.view.isDestroyed||this.view.setProps({markViews:this.extensionManager.markViews,nodeViews:this.extensionManager.nodeViews})}prependClass(){this.view.dom.className=`${this.className} ${this.view.dom.className}`}captureTransaction(e){this.isCapturingTransaction=!0,e(),this.isCapturingTransaction=!1;let t=this.capturedTransaction;return this.capturedTransaction=null,t}dispatchTransaction(e){if(this.view.isDestroyed)return;if(this.isCapturingTransaction){if(!this.capturedTransaction){this.capturedTransaction=e;return}e.steps.forEach(e=>this.capturedTransaction?.step(e));return}let{state:t,transactions:n}=this.state.applyTransaction(e),r=!this.state.selection.eq(t.selection),i=n.includes(e),a=this.state;if(this.emit(`beforeTransaction`,{editor:this,transaction:e,nextState:t}),!i)return;this.view.updateState(t),this.emit(`transaction`,{editor:this,transaction:e,appendedTransactions:n.slice(1)}),r&&this.emit(`selectionUpdate`,{editor:this,transaction:e});let o=n.findLast(e=>e.getMeta(`focus`)||e.getMeta(`blur`)),s=o?.getMeta(`focus`),c=o?.getMeta(`blur`);s&&this.emit(`focus`,{editor:this,event:s.event,transaction:o}),c&&this.emit(`blur`,{editor:this,event:c.event,transaction:o}),!(e.getMeta(`preventUpdate`)||!n.some(e=>e.docChanged)||a.doc.eq(t.doc))&&this.emit(`update`,{editor:this,transaction:e,appendedTransactions:n.slice(1)})}getAttributes(e){return D$(this.state,e)}isActive(e,t){let n=typeof e==`string`?e:null,r=typeof e==`string`?t:e;return TFe(this.state,n,r)}getJSON(){return this.state.doc.toJSON()}getHTML(){return f$(this.state.doc.content,this.schema)}getText(e){let{blockSeparator:t=`
 
-`,textSerializers:n={}}=e||{};return _Fe(this.state.doc,{blockSeparator:t,textSerializers:{...C$(this.schema),...n}})}get isEmpty(){return M$(this.state.doc)}destroy(){this.destroyed||(this.destroyed=!0,this.emit(`destroy`),this.unmount(),this.removeAllListeners(),this.extensionManager.destroy(),this.extensionManager=null,this.schema=null,this.commandManager=null,this.extensionStorage={})}get isDestroyed(){return this.editorView?.isDestroyed??!0}$node(e,t){return this.$doc?.querySelector(e,t)||null}$nodes(e,t){return this.$doc?.querySelectorAll(e,t)||null}$pos(e){let t=this.state.doc.resolve(e),n=e>0&&t.nodeAfter&&!t.nodeAfter.isText&&t.nodeAfter.isAtom?t.nodeAfter:null;return new LIe(t,this,!1,n)}get $doc(){return this.$pos(0)}};function f1(e){return new r1({find:e.find,handler:({state:t,range:n,match:r})=>{let i=d$(e.getAttributes,void 0,r);if(i===!1||i===null)return null;let{tr:a}=t,o=r[r.length-1],s=r[0];if(o){let r=s.search(/\S/),c=n.from+s.indexOf(o),l=c+o.length;if(E$(n.from,n.to,t.doc).filter(t=>t.mark.type.excluded.find(n=>n===e.type&&n!==t.mark.type)).filter(e=>e.to>c).length)return null;l<n.to&&a.delete(l,n.to),c>n.from&&a.delete(n.from+r,c);let u=n.from+r+o.length;a.addMark(n.from+r,u,e.type.create(i||{})),a.removeStoredMark(e.type)}},undoable:e.undoable})}function p1(e){return new r1({find:e.find,handler:({state:t,range:n,match:r})=>{let i=d$(e.getAttributes,void 0,r)||{},{tr:a}=t,o=n.from,s=n.to,c=e.type.create(i);if(r[1]){let e=o+r[0].lastIndexOf(r[1]);e>s?e=s:s=e+r[1].length;let t=r[0][r[0].length-1];a.insertText(t,o+r[0].length-1),a.replaceWith(e,s,c)}else if(r[0]){let t=e.type.isInline?o:o-1;a.insert(t,e.type.create(i)).delete(a.mapping.map(o),a.mapping.map(s))}a.scrollIntoView()},undoable:e.undoable})}function m1(e){return new r1({find:e.find,handler:({state:t,range:n,match:r})=>{let i=t.doc.resolve(n.from),a=d$(e.getAttributes,void 0,r)||{};if(!i.node(-1).canReplaceWith(i.index(-1),i.indexAfter(-1),e.type))return null;t.tr.delete(n.from,n.to).setBlockType(n.from,n.from,e.type,a)},undoable:e.undoable})}function h1(e){return new r1({find:e.find,handler:({state:t,range:n,match:r,chain:i})=>{let a=d$(e.getAttributes,void 0,r)||{},o=t.tr.delete(n.from,n.to),s=o.doc.resolve(n.from).blockRange(),c=s&&wJ(s,e.type,a);if(!c)return null;if(o.wrap(s,c),e.keepMarks&&e.editor){let{selection:n,storedMarks:r}=t,{splittableMarks:i}=e.editor.extensionManager,a=r||n.$to.parentOffset&&n.$from.marks();if(a){let e=a.filter(e=>i.includes(e.type.name));o.ensureMarks(e)}}if(e.keepAttributes){let t=e.type.name===`bulletList`||e.type.name===`orderedList`?`listItem`:`taskList`;i().updateAttributes(t,a).run()}let l=o.doc.resolve(n.from-1).nodeBefore;l&&l.type===e.type&&kJ(o.doc,n.from-1)&&(!e.joinPredicate||e.joinPredicate(r,l))&&o.join(n.from-1)},undoable:e.undoable})}var BIe=e=>`touches`in e,VIe=class{constructor(e){var t;this.directions=[`bottom-left`,`bottom-right`,`top-left`,`top-right`],this.minSize={height:8,width:8},this.preserveAspectRatio=!1,this.classNames={container:``,wrapper:``,handle:``,resizing:``},this.initialWidth=0,this.initialHeight=0,this.aspectRatio=1,this.isResizing=!1,this.activeHandle=null,this.startX=0,this.startY=0,this.startWidth=0,this.startHeight=0,this.isShiftKeyPressed=!1,this.lastEditableState=void 0,this.handleMap=new Map,this.handleMouseMove=e=>{if(!this.isResizing||!this.activeHandle)return;let t=e.clientX-this.startX,n=e.clientY-this.startY;this.handleResize(t,n)},this.handleTouchMove=e=>{if(!this.isResizing||!this.activeHandle)return;let t=e.touches[0];if(!t)return;let n=t.clientX-this.startX,r=t.clientY-this.startY;this.handleResize(n,r)},this.handleMouseUp=()=>{if(!this.isResizing)return;let e=this.element.offsetWidth,t=this.element.offsetHeight;this.onCommit(e,t),this.isResizing=!1,this.activeHandle=null,this.container.dataset.resizeState=`false`,this.classNames.resizing&&this.container.classList.remove(this.classNames.resizing),document.removeEventListener(`mousemove`,this.handleMouseMove),document.removeEventListener(`mouseup`,this.handleMouseUp),document.removeEventListener(`keydown`,this.handleKeyDown),document.removeEventListener(`keyup`,this.handleKeyUp)},this.handleKeyDown=e=>{e.key===`Shift`&&(this.isShiftKeyPressed=!0)},this.handleKeyUp=e=>{e.key===`Shift`&&(this.isShiftKeyPressed=!1)},this.node=e.node,this.editor=e.editor,this.element=e.element,this.element.draggable=!1,this.contentElement=e.contentElement,this.getPos=e.getPos,this.onResize=e.onResize,this.onCommit=e.onCommit,this.onUpdate=e.onUpdate,e.options?.min&&(this.minSize={...this.minSize,...e.options.min}),e.options?.max&&(this.maxSize=e.options.max),!(e==null||(t=e.options)==null)&&t.directions&&(this.directions=e.options.directions),e.options?.preserveAspectRatio&&(this.preserveAspectRatio=e.options.preserveAspectRatio),e.options?.className&&(this.classNames={container:e.options.className.container||``,wrapper:e.options.className.wrapper||``,handle:e.options.className.handle||``,resizing:e.options.className.resizing||``}),e.options?.createCustomHandle&&(this.createCustomHandle=e.options.createCustomHandle),this.wrapper=this.createWrapper(),this.container=this.createContainer(),this.applyInitialSize(),this.attachHandles(),this.editor.on(`update`,this.handleEditorUpdate.bind(this))}get dom(){return this.container}get contentDOM(){return this.contentElement??null}handleEditorUpdate(){let e=this.editor.isEditable;e!==this.lastEditableState&&(this.lastEditableState=e,e?e&&this.handleMap.size===0&&this.attachHandles():this.removeHandles())}update(e,t,n){return e.type===this.node.type?(this.node=e,this.onUpdate?this.onUpdate(e,t,n):!0):!1}destroy(){this.isResizing&&(this.container.dataset.resizeState=`false`,this.classNames.resizing&&this.container.classList.remove(this.classNames.resizing),document.removeEventListener(`mousemove`,this.handleMouseMove),document.removeEventListener(`mouseup`,this.handleMouseUp),document.removeEventListener(`keydown`,this.handleKeyDown),document.removeEventListener(`keyup`,this.handleKeyUp),this.isResizing=!1,this.activeHandle=null),this.editor.off(`update`,this.handleEditorUpdate.bind(this)),this.container.remove()}createContainer(){let e=document.createElement(`div`);return e.dataset.resizeContainer=``,e.dataset.node=this.node.type.name,e.style.display=this.node.type.isInline?`inline-flex`:`flex`,this.classNames.container&&(e.className=this.classNames.container),e.appendChild(this.wrapper),e}createWrapper(){let e=document.createElement(`div`);return e.style.position=`relative`,e.style.display=`block`,e.dataset.resizeWrapper=``,this.classNames.wrapper&&(e.className=this.classNames.wrapper),e.appendChild(this.element),e}createHandle(e){let t=document.createElement(`div`);return t.dataset.resizeHandle=e,t.style.position=`absolute`,this.classNames.handle&&(t.className=this.classNames.handle),t}positionHandle(e,t){let n=t.includes(`top`),r=t.includes(`bottom`),i=t.includes(`left`),a=t.includes(`right`);n&&(e.style.top=`0`),r&&(e.style.bottom=`0`),i&&(e.style.left=`0`),a&&(e.style.right=`0`),(t===`top`||t===`bottom`)&&(e.style.left=`0`,e.style.right=`0`),(t===`left`||t===`right`)&&(e.style.top=`0`,e.style.bottom=`0`)}attachHandles(){this.directions.forEach(e=>{let t;t=this.createCustomHandle?this.createCustomHandle(e):this.createHandle(e),t instanceof HTMLElement||(console.warn(`[ResizableNodeView] createCustomHandle("${e}") did not return an HTMLElement. Falling back to default handle.`),t=this.createHandle(e)),this.createCustomHandle||this.positionHandle(t,e),t.addEventListener(`mousedown`,t=>this.handleResizeStart(t,e)),t.addEventListener(`touchstart`,t=>this.handleResizeStart(t,e)),this.handleMap.set(e,t),this.wrapper.appendChild(t)})}removeHandles(){this.handleMap.forEach(e=>e.remove()),this.handleMap.clear()}applyInitialSize(){let e=this.node.attrs.width,t=this.node.attrs.height;e?(this.element.style.width=`${e}px`,this.initialWidth=e):this.initialWidth=this.element.offsetWidth,t?(this.element.style.height=`${t}px`,this.initialHeight=t):this.initialHeight=this.element.offsetHeight,this.initialWidth>0&&this.initialHeight>0&&(this.aspectRatio=this.initialWidth/this.initialHeight)}handleResizeStart(e,t){e.preventDefault(),e.stopPropagation(),this.isResizing=!0,this.activeHandle=t,BIe(e)?(this.startX=e.touches[0].clientX,this.startY=e.touches[0].clientY):(this.startX=e.clientX,this.startY=e.clientY),this.startWidth=this.element.offsetWidth,this.startHeight=this.element.offsetHeight,this.startWidth>0&&this.startHeight>0&&(this.aspectRatio=this.startWidth/this.startHeight),this.getPos(),this.container.dataset.resizeState=`true`,this.classNames.resizing&&this.container.classList.add(this.classNames.resizing),document.addEventListener(`mousemove`,this.handleMouseMove),document.addEventListener(`touchmove`,this.handleTouchMove),document.addEventListener(`mouseup`,this.handleMouseUp),document.addEventListener(`keydown`,this.handleKeyDown),document.addEventListener(`keyup`,this.handleKeyUp)}handleResize(e,t){if(!this.activeHandle)return;let n=this.preserveAspectRatio||this.isShiftKeyPressed,{width:r,height:i}=this.calculateNewDimensions(this.activeHandle,e,t),a=this.applyConstraints(r,i,n);this.element.style.width=`${a.width}px`,this.element.style.height=`${a.height}px`,this.onResize&&this.onResize(a.width,a.height)}calculateNewDimensions(e,t,n){let r=this.startWidth,i=this.startHeight,a=e.includes(`right`),o=e.includes(`left`),s=e.includes(`bottom`),c=e.includes(`top`);return a?r=this.startWidth+t:o&&(r=this.startWidth-t),s?i=this.startHeight+n:c&&(i=this.startHeight-n),(e===`right`||e===`left`)&&(r=this.startWidth+(a?t:-t)),(e===`top`||e===`bottom`)&&(i=this.startHeight+(s?n:-n)),this.preserveAspectRatio||this.isShiftKeyPressed?this.applyAspectRatio(r,i,e):{width:r,height:i}}applyConstraints(e,t,n){if(!n){let n=Math.max(this.minSize.width,e),r=Math.max(this.minSize.height,t);return this.maxSize?.width&&(n=Math.min(this.maxSize.width,n)),this.maxSize?.height&&(r=Math.min(this.maxSize.height,r)),{width:n,height:r}}let r=e,i=t;return r<this.minSize.width&&(r=this.minSize.width,i=r/this.aspectRatio),i<this.minSize.height&&(i=this.minSize.height,r=i*this.aspectRatio),this.maxSize?.width&&r>this.maxSize.width&&(r=this.maxSize.width,i=r/this.aspectRatio),this.maxSize?.height&&i>this.maxSize.height&&(i=this.maxSize.height,r=i*this.aspectRatio),{width:r,height:i}}applyAspectRatio(e,t,n){return n===`left`||n===`right`?{width:e,height:e/this.aspectRatio}:n===`top`||n===`bottom`?{width:t*this.aspectRatio,height:t}:{width:e,height:e/this.aspectRatio}}},g1=class e extends a1{constructor(...e){super(...e),this.type=`node`}static create(t={}){return new e(typeof t==`function`?t():t)}configure(e){return super.configure(e)}extend(e){let t=typeof e==`function`?e():e;return super.extend(t)}};function _1(e){return new s1({find:e.find,handler:({state:t,range:n,match:r,pasteEvent:i})=>{let a=d$(e.getAttributes,void 0,r,i);if(a===!1||a===null)return null;let{tr:o}=t,s=r[r.length-1],c=r[0],l=n.to;if(s){let i=c.search(/\S/),u=n.from+c.indexOf(s),d=u+s.length;if(E$(n.from,n.to,t.doc).filter(t=>t.mark.type.excluded.find(n=>n===e.type&&n!==t.mark.type)).filter(e=>e.to>u).length)return null;d<n.to&&o.delete(d,n.to),u>n.from&&o.delete(n.from+i,u),l=n.from+i+s.length,o.addMark(n.from+i,l,e.type.create(a||{})),r.index!==void 0&&r.input!==void 0&&r.index+r[0].length>=r.input.length||o.removeStoredMark(e.type)}}})}var{getOwnPropertyNames:HIe,getOwnPropertySymbols:UIe}=Object,{hasOwnProperty:WIe}=Object.prototype;function v1(e,t){return function(n,r,i){return e(n,r,i)&&t(n,r,i)}}function y1(e){return function(t,n,r){if(!t||!n||typeof t!=`object`||typeof n!=`object`)return e(t,n,r);let{cache:i}=r,a=i.get(t),o=i.get(n);if(a&&o)return a===n&&o===t;i.set(t,n),i.set(n,t);let s=e(t,n,r);return i.delete(t),i.delete(n),s}}function GIe(e){return e?.[Symbol.toStringTag]}function b1(e){return HIe(e).concat(UIe(e))}var KIe=Object.hasOwn||((e,t)=>WIe.call(e,t));function x1(e,t){return e===t||!e&&!t&&e!==e&&t!==t}var qIe=`__v`,JIe=`__o`,YIe=`_owner`,{getOwnPropertyDescriptor:S1,keys:C1}=Object;function XIe(e,t){return e.byteLength===t.byteLength&&D1(new Uint8Array(e),new Uint8Array(t))}function ZIe(e,t,n){let r=e.length;if(t.length!==r)return!1;for(;r-- >0;)if(!n.equals(e[r],t[r],r,r,e,t,n))return!1;return!0}function QIe(e,t){return e.byteLength===t.byteLength&&D1(new Uint8Array(e.buffer,e.byteOffset,e.byteLength),new Uint8Array(t.buffer,t.byteOffset,t.byteLength))}function $Ie(e,t){return x1(e.getTime(),t.getTime())}function eLe(e,t){return e.name===t.name&&e.message===t.message&&e.cause===t.cause&&e.stack===t.stack}function tLe(e,t){return e===t}function w1(e,t,n){let r=e.size;if(r!==t.size)return!1;if(!r)return!0;let i=Array(r),a=e.entries(),o,s,c=0;for(;(o=a.next())&&!o.done;){let r=t.entries(),a=!1,l=0;for(;(s=r.next())&&!s.done;){if(i[l]){l++;continue}let r=o.value,u=s.value;if(n.equals(r[0],u[0],c,l,e,t,n)&&n.equals(r[1],u[1],r[0],u[0],e,t,n)){a=i[l]=!0;break}l++}if(!a)return!1;c++}return!0}var nLe=x1;function rLe(e,t,n){let r=C1(e),i=r.length;if(C1(t).length!==i)return!1;for(;i-- >0;)if(!O1(e,t,n,r[i]))return!1;return!0}function T1(e,t,n){let r=b1(e),i=r.length;if(b1(t).length!==i)return!1;let a,o,s;for(;i-- >0;)if(a=r[i],!O1(e,t,n,a)||(o=S1(e,a),s=S1(t,a),(o||s)&&(!o||!s||o.configurable!==s.configurable||o.enumerable!==s.enumerable||o.writable!==s.writable)))return!1;return!0}function iLe(e,t){return x1(e.valueOf(),t.valueOf())}function aLe(e,t){return e.source===t.source&&e.flags===t.flags}function E1(e,t,n){let r=e.size;if(r!==t.size)return!1;if(!r)return!0;let i=Array(r),a=e.values(),o,s;for(;(o=a.next())&&!o.done;){let r=t.values(),a=!1,c=0;for(;(s=r.next())&&!s.done;){if(!i[c]&&n.equals(o.value,s.value,o.value,s.value,e,t,n)){a=i[c]=!0;break}c++}if(!a)return!1}return!0}function D1(e,t){let n=e.byteLength;if(t.byteLength!==n||e.byteOffset!==t.byteOffset)return!1;for(;n-- >0;)if(e[n]!==t[n])return!1;return!0}function oLe(e,t){return e.hostname===t.hostname&&e.pathname===t.pathname&&e.protocol===t.protocol&&e.port===t.port&&e.hash===t.hash&&e.username===t.username&&e.password===t.password}function O1(e,t,n,r){return(r===YIe||r===JIe||r===qIe)&&(e.$$typeof||t.$$typeof)?!0:KIe(t,r)&&n.equals(e[r],t[r],r,r,e,t,n)}var sLe=`[object ArrayBuffer]`,cLe=`[object Arguments]`,lLe=`[object Boolean]`,uLe=`[object DataView]`,dLe=`[object Date]`,fLe=`[object Error]`,pLe=`[object Map]`,mLe=`[object Number]`,hLe=`[object Object]`,gLe=`[object RegExp]`,_Le=`[object Set]`,vLe=`[object String]`,yLe={"[object Int8Array]":!0,"[object Uint8Array]":!0,"[object Uint8ClampedArray]":!0,"[object Int16Array]":!0,"[object Uint16Array]":!0,"[object Int32Array]":!0,"[object Uint32Array]":!0,"[object Float16Array]":!0,"[object Float32Array]":!0,"[object Float64Array]":!0,"[object BigInt64Array]":!0,"[object BigUint64Array]":!0},bLe=`[object URL]`,xLe=Object.prototype.toString;function SLe({areArrayBuffersEqual:e,areArraysEqual:t,areDataViewsEqual:n,areDatesEqual:r,areErrorsEqual:i,areFunctionsEqual:a,areMapsEqual:o,areNumbersEqual:s,areObjectsEqual:c,arePrimitiveWrappersEqual:l,areRegExpsEqual:u,areSetsEqual:d,areTypedArraysEqual:f,areUrlsEqual:p,unknownTagComparators:m}){return function(h,g,_){if(h===g)return!0;if(h==null||g==null)return!1;let v=typeof h;if(v!==typeof g)return!1;if(v!==`object`)return v===`number`?s(h,g,_):v===`function`?a(h,g,_):!1;let y=h.constructor;if(y!==g.constructor)return!1;if(y===Object)return c(h,g,_);if(Array.isArray(h))return t(h,g,_);if(y===Date)return r(h,g,_);if(y===RegExp)return u(h,g,_);if(y===Map)return o(h,g,_);if(y===Set)return d(h,g,_);let b=xLe.call(h);if(b===dLe)return r(h,g,_);if(b===gLe)return u(h,g,_);if(b===pLe)return o(h,g,_);if(b===_Le)return d(h,g,_);if(b===hLe)return typeof h.then!=`function`&&typeof g.then!=`function`&&c(h,g,_);if(b===bLe)return p(h,g,_);if(b===fLe)return i(h,g,_);if(b===cLe)return c(h,g,_);if(yLe[b])return f(h,g,_);if(b===sLe)return e(h,g,_);if(b===uLe)return n(h,g,_);if(b===lLe||b===mLe||b===vLe)return l(h,g,_);if(m){let e=m[b];if(!e){let t=GIe(h);t&&(e=m[t])}if(e)return e(h,g,_)}return!1}}function CLe({circular:e,createCustomConfig:t,strict:n}){let r={areArrayBuffersEqual:XIe,areArraysEqual:n?T1:ZIe,areDataViewsEqual:QIe,areDatesEqual:$Ie,areErrorsEqual:eLe,areFunctionsEqual:tLe,areMapsEqual:n?v1(w1,T1):w1,areNumbersEqual:nLe,areObjectsEqual:n?T1:rLe,arePrimitiveWrappersEqual:iLe,areRegExpsEqual:aLe,areSetsEqual:n?v1(E1,T1):E1,areTypedArraysEqual:n?v1(D1,T1):D1,areUrlsEqual:oLe,unknownTagComparators:void 0};if(t&&(r=Object.assign({},r,t(r))),e){let e=y1(r.areArraysEqual),t=y1(r.areMapsEqual),n=y1(r.areObjectsEqual),i=y1(r.areSetsEqual);r=Object.assign({},r,{areArraysEqual:e,areMapsEqual:t,areObjectsEqual:n,areSetsEqual:i})}return r}function wLe(e){return function(t,n,r,i,a,o,s){return e(t,n,s)}}function TLe({circular:e,comparator:t,createState:n,equals:r,strict:i}){if(n)return function(a,o){let{cache:s=e?new WeakMap:void 0,meta:c}=n();return t(a,o,{cache:s,equals:r,meta:c,strict:i})};if(e)return function(e,n){return t(e,n,{cache:new WeakMap,equals:r,meta:void 0,strict:i})};let a={cache:void 0,equals:r,meta:void 0,strict:i};return function(e,n){return t(e,n,a)}}var ELe=k1();k1({strict:!0}),k1({circular:!0}),k1({circular:!0,strict:!0}),k1({createInternalComparator:()=>x1}),k1({strict:!0,createInternalComparator:()=>x1}),k1({circular:!0,createInternalComparator:()=>x1}),k1({circular:!0,createInternalComparator:()=>x1,strict:!0});function k1(e={}){let{circular:t=!1,createInternalComparator:n,createState:r,strict:i=!1}=e,a=SLe(CLe(e));return TLe({circular:t,comparator:a,createState:r,equals:n?n(a):wLe(a),strict:i})}var DLe=(...e)=>t=>{e.forEach(e=>{typeof e==`function`?e(t):e&&(e.current=t)})},OLe=({contentComponent:e})=>{let t=(0,Qe.useSyncExternalStore)(e.subscribe,e.getSnapshot,e.getServerSnapshot);return(0,G.jsx)(G.Fragment,{children:Object.values(t)})};function kLe(){let e=new Set,t={},n=!1,r=()=>{n||!e.size||(n=!0,queueMicrotask(()=>{n=!1,e.forEach(e=>e())}))};return{subscribe(t){return e.add(t),()=>{e.delete(t)}},getSnapshot(){return t},getServerSnapshot(){return t},setRenderer(e,n){t={...t,[e]:At.createPortal(n.reactElement,n.element,e)},r()},removeRenderer(e){let n={...t};delete n[e],t=n,r()}}}var ALe=class extends y.Component{constructor(e){super(e),this.editorContentRef=y.createRef()}componentDidMount(){this.init()}componentDidUpdate(){this.init()}init(){let e=this.props.editor;if(e&&!e.isDestroyed&&e.view.dom?.parentNode){if(e.contentComponent)return;let t=this.editorContentRef.current;t.append(...e.view.dom.parentNode.childNodes),e.setOptions({element:t}),e.contentComponent=kLe(),e.createNodeViews(),e.isEditorContentInitialized=!0,this.forceUpdate()}}componentWillUnmount(){let e=this.props.editor;if(e){e.isEditorContentInitialized=!1,e.isDestroyed||e.view.setProps({nodeViews:{}}),e.contentComponent=null;try{if(!e.view.dom?.parentNode)return;let t=document.createElement(`div`);t.append(...e.view.dom.parentNode.childNodes),e.setOptions({element:t})}catch{}}}render(){let{editor:e,innerRef:t,...n}=this.props;return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{ref:DLe(t,this.editorContentRef),...n}),e?.contentComponent&&(0,G.jsx)(OLe,{contentComponent:e.contentComponent})]})}},jLe=(0,y.forwardRef)((e,t)=>{let n=y.useMemo(()=>Math.floor(Math.random()*4294967295).toString(),[e.editor]);return y.createElement(ALe,{key:n,innerRef:t,...e})}),A1=y.memo(jLe),MLe=typeof window<`u`?y.useLayoutEffect:y.useEffect,NLe=class{constructor(e){this.transactionNumber=0,this.lastTransactionNumber=0,this.subscribers=new Set,this.editor=e,this.lastSnapshot={editor:e,transactionNumber:0},this.getSnapshot=this.getSnapshot.bind(this),this.getServerSnapshot=this.getServerSnapshot.bind(this),this.watch=this.watch.bind(this),this.subscribe=this.subscribe.bind(this)}getSnapshot(){return this.transactionNumber===this.lastTransactionNumber?this.lastSnapshot:(this.lastTransactionNumber=this.transactionNumber,this.lastSnapshot={editor:this.editor,transactionNumber:this.transactionNumber},this.lastSnapshot)}getServerSnapshot(){return{editor:null,transactionNumber:0}}subscribe(e){return this.subscribers.add(e),()=>{this.subscribers.delete(e)}}watch(e){if(this.editor=e,this.editor){let e,t=t=>{t?.transaction!==void 0&&t.transaction===e||(e=t?.transaction,this.transactionNumber+=1,this.subscribers.forEach(e=>e()))},n=this.editor;return n.on(`transaction`,t),n.on(`update`,t),()=>{n.off(`transaction`,t),n.off(`update`,t)}}}};function PLe(e){let[t]=(0,y.useState)(()=>new NLe(e.editor)),n=(0,zD.useSyncExternalStoreWithSelector)(t.subscribe,t.getSnapshot,t.getServerSnapshot,e.selector,e.equalityFn??ELe);return MLe(()=>t.watch(e.editor),[e.editor,t]),(0,y.useDebugValue)(n),n}var j1=typeof window>`u`,FLe=j1||!!(typeof window<`u`&&window.next),ILe=class e{constructor(e){this.editor=null,this.subscriptions=new Set,this.isComponentMounted=!1,this.previousDeps=null,this.instanceId=``,this.options=e,this.subscriptions=new Set,this.setEditor(this.getInitialEditor()),this.scheduleDestroy(),this.getEditor=this.getEditor.bind(this),this.getServerSnapshot=this.getServerSnapshot.bind(this),this.subscribe=this.subscribe.bind(this),this.refreshEditorInstance=this.refreshEditorInstance.bind(this),this.scheduleDestroy=this.scheduleDestroy.bind(this),this.onRender=this.onRender.bind(this),this.createEditor=this.createEditor.bind(this)}setEditor(e){this.editor=e,this.instanceId=Math.random().toString(36).slice(2,9),this.subscriptions.forEach(e=>e())}getInitialEditor(){let e=this.options.current.immediatelyRender,t=e??!0;return(j1||FLe&&e===void 0)&&(t=!1),t?this.createEditor():null}createEditor(){return new zIe({...this.options.current,onBeforeCreate:(...e)=>{var t;return(t=this.options.current).onBeforeCreate?.call(t,...e)},onBlur:(...e)=>{var t;return(t=this.options.current).onBlur?.call(t,...e)},onCreate:(...e)=>{var t;return(t=this.options.current).onCreate?.call(t,...e)},onDestroy:(...e)=>{var t;return(t=this.options.current).onDestroy?.call(t,...e)},onFocus:(...e)=>{var t;return(t=this.options.current).onFocus?.call(t,...e)},onSelectionUpdate:(...e)=>{var t;return(t=this.options.current).onSelectionUpdate?.call(t,...e)},onTransaction:(...e)=>{var t;return(t=this.options.current).onTransaction?.call(t,...e)},onUpdate:(...e)=>{var t;return(t=this.options.current).onUpdate?.call(t,...e)},onContentError:(...e)=>{var t;return(t=this.options.current).onContentError?.call(t,...e)},onDrop:(...e)=>{var t;return(t=this.options.current).onDrop?.call(t,...e)},onPaste:(...e)=>{var t;return(t=this.options.current).onPaste?.call(t,...e)},onDelete:(...e)=>{var t;return(t=this.options.current).onDelete?.call(t,...e)},onMount:(...e)=>{var t;return(t=this.options.current).onMount?.call(t,...e)},onUnmount:(...e)=>{var t;return(t=this.options.current).onUnmount?.call(t,...e)}})}getEditor(){return this.editor}getServerSnapshot(){return null}subscribe(e){return this.subscriptions.add(e),()=>{this.subscriptions.delete(e)}}static compareOptions(e,t){return Object.keys(e).every(n=>[`onCreate`,`onBeforeCreate`,`onDestroy`,`onUpdate`,`onTransaction`,`onFocus`,`onBlur`,`onSelectionUpdate`,`onContentError`,`onDrop`,`onPaste`].includes(n)?!0:n===`extensions`&&e.extensions&&t.extensions?e.extensions.length===t.extensions.length?e.extensions.every((e,n)=>e===t.extensions?.[n]):!1:e[n]===t[n])}onRender(t){return()=>(this.isComponentMounted=!0,clearTimeout(this.scheduledDestructionTimeout),this.editor&&!this.editor.isDestroyed&&t.length===0?e.compareOptions(this.options.current,this.editor.options)||this.editor.setOptions({...this.options.current,editable:this.editor.isEditable}):this.refreshEditorInstance(t),()=>{this.isComponentMounted=!1,this.scheduleDestroy()})}refreshEditorInstance(e){if(this.editor&&!this.editor.isDestroyed){if(this.previousDeps===null){this.previousDeps=e;return}if(this.previousDeps.length===e.length&&this.previousDeps.every((t,n)=>t===e[n]))return}this.editor&&!this.editor.isDestroyed&&this.editor.destroy(),this.setEditor(this.createEditor()),this.previousDeps=e}scheduleDestroy(){let e=this.instanceId,t=this.editor;this.scheduledDestructionTimeout=setTimeout(()=>{if(this.isComponentMounted&&this.instanceId===e){t&&t.setOptions(this.options.current);return}t&&!t.isDestroyed&&(t.destroy(),this.instanceId===e&&this.setEditor(null))},1)}};function LLe(e={},t=[]){let n=(0,y.useRef)(e);n.current=e;let[r]=(0,y.useState)(()=>new ILe(n)),i=(0,Qe.useSyncExternalStore)(r.subscribe,r.getEditor,r.getServerSnapshot);return(0,y.useDebugValue)(i),(0,y.useEffect)(r.onRender(t)),PLe({editor:i,selector:({transactionNumber:t})=>e.shouldRerenderOnTransaction===!1||e.shouldRerenderOnTransaction===void 0?null:e.immediatelyRender&&t===0?0:t+1}),i}var M1=(0,y.createContext)({editor:null});M1.Consumer;var RLe=(0,y.createContext)({onDragStart:()=>{},nodeViewContentChildren:void 0,nodeViewContentRef:()=>{}}),zLe=()=>(0,y.useContext)(RLe);y.forwardRef((e,t)=>{let{onDragStart:n}=zLe();return(0,G.jsx)(e.as||`div`,{...e,ref:t,"data-node-view-wrapper":``,onDragStart:n,style:{whiteSpace:`normal`,...e.style}})}),y.createContext({markViewContentRef:()=>{}});var N1=(0,y.createContext)({get editor(){throw Error(`useTiptap must be used within a <Tiptap> provider`)}});N1.displayName=`TiptapContext`;var BLe=()=>(0,y.useContext)(N1);function P1({children:e,...t}){let n=`editor`in t?t.editor:t.instance;if(!n)throw Error("Tiptap: An editor instance is required. Pass a non-null `editor` prop.");let r=(0,y.useMemo)(()=>({editor:n}),[n]),i=(0,y.useMemo)(()=>({editor:n}),[n]);return(0,G.jsx)(M1.Provider,{value:i,children:(0,G.jsx)(N1.Provider,{value:r,children:e})})}P1.displayName=`Tiptap`;function F1({...e}){let{editor:t}=BLe();return(0,G.jsx)(A1,{editor:t,...e})}F1.displayName=`Tiptap.Content`,Object.assign(P1,{Content:F1});var I1=new WeakSet,L1=new WeakSet;function R1(e){let t=e;return I1.add(t),t}function z1(e){return Array.isArray(e)&&I1.has(e)}function B1(e){return e.flatMap(e=>e==null?[]:Array.isArray(e)&&L1.has(e)&&!z1(e)?B1(e):[e])}function VLe(e,t){if(e===`slot`)return 0;if(e instanceof Function){let n=e(t);return Array.isArray(n)&&!z1(n)&&!L1.has(n)?R1(n):n}let{children:n,...r}=t??{};if(e===`svg`)throw Error(`SVG elements are not supported in the JSX syntax, use the array syntax instead`);if(Array.isArray(n)){if(z1(n))return R1([e,r,n]);if(n.length===0)return R1([e,r]);let t=B1(n);return t.length===0?R1([e,r]):R1([e,r,...t])}return R1(n==null?[e,r]:[e,r,n])}var V1=(e,t)=>VLe(e,t),HLe=(e,t)=>{let{state:n}=e,{selection:r}=n;if(!r.empty)return!1;let{$from:i}=r;if(i.parentOffset!==0)return!1;let a=i.depth-1;if(a<0)return!1;let o=i.node(a),s=i.index(a);if(s===0)return!1;if(o.type===t)return e.commands.lift(t.name);let c=o.child(s-1);if(c.type!==t||!c.lastChild?.isTextblock)return!1;let l=i.before()-1-1;return e.commands.command(({tr:e,dispatch:t})=>{if(!t)return!0;let n=i.parent.content,r=new fq(n,0,0);return e.replace(l,i.after(),r),e.setSelection(ZJ.create(e.doc,l+n.size)),e.scrollIntoView(),t(e),!0})},ULe=/^\s*>\s$/,WLe=g1.create({name:`blockquote`,addOptions(){return{HTMLAttributes:{}}},content:`block+`,group:`block`,defining:!0,parseHTML(){return[{tag:`blockquote`}]},renderHTML({HTMLAttributes:e}){return V1(`blockquote`,{...h$(this.options.HTMLAttributes,e),children:V1(`slot`,{})})},parseMarkdown:(e,t)=>{let n=t.parseBlockChildren??t.parseChildren;return t.createNode(`blockquote`,void 0,n(e.tokens||[]))},renderMarkdown:(e,t)=>{if(!e.content)return``;let n=[];return e.content.forEach((e,r)=>{let i=(t.renderChild?.call(t,e,r)??t.renderChildren([e])).split(`
+`,textSerializers:n={}}=e||{};return vFe(this.state.doc,{blockSeparator:t,textSerializers:{...E$(this.schema),...n}})}get isEmpty(){return F$(this.state.doc)}destroy(){this.destroyed||(this.destroyed=!0,this.emit(`destroy`),this.unmount(),this.removeAllListeners(),this.extensionManager.destroy(),this.extensionManager=null,this.schema=null,this.commandManager=null,this.extensionStorage={})}get isDestroyed(){return this.editorView?.isDestroyed??!0}$node(e,t){return this.$doc?.querySelector(e,t)||null}$nodes(e,t){return this.$doc?.querySelectorAll(e,t)||null}$pos(e){let t=this.state.doc.resolve(e),n=e>0&&t.nodeAfter&&!t.nodeAfter.isText&&t.nodeAfter.isAtom?t.nodeAfter:null;return new RIe(t,this,!1,n)}get $doc(){return this.$pos(0)}};function h1(e){return new o1({find:e.find,handler:({state:t,range:n,match:r})=>{let i=m$(e.getAttributes,void 0,r);if(i===!1||i===null)return null;let{tr:a}=t,o=r[r.length-1],s=r[0];if(o){let r=s.search(/\S/),c=n.from+s.indexOf(o),l=c+o.length;if(k$(n.from,n.to,t.doc).filter(t=>t.mark.type.excluded.find(n=>n===e.type&&n!==t.mark.type)).filter(e=>e.to>c).length)return null;l<n.to&&a.delete(l,n.to),c>n.from&&a.delete(n.from+r,c);let u=n.from+r+o.length;a.addMark(n.from+r,u,e.type.create(i||{})),a.removeStoredMark(e.type)}},undoable:e.undoable})}function g1(e){return new o1({find:e.find,handler:({state:t,range:n,match:r})=>{let i=m$(e.getAttributes,void 0,r)||{},{tr:a}=t,o=n.from,s=n.to,c=e.type.create(i);if(r[1]){let e=o+r[0].lastIndexOf(r[1]);e>s?e=s:s=e+r[1].length;let t=r[0][r[0].length-1];a.insertText(t,o+r[0].length-1),a.replaceWith(e,s,c)}else if(r[0]){let t=e.type.isInline?o:o-1;a.insert(t,e.type.create(i)).delete(a.mapping.map(o),a.mapping.map(s))}a.scrollIntoView()},undoable:e.undoable})}function _1(e){return new o1({find:e.find,handler:({state:t,range:n,match:r})=>{let i=t.doc.resolve(n.from),a=m$(e.getAttributes,void 0,r)||{};if(!i.node(-1).canReplaceWith(i.index(-1),i.indexAfter(-1),e.type))return null;t.tr.delete(n.from,n.to).setBlockType(n.from,n.from,e.type,a)},undoable:e.undoable})}function v1(e){return new o1({find:e.find,handler:({state:t,range:n,match:r,chain:i})=>{let a=m$(e.getAttributes,void 0,r)||{},o=t.tr.delete(n.from,n.to),s=o.doc.resolve(n.from).blockRange(),c=s&&DJ(s,e.type,a);if(!c)return null;if(o.wrap(s,c),e.keepMarks&&e.editor){let{selection:n,storedMarks:r}=t,{splittableMarks:i}=e.editor.extensionManager,a=r||n.$to.parentOffset&&n.$from.marks();if(a){let e=a.filter(e=>i.includes(e.type.name));o.ensureMarks(e)}}if(e.keepAttributes){let t=e.type.name===`bulletList`||e.type.name===`orderedList`?`listItem`:`taskList`;i().updateAttributes(t,a).run()}let l=o.doc.resolve(n.from-1).nodeBefore;l&&l.type===e.type&&MJ(o.doc,n.from-1)&&(!e.joinPredicate||e.joinPredicate(r,l))&&o.join(n.from-1)},undoable:e.undoable})}var VIe=e=>`touches`in e,HIe=class{constructor(e){var t;this.directions=[`bottom-left`,`bottom-right`,`top-left`,`top-right`],this.minSize={height:8,width:8},this.preserveAspectRatio=!1,this.classNames={container:``,wrapper:``,handle:``,resizing:``},this.initialWidth=0,this.initialHeight=0,this.aspectRatio=1,this.isResizing=!1,this.activeHandle=null,this.startX=0,this.startY=0,this.startWidth=0,this.startHeight=0,this.isShiftKeyPressed=!1,this.lastEditableState=void 0,this.handleMap=new Map,this.handleMouseMove=e=>{if(!this.isResizing||!this.activeHandle)return;let t=e.clientX-this.startX,n=e.clientY-this.startY;this.handleResize(t,n)},this.handleTouchMove=e=>{if(!this.isResizing||!this.activeHandle)return;let t=e.touches[0];if(!t)return;let n=t.clientX-this.startX,r=t.clientY-this.startY;this.handleResize(n,r)},this.handleMouseUp=()=>{if(!this.isResizing)return;let e=this.element.offsetWidth,t=this.element.offsetHeight;this.onCommit(e,t),this.isResizing=!1,this.activeHandle=null,this.container.dataset.resizeState=`false`,this.classNames.resizing&&this.container.classList.remove(this.classNames.resizing),document.removeEventListener(`mousemove`,this.handleMouseMove),document.removeEventListener(`mouseup`,this.handleMouseUp),document.removeEventListener(`keydown`,this.handleKeyDown),document.removeEventListener(`keyup`,this.handleKeyUp)},this.handleKeyDown=e=>{e.key===`Shift`&&(this.isShiftKeyPressed=!0)},this.handleKeyUp=e=>{e.key===`Shift`&&(this.isShiftKeyPressed=!1)},this.node=e.node,this.editor=e.editor,this.element=e.element,this.element.draggable=!1,this.contentElement=e.contentElement,this.getPos=e.getPos,this.onResize=e.onResize,this.onCommit=e.onCommit,this.onUpdate=e.onUpdate,e.options?.min&&(this.minSize={...this.minSize,...e.options.min}),e.options?.max&&(this.maxSize=e.options.max),!(e==null||(t=e.options)==null)&&t.directions&&(this.directions=e.options.directions),e.options?.preserveAspectRatio&&(this.preserveAspectRatio=e.options.preserveAspectRatio),e.options?.className&&(this.classNames={container:e.options.className.container||``,wrapper:e.options.className.wrapper||``,handle:e.options.className.handle||``,resizing:e.options.className.resizing||``}),e.options?.createCustomHandle&&(this.createCustomHandle=e.options.createCustomHandle),this.wrapper=this.createWrapper(),this.container=this.createContainer(),this.applyInitialSize(),this.attachHandles(),this.editor.on(`update`,this.handleEditorUpdate.bind(this))}get dom(){return this.container}get contentDOM(){return this.contentElement??null}handleEditorUpdate(){let e=this.editor.isEditable;e!==this.lastEditableState&&(this.lastEditableState=e,e?e&&this.handleMap.size===0&&this.attachHandles():this.removeHandles())}update(e,t,n){return e.type===this.node.type?(this.node=e,this.onUpdate?this.onUpdate(e,t,n):!0):!1}destroy(){this.isResizing&&(this.container.dataset.resizeState=`false`,this.classNames.resizing&&this.container.classList.remove(this.classNames.resizing),document.removeEventListener(`mousemove`,this.handleMouseMove),document.removeEventListener(`mouseup`,this.handleMouseUp),document.removeEventListener(`keydown`,this.handleKeyDown),document.removeEventListener(`keyup`,this.handleKeyUp),this.isResizing=!1,this.activeHandle=null),this.editor.off(`update`,this.handleEditorUpdate.bind(this)),this.container.remove()}createContainer(){let e=document.createElement(`div`);return e.dataset.resizeContainer=``,e.dataset.node=this.node.type.name,e.style.display=this.node.type.isInline?`inline-flex`:`flex`,this.classNames.container&&(e.className=this.classNames.container),e.appendChild(this.wrapper),e}createWrapper(){let e=document.createElement(`div`);return e.style.position=`relative`,e.style.display=`block`,e.dataset.resizeWrapper=``,this.classNames.wrapper&&(e.className=this.classNames.wrapper),e.appendChild(this.element),e}createHandle(e){let t=document.createElement(`div`);return t.dataset.resizeHandle=e,t.style.position=`absolute`,this.classNames.handle&&(t.className=this.classNames.handle),t}positionHandle(e,t){let n=t.includes(`top`),r=t.includes(`bottom`),i=t.includes(`left`),a=t.includes(`right`);n&&(e.style.top=`0`),r&&(e.style.bottom=`0`),i&&(e.style.left=`0`),a&&(e.style.right=`0`),(t===`top`||t===`bottom`)&&(e.style.left=`0`,e.style.right=`0`),(t===`left`||t===`right`)&&(e.style.top=`0`,e.style.bottom=`0`)}attachHandles(){this.directions.forEach(e=>{let t;t=this.createCustomHandle?this.createCustomHandle(e):this.createHandle(e),t instanceof HTMLElement||(console.warn(`[ResizableNodeView] createCustomHandle("${e}") did not return an HTMLElement. Falling back to default handle.`),t=this.createHandle(e)),this.createCustomHandle||this.positionHandle(t,e),t.addEventListener(`mousedown`,t=>this.handleResizeStart(t,e)),t.addEventListener(`touchstart`,t=>this.handleResizeStart(t,e)),this.handleMap.set(e,t),this.wrapper.appendChild(t)})}removeHandles(){this.handleMap.forEach(e=>e.remove()),this.handleMap.clear()}applyInitialSize(){let e=this.node.attrs.width,t=this.node.attrs.height;e?(this.element.style.width=`${e}px`,this.initialWidth=e):this.initialWidth=this.element.offsetWidth,t?(this.element.style.height=`${t}px`,this.initialHeight=t):this.initialHeight=this.element.offsetHeight,this.initialWidth>0&&this.initialHeight>0&&(this.aspectRatio=this.initialWidth/this.initialHeight)}handleResizeStart(e,t){e.preventDefault(),e.stopPropagation(),this.isResizing=!0,this.activeHandle=t,VIe(e)?(this.startX=e.touches[0].clientX,this.startY=e.touches[0].clientY):(this.startX=e.clientX,this.startY=e.clientY),this.startWidth=this.element.offsetWidth,this.startHeight=this.element.offsetHeight,this.startWidth>0&&this.startHeight>0&&(this.aspectRatio=this.startWidth/this.startHeight),this.getPos(),this.container.dataset.resizeState=`true`,this.classNames.resizing&&this.container.classList.add(this.classNames.resizing),document.addEventListener(`mousemove`,this.handleMouseMove),document.addEventListener(`touchmove`,this.handleTouchMove),document.addEventListener(`mouseup`,this.handleMouseUp),document.addEventListener(`keydown`,this.handleKeyDown),document.addEventListener(`keyup`,this.handleKeyUp)}handleResize(e,t){if(!this.activeHandle)return;let n=this.preserveAspectRatio||this.isShiftKeyPressed,{width:r,height:i}=this.calculateNewDimensions(this.activeHandle,e,t),a=this.applyConstraints(r,i,n);this.element.style.width=`${a.width}px`,this.element.style.height=`${a.height}px`,this.onResize&&this.onResize(a.width,a.height)}calculateNewDimensions(e,t,n){let r=this.startWidth,i=this.startHeight,a=e.includes(`right`),o=e.includes(`left`),s=e.includes(`bottom`),c=e.includes(`top`);return a?r=this.startWidth+t:o&&(r=this.startWidth-t),s?i=this.startHeight+n:c&&(i=this.startHeight-n),(e===`right`||e===`left`)&&(r=this.startWidth+(a?t:-t)),(e===`top`||e===`bottom`)&&(i=this.startHeight+(s?n:-n)),this.preserveAspectRatio||this.isShiftKeyPressed?this.applyAspectRatio(r,i,e):{width:r,height:i}}applyConstraints(e,t,n){if(!n){let n=Math.max(this.minSize.width,e),r=Math.max(this.minSize.height,t);return this.maxSize?.width&&(n=Math.min(this.maxSize.width,n)),this.maxSize?.height&&(r=Math.min(this.maxSize.height,r)),{width:n,height:r}}let r=e,i=t;return r<this.minSize.width&&(r=this.minSize.width,i=r/this.aspectRatio),i<this.minSize.height&&(i=this.minSize.height,r=i*this.aspectRatio),this.maxSize?.width&&r>this.maxSize.width&&(r=this.maxSize.width,i=r/this.aspectRatio),this.maxSize?.height&&i>this.maxSize.height&&(i=this.maxSize.height,r=i*this.aspectRatio),{width:r,height:i}}applyAspectRatio(e,t,n){return n===`left`||n===`right`?{width:e,height:e/this.aspectRatio}:n===`top`||n===`bottom`?{width:t*this.aspectRatio,height:t}:{width:e,height:e/this.aspectRatio}}},y1=class e extends c1{constructor(...e){super(...e),this.type=`node`}static create(t={}){return new e(typeof t==`function`?t():t)}configure(e){return super.configure(e)}extend(e){let t=typeof e==`function`?e():e;return super.extend(t)}};function b1(e){return new u1({find:e.find,handler:({state:t,range:n,match:r,pasteEvent:i})=>{let a=m$(e.getAttributes,void 0,r,i);if(a===!1||a===null)return null;let{tr:o}=t,s=r[r.length-1],c=r[0],l=n.to;if(s){let i=c.search(/\S/),u=n.from+c.indexOf(s),d=u+s.length;if(k$(n.from,n.to,t.doc).filter(t=>t.mark.type.excluded.find(n=>n===e.type&&n!==t.mark.type)).filter(e=>e.to>u).length)return null;d<n.to&&o.delete(d,n.to),u>n.from&&o.delete(n.from+i,u),l=n.from+i+s.length,o.addMark(n.from+i,l,e.type.create(a||{})),r.index!==void 0&&r.input!==void 0&&r.index+r[0].length>=r.input.length||o.removeStoredMark(e.type)}}})}var{getOwnPropertyNames:UIe,getOwnPropertySymbols:WIe}=Object,{hasOwnProperty:GIe}=Object.prototype;function x1(e,t){return function(n,r,i){return e(n,r,i)&&t(n,r,i)}}function S1(e){return function(t,n,r){if(!t||!n||typeof t!=`object`||typeof n!=`object`)return e(t,n,r);let{cache:i}=r,a=i.get(t),o=i.get(n);if(a&&o)return a===n&&o===t;i.set(t,n),i.set(n,t);let s=e(t,n,r);return i.delete(t),i.delete(n),s}}function KIe(e){return e?.[Symbol.toStringTag]}function C1(e){return UIe(e).concat(WIe(e))}var qIe=Object.hasOwn||((e,t)=>GIe.call(e,t));function w1(e,t){return e===t||!e&&!t&&e!==e&&t!==t}var JIe=`__v`,YIe=`__o`,XIe=`_owner`,{getOwnPropertyDescriptor:T1,keys:E1}=Object;function ZIe(e,t){return e.byteLength===t.byteLength&&A1(new Uint8Array(e),new Uint8Array(t))}function QIe(e,t,n){let r=e.length;if(t.length!==r)return!1;for(;r-- >0;)if(!n.equals(e[r],t[r],r,r,e,t,n))return!1;return!0}function $Ie(e,t){return e.byteLength===t.byteLength&&A1(new Uint8Array(e.buffer,e.byteOffset,e.byteLength),new Uint8Array(t.buffer,t.byteOffset,t.byteLength))}function eLe(e,t){return w1(e.getTime(),t.getTime())}function tLe(e,t){return e.name===t.name&&e.message===t.message&&e.cause===t.cause&&e.stack===t.stack}function nLe(e,t){return e===t}function D1(e,t,n){let r=e.size;if(r!==t.size)return!1;if(!r)return!0;let i=Array(r),a=e.entries(),o,s,c=0;for(;(o=a.next())&&!o.done;){let r=t.entries(),a=!1,l=0;for(;(s=r.next())&&!s.done;){if(i[l]){l++;continue}let r=o.value,u=s.value;if(n.equals(r[0],u[0],c,l,e,t,n)&&n.equals(r[1],u[1],r[0],u[0],e,t,n)){a=i[l]=!0;break}l++}if(!a)return!1;c++}return!0}var rLe=w1;function iLe(e,t,n){let r=E1(e),i=r.length;if(E1(t).length!==i)return!1;for(;i-- >0;)if(!j1(e,t,n,r[i]))return!1;return!0}function O1(e,t,n){let r=C1(e),i=r.length;if(C1(t).length!==i)return!1;let a,o,s;for(;i-- >0;)if(a=r[i],!j1(e,t,n,a)||(o=T1(e,a),s=T1(t,a),(o||s)&&(!o||!s||o.configurable!==s.configurable||o.enumerable!==s.enumerable||o.writable!==s.writable)))return!1;return!0}function aLe(e,t){return w1(e.valueOf(),t.valueOf())}function oLe(e,t){return e.source===t.source&&e.flags===t.flags}function k1(e,t,n){let r=e.size;if(r!==t.size)return!1;if(!r)return!0;let i=Array(r),a=e.values(),o,s;for(;(o=a.next())&&!o.done;){let r=t.values(),a=!1,c=0;for(;(s=r.next())&&!s.done;){if(!i[c]&&n.equals(o.value,s.value,o.value,s.value,e,t,n)){a=i[c]=!0;break}c++}if(!a)return!1}return!0}function A1(e,t){let n=e.byteLength;if(t.byteLength!==n||e.byteOffset!==t.byteOffset)return!1;for(;n-- >0;)if(e[n]!==t[n])return!1;return!0}function sLe(e,t){return e.hostname===t.hostname&&e.pathname===t.pathname&&e.protocol===t.protocol&&e.port===t.port&&e.hash===t.hash&&e.username===t.username&&e.password===t.password}function j1(e,t,n,r){return(r===XIe||r===YIe||r===JIe)&&(e.$$typeof||t.$$typeof)?!0:qIe(t,r)&&n.equals(e[r],t[r],r,r,e,t,n)}var cLe=`[object ArrayBuffer]`,lLe=`[object Arguments]`,uLe=`[object Boolean]`,dLe=`[object DataView]`,fLe=`[object Date]`,pLe=`[object Error]`,mLe=`[object Map]`,hLe=`[object Number]`,gLe=`[object Object]`,_Le=`[object RegExp]`,vLe=`[object Set]`,yLe=`[object String]`,bLe={"[object Int8Array]":!0,"[object Uint8Array]":!0,"[object Uint8ClampedArray]":!0,"[object Int16Array]":!0,"[object Uint16Array]":!0,"[object Int32Array]":!0,"[object Uint32Array]":!0,"[object Float16Array]":!0,"[object Float32Array]":!0,"[object Float64Array]":!0,"[object BigInt64Array]":!0,"[object BigUint64Array]":!0},xLe=`[object URL]`,SLe=Object.prototype.toString;function CLe({areArrayBuffersEqual:e,areArraysEqual:t,areDataViewsEqual:n,areDatesEqual:r,areErrorsEqual:i,areFunctionsEqual:a,areMapsEqual:o,areNumbersEqual:s,areObjectsEqual:c,arePrimitiveWrappersEqual:l,areRegExpsEqual:u,areSetsEqual:d,areTypedArraysEqual:f,areUrlsEqual:p,unknownTagComparators:m}){return function(h,g,_){if(h===g)return!0;if(h==null||g==null)return!1;let v=typeof h;if(v!==typeof g)return!1;if(v!==`object`)return v===`number`?s(h,g,_):v===`function`?a(h,g,_):!1;let y=h.constructor;if(y!==g.constructor)return!1;if(y===Object)return c(h,g,_);if(Array.isArray(h))return t(h,g,_);if(y===Date)return r(h,g,_);if(y===RegExp)return u(h,g,_);if(y===Map)return o(h,g,_);if(y===Set)return d(h,g,_);let b=SLe.call(h);if(b===fLe)return r(h,g,_);if(b===_Le)return u(h,g,_);if(b===mLe)return o(h,g,_);if(b===vLe)return d(h,g,_);if(b===gLe)return typeof h.then!=`function`&&typeof g.then!=`function`&&c(h,g,_);if(b===xLe)return p(h,g,_);if(b===pLe)return i(h,g,_);if(b===lLe)return c(h,g,_);if(bLe[b])return f(h,g,_);if(b===cLe)return e(h,g,_);if(b===dLe)return n(h,g,_);if(b===uLe||b===hLe||b===yLe)return l(h,g,_);if(m){let e=m[b];if(!e){let t=KIe(h);t&&(e=m[t])}if(e)return e(h,g,_)}return!1}}function wLe({circular:e,createCustomConfig:t,strict:n}){let r={areArrayBuffersEqual:ZIe,areArraysEqual:n?O1:QIe,areDataViewsEqual:$Ie,areDatesEqual:eLe,areErrorsEqual:tLe,areFunctionsEqual:nLe,areMapsEqual:n?x1(D1,O1):D1,areNumbersEqual:rLe,areObjectsEqual:n?O1:iLe,arePrimitiveWrappersEqual:aLe,areRegExpsEqual:oLe,areSetsEqual:n?x1(k1,O1):k1,areTypedArraysEqual:n?x1(A1,O1):A1,areUrlsEqual:sLe,unknownTagComparators:void 0};if(t&&(r=Object.assign({},r,t(r))),e){let e=S1(r.areArraysEqual),t=S1(r.areMapsEqual),n=S1(r.areObjectsEqual),i=S1(r.areSetsEqual);r=Object.assign({},r,{areArraysEqual:e,areMapsEqual:t,areObjectsEqual:n,areSetsEqual:i})}return r}function TLe(e){return function(t,n,r,i,a,o,s){return e(t,n,s)}}function ELe({circular:e,comparator:t,createState:n,equals:r,strict:i}){if(n)return function(a,o){let{cache:s=e?new WeakMap:void 0,meta:c}=n();return t(a,o,{cache:s,equals:r,meta:c,strict:i})};if(e)return function(e,n){return t(e,n,{cache:new WeakMap,equals:r,meta:void 0,strict:i})};let a={cache:void 0,equals:r,meta:void 0,strict:i};return function(e,n){return t(e,n,a)}}var DLe=M1();M1({strict:!0}),M1({circular:!0}),M1({circular:!0,strict:!0}),M1({createInternalComparator:()=>w1}),M1({strict:!0,createInternalComparator:()=>w1}),M1({circular:!0,createInternalComparator:()=>w1}),M1({circular:!0,createInternalComparator:()=>w1,strict:!0});function M1(e={}){let{circular:t=!1,createInternalComparator:n,createState:r,strict:i=!1}=e,a=CLe(wLe(e));return ELe({circular:t,comparator:a,createState:r,equals:n?n(a):TLe(a),strict:i})}var OLe=(...e)=>t=>{e.forEach(e=>{typeof e==`function`?e(t):e&&(e.current=t)})},kLe=({contentComponent:e})=>{let t=(0,Qe.useSyncExternalStore)(e.subscribe,e.getSnapshot,e.getServerSnapshot);return(0,G.jsx)(G.Fragment,{children:Object.values(t)})};function ALe(){let e=new Set,t={},n=!1,r=()=>{n||!e.size||(n=!0,queueMicrotask(()=>{n=!1,e.forEach(e=>e())}))};return{subscribe(t){return e.add(t),()=>{e.delete(t)}},getSnapshot(){return t},getServerSnapshot(){return t},setRenderer(e,n){t={...t,[e]:At.createPortal(n.reactElement,n.element,e)},r()},removeRenderer(e){let n={...t};delete n[e],t=n,r()}}}var jLe=class extends y.Component{constructor(e){super(e),this.editorContentRef=y.createRef()}componentDidMount(){this.init()}componentDidUpdate(){this.init()}init(){let e=this.props.editor;if(e&&!e.isDestroyed&&e.view.dom?.parentNode){if(e.contentComponent)return;let t=this.editorContentRef.current;t.append(...e.view.dom.parentNode.childNodes),e.setOptions({element:t}),e.contentComponent=ALe(),e.createNodeViews(),e.isEditorContentInitialized=!0,this.forceUpdate()}}componentWillUnmount(){let e=this.props.editor;if(e){e.isEditorContentInitialized=!1,e.isDestroyed||e.view.setProps({nodeViews:{}}),e.contentComponent=null;try{if(!e.view.dom?.parentNode)return;let t=document.createElement(`div`);t.append(...e.view.dom.parentNode.childNodes),e.setOptions({element:t})}catch{}}}render(){let{editor:e,innerRef:t,...n}=this.props;return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{ref:OLe(t,this.editorContentRef),...n}),e?.contentComponent&&(0,G.jsx)(kLe,{contentComponent:e.contentComponent})]})}},MLe=(0,y.forwardRef)((e,t)=>{let n=y.useMemo(()=>Math.floor(Math.random()*4294967295).toString(),[e.editor]);return y.createElement(jLe,{key:n,innerRef:t,...e})}),N1=y.memo(MLe),NLe=typeof window<`u`?y.useLayoutEffect:y.useEffect,PLe=class{constructor(e){this.transactionNumber=0,this.lastTransactionNumber=0,this.subscribers=new Set,this.editor=e,this.lastSnapshot={editor:e,transactionNumber:0},this.getSnapshot=this.getSnapshot.bind(this),this.getServerSnapshot=this.getServerSnapshot.bind(this),this.watch=this.watch.bind(this),this.subscribe=this.subscribe.bind(this)}getSnapshot(){return this.transactionNumber===this.lastTransactionNumber?this.lastSnapshot:(this.lastTransactionNumber=this.transactionNumber,this.lastSnapshot={editor:this.editor,transactionNumber:this.transactionNumber},this.lastSnapshot)}getServerSnapshot(){return{editor:null,transactionNumber:0}}subscribe(e){return this.subscribers.add(e),()=>{this.subscribers.delete(e)}}watch(e){if(this.editor=e,this.editor){let e,t=t=>{t?.transaction!==void 0&&t.transaction===e||(e=t?.transaction,this.transactionNumber+=1,this.subscribers.forEach(e=>e()))},n=this.editor;return n.on(`transaction`,t),n.on(`update`,t),()=>{n.off(`transaction`,t),n.off(`update`,t)}}}};function FLe(e){let[t]=(0,y.useState)(()=>new PLe(e.editor)),n=(0,zD.useSyncExternalStoreWithSelector)(t.subscribe,t.getSnapshot,t.getServerSnapshot,e.selector,e.equalityFn??DLe);return NLe(()=>t.watch(e.editor),[e.editor,t]),(0,y.useDebugValue)(n),n}var P1=typeof window>`u`,ILe=P1||!!(typeof window<`u`&&window.next),LLe=class e{constructor(e){this.editor=null,this.subscriptions=new Set,this.isComponentMounted=!1,this.previousDeps=null,this.instanceId=``,this.options=e,this.subscriptions=new Set,this.setEditor(this.getInitialEditor()),this.scheduleDestroy(),this.getEditor=this.getEditor.bind(this),this.getServerSnapshot=this.getServerSnapshot.bind(this),this.subscribe=this.subscribe.bind(this),this.refreshEditorInstance=this.refreshEditorInstance.bind(this),this.scheduleDestroy=this.scheduleDestroy.bind(this),this.onRender=this.onRender.bind(this),this.createEditor=this.createEditor.bind(this)}setEditor(e){this.editor=e,this.instanceId=Math.random().toString(36).slice(2,9),this.subscriptions.forEach(e=>e())}getInitialEditor(){let e=this.options.current.immediatelyRender,t=e??!0;return(P1||ILe&&e===void 0)&&(t=!1),t?this.createEditor():null}createEditor(){return new BIe({...this.options.current,onBeforeCreate:(...e)=>{var t;return(t=this.options.current).onBeforeCreate?.call(t,...e)},onBlur:(...e)=>{var t;return(t=this.options.current).onBlur?.call(t,...e)},onCreate:(...e)=>{var t;return(t=this.options.current).onCreate?.call(t,...e)},onDestroy:(...e)=>{var t;return(t=this.options.current).onDestroy?.call(t,...e)},onFocus:(...e)=>{var t;return(t=this.options.current).onFocus?.call(t,...e)},onSelectionUpdate:(...e)=>{var t;return(t=this.options.current).onSelectionUpdate?.call(t,...e)},onTransaction:(...e)=>{var t;return(t=this.options.current).onTransaction?.call(t,...e)},onUpdate:(...e)=>{var t;return(t=this.options.current).onUpdate?.call(t,...e)},onContentError:(...e)=>{var t;return(t=this.options.current).onContentError?.call(t,...e)},onDrop:(...e)=>{var t;return(t=this.options.current).onDrop?.call(t,...e)},onPaste:(...e)=>{var t;return(t=this.options.current).onPaste?.call(t,...e)},onDelete:(...e)=>{var t;return(t=this.options.current).onDelete?.call(t,...e)},onMount:(...e)=>{var t;return(t=this.options.current).onMount?.call(t,...e)},onUnmount:(...e)=>{var t;return(t=this.options.current).onUnmount?.call(t,...e)}})}getEditor(){return this.editor}getServerSnapshot(){return null}subscribe(e){return this.subscriptions.add(e),()=>{this.subscriptions.delete(e)}}static compareOptions(e,t){return Object.keys(e).every(n=>[`onCreate`,`onBeforeCreate`,`onDestroy`,`onUpdate`,`onTransaction`,`onFocus`,`onBlur`,`onSelectionUpdate`,`onContentError`,`onDrop`,`onPaste`].includes(n)?!0:n===`extensions`&&e.extensions&&t.extensions?e.extensions.length===t.extensions.length?e.extensions.every((e,n)=>e===t.extensions?.[n]):!1:e[n]===t[n])}onRender(t){return()=>(this.isComponentMounted=!0,clearTimeout(this.scheduledDestructionTimeout),this.editor&&!this.editor.isDestroyed&&t.length===0?e.compareOptions(this.options.current,this.editor.options)||this.editor.setOptions({...this.options.current,editable:this.editor.isEditable}):this.refreshEditorInstance(t),()=>{this.isComponentMounted=!1,this.scheduleDestroy()})}refreshEditorInstance(e){if(this.editor&&!this.editor.isDestroyed){if(this.previousDeps===null){this.previousDeps=e;return}if(this.previousDeps.length===e.length&&this.previousDeps.every((t,n)=>t===e[n]))return}this.editor&&!this.editor.isDestroyed&&this.editor.destroy(),this.setEditor(this.createEditor()),this.previousDeps=e}scheduleDestroy(){let e=this.instanceId,t=this.editor;this.scheduledDestructionTimeout=setTimeout(()=>{if(this.isComponentMounted&&this.instanceId===e){t&&t.setOptions(this.options.current);return}t&&!t.isDestroyed&&(t.destroy(),this.instanceId===e&&this.setEditor(null))},1)}};function RLe(e={},t=[]){let n=(0,y.useRef)(e);n.current=e;let[r]=(0,y.useState)(()=>new LLe(n)),i=(0,Qe.useSyncExternalStore)(r.subscribe,r.getEditor,r.getServerSnapshot);return(0,y.useDebugValue)(i),(0,y.useEffect)(r.onRender(t)),FLe({editor:i,selector:({transactionNumber:t})=>e.shouldRerenderOnTransaction===!1||e.shouldRerenderOnTransaction===void 0?null:e.immediatelyRender&&t===0?0:t+1}),i}var F1=(0,y.createContext)({editor:null});F1.Consumer;var zLe=(0,y.createContext)({onDragStart:()=>{},nodeViewContentChildren:void 0,nodeViewContentRef:()=>{}}),BLe=()=>(0,y.useContext)(zLe);y.forwardRef((e,t)=>{let{onDragStart:n}=BLe();return(0,G.jsx)(e.as||`div`,{...e,ref:t,"data-node-view-wrapper":``,onDragStart:n,style:{whiteSpace:`normal`,...e.style}})}),y.createContext({markViewContentRef:()=>{}});var I1=(0,y.createContext)({get editor(){throw Error(`useTiptap must be used within a <Tiptap> provider`)}});I1.displayName=`TiptapContext`;var VLe=()=>(0,y.useContext)(I1);function L1({children:e,...t}){let n=`editor`in t?t.editor:t.instance;if(!n)throw Error("Tiptap: An editor instance is required. Pass a non-null `editor` prop.");let r=(0,y.useMemo)(()=>({editor:n}),[n]),i=(0,y.useMemo)(()=>({editor:n}),[n]);return(0,G.jsx)(F1.Provider,{value:i,children:(0,G.jsx)(I1.Provider,{value:r,children:e})})}L1.displayName=`Tiptap`;function R1({...e}){let{editor:t}=VLe();return(0,G.jsx)(N1,{editor:t,...e})}R1.displayName=`Tiptap.Content`,Object.assign(L1,{Content:R1});var z1=new WeakSet,B1=new WeakSet;function V1(e){let t=e;return z1.add(t),t}function H1(e){return Array.isArray(e)&&z1.has(e)}function U1(e){return e.flatMap(e=>e==null?[]:Array.isArray(e)&&B1.has(e)&&!H1(e)?U1(e):[e])}function HLe(e,t){if(e===`slot`)return 0;if(e instanceof Function){let n=e(t);return Array.isArray(n)&&!H1(n)&&!B1.has(n)?V1(n):n}let{children:n,...r}=t??{};if(e===`svg`)throw Error(`SVG elements are not supported in the JSX syntax, use the array syntax instead`);if(Array.isArray(n)){if(H1(n))return V1([e,r,n]);if(n.length===0)return V1([e,r]);let t=U1(n);return t.length===0?V1([e,r]):V1([e,r,...t])}return V1(n==null?[e,r]:[e,r,n])}var W1=(e,t)=>HLe(e,t),ULe=(e,t)=>{let{state:n}=e,{selection:r}=n;if(!r.empty)return!1;let{$from:i}=r;if(i.parentOffset!==0)return!1;let a=i.depth-1;if(a<0)return!1;let o=i.node(a),s=i.index(a);if(s===0)return!1;if(o.type===t)return e.commands.lift(t.name);let c=o.child(s-1);if(c.type!==t||!c.lastChild?.isTextblock)return!1;let l=i.before()-1-1;return e.commands.command(({tr:e,dispatch:t})=>{if(!t)return!0;let n=i.parent.content,r=new hq(n,0,0);return e.replace(l,i.after(),r),e.setSelection(eY.create(e.doc,l+n.size)),e.scrollIntoView(),t(e),!0})},WLe=/^\s*>\s$/,GLe=y1.create({name:`blockquote`,addOptions(){return{HTMLAttributes:{}}},content:`block+`,group:`block`,defining:!0,parseHTML(){return[{tag:`blockquote`}]},renderHTML({HTMLAttributes:e}){return W1(`blockquote`,{...v$(this.options.HTMLAttributes,e),children:W1(`slot`,{})})},parseMarkdown:(e,t)=>{let n=t.parseBlockChildren??t.parseChildren;return t.createNode(`blockquote`,void 0,n(e.tokens||[]))},renderMarkdown:(e,t)=>{if(!e.content)return``;let n=[];return e.content.forEach((e,r)=>{let i=(t.renderChild?.call(t,e,r)??t.renderChildren([e])).split(`
 `).map(e=>e.trim()===``?`>`:`> ${e}`);n.push(i.join(`
 `))}),n.join(`
 >
-`)},addCommands(){return{setBlockquote:()=>({commands:e})=>e.wrapIn(this.name),toggleBlockquote:()=>({commands:e})=>e.toggleWrap(this.name),unsetBlockquote:()=>({commands:e})=>e.lift(this.name)}},addKeyboardShortcuts(){return{"Mod-Shift-b":()=>this.editor.commands.toggleBlockquote(),Backspace:()=>HLe(this.editor,this.type)}},addInputRules(){return[h1({find:ULe,type:this.type})]}}),GLe=/(?:^|\s)(\*\*(?!\s+\*\*)((?:[^*]+))\*\*(?!\s+\*\*))$/,KLe=/(?:^|\s)(\*\*(?!\s+\*\*)((?:[^*]+))\*\*(?!\s+\*\*))/g,qLe=/(?:^|\s)(__(?!\s+__)((?:[^_]+))__(?!\s+__))$/,JLe=/(?:^|\s)(__(?!\s+__)((?:[^_]+))__(?!\s+__))/g,YLe=o1.create({name:`bold`,addOptions(){return{HTMLAttributes:{}}},parseHTML(){return[{tag:`strong`},{tag:`b`,getAttrs:e=>e.style.fontWeight!==`normal`&&null},{style:`font-weight=400`,clearMark:e=>e.type.name===this.name},{style:`font-weight`,getAttrs:e=>/^(bold(er)?|[5-9]\d{2,})$/.test(e)&&null}]},renderHTML({HTMLAttributes:e}){return V1(`strong`,{...h$(this.options.HTMLAttributes,e),children:V1(`slot`,{})})},markdownTokenName:`strong`,parseMarkdown:(e,t)=>t.applyMark(`bold`,t.parseInline(e.tokens||[])),markdownOptions:{htmlReopen:{open:`<strong>`,close:`</strong>`}},renderMarkdown:(e,t)=>`**${t.renderChildren(e)}**`,addCommands(){return{setBold:()=>({commands:e})=>e.setMark(this.name),toggleBold:()=>({commands:e})=>e.toggleMark(this.name),unsetBold:()=>({commands:e})=>e.unsetMark(this.name)}},addKeyboardShortcuts(){return{"Mod-b":()=>this.editor.commands.toggleBold(),"Mod-B":()=>this.editor.commands.toggleBold()}},addInputRules(){return[f1({find:GLe,type:this.type}),f1({find:qLe,type:this.type})]},addPasteRules(){return[_1({find:KLe,type:this.type}),_1({find:JLe,type:this.type})]}}),XLe=e=>{let t=/`([^`]+)`(?!`)$/.exec(e);return!t||t.index>0&&e[t.index-1]==="`"?null:{index:t.index,text:t[0],replaceWith:t[1]}},ZLe=e=>{let t=/`([^`]+)`(?!`)/g,n=[],r;for(;(r=t.exec(e))!==null;)r.index>0&&e[r.index-1]==="`"||n.push({index:r.index,text:r[0],replaceWith:r[1]});return n},QLe=o1.create({name:`code`,addOptions(){return{HTMLAttributes:{}}},excludes:`_`,code:!0,exitable:!0,parseHTML(){return[{tag:`code`}]},renderHTML({HTMLAttributes:e}){return[`code`,h$(this.options.HTMLAttributes,e),0]},markdownTokenName:`codespan`,parseMarkdown:(e,t)=>t.applyMark(`code`,[{type:`text`,text:e.text||``}]),renderMarkdown:(e,t)=>e.content?`\`${t.renderChildren(e.content)}\``:``,addCommands(){return{setCode:()=>({commands:e})=>e.setMark(this.name),toggleCode:()=>({commands:e})=>e.toggleMark(this.name),unsetCode:()=>({commands:e})=>e.unsetMark(this.name)}},addKeyboardShortcuts(){return{"Mod-e":()=>this.editor.commands.toggleCode()}},addInputRules(){return[f1({find:XLe,type:this.type})]},addPasteRules(){return[_1({find:ZLe,type:this.type})]}}),H1=4,$Le=/^```([a-z]+)?[\s\n]$/,eRe=/^~~~([a-z]+)?[\s\n]$/,tRe=g1.create({name:`codeBlock`,addOptions(){return{languageClassPrefix:`language-`,exitOnTripleEnter:!0,exitOnArrowDown:!0,exitOnArrowUp:!0,defaultLanguage:null,enableTabIndentation:!1,tabSize:H1,HTMLAttributes:{}}},content:`text*`,marks:``,group:`block`,code:!0,defining:!0,addAttributes(){return{language:{default:this.options.defaultLanguage,parseHTML:e=>{let{languageClassPrefix:t}=this.options;return t&&[...e.firstElementChild?.classList||[]].filter(e=>e.startsWith(t)).map(e=>e.replace(t,``))[0]||null},rendered:!1}}},parseHTML(){return[{tag:`pre`,preserveWhitespace:`full`}]},renderHTML({node:e,HTMLAttributes:t}){return[`pre`,h$(this.options.HTMLAttributes,t),[`code`,{class:e.attrs.language?this.options.languageClassPrefix+e.attrs.language:null},0]]},markdownTokenName:`code`,parseMarkdown:(e,t)=>e.raw?.startsWith("```")===!1&&e.raw?.startsWith(`~~~`)===!1&&e.codeBlockStyle!==`indented`?[]:t.createNode(`codeBlock`,{language:e.lang||null},e.text?[t.createTextNode(e.text)]:[]),renderMarkdown:(e,t)=>{let n=``,r=e.attrs?.language||``;return n=e.content?[`\`\`\`${r}`,t.renderChildren(e.content),"```"].join(`
-`):`\`\`\`${r}\n\n\`\`\``,n},addCommands(){return{setCodeBlock:e=>({commands:t})=>t.setNode(this.name,e),toggleCodeBlock:e=>({commands:t})=>t.toggleNode(this.name,`paragraph`,e)}},addKeyboardShortcuts(){return{"Mod-Alt-c":()=>this.editor.commands.toggleCodeBlock(),Backspace:()=>{let{empty:e,$anchor:t}=this.editor.state.selection,n=t.pos===1;return!e||t.parent.type.name!==this.name?!1:n||!t.parent.textContent.length?this.editor.commands.clearNodes():!1},Tab:({editor:e})=>{if(!this.options.enableTabIndentation)return!1;let t=this.options.tabSize??H1,{state:n}=e,{selection:r}=n,{$from:i,empty:a}=r;if(i.parent.type!==this.type)return!1;let o=` `.repeat(t);return a?e.commands.insertContent(o):e.commands.command(({tr:e})=>{let{from:t,to:i}=r,a=n.doc.textBetween(t,i,`
+`)},addCommands(){return{setBlockquote:()=>({commands:e})=>e.wrapIn(this.name),toggleBlockquote:()=>({commands:e})=>e.toggleWrap(this.name),unsetBlockquote:()=>({commands:e})=>e.lift(this.name)}},addKeyboardShortcuts(){return{"Mod-Shift-b":()=>this.editor.commands.toggleBlockquote(),Backspace:()=>ULe(this.editor,this.type)}},addInputRules(){return[v1({find:WLe,type:this.type})]}}),KLe=/(?:^|\s)(\*\*(?!\s+\*\*)((?:[^*]+))\*\*(?!\s+\*\*))$/,qLe=/(?:^|\s)(\*\*(?!\s+\*\*)((?:[^*]+))\*\*(?!\s+\*\*))/g,JLe=/(?:^|\s)(__(?!\s+__)((?:[^_]+))__(?!\s+__))$/,YLe=/(?:^|\s)(__(?!\s+__)((?:[^_]+))__(?!\s+__))/g,XLe=l1.create({name:`bold`,addOptions(){return{HTMLAttributes:{}}},parseHTML(){return[{tag:`strong`},{tag:`b`,getAttrs:e=>e.style.fontWeight!==`normal`&&null},{style:`font-weight=400`,clearMark:e=>e.type.name===this.name},{style:`font-weight`,getAttrs:e=>/^(bold(er)?|[5-9]\d{2,})$/.test(e)&&null}]},renderHTML({HTMLAttributes:e}){return W1(`strong`,{...v$(this.options.HTMLAttributes,e),children:W1(`slot`,{})})},markdownTokenName:`strong`,parseMarkdown:(e,t)=>t.applyMark(`bold`,t.parseInline(e.tokens||[])),markdownOptions:{htmlReopen:{open:`<strong>`,close:`</strong>`}},renderMarkdown:(e,t)=>`**${t.renderChildren(e)}**`,addCommands(){return{setBold:()=>({commands:e})=>e.setMark(this.name),toggleBold:()=>({commands:e})=>e.toggleMark(this.name),unsetBold:()=>({commands:e})=>e.unsetMark(this.name)}},addKeyboardShortcuts(){return{"Mod-b":()=>this.editor.commands.toggleBold(),"Mod-B":()=>this.editor.commands.toggleBold()}},addInputRules(){return[h1({find:KLe,type:this.type}),h1({find:JLe,type:this.type})]},addPasteRules(){return[b1({find:qLe,type:this.type}),b1({find:YLe,type:this.type})]}}),ZLe=e=>{let t=/`([^`]+)`(?!`)$/.exec(e);return!t||t.index>0&&e[t.index-1]==="`"?null:{index:t.index,text:t[0],replaceWith:t[1]}},QLe=e=>{let t=/`([^`]+)`(?!`)/g,n=[],r;for(;(r=t.exec(e))!==null;)r.index>0&&e[r.index-1]==="`"||n.push({index:r.index,text:r[0],replaceWith:r[1]});return n},$Le=l1.create({name:`code`,addOptions(){return{HTMLAttributes:{}}},excludes:`_`,code:!0,exitable:!0,parseHTML(){return[{tag:`code`}]},renderHTML({HTMLAttributes:e}){return[`code`,v$(this.options.HTMLAttributes,e),0]},markdownTokenName:`codespan`,parseMarkdown:(e,t)=>t.applyMark(`code`,[{type:`text`,text:e.text||``}]),renderMarkdown:(e,t)=>e.content?`\`${t.renderChildren(e.content)}\``:``,addCommands(){return{setCode:()=>({commands:e})=>e.setMark(this.name),toggleCode:()=>({commands:e})=>e.toggleMark(this.name),unsetCode:()=>({commands:e})=>e.unsetMark(this.name)}},addKeyboardShortcuts(){return{"Mod-e":()=>this.editor.commands.toggleCode()}},addInputRules(){return[h1({find:ZLe,type:this.type})]},addPasteRules(){return[b1({find:QLe,type:this.type})]}}),G1=4,eRe=/^```([a-z]+)?[\s\n]$/,tRe=/^~~~([a-z]+)?[\s\n]$/,nRe=y1.create({name:`codeBlock`,addOptions(){return{languageClassPrefix:`language-`,exitOnTripleEnter:!0,exitOnArrowDown:!0,exitOnArrowUp:!0,defaultLanguage:null,enableTabIndentation:!1,tabSize:G1,HTMLAttributes:{}}},content:`text*`,marks:``,group:`block`,code:!0,defining:!0,addAttributes(){return{language:{default:this.options.defaultLanguage,parseHTML:e=>{let{languageClassPrefix:t}=this.options;return t&&[...e.firstElementChild?.classList||[]].filter(e=>e.startsWith(t)).map(e=>e.replace(t,``))[0]||null},rendered:!1}}},parseHTML(){return[{tag:`pre`,preserveWhitespace:`full`}]},renderHTML({node:e,HTMLAttributes:t}){return[`pre`,v$(this.options.HTMLAttributes,t),[`code`,{class:e.attrs.language?this.options.languageClassPrefix+e.attrs.language:null},0]]},markdownTokenName:`code`,parseMarkdown:(e,t)=>e.raw?.startsWith("```")===!1&&e.raw?.startsWith(`~~~`)===!1&&e.codeBlockStyle!==`indented`?[]:t.createNode(`codeBlock`,{language:e.lang||null},e.text?[t.createTextNode(e.text)]:[]),renderMarkdown:(e,t)=>{let n=``,r=e.attrs?.language||``;return n=e.content?[`\`\`\`${r}`,t.renderChildren(e.content),"```"].join(`
+`):`\`\`\`${r}\n\n\`\`\``,n},addCommands(){return{setCodeBlock:e=>({commands:t})=>t.setNode(this.name,e),toggleCodeBlock:e=>({commands:t})=>t.toggleNode(this.name,`paragraph`,e)}},addKeyboardShortcuts(){return{"Mod-Alt-c":()=>this.editor.commands.toggleCodeBlock(),Backspace:()=>{let{empty:e,$anchor:t}=this.editor.state.selection,n=t.pos===1;return!e||t.parent.type.name!==this.name?!1:n||!t.parent.textContent.length?this.editor.commands.clearNodes():!1},Tab:({editor:e})=>{if(!this.options.enableTabIndentation)return!1;let t=this.options.tabSize??G1,{state:n}=e,{selection:r}=n,{$from:i,empty:a}=r;if(i.parent.type!==this.type)return!1;let o=` `.repeat(t);return a?e.commands.insertContent(o):e.commands.command(({tr:e})=>{let{from:t,to:i}=r,a=n.doc.textBetween(t,i,`
 `,`
 `).split(`
 `).map(e=>o+e).join(`
-`);return e.replaceWith(t,i,n.schema.text(a)),!0})},"Shift-Tab":({editor:e})=>{if(!this.options.enableTabIndentation)return!1;let t=this.options.tabSize??H1,{state:n}=e,{selection:r}=n,{$from:i,empty:a}=r;return i.parent.type===this.type?a?e.commands.command(({tr:e})=>{let{pos:r}=i,a=i.start(),o=i.end(),s=n.doc.textBetween(a,o,`
+`);return e.replaceWith(t,i,n.schema.text(a)),!0})},"Shift-Tab":({editor:e})=>{if(!this.options.enableTabIndentation)return!1;let t=this.options.tabSize??G1,{state:n}=e,{selection:r}=n,{$from:i,empty:a}=r;return i.parent.type===this.type?a?e.commands.command(({tr:e})=>{let{pos:r}=i,a=i.start(),o=i.end(),s=n.doc.textBetween(a,o,`
 `,`
 `).split(`
-`),c=0,l=0,u=r-a;for(let e=0;e<s.length;e+=1){if(l+s[e].length>=u){c=e;break}l+=s[e].length+1}let d=s[c].match(/^ */)?.[0]||``,f=Math.min(d.length,t);if(f===0)return!0;let p=a;for(let e=0;e<c;e+=1)p+=s[e].length+1;return e.delete(p,p+f),r-p<=f&&e.setSelection(ZJ.create(e.doc,p)),!0}):e.commands.command(({tr:e})=>{let{from:i,to:a}=r,o=n.doc.textBetween(i,a,`
+`),c=0,l=0,u=r-a;for(let e=0;e<s.length;e+=1){if(l+s[e].length>=u){c=e;break}l+=s[e].length+1}let d=s[c].match(/^ */)?.[0]||``,f=Math.min(d.length,t);if(f===0)return!0;let p=a;for(let e=0;e<c;e+=1)p+=s[e].length+1;return e.delete(p,p+f),r-p<=f&&e.setSelection(eY.create(e.doc,p)),!0}):e.commands.command(({tr:e})=>{let{from:i,to:a}=r,o=n.doc.textBetween(i,a,`
 `,`
 `).split(`
 `).map(e=>{let n=e.match(/^ */)?.[0]||``,r=Math.min(n.length,t);return e.slice(r)}).join(`
 `);return e.replaceWith(i,a,n.schema.text(o)),!0}):!1},Enter:({editor:e})=>{if(!this.options.exitOnTripleEnter)return!1;let{state:t}=e,{selection:n}=t,{$from:r,empty:i}=n;if(!i||r.parent.type!==this.type)return!1;let a=r.parentOffset===r.parent.nodeSize-2,o=r.parent.textContent.endsWith(`
 
-`);return!a||!o?!1:e.chain().command(({tr:e})=>(e.delete(r.pos-2,r.pos),!0)).exitCode().run()},ArrowUp:({editor:e})=>{if(!this.options.exitOnArrowUp)return!1;let{state:t}=e,{selection:n}=t,{$from:r,empty:i}=n;if(!i||r.parent.type!==this.type||r.parentOffset!==0)return!1;let a=r.before();return a>0?!1:e.commands.insertDefaultBlock({pos:a})},ArrowDown:({editor:e})=>{if(!this.options.exitOnArrowDown)return!1;let{state:t}=e,{selection:n,doc:r}=t,{$from:i,empty:a}=n;if(!a||i.parent.type!==this.type||i.parentOffset!==i.parent.nodeSize-2)return!1;let o=i.after();return o===void 0?!1:r.nodeAt(o)?e.commands.command(({tr:e})=>(e.setSelection(JJ.near(r.resolve(o))),!0)):e.commands.exitCode()}}},addInputRules(){return[m1({find:$Le,type:this.type,getAttributes:e=>({language:e[1]})}),m1({find:eRe,type:this.type,getAttributes:e=>({language:e[1]})})]},addProseMirrorPlugins(){return[new dY({key:new mY(`codeBlockVSCodeHandler`),props:{handlePaste:(e,t)=>{if(!t.clipboardData||this.editor.isActive(this.type.name))return!1;let n=t.clipboardData.getData(`text/plain`),r=t.clipboardData.getData(`vscode-editor-data`),i=(r?JSON.parse(r):void 0)?.mode;if(!n||!i)return!1;let{tr:a,schema:o}=e.state,s=o.text(n.replace(/\r\n?/g,`
-`));return a.replaceSelectionWith(this.type.create({language:i},s)),a.selection.$from.parent.type!==this.type&&a.setSelection(ZJ.near(a.doc.resolve(Math.max(0,a.selection.from-2)))),a.setMeta(`paste`,!0),e.dispatch(a),!0}}})]}}),nRe=g1.create({name:`doc`,topNode:!0,content:`block+`,renderMarkdown:(e,t)=>e.content?t.renderChildren(e.content,`
+`);return!a||!o?!1:e.chain().command(({tr:e})=>(e.delete(r.pos-2,r.pos),!0)).exitCode().run()},ArrowUp:({editor:e})=>{if(!this.options.exitOnArrowUp)return!1;let{state:t}=e,{selection:n}=t,{$from:r,empty:i}=n;if(!i||r.parent.type!==this.type||r.parentOffset!==0)return!1;let a=r.before();return a>0?!1:e.commands.insertDefaultBlock({pos:a})},ArrowDown:({editor:e})=>{if(!this.options.exitOnArrowDown)return!1;let{state:t}=e,{selection:n,doc:r}=t,{$from:i,empty:a}=n;if(!a||i.parent.type!==this.type||i.parentOffset!==i.parent.nodeSize-2)return!1;let o=i.after();return o===void 0?!1:r.nodeAt(o)?e.commands.command(({tr:e})=>(e.setSelection(ZJ.near(r.resolve(o))),!0)):e.commands.exitCode()}}},addInputRules(){return[_1({find:eRe,type:this.type,getAttributes:e=>({language:e[1]})}),_1({find:tRe,type:this.type,getAttributes:e=>({language:e[1]})})]},addProseMirrorPlugins(){return[new mY({key:new _Y(`codeBlockVSCodeHandler`),props:{handlePaste:(e,t)=>{if(!t.clipboardData||this.editor.isActive(this.type.name))return!1;let n=t.clipboardData.getData(`text/plain`),r=t.clipboardData.getData(`vscode-editor-data`),i=(r?JSON.parse(r):void 0)?.mode;if(!n||!i)return!1;let{tr:a,schema:o}=e.state,s=o.text(n.replace(/\r\n?/g,`
+`));return a.replaceSelectionWith(this.type.create({language:i},s)),a.selection.$from.parent.type!==this.type&&a.setSelection(eY.near(a.doc.resolve(Math.max(0,a.selection.from-2)))),a.setMeta(`paste`,!0),e.dispatch(a),!0}}})]}}),rRe=y1.create({name:`doc`,topNode:!0,content:`block+`,renderMarkdown:(e,t)=>e.content?t.renderChildren(e.content,`
 
-`):``}),rRe=g1.create({name:`hardBreak`,markdownTokenName:`br`,addOptions(){return{keepMarks:!0,HTMLAttributes:{}}},inline:!0,group:`inline`,selectable:!1,linebreakReplacement:!0,parseHTML(){return[{tag:`br`}]},renderHTML({HTMLAttributes:e}){return[`br`,h$(this.options.HTMLAttributes,e)]},renderText(){return`
+`):``}),iRe=y1.create({name:`hardBreak`,markdownTokenName:`br`,addOptions(){return{keepMarks:!0,HTMLAttributes:{}}},inline:!0,group:`inline`,selectable:!1,linebreakReplacement:!0,parseHTML(){return[{tag:`br`}]},renderHTML({HTMLAttributes:e}){return[`br`,v$(this.options.HTMLAttributes,e)]},renderText(){return`
 `},renderMarkdown:()=>`  
-`,parseMarkdown:()=>({type:`hardBreak`}),addCommands(){return{setHardBreak:()=>({commands:e,chain:t,state:n,editor:r})=>e.first([()=>e.exitCode(),()=>e.command(()=>{let{selection:e,storedMarks:i}=n;if(e.$from.parent.type.spec.isolating)return!1;let{keepMarks:a}=this.options,{splittableMarks:o}=r.extensionManager,s=i||e.$to.parentOffset&&e.$from.marks();return t().insertContent({type:this.name}).command(({tr:e,dispatch:t})=>{if(t&&s&&a){let t=s.filter(e=>o.includes(e.type.name));e.ensureMarks(t)}return!0}).scrollIntoView().run()})])}},addKeyboardShortcuts(){return{"Mod-Enter":()=>this.editor.commands.setHardBreak(),"Shift-Enter":()=>this.editor.commands.setHardBreak()}}}),iRe=g1.create({name:`heading`,addOptions(){return{levels:[1,2,3,4,5,6],HTMLAttributes:{}}},content:`inline*`,group:`block`,defining:!0,addAttributes(){return{level:{default:1,rendered:!1}}},parseHTML(){return this.options.levels.map(e=>({tag:`h${e}`,attrs:{level:e}}))},renderHTML({node:e,HTMLAttributes:t}){return[`h${this.options.levels.includes(e.attrs.level)?e.attrs.level:this.options.levels[0]}`,h$(this.options.HTMLAttributes,t),0]},parseMarkdown:(e,t)=>t.createNode(`heading`,{level:e.depth||1},t.parseInline(e.tokens||[])),renderMarkdown:(e,t)=>{let n=e.attrs?.level?parseInt(e.attrs.level,10):1,r=`#`.repeat(n);return e.content?`${r} ${t.renderChildren(e.content)}`:``},addCommands(){return{setHeading:e=>({commands:t})=>this.options.levels.includes(e.level)?t.setNode(this.name,e):!1,toggleHeading:e=>({commands:t})=>this.options.levels.includes(e.level)?t.toggleNode(this.name,`paragraph`,e):!1}},addKeyboardShortcuts(){return this.options.levels.reduce((e,t)=>({...e,[`Mod-Alt-${t}`]:()=>this.editor.commands.toggleHeading({level:t})}),{})},addInputRules(){return this.options.levels.map(e=>m1({find:RegExp(`^(#{${Math.min(...this.options.levels)},${e}})\\s$`),type:this.type,getAttributes:{level:e}}))}}),aRe=g1.create({name:`horizontalRule`,addOptions(){return{HTMLAttributes:{},nextNodeType:`paragraph`}},group:`block`,parseHTML(){return[{tag:`hr`}]},renderHTML({HTMLAttributes:e}){return[`hr`,h$(this.options.HTMLAttributes,e)]},markdownTokenName:`hr`,parseMarkdown:(e,t)=>t.createNode(`horizontalRule`),renderMarkdown:()=>`---`,addCommands(){return{setHorizontalRule:()=>({chain:e,state:t})=>{if(!mIe(t,t.schema.nodes[this.name]))return!1;let{selection:n}=t,{$to:r}=n,i=e();return N$(n)?i.insertContentAt(r.pos,{type:this.name}):i.insertContent({type:this.name}),i.command(({state:e,tr:t,dispatch:n})=>{if(n){let{$to:n}=t.selection,r=n.end();if(n.nodeAfter)n.nodeAfter.isTextblock?t.setSelection(ZJ.create(t.doc,n.pos+1)):n.nodeAfter.isBlock?t.setSelection($J.create(t.doc,n.pos)):t.setSelection(ZJ.create(t.doc,n.pos));else{let i=(e.schema.nodes[this.options.nextNodeType]||n.parent.type.contentMatch.defaultType)?.create();i&&(t.insert(r,i),t.setSelection(ZJ.create(t.doc,r+1)))}t.scrollIntoView()}return!0}).run()}}},addInputRules(){return[p1({find:/^(?:---|—-|___\s|\*\*\*\s)$/,type:this.type})]}}),oRe=/(?:^|\s)(\*(?!\s+\*)((?:[^*]+))\*(?!\s+\*))$/,sRe=/(?:^|\s)(\*(?!\s+\*)((?:[^*]+))\*(?!\s+\*))/g,cRe=/(?:^|\s)(_(?!\s+_)((?:[^_]+))_(?!\s+_))$/,lRe=/(?:^|\s)(_(?!\s+_)((?:[^_]+))_(?!\s+_))/g,uRe=o1.create({name:`italic`,addOptions(){return{HTMLAttributes:{}}},parseHTML(){return[{tag:`em`},{tag:`i`,getAttrs:e=>e.style.fontStyle!==`normal`&&null},{style:`font-style=normal`,clearMark:e=>e.type.name===this.name},{style:`font-style=italic`}]},renderHTML({HTMLAttributes:e}){return[`em`,h$(this.options.HTMLAttributes,e),0]},addCommands(){return{setItalic:()=>({commands:e})=>e.setMark(this.name),toggleItalic:()=>({commands:e})=>e.toggleMark(this.name),unsetItalic:()=>({commands:e})=>e.unsetMark(this.name)}},markdownTokenName:`em`,parseMarkdown:(e,t)=>t.applyMark(`italic`,t.parseInline(e.tokens||[])),markdownOptions:{htmlReopen:{open:`<em>`,close:`</em>`}},renderMarkdown:(e,t)=>`*${t.renderChildren(e)}*`,addKeyboardShortcuts(){return{"Mod-i":()=>this.editor.commands.toggleItalic(),"Mod-I":()=>this.editor.commands.toggleItalic()}},addInputRules(){return[f1({find:oRe,type:this.type}),f1({find:cRe,type:this.type})]},addPasteRules(){return[_1({find:sRe,type:this.type}),_1({find:lRe,type:this.type})]}}),dRe=`aaa1rp3bb0ott3vie4c1le2ogado5udhabi7c0ademy5centure6ountant0s9o1tor4d0s1ult4e0g1ro2tna4f0l1rica5g0akhan5ency5i0g1rbus3force5tel5kdn3l0ibaba4pay4lfinanz6state5y2sace3tom5m0azon4ericanexpress7family11x2fam3ica3sterdam8nalytics7droid5quan4z2o0l2partments8p0le4q0uarelle8r0ab1mco4chi3my2pa2t0e3s0da2ia2sociates9t0hleta5torney7u0ction5di0ble3o3spost5thor3o0s4w0s2x0a2z0ure5ba0by2idu3namex4d1k2r0celona5laycard4s5efoot5gains6seball5ketball8uhaus5yern5b0c1t1va3cg1n2d1e0ats2uty4er2rlin4st0buy5t2f1g1h0arti5i0ble3d1ke2ng0o3o1z2j1lack0friday9ockbuster8g1omberg7ue3m0s1w2n0pparibas9o0ats3ehringer8fa2m1nd2o0k0ing5sch2tik2on4t1utique6x2r0adesco6idgestone9oadway5ker3ther5ussels7s1t1uild0ers6siness6y1zz3v1w1y1z0h3ca0b1fe2l0l1vinklein9m0era3p2non3petown5ital0one8r0avan4ds2e0er0s4s2sa1e1h1ino4t0ering5holic7ba1n1re3c1d1enter4o1rn3f0a1d2g1h0anel2nel4rity4se2t2eap3intai5ristmas6ome4urch5i0priani6rcle4sco3tadel4i0c2y3k1l0aims4eaning6ick2nic1que6othing5ud3ub0med6m1n1o0ach3des3ffee4llege4ogne5m0mbank4unity6pany2re3uter5sec4ndos3struction8ulting7tact3ractors9oking4l1p2rsica5untry4pon0s4rses6pa2r0edit0card4union9icket5own3s1uise0s6u0isinella9v1w1x1y0mru3ou3z2dad1nce3ta1e1ing3sun4y2clk3ds2e0al0er2s3gree4livery5l1oitte5ta3mocrat6ntal2ist5si0gn4v2hl2iamonds6et2gital5rect0ory7scount3ver5h2y2j1k1m1np2o0cs1tor4g1mains5t1wnload7rive4tv2ubai3pont4rban5vag2r2z2earth3t2c0o2deka3u0cation8e1g1mail3erck5nergy4gineer0ing9terprises10pson4quipment8r0icsson6ni3s0q1tate5t1u0rovision8s2vents5xchange6pert3osed4ress5traspace10fage2il1rwinds6th3mily4n0s2rm0ers5shion4t3edex3edback6rrari3ero6i0delity5o2lm2nal1nce1ial7re0stone6mdale6sh0ing5t0ness6j1k1lickr3ghts4r2orist4wers5y2m1o0o0d1tball6rd1ex2sale4um3undation8x2r0ee1senius7l1ogans4ntier7tr2ujitsu5n0d2rniture7tbol5yi3ga0l0lery3o1up4me0s3p1rden4y2b0iz3d0n2e0a1nt0ing5orge5f1g0ee3h1i0ft0s3ves2ing5l0ass3e1obal2o4m0ail3bh2o1x2n1odaddy5ld0point6f2odyear5g0le4p1t1v2p1q1r0ainger5phics5tis4een3ipe3ocery4up4s1t1u0cci3ge2ide2tars5ru3w1y2hair2mburg5ngout5us3bo2dfc0bank7ealth0care8lp1sinki6re1mes5iphop4samitsu7tachi5v2k0t2m1n1ockey4ldings5iday5medepot5goods5s0ense7nda3rse3spital5t0ing5t0els3mail5use3w2r1sbc3t1u0ghes5yatt3undai7ibm2cbc2e1u2d1e0ee3fm2kano4l1m0amat4db2mo0bilien9n0c1dustries8finiti5o2g1k1stitute6urance4e4t0ernational10uit4vestments10o1piranga7q1r0ish4s0maili5t0anbul7t0au2v3jaguar4va3cb2e0ep2tzt3welry6io2ll2m0p2nj2o0bs1urg4t1y2p0morgan6rs3uegos4niper7kaufen5ddi3e0rryhotels6properties14fh2g1h1i0a1ds2m1ndle4tchen5wi3m1n1oeln3matsu5sher5p0mg2n2r0d1ed3uokgroup8w1y0oto4z2la0caixa5mborghini8er3nd0rover6xess5salle5t0ino3robe5w0yer5b1c1ds2ease3clerc5frak4gal2o2xus4gbt3i0dl2fe0insurance9style7ghting6ke2lly3mited4o2ncoln4k2ve1ing5k1lc1p2oan0s3cker3us3l1ndon4tte1o3ve3pl0financial11r1s1t0d0a3u0ndbeck6xe1ury5v1y2ma0drid4if1son4keup4n0agement7go3p1rket0ing3s4riott5shalls7ttel5ba2c0kinsey7d1e0d0ia3et2lbourne7me1orial6n0u2rck0msd7g1h1iami3crosoft7l1ni1t2t0subishi9k1l0b1s2m0a2n1o0bi0le4da2e1i1m1nash3ey2ster5rmon3tgage6scow4to0rcycles9v0ie4p1q1r1s0d2t0n1r2u0seum3ic4v1w1x1y1z2na0b1goya4me2vy3ba2c1e0c1t0bank4flix4work5ustar5w0s2xt0direct7us4f0l2g0o2hk2i0co2ke1on3nja3ssan1y5l1o0kia3rton4w0ruz3tv4p1r0a1w2tt2u1yc2z2obi1server7ffice5kinawa6layan0group9lo3m0ega4ne1g1l0ine5oo2pen3racle3nge4g0anic5igins6saka4tsuka4t2vh3pa0ge2nasonic7ris2s1tners4s1y3y2ccw3e0t2f0izer5g1h0armacy6d1ilips5one2to0graphy6s4ysio5ics1tet2ures6d1n0g1k2oneer5zza4k1l0ace2y0station9umbing5s3m1n0c2ohl2ker3litie5rn2st3r0axi3ess3ime3o0d0uctions8f1gressive8mo2perties3y5tection8u0dential9s1t1ub2w0c2y2qa1pon3uebec3st5racing4dio4e0ad1lestate6tor2y4cipes5d0umbrella9hab3ise0n3t2liance6n0t0als5pair3ort3ublican8st0aurant8view0s5xroth6ich0ardli6oh3l1o1p2o0cks3deo3gers4om3s0vp3u0gby3hr2n2w0e2yukyu6sa0arland6fe0ty4kura4le1on3msclub4ung5ndvik0coromant12ofi4p1rl2s1ve2xo3b0i1s2c0b1haeffler7midt4olarships8ol3ule3warz5ience5ot3d1e0arch3t2cure1ity6ek2lect4ner3rvices6ven3w1x0y3fr2g1h0angrila6rp3ell3ia1ksha5oes2p0ping5uji3w3i0lk2na1gles5te3j1k0i0n2y0pe4l0ing4m0art3ile4n0cf3o0ccer3ial4ftbank4ware6hu2lar2utions7ng1y2y2pa0ce3ort2t3r0l2s1t0ada2ples4r1tebank4farm7c0group6ockholm6rage3e3ream4udio2y3yle4u0cks3pplies3y2ort5rf1gery5zuki5v1watch4iss4x1y0dney4stems6z2tab1ipei4lk2obao4rget4tamotors6r2too4x0i3c0i2d0k2eam2ch0nology8l1masek5nnis4va3f1g1h0d1eater2re6iaa2ckets5enda4ps2res2ol4j0maxx4x2k0maxx5l1m0all4n1o0day3kyo3ols3p1ray3shiba5tal3urs3wn2yota3s3r0ade1ing4ining5vel0ers0insurance16ust3v2t1ube2i1nes3shu4v0s2w1z2ua1bank3s2g1k1nicom3versity8o2ol2ps2s1y1z2va0cations7na1guard7c1e0gas3ntures6risign5mögensberater2ung14sicherung10t2g1i0ajes4deo3g1king4llas4n1p1rgin4sa1ion4va1o3laanderen9n1odka3lvo3te1ing3o2yage5u2wales2mart4ter4ng0gou5tch0es6eather0channel12bcam3er2site5d0ding5ibo2r3f1hoswho6ien2ki2lliamhill9n0dows4e1ners6me2oodside6rk0s2ld3w2s1tc1f3xbox3erox4ihuan4n2xx2yz3yachts4hoo3maxun5ndex5e1odobashi7ga2kohama6u0tube6t1un3za0ppos4ra3ero3ip2m1one3uerich6w2`,fRe=`ελ1υ2бг1ел3дети4ею2католик6ом3мкд2он1сква6онлайн5рг3рус2ф2сайт3рб3укр3қаз3հայ3ישראל5קום3ابوظبي5رامكو5لاردن4بحرين5جزائر5سعودية6عليان5مغرب5مارات5یران5بارت2زار4يتك3ھارت5تونس4سودان3رية5شبكة4عراق2ب2مان4فلسطين6قطر3كاثوليك6وم3مصر2ليسيا5وريتانيا7قع4همراه5پاکستان7ڀارت4कॉम3नेट3भारत0म्3ोत5संगठन5বাংলা5ভারত2ৰত4ਭਾਰਤ4ભારત4ଭାରତ4இந்தியா6லங்கை6சிங்கப்பூர்11భారత్5ಭಾರತ4ഭാരതം5ලංකා4คอม3ไทย3ລາວ3გე2みんな3アマゾン4クラウド4グーグル4コム2ストア3セール3ファッション6ポイント4世界2中信1国1國1文网3亚马逊3企业2佛山2信息2健康2八卦2公司1益2台湾1灣2商城1店1标2嘉里0大酒店5在线2大拿2天主教3娱乐2家電2广东2微博2慈善2我爱你3手机2招聘2政务1府2新加坡2闻2时尚2書籍2机构2淡马锡3游戏2澳門2点看2移动2组织机构4网址1店1站1络2联通2谷歌2购物2通販2集团2電訊盈科4飞利浦3食品2餐厅2香格里拉3港2닷넷1컴2삼성2한국2`,U1=`numeric`,W1=`ascii`,G1=`alpha`,K1=`asciinumeric`,q1=`alphanumeric`,J1=`domain`,Y1=`emoji`,pRe=`scheme`,mRe=`slashscheme`,X1=`whitespace`;function hRe(e,t){return e in t||(t[e]=[]),t[e]}function Z1(e,t,n){t[U1]&&(t[K1]=!0,t[q1]=!0),t[W1]&&(t[K1]=!0,t[G1]=!0),t[K1]&&(t[q1]=!0),t[G1]&&(t[q1]=!0),t[q1]&&(t[J1]=!0),t[Y1]&&(t[J1]=!0);for(let r in t){let t=hRe(r,n);t.indexOf(e)<0&&t.push(e)}}function gRe(e,t){let n={};for(let r in t)t[r].indexOf(e)>=0&&(n[r]=!0);return n}function Q1(e=null){this.j={},this.jr=[],this.jd=null,this.t=e}Q1.groups={},Q1.prototype={accepts(){return!!this.t},go(e){let t=this,n=t.j[e];if(n)return n;for(let n=0;n<t.jr.length;n++){let r=t.jr[n][0],i=t.jr[n][1];if(i&&r.test(e))return i}return t.jd},has(e,t=!1){return t?e in this.j:!!this.go(e)},ta(e,t,n,r){for(let i=0;i<e.length;i++)this.tt(e[i],t,n,r)},tr(e,t,n,r){r||=Q1.groups;let i;return t&&t.j?i=t:(i=new Q1(t),n&&r&&Z1(t,n,r)),this.jr.push([e,i]),i},ts(e,t,n,r){let i=this,a=e.length;if(!a)return i;for(let t=0;t<a-1;t++)i=i.tt(e[t]);return i.tt(e[a-1],t,n,r)},tt(e,t,n,r){r||=Q1.groups;let i=this;if(t&&t.j)return i.j[e]=t,t;let a=t,o,s=i.go(e);return s?(o=new Q1,Object.assign(o.j,s.j),o.jr.push.apply(o.jr,s.jr),o.jd=s.jd,o.t=s.t):o=new Q1,a&&(r&&(o.t&&typeof o.t==`string`?Z1(a,Object.assign(gRe(o.t,r),n),r):n&&Z1(a,n,r)),o.t=a),i.j[e]=o,o}};var $1=(e,t,n,r,i)=>e.ta(t,n,r,i),e0=(e,t,n,r,i)=>e.tr(t,n,r,i),t0=(e,t,n,r,i)=>e.ts(t,n,r,i),n0=(e,t,n,r,i)=>e.tt(t,n,r,i),r0=`WORD`,i0=`UWORD`,a0=`ASCIINUMERICAL`,o0=`ALPHANUMERICAL`,s0=`LOCALHOST`,c0=`TLD`,l0=`UTLD`,u0=`SCHEME`,d0=`SLASH_SCHEME`,f0=`NUM`,p0=`WS`,m0=`NL`,h0=`OPENBRACE`,g0=`CLOSEBRACE`,_0=`OPENBRACKET`,v0=`CLOSEBRACKET`,y0=`OPENPAREN`,b0=`CLOSEPAREN`,x0=`OPENANGLEBRACKET`,S0=`CLOSEANGLEBRACKET`,C0=`FULLWIDTHLEFTPAREN`,w0=`FULLWIDTHRIGHTPAREN`,T0=`LEFTCORNERBRACKET`,E0=`RIGHTCORNERBRACKET`,D0=`LEFTWHITECORNERBRACKET`,O0=`RIGHTWHITECORNERBRACKET`,k0=`FULLWIDTHLESSTHAN`,A0=`FULLWIDTHGREATERTHAN`,j0=`AMPERSAND`,M0=`APOSTROPHE`,N0=`ASTERISK`,P0=`AT`,F0=`BACKSLASH`,I0=`BACKTICK`,L0=`CARET`,R0=`COLON`,z0=`COMMA`,B0=`DOLLAR`,V0=`DOT`,H0=`EQUALS`,U0=`EXCLAMATION`,W0=`HYPHEN`,G0=`PERCENT`,K0=`PIPE`,q0=`PLUS`,J0=`POUND`,Y0=`QUERY`,X0=`QUOTE`,Z0=`FULLWIDTHMIDDLEDOT`,Q0=`SEMI`,$0=`SLASH`,e2=`TILDE`,t2=`UNDERSCORE`,n2=`EMOJI`,r2=`SYM`,i2=Object.freeze({__proto__:null,ALPHANUMERICAL:o0,AMPERSAND:j0,APOSTROPHE:M0,ASCIINUMERICAL:a0,ASTERISK:N0,AT:P0,BACKSLASH:F0,BACKTICK:I0,CARET:L0,CLOSEANGLEBRACKET:S0,CLOSEBRACE:g0,CLOSEBRACKET:v0,CLOSEPAREN:b0,COLON:R0,COMMA:z0,DOLLAR:B0,DOT:V0,EMOJI:n2,EQUALS:H0,EXCLAMATION:U0,FULLWIDTHGREATERTHAN:A0,FULLWIDTHLEFTPAREN:C0,FULLWIDTHLESSTHAN:k0,FULLWIDTHMIDDLEDOT:Z0,FULLWIDTHRIGHTPAREN:w0,HYPHEN:W0,LEFTCORNERBRACKET:T0,LEFTWHITECORNERBRACKET:D0,LOCALHOST:s0,NL:m0,NUM:f0,OPENANGLEBRACKET:x0,OPENBRACE:h0,OPENBRACKET:_0,OPENPAREN:y0,PERCENT:G0,PIPE:K0,PLUS:q0,POUND:J0,QUERY:Y0,QUOTE:X0,RIGHTCORNERBRACKET:E0,RIGHTWHITECORNERBRACKET:O0,SCHEME:u0,SEMI:Q0,SLASH:$0,SLASH_SCHEME:d0,SYM:r2,TILDE:e2,TLD:c0,UNDERSCORE:t2,UTLD:l0,UWORD:i0,WORD:r0,WS:p0}),a2=/[a-z]/,o2=/\p{L}/u,s2=/\p{Emoji}/u,c2=/\d/,l2=/\s/,u2=`\r`,d2=`
-`,_Re=`️`,vRe=`‍`,f2=``,p2=null,m2=null;function yRe(e=[]){let t={};Q1.groups=t;let n=new Q1;p2??=_2(dRe),m2??=_2(fRe),n0(n,`'`,M0),n0(n,`{`,h0),n0(n,`}`,g0),n0(n,`[`,_0),n0(n,`]`,v0),n0(n,`(`,y0),n0(n,`)`,b0),n0(n,`<`,x0),n0(n,`>`,S0),n0(n,`（`,C0),n0(n,`）`,w0),n0(n,`「`,T0),n0(n,`」`,E0),n0(n,`『`,D0),n0(n,`』`,O0),n0(n,`＜`,k0),n0(n,`＞`,A0),n0(n,`&`,j0),n0(n,`*`,N0),n0(n,`@`,P0),n0(n,"`",I0),n0(n,`^`,L0),n0(n,`:`,R0),n0(n,`,`,z0),n0(n,`$`,B0),n0(n,`.`,V0),n0(n,`=`,H0),n0(n,`!`,U0),n0(n,`-`,W0),n0(n,`%`,G0),n0(n,`|`,K0),n0(n,`+`,q0),n0(n,`#`,J0),n0(n,`?`,Y0),n0(n,`"`,X0),n0(n,`/`,$0),n0(n,`;`,Q0),n0(n,`~`,e2),n0(n,`_`,t2),n0(n,`\\`,F0),n0(n,`・`,Z0);let r=e0(n,c2,f0,{[U1]:!0});e0(r,c2,r);let i=e0(r,a2,a0,{[K1]:!0}),a=e0(r,o2,o0,{[q1]:!0}),o=e0(n,a2,r0,{[W1]:!0});e0(o,c2,i),e0(o,a2,o),e0(i,c2,i),e0(i,a2,i);let s=e0(n,o2,i0,{[G1]:!0});e0(s,a2),e0(s,c2,a),e0(s,o2,s),e0(a,c2,a),e0(a,a2),e0(a,o2,a);let c=n0(n,d2,m0,{[X1]:!0}),l=n0(n,u2,p0,{[X1]:!0}),u=e0(n,l2,p0,{[X1]:!0});n0(n,f2,u),n0(l,d2,c),n0(l,f2,u),e0(l,l2,u),n0(u,u2),n0(u,d2),e0(u,l2,u),n0(u,f2,u);let d=e0(n,s2,n2,{[Y1]:!0});n0(d,`#`),e0(d,s2,d),n0(d,_Re,d);let f=n0(d,vRe);n0(f,`#`),e0(f,s2,d);let p=[[a2,o],[c2,i]],m=[[a2,null],[o2,s],[c2,a]];for(let e=0;e<p2.length;e++)g2(n,p2[e],c0,r0,p);for(let e=0;e<m2.length;e++)g2(n,m2[e],l0,i0,m);Z1(c0,{tld:!0,ascii:!0},t),Z1(l0,{utld:!0,alpha:!0},t),g2(n,`file`,u0,r0,p),g2(n,`mailto`,u0,r0,p),g2(n,`http`,d0,r0,p),g2(n,`https`,d0,r0,p),g2(n,`ftp`,d0,r0,p),g2(n,`ftps`,d0,r0,p),Z1(u0,{scheme:!0,ascii:!0},t),Z1(d0,{slashscheme:!0,ascii:!0},t),e=e.sort((e,t)=>e[0]>t[0]?1:-1);for(let t=0;t<e.length;t++){let r=e[t][0],i=e[t][1]?{[pRe]:!0}:{[mRe]:!0};r.indexOf(`-`)>=0?i[J1]=!0:a2.test(r)?c2.test(r)?i[K1]=!0:i[W1]=!0:i[U1]=!0,t0(n,r,r,i)}return t0(n,`localhost`,s0,{ascii:!0}),n.jd=new Q1(r2),{start:n,tokens:Object.assign({groups:t},i2)}}function h2(e,t){let n=bRe(t.replace(/[A-Z]/g,e=>e.toLowerCase())),r=n.length,i=[],a=0,o=0;for(;o<r;){let s=e,c=null,l=0,u=null,d=-1,f=-1;for(;o<r&&(c=s.go(n[o]));)s=c,s.accepts()?(d=0,f=0,u=s):d>=0&&(d+=n[o].length,f++),l+=n[o].length,a+=n[o].length,o++;a-=d,o-=f,l-=d,i.push({t:u.t,v:t.slice(a-l,a),s:a-l,e:a})}return i}function bRe(e){let t=[],n=e.length,r=0;for(;r<n;){let i=e.charCodeAt(r),a,o=i<55296||i>56319||r+1===n||(a=e.charCodeAt(r+1))<56320||a>57343?e[r]:e.slice(r,r+2);t.push(o),r+=o.length}return t}function g2(e,t,n,r,i){let a,o=t.length;for(let n=0;n<o-1;n++){let o=t[n];e.j[o]?a=e.j[o]:(a=new Q1(r),a.jr=i.slice(),e.j[o]=a),e=a}return a=new Q1(n),a.jr=i.slice(),e.j[t[o-1]]=a,a}function _2(e){let t=[],n=[],r=0;for(;r<e.length;){let i=0;for(;`0123456789`.indexOf(e[r+i])>=0;)i++;if(i>0){t.push(n.join(``));for(let t=parseInt(e.substring(r,r+i),10);t>0;t--)n.pop();r+=i}else n.push(e[r]),r++}return t}var v2={defaultProtocol:`http`,events:null,format:b2,formatHref:b2,nl2br:!1,tagName:`a`,target:null,rel:null,validate:!0,truncate:1/0,className:null,attributes:null,ignoreTags:[],render:null};function y2(e,t=null){let n=Object.assign({},v2);e&&(n=Object.assign(n,e instanceof y2?e.o:e));let r=n.ignoreTags,i=[];for(let e=0;e<r.length;e++)i.push(r[e].toUpperCase());this.o=n,t&&(this.defaultRender=t),this.ignoreTags=i}y2.prototype={o:v2,ignoreTags:[],defaultRender(e){return e},check(e){return this.get(`validate`,e.toString(),e)},get(e,t,n){let r=t!=null,i=this.o[e];return i&&(typeof i==`object`?(i=n.t in i?i[n.t]:v2[e],typeof i==`function`&&r&&(i=i(t,n))):typeof i==`function`&&r&&(i=i(t,n.t,n)),i)},getObj(e,t,n){let r=this.o[e];return typeof r==`function`&&t!=null&&(r=r(t,n.t,n)),r},render(e){let t=e.render(this);return(this.get(`render`,null,e)||this.defaultRender)(t,e.t,e)}};function b2(e){return e}function x2(e,t){this.t=`token`,this.v=e,this.tk=t}x2.prototype={isLink:!1,toString(){return this.v},toHref(e){return this.toString()},toFormattedString(e){let t=this.toString(),n=e.get(`truncate`,t,this),r=e.get(`format`,t,this);return n&&r.length>n?r.substring(0,n)+`…`:r},toFormattedHref(e){return e.get(`formatHref`,this.toHref(e.get(`defaultProtocol`)),this)},startIndex(){return this.tk[0].s},endIndex(){return this.tk[this.tk.length-1].e},toObject(e=v2.defaultProtocol){return{type:this.t,value:this.toString(),isLink:this.isLink,href:this.toHref(e),start:this.startIndex(),end:this.endIndex()}},toFormattedObject(e){return{type:this.t,value:this.toFormattedString(e),isLink:this.isLink,href:this.toFormattedHref(e),start:this.startIndex(),end:this.endIndex()}},validate(e){return e.get(`validate`,this.toString(),this)},render(e){let t=this,n=this.toHref(e.get(`defaultProtocol`)),r=e.get(`formatHref`,n,this),i=e.get(`tagName`,n,t),a=this.toFormattedString(e),o={},s=e.get(`className`,n,t),c=e.get(`target`,n,t),l=e.get(`rel`,n,t),u=e.getObj(`attributes`,n,t),d=e.getObj(`events`,n,t);return o.href=r,s&&(o.class=s),c&&(o.target=c),l&&(o.rel=l),u&&Object.assign(o,u),{tagName:i,attributes:o,content:a,eventListeners:d}}};function S2(e,t){class n extends x2{constructor(t,n){super(t,n),this.t=e}}for(let e in t)n.prototype[e]=t[e];return n.t=e,n}var xRe=S2(`email`,{isLink:!0,toHref(){return`mailto:`+this.toString()}}),C2=S2(`text`),SRe=S2(`nl`),w2=S2(`url`,{isLink:!0,toHref(e=v2.defaultProtocol){return this.hasProtocol()?this.v:`${e}://${this.v}`},hasProtocol(){let e=this.tk;return e.length>=2&&e[0].t!==s0&&e[1].t===R0}}),T2=e=>new Q1(e);function CRe({groups:e}){let t=e.domain.concat([j0,N0,P0,F0,I0,L0,B0,H0,W0,f0,G0,K0,q0,J0,$0,r2,e2,t2]),n=[M0,R0,z0,V0,U0,G0,Y0,X0,Q0,x0,S0,h0,g0,v0,_0,y0,b0,C0,w0,T0,E0,D0,O0,k0,A0],r=[j0,M0,N0,F0,I0,L0,B0,H0,W0,h0,g0,G0,K0,q0,J0,Y0,$0,r2,e2,t2],i=T2(),a=n0(i,e2);$1(a,r,a),$1(a,e.domain,a);let o=T2(),s=T2(),c=T2();$1(i,e.domain,o),$1(i,e.scheme,s),$1(i,e.slashscheme,c),$1(o,r,a),$1(o,e.domain,o);let l=n0(o,P0);n0(a,P0,l),n0(s,P0,l),n0(c,P0,l);let u=n0(a,V0);$1(u,r,a),$1(u,e.domain,a);let d=T2();$1(l,e.domain,d),$1(d,e.domain,d);let f=n0(d,V0);$1(f,e.domain,d);let p=T2(xRe);$1(f,e.tld,p),$1(f,e.utld,p),n0(l,s0,p);let m=n0(d,W0);n0(m,W0,m),$1(m,e.domain,d),$1(p,e.domain,d),n0(p,V0,f),n0(p,W0,m);let h=n0(o,W0),g=n0(o,V0);n0(h,W0,h),$1(h,e.domain,o),$1(g,r,a),$1(g,e.domain,o);let _=T2(w2);$1(g,e.tld,_),$1(g,e.utld,_),$1(_,e.domain,o),$1(_,r,a),n0(_,V0,g),n0(_,W0,h),n0(_,P0,l);let v=n0(_,R0),y=T2(w2);$1(v,e.numeric,y);let b=T2(w2),x=T2();$1(b,t,b),$1(b,n,x),$1(x,t,b),$1(x,n,x),n0(_,$0,b),n0(y,$0,b);let S=n0(s,R0),C=n0(n0(n0(c,R0),$0),$0);$1(s,e.domain,o),n0(s,V0,g),n0(s,W0,h),$1(c,e.domain,o),n0(c,V0,g),n0(c,W0,h),$1(S,e.domain,b),n0(S,$0,b),n0(S,Y0,b),$1(C,e.domain,b),$1(C,t,b),n0(C,$0,b);let w=[[h0,g0],[_0,v0],[y0,b0],[x0,S0],[C0,w0],[T0,E0],[D0,O0],[k0,A0]];for(let e=0;e<w.length;e++){let[r,i]=w[e],a=n0(b,r);n0(x,r,a);let o=T2(w2);$1(a,t,o);let s=T2();$1(a,n,s),n0(a,i,b),$1(o,t,o),$1(o,n,s),$1(s,t,o),$1(s,n,s),n0(o,i,b),n0(s,i,b)}return n0(i,s0,_),n0(i,m0,SRe),{start:i,tokens:i2}}function wRe(e,t,n){let r=n.length,i=0,a=[],o=[];for(;i<r;){let s=e,c=null,l=null,u=0,d=null,f=-1;for(;i<r&&!(c=s.go(n[i].t));)o.push(n[i++]);for(;i<r&&(l=c||s.go(n[i].t));)c=null,s=l,s.accepts()?(f=0,d=s):f>=0&&f++,i++,u++;if(f<0)i-=u,i<r&&(o.push(n[i]),i++);else{o.length>0&&(a.push(E2(C2,t,o)),o=[]),i-=f,u-=f;let e=d.t,r=n.slice(i-u,i);a.push(E2(e,t,r))}}return o.length>0&&a.push(E2(C2,t,o)),a}function E2(e,t,n){let r=n[0].s,i=n[n.length-1].e;return new e(t.slice(r,i),n)}var TRe=typeof console<`u`&&console&&console.warn||(()=>{}),ERe=`until manual call of linkify.init(). Register all schemes and plugins before invoking linkify the first time.`,D2={scanner:null,parser:null,tokenQueue:[],pluginQueue:[],customSchemes:[],initialized:!1};function DRe(){return Q1.groups={},D2.scanner=null,D2.parser=null,D2.tokenQueue=[],D2.pluginQueue=[],D2.customSchemes=[],D2.initialized=!1,D2}function O2(e,t=!1){if(D2.initialized&&TRe(`linkifyjs: already initialized - will not register custom scheme "${e}" ${ERe}`),!/^[0-9a-z]+(-[0-9a-z]+)*$/.test(e))throw Error(`linkifyjs: incorrect scheme format.
+`,parseMarkdown:()=>({type:`hardBreak`}),addCommands(){return{setHardBreak:()=>({commands:e,chain:t,state:n,editor:r})=>e.first([()=>e.exitCode(),()=>e.command(()=>{let{selection:e,storedMarks:i}=n;if(e.$from.parent.type.spec.isolating)return!1;let{keepMarks:a}=this.options,{splittableMarks:o}=r.extensionManager,s=i||e.$to.parentOffset&&e.$from.marks();return t().insertContent({type:this.name}).command(({tr:e,dispatch:t})=>{if(t&&s&&a){let t=s.filter(e=>o.includes(e.type.name));e.ensureMarks(t)}return!0}).scrollIntoView().run()})])}},addKeyboardShortcuts(){return{"Mod-Enter":()=>this.editor.commands.setHardBreak(),"Shift-Enter":()=>this.editor.commands.setHardBreak()}}}),aRe=y1.create({name:`heading`,addOptions(){return{levels:[1,2,3,4,5,6],HTMLAttributes:{}}},content:`inline*`,group:`block`,defining:!0,addAttributes(){return{level:{default:1,rendered:!1}}},parseHTML(){return this.options.levels.map(e=>({tag:`h${e}`,attrs:{level:e}}))},renderHTML({node:e,HTMLAttributes:t}){return[`h${this.options.levels.includes(e.attrs.level)?e.attrs.level:this.options.levels[0]}`,v$(this.options.HTMLAttributes,t),0]},parseMarkdown:(e,t)=>t.createNode(`heading`,{level:e.depth||1},t.parseInline(e.tokens||[])),renderMarkdown:(e,t)=>{let n=e.attrs?.level?parseInt(e.attrs.level,10):1,r=`#`.repeat(n);return e.content?`${r} ${t.renderChildren(e.content)}`:``},addCommands(){return{setHeading:e=>({commands:t})=>this.options.levels.includes(e.level)?t.setNode(this.name,e):!1,toggleHeading:e=>({commands:t})=>this.options.levels.includes(e.level)?t.toggleNode(this.name,`paragraph`,e):!1}},addKeyboardShortcuts(){return this.options.levels.reduce((e,t)=>({...e,[`Mod-Alt-${t}`]:()=>this.editor.commands.toggleHeading({level:t})}),{})},addInputRules(){return this.options.levels.map(e=>_1({find:RegExp(`^(#{${Math.min(...this.options.levels)},${e}})\\s$`),type:this.type,getAttributes:{level:e}}))}}),oRe=y1.create({name:`horizontalRule`,addOptions(){return{HTMLAttributes:{},nextNodeType:`paragraph`}},group:`block`,parseHTML(){return[{tag:`hr`}]},renderHTML({HTMLAttributes:e}){return[`hr`,v$(this.options.HTMLAttributes,e)]},markdownTokenName:`hr`,parseMarkdown:(e,t)=>t.createNode(`horizontalRule`),renderMarkdown:()=>`---`,addCommands(){return{setHorizontalRule:()=>({chain:e,state:t})=>{if(!hIe(t,t.schema.nodes[this.name]))return!1;let{selection:n}=t,{$to:r}=n,i=e();return I$(n)?i.insertContentAt(r.pos,{type:this.name}):i.insertContent({type:this.name}),i.command(({state:e,tr:t,dispatch:n})=>{if(n){let{$to:n}=t.selection,r=n.end();if(n.nodeAfter)n.nodeAfter.isTextblock?t.setSelection(eY.create(t.doc,n.pos+1)):n.nodeAfter.isBlock?t.setSelection(nY.create(t.doc,n.pos)):t.setSelection(eY.create(t.doc,n.pos));else{let i=(e.schema.nodes[this.options.nextNodeType]||n.parent.type.contentMatch.defaultType)?.create();i&&(t.insert(r,i),t.setSelection(eY.create(t.doc,r+1)))}t.scrollIntoView()}return!0}).run()}}},addInputRules(){return[g1({find:/^(?:---|—-|___\s|\*\*\*\s)$/,type:this.type})]}}),sRe=/(?:^|\s)(\*(?!\s+\*)((?:[^*]+))\*(?!\s+\*))$/,cRe=/(?:^|\s)(\*(?!\s+\*)((?:[^*]+))\*(?!\s+\*))/g,lRe=/(?:^|\s)(_(?!\s+_)((?:[^_]+))_(?!\s+_))$/,uRe=/(?:^|\s)(_(?!\s+_)((?:[^_]+))_(?!\s+_))/g,dRe=l1.create({name:`italic`,addOptions(){return{HTMLAttributes:{}}},parseHTML(){return[{tag:`em`},{tag:`i`,getAttrs:e=>e.style.fontStyle!==`normal`&&null},{style:`font-style=normal`,clearMark:e=>e.type.name===this.name},{style:`font-style=italic`}]},renderHTML({HTMLAttributes:e}){return[`em`,v$(this.options.HTMLAttributes,e),0]},addCommands(){return{setItalic:()=>({commands:e})=>e.setMark(this.name),toggleItalic:()=>({commands:e})=>e.toggleMark(this.name),unsetItalic:()=>({commands:e})=>e.unsetMark(this.name)}},markdownTokenName:`em`,parseMarkdown:(e,t)=>t.applyMark(`italic`,t.parseInline(e.tokens||[])),markdownOptions:{htmlReopen:{open:`<em>`,close:`</em>`}},renderMarkdown:(e,t)=>`*${t.renderChildren(e)}*`,addKeyboardShortcuts(){return{"Mod-i":()=>this.editor.commands.toggleItalic(),"Mod-I":()=>this.editor.commands.toggleItalic()}},addInputRules(){return[h1({find:sRe,type:this.type}),h1({find:lRe,type:this.type})]},addPasteRules(){return[b1({find:cRe,type:this.type}),b1({find:uRe,type:this.type})]}}),fRe=`aaa1rp3bb0ott3vie4c1le2ogado5udhabi7c0ademy5centure6ountant0s9o1tor4d0s1ult4e0g1ro2tna4f0l1rica5g0akhan5ency5i0g1rbus3force5tel5kdn3l0ibaba4pay4lfinanz6state5y2sace3tom5m0azon4ericanexpress7family11x2fam3ica3sterdam8nalytics7droid5quan4z2o0l2partments8p0le4q0uarelle8r0ab1mco4chi3my2pa2t0e3s0da2ia2sociates9t0hleta5torney7u0ction5di0ble3o3spost5thor3o0s4w0s2x0a2z0ure5ba0by2idu3namex4d1k2r0celona5laycard4s5efoot5gains6seball5ketball8uhaus5yern5b0c1t1va3cg1n2d1e0ats2uty4er2rlin4st0buy5t2f1g1h0arti5i0ble3d1ke2ng0o3o1z2j1lack0friday9ockbuster8g1omberg7ue3m0s1w2n0pparibas9o0ats3ehringer8fa2m1nd2o0k0ing5sch2tik2on4t1utique6x2r0adesco6idgestone9oadway5ker3ther5ussels7s1t1uild0ers6siness6y1zz3v1w1y1z0h3ca0b1fe2l0l1vinklein9m0era3p2non3petown5ital0one8r0avan4ds2e0er0s4s2sa1e1h1ino4t0ering5holic7ba1n1re3c1d1enter4o1rn3f0a1d2g1h0anel2nel4rity4se2t2eap3intai5ristmas6ome4urch5i0priani6rcle4sco3tadel4i0c2y3k1l0aims4eaning6ick2nic1que6othing5ud3ub0med6m1n1o0ach3des3ffee4llege4ogne5m0mbank4unity6pany2re3uter5sec4ndos3struction8ulting7tact3ractors9oking4l1p2rsica5untry4pon0s4rses6pa2r0edit0card4union9icket5own3s1uise0s6u0isinella9v1w1x1y0mru3ou3z2dad1nce3ta1e1ing3sun4y2clk3ds2e0al0er2s3gree4livery5l1oitte5ta3mocrat6ntal2ist5si0gn4v2hl2iamonds6et2gital5rect0ory7scount3ver5h2y2j1k1m1np2o0cs1tor4g1mains5t1wnload7rive4tv2ubai3pont4rban5vag2r2z2earth3t2c0o2deka3u0cation8e1g1mail3erck5nergy4gineer0ing9terprises10pson4quipment8r0icsson6ni3s0q1tate5t1u0rovision8s2vents5xchange6pert3osed4ress5traspace10fage2il1rwinds6th3mily4n0s2rm0ers5shion4t3edex3edback6rrari3ero6i0delity5o2lm2nal1nce1ial7re0stone6mdale6sh0ing5t0ness6j1k1lickr3ghts4r2orist4wers5y2m1o0o0d1tball6rd1ex2sale4um3undation8x2r0ee1senius7l1ogans4ntier7tr2ujitsu5n0d2rniture7tbol5yi3ga0l0lery3o1up4me0s3p1rden4y2b0iz3d0n2e0a1nt0ing5orge5f1g0ee3h1i0ft0s3ves2ing5l0ass3e1obal2o4m0ail3bh2o1x2n1odaddy5ld0point6f2odyear5g0le4p1t1v2p1q1r0ainger5phics5tis4een3ipe3ocery4up4s1t1u0cci3ge2ide2tars5ru3w1y2hair2mburg5ngout5us3bo2dfc0bank7ealth0care8lp1sinki6re1mes5iphop4samitsu7tachi5v2k0t2m1n1ockey4ldings5iday5medepot5goods5s0ense7nda3rse3spital5t0ing5t0els3mail5use3w2r1sbc3t1u0ghes5yatt3undai7ibm2cbc2e1u2d1e0ee3fm2kano4l1m0amat4db2mo0bilien9n0c1dustries8finiti5o2g1k1stitute6urance4e4t0ernational10uit4vestments10o1piranga7q1r0ish4s0maili5t0anbul7t0au2v3jaguar4va3cb2e0ep2tzt3welry6io2ll2m0p2nj2o0bs1urg4t1y2p0morgan6rs3uegos4niper7kaufen5ddi3e0rryhotels6properties14fh2g1h1i0a1ds2m1ndle4tchen5wi3m1n1oeln3matsu5sher5p0mg2n2r0d1ed3uokgroup8w1y0oto4z2la0caixa5mborghini8er3nd0rover6xess5salle5t0ino3robe5w0yer5b1c1ds2ease3clerc5frak4gal2o2xus4gbt3i0dl2fe0insurance9style7ghting6ke2lly3mited4o2ncoln4k2ve1ing5k1lc1p2oan0s3cker3us3l1ndon4tte1o3ve3pl0financial11r1s1t0d0a3u0ndbeck6xe1ury5v1y2ma0drid4if1son4keup4n0agement7go3p1rket0ing3s4riott5shalls7ttel5ba2c0kinsey7d1e0d0ia3et2lbourne7me1orial6n0u2rck0msd7g1h1iami3crosoft7l1ni1t2t0subishi9k1l0b1s2m0a2n1o0bi0le4da2e1i1m1nash3ey2ster5rmon3tgage6scow4to0rcycles9v0ie4p1q1r1s0d2t0n1r2u0seum3ic4v1w1x1y1z2na0b1goya4me2vy3ba2c1e0c1t0bank4flix4work5ustar5w0s2xt0direct7us4f0l2g0o2hk2i0co2ke1on3nja3ssan1y5l1o0kia3rton4w0ruz3tv4p1r0a1w2tt2u1yc2z2obi1server7ffice5kinawa6layan0group9lo3m0ega4ne1g1l0ine5oo2pen3racle3nge4g0anic5igins6saka4tsuka4t2vh3pa0ge2nasonic7ris2s1tners4s1y3y2ccw3e0t2f0izer5g1h0armacy6d1ilips5one2to0graphy6s4ysio5ics1tet2ures6d1n0g1k2oneer5zza4k1l0ace2y0station9umbing5s3m1n0c2ohl2ker3litie5rn2st3r0axi3ess3ime3o0d0uctions8f1gressive8mo2perties3y5tection8u0dential9s1t1ub2w0c2y2qa1pon3uebec3st5racing4dio4e0ad1lestate6tor2y4cipes5d0umbrella9hab3ise0n3t2liance6n0t0als5pair3ort3ublican8st0aurant8view0s5xroth6ich0ardli6oh3l1o1p2o0cks3deo3gers4om3s0vp3u0gby3hr2n2w0e2yukyu6sa0arland6fe0ty4kura4le1on3msclub4ung5ndvik0coromant12ofi4p1rl2s1ve2xo3b0i1s2c0b1haeffler7midt4olarships8ol3ule3warz5ience5ot3d1e0arch3t2cure1ity6ek2lect4ner3rvices6ven3w1x0y3fr2g1h0angrila6rp3ell3ia1ksha5oes2p0ping5uji3w3i0lk2na1gles5te3j1k0i0n2y0pe4l0ing4m0art3ile4n0cf3o0ccer3ial4ftbank4ware6hu2lar2utions7ng1y2y2pa0ce3ort2t3r0l2s1t0ada2ples4r1tebank4farm7c0group6ockholm6rage3e3ream4udio2y3yle4u0cks3pplies3y2ort5rf1gery5zuki5v1watch4iss4x1y0dney4stems6z2tab1ipei4lk2obao4rget4tamotors6r2too4x0i3c0i2d0k2eam2ch0nology8l1masek5nnis4va3f1g1h0d1eater2re6iaa2ckets5enda4ps2res2ol4j0maxx4x2k0maxx5l1m0all4n1o0day3kyo3ols3p1ray3shiba5tal3urs3wn2yota3s3r0ade1ing4ining5vel0ers0insurance16ust3v2t1ube2i1nes3shu4v0s2w1z2ua1bank3s2g1k1nicom3versity8o2ol2ps2s1y1z2va0cations7na1guard7c1e0gas3ntures6risign5mögensberater2ung14sicherung10t2g1i0ajes4deo3g1king4llas4n1p1rgin4sa1ion4va1o3laanderen9n1odka3lvo3te1ing3o2yage5u2wales2mart4ter4ng0gou5tch0es6eather0channel12bcam3er2site5d0ding5ibo2r3f1hoswho6ien2ki2lliamhill9n0dows4e1ners6me2oodside6rk0s2ld3w2s1tc1f3xbox3erox4ihuan4n2xx2yz3yachts4hoo3maxun5ndex5e1odobashi7ga2kohama6u0tube6t1un3za0ppos4ra3ero3ip2m1one3uerich6w2`,pRe=`ελ1υ2бг1ел3дети4ею2католик6ом3мкд2он1сква6онлайн5рг3рус2ф2сайт3рб3укр3қаз3հայ3ישראל5קום3ابوظبي5رامكو5لاردن4بحرين5جزائر5سعودية6عليان5مغرب5مارات5یران5بارت2زار4يتك3ھارت5تونس4سودان3رية5شبكة4عراق2ب2مان4فلسطين6قطر3كاثوليك6وم3مصر2ليسيا5وريتانيا7قع4همراه5پاکستان7ڀارت4कॉम3नेट3भारत0म्3ोत5संगठन5বাংলা5ভারত2ৰত4ਭਾਰਤ4ભારત4ଭାରତ4இந்தியா6லங்கை6சிங்கப்பூர்11భారత్5ಭಾರತ4ഭാരതം5ලංකා4คอม3ไทย3ລາວ3გე2みんな3アマゾン4クラウド4グーグル4コム2ストア3セール3ファッション6ポイント4世界2中信1国1國1文网3亚马逊3企业2佛山2信息2健康2八卦2公司1益2台湾1灣2商城1店1标2嘉里0大酒店5在线2大拿2天主教3娱乐2家電2广东2微博2慈善2我爱你3手机2招聘2政务1府2新加坡2闻2时尚2書籍2机构2淡马锡3游戏2澳門2点看2移动2组织机构4网址1店1站1络2联通2谷歌2购物2通販2集团2電訊盈科4飞利浦3食品2餐厅2香格里拉3港2닷넷1컴2삼성2한국2`,K1=`numeric`,q1=`ascii`,J1=`alpha`,Y1=`asciinumeric`,X1=`alphanumeric`,Z1=`domain`,Q1=`emoji`,mRe=`scheme`,hRe=`slashscheme`,$1=`whitespace`;function gRe(e,t){return e in t||(t[e]=[]),t[e]}function e0(e,t,n){t[K1]&&(t[Y1]=!0,t[X1]=!0),t[q1]&&(t[Y1]=!0,t[J1]=!0),t[Y1]&&(t[X1]=!0),t[J1]&&(t[X1]=!0),t[X1]&&(t[Z1]=!0),t[Q1]&&(t[Z1]=!0);for(let r in t){let t=gRe(r,n);t.indexOf(e)<0&&t.push(e)}}function _Re(e,t){let n={};for(let r in t)t[r].indexOf(e)>=0&&(n[r]=!0);return n}function t0(e=null){this.j={},this.jr=[],this.jd=null,this.t=e}t0.groups={},t0.prototype={accepts(){return!!this.t},go(e){let t=this,n=t.j[e];if(n)return n;for(let n=0;n<t.jr.length;n++){let r=t.jr[n][0],i=t.jr[n][1];if(i&&r.test(e))return i}return t.jd},has(e,t=!1){return t?e in this.j:!!this.go(e)},ta(e,t,n,r){for(let i=0;i<e.length;i++)this.tt(e[i],t,n,r)},tr(e,t,n,r){r||=t0.groups;let i;return t&&t.j?i=t:(i=new t0(t),n&&r&&e0(t,n,r)),this.jr.push([e,i]),i},ts(e,t,n,r){let i=this,a=e.length;if(!a)return i;for(let t=0;t<a-1;t++)i=i.tt(e[t]);return i.tt(e[a-1],t,n,r)},tt(e,t,n,r){r||=t0.groups;let i=this;if(t&&t.j)return i.j[e]=t,t;let a=t,o,s=i.go(e);return s?(o=new t0,Object.assign(o.j,s.j),o.jr.push.apply(o.jr,s.jr),o.jd=s.jd,o.t=s.t):o=new t0,a&&(r&&(o.t&&typeof o.t==`string`?e0(a,Object.assign(_Re(o.t,r),n),r):n&&e0(a,n,r)),o.t=a),i.j[e]=o,o}};var n0=(e,t,n,r,i)=>e.ta(t,n,r,i),r0=(e,t,n,r,i)=>e.tr(t,n,r,i),i0=(e,t,n,r,i)=>e.ts(t,n,r,i),a0=(e,t,n,r,i)=>e.tt(t,n,r,i),o0=`WORD`,s0=`UWORD`,c0=`ASCIINUMERICAL`,l0=`ALPHANUMERICAL`,u0=`LOCALHOST`,d0=`TLD`,f0=`UTLD`,p0=`SCHEME`,m0=`SLASH_SCHEME`,h0=`NUM`,g0=`WS`,_0=`NL`,v0=`OPENBRACE`,y0=`CLOSEBRACE`,b0=`OPENBRACKET`,x0=`CLOSEBRACKET`,S0=`OPENPAREN`,C0=`CLOSEPAREN`,w0=`OPENANGLEBRACKET`,T0=`CLOSEANGLEBRACKET`,E0=`FULLWIDTHLEFTPAREN`,D0=`FULLWIDTHRIGHTPAREN`,O0=`LEFTCORNERBRACKET`,k0=`RIGHTCORNERBRACKET`,A0=`LEFTWHITECORNERBRACKET`,j0=`RIGHTWHITECORNERBRACKET`,M0=`FULLWIDTHLESSTHAN`,N0=`FULLWIDTHGREATERTHAN`,P0=`AMPERSAND`,F0=`APOSTROPHE`,I0=`ASTERISK`,L0=`AT`,R0=`BACKSLASH`,z0=`BACKTICK`,B0=`CARET`,V0=`COLON`,H0=`COMMA`,U0=`DOLLAR`,W0=`DOT`,G0=`EQUALS`,K0=`EXCLAMATION`,q0=`HYPHEN`,J0=`PERCENT`,Y0=`PIPE`,X0=`PLUS`,Z0=`POUND`,Q0=`QUERY`,$0=`QUOTE`,e2=`FULLWIDTHMIDDLEDOT`,t2=`SEMI`,n2=`SLASH`,r2=`TILDE`,i2=`UNDERSCORE`,a2=`EMOJI`,o2=`SYM`,s2=Object.freeze({__proto__:null,ALPHANUMERICAL:l0,AMPERSAND:P0,APOSTROPHE:F0,ASCIINUMERICAL:c0,ASTERISK:I0,AT:L0,BACKSLASH:R0,BACKTICK:z0,CARET:B0,CLOSEANGLEBRACKET:T0,CLOSEBRACE:y0,CLOSEBRACKET:x0,CLOSEPAREN:C0,COLON:V0,COMMA:H0,DOLLAR:U0,DOT:W0,EMOJI:a2,EQUALS:G0,EXCLAMATION:K0,FULLWIDTHGREATERTHAN:N0,FULLWIDTHLEFTPAREN:E0,FULLWIDTHLESSTHAN:M0,FULLWIDTHMIDDLEDOT:e2,FULLWIDTHRIGHTPAREN:D0,HYPHEN:q0,LEFTCORNERBRACKET:O0,LEFTWHITECORNERBRACKET:A0,LOCALHOST:u0,NL:_0,NUM:h0,OPENANGLEBRACKET:w0,OPENBRACE:v0,OPENBRACKET:b0,OPENPAREN:S0,PERCENT:J0,PIPE:Y0,PLUS:X0,POUND:Z0,QUERY:Q0,QUOTE:$0,RIGHTCORNERBRACKET:k0,RIGHTWHITECORNERBRACKET:j0,SCHEME:p0,SEMI:t2,SLASH:n2,SLASH_SCHEME:m0,SYM:o2,TILDE:r2,TLD:d0,UNDERSCORE:i2,UTLD:f0,UWORD:s0,WORD:o0,WS:g0}),c2=/[a-z]/,l2=/\p{L}/u,u2=/\p{Emoji}/u,d2=/\d/,f2=/\s/,p2=`\r`,m2=`
+`,vRe=`️`,yRe=`‍`,h2=``,g2=null,_2=null;function bRe(e=[]){let t={};t0.groups=t;let n=new t0;g2??=b2(fRe),_2??=b2(pRe),a0(n,`'`,F0),a0(n,`{`,v0),a0(n,`}`,y0),a0(n,`[`,b0),a0(n,`]`,x0),a0(n,`(`,S0),a0(n,`)`,C0),a0(n,`<`,w0),a0(n,`>`,T0),a0(n,`（`,E0),a0(n,`）`,D0),a0(n,`「`,O0),a0(n,`」`,k0),a0(n,`『`,A0),a0(n,`』`,j0),a0(n,`＜`,M0),a0(n,`＞`,N0),a0(n,`&`,P0),a0(n,`*`,I0),a0(n,`@`,L0),a0(n,"`",z0),a0(n,`^`,B0),a0(n,`:`,V0),a0(n,`,`,H0),a0(n,`$`,U0),a0(n,`.`,W0),a0(n,`=`,G0),a0(n,`!`,K0),a0(n,`-`,q0),a0(n,`%`,J0),a0(n,`|`,Y0),a0(n,`+`,X0),a0(n,`#`,Z0),a0(n,`?`,Q0),a0(n,`"`,$0),a0(n,`/`,n2),a0(n,`;`,t2),a0(n,`~`,r2),a0(n,`_`,i2),a0(n,`\\`,R0),a0(n,`・`,e2);let r=r0(n,d2,h0,{[K1]:!0});r0(r,d2,r);let i=r0(r,c2,c0,{[Y1]:!0}),a=r0(r,l2,l0,{[X1]:!0}),o=r0(n,c2,o0,{[q1]:!0});r0(o,d2,i),r0(o,c2,o),r0(i,d2,i),r0(i,c2,i);let s=r0(n,l2,s0,{[J1]:!0});r0(s,c2),r0(s,d2,a),r0(s,l2,s),r0(a,d2,a),r0(a,c2),r0(a,l2,a);let c=a0(n,m2,_0,{[$1]:!0}),l=a0(n,p2,g0,{[$1]:!0}),u=r0(n,f2,g0,{[$1]:!0});a0(n,h2,u),a0(l,m2,c),a0(l,h2,u),r0(l,f2,u),a0(u,p2),a0(u,m2),r0(u,f2,u),a0(u,h2,u);let d=r0(n,u2,a2,{[Q1]:!0});a0(d,`#`),r0(d,u2,d),a0(d,vRe,d);let f=a0(d,yRe);a0(f,`#`),r0(f,u2,d);let p=[[c2,o],[d2,i]],m=[[c2,null],[l2,s],[d2,a]];for(let e=0;e<g2.length;e++)y2(n,g2[e],d0,o0,p);for(let e=0;e<_2.length;e++)y2(n,_2[e],f0,s0,m);e0(d0,{tld:!0,ascii:!0},t),e0(f0,{utld:!0,alpha:!0},t),y2(n,`file`,p0,o0,p),y2(n,`mailto`,p0,o0,p),y2(n,`http`,m0,o0,p),y2(n,`https`,m0,o0,p),y2(n,`ftp`,m0,o0,p),y2(n,`ftps`,m0,o0,p),e0(p0,{scheme:!0,ascii:!0},t),e0(m0,{slashscheme:!0,ascii:!0},t),e=e.sort((e,t)=>e[0]>t[0]?1:-1);for(let t=0;t<e.length;t++){let r=e[t][0],i=e[t][1]?{[mRe]:!0}:{[hRe]:!0};r.indexOf(`-`)>=0?i[Z1]=!0:c2.test(r)?d2.test(r)?i[Y1]=!0:i[q1]=!0:i[K1]=!0,i0(n,r,r,i)}return i0(n,`localhost`,u0,{ascii:!0}),n.jd=new t0(o2),{start:n,tokens:Object.assign({groups:t},s2)}}function v2(e,t){let n=xRe(t.replace(/[A-Z]/g,e=>e.toLowerCase())),r=n.length,i=[],a=0,o=0;for(;o<r;){let s=e,c=null,l=0,u=null,d=-1,f=-1;for(;o<r&&(c=s.go(n[o]));)s=c,s.accepts()?(d=0,f=0,u=s):d>=0&&(d+=n[o].length,f++),l+=n[o].length,a+=n[o].length,o++;a-=d,o-=f,l-=d,i.push({t:u.t,v:t.slice(a-l,a),s:a-l,e:a})}return i}function xRe(e){let t=[],n=e.length,r=0;for(;r<n;){let i=e.charCodeAt(r),a,o=i<55296||i>56319||r+1===n||(a=e.charCodeAt(r+1))<56320||a>57343?e[r]:e.slice(r,r+2);t.push(o),r+=o.length}return t}function y2(e,t,n,r,i){let a,o=t.length;for(let n=0;n<o-1;n++){let o=t[n];e.j[o]?a=e.j[o]:(a=new t0(r),a.jr=i.slice(),e.j[o]=a),e=a}return a=new t0(n),a.jr=i.slice(),e.j[t[o-1]]=a,a}function b2(e){let t=[],n=[],r=0;for(;r<e.length;){let i=0;for(;`0123456789`.indexOf(e[r+i])>=0;)i++;if(i>0){t.push(n.join(``));for(let t=parseInt(e.substring(r,r+i),10);t>0;t--)n.pop();r+=i}else n.push(e[r]),r++}return t}var x2={defaultProtocol:`http`,events:null,format:C2,formatHref:C2,nl2br:!1,tagName:`a`,target:null,rel:null,validate:!0,truncate:1/0,className:null,attributes:null,ignoreTags:[],render:null};function S2(e,t=null){let n=Object.assign({},x2);e&&(n=Object.assign(n,e instanceof S2?e.o:e));let r=n.ignoreTags,i=[];for(let e=0;e<r.length;e++)i.push(r[e].toUpperCase());this.o=n,t&&(this.defaultRender=t),this.ignoreTags=i}S2.prototype={o:x2,ignoreTags:[],defaultRender(e){return e},check(e){return this.get(`validate`,e.toString(),e)},get(e,t,n){let r=t!=null,i=this.o[e];return i&&(typeof i==`object`?(i=n.t in i?i[n.t]:x2[e],typeof i==`function`&&r&&(i=i(t,n))):typeof i==`function`&&r&&(i=i(t,n.t,n)),i)},getObj(e,t,n){let r=this.o[e];return typeof r==`function`&&t!=null&&(r=r(t,n.t,n)),r},render(e){let t=e.render(this);return(this.get(`render`,null,e)||this.defaultRender)(t,e.t,e)}};function C2(e){return e}function w2(e,t){this.t=`token`,this.v=e,this.tk=t}w2.prototype={isLink:!1,toString(){return this.v},toHref(e){return this.toString()},toFormattedString(e){let t=this.toString(),n=e.get(`truncate`,t,this),r=e.get(`format`,t,this);return n&&r.length>n?r.substring(0,n)+`…`:r},toFormattedHref(e){return e.get(`formatHref`,this.toHref(e.get(`defaultProtocol`)),this)},startIndex(){return this.tk[0].s},endIndex(){return this.tk[this.tk.length-1].e},toObject(e=x2.defaultProtocol){return{type:this.t,value:this.toString(),isLink:this.isLink,href:this.toHref(e),start:this.startIndex(),end:this.endIndex()}},toFormattedObject(e){return{type:this.t,value:this.toFormattedString(e),isLink:this.isLink,href:this.toFormattedHref(e),start:this.startIndex(),end:this.endIndex()}},validate(e){return e.get(`validate`,this.toString(),this)},render(e){let t=this,n=this.toHref(e.get(`defaultProtocol`)),r=e.get(`formatHref`,n,this),i=e.get(`tagName`,n,t),a=this.toFormattedString(e),o={},s=e.get(`className`,n,t),c=e.get(`target`,n,t),l=e.get(`rel`,n,t),u=e.getObj(`attributes`,n,t),d=e.getObj(`events`,n,t);return o.href=r,s&&(o.class=s),c&&(o.target=c),l&&(o.rel=l),u&&Object.assign(o,u),{tagName:i,attributes:o,content:a,eventListeners:d}}};function T2(e,t){class n extends w2{constructor(t,n){super(t,n),this.t=e}}for(let e in t)n.prototype[e]=t[e];return n.t=e,n}var SRe=T2(`email`,{isLink:!0,toHref(){return`mailto:`+this.toString()}}),E2=T2(`text`),CRe=T2(`nl`),D2=T2(`url`,{isLink:!0,toHref(e=x2.defaultProtocol){return this.hasProtocol()?this.v:`${e}://${this.v}`},hasProtocol(){let e=this.tk;return e.length>=2&&e[0].t!==u0&&e[1].t===V0}}),O2=e=>new t0(e);function wRe({groups:e}){let t=e.domain.concat([P0,I0,L0,R0,z0,B0,U0,G0,q0,h0,J0,Y0,X0,Z0,n2,o2,r2,i2]),n=[F0,V0,H0,W0,K0,J0,Q0,$0,t2,w0,T0,v0,y0,x0,b0,S0,C0,E0,D0,O0,k0,A0,j0,M0,N0],r=[P0,F0,I0,R0,z0,B0,U0,G0,q0,v0,y0,J0,Y0,X0,Z0,Q0,n2,o2,r2,i2],i=O2(),a=a0(i,r2);n0(a,r,a),n0(a,e.domain,a);let o=O2(),s=O2(),c=O2();n0(i,e.domain,o),n0(i,e.scheme,s),n0(i,e.slashscheme,c),n0(o,r,a),n0(o,e.domain,o);let l=a0(o,L0);a0(a,L0,l),a0(s,L0,l),a0(c,L0,l);let u=a0(a,W0);n0(u,r,a),n0(u,e.domain,a);let d=O2();n0(l,e.domain,d),n0(d,e.domain,d);let f=a0(d,W0);n0(f,e.domain,d);let p=O2(SRe);n0(f,e.tld,p),n0(f,e.utld,p),a0(l,u0,p);let m=a0(d,q0);a0(m,q0,m),n0(m,e.domain,d),n0(p,e.domain,d),a0(p,W0,f),a0(p,q0,m);let h=a0(o,q0),g=a0(o,W0);a0(h,q0,h),n0(h,e.domain,o),n0(g,r,a),n0(g,e.domain,o);let _=O2(D2);n0(g,e.tld,_),n0(g,e.utld,_),n0(_,e.domain,o),n0(_,r,a),a0(_,W0,g),a0(_,q0,h),a0(_,L0,l);let v=a0(_,V0),y=O2(D2);n0(v,e.numeric,y);let b=O2(D2),x=O2();n0(b,t,b),n0(b,n,x),n0(x,t,b),n0(x,n,x),a0(_,n2,b),a0(y,n2,b);let S=a0(s,V0),C=a0(a0(a0(c,V0),n2),n2);n0(s,e.domain,o),a0(s,W0,g),a0(s,q0,h),n0(c,e.domain,o),a0(c,W0,g),a0(c,q0,h),n0(S,e.domain,b),a0(S,n2,b),a0(S,Q0,b),n0(C,e.domain,b),n0(C,t,b),a0(C,n2,b);let w=[[v0,y0],[b0,x0],[S0,C0],[w0,T0],[E0,D0],[O0,k0],[A0,j0],[M0,N0]];for(let e=0;e<w.length;e++){let[r,i]=w[e],a=a0(b,r);a0(x,r,a);let o=O2(D2);n0(a,t,o);let s=O2();n0(a,n,s),a0(a,i,b),n0(o,t,o),n0(o,n,s),n0(s,t,o),n0(s,n,s),a0(o,i,b),a0(s,i,b)}return a0(i,u0,_),a0(i,_0,CRe),{start:i,tokens:s2}}function TRe(e,t,n){let r=n.length,i=0,a=[],o=[];for(;i<r;){let s=e,c=null,l=null,u=0,d=null,f=-1;for(;i<r&&!(c=s.go(n[i].t));)o.push(n[i++]);for(;i<r&&(l=c||s.go(n[i].t));)c=null,s=l,s.accepts()?(f=0,d=s):f>=0&&f++,i++,u++;if(f<0)i-=u,i<r&&(o.push(n[i]),i++);else{o.length>0&&(a.push(k2(E2,t,o)),o=[]),i-=f,u-=f;let e=d.t,r=n.slice(i-u,i);a.push(k2(e,t,r))}}return o.length>0&&a.push(k2(E2,t,o)),a}function k2(e,t,n){let r=n[0].s,i=n[n.length-1].e;return new e(t.slice(r,i),n)}var ERe=typeof console<`u`&&console&&console.warn||(()=>{}),DRe=`until manual call of linkify.init(). Register all schemes and plugins before invoking linkify the first time.`,A2={scanner:null,parser:null,tokenQueue:[],pluginQueue:[],customSchemes:[],initialized:!1};function ORe(){return t0.groups={},A2.scanner=null,A2.parser=null,A2.tokenQueue=[],A2.pluginQueue=[],A2.customSchemes=[],A2.initialized=!1,A2}function j2(e,t=!1){if(A2.initialized&&ERe(`linkifyjs: already initialized - will not register custom scheme "${e}" ${DRe}`),!/^[0-9a-z]+(-[0-9a-z]+)*$/.test(e))throw Error(`linkifyjs: incorrect scheme format.
 1. Must only contain digits, lowercase ASCII letters or "-"
 2. Cannot start or end with "-"
-3. "-" cannot repeat`);D2.customSchemes.push([e,t])}function ORe(){D2.scanner=yRe(D2.customSchemes);for(let e=0;e<D2.tokenQueue.length;e++)D2.tokenQueue[e][1]({scanner:D2.scanner});D2.parser=CRe(D2.scanner.tokens);for(let e=0;e<D2.pluginQueue.length;e++)D2.pluginQueue[e][1]({scanner:D2.scanner,parser:D2.parser});return D2.initialized=!0,D2}function k2(e){return D2.initialized||ORe(),wRe(D2.parser.start,e,h2(D2.scanner.start,e))}k2.scan=h2;function A2(e,t=null,n=null){if(t&&typeof t==`object`){if(n)throw Error(`linkifyjs: Invalid link type ${t}; must be a string`);n=t,t=null}let r=new y2(n),i=k2(e),a=[];for(let e=0;e<i.length;e++){let n=i[e];n.isLink&&(!t||n.t===t)&&r.check(n)&&a.push(n.toFormattedObject(r))}return a}var j2=`[\0- \xA0 ᠎ -\u2029 　]`,kRe=new RegExp(j2),ARe=RegExp(`${j2}$`),jRe=new RegExp(j2,`g`);function MRe(e){return e.length===1?e[0].isLink:e.length===3&&e[1].isLink?[`()`,`[]`].includes(e[0].value+e[2].value):!1}function NRe(e){return new dY({key:new mY(`autolink`),appendTransaction:(t,n,r)=>{let i=t.some(e=>e.docChanged)&&!n.doc.eq(r.doc),a=t.some(e=>e.getMeta(`preventAutolink`));if(!i||a)return;let{tr:o}=r;if(T$(a$(n.doc,[...t])).forEach(({newRange:t})=>{let n=uFe(r.doc,t,e=>e.isTextblock),i,a;if(n.length>1)i=n[0],a=r.doc.textBetween(i.pos,i.pos+i.node.nodeSize,void 0,` `);else if(n.length){let e=r.doc.textBetween(t.from,t.to,` `,` `);if(!ARe.test(e))return;i=n[0],a=r.doc.textBetween(i.pos,t.to,void 0,` `)}if(i&&a){let t=a.split(kRe).filter(Boolean);if(t.length<=0)return!1;let n=t[t.length-1],s=i.pos+a.lastIndexOf(n);if(!n)return!1;let c=k2(n).map(t=>t.toObject(e.defaultProtocol));if(!MRe(c))return!1;c.filter(e=>e.isLink).map(e=>({...e,from:s+e.start+1,to:s+e.end+1})).filter(e=>r.schema.marks.code?!r.doc.rangeHasMark(e.from,e.to,r.schema.marks.code):!0).filter(t=>e.validate(t.value)).filter(t=>e.shouldAutoLink(t.value)).forEach(t=>{E$(t.from,t.to,r.doc).some(t=>t.mark.type===e.type)||o.addMark(t.from,t.to,e.type.create({href:t.href}))})}}),o.steps.length)return o}})}function PRe(e){return new dY({key:new mY(`handleClickLink`),props:{handleClick:(t,n,r)=>{if(r.button!==0||!t.editable)return!1;let i=null;if(r.target instanceof HTMLAnchorElement)i=r.target;else{let t=r.target;if(!t)return!1;let n=e.editor.view.dom;i=t.closest(`a`),i&&!n.contains(i)&&(i=null)}if(!i)return!1;let a=!1;if(e.enableClickSelection&&(a=e.editor.commands.extendMarkRange(e.type.name)),e.openOnClick){let n=w$(t.state,e.type.name),r=i.href??n.href,o=i.target??n.target;r&&(window.open(r,o),a=!0)}return a}}})}var FRe=/\[([^[\]]+)\]\(((?:[^\s()]|\([^\s()]*\))+)(?:\s+(?:(["'])(.*?)\3|“(.*?)”|‘(.*?)’))?\)$/,IRe=/\[([^[\]]+)\]\(((?:[^\s()]|\([^\s()]*\))+)(?:\s+(?:(["'])(.*?)\3|“(.*?)”|‘(.*?)’))?\)/g;function M2(e,t){let n=0;for(let r=t-1;r>=0&&e[r]===`\\`;--r)n+=1;return n%2==1}function LRe(e,t){let n=0,r=0;for(;r<t;){if(e[r]!=="`"){r+=1;continue}if(n===0&&M2(e,r)){r+=1;continue}let i=0;for(;r<t&&e[r]==="`";)i+=1,r+=1;n===0?n=i:i===n&&(n=0)}return n>0}function N2(e,t,n){let[,r,i]=t;return(t.index?e[t.index-1]:void 0)===`!`||M2(e,t.index??0)||LRe(e,t.index??0)?!1:!!r.trim()&&n(i)}function P2(e){let[t,n,r,,i,a,o]=e,s=i??a??o;return{index:e.index??0,text:t,replaceWith:n,data:{href:r,title:s||null,markdown:!0}}}function RRe(e,t){return e.index<t.index+t.text.length&&t.index<e.index+e.text.length}function F2(e){return{href:e.data?.href,title:e.data?.title??null}}function zRe(e){let t=f1({find:t=>{let n=FRe.exec(t);return!n||!N2(t,n,e.isAllowedHref)?null:P2(n)},type:e.type,getAttributes:F2});return new r1({find:t.find,handler:e=>{let n=t.handler(e);return n!==null&&e.state.tr.steps.length&&e.state.tr.setMeta(`preventAutolink`,!0),n}})}function BRe(e){let t=_1({find:t=>{let n=[];for(let r of t.matchAll(IRe))N2(t,r,e.isAllowedHref)&&n.push(P2(r));let r=(e.findPlainUrls?.call(e,t)??[]).filter(e=>!n.some(t=>RRe(t,e)));return[...n,...r]},type:e.type,getAttributes:F2});return new s1({find:t.find,handler:e=>{let n=t.handler(e);return n!==null&&e.state.tr.steps.length&&e.match.data?.markdown&&e.state.tr.setMeta(`preventAutolink`,!0),n}})}function VRe(e){return new dY({key:new mY(`handlePasteLink`),props:{handlePaste:(t,n,r)=>{let{shouldAutoLink:i}=e,{state:a}=t,{selection:o}=a,{empty:s}=o;if(s)return!1;let c=``;r.content.forEach(e=>{c+=e.textContent});let l=A2(c,{defaultProtocol:e.defaultProtocol}).find(e=>e.isLink&&e.value===c);return!c||!l||i!==void 0&&!i(l.value)?!1:e.editor.commands.setMark(e.type,{href:l.href})}}})}function I2(e,t){let n=[`http`,`https`,`ftp`,`ftps`,`mailto`,`tel`,`callto`,`sms`,`cid`,`xmpp`];return t&&t.forEach(e=>{let t=typeof e==`string`?e:e.scheme;t&&n.push(t)}),!e||e.replace(jRe,``).match(RegExp(`^(?:(?:${n.map(e=>e.replace(/[-/\\^$*+?.()|[\]{}]/g,`\\$&`)).join(`|`)}):|[^a-z]|[a-z0-9+.\\-]+(?:[^a-z+.\\-:]|$))`,`i`))}var L2=o1.create({name:`link`,priority:1e3,keepOnSplit:!1,exitable:!0,onCreate(){this.options.validate&&!this.options.shouldAutoLink&&(this.options.shouldAutoLink=this.options.validate,console.warn("The `validate` option is deprecated. Rename to the `shouldAutoLink` option instead.")),this.options.protocols.forEach(e=>{if(typeof e==`string`){O2(e);return}O2(e.scheme,e.optionalSlashes)})},onDestroy(){DRe()},inclusive(){return this.options.autolink},addOptions(){return{openOnClick:!0,enableClickSelection:!1,linkOnPaste:!0,markdownLinks:!1,autolink:!0,protocols:[],defaultProtocol:`http`,HTMLAttributes:{target:`_blank`,rel:`noopener noreferrer nofollow`,class:null},isAllowedUri:(e,t)=>!!I2(e,t.protocols),validate:e=>!!e,shouldAutoLink:e=>{let t=/^[a-z][a-z0-9+.-]*:\/\//i.test(e),n=/^[a-z][a-z0-9+.-]*:/i.test(e);if(t||n&&!e.includes(`@`))return!0;let r=(e.includes(`@`)?e.split(`@`).pop():e).split(/[/?#:]/)[0];return!(/^\d{1,3}(\.\d{1,3}){3}$/.test(r)||!/\./.test(r))}}},addAttributes(){return{href:{default:null,parseHTML(e){return e.getAttribute(`href`)}},target:{default:this.options.HTMLAttributes.target??null},rel:{default:this.options.HTMLAttributes.rel??null},class:{default:this.options.HTMLAttributes.class??null},title:{default:null}}},parseHTML(){return[{tag:`a[href]`,getAttrs:e=>{let t=e.getAttribute(`href`);return!t||!this.options.isAllowedUri(t,{defaultValidate:e=>!!I2(e,this.options.protocols),protocols:this.options.protocols,defaultProtocol:this.options.defaultProtocol})?!1:null}}]},renderHTML({HTMLAttributes:e}){return this.options.isAllowedUri(e.href,{defaultValidate:e=>!!I2(e,this.options.protocols),protocols:this.options.protocols,defaultProtocol:this.options.defaultProtocol})?[`a`,h$(this.options.HTMLAttributes,e),0]:[`a`,h$(this.options.HTMLAttributes,{...e,href:``}),0]},markdownTokenName:`link`,parseMarkdown:(e,t)=>t.applyMark(`link`,t.parseInline(e.tokens||[]),{href:e.href,title:e.title||null}),renderMarkdown:(e,t)=>{let n=e.attrs?.href??``,r=e.attrs?.title??``,i=t.renderChildren(e);return r?`[${i}](${n} "${r}")`:`[${i}](${n})`},addCommands(){return{setLink:e=>({chain:t})=>{let{href:n}=e;return this.options.isAllowedUri(n,{defaultValidate:e=>!!I2(e,this.options.protocols),protocols:this.options.protocols,defaultProtocol:this.options.defaultProtocol})?t().setMark(this.name,e).setMeta(`preventAutolink`,!0).run():!1},toggleLink:e=>({chain:t})=>{let{href:n}=e||{};return n&&!this.options.isAllowedUri(n,{defaultValidate:e=>!!I2(e,this.options.protocols),protocols:this.options.protocols,defaultProtocol:this.options.defaultProtocol})?!1:t().toggleMark(this.name,e,{extendEmptyMarkRange:!0}).setMeta(`preventAutolink`,!0).run()},unsetLink:()=>({chain:e})=>e().unsetMark(this.name,{extendEmptyMarkRange:!0}).setMeta(`preventAutolink`,!0).run()}},addInputRules(){return this.options.markdownLinks?[zRe({type:this.type,isAllowedHref:e=>this.options.isAllowedUri(e,{defaultValidate:e=>!!I2(e,this.options.protocols),protocols:this.options.protocols,defaultProtocol:this.options.defaultProtocol})})]:[]},addPasteRules(){let e=e=>{let t=[];if(e){let{protocols:n,defaultProtocol:r}=this.options;A2(e).filter(e=>e.isLink&&this.options.isAllowedUri(e.value,{defaultValidate:e=>!!I2(e,n),protocols:n,defaultProtocol:r})).forEach(e=>{this.options.shouldAutoLink(e.value)&&t.push({text:e.value,data:{href:e.href},index:e.start})})}return t};return this.options.markdownLinks?[BRe({type:this.type,isAllowedHref:e=>this.options.isAllowedUri(e,{defaultValidate:e=>!!I2(e,this.options.protocols),protocols:this.options.protocols,defaultProtocol:this.options.defaultProtocol}),findPlainUrls:e})]:[_1({find:e,type:this.type,getAttributes:e=>({href:e.data?.href})})]},addProseMirrorPlugins(){let e=[],{protocols:t,defaultProtocol:n}=this.options;return this.options.autolink&&e.push(NRe({type:this.type,defaultProtocol:this.options.defaultProtocol,validate:e=>this.options.isAllowedUri(e,{defaultValidate:e=>!!I2(e,t),protocols:t,defaultProtocol:n}),shouldAutoLink:this.options.shouldAutoLink})),e.push(PRe({type:this.type,editor:this.editor,openOnClick:this.options.openOnClick===`whenNotEditable`?!0:this.options.openOnClick,enableClickSelection:this.options.enableClickSelection})),this.options.linkOnPaste&&e.push(VRe({editor:this.editor,defaultProtocol:this.options.defaultProtocol,type:this.type,shouldAutoLink:this.options.shouldAutoLink})),e}}),HRe=L2,URe=`listItem`,R2=`textStyle`,z2=/^\s*([-+*])\s$/,B2=g1.create({name:`bulletList`,addOptions(){return{itemTypeName:`listItem`,HTMLAttributes:{},keepMarks:!1,keepAttributes:!1}},group:`block list`,content(){return`${this.options.itemTypeName}+`},parseHTML(){return[{tag:`ul`}]},renderHTML({HTMLAttributes:e}){return[`ul`,h$(this.options.HTMLAttributes,e),0]},markdownTokenName:`list`,parseMarkdown:(e,t)=>e.type!==`list`||e.ordered?[]:{type:`bulletList`,content:e.items?t.parseChildren(e.items):[]},renderMarkdown:(e,t)=>e.content?t.renderChildren(e.content,`
-`):``,markdownOptions:{indentsContent:!0},addCommands(){return{toggleBulletList:()=>({commands:e,chain:t})=>this.options.keepAttributes?t().toggleList(this.name,this.options.itemTypeName,this.options.keepMarks).updateAttributes(URe,this.editor.getAttributes(R2)).run():e.toggleList(this.name,this.options.itemTypeName,this.options.keepMarks)}},addKeyboardShortcuts(){return{"Mod-Shift-8":()=>this.editor.commands.toggleBulletList()}},addInputRules(){let e=h1({find:z2,type:this.type});return(this.options.keepMarks||this.options.keepAttributes)&&(e=h1({find:z2,type:this.type,keepMarks:this.options.keepMarks,keepAttributes:this.options.keepAttributes,getAttributes:()=>this.editor.getAttributes(R2),editor:this.editor})),[e]}}),WRe=(e,t,n)=>{let{selection:r}=e;if(!r.empty)return null;let{$from:i}=r;if(!i.parent.isTextblock||i.parentOffset!==i.parent.content.size)return null;let a=-1;for(let e=i.depth;e>0;--e)if(i.node(e).type.name===t){a=e;break}if(a<0)return null;let o=i.node(a),s=i.index(a);if(s+1>=o.childCount)return null;let c=o.child(s+1);if(!n.includes(c.type.name))return null;let l=e.schema.nodes[t],u=!1;if(c.forEach(e=>{e.type===l&&e.childCount>1&&(u=!0)}),!u)return null;let d=e.doc.resolve(i.after()).nodeAfter;if(!d||!n.includes(d.type.name))return null;let f=[];return d.forEach(e=>{f.push(e)}),f.length===0?null:{listItemDepth:a,nestedList:d,nestedListPos:i.after(),insertPos:i.after(a),items:f}},GRe=(e,t,n,r)=>{let i=WRe(e,n,r);if(!i)return!1;let{selection:a}=e,{nestedList:o,nestedListPos:s,insertPos:c,items:l}=i,u=e.tr;u.delete(s,s+o.nodeSize);let d=u.mapping.map(c);return u.insert(d,oq.from(l)),u.setSelection(a.map(u.doc,u.mapping)),t&&t(u),!0},KRe=(e,t,n)=>GRe(e.state,e.view.dispatch,t,n),V2=(e,t)=>u1.create({name:`${e}BranchingDeleteKeymap`,priority:101,addKeyboardShortcuts(){let n=()=>KRe(this.editor,e,t);return{Delete:n,"Mod-Delete":n}}}),H2=[[1e3,`m`],[900,`cm`],[500,`d`],[400,`cd`],[100,`c`],[90,`xc`],[50,`l`],[40,`xl`],[10,`x`],[9,`ix`],[5,`v`],[4,`iv`],[1,`i`]],U2=`abcdefghijklmnopqrstuvwxyz`,W2=String.raw`\d+|[ivxlcdmIVXLCDM]+|${`[a-zA-Z]{1,2}`}`;function G2(e){let t=e,n=``;for(let[e,r]of H2)for(;t>=e;)n+=r,t-=e;return n}function K2(e){return G2(e).toUpperCase()}function q2(e){let t=e.toLowerCase(),n=0,r=0;for(;n<t.length;){let e=!1;for(let[i,a]of H2)if(t.startsWith(a,n)){r+=i,n+=a.length,e=!0;break}if(!e)return 0}return r}function qRe(e){if(!/^[ivxlcdmIVXLCDM]+$/.test(e))return!1;let t=q2(e);return t<=0?!1:(e===e.toLowerCase()?G2(t):K2(t))===e}function JRe(e){let t=e.toLowerCase();if(t.length===1)return t.charCodeAt(0)-97+1;if(t.length===2){let e=t.charCodeAt(0)-97,n=t.charCodeAt(1)-97;return(e+1)*26+n+1}return 0}function J2(e){if(e<=26)return U2[e-1];let t=Math.floor((e-1)/26)-1,n=(e-1)%26;return t<0?U2[n]:U2[t]+U2[n]}function Y2(e){if(!(!e||/^\d+$/.test(e))){if(qRe(e))return e===e.toLowerCase()?`i`:`I`;if(/^[a-z]{1,2}$/.test(e))return`a`;if(/^[A-Z]{1,2}$/.test(e))return`A`}}function X2(e){if(/^\d+$/.test(e))return parseInt(e,10);let t=Y2(e);if(t===`i`||t===`I`)return q2(e);if(t===`a`||t===`A`){let t=JRe(e);return t>0?t:1}let n=parseInt(e,10);return Number.isNaN(n)?1:n}function YRe(e,t){if(e===`numeric`)return String(t);switch(e){case`a`:return J2(t);case`A`:return J2(t).toUpperCase();case`i`:return G2(t);case`I`:return K2(t);default:return String(t)}}function XRe(e){if(e.length===0)return!1;let t=Y2(e[0])??`numeric`,n=X2(e[0]);if(n<1)return!1;for(let r=0;r<e.length;r++){let i=YRe(t,n+r);if(e[r]!==i)return!1}return!0}function ZRe(e){return{type:Y2(e),start:X2(e)}}function QRe(e){let{type:t,start:n}=ZRe(e),r={};return t&&(r.type=t),n!==1&&(r.start=n),r}function $Re(e,t,n=`. `){let r=t+1;if(!e||e===`1`)return`${r}${n}`;switch(e){case`a`:return`${J2(r)}${n}`;case`A`:return`${J2(r).toUpperCase()}${n}`;case`i`:return`${G2(r)}${n}`;case`I`:return`${K2(r)}${n}`;default:return`${r}${n}`}}function eze(e){let t=e.tokens?.[0];return!!(e.text&&e.tokens?.length===1&&t?.type===`list`&&t.ordered&&t.raw===e.text)}function tze(e,t){return t.tokenizeInline?t.parseInline(t.tokenizeInline(e)):t.parseInline([{type:`text`,raw:e,text:e}])}var Z2=g1.create({name:`listItem`,addOptions(){return{HTMLAttributes:{},bulletListTypeName:`bulletList`,orderedListTypeName:`orderedList`}},content:`paragraph block*`,defining:!0,parseHTML(){return[{tag:`li`}]},renderHTML({HTMLAttributes:e}){return[`li`,h$(this.options.HTMLAttributes,e),0]},markdownTokenName:`list_item`,parseMarkdown:(e,t)=>{if(e.type!==`list_item`)return[];let n=t.parseBlockChildren??t.parseChildren,r=[];if(e.tokens&&e.tokens.length>0){if(eze(e))return{type:`listItem`,content:[{type:`paragraph`,content:tze(e.text||``,t)}]};if(e.tokens.some(e=>e.type===`paragraph`))r=n(e.tokens);else{let i=e.tokens[0];if(i&&i.type===`text`&&i.tokens&&i.tokens.length>0){if(r=[{type:`paragraph`,content:t.parseInline(i.tokens)}],e.tokens.length>1){let t=n(e.tokens.slice(1));r.push(...t)}}else r=n(e.tokens)}}return r.length===0&&(r=[{type:`paragraph`,content:[]}]),{type:`listItem`,content:r}},renderMarkdown:(e,t,n)=>t1(e,t,e=>{if(e.parentType===`bulletList`)return`- `;if(e.parentType===`orderedList`){var t,n;let r=((t=e.meta)==null||(t=t.parentAttrs)==null?void 0:t.start)||1;return $Re((n=e.meta)==null||(n=n.parentAttrs)==null?void 0:n.type,r-1+(e.index||0),`. `)}return`- `},n,{alignNestedToPrefix:n?.parentType===`orderedList`}),addExtensions(){return[V2(this.name,[this.options.bulletListTypeName,this.options.orderedListTypeName])]},addKeyboardShortcuts(){return{Enter:()=>this.editor.commands.splitListItem(this.name),Tab:()=>this.editor.commands.sinkListItem(this.name),"Shift-Tab":()=>this.editor.commands.liftListItem(this.name)}}}),Q2=(e,t)=>{let{$from:n}=t.selection,r=NQ(e,t.schema),i=null,a=n.depth,o=n.pos,s=null;for(;a>0&&s===null;)i=n.node(a),i.type===r?s=a:(--a,--o);return s===null?null:{$pos:t.doc.resolve(o),depth:s}},$2=(e,t)=>{let n=Q2(e,t);if(!n)return!1;let[,r]=xFe(t,e,n.$pos.pos+4);return r},nze=(e,t,n)=>{let{$anchor:r}=e.selection,i=Math.max(0,r.pos-2),a=e.doc.resolve(i).node();return!(!a||!n.includes(a.type.name))},e4=(e,t,n)=>{if(e.commands.undoInputRule())return!0;if(e.state.selection.from!==e.state.selection.to)return!1;if(!e$(e.state,t)&&nze(e.state,t,n)){let{$anchor:n}=e.state.selection,r=e.state.doc.resolve(n.before()-1),i=[];r.node().descendants((e,n)=>{e.type.name===t&&i.push({node:e,pos:n})});let a=i.at(-1);if(!a)return!1;let o=e.state.doc.resolve(r.start()+a.pos+1);return e.chain().cut({from:n.start()-1,to:n.end()+1},o.end()).joinForward().run()}if(!e$(e.state,t)||!EFe(e.state))return!1;let{$from:r}=e.state.selection,i=r.depth-1;return r.node(i).type!==e.schema.nodes[t]||r.index(i)!==0?!1:e.chain().liftListItem(t).run()},rze=(e,t)=>{let n=$2(e,t),r=Q2(e,t);return!r||!n?!1:n>r.depth},ize=(e,t)=>{let n=$2(e,t),r=Q2(e,t);return!r||!n?!1:n<r.depth},t4=(e,t)=>{if(!e$(e.state,t)||!TFe(e.state,t))return!1;let{selection:n}=e.state,{$from:r,$to:i}=n;return!n.empty&&r.sameParent(i)?!1:rze(t,e.state)?e.chain().focus(e.state.selection.from+4).lift(t).joinBackward().run():ize(t,e.state)?e.chain().joinForward().joinBackward().run():e.commands.joinItemForward()},aze=(e,t,n)=>{let{state:r}=e,{selection:i}=r;if(!i.empty)return!1;let{$from:a}=i;if(a.parentOffset!==0||!a.parent.isTextblock||e$(r,t))return!1;let o=SFe(a);if(!o||!n.includes(o.type.name))return!1;let s=o.lastChild;if(!s||s.type.name!==t)return!1;let c=a.parent;if(!s.canReplace(s.childCount,s.childCount,oq.from(c)))return!1;let l=a.before(),u=a.after(),d=l-2;return e.commands.command(({tr:e,dispatch:t})=>(t&&(e.delete(l,u).insert(d,oq.from(c)),e.setSelection(ZJ.create(e.doc,d+1)),e.scrollIntoView()),!0))},n4=u1.create({name:`listKeymap`,addOptions(){return{listTypes:[{itemName:`listItem`,wrapperNames:[`bulletList`,`orderedList`]},{itemName:`taskItem`,wrapperNames:[`taskList`]}]}},addKeyboardShortcuts(){return{Delete:({editor:e})=>{let t=!1;return this.options.listTypes.forEach(({itemName:n})=>{e.state.schema.nodes[n]!==void 0&&t4(e,n)&&(t=!0)}),t},"Mod-Delete":({editor:e})=>{let t=!1;return this.options.listTypes.forEach(({itemName:n})=>{e.state.schema.nodes[n]!==void 0&&t4(e,n)&&(t=!0)}),t},Backspace:({editor:e})=>{let t=!1;return this.options.listTypes.forEach(({itemName:n,wrapperNames:r})=>{e.state.schema.nodes[n]!==void 0&&e4(e,n,r)&&(t=!0)}),t},"Mod-Backspace":({editor:e})=>{let t=!1;return this.options.listTypes.forEach(({itemName:n,wrapperNames:r})=>{e.state.schema.nodes[n]!==void 0&&e4(e,n,r)&&(t=!0)}),t},Tab:({editor:e})=>{for(let{itemName:t,wrapperNames:n}of this.options.listTypes)if(e.state.schema.nodes[t]!==void 0&&aze(e,t,n))return!0;return!1}}}}),r4=RegExp(`^(\\s*)(${W2})([.)])\\s+(.*)$`),oze=/^\s/,i4={heading:/^#{1,6}(?:\s|$)/,bulletItem:/^[-+*]\s+/,codeFence:/^(?:```|~~~)/,blockMath:/^\$\$/,thematicBreak:/^(?:(?:-[ \t]*){3,}|(?:_[ \t]*){3,}|(?:\*[ \t]*){3,})$/};function sze(e){return r4.test(e.trimStart())}function cze(e){let t=e.trimStart();return i4.bulletItem.test(t)||sze(t)||i4.heading.test(t)||i4.thematicBreak.test(t)&&!t.startsWith(`-`)||/^>\s?/.test(t)||i4.codeFence.test(t)||i4.blockMath.test(t)}function lze(e){return Object.values(i4).some(t=>t.test(e))}function uze(e){let t=[],n=[],r=!1;return e.forEach(e=>{if(r){n.push(e);return}if(e.trim()===``){r=!0,n.push(e);return}if(t.length>0&&cze(e)){r=!0,n.push(e);return}t.push(e)}),{paragraphLines:t,blockLines:n}}function dze(e){let t=[],n=0,r=0;for(;n<e.length;){let i=e[n],a=i.match(r4);if(!a)break;let[,o,s,c,l]=a,u=o.length,d=parseInt(s,10),f=isNaN(d)?Y2(s):void 0,p=isNaN(d)?X2(s):d,m=[l],h=n+1,g=[i],_=!1;for(;h<e.length;){let t=e[h];if(t.match(r4))break;if(t.trim()===``)g.push(t),m.push(``),_=!0,h+=1;else if(t.match(oze)){let e=t.length-t.trimStart().length,n=u+s.length+1;g.push(t),m.push(t.slice(Math.min(e,n))),h+=1}else{if(_||lze(t))break;g.push(t),m.push(t),h+=1}}t.push({indent:u,number:p,type:f,content:m.join(`
+3. "-" cannot repeat`);A2.customSchemes.push([e,t])}function kRe(){A2.scanner=bRe(A2.customSchemes);for(let e=0;e<A2.tokenQueue.length;e++)A2.tokenQueue[e][1]({scanner:A2.scanner});A2.parser=wRe(A2.scanner.tokens);for(let e=0;e<A2.pluginQueue.length;e++)A2.pluginQueue[e][1]({scanner:A2.scanner,parser:A2.parser});return A2.initialized=!0,A2}function M2(e){return A2.initialized||kRe(),TRe(A2.parser.start,e,v2(A2.scanner.start,e))}M2.scan=v2;function N2(e,t=null,n=null){if(t&&typeof t==`object`){if(n)throw Error(`linkifyjs: Invalid link type ${t}; must be a string`);n=t,t=null}let r=new S2(n),i=M2(e),a=[];for(let e=0;e<i.length;e++){let n=i[e];n.isLink&&(!t||n.t===t)&&r.check(n)&&a.push(n.toFormattedObject(r))}return a}var P2=`[\0- \xA0 ᠎ -\u2029 　]`,ARe=new RegExp(P2),jRe=RegExp(`${P2}$`),MRe=new RegExp(P2,`g`);function NRe(e){return e.length===1?e[0].isLink:e.length===3&&e[1].isLink?[`()`,`[]`].includes(e[0].value+e[2].value):!1}function PRe(e){return new mY({key:new _Y(`autolink`),appendTransaction:(t,n,r)=>{let i=t.some(e=>e.docChanged)&&!n.doc.eq(r.doc),a=t.some(e=>e.getMeta(`preventAutolink`));if(!i||a)return;let{tr:o}=r;if(O$(c$(n.doc,[...t])).forEach(({newRange:t})=>{let n=dFe(r.doc,t,e=>e.isTextblock),i,a;if(n.length>1)i=n[0],a=r.doc.textBetween(i.pos,i.pos+i.node.nodeSize,void 0,` `);else if(n.length){let e=r.doc.textBetween(t.from,t.to,` `,` `);if(!jRe.test(e))return;i=n[0],a=r.doc.textBetween(i.pos,t.to,void 0,` `)}if(i&&a){let t=a.split(ARe).filter(Boolean);if(t.length<=0)return!1;let n=t[t.length-1],s=i.pos+a.lastIndexOf(n);if(!n)return!1;let c=M2(n).map(t=>t.toObject(e.defaultProtocol));if(!NRe(c))return!1;c.filter(e=>e.isLink).map(e=>({...e,from:s+e.start+1,to:s+e.end+1})).filter(e=>r.schema.marks.code?!r.doc.rangeHasMark(e.from,e.to,r.schema.marks.code):!0).filter(t=>e.validate(t.value)).filter(t=>e.shouldAutoLink(t.value)).forEach(t=>{k$(t.from,t.to,r.doc).some(t=>t.mark.type===e.type)||o.addMark(t.from,t.to,e.type.create({href:t.href}))})}}),o.steps.length)return o}})}function FRe(e){return new mY({key:new _Y(`handleClickLink`),props:{handleClick:(t,n,r)=>{if(r.button!==0||!t.editable)return!1;let i=null;if(r.target instanceof HTMLAnchorElement)i=r.target;else{let t=r.target;if(!t)return!1;let n=e.editor.view.dom;i=t.closest(`a`),i&&!n.contains(i)&&(i=null)}if(!i)return!1;let a=!1;if(e.enableClickSelection&&(a=e.editor.commands.extendMarkRange(e.type.name)),e.openOnClick){let n=D$(t.state,e.type.name),r=i.href??n.href,o=i.target??n.target;r&&(window.open(r,o),a=!0)}return a}}})}var IRe=/\[([^[\]]+)\]\(((?:[^\s()]|\([^\s()]*\))+)(?:\s+(?:(["'])(.*?)\3|“(.*?)”|‘(.*?)’))?\)$/,LRe=/\[([^[\]]+)\]\(((?:[^\s()]|\([^\s()]*\))+)(?:\s+(?:(["'])(.*?)\3|“(.*?)”|‘(.*?)’))?\)/g;function F2(e,t){let n=0;for(let r=t-1;r>=0&&e[r]===`\\`;--r)n+=1;return n%2==1}function RRe(e,t){let n=0,r=0;for(;r<t;){if(e[r]!=="`"){r+=1;continue}if(n===0&&F2(e,r)){r+=1;continue}let i=0;for(;r<t&&e[r]==="`";)i+=1,r+=1;n===0?n=i:i===n&&(n=0)}return n>0}function I2(e,t,n){let[,r,i]=t;return(t.index?e[t.index-1]:void 0)===`!`||F2(e,t.index??0)||RRe(e,t.index??0)?!1:!!r.trim()&&n(i)}function L2(e){let[t,n,r,,i,a,o]=e,s=i??a??o;return{index:e.index??0,text:t,replaceWith:n,data:{href:r,title:s||null,markdown:!0}}}function zRe(e,t){return e.index<t.index+t.text.length&&t.index<e.index+e.text.length}function R2(e){return{href:e.data?.href,title:e.data?.title??null}}function BRe(e){let t=h1({find:t=>{let n=IRe.exec(t);return!n||!I2(t,n,e.isAllowedHref)?null:L2(n)},type:e.type,getAttributes:R2});return new o1({find:t.find,handler:e=>{let n=t.handler(e);return n!==null&&e.state.tr.steps.length&&e.state.tr.setMeta(`preventAutolink`,!0),n}})}function VRe(e){let t=b1({find:t=>{let n=[];for(let r of t.matchAll(LRe))I2(t,r,e.isAllowedHref)&&n.push(L2(r));let r=(e.findPlainUrls?.call(e,t)??[]).filter(e=>!n.some(t=>zRe(t,e)));return[...n,...r]},type:e.type,getAttributes:R2});return new u1({find:t.find,handler:e=>{let n=t.handler(e);return n!==null&&e.state.tr.steps.length&&e.match.data?.markdown&&e.state.tr.setMeta(`preventAutolink`,!0),n}})}function HRe(e){return new mY({key:new _Y(`handlePasteLink`),props:{handlePaste:(t,n,r)=>{let{shouldAutoLink:i}=e,{state:a}=t,{selection:o}=a,{empty:s}=o;if(s)return!1;let c=``;r.content.forEach(e=>{c+=e.textContent});let l=N2(c,{defaultProtocol:e.defaultProtocol}).find(e=>e.isLink&&e.value===c);return!c||!l||i!==void 0&&!i(l.value)?!1:e.editor.commands.setMark(e.type,{href:l.href})}}})}function z2(e,t){let n=[`http`,`https`,`ftp`,`ftps`,`mailto`,`tel`,`callto`,`sms`,`cid`,`xmpp`];return t&&t.forEach(e=>{let t=typeof e==`string`?e:e.scheme;t&&n.push(t)}),!e||e.replace(MRe,``).match(RegExp(`^(?:(?:${n.map(e=>e.replace(/[-/\\^$*+?.()|[\]{}]/g,`\\$&`)).join(`|`)}):|[^a-z]|[a-z0-9+.\\-]+(?:[^a-z+.\\-:]|$))`,`i`))}var B2=l1.create({name:`link`,priority:1e3,keepOnSplit:!1,exitable:!0,onCreate(){this.options.validate&&!this.options.shouldAutoLink&&(this.options.shouldAutoLink=this.options.validate,console.warn("The `validate` option is deprecated. Rename to the `shouldAutoLink` option instead.")),this.options.protocols.forEach(e=>{if(typeof e==`string`){j2(e);return}j2(e.scheme,e.optionalSlashes)})},onDestroy(){ORe()},inclusive(){return this.options.autolink},addOptions(){return{openOnClick:!0,enableClickSelection:!1,linkOnPaste:!0,markdownLinks:!1,autolink:!0,protocols:[],defaultProtocol:`http`,HTMLAttributes:{target:`_blank`,rel:`noopener noreferrer nofollow`,class:null},isAllowedUri:(e,t)=>!!z2(e,t.protocols),validate:e=>!!e,shouldAutoLink:e=>{let t=/^[a-z][a-z0-9+.-]*:\/\//i.test(e),n=/^[a-z][a-z0-9+.-]*:/i.test(e);if(t||n&&!e.includes(`@`))return!0;let r=(e.includes(`@`)?e.split(`@`).pop():e).split(/[/?#:]/)[0];return!(/^\d{1,3}(\.\d{1,3}){3}$/.test(r)||!/\./.test(r))}}},addAttributes(){return{href:{default:null,parseHTML(e){return e.getAttribute(`href`)}},target:{default:this.options.HTMLAttributes.target??null},rel:{default:this.options.HTMLAttributes.rel??null},class:{default:this.options.HTMLAttributes.class??null},title:{default:null}}},parseHTML(){return[{tag:`a[href]`,getAttrs:e=>{let t=e.getAttribute(`href`);return!t||!this.options.isAllowedUri(t,{defaultValidate:e=>!!z2(e,this.options.protocols),protocols:this.options.protocols,defaultProtocol:this.options.defaultProtocol})?!1:null}}]},renderHTML({HTMLAttributes:e}){return this.options.isAllowedUri(e.href,{defaultValidate:e=>!!z2(e,this.options.protocols),protocols:this.options.protocols,defaultProtocol:this.options.defaultProtocol})?[`a`,v$(this.options.HTMLAttributes,e),0]:[`a`,v$(this.options.HTMLAttributes,{...e,href:``}),0]},markdownTokenName:`link`,parseMarkdown:(e,t)=>t.applyMark(`link`,t.parseInline(e.tokens||[]),{href:e.href,title:e.title||null}),renderMarkdown:(e,t)=>{let n=e.attrs?.href??``,r=e.attrs?.title??``,i=t.renderChildren(e);return r?`[${i}](${n} "${r}")`:`[${i}](${n})`},addCommands(){return{setLink:e=>({chain:t})=>{let{href:n}=e;return this.options.isAllowedUri(n,{defaultValidate:e=>!!z2(e,this.options.protocols),protocols:this.options.protocols,defaultProtocol:this.options.defaultProtocol})?t().setMark(this.name,e).setMeta(`preventAutolink`,!0).run():!1},toggleLink:e=>({chain:t})=>{let{href:n}=e||{};return n&&!this.options.isAllowedUri(n,{defaultValidate:e=>!!z2(e,this.options.protocols),protocols:this.options.protocols,defaultProtocol:this.options.defaultProtocol})?!1:t().toggleMark(this.name,e,{extendEmptyMarkRange:!0}).setMeta(`preventAutolink`,!0).run()},unsetLink:()=>({chain:e})=>e().unsetMark(this.name,{extendEmptyMarkRange:!0}).setMeta(`preventAutolink`,!0).run()}},addInputRules(){return this.options.markdownLinks?[BRe({type:this.type,isAllowedHref:e=>this.options.isAllowedUri(e,{defaultValidate:e=>!!z2(e,this.options.protocols),protocols:this.options.protocols,defaultProtocol:this.options.defaultProtocol})})]:[]},addPasteRules(){let e=e=>{let t=[];if(e){let{protocols:n,defaultProtocol:r}=this.options;N2(e).filter(e=>e.isLink&&this.options.isAllowedUri(e.value,{defaultValidate:e=>!!z2(e,n),protocols:n,defaultProtocol:r})).forEach(e=>{this.options.shouldAutoLink(e.value)&&t.push({text:e.value,data:{href:e.href},index:e.start})})}return t};return this.options.markdownLinks?[VRe({type:this.type,isAllowedHref:e=>this.options.isAllowedUri(e,{defaultValidate:e=>!!z2(e,this.options.protocols),protocols:this.options.protocols,defaultProtocol:this.options.defaultProtocol}),findPlainUrls:e})]:[b1({find:e,type:this.type,getAttributes:e=>({href:e.data?.href})})]},addProseMirrorPlugins(){let e=[],{protocols:t,defaultProtocol:n}=this.options;return this.options.autolink&&e.push(PRe({type:this.type,defaultProtocol:this.options.defaultProtocol,validate:e=>this.options.isAllowedUri(e,{defaultValidate:e=>!!z2(e,t),protocols:t,defaultProtocol:n}),shouldAutoLink:this.options.shouldAutoLink})),e.push(FRe({type:this.type,editor:this.editor,openOnClick:this.options.openOnClick===`whenNotEditable`?!0:this.options.openOnClick,enableClickSelection:this.options.enableClickSelection})),this.options.linkOnPaste&&e.push(HRe({editor:this.editor,defaultProtocol:this.options.defaultProtocol,type:this.type,shouldAutoLink:this.options.shouldAutoLink})),e}}),URe=B2,WRe=`listItem`,V2=`textStyle`,H2=/^\s*([-+*])\s$/,U2=y1.create({name:`bulletList`,addOptions(){return{itemTypeName:`listItem`,HTMLAttributes:{},keepMarks:!1,keepAttributes:!1}},group:`block list`,content(){return`${this.options.itemTypeName}+`},parseHTML(){return[{tag:`ul`}]},renderHTML({HTMLAttributes:e}){return[`ul`,v$(this.options.HTMLAttributes,e),0]},markdownTokenName:`list`,parseMarkdown:(e,t)=>e.type!==`list`||e.ordered?[]:{type:`bulletList`,content:e.items?t.parseChildren(e.items):[]},renderMarkdown:(e,t)=>e.content?t.renderChildren(e.content,`
+`):``,markdownOptions:{indentsContent:!0},addCommands(){return{toggleBulletList:()=>({commands:e,chain:t})=>this.options.keepAttributes?t().toggleList(this.name,this.options.itemTypeName,this.options.keepMarks).updateAttributes(WRe,this.editor.getAttributes(V2)).run():e.toggleList(this.name,this.options.itemTypeName,this.options.keepMarks)}},addKeyboardShortcuts(){return{"Mod-Shift-8":()=>this.editor.commands.toggleBulletList()}},addInputRules(){let e=v1({find:H2,type:this.type});return(this.options.keepMarks||this.options.keepAttributes)&&(e=v1({find:H2,type:this.type,keepMarks:this.options.keepMarks,keepAttributes:this.options.keepAttributes,getAttributes:()=>this.editor.getAttributes(V2),editor:this.editor})),[e]}}),GRe=(e,t,n)=>{let{selection:r}=e;if(!r.empty)return null;let{$from:i}=r;if(!i.parent.isTextblock||i.parentOffset!==i.parent.content.size)return null;let a=-1;for(let e=i.depth;e>0;--e)if(i.node(e).type.name===t){a=e;break}if(a<0)return null;let o=i.node(a),s=i.index(a);if(s+1>=o.childCount)return null;let c=o.child(s+1);if(!n.includes(c.type.name))return null;let l=e.schema.nodes[t],u=!1;if(c.forEach(e=>{e.type===l&&e.childCount>1&&(u=!0)}),!u)return null;let d=e.doc.resolve(i.after()).nodeAfter;if(!d||!n.includes(d.type.name))return null;let f=[];return d.forEach(e=>{f.push(e)}),f.length===0?null:{listItemDepth:a,nestedList:d,nestedListPos:i.after(),insertPos:i.after(a),items:f}},KRe=(e,t,n,r)=>{let i=GRe(e,n,r);if(!i)return!1;let{selection:a}=e,{nestedList:o,nestedListPos:s,insertPos:c,items:l}=i,u=e.tr;u.delete(s,s+o.nodeSize);let d=u.mapping.map(c);return u.insert(d,lq.from(l)),u.setSelection(a.map(u.doc,u.mapping)),t&&t(u),!0},qRe=(e,t,n)=>KRe(e.state,e.view.dispatch,t,n),W2=(e,t)=>p1.create({name:`${e}BranchingDeleteKeymap`,priority:101,addKeyboardShortcuts(){let n=()=>qRe(this.editor,e,t);return{Delete:n,"Mod-Delete":n}}}),G2=[[1e3,`m`],[900,`cm`],[500,`d`],[400,`cd`],[100,`c`],[90,`xc`],[50,`l`],[40,`xl`],[10,`x`],[9,`ix`],[5,`v`],[4,`iv`],[1,`i`]],K2=`abcdefghijklmnopqrstuvwxyz`,q2=String.raw`\d+|[ivxlcdmIVXLCDM]+|${`[a-zA-Z]{1,2}`}`;function J2(e){let t=e,n=``;for(let[e,r]of G2)for(;t>=e;)n+=r,t-=e;return n}function Y2(e){return J2(e).toUpperCase()}function X2(e){let t=e.toLowerCase(),n=0,r=0;for(;n<t.length;){let e=!1;for(let[i,a]of G2)if(t.startsWith(a,n)){r+=i,n+=a.length,e=!0;break}if(!e)return 0}return r}function JRe(e){if(!/^[ivxlcdmIVXLCDM]+$/.test(e))return!1;let t=X2(e);return t<=0?!1:(e===e.toLowerCase()?J2(t):Y2(t))===e}function YRe(e){let t=e.toLowerCase();if(t.length===1)return t.charCodeAt(0)-97+1;if(t.length===2){let e=t.charCodeAt(0)-97,n=t.charCodeAt(1)-97;return(e+1)*26+n+1}return 0}function Z2(e){if(e<=26)return K2[e-1];let t=Math.floor((e-1)/26)-1,n=(e-1)%26;return t<0?K2[n]:K2[t]+K2[n]}function Q2(e){if(!(!e||/^\d+$/.test(e))){if(JRe(e))return e===e.toLowerCase()?`i`:`I`;if(/^[a-z]{1,2}$/.test(e))return`a`;if(/^[A-Z]{1,2}$/.test(e))return`A`}}function $2(e){if(/^\d+$/.test(e))return parseInt(e,10);let t=Q2(e);if(t===`i`||t===`I`)return X2(e);if(t===`a`||t===`A`){let t=YRe(e);return t>0?t:1}let n=parseInt(e,10);return Number.isNaN(n)?1:n}function XRe(e,t){if(e===`numeric`)return String(t);switch(e){case`a`:return Z2(t);case`A`:return Z2(t).toUpperCase();case`i`:return J2(t);case`I`:return Y2(t);default:return String(t)}}function ZRe(e){if(e.length===0)return!1;let t=Q2(e[0])??`numeric`,n=$2(e[0]);if(n<1)return!1;for(let r=0;r<e.length;r++){let i=XRe(t,n+r);if(e[r]!==i)return!1}return!0}function QRe(e){return{type:Q2(e),start:$2(e)}}function $Re(e){let{type:t,start:n}=QRe(e),r={};return t&&(r.type=t),n!==1&&(r.start=n),r}function eze(e,t,n=`. `){let r=t+1;if(!e||e===`1`)return`${r}${n}`;switch(e){case`a`:return`${Z2(r)}${n}`;case`A`:return`${Z2(r).toUpperCase()}${n}`;case`i`:return`${J2(r)}${n}`;case`I`:return`${Y2(r)}${n}`;default:return`${r}${n}`}}function tze(e){let t=e.tokens?.[0];return!!(e.text&&e.tokens?.length===1&&t?.type===`list`&&t.ordered&&t.raw===e.text)}function nze(e,t){return t.tokenizeInline?t.parseInline(t.tokenizeInline(e)):t.parseInline([{type:`text`,raw:e,text:e}])}var e4=y1.create({name:`listItem`,addOptions(){return{HTMLAttributes:{},bulletListTypeName:`bulletList`,orderedListTypeName:`orderedList`}},content:`paragraph block*`,defining:!0,parseHTML(){return[{tag:`li`}]},renderHTML({HTMLAttributes:e}){return[`li`,v$(this.options.HTMLAttributes,e),0]},markdownTokenName:`list_item`,parseMarkdown:(e,t)=>{if(e.type!==`list_item`)return[];let n=t.parseBlockChildren??t.parseChildren,r=[];if(e.tokens&&e.tokens.length>0){if(tze(e))return{type:`listItem`,content:[{type:`paragraph`,content:nze(e.text||``,t)}]};if(e.tokens.some(e=>e.type===`paragraph`))r=n(e.tokens);else{let i=e.tokens[0];if(i&&i.type===`text`&&i.tokens&&i.tokens.length>0){if(r=[{type:`paragraph`,content:t.parseInline(i.tokens)}],e.tokens.length>1){let t=n(e.tokens.slice(1));r.push(...t)}}else r=n(e.tokens)}}return r.length===0&&(r=[{type:`paragraph`,content:[]}]),{type:`listItem`,content:r}},renderMarkdown:(e,t,n)=>i1(e,t,e=>{if(e.parentType===`bulletList`)return`- `;if(e.parentType===`orderedList`){var t,n;let r=((t=e.meta)==null||(t=t.parentAttrs)==null?void 0:t.start)||1;return eze((n=e.meta)==null||(n=n.parentAttrs)==null?void 0:n.type,r-1+(e.index||0),`. `)}return`- `},n,{alignNestedToPrefix:n?.parentType===`orderedList`}),addExtensions(){return[W2(this.name,[this.options.bulletListTypeName,this.options.orderedListTypeName])]},addKeyboardShortcuts(){return{Enter:()=>this.editor.commands.splitListItem(this.name),Tab:()=>this.editor.commands.sinkListItem(this.name),"Shift-Tab":()=>this.editor.commands.liftListItem(this.name)}}}),t4=(e,t)=>{let{$from:n}=t.selection,r=IQ(e,t.schema),i=null,a=n.depth,o=n.pos,s=null;for(;a>0&&s===null;)i=n.node(a),i.type===r?s=a:(--a,--o);return s===null?null:{$pos:t.doc.resolve(o),depth:s}},n4=(e,t)=>{let n=t4(e,t);if(!n)return!1;let[,r]=SFe(t,e,n.$pos.pos+4);return r},rze=(e,t,n)=>{let{$anchor:r}=e.selection,i=Math.max(0,r.pos-2),a=e.doc.resolve(i).node();return!(!a||!n.includes(a.type.name))},r4=(e,t,n)=>{if(e.commands.undoInputRule())return!0;if(e.state.selection.from!==e.state.selection.to)return!1;if(!r$(e.state,t)&&rze(e.state,t,n)){let{$anchor:n}=e.state.selection,r=e.state.doc.resolve(n.before()-1),i=[];r.node().descendants((e,n)=>{e.type.name===t&&i.push({node:e,pos:n})});let a=i.at(-1);if(!a)return!1;let o=e.state.doc.resolve(r.start()+a.pos+1);return e.chain().cut({from:n.start()-1,to:n.end()+1},o.end()).joinForward().run()}if(!r$(e.state,t)||!DFe(e.state))return!1;let{$from:r}=e.state.selection,i=r.depth-1;return r.node(i).type!==e.schema.nodes[t]||r.index(i)!==0?!1:e.chain().liftListItem(t).run()},ize=(e,t)=>{let n=n4(e,t),r=t4(e,t);return!r||!n?!1:n>r.depth},aze=(e,t)=>{let n=n4(e,t),r=t4(e,t);return!r||!n?!1:n<r.depth},i4=(e,t)=>{if(!r$(e.state,t)||!EFe(e.state,t))return!1;let{selection:n}=e.state,{$from:r,$to:i}=n;return!n.empty&&r.sameParent(i)?!1:ize(t,e.state)?e.chain().focus(e.state.selection.from+4).lift(t).joinBackward().run():aze(t,e.state)?e.chain().joinForward().joinBackward().run():e.commands.joinItemForward()},oze=(e,t,n)=>{let{state:r}=e,{selection:i}=r;if(!i.empty)return!1;let{$from:a}=i;if(a.parentOffset!==0||!a.parent.isTextblock||r$(r,t))return!1;let o=CFe(a);if(!o||!n.includes(o.type.name))return!1;let s=o.lastChild;if(!s||s.type.name!==t)return!1;let c=a.parent;if(!s.canReplace(s.childCount,s.childCount,lq.from(c)))return!1;let l=a.before(),u=a.after(),d=l-2;return e.commands.command(({tr:e,dispatch:t})=>(t&&(e.delete(l,u).insert(d,lq.from(c)),e.setSelection(eY.create(e.doc,d+1)),e.scrollIntoView()),!0))},a4=p1.create({name:`listKeymap`,addOptions(){return{listTypes:[{itemName:`listItem`,wrapperNames:[`bulletList`,`orderedList`]},{itemName:`taskItem`,wrapperNames:[`taskList`]}]}},addKeyboardShortcuts(){return{Delete:({editor:e})=>{let t=!1;return this.options.listTypes.forEach(({itemName:n})=>{e.state.schema.nodes[n]!==void 0&&i4(e,n)&&(t=!0)}),t},"Mod-Delete":({editor:e})=>{let t=!1;return this.options.listTypes.forEach(({itemName:n})=>{e.state.schema.nodes[n]!==void 0&&i4(e,n)&&(t=!0)}),t},Backspace:({editor:e})=>{let t=!1;return this.options.listTypes.forEach(({itemName:n,wrapperNames:r})=>{e.state.schema.nodes[n]!==void 0&&r4(e,n,r)&&(t=!0)}),t},"Mod-Backspace":({editor:e})=>{let t=!1;return this.options.listTypes.forEach(({itemName:n,wrapperNames:r})=>{e.state.schema.nodes[n]!==void 0&&r4(e,n,r)&&(t=!0)}),t},Tab:({editor:e})=>{for(let{itemName:t,wrapperNames:n}of this.options.listTypes)if(e.state.schema.nodes[t]!==void 0&&oze(e,t,n))return!0;return!1}}}}),o4=RegExp(`^(\\s*)(${q2})([.)])\\s+(.*)$`),sze=/^\s/,s4={heading:/^#{1,6}(?:\s|$)/,bulletItem:/^[-+*]\s+/,codeFence:/^(?:```|~~~)/,blockMath:/^\$\$/,thematicBreak:/^(?:(?:-[ \t]*){3,}|(?:_[ \t]*){3,}|(?:\*[ \t]*){3,})$/};function cze(e){return o4.test(e.trimStart())}function lze(e){let t=e.trimStart();return s4.bulletItem.test(t)||cze(t)||s4.heading.test(t)||s4.thematicBreak.test(t)&&!t.startsWith(`-`)||/^>\s?/.test(t)||s4.codeFence.test(t)||s4.blockMath.test(t)}function uze(e){return Object.values(s4).some(t=>t.test(e))}function dze(e){let t=[],n=[],r=!1;return e.forEach(e=>{if(r){n.push(e);return}if(e.trim()===``){r=!0,n.push(e);return}if(t.length>0&&lze(e)){r=!0,n.push(e);return}t.push(e)}),{paragraphLines:t,blockLines:n}}function fze(e){let t=[],n=0,r=0;for(;n<e.length;){let i=e[n],a=i.match(o4);if(!a)break;let[,o,s,c,l]=a,u=o.length,d=parseInt(s,10),f=isNaN(d)?Q2(s):void 0,p=isNaN(d)?$2(s):d,m=[l],h=n+1,g=[i],_=!1;for(;h<e.length;){let t=e[h];if(t.match(o4))break;if(t.trim()===``)g.push(t),m.push(``),_=!0,h+=1;else if(t.match(sze)){let e=t.length-t.trimStart().length,n=u+s.length+1;g.push(t),m.push(t.slice(Math.min(e,n))),h+=1}else{if(_||uze(t))break;g.push(t),m.push(t),h+=1}}t.push({indent:u,number:p,type:f,content:m.join(`
 `).trim(),contentLines:m,raw:g.join(`
-`)}),r=h,n=h}return[t,r]}var fze=RegExp(`^(${W2})([.)])\\s+(.+)$`);function pze(e){let t=e.split(`
-`).filter(e=>e.trim().length>0);if(t.length===0)return null;let n=[];for(let e of t){let t=e.trim().match(fze);if(!t)return null;n.push({marker:t[1],content:t[3]})}return XRe(n.map(e=>e.marker))?{type:`orderedList`,attrs:QRe(n[0].marker),content:n.map(e=>({type:`listItem`,content:[{type:`paragraph`,content:[{type:`text`,text:e.content}]}]}))}:null}function a4(e,t,n){let r=[],i=0;for(;i<e.length;){let a=e[i];if(a.indent===t){let{paragraphLines:o,blockLines:s}=uze(a.contentLines),c=o.join(`
+`)}),r=h,n=h}return[t,r]}var pze=RegExp(`^(${q2})([.)])\\s+(.+)$`);function mze(e){let t=e.split(`
+`).filter(e=>e.trim().length>0);if(t.length===0)return null;let n=[];for(let e of t){let t=e.trim().match(pze);if(!t)return null;n.push({marker:t[1],content:t[3]})}return ZRe(n.map(e=>e.marker))?{type:`orderedList`,attrs:$Re(n[0].marker),content:n.map(e=>({type:`listItem`,content:[{type:`paragraph`,content:[{type:`text`,text:e.content}]}]}))}:null}function c4(e,t,n){let r=[],i=0;for(;i<e.length;){let a=e[i];if(a.indent===t){let{paragraphLines:o,blockLines:s}=dze(a.contentLines),c=o.join(`
 `).trim(),l=[];c&&l.push({type:`paragraph`,raw:c,tokens:n.inlineTokens(c)});let u=s.join(`
-`).trim();if(u){let e=n.blockTokens(u);l.push(...e)}let d=i+1,f=[];for(;d<e.length&&e[d].indent>t;)f.push(e[d]),d+=1;if(f.length>0){let e=a4(f,Math.min(...f.map(e=>e.indent)),n);l.push({type:`list`,ordered:!0,start:f[0].number,typeMarker:f[0].type,items:e,raw:f.map(e=>e.raw).join(`
-`)})}r.push({type:`list_item`,raw:a.raw,tokens:l}),i=d}else i+=1}return r}function mze(e,t){return e.map(e=>{if(e.type!==`list_item`)return t.parseChildren([e])[0];let n=[];return e.tokens&&e.tokens.length>0&&e.tokens.forEach(e=>{if(e.type===`paragraph`||e.type===`list`||e.type===`blockquote`||e.type===`code`)n.push(...t.parseChildren([e]));else if(e.type===`text`&&e.tokens){let r=t.parseChildren([e]);n.push({type:`paragraph`,content:r})}else{let r=t.parseChildren([e]);r.length>0&&n.push(...r)}}),{type:`listItem`,content:n}})}var hze=`listItem`,o4=`textStyle`,s4=/^(\d+)\.\s$/;function c4(e){let t=e.match(/list-style-type\s*:\s*([^;]+)/i);if(!t)return null;switch(t[1].trim().toLowerCase()){case`upper-roman`:return`I`;case`lower-roman`:return`i`;case`upper-alpha`:case`upper-latin`:return`A`;case`lower-alpha`:case`lower-latin`:return`a`;default:return null}}var l4=g1.create({name:`orderedList`,addOptions(){return{itemTypeName:`listItem`,HTMLAttributes:{},keepMarks:!1,keepAttributes:!1}},group:`block list`,content(){return`${this.options.itemTypeName}+`},addAttributes(){return{start:{default:1,parseHTML:e=>e.hasAttribute(`start`)?parseInt(e.getAttribute(`start`)||``,10):1},type:{default:null,parseHTML:e=>{let t=e.getAttribute(`type`);if(t)return t;let n=e.getAttribute(`style`);if(n){let e=c4(n);if(e)return e}let r=e.querySelector(`li`);if(r){let e=r.getAttribute(`style`);if(e){let t=c4(e);if(t)return t}}return null}}}},parseHTML(){return[{tag:`ol`}]},renderHTML({HTMLAttributes:e}){let{start:t,type:n,...r}=e,i=h$(this.options.HTMLAttributes,r);return t!==1&&(i.start=t),n&&n!==`1`&&(i.type=n),[`ol`,i,0]},markdownTokenName:`list`,parseMarkdown:(e,t)=>{if(e.type!==`list`||!e.ordered)return[];let n=e.start||1,r=e.typeMarker,i=e.items?mze(e.items,t):[],a={};return n!==1&&(a.start=n),r&&(a.type=r),Object.keys(a).length>0?{type:`orderedList`,attrs:a,content:i}:{type:`orderedList`,content:i}},renderMarkdown:(e,t)=>e.content?t.renderChildren(e.content,`
+`).trim();if(u){let e=n.blockTokens(u);l.push(...e)}let d=i+1,f=[];for(;d<e.length&&e[d].indent>t;)f.push(e[d]),d+=1;if(f.length>0){let e=c4(f,Math.min(...f.map(e=>e.indent)),n);l.push({type:`list`,ordered:!0,start:f[0].number,typeMarker:f[0].type,items:e,raw:f.map(e=>e.raw).join(`
+`)})}r.push({type:`list_item`,raw:a.raw,tokens:l}),i=d}else i+=1}return r}function hze(e,t){return e.map(e=>{if(e.type!==`list_item`)return t.parseChildren([e])[0];let n=[];return e.tokens&&e.tokens.length>0&&e.tokens.forEach(e=>{if(e.type===`paragraph`||e.type===`list`||e.type===`blockquote`||e.type===`code`)n.push(...t.parseChildren([e]));else if(e.type===`text`&&e.tokens){let r=t.parseChildren([e]);n.push({type:`paragraph`,content:r})}else{let r=t.parseChildren([e]);r.length>0&&n.push(...r)}}),{type:`listItem`,content:n}})}var gze=`listItem`,l4=`textStyle`,u4=/^(\d+)\.\s$/;function d4(e){let t=e.match(/list-style-type\s*:\s*([^;]+)/i);if(!t)return null;switch(t[1].trim().toLowerCase()){case`upper-roman`:return`I`;case`lower-roman`:return`i`;case`upper-alpha`:case`upper-latin`:return`A`;case`lower-alpha`:case`lower-latin`:return`a`;default:return null}}var f4=y1.create({name:`orderedList`,addOptions(){return{itemTypeName:`listItem`,HTMLAttributes:{},keepMarks:!1,keepAttributes:!1}},group:`block list`,content(){return`${this.options.itemTypeName}+`},addAttributes(){return{start:{default:1,parseHTML:e=>e.hasAttribute(`start`)?parseInt(e.getAttribute(`start`)||``,10):1},type:{default:null,parseHTML:e=>{let t=e.getAttribute(`type`);if(t)return t;let n=e.getAttribute(`style`);if(n){let e=d4(n);if(e)return e}let r=e.querySelector(`li`);if(r){let e=r.getAttribute(`style`);if(e){let t=d4(e);if(t)return t}}return null}}}},parseHTML(){return[{tag:`ol`}]},renderHTML({HTMLAttributes:e}){let{start:t,type:n,...r}=e,i=v$(this.options.HTMLAttributes,r);return t!==1&&(i.start=t),n&&n!==`1`&&(i.type=n),[`ol`,i,0]},markdownTokenName:`list`,parseMarkdown:(e,t)=>{if(e.type!==`list`||!e.ordered)return[];let n=e.start||1,r=e.typeMarker,i=e.items?hze(e.items,t):[],a={};return n!==1&&(a.start=n),r&&(a.type=r),Object.keys(a).length>0?{type:`orderedList`,attrs:a,content:i}:{type:`orderedList`,content:i}},renderMarkdown:(e,t)=>e.content?t.renderChildren(e.content,`
 `):``,markdownTokenizer:{name:`orderedList`,level:`block`,start:()=>-1,tokenize:(e,t,n)=>{let r=e.split(`
-`),[i,a]=dze(r);if(i.length===0)return;let o=a4(i,i[0].indent,n);if(o.length!==0)return{type:`list`,ordered:!0,start:i[0]?.number||1,typeMarker:i[0]?.type,items:o,raw:r.slice(0,a).join(`
-`)}}},markdownOptions:{indentsContent:!0},addCommands(){return{toggleOrderedList:()=>({commands:e,chain:t})=>this.options.keepAttributes?t().toggleList(this.name,this.options.itemTypeName,this.options.keepMarks).updateAttributes(hze,this.editor.getAttributes(o4)).run():e.toggleList(this.name,this.options.itemTypeName,this.options.keepMarks)}},addKeyboardShortcuts(){return{"Mod-Shift-7":()=>this.editor.commands.toggleOrderedList()}},addProseMirrorPlugins(){return[new dY({props:{handlePaste:(e,t)=>{if((t.clipboardData?.getData(`text/html`))?.trim())return!1;let n=t.clipboardData?.getData(`text/plain`);if(!n)return!1;let r=pze(n);if(!r)return!1;try{let t=e.state.schema.nodeFromJSON(r),n=e.state.tr.replaceSelectionWith(t);return e.dispatch(n),!0}catch{return!1}}}})]},addInputRules(){let e=(e,t)=>(!t.attrs.type||t.attrs.type===`1`)&&t.childCount+t.attrs.start===+e[1],t=h1({find:s4,type:this.type,getAttributes:e=>({start:+e[1]}),joinPredicate:e});return(this.options.keepMarks||this.options.keepAttributes)&&(t=h1({find:s4,type:this.type,keepMarks:this.options.keepMarks,keepAttributes:this.options.keepAttributes,getAttributes:e=>({start:+e[1],...this.editor.getAttributes(o4)}),joinPredicate:e,editor:this.editor})),[t]}}),gze=/^\s*(\[([( |x])?\])\s$/,_ze=`position:absolute;width:1px;height:1px;padding:0;margin:-1px;overflow:hidden;clip:rect(0,0,0,0);white-space:nowrap;border:0`,vze=(e,t,n)=>{var r;return(n==null||(r=n.checkboxLabel)==null?void 0:r.call(n,e,t))||`Task item checkbox for ${e.textContent||`empty task item`}`},yze=g1.create({name:`taskItem`,addOptions(){return{nested:!1,HTMLAttributes:{},taskListTypeName:`taskList`,a11y:void 0}},content(){return this.options.nested?`paragraph block*`:`paragraph+`},defining:!0,addAttributes(){return{checked:{default:!1,keepOnSplit:!1,parseHTML:e=>{let t=e.getAttribute(`data-checked`);return t===``||t===`true`},renderHTML:e=>({"data-checked":e.checked})}}},parseHTML(){return[{tag:`li[data-type="${this.name}"]`,priority:51,contentElement:e=>e.querySelector(`div`)??e}]},renderHTML({node:e,HTMLAttributes:t}){return[`li`,h$(this.options.HTMLAttributes,t,{"data-type":this.name}),[`label`,[`input`,{type:`checkbox`,checked:e.attrs.checked?`checked`:null}],[`span`]],[`div`,0]]},parseMarkdown:(e,t)=>{let n=[];if(e.tokens&&e.tokens.length>0?n.push(t.createNode(`paragraph`,{},t.parseInline(e.tokens))):e.text?n.push(t.createNode(`paragraph`,{},[t.createNode(`text`,{text:e.text})])):n.push(t.createNode(`paragraph`,{},[])),e.nestedTokens&&e.nestedTokens.length>0){let r=t.parseChildren(e.nestedTokens);n.push(...r)}return t.createNode(`taskItem`,{checked:e.checked||!1},n)},renderMarkdown:(e,t)=>t1(e,t,`- [${e.attrs?.checked?`x`:` `}] `),addExtensions(){return this.options.nested?[V2(this.name,[this.options.taskListTypeName])]:[]},addKeyboardShortcuts(){let e={Enter:()=>this.editor.commands.splitListItem(this.name),"Shift-Tab":()=>this.editor.commands.liftListItem(this.name)};return this.options.nested?{...e,Tab:()=>this.editor.commands.sinkListItem(this.name)}:e},addNodeView(){return({node:e,HTMLAttributes:t,getPos:n,editor:r})=>{let i=document.createElement(`li`),a=document.createElement(`label`),o=document.createElement(`span`),s=document.createElement(`input`),c=document.createElement(`div`);o.style.cssText=_ze;let l=e=>{let t=vze(e,e.attrs.checked,this.options.a11y);s.setAttribute(`aria-label`,t),o.textContent=t};l(e),a.contentEditable=`false`,s.type=`checkbox`,s.addEventListener(`mousedown`,e=>e.preventDefault()),s.addEventListener(`change`,t=>{if(!r.isEditable&&!this.options.onReadOnlyChecked){s.checked=!s.checked;return}let{checked:i}=t.target;r.isEditable&&typeof n==`function`&&r.chain().focus(void 0,{scrollIntoView:!1}).command(({tr:e})=>{let t=n();if(typeof t!=`number`)return!1;let r=e.doc.nodeAt(t);return e.setNodeMarkup(t,void 0,{...r?.attrs,checked:i}),!0}).run(),!r.isEditable&&this.options.onReadOnlyChecked&&(this.options.onReadOnlyChecked(e,i)||(s.checked=!s.checked))}),Object.entries(this.options.HTMLAttributes).forEach(([e,t])=>{i.setAttribute(e,t)}),i.dataset.checked=e.attrs.checked,s.checked=e.attrs.checked,a.append(s,o),i.append(a,c),Object.entries(t).forEach(([e,t])=>{i.setAttribute(e,t)});let u=new Set(Object.keys(t));return{dom:i,contentDOM:c,update:e=>{if(e.type!==this.type)return!1;i.dataset.checked=e.attrs.checked,s.checked=e.attrs.checked,l(e);let t=r.extensionManager.attributes,n=g$(e,t),a=new Set(Object.keys(n)),o=this.options.HTMLAttributes;return u.forEach(e=>{a.has(e)||(e in o?i.setAttribute(e,o[e]):i.removeAttribute(e))}),Object.entries(n).forEach(([e,t])=>{t==null?e in o?i.setAttribute(e,o[e]):i.removeAttribute(e):i.setAttribute(e,t)}),u=a,!0}}}},addInputRules(){return[h1({find:gze,type:this.type,getAttributes:e=>({checked:e[e.length-1]===`x`})})]}}),bze=g1.create({name:`taskList`,addOptions(){return{itemTypeName:`taskItem`,HTMLAttributes:{}}},group:`block list`,content(){return`${this.options.itemTypeName}+`},parseHTML(){return[{tag:`ul[data-type="${this.name}"]`,priority:51}]},renderHTML({HTMLAttributes:e}){return[`ul`,h$(this.options.HTMLAttributes,e,{"data-type":this.name}),0]},parseMarkdown:(e,t)=>t.createNode(`taskList`,{},t.parseChildren(e.items||[])),renderMarkdown:(e,t)=>e.content?t.renderChildren(e.content,`
-`):``,markdownTokenizer:{name:`taskList`,level:`block`,start(e){let t=e.match(/^\s*[-+*]\s+\[([ xX])\]\s+/)?.index;return t===void 0?-1:t},tokenize(e,t,n){let r=e=>{let t=Q$(e,{itemPattern:/^(\s*)([-+*])\s+\[([ xX])\]\s+(.*)$/,extractItemData:e=>({indentLevel:e[1].length,mainContent:e[4],checked:e[3].toLowerCase()===`x`}),createToken:(e,t)=>({type:`taskItem`,raw:``,mainContent:e.mainContent,indentLevel:e.indentLevel,checked:e.checked,text:e.mainContent,tokens:n.inlineTokens(e.mainContent),nestedTokens:t}),customNestedParser:r},n);if(t){let r={type:`taskList`,raw:t.raw,items:t.items},i=e.slice(t.raw.length);return i.trim()?[r,...n.blockTokens(i)]:[r]}return n.blockTokens(e)},i=Q$(e,{itemPattern:/^(\s*)([-+*])\s+\[([ xX])\]\s+(.*)$/,extractItemData:e=>({indentLevel:e[1].length,mainContent:e[4],checked:e[3].toLowerCase()===`x`}),createToken:(e,t)=>({type:`taskItem`,raw:``,mainContent:e.mainContent,indentLevel:e.indentLevel,checked:e.checked,text:e.mainContent,tokens:n.inlineTokens(e.mainContent),nestedTokens:t}),customNestedParser:r},n);if(i)return{type:`taskList`,raw:i.raw,items:i.items}}},markdownOptions:{indentsContent:!0},addCommands(){return{toggleTaskList:()=>({commands:e})=>e.toggleList(this.name,this.options.itemTypeName)}},addKeyboardShortcuts(){return{"Mod-Shift-9":()=>this.editor.commands.toggleTaskList()}}});u1.create({name:`listKit`,addExtensions(){let e=[];return this.options.bulletList!==!1&&e.push(B2.configure(this.options.bulletList)),this.options.listItem!==!1&&e.push(Z2.configure(this.options.listItem)),this.options.listKeymap!==!1&&e.push(n4.configure(this.options.listKeymap)),this.options.orderedList!==!1&&e.push(l4.configure(this.options.orderedList)),this.options.taskItem!==!1&&e.push(yze.configure(this.options.taskItem)),this.options.taskList!==!1&&e.push(bze.configure(this.options.taskList)),e}});var u4=`&nbsp;`,d4=`\xA0`,xze=g1.create({name:`paragraph`,priority:1e3,addOptions(){return{HTMLAttributes:{}}},group:`block`,content:`inline*`,parseHTML(){return[{tag:`p`}]},renderHTML({HTMLAttributes:e}){return[`p`,h$(this.options.HTMLAttributes,e),0]},parseMarkdown:(e,t)=>{let n=e.tokens||[];if(n.length===1&&n[0].type===`image`)return t.parseChildren([n[0]]);let r=t.parseInline(n);return n.length===1&&n[0].type===`text`&&(n[0].raw===u4||n[0].text===u4||n[0].raw===d4||n[0].text===d4)&&r.length===1&&r[0].type===`text`&&(r[0].text===u4||r[0].text===d4)?t.createNode(`paragraph`,void 0,[]):t.createNode(`paragraph`,void 0,r)},renderMarkdown:(e,t,n)=>{if(!e)return``;let r=Array.isArray(e.content)?e.content:[];if(r.length===0){var i,a;let e=Array.isArray(n==null||(i=n.previousNode)==null?void 0:i.content)?n.previousNode.content:[];return(n==null||(a=n.previousNode)==null?void 0:a.type)===`paragraph`&&e.length===0?u4:``}return t.renderChildren(r)},addCommands(){return{setParagraph:()=>({commands:e})=>e.setNode(this.name)}},addKeyboardShortcuts(){return{"Mod-Alt-0":()=>this.editor.commands.setParagraph()}}}),Sze=/(?:^|\s)(~~(?!\s+~~)((?:[^~]+))~~(?!\s+~~))$/,Cze=/(?:^|\s)(~~(?!\s+~~)((?:[^~]+))~~(?!\s+~~))/g,wze=o1.create({name:`strike`,addOptions(){return{HTMLAttributes:{}}},parseHTML(){return[{tag:`s`},{tag:`del`},{tag:`strike`},{style:`text-decoration`,consuming:!1,getAttrs:e=>e.includes(`line-through`)?{}:!1}]},renderHTML({HTMLAttributes:e}){return[`s`,h$(this.options.HTMLAttributes,e),0]},markdownTokenName:`del`,parseMarkdown:(e,t)=>t.applyMark(`strike`,t.parseInline(e.tokens||[])),renderMarkdown:(e,t)=>`~~${t.renderChildren(e)}~~`,addCommands(){return{setStrike:()=>({commands:e})=>e.setMark(this.name),toggleStrike:()=>({commands:e})=>e.toggleMark(this.name),unsetStrike:()=>({commands:e})=>e.unsetMark(this.name)}},addKeyboardShortcuts(){return{"Mod-Shift-s":()=>this.editor.commands.toggleStrike()}},addInputRules(){return[f1({find:Sze,type:this.type})]},addPasteRules(){return[_1({find:Cze,type:this.type})]}}),Tze=g1.create({name:`text`,group:`inline`,parseMarkdown:e=>({type:`text`,text:e.text||``}),renderMarkdown:e=>e.text||``}),f4=o1.create({name:`underline`,addOptions(){return{HTMLAttributes:{}}},parseHTML(){return[{tag:`u`},{style:`text-decoration`,consuming:!1,getAttrs:e=>e.includes(`underline`)?{}:!1}]},renderHTML({HTMLAttributes:e}){return[`u`,h$(this.options.HTMLAttributes,e),0]},parseMarkdown(e,t){return t.applyMark(this.name||`underline`,t.parseInline(e.tokens||[]))},renderMarkdown(e,t){return`++${t.renderChildren(e)}++`},markdownTokenizer:{name:`underline`,level:`inline`,start(e){return e.indexOf(`++`)},tokenize(e,t,n){let r=/^(\+\+)([\s\S]+?)(\+\+)/.exec(e);if(!r)return;let i=r[2].trim();return{type:`underline`,raw:r[0],text:i,tokens:n.inlineTokens(i)}}},addCommands(){return{setUnderline:()=>({commands:e})=>e.setMark(this.name),toggleUnderline:()=>({commands:e})=>e.toggleMark(this.name),unsetUnderline:()=>({commands:e})=>e.unsetMark(this.name)}},addKeyboardShortcuts(){return{"Mod-u":()=>this.editor.commands.toggleUnderline(),"Mod-U":()=>this.editor.commands.toggleUnderline()}}}),Eze=f4;function Dze(e={}){return new dY({view(t){return new Oze(t,e)}})}var Oze=class{constructor(e,t){this.editorView=e,this.cursorPos=null,this.element=null,this.timeout=-1,this.width=t.width??1,this.color=t.color===!1?void 0:t.color||`black`,this.class=t.class,this.handlers=[`dragover`,`dragend`,`drop`,`dragleave`].map(t=>{let n=e=>{this[t](e)};return e.dom.addEventListener(t,n),{name:t,handler:n}})}destroy(){this.handlers.forEach(({name:e,handler:t})=>this.editorView.dom.removeEventListener(e,t))}update(e,t){this.cursorPos!=null&&t.doc!=e.state.doc&&(this.cursorPos>e.state.doc.content.size?this.setCursor(null):this.updateOverlay())}setCursor(e){e!=this.cursorPos&&(this.cursorPos=e,e==null?(this.element.parentNode.removeChild(this.element),this.element=null):this.updateOverlay())}updateOverlay(){let e=this.editorView.state.doc.resolve(this.cursorPos),t=!e.parent.inlineContent,n,r=this.editorView.dom,i=r.getBoundingClientRect(),a=i.width/r.offsetWidth,o=i.height/r.offsetHeight;if(t){let t=e.nodeBefore,r=e.nodeAfter;if(t||r){let e=this.editorView.nodeDOM(this.cursorPos-(t?t.nodeSize:0));if(e){let i=e.getBoundingClientRect(),a=t?i.bottom:i.top;t&&r&&(a=(a+this.editorView.nodeDOM(this.cursorPos).getBoundingClientRect().top)/2);let s=this.width/2*o;n={left:i.left,right:i.right,top:a-s,bottom:a+s}}}}if(!n){let e=this.editorView.coordsAtPos(this.cursorPos),t=this.width/2*a;n={left:e.left-t,right:e.left+t,top:e.top,bottom:e.bottom}}let s=this.editorView.dom.offsetParent;this.element||(this.element=s.appendChild(document.createElement(`div`)),this.class&&(this.element.className=this.class),this.element.style.cssText=`position: absolute; z-index: 50; pointer-events: none;`,this.color&&(this.element.style.backgroundColor=this.color)),this.element.classList.toggle(`prosemirror-dropcursor-block`,t),this.element.classList.toggle(`prosemirror-dropcursor-inline`,!t);let c,l;if(!s||s==document.body&&getComputedStyle(s).position==`static`)c=-pageXOffset,l=-pageYOffset;else{let e=s.getBoundingClientRect(),t=e.width/s.offsetWidth,n=e.height/s.offsetHeight;c=e.left-s.scrollLeft*t,l=e.top-s.scrollTop*n}this.element.style.left=(n.left-c)/a+`px`,this.element.style.top=(n.top-l)/o+`px`,this.element.style.width=(n.right-n.left)/a+`px`,this.element.style.height=(n.bottom-n.top)/o+`px`}scheduleRemoval(e){clearTimeout(this.timeout),this.timeout=setTimeout(()=>this.setCursor(null),e)}dragover(e){if(!this.editorView.editable)return;let t=this.editorView.posAtCoords({left:e.clientX,top:e.clientY}),n=t&&t.inside>=0&&this.editorView.state.doc.nodeAt(t.inside),r=n&&n.type.spec.disableDropCursor,i=typeof r==`function`?r(this.editorView,t,e):r;if(t&&!i){let e=t.pos;if(this.editorView.dragging&&this.editorView.dragging.slice){let t=MJ(this.editorView.state.doc,e,this.editorView.dragging.slice);t!=null&&(e=t)}this.setCursor(e),this.scheduleRemoval(5e3)}}dragend(){this.scheduleRemoval(20)}drop(){this.scheduleRemoval(20)}dragleave(e){this.editorView.dom.contains(e.relatedTarget)||this.setCursor(null)}},p4=class e extends JJ{constructor(e){super(e,e)}map(t,n){let r=t.resolve(n.map(this.head));return e.valid(r)?new e(r):JJ.near(r)}content(){return fq.empty}eq(t){return t instanceof e&&t.head==this.head}toJSON(){return{type:`gapcursor`,pos:this.head}}static fromJSON(t,n){if(typeof n.pos!=`number`)throw RangeError(`Invalid input for GapCursor.fromJSON`);return new e(t.resolve(n.pos))}getBookmark(){return new kze(this.anchor)}static valid(e){let t=e.parent;if(t.inlineContent||!Aze(e)||!jze(e))return!1;let n=t.type.spec.allowGapCursor;if(n!=null)return n;let r=t.contentMatchAt(e.index()).defaultType;return r&&r.isTextblock}static findGapCursorFrom(t,n,r=!1){search:for(;;){if(!r&&e.valid(t))return t;let i=t.pos,a=null;for(let r=t.depth;;r--){let o=t.node(r);if(n>0?t.indexAfter(r)<o.childCount:t.index(r)>0){a=o.child(n>0?t.indexAfter(r):t.index(r)-1);break}else if(r==0)return null;i+=n;let s=t.doc.resolve(i);if(e.valid(s))return s}for(;;){let o=n>0?a.firstChild:a.lastChild;if(!o){if(a.isAtom&&!a.isText&&!$J.isSelectable(a)){t=t.doc.resolve(i+a.nodeSize*n),r=!1;continue search}break}a=o,i+=n;let s=t.doc.resolve(i);if(e.valid(s))return s}return null}}};p4.prototype.visible=!1,p4.findFrom=p4.findGapCursorFrom,JJ.jsonID(`gapcursor`,p4);var kze=class e{constructor(e){this.pos=e}map(t){return new e(t.map(this.pos))}resolve(e){let t=e.resolve(this.pos);return p4.valid(t)?new p4(t):JJ.near(t)}};function m4(e){return e.isAtom||e.spec.isolating||e.spec.createGapCursor}function Aze(e){for(let t=e.depth;t>=0;t--){let n=e.index(t),r=e.node(t);if(n==0){if(r.type.spec.isolating)return!0;continue}for(let e=r.child(n-1);;e=e.lastChild){if(e.childCount==0&&!e.inlineContent||m4(e.type))return!0;if(e.inlineContent)return!1}}return!0}function jze(e){for(let t=e.depth;t>=0;t--){let n=e.indexAfter(t),r=e.node(t);if(n==r.childCount){if(r.type.spec.isolating)return!0;continue}for(let e=r.child(n);;e=e.firstChild){if(e.childCount==0&&!e.inlineContent||m4(e.type))return!0;if(e.inlineContent)return!1}}return!0}function Mze(){return new dY({props:{decorations:Ize,createSelectionBetween(e,t,n){return t.pos==n.pos&&p4.valid(n)?new p4(n):null},handleClick:Pze,handleKeyDown:Nze,handleDOMEvents:{beforeinput:Fze}}})}var Nze=AQ({ArrowLeft:h4(`horiz`,-1),ArrowRight:h4(`horiz`,1),ArrowUp:h4(`vert`,-1),ArrowDown:h4(`vert`,1)});function h4(e,t){let n=e==`vert`?t>0?`down`:`up`:t>0?`right`:`left`;return function(e,r,i){let a=e.selection,o=t>0?a.$to:a.$from,s=a.empty;if(a instanceof ZJ){if(!i.endOfTextblock(n)||o.depth==0)return!1;s=!1,o=e.doc.resolve(t>0?o.after():o.before())}let c=p4.findGapCursorFrom(o,t,s);return c?(r&&r(e.tr.setSelection(new p4(c))),!0):!1}}function Pze(e,t,n){if(!e||!e.editable)return!1;let r=e.state.doc.resolve(t);if(!p4.valid(r))return!1;let i=e.posAtCoords({left:n.clientX,top:n.clientY});return i&&i.inside>-1&&$J.isSelectable(e.state.doc.nodeAt(i.inside))?!1:(e.dispatch(e.state.tr.setSelection(new p4(r))),!0)}function Fze(e,t){if(t.inputType!=`insertCompositionText`||!(e.state.selection instanceof p4))return!1;let{$from:n}=e.state.selection,r=n.parent.contentMatchAt(n.index()).findWrapping(e.state.schema.nodes.text);if(!r)return!1;let i=oq.empty;for(let e=r.length-1;e>=0;e--)i=oq.from(r[e].createAndFill(null,i));let a=e.state.tr.replace(n.pos,n.pos,new fq(i,0,0));return a.setSelection(ZJ.near(a.doc.resolve(n.pos+1))),e.dispatch(a),!1}function Ize(e){if(!(e.selection instanceof p4))return null;let t=document.createElement(`div`);return t.className=`ProseMirror-gapcursor`,rQ.create(e.doc,[eQ.widget(e.selection.head,t,{key:`gapcursor`})])}var g4=200,_4=function(){};_4.prototype.append=function(e){return e.length?(e=_4.from(e),!this.length&&e||e.length<g4&&this.leafAppend(e)||this.length<g4&&e.leafPrepend(this)||this.appendInner(e)):this},_4.prototype.prepend=function(e){return e.length?_4.from(e).append(this):this},_4.prototype.appendInner=function(e){return new Lze(this,e)},_4.prototype.slice=function(e,t){return e===void 0&&(e=0),t===void 0&&(t=this.length),e>=t?_4.empty:this.sliceInner(Math.max(0,e),Math.min(this.length,t))},_4.prototype.get=function(e){if(!(e<0||e>=this.length))return this.getInner(e)},_4.prototype.forEach=function(e,t,n){t===void 0&&(t=0),n===void 0&&(n=this.length),t<=n?this.forEachInner(e,t,n,0):this.forEachInvertedInner(e,t,n,0)},_4.prototype.map=function(e,t,n){t===void 0&&(t=0),n===void 0&&(n=this.length);var r=[];return this.forEach(function(t,n){return r.push(e(t,n))},t,n),r},_4.from=function(e){return e instanceof _4?e:e&&e.length?new v4(e):_4.empty};var v4=function(e){function t(t){e.call(this),this.values=t}e&&(t.__proto__=e),t.prototype=Object.create(e&&e.prototype),t.prototype.constructor=t;var n={length:{configurable:!0},depth:{configurable:!0}};return t.prototype.flatten=function(){return this.values},t.prototype.sliceInner=function(e,n){return e==0&&n==this.length?this:new t(this.values.slice(e,n))},t.prototype.getInner=function(e){return this.values[e]},t.prototype.forEachInner=function(e,t,n,r){for(var i=t;i<n;i++)if(e(this.values[i],r+i)===!1)return!1},t.prototype.forEachInvertedInner=function(e,t,n,r){for(var i=t-1;i>=n;i--)if(e(this.values[i],r+i)===!1)return!1},t.prototype.leafAppend=function(e){if(this.length+e.length<=g4)return new t(this.values.concat(e.flatten()))},t.prototype.leafPrepend=function(e){if(this.length+e.length<=g4)return new t(e.flatten().concat(this.values))},n.length.get=function(){return this.values.length},n.depth.get=function(){return 0},Object.defineProperties(t.prototype,n),t}(_4);_4.empty=new v4([]);var Lze=function(e){function t(t,n){e.call(this),this.left=t,this.right=n,this.length=t.length+n.length,this.depth=Math.max(t.depth,n.depth)+1}return e&&(t.__proto__=e),t.prototype=Object.create(e&&e.prototype),t.prototype.constructor=t,t.prototype.flatten=function(){return this.left.flatten().concat(this.right.flatten())},t.prototype.getInner=function(e){return e<this.left.length?this.left.get(e):this.right.get(e-this.left.length)},t.prototype.forEachInner=function(e,t,n,r){var i=this.left.length;if(t<i&&this.left.forEachInner(e,t,Math.min(n,i),r)===!1||n>i&&this.right.forEachInner(e,Math.max(t-i,0),Math.min(this.length,n)-i,r+i)===!1)return!1},t.prototype.forEachInvertedInner=function(e,t,n,r){var i=this.left.length;if(t>i&&this.right.forEachInvertedInner(e,t-i,Math.max(n,i)-i,r+i)===!1||n<i&&this.left.forEachInvertedInner(e,Math.min(t,i),n,r)===!1)return!1},t.prototype.sliceInner=function(e,t){if(e==0&&t==this.length)return this;var n=this.left.length;return t<=n?this.left.slice(e,t):e>=n?this.right.slice(e-n,t-n):this.left.slice(e,n).append(this.right.slice(0,t-n))},t.prototype.leafAppend=function(e){var n=this.right.leafAppend(e);if(n)return new t(this.left,n)},t.prototype.leafPrepend=function(e){var n=this.left.leafPrepend(e);if(n)return new t(n,this.right)},t.prototype.appendInner=function(e){return this.left.depth>=Math.max(this.right.depth,e.depth)+1?new t(this.left,new t(this.right,e)):new t(this,e)},t}(_4),Rze=500,y4=class e{constructor(e,t){this.items=e,this.eventCount=t}popEvent(t,n){if(this.eventCount==0)return null;let r=this.items.length;for(;;r--)if(this.items.get(r-1).selection){--r;break}let i,a;n&&(i=this.remapping(r,this.items.length),a=i.maps.length);let o=t.tr,s,c,l=[],u=[];return this.items.forEach((t,n)=>{if(!t.step){i||(i=this.remapping(r,n+1),a=i.maps.length),a--,u.push(t);return}if(i){u.push(new b4(t.map));let e=t.step.map(i.slice(a)),n;e&&o.maybeStep(e).doc&&(n=o.mapping.maps[o.mapping.maps.length-1],l.push(new b4(n,void 0,void 0,l.length+u.length))),a--,n&&i.appendMap(n,a)}else o.maybeStep(t.step);if(t.selection)return s=i?t.selection.map(i.slice(a)):t.selection,c=new e(this.items.slice(0,r).append(u.reverse().concat(l)),this.eventCount-1),!1},this.items.length,0),{remaining:c,transform:o,selection:s}}addTransform(t,n,r,i){let a=[],o=this.eventCount,s=this.items,c=!i&&s.length?s.get(s.length-1):null;for(let e=0;e<t.steps.length;e++){let r=t.steps[e].invert(t.docs[e]),l=new b4(t.mapping.maps[e],r,n),u;(u=c&&c.merge(l))&&(l=u,e?a.pop():s=s.slice(0,s.length-1)),a.push(l),n&&=(o++,void 0),i||(c=l)}let l=o-r.depth;return l>Bze&&(s=zze(s,l),o-=l),new e(s.append(a),o)}remapping(e,t){let n=new uJ;return this.items.forEach((t,r)=>{let i=t.mirrorOffset!=null&&r-t.mirrorOffset>=e?n.maps.length-t.mirrorOffset:void 0;n.appendMap(t.map,i)},e,t),n}addMaps(t){return this.eventCount==0?this:new e(this.items.append(t.map(e=>new b4(e))),this.eventCount)}rebased(t,n){if(!this.eventCount)return this;let r=[],i=Math.max(0,this.items.length-n),a=t.mapping,o=t.steps.length,s=this.eventCount;this.items.forEach(e=>{e.selection&&s--},i);let c=n;this.items.forEach(e=>{let n=a.getMirror(--c);if(n==null)return;o=Math.min(o,n);let i=a.maps[n];if(e.step){let o=t.steps[n].invert(t.docs[n]),l=e.selection&&e.selection.map(a.slice(c+1,n));l&&s++,r.push(new b4(i,o,l))}else r.push(new b4(i))},i);let l=[];for(let e=n;e<o;e++)l.push(new b4(a.maps[e]));let u=new e(this.items.slice(0,i).append(l).append(r),s);return u.emptyItemCount()>Rze&&(u=u.compress(this.items.length-r.length)),u}emptyItemCount(){let e=0;return this.items.forEach(t=>{t.step||e++}),e}compress(t=this.items.length){let n=this.remapping(0,t),r=n.maps.length,i=[],a=0;return this.items.forEach((e,o)=>{if(o>=t)i.push(e),e.selection&&a++;else if(e.step){let t=e.step.map(n.slice(r)),o=t&&t.getMap();if(r--,o&&n.appendMap(o,r),t){let s=e.selection&&e.selection.map(n.slice(r));s&&a++;let c=new b4(o.invert(),t,s),l,u=i.length-1;(l=i.length&&i[u].merge(c))?i[u]=l:i.push(c)}}else e.map&&r--},this.items.length,0),new e(_4.from(i.reverse()),a)}};y4.empty=new y4(_4.empty,0);function zze(e,t){let n;return e.forEach((e,r)=>{if(e.selection&&t--==0)return n=r,!1}),e.slice(n)}var b4=class e{constructor(e,t,n,r){this.map=e,this.step=t,this.selection=n,this.mirrorOffset=r}merge(t){if(this.step&&t.step&&!t.selection){let n=t.step.merge(this.step);if(n)return new e(n.getMap().invert(),n,this.selection)}}},x4=class{constructor(e,t,n,r,i){this.done=e,this.undone=t,this.prevRanges=n,this.prevTime=r,this.prevComposition=i}},Bze=20;function Vze(e,t,n,r){let i=n.getMeta(D4),a;if(i)return i.historyState;n.getMeta(Wze)&&(e=new x4(e.done,e.undone,null,0,-1));let o=n.getMeta(`appendedTransaction`);if(n.steps.length==0)return e;if(o&&o.getMeta(D4))return o.getMeta(D4).redo?new x4(e.done.addTransform(n,void 0,r,E4(t)),e.undone,S4(n.mapping.maps),e.prevTime,e.prevComposition):new x4(e.done,e.undone.addTransform(n,void 0,r,E4(t)),null,e.prevTime,e.prevComposition);if(n.getMeta(`addToHistory`)!==!1&&!(o&&o.getMeta(`addToHistory`)===!1)){let i=n.getMeta(`composition`),a=e.prevTime==0||!o&&e.prevComposition!=i&&(e.prevTime<(n.time||0)-r.newGroupDelay||!Hze(n,e.prevRanges)),s=o?C4(e.prevRanges,n.mapping):S4(n.mapping.maps);return new x4(e.done.addTransform(n,a?t.selection.getBookmark():void 0,r,E4(t)),y4.empty,s,n.time,i??e.prevComposition)}else if(a=n.getMeta(`rebased`))return new x4(e.done.rebased(n,a),e.undone.rebased(n,a),C4(e.prevRanges,n.mapping),e.prevTime,e.prevComposition);else return new x4(e.done.addMaps(n.mapping.maps),e.undone.addMaps(n.mapping.maps),C4(e.prevRanges,n.mapping),e.prevTime,e.prevComposition)}function Hze(e,t){if(!t)return!1;if(!e.docChanged)return!0;let n=!1;return e.mapping.maps[0].forEach((e,r)=>{for(let i=0;i<t.length;i+=2)e<=t[i+1]&&r>=t[i]&&(n=!0)}),n}function S4(e){let t=[];for(let n=e.length-1;n>=0&&t.length==0;n--)e[n].forEach((e,n,r,i)=>t.push(r,i));return t}function C4(e,t){if(!e)return null;let n=[];for(let r=0;r<e.length;r+=2){let i=t.map(e[r],1),a=t.map(e[r+1],-1);i<=a&&n.push(i,a)}return n}function Uze(e,t,n){let r=E4(t),i=D4.get(t).spec.config,a=(n?e.undone:e.done).popEvent(t,r);if(!a)return null;let o=a.selection.resolve(a.transform.doc),s=(n?e.done:e.undone).addTransform(a.transform,t.selection.getBookmark(),i,r),c=new x4(n?s:a.remaining,n?a.remaining:s,null,0,-1);return a.transform.setSelection(o).setMeta(D4,{redo:n,historyState:c})}var w4=!1,T4=null;function E4(e){let t=e.plugins;if(T4!=t){w4=!1,T4=t;for(let e=0;e<t.length;e++)if(t[e].spec.historyPreserveItems){w4=!0;break}}return w4}var D4=new mY(`history`),Wze=new mY(`closeHistory`);function Gze(e={}){return e={depth:e.depth||100,newGroupDelay:e.newGroupDelay||500},new dY({key:D4,state:{init(){return new x4(y4.empty,y4.empty,null,0,-1)},apply(t,n,r){return Vze(n,r,t,e)}},config:e,props:{handleDOMEvents:{beforeinput(e,t){let n=t.inputType,r=n==`historyUndo`?k4:n==`historyRedo`?A4:null;return!r||!e.editable?!1:(t.preventDefault(),r(e.state,e.dispatch))}}}})}function O4(e,t){return(n,r)=>{let i=D4.getState(n);if(!i||(e?i.undone:i.done).eventCount==0)return!1;if(r){let a=Uze(i,n,e);a&&r(t?a.scrollIntoView():a)}return!0}}var k4=O4(!1,!0),A4=O4(!0,!0);u1.create({name:`characterCount`,addOptions(){return{limit:null,autoTrim:!0,mode:`textSize`,textCounter:e=>e.length,wordCounter:e=>e.split(` `).filter(e=>e!==``).length}},addStorage(){return{characters:()=>0,words:()=>0}},onBeforeCreate(){this.storage.characters=e=>{let t=e?.node||this.editor.state.doc;if((e?.mode||this.options.mode)===`textSize`){let e=t.textBetween(0,t.content.size,void 0,` `);return this.options.textCounter(e)}return t.nodeSize},this.storage.words=e=>{let t=e?.node||this.editor.state.doc,n=t.textBetween(0,t.content.size,` `,` `);return this.options.wordCounter(n)}},addProseMirrorPlugins(){let e=!1;return[new dY({key:new mY(`characterCount`),appendTransaction:(t,n,r)=>{if(e)return;let i=this.options.limit,a=this.options.autoTrim;if(i==null||i===0||a===!1){e=!0;return}let o=this.storage.characters({node:r.doc});if(o>i){let t=o-i;console.warn(`[CharacterCount] Initial content exceeded limit of ${i} characters. Content was automatically trimmed.`);let n=r.tr.deleteRange(0,t);return e=!0,n}e=!0},filterTransaction:(e,t)=>{let n=this.options.limit;if(!e.docChanged||n===0||n==null)return!0;let r=this.storage.characters({node:t.doc}),i=this.storage.characters({node:e.doc});if(i<=n||r>n&&i>n&&i<=r)return!0;if(r>n&&i>n&&i>r||!e.getMeta(`paste`))return!1;let a=e.selection.$head.pos,o=a-(i-n),s=a;return e.deleteRange(o,s),!(this.storage.characters({node:e.doc})>n)}})]}});var Kze=u1.create({name:`dropCursor`,addOptions(){return{color:`currentColor`,width:1,class:void 0}},addProseMirrorPlugins(){return[Dze(this.options)]}});u1.create({name:`focus`,addOptions(){return{className:`has-focus`,mode:`all`}},addProseMirrorPlugins(){return[new dY({key:new mY(`focus`),props:{decorations:({doc:e,selection:t})=>{let{isEditable:n,isFocused:r}=this.editor,{anchor:i}=t,a=[];if(!n||!r)return rQ.create(e,[]);let o=0;this.options.mode===`deepest`&&e.descendants((e,t)=>{if(!e.isText){if(!(i>=t&&i<=t+e.nodeSize-1))return!1;o+=1}});let s=0;return e.descendants((e,t)=>{if(e.isText||!(i>=t&&i<=t+e.nodeSize-1))return!1;if(s+=1,this.options.mode===`deepest`&&o-s>0||this.options.mode===`shallowest`&&s>1)return this.options.mode===`deepest`;a.push(eQ.node(t,t+e.nodeSize,{class:this.options.className}))}),rQ.create(e,a)}}})]}});var qze=u1.create({name:`gapCursor`,addProseMirrorPlugins(){return[Mze()]},extendNodeSchema(e){return{allowGapCursor:d$(s$(e,`allowGapCursor`,{name:e.name,options:e.options,storage:e.storage}))??null}}}),j4=`placeholder`,M4=new mY(`tiptap__placeholder`);function N4(e){let{editor:t,placeholder:n,dataAttribute:r,pos:i,node:a,isEmptyDoc:o,hasAnchor:s,classes:{emptyNode:c,emptyEditor:l}}=e,u=[c];return o&&u.push(l),eQ.node(i,i+a.nodeSize,{class:u.join(` `),[r]:typeof n==`function`?n({editor:t,node:a,pos:i,hasAnchor:s}):n})}function P4(e,t){return typeof e==`function`?e(t):e}function F4({editor:e,options:t,dataAttribute:n,doc:r,selection:i,from:a,to:o}){let{anchor:s}=i,c=[],l=e.isEmpty;return r.nodesBetween(a,o,(r,i)=>{let a=s>=i&&s<=i+r.nodeSize,o=!r.isLeaf&&M$(r);return r.type.isTextblock&&(a||!t.showOnlyCurrent)&&o&&c.push(N4({editor:e,isEmptyDoc:l,dataAttribute:n,hasAnchor:a,placeholder:t.placeholder,classes:{emptyEditor:t.emptyEditorClass,emptyNode:P4(t.emptyNodeClass,{editor:e,node:r,pos:i,hasAnchor:a})},node:r,pos:i})),t.includeChildren}),c}function I4({editor:e,options:t,dataAttribute:n,doc:r,selection:i}){if(!(e.isEditable||!t.showOnlyWhenEditable))return null;let{anchor:a}=i,o=[],s=e.isEmpty;if(t.showOnlyCurrent&&!t.includeChildren){let i=r.resolve(a),c=i.depth>0?i.node(1):i.nodeAfter,l=i.depth>0?i.before(1):a;if(c&&c.type.isTextblock&&M$(c)){let r=a>=l&&a<=l+c.nodeSize;o.push(N4({editor:e,isEmptyDoc:s,dataAttribute:n,hasAnchor:r,placeholder:t.placeholder,classes:{emptyEditor:t.emptyEditorClass,emptyNode:P4(t.emptyNodeClass,{editor:e,node:c,pos:l,hasAnchor:r})},node:c,pos:l}))}}else o.push(...F4({editor:e,options:t,dataAttribute:n,doc:r,selection:i,from:0,to:r.content.size}));return rQ.create(r,o)}function L4(e,t){let n=e.resolve(t);if(n.depth===0){let e=n.nodeAfter??n.nodeBefore;if(!e)return{from:t,to:t};let r=n.nodeAfter?t:t-e.nodeSize;return{from:r,to:r+e.nodeSize}}let r=n.before(1);return{from:r,to:r+n.node(1).nodeSize}}function R4(e,t){return{from:Math.max(0,t.from-1),to:Math.min(e.content.size,t.to-1)}}function Jze(e,t,n){let r=[];return e.forEach((e,i)=>{let a=i,o=a+e.nodeSize,s=a+1,c=o+1;s<n&&c>t&&r.push({from:a,to:o})}),r}function Yze(e){if(e.length===0)return[];let t=[...e].sort((e,t)=>e.from-t.from),n=[{...t[0]}];for(let e=1;e<t.length;e+=1){let r=n[n.length-1],i=t[e];i.from<=r.to?r.to=Math.max(r.to,i.to):n.push({...i})}return n}function Xze(e,t){let n=Jze(e,t.from,t.to);return n.push(R4(e,L4(e,t.from))),t.to>t.from?n.push(R4(e,L4(e,Math.min(t.to,e.content.size+1)-1))):t.from<e.content.size+1&&n.push(R4(e,L4(e,Math.min(t.from+1,e.content.size)))),n}function Zze(e,t,n){let r=[];if(e.docChanged){let t=T$(e);for(let e of t)r.push(...Xze(n.doc,e.newRange))}return e.selectionSet&&(r.push(R4(n.doc,L4(n.doc,e.mapping.map(t.selection.anchor)))),r.push(R4(n.doc,L4(n.doc,n.selection.anchor)))),Yze(r)}function Qze(e,t,n){let r=Math.max(0,Math.min(e,n.content.size));return{from:r,to:Math.max(r,Math.min(t,n.content.size))}}function $ze({decorations:e,ranges:t,editor:n,options:r,dataAttribute:i,doc:a,selection:o}){let s=e;for(let e of t){let{from:t,to:c}=Qze(e.from,e.to,a),l=s.find(t,c).filter(e=>e.from>=t&&e.to<=c);l.length&&(s=s.remove(l));let u=F4({editor:n,options:r,dataAttribute:i,doc:a,selection:o,from:t,to:c});u.length&&(s=s.add(a,u))}return s}function eBe({editor:e,options:t,dataAttribute:n}){return{init(r,i){return I4({editor:e,options:t,dataAttribute:n,doc:i.doc,selection:i.selection})??rQ.empty},apply(r,i,a,o){return!r.docChanged&&!r.selectionSet?i:$ze({decorations:i.map(r.mapping,r.doc),ranges:Zze(r,a,o),editor:e,options:t,dataAttribute:n,doc:o.doc,selection:o.selection})}}}function tBe(e){return e.replace(/\s+/g,`-`).replace(/[^a-zA-Z0-9-]/g,``).replace(/^[0-9-]+/,``).replace(/^-+/,``).toLowerCase()}function nBe({editor:e,options:t}){let n=t.dataAttribute?`data-${tBe(t.dataAttribute)}`:`data-${j4}`,r=t.showOnlyCurrent&&!t.includeChildren;return new dY({key:M4,...r?{}:{state:eBe({editor:e,options:t,dataAttribute:n})},props:{decorations:r?({doc:r,selection:i})=>I4({editor:e,options:t,dataAttribute:n,doc:r,selection:i}):n=>t.showOnlyWhenEditable&&!e.isEditable?rQ.empty:M4.getState(n)??rQ.empty}})}u1.create({name:`placeholder`,addOptions(){return{emptyEditorClass:`is-editor-empty`,emptyNodeClass:`is-empty`,dataAttribute:j4,placeholder:`Write something …`,showOnlyWhenEditable:!0,showOnlyCurrent:!0,includeChildren:!1}},addProseMirrorPlugins(){return[nBe({editor:this.editor,options:this.options})]}});function z4(e,t){return!e.selection.empty&&!N$(e.selection)&&t.isEditable}function rBe(e,t){return z4(e,t)&&!t.isFocused&&!t.view.dragging}function iBe(){var e;(e=window.getSelection())==null||e.removeAllRanges()}function aBe(e){e.focus()}u1.create({name:`selection`,addOptions(){return{className:`selection`}},addProseMirrorPlugins(){let{editor:e,options:t}=this;return[new dY({key:new mY(`selection`),props:{decorations(n){return rBe(n,e)?rQ.create(n.doc,[eQ.inline(n.selection.from,n.selection.to,{class:t.className})]):null},handleDOMEvents:{blur(t){return z4(t.state,e)&&iBe(),!1},focus(t){return z4(t.state,e)&&requestAnimationFrame(()=>{!e.isDestroyed&&t.hasFocus()&&aBe(t)}),!1}}}})]}});function B4({types:e,node:t}){return t&&Array.isArray(e)&&e.includes(t.type)||t?.type===e}var oBe=u1.create({name:`trailingNode`,addOptions(){return{node:void 0,notAfter:[]}},addProseMirrorPlugins(){let e=new mY(this.name),t=this.options.node||this.editor.schema.topNodeType.contentMatch.defaultType?.name||`paragraph`,n=Object.entries(this.editor.schema.nodes).map(([,e])=>e).filter(e=>(this.options.notAfter||[]).concat(t).includes(e.name));return[new dY({key:e,appendTransaction:(n,r,i)=>{let{doc:a,tr:o,schema:s}=i,c=e.getState(i),l=a.content.size,u=s.nodes[t];if(!n.some(e=>e.getMeta(`skipTrailingNode`))&&c)return o.insert(l,u.create())},state:{init:(e,t)=>{let r=t.tr.doc.lastChild;return!B4({node:r,types:n})},apply:(e,t)=>{if(!e.docChanged||e.getMeta(`__uniqueIDTransaction`))return t;let r=e.doc.lastChild;return!B4({node:r,types:n})}}})]}}),sBe=u1.create({name:`undoRedo`,addOptions(){return{depth:100,newGroupDelay:500}},addCommands(){return{undo:()=>({state:e,dispatch:t})=>k4(e,t),redo:()=>({state:e,dispatch:t})=>A4(e,t)}},addProseMirrorPlugins(){return[Gze(this.options)]},addKeyboardShortcuts(){return{"Mod-z":()=>this.editor.commands.undo(),"Shift-Mod-z":()=>this.editor.commands.redo(),"Mod-y":()=>this.editor.commands.redo(),"Mod-я":()=>this.editor.commands.undo(),"Shift-Mod-я":()=>this.editor.commands.redo()}}}),cBe=u1.create({name:`starterKit`,addExtensions(){let e=[];return this.options.bold!==!1&&e.push(YLe.configure(this.options.bold)),this.options.blockquote!==!1&&e.push(WLe.configure(this.options.blockquote)),this.options.bulletList!==!1&&e.push(B2.configure(this.options.bulletList)),this.options.code!==!1&&e.push(QLe.configure(this.options.code)),this.options.codeBlock!==!1&&e.push(tRe.configure(this.options.codeBlock)),this.options.document!==!1&&e.push(nRe.configure(this.options.document)),this.options.dropcursor!==!1&&e.push(Kze.configure(this.options.dropcursor)),this.options.gapcursor!==!1&&e.push(qze.configure(this.options.gapcursor)),this.options.hardBreak!==!1&&e.push(rRe.configure(this.options.hardBreak)),this.options.heading!==!1&&e.push(iRe.configure(this.options.heading)),this.options.undoRedo!==!1&&e.push(sBe.configure(this.options.undoRedo)),this.options.horizontalRule!==!1&&e.push(aRe.configure(this.options.horizontalRule)),this.options.italic!==!1&&e.push(uRe.configure(this.options.italic)),this.options.listItem!==!1&&e.push(Z2.configure(this.options.listItem)),this.options.listKeymap!==!1&&e.push(n4.configure(this.options?.listKeymap)),this.options.link!==!1&&e.push(L2.configure(this.options?.link)),this.options.orderedList!==!1&&e.push(l4.configure(this.options.orderedList)),this.options.paragraph!==!1&&e.push(xze.configure(this.options.paragraph)),this.options.strike!==!1&&e.push(wze.configure(this.options.strike)),this.options.text!==!1&&e.push(Tze.configure(this.options.text)),this.options.underline!==!1&&e.push(f4.configure(this.options?.underline)),this.options.trailingNode!==!1&&e.push(oBe.configure(this.options?.trailingNode)),e}}),lBe=u1.create({name:`textAlign`,addOptions(){return{types:[],alignments:[`left`,`center`,`right`,`justify`],defaultAlignment:null}},addGlobalAttributes(){return[{types:this.options.types,attributes:{textAlign:{default:this.options.defaultAlignment,parseHTML:e=>{let t=e.style.textAlign;return this.options.alignments.includes(t)?t:this.options.defaultAlignment},renderHTML:e=>e.textAlign?{style:`text-align: ${e.textAlign}`}:{}}}}]},addCommands(){return{setTextAlign:e=>({commands:t})=>this.options.alignments.includes(e)?this.options.types.map(n=>t.updateAttributes(n,{textAlign:e})).some(e=>e):!1,unsetTextAlign:()=>({commands:e})=>this.options.types.map(t=>e.resetAttributes(t,`textAlign`)).some(e=>e),toggleTextAlign:e=>({editor:t,commands:n})=>this.options.alignments.includes(e)?t.isActive({textAlign:e})?n.unsetTextAlign():n.setTextAlign(e):!1}},addKeyboardShortcuts(){return{"Mod-Shift-l":()=>this.editor.commands.setTextAlign(`left`),"Mod-Shift-e":()=>this.editor.commands.setTextAlign(`center`),"Mod-Shift-r":()=>this.editor.commands.setTextAlign(`right`),"Mod-Shift-j":()=>this.editor.commands.setTextAlign(`justify`)}}}),uBe=20,V4=(e,t=0)=>{let n=[];return!e.children.length||t>uBe||Array.from(e.children).forEach(e=>{e.tagName===`SPAN`?n.push(e):e.children.length&&n.push(...V4(e,t+1))}),n},dBe=e=>{if(!e.children.length)return;let t=V4(e);t&&t.forEach(e=>{var t;let n=e.getAttribute(`style`),r=(t=e.parentElement)==null||(t=t.closest(`span`))==null?void 0:t.getAttribute(`style`);e.setAttribute(`style`,`${r};${n}`)})},H4=o1.create({name:`textStyle`,priority:101,addOptions(){return{HTMLAttributes:{},mergeNestedSpanStyles:!0}},parseHTML(){return[{tag:`span`,consuming:!1,getAttrs:e=>e.hasAttribute(`style`)?(this.options.mergeNestedSpanStyles&&dBe(e),{}):!1}]},renderHTML({HTMLAttributes:e}){return[`span`,h$(this.options.HTMLAttributes,e),0]},addCommands(){return{toggleTextStyle:e=>({commands:t})=>t.toggleMark(this.name,e),removeEmptyTextStyle:()=>({tr:e})=>{let{selection:t}=e;return e.doc.nodesBetween(t.from,t.to,(t,n)=>{if(!t.isInline)return!0;t.marks.filter(e=>e.type===this.type).some(e=>Object.values(e.attrs).some(e=>!!e))||e.removeMark(n,n+t.nodeSize,this.type)}),!0}}}}),fBe=u1.create({name:`backgroundColor`,addOptions(){return{types:[`textStyle`]}},addGlobalAttributes(){return[{types:this.options.types,attributes:{backgroundColor:{default:null,parseHTML:e=>(X$(e,`background-color`)??e.style.backgroundColor)?.replace(/['"]+/g,``),renderHTML:e=>e.backgroundColor?{style:`background-color: ${e.backgroundColor}`}:{}}}}]},addCommands(){return{setBackgroundColor:e=>({chain:t})=>t().setMark(`textStyle`,{backgroundColor:e}).run(),unsetBackgroundColor:()=>({chain:e})=>e().setMark(`textStyle`,{backgroundColor:null}).removeEmptyTextStyle().run()}}}),U4=u1.create({name:`color`,addOptions(){return{types:[`textStyle`]}},addGlobalAttributes(){return[{types:this.options.types,attributes:{color:{default:null,parseHTML:e=>(X$(e,`color`)??e.style.color)?.replace(/['"]+/g,``),renderHTML:e=>e.color?{style:`color: ${e.color}`}:{}}}}]},addCommands(){return{setColor:e=>({chain:t})=>t().setMark(`textStyle`,{color:e}).run(),unsetColor:()=>({chain:e})=>e().setMark(`textStyle`,{color:null}).removeEmptyTextStyle().run()}}}),pBe=u1.create({name:`fontFamily`,addOptions(){return{types:[`textStyle`]}},addGlobalAttributes(){return[{types:this.options.types,attributes:{fontFamily:{default:null,parseHTML:e=>X$(e,`font-family`)??e.style.fontFamily,renderHTML:e=>e.fontFamily?{style:`font-family: ${e.fontFamily}`}:{}}}}]},addCommands(){return{setFontFamily:e=>({chain:t})=>t().setMark(`textStyle`,{fontFamily:e}).run(),unsetFontFamily:()=>({chain:e})=>e().setMark(`textStyle`,{fontFamily:null}).removeEmptyTextStyle().run()}}}),mBe=u1.create({name:`fontSize`,addOptions(){return{types:[`textStyle`]}},addGlobalAttributes(){return[{types:this.options.types,attributes:{fontSize:{default:null,parseHTML:e=>X$(e,`font-size`)??e.style.fontSize,renderHTML:e=>e.fontSize?{style:`font-size: ${e.fontSize}`}:{}}}}]},addCommands(){return{setFontSize:e=>({chain:t})=>t().setMark(`textStyle`,{fontSize:e}).run(),unsetFontSize:()=>({chain:e})=>e().setMark(`textStyle`,{fontSize:null}).removeEmptyTextStyle().run()}}}),hBe=u1.create({name:`lineHeight`,addOptions(){return{types:[`textStyle`]}},addGlobalAttributes(){return[{types:this.options.types,attributes:{lineHeight:{default:null,parseHTML:e=>X$(e,`line-height`)??e.style.lineHeight,renderHTML:e=>e.lineHeight?{style:`line-height: ${e.lineHeight}`}:{}}}}]},addCommands(){return{setLineHeight:e=>({chain:t})=>t().setMark(`textStyle`,{lineHeight:e}).run(),unsetLineHeight:()=>({chain:e})=>e().setMark(`textStyle`,{lineHeight:null}).removeEmptyTextStyle().run()}}});u1.create({name:`textStyleKit`,addExtensions(){let e=[];return this.options.backgroundColor!==!1&&e.push(fBe.configure(this.options.backgroundColor)),this.options.color!==!1&&e.push(U4.configure(this.options.color)),this.options.fontFamily!==!1&&e.push(pBe.configure(this.options.fontFamily)),this.options.fontSize!==!1&&e.push(mBe.configure(this.options.fontSize)),this.options.lineHeight!==!1&&e.push(hBe.configure(this.options.lineHeight)),this.options.textStyle!==!1&&e.push(H4.configure(this.options.textStyle)),e}});var gBe=U4,_Be=/(?:^|\s)(!\[(.+|:?)]\((\S+)(?:(?:\s+)["'](\S+)["'])?\))$/,vBe=g1.create({name:`image`,addOptions(){return{inline:!1,allowBase64:!1,HTMLAttributes:{},resize:!1}},inline(){return this.options.inline},group(){return this.options.inline?`inline`:`block`},draggable:!0,addAttributes(){return{src:{default:null},alt:{default:null},title:{default:null},width:{default:null},height:{default:null}}},parseHTML(){return[{tag:this.options.allowBase64?`img[src]`:`img[src]:not([src^="data:"])`}]},renderHTML({HTMLAttributes:e}){return[`img`,h$(this.options.HTMLAttributes,e)]},parseMarkdown:(e,t)=>t.createNode(`image`,{src:e.href,title:e.title,alt:e.text}),renderMarkdown:e=>{let t=e.attrs?.src??``,n=e.attrs?.alt??``,r=e.attrs?.title??``;return r?`![${n}](${t} "${r}")`:`![${n}](${t})`},addNodeView(){if(!this.options.resize||!this.options.resize.enabled||typeof document>`u`)return null;let{directions:e,minWidth:t,minHeight:n,alwaysPreserveAspectRatio:r}=this.options.resize,i=new Set([`src`,`width`,`height`]);return({node:a,getPos:o,HTMLAttributes:s,editor:c})=>{let l=document.createElement(`img`);l.draggable=!1;let u=h$(this.options.HTMLAttributes,s);Object.entries(u).forEach(([e,t])=>{if(t!=null)switch(e){case`src`:case`width`:case`height`:break;default:l.setAttribute(e,t)}}),u.src!==null&&(l.src=u.src);let d={...s},f=e=>{if(typeof e==`string`&&e!==``){l.getAttribute(`src`)!==e&&(l.src=e);return}l.hasAttribute(`src`)&&l.removeAttribute(`src`),l.src!==``&&(l.src=``)};f(s.src);let p=new VIe({element:l,editor:c,node:a,getPos:o,onResize:(e,t)=>{l.style.width=`${e}px`,l.style.height=`${t}px`},onCommit:(e,t)=>{let n=o();n!==void 0&&this.editor.chain().setNodeSelection(n).updateAttributes(this.name,{width:e,height:t}).run()},onUpdate:e=>{if(e.type!==a.type)return!1;let t=g$(e,c.extensionManager.attributes.filter(t=>t.type===e.type.name));return Object.keys(d).forEach(e=>{!i.has(e)&&!(e in t)&&l.removeAttribute(e)}),Object.entries(t).forEach(([e,t])=>{i.has(e)||(t==null?l.removeAttribute(e):l.setAttribute(e,t))}),f(t.src),d=t,!0},options:{directions:e,min:{width:t,height:n},preserveAspectRatio:r===!0}}),m=p.dom,h=()=>{m.style.visibility=``,m.style.pointerEvents=``};return m.style.visibility=`hidden`,m.style.pointerEvents=`none`,l.complete&&l.naturalWidth>0?h():(l.onload=h,l.onerror=h),p}},addCommands(){return{setImage:e=>({commands:t})=>t.insertContent({type:this.name,attrs:e})}},addInputRules(){return[p1({find:_Be,type:this.type,getAttributes:e=>{let[,,t,n,r]=e;return{src:n,alt:t,title:r}}})]}});function W4({content:e,onChange:t,placeholder:n}){let{t:r}=U(),i=LLe({extensions:[cBe.configure({heading:!1,codeBlock:!1,code:!1}),Eze,HRe.configure({openOnClick:!1,HTMLAttributes:{target:`_blank`,rel:`noopener noreferrer`}}),lBe.configure({types:[`paragraph`]}),H4,gBe,vBe.configure({HTMLAttributes:{style:`max-width: 100%; height: auto;`}})],content:e,onUpdate:({editor:e})=>{t(e.getHTML())},editorProps:{attributes:{class:`prose prose-invert prose-sm max-w-none focus:outline-none min-h-[120px] px-3 py-2`,placeholder:n||``}}});if(!i)return null;let a=({onClick:e,isActive:t=!1,children:n,title:r})=>(0,G.jsx)(`button`,{type:`button`,onClick:e,title:r,className:`p-1.5 rounded hover:bg-bambu-dark-tertiary transition-colors ${t?`bg-bambu-dark-tertiary text-bambu-green`:`text-bambu-gray`}`,children:n});return(0,G.jsxs)(`div`,{className:`border border-bambu-dark-tertiary rounded-lg overflow-hidden bg-bambu-dark`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-0.5 p-1.5 border-b border-bambu-dark-tertiary bg-bambu-dark-secondary`,children:[(0,G.jsx)(a,{onClick:()=>i.chain().focus().toggleBold().run(),isActive:i.isActive(`bold`),title:r(`richTextEditor.bold`),children:(0,G.jsx)(Jo,{className:`w-4 h-4`})}),(0,G.jsx)(a,{onClick:()=>i.chain().focus().toggleItalic().run(),isActive:i.isActive(`italic`),title:r(`richTextEditor.italic`),children:(0,G.jsx)(Wc,{className:`w-4 h-4`})}),(0,G.jsx)(a,{onClick:()=>i.chain().focus().toggleUnderline().run(),isActive:i.isActive(`underline`),title:r(`richTextEditor.underline`),children:(0,G.jsx)(Lu,{className:`w-4 h-4`})}),(0,G.jsx)(`div`,{className:`w-px h-5 bg-bambu-dark-tertiary mx-1`}),(0,G.jsx)(a,{onClick:()=>i.chain().focus().toggleBulletList().run(),isActive:i.isActive(`bulletList`),title:r(`richTextEditor.bulletList`),children:(0,G.jsx)($c,{className:`w-4 h-4`})}),(0,G.jsx)(a,{onClick:()=>i.chain().focus().toggleOrderedList().run(),isActive:i.isActive(`orderedList`),title:r(`richTextEditor.numberedList`),children:(0,G.jsx)(Zc,{className:`w-4 h-4`})}),(0,G.jsx)(`div`,{className:`w-px h-5 bg-bambu-dark-tertiary mx-1`}),(0,G.jsx)(a,{onClick:()=>i.chain().focus().setTextAlign(`left`).run(),isActive:i.isActive({textAlign:`left`}),title:r(`richTextEditor.alignLeft`),children:(0,G.jsx)(Au,{className:`w-4 h-4`})}),(0,G.jsx)(a,{onClick:()=>i.chain().focus().setTextAlign(`center`).run(),isActive:i.isActive({textAlign:`center`}),title:r(`richTextEditor.alignCenter`),children:(0,G.jsx)(Ou,{className:`w-4 h-4`})}),(0,G.jsx)(a,{onClick:()=>i.chain().focus().setTextAlign(`right`).run(),isActive:i.isActive({textAlign:`right`}),title:r(`richTextEditor.alignRight`),children:(0,G.jsx)(ku,{className:`w-4 h-4`})}),(0,G.jsx)(`div`,{className:`w-px h-5 bg-bambu-dark-tertiary mx-1`}),(0,G.jsx)(a,{onClick:()=>{let e=window.prompt(`Enter URL:`);e&&i.chain().focus().setLink({href:e}).run()},isActive:i.isActive(`link`),title:r(`richTextEditor.addLink`),children:(0,G.jsx)(Xc,{className:`w-4 h-4`})}),i.isActive(`link`)&&(0,G.jsx)(a,{onClick:()=>i.chain().focus().unsetLink().run(),title:r(`richTextEditor.removeLink`),children:(0,G.jsx)(zu,{className:`w-4 h-4`})})]}),(0,G.jsx)(A1,{editor:i})]})}function G4({archiveId:e,archiveName:t,onClose:n}){let r=co(),[i,a]=(0,y.useState)(!1),[o,s]=(0,y.useState)(null),[c,l]=(0,y.useState)({}),{data:u,isLoading:d,error:f}=K({queryKey:[`archive-project-page`,e],queryFn:()=>Z.getArchiveProjectPage(e)}),p=q({mutationFn:t=>Z.updateArchiveProjectPage(e,t),onSuccess:()=>{r.invalidateQueries({queryKey:[`archive-project-page`,e]}),a(!1),l({})}});(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&(o===null?i?_():n():s(null))};return document.addEventListener(`keydown`,e),()=>document.removeEventListener(`keydown`,e)},[o,i,n]);let m=[...u?.model_pictures||[],...u?.profile_pictures||[]],h=()=>{l({title:u?.title||``,description:u?.description||``,designer:u?.designer||``,license:u?.license||``,profile_title:u?.profile_title||``,profile_description:u?.profile_description||``}),a(!0)},g=()=>{p.mutate(c)},_=()=>{a(!1),l({})},v=e=>$K.sanitize(e,{ALLOWED_TAGS:[`p`,`br`,`b`,`strong`,`i`,`em`,`u`,`a`,`ul`,`ol`,`li`,`figure`,`img`],ALLOWED_ATTR:[`href`,`src`,`target`,`rel`,`style`],ADD_ATTR:[`target`]}),b=u&&(u.title||u.description||u.designer||u.profile_title||m.length>0);return(0,G.jsxs)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:e=>{e.target===e.currentTarget&&n()},children:[(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl max-w-4xl w-full max-h-[90vh] overflow-hidden flex flex-col`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(dc,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white`,children:[`Project Page`,t&&(0,G.jsxs)(`span`,{className:`text-bambu-gray ml-2`,children:[`- `,t]})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[!i&&b&&(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:h,children:[(0,G.jsx)(Dl,{className:`w-4 h-4 mr-1`}),`Edit`]}),i&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:_,children:`Cancel`}),(0,G.jsxs)(Q,{variant:`primary`,size:`sm`,onClick:g,disabled:p.isPending,children:[(0,G.jsx)(Kl,{className:`w-4 h-4 mr-1`}),`Save`]})]}),(0,G.jsx)(`button`,{onClick:n,className:`p-2 hover:bg-bambu-dark-tertiary rounded-lg transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5 text-bambu-gray`})})]})]}),(0,G.jsxs)(`div`,{className:`flex-1 overflow-y-auto p-6`,children:[d&&(0,G.jsx)(`div`,{className:`flex items-center justify-center py-12`,children:(0,G.jsx)(`div`,{className:`animate-spin rounded-full h-8 w-8 border-2 border-bambu-green border-t-transparent`})}),f&&(0,G.jsx)(`div`,{className:`text-red-700 dark:text-red-400 text-center py-12`,children:`Failed to load project page data`}),u&&!b&&(0,G.jsxs)(`div`,{className:`text-bambu-gray text-center py-12`,children:[(0,G.jsx)(dc,{className:`w-12 h-12 mx-auto mb-4 opacity-50`}),(0,G.jsx)(`p`,{children:`No project page data found in this 3MF file.`}),(0,G.jsx)(`p`,{className:`text-sm mt-2`,children:`Project pages are typically included in files downloaded from MakerWorld.`})]}),u&&b&&(0,G.jsxs)(`div`,{className:`space-y-6`,children:[(0,G.jsxs)(`div`,{className:`space-y-4`,children:[i?(0,G.jsx)(`input`,{type:`text`,value:c.title||``,onChange:e=>l({...c,title:e.target.value}),placeholder:`Title`,className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded-lg px-4 py-2 text-white text-xl font-semibold`}):u.title&&(0,G.jsx)(`h3`,{className:`text-xl font-semibold text-white`,children:u.title}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-4 text-sm`,children:[i?(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Vu,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:c.designer||``,onChange:e=>l({...c,designer:e.target.value}),placeholder:`Designer`,className:`bg-bambu-dark border border-bambu-dark-tertiary rounded px-2 py-1 text-white`})]}):u.designer&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray`,children:[(0,G.jsx)(Vu,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:u.designer}),u.designer_user_id&&(0,G.jsx)(`a`,{href:`https://makerworld.com/en/@${u.designer_user_id}`,target:`_blank`,rel:`noopener noreferrer`,className:`text-bambu-green hover:underline`,children:(0,G.jsx)(nc,{className:`w-3 h-3`})})]}),u.creation_date&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray`,children:[(0,G.jsx)(as,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:u.creation_date})]}),i?(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(dc,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:c.license||``,onChange:e=>l({...c,license:e.target.value}),placeholder:`License`,className:`bg-bambu-dark border border-bambu-dark-tertiary rounded px-2 py-1 text-white`})]}):u.license&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray`,children:[(0,G.jsx)(dc,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:u.license})]}),u.origin&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-bambu-dark rounded text-bambu-gray`,children:u.origin})]})]}),(u.description||i)&&(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray uppercase tracking-wide`,children:`Description`}),i?(0,G.jsx)(W4,{content:c.description||``,onChange:e=>l({...c,description:e}),placeholder:`Enter description...`}):(0,G.jsx)(`div`,{className:`prose prose-invert prose-sm max-w-none text-bambu-gray-light`,dangerouslySetInnerHTML:{__html:v(u.description||``)}})]}),(u.profile_title||u.profile_description||i)&&(0,G.jsxs)(`div`,{className:`space-y-2 p-4 bg-bambu-dark rounded-lg`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray uppercase tracking-wide`,children:`Print Profile`}),i?(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`input`,{type:`text`,value:c.profile_title||``,onChange:e=>l({...c,profile_title:e.target.value}),placeholder:`Profile Title`,className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-white`}),(0,G.jsx)(W4,{content:c.profile_description||``,onChange:e=>l({...c,profile_description:e}),placeholder:`Profile description...`})]}):(0,G.jsxs)(G.Fragment,{children:[u.profile_title&&(0,G.jsx)(`p`,{className:`text-white font-medium`,children:u.profile_title}),u.profile_description&&(0,G.jsx)(`div`,{className:`prose prose-invert prose-sm max-w-none text-bambu-gray-light`,dangerouslySetInnerHTML:{__html:v(u.profile_description)}}),u.profile_user_name&&(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[`by `,u.profile_user_name]})]})]}),m.length>0&&(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`h4`,{className:`text-sm font-medium text-bambu-gray uppercase tracking-wide flex items-center gap-2`,children:[(0,G.jsx)(Vc,{className:`w-4 h-4`}),`Images (`,m.length,`)`]}),(0,G.jsx)(`div`,{className:`grid grid-cols-3 sm:grid-cols-4 md:grid-cols-5 gap-2`,children:m.map((e,t)=>(0,G.jsx)(`button`,{onClick:()=>s(t),className:`aspect-square rounded-lg overflow-hidden border border-bambu-dark-tertiary hover:border-bambu-green transition-colors`,children:(0,G.jsx)(`img`,{src:_d(e.url),alt:e.name,className:`w-full h-full object-cover`})},e.path))})]}),u.design_model_id&&(0,G.jsx)(`div`,{className:`pt-4 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`a`,{href:`https://makerworld.com/en/models/${u.design_model_id}`,target:`_blank`,rel:`noopener noreferrer`,className:`inline-flex items-center gap-2 text-bambu-green hover:underline`,children:[(0,G.jsx)(nc,{className:`w-4 h-4`}),`View on MakerWorld`]})})]})]})]}),o!==null&&m[o]&&(0,G.jsxs)(`div`,{className:`fixed inset-0 bg-black/90 flex items-center justify-center z-60`,onClick:()=>s(null),children:[(0,G.jsx)(`button`,{onClick:e=>{e.stopPropagation(),s(Math.max(0,o-1))},disabled:o===0,className:`absolute left-4 p-2 bg-bambu-dark-secondary rounded-full hover:bg-bambu-dark-tertiary disabled:opacity-30`,children:(0,G.jsx)(hs,{className:`w-6 h-6 text-white`})}),(0,G.jsx)(`img`,{src:_d(m[o].url),alt:m[o].name,className:`max-w-[90vw] max-h-[90vh] object-contain`,onClick:e=>e.stopPropagation()}),(0,G.jsx)(`button`,{onClick:e=>{e.stopPropagation(),s(Math.min(m.length-1,o+1))},disabled:o===m.length-1,className:`absolute right-4 p-2 bg-bambu-dark-secondary rounded-full hover:bg-bambu-dark-tertiary disabled:opacity-30`,children:(0,G.jsx)(ms,{className:`w-6 h-6 text-white`})}),(0,G.jsx)(`button`,{onClick:()=>s(null),className:`absolute top-4 right-4 p-2 bg-bambu-dark-secondary rounded-full hover:bg-bambu-dark-tertiary`,children:(0,G.jsx)(td,{className:`w-6 h-6 text-white`})}),(0,G.jsxs)(`div`,{className:`absolute bottom-4 text-white text-sm`,children:[o+1,` / `,m.length]})]})]})}var yBe=[.25,.5,.75,1,1.5,2,3,4];function bBe({archiveId:e,timelapseSrc:t,onClose:n,onSave:r}){let{showToast:i}=Gd(),a=(0,y.useRef)(null),o=(0,y.useRef)(null),[s,c]=(0,y.useState)(!1),[l,u]=(0,y.useState)(0),[d,f]=(0,y.useState)(0),[p,m]=(0,y.useState)(0),[h,g]=(0,y.useState)(0),[_,v]=(0,y.useState)(1),[b,x]=(0,y.useState)(null),[S,C]=(0,y.useState)(null),[w,T]=(0,y.useState)(.8),[E,D]=(0,y.useState)(!1),{data:O,isLoading:k}=K({queryKey:[`timelapse-info`,e],queryFn:()=>Z.getTimelapseInfo(e)}),{data:A}=K({queryKey:[`timelapse-thumbnails`,e],queryFn:()=>Z.getTimelapseThumbnails(e,15)}),j=q({mutationFn:()=>Z.processTimelapse(e,{trimStart:p,trimEnd:h,speed:_,saveMode:`replace`},b||void 0),onSuccess:e=>{i(e.message,`success`),r?.(),n()},onError:e=>{i(e.message||`Processing failed`,`error`)}});(0,y.useEffect)(()=>{O?.duration&&h===0&&g(O.duration)},[O?.duration,h]),(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&n()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[n]),(0,y.useEffect)(()=>{let e=a.current;if(!e)return;let t=()=>{let t=e.currentTime;u(t),t>=h&&(e.currentTime=p)},n=()=>{f(e.duration),h===0&&g(e.duration)},r=()=>c(!0),i=()=>c(!1);return e.addEventListener(`timeupdate`,t),e.addEventListener(`durationchange`,n),e.addEventListener(`play`,r),e.addEventListener(`pause`,i),()=>{e.removeEventListener(`timeupdate`,t),e.removeEventListener(`durationchange`,n),e.removeEventListener(`play`,r),e.removeEventListener(`pause`,i)}},[p,h]),(0,y.useEffect)(()=>{let e=o.current,t=a.current;!e||!t||!S||(e.currentTime=t.currentTime,e.playbackRate=t.playbackRate,s&&!E?e.play().catch(()=>{}):e.pause())},[s,S,E]),(0,y.useEffect)(()=>{o.current&&(o.current.volume=E?0:w)},[w,E]),(0,y.useEffect)(()=>{a.current&&(a.current.playbackRate=_),o.current&&(o.current.playbackRate=_)},[_]);let M=(0,y.useCallback)(()=>{let e=a.current;e&&(s?e.pause():(e.currentTime<p&&(e.currentTime=p),e.play()))},[s,p]),N=e=>{let t=a.current;t&&(t.currentTime=Math.max(p,Math.min(h,e)))},P=e=>{let t=e.target.files?.[0];t&&(S&&URL.revokeObjectURL(S),x(t),C(URL.createObjectURL(t)))},F=()=>{S&&URL.revokeObjectURL(S),x(null),C(null)};(0,y.useEffect)(()=>()=>{S&&URL.revokeObjectURL(S)},[S]);let I=h-p,L=I/_;return k?(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/80`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-3 text-white`,children:[(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin`}),`Loading video info...`]})}):(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/80`,children:(0,G.jsxs)(`div`,{className:`relative bg-bambu-dark-secondary rounded-xl max-w-5xl w-full mx-4 max-h-[90vh] overflow-hidden flex flex-col`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary shrink-0`,children:[(0,G.jsxs)(`h3`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(pc,{className:`w-5 h-5 text-bambu-green`}),`Edit Timelapse`]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Q,{variant:`primary`,size:`sm`,onClick:()=>j.mutate(),disabled:j.isPending,children:j.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),`Processing...`]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Kl,{className:`w-4 h-4`}),`Save`]})}),(0,G.jsx)(`button`,{onClick:n,className:`p-1 hover:bg-bambu-dark-tertiary rounded transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5 text-bambu-gray`})})]})]}),(0,G.jsxs)(`div`,{className:`flex-1 overflow-y-auto p-4 space-y-4`,children:[(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`video`,{ref:a,src:t,className:`w-full rounded-lg bg-black`,onClick:M,muted:!!S}),!s&&(0,G.jsx)(`button`,{onClick:M,className:`absolute inset-0 flex items-center justify-center bg-black/30 hover:bg-black/40 transition-colors`,children:(0,G.jsx)(`div`,{className:`p-4 bg-bambu-green rounded-full`,children:(0,G.jsx)(Ml,{className:`w-8 h-8 text-white`})})}),S&&(0,G.jsx)(`audio`,{ref:o,src:S,loop:!0})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(Xl,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:`Trim`}),(0,G.jsxs)(`span`,{className:`ml-auto`,children:[cp(p),` - `,cp(h),` (`,cp(I),`)`]})]}),(0,G.jsxs)(`div`,{className:`relative h-16 bg-bambu-dark rounded-lg overflow-hidden`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 flex`,children:A?.thumbnails.map((e,t)=>(0,G.jsx)(`div`,{className:`flex-1 bg-cover bg-center`,style:{backgroundImage:`url(data:image/jpeg;base64,${e})`}},t))}),(0,G.jsx)(`div`,{className:`absolute inset-y-0 left-0 bg-black/60`,style:{width:`${p/d*100}%`}}),(0,G.jsx)(`div`,{className:`absolute inset-y-0 right-0 bg-black/60`,style:{width:`${(d-h)/d*100}%`}}),(0,G.jsx)(`div`,{className:`absolute inset-y-0 border-2 border-bambu-green`,style:{left:`${p/d*100}%`,right:`${(d-h)/d*100}%`}}),(0,G.jsx)(`div`,{className:`absolute top-0 bottom-0 w-0.5 bg-white shadow-lg`,style:{left:`${l/d*100}%`}}),(0,G.jsx)(`input`,{type:`range`,min:0,max:d,step:.1,value:p,onChange:e=>{let t=parseFloat(e.target.value);t<h-1&&(m(t),a.current&&a.current.currentTime<t&&(a.current.currentTime=t))},className:`absolute inset-0 w-full opacity-0 cursor-ew-resize`,style:{clipPath:`inset(0 50% 0 0)`}}),(0,G.jsx)(`input`,{type:`range`,min:0,max:d,step:.1,value:h,onChange:e=>{let t=parseFloat(e.target.value);t>p+1&&g(t)},className:`absolute inset-0 w-full opacity-0 cursor-ew-resize`,style:{clipPath:`inset(0 0 0 50%)`}})]}),(0,G.jsx)(`input`,{type:`range`,min:0,max:d,step:.1,value:l,onChange:e=>N(parseFloat(e.target.value)),className:`w-full h-1 bg-bambu-dark-tertiary rounded-lg appearance-none cursor-pointer
+`),[i,a]=fze(r);if(i.length===0)return;let o=c4(i,i[0].indent,n);if(o.length!==0)return{type:`list`,ordered:!0,start:i[0]?.number||1,typeMarker:i[0]?.type,items:o,raw:r.slice(0,a).join(`
+`)}}},markdownOptions:{indentsContent:!0},addCommands(){return{toggleOrderedList:()=>({commands:e,chain:t})=>this.options.keepAttributes?t().toggleList(this.name,this.options.itemTypeName,this.options.keepMarks).updateAttributes(gze,this.editor.getAttributes(l4)).run():e.toggleList(this.name,this.options.itemTypeName,this.options.keepMarks)}},addKeyboardShortcuts(){return{"Mod-Shift-7":()=>this.editor.commands.toggleOrderedList()}},addProseMirrorPlugins(){return[new mY({props:{handlePaste:(e,t)=>{if((t.clipboardData?.getData(`text/html`))?.trim())return!1;let n=t.clipboardData?.getData(`text/plain`);if(!n)return!1;let r=mze(n);if(!r)return!1;try{let t=e.state.schema.nodeFromJSON(r),n=e.state.tr.replaceSelectionWith(t);return e.dispatch(n),!0}catch{return!1}}}})]},addInputRules(){let e=(e,t)=>(!t.attrs.type||t.attrs.type===`1`)&&t.childCount+t.attrs.start===+e[1],t=v1({find:u4,type:this.type,getAttributes:e=>({start:+e[1]}),joinPredicate:e});return(this.options.keepMarks||this.options.keepAttributes)&&(t=v1({find:u4,type:this.type,keepMarks:this.options.keepMarks,keepAttributes:this.options.keepAttributes,getAttributes:e=>({start:+e[1],...this.editor.getAttributes(l4)}),joinPredicate:e,editor:this.editor})),[t]}}),_ze=/^\s*(\[([( |x])?\])\s$/,vze=`position:absolute;width:1px;height:1px;padding:0;margin:-1px;overflow:hidden;clip:rect(0,0,0,0);white-space:nowrap;border:0`,yze=(e,t,n)=>{var r;return(n==null||(r=n.checkboxLabel)==null?void 0:r.call(n,e,t))||`Task item checkbox for ${e.textContent||`empty task item`}`},bze=y1.create({name:`taskItem`,addOptions(){return{nested:!1,HTMLAttributes:{},taskListTypeName:`taskList`,a11y:void 0}},content(){return this.options.nested?`paragraph block*`:`paragraph+`},defining:!0,addAttributes(){return{checked:{default:!1,keepOnSplit:!1,parseHTML:e=>{let t=e.getAttribute(`data-checked`);return t===``||t===`true`},renderHTML:e=>({"data-checked":e.checked})}}},parseHTML(){return[{tag:`li[data-type="${this.name}"]`,priority:51,contentElement:e=>e.querySelector(`div`)??e}]},renderHTML({node:e,HTMLAttributes:t}){return[`li`,v$(this.options.HTMLAttributes,t,{"data-type":this.name}),[`label`,[`input`,{type:`checkbox`,checked:e.attrs.checked?`checked`:null}],[`span`]],[`div`,0]]},parseMarkdown:(e,t)=>{let n=[];if(e.tokens&&e.tokens.length>0?n.push(t.createNode(`paragraph`,{},t.parseInline(e.tokens))):e.text?n.push(t.createNode(`paragraph`,{},[t.createNode(`text`,{text:e.text})])):n.push(t.createNode(`paragraph`,{},[])),e.nestedTokens&&e.nestedTokens.length>0){let r=t.parseChildren(e.nestedTokens);n.push(...r)}return t.createNode(`taskItem`,{checked:e.checked||!1},n)},renderMarkdown:(e,t)=>i1(e,t,`- [${e.attrs?.checked?`x`:` `}] `),addExtensions(){return this.options.nested?[W2(this.name,[this.options.taskListTypeName])]:[]},addKeyboardShortcuts(){let e={Enter:()=>this.editor.commands.splitListItem(this.name),"Shift-Tab":()=>this.editor.commands.liftListItem(this.name)};return this.options.nested?{...e,Tab:()=>this.editor.commands.sinkListItem(this.name)}:e},addNodeView(){return({node:e,HTMLAttributes:t,getPos:n,editor:r})=>{let i=document.createElement(`li`),a=document.createElement(`label`),o=document.createElement(`span`),s=document.createElement(`input`),c=document.createElement(`div`);o.style.cssText=vze;let l=e=>{let t=yze(e,e.attrs.checked,this.options.a11y);s.setAttribute(`aria-label`,t),o.textContent=t};l(e),a.contentEditable=`false`,s.type=`checkbox`,s.addEventListener(`mousedown`,e=>e.preventDefault()),s.addEventListener(`change`,t=>{if(!r.isEditable&&!this.options.onReadOnlyChecked){s.checked=!s.checked;return}let{checked:i}=t.target;r.isEditable&&typeof n==`function`&&r.chain().focus(void 0,{scrollIntoView:!1}).command(({tr:e})=>{let t=n();if(typeof t!=`number`)return!1;let r=e.doc.nodeAt(t);return e.setNodeMarkup(t,void 0,{...r?.attrs,checked:i}),!0}).run(),!r.isEditable&&this.options.onReadOnlyChecked&&(this.options.onReadOnlyChecked(e,i)||(s.checked=!s.checked))}),Object.entries(this.options.HTMLAttributes).forEach(([e,t])=>{i.setAttribute(e,t)}),i.dataset.checked=e.attrs.checked,s.checked=e.attrs.checked,a.append(s,o),i.append(a,c),Object.entries(t).forEach(([e,t])=>{i.setAttribute(e,t)});let u=new Set(Object.keys(t));return{dom:i,contentDOM:c,update:e=>{if(e.type!==this.type)return!1;i.dataset.checked=e.attrs.checked,s.checked=e.attrs.checked,l(e);let t=r.extensionManager.attributes,n=y$(e,t),a=new Set(Object.keys(n)),o=this.options.HTMLAttributes;return u.forEach(e=>{a.has(e)||(e in o?i.setAttribute(e,o[e]):i.removeAttribute(e))}),Object.entries(n).forEach(([e,t])=>{t==null?e in o?i.setAttribute(e,o[e]):i.removeAttribute(e):i.setAttribute(e,t)}),u=a,!0}}}},addInputRules(){return[v1({find:_ze,type:this.type,getAttributes:e=>({checked:e[e.length-1]===`x`})})]}}),xze=y1.create({name:`taskList`,addOptions(){return{itemTypeName:`taskItem`,HTMLAttributes:{}}},group:`block list`,content(){return`${this.options.itemTypeName}+`},parseHTML(){return[{tag:`ul[data-type="${this.name}"]`,priority:51}]},renderHTML({HTMLAttributes:e}){return[`ul`,v$(this.options.HTMLAttributes,e,{"data-type":this.name}),0]},parseMarkdown:(e,t)=>t.createNode(`taskList`,{},t.parseChildren(e.items||[])),renderMarkdown:(e,t)=>e.content?t.renderChildren(e.content,`
+`):``,markdownTokenizer:{name:`taskList`,level:`block`,start(e){let t=e.match(/^\s*[-+*]\s+\[([ xX])\]\s+/)?.index;return t===void 0?-1:t},tokenize(e,t,n){let r=e=>{let t=t1(e,{itemPattern:/^(\s*)([-+*])\s+\[([ xX])\]\s+(.*)$/,extractItemData:e=>({indentLevel:e[1].length,mainContent:e[4],checked:e[3].toLowerCase()===`x`}),createToken:(e,t)=>({type:`taskItem`,raw:``,mainContent:e.mainContent,indentLevel:e.indentLevel,checked:e.checked,text:e.mainContent,tokens:n.inlineTokens(e.mainContent),nestedTokens:t}),customNestedParser:r},n);if(t){let r={type:`taskList`,raw:t.raw,items:t.items},i=e.slice(t.raw.length);return i.trim()?[r,...n.blockTokens(i)]:[r]}return n.blockTokens(e)},i=t1(e,{itemPattern:/^(\s*)([-+*])\s+\[([ xX])\]\s+(.*)$/,extractItemData:e=>({indentLevel:e[1].length,mainContent:e[4],checked:e[3].toLowerCase()===`x`}),createToken:(e,t)=>({type:`taskItem`,raw:``,mainContent:e.mainContent,indentLevel:e.indentLevel,checked:e.checked,text:e.mainContent,tokens:n.inlineTokens(e.mainContent),nestedTokens:t}),customNestedParser:r},n);if(i)return{type:`taskList`,raw:i.raw,items:i.items}}},markdownOptions:{indentsContent:!0},addCommands(){return{toggleTaskList:()=>({commands:e})=>e.toggleList(this.name,this.options.itemTypeName)}},addKeyboardShortcuts(){return{"Mod-Shift-9":()=>this.editor.commands.toggleTaskList()}}});p1.create({name:`listKit`,addExtensions(){let e=[];return this.options.bulletList!==!1&&e.push(U2.configure(this.options.bulletList)),this.options.listItem!==!1&&e.push(e4.configure(this.options.listItem)),this.options.listKeymap!==!1&&e.push(a4.configure(this.options.listKeymap)),this.options.orderedList!==!1&&e.push(f4.configure(this.options.orderedList)),this.options.taskItem!==!1&&e.push(bze.configure(this.options.taskItem)),this.options.taskList!==!1&&e.push(xze.configure(this.options.taskList)),e}});var p4=`&nbsp;`,m4=`\xA0`,Sze=y1.create({name:`paragraph`,priority:1e3,addOptions(){return{HTMLAttributes:{}}},group:`block`,content:`inline*`,parseHTML(){return[{tag:`p`}]},renderHTML({HTMLAttributes:e}){return[`p`,v$(this.options.HTMLAttributes,e),0]},parseMarkdown:(e,t)=>{let n=e.tokens||[];if(n.length===1&&n[0].type===`image`)return t.parseChildren([n[0]]);let r=t.parseInline(n);return n.length===1&&n[0].type===`text`&&(n[0].raw===p4||n[0].text===p4||n[0].raw===m4||n[0].text===m4)&&r.length===1&&r[0].type===`text`&&(r[0].text===p4||r[0].text===m4)?t.createNode(`paragraph`,void 0,[]):t.createNode(`paragraph`,void 0,r)},renderMarkdown:(e,t,n)=>{if(!e)return``;let r=Array.isArray(e.content)?e.content:[];if(r.length===0){var i,a;let e=Array.isArray(n==null||(i=n.previousNode)==null?void 0:i.content)?n.previousNode.content:[];return(n==null||(a=n.previousNode)==null?void 0:a.type)===`paragraph`&&e.length===0?p4:``}return t.renderChildren(r)},addCommands(){return{setParagraph:()=>({commands:e})=>e.setNode(this.name)}},addKeyboardShortcuts(){return{"Mod-Alt-0":()=>this.editor.commands.setParagraph()}}}),Cze=/(?:^|\s)(~~(?!\s+~~)((?:[^~]+))~~(?!\s+~~))$/,wze=/(?:^|\s)(~~(?!\s+~~)((?:[^~]+))~~(?!\s+~~))/g,Tze=l1.create({name:`strike`,addOptions(){return{HTMLAttributes:{}}},parseHTML(){return[{tag:`s`},{tag:`del`},{tag:`strike`},{style:`text-decoration`,consuming:!1,getAttrs:e=>e.includes(`line-through`)?{}:!1}]},renderHTML({HTMLAttributes:e}){return[`s`,v$(this.options.HTMLAttributes,e),0]},markdownTokenName:`del`,parseMarkdown:(e,t)=>t.applyMark(`strike`,t.parseInline(e.tokens||[])),renderMarkdown:(e,t)=>`~~${t.renderChildren(e)}~~`,addCommands(){return{setStrike:()=>({commands:e})=>e.setMark(this.name),toggleStrike:()=>({commands:e})=>e.toggleMark(this.name),unsetStrike:()=>({commands:e})=>e.unsetMark(this.name)}},addKeyboardShortcuts(){return{"Mod-Shift-s":()=>this.editor.commands.toggleStrike()}},addInputRules(){return[h1({find:Cze,type:this.type})]},addPasteRules(){return[b1({find:wze,type:this.type})]}}),Eze=y1.create({name:`text`,group:`inline`,parseMarkdown:e=>({type:`text`,text:e.text||``}),renderMarkdown:e=>e.text||``}),h4=l1.create({name:`underline`,addOptions(){return{HTMLAttributes:{}}},parseHTML(){return[{tag:`u`},{style:`text-decoration`,consuming:!1,getAttrs:e=>e.includes(`underline`)?{}:!1}]},renderHTML({HTMLAttributes:e}){return[`u`,v$(this.options.HTMLAttributes,e),0]},parseMarkdown(e,t){return t.applyMark(this.name||`underline`,t.parseInline(e.tokens||[]))},renderMarkdown(e,t){return`++${t.renderChildren(e)}++`},markdownTokenizer:{name:`underline`,level:`inline`,start(e){return e.indexOf(`++`)},tokenize(e,t,n){let r=/^(\+\+)([\s\S]+?)(\+\+)/.exec(e);if(!r)return;let i=r[2].trim();return{type:`underline`,raw:r[0],text:i,tokens:n.inlineTokens(i)}}},addCommands(){return{setUnderline:()=>({commands:e})=>e.setMark(this.name),toggleUnderline:()=>({commands:e})=>e.toggleMark(this.name),unsetUnderline:()=>({commands:e})=>e.unsetMark(this.name)}},addKeyboardShortcuts(){return{"Mod-u":()=>this.editor.commands.toggleUnderline(),"Mod-U":()=>this.editor.commands.toggleUnderline()}}}),Dze=h4;function Oze(e={}){return new mY({view(t){return new kze(t,e)}})}var kze=class{constructor(e,t){this.editorView=e,this.cursorPos=null,this.element=null,this.timeout=-1,this.width=t.width??1,this.color=t.color===!1?void 0:t.color||`black`,this.class=t.class,this.handlers=[`dragover`,`dragend`,`drop`,`dragleave`].map(t=>{let n=e=>{this[t](e)};return e.dom.addEventListener(t,n),{name:t,handler:n}})}destroy(){this.handlers.forEach(({name:e,handler:t})=>this.editorView.dom.removeEventListener(e,t))}update(e,t){this.cursorPos!=null&&t.doc!=e.state.doc&&(this.cursorPos>e.state.doc.content.size?this.setCursor(null):this.updateOverlay())}setCursor(e){e!=this.cursorPos&&(this.cursorPos=e,e==null?(this.element.parentNode.removeChild(this.element),this.element=null):this.updateOverlay())}updateOverlay(){let e=this.editorView.state.doc.resolve(this.cursorPos),t=!e.parent.inlineContent,n,r=this.editorView.dom,i=r.getBoundingClientRect(),a=i.width/r.offsetWidth,o=i.height/r.offsetHeight;if(t){let t=e.nodeBefore,r=e.nodeAfter;if(t||r){let e=this.editorView.nodeDOM(this.cursorPos-(t?t.nodeSize:0));if(e){let i=e.getBoundingClientRect(),a=t?i.bottom:i.top;t&&r&&(a=(a+this.editorView.nodeDOM(this.cursorPos).getBoundingClientRect().top)/2);let s=this.width/2*o;n={left:i.left,right:i.right,top:a-s,bottom:a+s}}}}if(!n){let e=this.editorView.coordsAtPos(this.cursorPos),t=this.width/2*a;n={left:e.left-t,right:e.left+t,top:e.top,bottom:e.bottom}}let s=this.editorView.dom.offsetParent;this.element||(this.element=s.appendChild(document.createElement(`div`)),this.class&&(this.element.className=this.class),this.element.style.cssText=`position: absolute; z-index: 50; pointer-events: none;`,this.color&&(this.element.style.backgroundColor=this.color)),this.element.classList.toggle(`prosemirror-dropcursor-block`,t),this.element.classList.toggle(`prosemirror-dropcursor-inline`,!t);let c,l;if(!s||s==document.body&&getComputedStyle(s).position==`static`)c=-pageXOffset,l=-pageYOffset;else{let e=s.getBoundingClientRect(),t=e.width/s.offsetWidth,n=e.height/s.offsetHeight;c=e.left-s.scrollLeft*t,l=e.top-s.scrollTop*n}this.element.style.left=(n.left-c)/a+`px`,this.element.style.top=(n.top-l)/o+`px`,this.element.style.width=(n.right-n.left)/a+`px`,this.element.style.height=(n.bottom-n.top)/o+`px`}scheduleRemoval(e){clearTimeout(this.timeout),this.timeout=setTimeout(()=>this.setCursor(null),e)}dragover(e){if(!this.editorView.editable)return;let t=this.editorView.posAtCoords({left:e.clientX,top:e.clientY}),n=t&&t.inside>=0&&this.editorView.state.doc.nodeAt(t.inside),r=n&&n.type.spec.disableDropCursor,i=typeof r==`function`?r(this.editorView,t,e):r;if(t&&!i){let e=t.pos;if(this.editorView.dragging&&this.editorView.dragging.slice){let t=FJ(this.editorView.state.doc,e,this.editorView.dragging.slice);t!=null&&(e=t)}this.setCursor(e),this.scheduleRemoval(5e3)}}dragend(){this.scheduleRemoval(20)}drop(){this.scheduleRemoval(20)}dragleave(e){this.editorView.dom.contains(e.relatedTarget)||this.setCursor(null)}},g4=class e extends ZJ{constructor(e){super(e,e)}map(t,n){let r=t.resolve(n.map(this.head));return e.valid(r)?new e(r):ZJ.near(r)}content(){return hq.empty}eq(t){return t instanceof e&&t.head==this.head}toJSON(){return{type:`gapcursor`,pos:this.head}}static fromJSON(t,n){if(typeof n.pos!=`number`)throw RangeError(`Invalid input for GapCursor.fromJSON`);return new e(t.resolve(n.pos))}getBookmark(){return new Aze(this.anchor)}static valid(e){let t=e.parent;if(t.inlineContent||!jze(e)||!Mze(e))return!1;let n=t.type.spec.allowGapCursor;if(n!=null)return n;let r=t.contentMatchAt(e.index()).defaultType;return r&&r.isTextblock}static findGapCursorFrom(t,n,r=!1){search:for(;;){if(!r&&e.valid(t))return t;let i=t.pos,a=null;for(let r=t.depth;;r--){let o=t.node(r);if(n>0?t.indexAfter(r)<o.childCount:t.index(r)>0){a=o.child(n>0?t.indexAfter(r):t.index(r)-1);break}else if(r==0)return null;i+=n;let s=t.doc.resolve(i);if(e.valid(s))return s}for(;;){let o=n>0?a.firstChild:a.lastChild;if(!o){if(a.isAtom&&!a.isText&&!nY.isSelectable(a)){t=t.doc.resolve(i+a.nodeSize*n),r=!1;continue search}break}a=o,i+=n;let s=t.doc.resolve(i);if(e.valid(s))return s}return null}}};g4.prototype.visible=!1,g4.findFrom=g4.findGapCursorFrom,ZJ.jsonID(`gapcursor`,g4);var Aze=class e{constructor(e){this.pos=e}map(t){return new e(t.map(this.pos))}resolve(e){let t=e.resolve(this.pos);return g4.valid(t)?new g4(t):ZJ.near(t)}};function _4(e){return e.isAtom||e.spec.isolating||e.spec.createGapCursor}function jze(e){for(let t=e.depth;t>=0;t--){let n=e.index(t),r=e.node(t);if(n==0){if(r.type.spec.isolating)return!0;continue}for(let e=r.child(n-1);;e=e.lastChild){if(e.childCount==0&&!e.inlineContent||_4(e.type))return!0;if(e.inlineContent)return!1}}return!0}function Mze(e){for(let t=e.depth;t>=0;t--){let n=e.indexAfter(t),r=e.node(t);if(n==r.childCount){if(r.type.spec.isolating)return!0;continue}for(let e=r.child(n);;e=e.firstChild){if(e.childCount==0&&!e.inlineContent||_4(e.type))return!0;if(e.inlineContent)return!1}}return!0}function Nze(){return new mY({props:{decorations:Lze,createSelectionBetween(e,t,n){return t.pos==n.pos&&g4.valid(n)?new g4(n):null},handleClick:Fze,handleKeyDown:Pze,handleDOMEvents:{beforeinput:Ize}}})}var Pze=NQ({ArrowLeft:v4(`horiz`,-1),ArrowRight:v4(`horiz`,1),ArrowUp:v4(`vert`,-1),ArrowDown:v4(`vert`,1)});function v4(e,t){let n=e==`vert`?t>0?`down`:`up`:t>0?`right`:`left`;return function(e,r,i){let a=e.selection,o=t>0?a.$to:a.$from,s=a.empty;if(a instanceof eY){if(!i.endOfTextblock(n)||o.depth==0)return!1;s=!1,o=e.doc.resolve(t>0?o.after():o.before())}let c=g4.findGapCursorFrom(o,t,s);return c?(r&&r(e.tr.setSelection(new g4(c))),!0):!1}}function Fze(e,t,n){if(!e||!e.editable)return!1;let r=e.state.doc.resolve(t);if(!g4.valid(r))return!1;let i=e.posAtCoords({left:n.clientX,top:n.clientY});return i&&i.inside>-1&&nY.isSelectable(e.state.doc.nodeAt(i.inside))?!1:(e.dispatch(e.state.tr.setSelection(new g4(r))),!0)}function Ize(e,t){if(t.inputType!=`insertCompositionText`||!(e.state.selection instanceof g4))return!1;let{$from:n}=e.state.selection,r=n.parent.contentMatchAt(n.index()).findWrapping(e.state.schema.nodes.text);if(!r)return!1;let i=lq.empty;for(let e=r.length-1;e>=0;e--)i=lq.from(r[e].createAndFill(null,i));let a=e.state.tr.replace(n.pos,n.pos,new hq(i,0,0));return a.setSelection(eY.near(a.doc.resolve(n.pos+1))),e.dispatch(a),!1}function Lze(e){if(!(e.selection instanceof g4))return null;let t=document.createElement(`div`);return t.className=`ProseMirror-gapcursor`,oQ.create(e.doc,[rQ.widget(e.selection.head,t,{key:`gapcursor`})])}var y4=200,b4=function(){};b4.prototype.append=function(e){return e.length?(e=b4.from(e),!this.length&&e||e.length<y4&&this.leafAppend(e)||this.length<y4&&e.leafPrepend(this)||this.appendInner(e)):this},b4.prototype.prepend=function(e){return e.length?b4.from(e).append(this):this},b4.prototype.appendInner=function(e){return new Rze(this,e)},b4.prototype.slice=function(e,t){return e===void 0&&(e=0),t===void 0&&(t=this.length),e>=t?b4.empty:this.sliceInner(Math.max(0,e),Math.min(this.length,t))},b4.prototype.get=function(e){if(!(e<0||e>=this.length))return this.getInner(e)},b4.prototype.forEach=function(e,t,n){t===void 0&&(t=0),n===void 0&&(n=this.length),t<=n?this.forEachInner(e,t,n,0):this.forEachInvertedInner(e,t,n,0)},b4.prototype.map=function(e,t,n){t===void 0&&(t=0),n===void 0&&(n=this.length);var r=[];return this.forEach(function(t,n){return r.push(e(t,n))},t,n),r},b4.from=function(e){return e instanceof b4?e:e&&e.length?new x4(e):b4.empty};var x4=function(e){function t(t){e.call(this),this.values=t}e&&(t.__proto__=e),t.prototype=Object.create(e&&e.prototype),t.prototype.constructor=t;var n={length:{configurable:!0},depth:{configurable:!0}};return t.prototype.flatten=function(){return this.values},t.prototype.sliceInner=function(e,n){return e==0&&n==this.length?this:new t(this.values.slice(e,n))},t.prototype.getInner=function(e){return this.values[e]},t.prototype.forEachInner=function(e,t,n,r){for(var i=t;i<n;i++)if(e(this.values[i],r+i)===!1)return!1},t.prototype.forEachInvertedInner=function(e,t,n,r){for(var i=t-1;i>=n;i--)if(e(this.values[i],r+i)===!1)return!1},t.prototype.leafAppend=function(e){if(this.length+e.length<=y4)return new t(this.values.concat(e.flatten()))},t.prototype.leafPrepend=function(e){if(this.length+e.length<=y4)return new t(e.flatten().concat(this.values))},n.length.get=function(){return this.values.length},n.depth.get=function(){return 0},Object.defineProperties(t.prototype,n),t}(b4);b4.empty=new x4([]);var Rze=function(e){function t(t,n){e.call(this),this.left=t,this.right=n,this.length=t.length+n.length,this.depth=Math.max(t.depth,n.depth)+1}return e&&(t.__proto__=e),t.prototype=Object.create(e&&e.prototype),t.prototype.constructor=t,t.prototype.flatten=function(){return this.left.flatten().concat(this.right.flatten())},t.prototype.getInner=function(e){return e<this.left.length?this.left.get(e):this.right.get(e-this.left.length)},t.prototype.forEachInner=function(e,t,n,r){var i=this.left.length;if(t<i&&this.left.forEachInner(e,t,Math.min(n,i),r)===!1||n>i&&this.right.forEachInner(e,Math.max(t-i,0),Math.min(this.length,n)-i,r+i)===!1)return!1},t.prototype.forEachInvertedInner=function(e,t,n,r){var i=this.left.length;if(t>i&&this.right.forEachInvertedInner(e,t-i,Math.max(n,i)-i,r+i)===!1||n<i&&this.left.forEachInvertedInner(e,Math.min(t,i),n,r)===!1)return!1},t.prototype.sliceInner=function(e,t){if(e==0&&t==this.length)return this;var n=this.left.length;return t<=n?this.left.slice(e,t):e>=n?this.right.slice(e-n,t-n):this.left.slice(e,n).append(this.right.slice(0,t-n))},t.prototype.leafAppend=function(e){var n=this.right.leafAppend(e);if(n)return new t(this.left,n)},t.prototype.leafPrepend=function(e){var n=this.left.leafPrepend(e);if(n)return new t(n,this.right)},t.prototype.appendInner=function(e){return this.left.depth>=Math.max(this.right.depth,e.depth)+1?new t(this.left,new t(this.right,e)):new t(this,e)},t}(b4),zze=500,S4=class e{constructor(e,t){this.items=e,this.eventCount=t}popEvent(t,n){if(this.eventCount==0)return null;let r=this.items.length;for(;;r--)if(this.items.get(r-1).selection){--r;break}let i,a;n&&(i=this.remapping(r,this.items.length),a=i.maps.length);let o=t.tr,s,c,l=[],u=[];return this.items.forEach((t,n)=>{if(!t.step){i||(i=this.remapping(r,n+1),a=i.maps.length),a--,u.push(t);return}if(i){u.push(new C4(t.map));let e=t.step.map(i.slice(a)),n;e&&o.maybeStep(e).doc&&(n=o.mapping.maps[o.mapping.maps.length-1],l.push(new C4(n,void 0,void 0,l.length+u.length))),a--,n&&i.appendMap(n,a)}else o.maybeStep(t.step);if(t.selection)return s=i?t.selection.map(i.slice(a)):t.selection,c=new e(this.items.slice(0,r).append(u.reverse().concat(l)),this.eventCount-1),!1},this.items.length,0),{remaining:c,transform:o,selection:s}}addTransform(t,n,r,i){let a=[],o=this.eventCount,s=this.items,c=!i&&s.length?s.get(s.length-1):null;for(let e=0;e<t.steps.length;e++){let r=t.steps[e].invert(t.docs[e]),l=new C4(t.mapping.maps[e],r,n),u;(u=c&&c.merge(l))&&(l=u,e?a.pop():s=s.slice(0,s.length-1)),a.push(l),n&&=(o++,void 0),i||(c=l)}let l=o-r.depth;return l>Vze&&(s=Bze(s,l),o-=l),new e(s.append(a),o)}remapping(e,t){let n=new pJ;return this.items.forEach((t,r)=>{let i=t.mirrorOffset!=null&&r-t.mirrorOffset>=e?n.maps.length-t.mirrorOffset:void 0;n.appendMap(t.map,i)},e,t),n}addMaps(t){return this.eventCount==0?this:new e(this.items.append(t.map(e=>new C4(e))),this.eventCount)}rebased(t,n){if(!this.eventCount)return this;let r=[],i=Math.max(0,this.items.length-n),a=t.mapping,o=t.steps.length,s=this.eventCount;this.items.forEach(e=>{e.selection&&s--},i);let c=n;this.items.forEach(e=>{let n=a.getMirror(--c);if(n==null)return;o=Math.min(o,n);let i=a.maps[n];if(e.step){let o=t.steps[n].invert(t.docs[n]),l=e.selection&&e.selection.map(a.slice(c+1,n));l&&s++,r.push(new C4(i,o,l))}else r.push(new C4(i))},i);let l=[];for(let e=n;e<o;e++)l.push(new C4(a.maps[e]));let u=new e(this.items.slice(0,i).append(l).append(r),s);return u.emptyItemCount()>zze&&(u=u.compress(this.items.length-r.length)),u}emptyItemCount(){let e=0;return this.items.forEach(t=>{t.step||e++}),e}compress(t=this.items.length){let n=this.remapping(0,t),r=n.maps.length,i=[],a=0;return this.items.forEach((e,o)=>{if(o>=t)i.push(e),e.selection&&a++;else if(e.step){let t=e.step.map(n.slice(r)),o=t&&t.getMap();if(r--,o&&n.appendMap(o,r),t){let s=e.selection&&e.selection.map(n.slice(r));s&&a++;let c=new C4(o.invert(),t,s),l,u=i.length-1;(l=i.length&&i[u].merge(c))?i[u]=l:i.push(c)}}else e.map&&r--},this.items.length,0),new e(b4.from(i.reverse()),a)}};S4.empty=new S4(b4.empty,0);function Bze(e,t){let n;return e.forEach((e,r)=>{if(e.selection&&t--==0)return n=r,!1}),e.slice(n)}var C4=class e{constructor(e,t,n,r){this.map=e,this.step=t,this.selection=n,this.mirrorOffset=r}merge(t){if(this.step&&t.step&&!t.selection){let n=t.step.merge(this.step);if(n)return new e(n.getMap().invert(),n,this.selection)}}},w4=class{constructor(e,t,n,r,i){this.done=e,this.undone=t,this.prevRanges=n,this.prevTime=r,this.prevComposition=i}},Vze=20;function Hze(e,t,n,r){let i=n.getMeta(A4),a;if(i)return i.historyState;n.getMeta(Gze)&&(e=new w4(e.done,e.undone,null,0,-1));let o=n.getMeta(`appendedTransaction`);if(n.steps.length==0)return e;if(o&&o.getMeta(A4))return o.getMeta(A4).redo?new w4(e.done.addTransform(n,void 0,r,k4(t)),e.undone,T4(n.mapping.maps),e.prevTime,e.prevComposition):new w4(e.done,e.undone.addTransform(n,void 0,r,k4(t)),null,e.prevTime,e.prevComposition);if(n.getMeta(`addToHistory`)!==!1&&!(o&&o.getMeta(`addToHistory`)===!1)){let i=n.getMeta(`composition`),a=e.prevTime==0||!o&&e.prevComposition!=i&&(e.prevTime<(n.time||0)-r.newGroupDelay||!Uze(n,e.prevRanges)),s=o?E4(e.prevRanges,n.mapping):T4(n.mapping.maps);return new w4(e.done.addTransform(n,a?t.selection.getBookmark():void 0,r,k4(t)),S4.empty,s,n.time,i??e.prevComposition)}else if(a=n.getMeta(`rebased`))return new w4(e.done.rebased(n,a),e.undone.rebased(n,a),E4(e.prevRanges,n.mapping),e.prevTime,e.prevComposition);else return new w4(e.done.addMaps(n.mapping.maps),e.undone.addMaps(n.mapping.maps),E4(e.prevRanges,n.mapping),e.prevTime,e.prevComposition)}function Uze(e,t){if(!t)return!1;if(!e.docChanged)return!0;let n=!1;return e.mapping.maps[0].forEach((e,r)=>{for(let i=0;i<t.length;i+=2)e<=t[i+1]&&r>=t[i]&&(n=!0)}),n}function T4(e){let t=[];for(let n=e.length-1;n>=0&&t.length==0;n--)e[n].forEach((e,n,r,i)=>t.push(r,i));return t}function E4(e,t){if(!e)return null;let n=[];for(let r=0;r<e.length;r+=2){let i=t.map(e[r],1),a=t.map(e[r+1],-1);i<=a&&n.push(i,a)}return n}function Wze(e,t,n){let r=k4(t),i=A4.get(t).spec.config,a=(n?e.undone:e.done).popEvent(t,r);if(!a)return null;let o=a.selection.resolve(a.transform.doc),s=(n?e.done:e.undone).addTransform(a.transform,t.selection.getBookmark(),i,r),c=new w4(n?s:a.remaining,n?a.remaining:s,null,0,-1);return a.transform.setSelection(o).setMeta(A4,{redo:n,historyState:c})}var D4=!1,O4=null;function k4(e){let t=e.plugins;if(O4!=t){D4=!1,O4=t;for(let e=0;e<t.length;e++)if(t[e].spec.historyPreserveItems){D4=!0;break}}return D4}var A4=new _Y(`history`),Gze=new _Y(`closeHistory`);function Kze(e={}){return e={depth:e.depth||100,newGroupDelay:e.newGroupDelay||500},new mY({key:A4,state:{init(){return new w4(S4.empty,S4.empty,null,0,-1)},apply(t,n,r){return Hze(n,r,t,e)}},config:e,props:{handleDOMEvents:{beforeinput(e,t){let n=t.inputType,r=n==`historyUndo`?M4:n==`historyRedo`?N4:null;return!r||!e.editable?!1:(t.preventDefault(),r(e.state,e.dispatch))}}}})}function j4(e,t){return(n,r)=>{let i=A4.getState(n);if(!i||(e?i.undone:i.done).eventCount==0)return!1;if(r){let a=Wze(i,n,e);a&&r(t?a.scrollIntoView():a)}return!0}}var M4=j4(!1,!0),N4=j4(!0,!0);p1.create({name:`characterCount`,addOptions(){return{limit:null,autoTrim:!0,mode:`textSize`,textCounter:e=>e.length,wordCounter:e=>e.split(` `).filter(e=>e!==``).length}},addStorage(){return{characters:()=>0,words:()=>0}},onBeforeCreate(){this.storage.characters=e=>{let t=e?.node||this.editor.state.doc;if((e?.mode||this.options.mode)===`textSize`){let e=t.textBetween(0,t.content.size,void 0,` `);return this.options.textCounter(e)}return t.nodeSize},this.storage.words=e=>{let t=e?.node||this.editor.state.doc,n=t.textBetween(0,t.content.size,` `,` `);return this.options.wordCounter(n)}},addProseMirrorPlugins(){let e=!1;return[new mY({key:new _Y(`characterCount`),appendTransaction:(t,n,r)=>{if(e)return;let i=this.options.limit,a=this.options.autoTrim;if(i==null||i===0||a===!1){e=!0;return}let o=this.storage.characters({node:r.doc});if(o>i){let t=o-i;console.warn(`[CharacterCount] Initial content exceeded limit of ${i} characters. Content was automatically trimmed.`);let n=r.tr.deleteRange(0,t);return e=!0,n}e=!0},filterTransaction:(e,t)=>{let n=this.options.limit;if(!e.docChanged||n===0||n==null)return!0;let r=this.storage.characters({node:t.doc}),i=this.storage.characters({node:e.doc});if(i<=n||r>n&&i>n&&i<=r)return!0;if(r>n&&i>n&&i>r||!e.getMeta(`paste`))return!1;let a=e.selection.$head.pos,o=a-(i-n),s=a;return e.deleteRange(o,s),!(this.storage.characters({node:e.doc})>n)}})]}});var qze=p1.create({name:`dropCursor`,addOptions(){return{color:`currentColor`,width:1,class:void 0}},addProseMirrorPlugins(){return[Oze(this.options)]}});p1.create({name:`focus`,addOptions(){return{className:`has-focus`,mode:`all`}},addProseMirrorPlugins(){return[new mY({key:new _Y(`focus`),props:{decorations:({doc:e,selection:t})=>{let{isEditable:n,isFocused:r}=this.editor,{anchor:i}=t,a=[];if(!n||!r)return oQ.create(e,[]);let o=0;this.options.mode===`deepest`&&e.descendants((e,t)=>{if(!e.isText){if(!(i>=t&&i<=t+e.nodeSize-1))return!1;o+=1}});let s=0;return e.descendants((e,t)=>{if(e.isText||!(i>=t&&i<=t+e.nodeSize-1))return!1;if(s+=1,this.options.mode===`deepest`&&o-s>0||this.options.mode===`shallowest`&&s>1)return this.options.mode===`deepest`;a.push(rQ.node(t,t+e.nodeSize,{class:this.options.className}))}),oQ.create(e,a)}}})]}});var Jze=p1.create({name:`gapCursor`,addProseMirrorPlugins(){return[Nze()]},extendNodeSchema(e){return{allowGapCursor:m$(u$(e,`allowGapCursor`,{name:e.name,options:e.options,storage:e.storage}))??null}}}),P4=`placeholder`,F4=new _Y(`tiptap__placeholder`);function I4(e){let{editor:t,placeholder:n,dataAttribute:r,pos:i,node:a,isEmptyDoc:o,hasAnchor:s,classes:{emptyNode:c,emptyEditor:l}}=e,u=[c];return o&&u.push(l),rQ.node(i,i+a.nodeSize,{class:u.join(` `),[r]:typeof n==`function`?n({editor:t,node:a,pos:i,hasAnchor:s}):n})}function L4(e,t){return typeof e==`function`?e(t):e}function R4({editor:e,options:t,dataAttribute:n,doc:r,selection:i,from:a,to:o}){let{anchor:s}=i,c=[],l=e.isEmpty;return r.nodesBetween(a,o,(r,i)=>{let a=s>=i&&s<=i+r.nodeSize,o=!r.isLeaf&&F$(r);return r.type.isTextblock&&(a||!t.showOnlyCurrent)&&o&&c.push(I4({editor:e,isEmptyDoc:l,dataAttribute:n,hasAnchor:a,placeholder:t.placeholder,classes:{emptyEditor:t.emptyEditorClass,emptyNode:L4(t.emptyNodeClass,{editor:e,node:r,pos:i,hasAnchor:a})},node:r,pos:i})),t.includeChildren}),c}function z4({editor:e,options:t,dataAttribute:n,doc:r,selection:i}){if(!(e.isEditable||!t.showOnlyWhenEditable))return null;let{anchor:a}=i,o=[],s=e.isEmpty;if(t.showOnlyCurrent&&!t.includeChildren){let i=r.resolve(a),c=i.depth>0?i.node(1):i.nodeAfter,l=i.depth>0?i.before(1):a;if(c&&c.type.isTextblock&&F$(c)){let r=a>=l&&a<=l+c.nodeSize;o.push(I4({editor:e,isEmptyDoc:s,dataAttribute:n,hasAnchor:r,placeholder:t.placeholder,classes:{emptyEditor:t.emptyEditorClass,emptyNode:L4(t.emptyNodeClass,{editor:e,node:c,pos:l,hasAnchor:r})},node:c,pos:l}))}}else o.push(...R4({editor:e,options:t,dataAttribute:n,doc:r,selection:i,from:0,to:r.content.size}));return oQ.create(r,o)}function B4(e,t){let n=e.resolve(t);if(n.depth===0){let e=n.nodeAfter??n.nodeBefore;if(!e)return{from:t,to:t};let r=n.nodeAfter?t:t-e.nodeSize;return{from:r,to:r+e.nodeSize}}let r=n.before(1);return{from:r,to:r+n.node(1).nodeSize}}function V4(e,t){return{from:Math.max(0,t.from-1),to:Math.min(e.content.size,t.to-1)}}function Yze(e,t,n){let r=[];return e.forEach((e,i)=>{let a=i,o=a+e.nodeSize,s=a+1,c=o+1;s<n&&c>t&&r.push({from:a,to:o})}),r}function Xze(e){if(e.length===0)return[];let t=[...e].sort((e,t)=>e.from-t.from),n=[{...t[0]}];for(let e=1;e<t.length;e+=1){let r=n[n.length-1],i=t[e];i.from<=r.to?r.to=Math.max(r.to,i.to):n.push({...i})}return n}function Zze(e,t){let n=Yze(e,t.from,t.to);return n.push(V4(e,B4(e,t.from))),t.to>t.from?n.push(V4(e,B4(e,Math.min(t.to,e.content.size+1)-1))):t.from<e.content.size+1&&n.push(V4(e,B4(e,Math.min(t.from+1,e.content.size)))),n}function Qze(e,t,n){let r=[];if(e.docChanged){let t=O$(e);for(let e of t)r.push(...Zze(n.doc,e.newRange))}return e.selectionSet&&(r.push(V4(n.doc,B4(n.doc,e.mapping.map(t.selection.anchor)))),r.push(V4(n.doc,B4(n.doc,n.selection.anchor)))),Xze(r)}function $ze(e,t,n){let r=Math.max(0,Math.min(e,n.content.size));return{from:r,to:Math.max(r,Math.min(t,n.content.size))}}function eBe({decorations:e,ranges:t,editor:n,options:r,dataAttribute:i,doc:a,selection:o}){let s=e;for(let e of t){let{from:t,to:c}=$ze(e.from,e.to,a),l=s.find(t,c).filter(e=>e.from>=t&&e.to<=c);l.length&&(s=s.remove(l));let u=R4({editor:n,options:r,dataAttribute:i,doc:a,selection:o,from:t,to:c});u.length&&(s=s.add(a,u))}return s}function tBe({editor:e,options:t,dataAttribute:n}){return{init(r,i){return z4({editor:e,options:t,dataAttribute:n,doc:i.doc,selection:i.selection})??oQ.empty},apply(r,i,a,o){return!r.docChanged&&!r.selectionSet?i:eBe({decorations:i.map(r.mapping,r.doc),ranges:Qze(r,a,o),editor:e,options:t,dataAttribute:n,doc:o.doc,selection:o.selection})}}}function nBe(e){return e.replace(/\s+/g,`-`).replace(/[^a-zA-Z0-9-]/g,``).replace(/^[0-9-]+/,``).replace(/^-+/,``).toLowerCase()}function rBe({editor:e,options:t}){let n=t.dataAttribute?`data-${nBe(t.dataAttribute)}`:`data-${P4}`,r=t.showOnlyCurrent&&!t.includeChildren;return new mY({key:F4,...r?{}:{state:tBe({editor:e,options:t,dataAttribute:n})},props:{decorations:r?({doc:r,selection:i})=>z4({editor:e,options:t,dataAttribute:n,doc:r,selection:i}):n=>t.showOnlyWhenEditable&&!e.isEditable?oQ.empty:F4.getState(n)??oQ.empty}})}p1.create({name:`placeholder`,addOptions(){return{emptyEditorClass:`is-editor-empty`,emptyNodeClass:`is-empty`,dataAttribute:P4,placeholder:`Write something …`,showOnlyWhenEditable:!0,showOnlyCurrent:!0,includeChildren:!1}},addProseMirrorPlugins(){return[rBe({editor:this.editor,options:this.options})]}});function H4(e,t){return!e.selection.empty&&!I$(e.selection)&&t.isEditable}function iBe(e,t){return H4(e,t)&&!t.isFocused&&!t.view.dragging}function aBe(){var e;(e=window.getSelection())==null||e.removeAllRanges()}function oBe(e){e.focus()}p1.create({name:`selection`,addOptions(){return{className:`selection`}},addProseMirrorPlugins(){let{editor:e,options:t}=this;return[new mY({key:new _Y(`selection`),props:{decorations(n){return iBe(n,e)?oQ.create(n.doc,[rQ.inline(n.selection.from,n.selection.to,{class:t.className})]):null},handleDOMEvents:{blur(t){return H4(t.state,e)&&aBe(),!1},focus(t){return H4(t.state,e)&&requestAnimationFrame(()=>{!e.isDestroyed&&t.hasFocus()&&oBe(t)}),!1}}}})]}});function U4({types:e,node:t}){return t&&Array.isArray(e)&&e.includes(t.type)||t?.type===e}var sBe=p1.create({name:`trailingNode`,addOptions(){return{node:void 0,notAfter:[]}},addProseMirrorPlugins(){let e=new _Y(this.name),t=this.options.node||this.editor.schema.topNodeType.contentMatch.defaultType?.name||`paragraph`,n=Object.entries(this.editor.schema.nodes).map(([,e])=>e).filter(e=>(this.options.notAfter||[]).concat(t).includes(e.name));return[new mY({key:e,appendTransaction:(n,r,i)=>{let{doc:a,tr:o,schema:s}=i,c=e.getState(i),l=a.content.size,u=s.nodes[t];if(!n.some(e=>e.getMeta(`skipTrailingNode`))&&c)return o.insert(l,u.create())},state:{init:(e,t)=>{let r=t.tr.doc.lastChild;return!U4({node:r,types:n})},apply:(e,t)=>{if(!e.docChanged||e.getMeta(`__uniqueIDTransaction`))return t;let r=e.doc.lastChild;return!U4({node:r,types:n})}}})]}}),cBe=p1.create({name:`undoRedo`,addOptions(){return{depth:100,newGroupDelay:500}},addCommands(){return{undo:()=>({state:e,dispatch:t})=>M4(e,t),redo:()=>({state:e,dispatch:t})=>N4(e,t)}},addProseMirrorPlugins(){return[Kze(this.options)]},addKeyboardShortcuts(){return{"Mod-z":()=>this.editor.commands.undo(),"Shift-Mod-z":()=>this.editor.commands.redo(),"Mod-y":()=>this.editor.commands.redo(),"Mod-я":()=>this.editor.commands.undo(),"Shift-Mod-я":()=>this.editor.commands.redo()}}}),lBe=p1.create({name:`starterKit`,addExtensions(){let e=[];return this.options.bold!==!1&&e.push(XLe.configure(this.options.bold)),this.options.blockquote!==!1&&e.push(GLe.configure(this.options.blockquote)),this.options.bulletList!==!1&&e.push(U2.configure(this.options.bulletList)),this.options.code!==!1&&e.push($Le.configure(this.options.code)),this.options.codeBlock!==!1&&e.push(nRe.configure(this.options.codeBlock)),this.options.document!==!1&&e.push(rRe.configure(this.options.document)),this.options.dropcursor!==!1&&e.push(qze.configure(this.options.dropcursor)),this.options.gapcursor!==!1&&e.push(Jze.configure(this.options.gapcursor)),this.options.hardBreak!==!1&&e.push(iRe.configure(this.options.hardBreak)),this.options.heading!==!1&&e.push(aRe.configure(this.options.heading)),this.options.undoRedo!==!1&&e.push(cBe.configure(this.options.undoRedo)),this.options.horizontalRule!==!1&&e.push(oRe.configure(this.options.horizontalRule)),this.options.italic!==!1&&e.push(dRe.configure(this.options.italic)),this.options.listItem!==!1&&e.push(e4.configure(this.options.listItem)),this.options.listKeymap!==!1&&e.push(a4.configure(this.options?.listKeymap)),this.options.link!==!1&&e.push(B2.configure(this.options?.link)),this.options.orderedList!==!1&&e.push(f4.configure(this.options.orderedList)),this.options.paragraph!==!1&&e.push(Sze.configure(this.options.paragraph)),this.options.strike!==!1&&e.push(Tze.configure(this.options.strike)),this.options.text!==!1&&e.push(Eze.configure(this.options.text)),this.options.underline!==!1&&e.push(h4.configure(this.options?.underline)),this.options.trailingNode!==!1&&e.push(sBe.configure(this.options?.trailingNode)),e}}),uBe=p1.create({name:`textAlign`,addOptions(){return{types:[],alignments:[`left`,`center`,`right`,`justify`],defaultAlignment:null}},addGlobalAttributes(){return[{types:this.options.types,attributes:{textAlign:{default:this.options.defaultAlignment,parseHTML:e=>{let t=e.style.textAlign;return this.options.alignments.includes(t)?t:this.options.defaultAlignment},renderHTML:e=>e.textAlign?{style:`text-align: ${e.textAlign}`}:{}}}}]},addCommands(){return{setTextAlign:e=>({commands:t})=>this.options.alignments.includes(e)?this.options.types.map(n=>t.updateAttributes(n,{textAlign:e})).some(e=>e):!1,unsetTextAlign:()=>({commands:e})=>this.options.types.map(t=>e.resetAttributes(t,`textAlign`)).some(e=>e),toggleTextAlign:e=>({editor:t,commands:n})=>this.options.alignments.includes(e)?t.isActive({textAlign:e})?n.unsetTextAlign():n.setTextAlign(e):!1}},addKeyboardShortcuts(){return{"Mod-Shift-l":()=>this.editor.commands.setTextAlign(`left`),"Mod-Shift-e":()=>this.editor.commands.setTextAlign(`center`),"Mod-Shift-r":()=>this.editor.commands.setTextAlign(`right`),"Mod-Shift-j":()=>this.editor.commands.setTextAlign(`justify`)}}}),dBe=20,W4=(e,t=0)=>{let n=[];return!e.children.length||t>dBe||Array.from(e.children).forEach(e=>{e.tagName===`SPAN`?n.push(e):e.children.length&&n.push(...W4(e,t+1))}),n},fBe=e=>{if(!e.children.length)return;let t=W4(e);t&&t.forEach(e=>{var t;let n=e.getAttribute(`style`),r=(t=e.parentElement)==null||(t=t.closest(`span`))==null?void 0:t.getAttribute(`style`);e.setAttribute(`style`,`${r};${n}`)})},G4=l1.create({name:`textStyle`,priority:101,addOptions(){return{HTMLAttributes:{},mergeNestedSpanStyles:!0}},parseHTML(){return[{tag:`span`,consuming:!1,getAttrs:e=>e.hasAttribute(`style`)?(this.options.mergeNestedSpanStyles&&fBe(e),{}):!1}]},renderHTML({HTMLAttributes:e}){return[`span`,v$(this.options.HTMLAttributes,e),0]},addCommands(){return{toggleTextStyle:e=>({commands:t})=>t.toggleMark(this.name,e),removeEmptyTextStyle:()=>({tr:e})=>{let{selection:t}=e;return e.doc.nodesBetween(t.from,t.to,(t,n)=>{if(!t.isInline)return!0;t.marks.filter(e=>e.type===this.type).some(e=>Object.values(e.attrs).some(e=>!!e))||e.removeMark(n,n+t.nodeSize,this.type)}),!0}}}}),pBe=p1.create({name:`backgroundColor`,addOptions(){return{types:[`textStyle`]}},addGlobalAttributes(){return[{types:this.options.types,attributes:{backgroundColor:{default:null,parseHTML:e=>($$(e,`background-color`)??e.style.backgroundColor)?.replace(/['"]+/g,``),renderHTML:e=>e.backgroundColor?{style:`background-color: ${e.backgroundColor}`}:{}}}}]},addCommands(){return{setBackgroundColor:e=>({chain:t})=>t().setMark(`textStyle`,{backgroundColor:e}).run(),unsetBackgroundColor:()=>({chain:e})=>e().setMark(`textStyle`,{backgroundColor:null}).removeEmptyTextStyle().run()}}}),K4=p1.create({name:`color`,addOptions(){return{types:[`textStyle`]}},addGlobalAttributes(){return[{types:this.options.types,attributes:{color:{default:null,parseHTML:e=>($$(e,`color`)??e.style.color)?.replace(/['"]+/g,``),renderHTML:e=>e.color?{style:`color: ${e.color}`}:{}}}}]},addCommands(){return{setColor:e=>({chain:t})=>t().setMark(`textStyle`,{color:e}).run(),unsetColor:()=>({chain:e})=>e().setMark(`textStyle`,{color:null}).removeEmptyTextStyle().run()}}}),mBe=p1.create({name:`fontFamily`,addOptions(){return{types:[`textStyle`]}},addGlobalAttributes(){return[{types:this.options.types,attributes:{fontFamily:{default:null,parseHTML:e=>$$(e,`font-family`)??e.style.fontFamily,renderHTML:e=>e.fontFamily?{style:`font-family: ${e.fontFamily}`}:{}}}}]},addCommands(){return{setFontFamily:e=>({chain:t})=>t().setMark(`textStyle`,{fontFamily:e}).run(),unsetFontFamily:()=>({chain:e})=>e().setMark(`textStyle`,{fontFamily:null}).removeEmptyTextStyle().run()}}}),hBe=p1.create({name:`fontSize`,addOptions(){return{types:[`textStyle`]}},addGlobalAttributes(){return[{types:this.options.types,attributes:{fontSize:{default:null,parseHTML:e=>$$(e,`font-size`)??e.style.fontSize,renderHTML:e=>e.fontSize?{style:`font-size: ${e.fontSize}`}:{}}}}]},addCommands(){return{setFontSize:e=>({chain:t})=>t().setMark(`textStyle`,{fontSize:e}).run(),unsetFontSize:()=>({chain:e})=>e().setMark(`textStyle`,{fontSize:null}).removeEmptyTextStyle().run()}}}),gBe=p1.create({name:`lineHeight`,addOptions(){return{types:[`textStyle`]}},addGlobalAttributes(){return[{types:this.options.types,attributes:{lineHeight:{default:null,parseHTML:e=>$$(e,`line-height`)??e.style.lineHeight,renderHTML:e=>e.lineHeight?{style:`line-height: ${e.lineHeight}`}:{}}}}]},addCommands(){return{setLineHeight:e=>({chain:t})=>t().setMark(`textStyle`,{lineHeight:e}).run(),unsetLineHeight:()=>({chain:e})=>e().setMark(`textStyle`,{lineHeight:null}).removeEmptyTextStyle().run()}}});p1.create({name:`textStyleKit`,addExtensions(){let e=[];return this.options.backgroundColor!==!1&&e.push(pBe.configure(this.options.backgroundColor)),this.options.color!==!1&&e.push(K4.configure(this.options.color)),this.options.fontFamily!==!1&&e.push(mBe.configure(this.options.fontFamily)),this.options.fontSize!==!1&&e.push(hBe.configure(this.options.fontSize)),this.options.lineHeight!==!1&&e.push(gBe.configure(this.options.lineHeight)),this.options.textStyle!==!1&&e.push(G4.configure(this.options.textStyle)),e}});var _Be=K4,vBe=/(?:^|\s)(!\[(.+|:?)]\((\S+)(?:(?:\s+)["'](\S+)["'])?\))$/,yBe=y1.create({name:`image`,addOptions(){return{inline:!1,allowBase64:!1,HTMLAttributes:{},resize:!1}},inline(){return this.options.inline},group(){return this.options.inline?`inline`:`block`},draggable:!0,addAttributes(){return{src:{default:null},alt:{default:null},title:{default:null},width:{default:null},height:{default:null}}},parseHTML(){return[{tag:this.options.allowBase64?`img[src]`:`img[src]:not([src^="data:"])`}]},renderHTML({HTMLAttributes:e}){return[`img`,v$(this.options.HTMLAttributes,e)]},parseMarkdown:(e,t)=>t.createNode(`image`,{src:e.href,title:e.title,alt:e.text}),renderMarkdown:e=>{let t=e.attrs?.src??``,n=e.attrs?.alt??``,r=e.attrs?.title??``;return r?`![${n}](${t} "${r}")`:`![${n}](${t})`},addNodeView(){if(!this.options.resize||!this.options.resize.enabled||typeof document>`u`)return null;let{directions:e,minWidth:t,minHeight:n,alwaysPreserveAspectRatio:r}=this.options.resize,i=new Set([`src`,`width`,`height`]);return({node:a,getPos:o,HTMLAttributes:s,editor:c})=>{let l=document.createElement(`img`);l.draggable=!1;let u=v$(this.options.HTMLAttributes,s);Object.entries(u).forEach(([e,t])=>{if(t!=null)switch(e){case`src`:case`width`:case`height`:break;default:l.setAttribute(e,t)}}),u.src!==null&&(l.src=u.src);let d={...s},f=e=>{if(typeof e==`string`&&e!==``){l.getAttribute(`src`)!==e&&(l.src=e);return}l.hasAttribute(`src`)&&l.removeAttribute(`src`),l.src!==``&&(l.src=``)};f(s.src);let p=new HIe({element:l,editor:c,node:a,getPos:o,onResize:(e,t)=>{l.style.width=`${e}px`,l.style.height=`${t}px`},onCommit:(e,t)=>{let n=o();n!==void 0&&this.editor.chain().setNodeSelection(n).updateAttributes(this.name,{width:e,height:t}).run()},onUpdate:e=>{if(e.type!==a.type)return!1;let t=y$(e,c.extensionManager.attributes.filter(t=>t.type===e.type.name));return Object.keys(d).forEach(e=>{!i.has(e)&&!(e in t)&&l.removeAttribute(e)}),Object.entries(t).forEach(([e,t])=>{i.has(e)||(t==null?l.removeAttribute(e):l.setAttribute(e,t))}),f(t.src),d=t,!0},options:{directions:e,min:{width:t,height:n},preserveAspectRatio:r===!0}}),m=p.dom,h=()=>{m.style.visibility=``,m.style.pointerEvents=``};return m.style.visibility=`hidden`,m.style.pointerEvents=`none`,l.complete&&l.naturalWidth>0?h():(l.onload=h,l.onerror=h),p}},addCommands(){return{setImage:e=>({commands:t})=>t.insertContent({type:this.name,attrs:e})}},addInputRules(){return[g1({find:vBe,type:this.type,getAttributes:e=>{let[,,t,n,r]=e;return{src:n,alt:t,title:r}}})]}});function q4({content:e,onChange:t,placeholder:n}){let{t:r}=U(),i=RLe({extensions:[lBe.configure({heading:!1,codeBlock:!1,code:!1}),Dze,URe.configure({openOnClick:!1,HTMLAttributes:{target:`_blank`,rel:`noopener noreferrer`}}),uBe.configure({types:[`paragraph`]}),G4,_Be,yBe.configure({HTMLAttributes:{style:`max-width: 100%; height: auto;`}})],content:e,onUpdate:({editor:e})=>{t(e.getHTML())},editorProps:{attributes:{class:`prose prose-invert prose-sm max-w-none focus:outline-none min-h-[120px] px-3 py-2`,placeholder:n||``}}});if(!i)return null;let a=({onClick:e,isActive:t=!1,children:n,title:r})=>(0,G.jsx)(`button`,{type:`button`,onClick:e,title:r,className:`p-1.5 rounded hover:bg-bambu-dark-tertiary transition-colors ${t?`bg-bambu-dark-tertiary text-bambu-green`:`text-bambu-gray`}`,children:n});return(0,G.jsxs)(`div`,{className:`border border-bambu-dark-tertiary rounded-lg overflow-hidden bg-bambu-dark`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-0.5 p-1.5 border-b border-bambu-dark-tertiary bg-bambu-dark-secondary`,children:[(0,G.jsx)(a,{onClick:()=>i.chain().focus().toggleBold().run(),isActive:i.isActive(`bold`),title:r(`richTextEditor.bold`),children:(0,G.jsx)(Jo,{className:`w-4 h-4`})}),(0,G.jsx)(a,{onClick:()=>i.chain().focus().toggleItalic().run(),isActive:i.isActive(`italic`),title:r(`richTextEditor.italic`),children:(0,G.jsx)(Wc,{className:`w-4 h-4`})}),(0,G.jsx)(a,{onClick:()=>i.chain().focus().toggleUnderline().run(),isActive:i.isActive(`underline`),title:r(`richTextEditor.underline`),children:(0,G.jsx)(Lu,{className:`w-4 h-4`})}),(0,G.jsx)(`div`,{className:`w-px h-5 bg-bambu-dark-tertiary mx-1`}),(0,G.jsx)(a,{onClick:()=>i.chain().focus().toggleBulletList().run(),isActive:i.isActive(`bulletList`),title:r(`richTextEditor.bulletList`),children:(0,G.jsx)($c,{className:`w-4 h-4`})}),(0,G.jsx)(a,{onClick:()=>i.chain().focus().toggleOrderedList().run(),isActive:i.isActive(`orderedList`),title:r(`richTextEditor.numberedList`),children:(0,G.jsx)(Zc,{className:`w-4 h-4`})}),(0,G.jsx)(`div`,{className:`w-px h-5 bg-bambu-dark-tertiary mx-1`}),(0,G.jsx)(a,{onClick:()=>i.chain().focus().setTextAlign(`left`).run(),isActive:i.isActive({textAlign:`left`}),title:r(`richTextEditor.alignLeft`),children:(0,G.jsx)(Au,{className:`w-4 h-4`})}),(0,G.jsx)(a,{onClick:()=>i.chain().focus().setTextAlign(`center`).run(),isActive:i.isActive({textAlign:`center`}),title:r(`richTextEditor.alignCenter`),children:(0,G.jsx)(Ou,{className:`w-4 h-4`})}),(0,G.jsx)(a,{onClick:()=>i.chain().focus().setTextAlign(`right`).run(),isActive:i.isActive({textAlign:`right`}),title:r(`richTextEditor.alignRight`),children:(0,G.jsx)(ku,{className:`w-4 h-4`})}),(0,G.jsx)(`div`,{className:`w-px h-5 bg-bambu-dark-tertiary mx-1`}),(0,G.jsx)(a,{onClick:()=>{let e=window.prompt(`Enter URL:`);e&&i.chain().focus().setLink({href:e}).run()},isActive:i.isActive(`link`),title:r(`richTextEditor.addLink`),children:(0,G.jsx)(Xc,{className:`w-4 h-4`})}),i.isActive(`link`)&&(0,G.jsx)(a,{onClick:()=>i.chain().focus().unsetLink().run(),title:r(`richTextEditor.removeLink`),children:(0,G.jsx)(zu,{className:`w-4 h-4`})})]}),(0,G.jsx)(N1,{editor:i})]})}function J4({archiveId:e,archiveName:t,onClose:n}){let r=co(),[i,a]=(0,y.useState)(!1),[o,s]=(0,y.useState)(null),[c,l]=(0,y.useState)({}),{data:u,isLoading:d,error:f}=K({queryKey:[`archive-project-page`,e],queryFn:()=>Z.getArchiveProjectPage(e)}),p=q({mutationFn:t=>Z.updateArchiveProjectPage(e,t),onSuccess:()=>{r.invalidateQueries({queryKey:[`archive-project-page`,e]}),a(!1),l({})}});(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&(o===null?i?_():n():s(null))};return document.addEventListener(`keydown`,e),()=>document.removeEventListener(`keydown`,e)},[o,i,n]);let m=[...u?.model_pictures||[],...u?.profile_pictures||[]],h=()=>{l({title:u?.title||``,description:u?.description||``,designer:u?.designer||``,license:u?.license||``,profile_title:u?.profile_title||``,profile_description:u?.profile_description||``}),a(!0)},g=()=>{p.mutate(c)},_=()=>{a(!1),l({})},v=e=>nq.sanitize(e,{ALLOWED_TAGS:[`p`,`br`,`b`,`strong`,`i`,`em`,`u`,`a`,`ul`,`ol`,`li`,`figure`,`img`],ALLOWED_ATTR:[`href`,`src`,`target`,`rel`,`style`],ADD_ATTR:[`target`]}),b=u&&(u.title||u.description||u.designer||u.profile_title||m.length>0);return(0,G.jsxs)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:e=>{e.target===e.currentTarget&&n()},children:[(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl max-w-4xl w-full max-h-[90vh] overflow-hidden flex flex-col`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(dc,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white`,children:[`Project Page`,t&&(0,G.jsxs)(`span`,{className:`text-bambu-gray ml-2`,children:[`- `,t]})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[!i&&b&&(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:h,children:[(0,G.jsx)(Dl,{className:`w-4 h-4 mr-1`}),`Edit`]}),i&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:_,children:`Cancel`}),(0,G.jsxs)(Q,{variant:`primary`,size:`sm`,onClick:g,disabled:p.isPending,children:[(0,G.jsx)(Kl,{className:`w-4 h-4 mr-1`}),`Save`]})]}),(0,G.jsx)(`button`,{onClick:n,className:`p-2 hover:bg-bambu-dark-tertiary rounded-lg transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5 text-bambu-gray`})})]})]}),(0,G.jsxs)(`div`,{className:`flex-1 overflow-y-auto p-6`,children:[d&&(0,G.jsx)(`div`,{className:`flex items-center justify-center py-12`,children:(0,G.jsx)(`div`,{className:`animate-spin rounded-full h-8 w-8 border-2 border-bambu-green border-t-transparent`})}),f&&(0,G.jsx)(`div`,{className:`text-red-700 dark:text-red-400 text-center py-12`,children:`Failed to load project page data`}),u&&!b&&(0,G.jsxs)(`div`,{className:`text-bambu-gray text-center py-12`,children:[(0,G.jsx)(dc,{className:`w-12 h-12 mx-auto mb-4 opacity-50`}),(0,G.jsx)(`p`,{children:`No project page data found in this 3MF file.`}),(0,G.jsx)(`p`,{className:`text-sm mt-2`,children:`Project pages are typically included in files downloaded from MakerWorld.`})]}),u&&b&&(0,G.jsxs)(`div`,{className:`space-y-6`,children:[(0,G.jsxs)(`div`,{className:`space-y-4`,children:[i?(0,G.jsx)(`input`,{type:`text`,value:c.title||``,onChange:e=>l({...c,title:e.target.value}),placeholder:`Title`,className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded-lg px-4 py-2 text-white text-xl font-semibold`}):u.title&&(0,G.jsx)(`h3`,{className:`text-xl font-semibold text-white`,children:u.title}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-4 text-sm`,children:[i?(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Vu,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:c.designer||``,onChange:e=>l({...c,designer:e.target.value}),placeholder:`Designer`,className:`bg-bambu-dark border border-bambu-dark-tertiary rounded px-2 py-1 text-white`})]}):u.designer&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray`,children:[(0,G.jsx)(Vu,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:u.designer}),u.designer_user_id&&(0,G.jsx)(`a`,{href:`https://makerworld.com/en/@${u.designer_user_id}`,target:`_blank`,rel:`noopener noreferrer`,className:`text-bambu-green hover:underline`,children:(0,G.jsx)(nc,{className:`w-3 h-3`})})]}),u.creation_date&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray`,children:[(0,G.jsx)(as,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:u.creation_date})]}),i?(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(dc,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:c.license||``,onChange:e=>l({...c,license:e.target.value}),placeholder:`License`,className:`bg-bambu-dark border border-bambu-dark-tertiary rounded px-2 py-1 text-white`})]}):u.license&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray`,children:[(0,G.jsx)(dc,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:u.license})]}),u.origin&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-bambu-dark rounded text-bambu-gray`,children:u.origin})]})]}),(u.description||i)&&(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray uppercase tracking-wide`,children:`Description`}),i?(0,G.jsx)(q4,{content:c.description||``,onChange:e=>l({...c,description:e}),placeholder:`Enter description...`}):(0,G.jsx)(`div`,{className:`prose prose-invert prose-sm max-w-none text-bambu-gray-light`,dangerouslySetInnerHTML:{__html:v(u.description||``)}})]}),(u.profile_title||u.profile_description||i)&&(0,G.jsxs)(`div`,{className:`space-y-2 p-4 bg-bambu-dark rounded-lg`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray uppercase tracking-wide`,children:`Print Profile`}),i?(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`input`,{type:`text`,value:c.profile_title||``,onChange:e=>l({...c,profile_title:e.target.value}),placeholder:`Profile Title`,className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-white`}),(0,G.jsx)(q4,{content:c.profile_description||``,onChange:e=>l({...c,profile_description:e}),placeholder:`Profile description...`})]}):(0,G.jsxs)(G.Fragment,{children:[u.profile_title&&(0,G.jsx)(`p`,{className:`text-white font-medium`,children:u.profile_title}),u.profile_description&&(0,G.jsx)(`div`,{className:`prose prose-invert prose-sm max-w-none text-bambu-gray-light`,dangerouslySetInnerHTML:{__html:v(u.profile_description)}}),u.profile_user_name&&(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[`by `,u.profile_user_name]})]})]}),m.length>0&&(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`h4`,{className:`text-sm font-medium text-bambu-gray uppercase tracking-wide flex items-center gap-2`,children:[(0,G.jsx)(Vc,{className:`w-4 h-4`}),`Images (`,m.length,`)`]}),(0,G.jsx)(`div`,{className:`grid grid-cols-3 sm:grid-cols-4 md:grid-cols-5 gap-2`,children:m.map((e,t)=>(0,G.jsx)(`button`,{onClick:()=>s(t),className:`aspect-square rounded-lg overflow-hidden border border-bambu-dark-tertiary hover:border-bambu-green transition-colors`,children:(0,G.jsx)(`img`,{src:_d(e.url),alt:e.name,className:`w-full h-full object-cover`})},e.path))})]}),u.design_model_id&&(0,G.jsx)(`div`,{className:`pt-4 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`a`,{href:`https://makerworld.com/en/models/${u.design_model_id}`,target:`_blank`,rel:`noopener noreferrer`,className:`inline-flex items-center gap-2 text-bambu-green hover:underline`,children:[(0,G.jsx)(nc,{className:`w-4 h-4`}),`View on MakerWorld`]})})]})]})]}),o!==null&&m[o]&&(0,G.jsxs)(`div`,{className:`fixed inset-0 bg-black/90 flex items-center justify-center z-60`,onClick:()=>s(null),children:[(0,G.jsx)(`button`,{onClick:e=>{e.stopPropagation(),s(Math.max(0,o-1))},disabled:o===0,className:`absolute left-4 p-2 bg-bambu-dark-secondary rounded-full hover:bg-bambu-dark-tertiary disabled:opacity-30`,children:(0,G.jsx)(hs,{className:`w-6 h-6 text-white`})}),(0,G.jsx)(`img`,{src:_d(m[o].url),alt:m[o].name,className:`max-w-[90vw] max-h-[90vh] object-contain`,onClick:e=>e.stopPropagation()}),(0,G.jsx)(`button`,{onClick:e=>{e.stopPropagation(),s(Math.min(m.length-1,o+1))},disabled:o===m.length-1,className:`absolute right-4 p-2 bg-bambu-dark-secondary rounded-full hover:bg-bambu-dark-tertiary disabled:opacity-30`,children:(0,G.jsx)(ms,{className:`w-6 h-6 text-white`})}),(0,G.jsx)(`button`,{onClick:()=>s(null),className:`absolute top-4 right-4 p-2 bg-bambu-dark-secondary rounded-full hover:bg-bambu-dark-tertiary`,children:(0,G.jsx)(td,{className:`w-6 h-6 text-white`})}),(0,G.jsxs)(`div`,{className:`absolute bottom-4 text-white text-sm`,children:[o+1,` / `,m.length]})]})]})}var bBe=[.25,.5,.75,1,1.5,2,3,4];function xBe({archiveId:e,timelapseSrc:t,onClose:n,onSave:r}){let{showToast:i}=Gd(),a=(0,y.useRef)(null),o=(0,y.useRef)(null),[s,c]=(0,y.useState)(!1),[l,u]=(0,y.useState)(0),[d,f]=(0,y.useState)(0),[p,m]=(0,y.useState)(0),[h,g]=(0,y.useState)(0),[_,v]=(0,y.useState)(1),[b,x]=(0,y.useState)(null),[S,C]=(0,y.useState)(null),[w,T]=(0,y.useState)(.8),[E,D]=(0,y.useState)(!1),{data:O,isLoading:k}=K({queryKey:[`timelapse-info`,e],queryFn:()=>Z.getTimelapseInfo(e)}),{data:A}=K({queryKey:[`timelapse-thumbnails`,e],queryFn:()=>Z.getTimelapseThumbnails(e,15)}),j=q({mutationFn:()=>Z.processTimelapse(e,{trimStart:p,trimEnd:h,speed:_,saveMode:`replace`},b||void 0),onSuccess:e=>{i(e.message,`success`),r?.(),n()},onError:e=>{i(e.message||`Processing failed`,`error`)}});(0,y.useEffect)(()=>{O?.duration&&h===0&&g(O.duration)},[O?.duration,h]),(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&n()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[n]),(0,y.useEffect)(()=>{let e=a.current;if(!e)return;let t=()=>{let t=e.currentTime;u(t),t>=h&&(e.currentTime=p)},n=()=>{f(e.duration),h===0&&g(e.duration)},r=()=>c(!0),i=()=>c(!1);return e.addEventListener(`timeupdate`,t),e.addEventListener(`durationchange`,n),e.addEventListener(`play`,r),e.addEventListener(`pause`,i),()=>{e.removeEventListener(`timeupdate`,t),e.removeEventListener(`durationchange`,n),e.removeEventListener(`play`,r),e.removeEventListener(`pause`,i)}},[p,h]),(0,y.useEffect)(()=>{let e=o.current,t=a.current;!e||!t||!S||(e.currentTime=t.currentTime,e.playbackRate=t.playbackRate,s&&!E?e.play().catch(()=>{}):e.pause())},[s,S,E]),(0,y.useEffect)(()=>{o.current&&(o.current.volume=E?0:w)},[w,E]),(0,y.useEffect)(()=>{a.current&&(a.current.playbackRate=_),o.current&&(o.current.playbackRate=_)},[_]);let M=(0,y.useCallback)(()=>{let e=a.current;e&&(s?e.pause():(e.currentTime<p&&(e.currentTime=p),e.play()))},[s,p]),N=e=>{let t=a.current;t&&(t.currentTime=Math.max(p,Math.min(h,e)))},P=e=>{let t=e.target.files?.[0];t&&(S&&URL.revokeObjectURL(S),x(t),C(URL.createObjectURL(t)))},F=()=>{S&&URL.revokeObjectURL(S),x(null),C(null)};(0,y.useEffect)(()=>()=>{S&&URL.revokeObjectURL(S)},[S]);let I=h-p,L=I/_;return k?(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/80`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-3 text-white`,children:[(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin`}),`Loading video info...`]})}):(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/80`,children:(0,G.jsxs)(`div`,{className:`relative bg-bambu-dark-secondary rounded-xl max-w-5xl w-full mx-4 max-h-[90vh] overflow-hidden flex flex-col`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary shrink-0`,children:[(0,G.jsxs)(`h3`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(pc,{className:`w-5 h-5 text-bambu-green`}),`Edit Timelapse`]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Q,{variant:`primary`,size:`sm`,onClick:()=>j.mutate(),disabled:j.isPending,children:j.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),`Processing...`]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Kl,{className:`w-4 h-4`}),`Save`]})}),(0,G.jsx)(`button`,{onClick:n,className:`p-1 hover:bg-bambu-dark-tertiary rounded transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5 text-bambu-gray`})})]})]}),(0,G.jsxs)(`div`,{className:`flex-1 overflow-y-auto p-4 space-y-4`,children:[(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`video`,{ref:a,src:t,className:`w-full rounded-lg bg-black`,onClick:M,muted:!!S}),!s&&(0,G.jsx)(`button`,{onClick:M,className:`absolute inset-0 flex items-center justify-center bg-black/30 hover:bg-black/40 transition-colors`,children:(0,G.jsx)(`div`,{className:`p-4 bg-bambu-green rounded-full`,children:(0,G.jsx)(Ml,{className:`w-8 h-8 text-white`})})}),S&&(0,G.jsx)(`audio`,{ref:o,src:S,loop:!0})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(Xl,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:`Trim`}),(0,G.jsxs)(`span`,{className:`ml-auto`,children:[cp(p),` - `,cp(h),` (`,cp(I),`)`]})]}),(0,G.jsxs)(`div`,{className:`relative h-16 bg-bambu-dark rounded-lg overflow-hidden`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 flex`,children:A?.thumbnails.map((e,t)=>(0,G.jsx)(`div`,{className:`flex-1 bg-cover bg-center`,style:{backgroundImage:`url(data:image/jpeg;base64,${e})`}},t))}),(0,G.jsx)(`div`,{className:`absolute inset-y-0 left-0 bg-black/60`,style:{width:`${p/d*100}%`}}),(0,G.jsx)(`div`,{className:`absolute inset-y-0 right-0 bg-black/60`,style:{width:`${(d-h)/d*100}%`}}),(0,G.jsx)(`div`,{className:`absolute inset-y-0 border-2 border-bambu-green`,style:{left:`${p/d*100}%`,right:`${(d-h)/d*100}%`}}),(0,G.jsx)(`div`,{className:`absolute top-0 bottom-0 w-0.5 bg-white shadow-lg`,style:{left:`${l/d*100}%`}}),(0,G.jsx)(`input`,{type:`range`,min:0,max:d,step:.1,value:p,onChange:e=>{let t=parseFloat(e.target.value);t<h-1&&(m(t),a.current&&a.current.currentTime<t&&(a.current.currentTime=t))},className:`absolute inset-0 w-full opacity-0 cursor-ew-resize`,style:{clipPath:`inset(0 50% 0 0)`}}),(0,G.jsx)(`input`,{type:`range`,min:0,max:d,step:.1,value:h,onChange:e=>{let t=parseFloat(e.target.value);t>p+1&&g(t)},className:`absolute inset-0 w-full opacity-0 cursor-ew-resize`,style:{clipPath:`inset(0 0 0 50%)`}})]}),(0,G.jsx)(`input`,{type:`range`,min:0,max:d,step:.1,value:l,onChange:e=>N(parseFloat(e.target.value)),className:`w-full h-1 bg-bambu-dark-tertiary rounded-lg appearance-none cursor-pointer
                 [&::-webkit-slider-thumb]:appearance-none [&::-webkit-slider-thumb]:w-3 [&::-webkit-slider-thumb]:h-3
                 [&::-webkit-slider-thumb]:bg-bambu-green [&::-webkit-slider-thumb]:rounded-full
-                [&::-webkit-slider-thumb]:cursor-pointer`}),(0,G.jsx)(`div`,{className:`flex items-center justify-center gap-2`,children:(0,G.jsx)(`button`,{onClick:M,className:`p-2 bg-bambu-green hover:bg-bambu-green-dark rounded-lg transition-colors`,children:s?(0,G.jsx)(El,{className:`w-5 h-5 text-white`}):(0,G.jsx)(Ml,{className:`w-5 h-5 text-white`})})})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(wc,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:`Speed`}),(0,G.jsxs)(`span`,{className:`ml-auto`,children:[_,`x (output: `,cp(L),`)`]})]}),(0,G.jsx)(`div`,{className:`flex gap-1`,children:yBe.map(e=>(0,G.jsxs)(`button`,{onClick:()=>v(e),className:`flex-1 px-2 py-2 text-sm rounded transition-colors ${_===e?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:[e,`x`]},e))})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(yl,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:`Music Overlay`})]}),b?(0,G.jsxs)(`div`,{className:`flex items-center gap-3 p-3 bg-bambu-dark rounded-lg`,children:[(0,G.jsx)(yl,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white truncate`,children:b.name}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[(b.size/1024/1024).toFixed(1),` MB`]})]}),(0,G.jsx)(`button`,{onClick:()=>D(!E),className:`p-2 hover:bg-bambu-dark-tertiary rounded transition-colors`,children:E?(0,G.jsx)(Ku,{className:`w-4 h-4 text-bambu-gray`}):(0,G.jsx)(Gu,{className:`w-4 h-4 text-bambu-green`})}),(0,G.jsx)(`input`,{type:`range`,min:0,max:1,step:.1,value:w,onChange:e=>T(parseFloat(e.target.value)),className:`w-20 h-1 bg-bambu-dark-tertiary rounded-lg appearance-none cursor-pointer
+                [&::-webkit-slider-thumb]:cursor-pointer`}),(0,G.jsx)(`div`,{className:`flex items-center justify-center gap-2`,children:(0,G.jsx)(`button`,{onClick:M,className:`p-2 bg-bambu-green hover:bg-bambu-green-dark rounded-lg transition-colors`,children:s?(0,G.jsx)(El,{className:`w-5 h-5 text-white`}):(0,G.jsx)(Ml,{className:`w-5 h-5 text-white`})})})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(wc,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:`Speed`}),(0,G.jsxs)(`span`,{className:`ml-auto`,children:[_,`x (output: `,cp(L),`)`]})]}),(0,G.jsx)(`div`,{className:`flex gap-1`,children:bBe.map(e=>(0,G.jsxs)(`button`,{onClick:()=>v(e),className:`flex-1 px-2 py-2 text-sm rounded transition-colors ${_===e?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:[e,`x`]},e))})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(yl,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:`Music Overlay`})]}),b?(0,G.jsxs)(`div`,{className:`flex items-center gap-3 p-3 bg-bambu-dark rounded-lg`,children:[(0,G.jsx)(yl,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white truncate`,children:b.name}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[(b.size/1024/1024).toFixed(1),` MB`]})]}),(0,G.jsx)(`button`,{onClick:()=>D(!E),className:`p-2 hover:bg-bambu-dark-tertiary rounded transition-colors`,children:E?(0,G.jsx)(Ku,{className:`w-4 h-4 text-bambu-gray`}):(0,G.jsx)(Gu,{className:`w-4 h-4 text-bambu-green`})}),(0,G.jsx)(`input`,{type:`range`,min:0,max:1,step:.1,value:w,onChange:e=>T(parseFloat(e.target.value)),className:`w-20 h-1 bg-bambu-dark-tertiary rounded-lg appearance-none cursor-pointer
                     [&::-webkit-slider-thumb]:appearance-none [&::-webkit-slider-thumb]:w-3 [&::-webkit-slider-thumb]:h-3
-                    [&::-webkit-slider-thumb]:bg-bambu-green [&::-webkit-slider-thumb]:rounded-full`}),(0,G.jsx)(`button`,{onClick:F,className:`p-2 hover:bg-red-100 dark:hover:bg-red-500/20 rounded transition-colors`,children:(0,G.jsx)(Nu,{className:`w-4 h-4 text-red-600 dark:text-red-400`})})]}):(0,G.jsxs)(`label`,{className:`flex flex-col items-center justify-center gap-2 p-6 border-2 border-dashed border-bambu-dark-tertiary rounded-lg cursor-pointer hover:border-bambu-green/50 transition-colors`,children:[(0,G.jsx)(Bu,{className:`w-8 h-8 text-bambu-gray`}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:`Drop audio file or click to upload`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray/60`,children:`MP3, WAV, M4A, AAC, OGG`}),(0,G.jsx)(`input`,{type:`file`,accept:`.mp3,.wav,.m4a,.aac,.ogg,audio/*`,onChange:P,className:`hidden`})]})]}),(0,G.jsxs)(`div`,{className:`p-3 bg-bambu-dark rounded-lg text-sm space-y-1`,children:[(0,G.jsxs)(`p`,{className:`text-bambu-gray`,children:[(0,G.jsx)(`span`,{className:`text-white`,children:`Original:`}),` `,cp(d),` @ `,O?.width,`x`,O?.height]}),(0,G.jsxs)(`p`,{className:`text-bambu-gray`,children:[(0,G.jsx)(`span`,{className:`text-white`,children:`Output:`}),` `,cp(L),` @ `,_,`x speed`,b&&` + music overlay`]})]})]}),j.isPending&&(0,G.jsxs)(`div`,{className:`absolute inset-0 bg-black/80 flex flex-col items-center justify-center gap-4`,children:[(0,G.jsx)(Y,{className:`w-12 h-12 text-bambu-green animate-spin`}),(0,G.jsx)(`p`,{className:`text-white text-lg`,children:`Processing timelapse...`}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm`,children:`This may take a few moments`})]})]})})}var xBe=[.25,.5,.75,1,1.5,2,3,4];function K4({src:e,title:t,downloadFilename:n,archiveId:r,onClose:i,onEdit:a}){let o=(0,y.useRef)(null),[s,c]=(0,y.useState)(!0),[l,u]=(0,y.useState)(1),[d,f]=(0,y.useState)(0),[p,m]=(0,y.useState)(0),[h,g]=(0,y.useState)(!1);(0,y.useEffect)(()=>{let e=o.current;e&&(e.playbackRate=l)},[l]),(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&i()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[i]),(0,y.useEffect)(()=>{let e=o.current;if(!e)return;let t=()=>f(e.currentTime),n=()=>m(e.duration),r=()=>c(!0),i=()=>c(!1);return e.addEventListener(`timeupdate`,t),e.addEventListener(`durationchange`,n),e.addEventListener(`play`,r),e.addEventListener(`pause`,i),()=>{e.removeEventListener(`timeupdate`,t),e.removeEventListener(`durationchange`,n),e.removeEventListener(`play`,r),e.removeEventListener(`pause`,i)}},[]);let _=()=>{let e=o.current;e&&(s?e.pause():e.play())};return(0,G.jsxs)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/80`,children:[(0,G.jsxs)(`div`,{className:`relative bg-bambu-dark-secondary rounded-xl max-w-4xl w-full mx-4 overflow-hidden`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`h3`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(pc,{className:`w-5 h-5 text-bambu-green`}),t]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[r&&(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>g(!0),children:[(0,G.jsx)(kl,{className:`w-4 h-4`}),`Edit`]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>{let t=document.createElement(`a`);t.href=e,t.download=n,t.click()},children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),`Download`]}),(0,G.jsx)(`button`,{onClick:i,className:`p-1 hover:bg-bambu-dark-tertiary rounded transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5 text-bambu-gray`})})]})]}),(0,G.jsxs)(`div`,{className:`p-4`,children:[(0,G.jsx)(`video`,{ref:o,src:e,autoPlay:!0,className:`w-full rounded-lg`,onClick:_}),(0,G.jsxs)(`div`,{className:`mt-4 space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray w-12 text-right`,children:cp(d)}),(0,G.jsx)(`input`,{type:`range`,min:0,max:p||100,value:d,onChange:e=>{let t=o.current;t&&(t.currentTime=parseFloat(e.target.value))},className:`flex-1 h-1 bg-bambu-dark-tertiary rounded-lg appearance-none cursor-pointer
+                    [&::-webkit-slider-thumb]:bg-bambu-green [&::-webkit-slider-thumb]:rounded-full`}),(0,G.jsx)(`button`,{onClick:F,className:`p-2 hover:bg-red-100 dark:hover:bg-red-500/20 rounded transition-colors`,children:(0,G.jsx)(Nu,{className:`w-4 h-4 text-red-600 dark:text-red-400`})})]}):(0,G.jsxs)(`label`,{className:`flex flex-col items-center justify-center gap-2 p-6 border-2 border-dashed border-bambu-dark-tertiary rounded-lg cursor-pointer hover:border-bambu-green/50 transition-colors`,children:[(0,G.jsx)(Bu,{className:`w-8 h-8 text-bambu-gray`}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:`Drop audio file or click to upload`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray/60`,children:`MP3, WAV, M4A, AAC, OGG`}),(0,G.jsx)(`input`,{type:`file`,accept:`.mp3,.wav,.m4a,.aac,.ogg,audio/*`,onChange:P,className:`hidden`})]})]}),(0,G.jsxs)(`div`,{className:`p-3 bg-bambu-dark rounded-lg text-sm space-y-1`,children:[(0,G.jsxs)(`p`,{className:`text-bambu-gray`,children:[(0,G.jsx)(`span`,{className:`text-white`,children:`Original:`}),` `,cp(d),` @ `,O?.width,`x`,O?.height]}),(0,G.jsxs)(`p`,{className:`text-bambu-gray`,children:[(0,G.jsx)(`span`,{className:`text-white`,children:`Output:`}),` `,cp(L),` @ `,_,`x speed`,b&&` + music overlay`]})]})]}),j.isPending&&(0,G.jsxs)(`div`,{className:`absolute inset-0 bg-black/80 flex flex-col items-center justify-center gap-4`,children:[(0,G.jsx)(Y,{className:`w-12 h-12 text-bambu-green animate-spin`}),(0,G.jsx)(`p`,{className:`text-white text-lg`,children:`Processing timelapse...`}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm`,children:`This may take a few moments`})]})]})})}var SBe=[.25,.5,.75,1,1.5,2,3,4];function Y4({src:e,title:t,downloadFilename:n,archiveId:r,onClose:i,onEdit:a}){let o=(0,y.useRef)(null),[s,c]=(0,y.useState)(!0),[l,u]=(0,y.useState)(1),[d,f]=(0,y.useState)(0),[p,m]=(0,y.useState)(0),[h,g]=(0,y.useState)(!1);(0,y.useEffect)(()=>{let e=o.current;e&&(e.playbackRate=l)},[l]),(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&i()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[i]),(0,y.useEffect)(()=>{let e=o.current;if(!e)return;let t=()=>f(e.currentTime),n=()=>m(e.duration),r=()=>c(!0),i=()=>c(!1);return e.addEventListener(`timeupdate`,t),e.addEventListener(`durationchange`,n),e.addEventListener(`play`,r),e.addEventListener(`pause`,i),()=>{e.removeEventListener(`timeupdate`,t),e.removeEventListener(`durationchange`,n),e.removeEventListener(`play`,r),e.removeEventListener(`pause`,i)}},[]);let _=()=>{let e=o.current;e&&(s?e.pause():e.play())};return(0,G.jsxs)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/80`,children:[(0,G.jsxs)(`div`,{className:`relative bg-bambu-dark-secondary rounded-xl max-w-4xl w-full mx-4 overflow-hidden`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`h3`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(pc,{className:`w-5 h-5 text-bambu-green`}),t]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[r&&(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>g(!0),children:[(0,G.jsx)(kl,{className:`w-4 h-4`}),`Edit`]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>{let t=document.createElement(`a`);t.href=e,t.download=n,t.click()},children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),`Download`]}),(0,G.jsx)(`button`,{onClick:i,className:`p-1 hover:bg-bambu-dark-tertiary rounded transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5 text-bambu-gray`})})]})]}),(0,G.jsxs)(`div`,{className:`p-4`,children:[(0,G.jsx)(`video`,{ref:o,src:e,autoPlay:!0,className:`w-full rounded-lg`,onClick:_}),(0,G.jsxs)(`div`,{className:`mt-4 space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray w-12 text-right`,children:cp(d)}),(0,G.jsx)(`input`,{type:`range`,min:0,max:p||100,value:d,onChange:e=>{let t=o.current;t&&(t.currentTime=parseFloat(e.target.value))},className:`flex-1 h-1 bg-bambu-dark-tertiary rounded-lg appearance-none cursor-pointer
                   [&::-webkit-slider-thumb]:appearance-none [&::-webkit-slider-thumb]:w-3 [&::-webkit-slider-thumb]:h-3
                   [&::-webkit-slider-thumb]:bg-bambu-green [&::-webkit-slider-thumb]:rounded-full
-                  [&::-webkit-slider-thumb]:cursor-pointer`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray w-12`,children:cp(p)})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`button`,{onClick:()=>{let e=o.current;e&&(e.currentTime=Math.max(0,e.currentTime-5))},className:`p-2 hover:bg-bambu-dark-tertiary rounded-lg transition-colors`,title:`Skip back 5s`,children:(0,G.jsx)(lu,{className:`w-5 h-5 text-bambu-gray`})}),(0,G.jsx)(`button`,{onClick:_,className:`p-2 bg-bambu-green hover:bg-bambu-green-dark rounded-lg transition-colors`,children:s?(0,G.jsx)(El,{className:`w-5 h-5 text-white`}):(0,G.jsx)(Ml,{className:`w-5 h-5 text-white`})}),(0,G.jsx)(`button`,{onClick:()=>{let e=o.current;e&&(e.currentTime=Math.min(p,e.currentTime+5))},className:`p-2 hover:bg-bambu-dark-tertiary rounded-lg transition-colors`,title:`Skip forward 5s`,children:(0,G.jsx)(uu,{className:`w-5 h-5 text-bambu-gray`})})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:`Speed:`}),(0,G.jsx)(`div`,{className:`flex gap-1`,children:xBe.map(e=>(0,G.jsxs)(`button`,{onClick:()=>u(e),className:`px-2 py-1 text-xs rounded transition-colors ${l===e?`bg-bambu-green text-white`:`bg-bambu-dark-tertiary text-bambu-gray hover:bg-bambu-dark-tertiary/80`}`,children:[e,`x`]},e))})]})]})]})]})]}),h&&r&&(0,G.jsx)(bBe,{archiveId:r,timelapseSrc:e,onClose:()=>g(!1),onSave:a})]})}function q4({archiveId:e,archiveName:t,printerName:n,onClose:r}){let{t:i}=U(),{showToast:a}=Gd(),[o,s]=(0,y.useState)(new Set),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(null),f=(0,y.useRef)(null),p=(0,y.useRef)(null),m=K({queryKey:[`archive-printer-media`,e],queryFn:()=>Z.getArchivePrinterMedia(e),staleTime:6e4}),h=(0,y.useMemo)(()=>m.data?.remote_files??[],[m.data]);(0,y.useEffect)(()=>{!m.data||f.current===e||(f.current=e,h.length===1&&s(new Set([h[0].path])))},[e,m.data,h]),(0,y.useEffect)(()=>{let e=new Set(h.map(e=>e.path));s(t=>new Set([...t].filter(t=>e.has(t))))},[h]),(0,y.useEffect)(()=>()=>p.current?.abort(),[]),(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&r()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[r]);let g=e=>{s(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},_=async()=>{let n=m.data?.local_timelapse?.name??``,r=n.includes(`.`)?`.${n.split(`.`).pop()}`:``;try{await Z.downloadArchiveTimelapse(e,`${t}_timelapse${r}`)}catch(e){a(i(`printerFiles.downloadFailed`,{error:e instanceof Error?e.message:i(`printerFiles.unknownError`)}),`error`)}},v=async()=>{if(!m.data?.printer_id||o.size===0)return;let e=h.filter(e=>o.has(e.path));if(e.length===0)return;let n=new AbortController;p.current=n,l(!0);try{let r=await Z.downloadPrinterFilesAsZip(m.data.printer_id,e.map(e=>e.path),Object.fromEntries(e.map(e=>[e.path,e.size])),`${t.replace(/[^a-zA-Z0-9]/g,`_`)}-printer-videos.zip`,!0,n.signal,(e,t)=>d({current:e,total:t}));r.failed>0?a(i(`printerFiles.zipPartial`,{successful:r.successful,total:r.requested}),`warning`):a(i(`printerFiles.zipStarted`,{count:r.successful}))}catch(e){a(i(`printerFiles.downloadFailed`,{error:e instanceof Error?e.message:i(`printerFiles.unknownError`)}),`error`)}finally{p.current===n&&(p.current=null),d(null),l(!1)}},b=!!m.data?.local_timelapse||h.length>0,x=e=>i(e===`printer_files_forbidden`?`printers.permission.noFiles`:e===`printer_missing`?`archives.media.printerMissing`:e===`timelapse_unavailable`?`archives.media.timelapseUnavailable`:`archives.media.ipcamUnavailable`),S=(m.data?.warnings??[]).map(e=>(0,G.jsx)(`p`,{className:`text-xs text-amber-600 dark:text-amber-400`,children:x(e)},e));return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/80 p-4`,onClick:r,children:(0,G.jsxs)(`div`,{className:`flex max-h-[85vh] w-full max-w-2xl flex-col overflow-hidden rounded-xl border border-bambu-dark-tertiary bg-bambu-dark-secondary`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between border-b border-bambu-dark-tertiary p-4`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsxs)(`h3`,{className:`flex items-center gap-2 text-lg font-semibold text-white`,children:[(0,G.jsx)(Wu,{className:`h-5 w-5 text-bambu-green`}),i(`archives.media.title`)]}),(0,G.jsxs)(`p`,{className:`truncate text-sm text-bambu-gray`,children:[t,` · `,n]})]}),(0,G.jsx)(`button`,{onClick:r,className:`rounded p-1 text-bambu-gray hover:bg-bambu-dark-tertiary hover:text-white`,children:(0,G.jsx)(td,{className:`h-5 w-5`})})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto p-4`,children:m.isLoading?(0,G.jsxs)(`div`,{className:`flex items-center justify-center gap-2 py-12 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`h-5 w-5 animate-spin`}),i(`archives.media.searching`)]}):m.isError?(0,G.jsx)(`p`,{className:`py-8 text-center text-red-500`,children:i(`archives.media.searchFailed`)}):b?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[m.data?.local_timelapse&&(0,G.jsxs)(`div`,{className:`flex items-center gap-3 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark p-3`,children:[(0,G.jsx)(pc,{className:`h-5 w-5 shrink-0 text-bambu-green`}),(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`p`,{className:`truncate text-sm font-medium text-white`,children:m.data.local_timelapse.name}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[i(`archives.media.attachedTimelapse`),` · `,Ud(m.data.local_timelapse.size)]})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:_,children:[(0,G.jsx)(Ys,{className:`h-4 w-4`}),i(`common.download`)]})]}),h.length>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`mb-2 flex items-center justify-between gap-2`,children:[(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[i(`archives.media.printerFiles`),` (`,h.length,`)`]}),(0,G.jsx)(`button`,{className:`text-xs text-bambu-green hover:text-bambu-green-light`,onClick:()=>s(o.size===h.length?new Set:new Set(h.map(e=>e.path))),children:o.size===h.length?i(`common.deselectAll`):i(`common.selectAll`)})]}),(0,G.jsx)(`div`,{className:`space-y-1`,children:h.map(e=>{let t=o.has(e.path);return(0,G.jsxs)(`button`,{className:`flex w-full items-center gap-3 rounded-lg border p-3 text-left transition-colors ${t?`border-bambu-green/60 bg-bambu-green/10`:`border-bambu-dark-tertiary bg-bambu-dark hover:border-bambu-gray`}`,onClick:()=>g(e.path),children:[t?(0,G.jsx)(_u,{className:`h-5 w-5 shrink-0 text-bambu-green`}):(0,G.jsx)(yu,{className:`h-5 w-5 shrink-0 text-bambu-gray`}),e.kind===`timelapse`?(0,G.jsx)(pc,{className:`h-5 w-5 shrink-0 text-bambu-green`}):(0,G.jsx)(Wu,{className:`h-5 w-5 shrink-0 text-blue-400`}),(0,G.jsx)(`span`,{className:`min-w-0 flex-1 truncate text-sm text-white`,children:e.name}),(0,G.jsx)(`span`,{className:`shrink-0 text-xs text-bambu-gray`,children:Ud(e.size)})]},e.path)})})]}),S]}):(0,G.jsxs)(`div`,{className:`space-y-3 py-8 text-center`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:i(`archives.media.none`)}),S]})}),h.length>0&&(0,G.jsx)(`div`,{className:`flex items-center justify-end border-t border-bambu-dark-tertiary p-4`,children:(0,G.jsxs)(Q,{variant:`primary`,onClick:v,disabled:o.size===0||c,children:[c?(0,G.jsx)(Y,{className:`h-4 w-4 animate-spin`}):(0,G.jsx)(Ys,{className:`h-4 w-4`}),u?`${u.current}/${u.total}`:`${i(`archives.media.downloadSelected`)} (${o.size})`]})})]})})}function SBe({archiveIds:e,onClose:t}){(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&t()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[t]);let{data:n,isLoading:r,error:i}=K({queryKey:[`archive-comparison`,e],queryFn:()=>Z.compareArchives(e)});return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/80 flex items-center justify-center z-50 p-4`,onClick:t,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg max-w-4xl w-full max-h-[90vh] flex flex-col border border-bambu-dark-tertiary`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`h3`,{className:`text-lg font-semibold text-white`,children:[`Compare Archives (`,e.length,`)`]}),(0,G.jsx)(`button`,{onClick:t,className:`text-bambu-gray hover:text-white p-1`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-auto p-4 bg-bambu-dark-secondary`,children:r?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-12`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):i?(0,G.jsxs)(`div`,{className:`text-center py-12 text-red-700 dark:text-red-400`,children:[(0,G.jsx)(Iu,{className:`w-12 h-12 mx-auto mb-4 opacity-50`}),(0,G.jsx)(`p`,{children:`Failed to load comparison`}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-2`,children:i instanceof Error?i.message:`Unknown error`})]}):n?(0,G.jsx)(CBe,{comparison:n}):null}),(0,G.jsx)(`div`,{className:`p-4 border-t border-bambu-dark-tertiary`,children:(0,G.jsx)(Q,{variant:`secondary`,onClick:t,className:`w-full`,children:`Close`})})]})})}function CBe({comparison:e}){return(0,G.jsxs)(`div`,{className:`space-y-6`,children:[(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{children:[(0,G.jsx)(`th`,{className:`text-left text-sm text-bambu-gray font-medium pb-2 pr-4 min-w-[150px]`,children:`Setting`}),e.archives.map(e=>(0,G.jsxs)(`th`,{className:`text-left text-sm font-medium pb-2 px-2 min-w-[120px]`,children:[(0,G.jsx)(`div`,{className:`text-white truncate max-w-[150px]`,title:e.print_name,children:e.print_name}),(0,G.jsx)(`div`,{className:`text-xs ${e.status===`completed`?`text-status-ok`:e.status===`failed`?`text-status-error`:`text-bambu-gray`}`,children:e.status})]},e.id))]})}),(0,G.jsx)(`tbody`,{className:`divide-y divide-bambu-gray/20`,children:e.comparison.map(e=>(0,G.jsxs)(`tr`,{className:e.has_difference?`bg-yellow-500/5`:``,children:[(0,G.jsx)(`td`,{className:`py-2 pr-4 text-sm`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[e.has_difference&&(0,G.jsx)(Iu,{className:`w-3 h-3 text-yellow-600 dark:text-yellow-400 flex-shrink-0`}),(0,G.jsx)(`span`,{className:e.has_difference?`text-yellow-700 dark:text-yellow-400`:`text-bambu-gray`,children:e.label})]})}),e.values.map((t,n)=>(0,G.jsxs)(`td`,{className:`py-2 px-2 text-sm text-white`,children:[t??(0,G.jsx)(`span`,{className:`text-bambu-gray/50`,children:`-`}),e.unit&&t!==null&&(0,G.jsx)(`span`,{className:`text-bambu-gray ml-1`,children:e.unit})]},n))]},e.field))})]})}),e.differences.length>0&&(0,G.jsxs)(`div`,{className:`p-4 bg-yellow-50 border border-yellow-300 dark:bg-yellow-500/10 dark:border-yellow-500/30 rounded-lg`,children:[(0,G.jsxs)(`h4`,{className:`text-sm font-medium text-yellow-700 dark:text-yellow-400 mb-2 flex items-center gap-2`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4`}),e.differences.length,` Difference`,e.differences.length>1?`s`:``,` Found`]}),(0,G.jsxs)(`ul`,{className:`text-sm text-white/80 space-y-1`,children:[e.differences.slice(0,5).map(e=>(0,G.jsxs)(`li`,{children:[(0,G.jsx)(`span`,{className:`text-yellow-700 dark:text-yellow-400`,children:e.label}),`: `,e.values.join(` vs `),` `,e.unit||``]},e.field)),e.differences.length>5&&(0,G.jsxs)(`li`,{className:`text-bambu-gray`,children:[`...and `,e.differences.length-5,` more`]})]})]}),e.success_correlation.has_both_outcomes?(0,G.jsxs)(`div`,{className:`p-4 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`h4`,{className:`text-sm font-medium text-white mb-3 flex items-center gap-2`,children:[(0,G.jsx)(fs,{className:`w-4 h-4 text-bambu-green`}),`Success/Failure Analysis`]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-4 text-sm mb-3`,children:[(0,G.jsxs)(`span`,{className:`text-bambu-green`,children:[e.success_correlation.successful_count,` successful`]}),(0,G.jsxs)(`span`,{className:`text-red-700 dark:text-red-400`,children:[e.success_correlation.failed_count,` failed`]})]}),e.success_correlation.insights&&e.success_correlation.insights.length>0?(0,G.jsx)(`div`,{className:`space-y-2`,children:e.success_correlation.insights.map(e=>(0,G.jsxs)(`div`,{className:`text-sm p-2 bg-bambu-dark-secondary rounded`,children:[(0,G.jsxs)(`span`,{className:`text-white font-medium`,children:[e.label,`:`]}),` `,(0,G.jsx)(`span`,{className:`text-white/80`,children:e.insight})]},e.field))}):(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:`No clear correlations found between settings and outcomes.`})]}):(0,G.jsx)(`div`,{className:`p-4 bg-bambu-dark rounded-lg text-sm text-bambu-gray`,children:(0,G.jsx)(`p`,{children:e.success_correlation.message||`Need both successful and failed prints for correlation analysis.`})})]})}function wBe(e){let t=new Date(e),n=new Date().getTime()-t.getTime(),r=Math.floor(n/6e4);if(r<1)return`Just now`;if(r<60)return`${r}m ago`;let i=Math.floor(r/60);return i<24?`${i}h ago`:`${Math.floor(i/24)}d ago`}function TBe({upload:e,projects:t,onArchive:n,onDiscard:r,isArchiving:i,isDiscarding:a}){let[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(e.tags||``),[u,d]=(0,y.useState)(e.notes||``),[f,p]=(0,y.useState)(e.project_id),[m,h]=(0,y.useState)(!1);return(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`py-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(oc,{className:`w-8 h-8 text-bambu-green flex-shrink-0`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,title:e.filename,children:e.display_name||e.filename}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-xs text-bambu-gray`,children:[(0,G.jsx)(`span`,{children:Ud(e.file_size)}),(0,G.jsx)(`span`,{children:`·`}),(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(js,{className:`w-3 h-3`}),wBe(e.uploaded_at)]}),e.source_ip&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{children:`·`}),(0,G.jsxs)(`span`,{children:[`from `,e.source_ip]})]})]})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`button`,{onClick:()=>s(!o),className:`p-1 text-bambu-gray hover:text-white transition-colors`,children:o?(0,G.jsx)(gs,{className:`w-5 h-5`}):(0,G.jsx)(ps,{className:`w-5 h-5`})}),(0,G.jsx)(Q,{variant:`primary`,size:`sm`,onClick:()=>n(e.id,{tags:c,notes:u,project_id:f||void 0}),disabled:i,children:i?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Po,{className:`w-4 h-4`}),`Archive`]})}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>h(!0),disabled:a,children:a?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Nu,{className:`w-4 h-4 text-red-600 dark:text-red-400`})})]})]}),m&&(0,G.jsx)(rf,{title:`Discard Upload`,message:`Are you sure you want to discard "${e.filename}"? This cannot be undone.`,confirmText:`Discard`,variant:`danger`,onConfirm:()=>{r(e.id),h(!1)},onCancel:()=>h(!1)}),o&&(0,G.jsxs)(`div`,{className:`mt-4 pt-4 border-t border-bambu-dark-tertiary space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:`Tags`}),(0,G.jsx)(`input`,{type:`text`,value:c,onChange:e=>l(e.target.value),placeholder:`e.g., functional, prototype, gift`,className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-2 text-white placeholder-bambu-gray text-sm`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:`Notes`}),(0,G.jsx)(`textarea`,{value:u,onChange:e=>d(e.target.value),placeholder:`Add notes about this print...`,rows:2,className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-2 text-white placeholder-bambu-gray text-sm resize-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:`Project`}),(0,G.jsxs)(`select`,{value:f||``,onChange:e=>p(e.target.value?Number(e.target.value):null),className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-2 text-white text-sm`,children:[(0,G.jsx)(`option`,{value:``,children:`No project`}),t.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]})]})]})})}function EBe(){let e=co(),{showToast:t}=Gd(),[n,r]=(0,y.useState)(!1),[i,a]=(0,y.useState)(!1),[o,s]=(0,y.useState)(new Set),[c,l]=(0,y.useState)(new Set),{data:u,isLoading:d}=K({queryKey:[`pending-uploads`],queryFn:wd.list,refetchInterval:1e4}),{data:f}=K({queryKey:[`projects`],queryFn:()=>Z.getProjects(),select:e=>$G([...e].sort((e,t)=>e.name.localeCompare(t.name)))}),p=q({mutationFn:({id:e,data:t})=>wd.archive(e,t),onMutate:({id:e})=>{s(t=>new Set(t).add(e))},onSettled:(e,t,{id:n})=>{s(e=>{let t=new Set(e);return t.delete(n),t})},onSuccess:n=>{e.invalidateQueries({queryKey:[`pending-uploads`]}),e.invalidateQueries({queryKey:[`archives`]}),t(`Archived: ${n.print_name}`)},onError:e=>{t(e.message||`Failed to archive`,`error`)}}),m=q({mutationFn:e=>wd.discard(e),onMutate:e=>{l(t=>new Set(t).add(e))},onSettled:(e,t,n)=>{l(e=>{let t=new Set(e);return t.delete(n),t})},onSuccess:()=>{e.invalidateQueries({queryKey:[`pending-uploads`]}),t(`Upload discarded`)},onError:e=>{t(e.message||`Failed to discard`,`error`)}}),h=q({mutationFn:wd.archiveAll,onSuccess:n=>{e.invalidateQueries({queryKey:[`pending-uploads`]}),e.invalidateQueries({queryKey:[`archives`]}),t(`Archived ${n.archived} files${n.failed>0?`, ${n.failed} failed`:``}`)},onError:e=>{t(e.message||`Failed to archive all`,`error`)}}),g=q({mutationFn:wd.discardAll,onSuccess:n=>{e.invalidateQueries({queryKey:[`pending-uploads`]}),t(`Discarded ${n.discarded} files`)},onError:e=>{t(e.message||`Failed to discard all`,`error`)}});return d?(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-8 flex justify-center`,children:(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin text-bambu-green`})})}):!u||u.length===0?null:(0,G.jsxs)(`div`,{className:`mb-6`,children:[(0,G.jsxs)(Ld,{className:`border-l-4 border-l-yellow-500`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Bu,{className:`w-5 h-5 text-yellow-500`}),(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white`,children:[`Pending Uploads (`,u.length,`)`]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Q,{variant:`primary`,size:`sm`,onClick:()=>r(!0),disabled:h.isPending,children:h.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Po,{className:`w-4 h-4`}),`Archive All`]})}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>a(!0),disabled:g.isPending,children:g.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),`Discard All`]})})]})]})}),(0,G.jsxs)(zd,{children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4`,children:`These files were uploaded via the virtual printer. Review and archive them to add to your collection.`}),(0,G.jsx)(`div`,{className:`space-y-3`,children:u.map(e=>(0,G.jsx)(TBe,{upload:e,projects:f||[],onArchive:(e,t)=>p.mutate({id:e,data:t}),onDiscard:e=>m.mutate(e),isArchiving:o.has(e.id),isDiscarding:c.has(e.id)},e.id))})]})]}),n&&(0,G.jsx)(rf,{title:`Archive All Uploads`,message:`Are you sure you want to archive all ${u.length} pending uploads?`,confirmText:`Archive All`,onConfirm:()=>{h.mutate(),r(!1)},onCancel:()=>r(!1)}),i&&(0,G.jsx)(rf,{title:`Discard All Uploads`,message:`Are you sure you want to discard all ${u.length} pending uploads? This cannot be undone.`,confirmText:`Discard All`,variant:`danger`,onConfirm:()=>{g.mutate(),a(!1)},onCancel:()=>a(!1)})]})}function DBe({onClose:e}){let t=co(),{showToast:n}=Gd(),[r,i]=(0,y.useState)(``),[a,o]=(0,y.useState)(null),[s,c]=(0,y.useState)(``),[l,u]=(0,y.useState)(null),[d,f]=(0,y.useState)(`count`);(0,y.useEffect)(()=>{let t=t=>{t.key===`Escape`&&(a?o(null):l?u(null):e())};return window.addEventListener(`keydown`,t),()=>window.removeEventListener(`keydown`,t)},[e,a,l]);let{data:p,isLoading:m}=K({queryKey:[`tags`],queryFn:Z.getTags}),h=q({mutationFn:({oldName:e,newName:t})=>Z.renameTag(e,t),onSuccess:(e,{oldName:r,newName:i})=>{t.invalidateQueries({queryKey:[`tags`]}),t.invalidateQueries({queryKey:[`archives`]}),n(`Renamed "${r}" to "${i}" in ${e.affected} archive${e.affected===1?``:`s`}`),o(null)},onError:e=>{n(e.message||`Failed to rename tag`,`error`)}}),g=q({mutationFn:e=>Z.deleteTag(e),onSuccess:(e,r)=>{t.invalidateQueries({queryKey:[`tags`]}),t.invalidateQueries({queryKey:[`archives`]}),n(`Deleted "${r}" from ${e.affected} archive${e.affected===1?``:`s`}`),u(null)},onError:e=>{n(e.message||`Failed to delete tag`,`error`)}}),_=e=>{o(e.name),c(e.name),u(null)},v=()=>{o(null),c(``)},b=()=>{if(!a||!s.trim())return;let e=s.trim();if(e===a){v();return}h.mutate({oldName:a,newName:e})},x=e=>{e.key===`Enter`?(e.preventDefault(),b()):e.key===`Escape`&&(e.preventDefault(),v())},S=e=>{u(e),o(null)},C=()=>{l&&g.mutate(l)},w=p?.filter(e=>e.name.toLowerCase().includes(r.toLowerCase())).sort((e,t)=>d===`count`&&t.count-e.count||e.name.localeCompare(t.name)),T=p?.reduce((e,t)=>e+t.count,0)||0;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,children:(0,G.jsx)(Ld,{className:`w-full max-w-lg max-h-[80vh] flex flex-col`,children:(0,G.jsxs)(zd,{className:`p-0 flex flex-col min-h-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary flex-shrink-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Tu,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-xl font-semibold text-white`,children:`Manage Tags`})]}),(0,G.jsx)(`button`,{onClick:e,className:`text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary flex-shrink-0`,children:[(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,placeholder:`Search tags...`,className:`w-full pl-9 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,value:r,onChange:e=>i(e.target.value)})]}),(0,G.jsxs)(`select`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,value:d,onChange:e=>f(e.target.value),children:[(0,G.jsx)(`option`,{value:`count`,children:`Sort by Count`}),(0,G.jsx)(`option`,{value:`name`,children:`Sort by Name`})]})]}),p&&(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-2`,children:[p.length,` tag`,p.length===1?``:`s`,` across `,T,` usage`,T===1?``:`s`]})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto min-h-0 p-4`,children:m?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin text-bambu-gray`})}):w?.length?(0,G.jsx)(`div`,{className:`space-y-2`,children:w.map(e=>(0,G.jsx)(`div`,{className:`flex items-center gap-2 p-2 rounded-lg bg-bambu-dark hover:bg-bambu-dark-tertiary transition-colors group`,children:a===e.name?(0,G.jsxs)(`div`,{className:`flex-1 flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`text`,className:`flex-1 px-2 py-1 bg-bambu-dark-tertiary border border-bambu-green rounded text-white text-sm focus:outline-none`,value:s,onChange:e=>c(e.target.value),onKeyDown:x,autoFocus:!0}),(0,G.jsx)(Q,{size:`sm`,variant:`primary`,onClick:b,disabled:!s.trim()||h.isPending,className:`p-1.5`,children:h.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(fs,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{size:`sm`,variant:`ghost`,onClick:v,className:`p-1.5`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}):l===e.name?(0,G.jsxs)(`div`,{className:`flex-1 flex items-center gap-2`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-600 dark:text-yellow-400 flex-shrink-0`}),(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray-light flex-1`,children:[`Delete "`,e.name,`" from `,e.count,` archive`,e.count===1?``:`s`,`?`]}),(0,G.jsx)(Q,{size:`sm`,variant:`danger`,onClick:C,disabled:g.isPending,className:`p-1.5`,children:g.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Nu,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{size:`sm`,variant:`ghost`,onClick:()=>u(null),className:`p-1.5`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Tu,{className:`w-4 h-4 text-bambu-gray flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-white flex-1 truncate`,children:e.name}),(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded-full bg-bambu-dark-tertiary text-bambu-gray text-xs`,children:e.count}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 can-hover:opacity-0 group-hover:opacity-100 group-focus-within:opacity-100 transition-opacity`,children:[(0,G.jsx)(`button`,{onClick:()=>_(e),className:`p-1.5 rounded hover:bg-bambu-dark text-bambu-gray hover:text-white transition-colors`,title:`Rename tag`,children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>S(e.name),className:`p-1.5 rounded hover:bg-bambu-dark text-bambu-gray hover:text-red-700 dark:hover:text-red-400 transition-colors`,title:`Delete tag`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})]})},e.name))}):(0,G.jsx)(`div`,{className:`text-center py-8 text-bambu-gray`,children:r?`No tags match your search`:`No tags found`})}),(0,G.jsx)(`div`,{className:`flex gap-3 p-4 border-t border-bambu-dark-tertiary flex-shrink-0`,children:(0,G.jsx)(Q,{variant:`secondary`,onClick:e,className:`flex-1`,children:`Close`})})]})})})}var J4=`bambuddy-printlog-columns`,Y4={date:`archives.log.date`,print_name:`archives.log.printName`,printer:`archives.log.printer`,user:`archives.log.user`,status:`archives.log.status`,duration:`archives.log.duration`,completed_at:`archives.log.completedAt`,filament:`archives.log.filament`,filament_used:`archives.log.filamentUsed`,cost:`archives.log.cost`,energy:`archives.log.energy`,energy_cost:`archives.log.energyCost`},X4=[{id:`date`,visible:!0},{id:`print_name`,visible:!0},{id:`printer`,visible:!0},{id:`user`,visible:!0},{id:`status`,visible:!0},{id:`duration`,visible:!0},{id:`filament`,visible:!0},{id:`filament_used`,visible:!0},{id:`completed_at`,visible:!1},{id:`cost`,visible:!1},{id:`energy`,visible:!1},{id:`energy_cost`,visible:!1}];function OBe(){try{let e=localStorage.getItem(J4);if(e){let t=JSON.parse(e),n=new Set(Object.keys(Y4)),r=new Set(t.map(e=>e.id)),i=t.filter(e=>n.has(e.id)).map(e=>({id:e.id,visible:!!e.visible})),a=X4.filter(e=>!r.has(e.id));if(i.length>0)return[...i,...a]}}catch{}return X4.map(e=>({...e}))}var Z4=`bambuddy-printlog-sort`,Q4=new Set(Object.keys(Y4)),kBe={column:`date`,direction:`desc`};function ABe(){try{let e=localStorage.getItem(Z4);if(e){let t=JSON.parse(e);if(Q4.has(t?.column)&&(t.direction===`asc`||t.direction===`desc`))return t}}catch{}return{...kBe}}function jBe(e){try{localStorage.setItem(Z4,JSON.stringify(e))}catch{}}function MBe(e){try{localStorage.setItem(J4,JSON.stringify(e.map(e=>({id:e.id,visible:e.visible}))))}catch{}}function $4(e){let t=e.filename;if(t){let e=t.toLowerCase();if(e.endsWith(`.gcode`)||e.includes(`.gcode.`))return!0}return!!(e.total_layers||e.print_time_seconds)}async function e3(e,t,n,r){try{if(n===`source`){let{token:n}=await Z.createSourceSlicerToken(e),i=Z.getSourceSlicerDownloadUrl(e,n,t);ZG(`${window.location.origin}${i}`,r)}else{let{token:n}=await Z.createArchiveSlicerToken(e),i=Z.getArchiveSlicerDownloadUrl(e,n,t);ZG(`${window.location.origin}${i}`,r)}}catch{let i=n===`source`?Z.getSource3mfForSlicer(e,t):Z.getArchiveForSlicer(e,t);ZG(`${window.location.origin}${i}`,r)}}function NBe({archive:e,printerName:t,printerMap:n,isSelected:r,onSelect:i,selectionMode:a,projects:o,isHighlighted:s,timeFormat:c=`system`,preferredSlicer:l=`bambu_studio`,useSlicerApi:u=!1,currency:d,t:f,onNavigateToArchive:p}){s&&console.log(`ArchiveCard isHighlighted=true for archive:`,e.id);let m=co(),{showToast:h}=Gd(),{hasPermission:g,canModify:_}=jd(),v=or(),b=(0,y.useMemo)(()=>{let t=e.extra_data?.slicer_ams_mapping;if(!(!t||!Array.isArray(t.mapping)||t.printer_id==null))return n.get(t.printer_id)},[e.extra_data,n]),[x,S]=(0,y.useState)(!1),[C,w]=(0,y.useState)(!1),[T,E]=(0,y.useState)(!1),[D,O]=(0,y.useState)(!1),[k,A]=(0,y.useState)(!1),j=K({queryKey:[`archive`,e.id,`delete-impact`],queryFn:()=>Z.getArchiveDeleteImpact(e.id),enabled:D,staleTime:0}),[M,N]=(0,y.useState)(!1),[P,F]=(0,y.useState)(!1),[I,L]=(0,y.useState)(!1),[R,z]=(0,y.useState)(!1),[B,V]=(0,y.useState)(!1),[ee,te]=(0,y.useState)([]),[ne,re]=(0,y.useState)(!1),[ie,ae]=(0,y.useState)(!1),[oe,se]=(0,y.useState)(!1),[H,ce]=(0,y.useState)(!1),[le,ue]=(0,y.useState)(!1),[de,fe]=(0,y.useState)(!1),[pe,me]=(0,y.useState)(null),[he,ge]=(0,y.useState)(null),[_e,ve]=(0,y.useState)(!1),[ye,be]=(0,y.useState)(null),xe=(0,y.useRef)(null),Se=(0,y.useRef)(null),Ce=(0,y.useRef)(null),{data:we}=K({queryKey:[`archive-plates`,e.id],queryFn:()=>Z.getArchivePlates(e.id),enabled:_e,staleTime:300*1e3}),Te=e.duplicate_sequence??0,Ee=e.original_archive_id??null,De=we?.plates??[],Oe=we?.is_multi_plate??!1,ke=he??0,Ae=async()=>{try{let t=await Z.getArchivePlates(e.id);if(t.has_gcode===!1){h(f(`archives.platePicker.noGcode`),`info`);return}if(t.is_multi_plate&&t.plates.length>1){be(t.plates);return}}catch{}v(`/gcode-viewer?archive=${e.id}`)},je=q({mutationFn:()=>Z.deleteArchiveTimelapse(e.id),onSuccess:()=>{m.invalidateQueries({queryKey:[`archives`]}),h(f(`archives.toast.timelapseRemoved`))},onError:e=>{h(e.message||f(`archives.toast.failedRemoveTimelapse`),`error`)}}),Me=q({mutationFn:t=>Z.uploadArchiveTimelapse(e.id,t),onSuccess:e=>{m.invalidateQueries({queryKey:[`archives`]}),h(f(`archives.toast.timelapseUploaded`,{filename:e.filename}))},onError:e=>{h(e.message||f(`archives.toast.failedUploadTimelapse`),`error`)}}),Ne=q({mutationFn:t=>Z.uploadSource3mf(e.id,t),onSuccess:e=>{m.invalidateQueries({queryKey:[`archives`]}),h(f(`archives.toast.source3mfAttached`,{filename:e.filename}))},onError:e=>{h(e.message||f(`archives.toast.failedUploadSource3mf`),`error`)}}),Pe=q({mutationFn:()=>Z.deleteSource3mf(e.id),onSuccess:()=>{m.invalidateQueries({queryKey:[`archives`]}),h(f(`archives.toast.source3mfRemoved`))},onError:e=>{h(e.message||f(`archives.toast.failedRemoveSource3mf`),`error`)}}),Fe=q({mutationFn:t=>Z.uploadF3d(e.id,t),onSuccess:e=>{m.invalidateQueries({queryKey:[`archives`]}),h(f(`archives.toast.f3dAttached`,{filename:e.filename}))},onError:e=>{h(e.message||f(`archives.toast.failedUploadF3d`),`error`)}}),Ie=q({mutationFn:()=>Z.deleteF3d(e.id),onSuccess:()=>{m.invalidateQueries({queryKey:[`archives`]}),h(f(`archives.toast.f3dRemoved`))},onError:e=>{h(e.message||f(`archives.toast.failedRemoveF3d`),`error`)}}),Le=q({mutationFn:()=>Z.scanArchiveTimelapse(e.id),onSuccess:e=>{e.status===`attached`?(m.invalidateQueries({queryKey:[`archives`]}),h(f(`archives.toast.timelapseAttached`,{filename:e.filename}))):e.status===`exists`?h(f(`archives.toast.timelapseAlreadyAttached`)):e.status===`not_found`&&e.available_files&&e.available_files.length>0?(te(e.available_files),V(!0)):h(e.message||f(`archives.toast.noMatchingTimelapse`),`warning`)},onError:e=>{h(e.message||f(`archives.toast.failedScanTimelapse`),`error`)}}),Re=q({mutationFn:t=>Z.selectArchiveTimelapse(e.id,t),onSuccess:e=>{m.invalidateQueries({queryKey:[`archives`]}),h(f(`archives.toast.timelapseAttached`,{filename:e.filename})),V(!1),te([])},onError:e=>{h(e.message||f(`archives.toast.failedAttachTimelapse`),`error`)}}),ze=q({mutationFn:t=>Z.deleteArchive(e.id,t),onSuccess:()=>{QG(m),h(f(`archives.toast.archiveDeleted`))},onError:()=>{h(f(`archives.toast.failedDeleteArchive`),`error`)}}),Be=q({mutationFn:()=>Z.toggleFavorite(e.id),onSuccess:e=>{m.invalidateQueries({queryKey:[`archives`]}),h(e.is_favorite?f(`archives.toast.addedToFavorites`):f(`archives.toast.removedFromFavorites`))}}),{data:Ve}=K({queryKey:[`archive-folders`,e.id],queryFn:()=>Z.getLibraryFoldersByArchive(e.id)}),He=q({mutationFn:t=>Z.updateArchive(e.id,{project_id:t}),onSuccess:()=>{QG(m),h(f(`archives.toast.projectUpdated`))},onError:()=>{h(f(`archives.toast.failedUpdateProject`),`error`)}}),Ue=e=>{e.preventDefault(),me({x:e.clientX,y:e.clientY})},We=[...$4(e)?[{label:f(`common.print`),icon:(0,G.jsx)(Ll,{className:`w-4 h-4`}),onClick:()=>S(!0),disabled:!e.file_path||!g(`queue:create`)||!_(`archives`,`reprint`,e.created_by_id),title:e.file_path?g(`queue:create`)?_(`archives`,`reprint`,e.created_by_id)?void 0:f(`archives.permission.noReprint`):f(`archives.permission.noAddToQueue`):f(`archives.card.noFileForReprint`)},{label:f(`archives.menu.openInBambuStudio`),icon:(0,G.jsx)(nc,{className:`w-4 h-4`}),onClick:()=>{let t=e.print_name||e.filename||`model`;e3(e.id,t,`file`,l)},disabled:!e.file_path,title:e.file_path?void 0:f(`archives.card.noFileForReprint`)}]:[{label:f(`archives.menu.slice`),icon:u?(0,G.jsx)(Rs,{className:`w-4 h-4`}):(0,G.jsx)(nc,{className:`w-4 h-4`}),onClick:()=>{if(u)w(!0);else{let t=e.print_name||e.filename||`model`;e3(e.id,t,`file`,l)}}},...u?[{label:f(`library.runWithPipeline.actionLabel`),icon:(0,G.jsx)(Ml,{className:`w-4 h-4`}),onClick:()=>E(!0),disabled:!g(`pipelines:run`),title:g(`pipelines:run`)?void 0:f(`library.runWithPipeline.noPermission`)}]:[]],{label:e.external_url?f(`archives.menu.externalLink`):f(`archives.menu.viewOnMakerWorld`),icon:(0,G.jsx)(kc,{className:`w-4 h-4`}),onClick:()=>{let t=e.external_url||e.makerworld_url;t&&window.open(t,`_blank`)},disabled:!e.external_url&&!e.makerworld_url},{label:``,divider:!0,onClick:()=>{}},{label:f(`archives.menu.preview3d`),icon:(0,G.jsx)(Zo,{className:`w-4 h-4`}),onClick:()=>{Ae()}},{label:f(`archives.menu.viewTimelapse`),icon:(0,G.jsx)(pc,{className:`w-4 h-4`}),onClick:()=>L(!0),disabled:!e.timelapse_path},{label:f(`archives.media.download`),icon:(0,G.jsx)(lc,{className:`w-4 h-4`}),onClick:()=>z(!0),disabled:!e.timelapse_path&&(!g(`printers:files`)||!e.printer_id||!e.started_at),title:!e.timelapse_path&&!g(`printers:files`)?f(`printers.permission.noFiles`):void 0},{label:f(`archives.menu.scanForTimelapse`),icon:(0,G.jsx)(Yl,{className:`w-4 h-4`}),onClick:()=>Le.mutate(),disabled:!e.printer_id||!!e.timelapse_path||Le.isPending||!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?void 0:f(`archives.permission.noUpdateArchives`)},{label:f(`archives.menu.uploadTimelapse`),icon:(0,G.jsx)(Bu,{className:`w-4 h-4`}),onClick:()=>Ce.current?.click(),disabled:!!e.timelapse_path||!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?void 0:f(`archives.permission.noUpdateArchives`)},...e.timelapse_path?[{label:f(`archives.menu.removeTimelapse`),icon:(0,G.jsx)(Nu,{className:`w-4 h-4`}),onClick:()=>fe(!0),danger:!0,disabled:!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?void 0:f(`archives.permission.noUpdateArchives`)}]:[],{label:``,divider:!0,onClick:()=>{}},{label:e.source_3mf_path?f(`archives.menu.downloadSource3mf`):f(`archives.menu.uploadSource3mf`),icon:(0,G.jsx)(sc,{className:`w-4 h-4`}),onClick:()=>{e.source_3mf_path?Z.downloadSource3mf(e.id).catch(e=>{console.error(`Source 3MF download failed:`,e)}):xe.current?.click()},disabled:!e.source_3mf_path&&!_(`archives`,`update`,e.created_by_id),title:!e.source_3mf_path&&!_(`archives`,`update`,e.created_by_id)?f(`archives.permission.noUploadFiles`):void 0},...e.source_3mf_path?[{label:f(`archives.menu.replaceSource3mf`),icon:(0,G.jsx)(Bu,{className:`w-4 h-4`}),onClick:()=>xe.current?.click(),disabled:!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?void 0:f(`archives.permission.noUpdateArchives`)},{label:f(`archives.menu.removeSource3mf`),icon:(0,G.jsx)(Nu,{className:`w-4 h-4`}),onClick:()=>ce(!0),danger:!0,disabled:!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?void 0:f(`archives.permission.noUpdateArchives`)}]:[],{label:e.f3d_path?f(`archives.menu.replaceF3d`):f(`archives.menu.uploadF3d`),icon:(0,G.jsx)(Zo,{className:`w-4 h-4`}),onClick:()=>Se.current?.click(),disabled:!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?void 0:f(`archives.permission.noUpdateArchives`)},...e.f3d_path?[{label:f(`archives.menu.downloadF3d`),icon:(0,G.jsx)(Ys,{className:`w-4 h-4`}),onClick:()=>{Z.downloadF3d(e.id).catch(e=>{console.error(`F3D download failed:`,e)})}},{label:f(`archives.menu.removeF3d`),icon:(0,G.jsx)(Nu,{className:`w-4 h-4`}),onClick:()=>ue(!0),danger:!0,disabled:!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?void 0:f(`archives.permission.noUpdateArchives`)}]:[],{label:``,divider:!0,onClick:()=>{}},{label:f(`archives.menu.download`),icon:(0,G.jsx)(Ys,{className:`w-4 h-4`}),onClick:()=>{Z.downloadArchive(e.id,`${e.print_name||e.filename}.3mf`).catch(e=>{console.error(`Archive download failed:`,e)})},disabled:!g(`archives:read`),title:g(`archives:read`)?void 0:f(`archives.permission.noDownload`)},{label:f(`archives.menu.copyDownloadLink`),icon:(0,G.jsx)(Vs,{className:`w-4 h-4`}),onClick:()=>{let t=`${window.location.origin}${Z.getArchiveDownload(e.id)}`;navigator.clipboard.writeText(t).then(()=>{h(f(`archives.toast.linkCopied`))}).catch(()=>{h(f(`archives.toast.failedCopyLink`),`error`)})},disabled:!g(`archives:read`),title:g(`archives:read`)?void 0:f(`archives.permission.noCopyLink`)},{label:f(`archives.menu.qrCode`),icon:(0,G.jsx)(Rl,{className:`w-4 h-4`}),onClick:()=>re(!0)},{label:e.photos?.length?f(`archives.menu.viewPhotosCount`,{count:e.photos.length}):f(`archives.menu.viewPhotos`),icon:(0,G.jsx)(ss,{className:`w-4 h-4`}),onClick:()=>ae(!0),disabled:!e.photos?.length},{label:f(`archives.menu.projectPage`),icon:(0,G.jsx)(dc,{className:`w-4 h-4`}),onClick:()=>se(!0)},{label:``,divider:!0,onClick:()=>{}},{label:e.is_favorite?f(`archives.menu.removeFromFavorites`):f(`archives.menu.addToFavorites`),icon:(0,G.jsx)(bu,{className:`w-4 h-4 ${e.is_favorite?`fill-yellow-400 text-yellow-400`:_(`archives`,`update`,e.created_by_id)?`group-hover:text-yellow-400`:``}`}),onClick:()=>Be.mutate(),disabled:!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?void 0:f(`archives.permission.noUpdateArchives`)},{label:f(`archives.menu.edit`),icon:(0,G.jsx)(kl,{className:`w-4 h-4`}),onClick:()=>N(!0),disabled:!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?void 0:f(`archives.permission.noUpdateArchives`)},{label:f(`archives.menu.printLog`),icon:(0,G.jsx)(Rc,{className:`w-4 h-4`}),onClick:()=>F(!0)},...e.project_id&&e.project_name?[{label:f(`archives.menu.goToProject`,{name:e.project_name}),icon:(0,G.jsx)(gc,{className:`w-4 h-4 text-bambu-green`}),onClick:()=>window.location.href=`/projects`}]:[],{label:f(`archives.menu.addToProject`),icon:(0,G.jsx)(gc,{className:`w-4 h-4`}),onClick:()=>{},disabled:!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?void 0:f(`archives.permission.noUpdateArchives`),submenuSearchPlaceholder:$G(o??[],e.project_id).length>5?f(`archives.menu.searchProjects`):void 0,submenu:(()=>{let t=[];if(e.project_id&&t.push({label:f(`archives.menu.removeFromProject`),icon:(0,G.jsx)(td,{className:`w-4 h-4`}),onClick:()=>He.mutate(null),disabled:!_(`archives`,`update`,e.created_by_id)}),!o)t.push({label:f(`archives.menu.loading`),icon:(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),onClick:()=>{},disabled:!0});else{let n=$G(o,e.project_id).sort((e,t)=>e.name.localeCompare(t.name));n.length===0?t.push({label:f(`archives.menu.noProjectsAvailable`),icon:(0,G.jsx)(gc,{className:`w-4 h-4 opacity-50`}),onClick:()=>{},disabled:!0}):n.forEach(n=>{t.push({label:n.name,icon:(0,G.jsx)(`div`,{className:`w-3 h-3 rounded-full flex-shrink-0`,style:{backgroundColor:n.color||`#888`}}),onClick:()=>He.mutate(n.id),disabled:e.project_id===n.id||!_(`archives`,`update`,e.created_by_id)})})}return t})()},{label:f(r?`archives.menu.deselect`:`archives.menu.select`),icon:r?(0,G.jsx)(_u,{className:`w-4 h-4`}):(0,G.jsx)(yu,{className:`w-4 h-4`}),onClick:()=>i(e.id)},{label:``,divider:!0,onClick:()=>{}},{label:f(`archives.menu.delete`),icon:(0,G.jsx)(Nu,{className:`w-4 h-4`}),onClick:()=>O(!0),danger:!0,disabled:!_(`archives`,`delete`,e.created_by_id),title:_(`archives`,`delete`,e.created_by_id)?void 0:f(`archives.permission.noDelete`)}];return(0,G.jsxs)(Ld,{"data-archive-id":e.id,className:`relative flex flex-col group ${r?`ring-2 ring-bambu-green`:``} ${a?`cursor-pointer`:``}`,style:s?{outline:`4px solid #facc15`,outlineOffset:`2px`}:void 0,onContextMenu:Ue,onClick:a?()=>i(e.id):void 0,children:[a&&(0,G.jsx)(`button`,{className:`absolute top-2 left-2 z-10 p-1 rounded bg-black/50 hover:bg-black/70 transition-colors`,onClick:t=>{t.stopPropagation(),i(e.id)},children:r?(0,G.jsx)(_u,{className:`w-5 h-5 text-bambu-green`}):(0,G.jsx)(yu,{className:`w-5 h-5 text-white`})}),(0,G.jsxs)(`div`,{className:`aspect-video bg-bambu-dark relative flex-shrink-0 overflow-hidden rounded-t-xl`,onMouseEnter:()=>ve(!0),onMouseLeave:()=>ve(!1),children:[e.thumbnail_path?(0,G.jsx)(`img`,{src:he!==null&&De.length>0?Z.getArchivePlateThumbnail(e.id,De[ke]?.index??0):Z.getArchiveThumbnail(e.id),alt:e.print_name||e.filename,className:`w-full h-full object-cover`}):(0,G.jsx)(`div`,{className:`w-full h-full flex items-center justify-center`,children:(0,G.jsx)(Vc,{className:`w-12 h-12 text-bambu-dark-tertiary`})}),Oe&&De.length>1&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`button`,{className:`absolute left-1 top-1/2 -translate-y-1/2 p-1 rounded-full bg-black/60 hover:bg-black/80 transition-all can-hover:opacity-0 group-hover:opacity-100 group-focus-within:opacity-100`,onClick:e=>{e.stopPropagation(),ge(e=>{let t=e??0;return t>0?t-1:De.length-1})},title:f(`archives.card.previousPlate`),children:(0,G.jsx)(hs,{className:`w-4 h-4 text-white`})}),(0,G.jsx)(`button`,{className:`absolute right-1 top-1/2 -translate-y-1/2 p-1 rounded-full bg-black/60 hover:bg-black/80 transition-all can-hover:opacity-0 group-hover:opacity-100 group-focus-within:opacity-100`,onClick:e=>{e.stopPropagation(),ge(e=>{let t=e??0;return t<De.length-1?t+1:0})},title:f(`archives.card.nextPlate`),children:(0,G.jsx)(ms,{className:`w-4 h-4 text-white`})}),(0,G.jsx)(`div`,{className:`absolute bottom-1 left-1/2 -translate-x-1/2 flex gap-1 px-2 py-1 rounded-full bg-black/50 transition-all can-hover:opacity-0 group-hover:opacity-100 group-focus-within:opacity-100`,children:De.map((e,t)=>(0,G.jsx)(`button`,{className:`w-2 h-2 rounded-full transition-colors ${t===ke?`bg-bambu-green`:`bg-white/50 hover:bg-white/80`}`,onClick:e=>{e.stopPropagation(),ge(t)},title:e.name||f(`archives.card.plateNumber`,{index:e.index})},e.index))})]}),(0,G.jsx)(`button`,{className:`absolute top-2 left-2 p-1.5 rounded bg-black/50 hover:bg-black/70 transition-all can-hover:opacity-0 group-hover:opacity-100 group-focus-within:opacity-100 ${a?`left-10`:``}`,onClick:e=>{e.stopPropagation();let t=e.currentTarget.getBoundingClientRect();me({x:t.left,y:t.bottom+4})},title:f(`archives.card.moreOptions`),children:(0,G.jsx)(Qs,{className:`w-5 h-5 text-white`})}),(0,G.jsx)(`button`,{className:`absolute top-2 right-2 p-1 rounded transition-colors ${_(`archives`,`update`,e.created_by_id)?`bg-black/50 hover:bg-black/70`:`bg-black/30 cursor-not-allowed`}`,onClick:t=>{t.stopPropagation(),_(`archives`,`update`,e.created_by_id)&&Be.mutate()},disabled:!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?e.is_favorite?f(`archives.card.removeFromFavorites`):f(`archives.card.addToFavorites`):f(`archives.permission.noUpdateArchives`),children:(0,G.jsx)(bu,{className:`w-5 h-5 ${e.is_favorite?`text-yellow-400 fill-yellow-400`:`text-white`} ${_(`archives`,`update`,e.created_by_id)?``:`opacity-50`}`})}),(e.status===`failed`||e.status===`aborted`)&&(0,G.jsx)(`div`,{className:`absolute top-2 left-12 px-2 py-1 rounded text-xs bg-status-error/80 text-white`,children:e.status===`aborted`?f(`archives.card.cancelled`):f(`archives.card.failed`)}),e.duplicate_count>0&&Te>0&&Ee&&(0,G.jsxs)(`button`,{onClick:e=>{e.stopPropagation(),p?.(Ee)},className:`absolute top-2 right-12 px-2 py-1 rounded text-xs bg-purple-500/80 hover:bg-purple-600/90 text-white flex items-center gap-1 transition-colors cursor-pointer`,title:f(`archives.viewOriginalPrint`,{id:Ee}),children:[(0,G.jsx)(Vs,{className:`w-3 h-3`}),`#`,Te]}),e.duplicate_count>0&&Te===0&&(0,G.jsxs)(`span`,{className:`absolute top-2 right-12 px-2 py-1 rounded text-xs bg-purple-500/80 text-white flex items-center gap-1`,title:`${e.duplicate_count} reprint${e.duplicate_count===1?``:`s`}`,children:[(0,G.jsx)(Ec,{className:`w-3 h-3`}),`+`,e.duplicate_count]}),e.source_3mf_path&&(0,G.jsx)(`button`,{className:`absolute bottom-2 left-2 p-1.5 rounded bg-black/60 hover:bg-black/80 transition-colors`,onClick:t=>{t.stopPropagation();let n=(e.print_name||e.filename||`source`).replace(/\.gcode\.3mf$/i,``)+`_source`;e3(e.id,n,`source`,l)},title:f(`archives.card.openSource3mf`),children:(0,G.jsx)(sc,{className:`w-4 h-4 text-orange-400`})}),e.f3d_path&&(0,G.jsx)(`button`,{className:`absolute bottom-2 ${e.source_3mf_path?`left-12`:`left-2`} p-1.5 rounded bg-black/60 hover:bg-black/80 transition-colors`,onClick:t=>{t.stopPropagation(),Z.downloadF3d(e.id).catch(e=>{console.error(`F3D download failed:`,e)})},title:f(`archives.card.downloadF3d`),children:(0,G.jsx)(Zo,{className:`w-4 h-4 text-cyan-400`})}),(0,G.jsx)(`button`,{className:`absolute bottom-2 right-2 p-1.5 rounded bg-black/60 hover:bg-black/80 transition-colors`,onClick:e=>{e.stopPropagation(),Ae()},title:f(`archives.card.preview3d`),children:(0,G.jsx)(qc,{className:`w-4 h-4 text-white`})}),e.timelapse_path&&(0,G.jsx)(`button`,{className:`absolute bottom-2 right-12 p-1.5 rounded bg-black/60 hover:bg-black/80 transition-colors`,onClick:e=>{e.stopPropagation(),L(!0)},title:f(`archives.card.viewTimelapse`),children:(0,G.jsx)(pc,{className:`w-4 h-4 text-bambu-green`})}),e.photos&&e.photos.length>0&&(0,G.jsxs)(`button`,{className:`absolute bottom-2 ${e.timelapse_path?`right-[5.5rem]`:`right-12`} p-1.5 rounded bg-black/60 hover:bg-black/80 transition-colors`,onClick:e=>{e.stopPropagation(),ae(!0)},title:e.photos.length===1?f(`archives.card.viewPhoto`):f(`archives.card.viewPhotos`,{count:e.photos.length}),children:[(0,G.jsx)(ss,{className:`w-4 h-4 text-blue-400`}),e.photos.length>1&&(0,G.jsx)(`span`,{className:`absolute -top-1 -right-1 w-4 h-4 bg-blue-500 rounded-full text-[10px] text-white flex items-center justify-center`,children:e.photos.length})]}),Ve&&Ve.length>0&&(0,G.jsx)(Ai,{to:`/files?folder=${Ve[0].id}`,className:`absolute bottom-2 p-1.5 rounded bg-black/60 hover:bg-black/80 transition-colors`,onClick:e=>e.stopPropagation(),title:f(`archives.card.openFolder`,{name:Ve[0].name}),style:{left:e.source_3mf_path?e.f3d_path?`5.5rem`:`3rem`:e.f3d_path?`3rem`:`0.5rem`},children:(0,G.jsx)(_c,{className:`w-4 h-4 text-yellow-400`})})]}),(0,G.jsxs)(zd,{className:`p-4 flex-1 flex flex-col`,children:[(0,G.jsxs)(`p`,{className:`text-[10px] text-bambu-gray/70 mb-1`,children:[`#`,e.id]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2 mb-1`,children:[(0,G.jsxs)(`h3`,{className:`min-w-0 font-medium text-white truncate`,children:[e.print_name||e.filename,e.plate_id!=null&&e.plate_id>1&&` — ${f(`printers.plateNumber`,{number:e.plate_id})}`]}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,className:`p-1 sm:p-1.5 shrink-0`,onClick:()=>N(!0),disabled:!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?f(`archives.card.edit`):f(`archives.card.noPermissionEdit`),children:(0,G.jsx)(kl,{className:`w-3 h-3 sm:w-4 sm:h-4`})})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3 flex-wrap`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:t}),(()=>{let t=kW(e.bed_type);return t?(0,G.jsx)(`img`,{src:t.icon,alt:t.label,title:t.label,className:`w-4 h-4 flex-shrink-0`}):null})(),(0,G.jsx)(`span`,{className:`text-[10px] px-1.5 py-0.5 rounded font-medium ${$4(e)?`bg-bambu-green/20 text-bambu-green`:`bg-orange-100 dark:bg-orange-500/20 text-orange-700 dark:text-orange-400`}`,title:$4(e)?f(`archives.card.slicedFile`):f(`archives.card.sourceFile`),children:$4(e)?f(`archives.card.gcode`):f(`archives.card.source`)}),e.content_hash&&(0,G.jsx)(`span`,{className:`text-[10px] px-1.5 py-0.5 rounded font-mono bg-bambu-dark-tertiary/50 text-bambu-gray-light opacity-0 transition-opacity duration-150 group-hover:opacity-100`,title:`SHA256: ${e.content_hash}`,children:e.content_hash.slice(0,8).toUpperCase()}),e.project_name&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded-full truncate max-w-[120px]`,style:{backgroundColor:`${o?.find(t=>t.id===e.project_id)?.color||`#6b7280`}20`,color:o?.find(t=>t.id===e.project_id)?.color||`#6b7280`},title:f(`archives.card.project`,{name:e.project_name}),children:e.project_name}),e.run_count>1&&(0,G.jsx)(`button`,{className:`text-[10px] px-1.5 py-0.5 rounded font-medium bg-bambu-orange/20 text-bambu-orange hover:bg-bambu-orange/30 transition-colors cursor-pointer`,onClick:e=>{e.stopPropagation(),F(!0)},title:f(`archives.card.runsBadgeTitle`,{count:e.run_count,successful:e.successful_run_count,failed:e.failed_run_count}),children:f(`archives.card.runsBadge`,{count:e.run_count})})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2 text-xs mb-4 min-h-[48px]`,children:[(e.print_time_seconds||e.actual_time_seconds)&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-bambu-gray`,title:e.time_accuracy?`Estimated: ${op(e.print_time_seconds||0)}\nActual: ${op(e.actual_time_seconds||0)}\nAccuracy: ${e.time_accuracy.toFixed(0)}%`:e.actual_time_seconds?`Actual: ${op(e.actual_time_seconds)}`:`Estimated: ${op(e.print_time_seconds||0)}`,children:[(0,G.jsx)(js,{className:`w-3 h-3`}),op(e.actual_time_seconds||e.print_time_seconds||0),e.time_accuracy&&(0,G.jsxs)(`span`,{className:`text-[10px] px-1 rounded ${e.time_accuracy>=95&&e.time_accuracy<=105?`bg-bambu-green/20 text-bambu-green`:e.time_accuracy>105?`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`:`bg-orange-100 dark:bg-orange-500/20 text-orange-700 dark:text-orange-400`}`,children:[e.time_accuracy>100?`+`:``,(e.time_accuracy-100).toFixed(0),`%`]})]}),e.filament_used_grams&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-bambu-gray`,children:[(0,G.jsx)(Sl,{className:`w-3 h-3`}),e.filament_used_grams.toFixed(1),`g`]}),(e.cost!=null||e.energy_cost!=null)&&(0,G.jsxs)(`div`,{className:`flex items-center gap-3 text-bambu-gray`,children:[e.cost!=null&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(Ls,{className:`w-3 h-3`}),d,e.cost.toFixed(2)]}),e.energy_cost!=null&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,title:`${f(`stats.energyUsed`)}: ${e.energy_kwh?.toFixed(3)||`N/A`} kWh`,children:[(0,G.jsx)(rd,{className:`w-3 h-3`}),d,e.energy_cost.toFixed(2)]})]}),(e.layer_height||e.total_layers)&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-bambu-gray`,children:[(0,G.jsx)(qc,{className:`w-3 h-3`}),e.total_layers&&(0,G.jsx)(`span`,{children:e.total_layers===1?f(`archives.card.layer`,{count:e.total_layers}):f(`archives.card.layers`,{count:e.total_layers})}),e.total_layers&&e.layer_height&&(0,G.jsx)(`span`,{className:`text-bambu-gray/50`,children:`·`}),e.layer_height&&(0,G.jsxs)(`span`,{children:[e.layer_height,`mm`]})]}),e.object_count!=null&&e.object_count>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-bambu-gray`,title:e.object_count===1?f(`archives.card.object`,{count:e.object_count}):f(`archives.card.objects`,{count:e.object_count}),children:[(0,G.jsx)(Zo,{className:`w-3 h-3`}),e.object_count===1?f(`archives.card.object`,{count:e.object_count}):f(`archives.card.objects`,{count:e.object_count})]}),e.sliced_for_model&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-bambu-gray`,title:f(`archives.card.slicedFor`,{model:e.sliced_for_model}),children:[(0,G.jsx)(Ll,{className:`w-3 h-3`}),e.sliced_for_model]}),e.filament_type&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 col-span-2`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray text-xs`,children:e.filament_type}),e.filament_color&&(0,G.jsx)(`div`,{className:`flex items-center gap-0.5 flex-wrap`,children:e.filament_color.split(`,`).map((e,t)=>(0,G.jsx)(`div`,{className:`w-3 h-3 rounded-full border border-black/20`,style:{backgroundColor:e},title:e},t))})]})]}),b&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-bambu-green text-xs mb-3`,title:f(`archives.card.slicerAmsMappingTooltip`,{printer:b}),children:[(0,G.jsx)(Ss,{className:`w-3.5 h-3.5`}),f(`archives.card.slicerAmsMapping`,{printer:b})]}),(e.tags||e.notes)&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-1.5 mb-3`,children:[e.notes&&(0,G.jsx)(`div`,{className:`flex items-center gap-1 px-1.5 py-0.5 bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400 rounded text-xs`,title:e.notes,children:(0,G.jsx)(Su,{className:`w-3 h-3`})}),e.tags?.split(`,`).map((e,t)=>(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-bambu-dark-tertiary text-bambu-gray-light rounded text-xs`,children:e.trim()},t))]}),(0,G.jsx)(`div`,{className:`flex-1`}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-xs text-bambu-gray border-t border-bambu-dark-tertiary pt-3`,children:[(0,G.jsx)(`span`,{children:rp(e.created_at,c)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[e.created_by_username&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,title:f(`archives.card.uploadedBy`,{name:e.created_by_username}),children:[(0,G.jsx)(Vu,{className:`w-3 h-3`}),e.created_by_username]}),(0,G.jsx)(`span`,{children:Ud(e.file_size)})]})]}),(0,G.jsxs)(`div`,{className:`flex gap-1 mt-3`,children:[$4(e)?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(Q,{variant:`primary`,size:`sm`,className:`flex-1 min-w-0 overflow-hidden`,onClick:()=>S(!0),disabled:!e.file_path||!g(`queue:create`)||!_(`archives`,`reprint`,e.created_by_id),title:e.file_path?g(`queue:create`)?_(`archives`,`reprint`,e.created_by_id)?void 0:f(`archives.card.noPermissionReprint`):f(`archives.permission.noAddToQueue`):f(`archives.card.noFileForReprint`),children:[(0,G.jsx)(Ll,{className:`w-3 h-3 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`hidden xl:inline truncate`,children:f(`common.print`)})]}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,className:`min-w-0 p-1 sm:p-1.5`,onClick:()=>{let t=e.print_name||e.filename||`model`;e3(e.id,t,`file`,l)},title:f(`archives.card.openInBambuStudio`),children:(0,G.jsx)(nc,{className:`w-3 h-3 sm:w-4 sm:h-4`})})]}):(0,G.jsxs)(Q,{variant:`primary`,size:`sm`,className:`flex-1 min-w-0 overflow-hidden`,onClick:()=>{if(u)w(!0);else{let t=e.print_name||e.filename||`model`;e3(e.id,t,`file`,l)}},title:f(u?`slice.title`:`archives.card.openInBambuStudioToSlice`),children:[u?(0,G.jsx)(Rs,{className:`w-3 h-3 flex-shrink-0`}):(0,G.jsx)(nc,{className:`w-3 h-3 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`hidden xl:inline truncate`,children:f(`archives.card.slice`)})]}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,className:`min-w-0 p-1 sm:p-1.5`,onClick:()=>{let t=e.external_url||e.makerworld_url;t&&window.open(t,`_blank`)},disabled:!e.external_url&&!e.makerworld_url,title:e.external_url?f(`archives.card.externalLink`):e.makerworld_url?f(`archives.card.makerWorld`,{designer:e.designer||f(`archives.card.viewProject`)}):f(`archives.card.noExternalLink`),children:(0,G.jsx)(kc,{className:`w-3 h-3 sm:w-4 sm:h-4 ${!e.external_url&&!e.makerworld_url?`opacity-20`:``}`})}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,className:`min-w-0 p-1 sm:p-1.5`,onClick:()=>{Z.downloadArchive(e.id,`${e.print_name||e.filename}.3mf`).catch(e=>{console.error(`Archive download failed:`,e)})},title:f(`archives.card.download`),children:(0,G.jsx)(Ys,{className:`w-3 h-3 sm:w-4 sm:h-4`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,className:`min-w-0 p-1 sm:p-1.5`,onClick:()=>O(!0),disabled:!_(`archives`,`delete`,e.created_by_id),title:_(`archives`,`delete`,e.created_by_id)?f(`archives.card.delete`):f(`archives.card.noPermissionDelete`),children:(0,G.jsx)(Nu,{className:`w-3 h-3 sm:w-4 sm:h-4 text-red-600 dark:text-red-400`})})]})]}),M&&(0,G.jsx)(iK,{archive:e,onClose:()=>N(!1)}),P&&(0,G.jsx)(aK,{archiveId:e.id,archiveName:e.print_name||e.filename,onClose:()=>F(!1)}),ye&&(0,G.jsx)(TG,{plates:ye,onSelect:t=>{be(null),v(`/gcode-viewer?archive=${e.id}&plate=${t}`)},onClose:()=>be(null)}),x&&(0,G.jsx)(WW,{mode:`create`,archiveId:e.id,archiveName:e.print_name||e.filename,onClose:()=>S(!1)}),C&&(0,G.jsx)(UG,{source:{kind:`archive`,id:e.id,filename:e.print_name||e.filename||`model`},onClose:()=>w(!1)}),T&&(0,G.jsx)(KG,{source:{kind:`archive`,id:e.id,filename:e.print_name||e.filename||`model`},onClose:()=>E(!1)}),D&&(0,G.jsxs)(rf,{title:f(`archives.modal.deleteArchive`),message:f(`archives.modal.deleteConfirm`,{name:e.print_name||e.filename}),confirmText:f(`archives.modal.deleteButton`),variant:`danger`,confirmDisabled:(j.data?.currently_printing??0)>0,onConfirm:()=>{ze.mutate(k),O(!1),A(!1)},onCancel:()=>{O(!1),A(!1)},children:[(j.data?.related_queue_items??0)>0&&(0,G.jsx)(`div`,{className:(j.data?.currently_printing??0)>0?`text-sm text-red-600 dark:text-red-400 mb-2`:`text-sm text-amber-600 dark:text-amber-400 mb-2`,children:(j.data?.currently_printing??0)>0?f(`archives.modal.deleteBlockedByPrinting`,{count:j.data.currently_printing}):f(`archives.modal.deleteQueueItemsWarning`,{count:j.data.related_queue_items})}),(0,G.jsxs)(`label`,{className:`flex items-start gap-2 cursor-pointer text-sm text-bambu-gray`,children:[(0,G.jsx)(`input`,{type:`checkbox`,className:`mt-0.5 accent-red-500`,checked:k,onChange:e=>A(e.target.checked)}),(0,G.jsx)(`span`,{children:f(`archives.modal.deletePurgeStats`)})]})]}),H&&(0,G.jsx)(rf,{title:f(`archives.modal.removeSource3mf`),message:f(`archives.modal.removeSource3mfConfirm`,{name:e.print_name||e.filename}),confirmText:f(`archives.modal.removeButton`),variant:`danger`,onConfirm:()=>{Pe.mutate(),ce(!1)},onCancel:()=>ce(!1)}),le&&(0,G.jsx)(rf,{title:f(`archives.modal.removeF3d`),message:f(`archives.modal.removeF3dConfirm`,{name:e.print_name||e.filename}),confirmText:f(`archives.modal.removeButton`),variant:`danger`,onConfirm:()=>{Ie.mutate(),ue(!1)},onCancel:()=>ue(!1)}),de&&(0,G.jsx)(rf,{title:f(`archives.modal.removeTimelapse`),message:f(`archives.modal.removeTimelapseConfirm`,{name:e.print_name||e.filename}),confirmText:f(`archives.modal.removeButton`),variant:`danger`,onConfirm:()=>{je.mutate(),fe(!1)},onCancel:()=>fe(!1)}),pe&&(0,G.jsx)(FT,{x:pe.x,y:pe.y,items:We,onClose:()=>me(null)}),R&&(0,G.jsx)(q4,{archiveId:e.id,archiveName:e.print_name||e.filename,printerName:t,onClose:()=>z(!1)}),I&&e.timelapse_path&&(0,G.jsx)(K4,{src:Z.getArchiveTimelapse(e.id),title:f(`archives.modal.timelapse`,{name:e.print_name||e.filename}),downloadFilename:`${e.print_name||e.filename}_timelapse.mp4`,archiveId:e.id,onClose:()=>L(!1),onEdit:()=>{m.invalidateQueries({queryKey:[`archives`]}),L(!1)}}),B&&ee.length>0&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/80 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-card-dark rounded-lg max-w-lg w-full max-h-[80vh] flex flex-col`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-gray-700`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white`,children:f(`archives.modal.selectTimelapse`)}),(0,G.jsx)(`p`,{className:`text-sm text-gray-400 mt-1`,children:f(`archives.modal.selectTimelapseDesc`)})]}),(0,G.jsx)(`button`,{onClick:()=>{V(!1),te([])},className:`text-gray-400 hover:text-white p-1`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(`div`,{className:`overflow-y-auto flex-1 p-2`,children:ee.map(e=>(0,G.jsxs)(`button`,{onClick:()=>Re.mutate(e.name),disabled:Re.isPending,className:`w-full text-left p-3 rounded-lg hover:bg-gray-700 transition-colors flex items-center gap-3 disabled:opacity-50`,children:[(0,G.jsx)(pc,{className:`w-8 h-8 text-bambu-green flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium truncate`,children:e.name}),(0,G.jsxs)(`p`,{className:`text-sm text-gray-400`,children:[Ud(e.size),e.mtime&&` • ${rp(e.mtime,c)}`]})]})]},e.name))}),(0,G.jsx)(`div`,{className:`p-4 border-t border-gray-700`,children:(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{V(!1),te([])},className:`w-full`,children:`Cancel`})})]})}),ne&&(0,G.jsx)(sK,{archiveId:e.id,archiveName:e.print_name||e.filename,onClose:()=>re(!1)}),ie&&e.photos&&e.photos.length>0&&(0,G.jsx)(cK,{archiveId:e.id,archiveName:e.print_name||e.filename,photos:e.photos,onClose:()=>ae(!1),onDelete:async t=>{try{await Z.deleteArchivePhoto(e.id,t),m.invalidateQueries({queryKey:[`archives`]}),h(f(`archives.toast.photoDeleted`))}catch{h(f(`archives.toast.failedDeletePhoto`),`error`)}}}),oe&&(0,G.jsx)(G4,{archiveId:e.id,archiveName:e.print_name||e.filename,onClose:()=>se(!1)}),(0,G.jsx)(`input`,{ref:xe,type:`file`,accept:`.3mf`,className:`hidden`,onChange:e=>{let t=e.target.files?.[0];t&&Ne.mutate(t),e.target.value=``}}),(0,G.jsx)(`input`,{ref:Se,type:`file`,accept:`.f3d`,className:`hidden`,onChange:e=>{let t=e.target.files?.[0];t&&Fe.mutate(t),e.target.value=``}}),(0,G.jsx)(`input`,{ref:Ce,type:`file`,accept:`.mp4,.avi,.mkv`,className:`hidden`,onChange:e=>{let t=e.target.files?.[0];t&&Me.mutate(t),e.target.value=``}})]})}function PBe({archive:e,printerName:t,isSelected:n,onSelect:r,selectionMode:i,projects:a,isHighlighted:o,preferredSlicer:s=`bambu_studio`,useSlicerApi:c=!1,t:l,onNavigateToArchive:u}){let d=co(),{showToast:f}=Gd(),{hasPermission:p,canModify:m}=jd(),[h,g]=(0,y.useState)(!1),[_,v]=(0,y.useState)(!1),[b,x]=(0,y.useState)(!1),[S,C]=(0,y.useState)(!1),w=K({queryKey:[`archive`,e.id,`delete-impact`],queryFn:()=>Z.getArchiveDeleteImpact(e.id),enabled:b,staleTime:0}),T=or(),[E,D]=(0,y.useState)(!1),[O,k]=(0,y.useState)(!1),[A,j]=(0,y.useState)(!1),[M,N]=(0,y.useState)(!1),[P,F]=(0,y.useState)(!1),[I,L]=(0,y.useState)(!1),[R,z]=(0,y.useState)([]),[B,V]=(0,y.useState)(!1),[ee,te]=(0,y.useState)(!1),[ne,re]=(0,y.useState)(!1),[ie,ae]=(0,y.useState)(!1),[oe,se]=(0,y.useState)(!1),[H,ce]=(0,y.useState)(!1),[le,ue]=(0,y.useState)(null),de=(0,y.useRef)(null),fe=(0,y.useRef)(null),pe=(0,y.useRef)(null),[me,he]=(0,y.useState)(null),ge=e.duplicate_sequence??0,_e=e.original_archive_id??null,ve=async()=>{try{let t=await Z.getArchivePlates(e.id);if(t.is_multi_plate&&t.plates.length>1){he(t.plates);return}}catch{}T(`/gcode-viewer?archive=${e.id}`)},ye=q({mutationFn:()=>Z.deleteArchiveTimelapse(e.id),onSuccess:()=>{d.invalidateQueries({queryKey:[`archives`]}),f(l(`archives.toast.timelapseRemoved`))},onError:e=>{f(e.message||l(`archives.toast.failedRemoveTimelapse`),`error`)}}),be=q({mutationFn:t=>Z.uploadArchiveTimelapse(e.id,t),onSuccess:e=>{d.invalidateQueries({queryKey:[`archives`]}),f(l(`archives.toast.timelapseUploaded`,{filename:e.filename}))},onError:e=>{f(e.message||l(`archives.toast.failedUploadTimelapse`),`error`)}}),xe=q({mutationFn:t=>Z.uploadSource3mf(e.id,t),onSuccess:e=>{d.invalidateQueries({queryKey:[`archives`]}),f(l(`archives.toast.source3mfAttached`,{filename:e.filename}))},onError:e=>{f(e.message||l(`archives.toast.failedUploadSource3mf`),`error`)}}),Se=q({mutationFn:()=>Z.deleteSource3mf(e.id),onSuccess:()=>{d.invalidateQueries({queryKey:[`archives`]}),f(l(`archives.toast.source3mfRemoved`))},onError:e=>{f(e.message||l(`archives.toast.failedRemoveSource3mf`),`error`)}}),Ce=q({mutationFn:t=>Z.uploadF3d(e.id,t),onSuccess:e=>{d.invalidateQueries({queryKey:[`archives`]}),f(l(`archives.toast.f3dAttached`,{filename:e.filename}))},onError:e=>{f(e.message||l(`archives.toast.failedUploadF3d`),`error`)}}),we=q({mutationFn:()=>Z.deleteF3d(e.id),onSuccess:()=>{d.invalidateQueries({queryKey:[`archives`]}),f(l(`archives.toast.f3dRemoved`))},onError:e=>{f(e.message||l(`archives.toast.failedRemoveF3d`),`error`)}}),Te=q({mutationFn:()=>Z.scanArchiveTimelapse(e.id),onSuccess:e=>{e.status===`attached`?(d.invalidateQueries({queryKey:[`archives`]}),f(l(`archives.toast.timelapseAttached`,{filename:e.filename}))):e.status===`exists`?f(l(`archives.toast.timelapseAlreadyAttached`)):e.status===`not_found`&&e.available_files&&e.available_files.length>0?(z(e.available_files),L(!0)):f(e.message||l(`archives.toast.noMatchingTimelapse`),`warning`)},onError:e=>{f(e.message||l(`archives.toast.failedScanTimelapse`),`error`)}}),Ee=q({mutationFn:t=>Z.selectArchiveTimelapse(e.id,t),onSuccess:e=>{d.invalidateQueries({queryKey:[`archives`]}),f(l(`archives.toast.timelapseAttached`,{filename:e.filename})),L(!1),z([])},onError:e=>{f(e.message||l(`archives.toast.failedAttachTimelapse`),`error`)}}),De=q({mutationFn:t=>Z.deleteArchive(e.id,t),onSuccess:()=>{QG(d),f(l(`archives.toast.archiveDeleted`))},onError:()=>{f(l(`archives.toast.failedDeleteArchive`),`error`)}}),Oe=q({mutationFn:()=>Z.toggleFavorite(e.id),onSuccess:e=>{d.invalidateQueries({queryKey:[`archives`]}),f(e.is_favorite?l(`archives.toast.addedToFavorites`):l(`archives.toast.removedFromFavorites`))}}),{data:ke}=K({queryKey:[`archive-folders`,e.id],queryFn:()=>Z.getLibraryFoldersByArchive(e.id)}),Ae=q({mutationFn:t=>Z.updateArchive(e.id,{project_id:t}),onSuccess:()=>{QG(d),f(l(`archives.toast.projectUpdated`))},onError:()=>{f(l(`archives.toast.failedUpdateProject`),`error`)}}),je=e=>{e.preventDefault(),ue({x:e.clientX,y:e.clientY})},Me=[...$4(e)?[{label:l(`common.print`),icon:(0,G.jsx)(Ll,{className:`w-4 h-4`}),onClick:()=>D(!0),disabled:!e.file_path||!p(`queue:create`)||!m(`archives`,`reprint`,e.created_by_id),title:e.file_path?p(`queue:create`)?m(`archives`,`reprint`,e.created_by_id)?void 0:l(`archives.permission.noReprint`):l(`archives.permission.noAddToQueue`):l(`archives.card.noFileForReprint`)},{label:l(`archives.menu.openInBambuStudio`),icon:(0,G.jsx)(nc,{className:`w-4 h-4`}),onClick:()=>{let t=e.print_name||e.filename||`model`;e3(e.id,t,`file`,s)},disabled:!e.file_path,title:e.file_path?void 0:l(`archives.card.noFileForReprint`)}]:[{label:l(`archives.menu.slice`),icon:c?(0,G.jsx)(Rs,{className:`w-4 h-4`}):(0,G.jsx)(nc,{className:`w-4 h-4`}),onClick:()=>{if(c)k(!0);else{let t=e.print_name||e.filename||`model`;e3(e.id,t,`file`,s)}}},...c?[{label:l(`library.runWithPipeline.actionLabel`),icon:(0,G.jsx)(Ml,{className:`w-4 h-4`}),onClick:()=>j(!0),disabled:!p(`pipelines:run`),title:p(`pipelines:run`)?void 0:l(`library.runWithPipeline.noPermission`)}]:[]],{label:e.external_url?l(`archives.menu.externalLink`):l(`archives.menu.viewOnMakerWorld`),icon:(0,G.jsx)(kc,{className:`w-4 h-4`}),onClick:()=>{let t=e.external_url||e.makerworld_url;t&&window.open(t,`_blank`)},disabled:!e.external_url&&!e.makerworld_url},{label:``,divider:!0,onClick:()=>{}},{label:l(`archives.menu.preview3d`),icon:(0,G.jsx)(Zo,{className:`w-4 h-4`}),onClick:()=>{ve()}},{label:l(`archives.menu.viewTimelapse`),icon:(0,G.jsx)(pc,{className:`w-4 h-4`}),onClick:()=>N(!0),disabled:!e.timelapse_path},{label:l(`archives.menu.scanForTimelapse`),icon:(0,G.jsx)(Yl,{className:`w-4 h-4`}),onClick:()=>Te.mutate(),disabled:!e.printer_id||!!e.timelapse_path||Te.isPending||!m(`archives`,`update`,e.created_by_id),title:m(`archives`,`update`,e.created_by_id)?void 0:l(`archives.permission.noUpdateArchives`)},{label:l(`archives.menu.uploadTimelapse`),icon:(0,G.jsx)(Bu,{className:`w-4 h-4`}),onClick:()=>pe.current?.click(),disabled:!!e.timelapse_path||!m(`archives`,`update`,e.created_by_id),title:m(`archives`,`update`,e.created_by_id)?void 0:l(`archives.permission.noUpdateArchives`)},...e.timelapse_path?[{label:l(`archives.menu.removeTimelapse`),icon:(0,G.jsx)(Nu,{className:`w-4 h-4`}),onClick:()=>ce(!0),danger:!0,disabled:!m(`archives`,`update`,e.created_by_id),title:m(`archives`,`update`,e.created_by_id)?void 0:l(`archives.permission.noUpdateArchives`)}]:[],{label:``,divider:!0,onClick:()=>{}},{label:e.source_3mf_path?l(`archives.menu.downloadSource3mf`):l(`archives.menu.uploadSource3mf`),icon:(0,G.jsx)(sc,{className:`w-4 h-4`}),onClick:()=>{e.source_3mf_path?Z.downloadSource3mf(e.id).catch(e=>{console.error(`Source 3MF download failed:`,e)}):de.current?.click()},disabled:!e.source_3mf_path&&!m(`archives`,`update`,e.created_by_id),title:!e.source_3mf_path&&!m(`archives`,`update`,e.created_by_id)?l(`archives.permission.noUploadFiles`):void 0},...e.source_3mf_path?[{label:l(`archives.menu.replaceSource3mf`),icon:(0,G.jsx)(Bu,{className:`w-4 h-4`}),onClick:()=>de.current?.click(),disabled:!m(`archives`,`update`,e.created_by_id),title:m(`archives`,`update`,e.created_by_id)?void 0:l(`archives.permission.noUpdateArchives`)},{label:l(`archives.menu.removeSource3mf`),icon:(0,G.jsx)(Nu,{className:`w-4 h-4`}),onClick:()=>ae(!0),danger:!0,disabled:!m(`archives`,`update`,e.created_by_id),title:m(`archives`,`update`,e.created_by_id)?void 0:l(`archives.permission.noUpdateArchives`)}]:[],{label:e.f3d_path?l(`archives.menu.replaceF3d`):l(`archives.menu.uploadF3d`),icon:(0,G.jsx)(Zo,{className:`w-4 h-4`}),onClick:()=>fe.current?.click(),disabled:!m(`archives`,`update`,e.created_by_id),title:m(`archives`,`update`,e.created_by_id)?void 0:l(`archives.permission.noUpdateArchives`)},...e.f3d_path?[{label:l(`archives.menu.downloadF3d`),icon:(0,G.jsx)(Ys,{className:`w-4 h-4`}),onClick:()=>{Z.downloadF3d(e.id).catch(e=>{console.error(`F3D download failed:`,e)})}},{label:l(`archives.menu.removeF3d`),icon:(0,G.jsx)(Nu,{className:`w-4 h-4`}),onClick:()=>se(!0),danger:!0,disabled:!m(`archives`,`update`,e.created_by_id),title:m(`archives`,`update`,e.created_by_id)?void 0:l(`archives.permission.noUpdateArchives`)}]:[],{label:``,divider:!0,onClick:()=>{}},{label:l(`archives.menu.download`),icon:(0,G.jsx)(Ys,{className:`w-4 h-4`}),onClick:()=>{Z.downloadArchive(e.id,`${e.print_name||e.filename}.3mf`).catch(e=>{console.error(`Archive download failed:`,e)})},disabled:!p(`archives:read`),title:p(`archives:read`)?void 0:l(`archives.permission.noDownload`)},{label:l(`archives.menu.copyDownloadLink`),icon:(0,G.jsx)(Vs,{className:`w-4 h-4`}),onClick:()=>{let t=`${window.location.origin}${Z.getArchiveDownload(e.id)}`;navigator.clipboard.writeText(t).then(()=>{f(l(`archives.toast.linkCopied`))}).catch(()=>{f(l(`archives.toast.failedCopyLink`),`error`)})},disabled:!p(`archives:read`),title:p(`archives:read`)?void 0:l(`archives.permission.noCopyLink`)},{label:l(`archives.menu.qrCode`),icon:(0,G.jsx)(Rl,{className:`w-4 h-4`}),onClick:()=>V(!0)},{label:e.photos?.length?l(`archives.menu.viewPhotosCount`,{count:e.photos.length}):l(`archives.menu.viewPhotos`),icon:(0,G.jsx)(ss,{className:`w-4 h-4`}),onClick:()=>te(!0),disabled:!e.photos?.length},{label:l(`archives.menu.projectPage`),icon:(0,G.jsx)(dc,{className:`w-4 h-4`}),onClick:()=>re(!0)},{label:``,divider:!0,onClick:()=>{}},{label:e.is_favorite?l(`archives.menu.removeFromFavorites`):l(`archives.menu.addToFavorites`),icon:(0,G.jsx)(bu,{className:`w-4 h-4 ${e.is_favorite?`fill-yellow-400 text-yellow-400`:m(`archives`,`update`,e.created_by_id)?`group-hover:text-yellow-400`:``}`}),onClick:()=>Oe.mutate(),disabled:!m(`archives`,`update`,e.created_by_id),title:m(`archives`,`update`,e.created_by_id)?void 0:l(`archives.permission.noUpdateArchives`)},{label:l(`archives.menu.edit`),icon:(0,G.jsx)(kl,{className:`w-4 h-4`}),onClick:()=>g(!0),disabled:!m(`archives`,`update`,e.created_by_id),title:m(`archives`,`update`,e.created_by_id)?void 0:l(`archives.permission.noUpdateArchives`)},{label:l(`archives.menu.printLog`),icon:(0,G.jsx)(Rc,{className:`w-4 h-4`}),onClick:()=>v(!0)},...e.project_id&&e.project_name?[{label:l(`archives.menu.goToProject`,{name:e.project_name}),icon:(0,G.jsx)(gc,{className:`w-4 h-4 text-bambu-green`}),onClick:()=>window.location.href=`/projects`}]:[],{label:l(`archives.menu.addToProject`),icon:(0,G.jsx)(gc,{className:`w-4 h-4`}),onClick:()=>{},submenuSearchPlaceholder:$G(a??[],e.project_id).length>5?l(`archives.menu.searchProjects`):void 0,submenu:(()=>{let t=[];if(e.project_id&&t.push({label:l(`archives.menu.removeFromProject`),icon:(0,G.jsx)(td,{className:`w-4 h-4`}),onClick:()=>Ae.mutate(null)}),!a)t.push({label:l(`archives.menu.loading`),icon:(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),onClick:()=>{},disabled:!0});else{let n=$G(a,e.project_id).sort((e,t)=>e.name.localeCompare(t.name));n.length===0?t.push({label:l(`archives.menu.noProjectsAvailable`),icon:(0,G.jsx)(gc,{className:`w-4 h-4 opacity-50`}),onClick:()=>{},disabled:!0}):n.forEach(n=>{t.push({label:n.name,icon:(0,G.jsx)(`div`,{className:`w-3 h-3 rounded-full flex-shrink-0`,style:{backgroundColor:n.color||`#888`}}),onClick:()=>Ae.mutate(n.id),disabled:e.project_id===n.id})})}return t})()},{label:l(n?`archives.menu.deselect`:`archives.menu.select`),icon:n?(0,G.jsx)(_u,{className:`w-4 h-4`}):(0,G.jsx)(yu,{className:`w-4 h-4`}),onClick:()=>r(e.id)},{label:``,divider:!0,onClick:()=>{}},{label:l(`archives.menu.delete`),icon:(0,G.jsx)(Nu,{className:`w-4 h-4`}),onClick:()=>x(!0),danger:!0,disabled:!m(`archives`,`delete`,e.created_by_id),title:m(`archives`,`delete`,e.created_by_id)?void 0:l(`archives.permission.noDelete`)}];return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{"data-archive-id":e.id,className:`grid grid-cols-12 gap-4 px-4 py-3 items-center hover:bg-bambu-dark-tertiary/30 ${n?`bg-bambu-green/10`:``}`,style:o?{outline:`4px solid #facc15`,outlineOffset:`-4px`}:void 0,onContextMenu:je,children:[(0,G.jsxs)(`div`,{className:`col-span-1 flex items-center gap-2`,children:[i&&(0,G.jsx)(`button`,{onClick:()=>r(e.id),children:n?(0,G.jsx)(_u,{className:`w-4 h-4 text-bambu-green`}):(0,G.jsx)(yu,{className:`w-4 h-4 text-bambu-gray`})}),e.thumbnail_path?(0,G.jsx)(`img`,{src:Z.getArchiveThumbnail(e.id),alt:``,className:`w-10 h-10 object-cover rounded`}):(0,G.jsx)(`div`,{className:`w-10 h-10 bg-bambu-dark rounded flex items-center justify-center`,children:(0,G.jsx)(Vc,{className:`w-5 h-5 text-bambu-dark-tertiary`})})]}),(0,G.jsxs)(`div`,{className:`col-span-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`p`,{className:`text-white text-sm truncate`,children:e.print_name||e.filename}),(e.status===`failed`||e.status===`aborted`)&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 rounded text-[10px] leading-tight bg-status-error/80 text-white flex-shrink-0`,children:e.status===`aborted`?l(`archives.card.cancelled`):l(`archives.card.failed`)}),e.duplicate_count>0&&ge>0&&_e&&(0,G.jsxs)(`button`,{onClick:e=>{e.stopPropagation(),u?.(_e)},className:`px-1.5 py-0.5 rounded text-[10px] leading-tight bg-purple-500/80 hover:bg-purple-600/90 text-white flex-shrink-0 transition-colors flex items-center gap-1`,title:l(`archives.viewOriginalPrint`,{id:_e}),children:[(0,G.jsx)(Vs,{className:`w-3 h-3`}),`#`,ge]}),e.duplicate_count>0&&ge===0&&(0,G.jsxs)(`span`,{className:`px-1.5 py-0.5 rounded text-[10px] leading-tight bg-purple-500/80 text-white flex-shrink-0 flex items-center gap-1`,title:`${e.duplicate_count} reprint${e.duplicate_count===1?``:`s`}`,children:[(0,G.jsx)(Ec,{className:`w-3 h-3`}),`+`,e.duplicate_count]}),e.timelapse_path&&(0,G.jsx)(`span`,{title:l(`archives.list.hasTimelapse`),children:(0,G.jsx)(pc,{className:`w-3.5 h-3.5 text-bambu-green flex-shrink-0`})}),ke&&ke.length>0&&(0,G.jsx)(Ai,{to:`/files?folder=${ke[0].id}`,className:`flex-shrink-0`,title:l(`archives.card.openFolder`,{name:ke[0].name}),onClick:e=>e.stopPropagation(),children:(0,G.jsx)(_c,{className:`w-3.5 h-3.5 text-yellow-600 dark:text-yellow-400`})})]}),(e.filament_type||e.sliced_for_model)&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 mt-0.5`,children:[e.sliced_for_model&&(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray flex items-center gap-1`,title:l(`archives.card.slicedFor`,{model:e.sliced_for_model}),children:[(0,G.jsx)(Ll,{className:`w-2.5 h-2.5`}),e.sliced_for_model]}),(()=>{let t=kW(e.bed_type);return t?(0,G.jsx)(`img`,{src:t.icon,alt:t.label,title:t.label,className:`w-3.5 h-3.5 flex-shrink-0`}):null})(),e.sliced_for_model&&e.filament_type&&(0,G.jsx)(`span`,{className:`text-bambu-gray/50`,children:`·`}),e.filament_type&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:e.filament_type}),e.filament_color&&(0,G.jsx)(`div`,{className:`flex items-center gap-0.5 flex-wrap`,children:e.filament_color.split(`,`).map((e,t)=>(0,G.jsx)(`div`,{className:`w-2.5 h-2.5 rounded-full border border-black/20`,style:{backgroundColor:e},title:e},t))})]})]}),(0,G.jsx)(`div`,{className:`col-span-2 text-sm text-bambu-gray truncate`,children:t}),(0,G.jsxs)(`div`,{className:`col-span-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(`div`,{children:np(e.created_at)}),e.created_by_username&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1 text-xs opacity-75`,title:l(`archives.card.uploadedBy`,{name:e.created_by_username}),children:[(0,G.jsx)(Vu,{className:`w-3 h-3`}),e.created_by_username]})]}),(0,G.jsx)(`div`,{className:`col-span-1 text-sm text-bambu-gray`,children:Ud(e.file_size)}),(0,G.jsxs)(`div`,{className:`col-span-2 flex justify-end gap-1`,children:[$4(e)&&(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>D(!0),disabled:!e.file_path||!p(`queue:create`)||!m(`archives`,`reprint`,e.created_by_id),title:e.file_path?p(`queue:create`)?m(`archives`,`reprint`,e.created_by_id)?l(`common.print`):l(`archives.card.noPermissionReprint`):l(`archives.permission.noAddToQueue`):l(`archives.card.noFileForReprint`),className:`text-bambu-green hover:text-bambu-green-light hover:bg-bambu-green/10`,children:(0,G.jsx)(Ml,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>{let t=e.print_name||e.filename||`model`;e3(e.id,t,`file`,s)},title:l(`archives.card.openInBambuStudio`),children:(0,G.jsx)(nc,{className:`w-4 h-4`})}),(e.external_url||e.makerworld_url)&&(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>window.open(e.external_url||e.makerworld_url,`_blank`),title:e.external_url?l(`archives.card.externalLink`):`MakerWorld`,children:(0,G.jsx)(kc,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>F(!0),disabled:!e.timelapse_path&&(!p(`printers:files`)||!e.printer_id||!e.started_at),title:!e.timelapse_path&&!p(`printers:files`)?l(`printers.permission.noFiles`):l(`archives.media.download`),children:(0,G.jsx)(pc,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>{Z.downloadArchive(e.id,`${e.print_name||e.filename}.3mf`).catch(e=>{console.error(`Archive download failed:`,e)})},title:l(`archives.card.download`),children:(0,G.jsx)(Ys,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>g(!0),disabled:!m(`archives`,`update`,e.created_by_id),title:m(`archives`,`update`,e.created_by_id)?l(`archives.card.edit`):l(`archives.card.noPermissionEdit`),children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>x(!0),disabled:!m(`archives`,`delete`,e.created_by_id),title:m(`archives`,`delete`,e.created_by_id)?l(`archives.card.delete`):l(`archives.card.noPermissionDelete`),children:(0,G.jsx)(Nu,{className:`w-4 h-4 text-red-600 dark:text-red-400`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:e=>{let t=e.currentTarget.getBoundingClientRect();ue({x:t.left,y:t.bottom+4})},title:l(`archives.card.moreOptions`),children:(0,G.jsx)(Qs,{className:`w-4 h-4`})})]})]}),h&&(0,G.jsx)(iK,{archive:e,onClose:()=>g(!1)}),_&&(0,G.jsx)(aK,{archiveId:e.id,archiveName:e.print_name||e.filename,onClose:()=>v(!1)}),me&&(0,G.jsx)(TG,{plates:me,onSelect:t=>{he(null),T(`/gcode-viewer?archive=${e.id}&plate=${t}`)},onClose:()=>he(null)}),E&&(0,G.jsx)(WW,{mode:`create`,archiveId:e.id,archiveName:e.print_name||e.filename,onClose:()=>D(!1)}),O&&(0,G.jsx)(UG,{source:{kind:`archive`,id:e.id,filename:e.print_name||e.filename||`model`},onClose:()=>k(!1)}),A&&(0,G.jsx)(KG,{source:{kind:`archive`,id:e.id,filename:e.print_name||e.filename||`model`},onClose:()=>j(!1)}),b&&(0,G.jsxs)(rf,{title:l(`archives.modal.deleteArchive`),message:l(`archives.modal.deleteConfirm`,{name:e.print_name||e.filename}),confirmText:l(`archives.modal.deleteButton`),variant:`danger`,confirmDisabled:(w.data?.currently_printing??0)>0,onConfirm:()=>{De.mutate(S),x(!1),C(!1)},onCancel:()=>{x(!1),C(!1)},children:[(w.data?.related_queue_items??0)>0&&(0,G.jsx)(`div`,{className:(w.data?.currently_printing??0)>0?`text-sm text-red-600 dark:text-red-400 mb-2`:`text-sm text-amber-600 dark:text-amber-400 mb-2`,children:(w.data?.currently_printing??0)>0?l(`archives.modal.deleteBlockedByPrinting`,{count:w.data.currently_printing}):l(`archives.modal.deleteQueueItemsWarning`,{count:w.data.related_queue_items})}),(0,G.jsxs)(`label`,{className:`flex items-start gap-2 cursor-pointer text-sm text-bambu-gray`,children:[(0,G.jsx)(`input`,{type:`checkbox`,className:`mt-0.5 accent-red-500`,checked:S,onChange:e=>C(e.target.checked)}),(0,G.jsx)(`span`,{children:l(`archives.modal.deletePurgeStats`)})]})]}),ie&&(0,G.jsx)(rf,{title:l(`archives.modal.removeSource3mf`),message:l(`archives.modal.removeSource3mfConfirm`,{name:e.print_name||e.filename}),confirmText:l(`archives.modal.removeButton`),variant:`danger`,onConfirm:()=>{Se.mutate(),ae(!1)},onCancel:()=>ae(!1)}),oe&&(0,G.jsx)(rf,{title:l(`archives.modal.removeF3d`),message:l(`archives.modal.removeF3dConfirm`,{name:e.print_name||e.filename}),confirmText:l(`archives.modal.removeButton`),variant:`danger`,onConfirm:()=>{we.mutate(),se(!1)},onCancel:()=>se(!1)}),H&&(0,G.jsx)(rf,{title:l(`archives.modal.removeTimelapse`),message:l(`archives.modal.removeTimelapseConfirm`,{name:e.print_name||e.filename}),confirmText:l(`archives.modal.removeButton`),variant:`danger`,onConfirm:()=>{ye.mutate(),ce(!1)},onCancel:()=>ce(!1)}),le&&(0,G.jsx)(FT,{x:le.x,y:le.y,items:Me,onClose:()=>ue(null)}),P&&(0,G.jsx)(q4,{archiveId:e.id,archiveName:e.print_name||e.filename,printerName:t,onClose:()=>F(!1)}),M&&e.timelapse_path&&(0,G.jsx)(K4,{src:Z.getArchiveTimelapse(e.id),title:l(`archives.modal.timelapse`,{name:e.print_name||e.filename}),downloadFilename:`${e.print_name||e.filename}_timelapse.mp4`,archiveId:e.id,onClose:()=>N(!1),onEdit:()=>{d.invalidateQueries({queryKey:[`archives`]}),N(!1)}}),I&&R.length>0&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/80 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-card-dark rounded-lg max-w-lg w-full max-h-[80vh] flex flex-col`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-gray-700`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white`,children:l(`archives.modal.selectTimelapse`)}),(0,G.jsx)(`p`,{className:`text-sm text-gray-400 mt-1`,children:l(`archives.modal.selectTimelapseDesc`)})]}),(0,G.jsx)(`button`,{onClick:()=>{L(!1),z([])},className:`text-gray-400 hover:text-white p-1`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(`div`,{className:`overflow-y-auto flex-1 p-2`,children:R.map(e=>(0,G.jsxs)(`button`,{onClick:()=>Ee.mutate(e.name),disabled:Ee.isPending,className:`w-full text-left p-3 rounded-lg hover:bg-gray-700 transition-colors mb-1`,children:[(0,G.jsx)(`div`,{className:`font-medium text-white`,children:e.name}),(0,G.jsxs)(`div`,{className:`text-sm text-gray-400 flex gap-3`,children:[(0,G.jsx)(`span`,{children:Ud(e.size)}),e.mtime&&(0,G.jsx)(`span`,{children:np(e.mtime)})]})]},e.name))})]})}),B&&(0,G.jsx)(sK,{archiveId:e.id,archiveName:e.print_name||e.filename,onClose:()=>V(!1)}),ee&&e.photos&&(0,G.jsx)(cK,{archiveId:e.id,archiveName:e.print_name||e.filename,photos:e.photos,onClose:()=>te(!1),onDelete:async t=>{try{await Z.deleteArchivePhoto(e.id,t),d.invalidateQueries({queryKey:[`archives`]}),f(l(`archives.toast.photoDeleted`))}catch{f(l(`archives.toast.failedDeletePhoto`),`error`)}}}),ne&&(0,G.jsx)(G4,{archiveId:e.id,archiveName:e.print_name||e.filename,onClose:()=>re(!1)}),(0,G.jsx)(`input`,{ref:de,type:`file`,accept:`.3mf`,className:`hidden`,onChange:e=>{let t=e.target.files?.[0];t&&xe.mutate(t),e.target.value=``}}),(0,G.jsx)(`input`,{ref:fe,type:`file`,accept:`.f3d`,className:`hidden`,onChange:e=>{let t=e.target.files?.[0];t&&Ce.mutate(t),e.target.value=``}}),(0,G.jsx)(`input`,{ref:pe,type:`file`,accept:`.mp4,.avi,.mkv`,className:`hidden`,onChange:e=>{let t=e.target.files?.[0];t&&be.mutate(t),e.target.value=``}})]})}var FBe=[`completed`,`failed`,`aborted`,`cancelled`,`stopped`],IBe=[{id:`all`,label:`All Archives`,icon:(0,G.jsx)(_c,{className:`w-4 h-4`})},{id:`recent`,label:`Last 24 Hours`,icon:(0,G.jsx)(js,{className:`w-4 h-4`})},{id:`this-week`,label:`This Week`,icon:(0,G.jsx)(as,{className:`w-4 h-4`})},{id:`this-month`,label:`This Month`,icon:(0,G.jsx)(as,{className:`w-4 h-4`})},{id:`favorites`,label:`Favorites`,icon:(0,G.jsx)(bu,{className:`w-4 h-4`})},{id:`not-printed`,label:`Not Printed`,icon:(0,G.jsx)(Bu,{className:`w-4 h-4`})},{id:`printed`,label:`Printed`,icon:(0,G.jsx)(Ll,{className:`w-4 h-4`})},{id:`failed`,label:`Failed Prints`,icon:(0,G.jsx)(ys,{className:`w-4 h-4`})},{id:`duplicates`,label:`Duplicates`,icon:(0,G.jsx)(Vs,{className:`w-4 h-4`})}];function LBe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),{hasPermission:r,hasAnyPermission:i}=jd(),a=(0,y.useRef)(null),[o,s]=(0,y.useState)(``),[c,l]=(0,y.useState)(()=>{let e=localStorage.getItem(`archiveFilterPrinter`);return e?Number(e):null}),[u,d]=(0,y.useState)(()=>localStorage.getItem(`archiveFilterMaterial`)),[f,p]=(0,y.useState)(()=>{let e=localStorage.getItem(`archiveFilterColors`);return e?new Set(JSON.parse(e)):new Set}),[m,h]=(0,y.useState)(()=>localStorage.getItem(`archiveColorFilterMode`)||`or`),[g,_]=(0,y.useState)(()=>localStorage.getItem(`archiveFilterFavorites`)===`true`),[v,b]=(0,y.useState)(()=>localStorage.getItem(`archiveHideFailed`)===`true`),[x,S]=(0,y.useState)(()=>localStorage.getItem(`archiveHideDuplicates`)===`true`),[C,w]=(0,y.useState)(()=>localStorage.getItem(`archiveFilterTag`)),[T,E]=(0,y.useState)(()=>localStorage.getItem(`archiveFilterFileType`)||`all`),[D,O]=(0,y.useState)(!1),[k,A]=(0,y.useState)([]),[j,M]=(0,y.useState)(new Set),[N,P]=(0,y.useState)(()=>localStorage.getItem(`archiveNo3MFWarningDismissed`)===`true`),{data:F}=K({queryKey:[`archives`,`no-3mf-warning`],queryFn:Z.getNo3MFWarning,staleTime:300*1e3,enabled:!N}),I=()=>{localStorage.setItem(`archiveNo3MFWarningDismissed`,`true`),P(!0)},L=F?.reason===`ftps_cooloff`?`FtpsCooloff`:F?.reason===`ftp_transfer_failed`?`FtpTransferFailed`:F?.reason===`internal_storage`?`InternalStorage`:F?.reason===`no_external_storage`?`NoExternalStorage`:F?.reason===`internal_history`?`InternalHistory`:``,R=F?.reason===`ftps_cooloff`?`https://wiki.bambuddy.cool/reference/troubleshooting/#ftps-tls-failure`:F?.reason===`ftp_transfer_failed`?`https://wiki.bambuddy.cool/reference/troubleshooting/#ftp-transfer-timed-out`:F?.reason===`internal_storage`?`https://wiki.bambuddy.cool/reference/troubleshooting/#archive-card-has-only-a-name`:F?.reason===`no_external_storage`?null:F?.reason===`internal_history`?`https://wiki.bambuddy.cool/reference/troubleshooting/#print-started-on-the-printer-has-no-thumbnail`:`https://wiki.bambuddy.cool/getting-started/#step-4-enable-store-sent-files-on-external-storage`,[z,B]=(0,y.useState)(!1),[V,ee]=(0,y.useState)(!1),[te,ne]=(0,y.useState)(!1),[re,ie]=(0,y.useState)(!1),[ae,oe]=(0,y.useState)(()=>localStorage.getItem(`archiveViewMode`)||`grid`),[se,H]=(0,y.useState)(()=>localStorage.getItem(`archiveSortBy`)||`date-desc`),[ce,le]=(0,y.useState)(()=>localStorage.getItem(`archiveCollection`)||`all`),[ue,de]=(0,y.useState)(0),[fe,pe]=(0,y.useState)(()=>{try{let e=localStorage.getItem(`archivePageSize`);return e?Number(e):50}catch{return 50}}),[me,he]=(0,y.useState)(!1),[ge,_e]=(0,y.useState)(!1),[ve,ye]=(0,y.useState)(!1),[be,xe]=(0,y.useState)(!1),[Se,Ce]=(0,y.useState)(!1),[we,Te]=(0,y.useState)(null),[Ee,De]=(0,y.useState)(null),[Oe,ke]=(0,y.useState)(()=>localStorage.getItem(`logFilterUser`)||null),[Ae,je]=(0,y.useState)(()=>localStorage.getItem(`logFilterStatus`)),[Me,Ne]=(0,y.useState)(()=>localStorage.getItem(`logFilterDateFrom`)||``),[Pe,Fe]=(0,y.useState)(()=>localStorage.getItem(`logFilterDateTo`)||``),[Ie,Le]=(0,y.useState)(()=>{let e=localStorage.getItem(`logOffset`);return e?Number(e):0}),[Re,ze]=(0,y.useState)(!1),[Be,Ve]=(0,y.useState)(null),[He,Ue]=(0,y.useState)(null),[We,Ge]=(0,y.useState)(``),[Ke,qe]=(0,y.useState)(``),[Je,Ye]=(0,y.useState)(()=>{let e=localStorage.getItem(`logPageSize`);return e?Number(e):25}),[Xe,Ze]=(0,y.useState)(OBe),[Qe,$e]=(0,y.useState)(!1),[et,tt]=(0,y.useState)(ABe),nt=(0,y.useMemo)(()=>Xe.filter(e=>e.visible).map(e=>e.id),[Xe]),rt=(0,y.useCallback)(e=>{De(e),Te(e)},[]);(0,y.useEffect)(()=>{if(we){let t=setTimeout(()=>{let t=document.querySelector(`[data-archive-id="${we}"]`);t?t.scrollIntoView({behavior:`smooth`,block:`center`}):Ee===we&&n(e(`archives.originalPrintNotVisible`),`warning`),Ee===we&&De(null)},100),r=setTimeout(()=>Te(null),5e3);return()=>{clearTimeout(t),clearTimeout(r)}}},[we,Ee,n,e]);let{data:it,isLoading:at}=K({queryKey:[`archives`,c],queryFn:()=>Z.getArchives(c||void 0)}),{data:ot}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:st}=K({queryKey:[`projects`],queryFn:()=>Z.getProjects()}),{data:ct}=K({queryKey:[`settings`],queryFn:Z.getSettings}),{data:lt}=K({queryKey:[`users`,`slim`],queryFn:Z.getUsersSlim,enabled:ae===`log`}),{data:ut,isLoading:dt}=K({queryKey:[`print-log`,c,Oe,Ae,Me,Pe,o,Ie,Je,et.column,et.direction],queryFn:()=>Z.getPrintLog({search:o||void 0,printerId:c||void 0,username:Oe||void 0,status:Ae||void 0,dateFrom:Me||void 0,dateTo:Pe||void 0,limit:Je,offset:Ie,sortBy:et.column,sortDir:et.direction}),enabled:ae===`log`}),ft=ct?.time_format||`system`,pt=qG(ct?.open_in_slicer,ct?.preferred_slicer),mt=ct?.use_slicer_api??!1,ht=Pf(ct?.currency||`USD`),gt=(0,y.useMemo)(()=>Xe.map(t=>({...t,label:e(Y4[t.id]??t.id)})),[Xe,e]),_t=(0,y.useMemo)(()=>X4.map(t=>({...t,label:e(Y4[t.id]??t.id)})),[e]),vt=(0,y.useCallback)(e=>{Q4.has(e)&&(tt(t=>{let n=t.column===e?{column:e,direction:t.direction===`asc`?`desc`:`asc`}:{column:e,direction:[`date`,`completed_at`,`duration`,`filament_used`,`cost`,`energy`,`energy_cost`].includes(e)?`desc`:`asc`};return jBe(n),n}),Le(0))},[]),yt=(0,y.useCallback)(e=>{let t=e.map(e=>({id:e.id,visible:e.visible}));Ze(t),MBe(t)},[]),bt=(0,y.useMemo)(()=>new Set([`duration`,`filament_used`,`cost`,`energy`,`energy_cost`]),[]),xt=(0,y.useCallback)((t,n)=>{switch(t){case`date`:return(0,G.jsx)(`span`,{className:`text-white whitespace-nowrap`,children:rp(n.started_at||n.created_at,ft)});case`completed_at`:return(0,G.jsx)(`span`,{className:`text-bambu-gray-light whitespace-nowrap`,children:n.completed_at?rp(n.completed_at,ft):`—`});case`print_name`:return(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[n.thumbnail_path&&(0,G.jsx)(`img`,{src:Z.getPrintLogThumbnail(n.id),alt:``,className:`w-8 h-8 rounded object-cover flex-shrink-0`,onError:e=>{e.target.style.display=`none`}}),(0,G.jsx)(`span`,{className:`text-white break-words`,title:n.print_name||``,children:n.print_name||`—`})]});case`printer`:return(0,G.jsx)(`span`,{className:`text-bambu-gray-light`,children:n.printer_name||`—`});case`user`:return(0,G.jsx)(`span`,{className:`text-bambu-gray-light`,children:n.created_by_username||`—`});case`status`:return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{className:`inline-flex items-center px-2 py-0.5 rounded-full text-xs font-medium ${n.status===`completed`?`bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-400`:n.status===`failed`?`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`:n.status===`stopped`?`bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`:n.status===`cancelled`?`bg-orange-100 dark:bg-orange-500/20 text-orange-700 dark:text-orange-400`:n.status===`skipped`?`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`:`bg-gray-500/20 text-gray-400`}`,children:n.status}),n.failure_reason&&(0,G.jsx)(`span`,{className:`block text-[10px] text-bambu-gray mt-0.5`,children:e(`editArchive.failureReasons.${n.failure_reason}`,{defaultValue:n.failure_reason})})]});case`duration`:return(0,G.jsx)(`span`,{className:`text-bambu-gray-light whitespace-nowrap`,children:n.duration_seconds?op(n.duration_seconds):`—`});case`filament`:return(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[n.filament_color&&(0,G.jsx)(`div`,{className:`flex items-center gap-0.5 flex-wrap`,children:n.filament_color.split(`,`).map((e,t)=>{let n=e.trim();return(0,G.jsx)(`span`,{className:`w-3 h-3 rounded-full border border-black/20 flex-shrink-0`,style:{backgroundColor:n.startsWith(`#`)?n:void 0},title:n},t)})}),(0,G.jsx)(`span`,{className:`text-bambu-gray-light text-xs`,children:n.filament_type||`—`})]});case`filament_used`:return(0,G.jsx)(`span`,{className:`text-bambu-gray-light whitespace-nowrap tabular-nums`,children:n.filament_used_grams==null?`—`:`${n.filament_used_grams.toFixed(1)} g`});case`cost`:return(0,G.jsx)(`span`,{className:`text-bambu-gray-light whitespace-nowrap tabular-nums`,children:n.cost==null?`—`:`${ht}${n.cost.toFixed(2)}`});case`energy`:return(0,G.jsx)(`span`,{className:`text-bambu-gray-light whitespace-nowrap tabular-nums`,children:n.energy_kwh==null?`—`:`${n.energy_kwh.toFixed(2)} kWh`});case`energy_cost`:return(0,G.jsx)(`span`,{className:`text-bambu-gray-light whitespace-nowrap tabular-nums`,children:n.energy_cost==null?`—`:`${ht}${n.energy_cost.toFixed(2)}`});default:return null}},[ht,e,ft]),St=q({mutationFn:async e=>(await Promise.all(e.map(e=>Z.deleteArchive(e))),e.length),onSuccess:e=>{QG(t),M(new Set),n(`${e} archive${e===1?``:`s`} deleted`)},onError:()=>{n(e(`archives.toast.failedDeleteArchives`),`error`)}}),Ct=q({mutationFn:()=>Z.clearPrintLog(),onSuccess:r=>{t.invalidateQueries({queryKey:[`print-log`]}),Le(0),n(e(`archives.log.cleared`,{count:r.deleted}))},onError:()=>{n(e(`archives.log.clearFailed`),`error`)}}),wt=q({mutationFn:e=>Z.deletePrintLogEntry(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`print-log`]}),t.invalidateQueries({queryKey:[`archives-stats`]}),n(e(`archives.log.entryDeleted`))},onError:()=>{n(e(`archives.log.entryDeleteFailed`),`error`)}}),Tt=q({mutationFn:({id:e,body:t})=>Z.updatePrintLogEntry(e,t),onSuccess:()=>{t.invalidateQueries({queryKey:[`print-log`]}),t.invalidateQueries({queryKey:[`archives-stats`]}),Ue(null),n(e(`archives.log.entryUpdated`))},onError:()=>{n(e(`archives.log.entryUpdateFailed`),`error`)}});(0,y.useEffect)(()=>{c===null?localStorage.removeItem(`archiveFilterPrinter`):localStorage.setItem(`archiveFilterPrinter`,c.toString())},[c]),(0,y.useEffect)(()=>{u?localStorage.setItem(`archiveFilterMaterial`,u):localStorage.removeItem(`archiveFilterMaterial`)},[u]),(0,y.useEffect)(()=>{localStorage.setItem(`archiveFilterColors`,JSON.stringify([...f]))},[f]),(0,y.useEffect)(()=>{localStorage.setItem(`archiveColorFilterMode`,m)},[m]),(0,y.useEffect)(()=>{localStorage.setItem(`archiveFilterFavorites`,g.toString())},[g]),(0,y.useEffect)(()=>{localStorage.setItem(`archiveHideFailed`,v.toString())},[v]),(0,y.useEffect)(()=>{localStorage.setItem(`archiveHideDuplicates`,x.toString())},[x]),(0,y.useEffect)(()=>{C?localStorage.setItem(`archiveFilterTag`,C):localStorage.removeItem(`archiveFilterTag`)},[C]),(0,y.useEffect)(()=>{localStorage.setItem(`archiveFilterFileType`,T)},[T]),(0,y.useEffect)(()=>{de(0)},[o,c,u,f,m,g,v,x,C,T,se,ce]),(0,y.useEffect)(()=>{try{localStorage.setItem(`archivePageSize`,String(fe))}catch{}},[fe]),(0,y.useEffect)(()=>{localStorage.setItem(`archiveViewMode`,ae)},[ae]),(0,y.useEffect)(()=>{localStorage.setItem(`archiveSortBy`,se)},[se]),(0,y.useEffect)(()=>{localStorage.setItem(`archiveCollection`,ce)},[ce]),(0,y.useEffect)(()=>{Oe?localStorage.setItem(`logFilterUser`,Oe):localStorage.removeItem(`logFilterUser`)},[Oe]),(0,y.useEffect)(()=>{Ae?localStorage.setItem(`logFilterStatus`,Ae):localStorage.removeItem(`logFilterStatus`)},[Ae]),(0,y.useEffect)(()=>{Me?localStorage.setItem(`logFilterDateFrom`,Me):localStorage.removeItem(`logFilterDateFrom`)},[Me]),(0,y.useEffect)(()=>{Pe?localStorage.setItem(`logFilterDateTo`,Pe):localStorage.removeItem(`logFilterDateTo`)},[Pe]),(0,y.useEffect)(()=>{localStorage.setItem(`logOffset`,Ie.toString())},[Ie]),(0,y.useEffect)(()=>{localStorage.setItem(`logPageSize`,Je.toString())},[Je]);let Et=(0,y.useMemo)(()=>new Map(ot?.map(e=>[e.id,e.name])||[]),[ot]),Dt=[...new Set(it?.flatMap(e=>e.filament_type?.split(`, `)||[]).filter(Boolean)||[])].sort(),Ot=[...new Set(it?.flatMap(e=>e.filament_color?.split(`,`)||[]).filter(Boolean)||[])],kt=[...new Set(it?.flatMap(e=>e.tags?.split(`,`).map(e=>e.trim())||[]).filter(Boolean)||[])].sort(),At=it?.filter(e=>{let t=new Date,n=ep(e.created_at)||new Date(0),r=!0;switch(ce){case`recent`:r=t.getTime()-n.getTime()<1440*60*1e3;break;case`this-week`:r=t.getTime()-n.getTime()<10080*60*1e3;break;case`this-month`:r=n.getMonth()===t.getMonth()&&n.getFullYear()===t.getFullYear();break;case`favorites`:r=e.is_favorite===!0;break;case`not-printed`:r=e.status===`archived`;break;case`printed`:r=FBe.includes(e.status);break;case`failed`:r=e.status===`failed`||e.status===`aborted`;break;case`duplicates`:r=e.duplicate_count>0;break}let i=(e.print_name||e.filename).toLowerCase().includes(o.toLowerCase()),a=!u||e.filament_type?.split(`, `).includes(u),s=e.filament_color?.split(`,`)||[],c=f.size===0||(m===`or`?s.some(e=>f.has(e)):[...f].every(e=>s.includes(e))),l=ce===`favorites`||!g||e.is_favorite,d=ce===`failed`||!v||e.status!==`failed`&&e.status!==`aborted`,p=ce===`duplicates`||!x||e.duplicate_count===0||e.duplicate_sequence===0,h=e.tags?.split(`,`).map(e=>e.trim())||[],_=!C||h.includes(C),y=$4(e);return r&&i&&a&&c&&l&&d&&p&&_&&(T===`all`||T===`gcode`&&y||T===`source`&&!y)}).sort((e,t)=>{switch(se){case`date-desc`:return(ep(t.created_at)?.getTime()||0)-(ep(e.created_at)?.getTime()||0);case`date-asc`:return(ep(e.created_at)?.getTime()||0)-(ep(t.created_at)?.getTime()||0);case`name-asc`:return(e.print_name||e.filename).localeCompare(t.print_name||t.filename);case`name-desc`:return(t.print_name||t.filename).localeCompare(e.print_name||e.filename);case`size-desc`:return t.file_size-e.file_size;case`size-asc`:return e.file_size-t.file_size;default:return 0}}),jt=At?.length||0,Mt=fe===-1,Nt=Mt?jt||1:fe,Pt=Math.max(1,Math.ceil(jt/Nt)),Ft=Mt?At:At?.slice(ue*Nt,(ue+1)*Nt);(0,y.useEffect)(()=>{if(we&&At&&!Mt){let e=At.findIndex(e=>e.id===we);if(e>=0){let t=Math.floor(e/Nt);t!==ue&&de(t)}}},[we]);let It=z||j.size>0,Lt=e=>{M(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},Rt=()=>{At&&M(new Set(At.map(e=>e.id)))},zt=()=>{M(new Set),B(!1)},Bt=e=>{p(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},Vt=()=>{p(new Set)},Ht=()=>{s(``),l(null),d(null),_(!1),b(!1),S(!1),w(null),E(`all`)},Ut=o||c||u||g||v||x||C||T!==`all`,{isDraggingOver:Wt,dragHandlers:Gt}=eK({disabled:D,extensions:[`.3mf`],onFiles:e=>{A(e),O(!0)},onRejected:()=>n(e(`archives.page.only3mfSupported`),`warning`)}),Kt=(0,y.useCallback)(e=>{let t=e.target;if(t.tagName===`INPUT`||t.tagName===`TEXTAREA`||t.isContentEditable){e.key===`Escape`&&t.blur();return}switch(e.key){case`/`:e.preventDefault(),a.current?.focus();break;case`u`:case`U`:!e.metaKey&&!e.ctrlKey&&(e.preventDefault(),O(!0));break;case`Escape`:It&&zt();break}},[It]);return(0,y.useEffect)(()=>(document.addEventListener(`keydown`,Kt),()=>document.removeEventListener(`keydown`,Kt)),[Kt]),(0,G.jsxs)(`div`,{className:`p-4 md:p-8 relative`,...Gt,children:[Wt&&(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 bg-bambu-dark/90 flex items-center justify-center pointer-events-none`,children:(0,G.jsxs)(`div`,{className:`border-4 border-dashed border-bambu-green rounded-xl p-12 text-center`,children:[(0,G.jsx)(Bu,{className:`w-16 h-16 mx-auto mb-4 text-bambu-green`}),(0,G.jsx)(`p`,{className:`text-2xl font-semibold text-white mb-2`,children:e(`archives.page.dropFilesHere`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`archives.releaseToUpload`)})]})}),It&&(0,G.jsxs)(`div`,{className:`fixed bottom-6 left-1/2 -translate-x-1/2 z-40 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl px-4 py-3 flex items-center gap-4`,children:[(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:zt,children:[(0,G.jsx)(td,{className:`w-4 h-4`}),`Close`]}),(0,G.jsx)(`div`,{className:`w-px h-6 bg-bambu-dark-tertiary`}),(0,G.jsxs)(`span`,{className:`text-white font-medium`,children:[j.size,` selected`]}),(0,G.jsx)(`div`,{className:`w-px h-6 bg-bambu-dark-tertiary`}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:Rt,children:`Select All`}),(0,G.jsx)(`div`,{className:`w-px h-6 bg-bambu-dark-tertiary`}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>ne(!0),disabled:!i(`archives:update_own`,`archives:update_all`),title:i(`archives:update_own`,`archives:update_all`)?void 0:e(`archives.permission.noUpdateArchives`),children:[(0,G.jsx)(Tu,{className:`w-4 h-4`}),`Tags`]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>ie(!0),disabled:!i(`archives:update_own`,`archives:update_all`),title:i(`archives:update_own`,`archives:update_all`)?void 0:e(`archives.permission.noUpdateArchives`),children:[(0,G.jsx)(gc,{className:`w-4 h-4`}),`Project`]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,disabled:!i(`archives:update_own`,`archives:update_all`),title:i(`archives:update_own`,`archives:update_all`)?void 0:e(`archives.permission.noUpdateArchives`),onClick:()=>{let r=Array.from(j);Promise.all(r.map(e=>Z.toggleFavorite(e))).then(()=>{t.invalidateQueries({queryKey:[`archives`]}),n(`Toggled favorites for ${r.length} archive${r.length===1?``:`s`}`)}).catch(()=>{n(e(`archives.toast.failedUpdateFavorites`),`error`)})},children:[(0,G.jsx)(bu,{className:`w-4 h-4`}),`Favorite`]}),(0,G.jsxs)(Q,{size:`sm`,className:`bg-red-500 hover:bg-red-600`,onClick:()=>ee(!0),disabled:!i(`archives:delete_own`,`archives:delete_all`),title:i(`archives:delete_own`,`archives:delete_all`)?void 0:e(`archives.permission.noDelete`),children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),`Delete`]})]}),F?.has_fallback&&!N&&(0,G.jsxs)(`div`,{className:`mb-6 rounded-lg border border-amber-300 dark:border-amber-500/30 bg-amber-50 dark:bg-amber-500/10 px-4 py-3 flex items-start gap-3`,children:[(0,G.jsx)(ys,{className:`w-5 h-5 text-amber-600 dark:text-amber-400 flex-shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-sm font-medium text-amber-900 dark:text-amber-200`,children:e(`archives.no3mfBanner.title${L}`)}),(0,G.jsxs)(`div`,{className:`text-xs text-amber-800/90 dark:text-amber-200/80 mt-1`,children:[e(`archives.no3mfBanner.body${L}`),R&&(0,G.jsxs)(G.Fragment,{children:[` `,(0,G.jsxs)(`a`,{href:R,target:`_blank`,rel:`noreferrer`,className:`underline hover:text-amber-900 dark:hover:text-amber-100 inline-flex items-center gap-1`,children:[e(F?.reason===`internal_storage`||F?.reason===`internal_history`||F?.reason===`ftps_cooloff`||F?.reason===`ftp_transfer_failed`?`archives.no3mfBanner.docsLinkInternalStorage`:`archives.no3mfBanner.docsLink`),(0,G.jsx)(nc,{className:`w-3 h-3`})]})]})]})]}),(0,G.jsx)(`button`,{onClick:I,className:`text-amber-800/70 dark:text-amber-200/60 hover:text-amber-900 dark:hover:text-amber-200 flex-shrink-0 p-1 -m-1`,title:e(`archives.no3mfBanner.dismissLabel`),"aria-label":e(`archives.no3mfBanner.dismissLabel`),children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}),(0,G.jsxs)(`div`,{className:`flex flex-col sm:flex-row sm:items-center sm:justify-between gap-4 mb-8`,children:[(0,G.jsx)(`div`,{children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(Po,{className:`w-7 h-7 text-bambu-green`}),`Archives`]}),(0,G.jsxs)(`p`,{className:`text-bambu-gray mt-1`,children:[At?.length||0,` of `,it?.length||0,` prints`]})]}),(0,G.jsx)(`select`,{className:`mt-0.5 px-3 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray-light text-sm focus:border-bambu-green focus:outline-none`,value:ce,onChange:e=>le(e.target.value),children:IBe.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.label},e.id))})]})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 sm:gap-3 flex-wrap`,children:[(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>he(!me),disabled:ge,children:[ge?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(uc,{className:`w-4 h-4`}),`Export`]}),me&&(0,G.jsxs)(`div`,{className:`absolute right-0 top-full mt-1 w-48 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl z-20`,children:[(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-white hover:bg-bambu-dark-tertiary transition-colors flex items-center gap-2 rounded-t-lg`,onClick:async()=>{he(!1),_e(!0);try{let{blob:t,filename:r}=await Z.exportArchives({format:`csv`,printerId:c||void 0,status:ce===`failed`?`failed`:void 0,search:o||void 0}),i=URL.createObjectURL(t),a=document.createElement(`a`);a.href=i,a.download=r,a.click(),URL.revokeObjectURL(i),n(e(`archives.toast.exportDownloaded`))}catch{n(e(`archives.toast.exportFailed`),`error`)}finally{_e(!1)}},children:[(0,G.jsx)(dc,{className:`w-4 h-4`}),`Export as CSV`]}),(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-white hover:bg-bambu-dark-tertiary transition-colors flex items-center gap-2 rounded-b-lg`,onClick:async()=>{he(!1),_e(!0);try{let{blob:t,filename:r}=await Z.exportArchives({format:`xlsx`,printerId:c||void 0,status:ce===`failed`?`failed`:void 0,search:o||void 0}),i=URL.createObjectURL(t),a=document.createElement(`a`);a.href=i,a.download=r,a.click(),URL.revokeObjectURL(i),n(e(`archives.toast.exportDownloaded`))}catch{n(e(`archives.toast.exportFailed`),`error`)}finally{_e(!1)}},children:[(0,G.jsx)(uc,{className:`w-4 h-4`}),`Export as Excel`]})]})]}),j.size>=2&&j.size<=5&&(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>ye(!0),children:[(0,G.jsx)(Dc,{className:`w-4 h-4`}),`Compare (`,j.size,`)`]}),!It&&(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>B(!0),children:[(0,G.jsx)(_u,{className:`w-4 h-4`}),`Select`]}),(0,G.jsxs)(Q,{onClick:()=>O(!0),disabled:!r(`archives:create`),title:r(`archives:create`)?void 0:e(`archives.permission.noCreate`),children:[(0,G.jsx)(Bu,{className:`w-4 h-4`}),`Upload 3MF`]}),r(`archives:purge`)&&(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>Ce(!0),title:e(`archivePurge.headerTooltip`),children:[(0,G.jsx)(Nu,{className:`w-4 h-4 mr-2`}),e(`archivePurge.headerButton`)]})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center border border-bambu-dark-tertiary rounded-lg overflow-hidden flex-shrink-0 w-fit mb-4`,children:[(0,G.jsx)(`button`,{className:`p-2 ${ae===`grid`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,onClick:()=>oe(`grid`),title:e(`archives.gridView`),children:(0,G.jsx)(Jc,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{className:`p-2 ${ae===`list`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,onClick:()=>oe(`list`),title:e(`archives.listView`),children:(0,G.jsx)($c,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{className:`p-2 ${ae===`calendar`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,onClick:()=>oe(`calendar`),title:e(`archives.calendarView`),children:(0,G.jsx)(is,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{className:`p-2 ${ae===`log`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,onClick:()=>oe(`log`),title:e(`archives.logView`),children:(0,G.jsx)(ks,{className:`w-4 h-4`})})]}),ae!==`log`&&(0,G.jsx)(Ld,{className:`mb-6`,children:(0,G.jsxs)(zd,{className:`py-4`,children:[(0,G.jsxs)(`div`,{className:`flex flex-col md:flex-row gap-3 md:gap-4 md:items-center md:flex-wrap`,children:[(0,G.jsxs)(`div`,{className:`w-full md:flex-1 relative md:min-w-[200px]`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{ref:a,type:`text`,placeholder:e(`archives.searchPlaceholder`),className:`w-full pl-10 pr-4 py-3 md:py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:o,onChange:e=>s(e.target.value)})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 md:gap-4 overflow-x-auto pb-1 md:pb-0 -mx-4 px-4 md:mx-0 md:px-0 md:flex-wrap scrollbar-hide`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-shrink-0`,children:[(0,G.jsx)(Cc,{className:`w-4 h-4 text-bambu-gray hidden md:block`}),(0,G.jsxs)(`select`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:c||``,onChange:e=>l(e.target.value?Number(e.target.value):null),children:[(0,G.jsx)(`option`,{value:``,children:`All Printers`}),ot?.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-shrink-0`,children:[(0,G.jsx)(Sl,{className:`w-4 h-4 text-bambu-gray hidden md:block`}),(0,G.jsxs)(`select`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:u||``,onChange:e=>d(e.target.value||null),children:[(0,G.jsx)(`option`,{value:``,children:`All Materials`}),Dt.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-shrink-0`,children:[(0,G.jsx)(sc,{className:`w-4 h-4 text-bambu-gray hidden md:block`}),(0,G.jsxs)(`select`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:T,onChange:e=>E(e.target.value),children:[(0,G.jsx)(`option`,{value:`all`,children:`All Files`}),(0,G.jsx)(`option`,{value:`gcode`,children:`Sliced (GCODE)`}),(0,G.jsx)(`option`,{value:`source`,children:`Source Only`})]})]}),(0,G.jsxs)(`button`,{onClick:()=>_(!g),className:`flex items-center gap-2 px-3 py-2 rounded-lg border transition-colors flex-shrink-0 ${g?`bg-yellow-100 dark:bg-yellow-500/20 border-yellow-500 text-yellow-700 dark:text-yellow-400`:`bg-bambu-dark border-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,title:e(g?`archives.showAll`:`archives.showFavoritesOnly`),children:[(0,G.jsx)(bu,{className:`w-4 h-4 ${g?`fill-yellow-400`:``}`}),(0,G.jsx)(`span`,{className:`text-sm hidden md:inline`,children:`Favorites`})]}),(0,G.jsxs)(`button`,{onClick:()=>b(!v),className:`flex items-center gap-2 px-3 py-2 rounded-lg border transition-colors flex-shrink-0 ${v?`bg-red-100 dark:bg-red-500/20 border-red-500 text-red-700 dark:text-red-400`:`bg-bambu-dark border-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,title:e(v?`archives.showFailedPrints`:`archives.hideFailedPrints`),children:[(0,G.jsx)(ys,{className:`w-4 h-4 `}),(0,G.jsx)(`span`,{className:`text-sm hidden md:inline`,children:`Hide Failed`})]}),(0,G.jsxs)(`button`,{onClick:()=>S(!x),className:`flex items-center gap-2 px-3 py-2 rounded-lg border transition-colors flex-shrink-0 ${x?`bg-purple-100 dark:bg-purple-500/20 border-purple-500 text-purple-700 dark:text-purple-400`:`bg-bambu-dark border-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,title:e(`archives.hideDuplicates`),children:[(0,G.jsx)(Vs,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-sm hidden md:inline`,children:e(`archives.hideDuplicates`)})]}),kt.length>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-shrink-0`,children:[(0,G.jsx)(Tu,{className:`w-4 h-4 text-bambu-gray hidden md:block`}),(0,G.jsxs)(`select`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:C||``,onChange:e=>w(e.target.value||null),children:[(0,G.jsx)(`option`,{value:``,children:`All Tags`}),kt.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]}),(0,G.jsx)(`button`,{onClick:()=>xe(!0),className:`p-2 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary text-bambu-gray hover:text-white hover:border-bambu-green transition-colors`,title:e(`archives.manageTags`),children:(0,G.jsx)(nu,{className:`w-4 h-4`})})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-shrink-0`,children:[(0,G.jsx)(Bo,{className:`w-4 h-4 text-bambu-gray hidden md:block`}),(0,G.jsxs)(`select`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:se,onChange:e=>H(e.target.value),children:[(0,G.jsx)(`option`,{value:`date-desc`,children:e(`archives.sortNewest`)}),(0,G.jsx)(`option`,{value:`date-asc`,children:e(`archives.sortOldest`)}),(0,G.jsxs)(`option`,{value:`name-asc`,children:[e(`archives.sortName`),` A-Z`]}),(0,G.jsxs)(`option`,{value:`name-desc`,children:[e(`archives.sortName`),` Z-A`]}),(0,G.jsx)(`option`,{value:`size-desc`,children:e(`archives.sortLargest`)}),(0,G.jsx)(`option`,{value:`size-asc`,children:e(`archives.sortSmallest`)})]})]})]}),Ut&&(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:Ht,className:`text-bambu-gray hover:text-white`,children:[(0,G.jsx)(td,{className:`w-4 h-4`}),`Reset`]})]}),Ot.length>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mt-4 pt-4 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`Colors:`}),f.size>1&&(0,G.jsx)(`button`,{onClick:()=>h(e=>e===`or`?`and`:`or`),className:`px-2 py-0.5 text-xs rounded transition-colors ${m===`and`?`bg-bambu-green text-white`:`bg-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,title:m===`or`?`Match ANY selected color`:`Match ALL selected colors`,children:m.toUpperCase()}),(0,G.jsx)(`div`,{className:`flex items-center gap-1.5 flex-wrap`,children:Ot.map(e=>(0,G.jsx)(`button`,{onClick:()=>Bt(e),className:`w-6 h-6 rounded-full border-2 transition-all ${f.has(e)?`border-bambu-green scale-110`:`border-white/20 hover:border-white/40`}`,style:{backgroundColor:e},title:e},e))}),f.size>0&&(0,G.jsxs)(`button`,{onClick:Vt,className:`text-xs text-bambu-gray hover:text-white flex items-center gap-1`,children:[(0,G.jsx)(td,{className:`w-3 h-3`}),`Clear`]})]})]})}),(0,G.jsx)(EBe,{}),at?(0,G.jsx)(`div`,{className:`text-center py-12 text-bambu-gray`,children:e(`archives.loadingArchives`)}):At?.length===0&&ae!==`log`?(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`text-center py-12`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(o?`archives.noArchivesSearch`:`archives.noArchivesYet`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-2`,children:`Archives are created automatically when prints complete`})]})}):ae===`calendar`?(0,G.jsx)(Ld,{className:`p-6`,children:(0,G.jsx)(kAe,{archives:At||[],onArchiveClick:e=>{s(``),oe(`grid`),Te(e.id)},highlightedArchiveId:we})}):ae===`grid`?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 lg:grid-cols-3 xl:grid-cols-4 gap-6`,children:Ft?.map(t=>(0,G.jsx)(NBe,{archive:t,printerName:t.printer_id?Et.get(t.printer_id)||`Unknown`:t.sliced_for_model||`No Printer`,printerMap:Et,isSelected:j.has(t.id),onSelect:Lt,selectionMode:It,projects:st,isHighlighted:t.id===we,timeFormat:ft,preferredSlicer:pt,useSlicerApi:mt,currency:ht,t:e,onNavigateToArchive:rt},t.id))}),(0,G.jsx)(t3,{pageIndex:ue,pageSize:fe,totalRows:jt,totalPages:Pt,onPageChange:de,onPageSizeChange:e=>{pe(e),de(0)},t:e})]}):ae===`list`?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ld,{children:(0,G.jsxs)(`div`,{className:`divide-y divide-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-12 gap-4 px-4 py-3 text-xs text-bambu-gray font-medium`,children:[(0,G.jsx)(`div`,{className:`col-span-1`}),(0,G.jsx)(`div`,{className:`col-span-4`,children:`Name`}),(0,G.jsx)(`div`,{className:`col-span-2`,children:`Printer`}),(0,G.jsx)(`div`,{className:`col-span-2`,children:`Date`}),(0,G.jsx)(`div`,{className:`col-span-1`,children:`Size`}),(0,G.jsx)(`div`,{className:`col-span-2 text-right`,children:`Actions`})]}),Ft?.map(t=>(0,G.jsx)(PBe,{archive:t,printerName:t.printer_id?Et.get(t.printer_id)||`Unknown`:t.sliced_for_model||`No Printer`,isSelected:j.has(t.id),onSelect:Lt,selectionMode:It,projects:st,isHighlighted:t.id===we,preferredSlicer:pt,useSlicerApi:mt,t:e,onNavigateToArchive:rt},t.id))]})}),(0,G.jsx)(t3,{pageIndex:ue,pageSize:fe,totalRows:jt,totalPages:Pt,onPageChange:de,onPageSizeChange:e=>{pe(e),de(0)},t:e})]}):ae===`log`?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-3`,children:(0,G.jsxs)(`div`,{className:`flex flex-col md:flex-row gap-3 md:items-center md:flex-wrap`,children:[(0,G.jsxs)(`div`,{className:`flex-1 relative md:min-w-[200px]`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,placeholder:e(`archives.searchPlaceholder`),className:`w-full pl-10 pr-4 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,value:o,onChange:e=>{s(e.target.value),Le(0)}})]}),(0,G.jsxs)(`select`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,value:c||``,onChange:e=>{l(e.target.value?Number(e.target.value):null),Le(0)},children:[(0,G.jsx)(`option`,{value:``,children:e(`archives.log.allPrinters`)}),ot?.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]}),(0,G.jsxs)(`select`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,value:Oe||``,onChange:e=>{ke(e.target.value||null),Le(0)},children:[(0,G.jsx)(`option`,{value:``,children:e(`archives.log.allUsers`)}),lt?.map(e=>(0,G.jsx)(`option`,{value:e.username,children:e.username},e.id))]}),(0,G.jsxs)(`select`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,value:Ae||``,onChange:e=>{je(e.target.value||null),Le(0)},children:[(0,G.jsx)(`option`,{value:``,children:e(`archives.log.allStatuses`)}),(0,G.jsx)(`option`,{value:`completed`,children:e(`archives.status.completed`)}),(0,G.jsx)(`option`,{value:`failed`,children:e(`archives.status.failed`)}),(0,G.jsx)(`option`,{value:`stopped`,children:e(`archives.status.stopped`)}),(0,G.jsx)(`option`,{value:`cancelled`,children:e(`archives.log.cancelled`)}),(0,G.jsx)(`option`,{value:`skipped`,children:e(`archives.log.skipped`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`label`,{className:`text-sm text-bambu-gray`,children:e(`archives.log.dateFrom`)}),(0,G.jsx)(`input`,{type:`date`,className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,value:Me,onChange:e=>{Ne(e.target.value),Le(0)}})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`label`,{className:`text-sm text-bambu-gray`,children:e(`archives.log.dateTo`)}),(0,G.jsx)(`input`,{type:`date`,className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,value:Pe,onChange:e=>{Fe(e.target.value),Le(0)}})]}),(0,G.jsxs)(`div`,{className:`ml-auto flex items-center gap-2`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>$e(!0),className:`flex items-center gap-1.5 px-3 py-1.5 text-sm font-medium text-bambu-gray border border-bambu-dark-tertiary rounded-lg hover:bg-bambu-dark-tertiary transition-colors`,title:e(`inventory.configureColumns`),children:[(0,G.jsx)(zs,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`archives.log.columns`)})]}),(0,G.jsxs)(Q,{variant:`danger`,size:`sm`,onClick:()=>ze(!0),disabled:!r(`archives:delete_all`)||Ct.isPending,children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),e(`archives.log.clearLog`)]})]})]})})}),(0,G.jsx)(Ld,{children:dt?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-12`,children:(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin text-bambu-green`})}):ut?.items.length?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary text-bambu-gray text-left`,children:[nt.map(t=>{let n=Q4.has(t),r=et.column===t,i=e(Y4[t]??t);return(0,G.jsx)(`th`,{scope:`col`,"aria-sort":r?et.direction===`asc`?`ascending`:`descending`:`none`,className:`px-4 py-3 font-medium ${bt.has(t)?`text-right`:``}`,children:n?(0,G.jsxs)(`button`,{type:`button`,onClick:()=>vt(t),className:`inline-flex items-center gap-1 font-medium transition-colors hover:text-bambu-green ${r?`text-bambu-green`:``}`,title:e(`archives.log.sortBy`,{column:i}),children:[i,r?et.direction===`asc`?(0,G.jsx)(gs,{className:`w-3.5 h-3.5`}):(0,G.jsx)(ps,{className:`w-3.5 h-3.5`}):(0,G.jsx)(Bo,{className:`w-3.5 h-3.5 opacity-30`})]}):i},t)}),(0,G.jsx)(`th`,{className:`px-4 py-3 font-medium w-10`,"aria-label":e(`common.actions`)})]})}),(0,G.jsx)(`tbody`,{className:`divide-y divide-bambu-dark-tertiary`,children:ut.items.map(t=>(0,G.jsxs)(`tr`,{className:`hover:bg-bambu-dark-secondary/50`,children:[nt.map(e=>(0,G.jsx)(`td`,{className:`px-4 py-3 ${bt.has(e)?`text-right`:``}`,children:xt(e,t)},e)),(0,G.jsx)(`td`,{className:`px-4 py-3 text-right`,children:(0,G.jsxs)(`div`,{className:`inline-flex items-center gap-2`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>{Ue(t),Ge(t.failure_reason||``),qe(t.status)},disabled:Tt.isPending||!(r(`archives:update_all`)||r(`archives:update_own`)),title:r(`archives:update_all`)||r(`archives:update_own`)?e(`archives.log.editEntryTitle`):e(`archives.permission.noEdit`),className:`text-bambu-gray hover:text-bambu-blue disabled:opacity-40 disabled:hover:text-bambu-gray transition-colors`,children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>Ve(t.id),disabled:wt.isPending||!(r(`archives:delete_all`)||r(`archives:delete_own`)),title:r(`archives:delete_all`)||r(`archives:delete_own`)?e(`archives.log.deleteEntryTitle`):e(`archives.permission.noDelete`),className:`text-bambu-gray hover:text-red-600 dark:hover:text-red-400 disabled:opacity-40 disabled:hover:text-bambu-gray transition-colors`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})})]},t.id))})]})}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-4 py-3 border-t border-bambu-dark-tertiary flex-wrap gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e(`archives.log.showing`,{count:Math.min(Ie+Je,ut.total),total:ut.total})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray`,children:e(`archives.log.rowsPerPage`)}),(0,G.jsxs)(`select`,{className:`px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-xs focus:border-bambu-green focus:outline-none`,value:Je,onChange:e=>{Ye(Number(e.target.value)),Le(0)},children:[(0,G.jsx)(`option`,{value:10,children:`10`}),(0,G.jsx)(`option`,{value:25,children:`25`}),(0,G.jsx)(`option`,{value:50,children:`50`}),(0,G.jsx)(`option`,{value:100,children:`100`})]})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[e(`archives.log.page`),` `,Math.floor(Ie/Je)+1,` / `,Math.max(1,Math.ceil(ut.total/Je))]}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>Le(Math.max(0,Ie-Je)),disabled:Ie===0,children:(0,G.jsx)(hs,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>Le(Ie+Je),disabled:Ie+Je>=ut.total,children:(0,G.jsx)(ms,{className:`w-4 h-4`})})]})]})]}):(0,G.jsx)(`div`,{className:`text-center py-12 text-bambu-gray`,children:e(`archives.log.noEntries`)})})]}):null,D&&(0,G.jsx)(_Ae,{onClose:()=>{O(!1),A([])},initialFiles:k}),Se&&(0,G.jsx)(yAe,{onClose:()=>Ce(!1)}),V&&(0,G.jsx)(rf,{title:e(`archives.modal.deleteArchives`),message:e(`archives.modal.deleteArchivesConfirm`,{count:j.size}),confirmText:e(`archives.modal.deleteCount`,{count:j.size}),variant:`danger`,onConfirm:()=>{St.mutate(Array.from(j)),ee(!1)},onCancel:()=>ee(!1)}),te&&(0,G.jsx)(CAe,{selectedIds:Array.from(j),existingTags:kt,onClose:()=>ne(!1)}),re&&(0,G.jsx)(wAe,{selectedIds:Array.from(j),onClose:()=>ie(!1)}),ve&&j.size>=2&&j.size<=5&&(0,G.jsx)(SBe,{archiveIds:Array.from(j),onClose:()=>{ye(!1),M(new Set),B(!1)}}),be&&(0,G.jsx)(DBe,{onClose:()=>xe(!1)}),(0,G.jsx)(oK,{isOpen:Qe,onClose:()=>$e(!1),columns:gt,defaultColumns:_t,onSave:yt}),Re&&(0,G.jsx)(rf,{title:e(`archives.log.clearLogTitle`),message:e(`archives.log.clearLogConfirm`),confirmText:e(`archives.log.clearLogButton`),variant:`danger`,onConfirm:()=>{Ct.mutate(),ze(!1)},onCancel:()=>ze(!1)}),Be!==null&&(0,G.jsx)(rf,{title:e(`archives.log.deleteEntryTitle`),message:e(`archives.log.deleteEntryConfirm`),confirmText:e(`common.delete`),variant:`danger`,onConfirm:()=>{wt.mutate(Be),Ve(null)},onCancel:()=>Ve(null)}),He!==null&&(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/60 backdrop-blur-sm`,onClick:()=>Ue(null),children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg w-full max-w-md mx-4 p-6`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white mb-4`,children:e(`archives.log.editEntryTitle`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-4`,children:e(`archives.log.editEntryDescription`)}),(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:e(`editArchive.status`)}),(0,G.jsxs)(`select`,{value:Ke,onChange:e=>qe(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`completed`,children:e(`archives.log.statuses.completed`,{defaultValue:`completed`})}),(0,G.jsx)(`option`,{value:`failed`,children:e(`archives.log.statuses.failed`,{defaultValue:`failed`})}),(0,G.jsx)(`option`,{value:`stopped`,children:e(`archives.log.statuses.stopped`,{defaultValue:`stopped`})}),(0,G.jsx)(`option`,{value:`cancelled`,children:e(`archives.log.statuses.cancelled`,{defaultValue:`cancelled`})}),(0,G.jsx)(`option`,{value:`skipped`,children:e(`archives.log.statuses.skipped`,{defaultValue:`skipped`})})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:e(`editArchive.failureReason`)}),(0,G.jsxs)(`select`,{value:We,onChange:e=>Ge(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:``,children:e(`editArchive.selectReason`)}),nK.map(t=>(0,G.jsx)(`option`,{value:t,children:e(`editArchive.failureReasons.${t}`)},t))]})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 mt-6`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>Ue(null),children:e(`common.cancel`)}),(0,G.jsx)(Q,{variant:`primary`,onClick:()=>{let e={};if(We!==(He.failure_reason||``)&&(e.failure_reason=We||null),Ke!==He.status&&(e.status=Ke),Object.keys(e).length===0){Ue(null);return}Tt.mutate({id:He.id,body:e})},disabled:Tt.isPending,children:Tt.isPending?e(`editArchive.saving`):e(`common.save`)})]})]})})]})}function t3({pageIndex:e,pageSize:t,totalRows:n,totalPages:r,onPageChange:i,onPageSizeChange:a,t:o}){let s=t===-1;if(r<=1&&!s)return null;let c=s?n||1:t;return(0,G.jsxs)(`div`,{className:`flex items-center justify-between pt-2 text-sm`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:s?`${n} ${o(`archives.prints`)}`:(0,G.jsxs)(G.Fragment,{children:[o(`archives.pagination.showing`),` `,e*c+1,` `,o(`archives.pagination.to`),` `,Math.min((e+1)*c,n),` `,o(`archives.pagination.of`),` `,n,` `,o(`archives.prints`)]})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:o(`archives.pagination.show`)}),(0,G.jsxs)(`select`,{value:t,onChange:e=>a(Number(e.target.value)),className:`px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:outline-none focus:border-bambu-green`,children:[[25,50,100,200].map(e=>(0,G.jsx)(`option`,{value:e,children:e},e)),(0,G.jsx)(`option`,{value:-1,children:o(`archives.pagination.all`)})]}),!s&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`button`,{onClick:()=>i(0),disabled:e===0,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,children:(0,G.jsx)(_s,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>i(Math.max(0,e-1)),disabled:e===0,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,children:(0,G.jsx)(hs,{className:`w-4 h-4`})}),(0,G.jsxs)(`span`,{className:`text-bambu-gray px-2 whitespace-nowrap`,children:[o(`archives.pagination.page`),` `,e+1,` `,o(`archives.pagination.of`),` `,r]}),(0,G.jsx)(`button`,{onClick:()=>i(Math.min(r-1,e+1)),disabled:e>=r-1,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,children:(0,G.jsx)(ms,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>i(r-1),disabled:e>=r-1,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,children:(0,G.jsx)(vs,{className:`w-4 h-4`})})]})]})]})}function RBe(){var e=[...arguments];return(0,y.useMemo)(()=>t=>{e.forEach(e=>e(t))},e)}var n3=typeof window<`u`&&window.document!==void 0&&window.document.createElement!==void 0;function r3(e){let t=Object.prototype.toString.call(e);return t===`[object Window]`||t===`[object global]`}function i3(e){return`nodeType`in e}function a3(e){return e?r3(e)?e:i3(e)?e.ownerDocument?.defaultView??window:window:window}function o3(e){let{Document:t}=a3(e);return e instanceof t}function s3(e){return r3(e)?!1:e instanceof a3(e).HTMLElement}function c3(e){return e instanceof a3(e).SVGElement}function l3(e){return e?r3(e)?e.document:i3(e)?o3(e)?e:s3(e)||c3(e)?e.ownerDocument:document:document:document}var u3=n3?y.useLayoutEffect:y.useEffect;function d3(e){let t=(0,y.useRef)(e);return u3(()=>{t.current=e}),(0,y.useCallback)(function(){var e=[...arguments];return t.current==null?void 0:t.current(...e)},[])}function zBe(){let e=(0,y.useRef)(null);return[(0,y.useCallback)((t,n)=>{e.current=setInterval(t,n)},[]),(0,y.useCallback)(()=>{e.current!==null&&(clearInterval(e.current),e.current=null)},[])]}function f3(e,t){t===void 0&&(t=[e]);let n=(0,y.useRef)(e);return u3(()=>{n.current!==e&&(n.current=e)},t),n}function p3(e,t){let n=(0,y.useRef)();return(0,y.useMemo)(()=>{let t=e(n.current);return n.current=t,t},[...t])}function m3(e){let t=d3(e),n=(0,y.useRef)(null);return[n,(0,y.useCallback)(e=>{e!==n.current&&t?.(e,n.current),n.current=e},[])]}function h3(e){let t=(0,y.useRef)();return(0,y.useEffect)(()=>{t.current=e},[e]),t.current}var g3={};function _3(e,t){return(0,y.useMemo)(()=>{if(t)return t;let n=g3[e]==null?0:g3[e]+1;return g3[e]=n,e+`-`+n},[e,t])}function v3(e){return function(t){return[...arguments].slice(1).reduce((t,n)=>{let r=Object.entries(n);for(let[n,i]of r){let r=t[n];r!=null&&(t[n]=r+e*i)}return t},{...t})}}var y3=v3(1),b3=v3(-1);function BBe(e){return`clientX`in e&&`clientY`in e}function x3(e){if(!e)return!1;let{KeyboardEvent:t}=a3(e.target);return t&&e instanceof t}function VBe(e){if(!e)return!1;let{TouchEvent:t}=a3(e.target);return t&&e instanceof t}function S3(e){if(VBe(e)){if(e.touches&&e.touches.length){let{clientX:t,clientY:n}=e.touches[0];return{x:t,y:n}}else if(e.changedTouches&&e.changedTouches.length){let{clientX:t,clientY:n}=e.changedTouches[0];return{x:t,y:n}}}return BBe(e)?{x:e.clientX,y:e.clientY}:null}var C3=Object.freeze({Translate:{toString(e){if(!e)return;let{x:t,y:n}=e;return`translate3d(`+(t?Math.round(t):0)+`px, `+(n?Math.round(n):0)+`px, 0)`}},Scale:{toString(e){if(!e)return;let{scaleX:t,scaleY:n}=e;return`scaleX(`+t+`) scaleY(`+n+`)`}},Transform:{toString(e){if(e)return[C3.Translate.toString(e),C3.Scale.toString(e)].join(` `)}},Transition:{toString(e){let{property:t,duration:n,easing:r}=e;return t+` `+n+`ms `+r}}}),w3=`a,frame,iframe,input:not([type=hidden]):not(:disabled),select:not(:disabled),textarea:not(:disabled),button:not(:disabled),*[tabindex]`;function HBe(e){return e.matches(w3)?e:e.querySelector(w3)}var UBe={display:`none`};function WBe(e){let{id:t,value:n}=e;return y.createElement(`div`,{id:t,style:UBe},n)}function GBe(e){let{id:t,announcement:n,ariaLiveType:r=`assertive`}=e;return y.createElement(`div`,{id:t,style:{position:`fixed`,top:0,left:0,width:1,height:1,margin:-1,border:0,padding:0,overflow:`hidden`,clip:`rect(0 0 0 0)`,clipPath:`inset(100%)`,whiteSpace:`nowrap`},role:`status`,"aria-live":r,"aria-atomic":!0},n)}function KBe(){let[e,t]=(0,y.useState)(``);return{announce:(0,y.useCallback)(e=>{e!=null&&t(e)},[]),announcement:e}}var T3=(0,y.createContext)(null);function qBe(e){let t=(0,y.useContext)(T3);(0,y.useEffect)(()=>{if(!t)throw Error(`useDndMonitor must be used within a children of <DndContext>`);return t(e)},[e,t])}function JBe(){let[e]=(0,y.useState)(()=>new Set),t=(0,y.useCallback)(t=>(e.add(t),()=>e.delete(t)),[e]);return[(0,y.useCallback)(t=>{let{type:n,event:r}=t;e.forEach(e=>e[n]?.call(e,r))},[e]),t]}var YBe={draggable:`
+                  [&::-webkit-slider-thumb]:cursor-pointer`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray w-12`,children:cp(p)})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`button`,{onClick:()=>{let e=o.current;e&&(e.currentTime=Math.max(0,e.currentTime-5))},className:`p-2 hover:bg-bambu-dark-tertiary rounded-lg transition-colors`,title:`Skip back 5s`,children:(0,G.jsx)(lu,{className:`w-5 h-5 text-bambu-gray`})}),(0,G.jsx)(`button`,{onClick:_,className:`p-2 bg-bambu-green hover:bg-bambu-green-dark rounded-lg transition-colors`,children:s?(0,G.jsx)(El,{className:`w-5 h-5 text-white`}):(0,G.jsx)(Ml,{className:`w-5 h-5 text-white`})}),(0,G.jsx)(`button`,{onClick:()=>{let e=o.current;e&&(e.currentTime=Math.min(p,e.currentTime+5))},className:`p-2 hover:bg-bambu-dark-tertiary rounded-lg transition-colors`,title:`Skip forward 5s`,children:(0,G.jsx)(uu,{className:`w-5 h-5 text-bambu-gray`})})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:`Speed:`}),(0,G.jsx)(`div`,{className:`flex gap-1`,children:SBe.map(e=>(0,G.jsxs)(`button`,{onClick:()=>u(e),className:`px-2 py-1 text-xs rounded transition-colors ${l===e?`bg-bambu-green text-white`:`bg-bambu-dark-tertiary text-bambu-gray hover:bg-bambu-dark-tertiary/80`}`,children:[e,`x`]},e))})]})]})]})]})]}),h&&r&&(0,G.jsx)(xBe,{archiveId:r,timelapseSrc:e,onClose:()=>g(!1),onSave:a})]})}function X4({archiveId:e,archiveName:t,printerName:n,onClose:r}){let{t:i}=U(),{showToast:a}=Gd(),[o,s]=(0,y.useState)(new Set),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(null),f=(0,y.useRef)(null),p=(0,y.useRef)(null),m=K({queryKey:[`archive-printer-media`,e],queryFn:()=>Z.getArchivePrinterMedia(e),staleTime:6e4}),h=(0,y.useMemo)(()=>m.data?.remote_files??[],[m.data]);(0,y.useEffect)(()=>{!m.data||f.current===e||(f.current=e,h.length===1&&s(new Set([h[0].path])))},[e,m.data,h]),(0,y.useEffect)(()=>{let e=new Set(h.map(e=>e.path));s(t=>new Set([...t].filter(t=>e.has(t))))},[h]),(0,y.useEffect)(()=>()=>p.current?.abort(),[]),(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&r()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[r]);let g=e=>{s(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},_=async()=>{let n=m.data?.local_timelapse?.name??``,r=n.includes(`.`)?`.${n.split(`.`).pop()}`:``;try{await Z.downloadArchiveTimelapse(e,`${t}_timelapse${r}`)}catch(e){a(i(`printerFiles.downloadFailed`,{error:e instanceof Error?e.message:i(`printerFiles.unknownError`)}),`error`)}},v=async()=>{if(!m.data?.printer_id||o.size===0)return;let e=h.filter(e=>o.has(e.path));if(e.length===0)return;let n=new AbortController;p.current=n,l(!0);try{let r=await Z.downloadPrinterFilesAsZip(m.data.printer_id,e.map(e=>e.path),Object.fromEntries(e.map(e=>[e.path,e.size])),`${t.replace(/[^a-zA-Z0-9]/g,`_`)}-printer-videos.zip`,!0,n.signal,(e,t)=>d({current:e,total:t}));r.failed>0?a(i(`printerFiles.zipPartial`,{successful:r.successful,total:r.requested}),`warning`):a(i(`printerFiles.zipStarted`,{count:r.successful}))}catch(e){a(i(`printerFiles.downloadFailed`,{error:e instanceof Error?e.message:i(`printerFiles.unknownError`)}),`error`)}finally{p.current===n&&(p.current=null),d(null),l(!1)}},b=!!m.data?.local_timelapse||h.length>0,x=e=>i(e===`printer_files_forbidden`?`printers.permission.noFiles`:e===`printer_missing`?`archives.media.printerMissing`:e===`timelapse_unavailable`?`archives.media.timelapseUnavailable`:`archives.media.ipcamUnavailable`),S=(m.data?.warnings??[]).map(e=>(0,G.jsx)(`p`,{className:`text-xs text-amber-600 dark:text-amber-400`,children:x(e)},e));return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/80 p-4`,onClick:r,children:(0,G.jsxs)(`div`,{className:`flex max-h-[85vh] w-full max-w-2xl flex-col overflow-hidden rounded-xl border border-bambu-dark-tertiary bg-bambu-dark-secondary`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between border-b border-bambu-dark-tertiary p-4`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsxs)(`h3`,{className:`flex items-center gap-2 text-lg font-semibold text-white`,children:[(0,G.jsx)(Wu,{className:`h-5 w-5 text-bambu-green`}),i(`archives.media.title`)]}),(0,G.jsxs)(`p`,{className:`truncate text-sm text-bambu-gray`,children:[t,` · `,n]})]}),(0,G.jsx)(`button`,{onClick:r,className:`rounded p-1 text-bambu-gray hover:bg-bambu-dark-tertiary hover:text-white`,children:(0,G.jsx)(td,{className:`h-5 w-5`})})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto p-4`,children:m.isLoading?(0,G.jsxs)(`div`,{className:`flex items-center justify-center gap-2 py-12 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`h-5 w-5 animate-spin`}),i(`archives.media.searching`)]}):m.isError?(0,G.jsx)(`p`,{className:`py-8 text-center text-red-500`,children:i(`archives.media.searchFailed`)}):b?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[m.data?.local_timelapse&&(0,G.jsxs)(`div`,{className:`flex items-center gap-3 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark p-3`,children:[(0,G.jsx)(pc,{className:`h-5 w-5 shrink-0 text-bambu-green`}),(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`p`,{className:`truncate text-sm font-medium text-white`,children:m.data.local_timelapse.name}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[i(`archives.media.attachedTimelapse`),` · `,Ud(m.data.local_timelapse.size)]})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:_,children:[(0,G.jsx)(Ys,{className:`h-4 w-4`}),i(`common.download`)]})]}),h.length>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`mb-2 flex items-center justify-between gap-2`,children:[(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[i(`archives.media.printerFiles`),` (`,h.length,`)`]}),(0,G.jsx)(`button`,{className:`text-xs text-bambu-green hover:text-bambu-green-light`,onClick:()=>s(o.size===h.length?new Set:new Set(h.map(e=>e.path))),children:o.size===h.length?i(`common.deselectAll`):i(`common.selectAll`)})]}),(0,G.jsx)(`div`,{className:`space-y-1`,children:h.map(e=>{let t=o.has(e.path);return(0,G.jsxs)(`button`,{className:`flex w-full items-center gap-3 rounded-lg border p-3 text-left transition-colors ${t?`border-bambu-green/60 bg-bambu-green/10`:`border-bambu-dark-tertiary bg-bambu-dark hover:border-bambu-gray`}`,onClick:()=>g(e.path),children:[t?(0,G.jsx)(_u,{className:`h-5 w-5 shrink-0 text-bambu-green`}):(0,G.jsx)(yu,{className:`h-5 w-5 shrink-0 text-bambu-gray`}),e.kind===`timelapse`?(0,G.jsx)(pc,{className:`h-5 w-5 shrink-0 text-bambu-green`}):(0,G.jsx)(Wu,{className:`h-5 w-5 shrink-0 text-blue-400`}),(0,G.jsx)(`span`,{className:`min-w-0 flex-1 truncate text-sm text-white`,children:e.name}),(0,G.jsx)(`span`,{className:`shrink-0 text-xs text-bambu-gray`,children:Ud(e.size)})]},e.path)})})]}),S]}):(0,G.jsxs)(`div`,{className:`space-y-3 py-8 text-center`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:i(`archives.media.none`)}),S]})}),h.length>0&&(0,G.jsx)(`div`,{className:`flex items-center justify-end border-t border-bambu-dark-tertiary p-4`,children:(0,G.jsxs)(Q,{variant:`primary`,onClick:v,disabled:o.size===0||c,children:[c?(0,G.jsx)(Y,{className:`h-4 w-4 animate-spin`}):(0,G.jsx)(Ys,{className:`h-4 w-4`}),u?`${u.current}/${u.total}`:`${i(`archives.media.downloadSelected`)} (${o.size})`]})})]})})}function CBe({archiveIds:e,onClose:t}){(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&t()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[t]);let{data:n,isLoading:r,error:i}=K({queryKey:[`archive-comparison`,e],queryFn:()=>Z.compareArchives(e)});return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/80 flex items-center justify-center z-50 p-4`,onClick:t,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg max-w-4xl w-full max-h-[90vh] flex flex-col border border-bambu-dark-tertiary`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`h3`,{className:`text-lg font-semibold text-white`,children:[`Compare Archives (`,e.length,`)`]}),(0,G.jsx)(`button`,{onClick:t,className:`text-bambu-gray hover:text-white p-1`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-auto p-4 bg-bambu-dark-secondary`,children:r?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-12`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):i?(0,G.jsxs)(`div`,{className:`text-center py-12 text-red-700 dark:text-red-400`,children:[(0,G.jsx)(Iu,{className:`w-12 h-12 mx-auto mb-4 opacity-50`}),(0,G.jsx)(`p`,{children:`Failed to load comparison`}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-2`,children:i instanceof Error?i.message:`Unknown error`})]}):n?(0,G.jsx)(wBe,{comparison:n}):null}),(0,G.jsx)(`div`,{className:`p-4 border-t border-bambu-dark-tertiary`,children:(0,G.jsx)(Q,{variant:`secondary`,onClick:t,className:`w-full`,children:`Close`})})]})})}function wBe({comparison:e}){return(0,G.jsxs)(`div`,{className:`space-y-6`,children:[(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{children:[(0,G.jsx)(`th`,{className:`text-left text-sm text-bambu-gray font-medium pb-2 pr-4 min-w-[150px]`,children:`Setting`}),e.archives.map(e=>(0,G.jsxs)(`th`,{className:`text-left text-sm font-medium pb-2 px-2 min-w-[120px]`,children:[(0,G.jsx)(`div`,{className:`text-white truncate max-w-[150px]`,title:e.print_name,children:e.print_name}),(0,G.jsx)(`div`,{className:`text-xs ${e.status===`completed`?`text-status-ok`:e.status===`failed`?`text-status-error`:`text-bambu-gray`}`,children:e.status})]},e.id))]})}),(0,G.jsx)(`tbody`,{className:`divide-y divide-bambu-gray/20`,children:e.comparison.map(e=>(0,G.jsxs)(`tr`,{className:e.has_difference?`bg-yellow-500/5`:``,children:[(0,G.jsx)(`td`,{className:`py-2 pr-4 text-sm`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[e.has_difference&&(0,G.jsx)(Iu,{className:`w-3 h-3 text-yellow-600 dark:text-yellow-400 flex-shrink-0`}),(0,G.jsx)(`span`,{className:e.has_difference?`text-yellow-700 dark:text-yellow-400`:`text-bambu-gray`,children:e.label})]})}),e.values.map((t,n)=>(0,G.jsxs)(`td`,{className:`py-2 px-2 text-sm text-white`,children:[t??(0,G.jsx)(`span`,{className:`text-bambu-gray/50`,children:`-`}),e.unit&&t!==null&&(0,G.jsx)(`span`,{className:`text-bambu-gray ml-1`,children:e.unit})]},n))]},e.field))})]})}),e.differences.length>0&&(0,G.jsxs)(`div`,{className:`p-4 bg-yellow-50 border border-yellow-300 dark:bg-yellow-500/10 dark:border-yellow-500/30 rounded-lg`,children:[(0,G.jsxs)(`h4`,{className:`text-sm font-medium text-yellow-700 dark:text-yellow-400 mb-2 flex items-center gap-2`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4`}),e.differences.length,` Difference`,e.differences.length>1?`s`:``,` Found`]}),(0,G.jsxs)(`ul`,{className:`text-sm text-white/80 space-y-1`,children:[e.differences.slice(0,5).map(e=>(0,G.jsxs)(`li`,{children:[(0,G.jsx)(`span`,{className:`text-yellow-700 dark:text-yellow-400`,children:e.label}),`: `,e.values.join(` vs `),` `,e.unit||``]},e.field)),e.differences.length>5&&(0,G.jsxs)(`li`,{className:`text-bambu-gray`,children:[`...and `,e.differences.length-5,` more`]})]})]}),e.success_correlation.has_both_outcomes?(0,G.jsxs)(`div`,{className:`p-4 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`h4`,{className:`text-sm font-medium text-white mb-3 flex items-center gap-2`,children:[(0,G.jsx)(fs,{className:`w-4 h-4 text-bambu-green`}),`Success/Failure Analysis`]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-4 text-sm mb-3`,children:[(0,G.jsxs)(`span`,{className:`text-bambu-green`,children:[e.success_correlation.successful_count,` successful`]}),(0,G.jsxs)(`span`,{className:`text-red-700 dark:text-red-400`,children:[e.success_correlation.failed_count,` failed`]})]}),e.success_correlation.insights&&e.success_correlation.insights.length>0?(0,G.jsx)(`div`,{className:`space-y-2`,children:e.success_correlation.insights.map(e=>(0,G.jsxs)(`div`,{className:`text-sm p-2 bg-bambu-dark-secondary rounded`,children:[(0,G.jsxs)(`span`,{className:`text-white font-medium`,children:[e.label,`:`]}),` `,(0,G.jsx)(`span`,{className:`text-white/80`,children:e.insight})]},e.field))}):(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:`No clear correlations found between settings and outcomes.`})]}):(0,G.jsx)(`div`,{className:`p-4 bg-bambu-dark rounded-lg text-sm text-bambu-gray`,children:(0,G.jsx)(`p`,{children:e.success_correlation.message||`Need both successful and failed prints for correlation analysis.`})})]})}function TBe(e){let t=new Date(e),n=new Date().getTime()-t.getTime(),r=Math.floor(n/6e4);if(r<1)return`Just now`;if(r<60)return`${r}m ago`;let i=Math.floor(r/60);return i<24?`${i}h ago`:`${Math.floor(i/24)}d ago`}function EBe({upload:e,projects:t,onArchive:n,onDiscard:r,isArchiving:i,isDiscarding:a}){let[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(e.tags||``),[u,d]=(0,y.useState)(e.notes||``),[f,p]=(0,y.useState)(e.project_id),[m,h]=(0,y.useState)(!1);return(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`py-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(oc,{className:`w-8 h-8 text-bambu-green flex-shrink-0`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,title:e.filename,children:e.display_name||e.filename}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-xs text-bambu-gray`,children:[(0,G.jsx)(`span`,{children:Ud(e.file_size)}),(0,G.jsx)(`span`,{children:`·`}),(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(js,{className:`w-3 h-3`}),TBe(e.uploaded_at)]}),e.source_ip&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{children:`·`}),(0,G.jsxs)(`span`,{children:[`from `,e.source_ip]})]})]})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`button`,{onClick:()=>s(!o),className:`p-1 text-bambu-gray hover:text-white transition-colors`,children:o?(0,G.jsx)(gs,{className:`w-5 h-5`}):(0,G.jsx)(ps,{className:`w-5 h-5`})}),(0,G.jsx)(Q,{variant:`primary`,size:`sm`,onClick:()=>n(e.id,{tags:c,notes:u,project_id:f||void 0}),disabled:i,children:i?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Po,{className:`w-4 h-4`}),`Archive`]})}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>h(!0),disabled:a,children:a?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Nu,{className:`w-4 h-4 text-red-600 dark:text-red-400`})})]})]}),m&&(0,G.jsx)(rf,{title:`Discard Upload`,message:`Are you sure you want to discard "${e.filename}"? This cannot be undone.`,confirmText:`Discard`,variant:`danger`,onConfirm:()=>{r(e.id),h(!1)},onCancel:()=>h(!1)}),o&&(0,G.jsxs)(`div`,{className:`mt-4 pt-4 border-t border-bambu-dark-tertiary space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:`Tags`}),(0,G.jsx)(`input`,{type:`text`,value:c,onChange:e=>l(e.target.value),placeholder:`e.g., functional, prototype, gift`,className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-2 text-white placeholder-bambu-gray text-sm`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:`Notes`}),(0,G.jsx)(`textarea`,{value:u,onChange:e=>d(e.target.value),placeholder:`Add notes about this print...`,rows:2,className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-2 text-white placeholder-bambu-gray text-sm resize-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:`Project`}),(0,G.jsxs)(`select`,{value:f||``,onChange:e=>p(e.target.value?Number(e.target.value):null),className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-2 text-white text-sm`,children:[(0,G.jsx)(`option`,{value:``,children:`No project`}),t.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]})]})]})})}function DBe(){let e=co(),{showToast:t}=Gd(),[n,r]=(0,y.useState)(!1),[i,a]=(0,y.useState)(!1),[o,s]=(0,y.useState)(new Set),[c,l]=(0,y.useState)(new Set),{data:u,isLoading:d}=K({queryKey:[`pending-uploads`],queryFn:wd.list,refetchInterval:1e4}),{data:f}=K({queryKey:[`projects`],queryFn:()=>Z.getProjects(),select:e=>nK([...e].sort((e,t)=>e.name.localeCompare(t.name)))}),p=q({mutationFn:({id:e,data:t})=>wd.archive(e,t),onMutate:({id:e})=>{s(t=>new Set(t).add(e))},onSettled:(e,t,{id:n})=>{s(e=>{let t=new Set(e);return t.delete(n),t})},onSuccess:n=>{e.invalidateQueries({queryKey:[`pending-uploads`]}),e.invalidateQueries({queryKey:[`archives`]}),t(`Archived: ${n.print_name}`)},onError:e=>{t(e.message||`Failed to archive`,`error`)}}),m=q({mutationFn:e=>wd.discard(e),onMutate:e=>{l(t=>new Set(t).add(e))},onSettled:(e,t,n)=>{l(e=>{let t=new Set(e);return t.delete(n),t})},onSuccess:()=>{e.invalidateQueries({queryKey:[`pending-uploads`]}),t(`Upload discarded`)},onError:e=>{t(e.message||`Failed to discard`,`error`)}}),h=q({mutationFn:wd.archiveAll,onSuccess:n=>{e.invalidateQueries({queryKey:[`pending-uploads`]}),e.invalidateQueries({queryKey:[`archives`]}),t(`Archived ${n.archived} files${n.failed>0?`, ${n.failed} failed`:``}`)},onError:e=>{t(e.message||`Failed to archive all`,`error`)}}),g=q({mutationFn:wd.discardAll,onSuccess:n=>{e.invalidateQueries({queryKey:[`pending-uploads`]}),t(`Discarded ${n.discarded} files`)},onError:e=>{t(e.message||`Failed to discard all`,`error`)}});return d?(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-8 flex justify-center`,children:(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin text-bambu-green`})})}):!u||u.length===0?null:(0,G.jsxs)(`div`,{className:`mb-6`,children:[(0,G.jsxs)(Ld,{className:`border-l-4 border-l-yellow-500`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Bu,{className:`w-5 h-5 text-yellow-500`}),(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white`,children:[`Pending Uploads (`,u.length,`)`]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Q,{variant:`primary`,size:`sm`,onClick:()=>r(!0),disabled:h.isPending,children:h.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Po,{className:`w-4 h-4`}),`Archive All`]})}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>a(!0),disabled:g.isPending,children:g.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),`Discard All`]})})]})]})}),(0,G.jsxs)(zd,{children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4`,children:`These files were uploaded via the virtual printer. Review and archive them to add to your collection.`}),(0,G.jsx)(`div`,{className:`space-y-3`,children:u.map(e=>(0,G.jsx)(EBe,{upload:e,projects:f||[],onArchive:(e,t)=>p.mutate({id:e,data:t}),onDiscard:e=>m.mutate(e),isArchiving:o.has(e.id),isDiscarding:c.has(e.id)},e.id))})]})]}),n&&(0,G.jsx)(rf,{title:`Archive All Uploads`,message:`Are you sure you want to archive all ${u.length} pending uploads?`,confirmText:`Archive All`,onConfirm:()=>{h.mutate(),r(!1)},onCancel:()=>r(!1)}),i&&(0,G.jsx)(rf,{title:`Discard All Uploads`,message:`Are you sure you want to discard all ${u.length} pending uploads? This cannot be undone.`,confirmText:`Discard All`,variant:`danger`,onConfirm:()=>{g.mutate(),a(!1)},onCancel:()=>a(!1)})]})}function OBe({onClose:e}){let t=co(),{showToast:n}=Gd(),[r,i]=(0,y.useState)(``),[a,o]=(0,y.useState)(null),[s,c]=(0,y.useState)(``),[l,u]=(0,y.useState)(null),[d,f]=(0,y.useState)(`count`);(0,y.useEffect)(()=>{let t=t=>{t.key===`Escape`&&(a?o(null):l?u(null):e())};return window.addEventListener(`keydown`,t),()=>window.removeEventListener(`keydown`,t)},[e,a,l]);let{data:p,isLoading:m}=K({queryKey:[`tags`],queryFn:Z.getTags}),h=q({mutationFn:({oldName:e,newName:t})=>Z.renameTag(e,t),onSuccess:(e,{oldName:r,newName:i})=>{t.invalidateQueries({queryKey:[`tags`]}),t.invalidateQueries({queryKey:[`archives`]}),n(`Renamed "${r}" to "${i}" in ${e.affected} archive${e.affected===1?``:`s`}`),o(null)},onError:e=>{n(e.message||`Failed to rename tag`,`error`)}}),g=q({mutationFn:e=>Z.deleteTag(e),onSuccess:(e,r)=>{t.invalidateQueries({queryKey:[`tags`]}),t.invalidateQueries({queryKey:[`archives`]}),n(`Deleted "${r}" from ${e.affected} archive${e.affected===1?``:`s`}`),u(null)},onError:e=>{n(e.message||`Failed to delete tag`,`error`)}}),_=e=>{o(e.name),c(e.name),u(null)},v=()=>{o(null),c(``)},b=()=>{if(!a||!s.trim())return;let e=s.trim();if(e===a){v();return}h.mutate({oldName:a,newName:e})},x=e=>{e.key===`Enter`?(e.preventDefault(),b()):e.key===`Escape`&&(e.preventDefault(),v())},S=e=>{u(e),o(null)},C=()=>{l&&g.mutate(l)},w=p?.filter(e=>e.name.toLowerCase().includes(r.toLowerCase())).sort((e,t)=>d===`count`&&t.count-e.count||e.name.localeCompare(t.name)),T=p?.reduce((e,t)=>e+t.count,0)||0;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,children:(0,G.jsx)(Ld,{className:`w-full max-w-lg max-h-[80vh] flex flex-col`,children:(0,G.jsxs)(zd,{className:`p-0 flex flex-col min-h-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary flex-shrink-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Tu,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-xl font-semibold text-white`,children:`Manage Tags`})]}),(0,G.jsx)(`button`,{onClick:e,className:`text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary flex-shrink-0`,children:[(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,placeholder:`Search tags...`,className:`w-full pl-9 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,value:r,onChange:e=>i(e.target.value)})]}),(0,G.jsxs)(`select`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,value:d,onChange:e=>f(e.target.value),children:[(0,G.jsx)(`option`,{value:`count`,children:`Sort by Count`}),(0,G.jsx)(`option`,{value:`name`,children:`Sort by Name`})]})]}),p&&(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-2`,children:[p.length,` tag`,p.length===1?``:`s`,` across `,T,` usage`,T===1?``:`s`]})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto min-h-0 p-4`,children:m?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin text-bambu-gray`})}):w?.length?(0,G.jsx)(`div`,{className:`space-y-2`,children:w.map(e=>(0,G.jsx)(`div`,{className:`flex items-center gap-2 p-2 rounded-lg bg-bambu-dark hover:bg-bambu-dark-tertiary transition-colors group`,children:a===e.name?(0,G.jsxs)(`div`,{className:`flex-1 flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`text`,className:`flex-1 px-2 py-1 bg-bambu-dark-tertiary border border-bambu-green rounded text-white text-sm focus:outline-none`,value:s,onChange:e=>c(e.target.value),onKeyDown:x,autoFocus:!0}),(0,G.jsx)(Q,{size:`sm`,variant:`primary`,onClick:b,disabled:!s.trim()||h.isPending,className:`p-1.5`,children:h.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(fs,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{size:`sm`,variant:`ghost`,onClick:v,className:`p-1.5`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}):l===e.name?(0,G.jsxs)(`div`,{className:`flex-1 flex items-center gap-2`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-600 dark:text-yellow-400 flex-shrink-0`}),(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray-light flex-1`,children:[`Delete "`,e.name,`" from `,e.count,` archive`,e.count===1?``:`s`,`?`]}),(0,G.jsx)(Q,{size:`sm`,variant:`danger`,onClick:C,disabled:g.isPending,className:`p-1.5`,children:g.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Nu,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{size:`sm`,variant:`ghost`,onClick:()=>u(null),className:`p-1.5`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Tu,{className:`w-4 h-4 text-bambu-gray flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-white flex-1 truncate`,children:e.name}),(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded-full bg-bambu-dark-tertiary text-bambu-gray text-xs`,children:e.count}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 can-hover:opacity-0 group-hover:opacity-100 group-focus-within:opacity-100 transition-opacity`,children:[(0,G.jsx)(`button`,{onClick:()=>_(e),className:`p-1.5 rounded hover:bg-bambu-dark text-bambu-gray hover:text-white transition-colors`,title:`Rename tag`,children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>S(e.name),className:`p-1.5 rounded hover:bg-bambu-dark text-bambu-gray hover:text-red-700 dark:hover:text-red-400 transition-colors`,title:`Delete tag`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})]})},e.name))}):(0,G.jsx)(`div`,{className:`text-center py-8 text-bambu-gray`,children:r?`No tags match your search`:`No tags found`})}),(0,G.jsx)(`div`,{className:`flex gap-3 p-4 border-t border-bambu-dark-tertiary flex-shrink-0`,children:(0,G.jsx)(Q,{variant:`secondary`,onClick:e,className:`flex-1`,children:`Close`})})]})})})}var Z4=`bambuddy-printlog-columns`,Q4={date:`archives.log.date`,print_name:`archives.log.printName`,printer:`archives.log.printer`,user:`archives.log.user`,status:`archives.log.status`,duration:`archives.log.duration`,completed_at:`archives.log.completedAt`,filament:`archives.log.filament`,filament_used:`archives.log.filamentUsed`,cost:`archives.log.cost`,energy:`archives.log.energy`,energy_cost:`archives.log.energyCost`},$4=[{id:`date`,visible:!0},{id:`print_name`,visible:!0},{id:`printer`,visible:!0},{id:`user`,visible:!0},{id:`status`,visible:!0},{id:`duration`,visible:!0},{id:`filament`,visible:!0},{id:`filament_used`,visible:!0},{id:`completed_at`,visible:!1},{id:`cost`,visible:!1},{id:`energy`,visible:!1},{id:`energy_cost`,visible:!1}];function kBe(){try{let e=localStorage.getItem(Z4);if(e){let t=JSON.parse(e),n=new Set(Object.keys(Q4)),r=new Set(t.map(e=>e.id)),i=t.filter(e=>n.has(e.id)).map(e=>({id:e.id,visible:!!e.visible})),a=$4.filter(e=>!r.has(e.id));if(i.length>0)return[...i,...a]}}catch{}return $4.map(e=>({...e}))}var e3=`bambuddy-printlog-sort`,t3=new Set(Object.keys(Q4)),ABe={column:`date`,direction:`desc`};function jBe(){try{let e=localStorage.getItem(e3);if(e){let t=JSON.parse(e);if(t3.has(t?.column)&&(t.direction===`asc`||t.direction===`desc`))return t}}catch{}return{...ABe}}function MBe(e){try{localStorage.setItem(e3,JSON.stringify(e))}catch{}}function NBe(e){try{localStorage.setItem(Z4,JSON.stringify(e.map(e=>({id:e.id,visible:e.visible}))))}catch{}}function n3(e){let t=e.filename;if(t){let e=t.toLowerCase();if(e.endsWith(`.gcode`)||e.includes(`.gcode.`))return!0}return!!(e.total_layers||e.print_time_seconds)}async function r3(e,t,n,r){try{if(n===`source`){let{token:n}=await Z.createSourceSlicerToken(e),i=Z.getSourceSlicerDownloadUrl(e,n,t);eK(`${window.location.origin}${i}`,r)}else{let{token:n}=await Z.createArchiveSlicerToken(e),i=Z.getArchiveSlicerDownloadUrl(e,n,t);eK(`${window.location.origin}${i}`,r)}}catch{let i=n===`source`?Z.getSource3mfForSlicer(e,t):Z.getArchiveForSlicer(e,t);eK(`${window.location.origin}${i}`,r)}}function PBe({archive:e,printerName:t,printerMap:n,isSelected:r,onSelect:i,selectionMode:a,projects:o,isHighlighted:s,timeFormat:c=`system`,preferredSlicer:l=`bambu_studio`,useSlicerApi:u=!1,currency:d,t:f,onNavigateToArchive:p}){s&&console.log(`ArchiveCard isHighlighted=true for archive:`,e.id);let m=co(),{showToast:h}=Gd(),{hasPermission:g,canModify:_}=jd(),v=or(),b=(0,y.useMemo)(()=>{let t=e.extra_data?.slicer_ams_mapping;if(!(!t||!Array.isArray(t.mapping)||t.printer_id==null))return n.get(t.printer_id)},[e.extra_data,n]),[x,S]=(0,y.useState)(!1),[C,w]=(0,y.useState)(!1),[T,E]=(0,y.useState)(!1),[D,O]=(0,y.useState)(!1),[k,A]=(0,y.useState)(!1),j=K({queryKey:[`archive`,e.id,`delete-impact`],queryFn:()=>Z.getArchiveDeleteImpact(e.id),enabled:D,staleTime:0}),[M,N]=(0,y.useState)(!1),[P,F]=(0,y.useState)(!1),[I,L]=(0,y.useState)(!1),[R,z]=(0,y.useState)(!1),[B,V]=(0,y.useState)(!1),[ee,te]=(0,y.useState)([]),[ne,re]=(0,y.useState)(!1),[ie,ae]=(0,y.useState)(!1),[oe,se]=(0,y.useState)(!1),[H,ce]=(0,y.useState)(!1),[le,ue]=(0,y.useState)(!1),[de,fe]=(0,y.useState)(!1),[pe,me]=(0,y.useState)(null),[he,ge]=(0,y.useState)(null),[_e,ve]=(0,y.useState)(!1),[ye,be]=(0,y.useState)(null),xe=(0,y.useRef)(null),Se=(0,y.useRef)(null),Ce=(0,y.useRef)(null),{data:we}=K({queryKey:[`archive-plates`,e.id],queryFn:()=>Z.getArchivePlates(e.id),enabled:_e,staleTime:300*1e3}),Te=e.duplicate_sequence??0,Ee=e.original_archive_id??null,De=we?.plates??[],Oe=we?.is_multi_plate??!1,ke=he??0,Ae=async()=>{try{let t=await Z.getArchivePlates(e.id);if(t.has_gcode===!1){h(f(`archives.platePicker.noGcode`),`info`);return}if(t.is_multi_plate&&t.plates.length>1){be(t.plates);return}}catch{}v(`/gcode-viewer?archive=${e.id}`)},je=q({mutationFn:()=>Z.deleteArchiveTimelapse(e.id),onSuccess:()=>{m.invalidateQueries({queryKey:[`archives`]}),h(f(`archives.toast.timelapseRemoved`))},onError:e=>{h(e.message||f(`archives.toast.failedRemoveTimelapse`),`error`)}}),Me=q({mutationFn:t=>Z.uploadArchiveTimelapse(e.id,t),onSuccess:e=>{m.invalidateQueries({queryKey:[`archives`]}),h(f(`archives.toast.timelapseUploaded`,{filename:e.filename}))},onError:e=>{h(e.message||f(`archives.toast.failedUploadTimelapse`),`error`)}}),Ne=q({mutationFn:t=>Z.uploadSource3mf(e.id,t),onSuccess:e=>{m.invalidateQueries({queryKey:[`archives`]}),h(f(`archives.toast.source3mfAttached`,{filename:e.filename}))},onError:e=>{h(e.message||f(`archives.toast.failedUploadSource3mf`),`error`)}}),Pe=q({mutationFn:()=>Z.deleteSource3mf(e.id),onSuccess:()=>{m.invalidateQueries({queryKey:[`archives`]}),h(f(`archives.toast.source3mfRemoved`))},onError:e=>{h(e.message||f(`archives.toast.failedRemoveSource3mf`),`error`)}}),Fe=q({mutationFn:t=>Z.uploadF3d(e.id,t),onSuccess:e=>{m.invalidateQueries({queryKey:[`archives`]}),h(f(`archives.toast.f3dAttached`,{filename:e.filename}))},onError:e=>{h(e.message||f(`archives.toast.failedUploadF3d`),`error`)}}),Ie=q({mutationFn:()=>Z.deleteF3d(e.id),onSuccess:()=>{m.invalidateQueries({queryKey:[`archives`]}),h(f(`archives.toast.f3dRemoved`))},onError:e=>{h(e.message||f(`archives.toast.failedRemoveF3d`),`error`)}}),Le=q({mutationFn:()=>Z.scanArchiveTimelapse(e.id),onSuccess:e=>{e.status===`attached`?(m.invalidateQueries({queryKey:[`archives`]}),h(f(`archives.toast.timelapseAttached`,{filename:e.filename}))):e.status===`exists`?h(f(`archives.toast.timelapseAlreadyAttached`)):e.status===`not_found`&&e.available_files&&e.available_files.length>0?(te(e.available_files),V(!0)):h(e.message||f(`archives.toast.noMatchingTimelapse`),`warning`)},onError:e=>{h(e.message||f(`archives.toast.failedScanTimelapse`),`error`)}}),Re=q({mutationFn:t=>Z.selectArchiveTimelapse(e.id,t),onSuccess:e=>{m.invalidateQueries({queryKey:[`archives`]}),h(f(`archives.toast.timelapseAttached`,{filename:e.filename})),V(!1),te([])},onError:e=>{h(e.message||f(`archives.toast.failedAttachTimelapse`),`error`)}}),ze=q({mutationFn:t=>Z.deleteArchive(e.id,t),onSuccess:()=>{tK(m),h(f(`archives.toast.archiveDeleted`))},onError:()=>{h(f(`archives.toast.failedDeleteArchive`),`error`)}}),Be=q({mutationFn:()=>Z.toggleFavorite(e.id),onSuccess:e=>{m.invalidateQueries({queryKey:[`archives`]}),h(e.is_favorite?f(`archives.toast.addedToFavorites`):f(`archives.toast.removedFromFavorites`))}}),{data:Ve}=K({queryKey:[`archive-folders`,e.id],queryFn:()=>Z.getLibraryFoldersByArchive(e.id)}),He=q({mutationFn:t=>Z.updateArchive(e.id,{project_id:t}),onSuccess:()=>{tK(m),h(f(`archives.toast.projectUpdated`))},onError:()=>{h(f(`archives.toast.failedUpdateProject`),`error`)}}),Ue=e=>{e.preventDefault(),me({x:e.clientX,y:e.clientY})},We=[...n3(e)?[{label:f(`common.print`),icon:(0,G.jsx)(Ll,{className:`w-4 h-4`}),onClick:()=>S(!0),disabled:!e.file_path||!g(`queue:create`)||!_(`archives`,`reprint`,e.created_by_id),title:e.file_path?g(`queue:create`)?_(`archives`,`reprint`,e.created_by_id)?void 0:f(`archives.permission.noReprint`):f(`archives.permission.noAddToQueue`):f(`archives.card.noFileForReprint`)},{label:f(`archives.menu.openInBambuStudio`),icon:(0,G.jsx)(nc,{className:`w-4 h-4`}),onClick:()=>{let t=e.print_name||e.filename||`model`;r3(e.id,t,`file`,l)},disabled:!e.file_path,title:e.file_path?void 0:f(`archives.card.noFileForReprint`)}]:[{label:f(`archives.menu.slice`),icon:u?(0,G.jsx)(Rs,{className:`w-4 h-4`}):(0,G.jsx)(nc,{className:`w-4 h-4`}),onClick:()=>{if(u)w(!0);else{let t=e.print_name||e.filename||`model`;r3(e.id,t,`file`,l)}}},...u?[{label:f(`library.runWithPipeline.actionLabel`),icon:(0,G.jsx)(Ml,{className:`w-4 h-4`}),onClick:()=>E(!0),disabled:!g(`pipelines:run`),title:g(`pipelines:run`)?void 0:f(`library.runWithPipeline.noPermission`)}]:[]],{label:e.external_url?f(`archives.menu.externalLink`):f(`archives.menu.viewOnMakerWorld`),icon:(0,G.jsx)(kc,{className:`w-4 h-4`}),onClick:()=>{let t=e.external_url||e.makerworld_url;t&&window.open(t,`_blank`)},disabled:!e.external_url&&!e.makerworld_url},{label:``,divider:!0,onClick:()=>{}},{label:f(`archives.menu.preview3d`),icon:(0,G.jsx)(Zo,{className:`w-4 h-4`}),onClick:()=>{Ae()}},{label:f(`archives.menu.viewTimelapse`),icon:(0,G.jsx)(pc,{className:`w-4 h-4`}),onClick:()=>L(!0),disabled:!e.timelapse_path},{label:f(`archives.media.download`),icon:(0,G.jsx)(lc,{className:`w-4 h-4`}),onClick:()=>z(!0),disabled:!e.timelapse_path&&(!g(`printers:files`)||!e.printer_id||!e.started_at),title:!e.timelapse_path&&!g(`printers:files`)?f(`printers.permission.noFiles`):void 0},{label:f(`archives.menu.scanForTimelapse`),icon:(0,G.jsx)(Yl,{className:`w-4 h-4`}),onClick:()=>Le.mutate(),disabled:!e.printer_id||!!e.timelapse_path||Le.isPending||!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?void 0:f(`archives.permission.noUpdateArchives`)},{label:f(`archives.menu.uploadTimelapse`),icon:(0,G.jsx)(Bu,{className:`w-4 h-4`}),onClick:()=>Ce.current?.click(),disabled:!!e.timelapse_path||!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?void 0:f(`archives.permission.noUpdateArchives`)},...e.timelapse_path?[{label:f(`archives.menu.removeTimelapse`),icon:(0,G.jsx)(Nu,{className:`w-4 h-4`}),onClick:()=>fe(!0),danger:!0,disabled:!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?void 0:f(`archives.permission.noUpdateArchives`)}]:[],{label:``,divider:!0,onClick:()=>{}},{label:e.source_3mf_path?f(`archives.menu.downloadSource3mf`):f(`archives.menu.uploadSource3mf`),icon:(0,G.jsx)(sc,{className:`w-4 h-4`}),onClick:()=>{e.source_3mf_path?Z.downloadSource3mf(e.id).catch(e=>{console.error(`Source 3MF download failed:`,e)}):xe.current?.click()},disabled:!e.source_3mf_path&&!_(`archives`,`update`,e.created_by_id),title:!e.source_3mf_path&&!_(`archives`,`update`,e.created_by_id)?f(`archives.permission.noUploadFiles`):void 0},...e.source_3mf_path?[{label:f(`archives.menu.replaceSource3mf`),icon:(0,G.jsx)(Bu,{className:`w-4 h-4`}),onClick:()=>xe.current?.click(),disabled:!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?void 0:f(`archives.permission.noUpdateArchives`)},{label:f(`archives.menu.removeSource3mf`),icon:(0,G.jsx)(Nu,{className:`w-4 h-4`}),onClick:()=>ce(!0),danger:!0,disabled:!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?void 0:f(`archives.permission.noUpdateArchives`)}]:[],{label:e.f3d_path?f(`archives.menu.replaceF3d`):f(`archives.menu.uploadF3d`),icon:(0,G.jsx)(Zo,{className:`w-4 h-4`}),onClick:()=>Se.current?.click(),disabled:!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?void 0:f(`archives.permission.noUpdateArchives`)},...e.f3d_path?[{label:f(`archives.menu.downloadF3d`),icon:(0,G.jsx)(Ys,{className:`w-4 h-4`}),onClick:()=>{Z.downloadF3d(e.id).catch(e=>{console.error(`F3D download failed:`,e)})}},{label:f(`archives.menu.removeF3d`),icon:(0,G.jsx)(Nu,{className:`w-4 h-4`}),onClick:()=>ue(!0),danger:!0,disabled:!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?void 0:f(`archives.permission.noUpdateArchives`)}]:[],{label:``,divider:!0,onClick:()=>{}},{label:f(`archives.menu.download`),icon:(0,G.jsx)(Ys,{className:`w-4 h-4`}),onClick:()=>{Z.downloadArchive(e.id,`${e.print_name||e.filename}.3mf`).catch(e=>{console.error(`Archive download failed:`,e)})},disabled:!g(`archives:read`),title:g(`archives:read`)?void 0:f(`archives.permission.noDownload`)},{label:f(`archives.menu.copyDownloadLink`),icon:(0,G.jsx)(Vs,{className:`w-4 h-4`}),onClick:()=>{let t=`${window.location.origin}${Z.getArchiveDownload(e.id)}`;navigator.clipboard.writeText(t).then(()=>{h(f(`archives.toast.linkCopied`))}).catch(()=>{h(f(`archives.toast.failedCopyLink`),`error`)})},disabled:!g(`archives:read`),title:g(`archives:read`)?void 0:f(`archives.permission.noCopyLink`)},{label:f(`archives.menu.qrCode`),icon:(0,G.jsx)(Rl,{className:`w-4 h-4`}),onClick:()=>re(!0)},{label:e.photos?.length?f(`archives.menu.viewPhotosCount`,{count:e.photos.length}):f(`archives.menu.viewPhotos`),icon:(0,G.jsx)(ss,{className:`w-4 h-4`}),onClick:()=>ae(!0),disabled:!e.photos?.length},{label:f(`archives.menu.projectPage`),icon:(0,G.jsx)(dc,{className:`w-4 h-4`}),onClick:()=>se(!0)},{label:``,divider:!0,onClick:()=>{}},{label:e.is_favorite?f(`archives.menu.removeFromFavorites`):f(`archives.menu.addToFavorites`),icon:(0,G.jsx)(bu,{className:`w-4 h-4 ${e.is_favorite?`fill-yellow-400 text-yellow-400`:_(`archives`,`update`,e.created_by_id)?`group-hover:text-yellow-400`:``}`}),onClick:()=>Be.mutate(),disabled:!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?void 0:f(`archives.permission.noUpdateArchives`)},{label:f(`archives.menu.edit`),icon:(0,G.jsx)(kl,{className:`w-4 h-4`}),onClick:()=>N(!0),disabled:!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?void 0:f(`archives.permission.noUpdateArchives`)},{label:f(`archives.menu.printLog`),icon:(0,G.jsx)(Rc,{className:`w-4 h-4`}),onClick:()=>F(!0)},...e.project_id&&e.project_name?[{label:f(`archives.menu.goToProject`,{name:e.project_name}),icon:(0,G.jsx)(gc,{className:`w-4 h-4 text-bambu-green`}),onClick:()=>window.location.href=`/projects`}]:[],{label:f(`archives.menu.addToProject`),icon:(0,G.jsx)(gc,{className:`w-4 h-4`}),onClick:()=>{},disabled:!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?void 0:f(`archives.permission.noUpdateArchives`),submenuSearchPlaceholder:nK(o??[],e.project_id).length>5?f(`archives.menu.searchProjects`):void 0,submenu:(()=>{let t=[];if(e.project_id&&t.push({label:f(`archives.menu.removeFromProject`),icon:(0,G.jsx)(td,{className:`w-4 h-4`}),onClick:()=>He.mutate(null),disabled:!_(`archives`,`update`,e.created_by_id)}),!o)t.push({label:f(`archives.menu.loading`),icon:(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),onClick:()=>{},disabled:!0});else{let n=nK(o,e.project_id).sort((e,t)=>e.name.localeCompare(t.name));n.length===0?t.push({label:f(`archives.menu.noProjectsAvailable`),icon:(0,G.jsx)(gc,{className:`w-4 h-4 opacity-50`}),onClick:()=>{},disabled:!0}):n.forEach(n=>{t.push({label:n.name,icon:(0,G.jsx)(`div`,{className:`w-3 h-3 rounded-full flex-shrink-0`,style:{backgroundColor:n.color||`#888`}}),onClick:()=>He.mutate(n.id),disabled:e.project_id===n.id||!_(`archives`,`update`,e.created_by_id)})})}return t})()},{label:f(r?`archives.menu.deselect`:`archives.menu.select`),icon:r?(0,G.jsx)(_u,{className:`w-4 h-4`}):(0,G.jsx)(yu,{className:`w-4 h-4`}),onClick:()=>i(e.id)},{label:``,divider:!0,onClick:()=>{}},{label:f(`archives.menu.delete`),icon:(0,G.jsx)(Nu,{className:`w-4 h-4`}),onClick:()=>O(!0),danger:!0,disabled:!_(`archives`,`delete`,e.created_by_id),title:_(`archives`,`delete`,e.created_by_id)?void 0:f(`archives.permission.noDelete`)}];return(0,G.jsxs)(Ld,{"data-archive-id":e.id,className:`relative flex flex-col group ${r?`ring-2 ring-bambu-green`:``} ${a?`cursor-pointer`:``}`,style:s?{outline:`4px solid #facc15`,outlineOffset:`2px`}:void 0,onContextMenu:Ue,onClick:a?()=>i(e.id):void 0,children:[a&&(0,G.jsx)(`button`,{className:`absolute top-2 left-2 z-10 p-1 rounded bg-black/50 hover:bg-black/70 transition-colors`,onClick:t=>{t.stopPropagation(),i(e.id)},children:r?(0,G.jsx)(_u,{className:`w-5 h-5 text-bambu-green`}):(0,G.jsx)(yu,{className:`w-5 h-5 text-white`})}),(0,G.jsxs)(`div`,{className:`aspect-video bg-bambu-dark relative flex-shrink-0 overflow-hidden rounded-t-xl`,onMouseEnter:()=>ve(!0),onMouseLeave:()=>ve(!1),children:[e.thumbnail_path?(0,G.jsx)(`img`,{src:he!==null&&De.length>0?Z.getArchivePlateThumbnail(e.id,De[ke]?.index??0):Z.getArchiveThumbnail(e.id),alt:e.print_name||e.filename,className:`w-full h-full object-cover`}):(0,G.jsx)(`div`,{className:`w-full h-full flex items-center justify-center`,children:(0,G.jsx)(Vc,{className:`w-12 h-12 text-bambu-dark-tertiary`})}),Oe&&De.length>1&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`button`,{className:`absolute left-1 top-1/2 -translate-y-1/2 p-1 rounded-full bg-black/60 hover:bg-black/80 transition-all can-hover:opacity-0 group-hover:opacity-100 group-focus-within:opacity-100`,onClick:e=>{e.stopPropagation(),ge(e=>{let t=e??0;return t>0?t-1:De.length-1})},title:f(`archives.card.previousPlate`),children:(0,G.jsx)(hs,{className:`w-4 h-4 text-white`})}),(0,G.jsx)(`button`,{className:`absolute right-1 top-1/2 -translate-y-1/2 p-1 rounded-full bg-black/60 hover:bg-black/80 transition-all can-hover:opacity-0 group-hover:opacity-100 group-focus-within:opacity-100`,onClick:e=>{e.stopPropagation(),ge(e=>{let t=e??0;return t<De.length-1?t+1:0})},title:f(`archives.card.nextPlate`),children:(0,G.jsx)(ms,{className:`w-4 h-4 text-white`})}),(0,G.jsx)(`div`,{className:`absolute bottom-1 left-1/2 -translate-x-1/2 flex gap-1 px-2 py-1 rounded-full bg-black/50 transition-all can-hover:opacity-0 group-hover:opacity-100 group-focus-within:opacity-100`,children:De.map((e,t)=>(0,G.jsx)(`button`,{className:`w-2 h-2 rounded-full transition-colors ${t===ke?`bg-bambu-green`:`bg-white/50 hover:bg-white/80`}`,onClick:e=>{e.stopPropagation(),ge(t)},title:e.name||f(`archives.card.plateNumber`,{index:e.index})},e.index))})]}),(0,G.jsx)(`button`,{className:`absolute top-2 left-2 p-1.5 rounded bg-black/50 hover:bg-black/70 transition-all can-hover:opacity-0 group-hover:opacity-100 group-focus-within:opacity-100 ${a?`left-10`:``}`,onClick:e=>{e.stopPropagation();let t=e.currentTarget.getBoundingClientRect();me({x:t.left,y:t.bottom+4})},title:f(`archives.card.moreOptions`),children:(0,G.jsx)(Qs,{className:`w-5 h-5 text-white`})}),(0,G.jsx)(`button`,{className:`absolute top-2 right-2 p-1 rounded transition-colors ${_(`archives`,`update`,e.created_by_id)?`bg-black/50 hover:bg-black/70`:`bg-black/30 cursor-not-allowed`}`,onClick:t=>{t.stopPropagation(),_(`archives`,`update`,e.created_by_id)&&Be.mutate()},disabled:!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?e.is_favorite?f(`archives.card.removeFromFavorites`):f(`archives.card.addToFavorites`):f(`archives.permission.noUpdateArchives`),children:(0,G.jsx)(bu,{className:`w-5 h-5 ${e.is_favorite?`text-yellow-400 fill-yellow-400`:`text-white`} ${_(`archives`,`update`,e.created_by_id)?``:`opacity-50`}`})}),(e.status===`failed`||e.status===`aborted`)&&(0,G.jsx)(`div`,{className:`absolute top-2 left-12 px-2 py-1 rounded text-xs bg-status-error/80 text-white`,children:e.status===`aborted`?f(`archives.card.cancelled`):f(`archives.card.failed`)}),e.duplicate_count>0&&Te>0&&Ee&&(0,G.jsxs)(`button`,{onClick:e=>{e.stopPropagation(),p?.(Ee)},className:`absolute top-2 right-12 px-2 py-1 rounded text-xs bg-purple-500/80 hover:bg-purple-600/90 text-white flex items-center gap-1 transition-colors cursor-pointer`,title:f(`archives.viewOriginalPrint`,{id:Ee}),children:[(0,G.jsx)(Vs,{className:`w-3 h-3`}),`#`,Te]}),e.duplicate_count>0&&Te===0&&(0,G.jsxs)(`span`,{className:`absolute top-2 right-12 px-2 py-1 rounded text-xs bg-purple-500/80 text-white flex items-center gap-1`,title:`${e.duplicate_count} reprint${e.duplicate_count===1?``:`s`}`,children:[(0,G.jsx)(Ec,{className:`w-3 h-3`}),`+`,e.duplicate_count]}),e.source_3mf_path&&(0,G.jsx)(`button`,{className:`absolute bottom-2 left-2 p-1.5 rounded bg-black/60 hover:bg-black/80 transition-colors`,onClick:t=>{t.stopPropagation();let n=(e.print_name||e.filename||`source`).replace(/\.gcode\.3mf$/i,``)+`_source`;r3(e.id,n,`source`,l)},title:f(`archives.card.openSource3mf`),children:(0,G.jsx)(sc,{className:`w-4 h-4 text-orange-400`})}),e.f3d_path&&(0,G.jsx)(`button`,{className:`absolute bottom-2 ${e.source_3mf_path?`left-12`:`left-2`} p-1.5 rounded bg-black/60 hover:bg-black/80 transition-colors`,onClick:t=>{t.stopPropagation(),Z.downloadF3d(e.id).catch(e=>{console.error(`F3D download failed:`,e)})},title:f(`archives.card.downloadF3d`),children:(0,G.jsx)(Zo,{className:`w-4 h-4 text-cyan-400`})}),(0,G.jsx)(`button`,{className:`absolute bottom-2 right-2 p-1.5 rounded bg-black/60 hover:bg-black/80 transition-colors`,onClick:e=>{e.stopPropagation(),Ae()},title:f(`archives.card.preview3d`),children:(0,G.jsx)(qc,{className:`w-4 h-4 text-white`})}),e.timelapse_path&&(0,G.jsx)(`button`,{className:`absolute bottom-2 right-12 p-1.5 rounded bg-black/60 hover:bg-black/80 transition-colors`,onClick:e=>{e.stopPropagation(),L(!0)},title:f(`archives.card.viewTimelapse`),children:(0,G.jsx)(pc,{className:`w-4 h-4 text-bambu-green`})}),e.photos&&e.photos.length>0&&(0,G.jsxs)(`button`,{className:`absolute bottom-2 ${e.timelapse_path?`right-[5.5rem]`:`right-12`} p-1.5 rounded bg-black/60 hover:bg-black/80 transition-colors`,onClick:e=>{e.stopPropagation(),ae(!0)},title:e.photos.length===1?f(`archives.card.viewPhoto`):f(`archives.card.viewPhotos`,{count:e.photos.length}),children:[(0,G.jsx)(ss,{className:`w-4 h-4 text-blue-400`}),e.photos.length>1&&(0,G.jsx)(`span`,{className:`absolute -top-1 -right-1 w-4 h-4 bg-blue-500 rounded-full text-[10px] text-white flex items-center justify-center`,children:e.photos.length})]}),Ve&&Ve.length>0&&(0,G.jsx)(Ai,{to:`/files?folder=${Ve[0].id}`,className:`absolute bottom-2 p-1.5 rounded bg-black/60 hover:bg-black/80 transition-colors`,onClick:e=>e.stopPropagation(),title:f(`archives.card.openFolder`,{name:Ve[0].name}),style:{left:e.source_3mf_path?e.f3d_path?`5.5rem`:`3rem`:e.f3d_path?`3rem`:`0.5rem`},children:(0,G.jsx)(_c,{className:`w-4 h-4 text-yellow-400`})})]}),(0,G.jsxs)(zd,{className:`p-4 flex-1 flex flex-col`,children:[(0,G.jsxs)(`p`,{className:`text-[10px] text-bambu-gray/70 mb-1`,children:[`#`,e.id]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2 mb-1`,children:[(0,G.jsxs)(`h3`,{className:`min-w-0 font-medium text-white truncate`,children:[e.print_name||e.filename,e.plate_id!=null&&e.plate_id>1&&` — ${f(`printers.plateNumber`,{number:e.plate_id})}`]}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,className:`p-1 sm:p-1.5 shrink-0`,onClick:()=>N(!0),disabled:!_(`archives`,`update`,e.created_by_id),title:_(`archives`,`update`,e.created_by_id)?f(`archives.card.edit`):f(`archives.card.noPermissionEdit`),children:(0,G.jsx)(kl,{className:`w-3 h-3 sm:w-4 sm:h-4`})})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3 flex-wrap`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:t}),(()=>{let t=kW(e.bed_type);return t?(0,G.jsx)(`img`,{src:t.icon,alt:t.label,title:t.label,className:`w-4 h-4 flex-shrink-0`}):null})(),(0,G.jsx)(`span`,{className:`text-[10px] px-1.5 py-0.5 rounded font-medium ${n3(e)?`bg-bambu-green/20 text-bambu-green`:`bg-orange-100 dark:bg-orange-500/20 text-orange-700 dark:text-orange-400`}`,title:n3(e)?f(`archives.card.slicedFile`):f(`archives.card.sourceFile`),children:n3(e)?f(`archives.card.gcode`):f(`archives.card.source`)}),e.content_hash&&(0,G.jsx)(`span`,{className:`text-[10px] px-1.5 py-0.5 rounded font-mono bg-bambu-dark-tertiary/50 text-bambu-gray-light opacity-0 transition-opacity duration-150 group-hover:opacity-100`,title:`SHA256: ${e.content_hash}`,children:e.content_hash.slice(0,8).toUpperCase()}),e.project_name&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded-full truncate max-w-[120px]`,style:{backgroundColor:`${o?.find(t=>t.id===e.project_id)?.color||`#6b7280`}20`,color:o?.find(t=>t.id===e.project_id)?.color||`#6b7280`},title:f(`archives.card.project`,{name:e.project_name}),children:e.project_name}),e.run_count>1&&(0,G.jsx)(`button`,{className:`text-[10px] px-1.5 py-0.5 rounded font-medium bg-bambu-orange/20 text-bambu-orange hover:bg-bambu-orange/30 transition-colors cursor-pointer`,onClick:e=>{e.stopPropagation(),F(!0)},title:f(`archives.card.runsBadgeTitle`,{count:e.run_count,successful:e.successful_run_count,failed:e.failed_run_count}),children:f(`archives.card.runsBadge`,{count:e.run_count})})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2 text-xs mb-4 min-h-[48px]`,children:[(e.print_time_seconds||e.actual_time_seconds)&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-bambu-gray`,title:e.time_accuracy?`Estimated: ${op(e.print_time_seconds||0)}\nActual: ${op(e.actual_time_seconds||0)}\nAccuracy: ${e.time_accuracy.toFixed(0)}%`:e.actual_time_seconds?`Actual: ${op(e.actual_time_seconds)}`:`Estimated: ${op(e.print_time_seconds||0)}`,children:[(0,G.jsx)(js,{className:`w-3 h-3`}),op(e.actual_time_seconds||e.print_time_seconds||0),e.time_accuracy&&(0,G.jsxs)(`span`,{className:`text-[10px] px-1 rounded ${e.time_accuracy>=95&&e.time_accuracy<=105?`bg-bambu-green/20 text-bambu-green`:e.time_accuracy>105?`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`:`bg-orange-100 dark:bg-orange-500/20 text-orange-700 dark:text-orange-400`}`,children:[e.time_accuracy>100?`+`:``,(e.time_accuracy-100).toFixed(0),`%`]})]}),e.filament_used_grams&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-bambu-gray`,children:[(0,G.jsx)(Sl,{className:`w-3 h-3`}),e.filament_used_grams.toFixed(1),`g`]}),(e.cost!=null||e.energy_cost!=null)&&(0,G.jsxs)(`div`,{className:`flex items-center gap-3 text-bambu-gray`,children:[e.cost!=null&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(Ls,{className:`w-3 h-3`}),d,e.cost.toFixed(2)]}),e.energy_cost!=null&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,title:`${f(`stats.energyUsed`)}: ${e.energy_kwh?.toFixed(3)||`N/A`} kWh`,children:[(0,G.jsx)(rd,{className:`w-3 h-3`}),d,e.energy_cost.toFixed(2)]})]}),(e.layer_height||e.total_layers)&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-bambu-gray`,children:[(0,G.jsx)(qc,{className:`w-3 h-3`}),e.total_layers&&(0,G.jsx)(`span`,{children:e.total_layers===1?f(`archives.card.layer`,{count:e.total_layers}):f(`archives.card.layers`,{count:e.total_layers})}),e.total_layers&&e.layer_height&&(0,G.jsx)(`span`,{className:`text-bambu-gray/50`,children:`·`}),e.layer_height&&(0,G.jsxs)(`span`,{children:[e.layer_height,`mm`]})]}),e.object_count!=null&&e.object_count>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-bambu-gray`,title:e.object_count===1?f(`archives.card.object`,{count:e.object_count}):f(`archives.card.objects`,{count:e.object_count}),children:[(0,G.jsx)(Zo,{className:`w-3 h-3`}),e.object_count===1?f(`archives.card.object`,{count:e.object_count}):f(`archives.card.objects`,{count:e.object_count})]}),e.sliced_for_model&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-bambu-gray`,title:f(`archives.card.slicedFor`,{model:e.sliced_for_model}),children:[(0,G.jsx)(Ll,{className:`w-3 h-3`}),e.sliced_for_model]}),e.filament_type&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 col-span-2`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray text-xs`,children:e.filament_type}),e.filament_color&&(0,G.jsx)(`div`,{className:`flex items-center gap-0.5 flex-wrap`,children:e.filament_color.split(`,`).map((e,t)=>(0,G.jsx)(`div`,{className:`w-3 h-3 rounded-full border border-black/20`,style:{backgroundColor:e},title:e},t))})]})]}),b&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-bambu-green text-xs mb-3`,title:f(`archives.card.slicerAmsMappingTooltip`,{printer:b}),children:[(0,G.jsx)(Ss,{className:`w-3.5 h-3.5`}),f(`archives.card.slicerAmsMapping`,{printer:b})]}),(e.tags||e.notes)&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-1.5 mb-3`,children:[e.notes&&(0,G.jsx)(`div`,{className:`flex items-center gap-1 px-1.5 py-0.5 bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400 rounded text-xs`,title:e.notes,children:(0,G.jsx)(Su,{className:`w-3 h-3`})}),e.tags?.split(`,`).map((e,t)=>(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-bambu-dark-tertiary text-bambu-gray-light rounded text-xs`,children:e.trim()},t))]}),(0,G.jsx)(`div`,{className:`flex-1`}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-xs text-bambu-gray border-t border-bambu-dark-tertiary pt-3`,children:[(0,G.jsx)(`span`,{children:rp(e.created_at,c)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[e.created_by_username&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,title:f(`archives.card.uploadedBy`,{name:e.created_by_username}),children:[(0,G.jsx)(Vu,{className:`w-3 h-3`}),e.created_by_username]}),(0,G.jsx)(`span`,{children:Ud(e.file_size)})]})]}),(0,G.jsxs)(`div`,{className:`flex gap-1 mt-3`,children:[n3(e)?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(Q,{variant:`primary`,size:`sm`,className:`flex-1 min-w-0 overflow-hidden`,onClick:()=>S(!0),disabled:!e.file_path||!g(`queue:create`)||!_(`archives`,`reprint`,e.created_by_id),title:e.file_path?g(`queue:create`)?_(`archives`,`reprint`,e.created_by_id)?void 0:f(`archives.card.noPermissionReprint`):f(`archives.permission.noAddToQueue`):f(`archives.card.noFileForReprint`),children:[(0,G.jsx)(Ll,{className:`w-3 h-3 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`hidden xl:inline truncate`,children:f(`common.print`)})]}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,className:`min-w-0 p-1 sm:p-1.5`,onClick:()=>{let t=e.print_name||e.filename||`model`;r3(e.id,t,`file`,l)},title:f(`archives.card.openInBambuStudio`),children:(0,G.jsx)(nc,{className:`w-3 h-3 sm:w-4 sm:h-4`})})]}):(0,G.jsxs)(Q,{variant:`primary`,size:`sm`,className:`flex-1 min-w-0 overflow-hidden`,onClick:()=>{if(u)w(!0);else{let t=e.print_name||e.filename||`model`;r3(e.id,t,`file`,l)}},title:f(u?`slice.title`:`archives.card.openInBambuStudioToSlice`),children:[u?(0,G.jsx)(Rs,{className:`w-3 h-3 flex-shrink-0`}):(0,G.jsx)(nc,{className:`w-3 h-3 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`hidden xl:inline truncate`,children:f(`archives.card.slice`)})]}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,className:`min-w-0 p-1 sm:p-1.5`,onClick:()=>{let t=e.external_url||e.makerworld_url;t&&window.open(t,`_blank`)},disabled:!e.external_url&&!e.makerworld_url,title:e.external_url?f(`archives.card.externalLink`):e.makerworld_url?f(`archives.card.makerWorld`,{designer:e.designer||f(`archives.card.viewProject`)}):f(`archives.card.noExternalLink`),children:(0,G.jsx)(kc,{className:`w-3 h-3 sm:w-4 sm:h-4 ${!e.external_url&&!e.makerworld_url?`opacity-20`:``}`})}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,className:`min-w-0 p-1 sm:p-1.5`,onClick:()=>{Z.downloadArchive(e.id,`${e.print_name||e.filename}.3mf`).catch(e=>{console.error(`Archive download failed:`,e)})},title:f(`archives.card.download`),children:(0,G.jsx)(Ys,{className:`w-3 h-3 sm:w-4 sm:h-4`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,className:`min-w-0 p-1 sm:p-1.5`,onClick:()=>O(!0),disabled:!_(`archives`,`delete`,e.created_by_id),title:_(`archives`,`delete`,e.created_by_id)?f(`archives.card.delete`):f(`archives.card.noPermissionDelete`),children:(0,G.jsx)(Nu,{className:`w-3 h-3 sm:w-4 sm:h-4 text-red-600 dark:text-red-400`})})]})]}),M&&(0,G.jsx)(sK,{archive:e,onClose:()=>N(!1)}),P&&(0,G.jsx)(cK,{archiveId:e.id,archiveName:e.print_name||e.filename,onClose:()=>F(!1)}),ye&&(0,G.jsx)(OG,{plates:ye,onSelect:t=>{be(null),v(`/gcode-viewer?archive=${e.id}&plate=${t}`)},onClose:()=>be(null)}),x&&(0,G.jsx)(qW,{mode:`create`,archiveId:e.id,archiveName:e.print_name||e.filename,onClose:()=>S(!1)}),C&&(0,G.jsx)(KG,{source:{kind:`archive`,id:e.id,filename:e.print_name||e.filename||`model`},onClose:()=>w(!1)}),T&&(0,G.jsx)(YG,{source:{kind:`archive`,id:e.id,filename:e.print_name||e.filename||`model`},onClose:()=>E(!1)}),D&&(0,G.jsxs)(rf,{title:f(`archives.modal.deleteArchive`),message:f(`archives.modal.deleteConfirm`,{name:e.print_name||e.filename}),confirmText:f(`archives.modal.deleteButton`),variant:`danger`,confirmDisabled:(j.data?.currently_printing??0)>0,onConfirm:()=>{ze.mutate(k),O(!1),A(!1)},onCancel:()=>{O(!1),A(!1)},children:[(j.data?.related_queue_items??0)>0&&(0,G.jsx)(`div`,{className:(j.data?.currently_printing??0)>0?`text-sm text-red-600 dark:text-red-400 mb-2`:`text-sm text-amber-600 dark:text-amber-400 mb-2`,children:(j.data?.currently_printing??0)>0?f(`archives.modal.deleteBlockedByPrinting`,{count:j.data.currently_printing}):f(`archives.modal.deleteQueueItemsWarning`,{count:j.data.related_queue_items})}),(0,G.jsxs)(`label`,{className:`flex items-start gap-2 cursor-pointer text-sm text-bambu-gray`,children:[(0,G.jsx)(`input`,{type:`checkbox`,className:`mt-0.5 accent-red-500`,checked:k,onChange:e=>A(e.target.checked)}),(0,G.jsx)(`span`,{children:f(`archives.modal.deletePurgeStats`)})]})]}),H&&(0,G.jsx)(rf,{title:f(`archives.modal.removeSource3mf`),message:f(`archives.modal.removeSource3mfConfirm`,{name:e.print_name||e.filename}),confirmText:f(`archives.modal.removeButton`),variant:`danger`,onConfirm:()=>{Pe.mutate(),ce(!1)},onCancel:()=>ce(!1)}),le&&(0,G.jsx)(rf,{title:f(`archives.modal.removeF3d`),message:f(`archives.modal.removeF3dConfirm`,{name:e.print_name||e.filename}),confirmText:f(`archives.modal.removeButton`),variant:`danger`,onConfirm:()=>{Ie.mutate(),ue(!1)},onCancel:()=>ue(!1)}),de&&(0,G.jsx)(rf,{title:f(`archives.modal.removeTimelapse`),message:f(`archives.modal.removeTimelapseConfirm`,{name:e.print_name||e.filename}),confirmText:f(`archives.modal.removeButton`),variant:`danger`,onConfirm:()=>{je.mutate(),fe(!1)},onCancel:()=>fe(!1)}),pe&&(0,G.jsx)(FT,{x:pe.x,y:pe.y,items:We,onClose:()=>me(null)}),R&&(0,G.jsx)(X4,{archiveId:e.id,archiveName:e.print_name||e.filename,printerName:t,onClose:()=>z(!1)}),I&&e.timelapse_path&&(0,G.jsx)(Y4,{src:Z.getArchiveTimelapse(e.id),title:f(`archives.modal.timelapse`,{name:e.print_name||e.filename}),downloadFilename:`${e.print_name||e.filename}_timelapse.mp4`,archiveId:e.id,onClose:()=>L(!1),onEdit:()=>{m.invalidateQueries({queryKey:[`archives`]}),L(!1)}}),B&&ee.length>0&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/80 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-card-dark rounded-lg max-w-lg w-full max-h-[80vh] flex flex-col`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-gray-700`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white`,children:f(`archives.modal.selectTimelapse`)}),(0,G.jsx)(`p`,{className:`text-sm text-gray-400 mt-1`,children:f(`archives.modal.selectTimelapseDesc`)})]}),(0,G.jsx)(`button`,{onClick:()=>{V(!1),te([])},className:`text-gray-400 hover:text-white p-1`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(`div`,{className:`overflow-y-auto flex-1 p-2`,children:ee.map(e=>(0,G.jsxs)(`button`,{onClick:()=>Re.mutate(e.name),disabled:Re.isPending,className:`w-full text-left p-3 rounded-lg hover:bg-gray-700 transition-colors flex items-center gap-3 disabled:opacity-50`,children:[(0,G.jsx)(pc,{className:`w-8 h-8 text-bambu-green flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium truncate`,children:e.name}),(0,G.jsxs)(`p`,{className:`text-sm text-gray-400`,children:[Ud(e.size),e.mtime&&` • ${rp(e.mtime,c)}`]})]})]},e.name))}),(0,G.jsx)(`div`,{className:`p-4 border-t border-gray-700`,children:(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{V(!1),te([])},className:`w-full`,children:`Cancel`})})]})}),ne&&(0,G.jsx)(uK,{archiveId:e.id,archiveName:e.print_name||e.filename,onClose:()=>re(!1)}),ie&&e.photos&&e.photos.length>0&&(0,G.jsx)(dK,{archiveId:e.id,archiveName:e.print_name||e.filename,photos:e.photos,onClose:()=>ae(!1),onDelete:async t=>{try{await Z.deleteArchivePhoto(e.id,t),m.invalidateQueries({queryKey:[`archives`]}),h(f(`archives.toast.photoDeleted`))}catch{h(f(`archives.toast.failedDeletePhoto`),`error`)}}}),oe&&(0,G.jsx)(J4,{archiveId:e.id,archiveName:e.print_name||e.filename,onClose:()=>se(!1)}),(0,G.jsx)(`input`,{ref:xe,type:`file`,accept:`.3mf`,className:`hidden`,onChange:e=>{let t=e.target.files?.[0];t&&Ne.mutate(t),e.target.value=``}}),(0,G.jsx)(`input`,{ref:Se,type:`file`,accept:`.f3d`,className:`hidden`,onChange:e=>{let t=e.target.files?.[0];t&&Fe.mutate(t),e.target.value=``}}),(0,G.jsx)(`input`,{ref:Ce,type:`file`,accept:`.mp4,.avi,.mkv`,className:`hidden`,onChange:e=>{let t=e.target.files?.[0];t&&Me.mutate(t),e.target.value=``}})]})}function FBe({archive:e,printerName:t,isSelected:n,onSelect:r,selectionMode:i,projects:a,isHighlighted:o,preferredSlicer:s=`bambu_studio`,useSlicerApi:c=!1,t:l,onNavigateToArchive:u}){let d=co(),{showToast:f}=Gd(),{hasPermission:p,canModify:m}=jd(),[h,g]=(0,y.useState)(!1),[_,v]=(0,y.useState)(!1),[b,x]=(0,y.useState)(!1),[S,C]=(0,y.useState)(!1),w=K({queryKey:[`archive`,e.id,`delete-impact`],queryFn:()=>Z.getArchiveDeleteImpact(e.id),enabled:b,staleTime:0}),T=or(),[E,D]=(0,y.useState)(!1),[O,k]=(0,y.useState)(!1),[A,j]=(0,y.useState)(!1),[M,N]=(0,y.useState)(!1),[P,F]=(0,y.useState)(!1),[I,L]=(0,y.useState)(!1),[R,z]=(0,y.useState)([]),[B,V]=(0,y.useState)(!1),[ee,te]=(0,y.useState)(!1),[ne,re]=(0,y.useState)(!1),[ie,ae]=(0,y.useState)(!1),[oe,se]=(0,y.useState)(!1),[H,ce]=(0,y.useState)(!1),[le,ue]=(0,y.useState)(null),de=(0,y.useRef)(null),fe=(0,y.useRef)(null),pe=(0,y.useRef)(null),[me,he]=(0,y.useState)(null),ge=e.duplicate_sequence??0,_e=e.original_archive_id??null,ve=async()=>{try{let t=await Z.getArchivePlates(e.id);if(t.is_multi_plate&&t.plates.length>1){he(t.plates);return}}catch{}T(`/gcode-viewer?archive=${e.id}`)},ye=q({mutationFn:()=>Z.deleteArchiveTimelapse(e.id),onSuccess:()=>{d.invalidateQueries({queryKey:[`archives`]}),f(l(`archives.toast.timelapseRemoved`))},onError:e=>{f(e.message||l(`archives.toast.failedRemoveTimelapse`),`error`)}}),be=q({mutationFn:t=>Z.uploadArchiveTimelapse(e.id,t),onSuccess:e=>{d.invalidateQueries({queryKey:[`archives`]}),f(l(`archives.toast.timelapseUploaded`,{filename:e.filename}))},onError:e=>{f(e.message||l(`archives.toast.failedUploadTimelapse`),`error`)}}),xe=q({mutationFn:t=>Z.uploadSource3mf(e.id,t),onSuccess:e=>{d.invalidateQueries({queryKey:[`archives`]}),f(l(`archives.toast.source3mfAttached`,{filename:e.filename}))},onError:e=>{f(e.message||l(`archives.toast.failedUploadSource3mf`),`error`)}}),Se=q({mutationFn:()=>Z.deleteSource3mf(e.id),onSuccess:()=>{d.invalidateQueries({queryKey:[`archives`]}),f(l(`archives.toast.source3mfRemoved`))},onError:e=>{f(e.message||l(`archives.toast.failedRemoveSource3mf`),`error`)}}),Ce=q({mutationFn:t=>Z.uploadF3d(e.id,t),onSuccess:e=>{d.invalidateQueries({queryKey:[`archives`]}),f(l(`archives.toast.f3dAttached`,{filename:e.filename}))},onError:e=>{f(e.message||l(`archives.toast.failedUploadF3d`),`error`)}}),we=q({mutationFn:()=>Z.deleteF3d(e.id),onSuccess:()=>{d.invalidateQueries({queryKey:[`archives`]}),f(l(`archives.toast.f3dRemoved`))},onError:e=>{f(e.message||l(`archives.toast.failedRemoveF3d`),`error`)}}),Te=q({mutationFn:()=>Z.scanArchiveTimelapse(e.id),onSuccess:e=>{e.status===`attached`?(d.invalidateQueries({queryKey:[`archives`]}),f(l(`archives.toast.timelapseAttached`,{filename:e.filename}))):e.status===`exists`?f(l(`archives.toast.timelapseAlreadyAttached`)):e.status===`not_found`&&e.available_files&&e.available_files.length>0?(z(e.available_files),L(!0)):f(e.message||l(`archives.toast.noMatchingTimelapse`),`warning`)},onError:e=>{f(e.message||l(`archives.toast.failedScanTimelapse`),`error`)}}),Ee=q({mutationFn:t=>Z.selectArchiveTimelapse(e.id,t),onSuccess:e=>{d.invalidateQueries({queryKey:[`archives`]}),f(l(`archives.toast.timelapseAttached`,{filename:e.filename})),L(!1),z([])},onError:e=>{f(e.message||l(`archives.toast.failedAttachTimelapse`),`error`)}}),De=q({mutationFn:t=>Z.deleteArchive(e.id,t),onSuccess:()=>{tK(d),f(l(`archives.toast.archiveDeleted`))},onError:()=>{f(l(`archives.toast.failedDeleteArchive`),`error`)}}),Oe=q({mutationFn:()=>Z.toggleFavorite(e.id),onSuccess:e=>{d.invalidateQueries({queryKey:[`archives`]}),f(e.is_favorite?l(`archives.toast.addedToFavorites`):l(`archives.toast.removedFromFavorites`))}}),{data:ke}=K({queryKey:[`archive-folders`,e.id],queryFn:()=>Z.getLibraryFoldersByArchive(e.id)}),Ae=q({mutationFn:t=>Z.updateArchive(e.id,{project_id:t}),onSuccess:()=>{tK(d),f(l(`archives.toast.projectUpdated`))},onError:()=>{f(l(`archives.toast.failedUpdateProject`),`error`)}}),je=e=>{e.preventDefault(),ue({x:e.clientX,y:e.clientY})},Me=[...n3(e)?[{label:l(`common.print`),icon:(0,G.jsx)(Ll,{className:`w-4 h-4`}),onClick:()=>D(!0),disabled:!e.file_path||!p(`queue:create`)||!m(`archives`,`reprint`,e.created_by_id),title:e.file_path?p(`queue:create`)?m(`archives`,`reprint`,e.created_by_id)?void 0:l(`archives.permission.noReprint`):l(`archives.permission.noAddToQueue`):l(`archives.card.noFileForReprint`)},{label:l(`archives.menu.openInBambuStudio`),icon:(0,G.jsx)(nc,{className:`w-4 h-4`}),onClick:()=>{let t=e.print_name||e.filename||`model`;r3(e.id,t,`file`,s)},disabled:!e.file_path,title:e.file_path?void 0:l(`archives.card.noFileForReprint`)}]:[{label:l(`archives.menu.slice`),icon:c?(0,G.jsx)(Rs,{className:`w-4 h-4`}):(0,G.jsx)(nc,{className:`w-4 h-4`}),onClick:()=>{if(c)k(!0);else{let t=e.print_name||e.filename||`model`;r3(e.id,t,`file`,s)}}},...c?[{label:l(`library.runWithPipeline.actionLabel`),icon:(0,G.jsx)(Ml,{className:`w-4 h-4`}),onClick:()=>j(!0),disabled:!p(`pipelines:run`),title:p(`pipelines:run`)?void 0:l(`library.runWithPipeline.noPermission`)}]:[]],{label:e.external_url?l(`archives.menu.externalLink`):l(`archives.menu.viewOnMakerWorld`),icon:(0,G.jsx)(kc,{className:`w-4 h-4`}),onClick:()=>{let t=e.external_url||e.makerworld_url;t&&window.open(t,`_blank`)},disabled:!e.external_url&&!e.makerworld_url},{label:``,divider:!0,onClick:()=>{}},{label:l(`archives.menu.preview3d`),icon:(0,G.jsx)(Zo,{className:`w-4 h-4`}),onClick:()=>{ve()}},{label:l(`archives.menu.viewTimelapse`),icon:(0,G.jsx)(pc,{className:`w-4 h-4`}),onClick:()=>N(!0),disabled:!e.timelapse_path},{label:l(`archives.menu.scanForTimelapse`),icon:(0,G.jsx)(Yl,{className:`w-4 h-4`}),onClick:()=>Te.mutate(),disabled:!e.printer_id||!!e.timelapse_path||Te.isPending||!m(`archives`,`update`,e.created_by_id),title:m(`archives`,`update`,e.created_by_id)?void 0:l(`archives.permission.noUpdateArchives`)},{label:l(`archives.menu.uploadTimelapse`),icon:(0,G.jsx)(Bu,{className:`w-4 h-4`}),onClick:()=>pe.current?.click(),disabled:!!e.timelapse_path||!m(`archives`,`update`,e.created_by_id),title:m(`archives`,`update`,e.created_by_id)?void 0:l(`archives.permission.noUpdateArchives`)},...e.timelapse_path?[{label:l(`archives.menu.removeTimelapse`),icon:(0,G.jsx)(Nu,{className:`w-4 h-4`}),onClick:()=>ce(!0),danger:!0,disabled:!m(`archives`,`update`,e.created_by_id),title:m(`archives`,`update`,e.created_by_id)?void 0:l(`archives.permission.noUpdateArchives`)}]:[],{label:``,divider:!0,onClick:()=>{}},{label:e.source_3mf_path?l(`archives.menu.downloadSource3mf`):l(`archives.menu.uploadSource3mf`),icon:(0,G.jsx)(sc,{className:`w-4 h-4`}),onClick:()=>{e.source_3mf_path?Z.downloadSource3mf(e.id).catch(e=>{console.error(`Source 3MF download failed:`,e)}):de.current?.click()},disabled:!e.source_3mf_path&&!m(`archives`,`update`,e.created_by_id),title:!e.source_3mf_path&&!m(`archives`,`update`,e.created_by_id)?l(`archives.permission.noUploadFiles`):void 0},...e.source_3mf_path?[{label:l(`archives.menu.replaceSource3mf`),icon:(0,G.jsx)(Bu,{className:`w-4 h-4`}),onClick:()=>de.current?.click(),disabled:!m(`archives`,`update`,e.created_by_id),title:m(`archives`,`update`,e.created_by_id)?void 0:l(`archives.permission.noUpdateArchives`)},{label:l(`archives.menu.removeSource3mf`),icon:(0,G.jsx)(Nu,{className:`w-4 h-4`}),onClick:()=>ae(!0),danger:!0,disabled:!m(`archives`,`update`,e.created_by_id),title:m(`archives`,`update`,e.created_by_id)?void 0:l(`archives.permission.noUpdateArchives`)}]:[],{label:e.f3d_path?l(`archives.menu.replaceF3d`):l(`archives.menu.uploadF3d`),icon:(0,G.jsx)(Zo,{className:`w-4 h-4`}),onClick:()=>fe.current?.click(),disabled:!m(`archives`,`update`,e.created_by_id),title:m(`archives`,`update`,e.created_by_id)?void 0:l(`archives.permission.noUpdateArchives`)},...e.f3d_path?[{label:l(`archives.menu.downloadF3d`),icon:(0,G.jsx)(Ys,{className:`w-4 h-4`}),onClick:()=>{Z.downloadF3d(e.id).catch(e=>{console.error(`F3D download failed:`,e)})}},{label:l(`archives.menu.removeF3d`),icon:(0,G.jsx)(Nu,{className:`w-4 h-4`}),onClick:()=>se(!0),danger:!0,disabled:!m(`archives`,`update`,e.created_by_id),title:m(`archives`,`update`,e.created_by_id)?void 0:l(`archives.permission.noUpdateArchives`)}]:[],{label:``,divider:!0,onClick:()=>{}},{label:l(`archives.menu.download`),icon:(0,G.jsx)(Ys,{className:`w-4 h-4`}),onClick:()=>{Z.downloadArchive(e.id,`${e.print_name||e.filename}.3mf`).catch(e=>{console.error(`Archive download failed:`,e)})},disabled:!p(`archives:read`),title:p(`archives:read`)?void 0:l(`archives.permission.noDownload`)},{label:l(`archives.menu.copyDownloadLink`),icon:(0,G.jsx)(Vs,{className:`w-4 h-4`}),onClick:()=>{let t=`${window.location.origin}${Z.getArchiveDownload(e.id)}`;navigator.clipboard.writeText(t).then(()=>{f(l(`archives.toast.linkCopied`))}).catch(()=>{f(l(`archives.toast.failedCopyLink`),`error`)})},disabled:!p(`archives:read`),title:p(`archives:read`)?void 0:l(`archives.permission.noCopyLink`)},{label:l(`archives.menu.qrCode`),icon:(0,G.jsx)(Rl,{className:`w-4 h-4`}),onClick:()=>V(!0)},{label:e.photos?.length?l(`archives.menu.viewPhotosCount`,{count:e.photos.length}):l(`archives.menu.viewPhotos`),icon:(0,G.jsx)(ss,{className:`w-4 h-4`}),onClick:()=>te(!0),disabled:!e.photos?.length},{label:l(`archives.menu.projectPage`),icon:(0,G.jsx)(dc,{className:`w-4 h-4`}),onClick:()=>re(!0)},{label:``,divider:!0,onClick:()=>{}},{label:e.is_favorite?l(`archives.menu.removeFromFavorites`):l(`archives.menu.addToFavorites`),icon:(0,G.jsx)(bu,{className:`w-4 h-4 ${e.is_favorite?`fill-yellow-400 text-yellow-400`:m(`archives`,`update`,e.created_by_id)?`group-hover:text-yellow-400`:``}`}),onClick:()=>Oe.mutate(),disabled:!m(`archives`,`update`,e.created_by_id),title:m(`archives`,`update`,e.created_by_id)?void 0:l(`archives.permission.noUpdateArchives`)},{label:l(`archives.menu.edit`),icon:(0,G.jsx)(kl,{className:`w-4 h-4`}),onClick:()=>g(!0),disabled:!m(`archives`,`update`,e.created_by_id),title:m(`archives`,`update`,e.created_by_id)?void 0:l(`archives.permission.noUpdateArchives`)},{label:l(`archives.menu.printLog`),icon:(0,G.jsx)(Rc,{className:`w-4 h-4`}),onClick:()=>v(!0)},...e.project_id&&e.project_name?[{label:l(`archives.menu.goToProject`,{name:e.project_name}),icon:(0,G.jsx)(gc,{className:`w-4 h-4 text-bambu-green`}),onClick:()=>window.location.href=`/projects`}]:[],{label:l(`archives.menu.addToProject`),icon:(0,G.jsx)(gc,{className:`w-4 h-4`}),onClick:()=>{},submenuSearchPlaceholder:nK(a??[],e.project_id).length>5?l(`archives.menu.searchProjects`):void 0,submenu:(()=>{let t=[];if(e.project_id&&t.push({label:l(`archives.menu.removeFromProject`),icon:(0,G.jsx)(td,{className:`w-4 h-4`}),onClick:()=>Ae.mutate(null)}),!a)t.push({label:l(`archives.menu.loading`),icon:(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),onClick:()=>{},disabled:!0});else{let n=nK(a,e.project_id).sort((e,t)=>e.name.localeCompare(t.name));n.length===0?t.push({label:l(`archives.menu.noProjectsAvailable`),icon:(0,G.jsx)(gc,{className:`w-4 h-4 opacity-50`}),onClick:()=>{},disabled:!0}):n.forEach(n=>{t.push({label:n.name,icon:(0,G.jsx)(`div`,{className:`w-3 h-3 rounded-full flex-shrink-0`,style:{backgroundColor:n.color||`#888`}}),onClick:()=>Ae.mutate(n.id),disabled:e.project_id===n.id})})}return t})()},{label:l(n?`archives.menu.deselect`:`archives.menu.select`),icon:n?(0,G.jsx)(_u,{className:`w-4 h-4`}):(0,G.jsx)(yu,{className:`w-4 h-4`}),onClick:()=>r(e.id)},{label:``,divider:!0,onClick:()=>{}},{label:l(`archives.menu.delete`),icon:(0,G.jsx)(Nu,{className:`w-4 h-4`}),onClick:()=>x(!0),danger:!0,disabled:!m(`archives`,`delete`,e.created_by_id),title:m(`archives`,`delete`,e.created_by_id)?void 0:l(`archives.permission.noDelete`)}];return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{"data-archive-id":e.id,className:`grid grid-cols-12 gap-4 px-4 py-3 items-center hover:bg-bambu-dark-tertiary/30 ${n?`bg-bambu-green/10`:``}`,style:o?{outline:`4px solid #facc15`,outlineOffset:`-4px`}:void 0,onContextMenu:je,children:[(0,G.jsxs)(`div`,{className:`col-span-1 flex items-center gap-2`,children:[i&&(0,G.jsx)(`button`,{onClick:()=>r(e.id),children:n?(0,G.jsx)(_u,{className:`w-4 h-4 text-bambu-green`}):(0,G.jsx)(yu,{className:`w-4 h-4 text-bambu-gray`})}),e.thumbnail_path?(0,G.jsx)(`img`,{src:Z.getArchiveThumbnail(e.id),alt:``,className:`w-10 h-10 object-cover rounded`}):(0,G.jsx)(`div`,{className:`w-10 h-10 bg-bambu-dark rounded flex items-center justify-center`,children:(0,G.jsx)(Vc,{className:`w-5 h-5 text-bambu-dark-tertiary`})})]}),(0,G.jsxs)(`div`,{className:`col-span-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`p`,{className:`text-white text-sm truncate`,children:e.print_name||e.filename}),(e.status===`failed`||e.status===`aborted`)&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 rounded text-[10px] leading-tight bg-status-error/80 text-white flex-shrink-0`,children:e.status===`aborted`?l(`archives.card.cancelled`):l(`archives.card.failed`)}),e.duplicate_count>0&&ge>0&&_e&&(0,G.jsxs)(`button`,{onClick:e=>{e.stopPropagation(),u?.(_e)},className:`px-1.5 py-0.5 rounded text-[10px] leading-tight bg-purple-500/80 hover:bg-purple-600/90 text-white flex-shrink-0 transition-colors flex items-center gap-1`,title:l(`archives.viewOriginalPrint`,{id:_e}),children:[(0,G.jsx)(Vs,{className:`w-3 h-3`}),`#`,ge]}),e.duplicate_count>0&&ge===0&&(0,G.jsxs)(`span`,{className:`px-1.5 py-0.5 rounded text-[10px] leading-tight bg-purple-500/80 text-white flex-shrink-0 flex items-center gap-1`,title:`${e.duplicate_count} reprint${e.duplicate_count===1?``:`s`}`,children:[(0,G.jsx)(Ec,{className:`w-3 h-3`}),`+`,e.duplicate_count]}),e.timelapse_path&&(0,G.jsx)(`span`,{title:l(`archives.list.hasTimelapse`),children:(0,G.jsx)(pc,{className:`w-3.5 h-3.5 text-bambu-green flex-shrink-0`})}),ke&&ke.length>0&&(0,G.jsx)(Ai,{to:`/files?folder=${ke[0].id}`,className:`flex-shrink-0`,title:l(`archives.card.openFolder`,{name:ke[0].name}),onClick:e=>e.stopPropagation(),children:(0,G.jsx)(_c,{className:`w-3.5 h-3.5 text-yellow-600 dark:text-yellow-400`})})]}),(e.filament_type||e.sliced_for_model)&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 mt-0.5`,children:[e.sliced_for_model&&(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray flex items-center gap-1`,title:l(`archives.card.slicedFor`,{model:e.sliced_for_model}),children:[(0,G.jsx)(Ll,{className:`w-2.5 h-2.5`}),e.sliced_for_model]}),(()=>{let t=kW(e.bed_type);return t?(0,G.jsx)(`img`,{src:t.icon,alt:t.label,title:t.label,className:`w-3.5 h-3.5 flex-shrink-0`}):null})(),e.sliced_for_model&&e.filament_type&&(0,G.jsx)(`span`,{className:`text-bambu-gray/50`,children:`·`}),e.filament_type&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:e.filament_type}),e.filament_color&&(0,G.jsx)(`div`,{className:`flex items-center gap-0.5 flex-wrap`,children:e.filament_color.split(`,`).map((e,t)=>(0,G.jsx)(`div`,{className:`w-2.5 h-2.5 rounded-full border border-black/20`,style:{backgroundColor:e},title:e},t))})]})]}),(0,G.jsx)(`div`,{className:`col-span-2 text-sm text-bambu-gray truncate`,children:t}),(0,G.jsxs)(`div`,{className:`col-span-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(`div`,{children:np(e.created_at)}),e.created_by_username&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1 text-xs opacity-75`,title:l(`archives.card.uploadedBy`,{name:e.created_by_username}),children:[(0,G.jsx)(Vu,{className:`w-3 h-3`}),e.created_by_username]})]}),(0,G.jsx)(`div`,{className:`col-span-1 text-sm text-bambu-gray`,children:Ud(e.file_size)}),(0,G.jsxs)(`div`,{className:`col-span-2 flex justify-end gap-1`,children:[n3(e)&&(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>D(!0),disabled:!e.file_path||!p(`queue:create`)||!m(`archives`,`reprint`,e.created_by_id),title:e.file_path?p(`queue:create`)?m(`archives`,`reprint`,e.created_by_id)?l(`common.print`):l(`archives.card.noPermissionReprint`):l(`archives.permission.noAddToQueue`):l(`archives.card.noFileForReprint`),className:`text-bambu-green hover:text-bambu-green-light hover:bg-bambu-green/10`,children:(0,G.jsx)(Ml,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>{let t=e.print_name||e.filename||`model`;r3(e.id,t,`file`,s)},title:l(`archives.card.openInBambuStudio`),children:(0,G.jsx)(nc,{className:`w-4 h-4`})}),(e.external_url||e.makerworld_url)&&(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>window.open(e.external_url||e.makerworld_url,`_blank`),title:e.external_url?l(`archives.card.externalLink`):`MakerWorld`,children:(0,G.jsx)(kc,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>F(!0),disabled:!e.timelapse_path&&(!p(`printers:files`)||!e.printer_id||!e.started_at),title:!e.timelapse_path&&!p(`printers:files`)?l(`printers.permission.noFiles`):l(`archives.media.download`),children:(0,G.jsx)(pc,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>{Z.downloadArchive(e.id,`${e.print_name||e.filename}.3mf`).catch(e=>{console.error(`Archive download failed:`,e)})},title:l(`archives.card.download`),children:(0,G.jsx)(Ys,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>g(!0),disabled:!m(`archives`,`update`,e.created_by_id),title:m(`archives`,`update`,e.created_by_id)?l(`archives.card.edit`):l(`archives.card.noPermissionEdit`),children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>x(!0),disabled:!m(`archives`,`delete`,e.created_by_id),title:m(`archives`,`delete`,e.created_by_id)?l(`archives.card.delete`):l(`archives.card.noPermissionDelete`),children:(0,G.jsx)(Nu,{className:`w-4 h-4 text-red-600 dark:text-red-400`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:e=>{let t=e.currentTarget.getBoundingClientRect();ue({x:t.left,y:t.bottom+4})},title:l(`archives.card.moreOptions`),children:(0,G.jsx)(Qs,{className:`w-4 h-4`})})]})]}),h&&(0,G.jsx)(sK,{archive:e,onClose:()=>g(!1)}),_&&(0,G.jsx)(cK,{archiveId:e.id,archiveName:e.print_name||e.filename,onClose:()=>v(!1)}),me&&(0,G.jsx)(OG,{plates:me,onSelect:t=>{he(null),T(`/gcode-viewer?archive=${e.id}&plate=${t}`)},onClose:()=>he(null)}),E&&(0,G.jsx)(qW,{mode:`create`,archiveId:e.id,archiveName:e.print_name||e.filename,onClose:()=>D(!1)}),O&&(0,G.jsx)(KG,{source:{kind:`archive`,id:e.id,filename:e.print_name||e.filename||`model`},onClose:()=>k(!1)}),A&&(0,G.jsx)(YG,{source:{kind:`archive`,id:e.id,filename:e.print_name||e.filename||`model`},onClose:()=>j(!1)}),b&&(0,G.jsxs)(rf,{title:l(`archives.modal.deleteArchive`),message:l(`archives.modal.deleteConfirm`,{name:e.print_name||e.filename}),confirmText:l(`archives.modal.deleteButton`),variant:`danger`,confirmDisabled:(w.data?.currently_printing??0)>0,onConfirm:()=>{De.mutate(S),x(!1),C(!1)},onCancel:()=>{x(!1),C(!1)},children:[(w.data?.related_queue_items??0)>0&&(0,G.jsx)(`div`,{className:(w.data?.currently_printing??0)>0?`text-sm text-red-600 dark:text-red-400 mb-2`:`text-sm text-amber-600 dark:text-amber-400 mb-2`,children:(w.data?.currently_printing??0)>0?l(`archives.modal.deleteBlockedByPrinting`,{count:w.data.currently_printing}):l(`archives.modal.deleteQueueItemsWarning`,{count:w.data.related_queue_items})}),(0,G.jsxs)(`label`,{className:`flex items-start gap-2 cursor-pointer text-sm text-bambu-gray`,children:[(0,G.jsx)(`input`,{type:`checkbox`,className:`mt-0.5 accent-red-500`,checked:S,onChange:e=>C(e.target.checked)}),(0,G.jsx)(`span`,{children:l(`archives.modal.deletePurgeStats`)})]})]}),ie&&(0,G.jsx)(rf,{title:l(`archives.modal.removeSource3mf`),message:l(`archives.modal.removeSource3mfConfirm`,{name:e.print_name||e.filename}),confirmText:l(`archives.modal.removeButton`),variant:`danger`,onConfirm:()=>{Se.mutate(),ae(!1)},onCancel:()=>ae(!1)}),oe&&(0,G.jsx)(rf,{title:l(`archives.modal.removeF3d`),message:l(`archives.modal.removeF3dConfirm`,{name:e.print_name||e.filename}),confirmText:l(`archives.modal.removeButton`),variant:`danger`,onConfirm:()=>{we.mutate(),se(!1)},onCancel:()=>se(!1)}),H&&(0,G.jsx)(rf,{title:l(`archives.modal.removeTimelapse`),message:l(`archives.modal.removeTimelapseConfirm`,{name:e.print_name||e.filename}),confirmText:l(`archives.modal.removeButton`),variant:`danger`,onConfirm:()=>{ye.mutate(),ce(!1)},onCancel:()=>ce(!1)}),le&&(0,G.jsx)(FT,{x:le.x,y:le.y,items:Me,onClose:()=>ue(null)}),P&&(0,G.jsx)(X4,{archiveId:e.id,archiveName:e.print_name||e.filename,printerName:t,onClose:()=>F(!1)}),M&&e.timelapse_path&&(0,G.jsx)(Y4,{src:Z.getArchiveTimelapse(e.id),title:l(`archives.modal.timelapse`,{name:e.print_name||e.filename}),downloadFilename:`${e.print_name||e.filename}_timelapse.mp4`,archiveId:e.id,onClose:()=>N(!1),onEdit:()=>{d.invalidateQueries({queryKey:[`archives`]}),N(!1)}}),I&&R.length>0&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/80 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-card-dark rounded-lg max-w-lg w-full max-h-[80vh] flex flex-col`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-gray-700`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white`,children:l(`archives.modal.selectTimelapse`)}),(0,G.jsx)(`p`,{className:`text-sm text-gray-400 mt-1`,children:l(`archives.modal.selectTimelapseDesc`)})]}),(0,G.jsx)(`button`,{onClick:()=>{L(!1),z([])},className:`text-gray-400 hover:text-white p-1`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(`div`,{className:`overflow-y-auto flex-1 p-2`,children:R.map(e=>(0,G.jsxs)(`button`,{onClick:()=>Ee.mutate(e.name),disabled:Ee.isPending,className:`w-full text-left p-3 rounded-lg hover:bg-gray-700 transition-colors mb-1`,children:[(0,G.jsx)(`div`,{className:`font-medium text-white`,children:e.name}),(0,G.jsxs)(`div`,{className:`text-sm text-gray-400 flex gap-3`,children:[(0,G.jsx)(`span`,{children:Ud(e.size)}),e.mtime&&(0,G.jsx)(`span`,{children:np(e.mtime)})]})]},e.name))})]})}),B&&(0,G.jsx)(uK,{archiveId:e.id,archiveName:e.print_name||e.filename,onClose:()=>V(!1)}),ee&&e.photos&&(0,G.jsx)(dK,{archiveId:e.id,archiveName:e.print_name||e.filename,photos:e.photos,onClose:()=>te(!1),onDelete:async t=>{try{await Z.deleteArchivePhoto(e.id,t),d.invalidateQueries({queryKey:[`archives`]}),f(l(`archives.toast.photoDeleted`))}catch{f(l(`archives.toast.failedDeletePhoto`),`error`)}}}),ne&&(0,G.jsx)(J4,{archiveId:e.id,archiveName:e.print_name||e.filename,onClose:()=>re(!1)}),(0,G.jsx)(`input`,{ref:de,type:`file`,accept:`.3mf`,className:`hidden`,onChange:e=>{let t=e.target.files?.[0];t&&xe.mutate(t),e.target.value=``}}),(0,G.jsx)(`input`,{ref:fe,type:`file`,accept:`.f3d`,className:`hidden`,onChange:e=>{let t=e.target.files?.[0];t&&Ce.mutate(t),e.target.value=``}}),(0,G.jsx)(`input`,{ref:pe,type:`file`,accept:`.mp4,.avi,.mkv`,className:`hidden`,onChange:e=>{let t=e.target.files?.[0];t&&be.mutate(t),e.target.value=``}})]})}var IBe=[`completed`,`failed`,`aborted`,`cancelled`,`stopped`],LBe=[{id:`all`,label:`All Archives`,icon:(0,G.jsx)(_c,{className:`w-4 h-4`})},{id:`recent`,label:`Last 24 Hours`,icon:(0,G.jsx)(js,{className:`w-4 h-4`})},{id:`this-week`,label:`This Week`,icon:(0,G.jsx)(as,{className:`w-4 h-4`})},{id:`this-month`,label:`This Month`,icon:(0,G.jsx)(as,{className:`w-4 h-4`})},{id:`favorites`,label:`Favorites`,icon:(0,G.jsx)(bu,{className:`w-4 h-4`})},{id:`not-printed`,label:`Not Printed`,icon:(0,G.jsx)(Bu,{className:`w-4 h-4`})},{id:`printed`,label:`Printed`,icon:(0,G.jsx)(Ll,{className:`w-4 h-4`})},{id:`failed`,label:`Failed Prints`,icon:(0,G.jsx)(ys,{className:`w-4 h-4`})},{id:`duplicates`,label:`Duplicates`,icon:(0,G.jsx)(Vs,{className:`w-4 h-4`})}];function RBe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),{hasPermission:r,hasAnyPermission:i}=jd(),a=(0,y.useRef)(null),[o,s]=(0,y.useState)(``),[c,l]=(0,y.useState)(()=>{let e=localStorage.getItem(`archiveFilterPrinter`);return e?Number(e):null}),[u,d]=(0,y.useState)(()=>localStorage.getItem(`archiveFilterMaterial`)),[f,p]=(0,y.useState)(()=>{let e=localStorage.getItem(`archiveFilterColors`);return e?new Set(JSON.parse(e)):new Set}),[m,h]=(0,y.useState)(()=>localStorage.getItem(`archiveColorFilterMode`)||`or`),[g,_]=(0,y.useState)(()=>localStorage.getItem(`archiveFilterFavorites`)===`true`),[v,b]=(0,y.useState)(()=>localStorage.getItem(`archiveHideFailed`)===`true`),[x,S]=(0,y.useState)(()=>localStorage.getItem(`archiveHideDuplicates`)===`true`),[C,w]=(0,y.useState)(()=>localStorage.getItem(`archiveFilterTag`)),[T,E]=(0,y.useState)(()=>localStorage.getItem(`archiveFilterFileType`)||`all`),[D,O]=(0,y.useState)(!1),[k,A]=(0,y.useState)([]),[j,M]=(0,y.useState)(new Set),[N,P]=(0,y.useState)(()=>localStorage.getItem(`archiveNo3MFWarningDismissed`)===`true`),{data:F}=K({queryKey:[`archives`,`no-3mf-warning`],queryFn:Z.getNo3MFWarning,staleTime:300*1e3,enabled:!N}),I=()=>{localStorage.setItem(`archiveNo3MFWarningDismissed`,`true`),P(!0)},L=F?.reason===`ftps_cooloff`?`FtpsCooloff`:F?.reason===`ftp_transfer_failed`?`FtpTransferFailed`:F?.reason===`internal_storage`?`InternalStorage`:F?.reason===`no_external_storage`?`NoExternalStorage`:F?.reason===`internal_history`?`InternalHistory`:``,R=F?.reason===`ftps_cooloff`?`https://wiki.bambuddy.cool/reference/troubleshooting/#ftps-tls-failure`:F?.reason===`ftp_transfer_failed`?`https://wiki.bambuddy.cool/reference/troubleshooting/#ftp-transfer-timed-out`:F?.reason===`internal_storage`?`https://wiki.bambuddy.cool/reference/troubleshooting/#archive-card-has-only-a-name`:F?.reason===`no_external_storage`?null:F?.reason===`internal_history`?`https://wiki.bambuddy.cool/reference/troubleshooting/#print-started-on-the-printer-has-no-thumbnail`:`https://wiki.bambuddy.cool/getting-started/#step-4-enable-store-sent-files-on-external-storage`,[z,B]=(0,y.useState)(!1),[V,ee]=(0,y.useState)(!1),[te,ne]=(0,y.useState)(!1),[re,ie]=(0,y.useState)(!1),[ae,oe]=(0,y.useState)(()=>localStorage.getItem(`archiveViewMode`)||`grid`),[se,H]=(0,y.useState)(()=>localStorage.getItem(`archiveSortBy`)||`date-desc`),[ce,le]=(0,y.useState)(()=>localStorage.getItem(`archiveCollection`)||`all`),[ue,de]=(0,y.useState)(0),[fe,pe]=(0,y.useState)(()=>{try{let e=localStorage.getItem(`archivePageSize`);return e?Number(e):50}catch{return 50}}),[me,he]=(0,y.useState)(!1),[ge,_e]=(0,y.useState)(!1),[ve,ye]=(0,y.useState)(!1),[be,xe]=(0,y.useState)(!1),[Se,Ce]=(0,y.useState)(!1),[we,Te]=(0,y.useState)(null),[Ee,De]=(0,y.useState)(null),[Oe,ke]=(0,y.useState)(()=>localStorage.getItem(`logFilterUser`)||null),[Ae,je]=(0,y.useState)(()=>localStorage.getItem(`logFilterStatus`)),[Me,Ne]=(0,y.useState)(()=>localStorage.getItem(`logFilterDateFrom`)||``),[Pe,Fe]=(0,y.useState)(()=>localStorage.getItem(`logFilterDateTo`)||``),[Ie,Le]=(0,y.useState)(()=>{let e=localStorage.getItem(`logOffset`);return e?Number(e):0}),[Re,ze]=(0,y.useState)(!1),[Be,Ve]=(0,y.useState)(null),[He,Ue]=(0,y.useState)(null),[We,Ge]=(0,y.useState)(``),[Ke,qe]=(0,y.useState)(``),[Je,Ye]=(0,y.useState)(()=>{let e=localStorage.getItem(`logPageSize`);return e?Number(e):25}),[Xe,Ze]=(0,y.useState)(kBe),[Qe,$e]=(0,y.useState)(!1),[et,tt]=(0,y.useState)(jBe),nt=(0,y.useMemo)(()=>Xe.filter(e=>e.visible).map(e=>e.id),[Xe]),rt=(0,y.useCallback)(e=>{De(e),Te(e)},[]);(0,y.useEffect)(()=>{if(we){let t=setTimeout(()=>{let t=document.querySelector(`[data-archive-id="${we}"]`);t?t.scrollIntoView({behavior:`smooth`,block:`center`}):Ee===we&&n(e(`archives.originalPrintNotVisible`),`warning`),Ee===we&&De(null)},100),r=setTimeout(()=>Te(null),5e3);return()=>{clearTimeout(t),clearTimeout(r)}}},[we,Ee,n,e]);let{data:it,isLoading:at}=K({queryKey:[`archives`,c],queryFn:()=>Z.getArchives(c||void 0)}),{data:ot}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:st}=K({queryKey:[`projects`],queryFn:()=>Z.getProjects()}),{data:ct}=K({queryKey:[`settings`],queryFn:Z.getSettings}),{data:lt}=K({queryKey:[`users`,`slim`],queryFn:Z.getUsersSlim,enabled:ae===`log`}),{data:ut,isLoading:dt}=K({queryKey:[`print-log`,c,Oe,Ae,Me,Pe,o,Ie,Je,et.column,et.direction],queryFn:()=>Z.getPrintLog({search:o||void 0,printerId:c||void 0,username:Oe||void 0,status:Ae||void 0,dateFrom:Me||void 0,dateTo:Pe||void 0,limit:Je,offset:Ie,sortBy:et.column,sortDir:et.direction}),enabled:ae===`log`}),ft=ct?.time_format||`system`,pt=XG(ct?.open_in_slicer,ct?.preferred_slicer),mt=ct?.use_slicer_api??!1,ht=Pf(ct?.currency||`USD`),gt=(0,y.useMemo)(()=>Xe.map(t=>({...t,label:e(Q4[t.id]??t.id)})),[Xe,e]),_t=(0,y.useMemo)(()=>$4.map(t=>({...t,label:e(Q4[t.id]??t.id)})),[e]),vt=(0,y.useCallback)(e=>{t3.has(e)&&(tt(t=>{let n=t.column===e?{column:e,direction:t.direction===`asc`?`desc`:`asc`}:{column:e,direction:[`date`,`completed_at`,`duration`,`filament_used`,`cost`,`energy`,`energy_cost`].includes(e)?`desc`:`asc`};return MBe(n),n}),Le(0))},[]),yt=(0,y.useCallback)(e=>{let t=e.map(e=>({id:e.id,visible:e.visible}));Ze(t),NBe(t)},[]),bt=(0,y.useMemo)(()=>new Set([`duration`,`filament_used`,`cost`,`energy`,`energy_cost`]),[]),xt=(0,y.useCallback)((t,n)=>{switch(t){case`date`:return(0,G.jsx)(`span`,{className:`text-white whitespace-nowrap`,children:rp(n.started_at||n.created_at,ft)});case`completed_at`:return(0,G.jsx)(`span`,{className:`text-bambu-gray-light whitespace-nowrap`,children:n.completed_at?rp(n.completed_at,ft):`—`});case`print_name`:return(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[n.thumbnail_path&&(0,G.jsx)(`img`,{src:Z.getPrintLogThumbnail(n.id),alt:``,className:`w-8 h-8 rounded object-cover flex-shrink-0`,onError:e=>{e.target.style.display=`none`}}),(0,G.jsx)(`span`,{className:`text-white break-words`,title:n.print_name||``,children:n.print_name||`—`})]});case`printer`:return(0,G.jsx)(`span`,{className:`text-bambu-gray-light`,children:n.printer_name||`—`});case`user`:return(0,G.jsx)(`span`,{className:`text-bambu-gray-light`,children:n.created_by_username||`—`});case`status`:return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{className:`inline-flex items-center px-2 py-0.5 rounded-full text-xs font-medium ${n.status===`completed`?`bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-400`:n.status===`failed`?`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`:n.status===`stopped`?`bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`:n.status===`cancelled`?`bg-orange-100 dark:bg-orange-500/20 text-orange-700 dark:text-orange-400`:n.status===`skipped`?`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`:`bg-gray-500/20 text-gray-400`}`,children:n.status}),n.failure_reason&&(0,G.jsx)(`span`,{className:`block text-[10px] text-bambu-gray mt-0.5`,children:e(`editArchive.failureReasons.${n.failure_reason}`,{defaultValue:n.failure_reason})})]});case`duration`:return(0,G.jsx)(`span`,{className:`text-bambu-gray-light whitespace-nowrap`,children:n.duration_seconds?op(n.duration_seconds):`—`});case`filament`:return(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[n.filament_color&&(0,G.jsx)(`div`,{className:`flex items-center gap-0.5 flex-wrap`,children:n.filament_color.split(`,`).map((e,t)=>{let n=e.trim();return(0,G.jsx)(`span`,{className:`w-3 h-3 rounded-full border border-black/20 flex-shrink-0`,style:{backgroundColor:n.startsWith(`#`)?n:void 0},title:n},t)})}),(0,G.jsx)(`span`,{className:`text-bambu-gray-light text-xs`,children:n.filament_type||`—`})]});case`filament_used`:return(0,G.jsx)(`span`,{className:`text-bambu-gray-light whitespace-nowrap tabular-nums`,children:n.filament_used_grams==null?`—`:`${n.filament_used_grams.toFixed(1)} g`});case`cost`:return(0,G.jsx)(`span`,{className:`text-bambu-gray-light whitespace-nowrap tabular-nums`,children:n.cost==null?`—`:`${ht}${n.cost.toFixed(2)}`});case`energy`:return(0,G.jsx)(`span`,{className:`text-bambu-gray-light whitespace-nowrap tabular-nums`,children:n.energy_kwh==null?`—`:`${n.energy_kwh.toFixed(2)} kWh`});case`energy_cost`:return(0,G.jsx)(`span`,{className:`text-bambu-gray-light whitespace-nowrap tabular-nums`,children:n.energy_cost==null?`—`:`${ht}${n.energy_cost.toFixed(2)}`});default:return null}},[ht,e,ft]),St=q({mutationFn:async e=>(await Promise.all(e.map(e=>Z.deleteArchive(e))),e.length),onSuccess:e=>{tK(t),M(new Set),n(`${e} archive${e===1?``:`s`} deleted`)},onError:()=>{n(e(`archives.toast.failedDeleteArchives`),`error`)}}),Ct=q({mutationFn:()=>Z.clearPrintLog(),onSuccess:r=>{t.invalidateQueries({queryKey:[`print-log`]}),Le(0),n(e(`archives.log.cleared`,{count:r.deleted}))},onError:()=>{n(e(`archives.log.clearFailed`),`error`)}}),wt=q({mutationFn:e=>Z.deletePrintLogEntry(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`print-log`]}),t.invalidateQueries({queryKey:[`archives-stats`]}),n(e(`archives.log.entryDeleted`))},onError:()=>{n(e(`archives.log.entryDeleteFailed`),`error`)}}),Tt=q({mutationFn:({id:e,body:t})=>Z.updatePrintLogEntry(e,t),onSuccess:()=>{t.invalidateQueries({queryKey:[`print-log`]}),t.invalidateQueries({queryKey:[`archives-stats`]}),Ue(null),n(e(`archives.log.entryUpdated`))},onError:()=>{n(e(`archives.log.entryUpdateFailed`),`error`)}});(0,y.useEffect)(()=>{c===null?localStorage.removeItem(`archiveFilterPrinter`):localStorage.setItem(`archiveFilterPrinter`,c.toString())},[c]),(0,y.useEffect)(()=>{u?localStorage.setItem(`archiveFilterMaterial`,u):localStorage.removeItem(`archiveFilterMaterial`)},[u]),(0,y.useEffect)(()=>{localStorage.setItem(`archiveFilterColors`,JSON.stringify([...f]))},[f]),(0,y.useEffect)(()=>{localStorage.setItem(`archiveColorFilterMode`,m)},[m]),(0,y.useEffect)(()=>{localStorage.setItem(`archiveFilterFavorites`,g.toString())},[g]),(0,y.useEffect)(()=>{localStorage.setItem(`archiveHideFailed`,v.toString())},[v]),(0,y.useEffect)(()=>{localStorage.setItem(`archiveHideDuplicates`,x.toString())},[x]),(0,y.useEffect)(()=>{C?localStorage.setItem(`archiveFilterTag`,C):localStorage.removeItem(`archiveFilterTag`)},[C]),(0,y.useEffect)(()=>{localStorage.setItem(`archiveFilterFileType`,T)},[T]),(0,y.useEffect)(()=>{de(0)},[o,c,u,f,m,g,v,x,C,T,se,ce]),(0,y.useEffect)(()=>{try{localStorage.setItem(`archivePageSize`,String(fe))}catch{}},[fe]),(0,y.useEffect)(()=>{localStorage.setItem(`archiveViewMode`,ae)},[ae]),(0,y.useEffect)(()=>{localStorage.setItem(`archiveSortBy`,se)},[se]),(0,y.useEffect)(()=>{localStorage.setItem(`archiveCollection`,ce)},[ce]),(0,y.useEffect)(()=>{Oe?localStorage.setItem(`logFilterUser`,Oe):localStorage.removeItem(`logFilterUser`)},[Oe]),(0,y.useEffect)(()=>{Ae?localStorage.setItem(`logFilterStatus`,Ae):localStorage.removeItem(`logFilterStatus`)},[Ae]),(0,y.useEffect)(()=>{Me?localStorage.setItem(`logFilterDateFrom`,Me):localStorage.removeItem(`logFilterDateFrom`)},[Me]),(0,y.useEffect)(()=>{Pe?localStorage.setItem(`logFilterDateTo`,Pe):localStorage.removeItem(`logFilterDateTo`)},[Pe]),(0,y.useEffect)(()=>{localStorage.setItem(`logOffset`,Ie.toString())},[Ie]),(0,y.useEffect)(()=>{localStorage.setItem(`logPageSize`,Je.toString())},[Je]);let Et=(0,y.useMemo)(()=>new Map(ot?.map(e=>[e.id,e.name])||[]),[ot]),Dt=[...new Set(it?.flatMap(e=>e.filament_type?.split(`, `)||[]).filter(Boolean)||[])].sort(),Ot=[...new Set(it?.flatMap(e=>e.filament_color?.split(`,`)||[]).filter(Boolean)||[])],kt=[...new Set(it?.flatMap(e=>e.tags?.split(`,`).map(e=>e.trim())||[]).filter(Boolean)||[])].sort(),At=it?.filter(e=>{let t=new Date,n=ep(e.created_at)||new Date(0),r=!0;switch(ce){case`recent`:r=t.getTime()-n.getTime()<1440*60*1e3;break;case`this-week`:r=t.getTime()-n.getTime()<10080*60*1e3;break;case`this-month`:r=n.getMonth()===t.getMonth()&&n.getFullYear()===t.getFullYear();break;case`favorites`:r=e.is_favorite===!0;break;case`not-printed`:r=e.status===`archived`;break;case`printed`:r=IBe.includes(e.status);break;case`failed`:r=e.status===`failed`||e.status===`aborted`;break;case`duplicates`:r=e.duplicate_count>0;break}let i=(e.print_name||e.filename).toLowerCase().includes(o.toLowerCase()),a=!u||e.filament_type?.split(`, `).includes(u),s=e.filament_color?.split(`,`)||[],c=f.size===0||(m===`or`?s.some(e=>f.has(e)):[...f].every(e=>s.includes(e))),l=ce===`favorites`||!g||e.is_favorite,d=ce===`failed`||!v||e.status!==`failed`&&e.status!==`aborted`,p=ce===`duplicates`||!x||e.duplicate_count===0||e.duplicate_sequence===0,h=e.tags?.split(`,`).map(e=>e.trim())||[],_=!C||h.includes(C),y=n3(e);return r&&i&&a&&c&&l&&d&&p&&_&&(T===`all`||T===`gcode`&&y||T===`source`&&!y)}).sort((e,t)=>{switch(se){case`date-desc`:return(ep(t.created_at)?.getTime()||0)-(ep(e.created_at)?.getTime()||0);case`date-asc`:return(ep(e.created_at)?.getTime()||0)-(ep(t.created_at)?.getTime()||0);case`name-asc`:return(e.print_name||e.filename).localeCompare(t.print_name||t.filename);case`name-desc`:return(t.print_name||t.filename).localeCompare(e.print_name||e.filename);case`size-desc`:return t.file_size-e.file_size;case`size-asc`:return e.file_size-t.file_size;default:return 0}}),jt=At?.length||0,Mt=fe===-1,Nt=Mt?jt||1:fe,Pt=Math.max(1,Math.ceil(jt/Nt)),Ft=Mt?At:At?.slice(ue*Nt,(ue+1)*Nt);(0,y.useEffect)(()=>{if(we&&At&&!Mt){let e=At.findIndex(e=>e.id===we);if(e>=0){let t=Math.floor(e/Nt);t!==ue&&de(t)}}},[we]);let It=z||j.size>0,Lt=e=>{M(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},Rt=()=>{At&&M(new Set(At.map(e=>e.id)))},zt=()=>{M(new Set),B(!1)},Bt=e=>{p(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},Vt=()=>{p(new Set)},Ht=()=>{s(``),l(null),d(null),_(!1),b(!1),S(!1),w(null),E(`all`)},Ut=o||c||u||g||v||x||C||T!==`all`,{isDraggingOver:Wt,dragHandlers:Gt}=rK({disabled:D,extensions:[`.3mf`],onFiles:e=>{A(e),O(!0)},onRejected:()=>n(e(`archives.page.only3mfSupported`),`warning`)}),Kt=(0,y.useCallback)(e=>{let t=e.target;if(t.tagName===`INPUT`||t.tagName===`TEXTAREA`||t.isContentEditable){e.key===`Escape`&&t.blur();return}switch(e.key){case`/`:e.preventDefault(),a.current?.focus();break;case`u`:case`U`:!e.metaKey&&!e.ctrlKey&&(e.preventDefault(),O(!0));break;case`Escape`:It&&zt();break}},[It]);return(0,y.useEffect)(()=>(document.addEventListener(`keydown`,Kt),()=>document.removeEventListener(`keydown`,Kt)),[Kt]),(0,G.jsxs)(`div`,{className:`p-4 md:p-8 relative`,...Gt,children:[Wt&&(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 bg-bambu-dark/90 flex items-center justify-center pointer-events-none`,children:(0,G.jsxs)(`div`,{className:`border-4 border-dashed border-bambu-green rounded-xl p-12 text-center`,children:[(0,G.jsx)(Bu,{className:`w-16 h-16 mx-auto mb-4 text-bambu-green`}),(0,G.jsx)(`p`,{className:`text-2xl font-semibold text-white mb-2`,children:e(`archives.page.dropFilesHere`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`archives.releaseToUpload`)})]})}),It&&(0,G.jsxs)(`div`,{className:`fixed bottom-6 left-1/2 -translate-x-1/2 z-40 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl px-4 py-3 flex items-center gap-4`,children:[(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:zt,children:[(0,G.jsx)(td,{className:`w-4 h-4`}),`Close`]}),(0,G.jsx)(`div`,{className:`w-px h-6 bg-bambu-dark-tertiary`}),(0,G.jsxs)(`span`,{className:`text-white font-medium`,children:[j.size,` selected`]}),(0,G.jsx)(`div`,{className:`w-px h-6 bg-bambu-dark-tertiary`}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:Rt,children:`Select All`}),(0,G.jsx)(`div`,{className:`w-px h-6 bg-bambu-dark-tertiary`}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>ne(!0),disabled:!i(`archives:update_own`,`archives:update_all`),title:i(`archives:update_own`,`archives:update_all`)?void 0:e(`archives.permission.noUpdateArchives`),children:[(0,G.jsx)(Tu,{className:`w-4 h-4`}),`Tags`]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>ie(!0),disabled:!i(`archives:update_own`,`archives:update_all`),title:i(`archives:update_own`,`archives:update_all`)?void 0:e(`archives.permission.noUpdateArchives`),children:[(0,G.jsx)(gc,{className:`w-4 h-4`}),`Project`]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,disabled:!i(`archives:update_own`,`archives:update_all`),title:i(`archives:update_own`,`archives:update_all`)?void 0:e(`archives.permission.noUpdateArchives`),onClick:()=>{let r=Array.from(j);Promise.all(r.map(e=>Z.toggleFavorite(e))).then(()=>{t.invalidateQueries({queryKey:[`archives`]}),n(`Toggled favorites for ${r.length} archive${r.length===1?``:`s`}`)}).catch(()=>{n(e(`archives.toast.failedUpdateFavorites`),`error`)})},children:[(0,G.jsx)(bu,{className:`w-4 h-4`}),`Favorite`]}),(0,G.jsxs)(Q,{size:`sm`,className:`bg-red-500 hover:bg-red-600`,onClick:()=>ee(!0),disabled:!i(`archives:delete_own`,`archives:delete_all`),title:i(`archives:delete_own`,`archives:delete_all`)?void 0:e(`archives.permission.noDelete`),children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),`Delete`]})]}),F?.has_fallback&&!N&&(0,G.jsxs)(`div`,{className:`mb-6 rounded-lg border border-amber-300 dark:border-amber-500/30 bg-amber-50 dark:bg-amber-500/10 px-4 py-3 flex items-start gap-3`,children:[(0,G.jsx)(ys,{className:`w-5 h-5 text-amber-600 dark:text-amber-400 flex-shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-sm font-medium text-amber-900 dark:text-amber-200`,children:e(`archives.no3mfBanner.title${L}`)}),(0,G.jsxs)(`div`,{className:`text-xs text-amber-800/90 dark:text-amber-200/80 mt-1`,children:[e(`archives.no3mfBanner.body${L}`),R&&(0,G.jsxs)(G.Fragment,{children:[` `,(0,G.jsxs)(`a`,{href:R,target:`_blank`,rel:`noreferrer`,className:`underline hover:text-amber-900 dark:hover:text-amber-100 inline-flex items-center gap-1`,children:[e(F?.reason===`internal_storage`||F?.reason===`internal_history`||F?.reason===`ftps_cooloff`||F?.reason===`ftp_transfer_failed`?`archives.no3mfBanner.docsLinkInternalStorage`:`archives.no3mfBanner.docsLink`),(0,G.jsx)(nc,{className:`w-3 h-3`})]})]})]})]}),(0,G.jsx)(`button`,{onClick:I,className:`text-amber-800/70 dark:text-amber-200/60 hover:text-amber-900 dark:hover:text-amber-200 flex-shrink-0 p-1 -m-1`,title:e(`archives.no3mfBanner.dismissLabel`),"aria-label":e(`archives.no3mfBanner.dismissLabel`),children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}),(0,G.jsxs)(`div`,{className:`flex flex-col sm:flex-row sm:items-center sm:justify-between gap-4 mb-8`,children:[(0,G.jsx)(`div`,{children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(Po,{className:`w-7 h-7 text-bambu-green`}),`Archives`]}),(0,G.jsxs)(`p`,{className:`text-bambu-gray mt-1`,children:[At?.length||0,` of `,it?.length||0,` prints`]})]}),(0,G.jsx)(`select`,{className:`mt-0.5 px-3 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray-light text-sm focus:border-bambu-green focus:outline-none`,value:ce,onChange:e=>le(e.target.value),children:LBe.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.label},e.id))})]})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 sm:gap-3 flex-wrap`,children:[(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>he(!me),disabled:ge,children:[ge?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(uc,{className:`w-4 h-4`}),`Export`]}),me&&(0,G.jsxs)(`div`,{className:`absolute right-0 top-full mt-1 w-48 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl z-20`,children:[(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-white hover:bg-bambu-dark-tertiary transition-colors flex items-center gap-2 rounded-t-lg`,onClick:async()=>{he(!1),_e(!0);try{let{blob:t,filename:r}=await Z.exportArchives({format:`csv`,printerId:c||void 0,status:ce===`failed`?`failed`:void 0,search:o||void 0}),i=URL.createObjectURL(t),a=document.createElement(`a`);a.href=i,a.download=r,a.click(),URL.revokeObjectURL(i),n(e(`archives.toast.exportDownloaded`))}catch{n(e(`archives.toast.exportFailed`),`error`)}finally{_e(!1)}},children:[(0,G.jsx)(dc,{className:`w-4 h-4`}),`Export as CSV`]}),(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-white hover:bg-bambu-dark-tertiary transition-colors flex items-center gap-2 rounded-b-lg`,onClick:async()=>{he(!1),_e(!0);try{let{blob:t,filename:r}=await Z.exportArchives({format:`xlsx`,printerId:c||void 0,status:ce===`failed`?`failed`:void 0,search:o||void 0}),i=URL.createObjectURL(t),a=document.createElement(`a`);a.href=i,a.download=r,a.click(),URL.revokeObjectURL(i),n(e(`archives.toast.exportDownloaded`))}catch{n(e(`archives.toast.exportFailed`),`error`)}finally{_e(!1)}},children:[(0,G.jsx)(uc,{className:`w-4 h-4`}),`Export as Excel`]})]})]}),j.size>=2&&j.size<=5&&(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>ye(!0),children:[(0,G.jsx)(Dc,{className:`w-4 h-4`}),`Compare (`,j.size,`)`]}),!It&&(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>B(!0),children:[(0,G.jsx)(_u,{className:`w-4 h-4`}),`Select`]}),(0,G.jsxs)(Q,{onClick:()=>O(!0),disabled:!r(`archives:create`),title:r(`archives:create`)?void 0:e(`archives.permission.noCreate`),children:[(0,G.jsx)(Bu,{className:`w-4 h-4`}),`Upload 3MF`]}),r(`archives:purge`)&&(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>Ce(!0),title:e(`archivePurge.headerTooltip`),children:[(0,G.jsx)(Nu,{className:`w-4 h-4 mr-2`}),e(`archivePurge.headerButton`)]})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center border border-bambu-dark-tertiary rounded-lg overflow-hidden flex-shrink-0 w-fit mb-4`,children:[(0,G.jsx)(`button`,{className:`p-2 ${ae===`grid`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,onClick:()=>oe(`grid`),title:e(`archives.gridView`),children:(0,G.jsx)(Jc,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{className:`p-2 ${ae===`list`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,onClick:()=>oe(`list`),title:e(`archives.listView`),children:(0,G.jsx)($c,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{className:`p-2 ${ae===`calendar`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,onClick:()=>oe(`calendar`),title:e(`archives.calendarView`),children:(0,G.jsx)(is,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{className:`p-2 ${ae===`log`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,onClick:()=>oe(`log`),title:e(`archives.logView`),children:(0,G.jsx)(ks,{className:`w-4 h-4`})})]}),ae!==`log`&&(0,G.jsx)(Ld,{className:`mb-6`,children:(0,G.jsxs)(zd,{className:`py-4`,children:[(0,G.jsxs)(`div`,{className:`flex flex-col md:flex-row gap-3 md:gap-4 md:items-center md:flex-wrap`,children:[(0,G.jsxs)(`div`,{className:`w-full md:flex-1 relative md:min-w-[200px]`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{ref:a,type:`text`,placeholder:e(`archives.searchPlaceholder`),className:`w-full pl-10 pr-4 py-3 md:py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:o,onChange:e=>s(e.target.value)})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 md:gap-4 overflow-x-auto pb-1 md:pb-0 -mx-4 px-4 md:mx-0 md:px-0 md:flex-wrap scrollbar-hide`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-shrink-0`,children:[(0,G.jsx)(Cc,{className:`w-4 h-4 text-bambu-gray hidden md:block`}),(0,G.jsxs)(`select`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:c||``,onChange:e=>l(e.target.value?Number(e.target.value):null),children:[(0,G.jsx)(`option`,{value:``,children:`All Printers`}),ot?.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-shrink-0`,children:[(0,G.jsx)(Sl,{className:`w-4 h-4 text-bambu-gray hidden md:block`}),(0,G.jsxs)(`select`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:u||``,onChange:e=>d(e.target.value||null),children:[(0,G.jsx)(`option`,{value:``,children:`All Materials`}),Dt.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-shrink-0`,children:[(0,G.jsx)(sc,{className:`w-4 h-4 text-bambu-gray hidden md:block`}),(0,G.jsxs)(`select`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:T,onChange:e=>E(e.target.value),children:[(0,G.jsx)(`option`,{value:`all`,children:`All Files`}),(0,G.jsx)(`option`,{value:`gcode`,children:`Sliced (GCODE)`}),(0,G.jsx)(`option`,{value:`source`,children:`Source Only`})]})]}),(0,G.jsxs)(`button`,{onClick:()=>_(!g),className:`flex items-center gap-2 px-3 py-2 rounded-lg border transition-colors flex-shrink-0 ${g?`bg-yellow-100 dark:bg-yellow-500/20 border-yellow-500 text-yellow-700 dark:text-yellow-400`:`bg-bambu-dark border-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,title:e(g?`archives.showAll`:`archives.showFavoritesOnly`),children:[(0,G.jsx)(bu,{className:`w-4 h-4 ${g?`fill-yellow-400`:``}`}),(0,G.jsx)(`span`,{className:`text-sm hidden md:inline`,children:`Favorites`})]}),(0,G.jsxs)(`button`,{onClick:()=>b(!v),className:`flex items-center gap-2 px-3 py-2 rounded-lg border transition-colors flex-shrink-0 ${v?`bg-red-100 dark:bg-red-500/20 border-red-500 text-red-700 dark:text-red-400`:`bg-bambu-dark border-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,title:e(v?`archives.showFailedPrints`:`archives.hideFailedPrints`),children:[(0,G.jsx)(ys,{className:`w-4 h-4 `}),(0,G.jsx)(`span`,{className:`text-sm hidden md:inline`,children:`Hide Failed`})]}),(0,G.jsxs)(`button`,{onClick:()=>S(!x),className:`flex items-center gap-2 px-3 py-2 rounded-lg border transition-colors flex-shrink-0 ${x?`bg-purple-100 dark:bg-purple-500/20 border-purple-500 text-purple-700 dark:text-purple-400`:`bg-bambu-dark border-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,title:e(`archives.hideDuplicates`),children:[(0,G.jsx)(Vs,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-sm hidden md:inline`,children:e(`archives.hideDuplicates`)})]}),kt.length>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-shrink-0`,children:[(0,G.jsx)(Tu,{className:`w-4 h-4 text-bambu-gray hidden md:block`}),(0,G.jsxs)(`select`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:C||``,onChange:e=>w(e.target.value||null),children:[(0,G.jsx)(`option`,{value:``,children:`All Tags`}),kt.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]}),(0,G.jsx)(`button`,{onClick:()=>xe(!0),className:`p-2 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary text-bambu-gray hover:text-white hover:border-bambu-green transition-colors`,title:e(`archives.manageTags`),children:(0,G.jsx)(nu,{className:`w-4 h-4`})})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-shrink-0`,children:[(0,G.jsx)(Bo,{className:`w-4 h-4 text-bambu-gray hidden md:block`}),(0,G.jsxs)(`select`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:se,onChange:e=>H(e.target.value),children:[(0,G.jsx)(`option`,{value:`date-desc`,children:e(`archives.sortNewest`)}),(0,G.jsx)(`option`,{value:`date-asc`,children:e(`archives.sortOldest`)}),(0,G.jsxs)(`option`,{value:`name-asc`,children:[e(`archives.sortName`),` A-Z`]}),(0,G.jsxs)(`option`,{value:`name-desc`,children:[e(`archives.sortName`),` Z-A`]}),(0,G.jsx)(`option`,{value:`size-desc`,children:e(`archives.sortLargest`)}),(0,G.jsx)(`option`,{value:`size-asc`,children:e(`archives.sortSmallest`)})]})]})]}),Ut&&(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:Ht,className:`text-bambu-gray hover:text-white`,children:[(0,G.jsx)(td,{className:`w-4 h-4`}),`Reset`]})]}),Ot.length>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mt-4 pt-4 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`Colors:`}),f.size>1&&(0,G.jsx)(`button`,{onClick:()=>h(e=>e===`or`?`and`:`or`),className:`px-2 py-0.5 text-xs rounded transition-colors ${m===`and`?`bg-bambu-green text-white`:`bg-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,title:m===`or`?`Match ANY selected color`:`Match ALL selected colors`,children:m.toUpperCase()}),(0,G.jsx)(`div`,{className:`flex items-center gap-1.5 flex-wrap`,children:Ot.map(e=>(0,G.jsx)(`button`,{onClick:()=>Bt(e),className:`w-6 h-6 rounded-full border-2 transition-all ${f.has(e)?`border-bambu-green scale-110`:`border-white/20 hover:border-white/40`}`,style:{backgroundColor:e},title:e},e))}),f.size>0&&(0,G.jsxs)(`button`,{onClick:Vt,className:`text-xs text-bambu-gray hover:text-white flex items-center gap-1`,children:[(0,G.jsx)(td,{className:`w-3 h-3`}),`Clear`]})]})]})}),(0,G.jsx)(DBe,{}),at?(0,G.jsx)(`div`,{className:`text-center py-12 text-bambu-gray`,children:e(`archives.loadingArchives`)}):At?.length===0&&ae!==`log`?(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`text-center py-12`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(o?`archives.noArchivesSearch`:`archives.noArchivesYet`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-2`,children:`Archives are created automatically when prints complete`})]})}):ae===`calendar`?(0,G.jsx)(Ld,{className:`p-6`,children:(0,G.jsx)(AAe,{archives:At||[],onArchiveClick:e=>{s(``),oe(`grid`),Te(e.id)},highlightedArchiveId:we})}):ae===`grid`?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 lg:grid-cols-3 xl:grid-cols-4 gap-6`,children:Ft?.map(t=>(0,G.jsx)(PBe,{archive:t,printerName:t.printer_id?Et.get(t.printer_id)||`Unknown`:t.sliced_for_model||`No Printer`,printerMap:Et,isSelected:j.has(t.id),onSelect:Lt,selectionMode:It,projects:st,isHighlighted:t.id===we,timeFormat:ft,preferredSlicer:pt,useSlicerApi:mt,currency:ht,t:e,onNavigateToArchive:rt},t.id))}),(0,G.jsx)(i3,{pageIndex:ue,pageSize:fe,totalRows:jt,totalPages:Pt,onPageChange:de,onPageSizeChange:e=>{pe(e),de(0)},t:e})]}):ae===`list`?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ld,{children:(0,G.jsxs)(`div`,{className:`divide-y divide-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-12 gap-4 px-4 py-3 text-xs text-bambu-gray font-medium`,children:[(0,G.jsx)(`div`,{className:`col-span-1`}),(0,G.jsx)(`div`,{className:`col-span-4`,children:`Name`}),(0,G.jsx)(`div`,{className:`col-span-2`,children:`Printer`}),(0,G.jsx)(`div`,{className:`col-span-2`,children:`Date`}),(0,G.jsx)(`div`,{className:`col-span-1`,children:`Size`}),(0,G.jsx)(`div`,{className:`col-span-2 text-right`,children:`Actions`})]}),Ft?.map(t=>(0,G.jsx)(FBe,{archive:t,printerName:t.printer_id?Et.get(t.printer_id)||`Unknown`:t.sliced_for_model||`No Printer`,isSelected:j.has(t.id),onSelect:Lt,selectionMode:It,projects:st,isHighlighted:t.id===we,preferredSlicer:pt,useSlicerApi:mt,t:e,onNavigateToArchive:rt},t.id))]})}),(0,G.jsx)(i3,{pageIndex:ue,pageSize:fe,totalRows:jt,totalPages:Pt,onPageChange:de,onPageSizeChange:e=>{pe(e),de(0)},t:e})]}):ae===`log`?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-3`,children:(0,G.jsxs)(`div`,{className:`flex flex-col md:flex-row gap-3 md:items-center md:flex-wrap`,children:[(0,G.jsxs)(`div`,{className:`flex-1 relative md:min-w-[200px]`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,placeholder:e(`archives.searchPlaceholder`),className:`w-full pl-10 pr-4 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,value:o,onChange:e=>{s(e.target.value),Le(0)}})]}),(0,G.jsxs)(`select`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,value:c||``,onChange:e=>{l(e.target.value?Number(e.target.value):null),Le(0)},children:[(0,G.jsx)(`option`,{value:``,children:e(`archives.log.allPrinters`)}),ot?.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]}),(0,G.jsxs)(`select`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,value:Oe||``,onChange:e=>{ke(e.target.value||null),Le(0)},children:[(0,G.jsx)(`option`,{value:``,children:e(`archives.log.allUsers`)}),lt?.map(e=>(0,G.jsx)(`option`,{value:e.username,children:e.username},e.id))]}),(0,G.jsxs)(`select`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,value:Ae||``,onChange:e=>{je(e.target.value||null),Le(0)},children:[(0,G.jsx)(`option`,{value:``,children:e(`archives.log.allStatuses`)}),(0,G.jsx)(`option`,{value:`completed`,children:e(`archives.status.completed`)}),(0,G.jsx)(`option`,{value:`failed`,children:e(`archives.status.failed`)}),(0,G.jsx)(`option`,{value:`stopped`,children:e(`archives.status.stopped`)}),(0,G.jsx)(`option`,{value:`cancelled`,children:e(`archives.log.cancelled`)}),(0,G.jsx)(`option`,{value:`skipped`,children:e(`archives.log.skipped`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`label`,{className:`text-sm text-bambu-gray`,children:e(`archives.log.dateFrom`)}),(0,G.jsx)(`input`,{type:`date`,className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,value:Me,onChange:e=>{Ne(e.target.value),Le(0)}})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`label`,{className:`text-sm text-bambu-gray`,children:e(`archives.log.dateTo`)}),(0,G.jsx)(`input`,{type:`date`,className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none text-sm`,value:Pe,onChange:e=>{Fe(e.target.value),Le(0)}})]}),(0,G.jsxs)(`div`,{className:`ml-auto flex items-center gap-2`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>$e(!0),className:`flex items-center gap-1.5 px-3 py-1.5 text-sm font-medium text-bambu-gray border border-bambu-dark-tertiary rounded-lg hover:bg-bambu-dark-tertiary transition-colors`,title:e(`inventory.configureColumns`),children:[(0,G.jsx)(zs,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`archives.log.columns`)})]}),(0,G.jsxs)(Q,{variant:`danger`,size:`sm`,onClick:()=>ze(!0),disabled:!r(`archives:delete_all`)||Ct.isPending,children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),e(`archives.log.clearLog`)]})]})]})})}),(0,G.jsx)(Ld,{children:dt?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-12`,children:(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin text-bambu-green`})}):ut?.items.length?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary text-bambu-gray text-left`,children:[nt.map(t=>{let n=t3.has(t),r=et.column===t,i=e(Q4[t]??t);return(0,G.jsx)(`th`,{scope:`col`,"aria-sort":r?et.direction===`asc`?`ascending`:`descending`:`none`,className:`px-4 py-3 font-medium ${bt.has(t)?`text-right`:``}`,children:n?(0,G.jsxs)(`button`,{type:`button`,onClick:()=>vt(t),className:`inline-flex items-center gap-1 font-medium transition-colors hover:text-bambu-green ${r?`text-bambu-green`:``}`,title:e(`archives.log.sortBy`,{column:i}),children:[i,r?et.direction===`asc`?(0,G.jsx)(gs,{className:`w-3.5 h-3.5`}):(0,G.jsx)(ps,{className:`w-3.5 h-3.5`}):(0,G.jsx)(Bo,{className:`w-3.5 h-3.5 opacity-30`})]}):i},t)}),(0,G.jsx)(`th`,{className:`px-4 py-3 font-medium w-10`,"aria-label":e(`common.actions`)})]})}),(0,G.jsx)(`tbody`,{className:`divide-y divide-bambu-dark-tertiary`,children:ut.items.map(t=>(0,G.jsxs)(`tr`,{className:`hover:bg-bambu-dark-secondary/50`,children:[nt.map(e=>(0,G.jsx)(`td`,{className:`px-4 py-3 ${bt.has(e)?`text-right`:``}`,children:xt(e,t)},e)),(0,G.jsx)(`td`,{className:`px-4 py-3 text-right`,children:(0,G.jsxs)(`div`,{className:`inline-flex items-center gap-2`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>{Ue(t),Ge(t.failure_reason||``),qe(t.status)},disabled:Tt.isPending||!(r(`archives:update_all`)||r(`archives:update_own`)),title:r(`archives:update_all`)||r(`archives:update_own`)?e(`archives.log.editEntryTitle`):e(`archives.permission.noEdit`),className:`text-bambu-gray hover:text-bambu-blue disabled:opacity-40 disabled:hover:text-bambu-gray transition-colors`,children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>Ve(t.id),disabled:wt.isPending||!(r(`archives:delete_all`)||r(`archives:delete_own`)),title:r(`archives:delete_all`)||r(`archives:delete_own`)?e(`archives.log.deleteEntryTitle`):e(`archives.permission.noDelete`),className:`text-bambu-gray hover:text-red-600 dark:hover:text-red-400 disabled:opacity-40 disabled:hover:text-bambu-gray transition-colors`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})})]},t.id))})]})}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-4 py-3 border-t border-bambu-dark-tertiary flex-wrap gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e(`archives.log.showing`,{count:Math.min(Ie+Je,ut.total),total:ut.total})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray`,children:e(`archives.log.rowsPerPage`)}),(0,G.jsxs)(`select`,{className:`px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-xs focus:border-bambu-green focus:outline-none`,value:Je,onChange:e=>{Ye(Number(e.target.value)),Le(0)},children:[(0,G.jsx)(`option`,{value:10,children:`10`}),(0,G.jsx)(`option`,{value:25,children:`25`}),(0,G.jsx)(`option`,{value:50,children:`50`}),(0,G.jsx)(`option`,{value:100,children:`100`})]})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[e(`archives.log.page`),` `,Math.floor(Ie/Je)+1,` / `,Math.max(1,Math.ceil(ut.total/Je))]}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>Le(Math.max(0,Ie-Je)),disabled:Ie===0,children:(0,G.jsx)(hs,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>Le(Ie+Je),disabled:Ie+Je>=ut.total,children:(0,G.jsx)(ms,{className:`w-4 h-4`})})]})]})]}):(0,G.jsx)(`div`,{className:`text-center py-12 text-bambu-gray`,children:e(`archives.log.noEntries`)})})]}):null,D&&(0,G.jsx)(vAe,{onClose:()=>{O(!1),A([])},initialFiles:k}),Se&&(0,G.jsx)(bAe,{onClose:()=>Ce(!1)}),V&&(0,G.jsx)(rf,{title:e(`archives.modal.deleteArchives`),message:e(`archives.modal.deleteArchivesConfirm`,{count:j.size}),confirmText:e(`archives.modal.deleteCount`,{count:j.size}),variant:`danger`,onConfirm:()=>{St.mutate(Array.from(j)),ee(!1)},onCancel:()=>ee(!1)}),te&&(0,G.jsx)(wAe,{selectedIds:Array.from(j),existingTags:kt,onClose:()=>ne(!1)}),re&&(0,G.jsx)(TAe,{selectedIds:Array.from(j),onClose:()=>ie(!1)}),ve&&j.size>=2&&j.size<=5&&(0,G.jsx)(CBe,{archiveIds:Array.from(j),onClose:()=>{ye(!1),M(new Set),B(!1)}}),be&&(0,G.jsx)(OBe,{onClose:()=>xe(!1)}),(0,G.jsx)(lK,{isOpen:Qe,onClose:()=>$e(!1),columns:gt,defaultColumns:_t,onSave:yt}),Re&&(0,G.jsx)(rf,{title:e(`archives.log.clearLogTitle`),message:e(`archives.log.clearLogConfirm`),confirmText:e(`archives.log.clearLogButton`),variant:`danger`,onConfirm:()=>{Ct.mutate(),ze(!1)},onCancel:()=>ze(!1)}),Be!==null&&(0,G.jsx)(rf,{title:e(`archives.log.deleteEntryTitle`),message:e(`archives.log.deleteEntryConfirm`),confirmText:e(`common.delete`),variant:`danger`,onConfirm:()=>{wt.mutate(Be),Ve(null)},onCancel:()=>Ve(null)}),He!==null&&(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/60 backdrop-blur-sm`,onClick:()=>Ue(null),children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg w-full max-w-md mx-4 p-6`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white mb-4`,children:e(`archives.log.editEntryTitle`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-4`,children:e(`archives.log.editEntryDescription`)}),(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:e(`editArchive.status`)}),(0,G.jsxs)(`select`,{value:Ke,onChange:e=>qe(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`completed`,children:e(`archives.log.statuses.completed`,{defaultValue:`completed`})}),(0,G.jsx)(`option`,{value:`failed`,children:e(`archives.log.statuses.failed`,{defaultValue:`failed`})}),(0,G.jsx)(`option`,{value:`stopped`,children:e(`archives.log.statuses.stopped`,{defaultValue:`stopped`})}),(0,G.jsx)(`option`,{value:`cancelled`,children:e(`archives.log.statuses.cancelled`,{defaultValue:`cancelled`})}),(0,G.jsx)(`option`,{value:`skipped`,children:e(`archives.log.statuses.skipped`,{defaultValue:`skipped`})})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:e(`editArchive.failureReason`)}),(0,G.jsxs)(`select`,{value:We,onChange:e=>Ge(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:``,children:e(`editArchive.selectReason`)}),aK.map(t=>(0,G.jsx)(`option`,{value:t,children:e(`editArchive.failureReasons.${t}`)},t))]})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 mt-6`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>Ue(null),children:e(`common.cancel`)}),(0,G.jsx)(Q,{variant:`primary`,onClick:()=>{let e={};if(We!==(He.failure_reason||``)&&(e.failure_reason=We||null),Ke!==He.status&&(e.status=Ke),Object.keys(e).length===0){Ue(null);return}Tt.mutate({id:He.id,body:e})},disabled:Tt.isPending,children:Tt.isPending?e(`editArchive.saving`):e(`common.save`)})]})]})})]})}function i3({pageIndex:e,pageSize:t,totalRows:n,totalPages:r,onPageChange:i,onPageSizeChange:a,t:o}){let s=t===-1;if(r<=1&&!s)return null;let c=s?n||1:t;return(0,G.jsxs)(`div`,{className:`flex items-center justify-between pt-2 text-sm`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:s?`${n} ${o(`archives.prints`)}`:(0,G.jsxs)(G.Fragment,{children:[o(`archives.pagination.showing`),` `,e*c+1,` `,o(`archives.pagination.to`),` `,Math.min((e+1)*c,n),` `,o(`archives.pagination.of`),` `,n,` `,o(`archives.prints`)]})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:o(`archives.pagination.show`)}),(0,G.jsxs)(`select`,{value:t,onChange:e=>a(Number(e.target.value)),className:`px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:outline-none focus:border-bambu-green`,children:[[25,50,100,200].map(e=>(0,G.jsx)(`option`,{value:e,children:e},e)),(0,G.jsx)(`option`,{value:-1,children:o(`archives.pagination.all`)})]}),!s&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`button`,{onClick:()=>i(0),disabled:e===0,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,children:(0,G.jsx)(_s,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>i(Math.max(0,e-1)),disabled:e===0,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,children:(0,G.jsx)(hs,{className:`w-4 h-4`})}),(0,G.jsxs)(`span`,{className:`text-bambu-gray px-2 whitespace-nowrap`,children:[o(`archives.pagination.page`),` `,e+1,` `,o(`archives.pagination.of`),` `,r]}),(0,G.jsx)(`button`,{onClick:()=>i(Math.min(r-1,e+1)),disabled:e>=r-1,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,children:(0,G.jsx)(ms,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>i(r-1),disabled:e>=r-1,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,children:(0,G.jsx)(vs,{className:`w-4 h-4`})})]})]})]})}function zBe(){var e=[...arguments];return(0,y.useMemo)(()=>t=>{e.forEach(e=>e(t))},e)}var a3=typeof window<`u`&&window.document!==void 0&&window.document.createElement!==void 0;function o3(e){let t=Object.prototype.toString.call(e);return t===`[object Window]`||t===`[object global]`}function s3(e){return`nodeType`in e}function c3(e){return e?o3(e)?e:s3(e)?e.ownerDocument?.defaultView??window:window:window}function l3(e){let{Document:t}=c3(e);return e instanceof t}function u3(e){return o3(e)?!1:e instanceof c3(e).HTMLElement}function d3(e){return e instanceof c3(e).SVGElement}function f3(e){return e?o3(e)?e.document:s3(e)?l3(e)?e:u3(e)||d3(e)?e.ownerDocument:document:document:document}var p3=a3?y.useLayoutEffect:y.useEffect;function m3(e){let t=(0,y.useRef)(e);return p3(()=>{t.current=e}),(0,y.useCallback)(function(){var e=[...arguments];return t.current==null?void 0:t.current(...e)},[])}function BBe(){let e=(0,y.useRef)(null);return[(0,y.useCallback)((t,n)=>{e.current=setInterval(t,n)},[]),(0,y.useCallback)(()=>{e.current!==null&&(clearInterval(e.current),e.current=null)},[])]}function h3(e,t){t===void 0&&(t=[e]);let n=(0,y.useRef)(e);return p3(()=>{n.current!==e&&(n.current=e)},t),n}function g3(e,t){let n=(0,y.useRef)();return(0,y.useMemo)(()=>{let t=e(n.current);return n.current=t,t},[...t])}function _3(e){let t=m3(e),n=(0,y.useRef)(null);return[n,(0,y.useCallback)(e=>{e!==n.current&&t?.(e,n.current),n.current=e},[])]}function v3(e){let t=(0,y.useRef)();return(0,y.useEffect)(()=>{t.current=e},[e]),t.current}var y3={};function b3(e,t){return(0,y.useMemo)(()=>{if(t)return t;let n=y3[e]==null?0:y3[e]+1;return y3[e]=n,e+`-`+n},[e,t])}function x3(e){return function(t){return[...arguments].slice(1).reduce((t,n)=>{let r=Object.entries(n);for(let[n,i]of r){let r=t[n];r!=null&&(t[n]=r+e*i)}return t},{...t})}}var S3=x3(1),C3=x3(-1);function VBe(e){return`clientX`in e&&`clientY`in e}function w3(e){if(!e)return!1;let{KeyboardEvent:t}=c3(e.target);return t&&e instanceof t}function HBe(e){if(!e)return!1;let{TouchEvent:t}=c3(e.target);return t&&e instanceof t}function T3(e){if(HBe(e)){if(e.touches&&e.touches.length){let{clientX:t,clientY:n}=e.touches[0];return{x:t,y:n}}else if(e.changedTouches&&e.changedTouches.length){let{clientX:t,clientY:n}=e.changedTouches[0];return{x:t,y:n}}}return VBe(e)?{x:e.clientX,y:e.clientY}:null}var E3=Object.freeze({Translate:{toString(e){if(!e)return;let{x:t,y:n}=e;return`translate3d(`+(t?Math.round(t):0)+`px, `+(n?Math.round(n):0)+`px, 0)`}},Scale:{toString(e){if(!e)return;let{scaleX:t,scaleY:n}=e;return`scaleX(`+t+`) scaleY(`+n+`)`}},Transform:{toString(e){if(e)return[E3.Translate.toString(e),E3.Scale.toString(e)].join(` `)}},Transition:{toString(e){let{property:t,duration:n,easing:r}=e;return t+` `+n+`ms `+r}}}),D3=`a,frame,iframe,input:not([type=hidden]):not(:disabled),select:not(:disabled),textarea:not(:disabled),button:not(:disabled),*[tabindex]`;function UBe(e){return e.matches(D3)?e:e.querySelector(D3)}var WBe={display:`none`};function GBe(e){let{id:t,value:n}=e;return y.createElement(`div`,{id:t,style:WBe},n)}function KBe(e){let{id:t,announcement:n,ariaLiveType:r=`assertive`}=e;return y.createElement(`div`,{id:t,style:{position:`fixed`,top:0,left:0,width:1,height:1,margin:-1,border:0,padding:0,overflow:`hidden`,clip:`rect(0 0 0 0)`,clipPath:`inset(100%)`,whiteSpace:`nowrap`},role:`status`,"aria-live":r,"aria-atomic":!0},n)}function qBe(){let[e,t]=(0,y.useState)(``);return{announce:(0,y.useCallback)(e=>{e!=null&&t(e)},[]),announcement:e}}var O3=(0,y.createContext)(null);function JBe(e){let t=(0,y.useContext)(O3);(0,y.useEffect)(()=>{if(!t)throw Error(`useDndMonitor must be used within a children of <DndContext>`);return t(e)},[e,t])}function YBe(){let[e]=(0,y.useState)(()=>new Set),t=(0,y.useCallback)(t=>(e.add(t),()=>e.delete(t)),[e]);return[(0,y.useCallback)(t=>{let{type:n,event:r}=t;e.forEach(e=>e[n]?.call(e,r))},[e]),t]}var XBe={draggable:`
     To pick up a draggable item, press the space bar.
     While dragging, use the arrow keys to move the item.
     Press space again to drop the item in its new position, or press escape to cancel.
-  `},XBe={onDragStart(e){let{active:t}=e;return`Picked up draggable item `+t.id+`.`},onDragOver(e){let{active:t,over:n}=e;return n?`Draggable item `+t.id+` was moved over droppable area `+n.id+`.`:`Draggable item `+t.id+` is no longer over a droppable area.`},onDragEnd(e){let{active:t,over:n}=e;return n?`Draggable item `+t.id+` was dropped over droppable area `+n.id:`Draggable item `+t.id+` was dropped.`},onDragCancel(e){let{active:t}=e;return`Dragging was cancelled. Draggable item `+t.id+` was dropped.`}};function ZBe(e){let{announcements:t=XBe,container:n,hiddenTextDescribedById:r,screenReaderInstructions:i=YBe}=e,{announce:a,announcement:o}=KBe(),s=_3(`DndLiveRegion`),[c,l]=(0,y.useState)(!1);if((0,y.useEffect)(()=>{l(!0)},[]),qBe((0,y.useMemo)(()=>({onDragStart(e){let{active:n}=e;a(t.onDragStart({active:n}))},onDragMove(e){let{active:n,over:r}=e;t.onDragMove&&a(t.onDragMove({active:n,over:r}))},onDragOver(e){let{active:n,over:r}=e;a(t.onDragOver({active:n,over:r}))},onDragEnd(e){let{active:n,over:r}=e;a(t.onDragEnd({active:n,over:r}))},onDragCancel(e){let{active:n,over:r}=e;a(t.onDragCancel({active:n,over:r}))}}),[a,t])),!c)return null;let u=y.createElement(y.Fragment,null,y.createElement(WBe,{id:r,value:i.draggable}),y.createElement(GBe,{id:s,announcement:o}));return n?(0,At.createPortal)(u,n):u}var E3;(function(e){e.DragStart=`dragStart`,e.DragMove=`dragMove`,e.DragEnd=`dragEnd`,e.DragCancel=`dragCancel`,e.DragOver=`dragOver`,e.RegisterDroppable=`registerDroppable`,e.SetDroppableDisabled=`setDroppableDisabled`,e.UnregisterDroppable=`unregisterDroppable`})(E3||={});function D3(){}function O3(e,t){return(0,y.useMemo)(()=>({sensor:e,options:t??{}}),[e,t])}function k3(){var e=[...arguments];return(0,y.useMemo)(()=>[...e].filter(e=>e!=null),[...e])}var A3=Object.freeze({x:0,y:0});function j3(e,t){return Math.sqrt((e.x-t.x)**2+(e.y-t.y)**2)}function QBe(e,t){let n=S3(e);if(!n)return`0 0`;let r={x:(n.x-t.left)/t.width*100,y:(n.y-t.top)/t.height*100};return r.x+`% `+r.y+`%`}function M3(e,t){let{data:{value:n}}=e,{data:{value:r}}=t;return n-r}function $Be(e,t){let{data:{value:n}}=e,{data:{value:r}}=t;return r-n}function N3(e){let{left:t,top:n,height:r,width:i}=e;return[{x:t,y:n},{x:t+i,y:n},{x:t,y:n+r},{x:t+i,y:n+r}]}function P3(e,t){if(!e||e.length===0)return null;let[n]=e;return t?n[t]:n}function F3(e,t,n){return t===void 0&&(t=e.left),n===void 0&&(n=e.top),{x:t+e.width*.5,y:n+e.height*.5}}var I3=e=>{let{collisionRect:t,droppableRects:n,droppableContainers:r}=e,i=F3(t,t.left,t.top),a=[];for(let e of r){let{id:t}=e,r=n.get(t);if(r){let n=j3(F3(r),i);a.push({id:t,data:{droppableContainer:e,value:n}})}}return a.sort(M3)},eVe=e=>{let{collisionRect:t,droppableRects:n,droppableContainers:r}=e,i=N3(t),a=[];for(let e of r){let{id:t}=e,r=n.get(t);if(r){let n=N3(r),o=i.reduce((e,t,r)=>e+j3(n[r],t),0),s=Number((o/4).toFixed(4));a.push({id:t,data:{droppableContainer:e,value:s}})}}return a.sort(M3)};function tVe(e,t){let n=Math.max(t.top,e.top),r=Math.max(t.left,e.left),i=Math.min(t.left+t.width,e.left+e.width),a=Math.min(t.top+t.height,e.top+e.height),o=i-r,s=a-n;if(r<i&&n<a){let n=t.width*t.height,r=e.width*e.height,i=o*s,a=i/(n+r-i);return Number(a.toFixed(4))}return 0}var nVe=e=>{let{collisionRect:t,droppableRects:n,droppableContainers:r}=e,i=[];for(let e of r){let{id:r}=e,a=n.get(r);if(a){let n=tVe(a,t);n>0&&i.push({id:r,data:{droppableContainer:e,value:n}})}}return i.sort($Be)};function rVe(e,t,n){return{...e,scaleX:t&&n?t.width/n.width:1,scaleY:t&&n?t.height/n.height:1}}function L3(e,t){return e&&t?{x:e.left-t.left,y:e.top-t.top}:A3}function iVe(e){return function(t){return[...arguments].slice(1).reduce((t,n)=>({...t,top:t.top+e*n.y,bottom:t.bottom+e*n.y,left:t.left+e*n.x,right:t.right+e*n.x}),{...t})}}var aVe=iVe(1);function R3(e){if(e.startsWith(`matrix3d(`)){let t=e.slice(9,-1).split(/, /);return{x:+t[12],y:+t[13],scaleX:+t[0],scaleY:+t[5]}}else if(e.startsWith(`matrix(`)){let t=e.slice(7,-1).split(/, /);return{x:+t[4],y:+t[5],scaleX:+t[0],scaleY:+t[3]}}return null}function oVe(e,t,n){let r=R3(t);if(!r)return e;let{scaleX:i,scaleY:a,x:o,y:s}=r,c=e.left-o-(1-i)*parseFloat(n),l=e.top-s-(1-a)*parseFloat(n.slice(n.indexOf(` `)+1)),u=i?e.width/i:e.width,d=a?e.height/a:e.height;return{width:u,height:d,top:l,right:c+u,bottom:l+d,left:c}}var sVe={ignoreTransform:!1};function z3(e,t){t===void 0&&(t=sVe);let n=e.getBoundingClientRect();if(t.ignoreTransform){let{transform:t,transformOrigin:r}=a3(e).getComputedStyle(e);t&&(n=oVe(n,t,r))}let{top:r,left:i,width:a,height:o,bottom:s,right:c}=n;return{top:r,left:i,width:a,height:o,bottom:s,right:c}}function B3(e){return z3(e,{ignoreTransform:!0})}function cVe(e){let t=e.innerWidth,n=e.innerHeight;return{top:0,left:0,right:t,bottom:n,width:t,height:n}}function lVe(e,t){return t===void 0&&(t=a3(e).getComputedStyle(e)),t.position===`fixed`}function uVe(e,t){t===void 0&&(t=a3(e).getComputedStyle(e));let n=/(auto|scroll|overlay)/;return[`overflow`,`overflowX`,`overflowY`].some(e=>{let r=t[e];return typeof r==`string`?n.test(r):!1})}function V3(e,t){let n=[];function r(i){if(t!=null&&n.length>=t||!i)return n;if(o3(i)&&i.scrollingElement!=null&&!n.includes(i.scrollingElement))return n.push(i.scrollingElement),n;if(!s3(i)||c3(i)||n.includes(i))return n;let a=a3(e).getComputedStyle(i);return i!==e&&uVe(i,a)&&n.push(i),lVe(i,a)?n:r(i.parentNode)}return e?r(e):n}function H3(e){let[t]=V3(e,1);return t??null}function U3(e){return!n3||!e?null:r3(e)?e:i3(e)?o3(e)||e===l3(e).scrollingElement?window:s3(e)?e:null:null}function W3(e){return r3(e)?e.scrollX:e.scrollLeft}function G3(e){return r3(e)?e.scrollY:e.scrollTop}function K3(e){return{x:W3(e),y:G3(e)}}var q3;(function(e){e[e.Forward=1]=`Forward`,e[e.Backward=-1]=`Backward`})(q3||={});function J3(e){return!n3||!e?!1:e===document.scrollingElement}function Y3(e){let t={x:0,y:0},n=J3(e)?{height:window.innerHeight,width:window.innerWidth}:{height:e.clientHeight,width:e.clientWidth},r={x:e.scrollWidth-n.width,y:e.scrollHeight-n.height};return{isTop:e.scrollTop<=t.y,isLeft:e.scrollLeft<=t.x,isBottom:e.scrollTop>=r.y,isRight:e.scrollLeft>=r.x,maxScroll:r,minScroll:t}}var dVe={x:.2,y:.2};function fVe(e,t,n,r,i){let{top:a,left:o,right:s,bottom:c}=n;r===void 0&&(r=10),i===void 0&&(i=dVe);let{isTop:l,isBottom:u,isLeft:d,isRight:f}=Y3(e),p={x:0,y:0},m={x:0,y:0},h={height:t.height*i.y,width:t.width*i.x};return!l&&a<=t.top+h.height?(p.y=q3.Backward,m.y=r*Math.abs((t.top+h.height-a)/h.height)):!u&&c>=t.bottom-h.height&&(p.y=q3.Forward,m.y=r*Math.abs((t.bottom-h.height-c)/h.height)),!f&&s>=t.right-h.width?(p.x=q3.Forward,m.x=r*Math.abs((t.right-h.width-s)/h.width)):!d&&o<=t.left+h.width&&(p.x=q3.Backward,m.x=r*Math.abs((t.left+h.width-o)/h.width)),{direction:p,speed:m}}function pVe(e){if(e===document.scrollingElement){let{innerWidth:e,innerHeight:t}=window;return{top:0,left:0,right:e,bottom:t,width:e,height:t}}let{top:t,left:n,right:r,bottom:i}=e.getBoundingClientRect();return{top:t,left:n,right:r,bottom:i,width:e.clientWidth,height:e.clientHeight}}function X3(e){return e.reduce((e,t)=>y3(e,K3(t)),A3)}function mVe(e){return e.reduce((e,t)=>e+W3(t),0)}function hVe(e){return e.reduce((e,t)=>e+G3(t),0)}function Z3(e,t){if(t===void 0&&(t=z3),!e)return;let{top:n,left:r,bottom:i,right:a}=t(e);H3(e)&&(i<=0||a<=0||n>=window.innerHeight||r>=window.innerWidth)&&e.scrollIntoView({block:`center`,inline:`center`})}var gVe=[[`x`,[`left`,`right`],mVe],[`y`,[`top`,`bottom`],hVe]],Q3=class{constructor(e,t){this.rect=void 0,this.width=void 0,this.height=void 0,this.top=void 0,this.bottom=void 0,this.right=void 0,this.left=void 0;let n=V3(t),r=X3(n);this.rect={...e},this.width=e.width,this.height=e.height;for(let[e,t,i]of gVe)for(let a of t)Object.defineProperty(this,a,{get:()=>{let t=i(n),o=r[e]-t;return this.rect[a]+o},enumerable:!0});Object.defineProperty(this,"rect",{enumerable:!1})}},$3=class{constructor(e){this.target=void 0,this.listeners=[],this.removeAll=()=>{this.listeners.forEach(e=>this.target?.removeEventListener(...e))},this.target=e}add(e,t,n){var r;(r=this.target)==null||r.addEventListener(e,t,n),this.listeners.push([e,t,n])}};function _Ve(e){let{EventTarget:t}=a3(e);return e instanceof t?e:l3(e)}function e6(e,t){let n=Math.abs(e.x),r=Math.abs(e.y);return typeof t==`number`?Math.sqrt(n**2+r**2)>t:`x`in t&&`y`in t?n>t.x&&r>t.y:`x`in t?n>t.x:`y`in t?r>t.y:!1}var t6;(function(e){e.Click=`click`,e.DragStart=`dragstart`,e.Keydown=`keydown`,e.ContextMenu=`contextmenu`,e.Resize=`resize`,e.SelectionChange=`selectionchange`,e.VisibilityChange=`visibilitychange`})(t6||={});function n6(e){e.preventDefault()}function vVe(e){e.stopPropagation()}var r6;(function(e){e.Space=`Space`,e.Down=`ArrowDown`,e.Right=`ArrowRight`,e.Left=`ArrowLeft`,e.Up=`ArrowUp`,e.Esc=`Escape`,e.Enter=`Enter`,e.Tab=`Tab`})(r6||={});var i6={start:[r6.Space,r6.Enter],cancel:[r6.Esc],end:[r6.Space,r6.Enter,r6.Tab]},yVe=(e,t)=>{let{currentCoordinates:n}=t;switch(e.code){case r6.Right:return{...n,x:n.x+25};case r6.Left:return{...n,x:n.x-25};case r6.Down:return{...n,y:n.y+25};case r6.Up:return{...n,y:n.y-25}}},a6=class{constructor(e){this.props=void 0,this.autoScrollEnabled=!1,this.referenceCoordinates=void 0,this.listeners=void 0,this.windowListeners=void 0,this.props=e;let{event:{target:t}}=e;this.props=e,this.listeners=new $3(l3(t)),this.windowListeners=new $3(a3(t)),this.handleKeyDown=this.handleKeyDown.bind(this),this.handleCancel=this.handleCancel.bind(this),this.attach()}attach(){this.handleStart(),this.windowListeners.add(t6.Resize,this.handleCancel),this.windowListeners.add(t6.VisibilityChange,this.handleCancel),setTimeout(()=>this.listeners.add(t6.Keydown,this.handleKeyDown))}handleStart(){let{activeNode:e,onStart:t}=this.props,n=e.node.current;n&&Z3(n),t(A3)}handleKeyDown(e){if(x3(e)){let{active:t,context:n,options:r}=this.props,{keyboardCodes:i=i6,coordinateGetter:a=yVe,scrollBehavior:o=`smooth`}=r,{code:s}=e;if(i.end.includes(s)){this.handleEnd(e);return}if(i.cancel.includes(s)){this.handleCancel(e);return}let{collisionRect:c}=n.current,l=c?{x:c.left,y:c.top}:A3;this.referenceCoordinates||=l;let u=a(e,{active:t,context:n.current,currentCoordinates:l});if(u){let t=b3(u,l),r={x:0,y:0},{scrollableAncestors:i}=n.current;for(let n of i){let i=e.code,{isTop:a,isRight:s,isLeft:c,isBottom:l,maxScroll:d,minScroll:f}=Y3(n),p=pVe(n),m={x:Math.min(i===r6.Right?p.right-p.width/2:p.right,Math.max(i===r6.Right?p.left:p.left+p.width/2,u.x)),y:Math.min(i===r6.Down?p.bottom-p.height/2:p.bottom,Math.max(i===r6.Down?p.top:p.top+p.height/2,u.y))},h=i===r6.Right&&!s||i===r6.Left&&!c,g=i===r6.Down&&!l||i===r6.Up&&!a;if(h&&m.x!==u.x){let e=n.scrollLeft+t.x,a=i===r6.Right&&e<=d.x||i===r6.Left&&e>=f.x;if(a&&!t.y){n.scrollTo({left:e,behavior:o});return}a?r.x=n.scrollLeft-e:r.x=i===r6.Right?n.scrollLeft-d.x:n.scrollLeft-f.x,r.x&&n.scrollBy({left:-r.x,behavior:o});break}else if(g&&m.y!==u.y){let e=n.scrollTop+t.y,a=i===r6.Down&&e<=d.y||i===r6.Up&&e>=f.y;if(a&&!t.x){n.scrollTo({top:e,behavior:o});return}a?r.y=n.scrollTop-e:r.y=i===r6.Down?n.scrollTop-d.y:n.scrollTop-f.y,r.y&&n.scrollBy({top:-r.y,behavior:o});break}}this.handleMove(e,y3(b3(u,this.referenceCoordinates),r))}}}handleMove(e,t){let{onMove:n}=this.props;e.preventDefault(),n(t)}handleEnd(e){let{onEnd:t}=this.props;e.preventDefault(),this.detach(),t()}handleCancel(e){let{onCancel:t}=this.props;e.preventDefault(),this.detach(),t()}detach(){this.listeners.removeAll(),this.windowListeners.removeAll()}};a6.activators=[{eventName:`onKeyDown`,handler:(e,t,n)=>{let{keyboardCodes:r=i6,onActivation:i}=t,{active:a}=n,{code:o}=e.nativeEvent;if(r.start.includes(o)){let t=a.activatorNode.current;return t&&e.target!==t?!1:(e.preventDefault(),i?.({event:e.nativeEvent}),!0)}return!1}}];function o6(e){return!!(e&&`distance`in e)}function s6(e){return!!(e&&`delay`in e)}var c6=class{constructor(e,t,n){n===void 0&&(n=_Ve(e.event.target)),this.props=void 0,this.events=void 0,this.autoScrollEnabled=!0,this.document=void 0,this.activated=!1,this.initialCoordinates=void 0,this.timeoutId=null,this.listeners=void 0,this.documentListeners=void 0,this.windowListeners=void 0,this.props=e,this.events=t;let{event:r}=e,{target:i}=r;this.props=e,this.events=t,this.document=l3(i),this.documentListeners=new $3(this.document),this.listeners=new $3(n),this.windowListeners=new $3(a3(i)),this.initialCoordinates=S3(r)??A3,this.handleStart=this.handleStart.bind(this),this.handleMove=this.handleMove.bind(this),this.handleEnd=this.handleEnd.bind(this),this.handleCancel=this.handleCancel.bind(this),this.handleKeydown=this.handleKeydown.bind(this),this.removeTextSelection=this.removeTextSelection.bind(this),this.attach()}attach(){let{events:e,props:{options:{activationConstraint:t,bypassActivationConstraint:n}}}=this;if(this.listeners.add(e.move.name,this.handleMove,{passive:!1}),this.listeners.add(e.end.name,this.handleEnd),e.cancel&&this.listeners.add(e.cancel.name,this.handleCancel),this.windowListeners.add(t6.Resize,this.handleCancel),this.windowListeners.add(t6.DragStart,n6),this.windowListeners.add(t6.VisibilityChange,this.handleCancel),this.windowListeners.add(t6.ContextMenu,n6),this.documentListeners.add(t6.Keydown,this.handleKeydown),t){if(n!=null&&n({event:this.props.event,activeNode:this.props.activeNode,options:this.props.options}))return this.handleStart();if(s6(t)){this.timeoutId=setTimeout(this.handleStart,t.delay),this.handlePending(t);return}if(o6(t)){this.handlePending(t);return}}this.handleStart()}detach(){this.listeners.removeAll(),this.windowListeners.removeAll(),setTimeout(this.documentListeners.removeAll,50),this.timeoutId!==null&&(clearTimeout(this.timeoutId),this.timeoutId=null)}handlePending(e,t){let{active:n,onPending:r}=this.props;r(n,e,this.initialCoordinates,t)}handleStart(){let{initialCoordinates:e}=this,{onStart:t}=this.props;e&&(this.activated=!0,this.documentListeners.add(t6.Click,vVe,{capture:!0}),this.removeTextSelection(),this.documentListeners.add(t6.SelectionChange,this.removeTextSelection),t(e))}handleMove(e){let{activated:t,initialCoordinates:n,props:r}=this,{onMove:i,options:{activationConstraint:a}}=r;if(!n)return;let o=S3(e)??A3,s=b3(n,o);if(!t&&a){if(o6(a)){if(a.tolerance!=null&&e6(s,a.tolerance))return this.handleCancel();if(e6(s,a.distance))return this.handleStart()}if(s6(a)&&e6(s,a.tolerance))return this.handleCancel();this.handlePending(a,s);return}e.cancelable&&e.preventDefault(),i(o)}handleEnd(){let{onAbort:e,onEnd:t}=this.props;this.detach(),this.activated||e(this.props.active),t()}handleCancel(){let{onAbort:e,onCancel:t}=this.props;this.detach(),this.activated||e(this.props.active),t()}handleKeydown(e){e.code===r6.Esc&&this.handleCancel()}removeTextSelection(){var e;(e=this.document.getSelection())==null||e.removeAllRanges()}},bVe={cancel:{name:`pointercancel`},move:{name:`pointermove`},end:{name:`pointerup`}},l6=class extends c6{constructor(e){let{event:t}=e,n=l3(t.target);super(e,bVe,n)}};l6.activators=[{eventName:`onPointerDown`,handler:(e,t)=>{let{nativeEvent:n}=e,{onActivation:r}=t;return!n.isPrimary||n.button!==0?!1:(r?.({event:n}),!0)}}];var xVe={move:{name:`mousemove`},end:{name:`mouseup`}},u6;(function(e){e[e.RightClick=2]=`RightClick`})(u6||={});var SVe=class extends c6{constructor(e){super(e,xVe,l3(e.event.target))}};SVe.activators=[{eventName:`onMouseDown`,handler:(e,t)=>{let{nativeEvent:n}=e,{onActivation:r}=t;return n.button===u6.RightClick?!1:(r?.({event:n}),!0)}}];var d6={cancel:{name:`touchcancel`},move:{name:`touchmove`},end:{name:`touchend`}},CVe=class extends c6{constructor(e){super(e,d6)}static setup(){return window.addEventListener(d6.move.name,e,{capture:!1,passive:!1}),function(){window.removeEventListener(d6.move.name,e)};function e(){}}};CVe.activators=[{eventName:`onTouchStart`,handler:(e,t)=>{let{nativeEvent:n}=e,{onActivation:r}=t,{touches:i}=n;return i.length>1?!1:(r?.({event:n}),!0)}}];var f6;(function(e){e[e.Pointer=0]=`Pointer`,e[e.DraggableRect=1]=`DraggableRect`})(f6||={});var p6;(function(e){e[e.TreeOrder=0]=`TreeOrder`,e[e.ReversedTreeOrder=1]=`ReversedTreeOrder`})(p6||={});function wVe(e){let{acceleration:t,activator:n=f6.Pointer,canScroll:r,draggingRect:i,enabled:a,interval:o=5,order:s=p6.TreeOrder,pointerCoordinates:c,scrollableAncestors:l,scrollableAncestorRects:u,delta:d,threshold:f}=e,p=EVe({delta:d,disabled:!a}),[m,h]=zBe(),g=(0,y.useRef)({x:0,y:0}),_=(0,y.useRef)({x:0,y:0}),v=(0,y.useMemo)(()=>{switch(n){case f6.Pointer:return c?{top:c.y,bottom:c.y,left:c.x,right:c.x}:null;case f6.DraggableRect:return i}},[n,i,c]),b=(0,y.useRef)(null),x=(0,y.useCallback)(()=>{let e=b.current;if(!e)return;let t=g.current.x*_.current.x,n=g.current.y*_.current.y;e.scrollBy(t,n)},[]),S=(0,y.useMemo)(()=>s===p6.TreeOrder?[...l].reverse():l,[s,l]);(0,y.useEffect)(()=>{if(!a||!l.length||!v){h();return}for(let e of S){if(r?.(e)===!1)continue;let n=u[l.indexOf(e)];if(!n)continue;let{direction:i,speed:a}=fVe(e,n,v,t,f);for(let e of[`x`,`y`])p[e][i[e]]||(a[e]=0,i[e]=0);if(a.x>0||a.y>0){h(),b.current=e,m(x,o),g.current=a,_.current=i;return}}g.current={x:0,y:0},_.current={x:0,y:0},h()},[t,x,r,h,a,o,JSON.stringify(v),JSON.stringify(p),m,l,S,u,JSON.stringify(f)])}var TVe={x:{[q3.Backward]:!1,[q3.Forward]:!1},y:{[q3.Backward]:!1,[q3.Forward]:!1}};function EVe(e){let{delta:t,disabled:n}=e,r=h3(t);return p3(e=>{if(n||!r||!e)return TVe;let i={x:Math.sign(t.x-r.x),y:Math.sign(t.y-r.y)};return{x:{[q3.Backward]:e.x[q3.Backward]||i.x===-1,[q3.Forward]:e.x[q3.Forward]||i.x===1},y:{[q3.Backward]:e.y[q3.Backward]||i.y===-1,[q3.Forward]:e.y[q3.Forward]||i.y===1}}},[n,t,r])}function DVe(e,t){let n=t==null?void 0:e.get(t),r=n?n.node.current:null;return p3(e=>t==null?null:r??e??null,[r,t])}function OVe(e,t){return(0,y.useMemo)(()=>e.reduce((e,n)=>{let{sensor:r}=n,i=r.activators.map(e=>({eventName:e.eventName,handler:t(e.handler,n)}));return[...e,...i]},[]),[e,t])}var m6;(function(e){e[e.Always=0]=`Always`,e[e.BeforeDragging=1]=`BeforeDragging`,e[e.WhileDragging=2]=`WhileDragging`})(m6||={});var h6;(function(e){e.Optimized=`optimized`})(h6||={});var g6=new Map;function kVe(e,t){let{dragging:n,dependencies:r,config:i}=t,[a,o]=(0,y.useState)(null),{frequency:s,measure:c,strategy:l}=i,u=(0,y.useRef)(e),d=g(),f=f3(d),p=(0,y.useCallback)(function(e){e===void 0&&(e=[]),!f.current&&o(t=>t===null?e:t.concat(e.filter(e=>!t.includes(e))))},[f]),m=(0,y.useRef)(null),h=p3(t=>{if(d&&!n)return g6;if(!t||t===g6||u.current!==e||a!=null){let t=new Map;for(let n of e){if(!n)continue;if(a&&a.length>0&&!a.includes(n.id)&&n.rect.current){t.set(n.id,n.rect.current);continue}let e=n.node.current,r=e?new Q3(c(e),e):null;n.rect.current=r,r&&t.set(n.id,r)}return t}return t},[e,a,n,d,c]);return(0,y.useEffect)(()=>{u.current=e},[e]),(0,y.useEffect)(()=>{d||p()},[n,d]),(0,y.useEffect)(()=>{a&&a.length>0&&o(null)},[JSON.stringify(a)]),(0,y.useEffect)(()=>{d||typeof s!=`number`||m.current!==null||(m.current=setTimeout(()=>{p(),m.current=null},s))},[s,d,p,...r]),{droppableRects:h,measureDroppableContainers:p,measuringScheduled:a!=null};function g(){switch(l){case m6.Always:return!1;case m6.BeforeDragging:return n;default:return!n}}}function _6(e,t){return p3(n=>e?n||(typeof t==`function`?t(e):e):null,[t,e])}function AVe(e,t){return _6(e,t)}function jVe(e){let{callback:t,disabled:n}=e,r=d3(t),i=(0,y.useMemo)(()=>{if(n||typeof window>`u`||window.MutationObserver===void 0)return;let{MutationObserver:e}=window;return new e(r)},[r,n]);return(0,y.useEffect)(()=>()=>i?.disconnect(),[i]),i}function v6(e){let{callback:t,disabled:n}=e,r=d3(t),i=(0,y.useMemo)(()=>{if(n||typeof window>`u`||window.ResizeObserver===void 0)return;let{ResizeObserver:e}=window;return new e(r)},[n]);return(0,y.useEffect)(()=>()=>i?.disconnect(),[i]),i}function MVe(e){return new Q3(z3(e),e)}function y6(e,t,n){t===void 0&&(t=MVe);let[r,i]=(0,y.useState)(null);function a(){i(r=>{if(!e)return null;if(e.isConnected===!1)return r??n??null;let i=t(e);return JSON.stringify(r)===JSON.stringify(i)?r:i})}let o=jVe({callback(t){if(e)for(let n of t){let{type:t,target:r}=n;if(t===`childList`&&r instanceof HTMLElement&&r.contains(e)){a();break}}}}),s=v6({callback:a});return u3(()=>{a(),e?(s?.observe(e),o?.observe(document.body,{childList:!0,subtree:!0})):(s?.disconnect(),o?.disconnect())},[e]),r}function NVe(e){return L3(e,_6(e))}var b6=[];function PVe(e){let t=(0,y.useRef)(e),n=p3(n=>e?n&&n!==b6&&e&&t.current&&e.parentNode===t.current.parentNode?n:V3(e):b6,[e]);return(0,y.useEffect)(()=>{t.current=e},[e]),n}function FVe(e){let[t,n]=(0,y.useState)(null),r=(0,y.useRef)(e),i=(0,y.useCallback)(e=>{let t=U3(e.target);t&&n(e=>e?(e.set(t,K3(t)),new Map(e)):null)},[]);return(0,y.useEffect)(()=>{let t=r.current;if(e!==t){a(t);let o=e.map(e=>{let t=U3(e);return t?(t.addEventListener(`scroll`,i,{passive:!0}),[t,K3(t)]):null}).filter(e=>e!=null);n(o.length?new Map(o):null),r.current=e}return()=>{a(e),a(t)};function a(e){e.forEach(e=>{U3(e)?.removeEventListener(`scroll`,i)})}},[i,e]),(0,y.useMemo)(()=>e.length?t?Array.from(t.values()).reduce((e,t)=>y3(e,t),A3):X3(e):A3,[e,t])}function x6(e,t){t===void 0&&(t=[]);let n=(0,y.useRef)(null);return(0,y.useEffect)(()=>{n.current=null},t),(0,y.useEffect)(()=>{let t=e!==A3;t&&!n.current&&(n.current=e),!t&&n.current&&(n.current=null)},[e]),n.current?b3(e,n.current):A3}function IVe(e){(0,y.useEffect)(()=>{if(!n3)return;let t=e.map(e=>{let{sensor:t}=e;return t.setup==null?void 0:t.setup()});return()=>{for(let e of t)e?.()}},e.map(e=>{let{sensor:t}=e;return t}))}function LVe(e,t){return(0,y.useMemo)(()=>e.reduce((e,n)=>{let{eventName:r,handler:i}=n;return e[r]=e=>{i(e,t)},e},{}),[e,t])}function S6(e){return(0,y.useMemo)(()=>e?cVe(e):null,[e])}var C6=[];function RVe(e,t){t===void 0&&(t=z3);let[n]=e,r=S6(n?a3(n):null),[i,a]=(0,y.useState)(C6);function o(){a(()=>e.length?e.map(e=>J3(e)?r:new Q3(t(e),e)):C6)}let s=v6({callback:o});return u3(()=>{s?.disconnect(),o(),e.forEach(e=>s?.observe(e))},[e]),i}function w6(e){if(!e)return null;if(e.children.length>1)return e;let t=e.children[0];return s3(t)?t:e}function zVe(e){let{measure:t}=e,[n,r]=(0,y.useState)(null),i=v6({callback:(0,y.useCallback)(e=>{for(let{target:n}of e)if(s3(n)){r(e=>{let r=t(n);return e?{...e,width:r.width,height:r.height}:r});break}},[t])}),[a,o]=m3((0,y.useCallback)(e=>{let n=w6(e);i?.disconnect(),n&&i?.observe(n),r(n?t(n):null)},[t,i]));return(0,y.useMemo)(()=>({nodeRef:a,rect:n,setRef:o}),[n,a,o])}var BVe=[{sensor:l6,options:{}},{sensor:a6,options:{}}],VVe={current:{}},T6={draggable:{measure:B3},droppable:{measure:B3,strategy:m6.WhileDragging,frequency:h6.Optimized},dragOverlay:{measure:z3}},E6=class extends Map{get(e){return e==null?void 0:super.get(e)??void 0}toArray(){return Array.from(this.values())}getEnabled(){return this.toArray().filter(e=>{let{disabled:t}=e;return!t})}getNodeFor(e){return this.get(e)?.node.current??void 0}},HVe={activatorEvent:null,active:null,activeNode:null,activeNodeRect:null,collisions:null,containerNodeRect:null,draggableNodes:new Map,droppableRects:new Map,droppableContainers:new E6,over:null,dragOverlay:{nodeRef:{current:null},rect:null,setRef:D3},scrollableAncestors:[],scrollableAncestorRects:[],measuringConfiguration:T6,measureDroppableContainers:D3,windowRect:null,measuringScheduled:!1},D6={activatorEvent:null,activators:[],active:null,activeNodeRect:null,ariaDescribedById:{draggable:``},dispatch:D3,draggableNodes:new Map,over:null,measureDroppableContainers:D3},O6=(0,y.createContext)(D6),k6=(0,y.createContext)(HVe);function UVe(){return{draggable:{active:null,initialCoordinates:{x:0,y:0},nodes:new Map,translate:{x:0,y:0}},droppable:{containers:new E6}}}function WVe(e,t){switch(t.type){case E3.DragStart:return{...e,draggable:{...e.draggable,initialCoordinates:t.initialCoordinates,active:t.active}};case E3.DragMove:return e.draggable.active==null?e:{...e,draggable:{...e.draggable,translate:{x:t.coordinates.x-e.draggable.initialCoordinates.x,y:t.coordinates.y-e.draggable.initialCoordinates.y}}};case E3.DragEnd:case E3.DragCancel:return{...e,draggable:{...e.draggable,active:null,initialCoordinates:{x:0,y:0},translate:{x:0,y:0}}};case E3.RegisterDroppable:{let{element:n}=t,{id:r}=n,i=new E6(e.droppable.containers);return i.set(r,n),{...e,droppable:{...e.droppable,containers:i}}}case E3.SetDroppableDisabled:{let{id:n,key:r,disabled:i}=t,a=e.droppable.containers.get(n);if(!a||r!==a.key)return e;let o=new E6(e.droppable.containers);return o.set(n,{...a,disabled:i}),{...e,droppable:{...e.droppable,containers:o}}}case E3.UnregisterDroppable:{let{id:n,key:r}=t,i=e.droppable.containers.get(n);if(!i||r!==i.key)return e;let a=new E6(e.droppable.containers);return a.delete(n),{...e,droppable:{...e.droppable,containers:a}}}default:return e}}function GVe(e){let{disabled:t}=e,{active:n,activatorEvent:r,draggableNodes:i}=(0,y.useContext)(O6),a=h3(r),o=h3(n?.id);return(0,y.useEffect)(()=>{if(!t&&!r&&a&&o!=null){if(!x3(a)||document.activeElement===a.target)return;let e=i.get(o);if(!e)return;let{activatorNode:t,node:n}=e;if(!t.current&&!n.current)return;requestAnimationFrame(()=>{for(let e of[t.current,n.current]){if(!e)continue;let t=HBe(e);if(t){t.focus();break}}})}},[r,t,i,o,a]),null}function A6(e,t){let{transform:n,...r}=t;return e!=null&&e.length?e.reduce((e,t)=>t({transform:e,...r}),n):n}function KVe(e){return(0,y.useMemo)(()=>({draggable:{...T6.draggable,...e?.draggable},droppable:{...T6.droppable,...e?.droppable},dragOverlay:{...T6.dragOverlay,...e?.dragOverlay}}),[e?.draggable,e?.droppable,e?.dragOverlay])}function qVe(e){let{activeNode:t,measure:n,initialRect:r,config:i=!0}=e,a=(0,y.useRef)(!1),{x:o,y:s}=typeof i==`boolean`?{x:i,y:i}:i;u3(()=>{if(!o&&!s||!t){a.current=!1;return}if(a.current||!r)return;let e=t?.node.current;if(!e||e.isConnected===!1)return;let i=L3(n(e),r);if(o||(i.x=0),s||(i.y=0),a.current=!0,Math.abs(i.x)>0||Math.abs(i.y)>0){let t=H3(e);t&&t.scrollBy({top:i.y,left:i.x})}},[t,o,s,r,n])}var j6=(0,y.createContext)({...A3,scaleX:1,scaleY:1}),M6;(function(e){e[e.Uninitialized=0]=`Uninitialized`,e[e.Initializing=1]=`Initializing`,e[e.Initialized=2]=`Initialized`})(M6||={});var N6=(0,y.memo)(function(e){let{id:t,accessibility:n,autoScroll:r=!0,children:i,sensors:a=BVe,collisionDetection:o=nVe,measuring:s,modifiers:c,...l}=e,[u,d]=(0,y.useReducer)(WVe,void 0,UVe),[f,p]=JBe(),[m,h]=(0,y.useState)(M6.Uninitialized),g=m===M6.Initialized,{draggable:{active:_,nodes:v,translate:b},droppable:{containers:x}}=u,S=_==null?null:v.get(_),C=(0,y.useRef)({initial:null,translated:null}),w=(0,y.useMemo)(()=>_==null?null:{id:_,data:S?.data??VVe,rect:C},[_,S]),T=(0,y.useRef)(null),[E,D]=(0,y.useState)(null),[O,k]=(0,y.useState)(null),A=f3(l,Object.values(l)),j=_3(`DndDescribedBy`,t),M=(0,y.useMemo)(()=>x.getEnabled(),[x]),N=KVe(s),{droppableRects:P,measureDroppableContainers:F,measuringScheduled:I}=kVe(M,{dragging:g,dependencies:[b.x,b.y],config:N.droppable}),L=DVe(v,_),R=(0,y.useMemo)(()=>O?S3(O):null,[O]),z=De(),B=AVe(L,N.draggable.measure);qVe({activeNode:_==null?null:v.get(_),config:z.layoutShiftCompensation,initialRect:B,measure:N.draggable.measure});let V=y6(L,N.draggable.measure,B),ee=y6(L?L.parentElement:null),te=(0,y.useRef)({activatorEvent:null,active:null,activeNode:L,collisionRect:null,collisions:null,droppableRects:P,draggableNodes:v,draggingNode:null,draggingNodeRect:null,droppableContainers:x,over:null,scrollableAncestors:[],scrollAdjustedTranslate:null}),ne=x.getNodeFor(te.current.over?.id),re=zVe({measure:N.dragOverlay.measure}),ie=re.nodeRef.current??L,ae=g?re.rect??V:null,oe=!!(re.nodeRef.current&&re.rect),se=NVe(oe?null:V),H=S6(ie?a3(ie):null),ce=PVe(g?ne??L:null),le=RVe(ce),ue=A6(c,{transform:{x:b.x-se.x,y:b.y-se.y,scaleX:1,scaleY:1},activatorEvent:O,active:w,activeNodeRect:V,containerNodeRect:ee,draggingNodeRect:ae,over:te.current.over,overlayNodeRect:re.rect,scrollableAncestors:ce,scrollableAncestorRects:le,windowRect:H}),de=R?y3(R,b):null,fe=FVe(ce),pe=x6(fe),me=x6(fe,[V]),he=y3(ue,pe),ge=ae?aVe(ae,ue):null,_e=w&&ge?o({active:w,collisionRect:ge,droppableRects:P,droppableContainers:M,pointerCoordinates:de}):null,ve=P3(_e,`id`),[ye,be]=(0,y.useState)(null),xe=rVe(oe?ue:y3(ue,me),ye?.rect??null,V),Se=(0,y.useRef)(null),Ce=(0,y.useCallback)((e,t)=>{let{sensor:n,options:r}=t;if(T.current==null)return;let i=v.get(T.current);if(!i)return;let a=e.nativeEvent;Se.current=new n({active:T.current,activeNode:i,event:a,options:r,context:te,onAbort(e){if(!v.get(e))return;let{onDragAbort:t}=A.current,n={id:e};t?.(n),f({type:`onDragAbort`,event:n})},onPending(e,t,n,r){if(!v.get(e))return;let{onDragPending:i}=A.current,a={id:e,constraint:t,initialCoordinates:n,offset:r};i?.(a),f({type:`onDragPending`,event:a})},onStart(e){let t=T.current;if(t==null)return;let n=v.get(t);if(!n)return;let{onDragStart:r}=A.current,i={activatorEvent:a,active:{id:t,data:n.data,rect:C}};(0,At.unstable_batchedUpdates)(()=>{r?.(i),h(M6.Initializing),d({type:E3.DragStart,initialCoordinates:e,active:t}),f({type:`onDragStart`,event:i}),D(Se.current),k(a)})},onMove(e){d({type:E3.DragMove,coordinates:e})},onEnd:o(E3.DragEnd),onCancel:o(E3.DragCancel)});function o(e){return async function(){let{active:t,collisions:n,over:r,scrollAdjustedTranslate:i}=te.current,o=null;if(t&&i){let{cancelDrop:s}=A.current;o={activatorEvent:a,active:t,collisions:n,delta:i,over:r},e===E3.DragEnd&&typeof s==`function`&&await Promise.resolve(s(o))&&(e=E3.DragCancel)}T.current=null,(0,At.unstable_batchedUpdates)(()=>{d({type:e}),h(M6.Uninitialized),be(null),D(null),k(null),Se.current=null;let t=e===E3.DragEnd?`onDragEnd`:`onDragCancel`;if(o){let e=A.current[t];e?.(o),f({type:t,event:o})}})}}},[v]),we=OVe(a,(0,y.useCallback)((e,t)=>(n,r)=>{let i=n.nativeEvent,a=v.get(r);if(T.current!==null||!a||i.dndKit||i.defaultPrevented)return;let o={active:a};e(n,t.options,o)===!0&&(i.dndKit={capturedBy:t.sensor},T.current=r,Ce(n,t))},[v,Ce]));IVe(a),u3(()=>{V&&m===M6.Initializing&&h(M6.Initialized)},[V,m]),(0,y.useEffect)(()=>{let{onDragMove:e}=A.current,{active:t,activatorEvent:n,collisions:r,over:i}=te.current;if(!t||!n)return;let a={active:t,activatorEvent:n,collisions:r,delta:{x:he.x,y:he.y},over:i};(0,At.unstable_batchedUpdates)(()=>{e?.(a),f({type:`onDragMove`,event:a})})},[he.x,he.y]),(0,y.useEffect)(()=>{let{active:e,activatorEvent:t,collisions:n,droppableContainers:r,scrollAdjustedTranslate:i}=te.current;if(!e||T.current==null||!t||!i)return;let{onDragOver:a}=A.current,o=r.get(ve),s=o&&o.rect.current?{id:o.id,rect:o.rect.current,data:o.data,disabled:o.disabled}:null,c={active:e,activatorEvent:t,collisions:n,delta:{x:i.x,y:i.y},over:s};(0,At.unstable_batchedUpdates)(()=>{be(s),a?.(c),f({type:`onDragOver`,event:c})})},[ve]),u3(()=>{te.current={activatorEvent:O,active:w,activeNode:L,collisionRect:ge,collisions:_e,droppableRects:P,draggableNodes:v,draggingNode:ie,draggingNodeRect:ae,droppableContainers:x,over:ye,scrollableAncestors:ce,scrollAdjustedTranslate:he},C.current={initial:ae,translated:ge}},[w,L,_e,ge,v,ie,ae,P,x,ye,ce,he]),wVe({...z,delta:b,draggingRect:ge,pointerCoordinates:de,scrollableAncestors:ce,scrollableAncestorRects:le});let Te=(0,y.useMemo)(()=>({active:w,activeNode:L,activeNodeRect:V,activatorEvent:O,collisions:_e,containerNodeRect:ee,dragOverlay:re,draggableNodes:v,droppableContainers:x,droppableRects:P,over:ye,measureDroppableContainers:F,scrollableAncestors:ce,scrollableAncestorRects:le,measuringConfiguration:N,measuringScheduled:I,windowRect:H}),[w,L,V,O,_e,ee,re,v,x,P,ye,F,ce,le,N,I,H]),Ee=(0,y.useMemo)(()=>({activatorEvent:O,activators:we,active:w,activeNodeRect:V,ariaDescribedById:{draggable:j},dispatch:d,draggableNodes:v,over:ye,measureDroppableContainers:F}),[O,we,w,V,d,j,v,ye,F]);return y.createElement(T3.Provider,{value:p},y.createElement(O6.Provider,{value:Ee},y.createElement(k6.Provider,{value:Te},y.createElement(j6.Provider,{value:xe},i)),y.createElement(GVe,{disabled:n?.restoreFocus===!1})),y.createElement(ZBe,{...n,hiddenTextDescribedById:j}));function De(){let e=E?.autoScrollEnabled===!1,t=typeof r==`object`?r.enabled===!1:r===!1,n=g&&!e&&!t;return typeof r==`object`?{...r,enabled:n}:{enabled:n}}}),JVe=(0,y.createContext)(null),P6=`button`,YVe=`Draggable`;function XVe(e){let{id:t,data:n,disabled:r=!1,attributes:i}=e,a=_3(YVe),{activators:o,activatorEvent:s,active:c,activeNodeRect:l,ariaDescribedById:u,draggableNodes:d,over:f}=(0,y.useContext)(O6),{role:p=P6,roleDescription:m=`draggable`,tabIndex:h=0}=i??{},g=c?.id===t,_=(0,y.useContext)(g?j6:JVe),[v,b]=m3(),[x,S]=m3(),C=LVe(o,t),w=f3(n);return u3(()=>(d.set(t,{id:t,key:a,node:v,activatorNode:x,data:w}),()=>{let e=d.get(t);e&&e.key===a&&d.delete(t)}),[d,t]),{active:c,activatorEvent:s,activeNodeRect:l,attributes:(0,y.useMemo)(()=>({role:p,tabIndex:h,"aria-disabled":r,"aria-pressed":g&&p===P6?!0:void 0,"aria-roledescription":m,"aria-describedby":u.draggable}),[r,p,h,g,m,u.draggable]),isDragging:g,listeners:r?void 0:C,node:v,over:f,setNodeRef:b,setActivatorNodeRef:S,transform:_}}function F6(){return(0,y.useContext)(k6)}var ZVe=`Droppable`,QVe={timeout:25};function $Ve(e){let{data:t,disabled:n=!1,id:r,resizeObserverConfig:i}=e,a=_3(ZVe),{active:o,dispatch:s,over:c,measureDroppableContainers:l}=(0,y.useContext)(O6),u=(0,y.useRef)({disabled:n}),d=(0,y.useRef)(!1),f=(0,y.useRef)(null),p=(0,y.useRef)(null),{disabled:m,updateMeasurementsFor:h,timeout:g}={...QVe,...i},_=f3(h??r),v=v6({callback:(0,y.useCallback)(()=>{if(!d.current){d.current=!0;return}p.current!=null&&clearTimeout(p.current),p.current=setTimeout(()=>{l(Array.isArray(_.current)?_.current:[_.current]),p.current=null},g)},[g]),disabled:m||!o}),[b,x]=m3((0,y.useCallback)((e,t)=>{v&&(t&&(v.unobserve(t),d.current=!1),e&&v.observe(e))},[v])),S=f3(t);return(0,y.useEffect)(()=>{!v||!b.current||(v.disconnect(),d.current=!1,v.observe(b.current))},[b,v]),(0,y.useEffect)(()=>(s({type:E3.RegisterDroppable,element:{id:r,key:a,disabled:n,node:b,rect:f,data:S}}),()=>s({type:E3.UnregisterDroppable,key:a,id:r})),[r]),(0,y.useEffect)(()=>{n!==u.current.disabled&&(s({type:E3.SetDroppableDisabled,id:r,key:a,disabled:n}),u.current.disabled=n)},[r,a,n,s]),{active:o,rect:f,isOver:c?.id===r,node:b,over:c,setNodeRef:x}}function eHe(e){let{animation:t,children:n}=e,[r,i]=(0,y.useState)(null),[a,o]=(0,y.useState)(null),s=h3(n);return!n&&!r&&s&&i(s),u3(()=>{if(!a)return;let e=r?.key,n=r?.props.id;if(e==null||n==null){i(null);return}Promise.resolve(t(n,a)).then(()=>{i(null)})},[t,r,a]),y.createElement(y.Fragment,null,n,r?(0,y.cloneElement)(r,{ref:o}):null)}var tHe={x:0,y:0,scaleX:1,scaleY:1};function nHe(e){let{children:t}=e;return y.createElement(O6.Provider,{value:D6},y.createElement(j6.Provider,{value:tHe},t))}var rHe={position:`fixed`,touchAction:`none`},iHe=e=>x3(e)?`transform 250ms ease`:void 0,aHe=(0,y.forwardRef)((e,t)=>{let{as:n,activatorEvent:r,adjustScale:i,children:a,className:o,rect:s,style:c,transform:l,transition:u=iHe}=e;if(!s)return null;let d=i?l:{...l,scaleX:1,scaleY:1},f={...rHe,width:s.width,height:s.height,top:s.top,left:s.left,transform:C3.Transform.toString(d),transformOrigin:i&&r?QBe(r,s):void 0,transition:typeof u==`function`?u(r):u,...c};return y.createElement(n,{className:o,style:f,ref:t},a)}),oHe={duration:250,easing:`ease`,keyframes:e=>{let{transform:{initial:t,final:n}}=e;return[{transform:C3.Transform.toString(t)},{transform:C3.Transform.toString(n)}]},sideEffects:(e=>t=>{let{active:n,dragOverlay:r}=t,i={},{styles:a,className:o}=e;if(a!=null&&a.active)for(let[e,t]of Object.entries(a.active))t!==void 0&&(i[e]=n.node.style.getPropertyValue(e),n.node.style.setProperty(e,t));if(a!=null&&a.dragOverlay)for(let[e,t]of Object.entries(a.dragOverlay))t!==void 0&&r.node.style.setProperty(e,t);return o!=null&&o.active&&n.node.classList.add(o.active),o!=null&&o.dragOverlay&&r.node.classList.add(o.dragOverlay),function(){for(let[e,t]of Object.entries(i))n.node.style.setProperty(e,t);o!=null&&o.active&&n.node.classList.remove(o.active)}})({styles:{active:{opacity:`0`}}})};function sHe(e){let{config:t,draggableNodes:n,droppableContainers:r,measuringConfiguration:i}=e;return d3((e,a)=>{if(t===null)return;let o=n.get(e);if(!o)return;let s=o.node.current;if(!s)return;let c=w6(a);if(!c)return;let{transform:l}=a3(a).getComputedStyle(a),u=R3(l);if(!u)return;let d=typeof t==`function`?t:cHe(t);return Z3(s,i.draggable.measure),d({active:{id:e,data:o.data,node:s,rect:i.draggable.measure(s)},draggableNodes:n,dragOverlay:{node:a,rect:i.dragOverlay.measure(c)},droppableContainers:r,measuringConfiguration:i,transform:u})})}function cHe(e){let{duration:t,easing:n,sideEffects:r,keyframes:i}={...oHe,...e};return e=>{let{active:a,dragOverlay:o,transform:s,...c}=e;if(!t)return;let l={x:o.rect.left-a.rect.left,y:o.rect.top-a.rect.top},u={scaleX:s.scaleX===1?1:a.rect.width*s.scaleX/o.rect.width,scaleY:s.scaleY===1?1:a.rect.height*s.scaleY/o.rect.height},d={x:s.x-l.x,y:s.y-l.y,...u},f=i({...c,active:a,dragOverlay:o,transform:{initial:s,final:d}}),[p]=f,m=f[f.length-1];if(JSON.stringify(p)===JSON.stringify(m))return;let h=r?.({active:a,dragOverlay:o,...c}),g=o.node.animate(f,{duration:t,easing:n,fill:`forwards`});return new Promise(e=>{g.onfinish=()=>{h?.(),e()}})}}var I6=0;function lHe(e){return(0,y.useMemo)(()=>{if(e!=null)return I6++,I6},[e])}var uHe=y.memo(e=>{let{adjustScale:t=!1,children:n,dropAnimation:r,style:i,transition:a,modifiers:o,wrapperElement:s=`div`,className:c,zIndex:l=999}=e,{activatorEvent:u,active:d,activeNodeRect:f,containerNodeRect:p,draggableNodes:m,droppableContainers:h,dragOverlay:g,over:_,measuringConfiguration:v,scrollableAncestors:b,scrollableAncestorRects:x,windowRect:S}=F6(),C=(0,y.useContext)(j6),w=lHe(d?.id),T=A6(o,{activatorEvent:u,active:d,activeNodeRect:f,containerNodeRect:p,draggingNodeRect:g.rect,over:_,overlayNodeRect:g.rect,scrollableAncestors:b,scrollableAncestorRects:x,transform:C,windowRect:S}),E=_6(f),D=sHe({config:r,draggableNodes:m,droppableContainers:h,measuringConfiguration:v}),O=E?g.setRef:void 0;return y.createElement(nHe,null,y.createElement(eHe,{animation:D},d&&w?y.createElement(aHe,{key:w,id:d.id,ref:O,as:s,activatorEvent:u,adjustScale:t,className:c,transition:a,rect:E,style:{zIndex:l,...i},transform:T},n):null))});function L6(e,t,n){let r=e.slice();return r.splice(n<0?r.length+n:n,0,r.splice(t,1)[0]),r}function dHe(e,t){return e.reduce((e,n,r)=>{let i=t.get(n);return i&&(e[r]=i),e},Array(e.length))}function R6(e){return e!==null&&e>=0}function fHe(e,t){if(e===t)return!0;if(e.length!==t.length)return!1;for(let n=0;n<e.length;n++)if(e[n]!==t[n])return!1;return!0}function pHe(e){return typeof e==`boolean`?{draggable:e,droppable:e}:e}var z6=e=>{let{rects:t,activeIndex:n,overIndex:r,index:i}=e,a=L6(t,r,n),o=t[i],s=a[i];return!s||!o?null:{x:s.left-o.left,y:s.top-o.top,scaleX:s.width/o.width,scaleY:s.height/o.height}},B6={scaleX:1,scaleY:1},mHe=e=>{let{activeIndex:t,activeNodeRect:n,index:r,rects:i,overIndex:a}=e,o=i[t]??n;if(!o)return null;if(r===t){let e=i[a];return e?{x:0,y:t<a?e.top+e.height-(o.top+o.height):e.top-o.top,...B6}:null}let s=hHe(i,r,t);return r>t&&r<=a?{x:0,y:-o.height-s,...B6}:r<t&&r>=a?{x:0,y:o.height+s,...B6}:{x:0,y:0,...B6}};function hHe(e,t,n){let r=e[t],i=e[t-1],a=e[t+1];return r?n<t?i?r.top-(i.top+i.height):a?a.top-(r.top+r.height):0:a?a.top-(r.top+r.height):i?r.top-(i.top+i.height):0:0}var V6=`Sortable`,H6=y.createContext({activeIndex:-1,containerId:V6,disableTransforms:!1,items:[],overIndex:-1,useDragOverlay:!1,sortedRects:[],strategy:z6,disabled:{draggable:!1,droppable:!1}});function U6(e){let{children:t,id:n,items:r,strategy:i=z6,disabled:a=!1}=e,{active:o,dragOverlay:s,droppableRects:c,over:l,measureDroppableContainers:u}=F6(),d=_3(V6,n),f=s.rect!==null,p=(0,y.useMemo)(()=>r.map(e=>typeof e==`object`&&`id`in e?e.id:e),[r]),m=o!=null,h=o?p.indexOf(o.id):-1,g=l?p.indexOf(l.id):-1,_=(0,y.useRef)(p),v=!fHe(p,_.current),b=g!==-1&&h===-1||v,x=pHe(a);u3(()=>{v&&m&&u(p)},[v,p,m,u]),(0,y.useEffect)(()=>{_.current=p},[p]);let S=(0,y.useMemo)(()=>({activeIndex:h,containerId:d,disabled:x,disableTransforms:b,items:p,overIndex:g,useDragOverlay:f,sortedRects:dHe(p,c),strategy:i}),[h,d,x.draggable,x.droppable,b,p,g,c,f,i]);return y.createElement(H6.Provider,{value:S},t)}var gHe=e=>{let{id:t,items:n,activeIndex:r,overIndex:i}=e;return L6(n,r,i).indexOf(t)},_He=e=>{let{containerId:t,isSorting:n,wasDragging:r,index:i,items:a,newIndex:o,previousItems:s,previousContainerId:c,transition:l}=e;return!l||!r||s!==a&&i===o?!1:n?!0:o!==i&&t===c},vHe={duration:200,easing:`ease`},W6=`transform`,yHe=C3.Transition.toString({property:W6,duration:0,easing:`linear`}),bHe={roleDescription:`sortable`};function xHe(e){let{disabled:t,index:n,node:r,rect:i}=e,[a,o]=(0,y.useState)(null),s=(0,y.useRef)(n);return u3(()=>{if(!t&&n!==s.current&&r.current){let e=i.current;if(e){let t=z3(r.current,{ignoreTransform:!0}),n={x:e.left-t.left,y:e.top-t.top,scaleX:e.width/t.width,scaleY:e.height/t.height};(n.x||n.y)&&o(n)}}n!==s.current&&(s.current=n)},[t,n,r,i]),(0,y.useEffect)(()=>{a&&o(null)},[a]),a}function G6(e){let{animateLayoutChanges:t=_He,attributes:n,disabled:r,data:i,getNewIndex:a=gHe,id:o,strategy:s,resizeObserverConfig:c,transition:l=vHe}=e,{items:u,containerId:d,activeIndex:f,disabled:p,disableTransforms:m,sortedRects:h,overIndex:g,useDragOverlay:_,strategy:v}=(0,y.useContext)(H6),b=SHe(r,p),x=u.indexOf(o),S=(0,y.useMemo)(()=>({sortable:{containerId:d,index:x,items:u},...i}),[d,i,x,u]),C=(0,y.useMemo)(()=>u.slice(u.indexOf(o)),[u,o]),{rect:w,node:T,isOver:E,setNodeRef:D}=$Ve({id:o,data:S,disabled:b.droppable,resizeObserverConfig:{updateMeasurementsFor:C,...c}}),{active:O,activatorEvent:k,activeNodeRect:A,attributes:j,setNodeRef:M,listeners:N,isDragging:P,over:F,setActivatorNodeRef:I,transform:L}=XVe({id:o,data:S,attributes:{...bHe,...n},disabled:b.draggable}),R=RBe(D,M),z=!!O,B=z&&!m&&R6(f)&&R6(g),V=!_&&P,ee=B?(V&&B?L:null)??(s??v)({rects:h,activeNodeRect:A,activeIndex:f,overIndex:g,index:x}):null,te=R6(f)&&R6(g)?a({id:o,items:u,activeIndex:f,overIndex:g}):x,ne=O?.id,re=(0,y.useRef)({activeId:ne,items:u,newIndex:te,containerId:d}),ie=u!==re.current.items,ae=t({active:O,containerId:d,isDragging:P,isSorting:z,id:o,index:x,items:u,newIndex:re.current.newIndex,previousItems:re.current.items,previousContainerId:re.current.containerId,transition:l,wasDragging:re.current.activeId!=null}),oe=xHe({disabled:!ae,index:x,node:T,rect:w});return(0,y.useEffect)(()=>{z&&re.current.newIndex!==te&&(re.current.newIndex=te),d!==re.current.containerId&&(re.current.containerId=d),u!==re.current.items&&(re.current.items=u)},[z,te,d,u]),(0,y.useEffect)(()=>{if(ne===re.current.activeId)return;if(ne!=null&&re.current.activeId==null){re.current.activeId=ne;return}let e=setTimeout(()=>{re.current.activeId=ne},50);return()=>clearTimeout(e)},[ne]),{active:O,activeIndex:f,attributes:j,data:S,rect:w,index:x,newIndex:te,items:u,isOver:E,isSorting:z,isDragging:P,listeners:N,node:T,overIndex:g,over:F,setNodeRef:R,setActivatorNodeRef:I,setDroppableNodeRef:D,setDraggableNodeRef:M,transform:oe??ee,transition:se()};function se(){if(oe||ie&&re.current.newIndex===x)return yHe;if(!(V&&!x3(k)||!l)&&(z||ae))return C3.Transition.toString({...l,property:W6})}}function SHe(e,t){return typeof e==`boolean`?{draggable:e,droppable:!1}:{draggable:e?.draggable??t.draggable,droppable:e?.droppable??t.droppable}}function K6(e){if(!e)return!1;let t=e.data.current;return!!(t&&`sortable`in t&&typeof t.sortable==`object`&&`containerId`in t.sortable&&`items`in t.sortable&&`index`in t.sortable)}var CHe=[r6.Down,r6.Right,r6.Up,r6.Left],q6=(e,t)=>{let{context:{active:n,collisionRect:r,droppableRects:i,droppableContainers:a,over:o,scrollableAncestors:s}}=t;if(CHe.includes(e.code)){if(e.preventDefault(),!n||!r)return;let t=[];a.getEnabled().forEach(n=>{if(!n||n!=null&&n.disabled)return;let a=i.get(n.id);if(a)switch(e.code){case r6.Down:r.top<a.top&&t.push(n);break;case r6.Up:r.top>a.top&&t.push(n);break;case r6.Left:r.left>a.left&&t.push(n);break;case r6.Right:r.left<a.left&&t.push(n);break}});let c=eVe({active:n,collisionRect:r,droppableRects:i,droppableContainers:t,pointerCoordinates:null}),l=P3(c,`id`);if(l===o?.id&&c.length>1&&(l=c[1].id),l!=null){let e=a.get(n.id),t=a.get(l),o=t?i.get(t.id):null,c=t?.node.current;if(c&&o&&e&&t){let n=V3(c).some((e,t)=>s[t]!==e),i=J6(e,t),a=wHe(e,t),l=n||!i?{x:0,y:0}:{x:a?r.width-o.width:0,y:a?r.height-o.height:0},u={x:o.left,y:o.top};return l.x&&l.y?u:b3(u,l)}}}};function J6(e,t){return!K6(e)||!K6(t)?!1:e.data.current.sortable.containerId===t.data.current.sortable.containerId}function wHe(e,t){return!K6(e)||!K6(t)||!J6(e,t)?!1:e.data.current.sortable.index<t.data.current.sortable.index}var THe=[``,`queued`,`slicing`,`dispatching`,`in_progress`,`completed`,`partial_failure`,`failed`,`cancelled`],Y6=25;function EHe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),[r,i]=(0,y.useState)(``),[a,o]=(0,y.useState)(null),[s,c]=(0,y.useState)(``),[l,u]=(0,y.useState)(0),[d,f]=(0,y.useState)(new Set),[p,m]=(0,y.useState)(!1),{data:h}=K({queryKey:[`slicer-pipelines`],queryFn:()=>Z.listSlicerPipelines()}),{data:g}=K({queryKey:[`printers`],queryFn:()=>Z.getPrinters()}),_=(g??[]).reduce((e,t)=>(e[t.id]=t,e),{}),v=s.startsWith(`p:`)?parseInt(s.slice(2),10):void 0,b=s.startsWith(`c:`)?s.slice(2):void 0,{data:x,isLoading:S}=K({queryKey:[`pipeline-runs-all`,r,a,l,s],queryFn:()=>Z.listAllPipelineRuns({limit:Y6,offset:l,pipelineId:a??void 0,status:r||void 0,targetPrinterId:v,targetModelClass:b}),refetchInterval:15e3}),C=q({mutationFn:e=>Z.cancelPipelineRun(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`pipeline-runs-all`]}),n(e(`pipelineRuns.toast.cancelled`,`Run cancelled`),`success`)},onError:t=>n(t.message||e(`pipelineRuns.toast.cancelFailed`,`Cancel failed`),`error`)}),w=q({mutationFn:e=>Z.retryFailedPipelineRun(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`pipeline-runs-all`]}),n(e(`pipelineRuns.toast.retryStarted`,`Retry started`),`success`)},onError:t=>n(t.message||e(`pipelineRuns.toast.retryFailed`,`Retry failed`),`error`)}),T=q({mutationFn:()=>Z.clearTerminalPipelineRuns(),onSuccess:r=>{t.invalidateQueries({queryKey:[`pipeline-runs-all`]}),m(!1),u(0),n(e(`pipelineRuns.toast.cleared`,`{{n}} runs cleared`,{n:r.deleted}),`success`)},onError:t=>n(t.message||e(`pipelineRuns.toast.clearFailed`,`Clear failed`),`error`)}),E=x?.runs??[],D=x?.total??0,O=(h?.pipelines??[]).reduce((e,t)=>(e[t.id]=t,e),{}),k=e=>{f(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},A=!!(r||a!==null||s),j=(()=>{let e=new Set,t=new Set;for(let n of h?.pipelines??[])n.target_kind===`printer_class`&&n.target_model_class?t.add(n.target_model_class):n.target_printer_id&&e.add(n.target_printer_id);return{printers:(g??[]).filter(t=>e.has(t.id)),classes:Array.from(t).sort()}})();return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 mb-4 text-sm`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>t.invalidateQueries({queryKey:[`pipeline-runs-all`]}),"aria-label":e(`common.refresh`,`Refresh`),title:e(`common.refresh`,`Refresh`),className:`p-1.5 text-bambu-gray hover:text-white border border-bambu-dark-tertiary rounded`,children:(0,G.jsx)(Vl,{className:`w-3.5 h-3.5`})}),(0,G.jsx)(X6,{icon:(0,G.jsx)($u,{className:`w-3.5 h-3.5 text-bambu-gray`}),ariaLabel:e(`pipelineRuns.filter.pipeline`,`Pipeline`),value:a===null?``:String(a),onChange:e=>{u(0),o(e?parseInt(e,10):null)},options:[{value:``,label:e(`pipelineRuns.filter.allPipelines`,`All pipelines`)},...(h?.pipelines??[]).map(e=>({value:String(e.id),label:e.name}))]}),(0,G.jsx)(X6,{icon:(0,G.jsx)(Cc,{className:`w-3.5 h-3.5 text-bambu-gray`}),ariaLabel:e(`pipelineRuns.filter.status`,`Status`),value:r,onChange:e=>{u(0),i(e)},options:THe.map(t=>({value:t,label:t===``?e(`pipelineRuns.filter.allStatus`,`All statuses`):e(`settings.pipelines.runs.status.${t}`,t)}))}),(j.printers.length>0||j.classes.length>0)&&(0,G.jsx)(X6,{icon:(0,G.jsx)(Ll,{className:`w-3.5 h-3.5 text-bambu-gray`}),ariaLabel:e(`pipelineRuns.filter.target`,`Target`),value:s,onChange:e=>{u(0),c(e)},options:[{value:``,label:e(`pipelineRuns.filter.allTargets`,`All targets`)},...j.printers.map(t=>({value:`p:${t.id}`,label:t.name,group:e(`settings.pipelines.field.targetKindSpecific`,`Specific printer`)})),...j.classes.map(t=>({value:`c:${t}`,label:e(`library.runWithPipeline.classTarget`,`Any {{model}}`,{model:t}),group:e(`settings.pipelines.field.targetKindClass`,`Printer class`)}))]}),A&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>{i(``),o(null),c(``),u(0)},className:`text-xs text-bambu-gray hover:text-white`,children:e(`pipelineRuns.filter.clear`,`Clear filters`)}),(0,G.jsxs)(`div`,{className:`ml-auto flex items-center gap-2 text-xs text-bambu-gray`,children:[!S&&D>0&&(0,G.jsx)(`span`,{children:e(`pipelineRuns.totalCount`,`{{n}} run`,{n:D,count:D})}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>m(!0),disabled:D===0,className:`flex items-center gap-1 px-2 py-1 text-red-700 dark:text-red-400 hover:bg-red-50 dark:hover:bg-red-500/10 rounded disabled:opacity-50 disabled:cursor-not-allowed`,children:[(0,G.jsx)(Nu,{className:`w-3 h-3`}),e(`pipelineRuns.clearLog`,`Clear log`)]})]})]}),p&&(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 bg-black/60 flex items-center justify-center p-4`,onClick:()=>m(!1),role:`dialog`,"aria-modal":`true`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-2xl w-full max-w-md p-4`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Nu,{className:`w-4 h-4 text-red-600 dark:text-red-400`}),e(`pipelineRuns.clearConfirmTitle`,`Clear log?`)]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-2`,children:e(`pipelineRuns.clearConfirmBody`,`Delete every completed, failed, cancelled, and partial-failure pipeline run? In-flight runs are kept. This cannot be undone.`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-2 mt-4`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>m(!1),disabled:T.isPending,className:`px-3 py-1.5 text-sm text-bambu-gray hover:text-white`,children:e(`common.cancel`,`Cancel`)}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>T.mutate(),disabled:T.isPending,className:`px-3 py-1.5 text-sm bg-red-500 hover:bg-red-600 text-white rounded disabled:opacity-50 flex items-center gap-1`,children:[T.isPending?(0,G.jsx)(Y,{className:`w-3.5 h-3.5 animate-spin`}):(0,G.jsx)(Nu,{className:`w-3.5 h-3.5`}),e(`pipelineRuns.clearConfirmAction`,`Clear`)]})]})]})}),S&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),e(`pipelineRuns.loading`,`Loading…`)]}),!S&&E.length===0&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:A?e(`pipelineRuns.filter.noMatches`,`No runs match the current filters.`):e(`pipelineRuns.empty`,`No pipeline runs yet.`)}),!S&&E.length>0&&(0,G.jsx)(`div`,{className:`space-y-1.5`,children:E.map(e=>(0,G.jsx)(DHe,{run:e,pipeline:e.pipeline_id?O[e.pipeline_id]:void 0,printersById:_,expanded:d.has(e.id),onToggle:()=>k(e.id),onCancel:()=>C.mutate(e.id),onRetry:()=>w.mutate(e.id),cancelling:C.isPending,retrying:w.isPending},e.id))}),!S&&D>Y6&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between mt-4 text-sm`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>u(Math.max(0,l-Y6)),disabled:l===0,className:`px-3 py-1.5 rounded border border-bambu-dark-tertiary disabled:opacity-50 text-bambu-gray hover:text-white`,children:e(`common.previous`,`Previous`)}),(0,G.jsx)(`span`,{className:`text-bambu-gray text-xs`,children:e(`pipelineRuns.pagination`,`{{start}}–{{end}} of {{total}}`,{start:l+1,end:Math.min(l+Y6,D),total:D})}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>u(l+Y6),disabled:l+Y6>=D,className:`px-3 py-1.5 rounded border border-bambu-dark-tertiary disabled:opacity-50 text-bambu-gray hover:text-white`,children:e(`common.next`,`Next`)})]})]})}function DHe({run:e,pipeline:t,printersById:n,expanded:r,onToggle:i,onCancel:a,onRetry:o,cancelling:s,retrying:c}){let{t:l}=U(),u=[`queued`,`slicing`,`dispatching`,`in_progress`].includes(e.status),d=e.status===`partial_failure`||e.status===`failed`,f=e.status===`cancelled`&&e.error_message===`Cancelled by user`,p=e.target_kind===`printer_class`&&e.target_model_class?l(`library.runWithPipeline.classTarget`,`Any {{model}}`,{model:e.target_model_class}):e.target_printer_id&&n[e.target_printer_id]?n[e.target_printer_id].name:null;return(0,G.jsxs)(`div`,{className:`rounded-md border border-bambu-dark-tertiary bg-bambu-dark/40 overflow-hidden`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 px-3 py-2`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:i,"aria-label":r?l(`common.collapse`,`Collapse`):l(`common.expand`,`Expand`),"aria-expanded":r,className:`text-bambu-gray hover:text-white flex-shrink-0`,children:r?(0,G.jsx)(ps,{className:`w-4 h-4`}):(0,G.jsx)(ms,{className:`w-4 h-4`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-x-2 gap-y-0.5 text-sm`,children:[(0,G.jsxs)(`span`,{className:`font-medium text-white`,children:[`#`,e.id]}),(0,G.jsx)(`span`,{className:`text-white truncate`,children:t?.name??e.pipeline_name??`—`}),(0,G.jsx)(OHe,{status:e.status}),p&&(0,G.jsxs)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-bambu-dark-tertiary text-bambu-gray flex items-center gap-1`,children:[(0,G.jsx)(Ll,{className:`w-3 h-3`}),p]}),e.parent_run_id&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray/70 italic`,children:l(`pipelineRuns.retryOf`,`retry of #{{n}}`,{n:e.parent_run_id})})]}),e.source_filename&&(0,G.jsxs)(`div`,{className:`mt-0.5 flex items-center gap-1.5 text-xs text-bambu-gray min-w-0`,children:[(0,G.jsx)(dc,{className:`w-3 h-3 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,title:e.source_filename,children:e.source_filename})]}),(0,G.jsxs)(`div`,{className:`mt-0.5 text-xs text-bambu-gray/70 flex flex-wrap items-center gap-x-2`,children:[(0,G.jsx)(`span`,{children:new Date(e.created_at).toLocaleString()}),e.copies>1&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{className:`text-bambu-gray/40`,children:`·`}),(0,G.jsx)(`span`,{children:l(`pipelineRuns.copies`,`{{n}} copies`,{n:e.copies})})]}),(e.copies_completed>0||e.copies_failed>0||e.copies_cancelled>0)&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{className:`text-bambu-gray/40`,children:`·`}),(0,G.jsxs)(`span`,{children:[(0,G.jsx)(`span`,{className:`text-bambu-green`,children:e.copies_completed}),`/`,e.copies]}),e.copies_failed>0&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{className:`text-bambu-gray/40`,children:`·`}),(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:l(`pipelineRuns.failedCount`,`{{n}} failed`,{n:e.copies_failed})})]})]})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 flex-shrink-0`,children:[u&&(0,G.jsxs)(`button`,{type:`button`,onClick:a,disabled:s,"aria-label":l(`common.cancel`,`Cancel`),className:`text-xs px-2 py-1 text-red-700 dark:text-red-400 hover:bg-red-50 dark:hover:bg-red-500/10 rounded disabled:opacity-50 flex items-center gap-1`,children:[(0,G.jsx)(td,{className:`w-3 h-3`}),l(`common.cancel`,`Cancel`)]}),d&&(0,G.jsxs)(`button`,{type:`button`,onClick:o,disabled:c,"aria-label":l(`pipelineRuns.retryFailed`,`Retry failed`),className:`text-xs px-2 py-1 text-bambu-green hover:bg-bambu-green/10 rounded disabled:opacity-50 flex items-center gap-1`,children:[(0,G.jsx)(Ul,{className:`w-3 h-3`}),l(`pipelineRuns.retryFailed`,`Retry failed`)]})]})]}),r&&(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary px-3 py-2 bg-bambu-dark/30`,children:[(0,G.jsx)(`div`,{className:`space-y-1.5`,children:e.jobs.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-xs`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray/60 w-14 flex-shrink-0`,children:l(`pipelineRuns.copyN`,`Copy {{n}}`,{n:e.copy_index+1})}),(0,G.jsx)(kHe,{status:e.status}),e.assigned_printer_name&&(0,G.jsxs)(`span`,{className:`text-bambu-gray flex items-center gap-1 truncate`,children:[(0,G.jsx)(Ll,{className:`w-3 h-3 text-bambu-gray/60`}),(0,G.jsx)(`span`,{className:`text-white truncate`,children:e.assigned_printer_name})]}),e.error_message&&(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400 truncate`,title:e.error_message,children:e.error_message})]},e.id))}),e.error_message&&!f&&(0,G.jsx)(`div`,{className:`text-xs text-red-700 dark:text-red-400 mt-2 pt-2 border-t border-bambu-dark-tertiary`,children:e.error_message}),f&&(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray/70 mt-2 pt-2 border-t border-bambu-dark-tertiary italic`,children:l(`pipelineRuns.cancelledByUser`,`Cancelled by user`)})]})]})}function OHe({status:e}){let{t}=U();return(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 rounded text-[10px] uppercase font-semibold tracking-wide whitespace-nowrap ${{queued:`bg-slate-700 text-slate-200`,slicing:`bg-sky-700 text-sky-100`,dispatching:`bg-sky-700 text-sky-100`,in_progress:`bg-emerald-700 text-emerald-100`,completed:`bg-emerald-700 text-emerald-100`,failed:`bg-red-700 text-red-100`,partial_failure:`bg-amber-700 text-amber-100`,cancelled:`bg-rose-900 text-rose-200`}[e]}`,children:t(`settings.pipelines.runs.status.${e}`,e)})}function X6({value:e,onChange:t,options:n,icon:r,ariaLabel:i}){let[a,o]=(0,y.useState)(!1),s=(0,y.useRef)(null);(0,y.useEffect)(()=>{if(!a)return;let e=e=>{s.current&&!s.current.contains(e.target)&&o(!1)},t=e=>{e.key===`Escape`&&o(!1)};return document.addEventListener(`mousedown`,e),document.addEventListener(`keydown`,t),()=>{document.removeEventListener(`mousedown`,e),document.removeEventListener(`keydown`,t)}},[a]);let c=n.find(t=>t.value===e),l=[];for(let e of n){let t=l[l.length-1];t&&t.group===e.group?t.options.push(e):l.push({group:e.group,options:[e]})}return(0,G.jsxs)(`div`,{ref:s,className:`relative`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>o(e=>!e),"aria-label":i,"aria-haspopup":`listbox`,"aria-expanded":a,className:`flex items-center gap-1.5 px-2 py-1 border border-bambu-dark-tertiary rounded bg-bambu-dark/40 text-xs text-white hover:border-bambu-gray/60 focus:outline-none focus:ring-1 focus:ring-bambu-green/40`,children:[r,(0,G.jsx)(`span`,{className:`truncate max-w-[14rem]`,children:c?.label??``}),(0,G.jsx)(ps,{className:`w-3 h-3 text-bambu-gray transition-transform ${a?`rotate-180`:``}`})]}),a&&(0,G.jsx)(`div`,{role:`listbox`,className:`absolute left-0 top-full mt-1 z-30 min-w-full max-h-72 overflow-auto rounded border border-bambu-dark-tertiary bg-bambu-dark-secondary shadow-xl py-1`,children:l.map((n,r)=>(0,G.jsxs)(`div`,{children:[n.group&&(0,G.jsx)(`div`,{className:`px-2 pt-1.5 pb-0.5 text-[10px] uppercase tracking-wider text-bambu-gray/60`,children:n.group}),n.options.map(n=>{let r=n.value===e;return(0,G.jsxs)(`button`,{type:`button`,role:`option`,"aria-selected":r,onClick:()=>{t(n.value),o(!1)},className:`flex w-full items-center gap-1.5 text-left px-2 py-1 text-xs whitespace-nowrap ${r?`bg-bambu-dark-tertiary text-white`:`text-bambu-gray hover:bg-bambu-dark-tertiary/60 hover:text-white`}`,children:[(0,G.jsx)(fs,{className:`w-3 h-3 flex-shrink-0 ${r?`opacity-100`:`opacity-0`}`}),(0,G.jsx)(`span`,{className:`truncate`,children:n.label})]},n.value)})]},r))})]})}function kHe({status:e}){let{t}=U();return(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 rounded text-[10px] uppercase font-semibold tracking-wide ${{pending:`bg-slate-700 text-slate-200`,awaiting_printer:`bg-sky-700 text-sky-100`,queued:`bg-sky-700 text-sky-100`,printing:`bg-emerald-700 text-emerald-100`,completed:`bg-emerald-700 text-emerald-100`,failed:`bg-red-700 text-red-100`,cancelled:`bg-rose-900 text-rose-200`}[e]}`,children:t(`pipelineRuns.jobStatus.${e}`,e)})}function AHe(e){return e>=1e3?`${(e/1e3).toFixed(1)}kg`:`${Math.round(e)}g`}function jHe({activeCount:e,pendingCount:t,totalTime:n,totalWeight:r,historyCount:i,t:a}){return(0,G.jsx)(`div`,{className:`flex items-center gap-3 sm:gap-5 flex-wrap px-4 py-3 bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary mb-6`,children:[{icon:Ml,value:e,label:a(`queue.summary.printing`),color:`text-blue-600 dark:text-blue-400`},{icon:js,value:t,label:a(`queue.summary.queued`),color:`text-yellow-600 dark:text-yellow-400`},{icon:Mu,value:op(n),label:a(`queue.summary.totalTime`),color:`text-bambu-green`},{icon:Yu,value:AHe(r),label:a(`queue.summary.totalWeight`),color:`text-purple-600 dark:text-purple-400`},{icon:xs,value:i,label:a(`queue.summary.history`),color:`text-bambu-gray`}].map((e,t)=>(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[t>0&&(0,G.jsx)(`span`,{className:`hidden sm:block text-bambu-dark-tertiary`,children:`|`}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(e.icon,{className:`w-4 h-4 ${e.color}`}),(0,G.jsx)(`span`,{className:`text-sm font-semibold text-white`,children:e.value}),(0,G.jsx)(`span`,{className:`text-xs sm:text-sm text-bambu-gray`,children:e.label})]})]},t))})}var Z6={completed:{icon:xs,color:`text-emerald-600 dark:text-emerald-400`,border:`border-l-emerald-500`},failed:{icon:Ds,color:`text-red-600 dark:text-red-400`,border:`border-l-red-500`},skipped:{icon:uu,color:`text-orange-600 dark:text-orange-400`,border:`border-l-gray-500`},cancelled:{icon:Uo,color:`text-gray-400`,border:`border-l-gray-500`}};function MHe(e){if(!e)return null;let t=e.startsWith(`#`)?e.slice(1):e;return/^0{6,8}$/.test(t)||!/^[0-9a-fA-F]{6,8}$/.test(t)?null:`#${t.slice(0,6)}`}function Q6({item:e,onRequeue:t,onRemove:n,timeFormat:r=`system`,hasPermission:i,canModify:a,t:o}){let s=Z6[e.status]||Z6.cancelled,c=s.icon,l=LT(e),u=e.archive_thumbnail?Z.getArchiveThumbnail(e.archive_id):e.library_file_thumbnail?Z.getLibraryFileThumbnailUrl(e.library_file_id):null,d=e.completed_at||e.created_at,f=MHe(e.filament_color),p=e.filament_used_grams?Math.round(e.filament_used_grams):null,m=!!e.error_message&&(e.status===`failed`||e.status===`skipped`);return(0,G.jsxs)(`div`,{className:`px-3 py-2 bg-bambu-dark-secondary rounded-lg border border-bambu-dark-tertiary border-l-[3px] ${s.border}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 sm:gap-3`,children:[(0,G.jsx)(c,{className:`w-4 h-4 shrink-0 ${s.color}`}),(0,G.jsxs)(`div`,{className:`relative shrink-0 history-thumb-hover`,children:[(0,G.jsx)(`div`,{className:`w-8 h-8 bg-bambu-dark rounded overflow-hidden`,children:u?(0,G.jsx)(`img`,{src:u,alt:``,className:`w-full h-full object-cover`}):(0,G.jsx)(`div`,{className:`w-full h-full flex items-center justify-center text-bambu-gray`,children:(0,G.jsx)(qc,{className:`w-4 h-4`})})}),u&&(0,G.jsx)(`div`,{className:`history-thumb-preview absolute z-[60] left-full top-0 ml-2 w-48 h-48 pointer-events-none opacity-0 transition-opacity`,children:(0,G.jsx)(`img`,{src:u,alt:``,className:`w-full h-full object-cover rounded-lg shadow-2xl border-2 border-bambu-dark-tertiary bg-bambu-dark`})})]}),(0,G.jsx)(`span`,{className:`text-sm text-white font-medium truncate min-w-0 flex-1`,children:l}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray shrink-0`,title:d??void 0,children:sp(d,r,o)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-0.5 shrink-0`,children:[(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:t,disabled:!i(`queue:create`),title:i(`queue:create`)?o(`queue.actions.requeue`):o(`queue.permissions.noRequeue`),className:`text-bambu-green hover:text-bambu-green/80 hover:bg-bambu-green/10 p-1.5`,children:(0,G.jsx)(Vl,{className:`w-3.5 h-3.5`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:n,disabled:!a(`queue`,`delete`,e.created_by_id),title:a(`queue`,`delete`,e.created_by_id)?o(`common.remove`):o(`queue.permissions.noRemove`),className:`p-1.5`,children:(0,G.jsx)(Nu,{className:`w-3.5 h-3.5`})})]})]}),(0,G.jsxs)(`div`,{className:`mt-1 ml-[3.25rem] flex flex-wrap items-center gap-x-3 gap-y-1 text-xs text-bambu-gray`,children:[e.printer_name&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 shrink-0`,children:[(0,G.jsx)(Ll,{className:`w-3 h-3`}),(0,G.jsx)(`span`,{className:`truncate max-w-[100px] sm:max-w-[140px]`,children:e.printer_name})]}),(f||p)&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 shrink-0`,children:[f?(0,G.jsx)(`span`,{className:`inline-block w-2.5 h-2.5 rounded-full border border-white/15`,style:{backgroundColor:f},"aria-hidden":!0}):(0,G.jsx)(Yu,{className:`w-3 h-3`}),(0,G.jsxs)(`span`,{className:`truncate`,children:[p?`${p}g`:null,p&&e.filament_type?` ${e.filament_type}`:null,!p&&e.filament_type?e.filament_type:null]})]}),e.print_time_seconds&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 shrink-0`,children:[(0,G.jsx)(Mu,{className:`w-3 h-3`}),op(e.print_time_seconds)]}),e.created_by_username&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 shrink-0`,title:o(`queue.addedBy`,{name:e.created_by_username}),children:[(0,G.jsx)(Vu,{className:`w-3 h-3`}),(0,G.jsx)(`span`,{className:`truncate max-w-[120px]`,children:e.created_by_username})]})]}),m&&(0,G.jsxs)(`div`,{className:`mt-1 ml-[3.25rem] flex items-start gap-1 text-xs text-red-700 dark:text-red-400`,children:[(0,G.jsx)(ys,{className:`w-3 h-3 mt-0.5 shrink-0`}),(0,G.jsx)(`span`,{className:`break-words`,children:e.error_message})]})]})}function $6(e){return e.printer_id==null?e.target_model?`model:${e.target_model}`:`unassigned`:`printer:${e.printer_id}`}function e8(e,t,n){if(n){let n=+!!e.been_jumped,r=+!!t.been_jumped;if(n!==r)return r-n;let i=e.print_time_seconds??1/0,a=t.print_time_seconds??1/0;if(i!==a)return i-a}return e.position-t.position}function NHe(e,t,n){let r=$6(e),i=$6(t);if(r!==i){if(e.printer_id!=null&&t.printer_id!=null)return e.printer_id-t.printer_id;let n=t8(e),a=t8(t);return n===a?r<i?-1:1:n-a}return e8(e,t,n)}function t8(e){return e.printer_id==null?e.target_model?1:2:0}function PHe(e){return e?e.split(` | `).map(e=>e.trim()).every(e=>e.startsWith(`Busy:`)):!1}var n8=3600*1e3,r8=24,i8=r8*n8,FHe=32,IHe=40;function LHe(e){return e.toLocaleTimeString(void 0,{hour:`numeric`})}function a8(e){return e.toLocaleTimeString(void 0,{hour:`2-digit`,minute:`2-digit`})}function RHe({queueItems:e,printers:t,printerStatuses:n,sjfEnabled:r,onItemClick:i,t:a}){let[o,s]=(0,y.useState)(()=>new Date);(0,y.useEffect)(()=>{let e=setInterval(()=>s(new Date),6e4);return()=>clearInterval(e)},[]);let[c,l]=(0,y.useState)(0),u=(0,y.useMemo)(()=>{let e=o.getTime()+c;return Math.floor(e/n8)*n8},[o,c]),d=u+i8,f=o.getTime(),p=(0,y.useMemo)(()=>{let t=[],i=new Map,a=new Set,o=new Map;for(let r of e)if(r.status===`printing`){let e=r.printer_id==null?void 0:n[r.printer_id],i=ep(r.started_at)||new Date,s;if(e?.remaining_time!=null&&e.remaining_time>0)s=new Date(f+e.remaining_time*60*1e3);else if(r.print_time_seconds){let t=e?.progress||0,n=Math.max(0,1-t/100);s=new Date(f+r.print_time_seconds*n*1e3)}else s=new Date(f+n8);t.push({item:r,estimatedStart:i,estimatedEnd:s,progress:e?.progress??void 0,type:`printing`});let c=$6(r);a.add(c),o.set(c,Math.max(o.get(c)??f,s.getTime()))}else if(r.status===`pending`){if(r.manual_start||r.waiting_reason&&!PHe(r.waiting_reason))continue;let e=$6(r);i.has(e)||i.set(e,[]),i.get(e).push(r)}let s=Date.now()+4320*n8;for(let[e,n]of i){n.sort((e,t)=>e8(e,t,r));let i=a.has(e),c=n[0]?ep(n[0].scheduled_time):null,l=c&&c.getTime()<=s;if(!i&&!l)continue;let u=o.get(e)??f;for(let e of n){let n=ep(e.scheduled_time);n&&n.getTime()<=s&&(u=Math.max(u,n.getTime()));let r=(e.print_time_seconds||3600)*1e3;t.push({item:e,estimatedStart:new Date(u),estimatedEnd:new Date(u+r),type:`queued`}),u+=r}}return t},[e,n,f,r]),m=(0,y.useMemo)(()=>{let e=[];for(let n of t)e.push({key:`printer:${n.id}`,label:n.name,printerId:n.id,targetModel:null});let n=new Set,r=!1;for(let t of p)if(t.item.printer_id==null)if(t.item.target_model){let r=`model:${t.item.target_model}`;n.has(r)||(n.add(r),e.push({key:r,label:`${a(`queue.filter.any`)} ${t.item.target_model}`,printerId:null,targetModel:t.item.target_model}))}else r=!0;return r&&e.push({key:`unassigned`,label:a(`queue.filter.unassigned`),printerId:null,targetModel:null}),e},[t,p,a]),h=(0,y.useMemo)(()=>{let e=new Map;for(let t of p){let n;n=t.item.printer_id==null?t.item.target_model?`model:${t.item.target_model}`:`unassigned`:`printer:${t.item.printer_id}`,e.has(n)||e.set(n,[]),e.get(n).push(t)}return e},[p]),g=(0,y.useMemo)(()=>{let e=[];for(let t=0;t<=r8;t+=2){let n=u+t*n8;e.push({ms:n,pct:t/r8*100,label:LHe(new Date(n))})}return e},[u]),_=(f-u)/i8*100,v=_>=0&&_<=100,b=(0,y.useMemo)(()=>{let e=0;for(let t of p)e=Math.max(e,t.estimatedEnd.getTime());return e>0?new Date(e):null},[p]),x=(0,y.useRef)(null);return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex flex-col sm:flex-row sm:items-center justify-between gap-3 mb-5`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>l(e=>e-12*n8),className:`p-1.5`,title:a(`queue.timeline.window.back12h`),children:(0,G.jsx)(hs,{className:`w-4 h-4`})}),(0,G.jsxs)(`span`,{className:`text-sm font-medium text-white min-w-[180px] text-center`,children:[new Date(u).toLocaleString(void 0,{weekday:`short`,month:`short`,day:`numeric`,hour:`2-digit`,minute:`2-digit`}),` → `,new Date(d).toLocaleTimeString(void 0,{hour:`2-digit`,minute:`2-digit`})]}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>l(e=>e+12*n8),className:`p-1.5`,title:a(`queue.timeline.window.forward12h`),children:(0,G.jsx)(ms,{className:`w-4 h-4`})}),c!==0&&(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>l(0),className:`text-xs text-bambu-green`,children:a(`queue.timeline.window.now`)})]}),b&&(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray flex items-center gap-1.5`,children:[(0,G.jsx)(js,{className:`w-3.5 h-3.5`}),a(`queue.timeline.allDoneBy`,{time:b.toLocaleString(void 0,{weekday:`short`,hour:`2-digit`,minute:`2-digit`})})]})]}),m.length>0&&p.length===0&&(0,G.jsx)(`div`,{className:`mb-4 p-3 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark/40 text-xs text-bambu-gray`,children:a(`queue.timeline.nothingCommitted`)}),m.length===0?(0,G.jsxs)(`div`,{className:`flex flex-col items-center justify-center py-16 text-bambu-gray`,children:[(0,G.jsx)(qc,{className:`w-12 h-12 mb-3 opacity-30`}),(0,G.jsx)(`p`,{className:`text-sm`,children:a(`queue.timeline.noData`)})]}):(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary overflow-hidden`,children:[(0,G.jsxs)(`div`,{className:`flex border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`div`,{className:`w-32 sm:w-40 shrink-0 px-3 py-2 text-xs font-medium text-bambu-gray border-r border-bambu-dark-tertiary`,children:a(`queue.timeline.printerColumnHeader`)}),(0,G.jsx)(`div`,{className:`relative flex-1 h-9`,children:g.map(e=>(0,G.jsx)(`div`,{className:`absolute top-0 bottom-0 border-l border-bambu-dark-tertiary/40 text-[10px] sm:text-xs text-bambu-gray pl-1 flex items-center`,style:{left:`${e.pct}%`},children:e.label},e.ms))})]}),(0,G.jsxs)(`div`,{ref:x,className:`relative`,children:[m.map(e=>{let t=h.get(e.key)??[];return(0,G.jsxs)(`div`,{className:`flex border-b border-bambu-dark-tertiary/40 last:border-b-0`,children:[(0,G.jsxs)(`div`,{className:`w-32 sm:w-40 shrink-0 px-3 py-3 border-r border-bambu-dark-tertiary flex items-center gap-2`,children:[(0,G.jsx)(Ll,{className:`w-3.5 h-3.5 shrink-0 ${e.printerId==null&&e.targetModel==null?`text-orange-600 dark:text-orange-400`:e.targetModel?`text-blue-600 dark:text-blue-400`:`text-bambu-green`}`}),(0,G.jsx)(`span`,{className:`text-sm text-white truncate`,children:e.label})]}),(0,G.jsxs)(`div`,{className:`relative flex-1`,style:{height:56},children:[g.map(e=>(0,G.jsx)(`div`,{className:`absolute top-0 bottom-0 border-l border-bambu-dark-tertiary/30`,style:{left:`${e.pct}%`}},e.ms)),(0,G.jsx)(`div`,{className:`absolute inset-0 opacity-30`,style:{backgroundImage:`repeating-linear-gradient(45deg, transparent, transparent 6px, rgba(255,255,255,0.04) 6px, rgba(255,255,255,0.04) 12px)`},"aria-hidden":!0}),t.map(e=>{let t=Math.max(u,e.estimatedStart.getTime()),n=Math.min(d,e.estimatedEnd.getTime());if(n<=u||t>=d)return null;let r=(t-u)/i8*100,a=(n-t)/i8*100,o=e.item.archive_name||e.item.library_file_name||`#${e.item.id}`,s=e.item.archive_thumbnail?Z.getArchiveThumbnail(e.item.archive_id):e.item.library_file_thumbnail?Z.getLibraryFileThumbnailUrl(e.item.library_file_id):null,c=e.type===`printing`,l=e.item.batch_id!=null;return(0,G.jsxs)(`button`,{onClick:()=>i(e.item),title:[o,`${a8(e.estimatedStart)} → ${a8(e.estimatedEnd)}`,e.item.print_time_seconds?op(e.item.print_time_seconds):null,c&&e.progress!=null?`${Math.round(e.progress)}%`:null,e.item.batch_name?`batch: ${e.item.batch_name}`:null].filter(Boolean).join(` · `),className:`absolute rounded-md transition-all hover:brightness-110 hover:z-10 overflow-hidden flex items-center gap-1.5 px-1.5 text-left ${c?`bg-blue-500/30 border border-blue-400/60`:l?`bg-cyan-500/20 border border-cyan-400/50`:`bg-bambu-green/20 border border-bambu-green/40`}`,style:{left:`${r}%`,width:`max(${FHe}px, ${a}%)`,top:8,height:IHe},children:[s&&(0,G.jsx)(`img`,{src:s,alt:``,className:`w-7 h-7 rounded object-cover shrink-0 bg-bambu-dark`}),(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`div`,{className:`text-xs text-white font-medium truncate leading-tight`,children:o}),(0,G.jsxs)(`div`,{className:`text-[10px] text-bambu-gray truncate leading-tight`,children:[e.item.print_time_seconds?op(e.item.print_time_seconds):``,c&&e.progress!=null?` · ${Math.round(e.progress)}%`:``]})]}),c&&e.progress!=null&&(0,G.jsx)(`div`,{className:`absolute bottom-0 left-0 h-0.5 bg-blue-300`,style:{width:`${e.progress}%`},"aria-hidden":!0})]},e.item.id)})]})]},e.key)}),v&&(0,G.jsxs)(`div`,{className:`absolute top-0 bottom-0 pointer-events-none z-20 flex inset-x-0`,children:[(0,G.jsx)(`div`,{className:`w-32 sm:w-40 shrink-0`}),(0,G.jsx)(`div`,{className:`relative flex-1`,children:(0,G.jsx)(`div`,{className:`absolute top-0 bottom-0 w-0.5 bg-red-400 shadow-[0_0_8px_rgba(248,113,113,0.6)]`,style:{left:`${_}%`},children:(0,G.jsx)(`div`,{className:`absolute -top-1 -left-1 w-2.5 h-2.5 bg-red-400 rounded-full`})})})]})]})]})]})}function zHe({hasPermission:e,t}){let n=co(),{showToast:r}=Gd(),[i,a]=(0,y.useState)(`active`),[o,s]=(0,y.useState)(null),{data:c}=K({queryKey:[`settings`],queryFn:Z.getSettings}),l=Pf(c?.currency||`USD`),{data:u,isLoading:d}=K({queryKey:[`batches`,i],queryFn:()=>Z.getBatches(i===`all`?void 0:i)}),f=()=>{n.invalidateQueries({queryKey:[`batches`]}),n.invalidateQueries({queryKey:[`queue`]})},p=q({mutationFn:({id:e,plateId:t})=>Z.dispatchBatch(e,t===void 0?{}:{plate_id:t,only_plate:!0}),onSuccess:e=>{f(),r(t(`queue.batchOrders.dispatched`,{name:e.name}),`success`)},onError:e=>r(e.message,`error`)}),m=q({mutationFn:e=>Z.cancelBatch(e),onSuccess:()=>{f(),s(null),r(t(`queue.batchCancelled`),`success`)},onError:e=>r(e.message,`error`)}),h=e(`queue:create`),g=e(`queue:delete_all`);return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 mb-4`,children:[(0,G.jsx)(Sl,{className:`w-5 h-5 text-cyan-700 dark:text-cyan-300`}),(0,G.jsx)(`h2`,{className:`text-base sm:text-lg font-semibold text-white`,children:t(`queue.batchOrders.title`)}),(0,G.jsx)(`div`,{className:`flex gap-1 ml-auto`,children:[`active`,`completed`,`cancelled`,`all`].map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>a(e),className:`text-xs px-2.5 py-1 rounded-full border transition-colors ${i===e?`border-bambu-green bg-bambu-green/10 text-bambu-green`:`border-bambu-dark-tertiary text-bambu-gray hover:border-bambu-gray`}`,children:t(`queue.batchOrders.filter.${e}`)},e))})]}),d?(0,G.jsx)(`div`,{className:`text-center py-12 text-bambu-gray`,children:t(`common.loading`)}):u?.length?(0,G.jsx)(`div`,{className:`space-y-4`,children:u.map(e=>(0,G.jsx)(BHe,{batch:e,currency:l,canDispatch:h,canCancel:g,isDispatching:p.isPending&&p.variables?.id===e.id,onDispatch:t=>p.mutate({id:e.id,plateId:t}),onCancel:()=>s(e),t},e.id))}):(0,G.jsxs)(Ld,{className:`p-12 text-center border-dashed`,children:[(0,G.jsx)(Sl,{className:`w-16 h-16 text-bambu-gray mx-auto mb-4 opacity-50`}),(0,G.jsx)(`h3`,{className:`text-xl font-medium text-white mb-2`,children:t(`queue.batchOrders.emptyTitle`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray max-w-md mx-auto`,children:t(`queue.batchOrders.emptyDescription`)})]}),o&&(0,G.jsx)(rf,{title:t(`queue.cancelBatchConfirmTitle`),message:t(`queue.cancelBatchConfirmMessage`),confirmText:t(`queue.cancelBatch`),variant:`warning`,onConfirm:()=>m.mutate(o.id),onCancel:()=>s(null)})]})}var o8={active:`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-300`,completed:`bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-300`,cancelled:`bg-bambu-dark-tertiary text-bambu-gray`};function BHe({batch:e,currency:t,canDispatch:n,canCancel:r,isDispatching:i,onDispatch:a,onCancel:o,t:s}){let c=e.has_targets?e.target_count:e.completed_count+e.pending_count+e.printing_count+e.failed_count,l=c>0?Math.round(e.completed_count/c*100):0,u=e.has_targets?e.remaining_count-e.dispatchable_count:0,d=e.due_date?ep(e.due_date):null,f=d!=null&&e.status===`active`&&d.getTime()<Date.now();return(0,G.jsxs)(Ld,{className:`p-4`,children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-start gap-3 mb-3`,children:[(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-wrap`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium truncate`,children:e.name}),(0,G.jsx)(`span`,{className:`text-xs px-2 py-0.5 rounded-full ${o8[e.status]??o8.cancelled}`,children:s(`queue.batchOrders.status.${e.status}`)}),!e.has_targets&&(0,G.jsx)(`span`,{className:`text-xs px-2 py-0.5 rounded-full bg-bambu-dark-tertiary text-bambu-gray`,title:s(`queue.batchOrders.noTargetsHint`),children:s(`queue.batchOrders.noTargets`)})]}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:[e.created_by_username?s(`queue.addedBy`,{name:e.created_by_username}):null,d&&(0,G.jsxs)(`span`,{className:f?`text-orange-600 dark:text-orange-400`:``,children:[e.created_by_username?` • `:``,s(`queue.batchOrders.due`,{date:d.toLocaleDateString()})]})]}),e.notes&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1 whitespace-pre-wrap`,children:e.notes})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-shrink-0`,children:[e.has_targets&&e.dispatchable_count>0&&e.status!==`cancelled`&&n&&(0,G.jsxs)(Q,{variant:`primary`,size:`sm`,onClick:()=>a(),disabled:i,children:[(0,G.jsx)(Ts,{className:`w-4 h-4 mr-1`}),s(`queue.batchOrders.dispatchRemaining`,{count:e.dispatchable_count})]}),e.status===`active`&&r&&(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:o,children:[(0,G.jsx)(Ds,{className:`w-4 h-4 mr-1`}),s(`queue.cancelBatch`)]})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mb-2`,children:[(0,G.jsx)(`div`,{className:`flex-1 h-2 bg-bambu-dark-tertiary rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full transition-all ${e.status===`completed`?`bg-bambu-green`:`bg-blue-500`}`,style:{width:`${Math.min(100,l)}%`}})}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray whitespace-nowrap tabular-nums`,children:s(`queue.batchProgress`,{completed:e.completed_count,total:c})})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-x-4 gap-y-1 text-xs text-bambu-gray mb-1`,children:[e.printing_count>0&&(0,G.jsx)(`span`,{children:s(`queue.batchOrders.printing`,{count:e.printing_count})}),e.pending_count>0&&(0,G.jsx)(`span`,{children:s(`queue.batch.pendingCount`,{count:e.pending_count})}),e.failed_count>0&&(0,G.jsxs)(`span`,{className:`text-orange-600 dark:text-orange-400 flex items-center gap-1`,children:[(0,G.jsx)(Iu,{className:`w-3 h-3`}),s(`queue.batchOrders.failed`,{count:e.failed_count})]}),e.has_targets&&e.remaining_count>0&&(0,G.jsx)(`span`,{children:s(`queue.batchOrders.remaining`,{count:e.remaining_count})}),e.print_time_seconds>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(js,{className:`w-3 h-3`}),op(e.print_time_seconds)]}),e.actual_cost!=null&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(Ls,{className:`w-3 h-3`}),(0,G.jsx)(`span`,{children:s(`queue.batchOrders.costSoFar`,{amount:`${t} ${e.actual_cost.toFixed(2)}`})}),e.estimated_remaining_cost!=null&&e.estimated_remaining_cost>0&&(0,G.jsx)(`span`,{children:s(`queue.batchOrders.costRemaining`,{amount:`${t} ${e.estimated_remaining_cost.toFixed(2)}`})})]})]}),u>0&&e.status!==`cancelled`&&(0,G.jsxs)(`p`,{className:`flex items-start gap-1.5 text-xs text-orange-600 dark:text-orange-400 mb-1`,children:[(0,G.jsx)(Iu,{className:`w-3 h-3 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`span`,{children:s(`queue.batchOrders.strandedNotice`,{runs:u,owed:e.remaining_count})})]}),e.has_targets&&e.plates.length>0&&(0,G.jsx)(`div`,{className:`mt-3 border-t border-bambu-dark-tertiary pt-3 space-y-1.5`,children:e.plates.map(r=>(0,G.jsx)(VHe,{plate:r,batchStatus:e.status,currency:t,canDispatch:n,isDispatching:i,onDispatch:()=>a(r.plate_id),t:s},`${r.plate_id??`file`}`))})]})}function VHe({plate:e,batchStatus:t,currency:n,canDispatch:r,isDispatching:i,onDispatch:a,t:o}){let s=e.plate_name||(e.plate_id==null?o(`queue.batchOrders.wholeFile`):o(`queue.plateNumber`,{index:e.plate_id}));return(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-x-3 gap-y-1 text-xs`,children:[(0,G.jsx)(qc,{className:`w-3.5 h-3.5 text-bambu-gray flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-white min-w-0 truncate`,children:s}),(0,G.jsx)(`span`,{className:`text-bambu-gray tabular-nums`,children:o(`queue.batchOrders.plateProgress`,{completed:e.completed_count,target:e.quantity_target})}),e.failed_count>0&&(0,G.jsx)(`span`,{className:`text-orange-600 dark:text-orange-400`,children:o(`queue.batchOrders.failed`,{count:e.failed_count})}),e.actual_cost!=null&&(0,G.jsx)(`span`,{className:`text-bambu-gray tabular-nums`,children:`${n} ${e.actual_cost.toFixed(2)}`}),e.remaining>0&&t!==`cancelled`&&(0,G.jsxs)(`span`,{className:`ml-auto flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:o(`queue.batchOrders.remaining`,{count:e.remaining})}),e.can_dispatch?r&&(0,G.jsx)(`button`,{type:`button`,onClick:a,disabled:i,className:`text-bambu-green hover:underline disabled:opacity-50`,children:o(`queue.batchOrders.dispatchPlate`)}):(0,G.jsx)(`span`,{className:`text-orange-600 dark:text-orange-400`,children:o(`queue.batchOrders.strandedPlate`)})]})]})}function s8(e,t=!1){return t&&e>=1e3?`${(e/1e3).toFixed(1)}kg`:`${Math.round(e)}g`}function HHe({status:e,waitingReason:t,printerState:n,t:r}){if(e===`pending`&&t)return(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1.5 px-2.5 py-1 rounded-full text-xs font-medium border text-purple-700 dark:text-purple-400 bg-purple-50 dark:bg-purple-400/10 border-purple-200 dark:border-purple-400/20`,children:[(0,G.jsx)(js,{className:`w-3.5 h-3.5`}),r(`queue.status.waiting`)]});if(e===`printing`&&n===`PAUSE`)return(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1.5 px-2.5 py-1 rounded-full text-xs font-medium border text-yellow-700 dark:text-yellow-400 bg-yellow-50 dark:bg-yellow-400/10 border-yellow-200 dark:border-yellow-400/20`,children:[(0,G.jsx)(El,{className:`w-3.5 h-3.5`}),r(`queue.status.paused`)]});let{icon:i,color:a,label:o}={pending:{icon:js,color:`text-status-warning bg-status-warning/10 border-status-warning/20`,label:r(`queue.status.pending`)},printing:{icon:Ml,color:`text-blue-700 dark:text-blue-400 bg-blue-50 dark:bg-blue-400/10 border-blue-200 dark:border-blue-400/20`,label:r(`queue.status.printing`)},completed:{icon:xs,color:`text-status-ok bg-status-ok/10 border-status-ok/20`,label:r(`queue.status.completed`)},failed:{icon:Ds,color:`text-status-error bg-status-error/10 border-status-error/20`,label:r(`queue.status.failed`)},skipped:{icon:uu,color:`text-orange-700 dark:text-orange-400 bg-orange-50 dark:bg-orange-400/10 border-orange-200 dark:border-orange-400/20`,label:r(`queue.status.skipped`)},cancelled:{icon:td,color:`text-gray-400 bg-gray-400/10 border-gray-400/20`,label:r(`queue.status.cancelled`)}}[e];return(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1.5 px-2.5 py-1 rounded-full text-xs font-medium border ${a}`,children:[(0,G.jsx)(i,{className:`w-3.5 h-3.5`}),o]})}function UHe({selectedCount:e,printers:t,onSave:n,onClose:r,isSaving:i,canControlPrinter:a,hasGcodeSnippets:o,t:s}){let[c,l]=(0,y.useState)(`unchanged`),[u,d]=(0,y.useState)(`unchanged`),[f,p]=(0,y.useState)(`unchanged`),[m,h]=(0,y.useState)(`unchanged`),[g,_]=(0,y.useState)(`unchanged`),[v,b]=(0,y.useState)(`unchanged`),[x,S]=(0,y.useState)(`unchanged`),[C,w]=(0,y.useState)(`unchanged`),[T,E]=(0,y.useState)(`unchanged`),[D,O]=(0,y.useState)(`unchanged`),[k,A]=(0,y.useState)(`unchanged`),[j,M]=(0,y.useState)(`unchanged`),N=t.some(e=>e.nozzle_count===2),P=()=>{let e={};c!==`unchanged`&&(e.printer_id=c),u!==`unchanged`&&(e.manual_start=u),f!==`unchanged`&&(e.auto_off_after=f),m!==`unchanged`&&(e.require_previous_success=m),g!==`unchanged`&&(e.gcode_injection=g),v!==`unchanged`&&(e.bed_levelling=v),x!==`unchanged`&&(e.flow_cali=x),C!==`unchanged`&&(e.vibration_cali=C),T!==`unchanged`&&(e.layer_inspect=T),D!==`unchanged`&&(e.timelapse=D),k!==`unchanged`&&(e.use_ams=k),j!==`unchanged`&&(e.nozzle_offset_cali=j),n(e)},F=c!==`unchanged`||u!==`unchanged`||f!==`unchanged`||m!==`unchanged`||v!==`unchanged`||x!==`unchanged`||C!==`unchanged`||T!==`unchanged`||D!==`unchanged`||k!==`unchanged`||j!==`unchanged`||g!==`unchanged`;return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center p-4 bg-black/50 backdrop-blur-sm`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-lg max-h-[90vh] overflow-y-auto`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:s(`queue.bulkEdit.title`,{count:e})}),(0,G.jsx)(`button`,{onClick:r,className:`p-1 hover:bg-bambu-dark rounded`,children:(0,G.jsx)(td,{className:`w-5 h-5 text-bambu-gray`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:s(`queue.bulkEdit.description`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:s(`queue.bulkEdit.printer`)}),(0,G.jsxs)(`select`,{value:c===null?`null`:c===`unchanged`?`unchanged`:String(c),onChange:e=>{let t=e.target.value;l(t===`unchanged`?`unchanged`:t===`null`?null:Number(t))},className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`unchanged`,children:s(`queue.bulkEdit.noChange`)}),(0,G.jsx)(`option`,{value:`null`,children:s(`queue.filter.unassigned`)}),t.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:s(`queue.bulkEdit.queueOptions`)}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(c8,{label:s(`queue.bulkEdit.staged`),value:u,onChange:d,t:s}),(0,G.jsx)(c8,{label:s(`queue.bulkEdit.autoPowerOff`),value:f,onChange:p,disabled:!a,t:s}),(0,G.jsx)(c8,{label:s(`queue.bulkEdit.requirePrevious`),value:m,onChange:h,t:s}),o&&(0,G.jsx)(c8,{label:s(`queue.bulkEdit.gcodeInjection`),value:g,onChange:_,t:s})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:s(`queue.bulkEdit.printOptions`)}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(l8,{label:s(`queue.bulkEdit.bedLevelling`),value:v,onChange:b,t:s}),(0,G.jsx)(l8,{label:s(`queue.bulkEdit.flowCalibration`),value:x,onChange:S,t:s}),(0,G.jsx)(c8,{label:s(`queue.bulkEdit.vibrationCalibration`),value:C,onChange:w,t:s}),(0,G.jsx)(c8,{label:s(`queue.bulkEdit.layerInspection`),value:T,onChange:E,t:s}),(0,G.jsx)(c8,{label:s(`queue.bulkEdit.timelapse`),value:D,onChange:O,t:s}),(0,G.jsx)(c8,{label:s(`queue.bulkEdit.useAms`),value:k,onChange:A,t:s}),N&&(0,G.jsx)(l8,{label:s(`queue.bulkEdit.nozzleOffsetCali`),value:j,onChange:M,t:s})]})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-3 p-4 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:r,children:s(`common.cancel`)}),(0,G.jsx)(Q,{onClick:P,disabled:!F||i,children:s(i?`common.saving`:`queue.bulkEdit.applyChanges`)})]})]})})}function c8({label:e,value:t,onChange:n,disabled:r,t:i}){return(0,G.jsxs)(`div`,{className:`flex items-center justify-between py-1 ${r?`opacity-50`:``}`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 bg-bambu-dark rounded-lg p-0.5`,children:[(0,G.jsx)(`button`,{onClick:()=>n(`unchanged`),disabled:r,className:`px-2 py-1 text-xs rounded ${t===`unchanged`?`bg-bambu-dark-tertiary text-white`:`text-bambu-gray hover:text-white`} disabled:cursor-not-allowed`,children:`—`}),(0,G.jsx)(`button`,{onClick:()=>n(!1),disabled:r,className:`px-2 py-1 text-xs rounded ${t===!1?`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`:`text-bambu-gray hover:text-white`} disabled:cursor-not-allowed`,children:i(`common.off`)}),(0,G.jsx)(`button`,{onClick:()=>n(!0),disabled:r,className:`px-2 py-1 text-xs rounded ${t===!0?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:text-white`} disabled:cursor-not-allowed`,children:i(`common.on`)})]})]})}function l8({label:e,value:t,onChange:n,t:r}){let i=[{key:`unchanged`,label:`—`,active:`bg-bambu-dark-tertiary text-white`},{key:`off`,label:r(`settings.calibrationMode_off`),active:`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`},{key:`auto`,label:r(`settings.calibrationMode_auto`),active:`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`},{key:`on`,label:r(`settings.calibrationMode_on`),active:`bg-bambu-green/20 text-bambu-green`}];return(0,G.jsxs)(`div`,{className:`flex items-center justify-between py-1`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e}),(0,G.jsx)(`div`,{className:`flex items-center gap-1 bg-bambu-dark rounded-lg p-0.5`,children:i.map(({key:e,label:r,active:i})=>(0,G.jsx)(`button`,{onClick:()=>n(e),className:`px-2 py-1 text-xs rounded ${t===e?i:`text-bambu-gray hover:text-white`}`,children:r},e))})]})}function u8({item:e,position:t,onEdit:n,onCancel:r,onRemove:i,onStop:a,onRequeue:o,onStart:s,onMoveUp:c,onMoveDown:l,timeFormat:u=`system`,isSelected:d=!1,onToggleSelect:f,hasPermission:p,canModify:m,printerState:h,showEta:g=!1,etaNow:_,t:v}){let{data:y}=K({queryKey:[`printerStatus`,e.printer_id],queryFn:()=>Z.getPrinterStatus(e.printer_id),refetchInterval:3e4,enabled:e.printer_id!=null&&h===`printing`}),b=!!e.library_file_id&&!e.archive_id,{data:x}=K({queryKey:[`archive-plates`,e.archive_id],queryFn:()=>Z.getArchivePlates(e.archive_id),enabled:!!e.archive_id&&!b&&!e.archive_deleted}),{data:S}=K({queryKey:[`library-file-plates`,e.library_file_id],queryFn:()=>Z.getLibraryFilePlates(e.library_file_id),enabled:b&&!!e.library_file_id}),C=b?S:x,w=C?.plates??[],T=p(`queue:reorder`),{attributes:E,listeners:D,setNodeRef:O,transform:k,transition:A,isDragging:j}=G6({id:e.id,disabled:e.status!==`pending`||!T}),M={transform:C3.Transform.toString(k),transition:A},N=e.status===`printing`,P=e.status===`pending`,F=[`completed`,`failed`,`skipped`,`cancelled`].includes(e.status),I=P&&g&&e.print_time_seconds!=null&&e.print_time_seconds>0?ap(e.print_time_seconds/60,u,v,_):null,L=P&&f;return(0,G.jsxs)(`div`,{ref:O,style:M,className:`
+  `},ZBe={onDragStart(e){let{active:t}=e;return`Picked up draggable item `+t.id+`.`},onDragOver(e){let{active:t,over:n}=e;return n?`Draggable item `+t.id+` was moved over droppable area `+n.id+`.`:`Draggable item `+t.id+` is no longer over a droppable area.`},onDragEnd(e){let{active:t,over:n}=e;return n?`Draggable item `+t.id+` was dropped over droppable area `+n.id:`Draggable item `+t.id+` was dropped.`},onDragCancel(e){let{active:t}=e;return`Dragging was cancelled. Draggable item `+t.id+` was dropped.`}};function QBe(e){let{announcements:t=ZBe,container:n,hiddenTextDescribedById:r,screenReaderInstructions:i=XBe}=e,{announce:a,announcement:o}=qBe(),s=b3(`DndLiveRegion`),[c,l]=(0,y.useState)(!1);if((0,y.useEffect)(()=>{l(!0)},[]),JBe((0,y.useMemo)(()=>({onDragStart(e){let{active:n}=e;a(t.onDragStart({active:n}))},onDragMove(e){let{active:n,over:r}=e;t.onDragMove&&a(t.onDragMove({active:n,over:r}))},onDragOver(e){let{active:n,over:r}=e;a(t.onDragOver({active:n,over:r}))},onDragEnd(e){let{active:n,over:r}=e;a(t.onDragEnd({active:n,over:r}))},onDragCancel(e){let{active:n,over:r}=e;a(t.onDragCancel({active:n,over:r}))}}),[a,t])),!c)return null;let u=y.createElement(y.Fragment,null,y.createElement(GBe,{id:r,value:i.draggable}),y.createElement(KBe,{id:s,announcement:o}));return n?(0,At.createPortal)(u,n):u}var k3;(function(e){e.DragStart=`dragStart`,e.DragMove=`dragMove`,e.DragEnd=`dragEnd`,e.DragCancel=`dragCancel`,e.DragOver=`dragOver`,e.RegisterDroppable=`registerDroppable`,e.SetDroppableDisabled=`setDroppableDisabled`,e.UnregisterDroppable=`unregisterDroppable`})(k3||={});function A3(){}function j3(e,t){return(0,y.useMemo)(()=>({sensor:e,options:t??{}}),[e,t])}function M3(){var e=[...arguments];return(0,y.useMemo)(()=>[...e].filter(e=>e!=null),[...e])}var N3=Object.freeze({x:0,y:0});function P3(e,t){return Math.sqrt((e.x-t.x)**2+(e.y-t.y)**2)}function $Be(e,t){let n=T3(e);if(!n)return`0 0`;let r={x:(n.x-t.left)/t.width*100,y:(n.y-t.top)/t.height*100};return r.x+`% `+r.y+`%`}function F3(e,t){let{data:{value:n}}=e,{data:{value:r}}=t;return n-r}function eVe(e,t){let{data:{value:n}}=e,{data:{value:r}}=t;return r-n}function I3(e){let{left:t,top:n,height:r,width:i}=e;return[{x:t,y:n},{x:t+i,y:n},{x:t,y:n+r},{x:t+i,y:n+r}]}function L3(e,t){if(!e||e.length===0)return null;let[n]=e;return t?n[t]:n}function R3(e,t,n){return t===void 0&&(t=e.left),n===void 0&&(n=e.top),{x:t+e.width*.5,y:n+e.height*.5}}var z3=e=>{let{collisionRect:t,droppableRects:n,droppableContainers:r}=e,i=R3(t,t.left,t.top),a=[];for(let e of r){let{id:t}=e,r=n.get(t);if(r){let n=P3(R3(r),i);a.push({id:t,data:{droppableContainer:e,value:n}})}}return a.sort(F3)},tVe=e=>{let{collisionRect:t,droppableRects:n,droppableContainers:r}=e,i=I3(t),a=[];for(let e of r){let{id:t}=e,r=n.get(t);if(r){let n=I3(r),o=i.reduce((e,t,r)=>e+P3(n[r],t),0),s=Number((o/4).toFixed(4));a.push({id:t,data:{droppableContainer:e,value:s}})}}return a.sort(F3)};function nVe(e,t){let n=Math.max(t.top,e.top),r=Math.max(t.left,e.left),i=Math.min(t.left+t.width,e.left+e.width),a=Math.min(t.top+t.height,e.top+e.height),o=i-r,s=a-n;if(r<i&&n<a){let n=t.width*t.height,r=e.width*e.height,i=o*s,a=i/(n+r-i);return Number(a.toFixed(4))}return 0}var rVe=e=>{let{collisionRect:t,droppableRects:n,droppableContainers:r}=e,i=[];for(let e of r){let{id:r}=e,a=n.get(r);if(a){let n=nVe(a,t);n>0&&i.push({id:r,data:{droppableContainer:e,value:n}})}}return i.sort(eVe)};function iVe(e,t,n){return{...e,scaleX:t&&n?t.width/n.width:1,scaleY:t&&n?t.height/n.height:1}}function B3(e,t){return e&&t?{x:e.left-t.left,y:e.top-t.top}:N3}function aVe(e){return function(t){return[...arguments].slice(1).reduce((t,n)=>({...t,top:t.top+e*n.y,bottom:t.bottom+e*n.y,left:t.left+e*n.x,right:t.right+e*n.x}),{...t})}}var oVe=aVe(1);function V3(e){if(e.startsWith(`matrix3d(`)){let t=e.slice(9,-1).split(/, /);return{x:+t[12],y:+t[13],scaleX:+t[0],scaleY:+t[5]}}else if(e.startsWith(`matrix(`)){let t=e.slice(7,-1).split(/, /);return{x:+t[4],y:+t[5],scaleX:+t[0],scaleY:+t[3]}}return null}function sVe(e,t,n){let r=V3(t);if(!r)return e;let{scaleX:i,scaleY:a,x:o,y:s}=r,c=e.left-o-(1-i)*parseFloat(n),l=e.top-s-(1-a)*parseFloat(n.slice(n.indexOf(` `)+1)),u=i?e.width/i:e.width,d=a?e.height/a:e.height;return{width:u,height:d,top:l,right:c+u,bottom:l+d,left:c}}var cVe={ignoreTransform:!1};function H3(e,t){t===void 0&&(t=cVe);let n=e.getBoundingClientRect();if(t.ignoreTransform){let{transform:t,transformOrigin:r}=c3(e).getComputedStyle(e);t&&(n=sVe(n,t,r))}let{top:r,left:i,width:a,height:o,bottom:s,right:c}=n;return{top:r,left:i,width:a,height:o,bottom:s,right:c}}function U3(e){return H3(e,{ignoreTransform:!0})}function lVe(e){let t=e.innerWidth,n=e.innerHeight;return{top:0,left:0,right:t,bottom:n,width:t,height:n}}function uVe(e,t){return t===void 0&&(t=c3(e).getComputedStyle(e)),t.position===`fixed`}function dVe(e,t){t===void 0&&(t=c3(e).getComputedStyle(e));let n=/(auto|scroll|overlay)/;return[`overflow`,`overflowX`,`overflowY`].some(e=>{let r=t[e];return typeof r==`string`?n.test(r):!1})}function W3(e,t){let n=[];function r(i){if(t!=null&&n.length>=t||!i)return n;if(l3(i)&&i.scrollingElement!=null&&!n.includes(i.scrollingElement))return n.push(i.scrollingElement),n;if(!u3(i)||d3(i)||n.includes(i))return n;let a=c3(e).getComputedStyle(i);return i!==e&&dVe(i,a)&&n.push(i),uVe(i,a)?n:r(i.parentNode)}return e?r(e):n}function G3(e){let[t]=W3(e,1);return t??null}function K3(e){return!a3||!e?null:o3(e)?e:s3(e)?l3(e)||e===f3(e).scrollingElement?window:u3(e)?e:null:null}function q3(e){return o3(e)?e.scrollX:e.scrollLeft}function J3(e){return o3(e)?e.scrollY:e.scrollTop}function Y3(e){return{x:q3(e),y:J3(e)}}var X3;(function(e){e[e.Forward=1]=`Forward`,e[e.Backward=-1]=`Backward`})(X3||={});function Z3(e){return!a3||!e?!1:e===document.scrollingElement}function Q3(e){let t={x:0,y:0},n=Z3(e)?{height:window.innerHeight,width:window.innerWidth}:{height:e.clientHeight,width:e.clientWidth},r={x:e.scrollWidth-n.width,y:e.scrollHeight-n.height};return{isTop:e.scrollTop<=t.y,isLeft:e.scrollLeft<=t.x,isBottom:e.scrollTop>=r.y,isRight:e.scrollLeft>=r.x,maxScroll:r,minScroll:t}}var fVe={x:.2,y:.2};function pVe(e,t,n,r,i){let{top:a,left:o,right:s,bottom:c}=n;r===void 0&&(r=10),i===void 0&&(i=fVe);let{isTop:l,isBottom:u,isLeft:d,isRight:f}=Q3(e),p={x:0,y:0},m={x:0,y:0},h={height:t.height*i.y,width:t.width*i.x};return!l&&a<=t.top+h.height?(p.y=X3.Backward,m.y=r*Math.abs((t.top+h.height-a)/h.height)):!u&&c>=t.bottom-h.height&&(p.y=X3.Forward,m.y=r*Math.abs((t.bottom-h.height-c)/h.height)),!f&&s>=t.right-h.width?(p.x=X3.Forward,m.x=r*Math.abs((t.right-h.width-s)/h.width)):!d&&o<=t.left+h.width&&(p.x=X3.Backward,m.x=r*Math.abs((t.left+h.width-o)/h.width)),{direction:p,speed:m}}function mVe(e){if(e===document.scrollingElement){let{innerWidth:e,innerHeight:t}=window;return{top:0,left:0,right:e,bottom:t,width:e,height:t}}let{top:t,left:n,right:r,bottom:i}=e.getBoundingClientRect();return{top:t,left:n,right:r,bottom:i,width:e.clientWidth,height:e.clientHeight}}function $3(e){return e.reduce((e,t)=>S3(e,Y3(t)),N3)}function hVe(e){return e.reduce((e,t)=>e+q3(t),0)}function gVe(e){return e.reduce((e,t)=>e+J3(t),0)}function e6(e,t){if(t===void 0&&(t=H3),!e)return;let{top:n,left:r,bottom:i,right:a}=t(e);G3(e)&&(i<=0||a<=0||n>=window.innerHeight||r>=window.innerWidth)&&e.scrollIntoView({block:`center`,inline:`center`})}var _Ve=[[`x`,[`left`,`right`],hVe],[`y`,[`top`,`bottom`],gVe]],t6=class{constructor(e,t){this.rect=void 0,this.width=void 0,this.height=void 0,this.top=void 0,this.bottom=void 0,this.right=void 0,this.left=void 0;let n=W3(t),r=$3(n);this.rect={...e},this.width=e.width,this.height=e.height;for(let[e,t,i]of _Ve)for(let a of t)Object.defineProperty(this,a,{get:()=>{let t=i(n),o=r[e]-t;return this.rect[a]+o},enumerable:!0});Object.defineProperty(this,"rect",{enumerable:!1})}},n6=class{constructor(e){this.target=void 0,this.listeners=[],this.removeAll=()=>{this.listeners.forEach(e=>this.target?.removeEventListener(...e))},this.target=e}add(e,t,n){var r;(r=this.target)==null||r.addEventListener(e,t,n),this.listeners.push([e,t,n])}};function vVe(e){let{EventTarget:t}=c3(e);return e instanceof t?e:f3(e)}function r6(e,t){let n=Math.abs(e.x),r=Math.abs(e.y);return typeof t==`number`?Math.sqrt(n**2+r**2)>t:`x`in t&&`y`in t?n>t.x&&r>t.y:`x`in t?n>t.x:`y`in t?r>t.y:!1}var i6;(function(e){e.Click=`click`,e.DragStart=`dragstart`,e.Keydown=`keydown`,e.ContextMenu=`contextmenu`,e.Resize=`resize`,e.SelectionChange=`selectionchange`,e.VisibilityChange=`visibilitychange`})(i6||={});function a6(e){e.preventDefault()}function yVe(e){e.stopPropagation()}var o6;(function(e){e.Space=`Space`,e.Down=`ArrowDown`,e.Right=`ArrowRight`,e.Left=`ArrowLeft`,e.Up=`ArrowUp`,e.Esc=`Escape`,e.Enter=`Enter`,e.Tab=`Tab`})(o6||={});var s6={start:[o6.Space,o6.Enter],cancel:[o6.Esc],end:[o6.Space,o6.Enter,o6.Tab]},bVe=(e,t)=>{let{currentCoordinates:n}=t;switch(e.code){case o6.Right:return{...n,x:n.x+25};case o6.Left:return{...n,x:n.x-25};case o6.Down:return{...n,y:n.y+25};case o6.Up:return{...n,y:n.y-25}}},c6=class{constructor(e){this.props=void 0,this.autoScrollEnabled=!1,this.referenceCoordinates=void 0,this.listeners=void 0,this.windowListeners=void 0,this.props=e;let{event:{target:t}}=e;this.props=e,this.listeners=new n6(f3(t)),this.windowListeners=new n6(c3(t)),this.handleKeyDown=this.handleKeyDown.bind(this),this.handleCancel=this.handleCancel.bind(this),this.attach()}attach(){this.handleStart(),this.windowListeners.add(i6.Resize,this.handleCancel),this.windowListeners.add(i6.VisibilityChange,this.handleCancel),setTimeout(()=>this.listeners.add(i6.Keydown,this.handleKeyDown))}handleStart(){let{activeNode:e,onStart:t}=this.props,n=e.node.current;n&&e6(n),t(N3)}handleKeyDown(e){if(w3(e)){let{active:t,context:n,options:r}=this.props,{keyboardCodes:i=s6,coordinateGetter:a=bVe,scrollBehavior:o=`smooth`}=r,{code:s}=e;if(i.end.includes(s)){this.handleEnd(e);return}if(i.cancel.includes(s)){this.handleCancel(e);return}let{collisionRect:c}=n.current,l=c?{x:c.left,y:c.top}:N3;this.referenceCoordinates||=l;let u=a(e,{active:t,context:n.current,currentCoordinates:l});if(u){let t=C3(u,l),r={x:0,y:0},{scrollableAncestors:i}=n.current;for(let n of i){let i=e.code,{isTop:a,isRight:s,isLeft:c,isBottom:l,maxScroll:d,minScroll:f}=Q3(n),p=mVe(n),m={x:Math.min(i===o6.Right?p.right-p.width/2:p.right,Math.max(i===o6.Right?p.left:p.left+p.width/2,u.x)),y:Math.min(i===o6.Down?p.bottom-p.height/2:p.bottom,Math.max(i===o6.Down?p.top:p.top+p.height/2,u.y))},h=i===o6.Right&&!s||i===o6.Left&&!c,g=i===o6.Down&&!l||i===o6.Up&&!a;if(h&&m.x!==u.x){let e=n.scrollLeft+t.x,a=i===o6.Right&&e<=d.x||i===o6.Left&&e>=f.x;if(a&&!t.y){n.scrollTo({left:e,behavior:o});return}a?r.x=n.scrollLeft-e:r.x=i===o6.Right?n.scrollLeft-d.x:n.scrollLeft-f.x,r.x&&n.scrollBy({left:-r.x,behavior:o});break}else if(g&&m.y!==u.y){let e=n.scrollTop+t.y,a=i===o6.Down&&e<=d.y||i===o6.Up&&e>=f.y;if(a&&!t.x){n.scrollTo({top:e,behavior:o});return}a?r.y=n.scrollTop-e:r.y=i===o6.Down?n.scrollTop-d.y:n.scrollTop-f.y,r.y&&n.scrollBy({top:-r.y,behavior:o});break}}this.handleMove(e,S3(C3(u,this.referenceCoordinates),r))}}}handleMove(e,t){let{onMove:n}=this.props;e.preventDefault(),n(t)}handleEnd(e){let{onEnd:t}=this.props;e.preventDefault(),this.detach(),t()}handleCancel(e){let{onCancel:t}=this.props;e.preventDefault(),this.detach(),t()}detach(){this.listeners.removeAll(),this.windowListeners.removeAll()}};c6.activators=[{eventName:`onKeyDown`,handler:(e,t,n)=>{let{keyboardCodes:r=s6,onActivation:i}=t,{active:a}=n,{code:o}=e.nativeEvent;if(r.start.includes(o)){let t=a.activatorNode.current;return t&&e.target!==t?!1:(e.preventDefault(),i?.({event:e.nativeEvent}),!0)}return!1}}];function l6(e){return!!(e&&`distance`in e)}function u6(e){return!!(e&&`delay`in e)}var d6=class{constructor(e,t,n){n===void 0&&(n=vVe(e.event.target)),this.props=void 0,this.events=void 0,this.autoScrollEnabled=!0,this.document=void 0,this.activated=!1,this.initialCoordinates=void 0,this.timeoutId=null,this.listeners=void 0,this.documentListeners=void 0,this.windowListeners=void 0,this.props=e,this.events=t;let{event:r}=e,{target:i}=r;this.props=e,this.events=t,this.document=f3(i),this.documentListeners=new n6(this.document),this.listeners=new n6(n),this.windowListeners=new n6(c3(i)),this.initialCoordinates=T3(r)??N3,this.handleStart=this.handleStart.bind(this),this.handleMove=this.handleMove.bind(this),this.handleEnd=this.handleEnd.bind(this),this.handleCancel=this.handleCancel.bind(this),this.handleKeydown=this.handleKeydown.bind(this),this.removeTextSelection=this.removeTextSelection.bind(this),this.attach()}attach(){let{events:e,props:{options:{activationConstraint:t,bypassActivationConstraint:n}}}=this;if(this.listeners.add(e.move.name,this.handleMove,{passive:!1}),this.listeners.add(e.end.name,this.handleEnd),e.cancel&&this.listeners.add(e.cancel.name,this.handleCancel),this.windowListeners.add(i6.Resize,this.handleCancel),this.windowListeners.add(i6.DragStart,a6),this.windowListeners.add(i6.VisibilityChange,this.handleCancel),this.windowListeners.add(i6.ContextMenu,a6),this.documentListeners.add(i6.Keydown,this.handleKeydown),t){if(n!=null&&n({event:this.props.event,activeNode:this.props.activeNode,options:this.props.options}))return this.handleStart();if(u6(t)){this.timeoutId=setTimeout(this.handleStart,t.delay),this.handlePending(t);return}if(l6(t)){this.handlePending(t);return}}this.handleStart()}detach(){this.listeners.removeAll(),this.windowListeners.removeAll(),setTimeout(this.documentListeners.removeAll,50),this.timeoutId!==null&&(clearTimeout(this.timeoutId),this.timeoutId=null)}handlePending(e,t){let{active:n,onPending:r}=this.props;r(n,e,this.initialCoordinates,t)}handleStart(){let{initialCoordinates:e}=this,{onStart:t}=this.props;e&&(this.activated=!0,this.documentListeners.add(i6.Click,yVe,{capture:!0}),this.removeTextSelection(),this.documentListeners.add(i6.SelectionChange,this.removeTextSelection),t(e))}handleMove(e){let{activated:t,initialCoordinates:n,props:r}=this,{onMove:i,options:{activationConstraint:a}}=r;if(!n)return;let o=T3(e)??N3,s=C3(n,o);if(!t&&a){if(l6(a)){if(a.tolerance!=null&&r6(s,a.tolerance))return this.handleCancel();if(r6(s,a.distance))return this.handleStart()}if(u6(a)&&r6(s,a.tolerance))return this.handleCancel();this.handlePending(a,s);return}e.cancelable&&e.preventDefault(),i(o)}handleEnd(){let{onAbort:e,onEnd:t}=this.props;this.detach(),this.activated||e(this.props.active),t()}handleCancel(){let{onAbort:e,onCancel:t}=this.props;this.detach(),this.activated||e(this.props.active),t()}handleKeydown(e){e.code===o6.Esc&&this.handleCancel()}removeTextSelection(){var e;(e=this.document.getSelection())==null||e.removeAllRanges()}},xVe={cancel:{name:`pointercancel`},move:{name:`pointermove`},end:{name:`pointerup`}},f6=class extends d6{constructor(e){let{event:t}=e,n=f3(t.target);super(e,xVe,n)}};f6.activators=[{eventName:`onPointerDown`,handler:(e,t)=>{let{nativeEvent:n}=e,{onActivation:r}=t;return!n.isPrimary||n.button!==0?!1:(r?.({event:n}),!0)}}];var SVe={move:{name:`mousemove`},end:{name:`mouseup`}},p6;(function(e){e[e.RightClick=2]=`RightClick`})(p6||={});var CVe=class extends d6{constructor(e){super(e,SVe,f3(e.event.target))}};CVe.activators=[{eventName:`onMouseDown`,handler:(e,t)=>{let{nativeEvent:n}=e,{onActivation:r}=t;return n.button===p6.RightClick?!1:(r?.({event:n}),!0)}}];var m6={cancel:{name:`touchcancel`},move:{name:`touchmove`},end:{name:`touchend`}},wVe=class extends d6{constructor(e){super(e,m6)}static setup(){return window.addEventListener(m6.move.name,e,{capture:!1,passive:!1}),function(){window.removeEventListener(m6.move.name,e)};function e(){}}};wVe.activators=[{eventName:`onTouchStart`,handler:(e,t)=>{let{nativeEvent:n}=e,{onActivation:r}=t,{touches:i}=n;return i.length>1?!1:(r?.({event:n}),!0)}}];var h6;(function(e){e[e.Pointer=0]=`Pointer`,e[e.DraggableRect=1]=`DraggableRect`})(h6||={});var g6;(function(e){e[e.TreeOrder=0]=`TreeOrder`,e[e.ReversedTreeOrder=1]=`ReversedTreeOrder`})(g6||={});function TVe(e){let{acceleration:t,activator:n=h6.Pointer,canScroll:r,draggingRect:i,enabled:a,interval:o=5,order:s=g6.TreeOrder,pointerCoordinates:c,scrollableAncestors:l,scrollableAncestorRects:u,delta:d,threshold:f}=e,p=DVe({delta:d,disabled:!a}),[m,h]=BBe(),g=(0,y.useRef)({x:0,y:0}),_=(0,y.useRef)({x:0,y:0}),v=(0,y.useMemo)(()=>{switch(n){case h6.Pointer:return c?{top:c.y,bottom:c.y,left:c.x,right:c.x}:null;case h6.DraggableRect:return i}},[n,i,c]),b=(0,y.useRef)(null),x=(0,y.useCallback)(()=>{let e=b.current;if(!e)return;let t=g.current.x*_.current.x,n=g.current.y*_.current.y;e.scrollBy(t,n)},[]),S=(0,y.useMemo)(()=>s===g6.TreeOrder?[...l].reverse():l,[s,l]);(0,y.useEffect)(()=>{if(!a||!l.length||!v){h();return}for(let e of S){if(r?.(e)===!1)continue;let n=u[l.indexOf(e)];if(!n)continue;let{direction:i,speed:a}=pVe(e,n,v,t,f);for(let e of[`x`,`y`])p[e][i[e]]||(a[e]=0,i[e]=0);if(a.x>0||a.y>0){h(),b.current=e,m(x,o),g.current=a,_.current=i;return}}g.current={x:0,y:0},_.current={x:0,y:0},h()},[t,x,r,h,a,o,JSON.stringify(v),JSON.stringify(p),m,l,S,u,JSON.stringify(f)])}var EVe={x:{[X3.Backward]:!1,[X3.Forward]:!1},y:{[X3.Backward]:!1,[X3.Forward]:!1}};function DVe(e){let{delta:t,disabled:n}=e,r=v3(t);return g3(e=>{if(n||!r||!e)return EVe;let i={x:Math.sign(t.x-r.x),y:Math.sign(t.y-r.y)};return{x:{[X3.Backward]:e.x[X3.Backward]||i.x===-1,[X3.Forward]:e.x[X3.Forward]||i.x===1},y:{[X3.Backward]:e.y[X3.Backward]||i.y===-1,[X3.Forward]:e.y[X3.Forward]||i.y===1}}},[n,t,r])}function OVe(e,t){let n=t==null?void 0:e.get(t),r=n?n.node.current:null;return g3(e=>t==null?null:r??e??null,[r,t])}function kVe(e,t){return(0,y.useMemo)(()=>e.reduce((e,n)=>{let{sensor:r}=n,i=r.activators.map(e=>({eventName:e.eventName,handler:t(e.handler,n)}));return[...e,...i]},[]),[e,t])}var _6;(function(e){e[e.Always=0]=`Always`,e[e.BeforeDragging=1]=`BeforeDragging`,e[e.WhileDragging=2]=`WhileDragging`})(_6||={});var v6;(function(e){e.Optimized=`optimized`})(v6||={});var y6=new Map;function AVe(e,t){let{dragging:n,dependencies:r,config:i}=t,[a,o]=(0,y.useState)(null),{frequency:s,measure:c,strategy:l}=i,u=(0,y.useRef)(e),d=g(),f=h3(d),p=(0,y.useCallback)(function(e){e===void 0&&(e=[]),!f.current&&o(t=>t===null?e:t.concat(e.filter(e=>!t.includes(e))))},[f]),m=(0,y.useRef)(null),h=g3(t=>{if(d&&!n)return y6;if(!t||t===y6||u.current!==e||a!=null){let t=new Map;for(let n of e){if(!n)continue;if(a&&a.length>0&&!a.includes(n.id)&&n.rect.current){t.set(n.id,n.rect.current);continue}let e=n.node.current,r=e?new t6(c(e),e):null;n.rect.current=r,r&&t.set(n.id,r)}return t}return t},[e,a,n,d,c]);return(0,y.useEffect)(()=>{u.current=e},[e]),(0,y.useEffect)(()=>{d||p()},[n,d]),(0,y.useEffect)(()=>{a&&a.length>0&&o(null)},[JSON.stringify(a)]),(0,y.useEffect)(()=>{d||typeof s!=`number`||m.current!==null||(m.current=setTimeout(()=>{p(),m.current=null},s))},[s,d,p,...r]),{droppableRects:h,measureDroppableContainers:p,measuringScheduled:a!=null};function g(){switch(l){case _6.Always:return!1;case _6.BeforeDragging:return n;default:return!n}}}function b6(e,t){return g3(n=>e?n||(typeof t==`function`?t(e):e):null,[t,e])}function jVe(e,t){return b6(e,t)}function MVe(e){let{callback:t,disabled:n}=e,r=m3(t),i=(0,y.useMemo)(()=>{if(n||typeof window>`u`||window.MutationObserver===void 0)return;let{MutationObserver:e}=window;return new e(r)},[r,n]);return(0,y.useEffect)(()=>()=>i?.disconnect(),[i]),i}function x6(e){let{callback:t,disabled:n}=e,r=m3(t),i=(0,y.useMemo)(()=>{if(n||typeof window>`u`||window.ResizeObserver===void 0)return;let{ResizeObserver:e}=window;return new e(r)},[n]);return(0,y.useEffect)(()=>()=>i?.disconnect(),[i]),i}function NVe(e){return new t6(H3(e),e)}function S6(e,t,n){t===void 0&&(t=NVe);let[r,i]=(0,y.useState)(null);function a(){i(r=>{if(!e)return null;if(e.isConnected===!1)return r??n??null;let i=t(e);return JSON.stringify(r)===JSON.stringify(i)?r:i})}let o=MVe({callback(t){if(e)for(let n of t){let{type:t,target:r}=n;if(t===`childList`&&r instanceof HTMLElement&&r.contains(e)){a();break}}}}),s=x6({callback:a});return p3(()=>{a(),e?(s?.observe(e),o?.observe(document.body,{childList:!0,subtree:!0})):(s?.disconnect(),o?.disconnect())},[e]),r}function PVe(e){return B3(e,b6(e))}var C6=[];function FVe(e){let t=(0,y.useRef)(e),n=g3(n=>e?n&&n!==C6&&e&&t.current&&e.parentNode===t.current.parentNode?n:W3(e):C6,[e]);return(0,y.useEffect)(()=>{t.current=e},[e]),n}function IVe(e){let[t,n]=(0,y.useState)(null),r=(0,y.useRef)(e),i=(0,y.useCallback)(e=>{let t=K3(e.target);t&&n(e=>e?(e.set(t,Y3(t)),new Map(e)):null)},[]);return(0,y.useEffect)(()=>{let t=r.current;if(e!==t){a(t);let o=e.map(e=>{let t=K3(e);return t?(t.addEventListener(`scroll`,i,{passive:!0}),[t,Y3(t)]):null}).filter(e=>e!=null);n(o.length?new Map(o):null),r.current=e}return()=>{a(e),a(t)};function a(e){e.forEach(e=>{K3(e)?.removeEventListener(`scroll`,i)})}},[i,e]),(0,y.useMemo)(()=>e.length?t?Array.from(t.values()).reduce((e,t)=>S3(e,t),N3):$3(e):N3,[e,t])}function w6(e,t){t===void 0&&(t=[]);let n=(0,y.useRef)(null);return(0,y.useEffect)(()=>{n.current=null},t),(0,y.useEffect)(()=>{let t=e!==N3;t&&!n.current&&(n.current=e),!t&&n.current&&(n.current=null)},[e]),n.current?C3(e,n.current):N3}function LVe(e){(0,y.useEffect)(()=>{if(!a3)return;let t=e.map(e=>{let{sensor:t}=e;return t.setup==null?void 0:t.setup()});return()=>{for(let e of t)e?.()}},e.map(e=>{let{sensor:t}=e;return t}))}function RVe(e,t){return(0,y.useMemo)(()=>e.reduce((e,n)=>{let{eventName:r,handler:i}=n;return e[r]=e=>{i(e,t)},e},{}),[e,t])}function T6(e){return(0,y.useMemo)(()=>e?lVe(e):null,[e])}var E6=[];function zVe(e,t){t===void 0&&(t=H3);let[n]=e,r=T6(n?c3(n):null),[i,a]=(0,y.useState)(E6);function o(){a(()=>e.length?e.map(e=>Z3(e)?r:new t6(t(e),e)):E6)}let s=x6({callback:o});return p3(()=>{s?.disconnect(),o(),e.forEach(e=>s?.observe(e))},[e]),i}function D6(e){if(!e)return null;if(e.children.length>1)return e;let t=e.children[0];return u3(t)?t:e}function BVe(e){let{measure:t}=e,[n,r]=(0,y.useState)(null),i=x6({callback:(0,y.useCallback)(e=>{for(let{target:n}of e)if(u3(n)){r(e=>{let r=t(n);return e?{...e,width:r.width,height:r.height}:r});break}},[t])}),[a,o]=_3((0,y.useCallback)(e=>{let n=D6(e);i?.disconnect(),n&&i?.observe(n),r(n?t(n):null)},[t,i]));return(0,y.useMemo)(()=>({nodeRef:a,rect:n,setRef:o}),[n,a,o])}var VVe=[{sensor:f6,options:{}},{sensor:c6,options:{}}],HVe={current:{}},O6={draggable:{measure:U3},droppable:{measure:U3,strategy:_6.WhileDragging,frequency:v6.Optimized},dragOverlay:{measure:H3}},k6=class extends Map{get(e){return e==null?void 0:super.get(e)??void 0}toArray(){return Array.from(this.values())}getEnabled(){return this.toArray().filter(e=>{let{disabled:t}=e;return!t})}getNodeFor(e){return this.get(e)?.node.current??void 0}},UVe={activatorEvent:null,active:null,activeNode:null,activeNodeRect:null,collisions:null,containerNodeRect:null,draggableNodes:new Map,droppableRects:new Map,droppableContainers:new k6,over:null,dragOverlay:{nodeRef:{current:null},rect:null,setRef:A3},scrollableAncestors:[],scrollableAncestorRects:[],measuringConfiguration:O6,measureDroppableContainers:A3,windowRect:null,measuringScheduled:!1},A6={activatorEvent:null,activators:[],active:null,activeNodeRect:null,ariaDescribedById:{draggable:``},dispatch:A3,draggableNodes:new Map,over:null,measureDroppableContainers:A3},j6=(0,y.createContext)(A6),M6=(0,y.createContext)(UVe);function WVe(){return{draggable:{active:null,initialCoordinates:{x:0,y:0},nodes:new Map,translate:{x:0,y:0}},droppable:{containers:new k6}}}function GVe(e,t){switch(t.type){case k3.DragStart:return{...e,draggable:{...e.draggable,initialCoordinates:t.initialCoordinates,active:t.active}};case k3.DragMove:return e.draggable.active==null?e:{...e,draggable:{...e.draggable,translate:{x:t.coordinates.x-e.draggable.initialCoordinates.x,y:t.coordinates.y-e.draggable.initialCoordinates.y}}};case k3.DragEnd:case k3.DragCancel:return{...e,draggable:{...e.draggable,active:null,initialCoordinates:{x:0,y:0},translate:{x:0,y:0}}};case k3.RegisterDroppable:{let{element:n}=t,{id:r}=n,i=new k6(e.droppable.containers);return i.set(r,n),{...e,droppable:{...e.droppable,containers:i}}}case k3.SetDroppableDisabled:{let{id:n,key:r,disabled:i}=t,a=e.droppable.containers.get(n);if(!a||r!==a.key)return e;let o=new k6(e.droppable.containers);return o.set(n,{...a,disabled:i}),{...e,droppable:{...e.droppable,containers:o}}}case k3.UnregisterDroppable:{let{id:n,key:r}=t,i=e.droppable.containers.get(n);if(!i||r!==i.key)return e;let a=new k6(e.droppable.containers);return a.delete(n),{...e,droppable:{...e.droppable,containers:a}}}default:return e}}function KVe(e){let{disabled:t}=e,{active:n,activatorEvent:r,draggableNodes:i}=(0,y.useContext)(j6),a=v3(r),o=v3(n?.id);return(0,y.useEffect)(()=>{if(!t&&!r&&a&&o!=null){if(!w3(a)||document.activeElement===a.target)return;let e=i.get(o);if(!e)return;let{activatorNode:t,node:n}=e;if(!t.current&&!n.current)return;requestAnimationFrame(()=>{for(let e of[t.current,n.current]){if(!e)continue;let t=UBe(e);if(t){t.focus();break}}})}},[r,t,i,o,a]),null}function N6(e,t){let{transform:n,...r}=t;return e!=null&&e.length?e.reduce((e,t)=>t({transform:e,...r}),n):n}function qVe(e){return(0,y.useMemo)(()=>({draggable:{...O6.draggable,...e?.draggable},droppable:{...O6.droppable,...e?.droppable},dragOverlay:{...O6.dragOverlay,...e?.dragOverlay}}),[e?.draggable,e?.droppable,e?.dragOverlay])}function JVe(e){let{activeNode:t,measure:n,initialRect:r,config:i=!0}=e,a=(0,y.useRef)(!1),{x:o,y:s}=typeof i==`boolean`?{x:i,y:i}:i;p3(()=>{if(!o&&!s||!t){a.current=!1;return}if(a.current||!r)return;let e=t?.node.current;if(!e||e.isConnected===!1)return;let i=B3(n(e),r);if(o||(i.x=0),s||(i.y=0),a.current=!0,Math.abs(i.x)>0||Math.abs(i.y)>0){let t=G3(e);t&&t.scrollBy({top:i.y,left:i.x})}},[t,o,s,r,n])}var P6=(0,y.createContext)({...N3,scaleX:1,scaleY:1}),F6;(function(e){e[e.Uninitialized=0]=`Uninitialized`,e[e.Initializing=1]=`Initializing`,e[e.Initialized=2]=`Initialized`})(F6||={});var I6=(0,y.memo)(function(e){let{id:t,accessibility:n,autoScroll:r=!0,children:i,sensors:a=VVe,collisionDetection:o=rVe,measuring:s,modifiers:c,...l}=e,[u,d]=(0,y.useReducer)(GVe,void 0,WVe),[f,p]=YBe(),[m,h]=(0,y.useState)(F6.Uninitialized),g=m===F6.Initialized,{draggable:{active:_,nodes:v,translate:b},droppable:{containers:x}}=u,S=_==null?null:v.get(_),C=(0,y.useRef)({initial:null,translated:null}),w=(0,y.useMemo)(()=>_==null?null:{id:_,data:S?.data??HVe,rect:C},[_,S]),T=(0,y.useRef)(null),[E,D]=(0,y.useState)(null),[O,k]=(0,y.useState)(null),A=h3(l,Object.values(l)),j=b3(`DndDescribedBy`,t),M=(0,y.useMemo)(()=>x.getEnabled(),[x]),N=qVe(s),{droppableRects:P,measureDroppableContainers:F,measuringScheduled:I}=AVe(M,{dragging:g,dependencies:[b.x,b.y],config:N.droppable}),L=OVe(v,_),R=(0,y.useMemo)(()=>O?T3(O):null,[O]),z=De(),B=jVe(L,N.draggable.measure);JVe({activeNode:_==null?null:v.get(_),config:z.layoutShiftCompensation,initialRect:B,measure:N.draggable.measure});let V=S6(L,N.draggable.measure,B),ee=S6(L?L.parentElement:null),te=(0,y.useRef)({activatorEvent:null,active:null,activeNode:L,collisionRect:null,collisions:null,droppableRects:P,draggableNodes:v,draggingNode:null,draggingNodeRect:null,droppableContainers:x,over:null,scrollableAncestors:[],scrollAdjustedTranslate:null}),ne=x.getNodeFor(te.current.over?.id),re=BVe({measure:N.dragOverlay.measure}),ie=re.nodeRef.current??L,ae=g?re.rect??V:null,oe=!!(re.nodeRef.current&&re.rect),se=PVe(oe?null:V),H=T6(ie?c3(ie):null),ce=FVe(g?ne??L:null),le=zVe(ce),ue=N6(c,{transform:{x:b.x-se.x,y:b.y-se.y,scaleX:1,scaleY:1},activatorEvent:O,active:w,activeNodeRect:V,containerNodeRect:ee,draggingNodeRect:ae,over:te.current.over,overlayNodeRect:re.rect,scrollableAncestors:ce,scrollableAncestorRects:le,windowRect:H}),de=R?S3(R,b):null,fe=IVe(ce),pe=w6(fe),me=w6(fe,[V]),he=S3(ue,pe),ge=ae?oVe(ae,ue):null,_e=w&&ge?o({active:w,collisionRect:ge,droppableRects:P,droppableContainers:M,pointerCoordinates:de}):null,ve=L3(_e,`id`),[ye,be]=(0,y.useState)(null),xe=iVe(oe?ue:S3(ue,me),ye?.rect??null,V),Se=(0,y.useRef)(null),Ce=(0,y.useCallback)((e,t)=>{let{sensor:n,options:r}=t;if(T.current==null)return;let i=v.get(T.current);if(!i)return;let a=e.nativeEvent;Se.current=new n({active:T.current,activeNode:i,event:a,options:r,context:te,onAbort(e){if(!v.get(e))return;let{onDragAbort:t}=A.current,n={id:e};t?.(n),f({type:`onDragAbort`,event:n})},onPending(e,t,n,r){if(!v.get(e))return;let{onDragPending:i}=A.current,a={id:e,constraint:t,initialCoordinates:n,offset:r};i?.(a),f({type:`onDragPending`,event:a})},onStart(e){let t=T.current;if(t==null)return;let n=v.get(t);if(!n)return;let{onDragStart:r}=A.current,i={activatorEvent:a,active:{id:t,data:n.data,rect:C}};(0,At.unstable_batchedUpdates)(()=>{r?.(i),h(F6.Initializing),d({type:k3.DragStart,initialCoordinates:e,active:t}),f({type:`onDragStart`,event:i}),D(Se.current),k(a)})},onMove(e){d({type:k3.DragMove,coordinates:e})},onEnd:o(k3.DragEnd),onCancel:o(k3.DragCancel)});function o(e){return async function(){let{active:t,collisions:n,over:r,scrollAdjustedTranslate:i}=te.current,o=null;if(t&&i){let{cancelDrop:s}=A.current;o={activatorEvent:a,active:t,collisions:n,delta:i,over:r},e===k3.DragEnd&&typeof s==`function`&&await Promise.resolve(s(o))&&(e=k3.DragCancel)}T.current=null,(0,At.unstable_batchedUpdates)(()=>{d({type:e}),h(F6.Uninitialized),be(null),D(null),k(null),Se.current=null;let t=e===k3.DragEnd?`onDragEnd`:`onDragCancel`;if(o){let e=A.current[t];e?.(o),f({type:t,event:o})}})}}},[v]),we=kVe(a,(0,y.useCallback)((e,t)=>(n,r)=>{let i=n.nativeEvent,a=v.get(r);if(T.current!==null||!a||i.dndKit||i.defaultPrevented)return;let o={active:a};e(n,t.options,o)===!0&&(i.dndKit={capturedBy:t.sensor},T.current=r,Ce(n,t))},[v,Ce]));LVe(a),p3(()=>{V&&m===F6.Initializing&&h(F6.Initialized)},[V,m]),(0,y.useEffect)(()=>{let{onDragMove:e}=A.current,{active:t,activatorEvent:n,collisions:r,over:i}=te.current;if(!t||!n)return;let a={active:t,activatorEvent:n,collisions:r,delta:{x:he.x,y:he.y},over:i};(0,At.unstable_batchedUpdates)(()=>{e?.(a),f({type:`onDragMove`,event:a})})},[he.x,he.y]),(0,y.useEffect)(()=>{let{active:e,activatorEvent:t,collisions:n,droppableContainers:r,scrollAdjustedTranslate:i}=te.current;if(!e||T.current==null||!t||!i)return;let{onDragOver:a}=A.current,o=r.get(ve),s=o&&o.rect.current?{id:o.id,rect:o.rect.current,data:o.data,disabled:o.disabled}:null,c={active:e,activatorEvent:t,collisions:n,delta:{x:i.x,y:i.y},over:s};(0,At.unstable_batchedUpdates)(()=>{be(s),a?.(c),f({type:`onDragOver`,event:c})})},[ve]),p3(()=>{te.current={activatorEvent:O,active:w,activeNode:L,collisionRect:ge,collisions:_e,droppableRects:P,draggableNodes:v,draggingNode:ie,draggingNodeRect:ae,droppableContainers:x,over:ye,scrollableAncestors:ce,scrollAdjustedTranslate:he},C.current={initial:ae,translated:ge}},[w,L,_e,ge,v,ie,ae,P,x,ye,ce,he]),TVe({...z,delta:b,draggingRect:ge,pointerCoordinates:de,scrollableAncestors:ce,scrollableAncestorRects:le});let Te=(0,y.useMemo)(()=>({active:w,activeNode:L,activeNodeRect:V,activatorEvent:O,collisions:_e,containerNodeRect:ee,dragOverlay:re,draggableNodes:v,droppableContainers:x,droppableRects:P,over:ye,measureDroppableContainers:F,scrollableAncestors:ce,scrollableAncestorRects:le,measuringConfiguration:N,measuringScheduled:I,windowRect:H}),[w,L,V,O,_e,ee,re,v,x,P,ye,F,ce,le,N,I,H]),Ee=(0,y.useMemo)(()=>({activatorEvent:O,activators:we,active:w,activeNodeRect:V,ariaDescribedById:{draggable:j},dispatch:d,draggableNodes:v,over:ye,measureDroppableContainers:F}),[O,we,w,V,d,j,v,ye,F]);return y.createElement(O3.Provider,{value:p},y.createElement(j6.Provider,{value:Ee},y.createElement(M6.Provider,{value:Te},y.createElement(P6.Provider,{value:xe},i)),y.createElement(KVe,{disabled:n?.restoreFocus===!1})),y.createElement(QBe,{...n,hiddenTextDescribedById:j}));function De(){let e=E?.autoScrollEnabled===!1,t=typeof r==`object`?r.enabled===!1:r===!1,n=g&&!e&&!t;return typeof r==`object`?{...r,enabled:n}:{enabled:n}}}),YVe=(0,y.createContext)(null),L6=`button`,XVe=`Draggable`;function ZVe(e){let{id:t,data:n,disabled:r=!1,attributes:i}=e,a=b3(XVe),{activators:o,activatorEvent:s,active:c,activeNodeRect:l,ariaDescribedById:u,draggableNodes:d,over:f}=(0,y.useContext)(j6),{role:p=L6,roleDescription:m=`draggable`,tabIndex:h=0}=i??{},g=c?.id===t,_=(0,y.useContext)(g?P6:YVe),[v,b]=_3(),[x,S]=_3(),C=RVe(o,t),w=h3(n);return p3(()=>(d.set(t,{id:t,key:a,node:v,activatorNode:x,data:w}),()=>{let e=d.get(t);e&&e.key===a&&d.delete(t)}),[d,t]),{active:c,activatorEvent:s,activeNodeRect:l,attributes:(0,y.useMemo)(()=>({role:p,tabIndex:h,"aria-disabled":r,"aria-pressed":g&&p===L6?!0:void 0,"aria-roledescription":m,"aria-describedby":u.draggable}),[r,p,h,g,m,u.draggable]),isDragging:g,listeners:r?void 0:C,node:v,over:f,setNodeRef:b,setActivatorNodeRef:S,transform:_}}function R6(){return(0,y.useContext)(M6)}var QVe=`Droppable`,$Ve={timeout:25};function eHe(e){let{data:t,disabled:n=!1,id:r,resizeObserverConfig:i}=e,a=b3(QVe),{active:o,dispatch:s,over:c,measureDroppableContainers:l}=(0,y.useContext)(j6),u=(0,y.useRef)({disabled:n}),d=(0,y.useRef)(!1),f=(0,y.useRef)(null),p=(0,y.useRef)(null),{disabled:m,updateMeasurementsFor:h,timeout:g}={...$Ve,...i},_=h3(h??r),v=x6({callback:(0,y.useCallback)(()=>{if(!d.current){d.current=!0;return}p.current!=null&&clearTimeout(p.current),p.current=setTimeout(()=>{l(Array.isArray(_.current)?_.current:[_.current]),p.current=null},g)},[g]),disabled:m||!o}),[b,x]=_3((0,y.useCallback)((e,t)=>{v&&(t&&(v.unobserve(t),d.current=!1),e&&v.observe(e))},[v])),S=h3(t);return(0,y.useEffect)(()=>{!v||!b.current||(v.disconnect(),d.current=!1,v.observe(b.current))},[b,v]),(0,y.useEffect)(()=>(s({type:k3.RegisterDroppable,element:{id:r,key:a,disabled:n,node:b,rect:f,data:S}}),()=>s({type:k3.UnregisterDroppable,key:a,id:r})),[r]),(0,y.useEffect)(()=>{n!==u.current.disabled&&(s({type:k3.SetDroppableDisabled,id:r,key:a,disabled:n}),u.current.disabled=n)},[r,a,n,s]),{active:o,rect:f,isOver:c?.id===r,node:b,over:c,setNodeRef:x}}function tHe(e){let{animation:t,children:n}=e,[r,i]=(0,y.useState)(null),[a,o]=(0,y.useState)(null),s=v3(n);return!n&&!r&&s&&i(s),p3(()=>{if(!a)return;let e=r?.key,n=r?.props.id;if(e==null||n==null){i(null);return}Promise.resolve(t(n,a)).then(()=>{i(null)})},[t,r,a]),y.createElement(y.Fragment,null,n,r?(0,y.cloneElement)(r,{ref:o}):null)}var nHe={x:0,y:0,scaleX:1,scaleY:1};function rHe(e){let{children:t}=e;return y.createElement(j6.Provider,{value:A6},y.createElement(P6.Provider,{value:nHe},t))}var iHe={position:`fixed`,touchAction:`none`},aHe=e=>w3(e)?`transform 250ms ease`:void 0,oHe=(0,y.forwardRef)((e,t)=>{let{as:n,activatorEvent:r,adjustScale:i,children:a,className:o,rect:s,style:c,transform:l,transition:u=aHe}=e;if(!s)return null;let d=i?l:{...l,scaleX:1,scaleY:1},f={...iHe,width:s.width,height:s.height,top:s.top,left:s.left,transform:E3.Transform.toString(d),transformOrigin:i&&r?$Be(r,s):void 0,transition:typeof u==`function`?u(r):u,...c};return y.createElement(n,{className:o,style:f,ref:t},a)}),sHe={duration:250,easing:`ease`,keyframes:e=>{let{transform:{initial:t,final:n}}=e;return[{transform:E3.Transform.toString(t)},{transform:E3.Transform.toString(n)}]},sideEffects:(e=>t=>{let{active:n,dragOverlay:r}=t,i={},{styles:a,className:o}=e;if(a!=null&&a.active)for(let[e,t]of Object.entries(a.active))t!==void 0&&(i[e]=n.node.style.getPropertyValue(e),n.node.style.setProperty(e,t));if(a!=null&&a.dragOverlay)for(let[e,t]of Object.entries(a.dragOverlay))t!==void 0&&r.node.style.setProperty(e,t);return o!=null&&o.active&&n.node.classList.add(o.active),o!=null&&o.dragOverlay&&r.node.classList.add(o.dragOverlay),function(){for(let[e,t]of Object.entries(i))n.node.style.setProperty(e,t);o!=null&&o.active&&n.node.classList.remove(o.active)}})({styles:{active:{opacity:`0`}}})};function cHe(e){let{config:t,draggableNodes:n,droppableContainers:r,measuringConfiguration:i}=e;return m3((e,a)=>{if(t===null)return;let o=n.get(e);if(!o)return;let s=o.node.current;if(!s)return;let c=D6(a);if(!c)return;let{transform:l}=c3(a).getComputedStyle(a),u=V3(l);if(!u)return;let d=typeof t==`function`?t:lHe(t);return e6(s,i.draggable.measure),d({active:{id:e,data:o.data,node:s,rect:i.draggable.measure(s)},draggableNodes:n,dragOverlay:{node:a,rect:i.dragOverlay.measure(c)},droppableContainers:r,measuringConfiguration:i,transform:u})})}function lHe(e){let{duration:t,easing:n,sideEffects:r,keyframes:i}={...sHe,...e};return e=>{let{active:a,dragOverlay:o,transform:s,...c}=e;if(!t)return;let l={x:o.rect.left-a.rect.left,y:o.rect.top-a.rect.top},u={scaleX:s.scaleX===1?1:a.rect.width*s.scaleX/o.rect.width,scaleY:s.scaleY===1?1:a.rect.height*s.scaleY/o.rect.height},d={x:s.x-l.x,y:s.y-l.y,...u},f=i({...c,active:a,dragOverlay:o,transform:{initial:s,final:d}}),[p]=f,m=f[f.length-1];if(JSON.stringify(p)===JSON.stringify(m))return;let h=r?.({active:a,dragOverlay:o,...c}),g=o.node.animate(f,{duration:t,easing:n,fill:`forwards`});return new Promise(e=>{g.onfinish=()=>{h?.(),e()}})}}var z6=0;function uHe(e){return(0,y.useMemo)(()=>{if(e!=null)return z6++,z6},[e])}var dHe=y.memo(e=>{let{adjustScale:t=!1,children:n,dropAnimation:r,style:i,transition:a,modifiers:o,wrapperElement:s=`div`,className:c,zIndex:l=999}=e,{activatorEvent:u,active:d,activeNodeRect:f,containerNodeRect:p,draggableNodes:m,droppableContainers:h,dragOverlay:g,over:_,measuringConfiguration:v,scrollableAncestors:b,scrollableAncestorRects:x,windowRect:S}=R6(),C=(0,y.useContext)(P6),w=uHe(d?.id),T=N6(o,{activatorEvent:u,active:d,activeNodeRect:f,containerNodeRect:p,draggingNodeRect:g.rect,over:_,overlayNodeRect:g.rect,scrollableAncestors:b,scrollableAncestorRects:x,transform:C,windowRect:S}),E=b6(f),D=cHe({config:r,draggableNodes:m,droppableContainers:h,measuringConfiguration:v}),O=E?g.setRef:void 0;return y.createElement(rHe,null,y.createElement(tHe,{animation:D},d&&w?y.createElement(oHe,{key:w,id:d.id,ref:O,as:s,activatorEvent:u,adjustScale:t,className:c,transition:a,rect:E,style:{zIndex:l,...i},transform:T},n):null))});function B6(e,t,n){let r=e.slice();return r.splice(n<0?r.length+n:n,0,r.splice(t,1)[0]),r}function fHe(e,t){return e.reduce((e,n,r)=>{let i=t.get(n);return i&&(e[r]=i),e},Array(e.length))}function V6(e){return e!==null&&e>=0}function pHe(e,t){if(e===t)return!0;if(e.length!==t.length)return!1;for(let n=0;n<e.length;n++)if(e[n]!==t[n])return!1;return!0}function mHe(e){return typeof e==`boolean`?{draggable:e,droppable:e}:e}var H6=e=>{let{rects:t,activeIndex:n,overIndex:r,index:i}=e,a=B6(t,r,n),o=t[i],s=a[i];return!s||!o?null:{x:s.left-o.left,y:s.top-o.top,scaleX:s.width/o.width,scaleY:s.height/o.height}},U6={scaleX:1,scaleY:1},hHe=e=>{let{activeIndex:t,activeNodeRect:n,index:r,rects:i,overIndex:a}=e,o=i[t]??n;if(!o)return null;if(r===t){let e=i[a];return e?{x:0,y:t<a?e.top+e.height-(o.top+o.height):e.top-o.top,...U6}:null}let s=gHe(i,r,t);return r>t&&r<=a?{x:0,y:-o.height-s,...U6}:r<t&&r>=a?{x:0,y:o.height+s,...U6}:{x:0,y:0,...U6}};function gHe(e,t,n){let r=e[t],i=e[t-1],a=e[t+1];return r?n<t?i?r.top-(i.top+i.height):a?a.top-(r.top+r.height):0:a?a.top-(r.top+r.height):i?r.top-(i.top+i.height):0:0}var W6=`Sortable`,G6=y.createContext({activeIndex:-1,containerId:W6,disableTransforms:!1,items:[],overIndex:-1,useDragOverlay:!1,sortedRects:[],strategy:H6,disabled:{draggable:!1,droppable:!1}});function K6(e){let{children:t,id:n,items:r,strategy:i=H6,disabled:a=!1}=e,{active:o,dragOverlay:s,droppableRects:c,over:l,measureDroppableContainers:u}=R6(),d=b3(W6,n),f=s.rect!==null,p=(0,y.useMemo)(()=>r.map(e=>typeof e==`object`&&`id`in e?e.id:e),[r]),m=o!=null,h=o?p.indexOf(o.id):-1,g=l?p.indexOf(l.id):-1,_=(0,y.useRef)(p),v=!pHe(p,_.current),b=g!==-1&&h===-1||v,x=mHe(a);p3(()=>{v&&m&&u(p)},[v,p,m,u]),(0,y.useEffect)(()=>{_.current=p},[p]);let S=(0,y.useMemo)(()=>({activeIndex:h,containerId:d,disabled:x,disableTransforms:b,items:p,overIndex:g,useDragOverlay:f,sortedRects:fHe(p,c),strategy:i}),[h,d,x.draggable,x.droppable,b,p,g,c,f,i]);return y.createElement(G6.Provider,{value:S},t)}var _He=e=>{let{id:t,items:n,activeIndex:r,overIndex:i}=e;return B6(n,r,i).indexOf(t)},vHe=e=>{let{containerId:t,isSorting:n,wasDragging:r,index:i,items:a,newIndex:o,previousItems:s,previousContainerId:c,transition:l}=e;return!l||!r||s!==a&&i===o?!1:n?!0:o!==i&&t===c},yHe={duration:200,easing:`ease`},q6=`transform`,bHe=E3.Transition.toString({property:q6,duration:0,easing:`linear`}),xHe={roleDescription:`sortable`};function SHe(e){let{disabled:t,index:n,node:r,rect:i}=e,[a,o]=(0,y.useState)(null),s=(0,y.useRef)(n);return p3(()=>{if(!t&&n!==s.current&&r.current){let e=i.current;if(e){let t=H3(r.current,{ignoreTransform:!0}),n={x:e.left-t.left,y:e.top-t.top,scaleX:e.width/t.width,scaleY:e.height/t.height};(n.x||n.y)&&o(n)}}n!==s.current&&(s.current=n)},[t,n,r,i]),(0,y.useEffect)(()=>{a&&o(null)},[a]),a}function J6(e){let{animateLayoutChanges:t=vHe,attributes:n,disabled:r,data:i,getNewIndex:a=_He,id:o,strategy:s,resizeObserverConfig:c,transition:l=yHe}=e,{items:u,containerId:d,activeIndex:f,disabled:p,disableTransforms:m,sortedRects:h,overIndex:g,useDragOverlay:_,strategy:v}=(0,y.useContext)(G6),b=CHe(r,p),x=u.indexOf(o),S=(0,y.useMemo)(()=>({sortable:{containerId:d,index:x,items:u},...i}),[d,i,x,u]),C=(0,y.useMemo)(()=>u.slice(u.indexOf(o)),[u,o]),{rect:w,node:T,isOver:E,setNodeRef:D}=eHe({id:o,data:S,disabled:b.droppable,resizeObserverConfig:{updateMeasurementsFor:C,...c}}),{active:O,activatorEvent:k,activeNodeRect:A,attributes:j,setNodeRef:M,listeners:N,isDragging:P,over:F,setActivatorNodeRef:I,transform:L}=ZVe({id:o,data:S,attributes:{...xHe,...n},disabled:b.draggable}),R=zBe(D,M),z=!!O,B=z&&!m&&V6(f)&&V6(g),V=!_&&P,ee=B?(V&&B?L:null)??(s??v)({rects:h,activeNodeRect:A,activeIndex:f,overIndex:g,index:x}):null,te=V6(f)&&V6(g)?a({id:o,items:u,activeIndex:f,overIndex:g}):x,ne=O?.id,re=(0,y.useRef)({activeId:ne,items:u,newIndex:te,containerId:d}),ie=u!==re.current.items,ae=t({active:O,containerId:d,isDragging:P,isSorting:z,id:o,index:x,items:u,newIndex:re.current.newIndex,previousItems:re.current.items,previousContainerId:re.current.containerId,transition:l,wasDragging:re.current.activeId!=null}),oe=SHe({disabled:!ae,index:x,node:T,rect:w});return(0,y.useEffect)(()=>{z&&re.current.newIndex!==te&&(re.current.newIndex=te),d!==re.current.containerId&&(re.current.containerId=d),u!==re.current.items&&(re.current.items=u)},[z,te,d,u]),(0,y.useEffect)(()=>{if(ne===re.current.activeId)return;if(ne!=null&&re.current.activeId==null){re.current.activeId=ne;return}let e=setTimeout(()=>{re.current.activeId=ne},50);return()=>clearTimeout(e)},[ne]),{active:O,activeIndex:f,attributes:j,data:S,rect:w,index:x,newIndex:te,items:u,isOver:E,isSorting:z,isDragging:P,listeners:N,node:T,overIndex:g,over:F,setNodeRef:R,setActivatorNodeRef:I,setDroppableNodeRef:D,setDraggableNodeRef:M,transform:oe??ee,transition:se()};function se(){if(oe||ie&&re.current.newIndex===x)return bHe;if(!(V&&!w3(k)||!l)&&(z||ae))return E3.Transition.toString({...l,property:q6})}}function CHe(e,t){return typeof e==`boolean`?{draggable:e,droppable:!1}:{draggable:e?.draggable??t.draggable,droppable:e?.droppable??t.droppable}}function Y6(e){if(!e)return!1;let t=e.data.current;return!!(t&&`sortable`in t&&typeof t.sortable==`object`&&`containerId`in t.sortable&&`items`in t.sortable&&`index`in t.sortable)}var wHe=[o6.Down,o6.Right,o6.Up,o6.Left],X6=(e,t)=>{let{context:{active:n,collisionRect:r,droppableRects:i,droppableContainers:a,over:o,scrollableAncestors:s}}=t;if(wHe.includes(e.code)){if(e.preventDefault(),!n||!r)return;let t=[];a.getEnabled().forEach(n=>{if(!n||n!=null&&n.disabled)return;let a=i.get(n.id);if(a)switch(e.code){case o6.Down:r.top<a.top&&t.push(n);break;case o6.Up:r.top>a.top&&t.push(n);break;case o6.Left:r.left>a.left&&t.push(n);break;case o6.Right:r.left<a.left&&t.push(n);break}});let c=tVe({active:n,collisionRect:r,droppableRects:i,droppableContainers:t,pointerCoordinates:null}),l=L3(c,`id`);if(l===o?.id&&c.length>1&&(l=c[1].id),l!=null){let e=a.get(n.id),t=a.get(l),o=t?i.get(t.id):null,c=t?.node.current;if(c&&o&&e&&t){let n=W3(c).some((e,t)=>s[t]!==e),i=Z6(e,t),a=THe(e,t),l=n||!i?{x:0,y:0}:{x:a?r.width-o.width:0,y:a?r.height-o.height:0},u={x:o.left,y:o.top};return l.x&&l.y?u:C3(u,l)}}}};function Z6(e,t){return!Y6(e)||!Y6(t)?!1:e.data.current.sortable.containerId===t.data.current.sortable.containerId}function THe(e,t){return!Y6(e)||!Y6(t)||!Z6(e,t)?!1:e.data.current.sortable.index<t.data.current.sortable.index}var EHe=[``,`queued`,`slicing`,`dispatching`,`in_progress`,`completed`,`partial_failure`,`failed`,`cancelled`],Q6=25;function DHe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),[r,i]=(0,y.useState)(``),[a,o]=(0,y.useState)(null),[s,c]=(0,y.useState)(``),[l,u]=(0,y.useState)(0),[d,f]=(0,y.useState)(new Set),[p,m]=(0,y.useState)(!1),{data:h}=K({queryKey:[`slicer-pipelines`],queryFn:()=>Z.listSlicerPipelines()}),{data:g}=K({queryKey:[`printers`],queryFn:()=>Z.getPrinters()}),_=(g??[]).reduce((e,t)=>(e[t.id]=t,e),{}),v=s.startsWith(`p:`)?parseInt(s.slice(2),10):void 0,b=s.startsWith(`c:`)?s.slice(2):void 0,{data:x,isLoading:S}=K({queryKey:[`pipeline-runs-all`,r,a,l,s],queryFn:()=>Z.listAllPipelineRuns({limit:Q6,offset:l,pipelineId:a??void 0,status:r||void 0,targetPrinterId:v,targetModelClass:b}),refetchInterval:15e3}),C=q({mutationFn:e=>Z.cancelPipelineRun(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`pipeline-runs-all`]}),n(e(`pipelineRuns.toast.cancelled`,`Run cancelled`),`success`)},onError:t=>n(t.message||e(`pipelineRuns.toast.cancelFailed`,`Cancel failed`),`error`)}),w=q({mutationFn:e=>Z.retryFailedPipelineRun(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`pipeline-runs-all`]}),n(e(`pipelineRuns.toast.retryStarted`,`Retry started`),`success`)},onError:t=>n(t.message||e(`pipelineRuns.toast.retryFailed`,`Retry failed`),`error`)}),T=q({mutationFn:()=>Z.clearTerminalPipelineRuns(),onSuccess:r=>{t.invalidateQueries({queryKey:[`pipeline-runs-all`]}),m(!1),u(0),n(e(`pipelineRuns.toast.cleared`,`{{n}} runs cleared`,{n:r.deleted}),`success`)},onError:t=>n(t.message||e(`pipelineRuns.toast.clearFailed`,`Clear failed`),`error`)}),E=x?.runs??[],D=x?.total??0,O=(h?.pipelines??[]).reduce((e,t)=>(e[t.id]=t,e),{}),k=e=>{f(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},A=!!(r||a!==null||s),j=(()=>{let e=new Set,t=new Set;for(let n of h?.pipelines??[])n.target_kind===`printer_class`&&n.target_model_class?t.add(n.target_model_class):n.target_printer_id&&e.add(n.target_printer_id);return{printers:(g??[]).filter(t=>e.has(t.id)),classes:Array.from(t).sort()}})();return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 mb-4 text-sm`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>t.invalidateQueries({queryKey:[`pipeline-runs-all`]}),"aria-label":e(`common.refresh`,`Refresh`),title:e(`common.refresh`,`Refresh`),className:`p-1.5 text-bambu-gray hover:text-white border border-bambu-dark-tertiary rounded`,children:(0,G.jsx)(Vl,{className:`w-3.5 h-3.5`})}),(0,G.jsx)($6,{icon:(0,G.jsx)($u,{className:`w-3.5 h-3.5 text-bambu-gray`}),ariaLabel:e(`pipelineRuns.filter.pipeline`,`Pipeline`),value:a===null?``:String(a),onChange:e=>{u(0),o(e?parseInt(e,10):null)},options:[{value:``,label:e(`pipelineRuns.filter.allPipelines`,`All pipelines`)},...(h?.pipelines??[]).map(e=>({value:String(e.id),label:e.name}))]}),(0,G.jsx)($6,{icon:(0,G.jsx)(Cc,{className:`w-3.5 h-3.5 text-bambu-gray`}),ariaLabel:e(`pipelineRuns.filter.status`,`Status`),value:r,onChange:e=>{u(0),i(e)},options:EHe.map(t=>({value:t,label:t===``?e(`pipelineRuns.filter.allStatus`,`All statuses`):e(`settings.pipelines.runs.status.${t}`,t)}))}),(j.printers.length>0||j.classes.length>0)&&(0,G.jsx)($6,{icon:(0,G.jsx)(Ll,{className:`w-3.5 h-3.5 text-bambu-gray`}),ariaLabel:e(`pipelineRuns.filter.target`,`Target`),value:s,onChange:e=>{u(0),c(e)},options:[{value:``,label:e(`pipelineRuns.filter.allTargets`,`All targets`)},...j.printers.map(t=>({value:`p:${t.id}`,label:t.name,group:e(`settings.pipelines.field.targetKindSpecific`,`Specific printer`)})),...j.classes.map(t=>({value:`c:${t}`,label:e(`library.runWithPipeline.classTarget`,`Any {{model}}`,{model:t}),group:e(`settings.pipelines.field.targetKindClass`,`Printer class`)}))]}),A&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>{i(``),o(null),c(``),u(0)},className:`text-xs text-bambu-gray hover:text-white`,children:e(`pipelineRuns.filter.clear`,`Clear filters`)}),(0,G.jsxs)(`div`,{className:`ml-auto flex items-center gap-2 text-xs text-bambu-gray`,children:[!S&&D>0&&(0,G.jsx)(`span`,{children:e(`pipelineRuns.totalCount`,`{{n}} run`,{n:D,count:D})}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>m(!0),disabled:D===0,className:`flex items-center gap-1 px-2 py-1 text-red-700 dark:text-red-400 hover:bg-red-50 dark:hover:bg-red-500/10 rounded disabled:opacity-50 disabled:cursor-not-allowed`,children:[(0,G.jsx)(Nu,{className:`w-3 h-3`}),e(`pipelineRuns.clearLog`,`Clear log`)]})]})]}),p&&(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 bg-black/60 flex items-center justify-center p-4`,onClick:()=>m(!1),role:`dialog`,"aria-modal":`true`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-2xl w-full max-w-md p-4`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Nu,{className:`w-4 h-4 text-red-600 dark:text-red-400`}),e(`pipelineRuns.clearConfirmTitle`,`Clear log?`)]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-2`,children:e(`pipelineRuns.clearConfirmBody`,`Delete every completed, failed, cancelled, and partial-failure pipeline run? In-flight runs are kept. This cannot be undone.`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-2 mt-4`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>m(!1),disabled:T.isPending,className:`px-3 py-1.5 text-sm text-bambu-gray hover:text-white`,children:e(`common.cancel`,`Cancel`)}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>T.mutate(),disabled:T.isPending,className:`px-3 py-1.5 text-sm bg-red-500 hover:bg-red-600 text-white rounded disabled:opacity-50 flex items-center gap-1`,children:[T.isPending?(0,G.jsx)(Y,{className:`w-3.5 h-3.5 animate-spin`}):(0,G.jsx)(Nu,{className:`w-3.5 h-3.5`}),e(`pipelineRuns.clearConfirmAction`,`Clear`)]})]})]})}),S&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),e(`pipelineRuns.loading`,`Loading…`)]}),!S&&E.length===0&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:A?e(`pipelineRuns.filter.noMatches`,`No runs match the current filters.`):e(`pipelineRuns.empty`,`No pipeline runs yet.`)}),!S&&E.length>0&&(0,G.jsx)(`div`,{className:`space-y-1.5`,children:E.map(e=>(0,G.jsx)(OHe,{run:e,pipeline:e.pipeline_id?O[e.pipeline_id]:void 0,printersById:_,expanded:d.has(e.id),onToggle:()=>k(e.id),onCancel:()=>C.mutate(e.id),onRetry:()=>w.mutate(e.id),cancelling:C.isPending,retrying:w.isPending},e.id))}),!S&&D>Q6&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between mt-4 text-sm`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>u(Math.max(0,l-Q6)),disabled:l===0,className:`px-3 py-1.5 rounded border border-bambu-dark-tertiary disabled:opacity-50 text-bambu-gray hover:text-white`,children:e(`common.previous`,`Previous`)}),(0,G.jsx)(`span`,{className:`text-bambu-gray text-xs`,children:e(`pipelineRuns.pagination`,`{{start}}–{{end}} of {{total}}`,{start:l+1,end:Math.min(l+Q6,D),total:D})}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>u(l+Q6),disabled:l+Q6>=D,className:`px-3 py-1.5 rounded border border-bambu-dark-tertiary disabled:opacity-50 text-bambu-gray hover:text-white`,children:e(`common.next`,`Next`)})]})]})}function OHe({run:e,pipeline:t,printersById:n,expanded:r,onToggle:i,onCancel:a,onRetry:o,cancelling:s,retrying:c}){let{t:l}=U(),u=[`queued`,`slicing`,`dispatching`,`in_progress`].includes(e.status),d=e.status===`partial_failure`||e.status===`failed`,f=e.status===`cancelled`&&e.error_message===`Cancelled by user`,p=e.target_kind===`printer_class`&&e.target_model_class?l(`library.runWithPipeline.classTarget`,`Any {{model}}`,{model:e.target_model_class}):e.target_printer_id&&n[e.target_printer_id]?n[e.target_printer_id].name:null;return(0,G.jsxs)(`div`,{className:`rounded-md border border-bambu-dark-tertiary bg-bambu-dark/40 overflow-hidden`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 px-3 py-2`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:i,"aria-label":r?l(`common.collapse`,`Collapse`):l(`common.expand`,`Expand`),"aria-expanded":r,className:`text-bambu-gray hover:text-white flex-shrink-0`,children:r?(0,G.jsx)(ps,{className:`w-4 h-4`}):(0,G.jsx)(ms,{className:`w-4 h-4`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-x-2 gap-y-0.5 text-sm`,children:[(0,G.jsxs)(`span`,{className:`font-medium text-white`,children:[`#`,e.id]}),(0,G.jsx)(`span`,{className:`text-white truncate`,children:t?.name??e.pipeline_name??`—`}),(0,G.jsx)(kHe,{status:e.status}),p&&(0,G.jsxs)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-bambu-dark-tertiary text-bambu-gray flex items-center gap-1`,children:[(0,G.jsx)(Ll,{className:`w-3 h-3`}),p]}),e.parent_run_id&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray/70 italic`,children:l(`pipelineRuns.retryOf`,`retry of #{{n}}`,{n:e.parent_run_id})})]}),e.source_filename&&(0,G.jsxs)(`div`,{className:`mt-0.5 flex items-center gap-1.5 text-xs text-bambu-gray min-w-0`,children:[(0,G.jsx)(dc,{className:`w-3 h-3 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,title:e.source_filename,children:e.source_filename})]}),(0,G.jsxs)(`div`,{className:`mt-0.5 text-xs text-bambu-gray/70 flex flex-wrap items-center gap-x-2`,children:[(0,G.jsx)(`span`,{children:new Date(e.created_at).toLocaleString()}),e.copies>1&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{className:`text-bambu-gray/40`,children:`·`}),(0,G.jsx)(`span`,{children:l(`pipelineRuns.copies`,`{{n}} copies`,{n:e.copies})})]}),(e.copies_completed>0||e.copies_failed>0||e.copies_cancelled>0)&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{className:`text-bambu-gray/40`,children:`·`}),(0,G.jsxs)(`span`,{children:[(0,G.jsx)(`span`,{className:`text-bambu-green`,children:e.copies_completed}),`/`,e.copies]}),e.copies_failed>0&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{className:`text-bambu-gray/40`,children:`·`}),(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:l(`pipelineRuns.failedCount`,`{{n}} failed`,{n:e.copies_failed})})]})]})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 flex-shrink-0`,children:[u&&(0,G.jsxs)(`button`,{type:`button`,onClick:a,disabled:s,"aria-label":l(`common.cancel`,`Cancel`),className:`text-xs px-2 py-1 text-red-700 dark:text-red-400 hover:bg-red-50 dark:hover:bg-red-500/10 rounded disabled:opacity-50 flex items-center gap-1`,children:[(0,G.jsx)(td,{className:`w-3 h-3`}),l(`common.cancel`,`Cancel`)]}),d&&(0,G.jsxs)(`button`,{type:`button`,onClick:o,disabled:c,"aria-label":l(`pipelineRuns.retryFailed`,`Retry failed`),className:`text-xs px-2 py-1 text-bambu-green hover:bg-bambu-green/10 rounded disabled:opacity-50 flex items-center gap-1`,children:[(0,G.jsx)(Ul,{className:`w-3 h-3`}),l(`pipelineRuns.retryFailed`,`Retry failed`)]})]})]}),r&&(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary px-3 py-2 bg-bambu-dark/30`,children:[(0,G.jsx)(`div`,{className:`space-y-1.5`,children:e.jobs.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-xs`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray/60 w-14 flex-shrink-0`,children:l(`pipelineRuns.copyN`,`Copy {{n}}`,{n:e.copy_index+1})}),(0,G.jsx)(AHe,{status:e.status}),e.assigned_printer_name&&(0,G.jsxs)(`span`,{className:`text-bambu-gray flex items-center gap-1 truncate`,children:[(0,G.jsx)(Ll,{className:`w-3 h-3 text-bambu-gray/60`}),(0,G.jsx)(`span`,{className:`text-white truncate`,children:e.assigned_printer_name})]}),e.error_message&&(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400 truncate`,title:e.error_message,children:e.error_message})]},e.id))}),e.error_message&&!f&&(0,G.jsx)(`div`,{className:`text-xs text-red-700 dark:text-red-400 mt-2 pt-2 border-t border-bambu-dark-tertiary`,children:e.error_message}),f&&(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray/70 mt-2 pt-2 border-t border-bambu-dark-tertiary italic`,children:l(`pipelineRuns.cancelledByUser`,`Cancelled by user`)})]})]})}function kHe({status:e}){let{t}=U();return(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 rounded text-[10px] uppercase font-semibold tracking-wide whitespace-nowrap ${{queued:`bg-slate-700 text-slate-200`,slicing:`bg-sky-700 text-sky-100`,dispatching:`bg-sky-700 text-sky-100`,in_progress:`bg-emerald-700 text-emerald-100`,completed:`bg-emerald-700 text-emerald-100`,failed:`bg-red-700 text-red-100`,partial_failure:`bg-amber-700 text-amber-100`,cancelled:`bg-rose-900 text-rose-200`}[e]}`,children:t(`settings.pipelines.runs.status.${e}`,e)})}function $6({value:e,onChange:t,options:n,icon:r,ariaLabel:i}){let[a,o]=(0,y.useState)(!1),s=(0,y.useRef)(null);(0,y.useEffect)(()=>{if(!a)return;let e=e=>{s.current&&!s.current.contains(e.target)&&o(!1)},t=e=>{e.key===`Escape`&&o(!1)};return document.addEventListener(`mousedown`,e),document.addEventListener(`keydown`,t),()=>{document.removeEventListener(`mousedown`,e),document.removeEventListener(`keydown`,t)}},[a]);let c=n.find(t=>t.value===e),l=[];for(let e of n){let t=l[l.length-1];t&&t.group===e.group?t.options.push(e):l.push({group:e.group,options:[e]})}return(0,G.jsxs)(`div`,{ref:s,className:`relative`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>o(e=>!e),"aria-label":i,"aria-haspopup":`listbox`,"aria-expanded":a,className:`flex items-center gap-1.5 px-2 py-1 border border-bambu-dark-tertiary rounded bg-bambu-dark/40 text-xs text-white hover:border-bambu-gray/60 focus:outline-none focus:ring-1 focus:ring-bambu-green/40`,children:[r,(0,G.jsx)(`span`,{className:`truncate max-w-[14rem]`,children:c?.label??``}),(0,G.jsx)(ps,{className:`w-3 h-3 text-bambu-gray transition-transform ${a?`rotate-180`:``}`})]}),a&&(0,G.jsx)(`div`,{role:`listbox`,className:`absolute left-0 top-full mt-1 z-30 min-w-full max-h-72 overflow-auto rounded border border-bambu-dark-tertiary bg-bambu-dark-secondary shadow-xl py-1`,children:l.map((n,r)=>(0,G.jsxs)(`div`,{children:[n.group&&(0,G.jsx)(`div`,{className:`px-2 pt-1.5 pb-0.5 text-[10px] uppercase tracking-wider text-bambu-gray/60`,children:n.group}),n.options.map(n=>{let r=n.value===e;return(0,G.jsxs)(`button`,{type:`button`,role:`option`,"aria-selected":r,onClick:()=>{t(n.value),o(!1)},className:`flex w-full items-center gap-1.5 text-left px-2 py-1 text-xs whitespace-nowrap ${r?`bg-bambu-dark-tertiary text-white`:`text-bambu-gray hover:bg-bambu-dark-tertiary/60 hover:text-white`}`,children:[(0,G.jsx)(fs,{className:`w-3 h-3 flex-shrink-0 ${r?`opacity-100`:`opacity-0`}`}),(0,G.jsx)(`span`,{className:`truncate`,children:n.label})]},n.value)})]},r))})]})}function AHe({status:e}){let{t}=U();return(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 rounded text-[10px] uppercase font-semibold tracking-wide ${{pending:`bg-slate-700 text-slate-200`,awaiting_printer:`bg-sky-700 text-sky-100`,queued:`bg-sky-700 text-sky-100`,printing:`bg-emerald-700 text-emerald-100`,completed:`bg-emerald-700 text-emerald-100`,failed:`bg-red-700 text-red-100`,cancelled:`bg-rose-900 text-rose-200`}[e]}`,children:t(`pipelineRuns.jobStatus.${e}`,e)})}function jHe(e){return e>=1e3?`${(e/1e3).toFixed(1)}kg`:`${Math.round(e)}g`}function MHe({activeCount:e,pendingCount:t,totalTime:n,totalWeight:r,historyCount:i,t:a}){return(0,G.jsx)(`div`,{className:`flex items-center gap-3 sm:gap-5 flex-wrap px-4 py-3 bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary mb-6`,children:[{icon:Ml,value:e,label:a(`queue.summary.printing`),color:`text-blue-600 dark:text-blue-400`},{icon:js,value:t,label:a(`queue.summary.queued`),color:`text-yellow-600 dark:text-yellow-400`},{icon:Mu,value:op(n),label:a(`queue.summary.totalTime`),color:`text-bambu-green`},{icon:Yu,value:jHe(r),label:a(`queue.summary.totalWeight`),color:`text-purple-600 dark:text-purple-400`},{icon:xs,value:i,label:a(`queue.summary.history`),color:`text-bambu-gray`}].map((e,t)=>(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[t>0&&(0,G.jsx)(`span`,{className:`hidden sm:block text-bambu-dark-tertiary`,children:`|`}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(e.icon,{className:`w-4 h-4 ${e.color}`}),(0,G.jsx)(`span`,{className:`text-sm font-semibold text-white`,children:e.value}),(0,G.jsx)(`span`,{className:`text-xs sm:text-sm text-bambu-gray`,children:e.label})]})]},t))})}var e8={completed:{icon:xs,color:`text-emerald-600 dark:text-emerald-400`,border:`border-l-emerald-500`},failed:{icon:Ds,color:`text-red-600 dark:text-red-400`,border:`border-l-red-500`},skipped:{icon:uu,color:`text-orange-600 dark:text-orange-400`,border:`border-l-gray-500`},cancelled:{icon:Uo,color:`text-gray-400`,border:`border-l-gray-500`}};function NHe(e){if(!e)return null;let t=e.startsWith(`#`)?e.slice(1):e;return/^0{6,8}$/.test(t)||!/^[0-9a-fA-F]{6,8}$/.test(t)?null:`#${t.slice(0,6)}`}function t8({item:e,onRequeue:t,onRemove:n,timeFormat:r=`system`,hasPermission:i,canModify:a,t:o}){let s=e8[e.status]||e8.cancelled,c=s.icon,l=LT(e),u=e.archive_thumbnail?Z.getArchiveThumbnail(e.archive_id):e.library_file_thumbnail?Z.getLibraryFileThumbnailUrl(e.library_file_id):null,d=e.completed_at||e.created_at,f=NHe(e.filament_color),p=e.filament_used_grams?Math.round(e.filament_used_grams):null,m=!!e.error_message&&(e.status===`failed`||e.status===`skipped`);return(0,G.jsxs)(`div`,{className:`px-3 py-2 bg-bambu-dark-secondary rounded-lg border border-bambu-dark-tertiary border-l-[3px] ${s.border}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 sm:gap-3`,children:[(0,G.jsx)(c,{className:`w-4 h-4 shrink-0 ${s.color}`}),(0,G.jsxs)(`div`,{className:`relative shrink-0 history-thumb-hover`,children:[(0,G.jsx)(`div`,{className:`w-8 h-8 bg-bambu-dark rounded overflow-hidden`,children:u?(0,G.jsx)(`img`,{src:u,alt:``,className:`w-full h-full object-cover`}):(0,G.jsx)(`div`,{className:`w-full h-full flex items-center justify-center text-bambu-gray`,children:(0,G.jsx)(qc,{className:`w-4 h-4`})})}),u&&(0,G.jsx)(`div`,{className:`history-thumb-preview absolute z-[60] left-full top-0 ml-2 w-48 h-48 pointer-events-none opacity-0 transition-opacity`,children:(0,G.jsx)(`img`,{src:u,alt:``,className:`w-full h-full object-cover rounded-lg shadow-2xl border-2 border-bambu-dark-tertiary bg-bambu-dark`})})]}),(0,G.jsx)(`span`,{className:`text-sm text-white font-medium truncate min-w-0 flex-1`,children:l}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray shrink-0`,title:d??void 0,children:sp(d,r,o)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-0.5 shrink-0`,children:[(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:t,disabled:!i(`queue:create`),title:i(`queue:create`)?o(`queue.actions.requeue`):o(`queue.permissions.noRequeue`),className:`text-bambu-green hover:text-bambu-green/80 hover:bg-bambu-green/10 p-1.5`,children:(0,G.jsx)(Vl,{className:`w-3.5 h-3.5`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:n,disabled:!a(`queue`,`delete`,e.created_by_id),title:a(`queue`,`delete`,e.created_by_id)?o(`common.remove`):o(`queue.permissions.noRemove`),className:`p-1.5`,children:(0,G.jsx)(Nu,{className:`w-3.5 h-3.5`})})]})]}),(0,G.jsxs)(`div`,{className:`mt-1 ml-[3.25rem] flex flex-wrap items-center gap-x-3 gap-y-1 text-xs text-bambu-gray`,children:[e.printer_name&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 shrink-0`,children:[(0,G.jsx)(Ll,{className:`w-3 h-3`}),(0,G.jsx)(`span`,{className:`truncate max-w-[100px] sm:max-w-[140px]`,children:e.printer_name})]}),(f||p)&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 shrink-0`,children:[f?(0,G.jsx)(`span`,{className:`inline-block w-2.5 h-2.5 rounded-full border border-white/15`,style:{backgroundColor:f},"aria-hidden":!0}):(0,G.jsx)(Yu,{className:`w-3 h-3`}),(0,G.jsxs)(`span`,{className:`truncate`,children:[p?`${p}g`:null,p&&e.filament_type?` ${e.filament_type}`:null,!p&&e.filament_type?e.filament_type:null]})]}),e.print_time_seconds&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 shrink-0`,children:[(0,G.jsx)(Mu,{className:`w-3 h-3`}),op(e.print_time_seconds)]}),e.created_by_username&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 shrink-0`,title:o(`queue.addedBy`,{name:e.created_by_username}),children:[(0,G.jsx)(Vu,{className:`w-3 h-3`}),(0,G.jsx)(`span`,{className:`truncate max-w-[120px]`,children:e.created_by_username})]})]}),m&&(0,G.jsxs)(`div`,{className:`mt-1 ml-[3.25rem] flex items-start gap-1 text-xs text-red-700 dark:text-red-400`,children:[(0,G.jsx)(ys,{className:`w-3 h-3 mt-0.5 shrink-0`}),(0,G.jsx)(`span`,{className:`break-words`,children:e.error_message})]})]})}function n8(e){return e.printer_id==null?e.target_model?`model:${e.target_model}`:`unassigned`:`printer:${e.printer_id}`}function r8(e,t,n){if(n){let n=+!!e.been_jumped,r=+!!t.been_jumped;if(n!==r)return r-n;let i=e.print_time_seconds??1/0,a=t.print_time_seconds??1/0;if(i!==a)return i-a}return e.position-t.position}function PHe(e,t,n){let r=n8(e),i=n8(t);if(r!==i){if(e.printer_id!=null&&t.printer_id!=null)return e.printer_id-t.printer_id;let n=i8(e),a=i8(t);return n===a?r<i?-1:1:n-a}return r8(e,t,n)}function i8(e){return e.printer_id==null?e.target_model?1:2:0}function FHe(e){return e?e.split(` | `).map(e=>e.trim()).every(e=>e.startsWith(`Busy:`)):!1}var a8=3600*1e3,o8=24,s8=o8*a8,IHe=32,LHe=40;function RHe(e){return e.toLocaleTimeString(void 0,{hour:`numeric`})}function c8(e){return e.toLocaleTimeString(void 0,{hour:`2-digit`,minute:`2-digit`})}function zHe({queueItems:e,printers:t,printerStatuses:n,sjfEnabled:r,onItemClick:i,t:a}){let[o,s]=(0,y.useState)(()=>new Date);(0,y.useEffect)(()=>{let e=setInterval(()=>s(new Date),6e4);return()=>clearInterval(e)},[]);let[c,l]=(0,y.useState)(0),u=(0,y.useMemo)(()=>{let e=o.getTime()+c;return Math.floor(e/a8)*a8},[o,c]),d=u+s8,f=o.getTime(),p=(0,y.useMemo)(()=>{let t=[],i=new Map,a=new Set,o=new Map;for(let r of e)if(r.status===`printing`){let e=r.printer_id==null?void 0:n[r.printer_id],i=ep(r.started_at)||new Date,s;if(e?.remaining_time!=null&&e.remaining_time>0)s=new Date(f+e.remaining_time*60*1e3);else if(r.print_time_seconds){let t=e?.progress||0,n=Math.max(0,1-t/100);s=new Date(f+r.print_time_seconds*n*1e3)}else s=new Date(f+a8);t.push({item:r,estimatedStart:i,estimatedEnd:s,progress:e?.progress??void 0,type:`printing`});let c=n8(r);a.add(c),o.set(c,Math.max(o.get(c)??f,s.getTime()))}else if(r.status===`pending`){if(r.manual_start||r.waiting_reason&&!FHe(r.waiting_reason))continue;let e=n8(r);i.has(e)||i.set(e,[]),i.get(e).push(r)}let s=Date.now()+4320*a8;for(let[e,n]of i){n.sort((e,t)=>r8(e,t,r));let i=a.has(e),c=n[0]?ep(n[0].scheduled_time):null,l=c&&c.getTime()<=s;if(!i&&!l)continue;let u=o.get(e)??f;for(let e of n){let n=ep(e.scheduled_time);n&&n.getTime()<=s&&(u=Math.max(u,n.getTime()));let r=(e.print_time_seconds||3600)*1e3;t.push({item:e,estimatedStart:new Date(u),estimatedEnd:new Date(u+r),type:`queued`}),u+=r}}return t},[e,n,f,r]),m=(0,y.useMemo)(()=>{let e=[];for(let n of t)e.push({key:`printer:${n.id}`,label:n.name,printerId:n.id,targetModel:null});let n=new Set,r=!1;for(let t of p)if(t.item.printer_id==null)if(t.item.target_model){let r=`model:${t.item.target_model}`;n.has(r)||(n.add(r),e.push({key:r,label:`${a(`queue.filter.any`)} ${t.item.target_model}`,printerId:null,targetModel:t.item.target_model}))}else r=!0;return r&&e.push({key:`unassigned`,label:a(`queue.filter.unassigned`),printerId:null,targetModel:null}),e},[t,p,a]),h=(0,y.useMemo)(()=>{let e=new Map;for(let t of p){let n;n=t.item.printer_id==null?t.item.target_model?`model:${t.item.target_model}`:`unassigned`:`printer:${t.item.printer_id}`,e.has(n)||e.set(n,[]),e.get(n).push(t)}return e},[p]),g=(0,y.useMemo)(()=>{let e=[];for(let t=0;t<=o8;t+=2){let n=u+t*a8;e.push({ms:n,pct:t/o8*100,label:RHe(new Date(n))})}return e},[u]),_=(f-u)/s8*100,v=_>=0&&_<=100,b=(0,y.useMemo)(()=>{let e=0;for(let t of p)e=Math.max(e,t.estimatedEnd.getTime());return e>0?new Date(e):null},[p]),x=(0,y.useRef)(null);return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex flex-col sm:flex-row sm:items-center justify-between gap-3 mb-5`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>l(e=>e-12*a8),className:`p-1.5`,title:a(`queue.timeline.window.back12h`),children:(0,G.jsx)(hs,{className:`w-4 h-4`})}),(0,G.jsxs)(`span`,{className:`text-sm font-medium text-white min-w-[180px] text-center`,children:[new Date(u).toLocaleString(void 0,{weekday:`short`,month:`short`,day:`numeric`,hour:`2-digit`,minute:`2-digit`}),` → `,new Date(d).toLocaleTimeString(void 0,{hour:`2-digit`,minute:`2-digit`})]}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>l(e=>e+12*a8),className:`p-1.5`,title:a(`queue.timeline.window.forward12h`),children:(0,G.jsx)(ms,{className:`w-4 h-4`})}),c!==0&&(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>l(0),className:`text-xs text-bambu-green`,children:a(`queue.timeline.window.now`)})]}),b&&(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray flex items-center gap-1.5`,children:[(0,G.jsx)(js,{className:`w-3.5 h-3.5`}),a(`queue.timeline.allDoneBy`,{time:b.toLocaleString(void 0,{weekday:`short`,hour:`2-digit`,minute:`2-digit`})})]})]}),m.length>0&&p.length===0&&(0,G.jsx)(`div`,{className:`mb-4 p-3 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark/40 text-xs text-bambu-gray`,children:a(`queue.timeline.nothingCommitted`)}),m.length===0?(0,G.jsxs)(`div`,{className:`flex flex-col items-center justify-center py-16 text-bambu-gray`,children:[(0,G.jsx)(qc,{className:`w-12 h-12 mb-3 opacity-30`}),(0,G.jsx)(`p`,{className:`text-sm`,children:a(`queue.timeline.noData`)})]}):(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary overflow-hidden`,children:[(0,G.jsxs)(`div`,{className:`flex border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`div`,{className:`w-32 sm:w-40 shrink-0 px-3 py-2 text-xs font-medium text-bambu-gray border-r border-bambu-dark-tertiary`,children:a(`queue.timeline.printerColumnHeader`)}),(0,G.jsx)(`div`,{className:`relative flex-1 h-9`,children:g.map(e=>(0,G.jsx)(`div`,{className:`absolute top-0 bottom-0 border-l border-bambu-dark-tertiary/40 text-[10px] sm:text-xs text-bambu-gray pl-1 flex items-center`,style:{left:`${e.pct}%`},children:e.label},e.ms))})]}),(0,G.jsxs)(`div`,{ref:x,className:`relative`,children:[m.map(e=>{let t=h.get(e.key)??[];return(0,G.jsxs)(`div`,{className:`flex border-b border-bambu-dark-tertiary/40 last:border-b-0`,children:[(0,G.jsxs)(`div`,{className:`w-32 sm:w-40 shrink-0 px-3 py-3 border-r border-bambu-dark-tertiary flex items-center gap-2`,children:[(0,G.jsx)(Ll,{className:`w-3.5 h-3.5 shrink-0 ${e.printerId==null&&e.targetModel==null?`text-orange-600 dark:text-orange-400`:e.targetModel?`text-blue-600 dark:text-blue-400`:`text-bambu-green`}`}),(0,G.jsx)(`span`,{className:`text-sm text-white truncate`,children:e.label})]}),(0,G.jsxs)(`div`,{className:`relative flex-1`,style:{height:56},children:[g.map(e=>(0,G.jsx)(`div`,{className:`absolute top-0 bottom-0 border-l border-bambu-dark-tertiary/30`,style:{left:`${e.pct}%`}},e.ms)),(0,G.jsx)(`div`,{className:`absolute inset-0 opacity-30`,style:{backgroundImage:`repeating-linear-gradient(45deg, transparent, transparent 6px, rgba(255,255,255,0.04) 6px, rgba(255,255,255,0.04) 12px)`},"aria-hidden":!0}),t.map(e=>{let t=Math.max(u,e.estimatedStart.getTime()),n=Math.min(d,e.estimatedEnd.getTime());if(n<=u||t>=d)return null;let r=(t-u)/s8*100,a=(n-t)/s8*100,o=e.item.archive_name||e.item.library_file_name||`#${e.item.id}`,s=e.item.archive_thumbnail?Z.getArchiveThumbnail(e.item.archive_id):e.item.library_file_thumbnail?Z.getLibraryFileThumbnailUrl(e.item.library_file_id):null,c=e.type===`printing`,l=e.item.batch_id!=null;return(0,G.jsxs)(`button`,{onClick:()=>i(e.item),title:[o,`${c8(e.estimatedStart)} → ${c8(e.estimatedEnd)}`,e.item.print_time_seconds?op(e.item.print_time_seconds):null,c&&e.progress!=null?`${Math.round(e.progress)}%`:null,e.item.batch_name?`batch: ${e.item.batch_name}`:null].filter(Boolean).join(` · `),className:`absolute rounded-md transition-all hover:brightness-110 hover:z-10 overflow-hidden flex items-center gap-1.5 px-1.5 text-left ${c?`bg-blue-500/30 border border-blue-400/60`:l?`bg-cyan-500/20 border border-cyan-400/50`:`bg-bambu-green/20 border border-bambu-green/40`}`,style:{left:`${r}%`,width:`max(${IHe}px, ${a}%)`,top:8,height:LHe},children:[s&&(0,G.jsx)(`img`,{src:s,alt:``,className:`w-7 h-7 rounded object-cover shrink-0 bg-bambu-dark`}),(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`div`,{className:`text-xs text-white font-medium truncate leading-tight`,children:o}),(0,G.jsxs)(`div`,{className:`text-[10px] text-bambu-gray truncate leading-tight`,children:[e.item.print_time_seconds?op(e.item.print_time_seconds):``,c&&e.progress!=null?` · ${Math.round(e.progress)}%`:``]})]}),c&&e.progress!=null&&(0,G.jsx)(`div`,{className:`absolute bottom-0 left-0 h-0.5 bg-blue-300`,style:{width:`${e.progress}%`},"aria-hidden":!0})]},e.item.id)})]})]},e.key)}),v&&(0,G.jsxs)(`div`,{className:`absolute top-0 bottom-0 pointer-events-none z-20 flex inset-x-0`,children:[(0,G.jsx)(`div`,{className:`w-32 sm:w-40 shrink-0`}),(0,G.jsx)(`div`,{className:`relative flex-1`,children:(0,G.jsx)(`div`,{className:`absolute top-0 bottom-0 w-0.5 bg-red-400 shadow-[0_0_8px_rgba(248,113,113,0.6)]`,style:{left:`${_}%`},children:(0,G.jsx)(`div`,{className:`absolute -top-1 -left-1 w-2.5 h-2.5 bg-red-400 rounded-full`})})})]})]})]})]})}function BHe({hasPermission:e,t}){let n=co(),{showToast:r}=Gd(),[i,a]=(0,y.useState)(`active`),[o,s]=(0,y.useState)(null),{data:c}=K({queryKey:[`settings`],queryFn:Z.getSettings}),l=Pf(c?.currency||`USD`),{data:u,isLoading:d}=K({queryKey:[`batches`,i],queryFn:()=>Z.getBatches(i===`all`?void 0:i)}),f=()=>{n.invalidateQueries({queryKey:[`batches`]}),n.invalidateQueries({queryKey:[`queue`]})},p=q({mutationFn:({id:e,plateId:t})=>Z.dispatchBatch(e,t===void 0?{}:{plate_id:t,only_plate:!0}),onSuccess:e=>{f(),r(t(`queue.batchOrders.dispatched`,{name:e.name}),`success`)},onError:e=>r(e.message,`error`)}),m=q({mutationFn:e=>Z.cancelBatch(e),onSuccess:()=>{f(),s(null),r(t(`queue.batchCancelled`),`success`)},onError:e=>r(e.message,`error`)}),h=e(`queue:create`),g=e(`queue:delete_all`);return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 mb-4`,children:[(0,G.jsx)(Sl,{className:`w-5 h-5 text-cyan-700 dark:text-cyan-300`}),(0,G.jsx)(`h2`,{className:`text-base sm:text-lg font-semibold text-white`,children:t(`queue.batchOrders.title`)}),(0,G.jsx)(`div`,{className:`flex gap-1 ml-auto`,children:[`active`,`completed`,`cancelled`,`all`].map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>a(e),className:`text-xs px-2.5 py-1 rounded-full border transition-colors ${i===e?`border-bambu-green bg-bambu-green/10 text-bambu-green`:`border-bambu-dark-tertiary text-bambu-gray hover:border-bambu-gray`}`,children:t(`queue.batchOrders.filter.${e}`)},e))})]}),d?(0,G.jsx)(`div`,{className:`text-center py-12 text-bambu-gray`,children:t(`common.loading`)}):u?.length?(0,G.jsx)(`div`,{className:`space-y-4`,children:u.map(e=>(0,G.jsx)(VHe,{batch:e,currency:l,canDispatch:h,canCancel:g,isDispatching:p.isPending&&p.variables?.id===e.id,onDispatch:t=>p.mutate({id:e.id,plateId:t}),onCancel:()=>s(e),t},e.id))}):(0,G.jsxs)(Ld,{className:`p-12 text-center border-dashed`,children:[(0,G.jsx)(Sl,{className:`w-16 h-16 text-bambu-gray mx-auto mb-4 opacity-50`}),(0,G.jsx)(`h3`,{className:`text-xl font-medium text-white mb-2`,children:t(`queue.batchOrders.emptyTitle`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray max-w-md mx-auto`,children:t(`queue.batchOrders.emptyDescription`)})]}),o&&(0,G.jsx)(rf,{title:t(`queue.cancelBatchConfirmTitle`),message:t(`queue.cancelBatchConfirmMessage`),confirmText:t(`queue.cancelBatch`),variant:`warning`,onConfirm:()=>m.mutate(o.id),onCancel:()=>s(null)})]})}var l8={active:`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-300`,completed:`bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-300`,cancelled:`bg-bambu-dark-tertiary text-bambu-gray`};function VHe({batch:e,currency:t,canDispatch:n,canCancel:r,isDispatching:i,onDispatch:a,onCancel:o,t:s}){let c=e.has_targets?e.target_count:e.completed_count+e.pending_count+e.printing_count+e.failed_count,l=c>0?Math.round(e.completed_count/c*100):0,u=e.has_targets?e.remaining_count-e.dispatchable_count:0,d=e.due_date?ep(e.due_date):null,f=d!=null&&e.status===`active`&&d.getTime()<Date.now();return(0,G.jsxs)(Ld,{className:`p-4`,children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-start gap-3 mb-3`,children:[(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-wrap`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium truncate`,children:e.name}),(0,G.jsx)(`span`,{className:`text-xs px-2 py-0.5 rounded-full ${l8[e.status]??l8.cancelled}`,children:s(`queue.batchOrders.status.${e.status}`)}),!e.has_targets&&(0,G.jsx)(`span`,{className:`text-xs px-2 py-0.5 rounded-full bg-bambu-dark-tertiary text-bambu-gray`,title:s(`queue.batchOrders.noTargetsHint`),children:s(`queue.batchOrders.noTargets`)})]}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:[e.created_by_username?s(`queue.addedBy`,{name:e.created_by_username}):null,d&&(0,G.jsxs)(`span`,{className:f?`text-orange-600 dark:text-orange-400`:``,children:[e.created_by_username?` • `:``,s(`queue.batchOrders.due`,{date:d.toLocaleDateString()})]})]}),e.notes&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1 whitespace-pre-wrap`,children:e.notes})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-shrink-0`,children:[e.has_targets&&e.dispatchable_count>0&&e.status!==`cancelled`&&n&&(0,G.jsxs)(Q,{variant:`primary`,size:`sm`,onClick:()=>a(),disabled:i,children:[(0,G.jsx)(Ts,{className:`w-4 h-4 mr-1`}),s(`queue.batchOrders.dispatchRemaining`,{count:e.dispatchable_count})]}),e.status===`active`&&r&&(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:o,children:[(0,G.jsx)(Ds,{className:`w-4 h-4 mr-1`}),s(`queue.cancelBatch`)]})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mb-2`,children:[(0,G.jsx)(`div`,{className:`flex-1 h-2 bg-bambu-dark-tertiary rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full transition-all ${e.status===`completed`?`bg-bambu-green`:`bg-blue-500`}`,style:{width:`${Math.min(100,l)}%`}})}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray whitespace-nowrap tabular-nums`,children:s(`queue.batchProgress`,{completed:e.completed_count,total:c})})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-x-4 gap-y-1 text-xs text-bambu-gray mb-1`,children:[e.printing_count>0&&(0,G.jsx)(`span`,{children:s(`queue.batchOrders.printing`,{count:e.printing_count})}),e.pending_count>0&&(0,G.jsx)(`span`,{children:s(`queue.batch.pendingCount`,{count:e.pending_count})}),e.failed_count>0&&(0,G.jsxs)(`span`,{className:`text-orange-600 dark:text-orange-400 flex items-center gap-1`,children:[(0,G.jsx)(Iu,{className:`w-3 h-3`}),s(`queue.batchOrders.failed`,{count:e.failed_count})]}),e.has_targets&&e.remaining_count>0&&(0,G.jsx)(`span`,{children:s(`queue.batchOrders.remaining`,{count:e.remaining_count})}),e.print_time_seconds>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(js,{className:`w-3 h-3`}),op(e.print_time_seconds)]}),e.actual_cost!=null&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(Ls,{className:`w-3 h-3`}),(0,G.jsx)(`span`,{children:s(`queue.batchOrders.costSoFar`,{amount:`${t} ${e.actual_cost.toFixed(2)}`})}),e.estimated_remaining_cost!=null&&e.estimated_remaining_cost>0&&(0,G.jsx)(`span`,{children:s(`queue.batchOrders.costRemaining`,{amount:`${t} ${e.estimated_remaining_cost.toFixed(2)}`})})]})]}),u>0&&e.status!==`cancelled`&&(0,G.jsxs)(`p`,{className:`flex items-start gap-1.5 text-xs text-orange-600 dark:text-orange-400 mb-1`,children:[(0,G.jsx)(Iu,{className:`w-3 h-3 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`span`,{children:s(`queue.batchOrders.strandedNotice`,{runs:u,owed:e.remaining_count})})]}),e.has_targets&&e.plates.length>0&&(0,G.jsx)(`div`,{className:`mt-3 border-t border-bambu-dark-tertiary pt-3 space-y-1.5`,children:e.plates.map(r=>(0,G.jsx)(HHe,{plate:r,batchStatus:e.status,currency:t,canDispatch:n,isDispatching:i,onDispatch:()=>a(r.plate_id),t:s},`${r.plate_id??`file`}`))})]})}function HHe({plate:e,batchStatus:t,currency:n,canDispatch:r,isDispatching:i,onDispatch:a,t:o}){let s=e.plate_name||(e.plate_id==null?o(`queue.batchOrders.wholeFile`):o(`queue.plateNumber`,{index:e.plate_id}));return(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-x-3 gap-y-1 text-xs`,children:[(0,G.jsx)(qc,{className:`w-3.5 h-3.5 text-bambu-gray flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-white min-w-0 truncate`,children:s}),(0,G.jsx)(`span`,{className:`text-bambu-gray tabular-nums`,children:o(`queue.batchOrders.plateProgress`,{completed:e.completed_count,target:e.quantity_target})}),e.failed_count>0&&(0,G.jsx)(`span`,{className:`text-orange-600 dark:text-orange-400`,children:o(`queue.batchOrders.failed`,{count:e.failed_count})}),e.actual_cost!=null&&(0,G.jsx)(`span`,{className:`text-bambu-gray tabular-nums`,children:`${n} ${e.actual_cost.toFixed(2)}`}),e.remaining>0&&t!==`cancelled`&&(0,G.jsxs)(`span`,{className:`ml-auto flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:o(`queue.batchOrders.remaining`,{count:e.remaining})}),e.can_dispatch?r&&(0,G.jsx)(`button`,{type:`button`,onClick:a,disabled:i,className:`text-bambu-green hover:underline disabled:opacity-50`,children:o(`queue.batchOrders.dispatchPlate`)}):(0,G.jsx)(`span`,{className:`text-orange-600 dark:text-orange-400`,children:o(`queue.batchOrders.strandedPlate`)})]})]})}function u8(e,t=!1){return t&&e>=1e3?`${(e/1e3).toFixed(1)}kg`:`${Math.round(e)}g`}function UHe({status:e,waitingReason:t,printerState:n,t:r}){if(e===`pending`&&t)return(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1.5 px-2.5 py-1 rounded-full text-xs font-medium border text-purple-700 dark:text-purple-400 bg-purple-50 dark:bg-purple-400/10 border-purple-200 dark:border-purple-400/20`,children:[(0,G.jsx)(js,{className:`w-3.5 h-3.5`}),r(`queue.status.waiting`)]});if(e===`printing`&&n===`PAUSE`)return(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1.5 px-2.5 py-1 rounded-full text-xs font-medium border text-yellow-700 dark:text-yellow-400 bg-yellow-50 dark:bg-yellow-400/10 border-yellow-200 dark:border-yellow-400/20`,children:[(0,G.jsx)(El,{className:`w-3.5 h-3.5`}),r(`queue.status.paused`)]});let{icon:i,color:a,label:o}={pending:{icon:js,color:`text-status-warning bg-status-warning/10 border-status-warning/20`,label:r(`queue.status.pending`)},printing:{icon:Ml,color:`text-blue-700 dark:text-blue-400 bg-blue-50 dark:bg-blue-400/10 border-blue-200 dark:border-blue-400/20`,label:r(`queue.status.printing`)},completed:{icon:xs,color:`text-status-ok bg-status-ok/10 border-status-ok/20`,label:r(`queue.status.completed`)},failed:{icon:Ds,color:`text-status-error bg-status-error/10 border-status-error/20`,label:r(`queue.status.failed`)},skipped:{icon:uu,color:`text-orange-700 dark:text-orange-400 bg-orange-50 dark:bg-orange-400/10 border-orange-200 dark:border-orange-400/20`,label:r(`queue.status.skipped`)},cancelled:{icon:td,color:`text-gray-400 bg-gray-400/10 border-gray-400/20`,label:r(`queue.status.cancelled`)}}[e];return(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1.5 px-2.5 py-1 rounded-full text-xs font-medium border ${a}`,children:[(0,G.jsx)(i,{className:`w-3.5 h-3.5`}),o]})}function WHe({selectedCount:e,printers:t,onSave:n,onClose:r,isSaving:i,canControlPrinter:a,hasGcodeSnippets:o,t:s}){let[c,l]=(0,y.useState)(`unchanged`),[u,d]=(0,y.useState)(`unchanged`),[f,p]=(0,y.useState)(`unchanged`),[m,h]=(0,y.useState)(`unchanged`),[g,_]=(0,y.useState)(`unchanged`),[v,b]=(0,y.useState)(`unchanged`),[x,S]=(0,y.useState)(`unchanged`),[C,w]=(0,y.useState)(`unchanged`),[T,E]=(0,y.useState)(`unchanged`),[D,O]=(0,y.useState)(`unchanged`),[k,A]=(0,y.useState)(`unchanged`),[j,M]=(0,y.useState)(`unchanged`),N=t.some(e=>e.nozzle_count===2),P=()=>{let e={};c!==`unchanged`&&(e.printer_id=c),u!==`unchanged`&&(e.manual_start=u),f!==`unchanged`&&(e.auto_off_after=f),m!==`unchanged`&&(e.require_previous_success=m),g!==`unchanged`&&(e.gcode_injection=g),v!==`unchanged`&&(e.bed_levelling=v),x!==`unchanged`&&(e.flow_cali=x),C!==`unchanged`&&(e.vibration_cali=C),T!==`unchanged`&&(e.layer_inspect=T),D!==`unchanged`&&(e.timelapse=D),k!==`unchanged`&&(e.use_ams=k),j!==`unchanged`&&(e.nozzle_offset_cali=j),n(e)},F=c!==`unchanged`||u!==`unchanged`||f!==`unchanged`||m!==`unchanged`||v!==`unchanged`||x!==`unchanged`||C!==`unchanged`||T!==`unchanged`||D!==`unchanged`||k!==`unchanged`||j!==`unchanged`||g!==`unchanged`;return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center p-4 bg-black/50 backdrop-blur-sm`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-lg max-h-[90vh] overflow-y-auto`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:s(`queue.bulkEdit.title`,{count:e})}),(0,G.jsx)(`button`,{onClick:r,className:`p-1 hover:bg-bambu-dark rounded`,children:(0,G.jsx)(td,{className:`w-5 h-5 text-bambu-gray`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:s(`queue.bulkEdit.description`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:s(`queue.bulkEdit.printer`)}),(0,G.jsxs)(`select`,{value:c===null?`null`:c===`unchanged`?`unchanged`:String(c),onChange:e=>{let t=e.target.value;l(t===`unchanged`?`unchanged`:t===`null`?null:Number(t))},className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`unchanged`,children:s(`queue.bulkEdit.noChange`)}),(0,G.jsx)(`option`,{value:`null`,children:s(`queue.filter.unassigned`)}),t.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:s(`queue.bulkEdit.queueOptions`)}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(d8,{label:s(`queue.bulkEdit.staged`),value:u,onChange:d,t:s}),(0,G.jsx)(d8,{label:s(`queue.bulkEdit.autoPowerOff`),value:f,onChange:p,disabled:!a,t:s}),(0,G.jsx)(d8,{label:s(`queue.bulkEdit.requirePrevious`),value:m,onChange:h,t:s}),o&&(0,G.jsx)(d8,{label:s(`queue.bulkEdit.gcodeInjection`),value:g,onChange:_,t:s})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:s(`queue.bulkEdit.printOptions`)}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(f8,{label:s(`queue.bulkEdit.bedLevelling`),value:v,onChange:b,t:s}),(0,G.jsx)(f8,{label:s(`queue.bulkEdit.flowCalibration`),value:x,onChange:S,t:s}),(0,G.jsx)(d8,{label:s(`queue.bulkEdit.vibrationCalibration`),value:C,onChange:w,t:s}),(0,G.jsx)(d8,{label:s(`queue.bulkEdit.layerInspection`),value:T,onChange:E,t:s}),(0,G.jsx)(d8,{label:s(`queue.bulkEdit.timelapse`),value:D,onChange:O,t:s}),(0,G.jsx)(d8,{label:s(`queue.bulkEdit.useAms`),value:k,onChange:A,t:s}),N&&(0,G.jsx)(f8,{label:s(`queue.bulkEdit.nozzleOffsetCali`),value:j,onChange:M,t:s})]})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-3 p-4 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:r,children:s(`common.cancel`)}),(0,G.jsx)(Q,{onClick:P,disabled:!F||i,children:s(i?`common.saving`:`queue.bulkEdit.applyChanges`)})]})]})})}function d8({label:e,value:t,onChange:n,disabled:r,t:i}){return(0,G.jsxs)(`div`,{className:`flex items-center justify-between py-1 ${r?`opacity-50`:``}`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 bg-bambu-dark rounded-lg p-0.5`,children:[(0,G.jsx)(`button`,{onClick:()=>n(`unchanged`),disabled:r,className:`px-2 py-1 text-xs rounded ${t===`unchanged`?`bg-bambu-dark-tertiary text-white`:`text-bambu-gray hover:text-white`} disabled:cursor-not-allowed`,children:`—`}),(0,G.jsx)(`button`,{onClick:()=>n(!1),disabled:r,className:`px-2 py-1 text-xs rounded ${t===!1?`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`:`text-bambu-gray hover:text-white`} disabled:cursor-not-allowed`,children:i(`common.off`)}),(0,G.jsx)(`button`,{onClick:()=>n(!0),disabled:r,className:`px-2 py-1 text-xs rounded ${t===!0?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:text-white`} disabled:cursor-not-allowed`,children:i(`common.on`)})]})]})}function f8({label:e,value:t,onChange:n,t:r}){let i=[{key:`unchanged`,label:`—`,active:`bg-bambu-dark-tertiary text-white`},{key:`off`,label:r(`settings.calibrationMode_off`),active:`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`},{key:`auto`,label:r(`settings.calibrationMode_auto`),active:`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`},{key:`on`,label:r(`settings.calibrationMode_on`),active:`bg-bambu-green/20 text-bambu-green`}];return(0,G.jsxs)(`div`,{className:`flex items-center justify-between py-1`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e}),(0,G.jsx)(`div`,{className:`flex items-center gap-1 bg-bambu-dark rounded-lg p-0.5`,children:i.map(({key:e,label:r,active:i})=>(0,G.jsx)(`button`,{onClick:()=>n(e),className:`px-2 py-1 text-xs rounded ${t===e?i:`text-bambu-gray hover:text-white`}`,children:r},e))})]})}function p8({item:e,position:t,onEdit:n,onCancel:r,onRemove:i,onStop:a,onRequeue:o,onStart:s,onMoveUp:c,onMoveDown:l,timeFormat:u=`system`,isSelected:d=!1,onToggleSelect:f,hasPermission:p,canModify:m,printerState:h,showEta:g=!1,etaNow:_,t:v}){let{data:y}=K({queryKey:[`printerStatus`,e.printer_id],queryFn:()=>Z.getPrinterStatus(e.printer_id),refetchInterval:3e4,enabled:e.printer_id!=null&&h===`printing`}),b=!!e.library_file_id&&!e.archive_id,{data:x}=K({queryKey:[`archive-plates`,e.archive_id],queryFn:()=>Z.getArchivePlates(e.archive_id),enabled:!!e.archive_id&&!b&&!e.archive_deleted}),{data:S}=K({queryKey:[`library-file-plates`,e.library_file_id],queryFn:()=>Z.getLibraryFilePlates(e.library_file_id),enabled:b&&!!e.library_file_id}),C=b?S:x,w=C?.plates??[],T=p(`queue:reorder`),{attributes:E,listeners:D,setNodeRef:O,transform:k,transition:A,isDragging:j}=J6({id:e.id,disabled:e.status!==`pending`||!T}),M={transform:E3.Transform.toString(k),transition:A},N=e.status===`printing`,P=e.status===`pending`,F=[`completed`,`failed`,`skipped`,`cancelled`].includes(e.status),I=P&&g&&e.print_time_seconds!=null&&e.print_time_seconds>0?ap(e.print_time_seconds/60,u,v,_):null,L=P&&f;return(0,G.jsxs)(`div`,{ref:O,style:M,className:`
         group relative bg-bambu-dark-secondary rounded-xl border transition-all duration-200
         border-l-[3px] ${N?`border-l-blue-500`:P?`border-l-yellow-500`:e.status===`completed`?`border-l-emerald-500`:e.status===`failed`?`border-l-red-500`:`border-l-gray-500`}
         ${j?`opacity-50 scale-[1.02] shadow-xl z-50`:``}
@@ -4363,16 +4363,16 @@ img.ProseMirror-separator {
         ${d&&L?`sm:border-bambu-dark-tertiary border-bambu-green/40`:``}
         ${!d&&!N?`border-bambu-dark-tertiary hover:border-bambu-dark-tertiary/80`:``}
         ${L?`cursor-pointer sm:cursor-default`:``}
-      `,onClick:L?()=>{window.innerWidth<640&&f()}:void 0,children:[L&&d&&(0,G.jsx)(`div`,{className:`sm:hidden absolute left-0 top-3 bottom-3 w-1 rounded-full bg-bambu-green`}),(0,G.jsxs)(`div`,{className:`flex items-start sm:items-center gap-2 sm:gap-4 p-3 sm:p-4`,children:[P&&(c||l)&&(0,G.jsxs)(`div`,{className:`flex sm:hidden flex-col shrink-0 -my-1`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(`button`,{type:`button`,onClick:c,disabled:!c,title:v(`queue.moveUp`),"aria-label":v(`queue.moveUp`),className:`flex items-center justify-center w-8 h-7 rounded-lg text-bambu-gray hover:text-white hover:bg-bambu-dark disabled:opacity-25 disabled:hover:bg-transparent transition-colors`,children:(0,G.jsx)(gs,{className:`w-5 h-5`})}),(0,G.jsx)(`button`,{type:`button`,onClick:l,disabled:!l,title:v(`queue.moveDown`),"aria-label":v(`queue.moveDown`),className:`flex items-center justify-center w-8 h-7 rounded-lg text-bambu-gray hover:text-white hover:bg-bambu-dark disabled:opacity-25 disabled:hover:bg-transparent transition-colors`,children:(0,G.jsx)(ps,{className:`w-5 h-5`})})]}),P&&f&&(0,G.jsx)(`button`,{onClick:e=>{e.stopPropagation(),f()},className:`hidden sm:flex items-center justify-center w-6 h-6 rounded border transition-colors shrink-0 ${d?`bg-bambu-green border-bambu-green text-white`:`border-white/30 bg-black/30 hover:border-bambu-green/50`}`,children:d&&(0,G.jsx)(fs,{className:`w-4 h-4`})}),P?(0,G.jsx)(`div`,{...E,...D,className:`hidden sm:flex items-center justify-center w-8 h-8 rounded-lg bg-bambu-dark cursor-grab active:cursor-grabbing hover:bg-bambu-dark-tertiary transition-colors touch-none shrink-0`,children:(0,G.jsx)(Ac,{className:`w-4 h-4 text-bambu-gray`})}):t===void 0?(0,G.jsx)(`div`,{className:`hidden sm:block w-8 shrink-0`}):(0,G.jsxs)(`div`,{className:`hidden sm:flex items-center justify-center w-8 h-8 rounded-lg bg-bambu-dark text-bambu-gray text-sm font-medium shrink-0`,children:[`#`,t]}),(0,G.jsx)(`div`,{className:`w-10 h-10 sm:w-14 sm:h-14 flex-shrink-0 bg-bambu-dark rounded-lg overflow-hidden`,children:e.archive_thumbnail?(0,G.jsx)(`img`,{src:e.plate_id==null?Z.getArchiveThumbnail(e.archive_id):Z.getArchivePlateThumbnail(e.archive_id,e.plate_id),alt:``,className:`w-full h-full object-cover`}):e.library_file_thumbnail?(0,G.jsx)(`img`,{src:e.plate_id==null?Z.getLibraryFileThumbnailUrl(e.library_file_id):Z.getLibraryFilePlateThumbnail(e.library_file_id,e.plate_id),alt:``,className:`w-full h-full object-cover`}):(0,G.jsx)(`div`,{className:`w-full h-full flex items-center justify-center text-bambu-gray`,children:(0,G.jsx)(qc,{className:`w-5 h-5 sm:w-6 sm:h-6`})})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1`,children:[(0,G.jsxs)(`p`,{className:`text-sm sm:text-base text-white font-medium truncate`,children:[LT(e,e=>v(`common.plusNMore`,{count:e})),(C?.is_multi_plate??!1)&&e.plate_id!==void 0&&e.plate_id!==null&&` • ${w.find(t=>t.index===e.plate_id)?.name||v(`queue.plateNumber`,{index:e.plate_id})}`]}),e.archive_id?(0,G.jsx)(Ai,{to:`/archives?highlight=${e.archive_id}`,className:`text-bambu-gray hover:text-bambu-green transition-colors flex-shrink-0`,title:v(`queue.viewArchive`),children:(0,G.jsx)(nc,{className:`w-3.5 h-3.5`})}):e.library_file_id?(0,G.jsx)(Ai,{to:`/library?highlight=${e.library_file_id}`,className:`text-bambu-gray hover:text-bambu-green transition-colors flex-shrink-0`,title:v(`queue.viewInFileManager`),children:(0,G.jsx)(nc,{className:`w-3.5 h-3.5`})}):null,e.batch_name&&(0,G.jsx)(`span`,{className:`flex-shrink-0 px-1.5 py-0.5 text-[10px] sm:text-xs bg-cyan-100 dark:bg-cyan-500/20 text-cyan-700 dark:text-cyan-300 rounded border border-cyan-300 dark:border-cyan-500/30`,children:e.batch_name})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-x-3 gap-y-1 text-xs sm:text-sm text-bambu-gray`,children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-1 sm:gap-1.5 ${e.printer_id===null&&!e.target_model?`text-orange-700 dark:text-orange-400`:``} ${e.target_model&&!e.printer_id?`text-blue-700 dark:text-blue-400`:``}`,children:[(0,G.jsx)(Ll,{className:`w-3 h-3 sm:w-3.5 sm:h-3.5`}),(0,G.jsx)(`span`,{className:`truncate max-w-[120px] sm:max-w-none`,children:(e.variants?.length??0)>1&&!e.printer_id?`${v(`queue.filter.any`)} ${e.variants.map(e=>e.target_model).join(` / `)}${e.target_location?` @ ${e.target_location}`:``}`:e.target_model&&!e.printer_id?`${v(`queue.filter.any`)} ${e.target_model}${e.target_location?` @ ${e.target_location}`:``}${e.required_filament_types?.length?` (${e.required_filament_types.join(`, `)})`:``}`:e.printer_id===null?v(`queue.filter.unassigned`):e.printer_name||`${v(`common.printer`)} #${e.printer_id}`})]}),e.print_time_seconds&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 sm:gap-1.5`,children:[(0,G.jsx)(Mu,{className:`w-3 h-3 sm:w-3.5 sm:h-3.5`}),op(e.print_time_seconds)]}),I&&(0,G.jsxs)(`span`,{"data-testid":`queue-item-eta`,className:`text-bambu-green font-medium`,title:v(`queue.time.etaIfStartedNow`),children:[`ETA `,I]}),e.filament_used_grams&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 sm:gap-1.5`,children:[(0,G.jsx)(Yu,{className:`w-3 h-3 sm:w-3.5 sm:h-3.5`}),s8(e.filament_used_grams)]}),(()=>{let t=kW(e.bed_type);return t?(0,G.jsxs)(`span`,{className:`flex items-center gap-1 sm:gap-1.5`,title:t.label,children:[(0,G.jsx)(`img`,{src:t.icon,alt:``,className:`w-3.5 h-3.5 sm:w-4 sm:h-4 object-contain`}),(0,G.jsx)(`span`,{className:`truncate max-w-[120px]`,children:t.label})]}):null})(),e.created_by_username&&(0,G.jsxs)(`span`,{className:`hidden sm:flex items-center gap-1.5`,title:v(`queue.addedBy`,{name:e.created_by_username}),children:[(0,G.jsx)(Vu,{className:`w-3.5 h-3.5`}),e.created_by_username]}),P&&!e.manual_start&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(js,{className:`w-3.5 h-3.5`}),e.scheduled_time?(ep(e.scheduled_time)?.getTime()??0)-Date.now()<-6e4?v?.(`queue.time.overdue`)??`Overdue`:sp(e.scheduled_time,u,v):v?.(`queue.time.whenFree`)??`When a printer is free`]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-1.5 sm:gap-2 mt-1.5 sm:mt-2`,children:[e.manual_start&&(0,G.jsxs)(`span`,{className:`text-[10px] sm:text-xs px-1.5 sm:px-2 py-0.5 bg-purple-50 dark:bg-purple-500/10 text-purple-700 dark:text-purple-400 rounded-full border border-purple-200 dark:border-purple-500/20 flex items-center gap-1`,children:[(0,G.jsx)(Mc,{className:`w-2.5 h-2.5 sm:w-3 sm:h-3`}),v(`queue.badges.staged`)]}),e.require_previous_success&&(0,G.jsx)(`span`,{className:`text-[10px] sm:text-xs px-1.5 sm:px-2 py-0.5 bg-orange-50 dark:bg-orange-500/10 text-orange-700 dark:text-orange-400 rounded-full border border-orange-200 dark:border-orange-500/20`,children:v(`queue.badges.requiresPrevious`)}),e.auto_off_after&&(0,G.jsxs)(`span`,{className:`text-[10px] sm:text-xs px-1.5 sm:px-2 py-0.5 bg-blue-50 dark:bg-blue-500/10 text-blue-700 dark:text-blue-400 rounded-full border border-blue-200 dark:border-blue-500/20 flex items-center gap-1`,children:[(0,G.jsx)(Il,{className:`w-2.5 h-2.5 sm:w-3 sm:h-3`}),v(`queue.badges.autoPowerOff`)]}),e.gcode_injection&&(0,G.jsxs)(`span`,{className:`text-[10px] sm:text-xs px-1.5 sm:px-2 py-0.5 bg-emerald-50 dark:bg-emerald-500/10 text-emerald-700 dark:text-emerald-400 rounded-full border border-emerald-200 dark:border-emerald-500/20 flex items-center gap-1`,children:[(0,G.jsx)(Fs,{className:`w-2.5 h-2.5 sm:w-3 sm:h-3`}),v(`queue.badges.gcodeInjection`)]})]}),N&&y&&(()=>{let e=y.state===`RUNNING`||y.state===`PAUSE`,t=e&&y.progress||0,n=e?y.remaining_time:null,r=e?y.layer_num:null,i=e?y.total_layers:null;return(0,G.jsxs)(`div`,{className:`mt-2 sm:mt-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-xs sm:text-sm`,children:[(0,G.jsx)(`div`,{className:`flex-1 bg-bambu-dark-tertiary rounded-full h-1.5 sm:h-2 mr-3`,children:(0,G.jsx)(`div`,{className:`bg-bambu-green h-1.5 sm:h-2 rounded-full transition-all`,style:{width:`${t}%`}})}),(0,G.jsxs)(`span`,{className:`text-white`,children:[Math.round(t),`%`]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 sm:gap-3 mt-1.5 sm:mt-2 text-[10px] sm:text-xs text-bambu-gray`,children:[n!=null&&n>0&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(js,{className:`w-3 h-3`}),op(n*60)]}),(0,G.jsxs)(`span`,{className:`text-bambu-green font-medium`,title:v(`printers.estimatedCompletion`),children:[`ETA `,ap(n,u,v)]})]}),r!=null&&i!=null&&i>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(qc,{className:`w-3 h-3`}),r,`/`,i]})]})]})})(),e.waiting_reason&&e.status===`pending`&&(0,G.jsxs)(`p`,{className:`text-[10px] sm:text-xs text-purple-700 dark:text-purple-400 mt-1.5 sm:mt-2 flex items-start gap-1`,children:[(0,G.jsx)(ys,{className:`w-3 h-3 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`span`,{children:e.waiting_reason})]}),e.filament_short&&e.status===`pending`&&(0,G.jsxs)(`p`,{className:`text-[10px] sm:text-xs text-yellow-700 dark:text-yellow-400 mt-1.5 sm:mt-2 flex items-start gap-1`,title:v(`queue.filamentShort.rowTooltip`),children:[(0,G.jsx)(ys,{className:`w-3 h-3 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`span`,{children:v(`queue.filamentShort.rowBadge`)})]}),e.archive_has_slicer_ams_mapping&&(0,G.jsxs)(`p`,{className:`text-[10px] sm:text-xs text-green-700 dark:text-green-400 mt-1.5 sm:mt-2 flex items-start gap-1`,title:v(`queue.slicerAmsMapping.rowTooltip`),children:[(0,G.jsx)(fs,{className:`w-3 h-3 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`span`,{children:v(`queue.slicerAmsMapping.rowBadge`)})]}),e.error_message&&(0,G.jsxs)(`p`,{className:`text-[10px] sm:text-xs text-red-700 dark:text-red-400 mt-1.5 sm:mt-2 flex items-center gap-1`,children:[(0,G.jsx)(ys,{className:`w-3 h-3`}),e.error_message]})]}),(0,G.jsxs)(`div`,{className:`flex flex-col sm:flex-row items-end sm:items-center gap-2 sm:gap-1 shrink-0`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(HHe,{status:e.status,waitingReason:e.waiting_reason,printerState:h,t:v}),(0,G.jsxs)(`div`,{className:`flex items-center gap-0.5 sm:gap-1`,children:[N&&(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:a,disabled:!m(`queue`,`update`,e.created_by_id),title:m(`queue`,`update`,e.created_by_id)?v(`queue.actions.stopPrint`):v(`queue.permissions.noStopPrint`),className:`text-red-600 dark:text-red-400 hover:text-red-700 dark:hover:text-red-300 hover:bg-red-50 dark:hover:bg-red-500/10 p-1.5 sm:p-2`,children:(0,G.jsx)(Es,{className:`w-4 h-4`})}),P&&(0,G.jsxs)(G.Fragment,{children:[e.manual_start&&(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:s,disabled:!m(`queue`,`update`,e.created_by_id),title:m(`queue`,`update`,e.created_by_id)?v(`queue.actions.startPrint`):v(`queue.permissions.noStartPrint`),className:`text-bambu-green hover:text-bambu-green-light hover:bg-bambu-green/10 p-1.5 sm:p-2`,children:(0,G.jsx)(Ml,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:n,disabled:!m(`queue`,`update`,e.created_by_id),title:m(`queue`,`update`,e.created_by_id)?v(`common.edit`):v(`queue.permissions.noEdit`),className:`p-1.5 sm:p-2`,children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:r,disabled:!m(`queue`,`delete`,e.created_by_id),title:m(`queue`,`delete`,e.created_by_id)?v(`common.cancel`):v(`queue.permissions.noCancel`),className:`text-red-600 dark:text-red-400 hover:text-red-700 dark:hover:text-red-300 hover:bg-red-50 dark:hover:bg-red-500/10 p-1.5 sm:p-2`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}),F&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:o,disabled:!p(`queue:create`),title:p(`queue:create`)?v(`queue.actions.requeue`):v(`queue.permissions.noRequeue`),className:`text-bambu-green hover:text-bambu-green/80 hover:bg-bambu-green/10 p-1.5 sm:p-2`,children:(0,G.jsx)(Vl,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:i,disabled:!m(`queue`,`delete`,e.created_by_id),title:m(`queue`,`delete`,e.created_by_id)?v(`common.remove`):v(`queue.permissions.noRemove`),className:`p-1.5 sm:p-2`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})]})]})]})]})}function d8(e){let{row:t,setEditItem:n,setConfirmAction:r,startMutation:i,selectedItems:a,handleToggleSelect:o,timeFormat:s,hasPermission:c,canModify:l,t:u,etaEligibleIds:d,etaNow:f,onMoveUp:p,onMoveDown:m}=e;return t.kind===`item`?(0,G.jsx)(u8,{item:t.item,onEdit:()=>n(t.item),onCancel:()=>r({type:`cancel`,item:t.item}),onRemove:()=>{},onStop:()=>{},onRequeue:()=>{},onStart:()=>i.mutate({id:t.item.id}),onMoveUp:p,onMoveDown:m,timeFormat:s,isSelected:a.includes(t.item.id),onToggleSelect:()=>o(t.item.id),hasPermission:c,canModify:l,showEta:d.has(t.item.id),etaNow:f,t:u}):(0,G.jsx)(WHe,{...e})}function WHe({row:e,collapsed:t,onToggleBatch:n,onUngroup:r,setEditItem:i,setConfirmAction:a,startMutation:o,selectedItems:s,handleToggleSelect:c,timeFormat:l,hasPermission:u,canModify:d,t:f,etaEligibleIds:p,etaNow:m,aggregateForRows:h,onMoveUp:g,onMoveDown:_,onMoveBlock:v}){let y=e,b=u(`queue:reorder`),{attributes:x,listeners:S,setNodeRef:C,transform:w,transition:T,isDragging:E}=G6({id:`batch-${y.batchId}`,disabled:!b}),D={transform:C3.Transform.toString(w),transition:T},O=h([y]),k=y.items.map(e=>e.id),A=k.length>0&&k.every(e=>s.includes(e)),j=new Set(y.items.map(e=>e.status)),M=j.has(`failed`)?`failed`:j.has(`printing`)?`printing`:`pending`,N=y.items.filter(e=>e.status===`pending`).length;return(0,G.jsxs)(`div`,{ref:C,style:D,className:`bg-bambu-dark-secondary rounded-xl border border-l-[3px] border-l-cyan-400 border-bambu-dark-tertiary overflow-hidden ${E?`opacity-50 scale-[1.01] shadow-xl z-50`:``}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 sm:gap-3 p-3 sm:p-4`,children:[b&&(g||_)&&(0,G.jsxs)(`div`,{className:`flex sm:hidden flex-col shrink-0 -my-1`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:g,disabled:!g,title:f(`queue.moveUp`),"aria-label":f(`queue.moveUp`),className:`flex items-center justify-center w-8 h-7 rounded-lg text-bambu-gray hover:text-white hover:bg-bambu-dark disabled:opacity-25 disabled:hover:bg-transparent transition-colors`,children:(0,G.jsx)(gs,{className:`w-5 h-5`})}),(0,G.jsx)(`button`,{type:`button`,onClick:_,disabled:!_,title:f(`queue.moveDown`),"aria-label":f(`queue.moveDown`),className:`flex items-center justify-center w-8 h-7 rounded-lg text-bambu-gray hover:text-white hover:bg-bambu-dark disabled:opacity-25 disabled:hover:bg-transparent transition-colors`,children:(0,G.jsx)(ps,{className:`w-5 h-5`})})]}),(0,G.jsx)(`button`,{onClick:e=>{e.stopPropagation(),k.forEach(e=>{(A&&s.includes(e)||!A&&!s.includes(e))&&c(e)})},className:`hidden sm:flex items-center justify-center w-6 h-6 rounded border transition-colors shrink-0 ${A?`bg-bambu-green border-bambu-green text-white`:`border-white/30 bg-black/30 hover:border-bambu-green/50`}`,title:f(A?`queue.bulkEdit.deselectAll`:`queue.bulkEdit.selectAll`),children:A&&(0,G.jsx)(fs,{className:`w-4 h-4`})}),b&&(0,G.jsx)(`div`,{...x,...S,className:`hidden sm:flex items-center justify-center w-8 h-8 rounded-lg bg-bambu-dark cursor-grab active:cursor-grabbing hover:bg-bambu-dark-tertiary transition-colors touch-none shrink-0`,title:f(`queue.batch.dragGroup`,{defaultValue:`Drag group`}),children:(0,G.jsx)(Ac,{className:`w-4 h-4 text-bambu-gray`})}),(0,G.jsx)(`button`,{onClick:n,className:`flex items-center justify-center w-8 h-8 rounded-lg bg-bambu-dark hover:bg-bambu-dark-tertiary transition-colors shrink-0`,title:f(t?`queue.batch.expand`:`queue.batch.collapse`),children:t?(0,G.jsx)(ms,{className:`w-4 h-4 text-bambu-gray`}):(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray`})}),(0,G.jsx)(`div`,{className:`w-10 h-10 sm:w-12 sm:h-12 flex-shrink-0 bg-bambu-dark rounded-lg flex items-center justify-center`,children:t?(0,G.jsx)(Sl,{className:`w-5 h-5 text-cyan-700 dark:text-cyan-300`}):(0,G.jsx)(xl,{className:`w-5 h-5 text-cyan-700 dark:text-cyan-300`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1`,children:[(0,G.jsx)(`p`,{className:`text-sm sm:text-base text-white font-medium truncate`,children:y.batchName}),(0,G.jsx)(`span`,{className:`flex-shrink-0 px-1.5 py-0.5 text-[10px] sm:text-xs bg-cyan-100 dark:bg-cyan-500/15 text-cyan-700 dark:text-cyan-300 rounded border border-cyan-300 dark:border-cyan-500/30`,children:f(`queue.batch.label`,{count:O.count})})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-x-3 gap-y-1 text-xs sm:text-sm text-bambu-gray`,children:[O.time>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 sm:gap-1.5`,children:[(0,G.jsx)(Mu,{className:`w-3 h-3 sm:w-3.5 sm:h-3.5`}),op(O.time)]}),O.weight>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 sm:gap-1.5`,children:[(0,G.jsx)(Yu,{className:`w-3 h-3 sm:w-3.5 sm:h-3.5`}),s8(O.weight)]}),N>0&&M===`pending`&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 sm:gap-1.5 text-yellow-700 dark:text-yellow-400`,children:[(0,G.jsx)(js,{className:`w-3 h-3 sm:w-3.5 sm:h-3.5`}),f(`queue.batch.pendingCount`,{count:N})]})]})]}),(0,G.jsx)(`div`,{className:`flex items-center gap-1 shrink-0`,children:r&&(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:r,title:f(`queue.batch.ungroup`),className:`text-cyan-700 dark:text-cyan-300 hover:text-cyan-900 dark:hover:text-cyan-200 hover:bg-cyan-50 dark:hover:bg-cyan-500/10 p-1.5 sm:p-2`,children:(0,G.jsx)(Ru,{className:`w-4 h-4`})})})]}),!t&&(0,G.jsx)(`div`,{className:`border-t border-bambu-dark-tertiary bg-black/20 p-2 sm:p-3 space-y-2`,children:y.items.map((e,t)=>(0,G.jsx)(u8,{item:e,onEdit:()=>i(e),onCancel:()=>a({type:`cancel`,item:e}),onRemove:()=>{},onStop:()=>{},onRequeue:()=>{},onStart:()=>o.mutate({id:e.id}),onMoveUp:v&&t>0?()=>v([e.id],y.items[t-1].id,!1):void 0,onMoveDown:v&&t<y.items.length-1?()=>v([e.id],y.items[t+1].id,!0):void 0,timeFormat:l,isSelected:s.includes(e.id),onToggleSelect:()=>c(e.id),hasPermission:u,canModify:d,showEta:p.has(e.id),etaNow:m,t:f},e.id))})]})}function GHe({items:e,visibleCount:t,onShowMore:n,sortBy:r,sortAsc:i,onSortByChange:a,onSortAscToggle:o,onRemove:s,onRequeue:c,timeFormat:l,batchCollapsed:u,toggleBatchCollapsed:d,hasPermission:f,canModify:p,t:m}){if(e.length===0)return(0,G.jsxs)(Ld,{className:`p-12 text-center border-dashed`,children:[(0,G.jsx)(Zc,{className:`w-16 h-16 text-bambu-gray mx-auto mb-4 opacity-50`}),(0,G.jsx)(`h3`,{className:`text-xl font-medium text-white mb-2`,children:m(`queue.history.emptyTitle`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray max-w-md mx-auto`,children:m(`queue.history.emptyDescription`)})]});let h=[],g=new Set;for(let n of e.slice(0,t))if(n.batch_id!=null){if(g.has(n.batch_id))continue;g.add(n.batch_id);let t=e.filter(e=>e.batch_id===n.batch_id);h.push({kind:`batch`,batchId:n.batch_id,batchName:n.batch_name||m(`queue.batch.defaultName`),items:t})}else h.push({kind:`item`,item:n});return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center justify-between gap-2 mb-3 sm:mb-4`,children:[(0,G.jsxs)(`h2`,{className:`text-base sm:text-lg font-semibold text-white flex items-center gap-2`,children:[m(`queue.sections.history`),(0,G.jsxs)(`span`,{className:`text-xs sm:text-sm font-normal text-bambu-gray`,children:[`(`,m(`queue.itemCount`,{count:e.length}),`)`]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`select`,{className:`px-2 sm:px-3 py-1.5 text-xs sm:text-sm bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:r,onChange:e=>a(e.target.value),children:[(0,G.jsx)(`option`,{value:`date`,children:m(`queue.sort.byDate`)}),(0,G.jsx)(`option`,{value:`name`,children:m(`queue.sort.byName`)}),(0,G.jsx)(`option`,{value:`printer`,children:m(`queue.sort.byPrinter`)})]}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:o,title:m(i?`queue.sort.ascendingOldest`:`queue.sort.descendingNewest`),className:`px-2`,children:i?(0,G.jsx)(Ho,{className:`w-4 h-4`}):(0,G.jsx)(Io,{className:`w-4 h-4`})})]})]}),(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 xl:grid-cols-3 gap-2`,children:h.map(e=>{if(e.kind===`item`)return(0,G.jsx)(Q6,{item:e.item,onRemove:()=>s(e.item),onRequeue:()=>c(e.item),timeFormat:l,hasPermission:f,canModify:p,t:m},e.item.id);let t=u[e.batchId]??!0,n=e.items.filter(e=>e.status===`completed`).length,r=e.items.filter(e=>e.status===`failed`).length,i=e.items.filter(e=>e.status===`skipped`).length,a=e.items.filter(e=>e.status===`cancelled`).length,o=e.items.map(e=>e.completed_at||e.created_at).filter(e=>!!e).sort().at(-1);return(0,G.jsxs)(`div`,{className:`md:col-span-2 xl:col-span-3 bg-bambu-dark-secondary rounded-lg border border-bambu-dark-tertiary border-l-[3px] border-l-cyan-400`,children:[(0,G.jsxs)(`button`,{onClick:()=>d(e.batchId),className:`w-full flex items-center gap-2 sm:gap-3 px-3 py-2 hover:bg-bambu-dark/30 transition-colors text-left`,title:m(t?`queue.batch.expand`:`queue.batch.collapse`),children:[t?(0,G.jsx)(ms,{className:`w-4 h-4 text-bambu-gray shrink-0`}):(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray shrink-0`}),t?(0,G.jsx)(Sl,{className:`w-5 h-5 text-cyan-700 dark:text-cyan-300 shrink-0`}):(0,G.jsx)(xl,{className:`w-5 h-5 text-cyan-700 dark:text-cyan-300 shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm text-white font-medium truncate min-w-0 flex-1`,children:e.batchName}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-xs text-bambu-gray shrink-0`,children:[n>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-emerald-700 dark:text-emerald-400`,children:[(0,G.jsx)(xs,{className:`w-3 h-3`}),n]}),r>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-red-700 dark:text-red-400`,children:[(0,G.jsx)(Ds,{className:`w-3 h-3`}),r]}),i>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-orange-700 dark:text-orange-400`,children:[(0,G.jsx)(uu,{className:`w-3 h-3`}),i]}),a>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-gray-400`,children:[(0,G.jsx)(Uo,{className:`w-3 h-3`}),a]}),(0,G.jsx)(`span`,{title:o??void 0,children:o?sp(o,l,m):null})]})]}),!t&&(0,G.jsx)(`div`,{className:`border-t border-bambu-dark-tertiary bg-black/20 p-2 grid grid-cols-1 md:grid-cols-2 xl:grid-cols-3 gap-2`,children:e.items.map(e=>(0,G.jsx)(Q6,{item:e,onRemove:()=>s(e),onRequeue:()=>c(e),timeFormat:l,hasPermission:f,canModify:p,t:m},e.id))})]},`batch-${e.batchId}`)})}),e.length>t&&(0,G.jsxs)(`div`,{className:`mt-4 flex flex-col items-center gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:n,children:m(`queue.history.showMore`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:m(`queue.history.showingCount`,{shown:Math.min(t,e.length),total:e.length})})]})]})}var f8=50;function KHe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),{hasPermission:r,hasAnyPermission:i,canModify:a}=jd(),[o,s]=(0,y.useState)(null),[c,l]=(0,y.useState)(``),[u,d]=(0,y.useState)(``),[f,p]=(0,y.useState)(!1),[m,h]=(0,y.useState)(null),[g,_]=(0,y.useState)(null),[v,b]=(0,y.useState)(null),[x,S]=(0,y.useState)([]),[C,w]=(0,y.useState)(!1),[T,E]=(0,y.useState)(null),[D,O]=(0,y.useState)(()=>localStorage.getItem(`queue.historySortBy`)||`date`),[k,A]=(0,y.useState)(()=>{let e=localStorage.getItem(`queue.historySortAsc`);return e===null?!1:e===`true`}),[j,M]=(0,y.useState)(f8),[N,P]=(0,y.useState)(()=>localStorage.getItem(`queue.pendingSortBy`)||`position`),[F,I]=(0,y.useState)(()=>{let e=localStorage.getItem(`queue.pendingSortAsc`);return e===null?!0:e===`true`}),[L,R]=(0,y.useState)(()=>{let e=new URLSearchParams(window.location.search).get(`tab`);if(e===`pipelines`||e===`history`||e===`timeline`||e===`queue`||e===`batches`)return e;let t=localStorage.getItem(`queue.activeTab`);return t===`history`||t===`timeline`||t===`pipelines`||t===`batches`?t:`queue`}),[z,B]=(0,y.useState)(()=>localStorage.getItem(`queue.activeLayout`)===`printer`?`printer`:`position`),[V,ee]=(0,y.useState)(()=>{try{let e=localStorage.getItem(`queue.batchCollapsed`);return e?JSON.parse(e):{}}catch{return{}}}),[te,ne]=(0,y.useState)(null),[re,ie]=(0,y.useState)(!1),[ae,oe]=(0,y.useState)(null);(0,y.useEffect)(()=>{localStorage.setItem(`queue.historySortBy`,D)},[D]),(0,y.useEffect)(()=>{localStorage.setItem(`queue.historySortAsc`,String(k))},[k]),(0,y.useEffect)(()=>{M(f8)},[D,k,u]),(0,y.useEffect)(()=>{localStorage.setItem(`queue.pendingSortBy`,N)},[N]),(0,y.useEffect)(()=>{localStorage.setItem(`queue.pendingSortAsc`,String(F))},[F]),(0,y.useEffect)(()=>{localStorage.setItem(`queue.activeTab`,L)},[L]),(0,y.useEffect)(()=>{localStorage.setItem(`queue.activeLayout`,z)},[z]),(0,y.useEffect)(()=>{localStorage.setItem(`queue.batchCollapsed`,JSON.stringify(V))},[V]);let se=k3(O3(l6,{activationConstraint:{distance:8}}),O3(a6,{coordinateGetter:q6})),{data:H}=K({queryKey:[`settings`],queryFn:Z.getSettings}),ce=H?.time_format||`system`,{data:le}=K({queryKey:[`batches`,`active`],queryFn:()=>Z.getBatches(`active`)}),ue=le?.length??0,{data:de,isLoading:fe}=K({queryKey:[`queue`,o,c],queryFn:()=>Z.getQueue(o||void 0,c||void 0),refetchInterval:5e3}),{data:pe}=K({queryKey:[`printers`],queryFn:()=>Z.getPrinters()}),me=q({mutationFn:e=>Z.updateSettings({queue_shortest_first:e}),onSuccess:()=>{t.invalidateQueries({queryKey:[`settings`]})}}),he=q({mutationFn:e=>Z.cancelQueueItem(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`queue`]}),n(e(`queue.toast.cancelled`))},onError:()=>n(e(`queue.toast.cancelFailed`),`error`)}),ge=q({mutationFn:e=>Z.removeFromQueue(e),onSuccess:r=>{t.invalidateQueries({queryKey:[`queue`]}),t.invalidateQueries({queryKey:[`batches`]}),n(r.deleted===!1?e(`queue.toast.keptForOrder`):e(`queue.toast.removed`))},onError:()=>n(e(`queue.toast.removeFailed`),`error`)}),_e=q({mutationFn:e=>Z.stopQueueItem(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`queue`]}),n(e(`queue.toast.stopped`))},onError:()=>n(e(`queue.toast.stopFailed`),`error`)}),[ve,ye]=(0,y.useState)(null),be=q({mutationFn:({id:e,skipFilamentCheck:t})=>Z.startQueueItem(e,{skipFilamentCheck:t}),onSuccess:()=>{t.invalidateQueries({queryKey:[`queue`]}),n(e(`queue.toast.released`)),ye(null)},onError:(t,r)=>{if(t instanceof od&&t.status===409&&t.code===`insufficient_filament`){let e=t.detail?.deficit??[];ye({itemId:r.id,deficit:e});return}n(e(`queue.toast.startFailed`),`error`)}}),xe=q({mutationFn:e=>Z.reorderQueue(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`queue`]})},onError:()=>n(e(`queue.toast.reorderFailed`),`error`)}),Se=q({mutationFn:async()=>{let e=de?.filter(e=>[`completed`,`failed`,`skipped`,`cancelled`].includes(e.status))||[],t=0,n=0;for(let r of e)(await Z.removeFromQueue(r.id)).deleted===!1?n+=1:t+=1;return{cleared:t,kept:n}},onSuccess:({cleared:r,kept:i})=>{t.invalidateQueries({queryKey:[`queue`]}),t.invalidateQueries({queryKey:[`batches`]}),n(i>0?`${e(`queue.toast.historyCleared`,{count:r})} ${e(`queue.toast.historyKeptForOrders`,{kept:i})}`:e(`queue.toast.historyCleared`,{count:r}))},onError:()=>n(e(`queue.toast.clearHistoryFailed`),`error`)}),Ce=q({mutationFn:e=>Z.bulkUpdateQueue(e),onSuccess:e=>{t.invalidateQueries({queryKey:[`queue`]}),S([]),w(!1),n(e.message)},onError:()=>n(e(`queue.toast.updateFailed`),`error`)}),we=q({mutationFn:async e=>{for(let t of e)await Z.cancelQueueItem(t);return e.length},onSuccess:r=>{t.invalidateQueries({queryKey:[`queue`]}),S([]),n(e(`queue.toast.bulkCancelled`,{count:r}))},onError:()=>n(e(`queue.toast.bulkCancelFailed`),`error`)}),Te=q({mutationFn:e=>Z.resumeQueueAfterFailure(e),onSuccess:r=>{t.invalidateQueries({queryKey:[`queue`]}),E(null),n(e(`queue.toast.resumedAfterFailure`,{restored:r.restored,acknowledged:r.acknowledged}))},onError:()=>n(e(`queue.toast.resumeAfterFailureFailed`),`error`)}),Ee=q({mutationFn:e=>Z.createBatch(e),onSuccess:r=>{t.invalidateQueries({queryKey:[`queue`]}),S([]),ie(!1),ee(e=>({...e,[r.id]:!1})),n(e(`queue.toast.batchCreated`,{name:r.name}))},onError:()=>n(e(`queue.toast.batchCreateFailed`),`error`)}),De=q({mutationFn:e=>Z.ungroupBatch(e),onSuccess:r=>{t.invalidateQueries({queryKey:[`queue`]}),oe(null),n(e(`queue.toast.batchUngrouped`,{count:r.ungrouped_count}))},onError:()=>n(e(`queue.toast.batchUngroupFailed`),`error`)}),Oe=e=>{S(t=>t.includes(e)?t.filter(t=>t!==e):[...t,e])},ke=(0,y.useMemo)(()=>{let e=new Set;return pe?.forEach(t=>{t.location&&e.add(t.location)}),de?.forEach(t=>{t.target_location&&e.add(t.target_location)}),Array.from(e).sort()},[pe,de]),Ae=(0,y.useCallback)(e=>u?e.target_location?e.target_location===u:e.printer_id?pe?.find(t=>t.id===e.printer_id)?.location===u:!1:!0,[u,pe]),je=(0,y.useMemo)(()=>{let e=de?.filter(e=>e.status===`pending`)||[];u&&(e=e.filter(Ae));let t=e=>{if(!e.scheduled_time)return 0;let t=ep(e.scheduled_time)?.getTime()??0;return t>Date.now()+4320*60*60*1e3?0:t};return H?.queue_shortest_first?[...e].sort((e,t)=>NHe(e,t,!0)):[...e].sort((e,n)=>{let r;if(N===`name`){let t=e.archive_name||e.library_file_name||``,i=n.archive_name||n.library_file_name||``;r=t.localeCompare(i)}else r=N===`printer`?(e.printer_name||``).localeCompare(n.printer_name||``):N===`time`?t(e)-t(n):e.position-n.position;return F?r:-r})},[de,N,F,Ae,u,H?.queue_shortest_first]),Me=()=>{let e=je.map(e=>e.id);x.length===e.length?S([]):S(e)},Ne=(0,y.useMemo)(()=>{let e=de?.filter(e=>e.status===`printing`)||[];return u&&(e=e.filter(Ae)),e},[de,u,Ae]),Pe=(0,y.useMemo)(()=>{let e=new Set;if(!de)return e;let t=new Set;de.forEach(e=>{e.status===`printing`&&e.printer_id&&t.add(e.printer_id)});let n=e=>e.scheduled_time?(ep(e.scheduled_time)?.getTime()??0)>Date.now():!1,r=(e,t)=>e8(e,t,H?.queue_shortest_first??!1),i=new Map;return de.filter(e=>e.status===`pending`&&e.printer_id!=null&&!e.manual_start&&!n(e)).sort(r).forEach(e=>{let t=i.get(e.printer_id)??[];t.push(e),i.set(e.printer_id,t)}),de.forEach(r=>{if(r.status===`pending`&&!r.waiting_reason&&!n(r)&&!(r.print_time_seconds==null||r.print_time_seconds<=0)&&!r.require_previous_success){if(r.printer_id==null){e.add(r.id);return}if(!t.has(r.printer_id)){if(r.manual_start){e.add(r.id);return}i.get(r.printer_id)?.[0]?.id===r.id&&e.add(r.id)}}}),e},[de,H?.queue_shortest_first]),[Fe,Ie]=(0,y.useState)(()=>Date.now()),Le=Pe.size>0;(0,y.useEffect)(()=>{if(!Le)return;Ie(Date.now());let e=setInterval(()=>Ie(Date.now()),3e4);return()=>clearInterval(e)},[Le]);let Re=(0,y.useMemo)(()=>{let e=new Set;return Ne.forEach(t=>{t.printer_id&&e.add(t.printer_id)}),Array.from(e)},[Ne]),ze=Co({queries:Re.map(e=>({queryKey:[`printerStatus`,e],queryFn:()=>Z.getPrinterStatus(e),refetchInterval:5e3}))}),Be=(0,y.useMemo)(()=>{let e={};return Re.forEach((t,n)=>{let r=ze[n];r?.data?.state&&(e[t]=r.data.state)}),e},[Re,ze]),Ve=(0,y.useMemo)(()=>{let e={};return Re.forEach((t,n)=>{let r=ze[n];r?.data&&(e[t]={progress:r.data.progress??void 0,remaining_time:r.data.remaining_time??void 0,state:r.data.state??void 0})}),e},[Re,ze]),He=(0,y.useMemo)(()=>{let e=de?.filter(e=>[`completed`,`failed`,`skipped`,`cancelled`].includes(e.status))||[];return u&&(e=e.filter(Ae)),[...e].sort((e,t)=>{let n;if(D===`name`){let r=e.archive_name||e.library_file_name||``,i=t.archive_name||t.library_file_name||``;n=r.localeCompare(i)}else n=D===`printer`?(e.printer_name||``).localeCompare(t.printer_name||``):(ep(t.completed_at||t.created_at)?.getTime()??0)-(ep(e.completed_at||e.created_at)?.getTime()??0);return k?-n:n})},[de,D,k,Ae,u]),Ue=(0,y.useMemo)(()=>je.reduce((e,t)=>e+(t.print_time_seconds||0),0),[je]),We=(0,y.useMemo)(()=>je.reduce((e,t)=>e+(t.filament_used_grams||0),0),[je]),Ge=e=>{let t=e.active.id;ne(typeof t==`number`||typeof t==`string`?t:null)},Ke=e=>{let{active:t,over:n}=e;if(ne(null),!n||t.id===n.id)return;let r,i=t.id;if(typeof i==`string`&&i.startsWith(`batch-`)){let e=Number(i.slice(6));r=je.filter(t=>t.batch_id===e).map(e=>e.id)}else{let e=i;r=x.includes(e)&&x.length>1?x.slice().sort((e,t)=>je.findIndex(t=>t.id===e)-je.findIndex(e=>e.id===t)):[e]}if(r.length===0)return;let a,o=n.id;if(typeof o==`string`&&o.startsWith(`batch-`)){let e=Number(o.slice(6));a=je.findIndex(t=>t.batch_id===e)}else a=je.findIndex(e=>e.id===o);if(a===-1)return;let s=je[a],c=je.filter(e=>!r.includes(e.id)),l=c.findIndex(e=>e.id===s.id);l===-1&&(l=a),je.findIndex(e=>e.id===r[0])<a&&(l+=1);let u=[...c.slice(0,l),...r.map(e=>je.find(t=>t.id===e)).filter(e=>!!e),...c.slice(l)].map((e,t)=>({id:e.id,position:t+1}));xe.mutate(u)},qe=(0,y.useMemo)(()=>{let t=[],n=new Set;for(let r of je)if(r.batch_id!=null){if(n.has(r.batch_id))continue;n.add(r.batch_id);let i=je.filter(e=>e.batch_id===r.batch_id);t.push({kind:`batch`,batchId:r.batch_id,batchName:r.batch_name||e(`queue.batch.defaultName`),items:i})}else t.push({kind:`item`,item:r});return t},[je,e]),Je=r(`queue:reorder`)&&N===`position`&&!H?.queue_shortest_first,Ye=e=>e.kind===`item`?[e.item.id]:e.items.map(e=>e.id),Xe=(e,t,n)=>{let r=je.filter(t=>!e.includes(t.id)),i=r.findIndex(e=>e.id===t);if(i===-1)return;n&&(i+=1);let a=e.map(e=>je.find(t=>t.id===e)).filter(e=>!!e),o=[...r.slice(0,i),...a,...r.slice(i)];xe.mutate(o.map((e,t)=>({id:e.id,position:t+1})))},Ze=(e,t)=>{if(!Je)return{};let n=Ye(e[t]);return{onMoveUp:t>0?()=>Xe(n,Ye(e[t-1])[0],!1):void 0,onMoveDown:t<e.length-1?()=>{let r=Ye(e[t+1]);Xe(n,r[r.length-1],!0)}:void 0}},Qe=(0,y.useMemo)(()=>{let e=[];for(let t of qe)if(t.kind===`item`)e.push(t.item.id);else if(e.push(`batch-${t.batchId}`),!(V[t.batchId]??!0))for(let n of t.items)e.push(n.id);return e},[qe,V]),$e=(0,y.useMemo)(()=>x.length<2?!1:x.every(e=>{let t=je.find(t=>t.id===e);return t&&t.batch_id==null}),[x,je]),et=e=>{ee(t=>({...t,[e]:!(t[e]??!0)}))},tt=(0,y.useMemo)(()=>{let t=new Map,n=t=>{if(t.printer_id)return{key:`printer:${t.printer_id}`,label:t.printer_name||`Printer #${t.printer_id}`,printerId:t.printer_id,targetModel:null,isUnassigned:!1};if((t.variants?.length??0)>1){let n=t.variants.map(e=>e.target_model).join(` / `);return{key:`models:${n}`,label:`${e(`queue.filter.any`)} ${n}`,printerId:null,targetModel:null,isUnassigned:!1}}return t.target_model?{key:`model:${t.target_model}`,label:`${e(`queue.filter.any`)} ${t.target_model}`,printerId:null,targetModel:t.target_model,isUnassigned:!1}:{key:`unassigned`,label:e(`queue.filter.unassigned`),printerId:null,targetModel:null,isUnassigned:!0}};for(let e of qe){let r=e.kind===`item`?e.item:e.items[0];if(!r)continue;let i=n(r);t.has(i.key)||t.set(i.key,{...i,rows:[]}),t.get(i.key).rows.push(e)}return Array.from(t.values()).sort((e,t)=>e.isUnassigned&&!t.isUnassigned?1:!e.isUnassigned&&t.isUnassigned?-1:e.label.localeCompare(t.label))},[qe,e]),nt=(0,y.useMemo)(()=>{let e=new Map;return de?.forEach(t=>{if(t.status===`skipped`&&t.error_message===`Previous print failed or was aborted`&&t.printer_id){let n=e.get(t.printer_id);n?n.count+=1:e.set(t.printer_id,{name:t.printer_name||`Printer #${t.printer_id}`,count:1})}}),Array.from(e.entries()).map(([e,{name:t,count:n}])=>({printerId:e,printerName:t,skippedCount:n})).sort((e,t)=>e.printerName.localeCompare(t.printerName))},[de]),rt=e=>{let t=0,n=0,r=0;for(let i of e){let e=i.kind===`item`?[i.item]:i.items;for(let i of e)t+=1,n+=i.print_time_seconds||0,r+=i.filament_used_grams||0}return{count:t,time:n,weight:r}};return(0,G.jsxs)(`div`,{className:`p-4 md:p-8`,children:[(0,G.jsx)(`div`,{className:`flex items-center justify-between mb-6`,children:(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(Zc,{className:`w-7 h-7 text-bambu-green`}),e(`queue.title`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:e(`queue.subtitle`)})]})}),(0,G.jsx)(`div`,{className:`flex gap-1 border-b border-bambu-dark-tertiary mb-6 overflow-x-auto`,children:[{id:`queue`,label:e(`queue.tabs.queue`),icon:js,count:je.length+Ne.length},{id:`batches`,label:e(`queue.tabs.batches`),icon:Sl,count:ue},{id:`history`,label:e(`queue.tabs.history`),icon:Zc,count:He.length},{id:`timeline`,label:e(`queue.tabs.timeline`),icon:ds,count:null},{id:`pipelines`,label:e(`queue.tabs.pipelines`),icon:$u,count:null}].map(({id:e,label:t,icon:n,count:r})=>(0,G.jsxs)(`button`,{onClick:()=>R(e),className:`px-4 py-2.5 text-sm flex items-center gap-2 border-b-2 -mb-px transition-colors whitespace-nowrap ${L===e?`text-white border-bambu-green font-medium`:`text-bambu-gray border-transparent hover:text-white`}`,children:[(0,G.jsx)(n,{className:`w-4 h-4`}),t,r!==null&&r>0&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded-full ${L===e?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:r})]},e))}),L!==`pipelines`&&L!==`batches`&&(0,G.jsx)(jHe,{activeCount:Ne.length,pendingCount:je.length,totalTime:Ue,totalWeight:We,historyCount:He.length,t:e}),L===`queue`&&nt.length>0&&r(`queue:update_all`)&&(0,G.jsx)(`div`,{className:`mb-4 space-y-2`,children:nt.map(({printerId:t,printerName:n,skippedCount:r})=>(0,G.jsxs)(`div`,{className:`flex items-center gap-3 px-4 py-3 bg-orange-50 dark:bg-orange-500/10 border border-orange-300 dark:border-orange-500/30 rounded-lg`,children:[(0,G.jsx)(ys,{className:`w-5 h-5 text-orange-600 dark:text-orange-400 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-sm text-orange-800 dark:text-orange-200`,children:e(`queue.resumeAfterFailure.banner`,{printer:n,count:r})}),(0,G.jsx)(`div`,{className:`text-xs text-orange-800/80 dark:text-orange-200/70 mt-0.5`,children:e(`queue.resumeAfterFailure.bannerHint`)})]}),(0,G.jsxs)(`button`,{onClick:()=>E({printerId:t,printerName:n,skippedCount:r}),className:`flex items-center gap-1.5 px-3 py-1.5 bg-orange-100 dark:bg-orange-500/20 hover:bg-orange-200 dark:hover:bg-orange-500/30 text-orange-900 dark:text-orange-100 text-sm rounded-md border border-orange-300 dark:border-orange-500/40 transition-colors flex-shrink-0`,children:[(0,G.jsx)(Ts,{className:`w-4 h-4`}),e(`queue.resumeAfterFailure.button`)]})]},t))}),L!==`pipelines`&&L!==`batches`&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 sm:gap-4 mb-6`,children:[(0,G.jsxs)(`select`,{className:`px-2 sm:px-3 py-2 text-sm sm:text-base bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none min-w-0 flex-1 sm:flex-none`,value:o===-1?`unassigned`:o||``,onChange:e=>{let t=e.target.value;s(t===`unassigned`?-1:t===``?null:Number(t))},children:[(0,G.jsx)(`option`,{value:``,children:e(`queue.filter.allPrinters`)}),(0,G.jsx)(`option`,{value:`unassigned`,children:e(`queue.filter.unassigned`)}),pe?.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]}),(0,G.jsxs)(`select`,{className:`px-2 sm:px-3 py-2 text-sm sm:text-base bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none min-w-0 flex-1 sm:flex-none`,value:c,onChange:e=>l(e.target.value),children:[(0,G.jsx)(`option`,{value:``,children:e(`queue.filter.allStatus`)}),(0,G.jsx)(`option`,{value:`pending`,children:e(`queue.status.pending`)}),(0,G.jsx)(`option`,{value:`printing`,children:e(`queue.status.printing`)}),(0,G.jsx)(`option`,{value:`completed`,children:e(`queue.status.completed`)}),(0,G.jsx)(`option`,{value:`failed`,children:e(`queue.status.failed`)}),(0,G.jsx)(`option`,{value:`skipped`,children:e(`queue.status.skipped`)}),(0,G.jsx)(`option`,{value:`cancelled`,children:e(`queue.status.cancelled`)})]}),ke.length>0&&(0,G.jsxs)(`select`,{className:`px-2 sm:px-3 py-2 text-sm sm:text-base bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none min-w-0 flex-1 sm:flex-none`,value:u,onChange:e=>d(e.target.value),children:[(0,G.jsx)(`option`,{value:``,children:e(`queue.filter.allLocations`)}),ke.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]}),(0,G.jsx)(`div`,{className:`hidden sm:block flex-1`}),L===`history`&&He.length>0&&(0,G.jsxs)(Q,{className:`w-full sm:w-auto`,variant:`secondary`,size:`sm`,onClick:()=>p(!0),disabled:!r(`queue:delete_all`),title:r(`queue:delete_all`)?void 0:e(`queue.permissions.noClearHistory`),children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),e(`queue.clearHistory`)]})]}),L===`queue`&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-3 mb-6`,children:[(0,G.jsxs)(`div`,{className:`inline-flex items-center bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg p-0.5`,children:[(0,G.jsxs)(`button`,{className:`px-3 py-1.5 text-xs sm:text-sm rounded-md transition-colors flex items-center gap-1.5 ${z===`position`?`bg-bambu-dark-tertiary text-white`:`text-bambu-gray hover:text-white`}`,onClick:()=>B(`position`),title:e(`queue.layout.flatList`),children:[(0,G.jsx)($c,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`queue.layout.flatList`)})]}),(0,G.jsxs)(`button`,{className:`px-3 py-1.5 text-xs sm:text-sm rounded-md transition-colors flex items-center gap-1.5 ${z===`printer`?`bg-bambu-dark-tertiary text-white`:`text-bambu-gray hover:text-white`}`,onClick:()=>B(`printer`),title:e(`queue.layout.groupByPrinter`),children:[(0,G.jsx)(Ll,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`queue.layout.byPrinter`)})]})]}),(0,G.jsxs)(`button`,{onClick:()=>{let e=!(H?.queue_shortest_first??!1);me.mutate(e)},className:`flex items-center gap-1 px-2 py-1.5 text-xs rounded-lg border transition-colors ${H?.queue_shortest_first?`bg-bambu-green/20 border-bambu-green text-bambu-green`:`bg-bambu-dark-secondary border-bambu-dark-tertiary text-bambu-gray hover:text-white hover:border-bambu-gray`}`,title:e(`queue.sjf.tooltip`,`Shortest Job First — scheduler prioritizes shorter prints`),children:[(0,G.jsx)(mu,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`queue.sjf.label`,`SJF`)}),(0,G.jsx)(`span`,{className:`w-1.5 h-1.5 rounded-full ${H?.queue_shortest_first?`bg-bambu-green`:`bg-bambu-gray`}`})]})]}),L===`pipelines`?(0,G.jsx)(EHe,{}):L===`batches`?(0,G.jsx)(zHe,{hasPermission:r,t:e}):fe?(0,G.jsx)(`div`,{className:`text-center py-12 text-bambu-gray`,children:e(`common.loading`)}):de?.length===0?(0,G.jsxs)(Ld,{className:`p-12 text-center border-dashed`,children:[(0,G.jsx)(as,{className:`w-16 h-16 text-bambu-gray mx-auto mb-4 opacity-50`}),(0,G.jsx)(`h3`,{className:`text-xl font-medium text-white mb-2`,children:e(`queue.empty.title`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray max-w-md mx-auto`,children:e(`queue.empty.description`)})]}):L===`timeline`?(0,G.jsx)(RHe,{queueItems:de||[],printers:pe||[],printerStatuses:Ve,sjfEnabled:H?.queue_shortest_first??!1,onItemClick:e=>{[`completed`,`failed`,`skipped`,`cancelled`].includes(e.status)?_(e):e.status===`pending`?h(e):e.status===`printing`&&b({type:`stop`,item:e})},t:e}):L===`history`?(0,G.jsx)(GHe,{items:He,collapsed:!1,visibleCount:j,onShowMore:()=>M(e=>e+f8),sortBy:D,sortAsc:k,onSortByChange:O,onSortAscToggle:()=>A(!k),onRemove:e=>b({type:`remove`,item:e}),onRequeue:_,timeFormat:ce,batchCollapsed:V,toggleBatchCollapsed:et,hasPermission:r,canModify:a,t:e}):(0,G.jsxs)(`div`,{className:`space-y-6 sm:space-y-8`,children:[Ne.length>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h2`,{className:`text-base sm:text-lg font-semibold text-white mb-3 sm:mb-4 flex items-center gap-2`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full bg-blue-400 animate-pulse`}),e(`queue.sections.currentlyPrinting`)]}),(0,G.jsx)(`div`,{className:`space-y-2 sm:space-y-3`,children:Ne.map(t=>(0,G.jsx)(u8,{item:t,onEdit:()=>{},onCancel:()=>{},onRemove:()=>{},onStop:()=>b({type:`stop`,item:t}),onRequeue:()=>{},onStart:()=>{},timeFormat:ce,hasPermission:r,canModify:a,printerState:t.printer_id?Be[t.printer_id]:null,t:e},t.id))})]}),je.length>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center justify-between gap-2 mb-3 sm:mb-4`,children:[(0,G.jsxs)(`h2`,{className:`text-base sm:text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(js,{className:`w-4 h-4 sm:w-5 sm:h-5 text-yellow-600 dark:text-yellow-400`}),e(`queue.sections.queued`),(0,G.jsxs)(`span`,{className:`text-xs sm:text-sm font-normal text-bambu-gray`,children:[`(`,e(`queue.itemCount`,{count:je.length}),`)`]}),(0,G.jsx)(`span`,{className:`hidden sm:inline text-xs text-bambu-gray ml-2`,title:e(`queue.reorderHint`),children:e(`queue.dragToReorder`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`select`,{className:`px-2 sm:px-3 py-1.5 text-xs sm:text-sm bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:N,onChange:e=>P(e.target.value),children:[(0,G.jsx)(`option`,{value:`position`,children:e(`queue.sort.byPosition`)}),(0,G.jsx)(`option`,{value:`name`,children:e(`queue.sort.byName`)}),(0,G.jsx)(`option`,{value:`printer`,children:e(`queue.sort.byPrinter`)}),(0,G.jsx)(`option`,{value:`time`,children:e(`queue.sort.bySchedule`)})]}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>I(!F),title:e(F?`common.ascending`:`common.descending`),className:`px-2`,children:F?(0,G.jsx)(Ho,{className:`w-4 h-4`}):(0,G.jsx)(Io,{className:`w-4 h-4`})})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 sm:gap-3 mb-3 sm:mb-4 p-2 sm:p-3 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:Me,className:`flex items-center gap-1.5 sm:gap-2 text-xs sm:text-sm`,children:[x.length===je.length&&je.length>0?(0,G.jsx)(_u,{className:`w-4 h-4 text-bambu-green`}):(0,G.jsx)(yu,{className:`w-4 h-4`}),x.length===je.length&&je.length>0?e(`queue.bulkEdit.deselectAll`):e(`queue.bulkEdit.selectAll`)]}),x.length>0&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{className:`text-xs sm:text-sm text-bambu-gray`,children:e(`queue.bulkEdit.selected`,{count:x.length})}),(0,G.jsx)(`div`,{className:`hidden sm:block h-4 w-px bg-bambu-dark-tertiary`}),$e&&(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:()=>ie(!0),className:`flex items-center gap-1.5 sm:gap-2 text-xs sm:text-sm text-cyan-700 dark:text-cyan-300 hover:text-cyan-900 dark:hover:text-cyan-200`,title:e(`queue.batch.groupAsBatch`),children:[(0,G.jsx)(Sl,{className:`w-3.5 h-3.5 sm:w-4 sm:h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`queue.batch.groupAsBatch`)})]}),(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:()=>w(!0),className:`flex items-center gap-1.5 sm:gap-2 text-xs sm:text-sm text-bambu-green hover:text-bambu-green-light`,disabled:!i(`queue:update_own`,`queue:update_all`),title:i(`queue:update_own`,`queue:update_all`)?e(`queue.bulkEdit.editSelected`):e(`queue.permissions.noEditItems`),children:[(0,G.jsx)(kl,{className:`w-3.5 h-3.5 sm:w-4 sm:h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`queue.bulkEdit.editSelected`)})]}),(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:()=>we.mutate(x),className:`flex items-center gap-1.5 sm:gap-2 text-xs sm:text-sm text-red-600 dark:text-red-400 hover:text-red-700 dark:hover:text-red-300`,disabled:we.isPending||!i(`queue:delete_own`,`queue:delete_all`),title:i(`queue:delete_own`,`queue:delete_all`)?e(`queue.bulkEdit.cancelSelected`):e(`queue.permissions.noCancelItems`),children:[(0,G.jsx)(td,{className:`w-3.5 h-3.5 sm:w-4 sm:h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`queue.bulkEdit.cancelSelected`)})]})]})]}),(0,G.jsxs)(N6,{sensors:se,collisionDetection:I3,onDragStart:Ge,onDragEnd:Ke,children:[(0,G.jsx)(U6,{items:Qe,strategy:mHe,children:z===`position`?(0,G.jsx)(`div`,{className:`space-y-2 sm:space-y-3`,children:qe.map((t,n)=>(0,G.jsx)(d8,{row:t,collapsed:t.kind===`batch`?V[t.batchId]??!0:!1,onToggleBatch:t.kind===`batch`?()=>et(t.batchId):void 0,onUngroup:t.kind===`batch`?()=>oe(t.batchId):void 0,setEditItem:h,setConfirmAction:b,startMutation:be,selectedItems:x,handleToggleSelect:Oe,timeFormat:ce,hasPermission:r,canModify:a,t:e,etaEligibleIds:Pe,etaNow:Fe,aggregateForRows:rt,...Ze(qe,n),onMoveBlock:Je?Xe:void 0},t.kind===`item`?`item-${t.item.id}`:`batch-${t.batchId}`))}):(0,G.jsx)(`div`,{className:`space-y-4`,children:tt.map(t=>{let n=rt(t.rows);return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-t-lg`,children:[(0,G.jsx)(Ll,{className:`w-4 h-4 ${t.isUnassigned?`text-orange-600 dark:text-orange-400`:t.targetModel?`text-blue-600 dark:text-blue-400`:`text-bambu-green`}`}),(0,G.jsx)(`span`,{className:`font-semibold text-white text-sm`,children:t.label}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray flex flex-wrap gap-x-3`,children:[(0,G.jsx)(`span`,{children:e(`queue.itemCount`,{count:n.count})}),n.time>0&&(0,G.jsx)(`span`,{children:op(n.time)}),n.weight>0&&(0,G.jsx)(`span`,{children:s8(n.weight)})]})]}),(0,G.jsx)(`div`,{className:`bg-bambu-dark/40 border border-t-0 border-bambu-dark-tertiary rounded-b-lg p-2 space-y-2`,children:t.rows.map((n,i)=>(0,G.jsx)(d8,{row:n,collapsed:n.kind===`batch`?V[n.batchId]??!0:!1,onToggleBatch:n.kind===`batch`?()=>et(n.batchId):void 0,onUngroup:n.kind===`batch`?()=>oe(n.batchId):void 0,setEditItem:h,setConfirmAction:b,startMutation:be,selectedItems:x,handleToggleSelect:Oe,timeFormat:ce,hasPermission:r,canModify:a,t:e,etaEligibleIds:Pe,etaNow:Fe,aggregateForRows:rt,...Ze(t.rows,i),onMoveBlock:Je?Xe:void 0},n.kind===`item`?`item-${n.item.id}`:`batch-${n.batchId}`))})]},t.key)})})}),(0,G.jsx)(uHe,{children:(()=>{if(te===null)return null;if(typeof te==`string`&&te.startsWith(`batch-`)){let t=Number(te.slice(6)),n=je.filter(e=>e.batch_id===t);if(n.length===0)return null;let r=n[0].batch_name||e(`queue.batch.defaultName`);return(0,G.jsxs)(`div`,{className:`flex items-center gap-3 px-3 py-2 bg-bambu-dark-secondary border-2 border-cyan-400 rounded-lg shadow-2xl`,children:[(0,G.jsx)(Sl,{className:`w-4 h-4 text-cyan-700 dark:text-cyan-300`}),(0,G.jsx)(`span`,{className:`text-sm text-white font-medium`,children:e(`queue.dragGhost.batch`,{defaultValue:`{{name}} ({{count}} copies)`,name:r,count:n.length})})]})}return typeof te==`number`&&x.includes(te)&&x.length>1?(0,G.jsxs)(`div`,{className:`flex items-center gap-3 px-3 py-2 bg-bambu-dark-secondary border-2 border-cyan-400 rounded-lg shadow-2xl`,children:[(0,G.jsx)(Sl,{className:`w-4 h-4 text-cyan-700 dark:text-cyan-300`}),(0,G.jsx)(`span`,{className:`text-sm text-white font-medium`,children:e(`queue.dragGhost.multiCount`,{count:x.length})})]}):null})()})]})]})]}),m&&(0,G.jsx)(WW,{mode:`edit-queue-item`,archiveId:m.archive_id??void 0,libraryFileId:m.library_file_id??void 0,archiveName:LT(m,t=>e(`common.plusNMore`,{count:t})),queueItem:m,onClose:()=>h(null)}),g&&(0,G.jsx)(WW,{mode:`create`,archiveId:g.archive_id??void 0,libraryFileId:g.library_file_id??void 0,archiveName:LT(g,t=>e(`common.plusNMore`,{count:t})),onClose:()=>_(null)}),ve&&(0,G.jsx)(rf,{title:e(`queue.filamentShort.confirmTitle`),message:e(`queue.filamentShort.confirmIntro`)+`
+      `,onClick:L?()=>{window.innerWidth<640&&f()}:void 0,children:[L&&d&&(0,G.jsx)(`div`,{className:`sm:hidden absolute left-0 top-3 bottom-3 w-1 rounded-full bg-bambu-green`}),(0,G.jsxs)(`div`,{className:`flex items-start sm:items-center gap-2 sm:gap-4 p-3 sm:p-4`,children:[P&&(c||l)&&(0,G.jsxs)(`div`,{className:`flex sm:hidden flex-col shrink-0 -my-1`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(`button`,{type:`button`,onClick:c,disabled:!c,title:v(`queue.moveUp`),"aria-label":v(`queue.moveUp`),className:`flex items-center justify-center w-8 h-7 rounded-lg text-bambu-gray hover:text-white hover:bg-bambu-dark disabled:opacity-25 disabled:hover:bg-transparent transition-colors`,children:(0,G.jsx)(gs,{className:`w-5 h-5`})}),(0,G.jsx)(`button`,{type:`button`,onClick:l,disabled:!l,title:v(`queue.moveDown`),"aria-label":v(`queue.moveDown`),className:`flex items-center justify-center w-8 h-7 rounded-lg text-bambu-gray hover:text-white hover:bg-bambu-dark disabled:opacity-25 disabled:hover:bg-transparent transition-colors`,children:(0,G.jsx)(ps,{className:`w-5 h-5`})})]}),P&&f&&(0,G.jsx)(`button`,{onClick:e=>{e.stopPropagation(),f()},className:`hidden sm:flex items-center justify-center w-6 h-6 rounded border transition-colors shrink-0 ${d?`bg-bambu-green border-bambu-green text-white`:`border-white/30 bg-black/30 hover:border-bambu-green/50`}`,children:d&&(0,G.jsx)(fs,{className:`w-4 h-4`})}),P?(0,G.jsx)(`div`,{...E,...D,className:`hidden sm:flex items-center justify-center w-8 h-8 rounded-lg bg-bambu-dark cursor-grab active:cursor-grabbing hover:bg-bambu-dark-tertiary transition-colors touch-none shrink-0`,children:(0,G.jsx)(Ac,{className:`w-4 h-4 text-bambu-gray`})}):t===void 0?(0,G.jsx)(`div`,{className:`hidden sm:block w-8 shrink-0`}):(0,G.jsxs)(`div`,{className:`hidden sm:flex items-center justify-center w-8 h-8 rounded-lg bg-bambu-dark text-bambu-gray text-sm font-medium shrink-0`,children:[`#`,t]}),(0,G.jsx)(`div`,{className:`w-10 h-10 sm:w-14 sm:h-14 flex-shrink-0 bg-bambu-dark rounded-lg overflow-hidden`,children:e.archive_thumbnail?(0,G.jsx)(`img`,{src:e.plate_id==null?Z.getArchiveThumbnail(e.archive_id):Z.getArchivePlateThumbnail(e.archive_id,e.plate_id),alt:``,className:`w-full h-full object-cover`}):e.library_file_thumbnail?(0,G.jsx)(`img`,{src:e.plate_id==null?Z.getLibraryFileThumbnailUrl(e.library_file_id):Z.getLibraryFilePlateThumbnail(e.library_file_id,e.plate_id),alt:``,className:`w-full h-full object-cover`}):(0,G.jsx)(`div`,{className:`w-full h-full flex items-center justify-center text-bambu-gray`,children:(0,G.jsx)(qc,{className:`w-5 h-5 sm:w-6 sm:h-6`})})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1`,children:[(0,G.jsxs)(`p`,{className:`text-sm sm:text-base text-white font-medium truncate`,children:[LT(e,e=>v(`common.plusNMore`,{count:e})),(C?.is_multi_plate??!1)&&e.plate_id!==void 0&&e.plate_id!==null&&` • ${w.find(t=>t.index===e.plate_id)?.name||v(`queue.plateNumber`,{index:e.plate_id})}`]}),e.archive_id?(0,G.jsx)(Ai,{to:`/archives?highlight=${e.archive_id}`,className:`text-bambu-gray hover:text-bambu-green transition-colors flex-shrink-0`,title:v(`queue.viewArchive`),children:(0,G.jsx)(nc,{className:`w-3.5 h-3.5`})}):e.library_file_id?(0,G.jsx)(Ai,{to:`/library?highlight=${e.library_file_id}`,className:`text-bambu-gray hover:text-bambu-green transition-colors flex-shrink-0`,title:v(`queue.viewInFileManager`),children:(0,G.jsx)(nc,{className:`w-3.5 h-3.5`})}):null,e.batch_name&&(0,G.jsx)(`span`,{className:`flex-shrink-0 px-1.5 py-0.5 text-[10px] sm:text-xs bg-cyan-100 dark:bg-cyan-500/20 text-cyan-700 dark:text-cyan-300 rounded border border-cyan-300 dark:border-cyan-500/30`,children:e.batch_name})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-x-3 gap-y-1 text-xs sm:text-sm text-bambu-gray`,children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-1 sm:gap-1.5 ${e.printer_id===null&&!e.target_model?`text-orange-700 dark:text-orange-400`:``} ${e.target_model&&!e.printer_id?`text-blue-700 dark:text-blue-400`:``}`,children:[(0,G.jsx)(Ll,{className:`w-3 h-3 sm:w-3.5 sm:h-3.5`}),(0,G.jsx)(`span`,{className:`truncate max-w-[120px] sm:max-w-none`,children:(e.variants?.length??0)>1&&!e.printer_id?`${v(`queue.filter.any`)} ${e.variants.map(e=>e.target_model).join(` / `)}${e.target_location?` @ ${e.target_location}`:``}`:e.target_model&&!e.printer_id?`${v(`queue.filter.any`)} ${e.target_model}${e.target_location?` @ ${e.target_location}`:``}${e.required_filament_types?.length?` (${e.required_filament_types.join(`, `)})`:``}`:e.printer_id===null?v(`queue.filter.unassigned`):e.printer_name||`${v(`common.printer`)} #${e.printer_id}`})]}),e.print_time_seconds&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 sm:gap-1.5`,children:[(0,G.jsx)(Mu,{className:`w-3 h-3 sm:w-3.5 sm:h-3.5`}),op(e.print_time_seconds)]}),I&&(0,G.jsxs)(`span`,{"data-testid":`queue-item-eta`,className:`text-bambu-green font-medium`,title:v(`queue.time.etaIfStartedNow`),children:[`ETA `,I]}),e.filament_used_grams&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 sm:gap-1.5`,children:[(0,G.jsx)(Yu,{className:`w-3 h-3 sm:w-3.5 sm:h-3.5`}),u8(e.filament_used_grams)]}),(()=>{let t=kW(e.bed_type);return t?(0,G.jsxs)(`span`,{className:`flex items-center gap-1 sm:gap-1.5`,title:t.label,children:[(0,G.jsx)(`img`,{src:t.icon,alt:``,className:`w-3.5 h-3.5 sm:w-4 sm:h-4 object-contain`}),(0,G.jsx)(`span`,{className:`truncate max-w-[120px]`,children:t.label})]}):null})(),e.created_by_username&&(0,G.jsxs)(`span`,{className:`hidden sm:flex items-center gap-1.5`,title:v(`queue.addedBy`,{name:e.created_by_username}),children:[(0,G.jsx)(Vu,{className:`w-3.5 h-3.5`}),e.created_by_username]}),P&&!e.manual_start&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(js,{className:`w-3.5 h-3.5`}),e.scheduled_time?(ep(e.scheduled_time)?.getTime()??0)-Date.now()<-6e4?v?.(`queue.time.overdue`)??`Overdue`:sp(e.scheduled_time,u,v):v?.(`queue.time.whenFree`)??`When a printer is free`]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-1.5 sm:gap-2 mt-1.5 sm:mt-2`,children:[e.manual_start&&(0,G.jsxs)(`span`,{className:`text-[10px] sm:text-xs px-1.5 sm:px-2 py-0.5 bg-purple-50 dark:bg-purple-500/10 text-purple-700 dark:text-purple-400 rounded-full border border-purple-200 dark:border-purple-500/20 flex items-center gap-1`,children:[(0,G.jsx)(Mc,{className:`w-2.5 h-2.5 sm:w-3 sm:h-3`}),v(`queue.badges.staged`)]}),e.require_previous_success&&(0,G.jsx)(`span`,{className:`text-[10px] sm:text-xs px-1.5 sm:px-2 py-0.5 bg-orange-50 dark:bg-orange-500/10 text-orange-700 dark:text-orange-400 rounded-full border border-orange-200 dark:border-orange-500/20`,children:v(`queue.badges.requiresPrevious`)}),e.auto_off_after&&(0,G.jsxs)(`span`,{className:`text-[10px] sm:text-xs px-1.5 sm:px-2 py-0.5 bg-blue-50 dark:bg-blue-500/10 text-blue-700 dark:text-blue-400 rounded-full border border-blue-200 dark:border-blue-500/20 flex items-center gap-1`,children:[(0,G.jsx)(Il,{className:`w-2.5 h-2.5 sm:w-3 sm:h-3`}),v(`queue.badges.autoPowerOff`)]}),e.gcode_injection&&(0,G.jsxs)(`span`,{className:`text-[10px] sm:text-xs px-1.5 sm:px-2 py-0.5 bg-emerald-50 dark:bg-emerald-500/10 text-emerald-700 dark:text-emerald-400 rounded-full border border-emerald-200 dark:border-emerald-500/20 flex items-center gap-1`,children:[(0,G.jsx)(Fs,{className:`w-2.5 h-2.5 sm:w-3 sm:h-3`}),v(`queue.badges.gcodeInjection`)]})]}),N&&y&&(()=>{let e=y.state===`RUNNING`||y.state===`PAUSE`,t=e&&y.progress||0,n=e?y.remaining_time:null,r=e?y.layer_num:null,i=e?y.total_layers:null;return(0,G.jsxs)(`div`,{className:`mt-2 sm:mt-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-xs sm:text-sm`,children:[(0,G.jsx)(`div`,{className:`flex-1 bg-bambu-dark-tertiary rounded-full h-1.5 sm:h-2 mr-3`,children:(0,G.jsx)(`div`,{className:`bg-bambu-green h-1.5 sm:h-2 rounded-full transition-all`,style:{width:`${t}%`}})}),(0,G.jsxs)(`span`,{className:`text-white`,children:[Math.round(t),`%`]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 sm:gap-3 mt-1.5 sm:mt-2 text-[10px] sm:text-xs text-bambu-gray`,children:[n!=null&&n>0&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(js,{className:`w-3 h-3`}),op(n*60)]}),(0,G.jsxs)(`span`,{className:`text-bambu-green font-medium`,title:v(`printers.estimatedCompletion`),children:[`ETA `,ap(n,u,v)]})]}),r!=null&&i!=null&&i>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(qc,{className:`w-3 h-3`}),r,`/`,i]})]})]})})(),e.waiting_reason&&e.status===`pending`&&(0,G.jsxs)(`p`,{className:`text-[10px] sm:text-xs text-purple-700 dark:text-purple-400 mt-1.5 sm:mt-2 flex items-start gap-1`,children:[(0,G.jsx)(ys,{className:`w-3 h-3 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`span`,{children:e.waiting_reason})]}),e.filament_short&&e.status===`pending`&&(0,G.jsxs)(`p`,{className:`text-[10px] sm:text-xs text-yellow-700 dark:text-yellow-400 mt-1.5 sm:mt-2 flex items-start gap-1`,title:v(`queue.filamentShort.rowTooltip`),children:[(0,G.jsx)(ys,{className:`w-3 h-3 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`span`,{children:v(`queue.filamentShort.rowBadge`)})]}),e.archive_has_slicer_ams_mapping&&(0,G.jsxs)(`p`,{className:`text-[10px] sm:text-xs text-green-700 dark:text-green-400 mt-1.5 sm:mt-2 flex items-start gap-1`,title:v(`queue.slicerAmsMapping.rowTooltip`),children:[(0,G.jsx)(fs,{className:`w-3 h-3 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`span`,{children:v(`queue.slicerAmsMapping.rowBadge`)})]}),e.error_message&&(0,G.jsxs)(`p`,{className:`text-[10px] sm:text-xs text-red-700 dark:text-red-400 mt-1.5 sm:mt-2 flex items-center gap-1`,children:[(0,G.jsx)(ys,{className:`w-3 h-3`}),e.error_message]})]}),(0,G.jsxs)(`div`,{className:`flex flex-col sm:flex-row items-end sm:items-center gap-2 sm:gap-1 shrink-0`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(UHe,{status:e.status,waitingReason:e.waiting_reason,printerState:h,t:v}),(0,G.jsxs)(`div`,{className:`flex items-center gap-0.5 sm:gap-1`,children:[N&&(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:a,disabled:!m(`queue`,`update`,e.created_by_id),title:m(`queue`,`update`,e.created_by_id)?v(`queue.actions.stopPrint`):v(`queue.permissions.noStopPrint`),className:`text-red-600 dark:text-red-400 hover:text-red-700 dark:hover:text-red-300 hover:bg-red-50 dark:hover:bg-red-500/10 p-1.5 sm:p-2`,children:(0,G.jsx)(Es,{className:`w-4 h-4`})}),P&&(0,G.jsxs)(G.Fragment,{children:[e.manual_start&&(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:s,disabled:!m(`queue`,`update`,e.created_by_id),title:m(`queue`,`update`,e.created_by_id)?v(`queue.actions.startPrint`):v(`queue.permissions.noStartPrint`),className:`text-bambu-green hover:text-bambu-green-light hover:bg-bambu-green/10 p-1.5 sm:p-2`,children:(0,G.jsx)(Ml,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:n,disabled:!m(`queue`,`update`,e.created_by_id),title:m(`queue`,`update`,e.created_by_id)?v(`common.edit`):v(`queue.permissions.noEdit`),className:`p-1.5 sm:p-2`,children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:r,disabled:!m(`queue`,`delete`,e.created_by_id),title:m(`queue`,`delete`,e.created_by_id)?v(`common.cancel`):v(`queue.permissions.noCancel`),className:`text-red-600 dark:text-red-400 hover:text-red-700 dark:hover:text-red-300 hover:bg-red-50 dark:hover:bg-red-500/10 p-1.5 sm:p-2`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}),F&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:o,disabled:!p(`queue:create`),title:p(`queue:create`)?v(`queue.actions.requeue`):v(`queue.permissions.noRequeue`),className:`text-bambu-green hover:text-bambu-green/80 hover:bg-bambu-green/10 p-1.5 sm:p-2`,children:(0,G.jsx)(Vl,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:i,disabled:!m(`queue`,`delete`,e.created_by_id),title:m(`queue`,`delete`,e.created_by_id)?v(`common.remove`):v(`queue.permissions.noRemove`),className:`p-1.5 sm:p-2`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})]})]})]})]})}function m8(e){let{row:t,setEditItem:n,setConfirmAction:r,startMutation:i,selectedItems:a,handleToggleSelect:o,timeFormat:s,hasPermission:c,canModify:l,t:u,etaEligibleIds:d,etaNow:f,onMoveUp:p,onMoveDown:m}=e;return t.kind===`item`?(0,G.jsx)(p8,{item:t.item,onEdit:()=>n(t.item),onCancel:()=>r({type:`cancel`,item:t.item}),onRemove:()=>{},onStop:()=>{},onRequeue:()=>{},onStart:()=>i.mutate({id:t.item.id}),onMoveUp:p,onMoveDown:m,timeFormat:s,isSelected:a.includes(t.item.id),onToggleSelect:()=>o(t.item.id),hasPermission:c,canModify:l,showEta:d.has(t.item.id),etaNow:f,t:u}):(0,G.jsx)(GHe,{...e})}function GHe({row:e,collapsed:t,onToggleBatch:n,onUngroup:r,setEditItem:i,setConfirmAction:a,startMutation:o,selectedItems:s,handleToggleSelect:c,timeFormat:l,hasPermission:u,canModify:d,t:f,etaEligibleIds:p,etaNow:m,aggregateForRows:h,onMoveUp:g,onMoveDown:_,onMoveBlock:v}){let y=e,b=u(`queue:reorder`),{attributes:x,listeners:S,setNodeRef:C,transform:w,transition:T,isDragging:E}=J6({id:`batch-${y.batchId}`,disabled:!b}),D={transform:E3.Transform.toString(w),transition:T},O=h([y]),k=y.items.map(e=>e.id),A=k.length>0&&k.every(e=>s.includes(e)),j=new Set(y.items.map(e=>e.status)),M=j.has(`failed`)?`failed`:j.has(`printing`)?`printing`:`pending`,N=y.items.filter(e=>e.status===`pending`).length;return(0,G.jsxs)(`div`,{ref:C,style:D,className:`bg-bambu-dark-secondary rounded-xl border border-l-[3px] border-l-cyan-400 border-bambu-dark-tertiary overflow-hidden ${E?`opacity-50 scale-[1.01] shadow-xl z-50`:``}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 sm:gap-3 p-3 sm:p-4`,children:[b&&(g||_)&&(0,G.jsxs)(`div`,{className:`flex sm:hidden flex-col shrink-0 -my-1`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:g,disabled:!g,title:f(`queue.moveUp`),"aria-label":f(`queue.moveUp`),className:`flex items-center justify-center w-8 h-7 rounded-lg text-bambu-gray hover:text-white hover:bg-bambu-dark disabled:opacity-25 disabled:hover:bg-transparent transition-colors`,children:(0,G.jsx)(gs,{className:`w-5 h-5`})}),(0,G.jsx)(`button`,{type:`button`,onClick:_,disabled:!_,title:f(`queue.moveDown`),"aria-label":f(`queue.moveDown`),className:`flex items-center justify-center w-8 h-7 rounded-lg text-bambu-gray hover:text-white hover:bg-bambu-dark disabled:opacity-25 disabled:hover:bg-transparent transition-colors`,children:(0,G.jsx)(ps,{className:`w-5 h-5`})})]}),(0,G.jsx)(`button`,{onClick:e=>{e.stopPropagation(),k.forEach(e=>{(A&&s.includes(e)||!A&&!s.includes(e))&&c(e)})},className:`hidden sm:flex items-center justify-center w-6 h-6 rounded border transition-colors shrink-0 ${A?`bg-bambu-green border-bambu-green text-white`:`border-white/30 bg-black/30 hover:border-bambu-green/50`}`,title:f(A?`queue.bulkEdit.deselectAll`:`queue.bulkEdit.selectAll`),children:A&&(0,G.jsx)(fs,{className:`w-4 h-4`})}),b&&(0,G.jsx)(`div`,{...x,...S,className:`hidden sm:flex items-center justify-center w-8 h-8 rounded-lg bg-bambu-dark cursor-grab active:cursor-grabbing hover:bg-bambu-dark-tertiary transition-colors touch-none shrink-0`,title:f(`queue.batch.dragGroup`,{defaultValue:`Drag group`}),children:(0,G.jsx)(Ac,{className:`w-4 h-4 text-bambu-gray`})}),(0,G.jsx)(`button`,{onClick:n,className:`flex items-center justify-center w-8 h-8 rounded-lg bg-bambu-dark hover:bg-bambu-dark-tertiary transition-colors shrink-0`,title:f(t?`queue.batch.expand`:`queue.batch.collapse`),children:t?(0,G.jsx)(ms,{className:`w-4 h-4 text-bambu-gray`}):(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray`})}),(0,G.jsx)(`div`,{className:`w-10 h-10 sm:w-12 sm:h-12 flex-shrink-0 bg-bambu-dark rounded-lg flex items-center justify-center`,children:t?(0,G.jsx)(Sl,{className:`w-5 h-5 text-cyan-700 dark:text-cyan-300`}):(0,G.jsx)(xl,{className:`w-5 h-5 text-cyan-700 dark:text-cyan-300`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1`,children:[(0,G.jsx)(`p`,{className:`text-sm sm:text-base text-white font-medium truncate`,children:y.batchName}),(0,G.jsx)(`span`,{className:`flex-shrink-0 px-1.5 py-0.5 text-[10px] sm:text-xs bg-cyan-100 dark:bg-cyan-500/15 text-cyan-700 dark:text-cyan-300 rounded border border-cyan-300 dark:border-cyan-500/30`,children:f(`queue.batch.label`,{count:O.count})})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-x-3 gap-y-1 text-xs sm:text-sm text-bambu-gray`,children:[O.time>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 sm:gap-1.5`,children:[(0,G.jsx)(Mu,{className:`w-3 h-3 sm:w-3.5 sm:h-3.5`}),op(O.time)]}),O.weight>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 sm:gap-1.5`,children:[(0,G.jsx)(Yu,{className:`w-3 h-3 sm:w-3.5 sm:h-3.5`}),u8(O.weight)]}),N>0&&M===`pending`&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 sm:gap-1.5 text-yellow-700 dark:text-yellow-400`,children:[(0,G.jsx)(js,{className:`w-3 h-3 sm:w-3.5 sm:h-3.5`}),f(`queue.batch.pendingCount`,{count:N})]})]})]}),(0,G.jsx)(`div`,{className:`flex items-center gap-1 shrink-0`,children:r&&(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:r,title:f(`queue.batch.ungroup`),className:`text-cyan-700 dark:text-cyan-300 hover:text-cyan-900 dark:hover:text-cyan-200 hover:bg-cyan-50 dark:hover:bg-cyan-500/10 p-1.5 sm:p-2`,children:(0,G.jsx)(Ru,{className:`w-4 h-4`})})})]}),!t&&(0,G.jsx)(`div`,{className:`border-t border-bambu-dark-tertiary bg-black/20 p-2 sm:p-3 space-y-2`,children:y.items.map((e,t)=>(0,G.jsx)(p8,{item:e,onEdit:()=>i(e),onCancel:()=>a({type:`cancel`,item:e}),onRemove:()=>{},onStop:()=>{},onRequeue:()=>{},onStart:()=>o.mutate({id:e.id}),onMoveUp:v&&t>0?()=>v([e.id],y.items[t-1].id,!1):void 0,onMoveDown:v&&t<y.items.length-1?()=>v([e.id],y.items[t+1].id,!0):void 0,timeFormat:l,isSelected:s.includes(e.id),onToggleSelect:()=>c(e.id),hasPermission:u,canModify:d,showEta:p.has(e.id),etaNow:m,t:f},e.id))})]})}function KHe({items:e,visibleCount:t,onShowMore:n,sortBy:r,sortAsc:i,onSortByChange:a,onSortAscToggle:o,onRemove:s,onRequeue:c,timeFormat:l,batchCollapsed:u,toggleBatchCollapsed:d,hasPermission:f,canModify:p,t:m}){if(e.length===0)return(0,G.jsxs)(Ld,{className:`p-12 text-center border-dashed`,children:[(0,G.jsx)(Zc,{className:`w-16 h-16 text-bambu-gray mx-auto mb-4 opacity-50`}),(0,G.jsx)(`h3`,{className:`text-xl font-medium text-white mb-2`,children:m(`queue.history.emptyTitle`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray max-w-md mx-auto`,children:m(`queue.history.emptyDescription`)})]});let h=[],g=new Set;for(let n of e.slice(0,t))if(n.batch_id!=null){if(g.has(n.batch_id))continue;g.add(n.batch_id);let t=e.filter(e=>e.batch_id===n.batch_id);h.push({kind:`batch`,batchId:n.batch_id,batchName:n.batch_name||m(`queue.batch.defaultName`),items:t})}else h.push({kind:`item`,item:n});return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center justify-between gap-2 mb-3 sm:mb-4`,children:[(0,G.jsxs)(`h2`,{className:`text-base sm:text-lg font-semibold text-white flex items-center gap-2`,children:[m(`queue.sections.history`),(0,G.jsxs)(`span`,{className:`text-xs sm:text-sm font-normal text-bambu-gray`,children:[`(`,m(`queue.itemCount`,{count:e.length}),`)`]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`select`,{className:`px-2 sm:px-3 py-1.5 text-xs sm:text-sm bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:r,onChange:e=>a(e.target.value),children:[(0,G.jsx)(`option`,{value:`date`,children:m(`queue.sort.byDate`)}),(0,G.jsx)(`option`,{value:`name`,children:m(`queue.sort.byName`)}),(0,G.jsx)(`option`,{value:`printer`,children:m(`queue.sort.byPrinter`)})]}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:o,title:m(i?`queue.sort.ascendingOldest`:`queue.sort.descendingNewest`),className:`px-2`,children:i?(0,G.jsx)(Ho,{className:`w-4 h-4`}):(0,G.jsx)(Io,{className:`w-4 h-4`})})]})]}),(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 xl:grid-cols-3 gap-2`,children:h.map(e=>{if(e.kind===`item`)return(0,G.jsx)(t8,{item:e.item,onRemove:()=>s(e.item),onRequeue:()=>c(e.item),timeFormat:l,hasPermission:f,canModify:p,t:m},e.item.id);let t=u[e.batchId]??!0,n=e.items.filter(e=>e.status===`completed`).length,r=e.items.filter(e=>e.status===`failed`).length,i=e.items.filter(e=>e.status===`skipped`).length,a=e.items.filter(e=>e.status===`cancelled`).length,o=e.items.map(e=>e.completed_at||e.created_at).filter(e=>!!e).sort().at(-1);return(0,G.jsxs)(`div`,{className:`md:col-span-2 xl:col-span-3 bg-bambu-dark-secondary rounded-lg border border-bambu-dark-tertiary border-l-[3px] border-l-cyan-400`,children:[(0,G.jsxs)(`button`,{onClick:()=>d(e.batchId),className:`w-full flex items-center gap-2 sm:gap-3 px-3 py-2 hover:bg-bambu-dark/30 transition-colors text-left`,title:m(t?`queue.batch.expand`:`queue.batch.collapse`),children:[t?(0,G.jsx)(ms,{className:`w-4 h-4 text-bambu-gray shrink-0`}):(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray shrink-0`}),t?(0,G.jsx)(Sl,{className:`w-5 h-5 text-cyan-700 dark:text-cyan-300 shrink-0`}):(0,G.jsx)(xl,{className:`w-5 h-5 text-cyan-700 dark:text-cyan-300 shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm text-white font-medium truncate min-w-0 flex-1`,children:e.batchName}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-xs text-bambu-gray shrink-0`,children:[n>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-emerald-700 dark:text-emerald-400`,children:[(0,G.jsx)(xs,{className:`w-3 h-3`}),n]}),r>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-red-700 dark:text-red-400`,children:[(0,G.jsx)(Ds,{className:`w-3 h-3`}),r]}),i>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-orange-700 dark:text-orange-400`,children:[(0,G.jsx)(uu,{className:`w-3 h-3`}),i]}),a>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-gray-400`,children:[(0,G.jsx)(Uo,{className:`w-3 h-3`}),a]}),(0,G.jsx)(`span`,{title:o??void 0,children:o?sp(o,l,m):null})]})]}),!t&&(0,G.jsx)(`div`,{className:`border-t border-bambu-dark-tertiary bg-black/20 p-2 grid grid-cols-1 md:grid-cols-2 xl:grid-cols-3 gap-2`,children:e.items.map(e=>(0,G.jsx)(t8,{item:e,onRemove:()=>s(e),onRequeue:()=>c(e),timeFormat:l,hasPermission:f,canModify:p,t:m},e.id))})]},`batch-${e.batchId}`)})}),e.length>t&&(0,G.jsxs)(`div`,{className:`mt-4 flex flex-col items-center gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:n,children:m(`queue.history.showMore`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:m(`queue.history.showingCount`,{shown:Math.min(t,e.length),total:e.length})})]})]})}var h8=50;function qHe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),{hasPermission:r,hasAnyPermission:i,canModify:a}=jd(),[o,s]=(0,y.useState)(null),[c,l]=(0,y.useState)(``),[u,d]=(0,y.useState)(``),[f,p]=(0,y.useState)(!1),[m,h]=(0,y.useState)(null),[g,_]=(0,y.useState)(null),[v,b]=(0,y.useState)(null),[x,S]=(0,y.useState)([]),[C,w]=(0,y.useState)(!1),[T,E]=(0,y.useState)(null),[D,O]=(0,y.useState)(()=>localStorage.getItem(`queue.historySortBy`)||`date`),[k,A]=(0,y.useState)(()=>{let e=localStorage.getItem(`queue.historySortAsc`);return e===null?!1:e===`true`}),[j,M]=(0,y.useState)(h8),[N,P]=(0,y.useState)(()=>localStorage.getItem(`queue.pendingSortBy`)||`position`),[F,I]=(0,y.useState)(()=>{let e=localStorage.getItem(`queue.pendingSortAsc`);return e===null?!0:e===`true`}),[L,R]=(0,y.useState)(()=>{let e=new URLSearchParams(window.location.search).get(`tab`);if(e===`pipelines`||e===`history`||e===`timeline`||e===`queue`||e===`batches`)return e;let t=localStorage.getItem(`queue.activeTab`);return t===`history`||t===`timeline`||t===`pipelines`||t===`batches`?t:`queue`}),[z,B]=(0,y.useState)(()=>localStorage.getItem(`queue.activeLayout`)===`printer`?`printer`:`position`),[V,ee]=(0,y.useState)(()=>{try{let e=localStorage.getItem(`queue.batchCollapsed`);return e?JSON.parse(e):{}}catch{return{}}}),[te,ne]=(0,y.useState)(null),[re,ie]=(0,y.useState)(!1),[ae,oe]=(0,y.useState)(null);(0,y.useEffect)(()=>{localStorage.setItem(`queue.historySortBy`,D)},[D]),(0,y.useEffect)(()=>{localStorage.setItem(`queue.historySortAsc`,String(k))},[k]),(0,y.useEffect)(()=>{M(h8)},[D,k,u]),(0,y.useEffect)(()=>{localStorage.setItem(`queue.pendingSortBy`,N)},[N]),(0,y.useEffect)(()=>{localStorage.setItem(`queue.pendingSortAsc`,String(F))},[F]),(0,y.useEffect)(()=>{localStorage.setItem(`queue.activeTab`,L)},[L]),(0,y.useEffect)(()=>{localStorage.setItem(`queue.activeLayout`,z)},[z]),(0,y.useEffect)(()=>{localStorage.setItem(`queue.batchCollapsed`,JSON.stringify(V))},[V]);let se=M3(j3(f6,{activationConstraint:{distance:8}}),j3(c6,{coordinateGetter:X6})),{data:H}=K({queryKey:[`settings`],queryFn:Z.getSettings}),ce=H?.time_format||`system`,{data:le}=K({queryKey:[`batches`,`active`],queryFn:()=>Z.getBatches(`active`)}),ue=le?.length??0,{data:de,isLoading:fe}=K({queryKey:[`queue`,o,c],queryFn:()=>Z.getQueue(o||void 0,c||void 0),refetchInterval:5e3}),{data:pe}=K({queryKey:[`printers`],queryFn:()=>Z.getPrinters()}),me=q({mutationFn:e=>Z.updateSettings({queue_shortest_first:e}),onSuccess:()=>{t.invalidateQueries({queryKey:[`settings`]})}}),he=q({mutationFn:e=>Z.cancelQueueItem(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`queue`]}),n(e(`queue.toast.cancelled`))},onError:()=>n(e(`queue.toast.cancelFailed`),`error`)}),ge=q({mutationFn:e=>Z.removeFromQueue(e),onSuccess:r=>{t.invalidateQueries({queryKey:[`queue`]}),t.invalidateQueries({queryKey:[`batches`]}),n(r.deleted===!1?e(`queue.toast.keptForOrder`):e(`queue.toast.removed`))},onError:()=>n(e(`queue.toast.removeFailed`),`error`)}),_e=q({mutationFn:e=>Z.stopQueueItem(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`queue`]}),n(e(`queue.toast.stopped`))},onError:()=>n(e(`queue.toast.stopFailed`),`error`)}),[ve,ye]=(0,y.useState)(null),be=q({mutationFn:({id:e,skipFilamentCheck:t})=>Z.startQueueItem(e,{skipFilamentCheck:t}),onSuccess:()=>{t.invalidateQueries({queryKey:[`queue`]}),n(e(`queue.toast.released`)),ye(null)},onError:(t,r)=>{if(t instanceof od&&t.status===409&&t.code===`insufficient_filament`){let e=t.detail?.deficit??[];ye({itemId:r.id,deficit:e});return}n(e(`queue.toast.startFailed`),`error`)}}),xe=q({mutationFn:e=>Z.reorderQueue(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`queue`]})},onError:()=>n(e(`queue.toast.reorderFailed`),`error`)}),Se=q({mutationFn:async()=>{let e=de?.filter(e=>[`completed`,`failed`,`skipped`,`cancelled`].includes(e.status))||[],t=0,n=0;for(let r of e)(await Z.removeFromQueue(r.id)).deleted===!1?n+=1:t+=1;return{cleared:t,kept:n}},onSuccess:({cleared:r,kept:i})=>{t.invalidateQueries({queryKey:[`queue`]}),t.invalidateQueries({queryKey:[`batches`]}),n(i>0?`${e(`queue.toast.historyCleared`,{count:r})} ${e(`queue.toast.historyKeptForOrders`,{kept:i})}`:e(`queue.toast.historyCleared`,{count:r}))},onError:()=>n(e(`queue.toast.clearHistoryFailed`),`error`)}),Ce=q({mutationFn:e=>Z.bulkUpdateQueue(e),onSuccess:e=>{t.invalidateQueries({queryKey:[`queue`]}),S([]),w(!1),n(e.message)},onError:()=>n(e(`queue.toast.updateFailed`),`error`)}),we=q({mutationFn:async e=>{for(let t of e)await Z.cancelQueueItem(t);return e.length},onSuccess:r=>{t.invalidateQueries({queryKey:[`queue`]}),S([]),n(e(`queue.toast.bulkCancelled`,{count:r}))},onError:()=>n(e(`queue.toast.bulkCancelFailed`),`error`)}),Te=q({mutationFn:e=>Z.resumeQueueAfterFailure(e),onSuccess:r=>{t.invalidateQueries({queryKey:[`queue`]}),E(null),n(e(`queue.toast.resumedAfterFailure`,{restored:r.restored,acknowledged:r.acknowledged}))},onError:()=>n(e(`queue.toast.resumeAfterFailureFailed`),`error`)}),Ee=q({mutationFn:e=>Z.createBatch(e),onSuccess:r=>{t.invalidateQueries({queryKey:[`queue`]}),S([]),ie(!1),ee(e=>({...e,[r.id]:!1})),n(e(`queue.toast.batchCreated`,{name:r.name}))},onError:()=>n(e(`queue.toast.batchCreateFailed`),`error`)}),De=q({mutationFn:e=>Z.ungroupBatch(e),onSuccess:r=>{t.invalidateQueries({queryKey:[`queue`]}),oe(null),n(e(`queue.toast.batchUngrouped`,{count:r.ungrouped_count}))},onError:()=>n(e(`queue.toast.batchUngroupFailed`),`error`)}),Oe=e=>{S(t=>t.includes(e)?t.filter(t=>t!==e):[...t,e])},ke=(0,y.useMemo)(()=>{let e=new Set;return pe?.forEach(t=>{t.location&&e.add(t.location)}),de?.forEach(t=>{t.target_location&&e.add(t.target_location)}),Array.from(e).sort()},[pe,de]),Ae=(0,y.useCallback)(e=>u?e.target_location?e.target_location===u:e.printer_id?pe?.find(t=>t.id===e.printer_id)?.location===u:!1:!0,[u,pe]),je=(0,y.useMemo)(()=>{let e=de?.filter(e=>e.status===`pending`)||[];u&&(e=e.filter(Ae));let t=e=>{if(!e.scheduled_time)return 0;let t=ep(e.scheduled_time)?.getTime()??0;return t>Date.now()+4320*60*60*1e3?0:t};return H?.queue_shortest_first?[...e].sort((e,t)=>PHe(e,t,!0)):[...e].sort((e,n)=>{let r;if(N===`name`){let t=e.archive_name||e.library_file_name||``,i=n.archive_name||n.library_file_name||``;r=t.localeCompare(i)}else r=N===`printer`?(e.printer_name||``).localeCompare(n.printer_name||``):N===`time`?t(e)-t(n):e.position-n.position;return F?r:-r})},[de,N,F,Ae,u,H?.queue_shortest_first]),Me=()=>{let e=je.map(e=>e.id);x.length===e.length?S([]):S(e)},Ne=(0,y.useMemo)(()=>{let e=de?.filter(e=>e.status===`printing`)||[];return u&&(e=e.filter(Ae)),e},[de,u,Ae]),Pe=(0,y.useMemo)(()=>{let e=new Set;if(!de)return e;let t=new Set;de.forEach(e=>{e.status===`printing`&&e.printer_id&&t.add(e.printer_id)});let n=e=>e.scheduled_time?(ep(e.scheduled_time)?.getTime()??0)>Date.now():!1,r=(e,t)=>r8(e,t,H?.queue_shortest_first??!1),i=new Map;return de.filter(e=>e.status===`pending`&&e.printer_id!=null&&!e.manual_start&&!n(e)).sort(r).forEach(e=>{let t=i.get(e.printer_id)??[];t.push(e),i.set(e.printer_id,t)}),de.forEach(r=>{if(r.status===`pending`&&!r.waiting_reason&&!n(r)&&!(r.print_time_seconds==null||r.print_time_seconds<=0)&&!r.require_previous_success){if(r.printer_id==null){e.add(r.id);return}if(!t.has(r.printer_id)){if(r.manual_start){e.add(r.id);return}i.get(r.printer_id)?.[0]?.id===r.id&&e.add(r.id)}}}),e},[de,H?.queue_shortest_first]),[Fe,Ie]=(0,y.useState)(()=>Date.now()),Le=Pe.size>0;(0,y.useEffect)(()=>{if(!Le)return;Ie(Date.now());let e=setInterval(()=>Ie(Date.now()),3e4);return()=>clearInterval(e)},[Le]);let Re=(0,y.useMemo)(()=>{let e=new Set;return Ne.forEach(t=>{t.printer_id&&e.add(t.printer_id)}),Array.from(e)},[Ne]),ze=Co({queries:Re.map(e=>({queryKey:[`printerStatus`,e],queryFn:()=>Z.getPrinterStatus(e),refetchInterval:5e3}))}),Be=(0,y.useMemo)(()=>{let e={};return Re.forEach((t,n)=>{let r=ze[n];r?.data?.state&&(e[t]=r.data.state)}),e},[Re,ze]),Ve=(0,y.useMemo)(()=>{let e={};return Re.forEach((t,n)=>{let r=ze[n];r?.data&&(e[t]={progress:r.data.progress??void 0,remaining_time:r.data.remaining_time??void 0,state:r.data.state??void 0})}),e},[Re,ze]),He=(0,y.useMemo)(()=>{let e=de?.filter(e=>[`completed`,`failed`,`skipped`,`cancelled`].includes(e.status))||[];return u&&(e=e.filter(Ae)),[...e].sort((e,t)=>{let n;if(D===`name`){let r=e.archive_name||e.library_file_name||``,i=t.archive_name||t.library_file_name||``;n=r.localeCompare(i)}else n=D===`printer`?(e.printer_name||``).localeCompare(t.printer_name||``):(ep(t.completed_at||t.created_at)?.getTime()??0)-(ep(e.completed_at||e.created_at)?.getTime()??0);return k?-n:n})},[de,D,k,Ae,u]),Ue=(0,y.useMemo)(()=>je.reduce((e,t)=>e+(t.print_time_seconds||0),0),[je]),We=(0,y.useMemo)(()=>je.reduce((e,t)=>e+(t.filament_used_grams||0),0),[je]),Ge=e=>{let t=e.active.id;ne(typeof t==`number`||typeof t==`string`?t:null)},Ke=e=>{let{active:t,over:n}=e;if(ne(null),!n||t.id===n.id)return;let r,i=t.id;if(typeof i==`string`&&i.startsWith(`batch-`)){let e=Number(i.slice(6));r=je.filter(t=>t.batch_id===e).map(e=>e.id)}else{let e=i;r=x.includes(e)&&x.length>1?x.slice().sort((e,t)=>je.findIndex(t=>t.id===e)-je.findIndex(e=>e.id===t)):[e]}if(r.length===0)return;let a,o=n.id;if(typeof o==`string`&&o.startsWith(`batch-`)){let e=Number(o.slice(6));a=je.findIndex(t=>t.batch_id===e)}else a=je.findIndex(e=>e.id===o);if(a===-1)return;let s=je[a],c=je.filter(e=>!r.includes(e.id)),l=c.findIndex(e=>e.id===s.id);l===-1&&(l=a),je.findIndex(e=>e.id===r[0])<a&&(l+=1);let u=[...c.slice(0,l),...r.map(e=>je.find(t=>t.id===e)).filter(e=>!!e),...c.slice(l)].map((e,t)=>({id:e.id,position:t+1}));xe.mutate(u)},qe=(0,y.useMemo)(()=>{let t=[],n=new Set;for(let r of je)if(r.batch_id!=null){if(n.has(r.batch_id))continue;n.add(r.batch_id);let i=je.filter(e=>e.batch_id===r.batch_id);t.push({kind:`batch`,batchId:r.batch_id,batchName:r.batch_name||e(`queue.batch.defaultName`),items:i})}else t.push({kind:`item`,item:r});return t},[je,e]),Je=r(`queue:reorder`)&&N===`position`&&!H?.queue_shortest_first,Ye=e=>e.kind===`item`?[e.item.id]:e.items.map(e=>e.id),Xe=(e,t,n)=>{let r=je.filter(t=>!e.includes(t.id)),i=r.findIndex(e=>e.id===t);if(i===-1)return;n&&(i+=1);let a=e.map(e=>je.find(t=>t.id===e)).filter(e=>!!e),o=[...r.slice(0,i),...a,...r.slice(i)];xe.mutate(o.map((e,t)=>({id:e.id,position:t+1})))},Ze=(e,t)=>{if(!Je)return{};let n=Ye(e[t]);return{onMoveUp:t>0?()=>Xe(n,Ye(e[t-1])[0],!1):void 0,onMoveDown:t<e.length-1?()=>{let r=Ye(e[t+1]);Xe(n,r[r.length-1],!0)}:void 0}},Qe=(0,y.useMemo)(()=>{let e=[];for(let t of qe)if(t.kind===`item`)e.push(t.item.id);else if(e.push(`batch-${t.batchId}`),!(V[t.batchId]??!0))for(let n of t.items)e.push(n.id);return e},[qe,V]),$e=(0,y.useMemo)(()=>x.length<2?!1:x.every(e=>{let t=je.find(t=>t.id===e);return t&&t.batch_id==null}),[x,je]),et=e=>{ee(t=>({...t,[e]:!(t[e]??!0)}))},tt=(0,y.useMemo)(()=>{let t=new Map,n=t=>{if(t.printer_id)return{key:`printer:${t.printer_id}`,label:t.printer_name||`Printer #${t.printer_id}`,printerId:t.printer_id,targetModel:null,isUnassigned:!1};if((t.variants?.length??0)>1){let n=t.variants.map(e=>e.target_model).join(` / `);return{key:`models:${n}`,label:`${e(`queue.filter.any`)} ${n}`,printerId:null,targetModel:null,isUnassigned:!1}}return t.target_model?{key:`model:${t.target_model}`,label:`${e(`queue.filter.any`)} ${t.target_model}`,printerId:null,targetModel:t.target_model,isUnassigned:!1}:{key:`unassigned`,label:e(`queue.filter.unassigned`),printerId:null,targetModel:null,isUnassigned:!0}};for(let e of qe){let r=e.kind===`item`?e.item:e.items[0];if(!r)continue;let i=n(r);t.has(i.key)||t.set(i.key,{...i,rows:[]}),t.get(i.key).rows.push(e)}return Array.from(t.values()).sort((e,t)=>e.isUnassigned&&!t.isUnassigned?1:!e.isUnassigned&&t.isUnassigned?-1:e.label.localeCompare(t.label))},[qe,e]),nt=(0,y.useMemo)(()=>{let e=new Map;return de?.forEach(t=>{if(t.status===`skipped`&&t.error_message===`Previous print failed or was aborted`&&t.printer_id){let n=e.get(t.printer_id);n?n.count+=1:e.set(t.printer_id,{name:t.printer_name||`Printer #${t.printer_id}`,count:1})}}),Array.from(e.entries()).map(([e,{name:t,count:n}])=>({printerId:e,printerName:t,skippedCount:n})).sort((e,t)=>e.printerName.localeCompare(t.printerName))},[de]),rt=e=>{let t=0,n=0,r=0;for(let i of e){let e=i.kind===`item`?[i.item]:i.items;for(let i of e)t+=1,n+=i.print_time_seconds||0,r+=i.filament_used_grams||0}return{count:t,time:n,weight:r}};return(0,G.jsxs)(`div`,{className:`p-4 md:p-8`,children:[(0,G.jsx)(`div`,{className:`flex items-center justify-between mb-6`,children:(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(Zc,{className:`w-7 h-7 text-bambu-green`}),e(`queue.title`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:e(`queue.subtitle`)})]})}),(0,G.jsx)(`div`,{className:`flex gap-1 border-b border-bambu-dark-tertiary mb-6 overflow-x-auto`,children:[{id:`queue`,label:e(`queue.tabs.queue`),icon:js,count:je.length+Ne.length},{id:`batches`,label:e(`queue.tabs.batches`),icon:Sl,count:ue},{id:`history`,label:e(`queue.tabs.history`),icon:Zc,count:He.length},{id:`timeline`,label:e(`queue.tabs.timeline`),icon:ds,count:null},{id:`pipelines`,label:e(`queue.tabs.pipelines`),icon:$u,count:null}].map(({id:e,label:t,icon:n,count:r})=>(0,G.jsxs)(`button`,{onClick:()=>R(e),className:`px-4 py-2.5 text-sm flex items-center gap-2 border-b-2 -mb-px transition-colors whitespace-nowrap ${L===e?`text-white border-bambu-green font-medium`:`text-bambu-gray border-transparent hover:text-white`}`,children:[(0,G.jsx)(n,{className:`w-4 h-4`}),t,r!==null&&r>0&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded-full ${L===e?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:r})]},e))}),L!==`pipelines`&&L!==`batches`&&(0,G.jsx)(MHe,{activeCount:Ne.length,pendingCount:je.length,totalTime:Ue,totalWeight:We,historyCount:He.length,t:e}),L===`queue`&&nt.length>0&&r(`queue:update_all`)&&(0,G.jsx)(`div`,{className:`mb-4 space-y-2`,children:nt.map(({printerId:t,printerName:n,skippedCount:r})=>(0,G.jsxs)(`div`,{className:`flex items-center gap-3 px-4 py-3 bg-orange-50 dark:bg-orange-500/10 border border-orange-300 dark:border-orange-500/30 rounded-lg`,children:[(0,G.jsx)(ys,{className:`w-5 h-5 text-orange-600 dark:text-orange-400 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-sm text-orange-800 dark:text-orange-200`,children:e(`queue.resumeAfterFailure.banner`,{printer:n,count:r})}),(0,G.jsx)(`div`,{className:`text-xs text-orange-800/80 dark:text-orange-200/70 mt-0.5`,children:e(`queue.resumeAfterFailure.bannerHint`)})]}),(0,G.jsxs)(`button`,{onClick:()=>E({printerId:t,printerName:n,skippedCount:r}),className:`flex items-center gap-1.5 px-3 py-1.5 bg-orange-100 dark:bg-orange-500/20 hover:bg-orange-200 dark:hover:bg-orange-500/30 text-orange-900 dark:text-orange-100 text-sm rounded-md border border-orange-300 dark:border-orange-500/40 transition-colors flex-shrink-0`,children:[(0,G.jsx)(Ts,{className:`w-4 h-4`}),e(`queue.resumeAfterFailure.button`)]})]},t))}),L!==`pipelines`&&L!==`batches`&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 sm:gap-4 mb-6`,children:[(0,G.jsxs)(`select`,{className:`px-2 sm:px-3 py-2 text-sm sm:text-base bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none min-w-0 flex-1 sm:flex-none`,value:o===-1?`unassigned`:o||``,onChange:e=>{let t=e.target.value;s(t===`unassigned`?-1:t===``?null:Number(t))},children:[(0,G.jsx)(`option`,{value:``,children:e(`queue.filter.allPrinters`)}),(0,G.jsx)(`option`,{value:`unassigned`,children:e(`queue.filter.unassigned`)}),pe?.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]}),(0,G.jsxs)(`select`,{className:`px-2 sm:px-3 py-2 text-sm sm:text-base bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none min-w-0 flex-1 sm:flex-none`,value:c,onChange:e=>l(e.target.value),children:[(0,G.jsx)(`option`,{value:``,children:e(`queue.filter.allStatus`)}),(0,G.jsx)(`option`,{value:`pending`,children:e(`queue.status.pending`)}),(0,G.jsx)(`option`,{value:`printing`,children:e(`queue.status.printing`)}),(0,G.jsx)(`option`,{value:`completed`,children:e(`queue.status.completed`)}),(0,G.jsx)(`option`,{value:`failed`,children:e(`queue.status.failed`)}),(0,G.jsx)(`option`,{value:`skipped`,children:e(`queue.status.skipped`)}),(0,G.jsx)(`option`,{value:`cancelled`,children:e(`queue.status.cancelled`)})]}),ke.length>0&&(0,G.jsxs)(`select`,{className:`px-2 sm:px-3 py-2 text-sm sm:text-base bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none min-w-0 flex-1 sm:flex-none`,value:u,onChange:e=>d(e.target.value),children:[(0,G.jsx)(`option`,{value:``,children:e(`queue.filter.allLocations`)}),ke.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]}),(0,G.jsx)(`div`,{className:`hidden sm:block flex-1`}),L===`history`&&He.length>0&&(0,G.jsxs)(Q,{className:`w-full sm:w-auto`,variant:`secondary`,size:`sm`,onClick:()=>p(!0),disabled:!r(`queue:delete_all`),title:r(`queue:delete_all`)?void 0:e(`queue.permissions.noClearHistory`),children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),e(`queue.clearHistory`)]})]}),L===`queue`&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-3 mb-6`,children:[(0,G.jsxs)(`div`,{className:`inline-flex items-center bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg p-0.5`,children:[(0,G.jsxs)(`button`,{className:`px-3 py-1.5 text-xs sm:text-sm rounded-md transition-colors flex items-center gap-1.5 ${z===`position`?`bg-bambu-dark-tertiary text-white`:`text-bambu-gray hover:text-white`}`,onClick:()=>B(`position`),title:e(`queue.layout.flatList`),children:[(0,G.jsx)($c,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`queue.layout.flatList`)})]}),(0,G.jsxs)(`button`,{className:`px-3 py-1.5 text-xs sm:text-sm rounded-md transition-colors flex items-center gap-1.5 ${z===`printer`?`bg-bambu-dark-tertiary text-white`:`text-bambu-gray hover:text-white`}`,onClick:()=>B(`printer`),title:e(`queue.layout.groupByPrinter`),children:[(0,G.jsx)(Ll,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`queue.layout.byPrinter`)})]})]}),(0,G.jsxs)(`button`,{onClick:()=>{let e=!(H?.queue_shortest_first??!1);me.mutate(e)},className:`flex items-center gap-1 px-2 py-1.5 text-xs rounded-lg border transition-colors ${H?.queue_shortest_first?`bg-bambu-green/20 border-bambu-green text-bambu-green`:`bg-bambu-dark-secondary border-bambu-dark-tertiary text-bambu-gray hover:text-white hover:border-bambu-gray`}`,title:e(`queue.sjf.tooltip`,`Shortest Job First — scheduler prioritizes shorter prints`),children:[(0,G.jsx)(mu,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`queue.sjf.label`,`SJF`)}),(0,G.jsx)(`span`,{className:`w-1.5 h-1.5 rounded-full ${H?.queue_shortest_first?`bg-bambu-green`:`bg-bambu-gray`}`})]})]}),L===`pipelines`?(0,G.jsx)(DHe,{}):L===`batches`?(0,G.jsx)(BHe,{hasPermission:r,t:e}):fe?(0,G.jsx)(`div`,{className:`text-center py-12 text-bambu-gray`,children:e(`common.loading`)}):de?.length===0?(0,G.jsxs)(Ld,{className:`p-12 text-center border-dashed`,children:[(0,G.jsx)(as,{className:`w-16 h-16 text-bambu-gray mx-auto mb-4 opacity-50`}),(0,G.jsx)(`h3`,{className:`text-xl font-medium text-white mb-2`,children:e(`queue.empty.title`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray max-w-md mx-auto`,children:e(`queue.empty.description`)})]}):L===`timeline`?(0,G.jsx)(zHe,{queueItems:de||[],printers:pe||[],printerStatuses:Ve,sjfEnabled:H?.queue_shortest_first??!1,onItemClick:e=>{[`completed`,`failed`,`skipped`,`cancelled`].includes(e.status)?_(e):e.status===`pending`?h(e):e.status===`printing`&&b({type:`stop`,item:e})},t:e}):L===`history`?(0,G.jsx)(KHe,{items:He,collapsed:!1,visibleCount:j,onShowMore:()=>M(e=>e+h8),sortBy:D,sortAsc:k,onSortByChange:O,onSortAscToggle:()=>A(!k),onRemove:e=>b({type:`remove`,item:e}),onRequeue:_,timeFormat:ce,batchCollapsed:V,toggleBatchCollapsed:et,hasPermission:r,canModify:a,t:e}):(0,G.jsxs)(`div`,{className:`space-y-6 sm:space-y-8`,children:[Ne.length>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h2`,{className:`text-base sm:text-lg font-semibold text-white mb-3 sm:mb-4 flex items-center gap-2`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full bg-blue-400 animate-pulse`}),e(`queue.sections.currentlyPrinting`)]}),(0,G.jsx)(`div`,{className:`space-y-2 sm:space-y-3`,children:Ne.map(t=>(0,G.jsx)(p8,{item:t,onEdit:()=>{},onCancel:()=>{},onRemove:()=>{},onStop:()=>b({type:`stop`,item:t}),onRequeue:()=>{},onStart:()=>{},timeFormat:ce,hasPermission:r,canModify:a,printerState:t.printer_id?Be[t.printer_id]:null,t:e},t.id))})]}),je.length>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center justify-between gap-2 mb-3 sm:mb-4`,children:[(0,G.jsxs)(`h2`,{className:`text-base sm:text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(js,{className:`w-4 h-4 sm:w-5 sm:h-5 text-yellow-600 dark:text-yellow-400`}),e(`queue.sections.queued`),(0,G.jsxs)(`span`,{className:`text-xs sm:text-sm font-normal text-bambu-gray`,children:[`(`,e(`queue.itemCount`,{count:je.length}),`)`]}),(0,G.jsx)(`span`,{className:`hidden sm:inline text-xs text-bambu-gray ml-2`,title:e(`queue.reorderHint`),children:e(`queue.dragToReorder`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`select`,{className:`px-2 sm:px-3 py-1.5 text-xs sm:text-sm bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:N,onChange:e=>P(e.target.value),children:[(0,G.jsx)(`option`,{value:`position`,children:e(`queue.sort.byPosition`)}),(0,G.jsx)(`option`,{value:`name`,children:e(`queue.sort.byName`)}),(0,G.jsx)(`option`,{value:`printer`,children:e(`queue.sort.byPrinter`)}),(0,G.jsx)(`option`,{value:`time`,children:e(`queue.sort.bySchedule`)})]}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>I(!F),title:e(F?`common.ascending`:`common.descending`),className:`px-2`,children:F?(0,G.jsx)(Ho,{className:`w-4 h-4`}):(0,G.jsx)(Io,{className:`w-4 h-4`})})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 sm:gap-3 mb-3 sm:mb-4 p-2 sm:p-3 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:Me,className:`flex items-center gap-1.5 sm:gap-2 text-xs sm:text-sm`,children:[x.length===je.length&&je.length>0?(0,G.jsx)(_u,{className:`w-4 h-4 text-bambu-green`}):(0,G.jsx)(yu,{className:`w-4 h-4`}),x.length===je.length&&je.length>0?e(`queue.bulkEdit.deselectAll`):e(`queue.bulkEdit.selectAll`)]}),x.length>0&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{className:`text-xs sm:text-sm text-bambu-gray`,children:e(`queue.bulkEdit.selected`,{count:x.length})}),(0,G.jsx)(`div`,{className:`hidden sm:block h-4 w-px bg-bambu-dark-tertiary`}),$e&&(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:()=>ie(!0),className:`flex items-center gap-1.5 sm:gap-2 text-xs sm:text-sm text-cyan-700 dark:text-cyan-300 hover:text-cyan-900 dark:hover:text-cyan-200`,title:e(`queue.batch.groupAsBatch`),children:[(0,G.jsx)(Sl,{className:`w-3.5 h-3.5 sm:w-4 sm:h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`queue.batch.groupAsBatch`)})]}),(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:()=>w(!0),className:`flex items-center gap-1.5 sm:gap-2 text-xs sm:text-sm text-bambu-green hover:text-bambu-green-light`,disabled:!i(`queue:update_own`,`queue:update_all`),title:i(`queue:update_own`,`queue:update_all`)?e(`queue.bulkEdit.editSelected`):e(`queue.permissions.noEditItems`),children:[(0,G.jsx)(kl,{className:`w-3.5 h-3.5 sm:w-4 sm:h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`queue.bulkEdit.editSelected`)})]}),(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:()=>we.mutate(x),className:`flex items-center gap-1.5 sm:gap-2 text-xs sm:text-sm text-red-600 dark:text-red-400 hover:text-red-700 dark:hover:text-red-300`,disabled:we.isPending||!i(`queue:delete_own`,`queue:delete_all`),title:i(`queue:delete_own`,`queue:delete_all`)?e(`queue.bulkEdit.cancelSelected`):e(`queue.permissions.noCancelItems`),children:[(0,G.jsx)(td,{className:`w-3.5 h-3.5 sm:w-4 sm:h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`queue.bulkEdit.cancelSelected`)})]})]})]}),(0,G.jsxs)(I6,{sensors:se,collisionDetection:z3,onDragStart:Ge,onDragEnd:Ke,children:[(0,G.jsx)(K6,{items:Qe,strategy:hHe,children:z===`position`?(0,G.jsx)(`div`,{className:`space-y-2 sm:space-y-3`,children:qe.map((t,n)=>(0,G.jsx)(m8,{row:t,collapsed:t.kind===`batch`?V[t.batchId]??!0:!1,onToggleBatch:t.kind===`batch`?()=>et(t.batchId):void 0,onUngroup:t.kind===`batch`?()=>oe(t.batchId):void 0,setEditItem:h,setConfirmAction:b,startMutation:be,selectedItems:x,handleToggleSelect:Oe,timeFormat:ce,hasPermission:r,canModify:a,t:e,etaEligibleIds:Pe,etaNow:Fe,aggregateForRows:rt,...Ze(qe,n),onMoveBlock:Je?Xe:void 0},t.kind===`item`?`item-${t.item.id}`:`batch-${t.batchId}`))}):(0,G.jsx)(`div`,{className:`space-y-4`,children:tt.map(t=>{let n=rt(t.rows);return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-t-lg`,children:[(0,G.jsx)(Ll,{className:`w-4 h-4 ${t.isUnassigned?`text-orange-600 dark:text-orange-400`:t.targetModel?`text-blue-600 dark:text-blue-400`:`text-bambu-green`}`}),(0,G.jsx)(`span`,{className:`font-semibold text-white text-sm`,children:t.label}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray flex flex-wrap gap-x-3`,children:[(0,G.jsx)(`span`,{children:e(`queue.itemCount`,{count:n.count})}),n.time>0&&(0,G.jsx)(`span`,{children:op(n.time)}),n.weight>0&&(0,G.jsx)(`span`,{children:u8(n.weight)})]})]}),(0,G.jsx)(`div`,{className:`bg-bambu-dark/40 border border-t-0 border-bambu-dark-tertiary rounded-b-lg p-2 space-y-2`,children:t.rows.map((n,i)=>(0,G.jsx)(m8,{row:n,collapsed:n.kind===`batch`?V[n.batchId]??!0:!1,onToggleBatch:n.kind===`batch`?()=>et(n.batchId):void 0,onUngroup:n.kind===`batch`?()=>oe(n.batchId):void 0,setEditItem:h,setConfirmAction:b,startMutation:be,selectedItems:x,handleToggleSelect:Oe,timeFormat:ce,hasPermission:r,canModify:a,t:e,etaEligibleIds:Pe,etaNow:Fe,aggregateForRows:rt,...Ze(t.rows,i),onMoveBlock:Je?Xe:void 0},n.kind===`item`?`item-${n.item.id}`:`batch-${n.batchId}`))})]},t.key)})})}),(0,G.jsx)(dHe,{children:(()=>{if(te===null)return null;if(typeof te==`string`&&te.startsWith(`batch-`)){let t=Number(te.slice(6)),n=je.filter(e=>e.batch_id===t);if(n.length===0)return null;let r=n[0].batch_name||e(`queue.batch.defaultName`);return(0,G.jsxs)(`div`,{className:`flex items-center gap-3 px-3 py-2 bg-bambu-dark-secondary border-2 border-cyan-400 rounded-lg shadow-2xl`,children:[(0,G.jsx)(Sl,{className:`w-4 h-4 text-cyan-700 dark:text-cyan-300`}),(0,G.jsx)(`span`,{className:`text-sm text-white font-medium`,children:e(`queue.dragGhost.batch`,{defaultValue:`{{name}} ({{count}} copies)`,name:r,count:n.length})})]})}return typeof te==`number`&&x.includes(te)&&x.length>1?(0,G.jsxs)(`div`,{className:`flex items-center gap-3 px-3 py-2 bg-bambu-dark-secondary border-2 border-cyan-400 rounded-lg shadow-2xl`,children:[(0,G.jsx)(Sl,{className:`w-4 h-4 text-cyan-700 dark:text-cyan-300`}),(0,G.jsx)(`span`,{className:`text-sm text-white font-medium`,children:e(`queue.dragGhost.multiCount`,{count:x.length})})]}):null})()})]})]})]}),m&&(0,G.jsx)(qW,{mode:`edit-queue-item`,archiveId:m.archive_id??void 0,libraryFileId:m.library_file_id??void 0,archiveName:LT(m,t=>e(`common.plusNMore`,{count:t})),queueItem:m,onClose:()=>h(null)}),g&&(0,G.jsx)(qW,{mode:`create`,archiveId:g.archive_id??void 0,libraryFileId:g.library_file_id??void 0,archiveName:LT(g,t=>e(`common.plusNMore`,{count:t})),onClose:()=>_(null)}),ve&&(0,G.jsx)(rf,{title:e(`queue.filamentShort.confirmTitle`),message:e(`queue.filamentShort.confirmIntro`)+`
 
 `+ve.deficit.map(t=>e(`queue.filamentShort.lineItem`,{slot:t.slot_id,required:Math.round(t.required_grams),remaining:t.remaining_grams==null?e(`queue.filamentShort.unknown`):Math.round(t.remaining_grams)})).join(`
-`),confirmText:e(`queue.filamentShort.printAnyway`),variant:`warning`,onConfirm:()=>{be.mutate({id:ve.itemId,skipFilamentCheck:!0})},onCancel:()=>ye(null)}),v&&(0,G.jsx)(rf,{title:v.type===`cancel`?e(`queue.confirm.cancelTitle`):v.type===`stop`?e(`queue.confirm.stopTitle`):e(`queue.confirm.removeTitle`),message:v.type===`cancel`?e(`queue.confirm.cancelMessage`,{name:v.item.archive_name||v.item.library_file_name||e(`queue.confirm.thisPrint`)}):v.type===`stop`?e(`queue.confirm.stopMessage`,{name:v.item.archive_name||v.item.library_file_name||e(`queue.confirm.thisPrint`)}):e(`queue.confirm.removeMessage`,{name:v.item.archive_name||v.item.library_file_name||e(`queue.confirm.thisItem`)}),confirmText:v.type===`cancel`?e(`queue.confirm.cancelButton`):v.type===`stop`?e(`queue.confirm.stopButton`):e(`common.remove`),variant:`danger`,onConfirm:()=>{v.type===`cancel`?he.mutate(v.item.id):v.type===`stop`?_e.mutate(v.item.id):ge.mutate(v.item.id),b(null)},onCancel:()=>b(null)}),T&&(0,G.jsx)(rf,{title:e(`queue.resumeAfterFailure.confirmTitle`),message:e(`queue.resumeAfterFailure.confirmMessage`,{printer:T.printerName,count:T.skippedCount}),confirmText:e(`queue.resumeAfterFailure.button`),variant:`warning`,onConfirm:()=>Te.mutate(T.printerId),onCancel:()=>E(null)}),f&&(0,G.jsx)(rf,{title:e(`queue.confirm.clearHistoryTitle`),message:e(`queue.confirm.clearHistoryMessage`,{count:He.length}),confirmText:e(`queue.clearHistory`),variant:`danger`,onConfirm:()=>{Se.mutate(),p(!1)},onCancel:()=>p(!1)}),C&&(0,G.jsx)(UHe,{selectedCount:x.length,printers:pe?.map(e=>({id:e.id,name:e.name,nozzle_count:e.nozzle_count}))||[],onSave:e=>{Object.keys(e).length>0&&Ce.mutate({item_ids:x,...e})},onClose:()=>w(!1),isSaving:Ce.isPending,canControlPrinter:r(`printers:control`),hasGcodeSnippets:!!H?.gcode_snippets,t:e}),re&&(0,G.jsx)(qHe,{itemCount:x.length,isSaving:Ee.isPending,defaultName:(()=>{let t=je.find(e=>x.includes(e.id)),n=(t?.archive_name||t?.library_file_name||``).replace(/\.gcode\.3mf$/i,``).replace(/\.3mf$/i,``);return n?`${n}`:e(`queue.batch.defaultName`)})(),onSave:e=>Ee.mutate({name:e,item_ids:x}),onClose:()=>ie(!1),t:e}),ae!==null&&(0,G.jsx)(rf,{title:e(`queue.batch.ungroupConfirmTitle`),message:e(`queue.batch.ungroupConfirmMessage`),confirmText:e(`queue.batch.ungroup`),variant:`warning`,onConfirm:()=>De.mutate(ae),onCancel:()=>oe(null)})]})}function qHe({itemCount:e,defaultName:t,isSaving:n,onSave:r,onClose:i,t:a}){let[o,s]=(0,y.useState)(t);return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/60 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl p-6 w-full max-w-md`,children:[(0,G.jsxs)(`h3`,{className:`text-lg font-semibold text-white mb-2 flex items-center gap-2`,children:[(0,G.jsx)(Sl,{className:`w-5 h-5 text-cyan-700 dark:text-cyan-300`}),a(`queue.batch.groupAsBatch`)]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4`,children:a(`queue.batch.groupAsBatchDescription`,{count:e})}),(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:a(`queue.batch.nameLabel`)}),(0,G.jsx)(`input`,{type:`text`,autoFocus:!0,value:o,onChange:e=>s(e.target.value),placeholder:a(`queue.batch.namePlaceholder`),maxLength:120,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none mb-5`}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2`,children:[(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:i,disabled:n,children:a(`common.cancel`)}),(0,G.jsx)(Q,{variant:`primary`,size:`sm`,onClick:()=>{let e=o.trim();e&&r(e)},disabled:n||!o.trim(),children:a(n?`common.saving`:`queue.batch.create`)})]})]})})}function JHe({printDates:e,months:t=3}){let n=(0,y.useRef)(null),[r,i]=(0,y.useState)(0);(0,y.useEffect)(()=>{let e=n.current;if(!e)return;let t=new ResizeObserver(e=>{i(e[0]?.contentRect.width||0)});return t.observe(e),()=>t.disconnect()},[]);let{weeks:a,monthLabels:o,printCounts:s}=(0,y.useMemo)(()=>{let n={};e.forEach(e=>{let t=up(e);t&&(n[t]=(n[t]||0)+1)});let r=new Date,i=new Date(r);i.setMonth(i.getMonth()-t),i.setDate(i.getDate()-i.getDay());let a=[],o=[],s=[],c=-1,l=new Date(i),u=0;for(;l<=r;)l.getDay()===0&&s.length>0&&(a.push(s),s=[],u++),l.getMonth()!==c&&(o.push({month:l.toLocaleDateString(`en-US`,{month:`short`}),weekIndex:u}),c=l.getMonth()),s.push(new Date(l)),l.setDate(l.getDate()+1);return s.length>0&&a.push(s),{weeks:a,monthLabels:o,printCounts:n}},[e,t]),c=Math.max(1,...Object.values(s)),l=e=>{if(e===0)return`bg-bambu-dark`;let t=e/c;return t<=.25?`bg-bambu-green/30`:t<=.5?`bg-bambu-green/50`:t<=.75?`bg-bambu-green/75`:`bg-bambu-green`},u=[`Sun`,`Mon`,`Tue`,`Wed`,`Thu`,`Fri`,`Sat`],d=a.length,f=r-32-16,p=d>0?Math.floor((f-(d-1)*2)/d):12,m=Math.max(8,Math.min(20,p)),h=m<=10?10:12;return(0,G.jsx)(`div`,{ref:n,className:`w-full flex justify-center`,children:r>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`flex mb-1`,style:{marginLeft:36},children:o.map(({month:e,weekIndex:t},n)=>(0,G.jsx)(`div`,{className:`text-bambu-gray`,style:{fontSize:h,marginLeft:n===0?0:`${(t-(o[n-1]?.weekIndex||0))*(m+2)-24}px`},children:e},n))}),(0,G.jsxs)(`div`,{className:`flex`,style:{gap:2},children:[(0,G.jsx)(`div`,{className:`flex flex-col`,style:{gap:2,marginRight:4,width:32},children:u.map((e,t)=>(0,G.jsx)(`div`,{className:`text-bambu-gray flex items-center`,style:{width:32,height:m,fontSize:h,visibility:t%2==1?`visible`:`hidden`},children:e},e))}),a.map((e,t)=>(0,G.jsx)(`div`,{className:`flex flex-col`,style:{gap:2},children:[0,1,2,3,4,5,6].map(t=>{let n=e.find(e=>e.getDay()===t);if(!n)return(0,G.jsx)(`div`,{style:{width:m,height:m}},t);let r=up(n),i=s[r]||0,a=r===up(new Date);return(0,G.jsx)(`div`,{className:`rounded-sm ${l(i)} ${a?`ring-1 ring-white`:``}`,style:{width:m,height:m},title:`${n.toLocaleDateString()}: ${i} print${i===1?``:`s`}`},t)})},t))]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mt-3 text-bambu-gray`,style:{fontSize:h},children:[(0,G.jsx)(`span`,{children:`Less`}),(0,G.jsxs)(`div`,{className:`flex`,style:{gap:2},children:[(0,G.jsx)(`div`,{className:`rounded-sm bg-bambu-dark`,style:{width:m,height:m}}),(0,G.jsx)(`div`,{className:`rounded-sm bg-bambu-green/30`,style:{width:m,height:m}}),(0,G.jsx)(`div`,{className:`rounded-sm bg-bambu-green/50`,style:{width:m,height:m}}),(0,G.jsx)(`div`,{className:`rounded-sm bg-bambu-green/75`,style:{width:m,height:m}}),(0,G.jsx)(`div`,{className:`rounded-sm bg-bambu-green`,style:{width:m,height:m}})]}),(0,G.jsx)(`span`,{children:`More`})]})]})})}var p8=[`weight`,`prints`,`time`];function m8({value:e,onChange:t,exclude:n}){let{t:r}=U(),i={weight:r(`stats.filamentByWeight`),prints:r(`stats.filamentByPrints`),time:r(`stats.filamentByTime`)};return(0,G.jsx)(`div`,{className:`flex gap-0.5 bg-bambu-dark rounded-lg p-0.5`,children:(n?p8.filter(e=>!n.includes(e)):p8).map(n=>(0,G.jsx)(`button`,{onClick:()=>t(n),className:`px-2 py-0.5 text-xs rounded-md transition-colors ${e===n?`bg-bambu-green text-white`:`text-bambu-gray hover:text-white`}`,children:i[n]},n))})}function h8(e){if(e>=1e6){let t=e/1e6;return`${t%1==0?t.toFixed(0):t.toFixed(1)}t`}if(e>=1e3){let t=e/1e3;return`${t%1==0?t.toFixed(0):t.toFixed(1)}kg`}return`${Math.round(e)}g`}var g8=[`#00ae42`,`#3b82f6`,`#f59e0b`,`#ef4444`,`#8b5cf6`,`#ec4899`,`#14b8a6`,`#f97316`],YHe=[`Sun`,`Mon`,`Tue`,`Wed`,`Thu`,`Fri`,`Sat`],_8=[`12am`,`1am`,`2am`,`3am`,`4am`,`5am`,`6am`,`7am`,`8am`,`9am`,`10am`,`11am`,`12pm`,`1pm`,`2pm`,`3pm`,`4pm`,`5pm`,`6pm`,`7pm`,`8pm`,`9pm`,`10pm`,`11pm`];function XHe({archives:e,currency:t=`$`,dateFrom:n,dateTo:r}){let{t:i}=U(),[a,o]=(0,y.useState)(`weight`),[s,c]=(0,y.useState)(`weight`),l=(0,y.useMemo)(()=>{let t=new Map;return e.forEach(e=>{let n=ep(e.completed_at||e.created_at)||new Date,r=`${n.getFullYear()}-${String(n.getMonth()+1).padStart(2,`0`)}-${String(n.getDate()).padStart(2,`0`)}`,i=t.get(r)||{date:r,filament:0,cost:0,energy:0,prints:0};i.filament+=e.filament_used_grams||0,i.cost+=e.cost||0,i.energy+=e.energy_kwh||0,i.prints+=e.quantity??1,t.set(r,i)}),Array.from(t.values()).sort((e,t)=>e.date.localeCompare(t.date)).map(e=>({...e,dateLabel:new Date(e.date).toLocaleDateString(`en-US`,{month:`short`,day:`numeric`})}))},[e]),u=(0,y.useMemo)(()=>{if(n&&r)return Math.max((new Date(r).getTime()-new Date(n).getTime())/864e5,0)+1;if(n)return Math.max((Date.now()-new Date(n).getTime())/864e5,0)+1;if(e.length<2)return 0;let t=e.map(e=>new Date(e.completed_at||e.created_at).getTime());return(Math.max(...t)-Math.min(...t))/864e5},[e,n,r]),d=(0,y.useMemo)(()=>{if(u>7)return[];let t=new Map,n=u>1;return e.forEach(e=>{let n=ep(e.completed_at||e.created_at)||new Date,r=n.getHours(),i=`${n.getFullYear()}-${String(n.getMonth()+1).padStart(2,`0`)}-${String(n.getDate()).padStart(2,`0`)}T${String(r).padStart(2,`0`)}`,a=t.get(i)||{date:i,filament:0,cost:0,energy:0,prints:0};a.filament+=e.filament_used_grams||0,a.cost+=e.cost||0,a.energy+=e.energy_kwh||0,a.prints+=e.quantity??1,t.set(i,a)}),Array.from(t.values()).sort((e,t)=>e.date.localeCompare(t.date)).map(e=>{let[t,r]=e.date.split(`T`),i=new Date(t),a=parseInt(r,10),o=n?`${YHe[i.getDay()]} ${_8[a]}`:_8[a];return{...e,dateLabel:o}})},[e,u]),f=(0,y.useMemo)(()=>{if(l.length<=60)return l;let e=new Map;return l.forEach(t=>{let n=new Date(t.date),r=new Date(n);r.setDate(n.getDate()-n.getDay());let i=`${r.getFullYear()}-${String(r.getMonth()+1).padStart(2,`0`)}-${String(r.getDate()).padStart(2,`0`)}`,a=e.get(i)||{week:i,filament:0,cost:0,energy:0,prints:0};a.filament+=t.filament,a.cost+=t.cost,a.energy+=t.energy,a.prints+=t.prints,e.set(i,a)}),Array.from(e.values()).sort((e,t)=>e.week.localeCompare(t.week)).map(e=>({date:e.week,dateLabel:`Week of ${new Date(e.week).toLocaleDateString(`en-US`,{month:`short`,day:`numeric`})}`,...e}))},[l]),p=(0,y.useMemo)(()=>{let t=new Map;return e.forEach(e=>{let n=(e.filament_type||`Unknown`).split(`, `);n.forEach(r=>{let i=(e.filament_used_grams||0)/n.length;t.set(r,(t.get(r)||0)+i)})}),Array.from(t.entries()).map(([e,t])=>({name:e,value:Math.round(t)})).sort((e,t)=>t.value-e.value)},[e]),m=(0,y.useMemo)(()=>{let t=new Map;return e.forEach(e=>{(e.filament_type||`Unknown`).split(`, `).forEach(e=>{t.set(e,(t.get(e)||0)+1)})}),Array.from(t.entries()).map(([e,t])=>({name:e,value:t})).sort((e,t)=>t.value-e.value)},[e]),h=(0,y.useMemo)(()=>{let t=new Map;return e.forEach(e=>{let n=(e.filament_type||`Unknown`).split(`, `),r=(e.actual_time_seconds||e.print_time_seconds||0)/n.length;n.forEach(e=>{t.set(e,(t.get(e)||0)+r)})}),Array.from(t.entries()).map(([e,t])=>({name:e,value:Math.round(t/3600*10)/10})).sort((e,t)=>t.value-e.value)},[e]),g=(0,y.useMemo)(()=>{let t=new Map;return e.forEach(e=>{e.status!==`completed`&&e.status!==`failed`||(e.filament_type||`Unknown`).split(`, `).forEach(n=>{let r=t.get(n)||{completed:0,failed:0};e.status===`completed`?r.completed++:r.failed++,t.set(n,r)})}),Array.from(t.entries()).filter(([,e])=>e.completed+e.failed>=2).map(([e,t])=>{let n=t.completed+t.failed;return{name:e,rate:Math.round(t.completed/n*100),total:n}}).sort((e,t)=>t.rate-e.rate)},[e]),_=(0,y.useMemo)(()=>{let t=new Map;return e.forEach(e=>{if(!e.filament_color)return;let n=e.filament_color.split(`,`).map(e=>e.trim()),r=(e.filament_used_grams||0)/n.length;n.forEach(e=>{let n=t.get(e)||{count:0,weight:0};n.count++,n.weight+=r,t.set(e,n)})}),Array.from(t.entries()).map(([e,t])=>({hex:e,value:s===`prints`?t.count:Math.round(t.weight)})).sort((e,t)=>t.value-e.value)},[e,s]),v=a===`weight`?p:a===`prints`?m:h,b=u<=7&&d.length>0?d:f,x=e.reduce((e,t)=>e+(t.filament_used_grams||0),0),S=e.reduce((e,t)=>e+(t.cost||0),0),C=e.reduce((e,t)=>e+(t.energy_kwh||0),0),w=e.reduce((e,t)=>e+(t.energy_cost||0),0),T=e.reduce((e,t)=>e+(t.quantity??1),0),E=new Set(e.map(e=>e.printer_id).filter(Boolean)).size;return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-3 gap-2 max-[640px]:grid-cols-1`,children:[(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray leading-none`,children:i(`stats.periodFilament`)}),(0,G.jsx)(`p`,{className:`text-2xl font-bold text-white leading-none`,children:h8(x)})]}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[E,` `,i(`nav.printers`).toLowerCase()]})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray leading-none`,children:i(`stats.periodCost`)}),(0,G.jsxs)(`p`,{className:`text-2xl font-bold text-white leading-none`,children:[t,S.toFixed(2)]})]}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[T,` `,i(`common.prints`)]})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray leading-none`,children:i(`stats.avgPerPrint`)}),(0,G.jsxs)(`p`,{className:`text-2xl font-bold text-white leading-none`,children:[T>0?(x/T).toFixed(0):0,`g`]})]}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[t,T>0?(S/T).toFixed(2):`0.00`,` avg`]})]})]}),b.length>0?(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray mb-4`,children:i(`stats.usageOverTime`)}),(0,G.jsx)(lA,{width:`100%`,height:250,children:(0,G.jsxs)(pU,{data:b,children:[(0,G.jsx)(`defs`,{children:(0,G.jsxs)(`linearGradient`,{id:`colorFilament`,x1:`0`,y1:`0`,x2:`0`,y2:`1`,children:[(0,G.jsx)(`stop`,{offset:`5%`,stopColor:`#00ae42`,stopOpacity:.3}),(0,G.jsx)(`stop`,{offset:`95%`,stopColor:`#00ae42`,stopOpacity:0})]})}),(0,G.jsx)(yV,{strokeDasharray:`3 3`,stroke:`#3d3d3d`}),(0,G.jsx)(CH,{dataKey:`dateLabel`,stroke:`#9ca3af`,tick:{fontSize:12},interval:`preserveStartEnd`}),(0,G.jsx)(OH,{stroke:`#9ca3af`,tick:{fontSize:12},tickFormatter:e=>`${e}g`}),(0,G.jsx)(tz,{contentStyle:{backgroundColor:`#2d2d2d`,border:`1px solid #3d3d3d`,borderRadius:`8px`},labelStyle:{color:`#fff`},formatter:e=>[`${Number(e??0).toFixed(0)}g`,`Filament`]}),(0,G.jsx)(tH,{type:`monotone`,dataKey:`filament`,stroke:`#00ae42`,strokeWidth:2,fillOpacity:1,fill:`url(#colorFilament)`})]})})]}):(0,G.jsx)(`div`,{className:`bg-bambu-dark rounded-lg p-8 text-center text-bambu-gray`,children:i(`stats.noPrintDataInRange`)}),C>0&&b.length>0&&(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-4`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray`,children:i(`stats.energyOverTime`)}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[C.toFixed(3),` kWh · `,t,w.toFixed(2)]})]}),(0,G.jsx)(lA,{width:`100%`,height:250,children:(0,G.jsxs)(pU,{data:b,children:[(0,G.jsx)(`defs`,{children:(0,G.jsxs)(`linearGradient`,{id:`colorEnergy`,x1:`0`,y1:`0`,x2:`0`,y2:`1`,children:[(0,G.jsx)(`stop`,{offset:`5%`,stopColor:`#f59e0b`,stopOpacity:.3}),(0,G.jsx)(`stop`,{offset:`95%`,stopColor:`#f59e0b`,stopOpacity:0})]})}),(0,G.jsx)(yV,{strokeDasharray:`3 3`,stroke:`#3d3d3d`}),(0,G.jsx)(CH,{dataKey:`dateLabel`,stroke:`#9ca3af`,tick:{fontSize:12},interval:`preserveStartEnd`}),(0,G.jsx)(OH,{stroke:`#9ca3af`,tick:{fontSize:12},tickFormatter:e=>`${e}kWh`}),(0,G.jsx)(tz,{contentStyle:{backgroundColor:`#2d2d2d`,border:`1px solid #3d3d3d`,borderRadius:`8px`},labelStyle:{color:`#fff`},formatter:e=>[`${Number(e??0).toFixed(3)} kWh`,i(`stats.energyUsed`)]}),(0,G.jsx)(tH,{type:`monotone`,dataKey:`energy`,stroke:`#f59e0b`,strokeWidth:2,fillOpacity:1,fill:`url(#colorEnergy)`})]})})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 lg:grid-cols-3 gap-4`,children:[(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-4`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray`,children:i(`stats.byMaterial`)}),(0,G.jsx)(m8,{value:a,onChange:o})]}),v.length>0?(0,G.jsxs)(`div`,{className:`flex items-center gap-4`,children:[(0,G.jsx)(lA,{width:160,height:160,children:(0,G.jsxs)(fU,{children:[(0,G.jsx)(PB,{data:v,cx:`50%`,cy:`50%`,innerRadius:40,outerRadius:70,paddingAngle:2,dataKey:`value`,children:v.map((e,t)=>(0,G.jsx)(nz,{fill:g8[t%g8.length]},`cell-${t}`))}),(0,G.jsx)(tz,{contentStyle:{backgroundColor:`#2d2d2d`,border:`1px solid #3d3d3d`,borderRadius:`8px`},formatter:e=>[a===`weight`?h8(Number(e??0)):a===`time`?`${Number(e??0)}h`:`${e??0}`,a===`weight`?`Usage`:a===`time`?`Time`:`Prints`]})]})}),(0,G.jsx)(`div`,{className:`flex-1 space-y-2 overflow-hidden`,children:v.map((e,t)=>{let n=v.reduce((e,t)=>e+t.value,0),r=n>0?(e.value/n*100).toFixed(0):0;return(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(`div`,{className:`w-3 h-3 rounded-sm flex-shrink-0`,style:{backgroundColor:g8[t%g8.length]}}),(0,G.jsx)(`span`,{className:`text-white truncate flex-1`,children:e.name}),(0,G.jsxs)(`span`,{className:`text-bambu-gray flex-shrink-0`,children:[a===`weight`?h8(e.value):a===`time`?`${e.value}h`:e.value,` · `,r,`%`]})]},e.name)})})]}):(0,G.jsx)(`div`,{className:`h-[160px] flex items-center justify-center text-bambu-gray`,children:i(`stats.noFilamentData`)})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray mb-4`,children:i(`stats.filamentSuccess`)}),g.length>0?(0,G.jsx)(`div`,{className:`space-y-1.5`,children:g.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(`span`,{className:`text-white truncate w-20 flex-shrink-0`,children:e.name}),(0,G.jsx)(`div`,{className:`flex-1 h-1.5 bg-bambu-dark-secondary rounded-full`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full transition-all ${e.rate>=90?`bg-status-ok`:e.rate>=70?`bg-status-warning`:`bg-status-error`}`,style:{width:`${e.rate}%`}})}),(0,G.jsxs)(`span`,{className:`font-medium flex-shrink-0 tabular-nums ${e.rate>=90?`text-status-ok`:e.rate>=70?`text-status-warning`:`text-status-error`}`,children:[e.rate,`%`]}),(0,G.jsxs)(`span`,{className:`text-bambu-gray flex-shrink-0 text-xs`,children:[`(`,e.total,`)`]})]},e.name))}):(0,G.jsx)(`div`,{className:`h-[160px] flex items-center justify-center text-bambu-gray`,children:i(`stats.noArchiveData`)})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-4`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray`,children:i(`stats.colorDistribution`)}),(0,G.jsx)(m8,{value:s,onChange:c,exclude:[`time`]})]}),_.length>0?(()=>{let e=_.reduce((e,t)=>e+t.value,0);return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`relative mx-auto`,style:{width:160,height:160},children:[(0,G.jsx)(lA,{width:`100%`,height:`100%`,children:(0,G.jsxs)(fU,{children:[(0,G.jsx)(PB,{data:_,cx:`50%`,cy:`50%`,innerRadius:45,outerRadius:70,paddingAngle:2,dataKey:`value`,children:_.map((e,t)=>(0,G.jsx)(nz,{fill:e.hex,stroke:`#1a1a1a`,strokeWidth:1},`color-${t}`))}),(0,G.jsx)(tz,{contentStyle:{backgroundColor:`#2d2d2d`,border:`1px solid #3d3d3d`,borderRadius:`8px`},formatter:e=>[s===`weight`?h8(Number(e??0)):`${e??0}`,i(s===`weight`?`stats.filamentByWeight`:`stats.filamentByPrints`)]})]})}),(0,G.jsxs)(`div`,{className:`absolute inset-0 flex flex-col items-center justify-center`,children:[(0,G.jsx)(`span`,{className:`text-lg font-bold text-white`,children:s===`weight`?h8(e):e}),(0,G.jsxs)(`span`,{className:`text-[10px] text-bambu-gray`,children:[_.length,` `,_.length===1?`color`:`colors`]})]})]}),(0,G.jsx)(`div`,{className:`grid grid-cols-2 gap-x-3 gap-y-1 mt-2`,children:_.slice(0,8).map(t=>{let n=e>0?(t.value/e*100).toFixed(0):0;return(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-xs min-w-0`,children:[(0,G.jsx)(`div`,{className:`w-2.5 h-2.5 rounded-full flex-shrink-0 border border-black/20`,style:{backgroundColor:t.hex}}),(0,G.jsxs)(`span`,{className:`text-bambu-gray truncate`,children:[n,`%`]})]},t.hex)})}),_.length>8&&(0,G.jsxs)(`p`,{className:`text-[10px] text-bambu-gray mt-1 text-center`,children:[`+`,_.length-8,` more`]})]})})():(0,G.jsx)(`div`,{className:`h-[160px] flex items-center justify-center text-bambu-gray`,children:i(`stats.noColorData`)})]})]})]})}function ZHe({id:e,title:t,component:n,isHidden:r,size:i,columnSpan:a,onToggleVisibility:o,onToggleSize:s}){let{attributes:c,listeners:l,setNodeRef:u,transform:d,transition:f,isDragging:p}=G6({id:e}),m={transform:C3.Transform.toString(d),transition:f,opacity:p?.5:1};return r?null:(0,G.jsxs)(`div`,{ref:u,style:{...m,gridColumn:`span ${a}`},className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary overflow-hidden ${p?`ring-2 ring-bambu-green shadow-lg`:``}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-4 py-3 border-b border-bambu-dark-tertiary bg-bambu-dark/30`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`button`,{...c,...l,className:`cursor-grab active:cursor-grabbing p-1 hover:bg-bambu-dark-tertiary rounded transition-colors`,title:`Drag to reorder`,children:(0,G.jsx)(Ac,{className:`w-6 h-6 md:w-4 md:h-4 text-bambu-gray`})}),(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white`,children:t})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`button`,{onClick:s,className:`p-1 hover:bg-bambu-dark-tertiary rounded transition-colors`,title:`Size: ${i===1?`1/4`:i===2?`1/2`:`Full`} - Click to cycle`,children:i===4?(0,G.jsx)(dl,{className:`w-4 h-4 text-bambu-gray hover:text-white`}):(0,G.jsx)(sl,{className:`w-4 h-4 text-bambu-gray hover:text-white`})}),(0,G.jsx)(`button`,{onClick:o,className:`p-1 hover:bg-bambu-dark-tertiary rounded transition-colors`,title:`Hide widget`,children:(0,G.jsx)(rc,{className:`w-4 h-4 text-bambu-gray hover:text-white`})})]})]}),(0,G.jsx)(`div`,{className:`p-4`,children:typeof n==`function`?n(i):n})]})}function QHe({widgets:e,storageKey:t,columns:n=4,stackBelow:r,hideControls:i=!1,onResetLayout:a,renderControls:o}){let s=()=>{let t={};return e.forEach(e=>{t[e.id]=e.defaultSize||4}),t},[c,l]=(0,y.useState)(()=>{let n=localStorage.getItem(t);if(n)try{let e=JSON.parse(n);if(!e.sizes)e.sizes=s();else{let t=s();for(let n in t)n in e.sizes||(e.sizes[n]=t[n])}return e}catch{}return{order:e.map(e=>e.id),hidden:e.filter(e=>e.defaultVisible===!1).map(e=>e.id),sizes:s()}}),[u,d]=(0,y.useState)(!1),[f,p]=(0,y.useState)(!1);(0,y.useEffect)(()=>{if(!r)return;let e=window.matchMedia(`(max-width: ${r}px)`),t=e=>{p(e.matches)};t(e);let n=e=>t(e);return e.addEventListener?e.addEventListener(`change`,n):e.addListener(n),()=>{e.removeEventListener?e.removeEventListener(`change`,n):e.removeListener(n)}},[r]);let m=r&&f?1:n;(0,y.useEffect)(()=>{let e=()=>d(e=>!e);return window.addEventListener(`toggle-hidden-panel`,e),()=>window.removeEventListener(`toggle-hidden-panel`,e)},[]),(0,y.useEffect)(()=>{localStorage.setItem(t,JSON.stringify(c))},[c,t]),(0,y.useEffect)(()=>{let t=e.map(e=>e.id).filter(e=>!c.order.includes(e));t.length>0&&l(e=>({...e,order:[...e.order,...t]}))},[e,c.order]);let h=k3(O3(l6,{activationConstraint:{distance:8}}),O3(a6,{coordinateGetter:q6})),g=e=>{let{active:t,over:n}=e;n&&t.id!==n.id&&l(e=>{let r=e.order.indexOf(t.id),i=e.order.indexOf(n.id);return{...e,order:L6(e.order,r,i)}})},_=e=>{l(t=>({...t,hidden:t.hidden.includes(e)?t.hidden.filter(t=>t!==e):[...t.hidden,e]}))},v=e=>{l(t=>{let n=t.sizes[e]||4,r=n===1?2:n===2?4:1;return{...t,sizes:{...t.sizes,[e]:r}}})},b=()=>{l({order:e.map(e=>e.id),hidden:e.filter(e=>e.defaultVisible===!1).map(e=>e.id),sizes:s()}),a?.()},x=c.order.map(t=>e.find(e=>e.id===t)).filter(Boolean),S=x.filter(e=>!c.hidden.includes(e.id)),C=x.filter(e=>c.hidden.includes(e.id)),w=o?.({hiddenCount:C.length,showHiddenPanel:u,setShowHiddenPanel:d,resetLayout:b});return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[w,!i&&!o&&(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-2`,children:[(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:b,children:[(0,G.jsx)(Ul,{className:`w-4 h-4`}),`Reset Layout`]}),C.length>0&&(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>d(!u),children:[(0,G.jsx)(ic,{className:`w-4 h-4`}),C.length,` Hidden`]})]}),u&&C.length>0&&(0,G.jsxs)(`div`,{className:`p-4 bg-bambu-dark rounded-xl border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-3`,children:`Hidden widgets (click to show):`}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-2`,children:C.map(e=>(0,G.jsxs)(`button`,{onClick:()=>_(e.id),className:`px-3 py-1.5 bg-bambu-dark-tertiary hover:bg-bambu-green/20 rounded-lg text-sm text-white transition-colors flex items-center gap-2`,children:[(0,G.jsx)(ic,{className:`w-3 h-3`}),e.title]},e.id))})]}),(0,G.jsx)(N6,{sensors:h,collisionDetection:I3,onDragEnd:g,children:(0,G.jsx)(U6,{items:S.map(e=>e.id),strategy:z6,children:(0,G.jsx)(`div`,{className:`grid gap-6`,style:{gridTemplateColumns:`repeat(${m}, minmax(0, 1fr))`},children:S.map(e=>{let t=c.sizes[e.id]||2,n=Math.min(t,m);return(0,G.jsx)(ZHe,{id:e.id,title:e.title,component:e.component,isHidden:c.hidden.includes(e.id),size:t,columnSpan:n,onToggleVisibility:()=>_(e.id),onToggleSize:()=>v(e.id)},e.id)})})})}),S.length===0&&(0,G.jsxs)(`div`,{className:`text-center py-12 text-bambu-gray`,children:[(0,G.jsx)(`p`,{children:`All widgets are hidden.`}),(0,G.jsx)(Q,{className:`mt-4`,onClick:b,children:`Reset Layout`})]})]})}function $He(e){let t=new Date,n=t.getUTCFullYear(),r=t.getUTCMonth(),i=t.getUTCDate(),a=e=>e.toISOString().split(`T`)[0],o=a(t);switch(e){case`today`:return{dateFrom:o,dateTo:o};case`this-week`:{let e=t.getUTCDay();return{dateFrom:a(new Date(Date.UTC(n,r,i-(e===0?6:e-1)))),dateTo:o}}case`this-month`:return{dateFrom:a(new Date(Date.UTC(n,r,1))),dateTo:o};case`last-7`:return{dateFrom:a(new Date(Date.UTC(n,r,i-6))),dateTo:o};case`last-30`:return{dateFrom:a(new Date(Date.UTC(n,r,i-29))),dateTo:o};case`last-90`:return{dateFrom:a(new Date(Date.UTC(n,r,i-89))),dateTo:o};case`this-year`:return{dateFrom:a(new Date(Date.UTC(n,0,1))),dateTo:o};case`all-time`:return{dateFrom:void 0,dateTo:void 0};case`custom`:return{}}}var eUe=[`today`,`this-week`,`this-month`,`last-7`,`last-30`,`last-90`,`this-year`,`all-time`],tUe=[`Mon`,`Tue`,`Wed`,`Thu`,`Fri`,`Sat`,`Sun`],v8=[`12am`,`1am`,`2am`,`3am`,`4am`,`5am`,`6am`,`7am`,`8am`,`9am`,`10am`,`11am`,`12pm`,`1pm`,`2pm`,`3pm`,`4pm`,`5pm`,`6pm`,`7pm`,`8pm`,`9pm`,`10pm`,`11pm`],y8=[{key:`<30m`,max:1800},{key:`30m-1h`,max:3600},{key:`1-2h`,max:7200},{key:`2-4h`,max:14400},{key:`4-8h`,max:28800},{key:`8-12h`,max:43200},{key:`12-24h`,max:86400},{key:`24h+`,max:1/0}],b8={backgroundColor:`#2d2d2d`,border:`1px solid #3d3d3d`,borderRadius:`8px`};function nUe({stats:e,currency:t}){let{t:n}=U(),r=e?.energy_data_warming_up===!0,i=r?n(`stats.energyWarmingUpTooltip`):void 0;return(0,G.jsx)(`div`,{className:`grid grid-cols-2 sm:grid-cols-3 gap-4`,children:[{icon:Sl,color:`text-bambu-green`,label:n(`stats.totalPrints`),value:`${e?.total_prints||0}`},{icon:js,color:`text-blue-600 dark:text-blue-400`,label:n(`stats.printTime`),value:`${e?.total_print_time_hours?.toFixed(1)??`0`}h`},{icon:Sl,color:`text-orange-600 dark:text-orange-400`,label:n(`stats.filamentUsed`),value:h8(e?.total_filament_grams||0)},{icon:Ks,color:`text-green-600 dark:text-green-400`,label:n(`stats.filamentCost`),value:`${t} ${e?.total_cost?.toFixed(2)??`0.00`}`},{icon:rd,color:`text-yellow-600 dark:text-yellow-400`,label:n(`stats.energyUsed`),value:`${e?.total_energy_kwh?.toFixed(3)??`0.000`} kWh`,warning:r,tooltip:i},{icon:Ks,color:`text-yellow-500`,label:n(`stats.energyCost`),value:`${t} ${e?.total_energy_cost?.toFixed(2)??`0.00`}`,warning:r,tooltip:i}].map(e=>(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,title:e.tooltip,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg bg-bambu-dark ${e.color}`,children:(0,G.jsx)(e.icon,{className:`w-5 h-5`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray flex items-center gap-1`,children:[e.label,e.warning&&(0,G.jsx)(Iu,{className:`w-3 h-3 text-yellow-600 dark:text-yellow-400`,"aria-label":e.tooltip})]}),(0,G.jsx)(`p`,{className:`text-xl font-bold text-white`,children:e.value})]})]},e.label))})}function rUe({stats:e,printerMap:t,size:n=1}){let{t:r}=U(),i=(e?.successful_prints||0)+(e?.failed_prints||0),a=i?Math.round((e?.successful_prints||0)/i*100):0,o=n===1?112:n===2?128:144,s=o/2-8,c=s*2*Math.PI;return(0,G.jsxs)(`div`,{className:`flex items-center gap-6`,children:[(0,G.jsxs)(`div`,{className:`relative flex-shrink-0`,style:{width:o,height:o},children:[(0,G.jsxs)(`svg`,{className:`w-full h-full -rotate-90`,children:[(0,G.jsx)(`circle`,{cx:o/2,cy:o/2,r:s,fill:`none`,stroke:`#3d3d3d`,strokeWidth:`10`}),(0,G.jsx)(`circle`,{cx:o/2,cy:o/2,r:s,fill:`none`,stroke:`#00ae42`,strokeWidth:`10`,strokeLinecap:`round`,strokeDasharray:`${a/100*c} ${c}`})]}),(0,G.jsx)(`div`,{className:`absolute inset-0 flex items-center justify-center`,children:(0,G.jsxs)(`span`,{className:`font-bold text-white ${n>=2?`text-2xl`:`text-xl`}`,children:[a,`%`]})})]}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(xs,{className:`w-4 h-4 text-status-ok flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:r(`stats.successful`)}),(0,G.jsx)(`span`,{className:`text-sm text-white font-medium`,children:e?.successful_prints||0})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Ds,{className:`w-4 h-4 text-status-error flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:r(`stats.failed`)}),(0,G.jsx)(`span`,{className:`text-sm text-white font-medium`,children:e?.failed_prints||0})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Uo,{className:`w-4 h-4 text-status-warning flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:r(`stats.cancelled`)}),(0,G.jsx)(`span`,{className:`text-sm text-white font-medium`,children:e?.cancelled_prints||0})]})]}),n>=2&&e?.prints_by_printer&&Object.keys(e.prints_by_printer).length>0&&(0,G.jsxs)(`div`,{className:`mt-4 pt-4 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray font-medium mb-2`,children:r(`stats.printsByPrinter`)}),(0,G.jsx)(`div`,{className:`grid gap-x-6 gap-y-1 ${n===4?`grid-cols-3`:`grid-cols-2`}`,style:{width:`fit-content`},children:Object.entries(e.prints_by_printer).map(([e,n])=>(0,G.jsxs)(`div`,{className:`flex items-center gap-3 text-sm`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray truncate max-w-[120px]`,children:t.get(e)||`${r(`common.printer`)} ${e}`}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:n})]},e))})]})]})]})}function iUe({stats:e,printerMap:t,size:n=1}){let{t:r}=U(),i=e?.average_time_accuracy;if(i==null)return(0,G.jsx)(`div`,{className:`flex items-center justify-center h-full`,children:(0,G.jsx)(`p`,{className:`text-bambu-gray text-center py-4`,children:r(`stats.noTimeAccuracyData`)})});let a=(Math.min(150,Math.max(50,i))-50)/100*100,o=(e=>e>=95&&e<=105?`#00ae42`:e>105?`#3b82f6`:`#f97316`)(i),s=i-100,c=n===1?112:n===2?128:144,l=c/2-8,u=l*2*Math.PI,d=n===1?3:n===2?6:999,f=e?.time_accuracy_by_printer?Object.entries(e.time_accuracy_by_printer).slice(0,d):[];return(0,G.jsxs)(`div`,{className:`flex items-center gap-6`,children:[(0,G.jsxs)(`div`,{className:`relative flex-shrink-0`,style:{width:c,height:c},children:[(0,G.jsxs)(`svg`,{className:`w-full h-full -rotate-90`,children:[(0,G.jsx)(`circle`,{cx:c/2,cy:c/2,r:l,fill:`none`,stroke:`#3d3d3d`,strokeWidth:`10`}),(0,G.jsx)(`circle`,{cx:c/2,cy:c/2,r:l,fill:`none`,stroke:o,strokeWidth:`10`,strokeLinecap:`round`,strokeDasharray:`${a/100*u} ${u}`})]}),(0,G.jsxs)(`div`,{className:`absolute inset-0 flex flex-col items-center justify-center`,children:[(0,G.jsxs)(`span`,{className:`font-bold text-white ${n>=2?`text-2xl`:`text-xl`}`,children:[i.toFixed(0),`%`]}),(0,G.jsxs)(`span`,{className:`text-xs ${s>=0?`text-blue-700 dark:text-blue-400`:`text-orange-700 dark:text-orange-400`}`,children:[s>=0?`+`:``,s.toFixed(0),`%`]})]})]}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-xs text-bambu-gray`,children:[(0,G.jsx)(Eu,{className:`w-3 h-3 flex-shrink-0`}),(0,G.jsx)(`span`,{children:r(`stats.perfectEstimate`)})]}),f.length>0&&(0,G.jsx)(`div`,{className:`mt-2 ${n===4?`grid grid-cols-3 gap-x-6 gap-y-1`:n===2?`grid grid-cols-2 gap-x-6 gap-y-1`:`space-y-1`}`,style:{width:`fit-content`},children:f.map(([e,n])=>(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-xs`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray truncate max-w-[100px]`,children:t.get(e)||`${r(`common.printer`)} ${e}`}),(0,G.jsxs)(`span`,{className:`font-medium ${n>=95&&n<=105?`text-status-ok`:n>105?`text-blue-700 dark:text-blue-400`:`text-status-warning`}`,children:[n.toFixed(0),`%`]})]},e))})]})]})}function aUe({printDates:e,dateFrom:t,dateTo:n}){let{days:r,hourlyCounts:i,maxCount:a}=(0,y.useMemo)(()=>{let r=new Date(t+`T00:00:00`),i=new Date(n+`T00:00:00`),a=[],o=e=>`${e.getFullYear()}-${String(e.getMonth()+1).padStart(2,`0`)}-${String(e.getDate()).padStart(2,`0`)}`,s=new Date(r);for(;s<=i;)a.push({key:o(s),label:s.toLocaleDateString(void 0,{weekday:`short`,month:`short`,day:`numeric`})}),s.setDate(s.getDate()+1);let c={},l=0;return e.forEach(e=>{let t=ep(e);if(!t)return;let n=`${`${t.getFullYear()}-${String(t.getMonth()+1).padStart(2,`0`)}-${String(t.getDate()).padStart(2,`0`)}`}-${t.getHours()}`;c[n]=(c[n]||0)+1,c[n]>l&&(l=c[n])}),{days:a,hourlyCounts:c,maxCount:Math.max(1,l)}},[e,t,n]),o=e=>{if(e===0)return`bg-bambu-dark`;let t=e/a;return t<=.25?`bg-bambu-green/30`:t<=.5?`bg-bambu-green/50`:t<=.75?`bg-bambu-green/75`:`bg-bambu-green`};return(0,G.jsxs)(`div`,{className:`w-full overflow-x-auto`,children:[(0,G.jsxs)(`div`,{className:`inline-flex flex-col`,style:{gap:2},children:[(0,G.jsx)(`div`,{className:`flex`,style:{gap:2,marginLeft:84},children:v8.map((e,t)=>(0,G.jsx)(`div`,{className:`text-bambu-gray text-[10px] text-center`,style:{width:20,visibility:t%2==0?`visible`:`hidden`},children:e},t))}),r.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center`,style:{gap:2},children:[(0,G.jsx)(`div`,{className:`text-bambu-gray text-[10px] flex-shrink-0 truncate`,style:{width:80},children:e.label}),Array.from({length:24},(t,n)=>{let r=i[`${e.key}-${n}`]||0;return(0,G.jsx)(`div`,{className:`rounded-sm ${o(r)}`,style:{width:20,height:20},title:`${e.label} ${v8[n]}: ${r} print${r===1?``:`s`}`},n)})]},e.key))]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mt-3 text-bambu-gray text-xs`,children:[(0,G.jsx)(`span`,{children:`Less`}),(0,G.jsxs)(`div`,{className:`flex`,style:{gap:2},children:[(0,G.jsx)(`div`,{className:`rounded-sm bg-bambu-dark`,style:{width:20,height:20}}),(0,G.jsx)(`div`,{className:`rounded-sm bg-bambu-green/30`,style:{width:20,height:20}}),(0,G.jsx)(`div`,{className:`rounded-sm bg-bambu-green/50`,style:{width:20,height:20}}),(0,G.jsx)(`div`,{className:`rounded-sm bg-bambu-green/75`,style:{width:20,height:20}}),(0,G.jsx)(`div`,{className:`rounded-sm bg-bambu-green`,style:{width:20,height:20}})]}),(0,G.jsx)(`span`,{children:`More`})]})]})}function oUe({printDates:e,size:t=2,dateFrom:n,dateTo:r}){let i=(0,y.useMemo)(()=>n&&r?Math.max((new Date(r).getTime()-new Date(n).getTime())/864e5,0)+1:n?Math.max((Date.now()-new Date(n).getTime())/864e5,0)+1:1/0,[n,r]);return i<=7&&n&&r?(0,G.jsx)(aUe,{printDates:e,dateFrom:n,dateTo:r}):(0,G.jsx)(JHe,{printDates:e,months:i===1/0?t===1?3:t===2?6:12:Math.max(1,Math.ceil(i/30))})}function sUe({stats:e,archives:t,printerMap:n}){let{t:r}=U(),[i,a]=(0,y.useState)(`weight`),[o,s]=(0,y.useState)(`weight`),c=(0,y.useMemo)(()=>{let a=new Map;return e?.prints_by_printer&&Object.entries(e.prints_by_printer).forEach(([e,t])=>{let n=a.get(e)||{prints:0,weight:0,time:0};n.prints=t,a.set(e,n)}),t.forEach(t=>{if(!t.printer_id)return;let n=String(t.printer_id),r=a.get(n)||{prints:0,weight:0,time:0};r.weight+=t.filament_used_grams||0,r.time+=t.actual_time_seconds||t.print_time_seconds||0,e?.prints_by_printer||r.prints++,a.set(n,r)}),Array.from(a.entries()).map(([e,t])=>({name:n.get(e)||`${r(`common.printer`)} ${e}`,value:i===`prints`?t.prints:i===`weight`?Math.round(t.weight):Math.round(t.time/3600*10)/10})).sort((e,t)=>t.value-e.value)},[e,t,n,i,r]),l=(0,y.useMemo)(()=>{let e=Array.from({length:24},(e,t)=>({hour:t,label:v8[t],total:0,failures:0}));return t.forEach(t=>{if(!t.started_at)return;let n=ep(t.started_at);if(!n)return;let r=n.getHours();e[r].total++,t.status===`failed`&&e[r].failures++}),e},[t]),u=(0,y.useMemo)(()=>{let e=y8.map(e=>({name:e.key,count:0}));return t.forEach(t=>{let n=t.actual_time_seconds||t.print_time_seconds;if(!(!n||n<=0)){for(let t=0;t<y8.length;t++)if(n<=y8[t].max){e[t].count++;break}}}),e},[t]),d=(0,y.useMemo)(()=>{let e=[0,0,0,0,0,0,0],n=new Set;t.forEach(t=>{let r=ep(t.created_at)||new Date(t.created_at),i=r.getDay()-1;i<0&&(i=6),o===`prints`?e[i]++:o===`weight`?e[i]+=t.filament_used_grams||0:e[i]+=(t.actual_time_seconds||t.print_time_seconds||0)/3600;let a=new Date(r);a.setDate(r.getDate()-(r.getDay()+6)%7),n.add(`${a.getFullYear()}-${String(a.getMonth()+1).padStart(2,`0`)}-${String(a.getDate()).padStart(2,`0`)}`)});let r=Math.max(n.size,1);return tUe.map((t,n)=>({name:t,avg:Math.round(e[n]/r*10)/10}))},[t,o]),f=e=>({unit:e===`weight`?`g`:e===`time`?`h`:``,color:e===`weight`?`#00ae42`:e===`time`?`#3b82f6`:`#f59e0b`}),p=f(i),m=r(i===`weight`?`stats.filamentByWeight`:i===`time`?`stats.hours`:`common.prints`),h=f(o),g=r(o===`weight`?`stats.avgWeight`:o===`time`?`stats.avgTime`:`stats.avgPrints`);return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray`,children:r(`stats.printsByPrinter`)}),(0,G.jsx)(m8,{value:i,onChange:a})]}),c.length>0?(0,G.jsx)(lA,{width:`100%`,height:Math.max(140,c.length*40),children:(0,G.jsxs)(sU,{data:c,layout:`vertical`,margin:{left:10},children:[(0,G.jsx)(yV,{strokeDasharray:`3 3`,stroke:`#3d3d3d`}),(0,G.jsx)(CH,{type:`number`,stroke:`#9ca3af`,tick:{fontSize:11},unit:p.unit}),(0,G.jsx)(OH,{type:`category`,dataKey:`name`,stroke:`#9ca3af`,tick:{fontSize:11},width:100}),(0,G.jsx)(tz,{contentStyle:b8,formatter:e=>[i===`weight`?h8(Number(e??0)):`${e??0}${p.unit}`,m]}),(0,G.jsx)(hH,{dataKey:`value`,fill:p.color,radius:[0,4,4,0]})]})}):(0,G.jsx)(`p`,{className:`text-bambu-gray text-center py-4`,children:r(`stats.noPrinterData`)})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 lg:grid-cols-3 gap-4`,children:[(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray mb-3`,children:r(`stats.printDuration`)}),t.length>0?(0,G.jsx)(lA,{width:`100%`,height:160,children:(0,G.jsxs)(sU,{data:u,children:[(0,G.jsx)(yV,{strokeDasharray:`3 3`,stroke:`#3d3d3d`}),(0,G.jsx)(CH,{dataKey:`name`,stroke:`#9ca3af`,tick:{fontSize:11}}),(0,G.jsx)(OH,{stroke:`#9ca3af`,tick:{fontSize:11},allowDecimals:!1}),(0,G.jsx)(tz,{contentStyle:b8}),(0,G.jsx)(hH,{dataKey:`count`,name:r(`common.prints`),fill:`#00ae42`,radius:[4,4,0,0]})]})}):(0,G.jsx)(`p`,{className:`text-bambu-gray text-center py-4`,children:r(`stats.noArchiveData`)})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray`,children:r(`stats.printHabits`)}),(0,G.jsx)(m8,{value:o,onChange:s})]}),t.length>0?(0,G.jsx)(lA,{width:`100%`,height:160,children:(0,G.jsxs)(sU,{data:d,children:[(0,G.jsx)(yV,{strokeDasharray:`3 3`,stroke:`#3d3d3d`}),(0,G.jsx)(CH,{dataKey:`name`,stroke:`#9ca3af`,tick:{fontSize:11}}),(0,G.jsx)(OH,{stroke:`#9ca3af`,tick:{fontSize:11},unit:h.unit}),(0,G.jsx)(tz,{contentStyle:b8,formatter:e=>[`${e??0}${h.unit}`,g]}),(0,G.jsx)(hH,{dataKey:`avg`,fill:h.color,radius:[4,4,0,0]})]})}):(0,G.jsx)(`p`,{className:`text-bambu-gray text-center py-4`,children:r(`stats.noArchiveData`)})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray mb-3`,children:r(`stats.printTimeOfDay`)}),t.length>0?(0,G.jsx)(lA,{width:`100%`,height:160,children:(0,G.jsxs)(sU,{data:l,children:[(0,G.jsx)(yV,{strokeDasharray:`3 3`,stroke:`#3d3d3d`}),(0,G.jsx)(CH,{dataKey:`label`,stroke:`#9ca3af`,tick:{fontSize:10},interval:5}),(0,G.jsx)(OH,{stroke:`#9ca3af`,tick:{fontSize:11},allowDecimals:!1}),(0,G.jsx)(tz,{contentStyle:b8}),(0,G.jsx)(hH,{dataKey:`total`,name:r(`stats.totalPrints`),fill:`#00ae42`,radius:[2,2,0,0]}),(0,G.jsx)(hH,{dataKey:`failures`,name:r(`stats.failed`),fill:`#ef4444`,radius:[2,2,0,0]})]})}):(0,G.jsx)(`p`,{className:`text-bambu-gray text-center py-4`,children:r(`stats.noArchiveData`)})]})]})]})}function cUe({archives:e,currency:t,dateFrom:n,dateTo:r}){let{t:i}=U();return!e||e.length===0?(0,G.jsx)(`p`,{className:`text-bambu-gray text-center py-4`,children:i(`stats.noPrintData`)}):(0,G.jsx)(XHe,{archives:e,currency:t,dateFrom:n,dateTo:r})}function lUe({size:e=1,dateFrom:t,dateTo:n,createdById:r}){let{t:i}=U(),a=!!(t||n),{data:o,isLoading:s}=K({queryKey:[`failureAnalysis`,t,n,r??`all`],queryFn:()=>Z.getFailureAnalysis({...a?{dateFrom:t,dateTo:n}:{days:30},createdById:r})});if(s)return(0,G.jsx)(`div`,{className:`flex justify-center py-4`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})});if(!o||o.total_prints===0)return(0,G.jsx)(`p`,{className:`text-bambu-gray text-center py-4`,children:i(a?`stats.noPrintDataInRange`:`stats.noPrintDataLast30Days`)});let c=e===1?5:e===2?8:999,l=Object.entries(o.failures_by_reason).sort(([,e],[,t])=>t-e),u=l.slice(0,c),d=l.length>c;return(0,G.jsxs)(`div`,{className:`${e>=2?`flex gap-8`:`space-y-4`}`,children:[(0,G.jsxs)(`div`,{className:e>=2?`flex-shrink-0`:``,children:[(0,G.jsx)(`div`,{className:`flex items-center gap-4`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Iu,{className:`w-5 h-5 ${o.failure_rate>20?`text-status-error`:o.failure_rate>10?`text-status-warning`:`text-status-ok`}`}),(0,G.jsxs)(`span`,{className:`font-bold text-white ${e>=2?`text-3xl`:`text-2xl`}`,children:[o.failure_rate.toFixed(1),`%`]})]})}),(0,G.jsx)(`div`,{className:`text-sm text-bambu-gray mt-1`,children:i(`stats.failedPrintsCount`,{failed:o.failed_prints,total:o.total_prints})}),o.trend&&o.trend.length>=2&&(0,G.jsx)(`div`,{className:`${e>=2?`mt-4`:`mt-2 pt-2 border-t border-bambu-dark-tertiary`}`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(Pu,{className:`w-4 h-4 ${o.trend[o.trend.length-1].failure_rate<o.trend[o.trend.length-2].failure_rate?`text-status-ok`:`text-status-error`}`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`stats.lastWeekRate`,{rate:o.trend[o.trend.length-1].failure_rate.toFixed(1)})})]})})]}),u.length>0&&(0,G.jsxs)(`div`,{className:`flex-1 ${e>=2?`border-l border-bambu-dark-tertiary pl-8`:`pt-2`}`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray font-medium mb-2`,children:i(e>=2?`stats.failureReasons`:`stats.topFailureReasons`)}),(0,G.jsx)(`div`,{className:`${e===4?`grid grid-cols-2 gap-x-6 gap-y-1`:`space-y-1`}`,children:u.map(([t,n])=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-sm`,children:[(0,G.jsx)(`span`,{className:`text-white truncate ${e===4?`max-w-[200px]`:`max-w-[160px]`}`,children:t?i(`editArchive.failureReasons.${t}`,{defaultValue:t}):i(`common.unknown`)}),(0,G.jsx)(`span`,{className:`text-bambu-gray ml-2`,children:n})]},t))}),d&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-2`,children:i(`common.more`,{count:l.length-c})})]})]})}function uUe({archives:e,currency:t}){let{t:n}=U(),r=(0,y.useMemo)(()=>{let r=[];if(e.length===0)return r;let i=t=>{let n=null,r=0;return e.forEach(e=>{let i=t(e);i&&i>r&&(r=i,n=e)}),{archive:n,value:r}},a=i(e=>e.status===`completed`?e.actual_time_seconds:null);a.archive&&r.push({icon:js,iconColor:`text-blue-600 dark:text-blue-400`,label:n(`stats.longestPrint`),value:op(a.value),detail:a.archive.print_name||null});let o=i(e=>e.filament_used_grams);o.archive&&r.push({icon:Sl,iconColor:`text-orange-600 dark:text-orange-400`,label:n(`stats.heaviestPrint`),value:h8(o.value),detail:o.archive.print_name||null});let s=i(e=>(e.cost??0)+(e.energy_cost??0));s.archive&&r.push({icon:Ks,iconColor:`text-green-600 dark:text-green-400`,label:n(`stats.mostExpensivePrint`),value:`${t}${s.value.toFixed(2)}`,detail:s.archive.print_name||null});let c=new Map;e.forEach(e=>{let t=ep(e.created_at)||new Date(e.created_at),n=`${t.getFullYear()}-${String(t.getMonth()+1).padStart(2,`0`)}-${String(t.getDate()).padStart(2,`0`)}`;c.set(n,(c.get(n)||0)+1)});let l=``,u=0;c.forEach((e,t)=>{e>u&&(u=e,l=t)}),u>1&&r.push({icon:as,iconColor:`text-purple-600 dark:text-purple-400`,label:n(`stats.busiestDay`),value:`${u} ${n(`common.prints`)}`,detail:(()=>{let[e,t,n]=l.split(`-`).map(Number);return new Date(e,t-1,n).toLocaleDateString(void 0,{month:`short`,day:`numeric`,year:`numeric`})})()});let d=[...e].filter(e=>e.status===`completed`||e.status===`failed`).sort((e,t)=>new Date(t.completed_at||t.created_at).getTime()-new Date(e.completed_at||e.created_at).getTime()),f=0;for(let e of d)if(e.status===`completed`)f++;else break;return f>0&&r.push({icon:rd,iconColor:`text-yellow-600 dark:text-yellow-400`,label:n(`stats.successStreak`),value:`${f}`,detail:f===1?n(`stats.streakPrint`):n(`stats.streakPrints`,{count:f})}),r},[e,t,n]);return r.length===0?(0,G.jsx)(`p`,{className:`text-bambu-gray text-center py-4`,children:n(`stats.noArchiveData`)}):(0,G.jsx)(`div`,{className:`space-y-3`,children:r.map((e,t)=>(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-1.5 rounded-lg bg-bambu-dark ${e.iconColor}`,children:(0,G.jsx)(e.icon,{className:`w-4 h-4`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:e.label}),(0,G.jsxs)(`div`,{className:`flex items-baseline gap-2`,children:[(0,G.jsx)(`span`,{className:`text-sm font-bold text-white`,children:e.value}),e.detail&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray truncate`,children:e.detail})]})]})]},t))})}function dUe(){let{t:e}=U(),{showToast:t}=Gd(),{hasPermission:n,authEnabled:r}=jd(),[i,a]=(0,y.useState)(!1),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(0),[u,d]=(0,y.useState)(0),[f,p]=(0,y.useState)(!1),[m,h]=(0,y.useState)(null),[g,_]=(0,y.useState)(!1),v=r&&n(`stats:filter_by_user`),[b,x]=(0,y.useState)(()=>{try{let e=localStorage.getItem(`bambusy-stats-timeframe`);if(e){let t=JSON.parse(e);if(t.preset)return t}}catch{}return{preset:`all-time`,dateFrom:void 0,dateTo:void 0}}),[S,C]=(0,y.useState)(!1);(0,y.useEffect)(()=>{localStorage.setItem(`bambusy-stats-timeframe`,JSON.stringify(b))},[b]);let w=(0,y.useMemo)(()=>b.preset===`custom`?{dateFrom:b.dateFrom,dateTo:b.dateTo}:$He(b.preset),[b]);(0,y.useEffect)(()=>{let e=()=>{try{let e=localStorage.getItem(`bambusy-dashboard-layout-v2`);e&&d(JSON.parse(e).hidden?.length||0)}catch{d(0)}};e(),window.addEventListener(`storage`,e);let t=setInterval(e,2e3);return()=>{window.removeEventListener(`storage`,e),clearInterval(t)}},[c]);let T=m===null?void 0:m,{data:E,isLoading:D,isFetching:O,refetch:k}=K({queryKey:[`archiveStats`,w.dateFrom,w.dateTo,T??`all`],queryFn:()=>Z.getArchiveStats({dateFrom:w.dateFrom,dateTo:w.dateTo,createdById:T})}),{data:A}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:j,isFetching:M,refetch:N}=K({queryKey:[`archivesSlim`,w.dateFrom,w.dateTo,T??`all`],queryFn:()=>Z.getArchivesSlim(w.dateFrom,w.dateTo,T)}),{data:P}=K({queryKey:[`settings`],queryFn:Z.getSettings}),{data:F}=K({queryKey:[`users`,`slim`],queryFn:Z.getUsersSlim,enabled:v}),I=(0,y.useMemo)(()=>m===null?e(`stats.allUsers`,`All Users`):m===-1?e(`stats.noUser`,`No User (System)`):F?.find(e=>e.id===m)?.username??`?`,[m,F,e]),L=async n=>{s(!1),a(!0);try{let{blob:r,filename:i}=await Z.exportStats({format:n,days:90,createdById:T}),a=URL.createObjectURL(r),o=document.createElement(`a`);o.href=a,o.download=i,o.click(),URL.revokeObjectURL(a),t(e(`stats.exportDownloaded`))}catch{t(e(`stats.exportFailed`),`error`)}finally{a(!1)}},R=async()=>{p(!0);try{let n=await Z.recalculateCosts();await Promise.all([k(),N()]),t(e(`stats.recalculatedCosts`,{count:n.updated}))}catch{t(e(`stats.recalculateFailed`),`error`)}finally{p(!1)}},z=(O||M)&&!D,B=Pf(P?.currency||`USD`),V=(0,y.useMemo)(()=>new Map([...Object.entries(E?.printer_names||{}),...A?.map(e=>[String(e.id),e.name])||[]]),[E?.printer_names,A]),ee=(0,y.useMemo)(()=>j?.map(e=>e.created_at)||[],[j]);if(D)return(0,G.jsx)(`div`,{className:`p-4 md:p-8`,children:(0,G.jsx)(`div`,{className:`text-center py-12 text-bambu-gray`,children:e(`stats.loadingStats`)})});let te=[{id:`quick-stats`,title:e(`stats.quickStats`),component:(0,G.jsx)(nUe,{stats:E,currency:B}),defaultSize:2},{id:`success-rate`,title:e(`stats.successRate`),component:e=>(0,G.jsx)(rUe,{stats:E,printerMap:V,size:e}),defaultSize:1},{id:`time-accuracy`,title:e(`stats.timeAccuracy`),component:e=>(0,G.jsx)(iUe,{stats:E,printerMap:V,size:e}),defaultSize:1},{id:`failure-analysis`,title:e(`stats.failureAnalysis`),component:e=>(0,G.jsx)(lUe,{size:e,dateFrom:w.dateFrom,dateTo:w.dateTo,createdById:T}),defaultSize:1},{id:`print-activity`,title:e(`stats.printActivity`),component:e=>(0,G.jsx)(oUe,{printDates:ee,size:e,dateFrom:w.dateFrom,dateTo:w.dateTo}),defaultSize:2},{id:`records`,title:e(`stats.records`),component:(0,G.jsx)(uUe,{archives:j||[],currency:B}),defaultSize:1},{id:`printer-stats`,title:e(`stats.printerStats`),component:(0,G.jsx)(sUe,{stats:E,archives:j||[],printerMap:V}),defaultSize:4},{id:`filament-trends`,title:e(`stats.filamentTrends`),component:(0,G.jsx)(cUe,{archives:j||[],currency:B,dateFrom:w.dateFrom,dateTo:w.dateTo}),defaultSize:4}];return(0,G.jsxs)(`div`,{className:`p-4 md:p-8`,children:[(0,G.jsxs)(`div`,{className:`flex flex-col sm:flex-row sm:items-center sm:justify-between gap-4 mb-6`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(cs,{className:`w-7 h-7 text-bambu-green`}),e(`stats.title`)]}),z&&(0,G.jsx)(Y,{className:`w-5 h-5 text-bambu-green animate-spin`})]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:e(`stats.subtitle`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-wrap`,children:[u>0&&(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>{window.dispatchEvent(new CustomEvent(`toggle-hidden-panel`))},children:[(0,G.jsx)(ic,{className:`w-4 h-4`}),e(`stats.hiddenCount`,{count:u})]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>{localStorage.removeItem(`bambusy-dashboard-layout-v2`),l(e=>e+1),t(e(`stats.layoutReset`))},disabled:!n(`settings:update`),title:n(`settings:update`)?void 0:e(`stats.noPermissionResetLayout`),children:[(0,G.jsx)(Ul,{className:`w-4 h-4`}),e(`stats.resetLayout`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:R,disabled:f||!n(`archives:update_all`),title:n(`archives:update_all`)?e(`stats.recalculateCostsHint`):e(`stats.noPermissionRecalculate`),children:[f?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(ns,{className:`w-4 h-4`}),e(`stats.recalculateCosts`)]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>s(!o),disabled:i,children:[i?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(uc,{className:`w-4 h-4`}),e(`stats.exportStats`)]}),o&&(0,G.jsxs)(`div`,{className:`absolute right-0 top-full mt-1 w-48 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl z-20`,children:[(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-white hover:bg-bambu-dark-tertiary transition-colors flex items-center gap-2 rounded-t-lg`,onClick:()=>L(`csv`),children:[(0,G.jsx)(dc,{className:`w-4 h-4`}),e(`stats.exportAsCsv`)]}),(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-white hover:bg-bambu-dark-tertiary transition-colors flex items-center gap-2 rounded-b-lg`,onClick:()=>L(`xlsx`),children:[(0,G.jsx)(uc,{className:`w-4 h-4`}),e(`stats.exportAsExcel`)]})]})]}),v&&F&&F.length>0&&(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>_(!g),children:[(0,G.jsx)(Hu,{className:`w-4 h-4`}),I,(0,G.jsx)(ps,{className:`w-3 h-3`})]}),g&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-10`,onClick:()=>_(!1)}),(0,G.jsxs)(`div`,{className:`absolute right-0 top-full mt-1 w-48 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl z-20 p-2 max-h-64 overflow-y-auto`,children:[(0,G.jsx)(`button`,{className:`w-full px-3 py-2 text-left text-sm rounded-md transition-colors ${m===null?`bg-bambu-green text-white`:`text-white hover:bg-bambu-dark-tertiary`}`,onClick:()=>{h(null),_(!1)},children:e(`stats.allUsers`,`All Users`)}),(0,G.jsx)(`button`,{className:`w-full px-3 py-2 text-left text-sm rounded-md transition-colors ${m===-1?`bg-bambu-green text-white`:`text-white hover:bg-bambu-dark-tertiary`}`,onClick:()=>{h(-1),_(!1)},children:e(`stats.noUser`,`No User (System)`)}),(0,G.jsx)(`div`,{className:`border-t border-bambu-dark-tertiary my-1`}),F.map(e=>(0,G.jsx)(`button`,{className:`w-full px-3 py-2 text-left text-sm rounded-md transition-colors ${m===e.id?`bg-bambu-green text-white`:`text-white hover:bg-bambu-dark-tertiary`}`,onClick:()=>{h(e.id),_(!1)},children:e.username},e.id))]})]})]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>C(!S),children:[(0,G.jsx)(as,{className:`w-4 h-4`}),e(`stats.timeframe.${b.preset}`),(0,G.jsx)(ps,{className:`w-3 h-3`})]}),S&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-10`,onClick:()=>C(!1)}),(0,G.jsxs)(`div`,{className:`absolute right-0 top-full mt-1 w-64 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl z-20 p-2`,children:[eUe.map(t=>(0,G.jsx)(`button`,{className:`w-full px-3 py-2 text-left text-sm rounded-md transition-colors ${b.preset===t?`bg-bambu-green text-white`:`text-white hover:bg-bambu-dark-tertiary`}`,onClick:()=>{x({preset:t,dateFrom:void 0,dateTo:void 0}),C(!1)},children:e(`stats.timeframe.${t}`)},t)),(0,G.jsx)(`div`,{className:`border-t border-bambu-dark-tertiary my-2`}),(0,G.jsx)(`button`,{className:`w-full px-3 py-2 text-left text-sm rounded-md transition-colors ${b.preset===`custom`?`bg-bambu-green text-white`:`text-white hover:bg-bambu-dark-tertiary`}`,onClick:()=>x(e=>({...e,preset:`custom`})),children:e(`stats.timeframe.custom`)}),b.preset===`custom`&&(0,G.jsxs)(`div`,{className:`mt-2 px-1 pb-1 space-y-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray block mb-1`,children:e(`stats.timeframe.from`)}),(0,G.jsx)(`input`,{type:`date`,value:b.dateFrom||``,max:b.dateTo||new Date().toISOString().split(`T`)[0],onChange:e=>x(t=>({...t,dateFrom:e.target.value||void 0})),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded-md px-3 py-1.5 text-sm text-white`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray block mb-1`,children:e(`stats.timeframe.to`)}),(0,G.jsx)(`input`,{type:`date`,value:b.dateTo||``,min:b.dateFrom,max:new Date().toISOString().split(`T`)[0],onChange:e=>x(t=>({...t,dateTo:e.target.value||void 0})),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded-md px-3 py-1.5 text-sm text-white`})]}),(0,G.jsx)(Q,{variant:`primary`,onClick:()=>C(!1),className:`w-full`,children:e(`common.apply`)})]})]})]})]})]})]}),(0,G.jsx)(QHe,{widgets:te,storageKey:`bambusy-dashboard-layout-v2`,stackBelow:640,hideControls:!0},c)]})}function x8(e){return e.length<8?`tooShort`:/[A-Z]/.test(e)?/[a-z]/.test(e)?/\d/.test(e)?/[^A-Za-z0-9]/.test(e)?null:`needsSpecial`:`needsDigit`:`needsLowercase`:`needsUppercase`}var S8=[`inventory-locations`];function C8(e){return e.invalidateQueries({queryKey:S8})}function w8(e,t){return Promise.all([e.invalidateQueries({queryKey:[...t]}),C8(e)])}var T8=`bambuddy-location-sensor-show-on-card-defaults`,E8={alertAbove:``,alertBelow:``,notifyOnAlert:!1,showOnCard:!0};function fUe(){return{temperature:{...E8,alertAbove:`30`,alertBelow:`20`},humidity:{...E8,alertAbove:`30`,alertBelow:`10`},battery:{...E8,alertBelow:`10`}}}function pUe(){try{let e=localStorage.getItem(T8);return e?JSON.parse(e):{}}catch{return{}}}function D8(e){let t=fUe();if(e)try{let n=JSON.parse(e);Object.keys(t).forEach(e=>{let r=n[e];r&&(typeof r.alertAbove==`string`&&(t[e].alertAbove=r.alertAbove),typeof r.alertBelow==`string`&&(t[e].alertBelow=r.alertBelow),typeof r.notifyOnAlert==`boolean`&&(t[e].notifyOnAlert=r.notifyOnAlert))})}catch{}let n=pUe();return Object.keys(t).forEach(e=>{typeof n[e]==`boolean`&&(t[e].showOnCard=n[e])}),t}function mUe(e){let t={};return Object.keys(e).forEach(n=>{t[n]={alertAbove:e[n].alertAbove,alertBelow:e[n].alertBelow,notifyOnAlert:e[n].notifyOnAlert}}),JSON.stringify(t)}function hUe(e){try{let t={};Object.keys(e).forEach(n=>{t[n]=e[n].showOnCard}),localStorage.setItem(T8,JSON.stringify(t))}catch{return}}var O8=`bambuddy-location-sensor-colorize-values`;function k8(){try{let e=localStorage.getItem(O8);return e?e===`true`:!0}catch{return!0}}var A8=`bambuddy:location-sensor-color-prefs-changed`;function j8(){window.dispatchEvent(new Event(A8))}function gUe(e){try{localStorage.setItem(O8,String(e))}catch{return}j8()}var M8=[`red`,`orange`,`yellow`,`green`,`blue`,`purple`,`pink`],N8={red:`text-red-400`,orange:`text-orange-400`,yellow:`text-yellow-400`,green:`text-green-400`,blue:`text-blue-400`,purple:`text-purple-400`,pink:`text-pink-400`},P8=`bambuddy-location-sensor-alert-above-color`,F8=`bambuddy-location-sensor-alert-below-color`,I8=`bambuddy-location-sensor-alert-optimal-color`;function L8(e){return!!e&&M8.includes(e)}function R8(){try{let e=localStorage.getItem(P8);return L8(e)?e:`purple`}catch{return`purple`}}function _Ue(e){try{localStorage.setItem(P8,e)}catch{return}j8()}function vUe(){try{let e=localStorage.getItem(F8);return L8(e)?e:`red`}catch{return`red`}}function yUe(e){try{localStorage.setItem(F8,e)}catch{return}j8()}function bUe(){try{let e=localStorage.getItem(I8);return L8(e)?e:`green`}catch{return`green`}}function xUe(e){try{localStorage.setItem(I8,e)}catch{return}j8()}function SUe(){return{colorize:k8(),aboveColor:R8(),belowColor:vUe(),optimalColor:bUe()}}function CUe(){let[e,t]=(0,y.useState)(SUe);return(0,y.useEffect)(()=>{let e=()=>t(SUe());return window.addEventListener(A8,e),()=>window.removeEventListener(A8,e)},[]),e}function wUe(e){return!e.reachable||e.state===null?null:e.kind===`numeric`?e.alert_above===null&&e.alert_below===null||e.value===null?null:e.alert_above!==null&&e.value>e.alert_above?`above`:e.alert_below!==null&&e.value<e.alert_below?`below`:`ok`:e.alert_state===null?null:e.state.toLowerCase()===e.alert_state?`above`:`ok`}function TUe(e,t,n,r){return e===`above`?N8[t]:e===`below`?N8[n]:e===`ok`?N8[r]:``}var z8={PLA:0,PETG:0,"PETG-CF":40,ABS:45,ASA:45,PA:50,"PA-CF":55,PC:50,"PC-FR":50,TPU:0,PVA:0,default:0},EUe=[`PA-CF`,`PA`,`PC`,`PC-FR`,`ABS`,`ASA`,`PETG-CF`,`PETG`,`PLA`,`TPU`,`PVA`,`default`];function DUe(e){if(!e)return{...z8};try{let t=JSON.parse(e);if(t&&typeof t==`object`&&!Array.isArray(t)){let e={};for(let[n,r]of Object.entries(t)){let t=typeof r==`number`?r:Number(r);Number.isFinite(t)&&(e[n]=Math.max(0,Math.min(65,Math.round(t))))}return e.default===void 0&&(e.default=z8.default),e}}catch{}return{...z8}}function OUe(e){let t={};for(let n of EUe)e[n]!==void 0&&(t[n]=e[n]);for(let[n,r]of Object.entries(e))n in t||(t[n]=r);return JSON.stringify(t)}function kUe({value:e,onChange:t,disabled:n=!1}){let{t:r}=U(),i=DUe(e),a=(e,n)=>{let r=Math.max(0,Math.min(65,Math.round(n)));t(OUe({...i,[e]:r}))};return(0,G.jsx)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 gap-x-3 gap-y-1.5`,children:EUe.map(e=>{let t=i[e]??z8[e]??0,o=e==="default"?r(`settings.preheatFilamentTargetsDefaultRow`,`Other / unmapped`):e;return(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2`,children:[(0,G.jsx)(`span`,{className:`text-xs ${e==="default"?`text-bambu-gray italic`:`text-bambu-gray`}`,children:o}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`input`,{type:`number`,min:0,max:65,step:1,value:t,onChange:t=>a(e,parseInt(t.target.value,10)||0),disabled:n,className:`w-16 px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-xs text-right focus:outline-none focus:border-bambu-green disabled:opacity-50`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`°C`})]})]},e)})})}function B8(e,t,n){if(!e)return null;let r=(e[n.source]?.[t]??[]).find(e=>e.id===n.id);return r?r.name:null}var AUe={orca_cloud:`Orca Cloud`,cloud:`Bambu Cloud`,local:`Imported`,standard:`Standard`};function jUe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),{data:r,isLoading:i,error:a}=K({queryKey:[`slicer-pipelines`],queryFn:()=>Z.listSlicerPipelines()}),{data:o}=K({queryKey:[`slicer-presets`],queryFn:()=>Z.getSlicerPresets()}),{data:s}=K({queryKey:[`printers`],queryFn:()=>Z.getPrinters()}),c=q({mutationFn:({id:e,name:t,description:n,target_printer_id:r,target_kind:i,target_model_class:a,fanout_strategy:o})=>Z.updateSlicerPipeline(e,{name:t,description:n,target_printer_id:r,target_kind:i,target_model_class:a,fanout_strategy:o}),onSuccess:()=>{t.invalidateQueries({queryKey:[`slicer-pipelines`]}),n(e(`settings.pipelines.toast.saved`,`Pipeline saved`),`success`)},onError:t=>{n(t.message||e(`settings.pipelines.toast.saveFailed`,`Save failed`),`error`)}}),l=q({mutationFn:e=>Z.deleteSlicerPipeline(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`slicer-pipelines`]}),n(e(`settings.pipelines.toast.deleted`,`Pipeline deleted`),`success`)},onError:t=>{n(t.message||e(`settings.pipelines.toast.deleteFailed`,`Delete failed`),`error`)}}),[u,d]=(0,y.useState)(``),[f,p]=(0,y.useState)(``),m=(0,y.useMemo)(()=>r?.pipelines??[],[r?.pipelines]),h=(0,y.useMemo)(()=>{let e=new Set,t=new Set,n=!1;for(let r of m)r.target_kind===`printer_class`&&r.target_model_class?t.add(r.target_model_class):r.target_printer_id?e.add(r.target_printer_id):n=!0;return{printers:(s??[]).filter(t=>e.has(t.id)),classes:Array.from(t).sort(),anyWithoutTarget:n}},[m,s]),g=(0,y.useMemo)(()=>{let e=u.trim().toLowerCase();return m.filter(t=>{if(e&&!t.name.toLowerCase().includes(e))return!1;if(f===`none`){if(t.target_kind===`printer_class`?t.target_model_class:t.target_printer_id!==null)return!1}else if(f.startsWith(`p:`)){let e=parseInt(f.slice(2),10);if(t.target_kind===`printer_class`||t.target_printer_id!==e)return!1}else if(f.startsWith(`c:`)){let e=f.slice(2);if(t.target_kind!==`printer_class`||t.target_model_class!==e)return!1}return!0})},[m,u,f]);return(0,G.jsxs)(Ld,{children:[(0,G.jsxs)(Rd,{children:[(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)($u,{className:`w-4 h-4 text-bambu-green`}),e(`settings.pipelines.title`,`Slicer Pipelines`)]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`settings.pipelines.subtitle`,`Reusable preset bundles (printer + process + filaments + bed type). Save one from the Slice dialog and apply it with a single click on the next file.`)})]}),(0,G.jsxs)(zd,{children:[i&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),e(`settings.pipelines.loading`,`Loading pipelines…`)]}),a&&(0,G.jsx)(`div`,{className:`text-sm text-red-700 dark:text-red-400`,children:e(`settings.pipelines.loadError`,`Could not load pipelines.`)}),!i&&!a&&m.length>0&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 mb-3`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1 min-w-[12rem]`,children:[(0,G.jsx)(Zl,{className:`absolute left-2 top-1/2 -translate-y-1/2 w-3.5 h-3.5 text-bambu-gray pointer-events-none`}),(0,G.jsx)(`input`,{type:`search`,value:u,onChange:e=>d(e.target.value),placeholder:e(`settings.pipelines.searchPlaceholder`,`Search pipelines…`),"aria-label":e(`settings.pipelines.searchPlaceholder`,`Search pipelines…`),className:`w-full pl-7 pr-2 py-1 text-xs bg-bambu-dark border border-bambu-dark-tertiary rounded text-white`})]}),(0,G.jsxs)(`select`,{value:f,onChange:e=>p(e.target.value),"aria-label":e(`settings.pipelines.filterTarget`,`Filter by target`),className:`text-xs px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white`,children:[(0,G.jsx)(`option`,{value:``,children:e(`settings.pipelines.filter.all`,`All targets`)}),h.printers.length>0&&(0,G.jsx)(`optgroup`,{label:e(`settings.pipelines.field.targetKindSpecific`,`Specific printer`),children:h.printers.map(e=>(0,G.jsx)(`option`,{value:`p:${e.id}`,children:e.name},`p-${e.id}`))}),h.classes.length>0&&(0,G.jsx)(`optgroup`,{label:e(`settings.pipelines.field.targetKindClass`,`Printer class`),children:h.classes.map(t=>(0,G.jsx)(`option`,{value:`c:${t}`,children:e(`library.runWithPipeline.classTarget`,`Any {{model}}`,{model:t})},`c-${t}`))}),h.anyWithoutTarget&&(0,G.jsx)(`option`,{value:`none`,children:e(`settings.pipelines.filter.noTarget`,`No target set`)})]}),(u||f)&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:e(`settings.pipelines.filter.count`,`{{shown}} / {{total}}`,{shown:g.length,total:m.length})})]}),!i&&!a&&m.length===0&&(0,G.jsxs)(`div`,{className:`text-sm text-bambu-gray space-y-2`,children:[(0,G.jsx)(`p`,{children:e(`settings.pipelines.empty.title`,`No pipelines yet.`)}),(0,G.jsx)(`p`,{children:e(`settings.pipelines.empty.howto`,`Open the Slice dialog for any file, pick your printer / process / filaments / bed type, then click "Save as pipeline". Your saved pipelines will appear here.`)})]}),!i&&!a&&m.length>0&&g.length===0&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`settings.pipelines.filter.noMatches`,`No pipelines match the current filters.`)}),!i&&!a&&g.length>0&&(0,G.jsx)(`div`,{className:`space-y-2`,children:g.map(t=>(0,G.jsx)(MUe,{pipeline:t,presets:o,printers:s??[],onSave:e=>c.mutate({id:t.id,...e}),onDelete:()=>{confirm(e(`settings.pipelines.confirmDelete`,`Delete this pipeline? This cannot be undone.`))&&l.mutate(t.id)},saving:c.isPending,deleting:l.isPending},t.id))})]})]})}function MUe({pipeline:e,presets:t,printers:n,onSave:r,onDelete:i,saving:a,deleting:o}){let{t:s}=U(),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(e.name),[f,p]=(0,y.useState)(e.description??``),[m,h]=(0,y.useState)(e.target_printer_id),[g,_]=(0,y.useState)(e.target_kind===`printer_class`?`printer_class`:`specific_printer`),[v,b]=(0,y.useState)(e.target_model_class??``),[x,S]=(0,y.useState)(e.fanout_strategy??`max_parallel`),C=Array.from(new Set(n.map(e=>e.model).filter(e=>!!e))).sort(),{data:w}=K({queryKey:[`pipeline-runs`,e.id],queryFn:()=>Z.listPipelineRuns(e.id,1),enabled:!c,refetchInterval:15e3}),T=w?.runs?.[0],E=B8(t,`printer`,e.printer_preset),D=B8(t,`process`,e.process_preset),O=e.filament_presets.map(e=>B8(t,`filament`,e)),k=e.filament_presets.length>1&&e.filament_presets.every(t=>t.source===e.filament_presets[0].source&&t.id===e.filament_presets[0].id),A=t!==void 0&&(E===null||D===null||O.some(e=>e===null)),j=e.target_printer_id?n.find(t=>t.id===e.target_printer_id):void 0,M=e.target_kind===`printer_class`,N=M?!e.target_model_class:e.target_printer_id===null;return(0,G.jsxs)(`div`,{className:`rounded-md border border-bambu-dark-tertiary bg-bambu-dark/40 px-3 py-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-3`,children:[(0,G.jsx)(`div`,{className:`min-w-0 flex-1`,children:c?(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`input`,{value:u,onChange:e=>d(e.target.value),"aria-label":s(`settings.pipelines.field.name`,`Pipeline name`),placeholder:s(`settings.pipelines.field.name`,`Pipeline name`),className:`w-full px-2 py-1 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded text-white`}),(0,G.jsx)(`textarea`,{value:f,onChange:e=>p(e.target.value),"aria-label":s(`settings.pipelines.field.description`,`Description`),placeholder:s(`settings.pipelines.field.description`,`Description`),rows:2,className:`w-full px-2 py-1 text-xs bg-bambu-dark border border-bambu-dark-tertiary rounded text-white`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray block mb-1`,children:s(`settings.pipelines.field.targetKind`,`Target type`)}),(0,G.jsxs)(`div`,{className:`flex gap-3 text-xs`,children:[(0,G.jsxs)(`label`,{className:`flex items-center gap-1 text-white`,children:[(0,G.jsx)(`input`,{type:`radio`,name:`target-kind-${e.id}`,value:`specific_printer`,checked:g===`specific_printer`,onChange:()=>_(`specific_printer`),"aria-label":s(`settings.pipelines.field.targetKindSpecific`,`Specific printer`)}),s(`settings.pipelines.field.targetKindSpecific`,`Specific printer`)]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-1 text-white`,children:[(0,G.jsx)(`input`,{type:`radio`,name:`target-kind-${e.id}`,value:`printer_class`,checked:g===`printer_class`,onChange:()=>_(`printer_class`),"aria-label":s(`settings.pipelines.field.targetKindClass`,`Printer class`)}),s(`settings.pipelines.field.targetKindClass`,`Printer class`)]})]})]}),g===`specific_printer`?(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray block mb-1`,children:s(`settings.pipelines.field.targetPrinter`,`Target printer`)}),(0,G.jsxs)(`select`,{value:m??``,onChange:e=>h(e.target.value?parseInt(e.target.value,10):null),"aria-label":s(`settings.pipelines.field.targetPrinter`,`Target printer`),className:`w-full px-2 py-1 text-xs bg-bambu-dark border border-bambu-dark-tertiary rounded text-white`,children:[(0,G.jsx)(`option`,{value:``,children:s(`settings.pipelines.field.noTarget`,`— No target —`)}),n.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]}):(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray block mb-1`,children:s(`settings.pipelines.field.targetModelClass`,`Printer model`)}),(0,G.jsxs)(`select`,{value:v,onChange:e=>b(e.target.value),"aria-label":s(`settings.pipelines.field.targetModelClass`,`Printer model`),className:`w-full px-2 py-1 text-xs bg-bambu-dark border border-bambu-dark-tertiary rounded text-white`,children:[(0,G.jsx)(`option`,{value:``,children:s(`settings.pipelines.field.noTarget`,`— No target —`)}),C.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray block mb-1`,children:s(`settings.pipelines.field.fanoutStrategy`,`Fanout strategy`)}),(0,G.jsxs)(`select`,{value:x,onChange:e=>S(e.target.value),"aria-label":s(`settings.pipelines.field.fanoutStrategy`,`Fanout strategy`),className:`w-full px-2 py-1 text-xs bg-bambu-dark border border-bambu-dark-tertiary rounded text-white`,children:[(0,G.jsx)(`option`,{value:`max_parallel`,children:s(`settings.pipelines.field.fanout.max_parallel`,`Max parallel — distribute across any idle matching printer`)}),(0,G.jsx)(`option`,{value:`round_robin`,children:s(`settings.pipelines.field.fanout.round_robin`,`Round robin — cycle through eligible printers`)}),(0,G.jsx)(`option`,{value:`fill_one_first`,children:s(`settings.pipelines.field.fanout.fill_one_first`,`Fill one first — pin all copies to one printer`)})]})]})]})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-baseline gap-x-2 gap-y-1`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-white truncate`,children:e.name}),(0,G.jsxs)(`span`,{className:`text-xs px-1.5 py-0.5 rounded inline-flex items-center gap-1 ${N?`bg-amber-100 dark:bg-amber-500/15 text-amber-700 dark:text-amber-400`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:[(0,G.jsx)(Ll,{className:`w-3 h-3`}),N?s(`settings.pipelines.noTargetHint`,`Set a target printer to run this`):M?(0,G.jsxs)(G.Fragment,{children:[s(`library.runWithPipeline.classTarget`,`Any {{model}}`,{model:e.target_model_class}),e.fanout_strategy&&(0,G.jsxs)(`span`,{className:`text-bambu-gray/60`,children:[` · `,s(`settings.pipelines.field.fanoutShort.${e.fanout_strategy}`,e.fanout_strategy)]})]}):j?.name??``]})]}),e.description&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:e.description})]})}),(0,G.jsx)(`div`,{className:`flex items-center gap-1 flex-shrink-0`,children:c?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`button`,{onClick:()=>{let e=u.trim();e&&(r({name:e,description:f.trim()||null,target_kind:g,target_printer_id:g===`specific_printer`?m??0:0,target_model_class:g===`printer_class`&&v||null,fanout_strategy:x}),l(!1))},disabled:a||!u.trim(),"aria-label":s(`settings.pipelines.action.save`,`Save`),className:`p-1.5 text-bambu-green hover:bg-bambu-dark-tertiary rounded disabled:opacity-50`,children:(0,G.jsx)(fs,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>{d(e.name),p(e.description??``),h(e.target_printer_id),_(e.target_kind===`printer_class`?`printer_class`:`specific_printer`),b(e.target_model_class??``),S(e.fanout_strategy??`max_parallel`),l(!1)},"aria-label":s(`settings.pipelines.action.cancel`,`Cancel`),className:`p-1.5 text-bambu-gray hover:bg-bambu-dark-tertiary rounded`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`button`,{onClick:()=>l(!0),"aria-label":s(`settings.pipelines.action.rename`,`Rename`),className:`p-1.5 text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary rounded`,children:(0,G.jsx)(Ol,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:i,disabled:o,"aria-label":s(`settings.pipelines.action.delete`,`Delete`),className:`p-1.5 text-bambu-gray hover:text-red-600 dark:hover:text-red-400 hover:bg-bambu-dark-tertiary rounded disabled:opacity-50`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})})]}),!c&&(0,G.jsxs)(`div`,{className:`mt-2 grid grid-cols-1 md:grid-cols-2 gap-x-4 gap-y-2 text-xs`,children:[(0,G.jsxs)(`div`,{className:`space-y-0.5`,children:[(0,G.jsx)(`div`,{className:`text-[10px] uppercase tracking-wide text-bambu-gray/60`,children:s(`settings.pipelines.group.profiles`,`Profiles`)}),(0,G.jsx)(V8,{label:s(`settings.pipelines.slot.printer`,`Printer`),ref:e.printer_preset,name:E}),(0,G.jsx)(V8,{label:s(`settings.pipelines.slot.process`,`Process`),ref:e.process_preset,name:D}),e.bed_type&&(0,G.jsxs)(`div`,{className:`text-bambu-gray`,children:[(0,G.jsxs)(`span`,{className:`font-medium text-bambu-gray/80`,children:[s(`settings.pipelines.slot.bed`,`Bed`),`:`]}),` `,(0,G.jsx)(`span`,{className:`text-white`,children:e.bed_type})]})]}),(0,G.jsxs)(`div`,{className:`space-y-0.5`,children:[(0,G.jsxs)(`div`,{className:`text-[10px] uppercase tracking-wide text-bambu-gray/60`,children:[s(`settings.pipelines.group.filaments`,`Filaments`),e.filament_presets.length>1&&(0,G.jsxs)(`span`,{className:`text-bambu-gray/60 normal-case ml-1`,children:[`(`,e.filament_presets.length,`)`]})]}),k?(0,G.jsx)(V8,{label:s(`settings.pipelines.slot.filamentAll`,`All {{n}} slots`,{n:e.filament_presets.length}),ref:e.filament_presets[0],name:O[0]}):e.filament_presets.map((t,n)=>(0,G.jsx)(V8,{label:e.filament_presets.length>1?s(`settings.pipelines.slot.filamentN`,`Filament {{n}}`,{n:n+1}):s(`settings.pipelines.slot.filament`,`Filament`),ref:t,name:O[n]},n))]})]}),!c&&T&&(0,G.jsxs)(`div`,{className:`mt-1.5 text-xs text-bambu-gray flex items-center gap-1`,children:[(0,G.jsxs)(`span`,{className:`font-medium text-bambu-gray/80`,children:[s(`settings.pipelines.runs.lastRun`,`Last run`),`:`]}),` `,(0,G.jsx)(NUe,{status:T.status}),T.created_at&&(0,G.jsxs)(`span`,{className:`text-bambu-gray/60`,children:[`· `,new Date(T.created_at).toLocaleString()]})]}),N&&!c&&(0,G.jsxs)(`div`,{className:`mt-2 flex items-center gap-1.5 text-xs text-amber-700 dark:text-amber-400`,children:[(0,G.jsx)(Iu,{className:`w-3.5 h-3.5`}),s(`settings.pipelines.noTargetWarning`,`Set a target printer before running this pipeline.`)]}),A&&!c&&(0,G.jsxs)(`div`,{className:`mt-2 flex items-center gap-1.5 text-xs text-amber-700 dark:text-amber-400`,children:[(0,G.jsx)(Iu,{className:`w-3.5 h-3.5`}),s(`settings.pipelines.staleWarning`,`One or more referenced presets no longer exist. Re-save this pipeline from the Slice dialog to fix.`)]})]})}function NUe({status:e}){let{t}=U();return(0,G.jsx)(`span`,{className:{queued:`text-bambu-gray`,slicing:`text-blue-700 dark:text-blue-400`,dispatching:`text-blue-700 dark:text-blue-400`,in_progress:`text-bambu-green`,completed:`text-bambu-green`,failed:`text-red-700 dark:text-red-400`,partial_failure:`text-amber-700 dark:text-amber-400`,cancelled:`text-bambu-gray`}[e],children:t(`settings.pipelines.runs.status.${e}`,e)})}function V8({label:e,ref:t,name:n}){return(0,G.jsxs)(`div`,{className:`text-bambu-gray truncate`,children:[(0,G.jsxs)(`span`,{className:`font-medium text-bambu-gray/80`,children:[e,`:`]}),` `,n?(0,G.jsx)(`span`,{className:`text-white`,children:n}):(0,G.jsxs)(`span`,{className:`text-amber-700 dark:text-amber-400`,children:[`[`,AUe[t.source],` #`,t.id,`]`]})]})}var PUe=90,FUe=365;function H8(e){if(!e)return`—`;let t=ep(e);return t?t.toLocaleString():`—`}function IUe(e){let t=ep(e);return t?t.getTime()<Date.now():!1}function LUe({onCreated:e}){let{t}=U(),{showToast:n}=Gd(),[r,i]=(0,y.useState)(``),[a,o]=(0,y.useState)(PUe),[s,c]=(0,y.useState)(`camera_stream`),[l,u]=(0,y.useState)(!1);return(0,G.jsxs)(`form`,{onSubmit:async l=>{if(l.preventDefault(),r.trim()){u(!0);try{e(await Z.createLongLivedCameraToken({name:r.trim(),expires_in_days:a,scope:s})),i(``),o(PUe),c(`camera_stream`),n(t(`cameraTokens.toast.created`,`Token created`))}catch(e){n(e instanceof Error?e.message:t(`cameraTokens.toast.createFailed`,`Failed to create token`),`error`)}finally{u(!1)}}},className:`bg-bambu-dark-secondary rounded-lg p-4 mb-6 border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`h3`,{className:`text-base font-semibold text-white mb-3`,children:t(`cameraTokens.create.title`,`Create new token`)}),(0,G.jsxs)(`div`,{className:`grid gap-3 md:grid-cols-[1fr_180px_140px_auto]`,children:[(0,G.jsx)(`input`,{type:`text`,maxLength:100,required:!0,value:r,onChange:e=>i(e.target.value),placeholder:t(`cameraTokens.create.namePlaceholder`,`e.g. Home Assistant`),className:`px-3 py-2 bg-bambu-dark rounded-md text-white border border-bambu-dark-tertiary focus:border-bambu-green focus:outline-none`,"aria-label":t(`cameraTokens.create.nameLabel`,`Token name`)}),(0,G.jsxs)(`select`,{value:s,onChange:e=>c(e.target.value),className:`px-3 py-2 bg-bambu-dark rounded-md text-white border border-bambu-dark-tertiary focus:border-bambu-green focus:outline-none`,"aria-label":t(`cameraTokens.create.scopeLabel`,`Scope`),children:[(0,G.jsx)(`option`,{value:`camera_stream`,children:t(`cameraTokens.scope.camera_stream`,`Camera stream`)}),(0,G.jsx)(`option`,{value:`camwall`,children:t(`cameraTokens.scope.camwall`,`Cam Wall`)}),(0,G.jsx)(`option`,{value:`overlay`,children:t(`cameraTokens.scope.overlay`,`Streaming Overlay`)})]}),(0,G.jsx)(`input`,{type:`number`,min:1,max:FUe,required:!0,value:a,onChange:e=>{let t=Number(e.target.value);o(Math.min(Math.max(t,1),FUe))},className:`px-3 py-2 bg-bambu-dark rounded-md text-white border border-bambu-dark-tertiary focus:border-bambu-green focus:outline-none`,"aria-label":t(`cameraTokens.create.daysLabel`,`Days until expiry`)}),(0,G.jsxs)(`button`,{type:`submit`,disabled:l||!r.trim(),className:`flex items-center gap-2 px-4 py-2 bg-bambu-green text-white rounded-md hover:bg-bambu-green/90 disabled:opacity-50 disabled:cursor-not-allowed`,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),t(`cameraTokens.create.submit`,`Create`)]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-2`,children:s===`camwall`?t(`cameraTokens.create.hintCamWall`,`A Cam Wall token opens /camwall on a screen with no login — it can see every printer's name and state, and their camera streams. It cannot see filenames, addresses or access codes.`):s===`overlay`?t(`cameraTokens.create.hintOverlay`,`A Streaming Overlay token opens /overlay/{printerId} on a screen with no login — for OBS or any live stream. It can see one printer's camera stream plus its live print status, including the filename shown on screen. It cannot see addresses or access codes.`):t(`cameraTokens.create.hintCameraStream`,`A camera-stream token can only fetch camera streams and snapshots. Use it for Home Assistant, Frigate, or anything embedding a single camera.`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:t(`cameraTokens.create.hint`,`Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now.`)})]})}function RUe({token:e,onConfirm:t,onCancel:n}){let{t:r}=U();return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/60 flex items-center justify-center z-50 p-4`,role:`dialog`,"aria-modal":`true`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg p-6 max-w-md w-full border border-red-500/40`,children:[(0,G.jsxs)(`div`,{className:`flex items-start gap-3 mb-4`,children:[(0,G.jsx)(Iu,{className:`w-6 h-6 text-red-600 dark:text-red-400 flex-shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:r(`cameraTokens.confirmRevoke.title`,`Revoke this token?`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:r(`cameraTokens.confirmRevoke.body`,`Any device using "{{name}}" will lose access immediately. This cannot be undone.`,{name:e.name})})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:n,className:`px-4 py-2 bg-bambu-dark-tertiary text-white rounded-md hover:bg-bambu-dark-tertiary/80`,children:r(`cameraTokens.confirmRevoke.cancel`,`Cancel`)}),(0,G.jsx)(`button`,{type:`button`,onClick:t,className:`px-4 py-2 bg-red-500 text-white rounded-md hover:bg-red-600`,children:r(`cameraTokens.confirmRevoke.confirm`,`Revoke`)})]})]})})}function zUe({token:e,onClose:t}){let{t:n}=U(),{showToast:r}=Gd(),i=e.token??``,a=e.scope===`camwall`&&i?`${window.location.origin}/camwall?token=${encodeURIComponent(i)}`:null,o=e.scope===`overlay`&&i?`${window.location.origin}/overlay/1?token=${encodeURIComponent(i)}`:null,s=async e=>{if(e)try{if(navigator.clipboard&&window.isSecureContext)await navigator.clipboard.writeText(e);else{let t=document.createElement(`textarea`);t.value=e,t.style.position=`fixed`,t.style.opacity=`0`,document.body.appendChild(t);try{t.select(),document.execCommand(`copy`)}finally{document.body.removeChild(t)}}r(n(`cameraTokens.toast.copied`,`Copied to clipboard`))}catch{r(n(`cameraTokens.toast.copyFailed`,`Copy failed — select and copy manually`),`error`)}};return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/60 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg p-6 max-w-2xl w-full border border-bambu-green/40`,children:[(0,G.jsxs)(`div`,{className:`flex items-start gap-3 mb-4`,children:[(0,G.jsx)(Iu,{className:`w-6 h-6 text-yellow-600 dark:text-yellow-400 flex-shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:n(`cameraTokens.created.title`,`Token created — copy it now`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:n(`cameraTokens.created.warning`,`This is the only time this token will be visible. After you close this dialog you can never view it again.`)})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-4`,children:[(0,G.jsx)(`code`,{className:`flex-1 px-3 py-2 bg-bambu-dark rounded-md text-bambu-green text-xs break-all font-mono select-all`,children:i}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>s(i),className:`flex items-center gap-2 px-3 py-2 bg-bambu-green text-white rounded-md hover:bg-bambu-green/90`,children:[(0,G.jsx)(Vs,{className:`w-4 h-4`}),n(`cameraTokens.created.copy`,`Copy`)]})]}),a&&(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white mb-1`,children:n(`cameraTokens.created.camWallUrlTitle`,`Cam Wall URL for this display`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:n(`cameraTokens.created.camWallUrlHint`,`Open this on the screen. Anyone who can read the URL can watch the wall, so treat it like a key — revoke the token to cut the display off.`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`code`,{className:`flex-1 px-3 py-2 bg-bambu-dark rounded-md text-bambu-green text-xs break-all font-mono select-all`,children:a}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>s(a),className:`flex items-center gap-2 px-3 py-2 bg-bambu-green text-white rounded-md hover:bg-bambu-green/90`,children:[(0,G.jsx)(Vs,{className:`w-4 h-4`}),n(`cameraTokens.created.copy`,`Copy`)]})]})]}),o&&(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white mb-1`,children:n(`cameraTokens.created.overlayUrlTitle`,`Overlay URL for OBS`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:n(`cameraTokens.created.overlayUrlHint`,`Add this as a Browser Source in OBS. Change the /overlay/1 number to your printer's number (from its URL on the Printers page). Anyone who can read the URL can watch the stream, so treat it like a key — revoke the token to cut it off.`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`code`,{className:`flex-1 px-3 py-2 bg-bambu-dark rounded-md text-bambu-green text-xs break-all font-mono select-all`,children:o}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>s(o),className:`flex items-center gap-2 px-3 py-2 bg-bambu-green text-white rounded-md hover:bg-bambu-green/90`,children:[(0,G.jsx)(Vs,{className:`w-4 h-4`}),n(`cameraTokens.created.copy`,`Copy`)]})]})]}),(0,G.jsx)(`div`,{className:`flex justify-end`,children:(0,G.jsx)(`button`,{type:`button`,onClick:t,className:`px-4 py-2 bg-bambu-dark-tertiary text-white rounded-md hover:bg-bambu-dark-tertiary/80`,children:n(`cameraTokens.created.dismiss`,`I've saved it`)})})]})})}function BUe({token:e,showOwner:t,ownerLabel:n,onRevoke:r}){let{t:i}=U(),a=IUe(e.expires_at);return(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary last:border-b-0`,children:[(0,G.jsx)(`td`,{className:`py-3 px-3 text-white`,children:e.name}),t&&(0,G.jsx)(`td`,{className:`py-3 px-3 text-bambu-gray`,children:n}),(0,G.jsx)(`td`,{className:`py-3 px-3`,children:(0,G.jsx)(`span`,{className:`rounded bg-bambu-dark-tertiary px-2 py-0.5 text-xs text-bambu-gray`,children:i(`cameraTokens.scope.${e.scope}`,e.scope)})}),(0,G.jsxs)(`td`,{className:`py-3 px-3 text-bambu-gray font-mono text-xs`,children:[e.lookup_prefix,`…`]}),(0,G.jsx)(`td`,{className:`py-3 px-3 text-bambu-gray`,children:H8(e.created_at)}),(0,G.jsxs)(`td`,{className:`py-3 px-3 ${a?`text-red-700 dark:text-red-400`:`text-bambu-gray`}`,children:[H8(e.expires_at),a&&(0,G.jsx)(`span`,{className:`ml-2 px-2 py-0.5 text-xs bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-300 rounded`,children:i(`cameraTokens.list.expired`,`Expired`)})]}),(0,G.jsx)(`td`,{className:`py-3 px-3 text-bambu-gray`,children:H8(e.last_used_at)}),(0,G.jsx)(`td`,{className:`py-3 px-3 text-right`,children:(0,G.jsxs)(`button`,{type:`button`,onClick:()=>r(e.id),className:`inline-flex items-center gap-1 px-2 py-1 text-sm text-red-700 dark:text-red-400 hover:text-red-900 dark:hover:text-red-300`,title:i(`cameraTokens.list.revoke`,`Revoke`),children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),i(`cameraTokens.list.revoke`,`Revoke`)]})})]})}function VUe({tokens:e,showOwner:t,userIdToName:n,onRevoke:r,emptyMessage:i}){let{t:a}=U();return e.length===0?(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic`,children:i}):(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{className:`text-bambu-gray text-left border-b border-bambu-dark-tertiary`,children:(0,G.jsxs)(`tr`,{children:[(0,G.jsx)(`th`,{className:`py-2 px-3 font-medium`,children:a(`cameraTokens.list.name`,`Name`)}),t&&(0,G.jsx)(`th`,{className:`py-2 px-3 font-medium`,children:a(`cameraTokens.list.owner`,`Owner`)}),(0,G.jsx)(`th`,{className:`py-2 px-3 font-medium`,children:a(`cameraTokens.list.scope`,`Scope`)}),(0,G.jsx)(`th`,{className:`py-2 px-3 font-medium`,children:a(`cameraTokens.list.prefix`,`Prefix`)}),(0,G.jsx)(`th`,{className:`py-2 px-3 font-medium`,children:a(`cameraTokens.list.created`,`Created`)}),(0,G.jsx)(`th`,{className:`py-2 px-3 font-medium`,children:a(`cameraTokens.list.expires`,`Expires`)}),(0,G.jsx)(`th`,{className:`py-2 px-3 font-medium`,children:a(`cameraTokens.list.lastUsed`,`Last used`)}),(0,G.jsx)(`th`,{className:`py-2 px-3`})]})}),(0,G.jsx)(`tbody`,{children:e.map(e=>(0,G.jsx)(BUe,{token:e,showOwner:t,ownerLabel:n?.get(e.user_id)??`#${e.user_id}`,onRevoke:r},e.id))})]})})}function HUe(){let{t:e}=U(),{user:t,isAdmin:n}=jd(),{showToast:r}=Gd(),[i,a]=(0,y.useState)([]),[o,s]=(0,y.useState)([]),[c,l]=(0,y.useState)(new Map),[u,d]=(0,y.useState)(!0),[f,p]=(0,y.useState)(null),[m,h]=(0,y.useState)(null),g=async()=>{d(!0);try{if(a(await Z.listMyLongLivedCameraTokens()),n){s(await Z.listAllLongLivedCameraTokens());try{let e=await Z.getUsersSlim();l(new Map(e.map(e=>[e.id,e.username])))}catch{l(new Map)}}}catch(t){r(t instanceof Error?t.message:e(`cameraTokens.toast.loadFailed`,`Failed to load tokens`),`error`)}finally{d(!1)}};(0,y.useEffect)(()=>{g()},[n]);let _=async e=>{let t=[...i,...o].find(t=>t.id===e);t&&h(t)},v=async()=>{if(!m)return;let t=m.id;h(null);try{await Z.revokeLongLivedCameraToken(t),r(e(`cameraTokens.toast.revoked`,`Token revoked`)),await g()}catch(t){r(t instanceof Error?t.message:e(`cameraTokens.toast.revokeFailed`,`Failed to revoke token`),`error`)}},b=(0,y.useMemo)(()=>o.filter(e=>e.user_id!==t?.id),[o,t?.id]);return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4`,children:e(`cameraTokens.description`,`Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Each token is camera-stream-only and can be revoked at any time.`)}),(0,G.jsx)(LUe,{onCreated:e=>{p(e),g()}}),(0,G.jsxs)(`div`,{className:`mb-6`,children:[(0,G.jsx)(`h3`,{className:`text-base font-semibold text-white mb-3`,children:e(`cameraTokens.list.myTitle`,`My tokens`)}),u?(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`cameraTokens.loading`,`Loading…`)}):(0,G.jsx)(VUe,{tokens:i,onRevoke:_,emptyMessage:e(`cameraTokens.list.empty`,`No tokens yet.`)})]}),n&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-base font-semibold text-white mb-3`,children:e(`cameraTokens.list.allTitle`,`All users (admin view)`)}),(0,G.jsx)(VUe,{tokens:b,showOwner:!0,userIdToName:c,onRevoke:_,emptyMessage:e(`cameraTokens.list.empty`,`No tokens yet.`)})]}),f&&(0,G.jsx)(zUe,{token:f,onClose:()=>p(null)}),m&&(0,G.jsx)(RUe,{token:m,onConfirm:()=>void v(),onCancel:()=>h(null)})]})}var UUe=[{key:`printer`,labelKey:`streamOverlay.builder.fieldPrinter`,fallback:`Printer name`},{key:`filename`,labelKey:`streamOverlay.builder.fieldFilename`,fallback:`File name`},{key:`status`,labelKey:`streamOverlay.builder.fieldStatus`,fallback:`Status`},{key:`progress`,labelKey:`streamOverlay.builder.fieldProgress`,fallback:`Progress bar`},{key:`layers`,labelKey:`streamOverlay.builder.fieldLayers`,fallback:`Layer count`},{key:`eta`,labelKey:`streamOverlay.builder.fieldEta`,fallback:`Time remaining and ETA`},{key:`nozzle`,labelKey:`printers.heaterHistory.nozzle`,fallback:`Nozzle`},{key:`bed`,labelKey:`printers.heaterHistory.bed`,fallback:`Bed`},{key:`chamber`,labelKey:`printers.heaterHistory.chamber`,fallback:`Chamber`}],WUe=[`progress`,`layers`,`eta`,`filename`,`status`],GUe=15;function KUe(){let{t:e}=U(),{showToast:t}=Gd(),[n,r]=(0,y.useState)([]),[i,a]=(0,y.useState)(null),[o,s]=(0,y.useState)(WUe),[c,l]=(0,y.useState)(`medium`),[u,d]=(0,y.useState)(GUe),[f,p]=(0,y.useState)(!0),[m,h]=(0,y.useState)(``),[g,_]=(0,y.useState)(!1);(0,y.useEffect)(()=>{let e=!1;return(async()=>{try{let t=await Z.getPrinters();if(e)return;r(t),t.length>0&&a(t[0].id)}catch{}})(),()=>{e=!0}},[]);let v=(0,y.useMemo)(()=>{let e=i??1,t=new URLSearchParams,n=UUe.filter(e=>o.includes(e.key)).map(e=>e.key);return t.set(`show`,n.join(`,`)),c!==`medium`&&t.set(`size`,c),u!==GUe&&t.set(`fps`,String(u)),f||t.set(`camera`,`false`),m.trim()&&t.set(`token`,m.trim()),`${window.location.origin}/overlay/${e}?${t.toString()}`},[i,o,c,u,f,m]),b=e=>{s(t=>t.includes(e)?t.filter(t=>t!==e):[...t,e])},x=async()=>{try{if(navigator.clipboard&&window.isSecureContext)await navigator.clipboard.writeText(v);else{let e=document.createElement(`textarea`);e.value=v,e.style.position=`fixed`,e.style.opacity=`0`,document.body.appendChild(e);try{e.select(),document.execCommand(`copy`)}finally{document.body.removeChild(e)}}t(e(`cameraTokens.toast.copied`,`Copied to clipboard`))}catch{t(e(`cameraTokens.toast.copyFailed`,`Copy failed — select and copy manually`),`error`)}};return(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4`,children:e(`streamOverlay.builder.description`,`Build the URL for a streaming overlay — a full-screen camera view with live print data drawn over it, for OBS, a wall display, or any browser source. Pick the fields you want and copy the URL.`)}),(0,G.jsxs)(`div`,{className:`grid gap-4 md:grid-cols-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`overlay-builder-printer`,className:`block text-sm font-medium text-white mb-1`,children:e(`streamOverlay.builder.printer`,`Printer`)}),(0,G.jsxs)(`select`,{id:`overlay-builder-printer`,value:i??``,onChange:e=>a(Number(e.target.value)),className:`w-full px-3 py-2 bg-bambu-dark rounded-md text-white border border-bambu-dark-tertiary focus:border-bambu-green focus:outline-none`,children:[n.length===0&&(0,G.jsx)(`option`,{value:``,children:e(`common.loading`,`Loading…`)}),n.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`overlay-builder-size`,className:`block text-sm font-medium text-white mb-1`,children:e(`streamOverlay.builder.size`,`Text size`)}),(0,G.jsxs)(`select`,{id:`overlay-builder-size`,value:c,onChange:e=>l(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark rounded-md text-white border border-bambu-dark-tertiary focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`small`,children:e(`streamOverlay.builder.sizeSmall`,`Small`)}),(0,G.jsx)(`option`,{value:`medium`,children:e(`streamOverlay.builder.sizeMedium`,`Medium`)}),(0,G.jsx)(`option`,{value:`large`,children:e(`streamOverlay.builder.sizeLarge`,`Large`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`overlay-builder-fps`,className:`block text-sm font-medium text-white mb-1`,children:e(`streamOverlay.builder.fps`,`Frame rate`)}),(0,G.jsx)(`input`,{id:`overlay-builder-fps`,type:`number`,min:1,max:30,value:u,onChange:e=>d(Math.min(Math.max(Number(e.target.value)||1,1),30)),className:`w-full px-3 py-2 bg-bambu-dark rounded-md text-white border border-bambu-dark-tertiary focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`streamOverlay.builder.fpsHint`,`A1 and P1 cameras top out around 5 fps whatever you ask for.`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`overlay-builder-token`,className:`block text-sm font-medium text-white mb-1`,children:e(`streamOverlay.builder.token`,`Streaming Overlay token (optional)`)}),(0,G.jsx)(`input`,{id:`overlay-builder-token`,type:`text`,value:m,onChange:e=>h(e.target.value),placeholder:`bblt_…`,className:`w-full px-3 py-2 bg-bambu-dark rounded-md text-white border border-bambu-dark-tertiary focus:border-bambu-green focus:outline-none font-mono text-xs`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`streamOverlay.builder.tokenHint`,`Only needed when login is enabled: OBS has no session of its own. Create one above with the Streaming Overlay scope.`)})]})]}),(0,G.jsxs)(`fieldset`,{className:`mt-4`,children:[(0,G.jsx)(`legend`,{className:`text-sm font-medium text-white mb-2`,children:e(`streamOverlay.builder.fields`,`Fields to show`)}),(0,G.jsxs)(`div`,{className:`grid gap-2 sm:grid-cols-2 md:grid-cols-3`,children:[UUe.map(t=>(0,G.jsxs)(`label`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:o.includes(t.key),onChange:()=>b(t.key),className:`accent-bambu-green`}),e(t.labelKey,t.fallback)]},t.key)),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:f,onChange:e=>p(e.target.checked),className:`accent-bambu-green`}),e(`streamOverlay.builder.fieldCamera`,`Camera feed`)]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-2`,children:e(`streamOverlay.builder.chamberHint`,`Chamber temperature only appears on models with a real chamber sensor — P1 and A1 printers report a meaningless value, so it is left out there.`)})]}),(0,G.jsxs)(`div`,{className:`mt-4`,children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white mb-1`,children:e(`streamOverlay.builder.urlTitle`,`Overlay URL`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`code`,{className:`flex-1 px-3 py-2 bg-bambu-dark rounded-md text-bambu-green text-xs break-all font-mono select-all`,children:v}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>void x(),className:`flex items-center gap-2 px-3 py-2 bg-bambu-green text-white rounded-md hover:bg-bambu-green/90`,children:[(0,G.jsx)(Vs,{className:`w-4 h-4`}),e(`cameraTokens.created.copy`,`Copy`)]}),(0,G.jsxs)(`a`,{href:v,target:`_blank`,rel:`noopener noreferrer`,className:`flex items-center gap-2 px-3 py-2 bg-bambu-dark-tertiary text-white rounded-md hover:bg-bambu-dark-tertiary/80`,children:[(0,G.jsx)(nc,{className:`w-4 h-4`}),e(`streamOverlay.builder.open`,`Open`)]})]}),m.trim()&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-2`,children:e(`streamOverlay.builder.tokenWarning`,`This URL contains a token — anyone who can read it can watch the stream and see the file name. Revoke the token to cut it off.`)})]}),(0,G.jsxs)(`div`,{className:`mt-4`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>_(e=>!e),className:`flex items-center gap-2 px-3 py-2 bg-bambu-dark-tertiary text-white rounded-md hover:bg-bambu-dark-tertiary/80 text-sm`,children:[g?(0,G.jsx)(rc,{className:`w-4 h-4`}):(0,G.jsx)(ic,{className:`w-4 h-4`}),g?e(`streamOverlay.builder.hidePreview`,`Hide preview`):e(`streamOverlay.builder.showPreview`,`Show preview`)]}),g&&(0,G.jsx)(`iframe`,{src:v,title:e(`streamOverlay.builder.previewTitle`,`Overlay preview`),className:`mt-3 w-full aspect-video rounded-md border border-bambu-dark-tertiary bg-black`},v)]})]})}function qUe({plug:e,onEdit:t}){let{t:n}=U(),r=co(),{showToast:i}=Gd(),[a,o]=(0,y.useState)(!1),[s,c]=(0,y.useState)(!1),[l,u]=(0,y.useState)(!1),[d,f]=(0,y.useState)(!1),{data:p,isLoading:m}=K({queryKey:[`smart-plug-status`,e.id],queryFn:()=>Z.getSmartPlugStatus(e.id),refetchInterval:3e4}),{data:h}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),g=h?.find(t=>t.id===e.printer_id),_=q({mutationFn:t=>Z.controlSmartPlug(e.id,t),onMutate:async t=>{await r.cancelQueries({queryKey:[`smart-plug-status`,e.id]});let n=r.getQueryData([`smart-plug-status`,e.id]),i=t===`on`?`ON`:t===`off`||p?.state===`ON`?`OFF`:`ON`;return r.setQueryData([`smart-plug-status`,e.id],e=>({...e,state:i})),{previousStatus:n}},onError:(t,a,o)=>{o?.previousStatus&&r.setQueryData([`smart-plug-status`,e.id],o.previousStatus),i(n(`smartPlugs.failedToTurn`,{action:a,name:e.name}),`error`)},onSettled:()=>{setTimeout(()=>{r.invalidateQueries({queryKey:[`smart-plug-status`,e.id]}),r.invalidateQueries({queryKey:[`smart-plugs`]})},1e3)}}),v=q({mutationFn:t=>Z.updateSmartPlug(e.id,t),onSuccess:()=>{r.invalidateQueries({queryKey:[`smart-plugs`]}),e.printer_id&&(r.invalidateQueries({queryKey:[`smartPlugByPrinter`,e.printer_id]}),r.invalidateQueries({queryKey:[`scriptPlugsByPrinter`,e.printer_id]}))}}),b=q({mutationFn:()=>Z.deleteSmartPlug(e.id),onSuccess:()=>{r.invalidateQueries({queryKey:[`smart-plugs`]}),e.printer_id&&r.invalidateQueries({queryKey:[`scriptPlugsByPrinter`,e.printer_id]})}}),x=p?.state===`ON`,S=e.plug_type===`mqtt`&&p?.energy?.power!==null&&p?.energy?.power!==void 0,C=(p?.reachable??!1)||S,w=_.isPending,T=(()=>{if(e.plug_type!==`tasmota`||!e.ip_address)return null;let t=e.ip_address;return e.username&&e.password?`http://${encodeURIComponent(e.username)}:${encodeURIComponent(e.password)}@${t}/`:`http://${t}/`})();return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ld,{className:`relative`,children:(0,G.jsxs)(zd,{className:`p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-2 mb-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 min-w-0 flex-1`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg flex-shrink-0 ${e.plug_type===`mqtt`?C?`bg-teal-100 dark:bg-teal-500/20`:`bg-red-100 dark:bg-red-500/20`:C?x?`bg-bambu-green/20`:`bg-bambu-dark`:`bg-red-100 dark:bg-red-500/20`}`,children:e.plug_type===`mqtt`?(0,G.jsx)(zl,{className:`w-5 h-5 ${C?`text-teal-600 dark:text-teal-400`:`text-red-600 dark:text-red-400`}`}):e.plug_type===`homeassistant`?(0,G.jsx)(zc,{className:`w-5 h-5 ${C?x?`text-bambu-green`:`text-bambu-gray`:`text-red-600 dark:text-red-400`}`}):e.plug_type===`rest`?(0,G.jsx)(kc,{className:`w-5 h-5 ${C?x?`text-bambu-green`:`text-bambu-gray`:`text-red-600 dark:text-red-400`}`}):(0,G.jsx)(Nl,{className:`w-5 h-5 ${C?x?`text-bambu-green`:`text-bambu-gray`:`text-red-600 dark:text-red-400`}`})}),(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`h3`,{className:`font-medium text-white truncate`,children:e.name}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray truncate`,title:e.plug_type===`mqtt`?e.mqtt_topic??void 0:e.plug_type===`homeassistant`?e.ha_entity_id??void 0:e.plug_type===`rest`?e.rest_on_url??e.rest_off_url??void 0:e.ip_address??void 0,children:e.plug_type===`mqtt`?e.mqtt_topic:e.plug_type===`homeassistant`?e.ha_entity_id:e.plug_type===`rest`?e.rest_on_url||e.rest_off_url:e.ip_address})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-col items-end gap-1 flex-shrink-0`,children:[m?(0,G.jsx)(Y,{className:`w-4 h-4 text-bambu-gray animate-spin`}):e.plug_type===`mqtt`?(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-sm whitespace-nowrap`,children:[(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-teal-100 dark:bg-teal-500/20 text-teal-700 dark:text-teal-400 text-[10px] font-medium rounded flex-shrink-0`,children:`MQTT`}),C&&(0,G.jsx)(`span`,{className:`text-status-ok`,children:`✓`})]}):e.plug_type===`homeassistant`?(0,G.jsxs)(`div`,{className:`flex items-center gap-1 text-sm`,children:[(0,G.jsx)(`span`,{className:`px-1 py-0.5 bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400 text-[10px] font-medium rounded`,children:`HA`}),(0,G.jsx)(`span`,{className:C?x?`text-status-ok`:`text-bambu-gray`:`text-status-error`,children:C?p?.state||`?`:n(`smartPlugs.offline`)})]}):e.plug_type===`rest`?(0,G.jsxs)(`div`,{className:`flex items-center gap-1 text-sm`,children:[(0,G.jsx)(`span`,{className:`px-1 py-0.5 bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-400 text-[10px] font-medium rounded`,children:`REST`}),(0,G.jsx)(`span`,{className:C?x?`text-status-ok`:`text-bambu-gray`:`text-status-error`,children:C?p?.state||`?`:n(`smartPlugs.offline`)})]}):C?(0,G.jsxs)(`div`,{className:`flex items-center gap-1 text-sm`,children:[(0,G.jsx)(Zu,{className:`w-4 h-4 text-status-ok`}),(0,G.jsx)(`span`,{className:x?`text-status-ok`:`text-bambu-gray`,children:p?.state||n(`smartPlugs.unknown`)})]}):(0,G.jsxs)(`div`,{className:`flex items-center gap-1 text-sm text-status-error`,children:[(0,G.jsx)(Xu,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:n(`smartPlugs.offline`)})]}),T&&(0,G.jsxs)(`a`,{href:T,target:`_blank`,rel:`noopener noreferrer`,className:`flex items-center gap-1 px-2 py-0.5 bg-bambu-dark hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white text-xs rounded-full transition-colors`,title:n(`smartPlugs.openPlugAdminPage`),children:[(0,G.jsx)(nc,{className:`w-3 h-3`}),n(`smartPlugs.admin`)]})]})]}),g&&(0,G.jsxs)(`div`,{className:`mb-3 px-2 py-1.5 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[n(`smartPlugs.linkedTo`),` `]}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:g.name})]}),(e.power_alert_enabled||e.schedule_enabled||e.plug_type===`mqtt`)&&(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-1.5 mb-3`,children:[e.plug_type===`mqtt`&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 px-2 py-0.5 bg-teal-100 dark:bg-teal-500/20 text-teal-700 dark:text-teal-400 text-xs rounded-full`,children:[(0,G.jsx)(ic,{className:`w-3 h-3`}),n(`smartPlugs.monitorOnly`)]}),e.power_alert_enabled&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 px-2 py-0.5 bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400 text-xs rounded-full`,children:[(0,G.jsx)(qo,{className:`w-3 h-3`}),n(`smartPlugs.alerts`)]}),e.schedule_enabled&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 px-2 py-0.5 bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400 text-xs rounded-full`,children:[(0,G.jsx)(as,{className:`w-3 h-3`}),e.schedule_on_time&&e.schedule_off_time?`${e.schedule_on_time} - ${e.schedule_off_time}`:e.schedule_on_time?n(`smartPlugs.scheduleOn`,{time:e.schedule_on_time}):n(`smartPlugs.scheduleOff`,{time:e.schedule_off_time})]})]}),e.plug_type!==`mqtt`&&(0,G.jsxs)(`div`,{className:`flex gap-2 mb-3`,children:[(0,G.jsxs)(Q,{size:`sm`,variant:x?`primary`:`secondary`,disabled:!C||w,onClick:()=>c(!0),className:`flex-1`,children:[w?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Il,{className:`w-4 h-4`}),n(`smartPlugs.on`)]}),(0,G.jsxs)(Q,{size:`sm`,variant:x?`secondary`:`primary`,disabled:!C||w,onClick:()=>u(!0),className:`flex-1`,children:[w?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Fl,{className:`w-4 h-4`}),n(`smartPlugs.off`)]})]}),e.plug_type===`mqtt`&&p?.energy&&(0,G.jsxs)(`div`,{className:`flex gap-2 mb-3 px-3 py-2 bg-bambu-dark rounded-lg`,children:[p.energy.power!==null&&p.energy.power!==void 0&&(0,G.jsxs)(`div`,{className:`flex-1 text-center`,children:[(0,G.jsxs)(`p`,{className:`text-lg font-semibold text-white`,children:[Math.round(p.energy.power),`W`]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.power`)})]}),p.energy.today!==null&&p.energy.today!==void 0&&(0,G.jsxs)(`div`,{className:`flex-1 text-center border-l border-bambu-dark-tertiary`,children:[(0,G.jsx)(`p`,{className:`text-lg font-semibold text-white`,children:p.energy.today.toFixed(3)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.kwhToday`)})]})]}),(0,G.jsxs)(`button`,{onClick:()=>f(!d),className:`w-full flex items-center justify-between py-2 text-sm text-bambu-gray hover:text-white transition-colors`,children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(tu,{className:`w-4 h-4`}),e.plug_type===`mqtt`?n(`smartPlugs.settings`):n(`smartPlugs.automationSettings`)]}),(0,G.jsx)(`span`,{children:d?`-`:`+`})]}),d&&(0,G.jsxs)(`div`,{className:`pt-3 border-t border-bambu-dark-tertiary space-y-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Jc,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`smartPlugs.showInSwitchbar`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.quickAccessSidebar`)})]})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:e.show_in_switchbar,onChange:e=>v.mutate({show_in_switchbar:e.target.checked}),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-9 h-5 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-4 after:w-4 after:transition-all peer-checked:bg-bambu-green`})]})]}),e.printer_id!=null&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Il,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`smartPlugs.controlsPrinterPower`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.controlsPrinterPowerDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:e.controls_printer_power,onChange:e=>v.mutate({controls_printer_power:e.target.checked}),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-9 h-5 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-4 after:w-4 after:transition-all peer-checked:bg-bambu-green`})]})]}),e.plug_type!==`mqtt`&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`smartPlugs.enabled`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.enableAutomation`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:e.enabled,onChange:e=>v.mutate({enabled:e.target.checked}),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-9 h-5 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-4 after:w-4 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`smartPlugs.autoOn`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.autoOnDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:e.auto_on,onChange:e=>v.mutate({auto_on:e.target.checked}),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-9 h-5 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-4 after:w-4 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`smartPlugs.autoOff`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.autoOffDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:e.auto_off,onChange:e=>v.mutate({auto_off:e.target.checked}),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-9 h-5 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-4 after:w-4 after:transition-all peer-checked:bg-bambu-green`})]})]}),e.auto_off&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between pl-4 border-l-2 border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`smartPlugs.autoOffPersistent`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.autoOffPersistentDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:e.auto_off_persistent,onChange:e=>v.mutate({auto_off_persistent:e.target.checked}),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-9 h-5 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-4 after:w-4 after:transition-all peer-checked:bg-bambu-green`})]})]}),e.auto_off&&(0,G.jsxs)(`div`,{className:`space-y-3 pl-4 border-l-2 border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white mb-2`,children:n(`smartPlugs.turnOffDelayMode`)}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(`button`,{onClick:()=>v.mutate({off_delay_mode:`time`}),className:`flex-1 flex items-center justify-center gap-2 px-3 py-2 rounded-lg text-sm transition-colors ${e.off_delay_mode===`time`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(js,{className:`w-4 h-4`}),n(`smartPlugs.time`)]}),(0,G.jsxs)(`button`,{onClick:()=>v.mutate({off_delay_mode:`temperature`}),className:`flex-1 flex items-center justify-center gap-2 px-3 py-2 rounded-lg text-sm transition-colors ${e.off_delay_mode===`temperature`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(ju,{className:`w-4 h-4`}),n(`smartPlugs.temp`)]})]})]}),e.off_delay_mode===`time`?(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:n(`smartPlugs.delayMinutes`)}),(0,G.jsx)(`input`,{type:`number`,min:`1`,max:`60`,value:e.off_delay_minutes,onChange:e=>v.mutate({off_delay_minutes:parseInt(e.target.value)||5}),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`})]}):(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:n(`smartPlugs.tempThreshold`)}),(0,G.jsx)(`input`,{type:`number`,min:`30`,max:`100`,value:e.off_temp_threshold,onChange:e=>v.mutate({off_temp_threshold:parseInt(e.target.value)||70}),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(`smartPlugs.tempThresholdDescription`)})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`smartPlugs.autoOffAfterDrying`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.autoOffAfterDryingDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:e.auto_off_after_drying,onChange:e=>v.mutate({auto_off_after_drying:e.target.checked}),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-9 h-5 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-4 after:w-4 after:transition-all peer-checked:bg-bambu-green`})]})]}),e.auto_off_after_drying&&(0,G.jsxs)(`div`,{className:`pl-4 border-l-2 border-bambu-dark-tertiary`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:n(`smartPlugs.delayAfterDryingMinutes`)}),(0,G.jsx)(`input`,{type:`number`,min:`0`,max:`120`,value:e.off_delay_after_drying_minutes,onChange:e=>v.mutate({off_delay_after_drying_minutes:parseInt(e.target.value)||10}),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 pt-2`,children:[(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>t(e),className:`flex-1`,children:[(0,G.jsx)(Ol,{className:`w-4 h-4`}),n(`smartPlugs.edit`)]}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>o(!0),className:`text-red-600 dark:text-red-400 hover:text-red-700 dark:hover:text-red-300`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})]})]})}),a&&(0,G.jsx)(rf,{title:n(`smartPlugs.deleteSmartPlug`),message:n(`smartPlugs.deleteConfirm`,{name:e.name}),confirmText:n(`smartPlugs.delete`),variant:`danger`,onConfirm:()=>{b.mutate(),o(!1)},onCancel:()=>o(!1)}),s&&(0,G.jsx)(rf,{title:n(`smartPlugs.turnOnSmartPlug`),message:n(`smartPlugs.turnOnConfirm`,{name:e.name}),confirmText:n(`smartPlugs.turnOn`),variant:`default`,onConfirm:()=>{_.mutate(`on`),c(!1)},onCancel:()=>c(!1)}),l&&(0,G.jsx)(rf,{title:n(`smartPlugs.turnOffSmartPlug`),message:n(`smartPlugs.turnOffConfirm`,{name:e.name}),confirmText:n(`smartPlugs.turnOff`),variant:`danger`,onConfirm:()=>{_.mutate(`off`),u(!1)},onCancel:()=>u(!1)})]})}function JUe({plug:e,onClose:t}){let{t:n}=U(),r=co(),i=!!e,[a,o]=(0,y.useState)(e?.plug_type||`tasmota`),[s,c]=(0,y.useState)(e?.name||``),[l,u]=(0,y.useState)(e?.ip_address||``),[d,f]=(0,y.useState)(e?.username||``),[p,m]=(0,y.useState)(e?.password||``),[h,g]=(0,y.useState)(e?.ha_entity_id||``),[_,v]=(0,y.useState)(e?.mqtt_power_topic||e?.mqtt_topic||``),[b,x]=(0,y.useState)(e?.mqtt_power_path||``),[S,C]=(0,y.useState)((e?.mqtt_power_multiplier??e?.mqtt_multiplier??1).toString()),[w,T]=(0,y.useState)(e?.mqtt_energy_topic||``),[E,D]=(0,y.useState)(e?.mqtt_energy_path||``),[O,k]=(0,y.useState)((e?.mqtt_energy_multiplier??1).toString()),[A,j]=(0,y.useState)(e?.mqtt_state_topic||``),[M,N]=(0,y.useState)(e?.mqtt_state_path||``),[P,F]=(0,y.useState)(e?.mqtt_state_on_value||``),[I,L]=(0,y.useState)(e?.rest_on_url||``),[R,z]=(0,y.useState)(e?.rest_on_body||``),[B,V]=(0,y.useState)(e?.rest_off_url||``),[ee,te]=(0,y.useState)(e?.rest_off_body||``),[ne,re]=(0,y.useState)(e?.rest_method||`POST`),[ie,ae]=(0,y.useState)(e?.rest_headers||``),[oe,se]=(0,y.useState)(e?.rest_status_url||``),[H,ce]=(0,y.useState)(e?.rest_status_path||``),[le,ue]=(0,y.useState)(e?.rest_status_on_value||``),[de,fe]=(0,y.useState)(e?.rest_power_url||``),[pe,me]=(0,y.useState)(e?.rest_power_path||``),[he,ge]=(0,y.useState)((e?.rest_power_multiplier??1).toString()),[_e,ve]=(0,y.useState)(e?.rest_energy_url||``),[ye,be]=(0,y.useState)(e?.rest_energy_path||``),[xe,Se]=(0,y.useState)((e?.rest_energy_multiplier??1).toString()),[Ce,we]=(0,y.useState)(e?.rest_energy_total_path||``),[Te,Ee]=(0,y.useState)((e?.rest_energy_total_multiplier??1).toString()),[De,Oe]=(0,y.useState)(e?.ha_power_entity||``),[ke,Ae]=(0,y.useState)(e?.ha_energy_today_entity||``),[je,Me]=(0,y.useState)(e?.ha_energy_total_entity||``),[Ne,Pe]=(0,y.useState)(``),[Fe,Ie]=(0,y.useState)(``),[Le,Re]=(0,y.useState)(!1),ze=(0,y.useRef)(null),[Be,Ve]=(0,y.useState)(``),[He,Ue]=(0,y.useState)(!1),We=(0,y.useRef)(null),[Ge,Ke]=(0,y.useState)(``),[qe,Je]=(0,y.useState)(!1),Ye=(0,y.useRef)(null),[Xe,Ze]=(0,y.useState)(``),[Qe,$e]=(0,y.useState)(!1),et=(0,y.useRef)(null),[tt,nt]=(0,y.useState)(e?.printer_id||null),[rt,it]=(0,y.useState)(e?.controls_printer_power??!0),[at,ot]=(0,y.useState)(null),[st,ct]=(0,y.useState)(null),[lt,ut]=(0,y.useState)(e?.power_alert_enabled||!1),[dt,ft]=(0,y.useState)(e?.power_alert_high?.toString()||``),[pt,mt]=(0,y.useState)(e?.power_alert_low?.toString()||``),[ht,gt]=(0,y.useState)(e?.schedule_enabled||!1),[_t,vt]=(0,y.useState)(e?.schedule_on_time||``),[yt,bt]=(0,y.useState)(e?.schedule_off_time||``),[xt,St]=(0,y.useState)(e?.show_in_switchbar||!1),[Ct,wt]=(0,y.useState)(e?.show_on_printer_card??!0),[Tt,Et]=(0,y.useState)(!1),[Dt,Ot]=(0,y.useState)({scanned:0,total:0}),[kt,At]=(0,y.useState)([]),jt=(0,y.useRef)(null),{data:Mt}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:Nt}=K({queryKey:[`smart-plugs`],queryFn:Z.getSmartPlugs}),{data:Pt}=K({queryKey:[`settings`],queryFn:Z.getSettings}),Ft=!!(Pt?.ha_enabled&&Pt?.ha_url&&Pt?.ha_token);(0,y.useEffect)(()=>{let e=setTimeout(()=>{Ie(Ne)},300);return()=>clearTimeout(e)},[Ne]),(0,y.useEffect)(()=>{let e=e=>{ze.current&&!ze.current.contains(e.target)&&Re(!1),We.current&&!We.current.contains(e.target)&&Ue(!1),Ye.current&&!Ye.current.contains(e.target)&&Je(!1),et.current&&!et.current.contains(e.target)&&$e(!1)};return document.addEventListener(`mousedown`,e),()=>document.removeEventListener(`mousedown`,e)},[]);let{data:It,isLoading:Lt,error:Rt}=K({queryKey:[`ha-entities`,Fe],queryFn:()=>Z.getHAEntities(Fe||void 0),enabled:a===`homeassistant`&&Ft,retry:!1,staleTime:0}),{data:zt}=K({queryKey:[`ha-sensor-entities`],queryFn:Z.getHASensorEntities,enabled:a===`homeassistant`&&Ft,retry:!1,staleTime:0});(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&t()};return window.addEventListener(`keydown`,e),()=>{window.removeEventListener(`keydown`,e),jt.current&&clearInterval(jt.current)}},[t]);let Bt=async()=>{Et(!0),At([]),Ot({scanned:0,total:0}),ct(null);try{await Z.startTasmotaScan();let e=async()=>{try{let e=await Z.getTasmotaScanStatus();Ot({scanned:e.scanned,total:e.total}),At(await Z.getDiscoveredTasmotaDevices()),e.running||(Et(!1),jt.current&&=(clearInterval(jt.current),null))}catch(e){console.error(`Polling error:`,e)}};await e(),jt.current=setInterval(e,500)}catch(e){Et(!1),ct((e instanceof Error?e.message:typeof e==`string`?e:JSON.stringify(e))||n(`smartPlugs.failedToStartScan`))}},Vt=async()=>{try{await Z.stopTasmotaScan()}catch{}Et(!1),jt.current&&=(clearInterval(jt.current),null)},Ht=e=>{u(e.ip_address),c(e.name),ot(null)},Ut=q({mutationFn:()=>Z.testSmartPlugConnection(l,d||null,p||null),onSuccess:e=>{ot(e),ct(null),!s&&e.device_name&&c(e.device_name)},onError:e=>{ot(null),ct(e.message)}}),Wt=q({mutationFn:e=>Z.createSmartPlug(e),onSuccess:()=>{r.invalidateQueries({queryKey:[`smart-plugs`]}),r.invalidateQueries({queryKey:[`scriptPlugsByPrinter`]}),t()},onError:e=>{ct(e.message)}}),Gt=q({mutationFn:t=>Z.updateSmartPlug(e.id,t),onSuccess:()=>{r.invalidateQueries({queryKey:[`smart-plugs`]}),r.invalidateQueries({queryKey:[`scriptPlugsByPrinter`]}),t()},onError:e=>{ct(e.message)}}),Kt=Mt?.filter(t=>a===`tasmota`?!Nt?.some(n=>n.printer_id===t.id&&n.id!==e?.id&&n.plug_type===`tasmota`):!0),qt=e=>{if(e.preventDefault(),ct(null),!s.trim()){ct(n(`smartPlugs.nameRequired`));return}if(a===`tasmota`&&!l.trim()){ct(`IP address is required for Tasmota plugs`);return}if(a===`homeassistant`&&!h){ct(n(`smartPlugs.entityRequired`));return}if(a===`mqtt`){let e=_.trim(),t=w.trim(),r=A.trim();if(!e&&!t&&!r){ct(n(`smartPlugs.mqttTopicRequired`));return}}if(a===`rest`&&!I.trim()&&!B.trim()){ct(n(`smartPlugs.restUrlRequired`));return}let t={name:s.trim(),plug_type:a,ip_address:a===`tasmota`?l.trim():null,ha_entity_id:a===`homeassistant`?h:null,ha_power_entity:a===`homeassistant`&&De||null,ha_energy_today_entity:a===`homeassistant`&&ke||null,ha_energy_total_entity:a===`homeassistant`&&je||null,mqtt_power_topic:a===`mqtt`&&_.trim()||null,mqtt_power_path:a===`mqtt`&&b.trim()||null,mqtt_power_multiplier:a===`mqtt`&&parseFloat(S)||1,mqtt_energy_topic:a===`mqtt`&&w.trim()||null,mqtt_energy_path:a===`mqtt`&&E.trim()||null,mqtt_energy_multiplier:a===`mqtt`&&parseFloat(O)||1,mqtt_state_topic:a===`mqtt`&&A.trim()||null,mqtt_state_path:a===`mqtt`&&M.trim()||null,mqtt_state_on_value:a===`mqtt`&&P.trim()||null,rest_on_url:a===`rest`&&I.trim()||null,rest_on_body:a===`rest`&&R.trim()||null,rest_off_url:a===`rest`&&B.trim()||null,rest_off_body:a===`rest`&&ee.trim()||null,rest_method:a===`rest`?ne:null,rest_headers:a===`rest`&&ie.trim()||null,rest_status_url:a===`rest`&&oe.trim()||null,rest_status_path:a===`rest`&&H.trim()||null,rest_status_on_value:a===`rest`&&le.trim()||null,rest_power_url:a===`rest`&&de.trim()||null,rest_power_path:a===`rest`&&pe.trim()||null,rest_power_multiplier:a===`rest`&&parseFloat(he)||1,rest_energy_url:a===`rest`&&_e.trim()||null,rest_energy_path:a===`rest`&&ye.trim()||null,rest_energy_multiplier:a===`rest`&&parseFloat(xe)||1,rest_energy_total_path:a===`rest`&&Ce.trim()||null,rest_energy_total_multiplier:a===`rest`&&parseFloat(Te)||1,username:a===`tasmota`&&d.trim()||null,password:a===`tasmota`&&p.trim()||null,printer_id:tt,controls_printer_power:rt,power_alert_enabled:lt,power_alert_high:dt?parseFloat(dt):null,power_alert_low:pt?parseFloat(pt):null,schedule_enabled:ht,schedule_on_time:_t||null,schedule_off_time:yt||null,show_in_switchbar:xt,show_on_printer_card:Ct};i?Gt.mutate(t):Wt.mutate(t)},Jt=Wt.isPending||Gt.isPending;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:t,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-md max-h-[90vh] flex flex-col`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary flex-shrink-0`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:n(i?`smartPlugs.editTitle`:`smartPlugs.addTitle`)}),(0,G.jsx)(`button`,{onClick:t,className:`text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`form`,{onSubmit:qt,className:`p-6 space-y-4 overflow-y-auto`,children:[st&&(0,G.jsx)(`div`,{className:`p-3 bg-red-100 dark:bg-red-500/20 border border-red-400 dark:border-red-500/50 rounded-lg text-sm text-red-700 dark:text-red-400`,children:st}),!i&&(0,G.jsxs)(`div`,{className:`flex gap-2 mb-2`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{o(`tasmota`),ot(null),ct(null)},className:`flex-1 flex items-center justify-center gap-2 px-3 py-2.5 rounded-lg font-medium transition-colors ${a===`tasmota`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white border border-bambu-dark-tertiary`}`,children:[(0,G.jsx)(Nl,{className:`w-4 h-4`}),`Tasmota`]}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{o(`homeassistant`),ot(null),ct(null)},className:`flex-1 flex items-center justify-center gap-2 px-3 py-2.5 rounded-lg font-medium transition-colors ${a===`homeassistant`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white border border-bambu-dark-tertiary`}`,children:[(0,G.jsx)(zc,{className:`w-4 h-4`}),`HA`]}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{o(`mqtt`),ot(null),ct(null)},className:`flex-1 flex items-center justify-center gap-2 px-3 py-2.5 rounded-lg font-medium transition-colors ${a===`mqtt`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white border border-bambu-dark-tertiary`}`,children:[(0,G.jsx)(zl,{className:`w-4 h-4`}),`MQTT`]}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{o(`rest`),ot(null),ct(null)},className:`flex-1 flex items-center justify-center gap-2 px-3 py-2.5 rounded-lg font-medium transition-colors ${a===`rest`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white border border-bambu-dark-tertiary`}`,children:[(0,G.jsx)(kc,{className:`w-4 h-4`}),`REST`]})]}),!i&&a===`tasmota`&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[Tt?(0,G.jsxs)(Q,{type:`button`,variant:`secondary`,onClick:Vt,className:`w-full`,children:[(0,G.jsx)(td,{className:`w-4 h-4`}),n(`smartPlugs.stopScanning`)]}):(0,G.jsxs)(Q,{type:`button`,variant:`primary`,onClick:Bt,className:`w-full`,children:[(0,G.jsx)(Zl,{className:`w-4 h-4`}),n(`smartPlugs.discoverTasmota`)]}),Tt&&Dt.total>0&&(0,G.jsxs)(`div`,{className:`space-y-1`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between text-xs text-bambu-gray`,children:[(0,G.jsx)(`span`,{children:n(`smartPlugs.addSmartPlug.scanningNetwork`)}),(0,G.jsxs)(`span`,{children:[Dt.scanned,` / `,Dt.total]})]}),(0,G.jsx)(`div`,{className:`w-full bg-bambu-dark-tertiary rounded-full h-2`,children:(0,G.jsx)(`div`,{className:`bg-bambu-green h-2 rounded-full transition-all duration-300`,style:{width:`${Dt.scanned/Dt.total*100}%`}})})]}),kt.length>0&&(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.foundDevices`,{count:kt.length})}),(0,G.jsx)(`div`,{className:`max-h-40 overflow-y-auto space-y-1`,children:kt.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>Ht(e),className:`w-full flex items-center justify-between p-2 bg-bambu-dark hover:bg-bambu-dark-tertiary rounded-lg transition-colors text-left border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Nl,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:e.name}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:e.ip_address})]})]}),e.state&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-xs ${e.state===`ON`?`text-bambu-green`:`text-bambu-gray`}`,children:[(0,G.jsx)(Il,{className:`w-3 h-3`}),e.state]})]},e.ip_address))})]}),!Tt&&kt.length===0&&Dt.total>0&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray text-center py-2`,children:n(`smartPlugs.noDevicesFound`)})]}),a===`homeassistant`&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[!Ft&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`p-3 bg-yellow-100 dark:bg-yellow-500/20 border border-yellow-400 dark:border-yellow-500/50 rounded-lg text-sm text-yellow-700 dark:text-yellow-400`,children:[n(`smartPlugs.haNotConfigured`),` `,(0,G.jsx)(`span`,{className:`font-medium`,children:n(`smartPlugs.haSettingsPath`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1 opacity-50`,children:n(`smartPlugs.selectEntity`)}),(0,G.jsx)(`select`,{disabled:!0,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray cursor-not-allowed opacity-50`,children:(0,G.jsx)(`option`,{children:n(`smartPlugs.addSmartPlug.chooseEntity`)})})]})]}),Ft&&(0,G.jsxs)(G.Fragment,{children:[Lt&&(0,G.jsxs)(`div`,{className:`flex items-center justify-center py-4 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-5 h-5 animate-spin mr-2`}),n(`smartPlugs.loadingEntities`)]}),Rt&&(0,G.jsx)(`div`,{className:`p-3 bg-red-100 dark:bg-red-500/20 border border-red-400 dark:border-red-500/50 rounded-lg text-sm text-red-700 dark:text-red-400`,children:n(`smartPlugs.failedToLoadEntities`,{error:Rt.message})}),(()=>{let t=Nt?.filter(t=>t.ha_entity_id&&t.id!==e?.id).map(e=>e.ha_entity_id)||[],r=(It||[]).filter(e=>!t.includes(e.entity_id)),i=It?.find(e=>e.entity_id===h);return(0,G.jsxs)(`div`,{ref:ze,className:`relative`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.selectEntity`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`}),(0,G.jsx)(`input`,{type:`text`,value:Le?Ne:i?`${i.friendly_name} (${i.entity_id})`:``,onChange:e=>{Pe(e.target.value),Le||Re(!0)},onFocus:()=>{Re(!0),Pe(``)},placeholder:n(`smartPlugs.addSmartPlug.placeholders.searchEntities`),className:`w-full pl-9 pr-8 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`}),h&&!Le&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>{g(``),Pe(``)},className:`absolute right-2 top-1/2 -translate-y-1/2 p-1 hover:bg-bambu-dark-tertiary rounded`,children:(0,G.jsx)(td,{className:`w-4 h-4 text-bambu-gray hover:text-white`})}),Lt&&(0,G.jsx)(Y,{className:`absolute right-2 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray animate-spin`})]}),Le&&(0,G.jsxs)(`div`,{className:`absolute z-50 w-full mt-1 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg shadow-lg max-h-60 overflow-y-auto`,children:[Lt&&(0,G.jsxs)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray flex items-center gap-2`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),n(`smartPlugs.loading`)]}),!Lt&&r.length===0&&(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:Fe?n(`smartPlugs.noEntitiesMatching`,{search:Fe}):n(`smartPlugs.noEntitiesAvailable`)}),!Lt&&r.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{g(e.entity_id),Re(!1),Pe(``),s||c(e.friendly_name)},className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary transition-colors ${e.entity_id===h?`bg-bambu-green/20 text-bambu-green`:`text-white`}`,children:[(0,G.jsx)(`div`,{className:`font-medium`,children:e.friendly_name}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray flex items-center justify-between`,children:[(0,G.jsx)(`span`,{children:e.entity_id}),(0,G.jsx)(`span`,{className:e.state===`on`?`text-bambu-green`:``,children:e.state})]})]},e.entity_id))]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(Fe?`smartPlugs.searchingEntities`:`smartPlugs.showingEntities`,{count:r.length})})]})})(),h&&zt&&zt.length>0&&(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary pt-4 mt-4 space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium mb-1`,children:n(`smartPlugs.energyMonitoringOptional`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-3`,children:n(`smartPlugs.energyMonitoringHint`)})]}),(()=>{let e=zt.filter(e=>e.unit_of_measurement===`W`||e.unit_of_measurement===`kW`||e.unit_of_measurement===`mW`),t=Be?e.filter(e=>e.entity_id.toLowerCase().includes(Be.toLowerCase())||e.friendly_name.toLowerCase().includes(Be.toLowerCase())):e,r=zt.find(e=>e.entity_id===De);return(0,G.jsxs)(`div`,{ref:We,className:`relative`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.powerSensorW`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`}),(0,G.jsx)(`input`,{type:`text`,value:He?Be:r?`${r.friendly_name} (${r.state} ${r.unit_of_measurement})`:``,onChange:e=>{Ve(e.target.value),He||Ue(!0)},onFocus:()=>{Ue(!0),Ve(``)},placeholder:n(`smartPlugs.addSmartPlug.placeholders.searchPowerSensors`),className:`w-full pl-9 pr-8 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`}),De&&!He&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>{Oe(``),Ve(``)},className:`absolute right-2 top-1/2 -translate-y-1/2 p-1 hover:bg-bambu-dark-tertiary rounded`,children:(0,G.jsx)(td,{className:`w-4 h-4 text-bambu-gray hover:text-white`})})]}),He&&(0,G.jsxs)(`div`,{className:`absolute z-50 w-full mt-1 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg shadow-lg max-h-48 overflow-y-auto`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>{Oe(``),Ue(!1),Ve(``)},className:`w-full px-3 py-2 text-left text-sm text-bambu-gray hover:bg-bambu-dark-tertiary`,children:n(`smartPlugs.none`)}),t.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{Oe(e.entity_id),Ue(!1),Ve(``)},className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary ${e.entity_id===De?`bg-bambu-green/20 text-bambu-green`:`text-white`}`,children:[(0,G.jsx)(`div`,{className:`font-medium`,children:e.friendly_name}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray`,children:[e.entity_id,` • `,e.state,` `,e.unit_of_measurement]})]},e.entity_id)),t.length===0&&(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:n(`smartPlugs.noMatchingSensors`)})]})]})})(),(()=>{let e=zt.filter(e=>e.unit_of_measurement===`kWh`||e.unit_of_measurement===`Wh`||e.unit_of_measurement===`MWh`),t=Ge?e.filter(e=>e.entity_id.toLowerCase().includes(Ge.toLowerCase())||e.friendly_name.toLowerCase().includes(Ge.toLowerCase())):e,r=zt.find(e=>e.entity_id===ke);return(0,G.jsxs)(`div`,{ref:Ye,className:`relative`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.energyTodayKwh`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`}),(0,G.jsx)(`input`,{type:`text`,value:qe?Ge:r?`${r.friendly_name} (${r.state} ${r.unit_of_measurement})`:``,onChange:e=>{Ke(e.target.value),qe||Je(!0)},onFocus:()=>{Je(!0),Ke(``)},placeholder:n(`smartPlugs.addSmartPlug.placeholders.searchEnergySensors`),className:`w-full pl-9 pr-8 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`}),ke&&!qe&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>{Ae(``),Ke(``)},className:`absolute right-2 top-1/2 -translate-y-1/2 p-1 hover:bg-bambu-dark-tertiary rounded`,children:(0,G.jsx)(td,{className:`w-4 h-4 text-bambu-gray hover:text-white`})})]}),qe&&(0,G.jsxs)(`div`,{className:`absolute z-50 w-full mt-1 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg shadow-lg max-h-48 overflow-y-auto`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>{Ae(``),Je(!1),Ke(``)},className:`w-full px-3 py-2 text-left text-sm text-bambu-gray hover:bg-bambu-dark-tertiary`,children:n(`smartPlugs.none`)}),t.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{Ae(e.entity_id),Je(!1),Ke(``)},className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary ${e.entity_id===ke?`bg-bambu-green/20 text-bambu-green`:`text-white`}`,children:[(0,G.jsx)(`div`,{className:`font-medium`,children:e.friendly_name}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray`,children:[e.entity_id,` • `,e.state,` `,e.unit_of_measurement]})]},e.entity_id)),t.length===0&&(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:n(`smartPlugs.noMatchingSensors`)})]})]})})(),(()=>{let e=zt.filter(e=>e.unit_of_measurement===`kWh`||e.unit_of_measurement===`Wh`||e.unit_of_measurement===`MWh`),t=Xe?e.filter(e=>e.entity_id.toLowerCase().includes(Xe.toLowerCase())||e.friendly_name.toLowerCase().includes(Xe.toLowerCase())):e,r=zt.find(e=>e.entity_id===je);return(0,G.jsxs)(`div`,{ref:et,className:`relative`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.totalEnergyKwh`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`}),(0,G.jsx)(`input`,{type:`text`,value:Qe?Xe:r?`${r.friendly_name} (${r.state} ${r.unit_of_measurement})`:``,onChange:e=>{Ze(e.target.value),Qe||$e(!0)},onFocus:()=>{$e(!0),Ze(``)},placeholder:n(`smartPlugs.addSmartPlug.placeholders.searchEnergySensors`),className:`w-full pl-9 pr-8 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`}),je&&!Qe&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>{Me(``),Ze(``)},className:`absolute right-2 top-1/2 -translate-y-1/2 p-1 hover:bg-bambu-dark-tertiary rounded`,children:(0,G.jsx)(td,{className:`w-4 h-4 text-bambu-gray hover:text-white`})})]}),Qe&&(0,G.jsxs)(`div`,{className:`absolute z-50 w-full mt-1 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg shadow-lg max-h-48 overflow-y-auto`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>{Me(``),$e(!1),Ze(``)},className:`w-full px-3 py-2 text-left text-sm text-bambu-gray hover:bg-bambu-dark-tertiary`,children:n(`smartPlugs.none`)}),t.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{Me(e.entity_id),$e(!1),Ze(``)},className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary ${e.entity_id===je?`bg-bambu-green/20 text-bambu-green`:`text-white`}`,children:[(0,G.jsx)(`div`,{className:`font-medium`,children:e.friendly_name}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray`,children:[e.entity_id,` • `,e.state,` `,e.unit_of_measurement]})]},e.entity_id)),t.length===0&&(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:n(`smartPlugs.noMatchingSensors`)})]})]})})()]})]})]}),a===`mqtt`&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[!Pt?.mqtt_broker&&(0,G.jsxs)(`div`,{className:`p-3 bg-yellow-100 dark:bg-yellow-500/20 border border-yellow-400 dark:border-yellow-500/50 rounded-lg text-sm text-yellow-700 dark:text-yellow-400`,children:[n(`smartPlugs.mqttNotConfigured`),` `,(0,G.jsx)(`span`,{className:`font-medium`,children:n(`smartPlugs.mqttSettingsPath`)}),` `,n(`smartPlugs.mqttNotConfiguredSuffix`)]}),Pt?.mqtt_broker&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`p-3 bg-blue-50 dark:bg-blue-500/10 border border-blue-300 dark:border-blue-500/30 rounded-lg text-sm text-blue-700 dark:text-blue-300`,children:[(0,G.jsx)(`p`,{className:`font-medium mb-1`,children:n(`smartPlugs.monitorOnly`)}),(0,G.jsx)(`p`,{className:`text-xs opacity-80`,children:n(`smartPlugs.mqttMonitorOnlyDescription`)})]}),(0,G.jsxs)(`div`,{className:`space-y-3 p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium text-sm`,children:n(`smartPlugs.powerMonitoring`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.topic`)}),(0,G.jsx)(`input`,{type:`text`,value:_,onChange:e=>v(e.target.value),placeholder:`zigbee2mqtt/shelly-working-room`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.jsonPath`)}),(0,G.jsx)(`input`,{type:`text`,value:b,onChange:e=>x(e.target.value),placeholder:`power_l1`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.multiplier`)}),(0,G.jsx)(`input`,{type:`text`,value:S,onChange:e=>C(e.target.value),placeholder:`1`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,style:{whiteSpace:`pre-line`},children:n(`smartPlugs.mqttPowerHint`)})]}),(0,G.jsxs)(`div`,{className:`space-y-3 p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`p`,{className:`text-white font-medium text-sm`,children:[n(`smartPlugs.energyMonitoring`),` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,n(`smartPlugs.optional`),`)`]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.topic`)}),(0,G.jsx)(`input`,{type:`text`,value:w,onChange:e=>T(e.target.value),placeholder:`Same as power topic, or different`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.jsonPath`)}),(0,G.jsx)(`input`,{type:`text`,value:E,onChange:e=>D(e.target.value),placeholder:`energy_l1`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.multiplier`)}),(0,G.jsx)(`input`,{type:`text`,value:O,onChange:e=>k(e.target.value),placeholder:`1`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,style:{whiteSpace:`pre-line`},children:n(`smartPlugs.mqttEnergyHint`)})]}),(0,G.jsxs)(`div`,{className:`space-y-3 p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`p`,{className:`text-white font-medium text-sm`,children:[n(`smartPlugs.stateMonitoring`),` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,n(`smartPlugs.optional`),`)`]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.topic`)}),(0,G.jsx)(`input`,{type:`text`,value:A,onChange:e=>j(e.target.value),placeholder:`Same as power topic, or different`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.jsonPath`)}),(0,G.jsx)(`input`,{type:`text`,value:M,onChange:e=>N(e.target.value),placeholder:`state_l1`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.onValue`)}),(0,G.jsx)(`input`,{type:`text`,value:P,onChange:e=>F(e.target.value),placeholder:n(`smartPlugs.addSmartPlug.placeholders.mqttStateOnValue`),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,style:{whiteSpace:`pre-line`},children:n(`smartPlugs.mqttStateHint`)})]})]})]}),a===`rest`&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`space-y-3 p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium text-sm`,children:n(`smartPlugs.restControl`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restMethod`)}),(0,G.jsxs)(`select`,{value:ne,onChange:e=>re(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`GET`,children:`GET`}),(0,G.jsx)(`option`,{value:`POST`,children:`POST`}),(0,G.jsx)(`option`,{value:`PUT`,children:`PUT`}),(0,G.jsx)(`option`,{value:`PATCH`,children:`PATCH`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restOnUrl`)}),(0,G.jsx)(`input`,{type:`text`,value:I,onChange:e=>{L(e.target.value),ot(null)},placeholder:`http://openhab:8080/rest/items/MyPlug`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[n(`smartPlugs.restOnBody`),` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,n(`smartPlugs.optional`),`)`]})]}),(0,G.jsx)(`input`,{type:`text`,value:R,onChange:e=>z(e.target.value),placeholder:n(`smartPlugs.restBodyHint`),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restOffUrl`)}),(0,G.jsx)(`input`,{type:`text`,value:B,onChange:e=>{V(e.target.value),ot(null)},placeholder:`http://openhab:8080/rest/items/MyPlug`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[n(`smartPlugs.restOffBody`),` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,n(`smartPlugs.optional`),`)`]})]}),(0,G.jsx)(`input`,{type:`text`,value:ee,onChange:e=>te(e.target.value),placeholder:n(`smartPlugs.restBodyHint`),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsxs)(`div`,{className:`space-y-3 p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`p`,{className:`text-white font-medium text-sm`,children:[n(`smartPlugs.restHeaders`),` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,n(`smartPlugs.optional`),`)`]})]}),(0,G.jsx)(`div`,{children:(0,G.jsx)(`textarea`,{value:ie,onChange:e=>ae(e.target.value),placeholder:n(`smartPlugs.restHeadersHint`),rows:2,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none font-mono text-sm`})})]}),(0,G.jsxs)(`div`,{className:`space-y-3 p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`p`,{className:`text-white font-medium text-sm`,children:[n(`smartPlugs.stateMonitoring`),` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,n(`smartPlugs.optional`),`)`]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restStatusUrl`)}),(0,G.jsx)(`input`,{type:`text`,value:oe,onChange:e=>se(e.target.value),placeholder:n(`smartPlugs.restStatusHint`),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restStatusPath`)}),(0,G.jsx)(`input`,{type:`text`,value:H,onChange:e=>ce(e.target.value),placeholder:n(`smartPlugs.restPathHint`),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restStatusOnValue`)}),(0,G.jsx)(`input`,{type:`text`,value:le,onChange:e=>ue(e.target.value),placeholder:`ON`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]})]})]}),(0,G.jsxs)(`div`,{className:`space-y-3 p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`p`,{className:`text-white font-medium text-sm`,children:[n(`smartPlugs.energyMonitoring`),` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,n(`smartPlugs.optional`),`)`]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[n(`smartPlugs.restPowerUrl`),` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,n(`smartPlugs.optional`),`)`]})]}),(0,G.jsx)(`input`,{type:`text`,value:de,onChange:e=>fe(e.target.value),placeholder:n(`smartPlugs.restPowerUrlHint`),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restPowerPath`)}),(0,G.jsx)(`input`,{type:`text`,value:pe,onChange:e=>me(e.target.value),placeholder:n(`smartPlugs.restPathHint`),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restPowerMultiplier`)}),(0,G.jsx)(`input`,{type:`text`,value:he,onChange:e=>ge(e.target.value),placeholder:`1`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[n(`smartPlugs.restEnergyUrl`),` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,n(`smartPlugs.optional`),`)`]})]}),(0,G.jsx)(`input`,{type:`text`,value:_e,onChange:e=>ve(e.target.value),placeholder:n(`smartPlugs.restEnergyUrlHint`),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restEnergyPath`)}),(0,G.jsx)(`input`,{type:`text`,value:ye,onChange:e=>be(e.target.value),placeholder:n(`smartPlugs.restPathHint`),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restEnergyMultiplier`)}),(0,G.jsx)(`input`,{type:`text`,value:xe,onChange:e=>Se(e.target.value),placeholder:`1`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.restEnergyHint`)}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restEnergyTotalPath`)}),(0,G.jsx)(`input`,{type:`text`,value:Ce,onChange:e=>we(e.target.value),placeholder:n(`smartPlugs.restEnergyTotalPathHint`),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restEnergyTotalMultiplier`)}),(0,G.jsx)(`input`,{type:`text`,value:Te,onChange:e=>Ee(e.target.value),placeholder:`1`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.restEnergyTotalHint`)})]}),(I.trim()||B.trim())&&(0,G.jsx)(`div`,{className:`flex gap-2`,children:(0,G.jsxs)(Q,{type:`button`,variant:`secondary`,onClick:async()=>{ot(null);try{let e=I.trim()||B.trim(),t=await Z.testRESTConnection(e,ne,ie.trim()||null);ot({success:t.success}),t.success||ct(t.error||n(`smartPlugs.addSmartPlug.connectionFailed`))}catch{ot({success:!1}),ct(n(`smartPlugs.addSmartPlug.connectionFailed`))}},className:`w-full`,children:[(0,G.jsx)(Zu,{className:`w-4 h-4`}),n(`smartPlugs.testConnection`)]})}),at&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm ${at.success?`text-green-700 dark:text-green-400`:`text-red-700 dark:text-red-400`}`,children:[at.success?(0,G.jsx)(xs,{className:`w-4 h-4`}):(0,G.jsx)(Xu,{className:`w-4 h-4`}),at.success?n(`smartPlugs.connectionSuccess`):n(`smartPlugs.addSmartPlug.connectionFailed`)]})]}),a===`tasmota`&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.ipAddress`)}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`input`,{type:`text`,value:l,onChange:e=>{u(e.target.value),ot(null)},placeholder:`192.168.1.100`,className:`flex-1 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsxs)(Q,{type:`button`,variant:`secondary`,onClick:()=>Ut.mutate(),disabled:!l.trim()||Ut.isPending,children:[Ut.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Zu,{className:`w-4 h-4`}),n(`smartPlugs.test`)]})]})]}),a===`tasmota`&&at&&(0,G.jsx)(`div`,{className:`p-3 rounded-lg flex items-center gap-2 ${at.success?`bg-bambu-green/20 border border-bambu-green/50 text-bambu-green`:`bg-red-100 dark:bg-red-500/20 border border-red-400 dark:border-red-500/50 text-red-700 dark:text-red-400`}`,children:at.success?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(xs,{className:`w-5 h-5`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`font-medium`,children:n(`smartPlugs.connectedResult`)}),(0,G.jsxs)(`p`,{className:`text-sm opacity-80`,children:[at.device_name&&n(`smartPlugs.deviceLabel`,{name:at.device_name}),n(`smartPlugs.stateLabel`,{state:at.state})]})]})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Xu,{className:`w-5 h-5`}),(0,G.jsx)(`span`,{children:n(`smartPlugs.addSmartPlug.connectionFailed`)})]})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.nameLabel`)}),(0,G.jsx)(`input`,{type:`text`,value:s,onChange:e=>c(e.target.value),placeholder:n(`smartPlugs.addSmartPlug.placeholders.plugName`),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),a===`tasmota`&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.username`)}),(0,G.jsx)(`input`,{type:`text`,value:d,onChange:e=>f(e.target.value),placeholder:`admin`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.password`)}),(0,G.jsx)(`input`,{type:`password`,value:p,onChange:e=>m(e.target.value),placeholder:`********`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray -mt-2`,children:n(`smartPlugs.authHint`)})]}),a!==`mqtt`&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.linkToPrinter`)}),(0,G.jsxs)(`select`,{value:tt??``,onChange:e=>nt(e.target.value?Number(e.target.value):null),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:``,children:n(`smartPlugs.noPrinter`)}),Kt?.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(`smartPlugs.linkingDescription`)}),tt!==null&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between mt-3`,children:[(0,G.jsxs)(`div`,{className:`pr-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`smartPlugs.controlsPrinterPower`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.controlsPrinterPowerDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer shrink-0`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:rt,onChange:e=>it(e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]})]}),(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary pt-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(qo,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:n(`smartPlugs.powerAlerts`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:lt,onChange:e=>ut(e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),lt&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.alertAbove`)}),(0,G.jsx)(`input`,{type:`number`,value:dt,onChange:e=>ft(e.target.value),placeholder:`e.g. 200`,min:`0`,max:`5000`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.alertBelow`)}),(0,G.jsx)(`input`,{type:`number`,value:pt,onChange:e=>mt(e.target.value),placeholder:`e.g. 10`,min:`0`,max:`5000`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.alertDescription`)})]})]}),a!==`mqtt`&&(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary pt-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(js,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:n(`smartPlugs.dailySchedule`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:ht,onChange:e=>gt(e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),ht&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.turnOnAt`)}),(0,G.jsx)(`input`,{type:`time`,value:_t,onChange:e=>vt(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.turnOffAt`)}),(0,G.jsx)(`input`,{type:`time`,value:yt,onChange:e=>bt(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.scheduleDescription`)})]})]}),(0,G.jsx)(`div`,{className:`border-t border-bambu-dark-tertiary pt-4`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Jc,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white font-medium`,children:n(`smartPlugs.showInSwitchbar`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.quickAccessSidebar`)})]})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:xt,onChange:e=>St(e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]})}),a===`homeassistant`&&(0,G.jsx)(`div`,{className:`border-t border-bambu-dark-tertiary pt-4`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(ic,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white font-medium`,children:n(`smartPlugs.showOnPrinterCard`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.displayOnPrinterCard`)})]})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ct,onChange:e=>wt(e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]})}),(0,G.jsxs)(`div`,{className:`flex gap-3 pt-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:t,className:`flex-1`,children:n(`smartPlugs.cancel`)}),(0,G.jsxs)(Q,{type:`submit`,disabled:Jt,className:`flex-1`,children:[Jt?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Kl,{className:`w-4 h-4`}),n(i?`smartPlugs.save`:`smartPlugs.add`)]})]})]})]})})}function YUe({sensor:e,printers:t,onClose:n}){let{t:r}=U(),i=co(),{showToast:a}=Gd(),o=!!e,[s,c]=(0,y.useState)(e?.printer_id??t[0]?.id??``),[l,u]=(0,y.useState)(e?.entity_id??``),[d,f]=(0,y.useState)(e?.kind??`binary`),[p,m]=(0,y.useState)(e?.device_class??null),[h,g]=(0,y.useState)(e?.unit??null),[_,v]=(0,y.useState)(e?.name??``),[b,x]=(0,y.useState)(e?.alert_state??``),[S,C]=(0,y.useState)(e?.alert_above?.toString()??``),[w,T]=(0,y.useState)(e?.alert_below?.toString()??``),[E,D]=(0,y.useState)(e?.show_on_printer_card??!0),[O,k]=(0,y.useState)(e?.notify_on_alert??!1),[A,j]=(0,y.useState)(e?.block_print??!1),[M,N]=(0,y.useState)(``),[P,F]=(0,y.useState)(null);(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&n()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[n]);let{data:I}=K({queryKey:[`settings`],queryFn:Z.getSettings}),L=!!(I?.ha_enabled&&I?.ha_url&&I?.ha_token),{data:R,isLoading:z,error:B}=K({queryKey:[`bindableHAEntities`],queryFn:()=>Z.getBindableHAEntities(),enabled:L}),V=(0,y.useMemo)(()=>{let e=M.trim().toLowerCase(),t=R??[];return e?t.filter(t=>t.entity_id.toLowerCase().includes(e)||t.friendly_name.toLowerCase().includes(e)):t},[R,M]),ee=e=>{u(e.entity_id),m(e.device_class),g(e.unit_of_measurement);let t=e.domain===`binary_sensor`?`binary`:`numeric`;f(t),t===`numeric`?x(``):(C(``),T(``)),_.trim()||v(e.friendly_name.slice(0,100))},te=()=>{i.invalidateQueries({queryKey:[`haSensors`]}),i.invalidateQueries({queryKey:[`haSensorReadings`]})},ne=q({mutationFn:()=>{let t={name:_.trim(),entity_id:l,kind:d,device_class:p,unit:h,alert_state:d===`binary`&&b?b:null,alert_above:d===`numeric`&&S!==``?Number(S):null,alert_below:d===`numeric`&&w!==``?Number(w):null,block_print:A,notify_on_alert:O,show_on_printer_card:E};return o?Z.updateHASensor(e.id,t):Z.createHASensor({...t,printer_id:Number(s)})},onSuccess:()=>{te(),a(r(o?`haSensors.toast.updated`:`haSensors.toast.created`),`success`),n()},onError:e=>F(e.message)}),re=q({mutationFn:()=>Z.deleteHASensor(e.id),onSuccess:()=>{te(),a(r(`haSensors.toast.deleted`),`success`),n()},onError:e=>F(e.message)}),ie=d===`binary`?b!==``:S!==``||w!==``,ae=e=>{if(e.preventDefault(),F(null),!l)return F(r(`haSensors.error.pickEntity`));if(!_.trim())return F(r(`haSensors.error.nameRequired`));if(s===``)return F(r(`haSensors.error.printerRequired`));if((A||O)&&!ie)return F(r(`haSensors.error.alertRequired`));ne.mutate()},oe=RT[p??``],se=e=>{let t=oe?.[e]??e;return r(`haSensors.states.${t}`,{defaultValue:t})},H=ne.isPending||re.isPending;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:n,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-lg max-h-[90vh] overflow-y-auto`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-full bg-bambu-green/20 text-bambu-green`,children:(0,G.jsx)(wc,{className:`w-5 h-5`})}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:r(o?`haSensors.editTitle`:`haSensors.addTitle`)})]}),(0,G.jsx)(`button`,{onClick:n,className:`text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`form`,{onSubmit:ae,className:`p-6 space-y-4`,children:[P&&(0,G.jsx)(`div`,{className:`p-3 bg-red-100 dark:bg-red-500/20 border border-red-300 dark:border-red-500/50 rounded-lg text-sm text-red-700 dark:text-red-400`,children:P}),!o&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`haSensors.printer`)}),(0,G.jsx)(`select`,{value:s,onChange:e=>c(e.target.value===``?``:Number(e.target.value)),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`,children:t.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))})]}),!L&&(0,G.jsxs)(`div`,{className:`p-3 bg-yellow-100 dark:bg-yellow-500/20 border border-yellow-400 dark:border-yellow-500/50 rounded-lg text-sm text-yellow-700 dark:text-yellow-400`,children:[r(`smartPlugs.haNotConfigured`),` `,(0,G.jsx)(`span`,{className:`font-medium`,children:r(`smartPlugs.haSettingsPath`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1 ${L?``:`opacity-50`}`,children:r(`haSensors.entity`)}),B&&(0,G.jsx)(`div`,{className:`p-3 mb-2 bg-red-100 dark:bg-red-500/20 rounded-lg text-sm text-red-700 dark:text-red-400`,children:B.message}),(0,G.jsxs)(`div`,{className:`relative mb-2`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:M,onChange:e=>N(e.target.value),placeholder:r(`haSensors.searchPlaceholder`),disabled:!L,className:`w-full pl-9 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white disabled:opacity-50 disabled:cursor-not-allowed`})]}),(0,G.jsxs)(`div`,{className:`max-h-44 overflow-y-auto rounded-lg border border-bambu-dark-tertiary ${L?``:`opacity-50`}`,children:[!L&&(0,G.jsx)(`div`,{className:`p-3 text-sm text-bambu-gray`,children:r(`haSensors.noEntities`)}),L&&z&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 p-3 text-sm text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),r(`common.loading`)]}),L&&!z&&V.length===0&&(0,G.jsx)(`div`,{className:`p-3 text-sm text-bambu-gray`,children:r(`haSensors.noEntities`)}),L&&!z&&V.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>ee(e),className:`w-full text-left px-3 py-2 text-sm transition-colors ${e.entity_id===l?`bg-bambu-green/20 text-bambu-green`:`text-white hover:bg-bambu-dark`}`,children:[(0,G.jsx)(`div`,{className:`font-medium`,children:e.friendly_name}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray`,children:[e.entity_id,e.state!==null&&` — ${e.state}`,e.unit_of_measurement?` ${e.unit_of_measurement}`:``]})]},e.entity_id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`haSensors.name`)}),(0,G.jsx)(`input`,{type:`text`,value:_,onChange:e=>v(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`haSensors.alertWhen`)}),d===`binary`?(0,G.jsxs)(`select`,{value:b,onChange:e=>x(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`,children:[(0,G.jsx)(`option`,{value:``,children:r(`haSensors.alertNever`)}),(0,G.jsx)(`option`,{value:`on`,children:se(`on`)}),(0,G.jsx)(`option`,{value:`off`,children:se(`off`)})]}):(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`span`,{className:`block text-xs text-bambu-gray mb-1`,children:[r(`haSensors.alertAbove`),` `,h??``]}),(0,G.jsx)(`input`,{type:`number`,step:`any`,value:S,onChange:e=>C(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`span`,{className:`block text-xs text-bambu-gray mb-1`,children:[r(`haSensors.alertBelow`),` `,h??``]}),(0,G.jsx)(`input`,{type:`number`,step:`any`,value:w,onChange:e=>T(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`})]})]}),(0,G.jsx)(`p`,{className:`mt-1 text-xs text-bambu-gray`,children:r(`haSensors.alertHint`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:E,onChange:e=>D(e.target.checked),className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:r(`haSensors.showOnCard`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:O,onChange:e=>k(e.target.checked),disabled:!ie,className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-sm ${ie?`text-white`:`text-bambu-gray`}`,children:r(`haSensors.notifyOnAlert`)})]}),(0,G.jsxs)(`label`,{className:`flex items-start gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A,onChange:e=>j(e.target.checked),disabled:!ie,className:`w-4 h-4 mt-0.5`}),(0,G.jsxs)(`span`,{children:[(0,G.jsx)(`span`,{className:`block text-sm ${ie?`text-white`:`text-bambu-gray`}`,children:r(`haSensors.blockPrint`)}),(0,G.jsx)(`span`,{className:`block text-xs text-bambu-gray`,children:r(`haSensors.blockPrintHint`)})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between pt-2`,children:[o?(0,G.jsx)(Q,{type:`button`,variant:`danger`,onClick:()=>re.mutate(),disabled:H,children:r(`common.delete`)}):(0,G.jsx)(`span`,{}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:n,disabled:H,children:r(`common.cancel`)}),(0,G.jsxs)(Q,{type:`submit`,disabled:H||!L&&!o,children:[H?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Kl,{className:`w-4 h-4`}),r(`common.save`)]})]})]})]})]})})}function XUe({open:e,onClose:t,onPickLocation:n,startCreating:r}){let{t:i}=U(),a=co(),{showToast:o}=Gd(),[s,c]=(0,y.useState)(!1),[l,u]=(0,y.useState)(null),[d,f]=(0,y.useState)(``),[p,m]=(0,y.useState)(null),{data:h=[],isLoading:g}=K({queryKey:S8,queryFn:Z.getLocations,enabled:e}),{data:_=[]}=K({queryKey:[`locationHaSensors`],queryFn:()=>Z.getLocationHASensors(),enabled:e}),v=_.reduce((e,t)=>(e[t.location_id]=(e[t.location_id]??0)+1,e),{}),b=()=>{C8(a),a.invalidateQueries({queryKey:[`inventory-spools`]}),a.invalidateQueries({queryKey:[`spoolman-inventory-spools`]}),a.invalidateQueries({queryKey:[`locationHaSensors`]}),a.invalidateQueries({queryKey:[`locationHaSensorReadings`]})},x=q({mutationFn:async()=>{let e=d.trim();if(!e)throw Error(i(`locations.nameRequired`));return l?Z.updateLocation(l.id,{name:e}):Z.createLocation({name:e})},onSuccess:e=>{if(o(i(l?`locations.updated`:`locations.created`),`success`),b(),!l&&r){n?.(e.id),t();return}c(!1),u(null),f(``)},onError:e=>{o(e.message||i(`locations.saveFailed`),`error`)}}),S=q({mutationFn:e=>Z.deleteLocation(e),onSuccess:()=>{o(i(`locations.deleted`),`success`),m(null),b()},onError:e=>{o(e.message||i(`locations.deleteFailed`),`error`)}}),C=()=>{u(null),f(``),c(!0)};(0,y.useEffect)(()=>{e&&r&&(u(null),f(``),c(!0))},[e,r]);let w=e=>{u(e),f(e.name),c(!0)},T=(0,y.useCallback)(()=>{if(!x.isPending){if(r){t();return}c(!1),u(null),f(``)}},[x.isPending,r,t]);(0,y.useEffect)(()=>{if(!e)return;let n=e=>{e.key===`Escape`&&(x.isPending||S.isPending||(s?T():p||t()))};return document.addEventListener(`keydown`,n),()=>document.removeEventListener(`keydown`,n)},[e,s,p,x.isPending,S.isPending,T,t]);let E=e=>{e.preventDefault(),x.mutate()};if(!e)return null;let D=`locations-modal-title`,O=`location-editor-title`,k=(0,G.jsxs)(`form`,{onSubmit:E,children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,htmlFor:`location-name`,children:i(`locations.name`)}),(0,G.jsx)(`input`,{id:`location-name`,type:`text`,maxLength:255,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green mb-4`,placeholder:i(`locations.createPlaceholder`),value:d,onChange:e=>f(e.target.value),autoFocus:!0}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:T,children:i(`common.cancel`)}),(0,G.jsxs)(Q,{type:`submit`,disabled:x.isPending||!d.trim(),children:[x.isPending&&(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),i(`common.save`)]})]})]});return r?s?(0,G.jsxs)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60`,onClick:T}),(0,G.jsxs)(`div`,{className:`relative w-full max-w-md mx-4 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl p-6 shadow-2xl`,role:`dialog`,"aria-modal":`true`,"aria-labelledby":O,children:[(0,G.jsx)(`h3`,{id:O,className:`text-lg font-semibold text-white mb-4`,children:i(`locations.add`)}),k]})]}):null:(0,G.jsxs)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60`,onClick:()=>{x.isPending||S.isPending||t()}}),(0,G.jsxs)(`div`,{className:`relative w-full max-w-2xl mx-4 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-2xl max-h-[90vh] flex flex-col`,role:`dialog`,"aria-modal":`true`,"aria-labelledby":D,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-4 px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h2`,{id:D,className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(al,{className:`w-5 h-5 text-bambu-green`}),i(`locations.title`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm mt-0.5`,children:i(`locations.subtitle`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(Q,{onClick:C,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`locations.add`)]}),(0,G.jsx)(`button`,{type:`button`,className:`p-1.5 text-bambu-gray hover:text-white rounded`,onClick:t,"aria-label":i(`common.close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})})]})]}),(0,G.jsx)(`div`,{className:`overflow-y-auto`,children:g?(0,G.jsxs)(`div`,{className:`flex items-center justify-center py-16 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin mr-2`}),i(`common.loading`)]}):h.length===0?(0,G.jsx)(`div`,{className:`py-16 text-center text-bambu-gray`,children:i(`locations.empty`)}):(0,G.jsxs)(`table`,{className:`w-full text-sm table-fixed`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary text-left text-bambu-gray`,children:[(0,G.jsx)(`th`,{className:`px-4 py-3 font-medium`,children:i(`locations.name`)}),(0,G.jsx)(`th`,{className:`px-2 py-3 font-medium text-right w-24`,children:i(`locations.sensors`)}),(0,G.jsx)(`th`,{className:`pl-[28px] pr-4 py-3 font-medium text-right w-28`,children:i(`locations.spools`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 font-medium text-right w-32`,children:i(`common.actions`)})]})}),(0,G.jsx)(`tbody`,{children:h.map(e=>(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/60 hover:bg-bambu-dark-tertiary/30 cursor-pointer`,onClick:()=>{n&&(n(e.id),t())},children:[(0,G.jsx)(`td`,{className:`px-4 py-3 text-white font-medium truncate`,children:e.name}),(0,G.jsx)(`td`,{className:`px-2 py-3 text-right text-bambu-gray`,children:v[e.id]??0}),(0,G.jsx)(`td`,{className:`pl-[28px] pr-4 py-3 text-right text-bambu-gray`,children:e.spool_count}),(0,G.jsx)(`td`,{className:`px-4 py-3 text-right`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-1`,children:[(0,G.jsx)(`button`,{type:`button`,className:`p-1.5 text-bambu-gray hover:text-bambu-green rounded`,onClick:()=>w(e),title:i(`common.edit`),"aria-label":i(`locations.editAria`,{name:e.name,defaultValue:`Edit ${e.name}`}),children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{type:`button`,className:`p-1.5 text-bambu-gray hover:text-red-600 dark:hover:text-red-400 rounded disabled:opacity-40`,disabled:e.spool_count>0,onClick:()=>m(e),title:e.spool_count>0?i(`locations.deleteBlocked`):i(`common.delete`),"aria-label":i(`locations.deleteAria`,{name:e.name,defaultValue:`Delete ${e.name}`}),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})})]},e.id))})]})})]}),s&&(0,G.jsxs)(`div`,{className:`fixed inset-0 z-[60] flex items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60`,onClick:T}),(0,G.jsxs)(`div`,{className:`relative w-full max-w-md mx-4 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl p-6 shadow-2xl`,role:`dialog`,"aria-modal":`true`,"aria-labelledby":O,children:[(0,G.jsx)(`h3`,{id:O,className:`text-lg font-semibold text-white mb-4`,children:i(l?`locations.edit`:`locations.add`)}),k]})]}),p&&(0,G.jsx)(rf,{title:i(`locations.confirmDelete`,{name:p.name}),message:v[p.id]?i(`locations.confirmDeleteMessageWithSensors`):i(`locations.confirmDeleteMessage`),confirmText:i(`common.delete`),variant:`danger`,isLoading:S.isPending,onConfirm:()=>S.mutate(p.id),onCancel:()=>m(null)})]})}function U8(e){return e===`temperature`?`temperature`:e===`humidity`?`humidity`:e===`battery`?`battery`:null}var W8={temperature:`temperature`,humidity:`humidity`,battery:`battery`};function ZUe(e,t,n){let r=W8[t];if(!e.toLowerCase().endsWith(r))return[];let i=e.slice(0,e.length-r.length),a=[];return Object.keys(W8).forEach(e=>{if(e===t)return;let r=`${i}${W8[e]}`.toLowerCase(),o=n.find(e=>e.entity_id.toLowerCase()===r);o&&a.push(o)}),a}function QUe({sensor:e,locations:t,onClose:n}){let{t:r}=U(),i=co(),{showToast:a}=Gd(),o=!!e,[s,c]=(0,y.useState)(e?.location_id??t[0]?.id??``),[l,u]=(0,y.useState)(e?.entity_id??``),[d,f]=(0,y.useState)(e?.kind??`numeric`),[p,m]=(0,y.useState)(e?.device_class??null),[h,g]=(0,y.useState)(e?.unit??null),[_,v]=(0,y.useState)(e?.name??``),b=(0,y.useRef)(e?.name??``),[x,S]=(0,y.useState)(e?.alert_state??``),[C,w]=(0,y.useState)(e?.alert_above?.toString()??``),[T,E]=(0,y.useState)(e?.alert_below?.toString()??``),[D,O]=(0,y.useState)(e?.notify_on_alert??!1),[k,A]=(0,y.useState)(e?.show_on_card??!0),[j,M]=(0,y.useState)(``),[N,P]=(0,y.useState)(null),[F,I]=(0,y.useState)(!1),[L,R]=(0,y.useState)(!1),[z,B]=(0,y.useState)(null),[V,ee]=(0,y.useState)(!1),[te,ne]=(0,y.useState)([]),[re,ie]=(0,y.useState)({}),{data:ae}=K({queryKey:[`settings`],queryFn:Z.getSettings}),oe=!!(ae?.ha_enabled&&ae?.ha_url&&ae?.ha_token),{data:se,isLoading:H,error:ce}=K({queryKey:[`bindableLocationHAEntities`],queryFn:()=>Z.getBindableLocationHAEntities(),enabled:oe}),le=(0,y.useMemo)(()=>(se??[]).filter(e=>U8(e.device_class)!==null),[se]),{data:ue}=K({queryKey:[`locationHaSensors`],queryFn:()=>Z.getLocationHASensors()}),de=le.find(e=>e.entity_id===l),fe=(0,y.useMemo)(()=>{let e=j.trim().toLowerCase(),t=le??[],n=e?t.filter(t=>t.entity_id.toLowerCase().includes(e)||t.friendly_name.toLowerCase().includes(e)):t;return!de||n[0]?.entity_id===de.entity_id?n:[de,...n.filter(e=>e.entity_id!==de.entity_id)]},[le,j,de]),pe=e=>{u(e.entity_id),m(e.device_class),g(e.unit_of_measurement?.slice(0,16)??null);let t=e.domain===`binary_sensor`?`binary`:`numeric`;if(f(t),t===`numeric`?S(``):(w(``),E(``)),_===b.current){let t=e.friendly_name.slice(0,100);v(t),b.current=t}if(!o){let n=U8(e.device_class);if(n){let e=D8(ae?.location_sensor_alert_defaults)[n];t===`numeric`&&(w(n===`battery`?``:e.alertAbove),E(e.alertBelow)),O(e.notifyOnAlert),A(e.showOnCard)}}},me=()=>{i.invalidateQueries({queryKey:[`locationHaSensors`]}),i.invalidateQueries({queryKey:[`locationHaSensorReadings`]})},he=()=>({name:_.trim(),entity_id:l,kind:d,device_class:p,unit:h,alert_state:d===`binary`&&x?x:null,alert_above:d===`numeric`&&U8(p)!==`battery`&&C!==``?Number(C):null,alert_below:d===`numeric`&&T!==``?Number(T):null,notify_on_alert:D,show_on_card:k}),ge=q({mutationFn:()=>{let t=he();return o?Z.updateLocationHASensor(e.id,t):Z.createLocationHASensor({...t,location_id:Number(s)})},onSuccess:()=>{me(),a(r(o?`locationHaSensors.toast.updated`:`locationHaSensors.toast.created`),`success`),n()},onError:e=>P(e.message)}),_e=q({mutationFn:async()=>{let e=Number(s);await Z.createLocationHASensor({...he(),location_id:e});let t=D8(ae?.location_sensor_alert_defaults),n=te.filter(e=>re[e.entity_id]);for(let r of n){let n=U8(r.device_class),i=n?t[n]:null;await Z.createLocationHASensor({name:r.friendly_name.slice(0,100),entity_id:r.entity_id,kind:r.domain===`binary_sensor`?`binary`:`numeric`,device_class:r.device_class,unit:r.unit_of_measurement?.slice(0,16)??null,alert_state:null,alert_above:n!==`battery`&&i&&i.alertAbove!==``?Number(i.alertAbove):null,alert_below:i&&i.alertBelow!==``?Number(i.alertBelow):null,notify_on_alert:i?.notifyOnAlert??!1,show_on_card:i?.showOnCard??k,location_id:e})}return n},onSuccess:e=>{me(),ee(!1),e.length>0?a(r(`locationHaSensors.autoAdd.added`,{names:e.map(e=>e.entity_id).join(`, `)}),`success`):a(r(`locationHaSensors.toast.created`),`success`),n()},onError:e=>{me(),ee(!1),P(e.message)}}),ve=q({mutationFn:()=>Z.deleteLocationHASensor(e.id),onSuccess:()=>{me(),a(r(`locationHaSensors.toast.deleted`),`success`),n()},onError:e=>P(e.message)}),ye=q({mutationFn:()=>Z.updateLocationHASensor(z.id,he()),onSuccess:()=>{me(),R(!1),B(null),a(r(`locationHaSensors.toast.updated`),`success`),n()},onError:e=>{R(!1),B(null),P(e.message)}}),be=d===`binary`?x!==``:C!==``||T!==``,xe=e=>{if(e.preventDefault(),P(null),!l)return P(r(`haSensors.error.pickEntity`));if(!_.trim())return P(r(`haSensors.error.nameRequired`));if(s===``)return P(r(`locationHaSensors.error.locationRequired`));if(D&&!be)return P(r(`haSensors.error.alertRequired`));if(!o){let e=(ue??[]).filter(e=>e.location_id===Number(s)),t=U8(p);if(t){let n=e.find(e=>U8(e.device_class)===t);if(n){B(n),R(!0);return}}if(e.length===0&&t){let e=ZUe(l,t,le);if(e.length>0){ne(e),ie(Object.fromEntries(e.map(e=>[e.entity_id,!0]))),ee(!0);return}a(r(`locationHaSensors.autoAdd.noneFound`),`info`)}}ge.mutate()},Se=RT[p??``],Ce=e=>{let t=Se?.[e]??e;return r(`haSensors.states.${t}`,{defaultValue:t})},we=ge.isPending||ve.isPending||ye.isPending||_e.isPending,Te=t.find(e=>e.id===Number(s));return(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&!we&&n()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[n,we]),(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:()=>{we||n()},children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-lg max-h-[90vh] overflow-y-auto`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-full bg-bambu-green/20 text-bambu-green`,children:(0,G.jsx)(wc,{className:`w-5 h-5`})}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:r(o?`locationHaSensors.editTitle`:`locationHaSensors.addTitle`)})]}),(0,G.jsx)(`button`,{onClick:n,disabled:we,className:`text-bambu-gray hover:text-white transition-colors disabled:opacity-50 disabled:cursor-not-allowed`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`form`,{onSubmit:xe,className:`p-6 space-y-4`,children:[N&&(0,G.jsx)(`div`,{className:`p-3 bg-red-100 dark:bg-red-500/20 border border-red-300 dark:border-red-500/50 rounded-lg text-sm text-red-700 dark:text-red-400`,children:N}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`locationHaSensors.location`)}),o?(0,G.jsx)(`div`,{className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`,children:t.find(t=>t.id===e.location_id)?.name??r(`locationHaSensors.unknownLocation`)}):(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`select`,{value:s,onChange:e=>c(e.target.value===``?``:Number(e.target.value)),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`,children:t.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>I(!0),className:`p-2 rounded-lg bg-bambu-dark-tertiary hover:bg-bambu-gray-dark text-white transition-colors shrink-0`,title:r(`locations.add`),"aria-label":r(`locations.add`),children:(0,G.jsx)(Pl,{className:`w-4 h-4`})})]})]}),!oe&&(0,G.jsxs)(`div`,{className:`p-3 bg-yellow-100 dark:bg-yellow-500/20 border border-yellow-400 dark:border-yellow-500/50 rounded-lg text-sm text-yellow-700 dark:text-yellow-400`,children:[r(`smartPlugs.haNotConfigured`),` `,(0,G.jsx)(`span`,{className:`font-medium`,children:r(`smartPlugs.haSettingsPath`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1 ${oe?``:`opacity-50`}`,children:r(`haSensors.entity`)}),ce&&(0,G.jsx)(`div`,{className:`p-3 mb-2 bg-red-100 dark:bg-red-500/20 rounded-lg text-sm text-red-700 dark:text-red-400`,children:ce.message}),(0,G.jsxs)(`div`,{className:`relative mb-2`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:j,onChange:e=>M(e.target.value),placeholder:r(`haSensors.searchPlaceholder`),disabled:!oe,className:`w-full pl-9 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white disabled:opacity-50 disabled:cursor-not-allowed`})]}),(0,G.jsxs)(`div`,{className:`max-h-44 overflow-y-auto rounded-lg border border-bambu-dark-tertiary ${oe?``:`opacity-50`}`,children:[l&&!de&&(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm bg-bambu-green/10 text-bambu-green border-b border-bambu-dark-tertiary`,children:r(`locationHaSensors.currentlyBound`,{entity:l})}),!oe&&(0,G.jsx)(`div`,{className:`p-3 text-sm text-bambu-gray`,children:r(`haSensors.noEntities`)}),oe&&H&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 p-3 text-sm text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),r(`common.loading`)]}),oe&&!H&&fe.length===0&&(0,G.jsx)(`div`,{className:`p-3 text-sm text-bambu-gray`,children:r(`haSensors.noEntities`)}),oe&&!H&&fe.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>pe(e),className:`w-full text-left px-3 py-2 text-sm transition-colors ${e.entity_id===l?`bg-bambu-green/20 text-bambu-green`:`text-white hover:bg-bambu-dark`}`,children:[(0,G.jsx)(`div`,{className:`font-medium`,children:e.friendly_name}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray`,children:[e.entity_id,e.state!==null&&` — ${e.state}`,e.unit_of_measurement?` ${e.unit_of_measurement}`:``]})]},e.entity_id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,htmlFor:`location-ha-sensor-name`,children:r(`haSensors.name`)}),(0,G.jsx)(`input`,{id:`location-ha-sensor-name`,type:`text`,value:_,onChange:e=>v(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`})]}),l&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`haSensors.alertWhen`)}),d===`binary`?(0,G.jsxs)(`select`,{value:x,onChange:e=>S(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`,children:[(0,G.jsx)(`option`,{value:``,children:r(`haSensors.alertNever`)}),(0,G.jsx)(`option`,{value:`on`,children:Ce(`on`)}),(0,G.jsx)(`option`,{value:`off`,children:Ce(`off`)})]}):U8(p)===`battery`?(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`span`,{className:`block text-xs text-bambu-gray mb-1`,children:[r(`haSensors.alertBelow`),` `,h??``]}),(0,G.jsx)(`input`,{type:`number`,step:`any`,value:T,onChange:e=>E(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`})]}):(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`span`,{className:`block text-xs text-bambu-gray mb-1`,children:[r(`haSensors.alertAbove`),` `,h??``]}),(0,G.jsx)(`input`,{type:`number`,step:`any`,value:C,onChange:e=>w(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`span`,{className:`block text-xs text-bambu-gray mb-1`,children:[r(`haSensors.alertBelow`),` `,h??``]}),(0,G.jsx)(`input`,{type:`number`,step:`any`,value:T,onChange:e=>E(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`})]})]}),(0,G.jsx)(`p`,{className:`mt-1 text-xs text-bambu-gray`,children:r(`haSensors.alertHint`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:k,onChange:e=>A(e.target.checked),className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:r(`locationHaSensors.showOnCard`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:D,onChange:e=>O(e.target.checked),disabled:!be,className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-sm ${be?`text-white`:`text-bambu-gray`}`,children:r(`haSensors.notifyOnAlert`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between pt-2`,children:[o?(0,G.jsx)(Q,{type:`button`,variant:`danger`,onClick:()=>ve.mutate(),disabled:we,children:r(`common.delete`)}):(0,G.jsx)(`span`,{}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:n,disabled:we,children:r(`common.cancel`)}),(0,G.jsxs)(Q,{type:`submit`,disabled:we||!oe&&!o,children:[we?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Kl,{className:`w-4 h-4`}),r(`common.save`)]})]})]})]})]})}),L&&z&&(0,G.jsx)(rf,{title:r(`locationHaSensors.overwriteConfirm.title`),message:r(`locationHaSensors.overwriteConfirm.message${U8(z.device_class)===`humidity`?`Humidity`:U8(z.device_class)===`battery`?`Battery`:`Temperature`}`,{location:Te?.name??``,name:z.name}),variant:`warning`,overlayZIndex:`z-[110]`,isLoading:ye.isPending,onConfirm:()=>ye.mutate(),onCancel:()=>{R(!1),B(null)}}),V&&te.length>0&&(0,G.jsx)(rf,{title:r(`locationHaSensors.autoAdd.confirmTitle`),message:r(`locationHaSensors.autoAdd.confirmMessage`),overlayZIndex:`z-[110]`,isLoading:_e.isPending,confirmDisabled:!te.some(e=>re[e.entity_id]),onConfirm:()=>_e.mutate(),cancelText:r(`locationHaSensors.autoAdd.onlyThisOne`),onCancel:()=>{ee(!1),ne([]),ie({}),ge.mutate()},children:(0,G.jsx)(`div`,{className:`space-y-2`,children:te.map(e=>(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:re[e.entity_id]??!0,onChange:t=>ie(n=>({...n,[e.entity_id]:t.target.checked})),className:`w-4 h-4`}),(0,G.jsxs)(`span`,{className:`text-sm text-white`,children:[e.friendly_name,(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[` — `,e.entity_id]})]})]},e.entity_id))})}),F&&(0,G.jsx)(XUe,{open:F,onClose:()=>I(!1),onPickLocation:e=>{c(e),I(!1)},startCreating:!0})]})}var G8=60,$Ue=120,eWe={temperature:ju,humidity:Zs,battery:Wo},tWe={temperature:`°C`,humidity:`%`,battery:`%`};function nWe(e){return e===`temperature`?`temperature`:e===`humidity`?`humidity`:e===`battery`?`battery`:null}function K8({category:e,state:t,onChange:n}){let{t:r}=U(),i=eWe[e],a=tWe[e],o=t.alertAbove!==``||t.alertBelow!==``;return(0,G.jsxs)(`div`,{className:`p-3 border border-bambu-dark-tertiary rounded-lg space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-sm text-white font-medium`,children:[(0,G.jsx)(i,{className:`w-4 h-4`}),r(`inventory.${e}`)]}),e===`battery`?(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`span`,{className:`block text-xs text-bambu-gray mb-1`,children:[r(`haSensors.alertBelow`),` `,a]}),(0,G.jsx)(`input`,{type:`number`,step:`any`,value:t.alertBelow,onChange:e=>n({alertBelow:e.target.value}),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`})]}):(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`span`,{className:`block text-xs text-bambu-gray mb-1`,children:[r(`haSensors.alertAbove`),` `,a]}),(0,G.jsx)(`input`,{type:`number`,step:`any`,value:t.alertAbove,onChange:e=>n({alertAbove:e.target.value}),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`span`,{className:`block text-xs text-bambu-gray mb-1`,children:[r(`haSensors.alertBelow`),` `,a]}),(0,G.jsx)(`input`,{type:`number`,step:`any`,value:t.alertBelow,onChange:e=>n({alertBelow:e.target.value}),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:t.showOnCard,onChange:e=>n({showOnCard:e.target.checked}),className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:r(`locationHaSensors.showOnCard`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:t.notifyOnAlert,onChange:e=>n({notifyOnAlert:e.target.checked}),disabled:!o,className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-sm ${o?`text-white`:`text-bambu-gray`}`,children:r(`haSensors.notifyOnAlert`)})]})]})}function rWe({onClose:e}){let{t}=U(),{showToast:n}=Gd(),r=co(),[i,a]=(0,y.useState)(()=>D8()),[o,s]=(0,y.useState)(()=>k8()),[c,l]=(0,y.useState)(()=>R8()),[u,d]=(0,y.useState)(()=>vUe()),[f,p]=(0,y.useState)(()=>bUe()),[m,h]=(0,y.useState)(!1),{data:g}=K({queryKey:[`settings`],queryFn:Z.getSettings}),[_,v]=(0,y.useState)($Ue),b=(0,y.useRef)(!1),x=(0,y.useRef)(new Set);(0,y.useEffect)(()=>{if(!g||b.current)return;b.current=!0,x.current.has(`pollInterval`)||v(g.location_sensor_poll_interval);let e=D8(g.location_sensor_alert_defaults);a(t=>{let n={...e};return Object.keys(n).forEach(e=>{x.current.has(e)&&(n[e]=t[e])}),n})},[g]);let S=(e,t)=>{x.current.add(e),a(n=>({...n,[e]:{...n[e],...t}}))},C=e=>{x.current.add(`pollInterval`),v(e)},w=async()=>{let e=Math.max(G8,_),t=mUe({...i,battery:{...i.battery,alertAbove:``}}),n={};g&&e!==g.location_sensor_poll_interval&&(n.location_sensor_poll_interval=e),g&&t!==g.location_sensor_alert_defaults&&(n.location_sensor_alert_defaults=t),Object.keys(n).length>0&&(await Z.updateSettings(n),r.invalidateQueries({queryKey:[`settings`]})),hUe(i),gUe(o),_Ue(c),yUe(u),xUe(f)},T=q({mutationFn:w,onSuccess:()=>{n(t(`locationHaSensors.options.saved`),`success`),e()},onError:e=>{n(e.message||t(`locationHaSensors.options.saveFailed`),`error`)}}),E=e=>{e.preventDefault(),T.mutate()},D=q({mutationFn:async()=>{let[e,t]=await Promise.all([Z.getLocationHASensors(),Z.getBindableLocationHAEntities()]),n=new Map(t.map(e=>[e.entity_id,e.friendly_name])),r=e.filter(e=>nWe(e.device_class)!==null);return await Promise.all(r.map(e=>{let t=nWe(e.device_class),r=i[t],a=n.get(e.entity_id);return Z.updateLocationHASensor(e.id,{...a?{name:a.slice(0,100)}:{},alert_above:t!==`battery`&&r.alertAbove!==``?Number(r.alertAbove):null,alert_below:r.alertBelow===``?null:Number(r.alertBelow),notify_on_alert:r.notifyOnAlert,show_on_card:r.showOnCard})})),await w(),r.length},onSuccess:i=>{r.invalidateQueries({queryKey:[`locationHaSensors`]}),r.invalidateQueries({queryKey:[`locationHaSensorReadings`]}),n(t(`locationHaSensors.options.resetDone`,{count:i}),`success`),h(!1),e()},onError:e=>{n(e.message||t(`locationHaSensors.options.resetFailed`),`error`),h(!1)}});return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:e,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-lg max-h-[90vh] overflow-y-auto`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-full bg-bambu-green/20 text-bambu-green`,children:(0,G.jsx)(tu,{className:`w-5 h-5`})}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:t(`locationHaSensors.options.title`)})]}),(0,G.jsx)(`button`,{onClick:e,className:`text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`form`,{onSubmit:E,className:`px-6 pb-6 pt-3 space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:t(`locationHaSensors.options.description`)}),(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsx)(K8,{category:`temperature`,state:i.temperature,onChange:e=>S(`temperature`,e)}),(0,G.jsx)(K8,{category:`humidity`,state:i.humidity,onChange:e=>S(`humidity`,e)}),(0,G.jsx)(K8,{category:`battery`,state:i.battery,onChange:e=>S(`battery`,e)})]}),(0,G.jsxs)(`div`,{className:`p-3 border border-bambu-dark-tertiary rounded-lg space-y-3`,children:[(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:o,onChange:e=>s(e.target.checked),className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:t(`locationHaSensors.options.colorizeValues`)})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-3 gap-x-3 gap-y-1 items-end ${o?``:`opacity-50`}`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray`,htmlFor:`location-sensor-below-color`,children:t(`locationHaSensors.options.belowColor`)}),(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray`,htmlFor:`location-sensor-optimal-color`,children:t(`locationHaSensors.options.optimalColor`)}),(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray`,htmlFor:`location-sensor-above-color`,children:t(`locationHaSensors.options.aboveColor`)}),(0,G.jsx)(`select`,{id:`location-sensor-below-color`,value:u,onChange:e=>d(e.target.value),disabled:!o,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white disabled:cursor-not-allowed`,children:M8.map(e=>(0,G.jsx)(`option`,{value:e,children:t(`locationHaSensors.options.colors.${e}`)},e))}),(0,G.jsx)(`select`,{id:`location-sensor-optimal-color`,value:f,onChange:e=>p(e.target.value),disabled:!o,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white disabled:cursor-not-allowed`,children:M8.map(e=>(0,G.jsx)(`option`,{value:e,children:t(`locationHaSensors.options.colors.${e}`)},e))}),(0,G.jsx)(`select`,{id:`location-sensor-above-color`,value:c,onChange:e=>l(e.target.value),disabled:!o,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white disabled:cursor-not-allowed`,children:M8.map(e=>(0,G.jsx)(`option`,{value:e,children:t(`locationHaSensors.options.colors.${e}`)},e))})]})]}),(0,G.jsx)(`div`,{className:`pt-4 mt-4 border-t border-bambu-dark-tertiary`,children:(0,G.jsx)(`p`,{className:`text-xs font-medium text-bambu-gray uppercase tracking-wider mb-3`,children:t(`locationHaSensors.options.generalSettings`)})}),(0,G.jsxs)(`div`,{className:`p-3 border border-bambu-dark-tertiary rounded-lg space-y-2`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-white`,htmlFor:`location-sensor-poll-interval`,children:t(`locationHaSensors.options.pollInterval`)}),(0,G.jsx)(`input`,{id:`location-sensor-poll-interval`,type:`number`,min:G8,step:`1`,value:_,onChange:e=>C(Number(e.target.value)),onBlur:()=>C(Math.max(G8,_||$Ue)),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:t(`locationHaSensors.options.pollIntervalHint`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2 pt-2`,children:[(0,G.jsxs)(Q,{type:`button`,variant:`secondary`,onClick:()=>h(!0),children:[(0,G.jsx)(Ul,{className:`w-4 h-4`}),t(`locationHaSensors.options.reset`)]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:e,children:t(`common.cancel`)}),(0,G.jsxs)(Q,{type:`submit`,disabled:T.isPending,children:[(0,G.jsx)(Kl,{className:`w-4 h-4`}),t(`common.save`)]})]})]})]})]})}),m&&(0,G.jsx)(rf,{title:t(`locationHaSensors.options.resetConfirm.title`),message:t(`locationHaSensors.options.resetConfirm.message`),confirmText:t(`locationHaSensors.options.reset`),variant:`danger`,overlayZIndex:`z-[60]`,isLoading:D.isPending,onConfirm:()=>D.mutate(),onCancel:()=>h(!1)})]})}function iWe({provider:e,onEdit:t}){let{t:n}=U(),r=co(),[i,a]=(0,y.useState)(!1),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(null),{data:u}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),d=u?.find(t=>t.id===e.printer_id),f=q({mutationFn:t=>Z.updateNotificationProvider(e.id,t),onSuccess:()=>{r.invalidateQueries({queryKey:[`notification-providers`]})}}),p=q({mutationFn:()=>Z.deleteNotificationProvider(e.id),onSuccess:()=>{r.invalidateQueries({queryKey:[`notification-providers`]})}}),m=q({mutationFn:()=>Z.testNotificationProvider(e.id),onSuccess:e=>{l(e),r.invalidateQueries({queryKey:[`notification-providers`]})},onError:e=>{l({success:!1,message:e.message})}}),h=e=>e||``;return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ld,{className:`relative`,children:(0,G.jsxs)(zd,{className:`p-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between ${e.enabled?`mb-3`:`mb-0`}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg ${e.enabled?`bg-bambu-green/20`:`bg-bambu-dark`}`,children:(0,G.jsx)(qo,{className:`w-5 h-5 ${e.enabled?`text-bambu-green`:`text-bambu-gray`}`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`font-medium text-white`,children:e.name}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`notifications.providerTypes.${e.provider_type}`,e.provider_type)})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[e.last_success&&(0,G.jsx)(`span`,{className:`text-xs text-status-ok hidden sm:inline`,children:n(`notifications.lastSuccess`,{date:np(e.last_success)})}),e.last_error&&e.last_error_at&&(!e.last_success||(ep(e.last_error_at)?.getTime()||0)>(ep(e.last_success)?.getTime()||0))&&(0,G.jsx)(`span`,{className:`text-xs text-status-error`,title:e.last_error,children:n(`notifications.error`)}),(0,G.jsx)(hU,{checked:e.enabled,onChange:e=>f.mutate({enabled:e})})]})]}),e.enabled&&(0,G.jsxs)(G.Fragment,{children:[d&&(0,G.jsxs)(`div`,{className:`mb-3 px-2 py-1.5 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[n(`notifications.printer`),` `]}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:d.name})]}),!d&&!e.printer_id&&(0,G.jsx)(`div`,{className:`mb-3 px-2 py-1.5 bg-bambu-dark rounded-lg`,children:(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:n(`notifications.allPrinters`)})}),(0,G.jsxs)(`div`,{className:`mb-3 flex flex-wrap gap-1`,children:[e.on_print_start&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400 text-xs rounded`,children:n(`notifications.start`)}),e.on_plate_not_empty&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-rose-100 dark:bg-rose-600/20 text-rose-700 dark:text-rose-300 text-xs rounded`,children:n(`notifications.plateCheck`)}),e.on_print_complete&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-bambu-green/20 text-bambu-green text-xs rounded`,children:n(`notifications.complete`)}),e.on_plate_clear_required&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400 text-xs rounded`,children:n(`notifications.plateClear`)}),e.on_print_failed&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400 text-xs rounded`,children:n(`notifications.failed`)}),e.on_print_stopped&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-orange-100 dark:bg-orange-500/20 text-orange-700 dark:text-orange-400 text-xs rounded`,children:n(`notifications.stopped`)}),e.on_billing_charge_failed&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-red-100 dark:bg-red-600/20 text-red-700 dark:text-red-300 text-xs rounded`,children:n(`notifications.billingChargeFailedLabel`)}),e.on_print_progress&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400 text-xs rounded`,children:n(`notifications.progress`)}),e.on_printer_offline&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-gray-500/20 text-gray-400 text-xs rounded`,children:n(`notifications.offline`)}),e.on_printer_error&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-rose-100 dark:bg-rose-500/20 text-rose-700 dark:text-rose-400 text-xs rounded`,children:n(`notifications.error`)}),e.on_ai_failure_detection&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-fuchsia-100 dark:bg-fuchsia-500/20 text-fuchsia-700 dark:text-fuchsia-300 text-xs rounded`,children:n(`notifications.aiFailureDetection`)}),e.on_ha_sensor_alert&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-indigo-100 dark:bg-indigo-500/20 text-indigo-700 dark:text-indigo-300 text-xs rounded`,children:n(`notifications.haSensorAlert`)}),e.on_location_ha_sensor_alert&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-indigo-100 dark:bg-indigo-500/20 text-indigo-700 dark:text-indigo-300 text-xs rounded`,children:n(`notifications.locationHaSensorAlert`)}),e.on_filament_low&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-cyan-100 dark:bg-cyan-500/20 text-cyan-700 dark:text-cyan-400 text-xs rounded`,children:n(`notifications.lowFilament`)}),e.on_maintenance_due&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-400 text-xs rounded`,children:n(`notifications.maintenance`)}),e.on_ams_humidity_high&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-blue-100 dark:bg-blue-600/20 text-blue-700 dark:text-blue-300 text-xs rounded`,children:n(`notifications.amsHumidity`)}),e.on_ams_temperature_high&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-orange-100 dark:bg-orange-600/20 text-orange-700 dark:text-orange-300 text-xs rounded`,children:n(`notifications.amsTemp`)}),e.on_ams_drying_suspended&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-rose-100 dark:bg-rose-600/20 text-rose-700 dark:text-rose-300 text-xs rounded`,children:n(`notifications.amsDryingSuspended`)}),e.on_ams_ht_humidity_high&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-cyan-100 dark:bg-cyan-600/20 text-cyan-700 dark:text-cyan-300 text-xs rounded`,children:n(`notifications.amsHtHumidity`)}),e.on_ams_ht_temperature_high&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-amber-100 dark:bg-amber-600/20 text-amber-700 dark:text-amber-300 text-xs rounded`,children:n(`notifications.amsHtTemp`)}),e.on_bed_cooled&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-teal-100 dark:bg-teal-500/20 text-teal-700 dark:text-teal-400 text-xs rounded`,children:n(`notifications.bedCooled`)}),e.on_first_layer_complete&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-emerald-100 dark:bg-emerald-600/20 text-emerald-700 dark:text-emerald-300 text-xs rounded`,children:n(`notifications.firstLayer`)}),e.on_print_missing_spool_assignment&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-300 text-xs rounded`,children:n(`notifications.missingSpoolAssignmentLabel`)}),e.on_stock_reorder_alert&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-lime-100 dark:bg-lime-500/20 text-lime-700 dark:text-lime-400 text-xs rounded`,children:n(`notifications.stockReorderAlert`)}),e.on_stock_break_alert&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-red-100 dark:bg-red-600/20 text-red-700 dark:text-red-300 text-xs rounded`,children:n(`notifications.stockBreakAlert`)}),e.quiet_hours_enabled&&(0,G.jsxs)(`span`,{className:`px-2 py-0.5 bg-indigo-100 dark:bg-indigo-500/20 text-indigo-700 dark:text-indigo-400 text-xs rounded flex items-center gap-1`,children:[(0,G.jsx)(gl,{className:`w-3 h-3`}),n(`notifications.quiet`)]}),e.daily_digest_enabled&&(0,G.jsxs)(`span`,{className:`px-2 py-0.5 bg-emerald-100 dark:bg-emerald-500/20 text-emerald-700 dark:text-emerald-400 text-xs rounded flex items-center gap-1`,children:[(0,G.jsx)(as,{className:`w-3 h-3`}),n(`notifications.digest`,{time:e.daily_digest_time})]})]}),(0,G.jsx)(`div`,{className:`mb-3`,children:(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,disabled:m.isPending,onClick:()=>{l(null),m.mutate()},className:`w-full`,children:[m.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Ql,{className:`w-4 h-4`}),n(`notifications.sendTestNotification`)]})}),c&&(0,G.jsxs)(`div`,{className:`mb-3 p-2 rounded-lg flex items-center gap-2 text-sm ${c.success?`bg-bambu-green/20 text-bambu-green`:`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`}`,children:[c.success?(0,G.jsx)(xs,{className:`w-4 h-4`}):(0,G.jsx)(Ds,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:c.message})]})]}),(0,G.jsxs)(`button`,{onClick:()=>s(!o),className:`w-full flex items-center justify-between py-2 text-sm text-bambu-gray hover:text-white transition-colors ${e.enabled?`border-t border-bambu-dark-tertiary`:`mt-2 border-t border-bambu-dark-tertiary`}`,children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(tu,{className:`w-4 h-4`}),n(`notifications.eventSettings`)]}),o?(0,G.jsx)(gs,{className:`w-4 h-4`}):(0,G.jsx)(ps,{className:`w-4 h-4`})]}),o&&(0,G.jsxs)(`div`,{className:`pt-3 border-t border-bambu-dark-tertiary space-y-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.enabled`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.sendFromProvider`)})]}),(0,G.jsx)(hU,{checked:e.enabled,onChange:e=>f.mutate({enabled:e})})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase tracking-wide`,children:n(`notifications.printEvents`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.printStarted`)}),(0,G.jsx)(hU,{checked:e.on_print_start,onChange:e=>f.mutate({on_print_start:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.plateNotEmpty`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.plateNotEmptyDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_plate_not_empty??!0,onChange:e=>f.mutate({on_plate_not_empty:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.printCompleted`)}),(0,G.jsx)(hU,{checked:e.on_print_complete,onChange:e=>f.mutate({on_print_complete:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.plateClearRequired`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.plateClearRequiredDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_plate_clear_required??!1,onChange:e=>f.mutate({on_plate_clear_required:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.bedCooledLabel`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.bedCooledDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_bed_cooled??!1,onChange:e=>f.mutate({on_bed_cooled:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.firstLayerCompleteLabel`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.firstLayerCompleteDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_first_layer_complete??!1,onChange:e=>f.mutate({on_first_layer_complete:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.missingSpoolAssignmentLabel`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.missingSpoolAssignmentDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_print_missing_spool_assignment??!1,onChange:e=>f.mutate({on_print_missing_spool_assignment:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.printFailed`)}),(0,G.jsx)(hU,{checked:e.on_print_failed,onChange:e=>f.mutate({on_print_failed:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.printStopped`)}),(0,G.jsx)(hU,{checked:e.on_print_stopped,onChange:e=>f.mutate({on_print_stopped:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.billingChargeFailedLabel`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.billingChargeFailedDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_billing_charge_failed??!0,onChange:e=>f.mutate({on_billing_charge_failed:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.progressMilestones`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.progressMilestonesDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_print_progress,onChange:e=>f.mutate({on_print_progress:e})})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase tracking-wide`,children:n(`notifications.printerStatus`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.printerOffline`)}),(0,G.jsx)(hU,{checked:e.on_printer_offline,onChange:e=>f.mutate({on_printer_offline:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.printerError`)}),(0,G.jsx)(hU,{checked:e.on_printer_error,onChange:e=>f.mutate({on_printer_error:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.aiFailureDetection`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.aiFailureDetectionDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_ai_failure_detection??!1,onChange:e=>f.mutate({on_ai_failure_detection:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.haSensorAlert`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.haSensorAlertDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_ha_sensor_alert??!1,onChange:e=>f.mutate({on_ha_sensor_alert:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.locationHaSensorAlert`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.locationHaSensorAlertDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_location_ha_sensor_alert??!1,onChange:e=>f.mutate({on_location_ha_sensor_alert:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.lowFilamentLabel`)}),(0,G.jsx)(hU,{checked:e.on_filament_low,onChange:e=>f.mutate({on_filament_low:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.maintenanceDue`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.maintenanceDueDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_maintenance_due??!1,onChange:e=>f.mutate({on_maintenance_due:e})})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase tracking-wide`,children:n(`notifications.amsAlarms`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.amsHumidityHigh`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.amsHumidityHighDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_ams_humidity_high??!1,onChange:e=>f.mutate({on_ams_humidity_high:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.amsTemperatureHigh`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.amsTemperatureHighDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_ams_temperature_high??!1,onChange:e=>f.mutate({on_ams_temperature_high:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.amsDryingSuspendedTitle`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.amsDryingSuspendedDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_ams_drying_suspended??!1,onChange:e=>f.mutate({on_ams_drying_suspended:e})})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase tracking-wide`,children:n(`notifications.amsHtAlarms`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.amsHtHumidityHigh`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.amsHtHumidityHighDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_ams_ht_humidity_high??!1,onChange:e=>f.mutate({on_ams_ht_humidity_high:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.amsHtTemperatureHigh`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.amsHtTemperatureHighDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_ams_ht_temperature_high??!1,onChange:e=>f.mutate({on_ams_ht_temperature_high:e})})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase tracking-wide`,children:n(`notifications.inventoryAlerts`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.stockReorderAlert`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.stockReorderAlertDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_stock_reorder_alert??!1,onChange:e=>f.mutate({on_stock_reorder_alert:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.stockBreakAlert`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.stockBreakAlertDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_stock_break_alert??!1,onChange:e=>f.mutate({on_stock_break_alert:e})})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase tracking-wide`,children:n(`notifications.printQueue`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.jobAdded`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.jobAddedDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_queue_job_added??!1,onChange:e=>f.mutate({on_queue_job_added:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.jobAssigned`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.jobAssignedDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_queue_job_assigned??!1,onChange:e=>f.mutate({on_queue_job_assigned:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.jobStarted`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.jobStartedDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_queue_job_started??!1,onChange:e=>f.mutate({on_queue_job_started:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.jobWaiting`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.jobWaitingDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_queue_job_waiting??!0,onChange:e=>f.mutate({on_queue_job_waiting:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.jobSkipped`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.jobSkippedDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_queue_job_skipped??!0,onChange:e=>f.mutate({on_queue_job_skipped:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.jobFailed`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.jobFailedDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_queue_job_failed??!0,onChange:e=>f.mutate({on_queue_job_failed:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.queueComplete`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.queueCompleteDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_queue_completed??!1,onChange:e=>f.mutate({on_queue_completed:e})})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(gl,{className:`w-4 h-4 text-purple-600 dark:text-purple-400`}),(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.quietHours`)})]}),(0,G.jsx)(hU,{checked:e.quiet_hours_enabled,onChange:e=>f.mutate({quiet_hours_enabled:e})})]}),e.quiet_hours_enabled&&(0,G.jsxs)(`div`,{className:`pl-4 border-l-2 border-bambu-dark-tertiary space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.noNotificationsDuring`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(js,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsxs)(`span`,{className:`text-sm text-white`,children:[h(e.quiet_hours_start)||`22:00`,` - `,h(e.quiet_hours_end)||`07:00`]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.editProviderToChangeQuietHours`)})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(as,{className:`w-4 h-4 text-emerald-600 dark:text-emerald-400`}),(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.dailyDigest`)})]}),(0,G.jsx)(hU,{checked:e.daily_digest_enabled,onChange:e=>f.mutate({daily_digest_enabled:e})})]}),e.daily_digest_enabled&&(0,G.jsxs)(`div`,{className:`pl-4 border-l-2 border-bambu-dark-tertiary space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.batchNotifications`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(js,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.sendAt`,{time:h(e.daily_digest_time)||`08:00`})})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.editProviderToChangeDigestTime`)})]})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 pt-2`,children:[(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>t(e),className:`flex-1`,children:[(0,G.jsx)(Ol,{className:`w-4 h-4`}),n(`notifications.edit`)]}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>a(!0),className:`text-red-700 dark:text-red-400 hover:text-red-800 dark:hover:text-red-300`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})]})]})}),i&&(0,G.jsx)(rf,{title:n(`notifications.deleteProvider`),message:n(`notifications.deleteConfirm`,{name:e.name}),confirmText:n(`notifications.delete`),variant:`danger`,onConfirm:()=>{p.mutate(),a(!1)},onCancel:()=>a(!1)})]})}var aWe=[`email`,`telegram`,`discord`,`ntfy`,`pushover`,`bark`,`callmebot`,`webhook`,`homeassistant`];function oWe({provider:e,onClose:t}){let{t:n}=U(),r=co(),i=!!e,[a,o]=(0,y.useState)(e?.name||``),[s,c]=(0,y.useState)(e?.provider_type||`email`),[l,u]=(0,y.useState)(e?.printer_id||null),[d,f]=(0,y.useState)(e?.quiet_hours_enabled||!1),[p,m]=(0,y.useState)(e?.quiet_hours_start||`22:00`),[h,g]=(0,y.useState)(e?.quiet_hours_end||`07:00`),[_,v]=(0,y.useState)(e?.daily_digest_enabled||!1),[b,x]=(0,y.useState)(e?.daily_digest_time||`08:00`),[S,C]=(0,y.useState)(e?.on_print_start??!1),[w,T]=(0,y.useState)(e?.on_print_complete??!0),[E,D]=(0,y.useState)(e?.on_print_failed??!0),[O,k]=(0,y.useState)(e?.on_print_stopped??!0),[A,j]=(0,y.useState)(e?.on_print_progress??!1),[M,N]=(0,y.useState)(e?.on_billing_charge_failed??!0),[P,F]=(0,y.useState)(e?.on_printer_offline??!1),[I,L]=(0,y.useState)(e?.on_printer_error??!1),[R,z]=(0,y.useState)(e?.on_ai_failure_detection??!1),[B,V]=(0,y.useState)(e?.on_filament_low??!1),[ee,te]=(0,y.useState)(e?.on_maintenance_due??!1),[ne,re]=(0,y.useState)(e?.on_stock_reorder_alert??!1),[ie,ae]=(0,y.useState)(e?.on_stock_break_alert??!1),[oe,se]=(0,y.useState)(e?.on_plate_clear_required??!1),[H,ce]=(0,y.useState)(e?.on_bed_cooled??!1),[le,ue]=(0,y.useState)(e?.on_ha_sensor_alert??!1),[de,fe]=(0,y.useState)(e?.on_location_ha_sensor_alert??!1),[pe,me]=(0,y.useState)(e?.on_first_layer_complete??!1),[he,ge]=(0,y.useState)(e?.config?Object.fromEntries(Object.entries(e.config).filter(([e])=>e!==`event_priorities`).map(([e,t])=>[e,String(t)])):{}),[_e,ve]=(0,y.useState)((()=>{let t=e?.config?.event_priorities;if(!t||typeof t!=`object`)return{};let n={};for(let[e,r]of Object.entries(t)){let t=Number(r);Number.isInteger(t)&&t>=1&&t<=5&&(n[e]=t)}return n})()),[ye,be]=(0,y.useState)(null),[xe,Se]=(0,y.useState)(null),{data:Ce}=K({queryKey:[`printers`],queryFn:Z.getPrinters});(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&t()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[t]);let we=q({mutationFn:()=>Z.testNotificationConfig({provider_type:s,config:he}),onSuccess:e=>{be(e),Se(null)},onError:e=>{be({success:!1,message:e.message})}}),Te=q({mutationFn:e=>Z.createNotificationProvider(e),onSuccess:()=>{r.invalidateQueries({queryKey:[`notification-providers`]}),t()},onError:e=>{Se(e.message)}}),Ee=q({mutationFn:t=>Z.updateNotificationProvider(e.id,t),onSuccess:()=>{r.invalidateQueries({queryKey:[`notification-providers`]}),t()},onError:e=>{Se(e.message)}}),De=e=>{if(e.preventDefault(),Se(null),!a.trim()){Se(n(`notifications.nameRequired`));return}let t=Ae(s);for(let e of t)if(!he[e.key]?.trim()){Se(n(`notifications.fieldRequired`,{field:e.label}));return}if(s===`homeassistant`&&he.data?.trim()){let e;try{e=JSON.parse(he.data)}catch{Se(n(`notifications.haDataInvalid`));return}if(typeof e!=`object`||!e||Array.isArray(e)){Se(n(`notifications.haDataInvalid`));return}}if(s===`telegram`&&he.message_thread_id?.trim()&&!/^\d+$/.test(he.message_thread_id.trim())){Se(n(`notifications.telegramThreadIdInvalid`));return}let r=s===`ntfy`&&Object.keys(_e).length>0?{...he,event_priorities:_e}:he,o={name:a.trim(),provider_type:s,config:r,printer_id:l,quiet_hours_enabled:d,quiet_hours_start:d?p:null,quiet_hours_end:d?h:null,daily_digest_enabled:_,daily_digest_time:_?b:null,on_print_start:S,on_print_complete:w,on_print_failed:E,on_print_stopped:O,on_print_progress:A,on_billing_charge_failed:M,on_printer_offline:P,on_printer_error:I,on_ai_failure_detection:R,on_filament_low:B,on_maintenance_due:ee,on_stock_reorder_alert:ne,on_stock_break_alert:ie,on_plate_clear_required:oe,on_bed_cooled:H,on_ha_sensor_alert:le,on_location_ha_sensor_alert:de,on_first_layer_complete:pe};i?Ee.mutate(o):Te.mutate(o)},Oe=Te.isPending||Ee.isPending,ke=e=>{switch(e){case`callmebot`:return[{key:`phone`,label:`Phone Number`,placeholder:`+1234567890`,type:`text`,required:!0},{key:`apikey`,label:`API Key`,placeholder:`Your CallMeBot API key`,type:`text`,required:!0}];case`ntfy`:return[{key:`server`,label:`Server URL`,placeholder:`https://ntfy.sh`,type:`text`,required:!1},{key:`topic`,label:`Topic`,placeholder:`my-bambuddy`,type:`text`,required:!0},{key:`auth_token`,label:`Auth Token`,placeholder:`Optional authentication`,type:`password`,required:!1}];case`pushover`:return[{key:`user_key`,label:`User Key`,placeholder:`Your Pushover user key`,type:`text`,required:!0},{key:`app_token`,label:`App Token`,placeholder:`Your Pushover app token`,type:`text`,required:!0},{key:`priority`,label:`Priority`,placeholder:`0 (normal)`,type:`number`,required:!1},{key:`retry`,label:n(`notifications.pushoverRetry`),placeholder:`60`,type:`number`,required:!1,showIf:e=>e.priority===`2`},{key:`expire`,label:n(`notifications.pushoverExpire`),placeholder:`3600`,type:`number`,required:!1,showIf:e=>e.priority===`2`}];case`telegram`:return[{key:`bot_token`,label:`Bot Token`,placeholder:`Bot token from @BotFather`,type:`password`,required:!0},{key:`chat_id`,label:`Chat ID`,placeholder:`Your chat or group ID`,type:`text`,required:!0},{key:`message_thread_id`,label:n(`notifications.telegramThreadId`),placeholder:`123`,type:`number`,required:!1,help:n(`notifications.telegramThreadIdHelp`)}];case`email`:return[{key:`smtp_server`,label:`SMTP Server`,placeholder:`smtp.gmail.com`,type:`text`,required:!0},{key:`smtp_port`,label:`SMTP Port`,placeholder:`587`,type:`number`,required:!1},{key:`security`,label:`Security`,type:`select`,required:!1,options:[{value:`starttls`,label:`STARTTLS (Port 587)`},{value:`ssl`,label:`SSL/TLS (Port 465)`},{value:`none`,label:`None (Port 25)`}]},{key:`auth_enabled`,label:`Authentication`,type:`select`,required:!1,options:[{value:`true`,label:`Enabled`},{value:`false`,label:`Disabled`}]},{key:`username`,label:`Username`,placeholder:`your@email.com`,type:`text`,required:!1},{key:`password`,label:`Password`,placeholder:`App password`,type:`password`,required:!1},{key:`from_email`,label:`From Email`,placeholder:`your@email.com`,type:`text`,required:!0},{key:`to_email`,label:`To Email`,placeholder:`recipient@email.com`,type:`text`,required:!0}];case`discord`:return[{key:`webhook_url`,label:`Webhook URL`,placeholder:`https://discord.com/api/webhooks/...`,type:`text`,required:!0}];case`webhook`:return[{key:`webhook_url`,label:`Webhook URL`,placeholder:`https://example.com/webhook`,type:`text`,required:!0},{key:`payload_format`,label:`Payload Format`,type:`select`,required:!1,options:[{value:`generic`,label:`Generic JSON`},{value:`slack`,label:`Slack / Mattermost`}]},{key:`auth_header`,label:`Authorization`,placeholder:`Bearer token (optional)`,type:`password`,required:!1},{key:`field_title`,label:`Title Field Name`,placeholder:`title`,type:`text`,required:!1,showIf:e=>e.payload_format!==`slack`},{key:`field_message`,label:`Message Field Name`,placeholder:`message`,type:`text`,required:!1,showIf:e=>e.payload_format!==`slack`}];case`homeassistant`:return[{key:`service`,label:`Home Assistant Service`,placeholder:`notify.mobile_app_myphone`,type:`text`,required:!1},{key:`data`,label:`Data (JSON, optional)`,placeholder:`{"priority": "high", "ttl": 0, "channel": "3D Printing"}`,type:`textarea`,required:!1}];case`bark`:return[{key:`device_key`,label:`Device Key`,placeholder:`Your Bark device key`,type:`text`,required:!0},{key:`server`,label:`Server URL`,placeholder:`https://api.day.app`,type:`text`,required:!1},{key:`group`,label:`Group`,placeholder:`Bambuddy`,type:`text`,required:!1},{key:`sound`,label:`Sound`,placeholder:`minuet`,type:`text`,required:!1},{key:`level`,label:`Interruption Level`,type:`select`,required:!1,options:[{value:``,label:`Default`},{value:`active`,label:`Active`},{value:`timeSensitive`,label:`Time Sensitive`},{value:`critical`,label:`Critical (bypasses Silent/Focus)`},{value:`passive`,label:`Passive (no sound)`}]}];default:return[]}},Ae=e=>ke(e).filter(e=>e.required),je=ke(s);return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4 overflow-y-auto`,onClick:t,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-lg my-8 max-h-[90vh] overflow-y-auto`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:n(i?`notifications.editTitle`:`notifications.addTitle`)}),(0,G.jsx)(`button`,{onClick:t,className:`text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`form`,{onSubmit:De,className:`p-6 space-y-4`,children:[xe&&(0,G.jsx)(`div`,{className:`p-3 bg-red-100 dark:bg-red-500/20 border border-red-300 dark:border-red-500/50 rounded-lg text-sm text-red-700 dark:text-red-400`,children:xe}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`notifications.nameLabel`)}),(0,G.jsx)(`input`,{type:`text`,value:a,onChange:e=>o(e.target.value),placeholder:n(`notifications.namePlaceholder`),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`notifications.providerTypeLabel`)}),(0,G.jsx)(`select`,{value:s,onChange:e=>{c(e.target.value),ge({}),be(null)},disabled:i,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none disabled:opacity-50`,children:aWe.map(e=>(0,G.jsx)(`option`,{value:e,children:n(`notifications.providerTypes.${e}`,e)},e))}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(`notifications.providerDescriptions.${s}`,``)})]}),(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`notifications.configuration`)}),je.filter(e=>!(`showIf`in e)||e.showIf?.(he)!==!1).map(e=>(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[e.label,` `,e.required&&`*`]}),e.type===`select`&&`options`in e&&e.options?(0,G.jsx)(`select`,{value:he[e.key]||e.options[0]?.value||``,onChange:t=>{ge({...he,[e.key]:t.target.value}),be(null)},className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:e.options.map(e=>(0,G.jsx)(`option`,{value:e.value,children:e.label},e.value))}):e.type===`textarea`?(0,G.jsx)(`textarea`,{value:he[e.key]||``,onChange:t=>{ge({...he,[e.key]:t.target.value}),be(null)},placeholder:e.placeholder,rows:3,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none font-mono text-sm`}):(0,G.jsx)(`input`,{type:e.type,value:he[e.key]||``,onChange:t=>{ge({...he,[e.key]:t.target.value}),be(null)},placeholder:e.placeholder,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),`help`in e&&e.help&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e.help})]},e.key))]}),(0,G.jsx)(`div`,{className:`flex gap-2`,children:(0,G.jsxs)(Q,{type:`button`,variant:`secondary`,onClick:()=>{be(null),we.mutate()},disabled:we.isPending||Ae(s).length>0&&!he[Ae(s)[0]?.key],className:`flex-1`,children:[we.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Ql,{className:`w-4 h-4`}),n(`notifications.testConfiguration`)]})}),ye&&(0,G.jsx)(`div`,{className:`p-3 rounded-lg flex items-center gap-2 ${ye.success?`bg-bambu-green/20 border border-bambu-green/50 text-bambu-green`:`bg-red-100 dark:bg-red-500/20 border border-red-300 dark:border-red-500/50 text-red-700 dark:text-red-400`}`,children:ye.success?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(xs,{className:`w-5 h-5`}),(0,G.jsx)(`span`,{children:ye.message})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ds,{className:`w-5 h-5`}),(0,G.jsx)(`span`,{children:ye.message})]})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`notifications.printerFilter`)}),(0,G.jsxs)(`select`,{value:l??``,onChange:e=>u(e.target.value?Number(e.target.value):null),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:``,children:n(`notifications.allPrinters`)}),Ce?.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(`notifications.onlyFromPrinter`)})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`label`,{className:`text-sm text-white`,children:n(`notifications.quietHoursDnd`)}),(0,G.jsx)(hU,{checked:d,onChange:f})]}),d&&(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:n(`notifications.quietStart`)}),(0,G.jsx)(`input`,{type:`time`,value:p,onChange:e=>m(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:n(`notifications.quietEnd`)}),(0,G.jsx)(`input`,{type:`time`,value:h,onChange:e=>g(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-sm text-white`,children:n(`notifications.dailyDigestLabel`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.batchNotifications`)})]}),(0,G.jsx)(hU,{checked:_,onChange:v})]}),_&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:n(`notifications.sendDigestAt`)}),(0,G.jsx)(`input`,{type:`time`,value:b,onChange:e=>x(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(`notifications.digestCollected`)})]})]}),(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`notifications.notificationEvents`)}),(0,G.jsxs)(`div`,{className:`space-y-2 p-3 bg-bambu-dark rounded-lg`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase tracking-wide mb-2`,children:n(`notifications.printEvents`)}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.start`)}),(0,G.jsx)(hU,{checked:S,onChange:C})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.complete`)}),(0,G.jsx)(hU,{checked:w,onChange:T})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.failed`)}),(0,G.jsx)(hU,{checked:E,onChange:D})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.stopped`)}),(0,G.jsx)(hU,{checked:O,onChange:k})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between col-span-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.progress`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray ml-1`,children:n(`notifications.progressPercent`)})]}),(0,G.jsx)(hU,{checked:A,onChange:j})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between col-span-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.billingChargeFailedLabel`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray ml-1`,children:n(`notifications.billingChargeFailedDescription`)})]}),(0,G.jsx)(hU,{checked:M,onChange:N})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between col-span-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.plateClearRequired`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray ml-1`,children:n(`notifications.plateClearRequiredDescription`)})]}),(0,G.jsx)(hU,{checked:oe,onChange:se})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between col-span-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.bedCooled`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray ml-1`,children:n(`notifications.bedCooledAfterPrint`)})]}),(0,G.jsx)(hU,{checked:H,onChange:ce})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between col-span-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.firstLayerCompleteLabel`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray ml-1`,children:n(`notifications.firstLayerCompleteDescription`)})]}),(0,G.jsx)(hU,{checked:pe,onChange:me})]})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2 p-3 bg-bambu-dark rounded-lg`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase tracking-wide mb-2`,children:n(`notifications.printerStatus`)}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.offline`)}),(0,G.jsx)(hU,{checked:P,onChange:F})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between col-span-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.haSensorAlert`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray ml-1`,children:n(`notifications.haSensorAlertDescription`)})]}),(0,G.jsx)(hU,{checked:le,onChange:ue})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between col-span-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.locationHaSensorAlert`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray ml-1`,children:n(`notifications.locationHaSensorAlertDescription`)})]}),(0,G.jsx)(hU,{checked:de,onChange:fe})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.error`)}),(0,G.jsx)(hU,{checked:I,onChange:L})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.aiFailureDetection`)}),(0,G.jsx)(hU,{checked:R,onChange:z})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.lowFilament`)}),(0,G.jsx)(hU,{checked:B,onChange:V})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.maintenance`)}),(0,G.jsx)(hU,{checked:ee,onChange:te})]})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2 p-3 bg-bambu-dark rounded-lg`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase tracking-wide mb-2`,children:n(`notifications.inventoryAlerts`)}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.stockReorderAlert`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray ml-1`,children:n(`notifications.stockReorderAlertDescription`)})]}),(0,G.jsx)(hU,{checked:ne,onChange:re})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.stockBreakAlert`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray ml-1`,children:n(`notifications.stockBreakAlertDescription`)})]}),(0,G.jsx)(hU,{checked:ie,onChange:ae})]})]})]}),s===`ntfy`&&(()=>{let e=[];return S&&e.push({key:`on_print_start`,label:n(`notifications.start`)}),w&&e.push({key:`on_print_complete`,label:n(`notifications.complete`)}),E&&e.push({key:`on_print_failed`,label:n(`notifications.failed`)}),O&&e.push({key:`on_print_stopped`,label:n(`notifications.stopped`)}),A&&e.push({key:`on_print_progress`,label:n(`notifications.progress`)}),M&&e.push({key:`on_billing_charge_failed`,label:n(`notifications.billingChargeFailedLabel`)}),oe&&e.push({key:`on_plate_clear_required`,label:n(`notifications.plateClearRequired`)}),H&&e.push({key:`on_bed_cooled`,label:n(`notifications.bedCooled`)}),pe&&e.push({key:`on_first_layer_complete`,label:n(`notifications.firstLayerCompleteLabel`)}),P&&e.push({key:`on_printer_offline`,label:n(`notifications.offline`)}),I&&e.push({key:`on_printer_error`,label:n(`notifications.error`)}),le&&e.push({key:`on_ha_sensor_alert`,label:n(`notifications.haSensorAlert`)}),de&&e.push({key:`on_location_ha_sensor_alert`,label:n(`notifications.locationHaSensorAlert`)}),R&&e.push({key:`on_ai_failure_detection`,label:n(`notifications.aiFailureDetection`)}),B&&e.push({key:`on_filament_low`,label:n(`notifications.lowFilament`)}),ee&&e.push({key:`on_maintenance_due`,label:n(`notifications.maintenance`)}),ne&&e.push({key:`on_stock_reorder_alert`,label:n(`notifications.stockReorderAlert`)}),ie&&e.push({key:`on_stock_break_alert`,label:n(`notifications.stockBreakAlert`)}),e.length===0?null:(0,G.jsxs)(`div`,{className:`space-y-2 p-3 bg-bambu-dark rounded-lg`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase tracking-wide mb-1`,children:n(`notifications.eventPriority.sectionTitle`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:n(`notifications.eventPriority.helpNtfy`)}),(0,G.jsx)(`div`,{className:`space-y-2`,children:e.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:e.label}),(0,G.jsxs)(`select`,{value:_e[e.key]??3,onChange:t=>{let n=Number(t.target.value);ve(t=>({...t,[e.key]:n}))},className:`px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-sm text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:1,children:n(`notifications.eventPriority.min`)}),(0,G.jsx)(`option`,{value:2,children:n(`notifications.eventPriority.low`)}),(0,G.jsx)(`option`,{value:3,children:n(`notifications.eventPriority.default`)}),(0,G.jsx)(`option`,{value:4,children:n(`notifications.eventPriority.high`)}),(0,G.jsx)(`option`,{value:5,children:n(`notifications.eventPriority.urgent`)})]})]},e.key))})]})})()]}),(0,G.jsxs)(`div`,{className:`flex gap-3 pt-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:t,className:`flex-1`,children:n(`notifications.cancel`)}),(0,G.jsxs)(Q,{type:`submit`,disabled:Oe,className:`flex-1`,children:[Oe?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Kl,{className:`w-4 h-4`}),n(i?`notifications.save`:`notifications.add`)]})]})]})]})})}function sWe({template:e,onClose:t}){let{t:n}=U(),r=co(),i=(0,y.useRef)(null),[a,o]=(0,y.useState)(e.title_template),[s,c]=(0,y.useState)(e.body_template),[l,u]=(0,y.useState)(null),[d,f]=(0,y.useState)(!0),{data:p}=K({queryKey:[`template-variables`],queryFn:Z.getTemplateVariables}),m=p?.find(t=>t.event_type===e.event_type),{data:h,isLoading:g}=K({queryKey:[`template-preview`,e.event_type,a,s],queryFn:()=>Z.previewTemplate({event_type:e.event_type,title_template:a,body_template:s}),enabled:d&&a.length>0&&s.length>0});(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&t()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[t]);let _=q({mutationFn:t=>Z.updateNotificationTemplate(e.id,t),onSuccess:()=>{r.invalidateQueries({queryKey:[`notification-templates`]}),t()},onError:e=>{u(e.message)}}),v=q({mutationFn:()=>Z.resetNotificationTemplate(e.id),onSuccess:e=>{o(e.title_template),c(e.body_template),r.invalidateQueries({queryKey:[`notification-templates`]})},onError:e=>{u(e.message)}}),b=e=>{if(e.preventDefault(),u(null),!a.trim()){u(n(`notifications.titleRequired`));return}if(!s.trim()){u(n(`notifications.bodyRequired`));return}_.mutate({title_template:a,body_template:s})},x=e=>{let t=i.current;if(!t)return;let n=t.selectionStart,r=t.selectionEnd,a=s,o=a.substring(0,n),l=a.substring(r);c(o+`{${e}}`+l),setTimeout(()=>{t.focus();let r=n+e.length+2;t.setSelectionRange(r,r)},0)},S=a!==e.title_template||s!==e.body_template;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/80 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg w-full max-w-2xl max-h-[90vh] flex flex-col`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary shrink-0`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:n(`notifications.editTemplate`,{name:e.name})}),(0,G.jsx)(`button`,{onClick:t,className:`p-1 hover:bg-bambu-dark-tertiary rounded transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5 text-bambu-gray`})})]}),(0,G.jsxs)(`form`,{onSubmit:b,className:`flex-1 overflow-y-auto p-4 space-y-4`,children:[l&&(0,G.jsx)(`div`,{className:`p-3 bg-red-100 dark:bg-red-500/20 border border-red-300 dark:border-red-500/50 rounded text-red-700 dark:text-red-400 text-sm`,children:l}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:n(`notifications.titleLabel`)}),(0,G.jsx)(`input`,{type:`text`,value:a,onChange:e=>o(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white focus:outline-none focus:ring-1 focus:ring-bambu-green`,placeholder:n(`notifications.titlePlaceholder`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:n(`notifications.bodyLabel`)}),(0,G.jsx)(`textarea`,{ref:i,value:s,onChange:e=>c(e.target.value),rows:4,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white focus:outline-none focus:ring-1 focus:ring-bambu-green font-mono text-sm resize-none`,placeholder:n(`notifications.bodyPlaceholder`)})]}),m&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-2`,children:n(`notifications.availableVariables`)}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-2`,children:m.variables.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>x(e),className:`inline-flex items-center gap-1 px-2 py-1 bg-bambu-dark hover:bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded text-xs text-bambu-gray hover:text-white transition-colors`,children:[(0,G.jsx)(Pl,{className:`w-3 h-3`}),e]},e))}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/60 mt-1`,children:n(`notifications.clickToInsert`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsxs)(`label`,{className:`text-sm font-medium text-bambu-gray flex items-center gap-2`,children:[(0,G.jsx)(ic,{className:`w-4 h-4`}),n(`notifications.livePreview`)]}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>f(!d),className:`text-xs text-bambu-green hover:text-bambu-green-light`,children:n(d?`notifications.hide`:`notifications.show`)})]}),d&&(0,G.jsx)(`div`,{className:`bg-bambu-dark border border-bambu-dark-tertiary rounded p-3 space-y-2`,children:g?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray text-sm`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),n(`notifications.loadingPreview`)]}):h?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:n(`notifications.titlePreview`)}),(0,G.jsx)(`div`,{className:`text-white font-medium`,children:h.title})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:n(`notifications.bodyPreview`)}),(0,G.jsx)(`div`,{className:`text-white whitespace-pre-wrap text-sm`,children:h.body})]})]}):(0,G.jsx)(`div`,{className:`text-bambu-gray text-sm`,children:n(`notifications.enterTemplateContent`)})})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-t border-bambu-dark-tertiary shrink-0`,children:[(0,G.jsxs)(Q,{type:`button`,variant:`ghost`,onClick:()=>v.mutate(),disabled:v.isPending,className:`text-orange-600 dark:text-orange-400 hover:text-orange-700 dark:hover:text-orange-300`,children:[v.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin mr-2`}):(0,G.jsx)(Ul,{className:`w-4 h-4 mr-2`}),n(`notifications.resetToDefault`)]}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:t,children:n(`notifications.cancel`)}),(0,G.jsxs)(Q,{onClick:b,disabled:_.isPending||!S,children:[_.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin mr-2`}):(0,G.jsx)(Kl,{className:`w-4 h-4 mr-2`}),n(`notifications.save`)]})]})]})]})})}var cWe={print_start:`text-blue-700 dark:text-blue-400`,print_complete:`text-bambu-green`,print_failed:`text-red-700 dark:text-red-400`,print_stopped:`text-orange-700 dark:text-orange-400`,print_progress:`text-yellow-700 dark:text-yellow-400`,printer_offline:`text-gray-400`,printer_error:`text-rose-700 dark:text-rose-400`,filament_low:`text-cyan-700 dark:text-cyan-400`,maintenance_due:`text-purple-700 dark:text-purple-400`,test:`text-bambu-gray`};function lWe({onClose:e}){let{t}=U(),n=co(),{showToast:r}=Gd(),[i,a]=(0,y.useState)(7),[o,s]=(0,y.useState)(null),[c,l]=(0,y.useState)(!1),{data:u}=K({queryKey:[`settings`],queryFn:Z.getSettings}),d=u?.time_format||`system`,{data:f,isLoading:p,refetch:m,isRefetching:h}=K({queryKey:[`notification-logs`,i,c],queryFn:()=>Z.getNotificationLogs({days:i,limit:100,success:c?!1:void 0})}),{data:g}=K({queryKey:[`notification-log-stats`,i],queryFn:()=>Z.getNotificationLogStats(i)}),_=q({mutationFn:()=>Z.clearNotificationLogs(30),onSuccess:e=>{r(e.message,`success`),n.invalidateQueries({queryKey:[`notification-logs`]}),n.invalidateQueries({queryKey:[`notification-log-stats`]})},onError:e=>{r(`Failed to clear logs: ${e.message}`,`error`)}}),v=e=>{let n=ep(e);if(!n)return``;let r=new Date().getTime()-n.getTime();return r<6e4?t(`notifications.justNow`):r<36e5?`${Math.floor(r/6e4)}m ago`:r<864e5?`${Math.floor(r/36e5)}h ago`:n.toLocaleDateString()+` `+ip(n,d)};return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg w-full max-w-3xl max-h-[85vh] flex flex-col`,children:[(0,G.jsxs)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(Rc,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:t(`notifications.notificationLog`)})]}),(0,G.jsx)(`button`,{onClick:e,className:`text-bambu-gray hover:text-white transition-colors`,children:`×`})]}),g&&(0,G.jsx)(`div`,{className:`px-4 py-3 border-b border-bambu-dark-tertiary bg-bambu-dark/50`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-6 text-sm`,children:[(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[t(`notifications.statsSummary`,{days:i}),` `,(0,G.jsx)(`span`,{className:`text-white font-medium`,children:g.total}),` `,t(`notifications.statsNotifications`)]}),(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-bambu-green`,children:[(0,G.jsx)(xs,{className:`w-4 h-4`}),t(`notifications.statsSent`,{count:g.success_count})]}),g.failure_count>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-red-700 dark:text-red-400`,children:[(0,G.jsx)(Ds,{className:`w-4 h-4`}),t(`notifications.statsFailed`,{count:g.failure_count})]})]})}),(0,G.jsxs)(`div`,{className:`px-4 py-3 border-b border-bambu-dark-tertiary flex items-center gap-4`,children:[(0,G.jsxs)(`select`,{value:i,onChange:e=>a(Number(e.target.value)),className:`px-3 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm focus:outline-none focus:ring-1 focus:ring-bambu-green`,children:[(0,G.jsx)(`option`,{value:1,children:t(`notifications.last24Hours`)}),(0,G.jsx)(`option`,{value:7,children:t(`notifications.last7Days`)}),(0,G.jsx)(`option`,{value:30,children:t(`notifications.last30Days`)}),(0,G.jsx)(`option`,{value:90,children:t(`notifications.last90Days`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 text-sm text-bambu-gray cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:c,onChange:e=>l(e.target.checked),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),t(`notifications.showFailedOnly`)]}),(0,G.jsx)(`div`,{className:`flex-1`}),(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>m(),disabled:h,children:[h?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Vl,{className:`w-4 h-4`}),t(`notifications.refresh`)]}),(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>_.mutate(),disabled:_.isPending,className:`text-red-700 dark:text-red-400 hover:text-red-800 dark:hover:text-red-300`,children:[_.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Nu,{className:`w-4 h-4`}),t(`notifications.clearOld`)]})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto p-4`,children:p?(0,G.jsx)(`div`,{className:`flex justify-center py-12`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})}):f&&f.length>0?(0,G.jsx)(`div`,{className:`space-y-2`,children:f.map(e=>(0,G.jsx)(uWe,{log:e,isExpanded:o===e.id,onToggle:()=>s(o===e.id?null:e.id),formatDate:v,formatFullDate:e=>rp(e,d)},e.id))}):(0,G.jsxs)(`div`,{className:`text-center py-12 text-bambu-gray`,children:[(0,G.jsx)(Rc,{className:`w-12 h-12 mx-auto mb-3 opacity-30`}),(0,G.jsx)(`p`,{className:`text-sm`,children:t(c?`notifications.noFailedNotifications`:`notifications.noNotificationsLogged`)})]})})]})})}function uWe({log:e,isExpanded:t,onToggle:n,formatDate:r,formatFullDate:i}){let{t:a}=U();return(0,G.jsxs)(`div`,{className:`border rounded-lg overflow-hidden transition-colors ${e.success?`border-bambu-dark-tertiary bg-bambu-dark/30`:`border-red-500/30 bg-red-500/5`}`,children:[(0,G.jsxs)(`button`,{className:`w-full px-3 py-2 flex items-center gap-3 text-left hover:bg-bambu-dark/50 transition-colors`,onClick:n,children:[e.success?(0,G.jsx)(xs,{className:`w-4 h-4 text-bambu-green shrink-0`}):(0,G.jsx)(Ds,{className:`w-4 h-4 text-red-600 dark:text-red-400 shrink-0`}),(0,G.jsx)(`span`,{className:`text-xs font-medium ${cWe[e.event_type]||`text-bambu-gray`}`,children:a(`notifications.eventTypes.${e.event_type}`,e.event_type)}),(0,G.jsx)(`span`,{className:`text-sm text-white truncate flex-1`,children:e.provider_name||a(`notifications.unknownProvider`)}),e.printer_name&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:e.printer_name}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray shrink-0`,children:r(e.created_at)}),t?(0,G.jsx)(gs,{className:`w-4 h-4 text-bambu-gray shrink-0`}):(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray shrink-0`})]}),t&&(0,G.jsxs)(`div`,{className:`px-3 py-2 border-t border-bambu-dark-tertiary bg-bambu-dark/20 space-y-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-1`,children:a(`notifications.logTitle`)}),(0,G.jsx)(`p`,{className:`text-sm text-white`,children:e.title})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-1`,children:a(`notifications.logMessage`)}),(0,G.jsx)(`p`,{className:`text-sm text-white whitespace-pre-wrap`,children:e.message})]}),!e.success&&e.error_message&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-red-700 dark:text-red-400 mb-1`,children:a(`notifications.logError`)}),(0,G.jsx)(`p`,{className:`text-sm text-red-700 dark:text-red-300`,children:e.error_message})]}),(0,G.jsxs)(`div`,{className:`flex gap-4 text-xs text-bambu-gray pt-1`,children:[(0,G.jsx)(`span`,{children:a(`notifications.logProvider`,{type:e.provider_type})}),(0,G.jsx)(`span`,{children:a(`notifications.logTime`,{time:i(e.created_at)})})]})]})]})}var dWe=Object.defineProperty,q8=Object.getOwnPropertySymbols,fWe=Object.prototype.hasOwnProperty,pWe=Object.prototype.propertyIsEnumerable,mWe=(e,t,n)=>t in e?dWe(e,t,{enumerable:!0,configurable:!0,writable:!0,value:n}):e[t]=n,J8=(e,t)=>{for(var n in t||={})fWe.call(t,n)&&mWe(e,n,t[n]);if(q8)for(var n of q8(t))pWe.call(t,n)&&mWe(e,n,t[n]);return e},Y8=(e,t)=>{var n={};for(var r in e)fWe.call(e,r)&&t.indexOf(r)<0&&(n[r]=e[r]);if(e!=null&&q8)for(var r of q8(e))t.indexOf(r)<0&&pWe.call(e,r)&&(n[r]=e[r]);return n},X8;(e=>{let t=class t{constructor(e,n,r,a){if(this.version=e,this.errorCorrectionLevel=n,this.modules=[],this.isFunction=[],e<t.MIN_VERSION||e>t.MAX_VERSION)throw RangeError(`Version value out of range`);if(a<-1||a>7)throw RangeError(`Mask value out of range`);this.size=e*4+17;let o=[];for(let e=0;e<this.size;e++)o.push(!1);for(let e=0;e<this.size;e++)this.modules.push(o.slice()),this.isFunction.push(o.slice());this.drawFunctionPatterns();let s=this.addEccAndInterleave(r);if(this.drawCodewords(s),a==-1){let e=1e9;for(let t=0;t<8;t++){this.applyMask(t),this.drawFormatBits(t);let n=this.getPenaltyScore();n<e&&(a=t,e=n),this.applyMask(t)}}i(0<=a&&a<=7),this.mask=a,this.applyMask(a),this.drawFormatBits(a),this.isFunction=[]}static encodeText(n,r){let i=e.QrSegment.makeSegments(n);return t.encodeSegments(i,r)}static encodeBinary(n,r){let i=e.QrSegment.makeBytes(n);return t.encodeSegments([i],r)}static encodeSegments(e,r,a=1,s=40,c=-1,l=!0){if(!(t.MIN_VERSION<=a&&a<=s&&s<=t.MAX_VERSION)||c<-1||c>7)throw RangeError(`Invalid value`);let u,d;for(u=a;;u++){let n=t.getNumDataCodewords(u,r)*8,i=o.getTotalBits(e,u);if(i<=n){d=i;break}if(u>=s)throw RangeError(`Data too long`)}for(let e of[t.Ecc.MEDIUM,t.Ecc.QUARTILE,t.Ecc.HIGH])l&&d<=t.getNumDataCodewords(u,e)*8&&(r=e);let f=[];for(let t of e){n(t.mode.modeBits,4,f),n(t.numChars,t.mode.numCharCountBits(u),f);for(let e of t.getData())f.push(e)}i(f.length==d);let p=t.getNumDataCodewords(u,r)*8;i(f.length<=p),n(0,Math.min(4,p-f.length),f),n(0,(8-f.length%8)%8,f),i(f.length%8==0);for(let e=236;f.length<p;e^=253)n(e,8,f);let m=[];for(;m.length*8<f.length;)m.push(0);return f.forEach((e,t)=>m[t>>>3]|=e<<7-(t&7)),new t(u,r,m,c)}getModule(e,t){return 0<=e&&e<this.size&&0<=t&&t<this.size&&this.modules[t][e]}getModules(){return this.modules}drawFunctionPatterns(){for(let e=0;e<this.size;e++)this.setFunctionModule(6,e,e%2==0),this.setFunctionModule(e,6,e%2==0);this.drawFinderPattern(3,3),this.drawFinderPattern(this.size-4,3),this.drawFinderPattern(3,this.size-4);let e=this.getAlignmentPatternPositions(),t=e.length;for(let n=0;n<t;n++)for(let r=0;r<t;r++)n==0&&r==0||n==0&&r==t-1||n==t-1&&r==0||this.drawAlignmentPattern(e[n],e[r]);this.drawFormatBits(0),this.drawVersion()}drawFormatBits(e){let t=this.errorCorrectionLevel.formatBits<<3|e,n=t;for(let e=0;e<10;e++)n=n<<1^(n>>>9)*1335;let a=(t<<10|n)^21522;i(a>>>15==0);for(let e=0;e<=5;e++)this.setFunctionModule(8,e,r(a,e));this.setFunctionModule(8,7,r(a,6)),this.setFunctionModule(8,8,r(a,7)),this.setFunctionModule(7,8,r(a,8));for(let e=9;e<15;e++)this.setFunctionModule(14-e,8,r(a,e));for(let e=0;e<8;e++)this.setFunctionModule(this.size-1-e,8,r(a,e));for(let e=8;e<15;e++)this.setFunctionModule(8,this.size-15+e,r(a,e));this.setFunctionModule(8,this.size-8,!0)}drawVersion(){if(this.version<7)return;let e=this.version;for(let t=0;t<12;t++)e=e<<1^(e>>>11)*7973;let t=this.version<<12|e;i(t>>>18==0);for(let e=0;e<18;e++){let n=r(t,e),i=this.size-11+e%3,a=Math.floor(e/3);this.setFunctionModule(i,a,n),this.setFunctionModule(a,i,n)}}drawFinderPattern(e,t){for(let n=-4;n<=4;n++)for(let r=-4;r<=4;r++){let i=Math.max(Math.abs(r),Math.abs(n)),a=e+r,o=t+n;0<=a&&a<this.size&&0<=o&&o<this.size&&this.setFunctionModule(a,o,i!=2&&i!=4)}}drawAlignmentPattern(e,t){for(let n=-2;n<=2;n++)for(let r=-2;r<=2;r++)this.setFunctionModule(e+r,t+n,Math.max(Math.abs(r),Math.abs(n))!=1)}setFunctionModule(e,t,n){this.modules[t][e]=n,this.isFunction[t][e]=!0}addEccAndInterleave(e){let n=this.version,r=this.errorCorrectionLevel;if(e.length!=t.getNumDataCodewords(n,r))throw RangeError(`Invalid argument`);let a=t.NUM_ERROR_CORRECTION_BLOCKS[r.ordinal][n],o=t.ECC_CODEWORDS_PER_BLOCK[r.ordinal][n],s=Math.floor(t.getNumRawDataModules(n)/8),c=a-s%a,l=Math.floor(s/a),u=[],d=t.reedSolomonComputeDivisor(o);for(let n=0,r=0;n<a;n++){let i=e.slice(r,r+l-o+(n<c?0:1));r+=i.length;let a=t.reedSolomonComputeRemainder(i,d);n<c&&i.push(0),u.push(i.concat(a))}let f=[];for(let e=0;e<u[0].length;e++)u.forEach((t,n)=>{(e!=l-o||n>=c)&&f.push(t[e])});return i(f.length==s),f}drawCodewords(e){if(e.length!=Math.floor(t.getNumRawDataModules(this.version)/8))throw RangeError(`Invalid argument`);let n=0;for(let t=this.size-1;t>=1;t-=2){t==6&&(t=5);for(let i=0;i<this.size;i++)for(let a=0;a<2;a++){let o=t-a,s=t+1&2?i:this.size-1-i;!this.isFunction[s][o]&&n<e.length*8&&(this.modules[s][o]=r(e[n>>>3],7-(n&7)),n++)}}i(n==e.length*8)}applyMask(e){if(e<0||e>7)throw RangeError(`Mask value out of range`);for(let t=0;t<this.size;t++)for(let n=0;n<this.size;n++){let r;switch(e){case 0:r=(n+t)%2==0;break;case 1:r=t%2==0;break;case 2:r=n%3==0;break;case 3:r=(n+t)%3==0;break;case 4:r=(Math.floor(n/3)+Math.floor(t/2))%2==0;break;case 5:r=n*t%2+n*t%3==0;break;case 6:r=(n*t%2+n*t%3)%2==0;break;case 7:r=((n+t)%2+n*t%3)%2==0;break;default:throw Error(`Unreachable`)}!this.isFunction[t][n]&&r&&(this.modules[t][n]=!this.modules[t][n])}}getPenaltyScore(){let e=0;for(let n=0;n<this.size;n++){let r=!1,i=0,a=[0,0,0,0,0,0,0];for(let o=0;o<this.size;o++)this.modules[n][o]==r?(i++,i==5?e+=t.PENALTY_N1:i>5&&e++):(this.finderPenaltyAddHistory(i,a),r||(e+=this.finderPenaltyCountPatterns(a)*t.PENALTY_N3),r=this.modules[n][o],i=1);e+=this.finderPenaltyTerminateAndCount(r,i,a)*t.PENALTY_N3}for(let n=0;n<this.size;n++){let r=!1,i=0,a=[0,0,0,0,0,0,0];for(let o=0;o<this.size;o++)this.modules[o][n]==r?(i++,i==5?e+=t.PENALTY_N1:i>5&&e++):(this.finderPenaltyAddHistory(i,a),r||(e+=this.finderPenaltyCountPatterns(a)*t.PENALTY_N3),r=this.modules[o][n],i=1);e+=this.finderPenaltyTerminateAndCount(r,i,a)*t.PENALTY_N3}for(let n=0;n<this.size-1;n++)for(let r=0;r<this.size-1;r++){let i=this.modules[n][r];i==this.modules[n][r+1]&&i==this.modules[n+1][r]&&i==this.modules[n+1][r+1]&&(e+=t.PENALTY_N2)}let n=0;for(let e of this.modules)n=e.reduce((e,t)=>e+ +!!t,n);let r=this.size*this.size,a=Math.ceil(Math.abs(n*20-r*10)/r)-1;return i(0<=a&&a<=9),e+=a*t.PENALTY_N4,i(0<=e&&e<=2568888),e}getAlignmentPatternPositions(){if(this.version==1)return[];{let e=Math.floor(this.version/7)+2,t=this.version==32?26:Math.ceil((this.version*4+4)/(e*2-2))*2,n=[6];for(let r=this.size-7;n.length<e;r-=t)n.splice(1,0,r);return n}}static getNumRawDataModules(e){if(e<t.MIN_VERSION||e>t.MAX_VERSION)throw RangeError(`Version number out of range`);let n=(16*e+128)*e+64;if(e>=2){let t=Math.floor(e/7)+2;n-=(25*t-10)*t-55,e>=7&&(n-=36)}return i(208<=n&&n<=29648),n}static getNumDataCodewords(e,n){return Math.floor(t.getNumRawDataModules(e)/8)-t.ECC_CODEWORDS_PER_BLOCK[n.ordinal][e]*t.NUM_ERROR_CORRECTION_BLOCKS[n.ordinal][e]}static reedSolomonComputeDivisor(e){if(e<1||e>255)throw RangeError(`Degree out of range`);let n=[];for(let t=0;t<e-1;t++)n.push(0);n.push(1);let r=1;for(let i=0;i<e;i++){for(let e=0;e<n.length;e++)n[e]=t.reedSolomonMultiply(n[e],r),e+1<n.length&&(n[e]^=n[e+1]);r=t.reedSolomonMultiply(r,2)}return n}static reedSolomonComputeRemainder(e,n){let r=n.map(e=>0);for(let i of e){let e=i^r.shift();r.push(0),n.forEach((n,i)=>r[i]^=t.reedSolomonMultiply(n,e))}return r}static reedSolomonMultiply(e,t){if(e>>>8||t>>>8)throw RangeError(`Byte out of range`);let n=0;for(let r=7;r>=0;r--)n=n<<1^(n>>>7)*285,n^=(t>>>r&1)*e;return i(n>>>8==0),n}finderPenaltyCountPatterns(e){let t=e[1];i(t<=this.size*3);let n=t>0&&e[2]==t&&e[3]==t*3&&e[4]==t&&e[5]==t;return(n&&e[0]>=t*4&&e[6]>=t?1:0)+(n&&e[6]>=t*4&&e[0]>=t?1:0)}finderPenaltyTerminateAndCount(e,t,n){return e&&(this.finderPenaltyAddHistory(t,n),t=0),t+=this.size,this.finderPenaltyAddHistory(t,n),this.finderPenaltyCountPatterns(n)}finderPenaltyAddHistory(e,t){t[0]==0&&(e+=this.size),t.pop(),t.unshift(e)}};t.MIN_VERSION=1,t.MAX_VERSION=40,t.PENALTY_N1=3,t.PENALTY_N2=3,t.PENALTY_N3=40,t.PENALTY_N4=10,t.ECC_CODEWORDS_PER_BLOCK=[[-1,7,10,15,20,26,18,20,24,30,18,20,24,26,30,22,24,28,30,28,28,28,28,30,30,26,28,30,30,30,30,30,30,30,30,30,30,30,30,30,30],[-1,10,16,26,18,24,16,18,22,22,26,30,22,22,24,24,28,28,26,26,26,26,28,28,28,28,28,28,28,28,28,28,28,28,28,28,28,28,28,28,28],[-1,13,22,18,26,18,24,18,22,20,24,28,26,24,20,30,24,28,28,26,30,28,30,30,30,30,28,30,30,30,30,30,30,30,30,30,30,30,30,30,30],[-1,17,28,22,16,22,28,26,26,24,28,24,28,22,24,24,30,28,28,26,28,30,24,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30]],t.NUM_ERROR_CORRECTION_BLOCKS=[[-1,1,1,1,1,1,2,2,2,2,4,4,4,4,4,6,6,6,6,7,8,8,9,9,10,12,12,12,13,14,15,16,17,18,19,19,20,21,22,24,25],[-1,1,1,1,2,2,4,4,4,5,5,5,8,9,9,10,10,11,13,14,16,17,17,18,20,21,23,25,26,28,29,31,33,35,37,38,40,43,45,47,49],[-1,1,1,2,2,4,4,6,6,8,8,8,10,12,16,12,17,16,18,21,20,23,23,25,27,29,34,34,35,38,40,43,45,48,51,53,56,59,62,65,68],[-1,1,1,2,4,4,4,5,6,8,8,11,11,16,16,18,16,19,21,25,25,25,34,30,32,35,37,40,42,45,48,51,54,57,60,63,66,70,74,77,81]],e.QrCode=t;function n(e,t,n){if(t<0||t>31||e>>>t)throw RangeError(`Value out of range`);for(let r=t-1;r>=0;r--)n.push(e>>>r&1)}function r(e,t){return(e>>>t&1)!=0}function i(e){if(!e)throw Error(`Assertion error`)}let a=class e{constructor(e,t,n){if(this.mode=e,this.numChars=t,this.bitData=n,t<0)throw RangeError(`Invalid argument`);this.bitData=n.slice()}static makeBytes(t){let r=[];for(let e of t)n(e,8,r);return new e(e.Mode.BYTE,t.length,r)}static makeNumeric(t){if(!e.isNumeric(t))throw RangeError(`String contains non-numeric characters`);let r=[];for(let e=0;e<t.length;){let i=Math.min(t.length-e,3);n(parseInt(t.substring(e,e+i),10),i*3+1,r),e+=i}return new e(e.Mode.NUMERIC,t.length,r)}static makeAlphanumeric(t){if(!e.isAlphanumeric(t))throw RangeError(`String contains unencodable characters in alphanumeric mode`);let r=[],i;for(i=0;i+2<=t.length;i+=2){let a=e.ALPHANUMERIC_CHARSET.indexOf(t.charAt(i))*45;a+=e.ALPHANUMERIC_CHARSET.indexOf(t.charAt(i+1)),n(a,11,r)}return i<t.length&&n(e.ALPHANUMERIC_CHARSET.indexOf(t.charAt(i)),6,r),new e(e.Mode.ALPHANUMERIC,t.length,r)}static makeSegments(t){return t==``?[]:e.isNumeric(t)?[e.makeNumeric(t)]:e.isAlphanumeric(t)?[e.makeAlphanumeric(t)]:[e.makeBytes(e.toUtf8ByteArray(t))]}static makeEci(t){let r=[];if(t<0)throw RangeError(`ECI assignment value out of range`);if(t<128)n(t,8,r);else if(t<16384)n(2,2,r),n(t,14,r);else if(t<1e6)n(6,3,r),n(t,21,r);else throw RangeError(`ECI assignment value out of range`);return new e(e.Mode.ECI,0,r)}static isNumeric(t){return e.NUMERIC_REGEX.test(t)}static isAlphanumeric(t){return e.ALPHANUMERIC_REGEX.test(t)}getData(){return this.bitData.slice()}static getTotalBits(e,t){let n=0;for(let r of e){let e=r.mode.numCharCountBits(t);if(r.numChars>=1<<e)return 1/0;n+=4+e+r.bitData.length}return n}static toUtf8ByteArray(e){e=encodeURI(e);let t=[];for(let n=0;n<e.length;n++)e.charAt(n)==`%`?(t.push(parseInt(e.substring(n+1,n+3),16)),n+=2):t.push(e.charCodeAt(n));return t}};a.NUMERIC_REGEX=/^[0-9]*$/,a.ALPHANUMERIC_REGEX=/^[A-Z0-9 $%*+.\/:-]*$/,a.ALPHANUMERIC_CHARSET=`0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ $%*+-./:`;let o=a;e.QrSegment=a})(X8||={}),(e=>{(e=>{let t=class{constructor(e,t){this.ordinal=e,this.formatBits=t}};t.LOW=new t(0,1),t.MEDIUM=new t(1,0),t.QUARTILE=new t(2,3),t.HIGH=new t(3,2),e.Ecc=t})(e.QrCode||={})})(X8||={}),(e=>{(e=>{let t=class{constructor(e,t){this.modeBits=e,this.numBitsCharCount=t}numCharCountBits(e){return this.numBitsCharCount[Math.floor((e+7)/17)]}};t.NUMERIC=new t(1,[10,12,14]),t.ALPHANUMERIC=new t(2,[9,11,13]),t.BYTE=new t(4,[8,16,16]),t.KANJI=new t(8,[8,10,12]),t.ECI=new t(7,[0,0,0]),e.Mode=t})(e.QrSegment||={})})(X8||={});var Z8=X8,hWe={L:Z8.QrCode.Ecc.LOW,M:Z8.QrCode.Ecc.MEDIUM,Q:Z8.QrCode.Ecc.QUARTILE,H:Z8.QrCode.Ecc.HIGH},gWe=128,_We=`L`,vWe=`#FFFFFF`,yWe=`#000000`,bWe=!1,xWe=1,SWe=4,CWe=0,wWe=.1;function TWe(e,t=0){let n=[];return e.forEach(function(e,r){let i=null;e.forEach(function(a,o){if(!a&&i!==null){n.push(`M${i+t} ${r+t}h${o-i}v1H${i+t}z`),i=null;return}if(o===e.length-1){if(!a)return;i===null?n.push(`M${o+t},${r+t} h1v1H${o+t}z`):n.push(`M${i+t},${r+t} h${o+1-i}v1H${i+t}z`);return}a&&i===null&&(i=o)})}),n.join(``)}function EWe(e,t){return e.slice().map((e,n)=>n<t.y||n>=t.y+t.h?e:e.map((e,n)=>n<t.x||n>=t.x+t.w?e:!1))}function DWe(e,t,n,r){if(r==null)return null;let i=e.length+n*2,a=Math.floor(t*wWe),o=i/t,s=(r.width||a)*o,c=(r.height||a)*o,l=r.x==null?e.length/2-s/2:r.x*o,u=r.y==null?e.length/2-c/2:r.y*o,d=r.opacity==null?1:r.opacity,f=null;if(r.excavate){let e=Math.floor(l),t=Math.floor(u);f={x:e,y:t,w:Math.ceil(s+l-e),h:Math.ceil(c+u-t)}}let p=r.crossOrigin;return{x:l,y:u,h:c,w:s,excavation:f,opacity:d,crossOrigin:p}}function OWe(e,t){return t==null?e?SWe:CWe:Math.max(Math.floor(t),0)}function kWe({value:e,level:t,minVersion:n,includeMargin:r,marginSize:i,imageSettings:a,size:o,boostLevel:s}){let c=y.useMemo(()=>{let r=(Array.isArray(e)?e:[e]).reduce((e,t)=>(e.push(...Z8.QrSegment.makeSegments(t)),e),[]);return Z8.QrCode.encodeSegments(r,hWe[t],n,void 0,void 0,s)},[e,t,n,s]),{cells:l,margin:u,numCells:d,calculatedImageSettings:f}=y.useMemo(()=>{let e=c.getModules(),t=OWe(r,i);return{cells:e,margin:t,numCells:e.length+t*2,calculatedImageSettings:DWe(e,o,t,a)}},[c,o,a,r,i]);return{qrcode:c,margin:u,cells:l,numCells:d,calculatedImageSettings:f}}var AWe=function(){try{new Path2D().addPath(new Path2D)}catch{return!1}return!0}(),jWe=y.forwardRef(function(e,t){let n=e,{value:r,size:i=gWe,level:a=_We,bgColor:o=vWe,fgColor:s=yWe,includeMargin:c=bWe,minVersion:l=xWe,boostLevel:u,marginSize:d,imageSettings:f}=n,p=Y8(n,[`value`,`size`,`level`,`bgColor`,`fgColor`,`includeMargin`,`minVersion`,`boostLevel`,`marginSize`,`imageSettings`]),{style:m}=p,h=Y8(p,[`style`]),g=f?.src,_=y.useRef(null),v=y.useRef(null),b=y.useCallback(e=>{_.current=e,typeof t==`function`?t(e):t&&(t.current=e)},[t]),[x,S]=y.useState(!1),{margin:C,cells:w,numCells:T,calculatedImageSettings:E}=kWe({value:r,level:a,minVersion:l,boostLevel:u,includeMargin:c,marginSize:d,imageSettings:f,size:i});y.useEffect(()=>{if(_.current!=null){let e=_.current,t=e.getContext(`2d`);if(!t)return;let n=w,r=v.current,a=E!=null&&r!==null&&r.complete&&r.naturalHeight!==0&&r.naturalWidth!==0;a&&E.excavation!=null&&(n=EWe(w,E.excavation));let c=window.devicePixelRatio||1;e.height=e.width=i*c;let l=i/T*c;t.scale(l,l),t.fillStyle=o,t.fillRect(0,0,T,T),t.fillStyle=s,AWe?t.fill(new Path2D(TWe(n,C))):w.forEach(function(e,n){e.forEach(function(e,r){e&&t.fillRect(r+C,n+C,1,1)})}),E&&(t.globalAlpha=E.opacity),a&&t.drawImage(r,E.x+C,E.y+C,E.w,E.h)}}),y.useEffect(()=>{S(!1)},[g]);let D=J8({height:i,width:i},m),O=null;return g!=null&&(O=y.createElement(`img`,{src:g,key:g,style:{display:`none`},onLoad:()=>{S(!0)},ref:v,crossOrigin:E?.crossOrigin})),y.createElement(y.Fragment,null,y.createElement(`canvas`,J8({style:D,height:i,width:i,ref:b,role:`img`},h)),O)});jWe.displayName=`QRCodeCanvas`;var MWe=y.forwardRef(function(e,t){let n=e,{value:r,size:i=gWe,level:a=_We,bgColor:o=vWe,fgColor:s=yWe,includeMargin:c=bWe,minVersion:l=xWe,boostLevel:u,title:d,marginSize:f,imageSettings:p}=n,m=Y8(n,[`value`,`size`,`level`,`bgColor`,`fgColor`,`includeMargin`,`minVersion`,`boostLevel`,`title`,`marginSize`,`imageSettings`]),{margin:h,cells:g,numCells:_,calculatedImageSettings:v}=kWe({value:r,level:a,minVersion:l,boostLevel:u,includeMargin:c,marginSize:f,imageSettings:p,size:i}),b=g,x=null;p!=null&&v!=null&&(v.excavation!=null&&(b=EWe(g,v.excavation)),x=y.createElement(`image`,{href:p.src,height:v.h,width:v.w,x:v.x+h,y:v.y+h,preserveAspectRatio:`none`,opacity:v.opacity,crossOrigin:v.crossOrigin}));let S=TWe(b,h);return y.createElement(`svg`,J8({height:i,width:i,viewBox:`0 0 ${_} ${_}`,ref:t,role:`img`},m),!!d&&y.createElement(`title`,null,d),y.createElement(`path`,{fill:o,d:`M0,0 h${_}v${_}H0z`,shapeRendering:`crispEdges`}),y.createElement(`path`,{fill:s,d:S,shapeRendering:`crispEdges`}),x)});MWe.displayName=`QRCodeSVG`;function NWe(e,t){return`bambuddy://config?v=1&url=${encodeURIComponent(e)}&key=${encodeURIComponent(t)}`}function PWe({apiKey:e,baseUrl:t,onClose:n}){let{t:r}=U(),i=NWe(t??window.location.origin,e);return(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&n()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[n]),(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:n,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-sm`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:r(`settings.apiKeyQrTitle`)}),(0,G.jsx)(`button`,{onClick:n,className:`text-bambu-gray hover:text-white transition-colors`,"aria-label":r(`common.close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-6 flex flex-col items-center`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4 text-center`,children:r(`settings.apiKeyQrCaption`)}),(0,G.jsx)(`div`,{className:`bg-white p-4 rounded-lg mb-4`,children:(0,G.jsx)(MWe,{value:i,size:256})}),(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-xs text-amber-700 dark:text-amber-400 mb-4`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 flex-shrink-0 mt-0.5`}),(0,G.jsx)(`span`,{children:r(`settings.apiKeyQrWarning`)})]}),(0,G.jsx)(Q,{onClick:n,className:`w-full`,children:r(`common.close`)})]})]})})}var FWe=300,Q8=2;function IWe({onSuccess:e}){let{t}=U(),n=co(),[r,i]=(0,y.useState)(``),[a,o]=(0,y.useState)(``),[s,c]=(0,y.useState)(null),[l,u]=(0,y.useState)(null);(0,y.useEffect)(()=>{let e=r.trim();if(e.length<Q8){o(``);return}let t=setTimeout(()=>o(e),FWe);return()=>clearTimeout(t)},[r]),(0,y.useEffect)(()=>{c(null),u(null)},[a]);let d=K({queryKey:[`ldap-search`,a],queryFn:()=>Z.searchLDAPDirectory(a),enabled:a.length>=Q8,staleTime:3e4}),f=q({mutationFn:e=>Z.provisionLDAPUser(e),onSuccess:t=>{n.invalidateQueries({queryKey:[`users`]}),e(t)},onError:e=>{u(e.message||t(`users.modal.ldapErrorProvision`))}}),p=(0,y.useMemo)(()=>d.data?.find(e=>e.dn===s)??null,[d.data,s]),m=r.trim().length>0&&r.trim().length<Q8,h=d.isFetching&&a.length>=Q8,g=!!d.data&&d.data.length>0,_=!h&&!!d.data&&d.data.length===0&&a.length>=Q8;return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:t(`users.modal.ldapSearchLabel`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`w-4 h-4 text-bambu-gray absolute left-3 top-1/2 -translate-y-1/2`}),(0,G.jsx)(`input`,{type:`text`,value:r,onChange:e=>i(e.target.value),className:`w-full pl-9 pr-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:t(`users.modal.ldapSearchPlaceholder`),autoComplete:`off`})]}),m&&(0,G.jsx)(`p`,{className:`mt-1 text-xs text-bambu-gray`,children:t(`users.modal.ldapMinChars`)})]}),(0,G.jsxs)(`div`,{className:`min-h-[8rem] max-h-64 overflow-y-auto bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg`,children:[h&&(0,G.jsxs)(`div`,{className:`flex items-center justify-center py-8 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin mr-2`}),(0,G.jsx)(`span`,{children:t(`users.modal.ldapSearching`)})]}),_&&(0,G.jsx)(`div`,{className:`flex items-center justify-center py-8 text-bambu-gray text-sm`,children:t(`users.modal.ldapNoResults`)}),d.isError&&(0,G.jsx)(`div`,{className:`px-3 py-4 text-sm text-red-700 dark:text-red-400`,children:d.error instanceof Error?d.error.message:t(`users.modal.ldapSearchError`)}),!h&&g&&(0,G.jsx)(`ul`,{className:`divide-y divide-bambu-dark-tertiary`,children:d.data.map(e=>(0,G.jsx)(LWe,{result:e,selected:s===e.dn,onSelect:()=>c(e.dn)},e.dn))}),!h&&!d.data&&!d.isError&&(0,G.jsx)(`div`,{className:`flex items-center justify-center py-8 text-bambu-gray text-sm`,children:t(`users.modal.ldapTypeToSearch`)})]}),p&&(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary/50 border border-bambu-green/20 rounded-lg p-3 space-y-1`,children:[(0,G.jsxs)(`p`,{className:`text-sm text-white`,children:[(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[t(`users.modal.ldapSelectedLabel`),`: `]}),(0,G.jsx)(`span`,{className:`font-medium`,children:p.username}),p.display_name&&(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[` — `,p.display_name]})]}),p.email&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:p.email}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray break-all`,children:p.dn})]}),l&&(0,G.jsx)(`div`,{className:`bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 rounded-lg p-3`,children:(0,G.jsx)(`p`,{className:`text-sm text-red-700 dark:text-red-400`,children:l})}),(0,G.jsx)(`div`,{className:`flex justify-end`,children:(0,G.jsx)(Q,{onClick:()=>{!p||p.already_provisioned||(u(null),f.mutate(p.username))},disabled:!p||p.already_provisioned||f.isPending,children:f.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),t(`users.modal.ldapProvisioning`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),t(`users.modal.ldapProvision`)]})})})]})}function LWe({result:e,selected:t,onSelect:n}){let{t:r}=U(),i=e.already_provisioned;return(0,G.jsx)(`li`,{children:(0,G.jsxs)(`button`,{type:`button`,onClick:n,disabled:i,className:`w-full text-left px-3 py-2 flex items-center gap-3 transition-colors ${i?`opacity-50 cursor-not-allowed`:t?`bg-bambu-green/10`:`hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`p`,{className:`text-sm text-white truncate`,children:[(0,G.jsx)(`span`,{className:`font-medium`,children:e.username}),e.display_name&&(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[` — `,e.display_name]})]}),e.email&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray truncate`,children:e.email})]}),i&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-xs text-bambu-gray whitespace-nowrap`,children:[(0,G.jsx)(Ss,{className:`w-3.5 h-3.5`}),r(`users.modal.ldapAlreadyProvisioned`)]})]})})}function RWe({formData:e,setFormData:t,groups:n,onClose:r,onCreate:i,isCreating:a,isCreateButtonDisabled:o,ldapEnabled:s=!1,onLdapProvisioned:c}){let{t:l}=U(),[u,d]=(0,y.useState)(`local`);(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&r()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[r]);let f=n=>{t({...e,group_ids:e.group_ids.includes(n)?e.group_ids.filter(e=>e!==n):[...e.group_ids,n]})};return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:r,children:(0,G.jsxs)(Ld,{className:`w-full max-w-md`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex flex-col gap-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Hu,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:l(`users.modal.createUser`)})]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray ml-7`,children:l(`users.modal.advancedAuthSubtitle`)||`with Advanced Authentication`})]}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:r,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]})}),(0,G.jsxs)(zd,{children:[s&&(0,G.jsxs)(`div`,{className:`mb-4 flex items-center gap-1 p-1 bg-bambu-dark-secondary rounded-lg`,role:`tablist`,"aria-label":l(`users.modal.tabsAriaLabel`),children:[(0,G.jsx)(`button`,{type:`button`,role:`tab`,"aria-selected":u===`local`,onClick:()=>d(`local`),className:`flex-1 px-3 py-2 text-sm rounded-md transition-colors ${u===`local`?`bg-bambu-green/15 text-bambu-green`:`text-bambu-gray hover:text-white`}`,children:l(`users.modal.localTab`)}),(0,G.jsx)(`button`,{type:`button`,role:`tab`,"aria-selected":u===`ldap`,onClick:()=>d(`ldap`),className:`flex-1 px-3 py-2 text-sm rounded-md transition-colors ${u===`ldap`?`bg-bambu-green/15 text-bambu-green`:`text-bambu-gray hover:text-white`}`,children:l(`users.modal.ldapTab`)})]}),u===`ldap`&&s?(0,G.jsx)(IWe,{onSuccess:e=>{c?.(e)}}):(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:[l(`users.form.username`),` `,(0,G.jsx)(`span`,{className:`text-red-600 dark:text-red-400`,children:`*`})]}),(0,G.jsx)(`input`,{type:`text`,value:e.username,onChange:n=>t({...e,username:n.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:l(`users.form.usernamePlaceholder`),autoComplete:`username`,required:!0})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:[l(`users.form.email`)||`Email`,` `,(0,G.jsx)(`span`,{className:`text-red-600 dark:text-red-400`,children:`*`})]}),(0,G.jsx)(`input`,{type:`email`,value:e.email,onChange:n=>t({...e,email:n.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:l(`users.form.emailPlaceholder`)||`user@example.com`,required:!0})]}),(0,G.jsx)(`div`,{className:`bg-bambu-dark-secondary/50 border border-bambu-green/20 rounded-lg p-3`,children:(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:l(`users.form.autoGeneratedPassword`)||`A secure password will be automatically generated and emailed to the user.`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:l(`users.form.groups`)}),(0,G.jsxs)(`div`,{className:`space-y-2 max-h-40 overflow-y-auto p-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg`,children:[n.map(t=>(0,G.jsxs)(`label`,{className:`flex items-center gap-3 px-2 py-1.5 rounded hover:bg-bambu-dark-tertiary cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:e.group_ids.includes(t.id),onChange:()=>f(t.id),className:`w-4 h-4 rounded border-bambu-gray text-bambu-green focus:ring-bambu-green focus:ring-offset-0 bg-bambu-dark`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:t.name}),t.is_system&&(0,G.jsxs)(`span`,{className:`text-xs text-yellow-700 dark:text-yellow-400`,children:[`(`,l(`users.system`),`)`]})]},t.id)),n.length===0&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:l(`users.noGroupsAvailable`)})]})]})]}),(0,G.jsxs)(`div`,{className:`mt-6 flex justify-end gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:r,children:l(`users.modal.cancel`)}),u===`local`&&(0,G.jsx)(Q,{onClick:i,disabled:o,children:a?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),l(`users.modal.creating`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),l(`users.modal.createUser`)]})})]})]})]})})}function zWe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),[r,i]=(0,y.useState)(!1),[a,o]=(0,y.useState)(``),[s,c]=(0,y.useState)(`auto`),[l,u]=(0,y.useState)(!1),[d,f]=(0,y.useState)(!0),[p,m]=(0,y.useState)(!0),[h,g]=(0,y.useState)(`all`),[_,v]=(0,y.useState)(!1),[b,x]=(0,y.useState)(!1),[S,C]=(0,y.useState)(!1),[w,T]=(0,y.useState)(!1),{data:E,isLoading:D}=K({queryKey:[`spoolman-settings`],queryFn:Z.getSpoolmanSettings}),{data:O,isLoading:k,refetch:A}=K({queryKey:[`spoolman-status`],queryFn:Z.getSpoolmanStatus,refetchInterval:3e4}),{data:j}=K({queryKey:[`printers`],queryFn:Z.getPrinters});(0,y.useEffect)(()=>{E&&(i(E.spoolman_enabled===`true`),o(E.spoolman_url||``),c(E.spoolman_sync_mode||`auto`),u(E.spoolman_disable_weight_sync===`true`),f(E.spoolman_report_partial_usage!==`false`),m(E.auto_add_unknown_rfid!==`false`),v(!0))},[E]),(0,y.useEffect)(()=>{if(!(!_||!E)&&(E.spoolman_enabled===`true`!==r||(E.spoolman_url||``)!==a||(E.spoolman_sync_mode||`auto`)!==s||E.spoolman_disable_weight_sync===`true`!==l||E.spoolman_report_partial_usage!==`false`!==d||E.auto_add_unknown_rfid!==`false`!==p)){let e=setTimeout(()=>{M.mutate()},500);return()=>clearTimeout(e)}},[r,a,s,l,d,p,_]);let M=q({mutationFn:()=>Z.updateSpoolmanSettings({spoolman_enabled:r?`true`:`false`,spoolman_url:a,spoolman_sync_mode:s,spoolman_disable_weight_sync:l?`true`:`false`,spoolman_report_partial_usage:d?`true`:`false`,auto_add_unknown_rfid:p?`true`:`false`}),onSuccess:()=>{t.invalidateQueries({queryKey:[`spoolman-settings`]}),t.invalidateQueries({queryKey:[`spoolman-status`]}),t.invalidateQueries({queryKey:[`spool-assignments`]}),t.invalidateQueries({queryKey:[`settings`]}),t.invalidateQueries({queryKey:[`spoolman-inventory-filaments`]}),n(e(`settings.toast.settingsSaved`))},onError:()=>{n(e(`settings.toast.saveFailed`),`error`)}}),N=q({mutationFn:Z.connectSpoolman,onSuccess:()=>{A()},onError:()=>{n(e(`settings.toast.saveFailed`),`error`)}}),P=q({mutationFn:Z.syncAllPrintersAms,onSuccess:t=>{n(e(`settings.spoolmanAmsSyncSuccess`,{synced:t.synced_count,skipped:0}),`success`)},onError:()=>{n(e(`settings.toast.saveFailed`),`error`)}}),F=q({mutationFn:e=>Z.syncPrinterAms(e),onSuccess:t=>{n(e(`settings.spoolmanAmsSyncSuccess`,{synced:t.synced_count,skipped:0}),`success`)},onError:()=>{n(e(`settings.toast.saveFailed`),`error`)}}),I=()=>{h===`all`?P.mutate():F.mutate(h)},L=q({mutationFn:Z.syncWeightsFromAms,onSuccess:r=>{t.invalidateQueries({queryKey:[`spools`]}),t.invalidateQueries({queryKey:[`inventory-spools`]}),n(e(`settings.amsSyncSuccess`,{synced:r.synced,skipped:r.skipped}),`success`),C(!1)},onError:()=>{n(e(`settings.amsSyncError`),`error`),C(!1)}}),R=q({mutationFn:Z.syncSpoolmanAmsWeights,onSuccess:r=>{t.invalidateQueries({queryKey:[`spoolman-inventory-spools`]}),n(e(`settings.spoolmanAmsSyncSuccess`,{synced:r.synced,skipped:r.skipped}),`success`),T(!1)},onError:t=>{t instanceof od&&t.status===503?n(e(`settings.spoolmanAmsSyncErrorUnreachable`),`error`):t instanceof od&&t.status===400?n(e(`settings.spoolmanAmsSyncErrorNotConfigured`),`error`):n(e(`settings.spoolmanAmsSyncError`),`error`),T(!1)}}),z=P.isPending||F.isPending,B=h===`all`?P.data:F.data,V=h===`all`?P.isSuccess:F.isSuccess;return D?(0,G.jsxs)(Ld,{id:`card-spoolman`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Ws,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`settings.filamentTracking`)})]})}),(0,G.jsx)(zd,{children:(0,G.jsx)(`div`,{className:`flex justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})})})]}):(0,G.jsxs)(Ld,{id:`card-spoolman`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Ws,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`settings.filamentTracking`)})]}),M.isPending&&(0,G.jsx)(Y,{className:`w-4 h-4 text-bambu-green animate-spin`})]})}),(0,G.jsxs)(zd,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`settings.filamentTrackingDesc`)}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>i(!1),className:`p-3 rounded-lg border-2 text-left transition-colors ${r?`border-bambu-dark-tertiary bg-bambu-dark hover:border-bambu-gray/50`:`border-bambu-green bg-bambu-green/10`}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1.5`,children:[(0,G.jsx)(Sl,{className:`w-4 h-4 ${r?`text-bambu-gray`:`text-bambu-green`}`}),(0,G.jsx)(`span`,{className:`text-sm font-medium ${r?`text-bambu-gray`:`text-white`}`,children:e(`settings.trackingModeBuiltIn`)})]}),(0,G.jsx)(`p`,{className:`text-xs ${r?`text-bambu-gray/60`:`text-bambu-gray`}`,children:e(`settings.trackingModeBuiltInDesc`)}),!r&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1 mt-2`,children:[(0,G.jsx)(fs,{className:`w-3 h-3 text-bambu-green`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-green`,children:e(`common.enabled`)})]})]}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>i(!0),className:`p-3 rounded-lg border-2 text-left transition-colors ${r?`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary bg-bambu-dark hover:border-bambu-gray/50`}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1.5`,children:[(0,G.jsx)(nc,{className:`w-4 h-4 ${r?`text-bambu-green`:`text-bambu-gray`}`}),(0,G.jsx)(`span`,{className:`text-sm font-medium ${r?`text-white`:`text-bambu-gray`}`,children:`Spoolman`})]}),(0,G.jsx)(`p`,{className:`text-xs ${r?`text-bambu-gray`:`text-bambu-gray/60`}`,children:e(`settings.trackingModeSpoolmanDesc`)}),r&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1 mt-2`,children:[(0,G.jsx)(fs,{className:`w-3 h-3 text-bambu-green`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-green`,children:e(`common.enabled`)})]})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`pr-4`,children:[(0,G.jsx)(`p`,{className:`text-white`,children:e(`settings.autoAddUnknownRfid`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`settings.autoAddUnknownRfidDesc`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:p,onChange:e=>m(e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),!r&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsx)(`div`,{className:`p-3 bg-bambu-green/5 border border-bambu-green/20 rounded-lg`,children:(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Uc,{className:`w-4 h-4 text-bambu-green flex-shrink-0 mt-0.5`}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray`,children:(0,G.jsxs)(`ul`,{className:`list-disc list-inside space-y-0.5`,children:[(0,G.jsx)(`li`,{children:e(`settings.builtInFeatureRfid`)}),(0,G.jsx)(`li`,{children:e(`settings.builtInFeatureUsage`)}),(0,G.jsx)(`li`,{children:e(`settings.builtInFeatureCatalog`)}),(0,G.jsx)(`li`,{children:e(`settings.builtInFeatureThirdParty`)})]})})]})}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>C(!0),disabled:L.isPending,children:[L.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 mr-2 animate-spin`}):(0,G.jsx)(Vl,{className:`w-4 h-4 mr-2`}),e(`settings.amsSyncButton`)]})]}),r&&(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`div`,{className:`p-3 bg-blue-50 dark:bg-blue-500/10 border border-blue-300 dark:border-blue-500/30 rounded-lg`,children:(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Uc,{className:`w-4 h-4 text-blue-600 dark:text-blue-400 flex-shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{className:`text-xs text-blue-700 dark:text-blue-300`,children:[(0,G.jsx)(`p`,{className:`font-medium mb-1`,children:e(`settings.howSyncWorks`)}),(0,G.jsxs)(`ul`,{className:`list-disc list-inside space-y-0.5 text-blue-700/90 dark:text-blue-300/80`,children:[(0,G.jsx)(`li`,{children:e(`settings.syncInfoRfidOnly`)}),(0,G.jsx)(`li`,{children:e(`settings.syncInfoAutoCreate`)}),(0,G.jsx)(`li`,{children:e(`settings.syncInfoThirdPartySkipped`)})]}),(0,G.jsx)(`p`,{className:`font-medium mt-2 mb-1`,children:e(`settings.linkingExistingSpools`)}),(0,G.jsx)(`p`,{className:`text-blue-700/90 dark:text-blue-300/80`,children:e(`settings.linkingExistingSpoolsDesc`)})]})]})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:e(`settings.spoolmanUrl`)}),(0,G.jsx)(`input`,{type:`text`,placeholder:`http://192.168.1.100:7912`,value:a,onChange:e=>o(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray/50 focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`settings.spoolmanUrlHint`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:e(`settings.syncMode`)}),(0,G.jsxs)(`select`,{value:s,onChange:e=>c(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`auto`,children:e(`settings.syncModeAuto`)}),(0,G.jsx)(`option`,{value:`manual`,children:e(`settings.syncModeManual`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(s===`auto`?`settings.syncModeAutoDesc`:`settings.syncModeManualDesc`)})]}),s===`auto`&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:e(`spoolman.disableWeightSync`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`spoolman.disableWeightSyncDesc`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:l,onChange:e=>u(e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),l&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:e(`spoolman.reportPartialUsage`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`spoolman.reportPartialUsageDesc`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:d,onChange:e=>f(e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[e(`settings.status`),`:`]}),k?(0,G.jsx)(Y,{className:`w-4 h-4 text-bambu-gray animate-spin`}):O?.connected?(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-sm text-green-500`,children:[(0,G.jsx)(fs,{className:`w-4 h-4`}),e(`settings.spoolmanConnected`)]}):(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-sm text-red-500`,children:[(0,G.jsx)(td,{className:`w-4 h-4`}),e(`settings.spoolmanDisconnected`)]})]}),(0,G.jsx)(`div`,{className:`flex gap-2`,children:!O?.connected&&(0,G.jsxs)(Q,{size:`sm`,onClick:()=>N.mutate(),disabled:N.isPending||!a,children:[N.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Yc,{className:`w-4 h-4`}),e(`settings.connect`)]})})]}),N.isError&&(0,G.jsx)(`div`,{className:`mb-3 p-2 bg-red-100 dark:bg-red-500/20 border border-red-300 dark:border-red-500/50 rounded text-sm text-red-700 dark:text-red-400`,children:N.error.message}),O?.connected&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:e(`settings.syncAmsData`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:e(`settings.syncAmsDataDesc`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsxs)(`select`,{value:h,onChange:e=>g(e.target.value===`all`?`all`:Number(e.target.value)),className:`w-full px-3 py-2 pr-8 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:[(0,G.jsx)(`option`,{value:`all`,children:e(`settings.allPrinters`)}),j?.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]}),(0,G.jsx)(ps,{className:`absolute right-2 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:I,disabled:z,children:[z?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Vl,{className:`w-4 h-4`}),e(`spoolman.sync`)]})]})]}),O?.connected&&(0,G.jsx)(`div`,{className:`mt-4 pt-4 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:e(`settings.spoolmanAmsSyncButton`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:e(`settings.spoolmanAmsSyncMessage`)})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>T(!0),disabled:R.isPending,children:[R.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Vl,{className:`w-4 h-4`}),R.isPending?e(`settings.spoolmanAmsSyncing`):e(`settings.spoolmanAmsSyncButton`)]})]})}),V&&B&&(0,G.jsxs)(`div`,{className:`mt-3 space-y-2`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded text-sm ${B.success?`bg-green-100 dark:bg-green-500/20 border border-green-300 dark:border-green-500/50 text-green-700 dark:text-green-400`:`bg-yellow-100 dark:bg-yellow-500/20 border border-yellow-300 dark:border-yellow-500/50 text-yellow-700 dark:text-yellow-400`}`,children:B.success?`Synced ${B.synced_count} spool${B.synced_count===1?``:`s`} successfully`:`Synced ${B.synced_count} spool${B.synced_count===1?``:`s`} with ${B.errors.length} error${B.errors.length===1?``:`s`}`}),B.skipped_count>0&&(0,G.jsxs)(`div`,{className:`p-2 bg-amber-50 dark:bg-amber-500/10 border border-amber-300 dark:border-amber-500/30 rounded text-sm`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-amber-700 dark:text-amber-400 mb-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(Iu,{className:`w-3.5 h-3.5`}),(0,G.jsxs)(`span`,{className:`font-medium`,children:[B.skipped_count,` spool`,B.skipped_count===1?``:`s`,` skipped`]})]}),B.skipped_count>5&&(0,G.jsx)(`button`,{onClick:()=>x(!b),className:`text-xs text-amber-700 dark:text-amber-400 hover:text-amber-800 dark:hover:text-amber-300 underline`,children:b?`Show less`:`Show all`})]}),(0,G.jsxs)(`ul`,{className:`text-xs text-amber-700/90 dark:text-amber-300/80 space-y-0.5`,children:[(b?B.skipped:B.skipped.slice(0,5)).map((e,t)=>(0,G.jsxs)(`li`,{className:`flex items-center gap-2`,children:[e.color&&(0,G.jsx)(`span`,{className:`w-3 h-3 rounded-full border border-black/20`,style:{backgroundColor:`#${e.color}`}}),(0,G.jsx)(`span`,{children:e.location}),(0,G.jsxs)(`span`,{className:`text-amber-700/70 dark:text-amber-300/60`,children:[`- `,e.reason]})]},t)),!b&&B.skipped_count>5&&(0,G.jsxs)(`li`,{className:`text-amber-700/70 dark:text-amber-300/60 italic`,children:[`...and `,B.skipped_count-5,` more`]})]})]}),B.errors.length>0&&(0,G.jsxs)(`div`,{className:`p-2 bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 rounded text-sm`,children:[(0,G.jsx)(`div`,{className:`text-red-700 dark:text-red-400 font-medium mb-1`,children:`Errors:`}),(0,G.jsx)(`ul`,{className:`text-xs text-red-700/90 dark:text-red-300/80 space-y-0.5`,children:B.errors.map((e,t)=>(0,G.jsx)(`li`,{children:e},t))})]})]})]})]})]}),S&&(0,G.jsx)(rf,{title:e(`settings.amsSyncTitle`),message:e(`settings.amsSyncMessage`),confirmText:e(`settings.amsSyncButton`),variant:`warning`,isLoading:L.isPending,loadingText:e(`settings.amsSyncing`),onConfirm:()=>L.mutate(),onCancel:()=>C(!1)}),w&&(0,G.jsx)(rf,{title:e(`settings.spoolmanAmsSyncTitle`),message:e(`settings.spoolmanAmsSyncMessage`),confirmText:e(`settings.spoolmanAmsSyncButton`),variant:`warning`,isLoading:R.isPending,loadingText:e(`settings.spoolmanAmsSyncing`),onConfirm:()=>R.mutate(),onCancel:()=>T(!1)})]})}function BWe(){let{t:e}=U(),{showToast:t}=Gd(),[n,r]=(0,y.useState)([]),[i,a]=(0,y.useState)(!0),[o,s]=(0,y.useState)(``),c=(0,y.useRef)(null),[l,u]=(0,y.useState)(!1),[d,f]=(0,y.useState)(null),[p,m]=(0,y.useState)(``),[h,g]=(0,y.useState)(``),[_,v]=(0,y.useState)(!1),[b,x]=(0,y.useState)(new Set),[S,C]=(0,y.useState)(!1),[w,T]=(0,y.useState)(null),[E,D]=(0,y.useState)(!1),O=(0,y.useCallback)(async()=>{try{r(await Z.getSpoolCatalog())}catch(n){console.error(`SpoolCatalogSettings.loadCatalog failed:`,n),t(e(`settings.catalog.loadFailed`),`error`)}finally{a(!1)}},[t,e]);(0,y.useEffect)(()=>{O()},[O]);let k=n.filter(e=>e.name.toLowerCase().includes(o.toLowerCase())),A=async()=>{if(!p.trim()||!h){t(e(`settings.catalog.nameWeightRequired`),`error`);return}v(!0);try{let n=await Z.addCatalogEntry({name:p.trim(),weight:parseInt(h)});r(e=>[...e,n].sort((e,t)=>e.name.localeCompare(t.name))),u(!1),m(``),g(``),t(e(`settings.catalog.entryAdded`),`success`)}catch(n){console.error(`SpoolCatalogSettings.handleAdd failed:`,n),t(e(`settings.catalog.addFailed`),`error`)}finally{v(!1)}},j=e=>{f(e.id),m(e.name),g(e.weight.toString())},M=()=>{f(null),m(``),g(``)},N=async n=>{if(!p.trim()||!h){t(e(`settings.catalog.nameWeightRequired`),`error`);return}v(!0);try{let i=await Z.updateCatalogEntry(n,{name:p.trim(),weight:parseInt(h)});r(e=>e.map(e=>e.id===n?i:e).sort((e,t)=>e.name.localeCompare(t.name))),f(null),m(``),g(``),t(e(`settings.catalog.entryUpdated`),`success`)}catch(n){console.error(`SpoolCatalogSettings.handleUpdate failed:`,n),t(e(`settings.catalog.updateFailed`),`error`)}finally{v(!1)}},P=async()=>{if(w)try{await Z.deleteCatalogEntry(w.id),r(e=>e.filter(e=>e.id!==w.id)),t(e(`settings.catalog.entryDeleted`),`success`)}catch(n){console.error(`SpoolCatalogSettings.handleDelete failed:`,n),t(e(`settings.catalog.deleteFailed`),`error`)}finally{T(null)}},F=async()=>{D(!1),a(!0);try{await Z.resetSpoolCatalog(),await O(),t(e(`settings.catalog.resetSuccess`),`success`)}catch(n){console.error(`SpoolCatalogSettings.handleReset failed:`,n),t(e(`settings.catalog.resetFailed`),`error`),a(!1)}},I=e=>{x(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})};return(0,G.jsxs)(Ld,{id:`card-spool-catalog`,children:[(0,G.jsxs)(Rd,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3`,children:[(0,G.jsx)(Ws,{className:`w-5 h-5 text-bambu-gray`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`settings.catalog.spoolCatalog`)}),(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[`(`,n.length,`)`]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-wrap`,children:[(0,G.jsxs)(`button`,{onClick:()=>{let r=n.map(({name:e,weight:t})=>({name:e,weight:t})),i=new Blob([JSON.stringify(r,null,2)],{type:`application/json`}),a=URL.createObjectURL(i),o=document.createElement(`a`);o.href=a,o.download=`spool-catalog.json`,document.body.appendChild(o),o.click(),document.body.removeChild(o),URL.revokeObjectURL(a),t(e(`settings.catalog.exported`,{count:n.length}),`success`)},className:`px-3 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray hover:text-white transition-colors flex items-center gap-1.5`,title:e(`settings.catalog.exportTooltip`),children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.export`)})]}),(0,G.jsxs)(`button`,{onClick:()=>c.current?.click(),className:`px-3 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray hover:text-white transition-colors flex items-center gap-1.5`,title:e(`settings.catalog.importTooltip`),children:[(0,G.jsx)(Bu,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.import`)})]}),(0,G.jsx)(`input`,{ref:c,type:`file`,accept:`.json`,className:`hidden`,onChange:async i=>{let a=i.target.files?.[0];if(a){try{let i=await a.text(),o=JSON.parse(i);if(!Array.isArray(o))throw Error(`Invalid format`);let s=0,c=0;for(let e of o){if(!e.name||typeof e.weight!=`number`){c++;continue}if(n.some(t=>t.name.toLowerCase()===e.name.toLowerCase())){c++;continue}try{let t=await Z.addCatalogEntry({name:e.name,weight:e.weight});r(e=>[...e,t].sort((e,t)=>e.name.localeCompare(t.name))),s++}catch(e){console.error(`SpoolCatalogSettings import item failed:`,e),c++}}t(e(`settings.catalog.imported`,{added:s,skipped:c}),`success`)}catch(n){console.error(`SpoolCatalogSettings.handleImport failed:`,n),t(e(`settings.catalog.importFailed`),`error`)}c.current&&(c.current.value=``)}}}),(0,G.jsxs)(`button`,{onClick:()=>D(!0),className:`px-3 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray hover:text-white transition-colors flex items-center gap-1.5`,title:e(`settings.catalog.resetTooltip`),children:[(0,G.jsx)(Ul,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.reset`)})]}),(0,G.jsxs)(`button`,{onClick:()=>u(!0),className:`px-3 py-1.5 text-sm bg-bambu-green text-white rounded-lg hover:bg-bambu-green/80 transition-colors flex items-center gap-1.5`,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.add`)})]})]}),b.size>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mt-2 px-3 py-2 bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 rounded-lg`,children:[(0,G.jsx)(`span`,{className:`text-sm text-red-700 dark:text-red-400`,children:e(`settings.catalog.selectedCount`,{count:b.size})}),(0,G.jsxs)(`button`,{onClick:()=>C(!0),className:`ml-auto px-3 py-1.5 text-sm bg-red-500 text-white rounded-lg hover:bg-red-600 transition-colors flex items-center gap-1.5`,children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),e(`settings.catalog.deleteSelected`)]}),(0,G.jsx)(`button`,{onClick:()=>x(new Set),className:`px-3 py-1.5 text-sm text-bambu-gray hover:text-white transition-colors`,children:e(`common.cancel`)})]})]}),(0,G.jsxs)(zd,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`settings.catalog.spoolCatalogDescription`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,className:`w-full pl-10 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`,placeholder:e(`settings.catalog.searchCatalog`),value:o,onChange:e=>s(e.target.value)})]}),l&&(0,G.jsxs)(`div`,{className:`p-4 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white mb-3`,children:e(`settings.catalog.addNewEntry`)}),(0,G.jsxs)(`div`,{className:`flex gap-2 items-center`,children:[(0,G.jsx)(`div`,{className:`flex-1 min-w-0`,children:(0,G.jsx)(`input`,{type:`text`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`,placeholder:e(`settings.catalog.namePlaceholder`),value:p,onChange:e=>m(e.target.value)})}),(0,G.jsx)(`input`,{type:`number`,className:`w-20 px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white text-center focus:border-bambu-green focus:outline-none`,placeholder:`g`,value:h,onChange:e=>g(e.target.value)}),(0,G.jsx)(`span`,{className:`text-bambu-gray shrink-0`,children:`g`}),(0,G.jsxs)(`button`,{onClick:A,disabled:_,className:`px-3 py-2 bg-bambu-green text-white rounded-lg hover:bg-bambu-green/80 flex items-center gap-1 shrink-0`,children:[_?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(fs,{className:`w-4 h-4`}),e(`common.add`)]}),(0,G.jsx)(`button`,{onClick:()=>{u(!1),m(``),g(``)},className:`p-2 rounded-lg text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]})]}),i?(0,G.jsxs)(`div`,{className:`flex items-center justify-center py-8 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-5 h-5 animate-spin mr-2`}),e(`common.loading`)]}):(0,G.jsx)(`div`,{className:`max-h-[600px] overflow-y-auto border border-bambu-dark-tertiary rounded-lg`,children:(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{className:`bg-bambu-dark sticky top-0`,children:(0,G.jsxs)(`tr`,{children:[(0,G.jsx)(`th`,{className:`px-2 py-2 w-10`,children:(0,G.jsx)(`input`,{type:`checkbox`,checked:k.length>0&&b.size===k.length,onChange:()=>{b.size===k.length?x(new Set):x(new Set(k.map(e=>e.id)))},className:`w-4 h-4 accent-bambu-green cursor-pointer`})}),(0,G.jsx)(`th`,{className:`px-4 py-2 text-left text-bambu-gray font-medium`,children:e(`common.name`)}),(0,G.jsx)(`th`,{className:`px-4 py-2 text-right text-bambu-gray font-medium w-24`,children:e(`settings.catalog.weight`)}),(0,G.jsx)(`th`,{className:`px-4 py-2 text-center text-bambu-gray font-medium w-20`,children:e(`settings.catalog.type`)}),(0,G.jsx)(`th`,{className:`px-4 py-2 w-24`})]})}),(0,G.jsx)(`tbody`,{children:k.length===0?(0,G.jsx)(`tr`,{children:(0,G.jsx)(`td`,{colSpan:5,className:`px-4 py-8 text-center text-bambu-gray`,children:e(o?`settings.catalog.noMatch`:`settings.catalog.empty`)})}):k.map(t=>(0,G.jsx)(`tr`,{className:`border-t border-bambu-dark-tertiary hover:bg-bambu-dark ${b.has(t.id)?`bg-bambu-dark`:``}`,children:d===t.id?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`td`,{className:`px-2 py-2`,children:(0,G.jsx)(`input`,{type:`checkbox`,checked:b.has(t.id),onChange:()=>I(t.id),className:`w-4 h-4 accent-bambu-green cursor-pointer`})}),(0,G.jsx)(`td`,{className:`px-4 py-2`,children:(0,G.jsx)(`input`,{type:`text`,className:`w-full px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white focus:border-bambu-green focus:outline-none`,value:p,onChange:e=>m(e.target.value)})}),(0,G.jsx)(`td`,{className:`px-4 py-2`,children:(0,G.jsx)(`input`,{type:`number`,className:`w-full px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-right focus:border-bambu-green focus:outline-none`,value:h,onChange:e=>g(e.target.value)})}),(0,G.jsx)(`td`,{className:`px-4 py-2 text-center`,children:(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`-`})}),(0,G.jsx)(`td`,{className:`px-4 py-2`,children:(0,G.jsxs)(`div`,{className:`flex justify-end gap-1`,children:[(0,G.jsx)(`button`,{onClick:()=>N(t.id),disabled:_,className:`p-1.5 rounded hover:bg-green-500/20 text-green-500`,children:_?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(fs,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:M,className:`p-1.5 rounded hover:bg-bambu-dark-tertiary text-bambu-gray`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]})})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`td`,{className:`px-2 py-2`,children:(0,G.jsx)(`input`,{type:`checkbox`,checked:b.has(t.id),onChange:()=>I(t.id),className:`w-4 h-4 accent-bambu-green cursor-pointer`})}),(0,G.jsx)(`td`,{className:`px-4 py-2 text-white`,children:t.name}),(0,G.jsxs)(`td`,{className:`px-4 py-2 text-right font-mono text-white`,children:[t.weight,`g`]}),(0,G.jsx)(`td`,{className:`px-4 py-2 text-center`,children:t.is_default?(0,G.jsx)(`span`,{className:`text-xs px-2 py-0.5 rounded bg-bambu-dark-tertiary text-bambu-gray`,children:e(`settings.catalog.default`)}):(0,G.jsx)(`span`,{className:`text-xs px-2 py-0.5 rounded bg-bambu-green/20 text-bambu-green`,children:e(`settings.catalog.custom`)})}),(0,G.jsx)(`td`,{className:`px-4 py-2`,children:(0,G.jsxs)(`div`,{className:`flex justify-end gap-1`,children:[(0,G.jsx)(`button`,{onClick:()=>j(t),className:`p-1.5 rounded hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white`,children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>T(t),className:`p-1.5 rounded bg-red-500/10 hover:bg-red-500/20 text-red-500`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})})]})},t.id))})]})})]}),w&&(0,G.jsx)(rf,{title:e(`settings.catalog.deleteEntry`),message:e(`settings.catalog.deleteConfirm`,{name:w.name}),confirmText:e(`common.delete`),variant:`danger`,onConfirm:P,onCancel:()=>T(null)}),S&&(0,G.jsx)(rf,{title:e(`settings.catalog.deleteSelected`),message:e(`settings.catalog.bulkDeleteConfirm`,{count:b.size}),confirmText:e(`common.delete`),variant:`danger`,onConfirm:async()=>{if(C(!1),b.size!==0)try{let n=await Z.bulkDeleteCatalogEntries([...b]);r(e=>e.filter(e=>!b.has(e.id))),x(new Set),t(e(`settings.catalog.bulkDeleted`,{count:n.deleted}),`success`)}catch(n){console.error(`SpoolCatalogSettings.handleBulkDelete failed:`,n),t(e(`settings.catalog.bulkDeleteFailed`),`error`)}},onCancel:()=>C(!1)}),E&&(0,G.jsx)(rf,{title:e(`settings.catalog.resetCatalog`),message:e(`settings.catalog.resetConfirm`),confirmText:e(`common.reset`),variant:`danger`,onConfirm:F,onCancel:()=>D(!1)})]})}function $8({rgba:e,extraColors:t,effectType:n,subtype:r,className:i=`w-5 h-5`,shape:a=`circle`,style:o,title:s,effectSize:c}){let l=(0,y.useMemo)(()=>SU(t),[t]),u=(0,y.useMemo)(()=>CU({effectSize:c,rgba:e,extraColors:t,effectType:n,subtype:r}),[c,e,t,n,r]),d=u.backgroundImage,f=u.backgroundSize,p=a===`circle`||a===`pill`?`rounded-full`:`rounded`,m=(()=>{if(!e)return;let t=e.replace(/^#/,``);return t.length>=8&&t.substring(6,8).toLowerCase()!==`ff`?`#${t.substring(0,8)}`:`#${t.substring(0,6)}`})(),h=s??(l.length>0?l.join(`, `):m);return(0,G.jsx)(`span`,{"data-testid":`filament-swatch`,className:`${i} ${p} border border-black/20 inline-block flex-shrink-0`,style:{backgroundImage:d,backgroundSize:f,...o},title:h})}function VWe(){let{t:e}=U(),{showToast:t}=Gd(),[n,r]=(0,y.useState)([]),[i,a]=(0,y.useState)(!0),[o,s]=(0,y.useState)(``),[c,l]=(0,y.useState)(``),u=(0,y.useRef)(null),[d,f]=(0,y.useState)(!1),[p,m]=(0,y.useState)(null),[h,g]=(0,y.useState)(``),[_,v]=(0,y.useState)(``),[b,x]=(0,y.useState)(`#FFFFFF`),[S,C]=(0,y.useState)(``),[w,T]=(0,y.useState)(``),[E,D]=(0,y.useState)(``),[O,k]=(0,y.useState)(!1),[A,j]=(0,y.useState)(new Set),[M,N]=(0,y.useState)(!1),[P,F]=(0,y.useState)(!1),[I,L]=(0,y.useState)(null),[R,z]=(0,y.useState)(null),[B,V]=(0,y.useState)(!1),ee=(0,y.useCallback)(async()=>{try{r(await Z.getColorCatalog())}catch{t(e(`settings.colorCatalog.loadFailed`),`error`)}finally{a(!1)}},[t,e]);(0,y.useEffect)(()=>{ee()},[ee]);let te=[...new Set(n.map(e=>e.manufacturer))].sort(),ne=n.filter(e=>{let t=o===``||e.manufacturer.toLowerCase().includes(o.toLowerCase())||e.color_name.toLowerCase().includes(o.toLowerCase())||(e.material?.toLowerCase().includes(o.toLowerCase())??!1),n=c===``||e.manufacturer===c;return t&&n}),re=()=>{g(``),v(``),x(`#FFFFFF`),C(``),T(``),D(``)},ie=async()=>{if(!h.trim()||!_.trim()||!b){t(e(`settings.colorCatalog.fieldsRequired`),`error`);return}k(!0);try{let n=await Z.addColorEntry({manufacturer:h.trim(),color_name:_.trim(),hex_color:b,material:S.trim()||null,extra_colors:w.trim()||null,effect_type:E.trim()||null});r(e=>[...e,n].sort((e,t)=>e.manufacturer.localeCompare(t.manufacturer)||(e.material||``).localeCompare(t.material||``)||e.color_name.localeCompare(t.color_name))),f(!1),re(),t(e(`settings.colorCatalog.colorAdded`),`success`)}catch{t(e(`settings.colorCatalog.addFailed`),`error`)}finally{k(!1)}},ae=e=>{m(e.id),g(e.manufacturer),v(e.color_name),x(e.hex_color),C(e.material||``),T(e.extra_colors||``),D(e.effect_type||``)},oe=()=>{m(null),re()},se=async n=>{if(!h.trim()||!_.trim()||!b){t(e(`settings.colorCatalog.fieldsRequired`),`error`);return}k(!0);try{let i=await Z.updateColorEntry(n,{manufacturer:h.trim(),color_name:_.trim(),hex_color:b,material:S.trim()||null,extra_colors:w.trim()||null,effect_type:E.trim()||null});r(e=>e.map(e=>e.id===n?i:e).sort((e,t)=>e.manufacturer.localeCompare(t.manufacturer)||(e.material||``).localeCompare(t.material||``)||e.color_name.localeCompare(t.color_name))),m(null),re(),t(e(`settings.colorCatalog.colorUpdated`),`success`)}catch{t(e(`settings.colorCatalog.updateFailed`),`error`)}finally{k(!1)}},H=async()=>{if(R)try{await Z.deleteColorEntry(R.id),r(e=>e.filter(e=>e.id!==R.id)),t(e(`settings.colorCatalog.colorDeleted`),`success`)}catch{t(e(`settings.colorCatalog.deleteFailed`),`error`)}finally{z(null)}},ce=async()=>{V(!1),a(!0);try{await Z.resetColorCatalog(),await ee(),t(e(`settings.colorCatalog.resetSuccess`),`success`)}catch{t(e(`settings.colorCatalog.resetFailed`),`error`),a(!1)}},le=async()=>{F(!0),L(null);try{let n={},r=ld();r&&(n.Authorization=`Bearer ${r}`);let i=await fetch(`/api/v1/inventory/colors/sync`,{method:`POST`,headers:n});if(!i.ok)throw Error(`Failed to start sync`);let a=i.body?.getReader();if(!a)throw Error(`No response body`);let o=new TextDecoder,s=``;for(;;){let{done:n,value:r}=await a.read();if(n)break;s+=o.decode(r,{stream:!0});let i=s.split(`
-`);s=i.pop()||``;for(let n of i)if(n.startsWith(`data: `))try{let r=JSON.parse(n.slice(6));r.type===`progress`?L({fetched:r.total_fetched,total:r.total_available}):r.type===`complete`?r.added===0?t(e(`settings.colorCatalog.syncUpToDate`,{count:r.total_fetched}),`success`):t(e(`settings.colorCatalog.syncComplete`,{added:r.added,skipped:r.skipped}),`success`):r.type===`error`&&t(`${e(`settings.colorCatalog.syncError`)}: ${r.error}`,`error`)}catch{}}await ee()}catch{t(e(`settings.colorCatalog.syncFailed`),`error`)}finally{F(!1),L(null)}},ue=e=>{j(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})};return(0,G.jsxs)(Ld,{id:`card-color-catalog`,children:[(0,G.jsxs)(Rd,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3`,children:[(0,G.jsx)(Cl,{className:`w-5 h-5 text-bambu-gray`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`settings.colorCatalog.title`)}),(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[`(`,n.length,`)`]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-wrap`,children:[(0,G.jsxs)(`button`,{onClick:()=>{let r=n.map(({manufacturer:e,color_name:t,hex_color:n,material:r,extra_colors:i,effect_type:a})=>({manufacturer:e,color_name:t,hex_color:n,material:r,extra_colors:i,effect_type:a})),i=new Blob([JSON.stringify(r,null,2)],{type:`application/json`}),a=URL.createObjectURL(i),o=document.createElement(`a`);o.href=a,o.download=`color-catalog.json`,document.body.appendChild(o),o.click(),document.body.removeChild(o),URL.revokeObjectURL(a),t(e(`settings.colorCatalog.exported`,{count:n.length}),`success`)},className:`px-3 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray hover:text-white transition-colors flex items-center gap-1.5`,children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.export`)})]}),(0,G.jsxs)(`button`,{onClick:()=>u.current?.click(),className:`px-3 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray hover:text-white transition-colors flex items-center gap-1.5`,children:[(0,G.jsx)(Bu,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.import`)})]}),(0,G.jsx)(`input`,{ref:u,type:`file`,accept:`.json`,className:`hidden`,onChange:async i=>{let a=i.target.files?.[0];if(a){try{let i=await a.text(),o=JSON.parse(i);if(!Array.isArray(o))throw Error(`Invalid format`);let s=0,c=0;for(let e of o){if(!e.manufacturer||!e.color_name||!e.hex_color){c++;continue}if(n.some(t=>t.manufacturer.toLowerCase()===e.manufacturer.toLowerCase()&&t.color_name.toLowerCase()===e.color_name.toLowerCase()&&(t.material||``).toLowerCase()===(e.material||``).toLowerCase())){c++;continue}try{let t=await Z.addColorEntry({manufacturer:e.manufacturer,color_name:e.color_name,hex_color:e.hex_color,material:e.material||null,extra_colors:e.extra_colors||null,effect_type:e.effect_type||null});r(e=>[...e,t].sort((e,t)=>e.manufacturer.localeCompare(t.manufacturer)||(e.material||``).localeCompare(t.material||``)||e.color_name.localeCompare(t.color_name))),s++}catch{c++}}t(e(`settings.colorCatalog.imported`,{added:s,skipped:c}),`success`)}catch{t(e(`settings.colorCatalog.importFailed`),`error`)}u.current&&(u.current.value=``)}}}),(0,G.jsxs)(`button`,{onClick:le,disabled:P,className:`px-3 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray hover:text-white transition-colors flex items-center gap-1.5`,title:e(`settings.colorCatalog.syncTooltip`),children:[P?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Ps,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:P?I?`${Math.min(I.fetched,I.total)} / ${I.total}`:e(`settings.colorCatalog.starting`):e(`settings.colorCatalog.sync`)})]}),(0,G.jsxs)(`button`,{onClick:()=>V(!0),className:`px-3 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray hover:text-white transition-colors flex items-center gap-1.5`,children:[(0,G.jsx)(Ul,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.reset`)})]}),(0,G.jsxs)(`button`,{onClick:()=>f(!0),className:`px-3 py-1.5 text-sm bg-bambu-green text-white rounded-lg hover:bg-bambu-green/80 transition-colors flex items-center gap-1.5`,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.add`)})]})]}),A.size>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mt-2 px-3 py-2 bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 rounded-lg`,children:[(0,G.jsx)(`span`,{className:`text-sm text-red-700 dark:text-red-400`,children:e(`settings.colorCatalog.selectedCount`,{count:A.size})}),(0,G.jsxs)(`button`,{onClick:()=>N(!0),className:`ml-auto px-3 py-1.5 text-sm bg-red-500 text-white rounded-lg hover:bg-red-600 transition-colors flex items-center gap-1.5`,children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),e(`settings.colorCatalog.deleteSelected`)]}),(0,G.jsx)(`button`,{onClick:()=>j(new Set),className:`px-3 py-1.5 text-sm text-bambu-gray hover:text-white transition-colors`,children:e(`common.cancel`)})]})]}),(0,G.jsxs)(zd,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`settings.colorCatalog.description`)}),(0,G.jsxs)(`div`,{className:`flex gap-2 flex-wrap`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1 min-w-[200px]`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,className:`w-full pl-10 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`,placeholder:e(`settings.colorCatalog.searchColors`),value:o,onChange:e=>s(e.target.value)})]}),(0,G.jsxs)(`select`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:c,onChange:e=>l(e.target.value),children:[(0,G.jsx)(`option`,{value:``,children:e(`settings.colorCatalog.allManufacturers`)}),te.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]})]}),d&&(0,G.jsxs)(`div`,{className:`p-4 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white mb-3`,children:e(`settings.colorCatalog.addNewColor`)}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 lg:grid-cols-5 gap-2 items-end`,children:[(0,G.jsx)(`input`,{type:`text`,className:`px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`,placeholder:e(`settings.colorCatalog.manufacturer`),value:h,onChange:e=>g(e.target.value)}),(0,G.jsx)(`input`,{type:`text`,className:`px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`,placeholder:e(`settings.colorCatalog.colorName`),value:_,onChange:e=>v(e.target.value)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`color`,className:`w-20 h-10 rounded cursor-pointer border border-bambu-dark-tertiary`,value:b,onChange:e=>x(e.target.value)}),(0,G.jsx)(`input`,{type:`text`,className:`w-32 px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`,placeholder:`#FFFFFF`,value:b,onChange:e=>x(e.target.value)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`input`,{type:`text`,className:`flex-1 max-w-lg min-w-[200px] px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`,placeholder:e(`settings.colorCatalog.materialOptional`),value:S,onChange:e=>C(e.target.value)}),(0,G.jsxs)(`button`,{onClick:ie,disabled:O,className:`w-24 px-3 py-2 bg-bambu-green text-white rounded-lg hover:bg-bambu-green/80 flex items-center justify-center gap-3`,children:[O?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(fs,{className:`w-4 h-4`}),e(`common.add`)]}),(0,G.jsx)(`button`,{onClick:()=>{f(!1),re()},className:`p-2 ml-2 rounded-lg text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 gap-2 mt-2`,children:[(0,G.jsx)(`input`,{type:`text`,className:`px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white text-sm font-mono placeholder-bambu-gray focus:border-bambu-green focus:outline-none`,placeholder:e(`inventory.extraColorsPlaceholder`),value:w,onChange:e=>T(e.target.value)}),(0,G.jsx)(`select`,{className:`px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,value:E,onChange:e=>D(e.target.value),children:bU.map(t=>(0,G.jsx)(`option`,{value:t.value,children:e(t.labelKey)},t.value||`none`))})]})]}),(o||c)&&(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray`,children:e(`settings.colorCatalog.showing`,{filtered:ne.length,total:n.length})}),i?(0,G.jsxs)(`div`,{className:`flex items-center justify-center py-8 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-5 h-5 animate-spin mr-2`}),e(`common.loading`)]}):(0,G.jsx)(`div`,{className:`max-h-[600px] overflow-auto border border-bambu-dark-tertiary rounded-lg`,children:(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{className:`bg-bambu-dark sticky top-0`,children:(0,G.jsxs)(`tr`,{children:[(0,G.jsx)(`th`,{className:`px-2 py-2 w-10`,children:(0,G.jsx)(`input`,{type:`checkbox`,checked:ne.length>0&&A.size===ne.length,onChange:()=>{A.size===ne.length?j(new Set):j(new Set(ne.map(e=>e.id)))},className:`w-4 h-4 accent-bambu-green cursor-pointer`})}),(0,G.jsx)(`th`,{className:`px-3 py-2 text-left text-bambu-gray font-medium w-12`}),(0,G.jsx)(`th`,{className:`px-3 py-2 text-left text-bambu-gray font-medium`,children:e(`settings.colorCatalog.manufacturer`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 text-left text-bambu-gray font-medium`,children:e(`inventory.material`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 text-left text-bambu-gray font-medium`,children:e(`settings.colorCatalog.colorName`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 text-left text-bambu-gray font-medium w-24`,children:e(`settings.colorCatalog.hex`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 w-16`})]})}),(0,G.jsx)(`tbody`,{children:ne.length===0?(0,G.jsx)(`tr`,{children:(0,G.jsx)(`td`,{colSpan:7,className:`px-3 py-8 text-center text-bambu-gray`,children:e(o||c?`settings.colorCatalog.noMatch`:`settings.colorCatalog.empty`)})}):ne.map(t=>(0,G.jsxs)(y.Fragment,{children:[(0,G.jsx)(`tr`,{className:`border-t border-bambu-dark-tertiary hover:bg-bambu-dark ${A.has(t.id)?`bg-bambu-dark`:``}`,children:p===t.id?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`td`,{className:`px-2 py-2`,children:(0,G.jsx)(`input`,{type:`checkbox`,checked:A.has(t.id),onChange:()=>ue(t.id),className:`w-4 h-4 accent-bambu-green cursor-pointer`})}),(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsx)(`input`,{type:`color`,className:`w-8 h-8 rounded cursor-pointer border border-bambu-dark-tertiary`,value:b,onChange:e=>x(e.target.value)})}),(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsx)(`input`,{type:`text`,className:`w-full px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,value:h,onChange:e=>g(e.target.value)})}),(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsx)(`input`,{type:`text`,className:`w-full px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,value:S,onChange:e=>C(e.target.value)})}),(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsx)(`input`,{type:`text`,className:`w-full px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,value:_,onChange:e=>v(e.target.value)})}),(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsx)(`input`,{type:`text`,className:`w-full px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,value:b,onChange:e=>x(e.target.value)})}),(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsxs)(`div`,{className:`flex justify-end gap-1`,children:[(0,G.jsx)(`button`,{onClick:()=>se(t.id),disabled:O,className:`p-1.5 rounded hover:bg-green-500/20 text-green-500`,children:O?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(fs,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:oe,className:`p-1.5 rounded hover:bg-bambu-dark-tertiary text-bambu-gray`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]})})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`td`,{className:`px-2 py-2`,children:(0,G.jsx)(`input`,{type:`checkbox`,checked:A.has(t.id),onChange:()=>ue(t.id),className:`w-4 h-4 accent-bambu-green cursor-pointer`})}),(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsx)($8,{rgba:t.hex_color.replace(/^#/,``)+(t.hex_color.length===7?`FF`:``),extraColors:t.extra_colors,effectType:t.effect_type,className:`w-8 h-8`,shape:`square`,title:t.hex_color,effectSize:`table`})}),(0,G.jsx)(`td`,{className:`px-3 py-2 text-white`,children:t.manufacturer}),(0,G.jsx)(`td`,{className:`px-3 py-2 text-bambu-gray`,children:t.material||`-`}),(0,G.jsx)(`td`,{className:`px-3 py-2 text-white`,children:t.color_name}),(0,G.jsx)(`td`,{className:`px-3 py-2 font-mono text-xs text-bambu-gray`,children:t.hex_color}),(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsxs)(`div`,{className:`flex justify-end gap-1`,children:[(0,G.jsx)(`button`,{onClick:()=>ae(t),className:`p-1.5 rounded hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white`,children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>z(t),className:`p-1.5 rounded bg-red-500/10 hover:bg-red-500/20 text-red-500`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})})]})}),p===t.id&&(0,G.jsxs)(`tr`,{className:`border-t border-bambu-dark-tertiary/50 bg-bambu-dark`,children:[(0,G.jsx)(`td`,{colSpan:2}),(0,G.jsx)(`td`,{className:`px-3 py-2`,colSpan:2,children:(0,G.jsx)(`input`,{type:`text`,className:`w-full px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm font-mono focus:border-bambu-green focus:outline-none`,placeholder:e(`inventory.extraColorsPlaceholder`),value:w,onChange:e=>T(e.target.value)})}),(0,G.jsx)(`td`,{className:`px-3 py-2`,colSpan:2,children:(0,G.jsx)(`select`,{className:`w-full px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,value:E,onChange:e=>D(e.target.value),children:bU.map(t=>(0,G.jsx)(`option`,{value:t.value,children:e(t.labelKey)},t.value||`none`))})}),(0,G.jsx)(`td`,{})]})]},t.id))})]})})]}),R&&(0,G.jsx)(rf,{title:e(`settings.colorCatalog.deleteColor`),message:e(`settings.colorCatalog.deleteConfirm`,{name:`${R.manufacturer} - ${R.color_name}`}),confirmText:e(`common.delete`),variant:`danger`,onConfirm:H,onCancel:()=>z(null)}),M&&(0,G.jsx)(rf,{title:e(`settings.colorCatalog.deleteSelected`),message:e(`settings.colorCatalog.bulkDeleteConfirm`,{count:A.size}),confirmText:e(`common.delete`),variant:`danger`,onConfirm:async()=>{if(N(!1),A.size!==0)try{let n=await Z.bulkDeleteColorEntries([...A]);r(e=>e.filter(e=>!A.has(e.id))),j(new Set),t(e(`settings.colorCatalog.bulkDeleted`,{count:n.deleted}),`success`)}catch{t(e(`settings.colorCatalog.bulkDeleteFailed`),`error`)}},onCancel:()=>N(!1)}),B&&(0,G.jsx)(rf,{title:e(`settings.colorCatalog.resetCatalog`),message:e(`settings.colorCatalog.resetConfirm`),confirmText:e(`common.reset`),variant:`danger`,onConfirm:ce,onCancel:()=>V(!1)})]})}function HWe({link:e,onClose:t}){let{t:n}=U(),r=co(),i=!!e,a=(0,y.useRef)(null),[o,s]=(0,y.useState)(e?.name||``),[c,l]=(0,y.useState)(e?.url||``),[u,d]=(0,y.useState)(e?.icon||`link`),[f,p]=(0,y.useState)(e?.open_in_new_tab||!1),[m,h]=(0,y.useState)(!!e?.custom_icon),[g,_]=(0,y.useState)(e?.custom_icon?Z.getExternalLinkIconUrl(e.id):null),[v,b]=(0,y.useState)(null),[x,S]=(0,y.useState)(null);(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&t()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[t]);let C=q({mutationFn:async e=>{let t=await Z.createExternalLink(e);return v?await Z.uploadExternalLinkIcon(t.id,v):t},onSuccess:()=>{r.invalidateQueries({queryKey:[`external-links`]}),t()},onError:e=>{S(e.message)}}),w=q({mutationFn:async t=>{let n=await Z.updateExternalLink(e.id,t);return v?n=await Z.uploadExternalLinkIcon(e.id,v):!m&&e?.custom_icon&&(n=await Z.deleteExternalLinkIcon(e.id)),n},onSuccess:()=>{r.invalidateQueries({queryKey:[`external-links`]}),t()},onError:e=>{S(e.message)}}),T=e=>{let t=e.target.files?.[0];if(t){if(![`image/png`,`image/jpeg`,`image/gif`,`image/svg+xml`,`image/webp`,`image/x-icon`].includes(t.type)){S(`Please select a valid image file (PNG, JPG, GIF, SVG, WebP, or ICO)`);return}if(t.size>1024*1024){S(`Image file must be less than 1MB`);return}b(t),h(!0);let e=new FileReader;e.onload=e=>{_(e.target?.result)},e.readAsDataURL(t)}},E=()=>{b(null),_(null),h(!1),a.current&&(a.current.value=``)},D=e=>{if(e.preventDefault(),S(null),!o.trim()){S(`Name is required`);return}if(!c.trim()){S(`URL is required`);return}if(!c.startsWith(`http://`)&&!c.startsWith(`https://`)){S(`URL must start with http:// or https://`);return}let t={name:o.trim(),url:c.trim(),icon:u,open_in_new_tab:f};i?w.mutate(t):C.mutate(t)},O=C.isPending||w.isPending,k=cf(u);return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:t,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-md`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-full bg-bambu-green/20 text-bambu-green`,children:m&&g?(0,G.jsx)(`img`,{src:g,alt:``,className:`w-5 h-5 rounded`}):(0,G.jsx)(k,{className:`w-5 h-5`})}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i?`Edit Link`:`Add External Link`})]}),(0,G.jsx)(`button`,{onClick:t,className:`text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`form`,{onSubmit:D,className:`p-6 space-y-4`,children:[x&&(0,G.jsx)(`div`,{className:`p-3 bg-red-100 dark:bg-red-500/20 border border-red-300 dark:border-red-500/50 rounded-lg text-sm text-red-700 dark:text-red-400`,children:x}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:`Name *`}),(0,G.jsx)(`input`,{type:`text`,value:o,onChange:e=>s(e.target.value),placeholder:`My Link`,maxLength:50,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:`URL *`}),(0,G.jsx)(`input`,{type:`text`,value:c,onChange:e=>l(e.target.value),placeholder:`https://example.com`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`label`,{className:`text-sm text-bambu-gray`,children:n(`externalLinks.openInNewTab`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>p(!f),className:`relative inline-flex h-6 w-11 items-center rounded-full transition-colors ${f?`bg-bambu-green`:`bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(`span`,{className:`inline-block h-4 w-4 transform rounded-full bg-white transition-transform ${f?`translate-x-6`:`translate-x-1`}`})})]}),(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray`,children:`Icon`}),(0,G.jsxs)(`div`,{className:`p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:`Custom Icon`}),(0,G.jsx)(`input`,{ref:a,type:`file`,accept:`image/png,image/jpeg,image/gif,image/svg+xml,image/webp,image/x-icon`,className:`hidden`,onChange:T}),m&&g?(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`img`,{src:g,alt:`Custom icon`,className:`w-8 h-8 rounded border border-bambu-dark-tertiary`}),(0,G.jsx)(`button`,{type:`button`,onClick:E,className:`p-1 text-red-700 dark:text-red-400 hover:text-red-800 dark:hover:text-red-300 transition-colors`,title:`Remove custom icon`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]}):(0,G.jsxs)(Q,{type:`button`,variant:`secondary`,size:`sm`,onClick:()=>a.current?.click(),children:[(0,G.jsx)(Bu,{className:`w-4 h-4`}),`Upload`]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:`PNG, JPG, GIF, SVG, WebP, or ICO. Max 1MB.`})]}),!m&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray block mb-2`,children:`Or choose a preset icon`}),(0,G.jsx)(lf,{value:u,onChange:d})]})]}),(0,G.jsxs)(`div`,{className:`flex gap-3 pt-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:t,className:`flex-1`,children:`Cancel`}),(0,G.jsxs)(Q,{type:`submit`,disabled:O,className:`flex-1`,children:[O?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Kl,{className:`w-4 h-4`}),i?`Save`:`Add`]})]})]})]})})}function UWe(){let{t:e}=U(),t=co(),{authEnabled:n,hasPermission:r}=jd(),{showToast:i}=Gd(),[a,o]=(0,y.useState)(!1),[s,c]=(0,y.useState)(null),[l,u]=(0,y.useState)(null),[d,f]=(0,y.useState)(null),[p,m]=(0,y.useState)(null),[h,g]=(0,y.useState)(om),[_,v]=(0,y.useState)(()=>im(cm.map(e=>e.id))),{data:b,isLoading:x}=K({queryKey:[`external-links`],queryFn:Z.getExternalLinks}),S=q({mutationFn:e=>Z.deleteExternalLink(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`external-links`]})}}),{data:C}=K({queryKey:[`settings`],queryFn:Z.getSettings,enabled:n&&r(`settings:update`)}),w=q({mutationFn:e=>Z.updateSettings({default_sidebar_order:e}),onSuccess:(n,r)=>{t.invalidateQueries({queryKey:[`settings`]}),t.invalidateQueries({queryKey:[`default-sidebar-order`]}),i(e(r?`settings.sidebarDefaultSet`:`settings.sidebarDefaultCleared`),`success`)},onError:()=>{i(e(`settings.sidebarDefaultFailed`),`error`)}}),T=(0,y.useMemo)(()=>{let e=new Map(cm.map(e=>[e.id,e])),t=new Map((b||[]).map(e=>[`ext-${e.id}`,e])),n=[],r=new Set,i=i=>{if(r.has(i))return;let a=e.get(i);if(a){n.push({type:`system`,id:i,navItem:a}),r.add(i);return}let o=t.get(i);o&&(n.push({type:`external`,id:i,link:o}),r.add(i))};return _.forEach(i),cm.forEach(e=>i(e.id)),(b||[]).forEach(e=>i(`ext-${e.id}`)),n},[b,_]),E=e=>{v(e),am(e)},D=(e,t)=>{f(t),e.dataTransfer.effectAllowed=`move`,e.dataTransfer.setData(`text/plain`,t)},O=(e,t)=>{e.preventDefault(),e.dataTransfer.dropEffect=`move`,m(t)},k=(e,t)=>{if(e.preventDefault(),d===null||d===t){f(null),m(null);return}let n=T.map(e=>e.id),r=n.indexOf(d),i=n.indexOf(t);if(r===-1||i===-1){f(null),m(null);return}n.splice(r,1),n.splice(i,0,d),E(n),f(null),m(null)},A=()=>{f(null),m(null)},j=e=>{u(e)},M=()=>{l&&(S.mutate(l.id),u(null))},N=()=>{let e=[...cm.map(e=>e.id),...(b||[]).map(e=>`ext-${e.id}`)];g([]),v(e),sm([]),am(e)},P=e=>{let t=T.map(e=>e.id);w.mutate(e?JSON.stringify({order:t,hiddenSystemItemIds:h}):``)},F=e=>{if(e===`settings`)return;let t=h.includes(e)?h.filter(t=>t!==e):[...h,e];g(t),sm(t)},I=n&&r(`settings:update`),L=!!C?.default_sidebar_order;return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(Ld,{id:`card-sidebar-links`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center justify-between gap-y-2 gap-x-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Yc,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`externalLinks.sidebarLayout`)})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2`,children:[I&&(0,G.jsxs)(`label`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(`span`,{children:e(`settings.setDefault`)}),(0,G.jsx)(hU,{checked:L,onChange:P,disabled:w.isPending})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:N,className:`whitespace-nowrap`,children:[(0,G.jsx)(Ul,{className:`w-4 h-4`}),e(`settings.reset`)]}),(0,G.jsxs)(Q,{size:`sm`,onClick:()=>o(!0),className:`whitespace-nowrap`,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),`Add Link`]})]})]})}),(0,G.jsxs)(zd,{children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4`,children:e(`externalLinks.sidebarLayoutDescription`)}),x?(0,G.jsx)(`div`,{className:`flex justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})}):(0,G.jsx)(`div`,{className:`space-y-2`,children:T.map(t=>{let n=t.type===`system`&&h.includes(t.id),r=t.id===`settings`;if(t.type===`system`){let i=t.navItem.icon;return(0,G.jsxs)(`div`,{draggable:!0,onDragStart:e=>D(e,t.id),onDragOver:e=>O(e,t.id),onDragLeave:()=>m(null),onDrop:e=>k(e,t.id),onDragEnd:A,className:`relative flex items-center gap-3 p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary transition-colors ${d===t.id?`opacity-50`:n?`opacity-60`:``} ${p===t.id&&d!==t.id?`before:absolute before:left-3 before:right-3 before:top-0 before:h-0.5 before:bg-bambu-green`:``}`,children:[(0,G.jsx)(Ac,{className:`w-6 h-6 md:w-4 md:h-4 text-bambu-gray cursor-grab flex-shrink-0`}),(0,G.jsx)(`div`,{className:`p-2 rounded-lg bg-bambu-dark-tertiary text-bambu-gray`,children:(0,G.jsx)(i,{className:`w-4 h-4`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`span`,{className:`text-white font-medium truncate block`,children:e(t.navItem.labelKey)}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray truncate block`,children:e(r?`externalLinks.requiredInSidebar`:n?`externalLinks.hiddenFromSidebar`:`externalLinks.visibleInSidebar`)})]}),(0,G.jsx)(`button`,{onClick:()=>F(t.id),disabled:r,className:`p-2 rounded-lg hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white transition-colors flex-shrink-0 disabled:opacity-40 disabled:cursor-not-allowed disabled:hover:bg-transparent disabled:hover:text-bambu-gray`,title:e(r?`externalLinks.settingsCannotBeHidden`:n?`externalLinks.showPage`:`externalLinks.hidePage`),"aria-label":e(r?`externalLinks.settingsCannotBeHidden`:n?`externalLinks.showPage`:`externalLinks.hidePage`),children:n?(0,G.jsx)(rc,{className:`w-4 h-4`}):(0,G.jsx)(ic,{className:`w-4 h-4`})})]},t.id)}let i=t.link,a=cf(i.icon);return(0,G.jsxs)(`div`,{draggable:!0,onDragStart:e=>D(e,t.id),onDragOver:e=>O(e,t.id),onDragLeave:()=>m(null),onDrop:e=>k(e,t.id),onDragEnd:A,className:`relative flex items-center gap-3 p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary transition-colors ${d===t.id?`opacity-50`:``} ${p===t.id&&d!==t.id?`before:absolute before:left-3 before:right-3 before:top-0 before:h-0.5 before:bg-bambu-green`:``}`,children:[(0,G.jsx)(Ac,{className:`w-6 h-6 md:w-4 md:h-4 text-bambu-gray cursor-grab flex-shrink-0`}),(0,G.jsx)(`div`,{className:`p-2 rounded-lg bg-bambu-dark-tertiary text-bambu-gray`,children:i.custom_icon?(0,G.jsx)(`img`,{src:Z.getExternalLinkIconUrl(i.id),alt:``,className:`w-4 h-4`}):(0,G.jsx)(a,{className:`w-4 h-4`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-white font-medium truncate`,children:i.name}),(0,G.jsx)(nc,{className:`w-3 h-3 text-bambu-gray flex-shrink-0`})]}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray truncate block`,children:i.url})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 flex-shrink-0`,children:[(0,G.jsx)(`button`,{onClick:()=>c(i),className:`p-2 rounded-lg hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white transition-colors`,title:e(`common.edit`),children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>j(i),disabled:S.isPending,className:`p-2 rounded-lg hover:bg-red-100 dark:hover:bg-red-500/20 text-bambu-gray hover:text-red-900 dark:hover:text-red-400 transition-colors disabled:opacity-50`,title:e(`externalLinks.deleteLink`),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})]},t.id)})})]})]}),(a||s)&&(0,G.jsx)(HWe,{link:s,onClose:()=>{o(!1),c(null)}}),l&&(0,G.jsx)(rf,{title:`Delete Link`,message:`Are you sure you want to delete "${l.name}"? This action cannot be undone.`,confirmText:`Delete`,cancelText:`Cancel`,variant:`danger`,onConfirm:M,onCancel:()=>u(null)})]})}async function WWe(e){if(navigator.clipboard&&window.isSecureContext)try{return await navigator.clipboard.writeText(e),!0}catch{}let t=document.createElement(`textarea`);t.value=e,t.style.position=`fixed`,t.style.opacity=`0`,document.body.appendChild(t);try{return t.select(),document.execCommand(`copy`)}catch{return!1}finally{t.parentNode&&t.parentNode.removeChild(t)}}function GWe(e,t,n=`text/plain`){let r=new Blob([e],{type:n}),i=URL.createObjectURL(r),a=document.createElement(`a`);a.href=i,a.download=t,document.body.appendChild(a),a.click(),a.remove(),URL.revokeObjectURL(i)}function KWe({status:e}){return e===`pass`?(0,G.jsx)(Ss,{className:`w-5 h-5 text-bambu-green flex-shrink-0`}):e===`fail`?(0,G.jsx)(Ds,{className:`w-5 h-5 text-red-600 dark:text-red-400 flex-shrink-0`}):e===`warn`?(0,G.jsx)(Iu,{className:`w-5 h-5 text-amber-600 dark:text-amber-400 flex-shrink-0`}):(0,G.jsx)(ws,{className:`w-5 h-5 text-bambu-gray flex-shrink-0`})}function qWe({vpId:e,vpName:t,onClose:n}){let{t:r}=U(),i=q({mutationFn:()=>Cd.diagnose(e)});(0,y.useEffect)(()=>{i.mutate()},[]),(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&n()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[n]);let a=i.data,o=a?.overall===`ok`?`bg-bambu-green/10 border-bambu-green/30 text-bambu-green`:a?.overall===`warnings`?`bg-amber-50 dark:bg-amber-500/10 border-amber-300 dark:border-amber-500/30 text-amber-700 dark:text-amber-300`:`bg-red-50 dark:bg-red-500/10 border-red-300 dark:border-red-500/30 text-red-700 dark:text-red-300`;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:n,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-lg flex flex-col max-h-[85vh]`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 min-w-0`,children:[(0,G.jsx)(xu,{className:`w-5 h-5 text-bambu-green flex-shrink-0`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white truncate`,children:r(`vpDiagnostic.title`,{name:t})})]}),(0,G.jsx)(`button`,{onClick:n,className:`text-bambu-gray hover:text-white transition-colors`,title:r(`common.close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-6 space-y-4 overflow-y-auto`,children:[i.isPending&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),(0,G.jsx)(`span`,{children:r(`vpDiagnostic.running`)})]}),i.isError&&(0,G.jsx)(`div`,{className:`rounded-lg bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 px-4 py-3 text-sm text-red-700 dark:text-red-300`,children:r(`vpDiagnostic.runFailed`,{error:i.error.message})}),a&&(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`ol`,{className:`space-y-2`,children:a.checks.map(e=>{let t=r(`vpDiagnostic.check.${e.id}.${e.status}`,{...e.params,defaultValue:``});return(0,G.jsxs)(`li`,{className:`flex items-start gap-3 bg-bambu-dark rounded-lg px-4 py-2.5 ${e.status===`skip`?`opacity-60`:``}`,children:[(0,G.jsx)(`div`,{className:`mt-0.5`,children:(0,G.jsx)(KWe,{status:e.status})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-sm text-white`,children:r(`vpDiagnostic.check.${e.id}.title`,e.params)}),t&&(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mt-0.5`,children:t})]})]},e.id)})}),(0,G.jsx)(`div`,{className:`rounded-lg border px-4 py-3 text-sm ${o}`,children:r(`vpDiagnostic.overall.${a.overall}`)})]})]}),(0,G.jsxs)(`div`,{className:`px-6 py-4 border-t border-bambu-dark-tertiary flex justify-end gap-2`,children:[(0,G.jsx)(`button`,{onClick:()=>i.mutate(),disabled:i.isPending,className:`px-4 py-2 bg-bambu-dark hover:bg-bambu-dark-tertiary disabled:opacity-50 text-white text-sm rounded-lg transition-colors`,children:r(`vpDiagnostic.retry`)}),(0,G.jsx)(`button`,{onClick:n,className:`px-4 py-2 bg-bambu-green hover:bg-bambu-green/90 text-white text-sm rounded-lg transition-colors`,children:r(`common.close`)})]})]})})}var e5={archive:`archive`,review:`review`,queue:`queue`,proxy:`proxy`};function t5(e){return e===`immediate`?`archive`:e===`print_queue`||e===`queue`?`queue`:e===`archive`||e===`review`||e===`proxy`?e:`archive`}function JWe({printer:e,models:t}){let{t:n}=U(),r=co(),{showToast:i}=Gd(),[a,o]=(0,y.useState)(!0),[s,c]=(0,y.useState)(e.enabled),[l,u]=(0,y.useState)(e.name),[d,f]=(0,y.useState)(``),[p,m]=(0,y.useState)(t5(e.mode)),[h,g]=(0,y.useState)(e.target_printer_id),[_,v]=(0,y.useState)(e.bind_ip||``),[b,x]=(0,y.useState)(e.remote_interface_ip||``),[S,C]=(0,y.useState)(e.model||``),[w,T]=(0,y.useState)(e.auto_dispatch??!0),[E,D]=(0,y.useState)(e.queue_force_color_match??!1),[O,k]=(0,y.useState)(e.save_ams_mapping??!1),[A,j]=(0,y.useState)(e.gcode_injection??!1),[M,N]=(0,y.useState)(e.tailscale_disabled??!0),[P,F]=(0,y.useState)(!1),[I,L]=(0,y.useState)(null),[R,z]=(0,y.useState)(!1),[B,V]=(0,y.useState)(!1),[ee,te]=(0,y.useState)(!1),{data:ne}=K({queryKey:[`tailscale-status`],queryFn:Cd.getTailscaleStatus,enabled:!M,staleTime:6e4}),re=ne?.available?ne.fqdn:``,ie=ne?.available?ne.tailscale_ips?.[0]??``:``,ae=async e=>{e.stopPropagation();let t=re;t&&(await WWe(t)?(te(!0),i(n(`printers.copied`)),setTimeout(()=>te(!1),2e3)):i(n(`virtualPrinter.toast.copyFailed`),`error`))};(0,y.useEffect)(()=>{I||(c(e.enabled),m(t5(e.mode)),u(e.name),g(e.target_printer_id),v(e.bind_ip||``),x(e.remote_interface_ip||``),C(e.model||``),T(e.auto_dispatch??!0),D(e.queue_force_color_match??!1),k(e.save_ams_mapping??!1),j(e.gcode_injection??!1),N(e.tailscale_disabled??!0))},[e,I]);let{data:oe}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:se}=K({queryKey:[`network-interfaces`],queryFn:()=>Z.getNetworkInterfaces().then(e=>e.interfaces)}),H=q({mutationFn:t=>Cd.update(e.id,t),onSuccess:()=>{r.invalidateQueries({queryKey:[`virtual-printers`]}),i(n(`virtualPrinter.toast.updated`)),L(null)},onError:t=>{i(t.message||n(`virtualPrinter.toast.failedToUpdate`),`error`),c(e.enabled),m(t5(e.mode)),g(e.target_printer_id),v(e.bind_ip||``),N(e.tailscale_disabled??!0),D(e.queue_force_color_match??!1),k(e.save_ams_mapping??!1),j(e.gcode_injection??!1),L(null)}}),ce=q({mutationFn:()=>Cd.remove(e.id),onSuccess:()=>{r.invalidateQueries({queryKey:[`virtual-printers`]}),i(n(`virtualPrinter.toast.deleted`)),z(!1)},onError:e=>{i(e.message||n(`virtualPrinter.toast.failedToDelete`),`error`),z(!1)}}),le=t=>{t.stopPropagation();let r=!s;if(r){if(!_){i(n(`virtualPrinter.toast.bindIpRequired`),`error`);return}if(p===`proxy`){if(!h){i(n(`virtualPrinter.toast.targetPrinterRequired`),`error`);return}}else if(!d&&!e.access_code_set){i(n(`virtualPrinter.toast.accessCodeRequired`),`error`);return}}c(r),L(`toggle`),H.mutate({enabled:r})},ue=()=>{l.trim()&&(L(`name`),H.mutate({name:l.trim()}))},de=()=>{if(!d){i(n(`virtualPrinter.toast.accessCodeEmpty`),`error`);return}if(d.length!==8){i(n(`virtualPrinter.toast.accessCodeLength`),`error`);return}L(`accessCode`),H.mutate({access_code:d}),f(``)},fe=e=>{m(e),L(`mode`),H.mutate({mode:e})},pe=e=>{C(e),L(`model`),H.mutate({model:e})},me=e=>{let t=ve?.access_code,r=oe?.find(t=>t.id===e)?.access_code;g(e),L(`targetPrinter`),H.mutate({target_printer_id:e},{onSuccess:()=>{t&&r&&t!==r&&i(n(`virtualPrinter.toast.targetCodeChangedRebind`),`info`)}})},he=e=>{x(e),L(`remoteInterface`),H.mutate({remote_interface_ip:e})},ge=e.status?.running||!1,_e=n(`virtualPrinter.mode.${e5[p]||`archive`}`),ve=oe?.find(e=>e.id===h),ye=ve?.name,be=!!h,xe=be?ve?.access_code??``:``;return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(Ld,{className:`overflow-hidden`,children:[(0,G.jsxs)(`div`,{className:`px-4 py-3 flex items-center gap-3 cursor-pointer select-none`,onClick:()=>o(!a),children:[(0,G.jsx)(`button`,{className:`text-bambu-gray flex-shrink-0`,children:a?(0,G.jsx)(ps,{className:`w-4 h-4`}):(0,G.jsx)(ms,{className:`w-4 h-4`})}),(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full flex-shrink-0 ${ge?`bg-green-400 animate-pulse`:`bg-gray-500`}`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0 flex flex-wrap items-center gap-x-3 gap-y-1`,children:[(0,G.jsx)(`span`,{className:`text-white font-medium truncate max-w-full`,children:e.name}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray flex-shrink-0`,children:_e}),e.model_name&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray flex-shrink-0`,children:e.model_name}),ye&&(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray truncate max-w-full`,children:[p===`proxy`&&(0,G.jsx)(Ro,{className:`w-3 h-3 inline mr-1`}),ye]}),_&&(0,G.jsx)(`span`,{className:`text-[10px] text-bambu-gray flex-shrink-0 font-mono`,children:_}),b&&(0,G.jsx)(`span`,{className:`text-[10px] text-bambu-gray flex-shrink-0 font-mono`,children:b})]}),(0,G.jsx)(`div`,{className:`ml-auto flex items-center gap-2 flex-shrink-0`,onClick:e=>e.stopPropagation(),children:(0,G.jsx)(`button`,{onClick:le,disabled:I===`toggle`,className:`relative w-10 h-5 rounded-full transition-colors ${s?`bg-bambu-green`:`bg-bambu-dark-tertiary`} ${I===`toggle`?`opacity-50`:``}`,children:(0,G.jsx)(`span`,{className:`absolute top-0.5 left-0.5 w-4 h-4 bg-white rounded-full transition-transform ${s?`translate-x-5`:``}`})})})]}),a&&(0,G.jsxs)(zd,{className:`pt-0 space-y-4`,children:[(0,G.jsx)(`div`,{className:`border-t border-bambu-dark-tertiary`}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`text`,value:l,onChange:e=>u(e.target.value),onBlur:ue,onKeyDown:e=>e.key===`Enter`&&ue(),className:`flex-1 text-sm text-white bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-1.5 focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`button`,{onClick:()=>V(!0),className:`p-1.5 text-bambu-gray hover:text-bambu-green transition-colors flex-shrink-0`,title:n(`vpDiagnostic.runButton`),children:(0,G.jsx)(xu,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>z(!0),className:`p-1.5 text-bambu-gray hover:text-red-600 dark:hover:text-red-400 transition-colors flex-shrink-0`,title:n(`common.delete`),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 -mt-2`,children:[re&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-green-700/80 dark:text-green-400/70 min-w-0`,children:[(0,G.jsx)(iu,{className:`w-3.5 h-3.5 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`font-mono text-xs truncate`,children:ie?`${ie} (${re})`:re}),(0,G.jsx)(`button`,{onClick:ae,className:`p-0.5 rounded hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white transition-colors flex-shrink-0`,title:n(ee?`printers.copied`:`printers.copyToClipboard`),children:ee?(0,G.jsx)(fs,{className:`w-3.5 h-3.5 text-bambu-green`}):(0,G.jsx)(Vs,{className:`w-3.5 h-3.5`})})]}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray font-mono ml-auto flex-shrink-0`,children:e.serial})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium mb-2`,children:n(`virtualPrinter.mode.title`)}),(0,G.jsx)(`div`,{className:`grid grid-cols-2 gap-2`,children:[`archive`,`review`,`queue`,`proxy`].map(e=>(0,G.jsxs)(`button`,{onClick:()=>fe(e),disabled:I===`mode`,className:`p-2 rounded-lg border text-left transition-colors ${p===e?e===`proxy`?`border-blue-500 bg-blue-500/10`:`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-white text-xs font-medium`,children:[e===`proxy`&&(0,G.jsx)(Ro,{className:`w-3 h-3`}),n(`virtualPrinter.mode.${e5[e]}`)]}),(0,G.jsx)(`div`,{className:`text-[10px] text-bambu-gray`,children:n(`virtualPrinter.mode.${e5[e]}Desc`)})]},e))})]}),p===`queue`&&(0,G.jsx)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium`,children:n(`virtualPrinter.autoDispatch.title`)}),(0,G.jsx)(`div`,{className:`text-[10px] text-bambu-gray`,children:n(`virtualPrinter.autoDispatch.description`)})]}),(0,G.jsx)(`button`,{onClick:()=>{let e=!w;T(e),L(`autoDispatch`),H.mutate({auto_dispatch:e})},disabled:I===`autoDispatch`,className:`relative w-10 h-5 rounded-full transition-colors flex-shrink-0 ${w?`bg-bambu-green`:`bg-bambu-dark-tertiary`} ${I===`autoDispatch`?`opacity-50`:``}`,children:(0,G.jsx)(`span`,{className:`absolute top-0.5 left-0.5 w-4 h-4 bg-white rounded-full transition-transform ${w?`translate-x-5`:``}`})})]})}),p===`queue`&&(0,G.jsx)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium`,children:n(`virtualPrinter.queueForceColorMatch.title`)}),(0,G.jsx)(`div`,{className:`text-[10px] text-bambu-gray`,children:n(`virtualPrinter.queueForceColorMatch.description`)})]}),(0,G.jsx)(`button`,{onClick:()=>{let e=!E;D(e),L(`queueForceColorMatch`),H.mutate({queue_force_color_match:e})},disabled:I===`queueForceColorMatch`,className:`relative w-10 h-5 rounded-full transition-colors flex-shrink-0 ${E?`bg-bambu-green`:`bg-bambu-dark-tertiary`} ${I===`queueForceColorMatch`?`opacity-50`:``}`,children:(0,G.jsx)(`span`,{className:`absolute top-0.5 left-0.5 w-4 h-4 bg-white rounded-full transition-transform ${E?`translate-x-5`:``}`})})]})}),p===`queue`&&(0,G.jsx)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium`,children:n(`virtualPrinter.saveAmsMapping.title`)}),(0,G.jsx)(`div`,{className:`text-[10px] text-bambu-gray`,children:n(`virtualPrinter.saveAmsMapping.description`)})]}),(0,G.jsx)(`button`,{onClick:()=>{let e=!O;k(e),L(`saveAmsMapping`),H.mutate({save_ams_mapping:e})},disabled:I===`saveAmsMapping`,className:`relative w-10 h-5 rounded-full transition-colors flex-shrink-0 ${O?`bg-bambu-green`:`bg-bambu-dark-tertiary`} ${I===`saveAmsMapping`?`opacity-50`:``}`,children:(0,G.jsx)(`span`,{className:`absolute top-0.5 left-0.5 w-4 h-4 bg-white rounded-full transition-transform ${O?`translate-x-5`:``}`})})]})}),p===`queue`&&(0,G.jsx)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium`,children:n(`virtualPrinter.gcodeInjection.title`)}),(0,G.jsx)(`div`,{className:`text-[10px] text-bambu-gray`,children:n(`virtualPrinter.gcodeInjection.description`)})]}),(0,G.jsx)(`button`,{onClick:()=>{let e=!A;j(e),L(`gcodeInjection`),H.mutate({gcode_injection:e})},disabled:I===`gcodeInjection`,className:`relative w-10 h-5 rounded-full transition-colors flex-shrink-0 ${A?`bg-bambu-green`:`bg-bambu-dark-tertiary`} ${I===`gcodeInjection`?`opacity-50`:``}`,children:(0,G.jsx)(`span`,{className:`absolute top-0.5 left-0.5 w-4 h-4 bg-white rounded-full transition-transform ${A?`translate-x-5`:``}`})})]})}),(0,G.jsx)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium`,children:n(`virtualPrinter.tailscaleDisabled.title`)}),(0,G.jsx)(`div`,{className:`text-[10px] text-bambu-gray`,children:n(`virtualPrinter.tailscaleDisabled.description`)})]}),(0,G.jsx)(`button`,{onClick:()=>{let e=!M;N(e),L(`tailscaleDisabled`),H.mutate({tailscale_disabled:e})},disabled:I===`tailscaleDisabled`,className:`relative w-10 h-5 rounded-full transition-colors shrink-0 ${M?`bg-bambu-dark-tertiary`:`bg-bambu-green`} ${I===`tailscaleDisabled`?`opacity-50`:``}`,children:(0,G.jsx)(`span`,{className:`absolute top-0.5 left-0.5 w-4 h-4 bg-white rounded-full transition-transform ${M?``:`translate-x-5`}`})})]})}),p!==`proxy`&&(0,G.jsxs)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium mb-1`,children:n(`virtualPrinter.model.title`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:n(`virtualPrinter.model.description`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`select`,{value:S,onChange:e=>pe(e.target.value),disabled:I===`model`,className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-1.5 text-white text-sm appearance-none cursor-pointer disabled:opacity-50 pr-10`,children:Object.entries(t).map(([e,t])=>(0,G.jsxs)(`option`,{value:e,children:[t,` (`,e,`)`]},e))}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]})]}),p===`proxy`&&(0,G.jsx)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2 p-2 rounded bg-blue-50 border border-blue-300 dark:bg-blue-500/10 dark:border-blue-500/30`,children:[(0,G.jsx)(Uc,{className:`w-4 h-4 text-blue-600 dark:text-blue-400 flex-shrink-0 mt-0.5`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`virtualPrinter.proxy.accessCodeHint`)})]})}),p!==`proxy`&&(0,G.jsxs)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-2`,children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium`,children:n(`virtualPrinter.accessCode.title`)}),be?(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-xs text-blue-700 dark:text-blue-400`,children:[(0,G.jsx)(Uc,{className:`w-3 h-3`}),n(`virtualPrinter.accessCode.inheritedFromTarget`)]}):e.access_code_set?(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-xs text-green-700 dark:text-green-400`,children:[(0,G.jsx)(fs,{className:`w-3 h-3`}),n(`virtualPrinter.accessCode.isSet`)]}):(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-xs text-yellow-700 dark:text-yellow-400`,children:[(0,G.jsx)(Iu,{className:`w-3 h-3`}),n(`virtualPrinter.accessCode.notSet`)]})]}),be?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`input`,{type:P?`text`:`password`,value:xe,readOnly:!0,"aria-label":n(`virtualPrinter.accessCode.title`),className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-1.5 text-white text-sm pr-10 font-mono opacity-90 cursor-default`}),(0,G.jsx)(`button`,{onClick:()=>F(!P),className:`absolute right-2 top-1/2 -translate-y-1/2 text-bambu-gray hover:text-white`,"aria-label":n(P?`virtualPrinter.accessCode.hide`:`virtualPrinter.accessCode.reveal`),children:P?(0,G.jsx)(rc,{className:`w-4 h-4`}):(0,G.jsx)(ic,{className:`w-4 h-4`})})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(`virtualPrinter.accessCode.derivedFromTargetHint`)})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsx)(`input`,{type:P?`text`:`password`,value:d,onChange:e=>f(e.target.value),placeholder:e.access_code_set?n(`virtualPrinter.accessCode.placeholderChange`):n(`virtualPrinter.accessCode.placeholder`),maxLength:8,className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-1.5 text-white text-sm placeholder-bambu-gray pr-10 font-mono`}),(0,G.jsx)(`button`,{onClick:()=>F(!P),className:`absolute right-2 top-1/2 -translate-y-1/2 text-bambu-gray hover:text-white`,children:P?(0,G.jsx)(rc,{className:`w-4 h-4`}):(0,G.jsx)(ic,{className:`w-4 h-4`})})]}),(0,G.jsx)(Q,{onClick:de,disabled:!d||I===`accessCode`,variant:`primary`,children:I===`accessCode`?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):n(`common.save`)})]}),d&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:(0,G.jsx)(`span`,{className:d.length===8?`text-green-700 dark:text-green-400`:`text-yellow-700 dark:text-yellow-400`,children:n(`virtualPrinter.accessCode.charCount`,{count:d.length})})})]})]}),(0,G.jsxs)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium mb-2`,children:n(`virtualPrinter.targetPrinter.title`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:h??``,onChange:e=>{let t=parseInt(e.target.value,10);isNaN(t)||me(t)},disabled:I===`targetPrinter`,className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-1.5 text-white text-sm appearance-none cursor-pointer disabled:opacity-50 pr-10`,children:[(0,G.jsx)(`option`,{value:``,children:n(`virtualPrinter.targetPrinter.placeholder`)}),oe?.map(e=>(0,G.jsxs)(`option`,{value:e.id,children:[e.name,` (`,e.ip_address,`)`]},e.id))]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]})]}),(0,G.jsxs)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium mb-1`,children:n(`virtualPrinter.bindIp.title`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:_,onChange:e=>{v(e.target.value),L(`bindIp`),H.mutate({bind_ip:e.target.value})},disabled:I===`bindIp`,className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-1.5 text-white text-sm appearance-none cursor-pointer disabled:opacity-50 pr-10`,children:[(0,G.jsx)(`option`,{value:``,children:n(`virtualPrinter.bindIp.placeholder`)}),se?.map(e=>(0,G.jsxs)(`option`,{value:e.ip,children:[e.name,` (`,e.ip,`)`,e.is_alias?` [alias]`:``,` - `,e.subnet]},e.ip))]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(`virtualPrinter.bindIp.hint`)})]}),(0,G.jsxs)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1`,children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium`,children:n(`virtualPrinter.remoteInterface.title`)}),b?(0,G.jsx)(`span`,{className:`flex items-center gap-1 text-xs text-green-700 dark:text-green-400`,children:(0,G.jsx)(fs,{className:`w-3 h-3`})}):(0,G.jsx)(`span`,{className:`flex items-center gap-1 text-xs text-bambu-gray`,title:n(`virtualPrinter.remoteInterface.optional`),children:(0,G.jsx)(Uc,{className:`w-3 h-3`})})]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:b,onChange:e=>he(e.target.value),disabled:I===`remoteInterface`,className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-1.5 text-white text-sm appearance-none cursor-pointer disabled:opacity-50 pr-10`,children:[(0,G.jsx)(`option`,{value:``,children:n(`virtualPrinter.remoteInterface.placeholder`)}),se?.map(e=>(0,G.jsxs)(`option`,{value:e.ip,children:[e.name,` (`,e.ip,`) - `,e.subnet]},e.ip))]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]})]})]})]}),R&&(0,G.jsx)(rf,{title:n(`virtualPrinter.deleteConfirm.title`),message:n(`virtualPrinter.deleteConfirm.message`,{name:e.name}),variant:`danger`,confirmText:n(`common.delete`),isLoading:ce.isPending,onConfirm:()=>ce.mutate(),onCancel:()=>z(!1)}),B&&(0,G.jsx)(qWe,{vpId:e.id,vpName:e.name,onClose:()=>V(!1)})]})}var YWe={archive:`archive`,review:`review`,queue:`queue`,proxy:`proxy`};function XWe({onClose:e}){let{t}=U(),n=co(),{showToast:r}=Gd(),[i,a]=(0,y.useState)(``),[o,s]=(0,y.useState)(`archive`),[c,l]=(0,y.useState)(null),{data:u}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),d=q({mutationFn:()=>Cd.create({name:i.trim()||`Bambuddy`,mode:o,target_printer_id:o===`proxy`?c??void 0:void 0}),onSuccess:()=>{n.invalidateQueries({queryKey:[`virtual-printers`]}),r(t(`virtualPrinter.toast.created`)),e()},onError:e=>{r(e.message||t(`virtualPrinter.toast.failedToCreate`),`error`)}});return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,onClick:e,children:(0,G.jsx)(Ld,{className:`w-full max-w-md`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(zd,{className:`p-6 space-y-4`,children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white`,children:t(`virtualPrinter.addDialog.title`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-sm text-white font-medium block mb-1`,children:t(`virtualPrinter.addDialog.name`)}),(0,G.jsx)(`input`,{type:`text`,value:i,onChange:e=>a(e.target.value),placeholder:`Bambuddy`,className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-2 text-white text-sm placeholder-bambu-gray`,autoFocus:!0})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-sm text-white font-medium block mb-1`,children:t(`virtualPrinter.mode.title`)}),(0,G.jsx)(`div`,{className:`grid grid-cols-2 gap-2`,children:[`archive`,`review`,`queue`,`proxy`].map(e=>(0,G.jsxs)(`button`,{onClick:()=>s(e),className:`p-2 rounded-lg border text-left transition-colors ${o===e?e===`proxy`?`border-blue-500 bg-blue-500/10`:`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-white text-xs font-medium`,children:[e===`proxy`&&(0,G.jsx)(Ro,{className:`w-3 h-3`}),t(`virtualPrinter.mode.${YWe[e]}`)]}),(0,G.jsx)(`div`,{className:`text-[10px] text-bambu-gray`,children:t(`virtualPrinter.mode.${YWe[e]}Desc`)})]},e))})]}),o===`proxy`&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-sm text-white font-medium block mb-1`,children:t(`virtualPrinter.targetPrinter.title`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:c??``,onChange:e=>{let t=parseInt(e.target.value,10);l(isNaN(t)?null:t)},className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-2 text-white text-sm appearance-none cursor-pointer pr-10`,children:[(0,G.jsx)(`option`,{value:``,children:t(`virtualPrinter.targetPrinter.placeholder`)}),u?.map(e=>(0,G.jsxs)(`option`,{value:e.id,children:[e.name,` (`,e.ip_address,`)`]},e.id))]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:t(`virtualPrinter.addDialog.hint`)}),(0,G.jsxs)(`div`,{className:`flex gap-3 pt-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:e,className:`flex-1`,disabled:d.isPending,children:t(`common.cancel`)}),(0,G.jsx)(Q,{variant:`primary`,onClick:()=>d.mutate(),className:`flex-1`,disabled:d.isPending,children:d.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):t(`virtualPrinter.addDialog.create`)})]})]})})})}function ZWe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),[r,i]=(0,y.useState)(!1),{data:a,isLoading:o}=K({queryKey:[`virtual-printers`],queryFn:Cd.list,refetchInterval:1e4}),{data:s}=K({queryKey:[`virtual-printer-settings`],queryFn:Sd.getSettings}),c=q({mutationFn:e=>Sd.updateSettings({archive_name_source:e}),onSuccess:()=>{t.invalidateQueries({queryKey:[`virtual-printer-settings`]}),n(e(`virtualPrinter.toast.updated`))},onError:t=>{n(t.message||e(`virtualPrinter.toast.failedToUpdate`),`error`)}}),l=s?.archive_name_source===`filename`,{data:u}=K({queryKey:[`vp-ca-certificate`],queryFn:Cd.getCaCertificate,staleTime:1/0}),[d,f]=(0,y.useState)(!1),p=async()=>{u&&(await WWe(u.pem)?(f(!0),n(e(`virtualPrinter.caCert.copied`)),setTimeout(()=>f(!1),2e3)):n(e(`virtualPrinter.toast.copyFailed`),`error`))},m=()=>{u&&GWe(u.pem,`bambuddy-virtual-printer-ca.crt`,`application/x-pem-file`)};if(o)return(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-8 flex justify-center`,children:(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin text-bambu-green`})})});let h=a?.printers||[],g=a?.models||{};return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-1 lg:grid-cols-3 gap-4 items-stretch`,children:[(0,G.jsx)(Ld,{className:`border-l-4 border-l-yellow-500`,children:(0,G.jsx)(zd,{className:`py-3 px-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-500 flex-shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{className:`text-xs`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`virtualPrinter.setupRequired.title`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:e(`virtualPrinter.setupRequired.description`)}),(0,G.jsxs)(`a`,{href:`https://wiki.bambuddy.cool/features/virtual-printer/`,target:`_blank`,rel:`noopener noreferrer`,className:`inline-flex items-center gap-1.5 mt-2 px-3 py-1.5 bg-yellow-100 dark:bg-yellow-500/20 border border-yellow-500/50 rounded text-yellow-700 dark:text-yellow-400 hover:bg-yellow-500/30 transition-colors text-xs`,children:[(0,G.jsx)(nc,{className:`w-3 h-3`}),e(`virtualPrinter.setupRequired.readGuide`)]})]})]})})}),(0,G.jsx)(Ld,{className:`lg:col-span-2`,children:(0,G.jsx)(zd,{className:`py-3 px-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2`,children:[(0,G.jsx)(Uc,{className:`w-4 h-4 text-blue-600 dark:text-blue-400 flex-shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium mb-1`,children:e(`virtualPrinter.howItWorks.title`)}),(0,G.jsxs)(`ul`,{className:`space-y-1 list-disc list-inside`,children:[(0,G.jsx)(`li`,{children:e(`virtualPrinter.howItWorks.step1`)}),(0,G.jsx)(`li`,{children:e(`virtualPrinter.howItWorks.step2`)}),(0,G.jsx)(`li`,{children:e(`virtualPrinter.howItWorks.step3`)})]})]})]})})})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 lg:grid-cols-2 gap-4 items-stretch`,children:[(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-3 px-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(iu,{className:`w-4 h-4 text-bambu-green flex-shrink-0 mt-1`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white font-medium`,children:e(`virtualPrinter.caCert.title`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-shrink-0`,children:[(0,G.jsxs)(`button`,{onClick:p,disabled:!u,className:`inline-flex items-center gap-1.5 px-2.5 py-1 text-xs rounded bg-bambu-dark-secondary border border-bambu-dark-tertiary text-white hover:border-bambu-gray disabled:opacity-50 transition-colors`,children:[d?(0,G.jsx)(fs,{className:`w-3.5 h-3.5 text-bambu-green`}):(0,G.jsx)(Vs,{className:`w-3.5 h-3.5`}),e(d?`virtualPrinter.caCert.copied`:`virtualPrinter.caCert.copy`)]}),(0,G.jsxs)(`button`,{onClick:m,disabled:!u,className:`inline-flex items-center gap-1.5 px-2.5 py-1 text-xs rounded bg-bambu-dark-secondary border border-bambu-dark-tertiary text-white hover:border-bambu-gray disabled:opacity-50 transition-colors`,children:[(0,G.jsx)(Ys,{className:`w-3.5 h-3.5`}),e(`virtualPrinter.caCert.download`)]})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`virtualPrinter.caCert.description`)}),u&&(0,G.jsxs)(`p`,{className:`text-[10px] text-bambu-gray font-mono mt-1 truncate`,title:u.fingerprint_sha256,children:[e(`virtualPrinter.caCert.fingerprint`),`: `,u.fingerprint_sha256]})]})]})})}),(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-3 px-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(dc,{className:`w-4 h-4 text-bambu-green flex-shrink-0 mt-1`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white font-medium`,children:e(`virtualPrinter.archiveNameSource.title`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-shrink-0`,children:[(0,G.jsx)(`span`,{className:`text-xs ${l?`text-bambu-gray`:`text-white`}`,children:e(`virtualPrinter.archiveNameSource.metadata`)}),(0,G.jsx)(hU,{checked:l,onChange:e=>c.mutate(e?`filename`:`metadata`),disabled:c.isPending}),(0,G.jsx)(`span`,{className:`text-xs ${l?`text-white`:`text-bambu-gray`}`,children:e(`virtualPrinter.archiveNameSource.filename`)})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`virtualPrinter.archiveNameSource.description`)})]})]})})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Ll,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`virtualPrinter.list.title`)}),(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[`(`,h.length,`)`]})]}),(0,G.jsxs)(Q,{variant:`primary`,onClick:()=>i(!0),children:[(0,G.jsx)(Pl,{className:`w-4 h-4 mr-1`}),e(`virtualPrinter.list.add`)]})]}),h.length===0?(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`py-8 text-center`,children:[(0,G.jsx)(Ll,{className:`w-12 h-12 text-bambu-gray mx-auto mb-3`}),(0,G.jsx)(`p`,{className:`text-bambu-gray mb-4`,children:e(`virtualPrinter.list.empty`)}),(0,G.jsxs)(Q,{variant:`primary`,onClick:()=>i(!0),children:[(0,G.jsx)(Pl,{className:`w-4 h-4 mr-1`}),e(`virtualPrinter.list.addFirst`)]})]})}):(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 xl:grid-cols-3 gap-4 items-start`,children:h.map(e=>(0,G.jsx)(JWe,{printer:e,models:g},e.id))}),r&&(0,G.jsx)(XWe,{onClose:()=>i(!1)})]})}function QWe(e){if(e<60)return`${e}s`;let t=Math.floor(e/60);if(t<60)return`${t}m`;let n=Math.floor(t/60),r=t%60;if(n<24)return r?`${n}h ${r}m`:`${n}h`;let i=Math.floor(n/24),a=n%24;return a?`${i}d ${a}h`:`${i}d`}function n5(e){return e==null?`—`:e>=1024?`${(e/1024).toFixed(1)} GB`:`${Math.round(e)} MB`}function $We({device:e,onUnregister:t,isDeleting:n}){let{t:r}=U(),{showToast:i}=Gd(),a=e.system_stats,o=a?.memory,s=a?.disk,c=e.online,[l,u]=(0,y.useState)(null),[d,f]=(0,y.useState)(null),p=async t=>{f(t);try{t===`update`?await Dd.triggerUpdate(e.device_id):await Dd.systemCommand(e.device_id,t),i(r(`settings.spoolbuddy.commandQueued`),`success`)}catch(e){i(e instanceof Error?e.message:r(`settings.spoolbuddy.commandError`),`error`)}finally{f(null),u(null)}},m=[{key:`update`,label:r(`settings.spoolbuddy.update`),icon:Ys},{key:`restart_browser`,label:r(`settings.spoolbuddy.restartBrowser`),icon:hl},{key:`restart_daemon`,label:r(`settings.spoolbuddy.restartDaemon`),icon:Vl},{key:`reboot`,label:r(`settings.spoolbuddy.reboot`),icon:Wl},{key:`shutdown`,label:r(`settings.spoolbuddy.shutdown`),icon:Il,variant:`danger`}],h={update:r(`settings.spoolbuddy.updateConfirmTitle`),restart_browser:r(`settings.spoolbuddy.restartBrowserConfirmTitle`),restart_daemon:r(`settings.spoolbuddy.restartDaemonConfirmTitle`),reboot:r(`settings.spoolbuddy.rebootConfirmTitle`),shutdown:r(`settings.spoolbuddy.shutdownConfirmTitle`)},g={update:r(`settings.spoolbuddy.updateConfirmBody`,{hostname:e.hostname}),restart_browser:r(`settings.spoolbuddy.restartBrowserConfirmBody`,{hostname:e.hostname}),restart_daemon:r(`settings.spoolbuddy.restartDaemonConfirmBody`,{hostname:e.hostname}),reboot:r(`settings.spoolbuddy.rebootConfirmBody`,{hostname:e.hostname}),shutdown:r(`settings.spoolbuddy.shutdownConfirmBody`,{hostname:e.hostname})};return(0,G.jsxs)(Ld,{children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-3 flex-wrap`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`h3`,{className:`text-base font-semibold text-white truncate`,children:e.hostname}),(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 px-2 py-0.5 rounded-full text-xs font-medium ${c?`bg-green-500/15 text-green-400 border border-green-500/40`:`bg-gray-500/15 text-gray-400 border border-gray-500/40`}`,children:[c?(0,G.jsx)(Zu,{className:`w-3 h-3`}):(0,G.jsx)(Xu,{className:`w-3 h-3`}),r(c?`settings.spoolbuddy.online`:`settings.spoolbuddy.offline`)]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray font-mono mt-1 truncate`,children:e.device_id})]}),(0,G.jsxs)(Q,{variant:`danger`,size:`sm`,onClick:()=>t(e),disabled:n,"aria-label":r(`settings.spoolbuddy.unregister`),children:[(0,G.jsx)(Nu,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:r(`settings.spoolbuddy.unregister`)})]})]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-2 sm:grid-cols-4 gap-3 text-xs`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-bambu-gray`,children:r(`settings.spoolbuddy.ipAddress`)}),(0,G.jsx)(`div`,{className:`text-white font-mono`,children:e.ip_address})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-bambu-gray`,children:r(`settings.spoolbuddy.firmware`)}),(0,G.jsx)(`div`,{className:`text-white`,children:e.firmware_version??`—`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`text-bambu-gray flex items-center gap-1`,children:[(0,G.jsx)(js,{className:`w-3 h-3`}),r(`settings.spoolbuddy.lastSeen`)]}),(0,G.jsx)(`div`,{className:`text-white`,children:e.last_seen?sp(e.last_seen):r(`settings.spoolbuddy.never`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-bambu-gray`,children:r(`settings.spoolbuddy.daemonUptime`)}),(0,G.jsx)(`div`,{className:`text-white`,children:QWe(e.uptime_s)})]})]}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-2`,children:m.map(({key:e,label:t,icon:n,variant:r})=>(0,G.jsxs)(Q,{variant:r??`secondary`,size:`sm`,onClick:()=>u(e),disabled:!c||d!==null,"aria-label":t,children:[d===e?(0,G.jsx)(Y,{className:`w-3.5 h-3.5 animate-spin`}):(0,G.jsx)(n,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`span`,{children:t})]},e))}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3 text-xs flex-wrap`,children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-bambu-gray`,children:[e.nfc_ok?(0,G.jsx)(Ss,{className:`w-3.5 h-3.5 text-green-400`}):(0,G.jsx)(Ds,{className:`w-3.5 h-3.5 text-red-400`}),r(`settings.spoolbuddy.nfc`),e.nfc_reader_type&&(0,G.jsxs)(`span`,{className:`text-bambu-gray/70`,children:[`(`,e.nfc_reader_type,`)`]})]}),(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-bambu-gray`,children:[e.scale_ok?(0,G.jsx)(Ss,{className:`w-3.5 h-3.5 text-green-400`}):(0,G.jsx)(Ds,{className:`w-3.5 h-3.5 text-red-400`}),r(`settings.spoolbuddy.scale`)]})]}),a&&(0,G.jsxs)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 lg:grid-cols-4 gap-3 text-xs`,children:[a.cpu_temp_c!==void 0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(ju,{className:`w-3.5 h-3.5 text-bambu-gray`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-bambu-gray`,children:r(`settings.spoolbuddy.cpuTemp`)}),(0,G.jsxs)(`div`,{className:`text-white`,children:[a.cpu_temp_c.toFixed(1),`°C`]})]})]}),a.load_avg&&a.load_avg.length>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Mo,{className:`w-3.5 h-3.5 text-bambu-gray`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-bambu-gray`,children:r(`settings.spoolbuddy.cpuLoad`)}),(0,G.jsxs)(`div`,{className:`text-white`,children:[a.load_avg[0].toFixed(2),a.cpu_count?` / ${a.cpu_count} (${Math.round(a.load_avg[0]/a.cpu_count*100)}%)`:``]})]})]}),o&&o.percent!==void 0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Hs,{className:`w-3.5 h-3.5 text-bambu-gray`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-bambu-gray`,children:r(`settings.spoolbuddy.memory`)}),(0,G.jsxs)(`div`,{className:`text-white`,children:[o.percent.toFixed(0),`% (`,n5(o.used_mb),` / `,n5(o.total_mb),`)`]})]})]}),s&&s.percent!==void 0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Nc,{className:`w-3.5 h-3.5 text-bambu-gray`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-bambu-gray`,children:r(`settings.spoolbuddy.disk`)}),(0,G.jsxs)(`div`,{className:`text-white`,children:[s.percent.toFixed(0),`% (`,s.used_gb?.toFixed(1),` / `,s.total_gb?.toFixed(1),` GB)`]})]})]}),a.system_uptime_s!==void 0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(js,{className:`w-3.5 h-3.5 text-bambu-gray`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-bambu-gray`,children:r(`settings.spoolbuddy.systemUptime`)}),(0,G.jsx)(`div`,{className:`text-white`,children:QWe(a.system_uptime_s)})]})]})]}),a.os&&(0,G.jsx)(`div`,{className:`mt-3 text-xs text-bambu-gray font-mono truncate`,children:[a.os.os,a.os.kernel,a.os.arch,a.os.python&&`Python ${a.os.python}`].filter(Boolean).join(` · `)})]})]}),l&&(0,G.jsx)(rf,{variant:l===`shutdown`||l===`reboot`?`danger`:`default`,title:h[l],message:g[l],confirmText:r(`settings.spoolbuddy.commandConfirm`),isLoading:d!==null,onConfirm:()=>p(l),onCancel:()=>u(null)})]})}function eGe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),[r,i]=(0,y.useState)(null),{data:a=[],isLoading:o}=K({queryKey:[`spoolbuddy-devices`],queryFn:()=>Dd.getDevices(),refetchInterval:15e3}),s=q({mutationFn:e=>Dd.deleteDevice(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`spoolbuddy-devices`]}),n(e(`settings.spoolbuddy.unregisterSuccess`),`success`),i(null)},onError:t=>{n(t.message||e(`settings.spoolbuddy.unregisterError`),`error`)}});if(o)return(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-8 flex justify-center`,children:(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin text-bambu-green`})})});let c=a.length>1;return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-3 px-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-xs`,children:[(0,G.jsx)(Uc,{className:`w-4 h-4 text-blue-400 flex-shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{className:`text-bambu-gray`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium mb-1`,children:e(`settings.spoolbuddy.infoTitle`)}),(0,G.jsx)(`p`,{children:e(`settings.spoolbuddy.infoBody`)})]})]})})}),c&&(0,G.jsx)(Ld,{className:`border-l-4 border-l-yellow-500`,children:(0,G.jsx)(zd,{className:`py-3 px-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-xs`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-500 flex-shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{className:`text-bambu-gray`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium mb-1`,children:e(`settings.spoolbuddy.duplicatesTitle`,{count:a.length})}),(0,G.jsx)(`p`,{children:e(`settings.spoolbuddy.duplicatesBody`)})]})]})})}),a.length===0?(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-8 text-center text-bambu-gray text-sm`,children:e(`settings.spoolbuddy.empty`)})}):(0,G.jsx)(`div`,{className:`space-y-3`,children:a.map(e=>(0,G.jsx)($We,{device:e,onUnregister:i,isDeleting:s.isPending&&s.variables===e.device_id},e.id))}),r&&(0,G.jsx)(rf,{variant:`danger`,title:e(`settings.spoolbuddy.confirmTitle`),message:e(`settings.spoolbuddy.confirmBody`,{hostname:r.hostname,deviceId:r.device_id}),confirmText:e(`settings.spoolbuddy.unregister`),isLoading:s.isPending,onConfirm:()=>s.mutate(r.device_id),onCancel:()=>i(null)})]})}function tGe(e,t,n,r,i){return n?e(`backup.restoreFromGit.${t}.${n}`,{...r??{},defaultValue:i??n}):i}var r5=[{id:`archives`,labelKey:`backup.printArchives`,icon:(0,G.jsx)(Po,{className:`w-4 h-4`})},{id:`spools`,labelKey:`backup.spoolInventory`,icon:(0,G.jsx)(Cl,{className:`w-4 h-4`})},{id:`settings`,labelKey:`backup.appSettings`,icon:(0,G.jsx)(nu,{className:`w-4 h-4`})},{id:`kprofiles`,labelKey:`backup.kProfiles`,icon:(0,G.jsx)(ju,{className:`w-4 h-4`})}],nGe=Object.fromEntries(r5.map(e=>[e.id,e.labelKey])),rGe=`HEAD`;function iGe({onClose:e}){let{t}=U(),n=co(),[r,i]=(0,y.useState)(rGe),[a,o]=(0,y.useState)({}),[s,c]=(0,y.useState)(!1),[l,u]=(0,y.useState)(!1),[d,f]=(0,y.useState)(null),p=K({queryKey:[`github-backup-commits`],queryFn:()=>Z.getGitHubBackupCommits(20)}),m=K({queryKey:[`github-restore-preview`,r],queryFn:()=>Z.getGitHubRestorePreview(r)}),h=m.data?.success?m.data.ref:r,g=(0,y.useMemo)(()=>{let e={};return m.data?.categories?.forEach(n=>{e[n.category]={available:n.available,itemCount:n.item_count,detail:tGe(t,`details`,n.detail_code,n.detail_params,n.detail)}}),e},[m.data,t]),_=(0,y.useMemo)(()=>r5.filter(e=>a[e.id]&&g[e.id]?.available).map(e=>e.id),[a,g]),v=_.length,b=!s&&_.includes(`kprofiles`),x=q({mutationFn:()=>Z.restoreFromGitHub({ref:h,categories:_,overwrite_existing:s}),onSuccess:e=>{u(!1);let t=Object.keys(e.results??{}).length>0;(e.success||t)&&(f(e),n.invalidateQueries({queryKey:[`spools`]}),n.invalidateQueries({queryKey:[`archives`]}),n.invalidateQueries({queryKey:[`settings`]})),n.invalidateQueries({queryKey:[`github-backup-logs`]}),n.invalidateQueries({queryKey:[`github-backup-status`]})},onError:()=>u(!1)}),S=x.isPending,C=!!(d&&`settings`in d.results),w=(0,y.useCallback)(()=>{if(C){window.location.reload();return}e()},[C,e]);(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&!S&&!l&&w()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[w,S,l]),(0,y.useEffect)(()=>{if(!S)return;let e=e=>{e.preventDefault(),e.returnValue=``};return window.addEventListener(`beforeunload`,e),()=>window.removeEventListener(`beforeunload`,e)},[S]),(0,y.useEffect)(()=>{m.data&&o(e=>{let t={};return r5.forEach(n=>{t[n.id]=!!e[n.id]&&!!g[n.id]?.available}),t})},[m.data,g]);let T=p.data?.commits??[],E=(e,t,n)=>{let r=(t||``).split(`
-`)[0],i=n?new Date(n).toLocaleString():``;return`${e.slice(0,7)} — ${i}${r?` — ${r}`:``}`},D=e=>e.isError?e.error?.message||t(`backup.restoreFromGit.loadFailed`):null,O=D(m)??(m.data&&!m.data.success?m.data.message:null),k=D(p)??(p.data&&!p.data.success?p.data.message:null);return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,onClick:S?void 0:w,children:(0,G.jsx)(Ld,{className:`w-full max-w-lg`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(zd,{className:`p-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-full bg-bambu-green/20 text-bambu-green`,children:(0,G.jsx)(Ul,{className:`w-5 h-5`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white`,children:t(`backup.restoreFromGit.title`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:t(`backup.restoreFromGit.subtitle`)})]})]}),(0,G.jsx)(`button`,{onClick:w,disabled:S,"aria-label":t(`common.close`),className:`p-2 hover:bg-bambu-dark-tertiary rounded-lg transition-colors disabled:opacity-50`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),d?(0,G.jsxs)(`div`,{className:`p-4 space-y-3 max-h-[400px] overflow-y-auto`,children:[(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-sm`,children:[d.success?(0,G.jsx)(Ss,{className:`w-4 h-4 text-bambu-green mt-0.5 flex-shrink-0`}):(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-500 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-white`,children:d.message})]}),!d.success&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:t(`backup.restoreFromGit.partialHint`)}),Object.entries(d.results).map(([e,n])=>(0,G.jsxs)(`div`,{className:`p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm font-medium text-white`,children:nGe[e]?t(nGe[e]):e}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:t(`backup.restoreFromGit.tally`,{restored:n.restored,skipped:n.skipped,failed:n.failed})})]}),n.notes.length>0&&(0,G.jsx)(`ul`,{className:`mt-2 space-y-1`,children:n.notes.map(e=>(0,G.jsxs)(`li`,{className:`text-xs text-bambu-gray flex items-start gap-1.5`,children:[(0,G.jsx)(Uc,{className:`w-3 h-3 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`span`,{children:tGe(t,`notes`,e.code,e.params,e.message)})]},`${e.code}:${JSON.stringify(e.params)}`))})]},e)),(0,G.jsx)(`div`,{className:`p-3 rounded-lg bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30`,children:(0,G.jsx)(`p`,{className:`text-xs text-yellow-700 dark:text-yellow-200`,children:t(`backup.restoreFromGit.reloadHint`)})})]}):(0,G.jsxs)(`div`,{className:`p-4 space-y-4 max-h-[400px] overflow-y-auto ${S?`opacity-50 pointer-events-none`:``}`,children:[x.isError&&(0,G.jsx)(`div`,{className:`p-3 rounded-lg bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30`,children:(0,G.jsx)(`p`,{className:`text-sm text-red-700 dark:text-red-400`,children:x.error?.message||t(`backup.restoreFromGit.failed`)})}),x.data&&!x.data.success&&(0,G.jsx)(`div`,{className:`p-3 rounded-lg bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30`,children:(0,G.jsx)(`p`,{className:`text-sm text-red-700 dark:text-red-400`,children:x.data.message})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`restore-commit`,className:`block text-sm font-medium text-white mb-1`,children:t(`backup.restoreFromGit.commitLabel`)}),(0,G.jsxs)(`select`,{id:`restore-commit`,value:r,onChange:e=>{i(e.target.value),x.reset()},disabled:S||p.isLoading,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`,children:[(0,G.jsx)(`option`,{value:rGe,children:t(`backup.restoreFromGit.latestCommit`)}),T.map(e=>(0,G.jsx)(`option`,{value:e.sha,children:E(e.sha,e.message,e.date)},e.sha))]}),k&&(0,G.jsx)(`p`,{className:`mt-1 text-xs text-red-500 dark:text-red-400`,children:k})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white mb-2`,children:t(`backup.restoreFromGit.categoriesLabel`)}),m.isLoading?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray p-3`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),t(`backup.restoreFromGit.inspecting`)]}):O?(0,G.jsx)(`div`,{className:`p-3 rounded-lg bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30`,children:(0,G.jsx)(`p`,{className:`text-sm text-red-700 dark:text-red-400`,children:O})}):(0,G.jsx)(`div`,{className:`space-y-2`,children:r5.map(e=>{let n=g[e.id],r=!!n?.available,i=!!a[e.id]&&r;return(0,G.jsxs)(`label`,{className:`flex items-center gap-3 p-3 rounded-lg transition-colors ${r?`cursor-pointer`:`cursor-not-allowed opacity-50`} ${i?`bg-bambu-green/10 border border-bambu-green/30`:`bg-bambu-dark hover:bg-bambu-dark-tertiary border border-transparent`}`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:i,disabled:!r||S,onChange:()=>o(t=>({...t,[e.id]:!t[e.id]})),className:`w-4 h-4 rounded border-bambu-gray bg-bambu-dark text-bambu-green focus:ring-bambu-green focus:ring-offset-0`}),(0,G.jsx)(`div`,{className:i?`text-bambu-green`:`text-bambu-gray`,children:e.icon}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsxs)(`div`,{className:`text-white text-sm font-medium`,children:[t(e.labelKey),r&&n?.itemCount?(0,G.jsx)(`span`,{className:`ml-2 text-xs text-bambu-gray`,children:t(`backup.restoreFromGit.itemCount`,{count:n.itemCount})}):null]}),n?.detail&&(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray`,children:n.detail}),e.id===`kprofiles`&&i&&b&&(0,G.jsx)(`div`,{className:`text-xs text-yellow-700 dark:text-yellow-200`,children:t(`backup.restoreFromGit.kprofilesOverwriteCaveat`)})]})]},e.id)})})]}),(0,G.jsx)(`div`,{className:`p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white`,children:t(`backup.restoreFromGit.overwriteLabel`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:t(s?`backup.restoreFromGit.overwriteOn`:`backup.restoreFromGit.overwriteOff`)})]}),(0,G.jsx)(hU,{checked:s,onChange:c,disabled:S})]})})]}),(0,G.jsx)(`div`,{className:`flex items-center justify-between p-4 border-t border-bambu-dark-tertiary`,children:d?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:w,children:t(`common.close`)}),(0,G.jsx)(Q,{onClick:()=>window.location.reload(),className:`bg-bambu-green hover:bg-bambu-green-dark`,children:t(`backup.reloadNow`)})]})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:t(`backup.restoreFromGit.selectedCount`,{count:v})}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:w,disabled:S,children:t(`common.cancel`)}),(0,G.jsx)(Q,{onClick:()=>u(!0),disabled:v===0||S,className:`bg-bambu-green hover:bg-bambu-green-dark disabled:opacity-50 disabled:cursor-not-allowed min-w-[100px]`,children:S?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 mr-2 animate-spin`}),t(`backup.restoreFromGit.restoring`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ul,{className:`w-4 h-4 mr-2`}),t(`backup.restore`)]})})]})]})})]})})}),l&&(0,G.jsx)(rf,{variant:`danger`,overlayZIndex:`z-[110]`,title:t(`backup.restoreFromGit.confirmTitle`),message:s?t(`backup.restoreFromGit.confirmMessageOverwrite`):b?`${t(`backup.restoreFromGit.confirmMessage`)} ${t(`backup.restoreFromGit.kprofilesOverwriteCaveat`)}`:t(`backup.restoreFromGit.confirmMessage`),confirmText:t(`backup.restore`),isLoading:S,loadingText:t(`backup.restoreFromGit.restoring`),onConfirm:()=>x.mutate(),onCancel:()=>u(!1)})]})}function i5(e){if(!e)return`-`;let t=ep(e);return t?t.toLocaleString():`-`}function a5({status:e}){if(!e)return null;let t={success:`bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-400`,failed:`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`,skipped:`bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`,running:`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`},n={success:(0,G.jsx)(xs,{className:`w-3 h-3`}),failed:(0,G.jsx)(Ds,{className:`w-3 h-3`}),skipped:(0,G.jsx)(uu,{className:`w-3 h-3`}),running:(0,G.jsx)(Y,{className:`w-3 h-3 animate-spin`})};return(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 px-2 py-0.5 rounded text-xs font-medium ${t[e]||`bg-gray-500/20 text-gray-400`}`,children:[n[e],e.charAt(0).toUpperCase()+e.slice(1)]})}var aGe={github:`backup.repoUrlPlaceholderGitHub`,gitea:`backup.repoUrlPlaceholderGitea`,forgejo:`backup.repoUrlPlaceholderForgejo`,gitlab:`backup.repoUrlPlaceholderGitLab`},oGe={github:`ghp_xxxxxxxxxxxx`,gitea:`your_access_token`,forgejo:`your_access_token`,gitlab:`glpat-xxxxxxxxxxxx`},sGe={github:`backup.tokenHintGitHub`,gitea:`backup.tokenHintGitea`,forgejo:`backup.tokenHintForgejo`,gitlab:`backup.tokenHintGitLab`};function cGe(e){return JSON.stringify(e)}function lGe(e,t){if(!t)return e;let n={};for(let r of Object.keys(e))e[r]!==t[r]&&(n[r]=e[r]);return n}function uGe(){let e=co(),{showToast:t}=Gd(),{t:n}=U(),{hasPermission:r}=jd(),i=r(`github:restore`),[a,o]=(0,y.useState)(``),[s,c]=(0,y.useState)(``),[l,u]=(0,y.useState)(`main`),[d,f]=(0,y.useState)(`github`),[p,m]=(0,y.useState)(!1),[h,g]=(0,y.useState)(`daily`),[_,v]=(0,y.useState)(!0),[b,x]=(0,y.useState)(!0),[S,C]=(0,y.useState)(!1),[w,T]=(0,y.useState)(!1),[E,D]=(0,y.useState)(!1),[O,k]=(0,y.useState)(!1),[A,j]=(0,y.useState)(!0),[M,N]=(0,y.useState)(!1),[P,F]=(0,y.useState)(!1),[I,L]=(0,y.useState)(``),[R,z]=(0,y.useState)(!1),[B,V]=(0,y.useState)(null),[ee,te]=(0,y.useState)(null),ne=(0,y.useRef)(null),[re,ie]=(0,y.useState)(!1),[ae,oe]=(0,y.useState)(null),[se,H]=(0,y.useState)(null),[ce,le]=(0,y.useState)(``),{data:ue,refetch:de}=K({queryKey:[`local-backup-status`],queryFn:Z.getLocalBackupStatus,refetchInterval:e=>e.state.data?.is_running?1e3:1e4}),{data:fe,refetch:pe}=K({queryKey:[`local-backup-files`],queryFn:Z.getLocalBackups,refetchInterval:3e4}),{data:me,refetch:he}=K({queryKey:[`local-backup-path-check`],queryFn:Z.checkLocalBackupPath,enabled:ue?.enabled===!0,refetchOnWindowFocus:!1});(0,y.useEffect)(()=>{ue?.path!==void 0&&le(ue.path)},[ue?.path]);let ge=q({mutationFn:Z.triggerLocalBackup,onSuccess:e=>{e.success?t(n(`backup.scheduledBackupComplete`)):t(e.message,`error`),de(),pe(),he()},onError:()=>t(n(`backup.scheduledBackupFailed`),`error`)}),_e=q({mutationFn:e=>Z.deleteLocalBackup(e),onSuccess:()=>{pe(),oe(null)}}),ve=q({mutationFn:async e=>(H(null),F(!0),te(null),L(n(`backup.restoring`)),Z.restoreLocalBackup(e)),onSuccess:e=>{F(!1),L(``),e.success?(te({success:!0,message:e.message}),t(n(`backup.backupRestoredRestart`),`success`)):(te({success:!1,message:e.message}),t(e.message,`error`))},onError:e=>{F(!1),L(``);let r=e instanceof Error?e.message:n(`backup.failedToRestore`);te({success:!1,message:r}),t(r,`error`)}});(0,y.useEffect)(()=>{if(M||P){let e=e=>(e.preventDefault(),e.returnValue=`A backup operation is in progress. Are you sure you want to leave?`,e.returnValue);return window.addEventListener(`beforeunload`,e),()=>window.removeEventListener(`beforeunload`,e)}},[M,P]);let[ye,be]=(0,y.useState)(!1),[xe,Se]=(0,y.useState)(null),[Ce,we]=(0,y.useState)(null),Te=(0,y.useRef)(null),Ee=(0,y.useRef)(null),De=(0,y.useRef)(null),Oe=(0,y.useRef)(null),ke=(0,y.useRef)(``),[Ae,je]=(0,y.useState)(!1),Me=(0,y.useMemo)(()=>({repository_url:a,branch:l,provider:d,allow_insecure_http:O,schedule_enabled:p,schedule_type:h,backup_kprofiles:_,backup_cloud_profiles:b,backup_settings:S,backup_spools:w,backup_archives:E,enabled:A}),[a,l,d,O,p,h,_,b,S,w,E,A]),Ne=(0,y.useMemo)(()=>cGe(Me),[Me]),{data:Pe,isLoading:Fe}=K({queryKey:[`github-backup-config`],queryFn:Z.getGitHubBackupConfig}),{data:Ie}=K({queryKey:[`github-backup-status`],queryFn:Z.getGitHubBackupStatus,refetchInterval:e=>e.state.data?.is_running?500:1e4}),{data:Le}=K({queryKey:[`github-backup-logs`],queryFn:()=>Z.getGitHubBackupLogs(20)}),{data:Re}=K({queryKey:[`cloud-status`],queryFn:Z.getCloudStatus}),{data:ze}=K({queryKey:[`github-backup-cloud-accounts`],queryFn:Z.getGitHubBackupCloudAccounts,staleTime:6e4}),Be=(ze?.bambu??0)+(ze?.orca??0),Ve=ze?Be>0:!!Re?.is_authenticated,{data:He}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),Ue=Co({queries:(He??[]).map(e=>({queryKey:[`printerStatus`,e.id],queryFn:()=>Z.getPrinterStatus(e.id),staleTime:1e4,refetchInterval:3e4}))}),We=(He??[]).map((e,t)=>({printer:e,connected:Ue[t]?.data?.connected??!1})),Ge=We.length,Ke=We.filter(e=>e.connected).length,qe=Ge>0&&Ke===0,Je=Ke>0&&Ke<Ge;(0,y.useEffect)(()=>(De.current&&clearTimeout(De.current),Pe?(je(!1),Oe.current={repository_url:Pe.repository_url,branch:Pe.branch,provider:Pe.provider??`github`,allow_insecure_http:Pe.allow_insecure_http??!1,schedule_enabled:Pe.schedule_enabled,schedule_type:Pe.schedule_type,backup_kprofiles:Pe.backup_kprofiles,backup_cloud_profiles:Pe.backup_cloud_profiles,backup_settings:Pe.backup_settings,backup_spools:Pe.backup_spools,backup_archives:Pe.backup_archives,enabled:Pe.enabled},o(Pe.repository_url),u(Pe.branch),f(Pe.provider??`github`),m(Pe.schedule_enabled),g(Pe.schedule_type),v(Pe.backup_kprofiles),x(Pe.backup_cloud_profiles),C(Pe.backup_settings),T(Pe.backup_spools),D(Pe.backup_archives),k(Pe.allow_insecure_http??!1),j(Pe.enabled),c(``),De.current=setTimeout(()=>{je(!0)},100)):(je(!1),Oe.current=null,c(``)),()=>{De.current&&clearTimeout(De.current)}),[Pe]);let Ye=(0,y.useCallback)(async(r=!1)=>{if(Pe)try{r&&s?(await Z.saveGitHubBackupConfig({...Me,access_token:s}),c(``),we(null),t(n(`backup.tokenUpdated`)),ke.current=``):(await Z.updateGitHubBackupConfig(lGe(Me,Oe.current)),we(null),t(n(`backup.settingsSaved`))),Oe.current=Me,e.invalidateQueries({queryKey:[`github-backup-config`]}),e.invalidateQueries({queryKey:[`github-backup-status`]})}catch(e){we(e.message)}},[Pe,s,Me,e,t,n]),Xe=(0,y.useRef)(Ye);(0,y.useEffect)(()=>{Xe.current=Ye},[Ye]),(0,y.useEffect)(()=>{if(!(!Ae||!Pe)&&!(Oe.current&&Ne===cGe(Oe.current)))return Te.current&&clearTimeout(Te.current),Te.current=setTimeout(()=>{Ye(!1)},500),()=>{Te.current&&clearTimeout(Te.current)}},[Ae,Pe,Ne,Ye]),(0,y.useEffect)(()=>{if(!(!Ae||!Pe||!s)&&s!==ke.current)return ke.current=s,Ee.current&&clearTimeout(Ee.current),Ee.current=setTimeout(()=>{Xe.current(!0)},1e3),()=>{Ee.current&&clearTimeout(Ee.current)}},[Ae,s,Pe]);let Ze=q({mutationFn:e=>Z.saveGitHubBackupConfig(e),onMutate:()=>{we(null)},onSuccess:()=>{e.invalidateQueries({queryKey:[`github-backup-config`]}),e.invalidateQueries({queryKey:[`github-backup-status`]}),t(n(`backup.githubBackupEnabled`)),c(``),je(!0)},onError:e=>{we(e.message)}}),Qe=q({mutationFn:Z.triggerGitHubBackup,onSuccess:r=>{e.invalidateQueries({queryKey:[`github-backup-status`]}),e.invalidateQueries({queryKey:[`github-backup-logs`]}),r.success?r.files_changed>0?t(n(`backup.backupCompleteFiles`,{count:r.files_changed})):t(n(`backup.backupSkippedNoChanges`)):t(n(`backup.backupFailed2`,{message:r.message}),`error`)},onError:e=>{t(n(`backup.backupFailed2`,{message:e.message}),`error`)}}),$e=q({mutationFn:()=>Z.clearGitHubBackupLogs(0),onSuccess:r=>{e.invalidateQueries({queryKey:[`github-backup-logs`]}),t(n(`backup.clearedLogs`,{count:r.deleted}))},onError:e=>{t(n(`backup.failedToClearLogs`,{message:e.message}),`error`)}}),et=async()=>{be(!0),Se(null);try{let e;if(s){if(!a){t(n(`backup.enterRepoUrl`),`error`),be(!1);return}e=await Z.testGitHubConnection(a,s,d)}else if(Pe?.has_token)e=await Z.testGitHubStoredConnection();else{t(n(`backup.enterRepoAndToken`),`error`),be(!1);return}Se({success:e.success,message:e.message,isPrivate:e.is_private})}catch(e){Se({success:!1,message:e.message,isPrivate:null})}finally{be(!1)}};return Fe?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-12`,children:(0,G.jsx)(Y,{className:`w-8 h-8 animate-spin text-bambu-green`})}):(0,G.jsxs)(`div`,{className:`grid grid-cols-1 lg:grid-cols-2 gap-6`,children:[(0,G.jsxs)(`div`,{className:`space-y-6`,children:[(0,G.jsxs)(Ld,{id:`card-backup-github`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Oc,{className:`w-5 h-5 text-gray-400`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:n(`backup.githubBackup`)})]}),Pe&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:n(`backup.enabled`)}),(0,G.jsx)(hU,{checked:A,onChange:j})]})]})}),(0,G.jsxs)(zd,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`backup.githubDescription`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`git-provider-select`,className:`block text-sm text-bambu-gray mb-1`,children:n(`backup.provider`)}),(0,G.jsxs)(`select`,{id:`git-provider-select`,value:d,onChange:e=>{f(e.target.value),Se(null),we(null)},className:`w-full h-10 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`github`,children:n(`backup.providerGitHub`)}),(0,G.jsx)(`option`,{value:`gitlab`,children:n(`backup.providerGitLab`)}),(0,G.jsx)(`option`,{value:`gitea`,children:n(`backup.providerGitea`)}),(0,G.jsx)(`option`,{value:`forgejo`,children:n(`backup.providerForgejo`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`backup.repositoryUrl`)}),(0,G.jsx)(`input`,{type:`text`,value:a,onChange:e=>{o(e.target.value),Se(null),we(null)},placeholder:n(aGe[d]),className:`w-full h-10 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsxs)(`label`,{className:`flex items-start gap-2 mt-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:O,onChange:e=>{k(e.target.checked),Se(null)},className:`w-4 h-4 mt-0.5 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`backup.allowInsecureHttp`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`backup.allowInsecureHttpHint`)})]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[n(`backup.personalAccessToken`),` `,Pe?.has_token&&(0,G.jsx)(`span`,{className:`text-green-700 dark:text-green-400`,children:n(`backup.tokenSaved`)})]}),(0,G.jsx)(`input`,{type:`password`,value:s,onChange:e=>{c(e.target.value),Se(null),we(null)},placeholder:Pe?.has_token?n(`backup.enterNewToken`):oGe[d],className:`w-full h-10 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(sGe[d])})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`backup.branch`)}),(0,G.jsx)(`input`,{type:`text`,value:l,onChange:e=>u(e.target.value),placeholder:`main`,className:`w-full h-10 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`backup.autoBackup`)}),(0,G.jsxs)(`select`,{value:p?h:`disabled`,onChange:e=>{e.target.value===`disabled`?m(!1):(m(!0),g(e.target.value))},className:`w-full h-10 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`disabled`,children:n(`backup.manualOnly`)}),(0,G.jsx)(`option`,{value:`hourly`,children:n(`backup.hourly`)}),(0,G.jsx)(`option`,{value:`daily`,children:n(`backup.daily`)}),(0,G.jsx)(`option`,{value:`weekly`,children:n(`backup.weekly`)})]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-2`,children:n(`backup.includeInBackup`)}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`label`,{className:`flex items-start gap-2 ${qe?`cursor-not-allowed opacity-60`:`cursor-pointer`}`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:_,onChange:e=>v(e.target.checked),className:`w-4 h-4 mt-0.5 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`,disabled:qe}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-sm ${qe?`text-bambu-gray`:`text-white`}`,children:n(`backup.kProfiles`)}),qe&&(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 px-1.5 py-0.5 rounded text-xs bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`,children:[(0,G.jsx)(Iu,{className:`w-3 h-3`}),n(`backup.noPrintersConnected`)]}),Je&&(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 px-1.5 py-0.5 rounded text-xs bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`,children:[(0,G.jsx)(Iu,{className:`w-3 h-3`}),n(`backup.printersConnected`,{connected:Ke,total:Ge})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`backup.kProfilesDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-start gap-2 ${Ve?`cursor-pointer`:`cursor-not-allowed opacity-60`}`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:b,onChange:e=>x(e.target.checked),className:`w-4 h-4 mt-0.5 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`,disabled:!Ve}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-sm ${Ve?`text-white`:`text-bambu-gray`}`,children:n(`backup.cloudProfiles`)}),!Ve&&(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 px-1.5 py-0.5 rounded text-xs bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`,children:[(0,G.jsx)(Iu,{className:`w-3 h-3`}),n(`backup.cloudLoginRequiredShort`)]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`backup.cloudProfilesDescription`)}),Be>0&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:n(`backup.cloudProfilesAccounts`,{bambu:ze?.bambu??0,orca:ze?.orca??0})})]})]}),(0,G.jsxs)(`label`,{className:`flex items-start gap-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:S,onChange:e=>C(e.target.checked),className:`w-4 h-4 mt-0.5 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white text-sm`,children:n(`backup.appSettings`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`backup.appSettingsDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-start gap-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:w,onChange:e=>T(e.target.checked),className:`w-4 h-4 mt-0.5 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white text-sm`,children:n(`backup.spoolInventory`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`backup.spoolInventoryDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-start gap-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:E,onChange:e=>D(e.target.checked),className:`w-4 h-4 mt-0.5 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white text-sm`,children:n(`backup.printArchives`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`backup.printArchivesDescription`)})]})]})]})]}),(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary pt-4 space-y-3`,children:[Ie?.configured&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-sm`,children:[(0,G.jsx)(`div`,{className:`flex items-center gap-2 text-bambu-gray`,children:Ie.last_backup_at?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`span`,{children:[n(`backup.lastBackupAt`),` `,sp(Ie.last_backup_at,`system`,n)]}),(0,G.jsx)(a5,{status:Ie.last_backup_status})]}):(0,G.jsx)(`span`,{children:n(`backup.noBackupsYet`)})}),Ie.next_scheduled_run&&(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[(0,G.jsx)(js,{className:`w-3 h-3 inline mr-1`}),n(`backup.next`),` `,sp(Ie.next_scheduled_run,`system`,n)]})]}),Ce&&(0,G.jsxs)(`div`,{className:`text-sm text-red-700 dark:text-red-400 bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 rounded p-3 flex items-start gap-2`,children:[(0,G.jsx)(Ds,{className:`w-4 h-4 mt-0.5 shrink-0`}),(0,G.jsx)(`div`,{className:`flex-1 leading-relaxed whitespace-pre-wrap break-words`,children:Ce}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>we(null),className:`text-bambu-gray hover:text-white shrink-0`,"aria-label":n(`common.dismiss`,`Dismiss`),children:(0,G.jsx)(Ds,{className:`w-4 h-4`})})]}),xe&&(0,G.jsxs)(`div`,{className:`space-y-1.5`,children:[(0,G.jsxs)(`div`,{className:`text-sm flex items-center gap-1 ${xe.success?`text-green-700 dark:text-green-400`:`text-red-700 dark:text-red-400`}`,children:[xe.success?(0,G.jsx)(xs,{className:`w-4 h-4`}):(0,G.jsx)(Ds,{className:`w-4 h-4`}),xe.message]}),xe.success&&xe.isPrivate===!0&&(0,G.jsxs)(`div`,{className:`text-xs flex items-center gap-1 text-green-700 dark:text-green-400`,children:[(0,G.jsx)(xs,{className:`w-3.5 h-3.5`}),n(`backup.repoIsPrivate`,`Repository is private — safe to back up to.`)]}),xe.success&&xe.isPrivate===!1&&(0,G.jsxs)(`div`,{className:`text-xs text-red-700 dark:text-red-400 bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 rounded p-2 flex items-start gap-1.5`,children:[(0,G.jsx)(Ds,{className:`w-4 h-4 mt-0.5 shrink-0`}),(0,G.jsx)(`span`,{children:n(`backup.repoIsPublicWarning`,`Repository is PUBLIC. Bambuddy backups include MQTT credentials, Home Assistant tokens, Prometheus tokens, your Bambu Cloud email, and printer access codes via K-profiles. Saving is blocked until you make the repository private in your provider's settings.`)})]}),xe.success&&xe.isPrivate===null&&(0,G.jsxs)(`div`,{className:`text-xs text-yellow-700 dark:text-yellow-400 bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30 rounded p-2 flex items-start gap-1.5`,children:[(0,G.jsx)(Ds,{className:`w-4 h-4 mt-0.5 shrink-0`}),(0,G.jsx)(`span`,{children:n(`backup.repoVisibilityUnknown`,`Could not determine repository visibility. Bambuddy refuses to back up to anything not confirmed private; saving will be blocked.`)})]})]}),(0,G.jsx)(`div`,{className:`flex flex-wrap items-center gap-2`,children:Ie?.configured?(0,G.jsx)(G.Fragment,{children:Qe.isPending||Ie.is_running?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-green`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),(0,G.jsx)(`span`,{className:`text-sm`,children:Ie.progress||n(`backup.startingBackup`)})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(Q,{variant:`primary`,size:`sm`,onClick:()=>Qe.mutate(),disabled:!Pe?.enabled,children:[(0,G.jsx)(Ml,{className:`w-4 h-4`}),n(`backup.backupNow`)]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:et,disabled:ye,children:[ye?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Vl,{className:`w-4 h-4`}),n(`backup.test`)]}),i&&(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>ie(!0),disabled:Ie.restore_running,children:[(0,G.jsx)(Ul,{className:`w-4 h-4`}),n(`backup.restoreFromGit.button`)]})]})}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(Q,{variant:`primary`,size:`sm`,onClick:()=>{if(!a){t(n(`backup.repoRequired`),`error`);return}if(!s){t(n(`backup.tokenRequired`),`error`);return}Ze.mutate({repository_url:a,access_token:s,branch:l,provider:d,allow_insecure_http:O,schedule_enabled:p,schedule_type:h,backup_kprofiles:_,backup_cloud_profiles:b,backup_settings:S,backup_spools:w,backup_archives:E,enabled:A})},disabled:Ze.isPending||!a||!s,children:[Ze.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(xs,{className:`w-4 h-4`}),n(`backup.enableBackup`)]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:et,disabled:ye||!a||!s,children:[ye?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Vl,{className:`w-4 h-4`}),n(`backup.testConnection`)]})]})})]})]})]}),Le&&Le.length>0&&(0,G.jsxs)(Ld,{id:`card-backup-history`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Rc,{className:`w-5 h-5 text-gray-400`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:n(`backup.history`)})]}),(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:()=>$e.mutate(),disabled:$e.isPending,children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),n(`backup.clear`)]})]})}),(0,G.jsx)(zd,{children:(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`text-bambu-gray border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`th`,{className:`text-left py-2 px-2`,children:n(`backup.date`)}),(0,G.jsx)(`th`,{className:`text-left py-2 px-2`,children:n(`backup.trigger`)}),(0,G.jsx)(`th`,{className:`text-left py-2 px-2`,children:n(`backup.status`)}),(0,G.jsx)(`th`,{className:`text-left py-2 px-2`,children:n(`backup.commit`)})]})}),(0,G.jsx)(`tbody`,{children:Le.slice(0,10).map(e=>(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/50 hover:bg-bambu-dark-secondary`,children:[(0,G.jsx)(`td`,{className:`py-2 px-2 text-white`,children:i5(e.started_at)}),(0,G.jsx)(`td`,{className:`py-2 px-2 text-bambu-gray`,children:n(`backup.triggers.${e.trigger}`,{defaultValue:e.trigger})}),(0,G.jsx)(`td`,{className:`py-2 px-2`,children:(0,G.jsx)(a5,{status:e.status})}),(0,G.jsx)(`td`,{className:`py-2 px-2`,children:e.commit_sha?(0,G.jsxs)(`a`,{href:`${Pe?.repository_url}/commit/${e.commit_sha}`,target:`_blank`,rel:`noopener noreferrer`,className:`text-bambu-green hover:underline inline-flex items-center gap-1`,children:[e.commit_sha.substring(0,7),(0,G.jsx)(nc,{className:`w-3 h-3`})]}):(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`-`})})]},e.id))})]})})})]})]}),(0,G.jsxs)(`div`,{className:`space-y-6`,children:[(0,G.jsxs)(Ld,{id:`card-backup-local`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Ws,{className:`w-5 h-5 text-gray-400`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:n(`backup.localBackup`)})]})}),(0,G.jsxs)(zd,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`backup.localBackupDescription`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between py-3 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:n(`backup.downloadBackupLabel`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`backup.completeBackupZip`)})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,disabled:M||P,onClick:async()=>{N(!0),L(n(`backup.preparingBackup`));try{L(n(`backup.creatingArchive`));let{blob:e,filename:r}=await Z.exportBackup();L(n(`backup.downloadingFile`));let i=URL.createObjectURL(e),a=document.createElement(`a`);a.href=i,a.download=r,a.click(),URL.revokeObjectURL(i),t(n(`backup.backupDownloaded`))}catch(e){t(n(`backup.failedToCreateBackup`,{message:e instanceof Error?e.message:`Unknown error`}),`error`)}finally{N(!1),L(``)}},children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),n(`backup.download`)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between py-3 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:n(`backup.restoreBackup`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`backup.restoreDescription`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-light mt-1`,children:n(`backup.restoreNote`)})]}),(0,G.jsx)(`input`,{ref:ne,type:`file`,accept:`.zip`,className:`hidden`,onChange:e=>{let t=e.target.files?.[0];t&&(V(t),z(!0)),e.target.value=``}}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,disabled:P||M,onClick:()=>ne.current?.click(),children:[(0,G.jsx)(Bu,{className:`w-4 h-4`}),n(`backup.restore`)]})]}),ee&&(0,G.jsx)(`div`,{className:`p-3 rounded-lg ${ee.success?`bg-green-50 dark:bg-green-500/10 border border-green-300 dark:border-green-500/30`:`bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30`}`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-sm`,children:[ee.success?(0,G.jsx)(xs,{className:`w-4 h-4 text-green-600 dark:text-green-400 mt-0.5 flex-shrink-0`}):(0,G.jsx)(Ds,{className:`w-4 h-4 text-red-600 dark:text-red-400 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:ee.success?`text-green-800 dark:text-green-200`:`text-red-800 dark:text-red-200`,children:[ee.message,ee.success&&(0,G.jsx)(`div`,{className:`mt-2`,children:(0,G.jsxs)(Q,{size:`sm`,onClick:()=>window.location.reload(),children:[(0,G.jsx)(Ul,{className:`w-3 h-3`}),n(`backup.reloadNow`)]})})]})]})}),(0,G.jsx)(`div`,{className:`p-3 rounded-lg bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-sm`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-600 dark:text-yellow-400 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`text-yellow-800 dark:text-yellow-200`,children:[(0,G.jsx)(`span`,{className:`font-medium`,children:n(`backup.restoreReplacesAll`)}),` `,(0,G.jsx)(`span`,{className:`text-yellow-800/80 dark:text-yellow-200/70`,children:n(`backup.restoreReplacesAllDetail`)})]})]})})]})]}),(0,G.jsxs)(Ld,{id:`card-backup-scheduled`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(hc,{className:`w-5 h-5 text-gray-400`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:n(`backup.scheduledBackup`)})]}),(0,G.jsx)(hU,{checked:ue?.enabled??!1,onChange:async r=>{try{await Z.updateSettings({local_backup_enabled:r}),e.invalidateQueries({queryKey:[`settings`]}),t(n(`backup.settingsSaved`))}catch(e){t(n(`backup.failedToSave`,{message:e instanceof Error?e.message:`Unknown error`}),`error`)}de()}})]})}),(0,G.jsxs)(zd,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`backup.scheduledBackupDescription`)}),ue?.enabled&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-3 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`backup.frequency`)}),(0,G.jsxs)(`select`,{value:ue?.schedule??`daily`,className:`w-full h-10 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,onChange:async e=>{try{await Z.updateSettings({local_backup_schedule:e.target.value}),t(n(`backup.settingsSaved`))}catch(e){t(n(`backup.failedToSave`,{message:e instanceof Error?e.message:`Unknown error`}),`error`)}de()},children:[(0,G.jsx)(`option`,{value:`hourly`,children:n(`backup.hourly`)}),(0,G.jsx)(`option`,{value:`daily`,children:n(`backup.daily`)}),(0,G.jsx)(`option`,{value:`weekly`,children:n(`backup.weekly`)})]})]}),(ue?.schedule??`daily`)!==`hourly`&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`backup.backupTime`)}),(0,G.jsx)(`input`,{type:`time`,value:ue?.time??`03:00`,className:`w-full h-10 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,onChange:async e=>{try{await Z.updateSettings({local_backup_time:e.target.value}),t(n(`backup.settingsSaved`))}catch(e){t(n(`backup.failedToSave`,{message:e instanceof Error?e.message:`Unknown error`}),`error`)}de()}}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-light mt-1`,children:n(`backup.localTimeHint`,{tz:ue?.timezone||`UTC`})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`backup.retention`)}),(0,G.jsx)(`input`,{type:`number`,min:1,max:100,value:ue?.retention??5,className:`w-full h-10 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,onChange:async e=>{let r=Math.max(1,Math.min(100,parseInt(e.target.value)||5));try{await Z.updateSettings({local_backup_retention:r}),t(n(`backup.settingsSaved`))}catch(e){t(n(`backup.failedToSave`,{message:e instanceof Error?e.message:`Unknown error`}),`error`)}de()}}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-light mt-1`,children:n(`backup.retentionDescription`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`backup.outputPath`)}),(0,G.jsx)(`input`,{type:`text`,value:ce,onChange:e=>le(e.target.value),className:`w-full h-10 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,onBlur:async()=>{try{await Z.updateSettings({local_backup_path:ce}),t(n(`backup.settingsSaved`))}catch(e){t(n(`backup.failedToSave`,{message:e instanceof Error?e.message:`Unknown error`}),`error`)}de(),pe(),he()},onKeyDown:e=>{e.key===`Enter`&&e.target.blur()}}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-light mt-1`,children:ce?n(`backup.outputPathDescription`):(0,G.jsxs)(G.Fragment,{children:[n(`backup.defaultPathLabel`),` `,(0,G.jsx)(`code`,{className:`text-bambu-gray`,children:ue?.default_path||`...`})]})}),me&&!me.writable&&(0,G.jsx)(`div`,{className:`mt-2 p-3 rounded-lg bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-sm`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-red-600 dark:text-red-400 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`min-w-0 text-red-800 dark:text-red-200`,children:[(0,G.jsx)(`p`,{className:`font-medium`,children:n(`backup.pathCheck.title`)}),(0,G.jsx)(`p`,{className:`mt-1 text-red-800/80 dark:text-red-200/80`,children:n(`backup.pathCheck.${me.code}`,{path:me.path,defaultValue:me.message})}),me.remedy&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`p`,{className:`mt-2 font-medium`,children:n(`backup.pathCheck.howToFix`)}),(0,G.jsx)(`pre`,{className:`mt-1 p-2 rounded bg-black/10 dark:bg-black/40 text-xs whitespace-pre-wrap break-words`,children:me.remedy})]}),me.detail&&(0,G.jsx)(`p`,{className:`mt-2 text-xs text-red-800/60 dark:text-red-200/60 break-words`,children:me.detail})]})]})}),me?.writable&&me.warning===`container_ephemeral`&&(0,G.jsx)(`div`,{className:`mt-2 p-3 rounded-lg bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-sm`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-600 dark:text-yellow-400 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`min-w-0 text-yellow-800 dark:text-yellow-200`,children:[(0,G.jsx)(`p`,{className:`font-medium`,children:n(`backup.pathCheck.ephemeralTitle`)}),(0,G.jsx)(`p`,{className:`mt-1 text-yellow-800/80 dark:text-yellow-200/80`,children:n(`backup.pathCheck.container_ephemeral`,{path:me.path})}),me.remedy&&(0,G.jsx)(`pre`,{className:`mt-1 p-2 rounded bg-black/10 dark:bg-black/40 text-xs whitespace-pre-wrap break-words`,children:me.remedy})]})]})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between py-3 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`text-sm`,children:[ue?.last_backup_at&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray`,children:[(0,G.jsxs)(`span`,{children:[n(`backup.lastBackup`),`:`]}),(0,G.jsx)(a5,{status:ue.last_status}),(0,G.jsx)(`span`,{children:sp(ue.last_backup_at)})]}),ue?.next_run&&(0,G.jsxs)(`div`,{className:`text-bambu-gray mt-1`,children:[(0,G.jsxs)(`span`,{children:[n(`backup.nextBackup`),`: `]}),(0,G.jsx)(`span`,{children:i5(ue.next_run)})]})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,disabled:ue?.is_running||ge.isPending,onClick:()=>ge.mutate(),children:[ue?.is_running||ge.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Ml,{className:`w-4 h-4`}),ue?.is_running?n(`backup.backupRunning`):n(`backup.runNow`)]})]}),fe&&fe.length>0&&(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary pt-3`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white mb-2`,children:n(`backup.backupFiles`)}),(0,G.jsx)(`div`,{className:`space-y-1`,children:fe.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between py-1.5 px-2 rounded hover:bg-bambu-dark-tertiary/50 text-sm`,children:[(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`span`,{className:`text-white truncate block`,children:e.filename}),(0,G.jsxs)(`span`,{className:`text-bambu-gray text-xs`,children:[(e.size/1024/1024).toFixed(1),` MB · `,i5(e.created_at)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 flex-shrink-0`,children:[(0,G.jsx)(`button`,{className:`text-bambu-gray hover:text-bambu-green p-1`,title:n(`backup.download`),onClick:async()=>{try{let{blob:t,filename:n}=await Z.downloadLocalBackup(e.filename),r=URL.createObjectURL(t),i=document.createElement(`a`);i.href=r,i.download=n,i.click(),URL.revokeObjectURL(r)}catch{t(n(`backup.scheduledBackupFailed`),`error`)}},children:(0,G.jsx)(Ys,{className:`w-3.5 h-3.5`})}),(0,G.jsx)(`button`,{className:`text-bambu-gray hover:text-yellow-600 dark:hover:text-yellow-400 p-1`,title:n(`backup.restore`),onClick:()=>H(e.filename),children:(0,G.jsx)(Ul,{className:`w-3.5 h-3.5`})}),(0,G.jsx)(`button`,{className:`text-bambu-gray hover:text-red-600 dark:hover:text-red-400 p-1`,onClick:()=>oe(e.filename),title:n(`backup.deleteBackup`),children:(0,G.jsx)(Nu,{className:`w-3.5 h-3.5`})})]})]},e.filename))})]}),fe&&fe.length===0&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray text-center py-3 border-t border-bambu-dark-tertiary`,children:n(`backup.noScheduledBackups`)})]})]})]})]}),re&&(0,G.jsx)(iGe,{onClose:()=>ie(!1)}),ae&&(0,G.jsx)(rf,{title:n(`backup.deleteBackup`),message:n(`backup.deleteBackupConfirm`),confirmText:n(`backup.deleteBackup`),variant:`danger`,onConfirm:()=>_e.mutate(ae),onCancel:()=>oe(null)}),se&&(0,G.jsx)(rf,{title:n(`backup.restoreConfirmTitle`),message:n(`backup.restoreConfirmMessage`,{filename:se}),confirmText:n(`backup.restoreConfirmButton`),variant:`danger`,onConfirm:()=>ve.mutate(se),onCancel:()=>H(null)}),R&&B&&(0,G.jsx)(rf,{title:n(`backup.restoreConfirmTitle`),message:n(`backup.restoreConfirmMessage`,{filename:B.name}),confirmText:n(`backup.restoreConfirmButton`),variant:`danger`,onConfirm:async()=>{z(!1),F(!0),te(null);try{L(n(`backup.uploadingFile`));let e=await Z.importBackup(B);te(e),e.success?t(n(`backup.backupRestoredRestart`),`success`):t(e.message||n(`backup.failedToRestore`),`error`)}catch(e){let r=e instanceof Error?e.message:n(`backup.failedToRestore`);te({success:!1,message:r}),t(r,`error`)}finally{F(!1),L(``),V(null)}},onCancel:()=>{z(!1),V(null)}}),(M||P)&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/80 flex items-center justify-center z-[100]`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl p-8 max-w-md w-full mx-4 text-center`,children:[(0,G.jsx)(`div`,{className:`flex justify-center mb-4`,children:(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`div`,{className:`w-16 h-16 border-4 border-bambu-dark-tertiary rounded-full`}),(0,G.jsx)(`div`,{className:`w-16 h-16 border-4 border-bambu-green border-t-transparent rounded-full absolute inset-0 animate-spin`})]})}),(0,G.jsx)(`h3`,{className:`text-xl font-semibold text-white mb-2`,children:n(M?`backup.creatingBackup`:`backup.restoringBackup`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray mb-4`,children:I||n(M?`backup.preparing`:`backup.processing`)}),(0,G.jsx)(`div`,{className:`p-3 rounded-lg bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-sm`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-600 dark:text-yellow-400 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`p`,{className:`text-yellow-800 dark:text-yellow-200 text-left`,children:n(`backup.doNotClosePage`)})]})})]})})]})}function dGe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),[r,i]=(0,y.useState)(!1),[a,o]=(0,y.useState)(``),[s,c]=(0,y.useState)(``),[l,u]=(0,y.useState)(`medium`),[d,f]=(0,y.useState)(`notify`),[p,m]=(0,y.useState)(10),[h,g]=(0,y.useState)(null),[_,v]=(0,y.useState)(null),[b,x]=(0,y.useState)(!1),{data:S}=K({queryKey:[`settings`],queryFn:Z.getSettings}),{data:C,refetch:w}=K({queryKey:[`obico-status`],queryFn:Z.getObicoStatus,refetchInterval:1e4}),{data:T}=K({queryKey:[`printers`],queryFn:Z.getPrinters});(0,y.useEffect)(()=>{if(S){i(S.obico_enabled??!1),o(S.obico_ml_url??``),c(S.obico_ml_token??``),u(S.obico_sensitivity??`medium`),f(S.obico_action??`notify`),m(S.obico_poll_interval??10);try{let e=S.obico_enabled_printers?JSON.parse(S.obico_enabled_printers):null;g(Array.isArray(e)?e:null)}catch{g(null)}x(!0)}},[S]);let E=q({mutationFn:()=>Z.updateSettings({obico_enabled:r,obico_ml_url:a,obico_ml_token:s,obico_sensitivity:l,obico_action:d,obico_poll_interval:p,obico_enabled_printers:h===null?``:JSON.stringify(h)}),onSuccess:()=>{t.invalidateQueries({queryKey:[`settings`]}),t.invalidateQueries({queryKey:[`obico-status`]}),t.invalidateQueries({queryKey:[`obico-printer-status`]}),n(e(`settings.toast.settingsSaved`))}}),D=(0,y.useMemo)(()=>!b||!S?!1:S.obico_enabled!==r||S.obico_ml_url!==a||(S.obico_ml_token??``)!==s||S.obico_sensitivity!==l||S.obico_action!==d||S.obico_poll_interval!==p||S.obico_enabled_printers!==(h===null?``:JSON.stringify(h)),[S,b,r,a,s,l,d,p,h]);(0,y.useEffect)(()=>{if(!D)return;let e=setTimeout(()=>E.mutate(),500);return()=>clearTimeout(e)},[D,r,a,s,l,d,p,h]);let O=async()=>{v(null);try{D&&await E.mutateAsync();let t=await Z.testObicoConnection(a,s);t.ok?v({ok:!0,message:t.auth_ok===null?e(`failureDetection.testSuccessTokenUnknown`):e(`failureDetection.testSuccess`)}):v({ok:!1,message:t.error||`HTTP ${t.status_code??`?`} — ${t.body??e(`failureDetection.testFailed`)}`})}catch(e){v({ok:!1,message:e instanceof Error?e.message:String(e)})}},k=(e,t)=>{if(h===null){let n=T?.map(e=>e.id)??[];g(t?n:n.filter(t=>t!==e));return}g(t?[...h,e]:h.filter(t=>t!==e))};return(0,G.jsxs)(`div`,{className:`flex flex-col lg:flex-row gap-4 lg:gap-6`,children:[(0,G.jsxs)(`div`,{className:`space-y-3 flex-1 lg:max-w-xl`,children:[(0,G.jsxs)(Ld,{id:`card-fd-ml`,children:[(0,G.jsxs)(Rd,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Jl,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`failureDetection.title`)})]}),(0,G.jsx)(hU,{checked:r,onChange:i})]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-2`,children:e(`failureDetection.description`)})]}),(0,G.jsxs)(zd,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:e(`failureDetection.mlUrl`)}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`input`,{type:`text`,value:a,onChange:e=>o(e.target.value),placeholder:`http://192.168.1.10:3333`,className:`flex-1 bg-gray-800 border border-gray-700 rounded px-3 py-2 text-white text-sm`,disabled:!r}),(0,G.jsx)(Q,{onClick:O,disabled:!a||E.isPending,variant:`secondary`,children:e(`failureDetection.test`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`failureDetection.mlUrlHint`)}),(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1 mt-3`,children:e(`failureDetection.mlToken`)}),(0,G.jsx)(`input`,{type:`password`,value:s,onChange:e=>c(e.target.value),autoComplete:`off`,placeholder:e(`failureDetection.mlTokenPlaceholder`),className:`w-full bg-gray-800 border border-gray-700 rounded px-3 py-2 text-white text-sm`,disabled:!r}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`failureDetection.mlTokenHint`)}),_&&(0,G.jsxs)(`div`,{className:`flex items-start gap-2 mt-2 text-sm ${_.ok?`text-green-700 dark:text-green-400`:`text-red-700 dark:text-red-400`}`,children:[_.ok?(0,G.jsx)(fs,{className:`w-4 h-4 mt-0.5`}):(0,G.jsx)(td,{className:`w-4 h-4 mt-0.5`}),(0,G.jsx)(`span`,{children:_.message})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:e(`failureDetection.sensitivity`)}),(0,G.jsxs)(`select`,{value:l,onChange:e=>u(e.target.value),disabled:!r,className:`w-full bg-gray-800 border border-gray-700 rounded px-3 py-2 text-white text-sm`,children:[(0,G.jsx)(`option`,{value:`low`,children:e(`failureDetection.sensitivityLow`)}),(0,G.jsx)(`option`,{value:`medium`,children:e(`failureDetection.sensitivityMedium`)}),(0,G.jsx)(`option`,{value:`high`,children:e(`failureDetection.sensitivityHigh`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`failureDetection.sensitivityHint`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:e(`failureDetection.action`)}),(0,G.jsxs)(`select`,{value:d,onChange:e=>f(e.target.value),disabled:!r,className:`w-full bg-gray-800 border border-gray-700 rounded px-3 py-2 text-white text-sm`,children:[(0,G.jsx)(`option`,{value:`notify`,children:e(`failureDetection.actionNotify`)}),(0,G.jsx)(`option`,{value:`pause`,children:e(`failureDetection.actionPause`)}),(0,G.jsx)(`option`,{value:`pause_and_off`,children:e(`failureDetection.actionPauseOff`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:e(`failureDetection.pollInterval`)}),(0,G.jsx)(`input`,{type:`number`,value:p,onChange:e=>m(Math.max(5,Math.min(120,Number(e.target.value)||10))),min:5,max:120,disabled:!r,className:`w-full bg-gray-800 border border-gray-700 rounded px-3 py-2 text-white text-sm`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`failureDetection.pollIntervalHint`)})]}),C&&!C.external_url_configured&&r&&(0,G.jsxs)(`div`,{className:`flex items-start gap-2 p-3 bg-amber-50 dark:bg-amber-900/30 border border-amber-300 dark:border-amber-700 rounded text-sm text-amber-800 dark:text-amber-200`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`font-medium`,children:e(`failureDetection.externalUrlMissing`)}),(0,G.jsx)(`div`,{className:`text-xs mt-1`,children:e(`failureDetection.externalUrlHint`)})]})]})]})]}),(0,G.jsxs)(Ld,{id:`card-fd-perprinter`,children:[(0,G.jsxs)(Rd,{children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`failureDetection.perPrinterTitle`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:e(`failureDetection.perPrinterHint`)})]}),(0,G.jsxs)(zd,{className:`space-y-2`,children:[(0,G.jsxs)(`label`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:h===null,onChange:e=>g(e.target.checked?null:T?.map(e=>e.id)??[]),disabled:!r}),(0,G.jsx)(`span`,{className:`text-white`,children:e(`failureDetection.monitorAll`)})]}),h!==null&&T&&(0,G.jsx)(`div`,{className:`pl-5 space-y-1 border-l border-gray-700`,children:T.map(e=>(0,G.jsxs)(`label`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:h.includes(e.id),onChange:t=>k(e.id,t.target.checked),disabled:!r}),(0,G.jsx)(`span`,{className:`text-white`,children:e.name})]},e.id))})]})]})]}),(0,G.jsxs)(`div`,{className:`space-y-3 flex-1 lg:max-w-xl`,children:[(0,G.jsxs)(Ld,{id:`card-fd-status`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`failureDetection.statusTitle`)})}),(0,G.jsx)(zd,{children:C?(0,G.jsxs)(`div`,{className:`space-y-3 text-sm`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:e(`failureDetection.serviceRunning`)}),(0,G.jsx)(`span`,{className:C.is_running?`text-green-700 dark:text-green-400`:`text-red-700 dark:text-red-400`,children:C.is_running?e(`common.yes`):e(`common.no`)})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:e(`failureDetection.thresholds`)}),(0,G.jsxs)(`span`,{className:`text-white font-mono`,children:[C.thresholds.low.toFixed(2),` / `,C.thresholds.high.toFixed(2)]})]}),C.last_error&&(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-red-700 dark:text-red-400`,children:[(0,G.jsx)(td,{className:`w-4 h-4 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`break-words`,children:C.last_error})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-bambu-gray mb-1`,children:e(`failureDetection.activePrinters`)}),Object.keys(C.per_printer).length===0?(0,G.jsx)(`div`,{className:`text-bambu-gray italic text-xs`,children:e(`failureDetection.noActivePrints`)}):(0,G.jsx)(`div`,{className:`space-y-1`,children:Object.entries(C.per_printer).map(([e,t])=>{let n=T?.find(t=>String(t.id)===e),r=t.class===`failure`?`text-red-700 dark:text-red-400`:t.class===`warning`?`text-amber-700 dark:text-amber-400`:`text-green-700 dark:text-green-400`;return(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-white`,children:n?.name??`Printer ${e}`}),(0,G.jsxs)(`span`,{className:`font-mono ${r}`,children:[t.class,` (`,t.score.toFixed(3),`, `,t.frame_count,`f)`]})]},e)})})]})]}):(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),(0,G.jsx)(`span`,{children:e(`common.loading`)})]})})]}),(0,G.jsxs)(Ld,{id:`card-fd-history`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`failureDetection.historyTitle`)}),(0,G.jsx)(`button`,{onClick:()=>w(),className:`text-xs text-bambu-gray hover:text-white`,children:e(`common.refresh`)})]})}),(0,G.jsx)(zd,{children:!C||C.history.length===0?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray text-sm`,children:[(0,G.jsx)(Uc,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:e(`failureDetection.noHistory`)})]}):(0,G.jsx)(`div`,{className:`space-y-1 max-h-96 overflow-y-auto text-xs font-mono`,children:C.history.map((e,t)=>{let n=T?.find(t=>t.id===e.printer_id),r=e.class===`failure`?`text-red-700 dark:text-red-400`:e.class===`warning`?`text-amber-700 dark:text-amber-400`:`text-bambu-gray`;return(0,G.jsxs)(`div`,{className:`flex justify-between gap-2 py-1 border-b border-gray-800`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:new Date(e.timestamp).toLocaleTimeString()}),(0,G.jsx)(`span`,{className:`text-white truncate`,children:n?.name??`#${e.printer_id}`}),(0,G.jsxs)(`span`,{className:r,children:[e.class,` `,e.score.toFixed(3)]})]},t)})})})]})]})]})}var fGe={starttls:587,ssl:465,none:25},pGe={587:`starttls`,465:`ssl`,25:`none`};function mGe(){let{t:e}=U(),{showToast:t}=Gd(),n=co(),[r,i]=(0,y.useState)({smtp_host:``,smtp_port:587,smtp_username:``,smtp_password:``,smtp_security:`starttls`,smtp_auth_enabled:!0,smtp_from_email:``,smtp_from_name:`BamBuddy`}),[a,o]=(0,y.useState)(``),{data:s,isLoading:c}=K({queryKey:[`smtpSettings`],queryFn:()=>Z.getSMTPSettings()}),{authEnabled:l}=jd(),{data:u}=K({queryKey:[`advancedAuthStatus`],queryFn:()=>Z.getAdvancedAuthStatus()});(0,y.useEffect)(()=>{s&&i({...s,smtp_password:``})},[s]);let d=e=>{i({...r,smtp_security:e,smtp_port:fGe[e]})},f=e=>{let t=pGe[e];i({...r,smtp_port:e,...t?{smtp_security:t}:{}})},p=e=>{i({...r,smtp_auth_enabled:e,...e?{}:{smtp_username:``,smtp_password:``}})},m=q({mutationFn:e=>Z.saveSMTPSettings(e),onSuccess:()=>{n.invalidateQueries({queryKey:[`smtpSettings`]}),n.invalidateQueries({queryKey:[`advancedAuthStatus`]}),t(e(`settings.email.success.settingsSaved`),`success`)},onError:e=>{t(e.message,`error`)}}),h=q({mutationFn:e=>Z.testSMTP(e),onSuccess:e=>{t(e.message,e.success?`success`:`error`)},onError:e=>{t(e.message,`error`)}}),g=q({mutationFn:e=>e?Z.enableAdvancedAuth():Z.disableAdvancedAuth(),onSuccess:e=>{n.invalidateQueries({queryKey:[`advancedAuthStatus`]}),t(e.message,`success`)},onError:e=>{t(e.message,`error`)}}),_=()=>{if(!r.smtp_host||!r.smtp_from_email){t(e(`settings.email.errors.requiredFields`),`error`);return}if(r.smtp_auth_enabled&&!r.smtp_username){t(e(`settings.email.errors.usernameRequired`),`error`);return}m.mutate(r)},v=()=>{if(!a){t(e(`settings.email.errors.enterTestEmail`),`error`);return}h.mutate({test_recipient:a})},b=()=>{if(!l){t(e(`settings.email.errors.enableAuthFirst`),`error`);return}if(!u?.advanced_auth_enabled&&!u?.smtp_configured){t(e(`settings.email.errors.configureSmtpFirst`),`error`);return}g.mutate(!u?.advanced_auth_enabled)};if(c)return(0,G.jsx)(`div`,{className:`flex items-center justify-center p-12`,children:(0,G.jsx)(Y,{className:`w-8 h-8 animate-spin text-bambu-green`})});let x=u?.advanced_auth_enabled??!1,S=`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,C=`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white/40 placeholder-bambu-gray/40 cursor-not-allowed`;return(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(Ld,{id:`card-email-advanced-auth`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(il,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`settings.email.advancedAuth`)||`Advanced Authentication`})]}),(0,G.jsx)(Q,{onClick:b,disabled:g.isPending,variant:x?`danger`:`primary`,children:x?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(el,{className:`w-4 h-4`}),e(`settings.email.disable`)||`Disable`]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(tl,{className:`w-4 h-4`}),e(`settings.email.enable`)||`Enable`]})})]})}),(0,G.jsx)(zd,{children:(0,G.jsx)(`div`,{className:`space-y-3`,children:x?(0,G.jsx)(`div`,{className:`bg-green-50 dark:bg-green-500/10 border border-green-300 dark:border-green-500/30 rounded-lg p-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(xs,{className:`w-5 h-5 text-green-600 dark:text-green-400 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`settings.email.advancedAuthEnabled`)||`Advanced Authentication is enabled`}),(0,G.jsxs)(`ul`,{className:`text-sm text-green-700 dark:text-green-300 space-y-1 list-disc list-inside`,children:[(0,G.jsx)(`li`,{children:e(`settings.email.feature1`)||`Passwords are auto-generated and emailed to new users`}),(0,G.jsx)(`li`,{children:e(`settings.email.feature2`)||`Users can login with username or email`}),(0,G.jsx)(`li`,{children:e(`settings.email.feature3`)||`Forgot password feature is available`}),(0,G.jsx)(`li`,{children:e(`settings.email.feature4`)||`Admins can reset user passwords via email`})]})]})]})}):(0,G.jsx)(`div`,{className:`bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30 rounded-lg p-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(Iu,{className:`w-5 h-5 text-yellow-600 dark:text-yellow-400 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`settings.email.advancedAuthDisabled`)||`Advanced Authentication is disabled`}),(0,G.jsx)(`p`,{className:`text-sm text-yellow-700 dark:text-yellow-300`,children:e(`settings.email.advancedAuthDisabledDesc`)||`Enable advanced authentication to activate email-based features for user management.`})]})]})})})})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 lg:grid-cols-3 gap-4`,children:[(0,G.jsx)(`div`,{className:`lg:col-span-2`,children:(0,G.jsxs)(Ld,{id:`card-smtp-config`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`settings.email.smtpSettings`)||`SMTP Configuration`})}),(0,G.jsx)(zd,{children:(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:e(`settings.email.authentication`)||`Authentication`}),(0,G.jsxs)(`select`,{value:r.smtp_auth_enabled?`true`:`false`,onChange:e=>p(e.target.value===`true`),className:S,children:[(0,G.jsx)(`option`,{value:`true`,children:e(`settings.email.authOptions.enabled`)}),(0,G.jsx)(`option`,{value:`false`,children:e(`settings.email.authOptions.disabled`)})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-4 transition-opacity ${r.smtp_auth_enabled?``:`opacity-40 pointer-events-none`}`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:e(`settings.email.username`)||`Username`}),(0,G.jsx)(`input`,{type:`text`,value:r.smtp_username||``,onChange:e=>i({...r,smtp_username:e.target.value}),placeholder:`your.email@gmail.com`,disabled:!r.smtp_auth_enabled,className:r.smtp_auth_enabled?S:C})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:e(`settings.email.password`)||`Password`}),(0,G.jsx)(`input`,{type:`password`,value:r.smtp_password||``,onChange:e=>i({...r,smtp_password:e.target.value}),placeholder:s?`••••••••`:`App password`,disabled:!r.smtp_auth_enabled,className:r.smtp_auth_enabled?S:C})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:[e(`settings.email.smtpHost`)||`SMTP Server`,` *`]}),(0,G.jsx)(`input`,{type:`text`,value:r.smtp_host,onChange:e=>i({...r,smtp_host:e.target.value}),placeholder:`smtp.gmail.com`,className:S})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:e(`settings.email.smtpPort`)||`SMTP Port`}),(0,G.jsx)(`input`,{type:`number`,value:r.smtp_port,onChange:e=>f(parseInt(e.target.value)||587),placeholder:`587`,className:S})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:e(`settings.email.security`)||`Security`}),(0,G.jsxs)(`select`,{value:r.smtp_security,onChange:e=>d(e.target.value),className:S,children:[(0,G.jsx)(`option`,{value:`starttls`,children:e(`settings.email.securityOptions.starttls`)}),(0,G.jsx)(`option`,{value:`ssl`,children:e(`settings.email.securityOptions.ssl`)}),(0,G.jsx)(`option`,{value:`none`,children:e(`settings.email.securityOptions.none`)})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:[e(`settings.email.fromEmail`)||`From Email`,` *`]}),(0,G.jsx)(`input`,{type:`email`,value:r.smtp_from_email,onChange:e=>i({...r,smtp_from_email:e.target.value}),placeholder:`your@email.com`,className:S})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:e(`settings.email.fromName`)||`From Name`}),(0,G.jsx)(`input`,{type:`text`,value:r.smtp_from_name,onChange:e=>i({...r,smtp_from_name:e.target.value}),placeholder:`BamBuddy`,className:S})]})]}),(0,G.jsx)(`div`,{className:`flex gap-2`,children:(0,G.jsx)(Q,{onClick:_,disabled:m.isPending,className:`flex-1`,children:m.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),e(`settings.email.saving`)||`Saving...`]}):e(`settings.email.save`)||`Save Settings`})})]})})]})}),(0,G.jsx)(`div`,{children:(0,G.jsxs)(Ld,{id:`card-email-test`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`settings.email.testConnection`)||`Test SMTP Connection`})}),(0,G.jsx)(zd,{children:(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:e(`settings.email.testRecipient`)||`Test Recipient Email`}),(0,G.jsx)(`input`,{type:`email`,value:a,onChange:e=>o(e.target.value),placeholder:`test@example.com`,className:S})]}),(0,G.jsx)(Q,{onClick:v,disabled:h.isPending,variant:`secondary`,children:h.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),e(`settings.email.sending`)||`Sending...`]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ql,{className:`w-4 h-4`}),e(`settings.email.sendTest`)||`Send Test Email`]})})]})})]})})]})]})}var hGe={starttls:`389`,ldaps:`636`};function gGe(){let{t:e}=U(),{showToast:t}=Gd(),n=co(),{authEnabled:r}=jd(),[i,a]=(0,y.useState)({ldap_server_url:``,ldap_bind_dn:``,ldap_bind_password:``,ldap_search_base:``,ldap_user_filter:`(sAMAccountName={username})`,ldap_security:`starttls`,ldap_group_mapping:``,ldap_auto_provision:!1,ldap_default_group:``}),{data:o,isLoading:s}=K({queryKey:[`settings`],queryFn:()=>Z.getSettings()}),{data:c}=K({queryKey:[`ldapStatus`],queryFn:()=>Z.getLDAPStatus()}),{data:l=[]}=K({queryKey:[`groups`],queryFn:()=>Z.getGroups()});(0,y.useEffect)(()=>{o&&a({ldap_server_url:o.ldap_server_url||``,ldap_bind_dn:o.ldap_bind_dn||``,ldap_bind_password:``,ldap_search_base:o.ldap_search_base||``,ldap_user_filter:o.ldap_user_filter||`(sAMAccountName={username})`,ldap_security:o.ldap_security||`starttls`,ldap_group_mapping:o.ldap_group_mapping||``,ldap_auto_provision:o.ldap_auto_provision??!1,ldap_default_group:o.ldap_default_group||``})},[o]);let u=q({mutationFn:e=>Z.updateSettings(e),onSuccess:()=>{n.invalidateQueries({queryKey:[`settings`]}),n.invalidateQueries({queryKey:[`ldapStatus`]}),t(e(`settings.ldap.settingsSaved`)||`LDAP settings saved`,`success`)},onError:e=>{t(e.message,`error`)}}),d=q({mutationFn:e=>Z.updateSettings({ldap_enabled:e}),onSuccess:()=>{n.invalidateQueries({queryKey:[`settings`]}),n.invalidateQueries({queryKey:[`ldapStatus`]}),t(c?.ldap_enabled?e(`settings.ldap.disabled`)||`LDAP authentication disabled`:e(`settings.ldap.enabled`)||`LDAP authentication enabled`,`success`)},onError:e=>{t(e.message,`error`)}}),f=q({mutationFn:()=>Z.testLDAP(),onSuccess:e=>{t(e.message,e.success?`success`:`error`)},onError:e=>{t(e.message,`error`)}}),p=()=>{if(!i.ldap_server_url){t(e(`settings.ldap.errors.serverRequired`)||`LDAP server URL is required`,`error`);return}if(!i.ldap_search_base){t(e(`settings.ldap.errors.searchBaseRequired`)||`Search base DN is required`,`error`);return}let n={ldap_server_url:i.ldap_server_url,ldap_bind_dn:i.ldap_bind_dn,ldap_search_base:i.ldap_search_base,ldap_user_filter:i.ldap_user_filter,ldap_security:i.ldap_security,ldap_group_mapping:i.ldap_group_mapping,ldap_auto_provision:i.ldap_auto_provision,ldap_default_group:i.ldap_default_group};i.ldap_bind_password&&(n.ldap_bind_password=i.ldap_bind_password),u.mutate(n)},m=()=>{if(!r){t(e(`settings.ldap.errors.enableAuthFirst`)||`Enable authentication first`,`error`);return}if(!c?.ldap_enabled&&!c?.ldap_configured){t(e(`settings.ldap.errors.configureLdapFirst`)||`Save LDAP settings first`,`error`);return}d.mutate(!c?.ldap_enabled)};if(s)return(0,G.jsx)(`div`,{className:`flex items-center justify-center p-12`,children:(0,G.jsx)(Y,{className:`w-8 h-8 animate-spin text-bambu-green`})});let h=c?.ldap_enabled??!1,g=`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`;return(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(Ld,{id:`card-ldap-toggle`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(ou,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`settings.ldap.title`)||`LDAP Authentication`})]}),(0,G.jsx)(Q,{onClick:m,disabled:d.isPending,variant:h?`danger`:`primary`,children:h?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(el,{className:`w-4 h-4`}),e(`common.disable`)||`Disable`]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(tl,{className:`w-4 h-4`}),e(`common.enable`)||`Enable`]})})]})}),(0,G.jsx)(zd,{children:h?(0,G.jsx)(`div`,{className:`bg-green-50 dark:bg-green-500/10 border border-green-300 dark:border-green-500/30 rounded-lg p-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(xs,{className:`w-5 h-5 text-green-600 dark:text-green-400 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`settings.ldap.enabledDesc`)||`LDAP authentication is enabled`}),(0,G.jsxs)(`ul`,{className:`text-sm text-green-700 dark:text-green-300 space-y-1 list-disc list-inside`,children:[(0,G.jsx)(`li`,{children:e(`settings.ldap.feature1`)||`Users can login with LDAP credentials`}),(0,G.jsx)(`li`,{children:e(`settings.ldap.feature2`)||`Local admin account remains as fallback`}),(0,G.jsx)(`li`,{children:e(`settings.ldap.feature3`)||`LDAP groups are mapped to BamBuddy groups on login`})]})]})]})}):(0,G.jsx)(`div`,{className:`bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30 rounded-lg p-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(Iu,{className:`w-5 h-5 text-yellow-600 dark:text-yellow-400 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`settings.ldap.disabledDesc`)||`LDAP authentication is disabled`}),(0,G.jsx)(`p`,{className:`text-sm text-yellow-700 dark:text-yellow-300 mt-1`,children:e(`settings.ldap.disabledHint`)||`Configure and save LDAP settings below, then enable.`})]})]})})})]}),(0,G.jsxs)(Ld,{id:`card-ldap-server`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`settings.ldap.serverConfig`)||`LDAP Server Configuration`})}),(0,G.jsx)(zd,{children:(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-3 gap-3`,children:[(0,G.jsxs)(`div`,{className:`md:col-span-2`,children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:e(`settings.ldap.serverUrl`)||`Server URL`}),(0,G.jsx)(`input`,{type:`text`,className:g,placeholder:`ldaps://ldap.example.com:636`,value:i.ldap_server_url,onChange:e=>a({...i,ldap_server_url:e.target.value})}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`settings.ldap.serverUrlHint`)||`Use ldaps:// for SSL or ldap:// with StartTLS`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:e(`settings.ldap.security`)||`Security`}),(0,G.jsx)(`div`,{className:`flex gap-2`,children:[`starttls`,`ldaps`].map(e=>(0,G.jsx)(`button`,{onClick:()=>a({...i,ldap_security:e}),className:`flex-1 px-2 py-2 rounded-lg text-sm font-medium transition-colors ${i.ldap_security===e?`bg-bambu-green text-black`:`bg-bambu-dark-secondary text-bambu-gray hover:text-white border border-bambu-dark-tertiary`}`,children:e===`starttls`?`StartTLS`:`LDAPS`},e))}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`settings.ldap.securityHint`)||`Default port: ${hGe[i.ldap_security]}`})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:e(`settings.ldap.bindDn`)||`Bind DN (Service Account)`}),(0,G.jsx)(`input`,{type:`text`,className:g,placeholder:`cn=service-account,ou=service,dc=example,dc=com`,value:i.ldap_bind_dn,onChange:e=>a({...i,ldap_bind_dn:e.target.value})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:e(`settings.ldap.bindPassword`)||`Bind Password`}),(0,G.jsx)(`input`,{type:`password`,className:g,placeholder:o?.ldap_bind_dn?`••••••••`:``,value:i.ldap_bind_password,onChange:e=>a({...i,ldap_bind_password:e.target.value})})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:e(`settings.ldap.searchBase`)||`Search Base DN`}),(0,G.jsx)(`input`,{type:`text`,className:g,placeholder:`ou=users,dc=example,dc=com`,value:i.ldap_search_base,onChange:e=>a({...i,ldap_search_base:e.target.value})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:e(`settings.ldap.userFilter`)||`User Search Filter`}),(0,G.jsx)(`input`,{type:`text`,className:g,placeholder:`(sAMAccountName={username})`,value:i.ldap_user_filter,onChange:e=>a({...i,ldap_user_filter:e.target.value})})]})]}),(0,G.jsx)(qp,{summary:(0,G.jsx)(`span`,{className:`text-sm font-medium text-bambu-gray`,children:e(`settings.ldap.advanced`)||`Advanced`}),className:`border-t border-bambu-dark-tertiary pt-3`,summaryClassName:`py-1`,children:(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white`,children:e(`settings.ldap.autoProvision`)||`Auto-provision users`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:e(`settings.ldap.autoProvisionHint`)||`Automatically create a BamBuddy account on first LDAP login`})]}),(0,G.jsx)(`button`,{onClick:()=>a({...i,ldap_auto_provision:!i.ldap_auto_provision}),className:`relative inline-flex h-6 w-11 items-center rounded-full transition-colors flex-shrink-0 ${i.ldap_auto_provision?`bg-bambu-green`:`bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(`span`,{className:`inline-block h-4 w-4 transform rounded-full bg-white transition-transform ${i.ldap_auto_provision?`translate-x-6`:`translate-x-1`}`})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:e(`settings.ldap.defaultGroup`)||`Default group`}),(0,G.jsxs)(`select`,{className:g,value:i.ldap_default_group,onChange:e=>a({...i,ldap_default_group:e.target.value}),children:[(0,G.jsx)(`option`,{value:``,children:e(`settings.ldap.defaultGroupNone`)||`— None (reject login) —`}),l.map(e=>(0,G.jsx)(`option`,{value:e.name,children:e.name},e.id))]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`settings.ldap.defaultGroupHint`)||`Fallback group assigned when an LDAP user authenticates but is not listed in any mapped group. Leave empty to leave unmapped users without permissions.`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:e(`settings.ldap.groupMapping`)||`Group Mapping (JSON)`}),(0,G.jsx)(`textarea`,{className:`${g} font-mono text-sm`,rows:4,placeholder:`{
+`),confirmText:e(`queue.filamentShort.printAnyway`),variant:`warning`,onConfirm:()=>{be.mutate({id:ve.itemId,skipFilamentCheck:!0})},onCancel:()=>ye(null)}),v&&(0,G.jsx)(rf,{title:v.type===`cancel`?e(`queue.confirm.cancelTitle`):v.type===`stop`?e(`queue.confirm.stopTitle`):e(`queue.confirm.removeTitle`),message:v.type===`cancel`?e(`queue.confirm.cancelMessage`,{name:v.item.archive_name||v.item.library_file_name||e(`queue.confirm.thisPrint`)}):v.type===`stop`?e(`queue.confirm.stopMessage`,{name:v.item.archive_name||v.item.library_file_name||e(`queue.confirm.thisPrint`)}):e(`queue.confirm.removeMessage`,{name:v.item.archive_name||v.item.library_file_name||e(`queue.confirm.thisItem`)}),confirmText:v.type===`cancel`?e(`queue.confirm.cancelButton`):v.type===`stop`?e(`queue.confirm.stopButton`):e(`common.remove`),variant:`danger`,onConfirm:()=>{v.type===`cancel`?he.mutate(v.item.id):v.type===`stop`?_e.mutate(v.item.id):ge.mutate(v.item.id),b(null)},onCancel:()=>b(null)}),T&&(0,G.jsx)(rf,{title:e(`queue.resumeAfterFailure.confirmTitle`),message:e(`queue.resumeAfterFailure.confirmMessage`,{printer:T.printerName,count:T.skippedCount}),confirmText:e(`queue.resumeAfterFailure.button`),variant:`warning`,onConfirm:()=>Te.mutate(T.printerId),onCancel:()=>E(null)}),f&&(0,G.jsx)(rf,{title:e(`queue.confirm.clearHistoryTitle`),message:e(`queue.confirm.clearHistoryMessage`,{count:He.length}),confirmText:e(`queue.clearHistory`),variant:`danger`,onConfirm:()=>{Se.mutate(),p(!1)},onCancel:()=>p(!1)}),C&&(0,G.jsx)(WHe,{selectedCount:x.length,printers:pe?.map(e=>({id:e.id,name:e.name,nozzle_count:e.nozzle_count}))||[],onSave:e=>{Object.keys(e).length>0&&Ce.mutate({item_ids:x,...e})},onClose:()=>w(!1),isSaving:Ce.isPending,canControlPrinter:r(`printers:control`),hasGcodeSnippets:!!H?.gcode_snippets,t:e}),re&&(0,G.jsx)(JHe,{itemCount:x.length,isSaving:Ee.isPending,defaultName:(()=>{let t=je.find(e=>x.includes(e.id)),n=(t?.archive_name||t?.library_file_name||``).replace(/\.gcode\.3mf$/i,``).replace(/\.3mf$/i,``);return n?`${n}`:e(`queue.batch.defaultName`)})(),onSave:e=>Ee.mutate({name:e,item_ids:x}),onClose:()=>ie(!1),t:e}),ae!==null&&(0,G.jsx)(rf,{title:e(`queue.batch.ungroupConfirmTitle`),message:e(`queue.batch.ungroupConfirmMessage`),confirmText:e(`queue.batch.ungroup`),variant:`warning`,onConfirm:()=>De.mutate(ae),onCancel:()=>oe(null)})]})}function JHe({itemCount:e,defaultName:t,isSaving:n,onSave:r,onClose:i,t:a}){let[o,s]=(0,y.useState)(t);return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/60 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl p-6 w-full max-w-md`,children:[(0,G.jsxs)(`h3`,{className:`text-lg font-semibold text-white mb-2 flex items-center gap-2`,children:[(0,G.jsx)(Sl,{className:`w-5 h-5 text-cyan-700 dark:text-cyan-300`}),a(`queue.batch.groupAsBatch`)]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4`,children:a(`queue.batch.groupAsBatchDescription`,{count:e})}),(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:a(`queue.batch.nameLabel`)}),(0,G.jsx)(`input`,{type:`text`,autoFocus:!0,value:o,onChange:e=>s(e.target.value),placeholder:a(`queue.batch.namePlaceholder`),maxLength:120,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none mb-5`}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2`,children:[(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:i,disabled:n,children:a(`common.cancel`)}),(0,G.jsx)(Q,{variant:`primary`,size:`sm`,onClick:()=>{let e=o.trim();e&&r(e)},disabled:n||!o.trim(),children:a(n?`common.saving`:`queue.batch.create`)})]})]})})}function YHe({printDates:e,months:t=3}){let n=(0,y.useRef)(null),[r,i]=(0,y.useState)(0);(0,y.useEffect)(()=>{let e=n.current;if(!e)return;let t=new ResizeObserver(e=>{i(e[0]?.contentRect.width||0)});return t.observe(e),()=>t.disconnect()},[]);let{weeks:a,monthLabels:o,printCounts:s}=(0,y.useMemo)(()=>{let n={};e.forEach(e=>{let t=up(e);t&&(n[t]=(n[t]||0)+1)});let r=new Date,i=new Date(r);i.setMonth(i.getMonth()-t),i.setDate(i.getDate()-i.getDay());let a=[],o=[],s=[],c=-1,l=new Date(i),u=0;for(;l<=r;)l.getDay()===0&&s.length>0&&(a.push(s),s=[],u++),l.getMonth()!==c&&(o.push({month:l.toLocaleDateString(`en-US`,{month:`short`}),weekIndex:u}),c=l.getMonth()),s.push(new Date(l)),l.setDate(l.getDate()+1);return s.length>0&&a.push(s),{weeks:a,monthLabels:o,printCounts:n}},[e,t]),c=Math.max(1,...Object.values(s)),l=e=>{if(e===0)return`bg-bambu-dark`;let t=e/c;return t<=.25?`bg-bambu-green/30`:t<=.5?`bg-bambu-green/50`:t<=.75?`bg-bambu-green/75`:`bg-bambu-green`},u=[`Sun`,`Mon`,`Tue`,`Wed`,`Thu`,`Fri`,`Sat`],d=a.length,f=r-32-16,p=d>0?Math.floor((f-(d-1)*2)/d):12,m=Math.max(8,Math.min(20,p)),h=m<=10?10:12;return(0,G.jsx)(`div`,{ref:n,className:`w-full flex justify-center`,children:r>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`flex mb-1`,style:{marginLeft:36},children:o.map(({month:e,weekIndex:t},n)=>(0,G.jsx)(`div`,{className:`text-bambu-gray`,style:{fontSize:h,marginLeft:n===0?0:`${(t-(o[n-1]?.weekIndex||0))*(m+2)-24}px`},children:e},n))}),(0,G.jsxs)(`div`,{className:`flex`,style:{gap:2},children:[(0,G.jsx)(`div`,{className:`flex flex-col`,style:{gap:2,marginRight:4,width:32},children:u.map((e,t)=>(0,G.jsx)(`div`,{className:`text-bambu-gray flex items-center`,style:{width:32,height:m,fontSize:h,visibility:t%2==1?`visible`:`hidden`},children:e},e))}),a.map((e,t)=>(0,G.jsx)(`div`,{className:`flex flex-col`,style:{gap:2},children:[0,1,2,3,4,5,6].map(t=>{let n=e.find(e=>e.getDay()===t);if(!n)return(0,G.jsx)(`div`,{style:{width:m,height:m}},t);let r=up(n),i=s[r]||0,a=r===up(new Date);return(0,G.jsx)(`div`,{className:`rounded-sm ${l(i)} ${a?`ring-1 ring-white`:``}`,style:{width:m,height:m},title:`${n.toLocaleDateString()}: ${i} print${i===1?``:`s`}`},t)})},t))]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mt-3 text-bambu-gray`,style:{fontSize:h},children:[(0,G.jsx)(`span`,{children:`Less`}),(0,G.jsxs)(`div`,{className:`flex`,style:{gap:2},children:[(0,G.jsx)(`div`,{className:`rounded-sm bg-bambu-dark`,style:{width:m,height:m}}),(0,G.jsx)(`div`,{className:`rounded-sm bg-bambu-green/30`,style:{width:m,height:m}}),(0,G.jsx)(`div`,{className:`rounded-sm bg-bambu-green/50`,style:{width:m,height:m}}),(0,G.jsx)(`div`,{className:`rounded-sm bg-bambu-green/75`,style:{width:m,height:m}}),(0,G.jsx)(`div`,{className:`rounded-sm bg-bambu-green`,style:{width:m,height:m}})]}),(0,G.jsx)(`span`,{children:`More`})]})]})})}var g8=[`weight`,`prints`,`time`];function _8({value:e,onChange:t,exclude:n}){let{t:r}=U(),i={weight:r(`stats.filamentByWeight`),prints:r(`stats.filamentByPrints`),time:r(`stats.filamentByTime`)};return(0,G.jsx)(`div`,{className:`flex gap-0.5 bg-bambu-dark rounded-lg p-0.5`,children:(n?g8.filter(e=>!n.includes(e)):g8).map(n=>(0,G.jsx)(`button`,{onClick:()=>t(n),className:`px-2 py-0.5 text-xs rounded-md transition-colors ${e===n?`bg-bambu-green text-white`:`text-bambu-gray hover:text-white`}`,children:i[n]},n))})}function v8(e){if(e>=1e6){let t=e/1e6;return`${t%1==0?t.toFixed(0):t.toFixed(1)}t`}if(e>=1e3){let t=e/1e3;return`${t%1==0?t.toFixed(0):t.toFixed(1)}kg`}return`${Math.round(e)}g`}var y8=[`#00ae42`,`#3b82f6`,`#f59e0b`,`#ef4444`,`#8b5cf6`,`#ec4899`,`#14b8a6`,`#f97316`],XHe=[`Sun`,`Mon`,`Tue`,`Wed`,`Thu`,`Fri`,`Sat`],b8=[`12am`,`1am`,`2am`,`3am`,`4am`,`5am`,`6am`,`7am`,`8am`,`9am`,`10am`,`11am`,`12pm`,`1pm`,`2pm`,`3pm`,`4pm`,`5pm`,`6pm`,`7pm`,`8pm`,`9pm`,`10pm`,`11pm`];function ZHe({archives:e,currency:t=`$`,dateFrom:n,dateTo:r}){let{t:i}=U(),[a,o]=(0,y.useState)(`weight`),[s,c]=(0,y.useState)(`weight`),l=(0,y.useMemo)(()=>{let t=new Map;return e.forEach(e=>{let n=ep(e.completed_at||e.created_at)||new Date,r=`${n.getFullYear()}-${String(n.getMonth()+1).padStart(2,`0`)}-${String(n.getDate()).padStart(2,`0`)}`,i=t.get(r)||{date:r,filament:0,cost:0,energy:0,prints:0};i.filament+=e.filament_used_grams||0,i.cost+=e.cost||0,i.energy+=e.energy_kwh||0,i.prints+=e.quantity??1,t.set(r,i)}),Array.from(t.values()).sort((e,t)=>e.date.localeCompare(t.date)).map(e=>({...e,dateLabel:new Date(e.date).toLocaleDateString(`en-US`,{month:`short`,day:`numeric`})}))},[e]),u=(0,y.useMemo)(()=>{if(n&&r)return Math.max((new Date(r).getTime()-new Date(n).getTime())/864e5,0)+1;if(n)return Math.max((Date.now()-new Date(n).getTime())/864e5,0)+1;if(e.length<2)return 0;let t=e.map(e=>new Date(e.completed_at||e.created_at).getTime());return(Math.max(...t)-Math.min(...t))/864e5},[e,n,r]),d=(0,y.useMemo)(()=>{if(u>7)return[];let t=new Map,n=u>1;return e.forEach(e=>{let n=ep(e.completed_at||e.created_at)||new Date,r=n.getHours(),i=`${n.getFullYear()}-${String(n.getMonth()+1).padStart(2,`0`)}-${String(n.getDate()).padStart(2,`0`)}T${String(r).padStart(2,`0`)}`,a=t.get(i)||{date:i,filament:0,cost:0,energy:0,prints:0};a.filament+=e.filament_used_grams||0,a.cost+=e.cost||0,a.energy+=e.energy_kwh||0,a.prints+=e.quantity??1,t.set(i,a)}),Array.from(t.values()).sort((e,t)=>e.date.localeCompare(t.date)).map(e=>{let[t,r]=e.date.split(`T`),i=new Date(t),a=parseInt(r,10),o=n?`${XHe[i.getDay()]} ${b8[a]}`:b8[a];return{...e,dateLabel:o}})},[e,u]),f=(0,y.useMemo)(()=>{if(l.length<=60)return l;let e=new Map;return l.forEach(t=>{let n=new Date(t.date),r=new Date(n);r.setDate(n.getDate()-n.getDay());let i=`${r.getFullYear()}-${String(r.getMonth()+1).padStart(2,`0`)}-${String(r.getDate()).padStart(2,`0`)}`,a=e.get(i)||{week:i,filament:0,cost:0,energy:0,prints:0};a.filament+=t.filament,a.cost+=t.cost,a.energy+=t.energy,a.prints+=t.prints,e.set(i,a)}),Array.from(e.values()).sort((e,t)=>e.week.localeCompare(t.week)).map(e=>({date:e.week,dateLabel:`Week of ${new Date(e.week).toLocaleDateString(`en-US`,{month:`short`,day:`numeric`})}`,...e}))},[l]),p=(0,y.useMemo)(()=>{let t=new Map;return e.forEach(e=>{let n=(e.filament_type||`Unknown`).split(`, `);n.forEach(r=>{let i=(e.filament_used_grams||0)/n.length;t.set(r,(t.get(r)||0)+i)})}),Array.from(t.entries()).map(([e,t])=>({name:e,value:Math.round(t)})).sort((e,t)=>t.value-e.value)},[e]),m=(0,y.useMemo)(()=>{let t=new Map;return e.forEach(e=>{(e.filament_type||`Unknown`).split(`, `).forEach(e=>{t.set(e,(t.get(e)||0)+1)})}),Array.from(t.entries()).map(([e,t])=>({name:e,value:t})).sort((e,t)=>t.value-e.value)},[e]),h=(0,y.useMemo)(()=>{let t=new Map;return e.forEach(e=>{let n=(e.filament_type||`Unknown`).split(`, `),r=(e.actual_time_seconds||e.print_time_seconds||0)/n.length;n.forEach(e=>{t.set(e,(t.get(e)||0)+r)})}),Array.from(t.entries()).map(([e,t])=>({name:e,value:Math.round(t/3600*10)/10})).sort((e,t)=>t.value-e.value)},[e]),g=(0,y.useMemo)(()=>{let t=new Map;return e.forEach(e=>{e.status!==`completed`&&e.status!==`failed`||(e.filament_type||`Unknown`).split(`, `).forEach(n=>{let r=t.get(n)||{completed:0,failed:0};e.status===`completed`?r.completed++:r.failed++,t.set(n,r)})}),Array.from(t.entries()).filter(([,e])=>e.completed+e.failed>=2).map(([e,t])=>{let n=t.completed+t.failed;return{name:e,rate:Math.round(t.completed/n*100),total:n}}).sort((e,t)=>t.rate-e.rate)},[e]),_=(0,y.useMemo)(()=>{let t=new Map;return e.forEach(e=>{if(!e.filament_color)return;let n=e.filament_color.split(`,`).map(e=>e.trim()),r=(e.filament_used_grams||0)/n.length;n.forEach(e=>{let n=t.get(e)||{count:0,weight:0};n.count++,n.weight+=r,t.set(e,n)})}),Array.from(t.entries()).map(([e,t])=>({hex:e,value:s===`prints`?t.count:Math.round(t.weight)})).sort((e,t)=>t.value-e.value)},[e,s]),v=a===`weight`?p:a===`prints`?m:h,b=u<=7&&d.length>0?d:f,x=e.reduce((e,t)=>e+(t.filament_used_grams||0),0),S=e.reduce((e,t)=>e+(t.cost||0),0),C=e.reduce((e,t)=>e+(t.energy_kwh||0),0),w=e.reduce((e,t)=>e+(t.energy_cost||0),0),T=e.reduce((e,t)=>e+(t.quantity??1),0),E=new Set(e.map(e=>e.printer_id).filter(Boolean)).size;return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-3 gap-2 max-[640px]:grid-cols-1`,children:[(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray leading-none`,children:i(`stats.periodFilament`)}),(0,G.jsx)(`p`,{className:`text-2xl font-bold text-white leading-none`,children:v8(x)})]}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[E,` `,i(`nav.printers`).toLowerCase()]})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray leading-none`,children:i(`stats.periodCost`)}),(0,G.jsxs)(`p`,{className:`text-2xl font-bold text-white leading-none`,children:[t,S.toFixed(2)]})]}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[T,` `,i(`common.prints`)]})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray leading-none`,children:i(`stats.avgPerPrint`)}),(0,G.jsxs)(`p`,{className:`text-2xl font-bold text-white leading-none`,children:[T>0?(x/T).toFixed(0):0,`g`]})]}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[t,T>0?(S/T).toFixed(2):`0.00`,` avg`]})]})]}),b.length>0?(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray mb-4`,children:i(`stats.usageOverTime`)}),(0,G.jsx)(lA,{width:`100%`,height:250,children:(0,G.jsxs)(pU,{data:b,children:[(0,G.jsx)(`defs`,{children:(0,G.jsxs)(`linearGradient`,{id:`colorFilament`,x1:`0`,y1:`0`,x2:`0`,y2:`1`,children:[(0,G.jsx)(`stop`,{offset:`5%`,stopColor:`#00ae42`,stopOpacity:.3}),(0,G.jsx)(`stop`,{offset:`95%`,stopColor:`#00ae42`,stopOpacity:0})]})}),(0,G.jsx)(yV,{strokeDasharray:`3 3`,stroke:`#3d3d3d`}),(0,G.jsx)(CH,{dataKey:`dateLabel`,stroke:`#9ca3af`,tick:{fontSize:12},interval:`preserveStartEnd`}),(0,G.jsx)(OH,{stroke:`#9ca3af`,tick:{fontSize:12},tickFormatter:e=>`${e}g`}),(0,G.jsx)(tz,{contentStyle:{backgroundColor:`#2d2d2d`,border:`1px solid #3d3d3d`,borderRadius:`8px`},labelStyle:{color:`#fff`},formatter:e=>[`${Number(e??0).toFixed(0)}g`,`Filament`]}),(0,G.jsx)(tH,{type:`monotone`,dataKey:`filament`,stroke:`#00ae42`,strokeWidth:2,fillOpacity:1,fill:`url(#colorFilament)`})]})})]}):(0,G.jsx)(`div`,{className:`bg-bambu-dark rounded-lg p-8 text-center text-bambu-gray`,children:i(`stats.noPrintDataInRange`)}),C>0&&b.length>0&&(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-4`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray`,children:i(`stats.energyOverTime`)}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[C.toFixed(3),` kWh · `,t,w.toFixed(2)]})]}),(0,G.jsx)(lA,{width:`100%`,height:250,children:(0,G.jsxs)(pU,{data:b,children:[(0,G.jsx)(`defs`,{children:(0,G.jsxs)(`linearGradient`,{id:`colorEnergy`,x1:`0`,y1:`0`,x2:`0`,y2:`1`,children:[(0,G.jsx)(`stop`,{offset:`5%`,stopColor:`#f59e0b`,stopOpacity:.3}),(0,G.jsx)(`stop`,{offset:`95%`,stopColor:`#f59e0b`,stopOpacity:0})]})}),(0,G.jsx)(yV,{strokeDasharray:`3 3`,stroke:`#3d3d3d`}),(0,G.jsx)(CH,{dataKey:`dateLabel`,stroke:`#9ca3af`,tick:{fontSize:12},interval:`preserveStartEnd`}),(0,G.jsx)(OH,{stroke:`#9ca3af`,tick:{fontSize:12},tickFormatter:e=>`${e}kWh`}),(0,G.jsx)(tz,{contentStyle:{backgroundColor:`#2d2d2d`,border:`1px solid #3d3d3d`,borderRadius:`8px`},labelStyle:{color:`#fff`},formatter:e=>[`${Number(e??0).toFixed(3)} kWh`,i(`stats.energyUsed`)]}),(0,G.jsx)(tH,{type:`monotone`,dataKey:`energy`,stroke:`#f59e0b`,strokeWidth:2,fillOpacity:1,fill:`url(#colorEnergy)`})]})})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 lg:grid-cols-3 gap-4`,children:[(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-4`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray`,children:i(`stats.byMaterial`)}),(0,G.jsx)(_8,{value:a,onChange:o})]}),v.length>0?(0,G.jsxs)(`div`,{className:`flex items-center gap-4`,children:[(0,G.jsx)(lA,{width:160,height:160,children:(0,G.jsxs)(fU,{children:[(0,G.jsx)(PB,{data:v,cx:`50%`,cy:`50%`,innerRadius:40,outerRadius:70,paddingAngle:2,dataKey:`value`,children:v.map((e,t)=>(0,G.jsx)(nz,{fill:y8[t%y8.length]},`cell-${t}`))}),(0,G.jsx)(tz,{contentStyle:{backgroundColor:`#2d2d2d`,border:`1px solid #3d3d3d`,borderRadius:`8px`},formatter:e=>[a===`weight`?v8(Number(e??0)):a===`time`?`${Number(e??0)}h`:`${e??0}`,a===`weight`?`Usage`:a===`time`?`Time`:`Prints`]})]})}),(0,G.jsx)(`div`,{className:`flex-1 space-y-2 overflow-hidden`,children:v.map((e,t)=>{let n=v.reduce((e,t)=>e+t.value,0),r=n>0?(e.value/n*100).toFixed(0):0;return(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(`div`,{className:`w-3 h-3 rounded-sm flex-shrink-0`,style:{backgroundColor:y8[t%y8.length]}}),(0,G.jsx)(`span`,{className:`text-white truncate flex-1`,children:e.name}),(0,G.jsxs)(`span`,{className:`text-bambu-gray flex-shrink-0`,children:[a===`weight`?v8(e.value):a===`time`?`${e.value}h`:e.value,` · `,r,`%`]})]},e.name)})})]}):(0,G.jsx)(`div`,{className:`h-[160px] flex items-center justify-center text-bambu-gray`,children:i(`stats.noFilamentData`)})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray mb-4`,children:i(`stats.filamentSuccess`)}),g.length>0?(0,G.jsx)(`div`,{className:`space-y-1.5`,children:g.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(`span`,{className:`text-white truncate w-20 flex-shrink-0`,children:e.name}),(0,G.jsx)(`div`,{className:`flex-1 h-1.5 bg-bambu-dark-secondary rounded-full`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full transition-all ${e.rate>=90?`bg-status-ok`:e.rate>=70?`bg-status-warning`:`bg-status-error`}`,style:{width:`${e.rate}%`}})}),(0,G.jsxs)(`span`,{className:`font-medium flex-shrink-0 tabular-nums ${e.rate>=90?`text-status-ok`:e.rate>=70?`text-status-warning`:`text-status-error`}`,children:[e.rate,`%`]}),(0,G.jsxs)(`span`,{className:`text-bambu-gray flex-shrink-0 text-xs`,children:[`(`,e.total,`)`]})]},e.name))}):(0,G.jsx)(`div`,{className:`h-[160px] flex items-center justify-center text-bambu-gray`,children:i(`stats.noArchiveData`)})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-4`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray`,children:i(`stats.colorDistribution`)}),(0,G.jsx)(_8,{value:s,onChange:c,exclude:[`time`]})]}),_.length>0?(()=>{let e=_.reduce((e,t)=>e+t.value,0);return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`relative mx-auto`,style:{width:160,height:160},children:[(0,G.jsx)(lA,{width:`100%`,height:`100%`,children:(0,G.jsxs)(fU,{children:[(0,G.jsx)(PB,{data:_,cx:`50%`,cy:`50%`,innerRadius:45,outerRadius:70,paddingAngle:2,dataKey:`value`,children:_.map((e,t)=>(0,G.jsx)(nz,{fill:e.hex,stroke:`#1a1a1a`,strokeWidth:1},`color-${t}`))}),(0,G.jsx)(tz,{contentStyle:{backgroundColor:`#2d2d2d`,border:`1px solid #3d3d3d`,borderRadius:`8px`},formatter:e=>[s===`weight`?v8(Number(e??0)):`${e??0}`,i(s===`weight`?`stats.filamentByWeight`:`stats.filamentByPrints`)]})]})}),(0,G.jsxs)(`div`,{className:`absolute inset-0 flex flex-col items-center justify-center`,children:[(0,G.jsx)(`span`,{className:`text-lg font-bold text-white`,children:s===`weight`?v8(e):e}),(0,G.jsxs)(`span`,{className:`text-[10px] text-bambu-gray`,children:[_.length,` `,_.length===1?`color`:`colors`]})]})]}),(0,G.jsx)(`div`,{className:`grid grid-cols-2 gap-x-3 gap-y-1 mt-2`,children:_.slice(0,8).map(t=>{let n=e>0?(t.value/e*100).toFixed(0):0;return(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-xs min-w-0`,children:[(0,G.jsx)(`div`,{className:`w-2.5 h-2.5 rounded-full flex-shrink-0 border border-black/20`,style:{backgroundColor:t.hex}}),(0,G.jsxs)(`span`,{className:`text-bambu-gray truncate`,children:[n,`%`]})]},t.hex)})}),_.length>8&&(0,G.jsxs)(`p`,{className:`text-[10px] text-bambu-gray mt-1 text-center`,children:[`+`,_.length-8,` more`]})]})})():(0,G.jsx)(`div`,{className:`h-[160px] flex items-center justify-center text-bambu-gray`,children:i(`stats.noColorData`)})]})]})]})}function QHe({id:e,title:t,component:n,isHidden:r,size:i,columnSpan:a,onToggleVisibility:o,onToggleSize:s}){let{attributes:c,listeners:l,setNodeRef:u,transform:d,transition:f,isDragging:p}=J6({id:e}),m={transform:E3.Transform.toString(d),transition:f,opacity:p?.5:1};return r?null:(0,G.jsxs)(`div`,{ref:u,style:{...m,gridColumn:`span ${a}`},className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary overflow-hidden ${p?`ring-2 ring-bambu-green shadow-lg`:``}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-4 py-3 border-b border-bambu-dark-tertiary bg-bambu-dark/30`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`button`,{...c,...l,className:`cursor-grab active:cursor-grabbing p-1 hover:bg-bambu-dark-tertiary rounded transition-colors`,title:`Drag to reorder`,children:(0,G.jsx)(Ac,{className:`w-6 h-6 md:w-4 md:h-4 text-bambu-gray`})}),(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white`,children:t})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`button`,{onClick:s,className:`p-1 hover:bg-bambu-dark-tertiary rounded transition-colors`,title:`Size: ${i===1?`1/4`:i===2?`1/2`:`Full`} - Click to cycle`,children:i===4?(0,G.jsx)(dl,{className:`w-4 h-4 text-bambu-gray hover:text-white`}):(0,G.jsx)(sl,{className:`w-4 h-4 text-bambu-gray hover:text-white`})}),(0,G.jsx)(`button`,{onClick:o,className:`p-1 hover:bg-bambu-dark-tertiary rounded transition-colors`,title:`Hide widget`,children:(0,G.jsx)(rc,{className:`w-4 h-4 text-bambu-gray hover:text-white`})})]})]}),(0,G.jsx)(`div`,{className:`p-4`,children:typeof n==`function`?n(i):n})]})}function $He({widgets:e,storageKey:t,columns:n=4,stackBelow:r,hideControls:i=!1,onResetLayout:a,renderControls:o}){let s=()=>{let t={};return e.forEach(e=>{t[e.id]=e.defaultSize||4}),t},[c,l]=(0,y.useState)(()=>{let n=localStorage.getItem(t);if(n)try{let e=JSON.parse(n);if(!e.sizes)e.sizes=s();else{let t=s();for(let n in t)n in e.sizes||(e.sizes[n]=t[n])}return e}catch{}return{order:e.map(e=>e.id),hidden:e.filter(e=>e.defaultVisible===!1).map(e=>e.id),sizes:s()}}),[u,d]=(0,y.useState)(!1),[f,p]=(0,y.useState)(!1);(0,y.useEffect)(()=>{if(!r)return;let e=window.matchMedia(`(max-width: ${r}px)`),t=e=>{p(e.matches)};t(e);let n=e=>t(e);return e.addEventListener?e.addEventListener(`change`,n):e.addListener(n),()=>{e.removeEventListener?e.removeEventListener(`change`,n):e.removeListener(n)}},[r]);let m=r&&f?1:n;(0,y.useEffect)(()=>{let e=()=>d(e=>!e);return window.addEventListener(`toggle-hidden-panel`,e),()=>window.removeEventListener(`toggle-hidden-panel`,e)},[]),(0,y.useEffect)(()=>{localStorage.setItem(t,JSON.stringify(c))},[c,t]),(0,y.useEffect)(()=>{let t=e.map(e=>e.id).filter(e=>!c.order.includes(e));t.length>0&&l(e=>({...e,order:[...e.order,...t]}))},[e,c.order]);let h=M3(j3(f6,{activationConstraint:{distance:8}}),j3(c6,{coordinateGetter:X6})),g=e=>{let{active:t,over:n}=e;n&&t.id!==n.id&&l(e=>{let r=e.order.indexOf(t.id),i=e.order.indexOf(n.id);return{...e,order:B6(e.order,r,i)}})},_=e=>{l(t=>({...t,hidden:t.hidden.includes(e)?t.hidden.filter(t=>t!==e):[...t.hidden,e]}))},v=e=>{l(t=>{let n=t.sizes[e]||4,r=n===1?2:n===2?4:1;return{...t,sizes:{...t.sizes,[e]:r}}})},b=()=>{l({order:e.map(e=>e.id),hidden:e.filter(e=>e.defaultVisible===!1).map(e=>e.id),sizes:s()}),a?.()},x=c.order.map(t=>e.find(e=>e.id===t)).filter(Boolean),S=x.filter(e=>!c.hidden.includes(e.id)),C=x.filter(e=>c.hidden.includes(e.id)),w=o?.({hiddenCount:C.length,showHiddenPanel:u,setShowHiddenPanel:d,resetLayout:b});return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[w,!i&&!o&&(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-2`,children:[(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:b,children:[(0,G.jsx)(Ul,{className:`w-4 h-4`}),`Reset Layout`]}),C.length>0&&(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>d(!u),children:[(0,G.jsx)(ic,{className:`w-4 h-4`}),C.length,` Hidden`]})]}),u&&C.length>0&&(0,G.jsxs)(`div`,{className:`p-4 bg-bambu-dark rounded-xl border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-3`,children:`Hidden widgets (click to show):`}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-2`,children:C.map(e=>(0,G.jsxs)(`button`,{onClick:()=>_(e.id),className:`px-3 py-1.5 bg-bambu-dark-tertiary hover:bg-bambu-green/20 rounded-lg text-sm text-white transition-colors flex items-center gap-2`,children:[(0,G.jsx)(ic,{className:`w-3 h-3`}),e.title]},e.id))})]}),(0,G.jsx)(I6,{sensors:h,collisionDetection:z3,onDragEnd:g,children:(0,G.jsx)(K6,{items:S.map(e=>e.id),strategy:H6,children:(0,G.jsx)(`div`,{className:`grid gap-6`,style:{gridTemplateColumns:`repeat(${m}, minmax(0, 1fr))`},children:S.map(e=>{let t=c.sizes[e.id]||2,n=Math.min(t,m);return(0,G.jsx)(QHe,{id:e.id,title:e.title,component:e.component,isHidden:c.hidden.includes(e.id),size:t,columnSpan:n,onToggleVisibility:()=>_(e.id),onToggleSize:()=>v(e.id)},e.id)})})})}),S.length===0&&(0,G.jsxs)(`div`,{className:`text-center py-12 text-bambu-gray`,children:[(0,G.jsx)(`p`,{children:`All widgets are hidden.`}),(0,G.jsx)(Q,{className:`mt-4`,onClick:b,children:`Reset Layout`})]})]})}function eUe(e){let t=new Date,n=t.getUTCFullYear(),r=t.getUTCMonth(),i=t.getUTCDate(),a=e=>e.toISOString().split(`T`)[0],o=a(t);switch(e){case`today`:return{dateFrom:o,dateTo:o};case`this-week`:{let e=t.getUTCDay();return{dateFrom:a(new Date(Date.UTC(n,r,i-(e===0?6:e-1)))),dateTo:o}}case`this-month`:return{dateFrom:a(new Date(Date.UTC(n,r,1))),dateTo:o};case`last-7`:return{dateFrom:a(new Date(Date.UTC(n,r,i-6))),dateTo:o};case`last-30`:return{dateFrom:a(new Date(Date.UTC(n,r,i-29))),dateTo:o};case`last-90`:return{dateFrom:a(new Date(Date.UTC(n,r,i-89))),dateTo:o};case`this-year`:return{dateFrom:a(new Date(Date.UTC(n,0,1))),dateTo:o};case`all-time`:return{dateFrom:void 0,dateTo:void 0};case`custom`:return{}}}var tUe=[`today`,`this-week`,`this-month`,`last-7`,`last-30`,`last-90`,`this-year`,`all-time`],nUe=[`Mon`,`Tue`,`Wed`,`Thu`,`Fri`,`Sat`,`Sun`],x8=[`12am`,`1am`,`2am`,`3am`,`4am`,`5am`,`6am`,`7am`,`8am`,`9am`,`10am`,`11am`,`12pm`,`1pm`,`2pm`,`3pm`,`4pm`,`5pm`,`6pm`,`7pm`,`8pm`,`9pm`,`10pm`,`11pm`],S8=[{key:`<30m`,max:1800},{key:`30m-1h`,max:3600},{key:`1-2h`,max:7200},{key:`2-4h`,max:14400},{key:`4-8h`,max:28800},{key:`8-12h`,max:43200},{key:`12-24h`,max:86400},{key:`24h+`,max:1/0}],C8={backgroundColor:`#2d2d2d`,border:`1px solid #3d3d3d`,borderRadius:`8px`};function rUe({stats:e,currency:t}){let{t:n}=U(),r=e?.energy_data_warming_up===!0,i=r?n(`stats.energyWarmingUpTooltip`):void 0;return(0,G.jsx)(`div`,{className:`grid grid-cols-2 sm:grid-cols-3 gap-4`,children:[{icon:Sl,color:`text-bambu-green`,label:n(`stats.totalPrints`),value:`${e?.total_prints||0}`},{icon:js,color:`text-blue-600 dark:text-blue-400`,label:n(`stats.printTime`),value:`${e?.total_print_time_hours?.toFixed(1)??`0`}h`},{icon:Sl,color:`text-orange-600 dark:text-orange-400`,label:n(`stats.filamentUsed`),value:v8(e?.total_filament_grams||0)},{icon:Ks,color:`text-green-600 dark:text-green-400`,label:n(`stats.filamentCost`),value:`${t} ${e?.total_cost?.toFixed(2)??`0.00`}`},{icon:rd,color:`text-yellow-600 dark:text-yellow-400`,label:n(`stats.energyUsed`),value:`${e?.total_energy_kwh?.toFixed(3)??`0.000`} kWh`,warning:r,tooltip:i},{icon:Ks,color:`text-yellow-500`,label:n(`stats.energyCost`),value:`${t} ${e?.total_energy_cost?.toFixed(2)??`0.00`}`,warning:r,tooltip:i}].map(e=>(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,title:e.tooltip,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg bg-bambu-dark ${e.color}`,children:(0,G.jsx)(e.icon,{className:`w-5 h-5`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray flex items-center gap-1`,children:[e.label,e.warning&&(0,G.jsx)(Iu,{className:`w-3 h-3 text-yellow-600 dark:text-yellow-400`,"aria-label":e.tooltip})]}),(0,G.jsx)(`p`,{className:`text-xl font-bold text-white`,children:e.value})]})]},e.label))})}function iUe({stats:e,printerMap:t,size:n=1}){let{t:r}=U(),i=(e?.successful_prints||0)+(e?.failed_prints||0),a=i?Math.round((e?.successful_prints||0)/i*100):0,o=n===1?112:n===2?128:144,s=o/2-8,c=s*2*Math.PI;return(0,G.jsxs)(`div`,{className:`flex items-center gap-6`,children:[(0,G.jsxs)(`div`,{className:`relative flex-shrink-0`,style:{width:o,height:o},children:[(0,G.jsxs)(`svg`,{className:`w-full h-full -rotate-90`,children:[(0,G.jsx)(`circle`,{cx:o/2,cy:o/2,r:s,fill:`none`,stroke:`#3d3d3d`,strokeWidth:`10`}),(0,G.jsx)(`circle`,{cx:o/2,cy:o/2,r:s,fill:`none`,stroke:`#00ae42`,strokeWidth:`10`,strokeLinecap:`round`,strokeDasharray:`${a/100*c} ${c}`})]}),(0,G.jsx)(`div`,{className:`absolute inset-0 flex items-center justify-center`,children:(0,G.jsxs)(`span`,{className:`font-bold text-white ${n>=2?`text-2xl`:`text-xl`}`,children:[a,`%`]})})]}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(xs,{className:`w-4 h-4 text-status-ok flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:r(`stats.successful`)}),(0,G.jsx)(`span`,{className:`text-sm text-white font-medium`,children:e?.successful_prints||0})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Ds,{className:`w-4 h-4 text-status-error flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:r(`stats.failed`)}),(0,G.jsx)(`span`,{className:`text-sm text-white font-medium`,children:e?.failed_prints||0})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Uo,{className:`w-4 h-4 text-status-warning flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:r(`stats.cancelled`)}),(0,G.jsx)(`span`,{className:`text-sm text-white font-medium`,children:e?.cancelled_prints||0})]})]}),n>=2&&e?.prints_by_printer&&Object.keys(e.prints_by_printer).length>0&&(0,G.jsxs)(`div`,{className:`mt-4 pt-4 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray font-medium mb-2`,children:r(`stats.printsByPrinter`)}),(0,G.jsx)(`div`,{className:`grid gap-x-6 gap-y-1 ${n===4?`grid-cols-3`:`grid-cols-2`}`,style:{width:`fit-content`},children:Object.entries(e.prints_by_printer).map(([e,n])=>(0,G.jsxs)(`div`,{className:`flex items-center gap-3 text-sm`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray truncate max-w-[120px]`,children:t.get(e)||`${r(`common.printer`)} ${e}`}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:n})]},e))})]})]})]})}function aUe({stats:e,printerMap:t,size:n=1}){let{t:r}=U(),i=e?.average_time_accuracy;if(i==null)return(0,G.jsx)(`div`,{className:`flex items-center justify-center h-full`,children:(0,G.jsx)(`p`,{className:`text-bambu-gray text-center py-4`,children:r(`stats.noTimeAccuracyData`)})});let a=(Math.min(150,Math.max(50,i))-50)/100*100,o=(e=>e>=95&&e<=105?`#00ae42`:e>105?`#3b82f6`:`#f97316`)(i),s=i-100,c=n===1?112:n===2?128:144,l=c/2-8,u=l*2*Math.PI,d=n===1?3:n===2?6:999,f=e?.time_accuracy_by_printer?Object.entries(e.time_accuracy_by_printer).slice(0,d):[];return(0,G.jsxs)(`div`,{className:`flex items-center gap-6`,children:[(0,G.jsxs)(`div`,{className:`relative flex-shrink-0`,style:{width:c,height:c},children:[(0,G.jsxs)(`svg`,{className:`w-full h-full -rotate-90`,children:[(0,G.jsx)(`circle`,{cx:c/2,cy:c/2,r:l,fill:`none`,stroke:`#3d3d3d`,strokeWidth:`10`}),(0,G.jsx)(`circle`,{cx:c/2,cy:c/2,r:l,fill:`none`,stroke:o,strokeWidth:`10`,strokeLinecap:`round`,strokeDasharray:`${a/100*u} ${u}`})]}),(0,G.jsxs)(`div`,{className:`absolute inset-0 flex flex-col items-center justify-center`,children:[(0,G.jsxs)(`span`,{className:`font-bold text-white ${n>=2?`text-2xl`:`text-xl`}`,children:[i.toFixed(0),`%`]}),(0,G.jsxs)(`span`,{className:`text-xs ${s>=0?`text-blue-700 dark:text-blue-400`:`text-orange-700 dark:text-orange-400`}`,children:[s>=0?`+`:``,s.toFixed(0),`%`]})]})]}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-xs text-bambu-gray`,children:[(0,G.jsx)(Eu,{className:`w-3 h-3 flex-shrink-0`}),(0,G.jsx)(`span`,{children:r(`stats.perfectEstimate`)})]}),f.length>0&&(0,G.jsx)(`div`,{className:`mt-2 ${n===4?`grid grid-cols-3 gap-x-6 gap-y-1`:n===2?`grid grid-cols-2 gap-x-6 gap-y-1`:`space-y-1`}`,style:{width:`fit-content`},children:f.map(([e,n])=>(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-xs`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray truncate max-w-[100px]`,children:t.get(e)||`${r(`common.printer`)} ${e}`}),(0,G.jsxs)(`span`,{className:`font-medium ${n>=95&&n<=105?`text-status-ok`:n>105?`text-blue-700 dark:text-blue-400`:`text-status-warning`}`,children:[n.toFixed(0),`%`]})]},e))})]})]})}function oUe({printDates:e,dateFrom:t,dateTo:n}){let{days:r,hourlyCounts:i,maxCount:a}=(0,y.useMemo)(()=>{let r=new Date(t+`T00:00:00`),i=new Date(n+`T00:00:00`),a=[],o=e=>`${e.getFullYear()}-${String(e.getMonth()+1).padStart(2,`0`)}-${String(e.getDate()).padStart(2,`0`)}`,s=new Date(r);for(;s<=i;)a.push({key:o(s),label:s.toLocaleDateString(void 0,{weekday:`short`,month:`short`,day:`numeric`})}),s.setDate(s.getDate()+1);let c={},l=0;return e.forEach(e=>{let t=ep(e);if(!t)return;let n=`${`${t.getFullYear()}-${String(t.getMonth()+1).padStart(2,`0`)}-${String(t.getDate()).padStart(2,`0`)}`}-${t.getHours()}`;c[n]=(c[n]||0)+1,c[n]>l&&(l=c[n])}),{days:a,hourlyCounts:c,maxCount:Math.max(1,l)}},[e,t,n]),o=e=>{if(e===0)return`bg-bambu-dark`;let t=e/a;return t<=.25?`bg-bambu-green/30`:t<=.5?`bg-bambu-green/50`:t<=.75?`bg-bambu-green/75`:`bg-bambu-green`};return(0,G.jsxs)(`div`,{className:`w-full overflow-x-auto`,children:[(0,G.jsxs)(`div`,{className:`inline-flex flex-col`,style:{gap:2},children:[(0,G.jsx)(`div`,{className:`flex`,style:{gap:2,marginLeft:84},children:x8.map((e,t)=>(0,G.jsx)(`div`,{className:`text-bambu-gray text-[10px] text-center`,style:{width:20,visibility:t%2==0?`visible`:`hidden`},children:e},t))}),r.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center`,style:{gap:2},children:[(0,G.jsx)(`div`,{className:`text-bambu-gray text-[10px] flex-shrink-0 truncate`,style:{width:80},children:e.label}),Array.from({length:24},(t,n)=>{let r=i[`${e.key}-${n}`]||0;return(0,G.jsx)(`div`,{className:`rounded-sm ${o(r)}`,style:{width:20,height:20},title:`${e.label} ${x8[n]}: ${r} print${r===1?``:`s`}`},n)})]},e.key))]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mt-3 text-bambu-gray text-xs`,children:[(0,G.jsx)(`span`,{children:`Less`}),(0,G.jsxs)(`div`,{className:`flex`,style:{gap:2},children:[(0,G.jsx)(`div`,{className:`rounded-sm bg-bambu-dark`,style:{width:20,height:20}}),(0,G.jsx)(`div`,{className:`rounded-sm bg-bambu-green/30`,style:{width:20,height:20}}),(0,G.jsx)(`div`,{className:`rounded-sm bg-bambu-green/50`,style:{width:20,height:20}}),(0,G.jsx)(`div`,{className:`rounded-sm bg-bambu-green/75`,style:{width:20,height:20}}),(0,G.jsx)(`div`,{className:`rounded-sm bg-bambu-green`,style:{width:20,height:20}})]}),(0,G.jsx)(`span`,{children:`More`})]})]})}function sUe({printDates:e,size:t=2,dateFrom:n,dateTo:r}){let i=(0,y.useMemo)(()=>n&&r?Math.max((new Date(r).getTime()-new Date(n).getTime())/864e5,0)+1:n?Math.max((Date.now()-new Date(n).getTime())/864e5,0)+1:1/0,[n,r]);return i<=7&&n&&r?(0,G.jsx)(oUe,{printDates:e,dateFrom:n,dateTo:r}):(0,G.jsx)(YHe,{printDates:e,months:i===1/0?t===1?3:t===2?6:12:Math.max(1,Math.ceil(i/30))})}function cUe({stats:e,archives:t,printerMap:n}){let{t:r}=U(),[i,a]=(0,y.useState)(`weight`),[o,s]=(0,y.useState)(`weight`),c=(0,y.useMemo)(()=>{let a=new Map;return e?.prints_by_printer&&Object.entries(e.prints_by_printer).forEach(([e,t])=>{let n=a.get(e)||{prints:0,weight:0,time:0};n.prints=t,a.set(e,n)}),t.forEach(t=>{if(!t.printer_id)return;let n=String(t.printer_id),r=a.get(n)||{prints:0,weight:0,time:0};r.weight+=t.filament_used_grams||0,r.time+=t.actual_time_seconds||t.print_time_seconds||0,e?.prints_by_printer||r.prints++,a.set(n,r)}),Array.from(a.entries()).map(([e,t])=>({name:n.get(e)||`${r(`common.printer`)} ${e}`,value:i===`prints`?t.prints:i===`weight`?Math.round(t.weight):Math.round(t.time/3600*10)/10})).sort((e,t)=>t.value-e.value)},[e,t,n,i,r]),l=(0,y.useMemo)(()=>{let e=Array.from({length:24},(e,t)=>({hour:t,label:x8[t],total:0,failures:0}));return t.forEach(t=>{if(!t.started_at)return;let n=ep(t.started_at);if(!n)return;let r=n.getHours();e[r].total++,t.status===`failed`&&e[r].failures++}),e},[t]),u=(0,y.useMemo)(()=>{let e=S8.map(e=>({name:e.key,count:0}));return t.forEach(t=>{let n=t.actual_time_seconds||t.print_time_seconds;if(!(!n||n<=0)){for(let t=0;t<S8.length;t++)if(n<=S8[t].max){e[t].count++;break}}}),e},[t]),d=(0,y.useMemo)(()=>{let e=[0,0,0,0,0,0,0],n=new Set;t.forEach(t=>{let r=ep(t.created_at)||new Date(t.created_at),i=r.getDay()-1;i<0&&(i=6),o===`prints`?e[i]++:o===`weight`?e[i]+=t.filament_used_grams||0:e[i]+=(t.actual_time_seconds||t.print_time_seconds||0)/3600;let a=new Date(r);a.setDate(r.getDate()-(r.getDay()+6)%7),n.add(`${a.getFullYear()}-${String(a.getMonth()+1).padStart(2,`0`)}-${String(a.getDate()).padStart(2,`0`)}`)});let r=Math.max(n.size,1);return nUe.map((t,n)=>({name:t,avg:Math.round(e[n]/r*10)/10}))},[t,o]),f=e=>({unit:e===`weight`?`g`:e===`time`?`h`:``,color:e===`weight`?`#00ae42`:e===`time`?`#3b82f6`:`#f59e0b`}),p=f(i),m=r(i===`weight`?`stats.filamentByWeight`:i===`time`?`stats.hours`:`common.prints`),h=f(o),g=r(o===`weight`?`stats.avgWeight`:o===`time`?`stats.avgTime`:`stats.avgPrints`);return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray`,children:r(`stats.printsByPrinter`)}),(0,G.jsx)(_8,{value:i,onChange:a})]}),c.length>0?(0,G.jsx)(lA,{width:`100%`,height:Math.max(140,c.length*40),children:(0,G.jsxs)(sU,{data:c,layout:`vertical`,margin:{left:10},children:[(0,G.jsx)(yV,{strokeDasharray:`3 3`,stroke:`#3d3d3d`}),(0,G.jsx)(CH,{type:`number`,stroke:`#9ca3af`,tick:{fontSize:11},unit:p.unit}),(0,G.jsx)(OH,{type:`category`,dataKey:`name`,stroke:`#9ca3af`,tick:{fontSize:11},width:100}),(0,G.jsx)(tz,{contentStyle:C8,formatter:e=>[i===`weight`?v8(Number(e??0)):`${e??0}${p.unit}`,m]}),(0,G.jsx)(hH,{dataKey:`value`,fill:p.color,radius:[0,4,4,0]})]})}):(0,G.jsx)(`p`,{className:`text-bambu-gray text-center py-4`,children:r(`stats.noPrinterData`)})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 lg:grid-cols-3 gap-4`,children:[(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray mb-3`,children:r(`stats.printDuration`)}),t.length>0?(0,G.jsx)(lA,{width:`100%`,height:160,children:(0,G.jsxs)(sU,{data:u,children:[(0,G.jsx)(yV,{strokeDasharray:`3 3`,stroke:`#3d3d3d`}),(0,G.jsx)(CH,{dataKey:`name`,stroke:`#9ca3af`,tick:{fontSize:11}}),(0,G.jsx)(OH,{stroke:`#9ca3af`,tick:{fontSize:11},allowDecimals:!1}),(0,G.jsx)(tz,{contentStyle:C8}),(0,G.jsx)(hH,{dataKey:`count`,name:r(`common.prints`),fill:`#00ae42`,radius:[4,4,0,0]})]})}):(0,G.jsx)(`p`,{className:`text-bambu-gray text-center py-4`,children:r(`stats.noArchiveData`)})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray`,children:r(`stats.printHabits`)}),(0,G.jsx)(_8,{value:o,onChange:s})]}),t.length>0?(0,G.jsx)(lA,{width:`100%`,height:160,children:(0,G.jsxs)(sU,{data:d,children:[(0,G.jsx)(yV,{strokeDasharray:`3 3`,stroke:`#3d3d3d`}),(0,G.jsx)(CH,{dataKey:`name`,stroke:`#9ca3af`,tick:{fontSize:11}}),(0,G.jsx)(OH,{stroke:`#9ca3af`,tick:{fontSize:11},unit:h.unit}),(0,G.jsx)(tz,{contentStyle:C8,formatter:e=>[`${e??0}${h.unit}`,g]}),(0,G.jsx)(hH,{dataKey:`avg`,fill:h.color,radius:[4,4,0,0]})]})}):(0,G.jsx)(`p`,{className:`text-bambu-gray text-center py-4`,children:r(`stats.noArchiveData`)})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-bambu-gray mb-3`,children:r(`stats.printTimeOfDay`)}),t.length>0?(0,G.jsx)(lA,{width:`100%`,height:160,children:(0,G.jsxs)(sU,{data:l,children:[(0,G.jsx)(yV,{strokeDasharray:`3 3`,stroke:`#3d3d3d`}),(0,G.jsx)(CH,{dataKey:`label`,stroke:`#9ca3af`,tick:{fontSize:10},interval:5}),(0,G.jsx)(OH,{stroke:`#9ca3af`,tick:{fontSize:11},allowDecimals:!1}),(0,G.jsx)(tz,{contentStyle:C8}),(0,G.jsx)(hH,{dataKey:`total`,name:r(`stats.totalPrints`),fill:`#00ae42`,radius:[2,2,0,0]}),(0,G.jsx)(hH,{dataKey:`failures`,name:r(`stats.failed`),fill:`#ef4444`,radius:[2,2,0,0]})]})}):(0,G.jsx)(`p`,{className:`text-bambu-gray text-center py-4`,children:r(`stats.noArchiveData`)})]})]})]})}function lUe({archives:e,currency:t,dateFrom:n,dateTo:r}){let{t:i}=U();return!e||e.length===0?(0,G.jsx)(`p`,{className:`text-bambu-gray text-center py-4`,children:i(`stats.noPrintData`)}):(0,G.jsx)(ZHe,{archives:e,currency:t,dateFrom:n,dateTo:r})}function uUe({size:e=1,dateFrom:t,dateTo:n,createdById:r}){let{t:i}=U(),a=!!(t||n),{data:o,isLoading:s}=K({queryKey:[`failureAnalysis`,t,n,r??`all`],queryFn:()=>Z.getFailureAnalysis({...a?{dateFrom:t,dateTo:n}:{days:30},createdById:r})});if(s)return(0,G.jsx)(`div`,{className:`flex justify-center py-4`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})});if(!o||o.total_prints===0)return(0,G.jsx)(`p`,{className:`text-bambu-gray text-center py-4`,children:i(a?`stats.noPrintDataInRange`:`stats.noPrintDataLast30Days`)});let c=e===1?5:e===2?8:999,l=Object.entries(o.failures_by_reason).sort(([,e],[,t])=>t-e),u=l.slice(0,c),d=l.length>c;return(0,G.jsxs)(`div`,{className:`${e>=2?`flex gap-8`:`space-y-4`}`,children:[(0,G.jsxs)(`div`,{className:e>=2?`flex-shrink-0`:``,children:[(0,G.jsx)(`div`,{className:`flex items-center gap-4`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Iu,{className:`w-5 h-5 ${o.failure_rate>20?`text-status-error`:o.failure_rate>10?`text-status-warning`:`text-status-ok`}`}),(0,G.jsxs)(`span`,{className:`font-bold text-white ${e>=2?`text-3xl`:`text-2xl`}`,children:[o.failure_rate.toFixed(1),`%`]})]})}),(0,G.jsx)(`div`,{className:`text-sm text-bambu-gray mt-1`,children:i(`stats.failedPrintsCount`,{failed:o.failed_prints,total:o.total_prints})}),o.trend&&o.trend.length>=2&&(0,G.jsx)(`div`,{className:`${e>=2?`mt-4`:`mt-2 pt-2 border-t border-bambu-dark-tertiary`}`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(Pu,{className:`w-4 h-4 ${o.trend[o.trend.length-1].failure_rate<o.trend[o.trend.length-2].failure_rate?`text-status-ok`:`text-status-error`}`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`stats.lastWeekRate`,{rate:o.trend[o.trend.length-1].failure_rate.toFixed(1)})})]})})]}),u.length>0&&(0,G.jsxs)(`div`,{className:`flex-1 ${e>=2?`border-l border-bambu-dark-tertiary pl-8`:`pt-2`}`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray font-medium mb-2`,children:i(e>=2?`stats.failureReasons`:`stats.topFailureReasons`)}),(0,G.jsx)(`div`,{className:`${e===4?`grid grid-cols-2 gap-x-6 gap-y-1`:`space-y-1`}`,children:u.map(([t,n])=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-sm`,children:[(0,G.jsx)(`span`,{className:`text-white truncate ${e===4?`max-w-[200px]`:`max-w-[160px]`}`,children:t?i(`editArchive.failureReasons.${t}`,{defaultValue:t}):i(`common.unknown`)}),(0,G.jsx)(`span`,{className:`text-bambu-gray ml-2`,children:n})]},t))}),d&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-2`,children:i(`common.more`,{count:l.length-c})})]})]})}function dUe({archives:e,currency:t}){let{t:n}=U(),r=(0,y.useMemo)(()=>{let r=[];if(e.length===0)return r;let i=t=>{let n=null,r=0;return e.forEach(e=>{let i=t(e);i&&i>r&&(r=i,n=e)}),{archive:n,value:r}},a=i(e=>e.status===`completed`?e.actual_time_seconds:null);a.archive&&r.push({icon:js,iconColor:`text-blue-600 dark:text-blue-400`,label:n(`stats.longestPrint`),value:op(a.value),detail:a.archive.print_name||null});let o=i(e=>e.filament_used_grams);o.archive&&r.push({icon:Sl,iconColor:`text-orange-600 dark:text-orange-400`,label:n(`stats.heaviestPrint`),value:v8(o.value),detail:o.archive.print_name||null});let s=i(e=>(e.cost??0)+(e.energy_cost??0));s.archive&&r.push({icon:Ks,iconColor:`text-green-600 dark:text-green-400`,label:n(`stats.mostExpensivePrint`),value:`${t}${s.value.toFixed(2)}`,detail:s.archive.print_name||null});let c=new Map;e.forEach(e=>{let t=ep(e.created_at)||new Date(e.created_at),n=`${t.getFullYear()}-${String(t.getMonth()+1).padStart(2,`0`)}-${String(t.getDate()).padStart(2,`0`)}`;c.set(n,(c.get(n)||0)+1)});let l=``,u=0;c.forEach((e,t)=>{e>u&&(u=e,l=t)}),u>1&&r.push({icon:as,iconColor:`text-purple-600 dark:text-purple-400`,label:n(`stats.busiestDay`),value:`${u} ${n(`common.prints`)}`,detail:(()=>{let[e,t,n]=l.split(`-`).map(Number);return new Date(e,t-1,n).toLocaleDateString(void 0,{month:`short`,day:`numeric`,year:`numeric`})})()});let d=[...e].filter(e=>e.status===`completed`||e.status===`failed`).sort((e,t)=>new Date(t.completed_at||t.created_at).getTime()-new Date(e.completed_at||e.created_at).getTime()),f=0;for(let e of d)if(e.status===`completed`)f++;else break;return f>0&&r.push({icon:rd,iconColor:`text-yellow-600 dark:text-yellow-400`,label:n(`stats.successStreak`),value:`${f}`,detail:f===1?n(`stats.streakPrint`):n(`stats.streakPrints`,{count:f})}),r},[e,t,n]);return r.length===0?(0,G.jsx)(`p`,{className:`text-bambu-gray text-center py-4`,children:n(`stats.noArchiveData`)}):(0,G.jsx)(`div`,{className:`space-y-3`,children:r.map((e,t)=>(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-1.5 rounded-lg bg-bambu-dark ${e.iconColor}`,children:(0,G.jsx)(e.icon,{className:`w-4 h-4`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:e.label}),(0,G.jsxs)(`div`,{className:`flex items-baseline gap-2`,children:[(0,G.jsx)(`span`,{className:`text-sm font-bold text-white`,children:e.value}),e.detail&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray truncate`,children:e.detail})]})]})]},t))})}function fUe(){let{t:e}=U(),{showToast:t}=Gd(),{hasPermission:n,authEnabled:r}=jd(),[i,a]=(0,y.useState)(!1),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(0),[u,d]=(0,y.useState)(0),[f,p]=(0,y.useState)(!1),[m,h]=(0,y.useState)(null),[g,_]=(0,y.useState)(!1),v=r&&n(`stats:filter_by_user`),[b,x]=(0,y.useState)(()=>{try{let e=localStorage.getItem(`bambusy-stats-timeframe`);if(e){let t=JSON.parse(e);if(t.preset)return t}}catch{}return{preset:`all-time`,dateFrom:void 0,dateTo:void 0}}),[S,C]=(0,y.useState)(!1);(0,y.useEffect)(()=>{localStorage.setItem(`bambusy-stats-timeframe`,JSON.stringify(b))},[b]);let w=(0,y.useMemo)(()=>b.preset===`custom`?{dateFrom:b.dateFrom,dateTo:b.dateTo}:eUe(b.preset),[b]);(0,y.useEffect)(()=>{let e=()=>{try{let e=localStorage.getItem(`bambusy-dashboard-layout-v2`);e&&d(JSON.parse(e).hidden?.length||0)}catch{d(0)}};e(),window.addEventListener(`storage`,e);let t=setInterval(e,2e3);return()=>{window.removeEventListener(`storage`,e),clearInterval(t)}},[c]);let T=m===null?void 0:m,{data:E,isLoading:D,isFetching:O,refetch:k}=K({queryKey:[`archiveStats`,w.dateFrom,w.dateTo,T??`all`],queryFn:()=>Z.getArchiveStats({dateFrom:w.dateFrom,dateTo:w.dateTo,createdById:T})}),{data:A}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:j,isFetching:M,refetch:N}=K({queryKey:[`archivesSlim`,w.dateFrom,w.dateTo,T??`all`],queryFn:()=>Z.getArchivesSlim(w.dateFrom,w.dateTo,T)}),{data:P}=K({queryKey:[`settings`],queryFn:Z.getSettings}),{data:F}=K({queryKey:[`users`,`slim`],queryFn:Z.getUsersSlim,enabled:v}),I=(0,y.useMemo)(()=>m===null?e(`stats.allUsers`,`All Users`):m===-1?e(`stats.noUser`,`No User (System)`):F?.find(e=>e.id===m)?.username??`?`,[m,F,e]),L=async n=>{s(!1),a(!0);try{let{blob:r,filename:i}=await Z.exportStats({format:n,days:90,createdById:T}),a=URL.createObjectURL(r),o=document.createElement(`a`);o.href=a,o.download=i,o.click(),URL.revokeObjectURL(a),t(e(`stats.exportDownloaded`))}catch{t(e(`stats.exportFailed`),`error`)}finally{a(!1)}},R=async()=>{p(!0);try{let n=await Z.recalculateCosts();await Promise.all([k(),N()]),t(e(`stats.recalculatedCosts`,{count:n.updated}))}catch{t(e(`stats.recalculateFailed`),`error`)}finally{p(!1)}},z=(O||M)&&!D,B=Pf(P?.currency||`USD`),V=(0,y.useMemo)(()=>new Map([...Object.entries(E?.printer_names||{}),...A?.map(e=>[String(e.id),e.name])||[]]),[E?.printer_names,A]),ee=(0,y.useMemo)(()=>j?.map(e=>e.created_at)||[],[j]);if(D)return(0,G.jsx)(`div`,{className:`p-4 md:p-8`,children:(0,G.jsx)(`div`,{className:`text-center py-12 text-bambu-gray`,children:e(`stats.loadingStats`)})});let te=[{id:`quick-stats`,title:e(`stats.quickStats`),component:(0,G.jsx)(rUe,{stats:E,currency:B}),defaultSize:2},{id:`success-rate`,title:e(`stats.successRate`),component:e=>(0,G.jsx)(iUe,{stats:E,printerMap:V,size:e}),defaultSize:1},{id:`time-accuracy`,title:e(`stats.timeAccuracy`),component:e=>(0,G.jsx)(aUe,{stats:E,printerMap:V,size:e}),defaultSize:1},{id:`failure-analysis`,title:e(`stats.failureAnalysis`),component:e=>(0,G.jsx)(uUe,{size:e,dateFrom:w.dateFrom,dateTo:w.dateTo,createdById:T}),defaultSize:1},{id:`print-activity`,title:e(`stats.printActivity`),component:e=>(0,G.jsx)(sUe,{printDates:ee,size:e,dateFrom:w.dateFrom,dateTo:w.dateTo}),defaultSize:2},{id:`records`,title:e(`stats.records`),component:(0,G.jsx)(dUe,{archives:j||[],currency:B}),defaultSize:1},{id:`printer-stats`,title:e(`stats.printerStats`),component:(0,G.jsx)(cUe,{stats:E,archives:j||[],printerMap:V}),defaultSize:4},{id:`filament-trends`,title:e(`stats.filamentTrends`),component:(0,G.jsx)(lUe,{archives:j||[],currency:B,dateFrom:w.dateFrom,dateTo:w.dateTo}),defaultSize:4}];return(0,G.jsxs)(`div`,{className:`p-4 md:p-8`,children:[(0,G.jsxs)(`div`,{className:`flex flex-col sm:flex-row sm:items-center sm:justify-between gap-4 mb-6`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(cs,{className:`w-7 h-7 text-bambu-green`}),e(`stats.title`)]}),z&&(0,G.jsx)(Y,{className:`w-5 h-5 text-bambu-green animate-spin`})]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:e(`stats.subtitle`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-wrap`,children:[u>0&&(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>{window.dispatchEvent(new CustomEvent(`toggle-hidden-panel`))},children:[(0,G.jsx)(ic,{className:`w-4 h-4`}),e(`stats.hiddenCount`,{count:u})]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>{localStorage.removeItem(`bambusy-dashboard-layout-v2`),l(e=>e+1),t(e(`stats.layoutReset`))},disabled:!n(`settings:update`),title:n(`settings:update`)?void 0:e(`stats.noPermissionResetLayout`),children:[(0,G.jsx)(Ul,{className:`w-4 h-4`}),e(`stats.resetLayout`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:R,disabled:f||!n(`archives:update_all`),title:n(`archives:update_all`)?e(`stats.recalculateCostsHint`):e(`stats.noPermissionRecalculate`),children:[f?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(ns,{className:`w-4 h-4`}),e(`stats.recalculateCosts`)]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>s(!o),disabled:i,children:[i?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(uc,{className:`w-4 h-4`}),e(`stats.exportStats`)]}),o&&(0,G.jsxs)(`div`,{className:`absolute right-0 top-full mt-1 w-48 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl z-20`,children:[(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-white hover:bg-bambu-dark-tertiary transition-colors flex items-center gap-2 rounded-t-lg`,onClick:()=>L(`csv`),children:[(0,G.jsx)(dc,{className:`w-4 h-4`}),e(`stats.exportAsCsv`)]}),(0,G.jsxs)(`button`,{className:`w-full px-4 py-2 text-left text-white hover:bg-bambu-dark-tertiary transition-colors flex items-center gap-2 rounded-b-lg`,onClick:()=>L(`xlsx`),children:[(0,G.jsx)(uc,{className:`w-4 h-4`}),e(`stats.exportAsExcel`)]})]})]}),v&&F&&F.length>0&&(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>_(!g),children:[(0,G.jsx)(Hu,{className:`w-4 h-4`}),I,(0,G.jsx)(ps,{className:`w-3 h-3`})]}),g&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-10`,onClick:()=>_(!1)}),(0,G.jsxs)(`div`,{className:`absolute right-0 top-full mt-1 w-48 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl z-20 p-2 max-h-64 overflow-y-auto`,children:[(0,G.jsx)(`button`,{className:`w-full px-3 py-2 text-left text-sm rounded-md transition-colors ${m===null?`bg-bambu-green text-white`:`text-white hover:bg-bambu-dark-tertiary`}`,onClick:()=>{h(null),_(!1)},children:e(`stats.allUsers`,`All Users`)}),(0,G.jsx)(`button`,{className:`w-full px-3 py-2 text-left text-sm rounded-md transition-colors ${m===-1?`bg-bambu-green text-white`:`text-white hover:bg-bambu-dark-tertiary`}`,onClick:()=>{h(-1),_(!1)},children:e(`stats.noUser`,`No User (System)`)}),(0,G.jsx)(`div`,{className:`border-t border-bambu-dark-tertiary my-1`}),F.map(e=>(0,G.jsx)(`button`,{className:`w-full px-3 py-2 text-left text-sm rounded-md transition-colors ${m===e.id?`bg-bambu-green text-white`:`text-white hover:bg-bambu-dark-tertiary`}`,onClick:()=>{h(e.id),_(!1)},children:e.username},e.id))]})]})]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>C(!S),children:[(0,G.jsx)(as,{className:`w-4 h-4`}),e(`stats.timeframe.${b.preset}`),(0,G.jsx)(ps,{className:`w-3 h-3`})]}),S&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-10`,onClick:()=>C(!1)}),(0,G.jsxs)(`div`,{className:`absolute right-0 top-full mt-1 w-64 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl z-20 p-2`,children:[tUe.map(t=>(0,G.jsx)(`button`,{className:`w-full px-3 py-2 text-left text-sm rounded-md transition-colors ${b.preset===t?`bg-bambu-green text-white`:`text-white hover:bg-bambu-dark-tertiary`}`,onClick:()=>{x({preset:t,dateFrom:void 0,dateTo:void 0}),C(!1)},children:e(`stats.timeframe.${t}`)},t)),(0,G.jsx)(`div`,{className:`border-t border-bambu-dark-tertiary my-2`}),(0,G.jsx)(`button`,{className:`w-full px-3 py-2 text-left text-sm rounded-md transition-colors ${b.preset===`custom`?`bg-bambu-green text-white`:`text-white hover:bg-bambu-dark-tertiary`}`,onClick:()=>x(e=>({...e,preset:`custom`})),children:e(`stats.timeframe.custom`)}),b.preset===`custom`&&(0,G.jsxs)(`div`,{className:`mt-2 px-1 pb-1 space-y-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray block mb-1`,children:e(`stats.timeframe.from`)}),(0,G.jsx)(`input`,{type:`date`,value:b.dateFrom||``,max:b.dateTo||new Date().toISOString().split(`T`)[0],onChange:e=>x(t=>({...t,dateFrom:e.target.value||void 0})),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded-md px-3 py-1.5 text-sm text-white`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray block mb-1`,children:e(`stats.timeframe.to`)}),(0,G.jsx)(`input`,{type:`date`,value:b.dateTo||``,min:b.dateFrom,max:new Date().toISOString().split(`T`)[0],onChange:e=>x(t=>({...t,dateTo:e.target.value||void 0})),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded-md px-3 py-1.5 text-sm text-white`})]}),(0,G.jsx)(Q,{variant:`primary`,onClick:()=>C(!1),className:`w-full`,children:e(`common.apply`)})]})]})]})]})]})]}),(0,G.jsx)($He,{widgets:te,storageKey:`bambusy-dashboard-layout-v2`,stackBelow:640,hideControls:!0},c)]})}function w8(e){return e.length<8?`tooShort`:/[A-Z]/.test(e)?/[a-z]/.test(e)?/\d/.test(e)?/[^A-Za-z0-9]/.test(e)?null:`needsSpecial`:`needsDigit`:`needsLowercase`:`needsUppercase`}var T8=[`inventory-locations`];function E8(e){return e.invalidateQueries({queryKey:T8})}function D8(e,t){return Promise.all([e.invalidateQueries({queryKey:[...t]}),E8(e)])}var O8=`bambuddy-location-sensor-show-on-card-defaults`,k8={alertAbove:``,alertBelow:``,notifyOnAlert:!1,showOnCard:!0};function pUe(){return{temperature:{...k8,alertAbove:`30`,alertBelow:`20`},humidity:{...k8,alertAbove:`30`,alertBelow:`10`},battery:{...k8,alertBelow:`10`}}}function mUe(){try{let e=localStorage.getItem(O8);return e?JSON.parse(e):{}}catch{return{}}}function A8(e){let t=pUe();if(e)try{let n=JSON.parse(e);Object.keys(t).forEach(e=>{let r=n[e];r&&(typeof r.alertAbove==`string`&&(t[e].alertAbove=r.alertAbove),typeof r.alertBelow==`string`&&(t[e].alertBelow=r.alertBelow),typeof r.notifyOnAlert==`boolean`&&(t[e].notifyOnAlert=r.notifyOnAlert))})}catch{}let n=mUe();return Object.keys(t).forEach(e=>{typeof n[e]==`boolean`&&(t[e].showOnCard=n[e])}),t}function hUe(e){let t={};return Object.keys(e).forEach(n=>{t[n]={alertAbove:e[n].alertAbove,alertBelow:e[n].alertBelow,notifyOnAlert:e[n].notifyOnAlert}}),JSON.stringify(t)}function gUe(e){try{let t={};Object.keys(e).forEach(n=>{t[n]=e[n].showOnCard}),localStorage.setItem(O8,JSON.stringify(t))}catch{return}}var j8=`bambuddy-location-sensor-colorize-values`;function M8(){try{let e=localStorage.getItem(j8);return e?e===`true`:!0}catch{return!0}}var N8=`bambuddy:location-sensor-color-prefs-changed`;function P8(){window.dispatchEvent(new Event(N8))}function _Ue(e){try{localStorage.setItem(j8,String(e))}catch{return}P8()}var F8=[`red`,`orange`,`yellow`,`green`,`blue`,`purple`,`pink`],I8={red:`text-red-400`,orange:`text-orange-400`,yellow:`text-yellow-400`,green:`text-green-400`,blue:`text-blue-400`,purple:`text-purple-400`,pink:`text-pink-400`},L8=`bambuddy-location-sensor-alert-above-color`,R8=`bambuddy-location-sensor-alert-below-color`,z8=`bambuddy-location-sensor-alert-optimal-color`;function B8(e){return!!e&&F8.includes(e)}function vUe(){try{let e=localStorage.getItem(L8);return B8(e)?e:`purple`}catch{return`purple`}}function yUe(e){try{localStorage.setItem(L8,e)}catch{return}P8()}function bUe(){try{let e=localStorage.getItem(R8);return B8(e)?e:`red`}catch{return`red`}}function xUe(e){try{localStorage.setItem(R8,e)}catch{return}P8()}function SUe(){try{let e=localStorage.getItem(z8);return B8(e)?e:`green`}catch{return`green`}}function CUe(e){try{localStorage.setItem(z8,e)}catch{return}P8()}function wUe(){return{colorize:M8(),aboveColor:vUe(),belowColor:bUe(),optimalColor:SUe()}}function TUe(){let[e,t]=(0,y.useState)(wUe);return(0,y.useEffect)(()=>{let e=()=>t(wUe());return window.addEventListener(N8,e),()=>window.removeEventListener(N8,e)},[]),e}function EUe(e){return!e.reachable||e.state===null?null:e.kind===`numeric`?e.alert_above===null&&e.alert_below===null||e.value===null?null:e.alert_above!==null&&e.value>e.alert_above?`above`:e.alert_below!==null&&e.value<e.alert_below?`below`:`ok`:e.alert_state===null?null:e.state.toLowerCase()===e.alert_state?`above`:`ok`}function DUe(e,t,n,r){return e===`above`?I8[t]:e===`below`?I8[n]:e===`ok`?I8[r]:``}var V8={PLA:0,PETG:0,"PETG-CF":40,ABS:45,ASA:45,PA:50,"PA-CF":55,PC:50,"PC-FR":50,TPU:0,PVA:0,default:0},OUe=[`PA-CF`,`PA`,`PC`,`PC-FR`,`ABS`,`ASA`,`PETG-CF`,`PETG`,`PLA`,`TPU`,`PVA`,`default`];function kUe(e){if(!e)return{...V8};try{let t=JSON.parse(e);if(t&&typeof t==`object`&&!Array.isArray(t)){let e={};for(let[n,r]of Object.entries(t)){let t=typeof r==`number`?r:Number(r);Number.isFinite(t)&&(e[n]=Math.max(0,Math.min(65,Math.round(t))))}return e.default===void 0&&(e.default=V8.default),e}}catch{}return{...V8}}function AUe(e){let t={};for(let n of OUe)e[n]!==void 0&&(t[n]=e[n]);for(let[n,r]of Object.entries(e))n in t||(t[n]=r);return JSON.stringify(t)}function jUe({value:e,onChange:t,disabled:n=!1}){let{t:r}=U(),i=kUe(e),a=(e,n)=>{let r=Math.max(0,Math.min(65,Math.round(n)));t(AUe({...i,[e]:r}))};return(0,G.jsx)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 gap-x-3 gap-y-1.5`,children:OUe.map(e=>{let t=i[e]??V8[e]??0,o=e==="default"?r(`settings.preheatFilamentTargetsDefaultRow`,`Other / unmapped`):e;return(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2`,children:[(0,G.jsx)(`span`,{className:`text-xs ${e==="default"?`text-bambu-gray italic`:`text-bambu-gray`}`,children:o}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`input`,{type:`number`,min:0,max:65,step:1,value:t,onChange:t=>a(e,parseInt(t.target.value,10)||0),disabled:n,className:`w-16 px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-xs text-right focus:outline-none focus:border-bambu-green disabled:opacity-50`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`°C`})]})]},e)})})}function H8(e,t,n){if(!e)return null;let r=(e[n.source]?.[t]??[]).find(e=>e.id===n.id);return r?r.name:null}var MUe={orca_cloud:`Orca Cloud`,cloud:`Bambu Cloud`,local:`Imported`,standard:`Standard`};function NUe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),{data:r,isLoading:i,error:a}=K({queryKey:[`slicer-pipelines`],queryFn:()=>Z.listSlicerPipelines()}),{data:o}=K({queryKey:[`slicer-presets`],queryFn:()=>Z.getSlicerPresets()}),{data:s}=K({queryKey:[`printers`],queryFn:()=>Z.getPrinters()}),c=q({mutationFn:({id:e,name:t,description:n,target_printer_id:r,target_kind:i,target_model_class:a,fanout_strategy:o})=>Z.updateSlicerPipeline(e,{name:t,description:n,target_printer_id:r,target_kind:i,target_model_class:a,fanout_strategy:o}),onSuccess:()=>{t.invalidateQueries({queryKey:[`slicer-pipelines`]}),n(e(`settings.pipelines.toast.saved`,`Pipeline saved`),`success`)},onError:t=>{n(t.message||e(`settings.pipelines.toast.saveFailed`,`Save failed`),`error`)}}),l=q({mutationFn:e=>Z.deleteSlicerPipeline(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`slicer-pipelines`]}),n(e(`settings.pipelines.toast.deleted`,`Pipeline deleted`),`success`)},onError:t=>{n(t.message||e(`settings.pipelines.toast.deleteFailed`,`Delete failed`),`error`)}}),[u,d]=(0,y.useState)(``),[f,p]=(0,y.useState)(``),m=(0,y.useMemo)(()=>r?.pipelines??[],[r?.pipelines]),h=(0,y.useMemo)(()=>{let e=new Set,t=new Set,n=!1;for(let r of m)r.target_kind===`printer_class`&&r.target_model_class?t.add(r.target_model_class):r.target_printer_id?e.add(r.target_printer_id):n=!0;return{printers:(s??[]).filter(t=>e.has(t.id)),classes:Array.from(t).sort(),anyWithoutTarget:n}},[m,s]),g=(0,y.useMemo)(()=>{let e=u.trim().toLowerCase();return m.filter(t=>{if(e&&!t.name.toLowerCase().includes(e))return!1;if(f===`none`){if(t.target_kind===`printer_class`?t.target_model_class:t.target_printer_id!==null)return!1}else if(f.startsWith(`p:`)){let e=parseInt(f.slice(2),10);if(t.target_kind===`printer_class`||t.target_printer_id!==e)return!1}else if(f.startsWith(`c:`)){let e=f.slice(2);if(t.target_kind!==`printer_class`||t.target_model_class!==e)return!1}return!0})},[m,u,f]);return(0,G.jsxs)(Ld,{children:[(0,G.jsxs)(Rd,{children:[(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)($u,{className:`w-4 h-4 text-bambu-green`}),e(`settings.pipelines.title`,`Slicer Pipelines`)]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`settings.pipelines.subtitle`,`Reusable preset bundles (printer + process + filaments + bed type). Save one from the Slice dialog and apply it with a single click on the next file.`)})]}),(0,G.jsxs)(zd,{children:[i&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),e(`settings.pipelines.loading`,`Loading pipelines…`)]}),a&&(0,G.jsx)(`div`,{className:`text-sm text-red-700 dark:text-red-400`,children:e(`settings.pipelines.loadError`,`Could not load pipelines.`)}),!i&&!a&&m.length>0&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 mb-3`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1 min-w-[12rem]`,children:[(0,G.jsx)(Zl,{className:`absolute left-2 top-1/2 -translate-y-1/2 w-3.5 h-3.5 text-bambu-gray pointer-events-none`}),(0,G.jsx)(`input`,{type:`search`,value:u,onChange:e=>d(e.target.value),placeholder:e(`settings.pipelines.searchPlaceholder`,`Search pipelines…`),"aria-label":e(`settings.pipelines.searchPlaceholder`,`Search pipelines…`),className:`w-full pl-7 pr-2 py-1 text-xs bg-bambu-dark border border-bambu-dark-tertiary rounded text-white`})]}),(0,G.jsxs)(`select`,{value:f,onChange:e=>p(e.target.value),"aria-label":e(`settings.pipelines.filterTarget`,`Filter by target`),className:`text-xs px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white`,children:[(0,G.jsx)(`option`,{value:``,children:e(`settings.pipelines.filter.all`,`All targets`)}),h.printers.length>0&&(0,G.jsx)(`optgroup`,{label:e(`settings.pipelines.field.targetKindSpecific`,`Specific printer`),children:h.printers.map(e=>(0,G.jsx)(`option`,{value:`p:${e.id}`,children:e.name},`p-${e.id}`))}),h.classes.length>0&&(0,G.jsx)(`optgroup`,{label:e(`settings.pipelines.field.targetKindClass`,`Printer class`),children:h.classes.map(t=>(0,G.jsx)(`option`,{value:`c:${t}`,children:e(`library.runWithPipeline.classTarget`,`Any {{model}}`,{model:t})},`c-${t}`))}),h.anyWithoutTarget&&(0,G.jsx)(`option`,{value:`none`,children:e(`settings.pipelines.filter.noTarget`,`No target set`)})]}),(u||f)&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:e(`settings.pipelines.filter.count`,`{{shown}} / {{total}}`,{shown:g.length,total:m.length})})]}),!i&&!a&&m.length===0&&(0,G.jsxs)(`div`,{className:`text-sm text-bambu-gray space-y-2`,children:[(0,G.jsx)(`p`,{children:e(`settings.pipelines.empty.title`,`No pipelines yet.`)}),(0,G.jsx)(`p`,{children:e(`settings.pipelines.empty.howto`,`Open the Slice dialog for any file, pick your printer / process / filaments / bed type, then click "Save as pipeline". Your saved pipelines will appear here.`)})]}),!i&&!a&&m.length>0&&g.length===0&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`settings.pipelines.filter.noMatches`,`No pipelines match the current filters.`)}),!i&&!a&&g.length>0&&(0,G.jsx)(`div`,{className:`space-y-2`,children:g.map(t=>(0,G.jsx)(PUe,{pipeline:t,presets:o,printers:s??[],onSave:e=>c.mutate({id:t.id,...e}),onDelete:()=>{confirm(e(`settings.pipelines.confirmDelete`,`Delete this pipeline? This cannot be undone.`))&&l.mutate(t.id)},saving:c.isPending,deleting:l.isPending},t.id))})]})]})}function PUe({pipeline:e,presets:t,printers:n,onSave:r,onDelete:i,saving:a,deleting:o}){let{t:s}=U(),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(e.name),[f,p]=(0,y.useState)(e.description??``),[m,h]=(0,y.useState)(e.target_printer_id),[g,_]=(0,y.useState)(e.target_kind===`printer_class`?`printer_class`:`specific_printer`),[v,b]=(0,y.useState)(e.target_model_class??``),[x,S]=(0,y.useState)(e.fanout_strategy??`max_parallel`),C=Array.from(new Set(n.map(e=>e.model).filter(e=>!!e))).sort(),{data:w}=K({queryKey:[`pipeline-runs`,e.id],queryFn:()=>Z.listPipelineRuns(e.id,1),enabled:!c,refetchInterval:15e3}),T=w?.runs?.[0],E=H8(t,`printer`,e.printer_preset),D=H8(t,`process`,e.process_preset),O=e.filament_presets.map(e=>H8(t,`filament`,e)),k=e.filament_presets.length>1&&e.filament_presets.every(t=>t.source===e.filament_presets[0].source&&t.id===e.filament_presets[0].id),A=t!==void 0&&(E===null||D===null||O.some(e=>e===null)),j=e.target_printer_id?n.find(t=>t.id===e.target_printer_id):void 0,M=e.target_kind===`printer_class`,N=M?!e.target_model_class:e.target_printer_id===null;return(0,G.jsxs)(`div`,{className:`rounded-md border border-bambu-dark-tertiary bg-bambu-dark/40 px-3 py-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-3`,children:[(0,G.jsx)(`div`,{className:`min-w-0 flex-1`,children:c?(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`input`,{value:u,onChange:e=>d(e.target.value),"aria-label":s(`settings.pipelines.field.name`,`Pipeline name`),placeholder:s(`settings.pipelines.field.name`,`Pipeline name`),className:`w-full px-2 py-1 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded text-white`}),(0,G.jsx)(`textarea`,{value:f,onChange:e=>p(e.target.value),"aria-label":s(`settings.pipelines.field.description`,`Description`),placeholder:s(`settings.pipelines.field.description`,`Description`),rows:2,className:`w-full px-2 py-1 text-xs bg-bambu-dark border border-bambu-dark-tertiary rounded text-white`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray block mb-1`,children:s(`settings.pipelines.field.targetKind`,`Target type`)}),(0,G.jsxs)(`div`,{className:`flex gap-3 text-xs`,children:[(0,G.jsxs)(`label`,{className:`flex items-center gap-1 text-white`,children:[(0,G.jsx)(`input`,{type:`radio`,name:`target-kind-${e.id}`,value:`specific_printer`,checked:g===`specific_printer`,onChange:()=>_(`specific_printer`),"aria-label":s(`settings.pipelines.field.targetKindSpecific`,`Specific printer`)}),s(`settings.pipelines.field.targetKindSpecific`,`Specific printer`)]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-1 text-white`,children:[(0,G.jsx)(`input`,{type:`radio`,name:`target-kind-${e.id}`,value:`printer_class`,checked:g===`printer_class`,onChange:()=>_(`printer_class`),"aria-label":s(`settings.pipelines.field.targetKindClass`,`Printer class`)}),s(`settings.pipelines.field.targetKindClass`,`Printer class`)]})]})]}),g===`specific_printer`?(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray block mb-1`,children:s(`settings.pipelines.field.targetPrinter`,`Target printer`)}),(0,G.jsxs)(`select`,{value:m??``,onChange:e=>h(e.target.value?parseInt(e.target.value,10):null),"aria-label":s(`settings.pipelines.field.targetPrinter`,`Target printer`),className:`w-full px-2 py-1 text-xs bg-bambu-dark border border-bambu-dark-tertiary rounded text-white`,children:[(0,G.jsx)(`option`,{value:``,children:s(`settings.pipelines.field.noTarget`,`— No target —`)}),n.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]}):(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray block mb-1`,children:s(`settings.pipelines.field.targetModelClass`,`Printer model`)}),(0,G.jsxs)(`select`,{value:v,onChange:e=>b(e.target.value),"aria-label":s(`settings.pipelines.field.targetModelClass`,`Printer model`),className:`w-full px-2 py-1 text-xs bg-bambu-dark border border-bambu-dark-tertiary rounded text-white`,children:[(0,G.jsx)(`option`,{value:``,children:s(`settings.pipelines.field.noTarget`,`— No target —`)}),C.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray block mb-1`,children:s(`settings.pipelines.field.fanoutStrategy`,`Fanout strategy`)}),(0,G.jsxs)(`select`,{value:x,onChange:e=>S(e.target.value),"aria-label":s(`settings.pipelines.field.fanoutStrategy`,`Fanout strategy`),className:`w-full px-2 py-1 text-xs bg-bambu-dark border border-bambu-dark-tertiary rounded text-white`,children:[(0,G.jsx)(`option`,{value:`max_parallel`,children:s(`settings.pipelines.field.fanout.max_parallel`,`Max parallel — distribute across any idle matching printer`)}),(0,G.jsx)(`option`,{value:`round_robin`,children:s(`settings.pipelines.field.fanout.round_robin`,`Round robin — cycle through eligible printers`)}),(0,G.jsx)(`option`,{value:`fill_one_first`,children:s(`settings.pipelines.field.fanout.fill_one_first`,`Fill one first — pin all copies to one printer`)})]})]})]})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-baseline gap-x-2 gap-y-1`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-white truncate`,children:e.name}),(0,G.jsxs)(`span`,{className:`text-xs px-1.5 py-0.5 rounded inline-flex items-center gap-1 ${N?`bg-amber-100 dark:bg-amber-500/15 text-amber-700 dark:text-amber-400`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:[(0,G.jsx)(Ll,{className:`w-3 h-3`}),N?s(`settings.pipelines.noTargetHint`,`Set a target printer to run this`):M?(0,G.jsxs)(G.Fragment,{children:[s(`library.runWithPipeline.classTarget`,`Any {{model}}`,{model:e.target_model_class}),e.fanout_strategy&&(0,G.jsxs)(`span`,{className:`text-bambu-gray/60`,children:[` · `,s(`settings.pipelines.field.fanoutShort.${e.fanout_strategy}`,e.fanout_strategy)]})]}):j?.name??``]})]}),e.description&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:e.description})]})}),(0,G.jsx)(`div`,{className:`flex items-center gap-1 flex-shrink-0`,children:c?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`button`,{onClick:()=>{let e=u.trim();e&&(r({name:e,description:f.trim()||null,target_kind:g,target_printer_id:g===`specific_printer`?m??0:0,target_model_class:g===`printer_class`&&v||null,fanout_strategy:x}),l(!1))},disabled:a||!u.trim(),"aria-label":s(`settings.pipelines.action.save`,`Save`),className:`p-1.5 text-bambu-green hover:bg-bambu-dark-tertiary rounded disabled:opacity-50`,children:(0,G.jsx)(fs,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>{d(e.name),p(e.description??``),h(e.target_printer_id),_(e.target_kind===`printer_class`?`printer_class`:`specific_printer`),b(e.target_model_class??``),S(e.fanout_strategy??`max_parallel`),l(!1)},"aria-label":s(`settings.pipelines.action.cancel`,`Cancel`),className:`p-1.5 text-bambu-gray hover:bg-bambu-dark-tertiary rounded`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`button`,{onClick:()=>l(!0),"aria-label":s(`settings.pipelines.action.rename`,`Rename`),className:`p-1.5 text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary rounded`,children:(0,G.jsx)(Ol,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:i,disabled:o,"aria-label":s(`settings.pipelines.action.delete`,`Delete`),className:`p-1.5 text-bambu-gray hover:text-red-600 dark:hover:text-red-400 hover:bg-bambu-dark-tertiary rounded disabled:opacity-50`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})})]}),!c&&(0,G.jsxs)(`div`,{className:`mt-2 grid grid-cols-1 md:grid-cols-2 gap-x-4 gap-y-2 text-xs`,children:[(0,G.jsxs)(`div`,{className:`space-y-0.5`,children:[(0,G.jsx)(`div`,{className:`text-[10px] uppercase tracking-wide text-bambu-gray/60`,children:s(`settings.pipelines.group.profiles`,`Profiles`)}),(0,G.jsx)(U8,{label:s(`settings.pipelines.slot.printer`,`Printer`),ref:e.printer_preset,name:E}),(0,G.jsx)(U8,{label:s(`settings.pipelines.slot.process`,`Process`),ref:e.process_preset,name:D}),e.bed_type&&(0,G.jsxs)(`div`,{className:`text-bambu-gray`,children:[(0,G.jsxs)(`span`,{className:`font-medium text-bambu-gray/80`,children:[s(`settings.pipelines.slot.bed`,`Bed`),`:`]}),` `,(0,G.jsx)(`span`,{className:`text-white`,children:e.bed_type})]})]}),(0,G.jsxs)(`div`,{className:`space-y-0.5`,children:[(0,G.jsxs)(`div`,{className:`text-[10px] uppercase tracking-wide text-bambu-gray/60`,children:[s(`settings.pipelines.group.filaments`,`Filaments`),e.filament_presets.length>1&&(0,G.jsxs)(`span`,{className:`text-bambu-gray/60 normal-case ml-1`,children:[`(`,e.filament_presets.length,`)`]})]}),k?(0,G.jsx)(U8,{label:s(`settings.pipelines.slot.filamentAll`,`All {{n}} slots`,{n:e.filament_presets.length}),ref:e.filament_presets[0],name:O[0]}):e.filament_presets.map((t,n)=>(0,G.jsx)(U8,{label:e.filament_presets.length>1?s(`settings.pipelines.slot.filamentN`,`Filament {{n}}`,{n:n+1}):s(`settings.pipelines.slot.filament`,`Filament`),ref:t,name:O[n]},n))]})]}),!c&&T&&(0,G.jsxs)(`div`,{className:`mt-1.5 text-xs text-bambu-gray flex items-center gap-1`,children:[(0,G.jsxs)(`span`,{className:`font-medium text-bambu-gray/80`,children:[s(`settings.pipelines.runs.lastRun`,`Last run`),`:`]}),` `,(0,G.jsx)(FUe,{status:T.status}),T.created_at&&(0,G.jsxs)(`span`,{className:`text-bambu-gray/60`,children:[`· `,new Date(T.created_at).toLocaleString()]})]}),N&&!c&&(0,G.jsxs)(`div`,{className:`mt-2 flex items-center gap-1.5 text-xs text-amber-700 dark:text-amber-400`,children:[(0,G.jsx)(Iu,{className:`w-3.5 h-3.5`}),s(`settings.pipelines.noTargetWarning`,`Set a target printer before running this pipeline.`)]}),A&&!c&&(0,G.jsxs)(`div`,{className:`mt-2 flex items-center gap-1.5 text-xs text-amber-700 dark:text-amber-400`,children:[(0,G.jsx)(Iu,{className:`w-3.5 h-3.5`}),s(`settings.pipelines.staleWarning`,`One or more referenced presets no longer exist. Re-save this pipeline from the Slice dialog to fix.`)]})]})}function FUe({status:e}){let{t}=U();return(0,G.jsx)(`span`,{className:{queued:`text-bambu-gray`,slicing:`text-blue-700 dark:text-blue-400`,dispatching:`text-blue-700 dark:text-blue-400`,in_progress:`text-bambu-green`,completed:`text-bambu-green`,failed:`text-red-700 dark:text-red-400`,partial_failure:`text-amber-700 dark:text-amber-400`,cancelled:`text-bambu-gray`}[e],children:t(`settings.pipelines.runs.status.${e}`,e)})}function U8({label:e,ref:t,name:n}){return(0,G.jsxs)(`div`,{className:`text-bambu-gray truncate`,children:[(0,G.jsxs)(`span`,{className:`font-medium text-bambu-gray/80`,children:[e,`:`]}),` `,n?(0,G.jsx)(`span`,{className:`text-white`,children:n}):(0,G.jsxs)(`span`,{className:`text-amber-700 dark:text-amber-400`,children:[`[`,MUe[t.source],` #`,t.id,`]`]})]})}var IUe=90,LUe=365;function W8(e){if(!e)return`—`;let t=ep(e);return t?t.toLocaleString():`—`}function RUe(e){let t=ep(e);return t?t.getTime()<Date.now():!1}function zUe({onCreated:e}){let{t}=U(),{showToast:n}=Gd(),[r,i]=(0,y.useState)(``),[a,o]=(0,y.useState)(IUe),[s,c]=(0,y.useState)(`camera_stream`),[l,u]=(0,y.useState)(!1);return(0,G.jsxs)(`form`,{onSubmit:async l=>{if(l.preventDefault(),r.trim()){u(!0);try{e(await Z.createLongLivedCameraToken({name:r.trim(),expires_in_days:a,scope:s})),i(``),o(IUe),c(`camera_stream`),n(t(`cameraTokens.toast.created`,`Token created`))}catch(e){n(e instanceof Error?e.message:t(`cameraTokens.toast.createFailed`,`Failed to create token`),`error`)}finally{u(!1)}}},className:`bg-bambu-dark-secondary rounded-lg p-4 mb-6 border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`h3`,{className:`text-base font-semibold text-white mb-3`,children:t(`cameraTokens.create.title`,`Create new token`)}),(0,G.jsxs)(`div`,{className:`grid gap-3 md:grid-cols-[1fr_180px_140px_auto]`,children:[(0,G.jsx)(`input`,{type:`text`,maxLength:100,required:!0,value:r,onChange:e=>i(e.target.value),placeholder:t(`cameraTokens.create.namePlaceholder`,`e.g. Home Assistant`),className:`px-3 py-2 bg-bambu-dark rounded-md text-white border border-bambu-dark-tertiary focus:border-bambu-green focus:outline-none`,"aria-label":t(`cameraTokens.create.nameLabel`,`Token name`)}),(0,G.jsxs)(`select`,{value:s,onChange:e=>c(e.target.value),className:`px-3 py-2 bg-bambu-dark rounded-md text-white border border-bambu-dark-tertiary focus:border-bambu-green focus:outline-none`,"aria-label":t(`cameraTokens.create.scopeLabel`,`Scope`),children:[(0,G.jsx)(`option`,{value:`camera_stream`,children:t(`cameraTokens.scope.camera_stream`,`Camera stream`)}),(0,G.jsx)(`option`,{value:`camwall`,children:t(`cameraTokens.scope.camwall`,`Cam Wall`)}),(0,G.jsx)(`option`,{value:`overlay`,children:t(`cameraTokens.scope.overlay`,`Streaming Overlay`)})]}),(0,G.jsx)(`input`,{type:`number`,min:1,max:LUe,required:!0,value:a,onChange:e=>{let t=Number(e.target.value);o(Math.min(Math.max(t,1),LUe))},className:`px-3 py-2 bg-bambu-dark rounded-md text-white border border-bambu-dark-tertiary focus:border-bambu-green focus:outline-none`,"aria-label":t(`cameraTokens.create.daysLabel`,`Days until expiry`)}),(0,G.jsxs)(`button`,{type:`submit`,disabled:l||!r.trim(),className:`flex items-center gap-2 px-4 py-2 bg-bambu-green text-white rounded-md hover:bg-bambu-green/90 disabled:opacity-50 disabled:cursor-not-allowed`,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),t(`cameraTokens.create.submit`,`Create`)]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-2`,children:s===`camwall`?t(`cameraTokens.create.hintCamWall`,`A Cam Wall token opens /camwall on a screen with no login — it can see every printer's name and state, and their camera streams. It cannot see filenames, addresses or access codes.`):s===`overlay`?t(`cameraTokens.create.hintOverlay`,`A Streaming Overlay token opens /overlay/{printerId} on a screen with no login — for OBS or any live stream. It can see one printer's camera stream plus its live print status, including the filename shown on screen. It cannot see addresses or access codes.`):t(`cameraTokens.create.hintCameraStream`,`A camera-stream token can only fetch camera streams and snapshots. Use it for Home Assistant, Frigate, or anything embedding a single camera.`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:t(`cameraTokens.create.hint`,`Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now.`)})]})}function BUe({token:e,onConfirm:t,onCancel:n}){let{t:r}=U();return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/60 flex items-center justify-center z-50 p-4`,role:`dialog`,"aria-modal":`true`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg p-6 max-w-md w-full border border-red-500/40`,children:[(0,G.jsxs)(`div`,{className:`flex items-start gap-3 mb-4`,children:[(0,G.jsx)(Iu,{className:`w-6 h-6 text-red-600 dark:text-red-400 flex-shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:r(`cameraTokens.confirmRevoke.title`,`Revoke this token?`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:r(`cameraTokens.confirmRevoke.body`,`Any device using "{{name}}" will lose access immediately. This cannot be undone.`,{name:e.name})})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:n,className:`px-4 py-2 bg-bambu-dark-tertiary text-white rounded-md hover:bg-bambu-dark-tertiary/80`,children:r(`cameraTokens.confirmRevoke.cancel`,`Cancel`)}),(0,G.jsx)(`button`,{type:`button`,onClick:t,className:`px-4 py-2 bg-red-500 text-white rounded-md hover:bg-red-600`,children:r(`cameraTokens.confirmRevoke.confirm`,`Revoke`)})]})]})})}function VUe({token:e,onClose:t}){let{t:n}=U(),{showToast:r}=Gd(),i=e.token??``,a=e.scope===`camwall`&&i?`${window.location.origin}/camwall?token=${encodeURIComponent(i)}`:null,o=e.scope===`overlay`&&i?`${window.location.origin}/overlay/1?token=${encodeURIComponent(i)}`:null,s=async e=>{if(e)try{if(navigator.clipboard&&window.isSecureContext)await navigator.clipboard.writeText(e);else{let t=document.createElement(`textarea`);t.value=e,t.style.position=`fixed`,t.style.opacity=`0`,document.body.appendChild(t);try{t.select(),document.execCommand(`copy`)}finally{document.body.removeChild(t)}}r(n(`cameraTokens.toast.copied`,`Copied to clipboard`))}catch{r(n(`cameraTokens.toast.copyFailed`,`Copy failed — select and copy manually`),`error`)}};return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/60 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg p-6 max-w-2xl w-full border border-bambu-green/40`,children:[(0,G.jsxs)(`div`,{className:`flex items-start gap-3 mb-4`,children:[(0,G.jsx)(Iu,{className:`w-6 h-6 text-yellow-600 dark:text-yellow-400 flex-shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:n(`cameraTokens.created.title`,`Token created — copy it now`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:n(`cameraTokens.created.warning`,`This is the only time this token will be visible. After you close this dialog you can never view it again.`)})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-4`,children:[(0,G.jsx)(`code`,{className:`flex-1 px-3 py-2 bg-bambu-dark rounded-md text-bambu-green text-xs break-all font-mono select-all`,children:i}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>s(i),className:`flex items-center gap-2 px-3 py-2 bg-bambu-green text-white rounded-md hover:bg-bambu-green/90`,children:[(0,G.jsx)(Vs,{className:`w-4 h-4`}),n(`cameraTokens.created.copy`,`Copy`)]})]}),a&&(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white mb-1`,children:n(`cameraTokens.created.camWallUrlTitle`,`Cam Wall URL for this display`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:n(`cameraTokens.created.camWallUrlHint`,`Open this on the screen. Anyone who can read the URL can watch the wall, so treat it like a key — revoke the token to cut the display off.`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`code`,{className:`flex-1 px-3 py-2 bg-bambu-dark rounded-md text-bambu-green text-xs break-all font-mono select-all`,children:a}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>s(a),className:`flex items-center gap-2 px-3 py-2 bg-bambu-green text-white rounded-md hover:bg-bambu-green/90`,children:[(0,G.jsx)(Vs,{className:`w-4 h-4`}),n(`cameraTokens.created.copy`,`Copy`)]})]})]}),o&&(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white mb-1`,children:n(`cameraTokens.created.overlayUrlTitle`,`Overlay URL for OBS`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:n(`cameraTokens.created.overlayUrlHint`,`Add this as a Browser Source in OBS. Change the /overlay/1 number to your printer's number (from its URL on the Printers page). Anyone who can read the URL can watch the stream, so treat it like a key — revoke the token to cut it off.`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`code`,{className:`flex-1 px-3 py-2 bg-bambu-dark rounded-md text-bambu-green text-xs break-all font-mono select-all`,children:o}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>s(o),className:`flex items-center gap-2 px-3 py-2 bg-bambu-green text-white rounded-md hover:bg-bambu-green/90`,children:[(0,G.jsx)(Vs,{className:`w-4 h-4`}),n(`cameraTokens.created.copy`,`Copy`)]})]})]}),(0,G.jsx)(`div`,{className:`flex justify-end`,children:(0,G.jsx)(`button`,{type:`button`,onClick:t,className:`px-4 py-2 bg-bambu-dark-tertiary text-white rounded-md hover:bg-bambu-dark-tertiary/80`,children:n(`cameraTokens.created.dismiss`,`I've saved it`)})})]})})}function HUe({token:e,showOwner:t,ownerLabel:n,onRevoke:r}){let{t:i}=U(),a=RUe(e.expires_at);return(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary last:border-b-0`,children:[(0,G.jsx)(`td`,{className:`py-3 px-3 text-white`,children:e.name}),t&&(0,G.jsx)(`td`,{className:`py-3 px-3 text-bambu-gray`,children:n}),(0,G.jsx)(`td`,{className:`py-3 px-3`,children:(0,G.jsx)(`span`,{className:`rounded bg-bambu-dark-tertiary px-2 py-0.5 text-xs text-bambu-gray`,children:i(`cameraTokens.scope.${e.scope}`,e.scope)})}),(0,G.jsxs)(`td`,{className:`py-3 px-3 text-bambu-gray font-mono text-xs`,children:[e.lookup_prefix,`…`]}),(0,G.jsx)(`td`,{className:`py-3 px-3 text-bambu-gray`,children:W8(e.created_at)}),(0,G.jsxs)(`td`,{className:`py-3 px-3 ${a?`text-red-700 dark:text-red-400`:`text-bambu-gray`}`,children:[W8(e.expires_at),a&&(0,G.jsx)(`span`,{className:`ml-2 px-2 py-0.5 text-xs bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-300 rounded`,children:i(`cameraTokens.list.expired`,`Expired`)})]}),(0,G.jsx)(`td`,{className:`py-3 px-3 text-bambu-gray`,children:W8(e.last_used_at)}),(0,G.jsx)(`td`,{className:`py-3 px-3 text-right`,children:(0,G.jsxs)(`button`,{type:`button`,onClick:()=>r(e.id),className:`inline-flex items-center gap-1 px-2 py-1 text-sm text-red-700 dark:text-red-400 hover:text-red-900 dark:hover:text-red-300`,title:i(`cameraTokens.list.revoke`,`Revoke`),children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),i(`cameraTokens.list.revoke`,`Revoke`)]})})]})}function UUe({tokens:e,showOwner:t,userIdToName:n,onRevoke:r,emptyMessage:i}){let{t:a}=U();return e.length===0?(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic`,children:i}):(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{className:`text-bambu-gray text-left border-b border-bambu-dark-tertiary`,children:(0,G.jsxs)(`tr`,{children:[(0,G.jsx)(`th`,{className:`py-2 px-3 font-medium`,children:a(`cameraTokens.list.name`,`Name`)}),t&&(0,G.jsx)(`th`,{className:`py-2 px-3 font-medium`,children:a(`cameraTokens.list.owner`,`Owner`)}),(0,G.jsx)(`th`,{className:`py-2 px-3 font-medium`,children:a(`cameraTokens.list.scope`,`Scope`)}),(0,G.jsx)(`th`,{className:`py-2 px-3 font-medium`,children:a(`cameraTokens.list.prefix`,`Prefix`)}),(0,G.jsx)(`th`,{className:`py-2 px-3 font-medium`,children:a(`cameraTokens.list.created`,`Created`)}),(0,G.jsx)(`th`,{className:`py-2 px-3 font-medium`,children:a(`cameraTokens.list.expires`,`Expires`)}),(0,G.jsx)(`th`,{className:`py-2 px-3 font-medium`,children:a(`cameraTokens.list.lastUsed`,`Last used`)}),(0,G.jsx)(`th`,{className:`py-2 px-3`})]})}),(0,G.jsx)(`tbody`,{children:e.map(e=>(0,G.jsx)(HUe,{token:e,showOwner:t,ownerLabel:n?.get(e.user_id)??`#${e.user_id}`,onRevoke:r},e.id))})]})})}function WUe(){let{t:e}=U(),{user:t,isAdmin:n}=jd(),{showToast:r}=Gd(),[i,a]=(0,y.useState)([]),[o,s]=(0,y.useState)([]),[c,l]=(0,y.useState)(new Map),[u,d]=(0,y.useState)(!0),[f,p]=(0,y.useState)(null),[m,h]=(0,y.useState)(null),g=async()=>{d(!0);try{if(a(await Z.listMyLongLivedCameraTokens()),n){s(await Z.listAllLongLivedCameraTokens());try{let e=await Z.getUsersSlim();l(new Map(e.map(e=>[e.id,e.username])))}catch{l(new Map)}}}catch(t){r(t instanceof Error?t.message:e(`cameraTokens.toast.loadFailed`,`Failed to load tokens`),`error`)}finally{d(!1)}};(0,y.useEffect)(()=>{g()},[n]);let _=async e=>{let t=[...i,...o].find(t=>t.id===e);t&&h(t)},v=async()=>{if(!m)return;let t=m.id;h(null);try{await Z.revokeLongLivedCameraToken(t),r(e(`cameraTokens.toast.revoked`,`Token revoked`)),await g()}catch(t){r(t instanceof Error?t.message:e(`cameraTokens.toast.revokeFailed`,`Failed to revoke token`),`error`)}},b=(0,y.useMemo)(()=>o.filter(e=>e.user_id!==t?.id),[o,t?.id]);return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4`,children:e(`cameraTokens.description`,`Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Each token is camera-stream-only and can be revoked at any time.`)}),(0,G.jsx)(zUe,{onCreated:e=>{p(e),g()}}),(0,G.jsxs)(`div`,{className:`mb-6`,children:[(0,G.jsx)(`h3`,{className:`text-base font-semibold text-white mb-3`,children:e(`cameraTokens.list.myTitle`,`My tokens`)}),u?(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`cameraTokens.loading`,`Loading…`)}):(0,G.jsx)(UUe,{tokens:i,onRevoke:_,emptyMessage:e(`cameraTokens.list.empty`,`No tokens yet.`)})]}),n&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-base font-semibold text-white mb-3`,children:e(`cameraTokens.list.allTitle`,`All users (admin view)`)}),(0,G.jsx)(UUe,{tokens:b,showOwner:!0,userIdToName:c,onRevoke:_,emptyMessage:e(`cameraTokens.list.empty`,`No tokens yet.`)})]}),f&&(0,G.jsx)(VUe,{token:f,onClose:()=>p(null)}),m&&(0,G.jsx)(BUe,{token:m,onConfirm:()=>void v(),onCancel:()=>h(null)})]})}var GUe=[{key:`printer`,labelKey:`streamOverlay.builder.fieldPrinter`,fallback:`Printer name`},{key:`filename`,labelKey:`streamOverlay.builder.fieldFilename`,fallback:`File name`},{key:`status`,labelKey:`streamOverlay.builder.fieldStatus`,fallback:`Status`},{key:`progress`,labelKey:`streamOverlay.builder.fieldProgress`,fallback:`Progress bar`},{key:`layers`,labelKey:`streamOverlay.builder.fieldLayers`,fallback:`Layer count`},{key:`eta`,labelKey:`streamOverlay.builder.fieldEta`,fallback:`Time remaining and ETA`},{key:`nozzle`,labelKey:`printers.heaterHistory.nozzle`,fallback:`Nozzle`},{key:`bed`,labelKey:`printers.heaterHistory.bed`,fallback:`Bed`},{key:`chamber`,labelKey:`printers.heaterHistory.chamber`,fallback:`Chamber`}],KUe=[`progress`,`layers`,`eta`,`filename`,`status`],qUe=15;function JUe(){let{t:e}=U(),{showToast:t}=Gd(),[n,r]=(0,y.useState)([]),[i,a]=(0,y.useState)(null),[o,s]=(0,y.useState)(KUe),[c,l]=(0,y.useState)(`medium`),[u,d]=(0,y.useState)(qUe),[f,p]=(0,y.useState)(!0),[m,h]=(0,y.useState)(``),[g,_]=(0,y.useState)(!1);(0,y.useEffect)(()=>{let e=!1;return(async()=>{try{let t=await Z.getPrinters();if(e)return;r(t),t.length>0&&a(t[0].id)}catch{}})(),()=>{e=!0}},[]);let v=(0,y.useMemo)(()=>{let e=i??1,t=new URLSearchParams,n=GUe.filter(e=>o.includes(e.key)).map(e=>e.key);return t.set(`show`,n.join(`,`)),c!==`medium`&&t.set(`size`,c),u!==qUe&&t.set(`fps`,String(u)),f||t.set(`camera`,`false`),m.trim()&&t.set(`token`,m.trim()),`${window.location.origin}/overlay/${e}?${t.toString()}`},[i,o,c,u,f,m]),b=e=>{s(t=>t.includes(e)?t.filter(t=>t!==e):[...t,e])},x=async()=>{try{if(navigator.clipboard&&window.isSecureContext)await navigator.clipboard.writeText(v);else{let e=document.createElement(`textarea`);e.value=v,e.style.position=`fixed`,e.style.opacity=`0`,document.body.appendChild(e);try{e.select(),document.execCommand(`copy`)}finally{document.body.removeChild(e)}}t(e(`cameraTokens.toast.copied`,`Copied to clipboard`))}catch{t(e(`cameraTokens.toast.copyFailed`,`Copy failed — select and copy manually`),`error`)}};return(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4`,children:e(`streamOverlay.builder.description`,`Build the URL for a streaming overlay — a full-screen camera view with live print data drawn over it, for OBS, a wall display, or any browser source. Pick the fields you want and copy the URL.`)}),(0,G.jsxs)(`div`,{className:`grid gap-4 md:grid-cols-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`overlay-builder-printer`,className:`block text-sm font-medium text-white mb-1`,children:e(`streamOverlay.builder.printer`,`Printer`)}),(0,G.jsxs)(`select`,{id:`overlay-builder-printer`,value:i??``,onChange:e=>a(Number(e.target.value)),className:`w-full px-3 py-2 bg-bambu-dark rounded-md text-white border border-bambu-dark-tertiary focus:border-bambu-green focus:outline-none`,children:[n.length===0&&(0,G.jsx)(`option`,{value:``,children:e(`common.loading`,`Loading…`)}),n.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`overlay-builder-size`,className:`block text-sm font-medium text-white mb-1`,children:e(`streamOverlay.builder.size`,`Text size`)}),(0,G.jsxs)(`select`,{id:`overlay-builder-size`,value:c,onChange:e=>l(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark rounded-md text-white border border-bambu-dark-tertiary focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`small`,children:e(`streamOverlay.builder.sizeSmall`,`Small`)}),(0,G.jsx)(`option`,{value:`medium`,children:e(`streamOverlay.builder.sizeMedium`,`Medium`)}),(0,G.jsx)(`option`,{value:`large`,children:e(`streamOverlay.builder.sizeLarge`,`Large`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`overlay-builder-fps`,className:`block text-sm font-medium text-white mb-1`,children:e(`streamOverlay.builder.fps`,`Frame rate`)}),(0,G.jsx)(`input`,{id:`overlay-builder-fps`,type:`number`,min:1,max:30,value:u,onChange:e=>d(Math.min(Math.max(Number(e.target.value)||1,1),30)),className:`w-full px-3 py-2 bg-bambu-dark rounded-md text-white border border-bambu-dark-tertiary focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`streamOverlay.builder.fpsHint`,`A1 and P1 cameras top out around 5 fps whatever you ask for.`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`overlay-builder-token`,className:`block text-sm font-medium text-white mb-1`,children:e(`streamOverlay.builder.token`,`Streaming Overlay token (optional)`)}),(0,G.jsx)(`input`,{id:`overlay-builder-token`,type:`text`,value:m,onChange:e=>h(e.target.value),placeholder:`bblt_…`,className:`w-full px-3 py-2 bg-bambu-dark rounded-md text-white border border-bambu-dark-tertiary focus:border-bambu-green focus:outline-none font-mono text-xs`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`streamOverlay.builder.tokenHint`,`Only needed when login is enabled: OBS has no session of its own. Create one above with the Streaming Overlay scope.`)})]})]}),(0,G.jsxs)(`fieldset`,{className:`mt-4`,children:[(0,G.jsx)(`legend`,{className:`text-sm font-medium text-white mb-2`,children:e(`streamOverlay.builder.fields`,`Fields to show`)}),(0,G.jsxs)(`div`,{className:`grid gap-2 sm:grid-cols-2 md:grid-cols-3`,children:[GUe.map(t=>(0,G.jsxs)(`label`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:o.includes(t.key),onChange:()=>b(t.key),className:`accent-bambu-green`}),e(t.labelKey,t.fallback)]},t.key)),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:f,onChange:e=>p(e.target.checked),className:`accent-bambu-green`}),e(`streamOverlay.builder.fieldCamera`,`Camera feed`)]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-2`,children:e(`streamOverlay.builder.chamberHint`,`Chamber temperature only appears on models with a real chamber sensor — P1 and A1 printers report a meaningless value, so it is left out there.`)})]}),(0,G.jsxs)(`div`,{className:`mt-4`,children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white mb-1`,children:e(`streamOverlay.builder.urlTitle`,`Overlay URL`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`code`,{className:`flex-1 px-3 py-2 bg-bambu-dark rounded-md text-bambu-green text-xs break-all font-mono select-all`,children:v}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>void x(),className:`flex items-center gap-2 px-3 py-2 bg-bambu-green text-white rounded-md hover:bg-bambu-green/90`,children:[(0,G.jsx)(Vs,{className:`w-4 h-4`}),e(`cameraTokens.created.copy`,`Copy`)]}),(0,G.jsxs)(`a`,{href:v,target:`_blank`,rel:`noopener noreferrer`,className:`flex items-center gap-2 px-3 py-2 bg-bambu-dark-tertiary text-white rounded-md hover:bg-bambu-dark-tertiary/80`,children:[(0,G.jsx)(nc,{className:`w-4 h-4`}),e(`streamOverlay.builder.open`,`Open`)]})]}),m.trim()&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-2`,children:e(`streamOverlay.builder.tokenWarning`,`This URL contains a token — anyone who can read it can watch the stream and see the file name. Revoke the token to cut it off.`)})]}),(0,G.jsxs)(`div`,{className:`mt-4`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>_(e=>!e),className:`flex items-center gap-2 px-3 py-2 bg-bambu-dark-tertiary text-white rounded-md hover:bg-bambu-dark-tertiary/80 text-sm`,children:[g?(0,G.jsx)(rc,{className:`w-4 h-4`}):(0,G.jsx)(ic,{className:`w-4 h-4`}),g?e(`streamOverlay.builder.hidePreview`,`Hide preview`):e(`streamOverlay.builder.showPreview`,`Show preview`)]}),g&&(0,G.jsx)(`iframe`,{src:v,title:e(`streamOverlay.builder.previewTitle`,`Overlay preview`),className:`mt-3 w-full aspect-video rounded-md border border-bambu-dark-tertiary bg-black`},v)]})]})}function YUe({plug:e,onEdit:t}){let{t:n}=U(),r=co(),{showToast:i}=Gd(),[a,o]=(0,y.useState)(!1),[s,c]=(0,y.useState)(!1),[l,u]=(0,y.useState)(!1),[d,f]=(0,y.useState)(!1),{data:p,isLoading:m}=K({queryKey:[`smart-plug-status`,e.id],queryFn:()=>Z.getSmartPlugStatus(e.id),refetchInterval:3e4}),{data:h}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),g=h?.find(t=>t.id===e.printer_id),_=q({mutationFn:t=>Z.controlSmartPlug(e.id,t),onMutate:async t=>{await r.cancelQueries({queryKey:[`smart-plug-status`,e.id]});let n=r.getQueryData([`smart-plug-status`,e.id]),i=t===`on`?`ON`:t===`off`||p?.state===`ON`?`OFF`:`ON`;return r.setQueryData([`smart-plug-status`,e.id],e=>({...e,state:i})),{previousStatus:n}},onError:(t,a,o)=>{o?.previousStatus&&r.setQueryData([`smart-plug-status`,e.id],o.previousStatus),i(n(`smartPlugs.failedToTurn`,{action:a,name:e.name}),`error`)},onSettled:()=>{setTimeout(()=>{r.invalidateQueries({queryKey:[`smart-plug-status`,e.id]}),r.invalidateQueries({queryKey:[`smart-plugs`]})},1e3)}}),v=q({mutationFn:t=>Z.updateSmartPlug(e.id,t),onSuccess:()=>{r.invalidateQueries({queryKey:[`smart-plugs`]}),e.printer_id&&(r.invalidateQueries({queryKey:[`smartPlugByPrinter`,e.printer_id]}),r.invalidateQueries({queryKey:[`scriptPlugsByPrinter`,e.printer_id]}))}}),b=q({mutationFn:()=>Z.deleteSmartPlug(e.id),onSuccess:()=>{r.invalidateQueries({queryKey:[`smart-plugs`]}),e.printer_id&&r.invalidateQueries({queryKey:[`scriptPlugsByPrinter`,e.printer_id]})}}),x=p?.state===`ON`,S=e.plug_type===`mqtt`&&p?.energy?.power!==null&&p?.energy?.power!==void 0,C=(p?.reachable??!1)||S,w=_.isPending,T=(()=>{if(e.plug_type!==`tasmota`||!e.ip_address)return null;let t=e.ip_address;return e.username&&e.password?`http://${encodeURIComponent(e.username)}:${encodeURIComponent(e.password)}@${t}/`:`http://${t}/`})();return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ld,{className:`relative`,children:(0,G.jsxs)(zd,{className:`p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-2 mb-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 min-w-0 flex-1`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg flex-shrink-0 ${e.plug_type===`mqtt`?C?`bg-teal-100 dark:bg-teal-500/20`:`bg-red-100 dark:bg-red-500/20`:C?x?`bg-bambu-green/20`:`bg-bambu-dark`:`bg-red-100 dark:bg-red-500/20`}`,children:e.plug_type===`mqtt`?(0,G.jsx)(zl,{className:`w-5 h-5 ${C?`text-teal-600 dark:text-teal-400`:`text-red-600 dark:text-red-400`}`}):e.plug_type===`homeassistant`?(0,G.jsx)(zc,{className:`w-5 h-5 ${C?x?`text-bambu-green`:`text-bambu-gray`:`text-red-600 dark:text-red-400`}`}):e.plug_type===`rest`?(0,G.jsx)(kc,{className:`w-5 h-5 ${C?x?`text-bambu-green`:`text-bambu-gray`:`text-red-600 dark:text-red-400`}`}):(0,G.jsx)(Nl,{className:`w-5 h-5 ${C?x?`text-bambu-green`:`text-bambu-gray`:`text-red-600 dark:text-red-400`}`})}),(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`h3`,{className:`font-medium text-white truncate`,children:e.name}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray truncate`,title:e.plug_type===`mqtt`?e.mqtt_topic??void 0:e.plug_type===`homeassistant`?e.ha_entity_id??void 0:e.plug_type===`rest`?e.rest_on_url??e.rest_off_url??void 0:e.ip_address??void 0,children:e.plug_type===`mqtt`?e.mqtt_topic:e.plug_type===`homeassistant`?e.ha_entity_id:e.plug_type===`rest`?e.rest_on_url||e.rest_off_url:e.ip_address})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-col items-end gap-1 flex-shrink-0`,children:[m?(0,G.jsx)(Y,{className:`w-4 h-4 text-bambu-gray animate-spin`}):e.plug_type===`mqtt`?(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-sm whitespace-nowrap`,children:[(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-teal-100 dark:bg-teal-500/20 text-teal-700 dark:text-teal-400 text-[10px] font-medium rounded flex-shrink-0`,children:`MQTT`}),C&&(0,G.jsx)(`span`,{className:`text-status-ok`,children:`✓`})]}):e.plug_type===`homeassistant`?(0,G.jsxs)(`div`,{className:`flex items-center gap-1 text-sm`,children:[(0,G.jsx)(`span`,{className:`px-1 py-0.5 bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400 text-[10px] font-medium rounded`,children:`HA`}),(0,G.jsx)(`span`,{className:C?x?`text-status-ok`:`text-bambu-gray`:`text-status-error`,children:C?p?.state||`?`:n(`smartPlugs.offline`)})]}):e.plug_type===`rest`?(0,G.jsxs)(`div`,{className:`flex items-center gap-1 text-sm`,children:[(0,G.jsx)(`span`,{className:`px-1 py-0.5 bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-400 text-[10px] font-medium rounded`,children:`REST`}),(0,G.jsx)(`span`,{className:C?x?`text-status-ok`:`text-bambu-gray`:`text-status-error`,children:C?p?.state||`?`:n(`smartPlugs.offline`)})]}):C?(0,G.jsxs)(`div`,{className:`flex items-center gap-1 text-sm`,children:[(0,G.jsx)(Zu,{className:`w-4 h-4 text-status-ok`}),(0,G.jsx)(`span`,{className:x?`text-status-ok`:`text-bambu-gray`,children:p?.state||n(`smartPlugs.unknown`)})]}):(0,G.jsxs)(`div`,{className:`flex items-center gap-1 text-sm text-status-error`,children:[(0,G.jsx)(Xu,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:n(`smartPlugs.offline`)})]}),T&&(0,G.jsxs)(`a`,{href:T,target:`_blank`,rel:`noopener noreferrer`,className:`flex items-center gap-1 px-2 py-0.5 bg-bambu-dark hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white text-xs rounded-full transition-colors`,title:n(`smartPlugs.openPlugAdminPage`),children:[(0,G.jsx)(nc,{className:`w-3 h-3`}),n(`smartPlugs.admin`)]})]})]}),g&&(0,G.jsxs)(`div`,{className:`mb-3 px-2 py-1.5 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[n(`smartPlugs.linkedTo`),` `]}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:g.name})]}),(e.power_alert_enabled||e.schedule_enabled||e.plug_type===`mqtt`)&&(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-1.5 mb-3`,children:[e.plug_type===`mqtt`&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 px-2 py-0.5 bg-teal-100 dark:bg-teal-500/20 text-teal-700 dark:text-teal-400 text-xs rounded-full`,children:[(0,G.jsx)(ic,{className:`w-3 h-3`}),n(`smartPlugs.monitorOnly`)]}),e.power_alert_enabled&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 px-2 py-0.5 bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400 text-xs rounded-full`,children:[(0,G.jsx)(qo,{className:`w-3 h-3`}),n(`smartPlugs.alerts`)]}),e.schedule_enabled&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 px-2 py-0.5 bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400 text-xs rounded-full`,children:[(0,G.jsx)(as,{className:`w-3 h-3`}),e.schedule_on_time&&e.schedule_off_time?`${e.schedule_on_time} - ${e.schedule_off_time}`:e.schedule_on_time?n(`smartPlugs.scheduleOn`,{time:e.schedule_on_time}):n(`smartPlugs.scheduleOff`,{time:e.schedule_off_time})]})]}),e.plug_type!==`mqtt`&&(0,G.jsxs)(`div`,{className:`flex gap-2 mb-3`,children:[(0,G.jsxs)(Q,{size:`sm`,variant:x?`primary`:`secondary`,disabled:!C||w,onClick:()=>c(!0),className:`flex-1`,children:[w?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Il,{className:`w-4 h-4`}),n(`smartPlugs.on`)]}),(0,G.jsxs)(Q,{size:`sm`,variant:x?`secondary`:`primary`,disabled:!C||w,onClick:()=>u(!0),className:`flex-1`,children:[w?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Fl,{className:`w-4 h-4`}),n(`smartPlugs.off`)]})]}),e.plug_type===`mqtt`&&p?.energy&&(0,G.jsxs)(`div`,{className:`flex gap-2 mb-3 px-3 py-2 bg-bambu-dark rounded-lg`,children:[p.energy.power!==null&&p.energy.power!==void 0&&(0,G.jsxs)(`div`,{className:`flex-1 text-center`,children:[(0,G.jsxs)(`p`,{className:`text-lg font-semibold text-white`,children:[Math.round(p.energy.power),`W`]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.power`)})]}),p.energy.today!==null&&p.energy.today!==void 0&&(0,G.jsxs)(`div`,{className:`flex-1 text-center border-l border-bambu-dark-tertiary`,children:[(0,G.jsx)(`p`,{className:`text-lg font-semibold text-white`,children:p.energy.today.toFixed(3)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.kwhToday`)})]})]}),(0,G.jsxs)(`button`,{onClick:()=>f(!d),className:`w-full flex items-center justify-between py-2 text-sm text-bambu-gray hover:text-white transition-colors`,children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(tu,{className:`w-4 h-4`}),e.plug_type===`mqtt`?n(`smartPlugs.settings`):n(`smartPlugs.automationSettings`)]}),(0,G.jsx)(`span`,{children:d?`-`:`+`})]}),d&&(0,G.jsxs)(`div`,{className:`pt-3 border-t border-bambu-dark-tertiary space-y-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Jc,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`smartPlugs.showInSwitchbar`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.quickAccessSidebar`)})]})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:e.show_in_switchbar,onChange:e=>v.mutate({show_in_switchbar:e.target.checked}),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-9 h-5 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-4 after:w-4 after:transition-all peer-checked:bg-bambu-green`})]})]}),e.printer_id!=null&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Il,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`smartPlugs.controlsPrinterPower`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.controlsPrinterPowerDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:e.controls_printer_power,onChange:e=>v.mutate({controls_printer_power:e.target.checked}),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-9 h-5 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-4 after:w-4 after:transition-all peer-checked:bg-bambu-green`})]})]}),e.plug_type!==`mqtt`&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`smartPlugs.enabled`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.enableAutomation`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:e.enabled,onChange:e=>v.mutate({enabled:e.target.checked}),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-9 h-5 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-4 after:w-4 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`smartPlugs.autoOn`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.autoOnDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:e.auto_on,onChange:e=>v.mutate({auto_on:e.target.checked}),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-9 h-5 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-4 after:w-4 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`smartPlugs.autoOff`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.autoOffDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:e.auto_off,onChange:e=>v.mutate({auto_off:e.target.checked}),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-9 h-5 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-4 after:w-4 after:transition-all peer-checked:bg-bambu-green`})]})]}),e.auto_off&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between pl-4 border-l-2 border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`smartPlugs.autoOffPersistent`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.autoOffPersistentDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:e.auto_off_persistent,onChange:e=>v.mutate({auto_off_persistent:e.target.checked}),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-9 h-5 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-4 after:w-4 after:transition-all peer-checked:bg-bambu-green`})]})]}),e.auto_off&&(0,G.jsxs)(`div`,{className:`space-y-3 pl-4 border-l-2 border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white mb-2`,children:n(`smartPlugs.turnOffDelayMode`)}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(`button`,{onClick:()=>v.mutate({off_delay_mode:`time`}),className:`flex-1 flex items-center justify-center gap-2 px-3 py-2 rounded-lg text-sm transition-colors ${e.off_delay_mode===`time`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(js,{className:`w-4 h-4`}),n(`smartPlugs.time`)]}),(0,G.jsxs)(`button`,{onClick:()=>v.mutate({off_delay_mode:`temperature`}),className:`flex-1 flex items-center justify-center gap-2 px-3 py-2 rounded-lg text-sm transition-colors ${e.off_delay_mode===`temperature`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(ju,{className:`w-4 h-4`}),n(`smartPlugs.temp`)]})]})]}),e.off_delay_mode===`time`?(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:n(`smartPlugs.delayMinutes`)}),(0,G.jsx)(`input`,{type:`number`,min:`1`,max:`60`,value:e.off_delay_minutes,onChange:e=>v.mutate({off_delay_minutes:parseInt(e.target.value)||5}),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`})]}):(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:n(`smartPlugs.tempThreshold`)}),(0,G.jsx)(`input`,{type:`number`,min:`30`,max:`100`,value:e.off_temp_threshold,onChange:e=>v.mutate({off_temp_threshold:parseInt(e.target.value)||70}),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(`smartPlugs.tempThresholdDescription`)})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`smartPlugs.autoOffAfterDrying`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.autoOffAfterDryingDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:e.auto_off_after_drying,onChange:e=>v.mutate({auto_off_after_drying:e.target.checked}),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-9 h-5 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-4 after:w-4 after:transition-all peer-checked:bg-bambu-green`})]})]}),e.auto_off_after_drying&&(0,G.jsxs)(`div`,{className:`pl-4 border-l-2 border-bambu-dark-tertiary`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:n(`smartPlugs.delayAfterDryingMinutes`)}),(0,G.jsx)(`input`,{type:`number`,min:`0`,max:`120`,value:e.off_delay_after_drying_minutes,onChange:e=>v.mutate({off_delay_after_drying_minutes:parseInt(e.target.value)||10}),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 pt-2`,children:[(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>t(e),className:`flex-1`,children:[(0,G.jsx)(Ol,{className:`w-4 h-4`}),n(`smartPlugs.edit`)]}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>o(!0),className:`text-red-600 dark:text-red-400 hover:text-red-700 dark:hover:text-red-300`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})]})]})}),a&&(0,G.jsx)(rf,{title:n(`smartPlugs.deleteSmartPlug`),message:n(`smartPlugs.deleteConfirm`,{name:e.name}),confirmText:n(`smartPlugs.delete`),variant:`danger`,onConfirm:()=>{b.mutate(),o(!1)},onCancel:()=>o(!1)}),s&&(0,G.jsx)(rf,{title:n(`smartPlugs.turnOnSmartPlug`),message:n(`smartPlugs.turnOnConfirm`,{name:e.name}),confirmText:n(`smartPlugs.turnOn`),variant:`default`,onConfirm:()=>{_.mutate(`on`),c(!1)},onCancel:()=>c(!1)}),l&&(0,G.jsx)(rf,{title:n(`smartPlugs.turnOffSmartPlug`),message:n(`smartPlugs.turnOffConfirm`,{name:e.name}),confirmText:n(`smartPlugs.turnOff`),variant:`danger`,onConfirm:()=>{_.mutate(`off`),u(!1)},onCancel:()=>u(!1)})]})}function XUe({plug:e,onClose:t}){let{t:n}=U(),r=co(),i=!!e,[a,o]=(0,y.useState)(e?.plug_type||`tasmota`),[s,c]=(0,y.useState)(e?.name||``),[l,u]=(0,y.useState)(e?.ip_address||``),[d,f]=(0,y.useState)(e?.username||``),[p,m]=(0,y.useState)(e?.password||``),[h,g]=(0,y.useState)(e?.ha_entity_id||``),[_,v]=(0,y.useState)(e?.mqtt_power_topic||e?.mqtt_topic||``),[b,x]=(0,y.useState)(e?.mqtt_power_path||``),[S,C]=(0,y.useState)((e?.mqtt_power_multiplier??e?.mqtt_multiplier??1).toString()),[w,T]=(0,y.useState)(e?.mqtt_energy_topic||``),[E,D]=(0,y.useState)(e?.mqtt_energy_path||``),[O,k]=(0,y.useState)((e?.mqtt_energy_multiplier??1).toString()),[A,j]=(0,y.useState)(e?.mqtt_state_topic||``),[M,N]=(0,y.useState)(e?.mqtt_state_path||``),[P,F]=(0,y.useState)(e?.mqtt_state_on_value||``),[I,L]=(0,y.useState)(e?.rest_on_url||``),[R,z]=(0,y.useState)(e?.rest_on_body||``),[B,V]=(0,y.useState)(e?.rest_off_url||``),[ee,te]=(0,y.useState)(e?.rest_off_body||``),[ne,re]=(0,y.useState)(e?.rest_method||`POST`),[ie,ae]=(0,y.useState)(e?.rest_headers||``),[oe,se]=(0,y.useState)(e?.rest_status_url||``),[H,ce]=(0,y.useState)(e?.rest_status_path||``),[le,ue]=(0,y.useState)(e?.rest_status_on_value||``),[de,fe]=(0,y.useState)(e?.rest_power_url||``),[pe,me]=(0,y.useState)(e?.rest_power_path||``),[he,ge]=(0,y.useState)((e?.rest_power_multiplier??1).toString()),[_e,ve]=(0,y.useState)(e?.rest_energy_url||``),[ye,be]=(0,y.useState)(e?.rest_energy_path||``),[xe,Se]=(0,y.useState)((e?.rest_energy_multiplier??1).toString()),[Ce,we]=(0,y.useState)(e?.rest_energy_total_path||``),[Te,Ee]=(0,y.useState)((e?.rest_energy_total_multiplier??1).toString()),[De,Oe]=(0,y.useState)(e?.ha_power_entity||``),[ke,Ae]=(0,y.useState)(e?.ha_energy_today_entity||``),[je,Me]=(0,y.useState)(e?.ha_energy_total_entity||``),[Ne,Pe]=(0,y.useState)(``),[Fe,Ie]=(0,y.useState)(``),[Le,Re]=(0,y.useState)(!1),ze=(0,y.useRef)(null),[Be,Ve]=(0,y.useState)(``),[He,Ue]=(0,y.useState)(!1),We=(0,y.useRef)(null),[Ge,Ke]=(0,y.useState)(``),[qe,Je]=(0,y.useState)(!1),Ye=(0,y.useRef)(null),[Xe,Ze]=(0,y.useState)(``),[Qe,$e]=(0,y.useState)(!1),et=(0,y.useRef)(null),[tt,nt]=(0,y.useState)(e?.printer_id||null),[rt,it]=(0,y.useState)(e?.controls_printer_power??!0),[at,ot]=(0,y.useState)(null),[st,ct]=(0,y.useState)(null),[lt,ut]=(0,y.useState)(e?.power_alert_enabled||!1),[dt,ft]=(0,y.useState)(e?.power_alert_high?.toString()||``),[pt,mt]=(0,y.useState)(e?.power_alert_low?.toString()||``),[ht,gt]=(0,y.useState)(e?.schedule_enabled||!1),[_t,vt]=(0,y.useState)(e?.schedule_on_time||``),[yt,bt]=(0,y.useState)(e?.schedule_off_time||``),[xt,St]=(0,y.useState)(e?.show_in_switchbar||!1),[Ct,wt]=(0,y.useState)(e?.show_on_printer_card??!0),[Tt,Et]=(0,y.useState)(!1),[Dt,Ot]=(0,y.useState)({scanned:0,total:0}),[kt,At]=(0,y.useState)([]),jt=(0,y.useRef)(null),{data:Mt}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:Nt}=K({queryKey:[`smart-plugs`],queryFn:Z.getSmartPlugs}),{data:Pt}=K({queryKey:[`settings`],queryFn:Z.getSettings}),Ft=!!(Pt?.ha_enabled&&Pt?.ha_url&&Pt?.ha_token);(0,y.useEffect)(()=>{let e=setTimeout(()=>{Ie(Ne)},300);return()=>clearTimeout(e)},[Ne]),(0,y.useEffect)(()=>{let e=e=>{ze.current&&!ze.current.contains(e.target)&&Re(!1),We.current&&!We.current.contains(e.target)&&Ue(!1),Ye.current&&!Ye.current.contains(e.target)&&Je(!1),et.current&&!et.current.contains(e.target)&&$e(!1)};return document.addEventListener(`mousedown`,e),()=>document.removeEventListener(`mousedown`,e)},[]);let{data:It,isLoading:Lt,error:Rt}=K({queryKey:[`ha-entities`,Fe],queryFn:()=>Z.getHAEntities(Fe||void 0),enabled:a===`homeassistant`&&Ft,retry:!1,staleTime:0}),{data:zt}=K({queryKey:[`ha-sensor-entities`],queryFn:Z.getHASensorEntities,enabled:a===`homeassistant`&&Ft,retry:!1,staleTime:0});(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&t()};return window.addEventListener(`keydown`,e),()=>{window.removeEventListener(`keydown`,e),jt.current&&clearInterval(jt.current)}},[t]);let Bt=async()=>{Et(!0),At([]),Ot({scanned:0,total:0}),ct(null);try{await Z.startTasmotaScan();let e=async()=>{try{let e=await Z.getTasmotaScanStatus();Ot({scanned:e.scanned,total:e.total}),At(await Z.getDiscoveredTasmotaDevices()),e.running||(Et(!1),jt.current&&=(clearInterval(jt.current),null))}catch(e){console.error(`Polling error:`,e)}};await e(),jt.current=setInterval(e,500)}catch(e){Et(!1),ct((e instanceof Error?e.message:typeof e==`string`?e:JSON.stringify(e))||n(`smartPlugs.failedToStartScan`))}},Vt=async()=>{try{await Z.stopTasmotaScan()}catch{}Et(!1),jt.current&&=(clearInterval(jt.current),null)},Ht=e=>{u(e.ip_address),c(e.name),ot(null)},Ut=q({mutationFn:()=>Z.testSmartPlugConnection(l,d||null,p||null),onSuccess:e=>{ot(e),ct(null),!s&&e.device_name&&c(e.device_name)},onError:e=>{ot(null),ct(e.message)}}),Wt=q({mutationFn:e=>Z.createSmartPlug(e),onSuccess:()=>{r.invalidateQueries({queryKey:[`smart-plugs`]}),r.invalidateQueries({queryKey:[`scriptPlugsByPrinter`]}),t()},onError:e=>{ct(e.message)}}),Gt=q({mutationFn:t=>Z.updateSmartPlug(e.id,t),onSuccess:()=>{r.invalidateQueries({queryKey:[`smart-plugs`]}),r.invalidateQueries({queryKey:[`scriptPlugsByPrinter`]}),t()},onError:e=>{ct(e.message)}}),Kt=Mt?.filter(t=>a===`tasmota`?!Nt?.some(n=>n.printer_id===t.id&&n.id!==e?.id&&n.plug_type===`tasmota`):!0),qt=e=>{if(e.preventDefault(),ct(null),!s.trim()){ct(n(`smartPlugs.nameRequired`));return}if(a===`tasmota`&&!l.trim()){ct(`IP address is required for Tasmota plugs`);return}if(a===`homeassistant`&&!h){ct(n(`smartPlugs.entityRequired`));return}if(a===`mqtt`){let e=_.trim(),t=w.trim(),r=A.trim();if(!e&&!t&&!r){ct(n(`smartPlugs.mqttTopicRequired`));return}}if(a===`rest`&&!I.trim()&&!B.trim()){ct(n(`smartPlugs.restUrlRequired`));return}let t={name:s.trim(),plug_type:a,ip_address:a===`tasmota`?l.trim():null,ha_entity_id:a===`homeassistant`?h:null,ha_power_entity:a===`homeassistant`&&De||null,ha_energy_today_entity:a===`homeassistant`&&ke||null,ha_energy_total_entity:a===`homeassistant`&&je||null,mqtt_power_topic:a===`mqtt`&&_.trim()||null,mqtt_power_path:a===`mqtt`&&b.trim()||null,mqtt_power_multiplier:a===`mqtt`&&parseFloat(S)||1,mqtt_energy_topic:a===`mqtt`&&w.trim()||null,mqtt_energy_path:a===`mqtt`&&E.trim()||null,mqtt_energy_multiplier:a===`mqtt`&&parseFloat(O)||1,mqtt_state_topic:a===`mqtt`&&A.trim()||null,mqtt_state_path:a===`mqtt`&&M.trim()||null,mqtt_state_on_value:a===`mqtt`&&P.trim()||null,rest_on_url:a===`rest`&&I.trim()||null,rest_on_body:a===`rest`&&R.trim()||null,rest_off_url:a===`rest`&&B.trim()||null,rest_off_body:a===`rest`&&ee.trim()||null,rest_method:a===`rest`?ne:null,rest_headers:a===`rest`&&ie.trim()||null,rest_status_url:a===`rest`&&oe.trim()||null,rest_status_path:a===`rest`&&H.trim()||null,rest_status_on_value:a===`rest`&&le.trim()||null,rest_power_url:a===`rest`&&de.trim()||null,rest_power_path:a===`rest`&&pe.trim()||null,rest_power_multiplier:a===`rest`&&parseFloat(he)||1,rest_energy_url:a===`rest`&&_e.trim()||null,rest_energy_path:a===`rest`&&ye.trim()||null,rest_energy_multiplier:a===`rest`&&parseFloat(xe)||1,rest_energy_total_path:a===`rest`&&Ce.trim()||null,rest_energy_total_multiplier:a===`rest`&&parseFloat(Te)||1,username:a===`tasmota`&&d.trim()||null,password:a===`tasmota`&&p.trim()||null,printer_id:tt,controls_printer_power:rt,power_alert_enabled:lt,power_alert_high:dt?parseFloat(dt):null,power_alert_low:pt?parseFloat(pt):null,schedule_enabled:ht,schedule_on_time:_t||null,schedule_off_time:yt||null,show_in_switchbar:xt,show_on_printer_card:Ct};i?Gt.mutate(t):Wt.mutate(t)},Jt=Wt.isPending||Gt.isPending;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:t,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-md max-h-[90vh] flex flex-col`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary flex-shrink-0`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:n(i?`smartPlugs.editTitle`:`smartPlugs.addTitle`)}),(0,G.jsx)(`button`,{onClick:t,className:`text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`form`,{onSubmit:qt,className:`p-6 space-y-4 overflow-y-auto`,children:[st&&(0,G.jsx)(`div`,{className:`p-3 bg-red-100 dark:bg-red-500/20 border border-red-400 dark:border-red-500/50 rounded-lg text-sm text-red-700 dark:text-red-400`,children:st}),!i&&(0,G.jsxs)(`div`,{className:`flex gap-2 mb-2`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{o(`tasmota`),ot(null),ct(null)},className:`flex-1 flex items-center justify-center gap-2 px-3 py-2.5 rounded-lg font-medium transition-colors ${a===`tasmota`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white border border-bambu-dark-tertiary`}`,children:[(0,G.jsx)(Nl,{className:`w-4 h-4`}),`Tasmota`]}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{o(`homeassistant`),ot(null),ct(null)},className:`flex-1 flex items-center justify-center gap-2 px-3 py-2.5 rounded-lg font-medium transition-colors ${a===`homeassistant`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white border border-bambu-dark-tertiary`}`,children:[(0,G.jsx)(zc,{className:`w-4 h-4`}),`HA`]}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{o(`mqtt`),ot(null),ct(null)},className:`flex-1 flex items-center justify-center gap-2 px-3 py-2.5 rounded-lg font-medium transition-colors ${a===`mqtt`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white border border-bambu-dark-tertiary`}`,children:[(0,G.jsx)(zl,{className:`w-4 h-4`}),`MQTT`]}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{o(`rest`),ot(null),ct(null)},className:`flex-1 flex items-center justify-center gap-2 px-3 py-2.5 rounded-lg font-medium transition-colors ${a===`rest`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white border border-bambu-dark-tertiary`}`,children:[(0,G.jsx)(kc,{className:`w-4 h-4`}),`REST`]})]}),!i&&a===`tasmota`&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[Tt?(0,G.jsxs)(Q,{type:`button`,variant:`secondary`,onClick:Vt,className:`w-full`,children:[(0,G.jsx)(td,{className:`w-4 h-4`}),n(`smartPlugs.stopScanning`)]}):(0,G.jsxs)(Q,{type:`button`,variant:`primary`,onClick:Bt,className:`w-full`,children:[(0,G.jsx)(Zl,{className:`w-4 h-4`}),n(`smartPlugs.discoverTasmota`)]}),Tt&&Dt.total>0&&(0,G.jsxs)(`div`,{className:`space-y-1`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between text-xs text-bambu-gray`,children:[(0,G.jsx)(`span`,{children:n(`smartPlugs.addSmartPlug.scanningNetwork`)}),(0,G.jsxs)(`span`,{children:[Dt.scanned,` / `,Dt.total]})]}),(0,G.jsx)(`div`,{className:`w-full bg-bambu-dark-tertiary rounded-full h-2`,children:(0,G.jsx)(`div`,{className:`bg-bambu-green h-2 rounded-full transition-all duration-300`,style:{width:`${Dt.scanned/Dt.total*100}%`}})})]}),kt.length>0&&(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.foundDevices`,{count:kt.length})}),(0,G.jsx)(`div`,{className:`max-h-40 overflow-y-auto space-y-1`,children:kt.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>Ht(e),className:`w-full flex items-center justify-between p-2 bg-bambu-dark hover:bg-bambu-dark-tertiary rounded-lg transition-colors text-left border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Nl,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:e.name}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:e.ip_address})]})]}),e.state&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-xs ${e.state===`ON`?`text-bambu-green`:`text-bambu-gray`}`,children:[(0,G.jsx)(Il,{className:`w-3 h-3`}),e.state]})]},e.ip_address))})]}),!Tt&&kt.length===0&&Dt.total>0&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray text-center py-2`,children:n(`smartPlugs.noDevicesFound`)})]}),a===`homeassistant`&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[!Ft&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`p-3 bg-yellow-100 dark:bg-yellow-500/20 border border-yellow-400 dark:border-yellow-500/50 rounded-lg text-sm text-yellow-700 dark:text-yellow-400`,children:[n(`smartPlugs.haNotConfigured`),` `,(0,G.jsx)(`span`,{className:`font-medium`,children:n(`smartPlugs.haSettingsPath`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1 opacity-50`,children:n(`smartPlugs.selectEntity`)}),(0,G.jsx)(`select`,{disabled:!0,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray cursor-not-allowed opacity-50`,children:(0,G.jsx)(`option`,{children:n(`smartPlugs.addSmartPlug.chooseEntity`)})})]})]}),Ft&&(0,G.jsxs)(G.Fragment,{children:[Lt&&(0,G.jsxs)(`div`,{className:`flex items-center justify-center py-4 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-5 h-5 animate-spin mr-2`}),n(`smartPlugs.loadingEntities`)]}),Rt&&(0,G.jsx)(`div`,{className:`p-3 bg-red-100 dark:bg-red-500/20 border border-red-400 dark:border-red-500/50 rounded-lg text-sm text-red-700 dark:text-red-400`,children:n(`smartPlugs.failedToLoadEntities`,{error:Rt.message})}),(()=>{let t=Nt?.filter(t=>t.ha_entity_id&&t.id!==e?.id).map(e=>e.ha_entity_id)||[],r=(It||[]).filter(e=>!t.includes(e.entity_id)),i=It?.find(e=>e.entity_id===h);return(0,G.jsxs)(`div`,{ref:ze,className:`relative`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.selectEntity`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`}),(0,G.jsx)(`input`,{type:`text`,value:Le?Ne:i?`${i.friendly_name} (${i.entity_id})`:``,onChange:e=>{Pe(e.target.value),Le||Re(!0)},onFocus:()=>{Re(!0),Pe(``)},placeholder:n(`smartPlugs.addSmartPlug.placeholders.searchEntities`),className:`w-full pl-9 pr-8 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`}),h&&!Le&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>{g(``),Pe(``)},className:`absolute right-2 top-1/2 -translate-y-1/2 p-1 hover:bg-bambu-dark-tertiary rounded`,children:(0,G.jsx)(td,{className:`w-4 h-4 text-bambu-gray hover:text-white`})}),Lt&&(0,G.jsx)(Y,{className:`absolute right-2 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray animate-spin`})]}),Le&&(0,G.jsxs)(`div`,{className:`absolute z-50 w-full mt-1 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg shadow-lg max-h-60 overflow-y-auto`,children:[Lt&&(0,G.jsxs)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray flex items-center gap-2`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),n(`smartPlugs.loading`)]}),!Lt&&r.length===0&&(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:Fe?n(`smartPlugs.noEntitiesMatching`,{search:Fe}):n(`smartPlugs.noEntitiesAvailable`)}),!Lt&&r.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{g(e.entity_id),Re(!1),Pe(``),s||c(e.friendly_name)},className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary transition-colors ${e.entity_id===h?`bg-bambu-green/20 text-bambu-green`:`text-white`}`,children:[(0,G.jsx)(`div`,{className:`font-medium`,children:e.friendly_name}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray flex items-center justify-between`,children:[(0,G.jsx)(`span`,{children:e.entity_id}),(0,G.jsx)(`span`,{className:e.state===`on`?`text-bambu-green`:``,children:e.state})]})]},e.entity_id))]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(Fe?`smartPlugs.searchingEntities`:`smartPlugs.showingEntities`,{count:r.length})})]})})(),h&&zt&&zt.length>0&&(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary pt-4 mt-4 space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium mb-1`,children:n(`smartPlugs.energyMonitoringOptional`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-3`,children:n(`smartPlugs.energyMonitoringHint`)})]}),(()=>{let e=zt.filter(e=>e.unit_of_measurement===`W`||e.unit_of_measurement===`kW`||e.unit_of_measurement===`mW`),t=Be?e.filter(e=>e.entity_id.toLowerCase().includes(Be.toLowerCase())||e.friendly_name.toLowerCase().includes(Be.toLowerCase())):e,r=zt.find(e=>e.entity_id===De);return(0,G.jsxs)(`div`,{ref:We,className:`relative`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.powerSensorW`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`}),(0,G.jsx)(`input`,{type:`text`,value:He?Be:r?`${r.friendly_name} (${r.state} ${r.unit_of_measurement})`:``,onChange:e=>{Ve(e.target.value),He||Ue(!0)},onFocus:()=>{Ue(!0),Ve(``)},placeholder:n(`smartPlugs.addSmartPlug.placeholders.searchPowerSensors`),className:`w-full pl-9 pr-8 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`}),De&&!He&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>{Oe(``),Ve(``)},className:`absolute right-2 top-1/2 -translate-y-1/2 p-1 hover:bg-bambu-dark-tertiary rounded`,children:(0,G.jsx)(td,{className:`w-4 h-4 text-bambu-gray hover:text-white`})})]}),He&&(0,G.jsxs)(`div`,{className:`absolute z-50 w-full mt-1 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg shadow-lg max-h-48 overflow-y-auto`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>{Oe(``),Ue(!1),Ve(``)},className:`w-full px-3 py-2 text-left text-sm text-bambu-gray hover:bg-bambu-dark-tertiary`,children:n(`smartPlugs.none`)}),t.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{Oe(e.entity_id),Ue(!1),Ve(``)},className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary ${e.entity_id===De?`bg-bambu-green/20 text-bambu-green`:`text-white`}`,children:[(0,G.jsx)(`div`,{className:`font-medium`,children:e.friendly_name}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray`,children:[e.entity_id,` • `,e.state,` `,e.unit_of_measurement]})]},e.entity_id)),t.length===0&&(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:n(`smartPlugs.noMatchingSensors`)})]})]})})(),(()=>{let e=zt.filter(e=>e.unit_of_measurement===`kWh`||e.unit_of_measurement===`Wh`||e.unit_of_measurement===`MWh`),t=Ge?e.filter(e=>e.entity_id.toLowerCase().includes(Ge.toLowerCase())||e.friendly_name.toLowerCase().includes(Ge.toLowerCase())):e,r=zt.find(e=>e.entity_id===ke);return(0,G.jsxs)(`div`,{ref:Ye,className:`relative`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.energyTodayKwh`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`}),(0,G.jsx)(`input`,{type:`text`,value:qe?Ge:r?`${r.friendly_name} (${r.state} ${r.unit_of_measurement})`:``,onChange:e=>{Ke(e.target.value),qe||Je(!0)},onFocus:()=>{Je(!0),Ke(``)},placeholder:n(`smartPlugs.addSmartPlug.placeholders.searchEnergySensors`),className:`w-full pl-9 pr-8 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`}),ke&&!qe&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>{Ae(``),Ke(``)},className:`absolute right-2 top-1/2 -translate-y-1/2 p-1 hover:bg-bambu-dark-tertiary rounded`,children:(0,G.jsx)(td,{className:`w-4 h-4 text-bambu-gray hover:text-white`})})]}),qe&&(0,G.jsxs)(`div`,{className:`absolute z-50 w-full mt-1 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg shadow-lg max-h-48 overflow-y-auto`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>{Ae(``),Je(!1),Ke(``)},className:`w-full px-3 py-2 text-left text-sm text-bambu-gray hover:bg-bambu-dark-tertiary`,children:n(`smartPlugs.none`)}),t.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{Ae(e.entity_id),Je(!1),Ke(``)},className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary ${e.entity_id===ke?`bg-bambu-green/20 text-bambu-green`:`text-white`}`,children:[(0,G.jsx)(`div`,{className:`font-medium`,children:e.friendly_name}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray`,children:[e.entity_id,` • `,e.state,` `,e.unit_of_measurement]})]},e.entity_id)),t.length===0&&(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:n(`smartPlugs.noMatchingSensors`)})]})]})})(),(()=>{let e=zt.filter(e=>e.unit_of_measurement===`kWh`||e.unit_of_measurement===`Wh`||e.unit_of_measurement===`MWh`),t=Xe?e.filter(e=>e.entity_id.toLowerCase().includes(Xe.toLowerCase())||e.friendly_name.toLowerCase().includes(Xe.toLowerCase())):e,r=zt.find(e=>e.entity_id===je);return(0,G.jsxs)(`div`,{ref:et,className:`relative`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.totalEnergyKwh`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`}),(0,G.jsx)(`input`,{type:`text`,value:Qe?Xe:r?`${r.friendly_name} (${r.state} ${r.unit_of_measurement})`:``,onChange:e=>{Ze(e.target.value),Qe||$e(!0)},onFocus:()=>{$e(!0),Ze(``)},placeholder:n(`smartPlugs.addSmartPlug.placeholders.searchEnergySensors`),className:`w-full pl-9 pr-8 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`}),je&&!Qe&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>{Me(``),Ze(``)},className:`absolute right-2 top-1/2 -translate-y-1/2 p-1 hover:bg-bambu-dark-tertiary rounded`,children:(0,G.jsx)(td,{className:`w-4 h-4 text-bambu-gray hover:text-white`})})]}),Qe&&(0,G.jsxs)(`div`,{className:`absolute z-50 w-full mt-1 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg shadow-lg max-h-48 overflow-y-auto`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>{Me(``),$e(!1),Ze(``)},className:`w-full px-3 py-2 text-left text-sm text-bambu-gray hover:bg-bambu-dark-tertiary`,children:n(`smartPlugs.none`)}),t.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{Me(e.entity_id),$e(!1),Ze(``)},className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary ${e.entity_id===je?`bg-bambu-green/20 text-bambu-green`:`text-white`}`,children:[(0,G.jsx)(`div`,{className:`font-medium`,children:e.friendly_name}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray`,children:[e.entity_id,` • `,e.state,` `,e.unit_of_measurement]})]},e.entity_id)),t.length===0&&(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:n(`smartPlugs.noMatchingSensors`)})]})]})})()]})]})]}),a===`mqtt`&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[!Pt?.mqtt_broker&&(0,G.jsxs)(`div`,{className:`p-3 bg-yellow-100 dark:bg-yellow-500/20 border border-yellow-400 dark:border-yellow-500/50 rounded-lg text-sm text-yellow-700 dark:text-yellow-400`,children:[n(`smartPlugs.mqttNotConfigured`),` `,(0,G.jsx)(`span`,{className:`font-medium`,children:n(`smartPlugs.mqttSettingsPath`)}),` `,n(`smartPlugs.mqttNotConfiguredSuffix`)]}),Pt?.mqtt_broker&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`p-3 bg-blue-50 dark:bg-blue-500/10 border border-blue-300 dark:border-blue-500/30 rounded-lg text-sm text-blue-700 dark:text-blue-300`,children:[(0,G.jsx)(`p`,{className:`font-medium mb-1`,children:n(`smartPlugs.monitorOnly`)}),(0,G.jsx)(`p`,{className:`text-xs opacity-80`,children:n(`smartPlugs.mqttMonitorOnlyDescription`)})]}),(0,G.jsxs)(`div`,{className:`space-y-3 p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium text-sm`,children:n(`smartPlugs.powerMonitoring`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.topic`)}),(0,G.jsx)(`input`,{type:`text`,value:_,onChange:e=>v(e.target.value),placeholder:`zigbee2mqtt/shelly-working-room`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.jsonPath`)}),(0,G.jsx)(`input`,{type:`text`,value:b,onChange:e=>x(e.target.value),placeholder:`power_l1`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.multiplier`)}),(0,G.jsx)(`input`,{type:`text`,value:S,onChange:e=>C(e.target.value),placeholder:`1`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,style:{whiteSpace:`pre-line`},children:n(`smartPlugs.mqttPowerHint`)})]}),(0,G.jsxs)(`div`,{className:`space-y-3 p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`p`,{className:`text-white font-medium text-sm`,children:[n(`smartPlugs.energyMonitoring`),` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,n(`smartPlugs.optional`),`)`]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.topic`)}),(0,G.jsx)(`input`,{type:`text`,value:w,onChange:e=>T(e.target.value),placeholder:`Same as power topic, or different`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.jsonPath`)}),(0,G.jsx)(`input`,{type:`text`,value:E,onChange:e=>D(e.target.value),placeholder:`energy_l1`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.multiplier`)}),(0,G.jsx)(`input`,{type:`text`,value:O,onChange:e=>k(e.target.value),placeholder:`1`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,style:{whiteSpace:`pre-line`},children:n(`smartPlugs.mqttEnergyHint`)})]}),(0,G.jsxs)(`div`,{className:`space-y-3 p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`p`,{className:`text-white font-medium text-sm`,children:[n(`smartPlugs.stateMonitoring`),` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,n(`smartPlugs.optional`),`)`]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.topic`)}),(0,G.jsx)(`input`,{type:`text`,value:A,onChange:e=>j(e.target.value),placeholder:`Same as power topic, or different`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.jsonPath`)}),(0,G.jsx)(`input`,{type:`text`,value:M,onChange:e=>N(e.target.value),placeholder:`state_l1`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.onValue`)}),(0,G.jsx)(`input`,{type:`text`,value:P,onChange:e=>F(e.target.value),placeholder:n(`smartPlugs.addSmartPlug.placeholders.mqttStateOnValue`),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,style:{whiteSpace:`pre-line`},children:n(`smartPlugs.mqttStateHint`)})]})]})]}),a===`rest`&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`space-y-3 p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium text-sm`,children:n(`smartPlugs.restControl`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restMethod`)}),(0,G.jsxs)(`select`,{value:ne,onChange:e=>re(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`GET`,children:`GET`}),(0,G.jsx)(`option`,{value:`POST`,children:`POST`}),(0,G.jsx)(`option`,{value:`PUT`,children:`PUT`}),(0,G.jsx)(`option`,{value:`PATCH`,children:`PATCH`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restOnUrl`)}),(0,G.jsx)(`input`,{type:`text`,value:I,onChange:e=>{L(e.target.value),ot(null)},placeholder:`http://openhab:8080/rest/items/MyPlug`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[n(`smartPlugs.restOnBody`),` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,n(`smartPlugs.optional`),`)`]})]}),(0,G.jsx)(`input`,{type:`text`,value:R,onChange:e=>z(e.target.value),placeholder:n(`smartPlugs.restBodyHint`),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restOffUrl`)}),(0,G.jsx)(`input`,{type:`text`,value:B,onChange:e=>{V(e.target.value),ot(null)},placeholder:`http://openhab:8080/rest/items/MyPlug`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[n(`smartPlugs.restOffBody`),` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,n(`smartPlugs.optional`),`)`]})]}),(0,G.jsx)(`input`,{type:`text`,value:ee,onChange:e=>te(e.target.value),placeholder:n(`smartPlugs.restBodyHint`),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsxs)(`div`,{className:`space-y-3 p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`p`,{className:`text-white font-medium text-sm`,children:[n(`smartPlugs.restHeaders`),` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,n(`smartPlugs.optional`),`)`]})]}),(0,G.jsx)(`div`,{children:(0,G.jsx)(`textarea`,{value:ie,onChange:e=>ae(e.target.value),placeholder:n(`smartPlugs.restHeadersHint`),rows:2,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none font-mono text-sm`})})]}),(0,G.jsxs)(`div`,{className:`space-y-3 p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`p`,{className:`text-white font-medium text-sm`,children:[n(`smartPlugs.stateMonitoring`),` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,n(`smartPlugs.optional`),`)`]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restStatusUrl`)}),(0,G.jsx)(`input`,{type:`text`,value:oe,onChange:e=>se(e.target.value),placeholder:n(`smartPlugs.restStatusHint`),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restStatusPath`)}),(0,G.jsx)(`input`,{type:`text`,value:H,onChange:e=>ce(e.target.value),placeholder:n(`smartPlugs.restPathHint`),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restStatusOnValue`)}),(0,G.jsx)(`input`,{type:`text`,value:le,onChange:e=>ue(e.target.value),placeholder:`ON`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]})]})]}),(0,G.jsxs)(`div`,{className:`space-y-3 p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`p`,{className:`text-white font-medium text-sm`,children:[n(`smartPlugs.energyMonitoring`),` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,n(`smartPlugs.optional`),`)`]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[n(`smartPlugs.restPowerUrl`),` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,n(`smartPlugs.optional`),`)`]})]}),(0,G.jsx)(`input`,{type:`text`,value:de,onChange:e=>fe(e.target.value),placeholder:n(`smartPlugs.restPowerUrlHint`),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restPowerPath`)}),(0,G.jsx)(`input`,{type:`text`,value:pe,onChange:e=>me(e.target.value),placeholder:n(`smartPlugs.restPathHint`),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restPowerMultiplier`)}),(0,G.jsx)(`input`,{type:`text`,value:he,onChange:e=>ge(e.target.value),placeholder:`1`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[n(`smartPlugs.restEnergyUrl`),` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,n(`smartPlugs.optional`),`)`]})]}),(0,G.jsx)(`input`,{type:`text`,value:_e,onChange:e=>ve(e.target.value),placeholder:n(`smartPlugs.restEnergyUrlHint`),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restEnergyPath`)}),(0,G.jsx)(`input`,{type:`text`,value:ye,onChange:e=>be(e.target.value),placeholder:n(`smartPlugs.restPathHint`),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restEnergyMultiplier`)}),(0,G.jsx)(`input`,{type:`text`,value:xe,onChange:e=>Se(e.target.value),placeholder:`1`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.restEnergyHint`)}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restEnergyTotalPath`)}),(0,G.jsx)(`input`,{type:`text`,value:Ce,onChange:e=>we(e.target.value),placeholder:n(`smartPlugs.restEnergyTotalPathHint`),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.restEnergyTotalMultiplier`)}),(0,G.jsx)(`input`,{type:`text`,value:Te,onChange:e=>Ee(e.target.value),placeholder:`1`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.restEnergyTotalHint`)})]}),(I.trim()||B.trim())&&(0,G.jsx)(`div`,{className:`flex gap-2`,children:(0,G.jsxs)(Q,{type:`button`,variant:`secondary`,onClick:async()=>{ot(null);try{let e=I.trim()||B.trim(),t=await Z.testRESTConnection(e,ne,ie.trim()||null);ot({success:t.success}),t.success||ct(t.error||n(`smartPlugs.addSmartPlug.connectionFailed`))}catch{ot({success:!1}),ct(n(`smartPlugs.addSmartPlug.connectionFailed`))}},className:`w-full`,children:[(0,G.jsx)(Zu,{className:`w-4 h-4`}),n(`smartPlugs.testConnection`)]})}),at&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm ${at.success?`text-green-700 dark:text-green-400`:`text-red-700 dark:text-red-400`}`,children:[at.success?(0,G.jsx)(xs,{className:`w-4 h-4`}):(0,G.jsx)(Xu,{className:`w-4 h-4`}),at.success?n(`smartPlugs.connectionSuccess`):n(`smartPlugs.addSmartPlug.connectionFailed`)]})]}),a===`tasmota`&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.ipAddress`)}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`input`,{type:`text`,value:l,onChange:e=>{u(e.target.value),ot(null)},placeholder:`192.168.1.100`,className:`flex-1 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsxs)(Q,{type:`button`,variant:`secondary`,onClick:()=>Ut.mutate(),disabled:!l.trim()||Ut.isPending,children:[Ut.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Zu,{className:`w-4 h-4`}),n(`smartPlugs.test`)]})]})]}),a===`tasmota`&&at&&(0,G.jsx)(`div`,{className:`p-3 rounded-lg flex items-center gap-2 ${at.success?`bg-bambu-green/20 border border-bambu-green/50 text-bambu-green`:`bg-red-100 dark:bg-red-500/20 border border-red-400 dark:border-red-500/50 text-red-700 dark:text-red-400`}`,children:at.success?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(xs,{className:`w-5 h-5`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`font-medium`,children:n(`smartPlugs.connectedResult`)}),(0,G.jsxs)(`p`,{className:`text-sm opacity-80`,children:[at.device_name&&n(`smartPlugs.deviceLabel`,{name:at.device_name}),n(`smartPlugs.stateLabel`,{state:at.state})]})]})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Xu,{className:`w-5 h-5`}),(0,G.jsx)(`span`,{children:n(`smartPlugs.addSmartPlug.connectionFailed`)})]})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.nameLabel`)}),(0,G.jsx)(`input`,{type:`text`,value:s,onChange:e=>c(e.target.value),placeholder:n(`smartPlugs.addSmartPlug.placeholders.plugName`),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),a===`tasmota`&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.username`)}),(0,G.jsx)(`input`,{type:`text`,value:d,onChange:e=>f(e.target.value),placeholder:`admin`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.password`)}),(0,G.jsx)(`input`,{type:`password`,value:p,onChange:e=>m(e.target.value),placeholder:`********`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray -mt-2`,children:n(`smartPlugs.authHint`)})]}),a!==`mqtt`&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.linkToPrinter`)}),(0,G.jsxs)(`select`,{value:tt??``,onChange:e=>nt(e.target.value?Number(e.target.value):null),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:``,children:n(`smartPlugs.noPrinter`)}),Kt?.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(`smartPlugs.linkingDescription`)}),tt!==null&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between mt-3`,children:[(0,G.jsxs)(`div`,{className:`pr-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`smartPlugs.controlsPrinterPower`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.controlsPrinterPowerDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer shrink-0`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:rt,onChange:e=>it(e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]})]}),(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary pt-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(qo,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:n(`smartPlugs.powerAlerts`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:lt,onChange:e=>ut(e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),lt&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.alertAbove`)}),(0,G.jsx)(`input`,{type:`number`,value:dt,onChange:e=>ft(e.target.value),placeholder:`e.g. 200`,min:`0`,max:`5000`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.alertBelow`)}),(0,G.jsx)(`input`,{type:`number`,value:pt,onChange:e=>mt(e.target.value),placeholder:`e.g. 10`,min:`0`,max:`5000`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.alertDescription`)})]})]}),a!==`mqtt`&&(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary pt-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(js,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:n(`smartPlugs.dailySchedule`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:ht,onChange:e=>gt(e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),ht&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.turnOnAt`)}),(0,G.jsx)(`input`,{type:`time`,value:_t,onChange:e=>vt(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`smartPlugs.turnOffAt`)}),(0,G.jsx)(`input`,{type:`time`,value:yt,onChange:e=>bt(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.scheduleDescription`)})]})]}),(0,G.jsx)(`div`,{className:`border-t border-bambu-dark-tertiary pt-4`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Jc,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white font-medium`,children:n(`smartPlugs.showInSwitchbar`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.quickAccessSidebar`)})]})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:xt,onChange:e=>St(e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]})}),a===`homeassistant`&&(0,G.jsx)(`div`,{className:`border-t border-bambu-dark-tertiary pt-4`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(ic,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white font-medium`,children:n(`smartPlugs.showOnPrinterCard`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`smartPlugs.displayOnPrinterCard`)})]})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ct,onChange:e=>wt(e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]})}),(0,G.jsxs)(`div`,{className:`flex gap-3 pt-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:t,className:`flex-1`,children:n(`smartPlugs.cancel`)}),(0,G.jsxs)(Q,{type:`submit`,disabled:Jt,className:`flex-1`,children:[Jt?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Kl,{className:`w-4 h-4`}),n(i?`smartPlugs.save`:`smartPlugs.add`)]})]})]})]})})}function ZUe({sensor:e,printers:t,onClose:n}){let{t:r}=U(),i=co(),{showToast:a}=Gd(),o=!!e,[s,c]=(0,y.useState)(e?.printer_id??t[0]?.id??``),[l,u]=(0,y.useState)(e?.entity_id??``),[d,f]=(0,y.useState)(e?.kind??`binary`),[p,m]=(0,y.useState)(e?.device_class??null),[h,g]=(0,y.useState)(e?.unit??null),[_,v]=(0,y.useState)(e?.name??``),[b,x]=(0,y.useState)(e?.alert_state??``),[S,C]=(0,y.useState)(e?.alert_above?.toString()??``),[w,T]=(0,y.useState)(e?.alert_below?.toString()??``),[E,D]=(0,y.useState)(e?.show_on_printer_card??!0),[O,k]=(0,y.useState)(e?.notify_on_alert??!1),[A,j]=(0,y.useState)(e?.block_print??!1),[M,N]=(0,y.useState)(``),[P,F]=(0,y.useState)(null);(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&n()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[n]);let{data:I}=K({queryKey:[`settings`],queryFn:Z.getSettings}),L=!!(I?.ha_enabled&&I?.ha_url&&I?.ha_token),{data:R,isLoading:z,error:B}=K({queryKey:[`bindableHAEntities`],queryFn:()=>Z.getBindableHAEntities(),enabled:L}),V=(0,y.useMemo)(()=>{let e=M.trim().toLowerCase(),t=R??[];return e?t.filter(t=>t.entity_id.toLowerCase().includes(e)||t.friendly_name.toLowerCase().includes(e)):t},[R,M]),ee=e=>{u(e.entity_id),m(e.device_class),g(e.unit_of_measurement);let t=e.domain===`binary_sensor`?`binary`:`numeric`;f(t),t===`numeric`?x(``):(C(``),T(``)),_.trim()||v(e.friendly_name.slice(0,100))},te=()=>{i.invalidateQueries({queryKey:[`haSensors`]}),i.invalidateQueries({queryKey:[`haSensorReadings`]})},ne=q({mutationFn:()=>{let t={name:_.trim(),entity_id:l,kind:d,device_class:p,unit:h,alert_state:d===`binary`&&b?b:null,alert_above:d===`numeric`&&S!==``?Number(S):null,alert_below:d===`numeric`&&w!==``?Number(w):null,block_print:A,notify_on_alert:O,show_on_printer_card:E};return o?Z.updateHASensor(e.id,t):Z.createHASensor({...t,printer_id:Number(s)})},onSuccess:()=>{te(),a(r(o?`haSensors.toast.updated`:`haSensors.toast.created`),`success`),n()},onError:e=>F(e.message)}),re=q({mutationFn:()=>Z.deleteHASensor(e.id),onSuccess:()=>{te(),a(r(`haSensors.toast.deleted`),`success`),n()},onError:e=>F(e.message)}),ie=d===`binary`?b!==``:S!==``||w!==``,ae=e=>{if(e.preventDefault(),F(null),!l)return F(r(`haSensors.error.pickEntity`));if(!_.trim())return F(r(`haSensors.error.nameRequired`));if(s===``)return F(r(`haSensors.error.printerRequired`));if((A||O)&&!ie)return F(r(`haSensors.error.alertRequired`));ne.mutate()},oe=RT[p??``],se=e=>{let t=oe?.[e]??e;return r(`haSensors.states.${t}`,{defaultValue:t})},H=ne.isPending||re.isPending;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:n,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-lg max-h-[90vh] overflow-y-auto`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-full bg-bambu-green/20 text-bambu-green`,children:(0,G.jsx)(wc,{className:`w-5 h-5`})}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:r(o?`haSensors.editTitle`:`haSensors.addTitle`)})]}),(0,G.jsx)(`button`,{onClick:n,className:`text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`form`,{onSubmit:ae,className:`p-6 space-y-4`,children:[P&&(0,G.jsx)(`div`,{className:`p-3 bg-red-100 dark:bg-red-500/20 border border-red-300 dark:border-red-500/50 rounded-lg text-sm text-red-700 dark:text-red-400`,children:P}),!o&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`haSensors.printer`)}),(0,G.jsx)(`select`,{value:s,onChange:e=>c(e.target.value===``?``:Number(e.target.value)),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`,children:t.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))})]}),!L&&(0,G.jsxs)(`div`,{className:`p-3 bg-yellow-100 dark:bg-yellow-500/20 border border-yellow-400 dark:border-yellow-500/50 rounded-lg text-sm text-yellow-700 dark:text-yellow-400`,children:[r(`smartPlugs.haNotConfigured`),` `,(0,G.jsx)(`span`,{className:`font-medium`,children:r(`smartPlugs.haSettingsPath`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1 ${L?``:`opacity-50`}`,children:r(`haSensors.entity`)}),B&&(0,G.jsx)(`div`,{className:`p-3 mb-2 bg-red-100 dark:bg-red-500/20 rounded-lg text-sm text-red-700 dark:text-red-400`,children:B.message}),(0,G.jsxs)(`div`,{className:`relative mb-2`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:M,onChange:e=>N(e.target.value),placeholder:r(`haSensors.searchPlaceholder`),disabled:!L,className:`w-full pl-9 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white disabled:opacity-50 disabled:cursor-not-allowed`})]}),(0,G.jsxs)(`div`,{className:`max-h-44 overflow-y-auto rounded-lg border border-bambu-dark-tertiary ${L?``:`opacity-50`}`,children:[!L&&(0,G.jsx)(`div`,{className:`p-3 text-sm text-bambu-gray`,children:r(`haSensors.noEntities`)}),L&&z&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 p-3 text-sm text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),r(`common.loading`)]}),L&&!z&&V.length===0&&(0,G.jsx)(`div`,{className:`p-3 text-sm text-bambu-gray`,children:r(`haSensors.noEntities`)}),L&&!z&&V.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>ee(e),className:`w-full text-left px-3 py-2 text-sm transition-colors ${e.entity_id===l?`bg-bambu-green/20 text-bambu-green`:`text-white hover:bg-bambu-dark`}`,children:[(0,G.jsx)(`div`,{className:`font-medium`,children:e.friendly_name}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray`,children:[e.entity_id,e.state!==null&&` — ${e.state}`,e.unit_of_measurement?` ${e.unit_of_measurement}`:``]})]},e.entity_id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`haSensors.name`)}),(0,G.jsx)(`input`,{type:`text`,value:_,onChange:e=>v(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`haSensors.alertWhen`)}),d===`binary`?(0,G.jsxs)(`select`,{value:b,onChange:e=>x(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`,children:[(0,G.jsx)(`option`,{value:``,children:r(`haSensors.alertNever`)}),(0,G.jsx)(`option`,{value:`on`,children:se(`on`)}),(0,G.jsx)(`option`,{value:`off`,children:se(`off`)})]}):(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`span`,{className:`block text-xs text-bambu-gray mb-1`,children:[r(`haSensors.alertAbove`),` `,h??``]}),(0,G.jsx)(`input`,{type:`number`,step:`any`,value:S,onChange:e=>C(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`span`,{className:`block text-xs text-bambu-gray mb-1`,children:[r(`haSensors.alertBelow`),` `,h??``]}),(0,G.jsx)(`input`,{type:`number`,step:`any`,value:w,onChange:e=>T(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`})]})]}),(0,G.jsx)(`p`,{className:`mt-1 text-xs text-bambu-gray`,children:r(`haSensors.alertHint`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:E,onChange:e=>D(e.target.checked),className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:r(`haSensors.showOnCard`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:O,onChange:e=>k(e.target.checked),disabled:!ie,className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-sm ${ie?`text-white`:`text-bambu-gray`}`,children:r(`haSensors.notifyOnAlert`)})]}),(0,G.jsxs)(`label`,{className:`flex items-start gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A,onChange:e=>j(e.target.checked),disabled:!ie,className:`w-4 h-4 mt-0.5`}),(0,G.jsxs)(`span`,{children:[(0,G.jsx)(`span`,{className:`block text-sm ${ie?`text-white`:`text-bambu-gray`}`,children:r(`haSensors.blockPrint`)}),(0,G.jsx)(`span`,{className:`block text-xs text-bambu-gray`,children:r(`haSensors.blockPrintHint`)})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between pt-2`,children:[o?(0,G.jsx)(Q,{type:`button`,variant:`danger`,onClick:()=>re.mutate(),disabled:H,children:r(`common.delete`)}):(0,G.jsx)(`span`,{}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:n,disabled:H,children:r(`common.cancel`)}),(0,G.jsxs)(Q,{type:`submit`,disabled:H||!L&&!o,children:[H?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Kl,{className:`w-4 h-4`}),r(`common.save`)]})]})]})]})]})})}function QUe({open:e,onClose:t,onPickLocation:n,startCreating:r}){let{t:i}=U(),a=co(),{showToast:o}=Gd(),[s,c]=(0,y.useState)(!1),[l,u]=(0,y.useState)(null),[d,f]=(0,y.useState)(``),[p,m]=(0,y.useState)(null),{data:h=[],isLoading:g}=K({queryKey:T8,queryFn:Z.getLocations,enabled:e}),{data:_=[]}=K({queryKey:[`locationHaSensors`],queryFn:()=>Z.getLocationHASensors(),enabled:e}),v=_.reduce((e,t)=>(e[t.location_id]=(e[t.location_id]??0)+1,e),{}),b=()=>{E8(a),a.invalidateQueries({queryKey:[`inventory-spools`]}),a.invalidateQueries({queryKey:[`spoolman-inventory-spools`]}),a.invalidateQueries({queryKey:[`locationHaSensors`]}),a.invalidateQueries({queryKey:[`locationHaSensorReadings`]})},x=q({mutationFn:async()=>{let e=d.trim();if(!e)throw Error(i(`locations.nameRequired`));return l?Z.updateLocation(l.id,{name:e}):Z.createLocation({name:e})},onSuccess:e=>{if(o(i(l?`locations.updated`:`locations.created`),`success`),b(),!l&&r){n?.(e.id),t();return}c(!1),u(null),f(``)},onError:e=>{o(e.message||i(`locations.saveFailed`),`error`)}}),S=q({mutationFn:e=>Z.deleteLocation(e),onSuccess:()=>{o(i(`locations.deleted`),`success`),m(null),b()},onError:e=>{o(e.message||i(`locations.deleteFailed`),`error`)}}),C=()=>{u(null),f(``),c(!0)};(0,y.useEffect)(()=>{e&&r&&(u(null),f(``),c(!0))},[e,r]);let w=e=>{u(e),f(e.name),c(!0)},T=(0,y.useCallback)(()=>{if(!x.isPending){if(r){t();return}c(!1),u(null),f(``)}},[x.isPending,r,t]);(0,y.useEffect)(()=>{if(!e)return;let n=e=>{e.key===`Escape`&&(x.isPending||S.isPending||(s?T():p||t()))};return document.addEventListener(`keydown`,n),()=>document.removeEventListener(`keydown`,n)},[e,s,p,x.isPending,S.isPending,T,t]);let E=e=>{e.preventDefault(),x.mutate()};if(!e)return null;let D=`locations-modal-title`,O=`location-editor-title`,k=(0,G.jsxs)(`form`,{onSubmit:E,children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,htmlFor:`location-name`,children:i(`locations.name`)}),(0,G.jsx)(`input`,{id:`location-name`,type:`text`,maxLength:255,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green mb-4`,placeholder:i(`locations.createPlaceholder`),value:d,onChange:e=>f(e.target.value),autoFocus:!0}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:T,children:i(`common.cancel`)}),(0,G.jsxs)(Q,{type:`submit`,disabled:x.isPending||!d.trim(),children:[x.isPending&&(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),i(`common.save`)]})]})]});return r?s?(0,G.jsxs)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60`,onClick:T}),(0,G.jsxs)(`div`,{className:`relative w-full max-w-md mx-4 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl p-6 shadow-2xl`,role:`dialog`,"aria-modal":`true`,"aria-labelledby":O,children:[(0,G.jsx)(`h3`,{id:O,className:`text-lg font-semibold text-white mb-4`,children:i(`locations.add`)}),k]})]}):null:(0,G.jsxs)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60`,onClick:()=>{x.isPending||S.isPending||t()}}),(0,G.jsxs)(`div`,{className:`relative w-full max-w-2xl mx-4 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-2xl max-h-[90vh] flex flex-col`,role:`dialog`,"aria-modal":`true`,"aria-labelledby":D,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-4 px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h2`,{id:D,className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(al,{className:`w-5 h-5 text-bambu-green`}),i(`locations.title`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm mt-0.5`,children:i(`locations.subtitle`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(Q,{onClick:C,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`locations.add`)]}),(0,G.jsx)(`button`,{type:`button`,className:`p-1.5 text-bambu-gray hover:text-white rounded`,onClick:t,"aria-label":i(`common.close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})})]})]}),(0,G.jsx)(`div`,{className:`overflow-y-auto`,children:g?(0,G.jsxs)(`div`,{className:`flex items-center justify-center py-16 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin mr-2`}),i(`common.loading`)]}):h.length===0?(0,G.jsx)(`div`,{className:`py-16 text-center text-bambu-gray`,children:i(`locations.empty`)}):(0,G.jsxs)(`table`,{className:`w-full text-sm table-fixed`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary text-left text-bambu-gray`,children:[(0,G.jsx)(`th`,{className:`px-4 py-3 font-medium`,children:i(`locations.name`)}),(0,G.jsx)(`th`,{className:`px-2 py-3 font-medium text-right w-24`,children:i(`locations.sensors`)}),(0,G.jsx)(`th`,{className:`pl-[28px] pr-4 py-3 font-medium text-right w-28`,children:i(`locations.spools`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 font-medium text-right w-32`,children:i(`common.actions`)})]})}),(0,G.jsx)(`tbody`,{children:h.map(e=>(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/60 hover:bg-bambu-dark-tertiary/30 cursor-pointer`,onClick:()=>{n&&(n(e.id),t())},children:[(0,G.jsx)(`td`,{className:`px-4 py-3 text-white font-medium truncate`,children:e.name}),(0,G.jsx)(`td`,{className:`px-2 py-3 text-right text-bambu-gray`,children:v[e.id]??0}),(0,G.jsx)(`td`,{className:`pl-[28px] pr-4 py-3 text-right text-bambu-gray`,children:e.spool_count}),(0,G.jsx)(`td`,{className:`px-4 py-3 text-right`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-1`,children:[(0,G.jsx)(`button`,{type:`button`,className:`p-1.5 text-bambu-gray hover:text-bambu-green rounded`,onClick:()=>w(e),title:i(`common.edit`),"aria-label":i(`locations.editAria`,{name:e.name,defaultValue:`Edit ${e.name}`}),children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{type:`button`,className:`p-1.5 text-bambu-gray hover:text-red-600 dark:hover:text-red-400 rounded disabled:opacity-40`,disabled:e.spool_count>0,onClick:()=>m(e),title:e.spool_count>0?i(`locations.deleteBlocked`):i(`common.delete`),"aria-label":i(`locations.deleteAria`,{name:e.name,defaultValue:`Delete ${e.name}`}),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})})]},e.id))})]})})]}),s&&(0,G.jsxs)(`div`,{className:`fixed inset-0 z-[60] flex items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60`,onClick:T}),(0,G.jsxs)(`div`,{className:`relative w-full max-w-md mx-4 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl p-6 shadow-2xl`,role:`dialog`,"aria-modal":`true`,"aria-labelledby":O,children:[(0,G.jsx)(`h3`,{id:O,className:`text-lg font-semibold text-white mb-4`,children:i(l?`locations.edit`:`locations.add`)}),k]})]}),p&&(0,G.jsx)(rf,{title:i(`locations.confirmDelete`,{name:p.name}),message:v[p.id]?i(`locations.confirmDeleteMessageWithSensors`):i(`locations.confirmDeleteMessage`),confirmText:i(`common.delete`),variant:`danger`,isLoading:S.isPending,onConfirm:()=>S.mutate(p.id),onCancel:()=>m(null)})]})}function G8(e){return e===`temperature`?`temperature`:e===`humidity`?`humidity`:e===`battery`?`battery`:null}var K8={temperature:`temperature`,humidity:`humidity`,battery:`battery`};function $Ue(e,t,n){let r=K8[t];if(!e.toLowerCase().endsWith(r))return[];let i=e.slice(0,e.length-r.length),a=[];return Object.keys(K8).forEach(e=>{if(e===t)return;let r=`${i}${K8[e]}`.toLowerCase(),o=n.find(e=>e.entity_id.toLowerCase()===r);o&&a.push(o)}),a}function eWe({sensor:e,locations:t,onClose:n}){let{t:r}=U(),i=co(),{showToast:a}=Gd(),o=!!e,[s,c]=(0,y.useState)(e?.location_id??t[0]?.id??``),[l,u]=(0,y.useState)(e?.entity_id??``),[d,f]=(0,y.useState)(e?.kind??`numeric`),[p,m]=(0,y.useState)(e?.device_class??null),[h,g]=(0,y.useState)(e?.unit??null),[_,v]=(0,y.useState)(e?.name??``),b=(0,y.useRef)(e?.name??``),[x,S]=(0,y.useState)(e?.alert_state??``),[C,w]=(0,y.useState)(e?.alert_above?.toString()??``),[T,E]=(0,y.useState)(e?.alert_below?.toString()??``),[D,O]=(0,y.useState)(e?.notify_on_alert??!1),[k,A]=(0,y.useState)(e?.show_on_card??!0),[j,M]=(0,y.useState)(``),[N,P]=(0,y.useState)(null),[F,I]=(0,y.useState)(!1),[L,R]=(0,y.useState)(!1),[z,B]=(0,y.useState)(null),[V,ee]=(0,y.useState)(!1),[te,ne]=(0,y.useState)([]),[re,ie]=(0,y.useState)({}),{data:ae}=K({queryKey:[`settings`],queryFn:Z.getSettings}),oe=!!(ae?.ha_enabled&&ae?.ha_url&&ae?.ha_token),{data:se,isLoading:H,error:ce}=K({queryKey:[`bindableLocationHAEntities`],queryFn:()=>Z.getBindableLocationHAEntities(),enabled:oe}),le=(0,y.useMemo)(()=>(se??[]).filter(e=>G8(e.device_class)!==null),[se]),{data:ue}=K({queryKey:[`locationHaSensors`],queryFn:()=>Z.getLocationHASensors()}),de=le.find(e=>e.entity_id===l),fe=(0,y.useMemo)(()=>{let e=j.trim().toLowerCase(),t=le??[],n=e?t.filter(t=>t.entity_id.toLowerCase().includes(e)||t.friendly_name.toLowerCase().includes(e)):t;return!de||n[0]?.entity_id===de.entity_id?n:[de,...n.filter(e=>e.entity_id!==de.entity_id)]},[le,j,de]),pe=e=>{u(e.entity_id),m(e.device_class),g(e.unit_of_measurement?.slice(0,16)??null);let t=e.domain===`binary_sensor`?`binary`:`numeric`;if(f(t),t===`numeric`?S(``):(w(``),E(``)),_===b.current){let t=e.friendly_name.slice(0,100);v(t),b.current=t}if(!o){let n=G8(e.device_class);if(n){let e=A8(ae?.location_sensor_alert_defaults)[n];t===`numeric`&&(w(n===`battery`?``:e.alertAbove),E(e.alertBelow)),O(e.notifyOnAlert),A(e.showOnCard)}}},me=()=>{i.invalidateQueries({queryKey:[`locationHaSensors`]}),i.invalidateQueries({queryKey:[`locationHaSensorReadings`]})},he=()=>({name:_.trim(),entity_id:l,kind:d,device_class:p,unit:h,alert_state:d===`binary`&&x?x:null,alert_above:d===`numeric`&&G8(p)!==`battery`&&C!==``?Number(C):null,alert_below:d===`numeric`&&T!==``?Number(T):null,notify_on_alert:D,show_on_card:k}),ge=q({mutationFn:()=>{let t=he();return o?Z.updateLocationHASensor(e.id,t):Z.createLocationHASensor({...t,location_id:Number(s)})},onSuccess:()=>{me(),a(r(o?`locationHaSensors.toast.updated`:`locationHaSensors.toast.created`),`success`),n()},onError:e=>P(e.message)}),_e=q({mutationFn:async()=>{let e=Number(s);await Z.createLocationHASensor({...he(),location_id:e});let t=A8(ae?.location_sensor_alert_defaults),n=te.filter(e=>re[e.entity_id]);for(let r of n){let n=G8(r.device_class),i=n?t[n]:null;await Z.createLocationHASensor({name:r.friendly_name.slice(0,100),entity_id:r.entity_id,kind:r.domain===`binary_sensor`?`binary`:`numeric`,device_class:r.device_class,unit:r.unit_of_measurement?.slice(0,16)??null,alert_state:null,alert_above:n!==`battery`&&i&&i.alertAbove!==``?Number(i.alertAbove):null,alert_below:i&&i.alertBelow!==``?Number(i.alertBelow):null,notify_on_alert:i?.notifyOnAlert??!1,show_on_card:i?.showOnCard??k,location_id:e})}return n},onSuccess:e=>{me(),ee(!1),e.length>0?a(r(`locationHaSensors.autoAdd.added`,{names:e.map(e=>e.entity_id).join(`, `)}),`success`):a(r(`locationHaSensors.toast.created`),`success`),n()},onError:e=>{me(),ee(!1),P(e.message)}}),ve=q({mutationFn:()=>Z.deleteLocationHASensor(e.id),onSuccess:()=>{me(),a(r(`locationHaSensors.toast.deleted`),`success`),n()},onError:e=>P(e.message)}),ye=q({mutationFn:()=>Z.updateLocationHASensor(z.id,he()),onSuccess:()=>{me(),R(!1),B(null),a(r(`locationHaSensors.toast.updated`),`success`),n()},onError:e=>{R(!1),B(null),P(e.message)}}),be=d===`binary`?x!==``:C!==``||T!==``,xe=e=>{if(e.preventDefault(),P(null),!l)return P(r(`haSensors.error.pickEntity`));if(!_.trim())return P(r(`haSensors.error.nameRequired`));if(s===``)return P(r(`locationHaSensors.error.locationRequired`));if(D&&!be)return P(r(`haSensors.error.alertRequired`));if(!o){let e=(ue??[]).filter(e=>e.location_id===Number(s)),t=G8(p);if(t){let n=e.find(e=>G8(e.device_class)===t);if(n){B(n),R(!0);return}}if(e.length===0&&t){let e=$Ue(l,t,le);if(e.length>0){ne(e),ie(Object.fromEntries(e.map(e=>[e.entity_id,!0]))),ee(!0);return}a(r(`locationHaSensors.autoAdd.noneFound`),`info`)}}ge.mutate()},Se=RT[p??``],Ce=e=>{let t=Se?.[e]??e;return r(`haSensors.states.${t}`,{defaultValue:t})},we=ge.isPending||ve.isPending||ye.isPending||_e.isPending,Te=t.find(e=>e.id===Number(s));return(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&!we&&n()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[n,we]),(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:()=>{we||n()},children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-lg max-h-[90vh] overflow-y-auto`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-full bg-bambu-green/20 text-bambu-green`,children:(0,G.jsx)(wc,{className:`w-5 h-5`})}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:r(o?`locationHaSensors.editTitle`:`locationHaSensors.addTitle`)})]}),(0,G.jsx)(`button`,{onClick:n,disabled:we,className:`text-bambu-gray hover:text-white transition-colors disabled:opacity-50 disabled:cursor-not-allowed`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`form`,{onSubmit:xe,className:`p-6 space-y-4`,children:[N&&(0,G.jsx)(`div`,{className:`p-3 bg-red-100 dark:bg-red-500/20 border border-red-300 dark:border-red-500/50 rounded-lg text-sm text-red-700 dark:text-red-400`,children:N}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`locationHaSensors.location`)}),o?(0,G.jsx)(`div`,{className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`,children:t.find(t=>t.id===e.location_id)?.name??r(`locationHaSensors.unknownLocation`)}):(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`select`,{value:s,onChange:e=>c(e.target.value===``?``:Number(e.target.value)),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`,children:t.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>I(!0),className:`p-2 rounded-lg bg-bambu-dark-tertiary hover:bg-bambu-gray-dark text-white transition-colors shrink-0`,title:r(`locations.add`),"aria-label":r(`locations.add`),children:(0,G.jsx)(Pl,{className:`w-4 h-4`})})]})]}),!oe&&(0,G.jsxs)(`div`,{className:`p-3 bg-yellow-100 dark:bg-yellow-500/20 border border-yellow-400 dark:border-yellow-500/50 rounded-lg text-sm text-yellow-700 dark:text-yellow-400`,children:[r(`smartPlugs.haNotConfigured`),` `,(0,G.jsx)(`span`,{className:`font-medium`,children:r(`smartPlugs.haSettingsPath`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1 ${oe?``:`opacity-50`}`,children:r(`haSensors.entity`)}),ce&&(0,G.jsx)(`div`,{className:`p-3 mb-2 bg-red-100 dark:bg-red-500/20 rounded-lg text-sm text-red-700 dark:text-red-400`,children:ce.message}),(0,G.jsxs)(`div`,{className:`relative mb-2`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:j,onChange:e=>M(e.target.value),placeholder:r(`haSensors.searchPlaceholder`),disabled:!oe,className:`w-full pl-9 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white disabled:opacity-50 disabled:cursor-not-allowed`})]}),(0,G.jsxs)(`div`,{className:`max-h-44 overflow-y-auto rounded-lg border border-bambu-dark-tertiary ${oe?``:`opacity-50`}`,children:[l&&!de&&(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm bg-bambu-green/10 text-bambu-green border-b border-bambu-dark-tertiary`,children:r(`locationHaSensors.currentlyBound`,{entity:l})}),!oe&&(0,G.jsx)(`div`,{className:`p-3 text-sm text-bambu-gray`,children:r(`haSensors.noEntities`)}),oe&&H&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 p-3 text-sm text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),r(`common.loading`)]}),oe&&!H&&fe.length===0&&(0,G.jsx)(`div`,{className:`p-3 text-sm text-bambu-gray`,children:r(`haSensors.noEntities`)}),oe&&!H&&fe.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>pe(e),className:`w-full text-left px-3 py-2 text-sm transition-colors ${e.entity_id===l?`bg-bambu-green/20 text-bambu-green`:`text-white hover:bg-bambu-dark`}`,children:[(0,G.jsx)(`div`,{className:`font-medium`,children:e.friendly_name}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray`,children:[e.entity_id,e.state!==null&&` — ${e.state}`,e.unit_of_measurement?` ${e.unit_of_measurement}`:``]})]},e.entity_id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,htmlFor:`location-ha-sensor-name`,children:r(`haSensors.name`)}),(0,G.jsx)(`input`,{id:`location-ha-sensor-name`,type:`text`,value:_,onChange:e=>v(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`})]}),l&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`haSensors.alertWhen`)}),d===`binary`?(0,G.jsxs)(`select`,{value:x,onChange:e=>S(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`,children:[(0,G.jsx)(`option`,{value:``,children:r(`haSensors.alertNever`)}),(0,G.jsx)(`option`,{value:`on`,children:Ce(`on`)}),(0,G.jsx)(`option`,{value:`off`,children:Ce(`off`)})]}):G8(p)===`battery`?(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`span`,{className:`block text-xs text-bambu-gray mb-1`,children:[r(`haSensors.alertBelow`),` `,h??``]}),(0,G.jsx)(`input`,{type:`number`,step:`any`,value:T,onChange:e=>E(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`})]}):(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`span`,{className:`block text-xs text-bambu-gray mb-1`,children:[r(`haSensors.alertAbove`),` `,h??``]}),(0,G.jsx)(`input`,{type:`number`,step:`any`,value:C,onChange:e=>w(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`span`,{className:`block text-xs text-bambu-gray mb-1`,children:[r(`haSensors.alertBelow`),` `,h??``]}),(0,G.jsx)(`input`,{type:`number`,step:`any`,value:T,onChange:e=>E(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`})]})]}),(0,G.jsx)(`p`,{className:`mt-1 text-xs text-bambu-gray`,children:r(`haSensors.alertHint`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:k,onChange:e=>A(e.target.checked),className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:r(`locationHaSensors.showOnCard`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:D,onChange:e=>O(e.target.checked),disabled:!be,className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-sm ${be?`text-white`:`text-bambu-gray`}`,children:r(`haSensors.notifyOnAlert`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between pt-2`,children:[o?(0,G.jsx)(Q,{type:`button`,variant:`danger`,onClick:()=>ve.mutate(),disabled:we,children:r(`common.delete`)}):(0,G.jsx)(`span`,{}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:n,disabled:we,children:r(`common.cancel`)}),(0,G.jsxs)(Q,{type:`submit`,disabled:we||!oe&&!o,children:[we?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Kl,{className:`w-4 h-4`}),r(`common.save`)]})]})]})]})]})}),L&&z&&(0,G.jsx)(rf,{title:r(`locationHaSensors.overwriteConfirm.title`),message:r(`locationHaSensors.overwriteConfirm.message${G8(z.device_class)===`humidity`?`Humidity`:G8(z.device_class)===`battery`?`Battery`:`Temperature`}`,{location:Te?.name??``,name:z.name}),variant:`warning`,overlayZIndex:`z-[110]`,isLoading:ye.isPending,onConfirm:()=>ye.mutate(),onCancel:()=>{R(!1),B(null)}}),V&&te.length>0&&(0,G.jsx)(rf,{title:r(`locationHaSensors.autoAdd.confirmTitle`),message:r(`locationHaSensors.autoAdd.confirmMessage`),overlayZIndex:`z-[110]`,isLoading:_e.isPending,confirmDisabled:!te.some(e=>re[e.entity_id]),onConfirm:()=>_e.mutate(),cancelText:r(`locationHaSensors.autoAdd.onlyThisOne`),onCancel:()=>{ee(!1),ne([]),ie({}),ge.mutate()},children:(0,G.jsx)(`div`,{className:`space-y-2`,children:te.map(e=>(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:re[e.entity_id]??!0,onChange:t=>ie(n=>({...n,[e.entity_id]:t.target.checked})),className:`w-4 h-4`}),(0,G.jsxs)(`span`,{className:`text-sm text-white`,children:[e.friendly_name,(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[` — `,e.entity_id]})]})]},e.entity_id))})}),F&&(0,G.jsx)(QUe,{open:F,onClose:()=>I(!1),onPickLocation:e=>{c(e),I(!1)},startCreating:!0})]})}var q8=60,tWe=120,nWe={temperature:ju,humidity:Zs,battery:Wo},rWe={temperature:`°C`,humidity:`%`,battery:`%`};function iWe(e){return e===`temperature`?`temperature`:e===`humidity`?`humidity`:e===`battery`?`battery`:null}function J8({category:e,state:t,onChange:n}){let{t:r}=U(),i=nWe[e],a=rWe[e],o=t.alertAbove!==``||t.alertBelow!==``;return(0,G.jsxs)(`div`,{className:`p-3 border border-bambu-dark-tertiary rounded-lg space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-sm text-white font-medium`,children:[(0,G.jsx)(i,{className:`w-4 h-4`}),r(`inventory.${e}`)]}),e===`battery`?(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`span`,{className:`block text-xs text-bambu-gray mb-1`,children:[r(`haSensors.alertBelow`),` `,a]}),(0,G.jsx)(`input`,{type:`number`,step:`any`,value:t.alertBelow,onChange:e=>n({alertBelow:e.target.value}),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`})]}):(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`span`,{className:`block text-xs text-bambu-gray mb-1`,children:[r(`haSensors.alertAbove`),` `,a]}),(0,G.jsx)(`input`,{type:`number`,step:`any`,value:t.alertAbove,onChange:e=>n({alertAbove:e.target.value}),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`span`,{className:`block text-xs text-bambu-gray mb-1`,children:[r(`haSensors.alertBelow`),` `,a]}),(0,G.jsx)(`input`,{type:`number`,step:`any`,value:t.alertBelow,onChange:e=>n({alertBelow:e.target.value}),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:t.showOnCard,onChange:e=>n({showOnCard:e.target.checked}),className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:r(`locationHaSensors.showOnCard`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:t.notifyOnAlert,onChange:e=>n({notifyOnAlert:e.target.checked}),disabled:!o,className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-sm ${o?`text-white`:`text-bambu-gray`}`,children:r(`haSensors.notifyOnAlert`)})]})]})}function aWe({onClose:e}){let{t}=U(),{showToast:n}=Gd(),r=co(),[i,a]=(0,y.useState)(()=>A8()),[o,s]=(0,y.useState)(()=>M8()),[c,l]=(0,y.useState)(()=>vUe()),[u,d]=(0,y.useState)(()=>bUe()),[f,p]=(0,y.useState)(()=>SUe()),[m,h]=(0,y.useState)(!1),{data:g}=K({queryKey:[`settings`],queryFn:Z.getSettings}),[_,v]=(0,y.useState)(tWe),b=(0,y.useRef)(!1),x=(0,y.useRef)(new Set);(0,y.useEffect)(()=>{if(!g||b.current)return;b.current=!0,x.current.has(`pollInterval`)||v(g.location_sensor_poll_interval);let e=A8(g.location_sensor_alert_defaults);a(t=>{let n={...e};return Object.keys(n).forEach(e=>{x.current.has(e)&&(n[e]=t[e])}),n})},[g]);let S=(e,t)=>{x.current.add(e),a(n=>({...n,[e]:{...n[e],...t}}))},C=e=>{x.current.add(`pollInterval`),v(e)},w=async()=>{let e=Math.max(q8,_),t=hUe({...i,battery:{...i.battery,alertAbove:``}}),n={};g&&e!==g.location_sensor_poll_interval&&(n.location_sensor_poll_interval=e),g&&t!==g.location_sensor_alert_defaults&&(n.location_sensor_alert_defaults=t),Object.keys(n).length>0&&(await Z.updateSettings(n),r.invalidateQueries({queryKey:[`settings`]})),gUe(i),_Ue(o),yUe(c),xUe(u),CUe(f)},T=q({mutationFn:w,onSuccess:()=>{n(t(`locationHaSensors.options.saved`),`success`),e()},onError:e=>{n(e.message||t(`locationHaSensors.options.saveFailed`),`error`)}}),E=e=>{e.preventDefault(),T.mutate()},D=q({mutationFn:async()=>{let[e,t]=await Promise.all([Z.getLocationHASensors(),Z.getBindableLocationHAEntities()]),n=new Map(t.map(e=>[e.entity_id,e.friendly_name])),r=e.filter(e=>iWe(e.device_class)!==null);return await Promise.all(r.map(e=>{let t=iWe(e.device_class),r=i[t],a=n.get(e.entity_id);return Z.updateLocationHASensor(e.id,{...a?{name:a.slice(0,100)}:{},alert_above:t!==`battery`&&r.alertAbove!==``?Number(r.alertAbove):null,alert_below:r.alertBelow===``?null:Number(r.alertBelow),notify_on_alert:r.notifyOnAlert,show_on_card:r.showOnCard})})),await w(),r.length},onSuccess:i=>{r.invalidateQueries({queryKey:[`locationHaSensors`]}),r.invalidateQueries({queryKey:[`locationHaSensorReadings`]}),n(t(`locationHaSensors.options.resetDone`,{count:i}),`success`),h(!1),e()},onError:e=>{n(e.message||t(`locationHaSensors.options.resetFailed`),`error`),h(!1)}});return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:e,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-lg max-h-[90vh] overflow-y-auto`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-full bg-bambu-green/20 text-bambu-green`,children:(0,G.jsx)(tu,{className:`w-5 h-5`})}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:t(`locationHaSensors.options.title`)})]}),(0,G.jsx)(`button`,{onClick:e,className:`text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`form`,{onSubmit:E,className:`px-6 pb-6 pt-3 space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:t(`locationHaSensors.options.description`)}),(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsx)(J8,{category:`temperature`,state:i.temperature,onChange:e=>S(`temperature`,e)}),(0,G.jsx)(J8,{category:`humidity`,state:i.humidity,onChange:e=>S(`humidity`,e)}),(0,G.jsx)(J8,{category:`battery`,state:i.battery,onChange:e=>S(`battery`,e)})]}),(0,G.jsxs)(`div`,{className:`p-3 border border-bambu-dark-tertiary rounded-lg space-y-3`,children:[(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:o,onChange:e=>s(e.target.checked),className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:t(`locationHaSensors.options.colorizeValues`)})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-3 gap-x-3 gap-y-1 items-end ${o?``:`opacity-50`}`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray`,htmlFor:`location-sensor-below-color`,children:t(`locationHaSensors.options.belowColor`)}),(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray`,htmlFor:`location-sensor-optimal-color`,children:t(`locationHaSensors.options.optimalColor`)}),(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray`,htmlFor:`location-sensor-above-color`,children:t(`locationHaSensors.options.aboveColor`)}),(0,G.jsx)(`select`,{id:`location-sensor-below-color`,value:u,onChange:e=>d(e.target.value),disabled:!o,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white disabled:cursor-not-allowed`,children:F8.map(e=>(0,G.jsx)(`option`,{value:e,children:t(`locationHaSensors.options.colors.${e}`)},e))}),(0,G.jsx)(`select`,{id:`location-sensor-optimal-color`,value:f,onChange:e=>p(e.target.value),disabled:!o,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white disabled:cursor-not-allowed`,children:F8.map(e=>(0,G.jsx)(`option`,{value:e,children:t(`locationHaSensors.options.colors.${e}`)},e))}),(0,G.jsx)(`select`,{id:`location-sensor-above-color`,value:c,onChange:e=>l(e.target.value),disabled:!o,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white disabled:cursor-not-allowed`,children:F8.map(e=>(0,G.jsx)(`option`,{value:e,children:t(`locationHaSensors.options.colors.${e}`)},e))})]})]}),(0,G.jsx)(`div`,{className:`pt-4 mt-4 border-t border-bambu-dark-tertiary`,children:(0,G.jsx)(`p`,{className:`text-xs font-medium text-bambu-gray uppercase tracking-wider mb-3`,children:t(`locationHaSensors.options.generalSettings`)})}),(0,G.jsxs)(`div`,{className:`p-3 border border-bambu-dark-tertiary rounded-lg space-y-2`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-white`,htmlFor:`location-sensor-poll-interval`,children:t(`locationHaSensors.options.pollInterval`)}),(0,G.jsx)(`input`,{id:`location-sensor-poll-interval`,type:`number`,min:q8,step:`1`,value:_,onChange:e=>C(Number(e.target.value)),onBlur:()=>C(Math.max(q8,_||tWe)),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:t(`locationHaSensors.options.pollIntervalHint`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2 pt-2`,children:[(0,G.jsxs)(Q,{type:`button`,variant:`secondary`,onClick:()=>h(!0),children:[(0,G.jsx)(Ul,{className:`w-4 h-4`}),t(`locationHaSensors.options.reset`)]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:e,children:t(`common.cancel`)}),(0,G.jsxs)(Q,{type:`submit`,disabled:T.isPending,children:[(0,G.jsx)(Kl,{className:`w-4 h-4`}),t(`common.save`)]})]})]})]})]})}),m&&(0,G.jsx)(rf,{title:t(`locationHaSensors.options.resetConfirm.title`),message:t(`locationHaSensors.options.resetConfirm.message`),confirmText:t(`locationHaSensors.options.reset`),variant:`danger`,overlayZIndex:`z-[60]`,isLoading:D.isPending,onConfirm:()=>D.mutate(),onCancel:()=>h(!1)})]})}function oWe({provider:e,onEdit:t}){let{t:n}=U(),r=co(),[i,a]=(0,y.useState)(!1),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(null),{data:u}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),d=u?.find(t=>t.id===e.printer_id),f=q({mutationFn:t=>Z.updateNotificationProvider(e.id,t),onSuccess:()=>{r.invalidateQueries({queryKey:[`notification-providers`]})}}),p=q({mutationFn:()=>Z.deleteNotificationProvider(e.id),onSuccess:()=>{r.invalidateQueries({queryKey:[`notification-providers`]})}}),m=q({mutationFn:()=>Z.testNotificationProvider(e.id),onSuccess:e=>{l(e),r.invalidateQueries({queryKey:[`notification-providers`]})},onError:e=>{l({success:!1,message:e.message})}}),h=e=>e||``;return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ld,{className:`relative`,children:(0,G.jsxs)(zd,{className:`p-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between ${e.enabled?`mb-3`:`mb-0`}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg ${e.enabled?`bg-bambu-green/20`:`bg-bambu-dark`}`,children:(0,G.jsx)(qo,{className:`w-5 h-5 ${e.enabled?`text-bambu-green`:`text-bambu-gray`}`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`font-medium text-white`,children:e.name}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`notifications.providerTypes.${e.provider_type}`,e.provider_type)})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[e.last_success&&(0,G.jsx)(`span`,{className:`text-xs text-status-ok hidden sm:inline`,children:n(`notifications.lastSuccess`,{date:np(e.last_success)})}),e.last_error&&e.last_error_at&&(!e.last_success||(ep(e.last_error_at)?.getTime()||0)>(ep(e.last_success)?.getTime()||0))&&(0,G.jsx)(`span`,{className:`text-xs text-status-error`,title:e.last_error,children:n(`notifications.error`)}),(0,G.jsx)(hU,{checked:e.enabled,onChange:e=>f.mutate({enabled:e})})]})]}),e.enabled&&(0,G.jsxs)(G.Fragment,{children:[d&&(0,G.jsxs)(`div`,{className:`mb-3 px-2 py-1.5 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[n(`notifications.printer`),` `]}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:d.name})]}),!d&&!e.printer_id&&(0,G.jsx)(`div`,{className:`mb-3 px-2 py-1.5 bg-bambu-dark rounded-lg`,children:(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:n(`notifications.allPrinters`)})}),(0,G.jsxs)(`div`,{className:`mb-3 flex flex-wrap gap-1`,children:[e.on_print_start&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400 text-xs rounded`,children:n(`notifications.start`)}),e.on_plate_not_empty&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-rose-100 dark:bg-rose-600/20 text-rose-700 dark:text-rose-300 text-xs rounded`,children:n(`notifications.plateCheck`)}),e.on_print_complete&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-bambu-green/20 text-bambu-green text-xs rounded`,children:n(`notifications.complete`)}),e.on_plate_clear_required&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400 text-xs rounded`,children:n(`notifications.plateClear`)}),e.on_print_failed&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400 text-xs rounded`,children:n(`notifications.failed`)}),e.on_print_stopped&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-orange-100 dark:bg-orange-500/20 text-orange-700 dark:text-orange-400 text-xs rounded`,children:n(`notifications.stopped`)}),e.on_billing_charge_failed&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-red-100 dark:bg-red-600/20 text-red-700 dark:text-red-300 text-xs rounded`,children:n(`notifications.billingChargeFailedLabel`)}),e.on_print_progress&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400 text-xs rounded`,children:n(`notifications.progress`)}),e.on_printer_offline&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-gray-500/20 text-gray-400 text-xs rounded`,children:n(`notifications.offline`)}),e.on_printer_error&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-rose-100 dark:bg-rose-500/20 text-rose-700 dark:text-rose-400 text-xs rounded`,children:n(`notifications.error`)}),e.on_ai_failure_detection&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-fuchsia-100 dark:bg-fuchsia-500/20 text-fuchsia-700 dark:text-fuchsia-300 text-xs rounded`,children:n(`notifications.aiFailureDetection`)}),e.on_ha_sensor_alert&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-indigo-100 dark:bg-indigo-500/20 text-indigo-700 dark:text-indigo-300 text-xs rounded`,children:n(`notifications.haSensorAlert`)}),e.on_location_ha_sensor_alert&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-indigo-100 dark:bg-indigo-500/20 text-indigo-700 dark:text-indigo-300 text-xs rounded`,children:n(`notifications.locationHaSensorAlert`)}),e.on_filament_low&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-cyan-100 dark:bg-cyan-500/20 text-cyan-700 dark:text-cyan-400 text-xs rounded`,children:n(`notifications.lowFilament`)}),e.on_maintenance_due&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-400 text-xs rounded`,children:n(`notifications.maintenance`)}),e.on_ams_humidity_high&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-blue-100 dark:bg-blue-600/20 text-blue-700 dark:text-blue-300 text-xs rounded`,children:n(`notifications.amsHumidity`)}),e.on_ams_temperature_high&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-orange-100 dark:bg-orange-600/20 text-orange-700 dark:text-orange-300 text-xs rounded`,children:n(`notifications.amsTemp`)}),e.on_ams_drying_suspended&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-rose-100 dark:bg-rose-600/20 text-rose-700 dark:text-rose-300 text-xs rounded`,children:n(`notifications.amsDryingSuspended`)}),e.on_ams_ht_humidity_high&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-cyan-100 dark:bg-cyan-600/20 text-cyan-700 dark:text-cyan-300 text-xs rounded`,children:n(`notifications.amsHtHumidity`)}),e.on_ams_ht_temperature_high&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-amber-100 dark:bg-amber-600/20 text-amber-700 dark:text-amber-300 text-xs rounded`,children:n(`notifications.amsHtTemp`)}),e.on_bed_cooled&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-teal-100 dark:bg-teal-500/20 text-teal-700 dark:text-teal-400 text-xs rounded`,children:n(`notifications.bedCooled`)}),e.on_first_layer_complete&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-emerald-100 dark:bg-emerald-600/20 text-emerald-700 dark:text-emerald-300 text-xs rounded`,children:n(`notifications.firstLayer`)}),e.on_print_missing_spool_assignment&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-300 text-xs rounded`,children:n(`notifications.missingSpoolAssignmentLabel`)}),e.on_stock_reorder_alert&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-lime-100 dark:bg-lime-500/20 text-lime-700 dark:text-lime-400 text-xs rounded`,children:n(`notifications.stockReorderAlert`)}),e.on_stock_break_alert&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-red-100 dark:bg-red-600/20 text-red-700 dark:text-red-300 text-xs rounded`,children:n(`notifications.stockBreakAlert`)}),e.quiet_hours_enabled&&(0,G.jsxs)(`span`,{className:`px-2 py-0.5 bg-indigo-100 dark:bg-indigo-500/20 text-indigo-700 dark:text-indigo-400 text-xs rounded flex items-center gap-1`,children:[(0,G.jsx)(gl,{className:`w-3 h-3`}),n(`notifications.quiet`)]}),e.daily_digest_enabled&&(0,G.jsxs)(`span`,{className:`px-2 py-0.5 bg-emerald-100 dark:bg-emerald-500/20 text-emerald-700 dark:text-emerald-400 text-xs rounded flex items-center gap-1`,children:[(0,G.jsx)(as,{className:`w-3 h-3`}),n(`notifications.digest`,{time:e.daily_digest_time})]})]}),(0,G.jsx)(`div`,{className:`mb-3`,children:(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,disabled:m.isPending,onClick:()=>{l(null),m.mutate()},className:`w-full`,children:[m.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Ql,{className:`w-4 h-4`}),n(`notifications.sendTestNotification`)]})}),c&&(0,G.jsxs)(`div`,{className:`mb-3 p-2 rounded-lg flex items-center gap-2 text-sm ${c.success?`bg-bambu-green/20 text-bambu-green`:`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`}`,children:[c.success?(0,G.jsx)(xs,{className:`w-4 h-4`}):(0,G.jsx)(Ds,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:c.message})]})]}),(0,G.jsxs)(`button`,{onClick:()=>s(!o),className:`w-full flex items-center justify-between py-2 text-sm text-bambu-gray hover:text-white transition-colors ${e.enabled?`border-t border-bambu-dark-tertiary`:`mt-2 border-t border-bambu-dark-tertiary`}`,children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(tu,{className:`w-4 h-4`}),n(`notifications.eventSettings`)]}),o?(0,G.jsx)(gs,{className:`w-4 h-4`}):(0,G.jsx)(ps,{className:`w-4 h-4`})]}),o&&(0,G.jsxs)(`div`,{className:`pt-3 border-t border-bambu-dark-tertiary space-y-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.enabled`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.sendFromProvider`)})]}),(0,G.jsx)(hU,{checked:e.enabled,onChange:e=>f.mutate({enabled:e})})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase tracking-wide`,children:n(`notifications.printEvents`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.printStarted`)}),(0,G.jsx)(hU,{checked:e.on_print_start,onChange:e=>f.mutate({on_print_start:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.plateNotEmpty`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.plateNotEmptyDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_plate_not_empty??!0,onChange:e=>f.mutate({on_plate_not_empty:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.printCompleted`)}),(0,G.jsx)(hU,{checked:e.on_print_complete,onChange:e=>f.mutate({on_print_complete:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.plateClearRequired`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.plateClearRequiredDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_plate_clear_required??!1,onChange:e=>f.mutate({on_plate_clear_required:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.bedCooledLabel`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.bedCooledDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_bed_cooled??!1,onChange:e=>f.mutate({on_bed_cooled:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.firstLayerCompleteLabel`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.firstLayerCompleteDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_first_layer_complete??!1,onChange:e=>f.mutate({on_first_layer_complete:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.missingSpoolAssignmentLabel`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.missingSpoolAssignmentDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_print_missing_spool_assignment??!1,onChange:e=>f.mutate({on_print_missing_spool_assignment:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.printFailed`)}),(0,G.jsx)(hU,{checked:e.on_print_failed,onChange:e=>f.mutate({on_print_failed:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.printStopped`)}),(0,G.jsx)(hU,{checked:e.on_print_stopped,onChange:e=>f.mutate({on_print_stopped:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.billingChargeFailedLabel`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.billingChargeFailedDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_billing_charge_failed??!0,onChange:e=>f.mutate({on_billing_charge_failed:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.progressMilestones`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.progressMilestonesDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_print_progress,onChange:e=>f.mutate({on_print_progress:e})})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase tracking-wide`,children:n(`notifications.printerStatus`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.printerOffline`)}),(0,G.jsx)(hU,{checked:e.on_printer_offline,onChange:e=>f.mutate({on_printer_offline:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.printerError`)}),(0,G.jsx)(hU,{checked:e.on_printer_error,onChange:e=>f.mutate({on_printer_error:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.aiFailureDetection`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.aiFailureDetectionDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_ai_failure_detection??!1,onChange:e=>f.mutate({on_ai_failure_detection:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.haSensorAlert`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.haSensorAlertDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_ha_sensor_alert??!1,onChange:e=>f.mutate({on_ha_sensor_alert:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.locationHaSensorAlert`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.locationHaSensorAlertDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_location_ha_sensor_alert??!1,onChange:e=>f.mutate({on_location_ha_sensor_alert:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.lowFilamentLabel`)}),(0,G.jsx)(hU,{checked:e.on_filament_low,onChange:e=>f.mutate({on_filament_low:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.maintenanceDue`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.maintenanceDueDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_maintenance_due??!1,onChange:e=>f.mutate({on_maintenance_due:e})})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase tracking-wide`,children:n(`notifications.amsAlarms`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.amsHumidityHigh`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.amsHumidityHighDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_ams_humidity_high??!1,onChange:e=>f.mutate({on_ams_humidity_high:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.amsTemperatureHigh`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.amsTemperatureHighDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_ams_temperature_high??!1,onChange:e=>f.mutate({on_ams_temperature_high:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.amsDryingSuspendedTitle`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.amsDryingSuspendedDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_ams_drying_suspended??!1,onChange:e=>f.mutate({on_ams_drying_suspended:e})})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase tracking-wide`,children:n(`notifications.amsHtAlarms`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.amsHtHumidityHigh`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.amsHtHumidityHighDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_ams_ht_humidity_high??!1,onChange:e=>f.mutate({on_ams_ht_humidity_high:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.amsHtTemperatureHigh`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.amsHtTemperatureHighDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_ams_ht_temperature_high??!1,onChange:e=>f.mutate({on_ams_ht_temperature_high:e})})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase tracking-wide`,children:n(`notifications.inventoryAlerts`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.stockReorderAlert`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.stockReorderAlertDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_stock_reorder_alert??!1,onChange:e=>f.mutate({on_stock_reorder_alert:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.stockBreakAlert`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.stockBreakAlertDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_stock_break_alert??!1,onChange:e=>f.mutate({on_stock_break_alert:e})})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase tracking-wide`,children:n(`notifications.printQueue`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.jobAdded`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.jobAddedDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_queue_job_added??!1,onChange:e=>f.mutate({on_queue_job_added:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.jobAssigned`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.jobAssignedDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_queue_job_assigned??!1,onChange:e=>f.mutate({on_queue_job_assigned:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.jobStarted`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.jobStartedDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_queue_job_started??!1,onChange:e=>f.mutate({on_queue_job_started:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.jobWaiting`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.jobWaitingDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_queue_job_waiting??!0,onChange:e=>f.mutate({on_queue_job_waiting:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.jobSkipped`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.jobSkippedDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_queue_job_skipped??!0,onChange:e=>f.mutate({on_queue_job_skipped:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.jobFailed`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.jobFailedDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_queue_job_failed??!0,onChange:e=>f.mutate({on_queue_job_failed:e})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.queueComplete`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.queueCompleteDescription`)})]}),(0,G.jsx)(hU,{checked:e.on_queue_completed??!1,onChange:e=>f.mutate({on_queue_completed:e})})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(gl,{className:`w-4 h-4 text-purple-600 dark:text-purple-400`}),(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.quietHours`)})]}),(0,G.jsx)(hU,{checked:e.quiet_hours_enabled,onChange:e=>f.mutate({quiet_hours_enabled:e})})]}),e.quiet_hours_enabled&&(0,G.jsxs)(`div`,{className:`pl-4 border-l-2 border-bambu-dark-tertiary space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.noNotificationsDuring`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(js,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsxs)(`span`,{className:`text-sm text-white`,children:[h(e.quiet_hours_start)||`22:00`,` - `,h(e.quiet_hours_end)||`07:00`]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.editProviderToChangeQuietHours`)})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(as,{className:`w-4 h-4 text-emerald-600 dark:text-emerald-400`}),(0,G.jsx)(`p`,{className:`text-sm text-white`,children:n(`notifications.dailyDigest`)})]}),(0,G.jsx)(hU,{checked:e.daily_digest_enabled,onChange:e=>f.mutate({daily_digest_enabled:e})})]}),e.daily_digest_enabled&&(0,G.jsxs)(`div`,{className:`pl-4 border-l-2 border-bambu-dark-tertiary space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.batchNotifications`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(js,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.sendAt`,{time:h(e.daily_digest_time)||`08:00`})})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.editProviderToChangeDigestTime`)})]})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 pt-2`,children:[(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>t(e),className:`flex-1`,children:[(0,G.jsx)(Ol,{className:`w-4 h-4`}),n(`notifications.edit`)]}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>a(!0),className:`text-red-700 dark:text-red-400 hover:text-red-800 dark:hover:text-red-300`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})]})]})}),i&&(0,G.jsx)(rf,{title:n(`notifications.deleteProvider`),message:n(`notifications.deleteConfirm`,{name:e.name}),confirmText:n(`notifications.delete`),variant:`danger`,onConfirm:()=>{p.mutate(),a(!1)},onCancel:()=>a(!1)})]})}var sWe=[`email`,`telegram`,`discord`,`ntfy`,`pushover`,`bark`,`callmebot`,`webhook`,`homeassistant`];function cWe({provider:e,onClose:t}){let{t:n}=U(),r=co(),i=!!e,[a,o]=(0,y.useState)(e?.name||``),[s,c]=(0,y.useState)(e?.provider_type||`email`),[l,u]=(0,y.useState)(e?.printer_id||null),[d,f]=(0,y.useState)(e?.quiet_hours_enabled||!1),[p,m]=(0,y.useState)(e?.quiet_hours_start||`22:00`),[h,g]=(0,y.useState)(e?.quiet_hours_end||`07:00`),[_,v]=(0,y.useState)(e?.daily_digest_enabled||!1),[b,x]=(0,y.useState)(e?.daily_digest_time||`08:00`),[S,C]=(0,y.useState)(e?.on_print_start??!1),[w,T]=(0,y.useState)(e?.on_print_complete??!0),[E,D]=(0,y.useState)(e?.on_print_failed??!0),[O,k]=(0,y.useState)(e?.on_print_stopped??!0),[A,j]=(0,y.useState)(e?.on_print_progress??!1),[M,N]=(0,y.useState)(e?.on_billing_charge_failed??!0),[P,F]=(0,y.useState)(e?.on_printer_offline??!1),[I,L]=(0,y.useState)(e?.on_printer_error??!1),[R,z]=(0,y.useState)(e?.on_ai_failure_detection??!1),[B,V]=(0,y.useState)(e?.on_filament_low??!1),[ee,te]=(0,y.useState)(e?.on_maintenance_due??!1),[ne,re]=(0,y.useState)(e?.on_stock_reorder_alert??!1),[ie,ae]=(0,y.useState)(e?.on_stock_break_alert??!1),[oe,se]=(0,y.useState)(e?.on_plate_clear_required??!1),[H,ce]=(0,y.useState)(e?.on_bed_cooled??!1),[le,ue]=(0,y.useState)(e?.on_ha_sensor_alert??!1),[de,fe]=(0,y.useState)(e?.on_location_ha_sensor_alert??!1),[pe,me]=(0,y.useState)(e?.on_first_layer_complete??!1),[he,ge]=(0,y.useState)(e?.config?Object.fromEntries(Object.entries(e.config).filter(([e])=>e!==`event_priorities`).map(([e,t])=>[e,String(t)])):{}),[_e,ve]=(0,y.useState)((()=>{let t=e?.config?.event_priorities;if(!t||typeof t!=`object`)return{};let n={};for(let[e,r]of Object.entries(t)){let t=Number(r);Number.isInteger(t)&&t>=1&&t<=5&&(n[e]=t)}return n})()),[ye,be]=(0,y.useState)(null),[xe,Se]=(0,y.useState)(null),{data:Ce}=K({queryKey:[`printers`],queryFn:Z.getPrinters});(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&t()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[t]);let we=q({mutationFn:()=>Z.testNotificationConfig({provider_type:s,config:he}),onSuccess:e=>{be(e),Se(null)},onError:e=>{be({success:!1,message:e.message})}}),Te=q({mutationFn:e=>Z.createNotificationProvider(e),onSuccess:()=>{r.invalidateQueries({queryKey:[`notification-providers`]}),t()},onError:e=>{Se(e.message)}}),Ee=q({mutationFn:t=>Z.updateNotificationProvider(e.id,t),onSuccess:()=>{r.invalidateQueries({queryKey:[`notification-providers`]}),t()},onError:e=>{Se(e.message)}}),De=e=>{if(e.preventDefault(),Se(null),!a.trim()){Se(n(`notifications.nameRequired`));return}let t=Ae(s);for(let e of t)if(!he[e.key]?.trim()){Se(n(`notifications.fieldRequired`,{field:e.label}));return}if(s===`homeassistant`&&he.data?.trim()){let e;try{e=JSON.parse(he.data)}catch{Se(n(`notifications.haDataInvalid`));return}if(typeof e!=`object`||!e||Array.isArray(e)){Se(n(`notifications.haDataInvalid`));return}}if(s===`telegram`&&he.message_thread_id?.trim()&&!/^\d+$/.test(he.message_thread_id.trim())){Se(n(`notifications.telegramThreadIdInvalid`));return}let r=s===`ntfy`&&Object.keys(_e).length>0?{...he,event_priorities:_e}:he,o={name:a.trim(),provider_type:s,config:r,printer_id:l,quiet_hours_enabled:d,quiet_hours_start:d?p:null,quiet_hours_end:d?h:null,daily_digest_enabled:_,daily_digest_time:_?b:null,on_print_start:S,on_print_complete:w,on_print_failed:E,on_print_stopped:O,on_print_progress:A,on_billing_charge_failed:M,on_printer_offline:P,on_printer_error:I,on_ai_failure_detection:R,on_filament_low:B,on_maintenance_due:ee,on_stock_reorder_alert:ne,on_stock_break_alert:ie,on_plate_clear_required:oe,on_bed_cooled:H,on_ha_sensor_alert:le,on_location_ha_sensor_alert:de,on_first_layer_complete:pe};i?Ee.mutate(o):Te.mutate(o)},Oe=Te.isPending||Ee.isPending,ke=e=>{switch(e){case`callmebot`:return[{key:`phone`,label:`Phone Number`,placeholder:`+1234567890`,type:`text`,required:!0},{key:`apikey`,label:`API Key`,placeholder:`Your CallMeBot API key`,type:`text`,required:!0}];case`ntfy`:return[{key:`server`,label:`Server URL`,placeholder:`https://ntfy.sh`,type:`text`,required:!1},{key:`topic`,label:`Topic`,placeholder:`my-bambuddy`,type:`text`,required:!0},{key:`auth_token`,label:`Auth Token`,placeholder:`Optional authentication`,type:`password`,required:!1}];case`pushover`:return[{key:`user_key`,label:`User Key`,placeholder:`Your Pushover user key`,type:`text`,required:!0},{key:`app_token`,label:`App Token`,placeholder:`Your Pushover app token`,type:`text`,required:!0},{key:`priority`,label:`Priority`,placeholder:`0 (normal)`,type:`number`,required:!1},{key:`retry`,label:n(`notifications.pushoverRetry`),placeholder:`60`,type:`number`,required:!1,showIf:e=>e.priority===`2`},{key:`expire`,label:n(`notifications.pushoverExpire`),placeholder:`3600`,type:`number`,required:!1,showIf:e=>e.priority===`2`}];case`telegram`:return[{key:`bot_token`,label:`Bot Token`,placeholder:`Bot token from @BotFather`,type:`password`,required:!0},{key:`chat_id`,label:`Chat ID`,placeholder:`Your chat or group ID`,type:`text`,required:!0},{key:`message_thread_id`,label:n(`notifications.telegramThreadId`),placeholder:`123`,type:`number`,required:!1,help:n(`notifications.telegramThreadIdHelp`)}];case`email`:return[{key:`smtp_server`,label:`SMTP Server`,placeholder:`smtp.gmail.com`,type:`text`,required:!0},{key:`smtp_port`,label:`SMTP Port`,placeholder:`587`,type:`number`,required:!1},{key:`security`,label:`Security`,type:`select`,required:!1,options:[{value:`starttls`,label:`STARTTLS (Port 587)`},{value:`ssl`,label:`SSL/TLS (Port 465)`},{value:`none`,label:`None (Port 25)`}]},{key:`auth_enabled`,label:`Authentication`,type:`select`,required:!1,options:[{value:`true`,label:`Enabled`},{value:`false`,label:`Disabled`}]},{key:`username`,label:`Username`,placeholder:`your@email.com`,type:`text`,required:!1},{key:`password`,label:`Password`,placeholder:`App password`,type:`password`,required:!1},{key:`from_email`,label:`From Email`,placeholder:`your@email.com`,type:`text`,required:!0},{key:`to_email`,label:`To Email`,placeholder:`recipient@email.com`,type:`text`,required:!0}];case`discord`:return[{key:`webhook_url`,label:`Webhook URL`,placeholder:`https://discord.com/api/webhooks/...`,type:`text`,required:!0}];case`webhook`:return[{key:`webhook_url`,label:`Webhook URL`,placeholder:`https://example.com/webhook`,type:`text`,required:!0},{key:`payload_format`,label:`Payload Format`,type:`select`,required:!1,options:[{value:`generic`,label:`Generic JSON`},{value:`slack`,label:`Slack / Mattermost`}]},{key:`auth_header`,label:`Authorization`,placeholder:`Bearer token (optional)`,type:`password`,required:!1},{key:`field_title`,label:`Title Field Name`,placeholder:`title`,type:`text`,required:!1,showIf:e=>e.payload_format!==`slack`},{key:`field_message`,label:`Message Field Name`,placeholder:`message`,type:`text`,required:!1,showIf:e=>e.payload_format!==`slack`}];case`homeassistant`:return[{key:`service`,label:`Home Assistant Service`,placeholder:`notify.mobile_app_myphone`,type:`text`,required:!1},{key:`data`,label:`Data (JSON, optional)`,placeholder:`{"priority": "high", "ttl": 0, "channel": "3D Printing"}`,type:`textarea`,required:!1}];case`bark`:return[{key:`device_key`,label:`Device Key`,placeholder:`Your Bark device key`,type:`text`,required:!0},{key:`server`,label:`Server URL`,placeholder:`https://api.day.app`,type:`text`,required:!1},{key:`group`,label:`Group`,placeholder:`Bambuddy`,type:`text`,required:!1},{key:`sound`,label:`Sound`,placeholder:`minuet`,type:`text`,required:!1},{key:`level`,label:`Interruption Level`,type:`select`,required:!1,options:[{value:``,label:`Default`},{value:`active`,label:`Active`},{value:`timeSensitive`,label:`Time Sensitive`},{value:`critical`,label:`Critical (bypasses Silent/Focus)`},{value:`passive`,label:`Passive (no sound)`}]}];default:return[]}},Ae=e=>ke(e).filter(e=>e.required),je=ke(s);return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4 overflow-y-auto`,onClick:t,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-lg my-8 max-h-[90vh] overflow-y-auto`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:n(i?`notifications.editTitle`:`notifications.addTitle`)}),(0,G.jsx)(`button`,{onClick:t,className:`text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`form`,{onSubmit:De,className:`p-6 space-y-4`,children:[xe&&(0,G.jsx)(`div`,{className:`p-3 bg-red-100 dark:bg-red-500/20 border border-red-300 dark:border-red-500/50 rounded-lg text-sm text-red-700 dark:text-red-400`,children:xe}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`notifications.nameLabel`)}),(0,G.jsx)(`input`,{type:`text`,value:a,onChange:e=>o(e.target.value),placeholder:n(`notifications.namePlaceholder`),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`notifications.providerTypeLabel`)}),(0,G.jsx)(`select`,{value:s,onChange:e=>{c(e.target.value),ge({}),be(null)},disabled:i,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none disabled:opacity-50`,children:sWe.map(e=>(0,G.jsx)(`option`,{value:e,children:n(`notifications.providerTypes.${e}`,e)},e))}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(`notifications.providerDescriptions.${s}`,``)})]}),(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`notifications.configuration`)}),je.filter(e=>!(`showIf`in e)||e.showIf?.(he)!==!1).map(e=>(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[e.label,` `,e.required&&`*`]}),e.type===`select`&&`options`in e&&e.options?(0,G.jsx)(`select`,{value:he[e.key]||e.options[0]?.value||``,onChange:t=>{ge({...he,[e.key]:t.target.value}),be(null)},className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:e.options.map(e=>(0,G.jsx)(`option`,{value:e.value,children:e.label},e.value))}):e.type===`textarea`?(0,G.jsx)(`textarea`,{value:he[e.key]||``,onChange:t=>{ge({...he,[e.key]:t.target.value}),be(null)},placeholder:e.placeholder,rows:3,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none font-mono text-sm`}):(0,G.jsx)(`input`,{type:e.type,value:he[e.key]||``,onChange:t=>{ge({...he,[e.key]:t.target.value}),be(null)},placeholder:e.placeholder,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),`help`in e&&e.help&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e.help})]},e.key))]}),(0,G.jsx)(`div`,{className:`flex gap-2`,children:(0,G.jsxs)(Q,{type:`button`,variant:`secondary`,onClick:()=>{be(null),we.mutate()},disabled:we.isPending||Ae(s).length>0&&!he[Ae(s)[0]?.key],className:`flex-1`,children:[we.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Ql,{className:`w-4 h-4`}),n(`notifications.testConfiguration`)]})}),ye&&(0,G.jsx)(`div`,{className:`p-3 rounded-lg flex items-center gap-2 ${ye.success?`bg-bambu-green/20 border border-bambu-green/50 text-bambu-green`:`bg-red-100 dark:bg-red-500/20 border border-red-300 dark:border-red-500/50 text-red-700 dark:text-red-400`}`,children:ye.success?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(xs,{className:`w-5 h-5`}),(0,G.jsx)(`span`,{children:ye.message})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ds,{className:`w-5 h-5`}),(0,G.jsx)(`span`,{children:ye.message})]})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`notifications.printerFilter`)}),(0,G.jsxs)(`select`,{value:l??``,onChange:e=>u(e.target.value?Number(e.target.value):null),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:``,children:n(`notifications.allPrinters`)}),Ce?.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(`notifications.onlyFromPrinter`)})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`label`,{className:`text-sm text-white`,children:n(`notifications.quietHoursDnd`)}),(0,G.jsx)(hU,{checked:d,onChange:f})]}),d&&(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:n(`notifications.quietStart`)}),(0,G.jsx)(`input`,{type:`time`,value:p,onChange:e=>m(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:n(`notifications.quietEnd`)}),(0,G.jsx)(`input`,{type:`time`,value:h,onChange:e=>g(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-sm text-white`,children:n(`notifications.dailyDigestLabel`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`notifications.batchNotifications`)})]}),(0,G.jsx)(hU,{checked:_,onChange:v})]}),_&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:n(`notifications.sendDigestAt`)}),(0,G.jsx)(`input`,{type:`time`,value:b,onChange:e=>x(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(`notifications.digestCollected`)})]})]}),(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`notifications.notificationEvents`)}),(0,G.jsxs)(`div`,{className:`space-y-2 p-3 bg-bambu-dark rounded-lg`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase tracking-wide mb-2`,children:n(`notifications.printEvents`)}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.start`)}),(0,G.jsx)(hU,{checked:S,onChange:C})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.complete`)}),(0,G.jsx)(hU,{checked:w,onChange:T})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.failed`)}),(0,G.jsx)(hU,{checked:E,onChange:D})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.stopped`)}),(0,G.jsx)(hU,{checked:O,onChange:k})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between col-span-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.progress`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray ml-1`,children:n(`notifications.progressPercent`)})]}),(0,G.jsx)(hU,{checked:A,onChange:j})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between col-span-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.billingChargeFailedLabel`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray ml-1`,children:n(`notifications.billingChargeFailedDescription`)})]}),(0,G.jsx)(hU,{checked:M,onChange:N})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between col-span-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.plateClearRequired`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray ml-1`,children:n(`notifications.plateClearRequiredDescription`)})]}),(0,G.jsx)(hU,{checked:oe,onChange:se})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between col-span-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.bedCooled`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray ml-1`,children:n(`notifications.bedCooledAfterPrint`)})]}),(0,G.jsx)(hU,{checked:H,onChange:ce})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between col-span-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.firstLayerCompleteLabel`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray ml-1`,children:n(`notifications.firstLayerCompleteDescription`)})]}),(0,G.jsx)(hU,{checked:pe,onChange:me})]})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2 p-3 bg-bambu-dark rounded-lg`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase tracking-wide mb-2`,children:n(`notifications.printerStatus`)}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.offline`)}),(0,G.jsx)(hU,{checked:P,onChange:F})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between col-span-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.haSensorAlert`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray ml-1`,children:n(`notifications.haSensorAlertDescription`)})]}),(0,G.jsx)(hU,{checked:le,onChange:ue})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between col-span-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.locationHaSensorAlert`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray ml-1`,children:n(`notifications.locationHaSensorAlertDescription`)})]}),(0,G.jsx)(hU,{checked:de,onChange:fe})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.error`)}),(0,G.jsx)(hU,{checked:I,onChange:L})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.aiFailureDetection`)}),(0,G.jsx)(hU,{checked:R,onChange:z})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.lowFilament`)}),(0,G.jsx)(hU,{checked:B,onChange:V})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.maintenance`)}),(0,G.jsx)(hU,{checked:ee,onChange:te})]})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2 p-3 bg-bambu-dark rounded-lg`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase tracking-wide mb-2`,children:n(`notifications.inventoryAlerts`)}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.stockReorderAlert`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray ml-1`,children:n(`notifications.stockReorderAlertDescription`)})]}),(0,G.jsx)(hU,{checked:ne,onChange:re})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`notifications.stockBreakAlert`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray ml-1`,children:n(`notifications.stockBreakAlertDescription`)})]}),(0,G.jsx)(hU,{checked:ie,onChange:ae})]})]})]}),s===`ntfy`&&(()=>{let e=[];return S&&e.push({key:`on_print_start`,label:n(`notifications.start`)}),w&&e.push({key:`on_print_complete`,label:n(`notifications.complete`)}),E&&e.push({key:`on_print_failed`,label:n(`notifications.failed`)}),O&&e.push({key:`on_print_stopped`,label:n(`notifications.stopped`)}),A&&e.push({key:`on_print_progress`,label:n(`notifications.progress`)}),M&&e.push({key:`on_billing_charge_failed`,label:n(`notifications.billingChargeFailedLabel`)}),oe&&e.push({key:`on_plate_clear_required`,label:n(`notifications.plateClearRequired`)}),H&&e.push({key:`on_bed_cooled`,label:n(`notifications.bedCooled`)}),pe&&e.push({key:`on_first_layer_complete`,label:n(`notifications.firstLayerCompleteLabel`)}),P&&e.push({key:`on_printer_offline`,label:n(`notifications.offline`)}),I&&e.push({key:`on_printer_error`,label:n(`notifications.error`)}),le&&e.push({key:`on_ha_sensor_alert`,label:n(`notifications.haSensorAlert`)}),de&&e.push({key:`on_location_ha_sensor_alert`,label:n(`notifications.locationHaSensorAlert`)}),R&&e.push({key:`on_ai_failure_detection`,label:n(`notifications.aiFailureDetection`)}),B&&e.push({key:`on_filament_low`,label:n(`notifications.lowFilament`)}),ee&&e.push({key:`on_maintenance_due`,label:n(`notifications.maintenance`)}),ne&&e.push({key:`on_stock_reorder_alert`,label:n(`notifications.stockReorderAlert`)}),ie&&e.push({key:`on_stock_break_alert`,label:n(`notifications.stockBreakAlert`)}),e.length===0?null:(0,G.jsxs)(`div`,{className:`space-y-2 p-3 bg-bambu-dark rounded-lg`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase tracking-wide mb-1`,children:n(`notifications.eventPriority.sectionTitle`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:n(`notifications.eventPriority.helpNtfy`)}),(0,G.jsx)(`div`,{className:`space-y-2`,children:e.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:e.label}),(0,G.jsxs)(`select`,{value:_e[e.key]??3,onChange:t=>{let n=Number(t.target.value);ve(t=>({...t,[e.key]:n}))},className:`px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-sm text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:1,children:n(`notifications.eventPriority.min`)}),(0,G.jsx)(`option`,{value:2,children:n(`notifications.eventPriority.low`)}),(0,G.jsx)(`option`,{value:3,children:n(`notifications.eventPriority.default`)}),(0,G.jsx)(`option`,{value:4,children:n(`notifications.eventPriority.high`)}),(0,G.jsx)(`option`,{value:5,children:n(`notifications.eventPriority.urgent`)})]})]},e.key))})]})})()]}),(0,G.jsxs)(`div`,{className:`flex gap-3 pt-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:t,className:`flex-1`,children:n(`notifications.cancel`)}),(0,G.jsxs)(Q,{type:`submit`,disabled:Oe,className:`flex-1`,children:[Oe?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Kl,{className:`w-4 h-4`}),n(i?`notifications.save`:`notifications.add`)]})]})]})]})})}function lWe({template:e,onClose:t}){let{t:n}=U(),r=co(),i=(0,y.useRef)(null),[a,o]=(0,y.useState)(e.title_template),[s,c]=(0,y.useState)(e.body_template),[l,u]=(0,y.useState)(null),[d,f]=(0,y.useState)(!0),{data:p}=K({queryKey:[`template-variables`],queryFn:Z.getTemplateVariables}),m=p?.find(t=>t.event_type===e.event_type),{data:h,isLoading:g}=K({queryKey:[`template-preview`,e.event_type,a,s],queryFn:()=>Z.previewTemplate({event_type:e.event_type,title_template:a,body_template:s}),enabled:d&&a.length>0&&s.length>0});(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&t()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[t]);let _=q({mutationFn:t=>Z.updateNotificationTemplate(e.id,t),onSuccess:()=>{r.invalidateQueries({queryKey:[`notification-templates`]}),t()},onError:e=>{u(e.message)}}),v=q({mutationFn:()=>Z.resetNotificationTemplate(e.id),onSuccess:e=>{o(e.title_template),c(e.body_template),r.invalidateQueries({queryKey:[`notification-templates`]})},onError:e=>{u(e.message)}}),b=e=>{if(e.preventDefault(),u(null),!a.trim()){u(n(`notifications.titleRequired`));return}if(!s.trim()){u(n(`notifications.bodyRequired`));return}_.mutate({title_template:a,body_template:s})},x=e=>{let t=i.current;if(!t)return;let n=t.selectionStart,r=t.selectionEnd,a=s,o=a.substring(0,n),l=a.substring(r);c(o+`{${e}}`+l),setTimeout(()=>{t.focus();let r=n+e.length+2;t.setSelectionRange(r,r)},0)},S=a!==e.title_template||s!==e.body_template;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/80 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg w-full max-w-2xl max-h-[90vh] flex flex-col`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary shrink-0`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:n(`notifications.editTemplate`,{name:e.name})}),(0,G.jsx)(`button`,{onClick:t,className:`p-1 hover:bg-bambu-dark-tertiary rounded transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5 text-bambu-gray`})})]}),(0,G.jsxs)(`form`,{onSubmit:b,className:`flex-1 overflow-y-auto p-4 space-y-4`,children:[l&&(0,G.jsx)(`div`,{className:`p-3 bg-red-100 dark:bg-red-500/20 border border-red-300 dark:border-red-500/50 rounded text-red-700 dark:text-red-400 text-sm`,children:l}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:n(`notifications.titleLabel`)}),(0,G.jsx)(`input`,{type:`text`,value:a,onChange:e=>o(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white focus:outline-none focus:ring-1 focus:ring-bambu-green`,placeholder:n(`notifications.titlePlaceholder`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:n(`notifications.bodyLabel`)}),(0,G.jsx)(`textarea`,{ref:i,value:s,onChange:e=>c(e.target.value),rows:4,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white focus:outline-none focus:ring-1 focus:ring-bambu-green font-mono text-sm resize-none`,placeholder:n(`notifications.bodyPlaceholder`)})]}),m&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-2`,children:n(`notifications.availableVariables`)}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-2`,children:m.variables.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>x(e),className:`inline-flex items-center gap-1 px-2 py-1 bg-bambu-dark hover:bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded text-xs text-bambu-gray hover:text-white transition-colors`,children:[(0,G.jsx)(Pl,{className:`w-3 h-3`}),e]},e))}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/60 mt-1`,children:n(`notifications.clickToInsert`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsxs)(`label`,{className:`text-sm font-medium text-bambu-gray flex items-center gap-2`,children:[(0,G.jsx)(ic,{className:`w-4 h-4`}),n(`notifications.livePreview`)]}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>f(!d),className:`text-xs text-bambu-green hover:text-bambu-green-light`,children:n(d?`notifications.hide`:`notifications.show`)})]}),d&&(0,G.jsx)(`div`,{className:`bg-bambu-dark border border-bambu-dark-tertiary rounded p-3 space-y-2`,children:g?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray text-sm`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),n(`notifications.loadingPreview`)]}):h?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:n(`notifications.titlePreview`)}),(0,G.jsx)(`div`,{className:`text-white font-medium`,children:h.title})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:n(`notifications.bodyPreview`)}),(0,G.jsx)(`div`,{className:`text-white whitespace-pre-wrap text-sm`,children:h.body})]})]}):(0,G.jsx)(`div`,{className:`text-bambu-gray text-sm`,children:n(`notifications.enterTemplateContent`)})})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-t border-bambu-dark-tertiary shrink-0`,children:[(0,G.jsxs)(Q,{type:`button`,variant:`ghost`,onClick:()=>v.mutate(),disabled:v.isPending,className:`text-orange-600 dark:text-orange-400 hover:text-orange-700 dark:hover:text-orange-300`,children:[v.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin mr-2`}):(0,G.jsx)(Ul,{className:`w-4 h-4 mr-2`}),n(`notifications.resetToDefault`)]}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:t,children:n(`notifications.cancel`)}),(0,G.jsxs)(Q,{onClick:b,disabled:_.isPending||!S,children:[_.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin mr-2`}):(0,G.jsx)(Kl,{className:`w-4 h-4 mr-2`}),n(`notifications.save`)]})]})]})]})})}var uWe={print_start:`text-blue-700 dark:text-blue-400`,print_complete:`text-bambu-green`,print_failed:`text-red-700 dark:text-red-400`,print_stopped:`text-orange-700 dark:text-orange-400`,print_progress:`text-yellow-700 dark:text-yellow-400`,printer_offline:`text-gray-400`,printer_error:`text-rose-700 dark:text-rose-400`,filament_low:`text-cyan-700 dark:text-cyan-400`,maintenance_due:`text-purple-700 dark:text-purple-400`,test:`text-bambu-gray`};function dWe({onClose:e}){let{t}=U(),n=co(),{showToast:r}=Gd(),[i,a]=(0,y.useState)(7),[o,s]=(0,y.useState)(null),[c,l]=(0,y.useState)(!1),{data:u}=K({queryKey:[`settings`],queryFn:Z.getSettings}),d=u?.time_format||`system`,{data:f,isLoading:p,refetch:m,isRefetching:h}=K({queryKey:[`notification-logs`,i,c],queryFn:()=>Z.getNotificationLogs({days:i,limit:100,success:c?!1:void 0})}),{data:g}=K({queryKey:[`notification-log-stats`,i],queryFn:()=>Z.getNotificationLogStats(i)}),_=q({mutationFn:()=>Z.clearNotificationLogs(30),onSuccess:e=>{r(e.message,`success`),n.invalidateQueries({queryKey:[`notification-logs`]}),n.invalidateQueries({queryKey:[`notification-log-stats`]})},onError:e=>{r(`Failed to clear logs: ${e.message}`,`error`)}}),v=e=>{let n=ep(e);if(!n)return``;let r=new Date().getTime()-n.getTime();return r<6e4?t(`notifications.justNow`):r<36e5?`${Math.floor(r/6e4)}m ago`:r<864e5?`${Math.floor(r/36e5)}h ago`:n.toLocaleDateString()+` `+ip(n,d)};return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg w-full max-w-3xl max-h-[85vh] flex flex-col`,children:[(0,G.jsxs)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(Rc,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:t(`notifications.notificationLog`)})]}),(0,G.jsx)(`button`,{onClick:e,className:`text-bambu-gray hover:text-white transition-colors`,children:`×`})]}),g&&(0,G.jsx)(`div`,{className:`px-4 py-3 border-b border-bambu-dark-tertiary bg-bambu-dark/50`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-6 text-sm`,children:[(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[t(`notifications.statsSummary`,{days:i}),` `,(0,G.jsx)(`span`,{className:`text-white font-medium`,children:g.total}),` `,t(`notifications.statsNotifications`)]}),(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-bambu-green`,children:[(0,G.jsx)(xs,{className:`w-4 h-4`}),t(`notifications.statsSent`,{count:g.success_count})]}),g.failure_count>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-red-700 dark:text-red-400`,children:[(0,G.jsx)(Ds,{className:`w-4 h-4`}),t(`notifications.statsFailed`,{count:g.failure_count})]})]})}),(0,G.jsxs)(`div`,{className:`px-4 py-3 border-b border-bambu-dark-tertiary flex items-center gap-4`,children:[(0,G.jsxs)(`select`,{value:i,onChange:e=>a(Number(e.target.value)),className:`px-3 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm focus:outline-none focus:ring-1 focus:ring-bambu-green`,children:[(0,G.jsx)(`option`,{value:1,children:t(`notifications.last24Hours`)}),(0,G.jsx)(`option`,{value:7,children:t(`notifications.last7Days`)}),(0,G.jsx)(`option`,{value:30,children:t(`notifications.last30Days`)}),(0,G.jsx)(`option`,{value:90,children:t(`notifications.last90Days`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 text-sm text-bambu-gray cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:c,onChange:e=>l(e.target.checked),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),t(`notifications.showFailedOnly`)]}),(0,G.jsx)(`div`,{className:`flex-1`}),(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>m(),disabled:h,children:[h?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Vl,{className:`w-4 h-4`}),t(`notifications.refresh`)]}),(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>_.mutate(),disabled:_.isPending,className:`text-red-700 dark:text-red-400 hover:text-red-800 dark:hover:text-red-300`,children:[_.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Nu,{className:`w-4 h-4`}),t(`notifications.clearOld`)]})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto p-4`,children:p?(0,G.jsx)(`div`,{className:`flex justify-center py-12`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})}):f&&f.length>0?(0,G.jsx)(`div`,{className:`space-y-2`,children:f.map(e=>(0,G.jsx)(fWe,{log:e,isExpanded:o===e.id,onToggle:()=>s(o===e.id?null:e.id),formatDate:v,formatFullDate:e=>rp(e,d)},e.id))}):(0,G.jsxs)(`div`,{className:`text-center py-12 text-bambu-gray`,children:[(0,G.jsx)(Rc,{className:`w-12 h-12 mx-auto mb-3 opacity-30`}),(0,G.jsx)(`p`,{className:`text-sm`,children:t(c?`notifications.noFailedNotifications`:`notifications.noNotificationsLogged`)})]})})]})})}function fWe({log:e,isExpanded:t,onToggle:n,formatDate:r,formatFullDate:i}){let{t:a}=U();return(0,G.jsxs)(`div`,{className:`border rounded-lg overflow-hidden transition-colors ${e.success?`border-bambu-dark-tertiary bg-bambu-dark/30`:`border-red-500/30 bg-red-500/5`}`,children:[(0,G.jsxs)(`button`,{className:`w-full px-3 py-2 flex items-center gap-3 text-left hover:bg-bambu-dark/50 transition-colors`,onClick:n,children:[e.success?(0,G.jsx)(xs,{className:`w-4 h-4 text-bambu-green shrink-0`}):(0,G.jsx)(Ds,{className:`w-4 h-4 text-red-600 dark:text-red-400 shrink-0`}),(0,G.jsx)(`span`,{className:`text-xs font-medium ${uWe[e.event_type]||`text-bambu-gray`}`,children:a(`notifications.eventTypes.${e.event_type}`,e.event_type)}),(0,G.jsx)(`span`,{className:`text-sm text-white truncate flex-1`,children:e.provider_name||a(`notifications.unknownProvider`)}),e.printer_name&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:e.printer_name}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray shrink-0`,children:r(e.created_at)}),t?(0,G.jsx)(gs,{className:`w-4 h-4 text-bambu-gray shrink-0`}):(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray shrink-0`})]}),t&&(0,G.jsxs)(`div`,{className:`px-3 py-2 border-t border-bambu-dark-tertiary bg-bambu-dark/20 space-y-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-1`,children:a(`notifications.logTitle`)}),(0,G.jsx)(`p`,{className:`text-sm text-white`,children:e.title})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-1`,children:a(`notifications.logMessage`)}),(0,G.jsx)(`p`,{className:`text-sm text-white whitespace-pre-wrap`,children:e.message})]}),!e.success&&e.error_message&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-red-700 dark:text-red-400 mb-1`,children:a(`notifications.logError`)}),(0,G.jsx)(`p`,{className:`text-sm text-red-700 dark:text-red-300`,children:e.error_message})]}),(0,G.jsxs)(`div`,{className:`flex gap-4 text-xs text-bambu-gray pt-1`,children:[(0,G.jsx)(`span`,{children:a(`notifications.logProvider`,{type:e.provider_type})}),(0,G.jsx)(`span`,{children:a(`notifications.logTime`,{time:i(e.created_at)})})]})]})]})}var pWe=Object.defineProperty,Y8=Object.getOwnPropertySymbols,mWe=Object.prototype.hasOwnProperty,hWe=Object.prototype.propertyIsEnumerable,gWe=(e,t,n)=>t in e?pWe(e,t,{enumerable:!0,configurable:!0,writable:!0,value:n}):e[t]=n,X8=(e,t)=>{for(var n in t||={})mWe.call(t,n)&&gWe(e,n,t[n]);if(Y8)for(var n of Y8(t))hWe.call(t,n)&&gWe(e,n,t[n]);return e},Z8=(e,t)=>{var n={};for(var r in e)mWe.call(e,r)&&t.indexOf(r)<0&&(n[r]=e[r]);if(e!=null&&Y8)for(var r of Y8(e))t.indexOf(r)<0&&hWe.call(e,r)&&(n[r]=e[r]);return n},Q8;(e=>{let t=class t{constructor(e,n,r,a){if(this.version=e,this.errorCorrectionLevel=n,this.modules=[],this.isFunction=[],e<t.MIN_VERSION||e>t.MAX_VERSION)throw RangeError(`Version value out of range`);if(a<-1||a>7)throw RangeError(`Mask value out of range`);this.size=e*4+17;let o=[];for(let e=0;e<this.size;e++)o.push(!1);for(let e=0;e<this.size;e++)this.modules.push(o.slice()),this.isFunction.push(o.slice());this.drawFunctionPatterns();let s=this.addEccAndInterleave(r);if(this.drawCodewords(s),a==-1){let e=1e9;for(let t=0;t<8;t++){this.applyMask(t),this.drawFormatBits(t);let n=this.getPenaltyScore();n<e&&(a=t,e=n),this.applyMask(t)}}i(0<=a&&a<=7),this.mask=a,this.applyMask(a),this.drawFormatBits(a),this.isFunction=[]}static encodeText(n,r){let i=e.QrSegment.makeSegments(n);return t.encodeSegments(i,r)}static encodeBinary(n,r){let i=e.QrSegment.makeBytes(n);return t.encodeSegments([i],r)}static encodeSegments(e,r,a=1,s=40,c=-1,l=!0){if(!(t.MIN_VERSION<=a&&a<=s&&s<=t.MAX_VERSION)||c<-1||c>7)throw RangeError(`Invalid value`);let u,d;for(u=a;;u++){let n=t.getNumDataCodewords(u,r)*8,i=o.getTotalBits(e,u);if(i<=n){d=i;break}if(u>=s)throw RangeError(`Data too long`)}for(let e of[t.Ecc.MEDIUM,t.Ecc.QUARTILE,t.Ecc.HIGH])l&&d<=t.getNumDataCodewords(u,e)*8&&(r=e);let f=[];for(let t of e){n(t.mode.modeBits,4,f),n(t.numChars,t.mode.numCharCountBits(u),f);for(let e of t.getData())f.push(e)}i(f.length==d);let p=t.getNumDataCodewords(u,r)*8;i(f.length<=p),n(0,Math.min(4,p-f.length),f),n(0,(8-f.length%8)%8,f),i(f.length%8==0);for(let e=236;f.length<p;e^=253)n(e,8,f);let m=[];for(;m.length*8<f.length;)m.push(0);return f.forEach((e,t)=>m[t>>>3]|=e<<7-(t&7)),new t(u,r,m,c)}getModule(e,t){return 0<=e&&e<this.size&&0<=t&&t<this.size&&this.modules[t][e]}getModules(){return this.modules}drawFunctionPatterns(){for(let e=0;e<this.size;e++)this.setFunctionModule(6,e,e%2==0),this.setFunctionModule(e,6,e%2==0);this.drawFinderPattern(3,3),this.drawFinderPattern(this.size-4,3),this.drawFinderPattern(3,this.size-4);let e=this.getAlignmentPatternPositions(),t=e.length;for(let n=0;n<t;n++)for(let r=0;r<t;r++)n==0&&r==0||n==0&&r==t-1||n==t-1&&r==0||this.drawAlignmentPattern(e[n],e[r]);this.drawFormatBits(0),this.drawVersion()}drawFormatBits(e){let t=this.errorCorrectionLevel.formatBits<<3|e,n=t;for(let e=0;e<10;e++)n=n<<1^(n>>>9)*1335;let a=(t<<10|n)^21522;i(a>>>15==0);for(let e=0;e<=5;e++)this.setFunctionModule(8,e,r(a,e));this.setFunctionModule(8,7,r(a,6)),this.setFunctionModule(8,8,r(a,7)),this.setFunctionModule(7,8,r(a,8));for(let e=9;e<15;e++)this.setFunctionModule(14-e,8,r(a,e));for(let e=0;e<8;e++)this.setFunctionModule(this.size-1-e,8,r(a,e));for(let e=8;e<15;e++)this.setFunctionModule(8,this.size-15+e,r(a,e));this.setFunctionModule(8,this.size-8,!0)}drawVersion(){if(this.version<7)return;let e=this.version;for(let t=0;t<12;t++)e=e<<1^(e>>>11)*7973;let t=this.version<<12|e;i(t>>>18==0);for(let e=0;e<18;e++){let n=r(t,e),i=this.size-11+e%3,a=Math.floor(e/3);this.setFunctionModule(i,a,n),this.setFunctionModule(a,i,n)}}drawFinderPattern(e,t){for(let n=-4;n<=4;n++)for(let r=-4;r<=4;r++){let i=Math.max(Math.abs(r),Math.abs(n)),a=e+r,o=t+n;0<=a&&a<this.size&&0<=o&&o<this.size&&this.setFunctionModule(a,o,i!=2&&i!=4)}}drawAlignmentPattern(e,t){for(let n=-2;n<=2;n++)for(let r=-2;r<=2;r++)this.setFunctionModule(e+r,t+n,Math.max(Math.abs(r),Math.abs(n))!=1)}setFunctionModule(e,t,n){this.modules[t][e]=n,this.isFunction[t][e]=!0}addEccAndInterleave(e){let n=this.version,r=this.errorCorrectionLevel;if(e.length!=t.getNumDataCodewords(n,r))throw RangeError(`Invalid argument`);let a=t.NUM_ERROR_CORRECTION_BLOCKS[r.ordinal][n],o=t.ECC_CODEWORDS_PER_BLOCK[r.ordinal][n],s=Math.floor(t.getNumRawDataModules(n)/8),c=a-s%a,l=Math.floor(s/a),u=[],d=t.reedSolomonComputeDivisor(o);for(let n=0,r=0;n<a;n++){let i=e.slice(r,r+l-o+(n<c?0:1));r+=i.length;let a=t.reedSolomonComputeRemainder(i,d);n<c&&i.push(0),u.push(i.concat(a))}let f=[];for(let e=0;e<u[0].length;e++)u.forEach((t,n)=>{(e!=l-o||n>=c)&&f.push(t[e])});return i(f.length==s),f}drawCodewords(e){if(e.length!=Math.floor(t.getNumRawDataModules(this.version)/8))throw RangeError(`Invalid argument`);let n=0;for(let t=this.size-1;t>=1;t-=2){t==6&&(t=5);for(let i=0;i<this.size;i++)for(let a=0;a<2;a++){let o=t-a,s=t+1&2?i:this.size-1-i;!this.isFunction[s][o]&&n<e.length*8&&(this.modules[s][o]=r(e[n>>>3],7-(n&7)),n++)}}i(n==e.length*8)}applyMask(e){if(e<0||e>7)throw RangeError(`Mask value out of range`);for(let t=0;t<this.size;t++)for(let n=0;n<this.size;n++){let r;switch(e){case 0:r=(n+t)%2==0;break;case 1:r=t%2==0;break;case 2:r=n%3==0;break;case 3:r=(n+t)%3==0;break;case 4:r=(Math.floor(n/3)+Math.floor(t/2))%2==0;break;case 5:r=n*t%2+n*t%3==0;break;case 6:r=(n*t%2+n*t%3)%2==0;break;case 7:r=((n+t)%2+n*t%3)%2==0;break;default:throw Error(`Unreachable`)}!this.isFunction[t][n]&&r&&(this.modules[t][n]=!this.modules[t][n])}}getPenaltyScore(){let e=0;for(let n=0;n<this.size;n++){let r=!1,i=0,a=[0,0,0,0,0,0,0];for(let o=0;o<this.size;o++)this.modules[n][o]==r?(i++,i==5?e+=t.PENALTY_N1:i>5&&e++):(this.finderPenaltyAddHistory(i,a),r||(e+=this.finderPenaltyCountPatterns(a)*t.PENALTY_N3),r=this.modules[n][o],i=1);e+=this.finderPenaltyTerminateAndCount(r,i,a)*t.PENALTY_N3}for(let n=0;n<this.size;n++){let r=!1,i=0,a=[0,0,0,0,0,0,0];for(let o=0;o<this.size;o++)this.modules[o][n]==r?(i++,i==5?e+=t.PENALTY_N1:i>5&&e++):(this.finderPenaltyAddHistory(i,a),r||(e+=this.finderPenaltyCountPatterns(a)*t.PENALTY_N3),r=this.modules[o][n],i=1);e+=this.finderPenaltyTerminateAndCount(r,i,a)*t.PENALTY_N3}for(let n=0;n<this.size-1;n++)for(let r=0;r<this.size-1;r++){let i=this.modules[n][r];i==this.modules[n][r+1]&&i==this.modules[n+1][r]&&i==this.modules[n+1][r+1]&&(e+=t.PENALTY_N2)}let n=0;for(let e of this.modules)n=e.reduce((e,t)=>e+ +!!t,n);let r=this.size*this.size,a=Math.ceil(Math.abs(n*20-r*10)/r)-1;return i(0<=a&&a<=9),e+=a*t.PENALTY_N4,i(0<=e&&e<=2568888),e}getAlignmentPatternPositions(){if(this.version==1)return[];{let e=Math.floor(this.version/7)+2,t=this.version==32?26:Math.ceil((this.version*4+4)/(e*2-2))*2,n=[6];for(let r=this.size-7;n.length<e;r-=t)n.splice(1,0,r);return n}}static getNumRawDataModules(e){if(e<t.MIN_VERSION||e>t.MAX_VERSION)throw RangeError(`Version number out of range`);let n=(16*e+128)*e+64;if(e>=2){let t=Math.floor(e/7)+2;n-=(25*t-10)*t-55,e>=7&&(n-=36)}return i(208<=n&&n<=29648),n}static getNumDataCodewords(e,n){return Math.floor(t.getNumRawDataModules(e)/8)-t.ECC_CODEWORDS_PER_BLOCK[n.ordinal][e]*t.NUM_ERROR_CORRECTION_BLOCKS[n.ordinal][e]}static reedSolomonComputeDivisor(e){if(e<1||e>255)throw RangeError(`Degree out of range`);let n=[];for(let t=0;t<e-1;t++)n.push(0);n.push(1);let r=1;for(let i=0;i<e;i++){for(let e=0;e<n.length;e++)n[e]=t.reedSolomonMultiply(n[e],r),e+1<n.length&&(n[e]^=n[e+1]);r=t.reedSolomonMultiply(r,2)}return n}static reedSolomonComputeRemainder(e,n){let r=n.map(e=>0);for(let i of e){let e=i^r.shift();r.push(0),n.forEach((n,i)=>r[i]^=t.reedSolomonMultiply(n,e))}return r}static reedSolomonMultiply(e,t){if(e>>>8||t>>>8)throw RangeError(`Byte out of range`);let n=0;for(let r=7;r>=0;r--)n=n<<1^(n>>>7)*285,n^=(t>>>r&1)*e;return i(n>>>8==0),n}finderPenaltyCountPatterns(e){let t=e[1];i(t<=this.size*3);let n=t>0&&e[2]==t&&e[3]==t*3&&e[4]==t&&e[5]==t;return(n&&e[0]>=t*4&&e[6]>=t?1:0)+(n&&e[6]>=t*4&&e[0]>=t?1:0)}finderPenaltyTerminateAndCount(e,t,n){return e&&(this.finderPenaltyAddHistory(t,n),t=0),t+=this.size,this.finderPenaltyAddHistory(t,n),this.finderPenaltyCountPatterns(n)}finderPenaltyAddHistory(e,t){t[0]==0&&(e+=this.size),t.pop(),t.unshift(e)}};t.MIN_VERSION=1,t.MAX_VERSION=40,t.PENALTY_N1=3,t.PENALTY_N2=3,t.PENALTY_N3=40,t.PENALTY_N4=10,t.ECC_CODEWORDS_PER_BLOCK=[[-1,7,10,15,20,26,18,20,24,30,18,20,24,26,30,22,24,28,30,28,28,28,28,30,30,26,28,30,30,30,30,30,30,30,30,30,30,30,30,30,30],[-1,10,16,26,18,24,16,18,22,22,26,30,22,22,24,24,28,28,26,26,26,26,28,28,28,28,28,28,28,28,28,28,28,28,28,28,28,28,28,28,28],[-1,13,22,18,26,18,24,18,22,20,24,28,26,24,20,30,24,28,28,26,30,28,30,30,30,30,28,30,30,30,30,30,30,30,30,30,30,30,30,30,30],[-1,17,28,22,16,22,28,26,26,24,28,24,28,22,24,24,30,28,28,26,28,30,24,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30,30]],t.NUM_ERROR_CORRECTION_BLOCKS=[[-1,1,1,1,1,1,2,2,2,2,4,4,4,4,4,6,6,6,6,7,8,8,9,9,10,12,12,12,13,14,15,16,17,18,19,19,20,21,22,24,25],[-1,1,1,1,2,2,4,4,4,5,5,5,8,9,9,10,10,11,13,14,16,17,17,18,20,21,23,25,26,28,29,31,33,35,37,38,40,43,45,47,49],[-1,1,1,2,2,4,4,6,6,8,8,8,10,12,16,12,17,16,18,21,20,23,23,25,27,29,34,34,35,38,40,43,45,48,51,53,56,59,62,65,68],[-1,1,1,2,4,4,4,5,6,8,8,11,11,16,16,18,16,19,21,25,25,25,34,30,32,35,37,40,42,45,48,51,54,57,60,63,66,70,74,77,81]],e.QrCode=t;function n(e,t,n){if(t<0||t>31||e>>>t)throw RangeError(`Value out of range`);for(let r=t-1;r>=0;r--)n.push(e>>>r&1)}function r(e,t){return(e>>>t&1)!=0}function i(e){if(!e)throw Error(`Assertion error`)}let a=class e{constructor(e,t,n){if(this.mode=e,this.numChars=t,this.bitData=n,t<0)throw RangeError(`Invalid argument`);this.bitData=n.slice()}static makeBytes(t){let r=[];for(let e of t)n(e,8,r);return new e(e.Mode.BYTE,t.length,r)}static makeNumeric(t){if(!e.isNumeric(t))throw RangeError(`String contains non-numeric characters`);let r=[];for(let e=0;e<t.length;){let i=Math.min(t.length-e,3);n(parseInt(t.substring(e,e+i),10),i*3+1,r),e+=i}return new e(e.Mode.NUMERIC,t.length,r)}static makeAlphanumeric(t){if(!e.isAlphanumeric(t))throw RangeError(`String contains unencodable characters in alphanumeric mode`);let r=[],i;for(i=0;i+2<=t.length;i+=2){let a=e.ALPHANUMERIC_CHARSET.indexOf(t.charAt(i))*45;a+=e.ALPHANUMERIC_CHARSET.indexOf(t.charAt(i+1)),n(a,11,r)}return i<t.length&&n(e.ALPHANUMERIC_CHARSET.indexOf(t.charAt(i)),6,r),new e(e.Mode.ALPHANUMERIC,t.length,r)}static makeSegments(t){return t==``?[]:e.isNumeric(t)?[e.makeNumeric(t)]:e.isAlphanumeric(t)?[e.makeAlphanumeric(t)]:[e.makeBytes(e.toUtf8ByteArray(t))]}static makeEci(t){let r=[];if(t<0)throw RangeError(`ECI assignment value out of range`);if(t<128)n(t,8,r);else if(t<16384)n(2,2,r),n(t,14,r);else if(t<1e6)n(6,3,r),n(t,21,r);else throw RangeError(`ECI assignment value out of range`);return new e(e.Mode.ECI,0,r)}static isNumeric(t){return e.NUMERIC_REGEX.test(t)}static isAlphanumeric(t){return e.ALPHANUMERIC_REGEX.test(t)}getData(){return this.bitData.slice()}static getTotalBits(e,t){let n=0;for(let r of e){let e=r.mode.numCharCountBits(t);if(r.numChars>=1<<e)return 1/0;n+=4+e+r.bitData.length}return n}static toUtf8ByteArray(e){e=encodeURI(e);let t=[];for(let n=0;n<e.length;n++)e.charAt(n)==`%`?(t.push(parseInt(e.substring(n+1,n+3),16)),n+=2):t.push(e.charCodeAt(n));return t}};a.NUMERIC_REGEX=/^[0-9]*$/,a.ALPHANUMERIC_REGEX=/^[A-Z0-9 $%*+.\/:-]*$/,a.ALPHANUMERIC_CHARSET=`0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ $%*+-./:`;let o=a;e.QrSegment=a})(Q8||={}),(e=>{(e=>{let t=class{constructor(e,t){this.ordinal=e,this.formatBits=t}};t.LOW=new t(0,1),t.MEDIUM=new t(1,0),t.QUARTILE=new t(2,3),t.HIGH=new t(3,2),e.Ecc=t})(e.QrCode||={})})(Q8||={}),(e=>{(e=>{let t=class{constructor(e,t){this.modeBits=e,this.numBitsCharCount=t}numCharCountBits(e){return this.numBitsCharCount[Math.floor((e+7)/17)]}};t.NUMERIC=new t(1,[10,12,14]),t.ALPHANUMERIC=new t(2,[9,11,13]),t.BYTE=new t(4,[8,16,16]),t.KANJI=new t(8,[8,10,12]),t.ECI=new t(7,[0,0,0]),e.Mode=t})(e.QrSegment||={})})(Q8||={});var $8=Q8,_We={L:$8.QrCode.Ecc.LOW,M:$8.QrCode.Ecc.MEDIUM,Q:$8.QrCode.Ecc.QUARTILE,H:$8.QrCode.Ecc.HIGH},vWe=128,yWe=`L`,bWe=`#FFFFFF`,xWe=`#000000`,SWe=!1,CWe=1,wWe=4,TWe=0,EWe=.1;function DWe(e,t=0){let n=[];return e.forEach(function(e,r){let i=null;e.forEach(function(a,o){if(!a&&i!==null){n.push(`M${i+t} ${r+t}h${o-i}v1H${i+t}z`),i=null;return}if(o===e.length-1){if(!a)return;i===null?n.push(`M${o+t},${r+t} h1v1H${o+t}z`):n.push(`M${i+t},${r+t} h${o+1-i}v1H${i+t}z`);return}a&&i===null&&(i=o)})}),n.join(``)}function OWe(e,t){return e.slice().map((e,n)=>n<t.y||n>=t.y+t.h?e:e.map((e,n)=>n<t.x||n>=t.x+t.w?e:!1))}function kWe(e,t,n,r){if(r==null)return null;let i=e.length+n*2,a=Math.floor(t*EWe),o=i/t,s=(r.width||a)*o,c=(r.height||a)*o,l=r.x==null?e.length/2-s/2:r.x*o,u=r.y==null?e.length/2-c/2:r.y*o,d=r.opacity==null?1:r.opacity,f=null;if(r.excavate){let e=Math.floor(l),t=Math.floor(u);f={x:e,y:t,w:Math.ceil(s+l-e),h:Math.ceil(c+u-t)}}let p=r.crossOrigin;return{x:l,y:u,h:c,w:s,excavation:f,opacity:d,crossOrigin:p}}function AWe(e,t){return t==null?e?wWe:TWe:Math.max(Math.floor(t),0)}function jWe({value:e,level:t,minVersion:n,includeMargin:r,marginSize:i,imageSettings:a,size:o,boostLevel:s}){let c=y.useMemo(()=>{let r=(Array.isArray(e)?e:[e]).reduce((e,t)=>(e.push(...$8.QrSegment.makeSegments(t)),e),[]);return $8.QrCode.encodeSegments(r,_We[t],n,void 0,void 0,s)},[e,t,n,s]),{cells:l,margin:u,numCells:d,calculatedImageSettings:f}=y.useMemo(()=>{let e=c.getModules(),t=AWe(r,i);return{cells:e,margin:t,numCells:e.length+t*2,calculatedImageSettings:kWe(e,o,t,a)}},[c,o,a,r,i]);return{qrcode:c,margin:u,cells:l,numCells:d,calculatedImageSettings:f}}var MWe=function(){try{new Path2D().addPath(new Path2D)}catch{return!1}return!0}(),NWe=y.forwardRef(function(e,t){let n=e,{value:r,size:i=vWe,level:a=yWe,bgColor:o=bWe,fgColor:s=xWe,includeMargin:c=SWe,minVersion:l=CWe,boostLevel:u,marginSize:d,imageSettings:f}=n,p=Z8(n,[`value`,`size`,`level`,`bgColor`,`fgColor`,`includeMargin`,`minVersion`,`boostLevel`,`marginSize`,`imageSettings`]),{style:m}=p,h=Z8(p,[`style`]),g=f?.src,_=y.useRef(null),v=y.useRef(null),b=y.useCallback(e=>{_.current=e,typeof t==`function`?t(e):t&&(t.current=e)},[t]),[x,S]=y.useState(!1),{margin:C,cells:w,numCells:T,calculatedImageSettings:E}=jWe({value:r,level:a,minVersion:l,boostLevel:u,includeMargin:c,marginSize:d,imageSettings:f,size:i});y.useEffect(()=>{if(_.current!=null){let e=_.current,t=e.getContext(`2d`);if(!t)return;let n=w,r=v.current,a=E!=null&&r!==null&&r.complete&&r.naturalHeight!==0&&r.naturalWidth!==0;a&&E.excavation!=null&&(n=OWe(w,E.excavation));let c=window.devicePixelRatio||1;e.height=e.width=i*c;let l=i/T*c;t.scale(l,l),t.fillStyle=o,t.fillRect(0,0,T,T),t.fillStyle=s,MWe?t.fill(new Path2D(DWe(n,C))):w.forEach(function(e,n){e.forEach(function(e,r){e&&t.fillRect(r+C,n+C,1,1)})}),E&&(t.globalAlpha=E.opacity),a&&t.drawImage(r,E.x+C,E.y+C,E.w,E.h)}}),y.useEffect(()=>{S(!1)},[g]);let D=X8({height:i,width:i},m),O=null;return g!=null&&(O=y.createElement(`img`,{src:g,key:g,style:{display:`none`},onLoad:()=>{S(!0)},ref:v,crossOrigin:E?.crossOrigin})),y.createElement(y.Fragment,null,y.createElement(`canvas`,X8({style:D,height:i,width:i,ref:b,role:`img`},h)),O)});NWe.displayName=`QRCodeCanvas`;var PWe=y.forwardRef(function(e,t){let n=e,{value:r,size:i=vWe,level:a=yWe,bgColor:o=bWe,fgColor:s=xWe,includeMargin:c=SWe,minVersion:l=CWe,boostLevel:u,title:d,marginSize:f,imageSettings:p}=n,m=Z8(n,[`value`,`size`,`level`,`bgColor`,`fgColor`,`includeMargin`,`minVersion`,`boostLevel`,`title`,`marginSize`,`imageSettings`]),{margin:h,cells:g,numCells:_,calculatedImageSettings:v}=jWe({value:r,level:a,minVersion:l,boostLevel:u,includeMargin:c,marginSize:f,imageSettings:p,size:i}),b=g,x=null;p!=null&&v!=null&&(v.excavation!=null&&(b=OWe(g,v.excavation)),x=y.createElement(`image`,{href:p.src,height:v.h,width:v.w,x:v.x+h,y:v.y+h,preserveAspectRatio:`none`,opacity:v.opacity,crossOrigin:v.crossOrigin}));let S=DWe(b,h);return y.createElement(`svg`,X8({height:i,width:i,viewBox:`0 0 ${_} ${_}`,ref:t,role:`img`},m),!!d&&y.createElement(`title`,null,d),y.createElement(`path`,{fill:o,d:`M0,0 h${_}v${_}H0z`,shapeRendering:`crispEdges`}),y.createElement(`path`,{fill:s,d:S,shapeRendering:`crispEdges`}),x)});PWe.displayName=`QRCodeSVG`;function FWe(e,t){return`bambuddy://config?v=1&url=${encodeURIComponent(e)}&key=${encodeURIComponent(t)}`}function IWe({apiKey:e,baseUrl:t,onClose:n}){let{t:r}=U(),i=FWe(t??window.location.origin,e);return(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&n()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[n]),(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:n,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-sm`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:r(`settings.apiKeyQrTitle`)}),(0,G.jsx)(`button`,{onClick:n,className:`text-bambu-gray hover:text-white transition-colors`,"aria-label":r(`common.close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-6 flex flex-col items-center`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4 text-center`,children:r(`settings.apiKeyQrCaption`)}),(0,G.jsx)(`div`,{className:`bg-white p-4 rounded-lg mb-4`,children:(0,G.jsx)(PWe,{value:i,size:256})}),(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-xs text-amber-700 dark:text-amber-400 mb-4`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 flex-shrink-0 mt-0.5`}),(0,G.jsx)(`span`,{children:r(`settings.apiKeyQrWarning`)})]}),(0,G.jsx)(Q,{onClick:n,className:`w-full`,children:r(`common.close`)})]})]})})}var LWe=300,e5=2;function RWe({onSuccess:e}){let{t}=U(),n=co(),[r,i]=(0,y.useState)(``),[a,o]=(0,y.useState)(``),[s,c]=(0,y.useState)(null),[l,u]=(0,y.useState)(null);(0,y.useEffect)(()=>{let e=r.trim();if(e.length<e5){o(``);return}let t=setTimeout(()=>o(e),LWe);return()=>clearTimeout(t)},[r]),(0,y.useEffect)(()=>{c(null),u(null)},[a]);let d=K({queryKey:[`ldap-search`,a],queryFn:()=>Z.searchLDAPDirectory(a),enabled:a.length>=e5,staleTime:3e4}),f=q({mutationFn:e=>Z.provisionLDAPUser(e),onSuccess:t=>{n.invalidateQueries({queryKey:[`users`]}),e(t)},onError:e=>{u(e.message||t(`users.modal.ldapErrorProvision`))}}),p=(0,y.useMemo)(()=>d.data?.find(e=>e.dn===s)??null,[d.data,s]),m=r.trim().length>0&&r.trim().length<e5,h=d.isFetching&&a.length>=e5,g=!!d.data&&d.data.length>0,_=!h&&!!d.data&&d.data.length===0&&a.length>=e5;return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:t(`users.modal.ldapSearchLabel`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`w-4 h-4 text-bambu-gray absolute left-3 top-1/2 -translate-y-1/2`}),(0,G.jsx)(`input`,{type:`text`,value:r,onChange:e=>i(e.target.value),className:`w-full pl-9 pr-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:t(`users.modal.ldapSearchPlaceholder`),autoComplete:`off`})]}),m&&(0,G.jsx)(`p`,{className:`mt-1 text-xs text-bambu-gray`,children:t(`users.modal.ldapMinChars`)})]}),(0,G.jsxs)(`div`,{className:`min-h-[8rem] max-h-64 overflow-y-auto bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg`,children:[h&&(0,G.jsxs)(`div`,{className:`flex items-center justify-center py-8 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin mr-2`}),(0,G.jsx)(`span`,{children:t(`users.modal.ldapSearching`)})]}),_&&(0,G.jsx)(`div`,{className:`flex items-center justify-center py-8 text-bambu-gray text-sm`,children:t(`users.modal.ldapNoResults`)}),d.isError&&(0,G.jsx)(`div`,{className:`px-3 py-4 text-sm text-red-700 dark:text-red-400`,children:d.error instanceof Error?d.error.message:t(`users.modal.ldapSearchError`)}),!h&&g&&(0,G.jsx)(`ul`,{className:`divide-y divide-bambu-dark-tertiary`,children:d.data.map(e=>(0,G.jsx)(zWe,{result:e,selected:s===e.dn,onSelect:()=>c(e.dn)},e.dn))}),!h&&!d.data&&!d.isError&&(0,G.jsx)(`div`,{className:`flex items-center justify-center py-8 text-bambu-gray text-sm`,children:t(`users.modal.ldapTypeToSearch`)})]}),p&&(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary/50 border border-bambu-green/20 rounded-lg p-3 space-y-1`,children:[(0,G.jsxs)(`p`,{className:`text-sm text-white`,children:[(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[t(`users.modal.ldapSelectedLabel`),`: `]}),(0,G.jsx)(`span`,{className:`font-medium`,children:p.username}),p.display_name&&(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[` — `,p.display_name]})]}),p.email&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:p.email}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray break-all`,children:p.dn})]}),l&&(0,G.jsx)(`div`,{className:`bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 rounded-lg p-3`,children:(0,G.jsx)(`p`,{className:`text-sm text-red-700 dark:text-red-400`,children:l})}),(0,G.jsx)(`div`,{className:`flex justify-end`,children:(0,G.jsx)(Q,{onClick:()=>{!p||p.already_provisioned||(u(null),f.mutate(p.username))},disabled:!p||p.already_provisioned||f.isPending,children:f.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),t(`users.modal.ldapProvisioning`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),t(`users.modal.ldapProvision`)]})})})]})}function zWe({result:e,selected:t,onSelect:n}){let{t:r}=U(),i=e.already_provisioned;return(0,G.jsx)(`li`,{children:(0,G.jsxs)(`button`,{type:`button`,onClick:n,disabled:i,className:`w-full text-left px-3 py-2 flex items-center gap-3 transition-colors ${i?`opacity-50 cursor-not-allowed`:t?`bg-bambu-green/10`:`hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`p`,{className:`text-sm text-white truncate`,children:[(0,G.jsx)(`span`,{className:`font-medium`,children:e.username}),e.display_name&&(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[` — `,e.display_name]})]}),e.email&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray truncate`,children:e.email})]}),i&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-xs text-bambu-gray whitespace-nowrap`,children:[(0,G.jsx)(Ss,{className:`w-3.5 h-3.5`}),r(`users.modal.ldapAlreadyProvisioned`)]})]})})}function BWe({formData:e,setFormData:t,groups:n,onClose:r,onCreate:i,isCreating:a,isCreateButtonDisabled:o,ldapEnabled:s=!1,onLdapProvisioned:c}){let{t:l}=U(),[u,d]=(0,y.useState)(`local`);(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&r()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[r]);let f=n=>{t({...e,group_ids:e.group_ids.includes(n)?e.group_ids.filter(e=>e!==n):[...e.group_ids,n]})};return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:r,children:(0,G.jsxs)(Ld,{className:`w-full max-w-md`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex flex-col gap-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Hu,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:l(`users.modal.createUser`)})]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray ml-7`,children:l(`users.modal.advancedAuthSubtitle`)||`with Advanced Authentication`})]}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:r,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]})}),(0,G.jsxs)(zd,{children:[s&&(0,G.jsxs)(`div`,{className:`mb-4 flex items-center gap-1 p-1 bg-bambu-dark-secondary rounded-lg`,role:`tablist`,"aria-label":l(`users.modal.tabsAriaLabel`),children:[(0,G.jsx)(`button`,{type:`button`,role:`tab`,"aria-selected":u===`local`,onClick:()=>d(`local`),className:`flex-1 px-3 py-2 text-sm rounded-md transition-colors ${u===`local`?`bg-bambu-green/15 text-bambu-green`:`text-bambu-gray hover:text-white`}`,children:l(`users.modal.localTab`)}),(0,G.jsx)(`button`,{type:`button`,role:`tab`,"aria-selected":u===`ldap`,onClick:()=>d(`ldap`),className:`flex-1 px-3 py-2 text-sm rounded-md transition-colors ${u===`ldap`?`bg-bambu-green/15 text-bambu-green`:`text-bambu-gray hover:text-white`}`,children:l(`users.modal.ldapTab`)})]}),u===`ldap`&&s?(0,G.jsx)(RWe,{onSuccess:e=>{c?.(e)}}):(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:[l(`users.form.username`),` `,(0,G.jsx)(`span`,{className:`text-red-600 dark:text-red-400`,children:`*`})]}),(0,G.jsx)(`input`,{type:`text`,value:e.username,onChange:n=>t({...e,username:n.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:l(`users.form.usernamePlaceholder`),autoComplete:`username`,required:!0})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:[l(`users.form.email`)||`Email`,` `,(0,G.jsx)(`span`,{className:`text-red-600 dark:text-red-400`,children:`*`})]}),(0,G.jsx)(`input`,{type:`email`,value:e.email,onChange:n=>t({...e,email:n.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:l(`users.form.emailPlaceholder`)||`user@example.com`,required:!0})]}),(0,G.jsx)(`div`,{className:`bg-bambu-dark-secondary/50 border border-bambu-green/20 rounded-lg p-3`,children:(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:l(`users.form.autoGeneratedPassword`)||`A secure password will be automatically generated and emailed to the user.`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:l(`users.form.groups`)}),(0,G.jsxs)(`div`,{className:`space-y-2 max-h-40 overflow-y-auto p-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg`,children:[n.map(t=>(0,G.jsxs)(`label`,{className:`flex items-center gap-3 px-2 py-1.5 rounded hover:bg-bambu-dark-tertiary cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:e.group_ids.includes(t.id),onChange:()=>f(t.id),className:`w-4 h-4 rounded border-bambu-gray text-bambu-green focus:ring-bambu-green focus:ring-offset-0 bg-bambu-dark`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:t.name}),t.is_system&&(0,G.jsxs)(`span`,{className:`text-xs text-yellow-700 dark:text-yellow-400`,children:[`(`,l(`users.system`),`)`]})]},t.id)),n.length===0&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:l(`users.noGroupsAvailable`)})]})]})]}),(0,G.jsxs)(`div`,{className:`mt-6 flex justify-end gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:r,children:l(`users.modal.cancel`)}),u===`local`&&(0,G.jsx)(Q,{onClick:i,disabled:o,children:a?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),l(`users.modal.creating`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),l(`users.modal.createUser`)]})})]})]})]})})}function VWe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),[r,i]=(0,y.useState)(!1),[a,o]=(0,y.useState)(``),[s,c]=(0,y.useState)(`auto`),[l,u]=(0,y.useState)(!1),[d,f]=(0,y.useState)(!0),[p,m]=(0,y.useState)(!0),[h,g]=(0,y.useState)(`all`),[_,v]=(0,y.useState)(!1),[b,x]=(0,y.useState)(!1),[S,C]=(0,y.useState)(!1),[w,T]=(0,y.useState)(!1),{data:E,isLoading:D}=K({queryKey:[`spoolman-settings`],queryFn:Z.getSpoolmanSettings}),{data:O,isLoading:k,refetch:A}=K({queryKey:[`spoolman-status`],queryFn:Z.getSpoolmanStatus,refetchInterval:3e4}),{data:j}=K({queryKey:[`printers`],queryFn:Z.getPrinters});(0,y.useEffect)(()=>{E&&(i(E.spoolman_enabled===`true`),o(E.spoolman_url||``),c(E.spoolman_sync_mode||`auto`),u(E.spoolman_disable_weight_sync===`true`),f(E.spoolman_report_partial_usage!==`false`),m(E.auto_add_unknown_rfid!==`false`),v(!0))},[E]),(0,y.useEffect)(()=>{if(!(!_||!E)&&(E.spoolman_enabled===`true`!==r||(E.spoolman_url||``)!==a||(E.spoolman_sync_mode||`auto`)!==s||E.spoolman_disable_weight_sync===`true`!==l||E.spoolman_report_partial_usage!==`false`!==d||E.auto_add_unknown_rfid!==`false`!==p)){let e=setTimeout(()=>{M.mutate()},500);return()=>clearTimeout(e)}},[r,a,s,l,d,p,_]);let M=q({mutationFn:()=>Z.updateSpoolmanSettings({spoolman_enabled:r?`true`:`false`,spoolman_url:a,spoolman_sync_mode:s,spoolman_disable_weight_sync:l?`true`:`false`,spoolman_report_partial_usage:d?`true`:`false`,auto_add_unknown_rfid:p?`true`:`false`}),onSuccess:()=>{t.invalidateQueries({queryKey:[`spoolman-settings`]}),t.invalidateQueries({queryKey:[`spoolman-status`]}),t.invalidateQueries({queryKey:[`spool-assignments`]}),t.invalidateQueries({queryKey:[`settings`]}),t.invalidateQueries({queryKey:[`spoolman-inventory-filaments`]}),n(e(`settings.toast.settingsSaved`))},onError:()=>{n(e(`settings.toast.saveFailed`),`error`)}}),N=q({mutationFn:Z.connectSpoolman,onSuccess:()=>{A()},onError:()=>{n(e(`settings.toast.saveFailed`),`error`)}}),P=q({mutationFn:Z.syncAllPrintersAms,onSuccess:t=>{n(e(`settings.spoolmanAmsSyncSuccess`,{synced:t.synced_count,skipped:0}),`success`)},onError:()=>{n(e(`settings.toast.saveFailed`),`error`)}}),F=q({mutationFn:e=>Z.syncPrinterAms(e),onSuccess:t=>{n(e(`settings.spoolmanAmsSyncSuccess`,{synced:t.synced_count,skipped:0}),`success`)},onError:()=>{n(e(`settings.toast.saveFailed`),`error`)}}),I=()=>{h===`all`?P.mutate():F.mutate(h)},L=q({mutationFn:Z.syncWeightsFromAms,onSuccess:r=>{t.invalidateQueries({queryKey:[`spools`]}),t.invalidateQueries({queryKey:[`inventory-spools`]}),n(e(`settings.amsSyncSuccess`,{synced:r.synced,skipped:r.skipped}),`success`),C(!1)},onError:()=>{n(e(`settings.amsSyncError`),`error`),C(!1)}}),R=q({mutationFn:Z.syncSpoolmanAmsWeights,onSuccess:r=>{t.invalidateQueries({queryKey:[`spoolman-inventory-spools`]}),n(e(`settings.spoolmanAmsSyncSuccess`,{synced:r.synced,skipped:r.skipped}),`success`),T(!1)},onError:t=>{t instanceof od&&t.status===503?n(e(`settings.spoolmanAmsSyncErrorUnreachable`),`error`):t instanceof od&&t.status===400?n(e(`settings.spoolmanAmsSyncErrorNotConfigured`),`error`):n(e(`settings.spoolmanAmsSyncError`),`error`),T(!1)}}),z=P.isPending||F.isPending,B=h===`all`?P.data:F.data,V=h===`all`?P.isSuccess:F.isSuccess;return D?(0,G.jsxs)(Ld,{id:`card-spoolman`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Ws,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`settings.filamentTracking`)})]})}),(0,G.jsx)(zd,{children:(0,G.jsx)(`div`,{className:`flex justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})})})]}):(0,G.jsxs)(Ld,{id:`card-spoolman`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Ws,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`settings.filamentTracking`)})]}),M.isPending&&(0,G.jsx)(Y,{className:`w-4 h-4 text-bambu-green animate-spin`})]})}),(0,G.jsxs)(zd,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`settings.filamentTrackingDesc`)}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>i(!1),className:`p-3 rounded-lg border-2 text-left transition-colors ${r?`border-bambu-dark-tertiary bg-bambu-dark hover:border-bambu-gray/50`:`border-bambu-green bg-bambu-green/10`}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1.5`,children:[(0,G.jsx)(Sl,{className:`w-4 h-4 ${r?`text-bambu-gray`:`text-bambu-green`}`}),(0,G.jsx)(`span`,{className:`text-sm font-medium ${r?`text-bambu-gray`:`text-white`}`,children:e(`settings.trackingModeBuiltIn`)})]}),(0,G.jsx)(`p`,{className:`text-xs ${r?`text-bambu-gray/60`:`text-bambu-gray`}`,children:e(`settings.trackingModeBuiltInDesc`)}),!r&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1 mt-2`,children:[(0,G.jsx)(fs,{className:`w-3 h-3 text-bambu-green`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-green`,children:e(`common.enabled`)})]})]}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>i(!0),className:`p-3 rounded-lg border-2 text-left transition-colors ${r?`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary bg-bambu-dark hover:border-bambu-gray/50`}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1.5`,children:[(0,G.jsx)(nc,{className:`w-4 h-4 ${r?`text-bambu-green`:`text-bambu-gray`}`}),(0,G.jsx)(`span`,{className:`text-sm font-medium ${r?`text-white`:`text-bambu-gray`}`,children:`Spoolman`})]}),(0,G.jsx)(`p`,{className:`text-xs ${r?`text-bambu-gray`:`text-bambu-gray/60`}`,children:e(`settings.trackingModeSpoolmanDesc`)}),r&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1 mt-2`,children:[(0,G.jsx)(fs,{className:`w-3 h-3 text-bambu-green`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-green`,children:e(`common.enabled`)})]})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`pr-4`,children:[(0,G.jsx)(`p`,{className:`text-white`,children:e(`settings.autoAddUnknownRfid`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`settings.autoAddUnknownRfidDesc`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:p,onChange:e=>m(e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),!r&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsx)(`div`,{className:`p-3 bg-bambu-green/5 border border-bambu-green/20 rounded-lg`,children:(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Uc,{className:`w-4 h-4 text-bambu-green flex-shrink-0 mt-0.5`}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray`,children:(0,G.jsxs)(`ul`,{className:`list-disc list-inside space-y-0.5`,children:[(0,G.jsx)(`li`,{children:e(`settings.builtInFeatureRfid`)}),(0,G.jsx)(`li`,{children:e(`settings.builtInFeatureUsage`)}),(0,G.jsx)(`li`,{children:e(`settings.builtInFeatureCatalog`)}),(0,G.jsx)(`li`,{children:e(`settings.builtInFeatureThirdParty`)})]})})]})}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>C(!0),disabled:L.isPending,children:[L.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 mr-2 animate-spin`}):(0,G.jsx)(Vl,{className:`w-4 h-4 mr-2`}),e(`settings.amsSyncButton`)]})]}),r&&(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`div`,{className:`p-3 bg-blue-50 dark:bg-blue-500/10 border border-blue-300 dark:border-blue-500/30 rounded-lg`,children:(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Uc,{className:`w-4 h-4 text-blue-600 dark:text-blue-400 flex-shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{className:`text-xs text-blue-700 dark:text-blue-300`,children:[(0,G.jsx)(`p`,{className:`font-medium mb-1`,children:e(`settings.howSyncWorks`)}),(0,G.jsxs)(`ul`,{className:`list-disc list-inside space-y-0.5 text-blue-700/90 dark:text-blue-300/80`,children:[(0,G.jsx)(`li`,{children:e(`settings.syncInfoRfidOnly`)}),(0,G.jsx)(`li`,{children:e(`settings.syncInfoAutoCreate`)}),(0,G.jsx)(`li`,{children:e(`settings.syncInfoThirdPartySkipped`)})]}),(0,G.jsx)(`p`,{className:`font-medium mt-2 mb-1`,children:e(`settings.linkingExistingSpools`)}),(0,G.jsx)(`p`,{className:`text-blue-700/90 dark:text-blue-300/80`,children:e(`settings.linkingExistingSpoolsDesc`)})]})]})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:e(`settings.spoolmanUrl`)}),(0,G.jsx)(`input`,{type:`text`,placeholder:`http://192.168.1.100:7912`,value:a,onChange:e=>o(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray/50 focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`settings.spoolmanUrlHint`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:e(`settings.syncMode`)}),(0,G.jsxs)(`select`,{value:s,onChange:e=>c(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`auto`,children:e(`settings.syncModeAuto`)}),(0,G.jsx)(`option`,{value:`manual`,children:e(`settings.syncModeManual`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(s===`auto`?`settings.syncModeAutoDesc`:`settings.syncModeManualDesc`)})]}),s===`auto`&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:e(`spoolman.disableWeightSync`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`spoolman.disableWeightSyncDesc`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:l,onChange:e=>u(e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),l&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:e(`spoolman.reportPartialUsage`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`spoolman.reportPartialUsageDesc`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:d,onChange:e=>f(e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[e(`settings.status`),`:`]}),k?(0,G.jsx)(Y,{className:`w-4 h-4 text-bambu-gray animate-spin`}):O?.connected?(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-sm text-green-500`,children:[(0,G.jsx)(fs,{className:`w-4 h-4`}),e(`settings.spoolmanConnected`)]}):(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-sm text-red-500`,children:[(0,G.jsx)(td,{className:`w-4 h-4`}),e(`settings.spoolmanDisconnected`)]})]}),(0,G.jsx)(`div`,{className:`flex gap-2`,children:!O?.connected&&(0,G.jsxs)(Q,{size:`sm`,onClick:()=>N.mutate(),disabled:N.isPending||!a,children:[N.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Yc,{className:`w-4 h-4`}),e(`settings.connect`)]})})]}),N.isError&&(0,G.jsx)(`div`,{className:`mb-3 p-2 bg-red-100 dark:bg-red-500/20 border border-red-300 dark:border-red-500/50 rounded text-sm text-red-700 dark:text-red-400`,children:N.error.message}),O?.connected&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:e(`settings.syncAmsData`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:e(`settings.syncAmsDataDesc`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsxs)(`select`,{value:h,onChange:e=>g(e.target.value===`all`?`all`:Number(e.target.value)),className:`w-full px-3 py-2 pr-8 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:[(0,G.jsx)(`option`,{value:`all`,children:e(`settings.allPrinters`)}),j?.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]}),(0,G.jsx)(ps,{className:`absolute right-2 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:I,disabled:z,children:[z?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Vl,{className:`w-4 h-4`}),e(`spoolman.sync`)]})]})]}),O?.connected&&(0,G.jsx)(`div`,{className:`mt-4 pt-4 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:e(`settings.spoolmanAmsSyncButton`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:e(`settings.spoolmanAmsSyncMessage`)})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>T(!0),disabled:R.isPending,children:[R.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Vl,{className:`w-4 h-4`}),R.isPending?e(`settings.spoolmanAmsSyncing`):e(`settings.spoolmanAmsSyncButton`)]})]})}),V&&B&&(0,G.jsxs)(`div`,{className:`mt-3 space-y-2`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded text-sm ${B.success?`bg-green-100 dark:bg-green-500/20 border border-green-300 dark:border-green-500/50 text-green-700 dark:text-green-400`:`bg-yellow-100 dark:bg-yellow-500/20 border border-yellow-300 dark:border-yellow-500/50 text-yellow-700 dark:text-yellow-400`}`,children:B.success?`Synced ${B.synced_count} spool${B.synced_count===1?``:`s`} successfully`:`Synced ${B.synced_count} spool${B.synced_count===1?``:`s`} with ${B.errors.length} error${B.errors.length===1?``:`s`}`}),B.skipped_count>0&&(0,G.jsxs)(`div`,{className:`p-2 bg-amber-50 dark:bg-amber-500/10 border border-amber-300 dark:border-amber-500/30 rounded text-sm`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-amber-700 dark:text-amber-400 mb-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(Iu,{className:`w-3.5 h-3.5`}),(0,G.jsxs)(`span`,{className:`font-medium`,children:[B.skipped_count,` spool`,B.skipped_count===1?``:`s`,` skipped`]})]}),B.skipped_count>5&&(0,G.jsx)(`button`,{onClick:()=>x(!b),className:`text-xs text-amber-700 dark:text-amber-400 hover:text-amber-800 dark:hover:text-amber-300 underline`,children:b?`Show less`:`Show all`})]}),(0,G.jsxs)(`ul`,{className:`text-xs text-amber-700/90 dark:text-amber-300/80 space-y-0.5`,children:[(b?B.skipped:B.skipped.slice(0,5)).map((e,t)=>(0,G.jsxs)(`li`,{className:`flex items-center gap-2`,children:[e.color&&(0,G.jsx)(`span`,{className:`w-3 h-3 rounded-full border border-black/20`,style:{backgroundColor:`#${e.color}`}}),(0,G.jsx)(`span`,{children:e.location}),(0,G.jsxs)(`span`,{className:`text-amber-700/70 dark:text-amber-300/60`,children:[`- `,e.reason]})]},t)),!b&&B.skipped_count>5&&(0,G.jsxs)(`li`,{className:`text-amber-700/70 dark:text-amber-300/60 italic`,children:[`...and `,B.skipped_count-5,` more`]})]})]}),B.errors.length>0&&(0,G.jsxs)(`div`,{className:`p-2 bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 rounded text-sm`,children:[(0,G.jsx)(`div`,{className:`text-red-700 dark:text-red-400 font-medium mb-1`,children:`Errors:`}),(0,G.jsx)(`ul`,{className:`text-xs text-red-700/90 dark:text-red-300/80 space-y-0.5`,children:B.errors.map((e,t)=>(0,G.jsx)(`li`,{children:e},t))})]})]})]})]})]}),S&&(0,G.jsx)(rf,{title:e(`settings.amsSyncTitle`),message:e(`settings.amsSyncMessage`),confirmText:e(`settings.amsSyncButton`),variant:`warning`,isLoading:L.isPending,loadingText:e(`settings.amsSyncing`),onConfirm:()=>L.mutate(),onCancel:()=>C(!1)}),w&&(0,G.jsx)(rf,{title:e(`settings.spoolmanAmsSyncTitle`),message:e(`settings.spoolmanAmsSyncMessage`),confirmText:e(`settings.spoolmanAmsSyncButton`),variant:`warning`,isLoading:R.isPending,loadingText:e(`settings.spoolmanAmsSyncing`),onConfirm:()=>R.mutate(),onCancel:()=>T(!1)})]})}function HWe(){let{t:e}=U(),{showToast:t}=Gd(),[n,r]=(0,y.useState)([]),[i,a]=(0,y.useState)(!0),[o,s]=(0,y.useState)(``),c=(0,y.useRef)(null),[l,u]=(0,y.useState)(!1),[d,f]=(0,y.useState)(null),[p,m]=(0,y.useState)(``),[h,g]=(0,y.useState)(``),[_,v]=(0,y.useState)(!1),[b,x]=(0,y.useState)(new Set),[S,C]=(0,y.useState)(!1),[w,T]=(0,y.useState)(null),[E,D]=(0,y.useState)(!1),O=(0,y.useCallback)(async()=>{try{r(await Z.getSpoolCatalog())}catch(n){console.error(`SpoolCatalogSettings.loadCatalog failed:`,n),t(e(`settings.catalog.loadFailed`),`error`)}finally{a(!1)}},[t,e]);(0,y.useEffect)(()=>{O()},[O]);let k=n.filter(e=>e.name.toLowerCase().includes(o.toLowerCase())),A=async()=>{if(!p.trim()||!h){t(e(`settings.catalog.nameWeightRequired`),`error`);return}v(!0);try{let n=await Z.addCatalogEntry({name:p.trim(),weight:parseInt(h)});r(e=>[...e,n].sort((e,t)=>e.name.localeCompare(t.name))),u(!1),m(``),g(``),t(e(`settings.catalog.entryAdded`),`success`)}catch(n){console.error(`SpoolCatalogSettings.handleAdd failed:`,n),t(e(`settings.catalog.addFailed`),`error`)}finally{v(!1)}},j=e=>{f(e.id),m(e.name),g(e.weight.toString())},M=()=>{f(null),m(``),g(``)},N=async n=>{if(!p.trim()||!h){t(e(`settings.catalog.nameWeightRequired`),`error`);return}v(!0);try{let i=await Z.updateCatalogEntry(n,{name:p.trim(),weight:parseInt(h)});r(e=>e.map(e=>e.id===n?i:e).sort((e,t)=>e.name.localeCompare(t.name))),f(null),m(``),g(``),t(e(`settings.catalog.entryUpdated`),`success`)}catch(n){console.error(`SpoolCatalogSettings.handleUpdate failed:`,n),t(e(`settings.catalog.updateFailed`),`error`)}finally{v(!1)}},P=async()=>{if(w)try{await Z.deleteCatalogEntry(w.id),r(e=>e.filter(e=>e.id!==w.id)),t(e(`settings.catalog.entryDeleted`),`success`)}catch(n){console.error(`SpoolCatalogSettings.handleDelete failed:`,n),t(e(`settings.catalog.deleteFailed`),`error`)}finally{T(null)}},F=async()=>{D(!1),a(!0);try{await Z.resetSpoolCatalog(),await O(),t(e(`settings.catalog.resetSuccess`),`success`)}catch(n){console.error(`SpoolCatalogSettings.handleReset failed:`,n),t(e(`settings.catalog.resetFailed`),`error`),a(!1)}},I=e=>{x(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})};return(0,G.jsxs)(Ld,{id:`card-spool-catalog`,children:[(0,G.jsxs)(Rd,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3`,children:[(0,G.jsx)(Ws,{className:`w-5 h-5 text-bambu-gray`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`settings.catalog.spoolCatalog`)}),(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[`(`,n.length,`)`]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-wrap`,children:[(0,G.jsxs)(`button`,{onClick:()=>{let r=n.map(({name:e,weight:t})=>({name:e,weight:t})),i=new Blob([JSON.stringify(r,null,2)],{type:`application/json`}),a=URL.createObjectURL(i),o=document.createElement(`a`);o.href=a,o.download=`spool-catalog.json`,document.body.appendChild(o),o.click(),document.body.removeChild(o),URL.revokeObjectURL(a),t(e(`settings.catalog.exported`,{count:n.length}),`success`)},className:`px-3 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray hover:text-white transition-colors flex items-center gap-1.5`,title:e(`settings.catalog.exportTooltip`),children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.export`)})]}),(0,G.jsxs)(`button`,{onClick:()=>c.current?.click(),className:`px-3 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray hover:text-white transition-colors flex items-center gap-1.5`,title:e(`settings.catalog.importTooltip`),children:[(0,G.jsx)(Bu,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.import`)})]}),(0,G.jsx)(`input`,{ref:c,type:`file`,accept:`.json`,className:`hidden`,onChange:async i=>{let a=i.target.files?.[0];if(a){try{let i=await a.text(),o=JSON.parse(i);if(!Array.isArray(o))throw Error(`Invalid format`);let s=0,c=0;for(let e of o){if(!e.name||typeof e.weight!=`number`){c++;continue}if(n.some(t=>t.name.toLowerCase()===e.name.toLowerCase())){c++;continue}try{let t=await Z.addCatalogEntry({name:e.name,weight:e.weight});r(e=>[...e,t].sort((e,t)=>e.name.localeCompare(t.name))),s++}catch(e){console.error(`SpoolCatalogSettings import item failed:`,e),c++}}t(e(`settings.catalog.imported`,{added:s,skipped:c}),`success`)}catch(n){console.error(`SpoolCatalogSettings.handleImport failed:`,n),t(e(`settings.catalog.importFailed`),`error`)}c.current&&(c.current.value=``)}}}),(0,G.jsxs)(`button`,{onClick:()=>D(!0),className:`px-3 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray hover:text-white transition-colors flex items-center gap-1.5`,title:e(`settings.catalog.resetTooltip`),children:[(0,G.jsx)(Ul,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.reset`)})]}),(0,G.jsxs)(`button`,{onClick:()=>u(!0),className:`px-3 py-1.5 text-sm bg-bambu-green text-white rounded-lg hover:bg-bambu-green/80 transition-colors flex items-center gap-1.5`,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.add`)})]})]}),b.size>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mt-2 px-3 py-2 bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 rounded-lg`,children:[(0,G.jsx)(`span`,{className:`text-sm text-red-700 dark:text-red-400`,children:e(`settings.catalog.selectedCount`,{count:b.size})}),(0,G.jsxs)(`button`,{onClick:()=>C(!0),className:`ml-auto px-3 py-1.5 text-sm bg-red-500 text-white rounded-lg hover:bg-red-600 transition-colors flex items-center gap-1.5`,children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),e(`settings.catalog.deleteSelected`)]}),(0,G.jsx)(`button`,{onClick:()=>x(new Set),className:`px-3 py-1.5 text-sm text-bambu-gray hover:text-white transition-colors`,children:e(`common.cancel`)})]})]}),(0,G.jsxs)(zd,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`settings.catalog.spoolCatalogDescription`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,className:`w-full pl-10 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`,placeholder:e(`settings.catalog.searchCatalog`),value:o,onChange:e=>s(e.target.value)})]}),l&&(0,G.jsxs)(`div`,{className:`p-4 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white mb-3`,children:e(`settings.catalog.addNewEntry`)}),(0,G.jsxs)(`div`,{className:`flex gap-2 items-center`,children:[(0,G.jsx)(`div`,{className:`flex-1 min-w-0`,children:(0,G.jsx)(`input`,{type:`text`,className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`,placeholder:e(`settings.catalog.namePlaceholder`),value:p,onChange:e=>m(e.target.value)})}),(0,G.jsx)(`input`,{type:`number`,className:`w-20 px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white text-center focus:border-bambu-green focus:outline-none`,placeholder:`g`,value:h,onChange:e=>g(e.target.value)}),(0,G.jsx)(`span`,{className:`text-bambu-gray shrink-0`,children:`g`}),(0,G.jsxs)(`button`,{onClick:A,disabled:_,className:`px-3 py-2 bg-bambu-green text-white rounded-lg hover:bg-bambu-green/80 flex items-center gap-1 shrink-0`,children:[_?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(fs,{className:`w-4 h-4`}),e(`common.add`)]}),(0,G.jsx)(`button`,{onClick:()=>{u(!1),m(``),g(``)},className:`p-2 rounded-lg text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]})]}),i?(0,G.jsxs)(`div`,{className:`flex items-center justify-center py-8 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-5 h-5 animate-spin mr-2`}),e(`common.loading`)]}):(0,G.jsx)(`div`,{className:`max-h-[600px] overflow-y-auto border border-bambu-dark-tertiary rounded-lg`,children:(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{className:`bg-bambu-dark sticky top-0`,children:(0,G.jsxs)(`tr`,{children:[(0,G.jsx)(`th`,{className:`px-2 py-2 w-10`,children:(0,G.jsx)(`input`,{type:`checkbox`,checked:k.length>0&&b.size===k.length,onChange:()=>{b.size===k.length?x(new Set):x(new Set(k.map(e=>e.id)))},className:`w-4 h-4 accent-bambu-green cursor-pointer`})}),(0,G.jsx)(`th`,{className:`px-4 py-2 text-left text-bambu-gray font-medium`,children:e(`common.name`)}),(0,G.jsx)(`th`,{className:`px-4 py-2 text-right text-bambu-gray font-medium w-24`,children:e(`settings.catalog.weight`)}),(0,G.jsx)(`th`,{className:`px-4 py-2 text-center text-bambu-gray font-medium w-20`,children:e(`settings.catalog.type`)}),(0,G.jsx)(`th`,{className:`px-4 py-2 w-24`})]})}),(0,G.jsx)(`tbody`,{children:k.length===0?(0,G.jsx)(`tr`,{children:(0,G.jsx)(`td`,{colSpan:5,className:`px-4 py-8 text-center text-bambu-gray`,children:e(o?`settings.catalog.noMatch`:`settings.catalog.empty`)})}):k.map(t=>(0,G.jsx)(`tr`,{className:`border-t border-bambu-dark-tertiary hover:bg-bambu-dark ${b.has(t.id)?`bg-bambu-dark`:``}`,children:d===t.id?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`td`,{className:`px-2 py-2`,children:(0,G.jsx)(`input`,{type:`checkbox`,checked:b.has(t.id),onChange:()=>I(t.id),className:`w-4 h-4 accent-bambu-green cursor-pointer`})}),(0,G.jsx)(`td`,{className:`px-4 py-2`,children:(0,G.jsx)(`input`,{type:`text`,className:`w-full px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white focus:border-bambu-green focus:outline-none`,value:p,onChange:e=>m(e.target.value)})}),(0,G.jsx)(`td`,{className:`px-4 py-2`,children:(0,G.jsx)(`input`,{type:`number`,className:`w-full px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-right focus:border-bambu-green focus:outline-none`,value:h,onChange:e=>g(e.target.value)})}),(0,G.jsx)(`td`,{className:`px-4 py-2 text-center`,children:(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`-`})}),(0,G.jsx)(`td`,{className:`px-4 py-2`,children:(0,G.jsxs)(`div`,{className:`flex justify-end gap-1`,children:[(0,G.jsx)(`button`,{onClick:()=>N(t.id),disabled:_,className:`p-1.5 rounded hover:bg-green-500/20 text-green-500`,children:_?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(fs,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:M,className:`p-1.5 rounded hover:bg-bambu-dark-tertiary text-bambu-gray`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]})})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`td`,{className:`px-2 py-2`,children:(0,G.jsx)(`input`,{type:`checkbox`,checked:b.has(t.id),onChange:()=>I(t.id),className:`w-4 h-4 accent-bambu-green cursor-pointer`})}),(0,G.jsx)(`td`,{className:`px-4 py-2 text-white`,children:t.name}),(0,G.jsxs)(`td`,{className:`px-4 py-2 text-right font-mono text-white`,children:[t.weight,`g`]}),(0,G.jsx)(`td`,{className:`px-4 py-2 text-center`,children:t.is_default?(0,G.jsx)(`span`,{className:`text-xs px-2 py-0.5 rounded bg-bambu-dark-tertiary text-bambu-gray`,children:e(`settings.catalog.default`)}):(0,G.jsx)(`span`,{className:`text-xs px-2 py-0.5 rounded bg-bambu-green/20 text-bambu-green`,children:e(`settings.catalog.custom`)})}),(0,G.jsx)(`td`,{className:`px-4 py-2`,children:(0,G.jsxs)(`div`,{className:`flex justify-end gap-1`,children:[(0,G.jsx)(`button`,{onClick:()=>j(t),className:`p-1.5 rounded hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white`,children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>T(t),className:`p-1.5 rounded bg-red-500/10 hover:bg-red-500/20 text-red-500`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})})]})},t.id))})]})})]}),w&&(0,G.jsx)(rf,{title:e(`settings.catalog.deleteEntry`),message:e(`settings.catalog.deleteConfirm`,{name:w.name}),confirmText:e(`common.delete`),variant:`danger`,onConfirm:P,onCancel:()=>T(null)}),S&&(0,G.jsx)(rf,{title:e(`settings.catalog.deleteSelected`),message:e(`settings.catalog.bulkDeleteConfirm`,{count:b.size}),confirmText:e(`common.delete`),variant:`danger`,onConfirm:async()=>{if(C(!1),b.size!==0)try{let n=await Z.bulkDeleteCatalogEntries([...b]);r(e=>e.filter(e=>!b.has(e.id))),x(new Set),t(e(`settings.catalog.bulkDeleted`,{count:n.deleted}),`success`)}catch(n){console.error(`SpoolCatalogSettings.handleBulkDelete failed:`,n),t(e(`settings.catalog.bulkDeleteFailed`),`error`)}},onCancel:()=>C(!1)}),E&&(0,G.jsx)(rf,{title:e(`settings.catalog.resetCatalog`),message:e(`settings.catalog.resetConfirm`),confirmText:e(`common.reset`),variant:`danger`,onConfirm:F,onCancel:()=>D(!1)})]})}function UWe(){let{t:e}=U(),{showToast:t}=Gd(),[n,r]=(0,y.useState)([]),[i,a]=(0,y.useState)(!0),[o,s]=(0,y.useState)(``),[c,l]=(0,y.useState)(``),u=(0,y.useRef)(null),[d,f]=(0,y.useState)(!1),[p,m]=(0,y.useState)(null),[h,g]=(0,y.useState)(``),[_,v]=(0,y.useState)(``),[b,x]=(0,y.useState)(`#FFFFFF`),[S,C]=(0,y.useState)(``),[w,T]=(0,y.useState)(``),[E,D]=(0,y.useState)(``),[O,k]=(0,y.useState)(!1),[A,j]=(0,y.useState)(new Set),[M,N]=(0,y.useState)(!1),[P,F]=(0,y.useState)(!1),[I,L]=(0,y.useState)(null),[R,z]=(0,y.useState)(null),[B,V]=(0,y.useState)(!1),ee=(0,y.useCallback)(async()=>{try{r(await Z.getColorCatalog())}catch{t(e(`settings.colorCatalog.loadFailed`),`error`)}finally{a(!1)}},[t,e]);(0,y.useEffect)(()=>{ee()},[ee]);let te=[...new Set(n.map(e=>e.manufacturer))].sort(),ne=n.filter(e=>{let t=o===``||e.manufacturer.toLowerCase().includes(o.toLowerCase())||e.color_name.toLowerCase().includes(o.toLowerCase())||(e.material?.toLowerCase().includes(o.toLowerCase())??!1),n=c===``||e.manufacturer===c;return t&&n}),re=()=>{g(``),v(``),x(`#FFFFFF`),C(``),T(``),D(``)},ie=async()=>{if(!h.trim()||!_.trim()||!b){t(e(`settings.colorCatalog.fieldsRequired`),`error`);return}k(!0);try{let n=await Z.addColorEntry({manufacturer:h.trim(),color_name:_.trim(),hex_color:b,material:S.trim()||null,extra_colors:w.trim()||null,effect_type:E.trim()||null});r(e=>[...e,n].sort((e,t)=>e.manufacturer.localeCompare(t.manufacturer)||(e.material||``).localeCompare(t.material||``)||e.color_name.localeCompare(t.color_name))),f(!1),re(),t(e(`settings.colorCatalog.colorAdded`),`success`)}catch{t(e(`settings.colorCatalog.addFailed`),`error`)}finally{k(!1)}},ae=e=>{m(e.id),g(e.manufacturer),v(e.color_name),x(e.hex_color),C(e.material||``),T(e.extra_colors||``),D(e.effect_type||``)},oe=()=>{m(null),re()},se=async n=>{if(!h.trim()||!_.trim()||!b){t(e(`settings.colorCatalog.fieldsRequired`),`error`);return}k(!0);try{let i=await Z.updateColorEntry(n,{manufacturer:h.trim(),color_name:_.trim(),hex_color:b,material:S.trim()||null,extra_colors:w.trim()||null,effect_type:E.trim()||null});r(e=>e.map(e=>e.id===n?i:e).sort((e,t)=>e.manufacturer.localeCompare(t.manufacturer)||(e.material||``).localeCompare(t.material||``)||e.color_name.localeCompare(t.color_name))),m(null),re(),t(e(`settings.colorCatalog.colorUpdated`),`success`)}catch{t(e(`settings.colorCatalog.updateFailed`),`error`)}finally{k(!1)}},H=async()=>{if(R)try{await Z.deleteColorEntry(R.id),r(e=>e.filter(e=>e.id!==R.id)),t(e(`settings.colorCatalog.colorDeleted`),`success`)}catch{t(e(`settings.colorCatalog.deleteFailed`),`error`)}finally{z(null)}},ce=async()=>{V(!1),a(!0);try{await Z.resetColorCatalog(),await ee(),t(e(`settings.colorCatalog.resetSuccess`),`success`)}catch{t(e(`settings.colorCatalog.resetFailed`),`error`),a(!1)}},le=async()=>{F(!0),L(null);try{let n={},r=ld();r&&(n.Authorization=`Bearer ${r}`);let i=await fetch(`/api/v1/inventory/colors/sync`,{method:`POST`,headers:n});if(!i.ok)throw Error(`Failed to start sync`);let a=i.body?.getReader();if(!a)throw Error(`No response body`);let o=new TextDecoder,s=``;for(;;){let{done:n,value:r}=await a.read();if(n)break;s+=o.decode(r,{stream:!0});let i=s.split(`
+`);s=i.pop()||``;for(let n of i)if(n.startsWith(`data: `))try{let r=JSON.parse(n.slice(6));r.type===`progress`?L({fetched:r.total_fetched,total:r.total_available}):r.type===`complete`?r.added===0?t(e(`settings.colorCatalog.syncUpToDate`,{count:r.total_fetched}),`success`):t(e(`settings.colorCatalog.syncComplete`,{added:r.added,skipped:r.skipped}),`success`):r.type===`error`&&t(`${e(`settings.colorCatalog.syncError`)}: ${r.error}`,`error`)}catch{}}await ee()}catch{t(e(`settings.colorCatalog.syncFailed`),`error`)}finally{F(!1),L(null)}},ue=e=>{j(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})};return(0,G.jsxs)(Ld,{id:`card-color-catalog`,children:[(0,G.jsxs)(Rd,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3`,children:[(0,G.jsx)(Cl,{className:`w-5 h-5 text-bambu-gray`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`settings.colorCatalog.title`)}),(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[`(`,n.length,`)`]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-wrap`,children:[(0,G.jsxs)(`button`,{onClick:()=>{let r=n.map(({manufacturer:e,color_name:t,hex_color:n,material:r,extra_colors:i,effect_type:a})=>({manufacturer:e,color_name:t,hex_color:n,material:r,extra_colors:i,effect_type:a})),i=new Blob([JSON.stringify(r,null,2)],{type:`application/json`}),a=URL.createObjectURL(i),o=document.createElement(`a`);o.href=a,o.download=`color-catalog.json`,document.body.appendChild(o),o.click(),document.body.removeChild(o),URL.revokeObjectURL(a),t(e(`settings.colorCatalog.exported`,{count:n.length}),`success`)},className:`px-3 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray hover:text-white transition-colors flex items-center gap-1.5`,children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.export`)})]}),(0,G.jsxs)(`button`,{onClick:()=>u.current?.click(),className:`px-3 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray hover:text-white transition-colors flex items-center gap-1.5`,children:[(0,G.jsx)(Bu,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.import`)})]}),(0,G.jsx)(`input`,{ref:u,type:`file`,accept:`.json`,className:`hidden`,onChange:async i=>{let a=i.target.files?.[0];if(a){try{let i=await a.text(),o=JSON.parse(i);if(!Array.isArray(o))throw Error(`Invalid format`);let s=0,c=0;for(let e of o){if(!e.manufacturer||!e.color_name||!e.hex_color){c++;continue}if(n.some(t=>t.manufacturer.toLowerCase()===e.manufacturer.toLowerCase()&&t.color_name.toLowerCase()===e.color_name.toLowerCase()&&(t.material||``).toLowerCase()===(e.material||``).toLowerCase())){c++;continue}try{let t=await Z.addColorEntry({manufacturer:e.manufacturer,color_name:e.color_name,hex_color:e.hex_color,material:e.material||null,extra_colors:e.extra_colors||null,effect_type:e.effect_type||null});r(e=>[...e,t].sort((e,t)=>e.manufacturer.localeCompare(t.manufacturer)||(e.material||``).localeCompare(t.material||``)||e.color_name.localeCompare(t.color_name))),s++}catch{c++}}t(e(`settings.colorCatalog.imported`,{added:s,skipped:c}),`success`)}catch{t(e(`settings.colorCatalog.importFailed`),`error`)}u.current&&(u.current.value=``)}}}),(0,G.jsxs)(`button`,{onClick:le,disabled:P,className:`px-3 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray hover:text-white transition-colors flex items-center gap-1.5`,title:e(`settings.colorCatalog.syncTooltip`),children:[P?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Ps,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:P?I?`${Math.min(I.fetched,I.total)} / ${I.total}`:e(`settings.colorCatalog.starting`):e(`settings.colorCatalog.sync`)})]}),(0,G.jsxs)(`button`,{onClick:()=>V(!0),className:`px-3 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray hover:text-white transition-colors flex items-center gap-1.5`,children:[(0,G.jsx)(Ul,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.reset`)})]}),(0,G.jsxs)(`button`,{onClick:()=>f(!0),className:`px-3 py-1.5 text-sm bg-bambu-green text-white rounded-lg hover:bg-bambu-green/80 transition-colors flex items-center gap-1.5`,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.add`)})]})]}),A.size>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mt-2 px-3 py-2 bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 rounded-lg`,children:[(0,G.jsx)(`span`,{className:`text-sm text-red-700 dark:text-red-400`,children:e(`settings.colorCatalog.selectedCount`,{count:A.size})}),(0,G.jsxs)(`button`,{onClick:()=>N(!0),className:`ml-auto px-3 py-1.5 text-sm bg-red-500 text-white rounded-lg hover:bg-red-600 transition-colors flex items-center gap-1.5`,children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),e(`settings.colorCatalog.deleteSelected`)]}),(0,G.jsx)(`button`,{onClick:()=>j(new Set),className:`px-3 py-1.5 text-sm text-bambu-gray hover:text-white transition-colors`,children:e(`common.cancel`)})]})]}),(0,G.jsxs)(zd,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`settings.colorCatalog.description`)}),(0,G.jsxs)(`div`,{className:`flex gap-2 flex-wrap`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1 min-w-[200px]`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,className:`w-full pl-10 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`,placeholder:e(`settings.colorCatalog.searchColors`),value:o,onChange:e=>s(e.target.value)})]}),(0,G.jsxs)(`select`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,value:c,onChange:e=>l(e.target.value),children:[(0,G.jsx)(`option`,{value:``,children:e(`settings.colorCatalog.allManufacturers`)}),te.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]})]}),d&&(0,G.jsxs)(`div`,{className:`p-4 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white mb-3`,children:e(`settings.colorCatalog.addNewColor`)}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 lg:grid-cols-5 gap-2 items-end`,children:[(0,G.jsx)(`input`,{type:`text`,className:`px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`,placeholder:e(`settings.colorCatalog.manufacturer`),value:h,onChange:e=>g(e.target.value)}),(0,G.jsx)(`input`,{type:`text`,className:`px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`,placeholder:e(`settings.colorCatalog.colorName`),value:_,onChange:e=>v(e.target.value)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`color`,className:`w-20 h-10 rounded cursor-pointer border border-bambu-dark-tertiary`,value:b,onChange:e=>x(e.target.value)}),(0,G.jsx)(`input`,{type:`text`,className:`w-32 px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`,placeholder:`#FFFFFF`,value:b,onChange:e=>x(e.target.value)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`input`,{type:`text`,className:`flex-1 max-w-lg min-w-[200px] px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`,placeholder:e(`settings.colorCatalog.materialOptional`),value:S,onChange:e=>C(e.target.value)}),(0,G.jsxs)(`button`,{onClick:ie,disabled:O,className:`w-24 px-3 py-2 bg-bambu-green text-white rounded-lg hover:bg-bambu-green/80 flex items-center justify-center gap-3`,children:[O?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(fs,{className:`w-4 h-4`}),e(`common.add`)]}),(0,G.jsx)(`button`,{onClick:()=>{f(!1),re()},className:`p-2 ml-2 rounded-lg text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 gap-2 mt-2`,children:[(0,G.jsx)(`input`,{type:`text`,className:`px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white text-sm font-mono placeholder-bambu-gray focus:border-bambu-green focus:outline-none`,placeholder:e(`inventory.extraColorsPlaceholder`),value:w,onChange:e=>T(e.target.value)}),(0,G.jsx)(`select`,{className:`px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,value:E,onChange:e=>D(e.target.value),children:bU.map(t=>(0,G.jsx)(`option`,{value:t.value,children:e(t.labelKey)},t.value||`none`))})]})]}),(o||c)&&(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray`,children:e(`settings.colorCatalog.showing`,{filtered:ne.length,total:n.length})}),i?(0,G.jsxs)(`div`,{className:`flex items-center justify-center py-8 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-5 h-5 animate-spin mr-2`}),e(`common.loading`)]}):(0,G.jsx)(`div`,{className:`max-h-[600px] overflow-auto border border-bambu-dark-tertiary rounded-lg`,children:(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{className:`bg-bambu-dark sticky top-0`,children:(0,G.jsxs)(`tr`,{children:[(0,G.jsx)(`th`,{className:`px-2 py-2 w-10`,children:(0,G.jsx)(`input`,{type:`checkbox`,checked:ne.length>0&&A.size===ne.length,onChange:()=>{A.size===ne.length?j(new Set):j(new Set(ne.map(e=>e.id)))},className:`w-4 h-4 accent-bambu-green cursor-pointer`})}),(0,G.jsx)(`th`,{className:`px-3 py-2 text-left text-bambu-gray font-medium w-12`}),(0,G.jsx)(`th`,{className:`px-3 py-2 text-left text-bambu-gray font-medium`,children:e(`settings.colorCatalog.manufacturer`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 text-left text-bambu-gray font-medium`,children:e(`inventory.material`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 text-left text-bambu-gray font-medium`,children:e(`settings.colorCatalog.colorName`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 text-left text-bambu-gray font-medium w-24`,children:e(`settings.colorCatalog.hex`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 w-16`})]})}),(0,G.jsx)(`tbody`,{children:ne.length===0?(0,G.jsx)(`tr`,{children:(0,G.jsx)(`td`,{colSpan:7,className:`px-3 py-8 text-center text-bambu-gray`,children:e(o||c?`settings.colorCatalog.noMatch`:`settings.colorCatalog.empty`)})}):ne.map(t=>(0,G.jsxs)(y.Fragment,{children:[(0,G.jsx)(`tr`,{className:`border-t border-bambu-dark-tertiary hover:bg-bambu-dark ${A.has(t.id)?`bg-bambu-dark`:``}`,children:p===t.id?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`td`,{className:`px-2 py-2`,children:(0,G.jsx)(`input`,{type:`checkbox`,checked:A.has(t.id),onChange:()=>ue(t.id),className:`w-4 h-4 accent-bambu-green cursor-pointer`})}),(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsx)(`input`,{type:`color`,className:`w-8 h-8 rounded cursor-pointer border border-bambu-dark-tertiary`,value:b,onChange:e=>x(e.target.value)})}),(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsx)(`input`,{type:`text`,className:`w-full px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,value:h,onChange:e=>g(e.target.value)})}),(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsx)(`input`,{type:`text`,className:`w-full px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,value:S,onChange:e=>C(e.target.value)})}),(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsx)(`input`,{type:`text`,className:`w-full px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,value:_,onChange:e=>v(e.target.value)})}),(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsx)(`input`,{type:`text`,className:`w-full px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,value:b,onChange:e=>x(e.target.value)})}),(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsxs)(`div`,{className:`flex justify-end gap-1`,children:[(0,G.jsx)(`button`,{onClick:()=>se(t.id),disabled:O,className:`p-1.5 rounded hover:bg-green-500/20 text-green-500`,children:O?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(fs,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:oe,className:`p-1.5 rounded hover:bg-bambu-dark-tertiary text-bambu-gray`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]})})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`td`,{className:`px-2 py-2`,children:(0,G.jsx)(`input`,{type:`checkbox`,checked:A.has(t.id),onChange:()=>ue(t.id),className:`w-4 h-4 accent-bambu-green cursor-pointer`})}),(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsx)(AW,{rgba:t.hex_color.replace(/^#/,``)+(t.hex_color.length===7?`FF`:``),extraColors:t.extra_colors,effectType:t.effect_type,className:`w-8 h-8`,shape:`square`,title:t.hex_color,effectSize:`table`})}),(0,G.jsx)(`td`,{className:`px-3 py-2 text-white`,children:t.manufacturer}),(0,G.jsx)(`td`,{className:`px-3 py-2 text-bambu-gray`,children:t.material||`-`}),(0,G.jsx)(`td`,{className:`px-3 py-2 text-white`,children:t.color_name}),(0,G.jsx)(`td`,{className:`px-3 py-2 font-mono text-xs text-bambu-gray`,children:t.hex_color}),(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsxs)(`div`,{className:`flex justify-end gap-1`,children:[(0,G.jsx)(`button`,{onClick:()=>ae(t),className:`p-1.5 rounded hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white`,children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>z(t),className:`p-1.5 rounded bg-red-500/10 hover:bg-red-500/20 text-red-500`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})})]})}),p===t.id&&(0,G.jsxs)(`tr`,{className:`border-t border-bambu-dark-tertiary/50 bg-bambu-dark`,children:[(0,G.jsx)(`td`,{colSpan:2}),(0,G.jsx)(`td`,{className:`px-3 py-2`,colSpan:2,children:(0,G.jsx)(`input`,{type:`text`,className:`w-full px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm font-mono focus:border-bambu-green focus:outline-none`,placeholder:e(`inventory.extraColorsPlaceholder`),value:w,onChange:e=>T(e.target.value)})}),(0,G.jsx)(`td`,{className:`px-3 py-2`,colSpan:2,children:(0,G.jsx)(`select`,{className:`w-full px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,value:E,onChange:e=>D(e.target.value),children:bU.map(t=>(0,G.jsx)(`option`,{value:t.value,children:e(t.labelKey)},t.value||`none`))})}),(0,G.jsx)(`td`,{})]})]},t.id))})]})})]}),R&&(0,G.jsx)(rf,{title:e(`settings.colorCatalog.deleteColor`),message:e(`settings.colorCatalog.deleteConfirm`,{name:`${R.manufacturer} - ${R.color_name}`}),confirmText:e(`common.delete`),variant:`danger`,onConfirm:H,onCancel:()=>z(null)}),M&&(0,G.jsx)(rf,{title:e(`settings.colorCatalog.deleteSelected`),message:e(`settings.colorCatalog.bulkDeleteConfirm`,{count:A.size}),confirmText:e(`common.delete`),variant:`danger`,onConfirm:async()=>{if(N(!1),A.size!==0)try{let n=await Z.bulkDeleteColorEntries([...A]);r(e=>e.filter(e=>!A.has(e.id))),j(new Set),t(e(`settings.colorCatalog.bulkDeleted`,{count:n.deleted}),`success`)}catch{t(e(`settings.colorCatalog.bulkDeleteFailed`),`error`)}},onCancel:()=>N(!1)}),B&&(0,G.jsx)(rf,{title:e(`settings.colorCatalog.resetCatalog`),message:e(`settings.colorCatalog.resetConfirm`),confirmText:e(`common.reset`),variant:`danger`,onConfirm:ce,onCancel:()=>V(!1)})]})}function WWe({link:e,onClose:t}){let{t:n}=U(),r=co(),i=!!e,a=(0,y.useRef)(null),[o,s]=(0,y.useState)(e?.name||``),[c,l]=(0,y.useState)(e?.url||``),[u,d]=(0,y.useState)(e?.icon||`link`),[f,p]=(0,y.useState)(e?.open_in_new_tab||!1),[m,h]=(0,y.useState)(!!e?.custom_icon),[g,_]=(0,y.useState)(e?.custom_icon?Z.getExternalLinkIconUrl(e.id):null),[v,b]=(0,y.useState)(null),[x,S]=(0,y.useState)(null);(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&t()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[t]);let C=q({mutationFn:async e=>{let t=await Z.createExternalLink(e);return v?await Z.uploadExternalLinkIcon(t.id,v):t},onSuccess:()=>{r.invalidateQueries({queryKey:[`external-links`]}),t()},onError:e=>{S(e.message)}}),w=q({mutationFn:async t=>{let n=await Z.updateExternalLink(e.id,t);return v?n=await Z.uploadExternalLinkIcon(e.id,v):!m&&e?.custom_icon&&(n=await Z.deleteExternalLinkIcon(e.id)),n},onSuccess:()=>{r.invalidateQueries({queryKey:[`external-links`]}),t()},onError:e=>{S(e.message)}}),T=e=>{let t=e.target.files?.[0];if(t){if(![`image/png`,`image/jpeg`,`image/gif`,`image/svg+xml`,`image/webp`,`image/x-icon`].includes(t.type)){S(`Please select a valid image file (PNG, JPG, GIF, SVG, WebP, or ICO)`);return}if(t.size>1024*1024){S(`Image file must be less than 1MB`);return}b(t),h(!0);let e=new FileReader;e.onload=e=>{_(e.target?.result)},e.readAsDataURL(t)}},E=()=>{b(null),_(null),h(!1),a.current&&(a.current.value=``)},D=e=>{if(e.preventDefault(),S(null),!o.trim()){S(`Name is required`);return}if(!c.trim()){S(`URL is required`);return}if(!c.startsWith(`http://`)&&!c.startsWith(`https://`)){S(`URL must start with http:// or https://`);return}let t={name:o.trim(),url:c.trim(),icon:u,open_in_new_tab:f};i?w.mutate(t):C.mutate(t)},O=C.isPending||w.isPending,k=cf(u);return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:t,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-md`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-full bg-bambu-green/20 text-bambu-green`,children:m&&g?(0,G.jsx)(`img`,{src:g,alt:``,className:`w-5 h-5 rounded`}):(0,G.jsx)(k,{className:`w-5 h-5`})}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i?`Edit Link`:`Add External Link`})]}),(0,G.jsx)(`button`,{onClick:t,className:`text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`form`,{onSubmit:D,className:`p-6 space-y-4`,children:[x&&(0,G.jsx)(`div`,{className:`p-3 bg-red-100 dark:bg-red-500/20 border border-red-300 dark:border-red-500/50 rounded-lg text-sm text-red-700 dark:text-red-400`,children:x}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:`Name *`}),(0,G.jsx)(`input`,{type:`text`,value:o,onChange:e=>s(e.target.value),placeholder:`My Link`,maxLength:50,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:`URL *`}),(0,G.jsx)(`input`,{type:`text`,value:c,onChange:e=>l(e.target.value),placeholder:`https://example.com`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`label`,{className:`text-sm text-bambu-gray`,children:n(`externalLinks.openInNewTab`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>p(!f),className:`relative inline-flex h-6 w-11 items-center rounded-full transition-colors ${f?`bg-bambu-green`:`bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(`span`,{className:`inline-block h-4 w-4 transform rounded-full bg-white transition-transform ${f?`translate-x-6`:`translate-x-1`}`})})]}),(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray`,children:`Icon`}),(0,G.jsxs)(`div`,{className:`p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:`Custom Icon`}),(0,G.jsx)(`input`,{ref:a,type:`file`,accept:`image/png,image/jpeg,image/gif,image/svg+xml,image/webp,image/x-icon`,className:`hidden`,onChange:T}),m&&g?(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`img`,{src:g,alt:`Custom icon`,className:`w-8 h-8 rounded border border-bambu-dark-tertiary`}),(0,G.jsx)(`button`,{type:`button`,onClick:E,className:`p-1 text-red-700 dark:text-red-400 hover:text-red-800 dark:hover:text-red-300 transition-colors`,title:`Remove custom icon`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]}):(0,G.jsxs)(Q,{type:`button`,variant:`secondary`,size:`sm`,onClick:()=>a.current?.click(),children:[(0,G.jsx)(Bu,{className:`w-4 h-4`}),`Upload`]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:`PNG, JPG, GIF, SVG, WebP, or ICO. Max 1MB.`})]}),!m&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray block mb-2`,children:`Or choose a preset icon`}),(0,G.jsx)(lf,{value:u,onChange:d})]})]}),(0,G.jsxs)(`div`,{className:`flex gap-3 pt-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:t,className:`flex-1`,children:`Cancel`}),(0,G.jsxs)(Q,{type:`submit`,disabled:O,className:`flex-1`,children:[O?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Kl,{className:`w-4 h-4`}),i?`Save`:`Add`]})]})]})]})})}function GWe(){let{t:e}=U(),t=co(),{authEnabled:n,hasPermission:r}=jd(),{showToast:i}=Gd(),[a,o]=(0,y.useState)(!1),[s,c]=(0,y.useState)(null),[l,u]=(0,y.useState)(null),[d,f]=(0,y.useState)(null),[p,m]=(0,y.useState)(null),[h,g]=(0,y.useState)(om),[_,v]=(0,y.useState)(()=>im(cm.map(e=>e.id))),{data:b,isLoading:x}=K({queryKey:[`external-links`],queryFn:Z.getExternalLinks}),S=q({mutationFn:e=>Z.deleteExternalLink(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`external-links`]})}}),{data:C}=K({queryKey:[`settings`],queryFn:Z.getSettings,enabled:n&&r(`settings:update`)}),w=q({mutationFn:e=>Z.updateSettings({default_sidebar_order:e}),onSuccess:(n,r)=>{t.invalidateQueries({queryKey:[`settings`]}),t.invalidateQueries({queryKey:[`default-sidebar-order`]}),i(e(r?`settings.sidebarDefaultSet`:`settings.sidebarDefaultCleared`),`success`)},onError:()=>{i(e(`settings.sidebarDefaultFailed`),`error`)}}),T=(0,y.useMemo)(()=>{let e=new Map(cm.map(e=>[e.id,e])),t=new Map((b||[]).map(e=>[`ext-${e.id}`,e])),n=[],r=new Set,i=i=>{if(r.has(i))return;let a=e.get(i);if(a){n.push({type:`system`,id:i,navItem:a}),r.add(i);return}let o=t.get(i);o&&(n.push({type:`external`,id:i,link:o}),r.add(i))};return _.forEach(i),cm.forEach(e=>i(e.id)),(b||[]).forEach(e=>i(`ext-${e.id}`)),n},[b,_]),E=e=>{v(e),am(e)},D=(e,t)=>{f(t),e.dataTransfer.effectAllowed=`move`,e.dataTransfer.setData(`text/plain`,t)},O=(e,t)=>{e.preventDefault(),e.dataTransfer.dropEffect=`move`,m(t)},k=(e,t)=>{if(e.preventDefault(),d===null||d===t){f(null),m(null);return}let n=T.map(e=>e.id),r=n.indexOf(d),i=n.indexOf(t);if(r===-1||i===-1){f(null),m(null);return}n.splice(r,1),n.splice(i,0,d),E(n),f(null),m(null)},A=()=>{f(null),m(null)},j=e=>{u(e)},M=()=>{l&&(S.mutate(l.id),u(null))},N=()=>{let e=[...cm.map(e=>e.id),...(b||[]).map(e=>`ext-${e.id}`)];g([]),v(e),sm([]),am(e)},P=e=>{let t=T.map(e=>e.id);w.mutate(e?JSON.stringify({order:t,hiddenSystemItemIds:h}):``)},F=e=>{if(e===`settings`)return;let t=h.includes(e)?h.filter(t=>t!==e):[...h,e];g(t),sm(t)},I=n&&r(`settings:update`),L=!!C?.default_sidebar_order;return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(Ld,{id:`card-sidebar-links`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center justify-between gap-y-2 gap-x-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Yc,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`externalLinks.sidebarLayout`)})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2`,children:[I&&(0,G.jsxs)(`label`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(`span`,{children:e(`settings.setDefault`)}),(0,G.jsx)(hU,{checked:L,onChange:P,disabled:w.isPending})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:N,className:`whitespace-nowrap`,children:[(0,G.jsx)(Ul,{className:`w-4 h-4`}),e(`settings.reset`)]}),(0,G.jsxs)(Q,{size:`sm`,onClick:()=>o(!0),className:`whitespace-nowrap`,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),`Add Link`]})]})]})}),(0,G.jsxs)(zd,{children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4`,children:e(`externalLinks.sidebarLayoutDescription`)}),x?(0,G.jsx)(`div`,{className:`flex justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})}):(0,G.jsx)(`div`,{className:`space-y-2`,children:T.map(t=>{let n=t.type===`system`&&h.includes(t.id),r=t.id===`settings`;if(t.type===`system`){let i=t.navItem.icon;return(0,G.jsxs)(`div`,{draggable:!0,onDragStart:e=>D(e,t.id),onDragOver:e=>O(e,t.id),onDragLeave:()=>m(null),onDrop:e=>k(e,t.id),onDragEnd:A,className:`relative flex items-center gap-3 p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary transition-colors ${d===t.id?`opacity-50`:n?`opacity-60`:``} ${p===t.id&&d!==t.id?`before:absolute before:left-3 before:right-3 before:top-0 before:h-0.5 before:bg-bambu-green`:``}`,children:[(0,G.jsx)(Ac,{className:`w-6 h-6 md:w-4 md:h-4 text-bambu-gray cursor-grab flex-shrink-0`}),(0,G.jsx)(`div`,{className:`p-2 rounded-lg bg-bambu-dark-tertiary text-bambu-gray`,children:(0,G.jsx)(i,{className:`w-4 h-4`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`span`,{className:`text-white font-medium truncate block`,children:e(t.navItem.labelKey)}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray truncate block`,children:e(r?`externalLinks.requiredInSidebar`:n?`externalLinks.hiddenFromSidebar`:`externalLinks.visibleInSidebar`)})]}),(0,G.jsx)(`button`,{onClick:()=>F(t.id),disabled:r,className:`p-2 rounded-lg hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white transition-colors flex-shrink-0 disabled:opacity-40 disabled:cursor-not-allowed disabled:hover:bg-transparent disabled:hover:text-bambu-gray`,title:e(r?`externalLinks.settingsCannotBeHidden`:n?`externalLinks.showPage`:`externalLinks.hidePage`),"aria-label":e(r?`externalLinks.settingsCannotBeHidden`:n?`externalLinks.showPage`:`externalLinks.hidePage`),children:n?(0,G.jsx)(rc,{className:`w-4 h-4`}):(0,G.jsx)(ic,{className:`w-4 h-4`})})]},t.id)}let i=t.link,a=cf(i.icon);return(0,G.jsxs)(`div`,{draggable:!0,onDragStart:e=>D(e,t.id),onDragOver:e=>O(e,t.id),onDragLeave:()=>m(null),onDrop:e=>k(e,t.id),onDragEnd:A,className:`relative flex items-center gap-3 p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary transition-colors ${d===t.id?`opacity-50`:``} ${p===t.id&&d!==t.id?`before:absolute before:left-3 before:right-3 before:top-0 before:h-0.5 before:bg-bambu-green`:``}`,children:[(0,G.jsx)(Ac,{className:`w-6 h-6 md:w-4 md:h-4 text-bambu-gray cursor-grab flex-shrink-0`}),(0,G.jsx)(`div`,{className:`p-2 rounded-lg bg-bambu-dark-tertiary text-bambu-gray`,children:i.custom_icon?(0,G.jsx)(`img`,{src:Z.getExternalLinkIconUrl(i.id),alt:``,className:`w-4 h-4`}):(0,G.jsx)(a,{className:`w-4 h-4`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-white font-medium truncate`,children:i.name}),(0,G.jsx)(nc,{className:`w-3 h-3 text-bambu-gray flex-shrink-0`})]}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray truncate block`,children:i.url})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 flex-shrink-0`,children:[(0,G.jsx)(`button`,{onClick:()=>c(i),className:`p-2 rounded-lg hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white transition-colors`,title:e(`common.edit`),children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>j(i),disabled:S.isPending,className:`p-2 rounded-lg hover:bg-red-100 dark:hover:bg-red-500/20 text-bambu-gray hover:text-red-900 dark:hover:text-red-400 transition-colors disabled:opacity-50`,title:e(`externalLinks.deleteLink`),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})]},t.id)})})]})]}),(a||s)&&(0,G.jsx)(WWe,{link:s,onClose:()=>{o(!1),c(null)}}),l&&(0,G.jsx)(rf,{title:`Delete Link`,message:`Are you sure you want to delete "${l.name}"? This action cannot be undone.`,confirmText:`Delete`,cancelText:`Cancel`,variant:`danger`,onConfirm:M,onCancel:()=>u(null)})]})}async function KWe(e){if(navigator.clipboard&&window.isSecureContext)try{return await navigator.clipboard.writeText(e),!0}catch{}let t=document.createElement(`textarea`);t.value=e,t.style.position=`fixed`,t.style.opacity=`0`,document.body.appendChild(t);try{return t.select(),document.execCommand(`copy`)}catch{return!1}finally{t.parentNode&&t.parentNode.removeChild(t)}}function qWe(e,t,n=`text/plain`){let r=new Blob([e],{type:n}),i=URL.createObjectURL(r),a=document.createElement(`a`);a.href=i,a.download=t,document.body.appendChild(a),a.click(),a.remove(),URL.revokeObjectURL(i)}function JWe({status:e}){return e===`pass`?(0,G.jsx)(Ss,{className:`w-5 h-5 text-bambu-green flex-shrink-0`}):e===`fail`?(0,G.jsx)(Ds,{className:`w-5 h-5 text-red-600 dark:text-red-400 flex-shrink-0`}):e===`warn`?(0,G.jsx)(Iu,{className:`w-5 h-5 text-amber-600 dark:text-amber-400 flex-shrink-0`}):(0,G.jsx)(ws,{className:`w-5 h-5 text-bambu-gray flex-shrink-0`})}function YWe({vpId:e,vpName:t,onClose:n}){let{t:r}=U(),i=q({mutationFn:()=>Cd.diagnose(e)});(0,y.useEffect)(()=>{i.mutate()},[]),(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&n()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[n]);let a=i.data,o=a?.overall===`ok`?`bg-bambu-green/10 border-bambu-green/30 text-bambu-green`:a?.overall===`warnings`?`bg-amber-50 dark:bg-amber-500/10 border-amber-300 dark:border-amber-500/30 text-amber-700 dark:text-amber-300`:`bg-red-50 dark:bg-red-500/10 border-red-300 dark:border-red-500/30 text-red-700 dark:text-red-300`;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:n,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary w-full max-w-lg flex flex-col max-h-[85vh]`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 min-w-0`,children:[(0,G.jsx)(xu,{className:`w-5 h-5 text-bambu-green flex-shrink-0`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white truncate`,children:r(`vpDiagnostic.title`,{name:t})})]}),(0,G.jsx)(`button`,{onClick:n,className:`text-bambu-gray hover:text-white transition-colors`,title:r(`common.close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-6 space-y-4 overflow-y-auto`,children:[i.isPending&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),(0,G.jsx)(`span`,{children:r(`vpDiagnostic.running`)})]}),i.isError&&(0,G.jsx)(`div`,{className:`rounded-lg bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 px-4 py-3 text-sm text-red-700 dark:text-red-300`,children:r(`vpDiagnostic.runFailed`,{error:i.error.message})}),a&&(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`ol`,{className:`space-y-2`,children:a.checks.map(e=>{let t=r(`vpDiagnostic.check.${e.id}.${e.status}`,{...e.params,defaultValue:``});return(0,G.jsxs)(`li`,{className:`flex items-start gap-3 bg-bambu-dark rounded-lg px-4 py-2.5 ${e.status===`skip`?`opacity-60`:``}`,children:[(0,G.jsx)(`div`,{className:`mt-0.5`,children:(0,G.jsx)(JWe,{status:e.status})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-sm text-white`,children:r(`vpDiagnostic.check.${e.id}.title`,e.params)}),t&&(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mt-0.5`,children:t})]})]},e.id)})}),(0,G.jsx)(`div`,{className:`rounded-lg border px-4 py-3 text-sm ${o}`,children:r(`vpDiagnostic.overall.${a.overall}`)})]})]}),(0,G.jsxs)(`div`,{className:`px-6 py-4 border-t border-bambu-dark-tertiary flex justify-end gap-2`,children:[(0,G.jsx)(`button`,{onClick:()=>i.mutate(),disabled:i.isPending,className:`px-4 py-2 bg-bambu-dark hover:bg-bambu-dark-tertiary disabled:opacity-50 text-white text-sm rounded-lg transition-colors`,children:r(`vpDiagnostic.retry`)}),(0,G.jsx)(`button`,{onClick:n,className:`px-4 py-2 bg-bambu-green hover:bg-bambu-green/90 text-white text-sm rounded-lg transition-colors`,children:r(`common.close`)})]})]})})}var t5={archive:`archive`,review:`review`,queue:`queue`,proxy:`proxy`};function n5(e){return e===`immediate`?`archive`:e===`print_queue`||e===`queue`?`queue`:e===`archive`||e===`review`||e===`proxy`?e:`archive`}function XWe({printer:e,models:t}){let{t:n}=U(),r=co(),{showToast:i}=Gd(),[a,o]=(0,y.useState)(!0),[s,c]=(0,y.useState)(e.enabled),[l,u]=(0,y.useState)(e.name),[d,f]=(0,y.useState)(``),[p,m]=(0,y.useState)(n5(e.mode)),[h,g]=(0,y.useState)(e.target_printer_id),[_,v]=(0,y.useState)(e.bind_ip||``),[b,x]=(0,y.useState)(e.remote_interface_ip||``),[S,C]=(0,y.useState)(e.model||``),[w,T]=(0,y.useState)(e.auto_dispatch??!0),[E,D]=(0,y.useState)(e.queue_force_color_match??!1),[O,k]=(0,y.useState)(e.save_ams_mapping??!1),[A,j]=(0,y.useState)(e.gcode_injection??!1),[M,N]=(0,y.useState)(e.tailscale_disabled??!0),[P,F]=(0,y.useState)(!1),[I,L]=(0,y.useState)(null),[R,z]=(0,y.useState)(!1),[B,V]=(0,y.useState)(!1),[ee,te]=(0,y.useState)(!1),{data:ne}=K({queryKey:[`tailscale-status`],queryFn:Cd.getTailscaleStatus,enabled:!M,staleTime:6e4}),re=ne?.available?ne.fqdn:``,ie=ne?.available?ne.tailscale_ips?.[0]??``:``,ae=async e=>{e.stopPropagation();let t=re;t&&(await KWe(t)?(te(!0),i(n(`printers.copied`)),setTimeout(()=>te(!1),2e3)):i(n(`virtualPrinter.toast.copyFailed`),`error`))};(0,y.useEffect)(()=>{I||(c(e.enabled),m(n5(e.mode)),u(e.name),g(e.target_printer_id),v(e.bind_ip||``),x(e.remote_interface_ip||``),C(e.model||``),T(e.auto_dispatch??!0),D(e.queue_force_color_match??!1),k(e.save_ams_mapping??!1),j(e.gcode_injection??!1),N(e.tailscale_disabled??!0))},[e,I]);let{data:oe}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:se}=K({queryKey:[`network-interfaces`],queryFn:()=>Z.getNetworkInterfaces().then(e=>e.interfaces)}),H=q({mutationFn:t=>Cd.update(e.id,t),onSuccess:()=>{r.invalidateQueries({queryKey:[`virtual-printers`]}),i(n(`virtualPrinter.toast.updated`)),L(null)},onError:t=>{i(t.message||n(`virtualPrinter.toast.failedToUpdate`),`error`),c(e.enabled),m(n5(e.mode)),g(e.target_printer_id),v(e.bind_ip||``),N(e.tailscale_disabled??!0),D(e.queue_force_color_match??!1),k(e.save_ams_mapping??!1),j(e.gcode_injection??!1),L(null)}}),ce=q({mutationFn:()=>Cd.remove(e.id),onSuccess:()=>{r.invalidateQueries({queryKey:[`virtual-printers`]}),i(n(`virtualPrinter.toast.deleted`)),z(!1)},onError:e=>{i(e.message||n(`virtualPrinter.toast.failedToDelete`),`error`),z(!1)}}),le=t=>{t.stopPropagation();let r=!s;if(r){if(!_){i(n(`virtualPrinter.toast.bindIpRequired`),`error`);return}if(p===`proxy`){if(!h){i(n(`virtualPrinter.toast.targetPrinterRequired`),`error`);return}}else if(!d&&!e.access_code_set){i(n(`virtualPrinter.toast.accessCodeRequired`),`error`);return}}c(r),L(`toggle`),H.mutate({enabled:r})},ue=()=>{l.trim()&&(L(`name`),H.mutate({name:l.trim()}))},de=()=>{if(!d){i(n(`virtualPrinter.toast.accessCodeEmpty`),`error`);return}if(d.length!==8){i(n(`virtualPrinter.toast.accessCodeLength`),`error`);return}L(`accessCode`),H.mutate({access_code:d}),f(``)},fe=e=>{m(e),L(`mode`),H.mutate({mode:e})},pe=e=>{C(e),L(`model`),H.mutate({model:e})},me=e=>{let t=ve?.access_code,r=oe?.find(t=>t.id===e)?.access_code;g(e),L(`targetPrinter`),H.mutate({target_printer_id:e},{onSuccess:()=>{t&&r&&t!==r&&i(n(`virtualPrinter.toast.targetCodeChangedRebind`),`info`)}})},he=e=>{x(e),L(`remoteInterface`),H.mutate({remote_interface_ip:e})},ge=e.status?.running||!1,_e=n(`virtualPrinter.mode.${t5[p]||`archive`}`),ve=oe?.find(e=>e.id===h),ye=ve?.name,be=!!h,xe=be?ve?.access_code??``:``;return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(Ld,{className:`overflow-hidden`,children:[(0,G.jsxs)(`div`,{className:`px-4 py-3 flex items-center gap-3 cursor-pointer select-none`,onClick:()=>o(!a),children:[(0,G.jsx)(`button`,{className:`text-bambu-gray flex-shrink-0`,children:a?(0,G.jsx)(ps,{className:`w-4 h-4`}):(0,G.jsx)(ms,{className:`w-4 h-4`})}),(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full flex-shrink-0 ${ge?`bg-green-400 animate-pulse`:`bg-gray-500`}`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0 flex flex-wrap items-center gap-x-3 gap-y-1`,children:[(0,G.jsx)(`span`,{className:`text-white font-medium truncate max-w-full`,children:e.name}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray flex-shrink-0`,children:_e}),e.model_name&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray flex-shrink-0`,children:e.model_name}),ye&&(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray truncate max-w-full`,children:[p===`proxy`&&(0,G.jsx)(Ro,{className:`w-3 h-3 inline mr-1`}),ye]}),_&&(0,G.jsx)(`span`,{className:`text-[10px] text-bambu-gray flex-shrink-0 font-mono`,children:_}),b&&(0,G.jsx)(`span`,{className:`text-[10px] text-bambu-gray flex-shrink-0 font-mono`,children:b})]}),(0,G.jsx)(`div`,{className:`ml-auto flex items-center gap-2 flex-shrink-0`,onClick:e=>e.stopPropagation(),children:(0,G.jsx)(`button`,{onClick:le,disabled:I===`toggle`,className:`relative w-10 h-5 rounded-full transition-colors ${s?`bg-bambu-green`:`bg-bambu-dark-tertiary`} ${I===`toggle`?`opacity-50`:``}`,children:(0,G.jsx)(`span`,{className:`absolute top-0.5 left-0.5 w-4 h-4 bg-white rounded-full transition-transform ${s?`translate-x-5`:``}`})})})]}),a&&(0,G.jsxs)(zd,{className:`pt-0 space-y-4`,children:[(0,G.jsx)(`div`,{className:`border-t border-bambu-dark-tertiary`}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`text`,value:l,onChange:e=>u(e.target.value),onBlur:ue,onKeyDown:e=>e.key===`Enter`&&ue(),className:`flex-1 text-sm text-white bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-1.5 focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`button`,{onClick:()=>V(!0),className:`p-1.5 text-bambu-gray hover:text-bambu-green transition-colors flex-shrink-0`,title:n(`vpDiagnostic.runButton`),children:(0,G.jsx)(xu,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>z(!0),className:`p-1.5 text-bambu-gray hover:text-red-600 dark:hover:text-red-400 transition-colors flex-shrink-0`,title:n(`common.delete`),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 -mt-2`,children:[re&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-green-700/80 dark:text-green-400/70 min-w-0`,children:[(0,G.jsx)(iu,{className:`w-3.5 h-3.5 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`font-mono text-xs truncate`,children:ie?`${ie} (${re})`:re}),(0,G.jsx)(`button`,{onClick:ae,className:`p-0.5 rounded hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white transition-colors flex-shrink-0`,title:n(ee?`printers.copied`:`printers.copyToClipboard`),children:ee?(0,G.jsx)(fs,{className:`w-3.5 h-3.5 text-bambu-green`}):(0,G.jsx)(Vs,{className:`w-3.5 h-3.5`})})]}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray font-mono ml-auto flex-shrink-0`,children:e.serial})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium mb-2`,children:n(`virtualPrinter.mode.title`)}),(0,G.jsx)(`div`,{className:`grid grid-cols-2 gap-2`,children:[`archive`,`review`,`queue`,`proxy`].map(e=>(0,G.jsxs)(`button`,{onClick:()=>fe(e),disabled:I===`mode`,className:`p-2 rounded-lg border text-left transition-colors ${p===e?e===`proxy`?`border-blue-500 bg-blue-500/10`:`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-white text-xs font-medium`,children:[e===`proxy`&&(0,G.jsx)(Ro,{className:`w-3 h-3`}),n(`virtualPrinter.mode.${t5[e]}`)]}),(0,G.jsx)(`div`,{className:`text-[10px] text-bambu-gray`,children:n(`virtualPrinter.mode.${t5[e]}Desc`)})]},e))})]}),p===`queue`&&(0,G.jsx)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium`,children:n(`virtualPrinter.autoDispatch.title`)}),(0,G.jsx)(`div`,{className:`text-[10px] text-bambu-gray`,children:n(`virtualPrinter.autoDispatch.description`)})]}),(0,G.jsx)(`button`,{onClick:()=>{let e=!w;T(e),L(`autoDispatch`),H.mutate({auto_dispatch:e})},disabled:I===`autoDispatch`,className:`relative w-10 h-5 rounded-full transition-colors flex-shrink-0 ${w?`bg-bambu-green`:`bg-bambu-dark-tertiary`} ${I===`autoDispatch`?`opacity-50`:``}`,children:(0,G.jsx)(`span`,{className:`absolute top-0.5 left-0.5 w-4 h-4 bg-white rounded-full transition-transform ${w?`translate-x-5`:``}`})})]})}),p===`queue`&&(0,G.jsx)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium`,children:n(`virtualPrinter.queueForceColorMatch.title`)}),(0,G.jsx)(`div`,{className:`text-[10px] text-bambu-gray`,children:n(`virtualPrinter.queueForceColorMatch.description`)})]}),(0,G.jsx)(`button`,{onClick:()=>{let e=!E;D(e),L(`queueForceColorMatch`),H.mutate({queue_force_color_match:e})},disabled:I===`queueForceColorMatch`,className:`relative w-10 h-5 rounded-full transition-colors flex-shrink-0 ${E?`bg-bambu-green`:`bg-bambu-dark-tertiary`} ${I===`queueForceColorMatch`?`opacity-50`:``}`,children:(0,G.jsx)(`span`,{className:`absolute top-0.5 left-0.5 w-4 h-4 bg-white rounded-full transition-transform ${E?`translate-x-5`:``}`})})]})}),p===`queue`&&(0,G.jsx)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium`,children:n(`virtualPrinter.saveAmsMapping.title`)}),(0,G.jsx)(`div`,{className:`text-[10px] text-bambu-gray`,children:n(`virtualPrinter.saveAmsMapping.description`)})]}),(0,G.jsx)(`button`,{onClick:()=>{let e=!O;k(e),L(`saveAmsMapping`),H.mutate({save_ams_mapping:e})},disabled:I===`saveAmsMapping`,className:`relative w-10 h-5 rounded-full transition-colors flex-shrink-0 ${O?`bg-bambu-green`:`bg-bambu-dark-tertiary`} ${I===`saveAmsMapping`?`opacity-50`:``}`,children:(0,G.jsx)(`span`,{className:`absolute top-0.5 left-0.5 w-4 h-4 bg-white rounded-full transition-transform ${O?`translate-x-5`:``}`})})]})}),p===`queue`&&(0,G.jsx)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium`,children:n(`virtualPrinter.gcodeInjection.title`)}),(0,G.jsx)(`div`,{className:`text-[10px] text-bambu-gray`,children:n(`virtualPrinter.gcodeInjection.description`)})]}),(0,G.jsx)(`button`,{onClick:()=>{let e=!A;j(e),L(`gcodeInjection`),H.mutate({gcode_injection:e})},disabled:I===`gcodeInjection`,className:`relative w-10 h-5 rounded-full transition-colors flex-shrink-0 ${A?`bg-bambu-green`:`bg-bambu-dark-tertiary`} ${I===`gcodeInjection`?`opacity-50`:``}`,children:(0,G.jsx)(`span`,{className:`absolute top-0.5 left-0.5 w-4 h-4 bg-white rounded-full transition-transform ${A?`translate-x-5`:``}`})})]})}),(0,G.jsx)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium`,children:n(`virtualPrinter.tailscaleDisabled.title`)}),(0,G.jsx)(`div`,{className:`text-[10px] text-bambu-gray`,children:n(`virtualPrinter.tailscaleDisabled.description`)})]}),(0,G.jsx)(`button`,{onClick:()=>{let e=!M;N(e),L(`tailscaleDisabled`),H.mutate({tailscale_disabled:e})},disabled:I===`tailscaleDisabled`,className:`relative w-10 h-5 rounded-full transition-colors shrink-0 ${M?`bg-bambu-dark-tertiary`:`bg-bambu-green`} ${I===`tailscaleDisabled`?`opacity-50`:``}`,children:(0,G.jsx)(`span`,{className:`absolute top-0.5 left-0.5 w-4 h-4 bg-white rounded-full transition-transform ${M?``:`translate-x-5`}`})})]})}),p!==`proxy`&&(0,G.jsxs)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium mb-1`,children:n(`virtualPrinter.model.title`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:n(`virtualPrinter.model.description`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`select`,{value:S,onChange:e=>pe(e.target.value),disabled:I===`model`,className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-1.5 text-white text-sm appearance-none cursor-pointer disabled:opacity-50 pr-10`,children:Object.entries(t).map(([e,t])=>(0,G.jsxs)(`option`,{value:e,children:[t,` (`,e,`)`]},e))}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]})]}),p===`proxy`&&(0,G.jsx)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2 p-2 rounded bg-blue-50 border border-blue-300 dark:bg-blue-500/10 dark:border-blue-500/30`,children:[(0,G.jsx)(Uc,{className:`w-4 h-4 text-blue-600 dark:text-blue-400 flex-shrink-0 mt-0.5`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`virtualPrinter.proxy.accessCodeHint`)})]})}),p!==`proxy`&&(0,G.jsxs)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-2`,children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium`,children:n(`virtualPrinter.accessCode.title`)}),be?(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-xs text-blue-700 dark:text-blue-400`,children:[(0,G.jsx)(Uc,{className:`w-3 h-3`}),n(`virtualPrinter.accessCode.inheritedFromTarget`)]}):e.access_code_set?(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-xs text-green-700 dark:text-green-400`,children:[(0,G.jsx)(fs,{className:`w-3 h-3`}),n(`virtualPrinter.accessCode.isSet`)]}):(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-xs text-yellow-700 dark:text-yellow-400`,children:[(0,G.jsx)(Iu,{className:`w-3 h-3`}),n(`virtualPrinter.accessCode.notSet`)]})]}),be?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`input`,{type:P?`text`:`password`,value:xe,readOnly:!0,"aria-label":n(`virtualPrinter.accessCode.title`),className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-1.5 text-white text-sm pr-10 font-mono opacity-90 cursor-default`}),(0,G.jsx)(`button`,{onClick:()=>F(!P),className:`absolute right-2 top-1/2 -translate-y-1/2 text-bambu-gray hover:text-white`,"aria-label":n(P?`virtualPrinter.accessCode.hide`:`virtualPrinter.accessCode.reveal`),children:P?(0,G.jsx)(rc,{className:`w-4 h-4`}):(0,G.jsx)(ic,{className:`w-4 h-4`})})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(`virtualPrinter.accessCode.derivedFromTargetHint`)})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsx)(`input`,{type:P?`text`:`password`,value:d,onChange:e=>f(e.target.value),placeholder:e.access_code_set?n(`virtualPrinter.accessCode.placeholderChange`):n(`virtualPrinter.accessCode.placeholder`),maxLength:8,className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-1.5 text-white text-sm placeholder-bambu-gray pr-10 font-mono`}),(0,G.jsx)(`button`,{onClick:()=>F(!P),className:`absolute right-2 top-1/2 -translate-y-1/2 text-bambu-gray hover:text-white`,children:P?(0,G.jsx)(rc,{className:`w-4 h-4`}):(0,G.jsx)(ic,{className:`w-4 h-4`})})]}),(0,G.jsx)(Q,{onClick:de,disabled:!d||I===`accessCode`,variant:`primary`,children:I===`accessCode`?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):n(`common.save`)})]}),d&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:(0,G.jsx)(`span`,{className:d.length===8?`text-green-700 dark:text-green-400`:`text-yellow-700 dark:text-yellow-400`,children:n(`virtualPrinter.accessCode.charCount`,{count:d.length})})})]})]}),(0,G.jsxs)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium mb-2`,children:n(`virtualPrinter.targetPrinter.title`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:h??``,onChange:e=>{let t=parseInt(e.target.value,10);isNaN(t)||me(t)},disabled:I===`targetPrinter`,className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-1.5 text-white text-sm appearance-none cursor-pointer disabled:opacity-50 pr-10`,children:[(0,G.jsx)(`option`,{value:``,children:n(`virtualPrinter.targetPrinter.placeholder`)}),oe?.map(e=>(0,G.jsxs)(`option`,{value:e.id,children:[e.name,` (`,e.ip_address,`)`]},e.id))]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]})]}),(0,G.jsxs)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium mb-1`,children:n(`virtualPrinter.bindIp.title`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:_,onChange:e=>{v(e.target.value),L(`bindIp`),H.mutate({bind_ip:e.target.value})},disabled:I===`bindIp`,className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-1.5 text-white text-sm appearance-none cursor-pointer disabled:opacity-50 pr-10`,children:[(0,G.jsx)(`option`,{value:``,children:n(`virtualPrinter.bindIp.placeholder`)}),se?.map(e=>(0,G.jsxs)(`option`,{value:e.ip,children:[e.name,` (`,e.ip,`)`,e.is_alias?` [alias]`:``,` - `,e.subnet]},e.ip))]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(`virtualPrinter.bindIp.hint`)})]}),(0,G.jsxs)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1`,children:[(0,G.jsx)(`div`,{className:`text-white text-sm font-medium`,children:n(`virtualPrinter.remoteInterface.title`)}),b?(0,G.jsx)(`span`,{className:`flex items-center gap-1 text-xs text-green-700 dark:text-green-400`,children:(0,G.jsx)(fs,{className:`w-3 h-3`})}):(0,G.jsx)(`span`,{className:`flex items-center gap-1 text-xs text-bambu-gray`,title:n(`virtualPrinter.remoteInterface.optional`),children:(0,G.jsx)(Uc,{className:`w-3 h-3`})})]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:b,onChange:e=>he(e.target.value),disabled:I===`remoteInterface`,className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-1.5 text-white text-sm appearance-none cursor-pointer disabled:opacity-50 pr-10`,children:[(0,G.jsx)(`option`,{value:``,children:n(`virtualPrinter.remoteInterface.placeholder`)}),se?.map(e=>(0,G.jsxs)(`option`,{value:e.ip,children:[e.name,` (`,e.ip,`) - `,e.subnet]},e.ip))]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]})]})]})]}),R&&(0,G.jsx)(rf,{title:n(`virtualPrinter.deleteConfirm.title`),message:n(`virtualPrinter.deleteConfirm.message`,{name:e.name}),variant:`danger`,confirmText:n(`common.delete`),isLoading:ce.isPending,onConfirm:()=>ce.mutate(),onCancel:()=>z(!1)}),B&&(0,G.jsx)(YWe,{vpId:e.id,vpName:e.name,onClose:()=>V(!1)})]})}var ZWe={archive:`archive`,review:`review`,queue:`queue`,proxy:`proxy`};function QWe({onClose:e}){let{t}=U(),n=co(),{showToast:r}=Gd(),[i,a]=(0,y.useState)(``),[o,s]=(0,y.useState)(`archive`),[c,l]=(0,y.useState)(null),{data:u}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),d=q({mutationFn:()=>Cd.create({name:i.trim()||`Bambuddy`,mode:o,target_printer_id:o===`proxy`?c??void 0:void 0}),onSuccess:()=>{n.invalidateQueries({queryKey:[`virtual-printers`]}),r(t(`virtualPrinter.toast.created`)),e()},onError:e=>{r(e.message||t(`virtualPrinter.toast.failedToCreate`),`error`)}});return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,onClick:e,children:(0,G.jsx)(Ld,{className:`w-full max-w-md`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(zd,{className:`p-6 space-y-4`,children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white`,children:t(`virtualPrinter.addDialog.title`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-sm text-white font-medium block mb-1`,children:t(`virtualPrinter.addDialog.name`)}),(0,G.jsx)(`input`,{type:`text`,value:i,onChange:e=>a(e.target.value),placeholder:`Bambuddy`,className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-2 text-white text-sm placeholder-bambu-gray`,autoFocus:!0})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-sm text-white font-medium block mb-1`,children:t(`virtualPrinter.mode.title`)}),(0,G.jsx)(`div`,{className:`grid grid-cols-2 gap-2`,children:[`archive`,`review`,`queue`,`proxy`].map(e=>(0,G.jsxs)(`button`,{onClick:()=>s(e),className:`p-2 rounded-lg border text-left transition-colors ${o===e?e===`proxy`?`border-blue-500 bg-blue-500/10`:`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-white text-xs font-medium`,children:[e===`proxy`&&(0,G.jsx)(Ro,{className:`w-3 h-3`}),t(`virtualPrinter.mode.${ZWe[e]}`)]}),(0,G.jsx)(`div`,{className:`text-[10px] text-bambu-gray`,children:t(`virtualPrinter.mode.${ZWe[e]}Desc`)})]},e))})]}),o===`proxy`&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`text-sm text-white font-medium block mb-1`,children:t(`virtualPrinter.targetPrinter.title`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:c??``,onChange:e=>{let t=parseInt(e.target.value,10);l(isNaN(t)?null:t)},className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-md px-3 py-2 text-white text-sm appearance-none cursor-pointer pr-10`,children:[(0,G.jsx)(`option`,{value:``,children:t(`virtualPrinter.targetPrinter.placeholder`)}),u?.map(e=>(0,G.jsxs)(`option`,{value:e.id,children:[e.name,` (`,e.ip_address,`)`]},e.id))]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:t(`virtualPrinter.addDialog.hint`)}),(0,G.jsxs)(`div`,{className:`flex gap-3 pt-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:e,className:`flex-1`,disabled:d.isPending,children:t(`common.cancel`)}),(0,G.jsx)(Q,{variant:`primary`,onClick:()=>d.mutate(),className:`flex-1`,disabled:d.isPending,children:d.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):t(`virtualPrinter.addDialog.create`)})]})]})})})}function $We(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),[r,i]=(0,y.useState)(!1),{data:a,isLoading:o}=K({queryKey:[`virtual-printers`],queryFn:Cd.list,refetchInterval:1e4}),{data:s}=K({queryKey:[`virtual-printer-settings`],queryFn:Sd.getSettings}),c=q({mutationFn:e=>Sd.updateSettings({archive_name_source:e}),onSuccess:()=>{t.invalidateQueries({queryKey:[`virtual-printer-settings`]}),n(e(`virtualPrinter.toast.updated`))},onError:t=>{n(t.message||e(`virtualPrinter.toast.failedToUpdate`),`error`)}}),l=s?.archive_name_source===`filename`,{data:u}=K({queryKey:[`vp-ca-certificate`],queryFn:Cd.getCaCertificate,staleTime:1/0}),[d,f]=(0,y.useState)(!1),p=async()=>{u&&(await KWe(u.pem)?(f(!0),n(e(`virtualPrinter.caCert.copied`)),setTimeout(()=>f(!1),2e3)):n(e(`virtualPrinter.toast.copyFailed`),`error`))},m=()=>{u&&qWe(u.pem,`bambuddy-virtual-printer-ca.crt`,`application/x-pem-file`)};if(o)return(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-8 flex justify-center`,children:(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin text-bambu-green`})})});let h=a?.printers||[],g=a?.models||{};return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-1 lg:grid-cols-3 gap-4 items-stretch`,children:[(0,G.jsx)(Ld,{className:`border-l-4 border-l-yellow-500`,children:(0,G.jsx)(zd,{className:`py-3 px-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-500 flex-shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{className:`text-xs`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`virtualPrinter.setupRequired.title`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:e(`virtualPrinter.setupRequired.description`)}),(0,G.jsxs)(`a`,{href:`https://wiki.bambuddy.cool/features/virtual-printer/`,target:`_blank`,rel:`noopener noreferrer`,className:`inline-flex items-center gap-1.5 mt-2 px-3 py-1.5 bg-yellow-100 dark:bg-yellow-500/20 border border-yellow-500/50 rounded text-yellow-700 dark:text-yellow-400 hover:bg-yellow-500/30 transition-colors text-xs`,children:[(0,G.jsx)(nc,{className:`w-3 h-3`}),e(`virtualPrinter.setupRequired.readGuide`)]})]})]})})}),(0,G.jsx)(Ld,{className:`lg:col-span-2`,children:(0,G.jsx)(zd,{className:`py-3 px-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2`,children:[(0,G.jsx)(Uc,{className:`w-4 h-4 text-blue-600 dark:text-blue-400 flex-shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium mb-1`,children:e(`virtualPrinter.howItWorks.title`)}),(0,G.jsxs)(`ul`,{className:`space-y-1 list-disc list-inside`,children:[(0,G.jsx)(`li`,{children:e(`virtualPrinter.howItWorks.step1`)}),(0,G.jsx)(`li`,{children:e(`virtualPrinter.howItWorks.step2`)}),(0,G.jsx)(`li`,{children:e(`virtualPrinter.howItWorks.step3`)})]})]})]})})})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 lg:grid-cols-2 gap-4 items-stretch`,children:[(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-3 px-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(iu,{className:`w-4 h-4 text-bambu-green flex-shrink-0 mt-1`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white font-medium`,children:e(`virtualPrinter.caCert.title`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-shrink-0`,children:[(0,G.jsxs)(`button`,{onClick:p,disabled:!u,className:`inline-flex items-center gap-1.5 px-2.5 py-1 text-xs rounded bg-bambu-dark-secondary border border-bambu-dark-tertiary text-white hover:border-bambu-gray disabled:opacity-50 transition-colors`,children:[d?(0,G.jsx)(fs,{className:`w-3.5 h-3.5 text-bambu-green`}):(0,G.jsx)(Vs,{className:`w-3.5 h-3.5`}),e(d?`virtualPrinter.caCert.copied`:`virtualPrinter.caCert.copy`)]}),(0,G.jsxs)(`button`,{onClick:m,disabled:!u,className:`inline-flex items-center gap-1.5 px-2.5 py-1 text-xs rounded bg-bambu-dark-secondary border border-bambu-dark-tertiary text-white hover:border-bambu-gray disabled:opacity-50 transition-colors`,children:[(0,G.jsx)(Ys,{className:`w-3.5 h-3.5`}),e(`virtualPrinter.caCert.download`)]})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`virtualPrinter.caCert.description`)}),u&&(0,G.jsxs)(`p`,{className:`text-[10px] text-bambu-gray font-mono mt-1 truncate`,title:u.fingerprint_sha256,children:[e(`virtualPrinter.caCert.fingerprint`),`: `,u.fingerprint_sha256]})]})]})})}),(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-3 px-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(dc,{className:`w-4 h-4 text-bambu-green flex-shrink-0 mt-1`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white font-medium`,children:e(`virtualPrinter.archiveNameSource.title`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-shrink-0`,children:[(0,G.jsx)(`span`,{className:`text-xs ${l?`text-bambu-gray`:`text-white`}`,children:e(`virtualPrinter.archiveNameSource.metadata`)}),(0,G.jsx)(hU,{checked:l,onChange:e=>c.mutate(e?`filename`:`metadata`),disabled:c.isPending}),(0,G.jsx)(`span`,{className:`text-xs ${l?`text-white`:`text-bambu-gray`}`,children:e(`virtualPrinter.archiveNameSource.filename`)})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`virtualPrinter.archiveNameSource.description`)})]})]})})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Ll,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`virtualPrinter.list.title`)}),(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[`(`,h.length,`)`]})]}),(0,G.jsxs)(Q,{variant:`primary`,onClick:()=>i(!0),children:[(0,G.jsx)(Pl,{className:`w-4 h-4 mr-1`}),e(`virtualPrinter.list.add`)]})]}),h.length===0?(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`py-8 text-center`,children:[(0,G.jsx)(Ll,{className:`w-12 h-12 text-bambu-gray mx-auto mb-3`}),(0,G.jsx)(`p`,{className:`text-bambu-gray mb-4`,children:e(`virtualPrinter.list.empty`)}),(0,G.jsxs)(Q,{variant:`primary`,onClick:()=>i(!0),children:[(0,G.jsx)(Pl,{className:`w-4 h-4 mr-1`}),e(`virtualPrinter.list.addFirst`)]})]})}):(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 xl:grid-cols-3 gap-4 items-start`,children:h.map(e=>(0,G.jsx)(XWe,{printer:e,models:g},e.id))}),r&&(0,G.jsx)(QWe,{onClose:()=>i(!1)})]})}function eGe(e){if(e<60)return`${e}s`;let t=Math.floor(e/60);if(t<60)return`${t}m`;let n=Math.floor(t/60),r=t%60;if(n<24)return r?`${n}h ${r}m`:`${n}h`;let i=Math.floor(n/24),a=n%24;return a?`${i}d ${a}h`:`${i}d`}function tGe(e){return e==null?`—`:e>=1024?`${(e/1024).toFixed(1)} GB`:`${Math.round(e)} MB`}function nGe({device:e,onUnregister:t,isDeleting:n}){let{t:r}=U(),{showToast:i}=Gd(),a=e.system_stats,o=a?.memory,s=a?.disk,c=e.online,[l,u]=(0,y.useState)(null),[d,f]=(0,y.useState)(null),p=async t=>{f(t);try{t===`update`?await Dd.triggerUpdate(e.device_id):await Dd.systemCommand(e.device_id,t),i(r(`settings.spoolbuddy.commandQueued`),`success`)}catch(e){i(e instanceof Error?e.message:r(`settings.spoolbuddy.commandError`),`error`)}finally{f(null),u(null)}},m=[{key:`update`,label:r(`settings.spoolbuddy.update`),icon:Ys},{key:`restart_browser`,label:r(`settings.spoolbuddy.restartBrowser`),icon:hl},{key:`restart_daemon`,label:r(`settings.spoolbuddy.restartDaemon`),icon:Vl},{key:`reboot`,label:r(`settings.spoolbuddy.reboot`),icon:Wl},{key:`shutdown`,label:r(`settings.spoolbuddy.shutdown`),icon:Il,variant:`danger`}],h={update:r(`settings.spoolbuddy.updateConfirmTitle`),restart_browser:r(`settings.spoolbuddy.restartBrowserConfirmTitle`),restart_daemon:r(`settings.spoolbuddy.restartDaemonConfirmTitle`),reboot:r(`settings.spoolbuddy.rebootConfirmTitle`),shutdown:r(`settings.spoolbuddy.shutdownConfirmTitle`)},g={update:r(`settings.spoolbuddy.updateConfirmBody`,{hostname:e.hostname}),restart_browser:r(`settings.spoolbuddy.restartBrowserConfirmBody`,{hostname:e.hostname}),restart_daemon:r(`settings.spoolbuddy.restartDaemonConfirmBody`,{hostname:e.hostname}),reboot:r(`settings.spoolbuddy.rebootConfirmBody`,{hostname:e.hostname}),shutdown:r(`settings.spoolbuddy.shutdownConfirmBody`,{hostname:e.hostname})};return(0,G.jsxs)(Ld,{children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-3 flex-wrap`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`h3`,{className:`text-base font-semibold text-white truncate`,children:e.hostname}),(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 px-2 py-0.5 rounded-full text-xs font-medium ${c?`bg-green-500/15 text-green-400 border border-green-500/40`:`bg-gray-500/15 text-gray-400 border border-gray-500/40`}`,children:[c?(0,G.jsx)(Zu,{className:`w-3 h-3`}):(0,G.jsx)(Xu,{className:`w-3 h-3`}),r(c?`settings.spoolbuddy.online`:`settings.spoolbuddy.offline`)]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray font-mono mt-1 truncate`,children:e.device_id})]}),(0,G.jsxs)(Q,{variant:`danger`,size:`sm`,onClick:()=>t(e),disabled:n,"aria-label":r(`settings.spoolbuddy.unregister`),children:[(0,G.jsx)(Nu,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:r(`settings.spoolbuddy.unregister`)})]})]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-2 sm:grid-cols-4 gap-3 text-xs`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-bambu-gray`,children:r(`settings.spoolbuddy.ipAddress`)}),(0,G.jsx)(`div`,{className:`text-white font-mono`,children:e.ip_address})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-bambu-gray`,children:r(`settings.spoolbuddy.firmware`)}),(0,G.jsx)(`div`,{className:`text-white`,children:e.firmware_version??`—`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`text-bambu-gray flex items-center gap-1`,children:[(0,G.jsx)(js,{className:`w-3 h-3`}),r(`settings.spoolbuddy.lastSeen`)]}),(0,G.jsx)(`div`,{className:`text-white`,children:e.last_seen?sp(e.last_seen):r(`settings.spoolbuddy.never`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-bambu-gray`,children:r(`settings.spoolbuddy.daemonUptime`)}),(0,G.jsx)(`div`,{className:`text-white`,children:eGe(e.uptime_s)})]})]}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-2`,children:m.map(({key:e,label:t,icon:n,variant:r})=>(0,G.jsxs)(Q,{variant:r??`secondary`,size:`sm`,onClick:()=>u(e),disabled:!c||d!==null,"aria-label":t,children:[d===e?(0,G.jsx)(Y,{className:`w-3.5 h-3.5 animate-spin`}):(0,G.jsx)(n,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`span`,{children:t})]},e))}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3 text-xs flex-wrap`,children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-bambu-gray`,children:[e.nfc_ok?(0,G.jsx)(Ss,{className:`w-3.5 h-3.5 text-green-400`}):(0,G.jsx)(Ds,{className:`w-3.5 h-3.5 text-red-400`}),r(`settings.spoolbuddy.nfc`),e.nfc_reader_type&&(0,G.jsxs)(`span`,{className:`text-bambu-gray/70`,children:[`(`,e.nfc_reader_type,`)`]})]}),(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-bambu-gray`,children:[e.scale_ok?(0,G.jsx)(Ss,{className:`w-3.5 h-3.5 text-green-400`}):(0,G.jsx)(Ds,{className:`w-3.5 h-3.5 text-red-400`}),r(`settings.spoolbuddy.scale`)]})]}),a&&(0,G.jsxs)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 lg:grid-cols-4 gap-3 text-xs`,children:[a.cpu_temp_c!==void 0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(ju,{className:`w-3.5 h-3.5 text-bambu-gray`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-bambu-gray`,children:r(`settings.spoolbuddy.cpuTemp`)}),(0,G.jsxs)(`div`,{className:`text-white`,children:[a.cpu_temp_c.toFixed(1),`°C`]})]})]}),a.load_avg&&a.load_avg.length>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Mo,{className:`w-3.5 h-3.5 text-bambu-gray`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-bambu-gray`,children:r(`settings.spoolbuddy.cpuLoad`)}),(0,G.jsxs)(`div`,{className:`text-white`,children:[a.load_avg[0].toFixed(2),a.cpu_count?` / ${a.cpu_count} (${Math.round(a.load_avg[0]/a.cpu_count*100)}%)`:``]})]})]}),o&&o.percent!==void 0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Hs,{className:`w-3.5 h-3.5 text-bambu-gray`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-bambu-gray`,children:r(`settings.spoolbuddy.memory`)}),(0,G.jsxs)(`div`,{className:`text-white`,children:[o.percent.toFixed(0),`% (`,tGe(o.used_mb),` / `,tGe(o.total_mb),`)`]})]})]}),s&&s.percent!==void 0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Nc,{className:`w-3.5 h-3.5 text-bambu-gray`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-bambu-gray`,children:r(`settings.spoolbuddy.disk`)}),(0,G.jsxs)(`div`,{className:`text-white`,children:[s.percent.toFixed(0),`% (`,s.used_gb?.toFixed(1),` / `,s.total_gb?.toFixed(1),` GB)`]})]})]}),a.system_uptime_s!==void 0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(js,{className:`w-3.5 h-3.5 text-bambu-gray`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-bambu-gray`,children:r(`settings.spoolbuddy.systemUptime`)}),(0,G.jsx)(`div`,{className:`text-white`,children:eGe(a.system_uptime_s)})]})]})]}),a.os&&(0,G.jsx)(`div`,{className:`mt-3 text-xs text-bambu-gray font-mono truncate`,children:[a.os.os,a.os.kernel,a.os.arch,a.os.python&&`Python ${a.os.python}`].filter(Boolean).join(` · `)})]})]}),l&&(0,G.jsx)(rf,{variant:l===`shutdown`||l===`reboot`?`danger`:`default`,title:h[l],message:g[l],confirmText:r(`settings.spoolbuddy.commandConfirm`),isLoading:d!==null,onConfirm:()=>p(l),onCancel:()=>u(null)})]})}function rGe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),[r,i]=(0,y.useState)(null),{data:a=[],isLoading:o}=K({queryKey:[`spoolbuddy-devices`],queryFn:()=>Dd.getDevices(),refetchInterval:15e3}),s=q({mutationFn:e=>Dd.deleteDevice(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`spoolbuddy-devices`]}),n(e(`settings.spoolbuddy.unregisterSuccess`),`success`),i(null)},onError:t=>{n(t.message||e(`settings.spoolbuddy.unregisterError`),`error`)}});if(o)return(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-8 flex justify-center`,children:(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin text-bambu-green`})})});let c=a.length>1;return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-3 px-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-xs`,children:[(0,G.jsx)(Uc,{className:`w-4 h-4 text-blue-400 flex-shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{className:`text-bambu-gray`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium mb-1`,children:e(`settings.spoolbuddy.infoTitle`)}),(0,G.jsx)(`p`,{children:e(`settings.spoolbuddy.infoBody`)})]})]})})}),c&&(0,G.jsx)(Ld,{className:`border-l-4 border-l-yellow-500`,children:(0,G.jsx)(zd,{className:`py-3 px-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-xs`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-500 flex-shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{className:`text-bambu-gray`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium mb-1`,children:e(`settings.spoolbuddy.duplicatesTitle`,{count:a.length})}),(0,G.jsx)(`p`,{children:e(`settings.spoolbuddy.duplicatesBody`)})]})]})})}),a.length===0?(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-8 text-center text-bambu-gray text-sm`,children:e(`settings.spoolbuddy.empty`)})}):(0,G.jsx)(`div`,{className:`space-y-3`,children:a.map(e=>(0,G.jsx)(nGe,{device:e,onUnregister:i,isDeleting:s.isPending&&s.variables===e.device_id},e.id))}),r&&(0,G.jsx)(rf,{variant:`danger`,title:e(`settings.spoolbuddy.confirmTitle`),message:e(`settings.spoolbuddy.confirmBody`,{hostname:r.hostname,deviceId:r.device_id}),confirmText:e(`settings.spoolbuddy.unregister`),isLoading:s.isPending,onConfirm:()=>s.mutate(r.device_id),onCancel:()=>i(null)})]})}function iGe(e,t,n,r,i){return n?e(`backup.restoreFromGit.${t}.${n}`,{...r??{},defaultValue:i??n}):i}var r5=[{id:`archives`,labelKey:`backup.printArchives`,icon:(0,G.jsx)(Po,{className:`w-4 h-4`})},{id:`spools`,labelKey:`backup.spoolInventory`,icon:(0,G.jsx)(Cl,{className:`w-4 h-4`})},{id:`settings`,labelKey:`backup.appSettings`,icon:(0,G.jsx)(nu,{className:`w-4 h-4`})},{id:`kprofiles`,labelKey:`backup.kProfiles`,icon:(0,G.jsx)(ju,{className:`w-4 h-4`})}],aGe=Object.fromEntries(r5.map(e=>[e.id,e.labelKey])),oGe=`HEAD`;function sGe({onClose:e}){let{t}=U(),n=co(),[r,i]=(0,y.useState)(oGe),[a,o]=(0,y.useState)({}),[s,c]=(0,y.useState)(!1),[l,u]=(0,y.useState)(!1),[d,f]=(0,y.useState)(null),p=K({queryKey:[`github-backup-commits`],queryFn:()=>Z.getGitHubBackupCommits(20)}),m=K({queryKey:[`github-restore-preview`,r],queryFn:()=>Z.getGitHubRestorePreview(r)}),h=m.data?.success?m.data.ref:r,g=(0,y.useMemo)(()=>{let e={};return m.data?.categories?.forEach(n=>{e[n.category]={available:n.available,itemCount:n.item_count,detail:iGe(t,`details`,n.detail_code,n.detail_params,n.detail)}}),e},[m.data,t]),_=(0,y.useMemo)(()=>r5.filter(e=>a[e.id]&&g[e.id]?.available).map(e=>e.id),[a,g]),v=_.length,b=!s&&_.includes(`kprofiles`),x=q({mutationFn:()=>Z.restoreFromGitHub({ref:h,categories:_,overwrite_existing:s}),onSuccess:e=>{u(!1);let t=Object.keys(e.results??{}).length>0;(e.success||t)&&(f(e),n.invalidateQueries({queryKey:[`spools`]}),n.invalidateQueries({queryKey:[`archives`]}),n.invalidateQueries({queryKey:[`settings`]})),n.invalidateQueries({queryKey:[`github-backup-logs`]}),n.invalidateQueries({queryKey:[`github-backup-status`]})},onError:()=>u(!1)}),S=x.isPending,C=!!(d&&`settings`in d.results),w=(0,y.useCallback)(()=>{if(C){window.location.reload();return}e()},[C,e]);(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&!S&&!l&&w()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[w,S,l]),(0,y.useEffect)(()=>{if(!S)return;let e=e=>{e.preventDefault(),e.returnValue=``};return window.addEventListener(`beforeunload`,e),()=>window.removeEventListener(`beforeunload`,e)},[S]),(0,y.useEffect)(()=>{m.data&&o(e=>{let t={};return r5.forEach(n=>{t[n.id]=!!e[n.id]&&!!g[n.id]?.available}),t})},[m.data,g]);let T=p.data?.commits??[],E=(e,t,n)=>{let r=(t||``).split(`
+`)[0],i=n?new Date(n).toLocaleString():``;return`${e.slice(0,7)} — ${i}${r?` — ${r}`:``}`},D=e=>e.isError?e.error?.message||t(`backup.restoreFromGit.loadFailed`):null,O=D(m)??(m.data&&!m.data.success?m.data.message:null),k=D(p)??(p.data&&!p.data.success?p.data.message:null);return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,onClick:S?void 0:w,children:(0,G.jsx)(Ld,{className:`w-full max-w-lg`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(zd,{className:`p-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-full bg-bambu-green/20 text-bambu-green`,children:(0,G.jsx)(Ul,{className:`w-5 h-5`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white`,children:t(`backup.restoreFromGit.title`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:t(`backup.restoreFromGit.subtitle`)})]})]}),(0,G.jsx)(`button`,{onClick:w,disabled:S,"aria-label":t(`common.close`),className:`p-2 hover:bg-bambu-dark-tertiary rounded-lg transition-colors disabled:opacity-50`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),d?(0,G.jsxs)(`div`,{className:`p-4 space-y-3 max-h-[400px] overflow-y-auto`,children:[(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-sm`,children:[d.success?(0,G.jsx)(Ss,{className:`w-4 h-4 text-bambu-green mt-0.5 flex-shrink-0`}):(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-500 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-white`,children:d.message})]}),!d.success&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:t(`backup.restoreFromGit.partialHint`)}),Object.entries(d.results).map(([e,n])=>(0,G.jsxs)(`div`,{className:`p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm font-medium text-white`,children:aGe[e]?t(aGe[e]):e}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:t(`backup.restoreFromGit.tally`,{restored:n.restored,skipped:n.skipped,failed:n.failed})})]}),n.notes.length>0&&(0,G.jsx)(`ul`,{className:`mt-2 space-y-1`,children:n.notes.map(e=>(0,G.jsxs)(`li`,{className:`text-xs text-bambu-gray flex items-start gap-1.5`,children:[(0,G.jsx)(Uc,{className:`w-3 h-3 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`span`,{children:iGe(t,`notes`,e.code,e.params,e.message)})]},`${e.code}:${JSON.stringify(e.params)}`))})]},e)),(0,G.jsx)(`div`,{className:`p-3 rounded-lg bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30`,children:(0,G.jsx)(`p`,{className:`text-xs text-yellow-700 dark:text-yellow-200`,children:t(`backup.restoreFromGit.reloadHint`)})})]}):(0,G.jsxs)(`div`,{className:`p-4 space-y-4 max-h-[400px] overflow-y-auto ${S?`opacity-50 pointer-events-none`:``}`,children:[x.isError&&(0,G.jsx)(`div`,{className:`p-3 rounded-lg bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30`,children:(0,G.jsx)(`p`,{className:`text-sm text-red-700 dark:text-red-400`,children:x.error?.message||t(`backup.restoreFromGit.failed`)})}),x.data&&!x.data.success&&(0,G.jsx)(`div`,{className:`p-3 rounded-lg bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30`,children:(0,G.jsx)(`p`,{className:`text-sm text-red-700 dark:text-red-400`,children:x.data.message})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`restore-commit`,className:`block text-sm font-medium text-white mb-1`,children:t(`backup.restoreFromGit.commitLabel`)}),(0,G.jsxs)(`select`,{id:`restore-commit`,value:r,onChange:e=>{i(e.target.value),x.reset()},disabled:S||p.isLoading,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`,children:[(0,G.jsx)(`option`,{value:oGe,children:t(`backup.restoreFromGit.latestCommit`)}),T.map(e=>(0,G.jsx)(`option`,{value:e.sha,children:E(e.sha,e.message,e.date)},e.sha))]}),k&&(0,G.jsx)(`p`,{className:`mt-1 text-xs text-red-500 dark:text-red-400`,children:k})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white mb-2`,children:t(`backup.restoreFromGit.categoriesLabel`)}),m.isLoading?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray p-3`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),t(`backup.restoreFromGit.inspecting`)]}):O?(0,G.jsx)(`div`,{className:`p-3 rounded-lg bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30`,children:(0,G.jsx)(`p`,{className:`text-sm text-red-700 dark:text-red-400`,children:O})}):(0,G.jsx)(`div`,{className:`space-y-2`,children:r5.map(e=>{let n=g[e.id],r=!!n?.available,i=!!a[e.id]&&r;return(0,G.jsxs)(`label`,{className:`flex items-center gap-3 p-3 rounded-lg transition-colors ${r?`cursor-pointer`:`cursor-not-allowed opacity-50`} ${i?`bg-bambu-green/10 border border-bambu-green/30`:`bg-bambu-dark hover:bg-bambu-dark-tertiary border border-transparent`}`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:i,disabled:!r||S,onChange:()=>o(t=>({...t,[e.id]:!t[e.id]})),className:`w-4 h-4 rounded border-bambu-gray bg-bambu-dark text-bambu-green focus:ring-bambu-green focus:ring-offset-0`}),(0,G.jsx)(`div`,{className:i?`text-bambu-green`:`text-bambu-gray`,children:e.icon}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsxs)(`div`,{className:`text-white text-sm font-medium`,children:[t(e.labelKey),r&&n?.itemCount?(0,G.jsx)(`span`,{className:`ml-2 text-xs text-bambu-gray`,children:t(`backup.restoreFromGit.itemCount`,{count:n.itemCount})}):null]}),n?.detail&&(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray`,children:n.detail}),e.id===`kprofiles`&&i&&b&&(0,G.jsx)(`div`,{className:`text-xs text-yellow-700 dark:text-yellow-200`,children:t(`backup.restoreFromGit.kprofilesOverwriteCaveat`)})]})]},e.id)})})]}),(0,G.jsx)(`div`,{className:`p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white`,children:t(`backup.restoreFromGit.overwriteLabel`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:t(s?`backup.restoreFromGit.overwriteOn`:`backup.restoreFromGit.overwriteOff`)})]}),(0,G.jsx)(hU,{checked:s,onChange:c,disabled:S})]})})]}),(0,G.jsx)(`div`,{className:`flex items-center justify-between p-4 border-t border-bambu-dark-tertiary`,children:d?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:w,children:t(`common.close`)}),(0,G.jsx)(Q,{onClick:()=>window.location.reload(),className:`bg-bambu-green hover:bg-bambu-green-dark`,children:t(`backup.reloadNow`)})]})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:t(`backup.restoreFromGit.selectedCount`,{count:v})}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:w,disabled:S,children:t(`common.cancel`)}),(0,G.jsx)(Q,{onClick:()=>u(!0),disabled:v===0||S,className:`bg-bambu-green hover:bg-bambu-green-dark disabled:opacity-50 disabled:cursor-not-allowed min-w-[100px]`,children:S?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 mr-2 animate-spin`}),t(`backup.restoreFromGit.restoring`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ul,{className:`w-4 h-4 mr-2`}),t(`backup.restore`)]})})]})]})})]})})}),l&&(0,G.jsx)(rf,{variant:`danger`,overlayZIndex:`z-[110]`,title:t(`backup.restoreFromGit.confirmTitle`),message:s?t(`backup.restoreFromGit.confirmMessageOverwrite`):b?`${t(`backup.restoreFromGit.confirmMessage`)} ${t(`backup.restoreFromGit.kprofilesOverwriteCaveat`)}`:t(`backup.restoreFromGit.confirmMessage`),confirmText:t(`backup.restore`),isLoading:S,loadingText:t(`backup.restoreFromGit.restoring`),onConfirm:()=>x.mutate(),onCancel:()=>u(!1)})]})}function i5(e){if(!e)return`-`;let t=ep(e);return t?t.toLocaleString():`-`}function a5({status:e}){if(!e)return null;let t={success:`bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-400`,failed:`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`,skipped:`bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`,running:`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`},n={success:(0,G.jsx)(xs,{className:`w-3 h-3`}),failed:(0,G.jsx)(Ds,{className:`w-3 h-3`}),skipped:(0,G.jsx)(uu,{className:`w-3 h-3`}),running:(0,G.jsx)(Y,{className:`w-3 h-3 animate-spin`})};return(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 px-2 py-0.5 rounded text-xs font-medium ${t[e]||`bg-gray-500/20 text-gray-400`}`,children:[n[e],e.charAt(0).toUpperCase()+e.slice(1)]})}var cGe={github:`backup.repoUrlPlaceholderGitHub`,gitea:`backup.repoUrlPlaceholderGitea`,forgejo:`backup.repoUrlPlaceholderForgejo`,gitlab:`backup.repoUrlPlaceholderGitLab`},lGe={github:`ghp_xxxxxxxxxxxx`,gitea:`your_access_token`,forgejo:`your_access_token`,gitlab:`glpat-xxxxxxxxxxxx`},uGe={github:`backup.tokenHintGitHub`,gitea:`backup.tokenHintGitea`,forgejo:`backup.tokenHintForgejo`,gitlab:`backup.tokenHintGitLab`};function dGe(e){return JSON.stringify(e)}function fGe(e,t){if(!t)return e;let n={};for(let r of Object.keys(e))e[r]!==t[r]&&(n[r]=e[r]);return n}function pGe(){let e=co(),{showToast:t}=Gd(),{t:n}=U(),{hasPermission:r}=jd(),i=r(`github:restore`),[a,o]=(0,y.useState)(``),[s,c]=(0,y.useState)(``),[l,u]=(0,y.useState)(`main`),[d,f]=(0,y.useState)(`github`),[p,m]=(0,y.useState)(!1),[h,g]=(0,y.useState)(`daily`),[_,v]=(0,y.useState)(!0),[b,x]=(0,y.useState)(!0),[S,C]=(0,y.useState)(!1),[w,T]=(0,y.useState)(!1),[E,D]=(0,y.useState)(!1),[O,k]=(0,y.useState)(!1),[A,j]=(0,y.useState)(!0),[M,N]=(0,y.useState)(!1),[P,F]=(0,y.useState)(!1),[I,L]=(0,y.useState)(``),[R,z]=(0,y.useState)(!1),[B,V]=(0,y.useState)(null),[ee,te]=(0,y.useState)(null),ne=(0,y.useRef)(null),[re,ie]=(0,y.useState)(!1),[ae,oe]=(0,y.useState)(null),[se,H]=(0,y.useState)(null),[ce,le]=(0,y.useState)(``),{data:ue,refetch:de}=K({queryKey:[`local-backup-status`],queryFn:Z.getLocalBackupStatus,refetchInterval:e=>e.state.data?.is_running?1e3:1e4}),{data:fe,refetch:pe}=K({queryKey:[`local-backup-files`],queryFn:Z.getLocalBackups,refetchInterval:3e4}),{data:me,refetch:he}=K({queryKey:[`local-backup-path-check`],queryFn:Z.checkLocalBackupPath,enabled:ue?.enabled===!0,refetchOnWindowFocus:!1});(0,y.useEffect)(()=>{ue?.path!==void 0&&le(ue.path)},[ue?.path]);let ge=q({mutationFn:Z.triggerLocalBackup,onSuccess:e=>{e.success?t(n(`backup.scheduledBackupComplete`)):t(e.message,`error`),de(),pe(),he()},onError:()=>t(n(`backup.scheduledBackupFailed`),`error`)}),_e=q({mutationFn:e=>Z.deleteLocalBackup(e),onSuccess:()=>{pe(),oe(null)}}),ve=q({mutationFn:async e=>(H(null),F(!0),te(null),L(n(`backup.restoring`)),Z.restoreLocalBackup(e)),onSuccess:e=>{F(!1),L(``),e.success?(te({success:!0,message:e.message}),t(n(`backup.backupRestoredRestart`),`success`)):(te({success:!1,message:e.message}),t(e.message,`error`))},onError:e=>{F(!1),L(``);let r=e instanceof Error?e.message:n(`backup.failedToRestore`);te({success:!1,message:r}),t(r,`error`)}});(0,y.useEffect)(()=>{if(M||P){let e=e=>(e.preventDefault(),e.returnValue=`A backup operation is in progress. Are you sure you want to leave?`,e.returnValue);return window.addEventListener(`beforeunload`,e),()=>window.removeEventListener(`beforeunload`,e)}},[M,P]);let[ye,be]=(0,y.useState)(!1),[xe,Se]=(0,y.useState)(null),[Ce,we]=(0,y.useState)(null),Te=(0,y.useRef)(null),Ee=(0,y.useRef)(null),De=(0,y.useRef)(null),Oe=(0,y.useRef)(null),ke=(0,y.useRef)(``),[Ae,je]=(0,y.useState)(!1),Me=(0,y.useMemo)(()=>({repository_url:a,branch:l,provider:d,allow_insecure_http:O,schedule_enabled:p,schedule_type:h,backup_kprofiles:_,backup_cloud_profiles:b,backup_settings:S,backup_spools:w,backup_archives:E,enabled:A}),[a,l,d,O,p,h,_,b,S,w,E,A]),Ne=(0,y.useMemo)(()=>dGe(Me),[Me]),{data:Pe,isLoading:Fe}=K({queryKey:[`github-backup-config`],queryFn:Z.getGitHubBackupConfig}),{data:Ie}=K({queryKey:[`github-backup-status`],queryFn:Z.getGitHubBackupStatus,refetchInterval:e=>e.state.data?.is_running?500:1e4}),{data:Le}=K({queryKey:[`github-backup-logs`],queryFn:()=>Z.getGitHubBackupLogs(20)}),{data:Re}=K({queryKey:[`cloud-status`],queryFn:Z.getCloudStatus}),{data:ze}=K({queryKey:[`github-backup-cloud-accounts`],queryFn:Z.getGitHubBackupCloudAccounts,staleTime:6e4}),Be=(ze?.bambu??0)+(ze?.orca??0),Ve=ze?Be>0:!!Re?.is_authenticated,{data:He}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),Ue=Co({queries:(He??[]).map(e=>({queryKey:[`printerStatus`,e.id],queryFn:()=>Z.getPrinterStatus(e.id),staleTime:1e4,refetchInterval:3e4}))}),We=(He??[]).map((e,t)=>({printer:e,connected:Ue[t]?.data?.connected??!1})),Ge=We.length,Ke=We.filter(e=>e.connected).length,qe=Ge>0&&Ke===0,Je=Ke>0&&Ke<Ge;(0,y.useEffect)(()=>(De.current&&clearTimeout(De.current),Pe?(je(!1),Oe.current={repository_url:Pe.repository_url,branch:Pe.branch,provider:Pe.provider??`github`,allow_insecure_http:Pe.allow_insecure_http??!1,schedule_enabled:Pe.schedule_enabled,schedule_type:Pe.schedule_type,backup_kprofiles:Pe.backup_kprofiles,backup_cloud_profiles:Pe.backup_cloud_profiles,backup_settings:Pe.backup_settings,backup_spools:Pe.backup_spools,backup_archives:Pe.backup_archives,enabled:Pe.enabled},o(Pe.repository_url),u(Pe.branch),f(Pe.provider??`github`),m(Pe.schedule_enabled),g(Pe.schedule_type),v(Pe.backup_kprofiles),x(Pe.backup_cloud_profiles),C(Pe.backup_settings),T(Pe.backup_spools),D(Pe.backup_archives),k(Pe.allow_insecure_http??!1),j(Pe.enabled),c(``),De.current=setTimeout(()=>{je(!0)},100)):(je(!1),Oe.current=null,c(``)),()=>{De.current&&clearTimeout(De.current)}),[Pe]);let Ye=(0,y.useCallback)(async(r=!1)=>{if(Pe)try{r&&s?(await Z.saveGitHubBackupConfig({...Me,access_token:s}),c(``),we(null),t(n(`backup.tokenUpdated`)),ke.current=``):(await Z.updateGitHubBackupConfig(fGe(Me,Oe.current)),we(null),t(n(`backup.settingsSaved`))),Oe.current=Me,e.invalidateQueries({queryKey:[`github-backup-config`]}),e.invalidateQueries({queryKey:[`github-backup-status`]})}catch(e){we(e.message)}},[Pe,s,Me,e,t,n]),Xe=(0,y.useRef)(Ye);(0,y.useEffect)(()=>{Xe.current=Ye},[Ye]),(0,y.useEffect)(()=>{if(!(!Ae||!Pe)&&!(Oe.current&&Ne===dGe(Oe.current)))return Te.current&&clearTimeout(Te.current),Te.current=setTimeout(()=>{Ye(!1)},500),()=>{Te.current&&clearTimeout(Te.current)}},[Ae,Pe,Ne,Ye]),(0,y.useEffect)(()=>{if(!(!Ae||!Pe||!s)&&s!==ke.current)return ke.current=s,Ee.current&&clearTimeout(Ee.current),Ee.current=setTimeout(()=>{Xe.current(!0)},1e3),()=>{Ee.current&&clearTimeout(Ee.current)}},[Ae,s,Pe]);let Ze=q({mutationFn:e=>Z.saveGitHubBackupConfig(e),onMutate:()=>{we(null)},onSuccess:()=>{e.invalidateQueries({queryKey:[`github-backup-config`]}),e.invalidateQueries({queryKey:[`github-backup-status`]}),t(n(`backup.githubBackupEnabled`)),c(``),je(!0)},onError:e=>{we(e.message)}}),Qe=q({mutationFn:Z.triggerGitHubBackup,onSuccess:r=>{e.invalidateQueries({queryKey:[`github-backup-status`]}),e.invalidateQueries({queryKey:[`github-backup-logs`]}),r.success?r.files_changed>0?t(n(`backup.backupCompleteFiles`,{count:r.files_changed})):t(n(`backup.backupSkippedNoChanges`)):t(n(`backup.backupFailed2`,{message:r.message}),`error`)},onError:e=>{t(n(`backup.backupFailed2`,{message:e.message}),`error`)}}),$e=q({mutationFn:()=>Z.clearGitHubBackupLogs(0),onSuccess:r=>{e.invalidateQueries({queryKey:[`github-backup-logs`]}),t(n(`backup.clearedLogs`,{count:r.deleted}))},onError:e=>{t(n(`backup.failedToClearLogs`,{message:e.message}),`error`)}}),et=async()=>{be(!0),Se(null);try{let e;if(s){if(!a){t(n(`backup.enterRepoUrl`),`error`),be(!1);return}e=await Z.testGitHubConnection(a,s,d)}else if(Pe?.has_token)e=await Z.testGitHubStoredConnection();else{t(n(`backup.enterRepoAndToken`),`error`),be(!1);return}Se({success:e.success,message:e.message,isPrivate:e.is_private})}catch(e){Se({success:!1,message:e.message,isPrivate:null})}finally{be(!1)}};return Fe?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-12`,children:(0,G.jsx)(Y,{className:`w-8 h-8 animate-spin text-bambu-green`})}):(0,G.jsxs)(`div`,{className:`grid grid-cols-1 lg:grid-cols-2 gap-6`,children:[(0,G.jsxs)(`div`,{className:`space-y-6`,children:[(0,G.jsxs)(Ld,{id:`card-backup-github`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Oc,{className:`w-5 h-5 text-gray-400`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:n(`backup.githubBackup`)})]}),Pe&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:n(`backup.enabled`)}),(0,G.jsx)(hU,{checked:A,onChange:j})]})]})}),(0,G.jsxs)(zd,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`backup.githubDescription`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`git-provider-select`,className:`block text-sm text-bambu-gray mb-1`,children:n(`backup.provider`)}),(0,G.jsxs)(`select`,{id:`git-provider-select`,value:d,onChange:e=>{f(e.target.value),Se(null),we(null)},className:`w-full h-10 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`github`,children:n(`backup.providerGitHub`)}),(0,G.jsx)(`option`,{value:`gitlab`,children:n(`backup.providerGitLab`)}),(0,G.jsx)(`option`,{value:`gitea`,children:n(`backup.providerGitea`)}),(0,G.jsx)(`option`,{value:`forgejo`,children:n(`backup.providerForgejo`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`backup.repositoryUrl`)}),(0,G.jsx)(`input`,{type:`text`,value:a,onChange:e=>{o(e.target.value),Se(null),we(null)},placeholder:n(cGe[d]),className:`w-full h-10 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsxs)(`label`,{className:`flex items-start gap-2 mt-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:O,onChange:e=>{k(e.target.checked),Se(null)},className:`w-4 h-4 mt-0.5 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:n(`backup.allowInsecureHttp`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`backup.allowInsecureHttpHint`)})]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[n(`backup.personalAccessToken`),` `,Pe?.has_token&&(0,G.jsx)(`span`,{className:`text-green-700 dark:text-green-400`,children:n(`backup.tokenSaved`)})]}),(0,G.jsx)(`input`,{type:`password`,value:s,onChange:e=>{c(e.target.value),Se(null),we(null)},placeholder:Pe?.has_token?n(`backup.enterNewToken`):lGe[d],className:`w-full h-10 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:n(uGe[d])})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`backup.branch`)}),(0,G.jsx)(`input`,{type:`text`,value:l,onChange:e=>u(e.target.value),placeholder:`main`,className:`w-full h-10 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`backup.autoBackup`)}),(0,G.jsxs)(`select`,{value:p?h:`disabled`,onChange:e=>{e.target.value===`disabled`?m(!1):(m(!0),g(e.target.value))},className:`w-full h-10 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`disabled`,children:n(`backup.manualOnly`)}),(0,G.jsx)(`option`,{value:`hourly`,children:n(`backup.hourly`)}),(0,G.jsx)(`option`,{value:`daily`,children:n(`backup.daily`)}),(0,G.jsx)(`option`,{value:`weekly`,children:n(`backup.weekly`)})]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-2`,children:n(`backup.includeInBackup`)}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`label`,{className:`flex items-start gap-2 ${qe?`cursor-not-allowed opacity-60`:`cursor-pointer`}`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:_,onChange:e=>v(e.target.checked),className:`w-4 h-4 mt-0.5 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`,disabled:qe}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-sm ${qe?`text-bambu-gray`:`text-white`}`,children:n(`backup.kProfiles`)}),qe&&(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 px-1.5 py-0.5 rounded text-xs bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`,children:[(0,G.jsx)(Iu,{className:`w-3 h-3`}),n(`backup.noPrintersConnected`)]}),Je&&(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 px-1.5 py-0.5 rounded text-xs bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`,children:[(0,G.jsx)(Iu,{className:`w-3 h-3`}),n(`backup.printersConnected`,{connected:Ke,total:Ge})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`backup.kProfilesDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-start gap-2 ${Ve?`cursor-pointer`:`cursor-not-allowed opacity-60`}`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:b,onChange:e=>x(e.target.checked),className:`w-4 h-4 mt-0.5 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`,disabled:!Ve}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-sm ${Ve?`text-white`:`text-bambu-gray`}`,children:n(`backup.cloudProfiles`)}),!Ve&&(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 px-1.5 py-0.5 rounded text-xs bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`,children:[(0,G.jsx)(Iu,{className:`w-3 h-3`}),n(`backup.cloudLoginRequiredShort`)]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`backup.cloudProfilesDescription`)}),Be>0&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:n(`backup.cloudProfilesAccounts`,{bambu:ze?.bambu??0,orca:ze?.orca??0})})]})]}),(0,G.jsxs)(`label`,{className:`flex items-start gap-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:S,onChange:e=>C(e.target.checked),className:`w-4 h-4 mt-0.5 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white text-sm`,children:n(`backup.appSettings`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`backup.appSettingsDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-start gap-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:w,onChange:e=>T(e.target.checked),className:`w-4 h-4 mt-0.5 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white text-sm`,children:n(`backup.spoolInventory`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`backup.spoolInventoryDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-start gap-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:E,onChange:e=>D(e.target.checked),className:`w-4 h-4 mt-0.5 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white text-sm`,children:n(`backup.printArchives`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`backup.printArchivesDescription`)})]})]})]})]}),(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary pt-4 space-y-3`,children:[Ie?.configured&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-sm`,children:[(0,G.jsx)(`div`,{className:`flex items-center gap-2 text-bambu-gray`,children:Ie.last_backup_at?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`span`,{children:[n(`backup.lastBackupAt`),` `,sp(Ie.last_backup_at,`system`,n)]}),(0,G.jsx)(a5,{status:Ie.last_backup_status})]}):(0,G.jsx)(`span`,{children:n(`backup.noBackupsYet`)})}),Ie.next_scheduled_run&&(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[(0,G.jsx)(js,{className:`w-3 h-3 inline mr-1`}),n(`backup.next`),` `,sp(Ie.next_scheduled_run,`system`,n)]})]}),Ce&&(0,G.jsxs)(`div`,{className:`text-sm text-red-700 dark:text-red-400 bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 rounded p-3 flex items-start gap-2`,children:[(0,G.jsx)(Ds,{className:`w-4 h-4 mt-0.5 shrink-0`}),(0,G.jsx)(`div`,{className:`flex-1 leading-relaxed whitespace-pre-wrap break-words`,children:Ce}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>we(null),className:`text-bambu-gray hover:text-white shrink-0`,"aria-label":n(`common.dismiss`,`Dismiss`),children:(0,G.jsx)(Ds,{className:`w-4 h-4`})})]}),xe&&(0,G.jsxs)(`div`,{className:`space-y-1.5`,children:[(0,G.jsxs)(`div`,{className:`text-sm flex items-center gap-1 ${xe.success?`text-green-700 dark:text-green-400`:`text-red-700 dark:text-red-400`}`,children:[xe.success?(0,G.jsx)(xs,{className:`w-4 h-4`}):(0,G.jsx)(Ds,{className:`w-4 h-4`}),xe.message]}),xe.success&&xe.isPrivate===!0&&(0,G.jsxs)(`div`,{className:`text-xs flex items-center gap-1 text-green-700 dark:text-green-400`,children:[(0,G.jsx)(xs,{className:`w-3.5 h-3.5`}),n(`backup.repoIsPrivate`,`Repository is private — safe to back up to.`)]}),xe.success&&xe.isPrivate===!1&&(0,G.jsxs)(`div`,{className:`text-xs text-red-700 dark:text-red-400 bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 rounded p-2 flex items-start gap-1.5`,children:[(0,G.jsx)(Ds,{className:`w-4 h-4 mt-0.5 shrink-0`}),(0,G.jsx)(`span`,{children:n(`backup.repoIsPublicWarning`,`Repository is PUBLIC. Bambuddy backups include MQTT credentials, Home Assistant tokens, Prometheus tokens, your Bambu Cloud email, and printer access codes via K-profiles. Saving is blocked until you make the repository private in your provider's settings.`)})]}),xe.success&&xe.isPrivate===null&&(0,G.jsxs)(`div`,{className:`text-xs text-yellow-700 dark:text-yellow-400 bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30 rounded p-2 flex items-start gap-1.5`,children:[(0,G.jsx)(Ds,{className:`w-4 h-4 mt-0.5 shrink-0`}),(0,G.jsx)(`span`,{children:n(`backup.repoVisibilityUnknown`,`Could not determine repository visibility. Bambuddy refuses to back up to anything not confirmed private; saving will be blocked.`)})]})]}),(0,G.jsx)(`div`,{className:`flex flex-wrap items-center gap-2`,children:Ie?.configured?(0,G.jsx)(G.Fragment,{children:Qe.isPending||Ie.is_running?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-green`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),(0,G.jsx)(`span`,{className:`text-sm`,children:Ie.progress||n(`backup.startingBackup`)})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(Q,{variant:`primary`,size:`sm`,onClick:()=>Qe.mutate(),disabled:!Pe?.enabled,children:[(0,G.jsx)(Ml,{className:`w-4 h-4`}),n(`backup.backupNow`)]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:et,disabled:ye,children:[ye?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Vl,{className:`w-4 h-4`}),n(`backup.test`)]}),i&&(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>ie(!0),disabled:Ie.restore_running,children:[(0,G.jsx)(Ul,{className:`w-4 h-4`}),n(`backup.restoreFromGit.button`)]})]})}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(Q,{variant:`primary`,size:`sm`,onClick:()=>{if(!a){t(n(`backup.repoRequired`),`error`);return}if(!s){t(n(`backup.tokenRequired`),`error`);return}Ze.mutate({repository_url:a,access_token:s,branch:l,provider:d,allow_insecure_http:O,schedule_enabled:p,schedule_type:h,backup_kprofiles:_,backup_cloud_profiles:b,backup_settings:S,backup_spools:w,backup_archives:E,enabled:A})},disabled:Ze.isPending||!a||!s,children:[Ze.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(xs,{className:`w-4 h-4`}),n(`backup.enableBackup`)]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:et,disabled:ye||!a||!s,children:[ye?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Vl,{className:`w-4 h-4`}),n(`backup.testConnection`)]})]})})]})]})]}),Le&&Le.length>0&&(0,G.jsxs)(Ld,{id:`card-backup-history`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Rc,{className:`w-5 h-5 text-gray-400`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:n(`backup.history`)})]}),(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:()=>$e.mutate(),disabled:$e.isPending,children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),n(`backup.clear`)]})]})}),(0,G.jsx)(zd,{children:(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`text-bambu-gray border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`th`,{className:`text-left py-2 px-2`,children:n(`backup.date`)}),(0,G.jsx)(`th`,{className:`text-left py-2 px-2`,children:n(`backup.trigger`)}),(0,G.jsx)(`th`,{className:`text-left py-2 px-2`,children:n(`backup.status`)}),(0,G.jsx)(`th`,{className:`text-left py-2 px-2`,children:n(`backup.commit`)})]})}),(0,G.jsx)(`tbody`,{children:Le.slice(0,10).map(e=>(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/50 hover:bg-bambu-dark-secondary`,children:[(0,G.jsx)(`td`,{className:`py-2 px-2 text-white`,children:i5(e.started_at)}),(0,G.jsx)(`td`,{className:`py-2 px-2 text-bambu-gray`,children:n(`backup.triggers.${e.trigger}`,{defaultValue:e.trigger})}),(0,G.jsx)(`td`,{className:`py-2 px-2`,children:(0,G.jsx)(a5,{status:e.status})}),(0,G.jsx)(`td`,{className:`py-2 px-2`,children:e.commit_sha?(0,G.jsxs)(`a`,{href:`${Pe?.repository_url}/commit/${e.commit_sha}`,target:`_blank`,rel:`noopener noreferrer`,className:`text-bambu-green hover:underline inline-flex items-center gap-1`,children:[e.commit_sha.substring(0,7),(0,G.jsx)(nc,{className:`w-3 h-3`})]}):(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`-`})})]},e.id))})]})})})]})]}),(0,G.jsxs)(`div`,{className:`space-y-6`,children:[(0,G.jsxs)(Ld,{id:`card-backup-local`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Ws,{className:`w-5 h-5 text-gray-400`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:n(`backup.localBackup`)})]})}),(0,G.jsxs)(zd,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`backup.localBackupDescription`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between py-3 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:n(`backup.downloadBackupLabel`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`backup.completeBackupZip`)})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,disabled:M||P,onClick:async()=>{N(!0),L(n(`backup.preparingBackup`));try{L(n(`backup.creatingArchive`));let{blob:e,filename:r}=await Z.exportBackup();L(n(`backup.downloadingFile`));let i=URL.createObjectURL(e),a=document.createElement(`a`);a.href=i,a.download=r,a.click(),URL.revokeObjectURL(i),t(n(`backup.backupDownloaded`))}catch(e){t(n(`backup.failedToCreateBackup`,{message:e instanceof Error?e.message:`Unknown error`}),`error`)}finally{N(!1),L(``)}},children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),n(`backup.download`)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between py-3 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:n(`backup.restoreBackup`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`backup.restoreDescription`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-light mt-1`,children:n(`backup.restoreNote`)})]}),(0,G.jsx)(`input`,{ref:ne,type:`file`,accept:`.zip`,className:`hidden`,onChange:e=>{let t=e.target.files?.[0];t&&(V(t),z(!0)),e.target.value=``}}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,disabled:P||M,onClick:()=>ne.current?.click(),children:[(0,G.jsx)(Bu,{className:`w-4 h-4`}),n(`backup.restore`)]})]}),ee&&(0,G.jsx)(`div`,{className:`p-3 rounded-lg ${ee.success?`bg-green-50 dark:bg-green-500/10 border border-green-300 dark:border-green-500/30`:`bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30`}`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-sm`,children:[ee.success?(0,G.jsx)(xs,{className:`w-4 h-4 text-green-600 dark:text-green-400 mt-0.5 flex-shrink-0`}):(0,G.jsx)(Ds,{className:`w-4 h-4 text-red-600 dark:text-red-400 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:ee.success?`text-green-800 dark:text-green-200`:`text-red-800 dark:text-red-200`,children:[ee.message,ee.success&&(0,G.jsx)(`div`,{className:`mt-2`,children:(0,G.jsxs)(Q,{size:`sm`,onClick:()=>window.location.reload(),children:[(0,G.jsx)(Ul,{className:`w-3 h-3`}),n(`backup.reloadNow`)]})})]})]})}),(0,G.jsx)(`div`,{className:`p-3 rounded-lg bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-sm`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-600 dark:text-yellow-400 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`text-yellow-800 dark:text-yellow-200`,children:[(0,G.jsx)(`span`,{className:`font-medium`,children:n(`backup.restoreReplacesAll`)}),` `,(0,G.jsx)(`span`,{className:`text-yellow-800/80 dark:text-yellow-200/70`,children:n(`backup.restoreReplacesAllDetail`)})]})]})})]})]}),(0,G.jsxs)(Ld,{id:`card-backup-scheduled`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(hc,{className:`w-5 h-5 text-gray-400`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:n(`backup.scheduledBackup`)})]}),(0,G.jsx)(hU,{checked:ue?.enabled??!1,onChange:async r=>{try{await Z.updateSettings({local_backup_enabled:r}),e.invalidateQueries({queryKey:[`settings`]}),t(n(`backup.settingsSaved`))}catch(e){t(n(`backup.failedToSave`,{message:e instanceof Error?e.message:`Unknown error`}),`error`)}de()}})]})}),(0,G.jsxs)(zd,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`backup.scheduledBackupDescription`)}),ue?.enabled&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-3 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`backup.frequency`)}),(0,G.jsxs)(`select`,{value:ue?.schedule??`daily`,className:`w-full h-10 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,onChange:async e=>{try{await Z.updateSettings({local_backup_schedule:e.target.value}),t(n(`backup.settingsSaved`))}catch(e){t(n(`backup.failedToSave`,{message:e instanceof Error?e.message:`Unknown error`}),`error`)}de()},children:[(0,G.jsx)(`option`,{value:`hourly`,children:n(`backup.hourly`)}),(0,G.jsx)(`option`,{value:`daily`,children:n(`backup.daily`)}),(0,G.jsx)(`option`,{value:`weekly`,children:n(`backup.weekly`)})]})]}),(ue?.schedule??`daily`)!==`hourly`&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`backup.backupTime`)}),(0,G.jsx)(`input`,{type:`time`,value:ue?.time??`03:00`,className:`w-full h-10 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,onChange:async e=>{try{await Z.updateSettings({local_backup_time:e.target.value}),t(n(`backup.settingsSaved`))}catch(e){t(n(`backup.failedToSave`,{message:e instanceof Error?e.message:`Unknown error`}),`error`)}de()}}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-light mt-1`,children:n(`backup.localTimeHint`,{tz:ue?.timezone||`UTC`})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`backup.retention`)}),(0,G.jsx)(`input`,{type:`number`,min:1,max:100,value:ue?.retention??5,className:`w-full h-10 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,onChange:async e=>{let r=Math.max(1,Math.min(100,parseInt(e.target.value)||5));try{await Z.updateSettings({local_backup_retention:r}),t(n(`backup.settingsSaved`))}catch(e){t(n(`backup.failedToSave`,{message:e instanceof Error?e.message:`Unknown error`}),`error`)}de()}}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-light mt-1`,children:n(`backup.retentionDescription`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:n(`backup.outputPath`)}),(0,G.jsx)(`input`,{type:`text`,value:ce,onChange:e=>le(e.target.value),className:`w-full h-10 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,onBlur:async()=>{try{await Z.updateSettings({local_backup_path:ce}),t(n(`backup.settingsSaved`))}catch(e){t(n(`backup.failedToSave`,{message:e instanceof Error?e.message:`Unknown error`}),`error`)}de(),pe(),he()},onKeyDown:e=>{e.key===`Enter`&&e.target.blur()}}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-light mt-1`,children:ce?n(`backup.outputPathDescription`):(0,G.jsxs)(G.Fragment,{children:[n(`backup.defaultPathLabel`),` `,(0,G.jsx)(`code`,{className:`text-bambu-gray`,children:ue?.default_path||`...`})]})}),me&&!me.writable&&(0,G.jsx)(`div`,{className:`mt-2 p-3 rounded-lg bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-sm`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-red-600 dark:text-red-400 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`min-w-0 text-red-800 dark:text-red-200`,children:[(0,G.jsx)(`p`,{className:`font-medium`,children:n(`backup.pathCheck.title`)}),(0,G.jsx)(`p`,{className:`mt-1 text-red-800/80 dark:text-red-200/80`,children:n(`backup.pathCheck.${me.code}`,{path:me.path,defaultValue:me.message})}),me.remedy&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`p`,{className:`mt-2 font-medium`,children:n(`backup.pathCheck.howToFix`)}),(0,G.jsx)(`pre`,{className:`mt-1 p-2 rounded bg-black/10 dark:bg-black/40 text-xs whitespace-pre-wrap break-words`,children:me.remedy})]}),me.detail&&(0,G.jsx)(`p`,{className:`mt-2 text-xs text-red-800/60 dark:text-red-200/60 break-words`,children:me.detail})]})]})}),me?.writable&&me.warning===`container_ephemeral`&&(0,G.jsx)(`div`,{className:`mt-2 p-3 rounded-lg bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-sm`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-600 dark:text-yellow-400 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`min-w-0 text-yellow-800 dark:text-yellow-200`,children:[(0,G.jsx)(`p`,{className:`font-medium`,children:n(`backup.pathCheck.ephemeralTitle`)}),(0,G.jsx)(`p`,{className:`mt-1 text-yellow-800/80 dark:text-yellow-200/80`,children:n(`backup.pathCheck.container_ephemeral`,{path:me.path})}),me.remedy&&(0,G.jsx)(`pre`,{className:`mt-1 p-2 rounded bg-black/10 dark:bg-black/40 text-xs whitespace-pre-wrap break-words`,children:me.remedy})]})]})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between py-3 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`text-sm`,children:[ue?.last_backup_at&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray`,children:[(0,G.jsxs)(`span`,{children:[n(`backup.lastBackup`),`:`]}),(0,G.jsx)(a5,{status:ue.last_status}),(0,G.jsx)(`span`,{children:sp(ue.last_backup_at)})]}),ue?.next_run&&(0,G.jsxs)(`div`,{className:`text-bambu-gray mt-1`,children:[(0,G.jsxs)(`span`,{children:[n(`backup.nextBackup`),`: `]}),(0,G.jsx)(`span`,{children:i5(ue.next_run)})]})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,disabled:ue?.is_running||ge.isPending,onClick:()=>ge.mutate(),children:[ue?.is_running||ge.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Ml,{className:`w-4 h-4`}),ue?.is_running?n(`backup.backupRunning`):n(`backup.runNow`)]})]}),fe&&fe.length>0&&(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary pt-3`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white mb-2`,children:n(`backup.backupFiles`)}),(0,G.jsx)(`div`,{className:`space-y-1`,children:fe.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between py-1.5 px-2 rounded hover:bg-bambu-dark-tertiary/50 text-sm`,children:[(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`span`,{className:`text-white truncate block`,children:e.filename}),(0,G.jsxs)(`span`,{className:`text-bambu-gray text-xs`,children:[(e.size/1024/1024).toFixed(1),` MB · `,i5(e.created_at)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 flex-shrink-0`,children:[(0,G.jsx)(`button`,{className:`text-bambu-gray hover:text-bambu-green p-1`,title:n(`backup.download`),onClick:async()=>{try{let{blob:t,filename:n}=await Z.downloadLocalBackup(e.filename),r=URL.createObjectURL(t),i=document.createElement(`a`);i.href=r,i.download=n,i.click(),URL.revokeObjectURL(r)}catch{t(n(`backup.scheduledBackupFailed`),`error`)}},children:(0,G.jsx)(Ys,{className:`w-3.5 h-3.5`})}),(0,G.jsx)(`button`,{className:`text-bambu-gray hover:text-yellow-600 dark:hover:text-yellow-400 p-1`,title:n(`backup.restore`),onClick:()=>H(e.filename),children:(0,G.jsx)(Ul,{className:`w-3.5 h-3.5`})}),(0,G.jsx)(`button`,{className:`text-bambu-gray hover:text-red-600 dark:hover:text-red-400 p-1`,onClick:()=>oe(e.filename),title:n(`backup.deleteBackup`),children:(0,G.jsx)(Nu,{className:`w-3.5 h-3.5`})})]})]},e.filename))})]}),fe&&fe.length===0&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray text-center py-3 border-t border-bambu-dark-tertiary`,children:n(`backup.noScheduledBackups`)})]})]})]})]}),re&&(0,G.jsx)(sGe,{onClose:()=>ie(!1)}),ae&&(0,G.jsx)(rf,{title:n(`backup.deleteBackup`),message:n(`backup.deleteBackupConfirm`),confirmText:n(`backup.deleteBackup`),variant:`danger`,onConfirm:()=>_e.mutate(ae),onCancel:()=>oe(null)}),se&&(0,G.jsx)(rf,{title:n(`backup.restoreConfirmTitle`),message:n(`backup.restoreConfirmMessage`,{filename:se}),confirmText:n(`backup.restoreConfirmButton`),variant:`danger`,onConfirm:()=>ve.mutate(se),onCancel:()=>H(null)}),R&&B&&(0,G.jsx)(rf,{title:n(`backup.restoreConfirmTitle`),message:n(`backup.restoreConfirmMessage`,{filename:B.name}),confirmText:n(`backup.restoreConfirmButton`),variant:`danger`,onConfirm:async()=>{z(!1),F(!0),te(null);try{L(n(`backup.uploadingFile`));let e=await Z.importBackup(B);te(e),e.success?t(n(`backup.backupRestoredRestart`),`success`):t(e.message||n(`backup.failedToRestore`),`error`)}catch(e){let r=e instanceof Error?e.message:n(`backup.failedToRestore`);te({success:!1,message:r}),t(r,`error`)}finally{F(!1),L(``),V(null)}},onCancel:()=>{z(!1),V(null)}}),(M||P)&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/80 flex items-center justify-center z-[100]`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl p-8 max-w-md w-full mx-4 text-center`,children:[(0,G.jsx)(`div`,{className:`flex justify-center mb-4`,children:(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`div`,{className:`w-16 h-16 border-4 border-bambu-dark-tertiary rounded-full`}),(0,G.jsx)(`div`,{className:`w-16 h-16 border-4 border-bambu-green border-t-transparent rounded-full absolute inset-0 animate-spin`})]})}),(0,G.jsx)(`h3`,{className:`text-xl font-semibold text-white mb-2`,children:n(M?`backup.creatingBackup`:`backup.restoringBackup`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray mb-4`,children:I||n(M?`backup.preparing`:`backup.processing`)}),(0,G.jsx)(`div`,{className:`p-3 rounded-lg bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-sm`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-600 dark:text-yellow-400 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`p`,{className:`text-yellow-800 dark:text-yellow-200 text-left`,children:n(`backup.doNotClosePage`)})]})})]})})]})}function mGe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),[r,i]=(0,y.useState)(!1),[a,o]=(0,y.useState)(``),[s,c]=(0,y.useState)(``),[l,u]=(0,y.useState)(`medium`),[d,f]=(0,y.useState)(`notify`),[p,m]=(0,y.useState)(10),[h,g]=(0,y.useState)(null),[_,v]=(0,y.useState)(null),[b,x]=(0,y.useState)(!1),{data:S}=K({queryKey:[`settings`],queryFn:Z.getSettings}),{data:C,refetch:w}=K({queryKey:[`obico-status`],queryFn:Z.getObicoStatus,refetchInterval:1e4}),{data:T}=K({queryKey:[`printers`],queryFn:Z.getPrinters});(0,y.useEffect)(()=>{if(S){i(S.obico_enabled??!1),o(S.obico_ml_url??``),c(S.obico_ml_token??``),u(S.obico_sensitivity??`medium`),f(S.obico_action??`notify`),m(S.obico_poll_interval??10);try{let e=S.obico_enabled_printers?JSON.parse(S.obico_enabled_printers):null;g(Array.isArray(e)?e:null)}catch{g(null)}x(!0)}},[S]);let E=q({mutationFn:()=>Z.updateSettings({obico_enabled:r,obico_ml_url:a,obico_ml_token:s,obico_sensitivity:l,obico_action:d,obico_poll_interval:p,obico_enabled_printers:h===null?``:JSON.stringify(h)}),onSuccess:()=>{t.invalidateQueries({queryKey:[`settings`]}),t.invalidateQueries({queryKey:[`obico-status`]}),t.invalidateQueries({queryKey:[`obico-printer-status`]}),n(e(`settings.toast.settingsSaved`))}}),D=(0,y.useMemo)(()=>!b||!S?!1:S.obico_enabled!==r||S.obico_ml_url!==a||(S.obico_ml_token??``)!==s||S.obico_sensitivity!==l||S.obico_action!==d||S.obico_poll_interval!==p||S.obico_enabled_printers!==(h===null?``:JSON.stringify(h)),[S,b,r,a,s,l,d,p,h]);(0,y.useEffect)(()=>{if(!D)return;let e=setTimeout(()=>E.mutate(),500);return()=>clearTimeout(e)},[D,r,a,s,l,d,p,h]);let O=async()=>{v(null);try{D&&await E.mutateAsync();let t=await Z.testObicoConnection(a,s);t.ok?v({ok:!0,message:t.auth_ok===null?e(`failureDetection.testSuccessTokenUnknown`):e(`failureDetection.testSuccess`)}):v({ok:!1,message:t.error||`HTTP ${t.status_code??`?`} — ${t.body??e(`failureDetection.testFailed`)}`})}catch(e){v({ok:!1,message:e instanceof Error?e.message:String(e)})}},k=(e,t)=>{if(h===null){let n=T?.map(e=>e.id)??[];g(t?n:n.filter(t=>t!==e));return}g(t?[...h,e]:h.filter(t=>t!==e))};return(0,G.jsxs)(`div`,{className:`flex flex-col lg:flex-row gap-4 lg:gap-6`,children:[(0,G.jsxs)(`div`,{className:`space-y-3 flex-1 lg:max-w-xl`,children:[(0,G.jsxs)(Ld,{id:`card-fd-ml`,children:[(0,G.jsxs)(Rd,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Jl,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`failureDetection.title`)})]}),(0,G.jsx)(hU,{checked:r,onChange:i})]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-2`,children:e(`failureDetection.description`)})]}),(0,G.jsxs)(zd,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:e(`failureDetection.mlUrl`)}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`input`,{type:`text`,value:a,onChange:e=>o(e.target.value),placeholder:`http://192.168.1.10:3333`,className:`flex-1 bg-gray-800 border border-gray-700 rounded px-3 py-2 text-white text-sm`,disabled:!r}),(0,G.jsx)(Q,{onClick:O,disabled:!a||E.isPending,variant:`secondary`,children:e(`failureDetection.test`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`failureDetection.mlUrlHint`)}),(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1 mt-3`,children:e(`failureDetection.mlToken`)}),(0,G.jsx)(`input`,{type:`password`,value:s,onChange:e=>c(e.target.value),autoComplete:`off`,placeholder:e(`failureDetection.mlTokenPlaceholder`),className:`w-full bg-gray-800 border border-gray-700 rounded px-3 py-2 text-white text-sm`,disabled:!r}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`failureDetection.mlTokenHint`)}),_&&(0,G.jsxs)(`div`,{className:`flex items-start gap-2 mt-2 text-sm ${_.ok?`text-green-700 dark:text-green-400`:`text-red-700 dark:text-red-400`}`,children:[_.ok?(0,G.jsx)(fs,{className:`w-4 h-4 mt-0.5`}):(0,G.jsx)(td,{className:`w-4 h-4 mt-0.5`}),(0,G.jsx)(`span`,{children:_.message})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:e(`failureDetection.sensitivity`)}),(0,G.jsxs)(`select`,{value:l,onChange:e=>u(e.target.value),disabled:!r,className:`w-full bg-gray-800 border border-gray-700 rounded px-3 py-2 text-white text-sm`,children:[(0,G.jsx)(`option`,{value:`low`,children:e(`failureDetection.sensitivityLow`)}),(0,G.jsx)(`option`,{value:`medium`,children:e(`failureDetection.sensitivityMedium`)}),(0,G.jsx)(`option`,{value:`high`,children:e(`failureDetection.sensitivityHigh`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`failureDetection.sensitivityHint`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:e(`failureDetection.action`)}),(0,G.jsxs)(`select`,{value:d,onChange:e=>f(e.target.value),disabled:!r,className:`w-full bg-gray-800 border border-gray-700 rounded px-3 py-2 text-white text-sm`,children:[(0,G.jsx)(`option`,{value:`notify`,children:e(`failureDetection.actionNotify`)}),(0,G.jsx)(`option`,{value:`pause`,children:e(`failureDetection.actionPause`)}),(0,G.jsx)(`option`,{value:`pause_and_off`,children:e(`failureDetection.actionPauseOff`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:e(`failureDetection.pollInterval`)}),(0,G.jsx)(`input`,{type:`number`,value:p,onChange:e=>m(Math.max(5,Math.min(120,Number(e.target.value)||10))),min:5,max:120,disabled:!r,className:`w-full bg-gray-800 border border-gray-700 rounded px-3 py-2 text-white text-sm`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`failureDetection.pollIntervalHint`)})]}),C&&!C.external_url_configured&&r&&(0,G.jsxs)(`div`,{className:`flex items-start gap-2 p-3 bg-amber-50 dark:bg-amber-900/30 border border-amber-300 dark:border-amber-700 rounded text-sm text-amber-800 dark:text-amber-200`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`font-medium`,children:e(`failureDetection.externalUrlMissing`)}),(0,G.jsx)(`div`,{className:`text-xs mt-1`,children:e(`failureDetection.externalUrlHint`)})]})]})]})]}),(0,G.jsxs)(Ld,{id:`card-fd-perprinter`,children:[(0,G.jsxs)(Rd,{children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`failureDetection.perPrinterTitle`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:e(`failureDetection.perPrinterHint`)})]}),(0,G.jsxs)(zd,{className:`space-y-2`,children:[(0,G.jsxs)(`label`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:h===null,onChange:e=>g(e.target.checked?null:T?.map(e=>e.id)??[]),disabled:!r}),(0,G.jsx)(`span`,{className:`text-white`,children:e(`failureDetection.monitorAll`)})]}),h!==null&&T&&(0,G.jsx)(`div`,{className:`pl-5 space-y-1 border-l border-gray-700`,children:T.map(e=>(0,G.jsxs)(`label`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:h.includes(e.id),onChange:t=>k(e.id,t.target.checked),disabled:!r}),(0,G.jsx)(`span`,{className:`text-white`,children:e.name})]},e.id))})]})]})]}),(0,G.jsxs)(`div`,{className:`space-y-3 flex-1 lg:max-w-xl`,children:[(0,G.jsxs)(Ld,{id:`card-fd-status`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`failureDetection.statusTitle`)})}),(0,G.jsx)(zd,{children:C?(0,G.jsxs)(`div`,{className:`space-y-3 text-sm`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:e(`failureDetection.serviceRunning`)}),(0,G.jsx)(`span`,{className:C.is_running?`text-green-700 dark:text-green-400`:`text-red-700 dark:text-red-400`,children:C.is_running?e(`common.yes`):e(`common.no`)})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:e(`failureDetection.thresholds`)}),(0,G.jsxs)(`span`,{className:`text-white font-mono`,children:[C.thresholds.low.toFixed(2),` / `,C.thresholds.high.toFixed(2)]})]}),C.last_error&&(0,G.jsxs)(`div`,{className:`flex items-start gap-2 text-red-700 dark:text-red-400`,children:[(0,G.jsx)(td,{className:`w-4 h-4 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`break-words`,children:C.last_error})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-bambu-gray mb-1`,children:e(`failureDetection.activePrinters`)}),Object.keys(C.per_printer).length===0?(0,G.jsx)(`div`,{className:`text-bambu-gray italic text-xs`,children:e(`failureDetection.noActivePrints`)}):(0,G.jsx)(`div`,{className:`space-y-1`,children:Object.entries(C.per_printer).map(([e,t])=>{let n=T?.find(t=>String(t.id)===e),r=t.class===`failure`?`text-red-700 dark:text-red-400`:t.class===`warning`?`text-amber-700 dark:text-amber-400`:`text-green-700 dark:text-green-400`;return(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-white`,children:n?.name??`Printer ${e}`}),(0,G.jsxs)(`span`,{className:`font-mono ${r}`,children:[t.class,` (`,t.score.toFixed(3),`, `,t.frame_count,`f)`]})]},e)})})]})]}):(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),(0,G.jsx)(`span`,{children:e(`common.loading`)})]})})]}),(0,G.jsxs)(Ld,{id:`card-fd-history`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`failureDetection.historyTitle`)}),(0,G.jsx)(`button`,{onClick:()=>w(),className:`text-xs text-bambu-gray hover:text-white`,children:e(`common.refresh`)})]})}),(0,G.jsx)(zd,{children:!C||C.history.length===0?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray text-sm`,children:[(0,G.jsx)(Uc,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:e(`failureDetection.noHistory`)})]}):(0,G.jsx)(`div`,{className:`space-y-1 max-h-96 overflow-y-auto text-xs font-mono`,children:C.history.map((e,t)=>{let n=T?.find(t=>t.id===e.printer_id),r=e.class===`failure`?`text-red-700 dark:text-red-400`:e.class===`warning`?`text-amber-700 dark:text-amber-400`:`text-bambu-gray`;return(0,G.jsxs)(`div`,{className:`flex justify-between gap-2 py-1 border-b border-gray-800`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:new Date(e.timestamp).toLocaleTimeString()}),(0,G.jsx)(`span`,{className:`text-white truncate`,children:n?.name??`#${e.printer_id}`}),(0,G.jsxs)(`span`,{className:r,children:[e.class,` `,e.score.toFixed(3)]})]},t)})})})]})]})]})}var hGe={starttls:587,ssl:465,none:25},gGe={587:`starttls`,465:`ssl`,25:`none`};function _Ge(){let{t:e}=U(),{showToast:t}=Gd(),n=co(),[r,i]=(0,y.useState)({smtp_host:``,smtp_port:587,smtp_username:``,smtp_password:``,smtp_security:`starttls`,smtp_auth_enabled:!0,smtp_from_email:``,smtp_from_name:`BamBuddy`}),[a,o]=(0,y.useState)(``),{data:s,isLoading:c}=K({queryKey:[`smtpSettings`],queryFn:()=>Z.getSMTPSettings()}),{authEnabled:l}=jd(),{data:u}=K({queryKey:[`advancedAuthStatus`],queryFn:()=>Z.getAdvancedAuthStatus()});(0,y.useEffect)(()=>{s&&i({...s,smtp_password:``})},[s]);let d=e=>{i({...r,smtp_security:e,smtp_port:hGe[e]})},f=e=>{let t=gGe[e];i({...r,smtp_port:e,...t?{smtp_security:t}:{}})},p=e=>{i({...r,smtp_auth_enabled:e,...e?{}:{smtp_username:``,smtp_password:``}})},m=q({mutationFn:e=>Z.saveSMTPSettings(e),onSuccess:()=>{n.invalidateQueries({queryKey:[`smtpSettings`]}),n.invalidateQueries({queryKey:[`advancedAuthStatus`]}),t(e(`settings.email.success.settingsSaved`),`success`)},onError:e=>{t(e.message,`error`)}}),h=q({mutationFn:e=>Z.testSMTP(e),onSuccess:e=>{t(e.message,e.success?`success`:`error`)},onError:e=>{t(e.message,`error`)}}),g=q({mutationFn:e=>e?Z.enableAdvancedAuth():Z.disableAdvancedAuth(),onSuccess:e=>{n.invalidateQueries({queryKey:[`advancedAuthStatus`]}),t(e.message,`success`)},onError:e=>{t(e.message,`error`)}}),_=()=>{if(!r.smtp_host||!r.smtp_from_email){t(e(`settings.email.errors.requiredFields`),`error`);return}if(r.smtp_auth_enabled&&!r.smtp_username){t(e(`settings.email.errors.usernameRequired`),`error`);return}m.mutate(r)},v=()=>{if(!a){t(e(`settings.email.errors.enterTestEmail`),`error`);return}h.mutate({test_recipient:a})},b=()=>{if(!l){t(e(`settings.email.errors.enableAuthFirst`),`error`);return}if(!u?.advanced_auth_enabled&&!u?.smtp_configured){t(e(`settings.email.errors.configureSmtpFirst`),`error`);return}g.mutate(!u?.advanced_auth_enabled)};if(c)return(0,G.jsx)(`div`,{className:`flex items-center justify-center p-12`,children:(0,G.jsx)(Y,{className:`w-8 h-8 animate-spin text-bambu-green`})});let x=u?.advanced_auth_enabled??!1,S=`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,C=`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white/40 placeholder-bambu-gray/40 cursor-not-allowed`;return(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(Ld,{id:`card-email-advanced-auth`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(il,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`settings.email.advancedAuth`)||`Advanced Authentication`})]}),(0,G.jsx)(Q,{onClick:b,disabled:g.isPending,variant:x?`danger`:`primary`,children:x?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(el,{className:`w-4 h-4`}),e(`settings.email.disable`)||`Disable`]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(tl,{className:`w-4 h-4`}),e(`settings.email.enable`)||`Enable`]})})]})}),(0,G.jsx)(zd,{children:(0,G.jsx)(`div`,{className:`space-y-3`,children:x?(0,G.jsx)(`div`,{className:`bg-green-50 dark:bg-green-500/10 border border-green-300 dark:border-green-500/30 rounded-lg p-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(xs,{className:`w-5 h-5 text-green-600 dark:text-green-400 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`settings.email.advancedAuthEnabled`)||`Advanced Authentication is enabled`}),(0,G.jsxs)(`ul`,{className:`text-sm text-green-700 dark:text-green-300 space-y-1 list-disc list-inside`,children:[(0,G.jsx)(`li`,{children:e(`settings.email.feature1`)||`Passwords are auto-generated and emailed to new users`}),(0,G.jsx)(`li`,{children:e(`settings.email.feature2`)||`Users can login with username or email`}),(0,G.jsx)(`li`,{children:e(`settings.email.feature3`)||`Forgot password feature is available`}),(0,G.jsx)(`li`,{children:e(`settings.email.feature4`)||`Admins can reset user passwords via email`})]})]})]})}):(0,G.jsx)(`div`,{className:`bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30 rounded-lg p-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(Iu,{className:`w-5 h-5 text-yellow-600 dark:text-yellow-400 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`settings.email.advancedAuthDisabled`)||`Advanced Authentication is disabled`}),(0,G.jsx)(`p`,{className:`text-sm text-yellow-700 dark:text-yellow-300`,children:e(`settings.email.advancedAuthDisabledDesc`)||`Enable advanced authentication to activate email-based features for user management.`})]})]})})})})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 lg:grid-cols-3 gap-4`,children:[(0,G.jsx)(`div`,{className:`lg:col-span-2`,children:(0,G.jsxs)(Ld,{id:`card-smtp-config`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`settings.email.smtpSettings`)||`SMTP Configuration`})}),(0,G.jsx)(zd,{children:(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:e(`settings.email.authentication`)||`Authentication`}),(0,G.jsxs)(`select`,{value:r.smtp_auth_enabled?`true`:`false`,onChange:e=>p(e.target.value===`true`),className:S,children:[(0,G.jsx)(`option`,{value:`true`,children:e(`settings.email.authOptions.enabled`)}),(0,G.jsx)(`option`,{value:`false`,children:e(`settings.email.authOptions.disabled`)})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-4 transition-opacity ${r.smtp_auth_enabled?``:`opacity-40 pointer-events-none`}`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:e(`settings.email.username`)||`Username`}),(0,G.jsx)(`input`,{type:`text`,value:r.smtp_username||``,onChange:e=>i({...r,smtp_username:e.target.value}),placeholder:`your.email@gmail.com`,disabled:!r.smtp_auth_enabled,className:r.smtp_auth_enabled?S:C})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:e(`settings.email.password`)||`Password`}),(0,G.jsx)(`input`,{type:`password`,value:r.smtp_password||``,onChange:e=>i({...r,smtp_password:e.target.value}),placeholder:s?`••••••••`:`App password`,disabled:!r.smtp_auth_enabled,className:r.smtp_auth_enabled?S:C})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:[e(`settings.email.smtpHost`)||`SMTP Server`,` *`]}),(0,G.jsx)(`input`,{type:`text`,value:r.smtp_host,onChange:e=>i({...r,smtp_host:e.target.value}),placeholder:`smtp.gmail.com`,className:S})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:e(`settings.email.smtpPort`)||`SMTP Port`}),(0,G.jsx)(`input`,{type:`number`,value:r.smtp_port,onChange:e=>f(parseInt(e.target.value)||587),placeholder:`587`,className:S})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:e(`settings.email.security`)||`Security`}),(0,G.jsxs)(`select`,{value:r.smtp_security,onChange:e=>d(e.target.value),className:S,children:[(0,G.jsx)(`option`,{value:`starttls`,children:e(`settings.email.securityOptions.starttls`)}),(0,G.jsx)(`option`,{value:`ssl`,children:e(`settings.email.securityOptions.ssl`)}),(0,G.jsx)(`option`,{value:`none`,children:e(`settings.email.securityOptions.none`)})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:[e(`settings.email.fromEmail`)||`From Email`,` *`]}),(0,G.jsx)(`input`,{type:`email`,value:r.smtp_from_email,onChange:e=>i({...r,smtp_from_email:e.target.value}),placeholder:`your@email.com`,className:S})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:e(`settings.email.fromName`)||`From Name`}),(0,G.jsx)(`input`,{type:`text`,value:r.smtp_from_name,onChange:e=>i({...r,smtp_from_name:e.target.value}),placeholder:`BamBuddy`,className:S})]})]}),(0,G.jsx)(`div`,{className:`flex gap-2`,children:(0,G.jsx)(Q,{onClick:_,disabled:m.isPending,className:`flex-1`,children:m.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),e(`settings.email.saving`)||`Saving...`]}):e(`settings.email.save`)||`Save Settings`})})]})})]})}),(0,G.jsx)(`div`,{children:(0,G.jsxs)(Ld,{id:`card-email-test`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`settings.email.testConnection`)||`Test SMTP Connection`})}),(0,G.jsx)(zd,{children:(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:e(`settings.email.testRecipient`)||`Test Recipient Email`}),(0,G.jsx)(`input`,{type:`email`,value:a,onChange:e=>o(e.target.value),placeholder:`test@example.com`,className:S})]}),(0,G.jsx)(Q,{onClick:v,disabled:h.isPending,variant:`secondary`,children:h.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),e(`settings.email.sending`)||`Sending...`]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ql,{className:`w-4 h-4`}),e(`settings.email.sendTest`)||`Send Test Email`]})})]})})]})})]})]})}var vGe={starttls:`389`,ldaps:`636`};function yGe(){let{t:e}=U(),{showToast:t}=Gd(),n=co(),{authEnabled:r}=jd(),[i,a]=(0,y.useState)({ldap_server_url:``,ldap_bind_dn:``,ldap_bind_password:``,ldap_search_base:``,ldap_user_filter:`(sAMAccountName={username})`,ldap_security:`starttls`,ldap_group_mapping:``,ldap_auto_provision:!1,ldap_default_group:``}),{data:o,isLoading:s}=K({queryKey:[`settings`],queryFn:()=>Z.getSettings()}),{data:c}=K({queryKey:[`ldapStatus`],queryFn:()=>Z.getLDAPStatus()}),{data:l=[]}=K({queryKey:[`groups`],queryFn:()=>Z.getGroups()});(0,y.useEffect)(()=>{o&&a({ldap_server_url:o.ldap_server_url||``,ldap_bind_dn:o.ldap_bind_dn||``,ldap_bind_password:``,ldap_search_base:o.ldap_search_base||``,ldap_user_filter:o.ldap_user_filter||`(sAMAccountName={username})`,ldap_security:o.ldap_security||`starttls`,ldap_group_mapping:o.ldap_group_mapping||``,ldap_auto_provision:o.ldap_auto_provision??!1,ldap_default_group:o.ldap_default_group||``})},[o]);let u=q({mutationFn:e=>Z.updateSettings(e),onSuccess:()=>{n.invalidateQueries({queryKey:[`settings`]}),n.invalidateQueries({queryKey:[`ldapStatus`]}),t(e(`settings.ldap.settingsSaved`)||`LDAP settings saved`,`success`)},onError:e=>{t(e.message,`error`)}}),d=q({mutationFn:e=>Z.updateSettings({ldap_enabled:e}),onSuccess:()=>{n.invalidateQueries({queryKey:[`settings`]}),n.invalidateQueries({queryKey:[`ldapStatus`]}),t(c?.ldap_enabled?e(`settings.ldap.disabled`)||`LDAP authentication disabled`:e(`settings.ldap.enabled`)||`LDAP authentication enabled`,`success`)},onError:e=>{t(e.message,`error`)}}),f=q({mutationFn:()=>Z.testLDAP(),onSuccess:e=>{t(e.message,e.success?`success`:`error`)},onError:e=>{t(e.message,`error`)}}),p=()=>{if(!i.ldap_server_url){t(e(`settings.ldap.errors.serverRequired`)||`LDAP server URL is required`,`error`);return}if(!i.ldap_search_base){t(e(`settings.ldap.errors.searchBaseRequired`)||`Search base DN is required`,`error`);return}let n={ldap_server_url:i.ldap_server_url,ldap_bind_dn:i.ldap_bind_dn,ldap_search_base:i.ldap_search_base,ldap_user_filter:i.ldap_user_filter,ldap_security:i.ldap_security,ldap_group_mapping:i.ldap_group_mapping,ldap_auto_provision:i.ldap_auto_provision,ldap_default_group:i.ldap_default_group};i.ldap_bind_password&&(n.ldap_bind_password=i.ldap_bind_password),u.mutate(n)},m=()=>{if(!r){t(e(`settings.ldap.errors.enableAuthFirst`)||`Enable authentication first`,`error`);return}if(!c?.ldap_enabled&&!c?.ldap_configured){t(e(`settings.ldap.errors.configureLdapFirst`)||`Save LDAP settings first`,`error`);return}d.mutate(!c?.ldap_enabled)};if(s)return(0,G.jsx)(`div`,{className:`flex items-center justify-center p-12`,children:(0,G.jsx)(Y,{className:`w-8 h-8 animate-spin text-bambu-green`})});let h=c?.ldap_enabled??!1,g=`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`;return(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(Ld,{id:`card-ldap-toggle`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(ou,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`settings.ldap.title`)||`LDAP Authentication`})]}),(0,G.jsx)(Q,{onClick:m,disabled:d.isPending,variant:h?`danger`:`primary`,children:h?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(el,{className:`w-4 h-4`}),e(`common.disable`)||`Disable`]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(tl,{className:`w-4 h-4`}),e(`common.enable`)||`Enable`]})})]})}),(0,G.jsx)(zd,{children:h?(0,G.jsx)(`div`,{className:`bg-green-50 dark:bg-green-500/10 border border-green-300 dark:border-green-500/30 rounded-lg p-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(xs,{className:`w-5 h-5 text-green-600 dark:text-green-400 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`settings.ldap.enabledDesc`)||`LDAP authentication is enabled`}),(0,G.jsxs)(`ul`,{className:`text-sm text-green-700 dark:text-green-300 space-y-1 list-disc list-inside`,children:[(0,G.jsx)(`li`,{children:e(`settings.ldap.feature1`)||`Users can login with LDAP credentials`}),(0,G.jsx)(`li`,{children:e(`settings.ldap.feature2`)||`Local admin account remains as fallback`}),(0,G.jsx)(`li`,{children:e(`settings.ldap.feature3`)||`LDAP groups are mapped to BamBuddy groups on login`})]})]})]})}):(0,G.jsx)(`div`,{className:`bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30 rounded-lg p-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(Iu,{className:`w-5 h-5 text-yellow-600 dark:text-yellow-400 mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`settings.ldap.disabledDesc`)||`LDAP authentication is disabled`}),(0,G.jsx)(`p`,{className:`text-sm text-yellow-700 dark:text-yellow-300 mt-1`,children:e(`settings.ldap.disabledHint`)||`Configure and save LDAP settings below, then enable.`})]})]})})})]}),(0,G.jsxs)(Ld,{id:`card-ldap-server`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`settings.ldap.serverConfig`)||`LDAP Server Configuration`})}),(0,G.jsx)(zd,{children:(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-3 gap-3`,children:[(0,G.jsxs)(`div`,{className:`md:col-span-2`,children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:e(`settings.ldap.serverUrl`)||`Server URL`}),(0,G.jsx)(`input`,{type:`text`,className:g,placeholder:`ldaps://ldap.example.com:636`,value:i.ldap_server_url,onChange:e=>a({...i,ldap_server_url:e.target.value})}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`settings.ldap.serverUrlHint`)||`Use ldaps:// for SSL or ldap:// with StartTLS`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:e(`settings.ldap.security`)||`Security`}),(0,G.jsx)(`div`,{className:`flex gap-2`,children:[`starttls`,`ldaps`].map(e=>(0,G.jsx)(`button`,{onClick:()=>a({...i,ldap_security:e}),className:`flex-1 px-2 py-2 rounded-lg text-sm font-medium transition-colors ${i.ldap_security===e?`bg-bambu-green text-black`:`bg-bambu-dark-secondary text-bambu-gray hover:text-white border border-bambu-dark-tertiary`}`,children:e===`starttls`?`StartTLS`:`LDAPS`},e))}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`settings.ldap.securityHint`)||`Default port: ${vGe[i.ldap_security]}`})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:e(`settings.ldap.bindDn`)||`Bind DN (Service Account)`}),(0,G.jsx)(`input`,{type:`text`,className:g,placeholder:`cn=service-account,ou=service,dc=example,dc=com`,value:i.ldap_bind_dn,onChange:e=>a({...i,ldap_bind_dn:e.target.value})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:e(`settings.ldap.bindPassword`)||`Bind Password`}),(0,G.jsx)(`input`,{type:`password`,className:g,placeholder:o?.ldap_bind_dn?`••••••••`:``,value:i.ldap_bind_password,onChange:e=>a({...i,ldap_bind_password:e.target.value})})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:e(`settings.ldap.searchBase`)||`Search Base DN`}),(0,G.jsx)(`input`,{type:`text`,className:g,placeholder:`ou=users,dc=example,dc=com`,value:i.ldap_search_base,onChange:e=>a({...i,ldap_search_base:e.target.value})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:e(`settings.ldap.userFilter`)||`User Search Filter`}),(0,G.jsx)(`input`,{type:`text`,className:g,placeholder:`(sAMAccountName={username})`,value:i.ldap_user_filter,onChange:e=>a({...i,ldap_user_filter:e.target.value})})]})]}),(0,G.jsx)(qp,{summary:(0,G.jsx)(`span`,{className:`text-sm font-medium text-bambu-gray`,children:e(`settings.ldap.advanced`)||`Advanced`}),className:`border-t border-bambu-dark-tertiary pt-3`,summaryClassName:`py-1`,children:(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white`,children:e(`settings.ldap.autoProvision`)||`Auto-provision users`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:e(`settings.ldap.autoProvisionHint`)||`Automatically create a BamBuddy account on first LDAP login`})]}),(0,G.jsx)(`button`,{onClick:()=>a({...i,ldap_auto_provision:!i.ldap_auto_provision}),className:`relative inline-flex h-6 w-11 items-center rounded-full transition-colors flex-shrink-0 ${i.ldap_auto_provision?`bg-bambu-green`:`bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(`span`,{className:`inline-block h-4 w-4 transform rounded-full bg-white transition-transform ${i.ldap_auto_provision?`translate-x-6`:`translate-x-1`}`})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:e(`settings.ldap.defaultGroup`)||`Default group`}),(0,G.jsxs)(`select`,{className:g,value:i.ldap_default_group,onChange:e=>a({...i,ldap_default_group:e.target.value}),children:[(0,G.jsx)(`option`,{value:``,children:e(`settings.ldap.defaultGroupNone`)||`— None (reject login) —`}),l.map(e=>(0,G.jsx)(`option`,{value:e.name,children:e.name},e.id))]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`settings.ldap.defaultGroupHint`)||`Fallback group assigned when an LDAP user authenticates but is not listed in any mapped group. Leave empty to leave unmapped users without permissions.`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:e(`settings.ldap.groupMapping`)||`Group Mapping (JSON)`}),(0,G.jsx)(`textarea`,{className:`${g} font-mono text-sm`,rows:4,placeholder:`{
   "CN=PrintFarm_Admins,OU=Groups,DC=example,DC=com": "Administrators",
   "CN=PrintFarm_Users,OU=Groups,DC=example,DC=com": "Operators"
-}`,value:i.ldap_group_mapping,onChange:e=>a({...i,ldap_group_mapping:e.target.value})}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:[e(`settings.ldap.groupMappingHint`)||`Map LDAP group DNs to BamBuddy groups. Available groups: `,l.map(e=>e.name).join(`, `)]})]})]})}),(0,G.jsxs)(`div`,{className:`flex gap-3 pt-2`,children:[(0,G.jsxs)(Q,{onClick:p,disabled:u.isPending,children:[u.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(xs,{className:`w-4 h-4`}),e(`common.save`)||`Save`]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>f.mutate(),disabled:f.isPending,children:[f.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Ql,{className:`w-4 h-4`}),e(`settings.ldap.testConnection`)||`Test Connection`]})]})]})})]})]})}function o5({value:e,onChange:t,placeholder:n,maxLength:r=6}){return(0,G.jsx)(`input`,{type:`text`,value:e,onChange:e=>t(e.target.value.toUpperCase().replace(/\s/g,``)),maxLength:r,className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors font-mono tracking-widest text-center`,placeholder:n,autoComplete:`one-time-code`})}function _Ge({codes:e,onDone:t}){let{t:n}=U(),[r,i]=(0,y.useState)(!1);return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`div`,{className:`bg-amber-50 dark:bg-amber-500/10 border border-amber-300 dark:border-amber-500/30 rounded-lg p-4`,children:(0,G.jsx)(`p`,{className:`text-amber-700 dark:text-amber-400 text-sm font-medium`,children:n(`settings.twoFa.backupCodesWarning`)})}),(0,G.jsx)(`div`,{className:`grid grid-cols-2 gap-2`,children:e.map((e,t)=>(0,G.jsx)(`code`,{className:`bg-bambu-dark-secondary rounded px-3 py-2 text-center font-mono text-sm text-white tracking-widest`,children:e},t))}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>{navigator.clipboard.writeText(e.join(`
-`)),i(!0),setTimeout(()=>i(!1),2e3)},className:`flex items-center gap-2`,children:[(0,G.jsx)(Vs,{className:`w-4 h-4`}),n(r?`common.copied`:`common.copy`)]}),(0,G.jsx)(Q,{variant:`primary`,size:`sm`,onClick:t,className:`flex-1`,children:n(`settings.twoFa.savedCodes`)})]})]})}function vGe({onDone:e}){let{t}=U(),n=co(),{showToast:r}=Gd(),[i,a]=(0,y.useState)(`qr`),[o,s]=(0,y.useState)(``),[c,l]=(0,y.useState)([]),[u,d]=(0,y.useState)(!1),{data:f,isLoading:p}=K({queryKey:[`totp-setup`],queryFn:()=>Z.setupTOTP(),staleTime:1/0}),m=q({mutationFn:e=>Z.enableTOTP(e),onSuccess:e=>{l(e.backup_codes),a(`backup`),n.invalidateQueries({queryKey:[`2fa-status`]})},onError:()=>r(t(`settings.twoFa.invalidCode`),`error`)});return p||!f?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-8`,children:(0,G.jsx)(Vl,{className:`w-6 h-6 animate-spin text-bambu-green`})}):i===`qr`?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray-light text-sm`,children:t(`settings.twoFa.setupInstructions`)}),(0,G.jsx)(`div`,{className:`flex justify-center`,children:(0,G.jsx)(`img`,{src:`data:image/png;base64,${f.qr_code_b64}`,alt:`TOTP QR Code`,className:`w-48 h-48 rounded-lg`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-1`,children:t(`settings.twoFa.manualEntry`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 bg-bambu-dark-secondary rounded-lg px-3 py-2`,children:[(0,G.jsx)(`code`,{className:`text-white text-xs font-mono flex-1 break-all`,children:u?f.secret:`••••••••••••••••`}),(0,G.jsx)(`button`,{onClick:()=>d(!u),className:`text-bambu-gray hover:text-white`,children:u?(0,G.jsx)(rc,{className:`w-4 h-4`}):(0,G.jsx)(ic,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>{navigator.clipboard.writeText(f.secret)},className:`text-bambu-gray hover:text-white`,children:(0,G.jsx)(Vs,{className:`w-4 h-4`})})]})]}),(0,G.jsx)(Q,{variant:`primary`,className:`w-full`,onClick:()=>a(`confirm`),children:t(`settings.twoFa.scannedContinue`)})]}):i===`confirm`?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray-light text-sm`,children:t(`settings.twoFa.enterCodeToConfirm`)}),(0,G.jsx)(o5,{value:o,onChange:s,placeholder:`000000`}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>a(`qr`),className:`flex-1`,children:t(`common.back`)}),(0,G.jsx)(Q,{variant:`primary`,className:`flex-1`,disabled:o.length!==6||m.isPending,onClick:()=>m.mutate(o),children:m.isPending?t(`common.saving`):t(`settings.twoFa.activate`)})]})]}):(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`h3`,{className:`text-white font-medium`,children:t(`settings.twoFa.backupCodesTitle`)}),(0,G.jsx)(_Ge,{codes:c,onDone:e})]})}function yGe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),{user:r}=jd(),[i,a]=(0,y.useState)(!1),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(``),[f,p]=(0,y.useState)(``),[m,h]=(0,y.useState)(null),[g,_]=(0,y.useState)(null),[v,b]=(0,y.useState)(``),[x,S]=(0,y.useState)(!1),[C,w]=(0,y.useState)(``),[T,E]=(0,y.useState)(!1),{data:D,isLoading:O}=K({queryKey:[`2fa-status`],queryFn:()=>Z.get2FAStatus()}),{data:k}=K({queryKey:[`oidc-links`],queryFn:()=>Z.getOIDCLinks()}),A=q({mutationFn:()=>Z.enableEmailOTP(),onSuccess:e=>{_(e.setup_token),n(e.message,`success`)},onError:t=>{let r=t.message??``;r.toLowerCase().includes(`smtp`)?n(e(`settings.twoFa.smtpRequired`),`error`):n(r,`error`)}}),j=q({mutationFn:()=>Z.confirmEnableEmailOTP(g,v),onSuccess:()=>{t.invalidateQueries({queryKey:[`2fa-status`]}),_(null),b(``),n(e(`settings.twoFa.emailOtpEnabled`),`success`)},onError:e=>n(e.message,`error`)}),M=q({mutationFn:e=>Z.disableEmailOTP(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`2fa-status`]}),S(!1),w(``),n(e(`settings.twoFa.emailOtpDisabled`),`success`)},onError:e=>n(e.message,`error`)}),N=q({mutationFn:e=>Z.disableTOTP(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`2fa-status`]}),s(!1),d(``),n(e(`settings.twoFa.totpDisabled`),`success`)},onError:()=>n(e(`settings.twoFa.invalidCode`),`error`)}),P=q({mutationFn:e=>Z.regenerateBackupCodes(e),onSuccess:e=>{t.invalidateQueries({queryKey:[`2fa-status`]}),l(!1),p(``),h(e.backup_codes)},onError:()=>n(e(`settings.twoFa.invalidCode`),`error`)}),F=q({mutationFn:e=>Z.deleteOIDCLink(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`oidc-links`]}),n(e(`settings.twoFa.oidcUnlinked`),`success`)},onError:e=>n(e.message,`error`)});if(O)return(0,G.jsx)(`div`,{className:`flex items-center justify-center py-12`,children:(0,G.jsx)(Vl,{className:`w-6 h-6 animate-spin text-bambu-green`})});let I=!!r?.email;return(0,G.jsxs)(`div`,{className:`space-y-6`,children:[(0,G.jsxs)(Ld,{id:`card-2fa-totp`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full flex items-center justify-center ${D?.totp_enabled?`bg-green-100 dark:bg-green-500/20`:`bg-gray-500/20`}`,children:(0,G.jsx)(pu,{className:`w-5 h-5 ${D?.totp_enabled?`text-green-600 dark:text-green-400`:`text-gray-400`}`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-white font-semibold`,children:e(`settings.twoFa.totpTitle`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm`,children:e(`settings.twoFa.totpDesc`)})]}),(0,G.jsx)(`div`,{className:`ml-auto`,children:D?.totp_enabled?(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-green-700 dark:text-green-400 text-sm font-medium`,children:[(0,G.jsx)(iu,{className:`w-4 h-4`}),` `,e(`common.enabled`)]}):(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-bambu-gray text-sm`,children:[(0,G.jsx)(au,{className:`w-4 h-4`}),` `,e(`common.disabled`)]})})]})}),(0,G.jsx)(zd,{children:i?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`h4`,{className:`text-white font-medium`,children:e(`settings.twoFa.setupAuthApp`)}),(0,G.jsx)(`button`,{onClick:()=>{a(!1),t.removeQueries({queryKey:[`totp-setup`]})},className:`text-bambu-gray hover:text-white`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(vGe,{onDone:()=>{a(!1),t.removeQueries({queryKey:[`totp-setup`]})}})]}):o?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray-light text-sm`,children:e(`settings.twoFa.disableConfirmHint`)}),(0,G.jsx)(o5,{value:u,onChange:d,placeholder:`000000 or XXXXXXXX`,maxLength:8}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{s(!1),d(``)},className:`flex-1`,children:e(`common.cancel`)}),(0,G.jsx)(Q,{variant:`danger`,className:`flex-1`,disabled:u.length<6||N.isPending,onClick:()=>N.mutate(u),children:N.isPending?e(`common.saving`):e(`settings.twoFa.disableTotp`)})]})]}):c?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray-light text-sm`,children:e(`settings.twoFa.regenBackupHint`)}),(0,G.jsx)(o5,{value:f,onChange:p,placeholder:`000000 or XXXXXXXX`,maxLength:8}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{l(!1),p(``)},className:`flex-1`,children:e(`common.cancel`)}),(0,G.jsx)(Q,{variant:`primary`,className:`flex-1`,disabled:f.length<6||P.isPending,onClick:()=>P.mutate(f),children:P.isPending?e(`common.saving`):e(`settings.twoFa.regenBackup`)})]})]}):m?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`h4`,{className:`text-white font-medium`,children:e(`settings.twoFa.newBackupCodes`)}),(0,G.jsx)(_Ge,{codes:m,onDone:()=>h(null)})]}):(0,G.jsx)(`div`,{className:`space-y-3`,children:D?.totp_enabled?(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray-light`,children:[(0,G.jsx)(Gc,{className:`w-4 h-4`}),e(`settings.twoFa.backupCodesRemaining`,{count:D.backup_codes_remaining})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>l(!0),className:`flex items-center gap-2`,children:[(0,G.jsx)(Vl,{className:`w-4 h-4`}),e(`settings.twoFa.regenBackup`)]}),(0,G.jsxs)(Q,{variant:`danger`,size:`sm`,onClick:()=>s(!0),className:`flex items-center gap-2`,children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),e(`settings.twoFa.disableTotp`)]})]}):(0,G.jsxs)(Q,{variant:`primary`,onClick:()=>a(!0),className:`flex items-center gap-2`,children:[(0,G.jsx)(pu,{className:`w-4 h-4`}),e(`settings.twoFa.setupTotp`)]})})})]}),(0,G.jsxs)(Ld,{id:`card-2fa-emailotp`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full flex items-center justify-center ${D?.email_otp_enabled?`bg-green-100 dark:bg-green-500/20`:`bg-gray-500/20`}`,children:(0,G.jsx)(il,{className:`w-5 h-5 ${D?.email_otp_enabled?`text-green-600 dark:text-green-400`:`text-gray-400`}`})}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`h3`,{className:`text-white font-semibold`,children:e(`settings.twoFa.emailOtpTitle`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm`,children:I?e(`settings.twoFa.emailOtpDesc`,{email:r?.email}):e(`settings.twoFa.emailOtpNoEmail`)})]}),(0,G.jsx)(`div`,{className:`ml-auto`,children:D?.email_otp_enabled?(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-green-700 dark:text-green-400 text-sm font-medium`,children:[(0,G.jsx)(iu,{className:`w-4 h-4`}),` `,e(`common.enabled`)]}):(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-bambu-gray text-sm`,children:[(0,G.jsx)(au,{className:`w-4 h-4`}),` `,e(`common.disabled`)]})})]})}),(0,G.jsx)(zd,{children:I?g?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray-light text-sm`,children:e(`settings.twoFa.emailSetupEnterCode`)}),(0,G.jsx)(o5,{value:v,onChange:b,placeholder:`000000`}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{_(null),b(``)},className:`flex-1`,children:e(`common.cancel`)}),(0,G.jsx)(Q,{variant:`primary`,className:`flex-1`,disabled:v.length!==6||j.isPending,onClick:()=>j.mutate(),children:j.isPending?e(`common.saving`):e(`settings.twoFa.verifyAndEnable`)})]})]}):x?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray-light text-sm`,children:e(`settings.twoFa.emailDisablePasswordHint`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`input`,{type:T?`text`:`password`,value:C,onChange:e=>w(e.target.value),placeholder:e(`settings.twoFa.passwordPlaceholder`),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>E(!T),className:`absolute right-3 top-1/2 -translate-y-1/2 text-bambu-gray hover:text-white`,children:T?(0,G.jsx)(rc,{className:`w-5 h-5`}):(0,G.jsx)(ic,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{S(!1),w(``)},className:`flex-1`,children:e(`common.cancel`)}),(0,G.jsx)(Q,{variant:`danger`,className:`flex-1`,disabled:!C||M.isPending,onClick:()=>M.mutate(C),children:M.isPending?e(`common.saving`):e(`settings.twoFa.disableEmailOtp`)})]})]}):(0,G.jsx)(`div`,{className:`flex gap-3`,children:D?.email_otp_enabled?(0,G.jsxs)(Q,{variant:`danger`,size:`sm`,onClick:()=>S(!0),className:`flex items-center gap-2`,children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),e(`settings.twoFa.disableEmailOtp`)]}):(0,G.jsxs)(Q,{variant:`primary`,disabled:!I||A.isPending,onClick:()=>A.mutate(),className:`flex items-center gap-2`,children:[(0,G.jsx)(il,{className:`w-4 h-4`}),A.isPending?e(`common.saving`):e(`settings.twoFa.enableEmailOtp`)]})}):(0,G.jsx)(`p`,{className:`text-amber-700 dark:text-amber-400 text-sm`,children:e(`settings.twoFa.addEmailFirst`)})})]}),k&&k.length>0&&(0,G.jsxs)(Ld,{id:`card-2fa-linked`,children:[(0,G.jsxs)(Rd,{children:[(0,G.jsx)(`h3`,{className:`text-white font-semibold`,children:e(`settings.twoFa.linkedAccounts`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm`,children:e(`settings.twoFa.linkedAccountsDesc`)})]}),(0,G.jsx)(zd,{children:(0,G.jsx)(`div`,{className:`space-y-3`,children:k.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between py-2 border-b border-bambu-dark-tertiary last:border-0`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white text-sm font-medium`,children:e.provider_name}),e.provider_email&&(0,G.jsx)(`p`,{className:`text-bambu-gray text-xs`,children:e.provider_email})]}),(0,G.jsx)(Q,{variant:`danger`,size:`sm`,onClick:()=>F.mutate(e.provider_id),disabled:F.isPending,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]},e.id))})})]})]})}var bGe={name:``,issuer_url:``,client_id:``,client_secret:``,scopes:`openid email profile`,is_enabled:!0,auto_create_users:!1,auto_link_existing_accounts:!1,email_claim:`email`,require_email_verified:!0,icon_url:void 0,default_group_id:null,is_autologin:!1};function xGe({initial:e,isEdit:t=!1,groups:n=[],onSave:r,onCancel:i,isPending:a}){let{t:o}=U(),[s,c]=(0,y.useState)(e),[l,u]=(0,y.useState)(!1),d=(e,t)=>c(n=>({...n,[e]:t})),f=`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors text-sm`,p=`block text-sm font-medium text-white mb-1`,m=()=>{let e={...s};t&&!l&&delete e.client_secret,r(e)},h=s.auto_link_existing_accounts===!0,g=s.require_email_verified??!0,_;return _=h?o(`settings.oidc.form.requireEmailVerifiedAutoLink`):g?o(`settings.oidc.form.requireEmailVerifiedDesc`):(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:o(`settings.oidc.form.requireEmailVerifiedWarning`)}),(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:p,children:[o(`settings.oidc.form.name`),` `,(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:`*`})]}),(0,G.jsx)(`input`,{className:f,value:s.name,onChange:e=>d(`name`,e.target.value),placeholder:`Google`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:p,children:[o(`settings.oidc.form.issuerUrl`),` `,(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:`*`})]}),(0,G.jsx)(`input`,{className:f,value:s.issuer_url,onChange:e=>d(`issuer_url`,e.target.value),placeholder:`https://accounts.google.com`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:p,children:[o(`settings.oidc.form.clientId`),` `,(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:`*`})]}),(0,G.jsx)(`input`,{className:f,value:s.client_id,onChange:e=>d(`client_id`,e.target.value),placeholder:`your-client-id`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:p,children:[o(`settings.oidc.form.clientSecret`),!t&&(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:` *`}),t&&(0,G.jsxs)(`span`,{className:`text-bambu-gray text-xs ml-1`,children:[`(`,o(`settings.oidc.form.secretHint`),`)`]})]}),(0,G.jsx)(`input`,{className:f,type:`password`,value:l?s.client_secret:``,placeholder:t&&!l?`••••••••`:o(`settings.oidc.form.secretPlaceholder`),onChange:e=>{u(!0),d(`client_secret`,e.target.value)}})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p,children:o(`settings.oidc.form.scopes`)}),(0,G.jsx)(`input`,{className:f,value:s.scopes,onChange:e=>d(`scopes`,e.target.value),placeholder:`openid email profile`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p,children:o(`settings.oidc.form.iconUrl`)}),(0,G.jsx)(`input`,{className:f,value:s.icon_url??``,onChange:e=>d(`icon_url`,e.target.value===``?null:e.target.value),placeholder:`https://...`})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-6 pt-2`,children:[(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(hU,{checked:s.is_enabled??!0,onChange:e=>d(`is_enabled`,e)}),(0,G.jsx)(`span`,{className:`text-white text-sm`,children:o(`settings.oidc.form.enabled`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(hU,{checked:s.auto_create_users??!1,onChange:e=>d(`auto_create_users`,e)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white text-sm`,children:o(`settings.oidc.form.autoCreate`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-xs`,children:o(`settings.oidc.form.autoCreateDesc`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer w-full`,children:[(0,G.jsx)(hU,{checked:s.auto_link_existing_accounts??!1,onChange:e=>d(`auto_link_existing_accounts`,e)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white text-sm`,children:o(`settings.oidc.form.autoLink`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-xs`,children:o(`settings.oidc.form.autoLinkDesc`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer w-full`,children:[(0,G.jsx)(hU,{checked:g,onChange:e=>d(`require_email_verified`,e),disabled:h}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white text-sm`,children:o(`settings.oidc.form.requireEmailVerified`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-xs`,children:_})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer w-full`,children:[(0,G.jsx)(hU,{checked:s.is_autologin??!1,onChange:e=>d(`is_autologin`,e)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white text-sm`,children:o(`settings.oidc.form.autologin`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-xs`,children:o(`settings.oidc.form.autologinDesc`)})]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p,children:o(`settings.oidc.form.emailClaim`)}),(0,G.jsx)(`input`,{className:f,value:s.email_claim,onChange:e=>d(`email_claim`,e.target.value||`email`),placeholder:o(`settings.oidc.form.emailClaimPlaceholder`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-xs mt-1`,children:o(`settings.oidc.form.emailClaimDesc`)}),h&&s.email_claim!==`email`&&(0,G.jsx)(`p`,{className:`text-yellow-700 dark:text-yellow-400 text-xs mt-1`,children:o(`settings.oidc.form.emailClaimCustomClaimAutoLinkWarning`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p,children:o(`settings.oidc.form.defaultGroup`)}),(0,G.jsxs)(`select`,{className:f,value:s.default_group_id??``,onChange:e=>d(`default_group_id`,e.target.value?Number(e.target.value):null),children:[(0,G.jsx)(`option`,{value:``,children:o(`settings.oidc.form.defaultGroupViewersFallback`)}),n.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-xs mt-1`,children:o(`settings.oidc.form.defaultGroupDesc`)})]}),(0,G.jsxs)(`div`,{className:`flex gap-3 pt-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:i,className:`flex-1`,children:o(`common.cancel`)}),(0,G.jsx)(Q,{variant:`primary`,className:`flex-1`,disabled:!s.name||!s.issuer_url||!s.client_id||!t&&!s.client_secret||t&&l&&!s.client_secret||a,onClick:m,children:o(a?`common.saving`:`common.save`)})]})]})}function SGe({provider:e}){let[t,n]=(0,y.useState)(!1);return e.has_icon&&!t?(0,G.jsx)(`img`,{src:Z.oidcProviderIconUrl(e.id),alt:e.name,className:`w-8 h-8 rounded object-contain`,onError:()=>n(!0)}):(0,G.jsx)(`div`,{className:`w-8 h-8 rounded-full bg-bambu-dark-tertiary flex items-center justify-center`,children:(0,G.jsx)(kc,{className:`w-4 h-4 text-bambu-gray`})})}function CGe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),[r,i]=(0,y.useState)(!1),[a,o]=(0,y.useState)(null),[s,c]=(0,y.useState)(null),{data:l,isLoading:u}=K({queryKey:[`oidc-providers-all`],queryFn:()=>Z.getOIDCProvidersAll()}),{data:d=[]}=K({queryKey:[`groups`],queryFn:()=>Z.getGroups()}),f=q({mutationFn:e=>Z.createOIDCProvider(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`oidc-providers-all`]}),i(!1),n(e(`settings.oidc.created`),`success`)},onError:e=>n(e.message,`error`)}),p=q({mutationFn:({id:e,data:t})=>Z.updateOIDCProvider(e,t),onSuccess:()=>{t.invalidateQueries({queryKey:[`oidc-providers-all`]}),o(null),n(e(`settings.oidc.updated`),`success`)},onError:e=>n(e.message,`error`)}),m=q({mutationFn:e=>Z.deleteOIDCProvider(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`oidc-providers-all`]}),c(null),n(e(`settings.oidc.deleted`),`success`)},onError:e=>n(e.message,`error`)}),h=q({mutationFn:e=>Z.refreshOIDCProviderIcon(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`oidc-providers-all`]}),t.invalidateQueries({queryKey:[`oidc-providers`]}),n(e(`settings.oidc.iconRefreshed`),`success`)},onError:t=>n(t.message||e(`settings.oidc.iconFetchFailed`),`error`)}),g=q({mutationFn:e=>Z.deleteOIDCProviderIcon(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`oidc-providers-all`]}),t.invalidateQueries({queryKey:[`oidc-providers`]}),n(e(`settings.oidc.iconRemoved`),`success`)},onError:e=>n(e.message,`error`)}),_=e=>p.mutate({id:e.id,data:{is_enabled:!e.is_enabled}});return u?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-12`,children:(0,G.jsx)(Vl,{className:`w-6 h-6 animate-spin text-bambu-green`})}):(0,G.jsxs)(`div`,{className:`space-y-6`,children:[(0,G.jsxs)(Ld,{id:`card-oidc`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-white font-semibold`,children:e(`settings.oidc.title`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm`,children:e(`settings.oidc.desc`)})]}),!r&&(0,G.jsxs)(Q,{variant:`primary`,size:`sm`,onClick:()=>i(!0),className:`flex items-center gap-2`,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),e(`settings.oidc.addProvider`)]})]})}),r&&(0,G.jsx)(zd,{children:(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary pt-4`,children:[(0,G.jsx)(`h4`,{className:`text-white font-medium mb-4`,children:e(`settings.oidc.newProvider`)}),(0,G.jsx)(xGe,{initial:bGe,groups:d,onSave:e=>f.mutate(e),onCancel:()=>i(!1),isPending:f.isPending})]})})]}),l&&l.length===0&&!r&&(0,G.jsx)(Ld,{id:`card-oidc-empty`,children:(0,G.jsx)(zd,{children:(0,G.jsxs)(`div`,{className:`text-center py-8 space-y-3`,children:[(0,G.jsx)(kc,{className:`w-12 h-12 text-bambu-gray mx-auto`}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`settings.oidc.empty`)}),(0,G.jsxs)(Q,{variant:`primary`,size:`sm`,onClick:()=>i(!0),className:`inline-flex items-center gap-2`,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),e(`settings.oidc.addProvider`)]})]})})}),l?.map(t=>(0,G.jsxs)(Ld,{children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(SGe,{provider:t}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`h4`,{className:`text-white font-medium`,children:t.name}),t.is_enabled?(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-xs text-green-700 dark:text-green-400 bg-green-50 dark:bg-green-400/10 px-2 py-0.5 rounded-full`,children:[(0,G.jsx)(fs,{className:`w-3 h-3`}),` `,e(`common.enabled`)]}):(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-xs text-bambu-gray bg-bambu-dark-tertiary px-2 py-0.5 rounded-full`,children:[(0,G.jsx)(td,{className:`w-3 h-3`}),` `,e(`common.disabled`)]}),t.is_env_managed&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-xs text-bambu-green`,children:[(0,G.jsx)(tl,{className:`w-3 h-3`}),` `,e(`settings.environmentManagedLabel`)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 text-bambu-gray text-xs mt-0.5`,children:[(0,G.jsx)(nc,{className:`w-3 h-3`}),(0,G.jsx)(`span`,{children:t.issuer_url})]})]}),(0,G.jsx)(`div`,{className:`flex items-center gap-2`,children:!t.is_env_managed&&(0,G.jsxs)(G.Fragment,{children:[t.icon_url&&(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>h.mutate(t.id),disabled:h.isPending,title:e(`settings.oidc.refreshIcon`),"data-testid":`refresh-icon-${t.id}`,children:(0,G.jsx)(Vl,{className:`w-4 h-4 ${h.isPending?`animate-spin`:``}`})}),t.has_icon&&(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>g.mutate(t.id),disabled:g.isPending,title:e(`settings.oidc.removeIcon`),"data-testid":`remove-icon-${t.id}`,children:(0,G.jsx)(Bc,{className:`w-4 h-4`})}),(0,G.jsx)(hU,{checked:t.is_enabled,onChange:()=>_(t),disabled:p.isPending}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>o(a===t.id?null:t.id),"data-testid":`edit-provider-${t.id}`,children:(0,G.jsx)(Ol,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`danger`,size:`sm`,onClick:()=>c(t),"data-testid":`delete-provider-${t.id}`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})})]})}),a===t.id&&(0,G.jsx)(zd,{children:(0,G.jsx)(`div`,{className:`border-t border-bambu-dark-tertiary pt-4`,children:(0,G.jsx)(xGe,{isEdit:!0,groups:d,initial:{name:t.name,issuer_url:t.issuer_url,client_id:t.client_id,client_secret:``,scopes:t.scopes,is_enabled:t.is_enabled,auto_create_users:t.auto_create_users,auto_link_existing_accounts:t.auto_link_existing_accounts,email_claim:t.email_claim,require_email_verified:t.require_email_verified,icon_url:t.icon_url??void 0,default_group_id:t.default_group_id??null,is_autologin:t.is_autologin},onSave:e=>p.mutate({id:t.id,data:e}),onCancel:()=>o(null),isPending:p.isPending})})}),a!==t.id&&(0,G.jsx)(zd,{children:(0,G.jsxs)(`dl`,{className:`grid grid-cols-2 sm:grid-cols-3 gap-x-6 gap-y-2 text-sm`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`dt`,{className:`text-bambu-gray`,children:e(`settings.oidc.form.clientId`)}),(0,G.jsx)(`dd`,{className:`text-white font-mono truncate`,children:t.client_id})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`dt`,{className:`text-bambu-gray`,children:e(`settings.oidc.form.scopes`)}),(0,G.jsx)(`dd`,{className:`text-white`,children:t.scopes})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`dt`,{className:`text-bambu-gray`,children:e(`settings.oidc.form.autoCreate`)}),(0,G.jsx)(`dd`,{className:t.auto_create_users?`text-green-700 dark:text-green-400`:`text-bambu-gray`,children:t.auto_create_users?e(`common.yes`):e(`common.no`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`dt`,{className:`text-bambu-gray`,children:e(`settings.oidc.form.autoLink`)}),(0,G.jsx)(`dd`,{className:t.auto_link_existing_accounts?`text-green-700 dark:text-green-400`:`text-bambu-gray`,children:t.auto_link_existing_accounts?e(`common.yes`):e(`common.no`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`dt`,{className:`text-bambu-gray`,children:e(`settings.oidc.form.emailClaim`)}),(0,G.jsx)(`dd`,{className:`text-white font-mono`,children:t.email_claim})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`dt`,{className:`text-bambu-gray`,children:e(`settings.oidc.form.requireEmailVerified`)}),(0,G.jsx)(`dd`,{className:t.require_email_verified?`text-green-700 dark:text-green-400`:`text-red-700 dark:text-red-400`,children:t.require_email_verified?e(`common.yes`):e(`common.no`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`dt`,{className:`text-bambu-gray`,children:e(`settings.oidc.form.defaultGroup`)}),(0,G.jsx)(`dd`,{className:`text-white`,children:t.default_group_id?d.find(e=>e.id===t.default_group_id)?.name??e(`settings.oidc.form.defaultGroupViewersFallback`):e(`settings.oidc.form.defaultGroupViewersFallback`)})]})]})})]},t.id)),s&&(0,G.jsx)(rf,{title:e(`settings.oidc.deleteTitle`),message:e(`settings.oidc.deleteMessage`,{name:s.name}),confirmText:e(`common.delete`),variant:`danger`,onConfirm:()=>m.mutate(s.id),onCancel:()=>c(null)})]})}var wGe=new Map;function s5(e){wGe.set(e.anchor,e)}function TGe(){return Array.from(wGe.values())}s5({labelKey:`settings.encryption.title`,labelFallback:`MFA Encryption Status`,tab:`users`,subTab:`security`,keywords:`mfa encryption status security backup totp oidc fernet`,anchor:`card-mfa-encryption`});function EGe(){let{t:e}=U(),{data:t,isLoading:n,isError:r,refetch:i}=K({queryKey:[`encryptionStatus`],queryFn:()=>Z.getEncryptionStatus(),refetchInterval:e=>{if(!e.state.error)return 3e4;let t=e.state.fetchFailureCount??0;return t<=3?Math.min(5e3*Math.max(1,t),3e4):!1}});if(n)return(0,G.jsxs)(Ld,{id:`card-mfa-encryption`,"data-testid":`encryption-status-card`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(ou,{className:`text-bambu-gray`,size:20}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold`,children:e(`settings.encryption.title`)})]})}),(0,G.jsx)(zd,{children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray`,"data-testid":`encryption-loading`,children:[(0,G.jsx)(Y,{className:`animate-spin`,size:16}),(0,G.jsx)(`span`,{children:e(`common.loading`)})]})})]});if(r||!t)return(0,G.jsxs)(Ld,{id:`card-mfa-encryption`,"data-testid":`encryption-status-card`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(ou,{className:`text-bambu-gray`,size:20}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold`,children:e(`settings.encryption.title`)})]})}),(0,G.jsxs)(zd,{children:[(0,G.jsx)(`div`,{className:`text-red-700 dark:text-red-400`,"data-testid":`encryption-error`,children:e(`common.errorLoading`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>i(),className:`mt-2 text-sm text-blue-700 dark:text-blue-400 underline hover:text-blue-800 dark:hover:text-blue-300`,"data-testid":`encryption-retry-button`,children:e(`common.retry`)})]})]});let a=t.legacy_plaintext_rows.oidc_providers+t.legacy_plaintext_rows.user_totp,o=t.encrypted_rows.oidc_providers+t.encrypted_rows.user_totp,s,c,l,u;t.decryption_broken?(s=`bg-red-100 dark:bg-red-500/20 border-red-400 dark:border-red-500/50 text-red-700 dark:text-red-400`,c=(0,G.jsx)(Ds,{className:`text-red-600 dark:text-red-400`,size:20}),l=e(`settings.encryption.decryptionBrokenTitle`),u=e(`settings.encryption.decryptionBrokenError`,{count:o})):t.key_source===`generated`?(s=`bg-amber-50 dark:bg-amber-500/10 border-amber-300 dark:border-amber-500/30 text-amber-700 dark:text-amber-400`,c=(0,G.jsx)(iu,{className:`text-amber-600 dark:text-amber-400`,size:20}),l=e(`settings.encryption.enabledGenerated`),u=e(`settings.encryption.backupHint`)):a>0?(s=`bg-amber-50 dark:bg-amber-500/10 border-amber-300 dark:border-amber-500/30 text-amber-700 dark:text-amber-400`,c=(0,G.jsx)(Iu,{className:`text-amber-600 dark:text-amber-400`,size:20}),l=t.key_source===`env`?e(`settings.encryption.enabledFromEnv`):e(`settings.encryption.enabledFromFile`),u=e(`settings.encryption.legacyRowsWarning`,{count:a})):t.key_configured?(s=`bg-green-100 dark:bg-green-500/20 border-green-300 dark:border-green-500/30 text-green-700 dark:text-green-400`,c=(0,G.jsx)(iu,{className:`text-green-600 dark:text-green-400`,size:20}),l=t.key_source===`env`?e(`settings.encryption.enabledFromEnv`):e(`settings.encryption.enabledFromFile`),u=e(`settings.encryption.allEncrypted`)):(s=`bg-gray-500/20 border-gray-500/30 text-gray-400`,c=(0,G.jsx)(au,{className:`text-gray-400`,size:20}),l=e(`settings.encryption.notConfigured`),u=e(`settings.encryption.notConfiguredDesc`));let d=t.key_source===`generated`&&a>0;return(0,G.jsxs)(Ld,{id:`card-mfa-encryption`,"data-testid":`encryption-status-card`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[c,(0,G.jsx)(`h2`,{className:`text-lg font-semibold`,children:e(`settings.encryption.title`)})]})}),(0,G.jsxs)(zd,{children:[(0,G.jsxs)(`div`,{className:`p-3 border rounded-lg ${s}`,"data-testid":`encryption-status`,children:[(0,G.jsx)(`p`,{className:`font-medium mb-1`,children:l}),(0,G.jsx)(`p`,{className:`text-sm`,children:u})]}),d&&(0,G.jsx)(`div`,{className:`mt-2 p-3 border rounded-lg bg-amber-50 dark:bg-amber-500/10 border-amber-300 dark:border-amber-500/30 text-amber-700 dark:text-amber-400`,"data-testid":`encryption-legacy-warning`,children:(0,G.jsx)(`p`,{className:`text-sm`,children:e(`settings.encryption.legacyRowsWarning`,{count:a})})}),t.migration_error_count>0&&(0,G.jsx)(`div`,{className:`mt-2 p-3 border rounded-lg bg-amber-50 dark:bg-amber-500/10 border-amber-300 dark:border-amber-500/30 text-amber-700 dark:text-amber-400`,"data-testid":`encryption-migration-warning`,children:(0,G.jsx)(`p`,{className:`text-sm`,children:e(`settings.encryption.migrationErrorWarning`,{count:t.migration_error_count})})}),(0,G.jsxs)(`div`,{className:`mt-4 grid grid-cols-2 gap-4 text-sm`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`settings.encryption.encryptedRowsLabel`)}),(0,G.jsxs)(`p`,{className:`font-medium`,children:[`OIDC: `,t.encrypted_rows.oidc_providers,` · TOTP: `,t.encrypted_rows.user_totp]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`settings.encryption.legacyRowsLabel`)}),(0,G.jsxs)(`p`,{className:`font-medium`,children:[`OIDC: `,t.legacy_plaintext_rows.oidc_providers,` · TOTP: `,t.legacy_plaintext_rows.user_totp]})]})]})]})]})}var DGe={get:`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400 border-blue-300 dark:border-blue-500/30`,post:`bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-400 border-green-300 dark:border-green-500/30`,put:`bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400 border-yellow-300 dark:border-yellow-500/30`,patch:`bg-orange-100 dark:bg-orange-500/20 text-orange-700 dark:text-orange-400 border-orange-300 dark:border-orange-500/30`,delete:`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400 border-red-300 dark:border-red-500/30`};function OGe(e,t){let n=t.replace(`#/`,``).split(`/`),r=e;for(let e of n)r=r[e];return r}function c5(e,t,n=0){if(n>5)return`...`;if(t.$ref)return c5(e,OGe(e,t.$ref),n+1);if(t.allOf){let r={};for(let i of t.allOf){let t=c5(e,i,n+1);typeof t==`object`&&t&&Object.assign(r,t)}return r}if(t.example!==void 0)return t.example;if(t.default!==void 0)return t.default;switch(t.type){case`string`:return t.enum?t.enum[0]:`string`;case`integer`:case`number`:return 0;case`boolean`:return!1;case`array`:return t.items?[c5(e,t.items,n+1)]:[];case`object`:if(t.properties){let r={};for(let[i,a]of Object.entries(t.properties))r[i]=c5(e,a,n+1);return r}return{};default:return null}}function kGe({path:e,method:t,spec:n,schema:r,apiKey:i}){let[a,o]=(0,y.useState)(!1),[s,c]=(0,y.useState)({}),[l,u]=(0,y.useState)(``),[d,f]=(0,y.useState)(null),[p,m]=(0,y.useState)(!1),[h,g]=(0,y.useState)(!1);(0,y.useEffect)(()=>{if(a&&n.parameters){let e={};for(let t of n.parameters)t.schema?.default!==void 0&&(e[t.name]=String(t.schema.default));c(t=>({...e,...t}))}},[a,n.parameters]),(0,y.useEffect)(()=>{if(a&&n.requestBody?.content?.[`application/json`]?.schema&&!l){let e=n.requestBody.content[`application/json`].schema,t=c5(r,e);u(JSON.stringify(t,null,2))}},[a,n.requestBody,r,l]);let _=(()=>{let e=[];for(let t of n.parameters||[])if(t.in===`path`||t.required){let n=s[t.name];(n===void 0||n===``)&&e.push(t.name)}return e})(),v=async()=>{if(_.length>0){f({status:0,statusText:`Validation Error`,headers:{},body:`Missing required parameters: ${_.join(`, `)}`,duration:0});return}m(!0),f(null);try{let r=e,a=new URLSearchParams;for(let e of n.parameters||[]){let t=s[e.name];t!==void 0&&t!==``&&(e.in===`path`?r=r.replace(`{${e.name}}`,encodeURIComponent(t)):e.in===`query`&&a.append(e.name,t))}let o=a.toString(),c=`${r}${o?`?${o}`:``}`,u={"Content-Type":`application/json`};i&&(u[`X-API-Key`]=i);let d={method:t.toUpperCase(),headers:u};[`post`,`put`,`patch`].includes(t)&&l&&(d.body=l);let p=performance.now(),m=await fetch(c,d),h=Math.round(performance.now()-p),g={};m.headers.forEach((e,t)=>{g[t]=e});let _;_=m.headers.get(`content-type`)?.includes(`application/json`)?await m.json():await m.text(),f({status:m.status,statusText:m.statusText,headers:g,body:_,duration:h})}catch(e){f({status:0,statusText:`Network Error`,headers:{},body:e instanceof Error?e.message:`Unknown error`,duration:0})}finally{m(!1)}},b=async()=>{if(d){let e=typeof d.body==`string`?d.body:JSON.stringify(d.body,null,2);try{await navigator.clipboard.writeText(e),g(!0),setTimeout(()=>g(!1),2e3)}catch{let t=document.createElement(`textarea`);t.value=e,t.style.position=`fixed`,t.style.left=`-999999px`,document.body.appendChild(t),t.select(),document.execCommand(`copy`),document.body.removeChild(t),g(!0),setTimeout(()=>g(!1),2e3)}}},x=(n.parameters||[]).filter(e=>e.in===`path`),S=(n.parameters||[]).filter(e=>e.in===`query`),C=[`post`,`put`,`patch`].includes(t)&&n.requestBody;return(0,G.jsxs)(`div`,{className:`border border-bambu-dark-tertiary rounded-lg overflow-hidden`,children:[(0,G.jsxs)(`button`,{onClick:()=>o(!a),className:`w-full flex items-center gap-3 p-3 hover:bg-bambu-dark-tertiary/50 transition-colors text-left`,children:[a?(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray flex-shrink-0`}):(0,G.jsx)(ms,{className:`w-4 h-4 text-bambu-gray flex-shrink-0`}),(0,G.jsx)(`span`,{className:`px-2 py-0.5 text-xs font-mono font-semibold uppercase rounded border ${DGe[t]||`bg-gray-500/20 text-gray-400`}`,children:t}),(0,G.jsx)(`code`,{className:`text-sm text-white font-mono flex-1 truncate`,children:e}),n.summary&&(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray truncate max-w-[40%]`,children:n.summary})]}),a&&(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary p-4 space-y-4 bg-bambu-dark/50`,children:[n.description&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n.description}),x.length>0&&(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-white`,children:`Path Parameters`}),(0,G.jsx)(`div`,{className:`space-y-2`,children:x.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`label`,{className:`text-sm text-bambu-gray w-32 flex-shrink-0`,children:[e.name,e.required&&(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400 ml-1`,children:`*`})]}),(0,G.jsx)(`input`,{type:`text`,value:s[e.name]||``,onChange:t=>c(n=>({...n,[e.name]:t.target.value})),placeholder:e.description||e.schema?.type||`value`,className:`flex-1 px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm font-mono focus:border-bambu-green focus:outline-none`})]},e.name))})]}),S.length>0&&(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-white`,children:`Query Parameters`}),(0,G.jsx)(`div`,{className:`space-y-2`,children:S.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`label`,{className:`text-sm text-bambu-gray w-32 flex-shrink-0`,children:[e.name,e.required&&(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400 ml-1`,children:`*`})]}),e.schema?.enum?(0,G.jsxs)(`select`,{value:s[e.name]||``,onChange:t=>c(n=>({...n,[e.name]:t.target.value})),className:`flex-1 px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:``,children:`-- Select --`}),e.schema.enum.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]}):(0,G.jsx)(`input`,{type:`text`,value:s[e.name]||``,onChange:t=>c(n=>({...n,[e.name]:t.target.value})),placeholder:e.description||e.schema?.type||`value`,className:`flex-1 px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm font-mono focus:border-bambu-green focus:outline-none`})]},e.name))})]}),C&&(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-white`,children:`Request Body`}),(0,G.jsx)(`textarea`,{value:l,onChange:e=>u(e.target.value),rows:8,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm font-mono focus:border-bambu-green focus:outline-none resize-y`,placeholder:`JSON request body...`})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(Q,{onClick:v,disabled:p,children:[p?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Ml,{className:`w-4 h-4`}),`Execute`]}),_.length>0&&(0,G.jsxs)(`span`,{className:`text-xs text-yellow-700 dark:text-yellow-400 flex items-center gap-1`,children:[(0,G.jsx)(ys,{className:`w-3 h-3`}),`Fill in: `,_.join(`, `)]})]}),d&&(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`h4`,{className:`text-sm font-medium text-white flex items-center gap-2`,children:[`Response`,(0,G.jsxs)(`span`,{className:`px-2 py-0.5 text-xs rounded ${d.status>=200&&d.status<300?`bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-400`:d.status>=400?`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`:`bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`}`,children:[d.status,` `,d.statusText]}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[d.duration,`ms`]})]}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:b,children:h?(0,G.jsx)(xs,{className:`w-3 h-3 text-green-600 dark:text-green-400`}):(0,G.jsx)(Vs,{className:`w-3 h-3`})})]}),(0,G.jsx)(`pre`,{className:`p-3 bg-bambu-dark rounded-lg text-sm font-mono text-white overflow-auto max-h-96 border border-bambu-dark-tertiary`,children:typeof d.body==`string`?d.body:JSON.stringify(d.body,null,2)})]})]})]})}function AGe({apiKey:e=``}){let[t,n]=(0,y.useState)(null),[r,i]=(0,y.useState)(!0),[a,o]=(0,y.useState)(null),[s,c]=(0,y.useState)(new Set),[l,u]=(0,y.useState)(``);if((0,y.useEffect)(()=>{async function e(){try{let e=await fetch(`/openapi.json`);if(!e.ok)throw Error(`Failed to fetch OpenAPI schema`);n(await e.json())}catch(e){o(e instanceof Error?e.message:`Unknown error`)}finally{i(!1)}}e()},[]),r)return(0,G.jsx)(`div`,{className:`flex justify-center py-12`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})});if(a||!t)return(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-8`,children:(0,G.jsxs)(`div`,{className:`text-center text-red-700 dark:text-red-400`,children:[(0,G.jsx)(ys,{className:`w-12 h-12 mx-auto mb-3 opacity-50`}),(0,G.jsx)(`p`,{children:`Failed to load API schema`}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:a})]})})});let d={};for(let[e,n]of Object.entries(t.paths))for(let[t,r]of Object.entries(n)){if(t===`parameters`)continue;let n=r.tags||[`Other`];for(let i of n)d[i]||(d[i]=[]),d[i].push({path:e,method:t,spec:r})}let f=Object.entries(d).map(([e,t])=>l?{tag:e,endpoints:t.filter(({path:e,method:t,spec:n})=>{let r=l.toLowerCase();return e.toLowerCase().includes(r)||t.toLowerCase().includes(r)||(n.summary?.toLowerCase()||``).includes(r)||(n.description?.toLowerCase()||``).includes(r)})}:{tag:e,endpoints:t}).filter(({endpoints:e})=>e.length>0).sort((e,t)=>e.tag.localeCompare(t.tag)),p=e=>{c(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})};return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-4`,children:[(0,G.jsx)(`div`,{className:`flex-1`,children:(0,G.jsx)(`input`,{type:`text`,value:l,onChange:e=>u(e.target.value),placeholder:`Search endpoints...`,className:`w-full max-w-md px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>{c(new Set(f.map(e=>e.tag)))},children:`Expand All`}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>{c(new Set)},children:`Collapse All`}),(0,G.jsxs)(`a`,{href:`/docs`,target:`_blank`,rel:`noopener noreferrer`,className:`flex items-center gap-1 text-sm text-bambu-green hover:underline`,children:[(0,G.jsx)(nc,{className:`w-4 h-4`}),`Swagger UI`]})]})]}),(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[f.reduce((e,t)=>e+t.endpoints.length,0),` endpoints in `,f.length,` categories`]}),(0,G.jsx)(`div`,{className:`space-y-3`,children:f.map(({tag:n,endpoints:r})=>(0,G.jsxs)(Ld,{children:[(0,G.jsx)(`button`,{onClick:()=>p(n),className:`w-full flex items-center justify-between p-4 hover:bg-bambu-dark-tertiary/30 transition-colors text-left`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[s.has(n)?(0,G.jsx)(ps,{className:`w-5 h-5 text-bambu-gray`}):(0,G.jsx)(ms,{className:`w-5 h-5 text-bambu-gray`}),(0,G.jsx)(`h3`,{className:`text-base font-semibold text-white capitalize`,children:n.replace(/-/g,` `)}),(0,G.jsx)(`span`,{className:`text-xs bg-bambu-dark-tertiary px-2 py-0.5 rounded-full text-bambu-gray`,children:r.length})]})}),s.has(n)&&(0,G.jsx)(zd,{className:`pt-0 space-y-2`,children:r.map(({path:n,method:r,spec:i})=>(0,G.jsx)(kGe,{path:n,method:r,spec:i,schema:t,apiKey:e},`${r}-${n}`))})]},n))})]})}var jGe=[{id:`sidecar`,labelKey:`settings.sliceEngineSidecar`,descriptionKey:`settings.sliceEngineSidecarHint`,available:!0},{id:`browser`,labelKey:`settings.sliceEngineBrowser`,descriptionKey:`settings.sliceEngineBrowserHint`,available:!1}];function l5(){return jGe.filter(e=>e.available)}function MGe(){return l5().length>1}function u5(e){return l5().find(t=>t.id===e)?.id??`sidecar`}var NGe=[`general`,`plugs`,`sensors`,`notifications`,`queue`,`filament`,`network`,`apikeys`,`virtual-printer`,`spoolbuddy`,`failure-detection`,`users`,`backup`];s5({labelKey:`settings.general`,tab:`general`,keywords:`language date time format printer model printers cards`,anchor:`card-general`}),s5({labelKey:`settings.appearance`,tab:`general`,keywords:`theme dark light mode colors`,anchor:`card-appearance`}),s5({labelKey:`settings.archiveSettings`,tab:`general`,keywords:`archive auto save thumbnails captures`,anchor:`card-archive`}),s5({labelKey:`settings.camera`,tab:`general`,keywords:`camera external video stream`,anchor:`card-camera`}),s5({labelKey:`settings.costTracking`,tab:`general`,keywords:`currency filament cost energy kwh price`,anchor:`card-cost`}),s5({labelKey:`settings.fileManager`,tab:`general`,keywords:`file manager archive mode disk warning storage`,anchor:`card-filemanager`}),s5({labelKey:`settings.updates`,tab:`general`,keywords:`updates version firmware beta check`,anchor:`card-updates`}),s5({labelKey:`settings.dataManagement`,tab:`general`,keywords:`data reset clear logs notifications preferences`,anchor:`card-data`}),s5({labelKey:`settings.smartPlugs`,tab:`plugs`,keywords:`smart plug energy power automation tapo kasa tplink shelly`,anchor:`card-plugs`}),s5({labelKey:`haSensors.sectionTitle`,tab:`sensors`,keywords:`home assistant sensor printer temperature humidity alert notify block print`,anchor:`card-ha-sensors`}),s5({labelKey:`locationHaSensors.sectionTitle`,tab:`sensors`,keywords:`home assistant sensor location storage box temperature humidity battery alert notify`,anchor:`card-location-sensors`}),s5({labelKey:`settings.providers`,tab:`notifications`,keywords:`telegram discord email notification providers webhook`,anchor:`card-providers`}),s5({labelKey:`settings.messageTemplates`,tab:`notifications`,keywords:`message templates notification text edit`,anchor:`card-templates`}),s5({labelKey:`settings.defaultPrintOptions`,labelFallback:`Default Print Options`,tab:`queue`,keywords:`print bed leveling flow calibration vibration first layer timelapse`,anchor:`card-print-options`}),s5({labelKey:`settings.tempFanPresetsTitle`,labelFallback:`Temperature & Fan Presets`,tab:`queue`,keywords:`temperature fan presets nozzle bed chamber quick buttons popover`,anchor:`card-temp-fan-presets`}),s5({labelKey:`settings.staggeredStart`,labelFallback:`Staggered Start`,tab:`queue`,keywords:`staggered batch delay start queue group`,anchor:`card-staggered`}),s5({labelKey:`settings.plateClear`,labelFallback:`Plate-Clear Confirmation`,tab:`queue`,keywords:`plate clear confirm auto queue`,anchor:`card-plate`}),s5({labelKey:`settings.concurrentUploadsTitle`,labelFallback:`Concurrent Uploads`,tab:`queue`,keywords:`concurrent parallel upload transfer ftp queue slow farm simultaneous`,anchor:`card-concurrent-uploads`}),s5({labelKey:`settings.gcodeInjection`,labelFallback:`G-code Injection`,tab:`queue`,keywords:`gcode injection start end autoprint farmloop swapmod autoclear printflow`,anchor:`card-gcode`}),s5({labelKey:`settings.slicerCard`,labelFallback:`Slicer`,tab:`queue`,keywords:`slicer orcaslicer bambustudio orca bambu api sidecar url docker preferred`,anchor:`card-slicer`}),s5({labelKey:`settings.queueDrying`,tab:`queue`,keywords:`drying presets temperature time humidity ams`,anchor:`card-drying`}),s5({labelKey:`settings.filamentChecks`,tab:`filament`,keywords:`filament check warning runout remaining`,anchor:`card-filamentchecks`}),s5({labelKey:`settings.printModal`,tab:`filament`,keywords:`print modal custom mapping`,anchor:`card-printmodal`}),s5({labelKey:`settings.amsDisplayThresholds`,tab:`filament`,keywords:`ams humidity temperature threshold history retention`,anchor:`card-amsthresholds`}),s5({labelKey:`settings.externalUrl`,tab:`network`,keywords:`external url reverse proxy public notification link`,anchor:`card-externalurl`}),s5({labelKey:`settings.ftpRetry`,tab:`network`,keywords:`ftp retry upload retries backoff`,anchor:`card-ftpretry`}),s5({labelKey:`settings.homeAssistant`,tab:`network`,keywords:`home assistant ha hass mqtt integration`,anchor:`card-ha`}),s5({labelKey:`settings.mqttPublishing`,tab:`network`,keywords:`mqtt publish broker topic`,anchor:`card-mqtt`}),s5({labelKey:`settings.prometheusMetrics`,tab:`network`,keywords:`prometheus metrics grafana monitoring bearer token`,anchor:`card-prometheus`}),s5({labelKey:`settings.createNewApiKey`,tab:`apikeys`,keywords:`api key create permission scope`,anchor:`card-createapi`}),s5({labelKey:`settings.webhookEndpoints`,tab:`apikeys`,keywords:`webhook endpoint post http`,anchor:`card-webhooks`}),s5({labelKey:`settings.apiBrowser`,tab:`apikeys`,keywords:`api browser endpoint documentation test`,anchor:`card-apibrowser`}),s5({labelKey:`cameraTokens.title`,tab:`apikeys`,keywords:`camera token long-lived home assistant frigate kiosk stream`,anchor:`card-camera-tokens`}),s5({labelKey:`settings.tabs.virtualPrinter`,tab:`virtual-printer`,keywords:`virtual printer proxy archive slicer bambustudio orcaslicer ip bind`,anchor:`card-vp`}),s5({labelKey:`settings.tabs.spoolbuddy`,tab:`spoolbuddy`,keywords:`spoolbuddy device scale nfc rfid kiosk unregister`,anchor:`card-spoolbuddy`}),s5({labelKey:`settings.currentUser`,tab:`users`,subTab:`users`,keywords:`current user profile password change`,anchor:`card-currentuser`}),s5({labelKey:`settings.users`,tab:`users`,subTab:`users`,keywords:`users accounts list`,anchor:`card-users`}),s5({labelKey:`settings.groups`,tab:`users`,subTab:`users`,keywords:`groups roles permissions administrators operators viewers`,anchor:`card-groups`}),s5({labelKey:`settings.sessionPolicy.title`,labelFallback:`Session Policy`,tab:`users`,subTab:`users`,keywords:`session timeout expiry logout remember me jwt token lifetime`,anchor:`card-session-policy`}),s5({labelKey:`settings.email.smtpSettings`,labelFallback:`SMTP Configuration`,tab:`users`,subTab:`email`,keywords:`smtp email send server port password auth starttls ssl`,anchor:`card-smtp`}),s5({labelKey:`settings.ldap.title`,labelFallback:`LDAP Authentication`,tab:`users`,subTab:`ldap`,keywords:`ldap active directory ad authentication bind dn search base group mapping`,anchor:`card-ldap`}),s5({labelKey:`settings.tabs.backup`,tab:`backup`,keywords:`backup github restore download cloud sync profiles archives`,anchor:`card-backup`}),s5({labelKey:`externalLinks.sidebarLayout`,labelFallback:`Sidebar`,tab:`general`,keywords:`sidebar layout links pages hide show external custom navigation url add`,anchor:`card-sidebar-links`}),s5({labelKey:`settings.filamentTracking`,tab:`filament`,keywords:`spoolman filament tracking inventory sync remote integration`,anchor:`card-spoolman`}),s5({labelKey:`settings.catalog.spoolCatalog`,labelFallback:`Spool Catalog`,tab:`filament`,keywords:`spool catalog entries brand material reset import export`,anchor:`card-spool-catalog`}),s5({labelKey:`settings.colorCatalog.title`,labelFallback:`Color Catalog`,tab:`filament`,keywords:`color catalog hex swatch palette sync reset`,anchor:`card-color-catalog`}),s5({labelKey:`settings.tabs.failureDetection`,labelFallback:`Failure Detection`,tab:`failure-detection`,keywords:`failure detection ai ml obico spaghetti detect monitoring`,anchor:`card-fd-ml`}),s5({labelKey:`failureDetection.perPrinterTitle`,labelFallback:`Per-Printer Settings`,tab:`failure-detection`,keywords:`failure detection per printer enable per-printer sensitivity`,anchor:`card-fd-perprinter`}),s5({labelKey:`failureDetection.statusTitle`,labelFallback:`Detection Status`,tab:`failure-detection`,keywords:`failure detection status running connection`,anchor:`card-fd-status`}),s5({labelKey:`failureDetection.historyTitle`,labelFallback:`Detection History`,tab:`failure-detection`,keywords:`failure detection history log events`,anchor:`card-fd-history`}),s5({labelKey:`settings.email.advancedAuth`,labelFallback:`Advanced Email Authentication`,tab:`users`,subTab:`email`,keywords:`email authentication advanced password reset self-service forgot`,anchor:`card-email-advanced-auth`}),s5({labelKey:`settings.email.testConnection`,labelFallback:`Test SMTP Connection`,tab:`users`,subTab:`email`,keywords:`email smtp test connection send check`,anchor:`card-email-test`}),s5({labelKey:`settings.twoFa.totpTitle`,labelFallback:`Authenticator App (TOTP)`,tab:`users`,subTab:`twofa`,keywords:`two factor 2fa totp authenticator app google authy otp`,anchor:`card-2fa-totp`}),s5({labelKey:`settings.twoFa.emailOtpTitle`,labelFallback:`Email One-Time Codes`,tab:`users`,subTab:`twofa`,keywords:`two factor 2fa email otp one time code`,anchor:`card-2fa-emailotp`}),s5({labelKey:`settings.twoFa.linkedAccounts`,labelFallback:`Linked Accounts`,tab:`users`,subTab:`twofa`,keywords:`two factor 2fa linked accounts sso oidc provider google github`,anchor:`card-2fa-linked`}),s5({labelKey:`settings.oidc.title`,labelFallback:`Single Sign-On (OIDC)`,tab:`users`,subTab:`oidc`,keywords:`sso oidc openid single sign-on pocketid authentik keycloak google okta azure provider`,anchor:`card-oidc`}),s5({labelKey:`settings.ldap.serverConfig`,labelFallback:`LDAP Server Configuration`,tab:`users`,subTab:`ldap`,keywords:`ldap server url bind dn user search base group filter tls`,anchor:`card-ldap-server`}),s5({labelKey:`backup.githubBackup`,labelFallback:`GitHub Backup`,tab:`backup`,keywords:`github backup cloud remote sync profiles token`,anchor:`card-backup-github`}),s5({labelKey:`backup.history`,labelFallback:`Backup History`,tab:`backup`,keywords:`backup history log runs github commits`,anchor:`card-backup-history`}),s5({labelKey:`backup.localBackup`,labelFallback:`Local Backup`,tab:`backup`,keywords:`local backup download zip manual export`,anchor:`card-backup-local`}),s5({labelKey:`backup.scheduledBackup`,labelFallback:`Scheduled Backups`,tab:`backup`,keywords:`scheduled backup automatic hourly daily weekly retention local path`,anchor:`card-backup-scheduled`});var PGe=20,FGe={database:`bg-blue-600`,library_files:`bg-green-500`,library_thumbnails:`bg-teal-500`,library_other:`bg-emerald-700`,archive_timelapses:`bg-red-500`,archive_thumbnails:`bg-amber-500`,archive_files:`bg-sky-500`,virtual_printer_uploads:`bg-purple-500`,virtual_printer_upload_cache:`bg-fuchsia-500`,virtual_printer_certs:`bg-violet-500`,virtual_printer_other:`bg-purple-700`,downloads:`bg-cyan-500`,plate_calibration:`bg-lime-500`,logs:`bg-orange-500`,other_data:`bg-yellow-500`},IGe=[`bg-blue-500`,`bg-green-500`,`bg-yellow-500`,`bg-red-500`,`bg-orange-500`,`bg-teal-500`,`bg-cyan-500`,`bg-purple-500`],LGe=(e,t)=>FGe[e]||IGe[t%IGe.length],RGe={temperature:0,humidity:1,battery:2};function zGe(e,t){return e?BT(e,t,{decimals:2}):null}function BGe(){let e=co(),t=or(),[n,r]=Ri(),{t:i,i18n:a}=U(),{showToast:o}=Gd(),{authEnabled:s,user:c,isAdmin:l,refreshAuth:u,hasPermission:d}=jd(),{mode:f,resolvedMode:p,darkStyle:m,darkBackground:h,darkAccent:g,lightStyle:_,lightBackground:v,lightAccent:b,setMode:x,setDarkStyle:S,setDarkBackground:C,setDarkAccent:w,setLightStyle:T,setLightBackground:E,setLightAccent:D,progressInTitle:O,setProgressInTitle:k}=Pd(),[A,j]=(0,y.useState)(null),[M,N]=(0,y.useState)({}),[P,F]=(0,y.useState)(!1),[I,L]=(0,y.useState)(null),[R,z]=(0,y.useState)(!1),[B,V]=(0,y.useState)(null),[ee,te]=(0,y.useState)(!1),[ne,re]=(0,y.useState)(null),[ie,ae]=(0,y.useState)(!1),{colorize:oe,aboveColor:se,belowColor:H,optimalColor:ce}=CUe(),[le,ue]=(0,y.useState)(null),[de,fe]=(0,y.useState)(!1),[pe,me]=(0,y.useState)(null),[he,ge]=(0,y.useState)(null),[_e,ve]=(0,y.useState)(``),[ye,be]=(0,y.useState)(``),[xe,Se]=(0,y.useState)(!1),[Ce,we]=(0,y.useState)(!1),[Te,Ee]=(0,y.useState)(!1),[De,Oe]=(0,y.useState)(lm()),ke=n.get(`tab`),Ae=ke===`email`,[je,Me]=(0,y.useState)(Ae?`users`:ke&&NGe.includes(ke)?ke:`general`),[Ne,Pe]=(0,y.useState)(Ae?`email`:`users`),[Fe,Ie]=(0,y.useState)(ke===`queue`&&n.get(`sub`)===`pipelines`?`pipelines`:`dispatch`),Le=e=>{Me(e),e===`users`&&Pe(`users`),e===`queue`&&(Ie(`dispatch`),n.delete(`sub`)),e===`general`?n.delete(`tab`):n.set(`tab`,e),r(n,{replace:!0})},Re=e=>{Ie(e),e===`pipelines`?n.set(`sub`,`pipelines`):n.delete(`sub`),r(n,{replace:!0})},[ze,Be]=(0,y.useState)(!1),[Ve,He]=(0,y.useState)(``),[Ue,We]=(0,y.useState)({can_queue:!0,can_control_printer:!1,can_read_status:!0,can_manage_library:!0,can_manage_inventory:!0,can_manage_maintenance:!0,can_manage_archives:!0,can_manage_projects:!0,can_access_cloud:!1,can_update_energy_cost:!1}),[Ge,Ke]=(0,y.useState)(null),[qe,Je]=(0,y.useState)(!1),[Ye,Xe]=(0,y.useState)(null),[Ze,Qe]=(0,y.useState)(``),[$e,et]=(0,y.useState)(!1),[tt,nt]=(0,y.useState)(!1),[rt,it]=(0,y.useState)(null),[at,ot]=(0,y.useState)(!1),[st,ct]=(0,y.useState)(!1),[lt,ut]=(0,y.useState)(!1),[dt,ft]=(0,y.useState)({currentPassword:``,newPassword:``,confirmPassword:``}),[pt,mt]=(0,y.useState)(!1),[ht,gt]=(0,y.useState)(!1),[_t,vt]=(0,y.useState)(!1),[yt,bt]=(0,y.useState)(`local`),[xt,St]=(0,y.useState)(!1),[Ct,wt]=(0,y.useState)(null),[Tt,Et]=(0,y.useState)(null),[Dt,Ot]=(0,y.useState)(null),[At,jt]=(0,y.useState)(!1),[Mt,Nt]=(0,y.useState)({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]}),[Pt,Ft]=(0,y.useState)(null),[It,Lt]=(0,y.useState)(null),[Rt,zt]=(0,y.useState)(!1),[Bt,Vt]=(0,y.useState)({}),[Ht,Ut]=(0,y.useState)({}),Wt=e=>{Oe(e),xee(e),o(i(`settings.toast.settingsSaved`),`success`)},{data:Gt,isLoading:Kt}=K({queryKey:[`settings`],queryFn:Z.getSettings}),{data:qt,isLoading:Jt,isFetching:Yt}=K({queryKey:[`storage-usage`],queryFn:()=>Z.getStorageUsage(),enabled:je===`general`,staleTime:1/0,refetchInterval:!1,refetchOnWindowFocus:!1,refetchOnReconnect:!1}),Xt=async()=>{gt(!0);try{let t=await Z.getStorageUsage({refresh:!0});e.setQueryData([`storage-usage`],t)}catch(e){o(e instanceof Error?e.message:`Failed to refresh storage usage`,`error`)}finally{gt(!1)}},{data:Zt,isLoading:Qt}=K({queryKey:[`smart-plugs`],queryFn:Z.getSmartPlugs}),{data:$t,isLoading:en}=K({queryKey:[`smart-plugs-energy`,Zt?.map(e=>e.id)],queryFn:async()=>{if(!Zt||Zt.length===0)return null;let e=await Promise.all(Zt.filter(e=>e.enabled).map(async e=>{try{return{plug:e,status:await Z.getSmartPlugStatus(e.id)}}catch{return{plug:e,status:null}}})),t=0,n=0,r=0,i=0,a=0;for(let{plug:o,status:s}of e){let e=o.plug_type===`mqtt`&&s?.energy?.power!=null;(s?.reachable||e)&&(a++,s?.energy?.power!=null&&(t+=s.energy.power),s?.energy?.today!=null&&(n+=s.energy.today),s?.energy?.yesterday!=null&&(r+=s.energy.yesterday),s?.energy?.total!=null&&(i+=s.energy.total))}return{totalPower:t,totalToday:n,totalYesterday:r,totalLifetime:i,reachableCount:a,totalPlugs:Zt.filter(e=>e.enabled).length}},enabled:je===`plugs`&&!!Zt&&Zt.length>0,refetchInterval:je===`plugs`?1e4:!1}),{data:tn,isLoading:W}=K({queryKey:[`notification-providers`],queryFn:Z.getNotificationProviders}),{data:nn,isLoading:rn}=K({queryKey:[`api-keys`],queryFn:Z.getAPIKeys}),an=q({mutationFn:e=>Z.createAPIKey(e),onSuccess:t=>{Ke(t.key||null),Be(!1),He(``),e.invalidateQueries({queryKey:[`api-keys`]}),o(i(`settings.toast.apiKeyCreated`))},onError:e=>{o(`Failed to create API key: ${e.message}`,`error`)}}),on=q({mutationFn:e=>Z.deleteAPIKey(e),onSuccess:(t,n)=>{e.setQueryData([`api-keys`],e=>(e??[]).filter(e=>e.id!==n)),o(i(`settings.toast.apiKeyDeleted`))},onError:e=>{o(`Failed to delete API key: ${e.message}`,`error`)}}),{data:sn}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:cn}=K({queryKey:[`haSensors`],queryFn:()=>Z.getHASensors()}),{data:ln}=K({queryKey:[`locationHaSensors`],queryFn:()=>Z.getLocationHASensors()}),{data:un}=K({queryKey:S8,queryFn:Z.getLocations,enabled:je===`sensors`}),dn=Co({queries:(0,y.useMemo)(()=>Array.from(new Set((ln??[]).map(e=>e.location_id))),[ln]).map(e=>({queryKey:[`locationHaSensorReadings`,e],queryFn:()=>Z.getLocationHASensorReadings(e,!1),enabled:je===`sensors`,refetchInterval:je===`sensors`?(Gt?.location_sensor_poll_interval||120)*1e3:!1}))}),fn=(0,y.useMemo)(()=>{let e=new Map;for(let t of dn)for(let n of t.data??[])e.set(n.id,n);return e},[dn]),pn=q({mutationFn:async e=>{for(let t of e)await Z.deleteLocationHASensor(t)},onSuccess:()=>{o(i(`locationHaSensors.toast.deleted`),`success`)},onError:e=>{o(e.message,`error`)},onSettled:()=>{e.invalidateQueries({queryKey:[`locationHaSensors`]}),e.invalidateQueries({queryKey:[`locationHaSensorReadings`]}),ue(null)}}),mn=If(sn?.length??0),{data:hn,isLoading:gn}=K({queryKey:[`notification-templates`],queryFn:Z.getNotificationTemplates}),{data:_n}=K({queryKey:[`virtual-printer-settings`],queryFn:Sd.getSettings,refetchInterval:1e4}),vn=_n?.status?.running??!1,{data:yn}=K({queryKey:[`spoolbuddy-devices`],queryFn:()=>Dd.getDevices(),refetchInterval:15e3}),bn=yn?.length??0,xn=yn?.some(e=>e.online)??!1,{data:Sn}=K({queryKey:[`obico-status`],queryFn:Z.getObicoStatus,refetchInterval:15e3}),Cn=!!(Sn?.is_running&&Sn?.enabled),{data:wn}=K({queryKey:[`ffmpeg-status`],queryFn:Z.checkFfmpeg}),{data:Tn}=K({queryKey:[`version`],queryFn:Z.getVersion}),En=!s||d(`library:purge`),{data:Dn}=K({queryKey:[`library-trash-settings`],queryFn:()=>Z.getLibraryTrashSettings(),enabled:En}),On=q({mutationFn:e=>Z.updateLibraryTrashSettings(e),onSuccess:()=>{e.invalidateQueries({queryKey:[`library-trash-settings`]}),o(i(`settings.toast.settingsSaved`),`success`)},onError:e=>o(e.message||i(`libraryAutoPurge.saveFailed`),`error`)}),kn=e=>{Dn&&On.mutate({retention_days:Dn.retention_days,auto_purge_enabled:Dn.auto_purge_enabled,auto_purge_days:Dn.auto_purge_days,auto_purge_include_never_printed:Dn.auto_purge_include_never_printed,...e})},An=!s||d(`archives:purge`),{data:jn}=K({queryKey:[`archive-purge-settings`],queryFn:()=>Z.getArchivePurgeSettings(),enabled:An}),Mn=q({mutationFn:e=>Z.updateArchivePurgeSettings(e),onSuccess:()=>{e.invalidateQueries({queryKey:[`archive-purge-settings`]}),o(i(`settings.toast.settingsSaved`),`success`)},onError:e=>o(e.message||i(`archiveAutoPurge.saveFailed`),`error`)}),Nn=e=>{jn&&Mn.mutate({enabled:jn.enabled,days:jn.days,purge_stats:jn.purge_stats,...e})},{data:Pn,refetch:Fn,isRefetching:In}=K({queryKey:[`updateCheck`],queryFn:Z.checkForUpdates,enabled:Gt?.check_updates!==!1,staleTime:300*1e3}),{data:Ln,refetch:Rn}=K({queryKey:[`updateStatus`],queryFn:Z.getUpdateStatus,refetchInterval:e=>{let t=e.state.data;return t?.status===`downloading`||t?.status===`installing`?1e3:!1}}),{data:zn}=K({queryKey:[`mqtt-status`],queryFn:Z.getMQTTStatus,refetchInterval:je===`network`?5e3:!1}),{data:Bn}=K({queryKey:[`github-backup-status`],queryFn:Z.getGitHubBackupStatus}),{data:Vn}=K({queryKey:[`cloud-status`],queryFn:Z.getCloudStatus}),{data:Hn={advanced_auth_enabled:!1,smtp_configured:!1,local_login_enabled:!0,autologin_provider_id:null}}=K({queryKey:[`advancedAuthStatus`],queryFn:()=>Z.getAdvancedAuthStatus()}),{data:Un}=K({queryKey:[`ldapStatus`],queryFn:()=>Z.getLDAPStatus()}),{data:Wn}=K({queryKey:[`twoFAStatus`],queryFn:()=>Z.get2FAStatus()}),{data:Gn=[]}=K({queryKey:[`oidcProvidersAll`],queryFn:()=>Z.getOIDCProvidersAll(),enabled:l}),{data:Kn=[],isLoading:qn}=K({queryKey:[`users`],queryFn:()=>Z.getUsers(),enabled:s&&d(`users:read`)}),{data:Jn=[],isLoading:Yn}=K({queryKey:[`groups`],queryFn:()=>Z.getGroups(),enabled:s&&d(`groups:read`)}),Xn=q({mutationFn:e=>Z.createUser(e),onSuccess:()=>{e.invalidateQueries({queryKey:[`users`]}),e.invalidateQueries({queryKey:[`groups`]}),vt(!1),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]}),o(i(`settings.toast.userCreated`))},onError:e=>{o(e.message,`error`)}}),Zn=q({mutationFn:({id:e,data:t})=>Z.updateUser(e,t),onSuccess:()=>{e.invalidateQueries({queryKey:[`users`]}),e.invalidateQueries({queryKey:[`groups`]}),St(!1),wt(null),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]}),o(i(`settings.toast.userUpdated`))},onError:e=>{o(e.message,`error`)}}),Qn=q({mutationFn:({id:e,deleteItems:t})=>Z.deleteUser(e,t),onSuccess:()=>{e.invalidateQueries({queryKey:[`users`]}),o(i(`settings.toast.userDeleted`)),Et(null),Ot(null)},onError:e=>{o(e.message,`error`)}}),$n=q({mutationFn:e=>Z.resetUserPassword({user_id:e}),onSuccess:e=>{o(e.message,`success`)},onError:e=>{o(e.message,`error`)}}),er=async e=>{Et(e),jt(!0);try{Ot(await Z.getUserItemsCount(e))}catch{Ot({archives:0,queue_items:0,library_files:0})}finally{jt(!1)}},tr=q({mutationFn:e=>Z.deleteGroup(e),onSuccess:()=>{e.invalidateQueries({queryKey:[`groups`]}),o(i(`settings.toast.groupDeleted`))},onError:e=>{o(e.message,`error`)}}),nr=()=>{let e=Hn?.advanced_auth_enabled||!1;if(!Mt.username){o(i(`settings.toast.fillRequiredFields`),`error`);return}if(e&&!Mt.email){o(`Email is required when advanced authentication is enabled`,`error`);return}if(!e){if(!Mt.password){o(i(`settings.toast.fillRequiredFields`),`error`);return}if(Mt.password!==Mt.confirmPassword){o(i(`settings.toast.passwordsDoNotMatch`),`error`);return}let e=x8(Mt.password);if(e){o(i({tooShort:`settings.toast.passwordTooShort`,needsUppercase:`settings.toast.passwordNeedsUppercase`,needsLowercase:`settings.toast.passwordNeedsLowercase`,needsDigit:`settings.toast.passwordNeedsDigit`,needsSpecial:`settings.toast.passwordNeedsSpecial`}[e]),`error`);return}}Xn.mutate({username:Mt.username,password:e?void 0:Mt.password,email:Mt.email||void 0,role:Mt.role,group_ids:Mt.group_ids.length>0?Mt.group_ids:void 0})},rr=e=>{if(Mt.password){if(Mt.password!==Mt.confirmPassword){o(i(`settings.toast.passwordsDoNotMatch`),`error`);return}let e=x8(Mt.password);if(e){o(i({tooShort:`settings.toast.passwordTooShort`,needsUppercase:`settings.toast.passwordNeedsUppercase`,needsLowercase:`settings.toast.passwordNeedsLowercase`,needsDigit:`settings.toast.passwordNeedsDigit`,needsSpecial:`settings.toast.passwordNeedsSpecial`}[e]),`error`);return}}let t={username:Mt.username||void 0,password:Mt.password||void 0,email:Mt.email||void 0,role:Mt.role,group_ids:Mt.group_ids};t.password||delete t.password,Zn.mutate({id:e,data:t})},ir=e=>{wt(e.id),Nt({username:e.username,password:``,email:e.email||``,confirmPassword:``,role:e.role,group_ids:e.groups?.map(e=>e.id)||[]}),St(!0)},ar=e=>{Nt(t=>({...t,group_ids:t.group_ids.includes(e)?t.group_ids.filter(t=>t!==e):[...t.group_ids,e]}))},sr=q({mutationFn:Z.applyUpdate,onSuccess:e=>{e.is_ha_addon||e.is_docker||e.is_windows_installer?o(e.message,`error`):Rn()}}),[cr,lr]=(0,y.useState)(null),ur=q({mutationFn:Z.testAllNotificationProviders,onSuccess:t=>{lr(t),e.invalidateQueries({queryKey:[`notification-providers`]}),t.failed===0?o(`All ${t.tested} providers tested successfully!`,`success`):o(`${t.success}/${t.tested} providers succeeded`,t.failed>0?`error`:`success`)},onError:e=>{o(`Failed to test providers: ${e.message}`,`error`)}}),dr=q({mutationFn:async e=>{if(!Zt)return{success:0,failed:0};let t=Zt.filter(e=>e.enabled),n=await Promise.all(t.map(async t=>{try{return await Z.controlSmartPlug(t.id,e),{success:!0}}catch{return{success:!1}}}));return{success:n.filter(e=>e.success).length,failed:n.filter(e=>!e.success).length}},onSuccess:(t,n)=>{e.invalidateQueries({queryKey:[`smart-plugs`]}),e.invalidateQueries({queryKey:[`smart-plugs-energy`]}),t.failed===0?o(`All ${t.success} plugs turned ${n}`,`success`):o(`${t.success} plugs turned ${n}, ${t.failed} failed`,`error`)},onError:e=>{o(`Failed: ${e.message}`,`error`)}}),fr=(0,y.useRef)(null),pr=(0,y.useRef)(null),mr=(0,y.useRef)(!1),hr=(0,y.useRef)(!0),gr=(0,y.useRef)(null);(0,y.useEffect)(()=>{if(Gt&&!A){let e={...Gt,external_url:Gt.external_url||window.location.origin};gr.current=Gt,j(e),setTimeout(()=>{hr.current=!1},100)}},[Gt,A]),(0,y.useEffect)(()=>{let e=gr.current;if(!Gt||!A||!e||Gt===e)return;let t={};for(let n of Object.keys(Gt))Gt[n]!==e[n]&&A[n]===e[n]&&(t[n]=Gt[n]);gr.current=Gt,Object.keys(t).length>0&&j(e=>e&&{...e,...t})},[Gt,A]);let _r=q({mutationFn:Z.updateSettings,onSuccess:t=>{gr.current=t,e.setQueryData([`settings`],t),e.invalidateQueries({queryKey:[`archiveStats`]}),e.invalidateQueries({queryKey:[`ui-flags`]}),o(i(`settings.toast.settingsSaved`),`success`)},onError:e=>{o(`Failed to save: ${e.message}`,`error`)},onSettled:()=>{mr.current=!1}}),vr=q({mutationFn:({id:e,data:t})=>Z.updatePrinter(e,t),onSuccess:()=>{e.invalidateQueries({queryKey:[`printers`]}),o(i(`settings.toast.cameraSettingsSaved`),`success`)},onError:e=>{o(`Failed to update printer: ${e.message}`,`error`)}});(0,y.useEffect)(()=>{let e=gr.current;if(!(hr.current||!A||!Gt||!e)&&!(s&&!d(`settings:update`))&&(e.auto_archive!==A.auto_archive||e.save_thumbnails!==A.save_thumbnails||e.capture_finish_photo!==A.capture_finish_photo||(e.finish_photo_restore_plate??!0)!==(A.finish_photo_restore_plate??!0)||e.default_filament_cost!==A.default_filament_cost||e.currency!==A.currency||e.energy_cost_per_kwh!==A.energy_cost_per_kwh||e.energy_tracking_mode!==A.energy_tracking_mode||e.check_updates!==A.check_updates||(e.check_printer_firmware??!0)!==(A.check_printer_firmware??!0)||(e.include_beta_updates??!1)!==(A.include_beta_updates??!1)||(e.local_login_enabled??!0)!==(A.local_login_enabled??!0)||e.notification_language!==A.notification_language||(e.bed_cooled_threshold??35)!==(A.bed_cooled_threshold??35)||e.ams_humidity_good!==A.ams_humidity_good||e.ams_humidity_fair!==A.ams_humidity_fair||e.ams_temp_good!==A.ams_temp_good||e.ams_temp_fair!==A.ams_temp_fair||(e.ams_temp_alarm??null)!==(A.ams_temp_alarm??null)||e.ams_history_retention_days!==A.ams_history_retention_days||e.disable_filament_warnings!==A.disable_filament_warnings||e.prefer_lowest_filament!==A.prefer_lowest_filament||(e.queue_drying_enabled??!1)!==(A.queue_drying_enabled??!1)||(e.queue_drying_block??!1)!==(A.queue_drying_block??!1)||(e.ambient_drying_enabled??!1)!==(A.ambient_drying_enabled??!1)||(e.print_drying_enabled??!1)!==(A.print_drying_enabled??!1)||(e.drying_presets??``)!==(A.drying_presets??``)||(e.ams_humidity_thresholds??``)!==(A.ams_humidity_thresholds??``)||e.per_printer_mapping_expanded!==A.per_printer_mapping_expanded||e.date_format!==A.date_format||e.time_format!==A.time_format||e.default_printer_id!==A.default_printer_id||e.ftp_retry_enabled!==A.ftp_retry_enabled||e.ftp_retry_count!==A.ftp_retry_count||e.ftp_retry_delay!==A.ftp_retry_delay||e.ftp_timeout!==A.ftp_timeout||e.mqtt_enabled!==A.mqtt_enabled||e.mqtt_broker!==A.mqtt_broker||e.mqtt_port!==A.mqtt_port||e.mqtt_username!==A.mqtt_username||e.mqtt_password!==A.mqtt_password||e.mqtt_topic_prefix!==A.mqtt_topic_prefix||e.mqtt_use_tls!==A.mqtt_use_tls||e.external_url!==A.external_url||e.ha_enabled!==A.ha_enabled||e.ha_url!==A.ha_url||e.ha_token!==A.ha_token||(e.library_archive_mode??`ask`)!==(A.library_archive_mode??`ask`)||Number(e.library_disk_warning_gb??5)!==Number(A.library_disk_warning_gb??5)||(e.preferred_slicer??`bambu_studio`)!==(A.preferred_slicer??`bambu_studio`)||u5(e.slice_engine)!==u5(A.slice_engine)||(e.open_in_slicer??null)!==(A.open_in_slicer??null)||(e.use_slicer_api??!1)!==(A.use_slicer_api??!1)||(e.orcaslicer_api_url??``)!==(A.orcaslicer_api_url??``)||(e.slicer_stall_timeout_minutes??15)!==(A.slicer_stall_timeout_minutes??15)||(e.bambu_studio_api_url??``)!==(A.bambu_studio_api_url??``)||e.prometheus_enabled!==A.prometheus_enabled||e.prometheus_token!==A.prometheus_token||(e.user_notifications_enabled??!0)!==(A.user_notifications_enabled??!0)||(e.default_bed_levelling??`auto`)!==(A.default_bed_levelling??`auto`)||(e.default_flow_cali??`auto`)!==(A.default_flow_cali??`auto`)||(e.default_vibration_cali??!0)!==(A.default_vibration_cali??!0)||(e.default_layer_inspect??!1)!==(A.default_layer_inspect??!1)||(e.default_timelapse??!1)!==(A.default_timelapse??!1)||(e.default_nozzle_offset_cali??`auto`)!==(A.default_nozzle_offset_cali??`auto`)||(e.stagger_group_size??2)!==(A.stagger_group_size??2)||(e.stagger_interval_minutes??5)!==(A.stagger_interval_minutes??5)||(e.require_plate_clear??!1)!==(A.require_plate_clear??!1)||(e.queue_max_concurrent_uploads??4)!==(A.queue_max_concurrent_uploads??4)||(e.preheat_enabled??!1)!==(A.preheat_enabled??!1)||(e.preheat_filament_targets??``)!==(A.preheat_filament_targets??``)||(e.preheat_max_wait_seconds??900)!==(A.preheat_max_wait_seconds??900)||(e.preheat_soak_seconds??300)!==(A.preheat_soak_seconds??300)||(e.queue_keep_bed_warm??!1)!==(A.queue_keep_bed_warm??!1)||(e.queue_keep_warm_bed_temp??90)!==(A.queue_keep_warm_bed_temp??90)||(e.queue_keep_warm_max_minutes??120)!==(A.queue_keep_warm_max_minutes??120)||(e.nozzle_temp_presets??``)!==(A.nozzle_temp_presets??``)||(e.bed_temp_presets??``)!==(A.bed_temp_presets??``)||(e.chamber_temp_presets??``)!==(A.chamber_temp_presets??``)||(e.fan_speed_presets??``)!==(A.fan_speed_presets??``)||(e.session_max_hours??24)!==(A.session_max_hours??24)||(e.billing_enabled??!1)!==(A.billing_enabled??!1)||(e.printer_kill_switch_enabled??!1)!==(A.printer_kill_switch_enabled??!1)||(e.finance_budget_reset_day??1)!==(A.finance_budget_reset_day??1)||(e.finance_budget_reset_timezone??`UTC`)!==(A.finance_budget_reset_timezone??`UTC`))&&!mr.current)return fr.current&&clearTimeout(fr.current),fr.current=setTimeout(()=>{if(mr.current)return;mr.current=!0;let e={auto_archive:A.auto_archive,save_thumbnails:A.save_thumbnails,capture_finish_photo:A.capture_finish_photo,finish_photo_restore_plate:A.finish_photo_restore_plate??!0,default_filament_cost:A.default_filament_cost,currency:A.currency,energy_cost_per_kwh:A.energy_cost_per_kwh,energy_tracking_mode:A.energy_tracking_mode,check_updates:A.check_updates,check_printer_firmware:A.check_printer_firmware,include_beta_updates:A.include_beta_updates,local_login_enabled:A.local_login_enabled,notification_language:A.notification_language,bed_cooled_threshold:A.bed_cooled_threshold,ams_humidity_good:A.ams_humidity_good,ams_humidity_fair:A.ams_humidity_fair,ams_temp_good:A.ams_temp_good,ams_temp_fair:A.ams_temp_fair,ams_temp_alarm:A.ams_temp_alarm??null,ams_history_retention_days:A.ams_history_retention_days,disable_filament_warnings:A.disable_filament_warnings,prefer_lowest_filament:A.prefer_lowest_filament,queue_drying_enabled:A.queue_drying_enabled,queue_drying_block:A.queue_drying_block,ambient_drying_enabled:A.ambient_drying_enabled,print_drying_enabled:A.print_drying_enabled,drying_presets:A.drying_presets,ams_humidity_thresholds:A.ams_humidity_thresholds,per_printer_mapping_expanded:A.per_printer_mapping_expanded,date_format:A.date_format,time_format:A.time_format,default_printer_id:A.default_printer_id,ftp_retry_enabled:A.ftp_retry_enabled,ftp_retry_count:A.ftp_retry_count,ftp_retry_delay:A.ftp_retry_delay,ftp_timeout:A.ftp_timeout,mqtt_enabled:A.mqtt_enabled,mqtt_broker:A.mqtt_broker,mqtt_port:A.mqtt_port,mqtt_username:A.mqtt_username,mqtt_password:A.mqtt_password,mqtt_topic_prefix:A.mqtt_topic_prefix,mqtt_use_tls:A.mqtt_use_tls,external_url:A.external_url,ha_enabled:A.ha_enabled,ha_url:A.ha_url,ha_token:A.ha_token,library_archive_mode:A.library_archive_mode,library_disk_warning_gb:A.library_disk_warning_gb,preferred_slicer:A.preferred_slicer,slice_engine:A.slice_engine,open_in_slicer:A.open_in_slicer,use_slicer_api:A.use_slicer_api,orcaslicer_api_url:A.orcaslicer_api_url,slicer_stall_timeout_minutes:A.slicer_stall_timeout_minutes,bambu_studio_api_url:A.bambu_studio_api_url,prometheus_enabled:A.prometheus_enabled,prometheus_token:A.prometheus_token,user_notifications_enabled:A.user_notifications_enabled,default_bed_levelling:A.default_bed_levelling,default_flow_cali:A.default_flow_cali,default_vibration_cali:A.default_vibration_cali,default_layer_inspect:A.default_layer_inspect,default_timelapse:A.default_timelapse,default_nozzle_offset_cali:A.default_nozzle_offset_cali,stagger_group_size:A.stagger_group_size,stagger_interval_minutes:A.stagger_interval_minutes,require_plate_clear:A.require_plate_clear,queue_max_concurrent_uploads:A.queue_max_concurrent_uploads,preheat_enabled:A.preheat_enabled,preheat_filament_targets:A.preheat_filament_targets,preheat_max_wait_seconds:A.preheat_max_wait_seconds,preheat_soak_seconds:A.preheat_soak_seconds,queue_keep_bed_warm:A.queue_keep_bed_warm,queue_keep_warm_bed_temp:A.queue_keep_warm_bed_temp,queue_keep_warm_max_minutes:A.queue_keep_warm_max_minutes,nozzle_temp_presets:A.nozzle_temp_presets,bed_temp_presets:A.bed_temp_presets,chamber_temp_presets:A.chamber_temp_presets,fan_speed_presets:A.fan_speed_presets,session_max_hours:A.session_max_hours,billing_enabled:A.billing_enabled,printer_kill_switch_enabled:A.printer_kill_switch_enabled,finance_budget_reset_day:A.finance_budget_reset_day,finance_budget_reset_timezone:A.finance_budget_reset_timezone};_r.mutate(e)},500),()=>{fr.current&&clearTimeout(fr.current)}},[A,Gt,_r,s,d,o,i]);let yr=(0,y.useCallback)((e,t)=>{if(s&&!d(`settings:update`)){o(i(`settings.toast.noPermissionUpdate`),`error`);return}j(n=>n?{...n,[e]:t}:null)},[s,d,o,i]),br=async(e,t,n)=>{if(!t){o(i(`settings.toast.enterCameraUrl`),`error`);return}Ut(t=>({...t,[e]:!0})),Vt(t=>({...t,[e]:null}));try{let r=await Z.testExternalCamera(e,t,n);Vt(t=>({...t,[e]:r})),r.success?o(r.coalesced?i(`settings.toast.cameraConnectedCoalesced`,{resolution:r.resolution||``}):i(`settings.toast.cameraConnected`,{resolution:r.resolution||``}),`success`):o(r.error||i(`settings.toast.connectionFailed`),`error`)}catch(t){let n=t instanceof Error?t.message:i(`settings.toast.testFailed`);Vt(t=>({...t,[e]:{success:!1,error:n}})),o(n,`error`)}finally{Ut(t=>({...t,[e]:!1}))}},[xr,Sr]=(0,y.useState)({}),Cr=(0,y.useRef)({}),wr=(0,y.useRef)(new Set),[Tr,Er]=(0,y.useState)({}),Dr=(0,y.useRef)({}),Or=(0,y.useRef)(new Set);(0,y.useEffect)(()=>{if(sn){let e={},t={};sn.forEach(n=>{n.external_camera_url&&!wr.current.has(n.id)&&(e[n.id]=n.external_camera_url,wr.current.add(n.id)),n.external_camera_snapshot_url&&!Or.current.has(n.id)&&(t[n.id]=n.external_camera_snapshot_url,Or.current.add(n.id))}),Object.keys(e).length>0&&Sr(t=>({...t,...e})),Object.keys(t).length>0&&Er(e=>({...e,...t}))}},[sn]);let kr=(e,t)=>{Sr(n=>({...n,[e]:t})),Cr.current[e]&&clearTimeout(Cr.current[e]),Cr.current[e]=setTimeout(()=>{vr.mutate({id:e,data:{external_camera_url:t||null}})},800)},Ar=(e,t)=>{Er(n=>({...n,[e]:t})),Dr.current[e]&&clearTimeout(Dr.current[e]),Dr.current[e]=setTimeout(()=>{vr.mutate({id:e,data:{external_camera_snapshot_url:t||null}})},800)},jr=(e,t)=>{let n={};t.type!==void 0&&(n.external_camera_type=t.type||null),t.enabled!==void 0&&(n.external_camera_enabled=t.enabled),t.rotation!==void 0&&(n.camera_rotation=t.rotation),vr.mutate({id:e,data:n})};if(Kt||!A)return(0,G.jsx)(`div`,{className:`p-4 md:p-8 flex justify-center`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})});let Mr=TGe().map(e=>({...e,label:i(e.labelKey,e.labelFallback??e.labelKey)})),Nr=ye.trim().toLowerCase(),Pr=Nr?Mr.filter(e=>e.label.toLowerCase().includes(Nr)||e.keywords.toLowerCase().includes(Nr)).slice(0,8):[],Fr=e=>{Le(e.tab),e.subTab&&Pe(e.subTab),be(``),setTimeout(()=>{let t=document.getElementById(e.anchor);t&&(t.scrollIntoView({behavior:`smooth`,block:`start`}),t.classList.add(`ring-2`,`ring-bambu-green`),setTimeout(()=>t.classList.remove(`ring-2`,`ring-bambu-green`),1500))},50)},Ir=(A?.docker_compose_dir??``).trim()||(Pn?.compose_dir_detected??``),Lr=Ir?`cd ${/\s/.test(Ir)?`"${Ir}"`:Ir} && docker compose pull && docker compose up -d`:`docker compose pull && docker compose up -d`;return(0,G.jsx)(Id,{density:`dense`,children:(0,G.jsxs)(`div`,{className:`p-4 md:p-8`,children:[(0,G.jsxs)(`div`,{className:`mb-4 flex flex-col sm:flex-row sm:items-center sm:justify-between gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(nu,{className:`w-7 h-7 text-bambu-green`}),i(`settings.title`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:i(`settings.configureBambuddy`)})]}),(0,G.jsxs)(`div`,{className:`relative sm:w-72`,children:[(0,G.jsx)(Zl,{className:`w-4 h-4 text-bambu-gray absolute left-3 top-1/2 -translate-y-1/2 pointer-events-none`}),(0,G.jsx)(`input`,{type:`text`,value:ye,onChange:e=>be(e.target.value),placeholder:i(`settings.searchPlaceholder`,`Search settings…`),className:`w-full pl-9 pr-8 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`}),ye&&(0,G.jsx)(`button`,{onClick:()=>be(``),className:`absolute right-2 top-1/2 -translate-y-1/2 p-1 text-bambu-gray hover:text-white`,"aria-label":`Clear`,children:(0,G.jsx)(td,{className:`w-3.5 h-3.5`})}),Pr.length>0&&(0,G.jsx)(`div`,{className:`absolute top-full left-0 right-0 mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl z-30 overflow-hidden`,children:Pr.map(e=>(0,G.jsxs)(`button`,{onClick:()=>Fr(e),className:`w-full px-3 py-2 text-left hover:bg-bambu-dark-tertiary transition-colors border-b border-bambu-dark-tertiary last:border-b-0`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:e.label}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[i(`settings.tabs.${e.tab===`virtual-printer`?`virtualPrinter`:e.tab===`failure-detection`?`failureDetection`:e.tab}`),e.subTab?` › ${i(`settings.tabs.${e.subTab}`,e.subTab)}`:``]})]},e.anchor))}),Nr&&Pr.length===0&&(0,G.jsx)(`div`,{className:`absolute top-full left-0 right-0 mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl z-30 p-3`,children:(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray italic`,children:i(`settings.noSearchResults`,`No matching settings.`)})})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-col lg:flex-row gap-4 lg:gap-6`,children:[(0,G.jsxs)(`nav`,{className:`flex flex-wrap gap-1 border-b border-bambu-dark-tertiary lg:flex-col lg:flex-nowrap lg:gap-0 lg:border-b-0 lg:border-r lg:w-48 lg:flex-shrink-0 lg:self-start lg:sticky lg:top-4`,children:[(0,G.jsxs)(`button`,{onClick:()=>Le(`general`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`general`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(nu,{className:`w-4 h-4`}),i(`settings.tabs.general`)]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`plugs`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`plugs`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Nl,{className:`w-4 h-4`}),i(`settings.tabs.smartPlugs`),Zt&&Zt.length>0&&(0,G.jsx)(`span`,{className:`text-xs bg-bambu-dark-tertiary px-1.5 py-0.5 rounded-full`,children:Zt.length})]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`sensors`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`sensors`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(wc,{className:`w-4 h-4`}),i(`settings.tabs.sensors`),(cn?.length??0)+(ln?.length??0)>0&&(0,G.jsx)(`span`,{className:`text-xs bg-bambu-dark-tertiary px-1.5 py-0.5 rounded-full`,children:(cn?.length??0)+(ln?.length??0)})]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`notifications`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`notifications`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(qo,{className:`w-4 h-4`}),i(`settings.tabs.notifications`),tn&&tn.length>0&&(0,G.jsx)(`span`,{className:`text-xs bg-bambu-dark-tertiary px-1.5 py-0.5 rounded-full`,children:tn.length})]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`queue`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`queue`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Zc,{className:`w-4 h-4`}),i(`settings.tabs.queue`,`Workflow`)]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`filament`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`filament`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Us,{className:`w-4 h-4`}),i(`settings.tabs.filament`)]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`network`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`network`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Zu,{className:`w-4 h-4`}),i(`settings.tabs.network`),(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full ${zn?.enabled?`bg-green-400`:`bg-gray-500`}`})]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`apikeys`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`apikeys`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Gc,{className:`w-4 h-4`}),i(`settings.tabs.apiKeys`),nn&&nn.length>0&&(0,G.jsx)(`span`,{className:`text-xs bg-bambu-dark-tertiary px-1.5 py-0.5 rounded-full`,children:nn.length})]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`virtual-printer`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`virtual-printer`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Ll,{className:`w-4 h-4`}),i(`settings.tabs.virtualPrinter`),(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full ${vn?`bg-green-400`:`bg-gray-500`}`})]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`spoolbuddy`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`spoolbuddy`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(ql,{className:`w-4 h-4`}),i(`settings.tabs.spoolbuddy`),bn>0&&(0,G.jsx)(`span`,{className:`text-xs bg-bambu-dark-tertiary px-1.5 py-0.5 rounded-full`,children:bn}),(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full ${xn?`bg-green-400`:`bg-gray-500`}`})]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`failure-detection`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`failure-detection`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Jl,{className:`w-4 h-4`}),i(`settings.tabs.failureDetection`),(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full ${Cn?`bg-green-400`:`bg-gray-500`}`})]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`users`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`users`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Hu,{className:`w-4 h-4`}),i(`settings.tabs.users`),s&&(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full bg-green-400`})]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`backup`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`backup`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Ws,{className:`w-4 h-4`}),i(`settings.tabs.backup`),(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full ${Vn?.is_authenticated&&Bn?.configured&&Bn?.enabled||Gt?.local_backup_enabled?`bg-green-400`:`bg-gray-500`}`})]})]}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[je===`general`&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`a`,{href:Lf(mn,`app-settings`),target:`_blank`,rel:`noopener noreferrer`,className:`group block mb-4 lg:mb-6 rounded-xl border border-bambu-green/30 bg-gradient-to-br from-bambu-green/15 via-bambu-green/5 to-transparent hover:border-bambu-green/50 hover:from-bambu-green/20 transition-colors`,children:(0,G.jsxs)(`div`,{className:`flex flex-col md:flex-row items-start md:items-center gap-4 p-4 md:p-5`,children:[(0,G.jsx)(`div`,{className:`p-3 rounded-lg bg-bambu-green/20 text-bambu-green flex-shrink-0`,children:mn===`business`?(0,G.jsx)(Qo,{className:`w-6 h-6`}):(0,G.jsx)(Lc,{className:`w-6 h-6`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-base font-semibold text-white`,children:mn===`business`?i(`sponsors.businessTitle`,`Bambuddy for business`):i(`sponsors.sectionTitle`,`Independent & community-funded`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-0.5`,children:mn===`business`?i(`sponsors.businessTagline`,`You're running {{count}} printers. Priority support, commercial licensing and invoicing are available for teams and print farms.`,{count:sn?.length??0}):i(`sponsors.tagline`,`Bambuddy is free and stays that way because people choose to support it. No VC, no cloud lock-in.`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 px-4 py-2 rounded-lg bg-bambu-green/20 text-bambu-green group-hover:bg-bambu-green/30 text-sm font-medium whitespace-nowrap self-start md:self-auto`,children:[mn===`business`?i(`sponsors.businessCta`,`Bambuddy for business`):i(`sponsors.viewSupporters`,`View supporters`),(0,G.jsx)(nc,{className:`w-4 h-4`})]})]})}),(0,G.jsxs)(`div`,{className:`flex flex-col lg:flex-row gap-4 lg:gap-6`,children:[(0,G.jsxs)(`div`,{className:`space-y-3 flex-1 lg:max-w-xl`,children:[(0,G.jsxs)(Ld,{id:`card-general`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.general`)})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[(0,G.jsx)(kc,{className:`w-4 h-4 inline mr-1`}),i(`settings.language`)]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`select`,{value:a.language,onChange:e=>{let t=e.target.value;if(s&&!d(`settings:update`)){o(i(`settings.toast.noPermissionUpdate`),`error`);return}a.changeLanguage(t),_r.mutate({language:t})},className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:kt.map(e=>(0,G.jsxs)(`option`,{value:e.code,children:[e.nativeName,` (`,e.name,`)`]},e.code))}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.languageDescription`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.defaultView`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`select`,{value:De,onChange:e=>Wt(e.target.value),className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:cm.map(e=>(0,G.jsx)(`option`,{value:e.to,children:i(e.labelKey)},e.id))}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.defaultViewDescription`)})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.dateFormat`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:A.date_format||`system`,onChange:e=>yr(`date_format`,e.target.value),className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:[(0,G.jsx)(`option`,{value:`system`,children:i(`settings.systemDefault`)}),(0,G.jsx)(`option`,{value:`us`,children:i(`settings.dateFormatUs`)}),(0,G.jsx)(`option`,{value:`eu`,children:i(`settings.dateFormatEu`)}),(0,G.jsx)(`option`,{value:`iso`,children:i(`settings.dateFormatIso`)})]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.timeFormat`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:A.time_format||`system`,onChange:e=>yr(`time_format`,e.target.value),className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:[(0,G.jsx)(`option`,{value:`system`,children:i(`settings.systemDefault`)}),(0,G.jsx)(`option`,{value:`12h`,children:i(`settings.timeFormat12`)}),(0,G.jsx)(`option`,{value:`24h`,children:i(`settings.timeFormat24`)})]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.defaultPrinter`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:A.default_printer_id??``,onChange:e=>yr(`default_printer_id`,e.target.value?Number(e.target.value):null),className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:[(0,G.jsx)(`option`,{value:``,children:i(`settings.noDefaultPrinter`)}),sn?.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.defaultPrinterDescription`)})]})]})]}),(0,G.jsxs)(Ld,{id:`card-appearance`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Cl,{className:`w-5 h-5`}),i(`settings.appearance`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-2`,children:[(0,G.jsxs)(`label`,{className:`text-sm text-bambu-gray`,children:[i(`settings.theme`),`:`]}),(0,G.jsx)(`div`,{className:`flex gap-1`,children:[{id:`dark`,label:i(`settings.themeDark`)},{id:`light`,label:i(`settings.themeLight`)},{id:`system`,label:i(`settings.themeSystem`)}].map(({id:e,label:t})=>(0,G.jsx)(`button`,{onClick:()=>{x(e),o(i(`settings.toast.settingsSaved`),`success`)},className:`px-3 py-1 text-xs rounded-lg border transition-colors ${f===e?`border-bambu-green bg-bambu-green/10 text-bambu-green`:`border-gray-300 dark:border-bambu-dark-tertiary text-gray-500 dark:text-bambu-gray hover:text-gray-900 dark:hover:text-white cursor-pointer`}`,children:t},e))})]}),(0,G.jsxs)(`div`,{className:`space-y-3 p-4 rounded-lg border ${p===`dark`?`border-bambu-green bg-bambu-green/5`:`border-bambu-dark-tertiary`}`,children:[(0,G.jsxs)(`h3`,{className:`text-sm font-medium text-white flex items-center gap-2`,children:[i(`settings.darkMode`),p===`dark`&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-green`,children:i(`settings.active`)})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-3 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.background`)}),(0,G.jsxs)(`select`,{value:h,onChange:e=>{C(e.target.value),o(i(`settings.toast.settingsSaved`),`success`)},className:`w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`neutral`,children:i(`settings.bgNeutral`)}),(0,G.jsx)(`option`,{value:`warm`,children:i(`settings.bgWarm`)}),(0,G.jsx)(`option`,{value:`cool`,children:i(`settings.bgCool`)}),(0,G.jsx)(`option`,{value:`oled`,children:i(`settings.bgOled`)}),(0,G.jsx)(`option`,{value:`slate`,children:i(`settings.bgSlate`)}),(0,G.jsx)(`option`,{value:`forest`,children:i(`settings.bgForest`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.accent`)}),(0,G.jsxs)(`select`,{value:g,onChange:e=>{w(e.target.value),o(i(`settings.toast.settingsSaved`),`success`)},className:`w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`green`,children:i(`settings.accentGreen`)}),(0,G.jsx)(`option`,{value:`teal`,children:i(`settings.accentTeal`)}),(0,G.jsx)(`option`,{value:`blue`,children:i(`settings.accentBlue`)}),(0,G.jsx)(`option`,{value:`orange`,children:i(`settings.accentOrange`)}),(0,G.jsx)(`option`,{value:`purple`,children:i(`settings.accentPurple`)}),(0,G.jsx)(`option`,{value:`red`,children:i(`settings.accentRed`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.style`)}),(0,G.jsxs)(`select`,{value:m,onChange:e=>{S(e.target.value),o(i(`settings.toast.settingsSaved`),`success`)},className:`w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`classic`,children:i(`settings.styleClassic`)}),(0,G.jsx)(`option`,{value:`glow`,children:i(`settings.styleGlow`)}),(0,G.jsx)(`option`,{value:`vibrant`,children:i(`settings.styleVibrant`)})]})]})]})]}),(0,G.jsxs)(`div`,{className:`space-y-3 p-4 rounded-lg border ${p===`light`?`border-bambu-green bg-bambu-green/5`:`border-bambu-dark-tertiary`}`,children:[(0,G.jsxs)(`h3`,{className:`text-sm font-medium text-white flex items-center gap-2`,children:[i(`settings.lightMode`),p===`light`&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-green`,children:i(`settings.active`)})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-3 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.background`)}),(0,G.jsxs)(`select`,{value:v,onChange:e=>{E(e.target.value),o(i(`settings.toast.settingsSaved`),`success`)},className:`w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`neutral`,children:i(`settings.bgNeutral`)}),(0,G.jsx)(`option`,{value:`warm`,children:i(`settings.bgWarm`)}),(0,G.jsx)(`option`,{value:`cool`,children:i(`settings.bgCool`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.accent`)}),(0,G.jsxs)(`select`,{value:b,onChange:e=>{D(e.target.value),o(i(`settings.toast.settingsSaved`),`success`)},className:`w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`green`,children:i(`settings.accentGreen`)}),(0,G.jsx)(`option`,{value:`teal`,children:i(`settings.accentTeal`)}),(0,G.jsx)(`option`,{value:`blue`,children:i(`settings.accentBlue`)}),(0,G.jsx)(`option`,{value:`orange`,children:i(`settings.accentOrange`)}),(0,G.jsx)(`option`,{value:`purple`,children:i(`settings.accentPurple`)}),(0,G.jsx)(`option`,{value:`red`,children:i(`settings.accentRed`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.style`)}),(0,G.jsxs)(`select`,{value:_,onChange:e=>{T(e.target.value),o(i(`settings.toast.settingsSaved`),`success`)},className:`w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`classic`,children:i(`settings.styleClassic`)}),(0,G.jsx)(`option`,{value:`glow`,children:i(`settings.styleGlow`)}),(0,G.jsx)(`option`,{value:`vibrant`,children:i(`settings.styleVibrant`)})]})]})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.themeToggleHint`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.progressInTitle`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.progressInTitleDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:O,onChange:e=>{k(e.target.checked),o(i(`settings.toast.settingsSaved`),`success`)},className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]})]})]}),(0,G.jsxs)(Ld,{id:`card-archive`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.archiveSettings`)})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.autoArchivePrints`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.autoArchiveDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.auto_archive,onChange:e=>yr(`auto_archive`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.saveThumbnails`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.saveThumbnailsDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.save_thumbnails,onChange:e=>yr(`save_thumbnails`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.captureFinishPhoto`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.captureFinishPhotoDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.capture_finish_photo,onChange:e=>yr(`capture_finish_photo`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),A.capture_finish_photo&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between pl-4 border-l-2 border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.finishPhotoRestorePlate`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.finishPhotoRestorePlateDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.finish_photo_restore_plate??!0,onChange:e=>yr(`finish_photo_restore_plate`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),A.capture_finish_photo&&wn&&!wn.installed&&(0,G.jsxs)(`div`,{className:`flex items-start gap-2 p-3 bg-yellow-500/10 border border-yellow-500/30 rounded-lg`,children:[(0,G.jsx)(Iu,{className:`w-5 h-5 text-yellow-500 flex-shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{className:`text-sm`,children:[(0,G.jsx)(`p`,{className:`text-yellow-500 font-medium`,children:i(`settings.ffmpegNotInstalled`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:i(`settings.ffmpegRequired`)})]})]}),An&&jn&&(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary pt-3 mt-3 space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`archiveAutoPurge.enableLabel`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`archiveAutoPurge.enableDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:jn.enabled,onChange:e=>Nn({enabled:e.target.checked}),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`archiveAutoPurge.ageLabel`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,min:7,max:3650,disabled:!jn.enabled,value:jn.days,onChange:e=>Nn({days:Math.max(7,Math.min(3650,parseInt(e.target.value||`0`,10)||0))}),className:`w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none disabled:opacity-50`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`archiveAutoPurge.days`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`archiveAutoPurge.ageDescription`)})]}),(0,G.jsxs)(`label`,{className:`flex items-start gap-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,disabled:!jn.enabled,checked:jn.purge_stats,onChange:e=>Nn({purge_stats:e.target.checked}),className:`mt-0.5 shrink-0 disabled:opacity-50`}),(0,G.jsxs)(`span`,{className:`text-sm`,children:[(0,G.jsx)(`span`,{className:`text-white block`,children:i(`archiveAutoPurge.purgeStatsLabel`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray block mt-0.5`,children:i(`archiveAutoPurge.purgeStatsDescription`)})]})]})]})]})]})]}),(0,G.jsxs)(`div`,{className:`space-y-3 flex-1 lg:max-w-md`,children:[(0,G.jsxs)(Ld,{id:`card-camera`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Wu,{className:`w-5 h-5 text-bambu-green`}),i(`settings.camera`)]})}),(0,G.jsx)(zd,{className:`space-y-3`,children:(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white mb-2`,children:i(`settings.externalCameras`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-3`,children:i(`settings.externalCamerasDescription`)}),sn&&sn.length>0?(0,G.jsx)(`div`,{className:`space-y-3`,children:sn.map(e=>(0,G.jsxs)(`div`,{className:`p-3 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`span`,{className:`text-white font-medium text-sm`,children:e.name}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:e.external_camera_enabled,onChange:t=>jr(e.id,{enabled:t.target.checked}),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-9 h-5 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:border-gray-300 after:border after:rounded-full after:h-4 after:w-4 after:transition-all peer-checked:bg-bambu-green`})]})]}),e.external_camera_enabled&&(0,G.jsxs)(`div`,{className:`space-y-2 mt-2`,children:[(0,G.jsx)(`input`,{type:`text`,placeholder:e.external_camera_type===`usb`?i(`settings.cameraPlaceholderUsb`):i(`settings.cameraPlaceholderUrl`),value:xr[e.id]??e.external_camera_url??``,onChange:t=>kr(e.id,t.target.value),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(`select`,{value:e.external_camera_type||`mjpeg`,onChange:t=>jr(e.id,{type:t.target.value}),className:`flex-1 px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`mjpeg`,children:i(`settings.cameraTypeMjpeg`)}),(0,G.jsx)(`option`,{value:`rtsp`,children:i(`settings.cameraTypeRtsp`)}),(0,G.jsx)(`option`,{value:`snapshot`,children:i(`settings.cameraTypeSnapshot`)}),(0,G.jsx)(`option`,{value:`usb`,children:i(`settings.cameraTypeUsb`)})]}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>br(e.id,xr[e.id]??e.external_camera_url??``,e.external_camera_type||`mjpeg`),disabled:Ht[e.id]||!(xr[e.id]??e.external_camera_url),children:Ht[e.id]?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):i(`settings.test`)})]}),Bt[e.id]&&(0,G.jsx)(`div`,{className:`text-xs flex items-center gap-1 ${Bt[e.id]?.success?`text-green-500`:`text-red-500`}`,children:Bt[e.id]?.success?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(xs,{className:`w-3 h-3`}),i(`settings.connected`),Bt[e.id]?.resolution&&` (${Bt[e.id]?.resolution})`]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ds,{className:`w-3 h-3`}),Bt[e.id]?.error||i(`settings.toast.connectionFailed`)]})}),(e.external_camera_type===`mjpeg`||e.external_camera_type===`rtsp`||e.external_camera_type===`usb`)&&(0,G.jsxs)(`div`,{className:`space-y-1`,children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray`,children:i(`settings.cameraSnapshotUrl`,`Snapshot URL (optional)`)}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`input`,{type:`text`,placeholder:i(`settings.cameraSnapshotUrlPlaceholder`,`http://192.168.1.61:1984/api/frame.jpeg?src=printer`),value:Tr[e.id]??e.external_camera_snapshot_url??``,onChange:t=>Ar(e.id,t.target.value),className:`flex-1 px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>br(e.id,Tr[e.id]??e.external_camera_snapshot_url??``,`snapshot`),disabled:Ht[e.id]||!(Tr[e.id]??e.external_camera_snapshot_url),children:Ht[e.id]?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):i(`settings.test`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray opacity-75`,children:i(`settings.cameraSnapshotUrlHelp`,`Single-frame URL used for notification thumbnails, finish photos, timelapse and plate detection. Leave blank to capture from the live stream above. Useful for go2rtc (/api/frame.jpeg) and IP cameras with a dedicated snapshot endpoint.`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray`,children:i(`settings.cameraRotation`)}),(0,G.jsxs)(`select`,{value:e.camera_rotation||0,onChange:t=>jr(e.id,{rotation:parseInt(t.target.value)}),className:`px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-xs focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:0,children:`0°`}),(0,G.jsx)(`option`,{value:90,children:`90°`}),(0,G.jsx)(`option`,{value:180,children:`180°`}),(0,G.jsx)(`option`,{value:270,children:`270°`})]})]})]})]},e.id))}):(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray italic`,children:i(`settings.noPrintersConfigured`)})]})})]}),(0,G.jsxs)(Ld,{id:`card-cost`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.costTracking`)})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.currency`)}),(0,G.jsx)(`select`,{value:A.currency,onChange:e=>yr(`currency`,e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:Ff.map(e=>(0,G.jsx)(`option`,{value:e.code,children:e.label},e.code))})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.defaultFilamentCost`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`span`,{className:`absolute left-3 top-1/2 -translate-y-1/2 text-bambu-gray text-sm pointer-events-none`,children:Pf(A.currency)}),(0,G.jsx)(`input`,{type:`number`,step:`0.01`,min:`0`,value:A.default_filament_cost,onChange:e=>yr(`default_filament_cost`,parseFloat(e.target.value)||0),style:{paddingLeft:`${Math.max(2,Pf(A.currency).length*.6+1)}rem`},className:`w-full pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.electricityCost`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`span`,{className:`absolute left-3 top-1/2 -translate-y-1/2 text-bambu-gray text-sm pointer-events-none`,children:Pf(A.currency)}),(0,G.jsx)(`input`,{type:`number`,step:`0.001`,min:`0`,value:A.energy_cost_per_kwh,onChange:e=>yr(`energy_cost_per_kwh`,parseFloat(e.target.value)||0),style:{paddingLeft:`${Math.max(2,Pf(A.currency).length*.6+1)}rem`},className:`w-full pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.energyDisplayMode`)}),(0,G.jsxs)(`select`,{value:A.energy_tracking_mode||`total`,onChange:e=>yr(`energy_tracking_mode`,e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`print`,children:i(`settings.printsOnly`)}),(0,G.jsx)(`option`,{value:`total`,children:i(`settings.totalConsumption`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:A.energy_tracking_mode===`print`?i(`settings.energyModePrintDescription`):i(`settings.energyModeTotalDescription`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.billingEnabled`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.billingEnabledDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.billing_enabled??!1,onChange:e=>yr(`billing_enabled`,e.target.checked),className:`peer sr-only`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary rounded-full peer-checked:bg-bambu-green peer-checked:after:translate-x-5 after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:border after:rounded-full after:h-5 after:w-5 after:transition-all`})]})]}),A.billing_enabled&&(0,G.jsxs)(`div`,{className:`mt-4 flex items-center justify-between gap-4 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark px-4 py-3`,children:[(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.printerKillSwitch`,`Unauthorized print kill switch`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.printerKillSwitchDescription`,`Immediately stop prints that start without authorization.`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.printer_kill_switch_enabled??!1,onChange:e=>yr(`printer_kill_switch_enabled`,e.target.checked),className:`peer sr-only`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary rounded-full peer-checked:bg-bambu-green peer-checked:after:translate-x-5 after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:border after:rounded-full after:h-5 after:w-5 after:transition-all`})]})]}),A.billing_enabled&&(0,G.jsxs)(`div`,{className:`mt-4 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark p-4`,children:[(0,G.jsx)(`div`,{className:`mb-3`,children:(0,G.jsxs)(`h4`,{className:`text-base font-medium text-white flex items-center gap-2`,children:[(0,G.jsx)(as,{className:`w-4 h-4 text-bambu-green`}),i(`settings.financeBudgetReset`,`Finance Monthly Budget Reset`)]})}),(0,G.jsxs)(`div`,{className:`flex gap-4`,children:[(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.financeBudgetResetDay`,`Reset Day`)}),(0,G.jsx)(`input`,{type:`number`,min:1,max:31,value:A.finance_budget_reset_day??1,onChange:e=>yr(`finance_budget_reset_day`,Math.max(1,Math.min(31,parseInt(e.target.value,10)||1))),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.financeBudgetResetDayHelp`,`For short months, reset uses the last day of the month.`)})]}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.financeBudgetResetTimezone`,`Reset timezone`)}),(0,G.jsxs)(`select`,{value:A.finance_budget_reset_timezone??`UTC`,onChange:e=>yr(`finance_budget_reset_timezone`,e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`,children:[(0,G.jsx)(`option`,{value:`UTC`,children:`UTC`}),(0,G.jsx)(`option`,{value:`Europe/Berlin`,children:`Europe/Berlin`}),(0,G.jsx)(`option`,{value:`Europe/Vienna`,children:`Europe/Vienna`}),(0,G.jsx)(`option`,{value:`Europe/Zurich`,children:`Europe/Zurich`}),(0,G.jsx)(`option`,{value:`America/New_York`,children:`America/New_York`}),(0,G.jsx)(`option`,{value:`America/Chicago`,children:`America/Chicago`}),(0,G.jsx)(`option`,{value:`America/Denver`,children:`America/Denver`}),(0,G.jsx)(`option`,{value:`America/Los_Angeles`,children:`America/Los_Angeles`}),(0,G.jsx)(`option`,{value:`Asia/Tokyo`,children:`Asia/Tokyo`}),(0,G.jsx)(`option`,{value:`Asia/Singapore`,children:`Asia/Singapore`}),(0,G.jsx)(`option`,{value:`Australia/Sydney`,children:`Australia/Sydney`})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.financeBudgetResetTimezoneHelp`,`Budget window start is calculated in this timezone.`)})]})]})]}),A.billing_enabled&&l&&(0,G.jsxs)(`div`,{className:`mt-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>we(!0),disabled:Te,children:Te?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 mr-2 animate-spin`}),i(`settings.rebuildLedgerInProgress`,`Starting...`)]}):i(`settings.rebuildLedger`,`Rebuild wallet ledger`)}),Ce&&(0,G.jsx)(rf,{title:i(`settings.rebuildLedgerConfirmTitle`,`Rebuild wallet ledger?`),message:i(`settings.rebuildLedgerConfirmMessage`,`This will rebuild the wallet ledger to repair historical balance values. Run this only if you know what you are doing.`),confirmText:i(`common.run`,`Run`),cancelText:i(`common.cancel`,`Cancel`),isLoading:Te,loadingText:i(`common.running`,`Running`),variant:`warning`,onCancel:()=>we(!1),onConfirm:async()=>{Ee(!0);try{await Z.rebuildBalanceLedger(),o(i(`settings.rebuildLedgerStarted`,`Ledger rebuild started`),`success`),we(!1)}catch(e){o(e.message||`Failed to start ledger rebuild`,`error`)}finally{Ee(!1)}}})]})]})]})]}),(0,G.jsxs)(Ld,{id:`card-filemanager`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(dc,{className:`w-5 h-5 text-bambu-green`}),i(`settings.fileManager`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.createArchiveEntry`)}),(0,G.jsxs)(`select`,{value:A.library_archive_mode??`ask`,onChange:e=>yr(`library_archive_mode`,e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`always`,children:i(`settings.archiveMode.always`)}),(0,G.jsx)(`option`,{value:`never`,children:i(`settings.archiveMode.never`)}),(0,G.jsx)(`option`,{value:`ask`,children:i(`settings.archiveMode.ask`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.createArchiveEntryDescription`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.lowDiskSpaceWarning`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,min:`0.5`,max:`100`,step:`0.5`,value:A.library_disk_warning_gb??5,onChange:e=>yr(`library_disk_warning_gb`,parseFloat(e.target.value)||5),className:`w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`GB`})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.lowDiskSpaceDescription`)})]}),En&&Dn&&(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary pt-3 mt-3 space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`libraryAutoPurge.enableLabel`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`libraryAutoPurge.enableDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Dn.auto_purge_enabled,onChange:e=>kn({auto_purge_enabled:e.target.checked}),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`libraryAutoPurge.ageLabel`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,min:7,max:3650,disabled:!Dn.auto_purge_enabled,value:Dn.auto_purge_days,onChange:e=>kn({auto_purge_days:Math.max(7,Math.min(3650,parseInt(e.target.value||`0`,10)||0))}),className:`w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none disabled:opacity-50`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`libraryAutoPurge.days`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`libraryAutoPurge.ageDescription`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 text-sm text-white cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,disabled:!Dn.auto_purge_enabled,checked:Dn.auto_purge_include_never_printed,onChange:e=>kn({auto_purge_include_never_printed:e.target.checked}),className:`rounded border-gray-300 disabled:opacity-50`}),i(`libraryAutoPurge.includeNeverPrinted`)]})]})]})]}),(0,G.jsxs)(Ld,{id:`card-data`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.dataManagement`)})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.clearNotificationLogs`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.clearNotificationLogsDescription`)})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>et(!0),children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),i(`common.clear`)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.resetUiPreferences`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.resetUiPreferencesDescription`)})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>nt(!0),children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),i(`settings.reset`)]})]}),(0,G.jsxs)(`div`,{className:`pt-4 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.storageUsage`,`Storage Usage`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.storageUsageDescription`,`Breakdown of data usage by category`)})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:Xt,disabled:Yt||ht,children:[(0,G.jsx)(Vl,{className:`w-4 h-4 ${Yt||ht?`animate-spin`:``}`}),i(`common.refresh`,`Refresh`)]})]}),(0,G.jsx)(`div`,{className:`mt-3`,children:Jt?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),i(`common.loading`,`Loading`)]}):qt?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`w-full h-3 bg-bambu-dark rounded-full overflow-hidden flex`,children:qt.categories.filter(e=>e.bytes>0).map((e,t)=>(0,G.jsx)(`div`,{className:`${LGe(e.key,t)} h-full`,style:{width:`${e.percent_of_total}%`},title:`${e.label}: ${e.formatted}`},e.key))}),(0,G.jsx)(`div`,{className:`mt-3 flex flex-wrap gap-3`,children:qt.categories.filter(e=>e.bytes>0).map((e,t)=>(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-xs`,children:[(0,G.jsx)(`span`,{className:`w-3 h-3 rounded-full ${LGe(e.key,t)}`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:e.label}),(0,G.jsx)(`span`,{className:`text-white`,children:e.formatted}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[`(`,e.percent_of_total.toFixed(1),`%)`]})]},e.key))}),(0,G.jsxs)(`div`,{className:`mt-2 text-xs text-bambu-gray`,children:[i(`settings.storageUsageTotal`,`Total`),`: `,(0,G.jsx)(`span`,{className:`text-white`,children:qt.total_formatted}),qt.scan_errors>0&&(0,G.jsxs)(`span`,{className:`ml-2 text-amber-700 dark:text-amber-400`,children:[i(`settings.storageUsageErrors`,`Scan errors`),`: `,qt.scan_errors]})]}),qt.other_breakdown?.length>0&&(0,G.jsxs)(`div`,{className:`mt-4`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:i(`settings.storageUsageOtherBreakdown`,`Other breakdown`)}),(0,G.jsx)(`div`,{className:`space-y-2`,children:qt.other_breakdown.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-xs`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-white`,children:e.label}),(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded-full border ${e.kind===`system`?`border-slate-500 text-slate-300`:`border-bambu-green text-bambu-green`}`,children:e.kind===`system`?i(`settings.storageUsageSystem`,`System`):i(`settings.storageUsageData`,`Data`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray`,children:[(0,G.jsx)(`span`,{className:`text-white`,children:e.formatted}),(0,G.jsxs)(`span`,{children:[`(`,e.percent_of_total.toFixed(1),`%)`]})]})]},`${e.bucket}-${e.kind}`))})]})]}):(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.storageUsageUnavailable`,`Storage usage data is unavailable`)})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between pt-4 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.backupRestore`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.backupRestoreDescription`)})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>Le(`backup`),children:[(0,G.jsx)(Ws,{className:`w-4 h-4`}),i(`settings.goToBackup`)]})]})]})]})]}),(0,G.jsxs)(`div`,{className:`space-y-3 flex-1 lg:max-w-sm`,children:[(0,G.jsxs)(Ld,{id:`card-updates`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.updates`)})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-xs font-medium text-bambu-gray uppercase tracking-wider`,children:i(`settings.printerFirmware`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.checkPrinterFirmware`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.checkFirmwareDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.check_printer_firmware??!0,onChange:e=>yr(`check_printer_firmware`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsx)(`div`,{className:`border-t border-bambu-dark-tertiary pt-4`,children:(0,G.jsx)(`p`,{className:`text-xs font-medium text-bambu-gray uppercase tracking-wider mb-4`,children:i(`settings.bambuddySoftware`)})}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.checkForUpdatesLabel`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.autoCheckDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.check_updates,onChange:e=>yr(`check_updates`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between ${A.check_updates?``:`opacity-50`}`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.includeBetaUpdates`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.includeBetaUpdatesDesc`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.include_beta_updates??!1,onChange:e=>yr(`include_beta_updates`,e.target.checked),disabled:!A.check_updates,className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.currentVersion`)}),(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[`v`,Tn?.version||`...`]})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>Fn(),disabled:In,children:[In?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Vl,{className:`w-4 h-4`}),i(`settings.checkNow`)]})]}),Pn?.update_available?(0,G.jsxs)(`div`,{className:`mt-4 p-3 bg-bambu-green/10 border border-bambu-green/30 rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`p`,{className:`text-bambu-green font-medium`,children:[`Update available: v`,Pn.latest_version]}),Pn.release_name&&Pn.release_name!==Pn.latest_version&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:Pn.release_name})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[Pn.release_notes&&(0,G.jsx)(`button`,{onClick:()=>ot(!0),className:`text-bambu-gray hover:text-white transition-colors text-sm underline`,children:i(`settings.releaseNotes`)}),Pn.release_url&&(0,G.jsx)(`a`,{href:Pn.release_url,target:`_blank`,rel:`noopener noreferrer`,className:`text-bambu-gray hover:text-white transition-colors`,title:i(`settings.viewReleaseOnGitHub`),children:(0,G.jsx)(nc,{className:`w-4 h-4`})})]})]}),Ln?.status===`downloading`||Ln?.status===`installing`?(0,G.jsxs)(`div`,{className:`mt-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),(0,G.jsx)(`span`,{children:Ln.message})]}),(0,G.jsx)(`div`,{className:`mt-2 w-full bg-bambu-dark-tertiary rounded-full h-2`,children:(0,G.jsx)(`div`,{className:`bg-bambu-green h-2 rounded-full transition-all duration-300`,style:{width:`${Ln.progress}%`}})})]}):Ln?.status===`complete`?(0,G.jsx)(`div`,{className:`mt-3 p-2 bg-bambu-green/20 rounded text-sm text-bambu-green`,children:Ln.message}):Ln?.status===`error`?(0,G.jsx)(`div`,{className:`mt-3 p-2 bg-red-100 dark:bg-red-500/20 rounded text-sm text-red-700 dark:text-red-400`,children:Ln.error||Ln.message}):Pn?.is_ha_addon?(0,G.jsx)(`div`,{className:`mt-3 p-3 bg-bambu-dark-tertiary rounded-lg`,children:(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.updateViaHomeAssistant`)})}):Pn?.is_docker?(0,G.jsxs)(`div`,{className:`mt-3 p-3 bg-bambu-dark-tertiary rounded-lg`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-2`,children:i(`settings.updateViaDocker`)}),(0,G.jsxs)(`div`,{className:`flex items-start gap-1`,children:[(0,G.jsx)(`code`,{className:`flex-1 block text-xs bg-bambu-dark p-2 rounded text-bambu-green font-mono break-all select-all`,children:Lr}),(0,G.jsx)(GW,{value:Lr,titleKey:`settings.copyUpdateCommand`,copiedTitleKey:`printers.copied`,className:`ml-0 p-2 rounded hover:bg-bambu-dark text-bambu-gray hover:text-white transition-colors flex-shrink-0`,iconClassName:`w-4 h-4`})]}),(0,G.jsxs)(`label`,{className:`block mt-3`,children:[(0,G.jsx)(`span`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.composeDirectory`)}),(0,G.jsx)(`input`,{type:`text`,value:A?.docker_compose_dir??``,onChange:e=>yr(`docker_compose_dir`,e.target.value),placeholder:Pn?.compose_dir_detected||`/opt/bambuddy`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded text-sm text-white font-mono placeholder:text-bambu-gray/60 focus:outline-none focus:border-bambu-green`}),(0,G.jsx)(`span`,{className:`block text-xs text-bambu-gray mt-1`,children:i(`settings.composeDirectoryHint`)})]})]}):Pn?.update_method===`windows_installer`?(0,G.jsxs)(`div`,{className:`mt-3 p-3 bg-bambu-dark-tertiary rounded-lg`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-3`,children:i(`settings.updateViaWindowsInstaller`)}),(0,G.jsxs)(`a`,{href:Pn.installer_download_url||Pn.release_url||`https://github.com/maziggy/bambuddy/releases/tag/v${Pn.latest_version}`,target:`_blank`,rel:`noopener noreferrer`,className:`inline-flex items-center justify-center font-medium rounded-lg transition-colors focus:outline-none focus:ring-2 focus:ring-offset-2 focus:ring-offset-bambu-dark disabled:opacity-50 bg-bambu-green hover:bg-bambu-green-light text-white focus:ring-bambu-green px-4 py-2 text-sm gap-2 min-h-[44px] md:min-h-0`,children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),i(`settings.downloadWindowsInstaller`,{version:Pn.latest_version})]})]}):(0,G.jsxs)(Q,{className:`mt-3`,onClick:()=>sr.mutate(),disabled:sr.isPending,children:[sr.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Ys,{className:`w-4 h-4`}),i(`settings.installUpdate`)]})]}):Pn?.error?(0,G.jsx)(`div`,{className:`mt-2 p-2 bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 rounded text-sm text-red-700 dark:text-red-400`,children:i(`settings.failedToCheckUpdates`,{error:Pn.error})}):Pn&&!Pn.update_available?(0,G.jsx)(`p`,{className:`mt-2 text-sm text-bambu-gray`,children:i(`settings.latestVersionRunning`)}):null]})]})]}),(0,G.jsx)(UWe,{})]})]})]}),je===`network`&&A&&(0,G.jsxs)(`div`,{className:`flex flex-col lg:flex-row gap-6`,children:[(0,G.jsxs)(`div`,{className:`flex-1 lg:max-w-xl space-y-3`,children:[(0,G.jsxs)(Ld,{id:`card-externalurl`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(kc,{className:`w-5 h-5 text-blue-600 dark:text-blue-400`}),i(`settings.externalUrl`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.externalUrlDescription`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.bambuddyUrl`)}),(0,G.jsx)(`input`,{type:`text`,value:A.external_url??``,onChange:e=>yr(`external_url`,e.target.value),placeholder:`http://192.168.1.100:8000`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.externalUrlHint`)})]})]})]}),(0,G.jsxs)(Ld,{id:`card-ftpretry`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Vl,{className:`w-5 h-5 text-blue-600 dark:text-blue-400`}),i(`settings.ftpRetry`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.ftpRetryDescription`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.enableRetry`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.autoRetryDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.ftp_retry_enabled??!0,onChange:e=>yr(`ftp_retry_enabled`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),A.ftp_retry_enabled&&(0,G.jsxs)(`div`,{className:`space-y-3 pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.retryAttempts`)}),(0,G.jsxs)(`div`,{className:`relative w-44`,children:[(0,G.jsx)(`select`,{value:A.ftp_retry_count??3,onChange:e=>yr(`ftp_retry_count`,parseInt(e.target.value)),className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:[1,2,3,4,5,6,7,8,9,10].map(e=>(0,G.jsx)(`option`,{value:e,children:i(`settings.time`,{count:e})},e))}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.retryDelay`)}),(0,G.jsxs)(`div`,{className:`relative w-44`,children:[(0,G.jsx)(`select`,{value:A.ftp_retry_delay??2,onChange:e=>yr(`ftp_retry_delay`,parseInt(e.target.value)),className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:[1,2,3,5,10,15,20,30].map(e=>(0,G.jsx)(`option`,{value:e,children:i(`settings.second`,{count:e})},e))}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.connectionTimeout`)}),(0,G.jsxs)(`div`,{className:`relative w-44`,children:[(0,G.jsx)(`select`,{value:A.ftp_timeout??30,onChange:e=>yr(`ftp_timeout`,parseInt(e.target.value)),className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:[10,15,20,30,45,60,90,120,180,300].map(e=>(0,G.jsx)(`option`,{value:e,children:i(`settings.nSeconds`,{count:e})},e))}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.increaseForWeakWifi`)})]})]})]})]})]}),(0,G.jsxs)(`div`,{className:`flex-1 lg:max-w-xl space-y-3`,children:[(0,G.jsxs)(Ld,{id:`card-ha`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(zc,{className:`w-5 h-5 text-bambu-green`}),i(`settings.homeAssistant`)]}),A.ha_enabled&&It&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`w-2.5 h-2.5 rounded-full ${It.success?`bg-green-400`:`bg-red-400`}`}),(0,G.jsx)(`span`,{className:`text-sm ${It.success?`text-green-700 dark:text-green-400`:`text-red-700 dark:text-red-400`}`,children:It.success?i(`settings.connected`):i(`settings.disconnected`)})]})]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.homeAssistantFullDescription`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.enableHomeAssistant`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.homeAssistantDescription`)}),A.ha_env_managed&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1 mt-1`,children:[(0,G.jsx)(tl,{className:`w-3 h-3 text-bambu-green`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-green`,children:i(`settings.autoEnabledViaEnv`)})]})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.ha_enabled??!1,onChange:e=>yr(`ha_enabled`,e.target.checked),disabled:A.ha_env_managed,className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green ${A.ha_env_managed?`opacity-60 cursor-not-allowed`:``}`})]})]}),A.ha_enabled&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[i(`settings.homeAssistantUrl`),A.ha_url_from_env&&(0,G.jsx)(`span`,{className:`ml-2 text-xs text-bambu-green`,children:i(`settings.environmentManagedLabel`)})]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`input`,{type:`text`,value:A.ha_url??``,onChange:e=>yr(`ha_url`,e.target.value),placeholder:`http://192.168.1.100:8123`,disabled:A.ha_url_from_env,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${A.ha_url_from_env?`opacity-60 cursor-not-allowed`:``}`}),A.ha_url_from_env&&(0,G.jsx)(tl,{className:`absolute right-3 top-2.5 w-4 h-4 text-bambu-gray`})]}),A.ha_url_from_env&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.urlFromEnvReadOnly`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[i(`settings.longLivedAccessToken`),A.ha_token_from_env&&(0,G.jsx)(`span`,{className:`ml-2 text-xs text-bambu-green`,children:i(`settings.environmentManagedLabel`)})]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`input`,{type:`password`,value:A.ha_token??``,onChange:e=>yr(`ha_token`,e.target.value),placeholder:`eyJ0eXAiOiJKV1QiLC...`,disabled:A.ha_token_from_env,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${A.ha_token_from_env?`opacity-60 cursor-not-allowed`:``}`}),A.ha_token_from_env&&(0,G.jsx)(tl,{className:`absolute right-3 top-2.5 w-4 h-4 text-bambu-gray`})]}),A.ha_token_from_env?(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.tokenFromEnvReadOnly`)}):(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.haTokenHint`)})]}),A.ha_url&&A.ha_token&&(0,G.jsx)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,disabled:Rt,onClick:async()=>{zt(!0),Lt(null);try{Lt(await Z.testHAConnection(A.ha_url,A.ha_token))}catch(e){Lt({success:!1,message:null,error:e instanceof Error?e.message:i(`common.unknownError`)})}finally{zt(!1)}},children:[Rt?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Zu,{className:`w-4 h-4`}),i(`settings.testConnection`)]})})]})]})]}),(0,G.jsxs)(Ld,{id:`card-mqtt`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Zu,{className:`w-5 h-5 text-blue-600 dark:text-blue-400`}),i(`settings.mqttPublishing`)]}),zn?.enabled&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`w-2.5 h-2.5 rounded-full ${zn.connected?`bg-green-400`:`bg-red-400`}`}),(0,G.jsx)(`span`,{className:`text-sm ${zn.connected?`text-green-700 dark:text-green-400`:`text-red-700 dark:text-red-400`}`,children:zn.connected?i(`settings.connected`):i(`settings.disconnected`)})]})]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.mqttDescription`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.enableMqtt`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.mqttEnableDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.mqtt_enabled??!1,onChange:e=>yr(`mqtt_enabled`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),A.mqtt_enabled&&(0,G.jsxs)(`div`,{className:`space-y-3 pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.brokerHostname`)}),(0,G.jsx)(`input`,{type:`text`,value:A.mqtt_broker??``,onChange:e=>yr(`mqtt_broker`,e.target.value),placeholder:`mqtt.example.com or 192.168.1.100`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`flex items-end gap-4`,children:[(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.port`)}),(0,G.jsx)(`input`,{type:`number`,min:`1`,max:`65535`,value:A.mqtt_port??1883,onChange:e=>yr(`mqtt_port`,Math.min(65535,Math.max(1,parseInt(e.target.value)||1883))),className:`w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3 pb-2`,children:[(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.mqtt_use_tls??!1,onChange:e=>{let t=e.target.checked;yr(`mqtt_use_tls`,t);let n=A.mqtt_port??1883;t&&n===1883?yr(`mqtt_port`,8883):!t&&n===8883&&yr(`mqtt_port`,1883)},className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]}),(0,G.jsx)(`span`,{className:`text-white text-sm`,children:i(`settings.useTls`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.usernameOptional`)}),(0,G.jsx)(`input`,{type:`text`,value:A.mqtt_username??``,onChange:e=>yr(`mqtt_username`,e.target.value),placeholder:i(`settings.leaveEmptyForAnonymous`),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.passwordOptional`)}),(0,G.jsx)(`input`,{type:`password`,value:A.mqtt_password??``,onChange:e=>yr(`mqtt_password`,e.target.value),placeholder:i(`settings.leaveEmptyForAnonymous`),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.topicPrefix`)}),(0,G.jsx)(`input`,{type:`text`,value:A.mqtt_topic_prefix??`bambuddy`,onChange:e=>yr(`mqtt_topic_prefix`,e.target.value),placeholder:`bambuddy`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.topicPrefixHint`,{prefix:A.mqtt_topic_prefix||`bambuddy`})})]}),zn&&(0,G.jsx)(`div`,{className:`pt-3 mt-3 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full ${zn.connected?`bg-green-400`:`bg-red-400`}`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:zn.connected?(0,G.jsxs)(G.Fragment,{children:[i(`settings.mqttConnectedTo`),` `,(0,G.jsxs)(`span`,{className:`text-white`,children:[zn.broker,`:`,zn.port]})]}):i(`settings.spoolmanDisconnected`)})]})})]})]})]})]}),(0,G.jsx)(`div`,{className:`flex-1 lg:max-w-md space-y-3`,children:(0,G.jsxs)(Ld,{id:`card-prometheus`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Fu,{className:`w-5 h-5 text-orange-600 dark:text-orange-400`}),i(`settings.prometheusMetrics`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.prometheusEndpointDescription`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.enableMetricsEndpoint`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.prometheusDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.prometheus_enabled??!1,onChange:e=>yr(`prometheus_enabled`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),A.prometheus_enabled&&(0,G.jsxs)(`div`,{className:`space-y-3 pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.bearerTokenOptional`)}),(0,G.jsx)(`input`,{type:`password`,value:A.prometheus_token??``,onChange:e=>yr(`prometheus_token`,e.target.value),placeholder:i(`settings.leaveEmptyForNoAuth`),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.bearerTokenHint`)})]}),(0,G.jsxs)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white mb-2`,children:i(`settings.availableMetrics`)}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray space-y-1`,children:[(0,G.jsxs)(`p`,{children:[(0,G.jsx)(`code`,{className:`text-orange-700 dark:text-orange-400`,children:`bambuddy_printer_connected`}),` - `,i(`settings.metricsConnectionStatus`)]}),(0,G.jsxs)(`p`,{children:[(0,G.jsx)(`code`,{className:`text-orange-700 dark:text-orange-400`,children:`bambuddy_printer_state`}),` - `,i(`settings.metricsPrinterState`)]}),(0,G.jsxs)(`p`,{children:[(0,G.jsx)(`code`,{className:`text-orange-700 dark:text-orange-400`,children:`bambuddy_print_progress`}),` - `,i(`settings.metricsPrintProgress`)]}),(0,G.jsxs)(`p`,{children:[(0,G.jsx)(`code`,{className:`text-orange-700 dark:text-orange-400`,children:`bambuddy_bed_temp_celsius`}),` - `,i(`settings.metricsBedTemp`)]}),(0,G.jsxs)(`p`,{children:[(0,G.jsx)(`code`,{className:`text-orange-700 dark:text-orange-400`,children:`bambuddy_nozzle_temp_celsius`}),` - `,i(`settings.metricsNozzleTemp`)]}),(0,G.jsxs)(`p`,{children:[(0,G.jsx)(`code`,{className:`text-orange-700 dark:text-orange-400`,children:`bambuddy_prints_total`}),` - `,i(`settings.metricsPrintsTotal`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray/70 italic`,children:i(`settings.metricsMore`)})]})]})]})]})]})})]}),It&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg p-6 max-w-md w-full mx-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mb-4`,children:[It.success?(0,G.jsx)(xs,{className:`w-8 h-8 text-green-600 dark:text-green-400`}):(0,G.jsx)(Ds,{className:`w-8 h-8 text-red-600 dark:text-red-400`}),(0,G.jsx)(`h3`,{className:`text-lg font-medium text-white`,children:It.success?i(`settings.connectionSuccessful`):i(`settings.connectionFailed`)})]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mb-6`,children:It.success?It.message||i(`settings.haConnectionSuccess`):It.error||i(`settings.haConnectionFailed`)}),(0,G.jsx)(`div`,{className:`flex justify-end`,children:(0,G.jsx)(Q,{variant:`primary`,onClick:()=>Lt(null),children:i(`settings.ok`)})})]})}),je===`plugs`&&(0,G.jsxs)(`div`,{id:`card-plugs`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between mb-6`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Nl,{className:`w-5 h-5 text-bambu-green`}),i(`settings.smartPlugs`)]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:i(`settings.smartPlugsDescription`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 pt-1 shrink-0`,children:[Zt&&Zt.filter(e=>e.enabled).length>1&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,className:`whitespace-nowrap`,onClick:()=>it(`on`),disabled:dr.isPending,title:i(`settings.turnAllPlugsOn`),children:[dr.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Il,{className:`w-4 h-4 text-bambu-green`}),i(`settings.allOn`)]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,className:`whitespace-nowrap`,onClick:()=>it(`off`),disabled:dr.isPending,title:i(`settings.turnAllPlugsOff`),children:[dr.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Fl,{className:`w-4 h-4 text-red-600 dark:text-red-400`}),i(`settings.allOff`)]})]}),(0,G.jsxs)(Q,{className:`whitespace-nowrap`,onClick:()=>{L(null),F(!0)},children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`settings.addSmartPlug`)]})]})]}),Zt&&Zt.length>0&&(0,G.jsxs)(Ld,{className:`mb-6`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(rd,{className:`w-4 h-4 text-yellow-600 dark:text-yellow-400`}),i(`settings.energySummary`),en&&(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin text-bambu-gray ml-2`})]})}),(0,G.jsx)(zd,{children:$t?(0,G.jsxs)(`div`,{className:`grid grid-cols-2 md:grid-cols-4 gap-4`,children:[(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray text-xs mb-1`,children:[(0,G.jsx)(rd,{className:`w-3 h-3`}),i(`settings.currentPower`)]}),(0,G.jsxs)(`div`,{className:`text-xl font-bold text-white`,children:[$t.totalPower.toFixed(1),(0,G.jsx)(`span`,{className:`text-sm font-normal text-bambu-gray ml-1`,children:`W`})]}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.plugsOnline`,{reachable:$t.reachableCount,total:$t.totalPlugs})})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray text-xs mb-1`,children:[(0,G.jsx)(as,{className:`w-3 h-3`}),i(`settings.today`)]}),(0,G.jsxs)(`div`,{className:`text-xl font-bold text-white`,children:[$t.totalToday.toFixed(3),(0,G.jsx)(`span`,{className:`text-sm font-normal text-bambu-gray ml-1`,children:`kWh`})]}),(A?.energy_cost_per_kwh??0)>0&&(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray mt-1`,children:[`~`,($t.totalToday*(A?.energy_cost_per_kwh??0)).toFixed(2),` `,Pf(A?.currency||`USD`)]})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray text-xs mb-1`,children:[(0,G.jsx)(Fu,{className:`w-3 h-3`}),i(`settings.yesterday`)]}),(0,G.jsxs)(`div`,{className:`text-xl font-bold text-white`,children:[$t.totalYesterday.toFixed(3),(0,G.jsx)(`span`,{className:`text-sm font-normal text-bambu-gray ml-1`,children:`kWh`})]}),(A?.energy_cost_per_kwh??0)>0&&(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray mt-1`,children:[`~`,($t.totalYesterday*(A?.energy_cost_per_kwh??0)).toFixed(2),` `,Pf(A?.currency||`USD`)]})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray text-xs mb-1`,children:[(0,G.jsx)(Ks,{className:`w-3 h-3`}),i(`settings.total`)]}),(0,G.jsxs)(`div`,{className:`text-xl font-bold text-white`,children:[$t.totalLifetime.toFixed(1),(0,G.jsx)(`span`,{className:`text-sm font-normal text-bambu-gray ml-1`,children:`kWh`})]}),(A?.energy_cost_per_kwh??0)>0&&(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray mt-1`,children:[`~`,($t.totalLifetime*(A?.energy_cost_per_kwh??0)).toFixed(2),` `,Pf(A?.currency||`USD`)]})]})]}):en?null:(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.enablePlugsForSummary`)})})]}),Qt?(0,G.jsx)(`div`,{className:`flex justify-center py-12`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):Zt&&Zt.length>0?(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 lg:grid-cols-3 xl:grid-cols-4 gap-4`,children:Zt.map(e=>(0,G.jsx)(qUe,{plug:e,onEdit:e=>{L(e),F(!0)}},e.id))}):(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-12`,children:(0,G.jsxs)(`div`,{className:`text-center text-bambu-gray`,children:[(0,G.jsx)(Nl,{className:`w-16 h-16 mx-auto mb-4 opacity-30`}),(0,G.jsx)(`p`,{className:`text-lg font-medium text-white mb-2`,children:i(`settings.noSmartPlugsTitle`)}),(0,G.jsx)(`p`,{className:`text-sm mb-4`,children:i(`settings.noSmartPlugsDescription`)}),(0,G.jsxs)(Q,{onClick:()=>{L(null),F(!0)},children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`settings.addFirstSmartPlug`)]})]})})})]}),je===`sensors`&&(0,G.jsxs)(`div`,{id:`card-sensors`,children:[(0,G.jsxs)(`div`,{id:`card-ha-sensors`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-4`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(wc,{className:`w-5 h-5 text-bambu-green`}),i(`haSensors.sectionTitle`)]}),(0,G.jsxs)(Q,{className:`whitespace-nowrap`,disabled:!sn?.length,onClick:()=>{V(null),z(!0)},children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`haSensors.add`)]})]}),cn&&cn.length>0?(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 lg:grid-cols-3 gap-4`,children:cn.map(e=>{let t=sn?.find(t=>t.id===e.printer_id);return(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`py-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-2`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-white font-medium truncate`,children:e.name}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray truncate`,children:e.entity_id}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mt-1`,children:t?.name??i(`haSensors.unknownPrinter`)})]}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>{V(e),z(!0)},children:i(`common.edit`)})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-1 mt-3`,children:[e.block_print&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 text-xs rounded bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400`,children:i(`haSensors.badgeBlocks`)}),e.notify_on_alert&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 text-xs rounded bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`,children:i(`haSensors.badgeNotifies`)}),!e.show_on_printer_card&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 text-xs rounded bg-bambu-dark-tertiary text-bambu-gray`,children:i(`haSensors.badgeHidden`)})]})]})},e.id)})}):(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-8`,children:(0,G.jsxs)(`div`,{className:`text-center text-bambu-gray`,children:[(0,G.jsx)(wc,{className:`w-12 h-12 mx-auto mb-3 opacity-30`}),(0,G.jsx)(`p`,{className:`text-sm`,children:i(`haSensors.empty`)})]})})})]}),(0,G.jsxs)(`div`,{id:`card-location-sensors`,className:`mt-8`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-[20px] mb-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(wc,{className:`w-5 h-5 text-bambu-green`}),i(`locationHaSensors.sectionTitle`)]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:i(`locationHaSensors.sectionDescription`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 pt-1 shrink-0`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>ae(!0),className:`p-2 rounded-lg bg-bambu-dark-tertiary hover:bg-bambu-gray-dark text-white transition-colors`,title:i(`locationHaSensors.options.buttonLabel`),"aria-label":i(`locationHaSensors.options.buttonLabel`),children:(0,G.jsx)(Rs,{className:`w-4 h-4`})}),(0,G.jsxs)(Q,{className:`whitespace-nowrap`,disabled:!un?.length,onClick:()=>{re(null),te(!0)},children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`locationHaSensors.add`)]})]})]}),ln&&ln.length>0?(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 lg:grid-cols-3 gap-4`,children:(()=>{let e=new Map((un??[]).map((e,t)=>[e.id,t])),t=ln.reduce((e,t)=>{let n=e.get(t.location_id)??[];return n.push(t),e.set(t.location_id,n),e},new Map);return Array.from(t.entries()).sort(([t],[n])=>(e.get(t)??2**53-1)-(e.get(n)??2**53-1))})().map(([e,t])=>{let n=un?.find(t=>t.id===e),r=e=>VT({device_class:e.device_class,state:e.last_state,kind:e.kind}),a=[...t].sort((e,t)=>(RGe[e.device_class??``]??99)-(RGe[t.device_class??``]??99));return(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`py-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-2`,children:[(0,G.jsx)(`div`,{className:`text-white font-medium truncate`,children:n?.name??i(`locationHaSensors.unknownLocation`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>ue({locationName:n?.name??i(`locationHaSensors.unknownLocation`),sensorIds:a.map(e=>e.id)}),className:`p-1 text-bambu-gray hover:text-red-500 rounded transition-colors shrink-0`,title:i(`common.delete`),"aria-label":i(`common.delete`),children:(0,G.jsx)(Nu,{className:`w-3.5 h-3.5`})})]}),(0,G.jsx)(`div`,{className:`mt-2 space-y-1.5`,children:a.map(e=>{let t=r(e),n=fn.get(e.id),a=zGe(n,i),o=TUe(oe&&n?wUe(n):null,se,H,ce)||`text-white`;return(0,G.jsxs)(`div`,{className:`flex items-center min-w-0 text-xs text-bambu-gray`,children:[(0,G.jsx)(t,{className:`w-3.5 h-3.5 shrink-0 mr-1.5`}),a&&(0,G.jsx)(`span`,{className:`${o} shrink-0 w-[52px] text-center`,children:a}),a&&(0,G.jsx)(`span`,{className:`shrink-0 mr-1.5`,children:`-`}),(0,G.jsx)(`span`,{className:`truncate mr-1.5`,title:e.name,children:e.entity_id}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>{re(e),te(!0)},className:`p-1 text-bambu-gray hover:text-white rounded transition-colors shrink-0`,title:i(`common.edit`),"aria-label":i(`common.edit`),children:(0,G.jsx)(kl,{className:`w-3.5 h-3.5`})})]},e.id)})}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-1 mt-3`,children:[(()=>{let e=a.filter(e=>e.notify_on_alert);return e.length?(0,G.jsxs)(`span`,{className:`flex items-center gap-1 px-2 py-0.5 text-xs rounded bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`,children:[i(`haSensors.badgeNotifies`),e.map(e=>(0,G.jsx)(r(e),{className:`w-3 h-3`},e.id))]}):null})(),(()=>{let e=a.filter(e=>!e.show_on_card);return e.length?(0,G.jsxs)(`span`,{className:`flex items-center gap-1 px-2 py-0.5 text-xs rounded bg-bambu-dark-tertiary text-bambu-gray`,children:[i(`haSensors.badgeHidden`),e.map(e=>(0,G.jsx)(r(e),{className:`w-3 h-3`},e.id))]}):null})()]})]})},e)})}):(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-8`,children:(0,G.jsxs)(`div`,{className:`text-center text-bambu-gray`,children:[(0,G.jsx)(wc,{className:`w-12 h-12 mx-auto mb-3 opacity-30`}),(0,G.jsx)(`p`,{className:`text-sm`,children:i(`locationHaSensors.empty`)})]})})})]})]}),je===`notifications`&&(0,G.jsxs)(`div`,{className:`grid grid-cols-1 lg:grid-cols-2 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-4`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,id:`card-providers`,children:[(0,G.jsx)(qo,{className:`w-5 h-5 text-bambu-green`}),i(`settings.providers`)]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>Se(!0),children:[(0,G.jsx)(Rc,{className:`w-4 h-4`}),i(`settings.log`)]}),tn&&tn.length>0&&(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>{lr(null),ur.mutate()},disabled:ur.isPending,children:[ur.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Ql,{className:`w-4 h-4`}),i(`settings.testAll`)]}),(0,G.jsxs)(Q,{size:`sm`,onClick:()=>{me(null),fe(!0)},children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`settings.addNotificationProvider`)]})]})]}),(0,G.jsx)(Ld,{className:`mb-4`,children:(0,G.jsx)(zd,{className:`py-3`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white text-sm font-medium`,children:i(`settings.notificationLanguage`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.notificationLanguageDescription`)})]}),(0,G.jsx)(`select`,{value:A.notification_language||`en`,onChange:e=>yr(`notification_language`,e.target.value),className:`px-2 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm focus:outline-none focus:ring-1 focus:ring-bambu-green`,children:kt.map(e=>(0,G.jsx)(`option`,{value:e.code,children:e.nativeName},e.code))})]})})}),(0,G.jsx)(Ld,{className:`mb-4`,children:(0,G.jsx)(zd,{className:`py-3`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white text-sm font-medium`,children:i(`settings.bedCooledThreshold`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.bedCooledThresholdDescription`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`input`,{type:`number`,min:20,max:80,step:1,value:A.bed_cooled_threshold??35,onChange:e=>yr(`bed_cooled_threshold`,Number(e.target.value)),className:`w-16 px-2 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm text-center focus:outline-none focus:ring-1 focus:ring-bambu-green`}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:`°C`})]})]})})}),(0,G.jsx)(Ld,{className:`mb-4`,children:(0,G.jsx)(zd,{className:`py-3`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between ${Hn?.advanced_auth_enabled?``:`opacity-50`}`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white text-sm font-medium`,children:i(`settings.userNotificationsEnabled`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:Hn?.advanced_auth_enabled?i(`settings.userNotificationsEnabledDescription`):i(`settings.userNotificationsDisabledHint`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,className:`sr-only peer`,checked:A.user_notifications_enabled??!0,disabled:!Hn?.advanced_auth_enabled,onChange:e=>yr(`user_notifications_enabled`,e.target.checked)}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green peer-disabled:cursor-not-allowed`})]})]})})}),cr&&(0,G.jsx)(Ld,{className:`mb-4`,children:(0,G.jsxs)(zd,{className:`py-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`span`,{className:`text-sm font-medium text-white`,children:i(`settings.testResults`)}),(0,G.jsx)(`button`,{onClick:()=>lr(null),className:`text-bambu-gray hover:text-white text-xs`,children:i(`common.dismiss`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-4 text-sm mb-2`,children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-bambu-green`,children:[(0,G.jsx)(xs,{className:`w-4 h-4`}),i(`settings.testPassedCount`,{count:cr.success})]}),cr.failed>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-red-700 dark:text-red-400`,children:[(0,G.jsx)(Ds,{className:`w-4 h-4`}),i(`settings.testFailedCount`,{count:cr.failed})]})]}),cr.results.filter(e=>!e.success).length>0&&(0,G.jsx)(`div`,{className:`space-y-1 mt-2 pt-2 border-t border-bambu-dark-tertiary`,children:cr.results.filter(e=>!e.success).map(e=>(0,G.jsxs)(`div`,{className:`text-xs text-red-700 dark:text-red-400`,children:[(0,G.jsxs)(`span`,{className:`font-medium`,children:[e.provider_name,`:`]}),` `,e.message]},e.provider_id))})]})}),W?(0,G.jsx)(`div`,{className:`flex justify-center py-12`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})}):tn&&tn.length>0?(0,G.jsx)(`div`,{className:`space-y-3`,children:tn.map(e=>(0,G.jsx)(iWe,{provider:e,onEdit:e=>{me(e),fe(!0)}},e.id))}):(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-8`,children:(0,G.jsxs)(`div`,{className:`text-center text-bambu-gray`,children:[(0,G.jsx)(qo,{className:`w-12 h-12 mx-auto mb-3 opacity-30`}),(0,G.jsx)(`p`,{className:`text-sm font-medium text-white mb-2`,children:i(`settings.noProvidersTitle`)}),(0,G.jsx)(`p`,{className:`text-xs mb-3`,children:i(`settings.noProvidersDescription`)}),(0,G.jsxs)(Q,{size:`sm`,onClick:()=>{me(null),fe(!0)},children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`settings.addProvider`)]})]})})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2 mb-2`,id:`card-templates`,children:[(0,G.jsx)(dc,{className:`w-5 h-5 text-bambu-green`}),i(`settings.messageTemplates`)]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-3`,children:i(`settings.messageTemplatesDescription`)}),(0,G.jsxs)(`div`,{className:`relative mb-3`,children:[(0,G.jsx)(Zl,{className:`w-4 h-4 text-bambu-gray absolute left-3 top-1/2 -translate-y-1/2 pointer-events-none`}),(0,G.jsx)(`input`,{type:`text`,value:_e,onChange:e=>ve(e.target.value),placeholder:i(`settings.filterTemplates`,`Filter templates…`),className:`w-full pl-9 pr-8 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`}),_e&&(0,G.jsx)(`button`,{onClick:()=>ve(``),className:`absolute right-2 top-1/2 -translate-y-1/2 p-1 text-bambu-gray hover:text-white`,"aria-label":`Clear filter`,children:(0,G.jsx)(td,{className:`w-3.5 h-3.5`})})]}),gn?(0,G.jsx)(`div`,{className:`flex justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})}):hn&&hn.length>0?(()=>{let e=_e.trim().toLowerCase(),t=[...hn].sort((e,t)=>e.name.localeCompare(t.name)).filter(t=>!e||t.name.toLowerCase().includes(e)||(t.title_template||``).toLowerCase().includes(e));return t.length===0?(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic text-center py-6`,children:i(`settings.noTemplatesMatch`,`No templates match your filter.`)}):(0,G.jsx)(`div`,{className:`space-y-2`,children:t.map(e=>(0,G.jsx)(Ld,{className:`cursor-pointer hover:border-bambu-green/50 transition-colors`,onClick:()=>ge(e),children:(0,G.jsx)(zd,{className:`py-2.5 px-3`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium text-sm truncate`,children:e.name}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-xs truncate mt-0.5`,children:e.title_template})]}),(0,G.jsx)(`button`,{className:`p-1.5 hover:bg-bambu-dark-tertiary rounded transition-colors shrink-0 ml-2`,onClick:t=>{t.stopPropagation(),ge(e)},children:(0,G.jsx)(Ol,{className:`w-4 h-4 text-bambu-gray`})})]})})},e.id))})})():(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-8`,children:(0,G.jsxs)(`div`,{className:`text-center text-bambu-gray`,children:[(0,G.jsx)(dc,{className:`w-12 h-12 mx-auto mb-3 opacity-30`}),(0,G.jsx)(`p`,{className:`text-sm`,children:i(`settings.noTemplatesAvailable`)})]})})})]})]}),je===`apikeys`&&(0,G.jsxs)(`div`,{className:d(`api_keys:read`)?`grid grid-cols-1 xl:grid-cols-2 gap-4`:`grid grid-cols-1 gap-4`,children:[(0,G.jsxs)(`div`,{children:[d(`api_keys:read`)&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-4 mb-6`,children:[(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,id:`card-createapi`,children:[(0,G.jsx)(Gc,{className:`w-5 h-5 text-bambu-green`}),i(`settings.apiKeys`)]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:i(`settings.apiKeysDescription`)})]}),(0,G.jsxs)(Q,{size:`sm`,onClick:()=>Be(!0),className:`flex-shrink-0`,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`settings.createKey`)]})]}),Ge&&(0,G.jsx)(Ld,{className:`mb-6 border-bambu-green`,children:(0,G.jsx)(zd,{className:`py-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(xs,{className:`w-5 h-5 text-bambu-green flex-shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium mb-1`,children:i(`settings.apiKeyCreated`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-2`,children:i(`settings.apiKeyCopyWarning`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 bg-bambu-dark rounded-lg p-2`,children:[(0,G.jsx)(`code`,{className:`flex-1 text-sm text-bambu-green font-mono break-all`,children:Ge}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:async()=>{try{if(navigator.clipboard&&navigator.clipboard.writeText)await navigator.clipboard.writeText(Ge);else{let e=document.createElement(`textarea`);e.value=Ge,e.style.position=`fixed`,e.style.left=`-999999px`,document.body.appendChild(e),e.select(),document.execCommand(`copy`),document.body.removeChild(e)}o(i(`settings.toast.keyCopied`))}catch{o(i(`settings.toast.copyFailed`),`error`)}},children:(0,G.jsx)(Vs,{className:`w-4 h-4`})})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 mt-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>{Qe(Ge),o(i(`settings.toast.keyAddedToBrowser`))},children:i(`settings.useInApiBrowser`)}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>Je(!0),children:[(0,G.jsx)(Rl,{className:`w-4 h-4`}),i(`settings.apiKeyQrButton`)]}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>{Je(!1),Ke(null)},children:i(`common.dismiss`)})]})]})]})})}),qe&&Ge&&(0,G.jsx)(PWe,{apiKey:Ge,baseUrl:A?.external_url||void 0,onClose:()=>Je(!1)}),ze&&(0,G.jsxs)(Ld,{className:`mb-6`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h3`,{className:`text-base font-semibold text-white`,children:i(`settings.createNewApiKey`)})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.keyName`)}),(0,G.jsx)(`input`,{type:`text`,value:Ve,onChange:e=>He(e.target.value),placeholder:i(`settings.keyNamePlaceholder`),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-2`,children:i(`common.permissions`)}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ue.can_read_status,onChange:e=>We(t=>({...t,can_read_status:e.target.checked})),className:`w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white`,children:i(`settings.readStatus`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.readStatusDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ue.can_queue,onChange:e=>We(t=>({...t,can_queue:e.target.checked})),className:`w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white`,children:i(`settings.manageQueue`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.manageQueueDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ue.can_control_printer,onChange:e=>We(t=>({...t,can_control_printer:e.target.checked})),className:`w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white`,children:i(`settings.controlPrinter`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.controlPrinterDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ue.can_manage_library,onChange:e=>We(t=>({...t,can_manage_library:e.target.checked})),className:`w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white`,children:i(`settings.manageLibrary`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.manageLibraryDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ue.can_manage_inventory,onChange:e=>We(t=>({...t,can_manage_inventory:e.target.checked})),className:`w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white`,children:i(`settings.manageInventory`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.manageInventoryDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ue.can_manage_maintenance,onChange:e=>We(t=>({...t,can_manage_maintenance:e.target.checked})),className:`w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white`,children:i(`settings.manageMaintenance`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.manageMaintenanceDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ue.can_manage_archives,onChange:e=>We(t=>({...t,can_manage_archives:e.target.checked})),className:`w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white`,children:i(`settings.manageArchives`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.manageArchivesDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ue.can_manage_projects,onChange:e=>We(t=>({...t,can_manage_projects:e.target.checked})),className:`w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white`,children:i(`settings.manageProjects`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.manageProjectsDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ue.can_access_cloud,onChange:e=>We(t=>({...t,can_access_cloud:e.target.checked})),className:`w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white`,children:i(`settings.cloudAccess`,`Allow cloud access`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.cloudAccessDescription`,`Read Bambu Cloud presets and filaments on your behalf. Requires you to be signed into Bambu Cloud.`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ue.can_update_energy_cost,onChange:e=>We(t=>({...t,can_update_energy_cost:e.target.checked})),className:`w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white`,children:i(`settings.updateEnergyCost`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.updateEnergyCostDescription`)})]})]})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 pt-2`,children:[(0,G.jsxs)(Q,{onClick:()=>an.mutate({name:Ve||i(`settings.unnamedKey`),...Ue}),disabled:an.isPending,children:[an.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`settings.createKey`)]}),(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>Be(!1),children:i(`common.cancel`)})]})]})]}),rn?(0,G.jsx)(`div`,{className:`flex justify-center py-12`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):nn&&nn.length>0?(0,G.jsx)(`div`,{className:`space-y-3`,children:nn.map(e=>(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-3`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(Gc,{className:`w-5 h-5 ${e.enabled?`text-bambu-green`:`text-bambu-gray`}`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e.name}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[e.key_prefix,`••••••••`,e.last_used&&` · ${i(`settings.lastUsed`)}: ${np(e.last_used)}`]})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex gap-1 text-xs flex-wrap justify-end`,children:[e.can_read_status&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400 rounded`,children:i(`settings.read`)}),e.can_queue&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-400 rounded`,children:i(`queue.title`)}),e.can_control_printer&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-orange-100 dark:bg-orange-500/20 text-orange-700 dark:text-orange-400 rounded`,children:i(`settings.control`)}),e.can_manage_library&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-cyan-100 dark:bg-cyan-500/20 text-cyan-700 dark:text-cyan-400 rounded`,children:i(`settings.libraryBadge`)}),e.can_manage_inventory&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-pink-100 dark:bg-pink-500/20 text-pink-700 dark:text-pink-400 rounded`,children:i(`settings.inventoryBadge`)}),e.can_manage_maintenance&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-teal-100 dark:bg-teal-500/20 text-teal-700 dark:text-teal-400 rounded`,children:i(`settings.maintenanceBadge`)}),e.can_manage_archives&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-indigo-100 dark:bg-indigo-500/20 text-indigo-700 dark:text-indigo-400 rounded`,children:i(`settings.archivesBadge`)}),e.can_manage_projects&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-lime-100 dark:bg-lime-500/20 text-lime-700 dark:text-lime-400 rounded`,children:i(`settings.projectsBadge`)}),e.can_access_cloud&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-400 rounded`,children:i(`settings.cloudBadge`,`Cloud`)}),e.can_update_energy_cost&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400 rounded`,children:i(`settings.energyCostBadge`)}),e.user_id===null&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400 rounded`,title:i(`settings.legacyKeyTooltip`,`Created before per-user ownership; recreate to use cloud access`),children:i(`settings.legacyKey`,`Legacy`)})]}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>Xe(e.id),children:(0,G.jsx)(Nu,{className:`w-4 h-4 text-red-600 dark:text-red-400`})})]})]})})},e.id))}):(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-12`,children:(0,G.jsxs)(`div`,{className:`text-center text-bambu-gray`,children:[(0,G.jsx)(Gc,{className:`w-16 h-16 mx-auto mb-4 opacity-30`}),(0,G.jsx)(`p`,{className:`text-lg font-medium text-white mb-2`,children:i(`settings.apiKeysEmptyTitle`)}),(0,G.jsx)(`p`,{className:`text-sm mb-4`,children:i(`settings.apiKeysEmptyDescription`)}),(0,G.jsxs)(Q,{onClick:()=>Be(!0),children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`settings.createFirstKey`)]})]})})}),(0,G.jsxs)(Ld,{className:`mt-6`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h3`,{className:`text-base font-semibold text-white`,id:`card-webhooks`,children:i(`settings.webhookEndpoints`)})}),(0,G.jsxs)(zd,{className:`space-y-3 text-sm`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:i(`settings.webhookApiKeyHint`)}),(0,G.jsxs)(`div`,{className:`space-y-2 font-mono text-xs`,children:[(0,G.jsxs)(`div`,{className:`p-2 bg-bambu-dark rounded`,children:[(0,G.jsx)(`span`,{className:`text-blue-700 dark:text-blue-400`,children:`GET`}),` `,(0,G.jsx)(`span`,{className:`text-white`,children:`/api/v1/webhook/status`}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[` - `,i(`settings.webhook.getAllStatus`)]})]}),(0,G.jsxs)(`div`,{className:`p-2 bg-bambu-dark rounded`,children:[(0,G.jsx)(`span`,{className:`text-blue-700 dark:text-blue-400`,children:`GET`}),` `,(0,G.jsx)(`span`,{className:`text-white`,children:`/api/v1/webhook/status/:id`}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[` - `,i(`settings.webhook.getSpecificStatus`)]})]}),(0,G.jsxs)(`div`,{className:`p-2 bg-bambu-dark rounded`,children:[(0,G.jsx)(`span`,{className:`text-green-700 dark:text-green-400`,children:`POST`}),` `,(0,G.jsx)(`span`,{className:`text-white`,children:`/api/v1/webhook/queue`}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[` - `,i(`settings.webhook.addToQueue`)]})]}),(0,G.jsxs)(`div`,{className:`p-2 bg-bambu-dark rounded`,children:[(0,G.jsx)(`span`,{className:`text-orange-700 dark:text-orange-400`,children:`POST`}),` `,(0,G.jsx)(`span`,{className:`text-white`,children:`/api/v1/webhook/printer/:id/pause`}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[` - `,i(`settings.webhook.pausePrint`)]})]}),(0,G.jsxs)(`div`,{className:`p-2 bg-bambu-dark rounded`,children:[(0,G.jsx)(`span`,{className:`text-orange-700 dark:text-orange-400`,children:`POST`}),` `,(0,G.jsx)(`span`,{className:`text-white`,children:`/api/v1/webhook/printer/:id/resume`}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[` - `,i(`settings.webhook.resumePrint`)]})]}),(0,G.jsxs)(`div`,{className:`p-2 bg-bambu-dark rounded`,children:[(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:`POST`}),` `,(0,G.jsx)(`span`,{className:`text-white`,children:`/api/v1/webhook/printer/:id/stop`}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[` - `,i(`settings.webhook.stopPrint`)]})]})]})]})]})]}),(0,G.jsxs)(Ld,{className:`mt-6`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,id:`card-camera-tokens`,children:[(0,G.jsx)(Wu,{className:`w-4 h-4 text-bambu-green`}),i(`cameraTokens.title`,`Camera API Tokens`)]})}),(0,G.jsx)(zd,{children:(0,G.jsx)(HUe,{})})]}),(0,G.jsxs)(Ld,{className:`mt-6`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,id:`card-stream-overlay`,children:[(0,G.jsx)(ml,{className:`w-4 h-4 text-bambu-green`}),i(`streamOverlay.builder.title`,`Streaming Overlay`)]})}),(0,G.jsx)(zd,{children:(0,G.jsx)(KUe,{})})]})]}),d(`api_keys:read`)&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`mb-6`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,id:`card-apibrowser`,children:[(0,G.jsx)(kc,{className:`w-5 h-5 text-bambu-green`}),i(`settings.apiBrowser`)]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:i(`settings.apiBrowserDescription`)})]}),(0,G.jsx)(Ld,{className:`mb-4`,children:(0,G.jsxs)(zd,{className:`py-3`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-2`,children:i(`settings.apiKeyForTesting`)}),(0,G.jsx)(`input`,{type:`text`,value:Ze,onChange:e=>Qe(e.target.value),placeholder:i(`settings.apiKeyPlaceholder`),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white font-mono text-sm focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-2`,children:i(`settings.apiKeyHint`)})]})}),(0,G.jsx)(AGe,{apiKey:Ze})]})]}),je===`virtual-printer`&&(0,G.jsx)(`div`,{id:`card-vp`,children:(0,G.jsx)(ZWe,{})}),je===`spoolbuddy`&&(0,G.jsx)(`div`,{id:`card-spoolbuddy`,children:(0,G.jsx)(eGe,{})}),je===`queue`&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex gap-1 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`button`,{onClick:()=>Re(`dispatch`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px flex items-center gap-2 ${Fe===`dispatch`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Zc,{className:`w-4 h-4`}),i(`settings.tabs.queueDispatch`,`Queue & Dispatch`)]}),(0,G.jsxs)(`button`,{onClick:()=>Re(`pipelines`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px flex items-center gap-2 ${Fe===`pipelines`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)($u,{className:`w-4 h-4`}),i(`settings.tabs.queuePipelines`,`Pipelines`)]})]}),Fe===`pipelines`&&(0,G.jsx)(jUe,{}),Fe===`dispatch`&&A&&(0,G.jsxs)(`div`,{className:`flex flex-col lg:flex-row gap-4 lg:gap-6`,children:[(0,G.jsxs)(`div`,{className:`lg:w-1/2 space-y-3`,children:[(0,G.jsxs)(Ld,{id:`card-print-options`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Zc,{className:`w-4 h-4 text-bambu-green`}),i(`settings.defaultPrintOptions`,`Default Print Options`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.defaultPrintOptionsDescription`,`Set default values for print options when starting new prints. These can be overridden per print in the print dialog.`)}),[{key:`default_bed_levelling`,label:i(`settings.defaultBedLevelling`,`Bed Levelling`),desc:i(`settings.defaultBedLevellingDesc`,`Auto-level bed before print`),fallback:!0,dualNozzleOnly:!1,tristate:!0},{key:`default_flow_cali`,label:i(`settings.defaultFlowCali`,`Flow Calibration`),desc:i(`settings.defaultFlowCaliDesc`,`Calibrate extrusion flow`),fallback:!1,dualNozzleOnly:!1,tristate:!0},{key:`default_vibration_cali`,label:i(`settings.defaultVibrationCali`,`Vibration Calibration`),desc:i(`settings.defaultVibrationCaliDesc`,`Reduce ringing artifacts`),fallback:!0,dualNozzleOnly:!1,tristate:!1},{key:`default_layer_inspect`,label:i(`settings.defaultLayerInspect`,`First Layer Inspection`),desc:i(`settings.defaultLayerInspectDesc`,`AI inspection of first layer`),fallback:!1,dualNozzleOnly:!1,tristate:!1},{key:`default_timelapse`,label:i(`settings.defaultTimelapse`,`Timelapse`),desc:i(`settings.defaultTimelapseDesc`,`Record timelapse video`),fallback:!1,dualNozzleOnly:!1,tristate:!1},{key:`default_nozzle_offset_cali`,label:i(`settings.defaultNozzleOffsetCali`,`Nozzle Offset Calibration`),desc:i(`settings.defaultNozzleOffsetCaliDesc`,`Calibrate nozzle offsets between extruders`),fallback:!0,dualNozzleOnly:!0,tristate:!0}].filter(({dualNozzleOnly:e})=>!e||(sn||[]).some(e=>e.nozzle_count===2)).map(({key:e,label:t,desc:n,fallback:r,tristate:a})=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex-1 mr-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:t}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:n})]}),a?(0,G.jsx)(`div`,{className:`flex gap-1 shrink-0`,children:LW.map(t=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>yr(e,t),className:`px-2.5 py-1 text-xs rounded transition-colors ${(A[e]??`auto`)===t?RW[t]:`bg-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,children:i(`settings.calibrationMode_${t}`)},t))}):(0,G.jsx)(`div`,{className:`flex gap-1 shrink-0`,children:[`off`,`on`].map(t=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>yr(e,t===`on`),className:`px-2.5 py-1 text-xs rounded transition-colors ${(A[e]??r?`on`:`off`)===t?RW[t]:`bg-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,children:i(`settings.calibrationMode_${t}`)},t))})]},e))]})]}),(0,G.jsxs)(Ld,{id:`card-plate`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(ou,{className:`w-4 h-4 text-bambu-green`}),i(`settings.plateClear`,`Plate-Clear Confirmation`)]})}),(0,G.jsx)(zd,{className:`space-y-3`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex-1 mr-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:i(`settings.requirePlateClear`,`Require plate-clear confirmation`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.requirePlateClearDescription`,`When enabled, the scheduler waits for per-printer plate-clear confirmation before starting queued prints on printers with finished jobs. Disabling this also hides the plate status badge and the "Mark plate as cleared" button on printer cards.`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.require_plate_clear??!1,onChange:e=>yr(`require_plate_clear`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]})})]}),(0,G.jsxs)(Ld,{id:`card-temp-fan-presets`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(ju,{className:`w-4 h-4 text-bambu-green`}),i(`settings.tempFanPresetsTitle`,`Temperature & Fan Presets`)]})}),(0,G.jsxs)(zd,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.tempFanPresetsDescription`,`Customize the quick-select values shown in printer-card temperature and fan-speed popovers. The Off button is always shown.`)}),Lee.map(e=>{let t=wm(A?.[e.key]??``,e.defaults,e.lo,e.hi),n=e.unit===`C`?`°C`:`%`;return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-1`,children:[(0,G.jsxs)(`label`,{className:`text-sm text-white`,children:[i(`settings.${{nozzle_temp_presets:`tempFanPresetsNozzle`,bed_temp_presets:`tempFanPresetsBed`,chamber_temp_presets:`tempFanPresetsChamber`,fan_speed_presets:`tempFanPresetsFan`}[e.key]}`,{nozzle_temp_presets:`Nozzle temperature`,bed_temp_presets:`Bed temperature`,chamber_temp_presets:`Chamber temperature`,fan_speed_presets:`Fan speed`}[e.key]),` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray text-xs`,children:[`(`,n,` · `,e.lo,`–`,e.hi,`)`]})]}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>yr(e.key,``),title:i(`settings.tempFanPresetsReset`,`Reset to defaults`),className:`text-bambu-gray hover:text-white transition-colors p-1 rounded hover:bg-bambu-dark-tertiary`,children:(0,G.jsx)(Ul,{className:`w-3.5 h-3.5`})})]}),(0,G.jsx)(`div`,{className:`flex gap-2`,children:[0,1,2].map(n=>(0,G.jsx)(`input`,{type:`number`,min:e.lo,max:e.hi,value:t[n],onChange:r=>{let i=[t[0],t[1],t[2]],a=parseInt(r.target.value,10);i[n]=Math.max(e.lo,Math.min(e.hi,Number.isFinite(a)?a:e.lo)),yr(e.key,JSON.stringify(i))},className:`flex-1 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`},n))})]},e.key)})]})]}),(0,G.jsxs)(Ld,{id:`card-staggered`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(qc,{className:`w-4 h-4 text-bambu-green`}),i(`settings.staggeredStart`,`Staggered Start`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.staggeredStartDescription`,`Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.`)}),(0,G.jsxs)(`div`,{className:`flex gap-4`,children:[(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.staggerGroupSize`,`Group size`)}),(0,G.jsx)(`input`,{type:`number`,min:1,max:50,value:A.stagger_group_size??2,onChange:e=>yr(`stagger_group_size`,Math.max(1,Math.min(50,parseInt(e.target.value)||1))),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.staggerGroupSizeHelp`,`Printers to start simultaneously per group`)})]}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.staggerInterval`,`Interval (minutes)`)}),(0,G.jsx)(`input`,{type:`number`,min:1,max:60,value:A.stagger_interval_minutes??5,onChange:e=>yr(`stagger_interval_minutes`,Math.max(1,Math.min(60,parseInt(e.target.value)||1))),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.staggerIntervalHelp`,`Delay between each group starting`)})]})]})]})]}),(0,G.jsxs)(Ld,{id:`card-concurrent-uploads`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Ns,{className:`w-4 h-4 text-bambu-green`}),i(`settings.concurrentUploadsTitle`,`Concurrent Uploads`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.concurrentUploadsDescription`,`How many printers the queue may send files to at the same time. Printers receive files slowly (a large print can take several minutes), and each one waits its turn — so on a bigger fleet, raising this is what stops the last printer in a batch from waiting out every transfer before it. Lower it if your network or Bambuddy host struggles with parallel transfers.`)}),(0,G.jsxs)(`div`,{className:`w-full sm:w-1/2`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.concurrentUploadsLabel`,`Printers uploaded to at once`)}),(0,G.jsx)(`input`,{type:`number`,min:1,max:16,value:A.queue_max_concurrent_uploads??4,onChange:e=>yr(`queue_max_concurrent_uploads`,Math.max(1,Math.min(16,parseInt(e.target.value)||1))),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.concurrentUploadsHelp`,`1 sends to one printer at a time (the old behaviour). Default is 4.`)})]})]})]}),(0,G.jsxs)(Ld,{id:`card-preheat`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(mc,{className:`w-4 h-4 text-amber-600 dark:text-amber-400`}),i(`settings.preheatTitle`,`Preheat & Heat Soak`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.preheatDescription`,`Heat the bed (and chamber, if supported) and hold at temperature before each queued print starts. Helpful for engineering filaments (PA, ABS) on printers without an active chamber heater — the bed warms the chamber by radiation while the soak timer runs. The bed target is read from the print file; chamber behaviour depends on printer model.`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex-1 mr-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:i(`settings.preheatEnabled`,`Enable preheat & soak`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:i(`settings.preheatEnabledDesc`,`When off, queued prints dispatch immediately.`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.preheat_enabled??!1,onChange:e=>yr(`preheat_enabled`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 gap-3 pt-1`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.preheatMaxWait`,`Max wait (seconds)`)}),(0,G.jsx)(`input`,{type:`number`,min:60,max:3600,value:A.preheat_max_wait_seconds??900,onChange:e=>yr(`preheat_max_wait_seconds`,Math.max(60,Math.min(3600,parseInt(e.target.value)||900))),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green disabled:opacity-50`,disabled:!(A.preheat_enabled??!1)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.preheatMaxWaitHelp`,`Cap on the chamber warm-up phase before falling through.`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.preheatSoak`,`Soak (seconds)`)}),(0,G.jsx)(`input`,{type:`number`,min:0,max:1800,value:A.preheat_soak_seconds??300,onChange:e=>yr(`preheat_soak_seconds`,Math.max(0,Math.min(1800,parseInt(e.target.value)||0))),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green disabled:opacity-50`,disabled:!(A.preheat_enabled??!1)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.preheatSoakHelp`,`Hold time after target reached or max-wait elapsed.`)})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between pt-2 border-t border-bambu-dark-tertiary/50`,children:[(0,G.jsxs)(`div`,{className:`flex-1 mr-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:i(`settings.keepBedWarm`,`Keep bed warm between prints`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:i(`settings.keepBedWarmDesc`,`While awaiting plate-clear, hold the bed at the keep-warm temperature below so the chamber stays hot — or at the next print's own bed temperature when that is higher. Only applies when the next print needs chamber heating (ASA, ABS, PA, PC etc.). Requires plate-clear confirmation to be enabled.`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.queue_keep_bed_warm??!1,onChange:e=>yr(`queue_keep_bed_warm`,e.target.checked),className:`sr-only peer`,disabled:!(A.preheat_enabled??!1)||!(A.require_plate_clear??!1)}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green peer-disabled:opacity-50 peer-disabled:cursor-not-allowed`})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3 mt-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.keepWarmBedTemp`,`Keep-warm bed temperature (°C)`)}),(0,G.jsx)(`input`,{type:`number`,min:40,max:110,value:A.queue_keep_warm_bed_temp??90,onChange:e=>yr(`queue_keep_warm_bed_temp`,Math.max(40,Math.min(110,parseInt(e.target.value)||90))),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green disabled:opacity-50`,disabled:!(A.preheat_enabled??!1)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.keepWarmBedTempHelp`,`Used whenever the bed's job is to heat the chamber — the keep-warm hold, and preheat when the print file carries no bed temperature. A higher bed temperature from the print file always wins.`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.keepWarmMaxMinutes`,`Stop keeping warm after (minutes)`)}),(0,G.jsx)(`input`,{type:`number`,min:5,max:480,value:A.queue_keep_warm_max_minutes??120,onChange:e=>yr(`queue_keep_warm_max_minutes`,Math.max(5,Math.min(480,parseInt(e.target.value)||120))),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green disabled:opacity-50`,disabled:!(A.queue_keep_bed_warm??!1)||!(A.preheat_enabled??!1)||!(A.require_plate_clear??!1)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.keepWarmMaxMinutesHelp`,`If the plate is not cleared within this time, the heaters are switched off rather than held indefinitely.`)})]})]}),(0,G.jsxs)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary/50`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-1`,children:[(0,G.jsx)(`label`,{className:`text-sm text-white`,children:i(`settings.preheatFilamentTargetsLabel`,`Per-filament chamber target (°C)`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>yr(`preheat_filament_targets`,``),title:i(`settings.preheatFilamentTargetsReset`,`Reset to defaults`),className:`text-bambu-gray hover:text-white transition-colors p-1 rounded hover:bg-bambu-dark-tertiary`,children:(0,G.jsx)(Ul,{className:`w-3.5 h-3.5`})})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:i(`settings.preheatFilamentTargetsHint`,`Bambuddy picks the highest target across the loaded AMS slots; PLA-only prints derive 0 and skip the chamber phase automatically.`)}),(0,G.jsx)(kUe,{value:A.preheat_filament_targets??``,onChange:e=>yr(`preheat_filament_targets`,e),disabled:!(A.preheat_enabled??!1)})]}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray pt-1 border-t border-bambu-dark-tertiary/50`,children:[(0,G.jsx)(`span`,{className:`font-medium text-bambu-gray/90`,children:i(`settings.preheatHardwareTitle`,`Per-printer behaviour:`)}),` `,i(`settings.preheatHardwareDetail`,`H2C/H2D/H2D Pro/H2S/X2D/X1E actively heat the chamber via M141. X1C/P2S read chamber temp but rely on bed-radiation heating. P1S/P1P/A1/A1 Mini have no chamber sensor — only the soak timer applies.`)]})]})]})]}),(0,G.jsxs)(`div`,{className:`lg:w-1/2 space-y-3`,children:[(0,G.jsxs)(Ld,{id:`card-pipelines`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)($u,{className:`w-4 h-4 text-bambu-green`}),i(`settings.pipelineLimits.title`,`Slicer Pipeline limits`)]})}),(0,G.jsx)(zd,{className:`space-y-2`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:i(`settings.pipelineLimits.maxCopiesLabel`,`Max copies per run`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:i(`settings.pipelineLimits.maxCopiesDesc`,`Upper bound on the copies operators can request when running a pipeline. Server-side hard cap is 1000.`)})]}),(0,G.jsx)(`input`,{type:`number`,min:1,max:1e3,value:A.pipeline_max_copies??50,onChange:e=>{let t=parseInt(e.target.value,10);Number.isNaN(t)||yr(`pipeline_max_copies`,Math.max(1,Math.min(1e3,t)))},"aria-label":i(`settings.pipelineLimits.maxCopiesLabel`,`Max copies per run`),className:`w-24 px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm`})]})})]}),(0,G.jsxs)(Ld,{id:`card-slicer`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Rs,{className:`w-4 h-4 text-bambu-green`}),i(`settings.slicerCard`,`Slicer`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[MGe()&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.sliceEngine`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`select`,{value:u5(A.slice_engine),onChange:e=>yr(`slice_engine`,e.target.value),className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:l5().map(e=>(0,G.jsx)(`option`,{value:e.id,children:i(e.labelKey)},e.id))}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(l5().find(e=>e.id===u5(A.slice_engine))?.descriptionKey??`settings.sliceEngineSidecarHint`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.preferredSlicer`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:A.preferred_slicer??`bambu_studio`,onChange:e=>yr(`preferred_slicer`,e.target.value),className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:[(0,G.jsx)(`option`,{value:`bambu_studio`,children:i(`settings.slicerBambuStudio`)}),(0,G.jsx)(`option`,{value:`orcaslicer`,children:i(`settings.slicerOrcaSlicer`)})]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.preferredSlicerDescription`)}),(A.preferred_slicer??`bambu_studio`)===`orcaslicer`&&(0,G.jsx)(`div`,{role:`alert`,className:`text-xs text-amber-800 dark:text-amber-200 bg-amber-50 dark:bg-amber-900/20 border border-amber-300 dark:border-amber-700/40 rounded p-2 mt-2`,children:i(`settings.orcaslicerKnownIssuesWarning`,`OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.openInSlicerLabel`,`Open in Slicer`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:A.open_in_slicer??``,onChange:e=>yr(`open_in_slicer`,e.target.value===``?null:e.target.value),className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:[(0,G.jsx)(`option`,{value:``,children:i(`settings.openInSlicerInherit`,`Same as API slicer`)}),(0,G.jsx)(`option`,{value:`bambu_studio`,children:i(`settings.slicerBambuStudio`)}),(0,G.jsx)(`option`,{value:`orcaslicer`,children:i(`settings.slicerOrcaSlicer`)})]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.openInSlicerDescription`,`Desktop slicer used by the 'Open in Slicer' button. Leave on 'Same as API slicer' to inherit, or pick a different slicer to use locally.`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.useSlicerApi`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.useSlicerApiDescription`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center cursor-pointer shrink-0`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.use_slicer_api??!1,onChange:e=>yr(`use_slicer_api`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`relative w-11 h-6 bg-bambu-dark-tertiary rounded-full peer peer-checked:bg-bambu-green peer-focus:outline-none peer-focus:ring-2 peer-focus:ring-bambu-green/50 transition-colors after:content-[''] after:absolute after:top-0.5 after:left-0.5 after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-transform peer-checked:after:translate-x-5`})]})]}),(A.use_slicer_api??!1)&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:(A.preferred_slicer??`bambu_studio`)===`orcaslicer`?i(`settings.orcaslicerApiUrl`,`OrcaSlicer sidecar URL`):i(`settings.bambuStudioApiUrl`,`Bambu Studio sidecar URL`)}),(0,G.jsx)(`input`,{type:`text`,value:((A.preferred_slicer??`bambu_studio`)===`orcaslicer`?A.orcaslicer_api_url:A.bambu_studio_api_url)??``,onChange:e=>yr((A.preferred_slicer??`bambu_studio`)===`orcaslicer`?`orcaslicer_api_url`:`bambu_studio_api_url`,e.target.value),placeholder:(A.preferred_slicer??`bambu_studio`)===`orcaslicer`?`http://localhost:3003`:`http://localhost:3001`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none placeholder:text-bambu-gray/40`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.slicerApiUrlDescription`,`URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.`)})]}),(A.use_slicer_api??!1)&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.slicerStallTimeout`)}),(0,G.jsx)(`input`,{type:`number`,min:1,max:240,value:A.slicer_stall_timeout_minutes??15,onChange:e=>yr(`slicer_stall_timeout_minutes`,Number(e.target.value)),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.slicerStallTimeoutDescription`)})]})]})]}),(0,G.jsxs)(Ld,{children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,id:`card-drying`,children:[(0,G.jsx)(mc,{className:`w-4 h-4 text-amber-600 dark:text-amber-400`}),i(`settings.queueDrying`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.queueDryingDescription`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-white`,children:i(`settings.queueDryingEnabled`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:i(`settings.queueDryingEnabledDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.queue_drying_enabled??!1,onChange:e=>yr(`queue_drying_enabled`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),A.queue_drying_enabled&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-white`,children:i(`settings.queueDryingBlock`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:i(`settings.queueDryingBlockDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.queue_drying_block??!1,onChange:e=>yr(`queue_drying_block`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-amber-500`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-white`,children:i(`settings.ambientDryingEnabled`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:i(`settings.ambientDryingEnabledDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.ambient_drying_enabled??!1,onChange:e=>yr(`ambient_drying_enabled`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-white`,children:i(`settings.printDryingEnabled`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:i(`settings.printDryingEnabledDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.print_drying_enabled??!1,onChange:e=>yr(`print_drying_enabled`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white font-medium`,children:i(`settings.dryingPresets`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.dryingPresetsDescription`)}),(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full text-xs`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`text-bambu-gray border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`th`,{className:`text-left py-1.5`,children:i(`settings.dryingFilament`)}),(0,G.jsx)(`th`,{className:`text-center py-1.5`,colSpan:2,children:`AMS 2 Pro`}),(0,G.jsx)(`th`,{className:`text-center py-1.5`,colSpan:2,children:`AMS-HT`})]})}),(0,G.jsx)(`tbody`,{children:(()=>{let e={PLA:{n3f:45,n3s:45,n3f_hours:12,n3s_hours:12},PETG:{n3f:65,n3s:65,n3f_hours:12,n3s_hours:12},TPU:{n3f:65,n3s:75,n3f_hours:12,n3s_hours:18},ABS:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},ASA:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},PA:{n3f:65,n3s:85,n3f_hours:12,n3s_hours:12},PC:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},PVA:{n3f:65,n3s:85,n3f_hours:12,n3s_hours:18}},t={...e};try{if(A.drying_presets){let n=JSON.parse(A.drying_presets);typeof n==`object`&&n&&(t={...e,...n})}}catch{}let n=(e,n,r)=>{let i={...t,[e]:{...t[e],[n]:r}};yr(`drying_presets`,JSON.stringify(i))};return Object.entries(t).map(([e,t])=>(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/50`,children:[(0,G.jsx)(`td`,{className:`py-1.5 pr-2 text-white font-medium`,children:e}),(0,G.jsx)(`td`,{className:`py-1 px-1`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-1`,children:[(0,G.jsx)(`input`,{type:`number`,min:30,max:65,value:t.n3f,onChange:t=>n(e,`n3f`,Math.max(1,parseInt(t.target.value)||0)),className:`w-14 px-1.5 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-center text-xs focus:border-amber-500/50 focus:outline-none [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`°C`})]})}),(0,G.jsx)(`td`,{className:`py-1 px-1`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`input`,{type:`number`,min:1,max:24,value:t.n3f_hours,onChange:t=>n(e,`n3f_hours`,Math.max(1,parseInt(t.target.value)||0)),className:`w-14 px-1.5 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-center text-xs focus:border-amber-500/50 focus:outline-none [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`h`})]})}),(0,G.jsx)(`td`,{className:`py-1 px-1`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-1`,children:[(0,G.jsx)(`input`,{type:`number`,min:30,max:85,value:t.n3s,onChange:t=>n(e,`n3s`,Math.max(1,parseInt(t.target.value)||0)),className:`w-14 px-1.5 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-center text-xs focus:border-amber-500/50 focus:outline-none [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`°C`})]})}),(0,G.jsx)(`td`,{className:`py-1 px-1`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`input`,{type:`number`,min:1,max:24,value:t.n3s_hours,onChange:t=>n(e,`n3s_hours`,Math.max(1,parseInt(t.target.value)||0)),className:`w-14 px-1.5 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-center text-xs focus:border-amber-500/50 focus:outline-none [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`h`})]})})]},e))})()})]})})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white font-medium`,children:i(`settings.humidityThresholds`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.humidityThresholdsDescription`)}),(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full text-xs`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`text-bambu-gray border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`th`,{className:`text-left py-1.5`,children:i(`settings.dryingFilament`)}),(0,G.jsx)(`th`,{className:`text-right py-1.5 pr-2`,children:i(`settings.humidityThresholdCol`)})]})}),(0,G.jsx)(`tbody`,{children:(()=>{let e=A.ams_humidity_fair??60,t=[`PLA`,`PETG`,`TPU`,`ABS`,`ASA`,`PA`,`PC`,`PVA`],n={};try{if(A.ams_humidity_thresholds){let e=JSON.parse(A.ams_humidity_thresholds);typeof e==`object`&&e&&(n=e)}}catch{}let r=[{key:`default`,label:i(`settings.humidityThresholdDefault`),value:Number(n.default??e),isDefault:!0},...t.map(t=>({key:t,label:t,value:Number(n[t]??n.default??e),isDefault:!1}))],a=(e,t)=>{if(t.trim()===``){let t={...n};delete t[e],yr(`ams_humidity_thresholds`,JSON.stringify(t));return}let r=parseInt(t,10);if(Number.isNaN(r))return;let i=Math.max(5,Math.min(95,r)),a={...n,[e]:i};yr(`ams_humidity_thresholds`,JSON.stringify(a))};return r.map(e=>{let t=M[e.key],n=t===void 0?String(e.value):t;return(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/50`,children:[(0,G.jsx)(`td`,{className:`py-1.5 pr-2 font-medium ${e.isDefault?`text-bambu-gray italic`:`text-white`}`,children:e.label}),(0,G.jsx)(`td`,{className:`py-1 pr-2`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-1`,children:[(0,G.jsx)(`input`,{type:`number`,min:5,max:95,value:n,onChange:t=>N(n=>({...n,[e.key]:t.target.value})),onBlur:t=>{a(e.key,t.target.value),N(t=>{let n={...t};return delete n[e.key],n})},onKeyDown:e=>{e.key===`Enter`&&e.currentTarget.blur()},className:`w-14 px-1.5 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-center text-xs focus:border-amber-500/50 focus:outline-none [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`%`})]})})]},e.key)})})()})]})})]})]})]}),(0,G.jsxs)(Ld,{id:`card-gcode`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Fs,{className:`w-4 h-4 text-bambu-green`}),i(`settings.gcodeInjection`,`G-code Injection`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.gcodeInjectionDescription`,`Configure custom G-code to inject at the start and/or end of prints for auto-print systems like Farmloop, SwapMod, AutoClear, and Printflow 3D. Snippets are configured per printer model and applied when "Inject G-code" is enabled on a queue item.`)}),(()=>{let e=(()=>{try{return A.gcode_snippets?JSON.parse(A.gcode_snippets):{}}catch{return{}}})(),t=[...new Set((sn||[]).filter(e=>e.model).map(e=>e.model))].sort(),n=(t,n,r)=>{let i={...e};i[t]||(i[t]={start_gcode:``,end_gcode:``}),i[t][n]=r,!i[t].start_gcode&&!i[t].end_gcode&&delete i[t];let a=Object.keys(i).length>0?JSON.stringify(i):``;j(e=>e?{...e,gcode_snippets:a}:null),pr.current=a},r=()=>{pr.current!==null&&(_r.mutate({gcode_snippets:pr.current}),pr.current=null)};return t.length===0?(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic`,children:i(`settings.gcodeInjectionNoPrinters`,`No printers found. Add printers to configure G-code snippets.`)}):t.map(t=>{let a=e[t]||{start_gcode:``,end_gcode:``},o=!!(a.start_gcode||a.end_gcode);return(0,G.jsx)(qp,{defaultOpen:o,className:`border border-bambu-dark-tertiary rounded-lg px-3 py-2`,summary:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-white`,children:t}),o&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-bambu-green/20 text-bambu-green`,children:i(`settings.gcodeConfigured`,`Configured`)})]}),children:(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.gcodeStartLabel`,`Start G-code`)}),(0,G.jsx)(`textarea`,{value:a.start_gcode,onChange:e=>n(t,`start_gcode`,e.target.value),onBlur:r,placeholder:i(`settings.gcodeStartPlaceholder`,`G-code prepended before the print starts...`),rows:3,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-xs font-mono focus:outline-none focus:border-bambu-green resize-y`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.gcodeEndLabel`,`End G-code`)}),(0,G.jsx)(`textarea`,{value:a.end_gcode,onChange:e=>n(t,`end_gcode`,e.target.value),onBlur:r,placeholder:i(`settings.gcodeEndPlaceholder`,`G-code appended after the print ends...`),rows:3,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-xs font-mono focus:outline-none focus:border-bambu-green resize-y`})]})]})},t)})})()]})]})]})]})]}),je===`filament`&&A&&(0,G.jsx)(G.Fragment,{children:(0,G.jsxs)(`div`,{className:`flex flex-col lg:flex-row gap-4 lg:gap-6`,children:[(0,G.jsxs)(`div`,{className:`lg:w-1/3 space-y-3`,children:[(0,G.jsx)(zWe,{}),(0,G.jsxs)(Ld,{id:`card-filamentchecks`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.filamentChecks`)})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.disableFilamentWarnings`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.disableFilamentWarningsDesc`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.disable_filament_warnings,onChange:e=>yr(`disable_filament_warnings`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.preferLowestFilament`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.preferLowestFilamentDesc`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/70 mt-1`,children:i(`settings.preferLowestFilamentBackupNote`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.prefer_lowest_filament,onChange:e=>yr(`prefer_lowest_filament`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]})]})]}),(0,G.jsxs)(Ld,{id:`card-printmodal`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.printModal`)})}),(0,G.jsx)(zd,{className:`space-y-3`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.expandCustomMapping`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.expandCustomMappingDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.per_printer_mapping_expanded??!1,onChange:e=>yr(`per_printer_mapping_expanded`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]})})]}),(0,G.jsxs)(Ld,{id:`card-amsthresholds`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.amsDisplayThresholds`)})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.amsThresholdsDescription`)}),(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-white`,children:[(0,G.jsx)(Zs,{className:`w-4 h-4 text-blue-600 dark:text-blue-400`}),(0,G.jsx)(`span`,{className:`font-medium`,children:i(`settings.humidity`)})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[i(`settings.goodGreen`),` ≤`]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,min:`0`,max:`100`,value:A.ams_humidity_good??40,onChange:e=>yr(`ams_humidity_good`,parseInt(e.target.value)||40),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`%`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[i(`settings.fairOrange`),` ≤`]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,min:`0`,max:`100`,value:A.ams_humidity_fair??60,onChange:e=>yr(`ams_humidity_fair`,parseInt(e.target.value)||60),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`%`})]})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.aboveFairBad`)}),(0,G.jsx)(`p`,{className:`text-xs text-amber-700/80 dark:text-amber-400/70`,children:i(`settings.fairAlsoDryingThreshold`)}),(A.ams_humidity_fair??60)<PGe&&(0,G.jsx)(`p`,{className:`text-xs text-red-600 dark:text-red-400`,children:i(`settings.fairBelowDryingFloor`,{floor:PGe})})]}),(0,G.jsxs)(`div`,{className:`space-y-3 pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-white`,children:[(0,G.jsx)(ju,{className:`w-4 h-4 text-orange-600 dark:text-orange-400`}),(0,G.jsx)(`span`,{className:`font-medium`,children:i(`settings.temperature`)})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[i(`settings.goodBlue`),` ≤`]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,step:`0.5`,min:`0`,max:`60`,value:A.ams_temp_good??28,onChange:e=>yr(`ams_temp_good`,parseFloat(e.target.value)||28),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`°C`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[i(`settings.fairOrange`),` ≤`]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,step:`0.5`,min:`0`,max:`60`,value:A.ams_temp_fair??35,onChange:e=>yr(`ams_temp_fair`,parseFloat(e.target.value)||35),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`°C`})]})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.aboveFairHot`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.tempAlarmThreshold`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,step:`0.5`,min:`0.5`,max:`120`,value:A.ams_temp_alarm??``,placeholder:String(A.ams_temp_fair??35),onChange:e=>{let t=e.target.value.trim(),n=parseFloat(t);yr(`ams_temp_alarm`,t===``||Number.isNaN(n)?null:n)},className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`°C`})]})]}),(A.ams_temp_alarm??1)<=0&&(0,G.jsx)(`p`,{className:`text-xs text-red-600 dark:text-red-400`,children:i(`settings.tempAlarmMustBePositive`)}),(0,G.jsx)(`p`,{className:`text-xs text-amber-700/80 dark:text-amber-400/70`,children:i(`settings.tempAlarmSeparateFromBand`)})]}),(0,G.jsxs)(`div`,{className:`space-y-3 pt-4 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-white`,children:[(0,G.jsx)(Ws,{className:`w-4 h-4 text-purple-600 dark:text-purple-400`}),(0,G.jsx)(`span`,{className:`font-medium`,children:i(`settings.historyRetention`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.keepSensorHistory`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,min:`1`,max:`365`,value:A.ams_history_retention_days??30,onChange:e=>yr(`ams_history_retention_days`,parseInt(e.target.value)||30),className:`w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`common.days`)})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.historyRetentionDescription`)})]})]})]})]}),(0,G.jsxs)(`div`,{className:`lg:w-2/3 space-y-3`,children:[(0,G.jsx)(BWe,{}),(0,G.jsx)(VWe,{})]})]})}),Ye!==null&&(0,G.jsx)(rf,{title:i(`settings.deleteApiKeyTitle`),message:i(`settings.deleteApiKeyMessage`),confirmText:i(`settings.deleteKey`),variant:`danger`,onConfirm:()=>{on.mutate(Ye),Xe(null)},onCancel:()=>Xe(null)}),P&&(0,G.jsx)(JUe,{plug:I,onClose:()=>{F(!1),L(null)}}),R&&(0,G.jsx)(YUe,{sensor:B,printers:sn??[],onClose:()=>{z(!1),V(null)}}),ee&&(0,G.jsx)(QUe,{sensor:ne,locations:un??[],onClose:()=>{te(!1),re(null)}}),ie&&(0,G.jsx)(rWe,{onClose:()=>ae(!1)}),le&&(0,G.jsx)(rf,{title:i(`locationHaSensors.deleteAllConfirm.title`),message:i(`locationHaSensors.deleteAllConfirm.message`,{location:le.locationName,count:le.sensorIds.length}),variant:`danger`,isLoading:pn.isPending,onConfirm:()=>pn.mutate(le.sensorIds),onCancel:()=>ue(null)}),de&&(0,G.jsx)(oWe,{provider:pe,onClose:()=>{fe(!1),me(null)}}),he&&(0,G.jsx)(sWe,{template:he,onClose:()=>ge(null)}),xe&&(0,G.jsx)(lWe,{onClose:()=>Se(!1)}),$e&&(0,G.jsx)(rf,{title:i(`settings.clearNotificationLogs`),message:i(`settings.clearLogsMessage`),confirmText:i(`settings.clearLogs`),variant:`warning`,onConfirm:async()=>{et(!1);try{o((await Z.clearNotificationLogs(30)).message,`success`)}catch{o(i(`settings.toast.clearLogsFailed`),`error`)}},onCancel:()=>et(!1)}),tt&&(0,G.jsx)(rf,{title:i(`settings.resetUiPreferences`),message:i(`settings.resetUiPreferencesMessage`),confirmText:i(`settings.resetPreferences`),variant:`default`,onConfirm:()=>{nt(!1),localStorage.clear(),o(i(`settings.toast.uiPreferencesReset`),`success`),setTimeout(()=>window.location.reload(),1e3)},onCancel:()=>nt(!1)}),rt&&(0,G.jsx)(rf,{title:`Turn All Plugs ${rt===`on`?`On`:`Off`}`,message:`This will turn ${rt===`on`?`ON`:`OFF`} all ${Zt?.filter(e=>e.enabled).length||0} enabled smart plugs. ${rt===`off`?`Any running printers may be affected!`:``}`,confirmText:`Turn All ${rt===`on`?`On`:`Off`}`,variant:rt===`off`?`danger`:`warning`,onConfirm:()=>{let e=rt;it(null),dr.mutate(e)},onCancel:()=>it(null)}),at&&Pn?.release_notes&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,onClick:()=>ot(!1),children:(0,G.jsxs)(Ld,{className:`w-full max-w-2xl max-h-[80vh] flex flex-col`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(Rd,{className:`flex flex-row items-center justify-between shrink-0`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white`,children:[`Release Notes - v`,Pn.latest_version]}),Pn.release_name&&Pn.release_name!==Pn.latest_version&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:Pn.release_name})]}),(0,G.jsx)(`button`,{onClick:()=>ot(!1),className:`p-1 rounded hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(zd,{className:`overflow-y-auto flex-1`,children:(0,G.jsx)(`pre`,{className:`text-sm text-bambu-gray whitespace-pre-wrap font-sans`,children:Pn.release_notes})}),(0,G.jsxs)(`div`,{className:`p-4 border-t border-bambu-dark-tertiary shrink-0 flex gap-2`,children:[Pn.release_url&&(0,G.jsx)(`a`,{href:Pn.release_url,target:`_blank`,rel:`noopener noreferrer`,className:`flex-1`,children:(0,G.jsxs)(Q,{variant:`secondary`,className:`w-full`,children:[(0,G.jsx)(nc,{className:`w-4 h-4`}),`View on GitHub`]})}),(0,G.jsx)(Q,{onClick:()=>ot(!1),className:`flex-1`,children:`Close`})]})]})}),je===`users`&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex gap-1 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`button`,{onClick:()=>Pe(`users`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${Ne===`users`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Hu,{className:`w-4 h-4`}),i(`settings.tabs.users`)]}),(0,G.jsxs)(`button`,{onClick:()=>Pe(`email`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${Ne===`email`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(il,{className:`w-4 h-4`}),i(`settings.tabs.emailAuth`)||`Email Authentication`,Hn?.advanced_auth_enabled&&(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full bg-green-400`})]}),(0,G.jsxs)(`button`,{onClick:()=>Pe(`ldap`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${Ne===`ldap`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(ou,{className:`w-4 h-4`}),i(`settings.tabs.ldap`)||`LDAP`,Un?.ldap_enabled&&(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full bg-green-400`})]}),(0,G.jsxs)(`button`,{onClick:()=>Pe(`twofa`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px flex items-center gap-2 ${Ne===`twofa`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(ou,{className:`w-4 h-4`}),i(`settings.tabs.twoFa`),(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full ${Wn?.totp_enabled||Wn?.email_otp_enabled?`bg-green-400`:`bg-bambu-gray/40`}`})]}),l&&(0,G.jsxs)(`button`,{onClick:()=>Pe(`oidc`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px flex items-center gap-2 ${Ne===`oidc`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(kc,{className:`w-4 h-4`}),i(`settings.tabs.oidc`),(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full ${Gn.some(e=>e.is_enabled)?`bg-green-400`:`bg-bambu-gray/40`}`})]}),l&&(0,G.jsxs)(`button`,{onClick:()=>Pe(`security`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px flex items-center gap-2 ${Ne===`security`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(ou,{className:`w-4 h-4`}),i(`settings.tabs.security`)]})]}),Ne===`users`&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-4`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full flex items-center justify-center ${s?`bg-green-500/20`:`bg-gray-500/20`}`,children:s?(0,G.jsx)(tl,{className:`w-5 h-5 text-green-600 dark:text-green-400`}):(0,G.jsx)(el,{className:`w-5 h-5 text-gray-400`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-white font-medium`,children:i(`settings.authentication`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(s?`settings.authEnabledDescription`:`settings.authDisabledDescription`)})]})]}),s?c?.is_admin&&(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>ct(!0),children:[(0,G.jsx)(el,{className:`w-4 h-4`}),i(`common.disable`)]}):(0,G.jsxs)(Q,{onClick:()=>t(`/setup`),children:[(0,G.jsx)(tl,{className:`w-4 h-4`}),i(`common.enable`)]})]})})}),Hn?.advanced_auth_enabled&&(0,G.jsx)(Ld,{className:`border-blue-500/30 bg-blue-500/5`,children:(0,G.jsx)(zd,{className:`py-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full flex items-center justify-center bg-blue-500/20 flex-shrink-0`,children:(0,G.jsx)(il,{className:`w-5 h-5 text-blue-600 dark:text-blue-400`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-white font-medium`,children:i(`settings.email.advancedAuthEnabled`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:i(`settings.email.advancedAuthEnabledDesc`)})]})]})})}),s&&(0,G.jsxs)(`div`,{className:`grid grid-cols-1 xl:grid-cols-2 gap-6`,children:[(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(Ld,{id:`card-session-policy`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(tl,{className:`w-5 h-5 text-bambu-green`}),i(`settings.sessionPolicy.title`)]})}),(0,G.jsxs)(zd,{children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4`,children:i(`settings.sessionPolicy.description`)}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 sm:grid-cols-4 gap-2 mb-4`,children:[[{hours:24,labelKey:`settings.sessionPolicy.preset24h`},{hours:168,labelKey:`settings.sessionPolicy.preset7d`},{hours:720,labelKey:`settings.sessionPolicy.preset30d`}].map(e=>{let t=(A?.session_max_hours??24)===e.hours;return(0,G.jsx)(`button`,{type:`button`,onClick:()=>yr(`session_max_hours`,e.hours),disabled:s&&!d(`settings:update`),className:`px-3 py-2 rounded-lg text-sm font-medium transition-colors ${t?`bg-bambu-green text-white`:`bg-bambu-dark-tertiary text-bambu-gray hover:text-white hover:bg-bambu-dark`} disabled:opacity-50 disabled:cursor-not-allowed`,children:i(e.labelKey)},e.hours)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`input`,{type:`number`,min:1,max:720,value:A?.session_max_hours??24,onChange:e=>{let t=parseInt(e.target.value,10);Number.isNaN(t)||yr(`session_max_hours`,Math.max(1,Math.min(720,t)))},disabled:s&&!d(`settings:update`),"aria-label":i(`settings.sessionPolicy.customHoursLabel`),className:`w-20 px-2 py-2 bg-bambu-dark-tertiary text-white text-sm rounded-lg border border-bambu-dark-tertiary focus:border-bambu-green focus:outline-none disabled:opacity-50`}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:i(`settings.sessionPolicy.hoursSuffix`)})]})]}),(A?.session_max_hours??24)>24&&(0,G.jsxs)(`div`,{className:`flex items-start gap-2 p-3 rounded-lg bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-600 dark:text-yellow-400 flex-shrink-0 mt-0.5`}),(0,G.jsx)(`p`,{className:`text-xs text-yellow-800 dark:text-yellow-200`,children:i(`settings.sessionPolicy.warning`)})]})]})]}),c&&(0,G.jsxs)(Ld,{children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`h3`,{className:`text-lg font-semibold text-white flex items-center gap-2`,id:`card-currentuser`,children:[(0,G.jsx)(Hu,{className:`w-5 h-5 text-bambu-green`}),i(`settings.currentUser`)]}),c.auth_source!==`ldap`&&(0,G.jsxs)(Q,{size:`sm`,variant:`ghost`,onClick:()=>ut(!0),children:[(0,G.jsx)(Gc,{className:`w-4 h-4`}),i(`settings.changePassword`)]})]})}),(0,G.jsx)(zd,{children:(0,G.jsx)(`div`,{className:`flex items-center justify-between`,children:(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium text-lg`,children:c.username}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-1 mt-2`,children:[c.is_admin&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded-full text-xs font-medium bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-300`,children:i(`settings.admin`)}),c.groups?.map(e=>(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded-full text-xs font-medium ${e.name===`Administrators`?`bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-300`:e.name===`Operators`?`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-300`:e.name===`Viewers`?`bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-300`:`bg-gray-500/20 text-gray-300`}`,children:e.name},e.id))]})]})})})]}),(0,G.jsxs)(Ld,{children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`h3`,{className:`text-lg font-semibold text-white flex items-center gap-2`,id:`card-users`,children:[(0,G.jsx)(Hu,{className:`w-5 h-5 text-bambu-green`}),i(`settings.users`)]}),d(`users:create`)&&(0,G.jsxs)(Q,{size:`sm`,onClick:()=>{vt(!0),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]})},children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`settings.addUser`)]})]})}),(0,G.jsx)(zd,{children:qn?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})}):Kn.length===0?(0,G.jsx)(`p`,{className:`text-center text-bambu-gray py-8`,children:i(`settings.noUsersFound`)}):(0,G.jsx)(`div`,{className:`divide-y divide-bambu-dark-tertiary`,children:Kn.map(e=>(0,G.jsxs)(`div`,{className:`py-3 flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium truncate`,children:e.username}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-1 mt-1`,children:[e.auth_source===`ldap`&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded-full text-xs font-medium bg-cyan-100 dark:bg-cyan-500/20 text-cyan-700 dark:text-cyan-300`,children:`LDAP`}),e.is_admin&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded-full text-xs font-medium bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-300`,children:i(`settings.admin`)}),e.groups?.map(e=>(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded-full text-xs font-medium ${e.name===`Administrators`?`bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-300`:e.name===`Operators`?`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-300`:e.name===`Viewers`?`bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-300`:`bg-gray-500/20 text-gray-300`}`,children:e.name},e.id))]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 ml-4`,children:[d(`users:update`)&&(0,G.jsx)(Q,{size:`sm`,variant:`ghost`,onClick:()=>ir(e),children:(0,G.jsx)(Ol,{className:`w-4 h-4`})}),d(`users:delete`)&&e.id!==c?.id&&(0,G.jsx)(Q,{size:`sm`,variant:`ghost`,onClick:()=>er(e.id),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})]},e.id))})})]})]}),(0,G.jsx)(`div`,{children:(0,G.jsxs)(Ld,{children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`h3`,{className:`text-lg font-semibold text-white flex items-center gap-2`,id:`card-groups`,children:[(0,G.jsx)(ou,{className:`w-5 h-5 text-bambu-green`}),i(`settings.groups`)]}),d(`groups:create`)&&(0,G.jsxs)(Q,{size:`sm`,onClick:()=>t(`/groups/new`),children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`settings.addGroup`)]})]})}),(0,G.jsx)(zd,{children:Yn?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})}):Jn.length===0?(0,G.jsx)(`p`,{className:`text-center text-bambu-gray py-8`,children:i(`settings.noGroupsFound`)}):(0,G.jsx)(`div`,{className:`divide-y divide-bambu-dark-tertiary`,children:Jn.map(e=>(0,G.jsxs)(`div`,{className:`py-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(ou,{className:`w-4 h-4 ${e.name===`Administrators`?`text-purple-600 dark:text-purple-400`:e.name===`Operators`?`text-blue-600 dark:text-blue-400`:e.name===`Viewers`?`text-green-600 dark:text-green-400`:`text-bambu-gray`}`}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:e.name}),e.is_system&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded text-xs bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`,children:i(`settings.system`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[d(`groups:update`)&&(0,G.jsx)(Q,{size:`sm`,variant:`ghost`,onClick:()=>t(`/groups/${e.id}/edit`),children:(0,G.jsx)(Ol,{className:`w-4 h-4`})}),d(`groups:delete`)&&!e.is_system&&(0,G.jsx)(Q,{size:`sm`,variant:`ghost`,onClick:()=>Ft(e.id),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1 ml-6`,children:e.description||i(`settings.noDescription`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-4 mt-2 ml-6 text-xs text-bambu-gray`,children:[(0,G.jsx)(`span`,{children:i(`settings.userCount`,{count:e.user_count})}),(0,G.jsx)(`span`,{children:i(`settings.permissionCount`,{count:e.permissions.length})})]})]},e.id))})})]})})]}),!s&&(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-6`,children:(0,G.jsxs)(`div`,{className:`text-center`,children:[(0,G.jsx)(el,{className:`w-12 h-12 text-bambu-gray mx-auto mb-4`}),(0,G.jsx)(`h3`,{className:`text-lg font-medium text-white mb-2`,children:i(`settings.authDisabledTitle`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4 max-w-md mx-auto`,children:i(`settings.authDisabledMessage`)}),(0,G.jsxs)(`ul`,{className:`space-y-2 text-sm text-bambu-gray mb-6 text-left max-w-xs mx-auto`,children:[(0,G.jsxs)(`li`,{className:`flex items-start gap-2`,children:[(0,G.jsx)(xs,{className:`w-4 h-4 text-bambu-green mt-0.5 flex-shrink-0`}),(0,G.jsx)(`span`,{children:i(`settings.authDisabledFeature1`)})]}),(0,G.jsxs)(`li`,{className:`flex items-start gap-2`,children:[(0,G.jsx)(xs,{className:`w-4 h-4 text-bambu-green mt-0.5 flex-shrink-0`}),(0,G.jsx)(`span`,{children:i(`settings.authDisabledFeature2`)})]}),(0,G.jsxs)(`li`,{className:`flex items-start gap-2`,children:[(0,G.jsx)(xs,{className:`w-4 h-4 text-bambu-green mt-0.5 flex-shrink-0`}),(0,G.jsx)(`span`,{children:i(`settings.authDisabledFeature3`)})]})]}),(0,G.jsxs)(Q,{onClick:()=>t(`/setup`),children:[(0,G.jsx)(tl,{className:`w-4 h-4`}),i(`settings.enableAuthentication`)]})]})})})]}),Ne===`email`&&(0,G.jsx)(`div`,{className:`max-w-5xl`,id:`card-smtp`,children:(0,G.jsx)(mGe,{})}),Ne===`ldap`&&(0,G.jsx)(`div`,{className:`max-w-5xl`,id:`card-ldap`,children:(0,G.jsx)(gGe,{})}),Ne===`twofa`&&(0,G.jsx)(`div`,{className:`max-w-2xl`,children:(0,G.jsx)(yGe,{})}),Ne===`oidc`&&l&&(0,G.jsxs)(`div`,{className:`max-w-3xl space-y-4`,children:[(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`space-y-3 p-4`,children:(0,G.jsxs)(`label`,{className:`flex items-start gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.local_login_enabled===!1,onChange:e=>yr(`local_login_enabled`,!e.target.checked),className:`mt-1 h-4 w-4 rounded border-bambu-dark-tertiary bg-bambu-dark-secondary text-bambu-green focus:ring-bambu-green/50 cursor-pointer`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white`,children:i(`settings.localLogin.disable`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:i(`settings.localLogin.disableHint`)})]})]})})}),(0,G.jsx)(CGe,{})]}),Ne===`security`&&l&&(0,G.jsx)(`div`,{className:`max-w-3xl`,children:(0,G.jsx)(EGe,{})})]}),_t&&!Hn?.advanced_auth_enabled&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black flex items-center justify-center z-50 p-4`,onClick:()=>{vt(!1),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]})},children:(0,G.jsxs)(Ld,{className:`w-full max-w-md`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Hu,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.createUser`)})]}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>{vt(!1),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]})},children:(0,G.jsx)(td,{className:`w-5 h-5`})})]})}),(0,G.jsxs)(zd,{children:[Un?.ldap_enabled&&(0,G.jsxs)(`div`,{className:`mb-4 flex items-center gap-1 p-1 bg-bambu-dark-secondary rounded-lg`,role:`tablist`,"aria-label":i(`users.modal.tabsAriaLabel`),children:[(0,G.jsx)(`button`,{type:`button`,role:`tab`,"aria-selected":yt===`local`,onClick:()=>bt(`local`),className:`flex-1 px-3 py-2 text-sm rounded-md transition-colors ${yt===`local`?`bg-bambu-green/15 text-bambu-green`:`text-bambu-gray hover:text-white`}`,children:i(`users.modal.localTab`)}),(0,G.jsx)(`button`,{type:`button`,role:`tab`,"aria-selected":yt===`ldap`,onClick:()=>bt(`ldap`),className:`flex-1 px-3 py-2 text-sm rounded-md transition-colors ${yt===`ldap`?`bg-bambu-green/15 text-bambu-green`:`text-bambu-gray hover:text-white`}`,children:i(`users.modal.ldapTab`)})]}),yt===`ldap`&&Un?.ldap_enabled?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(IWe,{onSuccess:e=>{vt(!1),bt(`local`),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]}),o(i(`users.toast.ldapProvisioned`,{username:e.username}))}}),(0,G.jsx)(`div`,{className:`mt-6 flex justify-end`,children:(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{vt(!1),bt(`local`),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]})},children:i(`common.cancel`)})})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:i(`settings.username`)}),(0,G.jsx)(`input`,{type:`text`,value:Mt.username,onChange:e=>Nt({...Mt,username:e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:i(`settings.enterUsername`),autoComplete:`username`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:i(`settings.password`)}),(0,G.jsx)(`input`,{type:`password`,value:Mt.password,onChange:e=>Nt({...Mt,password:e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:i(`settings.enterPassword`),autoComplete:`new-password`,minLength:8}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-xs mt-1`,children:i(`settings.passwordRequirements`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:i(`settings.confirmPassword`)}),(0,G.jsx)(`input`,{type:`password`,value:Mt.confirmPassword,onChange:e=>Nt({...Mt,confirmPassword:e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors ${Mt.confirmPassword&&Mt.password!==Mt.confirmPassword?`border-red-500`:`border-bambu-dark-tertiary`}`,placeholder:i(`settings.confirmPasswordPlaceholder`),autoComplete:`new-password`,minLength:6}),Mt.confirmPassword&&Mt.password!==Mt.confirmPassword&&(0,G.jsx)(`p`,{className:`text-red-700 dark:text-red-400 text-xs mt-1`,children:i(`settings.passwordsDoNotMatch`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:i(`settings.groups`)}),(0,G.jsxs)(`div`,{className:`space-y-2 max-h-40 overflow-y-auto p-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg`,children:[Jn.map(e=>(0,G.jsxs)(`label`,{className:`flex items-center gap-3 px-2 py-1.5 rounded hover:bg-bambu-dark-tertiary cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Mt.group_ids.includes(e.id),onChange:()=>ar(e.id),className:`w-4 h-4 rounded border-bambu-gray text-bambu-green focus:ring-bambu-green focus:ring-offset-0 bg-bambu-dark`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:e.name}),e.is_system&&(0,G.jsx)(`span`,{className:`text-xs text-yellow-700 dark:text-yellow-400`,children:i(`settings.systemBadge`)})]},e.id)),Jn.length===0&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.noGroupsAvailable`)})]})]})]}),(0,G.jsxs)(`div`,{className:`mt-6 flex justify-end gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{vt(!1),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]})},children:i(`common.cancel`)}),(0,G.jsx)(Q,{onClick:nr,disabled:Xn.isPending||!Mt.username||!Mt.password||Mt.password!==Mt.confirmPassword||x8(Mt.password)!==null,children:Xn.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),i(`settings.creating`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`settings.createUser`)]})})]})]})]})]})}),_t&&Hn?.advanced_auth_enabled&&(0,G.jsx)(RWe,{formData:Mt,setFormData:Nt,groups:Jn,onClose:()=>{vt(!1),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]})},onCreate:nr,isCreating:Xn.isPending,isCreateButtonDisabled:Xn.isPending||!Mt.username||!Mt.email,ldapEnabled:Un?.ldap_enabled,onLdapProvisioned:e=>{vt(!1),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]}),o(i(`users.toast.ldapProvisioned`,{username:e.username}))}}),xt&&Ct!==null&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black flex items-center justify-center z-50 p-4`,onClick:()=>{St(!1),wt(null),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]})},children:(0,G.jsxs)(Ld,{className:`w-full max-w-md`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Ol,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.editUser`)})]}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>{St(!1),wt(null),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]})},children:(0,G.jsx)(td,{className:`w-5 h-5`})})]})}),(0,G.jsxs)(zd,{children:[(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:[i(`settings.username`),` `,Hn?.advanced_auth_enabled&&(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:`*`})]}),(0,G.jsx)(`input`,{type:`text`,value:Mt.username,onChange:e=>Nt({...Mt,username:e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:i(`settings.enterUsername`),autoComplete:`username`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:[i(`users.form.email`)||`Email`,` `,Hn?.advanced_auth_enabled?(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:`*`}):(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,i(`users.form.optional`)||`optional`,`)`]})]}),(0,G.jsx)(`input`,{type:`email`,value:Mt.email,onChange:e=>Nt({...Mt,email:e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:i(`users.form.emailPlaceholder`)||`user@example.com`,required:Hn?.advanced_auth_enabled})]}),!Hn?.advanced_auth_enabled&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:[i(`users.form.password`)||`Password`,` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,i(`users.form.leaveBlankToKeep`)||`leave blank to keep current`,`)`]})]}),(0,G.jsx)(`input`,{type:`password`,value:Mt.password,onChange:e=>Nt({...Mt,password:e.target.value,confirmPassword:``}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:i(`settings.enterNewPassword`),autoComplete:`new-password`,minLength:8}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-xs mt-1`,children:i(`settings.passwordRequirements`)})]}),Mt.password&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:i(`settings.confirmPassword`)}),(0,G.jsx)(`input`,{type:`password`,value:Mt.confirmPassword,onChange:e=>Nt({...Mt,confirmPassword:e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors ${Mt.confirmPassword&&Mt.password!==Mt.confirmPassword?`border-red-500`:`border-bambu-dark-tertiary`}`,placeholder:i(`settings.confirmNewPassword`),autoComplete:`new-password`,minLength:6}),Mt.confirmPassword&&Mt.password!==Mt.confirmPassword&&(0,G.jsx)(`p`,{className:`text-red-700 dark:text-red-400 text-xs mt-1`,children:i(`settings.passwordsDoNotMatch`)})]})]}),Hn?.advanced_auth_enabled&&(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary/50 border border-bambu-green/20 rounded-lg p-3 space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`users.form.passwordManagedByAdvancedAuth`)||`Password is managed by Advanced Authentication. Use "Reset Password" to send a new password to the user via email.`}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>Ct&&$n.mutate(Ct),disabled:$n.isPending||!Mt.email,className:`w-full`,children:$n.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),i(`users.form.resettingPassword`)||`Resetting Password...`]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ul,{className:`w-4 h-4`}),i(`users.form.resetPassword`)||`Reset Password`]})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:i(`users.form.groups`)||`Groups`}),(0,G.jsx)(`div`,{className:`space-y-2 max-h-40 overflow-y-auto p-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg`,children:Jn.map(e=>(0,G.jsxs)(`label`,{className:`flex items-center gap-3 px-2 py-1.5 rounded hover:bg-bambu-dark-tertiary cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Mt.group_ids.includes(e.id),onChange:()=>ar(e.id),className:`w-4 h-4 rounded border-bambu-gray text-bambu-green focus:ring-bambu-green focus:ring-offset-0 bg-bambu-dark`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:e.name}),e.is_system&&(0,G.jsxs)(`span`,{className:`text-xs text-yellow-700 dark:text-yellow-400`,children:[`(`,i(`users.system`)||`System`,`)`]})]},e.id))})]})]}),(0,G.jsxs)(`div`,{className:`mt-6 flex justify-end gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{St(!1),wt(null),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]})},children:i(`users.modal.cancel`)||`Cancel`}),(0,G.jsx)(Q,{onClick:()=>rr(Ct),disabled:Zn.isPending||!Mt.username||Hn?.advanced_auth_enabled&&!Mt.email||!!(!Hn?.advanced_auth_enabled&&Mt.password&&(Mt.password!==Mt.confirmPassword||x8(Mt.password)!==null)),children:Zn.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),i(`users.modal.saving`)||`Saving...`]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Kl,{className:`w-4 h-4`}),i(`users.modal.saveChanges`)||`Save Changes`]})})]})]})]})}),Tt!==null&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/80 flex items-center justify-center z-50 p-4`,onClick:()=>{Et(null),Ot(null)},children:(0,G.jsxs)(Ld,{className:`w-full max-w-md`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-red-700 dark:text-red-400`,children:[(0,G.jsx)(Nu,{className:`w-5 h-5`}),(0,G.jsx)(`h3`,{className:`text-lg font-semibold`,children:i(`settings.deleteUserTitle`)})]})}),(0,G.jsx)(zd,{className:`space-y-3`,children:At?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-4`,children:(0,G.jsx)(`div`,{className:`animate-spin rounded-full h-6 w-6 border-2 border-bambu-green border-t-transparent`})}):Dt&&Dt.archives+Dt.queue_items+Dt.library_files>0?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.userHasCreated`)}),(0,G.jsxs)(`ul`,{className:`list-disc list-inside text-bambu-gray space-y-1`,children:[Dt.archives>0&&(0,G.jsxs)(`li`,{children:[Dt.archives,` archive`,Dt.archives===1?``:`s`]}),Dt.queue_items>0&&(0,G.jsxs)(`li`,{children:[Dt.queue_items,` queue item`,Dt.queue_items===1?``:`s`]}),Dt.library_files>0&&(0,G.jsxs)(`li`,{children:[Dt.library_files,` library file`,Dt.library_files===1?``:`s`]})]}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm`,children:i(`settings.userItemsQuestion`)}),(0,G.jsxs)(`div`,{className:`flex flex-col gap-2`,children:[(0,G.jsx)(Q,{variant:`danger`,onClick:()=>Qn.mutate({id:Tt,deleteItems:!0}),disabled:Qn.isPending,className:`justify-center`,children:i(`settings.deleteUserAndItems`)}),(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>Qn.mutate({id:Tt,deleteItems:!1}),disabled:Qn.isPending,className:`justify-center`,children:i(`settings.deleteUserKeepItems`)}),(0,G.jsx)(Q,{variant:`ghost`,onClick:()=>{Et(null),Ot(null)},disabled:Qn.isPending,className:`justify-center`,children:i(`common.cancel`)})]})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.deleteUserConfirm`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm`,children:i(`settings.actionCannotBeUndone`)}),(0,G.jsxs)(`div`,{className:`flex gap-2 justify-end`,children:[(0,G.jsx)(Q,{variant:`ghost`,onClick:()=>{Et(null),Ot(null)},disabled:Qn.isPending,children:i(`common.cancel`)}),(0,G.jsx)(Q,{variant:`danger`,onClick:()=>Qn.mutate({id:Tt,deleteItems:!1}),disabled:Qn.isPending,children:i(`settings.deleteUserTitle`)})]})]})})]})}),Pt!==null&&(0,G.jsx)(rf,{title:i(`settings.deleteGroupTitle`),message:i(`settings.deleteGroupMessage`),confirmText:i(`settings.deleteGroup`),variant:`danger`,onConfirm:()=>{tr.mutate(Pt),Ft(null)},onCancel:()=>Ft(null)}),je===`failure-detection`&&(0,G.jsx)(`div`,{id:`card-failure-detection`,children:(0,G.jsx)(dGe,{})}),je===`backup`&&(0,G.jsxs)(`div`,{id:`card-backup`,children:[(0,G.jsxs)(`div`,{className:`mb-4 p-3 bg-amber-50 dark:bg-amber-500/10 border border-amber-300 dark:border-amber-500/30 rounded-lg flex items-start gap-2`,children:[(0,G.jsx)(ou,{className:`text-amber-600 dark:text-amber-400 flex-shrink-0 mt-0.5`,size:16}),(0,G.jsx)(`p`,{className:`text-sm text-amber-700 dark:text-amber-400`,children:i(`backup.includesEncryptionKey`)})]}),(0,G.jsx)(uGe,{})]}),st&&(0,G.jsx)(rf,{title:i(`settings.disableAuthenticationTitle`),message:i(`settings.disableAuthenticationMessage`),confirmText:i(`settings.disableAuthentication`),variant:`danger`,onConfirm:async()=>{try{await Z.disableAuth(),o(i(`settings.toast.authDisabled`),`success`),await u(),ct(!1),window.location.href=`/`}catch(e){o(e instanceof Error?e.message:i(`settings.toast.authDisableFailed`),`error`)}},onCancel:()=>ct(!1)}),lt&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:()=>{ut(!1),ft({currentPassword:``,newPassword:``,confirmPassword:``})},children:(0,G.jsxs)(Ld,{className:`w-full max-w-md`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Gc,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.changePassword`)})]}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>{ut(!1),ft({currentPassword:``,newPassword:``,confirmPassword:``})},children:(0,G.jsx)(td,{className:`w-5 h-5`})})]})}),(0,G.jsxs)(zd,{children:[(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:`Current Password`}),(0,G.jsx)(`input`,{type:`password`,value:dt.currentPassword,onChange:e=>ft({...dt,currentPassword:e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:i(`settings.enterCurrentPassword`),autoComplete:`current-password`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:`New Password`}),(0,G.jsx)(`input`,{type:`password`,value:dt.newPassword,onChange:e=>ft({...dt,newPassword:e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:i(`settings.enterNewPasswordMin6`),autoComplete:`new-password`,minLength:6})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:`Confirm New Password`}),(0,G.jsx)(`input`,{type:`password`,value:dt.confirmPassword,onChange:e=>ft({...dt,confirmPassword:e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors ${dt.confirmPassword&&dt.newPassword!==dt.confirmPassword?`border-red-500`:`border-bambu-dark-tertiary`}`,placeholder:i(`settings.confirmNewPassword`),autoComplete:`new-password`,minLength:6}),dt.confirmPassword&&dt.newPassword!==dt.confirmPassword&&(0,G.jsx)(`p`,{className:`text-red-700 dark:text-red-400 text-xs mt-1`,children:i(`settings.passwordsDoNotMatch`)})]})]}),(0,G.jsxs)(`div`,{className:`mt-6 flex justify-end gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{ut(!1),ft({currentPassword:``,newPassword:``,confirmPassword:``})},children:i(`common.cancel`)}),(0,G.jsx)(Q,{onClick:async()=>{if(dt.newPassword!==dt.confirmPassword){o(i(`settings.toast.passwordsDoNotMatch`),`error`);return}if(dt.newPassword.length<6){o(i(`settings.toast.passwordTooShort`),`error`);return}mt(!0);try{await Z.changePassword(dt.currentPassword,dt.newPassword),o(i(`settings.toast.passwordChanged`),`success`),ut(!1),ft({currentPassword:``,newPassword:``,confirmPassword:``})}catch(e){o(e instanceof Error?e.message:`Failed to change password`,`error`)}finally{mt(!1)}},disabled:pt||!dt.currentPassword||!dt.newPassword||dt.newPassword!==dt.confirmPassword||dt.newPassword.length<6,children:pt?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),i(`settings.changing`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Gc,{className:`w-4 h-4`}),i(`settings.changePassword`)]})})]})]})]})})]})]})]})})}var VGe=/\[(aborted|failed|cancelled):\s*([^\]]*)\]/i;function HGe(e){if(!e)return{isPartial:!1,partialType:null,cleanedDescription:null};let t=e.match(VGe);if(!t)return{isPartial:!1,partialType:null,cleanedDescription:e};let n=e.replace(t[0],``).trim();return{isPartial:!0,partialType:t[1].toLowerCase(),cleanedDescription:n||null}}function UGe(e,t){if(!e)return`-`;let n=ep(e);return n?n.toLocaleString(t):e}function d5(e){let t=e.trim();if(!t)return null;let n=Number.parseFloat(t);return Number.isFinite(n)?n:null}function WGe(e){return`${e.getFullYear()}-${String(e.getMonth()+1).padStart(2,`0`)}-${String(e.getDate()).padStart(2,`0`)}T${String(e.getHours()).padStart(2,`0`)}:${String(e.getMinutes()).padStart(2,`0`)}`}var f5=`w-full px-3 py-2 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded text-white placeholder-bambu-gray focus:outline-none focus:ring-1 focus:ring-bambu-green`,p5=`block text-sm font-medium text-white mb-1`,m5=`px-4 py-3 text-left text-bambu-gray font-medium`,h5=`px-4 py-3 align-top text-white`;function g5({title:e,onClose:t,children:n,size:r=`md`}){let{t:i}=U();return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/70 p-4`,children:(0,G.jsxs)(`div`,{className:`w-full ${r===`sm`?`max-w-xl`:r===`lg`?`max-w-6xl`:`max-w-4xl`} overflow-hidden rounded-lg border border-bambu-dark-tertiary bg-bambu-dark-secondary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between border-b border-bambu-dark-tertiary px-4 py-3`,children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white`,children:e}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:t,children:i(`common.close`,`Close`)})]}),(0,G.jsx)(`div`,{className:`max-h-[75vh] overflow-auto p-4`,children:n})]})})}function GGe(){let{t:e,i18n:t}=U(),{hasPermission:n,user:r}=jd(),{showToast:i}=Gd(),a=co(),o=n(`cost_centers:read_own`),s=n(`cost_centers:read_all`),c=n(`cost_centers:create`),l=n(`cost_centers:modify`),u=n(`cost_centers:modify`),d=n(`cost_centers:modify`),f=n(`cost_centers:modify`),p=n(`users:read_slim`)||n(`users:read`),m=s||c||l||u||d||f,h=o||m,g=h,[_,v]=(0,y.useState)(``),[b,x]=(0,y.useState)(`monthly`),[S,C]=(0,y.useState)(``),[w,T]=(0,y.useState)(null),[E,D]=(0,y.useState)(`deposit`),[O,k]=(0,y.useState)(``),[A,j]=(0,y.useState)(``),[M,N]=(0,y.useState)(null),[P,F]=(0,y.useState)(null),[I,L]=(0,y.useState)(null),[R,z]=(0,y.useState)(!0),[B,V]=(0,y.useState)(0),[ee,te]=(0,y.useState)(`all`),[ne,re]=(0,y.useState)(`all`),[ie,ae]=(0,y.useState)(!1),[oe,se]=(0,y.useState)(!1),[H,ce]=(0,y.useState)(!1),[le,ue]=(0,y.useState)(!1),[de,fe]=(0,y.useState)(`personal`),[pe,me]=(0,y.useState)(null),[he,ge]=(0,y.useState)(``),[_e,ve]=(0,y.useState)(`monthly`),[ye,be]=(0,y.useState)(``),[xe,Se]=(0,y.useState)(!1),[Ce,we]=(0,y.useState)(null),[Te,Ee]=(0,y.useState)(null),[De,Oe]=(0,y.useState)(null),[ke,Ae]=(0,y.useState)(``),[je,Me]=(0,y.useState)(``),[Ne,Pe]=(0,y.useState)(!1),[Fe,Ie]=(0,y.useState)(null),[Le,Re]=(0,y.useState)(null),[ze,Be]=(0,y.useState)(``),[Ve,He]=(0,y.useState)(``),[Ue,We]=(0,y.useState)(WGe(new Date)),[Ge,Ke]=(0,y.useState)(null),[qe,Je]=(0,y.useState)(null),Ye=s||c||l||u||f&&p||d&&p;(0,y.useEffect)(()=>{Ye||fe(`personal`)},[Ye]);let{data:Xe,isLoading:Ze}=K({queryKey:[`finance`,`me`,`balance`],queryFn:Z.getMyBalance,enabled:o}),{data:Qe}=K({queryKey:[`ui-flags`],queryFn:Z.getUiFlags}),{data:$e,isLoading:et}=K({queryKey:[`finance`,`me`,`transactions`,50,B],queryFn:()=>Z.getMyTransactions(50,B),enabled:o}),{data:tt,isLoading:nt}=K({queryKey:[`finance`,`transactions`,50,B],queryFn:()=>Z.getAllTransactions(50,B),enabled:de===`admin`&&s}),{data:rt,isLoading:it}=K({queryKey:[`finance`,`cost-centers`,de],queryFn:()=>de===`admin`&&m?Z.listCostCenters(!0):Z.getMyCostCenters(),enabled:g}),{data:at}=K({queryKey:[`users`,`slim`],queryFn:Z.getUsersSlim,enabled:p&&(g||f||d)}),{data:ot}=K({queryKey:[`finance`,`cost-center`,P],queryFn:()=>Z.getCostCenter(P),enabled:d&&P!=null});(0,y.useEffect)(()=>{!at||at.length===0||w!=null&&at.some(e=>e.id===w)||T(at[0].id)},[at,w]),(0,y.useEffect)(()=>{if(!d)return;let e=(rt||[]).filter(e=>!e.is_private);if(e.length===0){F(null);return}P!=null&&e.some(e=>e.id===P)||F(e[0].id)},[d,rt,P]),(0,y.useEffect)(()=>{if(!d||!at||at.length===0)return;let e=new Set((ot?.members||[]).map(e=>e.user_id)),t=at.find(t=>!e.has(t.id));L(t?t.id:null)},[d,at,ot]),(0,y.useEffect)(()=>{if(!le)return;let e=rt||[];if(e.length===0){me(null);return}pe!=null&&e.some(e=>e.id===pe)||me(e[0].id)},[le,pe,rt]),(0,y.useEffect)(()=>{if(!le||pe==null)return;let e=(rt||[]).find(e=>e.id===pe);if(e){if(ge(e.name),e.budget_mode===`total`){ve(`total`),be(e.total_budget==null?``:String(e.total_budget));return}ve(`monthly`),be(e.monthly_budget==null?``:String(e.monthly_budget))}},[le,pe,rt]);let st=q({mutationFn:()=>Z.createCostCenter({name:_.trim(),total_budget:b===`total`?d5(S):null,monthly_budget:b===`monthly`?d5(S):null,is_active:!0}),onSuccess:()=>{a.invalidateQueries({queryKey:[`finance`]}),v(``),C(``),i(e(`finance.createdCostCenter`,`Cost center created`))},onError:t=>{i(t.message||e(`finance.createCostCenterFailed`,`Failed to create cost center`),`error`)}}),ct=q({mutationFn:({costCenterId:e,value:t,mode:n})=>Z.updateCostCenterBudgets(e,{total_budget:n===`total`?d5(t):null,monthly_budget:n===`monthly`?d5(t):null})}),lt=q({mutationFn:({costCenterId:e,name:t})=>Z.updateCostCenter(e,{name:t})}),ut=q({mutationFn:e=>Z.deleteCostCenter(e)}),dt=q({mutationFn:e=>Z.deleteTransaction(e),onSuccess:()=>{a.invalidateQueries({queryKey:[`finance`]}),i(e(`finance.transactionDeleted`,`Transaction deleted`))},onError:t=>{i(t.message||e(`finance.deleteTransactionFailed`,`Failed to delete transaction`),`error`)}}),ft=q({mutationFn:e=>Z.editTransaction(e.transactionId,e.data),onSuccess:()=>{a.invalidateQueries({queryKey:[`finance`]}),i(e(`finance.transactionEdited`,`Transaction updated and ledger recalculated`)),Se(!1)},onError:t=>{i(t.message||e(`finance.editTransactionFailed`,`Failed to edit transaction`),`error`)}}),pt=q({mutationFn:e=>Z.createManualPrint(e),onSuccess:()=>{a.invalidateQueries({queryKey:[`finance`]}),i(e(`finance.manualPrintCreated`,`Manual print charge added and ledger recalculated`)),Pe(!1),Ie(null),Re(null),Be(``),He(``),We(WGe(new Date))},onError:t=>{i(t.message||e(`finance.manualPrintFailed`,`Failed to create manual print`),`error`)}}),mt=q({mutationFn:e=>Z.depositUserBalance(e.userId,{amount:e.amount,description:e.description,cost_center_id:e.costCenterId??null})}),ht=q({mutationFn:e=>Z.withdrawUserBalance(e.userId,{amount:e.amount,description:e.description,cost_center_id:e.costCenterId??null})}),gt=q({mutationFn:e=>Z.upsertCostCenterMember(e.costCenterId,{user_id:e.userId,can_print:e.canPrint}),onSuccess:()=>{a.invalidateQueries({queryKey:[`finance`]}),i(e(`finance.memberSaved`,`Member saved`))},onError:t=>{i(t.message||e(`finance.memberSaveFailed`,`Failed to save member`),`error`)}}),_t=q({mutationFn:e=>Z.removeCostCenterMember(e.costCenterId,e.userId),onSuccess:()=>{a.invalidateQueries({queryKey:[`finance`]}),i(e(`finance.memberRemoved`,`Member removed`))},onError:t=>{i(t.message||e(`finance.memberRemoveFailed`,`Failed to remove member`),`error`)}}),vt=mt.isPending||ht.isPending,yt=()=>{if(!_.trim()){i(e(`finance.costCenterNameRequired`,`Cost center name is required`),`error`);return}st.mutate()},bt=async()=>{if(pe==null){i(e(`finance.selectCostCenter`,`Please select a cost center`),`error`);return}let t=he.trim();if(!t){i(e(`finance.costCenterNameRequired`,`Cost center name is required`),`error`);return}try{l&&await lt.mutateAsync({costCenterId:pe,name:t}),u&&await ct.mutateAsync({costCenterId:pe,mode:_e,value:ye}),a.invalidateQueries({queryKey:[`finance`]}),i(e(`finance.costCenterUpdated`,`Cost center updated`)),ue(!1)}catch(t){i(t.message||e(`finance.costCenterUpdateFailed`,`Failed to update cost center`),`error`)}},xt=e=>{let t=(rt||[]).find(t=>t.id===e);t&&(me(t.id),ge(t.name),t.budget_mode===`total`?(ve(`total`),be(t.total_budget==null?``:String(t.total_budget))):(ve(`monthly`),be(t.monthly_budget==null?``:String(t.monthly_budget))),ue(!0))},St=async()=>{if(Ge)try{await ut.mutateAsync(Ge.id),a.invalidateQueries({queryKey:[`finance`]}),P===Ge.id&&F(null),i(e(`finance.costCenterDeleted`,`Cost center deleted`))}catch(t){i(t.message||e(`finance.costCenterDeleteFailed`,`Failed to delete cost center`),`error`)}finally{Ke(null)}},Ct=()=>{qe!=null&&dt.mutate(qe,{onSettled:()=>Je(null)})},wt=e=>{we(e.id),Ee(e.user_id),Oe(e.cost_center_id),Ae(String(e.amount)),Me(e.description||``),Se(!0)},Tt=async()=>{if(Ce==null)return;let t=ke?Number.parseFloat(ke):null;if(t!==null&&!Number.isFinite(t)){i(e(`finance.amountInvalid`,`Amount must be a valid number`),`error`);return}ft.mutate({transactionId:Ce,data:{user_id:Te||void 0,cost_center_id:De||void 0,amount:t??void 0,description:je||void 0}})},Et=async()=>{if(Fe==null){i(e(`finance.userRequired`,`Please select a user`),`error`);return}if(Le==null){i(e(`finance.costCenterRequired`,`Please select a cost center`),`error`);return}let t=ze?Number.parseFloat(ze):null;if(t===null||!Number.isFinite(t)){i(e(`finance.amountInvalid`,`Amount must be a valid number`),`error`);return}t=Math.abs(t),pt.mutate({user_id:Fe,cost_center_id:Le,amount:t,description:Ve||void 0,created_at:Ue?new Date(Ue).toISOString():void 0})},Dt=async()=>{if(w==null){i(e(`finance.userRequired`,`Please select a user`),`error`);return}let t=Number.parseFloat(O);if(!Number.isFinite(t)||t<=0){i(e(`finance.amountMustBePositive`,`Amount must be greater than zero`),`error`);return}let n={userId:w,amount:t,description:A.trim()||void 0,costCenterId:M};try{E===`deposit`?await mt.mutateAsync(n):await ht.mutateAsync(n),a.invalidateQueries({queryKey:[`finance`]}),k(``),j(``),i(E===`deposit`?e(`finance.depositSuccess`,`Deposit successful`):e(`finance.withdrawSuccess`,`Withdrawal successful`))}catch(t){i(t.message||e(`finance.adjustmentFailed`,`Wallet adjustment failed`),`error`)}},Ot=()=>{if(P==null){i(e(`finance.selectCostCenter`,`Please select a cost center`),`error`);return}if(I==null){i(e(`finance.noEligibleUsers`,`No eligible users available`),`error`);return}gt.mutate({costCenterId:P,userId:I,canPrint:R})},kt=e=>{P!=null&&_t.mutate({costCenterId:P,userId:e})},At=Pf(Qe?.currency||`USD`),jt=(0,y.useMemo)(()=>[...at||[]].sort((e,t)=>e.username.localeCompare(t.username)),[at]),Mt=(0,y.useMemo)(()=>{let e=new Map;for(let t of jt)e.set(t.id,t.username);return e},[jt]),Nt=(0,y.useMemo)(()=>{let e=new Set((ot?.members||[]).map(e=>e.user_id));return jt.filter(t=>!e.has(t.id))},[jt,ot]),Pt=de===`admin`&&s?tt:$e,Ft=de===`admin`&&s?nt:et,It=(0,y.useMemo)(()=>Pt?.items??[],[Pt?.items]),Lt=Pt?.total??0,Rt=Math.max(1,Math.ceil(Lt/50)),zt=(0,y.useMemo)(()=>It.filter(e=>!(ee!==`all`&&e.transaction_type!==ee||ne!==`all`&&e.cost_center_id!==ne)),[It,ee,ne]),Bt=Math.floor(B/50)+1,Vt=de===`admin`,Ht=t=>t===`deposit`?e(`finance.deposit`):t===`withdraw`?e(`finance.withdraw`):t===`print_charge`?e(`finance.printCharge`):t,Ut=t=>t==null?e(`finance.personal`,`Personal`):Mt.get(t)||(r?.id===t&&r.username?r.username:e(`finance.userWithId`,`User #{{id}}`,{id:t})),Wt=t=>t.budget_limit==null||t.budget_available==null?e(`finance.unlimited`,`Unlimited`):`${At}${t.budget_available.toFixed(2)}/${At}${t.budget_limit.toFixed(2)}`;return h?(0,G.jsxs)(`div`,{className:`p-4 md:p-8 space-y-8`,children:[(0,G.jsxs)(`div`,{className:`flex flex-col gap-4 lg:flex-row lg:items-start lg:justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(qu,{className:`h-6 w-6 text-bambu-green`}),(0,G.jsx)(`h1`,{className:`text-2xl font-bold text-white`,children:e(`finance.title`,`Finance`)})]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-2 max-w-2xl`,children:e(`finance.subtitle`,`Wallet, personal transactions, and cost centers`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1 max-w-2xl`,children:e(`finance.budgetPolicyHint`,`Account balances track costs. Printing is limited only by the selected cost center budget; without a budget, printing is unlimited.`)})]}),(0,G.jsxs)(`div`,{className:`flex flex-col gap-2 lg:items-end`,children:[Ye&&(0,G.jsxs)(`div`,{className:`inline-flex overflow-hidden rounded border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>fe(`personal`),className:`px-3 py-1.5 text-sm ${de===`personal`?`bg-bambu-green text-black font-medium`:`bg-bambu-dark text-bambu-gray`}`,children:e(`finance.personalView`,`Personal view`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>fe(`admin`),className:`px-3 py-1.5 text-sm ${de===`admin`?`bg-bambu-green text-black font-medium`:`bg-bambu-dark text-bambu-gray`}`,children:e(`finance.adminView`,`Admin view`)})]}),de===`admin`&&Ye&&(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-2 lg:justify-end`,children:[c&&(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>ae(!0),children:e(`finance.createCostCenter`,`Create cost center`)}),f&&p&&(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>se(!0),children:e(`finance.adjustWallet`,`Adjust wallet`)}),f&&p&&(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>Pe(!0),children:e(`finance.addManualPrint`,`Add manual print`)}),d&&p&&(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>ce(!0),children:e(`finance.manageMembers`,`Manage cost center members`)})]})]})]}),(0,G.jsxs)(`div`,{className:`grid gap-5 md:grid-cols-2 xl:grid-cols-3`,children:[(0,G.jsxs)(Ld,{children:[(0,G.jsxs)(Rd,{className:`flex flex-row items-center justify-between pb-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e(`finance.currentBalance`,`Personal account balance`)}),(0,G.jsx)(qu,{className:`w-4 h-4 text-bambu-green/90`})]}),(0,G.jsx)(zd,{className:`pt-1`,children:(0,G.jsx)(`p`,{className:`text-3xl font-semibold text-white leading-tight`,children:Ze?e(`common.loading`,`Loading...`):`${At}${(Xe?.balance??0).toFixed(2)}`})})]}),(0,G.jsxs)(Ld,{children:[(0,G.jsxs)(Rd,{className:`flex flex-row items-center justify-between pb-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:de===`admin`?e(`finance.transactions`,`Transactions`):e(`finance.personalTransactions`,`Personal transactions`)}),(0,G.jsx)(As,{className:`w-4 h-4 text-blue-400`})]}),(0,G.jsx)(zd,{className:`pt-1`,children:(0,G.jsx)(`p`,{className:`text-3xl font-semibold text-white leading-tight`,children:Ft?`-`:Lt})})]}),(0,G.jsxs)(Ld,{children:[(0,G.jsxs)(Rd,{className:`flex flex-row items-center justify-between pb-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e(`finance.costCenters`,`Cost centers`)}),(0,G.jsx)(es,{className:`w-4 h-4 text-orange-400`})]}),(0,G.jsx)(zd,{className:`pt-1`,children:(0,G.jsx)(`p`,{className:`text-3xl font-semibold text-white leading-tight`,children:it?`-`:rt?.length??0})})]})]}),ie&&c&&(0,G.jsx)(g5,{title:e(`finance.createCostCenter`,`Create cost center`),size:`md`,onClose:()=>ae(!1),children:(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`grid gap-4 md:grid-cols-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.costCenterName`,`Name`)}),(0,G.jsx)(`input`,{type:`text`,value:_,onChange:e=>v(e.target.value),placeholder:e(`finance.costCenterName`,`Name`),className:f5})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.budgetType`,`Budget type`)}),(0,G.jsxs)(`select`,{value:b,onChange:e=>x(e.target.value),className:f5,children:[(0,G.jsx)(`option`,{value:`monthly`,children:e(`finance.monthlyBudget`,`Monthly budget`)}),(0,G.jsx)(`option`,{value:`total`,children:e(`finance.totalBudget`,`Total budget`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:b===`monthly`?e(`finance.monthlyBudget`,`Monthly budget`):e(`finance.totalBudget`,`Total budget`)}),(0,G.jsx)(`input`,{type:`number`,step:`0.01`,value:S,onChange:e=>C(e.target.value),placeholder:`0.00`,className:f5})]})]}),(0,G.jsx)(Q,{className:`min-w-[180px]`,onClick:yt,disabled:st.isPending,children:st.isPending?e(`common.saving`,`Saving...`):e(`finance.create`,`Create`)})]})}),oe&&f&&p&&(0,G.jsx)(g5,{title:e(`finance.adjustWallet`,`Adjust wallet`),size:`md`,onClose:()=>se(!1),children:(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`grid gap-4 md:grid-cols-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.selectUser`,`Select user`)}),(0,G.jsx)(`select`,{value:w??``,onChange:e=>T(e.target.value?Number(e.target.value):null),className:f5,children:(jt||[]).map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.username},e.id))})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.transactionType`,`Type`)}),(0,G.jsxs)(`select`,{value:E,onChange:e=>D(e.target.value),className:f5,children:[(0,G.jsx)(`option`,{value:`deposit`,children:e(`finance.deposit`,`Deposit`)}),(0,G.jsx)(`option`,{value:`withdraw`,children:e(`finance.withdraw`,`Withdraw`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.amount`,`Amount`)}),(0,G.jsx)(`input`,{type:`number`,step:`0.01`,min:`0`,value:O,onChange:e=>k(e.target.value),placeholder:`0.00`,className:f5})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.costCenters`,`Cost centers`)}),(0,G.jsxs)(`select`,{value:M??``,onChange:e=>N(e.target.value?Number(e.target.value):null),className:f5,children:[(0,G.jsx)(`option`,{value:``,children:e(`finance.noCostCenter`,`No cost center`)}),(rt||[]).map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`common.description`,`Description`)}),(0,G.jsx)(`input`,{type:`text`,value:A,onChange:e=>j(e.target.value),placeholder:e(`finance.descriptionOptional`,`Description (optional)`),className:f5})]}),(0,G.jsx)(Q,{className:`min-w-[180px]`,onClick:Dt,disabled:vt,children:vt?e(`common.saving`,`Saving...`):e(`finance.applyAdjustment`,`Apply adjustment`)})]})}),H&&d&&p&&(0,G.jsx)(g5,{title:e(`finance.manageMembers`,`Manage cost center members`),size:`lg`,onClose:()=>ce(!1),children:(0,G.jsxs)(`div`,{className:`space-y-5`,children:[(0,G.jsxs)(`div`,{className:`grid gap-5 md:grid-cols-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.costCenters`,`Cost centers`)}),(0,G.jsx)(`select`,{value:P??``,onChange:e=>F(e.target.value?Number(e.target.value):null),className:f5,children:(rt||[]).filter(e=>!e.is_private).map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.selectUser`,`Select user`)}),(0,G.jsxs)(`select`,{value:I??``,onChange:e=>L(e.target.value?Number(e.target.value):null),className:f5,children:[(0,G.jsx)(`option`,{value:``,children:e(`finance.selectUser`,`Select user`)}),Nt.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.username},e.id))]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 rounded border border-bambu-dark-tertiary bg-bambu-dark-secondary px-3 py-2`,children:[(0,G.jsx)(`input`,{id:`memberCanPrint`,type:`checkbox`,checked:R,onChange:e=>z(e.target.checked),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsx)(`label`,{htmlFor:`memberCanPrint`,className:`text-sm text-bambu-gray`,children:e(`finance.memberCanPrint`,`Member can print`)})]}),(0,G.jsx)(`div`,{className:`flex items-end`,children:(0,G.jsx)(Q,{className:`min-w-[180px]`,onClick:Ot,disabled:gt.isPending||I==null,children:gt.isPending?e(`common.saving`,`Saving...`):e(`finance.addMember`,`Add member`)})})]}),(0,G.jsx)(`div`,{className:`overflow-auto rounded-lg border border-bambu-dark-tertiary`,children:(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary bg-bambu-dark text-bambu-gray`,children:[(0,G.jsx)(`th`,{className:m5,children:e(`common.name`,`Name`)}),(0,G.jsx)(`th`,{className:m5,children:e(`finance.canPrint`,`Can print`)}),(0,G.jsx)(`th`,{className:m5,children:e(`common.actions`,`Actions`)})]})}),(0,G.jsxs)(`tbody`,{children:[(ot?.members||[]).map(t=>(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/60 text-white`,children:[(0,G.jsx)(`td`,{className:h5,children:jt.find(e=>e.id===t.user_id)?.username||`User ${t.user_id}`}),(0,G.jsx)(`td`,{className:h5,children:t.can_print?e(`common.yes`,`Yes`):e(`common.no`,`No`)}),(0,G.jsx)(`td`,{className:h5,children:(0,G.jsx)(Q,{size:`sm`,variant:`danger`,onClick:()=>kt(t.user_id),disabled:_t.isPending,children:e(`common.remove`,`Remove`)})})]},t.id)),(ot?.members||[]).length===0&&(0,G.jsx)(`tr`,{children:(0,G.jsx)(`td`,{colSpan:3,className:`py-3 text-bambu-gray`,children:e(`finance.noMembers`,`No members assigned.`)})})]})]})})]})}),le&&(l||u)&&(0,G.jsx)(g5,{title:e(`finance.editCostCenter`,`Edit cost center`),size:`md`,onClose:()=>ue(!1),children:(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.costCenterName`,`Name`)}),(0,G.jsx)(`input`,{type:`text`,value:he,onChange:e=>ge(e.target.value),placeholder:e(`finance.costCenterName`,`Name`),className:f5,disabled:!l})]}),(0,G.jsxs)(`div`,{className:`grid gap-4 md:grid-cols-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.budgetType`,`Budget type`)}),(0,G.jsxs)(`select`,{value:_e,onChange:e=>ve(e.target.value),className:f5,disabled:!u,children:[(0,G.jsx)(`option`,{value:`monthly`,children:e(`finance.monthlyBudget`,`Monthly budget`)}),(0,G.jsx)(`option`,{value:`total`,children:e(`finance.totalBudget`,`Total budget`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:_e===`monthly`?e(`finance.monthlyBudget`,`Monthly budget`):e(`finance.totalBudget`,`Total budget`)}),(0,G.jsx)(`input`,{type:`number`,step:`0.01`,value:ye,onChange:e=>be(e.target.value),placeholder:`0.00`,className:f5,disabled:!u})]})]}),(0,G.jsx)(Q,{className:`min-w-[180px]`,onClick:bt,disabled:lt.isPending||ct.isPending||pe==null,children:lt.isPending||ct.isPending?e(`common.saving`,`Saving...`):e(`common.save`,`Save`)})]})}),(0,G.jsxs)(`div`,{className:`grid gap-6 ${g&&o?`xl:grid-cols-2`:``}`,children:[g&&(0,G.jsxs)(Ld,{children:[(0,G.jsxs)(Rd,{children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`finance.myCostCenters`,`My cost centers`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:e(`finance.costCentersHint`,`Review budget limits and keep costs under control`)})]}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[it&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`common.loading`,`Loading...`)}),!it&&(!rt||rt.length===0)&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`finance.noCostCenters`,`No cost centers found.`)}),!it&&rt&&rt.length>0&&(0,G.jsx)(`div`,{className:`overflow-auto rounded-lg border border-bambu-dark-tertiary`,children:(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary bg-bambu-dark text-bambu-gray`,children:[(0,G.jsx)(`th`,{className:m5,children:e(`common.name`,`Name`)}),Vt&&(0,G.jsx)(`th`,{className:m5,children:e(`finance.owner`,`Owner`)}),(0,G.jsx)(`th`,{className:m5,children:e(`finance.balance`,`Account balance`)}),(0,G.jsx)(`th`,{className:m5,children:e(`finance.budget`,`Budget`)}),Vt&&(0,G.jsx)(`th`,{className:m5,children:e(`common.actions`,`Actions`)})]})}),(0,G.jsx)(`tbody`,{children:rt.map(t=>{let n=l||u,r=!t.is_private&&l;return(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/60 text-white`,children:[(0,G.jsx)(`td`,{className:h5,children:t.name}),Vt&&(0,G.jsx)(`td`,{className:h5,children:t.is_private?Ut(t.owner_user_id):e(`finance.shared`,`Shared`)}),(0,G.jsxs)(`td`,{className:h5,children:[At,t.total_balance.toFixed(2)]}),(0,G.jsx)(`td`,{className:h5,children:(0,G.jsxs)(`div`,{className:`flex flex-col gap-0.5`,children:[(0,G.jsx)(`span`,{children:Wt(t)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:t.budget_mode===`monthly`?e(`finance.monthlyBudget`,`Monthly budget`):t.budget_mode===`total`?e(`finance.totalBudget`,`Total budget`):e(`finance.noBudget`,`No budget`)})]})}),Vt&&(0,G.jsx)(`td`,{className:h5,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Q,{size:`sm`,variant:`ghost`,onClick:()=>xt(t.id),disabled:!n,title:n?e(`common.edit`,`Edit`):e(`finance.cannotEditPrivateCostCenter`,`Private cost centers cannot be edited here`),className:`p-1.5 sm:p-2`,children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),r&&(0,G.jsx)(Q,{size:`sm`,variant:`ghost`,onClick:()=>Ke({id:t.id,name:t.name}),disabled:ut.isPending,title:e(`common.delete`,`Delete`),className:`text-red-400 hover:text-red-300 hover:bg-red-500/10 p-1.5 sm:p-2`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})})]},t.id)})})]})})]})]}),o&&(0,G.jsxs)(Ld,{children:[(0,G.jsxs)(Rd,{children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`finance.recentTransactions`,`Recent transactions`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:e(`finance.transactionsHint`,`Filter by type and cost center, then navigate pages`)})]}),(0,G.jsxs)(zd,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`grid gap-4 lg:grid-cols-[minmax(0,1fr)_minmax(0,1fr)_auto] xl:grid-cols-[minmax(0,1fr)_minmax(0,1fr)_minmax(0,1fr)_auto] items-end`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.transactionType`,`Type`)}),(0,G.jsxs)(`select`,{value:ee,onChange:e=>te(e.target.value),className:f5,children:[(0,G.jsx)(`option`,{value:`all`,children:e(`finance.allTypes`)}),(0,G.jsx)(`option`,{value:`deposit`,children:e(`finance.deposit`)}),(0,G.jsx)(`option`,{value:`withdraw`,children:e(`finance.withdraw`)}),(0,G.jsx)(`option`,{value:`print_charge`,children:e(`finance.printCharge`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.costCenters`,`Cost centers`)}),(0,G.jsxs)(`select`,{value:ne,onChange:e=>re(e.target.value===`all`?`all`:Number(e.target.value)),className:f5,children:[(0,G.jsx)(`option`,{value:`all`,children:e(`finance.allCostCenters`)}),(rt||[]).map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]})]}),Ft&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`common.loading`,`Loading...`)}),!Ft&&(!It||It.length===0)&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`finance.noTransactions`,`No transactions available.`)}),!Ft&&It.length>0&&zt.length===0&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`finance.noTransactionsForFilter`,`No transactions match the selected filters.`)}),!Ft&&zt.length>0&&(0,G.jsx)(`div`,{className:`overflow-auto rounded-lg border border-bambu-dark-tertiary`,children:(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary bg-bambu-dark text-bambu-gray`,children:[(0,G.jsx)(`th`,{className:m5,children:e(`common.date`,`Date`)}),Vt&&(0,G.jsx)(`th`,{className:m5,children:e(`common.user`,`User`)}),(0,G.jsx)(`th`,{className:m5,children:e(`finance.costCenter`,`Cost center`)}),(0,G.jsx)(`th`,{className:m5,children:e(`finance.transactionType`,`Type`)}),(0,G.jsx)(`th`,{className:m5,children:e(`common.description`,`Description`)}),(0,G.jsx)(`th`,{className:m5,children:e(`finance.amount`,`Amount`)}),(0,G.jsx)(`th`,{className:m5,children:e(`finance.balanceAfter`,`Balance after`)}),Vt&&(0,G.jsx)(`th`,{className:m5,children:e(`common.actions`,`Actions`)})]})}),(0,G.jsx)(`tbody`,{children:zt.map(n=>{let r=n.amount>=0,i=n.cost_center_id==null?null:(rt||[]).find(e=>e.id===n.cost_center_id),a=Mt.get(n.user_id),o=n.transaction_type===`print_charge`?HGe(n.description??null):null,s=o?.isPartial??!1;return(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/60 text-white`,children:[(0,G.jsx)(`td`,{className:h5,children:UGe(n.created_at,t.language)}),Vt&&(0,G.jsx)(`td`,{className:h5,children:a||e(`finance.userWithId`,`User #{{id}}`,{id:n.user_id})}),(0,G.jsx)(`td`,{className:h5,children:i?.name||`-`}),(0,G.jsx)(`td`,{className:h5,children:(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-2`,children:[(0,G.jsx)(`span`,{children:Ht(n.transaction_type)}),s&&(0,G.jsx)(`span`,{className:`rounded border border-yellow-500/40 bg-yellow-500/10 px-2 py-0.5 text-[11px] text-yellow-300`,children:o&&o.partialType?e(`finance.partialStatus.${o.partialType}`,o.partialType):e(`finance.partial`,`Partial`)})]})}),(0,G.jsx)(`td`,{className:h5,children:(o?.cleanedDescription??n.description)||`-`}),(0,G.jsxs)(`td`,{className:`${h5} ${r?`text-green-400`:`text-red-400`}`,children:[r?`+`:`-`,At,Math.abs(n.amount).toFixed(2)]}),(0,G.jsx)(`td`,{className:h5,children:n.balance_after==null?`-`:`${n.balance_after<0?`-`:``}${At}${Math.abs(n.balance_after).toFixed(2)}`}),Vt&&(0,G.jsx)(`td`,{className:h5,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>wt(n),disabled:ft.isPending,children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{size:`sm`,variant:`danger`,onClick:()=>Je(n.id),disabled:dt.isPending,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})})]},n.id)})})]})}),!Ft&&zt.length>0&&(0,G.jsx)(`div`,{className:`flex justify-end pt-2 lg:pt-0`,children:(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center justify-end gap-2`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>V(0),disabled:B===0||Ft,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,"aria-label":e(`finance.first`,`First`),children:(0,G.jsx)(_s,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>V(e=>Math.max(0,e-50)),disabled:B===0||Ft,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,"aria-label":e(`finance.prev`,`Previous`),children:(0,G.jsx)(hs,{className:`w-4 h-4`})}),(0,G.jsx)(`span`,{className:`text-bambu-gray px-1 whitespace-nowrap`,children:e(`finance.pageNumberOf`,`Page {{page}} of {{total}}`,{page:Bt,total:Rt})}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>V(e=>e+50),disabled:Ft||Bt>=Rt,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,"aria-label":e(`finance.next`,`Next`),children:(0,G.jsx)(ms,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>V(Math.max(0,(Rt-1)*50)),disabled:Ft||Bt>=Rt,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,"aria-label":e(`finance.last`,`Last`),children:(0,G.jsx)(vs,{className:`w-4 h-4`})})]})})]})]}),xe&&Ce!==null&&(0,G.jsx)(g5,{title:e(`finance.editTransaction`,`Edit Transaction`),onClose:()=>Se(!1),size:`md`,children:(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`common.user`,`User`)}),(0,G.jsxs)(`select`,{className:f5,value:Te||``,onChange:e=>Ee(e.target.value?Number(e.target.value):null),children:[(0,G.jsx)(`option`,{value:``,children:e(`finance.selectUser`,`Select user...`)}),jt.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.username},e.id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.costCenter`,`Cost center (optional)`)}),(0,G.jsxs)(`select`,{className:f5,value:De||``,onChange:e=>Oe(e.target.value?Number(e.target.value):null),children:[(0,G.jsx)(`option`,{value:``,children:e(`finance.noCostCenter`,`Personal (no cost center)`)}),(rt||[]).map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.amount`,`Amount`)}),(0,G.jsx)(`input`,{type:`number`,step:`0.01`,className:f5,value:ke,onChange:e=>Ae(e.target.value),placeholder:e(`finance.amountExample`,`e.g., 10.50`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`common.description`,`Description`)}),(0,G.jsx)(`textarea`,{className:`${f5} resize-none`,rows:3,value:je,onChange:e=>Me(e.target.value),placeholder:e(`finance.manualAdjustmentExample`,`e.g., Manual adjustment`)})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 pt-4`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>Se(!1),children:e(`common.cancel`,`Cancel`)}),(0,G.jsx)(Q,{onClick:Tt,disabled:ft.isPending,children:e(`common.save`,`Save`)})]})]})}),Ne&&(0,G.jsx)(g5,{title:e(`finance.addManualPrint`,`Add manual print`),onClose:()=>Pe(!1),size:`md`,children:(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`common.user`,`User`)}),(0,G.jsxs)(`select`,{className:f5,value:Fe||``,onChange:e=>Ie(e.target.value?Number(e.target.value):null),children:[(0,G.jsx)(`option`,{value:``,children:e(`finance.selectUser`,`Select user...`)}),jt.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.username},e.id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.costCenter`,`Cost center`)}),(0,G.jsxs)(`select`,{className:f5,value:Le||``,onChange:e=>Re(e.target.value?Number(e.target.value):null),children:[(0,G.jsx)(`option`,{value:``,children:e(`finance.selectCostCenter`,`Select cost center...`)}),(rt||[]).map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.amount`,`Amount`)}),(0,G.jsx)(`input`,{type:`number`,step:`0.01`,className:f5,value:ze,onChange:e=>Be(e.target.value),placeholder:e(`finance.amountExample`,`e.g., 4.00`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`common.description`,`Description`)}),(0,G.jsx)(`input`,{type:`text`,value:Ve,onChange:e=>He(e.target.value),placeholder:e(`finance.descriptionOptional`,`Description (optional)`),className:f5})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`common.date`,`Date`)}),(0,G.jsx)(`input`,{type:`datetime-local`,value:Ue,onChange:e=>We(e.target.value),className:f5})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 pt-4`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>Pe(!1),children:e(`common.cancel`,`Cancel`)}),(0,G.jsx)(Q,{onClick:Et,disabled:pt.isPending,children:pt.isPending?e(`common.saving`,`Saving...`):e(`finance.addManualPrint`,`Add manual print`)})]})]})}),Ge&&(0,G.jsx)(rf,{title:e(`common.delete`,`Delete`),message:e(`finance.confirmDeleteCostCenter`,`Delete cost center "{{name}}"?`,{name:Ge.name}),confirmText:e(`common.delete`,`Delete`),variant:`danger`,isLoading:ut.isPending,onConfirm:St,onCancel:()=>Ke(null)}),qe!=null&&(0,G.jsx)(rf,{title:e(`finance.deleteTransaction`,`Delete transaction`),message:e(`finance.deleteTransactionConfirm`,`Delete this transaction? Balances will be recalculated automatically.`),confirmText:e(`common.delete`,`Delete`),variant:`danger`,isLoading:dt.isPending,onConfirm:Ct,onCancel:()=>Je(null)})]})]}):(0,G.jsxs)(`div`,{className:`p-4 md:p-8 space-y-6`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(qu,{className:`h-6 w-6 text-bambu-green`}),(0,G.jsx)(`h1`,{className:`text-2xl font-bold text-white`,children:e(`finance.title`,`Finance`)})]}),(0,G.jsx)(`div`,{children:(0,G.jsx)(`p`,{className:`text-bambu-gray mt-2 max-w-2xl`,children:e(`finance.subtitle`,`Wallet, personal transactions, and cost centers`)})}),(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-8 text-center text-bambu-gray`,children:e(`finance.noAccess`,`You do not have permission to view finance data.`)})})]})}var _5={PLA:`GFL99`,"PLA-CF":`GFL98`,"PLA SILK":`GFL96`,"PLA HIGH SPEED":`GFL95`,PETG:`GFG99`,"PETG HF":`GFG96`,"PETG-CF":`GFG98`,PCTG:`GFG97`,ABS:`GFB99`,ASA:`GFB98`,PC:`GFC99`,PA:`GFN99`,"PA-CF":`GFN98`,NYLON:`GFN99`,TPU:`GFU99`,PVA:`GFS99`,HIPS:`GFS98`,PE:`GFP99`,PP:`GFP97`};function KGe(e){let t=(e||``).toUpperCase().trim();return t&&(_5[t]||_5[t.replace(/[-\s]?CF$/,``)]||_5[t.replace(/\+$/,``)]||_5[t.split(/[-\s]/)[0]])||``}function v5(e){let t=e.replace(/@.+$/,``).trim();return t.startsWith(`# `)?t.slice(2).trim():t}var qGe={local:0,orca_cloud:1,cloud:2,builtin:3};function JGe(e){let{localPresets:t,orcaProfiles:n,cloudSettings:r,builtinFilaments:i}=e,a=[],o=e=>e.trim().toLowerCase(),s=new Set,c=new Set,l=new Set,u=(e,t,...n)=>{let r=n.filter(e=>!!e);if(r.some(e=>s.has(e)))return!1;let i=`${e}|${o(t)}`;return c.has(i)?!1:(r.forEach(e=>s.add(e)),c.add(i),l.add(o(t)),!0)};for(let e of t??[]){let t=v5(e.name),n=e.filament_type||qU(t).material;u(`local`,t)&&a.push({id:`local_${e.id}`,name:t,source:`local`,filamentId:KGe(n),filamentType:n||``})}for(let e of n??[]){let t=v5(e.name),n=qU(t).material;u(`orca_cloud`,t,e.setting_id)&&a.push({id:`orca_${e.setting_id}`,name:t,source:`orca_cloud`,filamentId:KGe(n),filamentType:n})}for(let e of r??[]){let t=v5(e.name),n=e.setting_id.startsWith(`GFS`)?tW(e.setting_id):``;u(`cloud`,t,e.setting_id,n||void 0)&&a.push({id:e.setting_id,name:t,source:`cloud`,filamentId:n,filamentType:qU(t).material})}for(let e of i??[]){let t=e.filament_id.startsWith(`GF`)?`GFS${e.filament_id.slice(2)}`:e.filament_id;l.has(o(e.name))||u(`builtin`,e.name,e.filament_id,t)&&a.push({id:`builtin_${e.filament_id}`,name:e.name,source:`builtin`,filamentId:e.filament_id,filamentType:qU(e.name).material})}return a.sort((e,t)=>e.source===t.source?e.name.localeCompare(t.name):qGe[e.source]-qGe[t.source])}async function YGe(e,t){if(e.filamentId)return e.filamentId;if(e.source!==`cloud`||!t)return``;try{return(await t(e.id)).filament_id||``}catch{return``}}var XGe=e=>(Math.trunc(parseFloat(e)*1e3)/1e3).toFixed(3),y5=`HS00`,b5=`HH00`,ZGe=e=>{let t=e.match(/^([A-Z]{2}\d{2})/);return t?t[1]:y5},QGe=e=>ZGe(e)===b5?`HF`:`S`,$Ge=e=>{for(let t of[`High Flow_`,`High Flow `,`Standard_`,`Standard `,`HF_`,`HF `,`S_`,`S `])if(e.startsWith(t))return e.slice(t.length);let t=e.indexOf(`_`);return t>0?e.slice(t+1):e};function x5({profile:e,onEdit:t,onCopy:n,selectionMode:r,isSelected:i,onToggleSelect:a,note:o}){let s=QGe(e.nozzle_id),c=e.nozzle_diameter;return(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[r&&(0,G.jsx)(`button`,{onClick:a,className:`text-bambu-gray hover:text-white transition-colors p-1`,children:i?(0,G.jsx)(_u,{className:`w-4 h-4 text-bambu-green`}):(0,G.jsx)(yu,{className:`w-4 h-4`})}),(0,G.jsxs)(`button`,{onClick:()=>{r&&a?a():t()},className:`flex-1 text-left px-3 py-2 bg-bambu-dark rounded hover:bg-bambu-dark-tertiary transition-colors ${i?`ring-1 ring-bambu-green`:``}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-bambu-green font-mono text-sm font-bold whitespace-nowrap`,children:XGe(e.k_value)}),(0,G.jsx)(`span`,{className:`text-white text-sm truncate flex-1`,title:e.name,children:e.name||`Unnamed`}),o&&(0,G.jsx)(`span`,{title:`Has note`,children:(0,G.jsx)(Su,{className:`w-3 h-3 text-yellow-500`})}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray whitespace-nowrap`,children:[s,` `,c]})]}),o&&(0,G.jsxs)(`div`,{className:`text-xs mt-0.5 truncate text-yellow-500/70`,title:o,children:[`Note: `,o.length>50?o.substring(0,50)+`...`:o]})]}),!r&&n&&(0,G.jsx)(`button`,{onClick:e=>{e.stopPropagation(),n()},className:`text-bambu-gray hover:text-white transition-colors p-1`,title:`Copy profile`,children:(0,G.jsx)(Vs,{className:`w-4 h-4`})})]})}function S5({profile:e,printerId:t,nozzleDiameter:n,existingProfiles:r=[],builtinFilaments:i=[],filamentPresets:a=[],isDualNozzle:o=!1,supportsFlowType:s=!0,initialNote:c=``,initialNoteKey:l=null,onClose:u,onSave:d,onSaveNote:f,hasPermission:p}){let{t:m}=U(),{showToast:h}=Gd(),[g,_]=(0,y.useState)(e?.name||``),[v,b]=(0,y.useState)(e?.k_value?XGe(e.k_value):`0.020`),[x,S]=(0,y.useState)(e?.filament_id||``),[C,w]=(0,y.useState)(e?ZGe(e.nozzle_id):y5),[T,E]=(0,y.useState)(e?.nozzle_diameter||n),[D,O]=(0,y.useState)(e?[e.extruder_id]:o?[0,1]:[0]),[k,A]=(0,y.useState)(!1),[j,M]=(0,y.useState)({current:0,total:0}),[N,P]=(0,y.useState)(c),[F,I]=(0,y.useState)(``),{schedule:L}=oW(),R=y.useMemo(()=>e?.filament_id?i.find(t=>t.filament_id===e.filament_id)?.name||$Ge(r.find(t=>t.filament_id===e.filament_id)?.name||e.name||``)||e.filament_id:``,[e,r,i]),z=y.useMemo(()=>{let e=[[`local`,m(`kProfiles.modal.source.local`)],[`orca_cloud`,m(`kProfiles.modal.source.orcaCloud`)],[`cloud`,m(`kProfiles.modal.source.bambuCloud`)],[`builtin`,m(`kProfiles.modal.source.builtin`)]],t=F.trim().toLowerCase(),n=t?a.filter(e=>e.name.toLowerCase().includes(t)):a;return e.map(([e,t])=>({source:e,label:t,items:n.filter(t=>t.source===e)})).filter(e=>e.items.length>0)},[a,F,m]),B=q({mutationFn:e=>(console.log(`[KProfile] Calling API...`),Z.setKProfile(t,e)),onSuccess:(t,n)=>{if(console.log(`[KProfile] Save success:`,t),h(m(`kProfiles.toast.profileSaved`)),f&&N!==c){let t;t=N===``&&l?l:e&&e.slot_id>0?e.setting_id||`slot_${e.slot_id}_${e.filament_id}_${e.extruder_id}`:`name_${g}_${n.filament_id}`,f(t,N)}A(!0),L(()=>{A(!1),d()},2500)},onError:e=>{console.error(`[KProfile] Save error:`,e),h(e.message,`error`),A(!1)}}),V=q({mutationFn:e=>(console.log(`[KProfile] Deleting profile...`),Z.deleteKProfile(t,e)),onSuccess:e=>{console.log(`[KProfile] Delete success:`,e),h(m(`kProfiles.toast.profileDeleted`)),A(!0),L(()=>{A(!1),u()},4e3)},onError:e=>{console.error(`[KProfile] Delete error:`,e),h(e.message,`error`),A(!1)}}),[ee,te]=(0,y.useState)(!1),ne=()=>{e&&V.mutate({slot_id:e.slot_id,extruder_id:e.extruder_id,nozzle_id:e.nozzle_id,nozzle_diameter:e.nozzle_diameter,filament_id:e.filament_id,setting_id:e.setting_id})};return(0,G.jsxs)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,children:[(0,G.jsxs)(Ld,{className:`w-full max-w-md relative`,children:[k&&(0,G.jsxs)(`div`,{className:`absolute inset-0 bg-bambu-dark-secondary/90 flex flex-col items-center justify-center z-10 rounded-lg`,children:[(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin mb-3`}),(0,G.jsx)(`p`,{className:`text-white font-medium`,children:j.total>1?m(`kProfiles.modal.savingExtruder`,{current:j.current,total:j.total}):m(`kProfiles.modal.syncing`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm mt-1`,children:m(`kProfiles.modal.pleaseWait`)})]}),(0,G.jsxs)(zd,{className:`p-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`h2`,{className:`text-xl font-semibold text-white`,children:m(e?`kProfiles.modal.editTitle`:`kProfiles.modal.addTitle`)}),(0,G.jsx)(`button`,{onClick:u,className:`text-bambu-gray hover:text-white transition-colors`,disabled:k,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`form`,{onSubmit:async n=>{if(n.preventDefault(),o&&!e&&D.length===0){h(m(`kProfiles.toast.selectAtLeastOneExtruder`),`error`);return}let r=parseFloat(v).toFixed(6),i=`${C}-${T}`,s=e&&e.nozzle_id||i,c=e?e.nozzle_diameter:T,l=e?.filament_id||``;if(!e){let e=a.find(e=>e.id===x);if(!e){h(m(`kProfiles.toast.selectFilament`),`error`);return}if(l=await YGe(e,Z.getCloudSettingDetail),!l){h(m(`kProfiles.toast.filamentNotResolvable`,{name:e.name}),`error`);return}}if(e||D.length===1){let t={name:g,k_value:r,filament_id:l,nozzle_id:s,nozzle_diameter:c,extruder_id:e?e.extruder_id:D[0],setting_id:e?.setting_id,slot_id:e?.slot_id??0};console.log(`[KProfile] Saving profile:`,t),B.mutate(t);return}A(!0),M({current:1,total:D.length});let u=D.map(e=>({name:g,k_value:r,filament_id:l,nozzle_id:i,nozzle_diameter:T,extruder_id:e,setting_id:void 0,slot_id:0}));console.log(`[KProfile] Saving ${u.length} profiles in batch:`,u);try{await Z.setKProfilesBatch(t,u),h(m(`kProfiles.toast.profilesSaved`,{count:D.length})),f&&N&&f(`name_${g}_${l}`,N)}catch(e){console.error(`[KProfile] Failed to save batch:`,e),h(m(`kProfiles.toast.failedToSaveBatch`),`error`),A(!1),M({current:0,total:0});return}M({current:D.length,total:D.length}),L(()=>{A(!1),M({current:0,total:0}),d()},3e3)},className:`p-4 space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:m(`kProfiles.modal.profileName`)}),(0,G.jsx)(`input`,{type:`text`,value:g,onChange:e=>_(e.target.value),disabled:!!e,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${e?`opacity-60 cursor-not-allowed`:``}`,placeholder:m(`kProfiles.modal.profileNamePlaceholder`),required:!e})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:m(`kProfiles.modal.kValue`)}),(0,G.jsx)(`input`,{type:`text`,inputMode:`decimal`,value:v,onChange:e=>{let t=e.target.value;(t===``||/^\d*\.?\d*$/.test(t))&&b(t)},onBlur:e=>{let t=parseFloat(e.target.value);isNaN(t)||b((Math.trunc(t*1e3)/1e3).toFixed(3))},className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none font-mono`,placeholder:m(`kProfiles.modal.kValuePlaceholder`),required:!0}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:m(`kProfiles.modal.kValueHelp`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:m(`kProfiles.modal.filament`)}),e?(0,G.jsx)(`div`,{className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white opacity-60`,children:R||e.filament_id}):(0,G.jsxs)(`div`,{className:`border border-bambu-dark-tertiary rounded-lg overflow-hidden`,children:[(0,G.jsxs)(`div`,{className:`relative border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:F,onChange:e=>I(e.target.value),placeholder:m(`kProfiles.modal.searchFilaments`),className:`w-full pl-10 pr-3 py-2 bg-bambu-dark text-white placeholder-bambu-gray focus:outline-none`})]}),(0,G.jsx)(`div`,{className:`max-h-56 overflow-y-auto bg-bambu-dark`,children:z.length===0?(0,G.jsx)(`p`,{className:`px-3 py-3 text-xs text-bambu-gray`,children:a.length===0?m(`kProfiles.modal.noFilamentsHelp`):m(`kProfiles.modal.noFilamentMatches`)}):z.map(e=>(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`sticky top-0 z-10 flex items-center gap-2 px-3 py-1.5 bg-bambu-dark-secondary border-y border-bambu-dark-tertiary`,children:[(0,G.jsx)(`span`,{className:`text-xs font-bold uppercase tracking-wider text-bambu-green`,children:e.label}),(0,G.jsx)(`span`,{className:`text-[10px] text-bambu-gray`,children:e.items.length})]}),e.items.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>{S(e.id),g||_(`${C===b5?`HF`:`S`} ${e.name}`)},className:`w-full text-left px-3 py-1.5 text-sm transition-colors ${x===e.id?`bg-bambu-green/20 text-white`:`text-white hover:bg-bambu-dark-tertiary`}`,children:e.name},e.id))]},e.source))})]})]}),(0,G.jsxs)(`div`,{className:s?`grid grid-cols-2 gap-4`:``,children:[(0,G.jsxs)(`div`,{className:s?``:`hidden`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:m(`kProfiles.modal.flowType`)}),(0,G.jsxs)(`select`,{value:C,onChange:t=>{let n=t.target.value;if(w(n),!e&&x&&!g){let e=a.find(e=>e.id===x);e&&_(`${n===b5?`HF`:`S`} ${e.name}`)}},disabled:!!e,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${e?`opacity-60 cursor-not-allowed`:``}`,children:[(0,G.jsx)(`option`,{value:b5,children:m(`kProfiles.modal.highFlow`)}),(0,G.jsx)(`option`,{value:y5,children:m(`kProfiles.modal.standard`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:m(`kProfiles.modal.nozzleSize`)}),(0,G.jsxs)(`select`,{value:T,onChange:e=>E(e.target.value),disabled:!!e,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${e?`opacity-60 cursor-not-allowed`:``}`,children:[(0,G.jsx)(`option`,{value:`0.2`,children:`0.2mm`}),(0,G.jsx)(`option`,{value:`0.4`,children:`0.4mm`}),(0,G.jsx)(`option`,{value:`0.6`,children:`0.6mm`}),(0,G.jsx)(`option`,{value:`0.8`,children:`0.8mm`})]})]})]}),o&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:m(e?`kProfiles.modal.extruder`:`kProfiles.modal.extruders`)}),e?(0,G.jsx)(`div`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white opacity-60`,children:e.extruder_id===1?m(`kProfiles.modal.left`):m(`kProfiles.modal.right`)}):(0,G.jsxs)(`div`,{className:`flex gap-4`,children:[(0,G.jsxs)(`label`,{className:`flex items-center gap-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:D.includes(1),onChange:e=>{e.target.checked?O([...D,1]):O(D.filter(e=>e!==1))},className:`w-4 h-4 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green focus:ring-offset-0 accent-bambu-green`}),(0,G.jsx)(`span`,{className:`text-white`,children:m(`kProfiles.modal.left`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:D.includes(0),onChange:e=>{e.target.checked?O([...D,0]):O(D.filter(e=>e!==0))},className:`w-4 h-4 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green focus:ring-offset-0 accent-bambu-green`}),(0,G.jsx)(`span`,{className:`text-white`,children:m(`kProfiles.modal.right`)})]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:m(`kProfiles.modal.notes`)}),(0,G.jsx)(`textarea`,{value:N,onChange:e=>P(e.target.value),placeholder:m(`kProfiles.modal.notesPlaceholder`),rows:2,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none resize-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:m(`kProfiles.modal.notesHelp`)})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 pt-4`,children:[e&&(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:()=>te(!0),disabled:V.isPending||k||!p(`kprofiles:delete`),title:p(`kprofiles:delete`)?void 0:m(`kProfiles.permission.noDelete`),className:`text-red-500 hover:bg-red-500/10`,children:V.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Nu,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:u,disabled:k,className:`flex-1`,children:m(`common.cancel`)}),(0,G.jsxs)(Q,{type:`submit`,disabled:B.isPending||k||!p(e?`kprofiles:update`:`kprofiles:create`),title:p(e?`kprofiles:update`:`kprofiles:create`)?void 0:m(e?`kProfiles.permission.noUpdate`:`kProfiles.permission.noCreate`),className:`flex-1`,children:[B.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(wc,{className:`w-4 h-4`}),m(`common.save`)]})]})]})]})]}),ee&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-[60]`,children:(0,G.jsx)(Ld,{className:`w-full max-w-sm`,children:(0,G.jsxs)(zd,{className:`p-6`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mb-4`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full bg-red-500/20 flex items-center justify-center`,children:(0,G.jsx)(Nu,{className:`w-5 h-5 text-red-500`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white`,children:m(`kProfiles.deleteConfirm.title`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:m(`kProfiles.deleteConfirm.cannotUndo`)})]})]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mb-6`,children:m(`kProfiles.deleteConfirm.message`,{name:e?.name})}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>te(!1),className:`flex-1`,children:m(`common.cancel`)}),(0,G.jsxs)(Q,{onClick:()=>{te(!1),ne()},disabled:V.isPending,className:`flex-1 bg-red-500 hover:bg-red-600 text-white`,children:[V.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Nu,{className:`w-4 h-4`}),m(`common.delete`)]})]})]})})})]})}var C5={NOZZLE_DIAMETER:`bambusy_kprofiles_nozzle`,SORT_OPTION:`bambusy_kprofiles_sort`};function eKe(){let{t:e}=U(),{showToast:t}=Gd(),{hasPermission:n}=jd(),[r,i]=(0,y.useState)(null),[a,o]=(0,y.useState)(()=>localStorage.getItem(C5.NOZZLE_DIAMETER)||`0.4`),[s,c]=(0,y.useState)(null),[l,u]=(0,y.useState)(!1),[d,f]=(0,y.useState)(null),[p,m]=(0,y.useState)(``),[h,g]=(0,y.useState)(`all`),[_,v]=(0,y.useState)(`all`),[b,x]=(0,y.useState)(()=>localStorage.getItem(C5.SORT_OPTION)||`name`),[S,C]=(0,y.useState)(!1),[w,T]=(0,y.useState)(new Set),[E,D]=(0,y.useState)(!1),[O,k]=(0,y.useState)(!1),A=(0,y.useCallback)(e=>`${e.slot_id}_${e.extruder_id}`,[]);(0,y.useEffect)(()=>{localStorage.setItem(C5.NOZZLE_DIAMETER,a)},[a]),(0,y.useEffect)(()=>{localStorage.setItem(C5.SORT_OPTION,b)},[b]);let{data:j,isLoading:M}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:N,isLoading:P,isFetching:F,error:I,refetch:L}=K({queryKey:[`kprofiles`,r,a],queryFn:async()=>{console.log(`[KProfiles] Fetching profiles for printer`,r,`nozzle`,a);let e=await Z.getKProfiles(r,a);return console.log(`[KProfiles] Received profiles:`,e?.profiles?.length||0,`profiles`),e},enabled:!!r,retry:!1,staleTime:0,gcTime:0,refetchOnMount:`always`}),{data:R}=K({queryKey:[`builtinFilaments`],queryFn:()=>Z.getBuiltinFilaments(),staleTime:3e5}),{data:z}=K({queryKey:[`filamentIdMap`],queryFn:()=>Z.getFilamentIdMap(),staleTime:3e5}),{data:B}=K({queryKey:[`localPresets`],queryFn:()=>Z.getLocalPresets(),retry:!1}),{data:V}=K({queryKey:[`orcaCloudProfilesForKProfiles`],queryFn:()=>Z.orcaCloudListProfiles(),retry:!1}),{data:ee}=K({queryKey:[`cloudSettings`],queryFn:()=>Z.getCloudSettings(),retry:!1}),{data:te,refetch:ne}=K({queryKey:[`kprofile-notes`,r],queryFn:()=>Z.getKProfileNotes(r),enabled:!!r,staleTime:3e4}),re=I?.message?.includes(`not connected`);(0,y.useEffect)(()=>{if(!r&&j&&j.length>0){let e=j.find(e=>e.is_active);e&&i(e.id)}},[r,j]),(0,y.useEffect)(()=>{if(r){let e=setTimeout(()=>{L()},150);return()=>clearTimeout(e)}},[r,a]);let ie=j?.filter(e=>e.is_active)||[],ae=y.useMemo(()=>{let e=new Map;if(R)for(let t of R)e.set(t.filament_id,t.name);if(z)for(let[t,n]of Object.entries(z))e.has(t)||e.set(t,n);return e},[R,z]),oe=y.useMemo(()=>Array.from(ae.entries()).map(([e,t])=>({filament_id:e,name:t})),[ae]),se=y.useMemo(()=>JGe({localPresets:B?.filament,orcaProfiles:V?.filament,cloudSettings:ee?.filament,builtinFilaments:R}),[B?.filament,V?.filament,ee?.filament,R]),H=y.useCallback(e=>ae.get(e.filament_id)||$Ge(e.name),[ae]),ce=y.useMemo(()=>N?.profiles?N.profiles.filter(e=>{let t=p.toLowerCase(),n=!t||e.name.toLowerCase().includes(t)||e.filament_id.toLowerCase().includes(t),r=h===`all`||h===`left`&&e.extruder_id===1||h===`right`&&e.extruder_id===0,i=_===`all`||_===`hf`&&e.nozzle_id.startsWith(`HH`)||_===`s`&&e.nozzle_id.startsWith(`HS`);return n&&r&&i}).sort((e,t)=>{switch(b){case`k_value`:return parseFloat(e.k_value)-parseFloat(t.k_value);case`filament`:return H(e).localeCompare(H(t));default:return e.name.localeCompare(t.name)}}):[],[N?.profiles,p,h,_,b,H]),le=j?.find(e=>e.id===r),ue=le?.nozzle_count===2,de=le?.supports_nozzle_flow_type??!0;(0,y.useEffect)(()=>{de||v(`all`)},[de]),(0,y.useEffect)(()=>{let e=e=>{e.target instanceof HTMLInputElement||e.target instanceof HTMLTextAreaElement||e.target instanceof HTMLSelectElement||s||l||d||(e.key===`r`||e.key===`R`?(e.preventDefault(),L()):e.key===`n`||e.key===`N`?(e.preventDefault(),u(!0)):e.key===`Escape`&&S&&(e.preventDefault(),C(!1),T(new Set)))};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[s,l,d,S,L]);let fe=(0,y.useCallback)(()=>{if(!N?.profiles||N.profiles.length===0){t(e(`kProfiles.toast.noProfilesToExport`),`error`);return}let n={version:1,exported_at:new Date().toISOString(),printer:le?.name||`Unknown`,nozzle_diameter:a,profiles:N.profiles.map(e=>({name:e.name,k_value:e.k_value,filament_id:e.filament_id,nozzle_id:e.nozzle_id,nozzle_diameter:e.nozzle_diameter,extruder_id:e.extruder_id}))},r=new Blob([JSON.stringify(n,null,2)],{type:`application/json`}),i=URL.createObjectURL(r),o=document.createElement(`a`);o.href=i,o.download=`kprofiles_${le?.name||`printer`}_${a}mm_${new Date().toISOString().split(`T`)[0]}.json`,document.body.appendChild(o),o.click(),document.body.removeChild(o),URL.revokeObjectURL(i),t(e(`kProfiles.toast.exportedProfiles`,{count:N.profiles.length}))},[N?.profiles,le,a,t,e]),pe=(0,y.useCallback)(()=>{let n=document.createElement(`input`);n.type=`file`,n.accept=`.json`,n.onchange=async n=>{let i=n.target.files?.[0];if(i)try{let n=await i.text(),o=JSON.parse(n);if(!o.profiles||!Array.isArray(o.profiles)){t(e(`kProfiles.toast.invalidFileFormat`),`error`);return}let s=0;for(let e of o.profiles)if(!(!e.name||!e.k_value||!e.filament_id))try{await Z.setKProfile(r,{name:e.name,k_value:parseFloat(e.k_value).toFixed(6),filament_id:e.filament_id,nozzle_id:e.nozzle_id||`${y5}-${a}`,nozzle_diameter:e.nozzle_diameter||a,extruder_id:e.extruder_id??0,slot_id:0}),s++,await new Promise(e=>setTimeout(e,500))}catch(t){console.error(`Failed to import profile:`,e.name,t)}t(e(`kProfiles.toast.importedProfiles`,{count:s,total:o.profiles.length})),L()}catch(n){console.error(`Import error:`,n),t(e(`kProfiles.toast.failedToParseImport`),`error`)}},n.click()},[r,a,t,L,e]),me=(0,y.useCallback)(e=>{T(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},[]),he=(0,y.useCallback)(()=>{T(new Set(ce.map(e=>A(e))))},[ce,A]),ge=(0,y.useCallback)(()=>{w.size!==0&&D(!0)},[w.size]),_e=(0,y.useCallback)(async()=>{let n=ce.filter(e=>w.has(A(e)));k(!0);let i=0;for(let e of n)try{await Z.deleteKProfile(r,{slot_id:e.slot_id,extruder_id:e.extruder_id,nozzle_id:e.nozzle_id,nozzle_diameter:e.nozzle_diameter,filament_id:e.filament_id,setting_id:e.setting_id}),i++,await new Promise(e=>setTimeout(e,300))}catch(t){console.error(`Failed to delete profile:`,e.name,t)}t(e(`kProfiles.toast.profilesDeleted`,{count:i})),k(!1),D(!1),C(!1),T(new Set),L()},[r,w,ce,t,L,A,e]),ve=(0,y.useCallback)(e=>{let t=[];return e.setting_id&&t.push(e.setting_id),t.push(`slot_${e.slot_id}_${e.filament_id}_${e.extruder_id}`),t.push(`name_${e.name}_${e.filament_id}`),t},[]),ye=(0,y.useCallback)(async(n,i)=>{if(r)try{await Z.setKProfileNote(r,n,i),ne()}catch(n){console.error(`Failed to save note:`,n),t(e(`kProfiles.toast.failedToSaveNote`),`error`)}},[r,ne,t,e]),be=(0,y.useCallback)(e=>{if(!te?.notes)return{note:``,key:null};let t=ve(e);for(let e of t)if(te.notes[e])return{note:te.notes[e],key:e};return{note:``,key:null}},[te,ve]),xe=(0,y.useCallback)(e=>be(e).note,[be]);return M?(0,G.jsx)(`div`,{className:`flex justify-center py-12`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):!j||j.length===0?(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`py-12 text-center`,children:[(0,G.jsx)(ys,{className:`w-12 h-12 text-bambu-gray mx-auto mb-4`}),(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white mb-2`,children:e(`kProfiles.noPrintersConfigured`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`kProfiles.addPrinterInSettings`)})]})}):ie.length===0?(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`py-12 text-center`,children:[(0,G.jsx)(Ll,{className:`w-12 h-12 text-bambu-gray mx-auto mb-4`}),(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white mb-2`,children:e(`kProfiles.noActivePrinters`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`kProfiles.enablePrinterConnection`)})]})}):(0,G.jsxs)(G.Fragment,{children:[F&&!P&&(0,G.jsxs)(`div`,{className:`fixed inset-0 bg-black/50 flex flex-col items-center justify-center z-40`,children:[(0,G.jsx)(Y,{className:`w-10 h-10 text-bambu-green animate-spin mb-3`}),(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`kProfiles.loadingProfiles`)})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-4 mb-6`,children:[(0,G.jsxs)(`div`,{className:`flex-1 min-w-48`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:e(`kProfiles.printer`)}),(0,G.jsx)(`select`,{value:r||``,onChange:e=>i(parseInt(e.target.value)),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:ie.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))})]}),(0,G.jsxs)(`div`,{className:`w-32`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:e(`kProfiles.nozzle`)}),(0,G.jsxs)(`select`,{value:a,onChange:e=>o(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`0.2`,children:`0.2mm`}),(0,G.jsx)(`option`,{value:`0.4`,children:`0.4mm`}),(0,G.jsx)(`option`,{value:`0.6`,children:`0.6mm`}),(0,G.jsx)(`option`,{value:`0.8`,children:`0.8mm`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-end gap-2`,children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>L(),disabled:F||!n(`kprofiles:read`),title:n(`kprofiles:read`)?void 0:e(`kProfiles.permission.noRead`),children:[(0,G.jsx)(Vl,{className:`w-4 h-4 ${F?`animate-spin`:``}`}),e(`kProfiles.refresh`)]}),(0,G.jsxs)(Q,{onClick:()=>u(!0),disabled:!n(`kprofiles:create`),title:n(`kprofiles:create`)?void 0:e(`kProfiles.permission.noCreate`),children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),e(`kProfiles.addProfile`)]})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-4 mb-4`,children:[(0,G.jsxs)(`div`,{className:`flex-1 min-w-48 relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:p,onChange:e=>m(e.target.value),placeholder:e(`kProfiles.searchPlaceholder`),className:`w-full pl-10 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),ue&&(0,G.jsx)(`div`,{className:`w-36`,children:(0,G.jsxs)(`select`,{value:h,onChange:e=>g(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`all`,children:e(`kProfiles.allExtruders`)}),(0,G.jsx)(`option`,{value:`left`,children:e(`kProfiles.leftOnly`)}),(0,G.jsx)(`option`,{value:`right`,children:e(`kProfiles.rightOnly`)})]})}),de&&(0,G.jsx)(`div`,{className:`w-32`,children:(0,G.jsxs)(`select`,{value:_,onChange:e=>v(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`all`,children:e(`kProfiles.allFlow`)}),(0,G.jsx)(`option`,{value:`hf`,children:e(`kProfiles.hfOnly`)}),(0,G.jsx)(`option`,{value:`s`,children:e(`kProfiles.sOnly`)})]})}),(0,G.jsx)(`div`,{className:`w-32`,children:(0,G.jsxs)(`select`,{value:b,onChange:e=>x(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`name`,children:e(`kProfiles.sortName`)}),(0,G.jsx)(`option`,{value:`k_value`,children:e(`kProfiles.sortKValue`)}),(0,G.jsx)(`option`,{value:`filament`,children:e(`kProfiles.sortFilament`)})]})})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-2 mb-6`,children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:fe,disabled:!N?.profiles?.length||!n(`kprofiles:read`),title:n(`kprofiles:read`)?void 0:e(`kProfiles.permission.noExport`),children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),e(`kProfiles.export`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:pe,disabled:!n(`kprofiles:create`),title:n(`kprofiles:create`)?void 0:e(`kProfiles.permission.noImport`),children:[(0,G.jsx)(Bu,{className:`w-4 h-4`}),e(`kProfiles.import`)]}),(0,G.jsx)(`div`,{className:`flex-1`}),S?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:he,children:[(0,G.jsx)(_u,{className:`w-4 h-4`}),e(`kProfiles.selectAll`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:ge,disabled:w.size===0||!n(`kprofiles:delete`),className:`text-red-500 hover:bg-red-500/10`,title:n(`kprofiles:delete`)?void 0:e(`kProfiles.permission.noDelete`),children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),e(`kProfiles.delete`),` (`,w.size,`)`]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>{C(!1),T(new Set)},children:[(0,G.jsx)(td,{className:`w-4 h-4`}),e(`common.cancel`)]})]}):(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>C(!0),disabled:!ce.length||!n(`kprofiles:delete`),title:n(`kprofiles:delete`)?void 0:e(`kProfiles.permission.noDelete`),children:[(0,G.jsx)(_u,{className:`w-4 h-4`}),e(`kProfiles.select`)]})]}),P?(0,G.jsx)(`div`,{className:`flex justify-center py-12`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):re?(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`py-12 text-center`,children:[(0,G.jsx)(Xu,{className:`w-12 h-12 text-bambu-gray mx-auto mb-4`}),(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white mb-2`,children:e(`kProfiles.printerOffline`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray mb-4`,children:e(`kProfiles.printerOfflineDesc`)}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>L(),children:[(0,G.jsx)(Vl,{className:`w-4 h-4`}),e(`common.refresh`)]})]})}):ce.length>0?ue?(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-bambu-gray mb-2 px-1`,children:e(`kProfiles.leftExtruder`)}),(0,G.jsx)(`div`,{className:`space-y-1`,children:ce.filter(e=>e.extruder_id===1).map(e=>(0,G.jsx)(x5,{profile:e,onEdit:()=>c(e),onCopy:()=>f(e),selectionMode:S,isSelected:w.has(A(e)),onToggleSelect:()=>me(A(e)),note:xe(e)},A(e)))})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-bambu-gray mb-2 px-1`,children:e(`kProfiles.rightExtruder`)}),(0,G.jsx)(`div`,{className:`space-y-1`,children:ce.filter(e=>e.extruder_id===0).map(e=>(0,G.jsx)(x5,{profile:e,onEdit:()=>c(e),onCopy:()=>f(e),selectionMode:S,isSelected:w.has(A(e)),onToggleSelect:()=>me(A(e)),note:xe(e)},A(e)))})]})]}):(0,G.jsx)(`div`,{className:`space-y-1`,children:ce.map(e=>(0,G.jsx)(x5,{profile:e,onEdit:()=>c(e),onCopy:()=>f(e),selectionMode:S,isSelected:w.has(A(e)),onToggleSelect:()=>me(A(e)),note:xe(e)},A(e)))}):p||h!==`all`||_!==`all`?(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`py-12 text-center`,children:[(0,G.jsx)(Zl,{className:`w-12 h-12 text-bambu-gray mx-auto mb-4`}),(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white mb-2`,children:e(`kProfiles.noMatchingProfiles`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`kProfiles.noMatchingProfilesDesc`)})]})}):(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`py-12 text-center`,children:[(0,G.jsx)(wc,{className:`w-12 h-12 text-bambu-gray mx-auto mb-4`}),(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white mb-2`,children:e(`kProfiles.noKProfiles`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray mb-4`,children:e(`kProfiles.noKProfilesDesc`,{diameter:a})}),(0,G.jsxs)(Q,{onClick:()=>u(!0),children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),e(`kProfiles.createFirstProfile`)]})]})}),s&&r&&(()=>{let{note:e,key:t}=be(s);return(0,G.jsx)(S5,{profile:s,printerId:r,nozzleDiameter:a,existingProfiles:N?.profiles,builtinFilaments:oe,filamentPresets:se,isDualNozzle:ue,supportsFlowType:de,initialNote:e,initialNoteKey:t,onSaveNote:ye,hasPermission:n,onClose:()=>{console.log(`[KProfiles] Edit modal onClose - refetching profiles...`),c(null),L()},onSave:()=>{c(null),L()}})})(),l&&r&&(0,G.jsx)(S5,{printerId:r,nozzleDiameter:a,existingProfiles:N?.profiles,builtinFilaments:oe,filamentPresets:se,isDualNozzle:ue,supportsFlowType:de,onSaveNote:ye,hasPermission:n,onClose:()=>{u(!1),L()},onSave:()=>{u(!1),L()}}),d&&r&&(0,G.jsx)(S5,{printerId:r,nozzleDiameter:a,existingProfiles:N?.profiles,builtinFilaments:oe,filamentPresets:se,isDualNozzle:ue,supportsFlowType:de,onSaveNote:ye,hasPermission:n,profile:{...d,slot_id:0,name:`${d.name} (Copy)`},onClose:()=>{f(null),L()},onSave:()=>{f(null),L()}}),E&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,children:(0,G.jsx)(Ld,{className:`w-full max-w-sm`,children:(0,G.jsxs)(zd,{className:`p-6`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mb-4`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full bg-red-500/20 flex items-center justify-center`,children:(0,G.jsx)(Nu,{className:`w-5 h-5 text-red-500`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white`,children:e(`kProfiles.bulkDelete.title`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`kProfiles.bulkDelete.cannotUndo`)})]})]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mb-6`,children:e(`kProfiles.bulkDelete.message`,{count:w.size})}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>D(!1),disabled:O,className:`flex-1`,children:e(`common.cancel`)}),(0,G.jsxs)(Q,{onClick:_e,disabled:O,className:`flex-1 bg-red-500 hover:bg-red-600 text-white`,children:[O?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Nu,{className:`w-4 h-4`}),e(`common.delete`)]})]})]})})})]})}var tKe=[`PLA`,`PETG`,`PCTG`,`ABS`,`ASA`,`TPU`,`PC`,`PA`,`PVA`,`HIPS`,`PP`,`PET`,`NYLON`],nKe={PLA:`E8E8E8`,PETG:`4A90D9`,ABS:`E67E22`,ASA:`D35400`,TPU:`9B59B6`,PC:`BDC3C7`,PA:`2ECC71`,NYLON:`2ECC71`,PVA:`F1C40F`,HIPS:`95A5A6`,PP:`ECF0F1`,PET:`3498DB`};function rKe(e){let t=e.toUpperCase();for(let e of tKe)if(RegExp(`\\b${e}\\b`).test(t))return e;return null}function iKe(e){let t=e.replace(/@.+$/,``).trim(),n=t.toUpperCase();for(let e of tKe){let r=n.indexOf(e);if(r>0){let e=t.slice(0,r).trim();if(e&&e.length>1)return e}}return null}function w5({preset:e,onDelete:t,onExpand:n,isExpanded:r}){let{t:i}=U(),{hasPermission:a}=jd(),o=e.filament_type||rKe(e.name),s=e.filament_vendor||iKe(e.name),c=null,l=!1;if(e.default_filament_colour)try{let t=JSON.parse(e.default_filament_colour),n=Array.isArray(t)?t[0]:t;typeof n==`string`&&/^#?[0-9a-fA-F]{6,8}$/.test(n.replace(`#`,``))&&(c=n.replace(`#`,``).slice(0,6),l=!0)}catch{let t=e.default_filament_colour;/^#?[0-9a-fA-F]{6,8}$/.test(t.replace(`#`,``))&&(c=t.replace(`#`,``).slice(0,6),l=!0)}return!c&&o&&(c=nKe[o.toUpperCase()]||null),(0,G.jsx)(Ld,{className:`bg-bambu-dark border-bambu-dark-tertiary hover:border-bambu-dark-tertiary/80 transition-colors`,children:(0,G.jsxs)(zd,{className:`p-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1`,children:[e.preset_type===`filament`&&(0,G.jsx)(`div`,{className:`w-4 h-4 rounded-full border border-black/20 flex-shrink-0 ${!l&&!c?`opacity-25`:l?``:`opacity-50`}`,style:{backgroundColor:c?`#${c}`:`#666`}}),(0,G.jsx)(`span`,{className:`text-sm font-medium text-white truncate`,children:e.name})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-wrap`,children:[o&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-bambu-green/20 text-bambu-green`,children:o}),s&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:s}),(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`,children:i(`profiles.localProfiles.badge`)})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 flex-shrink-0`,children:[a(`settings:update`)&&(0,G.jsx)(`button`,{onClick:()=>t(e.id),className:`p-1 text-bambu-gray hover:text-red-600 dark:hover:text-red-400 transition-colors`,title:i(`profiles.localProfiles.delete`),children:(0,G.jsx)(Nu,{className:`w-3.5 h-3.5`})}),(0,G.jsx)(`button`,{onClick:()=>n(r?null:e.id),className:`p-1 text-bambu-gray hover:text-white transition-colors`,children:r?(0,G.jsx)(gs,{className:`w-3.5 h-3.5`}):(0,G.jsx)(ps,{className:`w-3.5 h-3.5`})})]})]}),r&&(0,G.jsxs)(`div`,{className:`mt-3 pt-3 border-t border-bambu-dark-tertiary text-xs space-y-1.5`,children:[o&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`profiles.localProfiles.filamentType`)}),(0,G.jsx)(`span`,{className:`text-white`,children:o})]}),s&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`profiles.localProfiles.vendor`)}),(0,G.jsx)(`span`,{className:`text-white`,children:s})]}),e.nozzle_temp_min!=null&&e.nozzle_temp_max!=null&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`profiles.localProfiles.nozzleTemp`)}),(0,G.jsxs)(`span`,{className:`text-white`,children:[e.nozzle_temp_min,`–`,e.nozzle_temp_max,`°C`]})]}),e.filament_cost&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`profiles.localProfiles.cost`)}),(0,G.jsx)(`span`,{className:`text-white`,children:e.filament_cost})]}),e.filament_density&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`profiles.localProfiles.density`)}),(0,G.jsxs)(`span`,{className:`text-white`,children:[e.filament_density,` g/cm³`]})]}),e.pressure_advance&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`profiles.localProfiles.pressureAdvance`)}),(0,G.jsx)(`span`,{className:`text-white`,children:e.pressure_advance})]}),e.compatible_printers&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`profiles.localProfiles.compatiblePrinters`)}),(0,G.jsx)(`span`,{className:`text-white truncate ml-2`,children:(()=>{try{return JSON.parse(e.compatible_printers).join(`, `)}catch{return e.compatible_printers}})()})]}),e.inherits&&e.inherits!==e.name&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`profiles.localProfiles.inheritsFrom`)}),(0,G.jsx)(`span`,{className:`text-white truncate ml-2`,children:e.inherits})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`profiles.localProfiles.source`)}),(0,G.jsx)(`span`,{className:`text-white capitalize`,children:e.source})]})]})]})})}function aKe(){let{t:e}=U(),{hasPermission:t}=jd(),n=co(),{showToast:r}=Gd(),[i,a]=(0,y.useState)(``),[o,s]=(0,y.useState)(null),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(null),{data:f,isLoading:p}=K({queryKey:[`localPresets`],queryFn:()=>Z.getLocalPresets()}),m=q({mutationFn:async e=>{let t=[];for(let n of Array.from(e)){let e=new FormData;e.append(`file`,n),t.push(await Z.importLocalPresets(e))}return t},onSuccess:t=>{n.invalidateQueries({queryKey:[`localPresets`]}),n.invalidateQueries({queryKey:[`slicerPresets`]});let i=0,a=0,o=0;for(let e of t)i+=e.imported,a+=e.skipped,o+=e.errors.length;i>0&&r(e(`profiles.localProfiles.toast.importSuccess`,{count:i})),a>0&&r(e(`profiles.localProfiles.toast.importSkipped`,{count:a}),`warning`),o>0&&r(e(`profiles.localProfiles.toast.importError`,{count:o}),`error`)},onError:e=>{r(e.message,`error`)}}),h=q({mutationFn:e=>Z.deleteLocalPreset(e),onSuccess:(t,i)=>{n.setQueryData([`localPresets`],e=>e&&{filament:e.filament.filter(e=>e.id!==i),printer:e.printer.filter(e=>e.id!==i),process:e.process.filter(e=>e.id!==i)}),n.invalidateQueries({queryKey:[`localPresets`]}),n.invalidateQueries({queryKey:[`slicerPresets`]}),d(null),r(e(`profiles.localProfiles.toast.deleted`))}}),g=(0,y.useCallback)(e=>{!e||e.length===0||m.mutate(e)},[m]),_=(0,y.useCallback)(e=>{e.preventDefault(),l(!1),g(e.dataTransfer.files)},[g]),v=(0,y.useCallback)(e=>{if(!i)return e;let t=i.toLowerCase();return e.filter(e=>e.name.toLowerCase().includes(t)||e.filament_type?.toLowerCase().includes(t)||e.filament_vendor?.toLowerCase().includes(t))},[i]),b=(0,y.useMemo)(()=>v(f?.filament||[]),[f?.filament,v]),x=(0,y.useMemo)(()=>v(f?.printer||[]),[f?.printer,v]),S=(0,y.useMemo)(()=>v(f?.process||[]),[f?.process,v]),C=b.length+x.length+S.length,w=(f?.filament?.length??0)+(f?.printer?.length??0)+(f?.process?.length??0)>0;return p?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-16`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):(0,G.jsxs)(`div`,{className:`space-y-6`,children:[t(`settings:update`)&&(0,G.jsxs)(`div`,{onDragOver:e=>{e.preventDefault(),l(!0)},onDragLeave:()=>l(!1),onDrop:_,className:`relative border-2 border-dashed rounded-lg p-6 text-center transition-colors ${c?`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:[(0,G.jsx)(`input`,{type:`file`,accept:`.json,.zip,.orca_filament,.bbscfg,.bbsflmt`,multiple:!0,className:`absolute inset-0 w-full h-full opacity-0 cursor-pointer`,onChange:e=>g(e.target.files)}),m.isPending?(0,G.jsxs)(`div`,{className:`flex items-center justify-center gap-2`,children:[(0,G.jsx)(Y,{className:`w-5 h-5 text-bambu-green animate-spin`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:e(`profiles.localProfiles.importing`)})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Bu,{className:`w-8 h-8 text-bambu-gray mx-auto mb-2`}),(0,G.jsx)(`p`,{className:`text-sm text-white font-medium`,children:e(`profiles.localProfiles.import`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`profiles.localProfiles.importDesc`)})]})]}),w&&(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:i,onChange:e=>a(e.target.value),placeholder:e(`profiles.localProfiles.search`),className:`w-full pl-9 pr-4 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`})]}),!w&&!p&&(0,G.jsxs)(`div`,{className:`text-center py-12`,children:[(0,G.jsx)(Nc,{className:`w-12 h-12 text-bambu-gray mx-auto mb-3 opacity-50`}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`profiles.localProfiles.noPresets`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/60 mt-1`,children:e(`profiles.localProfiles.importDesc`)})]}),w&&C===0&&!p&&(0,G.jsxs)(`div`,{className:`text-center py-12`,children:[(0,G.jsx)(Zl,{className:`w-12 h-12 text-bambu-gray mx-auto mb-3 opacity-50`}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`profiles.localProfiles.noSearchResults`)})]}),C>0&&(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 lg:grid-cols-3 gap-6`,children:[b.length>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3`,children:[(0,G.jsx)(Xs,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white`,children:e(`profiles.localProfiles.filament`)}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[`(`,b.length,`)`]})]}),(0,G.jsx)(`div`,{className:`space-y-2`,children:b.map(e=>(0,G.jsx)(w5,{preset:e,onDelete:e=>d(e),onExpand:s,isExpanded:o===e.id},e.id))})]}),S.length>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3`,children:[(0,G.jsx)(qc,{className:`w-4 h-4 text-blue-600 dark:text-blue-400`}),(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white`,children:e(`profiles.localProfiles.process`)}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[`(`,S.length,`)`]})]}),(0,G.jsx)(`div`,{className:`space-y-2`,children:S.map(e=>(0,G.jsx)(w5,{preset:e,onDelete:e=>d(e),onExpand:s,isExpanded:o===e.id},e.id))})]}),x.length>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3`,children:[(0,G.jsx)(tu,{className:`w-4 h-4 text-orange-600 dark:text-orange-400`}),(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white`,children:e(`profiles.localProfiles.printer`)}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[`(`,x.length,`)`]})]}),(0,G.jsx)(`div`,{className:`space-y-2`,children:x.map(e=>(0,G.jsx)(w5,{preset:e,onDelete:e=>d(e),onExpand:s,isExpanded:o===e.id},e.id))})]})]}),u!==null&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg p-6 max-w-sm mx-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3`,children:[(0,G.jsx)(ys,{className:`w-5 h-5 text-red-600 dark:text-red-400`}),(0,G.jsx)(`h3`,{className:`text-white font-medium`,children:e(`profiles.localProfiles.deleteConfirmTitle`)})]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4`,children:e(`profiles.localProfiles.deleteConfirm`)}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>d(null),children:e(`profiles.localProfiles.cancel`)}),(0,G.jsxs)(Q,{variant:`danger`,size:`sm`,onClick:()=>h.mutate(u),disabled:h.isPending,children:[h.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Nu,{className:`w-4 h-4`}),e(`profiles.localProfiles.delete`)]})]})]})})]})}function oKe(e){let t=e.match(/@?\s*(?:BBL\s+)?(?:Bambu\s+Lab\s+)?([XPAH][1-9][A-Z]?(?:\s*(?:Carbon|mini))?|H2D)/i),n=e.match(/(\d+\.?\d*)\s*(?:mm\s*)?nozzle|nozzle\s*(\d+\.?\d*)/i),r=e.match(/(\d+\.?\d*)mm\s*(?:Standard|Fine|Extra Fine|Draft|Quality)?/i),i=e.match(/\b(PLA|PETG|ABS|ASA|TPU|PC|PA|PVA|HIPS|PP|PET(?:-?CF)?|PA(?:-?CF)?|PLA(?:-?CF)?)\b/i);return{printer:t?t[1].trim():null,nozzle:n?(n[1]||n[2])+`mm`:null,layerHeight:r?r[1]+`mm`:null,filamentType:i?i[1].toUpperCase():null}}function sKe({settings:e,lastSyncTime:t,onRefresh:n,isRefreshing:r,printers:i,t:a}){let[o,s]=(0,y.useState)(``),[c,l]=(0,y.useState)(`all`),[u,d]=(0,y.useState)(`all`),[f,p]=(0,y.useState)(`all`),[m,h]=(0,y.useState)(`all`),[g,_]=(0,y.useState)(`all`),[v,b]=(0,y.useState)(null),x=(0,y.useMemo)(()=>[...e.filament.map(e=>({...e,type:`filament`})),...e.printer.map(e=>({...e,type:`printer`})),...e.process.map(e=>({...e,type:`process`}))].map(e=>({...e,meta:oKe(e.name)})),[e]),S=(0,y.useMemo)(()=>{let e=new Set,t=new Set,n=new Set;return x.forEach(r=>{r.meta.nozzle&&e.add(r.meta.nozzle),r.meta.filamentType&&t.add(r.meta.filamentType),r.meta.layerHeight&&n.add(r.meta.layerHeight)}),{printers:i.map(e=>({id:e.id.toString(),name:e.name})),nozzles:Array.from(e).sort((e,t)=>parseFloat(e)-parseFloat(t)),filaments:Array.from(t).sort(),layerHeights:Array.from(n).sort((e,t)=>parseFloat(e)-parseFloat(t))}},[x,i]),C=(0,y.useMemo)(()=>u===`all`?null:i.find(e=>e.id.toString()===u)?.model||null,[u,i]),w=(0,y.useMemo)(()=>x.filter(e=>c===`all`||e.type===c).filter(e=>{if(u===`all`||!C)return!0;let t=e.meta.printer?.toLowerCase()||``,n=C.toLowerCase();return t.includes(n)||n.includes(t)}).filter(e=>f===`all`||e.meta.nozzle===f).filter(e=>m===`all`||e.meta.filamentType===m).filter(e=>g===`all`||e.meta.layerHeight===g).filter(e=>o===``||e.name.toLowerCase().includes(o.toLowerCase())).sort((e,t)=>e.name.localeCompare(t.name)),[x,c,u,C,f,m,g,o]),T=()=>{l(`all`),d(`all`),p(`all`),h(`all`),_(`all`),s(``)},E=c!==`all`||u!==`all`||f!==`all`||m!==`all`||g!==`all`||o!==``,D=e.filament.length+e.printer.length+e.process.length,O=e=>w.filter(t=>t.type===e);return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`space-y-4 mb-6`,children:[(0,G.jsxs)(`div`,{className:`flex flex-col sm:flex-row gap-3`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:o,onChange:e=>s(e.target.value),placeholder:a(`profiles.cloudView.searchPlaceholder`),className:`w-full pl-10 pr-4 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray-dark focus:border-bambu-green focus:outline-none`})]}),(0,G.jsx)(`div`,{className:`flex gap-2`,children:(0,G.jsxs)(Q,{variant:`secondary`,onClick:n,disabled:r,children:[(0,G.jsx)(Vl,{className:`w-4 h-4 ${r?`animate-spin`:``}`}),a(`profiles.cloudView.refresh`)]})})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2`,children:[(0,G.jsx)(Cc,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(O5,{label:a(`profiles.cloudView.filters.type`),value:c,options:[{value:`all`,label:a(`profiles.cloudView.filters.all`),count:D},{value:`filament`,label:a(`profiles.cloudView.filters.filament`),count:e.filament.length},{value:`printer`,label:a(`profiles.cloudView.filters.printer`),count:e.printer.length},{value:`process`,label:a(`profiles.cloudView.filters.process`),count:e.process.length}],onChange:e=>l(e)}),S.printers.length>0&&(0,G.jsx)(O5,{label:a(`profiles.cloudView.filters.printer`),value:u,options:[{value:`all`,label:a(`profiles.cloudView.filters.all`)},...S.printers.map(e=>({value:e.id,label:e.name}))],onChange:d}),S.nozzles.length>0&&(0,G.jsx)(O5,{label:a(`profiles.cloudView.filters.nozzle`),value:f,options:[{value:`all`,label:a(`profiles.cloudView.filters.all`)},...S.nozzles.map(e=>({value:e,label:e}))],onChange:p}),S.filaments.length>0&&(c===`all`||c===`filament`)&&(0,G.jsx)(O5,{label:a(`profiles.cloudView.filters.filament`),value:m,options:[{value:`all`,label:a(`profiles.cloudView.filters.all`)},...S.filaments.map(e=>({value:e,label:e}))],onChange:h}),S.layerHeights.length>0&&(c===`all`||c===`process`)&&(0,G.jsx)(O5,{label:a(`profiles.cloudView.filters.layer`),value:g,options:[{value:`all`,label:a(`profiles.cloudView.filters.all`)},...S.layerHeights.map(e=>({value:e,label:e}))],onChange:_}),E&&(0,G.jsx)(`button`,{onClick:T,className:`px-3 py-2 text-sm text-bambu-gray hover:text-white transition-colors`,children:a(`profiles.cloudView.clearFilters`)})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-4 mb-4 text-sm text-bambu-gray`,children:[t&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(js,{className:`w-3 h-3`}),a(`profiles.cloudView.lastSynced`),` `,sp(t.toISOString(),`system`,a)]}),(0,G.jsx)(`span`,{children:a(`profiles.cloudView.showingCount`,{showing:w.length,total:D})})]}),w.length===0?(0,G.jsxs)(`div`,{className:`text-center py-16`,children:[(0,G.jsx)(qc,{className:`w-12 h-12 text-bambu-gray-dark mx-auto mb-4`}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:a(`profiles.cloudView.noPresetsFound`)}),E&&(0,G.jsx)(`button`,{onClick:T,className:`mt-2 text-sm text-bambu-green hover:text-bambu-green-light`,children:a(`profiles.cloudView.clearFilters`)})]}):(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-3 gap-6`,children:[(0,G.jsx)(T5,{icon:(0,G.jsx)(Xs,{className:`w-4 h-4 text-amber-600 dark:text-amber-400`}),title:a(`profiles.cloudView.columns.filament`),presets:O(`filament`),emptyText:a(`profiles.cloudView.noFilamentPresets`),onSelect:b}),(0,G.jsx)(T5,{icon:(0,G.jsx)(tu,{className:`w-4 h-4 text-blue-600 dark:text-blue-400`}),title:a(`profiles.cloudView.columns.process`),presets:O(`process`),emptyText:a(`profiles.cloudView.noProcessPresets`),onSelect:b}),(0,G.jsx)(T5,{icon:(0,G.jsx)(Ll,{className:`w-4 h-4 text-purple-600 dark:text-purple-400`}),title:a(`profiles.cloudView.columns.printer`),presets:O(`printer`),emptyText:a(`profiles.cloudView.noPrinterPresets`),onSelect:b})]}),v&&(0,G.jsx)(lKe,{setting:v,onClose:()=>b(null),t:a})]})}function T5({icon:e,title:t,presets:n,emptyText:r,onSelect:i}){return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3 px-1`,children:[e,(0,G.jsx)(`h3`,{className:`text-sm font-medium text-bambu-gray`,children:t}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray-dark`,children:[`(`,n.length,`)`]})]}),(0,G.jsx)(`div`,{className:`space-y-1 max-h-[calc(100vh-320px)] overflow-y-auto pr-1`,children:n.length===0?(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-dark px-3 py-2`,children:r}):n.map(e=>(0,G.jsx)(cKe,{preset:e,onClick:()=>i(e)},e.setting_id))})]})}function cKe({preset:e,onClick:t}){return(0,G.jsx)(`button`,{onClick:t,className:`w-full text-left px-3 py-2 rounded bg-bambu-dark hover:bg-bambu-dark-tertiary transition-colors`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-white text-sm truncate flex-1`,title:e.name,children:e.name}),e.meta.filamentType&&e.type===`filament`&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray whitespace-nowrap`,children:e.meta.filamentType}),e.meta.layerHeight&&e.type===`process`&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray whitespace-nowrap`,children:e.meta.layerHeight}),e.meta.printer&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray whitespace-nowrap`,children:e.meta.printer})]})})}function lKe({setting:e,onClose:t,t:n}){let{data:r,isLoading:i,error:a}=K({queryKey:[`orcaCloudProfileDetail`,e.setting_id],queryFn:()=>Z.orcaCloudGetProfile(e.setting_id),retry:!1});return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/60 z-50 flex items-center justify-center p-4`,onClick:t,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-2xl max-w-4xl w-full max-h-[90vh] flex flex-col`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h2`,{className:`text-lg font-bold text-white`,children:e.name}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:e.type})]}),(0,G.jsx)(`button`,{onClick:t,className:`text-bambu-gray hover:text-white p-1`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto p-4`,children:i?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-16`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):a?(0,G.jsx)(`p`,{className:`text-center text-bambu-gray py-16`,children:a.message}):r?(0,G.jsx)(`pre`,{className:`text-xs font-mono text-bambu-gray bg-bambu-dark p-3 rounded overflow-x-auto whitespace-pre`,children:JSON.stringify(r.setting,null,2)}):(0,G.jsx)(`p`,{className:`text-center text-bambu-gray py-16`,children:n(`profiles.cloudView.noPresetsFound`)})})]})})}function uKe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),{hasPermission:r}=jd(),i=r(`orca_cloud:auth`),[a,o]=(0,y.useState)(null),[s,c]=(0,y.useState)(5e3),[l,u]=(0,y.useState)(null),{data:d,isLoading:f}=K({queryKey:[`orcaCloudStatus`],queryFn:Z.orcaCloudStatus}),p=!!d?.connected,{data:m,isLoading:h,refetch:g,isRefetching:_,error:v,dataUpdatedAt:b}=K({queryKey:[`orcaCloudProfiles`],queryFn:Z.orcaCloudListProfiles,enabled:p,retry:!1,staleTime:1e3*60*5}),{data:x=[]}=K({queryKey:[`printers`],queryFn:Z.getPrinters,enabled:p}),[S,C]=(0,y.useState)();(0,y.useEffect)(()=>{b&&C(new Date(b))},[b]);let w=()=>{o(null),c(5e3)},T=t=>{t===`access_denied`?u(e(`profiles.orcaCloud.errors.denied`)):t===`expired_token`&&u(e(`profiles.orcaCloud.errors.expired`)),w()},E=q({mutationFn:Z.orcaCloudDeviceStart,onSuccess:e=>{u(null),c(Math.max(1,e.interval)*1e3),o(e)},onError:t=>{u(t.message||e(`profiles.orcaCloud.errors.startFailed`))}}),D=q({mutationFn:Z.orcaCloudLogout,onSuccess:()=>{t.invalidateQueries({queryKey:[`orcaCloudStatus`]}),t.removeQueries({queryKey:[`orcaCloudProfiles`]}),n(e(`profiles.orcaCloud.toast.disconnected`))}}),{data:O,error:k}=K({queryKey:[`orcaCloudDevicePoll`,a?.user_code??`none`],queryFn:Z.orcaCloudDevicePoll,enabled:a!==null,gcTime:0,retry:!1,refetchOnWindowFocus:!1,refetchInterval:a===null?!1:s}),A=(0,y.useRef)(null);return(0,y.useEffect)(()=>{if(!a||!O)return;let r=O.status;if(r===`slow_down`){c(e=>e+5e3);return}r!==`authorization_pending`&&A.current!==r&&(A.current=r,r===`complete`?(w(),t.invalidateQueries({queryKey:[`orcaCloudStatus`]}),t.invalidateQueries({queryKey:[`orcaCloudProfiles`]}),n(e(`profiles.orcaCloud.connectedShort`))):T(r))},[O,a]),(0,y.useEffect)(()=>{a&&k&&(u(e(`profiles.orcaCloud.errors.pollFailed`)),w())},[k,a]),(0,y.useEffect)(()=>{a&&(A.current=null)},[a]),f?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-16`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):(0,G.jsxs)(`div`,{children:[p&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-3 mb-6 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full bg-bambu-green animate-pulse`}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:d?.email?(0,G.jsxs)(G.Fragment,{children:[e(`profiles.orcaCloud.connectedAs`),` `,(0,G.jsx)(`span`,{className:`text-white`,children:d.email})]}):(0,G.jsx)(`span`,{className:`text-white`,children:e(`profiles.orcaCloud.connectedShort`)})})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>D.mutate(),disabled:D.isPending||!i,title:i?void 0:e(`profiles.orcaCloud.noLogoutPermission`),children:[(0,G.jsx)(rl,{className:`w-4 h-4`}),e(`profiles.orcaCloud.logout`)]})]}),p?h?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-16`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):v?(0,G.jsxs)(`div`,{className:`text-center py-16`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray mb-4`,children:v.message}),(0,G.jsx)(Q,{onClick:()=>g(),children:e(`profiles.orcaCloud.retry`)})]}):m?(0,G.jsx)(sKe,{settings:m,lastSyncTime:S,onRefresh:()=>g(),isRefreshing:_,printers:x,t:e}):null:(0,G.jsx)(dKe,{pairing:a,connectError:l,onConnect:()=>E.mutate(),onCancel:w,isStarting:E.isPending,canManage:i,t:e})]})}function dKe({pairing:e,connectError:t,onConnect:n,onCancel:r,isStarting:i,canManage:a,t:o}){return e?(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-8 text-center max-w-md mx-auto`,children:[(0,G.jsx)(Ps,{className:`w-12 h-12 text-bambu-green mx-auto mb-4`}),(0,G.jsx)(`h2`,{className:`text-xl font-bold text-white mb-2`,children:o(`profiles.orcaCloud.device.title`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray mb-6`,children:o(`profiles.orcaCloud.device.instruction`)}),(0,G.jsx)(`p`,{className:`text-xs uppercase tracking-wide text-bambu-gray mb-2`,children:o(`profiles.orcaCloud.device.codeLabel`)}),(0,G.jsx)(`div`,{className:`mb-6 py-3 px-4 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg`,children:(0,G.jsx)(`span`,{className:`text-2xl font-mono font-bold tracking-[0.3em] text-white select-all`,children:e.user_code})}),(0,G.jsx)(`a`,{href:e.verification_uri_complete,target:`_blank`,rel:`noopener noreferrer`,children:(0,G.jsxs)(Q,{className:`w-full mb-3`,children:[(0,G.jsx)(nc,{className:`w-4 h-4`}),o(`profiles.orcaCloud.device.openButton`)]})}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray break-all mb-6`,children:o(`profiles.orcaCloud.device.manualHint`,{url:e.verification_uri})}),(0,G.jsxs)(`div`,{className:`flex items-center justify-center gap-2 text-sm text-bambu-gray mb-4`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin text-bambu-green`}),o(`profiles.orcaCloud.device.waiting`)]}),(0,G.jsx)(`button`,{type:`button`,onClick:r,className:`text-bambu-gray hover:text-white text-sm`,children:o(`profiles.orcaCloud.device.cancel`)})]})}):(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-8 text-center`,children:[(0,G.jsx)(Ps,{className:`w-12 h-12 text-bambu-green mx-auto mb-4`}),(0,G.jsx)(`h2`,{className:`text-xl font-bold text-white mb-2`,children:o(`profiles.orcaCloud.connect.title`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray mb-6 max-w-xl mx-auto`,children:o(`profiles.orcaCloud.connect.description`)}),(0,G.jsxs)(`div`,{className:`max-w-sm mx-auto`,children:[(0,G.jsxs)(Q,{onClick:n,disabled:i||!a,title:a?void 0:o(`profiles.orcaCloud.noConnectPermission`),className:`w-full`,children:[i?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(fs,{className:`w-4 h-4`}),o(`profiles.orcaCloud.connectButton`)]}),t&&(0,G.jsxs)(`p`,{className:`mt-3 text-sm text-red-700 dark:text-red-400 flex items-center justify-center gap-2`,children:[(0,G.jsx)(ys,{className:`w-4 h-4 flex-shrink-0`}),t]})]})]})})}function E5(e,t){let n=`${e} ${t||``}`,r=n.match(/@?\s*(?:BBL\s+)?(?:Bambu\s+Lab\s+)?([XPAH][1-9][A-Z]?(?:\s*(?:Carbon|mini))?|H2D)/i),i=r?r[1].trim():null,a=n.match(/(\d+\.?\d*)\s*(?:mm\s*)?nozzle|nozzle\s*(\d+\.?\d*)/i),o=a?(a[1]||a[2])+`mm`:null,s=n.match(/(\d+\.?\d*)mm\s*(?:Standard|Fine|Extra Fine|Draft|Quality)?/i),c=s?s[1]+`mm`:null,l=n.match(/\b(PLA|PETG|ABS|ASA|TPU|PC|PA|PVA|HIPS|PP|PET(?:-?CF)?|PA(?:-?CF)?|PLA(?:-?CF)?)\b/i);return{printer:i,nozzle:o,layerHeight:c,filamentType:l?l[1].toUpperCase():null}}function D5(e){return/^(P[FPM]US|PF\d|PP\d)/.test(e)}function fKe({onSuccess:e,t}){let{showToast:n}=Gd(),[r,i]=(0,y.useState)(`email`),[a,o]=(0,y.useState)(``),[s,c]=(0,y.useState)(``),[l,u]=(0,y.useState)(``),[d,f]=(0,y.useState)(``),[p,m]=(0,y.useState)(`global`),[h,g]=(0,y.useState)(null),[_,v]=(0,y.useState)(null),[b,x]=(0,y.useState)(!1),S=q({mutationFn:()=>Z.cloudLogin(a,s,p),onSuccess:r=>{if(x(r.reason===`captcha`),r.success)n(t(`profiles.login.toast.loggedIn`)),e();else if(r.reason===`captcha`)return;else r.needs_verification?(g(r.verification_type||`email`),v(r.tfa_key||null),r.verification_type===`totp`?n(t(`profiles.login.toast.enterTotp`)):n(t(`profiles.login.toast.codeSent`)),i(`code`)):n(r.message,`error`)},onError:e=>{x(!1),n(e.message,`error`)}}),C=q({mutationFn:()=>Z.cloudVerify(a,l,_||void 0,p),onSuccess:r=>{x(r.reason===`captcha`),r.success?(n(t(`profiles.login.toast.loggedIn`)),e()):r.reason!==`captcha`&&n(r.message,`error`)},onError:e=>{x(!1),n(e.message,`error`)}}),w=q({mutationFn:()=>Z.cloudSetToken(d,p),onSuccess:()=>{n(t(`profiles.login.toast.tokenSet`)),e()},onError:e=>n(e.message,`error`)}),T=e=>{e.preventDefault(),r===`email`?S.mutate():r===`code`?C.mutate():r===`token`&&w.mutate()},E=S.isPending||C.isPending||w.isPending;return(0,G.jsx)(Ld,{className:`max-w-md mx-auto`,children:(0,G.jsxs)(zd,{children:[(0,G.jsxs)(`div`,{className:`text-center mb-6`,children:[(0,G.jsx)(`div`,{className:`inline-flex items-center justify-center w-12 h-12 rounded-xl bg-bambu-green/20 mb-3`,children:(0,G.jsx)(Ps,{className:`w-6 h-6 text-bambu-green`})}),(0,G.jsx)(`h2`,{className:`text-xl font-semibold text-white`,children:t(`profiles.login.title`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:t(`profiles.login.subtitle`)})]}),b&&r!==`token`&&(0,G.jsx)(`div`,{role:`alert`,className:`mb-4 p-3 rounded-lg border border-amber-500/40 bg-amber-500/10`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2`,children:[(0,G.jsx)(ru,{className:`w-4 h-4 text-amber-400 shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-amber-300`,children:t(`profiles.login.captchaTitle`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:t(`profiles.login.captchaBody`)}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{x(!1),i(`token`)},className:`mt-2 text-xs text-bambu-green hover:underline flex items-center gap-1`,children:[(0,G.jsx)(Gc,{className:`w-3 h-3`}),t(`profiles.login.useToken`)]})]})]})}),(0,G.jsxs)(`form`,{onSubmit:T,className:`space-y-4`,children:[r===`email`&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:t(`profiles.login.email`)}),(0,G.jsx)(`input`,{type:`email`,value:a,onChange:e=>o(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray-dark focus:border-bambu-green focus:outline-none`,placeholder:`your@email.com`,required:!0})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:t(`profiles.login.password`)}),(0,G.jsx)(`input`,{type:`password`,value:s,onChange:e=>c(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray-dark focus:border-bambu-green focus:outline-none`,placeholder:`••••••••`,required:!0})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:t(`profiles.login.region`)}),(0,G.jsxs)(`select`,{value:p,onChange:e=>m(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`global`,children:t(`profiles.login.regionGlobal`)}),(0,G.jsx)(`option`,{value:`china`,children:t(`profiles.login.regionChina`)})]})]})]}),r===`code`&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:t(h===`totp`?`profiles.login.totpCode`:`profiles.login.verificationCode`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:h===`totp`?t(`profiles.login.enterTotpHint`):t(`profiles.login.checkEmail`,{email:a})}),(0,G.jsx)(`input`,{type:`text`,value:l,onChange:e=>u(e.target.value.replace(/\D/g,``).slice(0,6)),className:`w-full px-3 py-3 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-center text-2xl tracking-widest font-mono focus:border-bambu-green focus:outline-none`,placeholder:`000000`,maxLength:6,required:!0})]}),r===`token`&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:t(`profiles.login.accessToken`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:t(`profiles.login.accessTokenHint`)}),(0,G.jsx)(`textarea`,{value:d,onChange:e=>f(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-xs font-mono placeholder-bambu-gray-dark focus:border-bambu-green focus:outline-none resize-none`,placeholder:`eyJ...`,rows:4,required:!0})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:t(`profiles.login.region`)}),(0,G.jsxs)(`select`,{value:p,onChange:e=>m(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`global`,children:t(`profiles.login.regionGlobal`)}),(0,G.jsx)(`option`,{value:`china`,children:t(`profiles.login.regionChina`)})]})]})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 max-[550px]:flex-wrap max-[550px]:items-center`,children:[r===`code`&&(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:()=>i(`email`),className:`flex-1`,children:t(`profiles.login.back`)}),(0,G.jsxs)(Q,{type:`submit`,disabled:E,className:`flex-1`,children:[E?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(nl,{className:`w-4 h-4`}),t(r===`email`?`profiles.login.loginButton`:r===`code`?`profiles.login.verifyButton`:`profiles.login.setTokenButton`)]})]}),r===`email`&&(0,G.jsx)(`div`,{className:`pt-4 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`button`,{type:`button`,onClick:()=>i(`token`),className:`text-sm text-bambu-gray hover:text-white flex items-center gap-2 transition-colors`,children:[(0,G.jsx)(Gc,{className:`w-4 h-4`}),t(`profiles.login.useToken`)]})}),r===`token`&&(0,G.jsx)(`div`,{className:`pt-4 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`button`,{type:`button`,onClick:()=>i(`email`),className:`text-sm text-bambu-gray hover:text-white flex items-center gap-2 transition-colors`,children:[(0,G.jsx)(nl,{className:`w-4 h-4`}),t(`profiles.login.useEmail`)]})})]})]})})}function O5({label:e,value:t,options:n,onChange:r}){let[i,a]=(0,y.useState)(!1),o=n.find(e=>e.value===t);return(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`button`,{onClick:()=>a(!i),className:`flex items-center gap-2 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-sm text-white hover:border-bambu-gray-dark transition-colors`,children:[(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[e,`:`]}),(0,G.jsx)(`span`,{children:o?.label||`All`}),(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray transition-transform ${i?`rotate-180`:``}`})]}),i&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-10`,onClick:()=>a(!1)}),(0,G.jsx)(`div`,{className:`absolute top-full left-0 mt-1 min-w-[160px] bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl z-20 py-1 max-h-60 overflow-y-auto`,children:n.map(e=>(0,G.jsxs)(`button`,{onClick:()=>{r(e.value),a(!1)},className:`w-full px-3 py-2 text-left text-sm flex items-center justify-between hover:bg-bambu-dark-tertiary transition-colors ${t===e.value?`text-bambu-green`:`text-white`}`,children:[(0,G.jsx)(`span`,{children:e.label}),e.count!==void 0&&(0,G.jsx)(`span`,{className:`text-bambu-gray text-xs`,children:e.count})]},e.value))})]})]})}function pKe(){let[e,t]=(0,y.useState)(!1);return(0,y.useEffect)(()=>{let e=()=>{t(window.scrollY>300)};return window.addEventListener(`scroll`,e),()=>window.removeEventListener(`scroll`,e)},[]),e?(0,G.jsx)(`button`,{onClick:()=>{window.scrollTo({top:0,behavior:`smooth`})},className:`fixed bottom-24 right-6 p-3 bg-bambu-green hover:bg-bambu-green-light text-white rounded-full shadow-lg shadow-bambu-green/25 transition-all z-40`,"aria-label":`Scroll to top`,children:(0,G.jsx)(Ho,{className:`w-5 h-5`})}):null}function k5({setting:e,onClick:t,onDuplicate:n,compareMode:r,isCompareSelected:i,compareIndex:a,compareDisabled:o,t:s}){let c=E5(e.name),l=D5(e.setting_id);return(0,G.jsxs)(`div`,{className:`flex items-center gap-2 group`,children:[(0,G.jsx)(`button`,{onClick:t,disabled:o,className:`flex-1 text-left px-3 py-2 rounded transition-colors ${i?`bg-blue-500/20 border border-blue-500/50`:o?`bg-bambu-dark/50 opacity-40 cursor-not-allowed`:`bg-bambu-dark hover:bg-bambu-dark-tertiary`} ${r&&!o?`cursor-pointer`:``}`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[i&&a!==void 0&&(0,G.jsx)(`span`,{className:`flex-shrink-0 w-5 h-5 rounded-full bg-blue-500 text-white text-xs flex items-center justify-center font-medium`,children:a+1}),!i&&l&&(0,G.jsx)(`span`,{className:`flex-shrink-0 w-1.5 h-1.5 rounded-full bg-bambu-green`,title:s(`profiles.presets.myPreset`)}),(0,G.jsx)(`span`,{className:`text-white text-sm truncate flex-1`,title:e.name,children:e.name}),c.filamentType&&e.type===`filament`&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray whitespace-nowrap`,children:c.filamentType}),c.layerHeight&&e.type===`process`&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray whitespace-nowrap`,children:c.layerHeight}),c.printer&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray whitespace-nowrap`,children:c.printer})]})}),(0,G.jsx)(`button`,{onClick:e=>{e.stopPropagation(),n()},className:`can-hover:opacity-0 group-hover:opacity-100 focus-visible:opacity-100 text-bambu-gray hover:text-white transition-all p-1`,title:s(`profiles.presets.duplicate`),children:(0,G.jsx)(Vs,{className:`w-4 h-4`})})]})}function A5(e,t=0){let n=`  `.repeat(t);if(e===null)return`null`;if(e===void 0)return`undefined`;if(typeof e==`string`){if(e.includes(`\\n`)||e.includes(`
+}`,value:i.ldap_group_mapping,onChange:e=>a({...i,ldap_group_mapping:e.target.value})}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:[e(`settings.ldap.groupMappingHint`)||`Map LDAP group DNs to BamBuddy groups. Available groups: `,l.map(e=>e.name).join(`, `)]})]})]})}),(0,G.jsxs)(`div`,{className:`flex gap-3 pt-2`,children:[(0,G.jsxs)(Q,{onClick:p,disabled:u.isPending,children:[u.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(xs,{className:`w-4 h-4`}),e(`common.save`)||`Save`]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>f.mutate(),disabled:f.isPending,children:[f.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Ql,{className:`w-4 h-4`}),e(`settings.ldap.testConnection`)||`Test Connection`]})]})]})})]})]})}function o5({value:e,onChange:t,placeholder:n,maxLength:r=6}){return(0,G.jsx)(`input`,{type:`text`,value:e,onChange:e=>t(e.target.value.toUpperCase().replace(/\s/g,``)),maxLength:r,className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors font-mono tracking-widest text-center`,placeholder:n,autoComplete:`one-time-code`})}function bGe({codes:e,onDone:t}){let{t:n}=U(),[r,i]=(0,y.useState)(!1);return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`div`,{className:`bg-amber-50 dark:bg-amber-500/10 border border-amber-300 dark:border-amber-500/30 rounded-lg p-4`,children:(0,G.jsx)(`p`,{className:`text-amber-700 dark:text-amber-400 text-sm font-medium`,children:n(`settings.twoFa.backupCodesWarning`)})}),(0,G.jsx)(`div`,{className:`grid grid-cols-2 gap-2`,children:e.map((e,t)=>(0,G.jsx)(`code`,{className:`bg-bambu-dark-secondary rounded px-3 py-2 text-center font-mono text-sm text-white tracking-widest`,children:e},t))}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>{navigator.clipboard.writeText(e.join(`
+`)),i(!0),setTimeout(()=>i(!1),2e3)},className:`flex items-center gap-2`,children:[(0,G.jsx)(Vs,{className:`w-4 h-4`}),n(r?`common.copied`:`common.copy`)]}),(0,G.jsx)(Q,{variant:`primary`,size:`sm`,onClick:t,className:`flex-1`,children:n(`settings.twoFa.savedCodes`)})]})]})}function xGe({onDone:e}){let{t}=U(),n=co(),{showToast:r}=Gd(),[i,a]=(0,y.useState)(`qr`),[o,s]=(0,y.useState)(``),[c,l]=(0,y.useState)([]),[u,d]=(0,y.useState)(!1),{data:f,isLoading:p}=K({queryKey:[`totp-setup`],queryFn:()=>Z.setupTOTP(),staleTime:1/0}),m=q({mutationFn:e=>Z.enableTOTP(e),onSuccess:e=>{l(e.backup_codes),a(`backup`),n.invalidateQueries({queryKey:[`2fa-status`]})},onError:()=>r(t(`settings.twoFa.invalidCode`),`error`)});return p||!f?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-8`,children:(0,G.jsx)(Vl,{className:`w-6 h-6 animate-spin text-bambu-green`})}):i===`qr`?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray-light text-sm`,children:t(`settings.twoFa.setupInstructions`)}),(0,G.jsx)(`div`,{className:`flex justify-center`,children:(0,G.jsx)(`img`,{src:`data:image/png;base64,${f.qr_code_b64}`,alt:`TOTP QR Code`,className:`w-48 h-48 rounded-lg`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-1`,children:t(`settings.twoFa.manualEntry`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 bg-bambu-dark-secondary rounded-lg px-3 py-2`,children:[(0,G.jsx)(`code`,{className:`text-white text-xs font-mono flex-1 break-all`,children:u?f.secret:`••••••••••••••••`}),(0,G.jsx)(`button`,{onClick:()=>d(!u),className:`text-bambu-gray hover:text-white`,children:u?(0,G.jsx)(rc,{className:`w-4 h-4`}):(0,G.jsx)(ic,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>{navigator.clipboard.writeText(f.secret)},className:`text-bambu-gray hover:text-white`,children:(0,G.jsx)(Vs,{className:`w-4 h-4`})})]})]}),(0,G.jsx)(Q,{variant:`primary`,className:`w-full`,onClick:()=>a(`confirm`),children:t(`settings.twoFa.scannedContinue`)})]}):i===`confirm`?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray-light text-sm`,children:t(`settings.twoFa.enterCodeToConfirm`)}),(0,G.jsx)(o5,{value:o,onChange:s,placeholder:`000000`}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>a(`qr`),className:`flex-1`,children:t(`common.back`)}),(0,G.jsx)(Q,{variant:`primary`,className:`flex-1`,disabled:o.length!==6||m.isPending,onClick:()=>m.mutate(o),children:m.isPending?t(`common.saving`):t(`settings.twoFa.activate`)})]})]}):(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`h3`,{className:`text-white font-medium`,children:t(`settings.twoFa.backupCodesTitle`)}),(0,G.jsx)(bGe,{codes:c,onDone:e})]})}function SGe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),{user:r}=jd(),[i,a]=(0,y.useState)(!1),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(``),[f,p]=(0,y.useState)(``),[m,h]=(0,y.useState)(null),[g,_]=(0,y.useState)(null),[v,b]=(0,y.useState)(``),[x,S]=(0,y.useState)(!1),[C,w]=(0,y.useState)(``),[T,E]=(0,y.useState)(!1),{data:D,isLoading:O}=K({queryKey:[`2fa-status`],queryFn:()=>Z.get2FAStatus()}),{data:k}=K({queryKey:[`oidc-links`],queryFn:()=>Z.getOIDCLinks()}),A=q({mutationFn:()=>Z.enableEmailOTP(),onSuccess:e=>{_(e.setup_token),n(e.message,`success`)},onError:t=>{let r=t.message??``;r.toLowerCase().includes(`smtp`)?n(e(`settings.twoFa.smtpRequired`),`error`):n(r,`error`)}}),j=q({mutationFn:()=>Z.confirmEnableEmailOTP(g,v),onSuccess:()=>{t.invalidateQueries({queryKey:[`2fa-status`]}),_(null),b(``),n(e(`settings.twoFa.emailOtpEnabled`),`success`)},onError:e=>n(e.message,`error`)}),M=q({mutationFn:e=>Z.disableEmailOTP(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`2fa-status`]}),S(!1),w(``),n(e(`settings.twoFa.emailOtpDisabled`),`success`)},onError:e=>n(e.message,`error`)}),N=q({mutationFn:e=>Z.disableTOTP(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`2fa-status`]}),s(!1),d(``),n(e(`settings.twoFa.totpDisabled`),`success`)},onError:()=>n(e(`settings.twoFa.invalidCode`),`error`)}),P=q({mutationFn:e=>Z.regenerateBackupCodes(e),onSuccess:e=>{t.invalidateQueries({queryKey:[`2fa-status`]}),l(!1),p(``),h(e.backup_codes)},onError:()=>n(e(`settings.twoFa.invalidCode`),`error`)}),F=q({mutationFn:e=>Z.deleteOIDCLink(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`oidc-links`]}),n(e(`settings.twoFa.oidcUnlinked`),`success`)},onError:e=>n(e.message,`error`)});if(O)return(0,G.jsx)(`div`,{className:`flex items-center justify-center py-12`,children:(0,G.jsx)(Vl,{className:`w-6 h-6 animate-spin text-bambu-green`})});let I=!!r?.email;return(0,G.jsxs)(`div`,{className:`space-y-6`,children:[(0,G.jsxs)(Ld,{id:`card-2fa-totp`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full flex items-center justify-center ${D?.totp_enabled?`bg-green-100 dark:bg-green-500/20`:`bg-gray-500/20`}`,children:(0,G.jsx)(pu,{className:`w-5 h-5 ${D?.totp_enabled?`text-green-600 dark:text-green-400`:`text-gray-400`}`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-white font-semibold`,children:e(`settings.twoFa.totpTitle`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm`,children:e(`settings.twoFa.totpDesc`)})]}),(0,G.jsx)(`div`,{className:`ml-auto`,children:D?.totp_enabled?(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-green-700 dark:text-green-400 text-sm font-medium`,children:[(0,G.jsx)(iu,{className:`w-4 h-4`}),` `,e(`common.enabled`)]}):(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-bambu-gray text-sm`,children:[(0,G.jsx)(au,{className:`w-4 h-4`}),` `,e(`common.disabled`)]})})]})}),(0,G.jsx)(zd,{children:i?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`h4`,{className:`text-white font-medium`,children:e(`settings.twoFa.setupAuthApp`)}),(0,G.jsx)(`button`,{onClick:()=>{a(!1),t.removeQueries({queryKey:[`totp-setup`]})},className:`text-bambu-gray hover:text-white`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(xGe,{onDone:()=>{a(!1),t.removeQueries({queryKey:[`totp-setup`]})}})]}):o?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray-light text-sm`,children:e(`settings.twoFa.disableConfirmHint`)}),(0,G.jsx)(o5,{value:u,onChange:d,placeholder:`000000 or XXXXXXXX`,maxLength:8}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{s(!1),d(``)},className:`flex-1`,children:e(`common.cancel`)}),(0,G.jsx)(Q,{variant:`danger`,className:`flex-1`,disabled:u.length<6||N.isPending,onClick:()=>N.mutate(u),children:N.isPending?e(`common.saving`):e(`settings.twoFa.disableTotp`)})]})]}):c?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray-light text-sm`,children:e(`settings.twoFa.regenBackupHint`)}),(0,G.jsx)(o5,{value:f,onChange:p,placeholder:`000000 or XXXXXXXX`,maxLength:8}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{l(!1),p(``)},className:`flex-1`,children:e(`common.cancel`)}),(0,G.jsx)(Q,{variant:`primary`,className:`flex-1`,disabled:f.length<6||P.isPending,onClick:()=>P.mutate(f),children:P.isPending?e(`common.saving`):e(`settings.twoFa.regenBackup`)})]})]}):m?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`h4`,{className:`text-white font-medium`,children:e(`settings.twoFa.newBackupCodes`)}),(0,G.jsx)(bGe,{codes:m,onDone:()=>h(null)})]}):(0,G.jsx)(`div`,{className:`space-y-3`,children:D?.totp_enabled?(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray-light`,children:[(0,G.jsx)(Gc,{className:`w-4 h-4`}),e(`settings.twoFa.backupCodesRemaining`,{count:D.backup_codes_remaining})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>l(!0),className:`flex items-center gap-2`,children:[(0,G.jsx)(Vl,{className:`w-4 h-4`}),e(`settings.twoFa.regenBackup`)]}),(0,G.jsxs)(Q,{variant:`danger`,size:`sm`,onClick:()=>s(!0),className:`flex items-center gap-2`,children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),e(`settings.twoFa.disableTotp`)]})]}):(0,G.jsxs)(Q,{variant:`primary`,onClick:()=>a(!0),className:`flex items-center gap-2`,children:[(0,G.jsx)(pu,{className:`w-4 h-4`}),e(`settings.twoFa.setupTotp`)]})})})]}),(0,G.jsxs)(Ld,{id:`card-2fa-emailotp`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full flex items-center justify-center ${D?.email_otp_enabled?`bg-green-100 dark:bg-green-500/20`:`bg-gray-500/20`}`,children:(0,G.jsx)(il,{className:`w-5 h-5 ${D?.email_otp_enabled?`text-green-600 dark:text-green-400`:`text-gray-400`}`})}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`h3`,{className:`text-white font-semibold`,children:e(`settings.twoFa.emailOtpTitle`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm`,children:I?e(`settings.twoFa.emailOtpDesc`,{email:r?.email}):e(`settings.twoFa.emailOtpNoEmail`)})]}),(0,G.jsx)(`div`,{className:`ml-auto`,children:D?.email_otp_enabled?(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-green-700 dark:text-green-400 text-sm font-medium`,children:[(0,G.jsx)(iu,{className:`w-4 h-4`}),` `,e(`common.enabled`)]}):(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-bambu-gray text-sm`,children:[(0,G.jsx)(au,{className:`w-4 h-4`}),` `,e(`common.disabled`)]})})]})}),(0,G.jsx)(zd,{children:I?g?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray-light text-sm`,children:e(`settings.twoFa.emailSetupEnterCode`)}),(0,G.jsx)(o5,{value:v,onChange:b,placeholder:`000000`}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{_(null),b(``)},className:`flex-1`,children:e(`common.cancel`)}),(0,G.jsx)(Q,{variant:`primary`,className:`flex-1`,disabled:v.length!==6||j.isPending,onClick:()=>j.mutate(),children:j.isPending?e(`common.saving`):e(`settings.twoFa.verifyAndEnable`)})]})]}):x?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray-light text-sm`,children:e(`settings.twoFa.emailDisablePasswordHint`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`input`,{type:T?`text`:`password`,value:C,onChange:e=>w(e.target.value),placeholder:e(`settings.twoFa.passwordPlaceholder`),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>E(!T),className:`absolute right-3 top-1/2 -translate-y-1/2 text-bambu-gray hover:text-white`,children:T?(0,G.jsx)(rc,{className:`w-5 h-5`}):(0,G.jsx)(ic,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{S(!1),w(``)},className:`flex-1`,children:e(`common.cancel`)}),(0,G.jsx)(Q,{variant:`danger`,className:`flex-1`,disabled:!C||M.isPending,onClick:()=>M.mutate(C),children:M.isPending?e(`common.saving`):e(`settings.twoFa.disableEmailOtp`)})]})]}):(0,G.jsx)(`div`,{className:`flex gap-3`,children:D?.email_otp_enabled?(0,G.jsxs)(Q,{variant:`danger`,size:`sm`,onClick:()=>S(!0),className:`flex items-center gap-2`,children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),e(`settings.twoFa.disableEmailOtp`)]}):(0,G.jsxs)(Q,{variant:`primary`,disabled:!I||A.isPending,onClick:()=>A.mutate(),className:`flex items-center gap-2`,children:[(0,G.jsx)(il,{className:`w-4 h-4`}),A.isPending?e(`common.saving`):e(`settings.twoFa.enableEmailOtp`)]})}):(0,G.jsx)(`p`,{className:`text-amber-700 dark:text-amber-400 text-sm`,children:e(`settings.twoFa.addEmailFirst`)})})]}),k&&k.length>0&&(0,G.jsxs)(Ld,{id:`card-2fa-linked`,children:[(0,G.jsxs)(Rd,{children:[(0,G.jsx)(`h3`,{className:`text-white font-semibold`,children:e(`settings.twoFa.linkedAccounts`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm`,children:e(`settings.twoFa.linkedAccountsDesc`)})]}),(0,G.jsx)(zd,{children:(0,G.jsx)(`div`,{className:`space-y-3`,children:k.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between py-2 border-b border-bambu-dark-tertiary last:border-0`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white text-sm font-medium`,children:e.provider_name}),e.provider_email&&(0,G.jsx)(`p`,{className:`text-bambu-gray text-xs`,children:e.provider_email})]}),(0,G.jsx)(Q,{variant:`danger`,size:`sm`,onClick:()=>F.mutate(e.provider_id),disabled:F.isPending,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]},e.id))})})]})]})}var CGe={name:``,issuer_url:``,client_id:``,client_secret:``,scopes:`openid email profile`,is_enabled:!0,auto_create_users:!1,auto_link_existing_accounts:!1,email_claim:`email`,require_email_verified:!0,icon_url:void 0,default_group_id:null,is_autologin:!1};function wGe({initial:e,isEdit:t=!1,groups:n=[],onSave:r,onCancel:i,isPending:a}){let{t:o}=U(),[s,c]=(0,y.useState)(e),[l,u]=(0,y.useState)(!1),d=(e,t)=>c(n=>({...n,[e]:t})),f=`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors text-sm`,p=`block text-sm font-medium text-white mb-1`,m=()=>{let e={...s};t&&!l&&delete e.client_secret,r(e)},h=s.auto_link_existing_accounts===!0,g=s.require_email_verified??!0,_;return _=h?o(`settings.oidc.form.requireEmailVerifiedAutoLink`):g?o(`settings.oidc.form.requireEmailVerifiedDesc`):(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:o(`settings.oidc.form.requireEmailVerifiedWarning`)}),(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:p,children:[o(`settings.oidc.form.name`),` `,(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:`*`})]}),(0,G.jsx)(`input`,{className:f,value:s.name,onChange:e=>d(`name`,e.target.value),placeholder:`Google`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:p,children:[o(`settings.oidc.form.issuerUrl`),` `,(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:`*`})]}),(0,G.jsx)(`input`,{className:f,value:s.issuer_url,onChange:e=>d(`issuer_url`,e.target.value),placeholder:`https://accounts.google.com`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:p,children:[o(`settings.oidc.form.clientId`),` `,(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:`*`})]}),(0,G.jsx)(`input`,{className:f,value:s.client_id,onChange:e=>d(`client_id`,e.target.value),placeholder:`your-client-id`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:p,children:[o(`settings.oidc.form.clientSecret`),!t&&(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:` *`}),t&&(0,G.jsxs)(`span`,{className:`text-bambu-gray text-xs ml-1`,children:[`(`,o(`settings.oidc.form.secretHint`),`)`]})]}),(0,G.jsx)(`input`,{className:f,type:`password`,value:l?s.client_secret:``,placeholder:t&&!l?`••••••••`:o(`settings.oidc.form.secretPlaceholder`),onChange:e=>{u(!0),d(`client_secret`,e.target.value)}})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p,children:o(`settings.oidc.form.scopes`)}),(0,G.jsx)(`input`,{className:f,value:s.scopes,onChange:e=>d(`scopes`,e.target.value),placeholder:`openid email profile`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p,children:o(`settings.oidc.form.iconUrl`)}),(0,G.jsx)(`input`,{className:f,value:s.icon_url??``,onChange:e=>d(`icon_url`,e.target.value===``?null:e.target.value),placeholder:`https://...`})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-6 pt-2`,children:[(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(hU,{checked:s.is_enabled??!0,onChange:e=>d(`is_enabled`,e)}),(0,G.jsx)(`span`,{className:`text-white text-sm`,children:o(`settings.oidc.form.enabled`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(hU,{checked:s.auto_create_users??!1,onChange:e=>d(`auto_create_users`,e)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white text-sm`,children:o(`settings.oidc.form.autoCreate`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-xs`,children:o(`settings.oidc.form.autoCreateDesc`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer w-full`,children:[(0,G.jsx)(hU,{checked:s.auto_link_existing_accounts??!1,onChange:e=>d(`auto_link_existing_accounts`,e)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white text-sm`,children:o(`settings.oidc.form.autoLink`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-xs`,children:o(`settings.oidc.form.autoLinkDesc`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer w-full`,children:[(0,G.jsx)(hU,{checked:g,onChange:e=>d(`require_email_verified`,e),disabled:h}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white text-sm`,children:o(`settings.oidc.form.requireEmailVerified`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-xs`,children:_})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer w-full`,children:[(0,G.jsx)(hU,{checked:s.is_autologin??!1,onChange:e=>d(`is_autologin`,e)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white text-sm`,children:o(`settings.oidc.form.autologin`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-xs`,children:o(`settings.oidc.form.autologinDesc`)})]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p,children:o(`settings.oidc.form.emailClaim`)}),(0,G.jsx)(`input`,{className:f,value:s.email_claim,onChange:e=>d(`email_claim`,e.target.value||`email`),placeholder:o(`settings.oidc.form.emailClaimPlaceholder`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-xs mt-1`,children:o(`settings.oidc.form.emailClaimDesc`)}),h&&s.email_claim!==`email`&&(0,G.jsx)(`p`,{className:`text-yellow-700 dark:text-yellow-400 text-xs mt-1`,children:o(`settings.oidc.form.emailClaimCustomClaimAutoLinkWarning`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p,children:o(`settings.oidc.form.defaultGroup`)}),(0,G.jsxs)(`select`,{className:f,value:s.default_group_id??``,onChange:e=>d(`default_group_id`,e.target.value?Number(e.target.value):null),children:[(0,G.jsx)(`option`,{value:``,children:o(`settings.oidc.form.defaultGroupViewersFallback`)}),n.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-xs mt-1`,children:o(`settings.oidc.form.defaultGroupDesc`)})]}),(0,G.jsxs)(`div`,{className:`flex gap-3 pt-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:i,className:`flex-1`,children:o(`common.cancel`)}),(0,G.jsx)(Q,{variant:`primary`,className:`flex-1`,disabled:!s.name||!s.issuer_url||!s.client_id||!t&&!s.client_secret||t&&l&&!s.client_secret||a,onClick:m,children:o(a?`common.saving`:`common.save`)})]})]})}function TGe({provider:e}){let[t,n]=(0,y.useState)(!1);return e.has_icon&&!t?(0,G.jsx)(`img`,{src:Z.oidcProviderIconUrl(e.id),alt:e.name,className:`w-8 h-8 rounded object-contain`,onError:()=>n(!0)}):(0,G.jsx)(`div`,{className:`w-8 h-8 rounded-full bg-bambu-dark-tertiary flex items-center justify-center`,children:(0,G.jsx)(kc,{className:`w-4 h-4 text-bambu-gray`})})}function EGe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),[r,i]=(0,y.useState)(!1),[a,o]=(0,y.useState)(null),[s,c]=(0,y.useState)(null),{data:l,isLoading:u}=K({queryKey:[`oidc-providers-all`],queryFn:()=>Z.getOIDCProvidersAll()}),{data:d=[]}=K({queryKey:[`groups`],queryFn:()=>Z.getGroups()}),f=q({mutationFn:e=>Z.createOIDCProvider(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`oidc-providers-all`]}),i(!1),n(e(`settings.oidc.created`),`success`)},onError:e=>n(e.message,`error`)}),p=q({mutationFn:({id:e,data:t})=>Z.updateOIDCProvider(e,t),onSuccess:()=>{t.invalidateQueries({queryKey:[`oidc-providers-all`]}),o(null),n(e(`settings.oidc.updated`),`success`)},onError:e=>n(e.message,`error`)}),m=q({mutationFn:e=>Z.deleteOIDCProvider(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`oidc-providers-all`]}),c(null),n(e(`settings.oidc.deleted`),`success`)},onError:e=>n(e.message,`error`)}),h=q({mutationFn:e=>Z.refreshOIDCProviderIcon(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`oidc-providers-all`]}),t.invalidateQueries({queryKey:[`oidc-providers`]}),n(e(`settings.oidc.iconRefreshed`),`success`)},onError:t=>n(t.message||e(`settings.oidc.iconFetchFailed`),`error`)}),g=q({mutationFn:e=>Z.deleteOIDCProviderIcon(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`oidc-providers-all`]}),t.invalidateQueries({queryKey:[`oidc-providers`]}),n(e(`settings.oidc.iconRemoved`),`success`)},onError:e=>n(e.message,`error`)}),_=e=>p.mutate({id:e.id,data:{is_enabled:!e.is_enabled}});return u?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-12`,children:(0,G.jsx)(Vl,{className:`w-6 h-6 animate-spin text-bambu-green`})}):(0,G.jsxs)(`div`,{className:`space-y-6`,children:[(0,G.jsxs)(Ld,{id:`card-oidc`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-white font-semibold`,children:e(`settings.oidc.title`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm`,children:e(`settings.oidc.desc`)})]}),!r&&(0,G.jsxs)(Q,{variant:`primary`,size:`sm`,onClick:()=>i(!0),className:`flex items-center gap-2`,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),e(`settings.oidc.addProvider`)]})]})}),r&&(0,G.jsx)(zd,{children:(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary pt-4`,children:[(0,G.jsx)(`h4`,{className:`text-white font-medium mb-4`,children:e(`settings.oidc.newProvider`)}),(0,G.jsx)(wGe,{initial:CGe,groups:d,onSave:e=>f.mutate(e),onCancel:()=>i(!1),isPending:f.isPending})]})})]}),l&&l.length===0&&!r&&(0,G.jsx)(Ld,{id:`card-oidc-empty`,children:(0,G.jsx)(zd,{children:(0,G.jsxs)(`div`,{className:`text-center py-8 space-y-3`,children:[(0,G.jsx)(kc,{className:`w-12 h-12 text-bambu-gray mx-auto`}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`settings.oidc.empty`)}),(0,G.jsxs)(Q,{variant:`primary`,size:`sm`,onClick:()=>i(!0),className:`inline-flex items-center gap-2`,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),e(`settings.oidc.addProvider`)]})]})})}),l?.map(t=>(0,G.jsxs)(Ld,{children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(TGe,{provider:t}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`h4`,{className:`text-white font-medium`,children:t.name}),t.is_enabled?(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-xs text-green-700 dark:text-green-400 bg-green-50 dark:bg-green-400/10 px-2 py-0.5 rounded-full`,children:[(0,G.jsx)(fs,{className:`w-3 h-3`}),` `,e(`common.enabled`)]}):(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-xs text-bambu-gray bg-bambu-dark-tertiary px-2 py-0.5 rounded-full`,children:[(0,G.jsx)(td,{className:`w-3 h-3`}),` `,e(`common.disabled`)]}),t.is_env_managed&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-xs text-bambu-green`,children:[(0,G.jsx)(tl,{className:`w-3 h-3`}),` `,e(`settings.environmentManagedLabel`)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 text-bambu-gray text-xs mt-0.5`,children:[(0,G.jsx)(nc,{className:`w-3 h-3`}),(0,G.jsx)(`span`,{children:t.issuer_url})]})]}),(0,G.jsx)(`div`,{className:`flex items-center gap-2`,children:!t.is_env_managed&&(0,G.jsxs)(G.Fragment,{children:[t.icon_url&&(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>h.mutate(t.id),disabled:h.isPending,title:e(`settings.oidc.refreshIcon`),"data-testid":`refresh-icon-${t.id}`,children:(0,G.jsx)(Vl,{className:`w-4 h-4 ${h.isPending?`animate-spin`:``}`})}),t.has_icon&&(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>g.mutate(t.id),disabled:g.isPending,title:e(`settings.oidc.removeIcon`),"data-testid":`remove-icon-${t.id}`,children:(0,G.jsx)(Bc,{className:`w-4 h-4`})}),(0,G.jsx)(hU,{checked:t.is_enabled,onChange:()=>_(t),disabled:p.isPending}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>o(a===t.id?null:t.id),"data-testid":`edit-provider-${t.id}`,children:(0,G.jsx)(Ol,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`danger`,size:`sm`,onClick:()=>c(t),"data-testid":`delete-provider-${t.id}`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})})]})}),a===t.id&&(0,G.jsx)(zd,{children:(0,G.jsx)(`div`,{className:`border-t border-bambu-dark-tertiary pt-4`,children:(0,G.jsx)(wGe,{isEdit:!0,groups:d,initial:{name:t.name,issuer_url:t.issuer_url,client_id:t.client_id,client_secret:``,scopes:t.scopes,is_enabled:t.is_enabled,auto_create_users:t.auto_create_users,auto_link_existing_accounts:t.auto_link_existing_accounts,email_claim:t.email_claim,require_email_verified:t.require_email_verified,icon_url:t.icon_url??void 0,default_group_id:t.default_group_id??null,is_autologin:t.is_autologin},onSave:e=>p.mutate({id:t.id,data:e}),onCancel:()=>o(null),isPending:p.isPending})})}),a!==t.id&&(0,G.jsx)(zd,{children:(0,G.jsxs)(`dl`,{className:`grid grid-cols-2 sm:grid-cols-3 gap-x-6 gap-y-2 text-sm`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`dt`,{className:`text-bambu-gray`,children:e(`settings.oidc.form.clientId`)}),(0,G.jsx)(`dd`,{className:`text-white font-mono truncate`,children:t.client_id})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`dt`,{className:`text-bambu-gray`,children:e(`settings.oidc.form.scopes`)}),(0,G.jsx)(`dd`,{className:`text-white`,children:t.scopes})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`dt`,{className:`text-bambu-gray`,children:e(`settings.oidc.form.autoCreate`)}),(0,G.jsx)(`dd`,{className:t.auto_create_users?`text-green-700 dark:text-green-400`:`text-bambu-gray`,children:t.auto_create_users?e(`common.yes`):e(`common.no`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`dt`,{className:`text-bambu-gray`,children:e(`settings.oidc.form.autoLink`)}),(0,G.jsx)(`dd`,{className:t.auto_link_existing_accounts?`text-green-700 dark:text-green-400`:`text-bambu-gray`,children:t.auto_link_existing_accounts?e(`common.yes`):e(`common.no`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`dt`,{className:`text-bambu-gray`,children:e(`settings.oidc.form.emailClaim`)}),(0,G.jsx)(`dd`,{className:`text-white font-mono`,children:t.email_claim})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`dt`,{className:`text-bambu-gray`,children:e(`settings.oidc.form.requireEmailVerified`)}),(0,G.jsx)(`dd`,{className:t.require_email_verified?`text-green-700 dark:text-green-400`:`text-red-700 dark:text-red-400`,children:t.require_email_verified?e(`common.yes`):e(`common.no`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`dt`,{className:`text-bambu-gray`,children:e(`settings.oidc.form.defaultGroup`)}),(0,G.jsx)(`dd`,{className:`text-white`,children:t.default_group_id?d.find(e=>e.id===t.default_group_id)?.name??e(`settings.oidc.form.defaultGroupViewersFallback`):e(`settings.oidc.form.defaultGroupViewersFallback`)})]})]})})]},t.id)),s&&(0,G.jsx)(rf,{title:e(`settings.oidc.deleteTitle`),message:e(`settings.oidc.deleteMessage`,{name:s.name}),confirmText:e(`common.delete`),variant:`danger`,onConfirm:()=>m.mutate(s.id),onCancel:()=>c(null)})]})}var DGe=new Map;function s5(e){DGe.set(e.anchor,e)}function OGe(){return Array.from(DGe.values())}s5({labelKey:`settings.encryption.title`,labelFallback:`MFA Encryption Status`,tab:`users`,subTab:`security`,keywords:`mfa encryption status security backup totp oidc fernet`,anchor:`card-mfa-encryption`});function kGe(){let{t:e}=U(),{data:t,isLoading:n,isError:r,refetch:i}=K({queryKey:[`encryptionStatus`],queryFn:()=>Z.getEncryptionStatus(),refetchInterval:e=>{if(!e.state.error)return 3e4;let t=e.state.fetchFailureCount??0;return t<=3?Math.min(5e3*Math.max(1,t),3e4):!1}});if(n)return(0,G.jsxs)(Ld,{id:`card-mfa-encryption`,"data-testid":`encryption-status-card`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(ou,{className:`text-bambu-gray`,size:20}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold`,children:e(`settings.encryption.title`)})]})}),(0,G.jsx)(zd,{children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray`,"data-testid":`encryption-loading`,children:[(0,G.jsx)(Y,{className:`animate-spin`,size:16}),(0,G.jsx)(`span`,{children:e(`common.loading`)})]})})]});if(r||!t)return(0,G.jsxs)(Ld,{id:`card-mfa-encryption`,"data-testid":`encryption-status-card`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(ou,{className:`text-bambu-gray`,size:20}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold`,children:e(`settings.encryption.title`)})]})}),(0,G.jsxs)(zd,{children:[(0,G.jsx)(`div`,{className:`text-red-700 dark:text-red-400`,"data-testid":`encryption-error`,children:e(`common.errorLoading`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>i(),className:`mt-2 text-sm text-blue-700 dark:text-blue-400 underline hover:text-blue-800 dark:hover:text-blue-300`,"data-testid":`encryption-retry-button`,children:e(`common.retry`)})]})]});let a=t.legacy_plaintext_rows.oidc_providers+t.legacy_plaintext_rows.user_totp,o=t.encrypted_rows.oidc_providers+t.encrypted_rows.user_totp,s,c,l,u;t.decryption_broken?(s=`bg-red-100 dark:bg-red-500/20 border-red-400 dark:border-red-500/50 text-red-700 dark:text-red-400`,c=(0,G.jsx)(Ds,{className:`text-red-600 dark:text-red-400`,size:20}),l=e(`settings.encryption.decryptionBrokenTitle`),u=e(`settings.encryption.decryptionBrokenError`,{count:o})):t.key_source===`generated`?(s=`bg-amber-50 dark:bg-amber-500/10 border-amber-300 dark:border-amber-500/30 text-amber-700 dark:text-amber-400`,c=(0,G.jsx)(iu,{className:`text-amber-600 dark:text-amber-400`,size:20}),l=e(`settings.encryption.enabledGenerated`),u=e(`settings.encryption.backupHint`)):a>0?(s=`bg-amber-50 dark:bg-amber-500/10 border-amber-300 dark:border-amber-500/30 text-amber-700 dark:text-amber-400`,c=(0,G.jsx)(Iu,{className:`text-amber-600 dark:text-amber-400`,size:20}),l=t.key_source===`env`?e(`settings.encryption.enabledFromEnv`):e(`settings.encryption.enabledFromFile`),u=e(`settings.encryption.legacyRowsWarning`,{count:a})):t.key_configured?(s=`bg-green-100 dark:bg-green-500/20 border-green-300 dark:border-green-500/30 text-green-700 dark:text-green-400`,c=(0,G.jsx)(iu,{className:`text-green-600 dark:text-green-400`,size:20}),l=t.key_source===`env`?e(`settings.encryption.enabledFromEnv`):e(`settings.encryption.enabledFromFile`),u=e(`settings.encryption.allEncrypted`)):(s=`bg-gray-500/20 border-gray-500/30 text-gray-400`,c=(0,G.jsx)(au,{className:`text-gray-400`,size:20}),l=e(`settings.encryption.notConfigured`),u=e(`settings.encryption.notConfiguredDesc`));let d=t.key_source===`generated`&&a>0;return(0,G.jsxs)(Ld,{id:`card-mfa-encryption`,"data-testid":`encryption-status-card`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[c,(0,G.jsx)(`h2`,{className:`text-lg font-semibold`,children:e(`settings.encryption.title`)})]})}),(0,G.jsxs)(zd,{children:[(0,G.jsxs)(`div`,{className:`p-3 border rounded-lg ${s}`,"data-testid":`encryption-status`,children:[(0,G.jsx)(`p`,{className:`font-medium mb-1`,children:l}),(0,G.jsx)(`p`,{className:`text-sm`,children:u})]}),d&&(0,G.jsx)(`div`,{className:`mt-2 p-3 border rounded-lg bg-amber-50 dark:bg-amber-500/10 border-amber-300 dark:border-amber-500/30 text-amber-700 dark:text-amber-400`,"data-testid":`encryption-legacy-warning`,children:(0,G.jsx)(`p`,{className:`text-sm`,children:e(`settings.encryption.legacyRowsWarning`,{count:a})})}),t.migration_error_count>0&&(0,G.jsx)(`div`,{className:`mt-2 p-3 border rounded-lg bg-amber-50 dark:bg-amber-500/10 border-amber-300 dark:border-amber-500/30 text-amber-700 dark:text-amber-400`,"data-testid":`encryption-migration-warning`,children:(0,G.jsx)(`p`,{className:`text-sm`,children:e(`settings.encryption.migrationErrorWarning`,{count:t.migration_error_count})})}),(0,G.jsxs)(`div`,{className:`mt-4 grid grid-cols-2 gap-4 text-sm`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`settings.encryption.encryptedRowsLabel`)}),(0,G.jsxs)(`p`,{className:`font-medium`,children:[`OIDC: `,t.encrypted_rows.oidc_providers,` · TOTP: `,t.encrypted_rows.user_totp]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`settings.encryption.legacyRowsLabel`)}),(0,G.jsxs)(`p`,{className:`font-medium`,children:[`OIDC: `,t.legacy_plaintext_rows.oidc_providers,` · TOTP: `,t.legacy_plaintext_rows.user_totp]})]})]})]})]})}var AGe={get:`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400 border-blue-300 dark:border-blue-500/30`,post:`bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-400 border-green-300 dark:border-green-500/30`,put:`bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400 border-yellow-300 dark:border-yellow-500/30`,patch:`bg-orange-100 dark:bg-orange-500/20 text-orange-700 dark:text-orange-400 border-orange-300 dark:border-orange-500/30`,delete:`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400 border-red-300 dark:border-red-500/30`};function jGe(e,t){let n=t.replace(`#/`,``).split(`/`),r=e;for(let e of n)r=r[e];return r}function c5(e,t,n=0){if(n>5)return`...`;if(t.$ref)return c5(e,jGe(e,t.$ref),n+1);if(t.allOf){let r={};for(let i of t.allOf){let t=c5(e,i,n+1);typeof t==`object`&&t&&Object.assign(r,t)}return r}if(t.example!==void 0)return t.example;if(t.default!==void 0)return t.default;switch(t.type){case`string`:return t.enum?t.enum[0]:`string`;case`integer`:case`number`:return 0;case`boolean`:return!1;case`array`:return t.items?[c5(e,t.items,n+1)]:[];case`object`:if(t.properties){let r={};for(let[i,a]of Object.entries(t.properties))r[i]=c5(e,a,n+1);return r}return{};default:return null}}function MGe({path:e,method:t,spec:n,schema:r,apiKey:i}){let[a,o]=(0,y.useState)(!1),[s,c]=(0,y.useState)({}),[l,u]=(0,y.useState)(``),[d,f]=(0,y.useState)(null),[p,m]=(0,y.useState)(!1),[h,g]=(0,y.useState)(!1);(0,y.useEffect)(()=>{if(a&&n.parameters){let e={};for(let t of n.parameters)t.schema?.default!==void 0&&(e[t.name]=String(t.schema.default));c(t=>({...e,...t}))}},[a,n.parameters]),(0,y.useEffect)(()=>{if(a&&n.requestBody?.content?.[`application/json`]?.schema&&!l){let e=n.requestBody.content[`application/json`].schema,t=c5(r,e);u(JSON.stringify(t,null,2))}},[a,n.requestBody,r,l]);let _=(()=>{let e=[];for(let t of n.parameters||[])if(t.in===`path`||t.required){let n=s[t.name];(n===void 0||n===``)&&e.push(t.name)}return e})(),v=async()=>{if(_.length>0){f({status:0,statusText:`Validation Error`,headers:{},body:`Missing required parameters: ${_.join(`, `)}`,duration:0});return}m(!0),f(null);try{let r=e,a=new URLSearchParams;for(let e of n.parameters||[]){let t=s[e.name];t!==void 0&&t!==``&&(e.in===`path`?r=r.replace(`{${e.name}}`,encodeURIComponent(t)):e.in===`query`&&a.append(e.name,t))}let o=a.toString(),c=`${r}${o?`?${o}`:``}`,u={"Content-Type":`application/json`};i&&(u[`X-API-Key`]=i);let d={method:t.toUpperCase(),headers:u};[`post`,`put`,`patch`].includes(t)&&l&&(d.body=l);let p=performance.now(),m=await fetch(c,d),h=Math.round(performance.now()-p),g={};m.headers.forEach((e,t)=>{g[t]=e});let _;_=m.headers.get(`content-type`)?.includes(`application/json`)?await m.json():await m.text(),f({status:m.status,statusText:m.statusText,headers:g,body:_,duration:h})}catch(e){f({status:0,statusText:`Network Error`,headers:{},body:e instanceof Error?e.message:`Unknown error`,duration:0})}finally{m(!1)}},b=async()=>{if(d){let e=typeof d.body==`string`?d.body:JSON.stringify(d.body,null,2);try{await navigator.clipboard.writeText(e),g(!0),setTimeout(()=>g(!1),2e3)}catch{let t=document.createElement(`textarea`);t.value=e,t.style.position=`fixed`,t.style.left=`-999999px`,document.body.appendChild(t),t.select(),document.execCommand(`copy`),document.body.removeChild(t),g(!0),setTimeout(()=>g(!1),2e3)}}},x=(n.parameters||[]).filter(e=>e.in===`path`),S=(n.parameters||[]).filter(e=>e.in===`query`),C=[`post`,`put`,`patch`].includes(t)&&n.requestBody;return(0,G.jsxs)(`div`,{className:`border border-bambu-dark-tertiary rounded-lg overflow-hidden`,children:[(0,G.jsxs)(`button`,{onClick:()=>o(!a),className:`w-full flex items-center gap-3 p-3 hover:bg-bambu-dark-tertiary/50 transition-colors text-left`,children:[a?(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray flex-shrink-0`}):(0,G.jsx)(ms,{className:`w-4 h-4 text-bambu-gray flex-shrink-0`}),(0,G.jsx)(`span`,{className:`px-2 py-0.5 text-xs font-mono font-semibold uppercase rounded border ${AGe[t]||`bg-gray-500/20 text-gray-400`}`,children:t}),(0,G.jsx)(`code`,{className:`text-sm text-white font-mono flex-1 truncate`,children:e}),n.summary&&(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray truncate max-w-[40%]`,children:n.summary})]}),a&&(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary p-4 space-y-4 bg-bambu-dark/50`,children:[n.description&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n.description}),x.length>0&&(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-white`,children:`Path Parameters`}),(0,G.jsx)(`div`,{className:`space-y-2`,children:x.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`label`,{className:`text-sm text-bambu-gray w-32 flex-shrink-0`,children:[e.name,e.required&&(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400 ml-1`,children:`*`})]}),(0,G.jsx)(`input`,{type:`text`,value:s[e.name]||``,onChange:t=>c(n=>({...n,[e.name]:t.target.value})),placeholder:e.description||e.schema?.type||`value`,className:`flex-1 px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm font-mono focus:border-bambu-green focus:outline-none`})]},e.name))})]}),S.length>0&&(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-white`,children:`Query Parameters`}),(0,G.jsx)(`div`,{className:`space-y-2`,children:S.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`label`,{className:`text-sm text-bambu-gray w-32 flex-shrink-0`,children:[e.name,e.required&&(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400 ml-1`,children:`*`})]}),e.schema?.enum?(0,G.jsxs)(`select`,{value:s[e.name]||``,onChange:t=>c(n=>({...n,[e.name]:t.target.value})),className:`flex-1 px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:``,children:`-- Select --`}),e.schema.enum.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]}):(0,G.jsx)(`input`,{type:`text`,value:s[e.name]||``,onChange:t=>c(n=>({...n,[e.name]:t.target.value})),placeholder:e.description||e.schema?.type||`value`,className:`flex-1 px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm font-mono focus:border-bambu-green focus:outline-none`})]},e.name))})]}),C&&(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-white`,children:`Request Body`}),(0,G.jsx)(`textarea`,{value:l,onChange:e=>u(e.target.value),rows:8,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm font-mono focus:border-bambu-green focus:outline-none resize-y`,placeholder:`JSON request body...`})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(Q,{onClick:v,disabled:p,children:[p?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Ml,{className:`w-4 h-4`}),`Execute`]}),_.length>0&&(0,G.jsxs)(`span`,{className:`text-xs text-yellow-700 dark:text-yellow-400 flex items-center gap-1`,children:[(0,G.jsx)(ys,{className:`w-3 h-3`}),`Fill in: `,_.join(`, `)]})]}),d&&(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`h4`,{className:`text-sm font-medium text-white flex items-center gap-2`,children:[`Response`,(0,G.jsxs)(`span`,{className:`px-2 py-0.5 text-xs rounded ${d.status>=200&&d.status<300?`bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-400`:d.status>=400?`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`:`bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`}`,children:[d.status,` `,d.statusText]}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[d.duration,`ms`]})]}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:b,children:h?(0,G.jsx)(xs,{className:`w-3 h-3 text-green-600 dark:text-green-400`}):(0,G.jsx)(Vs,{className:`w-3 h-3`})})]}),(0,G.jsx)(`pre`,{className:`p-3 bg-bambu-dark rounded-lg text-sm font-mono text-white overflow-auto max-h-96 border border-bambu-dark-tertiary`,children:typeof d.body==`string`?d.body:JSON.stringify(d.body,null,2)})]})]})]})}function NGe({apiKey:e=``}){let[t,n]=(0,y.useState)(null),[r,i]=(0,y.useState)(!0),[a,o]=(0,y.useState)(null),[s,c]=(0,y.useState)(new Set),[l,u]=(0,y.useState)(``);if((0,y.useEffect)(()=>{async function e(){try{let e=await fetch(`/openapi.json`);if(!e.ok)throw Error(`Failed to fetch OpenAPI schema`);n(await e.json())}catch(e){o(e instanceof Error?e.message:`Unknown error`)}finally{i(!1)}}e()},[]),r)return(0,G.jsx)(`div`,{className:`flex justify-center py-12`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})});if(a||!t)return(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-8`,children:(0,G.jsxs)(`div`,{className:`text-center text-red-700 dark:text-red-400`,children:[(0,G.jsx)(ys,{className:`w-12 h-12 mx-auto mb-3 opacity-50`}),(0,G.jsx)(`p`,{children:`Failed to load API schema`}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:a})]})})});let d={};for(let[e,n]of Object.entries(t.paths))for(let[t,r]of Object.entries(n)){if(t===`parameters`)continue;let n=r.tags||[`Other`];for(let i of n)d[i]||(d[i]=[]),d[i].push({path:e,method:t,spec:r})}let f=Object.entries(d).map(([e,t])=>l?{tag:e,endpoints:t.filter(({path:e,method:t,spec:n})=>{let r=l.toLowerCase();return e.toLowerCase().includes(r)||t.toLowerCase().includes(r)||(n.summary?.toLowerCase()||``).includes(r)||(n.description?.toLowerCase()||``).includes(r)})}:{tag:e,endpoints:t}).filter(({endpoints:e})=>e.length>0).sort((e,t)=>e.tag.localeCompare(t.tag)),p=e=>{c(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})};return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-4`,children:[(0,G.jsx)(`div`,{className:`flex-1`,children:(0,G.jsx)(`input`,{type:`text`,value:l,onChange:e=>u(e.target.value),placeholder:`Search endpoints...`,className:`w-full max-w-md px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>{c(new Set(f.map(e=>e.tag)))},children:`Expand All`}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>{c(new Set)},children:`Collapse All`}),(0,G.jsxs)(`a`,{href:`/docs`,target:`_blank`,rel:`noopener noreferrer`,className:`flex items-center gap-1 text-sm text-bambu-green hover:underline`,children:[(0,G.jsx)(nc,{className:`w-4 h-4`}),`Swagger UI`]})]})]}),(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[f.reduce((e,t)=>e+t.endpoints.length,0),` endpoints in `,f.length,` categories`]}),(0,G.jsx)(`div`,{className:`space-y-3`,children:f.map(({tag:n,endpoints:r})=>(0,G.jsxs)(Ld,{children:[(0,G.jsx)(`button`,{onClick:()=>p(n),className:`w-full flex items-center justify-between p-4 hover:bg-bambu-dark-tertiary/30 transition-colors text-left`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[s.has(n)?(0,G.jsx)(ps,{className:`w-5 h-5 text-bambu-gray`}):(0,G.jsx)(ms,{className:`w-5 h-5 text-bambu-gray`}),(0,G.jsx)(`h3`,{className:`text-base font-semibold text-white capitalize`,children:n.replace(/-/g,` `)}),(0,G.jsx)(`span`,{className:`text-xs bg-bambu-dark-tertiary px-2 py-0.5 rounded-full text-bambu-gray`,children:r.length})]})}),s.has(n)&&(0,G.jsx)(zd,{className:`pt-0 space-y-2`,children:r.map(({path:n,method:r,spec:i})=>(0,G.jsx)(MGe,{path:n,method:r,spec:i,schema:t,apiKey:e},`${r}-${n}`))})]},n))})]})}var PGe=[{id:`sidecar`,labelKey:`settings.sliceEngineSidecar`,descriptionKey:`settings.sliceEngineSidecarHint`,available:!0},{id:`browser`,labelKey:`settings.sliceEngineBrowser`,descriptionKey:`settings.sliceEngineBrowserHint`,available:!1}];function l5(){return PGe.filter(e=>e.available)}function FGe(){return l5().length>1}function u5(e){return l5().find(t=>t.id===e)?.id??`sidecar`}var IGe=[`general`,`plugs`,`sensors`,`notifications`,`queue`,`filament`,`network`,`apikeys`,`virtual-printer`,`spoolbuddy`,`failure-detection`,`users`,`backup`];s5({labelKey:`settings.general`,tab:`general`,keywords:`language date time format printer model printers cards`,anchor:`card-general`}),s5({labelKey:`settings.appearance`,tab:`general`,keywords:`theme dark light mode colors`,anchor:`card-appearance`}),s5({labelKey:`settings.archiveSettings`,tab:`general`,keywords:`archive auto save thumbnails captures`,anchor:`card-archive`}),s5({labelKey:`settings.camera`,tab:`general`,keywords:`camera external video stream`,anchor:`card-camera`}),s5({labelKey:`settings.costTracking`,tab:`general`,keywords:`currency filament cost energy kwh price`,anchor:`card-cost`}),s5({labelKey:`settings.fileManager`,tab:`general`,keywords:`file manager archive mode disk warning storage`,anchor:`card-filemanager`}),s5({labelKey:`settings.updates`,tab:`general`,keywords:`updates version firmware beta check`,anchor:`card-updates`}),s5({labelKey:`settings.dataManagement`,tab:`general`,keywords:`data reset clear logs notifications preferences`,anchor:`card-data`}),s5({labelKey:`settings.smartPlugs`,tab:`plugs`,keywords:`smart plug energy power automation tapo kasa tplink shelly`,anchor:`card-plugs`}),s5({labelKey:`haSensors.sectionTitle`,tab:`sensors`,keywords:`home assistant sensor printer temperature humidity alert notify block print`,anchor:`card-ha-sensors`}),s5({labelKey:`locationHaSensors.sectionTitle`,tab:`sensors`,keywords:`home assistant sensor location storage box temperature humidity battery alert notify`,anchor:`card-location-sensors`}),s5({labelKey:`settings.providers`,tab:`notifications`,keywords:`telegram discord email notification providers webhook`,anchor:`card-providers`}),s5({labelKey:`settings.messageTemplates`,tab:`notifications`,keywords:`message templates notification text edit`,anchor:`card-templates`}),s5({labelKey:`settings.defaultPrintOptions`,labelFallback:`Default Print Options`,tab:`queue`,keywords:`print bed leveling flow calibration vibration first layer timelapse`,anchor:`card-print-options`}),s5({labelKey:`settings.tempFanPresetsTitle`,labelFallback:`Temperature & Fan Presets`,tab:`queue`,keywords:`temperature fan presets nozzle bed chamber quick buttons popover`,anchor:`card-temp-fan-presets`}),s5({labelKey:`settings.staggeredStart`,labelFallback:`Staggered Start`,tab:`queue`,keywords:`staggered batch delay start queue group`,anchor:`card-staggered`}),s5({labelKey:`settings.plateClear`,labelFallback:`Plate-Clear Confirmation`,tab:`queue`,keywords:`plate clear confirm auto queue`,anchor:`card-plate`}),s5({labelKey:`settings.concurrentUploadsTitle`,labelFallback:`Concurrent Uploads`,tab:`queue`,keywords:`concurrent parallel upload transfer ftp queue slow farm simultaneous`,anchor:`card-concurrent-uploads`}),s5({labelKey:`settings.gcodeInjection`,labelFallback:`G-code Injection`,tab:`queue`,keywords:`gcode injection start end autoprint farmloop swapmod autoclear printflow`,anchor:`card-gcode`}),s5({labelKey:`settings.slicerCard`,labelFallback:`Slicer`,tab:`queue`,keywords:`slicer orcaslicer bambustudio orca bambu api sidecar url docker preferred`,anchor:`card-slicer`}),s5({labelKey:`settings.queueDrying`,tab:`queue`,keywords:`drying presets temperature time humidity ams`,anchor:`card-drying`}),s5({labelKey:`settings.filamentChecks`,tab:`filament`,keywords:`filament check warning runout remaining`,anchor:`card-filamentchecks`}),s5({labelKey:`settings.printModal`,tab:`filament`,keywords:`print modal custom mapping`,anchor:`card-printmodal`}),s5({labelKey:`settings.amsDisplayThresholds`,tab:`filament`,keywords:`ams humidity temperature threshold history retention`,anchor:`card-amsthresholds`}),s5({labelKey:`settings.externalUrl`,tab:`network`,keywords:`external url reverse proxy public notification link`,anchor:`card-externalurl`}),s5({labelKey:`settings.ftpRetry`,tab:`network`,keywords:`ftp retry upload retries backoff`,anchor:`card-ftpretry`}),s5({labelKey:`settings.homeAssistant`,tab:`network`,keywords:`home assistant ha hass mqtt integration`,anchor:`card-ha`}),s5({labelKey:`settings.mqttPublishing`,tab:`network`,keywords:`mqtt publish broker topic`,anchor:`card-mqtt`}),s5({labelKey:`settings.prometheusMetrics`,tab:`network`,keywords:`prometheus metrics grafana monitoring bearer token`,anchor:`card-prometheus`}),s5({labelKey:`settings.createNewApiKey`,tab:`apikeys`,keywords:`api key create permission scope`,anchor:`card-createapi`}),s5({labelKey:`settings.webhookEndpoints`,tab:`apikeys`,keywords:`webhook endpoint post http`,anchor:`card-webhooks`}),s5({labelKey:`settings.apiBrowser`,tab:`apikeys`,keywords:`api browser endpoint documentation test`,anchor:`card-apibrowser`}),s5({labelKey:`cameraTokens.title`,tab:`apikeys`,keywords:`camera token long-lived home assistant frigate kiosk stream`,anchor:`card-camera-tokens`}),s5({labelKey:`settings.tabs.virtualPrinter`,tab:`virtual-printer`,keywords:`virtual printer proxy archive slicer bambustudio orcaslicer ip bind`,anchor:`card-vp`}),s5({labelKey:`settings.tabs.spoolbuddy`,tab:`spoolbuddy`,keywords:`spoolbuddy device scale nfc rfid kiosk unregister`,anchor:`card-spoolbuddy`}),s5({labelKey:`settings.currentUser`,tab:`users`,subTab:`users`,keywords:`current user profile password change`,anchor:`card-currentuser`}),s5({labelKey:`settings.users`,tab:`users`,subTab:`users`,keywords:`users accounts list`,anchor:`card-users`}),s5({labelKey:`settings.groups`,tab:`users`,subTab:`users`,keywords:`groups roles permissions administrators operators viewers`,anchor:`card-groups`}),s5({labelKey:`settings.sessionPolicy.title`,labelFallback:`Session Policy`,tab:`users`,subTab:`users`,keywords:`session timeout expiry logout remember me jwt token lifetime`,anchor:`card-session-policy`}),s5({labelKey:`settings.email.smtpSettings`,labelFallback:`SMTP Configuration`,tab:`users`,subTab:`email`,keywords:`smtp email send server port password auth starttls ssl`,anchor:`card-smtp`}),s5({labelKey:`settings.ldap.title`,labelFallback:`LDAP Authentication`,tab:`users`,subTab:`ldap`,keywords:`ldap active directory ad authentication bind dn search base group mapping`,anchor:`card-ldap`}),s5({labelKey:`settings.tabs.backup`,tab:`backup`,keywords:`backup github restore download cloud sync profiles archives`,anchor:`card-backup`}),s5({labelKey:`externalLinks.sidebarLayout`,labelFallback:`Sidebar`,tab:`general`,keywords:`sidebar layout links pages hide show external custom navigation url add`,anchor:`card-sidebar-links`}),s5({labelKey:`settings.filamentTracking`,tab:`filament`,keywords:`spoolman filament tracking inventory sync remote integration`,anchor:`card-spoolman`}),s5({labelKey:`settings.catalog.spoolCatalog`,labelFallback:`Spool Catalog`,tab:`filament`,keywords:`spool catalog entries brand material reset import export`,anchor:`card-spool-catalog`}),s5({labelKey:`settings.colorCatalog.title`,labelFallback:`Color Catalog`,tab:`filament`,keywords:`color catalog hex swatch palette sync reset`,anchor:`card-color-catalog`}),s5({labelKey:`settings.tabs.failureDetection`,labelFallback:`Failure Detection`,tab:`failure-detection`,keywords:`failure detection ai ml obico spaghetti detect monitoring`,anchor:`card-fd-ml`}),s5({labelKey:`failureDetection.perPrinterTitle`,labelFallback:`Per-Printer Settings`,tab:`failure-detection`,keywords:`failure detection per printer enable per-printer sensitivity`,anchor:`card-fd-perprinter`}),s5({labelKey:`failureDetection.statusTitle`,labelFallback:`Detection Status`,tab:`failure-detection`,keywords:`failure detection status running connection`,anchor:`card-fd-status`}),s5({labelKey:`failureDetection.historyTitle`,labelFallback:`Detection History`,tab:`failure-detection`,keywords:`failure detection history log events`,anchor:`card-fd-history`}),s5({labelKey:`settings.email.advancedAuth`,labelFallback:`Advanced Email Authentication`,tab:`users`,subTab:`email`,keywords:`email authentication advanced password reset self-service forgot`,anchor:`card-email-advanced-auth`}),s5({labelKey:`settings.email.testConnection`,labelFallback:`Test SMTP Connection`,tab:`users`,subTab:`email`,keywords:`email smtp test connection send check`,anchor:`card-email-test`}),s5({labelKey:`settings.twoFa.totpTitle`,labelFallback:`Authenticator App (TOTP)`,tab:`users`,subTab:`twofa`,keywords:`two factor 2fa totp authenticator app google authy otp`,anchor:`card-2fa-totp`}),s5({labelKey:`settings.twoFa.emailOtpTitle`,labelFallback:`Email One-Time Codes`,tab:`users`,subTab:`twofa`,keywords:`two factor 2fa email otp one time code`,anchor:`card-2fa-emailotp`}),s5({labelKey:`settings.twoFa.linkedAccounts`,labelFallback:`Linked Accounts`,tab:`users`,subTab:`twofa`,keywords:`two factor 2fa linked accounts sso oidc provider google github`,anchor:`card-2fa-linked`}),s5({labelKey:`settings.oidc.title`,labelFallback:`Single Sign-On (OIDC)`,tab:`users`,subTab:`oidc`,keywords:`sso oidc openid single sign-on pocketid authentik keycloak google okta azure provider`,anchor:`card-oidc`}),s5({labelKey:`settings.ldap.serverConfig`,labelFallback:`LDAP Server Configuration`,tab:`users`,subTab:`ldap`,keywords:`ldap server url bind dn user search base group filter tls`,anchor:`card-ldap-server`}),s5({labelKey:`backup.githubBackup`,labelFallback:`GitHub Backup`,tab:`backup`,keywords:`github backup cloud remote sync profiles token`,anchor:`card-backup-github`}),s5({labelKey:`backup.history`,labelFallback:`Backup History`,tab:`backup`,keywords:`backup history log runs github commits`,anchor:`card-backup-history`}),s5({labelKey:`backup.localBackup`,labelFallback:`Local Backup`,tab:`backup`,keywords:`local backup download zip manual export`,anchor:`card-backup-local`}),s5({labelKey:`backup.scheduledBackup`,labelFallback:`Scheduled Backups`,tab:`backup`,keywords:`scheduled backup automatic hourly daily weekly retention local path`,anchor:`card-backup-scheduled`});var LGe=20,RGe={database:`bg-blue-600`,library_files:`bg-green-500`,library_thumbnails:`bg-teal-500`,library_other:`bg-emerald-700`,archive_timelapses:`bg-red-500`,archive_thumbnails:`bg-amber-500`,archive_files:`bg-sky-500`,virtual_printer_uploads:`bg-purple-500`,virtual_printer_upload_cache:`bg-fuchsia-500`,virtual_printer_certs:`bg-violet-500`,virtual_printer_other:`bg-purple-700`,downloads:`bg-cyan-500`,plate_calibration:`bg-lime-500`,logs:`bg-orange-500`,other_data:`bg-yellow-500`},zGe=[`bg-blue-500`,`bg-green-500`,`bg-yellow-500`,`bg-red-500`,`bg-orange-500`,`bg-teal-500`,`bg-cyan-500`,`bg-purple-500`],BGe=(e,t)=>RGe[e]||zGe[t%zGe.length],VGe={temperature:0,humidity:1,battery:2};function HGe(e,t){return e?BT(e,t,{decimals:2}):null}function UGe(){let e=co(),t=or(),[n,r]=Ri(),{t:i,i18n:a}=U(),{showToast:o}=Gd(),{authEnabled:s,user:c,isAdmin:l,refreshAuth:u,hasPermission:d}=jd(),{mode:f,resolvedMode:p,darkStyle:m,darkBackground:h,darkAccent:g,lightStyle:_,lightBackground:v,lightAccent:b,setMode:x,setDarkStyle:S,setDarkBackground:C,setDarkAccent:w,setLightStyle:T,setLightBackground:E,setLightAccent:D,progressInTitle:O,setProgressInTitle:k}=Pd(),[A,j]=(0,y.useState)(null),[M,N]=(0,y.useState)({}),[P,F]=(0,y.useState)(!1),[I,L]=(0,y.useState)(null),[R,z]=(0,y.useState)(!1),[B,V]=(0,y.useState)(null),[ee,te]=(0,y.useState)(!1),[ne,re]=(0,y.useState)(null),[ie,ae]=(0,y.useState)(!1),{colorize:oe,aboveColor:se,belowColor:H,optimalColor:ce}=TUe(),[le,ue]=(0,y.useState)(null),[de,fe]=(0,y.useState)(!1),[pe,me]=(0,y.useState)(null),[he,ge]=(0,y.useState)(null),[_e,ve]=(0,y.useState)(``),[ye,be]=(0,y.useState)(``),[xe,Se]=(0,y.useState)(!1),[Ce,we]=(0,y.useState)(!1),[Te,Ee]=(0,y.useState)(!1),[De,Oe]=(0,y.useState)(lm()),ke=n.get(`tab`),Ae=ke===`email`,[je,Me]=(0,y.useState)(Ae?`users`:ke&&IGe.includes(ke)?ke:`general`),[Ne,Pe]=(0,y.useState)(Ae?`email`:`users`),[Fe,Ie]=(0,y.useState)(ke===`queue`&&n.get(`sub`)===`pipelines`?`pipelines`:`dispatch`),Le=e=>{Me(e),e===`users`&&Pe(`users`),e===`queue`&&(Ie(`dispatch`),n.delete(`sub`)),e===`general`?n.delete(`tab`):n.set(`tab`,e),r(n,{replace:!0})},Re=e=>{Ie(e),e===`pipelines`?n.set(`sub`,`pipelines`):n.delete(`sub`),r(n,{replace:!0})},[ze,Be]=(0,y.useState)(!1),[Ve,He]=(0,y.useState)(``),[Ue,We]=(0,y.useState)({can_queue:!0,can_control_printer:!1,can_read_status:!0,can_manage_library:!0,can_manage_inventory:!0,can_manage_maintenance:!0,can_manage_archives:!0,can_manage_projects:!0,can_access_cloud:!1,can_update_energy_cost:!1}),[Ge,Ke]=(0,y.useState)(null),[qe,Je]=(0,y.useState)(!1),[Ye,Xe]=(0,y.useState)(null),[Ze,Qe]=(0,y.useState)(``),[$e,et]=(0,y.useState)(!1),[tt,nt]=(0,y.useState)(!1),[rt,it]=(0,y.useState)(null),[at,ot]=(0,y.useState)(!1),[st,ct]=(0,y.useState)(!1),[lt,ut]=(0,y.useState)(!1),[dt,ft]=(0,y.useState)({currentPassword:``,newPassword:``,confirmPassword:``}),[pt,mt]=(0,y.useState)(!1),[ht,gt]=(0,y.useState)(!1),[_t,vt]=(0,y.useState)(!1),[yt,bt]=(0,y.useState)(`local`),[xt,St]=(0,y.useState)(!1),[Ct,wt]=(0,y.useState)(null),[Tt,Et]=(0,y.useState)(null),[Dt,Ot]=(0,y.useState)(null),[At,jt]=(0,y.useState)(!1),[Mt,Nt]=(0,y.useState)({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]}),[Pt,Ft]=(0,y.useState)(null),[It,Lt]=(0,y.useState)(null),[Rt,zt]=(0,y.useState)(!1),[Bt,Vt]=(0,y.useState)({}),[Ht,Ut]=(0,y.useState)({}),Wt=e=>{Oe(e),xee(e),o(i(`settings.toast.settingsSaved`),`success`)},{data:Gt,isLoading:Kt}=K({queryKey:[`settings`],queryFn:Z.getSettings}),{data:qt,isLoading:Jt,isFetching:Yt}=K({queryKey:[`storage-usage`],queryFn:()=>Z.getStorageUsage(),enabled:je===`general`,staleTime:1/0,refetchInterval:!1,refetchOnWindowFocus:!1,refetchOnReconnect:!1}),Xt=async()=>{gt(!0);try{let t=await Z.getStorageUsage({refresh:!0});e.setQueryData([`storage-usage`],t)}catch(e){o(e instanceof Error?e.message:`Failed to refresh storage usage`,`error`)}finally{gt(!1)}},{data:Zt,isLoading:Qt}=K({queryKey:[`smart-plugs`],queryFn:Z.getSmartPlugs}),{data:$t,isLoading:en}=K({queryKey:[`smart-plugs-energy`,Zt?.map(e=>e.id)],queryFn:async()=>{if(!Zt||Zt.length===0)return null;let e=await Promise.all(Zt.filter(e=>e.enabled).map(async e=>{try{return{plug:e,status:await Z.getSmartPlugStatus(e.id)}}catch{return{plug:e,status:null}}})),t=0,n=0,r=0,i=0,a=0;for(let{plug:o,status:s}of e){let e=o.plug_type===`mqtt`&&s?.energy?.power!=null;(s?.reachable||e)&&(a++,s?.energy?.power!=null&&(t+=s.energy.power),s?.energy?.today!=null&&(n+=s.energy.today),s?.energy?.yesterday!=null&&(r+=s.energy.yesterday),s?.energy?.total!=null&&(i+=s.energy.total))}return{totalPower:t,totalToday:n,totalYesterday:r,totalLifetime:i,reachableCount:a,totalPlugs:Zt.filter(e=>e.enabled).length}},enabled:je===`plugs`&&!!Zt&&Zt.length>0,refetchInterval:je===`plugs`?1e4:!1}),{data:tn,isLoading:W}=K({queryKey:[`notification-providers`],queryFn:Z.getNotificationProviders}),{data:nn,isLoading:rn}=K({queryKey:[`api-keys`],queryFn:Z.getAPIKeys}),an=q({mutationFn:e=>Z.createAPIKey(e),onSuccess:t=>{Ke(t.key||null),Be(!1),He(``),e.invalidateQueries({queryKey:[`api-keys`]}),o(i(`settings.toast.apiKeyCreated`))},onError:e=>{o(`Failed to create API key: ${e.message}`,`error`)}}),on=q({mutationFn:e=>Z.deleteAPIKey(e),onSuccess:(t,n)=>{e.setQueryData([`api-keys`],e=>(e??[]).filter(e=>e.id!==n)),o(i(`settings.toast.apiKeyDeleted`))},onError:e=>{o(`Failed to delete API key: ${e.message}`,`error`)}}),{data:sn}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:cn}=K({queryKey:[`haSensors`],queryFn:()=>Z.getHASensors()}),{data:ln}=K({queryKey:[`locationHaSensors`],queryFn:()=>Z.getLocationHASensors()}),{data:un}=K({queryKey:T8,queryFn:Z.getLocations,enabled:je===`sensors`}),dn=Co({queries:(0,y.useMemo)(()=>Array.from(new Set((ln??[]).map(e=>e.location_id))),[ln]).map(e=>({queryKey:[`locationHaSensorReadings`,e],queryFn:()=>Z.getLocationHASensorReadings(e,!1),enabled:je===`sensors`,refetchInterval:je===`sensors`?(Gt?.location_sensor_poll_interval||120)*1e3:!1}))}),fn=(0,y.useMemo)(()=>{let e=new Map;for(let t of dn)for(let n of t.data??[])e.set(n.id,n);return e},[dn]),pn=q({mutationFn:async e=>{for(let t of e)await Z.deleteLocationHASensor(t)},onSuccess:()=>{o(i(`locationHaSensors.toast.deleted`),`success`)},onError:e=>{o(e.message,`error`)},onSettled:()=>{e.invalidateQueries({queryKey:[`locationHaSensors`]}),e.invalidateQueries({queryKey:[`locationHaSensorReadings`]}),ue(null)}}),mn=If(sn?.length??0),{data:hn,isLoading:gn}=K({queryKey:[`notification-templates`],queryFn:Z.getNotificationTemplates}),{data:_n}=K({queryKey:[`virtual-printer-settings`],queryFn:Sd.getSettings,refetchInterval:1e4}),vn=_n?.status?.running??!1,{data:yn}=K({queryKey:[`spoolbuddy-devices`],queryFn:()=>Dd.getDevices(),refetchInterval:15e3}),bn=yn?.length??0,xn=yn?.some(e=>e.online)??!1,{data:Sn}=K({queryKey:[`obico-status`],queryFn:Z.getObicoStatus,refetchInterval:15e3}),Cn=!!(Sn?.is_running&&Sn?.enabled),{data:wn}=K({queryKey:[`ffmpeg-status`],queryFn:Z.checkFfmpeg}),{data:Tn}=K({queryKey:[`version`],queryFn:Z.getVersion}),En=!s||d(`library:purge`),{data:Dn}=K({queryKey:[`library-trash-settings`],queryFn:()=>Z.getLibraryTrashSettings(),enabled:En}),On=q({mutationFn:e=>Z.updateLibraryTrashSettings(e),onSuccess:()=>{e.invalidateQueries({queryKey:[`library-trash-settings`]}),o(i(`settings.toast.settingsSaved`),`success`)},onError:e=>o(e.message||i(`libraryAutoPurge.saveFailed`),`error`)}),kn=e=>{Dn&&On.mutate({retention_days:Dn.retention_days,auto_purge_enabled:Dn.auto_purge_enabled,auto_purge_days:Dn.auto_purge_days,auto_purge_include_never_printed:Dn.auto_purge_include_never_printed,...e})},An=!s||d(`archives:purge`),{data:jn}=K({queryKey:[`archive-purge-settings`],queryFn:()=>Z.getArchivePurgeSettings(),enabled:An}),Mn=q({mutationFn:e=>Z.updateArchivePurgeSettings(e),onSuccess:()=>{e.invalidateQueries({queryKey:[`archive-purge-settings`]}),o(i(`settings.toast.settingsSaved`),`success`)},onError:e=>o(e.message||i(`archiveAutoPurge.saveFailed`),`error`)}),Nn=e=>{jn&&Mn.mutate({enabled:jn.enabled,days:jn.days,purge_stats:jn.purge_stats,...e})},{data:Pn,refetch:Fn,isRefetching:In}=K({queryKey:[`updateCheck`],queryFn:Z.checkForUpdates,enabled:Gt?.check_updates!==!1,staleTime:300*1e3}),{data:Ln,refetch:Rn}=K({queryKey:[`updateStatus`],queryFn:Z.getUpdateStatus,refetchInterval:e=>{let t=e.state.data;return t?.status===`downloading`||t?.status===`installing`?1e3:!1}}),{data:zn}=K({queryKey:[`mqtt-status`],queryFn:Z.getMQTTStatus,refetchInterval:je===`network`?5e3:!1}),{data:Bn}=K({queryKey:[`github-backup-status`],queryFn:Z.getGitHubBackupStatus}),{data:Vn}=K({queryKey:[`cloud-status`],queryFn:Z.getCloudStatus}),{data:Hn={advanced_auth_enabled:!1,smtp_configured:!1,local_login_enabled:!0,autologin_provider_id:null}}=K({queryKey:[`advancedAuthStatus`],queryFn:()=>Z.getAdvancedAuthStatus()}),{data:Un}=K({queryKey:[`ldapStatus`],queryFn:()=>Z.getLDAPStatus()}),{data:Wn}=K({queryKey:[`twoFAStatus`],queryFn:()=>Z.get2FAStatus()}),{data:Gn=[]}=K({queryKey:[`oidcProvidersAll`],queryFn:()=>Z.getOIDCProvidersAll(),enabled:l}),{data:Kn=[],isLoading:qn}=K({queryKey:[`users`],queryFn:()=>Z.getUsers(),enabled:s&&d(`users:read`)}),{data:Jn=[],isLoading:Yn}=K({queryKey:[`groups`],queryFn:()=>Z.getGroups(),enabled:s&&d(`groups:read`)}),Xn=q({mutationFn:e=>Z.createUser(e),onSuccess:()=>{e.invalidateQueries({queryKey:[`users`]}),e.invalidateQueries({queryKey:[`groups`]}),vt(!1),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]}),o(i(`settings.toast.userCreated`))},onError:e=>{o(e.message,`error`)}}),Zn=q({mutationFn:({id:e,data:t})=>Z.updateUser(e,t),onSuccess:()=>{e.invalidateQueries({queryKey:[`users`]}),e.invalidateQueries({queryKey:[`groups`]}),St(!1),wt(null),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]}),o(i(`settings.toast.userUpdated`))},onError:e=>{o(e.message,`error`)}}),Qn=q({mutationFn:({id:e,deleteItems:t})=>Z.deleteUser(e,t),onSuccess:()=>{e.invalidateQueries({queryKey:[`users`]}),o(i(`settings.toast.userDeleted`)),Et(null),Ot(null)},onError:e=>{o(e.message,`error`)}}),$n=q({mutationFn:e=>Z.resetUserPassword({user_id:e}),onSuccess:e=>{o(e.message,`success`)},onError:e=>{o(e.message,`error`)}}),er=async e=>{Et(e),jt(!0);try{Ot(await Z.getUserItemsCount(e))}catch{Ot({archives:0,queue_items:0,library_files:0})}finally{jt(!1)}},tr=q({mutationFn:e=>Z.deleteGroup(e),onSuccess:()=>{e.invalidateQueries({queryKey:[`groups`]}),o(i(`settings.toast.groupDeleted`))},onError:e=>{o(e.message,`error`)}}),nr=()=>{let e=Hn?.advanced_auth_enabled||!1;if(!Mt.username){o(i(`settings.toast.fillRequiredFields`),`error`);return}if(e&&!Mt.email){o(`Email is required when advanced authentication is enabled`,`error`);return}if(!e){if(!Mt.password){o(i(`settings.toast.fillRequiredFields`),`error`);return}if(Mt.password!==Mt.confirmPassword){o(i(`settings.toast.passwordsDoNotMatch`),`error`);return}let e=w8(Mt.password);if(e){o(i({tooShort:`settings.toast.passwordTooShort`,needsUppercase:`settings.toast.passwordNeedsUppercase`,needsLowercase:`settings.toast.passwordNeedsLowercase`,needsDigit:`settings.toast.passwordNeedsDigit`,needsSpecial:`settings.toast.passwordNeedsSpecial`}[e]),`error`);return}}Xn.mutate({username:Mt.username,password:e?void 0:Mt.password,email:Mt.email||void 0,role:Mt.role,group_ids:Mt.group_ids.length>0?Mt.group_ids:void 0})},rr=e=>{if(Mt.password){if(Mt.password!==Mt.confirmPassword){o(i(`settings.toast.passwordsDoNotMatch`),`error`);return}let e=w8(Mt.password);if(e){o(i({tooShort:`settings.toast.passwordTooShort`,needsUppercase:`settings.toast.passwordNeedsUppercase`,needsLowercase:`settings.toast.passwordNeedsLowercase`,needsDigit:`settings.toast.passwordNeedsDigit`,needsSpecial:`settings.toast.passwordNeedsSpecial`}[e]),`error`);return}}let t={username:Mt.username||void 0,password:Mt.password||void 0,email:Mt.email||void 0,role:Mt.role,group_ids:Mt.group_ids};t.password||delete t.password,Zn.mutate({id:e,data:t})},ir=e=>{wt(e.id),Nt({username:e.username,password:``,email:e.email||``,confirmPassword:``,role:e.role,group_ids:e.groups?.map(e=>e.id)||[]}),St(!0)},ar=e=>{Nt(t=>({...t,group_ids:t.group_ids.includes(e)?t.group_ids.filter(t=>t!==e):[...t.group_ids,e]}))},sr=q({mutationFn:Z.applyUpdate,onSuccess:e=>{e.is_ha_addon||e.is_docker||e.is_windows_installer?o(e.message,`error`):Rn()}}),[cr,lr]=(0,y.useState)(null),ur=q({mutationFn:Z.testAllNotificationProviders,onSuccess:t=>{lr(t),e.invalidateQueries({queryKey:[`notification-providers`]}),t.failed===0?o(`All ${t.tested} providers tested successfully!`,`success`):o(`${t.success}/${t.tested} providers succeeded`,t.failed>0?`error`:`success`)},onError:e=>{o(`Failed to test providers: ${e.message}`,`error`)}}),dr=q({mutationFn:async e=>{if(!Zt)return{success:0,failed:0};let t=Zt.filter(e=>e.enabled),n=await Promise.all(t.map(async t=>{try{return await Z.controlSmartPlug(t.id,e),{success:!0}}catch{return{success:!1}}}));return{success:n.filter(e=>e.success).length,failed:n.filter(e=>!e.success).length}},onSuccess:(t,n)=>{e.invalidateQueries({queryKey:[`smart-plugs`]}),e.invalidateQueries({queryKey:[`smart-plugs-energy`]}),t.failed===0?o(`All ${t.success} plugs turned ${n}`,`success`):o(`${t.success} plugs turned ${n}, ${t.failed} failed`,`error`)},onError:e=>{o(`Failed: ${e.message}`,`error`)}}),fr=(0,y.useRef)(null),pr=(0,y.useRef)(null),mr=(0,y.useRef)(!1),hr=(0,y.useRef)(!0),gr=(0,y.useRef)(null);(0,y.useEffect)(()=>{if(Gt&&!A){let e={...Gt,external_url:Gt.external_url||window.location.origin};gr.current=Gt,j(e),setTimeout(()=>{hr.current=!1},100)}},[Gt,A]),(0,y.useEffect)(()=>{let e=gr.current;if(!Gt||!A||!e||Gt===e)return;let t={};for(let n of Object.keys(Gt))Gt[n]!==e[n]&&A[n]===e[n]&&(t[n]=Gt[n]);gr.current=Gt,Object.keys(t).length>0&&j(e=>e&&{...e,...t})},[Gt,A]);let _r=q({mutationFn:Z.updateSettings,onSuccess:t=>{gr.current=t,e.setQueryData([`settings`],t),e.invalidateQueries({queryKey:[`archiveStats`]}),e.invalidateQueries({queryKey:[`ui-flags`]}),o(i(`settings.toast.settingsSaved`),`success`)},onError:e=>{o(`Failed to save: ${e.message}`,`error`)},onSettled:()=>{mr.current=!1}}),vr=q({mutationFn:({id:e,data:t})=>Z.updatePrinter(e,t),onSuccess:()=>{e.invalidateQueries({queryKey:[`printers`]}),o(i(`settings.toast.cameraSettingsSaved`),`success`)},onError:e=>{o(`Failed to update printer: ${e.message}`,`error`)}});(0,y.useEffect)(()=>{let e=gr.current;if(!(hr.current||!A||!Gt||!e)&&!(s&&!d(`settings:update`))&&(e.auto_archive!==A.auto_archive||e.save_thumbnails!==A.save_thumbnails||e.capture_finish_photo!==A.capture_finish_photo||(e.finish_photo_restore_plate??!0)!==(A.finish_photo_restore_plate??!0)||e.default_filament_cost!==A.default_filament_cost||e.currency!==A.currency||e.energy_cost_per_kwh!==A.energy_cost_per_kwh||e.energy_tracking_mode!==A.energy_tracking_mode||e.check_updates!==A.check_updates||(e.check_printer_firmware??!0)!==(A.check_printer_firmware??!0)||(e.include_beta_updates??!1)!==(A.include_beta_updates??!1)||(e.local_login_enabled??!0)!==(A.local_login_enabled??!0)||e.notification_language!==A.notification_language||(e.bed_cooled_threshold??35)!==(A.bed_cooled_threshold??35)||e.ams_humidity_good!==A.ams_humidity_good||e.ams_humidity_fair!==A.ams_humidity_fair||e.ams_temp_good!==A.ams_temp_good||e.ams_temp_fair!==A.ams_temp_fair||(e.ams_temp_alarm??null)!==(A.ams_temp_alarm??null)||e.ams_history_retention_days!==A.ams_history_retention_days||e.disable_filament_warnings!==A.disable_filament_warnings||e.prefer_lowest_filament!==A.prefer_lowest_filament||(e.queue_drying_enabled??!1)!==(A.queue_drying_enabled??!1)||(e.queue_drying_block??!1)!==(A.queue_drying_block??!1)||(e.ambient_drying_enabled??!1)!==(A.ambient_drying_enabled??!1)||(e.print_drying_enabled??!1)!==(A.print_drying_enabled??!1)||(e.drying_presets??``)!==(A.drying_presets??``)||(e.ams_humidity_thresholds??``)!==(A.ams_humidity_thresholds??``)||e.per_printer_mapping_expanded!==A.per_printer_mapping_expanded||e.date_format!==A.date_format||e.time_format!==A.time_format||e.default_printer_id!==A.default_printer_id||e.ftp_retry_enabled!==A.ftp_retry_enabled||e.ftp_retry_count!==A.ftp_retry_count||e.ftp_retry_delay!==A.ftp_retry_delay||e.ftp_timeout!==A.ftp_timeout||e.mqtt_enabled!==A.mqtt_enabled||e.mqtt_broker!==A.mqtt_broker||e.mqtt_port!==A.mqtt_port||e.mqtt_username!==A.mqtt_username||e.mqtt_password!==A.mqtt_password||e.mqtt_topic_prefix!==A.mqtt_topic_prefix||e.mqtt_use_tls!==A.mqtt_use_tls||e.external_url!==A.external_url||e.ha_enabled!==A.ha_enabled||e.ha_url!==A.ha_url||e.ha_token!==A.ha_token||(e.library_archive_mode??`ask`)!==(A.library_archive_mode??`ask`)||Number(e.library_disk_warning_gb??5)!==Number(A.library_disk_warning_gb??5)||(e.preferred_slicer??`bambu_studio`)!==(A.preferred_slicer??`bambu_studio`)||u5(e.slice_engine)!==u5(A.slice_engine)||(e.open_in_slicer??null)!==(A.open_in_slicer??null)||(e.use_slicer_api??!1)!==(A.use_slicer_api??!1)||(e.orcaslicer_api_url??``)!==(A.orcaslicer_api_url??``)||(e.slicer_stall_timeout_minutes??15)!==(A.slicer_stall_timeout_minutes??15)||(e.bambu_studio_api_url??``)!==(A.bambu_studio_api_url??``)||e.prometheus_enabled!==A.prometheus_enabled||e.prometheus_token!==A.prometheus_token||(e.user_notifications_enabled??!0)!==(A.user_notifications_enabled??!0)||(e.default_bed_levelling??`auto`)!==(A.default_bed_levelling??`auto`)||(e.default_flow_cali??`auto`)!==(A.default_flow_cali??`auto`)||(e.default_vibration_cali??!0)!==(A.default_vibration_cali??!0)||(e.default_layer_inspect??!1)!==(A.default_layer_inspect??!1)||(e.default_timelapse??!1)!==(A.default_timelapse??!1)||(e.default_nozzle_offset_cali??`auto`)!==(A.default_nozzle_offset_cali??`auto`)||(e.stagger_group_size??2)!==(A.stagger_group_size??2)||(e.stagger_interval_minutes??5)!==(A.stagger_interval_minutes??5)||(e.require_plate_clear??!1)!==(A.require_plate_clear??!1)||(e.queue_max_concurrent_uploads??4)!==(A.queue_max_concurrent_uploads??4)||(e.preheat_enabled??!1)!==(A.preheat_enabled??!1)||(e.preheat_filament_targets??``)!==(A.preheat_filament_targets??``)||(e.preheat_max_wait_seconds??900)!==(A.preheat_max_wait_seconds??900)||(e.preheat_soak_seconds??300)!==(A.preheat_soak_seconds??300)||(e.queue_keep_bed_warm??!1)!==(A.queue_keep_bed_warm??!1)||(e.queue_keep_warm_bed_temp??90)!==(A.queue_keep_warm_bed_temp??90)||(e.queue_keep_warm_max_minutes??120)!==(A.queue_keep_warm_max_minutes??120)||(e.nozzle_temp_presets??``)!==(A.nozzle_temp_presets??``)||(e.bed_temp_presets??``)!==(A.bed_temp_presets??``)||(e.chamber_temp_presets??``)!==(A.chamber_temp_presets??``)||(e.fan_speed_presets??``)!==(A.fan_speed_presets??``)||(e.session_max_hours??24)!==(A.session_max_hours??24)||(e.billing_enabled??!1)!==(A.billing_enabled??!1)||(e.printer_kill_switch_enabled??!1)!==(A.printer_kill_switch_enabled??!1)||(e.finance_budget_reset_day??1)!==(A.finance_budget_reset_day??1)||(e.finance_budget_reset_timezone??`UTC`)!==(A.finance_budget_reset_timezone??`UTC`))&&!mr.current)return fr.current&&clearTimeout(fr.current),fr.current=setTimeout(()=>{if(mr.current)return;mr.current=!0;let e={auto_archive:A.auto_archive,save_thumbnails:A.save_thumbnails,capture_finish_photo:A.capture_finish_photo,finish_photo_restore_plate:A.finish_photo_restore_plate??!0,default_filament_cost:A.default_filament_cost,currency:A.currency,energy_cost_per_kwh:A.energy_cost_per_kwh,energy_tracking_mode:A.energy_tracking_mode,check_updates:A.check_updates,check_printer_firmware:A.check_printer_firmware,include_beta_updates:A.include_beta_updates,local_login_enabled:A.local_login_enabled,notification_language:A.notification_language,bed_cooled_threshold:A.bed_cooled_threshold,ams_humidity_good:A.ams_humidity_good,ams_humidity_fair:A.ams_humidity_fair,ams_temp_good:A.ams_temp_good,ams_temp_fair:A.ams_temp_fair,ams_temp_alarm:A.ams_temp_alarm??null,ams_history_retention_days:A.ams_history_retention_days,disable_filament_warnings:A.disable_filament_warnings,prefer_lowest_filament:A.prefer_lowest_filament,queue_drying_enabled:A.queue_drying_enabled,queue_drying_block:A.queue_drying_block,ambient_drying_enabled:A.ambient_drying_enabled,print_drying_enabled:A.print_drying_enabled,drying_presets:A.drying_presets,ams_humidity_thresholds:A.ams_humidity_thresholds,per_printer_mapping_expanded:A.per_printer_mapping_expanded,date_format:A.date_format,time_format:A.time_format,default_printer_id:A.default_printer_id,ftp_retry_enabled:A.ftp_retry_enabled,ftp_retry_count:A.ftp_retry_count,ftp_retry_delay:A.ftp_retry_delay,ftp_timeout:A.ftp_timeout,mqtt_enabled:A.mqtt_enabled,mqtt_broker:A.mqtt_broker,mqtt_port:A.mqtt_port,mqtt_username:A.mqtt_username,mqtt_password:A.mqtt_password,mqtt_topic_prefix:A.mqtt_topic_prefix,mqtt_use_tls:A.mqtt_use_tls,external_url:A.external_url,ha_enabled:A.ha_enabled,ha_url:A.ha_url,ha_token:A.ha_token,library_archive_mode:A.library_archive_mode,library_disk_warning_gb:A.library_disk_warning_gb,preferred_slicer:A.preferred_slicer,slice_engine:A.slice_engine,open_in_slicer:A.open_in_slicer,use_slicer_api:A.use_slicer_api,orcaslicer_api_url:A.orcaslicer_api_url,slicer_stall_timeout_minutes:A.slicer_stall_timeout_minutes,bambu_studio_api_url:A.bambu_studio_api_url,prometheus_enabled:A.prometheus_enabled,prometheus_token:A.prometheus_token,user_notifications_enabled:A.user_notifications_enabled,default_bed_levelling:A.default_bed_levelling,default_flow_cali:A.default_flow_cali,default_vibration_cali:A.default_vibration_cali,default_layer_inspect:A.default_layer_inspect,default_timelapse:A.default_timelapse,default_nozzle_offset_cali:A.default_nozzle_offset_cali,stagger_group_size:A.stagger_group_size,stagger_interval_minutes:A.stagger_interval_minutes,require_plate_clear:A.require_plate_clear,queue_max_concurrent_uploads:A.queue_max_concurrent_uploads,preheat_enabled:A.preheat_enabled,preheat_filament_targets:A.preheat_filament_targets,preheat_max_wait_seconds:A.preheat_max_wait_seconds,preheat_soak_seconds:A.preheat_soak_seconds,queue_keep_bed_warm:A.queue_keep_bed_warm,queue_keep_warm_bed_temp:A.queue_keep_warm_bed_temp,queue_keep_warm_max_minutes:A.queue_keep_warm_max_minutes,nozzle_temp_presets:A.nozzle_temp_presets,bed_temp_presets:A.bed_temp_presets,chamber_temp_presets:A.chamber_temp_presets,fan_speed_presets:A.fan_speed_presets,session_max_hours:A.session_max_hours,billing_enabled:A.billing_enabled,printer_kill_switch_enabled:A.printer_kill_switch_enabled,finance_budget_reset_day:A.finance_budget_reset_day,finance_budget_reset_timezone:A.finance_budget_reset_timezone};_r.mutate(e)},500),()=>{fr.current&&clearTimeout(fr.current)}},[A,Gt,_r,s,d,o,i]);let yr=(0,y.useCallback)((e,t)=>{if(s&&!d(`settings:update`)){o(i(`settings.toast.noPermissionUpdate`),`error`);return}j(n=>n?{...n,[e]:t}:null)},[s,d,o,i]),br=async(e,t,n)=>{if(!t){o(i(`settings.toast.enterCameraUrl`),`error`);return}Ut(t=>({...t,[e]:!0})),Vt(t=>({...t,[e]:null}));try{let r=await Z.testExternalCamera(e,t,n);Vt(t=>({...t,[e]:r})),r.success?o(r.coalesced?i(`settings.toast.cameraConnectedCoalesced`,{resolution:r.resolution||``}):i(`settings.toast.cameraConnected`,{resolution:r.resolution||``}),`success`):o(r.error||i(`settings.toast.connectionFailed`),`error`)}catch(t){let n=t instanceof Error?t.message:i(`settings.toast.testFailed`);Vt(t=>({...t,[e]:{success:!1,error:n}})),o(n,`error`)}finally{Ut(t=>({...t,[e]:!1}))}},[xr,Sr]=(0,y.useState)({}),Cr=(0,y.useRef)({}),wr=(0,y.useRef)(new Set),[Tr,Er]=(0,y.useState)({}),Dr=(0,y.useRef)({}),Or=(0,y.useRef)(new Set);(0,y.useEffect)(()=>{if(sn){let e={},t={};sn.forEach(n=>{n.external_camera_url&&!wr.current.has(n.id)&&(e[n.id]=n.external_camera_url,wr.current.add(n.id)),n.external_camera_snapshot_url&&!Or.current.has(n.id)&&(t[n.id]=n.external_camera_snapshot_url,Or.current.add(n.id))}),Object.keys(e).length>0&&Sr(t=>({...t,...e})),Object.keys(t).length>0&&Er(e=>({...e,...t}))}},[sn]);let kr=(e,t)=>{Sr(n=>({...n,[e]:t})),Cr.current[e]&&clearTimeout(Cr.current[e]),Cr.current[e]=setTimeout(()=>{vr.mutate({id:e,data:{external_camera_url:t||null}})},800)},Ar=(e,t)=>{Er(n=>({...n,[e]:t})),Dr.current[e]&&clearTimeout(Dr.current[e]),Dr.current[e]=setTimeout(()=>{vr.mutate({id:e,data:{external_camera_snapshot_url:t||null}})},800)},jr=(e,t)=>{let n={};t.type!==void 0&&(n.external_camera_type=t.type||null),t.enabled!==void 0&&(n.external_camera_enabled=t.enabled),t.rotation!==void 0&&(n.camera_rotation=t.rotation),vr.mutate({id:e,data:n})};if(Kt||!A)return(0,G.jsx)(`div`,{className:`p-4 md:p-8 flex justify-center`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})});let Mr=OGe().map(e=>({...e,label:i(e.labelKey,e.labelFallback??e.labelKey)})),Nr=ye.trim().toLowerCase(),Pr=Nr?Mr.filter(e=>e.label.toLowerCase().includes(Nr)||e.keywords.toLowerCase().includes(Nr)).slice(0,8):[],Fr=e=>{Le(e.tab),e.subTab&&Pe(e.subTab),be(``),setTimeout(()=>{let t=document.getElementById(e.anchor);t&&(t.scrollIntoView({behavior:`smooth`,block:`start`}),t.classList.add(`ring-2`,`ring-bambu-green`),setTimeout(()=>t.classList.remove(`ring-2`,`ring-bambu-green`),1500))},50)},Ir=(A?.docker_compose_dir??``).trim()||(Pn?.compose_dir_detected??``),Lr=Ir?`cd ${/\s/.test(Ir)?`"${Ir}"`:Ir} && docker compose pull && docker compose up -d`:`docker compose pull && docker compose up -d`;return(0,G.jsx)(Id,{density:`dense`,children:(0,G.jsxs)(`div`,{className:`p-4 md:p-8`,children:[(0,G.jsxs)(`div`,{className:`mb-4 flex flex-col sm:flex-row sm:items-center sm:justify-between gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(nu,{className:`w-7 h-7 text-bambu-green`}),i(`settings.title`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:i(`settings.configureBambuddy`)})]}),(0,G.jsxs)(`div`,{className:`relative sm:w-72`,children:[(0,G.jsx)(Zl,{className:`w-4 h-4 text-bambu-gray absolute left-3 top-1/2 -translate-y-1/2 pointer-events-none`}),(0,G.jsx)(`input`,{type:`text`,value:ye,onChange:e=>be(e.target.value),placeholder:i(`settings.searchPlaceholder`,`Search settings…`),className:`w-full pl-9 pr-8 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`}),ye&&(0,G.jsx)(`button`,{onClick:()=>be(``),className:`absolute right-2 top-1/2 -translate-y-1/2 p-1 text-bambu-gray hover:text-white`,"aria-label":`Clear`,children:(0,G.jsx)(td,{className:`w-3.5 h-3.5`})}),Pr.length>0&&(0,G.jsx)(`div`,{className:`absolute top-full left-0 right-0 mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl z-30 overflow-hidden`,children:Pr.map(e=>(0,G.jsxs)(`button`,{onClick:()=>Fr(e),className:`w-full px-3 py-2 text-left hover:bg-bambu-dark-tertiary transition-colors border-b border-bambu-dark-tertiary last:border-b-0`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:e.label}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[i(`settings.tabs.${e.tab===`virtual-printer`?`virtualPrinter`:e.tab===`failure-detection`?`failureDetection`:e.tab}`),e.subTab?` › ${i(`settings.tabs.${e.subTab}`,e.subTab)}`:``]})]},e.anchor))}),Nr&&Pr.length===0&&(0,G.jsx)(`div`,{className:`absolute top-full left-0 right-0 mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl z-30 p-3`,children:(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray italic`,children:i(`settings.noSearchResults`,`No matching settings.`)})})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-col lg:flex-row gap-4 lg:gap-6`,children:[(0,G.jsxs)(`nav`,{className:`flex flex-wrap gap-1 border-b border-bambu-dark-tertiary lg:flex-col lg:flex-nowrap lg:gap-0 lg:border-b-0 lg:border-r lg:w-48 lg:flex-shrink-0 lg:self-start lg:sticky lg:top-4`,children:[(0,G.jsxs)(`button`,{onClick:()=>Le(`general`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`general`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(nu,{className:`w-4 h-4`}),i(`settings.tabs.general`)]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`plugs`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`plugs`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Nl,{className:`w-4 h-4`}),i(`settings.tabs.smartPlugs`),Zt&&Zt.length>0&&(0,G.jsx)(`span`,{className:`text-xs bg-bambu-dark-tertiary px-1.5 py-0.5 rounded-full`,children:Zt.length})]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`sensors`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`sensors`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(wc,{className:`w-4 h-4`}),i(`settings.tabs.sensors`),(cn?.length??0)+(ln?.length??0)>0&&(0,G.jsx)(`span`,{className:`text-xs bg-bambu-dark-tertiary px-1.5 py-0.5 rounded-full`,children:(cn?.length??0)+(ln?.length??0)})]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`notifications`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`notifications`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(qo,{className:`w-4 h-4`}),i(`settings.tabs.notifications`),tn&&tn.length>0&&(0,G.jsx)(`span`,{className:`text-xs bg-bambu-dark-tertiary px-1.5 py-0.5 rounded-full`,children:tn.length})]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`queue`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`queue`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Zc,{className:`w-4 h-4`}),i(`settings.tabs.queue`,`Workflow`)]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`filament`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`filament`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Us,{className:`w-4 h-4`}),i(`settings.tabs.filament`)]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`network`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`network`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Zu,{className:`w-4 h-4`}),i(`settings.tabs.network`),(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full ${zn?.enabled?`bg-green-400`:`bg-gray-500`}`})]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`apikeys`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`apikeys`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Gc,{className:`w-4 h-4`}),i(`settings.tabs.apiKeys`),nn&&nn.length>0&&(0,G.jsx)(`span`,{className:`text-xs bg-bambu-dark-tertiary px-1.5 py-0.5 rounded-full`,children:nn.length})]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`virtual-printer`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`virtual-printer`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Ll,{className:`w-4 h-4`}),i(`settings.tabs.virtualPrinter`),(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full ${vn?`bg-green-400`:`bg-gray-500`}`})]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`spoolbuddy`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`spoolbuddy`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(ql,{className:`w-4 h-4`}),i(`settings.tabs.spoolbuddy`),bn>0&&(0,G.jsx)(`span`,{className:`text-xs bg-bambu-dark-tertiary px-1.5 py-0.5 rounded-full`,children:bn}),(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full ${xn?`bg-green-400`:`bg-gray-500`}`})]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`failure-detection`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`failure-detection`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Jl,{className:`w-4 h-4`}),i(`settings.tabs.failureDetection`),(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full ${Cn?`bg-green-400`:`bg-gray-500`}`})]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`users`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`users`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Hu,{className:`w-4 h-4`}),i(`settings.tabs.users`),s&&(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full bg-green-400`})]}),(0,G.jsxs)(`button`,{onClick:()=>Le(`backup`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${je===`backup`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Ws,{className:`w-4 h-4`}),i(`settings.tabs.backup`),(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full ${Vn?.is_authenticated&&Bn?.configured&&Bn?.enabled||Gt?.local_backup_enabled?`bg-green-400`:`bg-gray-500`}`})]})]}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[je===`general`&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`a`,{href:Lf(mn,`app-settings`),target:`_blank`,rel:`noopener noreferrer`,className:`group block mb-4 lg:mb-6 rounded-xl border border-bambu-green/30 bg-gradient-to-br from-bambu-green/15 via-bambu-green/5 to-transparent hover:border-bambu-green/50 hover:from-bambu-green/20 transition-colors`,children:(0,G.jsxs)(`div`,{className:`flex flex-col md:flex-row items-start md:items-center gap-4 p-4 md:p-5`,children:[(0,G.jsx)(`div`,{className:`p-3 rounded-lg bg-bambu-green/20 text-bambu-green flex-shrink-0`,children:mn===`business`?(0,G.jsx)(Qo,{className:`w-6 h-6`}):(0,G.jsx)(Lc,{className:`w-6 h-6`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-base font-semibold text-white`,children:mn===`business`?i(`sponsors.businessTitle`,`Bambuddy for business`):i(`sponsors.sectionTitle`,`Independent & community-funded`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-0.5`,children:mn===`business`?i(`sponsors.businessTagline`,`You're running {{count}} printers. Priority support, commercial licensing and invoicing are available for teams and print farms.`,{count:sn?.length??0}):i(`sponsors.tagline`,`Bambuddy is free and stays that way because people choose to support it. No VC, no cloud lock-in.`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 px-4 py-2 rounded-lg bg-bambu-green/20 text-bambu-green group-hover:bg-bambu-green/30 text-sm font-medium whitespace-nowrap self-start md:self-auto`,children:[mn===`business`?i(`sponsors.businessCta`,`Bambuddy for business`):i(`sponsors.viewSupporters`,`View supporters`),(0,G.jsx)(nc,{className:`w-4 h-4`})]})]})}),(0,G.jsxs)(`div`,{className:`flex flex-col lg:flex-row gap-4 lg:gap-6`,children:[(0,G.jsxs)(`div`,{className:`space-y-3 flex-1 lg:max-w-xl`,children:[(0,G.jsxs)(Ld,{id:`card-general`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.general`)})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[(0,G.jsx)(kc,{className:`w-4 h-4 inline mr-1`}),i(`settings.language`)]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`select`,{value:a.language,onChange:e=>{let t=e.target.value;if(s&&!d(`settings:update`)){o(i(`settings.toast.noPermissionUpdate`),`error`);return}a.changeLanguage(t),_r.mutate({language:t})},className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:kt.map(e=>(0,G.jsxs)(`option`,{value:e.code,children:[e.nativeName,` (`,e.name,`)`]},e.code))}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.languageDescription`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.defaultView`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`select`,{value:De,onChange:e=>Wt(e.target.value),className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:cm.map(e=>(0,G.jsx)(`option`,{value:e.to,children:i(e.labelKey)},e.id))}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.defaultViewDescription`)})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.dateFormat`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:A.date_format||`system`,onChange:e=>yr(`date_format`,e.target.value),className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:[(0,G.jsx)(`option`,{value:`system`,children:i(`settings.systemDefault`)}),(0,G.jsx)(`option`,{value:`us`,children:i(`settings.dateFormatUs`)}),(0,G.jsx)(`option`,{value:`eu`,children:i(`settings.dateFormatEu`)}),(0,G.jsx)(`option`,{value:`iso`,children:i(`settings.dateFormatIso`)})]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.timeFormat`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:A.time_format||`system`,onChange:e=>yr(`time_format`,e.target.value),className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:[(0,G.jsx)(`option`,{value:`system`,children:i(`settings.systemDefault`)}),(0,G.jsx)(`option`,{value:`12h`,children:i(`settings.timeFormat12`)}),(0,G.jsx)(`option`,{value:`24h`,children:i(`settings.timeFormat24`)})]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.defaultPrinter`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:A.default_printer_id??``,onChange:e=>yr(`default_printer_id`,e.target.value?Number(e.target.value):null),className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:[(0,G.jsx)(`option`,{value:``,children:i(`settings.noDefaultPrinter`)}),sn?.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.defaultPrinterDescription`)})]})]})]}),(0,G.jsxs)(Ld,{id:`card-appearance`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Cl,{className:`w-5 h-5`}),i(`settings.appearance`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-2`,children:[(0,G.jsxs)(`label`,{className:`text-sm text-bambu-gray`,children:[i(`settings.theme`),`:`]}),(0,G.jsx)(`div`,{className:`flex gap-1`,children:[{id:`dark`,label:i(`settings.themeDark`)},{id:`light`,label:i(`settings.themeLight`)},{id:`system`,label:i(`settings.themeSystem`)}].map(({id:e,label:t})=>(0,G.jsx)(`button`,{onClick:()=>{x(e),o(i(`settings.toast.settingsSaved`),`success`)},className:`px-3 py-1 text-xs rounded-lg border transition-colors ${f===e?`border-bambu-green bg-bambu-green/10 text-bambu-green`:`border-gray-300 dark:border-bambu-dark-tertiary text-gray-500 dark:text-bambu-gray hover:text-gray-900 dark:hover:text-white cursor-pointer`}`,children:t},e))})]}),(0,G.jsxs)(`div`,{className:`space-y-3 p-4 rounded-lg border ${p===`dark`?`border-bambu-green bg-bambu-green/5`:`border-bambu-dark-tertiary`}`,children:[(0,G.jsxs)(`h3`,{className:`text-sm font-medium text-white flex items-center gap-2`,children:[i(`settings.darkMode`),p===`dark`&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-green`,children:i(`settings.active`)})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-3 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.background`)}),(0,G.jsxs)(`select`,{value:h,onChange:e=>{C(e.target.value),o(i(`settings.toast.settingsSaved`),`success`)},className:`w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`neutral`,children:i(`settings.bgNeutral`)}),(0,G.jsx)(`option`,{value:`warm`,children:i(`settings.bgWarm`)}),(0,G.jsx)(`option`,{value:`cool`,children:i(`settings.bgCool`)}),(0,G.jsx)(`option`,{value:`oled`,children:i(`settings.bgOled`)}),(0,G.jsx)(`option`,{value:`slate`,children:i(`settings.bgSlate`)}),(0,G.jsx)(`option`,{value:`forest`,children:i(`settings.bgForest`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.accent`)}),(0,G.jsxs)(`select`,{value:g,onChange:e=>{w(e.target.value),o(i(`settings.toast.settingsSaved`),`success`)},className:`w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`green`,children:i(`settings.accentGreen`)}),(0,G.jsx)(`option`,{value:`teal`,children:i(`settings.accentTeal`)}),(0,G.jsx)(`option`,{value:`blue`,children:i(`settings.accentBlue`)}),(0,G.jsx)(`option`,{value:`orange`,children:i(`settings.accentOrange`)}),(0,G.jsx)(`option`,{value:`purple`,children:i(`settings.accentPurple`)}),(0,G.jsx)(`option`,{value:`red`,children:i(`settings.accentRed`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.style`)}),(0,G.jsxs)(`select`,{value:m,onChange:e=>{S(e.target.value),o(i(`settings.toast.settingsSaved`),`success`)},className:`w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`classic`,children:i(`settings.styleClassic`)}),(0,G.jsx)(`option`,{value:`glow`,children:i(`settings.styleGlow`)}),(0,G.jsx)(`option`,{value:`vibrant`,children:i(`settings.styleVibrant`)})]})]})]})]}),(0,G.jsxs)(`div`,{className:`space-y-3 p-4 rounded-lg border ${p===`light`?`border-bambu-green bg-bambu-green/5`:`border-bambu-dark-tertiary`}`,children:[(0,G.jsxs)(`h3`,{className:`text-sm font-medium text-white flex items-center gap-2`,children:[i(`settings.lightMode`),p===`light`&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-green`,children:i(`settings.active`)})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-3 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.background`)}),(0,G.jsxs)(`select`,{value:v,onChange:e=>{E(e.target.value),o(i(`settings.toast.settingsSaved`),`success`)},className:`w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`neutral`,children:i(`settings.bgNeutral`)}),(0,G.jsx)(`option`,{value:`warm`,children:i(`settings.bgWarm`)}),(0,G.jsx)(`option`,{value:`cool`,children:i(`settings.bgCool`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.accent`)}),(0,G.jsxs)(`select`,{value:b,onChange:e=>{D(e.target.value),o(i(`settings.toast.settingsSaved`),`success`)},className:`w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`green`,children:i(`settings.accentGreen`)}),(0,G.jsx)(`option`,{value:`teal`,children:i(`settings.accentTeal`)}),(0,G.jsx)(`option`,{value:`blue`,children:i(`settings.accentBlue`)}),(0,G.jsx)(`option`,{value:`orange`,children:i(`settings.accentOrange`)}),(0,G.jsx)(`option`,{value:`purple`,children:i(`settings.accentPurple`)}),(0,G.jsx)(`option`,{value:`red`,children:i(`settings.accentRed`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.style`)}),(0,G.jsxs)(`select`,{value:_,onChange:e=>{T(e.target.value),o(i(`settings.toast.settingsSaved`),`success`)},className:`w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`classic`,children:i(`settings.styleClassic`)}),(0,G.jsx)(`option`,{value:`glow`,children:i(`settings.styleGlow`)}),(0,G.jsx)(`option`,{value:`vibrant`,children:i(`settings.styleVibrant`)})]})]})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.themeToggleHint`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.progressInTitle`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.progressInTitleDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:O,onChange:e=>{k(e.target.checked),o(i(`settings.toast.settingsSaved`),`success`)},className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]})]})]}),(0,G.jsxs)(Ld,{id:`card-archive`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.archiveSettings`)})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.autoArchivePrints`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.autoArchiveDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.auto_archive,onChange:e=>yr(`auto_archive`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.saveThumbnails`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.saveThumbnailsDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.save_thumbnails,onChange:e=>yr(`save_thumbnails`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.captureFinishPhoto`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.captureFinishPhotoDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.capture_finish_photo,onChange:e=>yr(`capture_finish_photo`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),A.capture_finish_photo&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between pl-4 border-l-2 border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.finishPhotoRestorePlate`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.finishPhotoRestorePlateDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.finish_photo_restore_plate??!0,onChange:e=>yr(`finish_photo_restore_plate`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),A.capture_finish_photo&&wn&&!wn.installed&&(0,G.jsxs)(`div`,{className:`flex items-start gap-2 p-3 bg-yellow-500/10 border border-yellow-500/30 rounded-lg`,children:[(0,G.jsx)(Iu,{className:`w-5 h-5 text-yellow-500 flex-shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{className:`text-sm`,children:[(0,G.jsx)(`p`,{className:`text-yellow-500 font-medium`,children:i(`settings.ffmpegNotInstalled`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:i(`settings.ffmpegRequired`)})]})]}),An&&jn&&(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary pt-3 mt-3 space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`archiveAutoPurge.enableLabel`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`archiveAutoPurge.enableDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:jn.enabled,onChange:e=>Nn({enabled:e.target.checked}),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`archiveAutoPurge.ageLabel`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,min:7,max:3650,disabled:!jn.enabled,value:jn.days,onChange:e=>Nn({days:Math.max(7,Math.min(3650,parseInt(e.target.value||`0`,10)||0))}),className:`w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none disabled:opacity-50`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`archiveAutoPurge.days`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`archiveAutoPurge.ageDescription`)})]}),(0,G.jsxs)(`label`,{className:`flex items-start gap-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,disabled:!jn.enabled,checked:jn.purge_stats,onChange:e=>Nn({purge_stats:e.target.checked}),className:`mt-0.5 shrink-0 disabled:opacity-50`}),(0,G.jsxs)(`span`,{className:`text-sm`,children:[(0,G.jsx)(`span`,{className:`text-white block`,children:i(`archiveAutoPurge.purgeStatsLabel`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray block mt-0.5`,children:i(`archiveAutoPurge.purgeStatsDescription`)})]})]})]})]})]})]}),(0,G.jsxs)(`div`,{className:`space-y-3 flex-1 lg:max-w-md`,children:[(0,G.jsxs)(Ld,{id:`card-camera`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Wu,{className:`w-5 h-5 text-bambu-green`}),i(`settings.camera`)]})}),(0,G.jsx)(zd,{className:`space-y-3`,children:(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white mb-2`,children:i(`settings.externalCameras`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-3`,children:i(`settings.externalCamerasDescription`)}),sn&&sn.length>0?(0,G.jsx)(`div`,{className:`space-y-3`,children:sn.map(e=>(0,G.jsxs)(`div`,{className:`p-3 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`span`,{className:`text-white font-medium text-sm`,children:e.name}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:e.external_camera_enabled,onChange:t=>jr(e.id,{enabled:t.target.checked}),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-9 h-5 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:border-gray-300 after:border after:rounded-full after:h-4 after:w-4 after:transition-all peer-checked:bg-bambu-green`})]})]}),e.external_camera_enabled&&(0,G.jsxs)(`div`,{className:`space-y-2 mt-2`,children:[(0,G.jsx)(`input`,{type:`text`,placeholder:e.external_camera_type===`usb`?i(`settings.cameraPlaceholderUsb`):i(`settings.cameraPlaceholderUrl`),value:xr[e.id]??e.external_camera_url??``,onChange:t=>kr(e.id,t.target.value),className:`w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(`select`,{value:e.external_camera_type||`mjpeg`,onChange:t=>jr(e.id,{type:t.target.value}),className:`flex-1 px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`mjpeg`,children:i(`settings.cameraTypeMjpeg`)}),(0,G.jsx)(`option`,{value:`rtsp`,children:i(`settings.cameraTypeRtsp`)}),(0,G.jsx)(`option`,{value:`snapshot`,children:i(`settings.cameraTypeSnapshot`)}),(0,G.jsx)(`option`,{value:`usb`,children:i(`settings.cameraTypeUsb`)})]}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>br(e.id,xr[e.id]??e.external_camera_url??``,e.external_camera_type||`mjpeg`),disabled:Ht[e.id]||!(xr[e.id]??e.external_camera_url),children:Ht[e.id]?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):i(`settings.test`)})]}),Bt[e.id]&&(0,G.jsx)(`div`,{className:`text-xs flex items-center gap-1 ${Bt[e.id]?.success?`text-green-500`:`text-red-500`}`,children:Bt[e.id]?.success?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(xs,{className:`w-3 h-3`}),i(`settings.connected`),Bt[e.id]?.resolution&&` (${Bt[e.id]?.resolution})`]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ds,{className:`w-3 h-3`}),Bt[e.id]?.error||i(`settings.toast.connectionFailed`)]})}),(e.external_camera_type===`mjpeg`||e.external_camera_type===`rtsp`||e.external_camera_type===`usb`)&&(0,G.jsxs)(`div`,{className:`space-y-1`,children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray`,children:i(`settings.cameraSnapshotUrl`,`Snapshot URL (optional)`)}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`input`,{type:`text`,placeholder:i(`settings.cameraSnapshotUrlPlaceholder`,`http://192.168.1.61:1984/api/frame.jpeg?src=printer`),value:Tr[e.id]??e.external_camera_snapshot_url??``,onChange:t=>Ar(e.id,t.target.value),className:`flex-1 px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>br(e.id,Tr[e.id]??e.external_camera_snapshot_url??``,`snapshot`),disabled:Ht[e.id]||!(Tr[e.id]??e.external_camera_snapshot_url),children:Ht[e.id]?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):i(`settings.test`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray opacity-75`,children:i(`settings.cameraSnapshotUrlHelp`,`Single-frame URL used for notification thumbnails, finish photos, timelapse and plate detection. Leave blank to capture from the live stream above. Useful for go2rtc (/api/frame.jpeg) and IP cameras with a dedicated snapshot endpoint.`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray`,children:i(`settings.cameraRotation`)}),(0,G.jsxs)(`select`,{value:e.camera_rotation||0,onChange:t=>jr(e.id,{rotation:parseInt(t.target.value)}),className:`px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-xs focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:0,children:`0°`}),(0,G.jsx)(`option`,{value:90,children:`90°`}),(0,G.jsx)(`option`,{value:180,children:`180°`}),(0,G.jsx)(`option`,{value:270,children:`270°`})]})]})]})]},e.id))}):(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray italic`,children:i(`settings.noPrintersConfigured`)})]})})]}),(0,G.jsxs)(Ld,{id:`card-cost`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.costTracking`)})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.currency`)}),(0,G.jsx)(`select`,{value:A.currency,onChange:e=>yr(`currency`,e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:Ff.map(e=>(0,G.jsx)(`option`,{value:e.code,children:e.label},e.code))})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.defaultFilamentCost`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`span`,{className:`absolute left-3 top-1/2 -translate-y-1/2 text-bambu-gray text-sm pointer-events-none`,children:Pf(A.currency)}),(0,G.jsx)(`input`,{type:`number`,step:`0.01`,min:`0`,value:A.default_filament_cost,onChange:e=>yr(`default_filament_cost`,parseFloat(e.target.value)||0),style:{paddingLeft:`${Math.max(2,Pf(A.currency).length*.6+1)}rem`},className:`w-full pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.electricityCost`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`span`,{className:`absolute left-3 top-1/2 -translate-y-1/2 text-bambu-gray text-sm pointer-events-none`,children:Pf(A.currency)}),(0,G.jsx)(`input`,{type:`number`,step:`0.001`,min:`0`,value:A.energy_cost_per_kwh,onChange:e=>yr(`energy_cost_per_kwh`,parseFloat(e.target.value)||0),style:{paddingLeft:`${Math.max(2,Pf(A.currency).length*.6+1)}rem`},className:`w-full pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.energyDisplayMode`)}),(0,G.jsxs)(`select`,{value:A.energy_tracking_mode||`total`,onChange:e=>yr(`energy_tracking_mode`,e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`print`,children:i(`settings.printsOnly`)}),(0,G.jsx)(`option`,{value:`total`,children:i(`settings.totalConsumption`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:A.energy_tracking_mode===`print`?i(`settings.energyModePrintDescription`):i(`settings.energyModeTotalDescription`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.billingEnabled`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.billingEnabledDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.billing_enabled??!1,onChange:e=>yr(`billing_enabled`,e.target.checked),className:`peer sr-only`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary rounded-full peer-checked:bg-bambu-green peer-checked:after:translate-x-5 after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:border after:rounded-full after:h-5 after:w-5 after:transition-all`})]})]}),A.billing_enabled&&(0,G.jsxs)(`div`,{className:`mt-4 flex items-center justify-between gap-4 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark px-4 py-3`,children:[(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.printerKillSwitch`,`Unauthorized print kill switch`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.printerKillSwitchDescription`,`Immediately stop prints that start without authorization.`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.printer_kill_switch_enabled??!1,onChange:e=>yr(`printer_kill_switch_enabled`,e.target.checked),className:`peer sr-only`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary rounded-full peer-checked:bg-bambu-green peer-checked:after:translate-x-5 after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:border after:rounded-full after:h-5 after:w-5 after:transition-all`})]})]}),A.billing_enabled&&(0,G.jsxs)(`div`,{className:`mt-4 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark p-4`,children:[(0,G.jsx)(`div`,{className:`mb-3`,children:(0,G.jsxs)(`h4`,{className:`text-base font-medium text-white flex items-center gap-2`,children:[(0,G.jsx)(as,{className:`w-4 h-4 text-bambu-green`}),i(`settings.financeBudgetReset`,`Finance Monthly Budget Reset`)]})}),(0,G.jsxs)(`div`,{className:`flex gap-4`,children:[(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.financeBudgetResetDay`,`Reset Day`)}),(0,G.jsx)(`input`,{type:`number`,min:1,max:31,value:A.finance_budget_reset_day??1,onChange:e=>yr(`finance_budget_reset_day`,Math.max(1,Math.min(31,parseInt(e.target.value,10)||1))),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.financeBudgetResetDayHelp`,`For short months, reset uses the last day of the month.`)})]}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.financeBudgetResetTimezone`,`Reset timezone`)}),(0,G.jsxs)(`select`,{value:A.finance_budget_reset_timezone??`UTC`,onChange:e=>yr(`finance_budget_reset_timezone`,e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`,children:[(0,G.jsx)(`option`,{value:`UTC`,children:`UTC`}),(0,G.jsx)(`option`,{value:`Europe/Berlin`,children:`Europe/Berlin`}),(0,G.jsx)(`option`,{value:`Europe/Vienna`,children:`Europe/Vienna`}),(0,G.jsx)(`option`,{value:`Europe/Zurich`,children:`Europe/Zurich`}),(0,G.jsx)(`option`,{value:`America/New_York`,children:`America/New_York`}),(0,G.jsx)(`option`,{value:`America/Chicago`,children:`America/Chicago`}),(0,G.jsx)(`option`,{value:`America/Denver`,children:`America/Denver`}),(0,G.jsx)(`option`,{value:`America/Los_Angeles`,children:`America/Los_Angeles`}),(0,G.jsx)(`option`,{value:`Asia/Tokyo`,children:`Asia/Tokyo`}),(0,G.jsx)(`option`,{value:`Asia/Singapore`,children:`Asia/Singapore`}),(0,G.jsx)(`option`,{value:`Australia/Sydney`,children:`Australia/Sydney`})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.financeBudgetResetTimezoneHelp`,`Budget window start is calculated in this timezone.`)})]})]})]}),A.billing_enabled&&l&&(0,G.jsxs)(`div`,{className:`mt-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>we(!0),disabled:Te,children:Te?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 mr-2 animate-spin`}),i(`settings.rebuildLedgerInProgress`,`Starting...`)]}):i(`settings.rebuildLedger`,`Rebuild wallet ledger`)}),Ce&&(0,G.jsx)(rf,{title:i(`settings.rebuildLedgerConfirmTitle`,`Rebuild wallet ledger?`),message:i(`settings.rebuildLedgerConfirmMessage`,`This will rebuild the wallet ledger to repair historical balance values. Run this only if you know what you are doing.`),confirmText:i(`common.run`,`Run`),cancelText:i(`common.cancel`,`Cancel`),isLoading:Te,loadingText:i(`common.running`,`Running`),variant:`warning`,onCancel:()=>we(!1),onConfirm:async()=>{Ee(!0);try{await Z.rebuildBalanceLedger(),o(i(`settings.rebuildLedgerStarted`,`Ledger rebuild started`),`success`),we(!1)}catch(e){o(e.message||`Failed to start ledger rebuild`,`error`)}finally{Ee(!1)}}})]})]})]})]}),(0,G.jsxs)(Ld,{id:`card-filemanager`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(dc,{className:`w-5 h-5 text-bambu-green`}),i(`settings.fileManager`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.createArchiveEntry`)}),(0,G.jsxs)(`select`,{value:A.library_archive_mode??`ask`,onChange:e=>yr(`library_archive_mode`,e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`always`,children:i(`settings.archiveMode.always`)}),(0,G.jsx)(`option`,{value:`never`,children:i(`settings.archiveMode.never`)}),(0,G.jsx)(`option`,{value:`ask`,children:i(`settings.archiveMode.ask`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.createArchiveEntryDescription`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.lowDiskSpaceWarning`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,min:`0.5`,max:`100`,step:`0.5`,value:A.library_disk_warning_gb??5,onChange:e=>yr(`library_disk_warning_gb`,parseFloat(e.target.value)||5),className:`w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`GB`})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.lowDiskSpaceDescription`)})]}),En&&Dn&&(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary pt-3 mt-3 space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`libraryAutoPurge.enableLabel`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`libraryAutoPurge.enableDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Dn.auto_purge_enabled,onChange:e=>kn({auto_purge_enabled:e.target.checked}),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`libraryAutoPurge.ageLabel`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,min:7,max:3650,disabled:!Dn.auto_purge_enabled,value:Dn.auto_purge_days,onChange:e=>kn({auto_purge_days:Math.max(7,Math.min(3650,parseInt(e.target.value||`0`,10)||0))}),className:`w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none disabled:opacity-50`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`libraryAutoPurge.days`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`libraryAutoPurge.ageDescription`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 text-sm text-white cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,disabled:!Dn.auto_purge_enabled,checked:Dn.auto_purge_include_never_printed,onChange:e=>kn({auto_purge_include_never_printed:e.target.checked}),className:`rounded border-gray-300 disabled:opacity-50`}),i(`libraryAutoPurge.includeNeverPrinted`)]})]})]})]}),(0,G.jsxs)(Ld,{id:`card-data`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.dataManagement`)})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.clearNotificationLogs`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.clearNotificationLogsDescription`)})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>et(!0),children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),i(`common.clear`)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.resetUiPreferences`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.resetUiPreferencesDescription`)})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>nt(!0),children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),i(`settings.reset`)]})]}),(0,G.jsxs)(`div`,{className:`pt-4 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.storageUsage`,`Storage Usage`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.storageUsageDescription`,`Breakdown of data usage by category`)})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:Xt,disabled:Yt||ht,children:[(0,G.jsx)(Vl,{className:`w-4 h-4 ${Yt||ht?`animate-spin`:``}`}),i(`common.refresh`,`Refresh`)]})]}),(0,G.jsx)(`div`,{className:`mt-3`,children:Jt?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),i(`common.loading`,`Loading`)]}):qt?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`w-full h-3 bg-bambu-dark rounded-full overflow-hidden flex`,children:qt.categories.filter(e=>e.bytes>0).map((e,t)=>(0,G.jsx)(`div`,{className:`${BGe(e.key,t)} h-full`,style:{width:`${e.percent_of_total}%`},title:`${e.label}: ${e.formatted}`},e.key))}),(0,G.jsx)(`div`,{className:`mt-3 flex flex-wrap gap-3`,children:qt.categories.filter(e=>e.bytes>0).map((e,t)=>(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-xs`,children:[(0,G.jsx)(`span`,{className:`w-3 h-3 rounded-full ${BGe(e.key,t)}`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:e.label}),(0,G.jsx)(`span`,{className:`text-white`,children:e.formatted}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[`(`,e.percent_of_total.toFixed(1),`%)`]})]},e.key))}),(0,G.jsxs)(`div`,{className:`mt-2 text-xs text-bambu-gray`,children:[i(`settings.storageUsageTotal`,`Total`),`: `,(0,G.jsx)(`span`,{className:`text-white`,children:qt.total_formatted}),qt.scan_errors>0&&(0,G.jsxs)(`span`,{className:`ml-2 text-amber-700 dark:text-amber-400`,children:[i(`settings.storageUsageErrors`,`Scan errors`),`: `,qt.scan_errors]})]}),qt.other_breakdown?.length>0&&(0,G.jsxs)(`div`,{className:`mt-4`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:i(`settings.storageUsageOtherBreakdown`,`Other breakdown`)}),(0,G.jsx)(`div`,{className:`space-y-2`,children:qt.other_breakdown.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-xs`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-white`,children:e.label}),(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded-full border ${e.kind===`system`?`border-slate-500 text-slate-300`:`border-bambu-green text-bambu-green`}`,children:e.kind===`system`?i(`settings.storageUsageSystem`,`System`):i(`settings.storageUsageData`,`Data`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray`,children:[(0,G.jsx)(`span`,{className:`text-white`,children:e.formatted}),(0,G.jsxs)(`span`,{children:[`(`,e.percent_of_total.toFixed(1),`%)`]})]})]},`${e.bucket}-${e.kind}`))})]})]}):(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.storageUsageUnavailable`,`Storage usage data is unavailable`)})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between pt-4 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.backupRestore`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.backupRestoreDescription`)})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>Le(`backup`),children:[(0,G.jsx)(Ws,{className:`w-4 h-4`}),i(`settings.goToBackup`)]})]})]})]})]}),(0,G.jsxs)(`div`,{className:`space-y-3 flex-1 lg:max-w-sm`,children:[(0,G.jsxs)(Ld,{id:`card-updates`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.updates`)})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-xs font-medium text-bambu-gray uppercase tracking-wider`,children:i(`settings.printerFirmware`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.checkPrinterFirmware`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.checkFirmwareDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.check_printer_firmware??!0,onChange:e=>yr(`check_printer_firmware`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsx)(`div`,{className:`border-t border-bambu-dark-tertiary pt-4`,children:(0,G.jsx)(`p`,{className:`text-xs font-medium text-bambu-gray uppercase tracking-wider mb-4`,children:i(`settings.bambuddySoftware`)})}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.checkForUpdatesLabel`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.autoCheckDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.check_updates,onChange:e=>yr(`check_updates`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between ${A.check_updates?``:`opacity-50`}`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.includeBetaUpdates`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.includeBetaUpdatesDesc`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.include_beta_updates??!1,onChange:e=>yr(`include_beta_updates`,e.target.checked),disabled:!A.check_updates,className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.currentVersion`)}),(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[`v`,Tn?.version||`...`]})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>Fn(),disabled:In,children:[In?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Vl,{className:`w-4 h-4`}),i(`settings.checkNow`)]})]}),Pn?.update_available?(0,G.jsxs)(`div`,{className:`mt-4 p-3 bg-bambu-green/10 border border-bambu-green/30 rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`p`,{className:`text-bambu-green font-medium`,children:[`Update available: v`,Pn.latest_version]}),Pn.release_name&&Pn.release_name!==Pn.latest_version&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:Pn.release_name})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[Pn.release_notes&&(0,G.jsx)(`button`,{onClick:()=>ot(!0),className:`text-bambu-gray hover:text-white transition-colors text-sm underline`,children:i(`settings.releaseNotes`)}),Pn.release_url&&(0,G.jsx)(`a`,{href:Pn.release_url,target:`_blank`,rel:`noopener noreferrer`,className:`text-bambu-gray hover:text-white transition-colors`,title:i(`settings.viewReleaseOnGitHub`),children:(0,G.jsx)(nc,{className:`w-4 h-4`})})]})]}),Ln?.status===`downloading`||Ln?.status===`installing`?(0,G.jsxs)(`div`,{className:`mt-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),(0,G.jsx)(`span`,{children:Ln.message})]}),(0,G.jsx)(`div`,{className:`mt-2 w-full bg-bambu-dark-tertiary rounded-full h-2`,children:(0,G.jsx)(`div`,{className:`bg-bambu-green h-2 rounded-full transition-all duration-300`,style:{width:`${Ln.progress}%`}})})]}):Ln?.status===`complete`?(0,G.jsx)(`div`,{className:`mt-3 p-2 bg-bambu-green/20 rounded text-sm text-bambu-green`,children:Ln.message}):Ln?.status===`error`?(0,G.jsx)(`div`,{className:`mt-3 p-2 bg-red-100 dark:bg-red-500/20 rounded text-sm text-red-700 dark:text-red-400`,children:Ln.error||Ln.message}):Pn?.is_ha_addon?(0,G.jsx)(`div`,{className:`mt-3 p-3 bg-bambu-dark-tertiary rounded-lg`,children:(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.updateViaHomeAssistant`)})}):Pn?.is_docker?(0,G.jsxs)(`div`,{className:`mt-3 p-3 bg-bambu-dark-tertiary rounded-lg`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-2`,children:i(`settings.updateViaDocker`)}),(0,G.jsxs)(`div`,{className:`flex items-start gap-1`,children:[(0,G.jsx)(`code`,{className:`flex-1 block text-xs bg-bambu-dark p-2 rounded text-bambu-green font-mono break-all select-all`,children:Lr}),(0,G.jsx)(JW,{value:Lr,titleKey:`settings.copyUpdateCommand`,copiedTitleKey:`printers.copied`,className:`ml-0 p-2 rounded hover:bg-bambu-dark text-bambu-gray hover:text-white transition-colors flex-shrink-0`,iconClassName:`w-4 h-4`})]}),(0,G.jsxs)(`label`,{className:`block mt-3`,children:[(0,G.jsx)(`span`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.composeDirectory`)}),(0,G.jsx)(`input`,{type:`text`,value:A?.docker_compose_dir??``,onChange:e=>yr(`docker_compose_dir`,e.target.value),placeholder:Pn?.compose_dir_detected||`/opt/bambuddy`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded text-sm text-white font-mono placeholder:text-bambu-gray/60 focus:outline-none focus:border-bambu-green`}),(0,G.jsx)(`span`,{className:`block text-xs text-bambu-gray mt-1`,children:i(`settings.composeDirectoryHint`)})]})]}):Pn?.update_method===`windows_installer`?(0,G.jsxs)(`div`,{className:`mt-3 p-3 bg-bambu-dark-tertiary rounded-lg`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-3`,children:i(`settings.updateViaWindowsInstaller`)}),(0,G.jsxs)(`a`,{href:Pn.installer_download_url||Pn.release_url||`https://github.com/maziggy/bambuddy/releases/tag/v${Pn.latest_version}`,target:`_blank`,rel:`noopener noreferrer`,className:`inline-flex items-center justify-center font-medium rounded-lg transition-colors focus:outline-none focus:ring-2 focus:ring-offset-2 focus:ring-offset-bambu-dark disabled:opacity-50 bg-bambu-green hover:bg-bambu-green-light text-white focus:ring-bambu-green px-4 py-2 text-sm gap-2 min-h-[44px] md:min-h-0`,children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),i(`settings.downloadWindowsInstaller`,{version:Pn.latest_version})]})]}):(0,G.jsxs)(Q,{className:`mt-3`,onClick:()=>sr.mutate(),disabled:sr.isPending,children:[sr.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Ys,{className:`w-4 h-4`}),i(`settings.installUpdate`)]})]}):Pn?.error?(0,G.jsx)(`div`,{className:`mt-2 p-2 bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 rounded text-sm text-red-700 dark:text-red-400`,children:i(`settings.failedToCheckUpdates`,{error:Pn.error})}):Pn&&!Pn.update_available?(0,G.jsx)(`p`,{className:`mt-2 text-sm text-bambu-gray`,children:i(`settings.latestVersionRunning`)}):null]})]})]}),(0,G.jsx)(GWe,{})]})]})]}),je===`network`&&A&&(0,G.jsxs)(`div`,{className:`flex flex-col lg:flex-row gap-6`,children:[(0,G.jsxs)(`div`,{className:`flex-1 lg:max-w-xl space-y-3`,children:[(0,G.jsxs)(Ld,{id:`card-externalurl`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(kc,{className:`w-5 h-5 text-blue-600 dark:text-blue-400`}),i(`settings.externalUrl`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.externalUrlDescription`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.bambuddyUrl`)}),(0,G.jsx)(`input`,{type:`text`,value:A.external_url??``,onChange:e=>yr(`external_url`,e.target.value),placeholder:`http://192.168.1.100:8000`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.externalUrlHint`)})]})]})]}),(0,G.jsxs)(Ld,{id:`card-ftpretry`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Vl,{className:`w-5 h-5 text-blue-600 dark:text-blue-400`}),i(`settings.ftpRetry`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.ftpRetryDescription`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.enableRetry`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.autoRetryDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.ftp_retry_enabled??!0,onChange:e=>yr(`ftp_retry_enabled`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),A.ftp_retry_enabled&&(0,G.jsxs)(`div`,{className:`space-y-3 pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.retryAttempts`)}),(0,G.jsxs)(`div`,{className:`relative w-44`,children:[(0,G.jsx)(`select`,{value:A.ftp_retry_count??3,onChange:e=>yr(`ftp_retry_count`,parseInt(e.target.value)),className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:[1,2,3,4,5,6,7,8,9,10].map(e=>(0,G.jsx)(`option`,{value:e,children:i(`settings.time`,{count:e})},e))}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.retryDelay`)}),(0,G.jsxs)(`div`,{className:`relative w-44`,children:[(0,G.jsx)(`select`,{value:A.ftp_retry_delay??2,onChange:e=>yr(`ftp_retry_delay`,parseInt(e.target.value)),className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:[1,2,3,5,10,15,20,30].map(e=>(0,G.jsx)(`option`,{value:e,children:i(`settings.second`,{count:e})},e))}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.connectionTimeout`)}),(0,G.jsxs)(`div`,{className:`relative w-44`,children:[(0,G.jsx)(`select`,{value:A.ftp_timeout??30,onChange:e=>yr(`ftp_timeout`,parseInt(e.target.value)),className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:[10,15,20,30,45,60,90,120,180,300].map(e=>(0,G.jsx)(`option`,{value:e,children:i(`settings.nSeconds`,{count:e})},e))}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.increaseForWeakWifi`)})]})]})]})]})]}),(0,G.jsxs)(`div`,{className:`flex-1 lg:max-w-xl space-y-3`,children:[(0,G.jsxs)(Ld,{id:`card-ha`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(zc,{className:`w-5 h-5 text-bambu-green`}),i(`settings.homeAssistant`)]}),A.ha_enabled&&It&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`w-2.5 h-2.5 rounded-full ${It.success?`bg-green-400`:`bg-red-400`}`}),(0,G.jsx)(`span`,{className:`text-sm ${It.success?`text-green-700 dark:text-green-400`:`text-red-700 dark:text-red-400`}`,children:It.success?i(`settings.connected`):i(`settings.disconnected`)})]})]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.homeAssistantFullDescription`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.enableHomeAssistant`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.homeAssistantDescription`)}),A.ha_env_managed&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1 mt-1`,children:[(0,G.jsx)(tl,{className:`w-3 h-3 text-bambu-green`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-green`,children:i(`settings.autoEnabledViaEnv`)})]})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.ha_enabled??!1,onChange:e=>yr(`ha_enabled`,e.target.checked),disabled:A.ha_env_managed,className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green ${A.ha_env_managed?`opacity-60 cursor-not-allowed`:``}`})]})]}),A.ha_enabled&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[i(`settings.homeAssistantUrl`),A.ha_url_from_env&&(0,G.jsx)(`span`,{className:`ml-2 text-xs text-bambu-green`,children:i(`settings.environmentManagedLabel`)})]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`input`,{type:`text`,value:A.ha_url??``,onChange:e=>yr(`ha_url`,e.target.value),placeholder:`http://192.168.1.100:8123`,disabled:A.ha_url_from_env,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${A.ha_url_from_env?`opacity-60 cursor-not-allowed`:``}`}),A.ha_url_from_env&&(0,G.jsx)(tl,{className:`absolute right-3 top-2.5 w-4 h-4 text-bambu-gray`})]}),A.ha_url_from_env&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.urlFromEnvReadOnly`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[i(`settings.longLivedAccessToken`),A.ha_token_from_env&&(0,G.jsx)(`span`,{className:`ml-2 text-xs text-bambu-green`,children:i(`settings.environmentManagedLabel`)})]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`input`,{type:`password`,value:A.ha_token??``,onChange:e=>yr(`ha_token`,e.target.value),placeholder:`eyJ0eXAiOiJKV1QiLC...`,disabled:A.ha_token_from_env,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${A.ha_token_from_env?`opacity-60 cursor-not-allowed`:``}`}),A.ha_token_from_env&&(0,G.jsx)(tl,{className:`absolute right-3 top-2.5 w-4 h-4 text-bambu-gray`})]}),A.ha_token_from_env?(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.tokenFromEnvReadOnly`)}):(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.haTokenHint`)})]}),A.ha_url&&A.ha_token&&(0,G.jsx)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,disabled:Rt,onClick:async()=>{zt(!0),Lt(null);try{Lt(await Z.testHAConnection(A.ha_url,A.ha_token))}catch(e){Lt({success:!1,message:null,error:e instanceof Error?e.message:i(`common.unknownError`)})}finally{zt(!1)}},children:[Rt?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Zu,{className:`w-4 h-4`}),i(`settings.testConnection`)]})})]})]})]}),(0,G.jsxs)(Ld,{id:`card-mqtt`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Zu,{className:`w-5 h-5 text-blue-600 dark:text-blue-400`}),i(`settings.mqttPublishing`)]}),zn?.enabled&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`w-2.5 h-2.5 rounded-full ${zn.connected?`bg-green-400`:`bg-red-400`}`}),(0,G.jsx)(`span`,{className:`text-sm ${zn.connected?`text-green-700 dark:text-green-400`:`text-red-700 dark:text-red-400`}`,children:zn.connected?i(`settings.connected`):i(`settings.disconnected`)})]})]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.mqttDescription`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.enableMqtt`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.mqttEnableDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.mqtt_enabled??!1,onChange:e=>yr(`mqtt_enabled`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),A.mqtt_enabled&&(0,G.jsxs)(`div`,{className:`space-y-3 pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.brokerHostname`)}),(0,G.jsx)(`input`,{type:`text`,value:A.mqtt_broker??``,onChange:e=>yr(`mqtt_broker`,e.target.value),placeholder:`mqtt.example.com or 192.168.1.100`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`flex items-end gap-4`,children:[(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.port`)}),(0,G.jsx)(`input`,{type:`number`,min:`1`,max:`65535`,value:A.mqtt_port??1883,onChange:e=>yr(`mqtt_port`,Math.min(65535,Math.max(1,parseInt(e.target.value)||1883))),className:`w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3 pb-2`,children:[(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.mqtt_use_tls??!1,onChange:e=>{let t=e.target.checked;yr(`mqtt_use_tls`,t);let n=A.mqtt_port??1883;t&&n===1883?yr(`mqtt_port`,8883):!t&&n===8883&&yr(`mqtt_port`,1883)},className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]}),(0,G.jsx)(`span`,{className:`text-white text-sm`,children:i(`settings.useTls`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.usernameOptional`)}),(0,G.jsx)(`input`,{type:`text`,value:A.mqtt_username??``,onChange:e=>yr(`mqtt_username`,e.target.value),placeholder:i(`settings.leaveEmptyForAnonymous`),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.passwordOptional`)}),(0,G.jsx)(`input`,{type:`password`,value:A.mqtt_password??``,onChange:e=>yr(`mqtt_password`,e.target.value),placeholder:i(`settings.leaveEmptyForAnonymous`),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.topicPrefix`)}),(0,G.jsx)(`input`,{type:`text`,value:A.mqtt_topic_prefix??`bambuddy`,onChange:e=>yr(`mqtt_topic_prefix`,e.target.value),placeholder:`bambuddy`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.topicPrefixHint`,{prefix:A.mqtt_topic_prefix||`bambuddy`})})]}),zn&&(0,G.jsx)(`div`,{className:`pt-3 mt-3 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full ${zn.connected?`bg-green-400`:`bg-red-400`}`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:zn.connected?(0,G.jsxs)(G.Fragment,{children:[i(`settings.mqttConnectedTo`),` `,(0,G.jsxs)(`span`,{className:`text-white`,children:[zn.broker,`:`,zn.port]})]}):i(`settings.spoolmanDisconnected`)})]})})]})]})]})]}),(0,G.jsx)(`div`,{className:`flex-1 lg:max-w-md space-y-3`,children:(0,G.jsxs)(Ld,{id:`card-prometheus`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Fu,{className:`w-5 h-5 text-orange-600 dark:text-orange-400`}),i(`settings.prometheusMetrics`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.prometheusEndpointDescription`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.enableMetricsEndpoint`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.prometheusDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.prometheus_enabled??!1,onChange:e=>yr(`prometheus_enabled`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),A.prometheus_enabled&&(0,G.jsxs)(`div`,{className:`space-y-3 pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.bearerTokenOptional`)}),(0,G.jsx)(`input`,{type:`password`,value:A.prometheus_token??``,onChange:e=>yr(`prometheus_token`,e.target.value),placeholder:i(`settings.leaveEmptyForNoAuth`),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.bearerTokenHint`)})]}),(0,G.jsxs)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white mb-2`,children:i(`settings.availableMetrics`)}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray space-y-1`,children:[(0,G.jsxs)(`p`,{children:[(0,G.jsx)(`code`,{className:`text-orange-700 dark:text-orange-400`,children:`bambuddy_printer_connected`}),` - `,i(`settings.metricsConnectionStatus`)]}),(0,G.jsxs)(`p`,{children:[(0,G.jsx)(`code`,{className:`text-orange-700 dark:text-orange-400`,children:`bambuddy_printer_state`}),` - `,i(`settings.metricsPrinterState`)]}),(0,G.jsxs)(`p`,{children:[(0,G.jsx)(`code`,{className:`text-orange-700 dark:text-orange-400`,children:`bambuddy_print_progress`}),` - `,i(`settings.metricsPrintProgress`)]}),(0,G.jsxs)(`p`,{children:[(0,G.jsx)(`code`,{className:`text-orange-700 dark:text-orange-400`,children:`bambuddy_bed_temp_celsius`}),` - `,i(`settings.metricsBedTemp`)]}),(0,G.jsxs)(`p`,{children:[(0,G.jsx)(`code`,{className:`text-orange-700 dark:text-orange-400`,children:`bambuddy_nozzle_temp_celsius`}),` - `,i(`settings.metricsNozzleTemp`)]}),(0,G.jsxs)(`p`,{children:[(0,G.jsx)(`code`,{className:`text-orange-700 dark:text-orange-400`,children:`bambuddy_prints_total`}),` - `,i(`settings.metricsPrintsTotal`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray/70 italic`,children:i(`settings.metricsMore`)})]})]})]})]})]})})]}),It&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg p-6 max-w-md w-full mx-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mb-4`,children:[It.success?(0,G.jsx)(xs,{className:`w-8 h-8 text-green-600 dark:text-green-400`}):(0,G.jsx)(Ds,{className:`w-8 h-8 text-red-600 dark:text-red-400`}),(0,G.jsx)(`h3`,{className:`text-lg font-medium text-white`,children:It.success?i(`settings.connectionSuccessful`):i(`settings.connectionFailed`)})]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mb-6`,children:It.success?It.message||i(`settings.haConnectionSuccess`):It.error||i(`settings.haConnectionFailed`)}),(0,G.jsx)(`div`,{className:`flex justify-end`,children:(0,G.jsx)(Q,{variant:`primary`,onClick:()=>Lt(null),children:i(`settings.ok`)})})]})}),je===`plugs`&&(0,G.jsxs)(`div`,{id:`card-plugs`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between mb-6`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Nl,{className:`w-5 h-5 text-bambu-green`}),i(`settings.smartPlugs`)]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:i(`settings.smartPlugsDescription`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 pt-1 shrink-0`,children:[Zt&&Zt.filter(e=>e.enabled).length>1&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,className:`whitespace-nowrap`,onClick:()=>it(`on`),disabled:dr.isPending,title:i(`settings.turnAllPlugsOn`),children:[dr.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Il,{className:`w-4 h-4 text-bambu-green`}),i(`settings.allOn`)]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,className:`whitespace-nowrap`,onClick:()=>it(`off`),disabled:dr.isPending,title:i(`settings.turnAllPlugsOff`),children:[dr.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Fl,{className:`w-4 h-4 text-red-600 dark:text-red-400`}),i(`settings.allOff`)]})]}),(0,G.jsxs)(Q,{className:`whitespace-nowrap`,onClick:()=>{L(null),F(!0)},children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`settings.addSmartPlug`)]})]})]}),Zt&&Zt.length>0&&(0,G.jsxs)(Ld,{className:`mb-6`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(rd,{className:`w-4 h-4 text-yellow-600 dark:text-yellow-400`}),i(`settings.energySummary`),en&&(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin text-bambu-gray ml-2`})]})}),(0,G.jsx)(zd,{children:$t?(0,G.jsxs)(`div`,{className:`grid grid-cols-2 md:grid-cols-4 gap-4`,children:[(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray text-xs mb-1`,children:[(0,G.jsx)(rd,{className:`w-3 h-3`}),i(`settings.currentPower`)]}),(0,G.jsxs)(`div`,{className:`text-xl font-bold text-white`,children:[$t.totalPower.toFixed(1),(0,G.jsx)(`span`,{className:`text-sm font-normal text-bambu-gray ml-1`,children:`W`})]}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.plugsOnline`,{reachable:$t.reachableCount,total:$t.totalPlugs})})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray text-xs mb-1`,children:[(0,G.jsx)(as,{className:`w-3 h-3`}),i(`settings.today`)]}),(0,G.jsxs)(`div`,{className:`text-xl font-bold text-white`,children:[$t.totalToday.toFixed(3),(0,G.jsx)(`span`,{className:`text-sm font-normal text-bambu-gray ml-1`,children:`kWh`})]}),(A?.energy_cost_per_kwh??0)>0&&(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray mt-1`,children:[`~`,($t.totalToday*(A?.energy_cost_per_kwh??0)).toFixed(2),` `,Pf(A?.currency||`USD`)]})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray text-xs mb-1`,children:[(0,G.jsx)(Fu,{className:`w-3 h-3`}),i(`settings.yesterday`)]}),(0,G.jsxs)(`div`,{className:`text-xl font-bold text-white`,children:[$t.totalYesterday.toFixed(3),(0,G.jsx)(`span`,{className:`text-sm font-normal text-bambu-gray ml-1`,children:`kWh`})]}),(A?.energy_cost_per_kwh??0)>0&&(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray mt-1`,children:[`~`,($t.totalYesterday*(A?.energy_cost_per_kwh??0)).toFixed(2),` `,Pf(A?.currency||`USD`)]})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-bambu-gray text-xs mb-1`,children:[(0,G.jsx)(Ks,{className:`w-3 h-3`}),i(`settings.total`)]}),(0,G.jsxs)(`div`,{className:`text-xl font-bold text-white`,children:[$t.totalLifetime.toFixed(1),(0,G.jsx)(`span`,{className:`text-sm font-normal text-bambu-gray ml-1`,children:`kWh`})]}),(A?.energy_cost_per_kwh??0)>0&&(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray mt-1`,children:[`~`,($t.totalLifetime*(A?.energy_cost_per_kwh??0)).toFixed(2),` `,Pf(A?.currency||`USD`)]})]})]}):en?null:(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.enablePlugsForSummary`)})})]}),Qt?(0,G.jsx)(`div`,{className:`flex justify-center py-12`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):Zt&&Zt.length>0?(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 lg:grid-cols-3 xl:grid-cols-4 gap-4`,children:Zt.map(e=>(0,G.jsx)(YUe,{plug:e,onEdit:e=>{L(e),F(!0)}},e.id))}):(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-12`,children:(0,G.jsxs)(`div`,{className:`text-center text-bambu-gray`,children:[(0,G.jsx)(Nl,{className:`w-16 h-16 mx-auto mb-4 opacity-30`}),(0,G.jsx)(`p`,{className:`text-lg font-medium text-white mb-2`,children:i(`settings.noSmartPlugsTitle`)}),(0,G.jsx)(`p`,{className:`text-sm mb-4`,children:i(`settings.noSmartPlugsDescription`)}),(0,G.jsxs)(Q,{onClick:()=>{L(null),F(!0)},children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`settings.addFirstSmartPlug`)]})]})})})]}),je===`sensors`&&(0,G.jsxs)(`div`,{id:`card-sensors`,children:[(0,G.jsxs)(`div`,{id:`card-ha-sensors`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-4`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(wc,{className:`w-5 h-5 text-bambu-green`}),i(`haSensors.sectionTitle`)]}),(0,G.jsxs)(Q,{className:`whitespace-nowrap`,disabled:!sn?.length,onClick:()=>{V(null),z(!0)},children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`haSensors.add`)]})]}),cn&&cn.length>0?(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 lg:grid-cols-3 gap-4`,children:cn.map(e=>{let t=sn?.find(t=>t.id===e.printer_id);return(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`py-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-2`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-white font-medium truncate`,children:e.name}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray truncate`,children:e.entity_id}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mt-1`,children:t?.name??i(`haSensors.unknownPrinter`)})]}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>{V(e),z(!0)},children:i(`common.edit`)})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-1 mt-3`,children:[e.block_print&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 text-xs rounded bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400`,children:i(`haSensors.badgeBlocks`)}),e.notify_on_alert&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 text-xs rounded bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`,children:i(`haSensors.badgeNotifies`)}),!e.show_on_printer_card&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 text-xs rounded bg-bambu-dark-tertiary text-bambu-gray`,children:i(`haSensors.badgeHidden`)})]})]})},e.id)})}):(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-8`,children:(0,G.jsxs)(`div`,{className:`text-center text-bambu-gray`,children:[(0,G.jsx)(wc,{className:`w-12 h-12 mx-auto mb-3 opacity-30`}),(0,G.jsx)(`p`,{className:`text-sm`,children:i(`haSensors.empty`)})]})})})]}),(0,G.jsxs)(`div`,{id:`card-location-sensors`,className:`mt-8`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-[20px] mb-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(wc,{className:`w-5 h-5 text-bambu-green`}),i(`locationHaSensors.sectionTitle`)]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:i(`locationHaSensors.sectionDescription`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 pt-1 shrink-0`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>ae(!0),className:`p-2 rounded-lg bg-bambu-dark-tertiary hover:bg-bambu-gray-dark text-white transition-colors`,title:i(`locationHaSensors.options.buttonLabel`),"aria-label":i(`locationHaSensors.options.buttonLabel`),children:(0,G.jsx)(Rs,{className:`w-4 h-4`})}),(0,G.jsxs)(Q,{className:`whitespace-nowrap`,disabled:!un?.length,onClick:()=>{re(null),te(!0)},children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`locationHaSensors.add`)]})]})]}),ln&&ln.length>0?(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 lg:grid-cols-3 gap-4`,children:(()=>{let e=new Map((un??[]).map((e,t)=>[e.id,t])),t=ln.reduce((e,t)=>{let n=e.get(t.location_id)??[];return n.push(t),e.set(t.location_id,n),e},new Map);return Array.from(t.entries()).sort(([t],[n])=>(e.get(t)??2**53-1)-(e.get(n)??2**53-1))})().map(([e,t])=>{let n=un?.find(t=>t.id===e),r=e=>VT({device_class:e.device_class,state:e.last_state,kind:e.kind}),a=[...t].sort((e,t)=>(VGe[e.device_class??``]??99)-(VGe[t.device_class??``]??99));return(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`py-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-2`,children:[(0,G.jsx)(`div`,{className:`text-white font-medium truncate`,children:n?.name??i(`locationHaSensors.unknownLocation`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>ue({locationName:n?.name??i(`locationHaSensors.unknownLocation`),sensorIds:a.map(e=>e.id)}),className:`p-1 text-bambu-gray hover:text-red-500 rounded transition-colors shrink-0`,title:i(`common.delete`),"aria-label":i(`common.delete`),children:(0,G.jsx)(Nu,{className:`w-3.5 h-3.5`})})]}),(0,G.jsx)(`div`,{className:`mt-2 space-y-1.5`,children:a.map(e=>{let t=r(e),n=fn.get(e.id),a=HGe(n,i),o=DUe(oe&&n?EUe(n):null,se,H,ce)||`text-white`;return(0,G.jsxs)(`div`,{className:`flex items-center min-w-0 text-xs text-bambu-gray`,children:[(0,G.jsx)(t,{className:`w-3.5 h-3.5 shrink-0 mr-1.5`}),a&&(0,G.jsx)(`span`,{className:`${o} shrink-0 w-[52px] text-center`,children:a}),a&&(0,G.jsx)(`span`,{className:`shrink-0 mr-1.5`,children:`-`}),(0,G.jsx)(`span`,{className:`truncate mr-1.5`,title:e.name,children:e.entity_id}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>{re(e),te(!0)},className:`p-1 text-bambu-gray hover:text-white rounded transition-colors shrink-0`,title:i(`common.edit`),"aria-label":i(`common.edit`),children:(0,G.jsx)(kl,{className:`w-3.5 h-3.5`})})]},e.id)})}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-1 mt-3`,children:[(()=>{let e=a.filter(e=>e.notify_on_alert);return e.length?(0,G.jsxs)(`span`,{className:`flex items-center gap-1 px-2 py-0.5 text-xs rounded bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`,children:[i(`haSensors.badgeNotifies`),e.map(e=>(0,G.jsx)(r(e),{className:`w-3 h-3`},e.id))]}):null})(),(()=>{let e=a.filter(e=>!e.show_on_card);return e.length?(0,G.jsxs)(`span`,{className:`flex items-center gap-1 px-2 py-0.5 text-xs rounded bg-bambu-dark-tertiary text-bambu-gray`,children:[i(`haSensors.badgeHidden`),e.map(e=>(0,G.jsx)(r(e),{className:`w-3 h-3`},e.id))]}):null})()]})]})},e)})}):(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-8`,children:(0,G.jsxs)(`div`,{className:`text-center text-bambu-gray`,children:[(0,G.jsx)(wc,{className:`w-12 h-12 mx-auto mb-3 opacity-30`}),(0,G.jsx)(`p`,{className:`text-sm`,children:i(`locationHaSensors.empty`)})]})})})]})]}),je===`notifications`&&(0,G.jsxs)(`div`,{className:`grid grid-cols-1 lg:grid-cols-2 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-4`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,id:`card-providers`,children:[(0,G.jsx)(qo,{className:`w-5 h-5 text-bambu-green`}),i(`settings.providers`)]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>Se(!0),children:[(0,G.jsx)(Rc,{className:`w-4 h-4`}),i(`settings.log`)]}),tn&&tn.length>0&&(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>{lr(null),ur.mutate()},disabled:ur.isPending,children:[ur.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Ql,{className:`w-4 h-4`}),i(`settings.testAll`)]}),(0,G.jsxs)(Q,{size:`sm`,onClick:()=>{me(null),fe(!0)},children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`settings.addNotificationProvider`)]})]})]}),(0,G.jsx)(Ld,{className:`mb-4`,children:(0,G.jsx)(zd,{className:`py-3`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white text-sm font-medium`,children:i(`settings.notificationLanguage`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.notificationLanguageDescription`)})]}),(0,G.jsx)(`select`,{value:A.notification_language||`en`,onChange:e=>yr(`notification_language`,e.target.value),className:`px-2 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm focus:outline-none focus:ring-1 focus:ring-bambu-green`,children:kt.map(e=>(0,G.jsx)(`option`,{value:e.code,children:e.nativeName},e.code))})]})})}),(0,G.jsx)(Ld,{className:`mb-4`,children:(0,G.jsx)(zd,{className:`py-3`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white text-sm font-medium`,children:i(`settings.bedCooledThreshold`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.bedCooledThresholdDescription`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`input`,{type:`number`,min:20,max:80,step:1,value:A.bed_cooled_threshold??35,onChange:e=>yr(`bed_cooled_threshold`,Number(e.target.value)),className:`w-16 px-2 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm text-center focus:outline-none focus:ring-1 focus:ring-bambu-green`}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:`°C`})]})]})})}),(0,G.jsx)(Ld,{className:`mb-4`,children:(0,G.jsx)(zd,{className:`py-3`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between ${Hn?.advanced_auth_enabled?``:`opacity-50`}`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white text-sm font-medium`,children:i(`settings.userNotificationsEnabled`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:Hn?.advanced_auth_enabled?i(`settings.userNotificationsEnabledDescription`):i(`settings.userNotificationsDisabledHint`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,className:`sr-only peer`,checked:A.user_notifications_enabled??!0,disabled:!Hn?.advanced_auth_enabled,onChange:e=>yr(`user_notifications_enabled`,e.target.checked)}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green peer-disabled:cursor-not-allowed`})]})]})})}),cr&&(0,G.jsx)(Ld,{className:`mb-4`,children:(0,G.jsxs)(zd,{className:`py-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`span`,{className:`text-sm font-medium text-white`,children:i(`settings.testResults`)}),(0,G.jsx)(`button`,{onClick:()=>lr(null),className:`text-bambu-gray hover:text-white text-xs`,children:i(`common.dismiss`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-4 text-sm mb-2`,children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-bambu-green`,children:[(0,G.jsx)(xs,{className:`w-4 h-4`}),i(`settings.testPassedCount`,{count:cr.success})]}),cr.failed>0&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-red-700 dark:text-red-400`,children:[(0,G.jsx)(Ds,{className:`w-4 h-4`}),i(`settings.testFailedCount`,{count:cr.failed})]})]}),cr.results.filter(e=>!e.success).length>0&&(0,G.jsx)(`div`,{className:`space-y-1 mt-2 pt-2 border-t border-bambu-dark-tertiary`,children:cr.results.filter(e=>!e.success).map(e=>(0,G.jsxs)(`div`,{className:`text-xs text-red-700 dark:text-red-400`,children:[(0,G.jsxs)(`span`,{className:`font-medium`,children:[e.provider_name,`:`]}),` `,e.message]},e.provider_id))})]})}),W?(0,G.jsx)(`div`,{className:`flex justify-center py-12`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})}):tn&&tn.length>0?(0,G.jsx)(`div`,{className:`space-y-3`,children:tn.map(e=>(0,G.jsx)(oWe,{provider:e,onEdit:e=>{me(e),fe(!0)}},e.id))}):(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-8`,children:(0,G.jsxs)(`div`,{className:`text-center text-bambu-gray`,children:[(0,G.jsx)(qo,{className:`w-12 h-12 mx-auto mb-3 opacity-30`}),(0,G.jsx)(`p`,{className:`text-sm font-medium text-white mb-2`,children:i(`settings.noProvidersTitle`)}),(0,G.jsx)(`p`,{className:`text-xs mb-3`,children:i(`settings.noProvidersDescription`)}),(0,G.jsxs)(Q,{size:`sm`,onClick:()=>{me(null),fe(!0)},children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`settings.addProvider`)]})]})})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2 mb-2`,id:`card-templates`,children:[(0,G.jsx)(dc,{className:`w-5 h-5 text-bambu-green`}),i(`settings.messageTemplates`)]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-3`,children:i(`settings.messageTemplatesDescription`)}),(0,G.jsxs)(`div`,{className:`relative mb-3`,children:[(0,G.jsx)(Zl,{className:`w-4 h-4 text-bambu-gray absolute left-3 top-1/2 -translate-y-1/2 pointer-events-none`}),(0,G.jsx)(`input`,{type:`text`,value:_e,onChange:e=>ve(e.target.value),placeholder:i(`settings.filterTemplates`,`Filter templates…`),className:`w-full pl-9 pr-8 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`}),_e&&(0,G.jsx)(`button`,{onClick:()=>ve(``),className:`absolute right-2 top-1/2 -translate-y-1/2 p-1 text-bambu-gray hover:text-white`,"aria-label":`Clear filter`,children:(0,G.jsx)(td,{className:`w-3.5 h-3.5`})})]}),gn?(0,G.jsx)(`div`,{className:`flex justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})}):hn&&hn.length>0?(()=>{let e=_e.trim().toLowerCase(),t=[...hn].sort((e,t)=>e.name.localeCompare(t.name)).filter(t=>!e||t.name.toLowerCase().includes(e)||(t.title_template||``).toLowerCase().includes(e));return t.length===0?(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic text-center py-6`,children:i(`settings.noTemplatesMatch`,`No templates match your filter.`)}):(0,G.jsx)(`div`,{className:`space-y-2`,children:t.map(e=>(0,G.jsx)(Ld,{className:`cursor-pointer hover:border-bambu-green/50 transition-colors`,onClick:()=>ge(e),children:(0,G.jsx)(zd,{className:`py-2.5 px-3`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium text-sm truncate`,children:e.name}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-xs truncate mt-0.5`,children:e.title_template})]}),(0,G.jsx)(`button`,{className:`p-1.5 hover:bg-bambu-dark-tertiary rounded transition-colors shrink-0 ml-2`,onClick:t=>{t.stopPropagation(),ge(e)},children:(0,G.jsx)(Ol,{className:`w-4 h-4 text-bambu-gray`})})]})})},e.id))})})():(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-8`,children:(0,G.jsxs)(`div`,{className:`text-center text-bambu-gray`,children:[(0,G.jsx)(dc,{className:`w-12 h-12 mx-auto mb-3 opacity-30`}),(0,G.jsx)(`p`,{className:`text-sm`,children:i(`settings.noTemplatesAvailable`)})]})})})]})]}),je===`apikeys`&&(0,G.jsxs)(`div`,{className:d(`api_keys:read`)?`grid grid-cols-1 xl:grid-cols-2 gap-4`:`grid grid-cols-1 gap-4`,children:[(0,G.jsxs)(`div`,{children:[d(`api_keys:read`)&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-4 mb-6`,children:[(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,id:`card-createapi`,children:[(0,G.jsx)(Gc,{className:`w-5 h-5 text-bambu-green`}),i(`settings.apiKeys`)]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:i(`settings.apiKeysDescription`)})]}),(0,G.jsxs)(Q,{size:`sm`,onClick:()=>Be(!0),className:`flex-shrink-0`,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`settings.createKey`)]})]}),Ge&&(0,G.jsx)(Ld,{className:`mb-6 border-bambu-green`,children:(0,G.jsx)(zd,{className:`py-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(xs,{className:`w-5 h-5 text-bambu-green flex-shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium mb-1`,children:i(`settings.apiKeyCreated`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-2`,children:i(`settings.apiKeyCopyWarning`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 bg-bambu-dark rounded-lg p-2`,children:[(0,G.jsx)(`code`,{className:`flex-1 text-sm text-bambu-green font-mono break-all`,children:Ge}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:async()=>{try{if(navigator.clipboard&&navigator.clipboard.writeText)await navigator.clipboard.writeText(Ge);else{let e=document.createElement(`textarea`);e.value=Ge,e.style.position=`fixed`,e.style.left=`-999999px`,document.body.appendChild(e),e.select(),document.execCommand(`copy`),document.body.removeChild(e)}o(i(`settings.toast.keyCopied`))}catch{o(i(`settings.toast.copyFailed`),`error`)}},children:(0,G.jsx)(Vs,{className:`w-4 h-4`})})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 mt-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>{Qe(Ge),o(i(`settings.toast.keyAddedToBrowser`))},children:i(`settings.useInApiBrowser`)}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>Je(!0),children:[(0,G.jsx)(Rl,{className:`w-4 h-4`}),i(`settings.apiKeyQrButton`)]}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>{Je(!1),Ke(null)},children:i(`common.dismiss`)})]})]})]})})}),qe&&Ge&&(0,G.jsx)(IWe,{apiKey:Ge,baseUrl:A?.external_url||void 0,onClose:()=>Je(!1)}),ze&&(0,G.jsxs)(Ld,{className:`mb-6`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h3`,{className:`text-base font-semibold text-white`,children:i(`settings.createNewApiKey`)})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.keyName`)}),(0,G.jsx)(`input`,{type:`text`,value:Ve,onChange:e=>He(e.target.value),placeholder:i(`settings.keyNamePlaceholder`),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-2`,children:i(`common.permissions`)}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ue.can_read_status,onChange:e=>We(t=>({...t,can_read_status:e.target.checked})),className:`w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white`,children:i(`settings.readStatus`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.readStatusDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ue.can_queue,onChange:e=>We(t=>({...t,can_queue:e.target.checked})),className:`w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white`,children:i(`settings.manageQueue`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.manageQueueDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ue.can_control_printer,onChange:e=>We(t=>({...t,can_control_printer:e.target.checked})),className:`w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white`,children:i(`settings.controlPrinter`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.controlPrinterDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ue.can_manage_library,onChange:e=>We(t=>({...t,can_manage_library:e.target.checked})),className:`w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white`,children:i(`settings.manageLibrary`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.manageLibraryDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ue.can_manage_inventory,onChange:e=>We(t=>({...t,can_manage_inventory:e.target.checked})),className:`w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white`,children:i(`settings.manageInventory`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.manageInventoryDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ue.can_manage_maintenance,onChange:e=>We(t=>({...t,can_manage_maintenance:e.target.checked})),className:`w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white`,children:i(`settings.manageMaintenance`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.manageMaintenanceDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ue.can_manage_archives,onChange:e=>We(t=>({...t,can_manage_archives:e.target.checked})),className:`w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white`,children:i(`settings.manageArchives`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.manageArchivesDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ue.can_manage_projects,onChange:e=>We(t=>({...t,can_manage_projects:e.target.checked})),className:`w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white`,children:i(`settings.manageProjects`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.manageProjectsDescription`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ue.can_access_cloud,onChange:e=>We(t=>({...t,can_access_cloud:e.target.checked})),className:`w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white`,children:i(`settings.cloudAccess`,`Allow cloud access`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.cloudAccessDescription`,`Read Bambu Cloud presets and filaments on your behalf. Requires you to be signed into Bambu Cloud.`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Ue.can_update_energy_cost,onChange:e=>We(t=>({...t,can_update_energy_cost:e.target.checked})),className:`w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`span`,{className:`text-white`,children:i(`settings.updateEnergyCost`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.updateEnergyCostDescription`)})]})]})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 pt-2`,children:[(0,G.jsxs)(Q,{onClick:()=>an.mutate({name:Ve||i(`settings.unnamedKey`),...Ue}),disabled:an.isPending,children:[an.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`settings.createKey`)]}),(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>Be(!1),children:i(`common.cancel`)})]})]})]}),rn?(0,G.jsx)(`div`,{className:`flex justify-center py-12`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):nn&&nn.length>0?(0,G.jsx)(`div`,{className:`space-y-3`,children:nn.map(e=>(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-3`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(Gc,{className:`w-5 h-5 ${e.enabled?`text-bambu-green`:`text-bambu-gray`}`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e.name}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[e.key_prefix,`••••••••`,e.last_used&&` · ${i(`settings.lastUsed`)}: ${np(e.last_used)}`]})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex gap-1 text-xs flex-wrap justify-end`,children:[e.can_read_status&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400 rounded`,children:i(`settings.read`)}),e.can_queue&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-400 rounded`,children:i(`queue.title`)}),e.can_control_printer&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-orange-100 dark:bg-orange-500/20 text-orange-700 dark:text-orange-400 rounded`,children:i(`settings.control`)}),e.can_manage_library&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-cyan-100 dark:bg-cyan-500/20 text-cyan-700 dark:text-cyan-400 rounded`,children:i(`settings.libraryBadge`)}),e.can_manage_inventory&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-pink-100 dark:bg-pink-500/20 text-pink-700 dark:text-pink-400 rounded`,children:i(`settings.inventoryBadge`)}),e.can_manage_maintenance&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-teal-100 dark:bg-teal-500/20 text-teal-700 dark:text-teal-400 rounded`,children:i(`settings.maintenanceBadge`)}),e.can_manage_archives&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-indigo-100 dark:bg-indigo-500/20 text-indigo-700 dark:text-indigo-400 rounded`,children:i(`settings.archivesBadge`)}),e.can_manage_projects&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-lime-100 dark:bg-lime-500/20 text-lime-700 dark:text-lime-400 rounded`,children:i(`settings.projectsBadge`)}),e.can_access_cloud&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-400 rounded`,children:i(`settings.cloudBadge`,`Cloud`)}),e.can_update_energy_cost&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400 rounded`,children:i(`settings.energyCostBadge`)}),e.user_id===null&&(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400 rounded`,title:i(`settings.legacyKeyTooltip`,`Created before per-user ownership; recreate to use cloud access`),children:i(`settings.legacyKey`,`Legacy`)})]}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>Xe(e.id),children:(0,G.jsx)(Nu,{className:`w-4 h-4 text-red-600 dark:text-red-400`})})]})]})})},e.id))}):(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-12`,children:(0,G.jsxs)(`div`,{className:`text-center text-bambu-gray`,children:[(0,G.jsx)(Gc,{className:`w-16 h-16 mx-auto mb-4 opacity-30`}),(0,G.jsx)(`p`,{className:`text-lg font-medium text-white mb-2`,children:i(`settings.apiKeysEmptyTitle`)}),(0,G.jsx)(`p`,{className:`text-sm mb-4`,children:i(`settings.apiKeysEmptyDescription`)}),(0,G.jsxs)(Q,{onClick:()=>Be(!0),children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`settings.createFirstKey`)]})]})})}),(0,G.jsxs)(Ld,{className:`mt-6`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h3`,{className:`text-base font-semibold text-white`,id:`card-webhooks`,children:i(`settings.webhookEndpoints`)})}),(0,G.jsxs)(zd,{className:`space-y-3 text-sm`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:i(`settings.webhookApiKeyHint`)}),(0,G.jsxs)(`div`,{className:`space-y-2 font-mono text-xs`,children:[(0,G.jsxs)(`div`,{className:`p-2 bg-bambu-dark rounded`,children:[(0,G.jsx)(`span`,{className:`text-blue-700 dark:text-blue-400`,children:`GET`}),` `,(0,G.jsx)(`span`,{className:`text-white`,children:`/api/v1/webhook/status`}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[` - `,i(`settings.webhook.getAllStatus`)]})]}),(0,G.jsxs)(`div`,{className:`p-2 bg-bambu-dark rounded`,children:[(0,G.jsx)(`span`,{className:`text-blue-700 dark:text-blue-400`,children:`GET`}),` `,(0,G.jsx)(`span`,{className:`text-white`,children:`/api/v1/webhook/status/:id`}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[` - `,i(`settings.webhook.getSpecificStatus`)]})]}),(0,G.jsxs)(`div`,{className:`p-2 bg-bambu-dark rounded`,children:[(0,G.jsx)(`span`,{className:`text-green-700 dark:text-green-400`,children:`POST`}),` `,(0,G.jsx)(`span`,{className:`text-white`,children:`/api/v1/webhook/queue`}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[` - `,i(`settings.webhook.addToQueue`)]})]}),(0,G.jsxs)(`div`,{className:`p-2 bg-bambu-dark rounded`,children:[(0,G.jsx)(`span`,{className:`text-orange-700 dark:text-orange-400`,children:`POST`}),` `,(0,G.jsx)(`span`,{className:`text-white`,children:`/api/v1/webhook/printer/:id/pause`}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[` - `,i(`settings.webhook.pausePrint`)]})]}),(0,G.jsxs)(`div`,{className:`p-2 bg-bambu-dark rounded`,children:[(0,G.jsx)(`span`,{className:`text-orange-700 dark:text-orange-400`,children:`POST`}),` `,(0,G.jsx)(`span`,{className:`text-white`,children:`/api/v1/webhook/printer/:id/resume`}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[` - `,i(`settings.webhook.resumePrint`)]})]}),(0,G.jsxs)(`div`,{className:`p-2 bg-bambu-dark rounded`,children:[(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:`POST`}),` `,(0,G.jsx)(`span`,{className:`text-white`,children:`/api/v1/webhook/printer/:id/stop`}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[` - `,i(`settings.webhook.stopPrint`)]})]})]})]})]})]}),(0,G.jsxs)(Ld,{className:`mt-6`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,id:`card-camera-tokens`,children:[(0,G.jsx)(Wu,{className:`w-4 h-4 text-bambu-green`}),i(`cameraTokens.title`,`Camera API Tokens`)]})}),(0,G.jsx)(zd,{children:(0,G.jsx)(WUe,{})})]}),(0,G.jsxs)(Ld,{className:`mt-6`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,id:`card-stream-overlay`,children:[(0,G.jsx)(ml,{className:`w-4 h-4 text-bambu-green`}),i(`streamOverlay.builder.title`,`Streaming Overlay`)]})}),(0,G.jsx)(zd,{children:(0,G.jsx)(JUe,{})})]})]}),d(`api_keys:read`)&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`mb-6`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,id:`card-apibrowser`,children:[(0,G.jsx)(kc,{className:`w-5 h-5 text-bambu-green`}),i(`settings.apiBrowser`)]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:i(`settings.apiBrowserDescription`)})]}),(0,G.jsx)(Ld,{className:`mb-4`,children:(0,G.jsxs)(zd,{className:`py-3`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-2`,children:i(`settings.apiKeyForTesting`)}),(0,G.jsx)(`input`,{type:`text`,value:Ze,onChange:e=>Qe(e.target.value),placeholder:i(`settings.apiKeyPlaceholder`),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white font-mono text-sm focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-2`,children:i(`settings.apiKeyHint`)})]})}),(0,G.jsx)(NGe,{apiKey:Ze})]})]}),je===`virtual-printer`&&(0,G.jsx)(`div`,{id:`card-vp`,children:(0,G.jsx)($We,{})}),je===`spoolbuddy`&&(0,G.jsx)(`div`,{id:`card-spoolbuddy`,children:(0,G.jsx)(rGe,{})}),je===`queue`&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex gap-1 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`button`,{onClick:()=>Re(`dispatch`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px flex items-center gap-2 ${Fe===`dispatch`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Zc,{className:`w-4 h-4`}),i(`settings.tabs.queueDispatch`,`Queue & Dispatch`)]}),(0,G.jsxs)(`button`,{onClick:()=>Re(`pipelines`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px flex items-center gap-2 ${Fe===`pipelines`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)($u,{className:`w-4 h-4`}),i(`settings.tabs.queuePipelines`,`Pipelines`)]})]}),Fe===`pipelines`&&(0,G.jsx)(NUe,{}),Fe===`dispatch`&&A&&(0,G.jsxs)(`div`,{className:`flex flex-col lg:flex-row gap-4 lg:gap-6`,children:[(0,G.jsxs)(`div`,{className:`lg:w-1/2 space-y-3`,children:[(0,G.jsxs)(Ld,{id:`card-print-options`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Zc,{className:`w-4 h-4 text-bambu-green`}),i(`settings.defaultPrintOptions`,`Default Print Options`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.defaultPrintOptionsDescription`,`Set default values for print options when starting new prints. These can be overridden per print in the print dialog.`)}),[{key:`default_bed_levelling`,label:i(`settings.defaultBedLevelling`,`Bed Levelling`),desc:i(`settings.defaultBedLevellingDesc`,`Auto-level bed before print`),fallback:!0,dualNozzleOnly:!1,tristate:!0},{key:`default_flow_cali`,label:i(`settings.defaultFlowCali`,`Flow Calibration`),desc:i(`settings.defaultFlowCaliDesc`,`Calibrate extrusion flow`),fallback:!1,dualNozzleOnly:!1,tristate:!0},{key:`default_vibration_cali`,label:i(`settings.defaultVibrationCali`,`Vibration Calibration`),desc:i(`settings.defaultVibrationCaliDesc`,`Reduce ringing artifacts`),fallback:!0,dualNozzleOnly:!1,tristate:!1},{key:`default_layer_inspect`,label:i(`settings.defaultLayerInspect`,`First Layer Inspection`),desc:i(`settings.defaultLayerInspectDesc`,`AI inspection of first layer`),fallback:!1,dualNozzleOnly:!1,tristate:!1},{key:`default_timelapse`,label:i(`settings.defaultTimelapse`,`Timelapse`),desc:i(`settings.defaultTimelapseDesc`,`Record timelapse video`),fallback:!1,dualNozzleOnly:!1,tristate:!1},{key:`default_nozzle_offset_cali`,label:i(`settings.defaultNozzleOffsetCali`,`Nozzle Offset Calibration`),desc:i(`settings.defaultNozzleOffsetCaliDesc`,`Calibrate nozzle offsets between extruders`),fallback:!0,dualNozzleOnly:!0,tristate:!0}].filter(({dualNozzleOnly:e})=>!e||(sn||[]).some(e=>e.nozzle_count===2)).map(({key:e,label:t,desc:n,fallback:r,tristate:a})=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex-1 mr-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:t}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:n})]}),a?(0,G.jsx)(`div`,{className:`flex gap-1 shrink-0`,children:BW.map(t=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>yr(e,t),className:`px-2.5 py-1 text-xs rounded transition-colors ${(A[e]??`auto`)===t?VW[t]:`bg-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,children:i(`settings.calibrationMode_${t}`)},t))}):(0,G.jsx)(`div`,{className:`flex gap-1 shrink-0`,children:[`off`,`on`].map(t=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>yr(e,t===`on`),className:`px-2.5 py-1 text-xs rounded transition-colors ${(A[e]??r?`on`:`off`)===t?VW[t]:`bg-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,children:i(`settings.calibrationMode_${t}`)},t))})]},e))]})]}),(0,G.jsxs)(Ld,{id:`card-plate`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(ou,{className:`w-4 h-4 text-bambu-green`}),i(`settings.plateClear`,`Plate-Clear Confirmation`)]})}),(0,G.jsx)(zd,{className:`space-y-3`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex-1 mr-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:i(`settings.requirePlateClear`,`Require plate-clear confirmation`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.requirePlateClearDescription`,`When enabled, the scheduler waits for per-printer plate-clear confirmation before starting queued prints on printers with finished jobs. Disabling this also hides the plate status badge and the "Mark plate as cleared" button on printer cards.`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.require_plate_clear??!1,onChange:e=>yr(`require_plate_clear`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]})})]}),(0,G.jsxs)(Ld,{id:`card-temp-fan-presets`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(ju,{className:`w-4 h-4 text-bambu-green`}),i(`settings.tempFanPresetsTitle`,`Temperature & Fan Presets`)]})}),(0,G.jsxs)(zd,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.tempFanPresetsDescription`,`Customize the quick-select values shown in printer-card temperature and fan-speed popovers. The Off button is always shown.`)}),Lee.map(e=>{let t=wm(A?.[e.key]??``,e.defaults,e.lo,e.hi),n=e.unit===`C`?`°C`:`%`;return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-1`,children:[(0,G.jsxs)(`label`,{className:`text-sm text-white`,children:[i(`settings.${{nozzle_temp_presets:`tempFanPresetsNozzle`,bed_temp_presets:`tempFanPresetsBed`,chamber_temp_presets:`tempFanPresetsChamber`,fan_speed_presets:`tempFanPresetsFan`}[e.key]}`,{nozzle_temp_presets:`Nozzle temperature`,bed_temp_presets:`Bed temperature`,chamber_temp_presets:`Chamber temperature`,fan_speed_presets:`Fan speed`}[e.key]),` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray text-xs`,children:[`(`,n,` · `,e.lo,`–`,e.hi,`)`]})]}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>yr(e.key,``),title:i(`settings.tempFanPresetsReset`,`Reset to defaults`),className:`text-bambu-gray hover:text-white transition-colors p-1 rounded hover:bg-bambu-dark-tertiary`,children:(0,G.jsx)(Ul,{className:`w-3.5 h-3.5`})})]}),(0,G.jsx)(`div`,{className:`flex gap-2`,children:[0,1,2].map(n=>(0,G.jsx)(`input`,{type:`number`,min:e.lo,max:e.hi,value:t[n],onChange:r=>{let i=[t[0],t[1],t[2]],a=parseInt(r.target.value,10);i[n]=Math.max(e.lo,Math.min(e.hi,Number.isFinite(a)?a:e.lo)),yr(e.key,JSON.stringify(i))},className:`flex-1 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`},n))})]},e.key)})]})]}),(0,G.jsxs)(Ld,{id:`card-staggered`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(qc,{className:`w-4 h-4 text-bambu-green`}),i(`settings.staggeredStart`,`Staggered Start`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.staggeredStartDescription`,`Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.`)}),(0,G.jsxs)(`div`,{className:`flex gap-4`,children:[(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.staggerGroupSize`,`Group size`)}),(0,G.jsx)(`input`,{type:`number`,min:1,max:50,value:A.stagger_group_size??2,onChange:e=>yr(`stagger_group_size`,Math.max(1,Math.min(50,parseInt(e.target.value)||1))),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.staggerGroupSizeHelp`,`Printers to start simultaneously per group`)})]}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.staggerInterval`,`Interval (minutes)`)}),(0,G.jsx)(`input`,{type:`number`,min:1,max:60,value:A.stagger_interval_minutes??5,onChange:e=>yr(`stagger_interval_minutes`,Math.max(1,Math.min(60,parseInt(e.target.value)||1))),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.staggerIntervalHelp`,`Delay between each group starting`)})]})]})]})]}),(0,G.jsxs)(Ld,{id:`card-concurrent-uploads`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Ns,{className:`w-4 h-4 text-bambu-green`}),i(`settings.concurrentUploadsTitle`,`Concurrent Uploads`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.concurrentUploadsDescription`,`How many printers the queue may send files to at the same time. Printers receive files slowly (a large print can take several minutes), and each one waits its turn — so on a bigger fleet, raising this is what stops the last printer in a batch from waiting out every transfer before it. Lower it if your network or Bambuddy host struggles with parallel transfers.`)}),(0,G.jsxs)(`div`,{className:`w-full sm:w-1/2`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.concurrentUploadsLabel`,`Printers uploaded to at once`)}),(0,G.jsx)(`input`,{type:`number`,min:1,max:16,value:A.queue_max_concurrent_uploads??4,onChange:e=>yr(`queue_max_concurrent_uploads`,Math.max(1,Math.min(16,parseInt(e.target.value)||1))),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.concurrentUploadsHelp`,`1 sends to one printer at a time (the old behaviour). Default is 4.`)})]})]})]}),(0,G.jsxs)(Ld,{id:`card-preheat`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(mc,{className:`w-4 h-4 text-amber-600 dark:text-amber-400`}),i(`settings.preheatTitle`,`Preheat & Heat Soak`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.preheatDescription`,`Heat the bed (and chamber, if supported) and hold at temperature before each queued print starts. Helpful for engineering filaments (PA, ABS) on printers without an active chamber heater — the bed warms the chamber by radiation while the soak timer runs. The bed target is read from the print file; chamber behaviour depends on printer model.`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex-1 mr-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:i(`settings.preheatEnabled`,`Enable preheat & soak`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:i(`settings.preheatEnabledDesc`,`When off, queued prints dispatch immediately.`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.preheat_enabled??!1,onChange:e=>yr(`preheat_enabled`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 gap-3 pt-1`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.preheatMaxWait`,`Max wait (seconds)`)}),(0,G.jsx)(`input`,{type:`number`,min:60,max:3600,value:A.preheat_max_wait_seconds??900,onChange:e=>yr(`preheat_max_wait_seconds`,Math.max(60,Math.min(3600,parseInt(e.target.value)||900))),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green disabled:opacity-50`,disabled:!(A.preheat_enabled??!1)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.preheatMaxWaitHelp`,`Cap on the chamber warm-up phase before falling through.`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.preheatSoak`,`Soak (seconds)`)}),(0,G.jsx)(`input`,{type:`number`,min:0,max:1800,value:A.preheat_soak_seconds??300,onChange:e=>yr(`preheat_soak_seconds`,Math.max(0,Math.min(1800,parseInt(e.target.value)||0))),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green disabled:opacity-50`,disabled:!(A.preheat_enabled??!1)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.preheatSoakHelp`,`Hold time after target reached or max-wait elapsed.`)})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between pt-2 border-t border-bambu-dark-tertiary/50`,children:[(0,G.jsxs)(`div`,{className:`flex-1 mr-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:i(`settings.keepBedWarm`,`Keep bed warm between prints`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:i(`settings.keepBedWarmDesc`,`While awaiting plate-clear, hold the bed at the keep-warm temperature below so the chamber stays hot — or at the next print's own bed temperature when that is higher. Only applies when the next print needs chamber heating (ASA, ABS, PA, PC etc.). Requires plate-clear confirmation to be enabled.`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.queue_keep_bed_warm??!1,onChange:e=>yr(`queue_keep_bed_warm`,e.target.checked),className:`sr-only peer`,disabled:!(A.preheat_enabled??!1)||!(A.require_plate_clear??!1)}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green peer-disabled:opacity-50 peer-disabled:cursor-not-allowed`})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3 mt-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.keepWarmBedTemp`,`Keep-warm bed temperature (°C)`)}),(0,G.jsx)(`input`,{type:`number`,min:40,max:110,value:A.queue_keep_warm_bed_temp??90,onChange:e=>yr(`queue_keep_warm_bed_temp`,Math.max(40,Math.min(110,parseInt(e.target.value)||90))),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green disabled:opacity-50`,disabled:!(A.preheat_enabled??!1)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.keepWarmBedTempHelp`,`Used whenever the bed's job is to heat the chamber — the keep-warm hold, and preheat when the print file carries no bed temperature. A higher bed temperature from the print file always wins.`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.keepWarmMaxMinutes`,`Stop keeping warm after (minutes)`)}),(0,G.jsx)(`input`,{type:`number`,min:5,max:480,value:A.queue_keep_warm_max_minutes??120,onChange:e=>yr(`queue_keep_warm_max_minutes`,Math.max(5,Math.min(480,parseInt(e.target.value)||120))),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green disabled:opacity-50`,disabled:!(A.queue_keep_bed_warm??!1)||!(A.preheat_enabled??!1)||!(A.require_plate_clear??!1)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.keepWarmMaxMinutesHelp`,`If the plate is not cleared within this time, the heaters are switched off rather than held indefinitely.`)})]})]}),(0,G.jsxs)(`div`,{className:`pt-2 border-t border-bambu-dark-tertiary/50`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-1`,children:[(0,G.jsx)(`label`,{className:`text-sm text-white`,children:i(`settings.preheatFilamentTargetsLabel`,`Per-filament chamber target (°C)`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>yr(`preheat_filament_targets`,``),title:i(`settings.preheatFilamentTargetsReset`,`Reset to defaults`),className:`text-bambu-gray hover:text-white transition-colors p-1 rounded hover:bg-bambu-dark-tertiary`,children:(0,G.jsx)(Ul,{className:`w-3.5 h-3.5`})})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:i(`settings.preheatFilamentTargetsHint`,`Bambuddy picks the highest target across the loaded AMS slots; PLA-only prints derive 0 and skip the chamber phase automatically.`)}),(0,G.jsx)(jUe,{value:A.preheat_filament_targets??``,onChange:e=>yr(`preheat_filament_targets`,e),disabled:!(A.preheat_enabled??!1)})]}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray pt-1 border-t border-bambu-dark-tertiary/50`,children:[(0,G.jsx)(`span`,{className:`font-medium text-bambu-gray/90`,children:i(`settings.preheatHardwareTitle`,`Per-printer behaviour:`)}),` `,i(`settings.preheatHardwareDetail`,`H2C/H2D/H2D Pro/H2S/X2D/X1E actively heat the chamber via M141. X1C/P2S read chamber temp but rely on bed-radiation heating. P1S/P1P/A1/A1 Mini have no chamber sensor — only the soak timer applies.`)]})]})]})]}),(0,G.jsxs)(`div`,{className:`lg:w-1/2 space-y-3`,children:[(0,G.jsxs)(Ld,{id:`card-pipelines`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)($u,{className:`w-4 h-4 text-bambu-green`}),i(`settings.pipelineLimits.title`,`Slicer Pipeline limits`)]})}),(0,G.jsx)(zd,{className:`space-y-2`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:i(`settings.pipelineLimits.maxCopiesLabel`,`Max copies per run`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:i(`settings.pipelineLimits.maxCopiesDesc`,`Upper bound on the copies operators can request when running a pipeline. Server-side hard cap is 1000.`)})]}),(0,G.jsx)(`input`,{type:`number`,min:1,max:1e3,value:A.pipeline_max_copies??50,onChange:e=>{let t=parseInt(e.target.value,10);Number.isNaN(t)||yr(`pipeline_max_copies`,Math.max(1,Math.min(1e3,t)))},"aria-label":i(`settings.pipelineLimits.maxCopiesLabel`,`Max copies per run`),className:`w-24 px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm`})]})})]}),(0,G.jsxs)(Ld,{id:`card-slicer`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Rs,{className:`w-4 h-4 text-bambu-green`}),i(`settings.slicerCard`,`Slicer`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[FGe()&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.sliceEngine`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`select`,{value:u5(A.slice_engine),onChange:e=>yr(`slice_engine`,e.target.value),className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:l5().map(e=>(0,G.jsx)(`option`,{value:e.id,children:i(e.labelKey)},e.id))}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(l5().find(e=>e.id===u5(A.slice_engine))?.descriptionKey??`settings.sliceEngineSidecarHint`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.preferredSlicer`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:A.preferred_slicer??`bambu_studio`,onChange:e=>yr(`preferred_slicer`,e.target.value),className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:[(0,G.jsx)(`option`,{value:`bambu_studio`,children:i(`settings.slicerBambuStudio`)}),(0,G.jsx)(`option`,{value:`orcaslicer`,children:i(`settings.slicerOrcaSlicer`)})]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.preferredSlicerDescription`)}),(A.preferred_slicer??`bambu_studio`)===`orcaslicer`&&(0,G.jsx)(`div`,{role:`alert`,className:`text-xs text-amber-800 dark:text-amber-200 bg-amber-50 dark:bg-amber-900/20 border border-amber-300 dark:border-amber-700/40 rounded p-2 mt-2`,children:i(`settings.orcaslicerKnownIssuesWarning`,`OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.openInSlicerLabel`,`Open in Slicer`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`select`,{value:A.open_in_slicer??``,onChange:e=>yr(`open_in_slicer`,e.target.value===``?null:e.target.value),className:`w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer`,children:[(0,G.jsx)(`option`,{value:``,children:i(`settings.openInSlicerInherit`,`Same as API slicer`)}),(0,G.jsx)(`option`,{value:`bambu_studio`,children:i(`settings.slicerBambuStudio`)}),(0,G.jsx)(`option`,{value:`orcaslicer`,children:i(`settings.slicerOrcaSlicer`)})]}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.openInSlicerDescription`,`Desktop slicer used by the 'Open in Slicer' button. Leave on 'Same as API slicer' to inherit, or pick a different slicer to use locally.`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-3`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.useSlicerApi`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.useSlicerApiDescription`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center cursor-pointer shrink-0`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.use_slicer_api??!1,onChange:e=>yr(`use_slicer_api`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`relative w-11 h-6 bg-bambu-dark-tertiary rounded-full peer peer-checked:bg-bambu-green peer-focus:outline-none peer-focus:ring-2 peer-focus:ring-bambu-green/50 transition-colors after:content-[''] after:absolute after:top-0.5 after:left-0.5 after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-transform peer-checked:after:translate-x-5`})]})]}),(A.use_slicer_api??!1)&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:(A.preferred_slicer??`bambu_studio`)===`orcaslicer`?i(`settings.orcaslicerApiUrl`,`OrcaSlicer sidecar URL`):i(`settings.bambuStudioApiUrl`,`Bambu Studio sidecar URL`)}),(0,G.jsx)(`input`,{type:`text`,value:((A.preferred_slicer??`bambu_studio`)===`orcaslicer`?A.orcaslicer_api_url:A.bambu_studio_api_url)??``,onChange:e=>yr((A.preferred_slicer??`bambu_studio`)===`orcaslicer`?`orcaslicer_api_url`:`bambu_studio_api_url`,e.target.value),placeholder:(A.preferred_slicer??`bambu_studio`)===`orcaslicer`?`http://localhost:3003`:`http://localhost:3001`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none placeholder:text-bambu-gray/40`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.slicerApiUrlDescription`,`URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.`)})]}),(A.use_slicer_api??!1)&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.slicerStallTimeout`)}),(0,G.jsx)(`input`,{type:`number`,min:1,max:240,value:A.slicer_stall_timeout_minutes??15,onChange:e=>yr(`slicer_stall_timeout_minutes`,Number(e.target.value)),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:i(`settings.slicerStallTimeoutDescription`)})]})]})]}),(0,G.jsxs)(Ld,{children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,id:`card-drying`,children:[(0,G.jsx)(mc,{className:`w-4 h-4 text-amber-600 dark:text-amber-400`}),i(`settings.queueDrying`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.queueDryingDescription`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-white`,children:i(`settings.queueDryingEnabled`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:i(`settings.queueDryingEnabledDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.queue_drying_enabled??!1,onChange:e=>yr(`queue_drying_enabled`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),A.queue_drying_enabled&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-white`,children:i(`settings.queueDryingBlock`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:i(`settings.queueDryingBlockDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.queue_drying_block??!1,onChange:e=>yr(`queue_drying_block`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-amber-500`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-white`,children:i(`settings.ambientDryingEnabled`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:i(`settings.ambientDryingEnabledDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.ambient_drying_enabled??!1,onChange:e=>yr(`ambient_drying_enabled`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-white`,children:i(`settings.printDryingEnabled`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:i(`settings.printDryingEnabledDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.print_drying_enabled??!1,onChange:e=>yr(`print_drying_enabled`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white font-medium`,children:i(`settings.dryingPresets`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.dryingPresetsDescription`)}),(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full text-xs`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`text-bambu-gray border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`th`,{className:`text-left py-1.5`,children:i(`settings.dryingFilament`)}),(0,G.jsx)(`th`,{className:`text-center py-1.5`,colSpan:2,children:`AMS 2 Pro`}),(0,G.jsx)(`th`,{className:`text-center py-1.5`,colSpan:2,children:`AMS-HT`})]})}),(0,G.jsx)(`tbody`,{children:(()=>{let e={PLA:{n3f:45,n3s:45,n3f_hours:12,n3s_hours:12},PETG:{n3f:65,n3s:65,n3f_hours:12,n3s_hours:12},TPU:{n3f:65,n3s:75,n3f_hours:12,n3s_hours:18},ABS:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},ASA:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},PA:{n3f:65,n3s:85,n3f_hours:12,n3s_hours:12},PC:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},PVA:{n3f:65,n3s:85,n3f_hours:12,n3s_hours:18}},t={...e};try{if(A.drying_presets){let n=JSON.parse(A.drying_presets);typeof n==`object`&&n&&(t={...e,...n})}}catch{}let n=(e,n,r)=>{let i={...t,[e]:{...t[e],[n]:r}};yr(`drying_presets`,JSON.stringify(i))};return Object.entries(t).map(([e,t])=>(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/50`,children:[(0,G.jsx)(`td`,{className:`py-1.5 pr-2 text-white font-medium`,children:e}),(0,G.jsx)(`td`,{className:`py-1 px-1`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-1`,children:[(0,G.jsx)(`input`,{type:`number`,min:30,max:65,value:t.n3f,onChange:t=>n(e,`n3f`,Math.max(1,parseInt(t.target.value)||0)),className:`w-14 px-1.5 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-center text-xs focus:border-amber-500/50 focus:outline-none [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`°C`})]})}),(0,G.jsx)(`td`,{className:`py-1 px-1`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`input`,{type:`number`,min:1,max:24,value:t.n3f_hours,onChange:t=>n(e,`n3f_hours`,Math.max(1,parseInt(t.target.value)||0)),className:`w-14 px-1.5 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-center text-xs focus:border-amber-500/50 focus:outline-none [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`h`})]})}),(0,G.jsx)(`td`,{className:`py-1 px-1`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-1`,children:[(0,G.jsx)(`input`,{type:`number`,min:30,max:85,value:t.n3s,onChange:t=>n(e,`n3s`,Math.max(1,parseInt(t.target.value)||0)),className:`w-14 px-1.5 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-center text-xs focus:border-amber-500/50 focus:outline-none [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`°C`})]})}),(0,G.jsx)(`td`,{className:`py-1 px-1`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`input`,{type:`number`,min:1,max:24,value:t.n3s_hours,onChange:t=>n(e,`n3s_hours`,Math.max(1,parseInt(t.target.value)||0)),className:`w-14 px-1.5 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-center text-xs focus:border-amber-500/50 focus:outline-none [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`h`})]})})]},e))})()})]})})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white font-medium`,children:i(`settings.humidityThresholds`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.humidityThresholdsDescription`)}),(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full text-xs`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`text-bambu-gray border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`th`,{className:`text-left py-1.5`,children:i(`settings.dryingFilament`)}),(0,G.jsx)(`th`,{className:`text-right py-1.5 pr-2`,children:i(`settings.humidityThresholdCol`)})]})}),(0,G.jsx)(`tbody`,{children:(()=>{let e=A.ams_humidity_fair??60,t=[`PLA`,`PETG`,`TPU`,`ABS`,`ASA`,`PA`,`PC`,`PVA`],n={};try{if(A.ams_humidity_thresholds){let e=JSON.parse(A.ams_humidity_thresholds);typeof e==`object`&&e&&(n=e)}}catch{}let r=[{key:`default`,label:i(`settings.humidityThresholdDefault`),value:Number(n.default??e),isDefault:!0},...t.map(t=>({key:t,label:t,value:Number(n[t]??n.default??e),isDefault:!1}))],a=(e,t)=>{if(t.trim()===``){let t={...n};delete t[e],yr(`ams_humidity_thresholds`,JSON.stringify(t));return}let r=parseInt(t,10);if(Number.isNaN(r))return;let i=Math.max(5,Math.min(95,r)),a={...n,[e]:i};yr(`ams_humidity_thresholds`,JSON.stringify(a))};return r.map(e=>{let t=M[e.key],n=t===void 0?String(e.value):t;return(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/50`,children:[(0,G.jsx)(`td`,{className:`py-1.5 pr-2 font-medium ${e.isDefault?`text-bambu-gray italic`:`text-white`}`,children:e.label}),(0,G.jsx)(`td`,{className:`py-1 pr-2`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-1`,children:[(0,G.jsx)(`input`,{type:`number`,min:5,max:95,value:n,onChange:t=>N(n=>({...n,[e.key]:t.target.value})),onBlur:t=>{a(e.key,t.target.value),N(t=>{let n={...t};return delete n[e.key],n})},onKeyDown:e=>{e.key===`Enter`&&e.currentTarget.blur()},className:`w-14 px-1.5 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-center text-xs focus:border-amber-500/50 focus:outline-none [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`%`})]})})]},e.key)})})()})]})})]})]})]}),(0,G.jsxs)(Ld,{id:`card-gcode`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Fs,{className:`w-4 h-4 text-bambu-green`}),i(`settings.gcodeInjection`,`G-code Injection`)]})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.gcodeInjectionDescription`,`Configure custom G-code to inject at the start and/or end of prints for auto-print systems like Farmloop, SwapMod, AutoClear, and Printflow 3D. Snippets are configured per printer model and applied when "Inject G-code" is enabled on a queue item.`)}),(()=>{let e=(()=>{try{return A.gcode_snippets?JSON.parse(A.gcode_snippets):{}}catch{return{}}})(),t=[...new Set((sn||[]).filter(e=>e.model).map(e=>e.model))].sort(),n=(t,n,r)=>{let i={...e};i[t]||(i[t]={start_gcode:``,end_gcode:``}),i[t][n]=r,!i[t].start_gcode&&!i[t].end_gcode&&delete i[t];let a=Object.keys(i).length>0?JSON.stringify(i):``;j(e=>e?{...e,gcode_snippets:a}:null),pr.current=a},r=()=>{pr.current!==null&&(_r.mutate({gcode_snippets:pr.current}),pr.current=null)};return t.length===0?(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic`,children:i(`settings.gcodeInjectionNoPrinters`,`No printers found. Add printers to configure G-code snippets.`)}):t.map(t=>{let a=e[t]||{start_gcode:``,end_gcode:``},o=!!(a.start_gcode||a.end_gcode);return(0,G.jsx)(qp,{defaultOpen:o,className:`border border-bambu-dark-tertiary rounded-lg px-3 py-2`,summary:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-white`,children:t}),o&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-bambu-green/20 text-bambu-green`,children:i(`settings.gcodeConfigured`,`Configured`)})]}),children:(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.gcodeStartLabel`,`Start G-code`)}),(0,G.jsx)(`textarea`,{value:a.start_gcode,onChange:e=>n(t,`start_gcode`,e.target.value),onBlur:r,placeholder:i(`settings.gcodeStartPlaceholder`,`G-code prepended before the print starts...`),rows:3,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-xs font-mono focus:outline-none focus:border-bambu-green resize-y`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1`,children:i(`settings.gcodeEndLabel`,`End G-code`)}),(0,G.jsx)(`textarea`,{value:a.end_gcode,onChange:e=>n(t,`end_gcode`,e.target.value),onBlur:r,placeholder:i(`settings.gcodeEndPlaceholder`,`G-code appended after the print ends...`),rows:3,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-xs font-mono focus:outline-none focus:border-bambu-green resize-y`})]})]})},t)})})()]})]})]})]})]}),je===`filament`&&A&&(0,G.jsx)(G.Fragment,{children:(0,G.jsxs)(`div`,{className:`flex flex-col lg:flex-row gap-4 lg:gap-6`,children:[(0,G.jsxs)(`div`,{className:`lg:w-1/3 space-y-3`,children:[(0,G.jsx)(VWe,{}),(0,G.jsxs)(Ld,{id:`card-filamentchecks`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.filamentChecks`)})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.disableFilamentWarnings`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.disableFilamentWarningsDesc`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.disable_filament_warnings,onChange:e=>yr(`disable_filament_warnings`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.preferLowestFilament`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.preferLowestFilamentDesc`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/70 mt-1`,children:i(`settings.preferLowestFilamentBackupNote`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.prefer_lowest_filament,onChange:e=>yr(`prefer_lowest_filament`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]})]})]}),(0,G.jsxs)(Ld,{id:`card-printmodal`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.printModal`)})}),(0,G.jsx)(zd,{className:`space-y-3`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.expandCustomMapping`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.expandCustomMappingDescription`)})]}),(0,G.jsxs)(`label`,{className:`relative inline-flex items-center cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.per_printer_mapping_expanded??!1,onChange:e=>yr(`per_printer_mapping_expanded`,e.target.checked),className:`sr-only peer`}),(0,G.jsx)(`div`,{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green`})]})]})})]}),(0,G.jsxs)(Ld,{id:`card-amsthresholds`,children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.amsDisplayThresholds`)})}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.amsThresholdsDescription`)}),(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-white`,children:[(0,G.jsx)(Zs,{className:`w-4 h-4 text-blue-600 dark:text-blue-400`}),(0,G.jsx)(`span`,{className:`font-medium`,children:i(`settings.humidity`)})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[i(`settings.goodGreen`),` ≤`]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,min:`0`,max:`100`,value:A.ams_humidity_good??40,onChange:e=>yr(`ams_humidity_good`,parseInt(e.target.value)||40),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`%`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[i(`settings.fairOrange`),` ≤`]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,min:`0`,max:`100`,value:A.ams_humidity_fair??60,onChange:e=>yr(`ams_humidity_fair`,parseInt(e.target.value)||60),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`%`})]})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.aboveFairBad`)}),(0,G.jsx)(`p`,{className:`text-xs text-amber-700/80 dark:text-amber-400/70`,children:i(`settings.fairAlsoDryingThreshold`)}),(A.ams_humidity_fair??60)<LGe&&(0,G.jsx)(`p`,{className:`text-xs text-red-600 dark:text-red-400`,children:i(`settings.fairBelowDryingFloor`,{floor:LGe})})]}),(0,G.jsxs)(`div`,{className:`space-y-3 pt-2 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-white`,children:[(0,G.jsx)(ju,{className:`w-4 h-4 text-orange-600 dark:text-orange-400`}),(0,G.jsx)(`span`,{className:`font-medium`,children:i(`settings.temperature`)})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[i(`settings.goodBlue`),` ≤`]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,step:`0.5`,min:`0`,max:`60`,value:A.ams_temp_good??28,onChange:e=>yr(`ams_temp_good`,parseFloat(e.target.value)||28),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`°C`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:[i(`settings.fairOrange`),` ≤`]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,step:`0.5`,min:`0`,max:`60`,value:A.ams_temp_fair??35,onChange:e=>yr(`ams_temp_fair`,parseFloat(e.target.value)||35),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`°C`})]})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.aboveFairHot`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.tempAlarmThreshold`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,step:`0.5`,min:`0.5`,max:`120`,value:A.ams_temp_alarm??``,placeholder:String(A.ams_temp_fair??35),onChange:e=>{let t=e.target.value.trim(),n=parseFloat(t);yr(`ams_temp_alarm`,t===``||Number.isNaN(n)?null:n)},className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`°C`})]})]}),(A.ams_temp_alarm??1)<=0&&(0,G.jsx)(`p`,{className:`text-xs text-red-600 dark:text-red-400`,children:i(`settings.tempAlarmMustBePositive`)}),(0,G.jsx)(`p`,{className:`text-xs text-amber-700/80 dark:text-amber-400/70`,children:i(`settings.tempAlarmSeparateFromBand`)})]}),(0,G.jsxs)(`div`,{className:`space-y-3 pt-4 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-white`,children:[(0,G.jsx)(Ws,{className:`w-4 h-4 text-purple-600 dark:text-purple-400`}),(0,G.jsx)(`span`,{className:`font-medium`,children:i(`settings.historyRetention`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:i(`settings.keepSensorHistory`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,min:`1`,max:`365`,value:A.ams_history_retention_days??30,onChange:e=>yr(`ams_history_retention_days`,parseInt(e.target.value)||30),className:`w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`common.days`)})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:i(`settings.historyRetentionDescription`)})]})]})]})]}),(0,G.jsxs)(`div`,{className:`lg:w-2/3 space-y-3`,children:[(0,G.jsx)(HWe,{}),(0,G.jsx)(UWe,{})]})]})}),Ye!==null&&(0,G.jsx)(rf,{title:i(`settings.deleteApiKeyTitle`),message:i(`settings.deleteApiKeyMessage`),confirmText:i(`settings.deleteKey`),variant:`danger`,onConfirm:()=>{on.mutate(Ye),Xe(null)},onCancel:()=>Xe(null)}),P&&(0,G.jsx)(XUe,{plug:I,onClose:()=>{F(!1),L(null)}}),R&&(0,G.jsx)(ZUe,{sensor:B,printers:sn??[],onClose:()=>{z(!1),V(null)}}),ee&&(0,G.jsx)(eWe,{sensor:ne,locations:un??[],onClose:()=>{te(!1),re(null)}}),ie&&(0,G.jsx)(aWe,{onClose:()=>ae(!1)}),le&&(0,G.jsx)(rf,{title:i(`locationHaSensors.deleteAllConfirm.title`),message:i(`locationHaSensors.deleteAllConfirm.message`,{location:le.locationName,count:le.sensorIds.length}),variant:`danger`,isLoading:pn.isPending,onConfirm:()=>pn.mutate(le.sensorIds),onCancel:()=>ue(null)}),de&&(0,G.jsx)(cWe,{provider:pe,onClose:()=>{fe(!1),me(null)}}),he&&(0,G.jsx)(lWe,{template:he,onClose:()=>ge(null)}),xe&&(0,G.jsx)(dWe,{onClose:()=>Se(!1)}),$e&&(0,G.jsx)(rf,{title:i(`settings.clearNotificationLogs`),message:i(`settings.clearLogsMessage`),confirmText:i(`settings.clearLogs`),variant:`warning`,onConfirm:async()=>{et(!1);try{o((await Z.clearNotificationLogs(30)).message,`success`)}catch{o(i(`settings.toast.clearLogsFailed`),`error`)}},onCancel:()=>et(!1)}),tt&&(0,G.jsx)(rf,{title:i(`settings.resetUiPreferences`),message:i(`settings.resetUiPreferencesMessage`),confirmText:i(`settings.resetPreferences`),variant:`default`,onConfirm:()=>{nt(!1),localStorage.clear(),o(i(`settings.toast.uiPreferencesReset`),`success`),setTimeout(()=>window.location.reload(),1e3)},onCancel:()=>nt(!1)}),rt&&(0,G.jsx)(rf,{title:`Turn All Plugs ${rt===`on`?`On`:`Off`}`,message:`This will turn ${rt===`on`?`ON`:`OFF`} all ${Zt?.filter(e=>e.enabled).length||0} enabled smart plugs. ${rt===`off`?`Any running printers may be affected!`:``}`,confirmText:`Turn All ${rt===`on`?`On`:`Off`}`,variant:rt===`off`?`danger`:`warning`,onConfirm:()=>{let e=rt;it(null),dr.mutate(e)},onCancel:()=>it(null)}),at&&Pn?.release_notes&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,onClick:()=>ot(!1),children:(0,G.jsxs)(Ld,{className:`w-full max-w-2xl max-h-[80vh] flex flex-col`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(Rd,{className:`flex flex-row items-center justify-between shrink-0`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white`,children:[`Release Notes - v`,Pn.latest_version]}),Pn.release_name&&Pn.release_name!==Pn.latest_version&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:Pn.release_name})]}),(0,G.jsx)(`button`,{onClick:()=>ot(!1),className:`p-1 rounded hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(zd,{className:`overflow-y-auto flex-1`,children:(0,G.jsx)(`pre`,{className:`text-sm text-bambu-gray whitespace-pre-wrap font-sans`,children:Pn.release_notes})}),(0,G.jsxs)(`div`,{className:`p-4 border-t border-bambu-dark-tertiary shrink-0 flex gap-2`,children:[Pn.release_url&&(0,G.jsx)(`a`,{href:Pn.release_url,target:`_blank`,rel:`noopener noreferrer`,className:`flex-1`,children:(0,G.jsxs)(Q,{variant:`secondary`,className:`w-full`,children:[(0,G.jsx)(nc,{className:`w-4 h-4`}),`View on GitHub`]})}),(0,G.jsx)(Q,{onClick:()=>ot(!1),className:`flex-1`,children:`Close`})]})]})}),je===`users`&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex gap-1 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`button`,{onClick:()=>Pe(`users`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${Ne===`users`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(Hu,{className:`w-4 h-4`}),i(`settings.tabs.users`)]}),(0,G.jsxs)(`button`,{onClick:()=>Pe(`email`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${Ne===`email`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(il,{className:`w-4 h-4`}),i(`settings.tabs.emailAuth`)||`Email Authentication`,Hn?.advanced_auth_enabled&&(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full bg-green-400`})]}),(0,G.jsxs)(`button`,{onClick:()=>Pe(`ldap`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${Ne===`ldap`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(ou,{className:`w-4 h-4`}),i(`settings.tabs.ldap`)||`LDAP`,Un?.ldap_enabled&&(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full bg-green-400`})]}),(0,G.jsxs)(`button`,{onClick:()=>Pe(`twofa`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px flex items-center gap-2 ${Ne===`twofa`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(ou,{className:`w-4 h-4`}),i(`settings.tabs.twoFa`),(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full ${Wn?.totp_enabled||Wn?.email_otp_enabled?`bg-green-400`:`bg-bambu-gray/40`}`})]}),l&&(0,G.jsxs)(`button`,{onClick:()=>Pe(`oidc`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px flex items-center gap-2 ${Ne===`oidc`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(kc,{className:`w-4 h-4`}),i(`settings.tabs.oidc`),(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full ${Gn.some(e=>e.is_enabled)?`bg-green-400`:`bg-bambu-gray/40`}`})]}),l&&(0,G.jsxs)(`button`,{onClick:()=>Pe(`security`),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px flex items-center gap-2 ${Ne===`security`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent`}`,children:[(0,G.jsx)(ou,{className:`w-4 h-4`}),i(`settings.tabs.security`)]})]}),Ne===`users`&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-4`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full flex items-center justify-center ${s?`bg-green-500/20`:`bg-gray-500/20`}`,children:s?(0,G.jsx)(tl,{className:`w-5 h-5 text-green-600 dark:text-green-400`}):(0,G.jsx)(el,{className:`w-5 h-5 text-gray-400`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-white font-medium`,children:i(`settings.authentication`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(s?`settings.authEnabledDescription`:`settings.authDisabledDescription`)})]})]}),s?c?.is_admin&&(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>ct(!0),children:[(0,G.jsx)(el,{className:`w-4 h-4`}),i(`common.disable`)]}):(0,G.jsxs)(Q,{onClick:()=>t(`/setup`),children:[(0,G.jsx)(tl,{className:`w-4 h-4`}),i(`common.enable`)]})]})})}),Hn?.advanced_auth_enabled&&(0,G.jsx)(Ld,{className:`border-blue-500/30 bg-blue-500/5`,children:(0,G.jsx)(zd,{className:`py-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full flex items-center justify-center bg-blue-500/20 flex-shrink-0`,children:(0,G.jsx)(il,{className:`w-5 h-5 text-blue-600 dark:text-blue-400`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-white font-medium`,children:i(`settings.email.advancedAuthEnabled`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:i(`settings.email.advancedAuthEnabledDesc`)})]})]})})}),s&&(0,G.jsxs)(`div`,{className:`grid grid-cols-1 xl:grid-cols-2 gap-6`,children:[(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(Ld,{id:`card-session-policy`,children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`h3`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(tl,{className:`w-5 h-5 text-bambu-green`}),i(`settings.sessionPolicy.title`)]})}),(0,G.jsxs)(zd,{children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4`,children:i(`settings.sessionPolicy.description`)}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 sm:grid-cols-4 gap-2 mb-4`,children:[[{hours:24,labelKey:`settings.sessionPolicy.preset24h`},{hours:168,labelKey:`settings.sessionPolicy.preset7d`},{hours:720,labelKey:`settings.sessionPolicy.preset30d`}].map(e=>{let t=(A?.session_max_hours??24)===e.hours;return(0,G.jsx)(`button`,{type:`button`,onClick:()=>yr(`session_max_hours`,e.hours),disabled:s&&!d(`settings:update`),className:`px-3 py-2 rounded-lg text-sm font-medium transition-colors ${t?`bg-bambu-green text-white`:`bg-bambu-dark-tertiary text-bambu-gray hover:text-white hover:bg-bambu-dark`} disabled:opacity-50 disabled:cursor-not-allowed`,children:i(e.labelKey)},e.hours)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`input`,{type:`number`,min:1,max:720,value:A?.session_max_hours??24,onChange:e=>{let t=parseInt(e.target.value,10);Number.isNaN(t)||yr(`session_max_hours`,Math.max(1,Math.min(720,t)))},disabled:s&&!d(`settings:update`),"aria-label":i(`settings.sessionPolicy.customHoursLabel`),className:`w-20 px-2 py-2 bg-bambu-dark-tertiary text-white text-sm rounded-lg border border-bambu-dark-tertiary focus:border-bambu-green focus:outline-none disabled:opacity-50`}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:i(`settings.sessionPolicy.hoursSuffix`)})]})]}),(A?.session_max_hours??24)>24&&(0,G.jsxs)(`div`,{className:`flex items-start gap-2 p-3 rounded-lg bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-600 dark:text-yellow-400 flex-shrink-0 mt-0.5`}),(0,G.jsx)(`p`,{className:`text-xs text-yellow-800 dark:text-yellow-200`,children:i(`settings.sessionPolicy.warning`)})]})]})]}),c&&(0,G.jsxs)(Ld,{children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`h3`,{className:`text-lg font-semibold text-white flex items-center gap-2`,id:`card-currentuser`,children:[(0,G.jsx)(Hu,{className:`w-5 h-5 text-bambu-green`}),i(`settings.currentUser`)]}),c.auth_source!==`ldap`&&(0,G.jsxs)(Q,{size:`sm`,variant:`ghost`,onClick:()=>ut(!0),children:[(0,G.jsx)(Gc,{className:`w-4 h-4`}),i(`settings.changePassword`)]})]})}),(0,G.jsx)(zd,{children:(0,G.jsx)(`div`,{className:`flex items-center justify-between`,children:(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium text-lg`,children:c.username}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-1 mt-2`,children:[c.is_admin&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded-full text-xs font-medium bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-300`,children:i(`settings.admin`)}),c.groups?.map(e=>(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded-full text-xs font-medium ${e.name===`Administrators`?`bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-300`:e.name===`Operators`?`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-300`:e.name===`Viewers`?`bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-300`:`bg-gray-500/20 text-gray-300`}`,children:e.name},e.id))]})]})})})]}),(0,G.jsxs)(Ld,{children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`h3`,{className:`text-lg font-semibold text-white flex items-center gap-2`,id:`card-users`,children:[(0,G.jsx)(Hu,{className:`w-5 h-5 text-bambu-green`}),i(`settings.users`)]}),d(`users:create`)&&(0,G.jsxs)(Q,{size:`sm`,onClick:()=>{vt(!0),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]})},children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`settings.addUser`)]})]})}),(0,G.jsx)(zd,{children:qn?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})}):Kn.length===0?(0,G.jsx)(`p`,{className:`text-center text-bambu-gray py-8`,children:i(`settings.noUsersFound`)}):(0,G.jsx)(`div`,{className:`divide-y divide-bambu-dark-tertiary`,children:Kn.map(e=>(0,G.jsxs)(`div`,{className:`py-3 flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium truncate`,children:e.username}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-1 mt-1`,children:[e.auth_source===`ldap`&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded-full text-xs font-medium bg-cyan-100 dark:bg-cyan-500/20 text-cyan-700 dark:text-cyan-300`,children:`LDAP`}),e.is_admin&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded-full text-xs font-medium bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-300`,children:i(`settings.admin`)}),e.groups?.map(e=>(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded-full text-xs font-medium ${e.name===`Administrators`?`bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-300`:e.name===`Operators`?`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-300`:e.name===`Viewers`?`bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-300`:`bg-gray-500/20 text-gray-300`}`,children:e.name},e.id))]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 ml-4`,children:[d(`users:update`)&&(0,G.jsx)(Q,{size:`sm`,variant:`ghost`,onClick:()=>ir(e),children:(0,G.jsx)(Ol,{className:`w-4 h-4`})}),d(`users:delete`)&&e.id!==c?.id&&(0,G.jsx)(Q,{size:`sm`,variant:`ghost`,onClick:()=>er(e.id),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})]},e.id))})})]})]}),(0,G.jsx)(`div`,{children:(0,G.jsxs)(Ld,{children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`h3`,{className:`text-lg font-semibold text-white flex items-center gap-2`,id:`card-groups`,children:[(0,G.jsx)(ou,{className:`w-5 h-5 text-bambu-green`}),i(`settings.groups`)]}),d(`groups:create`)&&(0,G.jsxs)(Q,{size:`sm`,onClick:()=>t(`/groups/new`),children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`settings.addGroup`)]})]})}),(0,G.jsx)(zd,{children:Yn?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 text-bambu-green animate-spin`})}):Jn.length===0?(0,G.jsx)(`p`,{className:`text-center text-bambu-gray py-8`,children:i(`settings.noGroupsFound`)}):(0,G.jsx)(`div`,{className:`divide-y divide-bambu-dark-tertiary`,children:Jn.map(e=>(0,G.jsxs)(`div`,{className:`py-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(ou,{className:`w-4 h-4 ${e.name===`Administrators`?`text-purple-600 dark:text-purple-400`:e.name===`Operators`?`text-blue-600 dark:text-blue-400`:e.name===`Viewers`?`text-green-600 dark:text-green-400`:`text-bambu-gray`}`}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:e.name}),e.is_system&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded text-xs bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`,children:i(`settings.system`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[d(`groups:update`)&&(0,G.jsx)(Q,{size:`sm`,variant:`ghost`,onClick:()=>t(`/groups/${e.id}/edit`),children:(0,G.jsx)(Ol,{className:`w-4 h-4`})}),d(`groups:delete`)&&!e.is_system&&(0,G.jsx)(Q,{size:`sm`,variant:`ghost`,onClick:()=>Ft(e.id),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1 ml-6`,children:e.description||i(`settings.noDescription`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-4 mt-2 ml-6 text-xs text-bambu-gray`,children:[(0,G.jsx)(`span`,{children:i(`settings.userCount`,{count:e.user_count})}),(0,G.jsx)(`span`,{children:i(`settings.permissionCount`,{count:e.permissions.length})})]})]},e.id))})})]})})]}),!s&&(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-6`,children:(0,G.jsxs)(`div`,{className:`text-center`,children:[(0,G.jsx)(el,{className:`w-12 h-12 text-bambu-gray mx-auto mb-4`}),(0,G.jsx)(`h3`,{className:`text-lg font-medium text-white mb-2`,children:i(`settings.authDisabledTitle`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4 max-w-md mx-auto`,children:i(`settings.authDisabledMessage`)}),(0,G.jsxs)(`ul`,{className:`space-y-2 text-sm text-bambu-gray mb-6 text-left max-w-xs mx-auto`,children:[(0,G.jsxs)(`li`,{className:`flex items-start gap-2`,children:[(0,G.jsx)(xs,{className:`w-4 h-4 text-bambu-green mt-0.5 flex-shrink-0`}),(0,G.jsx)(`span`,{children:i(`settings.authDisabledFeature1`)})]}),(0,G.jsxs)(`li`,{className:`flex items-start gap-2`,children:[(0,G.jsx)(xs,{className:`w-4 h-4 text-bambu-green mt-0.5 flex-shrink-0`}),(0,G.jsx)(`span`,{children:i(`settings.authDisabledFeature2`)})]}),(0,G.jsxs)(`li`,{className:`flex items-start gap-2`,children:[(0,G.jsx)(xs,{className:`w-4 h-4 text-bambu-green mt-0.5 flex-shrink-0`}),(0,G.jsx)(`span`,{children:i(`settings.authDisabledFeature3`)})]})]}),(0,G.jsxs)(Q,{onClick:()=>t(`/setup`),children:[(0,G.jsx)(tl,{className:`w-4 h-4`}),i(`settings.enableAuthentication`)]})]})})})]}),Ne===`email`&&(0,G.jsx)(`div`,{className:`max-w-5xl`,id:`card-smtp`,children:(0,G.jsx)(_Ge,{})}),Ne===`ldap`&&(0,G.jsx)(`div`,{className:`max-w-5xl`,id:`card-ldap`,children:(0,G.jsx)(yGe,{})}),Ne===`twofa`&&(0,G.jsx)(`div`,{className:`max-w-2xl`,children:(0,G.jsx)(SGe,{})}),Ne===`oidc`&&l&&(0,G.jsxs)(`div`,{className:`max-w-3xl space-y-4`,children:[(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`space-y-3 p-4`,children:(0,G.jsxs)(`label`,{className:`flex items-start gap-3 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:A.local_login_enabled===!1,onChange:e=>yr(`local_login_enabled`,!e.target.checked),className:`mt-1 h-4 w-4 rounded border-bambu-dark-tertiary bg-bambu-dark-secondary text-bambu-green focus:ring-bambu-green/50 cursor-pointer`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white`,children:i(`settings.localLogin.disable`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:i(`settings.localLogin.disableHint`)})]})]})})}),(0,G.jsx)(EGe,{})]}),Ne===`security`&&l&&(0,G.jsx)(`div`,{className:`max-w-3xl`,children:(0,G.jsx)(kGe,{})})]}),_t&&!Hn?.advanced_auth_enabled&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black flex items-center justify-center z-50 p-4`,onClick:()=>{vt(!1),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]})},children:(0,G.jsxs)(Ld,{className:`w-full max-w-md`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Hu,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.createUser`)})]}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>{vt(!1),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]})},children:(0,G.jsx)(td,{className:`w-5 h-5`})})]})}),(0,G.jsxs)(zd,{children:[Un?.ldap_enabled&&(0,G.jsxs)(`div`,{className:`mb-4 flex items-center gap-1 p-1 bg-bambu-dark-secondary rounded-lg`,role:`tablist`,"aria-label":i(`users.modal.tabsAriaLabel`),children:[(0,G.jsx)(`button`,{type:`button`,role:`tab`,"aria-selected":yt===`local`,onClick:()=>bt(`local`),className:`flex-1 px-3 py-2 text-sm rounded-md transition-colors ${yt===`local`?`bg-bambu-green/15 text-bambu-green`:`text-bambu-gray hover:text-white`}`,children:i(`users.modal.localTab`)}),(0,G.jsx)(`button`,{type:`button`,role:`tab`,"aria-selected":yt===`ldap`,onClick:()=>bt(`ldap`),className:`flex-1 px-3 py-2 text-sm rounded-md transition-colors ${yt===`ldap`?`bg-bambu-green/15 text-bambu-green`:`text-bambu-gray hover:text-white`}`,children:i(`users.modal.ldapTab`)})]}),yt===`ldap`&&Un?.ldap_enabled?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(RWe,{onSuccess:e=>{vt(!1),bt(`local`),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]}),o(i(`users.toast.ldapProvisioned`,{username:e.username}))}}),(0,G.jsx)(`div`,{className:`mt-6 flex justify-end`,children:(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{vt(!1),bt(`local`),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]})},children:i(`common.cancel`)})})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:i(`settings.username`)}),(0,G.jsx)(`input`,{type:`text`,value:Mt.username,onChange:e=>Nt({...Mt,username:e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:i(`settings.enterUsername`),autoComplete:`username`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:i(`settings.password`)}),(0,G.jsx)(`input`,{type:`password`,value:Mt.password,onChange:e=>Nt({...Mt,password:e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:i(`settings.enterPassword`),autoComplete:`new-password`,minLength:8}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-xs mt-1`,children:i(`settings.passwordRequirements`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:i(`settings.confirmPassword`)}),(0,G.jsx)(`input`,{type:`password`,value:Mt.confirmPassword,onChange:e=>Nt({...Mt,confirmPassword:e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors ${Mt.confirmPassword&&Mt.password!==Mt.confirmPassword?`border-red-500`:`border-bambu-dark-tertiary`}`,placeholder:i(`settings.confirmPasswordPlaceholder`),autoComplete:`new-password`,minLength:6}),Mt.confirmPassword&&Mt.password!==Mt.confirmPassword&&(0,G.jsx)(`p`,{className:`text-red-700 dark:text-red-400 text-xs mt-1`,children:i(`settings.passwordsDoNotMatch`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:i(`settings.groups`)}),(0,G.jsxs)(`div`,{className:`space-y-2 max-h-40 overflow-y-auto p-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg`,children:[Jn.map(e=>(0,G.jsxs)(`label`,{className:`flex items-center gap-3 px-2 py-1.5 rounded hover:bg-bambu-dark-tertiary cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Mt.group_ids.includes(e.id),onChange:()=>ar(e.id),className:`w-4 h-4 rounded border-bambu-gray text-bambu-green focus:ring-bambu-green focus:ring-offset-0 bg-bambu-dark`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:e.name}),e.is_system&&(0,G.jsx)(`span`,{className:`text-xs text-yellow-700 dark:text-yellow-400`,children:i(`settings.systemBadge`)})]},e.id)),Jn.length===0&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`settings.noGroupsAvailable`)})]})]})]}),(0,G.jsxs)(`div`,{className:`mt-6 flex justify-end gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{vt(!1),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]})},children:i(`common.cancel`)}),(0,G.jsx)(Q,{onClick:nr,disabled:Xn.isPending||!Mt.username||!Mt.password||Mt.password!==Mt.confirmPassword||w8(Mt.password)!==null,children:Xn.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),i(`settings.creating`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),i(`settings.createUser`)]})})]})]})]})]})}),_t&&Hn?.advanced_auth_enabled&&(0,G.jsx)(BWe,{formData:Mt,setFormData:Nt,groups:Jn,onClose:()=>{vt(!1),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]})},onCreate:nr,isCreating:Xn.isPending,isCreateButtonDisabled:Xn.isPending||!Mt.username||!Mt.email,ldapEnabled:Un?.ldap_enabled,onLdapProvisioned:e=>{vt(!1),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]}),o(i(`users.toast.ldapProvisioned`,{username:e.username}))}}),xt&&Ct!==null&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black flex items-center justify-center z-50 p-4`,onClick:()=>{St(!1),wt(null),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]})},children:(0,G.jsxs)(Ld,{className:`w-full max-w-md`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Ol,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.editUser`)})]}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>{St(!1),wt(null),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]})},children:(0,G.jsx)(td,{className:`w-5 h-5`})})]})}),(0,G.jsxs)(zd,{children:[(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:[i(`settings.username`),` `,Hn?.advanced_auth_enabled&&(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:`*`})]}),(0,G.jsx)(`input`,{type:`text`,value:Mt.username,onChange:e=>Nt({...Mt,username:e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:i(`settings.enterUsername`),autoComplete:`username`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:[i(`users.form.email`)||`Email`,` `,Hn?.advanced_auth_enabled?(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:`*`}):(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,i(`users.form.optional`)||`optional`,`)`]})]}),(0,G.jsx)(`input`,{type:`email`,value:Mt.email,onChange:e=>Nt({...Mt,email:e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:i(`users.form.emailPlaceholder`)||`user@example.com`,required:Hn?.advanced_auth_enabled})]}),!Hn?.advanced_auth_enabled&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:[i(`users.form.password`)||`Password`,` `,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal`,children:[`(`,i(`users.form.leaveBlankToKeep`)||`leave blank to keep current`,`)`]})]}),(0,G.jsx)(`input`,{type:`password`,value:Mt.password,onChange:e=>Nt({...Mt,password:e.target.value,confirmPassword:``}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:i(`settings.enterNewPassword`),autoComplete:`new-password`,minLength:8}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-xs mt-1`,children:i(`settings.passwordRequirements`)})]}),Mt.password&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:i(`settings.confirmPassword`)}),(0,G.jsx)(`input`,{type:`password`,value:Mt.confirmPassword,onChange:e=>Nt({...Mt,confirmPassword:e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors ${Mt.confirmPassword&&Mt.password!==Mt.confirmPassword?`border-red-500`:`border-bambu-dark-tertiary`}`,placeholder:i(`settings.confirmNewPassword`),autoComplete:`new-password`,minLength:6}),Mt.confirmPassword&&Mt.password!==Mt.confirmPassword&&(0,G.jsx)(`p`,{className:`text-red-700 dark:text-red-400 text-xs mt-1`,children:i(`settings.passwordsDoNotMatch`)})]})]}),Hn?.advanced_auth_enabled&&(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary/50 border border-bambu-green/20 rounded-lg p-3 space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`users.form.passwordManagedByAdvancedAuth`)||`Password is managed by Advanced Authentication. Use "Reset Password" to send a new password to the user via email.`}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>Ct&&$n.mutate(Ct),disabled:$n.isPending||!Mt.email,className:`w-full`,children:$n.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),i(`users.form.resettingPassword`)||`Resetting Password...`]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ul,{className:`w-4 h-4`}),i(`users.form.resetPassword`)||`Reset Password`]})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:i(`users.form.groups`)||`Groups`}),(0,G.jsx)(`div`,{className:`space-y-2 max-h-40 overflow-y-auto p-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg`,children:Jn.map(e=>(0,G.jsxs)(`label`,{className:`flex items-center gap-3 px-2 py-1.5 rounded hover:bg-bambu-dark-tertiary cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:Mt.group_ids.includes(e.id),onChange:()=>ar(e.id),className:`w-4 h-4 rounded border-bambu-gray text-bambu-green focus:ring-bambu-green focus:ring-offset-0 bg-bambu-dark`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:e.name}),e.is_system&&(0,G.jsxs)(`span`,{className:`text-xs text-yellow-700 dark:text-yellow-400`,children:[`(`,i(`users.system`)||`System`,`)`]})]},e.id))})]})]}),(0,G.jsxs)(`div`,{className:`mt-6 flex justify-end gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{St(!1),wt(null),Nt({username:``,password:``,email:``,confirmPassword:``,role:`user`,group_ids:[]})},children:i(`users.modal.cancel`)||`Cancel`}),(0,G.jsx)(Q,{onClick:()=>rr(Ct),disabled:Zn.isPending||!Mt.username||Hn?.advanced_auth_enabled&&!Mt.email||!!(!Hn?.advanced_auth_enabled&&Mt.password&&(Mt.password!==Mt.confirmPassword||w8(Mt.password)!==null)),children:Zn.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),i(`users.modal.saving`)||`Saving...`]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Kl,{className:`w-4 h-4`}),i(`users.modal.saveChanges`)||`Save Changes`]})})]})]})]})}),Tt!==null&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/80 flex items-center justify-center z-50 p-4`,onClick:()=>{Et(null),Ot(null)},children:(0,G.jsxs)(Ld,{className:`w-full max-w-md`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-red-700 dark:text-red-400`,children:[(0,G.jsx)(Nu,{className:`w-5 h-5`}),(0,G.jsx)(`h3`,{className:`text-lg font-semibold`,children:i(`settings.deleteUserTitle`)})]})}),(0,G.jsx)(zd,{className:`space-y-3`,children:At?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-4`,children:(0,G.jsx)(`div`,{className:`animate-spin rounded-full h-6 w-6 border-2 border-bambu-green border-t-transparent`})}):Dt&&Dt.archives+Dt.queue_items+Dt.library_files>0?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.userHasCreated`)}),(0,G.jsxs)(`ul`,{className:`list-disc list-inside text-bambu-gray space-y-1`,children:[Dt.archives>0&&(0,G.jsxs)(`li`,{children:[Dt.archives,` archive`,Dt.archives===1?``:`s`]}),Dt.queue_items>0&&(0,G.jsxs)(`li`,{children:[Dt.queue_items,` queue item`,Dt.queue_items===1?``:`s`]}),Dt.library_files>0&&(0,G.jsxs)(`li`,{children:[Dt.library_files,` library file`,Dt.library_files===1?``:`s`]})]}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm`,children:i(`settings.userItemsQuestion`)}),(0,G.jsxs)(`div`,{className:`flex flex-col gap-2`,children:[(0,G.jsx)(Q,{variant:`danger`,onClick:()=>Qn.mutate({id:Tt,deleteItems:!0}),disabled:Qn.isPending,className:`justify-center`,children:i(`settings.deleteUserAndItems`)}),(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>Qn.mutate({id:Tt,deleteItems:!1}),disabled:Qn.isPending,className:`justify-center`,children:i(`settings.deleteUserKeepItems`)}),(0,G.jsx)(Q,{variant:`ghost`,onClick:()=>{Et(null),Ot(null)},disabled:Qn.isPending,className:`justify-center`,children:i(`common.cancel`)})]})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`p`,{className:`text-white`,children:i(`settings.deleteUserConfirm`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm`,children:i(`settings.actionCannotBeUndone`)}),(0,G.jsxs)(`div`,{className:`flex gap-2 justify-end`,children:[(0,G.jsx)(Q,{variant:`ghost`,onClick:()=>{Et(null),Ot(null)},disabled:Qn.isPending,children:i(`common.cancel`)}),(0,G.jsx)(Q,{variant:`danger`,onClick:()=>Qn.mutate({id:Tt,deleteItems:!1}),disabled:Qn.isPending,children:i(`settings.deleteUserTitle`)})]})]})})]})}),Pt!==null&&(0,G.jsx)(rf,{title:i(`settings.deleteGroupTitle`),message:i(`settings.deleteGroupMessage`),confirmText:i(`settings.deleteGroup`),variant:`danger`,onConfirm:()=>{tr.mutate(Pt),Ft(null)},onCancel:()=>Ft(null)}),je===`failure-detection`&&(0,G.jsx)(`div`,{id:`card-failure-detection`,children:(0,G.jsx)(mGe,{})}),je===`backup`&&(0,G.jsxs)(`div`,{id:`card-backup`,children:[(0,G.jsxs)(`div`,{className:`mb-4 p-3 bg-amber-50 dark:bg-amber-500/10 border border-amber-300 dark:border-amber-500/30 rounded-lg flex items-start gap-2`,children:[(0,G.jsx)(ou,{className:`text-amber-600 dark:text-amber-400 flex-shrink-0 mt-0.5`,size:16}),(0,G.jsx)(`p`,{className:`text-sm text-amber-700 dark:text-amber-400`,children:i(`backup.includesEncryptionKey`)})]}),(0,G.jsx)(pGe,{})]}),st&&(0,G.jsx)(rf,{title:i(`settings.disableAuthenticationTitle`),message:i(`settings.disableAuthenticationMessage`),confirmText:i(`settings.disableAuthentication`),variant:`danger`,onConfirm:async()=>{try{await Z.disableAuth(),o(i(`settings.toast.authDisabled`),`success`),await u(),ct(!1),window.location.href=`/`}catch(e){o(e instanceof Error?e.message:i(`settings.toast.authDisableFailed`),`error`)}},onCancel:()=>ct(!1)}),lt&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:()=>{ut(!1),ft({currentPassword:``,newPassword:``,confirmPassword:``})},children:(0,G.jsxs)(Ld,{className:`w-full max-w-md`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Gc,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`settings.changePassword`)})]}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>{ut(!1),ft({currentPassword:``,newPassword:``,confirmPassword:``})},children:(0,G.jsx)(td,{className:`w-5 h-5`})})]})}),(0,G.jsxs)(zd,{children:[(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:`Current Password`}),(0,G.jsx)(`input`,{type:`password`,value:dt.currentPassword,onChange:e=>ft({...dt,currentPassword:e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:i(`settings.enterCurrentPassword`),autoComplete:`current-password`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:`New Password`}),(0,G.jsx)(`input`,{type:`password`,value:dt.newPassword,onChange:e=>ft({...dt,newPassword:e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:i(`settings.enterNewPasswordMin6`),autoComplete:`new-password`,minLength:6})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:`Confirm New Password`}),(0,G.jsx)(`input`,{type:`password`,value:dt.confirmPassword,onChange:e=>ft({...dt,confirmPassword:e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors ${dt.confirmPassword&&dt.newPassword!==dt.confirmPassword?`border-red-500`:`border-bambu-dark-tertiary`}`,placeholder:i(`settings.confirmNewPassword`),autoComplete:`new-password`,minLength:6}),dt.confirmPassword&&dt.newPassword!==dt.confirmPassword&&(0,G.jsx)(`p`,{className:`text-red-700 dark:text-red-400 text-xs mt-1`,children:i(`settings.passwordsDoNotMatch`)})]})]}),(0,G.jsxs)(`div`,{className:`mt-6 flex justify-end gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{ut(!1),ft({currentPassword:``,newPassword:``,confirmPassword:``})},children:i(`common.cancel`)}),(0,G.jsx)(Q,{onClick:async()=>{if(dt.newPassword!==dt.confirmPassword){o(i(`settings.toast.passwordsDoNotMatch`),`error`);return}if(dt.newPassword.length<6){o(i(`settings.toast.passwordTooShort`),`error`);return}mt(!0);try{await Z.changePassword(dt.currentPassword,dt.newPassword),o(i(`settings.toast.passwordChanged`),`success`),ut(!1),ft({currentPassword:``,newPassword:``,confirmPassword:``})}catch(e){o(e instanceof Error?e.message:`Failed to change password`,`error`)}finally{mt(!1)}},disabled:pt||!dt.currentPassword||!dt.newPassword||dt.newPassword!==dt.confirmPassword||dt.newPassword.length<6,children:pt?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),i(`settings.changing`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Gc,{className:`w-4 h-4`}),i(`settings.changePassword`)]})})]})]})]})})]})]})]})})}var WGe=/\[(aborted|failed|cancelled):\s*([^\]]*)\]/i;function GGe(e){if(!e)return{isPartial:!1,partialType:null,cleanedDescription:null};let t=e.match(WGe);if(!t)return{isPartial:!1,partialType:null,cleanedDescription:e};let n=e.replace(t[0],``).trim();return{isPartial:!0,partialType:t[1].toLowerCase(),cleanedDescription:n||null}}function KGe(e,t){if(!e)return`-`;let n=ep(e);return n?n.toLocaleString(t):e}function d5(e){let t=e.trim();if(!t)return null;let n=Number.parseFloat(t);return Number.isFinite(n)?n:null}function qGe(e){return`${e.getFullYear()}-${String(e.getMonth()+1).padStart(2,`0`)}-${String(e.getDate()).padStart(2,`0`)}T${String(e.getHours()).padStart(2,`0`)}:${String(e.getMinutes()).padStart(2,`0`)}`}var f5=`w-full px-3 py-2 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded text-white placeholder-bambu-gray focus:outline-none focus:ring-1 focus:ring-bambu-green`,p5=`block text-sm font-medium text-white mb-1`,m5=`px-4 py-3 text-left text-bambu-gray font-medium`,h5=`px-4 py-3 align-top text-white`;function g5({title:e,onClose:t,children:n,size:r=`md`}){let{t:i}=U();return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/70 p-4`,children:(0,G.jsxs)(`div`,{className:`w-full ${r===`sm`?`max-w-xl`:r===`lg`?`max-w-6xl`:`max-w-4xl`} overflow-hidden rounded-lg border border-bambu-dark-tertiary bg-bambu-dark-secondary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between border-b border-bambu-dark-tertiary px-4 py-3`,children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white`,children:e}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:t,children:i(`common.close`,`Close`)})]}),(0,G.jsx)(`div`,{className:`max-h-[75vh] overflow-auto p-4`,children:n})]})})}function JGe(){let{t:e,i18n:t}=U(),{hasPermission:n,user:r}=jd(),{showToast:i}=Gd(),a=co(),o=n(`cost_centers:read_own`),s=n(`cost_centers:read_all`),c=n(`cost_centers:create`),l=n(`cost_centers:modify`),u=n(`cost_centers:modify`),d=n(`cost_centers:modify`),f=n(`cost_centers:modify`),p=n(`users:read_slim`)||n(`users:read`),m=s||c||l||u||d||f,h=o||m,g=h,[_,v]=(0,y.useState)(``),[b,x]=(0,y.useState)(`monthly`),[S,C]=(0,y.useState)(``),[w,T]=(0,y.useState)(null),[E,D]=(0,y.useState)(`deposit`),[O,k]=(0,y.useState)(``),[A,j]=(0,y.useState)(``),[M,N]=(0,y.useState)(null),[P,F]=(0,y.useState)(null),[I,L]=(0,y.useState)(null),[R,z]=(0,y.useState)(!0),[B,V]=(0,y.useState)(0),[ee,te]=(0,y.useState)(`all`),[ne,re]=(0,y.useState)(`all`),[ie,ae]=(0,y.useState)(!1),[oe,se]=(0,y.useState)(!1),[H,ce]=(0,y.useState)(!1),[le,ue]=(0,y.useState)(!1),[de,fe]=(0,y.useState)(`personal`),[pe,me]=(0,y.useState)(null),[he,ge]=(0,y.useState)(``),[_e,ve]=(0,y.useState)(`monthly`),[ye,be]=(0,y.useState)(``),[xe,Se]=(0,y.useState)(!1),[Ce,we]=(0,y.useState)(null),[Te,Ee]=(0,y.useState)(null),[De,Oe]=(0,y.useState)(null),[ke,Ae]=(0,y.useState)(``),[je,Me]=(0,y.useState)(``),[Ne,Pe]=(0,y.useState)(!1),[Fe,Ie]=(0,y.useState)(null),[Le,Re]=(0,y.useState)(null),[ze,Be]=(0,y.useState)(``),[Ve,He]=(0,y.useState)(``),[Ue,We]=(0,y.useState)(qGe(new Date)),[Ge,Ke]=(0,y.useState)(null),[qe,Je]=(0,y.useState)(null),Ye=s||c||l||u||f&&p||d&&p;(0,y.useEffect)(()=>{Ye||fe(`personal`)},[Ye]);let{data:Xe,isLoading:Ze}=K({queryKey:[`finance`,`me`,`balance`],queryFn:Z.getMyBalance,enabled:o}),{data:Qe}=K({queryKey:[`ui-flags`],queryFn:Z.getUiFlags}),{data:$e,isLoading:et}=K({queryKey:[`finance`,`me`,`transactions`,50,B],queryFn:()=>Z.getMyTransactions(50,B),enabled:o}),{data:tt,isLoading:nt}=K({queryKey:[`finance`,`transactions`,50,B],queryFn:()=>Z.getAllTransactions(50,B),enabled:de===`admin`&&s}),{data:rt,isLoading:it}=K({queryKey:[`finance`,`cost-centers`,de],queryFn:()=>de===`admin`&&m?Z.listCostCenters(!0):Z.getMyCostCenters(),enabled:g}),{data:at}=K({queryKey:[`users`,`slim`],queryFn:Z.getUsersSlim,enabled:p&&(g||f||d)}),{data:ot}=K({queryKey:[`finance`,`cost-center`,P],queryFn:()=>Z.getCostCenter(P),enabled:d&&P!=null});(0,y.useEffect)(()=>{!at||at.length===0||w!=null&&at.some(e=>e.id===w)||T(at[0].id)},[at,w]),(0,y.useEffect)(()=>{if(!d)return;let e=(rt||[]).filter(e=>!e.is_private);if(e.length===0){F(null);return}P!=null&&e.some(e=>e.id===P)||F(e[0].id)},[d,rt,P]),(0,y.useEffect)(()=>{if(!d||!at||at.length===0)return;let e=new Set((ot?.members||[]).map(e=>e.user_id)),t=at.find(t=>!e.has(t.id));L(t?t.id:null)},[d,at,ot]),(0,y.useEffect)(()=>{if(!le)return;let e=rt||[];if(e.length===0){me(null);return}pe!=null&&e.some(e=>e.id===pe)||me(e[0].id)},[le,pe,rt]),(0,y.useEffect)(()=>{if(!le||pe==null)return;let e=(rt||[]).find(e=>e.id===pe);if(e){if(ge(e.name),e.budget_mode===`total`){ve(`total`),be(e.total_budget==null?``:String(e.total_budget));return}ve(`monthly`),be(e.monthly_budget==null?``:String(e.monthly_budget))}},[le,pe,rt]);let st=q({mutationFn:()=>Z.createCostCenter({name:_.trim(),total_budget:b===`total`?d5(S):null,monthly_budget:b===`monthly`?d5(S):null,is_active:!0}),onSuccess:()=>{a.invalidateQueries({queryKey:[`finance`]}),v(``),C(``),i(e(`finance.createdCostCenter`,`Cost center created`))},onError:t=>{i(t.message||e(`finance.createCostCenterFailed`,`Failed to create cost center`),`error`)}}),ct=q({mutationFn:({costCenterId:e,value:t,mode:n})=>Z.updateCostCenterBudgets(e,{total_budget:n===`total`?d5(t):null,monthly_budget:n===`monthly`?d5(t):null})}),lt=q({mutationFn:({costCenterId:e,name:t})=>Z.updateCostCenter(e,{name:t})}),ut=q({mutationFn:e=>Z.deleteCostCenter(e)}),dt=q({mutationFn:e=>Z.deleteTransaction(e),onSuccess:()=>{a.invalidateQueries({queryKey:[`finance`]}),i(e(`finance.transactionDeleted`,`Transaction deleted`))},onError:t=>{i(t.message||e(`finance.deleteTransactionFailed`,`Failed to delete transaction`),`error`)}}),ft=q({mutationFn:e=>Z.editTransaction(e.transactionId,e.data),onSuccess:()=>{a.invalidateQueries({queryKey:[`finance`]}),i(e(`finance.transactionEdited`,`Transaction updated and ledger recalculated`)),Se(!1)},onError:t=>{i(t.message||e(`finance.editTransactionFailed`,`Failed to edit transaction`),`error`)}}),pt=q({mutationFn:e=>Z.createManualPrint(e),onSuccess:()=>{a.invalidateQueries({queryKey:[`finance`]}),i(e(`finance.manualPrintCreated`,`Manual print charge added and ledger recalculated`)),Pe(!1),Ie(null),Re(null),Be(``),He(``),We(qGe(new Date))},onError:t=>{i(t.message||e(`finance.manualPrintFailed`,`Failed to create manual print`),`error`)}}),mt=q({mutationFn:e=>Z.depositUserBalance(e.userId,{amount:e.amount,description:e.description,cost_center_id:e.costCenterId??null})}),ht=q({mutationFn:e=>Z.withdrawUserBalance(e.userId,{amount:e.amount,description:e.description,cost_center_id:e.costCenterId??null})}),gt=q({mutationFn:e=>Z.upsertCostCenterMember(e.costCenterId,{user_id:e.userId,can_print:e.canPrint}),onSuccess:()=>{a.invalidateQueries({queryKey:[`finance`]}),i(e(`finance.memberSaved`,`Member saved`))},onError:t=>{i(t.message||e(`finance.memberSaveFailed`,`Failed to save member`),`error`)}}),_t=q({mutationFn:e=>Z.removeCostCenterMember(e.costCenterId,e.userId),onSuccess:()=>{a.invalidateQueries({queryKey:[`finance`]}),i(e(`finance.memberRemoved`,`Member removed`))},onError:t=>{i(t.message||e(`finance.memberRemoveFailed`,`Failed to remove member`),`error`)}}),vt=mt.isPending||ht.isPending,yt=()=>{if(!_.trim()){i(e(`finance.costCenterNameRequired`,`Cost center name is required`),`error`);return}st.mutate()},bt=async()=>{if(pe==null){i(e(`finance.selectCostCenter`,`Please select a cost center`),`error`);return}let t=he.trim();if(!t){i(e(`finance.costCenterNameRequired`,`Cost center name is required`),`error`);return}try{l&&await lt.mutateAsync({costCenterId:pe,name:t}),u&&await ct.mutateAsync({costCenterId:pe,mode:_e,value:ye}),a.invalidateQueries({queryKey:[`finance`]}),i(e(`finance.costCenterUpdated`,`Cost center updated`)),ue(!1)}catch(t){i(t.message||e(`finance.costCenterUpdateFailed`,`Failed to update cost center`),`error`)}},xt=e=>{let t=(rt||[]).find(t=>t.id===e);t&&(me(t.id),ge(t.name),t.budget_mode===`total`?(ve(`total`),be(t.total_budget==null?``:String(t.total_budget))):(ve(`monthly`),be(t.monthly_budget==null?``:String(t.monthly_budget))),ue(!0))},St=async()=>{if(Ge)try{await ut.mutateAsync(Ge.id),a.invalidateQueries({queryKey:[`finance`]}),P===Ge.id&&F(null),i(e(`finance.costCenterDeleted`,`Cost center deleted`))}catch(t){i(t.message||e(`finance.costCenterDeleteFailed`,`Failed to delete cost center`),`error`)}finally{Ke(null)}},Ct=()=>{qe!=null&&dt.mutate(qe,{onSettled:()=>Je(null)})},wt=e=>{we(e.id),Ee(e.user_id),Oe(e.cost_center_id),Ae(String(e.amount)),Me(e.description||``),Se(!0)},Tt=async()=>{if(Ce==null)return;let t=ke?Number.parseFloat(ke):null;if(t!==null&&!Number.isFinite(t)){i(e(`finance.amountInvalid`,`Amount must be a valid number`),`error`);return}ft.mutate({transactionId:Ce,data:{user_id:Te||void 0,cost_center_id:De||void 0,amount:t??void 0,description:je||void 0}})},Et=async()=>{if(Fe==null){i(e(`finance.userRequired`,`Please select a user`),`error`);return}if(Le==null){i(e(`finance.costCenterRequired`,`Please select a cost center`),`error`);return}let t=ze?Number.parseFloat(ze):null;if(t===null||!Number.isFinite(t)){i(e(`finance.amountInvalid`,`Amount must be a valid number`),`error`);return}t=Math.abs(t),pt.mutate({user_id:Fe,cost_center_id:Le,amount:t,description:Ve||void 0,created_at:Ue?new Date(Ue).toISOString():void 0})},Dt=async()=>{if(w==null){i(e(`finance.userRequired`,`Please select a user`),`error`);return}let t=Number.parseFloat(O);if(!Number.isFinite(t)||t<=0){i(e(`finance.amountMustBePositive`,`Amount must be greater than zero`),`error`);return}let n={userId:w,amount:t,description:A.trim()||void 0,costCenterId:M};try{E===`deposit`?await mt.mutateAsync(n):await ht.mutateAsync(n),a.invalidateQueries({queryKey:[`finance`]}),k(``),j(``),i(E===`deposit`?e(`finance.depositSuccess`,`Deposit successful`):e(`finance.withdrawSuccess`,`Withdrawal successful`))}catch(t){i(t.message||e(`finance.adjustmentFailed`,`Wallet adjustment failed`),`error`)}},Ot=()=>{if(P==null){i(e(`finance.selectCostCenter`,`Please select a cost center`),`error`);return}if(I==null){i(e(`finance.noEligibleUsers`,`No eligible users available`),`error`);return}gt.mutate({costCenterId:P,userId:I,canPrint:R})},kt=e=>{P!=null&&_t.mutate({costCenterId:P,userId:e})},At=Pf(Qe?.currency||`USD`),jt=(0,y.useMemo)(()=>[...at||[]].sort((e,t)=>e.username.localeCompare(t.username)),[at]),Mt=(0,y.useMemo)(()=>{let e=new Map;for(let t of jt)e.set(t.id,t.username);return e},[jt]),Nt=(0,y.useMemo)(()=>{let e=new Set((ot?.members||[]).map(e=>e.user_id));return jt.filter(t=>!e.has(t.id))},[jt,ot]),Pt=de===`admin`&&s?tt:$e,Ft=de===`admin`&&s?nt:et,It=(0,y.useMemo)(()=>Pt?.items??[],[Pt?.items]),Lt=Pt?.total??0,Rt=Math.max(1,Math.ceil(Lt/50)),zt=(0,y.useMemo)(()=>It.filter(e=>!(ee!==`all`&&e.transaction_type!==ee||ne!==`all`&&e.cost_center_id!==ne)),[It,ee,ne]),Bt=Math.floor(B/50)+1,Vt=de===`admin`,Ht=t=>t===`deposit`?e(`finance.deposit`):t===`withdraw`?e(`finance.withdraw`):t===`print_charge`?e(`finance.printCharge`):t,Ut=t=>t==null?e(`finance.personal`,`Personal`):Mt.get(t)||(r?.id===t&&r.username?r.username:e(`finance.userWithId`,`User #{{id}}`,{id:t})),Wt=t=>t.budget_limit==null||t.budget_available==null?e(`finance.unlimited`,`Unlimited`):`${At}${t.budget_available.toFixed(2)}/${At}${t.budget_limit.toFixed(2)}`;return h?(0,G.jsxs)(`div`,{className:`p-4 md:p-8 space-y-8`,children:[(0,G.jsxs)(`div`,{className:`flex flex-col gap-4 lg:flex-row lg:items-start lg:justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(qu,{className:`h-6 w-6 text-bambu-green`}),(0,G.jsx)(`h1`,{className:`text-2xl font-bold text-white`,children:e(`finance.title`,`Finance`)})]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-2 max-w-2xl`,children:e(`finance.subtitle`,`Wallet, personal transactions, and cost centers`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1 max-w-2xl`,children:e(`finance.budgetPolicyHint`,`Account balances track costs. Printing is limited only by the selected cost center budget; without a budget, printing is unlimited.`)})]}),(0,G.jsxs)(`div`,{className:`flex flex-col gap-2 lg:items-end`,children:[Ye&&(0,G.jsxs)(`div`,{className:`inline-flex overflow-hidden rounded border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>fe(`personal`),className:`px-3 py-1.5 text-sm ${de===`personal`?`bg-bambu-green text-black font-medium`:`bg-bambu-dark text-bambu-gray`}`,children:e(`finance.personalView`,`Personal view`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>fe(`admin`),className:`px-3 py-1.5 text-sm ${de===`admin`?`bg-bambu-green text-black font-medium`:`bg-bambu-dark text-bambu-gray`}`,children:e(`finance.adminView`,`Admin view`)})]}),de===`admin`&&Ye&&(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-2 lg:justify-end`,children:[c&&(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>ae(!0),children:e(`finance.createCostCenter`,`Create cost center`)}),f&&p&&(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>se(!0),children:e(`finance.adjustWallet`,`Adjust wallet`)}),f&&p&&(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>Pe(!0),children:e(`finance.addManualPrint`,`Add manual print`)}),d&&p&&(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>ce(!0),children:e(`finance.manageMembers`,`Manage cost center members`)})]})]})]}),(0,G.jsxs)(`div`,{className:`grid gap-5 md:grid-cols-2 xl:grid-cols-3`,children:[(0,G.jsxs)(Ld,{children:[(0,G.jsxs)(Rd,{className:`flex flex-row items-center justify-between pb-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e(`finance.currentBalance`,`Personal account balance`)}),(0,G.jsx)(qu,{className:`w-4 h-4 text-bambu-green/90`})]}),(0,G.jsx)(zd,{className:`pt-1`,children:(0,G.jsx)(`p`,{className:`text-3xl font-semibold text-white leading-tight`,children:Ze?e(`common.loading`,`Loading...`):`${At}${(Xe?.balance??0).toFixed(2)}`})})]}),(0,G.jsxs)(Ld,{children:[(0,G.jsxs)(Rd,{className:`flex flex-row items-center justify-between pb-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:de===`admin`?e(`finance.transactions`,`Transactions`):e(`finance.personalTransactions`,`Personal transactions`)}),(0,G.jsx)(As,{className:`w-4 h-4 text-blue-400`})]}),(0,G.jsx)(zd,{className:`pt-1`,children:(0,G.jsx)(`p`,{className:`text-3xl font-semibold text-white leading-tight`,children:Ft?`-`:Lt})})]}),(0,G.jsxs)(Ld,{children:[(0,G.jsxs)(Rd,{className:`flex flex-row items-center justify-between pb-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e(`finance.costCenters`,`Cost centers`)}),(0,G.jsx)(es,{className:`w-4 h-4 text-orange-400`})]}),(0,G.jsx)(zd,{className:`pt-1`,children:(0,G.jsx)(`p`,{className:`text-3xl font-semibold text-white leading-tight`,children:it?`-`:rt?.length??0})})]})]}),ie&&c&&(0,G.jsx)(g5,{title:e(`finance.createCostCenter`,`Create cost center`),size:`md`,onClose:()=>ae(!1),children:(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`grid gap-4 md:grid-cols-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.costCenterName`,`Name`)}),(0,G.jsx)(`input`,{type:`text`,value:_,onChange:e=>v(e.target.value),placeholder:e(`finance.costCenterName`,`Name`),className:f5})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.budgetType`,`Budget type`)}),(0,G.jsxs)(`select`,{value:b,onChange:e=>x(e.target.value),className:f5,children:[(0,G.jsx)(`option`,{value:`monthly`,children:e(`finance.monthlyBudget`,`Monthly budget`)}),(0,G.jsx)(`option`,{value:`total`,children:e(`finance.totalBudget`,`Total budget`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:b===`monthly`?e(`finance.monthlyBudget`,`Monthly budget`):e(`finance.totalBudget`,`Total budget`)}),(0,G.jsx)(`input`,{type:`number`,step:`0.01`,value:S,onChange:e=>C(e.target.value),placeholder:`0.00`,className:f5})]})]}),(0,G.jsx)(Q,{className:`min-w-[180px]`,onClick:yt,disabled:st.isPending,children:st.isPending?e(`common.saving`,`Saving...`):e(`finance.create`,`Create`)})]})}),oe&&f&&p&&(0,G.jsx)(g5,{title:e(`finance.adjustWallet`,`Adjust wallet`),size:`md`,onClose:()=>se(!1),children:(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`grid gap-4 md:grid-cols-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.selectUser`,`Select user`)}),(0,G.jsx)(`select`,{value:w??``,onChange:e=>T(e.target.value?Number(e.target.value):null),className:f5,children:(jt||[]).map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.username},e.id))})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.transactionType`,`Type`)}),(0,G.jsxs)(`select`,{value:E,onChange:e=>D(e.target.value),className:f5,children:[(0,G.jsx)(`option`,{value:`deposit`,children:e(`finance.deposit`,`Deposit`)}),(0,G.jsx)(`option`,{value:`withdraw`,children:e(`finance.withdraw`,`Withdraw`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.amount`,`Amount`)}),(0,G.jsx)(`input`,{type:`number`,step:`0.01`,min:`0`,value:O,onChange:e=>k(e.target.value),placeholder:`0.00`,className:f5})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.costCenters`,`Cost centers`)}),(0,G.jsxs)(`select`,{value:M??``,onChange:e=>N(e.target.value?Number(e.target.value):null),className:f5,children:[(0,G.jsx)(`option`,{value:``,children:e(`finance.noCostCenter`,`No cost center`)}),(rt||[]).map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`common.description`,`Description`)}),(0,G.jsx)(`input`,{type:`text`,value:A,onChange:e=>j(e.target.value),placeholder:e(`finance.descriptionOptional`,`Description (optional)`),className:f5})]}),(0,G.jsx)(Q,{className:`min-w-[180px]`,onClick:Dt,disabled:vt,children:vt?e(`common.saving`,`Saving...`):e(`finance.applyAdjustment`,`Apply adjustment`)})]})}),H&&d&&p&&(0,G.jsx)(g5,{title:e(`finance.manageMembers`,`Manage cost center members`),size:`lg`,onClose:()=>ce(!1),children:(0,G.jsxs)(`div`,{className:`space-y-5`,children:[(0,G.jsxs)(`div`,{className:`grid gap-5 md:grid-cols-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.costCenters`,`Cost centers`)}),(0,G.jsx)(`select`,{value:P??``,onChange:e=>F(e.target.value?Number(e.target.value):null),className:f5,children:(rt||[]).filter(e=>!e.is_private).map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.selectUser`,`Select user`)}),(0,G.jsxs)(`select`,{value:I??``,onChange:e=>L(e.target.value?Number(e.target.value):null),className:f5,children:[(0,G.jsx)(`option`,{value:``,children:e(`finance.selectUser`,`Select user`)}),Nt.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.username},e.id))]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 rounded border border-bambu-dark-tertiary bg-bambu-dark-secondary px-3 py-2`,children:[(0,G.jsx)(`input`,{id:`memberCanPrint`,type:`checkbox`,checked:R,onChange:e=>z(e.target.checked),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsx)(`label`,{htmlFor:`memberCanPrint`,className:`text-sm text-bambu-gray`,children:e(`finance.memberCanPrint`,`Member can print`)})]}),(0,G.jsx)(`div`,{className:`flex items-end`,children:(0,G.jsx)(Q,{className:`min-w-[180px]`,onClick:Ot,disabled:gt.isPending||I==null,children:gt.isPending?e(`common.saving`,`Saving...`):e(`finance.addMember`,`Add member`)})})]}),(0,G.jsx)(`div`,{className:`overflow-auto rounded-lg border border-bambu-dark-tertiary`,children:(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary bg-bambu-dark text-bambu-gray`,children:[(0,G.jsx)(`th`,{className:m5,children:e(`common.name`,`Name`)}),(0,G.jsx)(`th`,{className:m5,children:e(`finance.canPrint`,`Can print`)}),(0,G.jsx)(`th`,{className:m5,children:e(`common.actions`,`Actions`)})]})}),(0,G.jsxs)(`tbody`,{children:[(ot?.members||[]).map(t=>(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/60 text-white`,children:[(0,G.jsx)(`td`,{className:h5,children:jt.find(e=>e.id===t.user_id)?.username||`User ${t.user_id}`}),(0,G.jsx)(`td`,{className:h5,children:t.can_print?e(`common.yes`,`Yes`):e(`common.no`,`No`)}),(0,G.jsx)(`td`,{className:h5,children:(0,G.jsx)(Q,{size:`sm`,variant:`danger`,onClick:()=>kt(t.user_id),disabled:_t.isPending,children:e(`common.remove`,`Remove`)})})]},t.id)),(ot?.members||[]).length===0&&(0,G.jsx)(`tr`,{children:(0,G.jsx)(`td`,{colSpan:3,className:`py-3 text-bambu-gray`,children:e(`finance.noMembers`,`No members assigned.`)})})]})]})})]})}),le&&(l||u)&&(0,G.jsx)(g5,{title:e(`finance.editCostCenter`,`Edit cost center`),size:`md`,onClose:()=>ue(!1),children:(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.costCenterName`,`Name`)}),(0,G.jsx)(`input`,{type:`text`,value:he,onChange:e=>ge(e.target.value),placeholder:e(`finance.costCenterName`,`Name`),className:f5,disabled:!l})]}),(0,G.jsxs)(`div`,{className:`grid gap-4 md:grid-cols-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.budgetType`,`Budget type`)}),(0,G.jsxs)(`select`,{value:_e,onChange:e=>ve(e.target.value),className:f5,disabled:!u,children:[(0,G.jsx)(`option`,{value:`monthly`,children:e(`finance.monthlyBudget`,`Monthly budget`)}),(0,G.jsx)(`option`,{value:`total`,children:e(`finance.totalBudget`,`Total budget`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:_e===`monthly`?e(`finance.monthlyBudget`,`Monthly budget`):e(`finance.totalBudget`,`Total budget`)}),(0,G.jsx)(`input`,{type:`number`,step:`0.01`,value:ye,onChange:e=>be(e.target.value),placeholder:`0.00`,className:f5,disabled:!u})]})]}),(0,G.jsx)(Q,{className:`min-w-[180px]`,onClick:bt,disabled:lt.isPending||ct.isPending||pe==null,children:lt.isPending||ct.isPending?e(`common.saving`,`Saving...`):e(`common.save`,`Save`)})]})}),(0,G.jsxs)(`div`,{className:`grid gap-6 ${g&&o?`xl:grid-cols-2`:``}`,children:[g&&(0,G.jsxs)(Ld,{children:[(0,G.jsxs)(Rd,{children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`finance.myCostCenters`,`My cost centers`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:e(`finance.costCentersHint`,`Review budget limits and keep costs under control`)})]}),(0,G.jsxs)(zd,{className:`space-y-3`,children:[it&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`common.loading`,`Loading...`)}),!it&&(!rt||rt.length===0)&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`finance.noCostCenters`,`No cost centers found.`)}),!it&&rt&&rt.length>0&&(0,G.jsx)(`div`,{className:`overflow-auto rounded-lg border border-bambu-dark-tertiary`,children:(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary bg-bambu-dark text-bambu-gray`,children:[(0,G.jsx)(`th`,{className:m5,children:e(`common.name`,`Name`)}),Vt&&(0,G.jsx)(`th`,{className:m5,children:e(`finance.owner`,`Owner`)}),(0,G.jsx)(`th`,{className:m5,children:e(`finance.balance`,`Account balance`)}),(0,G.jsx)(`th`,{className:m5,children:e(`finance.budget`,`Budget`)}),Vt&&(0,G.jsx)(`th`,{className:m5,children:e(`common.actions`,`Actions`)})]})}),(0,G.jsx)(`tbody`,{children:rt.map(t=>{let n=l||u,r=!t.is_private&&l;return(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/60 text-white`,children:[(0,G.jsx)(`td`,{className:h5,children:t.name}),Vt&&(0,G.jsx)(`td`,{className:h5,children:t.is_private?Ut(t.owner_user_id):e(`finance.shared`,`Shared`)}),(0,G.jsxs)(`td`,{className:h5,children:[At,t.total_balance.toFixed(2)]}),(0,G.jsx)(`td`,{className:h5,children:(0,G.jsxs)(`div`,{className:`flex flex-col gap-0.5`,children:[(0,G.jsx)(`span`,{children:Wt(t)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:t.budget_mode===`monthly`?e(`finance.monthlyBudget`,`Monthly budget`):t.budget_mode===`total`?e(`finance.totalBudget`,`Total budget`):e(`finance.noBudget`,`No budget`)})]})}),Vt&&(0,G.jsx)(`td`,{className:h5,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Q,{size:`sm`,variant:`ghost`,onClick:()=>xt(t.id),disabled:!n,title:n?e(`common.edit`,`Edit`):e(`finance.cannotEditPrivateCostCenter`,`Private cost centers cannot be edited here`),className:`p-1.5 sm:p-2`,children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),r&&(0,G.jsx)(Q,{size:`sm`,variant:`ghost`,onClick:()=>Ke({id:t.id,name:t.name}),disabled:ut.isPending,title:e(`common.delete`,`Delete`),className:`text-red-400 hover:text-red-300 hover:bg-red-500/10 p-1.5 sm:p-2`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})})]},t.id)})})]})})]})]}),o&&(0,G.jsxs)(Ld,{children:[(0,G.jsxs)(Rd,{children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`finance.recentTransactions`,`Recent transactions`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:e(`finance.transactionsHint`,`Filter by type and cost center, then navigate pages`)})]}),(0,G.jsxs)(zd,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`grid gap-4 lg:grid-cols-[minmax(0,1fr)_minmax(0,1fr)_auto] xl:grid-cols-[minmax(0,1fr)_minmax(0,1fr)_minmax(0,1fr)_auto] items-end`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.transactionType`,`Type`)}),(0,G.jsxs)(`select`,{value:ee,onChange:e=>te(e.target.value),className:f5,children:[(0,G.jsx)(`option`,{value:`all`,children:e(`finance.allTypes`)}),(0,G.jsx)(`option`,{value:`deposit`,children:e(`finance.deposit`)}),(0,G.jsx)(`option`,{value:`withdraw`,children:e(`finance.withdraw`)}),(0,G.jsx)(`option`,{value:`print_charge`,children:e(`finance.printCharge`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.costCenters`,`Cost centers`)}),(0,G.jsxs)(`select`,{value:ne,onChange:e=>re(e.target.value===`all`?`all`:Number(e.target.value)),className:f5,children:[(0,G.jsx)(`option`,{value:`all`,children:e(`finance.allCostCenters`)}),(rt||[]).map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]})]}),Ft&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`common.loading`,`Loading...`)}),!Ft&&(!It||It.length===0)&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`finance.noTransactions`,`No transactions available.`)}),!Ft&&It.length>0&&zt.length===0&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`finance.noTransactionsForFilter`,`No transactions match the selected filters.`)}),!Ft&&zt.length>0&&(0,G.jsx)(`div`,{className:`overflow-auto rounded-lg border border-bambu-dark-tertiary`,children:(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary bg-bambu-dark text-bambu-gray`,children:[(0,G.jsx)(`th`,{className:m5,children:e(`common.date`,`Date`)}),Vt&&(0,G.jsx)(`th`,{className:m5,children:e(`common.user`,`User`)}),(0,G.jsx)(`th`,{className:m5,children:e(`finance.costCenter`,`Cost center`)}),(0,G.jsx)(`th`,{className:m5,children:e(`finance.transactionType`,`Type`)}),(0,G.jsx)(`th`,{className:m5,children:e(`common.description`,`Description`)}),(0,G.jsx)(`th`,{className:m5,children:e(`finance.amount`,`Amount`)}),(0,G.jsx)(`th`,{className:m5,children:e(`finance.balanceAfter`,`Balance after`)}),Vt&&(0,G.jsx)(`th`,{className:m5,children:e(`common.actions`,`Actions`)})]})}),(0,G.jsx)(`tbody`,{children:zt.map(n=>{let r=n.amount>=0,i=n.cost_center_id==null?null:(rt||[]).find(e=>e.id===n.cost_center_id),a=Mt.get(n.user_id),o=n.transaction_type===`print_charge`?GGe(n.description??null):null,s=o?.isPartial??!1;return(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/60 text-white`,children:[(0,G.jsx)(`td`,{className:h5,children:KGe(n.created_at,t.language)}),Vt&&(0,G.jsx)(`td`,{className:h5,children:a||e(`finance.userWithId`,`User #{{id}}`,{id:n.user_id})}),(0,G.jsx)(`td`,{className:h5,children:i?.name||`-`}),(0,G.jsx)(`td`,{className:h5,children:(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-2`,children:[(0,G.jsx)(`span`,{children:Ht(n.transaction_type)}),s&&(0,G.jsx)(`span`,{className:`rounded border border-yellow-500/40 bg-yellow-500/10 px-2 py-0.5 text-[11px] text-yellow-300`,children:o&&o.partialType?e(`finance.partialStatus.${o.partialType}`,o.partialType):e(`finance.partial`,`Partial`)})]})}),(0,G.jsx)(`td`,{className:h5,children:(o?.cleanedDescription??n.description)||`-`}),(0,G.jsxs)(`td`,{className:`${h5} ${r?`text-green-400`:`text-red-400`}`,children:[r?`+`:`-`,At,Math.abs(n.amount).toFixed(2)]}),(0,G.jsx)(`td`,{className:h5,children:n.balance_after==null?`-`:`${n.balance_after<0?`-`:``}${At}${Math.abs(n.balance_after).toFixed(2)}`}),Vt&&(0,G.jsx)(`td`,{className:h5,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>wt(n),disabled:ft.isPending,children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{size:`sm`,variant:`danger`,onClick:()=>Je(n.id),disabled:dt.isPending,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})})]},n.id)})})]})}),!Ft&&zt.length>0&&(0,G.jsx)(`div`,{className:`flex justify-end pt-2 lg:pt-0`,children:(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center justify-end gap-2`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>V(0),disabled:B===0||Ft,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,"aria-label":e(`finance.first`,`First`),children:(0,G.jsx)(_s,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>V(e=>Math.max(0,e-50)),disabled:B===0||Ft,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,"aria-label":e(`finance.prev`,`Previous`),children:(0,G.jsx)(hs,{className:`w-4 h-4`})}),(0,G.jsx)(`span`,{className:`text-bambu-gray px-1 whitespace-nowrap`,children:e(`finance.pageNumberOf`,`Page {{page}} of {{total}}`,{page:Bt,total:Rt})}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>V(e=>e+50),disabled:Ft||Bt>=Rt,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,"aria-label":e(`finance.next`,`Next`),children:(0,G.jsx)(ms,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>V(Math.max(0,(Rt-1)*50)),disabled:Ft||Bt>=Rt,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,"aria-label":e(`finance.last`,`Last`),children:(0,G.jsx)(vs,{className:`w-4 h-4`})})]})})]})]}),xe&&Ce!==null&&(0,G.jsx)(g5,{title:e(`finance.editTransaction`,`Edit Transaction`),onClose:()=>Se(!1),size:`md`,children:(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`common.user`,`User`)}),(0,G.jsxs)(`select`,{className:f5,value:Te||``,onChange:e=>Ee(e.target.value?Number(e.target.value):null),children:[(0,G.jsx)(`option`,{value:``,children:e(`finance.selectUser`,`Select user...`)}),jt.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.username},e.id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.costCenter`,`Cost center (optional)`)}),(0,G.jsxs)(`select`,{className:f5,value:De||``,onChange:e=>Oe(e.target.value?Number(e.target.value):null),children:[(0,G.jsx)(`option`,{value:``,children:e(`finance.noCostCenter`,`Personal (no cost center)`)}),(rt||[]).map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.amount`,`Amount`)}),(0,G.jsx)(`input`,{type:`number`,step:`0.01`,className:f5,value:ke,onChange:e=>Ae(e.target.value),placeholder:e(`finance.amountExample`,`e.g., 10.50`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`common.description`,`Description`)}),(0,G.jsx)(`textarea`,{className:`${f5} resize-none`,rows:3,value:je,onChange:e=>Me(e.target.value),placeholder:e(`finance.manualAdjustmentExample`,`e.g., Manual adjustment`)})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 pt-4`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>Se(!1),children:e(`common.cancel`,`Cancel`)}),(0,G.jsx)(Q,{onClick:Tt,disabled:ft.isPending,children:e(`common.save`,`Save`)})]})]})}),Ne&&(0,G.jsx)(g5,{title:e(`finance.addManualPrint`,`Add manual print`),onClose:()=>Pe(!1),size:`md`,children:(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`common.user`,`User`)}),(0,G.jsxs)(`select`,{className:f5,value:Fe||``,onChange:e=>Ie(e.target.value?Number(e.target.value):null),children:[(0,G.jsx)(`option`,{value:``,children:e(`finance.selectUser`,`Select user...`)}),jt.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.username},e.id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.costCenter`,`Cost center`)}),(0,G.jsxs)(`select`,{className:f5,value:Le||``,onChange:e=>Re(e.target.value?Number(e.target.value):null),children:[(0,G.jsx)(`option`,{value:``,children:e(`finance.selectCostCenter`,`Select cost center...`)}),(rt||[]).map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`finance.amount`,`Amount`)}),(0,G.jsx)(`input`,{type:`number`,step:`0.01`,className:f5,value:ze,onChange:e=>Be(e.target.value),placeholder:e(`finance.amountExample`,`e.g., 4.00`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`common.description`,`Description`)}),(0,G.jsx)(`input`,{type:`text`,value:Ve,onChange:e=>He(e.target.value),placeholder:e(`finance.descriptionOptional`,`Description (optional)`),className:f5})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:p5,children:e(`common.date`,`Date`)}),(0,G.jsx)(`input`,{type:`datetime-local`,value:Ue,onChange:e=>We(e.target.value),className:f5})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 pt-4`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>Pe(!1),children:e(`common.cancel`,`Cancel`)}),(0,G.jsx)(Q,{onClick:Et,disabled:pt.isPending,children:pt.isPending?e(`common.saving`,`Saving...`):e(`finance.addManualPrint`,`Add manual print`)})]})]})}),Ge&&(0,G.jsx)(rf,{title:e(`common.delete`,`Delete`),message:e(`finance.confirmDeleteCostCenter`,`Delete cost center "{{name}}"?`,{name:Ge.name}),confirmText:e(`common.delete`,`Delete`),variant:`danger`,isLoading:ut.isPending,onConfirm:St,onCancel:()=>Ke(null)}),qe!=null&&(0,G.jsx)(rf,{title:e(`finance.deleteTransaction`,`Delete transaction`),message:e(`finance.deleteTransactionConfirm`,`Delete this transaction? Balances will be recalculated automatically.`),confirmText:e(`common.delete`,`Delete`),variant:`danger`,isLoading:dt.isPending,onConfirm:Ct,onCancel:()=>Je(null)})]})]}):(0,G.jsxs)(`div`,{className:`p-4 md:p-8 space-y-6`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(qu,{className:`h-6 w-6 text-bambu-green`}),(0,G.jsx)(`h1`,{className:`text-2xl font-bold text-white`,children:e(`finance.title`,`Finance`)})]}),(0,G.jsx)(`div`,{children:(0,G.jsx)(`p`,{className:`text-bambu-gray mt-2 max-w-2xl`,children:e(`finance.subtitle`,`Wallet, personal transactions, and cost centers`)})}),(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`py-8 text-center text-bambu-gray`,children:e(`finance.noAccess`,`You do not have permission to view finance data.`)})})]})}var _5={PLA:`GFL99`,"PLA-CF":`GFL98`,"PLA SILK":`GFL96`,"PLA HIGH SPEED":`GFL95`,PETG:`GFG99`,"PETG HF":`GFG96`,"PETG-CF":`GFG98`,PCTG:`GFG97`,ABS:`GFB99`,ASA:`GFB98`,PC:`GFC99`,PA:`GFN99`,"PA-CF":`GFN98`,NYLON:`GFN99`,TPU:`GFU99`,PVA:`GFS99`,HIPS:`GFS98`,PE:`GFP99`,PP:`GFP97`};function YGe(e){let t=(e||``).toUpperCase().trim();return t&&(_5[t]||_5[t.replace(/[-\s]?CF$/,``)]||_5[t.replace(/\+$/,``)]||_5[t.split(/[-\s]/)[0]])||``}function v5(e){let t=e.replace(/@.+$/,``).trim();return t.startsWith(`# `)?t.slice(2).trim():t}var XGe={local:0,orca_cloud:1,cloud:2,builtin:3};function ZGe(e){let{localPresets:t,orcaProfiles:n,cloudSettings:r,builtinFilaments:i}=e,a=[],o=e=>e.trim().toLowerCase(),s=new Set,c=new Set,l=new Set,u=(e,t,...n)=>{let r=n.filter(e=>!!e);if(r.some(e=>s.has(e)))return!1;let i=`${e}|${o(t)}`;return c.has(i)?!1:(r.forEach(e=>s.add(e)),c.add(i),l.add(o(t)),!0)};for(let e of t??[]){let t=v5(e.name),n=e.filament_type||qU(t).material;u(`local`,t)&&a.push({id:`local_${e.id}`,name:t,source:`local`,filamentId:YGe(n),filamentType:n||``})}for(let e of n??[]){let t=v5(e.name),n=qU(t).material;u(`orca_cloud`,t,e.setting_id)&&a.push({id:`orca_${e.setting_id}`,name:t,source:`orca_cloud`,filamentId:YGe(n),filamentType:n})}for(let e of r??[]){let t=v5(e.name),n=e.setting_id.startsWith(`GFS`)?tW(e.setting_id):``;u(`cloud`,t,e.setting_id,n||void 0)&&a.push({id:e.setting_id,name:t,source:`cloud`,filamentId:n,filamentType:qU(t).material})}for(let e of i??[]){let t=e.filament_id.startsWith(`GF`)?`GFS${e.filament_id.slice(2)}`:e.filament_id;l.has(o(e.name))||u(`builtin`,e.name,e.filament_id,t)&&a.push({id:`builtin_${e.filament_id}`,name:e.name,source:`builtin`,filamentId:e.filament_id,filamentType:qU(e.name).material})}return a.sort((e,t)=>e.source===t.source?e.name.localeCompare(t.name):XGe[e.source]-XGe[t.source])}async function QGe(e,t){if(e.filamentId)return e.filamentId;if(e.source!==`cloud`||!t)return``;try{return(await t(e.id)).filament_id||``}catch{return``}}var $Ge=e=>(Math.trunc(parseFloat(e)*1e3)/1e3).toFixed(3),y5=`HS00`,b5=`HH00`,eKe=e=>{let t=e.match(/^([A-Z]{2}\d{2})/);return t?t[1]:y5},tKe=e=>eKe(e)===b5?`HF`:`S`,nKe=e=>{for(let t of[`High Flow_`,`High Flow `,`Standard_`,`Standard `,`HF_`,`HF `,`S_`,`S `])if(e.startsWith(t))return e.slice(t.length);let t=e.indexOf(`_`);return t>0?e.slice(t+1):e};function x5({profile:e,onEdit:t,onCopy:n,selectionMode:r,isSelected:i,onToggleSelect:a,note:o}){let s=tKe(e.nozzle_id),c=e.nozzle_diameter;return(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[r&&(0,G.jsx)(`button`,{onClick:a,className:`text-bambu-gray hover:text-white transition-colors p-1`,children:i?(0,G.jsx)(_u,{className:`w-4 h-4 text-bambu-green`}):(0,G.jsx)(yu,{className:`w-4 h-4`})}),(0,G.jsxs)(`button`,{onClick:()=>{r&&a?a():t()},className:`flex-1 text-left px-3 py-2 bg-bambu-dark rounded hover:bg-bambu-dark-tertiary transition-colors ${i?`ring-1 ring-bambu-green`:``}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-bambu-green font-mono text-sm font-bold whitespace-nowrap`,children:$Ge(e.k_value)}),(0,G.jsx)(`span`,{className:`text-white text-sm truncate flex-1`,title:e.name,children:e.name||`Unnamed`}),o&&(0,G.jsx)(`span`,{title:`Has note`,children:(0,G.jsx)(Su,{className:`w-3 h-3 text-yellow-500`})}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray whitespace-nowrap`,children:[s,` `,c]})]}),o&&(0,G.jsxs)(`div`,{className:`text-xs mt-0.5 truncate text-yellow-500/70`,title:o,children:[`Note: `,o.length>50?o.substring(0,50)+`...`:o]})]}),!r&&n&&(0,G.jsx)(`button`,{onClick:e=>{e.stopPropagation(),n()},className:`text-bambu-gray hover:text-white transition-colors p-1`,title:`Copy profile`,children:(0,G.jsx)(Vs,{className:`w-4 h-4`})})]})}function S5({profile:e,printerId:t,nozzleDiameter:n,existingProfiles:r=[],builtinFilaments:i=[],filamentPresets:a=[],isDualNozzle:o=!1,supportsFlowType:s=!0,initialNote:c=``,initialNoteKey:l=null,onClose:u,onSave:d,onSaveNote:f,hasPermission:p}){let{t:m}=U(),{showToast:h}=Gd(),[g,_]=(0,y.useState)(e?.name||``),[v,b]=(0,y.useState)(e?.k_value?$Ge(e.k_value):`0.020`),[x,S]=(0,y.useState)(e?.filament_id||``),[C,w]=(0,y.useState)(e?eKe(e.nozzle_id):y5),[T,E]=(0,y.useState)(e?.nozzle_diameter||n),[D,O]=(0,y.useState)(e?[e.extruder_id]:o?[0,1]:[0]),[k,A]=(0,y.useState)(!1),[j,M]=(0,y.useState)({current:0,total:0}),[N,P]=(0,y.useState)(c),[F,I]=(0,y.useState)(``),{schedule:L}=oW(),R=y.useMemo(()=>e?.filament_id?i.find(t=>t.filament_id===e.filament_id)?.name||nKe(r.find(t=>t.filament_id===e.filament_id)?.name||e.name||``)||e.filament_id:``,[e,r,i]),z=y.useMemo(()=>{let e=[[`local`,m(`kProfiles.modal.source.local`)],[`orca_cloud`,m(`kProfiles.modal.source.orcaCloud`)],[`cloud`,m(`kProfiles.modal.source.bambuCloud`)],[`builtin`,m(`kProfiles.modal.source.builtin`)]],t=F.trim().toLowerCase(),n=t?a.filter(e=>e.name.toLowerCase().includes(t)):a;return e.map(([e,t])=>({source:e,label:t,items:n.filter(t=>t.source===e)})).filter(e=>e.items.length>0)},[a,F,m]),B=q({mutationFn:e=>(console.log(`[KProfile] Calling API...`),Z.setKProfile(t,e)),onSuccess:(t,n)=>{if(console.log(`[KProfile] Save success:`,t),h(m(`kProfiles.toast.profileSaved`)),f&&N!==c){let t;t=N===``&&l?l:e&&e.slot_id>0?e.setting_id||`slot_${e.slot_id}_${e.filament_id}_${e.extruder_id}`:`name_${g}_${n.filament_id}`,f(t,N)}A(!0),L(()=>{A(!1),d()},2500)},onError:e=>{console.error(`[KProfile] Save error:`,e),h(e.message,`error`),A(!1)}}),V=q({mutationFn:e=>(console.log(`[KProfile] Deleting profile...`),Z.deleteKProfile(t,e)),onSuccess:e=>{console.log(`[KProfile] Delete success:`,e),h(m(`kProfiles.toast.profileDeleted`)),A(!0),L(()=>{A(!1),u()},4e3)},onError:e=>{console.error(`[KProfile] Delete error:`,e),h(e.message,`error`),A(!1)}}),[ee,te]=(0,y.useState)(!1),ne=()=>{e&&V.mutate({slot_id:e.slot_id,extruder_id:e.extruder_id,nozzle_id:e.nozzle_id,nozzle_diameter:e.nozzle_diameter,filament_id:e.filament_id,setting_id:e.setting_id})};return(0,G.jsxs)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,children:[(0,G.jsxs)(Ld,{className:`w-full max-w-md relative`,children:[k&&(0,G.jsxs)(`div`,{className:`absolute inset-0 bg-bambu-dark-secondary/90 flex flex-col items-center justify-center z-10 rounded-lg`,children:[(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin mb-3`}),(0,G.jsx)(`p`,{className:`text-white font-medium`,children:j.total>1?m(`kProfiles.modal.savingExtruder`,{current:j.current,total:j.total}):m(`kProfiles.modal.syncing`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm mt-1`,children:m(`kProfiles.modal.pleaseWait`)})]}),(0,G.jsxs)(zd,{className:`p-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`h2`,{className:`text-xl font-semibold text-white`,children:m(e?`kProfiles.modal.editTitle`:`kProfiles.modal.addTitle`)}),(0,G.jsx)(`button`,{onClick:u,className:`text-bambu-gray hover:text-white transition-colors`,disabled:k,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`form`,{onSubmit:async n=>{if(n.preventDefault(),o&&!e&&D.length===0){h(m(`kProfiles.toast.selectAtLeastOneExtruder`),`error`);return}let r=parseFloat(v).toFixed(6),i=`${C}-${T}`,s=e&&e.nozzle_id||i,c=e?e.nozzle_diameter:T,l=e?.filament_id||``;if(!e){let e=a.find(e=>e.id===x);if(!e){h(m(`kProfiles.toast.selectFilament`),`error`);return}if(l=await QGe(e,Z.getCloudSettingDetail),!l){h(m(`kProfiles.toast.filamentNotResolvable`,{name:e.name}),`error`);return}}if(e||D.length===1){let t={name:g,k_value:r,filament_id:l,nozzle_id:s,nozzle_diameter:c,extruder_id:e?e.extruder_id:D[0],setting_id:e?.setting_id,slot_id:e?.slot_id??0};console.log(`[KProfile] Saving profile:`,t),B.mutate(t);return}A(!0),M({current:1,total:D.length});let u=D.map(e=>({name:g,k_value:r,filament_id:l,nozzle_id:i,nozzle_diameter:T,extruder_id:e,setting_id:void 0,slot_id:0}));console.log(`[KProfile] Saving ${u.length} profiles in batch:`,u);try{await Z.setKProfilesBatch(t,u),h(m(`kProfiles.toast.profilesSaved`,{count:D.length})),f&&N&&f(`name_${g}_${l}`,N)}catch(e){console.error(`[KProfile] Failed to save batch:`,e),h(m(`kProfiles.toast.failedToSaveBatch`),`error`),A(!1),M({current:0,total:0});return}M({current:D.length,total:D.length}),L(()=>{A(!1),M({current:0,total:0}),d()},3e3)},className:`p-4 space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:m(`kProfiles.modal.profileName`)}),(0,G.jsx)(`input`,{type:`text`,value:g,onChange:e=>_(e.target.value),disabled:!!e,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${e?`opacity-60 cursor-not-allowed`:``}`,placeholder:m(`kProfiles.modal.profileNamePlaceholder`),required:!e})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:m(`kProfiles.modal.kValue`)}),(0,G.jsx)(`input`,{type:`text`,inputMode:`decimal`,value:v,onChange:e=>{let t=e.target.value;(t===``||/^\d*\.?\d*$/.test(t))&&b(t)},onBlur:e=>{let t=parseFloat(e.target.value);isNaN(t)||b((Math.trunc(t*1e3)/1e3).toFixed(3))},className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none font-mono`,placeholder:m(`kProfiles.modal.kValuePlaceholder`),required:!0}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:m(`kProfiles.modal.kValueHelp`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:m(`kProfiles.modal.filament`)}),e?(0,G.jsx)(`div`,{className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white opacity-60`,children:R||e.filament_id}):(0,G.jsxs)(`div`,{className:`border border-bambu-dark-tertiary rounded-lg overflow-hidden`,children:[(0,G.jsxs)(`div`,{className:`relative border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:F,onChange:e=>I(e.target.value),placeholder:m(`kProfiles.modal.searchFilaments`),className:`w-full pl-10 pr-3 py-2 bg-bambu-dark text-white placeholder-bambu-gray focus:outline-none`})]}),(0,G.jsx)(`div`,{className:`max-h-56 overflow-y-auto bg-bambu-dark`,children:z.length===0?(0,G.jsx)(`p`,{className:`px-3 py-3 text-xs text-bambu-gray`,children:a.length===0?m(`kProfiles.modal.noFilamentsHelp`):m(`kProfiles.modal.noFilamentMatches`)}):z.map(e=>(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`sticky top-0 z-10 flex items-center gap-2 px-3 py-1.5 bg-bambu-dark-secondary border-y border-bambu-dark-tertiary`,children:[(0,G.jsx)(`span`,{className:`text-xs font-bold uppercase tracking-wider text-bambu-green`,children:e.label}),(0,G.jsx)(`span`,{className:`text-[10px] text-bambu-gray`,children:e.items.length})]}),e.items.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>{S(e.id),g||_(`${C===b5?`HF`:`S`} ${e.name}`)},className:`w-full text-left px-3 py-1.5 text-sm transition-colors ${x===e.id?`bg-bambu-green/20 text-white`:`text-white hover:bg-bambu-dark-tertiary`}`,children:e.name},e.id))]},e.source))})]})]}),(0,G.jsxs)(`div`,{className:s?`grid grid-cols-2 gap-4`:``,children:[(0,G.jsxs)(`div`,{className:s?``:`hidden`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:m(`kProfiles.modal.flowType`)}),(0,G.jsxs)(`select`,{value:C,onChange:t=>{let n=t.target.value;if(w(n),!e&&x&&!g){let e=a.find(e=>e.id===x);e&&_(`${n===b5?`HF`:`S`} ${e.name}`)}},disabled:!!e,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${e?`opacity-60 cursor-not-allowed`:``}`,children:[(0,G.jsx)(`option`,{value:b5,children:m(`kProfiles.modal.highFlow`)}),(0,G.jsx)(`option`,{value:y5,children:m(`kProfiles.modal.standard`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:m(`kProfiles.modal.nozzleSize`)}),(0,G.jsxs)(`select`,{value:T,onChange:e=>E(e.target.value),disabled:!!e,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${e?`opacity-60 cursor-not-allowed`:``}`,children:[(0,G.jsx)(`option`,{value:`0.2`,children:`0.2mm`}),(0,G.jsx)(`option`,{value:`0.4`,children:`0.4mm`}),(0,G.jsx)(`option`,{value:`0.6`,children:`0.6mm`}),(0,G.jsx)(`option`,{value:`0.8`,children:`0.8mm`})]})]})]}),o&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:m(e?`kProfiles.modal.extruder`:`kProfiles.modal.extruders`)}),e?(0,G.jsx)(`div`,{className:`px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white opacity-60`,children:e.extruder_id===1?m(`kProfiles.modal.left`):m(`kProfiles.modal.right`)}):(0,G.jsxs)(`div`,{className:`flex gap-4`,children:[(0,G.jsxs)(`label`,{className:`flex items-center gap-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:D.includes(1),onChange:e=>{e.target.checked?O([...D,1]):O(D.filter(e=>e!==1))},className:`w-4 h-4 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green focus:ring-offset-0 accent-bambu-green`}),(0,G.jsx)(`span`,{className:`text-white`,children:m(`kProfiles.modal.left`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:D.includes(0),onChange:e=>{e.target.checked?O([...D,0]):O(D.filter(e=>e!==0))},className:`w-4 h-4 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green focus:ring-offset-0 accent-bambu-green`}),(0,G.jsx)(`span`,{className:`text-white`,children:m(`kProfiles.modal.right`)})]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:m(`kProfiles.modal.notes`)}),(0,G.jsx)(`textarea`,{value:N,onChange:e=>P(e.target.value),placeholder:m(`kProfiles.modal.notesPlaceholder`),rows:2,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none resize-none`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:m(`kProfiles.modal.notesHelp`)})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 pt-4`,children:[e&&(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:()=>te(!0),disabled:V.isPending||k||!p(`kprofiles:delete`),title:p(`kprofiles:delete`)?void 0:m(`kProfiles.permission.noDelete`),className:`text-red-500 hover:bg-red-500/10`,children:V.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Nu,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:u,disabled:k,className:`flex-1`,children:m(`common.cancel`)}),(0,G.jsxs)(Q,{type:`submit`,disabled:B.isPending||k||!p(e?`kprofiles:update`:`kprofiles:create`),title:p(e?`kprofiles:update`:`kprofiles:create`)?void 0:m(e?`kProfiles.permission.noUpdate`:`kProfiles.permission.noCreate`),className:`flex-1`,children:[B.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(wc,{className:`w-4 h-4`}),m(`common.save`)]})]})]})]})]}),ee&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-[60]`,children:(0,G.jsx)(Ld,{className:`w-full max-w-sm`,children:(0,G.jsxs)(zd,{className:`p-6`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mb-4`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full bg-red-500/20 flex items-center justify-center`,children:(0,G.jsx)(Nu,{className:`w-5 h-5 text-red-500`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white`,children:m(`kProfiles.deleteConfirm.title`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:m(`kProfiles.deleteConfirm.cannotUndo`)})]})]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mb-6`,children:m(`kProfiles.deleteConfirm.message`,{name:e?.name})}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>te(!1),className:`flex-1`,children:m(`common.cancel`)}),(0,G.jsxs)(Q,{onClick:()=>{te(!1),ne()},disabled:V.isPending,className:`flex-1 bg-red-500 hover:bg-red-600 text-white`,children:[V.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Nu,{className:`w-4 h-4`}),m(`common.delete`)]})]})]})})})]})}var C5={NOZZLE_DIAMETER:`bambusy_kprofiles_nozzle`,SORT_OPTION:`bambusy_kprofiles_sort`};function rKe(){let{t:e}=U(),{showToast:t}=Gd(),{hasPermission:n}=jd(),[r,i]=(0,y.useState)(null),[a,o]=(0,y.useState)(()=>localStorage.getItem(C5.NOZZLE_DIAMETER)||`0.4`),[s,c]=(0,y.useState)(null),[l,u]=(0,y.useState)(!1),[d,f]=(0,y.useState)(null),[p,m]=(0,y.useState)(``),[h,g]=(0,y.useState)(`all`),[_,v]=(0,y.useState)(`all`),[b,x]=(0,y.useState)(()=>localStorage.getItem(C5.SORT_OPTION)||`name`),[S,C]=(0,y.useState)(!1),[w,T]=(0,y.useState)(new Set),[E,D]=(0,y.useState)(!1),[O,k]=(0,y.useState)(!1),A=(0,y.useCallback)(e=>`${e.slot_id}_${e.extruder_id}`,[]);(0,y.useEffect)(()=>{localStorage.setItem(C5.NOZZLE_DIAMETER,a)},[a]),(0,y.useEffect)(()=>{localStorage.setItem(C5.SORT_OPTION,b)},[b]);let{data:j,isLoading:M}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:N,isLoading:P,isFetching:F,error:I,refetch:L}=K({queryKey:[`kprofiles`,r,a],queryFn:async()=>{console.log(`[KProfiles] Fetching profiles for printer`,r,`nozzle`,a);let e=await Z.getKProfiles(r,a);return console.log(`[KProfiles] Received profiles:`,e?.profiles?.length||0,`profiles`),e},enabled:!!r,retry:!1,staleTime:0,gcTime:0,refetchOnMount:`always`}),{data:R}=K({queryKey:[`builtinFilaments`],queryFn:()=>Z.getBuiltinFilaments(),staleTime:3e5}),{data:z}=K({queryKey:[`filamentIdMap`],queryFn:()=>Z.getFilamentIdMap(),staleTime:3e5}),{data:B}=K({queryKey:[`localPresets`],queryFn:()=>Z.getLocalPresets(),retry:!1}),{data:V}=K({queryKey:[`orcaCloudProfilesForKProfiles`],queryFn:()=>Z.orcaCloudListProfiles(),retry:!1}),{data:ee}=K({queryKey:[`cloudSettings`],queryFn:()=>Z.getCloudSettings(),retry:!1}),{data:te,refetch:ne}=K({queryKey:[`kprofile-notes`,r],queryFn:()=>Z.getKProfileNotes(r),enabled:!!r,staleTime:3e4}),re=I?.message?.includes(`not connected`);(0,y.useEffect)(()=>{if(!r&&j&&j.length>0){let e=j.find(e=>e.is_active);e&&i(e.id)}},[r,j]),(0,y.useEffect)(()=>{if(r){let e=setTimeout(()=>{L()},150);return()=>clearTimeout(e)}},[r,a]);let ie=j?.filter(e=>e.is_active)||[],ae=y.useMemo(()=>{let e=new Map;if(R)for(let t of R)e.set(t.filament_id,t.name);if(z)for(let[t,n]of Object.entries(z))e.has(t)||e.set(t,n);return e},[R,z]),oe=y.useMemo(()=>Array.from(ae.entries()).map(([e,t])=>({filament_id:e,name:t})),[ae]),se=y.useMemo(()=>ZGe({localPresets:B?.filament,orcaProfiles:V?.filament,cloudSettings:ee?.filament,builtinFilaments:R}),[B?.filament,V?.filament,ee?.filament,R]),H=y.useCallback(e=>ae.get(e.filament_id)||nKe(e.name),[ae]),ce=y.useMemo(()=>N?.profiles?N.profiles.filter(e=>{let t=p.toLowerCase(),n=!t||e.name.toLowerCase().includes(t)||e.filament_id.toLowerCase().includes(t),r=h===`all`||h===`left`&&e.extruder_id===1||h===`right`&&e.extruder_id===0,i=_===`all`||_===`hf`&&e.nozzle_id.startsWith(`HH`)||_===`s`&&e.nozzle_id.startsWith(`HS`);return n&&r&&i}).sort((e,t)=>{switch(b){case`k_value`:return parseFloat(e.k_value)-parseFloat(t.k_value);case`filament`:return H(e).localeCompare(H(t));default:return e.name.localeCompare(t.name)}}):[],[N?.profiles,p,h,_,b,H]),le=j?.find(e=>e.id===r),ue=le?.nozzle_count===2,de=le?.supports_nozzle_flow_type??!0;(0,y.useEffect)(()=>{de||v(`all`)},[de]),(0,y.useEffect)(()=>{let e=e=>{e.target instanceof HTMLInputElement||e.target instanceof HTMLTextAreaElement||e.target instanceof HTMLSelectElement||s||l||d||(e.key===`r`||e.key===`R`?(e.preventDefault(),L()):e.key===`n`||e.key===`N`?(e.preventDefault(),u(!0)):e.key===`Escape`&&S&&(e.preventDefault(),C(!1),T(new Set)))};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[s,l,d,S,L]);let fe=(0,y.useCallback)(()=>{if(!N?.profiles||N.profiles.length===0){t(e(`kProfiles.toast.noProfilesToExport`),`error`);return}let n={version:1,exported_at:new Date().toISOString(),printer:le?.name||`Unknown`,nozzle_diameter:a,profiles:N.profiles.map(e=>({name:e.name,k_value:e.k_value,filament_id:e.filament_id,nozzle_id:e.nozzle_id,nozzle_diameter:e.nozzle_diameter,extruder_id:e.extruder_id}))},r=new Blob([JSON.stringify(n,null,2)],{type:`application/json`}),i=URL.createObjectURL(r),o=document.createElement(`a`);o.href=i,o.download=`kprofiles_${le?.name||`printer`}_${a}mm_${new Date().toISOString().split(`T`)[0]}.json`,document.body.appendChild(o),o.click(),document.body.removeChild(o),URL.revokeObjectURL(i),t(e(`kProfiles.toast.exportedProfiles`,{count:N.profiles.length}))},[N?.profiles,le,a,t,e]),pe=(0,y.useCallback)(()=>{let n=document.createElement(`input`);n.type=`file`,n.accept=`.json`,n.onchange=async n=>{let i=n.target.files?.[0];if(i)try{let n=await i.text(),o=JSON.parse(n);if(!o.profiles||!Array.isArray(o.profiles)){t(e(`kProfiles.toast.invalidFileFormat`),`error`);return}let s=0;for(let e of o.profiles)if(!(!e.name||!e.k_value||!e.filament_id))try{await Z.setKProfile(r,{name:e.name,k_value:parseFloat(e.k_value).toFixed(6),filament_id:e.filament_id,nozzle_id:e.nozzle_id||`${y5}-${a}`,nozzle_diameter:e.nozzle_diameter||a,extruder_id:e.extruder_id??0,slot_id:0}),s++,await new Promise(e=>setTimeout(e,500))}catch(t){console.error(`Failed to import profile:`,e.name,t)}t(e(`kProfiles.toast.importedProfiles`,{count:s,total:o.profiles.length})),L()}catch(n){console.error(`Import error:`,n),t(e(`kProfiles.toast.failedToParseImport`),`error`)}},n.click()},[r,a,t,L,e]),me=(0,y.useCallback)(e=>{T(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},[]),he=(0,y.useCallback)(()=>{T(new Set(ce.map(e=>A(e))))},[ce,A]),ge=(0,y.useCallback)(()=>{w.size!==0&&D(!0)},[w.size]),_e=(0,y.useCallback)(async()=>{let n=ce.filter(e=>w.has(A(e)));k(!0);let i=0;for(let e of n)try{await Z.deleteKProfile(r,{slot_id:e.slot_id,extruder_id:e.extruder_id,nozzle_id:e.nozzle_id,nozzle_diameter:e.nozzle_diameter,filament_id:e.filament_id,setting_id:e.setting_id}),i++,await new Promise(e=>setTimeout(e,300))}catch(t){console.error(`Failed to delete profile:`,e.name,t)}t(e(`kProfiles.toast.profilesDeleted`,{count:i})),k(!1),D(!1),C(!1),T(new Set),L()},[r,w,ce,t,L,A,e]),ve=(0,y.useCallback)(e=>{let t=[];return e.setting_id&&t.push(e.setting_id),t.push(`slot_${e.slot_id}_${e.filament_id}_${e.extruder_id}`),t.push(`name_${e.name}_${e.filament_id}`),t},[]),ye=(0,y.useCallback)(async(n,i)=>{if(r)try{await Z.setKProfileNote(r,n,i),ne()}catch(n){console.error(`Failed to save note:`,n),t(e(`kProfiles.toast.failedToSaveNote`),`error`)}},[r,ne,t,e]),be=(0,y.useCallback)(e=>{if(!te?.notes)return{note:``,key:null};let t=ve(e);for(let e of t)if(te.notes[e])return{note:te.notes[e],key:e};return{note:``,key:null}},[te,ve]),xe=(0,y.useCallback)(e=>be(e).note,[be]);return M?(0,G.jsx)(`div`,{className:`flex justify-center py-12`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):!j||j.length===0?(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`py-12 text-center`,children:[(0,G.jsx)(ys,{className:`w-12 h-12 text-bambu-gray mx-auto mb-4`}),(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white mb-2`,children:e(`kProfiles.noPrintersConfigured`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`kProfiles.addPrinterInSettings`)})]})}):ie.length===0?(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`py-12 text-center`,children:[(0,G.jsx)(Ll,{className:`w-12 h-12 text-bambu-gray mx-auto mb-4`}),(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white mb-2`,children:e(`kProfiles.noActivePrinters`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`kProfiles.enablePrinterConnection`)})]})}):(0,G.jsxs)(G.Fragment,{children:[F&&!P&&(0,G.jsxs)(`div`,{className:`fixed inset-0 bg-black/50 flex flex-col items-center justify-center z-40`,children:[(0,G.jsx)(Y,{className:`w-10 h-10 text-bambu-green animate-spin mb-3`}),(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`kProfiles.loadingProfiles`)})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-4 mb-6`,children:[(0,G.jsxs)(`div`,{className:`flex-1 min-w-48`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:e(`kProfiles.printer`)}),(0,G.jsx)(`select`,{value:r||``,onChange:e=>i(parseInt(e.target.value)),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:ie.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))})]}),(0,G.jsxs)(`div`,{className:`w-32`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:e(`kProfiles.nozzle`)}),(0,G.jsxs)(`select`,{value:a,onChange:e=>o(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`0.2`,children:`0.2mm`}),(0,G.jsx)(`option`,{value:`0.4`,children:`0.4mm`}),(0,G.jsx)(`option`,{value:`0.6`,children:`0.6mm`}),(0,G.jsx)(`option`,{value:`0.8`,children:`0.8mm`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-end gap-2`,children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>L(),disabled:F||!n(`kprofiles:read`),title:n(`kprofiles:read`)?void 0:e(`kProfiles.permission.noRead`),children:[(0,G.jsx)(Vl,{className:`w-4 h-4 ${F?`animate-spin`:``}`}),e(`kProfiles.refresh`)]}),(0,G.jsxs)(Q,{onClick:()=>u(!0),disabled:!n(`kprofiles:create`),title:n(`kprofiles:create`)?void 0:e(`kProfiles.permission.noCreate`),children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),e(`kProfiles.addProfile`)]})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-4 mb-4`,children:[(0,G.jsxs)(`div`,{className:`flex-1 min-w-48 relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:p,onChange:e=>m(e.target.value),placeholder:e(`kProfiles.searchPlaceholder`),className:`w-full pl-10 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`})]}),ue&&(0,G.jsx)(`div`,{className:`w-36`,children:(0,G.jsxs)(`select`,{value:h,onChange:e=>g(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`all`,children:e(`kProfiles.allExtruders`)}),(0,G.jsx)(`option`,{value:`left`,children:e(`kProfiles.leftOnly`)}),(0,G.jsx)(`option`,{value:`right`,children:e(`kProfiles.rightOnly`)})]})}),de&&(0,G.jsx)(`div`,{className:`w-32`,children:(0,G.jsxs)(`select`,{value:_,onChange:e=>v(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`all`,children:e(`kProfiles.allFlow`)}),(0,G.jsx)(`option`,{value:`hf`,children:e(`kProfiles.hfOnly`)}),(0,G.jsx)(`option`,{value:`s`,children:e(`kProfiles.sOnly`)})]})}),(0,G.jsx)(`div`,{className:`w-32`,children:(0,G.jsxs)(`select`,{value:b,onChange:e=>x(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`name`,children:e(`kProfiles.sortName`)}),(0,G.jsx)(`option`,{value:`k_value`,children:e(`kProfiles.sortKValue`)}),(0,G.jsx)(`option`,{value:`filament`,children:e(`kProfiles.sortFilament`)})]})})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-2 mb-6`,children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:fe,disabled:!N?.profiles?.length||!n(`kprofiles:read`),title:n(`kprofiles:read`)?void 0:e(`kProfiles.permission.noExport`),children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),e(`kProfiles.export`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:pe,disabled:!n(`kprofiles:create`),title:n(`kprofiles:create`)?void 0:e(`kProfiles.permission.noImport`),children:[(0,G.jsx)(Bu,{className:`w-4 h-4`}),e(`kProfiles.import`)]}),(0,G.jsx)(`div`,{className:`flex-1`}),S?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:he,children:[(0,G.jsx)(_u,{className:`w-4 h-4`}),e(`kProfiles.selectAll`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:ge,disabled:w.size===0||!n(`kprofiles:delete`),className:`text-red-500 hover:bg-red-500/10`,title:n(`kprofiles:delete`)?void 0:e(`kProfiles.permission.noDelete`),children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),e(`kProfiles.delete`),` (`,w.size,`)`]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>{C(!1),T(new Set)},children:[(0,G.jsx)(td,{className:`w-4 h-4`}),e(`common.cancel`)]})]}):(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>C(!0),disabled:!ce.length||!n(`kprofiles:delete`),title:n(`kprofiles:delete`)?void 0:e(`kProfiles.permission.noDelete`),children:[(0,G.jsx)(_u,{className:`w-4 h-4`}),e(`kProfiles.select`)]})]}),P?(0,G.jsx)(`div`,{className:`flex justify-center py-12`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):re?(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`py-12 text-center`,children:[(0,G.jsx)(Xu,{className:`w-12 h-12 text-bambu-gray mx-auto mb-4`}),(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white mb-2`,children:e(`kProfiles.printerOffline`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray mb-4`,children:e(`kProfiles.printerOfflineDesc`)}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>L(),children:[(0,G.jsx)(Vl,{className:`w-4 h-4`}),e(`common.refresh`)]})]})}):ce.length>0?ue?(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-bambu-gray mb-2 px-1`,children:e(`kProfiles.leftExtruder`)}),(0,G.jsx)(`div`,{className:`space-y-1`,children:ce.filter(e=>e.extruder_id===1).map(e=>(0,G.jsx)(x5,{profile:e,onEdit:()=>c(e),onCopy:()=>f(e),selectionMode:S,isSelected:w.has(A(e)),onToggleSelect:()=>me(A(e)),note:xe(e)},A(e)))})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-bambu-gray mb-2 px-1`,children:e(`kProfiles.rightExtruder`)}),(0,G.jsx)(`div`,{className:`space-y-1`,children:ce.filter(e=>e.extruder_id===0).map(e=>(0,G.jsx)(x5,{profile:e,onEdit:()=>c(e),onCopy:()=>f(e),selectionMode:S,isSelected:w.has(A(e)),onToggleSelect:()=>me(A(e)),note:xe(e)},A(e)))})]})]}):(0,G.jsx)(`div`,{className:`space-y-1`,children:ce.map(e=>(0,G.jsx)(x5,{profile:e,onEdit:()=>c(e),onCopy:()=>f(e),selectionMode:S,isSelected:w.has(A(e)),onToggleSelect:()=>me(A(e)),note:xe(e)},A(e)))}):p||h!==`all`||_!==`all`?(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`py-12 text-center`,children:[(0,G.jsx)(Zl,{className:`w-12 h-12 text-bambu-gray mx-auto mb-4`}),(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white mb-2`,children:e(`kProfiles.noMatchingProfiles`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`kProfiles.noMatchingProfilesDesc`)})]})}):(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`py-12 text-center`,children:[(0,G.jsx)(wc,{className:`w-12 h-12 text-bambu-gray mx-auto mb-4`}),(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white mb-2`,children:e(`kProfiles.noKProfiles`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray mb-4`,children:e(`kProfiles.noKProfilesDesc`,{diameter:a})}),(0,G.jsxs)(Q,{onClick:()=>u(!0),children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),e(`kProfiles.createFirstProfile`)]})]})}),s&&r&&(()=>{let{note:e,key:t}=be(s);return(0,G.jsx)(S5,{profile:s,printerId:r,nozzleDiameter:a,existingProfiles:N?.profiles,builtinFilaments:oe,filamentPresets:se,isDualNozzle:ue,supportsFlowType:de,initialNote:e,initialNoteKey:t,onSaveNote:ye,hasPermission:n,onClose:()=>{console.log(`[KProfiles] Edit modal onClose - refetching profiles...`),c(null),L()},onSave:()=>{c(null),L()}})})(),l&&r&&(0,G.jsx)(S5,{printerId:r,nozzleDiameter:a,existingProfiles:N?.profiles,builtinFilaments:oe,filamentPresets:se,isDualNozzle:ue,supportsFlowType:de,onSaveNote:ye,hasPermission:n,onClose:()=>{u(!1),L()},onSave:()=>{u(!1),L()}}),d&&r&&(0,G.jsx)(S5,{printerId:r,nozzleDiameter:a,existingProfiles:N?.profiles,builtinFilaments:oe,filamentPresets:se,isDualNozzle:ue,supportsFlowType:de,onSaveNote:ye,hasPermission:n,profile:{...d,slot_id:0,name:`${d.name} (Copy)`},onClose:()=>{f(null),L()},onSave:()=>{f(null),L()}}),E&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,children:(0,G.jsx)(Ld,{className:`w-full max-w-sm`,children:(0,G.jsxs)(zd,{className:`p-6`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mb-4`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full bg-red-500/20 flex items-center justify-center`,children:(0,G.jsx)(Nu,{className:`w-5 h-5 text-red-500`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white`,children:e(`kProfiles.bulkDelete.title`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`kProfiles.bulkDelete.cannotUndo`)})]})]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mb-6`,children:e(`kProfiles.bulkDelete.message`,{count:w.size})}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>D(!1),disabled:O,className:`flex-1`,children:e(`common.cancel`)}),(0,G.jsxs)(Q,{onClick:_e,disabled:O,className:`flex-1 bg-red-500 hover:bg-red-600 text-white`,children:[O?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Nu,{className:`w-4 h-4`}),e(`common.delete`)]})]})]})})})]})}var iKe=[`PLA`,`PETG`,`PCTG`,`ABS`,`ASA`,`TPU`,`PC`,`PA`,`PVA`,`HIPS`,`PP`,`PET`,`NYLON`],aKe={PLA:`E8E8E8`,PETG:`4A90D9`,ABS:`E67E22`,ASA:`D35400`,TPU:`9B59B6`,PC:`BDC3C7`,PA:`2ECC71`,NYLON:`2ECC71`,PVA:`F1C40F`,HIPS:`95A5A6`,PP:`ECF0F1`,PET:`3498DB`};function oKe(e){let t=e.toUpperCase();for(let e of iKe)if(RegExp(`\\b${e}\\b`).test(t))return e;return null}function sKe(e){let t=e.replace(/@.+$/,``).trim(),n=t.toUpperCase();for(let e of iKe){let r=n.indexOf(e);if(r>0){let e=t.slice(0,r).trim();if(e&&e.length>1)return e}}return null}function w5({preset:e,onDelete:t,onExpand:n,isExpanded:r}){let{t:i}=U(),{hasPermission:a}=jd(),o=e.filament_type||oKe(e.name),s=e.filament_vendor||sKe(e.name),c=null,l=!1;if(e.default_filament_colour)try{let t=JSON.parse(e.default_filament_colour),n=Array.isArray(t)?t[0]:t;typeof n==`string`&&/^#?[0-9a-fA-F]{6,8}$/.test(n.replace(`#`,``))&&(c=n.replace(`#`,``).slice(0,6),l=!0)}catch{let t=e.default_filament_colour;/^#?[0-9a-fA-F]{6,8}$/.test(t.replace(`#`,``))&&(c=t.replace(`#`,``).slice(0,6),l=!0)}return!c&&o&&(c=aKe[o.toUpperCase()]||null),(0,G.jsx)(Ld,{className:`bg-bambu-dark border-bambu-dark-tertiary hover:border-bambu-dark-tertiary/80 transition-colors`,children:(0,G.jsxs)(zd,{className:`p-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1`,children:[e.preset_type===`filament`&&(0,G.jsx)(`div`,{className:`w-4 h-4 rounded-full border border-black/20 flex-shrink-0 ${!l&&!c?`opacity-25`:l?``:`opacity-50`}`,style:{backgroundColor:c?`#${c}`:`#666`}}),(0,G.jsx)(`span`,{className:`text-sm font-medium text-white truncate`,children:e.name})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-wrap`,children:[o&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-bambu-green/20 text-bambu-green`,children:o}),s&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:s}),(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`,children:i(`profiles.localProfiles.badge`)})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 flex-shrink-0`,children:[a(`settings:update`)&&(0,G.jsx)(`button`,{onClick:()=>t(e.id),className:`p-1 text-bambu-gray hover:text-red-600 dark:hover:text-red-400 transition-colors`,title:i(`profiles.localProfiles.delete`),children:(0,G.jsx)(Nu,{className:`w-3.5 h-3.5`})}),(0,G.jsx)(`button`,{onClick:()=>n(r?null:e.id),className:`p-1 text-bambu-gray hover:text-white transition-colors`,children:r?(0,G.jsx)(gs,{className:`w-3.5 h-3.5`}):(0,G.jsx)(ps,{className:`w-3.5 h-3.5`})})]})]}),r&&(0,G.jsxs)(`div`,{className:`mt-3 pt-3 border-t border-bambu-dark-tertiary text-xs space-y-1.5`,children:[o&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`profiles.localProfiles.filamentType`)}),(0,G.jsx)(`span`,{className:`text-white`,children:o})]}),s&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`profiles.localProfiles.vendor`)}),(0,G.jsx)(`span`,{className:`text-white`,children:s})]}),e.nozzle_temp_min!=null&&e.nozzle_temp_max!=null&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`profiles.localProfiles.nozzleTemp`)}),(0,G.jsxs)(`span`,{className:`text-white`,children:[e.nozzle_temp_min,`–`,e.nozzle_temp_max,`°C`]})]}),e.filament_cost&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`profiles.localProfiles.cost`)}),(0,G.jsx)(`span`,{className:`text-white`,children:e.filament_cost})]}),e.filament_density&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`profiles.localProfiles.density`)}),(0,G.jsxs)(`span`,{className:`text-white`,children:[e.filament_density,` g/cm³`]})]}),e.pressure_advance&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`profiles.localProfiles.pressureAdvance`)}),(0,G.jsx)(`span`,{className:`text-white`,children:e.pressure_advance})]}),e.compatible_printers&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`profiles.localProfiles.compatiblePrinters`)}),(0,G.jsx)(`span`,{className:`text-white truncate ml-2`,children:(()=>{try{return JSON.parse(e.compatible_printers).join(`, `)}catch{return e.compatible_printers}})()})]}),e.inherits&&e.inherits!==e.name&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`profiles.localProfiles.inheritsFrom`)}),(0,G.jsx)(`span`,{className:`text-white truncate ml-2`,children:e.inherits})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:i(`profiles.localProfiles.source`)}),(0,G.jsx)(`span`,{className:`text-white capitalize`,children:e.source})]})]})]})})}function cKe(){let{t:e}=U(),{hasPermission:t}=jd(),n=co(),{showToast:r}=Gd(),[i,a]=(0,y.useState)(``),[o,s]=(0,y.useState)(null),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(null),{data:f,isLoading:p}=K({queryKey:[`localPresets`],queryFn:()=>Z.getLocalPresets()}),m=q({mutationFn:async e=>{let t=[];for(let n of Array.from(e)){let e=new FormData;e.append(`file`,n),t.push(await Z.importLocalPresets(e))}return t},onSuccess:t=>{n.invalidateQueries({queryKey:[`localPresets`]}),n.invalidateQueries({queryKey:[`slicerPresets`]});let i=0,a=0,o=0;for(let e of t)i+=e.imported,a+=e.skipped,o+=e.errors.length;i>0&&r(e(`profiles.localProfiles.toast.importSuccess`,{count:i})),a>0&&r(e(`profiles.localProfiles.toast.importSkipped`,{count:a}),`warning`),o>0&&r(e(`profiles.localProfiles.toast.importError`,{count:o}),`error`)},onError:e=>{r(e.message,`error`)}}),h=q({mutationFn:e=>Z.deleteLocalPreset(e),onSuccess:(t,i)=>{n.setQueryData([`localPresets`],e=>e&&{filament:e.filament.filter(e=>e.id!==i),printer:e.printer.filter(e=>e.id!==i),process:e.process.filter(e=>e.id!==i)}),n.invalidateQueries({queryKey:[`localPresets`]}),n.invalidateQueries({queryKey:[`slicerPresets`]}),d(null),r(e(`profiles.localProfiles.toast.deleted`))}}),g=(0,y.useCallback)(e=>{!e||e.length===0||m.mutate(e)},[m]),_=(0,y.useCallback)(e=>{e.preventDefault(),l(!1),g(e.dataTransfer.files)},[g]),v=(0,y.useCallback)(e=>{if(!i)return e;let t=i.toLowerCase();return e.filter(e=>e.name.toLowerCase().includes(t)||e.filament_type?.toLowerCase().includes(t)||e.filament_vendor?.toLowerCase().includes(t))},[i]),b=(0,y.useMemo)(()=>v(f?.filament||[]),[f?.filament,v]),x=(0,y.useMemo)(()=>v(f?.printer||[]),[f?.printer,v]),S=(0,y.useMemo)(()=>v(f?.process||[]),[f?.process,v]),C=b.length+x.length+S.length,w=(f?.filament?.length??0)+(f?.printer?.length??0)+(f?.process?.length??0)>0;return p?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-16`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):(0,G.jsxs)(`div`,{className:`space-y-6`,children:[t(`settings:update`)&&(0,G.jsxs)(`div`,{onDragOver:e=>{e.preventDefault(),l(!0)},onDragLeave:()=>l(!1),onDrop:_,className:`relative border-2 border-dashed rounded-lg p-6 text-center transition-colors ${c?`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:[(0,G.jsx)(`input`,{type:`file`,accept:`.json,.zip,.orca_filament,.bbscfg,.bbsflmt`,multiple:!0,className:`absolute inset-0 w-full h-full opacity-0 cursor-pointer`,onChange:e=>g(e.target.files)}),m.isPending?(0,G.jsxs)(`div`,{className:`flex items-center justify-center gap-2`,children:[(0,G.jsx)(Y,{className:`w-5 h-5 text-bambu-green animate-spin`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:e(`profiles.localProfiles.importing`)})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Bu,{className:`w-8 h-8 text-bambu-gray mx-auto mb-2`}),(0,G.jsx)(`p`,{className:`text-sm text-white font-medium`,children:e(`profiles.localProfiles.import`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e(`profiles.localProfiles.importDesc`)})]})]}),w&&(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:i,onChange:e=>a(e.target.value),placeholder:e(`profiles.localProfiles.search`),className:`w-full pl-9 pr-4 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`})]}),!w&&!p&&(0,G.jsxs)(`div`,{className:`text-center py-12`,children:[(0,G.jsx)(Nc,{className:`w-12 h-12 text-bambu-gray mx-auto mb-3 opacity-50`}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`profiles.localProfiles.noPresets`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/60 mt-1`,children:e(`profiles.localProfiles.importDesc`)})]}),w&&C===0&&!p&&(0,G.jsxs)(`div`,{className:`text-center py-12`,children:[(0,G.jsx)(Zl,{className:`w-12 h-12 text-bambu-gray mx-auto mb-3 opacity-50`}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`profiles.localProfiles.noSearchResults`)})]}),C>0&&(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 lg:grid-cols-3 gap-6`,children:[b.length>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3`,children:[(0,G.jsx)(Xs,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white`,children:e(`profiles.localProfiles.filament`)}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[`(`,b.length,`)`]})]}),(0,G.jsx)(`div`,{className:`space-y-2`,children:b.map(e=>(0,G.jsx)(w5,{preset:e,onDelete:e=>d(e),onExpand:s,isExpanded:o===e.id},e.id))})]}),S.length>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3`,children:[(0,G.jsx)(qc,{className:`w-4 h-4 text-blue-600 dark:text-blue-400`}),(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white`,children:e(`profiles.localProfiles.process`)}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[`(`,S.length,`)`]})]}),(0,G.jsx)(`div`,{className:`space-y-2`,children:S.map(e=>(0,G.jsx)(w5,{preset:e,onDelete:e=>d(e),onExpand:s,isExpanded:o===e.id},e.id))})]}),x.length>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3`,children:[(0,G.jsx)(tu,{className:`w-4 h-4 text-orange-600 dark:text-orange-400`}),(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white`,children:e(`profiles.localProfiles.printer`)}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[`(`,x.length,`)`]})]}),(0,G.jsx)(`div`,{className:`space-y-2`,children:x.map(e=>(0,G.jsx)(w5,{preset:e,onDelete:e=>d(e),onExpand:s,isExpanded:o===e.id},e.id))})]})]}),u!==null&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg p-6 max-w-sm mx-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3`,children:[(0,G.jsx)(ys,{className:`w-5 h-5 text-red-600 dark:text-red-400`}),(0,G.jsx)(`h3`,{className:`text-white font-medium`,children:e(`profiles.localProfiles.deleteConfirmTitle`)})]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4`,children:e(`profiles.localProfiles.deleteConfirm`)}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>d(null),children:e(`profiles.localProfiles.cancel`)}),(0,G.jsxs)(Q,{variant:`danger`,size:`sm`,onClick:()=>h.mutate(u),disabled:h.isPending,children:[h.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Nu,{className:`w-4 h-4`}),e(`profiles.localProfiles.delete`)]})]})]})})]})}function lKe(e){let t=e.match(/@?\s*(?:BBL\s+)?(?:Bambu\s+Lab\s+)?([XPAH][1-9][A-Z]?(?:\s*(?:Carbon|mini))?|H2D)/i),n=e.match(/(\d+\.?\d*)\s*(?:mm\s*)?nozzle|nozzle\s*(\d+\.?\d*)/i),r=e.match(/(\d+\.?\d*)mm\s*(?:Standard|Fine|Extra Fine|Draft|Quality)?/i),i=e.match(/\b(PLA|PETG|ABS|ASA|TPU|PC|PA|PVA|HIPS|PP|PET(?:-?CF)?|PA(?:-?CF)?|PLA(?:-?CF)?)\b/i);return{printer:t?t[1].trim():null,nozzle:n?(n[1]||n[2])+`mm`:null,layerHeight:r?r[1]+`mm`:null,filamentType:i?i[1].toUpperCase():null}}function uKe({settings:e,lastSyncTime:t,onRefresh:n,isRefreshing:r,printers:i,t:a}){let[o,s]=(0,y.useState)(``),[c,l]=(0,y.useState)(`all`),[u,d]=(0,y.useState)(`all`),[f,p]=(0,y.useState)(`all`),[m,h]=(0,y.useState)(`all`),[g,_]=(0,y.useState)(`all`),[v,b]=(0,y.useState)(null),x=(0,y.useMemo)(()=>[...e.filament.map(e=>({...e,type:`filament`})),...e.printer.map(e=>({...e,type:`printer`})),...e.process.map(e=>({...e,type:`process`}))].map(e=>({...e,meta:lKe(e.name)})),[e]),S=(0,y.useMemo)(()=>{let e=new Set,t=new Set,n=new Set;return x.forEach(r=>{r.meta.nozzle&&e.add(r.meta.nozzle),r.meta.filamentType&&t.add(r.meta.filamentType),r.meta.layerHeight&&n.add(r.meta.layerHeight)}),{printers:i.map(e=>({id:e.id.toString(),name:e.name})),nozzles:Array.from(e).sort((e,t)=>parseFloat(e)-parseFloat(t)),filaments:Array.from(t).sort(),layerHeights:Array.from(n).sort((e,t)=>parseFloat(e)-parseFloat(t))}},[x,i]),C=(0,y.useMemo)(()=>u===`all`?null:i.find(e=>e.id.toString()===u)?.model||null,[u,i]),w=(0,y.useMemo)(()=>x.filter(e=>c===`all`||e.type===c).filter(e=>{if(u===`all`||!C)return!0;let t=e.meta.printer?.toLowerCase()||``,n=C.toLowerCase();return t.includes(n)||n.includes(t)}).filter(e=>f===`all`||e.meta.nozzle===f).filter(e=>m===`all`||e.meta.filamentType===m).filter(e=>g===`all`||e.meta.layerHeight===g).filter(e=>o===``||e.name.toLowerCase().includes(o.toLowerCase())).sort((e,t)=>e.name.localeCompare(t.name)),[x,c,u,C,f,m,g,o]),T=()=>{l(`all`),d(`all`),p(`all`),h(`all`),_(`all`),s(``)},E=c!==`all`||u!==`all`||f!==`all`||m!==`all`||g!==`all`||o!==``,D=e.filament.length+e.printer.length+e.process.length,O=e=>w.filter(t=>t.type===e);return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`space-y-4 mb-6`,children:[(0,G.jsxs)(`div`,{className:`flex flex-col sm:flex-row gap-3`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:o,onChange:e=>s(e.target.value),placeholder:a(`profiles.cloudView.searchPlaceholder`),className:`w-full pl-10 pr-4 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray-dark focus:border-bambu-green focus:outline-none`})]}),(0,G.jsx)(`div`,{className:`flex gap-2`,children:(0,G.jsxs)(Q,{variant:`secondary`,onClick:n,disabled:r,children:[(0,G.jsx)(Vl,{className:`w-4 h-4 ${r?`animate-spin`:``}`}),a(`profiles.cloudView.refresh`)]})})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2`,children:[(0,G.jsx)(Cc,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(O5,{label:a(`profiles.cloudView.filters.type`),value:c,options:[{value:`all`,label:a(`profiles.cloudView.filters.all`),count:D},{value:`filament`,label:a(`profiles.cloudView.filters.filament`),count:e.filament.length},{value:`printer`,label:a(`profiles.cloudView.filters.printer`),count:e.printer.length},{value:`process`,label:a(`profiles.cloudView.filters.process`),count:e.process.length}],onChange:e=>l(e)}),S.printers.length>0&&(0,G.jsx)(O5,{label:a(`profiles.cloudView.filters.printer`),value:u,options:[{value:`all`,label:a(`profiles.cloudView.filters.all`)},...S.printers.map(e=>({value:e.id,label:e.name}))],onChange:d}),S.nozzles.length>0&&(0,G.jsx)(O5,{label:a(`profiles.cloudView.filters.nozzle`),value:f,options:[{value:`all`,label:a(`profiles.cloudView.filters.all`)},...S.nozzles.map(e=>({value:e,label:e}))],onChange:p}),S.filaments.length>0&&(c===`all`||c===`filament`)&&(0,G.jsx)(O5,{label:a(`profiles.cloudView.filters.filament`),value:m,options:[{value:`all`,label:a(`profiles.cloudView.filters.all`)},...S.filaments.map(e=>({value:e,label:e}))],onChange:h}),S.layerHeights.length>0&&(c===`all`||c===`process`)&&(0,G.jsx)(O5,{label:a(`profiles.cloudView.filters.layer`),value:g,options:[{value:`all`,label:a(`profiles.cloudView.filters.all`)},...S.layerHeights.map(e=>({value:e,label:e}))],onChange:_}),E&&(0,G.jsx)(`button`,{onClick:T,className:`px-3 py-2 text-sm text-bambu-gray hover:text-white transition-colors`,children:a(`profiles.cloudView.clearFilters`)})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-4 mb-4 text-sm text-bambu-gray`,children:[t&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(js,{className:`w-3 h-3`}),a(`profiles.cloudView.lastSynced`),` `,sp(t.toISOString(),`system`,a)]}),(0,G.jsx)(`span`,{children:a(`profiles.cloudView.showingCount`,{showing:w.length,total:D})})]}),w.length===0?(0,G.jsxs)(`div`,{className:`text-center py-16`,children:[(0,G.jsx)(qc,{className:`w-12 h-12 text-bambu-gray-dark mx-auto mb-4`}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:a(`profiles.cloudView.noPresetsFound`)}),E&&(0,G.jsx)(`button`,{onClick:T,className:`mt-2 text-sm text-bambu-green hover:text-bambu-green-light`,children:a(`profiles.cloudView.clearFilters`)})]}):(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-3 gap-6`,children:[(0,G.jsx)(T5,{icon:(0,G.jsx)(Xs,{className:`w-4 h-4 text-amber-600 dark:text-amber-400`}),title:a(`profiles.cloudView.columns.filament`),presets:O(`filament`),emptyText:a(`profiles.cloudView.noFilamentPresets`),onSelect:b}),(0,G.jsx)(T5,{icon:(0,G.jsx)(tu,{className:`w-4 h-4 text-blue-600 dark:text-blue-400`}),title:a(`profiles.cloudView.columns.process`),presets:O(`process`),emptyText:a(`profiles.cloudView.noProcessPresets`),onSelect:b}),(0,G.jsx)(T5,{icon:(0,G.jsx)(Ll,{className:`w-4 h-4 text-purple-600 dark:text-purple-400`}),title:a(`profiles.cloudView.columns.printer`),presets:O(`printer`),emptyText:a(`profiles.cloudView.noPrinterPresets`),onSelect:b})]}),v&&(0,G.jsx)(fKe,{setting:v,onClose:()=>b(null),t:a})]})}function T5({icon:e,title:t,presets:n,emptyText:r,onSelect:i}){return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3 px-1`,children:[e,(0,G.jsx)(`h3`,{className:`text-sm font-medium text-bambu-gray`,children:t}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray-dark`,children:[`(`,n.length,`)`]})]}),(0,G.jsx)(`div`,{className:`space-y-1 max-h-[calc(100vh-320px)] overflow-y-auto pr-1`,children:n.length===0?(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-dark px-3 py-2`,children:r}):n.map(e=>(0,G.jsx)(dKe,{preset:e,onClick:()=>i(e)},e.setting_id))})]})}function dKe({preset:e,onClick:t}){return(0,G.jsx)(`button`,{onClick:t,className:`w-full text-left px-3 py-2 rounded bg-bambu-dark hover:bg-bambu-dark-tertiary transition-colors`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-white text-sm truncate flex-1`,title:e.name,children:e.name}),e.meta.filamentType&&e.type===`filament`&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray whitespace-nowrap`,children:e.meta.filamentType}),e.meta.layerHeight&&e.type===`process`&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray whitespace-nowrap`,children:e.meta.layerHeight}),e.meta.printer&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray whitespace-nowrap`,children:e.meta.printer})]})})}function fKe({setting:e,onClose:t,t:n}){let{data:r,isLoading:i,error:a}=K({queryKey:[`orcaCloudProfileDetail`,e.setting_id],queryFn:()=>Z.orcaCloudGetProfile(e.setting_id),retry:!1});return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/60 z-50 flex items-center justify-center p-4`,onClick:t,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-2xl max-w-4xl w-full max-h-[90vh] flex flex-col`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h2`,{className:`text-lg font-bold text-white`,children:e.name}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:e.type})]}),(0,G.jsx)(`button`,{onClick:t,className:`text-bambu-gray hover:text-white p-1`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto p-4`,children:i?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-16`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):a?(0,G.jsx)(`p`,{className:`text-center text-bambu-gray py-16`,children:a.message}):r?(0,G.jsx)(`pre`,{className:`text-xs font-mono text-bambu-gray bg-bambu-dark p-3 rounded overflow-x-auto whitespace-pre`,children:JSON.stringify(r.setting,null,2)}):(0,G.jsx)(`p`,{className:`text-center text-bambu-gray py-16`,children:n(`profiles.cloudView.noPresetsFound`)})})]})})}function pKe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),{hasPermission:r}=jd(),i=r(`orca_cloud:auth`),[a,o]=(0,y.useState)(null),[s,c]=(0,y.useState)(5e3),[l,u]=(0,y.useState)(null),{data:d,isLoading:f}=K({queryKey:[`orcaCloudStatus`],queryFn:Z.orcaCloudStatus}),p=!!d?.connected,{data:m,isLoading:h,refetch:g,isRefetching:_,error:v,dataUpdatedAt:b}=K({queryKey:[`orcaCloudProfiles`],queryFn:Z.orcaCloudListProfiles,enabled:p,retry:!1,staleTime:1e3*60*5}),{data:x=[]}=K({queryKey:[`printers`],queryFn:Z.getPrinters,enabled:p}),[S,C]=(0,y.useState)();(0,y.useEffect)(()=>{b&&C(new Date(b))},[b]);let w=()=>{o(null),c(5e3)},T=t=>{t===`access_denied`?u(e(`profiles.orcaCloud.errors.denied`)):t===`expired_token`&&u(e(`profiles.orcaCloud.errors.expired`)),w()},E=q({mutationFn:Z.orcaCloudDeviceStart,onSuccess:e=>{u(null),c(Math.max(1,e.interval)*1e3),o(e)},onError:t=>{u(t.message||e(`profiles.orcaCloud.errors.startFailed`))}}),D=q({mutationFn:Z.orcaCloudLogout,onSuccess:()=>{t.invalidateQueries({queryKey:[`orcaCloudStatus`]}),t.removeQueries({queryKey:[`orcaCloudProfiles`]}),n(e(`profiles.orcaCloud.toast.disconnected`))}}),{data:O,error:k}=K({queryKey:[`orcaCloudDevicePoll`,a?.user_code??`none`],queryFn:Z.orcaCloudDevicePoll,enabled:a!==null,gcTime:0,retry:!1,refetchOnWindowFocus:!1,refetchInterval:a===null?!1:s}),A=(0,y.useRef)(null);return(0,y.useEffect)(()=>{if(!a||!O)return;let r=O.status;if(r===`slow_down`){c(e=>e+5e3);return}r!==`authorization_pending`&&A.current!==r&&(A.current=r,r===`complete`?(w(),t.invalidateQueries({queryKey:[`orcaCloudStatus`]}),t.invalidateQueries({queryKey:[`orcaCloudProfiles`]}),n(e(`profiles.orcaCloud.connectedShort`))):T(r))},[O,a]),(0,y.useEffect)(()=>{a&&k&&(u(e(`profiles.orcaCloud.errors.pollFailed`)),w())},[k,a]),(0,y.useEffect)(()=>{a&&(A.current=null)},[a]),f?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-16`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):(0,G.jsxs)(`div`,{children:[p&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-3 mb-6 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full bg-bambu-green animate-pulse`}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:d?.email?(0,G.jsxs)(G.Fragment,{children:[e(`profiles.orcaCloud.connectedAs`),` `,(0,G.jsx)(`span`,{className:`text-white`,children:d.email})]}):(0,G.jsx)(`span`,{className:`text-white`,children:e(`profiles.orcaCloud.connectedShort`)})})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>D.mutate(),disabled:D.isPending||!i,title:i?void 0:e(`profiles.orcaCloud.noLogoutPermission`),children:[(0,G.jsx)(rl,{className:`w-4 h-4`}),e(`profiles.orcaCloud.logout`)]})]}),p?h?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-16`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):v?(0,G.jsxs)(`div`,{className:`text-center py-16`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray mb-4`,children:v.message}),(0,G.jsx)(Q,{onClick:()=>g(),children:e(`profiles.orcaCloud.retry`)})]}):m?(0,G.jsx)(uKe,{settings:m,lastSyncTime:S,onRefresh:()=>g(),isRefreshing:_,printers:x,t:e}):null:(0,G.jsx)(mKe,{pairing:a,connectError:l,onConnect:()=>E.mutate(),onCancel:w,isStarting:E.isPending,canManage:i,t:e})]})}function mKe({pairing:e,connectError:t,onConnect:n,onCancel:r,isStarting:i,canManage:a,t:o}){return e?(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-8 text-center max-w-md mx-auto`,children:[(0,G.jsx)(Ps,{className:`w-12 h-12 text-bambu-green mx-auto mb-4`}),(0,G.jsx)(`h2`,{className:`text-xl font-bold text-white mb-2`,children:o(`profiles.orcaCloud.device.title`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray mb-6`,children:o(`profiles.orcaCloud.device.instruction`)}),(0,G.jsx)(`p`,{className:`text-xs uppercase tracking-wide text-bambu-gray mb-2`,children:o(`profiles.orcaCloud.device.codeLabel`)}),(0,G.jsx)(`div`,{className:`mb-6 py-3 px-4 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg`,children:(0,G.jsx)(`span`,{className:`text-2xl font-mono font-bold tracking-[0.3em] text-white select-all`,children:e.user_code})}),(0,G.jsx)(`a`,{href:e.verification_uri_complete,target:`_blank`,rel:`noopener noreferrer`,children:(0,G.jsxs)(Q,{className:`w-full mb-3`,children:[(0,G.jsx)(nc,{className:`w-4 h-4`}),o(`profiles.orcaCloud.device.openButton`)]})}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray break-all mb-6`,children:o(`profiles.orcaCloud.device.manualHint`,{url:e.verification_uri})}),(0,G.jsxs)(`div`,{className:`flex items-center justify-center gap-2 text-sm text-bambu-gray mb-4`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin text-bambu-green`}),o(`profiles.orcaCloud.device.waiting`)]}),(0,G.jsx)(`button`,{type:`button`,onClick:r,className:`text-bambu-gray hover:text-white text-sm`,children:o(`profiles.orcaCloud.device.cancel`)})]})}):(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-8 text-center`,children:[(0,G.jsx)(Ps,{className:`w-12 h-12 text-bambu-green mx-auto mb-4`}),(0,G.jsx)(`h2`,{className:`text-xl font-bold text-white mb-2`,children:o(`profiles.orcaCloud.connect.title`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray mb-6 max-w-xl mx-auto`,children:o(`profiles.orcaCloud.connect.description`)}),(0,G.jsxs)(`div`,{className:`max-w-sm mx-auto`,children:[(0,G.jsxs)(Q,{onClick:n,disabled:i||!a,title:a?void 0:o(`profiles.orcaCloud.noConnectPermission`),className:`w-full`,children:[i?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(fs,{className:`w-4 h-4`}),o(`profiles.orcaCloud.connectButton`)]}),t&&(0,G.jsxs)(`p`,{className:`mt-3 text-sm text-red-700 dark:text-red-400 flex items-center justify-center gap-2`,children:[(0,G.jsx)(ys,{className:`w-4 h-4 flex-shrink-0`}),t]})]})]})})}function E5(e,t){let n=`${e} ${t||``}`,r=n.match(/@?\s*(?:BBL\s+)?(?:Bambu\s+Lab\s+)?([XPAH][1-9][A-Z]?(?:\s*(?:Carbon|mini))?|H2D)/i),i=r?r[1].trim():null,a=n.match(/(\d+\.?\d*)\s*(?:mm\s*)?nozzle|nozzle\s*(\d+\.?\d*)/i),o=a?(a[1]||a[2])+`mm`:null,s=n.match(/(\d+\.?\d*)mm\s*(?:Standard|Fine|Extra Fine|Draft|Quality)?/i),c=s?s[1]+`mm`:null,l=n.match(/\b(PLA|PETG|ABS|ASA|TPU|PC|PA|PVA|HIPS|PP|PET(?:-?CF)?|PA(?:-?CF)?|PLA(?:-?CF)?)\b/i);return{printer:i,nozzle:o,layerHeight:c,filamentType:l?l[1].toUpperCase():null}}function D5(e){return/^(P[FPM]US|PF\d|PP\d)/.test(e)}function hKe({onSuccess:e,t}){let{showToast:n}=Gd(),[r,i]=(0,y.useState)(`email`),[a,o]=(0,y.useState)(``),[s,c]=(0,y.useState)(``),[l,u]=(0,y.useState)(``),[d,f]=(0,y.useState)(``),[p,m]=(0,y.useState)(`global`),[h,g]=(0,y.useState)(null),[_,v]=(0,y.useState)(null),[b,x]=(0,y.useState)(!1),S=q({mutationFn:()=>Z.cloudLogin(a,s,p),onSuccess:r=>{if(x(r.reason===`captcha`),r.success)n(t(`profiles.login.toast.loggedIn`)),e();else if(r.reason===`captcha`)return;else r.needs_verification?(g(r.verification_type||`email`),v(r.tfa_key||null),r.verification_type===`totp`?n(t(`profiles.login.toast.enterTotp`)):n(t(`profiles.login.toast.codeSent`)),i(`code`)):n(r.message,`error`)},onError:e=>{x(!1),n(e.message,`error`)}}),C=q({mutationFn:()=>Z.cloudVerify(a,l,_||void 0,p),onSuccess:r=>{x(r.reason===`captcha`),r.success?(n(t(`profiles.login.toast.loggedIn`)),e()):r.reason!==`captcha`&&n(r.message,`error`)},onError:e=>{x(!1),n(e.message,`error`)}}),w=q({mutationFn:()=>Z.cloudSetToken(d,p),onSuccess:()=>{n(t(`profiles.login.toast.tokenSet`)),e()},onError:e=>n(e.message,`error`)}),T=e=>{e.preventDefault(),r===`email`?S.mutate():r===`code`?C.mutate():r===`token`&&w.mutate()},E=S.isPending||C.isPending||w.isPending;return(0,G.jsx)(Ld,{className:`max-w-md mx-auto`,children:(0,G.jsxs)(zd,{children:[(0,G.jsxs)(`div`,{className:`text-center mb-6`,children:[(0,G.jsx)(`div`,{className:`inline-flex items-center justify-center w-12 h-12 rounded-xl bg-bambu-green/20 mb-3`,children:(0,G.jsx)(Ps,{className:`w-6 h-6 text-bambu-green`})}),(0,G.jsx)(`h2`,{className:`text-xl font-semibold text-white`,children:t(`profiles.login.title`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:t(`profiles.login.subtitle`)})]}),b&&r!==`token`&&(0,G.jsx)(`div`,{role:`alert`,className:`mb-4 p-3 rounded-lg border border-amber-500/40 bg-amber-500/10`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2`,children:[(0,G.jsx)(ru,{className:`w-4 h-4 text-amber-400 shrink-0 mt-0.5`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-amber-300`,children:t(`profiles.login.captchaTitle`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:t(`profiles.login.captchaBody`)}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>{x(!1),i(`token`)},className:`mt-2 text-xs text-bambu-green hover:underline flex items-center gap-1`,children:[(0,G.jsx)(Gc,{className:`w-3 h-3`}),t(`profiles.login.useToken`)]})]})]})}),(0,G.jsxs)(`form`,{onSubmit:T,className:`space-y-4`,children:[r===`email`&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:t(`profiles.login.email`)}),(0,G.jsx)(`input`,{type:`email`,value:a,onChange:e=>o(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray-dark focus:border-bambu-green focus:outline-none`,placeholder:`your@email.com`,required:!0})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:t(`profiles.login.password`)}),(0,G.jsx)(`input`,{type:`password`,value:s,onChange:e=>c(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray-dark focus:border-bambu-green focus:outline-none`,placeholder:`••••••••`,required:!0})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:t(`profiles.login.region`)}),(0,G.jsxs)(`select`,{value:p,onChange:e=>m(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`global`,children:t(`profiles.login.regionGlobal`)}),(0,G.jsx)(`option`,{value:`china`,children:t(`profiles.login.regionChina`)})]})]})]}),r===`code`&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:t(h===`totp`?`profiles.login.totpCode`:`profiles.login.verificationCode`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:h===`totp`?t(`profiles.login.enterTotpHint`):t(`profiles.login.checkEmail`,{email:a})}),(0,G.jsx)(`input`,{type:`text`,value:l,onChange:e=>u(e.target.value.replace(/\D/g,``).slice(0,6)),className:`w-full px-3 py-3 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-center text-2xl tracking-widest font-mono focus:border-bambu-green focus:outline-none`,placeholder:`000000`,maxLength:6,required:!0})]}),r===`token`&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:t(`profiles.login.accessToken`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:t(`profiles.login.accessTokenHint`)}),(0,G.jsx)(`textarea`,{value:d,onChange:e=>f(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-xs font-mono placeholder-bambu-gray-dark focus:border-bambu-green focus:outline-none resize-none`,placeholder:`eyJ...`,rows:4,required:!0})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:t(`profiles.login.region`)}),(0,G.jsxs)(`select`,{value:p,onChange:e=>m(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`global`,children:t(`profiles.login.regionGlobal`)}),(0,G.jsx)(`option`,{value:`china`,children:t(`profiles.login.regionChina`)})]})]})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 max-[550px]:flex-wrap max-[550px]:items-center`,children:[r===`code`&&(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:()=>i(`email`),className:`flex-1`,children:t(`profiles.login.back`)}),(0,G.jsxs)(Q,{type:`submit`,disabled:E,className:`flex-1`,children:[E?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(nl,{className:`w-4 h-4`}),t(r===`email`?`profiles.login.loginButton`:r===`code`?`profiles.login.verifyButton`:`profiles.login.setTokenButton`)]})]}),r===`email`&&(0,G.jsx)(`div`,{className:`pt-4 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`button`,{type:`button`,onClick:()=>i(`token`),className:`text-sm text-bambu-gray hover:text-white flex items-center gap-2 transition-colors`,children:[(0,G.jsx)(Gc,{className:`w-4 h-4`}),t(`profiles.login.useToken`)]})}),r===`token`&&(0,G.jsx)(`div`,{className:`pt-4 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`button`,{type:`button`,onClick:()=>i(`email`),className:`text-sm text-bambu-gray hover:text-white flex items-center gap-2 transition-colors`,children:[(0,G.jsx)(nl,{className:`w-4 h-4`}),t(`profiles.login.useEmail`)]})})]})]})})}function O5({label:e,value:t,options:n,onChange:r}){let[i,a]=(0,y.useState)(!1),o=n.find(e=>e.value===t);return(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsxs)(`button`,{onClick:()=>a(!i),className:`flex items-center gap-2 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-sm text-white hover:border-bambu-gray-dark transition-colors`,children:[(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[e,`:`]}),(0,G.jsx)(`span`,{children:o?.label||`All`}),(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray transition-transform ${i?`rotate-180`:``}`})]}),i&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-10`,onClick:()=>a(!1)}),(0,G.jsx)(`div`,{className:`absolute top-full left-0 mt-1 min-w-[160px] bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl z-20 py-1 max-h-60 overflow-y-auto`,children:n.map(e=>(0,G.jsxs)(`button`,{onClick:()=>{r(e.value),a(!1)},className:`w-full px-3 py-2 text-left text-sm flex items-center justify-between hover:bg-bambu-dark-tertiary transition-colors ${t===e.value?`text-bambu-green`:`text-white`}`,children:[(0,G.jsx)(`span`,{children:e.label}),e.count!==void 0&&(0,G.jsx)(`span`,{className:`text-bambu-gray text-xs`,children:e.count})]},e.value))})]})]})}function gKe(){let[e,t]=(0,y.useState)(!1);return(0,y.useEffect)(()=>{let e=()=>{t(window.scrollY>300)};return window.addEventListener(`scroll`,e),()=>window.removeEventListener(`scroll`,e)},[]),e?(0,G.jsx)(`button`,{onClick:()=>{window.scrollTo({top:0,behavior:`smooth`})},className:`fixed bottom-24 right-6 p-3 bg-bambu-green hover:bg-bambu-green-light text-white rounded-full shadow-lg shadow-bambu-green/25 transition-all z-40`,"aria-label":`Scroll to top`,children:(0,G.jsx)(Ho,{className:`w-5 h-5`})}):null}function k5({setting:e,onClick:t,onDuplicate:n,compareMode:r,isCompareSelected:i,compareIndex:a,compareDisabled:o,t:s}){let c=E5(e.name),l=D5(e.setting_id);return(0,G.jsxs)(`div`,{className:`flex items-center gap-2 group`,children:[(0,G.jsx)(`button`,{onClick:t,disabled:o,className:`flex-1 text-left px-3 py-2 rounded transition-colors ${i?`bg-blue-500/20 border border-blue-500/50`:o?`bg-bambu-dark/50 opacity-40 cursor-not-allowed`:`bg-bambu-dark hover:bg-bambu-dark-tertiary`} ${r&&!o?`cursor-pointer`:``}`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[i&&a!==void 0&&(0,G.jsx)(`span`,{className:`flex-shrink-0 w-5 h-5 rounded-full bg-blue-500 text-white text-xs flex items-center justify-center font-medium`,children:a+1}),!i&&l&&(0,G.jsx)(`span`,{className:`flex-shrink-0 w-1.5 h-1.5 rounded-full bg-bambu-green`,title:s(`profiles.presets.myPreset`)}),(0,G.jsx)(`span`,{className:`text-white text-sm truncate flex-1`,title:e.name,children:e.name}),c.filamentType&&e.type===`filament`&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray whitespace-nowrap`,children:c.filamentType}),c.layerHeight&&e.type===`process`&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray whitespace-nowrap`,children:c.layerHeight}),c.printer&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray whitespace-nowrap`,children:c.printer})]})}),(0,G.jsx)(`button`,{onClick:e=>{e.stopPropagation(),n()},className:`can-hover:opacity-0 group-hover:opacity-100 focus-visible:opacity-100 text-bambu-gray hover:text-white transition-all p-1`,title:s(`profiles.presets.duplicate`),children:(0,G.jsx)(Vs,{className:`w-4 h-4`})})]})}function A5(e,t=0){let n=`  `.repeat(t);if(e===null)return`null`;if(e===void 0)return`undefined`;if(typeof e==`string`){if(e.includes(`\\n`)||e.includes(`
 `)){let t=e.replace(/\\n/g,`
 `).replace(/\\"/g,`"`).replace(/\\t/g,`	`).split(`
 `);if(t.length>1)return`"""
@@ -4384,23 +4384,23 @@ img.ProseMirror-separator {
 `+n+`]`;if(typeof e==`object`){let r=Object.entries(e);return r.length===0?`{}`:`{
 `+r.map(([e,r])=>n+`  `+JSON.stringify(e)+`: `+A5(r,t+1)).join(`,
 `)+`
-`+n+`}`}return String(e)}function mKe({setting:e,onClose:t,onDeleted:n,onDuplicate:r,onEdit:i,hasPermission:a,t:o}){let{showToast:s}=Gd(),c=co(),[l,u]=(0,y.useState)(!1),{data:d,isLoading:f}=K({queryKey:[`cloudSettingDetail`,e.setting_id],queryFn:()=>Z.getCloudSettingDetail(e.setting_id)}),p=q({mutationFn:()=>Z.deleteCloudSetting(e.setting_id),onSuccess:()=>{s(o(`profiles.presets.toast.deleted`)),c.invalidateQueries({queryKey:[`cloudSettings`]}),n()},onError:e=>s(e.message,`error`)}),m=D5(e.setting_id),h=E5(e.name,d?.setting?.inherits);return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,children:(0,G.jsx)(Ld,{className:`w-full max-w-3xl max-h-[90vh] flex flex-col overflow-hidden`,children:(0,G.jsxs)(zd,{className:`p-0 flex flex-col min-h-0 flex-1`,children:[(0,G.jsxs)(`div`,{className:`flex-shrink-0 flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`h2`,{className:`text-xl font-semibold text-white truncate`,children:e.name}),m&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 text-xs font-medium bg-bambu-green/20 text-bambu-green rounded-full`,children:o(`profiles.presets.editable`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mt-1 text-sm text-bambu-gray`,children:[(0,G.jsx)(`span`,{className:`capitalize`,children:o(`profiles.presets.types.${e.type}`)}),h.printer&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{children:`•`}),(0,G.jsx)(`span`,{children:h.printer})]})]})]}),(0,G.jsx)(`button`,{onClick:t,className:`p-2 text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary rounded-lg transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(`div`,{className:`flex-1 min-h-0 overflow-y-auto p-4`,children:f?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-16`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):d?(0,G.jsx)(`pre`,{className:`text-xs text-bambu-gray font-mono whitespace-pre-wrap break-all bg-bambu-dark p-4 rounded-lg border border-bambu-dark-tertiary overflow-x-auto max-w-full`,children:A5(d)}):(0,G.jsx)(`div`,{className:`text-center py-16 text-bambu-gray`,children:o(`profiles.presets.failedToLoadDetails`)})}),l?(0,G.jsxs)(`div`,{className:`flex-shrink-0 p-4 border-t border-bambu-dark-tertiary bg-red-500/5`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3 text-red-700 dark:text-red-400`,children:[(0,G.jsx)(Iu,{className:`w-5 h-5`}),(0,G.jsx)(`span`,{className:`font-medium`,children:o(`profiles.presets.deleteConfirm`)})]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4`,children:o(`profiles.presets.deleteWarning`,{name:e.name})}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>u(!1),disabled:p.isPending,className:`flex-1`,children:o(`common.cancel`)}),(0,G.jsxs)(Q,{variant:`danger`,onClick:()=>p.mutate(),disabled:p.isPending,className:`flex-1`,children:[p.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Nu,{className:`w-4 h-4`}),o(`common.delete`)]})]})]}):(0,G.jsx)(`div`,{className:`flex-shrink-0 p-4 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:t,className:`flex-1`,children:o(`common.close`)}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:r,disabled:!a(`cloud:auth`),title:a(`cloud:auth`)?void 0:o(`profiles.presets.noDuplicatePermission`),children:[(0,G.jsx)(Vs,{className:`w-4 h-4`}),o(`profiles.presets.duplicate`)]}),m&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:i,disabled:f||!d||!a(`cloud:auth`),title:a(`cloud:auth`)?void 0:o(`profiles.presets.noEditPermission`),children:[(0,G.jsx)(kl,{className:`w-4 h-4`}),o(`common.edit`)]}),(0,G.jsx)(Q,{variant:`danger`,onClick:()=>u(!0),disabled:!a(`cloud:auth`),title:a(`cloud:auth`)?void 0:o(`profiles.presets.noDeletePermission`),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})]})})]})})})}function hKe(){try{let e=localStorage.getItem(`bambusy_preset_templates`);return e?JSON.parse(e):[]}catch{return[]}}function gKe(e){localStorage.setItem(`bambusy_preset_templates`,JSON.stringify(e))}function _Ke({onClose:e,onApply:t,t:n}){let{showToast:r}=Gd(),[i,a]=(0,y.useState)(hKe),[o,s]=(0,y.useState)(`all`),[c,l]=(0,y.useState)(null),[u,d]=(0,y.useState)(``),[f,p]=(0,y.useState)(``),[m,h]=(0,y.useState)(`{}`),[g,_]=(0,y.useState)(null),[v,b]=(0,y.useState)(null),x=o===`all`?i:i.filter(e=>e.type===o),S=e=>{a(e),gKe(e)},C=e=>{S(i.filter(t=>t.id!==e)),b(null),r(n(`profiles.templates.toast.deleted`))},w=e=>{l(e.id),d(e.name),p(e.description),h(JSON.stringify(e.settings,null,2)),_(null)},T=()=>{if(!(!c||!u.trim()))try{let e=JSON.parse(m);S(i.map(t=>t.id===c?{...t,name:u.trim(),description:f.trim(),settings:e}:t)),l(null),r(n(`profiles.templates.toast.updated`))}catch(e){_(e.message)}},E=()=>{l(null),d(``),p(``),h(`{}`),_(null)},D=e=>{S(i.map(t=>t.id===e?{...t,showInModal:!t.showInModal}:t))},O={filament:{label:n(`profiles.presets.types.filament`),icon:Xs,color:`text-amber-600 dark:text-amber-400`},print:{label:n(`profiles.presets.types.process`),icon:tu,color:`text-blue-600 dark:text-blue-400`},printer:{label:n(`profiles.presets.types.printer`),icon:Ll,color:`text-purple-600 dark:text-purple-400`}},k=v?i.find(e=>e.id===v):null;return(0,y.useEffect)(()=>{let t=t=>{t.key===`Escape`&&(v?b(null):c?E():e())};return window.addEventListener(`keydown`,t),()=>window.removeEventListener(`keydown`,t)},[v,c,e]),(0,G.jsxs)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,children:[k&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-60`,children:(0,G.jsx)(Ld,{className:`w-full max-w-md`,children:(0,G.jsxs)(zd,{className:`p-6`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mb-4`,children:[(0,G.jsx)(`div`,{className:`p-2 bg-red-500/20 rounded-lg`,children:(0,G.jsx)(Iu,{className:`w-6 h-6 text-red-600 dark:text-red-400`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white`,children:n(`profiles.templates.deleteTitle`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`profiles.templates.deleteWarning`)})]})]}),(0,G.jsx)(`p`,{className:`text-white mb-6`,children:n(`profiles.templates.deleteConfirm`,{name:k.name})}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>b(null),className:`flex-1`,children:n(`common.cancel`)}),(0,G.jsxs)(Q,{onClick:()=>C(v),className:`flex-1 bg-red-500 hover:bg-red-600`,children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),n(`common.delete`)]})]})]})})}),(0,G.jsx)(Ld,{className:`w-full max-w-2xl max-h-[80vh] flex flex-col`,children:(0,G.jsxs)(zd,{className:`p-0 flex flex-col h-full`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(gu,{className:`w-5 h-5 text-amber-600 dark:text-amber-400`}),n(`profiles.templates.title`)]}),(0,G.jsx)(`button`,{onClick:e,className:`text-bambu-gray hover:text-white`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:n(`profiles.templates.typeFilter`)}),[`all`,`filament`,`print`,`printer`].map(e=>(0,G.jsx)(`button`,{onClick:()=>s(e),className:`px-3 py-1 text-sm rounded-lg transition-colors ${o===e?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,children:e===`all`?n(`common.all`):O[e].label},e))]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto p-4`,children:x.length===0?(0,G.jsxs)(`div`,{className:`text-center py-12 text-bambu-gray`,children:[(0,G.jsx)(gu,{className:`w-12 h-12 mx-auto mb-4 opacity-30`}),(0,G.jsx)(`p`,{children:n(`profiles.templates.noTemplates`)}),(0,G.jsx)(`p`,{className:`text-sm mt-1`,children:n(`profiles.templates.createFirst`)})]}):(0,G.jsx)(`div`,{className:`space-y-2`,children:x.map(e=>{let r=O[e.type],i=r.icon;return c===e.id?(0,G.jsxs)(`div`,{className:`p-4 bg-bambu-dark rounded-lg border border-bambu-green`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3 mb-3`,children:[(0,G.jsx)(`input`,{type:`text`,value:u,onChange:e=>d(e.target.value),placeholder:n(`profiles.templates.namePlaceholder`),className:`px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,autoFocus:!0}),(0,G.jsx)(`input`,{type:`text`,value:f,onChange:e=>p(e.target.value),placeholder:n(`profiles.templates.descriptionPlaceholder`),className:`px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`mb-3`,children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray mb-1 block`,children:n(`profiles.templates.settingsJson`)}),(0,G.jsx)(`textarea`,{value:m,onChange:e=>{h(e.target.value),_(null)},rows:6,className:`w-full px-3 py-2 bg-bambu-dark-secondary border rounded text-white text-sm font-mono focus:outline-none ${g?`border-red-500`:`border-bambu-dark-tertiary focus:border-bambu-green`}`}),g&&(0,G.jsx)(`p`,{className:`text-xs text-red-700 dark:text-red-400 mt-1`,children:g})]}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(Q,{size:`sm`,onClick:T,disabled:!u.trim(),children:[(0,G.jsx)(Kl,{className:`w-4 h-4`}),`Save`]}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:E,children:`Cancel`})]})]},e.id):(0,G.jsxs)(`div`,{className:`flex items-center gap-3 p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary hover:border-bambu-gray-dark transition-colors`,children:[(0,G.jsx)(i,{className:`w-5 h-5 ${r.color} flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white`,children:e.name}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray truncate`,children:e.description})]}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray-dark px-2 py-1 bg-bambu-dark-secondary rounded`,children:n(`profiles.templates.fieldsCount`,{count:Object.keys(e.settings).length})}),(0,G.jsx)(`button`,{onClick:()=>D(e.id),className:`p-1 transition-colors ${e.showInModal?`text-bambu-green hover:text-bambu-green/70`:`text-bambu-gray hover:text-white`}`,title:e.showInModal?n(`profiles.templates.shownInModals`):n(`profiles.templates.hiddenInModals`),children:e.showInModal?(0,G.jsx)(ic,{className:`w-4 h-4`}):(0,G.jsx)(rc,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>t(e),className:`px-3 py-1 text-xs bg-bambu-green/20 text-bambu-green rounded hover:bg-bambu-green/30 transition-colors`,children:n(`profiles.templates.apply`)}),(0,G.jsx)(`button`,{onClick:()=>w(e),className:`p-1 text-bambu-gray hover:text-white`,title:n(`common.edit`),children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>b(e.id),className:`p-1 text-bambu-gray hover:text-red-600 dark:hover:text-red-400`,title:n(`common.delete`),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]},e.id)})})})]})})]})}function vKe({onClose:e,leftPreset:t,rightPreset:n,leftLabel:r,rightLabel:i,t:a}){let[o,s]=(0,y.useState)(`changes`),[c,l]=(0,y.useState)(``),u=(0,y.useMemo)(()=>{let e=new Set([...Object.keys(t),...Object.keys(n)]),r=[];for(let i of e){if(i===`inherits`||i===`version`)continue;let e=t[i],a=n[i],o=i in t,s=i in n,c;c=!o&&s?`added`:o&&!s?`removed`:JSON.stringify(e)===JSON.stringify(a)?`same`:`changed`,r.push({key:i,left:e,right:a,status:c})}return r.sort((e,t)=>{let n={changed:0,added:1,removed:2,same:3};return n[e.status]===n[t.status]?e.key.localeCompare(t.key):n[e.status]-n[t.status]})},[t,n]),d=(0,y.useMemo)(()=>{let e=[...u];if(o===`changes`&&(e=e.filter(e=>e.status!==`same`)),c){let t=c.toLowerCase();e=e.filter(e=>e.key.toLowerCase().includes(t)||String(e.left).toLowerCase().includes(t)||String(e.right).toLowerCase().includes(t))}return e},[u,o,c]),f=(0,y.useMemo)(()=>({added:u.filter(e=>e.status===`added`).length,removed:u.filter(e=>e.status===`removed`).length,changed:u.filter(e=>e.status===`changed`).length,same:u.filter(e=>e.status===`same`).length}),[u]),p=e=>{if(e===void 0)return`—`;if(e===null)return`null`;if(Array.isArray(e))return e.length===0?`[]`:e.length===1?String(e[0]):e.join(`, `);if(typeof e==`object`)return JSON.stringify(e);let t=String(e);if(t.includes(`\\n`)||t.length>100){let e=t.split(`\\n`).length;if(e>1)return`[${e} lines of G-code/script]`;if(t.length>100)return t.substring(0,100)+`…`}return t};return(0,y.useEffect)(()=>{let t=t=>{t.key===`Escape`&&e()};return window.addEventListener(`keydown`,t),()=>window.removeEventListener(`keydown`,t)},[e]),(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,children:(0,G.jsx)(Ld,{className:`w-full max-w-4xl max-h-[85vh] flex flex-col overflow-hidden`,children:(0,G.jsxs)(zd,{className:`p-0 flex flex-col min-h-0 flex-1`,children:[(0,G.jsxs)(`div`,{className:`flex-shrink-0 flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Dc,{className:`w-5 h-5 text-blue-600 dark:text-blue-400`}),a(`profiles.diff.title`)]}),(0,G.jsx)(`button`,{onClick:e,className:`text-bambu-gray hover:text-white`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`flex-shrink-0 grid grid-cols-2 gap-4 p-4 border-b border-bambu-dark-tertiary bg-bambu-dark`,children:[(0,G.jsxs)(`div`,{className:`text-center`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:a(`profiles.diff.left`)}),(0,G.jsx)(`p`,{className:`text-white font-medium truncate`,children:r})]}),(0,G.jsxs)(`div`,{className:`text-center`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:a(`profiles.diff.right`)}),(0,G.jsx)(`p`,{className:`text-white font-medium truncate`,children:i})]})]}),(0,G.jsxs)(`div`,{className:`flex-shrink-0 flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-4 text-sm`,children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-green-700 dark:text-green-400`,children:[(0,G.jsx)(Pl,{className:`w-3.5 h-3.5`}),f.added,` `,a(`profiles.diff.added`)]}),(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-red-700 dark:text-red-400`,children:[(0,G.jsx)(pl,{className:`w-3.5 h-3.5`}),f.removed,` `,a(`profiles.diff.removed`)]}),(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-amber-700 dark:text-amber-400`,children:[(0,G.jsx)(zo,{className:`w-3.5 h-3.5`}),f.changed,` `,a(`profiles.diff.changed`)]}),(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-bambu-gray`,children:[(0,G.jsx)(ec,{className:`w-3.5 h-3.5`}),f.same,` `,a(`profiles.diff.same`)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-2 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:c,onChange:e=>l(e.target.value),placeholder:a(`profiles.diff.searchFields`),className:`pl-8 pr-3 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none w-48`})]}),f.same>0&&(0,G.jsxs)(`div`,{className:`flex rounded overflow-hidden border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`button`,{onClick:()=>s(`changes`),className:`px-3 py-1.5 text-sm transition-colors ${o===`changes`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,children:a(`profiles.diff.changes`)}),(0,G.jsx)(`button`,{onClick:()=>s(`all`),className:`px-3 py-1.5 text-sm transition-colors ${o===`all`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,children:a(`common.all`)})]})]})]}),(0,G.jsx)(`div`,{className:`flex-1 min-h-0 overflow-y-auto`,children:d.length===0?(0,G.jsxs)(`div`,{className:`text-center py-12 text-bambu-gray`,children:[(0,G.jsx)(ec,{className:`w-12 h-12 mx-auto mb-4 opacity-30`}),(0,G.jsx)(`p`,{children:a(o===`changes`?`profiles.diff.noDifferences`:`profiles.diff.noFieldsMatch`)})]}):(0,G.jsxs)(`table`,{className:`w-full`,children:[(0,G.jsx)(`thead`,{className:`sticky top-0 bg-bambu-dark-secondary`,children:(0,G.jsxs)(`tr`,{className:`text-sm text-bambu-gray border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`th`,{className:`text-left p-3 w-1/3`,children:a(`profiles.diff.field`)}),(0,G.jsx)(`th`,{className:`text-left p-3 w-1/3`,children:r}),(0,G.jsx)(`th`,{className:`text-left p-3 w-1/3`,children:i})]})}),(0,G.jsx)(`tbody`,{children:d.map(e=>{let t={added:`bg-green-500/10`,removed:`bg-red-500/10`,changed:`bg-amber-500/10`,same:``}[e.status],n={added:(0,G.jsx)(Pl,{className:`w-3.5 h-3.5 text-green-600 dark:text-green-400`}),removed:(0,G.jsx)(pl,{className:`w-3.5 h-3.5 text-red-600 dark:text-red-400`}),changed:(0,G.jsx)(zo,{className:`w-3.5 h-3.5 text-amber-600 dark:text-amber-400`}),same:(0,G.jsx)(ec,{className:`w-3.5 h-3.5 text-bambu-gray-dark`})}[e.status];return(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary ${t}`,children:[(0,G.jsx)(`td`,{className:`p-3`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[n,(0,G.jsx)(`span`,{className:`text-sm text-white font-mono`,children:e.key})]})}),(0,G.jsx)(`td`,{className:`p-3`,children:(0,G.jsx)(`span`,{className:`text-sm font-mono break-all ${e.status===`removed`?`text-red-700 dark:text-red-300`:e.status===`changed`?`text-white`:`text-bambu-gray`}`,children:p(e.left)})}),(0,G.jsx)(`td`,{className:`p-3`,children:(0,G.jsx)(`span`,{className:`text-sm font-mono break-all ${e.status===`added`?`text-green-700 dark:text-green-300`:e.status===`changed`?`text-white`:`text-bambu-gray`}`,children:p(e.right)})})]},e.key)})})]})})]})})})}function yKe({onClose:e,initialData:t,allPresets:n,t:r}){let{showToast:i}=Gd(),a=co(),o=!!t?.setting_id,[s,c]=(0,y.useState)(`common`),[l,u]=(0,y.useState)(t?.type||`filament`),[d,f]=(0,y.useState)(t?.name?o?t.name:`${t.name} (Copy)`:``),[p,m]=(0,y.useState)(t?.base_id||``),[h,g]=(0,y.useState)(``),[_,v]=(0,y.useState)(t?.setting||{inherits:``}),[b,x]=(0,y.useState)(JSON.stringify(t?.setting||{inherits:``},null,2)),[S,C]=(0,y.useState)(null),[w,T]=(0,y.useState)(``),[E,D]=(0,y.useState)(!1),[O,k]=(0,y.useState)(``),[A,j]=(0,y.useState)(!1),[M,N]=(0,y.useState)(hKe),[P,F]=(0,y.useState)(!1),[I,L]=(0,y.useState)(``),[R,z]=(0,y.useState)(``),[B,V]=(0,y.useState)(!0),[ee,te]=(0,y.useState)(null),[ne,re]=(0,y.useState)(!1),ie=(0,y.useMemo)(()=>({filament:n.filament,print:n.process,printer:n.printer})[l]||[],[n,l]),ae=(0,y.useMemo)(()=>ie.filter(e=>D5(e.setting_id)),[ie]),{data:oe}=K({queryKey:[`cloudFields`,l],queryFn:()=>Z.getCloudFields(l===`print`?`process`:l),staleTime:1e3*60*60}),{data:se}=K({queryKey:[`allPresetDetails`,l,ae.map(e=>e.setting_id).join(`,`)],queryFn:async()=>{let e={};for(let t=0;t<ae.length;t+=5){let n=ae.slice(t,t+5);(await Promise.all(n.map(async e=>{try{let t=await Z.getCloudSettingDetail(e.setting_id);return{id:e.setting_id,detail:t}}catch{return null}}))).forEach(t=>{t&&(e[t.id]=t.detail)})}return e},enabled:ae.length>0,staleTime:1e3*60*10}),{data:H,isLoading:ce}=K({queryKey:[`cloudSettingDetail`,p],queryFn:()=>Z.getCloudSettingDetail(p),enabled:!!p});(0,y.useEffect)(()=>{s!==`json`&&x(JSON.stringify(_,null,2))},[_,s]);let le=(0,y.useMemo)(()=>({filament:n.filament,print:n.process,printer:n.printer}[l]||[]).filter(e=>!D5(e.setting_id)).sort((e,t)=>e.name.localeCompare(t.name)),[n,l]);(0,y.useEffect)(()=>{if(!p)return;let e=le.find(e=>e.setting_id===p);e&&(g(e.name),o||(v({inherits:e.name}),x(JSON.stringify({inherits:e.name},null,2))))},[p,le,o]);let ue=(0,y.useMemo)(()=>{let e=oe?.fields||[],t=new Set(e.map(e=>e.key)),n=new Set,i=new Set([`inherits`,`updated_time`,`compatible_printers`,`compatible_prints`]);se&&Object.values(se).forEach(e=>{e?.setting&&Object.keys(e.setting).forEach(e=>{!t.has(e)&&!i.has(e)&&n.add(e)})}),Object.keys(_).forEach(e=>{!t.has(e)&&!i.has(e)&&n.add(e)});let a=Array.from(n).sort().map(e=>({key:e,label:e.replace(/_/g,` `).replace(/\b\w/g,e=>e.toUpperCase()),type:`text`,category:`discovered`,description:r(`profiles.presets.discoveredFromPresets`)}));return[...e,...a]},[oe,se,_,r]),de=ue.filter(e=>e.label.toLowerCase().includes(w.toLowerCase())||e.key.toLowerCase().includes(w.toLowerCase())),fe=()=>{if(O.trim()){let e=O.trim().toLowerCase().replace(/\s+/g,`_`);pe(e,``),k(``),j(!1),i(r(`profiles.presets.toast.fieldAdded`,{key:e}))}},pe=(e,t)=>{v(n=>{let r={...n};return t===``||t===void 0?delete r[e]:r[e]=t,r})},me=e=>{v(t=>({...t,...e.settings})),te(e.name),i(r(`profiles.templates.toast.applied`))},he=()=>{if(!I.trim())return;let e={..._};if(delete e.inherits,Object.keys(e).length===0){i(r(`profiles.presets.noOverridesToSave`),`error`);return}let t={id:Date.now().toString(),name:I.trim(),description:R.trim()||r(`profiles.presets.customTemplate`),type:l,settings:e,showInModal:B},n=[...M,t];N(n),gKe(n),F(!1),L(``),z(``),V(!0),i(r(`profiles.templates.toast.created`))},ge=(0,y.useMemo)(()=>M.filter(e=>e.type===l&&e.showInModal),[l,M]),_e=e=>{x(e);try{v(JSON.parse(e)),C(null)}catch(e){C(e.message)}},ve=e=>{e.preventDefault(),D(!1);let t=e.dataTransfer.files[0];if(t&&t.name.endsWith(`.json`)){let e=new FileReader;e.onload=e=>{try{let t=e.target?.result,n=JSON.parse(t),a=n.setting||n;v(e=>({...e,...a})),x(JSON.stringify({..._,...a},null,2)),i(r(`profiles.presets.fileImported`))}catch{i(r(`profiles.presets.invalidJsonFile`),`error`)}},e.readAsText(t)}},ye=q({mutationFn:()=>{let e={..._},t=l===`filament`?`filament_settings_id`:l===`print`?`print_settings_id`:`printer_settings_id`;e[t]=`"${d}"`;let n={type:l,name:d,base_id:p,setting:e};return Z.createCloudSetting(n)},onSuccess:async()=>{i(r(`profiles.presets.toast.created`)),await a.refetchQueries({queryKey:[`cloudSettings`]}),e()},onError:e=>i(e.message,`error`)}),be=q({mutationFn:()=>{if(!t?.setting_id)throw Error(r(`profiles.presets.noSettingId`));return Z.updateCloudSetting(t.setting_id,{name:d,setting:_})},onSuccess:async()=>{i(r(`profiles.presets.toast.updated`)),a.removeQueries({queryKey:[`cloudSettingDetail`]}),await a.refetchQueries({queryKey:[`cloudSettings`]}),e()},onError:e=>i(e.message,`error`)}),xe=o?be:ye,Se=H?.setting?.inherits,Ce=Se?le.find(e=>e.name===Se):void 0,{data:we}=K({queryKey:[`cloudSettingDetail`,Ce?.setting_id],queryFn:()=>Z.getCloudSettingDetail(Ce.setting_id),enabled:!!Ce?.setting_id}),Te=(0,y.useMemo)(()=>{let e=we?.setting||{},t=H?.setting||{},n=p&&se?.[p]?.setting?se[p].setting:{};return{...e,...t,...n}},[p,H,we,se]),Ee=e=>{if(e==null)return``;if(Array.isArray(e)){let t=[...new Set(e.map(e=>String(e)))];return t.length===1?t[0]:e.join(`, `)}return String(e)},De=e=>{let t=_[e.key],n=Te[e.key],i=Ee(n),a=ce?r(`common.loading`):i||``,o=`w-full px-3 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`;if(e.type===`boolean`){let r=t===`1`||t===void 0&&n===`1`;return(0,G.jsx)(`button`,{type:`button`,onClick:()=>pe(e.key,t===`1`?`0`:`1`),className:`w-8 h-5 rounded-full transition-colors ${r?`bg-bambu-green`:`bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(`div`,{className:`w-4 h-4 rounded-full bg-white shadow transition-transform ${r?`translate-x-3.5`:`translate-x-0.5`}`})})}return e.type===`select`?(0,G.jsxs)(`select`,{value:t||``,onChange:t=>pe(e.key,t.target.value),className:o,children:[(0,G.jsx)(`option`,{value:``,children:a}),e.options?.map(e=>(0,G.jsx)(`option`,{value:e.value,children:e.label},e.value))]}):(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:e.type===`number`?`number`:`text`,value:t===void 0?``:String(t),onChange:t=>pe(e.key,t.target.value),step:e.step,min:e.min,max:e.max,placeholder:a,className:o}),e.unit&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray whitespace-nowrap`,children:e.unit})]})},Oe=(0,y.useMemo)(()=>H?.setting?H.setting:{},[H]);return(0,G.jsxs)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,onDragOver:e=>{e.preventDefault(),D(!0)},onDragLeave:()=>D(!1),onDrop:ve,children:[ne&&p&&(0,G.jsx)(vKe,{onClose:()=>re(!1),leftPreset:Oe,rightPreset:_,leftLabel:r(`profiles.presets.baseLabel`,{name:h||p}),rightLabel:r(`profiles.presets.currentLabel`,{name:d||r(`profiles.presets.newPreset`)}),t:r}),(0,G.jsx)(Ld,{className:`w-full max-w-6xl max-h-[90vh] flex flex-col overflow-y-auto`,children:(0,G.jsxs)(zd,{className:`p-0 flex flex-col h-full`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h2`,{className:`text-xl font-semibold text-white`,children:r(o?`profiles.presets.editPreset`:t?`profiles.presets.duplicatePreset`:`profiles.presets.createNewPreset`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:r(`profiles.presets.customizeSettings`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[p&&(0,G.jsxs)(`button`,{onClick:()=>re(!0),className:`flex items-center gap-2 px-3 py-2 text-sm text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary rounded-lg transition-colors`,title:r(`profiles.presets.compareWithBase`),children:[(0,G.jsx)(Dc,{className:`w-4 h-4`}),r(`profiles.presets.compare`)]}),(0,G.jsx)(`button`,{onClick:e,className:`p-2 text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary rounded-lg transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]})]}),E&&(0,G.jsx)(`div`,{className:`absolute inset-0 bg-bambu-green/10 border-2 border-dashed border-bambu-green rounded-lg flex items-center justify-center z-10`,children:(0,G.jsxs)(`div`,{className:`text-center`,children:[(0,G.jsx)(Bu,{className:`w-12 h-12 text-bambu-green mx-auto mb-2`}),(0,G.jsx)(`p`,{className:`text-bambu-green font-medium`,children:r(`profiles.presets.dropJsonToImport`)})]})}),(0,G.jsxs)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary space-y-3`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-3 gap-4 max-[640px]:grid-cols-1`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`common.type`)}),(0,G.jsxs)(`select`,{value:l,onChange:e=>{u(e.target.value),m(``)},className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`filament`,children:r(`profiles.presets.types.filament`)}),(0,G.jsx)(`option`,{value:`print`,children:r(`profiles.presets.types.process`)}),(0,G.jsx)(`option`,{value:`printer`,children:r(`profiles.presets.types.printer`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`profiles.presets.basePreset`)}),(0,G.jsxs)(`select`,{value:p,onChange:e=>m(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:``,children:r(`profiles.presets.selectBasePreset`)}),le.map(e=>(0,G.jsx)(`option`,{value:e.setting_id,children:e.name},e.setting_id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`profiles.presets.presetName`)}),(0,G.jsx)(`input`,{type:`text`,value:d,onChange:e=>f(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,placeholder:r(`profiles.presets.myCustomPreset`)})]})]}),h&&(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray`,children:(0,G.jsxs)(`p`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(fs,{className:`w-3 h-3 text-bambu-green`}),r(`profiles.presets.inheritsFrom`),` `,(0,G.jsx)(`span`,{className:`text-white`,children:h}),ce&&(0,G.jsx)(Y,{className:`w-3 h-3 animate-spin ml-1`})]})})]}),(0,G.jsxs)(`div`,{className:`flex border-b border-bambu-dark-tertiary max-[640px]:flex-wrap max-[640px]:items-center`,children:[(0,G.jsxs)(`button`,{onClick:()=>c(`common`),className:`flex items-center gap-2 px-4 py-3 text-sm font-medium transition-colors border-b-2 -mb-px ${s===`common`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-white border-transparent`}`,children:[(0,G.jsx)(fu,{className:`w-4 h-4`}),r(`profiles.presets.tabs.common`)]}),(0,G.jsxs)(`button`,{onClick:()=>c(`fields`),className:`flex items-center gap-2 px-4 py-3 text-sm font-medium transition-colors border-b-2 -mb-px ${s===`fields`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-white border-transparent`}`,children:[(0,G.jsx)($c,{className:`w-4 h-4`}),r(`profiles.presets.tabs.allFields`)]}),(0,G.jsxs)(`button`,{onClick:()=>c(`json`),className:`flex items-center gap-2 px-4 py-3 text-sm font-medium transition-colors border-b-2 -mb-px ${s===`json`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-white border-transparent`}`,children:[(0,G.jsx)(Fs,{className:`w-4 h-4`}),`JSON`,S&&(0,G.jsx)(ys,{className:`w-3 h-3 text-red-600 dark:text-red-400`})]}),(0,G.jsx)(`div`,{className:`flex-1 max-[640px]:hidden`}),(0,G.jsxs)(`button`,{onClick:()=>{let e=new Blob([JSON.stringify({name:d,type:l,base_id:p,setting:_},null,2)],{type:`application/json`}),t=URL.createObjectURL(e),n=document.createElement(`a`);n.href=t,n.download=`${d||`preset`}.json`,document.body.appendChild(n),n.click(),document.body.removeChild(n),URL.revokeObjectURL(t),i(r(`profiles.presets.toast.exported`))},className:`flex items-center gap-2 px-4 py-3 text-sm text-bambu-gray hover:text-white transition-colors`,title:r(`profiles.presets.exportToJson`),children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),r(`common.download`)]}),(0,G.jsxs)(`button`,{onClick:()=>document.getElementById(`file-import`)?.click(),className:`flex items-center gap-2 px-4 py-3 text-sm text-bambu-gray hover:text-white transition-colors`,title:r(`profiles.presets.importFromJson`),children:[(0,G.jsx)(Bu,{className:`w-4 h-4`}),r(`common.upload`)]}),(0,G.jsx)(`input`,{id:`file-import`,type:`file`,accept:`.json`,className:`hidden`,onChange:e=>{let t=e.target.files?.[0];if(t){let e=new FileReader;e.onload=e=>{try{let t=JSON.parse(e.target?.result),n=t.setting||t;v(e=>({...e,...n})),i(r(`profiles.presets.fileImported`))}catch{i(r(`profiles.presets.invalidJson`),`error`)}},e.readAsText(t)}}})]}),(0,G.jsxs)(`div`,{className:`flex-1 p-4`,children:[s===`common`&&(0,G.jsxs)(`div`,{className:`space-y-6`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3`,children:[(0,G.jsxs)(`h3`,{className:`text-sm font-medium text-white flex items-center gap-2`,children:[(0,G.jsx)(gu,{className:`w-4 h-4 text-amber-600 dark:text-amber-400`}),r(`profiles.templates.title`)]}),Object.keys(_).filter(e=>e!==`inherits`).length>0&&(0,G.jsxs)(`button`,{onClick:()=>F(!P),className:`text-xs text-bambu-gray hover:text-white flex items-center gap-1 transition-colors`,children:[(0,G.jsx)(Kl,{className:`w-3 h-3`}),r(`profiles.presets.saveAsTemplate`)]})]}),P&&(0,G.jsxs)(`div`,{className:`mb-3 p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2 mb-2`,children:[(0,G.jsx)(`input`,{type:`text`,value:I,onChange:e=>L(e.target.value),placeholder:r(`profiles.templates.namePlaceholder`),className:`px-3 py-1.5 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,autoFocus:!0}),(0,G.jsx)(`input`,{type:`text`,value:R,onChange:e=>z(e.target.value),placeholder:r(`profiles.templates.descriptionPlaceholder`),className:`px-3 py-1.5 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(Q,{size:`sm`,onClick:he,disabled:!I.trim(),children:[(0,G.jsx)(Kl,{className:`w-3 h-3`}),r(`common.save`)]}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>F(!1),children:r(`common.cancel`)})]}),(0,G.jsxs)(`button`,{onClick:()=>V(!B),className:`flex items-center gap-1.5 text-xs transition-colors ${B?`text-bambu-green`:`text-bambu-gray hover:text-white`}`,children:[B?(0,G.jsx)(ic,{className:`w-3.5 h-3.5`}):(0,G.jsx)(rc,{className:`w-3.5 h-3.5`}),r(B?`profiles.templates.shownInModals`:`profiles.templates.hiddenInModals`)]})]})]}),ee&&(0,G.jsxs)(`div`,{className:`mb-3 px-3 py-2 bg-bambu-green/10 border border-bambu-green/30 rounded-lg flex items-center gap-2`,children:[(0,G.jsx)(fs,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsxs)(`span`,{className:`text-sm text-bambu-green`,children:[r(`profiles.presets.templateApplied`),` `,(0,G.jsx)(`span`,{className:`font-medium`,children:ee})]}),(0,G.jsx)(`button`,{onClick:()=>te(null),className:`ml-auto text-bambu-green/70 hover:text-bambu-green`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-3 gap-2`,children:[ge.map(e=>(0,G.jsxs)(`button`,{onClick:()=>me(e),className:`p-3 text-left bg-bambu-dark border border-bambu-dark-tertiary rounded-lg hover:border-bambu-gray-dark transition-colors`,children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white`,children:e.name}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e.description})]},e.id)),ge.length===0&&(0,G.jsx)(`p`,{className:`col-span-3 text-center text-bambu-gray text-sm py-4`,children:r(`profiles.presets.noTemplatesSelected`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-dark mt-2 text-center`,children:r(`profiles.presets.manageTemplatesHint`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white mb-3`,children:r(`profiles.presets.commonSettings`)}),(0,G.jsx)(`div`,{className:`grid grid-cols-2 gap-x-6 gap-y-3`,children:ue.slice(0,10).map(e=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-4 max-[640px]:flex-col max-[640px]:items-start`,children:[(0,G.jsx)(`label`,{className:`text-sm text-bambu-gray flex-shrink-0`,children:e.label}),(0,G.jsx)(`div`,{className:`w-48 max-[640px]:w-full`,children:De(e)})]},e.key))})]}),Object.keys(_).length>1&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white mb-3`,children:r(`profiles.presets.currentOverrides`)}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-2`,children:Object.entries(_).filter(([e])=>e!==`inherits`).map(([e,t])=>(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 px-2 py-1 bg-bambu-green/10 text-bambu-green text-xs rounded`,children:[e,`: `,String(t).slice(0,20),(0,G.jsx)(`button`,{onClick:()=>pe(e,void 0),className:`hover:text-white`,children:(0,G.jsx)(td,{className:`w-3 h-3`})})]},e))})]})]}),s===`fields`&&(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-6`,style:{height:`400px`},children:[(0,G.jsxs)(`div`,{className:`flex flex-col h-full overflow-hidden`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3 flex-shrink-0`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white`,children:r(`profiles.presets.availableFields`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:se?r(`profiles.templates.fieldsCount`,{count:ue.length}):r(`common.loading`)})]}),(0,G.jsxs)(`div`,{className:`relative mb-3 flex-shrink-0`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:w,onChange:e=>T(e.target.value),placeholder:r(`profiles.presets.searchFieldsPlaceholder`),className:`w-full pl-10 pr-4 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder-bambu-gray-dark focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`flex-1 overflow-y-auto space-y-1 pr-2 min-h-0`,children:[de.filter(e=>!(e.key in _)).map(e=>{let t=Te[e.key],n=Ee(t);return(0,G.jsxs)(`div`,{onClick:()=>{v(t=>({...t,[e.key]:n||``}))},className:`flex items-center justify-between gap-2 p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors cursor-pointer group`,children:[(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white truncate`,children:e.label}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-dark truncate`,children:e.key})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-shrink-0`,children:[n&&(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray bg-bambu-dark px-2 py-0.5 rounded max-w-32 truncate`,title:n,children:[n.slice(0,20),n.length>20?`...`:``]}),(0,G.jsx)(`div`,{className:`w-6 h-6 flex items-center justify-center rounded bg-bambu-dark-tertiary group-hover:bg-bambu-green/20 transition-colors`,children:(0,G.jsx)(Pl,{className:`w-4 h-4 text-bambu-gray group-hover:text-bambu-green transition-colors`})})]})]},e.key)}),de.filter(e=>!(e.key in _)).length===0&&(0,G.jsx)(`p`,{className:`text-center text-bambu-gray py-4 text-sm`,children:r(w?`profiles.presets.noMatchingFields`:`profiles.presets.allFieldsAdded`)})]}),(0,G.jsx)(`div`,{className:`pt-3 mt-3 border-t border-bambu-dark-tertiary flex-shrink-0`,children:A?(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`input`,{type:`text`,value:O,onChange:e=>k(e.target.value),onKeyDown:e=>e.key===`Enter`&&fe(),placeholder:`custom_field_name`,className:`flex-1 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white font-mono text-sm placeholder-bambu-gray-dark focus:border-bambu-green focus:outline-none`,autoFocus:!0}),(0,G.jsx)(Q,{size:`sm`,onClick:fe,disabled:!O.trim(),children:(0,G.jsx)(Pl,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>{j(!1),k(``)},children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}):(0,G.jsxs)(`button`,{onClick:()=>j(!0),className:`w-full flex items-center justify-center gap-2 p-2 text-sm text-bambu-gray hover:text-white border border-dashed border-bambu-dark-tertiary hover:border-bambu-gray-dark rounded-lg transition-colors`,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),r(`profiles.presets.addCustomField`)]})})]}),(0,G.jsxs)(`div`,{className:`flex flex-col h-full overflow-hidden`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3 flex-shrink-0`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white`,children:r(`profiles.presets.yourOverrides`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:r(`profiles.templates.fieldsCount`,{count:Object.keys(_).filter(e=>e!==`inherits`).length})})]}),(0,G.jsxs)(`div`,{className:`flex-1 overflow-y-auto space-y-2 pr-2 min-h-0`,children:[Object.entries(_).filter(([e])=>e!==`inherits`).map(([e,t])=>{let n=ue.find(t=>t.key===e);return(0,G.jsxs)(`div`,{className:`p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white`,children:n?.label||e}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-dark`,children:e})]}),(0,G.jsx)(`button`,{onClick:()=>pe(e,void 0),className:`p-1 text-bambu-gray hover:text-red-600 dark:hover:text-red-400 transition-colors`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}),n?De(n):(0,G.jsx)(`input`,{type:`text`,value:String(t),onChange:t=>pe(e,t.target.value),className:`w-full px-3 py-1.5 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`})]},e)}),Object.keys(_).filter(e=>e!==`inherits`).length===0&&(0,G.jsxs)(`div`,{className:`text-center py-8 text-bambu-gray`,children:[(0,G.jsx)(fu,{className:`w-8 h-8 mx-auto mb-2 opacity-50`}),(0,G.jsx)(`p`,{className:`text-sm`,children:r(`profiles.presets.noOverridesYet`)}),(0,G.jsx)(`p`,{className:`text-xs mt-1`,children:r(`profiles.presets.clickFieldsToAdd`)})]})]}),Object.keys(_).filter(e=>e!==`inherits`).length>0&&(0,G.jsx)(`div`,{className:`pt-3 mt-3 border-t border-bambu-dark-tertiary flex-shrink-0`,children:(0,G.jsxs)(`button`,{onClick:()=>{F(!0),c(`common`)},className:`w-full flex items-center justify-center gap-2 p-2 text-sm text-bambu-gray hover:text-white border border-dashed border-bambu-dark-tertiary hover:border-bambu-gray-dark rounded-lg transition-colors`,children:[(0,G.jsx)(Kl,{className:`w-4 h-4`}),r(`profiles.presets.saveAsTemplate`)]})})]})]}),s===`json`&&(0,G.jsxs)(`div`,{className:`space-y-2`,children:[S&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-red-700 dark:text-red-400 text-sm`,children:[(0,G.jsx)(ys,{className:`w-4 h-4`}),S]}),(0,G.jsx)(`textarea`,{value:b,onChange:e=>_e(e.target.value),className:`w-full h-80 px-3 py-2 bg-bambu-dark border rounded-lg text-white text-xs font-mono focus:outline-none resize-none ${S?`border-red-500 focus:border-red-500`:`border-bambu-dark-tertiary focus:border-bambu-green`}`,spellCheck:!1}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:r(`profiles.presets.jsonTip`)})]})]}),(0,G.jsxs)(`div`,{className:`p-4 border-t border-bambu-dark-tertiary flex gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:e,className:`flex-1`,children:r(`common.cancel`)}),(0,G.jsxs)(Q,{onClick:()=>xe.mutate(),disabled:xe.isPending||!d.trim()||!o&&!p||!!S,className:`flex-1`,children:[xe.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):o?(0,G.jsx)(Kl,{className:`w-4 h-4`}):(0,G.jsx)(Pl,{className:`w-4 h-4`}),r(o?`common.save`:t?`common.duplicate`:`common.create`)]})]})]})})]})}function bKe({settings:e,lastSyncTime:t,onRefresh:n,isRefreshing:r,printers:i,hasPermission:a,t:o}){let[s,c]=(0,y.useState)(``),[l,u]=(0,y.useState)(`all`),[d,f]=(0,y.useState)(`all`),[p,m]=(0,y.useState)(`all`),[h,g]=(0,y.useState)(`all`),[_,v]=(0,y.useState)(`all`),[b,x]=(0,y.useState)(`all`),[S,C]=(0,y.useState)(null),[w,T]=(0,y.useState)(!1),[E,D]=(0,y.useState)(!1),[O,k]=(0,y.useState)(null),[A,j]=(0,y.useState)(null),[M,N]=(0,y.useState)(null),[P,F]=(0,y.useState)(!1),[I,L]=(0,y.useState)([null,null]),[R,z]=(0,y.useState)(!1),[B,V]=(0,y.useState)(null),ee=co(),te=(0,y.useMemo)(()=>[...e.filament.map(e=>({...e,type:`filament`})),...e.printer.map(e=>({...e,type:`printer`})),...e.process.map(e=>({...e,type:`process`}))].map(e=>({...e,meta:E5(e.name)})),[e]),ne=(0,y.useMemo)(()=>{let e=new Set,t=new Set,n=new Set;return te.forEach(r=>{r.meta.nozzle&&e.add(r.meta.nozzle),r.meta.filamentType&&t.add(r.meta.filamentType),r.meta.layerHeight&&n.add(r.meta.layerHeight)}),{printers:i.map(e=>({id:e.id.toString(),name:e.name})),nozzles:Array.from(e).sort((e,t)=>parseFloat(e)-parseFloat(t)),filaments:Array.from(t).sort(),layerHeights:Array.from(n).sort((e,t)=>parseFloat(e)-parseFloat(t))}},[te,i]),re=(0,y.useMemo)(()=>p===`all`?null:i.find(e=>e.id.toString()===p)?.model||null,[p,i]),ie=(0,y.useMemo)(()=>te.filter(e=>l===`all`||e.type===l).filter(e=>{if(d===`all`)return!0;let t=D5(e.setting_id);return d===`custom`?t:!t}).filter(e=>{if(p===`all`||!re)return!0;let t=e.meta.printer?.toLowerCase()||``,n=re.toLowerCase();return t.includes(n)||n.includes(t)}).filter(e=>h===`all`||e.meta.nozzle===h).filter(e=>_===`all`||e.meta.filamentType===_).filter(e=>b===`all`||e.meta.layerHeight===b).filter(e=>s===``||e.name.toLowerCase().includes(s.toLowerCase())).sort((e,t)=>e.name.localeCompare(t.name)),[te,l,d,p,re,h,_,b,s]),ae=e=>{if(P){let t=I[0]?.setting_id===e.setting_id,n=I[1]?.setting_id===e.setting_id;if(t)L([I[1],null]);else if(n)L([I[0],null]);else if(!I[0])L([e,null]);else if(I[1]){if(I[0].type!==e.type)return;L([I[0],e])}else{if(I[0].type!==e.type)return;L([I[0],e])}}else C(e)},oe=e=>{if(I[0]?.setting_id===e.setting_id)return 0;if(I[1]?.setting_id===e.setting_id)return 1},se=async e=>{try{let t=await Z.getCloudSettingDetail(e.setting_id);k({type:e.type===`process`?`print`:e.type,name:e.name,base_id:t.base_id||`GFSA00`,setting:t.setting||{}}),C(null)}catch(e){console.error(`Failed to fetch preset details for duplication:`,e)}},H=async e=>{try{ee.removeQueries({queryKey:[`cloudSettingDetail`,e.setting_id]});let t=await Z.getCloudSettingDetail(e.setting_id);j({type:e.type===`process`?`print`:e.type,name:e.name,base_id:t.base_id||`GFSA00`,setting:t.setting||{},setting_id:e.setting_id}),C(null)}catch(e){console.error(`Failed to fetch preset details for editing:`,e)}},ce=()=>{u(`all`),f(`all`),m(`all`),g(`all`),v(`all`),x(`all`),c(``)},le=l!==`all`||d!==`all`||p!==`all`||h!==`all`||_!==`all`||b!==`all`||s!==``,ue=e.filament.length+e.printer.length+e.process.length;return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`space-y-4 mb-6`,children:[(0,G.jsxs)(`div`,{className:`flex flex-col sm:flex-row gap-3`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:s,onChange:e=>c(e.target.value),placeholder:o(`profiles.cloudView.searchPlaceholder`),className:`w-full pl-10 pr-4 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray-dark focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 max-[550px]:flex-wrap max-[550px]:items-center`,children:[(0,G.jsxs)(Q,{variant:P?`primary`:`secondary`,onClick:()=>{P?(F(!1),L([null,null])):F(!0)},children:[(0,G.jsx)(Dc,{className:`w-4 h-4`}),o(P?`common.cancel`:`profiles.presets.compare`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>D(!0),disabled:!a(`cloud:auth`),title:a(`cloud:auth`)?void 0:o(`profiles.cloudView.noTemplatesPermission`),children:[(0,G.jsx)(gu,{className:`w-4 h-4`}),o(`profiles.cloudView.templates`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:n,disabled:r||!a(`cloud:auth`),title:a(`cloud:auth`)?void 0:o(`profiles.cloudView.noRefreshPermission`),children:[(0,G.jsx)(Vl,{className:`w-4 h-4 ${r?`animate-spin`:``}`}),o(`profiles.cloudView.refresh`)]}),(0,G.jsxs)(Q,{onClick:()=>T(!0),disabled:!a(`cloud:auth`),title:a(`cloud:auth`)?void 0:o(`profiles.cloudView.noCreatePermission`),children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),o(`profiles.cloudView.newPreset`)]})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2`,children:[(0,G.jsx)(Cc,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(O5,{label:o(`profiles.cloudView.filters.type`),value:l,options:[{value:`all`,label:o(`profiles.cloudView.filters.all`),count:ue},{value:`filament`,label:o(`profiles.cloudView.filters.filament`),count:e.filament.length},{value:`printer`,label:o(`profiles.cloudView.filters.printer`),count:e.printer.length},{value:`process`,label:o(`profiles.cloudView.filters.process`),count:e.process.length}],onChange:e=>u(e)}),(0,G.jsx)(O5,{label:o(`profiles.cloudView.filters.owner`),value:d,options:[{value:`all`,label:o(`profiles.cloudView.filters.all`)},{value:`custom`,label:o(`profiles.cloudView.filters.myPresets`)},{value:`builtin`,label:o(`profiles.cloudView.filters.builtIn`)}],onChange:e=>f(e)}),ne.printers.length>0&&(0,G.jsx)(O5,{label:o(`profiles.cloudView.filters.printer`),value:p,options:[{value:`all`,label:o(`profiles.cloudView.filters.all`)},...ne.printers.map(e=>({value:e.id,label:e.name}))],onChange:m}),ne.nozzles.length>0&&(0,G.jsx)(O5,{label:o(`profiles.cloudView.filters.nozzle`),value:h,options:[{value:`all`,label:o(`profiles.cloudView.filters.all`)},...ne.nozzles.map(e=>({value:e,label:e}))],onChange:g}),ne.filaments.length>0&&(l===`all`||l===`filament`)&&(0,G.jsx)(O5,{label:o(`profiles.cloudView.filters.filament`),value:_,options:[{value:`all`,label:o(`profiles.cloudView.filters.all`)},...ne.filaments.map(e=>({value:e,label:e}))],onChange:v}),ne.layerHeights.length>0&&(l===`all`||l===`process`)&&(0,G.jsx)(O5,{label:o(`profiles.cloudView.filters.layer`),value:b,options:[{value:`all`,label:o(`profiles.cloudView.filters.all`)},...ne.layerHeights.map(e=>({value:e,label:e}))],onChange:x}),le&&(0,G.jsx)(`button`,{onClick:ce,className:`px-3 py-2 text-sm text-bambu-gray hover:text-white transition-colors`,children:o(`profiles.cloudView.clearFilters`)})]})]}),P&&(0,G.jsx)(`div`,{className:`mb-4 p-3 bg-blue-500/10 border border-blue-500/30 rounded-lg`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-4`,children:[(0,G.jsx)(Dc,{className:`w-5 h-5 text-blue-600 dark:text-blue-400`}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:o(`profiles.cloudView.compareMode`)}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:I[0]?o(`profiles.cloudView.selectAnotherPreset`,{type:I[0].type}):o(`profiles.cloudView.clickTwoPresets`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`px-2 py-1 text-sm rounded truncate max-w-[200px] ${I[0]?`bg-blue-500/30 text-blue-700 dark:text-blue-300`:`bg-bambu-dark text-bambu-gray`}`,children:I[0]?I[0].name:o(`profiles.cloudView.selectFirst`)}),(0,G.jsx)(zo,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`span`,{className:`px-2 py-1 text-sm rounded truncate max-w-[200px] ${I[1]?`bg-blue-500/30 text-blue-700 dark:text-blue-300`:`bg-bambu-dark text-bambu-gray`}`,children:I[1]?I[1].name:o(`profiles.cloudView.selectSecond`)})]}),I[0]&&I[1]&&(0,G.jsxs)(Q,{size:`sm`,onClick:async()=>{try{let[e,t]=await Promise.all([Z.getCloudSettingDetail(I[0].setting_id),Z.getCloudSettingDetail(I[1].setting_id)]);V([e.setting||{},t.setting||{}]),z(!0)}catch{}},children:[(0,G.jsx)(Dc,{className:`w-4 h-4`}),o(`profiles.cloudView.compareNow`)]})]})]})}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-4 mb-4 text-sm text-bambu-gray`,children:[t&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(js,{className:`w-3 h-3`}),o(`profiles.cloudView.lastSynced`),` `,sp(t.toISOString(),`system`,o)]}),(0,G.jsx)(`span`,{children:o(`profiles.cloudView.showingCount`,{showing:ie.length,total:ue})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`span`,{className:`w-1.5 h-1.5 rounded-full bg-bambu-green`}),(0,G.jsxs)(`span`,{children:[`= `,o(`profiles.presets.myPreset`)]})]})]}),ie.length===0?(0,G.jsxs)(`div`,{className:`text-center py-16`,children:[(0,G.jsx)(qc,{className:`w-12 h-12 text-bambu-gray-dark mx-auto mb-4`}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:o(`profiles.cloudView.noPresetsFound`)}),le&&(0,G.jsx)(`button`,{onClick:ce,className:`mt-2 text-sm text-bambu-green hover:text-bambu-green-light`,children:o(`profiles.cloudView.clearFilters`)})]}):(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-3 gap-6`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3 px-1`,children:[(0,G.jsx)(Xs,{className:`w-4 h-4 text-amber-600 dark:text-amber-400`}),(0,G.jsx)(`h3`,{className:`text-sm font-medium text-bambu-gray`,children:o(`profiles.cloudView.columns.filament`)}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray-dark`,children:[`(`,ie.filter(e=>e.type===`filament`).length,`)`]})]}),(0,G.jsxs)(`div`,{className:`space-y-1 max-h-[calc(100vh-320px)] overflow-y-auto pr-1`,children:[ie.filter(e=>e.type===`filament`).map(e=>(0,G.jsx)(k5,{setting:e,onClick:()=>ae(e),onDuplicate:()=>se(e),compareMode:P,isCompareSelected:oe(e)!==void 0,compareIndex:oe(e),compareDisabled:P&&!!I[0]&&I[0].type!==e.type,t:o},e.setting_id)),ie.filter(e=>e.type===`filament`).length===0&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-dark px-3 py-2`,children:o(`profiles.cloudView.noFilamentPresets`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3 px-1`,children:[(0,G.jsx)(tu,{className:`w-4 h-4 text-blue-600 dark:text-blue-400`}),(0,G.jsx)(`h3`,{className:`text-sm font-medium text-bambu-gray`,children:o(`profiles.cloudView.columns.process`)}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray-dark`,children:[`(`,ie.filter(e=>e.type===`process`).length,`)`]})]}),(0,G.jsxs)(`div`,{className:`space-y-1 max-h-[calc(100vh-320px)] overflow-y-auto pr-1`,children:[ie.filter(e=>e.type===`process`).map(e=>(0,G.jsx)(k5,{setting:e,onClick:()=>ae(e),onDuplicate:()=>se(e),compareMode:P,isCompareSelected:oe(e)!==void 0,compareIndex:oe(e),compareDisabled:P&&!!I[0]&&I[0].type!==e.type,t:o},e.setting_id)),ie.filter(e=>e.type===`process`).length===0&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-dark px-3 py-2`,children:o(`profiles.cloudView.noProcessPresets`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3 px-1`,children:[(0,G.jsx)(Ll,{className:`w-4 h-4 text-purple-600 dark:text-purple-400`}),(0,G.jsx)(`h3`,{className:`text-sm font-medium text-bambu-gray`,children:o(`profiles.cloudView.columns.printer`)}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray-dark`,children:[`(`,ie.filter(e=>e.type===`printer`).length,`)`]})]}),(0,G.jsxs)(`div`,{className:`space-y-1 max-h-[calc(100vh-320px)] overflow-y-auto pr-1`,children:[ie.filter(e=>e.type===`printer`).map(e=>(0,G.jsx)(k5,{setting:e,onClick:()=>ae(e),onDuplicate:()=>se(e),compareMode:P,isCompareSelected:oe(e)!==void 0,compareIndex:oe(e),compareDisabled:P&&!!I[0]&&I[0].type!==e.type,t:o},e.setting_id)),ie.filter(e=>e.type===`printer`).length===0&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-dark px-3 py-2`,children:o(`profiles.cloudView.noPrinterPresets`)})]})]})]}),S&&(0,G.jsx)(mKe,{setting:S,onClose:()=>C(null),onDeleted:()=>C(null),onDuplicate:()=>se(S),onEdit:()=>H(S),hasPermission:a,t:o}),(w||O||A||M)&&(0,G.jsx)(yKe,{onClose:()=>{T(!1),k(null),j(null),N(null)},initialData:A||O||(M?{type:M.type,name:``,base_id:``,setting:M.setting}:void 0),allPresets:e,t:o}),E&&(0,G.jsx)(_Ke,{onClose:()=>D(!1),onApply:e=>{N({type:e.type,setting:e.settings}),D(!1)},t:o}),R&&B&&I[0]&&I[1]&&(0,G.jsx)(vKe,{onClose:()=>{z(!1),V(null)},leftPreset:B[0],rightPreset:B[1],leftLabel:I[0].name,rightLabel:I[1].name,t:o})]})}function xKe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),{hasPermission:r}=jd(),[i,a]=(0,y.useState)(`cloud`),[o,s]=(0,y.useState)(),{data:c,isLoading:l}=K({queryKey:[`cloudStatus`],queryFn:Z.getCloudStatus}),{data:u=[]}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:d,isLoading:f,refetch:p,dataUpdatedAt:m}=K({queryKey:[`cloudSettings`],queryFn:()=>Z.getCloudSettings(),enabled:!!c?.is_authenticated,retry:!1,staleTime:1e3*60*5});(0,y.useEffect)(()=>{m&&s(new Date(m))},[m]);let h=q({mutationFn:Z.cloudLogout,onSuccess:()=>{t.invalidateQueries({queryKey:[`cloudStatus`]}),t.removeQueries({queryKey:[`cloudSettings`]}),n(e(`profiles.toast.loggedOut`))}});return l?(0,G.jsx)(`div`,{className:`p-4 md:p-8 flex items-center justify-center min-h-[400px]`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):(0,G.jsxs)(`div`,{className:`p-4 md:p-8`,children:[(0,G.jsxs)(`div`,{className:`mb-6`,children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(Ps,{className:`w-7 h-7 text-bambu-green`}),e(`profiles.title`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:e(`profiles.subtitle`)})]}),(0,G.jsxs)(`div`,{className:`flex border-b border-bambu-dark-tertiary mb-6`,children:[(0,G.jsxs)(`button`,{onClick:()=>a(`cloud`),className:`flex items-center gap-2 px-4 py-3 text-sm font-medium transition-colors border-b-2 -mb-px ${i===`cloud`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-white border-transparent`}`,children:[(0,G.jsx)(Ps,{className:`w-4 h-4`}),e(`profiles.tabs.bambuCloud`)]}),(0,G.jsxs)(`button`,{onClick:()=>a(`orca_cloud`),className:`flex items-center gap-2 px-4 py-3 text-sm font-medium transition-colors border-b-2 -mb-px ${i===`orca_cloud`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-white border-transparent`}`,children:[(0,G.jsx)(Ps,{className:`w-4 h-4`}),e(`profiles.tabs.orcaCloud`)]}),(0,G.jsxs)(`button`,{onClick:()=>a(`local`),className:`flex items-center gap-2 px-4 py-3 text-sm font-medium transition-colors border-b-2 -mb-px ${i===`local`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-white border-transparent`}`,children:[(0,G.jsx)(Nc,{className:`w-4 h-4`}),e(`profiles.tabs.local`)]}),(0,G.jsxs)(`button`,{onClick:()=>a(`kprofiles`),className:`flex items-center gap-2 px-4 py-3 text-sm font-medium transition-colors border-b-2 -mb-px ${i===`kprofiles`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-white border-transparent`}`,children:[(0,G.jsx)(wc,{className:`w-4 h-4`}),e(`profiles.tabs.kprofiles`)]})]}),i===`cloud`&&(0,G.jsxs)(G.Fragment,{children:[c?.is_authenticated&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-3 mb-6 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full bg-bambu-green animate-pulse`}),(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[e(`profiles.connectedAs`),` `,(0,G.jsx)(`span`,{className:`text-white`,children:c.email}),c.region&&(0,G.jsx)(`span`,{className:`ml-2 px-2 py-0.5 text-xs rounded bg-bambu-dark-tertiary text-bambu-gray`,children:c.region===`china`?e(`profiles.login.regionChina`):e(`profiles.login.regionGlobal`)})]})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>h.mutate(),disabled:h.isPending||!r(`cloud:auth`),title:r(`cloud:auth`)?void 0:e(`profiles.noLogoutPermission`),children:[(0,G.jsx)(rl,{className:`w-4 h-4`}),e(`profiles.logout`)]})]}),c?.sign_in_expired&&(0,G.jsxs)(`div`,{className:`flex items-start gap-3 p-3 mb-6 rounded-lg border border-yellow-500/40 bg-yellow-500/10`,children:[(0,G.jsx)(Iu,{className:`w-5 h-5 shrink-0 text-yellow-400 mt-0.5`}),(0,G.jsxs)(`div`,{className:`text-sm`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`profiles.signInExpiredTitle`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`profiles.signInExpiredBody`)})]})]}),c?.is_authenticated?f?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-16`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):d?(0,G.jsx)(bKe,{settings:d,lastSyncTime:o,onRefresh:()=>p(),isRefreshing:f,printers:u,hasPermission:r,t:e}):(0,G.jsxs)(`div`,{className:`text-center py-16`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray mb-4`,children:e(`profiles.failedToLoad`)}),(0,G.jsx)(Q,{onClick:()=>p(),children:e(`profiles.retry`)})]}):(0,G.jsx)(fKe,{onSuccess:()=>{t.invalidateQueries({queryKey:[`cloudStatus`]})},t:e})]}),i===`orca_cloud`&&(0,G.jsx)(uKe,{}),i===`local`&&(0,G.jsx)(aKe,{}),i===`kprofiles`&&(0,G.jsx)(eKe,{}),(0,G.jsx)(pKe,{})]})}function SKe(e,t){let n=(t||``).toUpperCase().replace(/[- ]/g,``),r=n.includes(`X1`),i=n.includes(`P1`),a=n.includes(`A1MINI`),o=n.includes(`A1`)&&!a,s=n.includes(`H2D`),c=n.includes(`H2C`),l=n.includes(`H2S`),u=s||c||l,d=n.includes(`P2S`),f=n.includes(`X2D`),p=d||f;switch(e){case`Lubricate Steel Rods`:return p?`https://wiki.bambulab.com/en/p2s/maintenance/lubricate-x-y-z-axis`:null;case`Clean Steel Rods`:return p?`https://wiki.bambulab.com/en/p2s/maintenance/lubricate-x-y-z-axis`:null;case`Lubricate Linear Rails`:return a?`https://wiki.bambulab.com/en/a1-mini/maintenance/lubricate-y-axis`:o?`https://wiki.bambulab.com/en/a1/maintenance/lubricate-y-axis`:u?`https://wiki.bambulab.com/en/h2/maintenance/x-axis-lubrication`:null;case`Clean Nozzle/Hotend`:return r||i?`https://wiki.bambulab.com/en/x1/troubleshooting/nozzle-clog`:a||o?`https://wiki.bambulab.com/en/a1-mini/troubleshooting/nozzle-clog`:u?`https://wiki.bambulab.com/en/h2/maintenance/nozzl-cold-pull-maintenance-and-cleaning`:p?`https://wiki.bambulab.com/en/p2s/maintenance/cold-pull-maintenance-hotend`:`https://wiki.bambulab.com/en/x1/troubleshooting/nozzle-clog`;case`Check Belt Tension`:return r?`https://wiki.bambulab.com/en/x1/maintenance/belt-tension`:i?`https://wiki.bambulab.com/en/p1/maintenance/p1p-maintenance`:a?`https://wiki.bambulab.com/en/a1-mini/maintenance/belt_tension`:o?`https://wiki.bambulab.com/en/a1/maintenance/belt_tension`:s?`https://wiki.bambulab.com/en/h2/maintenance/belt-tension`:c?`https://wiki.bambulab.com/en/h2c/maintenance/belt-tension`:l?`https://wiki.bambulab.com/en/h2s/maintenance/belt-tension`:p?`https://wiki.bambulab.com/en/p2s/maintenance/belt-tension`:`https://wiki.bambulab.com/en/x1/maintenance/belt-tension`;case`Clean Carbon Rods`:return r||i?`https://wiki.bambulab.com/en/general/carbon-rods-clearance`:null;case`Clean Linear Rails`:return a?`https://wiki.bambulab.com/en/a1-mini/maintenance/lubricate-y-axis`:o?`https://wiki.bambulab.com/en/a1/maintenance/lubricate-y-axis`:u?`https://wiki.bambulab.com/en/h2/maintenance/x-axis-lubrication`:null;case`Clean Build Plate`:return`https://wiki.bambulab.com/en/filament-acc/acc/pei-plate-clean-guide`;case`Check PTFE Tube`:return r||i?`https://wiki.bambulab.com/en/x1/maintenance/replace-ptfe-tube`:a||o?`https://wiki.bambulab.com/en/a1-mini/maintenance/ptfe-tube`:s?`https://wiki.bambulab.com/en/h2/maintenance/replace-ptfe-tube-on-h2d-printer`:l?`https://wiki.bambulab.com/en/h2s/maintenance/replace-ptfe-tube-on-h2s-printer`:c?`https://wiki.bambulab.com/en/h2/maintenance/replace-ptfe-tube-on-h2d-printer`:`https://wiki.bambulab.com/en/x1/maintenance/replace-ptfe-tube`;case`Replace HEPA Filter`:case`HEPA Filter`:case`Replace Carbon Filter`:case`Carbon Filter`:return u?`https://wiki.bambulab.com/en/h2/maintenance/replace-smoke-purifier-air-filte`:`https://wiki.bambulab.com/en/x1/maintenance/replace-carbon-filter`;case`Lubricate Left Nozzle Rail`:case`Left Nozzle Rail`:return u?`https://wiki.bambulab.com/en/h2/maintenance/x-axis-lubrication`:null;default:return null}}var j5={Droplet:Xs,Flame:mc,Ruler:Gl,Sparkles:gu,Square:yu,Cable:ts,Wrench:ed,Calendar:as,Timer:Mu,Cog:Rs,Fan:ac,Zap:rd,Wind:Qu,Thermometer:ju,Layers:qc,Box:Zo,Target:Eu,RefreshCw:Vl,Settings:nu,Filter:Cc,CircleDot:Cs};function M5(e){return e&&j5[e]||ed}function N5(e,t,n){if(t===`days`){if(e<1)return n?n(`common.today`):`Today`;if(e===1)return n?n(`maintenance.day`):`1 day`;if(e<7){let t=Math.round(e);return n?n(`maintenance.days`,{count:t}):`${t} days`}if(e<180){let t=Math.round(e/7);return t===1?n?n(`maintenance.week`):`1 week`:n?n(`maintenance.weeks`,{count:t}):`${t} weeks`}let t=Math.round(e/30);return t===1?n?n(`maintenance.month`):`1 month`:n?n(`maintenance.months`,{count:t}):`${t} months`}else{if(e<1)return`${Math.round(e*60)}m`;if(e<24)return`${e<10?e.toFixed(1):Math.round(e)}h`;let t=e/24;if(t<7)return`${t<2?t.toFixed(1):Math.round(t)}d`;let n=t/7;return n<12?`${n<2?n.toFixed(1):Math.round(n)}w`:`${Math.round(n/4)}mo`}}function P5(e,t,n){return t===`days`?e===1?n?n(`maintenance.day`):`1 day`:e===7?n?n(`maintenance.week`):`1 week`:e===14?n?n(`maintenance.weeks`,{count:2}):`2 weeks`:e===30?n?n(`maintenance.month`):`1 month`:e===60?n?n(`maintenance.months`,{count:2}):`2 months`:e===90?n?n(`maintenance.months`,{count:3}):`3 months`:e===180?n?n(`maintenance.months`,{count:6}):`6 months`:e===365?n?n(`maintenance.year`):`1 year`:n?n(`maintenance.days`,{count:e}):`${e} days`:`${e}h`}function CKe({item:e,onPerform:t,onToggle:n,hasPermission:r,t:i}){let a=M5(e.maintenance_type_icon),o=e.interval_type||`hours`,s=(()=>{if(o===`days`){let t=e.days_since_maintenance??0;return Math.max(0,Math.min(100,t/e.interval_hours*100))}return Math.max(0,Math.min(100,(e.interval_hours-e.hours_until_due)/e.interval_hours*100))})(),c=()=>e.enabled?e.is_due?`text-red-700 dark:text-red-400`:e.is_warning?`text-amber-700 dark:text-amber-400`:`text-bambu-green`:`text-bambu-gray`;return(0,G.jsx)(`div`,{className:`rounded-xl border p-4 transition-all ${e.enabled?e.is_due?`bg-red-500/5 border-red-500/20`:e.is_warning?`bg-amber-500/5 border-amber-500/20`:`bg-bambu-dark-secondary border-bambu-dark-tertiary`:`bg-bambu-dark-secondary/50`}`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3 max-[550px]:flex-wrap`,children:[(0,G.jsxs)(`div`,{className:`relative p-2.5 rounded-lg shrink-0 ${e.is_due?`bg-red-500/20`:e.is_warning?`bg-amber-500/20`:e.enabled?`bg-bambu-dark`:`bg-bambu-dark/50`}`,children:[(0,G.jsx)(a,{className:`w-5 h-5 ${c()}`}),e.enabled&&(e.is_due||e.is_warning)&&(0,G.jsx)(`span`,{className:`absolute -top-1 -right-1 w-2.5 h-2.5 rounded-full ${e.is_due?`bg-red-500`:`bg-amber-500`} animate-pulse`})]}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`h3`,{className:`font-medium truncate ${e.enabled?`text-white`:`text-bambu-gray`}`,children:e.maintenance_type_name}),o===`days`&&(0,G.jsx)(`span`,{title:i(`maintenance.timeBasedInterval`),children:(0,G.jsx)(as,{className:`w-3.5 h-3.5 text-bambu-gray shrink-0`})}),(()=>{let t=e.maintenance_type_wiki_url||SKe(e.maintenance_type_name,e.printer_model);return t?(0,G.jsx)(`a`,{href:t,target:`_blank`,rel:`noopener noreferrer`,className:`text-bambu-gray hover:text-bambu-green transition-colors shrink-0`,title:i(`maintenance.viewDocumentation`),onClick:e=>e.stopPropagation(),children:(0,G.jsx)(nc,{className:`w-3.5 h-3.5`})}):null})()]}),(0,G.jsx)(`div`,{className:`mt-2 mb-1.5`,children:(0,G.jsx)(`div`,{className:`w-full h-1.5 bg-bambu-dark rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full transition-all duration-500 ${e.enabled?e.is_due?`bg-red-500`:e.is_warning?`bg-amber-500`:`bg-bambu-green`:`bg-bambu-gray/30`}`,style:{width:`${s}%`}})})}),(0,G.jsxs)(`div`,{className:`text-xs flex items-center gap-1 ${c()}`,children:[e.is_due&&(0,G.jsx)(Iu,{className:`w-3 h-3`}),e.is_warning&&!e.is_due&&(0,G.jsx)(js,{className:`w-3 h-3`}),!e.is_due&&!e.is_warning&&e.enabled&&(0,G.jsx)(fs,{className:`w-3 h-3`}),(()=>{if(!e.enabled)return i(`common.disabled`);if(o===`days`){let t=e.days_until_due??0;return e.is_due?i(`maintenance.overdueBy`,{duration:N5(Math.abs(t),`days`,i)}):e.is_warning?i(`maintenance.dueIn`,{duration:N5(t,`days`,i)}):i(`maintenance.timeLeft`,{duration:N5(t,`days`,i)})}else return e.is_due?i(`maintenance.overdueBy`,{duration:N5(Math.abs(e.hours_until_due),`hours`,i)}):e.is_warning?i(`maintenance.dueIn`,{duration:N5(e.hours_until_due,`hours`,i)}):i(`maintenance.timeLeft`,{duration:N5(e.hours_until_due,`hours`,i)})})()]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 shrink-0 max-[550px]:w-full max-[550px]:justify-end max-[550px]:mt-1`,children:[(0,G.jsx)(`span`,{title:r(`maintenance:update`)?void 0:i(`maintenance.noPermissionUpdate`),children:(0,G.jsx)(hU,{checked:e.enabled,onChange:t=>n(e.id,t),disabled:!r(`maintenance:update`)})}),(0,G.jsxs)(Q,{size:`sm`,variant:e.is_due?`primary`:`secondary`,onClick:()=>t(e.id),disabled:!e.enabled||!r(`maintenance:update`),title:r(`maintenance:update`)?void 0:i(`maintenance.noPermissionPerform`),className:`!px-3`,children:[(0,G.jsx)(Ul,{className:`w-3.5 h-3.5`}),i(`common.reset`)]})]})]})})}function wKe({overview:e,onPerform:t,onToggle:n,onSetHours:r,hasPermission:i,t:a}){let[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(e.total_print_hours.toFixed(1)),f=[...e.maintenance_items].sort((e,t)=>e.is_due&&!t.is_due?-1:!e.is_due&&t.is_due?1:e.is_warning&&!t.is_warning?-1:!e.is_warning&&t.is_warning?1:e.maintenance_type_id-t.maintenance_type_id),p=f.find(e=>e.enabled&&(e.is_due||e.is_warning)),m=()=>{let t=parseFloat(u);!isNaN(t)&&t>=0&&(r(e.printer_id,t),l(!1))};return(0,G.jsxs)(Ld,{className:`overflow-hidden`,children:[(0,G.jsxs)(`div`,{className:`p-5`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-4`,children:[(0,G.jsx)(`h2`,{className:`text-xl font-semibold text-white`,children:e.printer_name}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[e.due_count>0&&(0,G.jsxs)(`span`,{className:`px-2.5 py-1 bg-red-100 text-red-700 dark:bg-red-500/20 dark:text-red-400 text-xs font-medium rounded-full flex items-center gap-1.5`,children:[(0,G.jsx)(Iu,{className:`w-3 h-3`}),a(`maintenance.overdueCount`,{count:e.due_count})]}),e.warning_count>0&&(0,G.jsxs)(`span`,{className:`px-2.5 py-1 bg-amber-100 text-amber-700 dark:bg-amber-500/20 dark:text-amber-400 text-xs font-medium rounded-full flex items-center gap-1.5`,children:[(0,G.jsx)(js,{className:`w-3 h-3`}),a(`maintenance.dueSoonCount`,{count:e.warning_count})]}),e.due_count===0&&e.warning_count===0&&(0,G.jsxs)(`span`,{className:`px-2.5 py-1 bg-bambu-green/20 text-bambu-green text-xs font-medium rounded-full flex items-center gap-1.5`,children:[(0,G.jsx)(fs,{className:`w-3 h-3`}),a(`maintenance.allGood`)]})]})]}),(0,G.jsxs)(`button`,{onClick:()=>s(!o),className:`flex items-center gap-1.5 px-3 py-1.5 text-sm text-bambu-gray hover:text-white hover:bg-bambu-dark rounded-lg transition-colors`,children:[o?(0,G.jsx)(gs,{className:`w-4 h-4`}):(0,G.jsx)(ps,{className:`w-4 h-4`}),a(o?`common.collapse`:`common.expand`)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-6 mt-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 bg-bambu-dark/50 rounded-lg`,children:(0,G.jsx)(Mu,{className:`w-4 h-4 text-bambu-gray`})}),c?(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,value:u,onChange:e=>d(e.target.value),onKeyDown:e=>{e.key===`Enter`&&m(),e.key===`Escape`&&l(!1)},className:`w-24 px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm`,min:`0`,step:`1`,autoFocus:!0}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:a(`common.hours`)}),(0,G.jsx)(Q,{size:`sm`,onClick:m,children:a(`common.save`)}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>l(!1),children:a(`common.cancel`)})]}):(0,G.jsxs)(`button`,{onClick:()=>{i(`maintenance:update`)&&(d(Math.round(e.total_print_hours).toString()),l(!0))},className:`group ${i(`maintenance:update`)?``:`cursor-not-allowed opacity-60`}`,title:i(`maintenance:update`)?void 0:a(`maintenance.noPermissionEditHours`),children:[(0,G.jsxs)(`div`,{className:`text-sm font-medium text-white ${i(`maintenance:update`)?`group-hover:text-bambu-green`:``} transition-colors flex items-center gap-1`,children:[Math.round(e.total_print_hours),` `,a(`common.hours`),(0,G.jsx)(Dl,{className:`w-3 h-3 text-bambu-gray ${i(`maintenance:update`)?`group-hover:text-bambu-green`:``}`})]}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray`,children:a(`maintenance.totalPrintTime`)})]})]}),(0,G.jsx)(`div`,{className:`w-px h-10 bg-bambu-dark-tertiary`}),p&&(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg ${p.is_due?`bg-red-500/20`:`bg-amber-500/20`}`,children:(0,G.jsx)(M5(p.maintenance_type_icon),{className:`w-4 h-4 ${p.is_due?`text-red-600 dark:text-red-400`:`text-amber-600 dark:text-amber-400`}`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-sm font-medium ${p.is_due?`text-red-700 dark:text-red-400`:`text-amber-700 dark:text-amber-400`}`,children:p.maintenance_type_name}),(0,G.jsx)(`div`,{className:`text-xs ${p.is_due?`text-red-700/80 dark:text-red-400/70`:`text-amber-700/80 dark:text-amber-400/70`}`,children:p.is_due?a(`common.overdue`):a(`maintenance.dueSoon`)})]})]})]})]}),o&&(0,G.jsx)(zd,{className:`pt-0 border-t border-bambu-dark-tertiary`,children:(0,G.jsx)(`div`,{className:`grid grid-cols-1 lg:grid-cols-2 gap-3 pt-4`,children:f.map(e=>(0,G.jsx)(CKe,{item:e,onPerform:t,onToggle:n,hasPermission:i,t:a},e.id))})})]})}function TKe({overview:e,types:t,onUpdateInterval:n,onAddType:r,onUpdateType:i,onDeleteType:a,onRestoreDefaults:o,isRestoringDefaults:s,onAssignType:c,onRemoveItem:l,hasPermission:u,t:d}){let[f,p]=(0,y.useState)(null),[m,h]=(0,y.useState)(``),[g,_]=(0,y.useState)(`hours`),[v,b]=(0,y.useState)(!1),[x,S]=(0,y.useState)(``),[C,w]=(0,y.useState)(`100`),[T,E]=(0,y.useState)(`hours`),[D,O]=(0,y.useState)(`Wrench`),[k,A]=(0,y.useState)(``),[j,M]=(0,y.useState)(new Set),[N,P]=(0,y.useState)(null),[F,I]=(0,y.useState)(null),L=(0,y.useMemo)(()=>e?e.map(e=>({id:e.printer_id,name:e.printer_name})):[],[e]),R=t=>e?e.filter(e=>e.maintenance_items.some(e=>e.maintenance_type_id===t)).map(e=>({printerId:e.printer_id,printerName:e.printer_name,itemId:e.maintenance_items.find(e=>e.maintenance_type_id===t)?.id})):[],z=t=>{if(!e)return[];let n=new Set(R(t).map(e=>e.printerId));return L.filter(e=>!n.has(e.id))},[B,V]=(0,y.useState)(null),[ee,te]=(0,y.useState)(``),[ne,re]=(0,y.useState)(``),[ie,ae]=(0,y.useState)(`hours`),[oe,se]=(0,y.useState)(`Wrench`),[H,ce]=(0,y.useState)(``),le=e=>{V(e),te(e.name),re(e.default_interval_hours.toString()),ae(e.interval_type||`hours`),se(e.icon||`Wrench`),ce(e.wiki_url||``)},ue=()=>{B&&ee.trim()&&parseFloat(ne)>0&&(i(B.id,{name:ee.trim(),default_interval_hours:parseFloat(ne),interval_type:ie,icon:oe,wiki_url:H.trim()||null}),V(null))},de=(e,t,r)=>{let i=parseFloat(m);!isNaN(i)&&i>0&&n(e,{custom_interval_hours:Math.abs(i-t)<.01?null:i,custom_interval_type:g===r?null:g}),p(null)},fe=e=>{e.preventDefault(),x.trim()&&parseFloat(C)>0&&j.size>0&&(r({name:x.trim(),default_interval_hours:parseFloat(C),interval_type:T,icon:D,wiki_url:k.trim()||null},Array.from(j)),S(``),w(`100`),E(`hours`),A(``),M(new Set),b(!1))},pe=e=>{M(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},me=e?.map(e=>({printerId:e.printer_id,printerName:e.printer_name,items:e.maintenance_items.sort((e,t)=>e.maintenance_type_id-t.maintenance_type_id)})).sort((e,t)=>e.printerName.localeCompare(t.printerName))||[],he=t.filter(e=>e.is_system),ge=t.filter(e=>!e.is_system);return(0,G.jsxs)(`div`,{className:`space-y-8`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:d(`maintenance.maintenanceTypes`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:d(`maintenance.maintenanceTypesDescription`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:o,disabled:!u(`maintenance:delete`)||s,title:u(`maintenance:delete`)?void 0:d(`maintenance.noPermissionDeleteTypes`),children:d(`maintenance.restoreDefaults`)}),(0,G.jsxs)(Q,{onClick:()=>b(!v),disabled:!u(`maintenance:create`),title:u(`maintenance:create`)?void 0:d(`maintenance.noPermissionEditTypes`),children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),d(`maintenance.addCustomType`)]})]})]}),v&&(0,G.jsx)(Ld,{className:`mb-6`,children:(0,G.jsx)(zd,{className:`py-4`,children:(0,G.jsxs)(`form`,{onSubmit:fe,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 lg:grid-cols-4 gap-4`,children:[(0,G.jsxs)(`div`,{className:`lg:col-span-2`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1.5`,children:d(`common.name`)}),(0,G.jsx)(`input`,{type:`text`,value:x,onChange:e=>S(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,placeholder:d(`maintenance.exampleName`),autoFocus:!0})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1.5`,children:d(`maintenance.intervalType`)}),(0,G.jsxs)(`select`,{value:T,onChange:e=>{E(e.target.value),e.target.value===`days`?w(`30`):w(`100`)},className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`hours`,children:d(`maintenance.printHours`)}),(0,G.jsx)(`option`,{value:`days`,children:d(`maintenance.calendarDays`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1.5`,children:d(`maintenance.intervalValue`,{type:T===`days`?d(`maintenance.calendarDays`).toLowerCase():d(`common.hours`)})}),(0,G.jsx)(`input`,{type:`number`,value:C,onChange:e=>w(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,min:`1`})]})]}),(0,G.jsx)(`div`,{className:`mt-4 flex items-end justify-between`,children:(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1.5`,children:d(`maintenance.icon`)}),(0,G.jsx)(`div`,{className:`flex gap-1`,children:Object.keys(j5).map(e=>{let t=j5[e];return(0,G.jsx)(`button`,{type:`button`,onClick:()=>O(e),className:`p-2 rounded-lg transition-colors ${D===e?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(t,{className:`w-4 h-4`})},e)})})]})}),(0,G.jsxs)(`div`,{className:`mt-4`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1.5`,children:d(`maintenance.documentationLink`)}),(0,G.jsx)(`input`,{type:`url`,value:k,onChange:e=>A(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,placeholder:`https://wiki.bambulab.com/...`})]}),(0,G.jsxs)(`div`,{className:`mt-4`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1.5`,children:d(`maintenance.assignToPrinters`)}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-2`,children:L.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>pe(e.id),className:`px-3 py-1.5 rounded-lg text-sm transition-colors ${j.has(e.id)?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary`}`,children:e.name},e.id))}),j.size===0&&(0,G.jsx)(`p`,{className:`text-xs text-orange-700 dark:text-orange-400 mt-1`,children:d(`maintenance.selectAtLeastOnePrinter`)})]}),(0,G.jsxs)(`div`,{className:`mt-4 flex justify-end gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:()=>{b(!1),M(new Set)},children:d(`common.cancel`)}),(0,G.jsx)(Q,{type:`submit`,disabled:!x.trim()||j.size===0,children:d(`maintenance.addType`)})]})]})})}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 lg:grid-cols-3 gap-3`,children:[he.map(e=>{let t=M5(e.icon),n=e.interval_type||`hours`;return(0,G.jsx)(`div`,{className:`bg-bambu-dark-secondary rounded-xl p-4 border border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2.5 bg-bambu-dark rounded-lg`,children:(0,G.jsx)(t,{className:`w-5 h-5 text-bambu-gray`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-sm font-medium text-white truncate`,children:e.name}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray mt-0.5 flex items-center gap-1`,children:[n===`days`?(0,G.jsx)(as,{className:`w-3 h-3`}):(0,G.jsx)(Mu,{className:`w-3 h-3`}),P5(e.default_interval_hours,n,d)]})]}),(0,G.jsx)(`button`,{onClick:()=>{u(`maintenance:delete`)&&I(e)},disabled:!u(`maintenance:delete`),title:u(`maintenance:delete`)?void 0:d(`maintenance.noPermissionDeleteTypes`),className:`p-2 rounded-lg hover:bg-bambu-dark text-bambu-gray hover:text-red-600 dark:hover:text-red-400 transition-colors ${u(`maintenance:delete`)?``:`opacity-50 cursor-not-allowed`}`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})},e.id)}),ge.map(e=>{let t=M5(e.icon),n=e.interval_type||`hours`;if(B?.id===e.id)return(0,G.jsx)(`div`,{className:`bg-bambu-dark-secondary rounded-xl p-4 border border-bambu-green`,children:(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsx)(`input`,{type:`text`,value:ee,onChange:e=>te(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,placeholder:d(`common.name`),autoFocus:!0}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(`select`,{value:ie,onChange:e=>ae(e.target.value),className:`flex-1 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`hours`,children:d(`maintenance.printHours`)}),(0,G.jsx)(`option`,{value:`days`,children:d(`maintenance.calendarDays`)})]}),(0,G.jsx)(`input`,{type:`number`,value:ne,onChange:e=>re(e.target.value),className:`w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,min:`1`})]}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1`,children:Object.keys(j5).map(e=>{let t=j5[e];return(0,G.jsx)(`button`,{type:`button`,onClick:()=>se(e),className:`p-1.5 rounded transition-colors ${oe===e?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,children:(0,G.jsx)(t,{className:`w-3.5 h-3.5`})},e)})}),(0,G.jsx)(`input`,{type:`url`,value:H,onChange:e=>ce(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,placeholder:d(`maintenance.documentationLink`)}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Q,{size:`sm`,onClick:ue,disabled:!ee.trim(),children:d(`common.save`)}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>V(null),children:d(`common.cancel`)})]})]})},e.id);let r=R(e.id),i=z(e.id),o=N===e.id;return(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl p-4 border border-bambu-green/30`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2.5 bg-bambu-green/20 rounded-lg`,children:(0,G.jsx)(t,{className:`w-5 h-5 text-bambu-green`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-sm font-medium text-white truncate`,children:e.name}),(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-bambu-green/20 text-bambu-green text-[10px] font-medium rounded`,children:d(`maintenance.custom`)})]}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray mt-0.5 flex items-center gap-1`,children:[n===`days`?(0,G.jsx)(as,{className:`w-3 h-3`}):(0,G.jsx)(Mu,{className:`w-3 h-3`}),P5(e.default_interval_hours,n,d)]})]}),(0,G.jsxs)(`button`,{onClick:()=>P(o?null:e.id),className:`px-2 py-1 rounded-lg border transition-colors flex items-center gap-1 ${r.length>0?`border-bambu-green/50 bg-bambu-green/10 text-bambu-green hover:bg-bambu-green/20`:`border-orange-300 bg-orange-50 text-orange-700 hover:bg-orange-100 dark:border-orange-400/50 dark:bg-orange-400/10 dark:text-orange-400 dark:hover:bg-orange-400/20`}`,title:d(`maintenance.printersAssignedClick`,{count:r.length}),children:[(0,G.jsx)(Ll,{className:`w-3 h-3`}),(0,G.jsx)(`span`,{className:`text-xs font-medium`,children:r.length}),(0,G.jsx)(ps,{className:`w-3 h-3 transition-transform ${o?`rotate-180`:``}`})]}),(0,G.jsx)(`button`,{onClick:()=>le(e),disabled:!u(`maintenance:update`),title:u(`maintenance:update`)?void 0:d(`maintenance.noPermissionEditTypes`),className:`p-2 rounded-lg hover:bg-bambu-dark text-bambu-gray hover:text-white transition-colors ${u(`maintenance:update`)?``:`opacity-50 cursor-not-allowed`}`,children:(0,G.jsx)(Dl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>{confirm(d(`maintenance.deleteTypeConfirm`,{name:e.name}))&&a(e.id)},disabled:!u(`maintenance:delete`),title:u(`maintenance:delete`)?void 0:d(`maintenance.noPermissionDeleteTypes`),className:`p-2 rounded-lg hover:bg-bambu-dark text-bambu-gray hover:text-red-600 dark:hover:text-red-400 transition-colors ${u(`maintenance:delete`)?``:`opacity-50 cursor-not-allowed`}`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]}),o&&(0,G.jsxs)(`div`,{className:`mt-3 pt-3 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:d(`maintenance.assignedToPrinters`)}),r.length===0?(0,G.jsx)(`p`,{className:`text-xs text-orange-700 dark:text-orange-400`,children:d(`maintenance.noPrintersAssigned`)}):(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1 mb-2`,children:r.map(e=>(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 px-2 py-1 bg-bambu-dark rounded text-xs text-white`,children:[e.printerName,(0,G.jsx)(`button`,{onClick:()=>e.itemId&&l(e.itemId),disabled:!u(`maintenance:delete`),title:u(`maintenance:delete`)?d(`maintenance.removeFromPrinter`):d(`maintenance.noPermissionRemovePrinter`),className:`ml-1 ${u(`maintenance:delete`)?`hover:text-red-600 dark:hover:text-red-400`:`opacity-50 cursor-not-allowed`}`,children:`×`})]},e.printerId))}),i.length>0&&(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-1`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray mr-1`,children:d(`maintenance.addPrinterShort`)}),i.map(t=>(0,G.jsxs)(`button`,{onClick:()=>c(t.id,e.id),disabled:!u(`maintenance:create`),title:u(`maintenance:create`)?void 0:d(`maintenance.noPermissionAssignPrinter`),className:`px-2 py-1 bg-bambu-dark rounded text-xs transition-colors ${u(`maintenance:create`)?`hover:bg-bambu-green/20 text-bambu-gray hover:text-bambu-green`:`opacity-50 cursor-not-allowed text-bambu-gray`}`,children:[`+ `,t.name]},t.id))]})]})]},e.id)})]})]}),me.length>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:d(`maintenance.intervalOverrides`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:d(`maintenance.intervalOverridesDescription`)})]}),(0,G.jsx)(`div`,{className:`space-y-4`,children:me.map(e=>(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`py-4`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white mb-3`,children:e.printerName}),(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 lg:grid-cols-3 gap-2`,children:e.items.map(e=>{let n=M5(e.maintenance_type_icon),r=t.find(t=>t.id===e.maintenance_type_id),i=r?.default_interval_hours||e.interval_hours,a=r?.interval_type||`hours`,o=e.interval_type||`hours`,s=f===e.id;return(0,G.jsxs)(`div`,{className:`flex items-center gap-2 p-2.5 bg-bambu-dark rounded-lg`,children:[(0,G.jsx)(n,{className:`w-4 h-4 text-bambu-gray shrink-0`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray flex-1 truncate`,children:e.maintenance_type_name}),s?(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[g===`days`?(0,G.jsx)(as,{className:`w-3.5 h-3.5 text-bambu-gray shrink-0`}):(0,G.jsx)(Mu,{className:`w-3.5 h-3.5 text-bambu-gray shrink-0`}),(0,G.jsxs)(`select`,{value:g,onChange:e=>_(e.target.value),className:`px-1.5 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-xs`,children:[(0,G.jsx)(`option`,{value:`hours`,children:d(`maintenance.printHours`)}),(0,G.jsx)(`option`,{value:`days`,children:d(`maintenance.calendarDays`)})]}),(0,G.jsx)(`input`,{type:`number`,value:m,onChange:e=>h(e.target.value),onKeyDown:t=>{t.key===`Enter`&&de(e.id,i,a),t.key===`Escape`&&p(null)},className:`w-16 px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-xs`,min:`1`}),(0,G.jsx)(Q,{size:`sm`,onClick:()=>de(e.id,i,a),children:`OK`})]}):(0,G.jsxs)(`button`,{onClick:()=>{u(`maintenance:update`)&&(p(e.id),h(e.interval_hours.toString()),_(o))},disabled:!u(`maintenance:update`),title:u(`maintenance:update`)?void 0:d(`maintenance.noPermissionEditIntervals`),className:`px-2 py-1 bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded text-xs font-medium text-white transition-colors flex items-center gap-1 ${u(`maintenance:update`)?`hover:bg-bambu-dark-secondary hover:border-bambu-green`:`opacity-50 cursor-not-allowed`}`,children:[o===`days`?(0,G.jsx)(as,{className:`w-3 h-3`}):(0,G.jsx)(Mu,{className:`w-3 h-3`}),P5(e.interval_hours,o,d),(0,G.jsx)(Dl,{className:`w-3 h-3 text-bambu-gray`})]})]},e.id)})})]})},e.printerId))})]}),me.length===0&&(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`text-center py-12`,children:[(0,G.jsx)(js,{className:`w-12 h-12 mx-auto mb-4 text-bambu-gray/30`}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:d(`common.noPrinters`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray/70 mt-1`,children:d(`maintenance.intervalOverridesDescription`)})]})}),F&&(0,G.jsx)(rf,{title:d(`maintenance.deleteSystemTypeTitle`),message:d(`maintenance.deleteSystemTypeMessage`,{name:F.name}),confirmText:d(`common.delete`),cancelText:d(`common.cancel`),variant:`danger`,cancelVariant:`primary`,cardClassName:`bg-red-950/70 border border-red-800/70`,onConfirm:()=>{a(F.id),I(null)},onCancel:()=>I(null)})]})}function EKe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),{hasPermission:r}=jd(),[i,a]=(0,y.useState)(`status`),{data:o,isLoading:s}=K({queryKey:[`maintenanceOverview`],queryFn:Z.getMaintenanceOverview}),{data:c}=K({queryKey:[`maintenanceTypes`],queryFn:Z.getMaintenanceTypes}),l=q({mutationFn:({id:e,notes:t})=>Z.performMaintenance(e,t),onSuccess:()=>{t.invalidateQueries({queryKey:[`maintenanceOverview`]}),t.invalidateQueries({queryKey:[`maintenanceSummary`]}),n(e(`maintenance.maintenanceComplete`))},onError:e=>{n(e.message,`error`)}}),u=q({mutationFn:({id:e,data:t})=>Z.updateMaintenanceItem(e,t),onSuccess:()=>{t.invalidateQueries({queryKey:[`maintenanceOverview`]})},onError:e=>{n(e.message,`error`)}}),d=q({mutationFn:({id:e,data:t})=>Z.updateMaintenanceType(e,t),onSuccess:()=>{t.invalidateQueries({queryKey:[`maintenanceTypes`]}),t.invalidateQueries({queryKey:[`maintenanceOverview`]}),n(e(`maintenance.typeUpdated`))},onError:e=>{n(e.message,`error`)}}),f=q({mutationFn:Z.deleteMaintenanceType,onSuccess:()=>{t.invalidateQueries({queryKey:[`maintenanceTypes`]}),t.invalidateQueries({queryKey:[`maintenanceOverview`]}),n(e(`maintenance.typeDeleted`))},onError:e=>{n(e.message,`error`)}}),p=q({mutationFn:Z.restoreDefaultMaintenanceTypes,onSuccess:r=>{t.invalidateQueries({queryKey:[`maintenanceTypes`]}),t.invalidateQueries({queryKey:[`maintenanceOverview`]}),n(e(`maintenance.defaultsRestored`,{count:r.restored}))},onError:e=>{n(e.message,`error`)}}),m=q({mutationFn:({printerId:e,hours:t})=>Z.setPrinterHours(e,t),onSuccess:()=>{t.invalidateQueries({queryKey:[`maintenanceOverview`]}),t.invalidateQueries({queryKey:[`maintenanceSummary`]}),n(e(`maintenance.printHoursUpdated`))},onError:e=>{n(e.message,`error`)}}),h=q({mutationFn:({printerId:e,typeId:t})=>Z.assignMaintenanceType(e,t),onSuccess:()=>{t.invalidateQueries({queryKey:[`maintenanceOverview`]}),n(e(`maintenance.printerAssigned`))},onError:e=>{n(e.message,`error`)}}),g=q({mutationFn:Z.removeMaintenanceItem,onSuccess:()=>{t.invalidateQueries({queryKey:[`maintenanceOverview`]}),n(e(`maintenance.printerRemoved`))},onError:e=>{n(e.message,`error`)}}),_=e=>{l.mutate({id:e})},v=(e,t)=>{u.mutate({id:e,data:{enabled:t}})},b=(e,t)=>{m.mutate({printerId:e,hours:t})};if(s)return(0,G.jsx)(`div`,{className:`p-4 md:p-8 flex justify-center`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})});let x=o?.reduce((e,t)=>e+t.due_count,0)||0,S=o?.reduce((e,t)=>e+t.warning_count,0)||0;return(0,G.jsxs)(`div`,{className:`p-4 md:p-8`,children:[(0,G.jsxs)(`div`,{className:`mb-6`,children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(ed,{className:`w-7 h-7 text-bambu-green`}),e(`maintenance.title`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:i===`status`?(0,G.jsxs)(G.Fragment,{children:[x>0&&(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:e(`maintenance.dueCount`,{count:x})}),x>0&&S>0&&` · `,S>0&&(0,G.jsx)(`span`,{className:`text-amber-700 dark:text-amber-400`,children:e(`maintenance.warningCount`,{count:S})}),x===0&&S===0&&(0,G.jsx)(`span`,{className:`text-bambu-green`,children:e(`maintenance.allOk`)})]}):e(`maintenance.configureSettings`)})]}),(0,G.jsxs)(`div`,{className:`flex gap-1 mb-6 border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`button`,{onClick:()=>a(`status`),className:`px-4 py-2 text-sm font-medium border-b-2 -mb-px transition-colors ${i===`status`?`text-bambu-green border-bambu-green`:`text-bambu-gray border-transparent hover:text-white`}`,children:e(`maintenance.statusTab`)}),(0,G.jsx)(`button`,{onClick:()=>a(`settings`),className:`px-4 py-2 text-sm font-medium border-b-2 -mb-px transition-colors ${i===`settings`?`text-bambu-green border-bambu-green`:`text-bambu-gray border-transparent hover:text-white`}`,children:e(`maintenance.settingsTab`)})]}),i===`status`?(0,G.jsx)(`div`,{className:`space-y-6`,children:o&&o.length>0?[...o].sort((e,t)=>{let n=e.due_count*10+e.warning_count,r=t.due_count*10+t.warning_count;return n===r?e.printer_name.localeCompare(t.printer_name):r-n}).map(t=>(0,G.jsx)(wKe,{overview:t,onPerform:_,onToggle:v,onSetHours:b,hasPermission:r,t:e},t.printer_id)):(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`text-center py-16`,children:[(0,G.jsx)(ed,{className:`w-16 h-16 mx-auto mb-4 text-bambu-gray/30`}),(0,G.jsx)(`p`,{className:`text-lg font-medium text-white mb-2`,children:e(`common.noPrinters`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`maintenance.configureSettings`)})]})})}):(0,G.jsx)(TKe,{overview:o,types:c||[],onUpdateInterval:(e,t)=>u.mutate({id:e,data:t}),onAddType:async(r,i)=>{let a=await Z.createMaintenanceType(r);for(let e of i)await Z.assignMaintenanceType(e,a.id);t.invalidateQueries({queryKey:[`maintenanceTypes`]}),t.invalidateQueries({queryKey:[`maintenanceOverview`]}),n(e(`maintenance.typeUpdated`))},onUpdateType:(e,t)=>d.mutate({id:e,data:t}),onDeleteType:e=>f.mutate(e),onRestoreDefaults:()=>p.mutate(),isRestoringDefaults:p.isPending,onAssignType:(e,t)=>h.mutate({printerId:e,typeId:t}),onRemoveItem:e=>g.mutate(e),hasPermission:r,t:e})]})}var DKe=[`#ef4444`,`#f97316`,`#eab308`,`#22c55e`,`#06b6d4`,`#3b82f6`,`#8b5cf6`,`#ec4899`,`#6b7280`];function OKe({project:e,onClose:t,onSave:n,isLoading:r,currencySymbol:i,t:a}){let[o,s]=(0,y.useState)(e?.name||``),[c,l]=(0,y.useState)(e?.description||``),[u,d]=(0,y.useState)(e?.color||DKe[0]),[f,p]=(0,y.useState)(e?.target_count?.toString()||``),[m,h]=(0,y.useState)(e?.target_parts_count?.toString()||``),[g,_]=(0,y.useState)(e?.target_sets?.toString()||``),[v,b]=(0,y.useState)(e?.status||`active`),[x,S]=(0,y.useState)(e?.tags||``),[C,w]=(0,y.useState)(e?.due_date?.split(`T`)[0]||``),[T,E]=(0,y.useState)(e?.priority||`normal`),[D,O]=(0,y.useState)(e?.budget?.toString()||``),[k,A]=(0,y.useState)(e?.url||``),[j,M]=(0,y.useState)(null),[N,P]=(0,y.useState)(e?.parent_id??null),F=co(),{data:I}=K({queryKey:[`projects`,void 0],queryFn:()=>Z.getProjects()}),L=gAe(I||[],e?.id),[R,z]=(0,y.useState)(e?.cover_image_filename||null),B=(0,y.useRef)(null),[V,ee]=(0,y.useState)(!1),[te,ne]=(0,y.useState)(0);return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg w-full max-w-md border border-bambu-dark-tertiary flex flex-col max-h-[calc(100vh-2rem)]`,children:[(0,G.jsx)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary flex-shrink-0`,children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:a(e?`projects.editProject`:`projects.newProject`)})}),(0,G.jsxs)(`form`,{onSubmit:t=>{t.preventDefault();let r=k.trim();if(r&&!/^https?:\/\//i.test(r)){M(a(`projects.urlInvalid`));return}M(null),n({name:o.trim(),description:c.trim()||void 0,color:u,target_count:f?parseInt(f,10):void 0,target_parts_count:m?parseInt(m,10):void 0,target_sets:e?g?parseInt(g,10):null:g?parseInt(g,10):void 0,tags:e?x.trim()||null:x.trim()||void 0,due_date:e?C||null:C||void 0,priority:T,budget:D.trim()?parseFloat(D):null,url:e?r||null:r||void 0,parent_id:e?N??0:N??void 0,...e&&{status:v}})},className:`flex flex-col flex-1 min-h-0`,children:[(0,G.jsxs)(`div`,{className:`p-4 space-y-4 overflow-y-auto flex-1`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`common.name`)}),(0,G.jsx)(`input`,{type:`text`,value:o,onChange:e=>s(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:a(`projects.namePlaceholder`),required:!0})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`common.description`)}),(0,G.jsx)(`textarea`,{value:c,onChange:e=>l(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green resize-none`,placeholder:a(`projects.descriptionPlaceholder`),rows:2})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projects.urlLabel`)}),(0,G.jsx)(`input`,{type:`url`,value:k,onChange:e=>{A(e.target.value),j&&M(null)},className:`w-full bg-bambu-dark border rounded px-3 py-2 text-white placeholder-bambu-gray focus:outline-none ${j?`border-red-500 focus:border-red-500`:`border-bambu-dark-tertiary focus:border-bambu-green`}`,placeholder:a(`projects.urlPlaceholder`),maxLength:2048}),j&&(0,G.jsx)(`p`,{className:`text-xs text-red-600 dark:text-red-400 mt-1`,children:j})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projects.parentLabel`)}),(0,G.jsxs)(`select`,{value:N??``,onChange:e=>P(e.target.value?parseInt(e.target.value,10):null),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white focus:outline-none focus:border-bambu-green`,children:[(0,G.jsx)(`option`,{value:``,children:a(`projects.parentNone`)}),L.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:a(`projects.parentHint`)})]}),e&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projects.coverImageLabel`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-20 h-20 rounded bg-bambu-dark border border-bambu-dark-tertiary overflow-hidden flex items-center justify-center flex-shrink-0`,children:R?(0,G.jsx)(`img`,{src:Z.getProjectCoverImageUrl(e.id,te),alt:a(`projects.coverImageAlt`),className:`w-full h-full object-cover`}):(0,G.jsx)(Vc,{className:`w-6 h-6 text-bambu-gray`})}),(0,G.jsxs)(`div`,{className:`flex flex-col gap-2`,children:[(0,G.jsx)(`input`,{ref:B,type:`file`,accept:`image/jpeg,image/png,image/gif,image/webp`,onChange:async t=>{let n=t.target.files?.[0];if(!(!n||!e)){ee(!0);try{z((await Z.uploadProjectCoverImage(e.id,n)).filename),ne(e=>e+1),F.invalidateQueries({queryKey:[`projects`]})}catch{}finally{ee(!1),B.current&&(B.current.value=``)}}},className:`hidden`}),(0,G.jsxs)(Q,{type:`button`,variant:`secondary`,onClick:()=>B.current?.click(),disabled:V,children:[V?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Bu,{className:`w-4 h-4 mr-1`}),a(R?`projects.coverImageReplace`:`projects.coverImageUpload`)]}),R&&(0,G.jsxs)(Q,{type:`button`,variant:`secondary`,onClick:async()=>{if(e){ee(!0);try{await Z.deleteProjectCoverImage(e.id),z(null),ne(e=>e+1),F.invalidateQueries({queryKey:[`projects`]})}finally{ee(!1)}}},disabled:V,children:[(0,G.jsx)(td,{className:`w-4 h-4 mr-1`}),a(`projects.coverImageRemove`)]})]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projects.color`)}),(0,G.jsx)(`div`,{className:`flex gap-2 flex-wrap`,children:DKe.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>d(e),className:`w-8 h-8 rounded-full transition-transform ${u===e?`ring-2 ring-white ring-offset-2 ring-offset-bambu-dark-secondary scale-110`:``}`,style:{backgroundColor:e}},e))})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projects.targetPlates`)}),(0,G.jsx)(`input`,{type:`number`,value:f,onChange:e=>p(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:a(`projects.targetPlatesPlaceholder`),min:`1`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:a(`projects.targetPlatesHelp`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projects.targetParts`)}),(0,G.jsx)(`input`,{type:`number`,value:m,onChange:e=>h(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:a(`projects.targetPartsPlaceholder`),min:`1`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:a(`projects.targetPartsHelp`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projects.targetSets`)}),(0,G.jsx)(`input`,{type:`number`,value:g,onChange:e=>_(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:a(`projects.targetSetsPlaceholder`),min:`1`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:a(`projects.targetSetsHelp`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projects.tagsLabel`)}),(0,G.jsx)(`input`,{type:`text`,value:x,onChange:e=>S(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:a(`projects.tagsPlaceholder`)})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projects.dueDate`)}),(0,G.jsx)(`input`,{type:`date`,value:C,onChange:e=>w(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white focus:outline-none focus:border-bambu-green`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projects.priority`)}),(0,G.jsxs)(`select`,{value:T,onChange:e=>E(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white focus:outline-none focus:border-bambu-green`,children:[(0,G.jsx)(`option`,{value:`low`,children:a(`projects.priorityLow`)}),(0,G.jsx)(`option`,{value:`normal`,children:a(`projects.priorityNormal`)}),(0,G.jsx)(`option`,{value:`high`,children:a(`projects.priorityHigh`)}),(0,G.jsx)(`option`,{value:`urgent`,children:a(`projects.priorityUrgent`)})]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projectDetail.cost.budget`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`span`,{className:`absolute left-3 top-1/2 -translate-y-1/2 text-bambu-gray pointer-events-none`,children:i}),(0,G.jsx)(`input`,{type:`number`,step:`0.01`,min:`0`,value:D,onChange:e=>O(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded pl-8 pr-3 py-2 text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:`0.00`})]})]}),e&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`common.status`)}),(0,G.jsxs)(`select`,{value:v,onChange:e=>b(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white focus:outline-none focus:border-bambu-green`,children:[(0,G.jsx)(`option`,{value:`active`,children:a(`projects.statusActive`)}),(0,G.jsx)(`option`,{value:`completed`,children:a(`projects.statusCompleted`)}),(0,G.jsx)(`option`,{value:`archived`,children:a(`projects.statusArchived`)})]})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 p-4 border-t border-bambu-dark-tertiary flex-shrink-0`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:t,children:a(`common.cancel`)}),(0,G.jsx)(Q,{type:`submit`,disabled:!o.trim()||r,children:r?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):a(e?`common.save`:`projects.create`)})]})]})]})})}function kKe({projectId:e,altText:t}){let n=(0,y.useRef)(null),[r,i]=(0,y.useState)(!1),[a,o]=(0,y.useState)(null);return(0,G.jsxs)(`div`,{ref:n,className:`relative flex-shrink-0`,onMouseEnter:()=>{if(!n.current)return;let e=n.current.getBoundingClientRect(),t=window.innerWidth,r=window.innerHeight,a=e.right+8;a+384>t-8&&(a=e.left-384-8);let s=e.top;s+384>r-8&&(s=r-384-8),s<8&&(s=8),o({left:a,top:s}),i(!0)},onMouseLeave:()=>i(!1),onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-lg overflow-hidden bg-bambu-dark border border-bambu-dark-tertiary`,children:(0,G.jsx)(`img`,{src:Z.getProjectCoverImageUrl(e),alt:t,className:`w-full h-full object-cover`,loading:`lazy`})}),r&&a&&(0,At.createPortal)((0,G.jsx)(`div`,{className:`fixed z-[100] w-96 h-96 rounded-lg overflow-hidden border border-bambu-dark-tertiary shadow-2xl bg-bambu-dark pointer-events-none`,style:{left:a.left,top:a.top},"aria-hidden":`true`,children:(0,G.jsx)(`img`,{src:Z.getProjectCoverImageUrl(e),alt:``,className:`w-full h-full object-contain`,loading:`lazy`})}),document.body)]})}function AKe({project:e,parentName:t,onClick:n,onEdit:r,onDelete:i,hasPermission:a,t:o}){let s=e.target_count?Math.round(e.archive_count/e.target_count*100):0,c=e.target_parts_count?Math.round(e.completed_count/e.target_parts_count*100):0,l=e.status===`completed`,u=e.status===`archived`,[d,f]=(0,y.useState)(!1),p=l?{icon:Ss,color:`text-bambu-green`,bg:`bg-bambu-green/10`}:u?{icon:Po,color:`text-bambu-gray`,bg:`bg-bambu-gray/10`}:e.queue_count>0?{icon:js,color:`text-blue-600 dark:text-blue-400`,bg:`bg-blue-50 dark:bg-blue-400/10`}:{icon:gc,color:`text-bambu-gray`,bg:`bg-bambu-gray/10`};return(0,G.jsxs)(`div`,{className:`group relative bg-gradient-to-br from-bambu-card to-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary hover:border-bambu-green/50 hover:shadow-lg hover:shadow-bambu-green/5 transition-all duration-300 cursor-pointer overflow-hidden`,onClick:n,children:[(0,G.jsx)(`div`,{className:`absolute top-0 left-0 w-1.5 h-full`,style:{backgroundColor:e.color||`#6b7280`,boxShadow:`0 0 12px ${e.color||`#6b7280`}40`}}),(0,G.jsxs)(`div`,{className:`p-5 pl-6`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between mb-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 min-w-0 flex-1`,children:[e.cover_image_filename?(0,G.jsx)(kKe,{projectId:e.id,altText:o(`projects.coverImageAlt`)}):(0,G.jsx)(`div`,{className:`p-2 rounded-lg ${p.bg} flex-shrink-0`,children:(0,G.jsx)(p.icon,{className:`w-5 h-5 ${p.color}`})}),(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-wrap`,children:[(0,G.jsx)(`h3`,{className:`font-semibold text-white truncate`,children:e.name}),e.url&&(0,G.jsx)(`a`,{href:e.url,target:`_blank`,rel:`noopener noreferrer`,onClick:e=>e.stopPropagation(),title:e.url,"aria-label":o(`projects.openExternalUrl`),className:`inline-flex items-center justify-center w-6 h-6 rounded bg-bambu-dark border border-bambu-dark-tertiary text-bambu-green hover:bg-bambu-green/10 hover:border-bambu-green transition-colors flex-shrink-0`,children:(0,G.jsx)(nc,{className:`w-3.5 h-3.5`})}),e.target_parts_count?(0,G.jsxs)(`span`,{className:`text-xs px-2 py-0.5 rounded-full whitespace-nowrap font-medium ${c>=100?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark text-bambu-gray`}`,children:[e.completed_count,`/`,e.target_parts_count,` `,o(`projects.parts`)]}):e.target_count?(0,G.jsxs)(`span`,{className:`text-xs px-2 py-0.5 rounded-full whitespace-nowrap font-medium ${s>=100?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark text-bambu-gray`}`,children:[e.archive_count,`/`,e.target_count,` `,o(`projects.plates`)]}):e.completed_count>0?(0,G.jsxs)(`span`,{className:`text-xs px-2 py-0.5 rounded-full whitespace-nowrap font-medium bg-bambu-dark text-bambu-gray`,children:[e.completed_count,` `,o(`projects.parts`)]}):null,l&&(0,G.jsx)(`span`,{className:`text-xs bg-bambu-green/20 text-bambu-green px-2 py-0.5 rounded-full whitespace-nowrap`,children:o(`projects.done`)}),u&&(0,G.jsx)(`span`,{className:`text-xs bg-bambu-gray/20 text-bambu-gray px-2 py-0.5 rounded-full whitespace-nowrap`,children:o(`projects.statusArchived`)}),e.child_count>0&&(0,G.jsxs)(`span`,{className:`text-xs bg-bambu-dark text-bambu-gray px-2 py-0.5 rounded-full whitespace-nowrap inline-flex items-center gap-1`,title:o(`projects.subProjectCount`,{count:e.child_count}),children:[(0,G.jsx)(bc,{className:`w-3 h-3`}),e.child_count]})]}),t&&(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-1 flex items-center gap-1`,children:[(0,G.jsx)(qc,{className:`w-3 h-3 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,children:o(`projects.partOf`,{name:t})})]}),e.description&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray/70 mt-1 line-clamp-1`,children:e.description}),e.archives&&e.archives.length>0&&(()=>{let t=e.archives.map(e=>e.filament_type).filter(Boolean).flatMap(e=>e.split(`,`).map(e=>e.trim())).filter(Boolean),n=[...new Set(t)],r=e.archives.map(e=>e.filament_color).filter(Boolean).flatMap(e=>e.split(`,`).map(e=>e.trim())).filter(e=>e.startsWith(`#`)||/^[0-9A-Fa-f]{6}$/.test(e)),i=[...new Set(r)];return n.length===0&&i.length===0?null:(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mt-1.5`,children:[n.slice(0,3).map(e=>(0,G.jsx)(`span`,{className:`text-[10px] px-1.5 py-0.5 bg-bambu-dark text-bambu-gray rounded`,children:e},e)),i.length>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-0.5`,children:[i.slice(0,5).map(e=>(0,G.jsx)(`div`,{className:`w-3 h-3 rounded-full border border-black/20`,style:{backgroundColor:e.startsWith(`#`)?e:`#${e}`},title:e},e)),i.length>5&&(0,G.jsxs)(`span`,{className:`text-[10px] text-bambu-gray ml-0.5`,children:[`+`,i.length-5]})]})]})})()]})]}),(0,G.jsxs)(`div`,{className:`relative`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(`button`,{className:`p-1.5 rounded-lg hover:bg-bambu-dark text-bambu-gray hover:text-white transition-colors can-hover:opacity-0 group-hover:opacity-100 focus-visible:opacity-100`,onClick:()=>f(!d),children:(0,G.jsx)(Qs,{className:`w-4 h-4`})}),d&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-10`,onClick:()=>f(!1)}),(0,G.jsxs)(`div`,{className:`absolute right-0 top-8 z-20 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl py-1 min-w-[120px]`,children:[(0,G.jsxs)(`button`,{className:`w-full px-3 py-2 text-left text-sm flex items-center gap-2 ${a(`projects:update`)?`text-white hover:bg-bambu-dark`:`text-bambu-gray cursor-not-allowed`}`,onClick:()=>{a(`projects:update`)&&(r(),f(!1))},disabled:!a(`projects:update`),title:a(`projects:update`)?void 0:o(`projects.noEditPermission`),children:[(0,G.jsx)(Dl,{className:`w-4 h-4`}),o(`common.edit`)]}),(0,G.jsxs)(`button`,{className:`w-full px-3 py-2 text-left text-sm flex items-center gap-2 ${a(`projects:delete`)?`text-red-600 dark:text-red-400 hover:bg-bambu-dark`:`text-bambu-gray cursor-not-allowed`}`,onClick:()=>{a(`projects:delete`)&&(i(),f(!1))},disabled:!a(`projects:delete`),title:a(`projects:delete`)?void 0:o(`projects.noDeletePermission`),children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),o(`common.delete`)]})]})]})]})]}),(0,G.jsx)(`div`,{className:`mb-4`,children:e.target_count||e.target_parts_count?(0,G.jsxs)(`div`,{className:`space-y-3`,children:[e.target_count&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-xs mb-1`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:o(`projects.plates`)}),(0,G.jsxs)(`span`,{className:s>=100?`text-bambu-green font-medium`:`text-white`,children:[e.archive_count,` / `,e.target_count]})]}),(0,G.jsx)(`div`,{className:`h-2 bg-bambu-dark/80 rounded-full overflow-hidden backdrop-blur-sm`,children:(0,G.jsx)(`div`,{className:`h-full transition-all duration-500 ease-out rounded-full relative`,style:{width:`${Math.min(s,100)}%`,background:s>=100?`linear-gradient(90deg, #22c55e, #4ade80)`:`linear-gradient(90deg, ${e.color||`#6b7280`}, ${e.color||`#6b7280`}cc)`,boxShadow:`0 0 8px ${s>=100?`#22c55e`:e.color||`#6b7280`}60`}})})]}),e.target_parts_count&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-xs mb-1`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:o(`projects.parts`)}),(0,G.jsxs)(`span`,{className:c>=100?`text-bambu-green font-medium`:`text-white`,children:[e.completed_count,` / `,e.target_parts_count]})]}),(0,G.jsx)(`div`,{className:`h-2 bg-bambu-dark/80 rounded-full overflow-hidden backdrop-blur-sm`,children:(0,G.jsx)(`div`,{className:`h-full transition-all duration-500 ease-out rounded-full relative`,style:{width:`${Math.min(c,100)}%`,background:c>=100?`linear-gradient(90deg, #22c55e, #4ade80)`:`linear-gradient(90deg, ${e.color||`#6b7280`}, ${e.color||`#6b7280`}cc)`,boxShadow:`0 0 8px ${c>=100?`#22c55e`:e.color||`#6b7280`}60`}})})]}),e.failed_count>0&&(0,G.jsxs)(`div`,{className:`text-xs text-red-600 dark:text-red-400`,children:[e.failed_count,` `,o(`projects.failed`)]})]}):e.completed_count>0||e.failed_count>0?(0,G.jsxs)(`div`,{className:`flex items-center gap-4 text-xs`,children:[e.completed_count>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-bambu-gray`,children:[(0,G.jsx)(Po,{className:`w-3.5 h-3.5`}),(0,G.jsxs)(`span`,{children:[e.completed_count,` `,o(`projects.completed`)]})]}),e.failed_count>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-red-600 dark:text-red-400`,children:[(0,G.jsx)(Iu,{className:`w-3.5 h-3.5`}),(0,G.jsxs)(`span`,{children:[e.failed_count,` `,o(`projects.failed`)]})]}),e.queue_count>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-blue-600 dark:text-blue-400`,children:[(0,G.jsx)(js,{className:`w-3.5 h-3.5`}),(0,G.jsxs)(`span`,{children:[e.queue_count,` `,o(`projects.inQueue`)]})]})]}):(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray/60 italic`,children:o(`projects.noPrintsYet`)})}),e.archives&&e.archives.length>0&&(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsx)(`div`,{className:`grid grid-cols-4 gap-1.5`,children:e.archives.slice(0,4).map(e=>(0,G.jsxs)(`div`,{className:`relative aspect-square rounded-lg bg-bambu-dark overflow-hidden border border-bambu-dark-tertiary`,title:e.print_name||`Unknown`,children:[e.thumbnail_path?(0,G.jsx)(`img`,{src:Z.getArchiveThumbnail(e.id),alt:e.print_name||``,className:`w-full h-full object-cover`}):(0,G.jsx)(`div`,{className:`w-full h-full flex items-center justify-center text-bambu-gray/50`,children:(0,G.jsx)(Sl,{className:`w-6 h-6`})}),e.status===`failed`&&(0,G.jsx)(`div`,{className:`absolute inset-0 bg-red-500/40 flex items-center justify-center`,children:(0,G.jsx)(Iu,{className:`w-4 h-4 text-white`})})]},e.id))}),e.archive_count>4&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1.5 text-center`,children:o(`common.more`,{count:e.archive_count-4})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between pt-3 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-4 text-xs text-bambu-gray`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,title:o(`projects.printJobs`),children:[(0,G.jsx)(qc,{className:`w-3.5 h-3.5 text-blue-600 dark:text-blue-400`}),(0,G.jsxs)(`span`,{children:[e.archive_count,` `,o(`projects.plates`)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,title:o(`projects.partsPrinted`),children:[(0,G.jsx)(Sl,{className:`w-3.5 h-3.5 text-bambu-green`}),(0,G.jsxs)(`span`,{children:[e.completed_count,` `,o(`projects.parts`)]})]}),e.failed_count>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-red-600 dark:text-red-400`,title:o(`projects.failedParts`),children:[(0,G.jsx)(Iu,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`span`,{children:e.failed_count})]}),e.queue_count>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-yellow-600 dark:text-yellow-400`,title:o(`projects.inQueue`),children:[(0,G.jsx)(Qc,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`span`,{children:e.queue_count})]})]}),(0,G.jsx)(ms,{className:`w-4 h-4 text-bambu-gray/50 group-hover:text-bambu-gray transition-colors`})]})]})]})}function jKe(){let{t:e}=U(),t=or(),n=co(),{showToast:r}=Gd(),{hasPermission:i}=jd(),[a,o]=(0,y.useState)(!1),[s,c]=(0,y.useState)(),[l,u]=(0,y.useState)(`active`),[d,f]=(0,y.useState)(null),[p,m]=(0,y.useState)(()=>localStorage.getItem(`projects-collapse-subprojects`)===`true`),[h,g]=(0,y.useState)({}),_=()=>{let e=!p;m(e),g({}),localStorage.setItem(`projects-collapse-subprojects`,String(e))},{data:v}=K({queryKey:[`settings`],queryFn:Z.getSettings}),b=Pf(v?.currency||`USD`),{data:x,isLoading:S}=K({queryKey:[`projects`,l===`all`?void 0:l],queryFn:()=>Z.getProjects(l===`all`?void 0:l)}),{data:C}=K({queryKey:[`projects`,void 0],queryFn:()=>Z.getProjects()}),w=new Map((C||[]).map(e=>[e.id,e.name])),T=x||[],E=new Set(T.map(e=>e.id)),D=new Map;for(let e of T)if(e.parent_id!==null&&E.has(e.parent_id)){let t=D.get(e.parent_id)||[];t.push(e),D.set(e.parent_id,t)}let O=new Set,k=e=>{if(!O.has(e)){O.add(e);for(let t of D.get(e)||[])k(t.id)}},A=[];for(let e of T)e.parent_id!==null&&E.has(e.parent_id)||(A.push(e),k(e.id));for(let e of T)O.has(e.id)||(A.push(e),k(e.id));let j=(t,n,r)=>{let a=(0,G.jsx)(AKe,{project:t,parentName:n===0&&t.parent_id!==null?w.get(t.parent_id):void 0,onClick:()=>ee(t),onEdit:()=>V(t),onDelete:()=>te(t.id),hasPermission:i,t:e}),o=new Set(r).add(t.id),s=(D.get(t.id)||[]).filter(e=>!o.has(e.id));if(s.length===0)return(0,G.jsx)(`div`,{children:a},t.id);let c=h[t.id]??!p;return(0,G.jsxs)(`div`,{className:c?`col-span-full space-y-4`:`space-y-4`,children:[a,(0,G.jsxs)(`div`,{className:`ml-4 md:ml-8 pl-4 md:pl-6 border-l-2 rounded-l space-y-4`,style:{borderColor:t.color||`#6b7280`},children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>g(e=>({...e,[t.id]:!c})),"aria-expanded":c,title:e(c?`projects.collapseSubProjects`:`projects.expandSubProjects`),className:`text-xs uppercase tracking-wide text-bambu-gray hover:text-white transition-colors flex items-center gap-1.5 max-w-full min-w-0`,children:[c?(0,G.jsx)(ps,{className:`w-3.5 h-3.5 flex-shrink-0`}):(0,G.jsx)(ms,{className:`w-3.5 h-3.5 flex-shrink-0`}),(0,G.jsx)(bc,{className:`w-3.5 h-3.5 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,children:e(`projects.subProjectsOf`,{name:t.name})}),(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 rounded-full bg-bambu-dark normal-case tracking-normal flex-shrink-0`,children:s.length})]}),c&&(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-8`,children:s.map(e=>j(e,n+1,o))})]})]},t.id)},M=q({mutationFn:e=>Z.createProject(e),onSuccess:()=>{n.invalidateQueries({queryKey:[`projects`]}),o(!1),r(e(`projects.toast.created`),`success`)},onError:e=>{r(e.message,`error`)}}),N=q({mutationFn:({id:e,data:t})=>Z.updateProject(e,t),onSuccess:()=>{n.invalidateQueries({queryKey:[`projects`]}),o(!1),c(void 0),r(e(`projects.toast.updated`),`success`)},onError:e=>{r(e.message,`error`)}}),P=q({mutationFn:e=>Z.deleteProject(e),onSuccess:()=>{f(null),r(e(`projects.toast.deleted`),`success`),setTimeout(()=>window.location.reload(),100)},onError:e=>{f(null),r(e.message,`error`)}}),F=q({mutationFn:e=>Z.importProject(e),onSuccess:()=>{n.invalidateQueries({queryKey:[`projects`]}),r(e(`projects.toast.imported`),`success`)},onError:e=>{r(e.message,`error`)}}),I=(0,y.useRef)(null),L=async()=>{try{let t=await Z.getProjects(),n=await Promise.all(t.map(async e=>await Z.exportProjectJson(e.id))),i=new Blob([JSON.stringify(n,null,2)],{type:`application/json`}),a=URL.createObjectURL(i),o=document.createElement(`a`);o.href=a,o.download=`bambuddy_projects_${new Date().toISOString().split(`T`)[0]}.json`,o.click(),URL.revokeObjectURL(a),r(e(`projects.toast.exported`),`success`)}catch(e){r(e.message,`error`)}},R=()=>{I.current?.click()},z=async t=>{let i=t.target.files?.[0];if(i){try{if(i.name.toLowerCase().endsWith(`.zip`))await Z.importProjectFile(i),n.invalidateQueries({queryKey:[`projects`]}),r(e(`projects.toast.imported`),`success`);else{let t=await i.text(),n=JSON.parse(t),a=Array.isArray(n)?n:[n];for(let e of a)await F.mutateAsync(e);a.length>1&&r(e(`projects.toast.multipleImported`,{count:a.length}),`success`)}}catch(t){r(`${e(`projects.toast.importFailed`)}: ${t.message}`,`error`)}t.target.value=``}},B=e=>{s?N.mutate({id:s.id,data:e}):M.mutate(e)},V=e=>{c(e),o(!0)},ee=e=>{t(`/projects/${e.id}`)},te=e=>{f(e)},ne=()=>{d!==null&&P.mutate(d)},re=C?.reduce((e,t)=>(e[t.status]=(e[t.status]||0)+1,e.all=(e.all||0)+1,e),{})||{};return(0,G.jsxs)(`div`,{className:`p-4 md:p-8 space-y-8`,children:[(0,G.jsx)(`input`,{ref:I,type:`file`,accept:`.json,.zip`,onChange:z,className:`hidden`}),(0,G.jsxs)(`div`,{className:`flex flex-col sm:flex-row sm:items-center justify-between gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(gc,{className:`w-7 h-7 text-bambu-green`}),e(`projects.title`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:e(`projects.subtitle`)})]}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:R,disabled:!i(`projects:create`),title:i(`projects:create`)?e(`projects.importProject`):e(`projects.noImportPermission`),children:[(0,G.jsx)(Bu,{className:`w-4 h-4 mr-2`}),e(`projects.import`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:L,disabled:!i(`projects:read`),title:i(`projects:read`)?e(`projects.exportAll`):e(`projects.noExportPermission`),children:[(0,G.jsx)(Ys,{className:`w-4 h-4 mr-2`}),e(`projects.export`)]}),(0,G.jsxs)(Q,{onClick:()=>o(!0),className:`sm:w-auto w-full`,disabled:!i(`projects:create`),title:i(`projects:create`)?void 0:e(`projects.noCreatePermission`),children:[(0,G.jsx)(Pl,{className:`w-4 h-4 mr-2`}),e(`projects.newProject`)]})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`flex gap-1 p-1 bg-bambu-dark rounded-xl w-fit`,children:[{key:`active`,label:e(`projects.statusActive`),icon:js},{key:`completed`,label:e(`projects.statusCompleted`),icon:Ss},{key:`archived`,label:e(`projects.statusArchived`),icon:Po},{key:`all`,label:e(`common.all`),icon:gc}].map(({key:e,label:t,icon:n})=>(0,G.jsxs)(`button`,{onClick:()=>u(e),className:`flex items-center gap-2 px-4 py-2 text-sm rounded-lg transition-all ${l===e?`bg-bambu-card text-white shadow-sm`:`text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(n,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:t}),re[e]>0&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded-full ${l===e?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark-tertiary`}`,children:re[e]})]},e))}),D.size>0&&(0,G.jsxs)(`button`,{type:`button`,onClick:_,"aria-pressed":p,title:e(p?`projects.expandSubProjects`:`projects.collapseSubProjects`),className:`flex items-center gap-2 px-3 py-1.5 text-sm rounded-lg transition-colors ${p?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:text-white hover:bg-bambu-dark`}`,children:[(0,G.jsx)(bc,{className:`w-4 h-4`}),e(`common.collapse`)]})]}),S?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-20`,children:(0,G.jsxs)(`div`,{className:`flex flex-col items-center gap-3`,children:[(0,G.jsx)(Y,{className:`w-8 h-8 animate-spin text-bambu-green`}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`projects.loading`)})]})}):x?.length===0?(0,G.jsxs)(`div`,{className:`flex flex-col items-center justify-center py-20 px-4`,children:[(0,G.jsx)(`div`,{className:`p-4 bg-bambu-dark rounded-2xl mb-4`,children:(0,G.jsx)(gc,{className:`w-12 h-12 text-bambu-gray/50`})}),(0,G.jsx)(`h3`,{className:`text-lg font-medium text-white mb-2`,children:l===`all`?e(`projects.noProjects`):e(`projects.noProjectsFiltered`,{status:l})}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-center max-w-md mb-6`,children:l===`all`?e(`projects.createFirst`):e(`projects.noProjectsFilteredHelp`,{status:l})}),l===`all`&&(0,G.jsxs)(Q,{onClick:()=>o(!0),disabled:!i(`projects:create`),title:i(`projects:create`)?void 0:e(`projects.noCreatePermission`),children:[(0,G.jsx)(Pl,{className:`w-4 h-4 mr-2`}),e(`projects.createFirstButton`)]})]}):(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 xl:grid-cols-3 gap-8`,children:A.map(e=>j(e,0,new Set))}),d!==null&&(0,G.jsx)(rf,{title:e(`projects.deleteProject`),message:e(`projects.deleteConfirm`),confirmText:e(`projects.deleteProject`),variant:`danger`,onConfirm:ne,onCancel:()=>f(null)}),a&&(0,G.jsx)(OKe,{project:s,onClose:()=>{o(!1),c(void 0)},onSave:B,isLoading:M.isPending||N.isPending,currencySymbol:b,t:e})]})}function F5(e){let t=(e.file_type||``).toLowerCase();if(t===`gcode`||t===`gcode.3mf`)return!0;let n=(e.filename||``).toLowerCase();return n.endsWith(`.gcode`)||n.endsWith(`.gcode.3mf`)}function I5(e,t,n){return F5(e)?!1:t?dAe(e.filename):uAe(e.filename,n)}function L5(e){return e>=1e3?`${(e/1e3).toFixed(2)}kg`:`${Math.round(e)}g`}function MKe({status:e,t}){let n={active:`bg-bambu-green/20 text-bambu-green`,completed:`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`,archived:`bg-bambu-gray/20 text-bambu-gray`},r=n[e]||n.active,i={active:t(`projectDetail.status.active`),completed:t(`projectDetail.status.completed`),archived:t(`projectDetail.status.archived`)};return(0,G.jsx)(`span`,{className:`px-2 py-1 rounded text-sm font-medium ${r}`,children:i[e]||e.charAt(0).toUpperCase()+e.slice(1)})}function NKe({icon:e,label:t,value:n,subValue:r,hint:i,color:a=`text-bambu-gray`}){return(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`p-4`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,title:i,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg bg-bambu-dark ${a}`,children:(0,G.jsx)(e,{className:`w-5 h-5`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:t}),(0,G.jsx)(`p`,{className:`text-xl font-semibold text-white`,children:n}),r&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/70`,children:r})]})]})})})}function PKe({archives:e,t}){return e.length===0?(0,G.jsxs)(`div`,{className:`text-center py-8 text-bambu-gray`,children:[(0,G.jsx)(Sl,{className:`w-12 h-12 mx-auto mb-2 opacity-50`}),(0,G.jsx)(`p`,{children:t(`projectDetail.noPrints`)})]}):(0,G.jsx)(`div`,{className:`grid grid-cols-2 sm:grid-cols-3 md:grid-cols-4 lg:grid-cols-5 xl:grid-cols-6 gap-3`,children:e.map(e=>(0,G.jsxs)(Ai,{to:`/archives?search=${encodeURIComponent(e.print_name||``)}`,className:`group relative aspect-square rounded-lg bg-bambu-dark border border-bambu-dark-tertiary overflow-hidden hover:border-bambu-green transition-colors`,children:[e.thumbnail_path?(0,G.jsx)(`img`,{src:Z.getArchiveThumbnail(e.id),alt:e.print_name||`Print`,className:`w-full h-full object-cover`}):(0,G.jsx)(`div`,{className:`w-full h-full flex items-center justify-center text-bambu-gray`,children:(0,G.jsx)(Sl,{className:`w-8 h-8`})}),e.status===`failed`&&(0,G.jsx)(`div`,{className:`absolute inset-0 bg-red-500/30 flex items-center justify-center`,children:(0,G.jsx)(Ds,{className:`w-8 h-8 text-white`})}),e.status===`completed`&&(0,G.jsx)(`div`,{className:`absolute top-1 right-1`,children:(0,G.jsx)(xs,{className:`w-4 h-4 text-bambu-green`})}),(0,G.jsx)(`div`,{className:`absolute inset-x-0 bottom-0 bg-gradient-to-t from-black/80 to-transparent p-2 opacity-0 group-hover:opacity-100 transition-opacity`,children:(0,G.jsx)(`p`,{className:`text-xs text-white truncate`,children:e.print_name||`Unknown`})})]},e.id))})}function FKe({priority:e,t}){let n={low:{color:`bg-gray-500/20 text-gray-400`,label:t(`projectDetail.priority.low`)},normal:{color:`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`,label:t(`projectDetail.priority.normal`)},high:{color:`bg-orange-100 dark:bg-orange-500/20 text-orange-700 dark:text-orange-400`,label:t(`projectDetail.priority.high`)},urgent:{color:`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`,label:t(`projectDetail.priority.urgent`)}},{color:r,label:i}=n[e]||n.normal;return(0,G.jsxs)(`span`,{className:`px-2 py-1 rounded text-xs font-medium flex items-center gap-1 ${r}`,children:[e===`urgent`&&(0,G.jsx)(Iu,{className:`w-3 h-3`}),i]})}function R5(e,t){if(!e)return null;let n=ep(e);if(!n)return null;let r=new Date,i=Math.ceil((n.getTime()-r.getTime())/(1e3*60*60*24));return i<0?{color:`text-red-700 dark:text-red-400`,label:t(`projectDetail.dueDate.overdue`)}:i===0?{color:`text-orange-700 dark:text-orange-400`,label:t(`projectDetail.dueDate.today`)}:i<=3?{color:`text-yellow-700 dark:text-yellow-400`,label:t(`projectDetail.dueDate.daysLeft`,{count:i})}:{color:`text-bambu-gray`,label:t(`projectDetail.dueDate.daysLeft`,{count:i})}}function IKe(){let{id:e}=dr(),t=or(),{t:n}=U(),r=co(),{showToast:i}=Gd(),{hasPermission:a}=jd(),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(``),[f,p]=(0,y.useState)(null),m=parseInt(e||`0`,10),{data:h,isLoading:g,error:_}=K({queryKey:[`project`,m],queryFn:()=>Z.getProject(m),enabled:m>0}),{data:v,isLoading:b}=K({queryKey:[`project-archives`,m],queryFn:()=>Z.getProjectArchives(m),enabled:m>0}),{data:x,isLoading:S}=K({queryKey:[`project-bom`,m],queryFn:()=>Z.getProjectBOM(m),enabled:m>0}),{data:C,isLoading:w}=K({queryKey:[`project-timeline`,m],queryFn:()=>Z.getProjectTimeline(m,20),enabled:m>0}),{data:T}=K({queryKey:[`settings`],queryFn:Z.getSettings}),{data:E}=K({queryKey:[`project-folders`,m],queryFn:()=>Z.getLibraryFoldersByProject(m),enabled:m>0}),{data:D,isLoading:O}=K({queryKey:[`project-files`,m],queryFn:()=>Z.getLibraryFiles(null,!1,m),enabled:m>0}),k=(0,y.useMemo)(()=>{let e=new Map;for(let t of D??[])if(t.folder_id!=null){let n=e.get(t.folder_id)??[];n.push(t),e.set(t.folder_id,n)}return e},[D]),{data:A}=K({queryKey:[`project-file-progress`,m],queryFn:()=>Z.getProjectFileProgress(m),enabled:m>0}),j=(0,y.useMemo)(()=>{let e=new Map;for(let t of A??[])e.set(t.file_id,t.completed_count);return e},[A]),M=(0,y.useMemo)(()=>{let e=h?.target_sets;if(!e||!D)return null;let t=D.filter(e=>F5(e));return t.length===0?null:Math.min(...t.map(t=>Math.min(j.get(t.id)??0,e)))},[h?.target_sets,D,j]),N=Pf(T?.currency||`USD`),P=T?.time_format||`system`,F=q({mutationFn:e=>Z.updateProject(m,e),onSuccess:()=>{r.invalidateQueries({queryKey:[`project`,m]}),r.invalidateQueries({queryKey:[`projects`]}),s(!1),l(!1),i(n(`projectDetail.toast.projectUpdated`),`success`)},onError:e=>{i(e.message,`error`)}}),I=()=>{d(h?.notes||``),l(!0)},L=()=>{F.mutate({notes:u})},R=()=>{l(!1),d(``)},[z,B]=(0,y.useState)(``),[V,ee]=(0,y.useState)(1),[te,ne]=(0,y.useState)(``),[re,ie]=(0,y.useState)(``),[ae,oe]=(0,y.useState)(``),[se,H]=(0,y.useState)(!1),[ce,le]=(0,y.useState)(!1),[ue,de]=(0,y.useState)(null),[fe,pe]=(0,y.useState)(``),[me,he]=(0,y.useState)(1),[ge,_e]=(0,y.useState)(``),[ve,ye]=(0,y.useState)(``),[be,xe]=(0,y.useState)(``),[Se,Ce]=(0,y.useState)({isOpen:!1,title:``,message:``,onConfirm:()=>{}}),we=q({mutationFn:e=>Z.createBOMItem(m,e),onSuccess:()=>{r.invalidateQueries({queryKey:[`project-bom`,m]}),r.invalidateQueries({queryKey:[`project`,m]}),B(``),ee(1),ne(``),ie(``),oe(``),H(!1),i(n(`projectDetail.toast.partAdded`),`success`)},onError:e=>i(e.message,`error`)}),Te=q({mutationFn:({itemId:e,data:t})=>Z.updateBOMItem(m,e,t),onSuccess:()=>{r.invalidateQueries({queryKey:[`project-bom`,m]}),r.invalidateQueries({queryKey:[`project`,m]}),de(null)},onError:e=>i(e.message,`error`)}),Ee=q({mutationFn:e=>Z.deleteBOMItem(m,e),onSuccess:()=>{r.invalidateQueries({queryKey:[`project-bom`,m]}),r.invalidateQueries({queryKey:[`project`,m]}),i(n(`projectDetail.toast.partRemoved`),`success`)},onError:e=>i(e.message,`error`)}),De=e=>{e.preventDefault(),z.trim()&&we.mutate({name:z.trim(),quantity_needed:V,unit_price:te?parseFloat(te):void 0,sourcing_url:re.trim()||void 0,remarks:ae.trim()||void 0})},Oe=e=>{let t=e.is_complete?0:e.quantity_needed;Te.mutate({itemId:e.id,data:{quantity_acquired:t}})},ke=(e,t)=>{Ce({isOpen:!0,title:n(`projectDetail.bom.deletePart`),message:n(`projectDetail.bom.deleteConfirm`,{name:t}),onConfirm:()=>{Ce(e=>({...e,isOpen:!1})),Ee.mutate(e)}})},Ae=e=>{de(e),pe(e.name),he(e.quantity_needed),_e(e.unit_price?.toString()||``),ye(e.sourcing_url||``),xe(e.remarks||``)},je=e=>{e.preventDefault(),!(!ue||!fe.trim())&&Te.mutate({itemId:ue.id,data:{name:fe.trim(),quantity_needed:me,unit_price:ge?parseFloat(ge):void 0,sourcing_url:ve.trim()||void 0,remarks:be.trim()||void 0}})},Me=()=>{de(null)},Ne=async()=>{try{let{blob:e,filename:t}=await Z.exportProjectZip(Number(m)),r=URL.createObjectURL(e),a=document.createElement(`a`);a.href=r,a.download=t||`${h?.name||`project`}_${new Date().toISOString().split(`T`)[0]}.zip`,a.click(),URL.revokeObjectURL(r),i(n(`projectDetail.toast.projectExported`),`success`)}catch(e){i(e.message,`error`)}},Pe=q({mutationFn:()=>Z.createTemplateFromProject(m),onSuccess:()=>{r.invalidateQueries({queryKey:[`projects`]}),i(n(`projectDetail.toast.templateCreated`),`success`)},onError:e=>i(e.message,`error`)}),Fe=e=>rp(e,P,{month:`short`,day:`numeric`,hour:`2-digit`,minute:`2-digit`});if(g)return(0,G.jsx)(`div`,{className:`flex items-center justify-center py-24`,children:(0,G.jsx)(Y,{className:`w-8 h-8 animate-spin text-bambu-green`})});if(_||!h)return(0,G.jsxs)(`div`,{className:`text-center py-24`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:_?`${n(`common.error`)}: ${_.message}`:n(`projectDetail.notFound`)}),(0,G.jsx)(Q,{variant:`secondary`,className:`mt-4`,onClick:()=>t(`/projects`),children:n(`projectDetail.backToProjects`)})]});let Ie=h.stats,Le=Ie?.progress_percent??0,Re=Ie?.parts_progress_percent??0;return(0,G.jsxs)(`div`,{className:`p-4 md:p-8 space-y-8`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(Ai,{to:`/projects`,className:`hover:text-white transition-colors`,children:n(`nav.projects`)}),(0,G.jsx)(ms,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-white`,children:h.name})]}),(0,G.jsxs)(`div`,{className:`flex items-start justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-4`,children:[(0,G.jsx)(`button`,{onClick:()=>t(`/projects`),className:`p-2 rounded-lg bg-bambu-card hover:bg-bambu-dark-tertiary transition-colors`,children:(0,G.jsx)(Lo,{className:`w-5 h-5 text-bambu-gray`})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-4 h-4 rounded-full shrink-0`,style:{backgroundColor:h.color||`#6b7280`}}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h1`,{className:`text-2xl font-bold text-white`,children:h.name}),h.description&&(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:h.description})]})]}),(0,G.jsx)(MKe,{status:h.status,t:n})]}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:Ne,disabled:!a(`projects:read`),title:a(`projects:read`)?n(`projectDetail.exportProject`):n(`projectDetail.noExportPermission`),children:[(0,G.jsx)(Ys,{className:`w-4 h-4 mr-2`}),n(`projectDetail.export`)]}),(0,G.jsxs)(Q,{onClick:()=>s(!0),disabled:!a(`projects:update`),title:a(`projects:update`)?void 0:n(`projectDetail.noEditPermission`),children:[(0,G.jsx)(Dl,{className:`w-4 h-4 mr-2`}),n(`common.edit`)]})]})]}),(h.target_count||h.target_parts_count||h.target_sets)&&(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-4 space-y-4`,children:[h.target_count&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:n(`projectDetail.progress.platesProgress`)}),(0,G.jsxs)(`span`,{className:`text-sm font-medium text-white`,children:[Ie?.total_archives||0,` / `,h.target_count,` `,n(`projectDetail.progress.printJobs`)]})]}),(0,G.jsx)(`div`,{className:`h-3 bg-bambu-dark rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full transition-all duration-500`,style:{width:`${Math.min(Le,100)}%`,backgroundColor:Le>=100?`#22c55e`:h.color||`#6b7280`}})}),(0,G.jsxs)(`div`,{className:`flex justify-between mt-1`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray/70`,children:n(`projectDetail.progress.percentComplete`,{percent:Le.toFixed(0)})}),Ie?.remaining_prints!=null&&Ie.remaining_prints>0&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray/70`,children:n(`projectDetail.progress.remaining`,{count:Ie.remaining_prints})})]})]}),h.target_parts_count&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:n(`projectDetail.progress.partsProgress`)}),(0,G.jsxs)(`span`,{className:`text-sm font-medium text-white`,children:[Ie?.completed_prints||0,` / `,h.target_parts_count,` `,n(`projectDetail.progress.parts`)]})]}),(0,G.jsx)(`div`,{className:`h-3 bg-bambu-dark rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full transition-all duration-500`,style:{width:`${Math.min(Re,100)}%`,backgroundColor:Re>=100?`#22c55e`:h.color||`#6b7280`}})}),(0,G.jsxs)(`div`,{className:`flex justify-between mt-1`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray/70`,children:n(`projectDetail.progress.percentComplete`,{percent:Re.toFixed(0)})}),Ie?.remaining_parts!=null&&Ie.remaining_parts>0&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray/70`,children:n(`projectDetail.progress.remaining`,{count:Ie.remaining_parts})})]})]}),h.target_sets?(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:n(`projectDetail.progress.setsProgress`)}),(0,G.jsxs)(`span`,{className:`text-sm font-medium text-white`,children:[M??0,` / `,h.target_sets,` `,n(`projectDetail.progress.sets`)]})]}),(0,G.jsx)(`div`,{className:`h-3 bg-bambu-dark rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full transition-all duration-500`,style:{width:`${Math.min((M??0)/h.target_sets*100,100)}%`,backgroundColor:(M??0)>=h.target_sets?`#22c55e`:h.color||`#6b7280`}})}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/70 mt-1`,children:n(`projectDetail.progress.setsHint`)})]}):null]})}),Ie&&(0,G.jsxs)(`div`,{className:`grid grid-cols-2 md:grid-cols-4 gap-4`,children:[(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`p-4`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg bg-bambu-dark text-bambu-green`,children:(0,G.jsx)(Sl,{className:`w-5 h-5`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`projectDetail.stats.printJobs`)}),(0,G.jsxs)(`p`,{className:`text-xl font-semibold text-white`,children:[Ie.total_archives,` `,(0,G.jsx)(`span`,{className:`text-sm font-normal text-bambu-gray`,children:n(`projectDetail.stats.total`)})]}),Ie.failed_prints>0&&(0,G.jsx)(`p`,{className:`text-sm text-status-error`,children:n(`projectDetail.stats.failed`,{count:Ie.failed_prints})}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`projectDetail.stats.partsPrinted`,{count:Ie.completed_prints})})]})]})})}),(0,G.jsx)(NKe,{icon:js,label:n(`projectDetail.stats.printTime`),value:lp(Ie.total_print_time_hours),color:`text-yellow-600 dark:text-yellow-400`}),(0,G.jsx)(NKe,{icon:Ll,label:n(`projectDetail.stats.filamentUsed`),value:L5(Ie.total_filament_grams),color:`text-purple-600 dark:text-purple-400`})]}),h.rollup_stats&&(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-4`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2 mb-3`,children:[(0,G.jsx)(bc,{className:`w-5 h-5`}),n(`projectDetail.rollup.title`,{count:h.descendant_count})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 md:grid-cols-4 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase`,children:n(`projectDetail.stats.printJobs`)}),(0,G.jsx)(`p`,{className:`text-lg font-semibold text-white`,children:h.rollup_stats.total_archives}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`projectDetail.stats.partsPrinted`,{count:h.rollup_stats.completed_prints})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase`,children:n(`projectDetail.stats.printTime`)}),(0,G.jsx)(`p`,{className:`text-lg font-semibold text-white`,children:lp(h.rollup_stats.total_print_time_hours)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase`,children:n(`projectDetail.stats.filamentUsed`)}),(0,G.jsx)(`p`,{className:`text-lg font-semibold text-white`,children:L5(h.rollup_stats.total_filament_grams)})]}),(()=>{let e=h.rollup_stats.estimated_cost+h.rollup_stats.total_energy_cost+h.rollup_stats.bom_cost;return e<=0?null:(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase`,children:n(`projectDetail.cost.totalCost`)}),(0,G.jsxs)(`p`,{className:`text-lg font-semibold text-bambu-green`,children:[N,e.toFixed(2)]})]})})()]}),h.rollup_stats.progress_percent!==null&&(0,G.jsxs)(`div`,{className:`mt-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:n(`projectDetail.rollup.progress`)}),(0,G.jsx)(`span`,{className:`text-sm font-medium text-white`,children:n(`projectDetail.rollup.percentComplete`,{percent:h.rollup_stats.progress_percent.toFixed(0)})})]}),(0,G.jsx)(`div`,{className:`h-3 bg-bambu-dark rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full transition-all duration-500`,style:{width:`${Math.min(h.rollup_stats.progress_percent,100)}%`,backgroundColor:h.rollup_stats.progress_percent>=100?`#22c55e`:h.color||`#6b7280`}})})]})]})}),Ie&&(()=>{let e=Ie.estimated_cost+Ie.total_energy_cost+Ie.bom_cost;return Ie.estimated_cost>0||e>0||h.budget!==null})()&&(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-4`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white mb-3`,children:n(`projectDetail.cost.title`)}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 md:grid-cols-4 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase`,children:n(`projectDetail.cost.filamentCost`)}),(0,G.jsxs)(`p`,{className:`text-lg font-semibold text-white`,children:[N,Ie.estimated_cost.toFixed(2)]})]}),Ie.total_energy_kwh>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase`,children:n(`projectDetail.cost.energy`)}),(0,G.jsxs)(`p`,{className:`text-lg font-semibold text-white`,children:[Ie.total_energy_kwh.toFixed(3),` kWh`,Ie.total_energy_cost>0&&(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray ml-1`,children:[`(`,N,Ie.total_energy_cost.toFixed(2),`)`]})]})]}),(()=>{let e=Ie.estimated_cost+Ie.total_energy_cost+Ie.bom_cost;return e<=0?null:(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase`,children:n(`projectDetail.cost.totalCost`)}),(0,G.jsxs)(`p`,{className:`text-lg font-semibold text-bambu-green`,children:[N,e.toFixed(2)]}),Ie.bom_cost>0&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/70`,children:n(`projectDetail.cost.includesBom`)})]})})(),h.budget!==null&&(()=>{let e=Ie.estimated_cost+Ie.total_energy_cost+Ie.bom_cost,t=h.budget-e;return(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase`,children:n(`projectDetail.cost.budget`)}),(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[n(`projectDetail.cost.total`),`: `,(0,G.jsxs)(`span`,{className:`text-white font-semibold`,children:[N,h.budget.toFixed(2)]})]}),(0,G.jsxs)(`p`,{className:`text-sm ${t>=0?`text-bambu-green`:`text-red-700 dark:text-red-400`}`,children:[n(`projectDetail.cost.remaining`),`: `,(0,G.jsxs)(`span`,{className:`font-semibold`,children:[N,t.toFixed(2)]})]})]})})()]})]})}),h.children&&h.children.length>0&&(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-4`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2 mb-3`,children:[(0,G.jsx)(bc,{className:`w-5 h-5`}),n(`projectDetail.subProjects.title`,{count:h.children.length})]}),(0,G.jsx)(`div`,{className:`space-y-2`,children:h.children.map(e=>(0,G.jsxs)(Ai,{to:`/projects/${e.id}`,className:`flex items-center justify-between gap-4 p-3 bg-bambu-dark rounded-lg hover:bg-bambu-dark-tertiary transition-colors`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 min-w-0`,children:[(0,G.jsx)(`div`,{className:`w-3 h-3 rounded-full flex-shrink-0`,style:{backgroundColor:e.color||`#6b7280`}}),(0,G.jsx)(`span`,{className:`text-white truncate`,children:e.name}),(0,G.jsx)(`span`,{className:`text-xs px-2 py-0.5 rounded flex-shrink-0 ${e.status===`completed`?`bg-status-ok/20 text-status-ok`:e.status===`archived`?`bg-bambu-gray/20 text-bambu-gray`:`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`}`,children:e.status}),e.descendant_count>0&&(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray flex-shrink-0 inline-flex items-center gap-1`,children:[(0,G.jsx)(bc,{className:`w-3 h-3`}),e.descendant_count]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-4 text-sm text-bambu-gray flex-shrink-0`,children:[e.total_archives>0&&(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:n(`projectDetail.subProjects.jobs`,{count:e.total_archives})}),e.total_filament_grams>0&&(0,G.jsx)(`span`,{className:`hidden md:inline`,children:L5(e.total_filament_grams)}),e.total_cost>0&&(0,G.jsxs)(`span`,{className:`hidden md:inline`,children:[N,e.total_cost.toFixed(2)]}),e.progress_percent!==null&&(0,G.jsxs)(`span`,{children:[e.progress_percent.toFixed(0),`%`]})]})]},e.id))})]})}),h.parent_id&&h.parent_name&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(qc,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:n(`projectDetail.partOf`)}),(0,G.jsx)(Ai,{to:`/projects/${h.parent_id}`,className:`text-bambu-green hover:underline`,children:h.parent_name})]}),(h.tags||h.due_date||h.priority!==`normal`)&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-4`,children:[h.priority&&h.priority!==`normal`&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray uppercase`,children:n(`projectDetail.priorityLabel`)}),(0,G.jsx)(FKe,{priority:h.priority,t:n})]}),h.due_date&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(as,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:np(h.due_date,{year:`numeric`,month:`short`,day:`numeric`})}),R5(h.due_date,n)&&(0,G.jsxs)(`span`,{className:`text-xs ${R5(h.due_date,n).color}`,children:[`(`,R5(h.due_date,n).label,`)`]})]}),h.tags&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Tu,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1`,children:h.tags.split(`,`).map((e,t)=>(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-bambu-dark-tertiary text-bambu-gray text-xs rounded`,children:e.trim()},t))})]})]}),(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(dc,{className:`w-5 h-5`}),n(`projectDetail.notes.title`)]}),c?(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:R,disabled:F.isPending,children:[(0,G.jsx)(td,{className:`w-4 h-4 mr-1`}),n(`common.cancel`)]}),(0,G.jsxs)(Q,{size:`sm`,onClick:L,disabled:F.isPending,children:[F.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin mr-1`}):(0,G.jsx)(Kl,{className:`w-4 h-4 mr-1`}),n(`common.save`)]})]}):(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:I,disabled:!a(`projects:update`),title:a(`projects:update`)?void 0:n(`projectDetail.notes.noEditPermission`),children:[(0,G.jsx)(Dl,{className:`w-4 h-4 mr-1`}),n(`common.edit`)]})]}),c?(0,G.jsx)(W4,{content:u,onChange:d,placeholder:n(`projectDetail.notes.placeholder`)}):h.notes?(0,G.jsx)(`div`,{className:`prose prose-invert prose-sm max-w-none`,dangerouslySetInnerHTML:{__html:$K.sanitize(h.notes)}}):(0,G.jsx)(`p`,{className:`text-bambu-gray/70 text-sm italic`,children:n(`projectDetail.notes.empty`)})]})}),(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-4`,children:[(0,G.jsx)(`div`,{className:`flex items-center justify-between mb-3`,children:(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(_c,{className:`w-5 h-5`}),n(`projectDetail.files.title`)]})}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mb-3`,children:[(0,G.jsx)(Ai,{to:`/files`,className:`text-bambu-green hover:underline`,children:n(`projectDetail.files.linkFolders`)}),` `,n(`projectDetail.files.forQuickAccess`)]}),E&&E.length>0?(0,G.jsx)(`div`,{className:`space-y-4`,children:E.map(e=>{let t=k.get(e.id)??[],r=O;return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(Ai,{to:`/files?folder=${e.id}`,className:`flex items-center justify-between p-3 bg-bambu-dark rounded-lg hover:bg-bambu-dark-tertiary transition-colors mb-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 min-w-0`,children:[(0,G.jsx)(_c,{className:`w-5 h-5 text-bambu-green shrink-0`}),(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white truncate`,children:e.name}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`projectDetail.files.fileCount`,{count:e.file_count})})]})]}),(0,G.jsx)(ms,{className:`w-4 h-4 text-bambu-gray shrink-0`})]}),r?(0,G.jsx)(`div`,{className:`flex items-center gap-2 px-3 py-2 text-bambu-gray text-sm`,children:(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`})}):t.length===0?(0,G.jsx)(`p`,{className:`text-bambu-gray/60 text-xs italic px-3`,children:n(`projectDetail.files.noFiles`)}):(0,G.jsx)(`div`,{className:`space-y-1 pl-3`,children:t.map(e=>{let t=F5(e);return(0,G.jsxs)(`div`,{className:`flex items-center gap-3 p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 shrink-0 rounded bg-bambu-dark overflow-hidden flex items-center justify-center`,children:e.thumbnail_path?(0,G.jsx)(`img`,{src:Z.getLibraryFileThumbnailUrl(e.id),alt:e.print_name||e.filename,className:`w-full h-full object-cover`}):(0,G.jsx)(oc,{className:`w-5 h-5 text-bambu-gray/40`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white truncate`,title:e.print_name||e.filename,children:e.print_name||e.filename}),(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded font-medium ${e.file_type===`3mf`?`bg-bambu-green/20 text-bambu-green`:e.file_type===`gcode`||e.file_type===`gcode.3mf`?`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`:`bg-bambu-gray/20 text-bambu-gray`}`,children:e.file_type.toUpperCase()})]}),t&&(()=>{let t=j.get(e.id)??0,r=h.target_sets;if(!r)return t>0?(0,G.jsxs)(`span`,{className:`shrink-0 text-xs px-1.5 py-0.5 rounded-full bg-bambu-dark text-bambu-gray`,title:n(`projectDetail.files.printedCount`,{count:t}),children:[t,`×`]}):null;let i=Math.min(t/r*100,100),a=t>=r?`text-status-ok`:t>0?`text-status-warning`:`text-bambu-gray`,o=t>=r?`bg-status-ok`:t>0?`bg-status-warning`:`bg-bambu-gray`;return(0,G.jsxs)(`div`,{className:`shrink-0 w-20`,title:n(`projectDetail.files.progressTooltip`,{done:t,target:r}),children:[(0,G.jsxs)(`p`,{className:`text-xs font-medium text-right ${a}`,children:[t,` / `,r]}),(0,G.jsx)(`div`,{className:`h-1 bg-bambu-dark rounded-full overflow-hidden mt-1`,children:(0,G.jsx)(`div`,{className:`h-full ${o}`,style:{width:`${i}%`}})})]})})(),t&&(0,G.jsx)(`div`,{className:`flex items-center gap-1 shrink-0`,children:(0,G.jsx)(`button`,{onClick:()=>p(e),title:n(`common.print`),className:`p-1.5 rounded hover:bg-bambu-green/20 text-bambu-green transition-colors`,children:(0,G.jsx)(Ll,{className:`w-4 h-4`})})})]},e.id)})})]},e.id)})}):(0,G.jsx)(`p`,{className:`text-bambu-gray/70 text-sm italic`,children:n(`projectDetail.files.empty`)})]})}),(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-4`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(su,{className:`w-5 h-5`}),n(`projectDetail.bom.title`),Ie&&Ie.bom_total_items>0&&(0,G.jsxs)(`span`,{className:`text-sm font-normal text-bambu-gray`,children:[`(`,n(`projectDetail.bom.acquired`,{completed:Ie.bom_completed_items,total:Ie.bom_total_items}),`)`]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[x&&x.some(e=>e.is_complete)&&(0,G.jsx)(`button`,{onClick:()=>le(!ce),className:`text-xs px-2 py-1 rounded transition-colors ${ce?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,children:n(ce?`projectDetail.bom.showAll`:`projectDetail.bom.hideDone`)}),!se&&(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>H(!0),disabled:!a(`projects:update`),title:a(`projects:update`)?void 0:n(`projectDetail.bom.noAddPermission`),children:[(0,G.jsx)(Pl,{className:`w-4 h-4 mr-1`}),n(`projectDetail.bom.addPart`)]})]})]}),se&&(0,G.jsxs)(`form`,{onSubmit:De,className:`bg-bambu-dark rounded-lg p-4 mb-4 space-y-3`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-3`,children:[(0,G.jsx)(`input`,{type:`text`,value:z,onChange:e=>B(e.target.value),className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:n(`projectDetail.bom.partNamePlaceholder`),autoFocus:!0}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,value:V,onChange:e=>ee(parseInt(e.target.value)||1),className:`w-20 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-sm text-white focus:outline-none focus:border-bambu-green`,min:`1`,placeholder:n(`projectDetail.bom.qty`)}),(0,G.jsx)(`input`,{type:`number`,step:`0.01`,value:te,onChange:e=>ne(e.target.value),className:`flex-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:n(`projectDetail.bom.price`,{currency:N})})]})]}),(0,G.jsx)(`input`,{type:`url`,value:re,onChange:e=>ie(e.target.value),className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:n(`projectDetail.bom.sourcingUrlPlaceholder`)}),(0,G.jsx)(`input`,{type:`text`,value:ae,onChange:e=>oe(e.target.value),className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:n(`projectDetail.bom.remarksPlaceholder`)}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,size:`sm`,onClick:()=>H(!1),children:n(`common.cancel`)}),(0,G.jsx)(Q,{type:`submit`,size:`sm`,disabled:!z.trim()||we.isPending,children:we.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):n(`projectDetail.bom.addPart`)})]})]}),S?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-4`,children:(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin text-bambu-green`})}):x&&x.length>0?(0,G.jsxs)(`div`,{className:`space-y-2`,children:[x.filter(e=>!ce||!e.is_complete).map(e=>(0,G.jsx)(`div`,{className:`p-3 rounded-lg transition-colors ${e.is_complete?`bg-status-ok/10`:`bg-bambu-dark`}`,children:ue?.id===e.id?(0,G.jsxs)(`form`,{onSubmit:je,className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-3`,children:[(0,G.jsx)(`input`,{type:`text`,value:fe,onChange:e=>pe(e.target.value),className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:n(`projectDetail.bom.partName`),autoFocus:!0}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,value:me,onChange:e=>he(parseInt(e.target.value)||1),className:`w-20 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-sm text-white focus:outline-none focus:border-bambu-green`,min:`1`,placeholder:n(`projectDetail.bom.qty`)}),(0,G.jsx)(`input`,{type:`number`,step:`0.01`,value:ge,onChange:e=>_e(e.target.value),className:`flex-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:n(`projectDetail.bom.price`,{currency:N})})]})]}),(0,G.jsx)(`input`,{type:`url`,value:ve,onChange:e=>ye(e.target.value),className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:n(`projectDetail.bom.sourcingUrlPlaceholder`)}),(0,G.jsx)(`input`,{type:`text`,value:be,onChange:e=>xe(e.target.value),className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:n(`projectDetail.bom.remarksPlaceholder`)}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,size:`sm`,onClick:Me,children:n(`common.cancel`)}),(0,G.jsx)(Q,{type:`submit`,size:`sm`,disabled:!fe.trim()||Te.isPending,children:Te.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):n(`common.save`)})]})]}):(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(`button`,{onClick:()=>a(`projects:update`)&&Oe(e),disabled:Te.isPending||!a(`projects:update`),title:a(`projects:update`)?void 0:n(`projectDetail.bom.noUpdatePermission`),className:`w-5 h-5 mt-0.5 rounded border-2 flex items-center justify-center transition-colors shrink-0 ${e.is_complete?`bg-status-ok border-status-ok text-white`:a(`projects:update`)?`border-bambu-gray hover:border-bambu-green`:`border-bambu-gray/50 cursor-not-allowed`}`,children:e.is_complete&&(0,G.jsx)(xs,{className:`w-3 h-3`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 min-w-0`,children:[(0,G.jsxs)(`p`,{className:`text-sm font-medium ${e.is_complete?`text-bambu-gray line-through`:`text-white`}`,children:[e.name,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal ml-2`,children:[`x`,e.quantity_needed]})]}),e.unit_price!==null&&(0,G.jsxs)(`span`,{className:`text-xs text-bambu-green whitespace-nowrap`,children:[N,(e.unit_price*e.quantity_needed).toFixed(2)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`button`,{onClick:()=>a(`projects:update`)&&Ae(e),disabled:!a(`projects:update`),className:`p-1 rounded transition-colors shrink-0 ${a(`projects:update`)?`hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white`:`text-bambu-gray/50 cursor-not-allowed`}`,title:a(`projects:update`)?n(`common.edit`):n(`projectDetail.bom.noEditPermission`),children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>a(`projects:update`)&&ke(e.id,e.name),disabled:!a(`projects:update`),className:`p-1 rounded transition-colors shrink-0 ${a(`projects:update`)?`hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-red-400`:`text-bambu-gray/50 cursor-not-allowed`}`,title:a(`projects:update`)?n(`common.delete`):n(`projectDetail.bom.noDeletePermission`),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})]}),e.sourcing_url&&(0,G.jsxs)(`a`,{href:e.sourcing_url,target:`_blank`,rel:`noopener noreferrer`,className:`flex items-center gap-1 mt-1 text-xs text-blue-700 dark:text-blue-400 hover:text-blue-900 dark:hover:text-blue-300 transition-colors`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(nc,{className:`w-3 h-3 shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,children:(()=>{try{return new URL(e.sourcing_url).hostname.replace(`www.`,``)}catch{return e.sourcing_url}})()})]}),e.remarks&&(0,G.jsx)(`p`,{className:`mt-1 text-xs text-bambu-gray/80 italic`,children:e.remarks})]})]})},e.id)),Ie&&Ie.bom_cost>0&&(0,G.jsxs)(`div`,{className:`pt-2 mt-2 border-t border-bambu-dark-tertiary flex justify-between text-sm`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:n(`projectDetail.bom.totalCost`)}),(0,G.jsxs)(`span`,{className:`text-white font-medium`,children:[N,Ie.bom_cost.toFixed(2)]})]})]}):(0,G.jsx)(`p`,{className:`text-bambu-gray/70 text-sm italic`,children:n(`projectDetail.bom.empty`)})]})}),(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-4`,children:[(0,G.jsx)(`div`,{className:`flex items-center justify-between mb-3`,children:(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Rc,{className:`w-5 h-5`}),n(`projectDetail.timeline.title`)]})}),w?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-4`,children:(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin text-bambu-green`})}):C&&C.length>0?(0,G.jsx)(`div`,{className:`space-y-3`,children:C.slice(0,10).map((e,t)=>(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsxs)(`div`,{className:`w-8 h-8 rounded-full flex items-center justify-center shrink-0 ${e.event_type===`print_completed`?`bg-status-ok/20 text-status-ok`:e.event_type===`print_failed`?`bg-status-error/20 text-status-error`:e.event_type===`print_started`?`bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:[e.event_type===`print_completed`&&(0,G.jsx)(xs,{className:`w-4 h-4`}),e.event_type===`print_failed`&&(0,G.jsx)(Ds,{className:`w-4 h-4`}),e.event_type===`print_started`&&(0,G.jsx)(Ll,{className:`w-4 h-4`}),e.event_type===`queued`&&(0,G.jsx)(Qc,{className:`w-4 h-4`}),e.event_type===`project_created`&&(0,G.jsx)(Pl,{className:`w-4 h-4`})]}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:e.title}),e.description&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray truncate`,children:e.description}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/70`,children:Fe(e.timestamp)})]})]},t))}):(0,G.jsx)(`p`,{className:`text-bambu-gray/70 text-sm italic`,children:n(`projectDetail.timeline.empty`)})]})}),!h.is_template&&(0,G.jsx)(`div`,{className:`flex justify-end`,children:(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>Pe.mutate(),disabled:Pe.isPending||!a(`projects:create`),title:a(`projects:create`)?void 0:n(`projectDetail.template.noCreatePermission`),children:[Pe.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin mr-2`}):(0,G.jsx)(Vs,{className:`w-4 h-4 mr-2`}),n(`projectDetail.template.saveAsTemplate`)]})}),Ie&&(Ie.queued_prints>0||Ie.in_progress_prints>0)&&(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Qc,{className:`w-5 h-5`}),n(`projectDetail.queue.title`)]}),(0,G.jsx)(Ai,{to:`/queue?project=${m}`,className:`text-sm text-bambu-green hover:underline`,children:n(`projectDetail.queue.viewAll`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-4 text-sm`,children:[Ie.in_progress_prints>0&&(0,G.jsx)(`span`,{className:`text-yellow-700 dark:text-yellow-400`,children:n(`projectDetail.queue.printing`,{count:Ie.in_progress_prints})}),Ie.queued_prints>0&&(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:n(`projectDetail.queue.queued`,{count:Ie.queued_prints})})]})]})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`flex items-center justify-between mb-4`,children:(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Sl,{className:`w-5 h-5`}),n(`projectDetail.prints.title`,{count:v?.length||0})]})}),b?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin text-bambu-green`})}):(0,G.jsx)(PKe,{archives:v||[],t:n})]}),o&&(0,G.jsx)(OKe,{t:n,currencySymbol:N,project:{...h,archive_count:Ie?.total_archives||0,total_items:Ie?.total_items||0,completed_count:Ie?.completed_prints||0,failed_count:Ie?.failed_prints||0,queue_count:Ie?.queued_prints||0,progress_percent:Ie?.progress_percent||null,child_count:h.children?.length??0,archives:[]},onClose:()=>s(!1),onSave:e=>F.mutate(e),isLoading:F.isPending}),Se.isOpen&&(0,G.jsx)(rf,{title:Se.title,message:Se.message,confirmText:n(`common.delete`),variant:`danger`,onConfirm:Se.onConfirm,onCancel:()=>Ce(e=>({...e,isOpen:!1}))}),f&&(0,G.jsx)(WW,{mode:`create`,libraryFileId:f.id,archiveName:f.print_name||f.filename,projectId:m,onClose:()=>p(null),onSuccess:()=>{p(null),r.invalidateQueries({queryKey:[`archives`]}),r.invalidateQueries({queryKey:[`queue`]})}})]})}function LKe({icon:e,label:t,dropdownLabel:n,onPrimary:r,items:i}){let[a,o]=(0,y.useState)(!1),s=(0,y.useRef)(null);return(0,y.useEffect)(()=>{if(!a)return;let e=e=>{s.current&&!s.current.contains(e.target)&&o(!1)},t=e=>{e.key===`Escape`&&(e.stopPropagation(),o(!1))};return document.addEventListener(`mousedown`,e),document.addEventListener(`keydown`,t),()=>{document.removeEventListener(`mousedown`,e),document.removeEventListener(`keydown`,t)}},[a]),i.length===0?(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:r,children:[e,t]}):(0,G.jsxs)(`div`,{className:`relative inline-flex`,ref:s,children:[(0,G.jsxs)(`div`,{className:`flex relative z-50`,children:[(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>{o(!1),r()},className:`rounded-r-none`,children:[e,t]}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>o(e=>!e),"aria-label":n,"aria-haspopup":`menu`,"aria-expanded":a,className:`rounded-l-none border-l border-bambu-dark px-2`,children:(0,G.jsx)(ps,{className:`w-4 h-4 transition-transform ${a?`rotate-180`:``}`})})]}),a&&(0,G.jsx)(`div`,{role:`menu`,className:`absolute right-0 top-full mt-1 w-56 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg z-50 py-1`,children:i.map(e=>(0,G.jsxs)(`button`,{type:`button`,role:`menuitem`,onClick:()=>{o(!1),e.onClick()},className:`w-full text-left px-3 py-2 text-sm text-bambu-gray-light hover:bg-bambu-dark-tertiary hover:text-white transition-colors flex items-center gap-2`,children:[(0,G.jsx)(nc,{className:`w-4 h-4 flex-shrink-0`}),e.label]},e.key))})]})}function RKe({archiveId:e,libraryFileId:t,title:n,fileType:r,onClose:i,onSliceWithBambuddy:a}){let{t:o}=U(),{showToast:s}=Gd(),{data:c}=K({queryKey:[`settings`],queryFn:Z.getSettings}),l=qG(c?.open_in_slicer,c?.preferred_slicer),u=t!=null,[d,f]=(0,y.useState)(null),[p,m]=(0,y.useState)(null),[h,g]=(0,y.useState)(!0),[_,v]=(0,y.useState)(null),[b,x]=(0,y.useState)(!1),[S,C]=(0,y.useState)(null),[w,T]=(0,y.useState)(0),[E,D]=(0,y.useState)(!1),[O,k]=(0,y.useState)(null),[A,j]=(0,y.useState)(!1),[M,N]=(0,y.useState)(!1),P=(0,y.useRef)(null),F=(0,y.useRef)(null),I=.35;(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&i()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[i]),(0,y.useEffect)(()=>{if(g(!0),u){let e=(r||``).toLowerCase(),t=e===`3mf`||e===`gcode.3mf`||e===`stl`;m({has_model:t,has_source:!1,build_volume:{x:256,y:256,z:256},filament_colors:[]}),f(t?`3d`:null),g(!1);return}if(!e){m(null),f(null),g(!1);return}Z.getArchiveCapabilities(e).then(e=>{m(e),e.has_model&&f(`3d`),g(!1)}).catch(()=>{m({has_model:!0,has_source:!1,build_volume:{x:256,y:256,z:256},filament_colors:[]}),f(`3d`),g(!1)})},[e,r,u]),(0,y.useEffect)(()=>{if(x(!0),C(null),T(0),u){let e=(r||``).toLowerCase();if(!t||!(e===`3mf`||e===`gcode.3mf`)){v(null),x(!1);return}Z.getLibraryFilePlates(t).then(e=>v(e)).catch(()=>v(null)).finally(()=>x(!1));return}if(!e){v(null),x(!1);return}Z.getArchivePlates(e).then(e=>v(e)).catch(()=>v(null)).finally(()=>x(!1))},[e,r,u,t]);let L=(0,y.useMemo)(()=>_?.plates??[],[_]),R=(_?.is_multi_plate??!1)&&L.length>1,z=E&&R,B=S==null?null:L.find(e=>e.index===S)??null,V=e=>e.object_count??e.objects?.length??0,ee=L.reduce((e,t)=>e+V(t),0),te=B?V(B):ee,ne=B?o(`modelViewer.plateNumber`,{number:B.index}):o(`modelViewer.allPlates`),re=L.length>0,ie=(0,y.useRef)(null),ae=(0,y.useRef)(null),[oe,se]=(0,y.useState)(10),[H,ce]=(0,y.useState)(3),le=L.length>oe,ue=Math.max(1,Math.ceil(L.length/oe)),de=le?L.slice(w*oe,(w+1)*oe):L;(0,y.useEffect)(()=>{if(!z){se(10),ce(3);return}let e=ie.current,t=ae.current;if(!e||!t)return;let n=0,r=()=>{let n=t.clientWidth,r=Math.floor(n/210),i=Math.max(3,Math.min(5,r||3));ce(e=>e===i?e:i);let a=window.getComputedStyle(e),o=Number.parseFloat(a.rowGap||`0`),s=e.querySelector(`button`)?.getBoundingClientRect().height??44,c=t.clientHeight,l=Math.max(1,Math.floor((c+o)/(s+o)))*i,u=Math.max(1,l-1);se(e=>e===u?e:u)},i=()=>{n&&cancelAnimationFrame(n),n=requestAnimationFrame(r)};i();let a=new ResizeObserver(i);return a.observe(t),a.observe(e),()=>{n&&cancelAnimationFrame(n),a.disconnect()}},[z,L.length]),(0,y.useEffect)(()=>{if(!le){T(0);return}T(e=>Math.min(e,ue-1))},[L.length,le,ue]),(0,y.useEffect)(()=>{if(!le||S==null)return;let e=L.findIndex(e=>e.index===S);if(e<0)return;let t=Math.floor(e/oe);T(e=>e===t?e:t)},[L,oe,S,le]),(0,y.useEffect)(()=>{if(!z){k(null),N(!1);return}if(M)return;let e=P.current,t=F.current;if(!e||!t)return;let n=e.clientHeight;if(!n)return;let r=Math.max(240,n*I),i=Math.max(160,n-10-r),a=Math.min(t.scrollHeight,i);k(Math.max(160,a))},[z,M,L.length,w,10,160,240,I]),(0,y.useEffect)(()=>{if(!A)return;let e=e=>{let t=P.current;if(!t)return;let n=t.getBoundingClientRect(),r=n.height;if(!r)return;let i=Math.max(240,r*I),a=Math.max(160,r-10-i);k(Math.min(a,Math.max(160,e.clientY-n.top)))},t=()=>{j(!1),N(!0)};return document.addEventListener(`mousemove`,e),document.addEventListener(`mouseup`,t),document.body.style.cursor=`row-resize`,document.body.style.userSelect=`none`,()=>{document.removeEventListener(`mousemove`,e),document.removeEventListener(`mouseup`,t),document.body.style.cursor=``,document.body.style.userSelect=``}},[A,10,160,240,I]);let fe=l===`orcaslicer`?[`orcaslicer`,`bambu_studio`]:[`bambu_studio`,`orcaslicer`],pe=u?fe.filter(e=>lAe(r,e)):fe,me=pe.length>0,he=pAe(r),ge=!!(u&&c?.use_slicer_api&&a&&he),_e=async r=>{if(!me)return;let i=n||`model`;try{if(u){let{token:e}=await Z.createLibrarySlicerToken(t),n=Z.getLibrarySlicerDownloadUrl(t,e,i);ZG(`${window.location.origin}${n}`,r)}else{let{token:t}=await Z.createArchiveSlicerToken(e),n=Z.getArchiveSlicerDownloadUrl(e,t,i);ZG(`${window.location.origin}${n}`,r)}}catch{s(o(`modelViewer.openInSlicerFailed`),`error`),ZG(u?`${window.location.origin}${Z.getLibraryFileDownloadUrl(t)}`:`${window.location.origin}${Z.getArchiveForSlicer(e,i)}`,r)}},ve=ge?pe:pe.slice(1),ye=e=>o(e===`orcaslicer`?`settings.slicerOrcaSlicer`:`settings.slicerBambuStudio`),be=ve.map(e=>({key:e,label:o(`modelViewer.openInSlicerWith`,{slicer:ye(e)}),onClick:()=>_e(e)}));return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 ${E?`p-0`:`p-8`}`,onClick:i,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary w-full flex flex-col ${E?`h-full max-w-none rounded-none`:`h-[80vh] max-w-4xl rounded-xl`}`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 min-w-0 flex-1 mr-4`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white truncate`,children:n}),re&&(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray bg-bambu-dark-tertiary/70 px-2 py-1 rounded whitespace-nowrap`,children:[ne,`: `,o(`modelViewer.objectCount`,{count:te})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[ge?(0,G.jsx)(LKe,{icon:(0,G.jsx)(Rs,{className:`w-4 h-4`}),label:o(`slice.action`),dropdownLabel:o(`modelViewer.moreSlicerOptions`),onPrimary:()=>a?.(),items:be}):me?(0,G.jsx)(LKe,{icon:(0,G.jsx)(nc,{className:`w-4 h-4`}),label:pe[0]===l?o(`modelViewer.openInSlicer`):o(`modelViewer.openInSlicerWith`,{slicer:ye(pe[0])}),dropdownLabel:o(`modelViewer.moreSlicerOptions`),onPrimary:()=>_e(pe[0]),items:be}):(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,disabled:!0,children:[(0,G.jsx)(nc,{className:`w-4 h-4`}),o(`modelViewer.openInSlicer`)]}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>D(e=>!e),title:E?`Exit fullscreen`:`Enter fullscreen`,children:E?(0,G.jsx)(dl,{className:`w-4 h-4`}):(0,G.jsx)(sl,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:i,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]})]}),p&&(0,G.jsx)(`div`,{className:`flex border-b border-bambu-dark-tertiary`,children:(0,G.jsxs)(`button`,{onClick:()=>p.has_model&&f(`3d`),disabled:!p.has_model,className:`flex items-center gap-2 px-6 py-3 text-sm font-medium transition-colors ${d===`3d`?`text-bambu-green border-b-2 border-bambu-green`:p.has_model?`text-bambu-gray hover:text-white`:`text-bambu-gray/30 cursor-not-allowed`}`,children:[(0,G.jsx)(Zo,{className:`w-4 h-4`}),o(`modelViewer.tabs.model`),!p.has_model&&(0,G.jsxs)(`span`,{className:`text-xs`,children:[`(`,o(`modelViewer.notAvailable`),`)`]})]})}),(0,G.jsx)(`div`,{className:`flex-1 overflow-hidden p-4`,children:h?(0,G.jsx)(`div`,{className:`w-full h-full flex items-center justify-center`,children:(0,G.jsx)(Y,{className:`w-8 h-8 animate-spin text-bambu-green`})}):d===`3d`&&p?(0,G.jsxs)(`div`,{ref:P,className:`w-full h-full flex flex-col ${z?`gap-0 min-h-0`:`gap-3`}`,children:[R&&(0,G.jsxs)(`div`,{ref:F,style:z&&O!=null?{height:O}:void 0,className:`rounded-lg border border-bambu-dark-tertiary bg-bambu-dark p-3 ${z?`flex flex-col shrink-0`:``}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray mb-2`,children:[(0,G.jsx)(qc,{className:`w-4 h-4`}),o(`modelViewer.plates`),b&&(0,G.jsx)(Y,{className:`w-3 h-3 animate-spin`})]}),(0,G.jsxs)(`div`,{className:z?`flex flex-col min-h-0 flex-1`:void 0,children:[(0,G.jsx)(`div`,{ref:ae,className:z?`min-h-0 overflow-hidden pr-1 flex-1`:void 0,children:(0,G.jsxs)(`div`,{ref:ie,className:z?`grid gap-2`:`grid grid-cols-2 md:grid-cols-3 gap-2`,style:z?{gridTemplateColumns:`repeat(${H}, minmax(0, 1fr))`}:void 0,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>C(null),className:`flex items-center rounded-lg border text-left transition-colors ${z?`gap-1.5 p-1.5 w-full`:`gap-2 p-2`} ${S==null?`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary bg-bambu-dark-secondary hover:border-bambu-gray`}`,children:[(0,G.jsx)(`div`,{className:`rounded bg-bambu-dark-tertiary flex items-center justify-center ${z?`w-8 h-8`:`w-10 h-10`}`,children:(0,G.jsx)(qc,{className:`${z?`w-4 h-4`:`w-5 h-5`} text-bambu-gray`})}),(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`p`,{className:`${z?`text-xs`:`text-sm`} text-white font-medium truncate`,children:o(`modelViewer.allPlates`)}),(0,G.jsx)(`p`,{className:`${z?`text-[10px]`:`text-xs`} text-bambu-gray truncate`,children:o(`modelViewer.plateCount`,{count:L.length})})]}),S==null&&(0,G.jsx)(fs,{className:`${z?`w-3.5 h-3.5`:`w-4 h-4`} text-bambu-green flex-shrink-0`})]}),de.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>C(e.index),className:`flex items-center rounded-lg border text-left transition-colors ${z?`gap-1.5 p-1.5 w-full`:`gap-2 p-2`} ${S===e.index?`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary bg-bambu-dark-secondary hover:border-bambu-gray`}`,children:[e.has_thumbnail&&e.thumbnail_url?(0,G.jsx)(`img`,{src:_d(e.thumbnail_url),alt:`Plate ${e.index}`,className:`${z?`w-8 h-8`:`w-10 h-10`} rounded object-cover bg-bambu-dark-tertiary`}):(0,G.jsx)(`div`,{className:`rounded bg-bambu-dark-tertiary flex items-center justify-center ${z?`w-8 h-8`:`w-10 h-10`}`,children:(0,G.jsx)(qc,{className:`${z?`w-4 h-4`:`w-5 h-5`} text-bambu-gray`})}),(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`p`,{className:`${z?`text-xs`:`text-sm`} text-white font-medium truncate`,children:e.name||o(`modelViewer.plateNumber`,{number:e.index})}),(0,G.jsx)(`p`,{className:`${z?`text-[10px]`:`text-xs`} text-bambu-gray truncate`,children:o(`modelViewer.objectCount`,{count:e.object_count??e.objects?.length??0})})]}),S===e.index&&(0,G.jsx)(fs,{className:`${z?`w-3.5 h-3.5`:`w-4 h-4`} text-bambu-green flex-shrink-0`})]},e.index))]})}),(B||le)&&(0,G.jsxs)(`div`,{className:`mt-auto pt-3 flex items-center gap-4 text-xs text-bambu-gray overflow-x-auto`,children:[B&&(0,G.jsxs)(`div`,{className:`flex items-center gap-3 whitespace-nowrap`,children:[(0,G.jsx)(`span`,{children:o(`modelViewer.plateNumber`,{number:B.index})}),B.print_time_seconds!=null&&(0,G.jsx)(`span`,{children:o(`modelViewer.eta`,{minutes:Math.round(B.print_time_seconds/60)})}),B.filament_used_grams!=null&&(0,G.jsxs)(`span`,{children:[B.filament_used_grams.toFixed(1),` g`]}),B.filaments.length>0&&(0,G.jsx)(`span`,{children:o(`modelViewer.filamentCount`,{count:B.filaments.length})})]}),le&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 whitespace-nowrap ${B?`ml-auto`:``}`,children:[(0,G.jsx)(`span`,{children:o(`modelViewer.pagination.pageOf`,{current:w+1,total:ue})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>T(e=>Math.max(e-1,0)),disabled:w===0,className:`px-2 py-1 rounded border text-xs ${w===0?`border-bambu-dark-tertiary text-bambu-gray/40 cursor-not-allowed`:`border-bambu-dark-tertiary text-bambu-gray hover:text-white hover:border-bambu-gray`}`,children:o(`modelViewer.pagination.prev`)}),(()=>{let e=Math.max(0,w-2),t=Math.min(ue,e+5);t-e<5&&(e=Math.max(0,t-5));let n=Array.from({length:t-e},(t,n)=>e+n);return(0,G.jsxs)(G.Fragment,{children:[e>0&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>T(0),className:`px-2 py-1 rounded border text-xs ${w===0?`border-bambu-green text-bambu-green`:`border-bambu-dark-tertiary text-bambu-gray hover:text-white hover:border-bambu-gray`}`,children:`1`}),e>1&&(0,G.jsx)(`span`,{className:`px-1`,children:`…`}),n.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>T(e),className:`px-2 py-1 rounded border text-xs ${w===e?`border-bambu-green text-bambu-green`:`border-bambu-dark-tertiary text-bambu-gray hover:text-white hover:border-bambu-gray`}`,children:e+1},e)),t<ue-1&&(0,G.jsx)(`span`,{className:`px-1`,children:`…`}),t<ue&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>T(ue-1),className:`px-2 py-1 rounded border text-xs ${w===ue-1?`border-bambu-green text-bambu-green`:`border-bambu-dark-tertiary text-bambu-gray hover:text-white hover:border-bambu-gray`}`,children:ue})]})})(),(0,G.jsx)(`button`,{type:`button`,onClick:()=>T(e=>Math.min(e+1,ue-1)),disabled:w>=ue-1,className:`px-2 py-1 rounded border text-xs ${w>=ue-1?`border-bambu-dark-tertiary text-bambu-gray/40 cursor-not-allowed`:`border-bambu-dark-tertiary text-bambu-gray hover:text-white hover:border-bambu-gray`}`,children:o(`modelViewer.pagination.next`)})]})]})]})]})]}),z&&(0,G.jsx)(`div`,{role:`separator`,"aria-orientation":`horizontal`,onMouseDown:e=>{e.preventDefault(),j(!0),N(!0)},className:`h-2 cursor-row-resize flex items-center justify-center ${A?`bg-bambu-dark-tertiary`:`bg-bambu-dark-secondary/60 hover:bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(`div`,{className:`w-12 h-1 rounded-full bg-bambu-gray/50`})}),(0,G.jsx)(`div`,{className:`flex-1 ${z?`min-h-0`:``}`,children:(0,G.jsx)(lT,{url:u?Z.getLibraryFileDownloadUrl(t):p.has_source?Z.getSource3mfDownloadUrl(e):Z.getArchiveDownload(e),fileType:r,buildVolume:p.build_volume,filamentColors:p.filament_colors,selectedPlateId:S,className:`w-full h-full`})})]}):(0,G.jsx)(`div`,{className:`w-full h-full flex items-center justify-center text-bambu-gray`,children:o(`modelViewer.noPreview`)})})]})})}var z5=[`library-tags`];function zKe({open:e,fileIds:t,onClose:n}){let{t:r}=U(),i=co(),{showToast:a}=Gd(),[o,s]=(0,y.useState)(`add`),[c,l]=(0,y.useState)(new Set),[u,d]=(0,y.useState)(``),[f,p]=(0,y.useState)(``);(0,y.useEffect)(()=>{e||(s(`add`),l(new Set),d(``),p(``))},[e]);let{data:m=[],isLoading:h}=K({queryKey:z5,queryFn:Z.getLibraryTags,enabled:e}),g=(0,y.useMemo)(()=>{let e=u.trim().toLowerCase();return e?m.filter(t=>t.name.toLowerCase().includes(e)):m},[m,u]),_=e=>{l(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},v=q({mutationFn:e=>Z.createLibraryTag(e),onSuccess:e=>{l(t=>new Set(t).add(e.id)),p(``),i.invalidateQueries({queryKey:z5})},onError:e=>{a(e.message||r(`fileManager.tags.saveFailed`),`error`)}}),b=q({mutationFn:()=>Z.bulkAssignLibraryTags(t,Array.from(c),o),onSuccess:e=>{a(o===`add`?r(`fileManager.tags.applyAddSuccess`,{count:e.associations_added,files:e.files_updated}):r(`fileManager.tags.applyRemoveSuccess`,{count:e.associations_removed,files:e.files_updated}),`success`),i.invalidateQueries({queryKey:[`library-files`]}),i.invalidateQueries({queryKey:z5}),n()},onError:e=>{a(e.message||r(`fileManager.tags.applyFailed`),`error`)}});if((0,y.useEffect)(()=>{if(!e)return;let t=e=>{e.key===`Escape`&&!b.isPending&&!v.isPending&&n()};return document.addEventListener(`keydown`,t),()=>document.removeEventListener(`keydown`,t)},[e,n,b.isPending,v.isPending]),!e)return null;let x=!f.trim()||v.isPending||m.some(e=>e.name.toLowerCase()===f.trim().toLowerCase()),S=`bulk-tags-picker-title`;return(0,G.jsxs)(`div`,{className:`fixed inset-0 z-[60] flex items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60`,onClick:()=>!b.isPending&&n()}),(0,G.jsxs)(`div`,{className:`relative w-full max-w-md mx-4 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-2xl max-h-[90vh] flex flex-col`,role:`dialog`,"aria-modal":`true`,"aria-labelledby":S,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-4 px-5 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`h3`,{id:S,className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Tu,{className:`w-4 h-4 text-bambu-green`}),r(`fileManager.tags.bulkTitle`,{count:t.length})]}),(0,G.jsx)(`button`,{type:`button`,className:`p-1.5 text-bambu-gray hover:text-white rounded`,onClick:n,"aria-label":r(`common.close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`px-5 py-3 border-b border-bambu-dark-tertiary flex gap-4 text-sm`,children:[(0,G.jsxs)(`label`,{className:`flex items-center gap-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`radio`,name:`bulk-action`,checked:o===`add`,onChange:()=>s(`add`),className:`accent-bambu-green`}),(0,G.jsx)(`span`,{className:`text-white`,children:r(`fileManager.tags.actionAdd`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`radio`,name:`bulk-action`,checked:o===`remove`,onChange:()=>s(`remove`),className:`accent-bambu-green`}),(0,G.jsx)(`span`,{className:`text-white`,children:r(`fileManager.tags.actionRemove`)})]})]}),(0,G.jsx)(`div`,{className:`px-5 py-3 border-b border-bambu-dark-tertiary`,children:(0,G.jsx)(`input`,{type:`text`,value:u,onChange:e=>d(e.target.value),placeholder:r(`fileManager.tags.searchPlaceholder`),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`})}),(0,G.jsx)(`div`,{className:`overflow-y-auto flex-1 min-h-[8rem] max-h-[24rem]`,children:h?(0,G.jsxs)(`div`,{className:`flex items-center justify-center py-12 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-5 h-5 animate-spin mr-2`}),r(`common.loading`)]}):g.length===0?(0,G.jsx)(`div`,{className:`py-12 text-center text-bambu-gray text-sm`,children:m.length===0?r(`fileManager.tags.empty`):r(`fileManager.tags.noMatches`)}):(0,G.jsx)(`ul`,{className:`divide-y divide-bambu-dark-tertiary/40`,children:g.map(e=>(0,G.jsx)(`li`,{children:(0,G.jsxs)(`label`,{className:`flex items-center gap-3 px-5 py-2 hover:bg-bambu-dark-tertiary/30 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:c.has(e.id),onChange:()=>_(e.id),className:`accent-bambu-green`}),(0,G.jsx)(`span`,{className:`text-sm text-white truncate flex-1`,children:e.name}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:e.file_count})]})},e.id))})}),o===`add`&&(0,G.jsxs)(`div`,{className:`px-5 py-3 border-t border-bambu-dark-tertiary flex gap-2`,children:[(0,G.jsx)(`input`,{type:`text`,value:f,onChange:e=>p(e.target.value),placeholder:r(`fileManager.tags.createPlaceholder`),maxLength:64,className:`flex-1 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,onKeyDown:e=>{e.key===`Enter`&&!x&&(e.preventDefault(),v.mutate(f.trim()))}}),(0,G.jsxs)(Q,{type:`button`,variant:`secondary`,onClick:()=>v.mutate(f.trim()),disabled:x,children:[v.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Pl,{className:`w-4 h-4`}),r(`fileManager.tags.createButton`)]})]}),(0,G.jsxs)(`div`,{className:`px-5 py-4 border-t border-bambu-dark-tertiary flex justify-end gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:n,disabled:b.isPending,children:r(`common.cancel`)}),(0,G.jsxs)(Q,{type:`button`,onClick:()=>b.mutate(),disabled:c.size===0||b.isPending||t.length===0,children:[b.isPending&&(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),r(o===`add`?`fileManager.tags.applyAdd`:`fileManager.tags.applyRemove`)]})]})]})]})}function BKe(e,t){let n=t||{};return(e[e.length-1]===``?[...e,``]:e).join((n.padRight?` `:``)+`,`+(n.padLeft===!1?``:` `)).trim()}var VKe=/^[$_\p{ID_Start}][$_\u{200C}\u{200D}\p{ID_Continue}]*$/u,HKe=/^[$_\p{ID_Start}][-$_\u{200C}\u{200D}\p{ID_Continue}]*$/u,UKe={};function WKe(e,t){return((t||UKe).jsx?HKe:VKe).test(e)}var GKe=/[ \t\n\f\r]/g;function KKe(e){return typeof e==`object`?e.type===`text`?qKe(e.value):!1:qKe(e)}function qKe(e){return e.replace(GKe,``)===``}var B5=class{constructor(e,t,n){this.normal=t,this.property=e,n&&(this.space=n)}};B5.prototype.normal={},B5.prototype.property={},B5.prototype.space=void 0;function JKe(e,t){let n={},r={};for(let t of e)Object.assign(n,t.property),Object.assign(r,t.normal);return new B5(n,r,t)}function V5(e){return e.toLowerCase()}var H5=class{constructor(e,t){this.attribute=t,this.property=e}};H5.prototype.attribute=``,H5.prototype.booleanish=!1,H5.prototype.boolean=!1,H5.prototype.commaOrSpaceSeparated=!1,H5.prototype.commaSeparated=!1,H5.prototype.defined=!1,H5.prototype.mustUseProperty=!1,H5.prototype.number=!1,H5.prototype.overloadedBoolean=!1,H5.prototype.property=``,H5.prototype.spaceSeparated=!1,H5.prototype.space=void 0;var U5=s({boolean:()=>W5,booleanish:()=>G5,commaOrSpaceSeparated:()=>X5,commaSeparated:()=>Y5,number:()=>q5,overloadedBoolean:()=>K5,spaceSeparated:()=>J5}),YKe=0,W5=Z5(),G5=Z5(),K5=Z5(),q5=Z5(),J5=Z5(),Y5=Z5(),X5=Z5();function Z5(){return 2**++YKe}var Q5=Object.keys(U5),$5=class extends H5{constructor(e,t,n,r){let i=-1;if(super(e,t),XKe(this,`space`,r),typeof n==`number`)for(;++i<Q5.length;){let e=Q5[i];XKe(this,Q5[i],(n&U5[e])===U5[e])}}};$5.prototype.defined=!0;function XKe(e,t,n){n&&(e[t]=n)}function e7(e){let t={},n={};for(let[r,i]of Object.entries(e.properties)){let a=new $5(r,e.transform(e.attributes||{},r),i,e.space);e.mustUseProperty&&e.mustUseProperty.includes(r)&&(a.mustUseProperty=!0),t[r]=a,n[V5(r)]=r,n[V5(a.attribute)]=r}return new B5(t,n,e.space)}var ZKe=e7({properties:{ariaActiveDescendant:null,ariaAtomic:G5,ariaAutoComplete:null,ariaBusy:G5,ariaChecked:G5,ariaColCount:q5,ariaColIndex:q5,ariaColSpan:q5,ariaControls:J5,ariaCurrent:null,ariaDescribedBy:J5,ariaDetails:null,ariaDisabled:G5,ariaDropEffect:J5,ariaErrorMessage:null,ariaExpanded:G5,ariaFlowTo:J5,ariaGrabbed:G5,ariaHasPopup:null,ariaHidden:G5,ariaInvalid:null,ariaKeyShortcuts:null,ariaLabel:null,ariaLabelledBy:J5,ariaLevel:q5,ariaLive:null,ariaModal:G5,ariaMultiLine:G5,ariaMultiSelectable:G5,ariaOrientation:null,ariaOwns:J5,ariaPlaceholder:null,ariaPosInSet:q5,ariaPressed:G5,ariaReadOnly:G5,ariaRelevant:null,ariaRequired:G5,ariaRoleDescription:J5,ariaRowCount:q5,ariaRowIndex:q5,ariaRowSpan:q5,ariaSelected:G5,ariaSetSize:q5,ariaSort:null,ariaValueMax:q5,ariaValueMin:q5,ariaValueNow:q5,ariaValueText:null,role:null},transform(e,t){return t===`role`?t:`aria-`+t.slice(4).toLowerCase()}});function QKe(e,t){return t in e?e[t]:t}function $Ke(e,t){return QKe(e,t.toLowerCase())}var eqe=e7({attributes:{acceptcharset:`accept-charset`,classname:`class`,htmlfor:`for`,httpequiv:`http-equiv`},mustUseProperty:[`checked`,`multiple`,`muted`,`selected`],properties:{abbr:null,accept:Y5,acceptCharset:J5,accessKey:J5,action:null,allow:null,allowFullScreen:W5,allowPaymentRequest:W5,allowUserMedia:W5,alpha:W5,alt:null,as:null,async:W5,autoCapitalize:null,autoComplete:J5,autoFocus:W5,autoPlay:W5,blocking:J5,capture:null,charSet:null,checked:W5,cite:null,className:J5,closedBy:null,colorSpace:null,cols:q5,colSpan:q5,command:null,commandFor:null,content:null,contentEditable:G5,controls:W5,controlsList:J5,coords:q5|Y5,crossOrigin:null,data:null,dateTime:null,decoding:null,default:W5,defer:W5,dir:null,dirName:null,disabled:W5,download:K5,draggable:G5,encType:null,enterKeyHint:null,fetchPriority:null,form:null,formAction:null,formEncType:null,formMethod:null,formNoValidate:W5,formTarget:null,headers:J5,height:q5,hidden:K5,high:q5,href:null,hrefLang:null,htmlFor:J5,httpEquiv:J5,id:null,imageSizes:null,imageSrcSet:null,inert:W5,inputMode:null,integrity:null,is:null,isMap:W5,itemId:null,itemProp:J5,itemRef:J5,itemScope:W5,itemType:J5,kind:null,label:null,lang:null,language:null,list:null,loading:null,loop:W5,low:q5,manifest:null,max:null,maxLength:q5,media:null,method:null,min:null,minLength:q5,multiple:W5,muted:W5,name:null,nonce:null,noModule:W5,noValidate:W5,onAbort:null,onAfterPrint:null,onAuxClick:null,onBeforeMatch:null,onBeforePrint:null,onBeforeToggle:null,onBeforeUnload:null,onBlur:null,onCancel:null,onCanPlay:null,onCanPlayThrough:null,onChange:null,onClick:null,onClose:null,onContextLost:null,onContextMenu:null,onContextRestored:null,onCopy:null,onCueChange:null,onCut:null,onDblClick:null,onDrag:null,onDragEnd:null,onDragEnter:null,onDragExit:null,onDragLeave:null,onDragOver:null,onDragStart:null,onDrop:null,onDurationChange:null,onEmptied:null,onEnded:null,onError:null,onFocus:null,onFormData:null,onHashChange:null,onInput:null,onInvalid:null,onKeyDown:null,onKeyPress:null,onKeyUp:null,onLanguageChange:null,onLoad:null,onLoadedData:null,onLoadedMetadata:null,onLoadEnd:null,onLoadStart:null,onMessage:null,onMessageError:null,onMouseDown:null,onMouseEnter:null,onMouseLeave:null,onMouseMove:null,onMouseOut:null,onMouseOver:null,onMouseUp:null,onOffline:null,onOnline:null,onPageHide:null,onPageShow:null,onPaste:null,onPause:null,onPlay:null,onPlaying:null,onPopState:null,onProgress:null,onRateChange:null,onRejectionHandled:null,onReset:null,onResize:null,onScroll:null,onScrollEnd:null,onSecurityPolicyViolation:null,onSeeked:null,onSeeking:null,onSelect:null,onSlotChange:null,onStalled:null,onStorage:null,onSubmit:null,onSuspend:null,onTimeUpdate:null,onToggle:null,onUnhandledRejection:null,onUnload:null,onVolumeChange:null,onWaiting:null,onWheel:null,open:W5,optimum:q5,pattern:null,ping:J5,placeholder:null,playsInline:W5,popover:null,popoverTarget:null,popoverTargetAction:null,poster:null,preload:null,readOnly:W5,referrerPolicy:null,rel:J5,required:W5,reversed:W5,rows:q5,rowSpan:q5,sandbox:J5,scope:null,scoped:W5,seamless:W5,selected:W5,shadowRootClonable:W5,shadowRootCustomElementRegistry:W5,shadowRootDelegatesFocus:W5,shadowRootMode:null,shadowRootSerializable:W5,shape:null,size:q5,sizes:null,slot:null,span:q5,spellCheck:G5,src:null,srcDoc:null,srcLang:null,srcSet:null,start:q5,step:null,style:null,tabIndex:q5,target:null,title:null,translate:null,type:null,typeMustMatch:W5,useMap:null,value:G5,width:q5,wrap:null,writingSuggestions:null,align:null,aLink:null,archive:J5,axis:null,background:null,bgColor:null,border:q5,borderColor:null,bottomMargin:q5,cellPadding:null,cellSpacing:null,char:null,charOff:null,classId:null,clear:null,code:null,codeBase:null,codeType:null,color:null,compact:W5,declare:W5,event:null,face:null,frame:null,frameBorder:null,hSpace:q5,leftMargin:q5,link:null,longDesc:null,lowSrc:null,marginHeight:q5,marginWidth:q5,noResize:W5,noHref:W5,noShade:W5,noWrap:W5,object:null,profile:null,prompt:null,rev:null,rightMargin:q5,rules:null,scheme:null,scrolling:G5,standby:null,summary:null,text:null,topMargin:q5,valueType:null,version:null,vAlign:null,vLink:null,vSpace:q5,allowTransparency:null,autoCorrect:null,autoSave:null,credentialless:W5,disablePictureInPicture:W5,disableRemotePlayback:W5,exportParts:Y5,part:J5,prefix:null,property:null,results:q5,security:null,unselectable:null},space:`html`,transform:$Ke}),tqe=e7({attributes:{accentHeight:`accent-height`,alignmentBaseline:`alignment-baseline`,arabicForm:`arabic-form`,baselineShift:`baseline-shift`,capHeight:`cap-height`,className:`class`,clipPath:`clip-path`,clipRule:`clip-rule`,colorInterpolation:`color-interpolation`,colorInterpolationFilters:`color-interpolation-filters`,colorProfile:`color-profile`,colorRendering:`color-rendering`,crossOrigin:`crossorigin`,dataType:`datatype`,dominantBaseline:`dominant-baseline`,enableBackground:`enable-background`,fillOpacity:`fill-opacity`,fillRule:`fill-rule`,floodColor:`flood-color`,floodOpacity:`flood-opacity`,fontFamily:`font-family`,fontSize:`font-size`,fontSizeAdjust:`font-size-adjust`,fontStretch:`font-stretch`,fontStyle:`font-style`,fontVariant:`font-variant`,fontWeight:`font-weight`,glyphName:`glyph-name`,glyphOrientationHorizontal:`glyph-orientation-horizontal`,glyphOrientationVertical:`glyph-orientation-vertical`,hrefLang:`hreflang`,horizAdvX:`horiz-adv-x`,horizOriginX:`horiz-origin-x`,horizOriginY:`horiz-origin-y`,imageRendering:`image-rendering`,letterSpacing:`letter-spacing`,lightingColor:`lighting-color`,markerEnd:`marker-end`,markerMid:`marker-mid`,markerStart:`marker-start`,maskType:`mask-type`,navDown:`nav-down`,navDownLeft:`nav-down-left`,navDownRight:`nav-down-right`,navLeft:`nav-left`,navNext:`nav-next`,navPrev:`nav-prev`,navRight:`nav-right`,navUp:`nav-up`,navUpLeft:`nav-up-left`,navUpRight:`nav-up-right`,onAbort:`onabort`,onActivate:`onactivate`,onAfterPrint:`onafterprint`,onBeforePrint:`onbeforeprint`,onBegin:`onbegin`,onCancel:`oncancel`,onCanPlay:`oncanplay`,onCanPlayThrough:`oncanplaythrough`,onChange:`onchange`,onClick:`onclick`,onClose:`onclose`,onCopy:`oncopy`,onCueChange:`oncuechange`,onCut:`oncut`,onDblClick:`ondblclick`,onDrag:`ondrag`,onDragEnd:`ondragend`,onDragEnter:`ondragenter`,onDragExit:`ondragexit`,onDragLeave:`ondragleave`,onDragOver:`ondragover`,onDragStart:`ondragstart`,onDrop:`ondrop`,onDurationChange:`ondurationchange`,onEmptied:`onemptied`,onEnd:`onend`,onEnded:`onended`,onError:`onerror`,onFocus:`onfocus`,onFocusIn:`onfocusin`,onFocusOut:`onfocusout`,onHashChange:`onhashchange`,onInput:`oninput`,onInvalid:`oninvalid`,onKeyDown:`onkeydown`,onKeyPress:`onkeypress`,onKeyUp:`onkeyup`,onLoad:`onload`,onLoadedData:`onloadeddata`,onLoadedMetadata:`onloadedmetadata`,onLoadStart:`onloadstart`,onMessage:`onmessage`,onMouseDown:`onmousedown`,onMouseEnter:`onmouseenter`,onMouseLeave:`onmouseleave`,onMouseMove:`onmousemove`,onMouseOut:`onmouseout`,onMouseOver:`onmouseover`,onMouseUp:`onmouseup`,onMouseWheel:`onmousewheel`,onOffline:`onoffline`,onOnline:`ononline`,onPageHide:`onpagehide`,onPageShow:`onpageshow`,onPaste:`onpaste`,onPause:`onpause`,onPlay:`onplay`,onPlaying:`onplaying`,onPopState:`onpopstate`,onProgress:`onprogress`,onRateChange:`onratechange`,onRepeat:`onrepeat`,onReset:`onreset`,onResize:`onresize`,onScroll:`onscroll`,onSeeked:`onseeked`,onSeeking:`onseeking`,onSelect:`onselect`,onShow:`onshow`,onStalled:`onstalled`,onStorage:`onstorage`,onSubmit:`onsubmit`,onSuspend:`onsuspend`,onTimeUpdate:`ontimeupdate`,onToggle:`ontoggle`,onUnload:`onunload`,onVolumeChange:`onvolumechange`,onWaiting:`onwaiting`,onZoom:`onzoom`,overlinePosition:`overline-position`,overlineThickness:`overline-thickness`,paintOrder:`paint-order`,panose1:`panose-1`,pointerEvents:`pointer-events`,referrerPolicy:`referrerpolicy`,renderingIntent:`rendering-intent`,shapeRendering:`shape-rendering`,stopColor:`stop-color`,stopOpacity:`stop-opacity`,strikethroughPosition:`strikethrough-position`,strikethroughThickness:`strikethrough-thickness`,strokeDashArray:`stroke-dasharray`,strokeDashOffset:`stroke-dashoffset`,strokeLineCap:`stroke-linecap`,strokeLineJoin:`stroke-linejoin`,strokeMiterLimit:`stroke-miterlimit`,strokeOpacity:`stroke-opacity`,strokeWidth:`stroke-width`,tabIndex:`tabindex`,textAnchor:`text-anchor`,textDecoration:`text-decoration`,textRendering:`text-rendering`,transformOrigin:`transform-origin`,typeOf:`typeof`,underlinePosition:`underline-position`,underlineThickness:`underline-thickness`,unicodeBidi:`unicode-bidi`,unicodeRange:`unicode-range`,unitsPerEm:`units-per-em`,vAlphabetic:`v-alphabetic`,vHanging:`v-hanging`,vIdeographic:`v-ideographic`,vMathematical:`v-mathematical`,vectorEffect:`vector-effect`,vertAdvY:`vert-adv-y`,vertOriginX:`vert-origin-x`,vertOriginY:`vert-origin-y`,wordSpacing:`word-spacing`,writingMode:`writing-mode`,xHeight:`x-height`,playbackOrder:`playbackorder`,timelineBegin:`timelinebegin`},properties:{about:X5,accentHeight:q5,accumulate:null,additive:null,alignmentBaseline:null,alphabetic:q5,amplitude:q5,arabicForm:null,ascent:q5,attributeName:null,attributeType:null,azimuth:q5,bandwidth:null,baselineShift:null,baseFrequency:null,baseProfile:null,bbox:null,begin:null,bias:q5,by:null,calcMode:null,capHeight:q5,className:J5,clip:null,clipPath:null,clipPathUnits:null,clipRule:null,color:null,colorInterpolation:null,colorInterpolationFilters:null,colorProfile:null,colorRendering:null,content:null,contentScriptType:null,contentStyleType:null,crossOrigin:null,cursor:null,cx:null,cy:null,d:null,dataType:null,defaultAction:null,descent:q5,diffuseConstant:q5,direction:null,display:null,dur:null,divisor:q5,dominantBaseline:null,download:W5,dx:null,dy:null,edgeMode:null,editable:null,elevation:q5,enableBackground:null,end:null,event:null,exponent:q5,externalResourcesRequired:null,fill:null,fillOpacity:q5,fillRule:null,filter:null,filterRes:null,filterUnits:null,floodColor:null,floodOpacity:null,focusable:null,focusHighlight:null,fontFamily:null,fontSize:null,fontSizeAdjust:null,fontStretch:null,fontStyle:null,fontVariant:null,fontWeight:null,format:null,fr:null,from:null,fx:null,fy:null,g1:Y5,g2:Y5,glyphName:Y5,glyphOrientationHorizontal:null,glyphOrientationVertical:null,glyphRef:null,gradientTransform:null,gradientUnits:null,handler:null,hanging:q5,hatchContentUnits:null,hatchUnits:null,height:null,href:null,hrefLang:null,horizAdvX:q5,horizOriginX:q5,horizOriginY:q5,id:null,ideographic:q5,imageRendering:null,initialVisibility:null,in:null,in2:null,intercept:q5,k:q5,k1:q5,k2:q5,k3:q5,k4:q5,kernelMatrix:X5,kernelUnitLength:null,keyPoints:null,keySplines:null,keyTimes:null,kerning:null,lang:null,lengthAdjust:null,letterSpacing:null,lightingColor:null,limitingConeAngle:q5,local:null,markerEnd:null,markerMid:null,markerStart:null,markerHeight:null,markerUnits:null,markerWidth:null,mask:null,maskContentUnits:null,maskType:null,maskUnits:null,mathematical:null,max:null,media:null,mediaCharacterEncoding:null,mediaContentEncodings:null,mediaSize:q5,mediaTime:null,method:null,min:null,mode:null,name:null,navDown:null,navDownLeft:null,navDownRight:null,navLeft:null,navNext:null,navPrev:null,navRight:null,navUp:null,navUpLeft:null,navUpRight:null,numOctaves:null,observer:null,offset:null,onAbort:null,onActivate:null,onAfterPrint:null,onBeforePrint:null,onBegin:null,onCancel:null,onCanPlay:null,onCanPlayThrough:null,onChange:null,onClick:null,onClose:null,onCopy:null,onCueChange:null,onCut:null,onDblClick:null,onDrag:null,onDragEnd:null,onDragEnter:null,onDragExit:null,onDragLeave:null,onDragOver:null,onDragStart:null,onDrop:null,onDurationChange:null,onEmptied:null,onEnd:null,onEnded:null,onError:null,onFocus:null,onFocusIn:null,onFocusOut:null,onHashChange:null,onInput:null,onInvalid:null,onKeyDown:null,onKeyPress:null,onKeyUp:null,onLoad:null,onLoadedData:null,onLoadedMetadata:null,onLoadStart:null,onMessage:null,onMouseDown:null,onMouseEnter:null,onMouseLeave:null,onMouseMove:null,onMouseOut:null,onMouseOver:null,onMouseUp:null,onMouseWheel:null,onOffline:null,onOnline:null,onPageHide:null,onPageShow:null,onPaste:null,onPause:null,onPlay:null,onPlaying:null,onPopState:null,onProgress:null,onRateChange:null,onRepeat:null,onReset:null,onResize:null,onScroll:null,onSeeked:null,onSeeking:null,onSelect:null,onShow:null,onStalled:null,onStorage:null,onSubmit:null,onSuspend:null,onTimeUpdate:null,onToggle:null,onUnload:null,onVolumeChange:null,onWaiting:null,onZoom:null,opacity:null,operator:null,order:null,orient:null,orientation:null,origin:null,overflow:null,overlay:null,overlinePosition:q5,overlineThickness:q5,paintOrder:null,panose1:null,path:null,pathLength:q5,patternContentUnits:null,patternTransform:null,patternUnits:null,phase:null,ping:J5,pitch:null,playbackOrder:null,pointerEvents:null,points:null,pointsAtX:q5,pointsAtY:q5,pointsAtZ:q5,preserveAlpha:null,preserveAspectRatio:null,primitiveUnits:null,propagate:null,property:X5,r:null,radius:null,referrerPolicy:null,refX:null,refY:null,rel:X5,rev:X5,renderingIntent:null,repeatCount:null,repeatDur:null,requiredExtensions:X5,requiredFeatures:X5,requiredFonts:X5,requiredFormats:X5,resource:null,restart:null,result:null,rotate:null,rx:null,ry:null,scale:null,seed:null,shapeRendering:null,side:null,slope:null,snapshotTime:null,specularConstant:q5,specularExponent:q5,spreadMethod:null,spacing:null,startOffset:null,stdDeviation:null,stemh:null,stemv:null,stitchTiles:null,stopColor:null,stopOpacity:null,strikethroughPosition:q5,strikethroughThickness:q5,string:null,stroke:null,strokeDashArray:X5,strokeDashOffset:null,strokeLineCap:null,strokeLineJoin:null,strokeMiterLimit:q5,strokeOpacity:q5,strokeWidth:null,style:null,surfaceScale:q5,syncBehavior:null,syncBehaviorDefault:null,syncMaster:null,syncTolerance:null,syncToleranceDefault:null,systemLanguage:X5,tabIndex:q5,tableValues:null,target:null,targetX:q5,targetY:q5,textAnchor:null,textDecoration:null,textRendering:null,textLength:null,timelineBegin:null,title:null,transformBehavior:null,type:null,typeOf:X5,to:null,transform:null,transformOrigin:null,u1:null,u2:null,underlinePosition:q5,underlineThickness:q5,unicode:null,unicodeBidi:null,unicodeRange:null,unitsPerEm:q5,values:null,vAlphabetic:q5,vMathematical:q5,vectorEffect:null,vHanging:q5,vIdeographic:q5,version:null,vertAdvY:q5,vertOriginX:q5,vertOriginY:q5,viewBox:null,viewTarget:null,visibility:null,width:null,widths:null,wordSpacing:null,writingMode:null,x:null,x1:null,x2:null,xChannelSelector:null,xHeight:q5,y:null,y1:null,y2:null,yChannelSelector:null,z:null,zoomAndPan:null},space:`svg`,transform:QKe}),nqe=e7({properties:{xLinkActuate:null,xLinkArcRole:null,xLinkHref:null,xLinkRole:null,xLinkShow:null,xLinkTitle:null,xLinkType:null},space:`xlink`,transform(e,t){return`xlink:`+t.slice(5).toLowerCase()}}),rqe=e7({attributes:{xmlnsxlink:`xmlns:xlink`},properties:{xmlnsXLink:null,xmlns:null},space:`xmlns`,transform:$Ke}),iqe=e7({properties:{xmlBase:null,xmlLang:null,xmlSpace:null},space:`xml`,transform(e,t){return`xml:`+t.slice(3).toLowerCase()}}),aqe={classId:`classID`,dataType:`datatype`,itemId:`itemID`,strokeDashArray:`strokeDasharray`,strokeDashOffset:`strokeDashoffset`,strokeLineCap:`strokeLinecap`,strokeLineJoin:`strokeLinejoin`,strokeMiterLimit:`strokeMiterlimit`,typeOf:`typeof`,xLinkActuate:`xlinkActuate`,xLinkArcRole:`xlinkArcrole`,xLinkHref:`xlinkHref`,xLinkRole:`xlinkRole`,xLinkShow:`xlinkShow`,xLinkTitle:`xlinkTitle`,xLinkType:`xlinkType`,xmlnsXLink:`xmlnsXlink`},oqe=/[A-Z]/g,sqe=/-[a-z]/g,cqe=/^data[-\w.:]+$/i;function lqe(e,t){let n=V5(t),r=t,i=H5;if(n in e.normal)return e.property[e.normal[n]];if(n.length>4&&n.slice(0,4)===`data`&&cqe.test(t)){if(t.charAt(4)===`-`){let e=t.slice(5).replace(sqe,dqe);r=`data`+e.charAt(0).toUpperCase()+e.slice(1)}else{let e=t.slice(4);if(!sqe.test(e)){let n=e.replace(oqe,uqe);n.charAt(0)!==`-`&&(n=`-`+n),t=`data`+n}}i=$5}return new i(r,t)}function uqe(e){return`-`+e.toLowerCase()}function dqe(e){return e.charAt(1).toUpperCase()}var fqe=JKe([ZKe,eqe,nqe,rqe,iqe],`html`),t7=JKe([ZKe,tqe,nqe,rqe,iqe],`svg`);function pqe(e){return e.join(` `).trim()}var mqe=o(((e,t)=>{var n=/\/\*[^*]*\*+([^/*][^*]*\*+)*\//g,r=/\n/g,i=/^\s*/,a=/^(\*?[-#/*\\\w]+(\[[0-9a-z_-]+\])?)\s*/,o=/^:\s*/,s=/^((?:'(?:\\'|.)*?'|"(?:\\"|.)*?"|\([^)]*?\)|[^};])+)/,c=/^[;\s]*/,l=/^\s+|\s+$/g,u=`
-`,d=`/`,f=`*`,p=``,m=`comment`,h=`declaration`;function g(e,t){if(typeof e!=`string`)throw TypeError(`First argument must be a string`);if(!e)return[];t||={};var l=1,g=1;function v(e){var t=e.match(r);t&&(l+=t.length);var n=e.lastIndexOf(u);g=~n?e.length-n:g+e.length}function y(){var e={line:l,column:g};return function(t){return t.position=new b(e),C(),t}}function b(e){this.start=e,this.end={line:l,column:g},this.source=t.source}b.prototype.content=e;function x(n){var r=Error(t.source+`:`+l+`:`+g+`: `+n);if(r.reason=n,r.filename=t.source,r.line=l,r.column=g,r.source=e,!t.silent)throw r}function S(t){var n=t.exec(e);if(n){var r=n[0];return v(r),e=e.slice(r.length),n}}function C(){S(i)}function w(e){var t;for(e||=[];t=T();)t!==!1&&e.push(t);return e}function T(){var t=y();if(!(d!=e.charAt(0)||f!=e.charAt(1))){for(var n=2;p!=e.charAt(n)&&(f!=e.charAt(n)||d!=e.charAt(n+1));)++n;if(n+=2,p===e.charAt(n-1))return x(`End of comment missing`);var r=e.slice(2,n-2);return g+=2,v(r),e=e.slice(n),g+=2,t({type:m,comment:r})}}function E(){var e=y(),t=S(a);if(t){if(T(),!S(o))return x(`property missing ':'`);var r=S(s),i=e({type:h,property:_(t[0].replace(n,p)),value:r?_(r[0].replace(n,p)):p});return S(c),i}}function D(){var e=[];w(e);for(var t;t=E();)t!==!1&&(e.push(t),w(e));return e}return C(),D()}function _(e){return e?e.replace(l,p):p}t.exports=g})),hqe=o((e=>{var t=e&&e.__importDefault||function(e){return e&&e.__esModule?e:{default:e}};Object.defineProperty(e,"__esModule",{value:!0}),e.default=r;var n=t(mqe());function r(e,t){let r=null;if(!e||typeof e!=`string`)return r;let i=(0,n.default)(e),a=typeof t==`function`;return i.forEach(e=>{if(e.type!==`declaration`)return;let{property:n,value:i}=e;a?t(n,i,e):i&&(r||={},r[n]=i)}),r}})),gqe=o((e=>{Object.defineProperty(e,"__esModule",{value:!0}),e.camelCase=void 0;var t=/^--[a-zA-Z0-9_-]+$/,n=/-([a-z])/g,r=/^[^-]+$/,i=/^-(webkit|moz|ms|o|khtml)-/,a=/^-(ms)-/,o=function(e){return!e||r.test(e)||t.test(e)},s=function(e,t){return t.toUpperCase()},c=function(e,t){return`${t}-`};e.camelCase=function(e,t){return t===void 0&&(t={}),o(e)?e:(e=e.toLowerCase(),e=t.reactCompat?e.replace(a,c):e.replace(i,c),e.replace(n,s))}})),_qe=o(((e,t)=>{var n=(e&&e.__importDefault||function(e){return e&&e.__esModule?e:{default:e}})(hqe()),r=gqe();function i(e,t){var i={};return!e||typeof e!=`string`||(0,n.default)(e,function(e,n){e&&n&&(i[(0,r.camelCase)(e,t)]=n)}),i}i.default=i,t.exports=i})),vqe=yqe(`end`),n7=yqe(`start`);function yqe(e){return t;function t(t){let n=t&&t.position&&t.position[e]||{};if(typeof n.line==`number`&&n.line>0&&typeof n.column==`number`&&n.column>0)return{line:n.line,column:n.column,offset:typeof n.offset==`number`&&n.offset>-1?n.offset:void 0}}}function bqe(e){let t=n7(e),n=vqe(e);if(t&&n)return{start:t,end:n}}function r7(e){return!e||typeof e!=`object`?``:`position`in e||`type`in e?xqe(e.position):`start`in e||`end`in e?xqe(e):`line`in e||`column`in e?i7(e):``}function i7(e){return Sqe(e&&e.line)+`:`+Sqe(e&&e.column)}function xqe(e){return i7(e&&e.start)+`-`+i7(e&&e.end)}function Sqe(e){return e&&typeof e==`number`?e:1}var a7=class extends Error{constructor(e,t,n){super(),typeof t==`string`&&(n=t,t=void 0);let r=``,i={},a=!1;if(t&&(i=`line`in t&&`column`in t||`start`in t&&`end`in t?{place:t}:`type`in t?{ancestors:[t],place:t.position}:{...t}),typeof e==`string`?r=e:!i.cause&&e&&(a=!0,r=e.message,i.cause=e),!i.ruleId&&!i.source&&typeof n==`string`){let e=n.indexOf(`:`);e===-1?i.ruleId=n:(i.source=n.slice(0,e),i.ruleId=n.slice(e+1))}if(!i.place&&i.ancestors&&i.ancestors){let e=i.ancestors[i.ancestors.length-1];e&&(i.place=e.position)}let o=i.place&&`start`in i.place?i.place.start:i.place;this.ancestors=i.ancestors||void 0,this.cause=i.cause||void 0,this.column=o?o.column:void 0,this.fatal=void 0,this.file=``,this.message=r,this.line=o?o.line:void 0,this.name=r7(i.place)||`1:1`,this.place=i.place||void 0,this.reason=this.message,this.ruleId=i.ruleId||void 0,this.source=i.source||void 0,this.stack=a&&i.cause&&typeof i.cause.stack==`string`?i.cause.stack:``,this.actual=void 0,this.expected=void 0,this.note=void 0,this.url=void 0}};a7.prototype.file=``,a7.prototype.name=``,a7.prototype.reason=``,a7.prototype.message=``,a7.prototype.stack=``,a7.prototype.column=void 0,a7.prototype.line=void 0,a7.prototype.ancestors=void 0,a7.prototype.cause=void 0,a7.prototype.fatal=void 0,a7.prototype.place=void 0,a7.prototype.ruleId=void 0,a7.prototype.source=void 0;var Cqe=l(_qe(),1),o7={}.hasOwnProperty,wqe=new Map,Tqe=/[A-Z]/g,Eqe=new Set([`table`,`tbody`,`thead`,`tfoot`,`tr`]),Dqe=new Set([`td`,`th`]);function Oqe(e,t){if(!t||t.Fragment===void 0)throw TypeError("Expected `Fragment` in options");let n=t.filePath||void 0,r;if(t.development){if(typeof t.jsxDEV!=`function`)throw TypeError("Expected `jsxDEV` in options when `development: true`");r=Rqe(n,t.jsxDEV)}else{if(typeof t.jsx!=`function`)throw TypeError("Expected `jsx` in production options");if(typeof t.jsxs!=`function`)throw TypeError("Expected `jsxs` in production options");r=Lqe(n,t.jsx,t.jsxs)}let i={Fragment:t.Fragment,ancestors:[],components:t.components||{},create:r,elementAttributeNameCase:t.elementAttributeNameCase||`react`,evaluater:t.createEvaluater?t.createEvaluater():void 0,filePath:n,ignoreInvalidStyle:t.ignoreInvalidStyle||!1,passKeys:t.passKeys!==!1,passNode:t.passNode||!1,schema:t.space===`svg`?t7:fqe,stylePropertyNameCase:t.stylePropertyNameCase||`dom`,tableCellAlignToStyle:t.tableCellAlignToStyle!==!1},a=kqe(i,e,void 0);return a&&typeof a!=`string`?a:i.create(e,i.Fragment,{children:a||void 0},void 0)}function kqe(e,t,n){if(t.type===`element`)return Aqe(e,t,n);if(t.type===`mdxFlowExpression`||t.type===`mdxTextExpression`)return jqe(e,t);if(t.type===`mdxJsxFlowElement`||t.type===`mdxJsxTextElement`)return Nqe(e,t,n);if(t.type===`mdxjsEsm`)return Mqe(e,t);if(t.type===`root`)return Pqe(e,t,n);if(t.type===`text`)return Fqe(e,t)}function Aqe(e,t,n){let r=e.schema,i=r;t.tagName.toLowerCase()===`svg`&&r.space===`html`&&(i=t7,e.schema=i),e.ancestors.push(t);let a=Uqe(e,t.tagName,!1),o=zqe(e,t),s=c7(e,t);return Eqe.has(t.tagName)&&(s=s.filter(function(e){return typeof e==`string`?!KKe(e):!0})),Iqe(e,o,a,t),s7(o,s),e.ancestors.pop(),e.schema=r,e.create(t,a,o,n)}function jqe(e,t){if(t.data&&t.data.estree&&e.evaluater){let n=t.data.estree.body[0];return n.type,e.evaluater.evaluateExpression(n.expression)}l7(e,t.position)}function Mqe(e,t){if(t.data&&t.data.estree&&e.evaluater)return e.evaluater.evaluateProgram(t.data.estree);l7(e,t.position)}function Nqe(e,t,n){let r=e.schema,i=r;t.name===`svg`&&r.space===`html`&&(i=t7,e.schema=i),e.ancestors.push(t);let a=t.name===null?e.Fragment:Uqe(e,t.name,!0),o=Bqe(e,t),s=c7(e,t);return Iqe(e,o,a,t),s7(o,s),e.ancestors.pop(),e.schema=r,e.create(t,a,o,n)}function Pqe(e,t,n){let r={};return s7(r,c7(e,t)),e.create(t,e.Fragment,r,n)}function Fqe(e,t){return t.value}function Iqe(e,t,n,r){typeof n!=`string`&&n!==e.Fragment&&e.passNode&&(t.node=r)}function s7(e,t){if(t.length>0){let n=t.length>1?t:t[0];n&&(e.children=n)}}function Lqe(e,t,n){return r;function r(e,r,i,a){let o=Array.isArray(i.children)?n:t;return a?o(r,i,a):o(r,i)}}function Rqe(e,t){return n;function n(n,r,i,a){let o=Array.isArray(i.children),s=n7(n);return t(r,i,a,o,{columnNumber:s?s.column-1:void 0,fileName:e,lineNumber:s?s.line:void 0},void 0)}}function zqe(e,t){let n={},r,i;for(i in t.properties)if(i!==`children`&&o7.call(t.properties,i)){let a=Vqe(e,i,t.properties[i]);if(a){let[i,o]=a;e.tableCellAlignToStyle&&i===`align`&&typeof o==`string`&&Dqe.has(t.tagName)?r=o:n[i]=o}}if(r){let t=n.style||={};t[e.stylePropertyNameCase===`css`?`text-align`:`textAlign`]=r}return n}function Bqe(e,t){let n={};for(let r of t.attributes)if(r.type===`mdxJsxExpressionAttribute`)if(r.data&&r.data.estree&&e.evaluater){let t=r.data.estree.body[0];t.type;let i=t.expression;i.type;let a=i.properties[0];a.type,Object.assign(n,e.evaluater.evaluateExpression(a.argument))}else l7(e,t.position);else{let i=r.name,a;if(r.value&&typeof r.value==`object`)if(r.value.data&&r.value.data.estree&&e.evaluater){let t=r.value.data.estree.body[0];t.type,a=e.evaluater.evaluateExpression(t.expression)}else l7(e,t.position);else a=r.value===null?!0:r.value;n[i]=a}return n}function c7(e,t){let n=[],r=-1,i=e.passKeys?new Map:wqe;for(;++r<t.children.length;){let a=t.children[r],o;if(e.passKeys){let e=a.type===`element`?a.tagName:a.type===`mdxJsxFlowElement`||a.type===`mdxJsxTextElement`?a.name:void 0;if(e){let t=i.get(e)||0;o=e+`-`+t,i.set(e,t+1)}}let s=kqe(e,a,o);s!==void 0&&n.push(s)}return n}function Vqe(e,t,n){let r=lqe(e.schema,t);if(!(n==null||typeof n==`number`&&Number.isNaN(n))){if(Array.isArray(n)&&(n=r.commaSeparated?BKe(n):pqe(n)),r.property===`style`){let t=typeof n==`object`?n:Hqe(e,String(n));return e.stylePropertyNameCase===`css`&&(t=Wqe(t)),[`style`,t]}return[e.elementAttributeNameCase===`react`&&r.space?aqe[r.property]||r.property:r.attribute,n]}}function Hqe(e,t){try{return(0,Cqe.default)(t,{reactCompat:!0})}catch(t){if(e.ignoreInvalidStyle)return{};let n=t,r=new a7("Cannot parse `style` attribute",{ancestors:e.ancestors,cause:n,ruleId:`style`,source:`hast-util-to-jsx-runtime`});throw r.file=e.filePath||void 0,r.url=`https://github.com/syntax-tree/hast-util-to-jsx-runtime#cannot-parse-style-attribute`,r}}function Uqe(e,t,n){let r;if(!n)r={type:`Literal`,value:t};else if(t.includes(`.`)){let e=t.split(`.`),n=-1,i;for(;++n<e.length;){let t=WKe(e[n])?{type:`Identifier`,name:e[n]}:{type:`Literal`,value:e[n]};i=i?{type:`MemberExpression`,object:i,property:t,computed:!!(n&&t.type===`Literal`),optional:!1}:t}r=i}else r=WKe(t)&&!/^[a-z]/.test(t)?{type:`Identifier`,name:t}:{type:`Literal`,value:t};if(r.type===`Literal`){let t=r.value;return o7.call(e.components,t)?e.components[t]:t}if(e.evaluater)return e.evaluater.evaluateExpression(r);l7(e)}function l7(e,t){let n=new a7("Cannot handle MDX estrees without `createEvaluater`",{ancestors:e.ancestors,place:t,ruleId:`mdx-estree`,source:`hast-util-to-jsx-runtime`});throw n.file=e.filePath||void 0,n.url=`https://github.com/syntax-tree/hast-util-to-jsx-runtime#cannot-handle-mdx-estrees-without-createevaluater`,n}function Wqe(e){let t={},n;for(n in e)o7.call(e,n)&&(t[Gqe(n)]=e[n]);return t}function Gqe(e){let t=e.replace(Tqe,Kqe);return t.slice(0,3)===`ms-`&&(t=`-`+t),t}function Kqe(e){return`-`+e.toLowerCase()}var u7={action:[`form`],cite:[`blockquote`,`del`,`ins`,`q`],data:[`object`],formAction:[`button`,`input`],href:[`a`,`area`,`base`,`link`],icon:[`menuitem`],itemId:null,manifest:[`html`],ping:[`a`,`area`],poster:[`video`],src:[`audio`,`embed`,`iframe`,`img`,`input`,`script`,`source`,`track`,`video`]},qqe={};function Jqe(e,t){let n=t||qqe;return Yqe(e,typeof n.includeImageAlt==`boolean`?n.includeImageAlt:!0,typeof n.includeHtml==`boolean`?n.includeHtml:!0)}function Yqe(e,t,n){if(Zqe(e)){if(`value`in e)return e.type===`html`&&!n?``:e.value;if(t&&`alt`in e&&e.alt)return e.alt;if(`children`in e)return Xqe(e.children,t,n)}return Array.isArray(e)?Xqe(e,t,n):``}function Xqe(e,t,n){let r=[],i=-1;for(;++i<e.length;)r[i]=Yqe(e[i],t,n);return r.join(``)}function Zqe(e){return!!(e&&typeof e==`object`)}var Qqe=document.createElement(`i`);function d7(e){let t=`&`+e+`;`;Qqe.innerHTML=t;let n=Qqe.textContent;return n.charCodeAt(n.length-1)===59&&e!==`semi`||n===t?!1:n}function f7(e,t,n,r){let i=e.length,a=0,o;if(t=t<0?-t>i?0:i+t:t>i?i:t,n=n>0?n:0,r.length<1e4)o=Array.from(r),o.unshift(t,n),e.splice(...o);else for(n&&e.splice(t,n);a<r.length;)o=r.slice(a,a+1e4),o.unshift(t,0),e.splice(...o),a+=1e4,t+=1e4}function p7(e,t){return e.length>0?(f7(e,e.length,0,t),e):t}var $qe={}.hasOwnProperty;function eJe(e){let t={},n=-1;for(;++n<e.length;)tJe(t,e[n]);return t}function tJe(e,t){let n;for(n in t){let r=($qe.call(e,n)?e[n]:void 0)||(e[n]={}),i=t[n],a;if(i)for(a in i){$qe.call(r,a)||(r[a]=[]);let e=i[a];nJe(r[a],Array.isArray(e)?e:e?[e]:[])}}}function nJe(e,t){let n=-1,r=[];for(;++n<t.length;)(t[n].add===`after`?e:r).push(t[n]);f7(e,0,0,r)}function rJe(e,t){let n=Number.parseInt(e,t);return n<9||n===11||n>13&&n<32||n>126&&n<160||n>55295&&n<57344||n>64975&&n<65008||(n&65535)==65535||(n&65535)==65534||n>1114111?`�`:String.fromCodePoint(n)}function m7(e){return e.replace(/[\t\n\r ]+/g,` `).replace(/^ | $/g,``).toLowerCase().toUpperCase()}var h7=S7(/[A-Za-z]/),g7=S7(/[\dA-Za-z]/),iJe=S7(/[#-'*+\--9=?A-Z^-~]/);function _7(e){return e!==null&&(e<32||e===127)}var v7=S7(/\d/),aJe=S7(/[\dA-Fa-f]/),oJe=S7(/[!-/:-@[-`{-~]/);function y7(e){return e!==null&&e<-2}function b7(e){return e!==null&&(e<0||e===32)}function x7(e){return e===-2||e===-1||e===32}var sJe=S7(/\p{P}|\p{S}/u),cJe=S7(/\s/);function S7(e){return t;function t(t){return t!==null&&t>-1&&e.test(String.fromCharCode(t))}}function C7(e){let t=[],n=-1,r=0,i=0;for(;++n<e.length;){let a=e.charCodeAt(n),o=``;if(a===37&&g7(e.charCodeAt(n+1))&&g7(e.charCodeAt(n+2)))i=2;else if(a<128)/[!#$&-;=?-Z_a-z~]/.test(String.fromCharCode(a))||(o=String.fromCharCode(a));else if(a>55295&&a<57344){let t=e.charCodeAt(n+1);a<56320&&t>56319&&t<57344?(o=String.fromCharCode(a,t),i=1):o=`�`}else o=String.fromCharCode(a);o&&=(t.push(e.slice(r,n),encodeURIComponent(o)),r=n+i+1,``),i&&=(n+=i,0)}return t.join(``)+e.slice(r)}function w7(e,t,n,r){let i=r?r-1:1/0,a=0;return o;function o(r){return x7(r)?(e.enter(n),s(r)):t(r)}function s(r){return x7(r)&&a++<i?(e.consume(r),s):(e.exit(n),t(r))}}var lJe={tokenize:uJe};function uJe(e){let t=e.attempt(this.parser.constructs.contentInitial,r,i),n;return t;function r(n){if(n===null){e.consume(n);return}return e.enter(`lineEnding`),e.consume(n),e.exit(`lineEnding`),w7(e,t,`linePrefix`)}function i(t){return e.enter(`paragraph`),a(t)}function a(t){let r=e.enter(`chunkText`,{contentType:`text`,previous:n});return n&&(n.next=r),n=r,o(t)}function o(t){if(t===null){e.exit(`chunkText`),e.exit(`paragraph`),e.consume(t);return}return y7(t)?(e.consume(t),e.exit(`chunkText`),a):(e.consume(t),o)}}var dJe={tokenize:pJe},fJe={tokenize:mJe};function pJe(e){let t=this,n=[],r=0,i,a,o;return s;function s(i){if(r<n.length){let a=n[r];return t.containerState=a[1],e.attempt(a[0].continuation,c,l)(i)}return l(i)}function c(e){if(r++,t.containerState._closeFlow){t.containerState._closeFlow=void 0,i&&v();let n=t.events.length,a=n,o;for(;a--;)if(t.events[a][0]===`exit`&&t.events[a][1].type===`chunkFlow`){o=t.events[a][1].end;break}_(r);let s=n;for(;s<t.events.length;)t.events[s][1].end={...o},s++;return f7(t.events,a+1,0,t.events.slice(n)),t.events.length=s,l(e)}return s(e)}function l(a){if(r===n.length){if(!i)return f(a);if(i.currentConstruct&&i.currentConstruct.concrete)return m(a);t.interrupt=!!(i.currentConstruct&&!i._gfmTableDynamicInterruptHack)}return t.containerState={},e.check(fJe,u,d)(a)}function u(e){return i&&v(),_(r),f(e)}function d(e){return t.parser.lazy[t.now().line]=r!==n.length,o=t.now().offset,m(e)}function f(n){return t.containerState={},e.attempt(fJe,p,m)(n)}function p(e){return r++,n.push([t.currentConstruct,t.containerState]),f(e)}function m(n){if(n===null){i&&v(),_(0),e.consume(n);return}return i||=t.parser.flow(t.now()),e.enter(`chunkFlow`,{_tokenizer:i,contentType:`flow`,previous:a}),h(n)}function h(n){if(n===null){g(e.exit(`chunkFlow`),!0),_(0),e.consume(n);return}return y7(n)?(e.consume(n),g(e.exit(`chunkFlow`)),r=0,t.interrupt=void 0,s):(e.consume(n),h)}function g(e,n){let s=t.sliceStream(e);if(n&&s.push(null),e.previous=a,a&&(a.next=e),a=e,i.defineSkip(e.start),i.write(s),t.parser.lazy[e.start.line]){let e=i.events.length;for(;e--;)if(i.events[e][1].start.offset<o&&(!i.events[e][1].end||i.events[e][1].end.offset>o))return;let n=t.events.length,a=n,s,c;for(;a--;)if(t.events[a][0]===`exit`&&t.events[a][1].type===`chunkFlow`){if(s){c=t.events[a][1].end;break}s=!0}for(_(r),e=n;e<t.events.length;)t.events[e][1].end={...c},e++;f7(t.events,a+1,0,t.events.slice(n)),t.events.length=e}}function _(r){let i=n.length;for(;i-- >r;){let r=n[i];t.containerState=r[1],r[0].exit.call(t,e)}n.length=r}function v(){i.write([null]),a=void 0,i=void 0,t.containerState._closeFlow=void 0}}function mJe(e,t,n){return w7(e,e.attempt(this.parser.constructs.document,t,n),`linePrefix`,this.parser.constructs.disable.null.includes(`codeIndented`)?void 0:4)}function T7(e){if(e===null||b7(e)||cJe(e))return 1;if(sJe(e))return 2}function E7(e,t,n){let r=[],i=-1;for(;++i<e.length;){let a=e[i].resolveAll;a&&!r.includes(a)&&(t=a(t,n),r.push(a))}return t}var D7={name:`attention`,resolveAll:hJe,tokenize:gJe};function hJe(e,t){let n=-1,r,i,a,o,s,c,l,u;for(;++n<e.length;)if(e[n][0]===`enter`&&e[n][1].type===`attentionSequence`&&e[n][1]._close){for(r=n;r--;)if(e[r][0]===`exit`&&e[r][1].type===`attentionSequence`&&e[r][1]._open&&t.sliceSerialize(e[r][1]).charCodeAt(0)===t.sliceSerialize(e[n][1]).charCodeAt(0)){if((e[r][1]._close||e[n][1]._open)&&(e[n][1].end.offset-e[n][1].start.offset)%3&&!((e[r][1].end.offset-e[r][1].start.offset+e[n][1].end.offset-e[n][1].start.offset)%3))continue;c=e[r][1].end.offset-e[r][1].start.offset>1&&e[n][1].end.offset-e[n][1].start.offset>1?2:1;let d={...e[r][1].end},f={...e[n][1].start};_Je(d,-c),_Je(f,c),o={type:c>1?`strongSequence`:`emphasisSequence`,start:d,end:{...e[r][1].end}},s={type:c>1?`strongSequence`:`emphasisSequence`,start:{...e[n][1].start},end:f},a={type:c>1?`strongText`:`emphasisText`,start:{...e[r][1].end},end:{...e[n][1].start}},i={type:c>1?`strong`:`emphasis`,start:{...o.start},end:{...s.end}},e[r][1].end={...o.start},e[n][1].start={...s.end},l=[],e[r][1].end.offset-e[r][1].start.offset&&(l=p7(l,[[`enter`,e[r][1],t],[`exit`,e[r][1],t]])),l=p7(l,[[`enter`,i,t],[`enter`,o,t],[`exit`,o,t],[`enter`,a,t]]),l=p7(l,E7(t.parser.constructs.insideSpan.null,e.slice(r+1,n),t)),l=p7(l,[[`exit`,a,t],[`enter`,s,t],[`exit`,s,t],[`exit`,i,t]]),e[n][1].end.offset-e[n][1].start.offset?(u=2,l=p7(l,[[`enter`,e[n][1],t],[`exit`,e[n][1],t]])):u=0,f7(e,r-1,n-r+3,l),n=r+l.length-u-2;break}}for(n=-1;++n<e.length;)e[n][1].type===`attentionSequence`&&(e[n][1].type=`data`);return e}function gJe(e,t){let n=this.parser.constructs.attentionMarkers.null,r=this.previous,i=T7(r),a;return o;function o(t){return a=t,e.enter(`attentionSequence`),s(t)}function s(o){if(o===a)return e.consume(o),s;let c=e.exit(`attentionSequence`),l=T7(o),u=!l||l===2&&i||n.includes(o),d=!i||i===2&&l||n.includes(r);return c._open=!!(a===42?u:u&&(i||!d)),c._close=!!(a===42?d:d&&(l||!u)),t(o)}}function _Je(e,t){e.column+=t,e.offset+=t,e._bufferIndex+=t}var vJe={name:`autolink`,tokenize:yJe};function yJe(e,t,n){let r=0;return i;function i(t){return e.enter(`autolink`),e.enter(`autolinkMarker`),e.consume(t),e.exit(`autolinkMarker`),e.enter(`autolinkProtocol`),a}function a(t){return h7(t)?(e.consume(t),o):t===64?n(t):l(t)}function o(e){return e===43||e===45||e===46||g7(e)?(r=1,s(e)):l(e)}function s(t){return t===58?(e.consume(t),r=0,c):(t===43||t===45||t===46||g7(t))&&r++<32?(e.consume(t),s):(r=0,l(t))}function c(r){return r===62?(e.exit(`autolinkProtocol`),e.enter(`autolinkMarker`),e.consume(r),e.exit(`autolinkMarker`),e.exit(`autolink`),t):r===null||r===32||r===60||_7(r)?n(r):(e.consume(r),c)}function l(t){return t===64?(e.consume(t),u):iJe(t)?(e.consume(t),l):n(t)}function u(e){return g7(e)?d(e):n(e)}function d(n){return n===46?(e.consume(n),r=0,u):n===62?(e.exit(`autolinkProtocol`).type=`autolinkEmail`,e.enter(`autolinkMarker`),e.consume(n),e.exit(`autolinkMarker`),e.exit(`autolink`),t):f(n)}function f(t){if((t===45||g7(t))&&r++<63){let n=t===45?f:d;return e.consume(t),n}return n(t)}}var O7={partial:!0,tokenize:bJe};function bJe(e,t,n){return r;function r(t){return x7(t)?w7(e,i,`linePrefix`)(t):i(t)}function i(e){return e===null||y7(e)?t(e):n(e)}}var xJe={continuation:{tokenize:CJe},exit:wJe,name:`blockQuote`,tokenize:SJe};function SJe(e,t,n){let r=this;return i;function i(t){if(t===62){let n=r.containerState;return n.open||=(e.enter(`blockQuote`,{_container:!0}),!0),e.enter(`blockQuotePrefix`),e.enter(`blockQuoteMarker`),e.consume(t),e.exit(`blockQuoteMarker`),a}return n(t)}function a(n){return x7(n)?(e.enter(`blockQuotePrefixWhitespace`),e.consume(n),e.exit(`blockQuotePrefixWhitespace`),e.exit(`blockQuotePrefix`),t):(e.exit(`blockQuotePrefix`),t(n))}}function CJe(e,t,n){let r=this;return i;function i(t){return x7(t)?w7(e,a,`linePrefix`,r.parser.constructs.disable.null.includes(`codeIndented`)?void 0:4)(t):a(t)}function a(r){return e.attempt(xJe,t,n)(r)}}function wJe(e){e.exit(`blockQuote`)}var TJe={name:`characterEscape`,tokenize:EJe};function EJe(e,t,n){return r;function r(t){return e.enter(`characterEscape`),e.enter(`escapeMarker`),e.consume(t),e.exit(`escapeMarker`),i}function i(r){return oJe(r)?(e.enter(`characterEscapeValue`),e.consume(r),e.exit(`characterEscapeValue`),e.exit(`characterEscape`),t):n(r)}}var DJe={name:`characterReference`,tokenize:OJe};function OJe(e,t,n){let r=this,i=0,a,o;return s;function s(t){return e.enter(`characterReference`),e.enter(`characterReferenceMarker`),e.consume(t),e.exit(`characterReferenceMarker`),c}function c(t){return t===35?(e.enter(`characterReferenceMarkerNumeric`),e.consume(t),e.exit(`characterReferenceMarkerNumeric`),l):(e.enter(`characterReferenceValue`),a=31,o=g7,u(t))}function l(t){return t===88||t===120?(e.enter(`characterReferenceMarkerHexadecimal`),e.consume(t),e.exit(`characterReferenceMarkerHexadecimal`),e.enter(`characterReferenceValue`),a=6,o=aJe,u):(e.enter(`characterReferenceValue`),a=7,o=v7,u(t))}function u(s){if(s===59&&i){let i=e.exit(`characterReferenceValue`);return o===g7&&!d7(r.sliceSerialize(i))?n(s):(e.enter(`characterReferenceMarker`),e.consume(s),e.exit(`characterReferenceMarker`),e.exit(`characterReference`),t)}return o(s)&&i++<a?(e.consume(s),u):n(s)}}var kJe={partial:!0,tokenize:MJe},AJe={concrete:!0,name:`codeFenced`,tokenize:jJe};function jJe(e,t,n){let r=this,i={partial:!0,tokenize:x},a=0,o=0,s;return c;function c(e){return l(e)}function l(t){let n=r.events[r.events.length-1];return a=n&&n[1].type===`linePrefix`?n[2].sliceSerialize(n[1],!0).length:0,s=t,e.enter(`codeFenced`),e.enter(`codeFencedFence`),e.enter(`codeFencedFenceSequence`),u(t)}function u(t){return t===s?(o++,e.consume(t),u):o<3?n(t):(e.exit(`codeFencedFenceSequence`),x7(t)?w7(e,d,`whitespace`)(t):d(t))}function d(n){return n===null||y7(n)?(e.exit(`codeFencedFence`),r.interrupt?t(n):e.check(kJe,h,b)(n)):(e.enter(`codeFencedFenceInfo`),e.enter(`chunkString`,{contentType:`string`}),f(n))}function f(t){return t===null||y7(t)?(e.exit(`chunkString`),e.exit(`codeFencedFenceInfo`),d(t)):x7(t)?(e.exit(`chunkString`),e.exit(`codeFencedFenceInfo`),w7(e,p,`whitespace`)(t)):t===96&&t===s?n(t):(e.consume(t),f)}function p(t){return t===null||y7(t)?d(t):(e.enter(`codeFencedFenceMeta`),e.enter(`chunkString`,{contentType:`string`}),m(t))}function m(t){return t===null||y7(t)?(e.exit(`chunkString`),e.exit(`codeFencedFenceMeta`),d(t)):t===96&&t===s?n(t):(e.consume(t),m)}function h(t){return e.attempt(i,b,g)(t)}function g(t){return e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),_}function _(t){return a>0&&x7(t)?w7(e,v,`linePrefix`,a+1)(t):v(t)}function v(t){return t===null||y7(t)?e.check(kJe,h,b)(t):(e.enter(`codeFlowValue`),y(t))}function y(t){return t===null||y7(t)?(e.exit(`codeFlowValue`),v(t)):(e.consume(t),y)}function b(n){return e.exit(`codeFenced`),t(n)}function x(e,t,n){let i=0;return a;function a(t){return e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),c}function c(t){return e.enter(`codeFencedFence`),x7(t)?w7(e,l,`linePrefix`,r.parser.constructs.disable.null.includes(`codeIndented`)?void 0:4)(t):l(t)}function l(t){return t===s?(e.enter(`codeFencedFenceSequence`),u(t)):n(t)}function u(t){return t===s?(i++,e.consume(t),u):i>=o?(e.exit(`codeFencedFenceSequence`),x7(t)?w7(e,d,`whitespace`)(t):d(t)):n(t)}function d(r){return r===null||y7(r)?(e.exit(`codeFencedFence`),t(r)):n(r)}}}function MJe(e,t,n){let r=this;return i;function i(t){return t===null?n(t):(e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),a)}function a(e){return r.parser.lazy[r.now().line]?n(e):t(e)}}var k7={name:`codeIndented`,tokenize:PJe},NJe={partial:!0,tokenize:FJe};function PJe(e,t,n){let r=this;return i;function i(t){return e.enter(`codeIndented`),w7(e,a,`linePrefix`,5)(t)}function a(e){let t=r.events[r.events.length-1];return t&&t[1].type===`linePrefix`&&t[2].sliceSerialize(t[1],!0).length>=4?o(e):n(e)}function o(t){return t===null?c(t):y7(t)?e.attempt(NJe,o,c)(t):(e.enter(`codeFlowValue`),s(t))}function s(t){return t===null||y7(t)?(e.exit(`codeFlowValue`),o(t)):(e.consume(t),s)}function c(n){return e.exit(`codeIndented`),t(n)}}function FJe(e,t,n){let r=this;return i;function i(t){return r.parser.lazy[r.now().line]?n(t):y7(t)?(e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),i):w7(e,a,`linePrefix`,5)(t)}function a(e){let a=r.events[r.events.length-1];return a&&a[1].type===`linePrefix`&&a[2].sliceSerialize(a[1],!0).length>=4?t(e):y7(e)?i(e):n(e)}}var IJe={name:`codeText`,previous:RJe,resolve:LJe,tokenize:zJe};function LJe(e){let t=e.length-4,n=3,r,i;if((e[n][1].type===`lineEnding`||e[n][1].type===`space`)&&(e[t][1].type===`lineEnding`||e[t][1].type===`space`)){for(r=n;++r<t;)if(e[r][1].type===`codeTextData`){e[n][1].type=`codeTextPadding`,e[t][1].type=`codeTextPadding`,n+=2,t-=2;break}}for(r=n-1,t++;++r<=t;)i===void 0?r!==t&&e[r][1].type!==`lineEnding`&&(i=r):(r===t||e[r][1].type===`lineEnding`)&&(e[i][1].type=`codeTextData`,r!==i+2&&(e[i][1].end=e[r-1][1].end,e.splice(i+2,r-i-2),t-=r-i-2,r=i+2),i=void 0);return e}function RJe(e){return e!==96||this.events[this.events.length-1][1].type===`characterEscape`}function zJe(e,t,n){let r=0,i,a;return o;function o(t){return e.enter(`codeText`),e.enter(`codeTextSequence`),s(t)}function s(t){return t===96?(e.consume(t),r++,s):(e.exit(`codeTextSequence`),c(t))}function c(t){return t===null?n(t):t===32?(e.enter(`space`),e.consume(t),e.exit(`space`),c):t===96?(a=e.enter(`codeTextSequence`),i=0,u(t)):y7(t)?(e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),c):(e.enter(`codeTextData`),l(t))}function l(t){return t===null||t===32||t===96||y7(t)?(e.exit(`codeTextData`),c(t)):(e.consume(t),l)}function u(n){return n===96?(e.consume(n),i++,u):i===r?(e.exit(`codeTextSequence`),e.exit(`codeText`),t(n)):(a.type=`codeTextData`,l(n))}}var BJe=class{constructor(e){this.left=e?[...e]:[],this.right=[]}get(e){if(e<0||e>=this.left.length+this.right.length)throw RangeError("Cannot access index `"+e+"` in a splice buffer of size `"+(this.left.length+this.right.length)+"`");return e<this.left.length?this.left[e]:this.right[this.right.length-e+this.left.length-1]}get length(){return this.left.length+this.right.length}shift(){return this.setCursor(0),this.right.pop()}slice(e,t){let n=t??1/0;return n<this.left.length?this.left.slice(e,n):e>this.left.length?this.right.slice(this.right.length-n+this.left.length,this.right.length-e+this.left.length).reverse():this.left.slice(e).concat(this.right.slice(this.right.length-n+this.left.length).reverse())}splice(e,t,n){let r=t||0;this.setCursor(Math.trunc(e));let i=this.right.splice(this.right.length-r,1/0);return n&&A7(this.left,n),i.reverse()}pop(){return this.setCursor(1/0),this.left.pop()}push(e){this.setCursor(1/0),this.left.push(e)}pushMany(e){this.setCursor(1/0),A7(this.left,e)}unshift(e){this.setCursor(0),this.right.push(e)}unshiftMany(e){this.setCursor(0),A7(this.right,e.reverse())}setCursor(e){if(!(e===this.left.length||e>this.left.length&&this.right.length===0||e<0&&this.left.length===0))if(e<this.left.length){let t=this.left.splice(e,1/0);A7(this.right,t.reverse())}else{let t=this.right.splice(this.left.length+this.right.length-e,1/0);A7(this.left,t.reverse())}}};function A7(e,t){let n=0;if(t.length<1e4)e.push(...t);else for(;n<t.length;)e.push(...t.slice(n,n+1e4)),n+=1e4}function VJe(e){let t={},n=-1,r,i,a,o,s,c,l,u=new BJe(e);for(;++n<u.length;){for(;n in t;)n=t[n];if(r=u.get(n),n&&r[1].type===`chunkFlow`&&u.get(n-1)[1].type===`listItemPrefix`&&(c=r[1]._tokenizer.events,a=0,a<c.length&&c[a][1].type===`lineEndingBlank`&&(a+=2),a<c.length&&c[a][1].type===`content`))for(;++a<c.length&&c[a][1].type!==`content`;)c[a][1].type===`chunkText`&&(c[a][1]._isInFirstContentOfListItem=!0,a++);if(r[0]===`enter`)r[1].contentType&&(Object.assign(t,HJe(u,n)),n=t[n],l=!0);else if(r[1]._container){for(a=n,i=void 0;a--;)if(o=u.get(a),o[1].type===`lineEnding`||o[1].type===`lineEndingBlank`)o[0]===`enter`&&(i&&(u.get(i)[1].type=`lineEndingBlank`),o[1].type=`lineEnding`,i=a);else if(!(o[1].type===`linePrefix`||o[1].type===`listItemIndent`))break;i&&(r[1].end={...u.get(i)[1].start},s=u.slice(i,n),s.unshift(r),u.splice(i,n-i+1,s))}}return f7(e,0,1/0,u.slice(0)),!l}function HJe(e,t){let n=e.get(t)[1],r=e.get(t)[2],i=t-1,a=[],o=n._tokenizer;o||(o=r.parser[n.contentType](n.start),n._contentTypeTextTrailing&&(o._contentTypeTextTrailing=!0));let s=o.events,c=[],l={},u,d,f=-1,p=n,m=0,h=0,g=[h];for(;p;){for(;e.get(++i)[1]!==p;);a.push(i),p._tokenizer||(u=r.sliceStream(p),p.next||u.push(null),d&&o.defineSkip(p.start),p._isInFirstContentOfListItem&&(o._gfmTasklistFirstContentOfListItem=!0),o.write(u),p._isInFirstContentOfListItem&&(o._gfmTasklistFirstContentOfListItem=void 0)),d=p,p=p.next}for(p=n;++f<s.length;)s[f][0]===`exit`&&s[f-1][0]===`enter`&&s[f][1].type===s[f-1][1].type&&s[f][1].start.line!==s[f][1].end.line&&(h=f+1,g.push(h),p._tokenizer=void 0,p.previous=void 0,p=p.next);for(o.events=[],p?(p._tokenizer=void 0,p.previous=void 0):g.pop(),f=g.length;f--;){let t=s.slice(g[f],g[f+1]),n=a.pop();c.push([n,n+t.length-1]),e.splice(n,2,t)}for(c.reverse(),f=-1;++f<c.length;)l[m+c[f][0]]=m+c[f][1],m+=c[f][1]-c[f][0]-1;return l}var UJe={resolve:GJe,tokenize:KJe},WJe={partial:!0,tokenize:qJe};function GJe(e){return VJe(e),e}function KJe(e,t){let n;return r;function r(t){return e.enter(`content`),n=e.enter(`chunkContent`,{contentType:`content`}),i(t)}function i(t){return t===null?a(t):y7(t)?e.check(WJe,o,a)(t):(e.consume(t),i)}function a(n){return e.exit(`chunkContent`),e.exit(`content`),t(n)}function o(t){return e.consume(t),e.exit(`chunkContent`),n.next=e.enter(`chunkContent`,{contentType:`content`,previous:n}),n=n.next,i}}function qJe(e,t,n){let r=this;return i;function i(t){return e.exit(`chunkContent`),e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),w7(e,a,`linePrefix`)}function a(i){if(i===null||y7(i))return n(i);let a=r.events[r.events.length-1];return!r.parser.constructs.disable.null.includes(`codeIndented`)&&a&&a[1].type===`linePrefix`&&a[2].sliceSerialize(a[1],!0).length>=4?t(i):e.interrupt(r.parser.constructs.flow,n,t)(i)}}function JJe(e,t,n,r,i,a,o,s,c){let l=c||1/0,u=0;return d;function d(t){return t===60?(e.enter(r),e.enter(i),e.enter(a),e.consume(t),e.exit(a),f):t===null||t===32||t===41||_7(t)?n(t):(e.enter(r),e.enter(o),e.enter(s),e.enter(`chunkString`,{contentType:`string`}),h(t))}function f(n){return n===62?(e.enter(a),e.consume(n),e.exit(a),e.exit(i),e.exit(r),t):(e.enter(s),e.enter(`chunkString`,{contentType:`string`}),p(n))}function p(t){return t===62?(e.exit(`chunkString`),e.exit(s),f(t)):t===null||t===60||y7(t)?n(t):(e.consume(t),t===92?m:p)}function m(t){return t===60||t===62||t===92?(e.consume(t),p):p(t)}function h(i){return!u&&(i===null||i===41||b7(i))?(e.exit(`chunkString`),e.exit(s),e.exit(o),e.exit(r),t(i)):u<l&&i===40?(e.consume(i),u++,h):i===41?(e.consume(i),u--,h):i===null||i===32||i===40||_7(i)?n(i):(e.consume(i),i===92?g:h)}function g(t){return t===40||t===41||t===92?(e.consume(t),h):h(t)}}function YJe(e,t,n,r,i,a){let o=this,s=0,c;return l;function l(t){return e.enter(r),e.enter(i),e.consume(t),e.exit(i),e.enter(a),u}function u(l){return s>999||l===null||l===91||l===93&&!c||l===94&&!s&&`_hiddenFootnoteSupport`in o.parser.constructs?n(l):l===93?(e.exit(a),e.enter(i),e.consume(l),e.exit(i),e.exit(r),t):y7(l)?(e.enter(`lineEnding`),e.consume(l),e.exit(`lineEnding`),u):(e.enter(`chunkString`,{contentType:`string`}),d(l))}function d(t){return t===null||t===91||t===93||y7(t)||s++>999?(e.exit(`chunkString`),u(t)):(e.consume(t),c||=!x7(t),t===92?f:d)}function f(t){return t===91||t===92||t===93?(e.consume(t),s++,d):d(t)}}function XJe(e,t,n,r,i,a){let o;return s;function s(t){return t===34||t===39||t===40?(e.enter(r),e.enter(i),e.consume(t),e.exit(i),o=t===40?41:t,c):n(t)}function c(n){return n===o?(e.enter(i),e.consume(n),e.exit(i),e.exit(r),t):(e.enter(a),l(n))}function l(t){return t===o?(e.exit(a),c(o)):t===null?n(t):y7(t)?(e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),w7(e,l,`linePrefix`)):(e.enter(`chunkString`,{contentType:`string`}),u(t))}function u(t){return t===o||t===null||y7(t)?(e.exit(`chunkString`),l(t)):(e.consume(t),t===92?d:u)}function d(t){return t===o||t===92?(e.consume(t),u):u(t)}}function j7(e,t){let n;return r;function r(i){return y7(i)?(e.enter(`lineEnding`),e.consume(i),e.exit(`lineEnding`),n=!0,r):x7(i)?w7(e,r,n?`linePrefix`:`lineSuffix`)(i):t(i)}}var ZJe={name:`definition`,tokenize:$Je},QJe={partial:!0,tokenize:eYe};function $Je(e,t,n){let r=this,i;return a;function a(t){return e.enter(`definition`),o(t)}function o(t){return YJe.call(r,e,s,n,`definitionLabel`,`definitionLabelMarker`,`definitionLabelString`)(t)}function s(t){return i=m7(r.sliceSerialize(r.events[r.events.length-1][1]).slice(1,-1)),t===58?(e.enter(`definitionMarker`),e.consume(t),e.exit(`definitionMarker`),c):n(t)}function c(t){return b7(t)?j7(e,l)(t):l(t)}function l(t){return JJe(e,u,n,`definitionDestination`,`definitionDestinationLiteral`,`definitionDestinationLiteralMarker`,`definitionDestinationRaw`,`definitionDestinationString`)(t)}function u(t){return e.attempt(QJe,d,d)(t)}function d(t){return x7(t)?w7(e,f,`whitespace`)(t):f(t)}function f(a){return a===null||y7(a)?(e.exit(`definition`),r.parser.defined.push(i),t(a)):n(a)}}function eYe(e,t,n){return r;function r(t){return b7(t)?j7(e,i)(t):n(t)}function i(t){return XJe(e,a,n,`definitionTitle`,`definitionTitleMarker`,`definitionTitleString`)(t)}function a(t){return x7(t)?w7(e,o,`whitespace`)(t):o(t)}function o(e){return e===null||y7(e)?t(e):n(e)}}var tYe={name:`hardBreakEscape`,tokenize:nYe};function nYe(e,t,n){return r;function r(t){return e.enter(`hardBreakEscape`),e.consume(t),i}function i(r){return y7(r)?(e.exit(`hardBreakEscape`),t(r)):n(r)}}var rYe={name:`headingAtx`,resolve:iYe,tokenize:aYe};function iYe(e,t){let n=e.length-2,r=3,i,a;return e[r][1].type===`whitespace`&&(r+=2),n-2>r&&e[n][1].type===`whitespace`&&(n-=2),e[n][1].type===`atxHeadingSequence`&&(r===n-1||n-4>r&&e[n-2][1].type===`whitespace`)&&(n-=r+1===n?2:4),n>r&&(i={type:`atxHeadingText`,start:e[r][1].start,end:e[n][1].end},a={type:`chunkText`,start:e[r][1].start,end:e[n][1].end,contentType:`text`},f7(e,r,n-r+1,[[`enter`,i,t],[`enter`,a,t],[`exit`,a,t],[`exit`,i,t]])),e}function aYe(e,t,n){let r=0;return i;function i(t){return e.enter(`atxHeading`),a(t)}function a(t){return e.enter(`atxHeadingSequence`),o(t)}function o(t){return t===35&&r++<6?(e.consume(t),o):t===null||b7(t)?(e.exit(`atxHeadingSequence`),s(t)):n(t)}function s(n){return n===35?(e.enter(`atxHeadingSequence`),c(n)):n===null||y7(n)?(e.exit(`atxHeading`),t(n)):x7(n)?w7(e,s,`whitespace`)(n):(e.enter(`atxHeadingText`),l(n))}function c(t){return t===35?(e.consume(t),c):(e.exit(`atxHeadingSequence`),s(t))}function l(t){return t===null||t===35||b7(t)?(e.exit(`atxHeadingText`),s(t)):(e.consume(t),l)}}var oYe=`address.article.aside.base.basefont.blockquote.body.caption.center.col.colgroup.dd.details.dialog.dir.div.dl.dt.fieldset.figcaption.figure.footer.form.frame.frameset.h1.h2.h3.h4.h5.h6.head.header.hr.html.iframe.legend.li.link.main.menu.menuitem.nav.noframes.ol.optgroup.option.p.param.search.section.summary.table.tbody.td.tfoot.th.thead.title.tr.track.ul`.split(`.`),sYe=[`pre`,`script`,`style`,`textarea`],cYe={concrete:!0,name:`htmlFlow`,resolveTo:dYe,tokenize:fYe},lYe={partial:!0,tokenize:mYe},uYe={partial:!0,tokenize:pYe};function dYe(e){let t=e.length;for(;t--&&!(e[t][0]===`enter`&&e[t][1].type===`htmlFlow`););return t>1&&e[t-2][1].type===`linePrefix`&&(e[t][1].start=e[t-2][1].start,e[t+1][1].start=e[t-2][1].start,e.splice(t-2,2)),e}function fYe(e,t,n){let r=this,i,a,o,s,c;return l;function l(e){return u(e)}function u(t){return e.enter(`htmlFlow`),e.enter(`htmlFlowData`),e.consume(t),d}function d(s){return s===33?(e.consume(s),f):s===47?(e.consume(s),a=!0,h):s===63?(e.consume(s),i=3,r.interrupt?t:I):h7(s)?(e.consume(s),o=String.fromCharCode(s),g):n(s)}function f(a){return a===45?(e.consume(a),i=2,p):a===91?(e.consume(a),i=5,s=0,m):h7(a)?(e.consume(a),i=4,r.interrupt?t:I):n(a)}function p(i){return i===45?(e.consume(i),r.interrupt?t:I):n(i)}function m(i){return i===`CDATA[`.charCodeAt(s++)?(e.consume(i),s===6?r.interrupt?t:O:m):n(i)}function h(t){return h7(t)?(e.consume(t),o=String.fromCharCode(t),g):n(t)}function g(s){if(s===null||s===47||s===62||b7(s)){let c=s===47,l=o.toLowerCase();return!c&&!a&&sYe.includes(l)?(i=1,r.interrupt?t(s):O(s)):oYe.includes(o.toLowerCase())?(i=6,c?(e.consume(s),_):r.interrupt?t(s):O(s)):(i=7,r.interrupt&&!r.parser.lazy[r.now().line]?n(s):a?v(s):y(s))}return s===45||g7(s)?(e.consume(s),o+=String.fromCharCode(s),g):n(s)}function _(i){return i===62?(e.consume(i),r.interrupt?t:O):n(i)}function v(t){return x7(t)?(e.consume(t),v):E(t)}function y(t){return t===47?(e.consume(t),E):t===58||t===95||h7(t)?(e.consume(t),b):x7(t)?(e.consume(t),y):E(t)}function b(t){return t===45||t===46||t===58||t===95||g7(t)?(e.consume(t),b):x(t)}function x(t){return t===61?(e.consume(t),S):x7(t)?(e.consume(t),x):y(t)}function S(t){return t===null||t===60||t===61||t===62||t===96?n(t):t===34||t===39?(e.consume(t),c=t,C):x7(t)?(e.consume(t),S):w(t)}function C(t){return t===c?(e.consume(t),c=null,T):t===null||y7(t)?n(t):(e.consume(t),C)}function w(t){return t===null||t===34||t===39||t===47||t===60||t===61||t===62||t===96||b7(t)?x(t):(e.consume(t),w)}function T(e){return e===47||e===62||x7(e)?y(e):n(e)}function E(t){return t===62?(e.consume(t),D):n(t)}function D(t){return t===null||y7(t)?O(t):x7(t)?(e.consume(t),D):n(t)}function O(t){return t===45&&i===2?(e.consume(t),M):t===60&&i===1?(e.consume(t),N):t===62&&i===4?(e.consume(t),L):t===63&&i===3?(e.consume(t),I):t===93&&i===5?(e.consume(t),F):y7(t)&&(i===6||i===7)?(e.exit(`htmlFlowData`),e.check(lYe,R,k)(t)):t===null||y7(t)?(e.exit(`htmlFlowData`),k(t)):(e.consume(t),O)}function k(t){return e.check(uYe,A,R)(t)}function A(t){return e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),j}function j(t){return t===null||y7(t)?k(t):(e.enter(`htmlFlowData`),O(t))}function M(t){return t===45?(e.consume(t),I):O(t)}function N(t){return t===47?(e.consume(t),o=``,P):O(t)}function P(t){if(t===62){let n=o.toLowerCase();return sYe.includes(n)?(e.consume(t),L):O(t)}return h7(t)&&o.length<8?(e.consume(t),o+=String.fromCharCode(t),P):O(t)}function F(t){return t===93?(e.consume(t),I):O(t)}function I(t){return t===62?(e.consume(t),L):t===45&&i===2?(e.consume(t),I):O(t)}function L(t){return t===null||y7(t)?(e.exit(`htmlFlowData`),R(t)):(e.consume(t),L)}function R(n){return e.exit(`htmlFlow`),t(n)}}function pYe(e,t,n){let r=this;return i;function i(t){return y7(t)?(e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),a):n(t)}function a(e){return r.parser.lazy[r.now().line]?n(e):t(e)}}function mYe(e,t,n){return r;function r(r){return e.enter(`lineEnding`),e.consume(r),e.exit(`lineEnding`),e.attempt(O7,t,n)}}var hYe={name:`htmlText`,tokenize:gYe};function gYe(e,t,n){let r=this,i,a,o;return s;function s(t){return e.enter(`htmlText`),e.enter(`htmlTextData`),e.consume(t),c}function c(t){return t===33?(e.consume(t),l):t===47?(e.consume(t),x):t===63?(e.consume(t),y):h7(t)?(e.consume(t),w):n(t)}function l(t){return t===45?(e.consume(t),u):t===91?(e.consume(t),a=0,m):h7(t)?(e.consume(t),v):n(t)}function u(t){return t===45?(e.consume(t),p):n(t)}function d(t){return t===null?n(t):t===45?(e.consume(t),f):y7(t)?(o=d,N(t)):(e.consume(t),d)}function f(t){return t===45?(e.consume(t),p):d(t)}function p(e){return e===62?M(e):e===45?f(e):d(e)}function m(t){return t===`CDATA[`.charCodeAt(a++)?(e.consume(t),a===6?h:m):n(t)}function h(t){return t===null?n(t):t===93?(e.consume(t),g):y7(t)?(o=h,N(t)):(e.consume(t),h)}function g(t){return t===93?(e.consume(t),_):h(t)}function _(t){return t===62?M(t):t===93?(e.consume(t),_):h(t)}function v(t){return t===null||t===62?M(t):y7(t)?(o=v,N(t)):(e.consume(t),v)}function y(t){return t===null?n(t):t===63?(e.consume(t),b):y7(t)?(o=y,N(t)):(e.consume(t),y)}function b(e){return e===62?M(e):y(e)}function x(t){return h7(t)?(e.consume(t),S):n(t)}function S(t){return t===45||g7(t)?(e.consume(t),S):C(t)}function C(t){return y7(t)?(o=C,N(t)):x7(t)?(e.consume(t),C):M(t)}function w(t){return t===45||g7(t)?(e.consume(t),w):t===47||t===62||b7(t)?T(t):n(t)}function T(t){return t===47?(e.consume(t),M):t===58||t===95||h7(t)?(e.consume(t),E):y7(t)?(o=T,N(t)):x7(t)?(e.consume(t),T):M(t)}function E(t){return t===45||t===46||t===58||t===95||g7(t)?(e.consume(t),E):D(t)}function D(t){return t===61?(e.consume(t),O):y7(t)?(o=D,N(t)):x7(t)?(e.consume(t),D):T(t)}function O(t){return t===null||t===60||t===61||t===62||t===96?n(t):t===34||t===39?(e.consume(t),i=t,k):y7(t)?(o=O,N(t)):x7(t)?(e.consume(t),O):(e.consume(t),A)}function k(t){return t===i?(e.consume(t),i=void 0,j):t===null?n(t):y7(t)?(o=k,N(t)):(e.consume(t),k)}function A(t){return t===null||t===34||t===39||t===60||t===61||t===96?n(t):t===47||t===62||b7(t)?T(t):(e.consume(t),A)}function j(e){return e===47||e===62||b7(e)?T(e):n(e)}function M(r){return r===62?(e.consume(r),e.exit(`htmlTextData`),e.exit(`htmlText`),t):n(r)}function N(t){return e.exit(`htmlTextData`),e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),P}function P(t){return x7(t)?w7(e,F,`linePrefix`,r.parser.constructs.disable.null.includes(`codeIndented`)?void 0:4)(t):F(t)}function F(t){return e.enter(`htmlTextData`),o(t)}}var M7={name:`labelEnd`,resolveAll:bYe,resolveTo:xYe,tokenize:SYe},_Ye={tokenize:CYe},vYe={tokenize:wYe},yYe={tokenize:TYe};function bYe(e){let t=-1,n=[];for(;++t<e.length;){let r=e[t][1];if(n.push(e[t]),r.type===`labelImage`||r.type===`labelLink`||r.type===`labelEnd`){let e=r.type===`labelImage`?4:2;r.type=`data`,t+=e}}return e.length!==n.length&&f7(e,0,e.length,n),e}function xYe(e,t){let n=e.length,r=0,i,a,o,s;for(;n--;)if(i=e[n][1],a){if(i.type===`link`||i.type===`labelLink`&&i._inactive)break;e[n][0]===`enter`&&i.type===`labelLink`&&(i._inactive=!0)}else if(o){if(e[n][0]===`enter`&&(i.type===`labelImage`||i.type===`labelLink`)&&!i._balanced&&(a=n,i.type!==`labelLink`)){r=2;break}}else i.type===`labelEnd`&&(o=n);let c={type:e[a][1].type===`labelLink`?`link`:`image`,start:{...e[a][1].start},end:{...e[e.length-1][1].end}},l={type:`label`,start:{...e[a][1].start},end:{...e[o][1].end}},u={type:`labelText`,start:{...e[a+r+2][1].end},end:{...e[o-2][1].start}};return s=[[`enter`,c,t],[`enter`,l,t]],s=p7(s,e.slice(a+1,a+r+3)),s=p7(s,[[`enter`,u,t]]),s=p7(s,E7(t.parser.constructs.insideSpan.null,e.slice(a+r+4,o-3),t)),s=p7(s,[[`exit`,u,t],e[o-2],e[o-1],[`exit`,l,t]]),s=p7(s,e.slice(o+1)),s=p7(s,[[`exit`,c,t]]),f7(e,a,e.length,s),e}function SYe(e,t,n){let r=this,i=r.events.length,a,o;for(;i--;)if((r.events[i][1].type===`labelImage`||r.events[i][1].type===`labelLink`)&&!r.events[i][1]._balanced){a=r.events[i][1];break}return s;function s(t){return a?a._inactive?d(t):(o=r.parser.defined.includes(m7(r.sliceSerialize({start:a.end,end:r.now()}))),e.enter(`labelEnd`),e.enter(`labelMarker`),e.consume(t),e.exit(`labelMarker`),e.exit(`labelEnd`),c):n(t)}function c(t){return t===40?e.attempt(_Ye,u,o?u:d)(t):t===91?e.attempt(vYe,u,o?l:d)(t):o?u(t):d(t)}function l(t){return e.attempt(yYe,u,d)(t)}function u(e){return t(e)}function d(e){return a._balanced=!0,n(e)}}function CYe(e,t,n){return r;function r(t){return e.enter(`resource`),e.enter(`resourceMarker`),e.consume(t),e.exit(`resourceMarker`),i}function i(t){return b7(t)?j7(e,a)(t):a(t)}function a(t){return t===41?u(t):JJe(e,o,s,`resourceDestination`,`resourceDestinationLiteral`,`resourceDestinationLiteralMarker`,`resourceDestinationRaw`,`resourceDestinationString`,32)(t)}function o(t){return b7(t)?j7(e,c)(t):u(t)}function s(e){return n(e)}function c(t){return t===34||t===39||t===40?XJe(e,l,n,`resourceTitle`,`resourceTitleMarker`,`resourceTitleString`)(t):u(t)}function l(t){return b7(t)?j7(e,u)(t):u(t)}function u(r){return r===41?(e.enter(`resourceMarker`),e.consume(r),e.exit(`resourceMarker`),e.exit(`resource`),t):n(r)}}function wYe(e,t,n){let r=this;return i;function i(t){return YJe.call(r,e,a,o,`reference`,`referenceMarker`,`referenceString`)(t)}function a(e){return r.parser.defined.includes(m7(r.sliceSerialize(r.events[r.events.length-1][1]).slice(1,-1)))?t(e):n(e)}function o(e){return n(e)}}function TYe(e,t,n){return r;function r(t){return e.enter(`reference`),e.enter(`referenceMarker`),e.consume(t),e.exit(`referenceMarker`),i}function i(r){return r===93?(e.enter(`referenceMarker`),e.consume(r),e.exit(`referenceMarker`),e.exit(`reference`),t):n(r)}}var EYe={name:`labelStartImage`,resolveAll:M7.resolveAll,tokenize:DYe};function DYe(e,t,n){let r=this;return i;function i(t){return e.enter(`labelImage`),e.enter(`labelImageMarker`),e.consume(t),e.exit(`labelImageMarker`),a}function a(t){return t===91?(e.enter(`labelMarker`),e.consume(t),e.exit(`labelMarker`),e.exit(`labelImage`),o):n(t)}function o(e){return e===94&&`_hiddenFootnoteSupport`in r.parser.constructs?n(e):t(e)}}var OYe={name:`labelStartLink`,resolveAll:M7.resolveAll,tokenize:kYe};function kYe(e,t,n){let r=this;return i;function i(t){return e.enter(`labelLink`),e.enter(`labelMarker`),e.consume(t),e.exit(`labelMarker`),e.exit(`labelLink`),a}function a(e){return e===94&&`_hiddenFootnoteSupport`in r.parser.constructs?n(e):t(e)}}var N7={name:`lineEnding`,tokenize:AYe};function AYe(e,t){return n;function n(n){return e.enter(`lineEnding`),e.consume(n),e.exit(`lineEnding`),w7(e,t,`linePrefix`)}}var P7={name:`thematicBreak`,tokenize:jYe};function jYe(e,t,n){let r=0,i;return a;function a(t){return e.enter(`thematicBreak`),o(t)}function o(e){return i=e,s(e)}function s(a){return a===i?(e.enter(`thematicBreakSequence`),c(a)):r>=3&&(a===null||y7(a))?(e.exit(`thematicBreak`),t(a)):n(a)}function c(t){return t===i?(e.consume(t),r++,c):(e.exit(`thematicBreakSequence`),x7(t)?w7(e,s,`whitespace`)(t):s(t))}}var F7={continuation:{tokenize:FYe},exit:LYe,name:`list`,tokenize:PYe},MYe={partial:!0,tokenize:RYe},NYe={partial:!0,tokenize:IYe};function PYe(e,t,n){let r=this,i=r.events[r.events.length-1],a=i&&i[1].type===`linePrefix`?i[2].sliceSerialize(i[1],!0).length:0,o=0;return s;function s(t){let i=r.containerState.type||(t===42||t===43||t===45?`listUnordered`:`listOrdered`);if(i===`listUnordered`?!r.containerState.marker||t===r.containerState.marker:v7(t)){if(r.containerState.type||(r.containerState.type=i,e.enter(i,{_container:!0})),i===`listUnordered`)return e.enter(`listItemPrefix`),t===42||t===45?e.check(P7,n,l)(t):l(t);if(!r.interrupt||t===49)return e.enter(`listItemPrefix`),e.enter(`listItemValue`),c(t)}return n(t)}function c(t){return v7(t)&&++o<10?(e.consume(t),c):(!r.interrupt||o<2)&&(r.containerState.marker?t===r.containerState.marker:t===41||t===46)?(e.exit(`listItemValue`),l(t)):n(t)}function l(t){return e.enter(`listItemMarker`),e.consume(t),e.exit(`listItemMarker`),r.containerState.marker=r.containerState.marker||t,e.check(O7,r.interrupt?n:u,e.attempt(MYe,f,d))}function u(e){return r.containerState.initialBlankLine=!0,a++,f(e)}function d(t){return x7(t)?(e.enter(`listItemPrefixWhitespace`),e.consume(t),e.exit(`listItemPrefixWhitespace`),f):n(t)}function f(n){return r.containerState.size=a+r.sliceSerialize(e.exit(`listItemPrefix`),!0).length,t(n)}}function FYe(e,t,n){let r=this;return r.containerState._closeFlow=void 0,e.check(O7,i,a);function i(n){return r.containerState.furtherBlankLines=r.containerState.furtherBlankLines||r.containerState.initialBlankLine,w7(e,t,`listItemIndent`,r.containerState.size+1)(n)}function a(n){return r.containerState.furtherBlankLines||!x7(n)?(r.containerState.furtherBlankLines=void 0,r.containerState.initialBlankLine=void 0,o(n)):(r.containerState.furtherBlankLines=void 0,r.containerState.initialBlankLine=void 0,e.attempt(NYe,t,o)(n))}function o(i){return r.containerState._closeFlow=!0,r.interrupt=void 0,w7(e,e.attempt(F7,t,n),`linePrefix`,r.parser.constructs.disable.null.includes(`codeIndented`)?void 0:4)(i)}}function IYe(e,t,n){let r=this;return w7(e,i,`listItemIndent`,r.containerState.size+1);function i(e){let i=r.events[r.events.length-1];return i&&i[1].type===`listItemIndent`&&i[2].sliceSerialize(i[1],!0).length===r.containerState.size?t(e):n(e)}}function LYe(e){e.exit(this.containerState.type)}function RYe(e,t,n){let r=this;return w7(e,i,`listItemPrefixWhitespace`,r.parser.constructs.disable.null.includes(`codeIndented`)?void 0:5);function i(e){let i=r.events[r.events.length-1];return!x7(e)&&i&&i[1].type===`listItemPrefixWhitespace`?t(e):n(e)}}var zYe={name:`setextUnderline`,resolveTo:BYe,tokenize:VYe};function BYe(e,t){let n=e.length,r,i,a;for(;n--;)if(e[n][0]===`enter`){if(e[n][1].type===`content`){r=n;break}e[n][1].type===`paragraph`&&(i=n)}else e[n][1].type===`content`&&e.splice(n,1),!a&&e[n][1].type===`definition`&&(a=n);let o={type:`setextHeading`,start:{...e[r][1].start},end:{...e[e.length-1][1].end}};return e[i][1].type=`setextHeadingText`,a?(e.splice(i,0,[`enter`,o,t]),e.splice(a+1,0,[`exit`,e[r][1],t]),e[r][1].end={...e[a][1].end}):e[r][1]=o,e.push([`exit`,o,t]),e}function VYe(e,t,n){let r=this,i;return a;function a(t){let a=r.events.length,s;for(;a--;)if(r.events[a][1].type!==`lineEnding`&&r.events[a][1].type!==`linePrefix`&&r.events[a][1].type!==`content`){s=r.events[a][1].type===`paragraph`;break}return!r.parser.lazy[r.now().line]&&(r.interrupt||s)?(e.enter(`setextHeadingLine`),i=t,o(t)):n(t)}function o(t){return e.enter(`setextHeadingLineSequence`),s(t)}function s(t){return t===i?(e.consume(t),s):(e.exit(`setextHeadingLineSequence`),x7(t)?w7(e,c,`lineSuffix`)(t):c(t))}function c(r){return r===null||y7(r)?(e.exit(`setextHeadingLine`),t(r)):n(r)}}var HYe={tokenize:UYe};function UYe(e){let t=this,n=e.attempt(O7,r,e.attempt(this.parser.constructs.flowInitial,i,w7(e,e.attempt(this.parser.constructs.flow,i,e.attempt(UJe,i)),`linePrefix`)));return n;function r(r){if(r===null){e.consume(r);return}return e.enter(`lineEndingBlank`),e.consume(r),e.exit(`lineEndingBlank`),t.currentConstruct=void 0,n}function i(r){if(r===null){e.consume(r);return}return e.enter(`lineEnding`),e.consume(r),e.exit(`lineEnding`),t.currentConstruct=void 0,n}}var WYe={resolveAll:JYe()},GYe=qYe(`string`),KYe=qYe(`text`);function qYe(e){return{resolveAll:JYe(e===`text`?YYe:void 0),tokenize:t};function t(t){let n=this,r=this.parser.constructs[e],i=t.attempt(r,a,o);return a;function a(e){return c(e)?i(e):o(e)}function o(e){if(e===null){t.consume(e);return}return t.enter(`data`),t.consume(e),s}function s(e){return c(e)?(t.exit(`data`),i(e)):(t.consume(e),s)}function c(e){if(e===null)return!0;let t=r[e],i=-1;if(t)for(;++i<t.length;){let e=t[i];if(!e.previous||e.previous.call(n,n.previous))return!0}return!1}}}function JYe(e){return t;function t(t,n){let r=-1,i;for(;++r<=t.length;)i===void 0?t[r]&&t[r][1].type===`data`&&(i=r,r++):(!t[r]||t[r][1].type!==`data`)&&(r!==i+2&&(t[i][1].end=t[r-1][1].end,t.splice(i+2,r-i-2),r=i+2),i=void 0);return e?e(t,n):t}}function YYe(e,t){let n=0;for(;++n<=e.length;)if((n===e.length||e[n][1].type===`lineEnding`)&&e[n-1][1].type===`data`){let r=e[n-1][1],i=t.sliceStream(r),a=i.length,o=-1,s=0,c;for(;a--;){let e=i[a];if(typeof e==`string`){for(o=e.length;e.charCodeAt(o-1)===32;)s++,o--;if(o)break;o=-1}else if(e===-2)c=!0,s++;else if(e!==-1){a++;break}}if(t._contentTypeTextTrailing&&n===e.length&&(s=0),s){let i={type:n===e.length||c||s<2?`lineSuffix`:`hardBreakTrailing`,start:{_bufferIndex:a?o:r.start._bufferIndex+o,_index:r.start._index+a,line:r.end.line,column:r.end.column-s,offset:r.end.offset-s},end:{...r.end}};r.end={...i.start},r.start.offset===r.end.offset?Object.assign(r,i):(e.splice(n,0,[`enter`,i,t],[`exit`,i,t]),n+=2)}n++}return e}var XYe=s({attentionMarkers:()=>iXe,contentInitial:()=>QYe,disable:()=>aXe,document:()=>ZYe,flow:()=>eXe,flowInitial:()=>$Ye,insideSpan:()=>rXe,string:()=>tXe,text:()=>nXe}),ZYe={42:F7,43:F7,45:F7,48:F7,49:F7,50:F7,51:F7,52:F7,53:F7,54:F7,55:F7,56:F7,57:F7,62:xJe},QYe={91:ZJe},$Ye={[-2]:k7,[-1]:k7,32:k7},eXe={35:rYe,42:P7,45:[zYe,P7],60:cYe,61:zYe,95:P7,96:AJe,126:AJe},tXe={38:DJe,92:TJe},nXe={[-5]:N7,[-4]:N7,[-3]:N7,33:EYe,38:DJe,42:D7,60:[vJe,hYe],91:OYe,92:[tYe,TJe],93:M7,95:D7,96:IJe},rXe={null:[D7,WYe]},iXe={null:[42,95]},aXe={null:[]};function oXe(e,t,n){let r={_bufferIndex:-1,_index:0,line:n&&n.line||1,column:n&&n.column||1,offset:n&&n.offset||0},i={},a=[],o=[],s=[],c={attempt:C(x),check:C(S),consume:v,enter:y,exit:b,interrupt:C(S,{interrupt:!0})},l={code:null,containerState:{},defineSkip:h,events:[],now:m,parser:e,previous:null,sliceSerialize:f,sliceStream:p,write:d},u=t.tokenize.call(l,c);return t.resolveAll&&a.push(t),l;function d(e){return o=p7(o,e),g(),o[o.length-1]===null?(w(t,0),l.events=E7(a,l.events,l),l.events):[]}function f(e,t){return cXe(p(e),t)}function p(e){return sXe(o,e)}function m(){let{_bufferIndex:e,_index:t,line:n,column:i,offset:a}=r;return{_bufferIndex:e,_index:t,line:n,column:i,offset:a}}function h(e){i[e.line]=e.column,E()}function g(){let e;for(;r._index<o.length;){let t=o[r._index];if(typeof t==`string`)for(e=r._index,r._bufferIndex<0&&(r._bufferIndex=0);r._index===e&&r._bufferIndex<t.length;)_(t.charCodeAt(r._bufferIndex));else _(t)}}function _(e){u=u(e)}function v(e){y7(e)?(r.line++,r.column=1,r.offset+=e===-3?2:1,E()):e!==-1&&(r.column++,r.offset++),r._bufferIndex<0?r._index++:(r._bufferIndex++,r._bufferIndex===o[r._index].length&&(r._bufferIndex=-1,r._index++)),l.previous=e}function y(e,t){let n=t||{};return n.type=e,n.start=m(),l.events.push([`enter`,n,l]),s.push(n),n}function b(e){let t=s.pop();return t.end=m(),l.events.push([`exit`,t,l]),t}function x(e,t){w(e,t.from)}function S(e,t){t.restore()}function C(e,t){return n;function n(n,r,i){let a,o,s,u;return Array.isArray(n)?f(n):`tokenize`in n?f([n]):d(n);function d(e){return t;function t(t){let n=t!==null&&e[t],r=t!==null&&e.null;return f([...Array.isArray(n)?n:n?[n]:[],...Array.isArray(r)?r:r?[r]:[]])(t)}}function f(e){return a=e,o=0,e.length===0?i:p(e[o])}function p(e){return n;function n(n){return u=T(),s=e,e.partial||(l.currentConstruct=e),e.name&&l.parser.constructs.disable.null.includes(e.name)?h(n):e.tokenize.call(t?Object.assign(Object.create(l),t):l,c,m,h)(n)}}function m(t){return e(s,u),r}function h(e){return u.restore(),++o<a.length?p(a[o]):i}}}function w(e,t){e.resolveAll&&!a.includes(e)&&a.push(e),e.resolve&&f7(l.events,t,l.events.length-t,e.resolve(l.events.slice(t),l)),e.resolveTo&&(l.events=e.resolveTo(l.events,l))}function T(){let e=m(),t=l.previous,n=l.currentConstruct,i=l.events.length,a=Array.from(s);return{from:i,restore:o};function o(){r=e,l.previous=t,l.currentConstruct=n,l.events.length=i,s=a,E()}}function E(){r.line in i&&r.column<2&&(r.column=i[r.line],r.offset+=i[r.line]-1)}}function sXe(e,t){let n=t.start._index,r=t.start._bufferIndex,i=t.end._index,a=t.end._bufferIndex,o;if(n===i)o=[e[n].slice(r,a)];else{if(o=e.slice(n,i),r>-1){let e=o[0];typeof e==`string`?o[0]=e.slice(r):o.shift()}a>0&&o.push(e[i].slice(0,a))}return o}function cXe(e,t){let n=-1,r=[],i;for(;++n<e.length;){let a=e[n],o;if(typeof a==`string`)o=a;else switch(a){case-5:o=`\r`;break;case-4:o=`
+`+n+`}`}return String(e)}function _Ke({setting:e,onClose:t,onDeleted:n,onDuplicate:r,onEdit:i,hasPermission:a,t:o}){let{showToast:s}=Gd(),c=co(),[l,u]=(0,y.useState)(!1),{data:d,isLoading:f}=K({queryKey:[`cloudSettingDetail`,e.setting_id],queryFn:()=>Z.getCloudSettingDetail(e.setting_id)}),p=q({mutationFn:()=>Z.deleteCloudSetting(e.setting_id),onSuccess:()=>{s(o(`profiles.presets.toast.deleted`)),c.invalidateQueries({queryKey:[`cloudSettings`]}),n()},onError:e=>s(e.message,`error`)}),m=D5(e.setting_id),h=E5(e.name,d?.setting?.inherits);return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,children:(0,G.jsx)(Ld,{className:`w-full max-w-3xl max-h-[90vh] flex flex-col overflow-hidden`,children:(0,G.jsxs)(zd,{className:`p-0 flex flex-col min-h-0 flex-1`,children:[(0,G.jsxs)(`div`,{className:`flex-shrink-0 flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`h2`,{className:`text-xl font-semibold text-white truncate`,children:e.name}),m&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 text-xs font-medium bg-bambu-green/20 text-bambu-green rounded-full`,children:o(`profiles.presets.editable`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mt-1 text-sm text-bambu-gray`,children:[(0,G.jsx)(`span`,{className:`capitalize`,children:o(`profiles.presets.types.${e.type}`)}),h.printer&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{children:`•`}),(0,G.jsx)(`span`,{children:h.printer})]})]})]}),(0,G.jsx)(`button`,{onClick:t,className:`p-2 text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary rounded-lg transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(`div`,{className:`flex-1 min-h-0 overflow-y-auto p-4`,children:f?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-16`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):d?(0,G.jsx)(`pre`,{className:`text-xs text-bambu-gray font-mono whitespace-pre-wrap break-all bg-bambu-dark p-4 rounded-lg border border-bambu-dark-tertiary overflow-x-auto max-w-full`,children:A5(d)}):(0,G.jsx)(`div`,{className:`text-center py-16 text-bambu-gray`,children:o(`profiles.presets.failedToLoadDetails`)})}),l?(0,G.jsxs)(`div`,{className:`flex-shrink-0 p-4 border-t border-bambu-dark-tertiary bg-red-500/5`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3 text-red-700 dark:text-red-400`,children:[(0,G.jsx)(Iu,{className:`w-5 h-5`}),(0,G.jsx)(`span`,{className:`font-medium`,children:o(`profiles.presets.deleteConfirm`)})]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4`,children:o(`profiles.presets.deleteWarning`,{name:e.name})}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>u(!1),disabled:p.isPending,className:`flex-1`,children:o(`common.cancel`)}),(0,G.jsxs)(Q,{variant:`danger`,onClick:()=>p.mutate(),disabled:p.isPending,className:`flex-1`,children:[p.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Nu,{className:`w-4 h-4`}),o(`common.delete`)]})]})]}):(0,G.jsx)(`div`,{className:`flex-shrink-0 p-4 border-t border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:t,className:`flex-1`,children:o(`common.close`)}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:r,disabled:!a(`cloud:auth`),title:a(`cloud:auth`)?void 0:o(`profiles.presets.noDuplicatePermission`),children:[(0,G.jsx)(Vs,{className:`w-4 h-4`}),o(`profiles.presets.duplicate`)]}),m&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:i,disabled:f||!d||!a(`cloud:auth`),title:a(`cloud:auth`)?void 0:o(`profiles.presets.noEditPermission`),children:[(0,G.jsx)(kl,{className:`w-4 h-4`}),o(`common.edit`)]}),(0,G.jsx)(Q,{variant:`danger`,onClick:()=>u(!0),disabled:!a(`cloud:auth`),title:a(`cloud:auth`)?void 0:o(`profiles.presets.noDeletePermission`),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})]})})]})})})}function vKe(){try{let e=localStorage.getItem(`bambusy_preset_templates`);return e?JSON.parse(e):[]}catch{return[]}}function yKe(e){localStorage.setItem(`bambusy_preset_templates`,JSON.stringify(e))}function bKe({onClose:e,onApply:t,t:n}){let{showToast:r}=Gd(),[i,a]=(0,y.useState)(vKe),[o,s]=(0,y.useState)(`all`),[c,l]=(0,y.useState)(null),[u,d]=(0,y.useState)(``),[f,p]=(0,y.useState)(``),[m,h]=(0,y.useState)(`{}`),[g,_]=(0,y.useState)(null),[v,b]=(0,y.useState)(null),x=o===`all`?i:i.filter(e=>e.type===o),S=e=>{a(e),yKe(e)},C=e=>{S(i.filter(t=>t.id!==e)),b(null),r(n(`profiles.templates.toast.deleted`))},w=e=>{l(e.id),d(e.name),p(e.description),h(JSON.stringify(e.settings,null,2)),_(null)},T=()=>{if(!(!c||!u.trim()))try{let e=JSON.parse(m);S(i.map(t=>t.id===c?{...t,name:u.trim(),description:f.trim(),settings:e}:t)),l(null),r(n(`profiles.templates.toast.updated`))}catch(e){_(e.message)}},E=()=>{l(null),d(``),p(``),h(`{}`),_(null)},D=e=>{S(i.map(t=>t.id===e?{...t,showInModal:!t.showInModal}:t))},O={filament:{label:n(`profiles.presets.types.filament`),icon:Xs,color:`text-amber-600 dark:text-amber-400`},print:{label:n(`profiles.presets.types.process`),icon:tu,color:`text-blue-600 dark:text-blue-400`},printer:{label:n(`profiles.presets.types.printer`),icon:Ll,color:`text-purple-600 dark:text-purple-400`}},k=v?i.find(e=>e.id===v):null;return(0,y.useEffect)(()=>{let t=t=>{t.key===`Escape`&&(v?b(null):c?E():e())};return window.addEventListener(`keydown`,t),()=>window.removeEventListener(`keydown`,t)},[v,c,e]),(0,G.jsxs)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,children:[k&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-60`,children:(0,G.jsx)(Ld,{className:`w-full max-w-md`,children:(0,G.jsxs)(zd,{className:`p-6`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mb-4`,children:[(0,G.jsx)(`div`,{className:`p-2 bg-red-500/20 rounded-lg`,children:(0,G.jsx)(Iu,{className:`w-6 h-6 text-red-600 dark:text-red-400`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white`,children:n(`profiles.templates.deleteTitle`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`profiles.templates.deleteWarning`)})]})]}),(0,G.jsx)(`p`,{className:`text-white mb-6`,children:n(`profiles.templates.deleteConfirm`,{name:k.name})}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>b(null),className:`flex-1`,children:n(`common.cancel`)}),(0,G.jsxs)(Q,{onClick:()=>C(v),className:`flex-1 bg-red-500 hover:bg-red-600`,children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),n(`common.delete`)]})]})]})})}),(0,G.jsx)(Ld,{className:`w-full max-w-2xl max-h-[80vh] flex flex-col`,children:(0,G.jsxs)(zd,{className:`p-0 flex flex-col h-full`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(gu,{className:`w-5 h-5 text-amber-600 dark:text-amber-400`}),n(`profiles.templates.title`)]}),(0,G.jsx)(`button`,{onClick:e,className:`text-bambu-gray hover:text-white`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:n(`profiles.templates.typeFilter`)}),[`all`,`filament`,`print`,`printer`].map(e=>(0,G.jsx)(`button`,{onClick:()=>s(e),className:`px-3 py-1 text-sm rounded-lg transition-colors ${o===e?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,children:e===`all`?n(`common.all`):O[e].label},e))]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto p-4`,children:x.length===0?(0,G.jsxs)(`div`,{className:`text-center py-12 text-bambu-gray`,children:[(0,G.jsx)(gu,{className:`w-12 h-12 mx-auto mb-4 opacity-30`}),(0,G.jsx)(`p`,{children:n(`profiles.templates.noTemplates`)}),(0,G.jsx)(`p`,{className:`text-sm mt-1`,children:n(`profiles.templates.createFirst`)})]}):(0,G.jsx)(`div`,{className:`space-y-2`,children:x.map(e=>{let r=O[e.type],i=r.icon;return c===e.id?(0,G.jsxs)(`div`,{className:`p-4 bg-bambu-dark rounded-lg border border-bambu-green`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3 mb-3`,children:[(0,G.jsx)(`input`,{type:`text`,value:u,onChange:e=>d(e.target.value),placeholder:n(`profiles.templates.namePlaceholder`),className:`px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,autoFocus:!0}),(0,G.jsx)(`input`,{type:`text`,value:f,onChange:e=>p(e.target.value),placeholder:n(`profiles.templates.descriptionPlaceholder`),className:`px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`mb-3`,children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray mb-1 block`,children:n(`profiles.templates.settingsJson`)}),(0,G.jsx)(`textarea`,{value:m,onChange:e=>{h(e.target.value),_(null)},rows:6,className:`w-full px-3 py-2 bg-bambu-dark-secondary border rounded text-white text-sm font-mono focus:outline-none ${g?`border-red-500`:`border-bambu-dark-tertiary focus:border-bambu-green`}`}),g&&(0,G.jsx)(`p`,{className:`text-xs text-red-700 dark:text-red-400 mt-1`,children:g})]}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(Q,{size:`sm`,onClick:T,disabled:!u.trim(),children:[(0,G.jsx)(Kl,{className:`w-4 h-4`}),`Save`]}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:E,children:`Cancel`})]})]},e.id):(0,G.jsxs)(`div`,{className:`flex items-center gap-3 p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary hover:border-bambu-gray-dark transition-colors`,children:[(0,G.jsx)(i,{className:`w-5 h-5 ${r.color} flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white`,children:e.name}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray truncate`,children:e.description})]}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray-dark px-2 py-1 bg-bambu-dark-secondary rounded`,children:n(`profiles.templates.fieldsCount`,{count:Object.keys(e.settings).length})}),(0,G.jsx)(`button`,{onClick:()=>D(e.id),className:`p-1 transition-colors ${e.showInModal?`text-bambu-green hover:text-bambu-green/70`:`text-bambu-gray hover:text-white`}`,title:e.showInModal?n(`profiles.templates.shownInModals`):n(`profiles.templates.hiddenInModals`),children:e.showInModal?(0,G.jsx)(ic,{className:`w-4 h-4`}):(0,G.jsx)(rc,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>t(e),className:`px-3 py-1 text-xs bg-bambu-green/20 text-bambu-green rounded hover:bg-bambu-green/30 transition-colors`,children:n(`profiles.templates.apply`)}),(0,G.jsx)(`button`,{onClick:()=>w(e),className:`p-1 text-bambu-gray hover:text-white`,title:n(`common.edit`),children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>b(e.id),className:`p-1 text-bambu-gray hover:text-red-600 dark:hover:text-red-400`,title:n(`common.delete`),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]},e.id)})})})]})})]})}function xKe({onClose:e,leftPreset:t,rightPreset:n,leftLabel:r,rightLabel:i,t:a}){let[o,s]=(0,y.useState)(`changes`),[c,l]=(0,y.useState)(``),u=(0,y.useMemo)(()=>{let e=new Set([...Object.keys(t),...Object.keys(n)]),r=[];for(let i of e){if(i===`inherits`||i===`version`)continue;let e=t[i],a=n[i],o=i in t,s=i in n,c;c=!o&&s?`added`:o&&!s?`removed`:JSON.stringify(e)===JSON.stringify(a)?`same`:`changed`,r.push({key:i,left:e,right:a,status:c})}return r.sort((e,t)=>{let n={changed:0,added:1,removed:2,same:3};return n[e.status]===n[t.status]?e.key.localeCompare(t.key):n[e.status]-n[t.status]})},[t,n]),d=(0,y.useMemo)(()=>{let e=[...u];if(o===`changes`&&(e=e.filter(e=>e.status!==`same`)),c){let t=c.toLowerCase();e=e.filter(e=>e.key.toLowerCase().includes(t)||String(e.left).toLowerCase().includes(t)||String(e.right).toLowerCase().includes(t))}return e},[u,o,c]),f=(0,y.useMemo)(()=>({added:u.filter(e=>e.status===`added`).length,removed:u.filter(e=>e.status===`removed`).length,changed:u.filter(e=>e.status===`changed`).length,same:u.filter(e=>e.status===`same`).length}),[u]),p=e=>{if(e===void 0)return`—`;if(e===null)return`null`;if(Array.isArray(e))return e.length===0?`[]`:e.length===1?String(e[0]):e.join(`, `);if(typeof e==`object`)return JSON.stringify(e);let t=String(e);if(t.includes(`\\n`)||t.length>100){let e=t.split(`\\n`).length;if(e>1)return`[${e} lines of G-code/script]`;if(t.length>100)return t.substring(0,100)+`…`}return t};return(0,y.useEffect)(()=>{let t=t=>{t.key===`Escape`&&e()};return window.addEventListener(`keydown`,t),()=>window.removeEventListener(`keydown`,t)},[e]),(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,children:(0,G.jsx)(Ld,{className:`w-full max-w-4xl max-h-[85vh] flex flex-col overflow-hidden`,children:(0,G.jsxs)(zd,{className:`p-0 flex flex-col min-h-0 flex-1`,children:[(0,G.jsxs)(`div`,{className:`flex-shrink-0 flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Dc,{className:`w-5 h-5 text-blue-600 dark:text-blue-400`}),a(`profiles.diff.title`)]}),(0,G.jsx)(`button`,{onClick:e,className:`text-bambu-gray hover:text-white`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`flex-shrink-0 grid grid-cols-2 gap-4 p-4 border-b border-bambu-dark-tertiary bg-bambu-dark`,children:[(0,G.jsxs)(`div`,{className:`text-center`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:a(`profiles.diff.left`)}),(0,G.jsx)(`p`,{className:`text-white font-medium truncate`,children:r})]}),(0,G.jsxs)(`div`,{className:`text-center`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:a(`profiles.diff.right`)}),(0,G.jsx)(`p`,{className:`text-white font-medium truncate`,children:i})]})]}),(0,G.jsxs)(`div`,{className:`flex-shrink-0 flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-4 text-sm`,children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-green-700 dark:text-green-400`,children:[(0,G.jsx)(Pl,{className:`w-3.5 h-3.5`}),f.added,` `,a(`profiles.diff.added`)]}),(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-red-700 dark:text-red-400`,children:[(0,G.jsx)(pl,{className:`w-3.5 h-3.5`}),f.removed,` `,a(`profiles.diff.removed`)]}),(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-amber-700 dark:text-amber-400`,children:[(0,G.jsx)(zo,{className:`w-3.5 h-3.5`}),f.changed,` `,a(`profiles.diff.changed`)]}),(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-bambu-gray`,children:[(0,G.jsx)(ec,{className:`w-3.5 h-3.5`}),f.same,` `,a(`profiles.diff.same`)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-2 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:c,onChange:e=>l(e.target.value),placeholder:a(`profiles.diff.searchFields`),className:`pl-8 pr-3 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none w-48`})]}),f.same>0&&(0,G.jsxs)(`div`,{className:`flex rounded overflow-hidden border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`button`,{onClick:()=>s(`changes`),className:`px-3 py-1.5 text-sm transition-colors ${o===`changes`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,children:a(`profiles.diff.changes`)}),(0,G.jsx)(`button`,{onClick:()=>s(`all`),className:`px-3 py-1.5 text-sm transition-colors ${o===`all`?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,children:a(`common.all`)})]})]})]}),(0,G.jsx)(`div`,{className:`flex-1 min-h-0 overflow-y-auto`,children:d.length===0?(0,G.jsxs)(`div`,{className:`text-center py-12 text-bambu-gray`,children:[(0,G.jsx)(ec,{className:`w-12 h-12 mx-auto mb-4 opacity-30`}),(0,G.jsx)(`p`,{children:a(o===`changes`?`profiles.diff.noDifferences`:`profiles.diff.noFieldsMatch`)})]}):(0,G.jsxs)(`table`,{className:`w-full`,children:[(0,G.jsx)(`thead`,{className:`sticky top-0 bg-bambu-dark-secondary`,children:(0,G.jsxs)(`tr`,{className:`text-sm text-bambu-gray border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`th`,{className:`text-left p-3 w-1/3`,children:a(`profiles.diff.field`)}),(0,G.jsx)(`th`,{className:`text-left p-3 w-1/3`,children:r}),(0,G.jsx)(`th`,{className:`text-left p-3 w-1/3`,children:i})]})}),(0,G.jsx)(`tbody`,{children:d.map(e=>{let t={added:`bg-green-500/10`,removed:`bg-red-500/10`,changed:`bg-amber-500/10`,same:``}[e.status],n={added:(0,G.jsx)(Pl,{className:`w-3.5 h-3.5 text-green-600 dark:text-green-400`}),removed:(0,G.jsx)(pl,{className:`w-3.5 h-3.5 text-red-600 dark:text-red-400`}),changed:(0,G.jsx)(zo,{className:`w-3.5 h-3.5 text-amber-600 dark:text-amber-400`}),same:(0,G.jsx)(ec,{className:`w-3.5 h-3.5 text-bambu-gray-dark`})}[e.status];return(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary ${t}`,children:[(0,G.jsx)(`td`,{className:`p-3`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[n,(0,G.jsx)(`span`,{className:`text-sm text-white font-mono`,children:e.key})]})}),(0,G.jsx)(`td`,{className:`p-3`,children:(0,G.jsx)(`span`,{className:`text-sm font-mono break-all ${e.status===`removed`?`text-red-700 dark:text-red-300`:e.status===`changed`?`text-white`:`text-bambu-gray`}`,children:p(e.left)})}),(0,G.jsx)(`td`,{className:`p-3`,children:(0,G.jsx)(`span`,{className:`text-sm font-mono break-all ${e.status===`added`?`text-green-700 dark:text-green-300`:e.status===`changed`?`text-white`:`text-bambu-gray`}`,children:p(e.right)})})]},e.key)})})]})})]})})})}function SKe({onClose:e,initialData:t,allPresets:n,t:r}){let{showToast:i}=Gd(),a=co(),o=!!t?.setting_id,[s,c]=(0,y.useState)(`common`),[l,u]=(0,y.useState)(t?.type||`filament`),[d,f]=(0,y.useState)(t?.name?o?t.name:`${t.name} (Copy)`:``),[p,m]=(0,y.useState)(t?.base_id||``),[h,g]=(0,y.useState)(``),[_,v]=(0,y.useState)(t?.setting||{inherits:``}),[b,x]=(0,y.useState)(JSON.stringify(t?.setting||{inherits:``},null,2)),[S,C]=(0,y.useState)(null),[w,T]=(0,y.useState)(``),[E,D]=(0,y.useState)(!1),[O,k]=(0,y.useState)(``),[A,j]=(0,y.useState)(!1),[M,N]=(0,y.useState)(vKe),[P,F]=(0,y.useState)(!1),[I,L]=(0,y.useState)(``),[R,z]=(0,y.useState)(``),[B,V]=(0,y.useState)(!0),[ee,te]=(0,y.useState)(null),[ne,re]=(0,y.useState)(!1),ie=(0,y.useMemo)(()=>({filament:n.filament,print:n.process,printer:n.printer})[l]||[],[n,l]),ae=(0,y.useMemo)(()=>ie.filter(e=>D5(e.setting_id)),[ie]),{data:oe}=K({queryKey:[`cloudFields`,l],queryFn:()=>Z.getCloudFields(l===`print`?`process`:l),staleTime:1e3*60*60}),{data:se}=K({queryKey:[`allPresetDetails`,l,ae.map(e=>e.setting_id).join(`,`)],queryFn:async()=>{let e={};for(let t=0;t<ae.length;t+=5){let n=ae.slice(t,t+5);(await Promise.all(n.map(async e=>{try{let t=await Z.getCloudSettingDetail(e.setting_id);return{id:e.setting_id,detail:t}}catch{return null}}))).forEach(t=>{t&&(e[t.id]=t.detail)})}return e},enabled:ae.length>0,staleTime:1e3*60*10}),{data:H,isLoading:ce}=K({queryKey:[`cloudSettingDetail`,p],queryFn:()=>Z.getCloudSettingDetail(p),enabled:!!p});(0,y.useEffect)(()=>{s!==`json`&&x(JSON.stringify(_,null,2))},[_,s]);let le=(0,y.useMemo)(()=>({filament:n.filament,print:n.process,printer:n.printer}[l]||[]).filter(e=>!D5(e.setting_id)).sort((e,t)=>e.name.localeCompare(t.name)),[n,l]);(0,y.useEffect)(()=>{if(!p)return;let e=le.find(e=>e.setting_id===p);e&&(g(e.name),o||(v({inherits:e.name}),x(JSON.stringify({inherits:e.name},null,2))))},[p,le,o]);let ue=(0,y.useMemo)(()=>{let e=oe?.fields||[],t=new Set(e.map(e=>e.key)),n=new Set,i=new Set([`inherits`,`updated_time`,`compatible_printers`,`compatible_prints`]);se&&Object.values(se).forEach(e=>{e?.setting&&Object.keys(e.setting).forEach(e=>{!t.has(e)&&!i.has(e)&&n.add(e)})}),Object.keys(_).forEach(e=>{!t.has(e)&&!i.has(e)&&n.add(e)});let a=Array.from(n).sort().map(e=>({key:e,label:e.replace(/_/g,` `).replace(/\b\w/g,e=>e.toUpperCase()),type:`text`,category:`discovered`,description:r(`profiles.presets.discoveredFromPresets`)}));return[...e,...a]},[oe,se,_,r]),de=ue.filter(e=>e.label.toLowerCase().includes(w.toLowerCase())||e.key.toLowerCase().includes(w.toLowerCase())),fe=()=>{if(O.trim()){let e=O.trim().toLowerCase().replace(/\s+/g,`_`);pe(e,``),k(``),j(!1),i(r(`profiles.presets.toast.fieldAdded`,{key:e}))}},pe=(e,t)=>{v(n=>{let r={...n};return t===``||t===void 0?delete r[e]:r[e]=t,r})},me=e=>{v(t=>({...t,...e.settings})),te(e.name),i(r(`profiles.templates.toast.applied`))},he=()=>{if(!I.trim())return;let e={..._};if(delete e.inherits,Object.keys(e).length===0){i(r(`profiles.presets.noOverridesToSave`),`error`);return}let t={id:Date.now().toString(),name:I.trim(),description:R.trim()||r(`profiles.presets.customTemplate`),type:l,settings:e,showInModal:B},n=[...M,t];N(n),yKe(n),F(!1),L(``),z(``),V(!0),i(r(`profiles.templates.toast.created`))},ge=(0,y.useMemo)(()=>M.filter(e=>e.type===l&&e.showInModal),[l,M]),_e=e=>{x(e);try{v(JSON.parse(e)),C(null)}catch(e){C(e.message)}},ve=e=>{e.preventDefault(),D(!1);let t=e.dataTransfer.files[0];if(t&&t.name.endsWith(`.json`)){let e=new FileReader;e.onload=e=>{try{let t=e.target?.result,n=JSON.parse(t),a=n.setting||n;v(e=>({...e,...a})),x(JSON.stringify({..._,...a},null,2)),i(r(`profiles.presets.fileImported`))}catch{i(r(`profiles.presets.invalidJsonFile`),`error`)}},e.readAsText(t)}},ye=q({mutationFn:()=>{let e={..._},t=l===`filament`?`filament_settings_id`:l===`print`?`print_settings_id`:`printer_settings_id`;e[t]=`"${d}"`;let n={type:l,name:d,base_id:p,setting:e};return Z.createCloudSetting(n)},onSuccess:async()=>{i(r(`profiles.presets.toast.created`)),await a.refetchQueries({queryKey:[`cloudSettings`]}),e()},onError:e=>i(e.message,`error`)}),be=q({mutationFn:()=>{if(!t?.setting_id)throw Error(r(`profiles.presets.noSettingId`));return Z.updateCloudSetting(t.setting_id,{name:d,setting:_})},onSuccess:async()=>{i(r(`profiles.presets.toast.updated`)),a.removeQueries({queryKey:[`cloudSettingDetail`]}),await a.refetchQueries({queryKey:[`cloudSettings`]}),e()},onError:e=>i(e.message,`error`)}),xe=o?be:ye,Se=H?.setting?.inherits,Ce=Se?le.find(e=>e.name===Se):void 0,{data:we}=K({queryKey:[`cloudSettingDetail`,Ce?.setting_id],queryFn:()=>Z.getCloudSettingDetail(Ce.setting_id),enabled:!!Ce?.setting_id}),Te=(0,y.useMemo)(()=>{let e=we?.setting||{},t=H?.setting||{},n=p&&se?.[p]?.setting?se[p].setting:{};return{...e,...t,...n}},[p,H,we,se]),Ee=e=>{if(e==null)return``;if(Array.isArray(e)){let t=[...new Set(e.map(e=>String(e)))];return t.length===1?t[0]:e.join(`, `)}return String(e)},De=e=>{let t=_[e.key],n=Te[e.key],i=Ee(n),a=ce?r(`common.loading`):i||``,o=`w-full px-3 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`;if(e.type===`boolean`){let r=t===`1`||t===void 0&&n===`1`;return(0,G.jsx)(`button`,{type:`button`,onClick:()=>pe(e.key,t===`1`?`0`:`1`),className:`w-8 h-5 rounded-full transition-colors ${r?`bg-bambu-green`:`bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(`div`,{className:`w-4 h-4 rounded-full bg-white shadow transition-transform ${r?`translate-x-3.5`:`translate-x-0.5`}`})})}return e.type===`select`?(0,G.jsxs)(`select`,{value:t||``,onChange:t=>pe(e.key,t.target.value),className:o,children:[(0,G.jsx)(`option`,{value:``,children:a}),e.options?.map(e=>(0,G.jsx)(`option`,{value:e.value,children:e.label},e.value))]}):(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:e.type===`number`?`number`:`text`,value:t===void 0?``:String(t),onChange:t=>pe(e.key,t.target.value),step:e.step,min:e.min,max:e.max,placeholder:a,className:o}),e.unit&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray whitespace-nowrap`,children:e.unit})]})},Oe=(0,y.useMemo)(()=>H?.setting?H.setting:{},[H]);return(0,G.jsxs)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4`,onDragOver:e=>{e.preventDefault(),D(!0)},onDragLeave:()=>D(!1),onDrop:ve,children:[ne&&p&&(0,G.jsx)(xKe,{onClose:()=>re(!1),leftPreset:Oe,rightPreset:_,leftLabel:r(`profiles.presets.baseLabel`,{name:h||p}),rightLabel:r(`profiles.presets.currentLabel`,{name:d||r(`profiles.presets.newPreset`)}),t:r}),(0,G.jsx)(Ld,{className:`w-full max-w-6xl max-h-[90vh] flex flex-col overflow-y-auto`,children:(0,G.jsxs)(zd,{className:`p-0 flex flex-col h-full`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h2`,{className:`text-xl font-semibold text-white`,children:r(o?`profiles.presets.editPreset`:t?`profiles.presets.duplicatePreset`:`profiles.presets.createNewPreset`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:r(`profiles.presets.customizeSettings`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[p&&(0,G.jsxs)(`button`,{onClick:()=>re(!0),className:`flex items-center gap-2 px-3 py-2 text-sm text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary rounded-lg transition-colors`,title:r(`profiles.presets.compareWithBase`),children:[(0,G.jsx)(Dc,{className:`w-4 h-4`}),r(`profiles.presets.compare`)]}),(0,G.jsx)(`button`,{onClick:e,className:`p-2 text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary rounded-lg transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]})]}),E&&(0,G.jsx)(`div`,{className:`absolute inset-0 bg-bambu-green/10 border-2 border-dashed border-bambu-green rounded-lg flex items-center justify-center z-10`,children:(0,G.jsxs)(`div`,{className:`text-center`,children:[(0,G.jsx)(Bu,{className:`w-12 h-12 text-bambu-green mx-auto mb-2`}),(0,G.jsx)(`p`,{className:`text-bambu-green font-medium`,children:r(`profiles.presets.dropJsonToImport`)})]})}),(0,G.jsxs)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary space-y-3`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-3 gap-4 max-[640px]:grid-cols-1`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`common.type`)}),(0,G.jsxs)(`select`,{value:l,onChange:e=>{u(e.target.value),m(``)},className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`filament`,children:r(`profiles.presets.types.filament`)}),(0,G.jsx)(`option`,{value:`print`,children:r(`profiles.presets.types.process`)}),(0,G.jsx)(`option`,{value:`printer`,children:r(`profiles.presets.types.printer`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`profiles.presets.basePreset`)}),(0,G.jsxs)(`select`,{value:p,onChange:e=>m(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:``,children:r(`profiles.presets.selectBasePreset`)}),le.map(e=>(0,G.jsx)(`option`,{value:e.setting_id,children:e.name},e.setting_id))]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:r(`profiles.presets.presetName`)}),(0,G.jsx)(`input`,{type:`text`,value:d,onChange:e=>f(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none`,placeholder:r(`profiles.presets.myCustomPreset`)})]})]}),h&&(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray`,children:(0,G.jsxs)(`p`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(fs,{className:`w-3 h-3 text-bambu-green`}),r(`profiles.presets.inheritsFrom`),` `,(0,G.jsx)(`span`,{className:`text-white`,children:h}),ce&&(0,G.jsx)(Y,{className:`w-3 h-3 animate-spin ml-1`})]})})]}),(0,G.jsxs)(`div`,{className:`flex border-b border-bambu-dark-tertiary max-[640px]:flex-wrap max-[640px]:items-center`,children:[(0,G.jsxs)(`button`,{onClick:()=>c(`common`),className:`flex items-center gap-2 px-4 py-3 text-sm font-medium transition-colors border-b-2 -mb-px ${s===`common`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-white border-transparent`}`,children:[(0,G.jsx)(fu,{className:`w-4 h-4`}),r(`profiles.presets.tabs.common`)]}),(0,G.jsxs)(`button`,{onClick:()=>c(`fields`),className:`flex items-center gap-2 px-4 py-3 text-sm font-medium transition-colors border-b-2 -mb-px ${s===`fields`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-white border-transparent`}`,children:[(0,G.jsx)($c,{className:`w-4 h-4`}),r(`profiles.presets.tabs.allFields`)]}),(0,G.jsxs)(`button`,{onClick:()=>c(`json`),className:`flex items-center gap-2 px-4 py-3 text-sm font-medium transition-colors border-b-2 -mb-px ${s===`json`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-white border-transparent`}`,children:[(0,G.jsx)(Fs,{className:`w-4 h-4`}),`JSON`,S&&(0,G.jsx)(ys,{className:`w-3 h-3 text-red-600 dark:text-red-400`})]}),(0,G.jsx)(`div`,{className:`flex-1 max-[640px]:hidden`}),(0,G.jsxs)(`button`,{onClick:()=>{let e=new Blob([JSON.stringify({name:d,type:l,base_id:p,setting:_},null,2)],{type:`application/json`}),t=URL.createObjectURL(e),n=document.createElement(`a`);n.href=t,n.download=`${d||`preset`}.json`,document.body.appendChild(n),n.click(),document.body.removeChild(n),URL.revokeObjectURL(t),i(r(`profiles.presets.toast.exported`))},className:`flex items-center gap-2 px-4 py-3 text-sm text-bambu-gray hover:text-white transition-colors`,title:r(`profiles.presets.exportToJson`),children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),r(`common.download`)]}),(0,G.jsxs)(`button`,{onClick:()=>document.getElementById(`file-import`)?.click(),className:`flex items-center gap-2 px-4 py-3 text-sm text-bambu-gray hover:text-white transition-colors`,title:r(`profiles.presets.importFromJson`),children:[(0,G.jsx)(Bu,{className:`w-4 h-4`}),r(`common.upload`)]}),(0,G.jsx)(`input`,{id:`file-import`,type:`file`,accept:`.json`,className:`hidden`,onChange:e=>{let t=e.target.files?.[0];if(t){let e=new FileReader;e.onload=e=>{try{let t=JSON.parse(e.target?.result),n=t.setting||t;v(e=>({...e,...n})),i(r(`profiles.presets.fileImported`))}catch{i(r(`profiles.presets.invalidJson`),`error`)}},e.readAsText(t)}}})]}),(0,G.jsxs)(`div`,{className:`flex-1 p-4`,children:[s===`common`&&(0,G.jsxs)(`div`,{className:`space-y-6`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3`,children:[(0,G.jsxs)(`h3`,{className:`text-sm font-medium text-white flex items-center gap-2`,children:[(0,G.jsx)(gu,{className:`w-4 h-4 text-amber-600 dark:text-amber-400`}),r(`profiles.templates.title`)]}),Object.keys(_).filter(e=>e!==`inherits`).length>0&&(0,G.jsxs)(`button`,{onClick:()=>F(!P),className:`text-xs text-bambu-gray hover:text-white flex items-center gap-1 transition-colors`,children:[(0,G.jsx)(Kl,{className:`w-3 h-3`}),r(`profiles.presets.saveAsTemplate`)]})]}),P&&(0,G.jsxs)(`div`,{className:`mb-3 p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2 mb-2`,children:[(0,G.jsx)(`input`,{type:`text`,value:I,onChange:e=>L(e.target.value),placeholder:r(`profiles.templates.namePlaceholder`),className:`px-3 py-1.5 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`,autoFocus:!0}),(0,G.jsx)(`input`,{type:`text`,value:R,onChange:e=>z(e.target.value),placeholder:r(`profiles.templates.descriptionPlaceholder`),className:`px-3 py-1.5 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(Q,{size:`sm`,onClick:he,disabled:!I.trim(),children:[(0,G.jsx)(Kl,{className:`w-3 h-3`}),r(`common.save`)]}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>F(!1),children:r(`common.cancel`)})]}),(0,G.jsxs)(`button`,{onClick:()=>V(!B),className:`flex items-center gap-1.5 text-xs transition-colors ${B?`text-bambu-green`:`text-bambu-gray hover:text-white`}`,children:[B?(0,G.jsx)(ic,{className:`w-3.5 h-3.5`}):(0,G.jsx)(rc,{className:`w-3.5 h-3.5`}),r(B?`profiles.templates.shownInModals`:`profiles.templates.hiddenInModals`)]})]})]}),ee&&(0,G.jsxs)(`div`,{className:`mb-3 px-3 py-2 bg-bambu-green/10 border border-bambu-green/30 rounded-lg flex items-center gap-2`,children:[(0,G.jsx)(fs,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsxs)(`span`,{className:`text-sm text-bambu-green`,children:[r(`profiles.presets.templateApplied`),` `,(0,G.jsx)(`span`,{className:`font-medium`,children:ee})]}),(0,G.jsx)(`button`,{onClick:()=>te(null),className:`ml-auto text-bambu-green/70 hover:text-bambu-green`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-3 gap-2`,children:[ge.map(e=>(0,G.jsxs)(`button`,{onClick:()=>me(e),className:`p-3 text-left bg-bambu-dark border border-bambu-dark-tertiary rounded-lg hover:border-bambu-gray-dark transition-colors`,children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white`,children:e.name}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:e.description})]},e.id)),ge.length===0&&(0,G.jsx)(`p`,{className:`col-span-3 text-center text-bambu-gray text-sm py-4`,children:r(`profiles.presets.noTemplatesSelected`)})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-dark mt-2 text-center`,children:r(`profiles.presets.manageTemplatesHint`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white mb-3`,children:r(`profiles.presets.commonSettings`)}),(0,G.jsx)(`div`,{className:`grid grid-cols-2 gap-x-6 gap-y-3`,children:ue.slice(0,10).map(e=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-4 max-[640px]:flex-col max-[640px]:items-start`,children:[(0,G.jsx)(`label`,{className:`text-sm text-bambu-gray flex-shrink-0`,children:e.label}),(0,G.jsx)(`div`,{className:`w-48 max-[640px]:w-full`,children:De(e)})]},e.key))})]}),Object.keys(_).length>1&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white mb-3`,children:r(`profiles.presets.currentOverrides`)}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-2`,children:Object.entries(_).filter(([e])=>e!==`inherits`).map(([e,t])=>(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 px-2 py-1 bg-bambu-green/10 text-bambu-green text-xs rounded`,children:[e,`: `,String(t).slice(0,20),(0,G.jsx)(`button`,{onClick:()=>pe(e,void 0),className:`hover:text-white`,children:(0,G.jsx)(td,{className:`w-3 h-3`})})]},e))})]})]}),s===`fields`&&(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-6`,style:{height:`400px`},children:[(0,G.jsxs)(`div`,{className:`flex flex-col h-full overflow-hidden`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3 flex-shrink-0`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white`,children:r(`profiles.presets.availableFields`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:se?r(`profiles.templates.fieldsCount`,{count:ue.length}):r(`common.loading`)})]}),(0,G.jsxs)(`div`,{className:`relative mb-3 flex-shrink-0`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:w,onChange:e=>T(e.target.value),placeholder:r(`profiles.presets.searchFieldsPlaceholder`),className:`w-full pl-10 pr-4 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder-bambu-gray-dark focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`flex-1 overflow-y-auto space-y-1 pr-2 min-h-0`,children:[de.filter(e=>!(e.key in _)).map(e=>{let t=Te[e.key],n=Ee(t);return(0,G.jsxs)(`div`,{onClick:()=>{v(t=>({...t,[e.key]:n||``}))},className:`flex items-center justify-between gap-2 p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors cursor-pointer group`,children:[(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white truncate`,children:e.label}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-dark truncate`,children:e.key})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-shrink-0`,children:[n&&(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray bg-bambu-dark px-2 py-0.5 rounded max-w-32 truncate`,title:n,children:[n.slice(0,20),n.length>20?`...`:``]}),(0,G.jsx)(`div`,{className:`w-6 h-6 flex items-center justify-center rounded bg-bambu-dark-tertiary group-hover:bg-bambu-green/20 transition-colors`,children:(0,G.jsx)(Pl,{className:`w-4 h-4 text-bambu-gray group-hover:text-bambu-green transition-colors`})})]})]},e.key)}),de.filter(e=>!(e.key in _)).length===0&&(0,G.jsx)(`p`,{className:`text-center text-bambu-gray py-4 text-sm`,children:r(w?`profiles.presets.noMatchingFields`:`profiles.presets.allFieldsAdded`)})]}),(0,G.jsx)(`div`,{className:`pt-3 mt-3 border-t border-bambu-dark-tertiary flex-shrink-0`,children:A?(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`input`,{type:`text`,value:O,onChange:e=>k(e.target.value),onKeyDown:e=>e.key===`Enter`&&fe(),placeholder:`custom_field_name`,className:`flex-1 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white font-mono text-sm placeholder-bambu-gray-dark focus:border-bambu-green focus:outline-none`,autoFocus:!0}),(0,G.jsx)(Q,{size:`sm`,onClick:fe,disabled:!O.trim(),children:(0,G.jsx)(Pl,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>{j(!1),k(``)},children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}):(0,G.jsxs)(`button`,{onClick:()=>j(!0),className:`w-full flex items-center justify-center gap-2 p-2 text-sm text-bambu-gray hover:text-white border border-dashed border-bambu-dark-tertiary hover:border-bambu-gray-dark rounded-lg transition-colors`,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),r(`profiles.presets.addCustomField`)]})})]}),(0,G.jsxs)(`div`,{className:`flex flex-col h-full overflow-hidden`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3 flex-shrink-0`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white`,children:r(`profiles.presets.yourOverrides`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:r(`profiles.templates.fieldsCount`,{count:Object.keys(_).filter(e=>e!==`inherits`).length})})]}),(0,G.jsxs)(`div`,{className:`flex-1 overflow-y-auto space-y-2 pr-2 min-h-0`,children:[Object.entries(_).filter(([e])=>e!==`inherits`).map(([e,t])=>{let n=ue.find(t=>t.key===e);return(0,G.jsxs)(`div`,{className:`p-3 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white`,children:n?.label||e}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-dark`,children:e})]}),(0,G.jsx)(`button`,{onClick:()=>pe(e,void 0),className:`p-1 text-bambu-gray hover:text-red-600 dark:hover:text-red-400 transition-colors`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}),n?De(n):(0,G.jsx)(`input`,{type:`text`,value:String(t),onChange:t=>pe(e,t.target.value),className:`w-full px-3 py-1.5 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none`})]},e)}),Object.keys(_).filter(e=>e!==`inherits`).length===0&&(0,G.jsxs)(`div`,{className:`text-center py-8 text-bambu-gray`,children:[(0,G.jsx)(fu,{className:`w-8 h-8 mx-auto mb-2 opacity-50`}),(0,G.jsx)(`p`,{className:`text-sm`,children:r(`profiles.presets.noOverridesYet`)}),(0,G.jsx)(`p`,{className:`text-xs mt-1`,children:r(`profiles.presets.clickFieldsToAdd`)})]})]}),Object.keys(_).filter(e=>e!==`inherits`).length>0&&(0,G.jsx)(`div`,{className:`pt-3 mt-3 border-t border-bambu-dark-tertiary flex-shrink-0`,children:(0,G.jsxs)(`button`,{onClick:()=>{F(!0),c(`common`)},className:`w-full flex items-center justify-center gap-2 p-2 text-sm text-bambu-gray hover:text-white border border-dashed border-bambu-dark-tertiary hover:border-bambu-gray-dark rounded-lg transition-colors`,children:[(0,G.jsx)(Kl,{className:`w-4 h-4`}),r(`profiles.presets.saveAsTemplate`)]})})]})]}),s===`json`&&(0,G.jsxs)(`div`,{className:`space-y-2`,children:[S&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-red-700 dark:text-red-400 text-sm`,children:[(0,G.jsx)(ys,{className:`w-4 h-4`}),S]}),(0,G.jsx)(`textarea`,{value:b,onChange:e=>_e(e.target.value),className:`w-full h-80 px-3 py-2 bg-bambu-dark border rounded-lg text-white text-xs font-mono focus:outline-none resize-none ${S?`border-red-500 focus:border-red-500`:`border-bambu-dark-tertiary focus:border-bambu-green`}`,spellCheck:!1}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:r(`profiles.presets.jsonTip`)})]})]}),(0,G.jsxs)(`div`,{className:`p-4 border-t border-bambu-dark-tertiary flex gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:e,className:`flex-1`,children:r(`common.cancel`)}),(0,G.jsxs)(Q,{onClick:()=>xe.mutate(),disabled:xe.isPending||!d.trim()||!o&&!p||!!S,className:`flex-1`,children:[xe.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):o?(0,G.jsx)(Kl,{className:`w-4 h-4`}):(0,G.jsx)(Pl,{className:`w-4 h-4`}),r(o?`common.save`:t?`common.duplicate`:`common.create`)]})]})]})})]})}function CKe({settings:e,lastSyncTime:t,onRefresh:n,isRefreshing:r,printers:i,hasPermission:a,t:o}){let[s,c]=(0,y.useState)(``),[l,u]=(0,y.useState)(`all`),[d,f]=(0,y.useState)(`all`),[p,m]=(0,y.useState)(`all`),[h,g]=(0,y.useState)(`all`),[_,v]=(0,y.useState)(`all`),[b,x]=(0,y.useState)(`all`),[S,C]=(0,y.useState)(null),[w,T]=(0,y.useState)(!1),[E,D]=(0,y.useState)(!1),[O,k]=(0,y.useState)(null),[A,j]=(0,y.useState)(null),[M,N]=(0,y.useState)(null),[P,F]=(0,y.useState)(!1),[I,L]=(0,y.useState)([null,null]),[R,z]=(0,y.useState)(!1),[B,V]=(0,y.useState)(null),ee=co(),te=(0,y.useMemo)(()=>[...e.filament.map(e=>({...e,type:`filament`})),...e.printer.map(e=>({...e,type:`printer`})),...e.process.map(e=>({...e,type:`process`}))].map(e=>({...e,meta:E5(e.name)})),[e]),ne=(0,y.useMemo)(()=>{let e=new Set,t=new Set,n=new Set;return te.forEach(r=>{r.meta.nozzle&&e.add(r.meta.nozzle),r.meta.filamentType&&t.add(r.meta.filamentType),r.meta.layerHeight&&n.add(r.meta.layerHeight)}),{printers:i.map(e=>({id:e.id.toString(),name:e.name})),nozzles:Array.from(e).sort((e,t)=>parseFloat(e)-parseFloat(t)),filaments:Array.from(t).sort(),layerHeights:Array.from(n).sort((e,t)=>parseFloat(e)-parseFloat(t))}},[te,i]),re=(0,y.useMemo)(()=>p===`all`?null:i.find(e=>e.id.toString()===p)?.model||null,[p,i]),ie=(0,y.useMemo)(()=>te.filter(e=>l===`all`||e.type===l).filter(e=>{if(d===`all`)return!0;let t=D5(e.setting_id);return d===`custom`?t:!t}).filter(e=>{if(p===`all`||!re)return!0;let t=e.meta.printer?.toLowerCase()||``,n=re.toLowerCase();return t.includes(n)||n.includes(t)}).filter(e=>h===`all`||e.meta.nozzle===h).filter(e=>_===`all`||e.meta.filamentType===_).filter(e=>b===`all`||e.meta.layerHeight===b).filter(e=>s===``||e.name.toLowerCase().includes(s.toLowerCase())).sort((e,t)=>e.name.localeCompare(t.name)),[te,l,d,p,re,h,_,b,s]),ae=e=>{if(P){let t=I[0]?.setting_id===e.setting_id,n=I[1]?.setting_id===e.setting_id;if(t)L([I[1],null]);else if(n)L([I[0],null]);else if(!I[0])L([e,null]);else if(I[1]){if(I[0].type!==e.type)return;L([I[0],e])}else{if(I[0].type!==e.type)return;L([I[0],e])}}else C(e)},oe=e=>{if(I[0]?.setting_id===e.setting_id)return 0;if(I[1]?.setting_id===e.setting_id)return 1},se=async e=>{try{let t=await Z.getCloudSettingDetail(e.setting_id);k({type:e.type===`process`?`print`:e.type,name:e.name,base_id:t.base_id||`GFSA00`,setting:t.setting||{}}),C(null)}catch(e){console.error(`Failed to fetch preset details for duplication:`,e)}},H=async e=>{try{ee.removeQueries({queryKey:[`cloudSettingDetail`,e.setting_id]});let t=await Z.getCloudSettingDetail(e.setting_id);j({type:e.type===`process`?`print`:e.type,name:e.name,base_id:t.base_id||`GFSA00`,setting:t.setting||{},setting_id:e.setting_id}),C(null)}catch(e){console.error(`Failed to fetch preset details for editing:`,e)}},ce=()=>{u(`all`),f(`all`),m(`all`),g(`all`),v(`all`),x(`all`),c(``)},le=l!==`all`||d!==`all`||p!==`all`||h!==`all`||_!==`all`||b!==`all`||s!==``,ue=e.filament.length+e.printer.length+e.process.length;return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`space-y-4 mb-6`,children:[(0,G.jsxs)(`div`,{className:`flex flex-col sm:flex-row gap-3`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:s,onChange:e=>c(e.target.value),placeholder:o(`profiles.cloudView.searchPlaceholder`),className:`w-full pl-10 pr-4 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray-dark focus:border-bambu-green focus:outline-none`})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 max-[550px]:flex-wrap max-[550px]:items-center`,children:[(0,G.jsxs)(Q,{variant:P?`primary`:`secondary`,onClick:()=>{P?(F(!1),L([null,null])):F(!0)},children:[(0,G.jsx)(Dc,{className:`w-4 h-4`}),o(P?`common.cancel`:`profiles.presets.compare`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>D(!0),disabled:!a(`cloud:auth`),title:a(`cloud:auth`)?void 0:o(`profiles.cloudView.noTemplatesPermission`),children:[(0,G.jsx)(gu,{className:`w-4 h-4`}),o(`profiles.cloudView.templates`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:n,disabled:r||!a(`cloud:auth`),title:a(`cloud:auth`)?void 0:o(`profiles.cloudView.noRefreshPermission`),children:[(0,G.jsx)(Vl,{className:`w-4 h-4 ${r?`animate-spin`:``}`}),o(`profiles.cloudView.refresh`)]}),(0,G.jsxs)(Q,{onClick:()=>T(!0),disabled:!a(`cloud:auth`),title:a(`cloud:auth`)?void 0:o(`profiles.cloudView.noCreatePermission`),children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),o(`profiles.cloudView.newPreset`)]})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2`,children:[(0,G.jsx)(Cc,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(O5,{label:o(`profiles.cloudView.filters.type`),value:l,options:[{value:`all`,label:o(`profiles.cloudView.filters.all`),count:ue},{value:`filament`,label:o(`profiles.cloudView.filters.filament`),count:e.filament.length},{value:`printer`,label:o(`profiles.cloudView.filters.printer`),count:e.printer.length},{value:`process`,label:o(`profiles.cloudView.filters.process`),count:e.process.length}],onChange:e=>u(e)}),(0,G.jsx)(O5,{label:o(`profiles.cloudView.filters.owner`),value:d,options:[{value:`all`,label:o(`profiles.cloudView.filters.all`)},{value:`custom`,label:o(`profiles.cloudView.filters.myPresets`)},{value:`builtin`,label:o(`profiles.cloudView.filters.builtIn`)}],onChange:e=>f(e)}),ne.printers.length>0&&(0,G.jsx)(O5,{label:o(`profiles.cloudView.filters.printer`),value:p,options:[{value:`all`,label:o(`profiles.cloudView.filters.all`)},...ne.printers.map(e=>({value:e.id,label:e.name}))],onChange:m}),ne.nozzles.length>0&&(0,G.jsx)(O5,{label:o(`profiles.cloudView.filters.nozzle`),value:h,options:[{value:`all`,label:o(`profiles.cloudView.filters.all`)},...ne.nozzles.map(e=>({value:e,label:e}))],onChange:g}),ne.filaments.length>0&&(l===`all`||l===`filament`)&&(0,G.jsx)(O5,{label:o(`profiles.cloudView.filters.filament`),value:_,options:[{value:`all`,label:o(`profiles.cloudView.filters.all`)},...ne.filaments.map(e=>({value:e,label:e}))],onChange:v}),ne.layerHeights.length>0&&(l===`all`||l===`process`)&&(0,G.jsx)(O5,{label:o(`profiles.cloudView.filters.layer`),value:b,options:[{value:`all`,label:o(`profiles.cloudView.filters.all`)},...ne.layerHeights.map(e=>({value:e,label:e}))],onChange:x}),le&&(0,G.jsx)(`button`,{onClick:ce,className:`px-3 py-2 text-sm text-bambu-gray hover:text-white transition-colors`,children:o(`profiles.cloudView.clearFilters`)})]})]}),P&&(0,G.jsx)(`div`,{className:`mb-4 p-3 bg-blue-500/10 border border-blue-500/30 rounded-lg`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-4`,children:[(0,G.jsx)(Dc,{className:`w-5 h-5 text-blue-600 dark:text-blue-400`}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:o(`profiles.cloudView.compareMode`)}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:I[0]?o(`profiles.cloudView.selectAnotherPreset`,{type:I[0].type}):o(`profiles.cloudView.clickTwoPresets`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`px-2 py-1 text-sm rounded truncate max-w-[200px] ${I[0]?`bg-blue-500/30 text-blue-700 dark:text-blue-300`:`bg-bambu-dark text-bambu-gray`}`,children:I[0]?I[0].name:o(`profiles.cloudView.selectFirst`)}),(0,G.jsx)(zo,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`span`,{className:`px-2 py-1 text-sm rounded truncate max-w-[200px] ${I[1]?`bg-blue-500/30 text-blue-700 dark:text-blue-300`:`bg-bambu-dark text-bambu-gray`}`,children:I[1]?I[1].name:o(`profiles.cloudView.selectSecond`)})]}),I[0]&&I[1]&&(0,G.jsxs)(Q,{size:`sm`,onClick:async()=>{try{let[e,t]=await Promise.all([Z.getCloudSettingDetail(I[0].setting_id),Z.getCloudSettingDetail(I[1].setting_id)]);V([e.setting||{},t.setting||{}]),z(!0)}catch{}},children:[(0,G.jsx)(Dc,{className:`w-4 h-4`}),o(`profiles.cloudView.compareNow`)]})]})]})}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-4 mb-4 text-sm text-bambu-gray`,children:[t&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(js,{className:`w-3 h-3`}),o(`profiles.cloudView.lastSynced`),` `,sp(t.toISOString(),`system`,o)]}),(0,G.jsx)(`span`,{children:o(`profiles.cloudView.showingCount`,{showing:ie.length,total:ue})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`span`,{className:`w-1.5 h-1.5 rounded-full bg-bambu-green`}),(0,G.jsxs)(`span`,{children:[`= `,o(`profiles.presets.myPreset`)]})]})]}),ie.length===0?(0,G.jsxs)(`div`,{className:`text-center py-16`,children:[(0,G.jsx)(qc,{className:`w-12 h-12 text-bambu-gray-dark mx-auto mb-4`}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:o(`profiles.cloudView.noPresetsFound`)}),le&&(0,G.jsx)(`button`,{onClick:ce,className:`mt-2 text-sm text-bambu-green hover:text-bambu-green-light`,children:o(`profiles.cloudView.clearFilters`)})]}):(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-3 gap-6`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3 px-1`,children:[(0,G.jsx)(Xs,{className:`w-4 h-4 text-amber-600 dark:text-amber-400`}),(0,G.jsx)(`h3`,{className:`text-sm font-medium text-bambu-gray`,children:o(`profiles.cloudView.columns.filament`)}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray-dark`,children:[`(`,ie.filter(e=>e.type===`filament`).length,`)`]})]}),(0,G.jsxs)(`div`,{className:`space-y-1 max-h-[calc(100vh-320px)] overflow-y-auto pr-1`,children:[ie.filter(e=>e.type===`filament`).map(e=>(0,G.jsx)(k5,{setting:e,onClick:()=>ae(e),onDuplicate:()=>se(e),compareMode:P,isCompareSelected:oe(e)!==void 0,compareIndex:oe(e),compareDisabled:P&&!!I[0]&&I[0].type!==e.type,t:o},e.setting_id)),ie.filter(e=>e.type===`filament`).length===0&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-dark px-3 py-2`,children:o(`profiles.cloudView.noFilamentPresets`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3 px-1`,children:[(0,G.jsx)(tu,{className:`w-4 h-4 text-blue-600 dark:text-blue-400`}),(0,G.jsx)(`h3`,{className:`text-sm font-medium text-bambu-gray`,children:o(`profiles.cloudView.columns.process`)}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray-dark`,children:[`(`,ie.filter(e=>e.type===`process`).length,`)`]})]}),(0,G.jsxs)(`div`,{className:`space-y-1 max-h-[calc(100vh-320px)] overflow-y-auto pr-1`,children:[ie.filter(e=>e.type===`process`).map(e=>(0,G.jsx)(k5,{setting:e,onClick:()=>ae(e),onDuplicate:()=>se(e),compareMode:P,isCompareSelected:oe(e)!==void 0,compareIndex:oe(e),compareDisabled:P&&!!I[0]&&I[0].type!==e.type,t:o},e.setting_id)),ie.filter(e=>e.type===`process`).length===0&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-dark px-3 py-2`,children:o(`profiles.cloudView.noProcessPresets`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-3 px-1`,children:[(0,G.jsx)(Ll,{className:`w-4 h-4 text-purple-600 dark:text-purple-400`}),(0,G.jsx)(`h3`,{className:`text-sm font-medium text-bambu-gray`,children:o(`profiles.cloudView.columns.printer`)}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray-dark`,children:[`(`,ie.filter(e=>e.type===`printer`).length,`)`]})]}),(0,G.jsxs)(`div`,{className:`space-y-1 max-h-[calc(100vh-320px)] overflow-y-auto pr-1`,children:[ie.filter(e=>e.type===`printer`).map(e=>(0,G.jsx)(k5,{setting:e,onClick:()=>ae(e),onDuplicate:()=>se(e),compareMode:P,isCompareSelected:oe(e)!==void 0,compareIndex:oe(e),compareDisabled:P&&!!I[0]&&I[0].type!==e.type,t:o},e.setting_id)),ie.filter(e=>e.type===`printer`).length===0&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray-dark px-3 py-2`,children:o(`profiles.cloudView.noPrinterPresets`)})]})]})]}),S&&(0,G.jsx)(_Ke,{setting:S,onClose:()=>C(null),onDeleted:()=>C(null),onDuplicate:()=>se(S),onEdit:()=>H(S),hasPermission:a,t:o}),(w||O||A||M)&&(0,G.jsx)(SKe,{onClose:()=>{T(!1),k(null),j(null),N(null)},initialData:A||O||(M?{type:M.type,name:``,base_id:``,setting:M.setting}:void 0),allPresets:e,t:o}),E&&(0,G.jsx)(bKe,{onClose:()=>D(!1),onApply:e=>{N({type:e.type,setting:e.settings}),D(!1)},t:o}),R&&B&&I[0]&&I[1]&&(0,G.jsx)(xKe,{onClose:()=>{z(!1),V(null)},leftPreset:B[0],rightPreset:B[1],leftLabel:I[0].name,rightLabel:I[1].name,t:o})]})}function wKe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),{hasPermission:r}=jd(),[i,a]=(0,y.useState)(`cloud`),[o,s]=(0,y.useState)(),{data:c,isLoading:l}=K({queryKey:[`cloudStatus`],queryFn:Z.getCloudStatus}),{data:u=[]}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:d,isLoading:f,refetch:p,dataUpdatedAt:m}=K({queryKey:[`cloudSettings`],queryFn:()=>Z.getCloudSettings(),enabled:!!c?.is_authenticated,retry:!1,staleTime:1e3*60*5});(0,y.useEffect)(()=>{m&&s(new Date(m))},[m]);let h=q({mutationFn:Z.cloudLogout,onSuccess:()=>{t.invalidateQueries({queryKey:[`cloudStatus`]}),t.removeQueries({queryKey:[`cloudSettings`]}),n(e(`profiles.toast.loggedOut`))}});return l?(0,G.jsx)(`div`,{className:`p-4 md:p-8 flex items-center justify-center min-h-[400px]`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):(0,G.jsxs)(`div`,{className:`p-4 md:p-8`,children:[(0,G.jsxs)(`div`,{className:`mb-6`,children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(Ps,{className:`w-7 h-7 text-bambu-green`}),e(`profiles.title`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:e(`profiles.subtitle`)})]}),(0,G.jsxs)(`div`,{className:`flex border-b border-bambu-dark-tertiary mb-6`,children:[(0,G.jsxs)(`button`,{onClick:()=>a(`cloud`),className:`flex items-center gap-2 px-4 py-3 text-sm font-medium transition-colors border-b-2 -mb-px ${i===`cloud`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-white border-transparent`}`,children:[(0,G.jsx)(Ps,{className:`w-4 h-4`}),e(`profiles.tabs.bambuCloud`)]}),(0,G.jsxs)(`button`,{onClick:()=>a(`orca_cloud`),className:`flex items-center gap-2 px-4 py-3 text-sm font-medium transition-colors border-b-2 -mb-px ${i===`orca_cloud`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-white border-transparent`}`,children:[(0,G.jsx)(Ps,{className:`w-4 h-4`}),e(`profiles.tabs.orcaCloud`)]}),(0,G.jsxs)(`button`,{onClick:()=>a(`local`),className:`flex items-center gap-2 px-4 py-3 text-sm font-medium transition-colors border-b-2 -mb-px ${i===`local`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-white border-transparent`}`,children:[(0,G.jsx)(Nc,{className:`w-4 h-4`}),e(`profiles.tabs.local`)]}),(0,G.jsxs)(`button`,{onClick:()=>a(`kprofiles`),className:`flex items-center gap-2 px-4 py-3 text-sm font-medium transition-colors border-b-2 -mb-px ${i===`kprofiles`?`text-bambu-green border-bambu-green`:`text-bambu-gray hover:text-white border-transparent`}`,children:[(0,G.jsx)(wc,{className:`w-4 h-4`}),e(`profiles.tabs.kprofiles`)]})]}),i===`cloud`&&(0,G.jsxs)(G.Fragment,{children:[c?.is_authenticated&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-3 mb-6 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full bg-bambu-green animate-pulse`}),(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[e(`profiles.connectedAs`),` `,(0,G.jsx)(`span`,{className:`text-white`,children:c.email}),c.region&&(0,G.jsx)(`span`,{className:`ml-2 px-2 py-0.5 text-xs rounded bg-bambu-dark-tertiary text-bambu-gray`,children:c.region===`china`?e(`profiles.login.regionChina`):e(`profiles.login.regionGlobal`)})]})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>h.mutate(),disabled:h.isPending||!r(`cloud:auth`),title:r(`cloud:auth`)?void 0:e(`profiles.noLogoutPermission`),children:[(0,G.jsx)(rl,{className:`w-4 h-4`}),e(`profiles.logout`)]})]}),c?.sign_in_expired&&(0,G.jsxs)(`div`,{className:`flex items-start gap-3 p-3 mb-6 rounded-lg border border-yellow-500/40 bg-yellow-500/10`,children:[(0,G.jsx)(Iu,{className:`w-5 h-5 shrink-0 text-yellow-400 mt-0.5`}),(0,G.jsxs)(`div`,{className:`text-sm`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`profiles.signInExpiredTitle`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`profiles.signInExpiredBody`)})]})]}),c?.is_authenticated?f?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-16`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):d?(0,G.jsx)(CKe,{settings:d,lastSyncTime:o,onRefresh:()=>p(),isRefreshing:f,printers:u,hasPermission:r,t:e}):(0,G.jsxs)(`div`,{className:`text-center py-16`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray mb-4`,children:e(`profiles.failedToLoad`)}),(0,G.jsx)(Q,{onClick:()=>p(),children:e(`profiles.retry`)})]}):(0,G.jsx)(hKe,{onSuccess:()=>{t.invalidateQueries({queryKey:[`cloudStatus`]})},t:e})]}),i===`orca_cloud`&&(0,G.jsx)(pKe,{}),i===`local`&&(0,G.jsx)(cKe,{}),i===`kprofiles`&&(0,G.jsx)(rKe,{}),(0,G.jsx)(gKe,{})]})}function TKe(e,t){let n=(t||``).toUpperCase().replace(/[- ]/g,``),r=n.includes(`X1`),i=n.includes(`P1`),a=n.includes(`A1MINI`),o=n.includes(`A1`)&&!a,s=n.includes(`H2D`),c=n.includes(`H2C`),l=n.includes(`H2S`),u=s||c||l,d=n.includes(`P2S`),f=n.includes(`X2D`),p=d||f;switch(e){case`Lubricate Steel Rods`:return p?`https://wiki.bambulab.com/en/p2s/maintenance/lubricate-x-y-z-axis`:null;case`Clean Steel Rods`:return p?`https://wiki.bambulab.com/en/p2s/maintenance/lubricate-x-y-z-axis`:null;case`Lubricate Linear Rails`:return a?`https://wiki.bambulab.com/en/a1-mini/maintenance/lubricate-y-axis`:o?`https://wiki.bambulab.com/en/a1/maintenance/lubricate-y-axis`:u?`https://wiki.bambulab.com/en/h2/maintenance/x-axis-lubrication`:null;case`Clean Nozzle/Hotend`:return r||i?`https://wiki.bambulab.com/en/x1/troubleshooting/nozzle-clog`:a||o?`https://wiki.bambulab.com/en/a1-mini/troubleshooting/nozzle-clog`:u?`https://wiki.bambulab.com/en/h2/maintenance/nozzl-cold-pull-maintenance-and-cleaning`:p?`https://wiki.bambulab.com/en/p2s/maintenance/cold-pull-maintenance-hotend`:`https://wiki.bambulab.com/en/x1/troubleshooting/nozzle-clog`;case`Check Belt Tension`:return r?`https://wiki.bambulab.com/en/x1/maintenance/belt-tension`:i?`https://wiki.bambulab.com/en/p1/maintenance/p1p-maintenance`:a?`https://wiki.bambulab.com/en/a1-mini/maintenance/belt_tension`:o?`https://wiki.bambulab.com/en/a1/maintenance/belt_tension`:s?`https://wiki.bambulab.com/en/h2/maintenance/belt-tension`:c?`https://wiki.bambulab.com/en/h2c/maintenance/belt-tension`:l?`https://wiki.bambulab.com/en/h2s/maintenance/belt-tension`:p?`https://wiki.bambulab.com/en/p2s/maintenance/belt-tension`:`https://wiki.bambulab.com/en/x1/maintenance/belt-tension`;case`Clean Carbon Rods`:return r||i?`https://wiki.bambulab.com/en/general/carbon-rods-clearance`:null;case`Clean Linear Rails`:return a?`https://wiki.bambulab.com/en/a1-mini/maintenance/lubricate-y-axis`:o?`https://wiki.bambulab.com/en/a1/maintenance/lubricate-y-axis`:u?`https://wiki.bambulab.com/en/h2/maintenance/x-axis-lubrication`:null;case`Clean Build Plate`:return`https://wiki.bambulab.com/en/filament-acc/acc/pei-plate-clean-guide`;case`Check PTFE Tube`:return r||i?`https://wiki.bambulab.com/en/x1/maintenance/replace-ptfe-tube`:a||o?`https://wiki.bambulab.com/en/a1-mini/maintenance/ptfe-tube`:s?`https://wiki.bambulab.com/en/h2/maintenance/replace-ptfe-tube-on-h2d-printer`:l?`https://wiki.bambulab.com/en/h2s/maintenance/replace-ptfe-tube-on-h2s-printer`:c?`https://wiki.bambulab.com/en/h2/maintenance/replace-ptfe-tube-on-h2d-printer`:`https://wiki.bambulab.com/en/x1/maintenance/replace-ptfe-tube`;case`Replace HEPA Filter`:case`HEPA Filter`:case`Replace Carbon Filter`:case`Carbon Filter`:return u?`https://wiki.bambulab.com/en/h2/maintenance/replace-smoke-purifier-air-filte`:`https://wiki.bambulab.com/en/x1/maintenance/replace-carbon-filter`;case`Lubricate Left Nozzle Rail`:case`Left Nozzle Rail`:return u?`https://wiki.bambulab.com/en/h2/maintenance/x-axis-lubrication`:null;default:return null}}var j5={Droplet:Xs,Flame:mc,Ruler:Gl,Sparkles:gu,Square:yu,Cable:ts,Wrench:ed,Calendar:as,Timer:Mu,Cog:Rs,Fan:ac,Zap:rd,Wind:Qu,Thermometer:ju,Layers:qc,Box:Zo,Target:Eu,RefreshCw:Vl,Settings:nu,Filter:Cc,CircleDot:Cs};function M5(e){return e&&j5[e]||ed}function N5(e,t,n){if(t===`days`){if(e<1)return n?n(`common.today`):`Today`;if(e===1)return n?n(`maintenance.day`):`1 day`;if(e<7){let t=Math.round(e);return n?n(`maintenance.days`,{count:t}):`${t} days`}if(e<180){let t=Math.round(e/7);return t===1?n?n(`maintenance.week`):`1 week`:n?n(`maintenance.weeks`,{count:t}):`${t} weeks`}let t=Math.round(e/30);return t===1?n?n(`maintenance.month`):`1 month`:n?n(`maintenance.months`,{count:t}):`${t} months`}else{if(e<1)return`${Math.round(e*60)}m`;if(e<24)return`${e<10?e.toFixed(1):Math.round(e)}h`;let t=e/24;if(t<7)return`${t<2?t.toFixed(1):Math.round(t)}d`;let n=t/7;return n<12?`${n<2?n.toFixed(1):Math.round(n)}w`:`${Math.round(n/4)}mo`}}function P5(e,t,n){return t===`days`?e===1?n?n(`maintenance.day`):`1 day`:e===7?n?n(`maintenance.week`):`1 week`:e===14?n?n(`maintenance.weeks`,{count:2}):`2 weeks`:e===30?n?n(`maintenance.month`):`1 month`:e===60?n?n(`maintenance.months`,{count:2}):`2 months`:e===90?n?n(`maintenance.months`,{count:3}):`3 months`:e===180?n?n(`maintenance.months`,{count:6}):`6 months`:e===365?n?n(`maintenance.year`):`1 year`:n?n(`maintenance.days`,{count:e}):`${e} days`:`${e}h`}function EKe({item:e,onPerform:t,onToggle:n,hasPermission:r,t:i}){let a=M5(e.maintenance_type_icon),o=e.interval_type||`hours`,s=(()=>{if(o===`days`){let t=e.days_since_maintenance??0;return Math.max(0,Math.min(100,t/e.interval_hours*100))}return Math.max(0,Math.min(100,(e.interval_hours-e.hours_until_due)/e.interval_hours*100))})(),c=()=>e.enabled?e.is_due?`text-red-700 dark:text-red-400`:e.is_warning?`text-amber-700 dark:text-amber-400`:`text-bambu-green`:`text-bambu-gray`;return(0,G.jsx)(`div`,{className:`rounded-xl border p-4 transition-all ${e.enabled?e.is_due?`bg-red-500/5 border-red-500/20`:e.is_warning?`bg-amber-500/5 border-amber-500/20`:`bg-bambu-dark-secondary border-bambu-dark-tertiary`:`bg-bambu-dark-secondary/50`}`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3 max-[550px]:flex-wrap`,children:[(0,G.jsxs)(`div`,{className:`relative p-2.5 rounded-lg shrink-0 ${e.is_due?`bg-red-500/20`:e.is_warning?`bg-amber-500/20`:e.enabled?`bg-bambu-dark`:`bg-bambu-dark/50`}`,children:[(0,G.jsx)(a,{className:`w-5 h-5 ${c()}`}),e.enabled&&(e.is_due||e.is_warning)&&(0,G.jsx)(`span`,{className:`absolute -top-1 -right-1 w-2.5 h-2.5 rounded-full ${e.is_due?`bg-red-500`:`bg-amber-500`} animate-pulse`})]}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`h3`,{className:`font-medium truncate ${e.enabled?`text-white`:`text-bambu-gray`}`,children:e.maintenance_type_name}),o===`days`&&(0,G.jsx)(`span`,{title:i(`maintenance.timeBasedInterval`),children:(0,G.jsx)(as,{className:`w-3.5 h-3.5 text-bambu-gray shrink-0`})}),(()=>{let t=e.maintenance_type_wiki_url||TKe(e.maintenance_type_name,e.printer_model);return t?(0,G.jsx)(`a`,{href:t,target:`_blank`,rel:`noopener noreferrer`,className:`text-bambu-gray hover:text-bambu-green transition-colors shrink-0`,title:i(`maintenance.viewDocumentation`),onClick:e=>e.stopPropagation(),children:(0,G.jsx)(nc,{className:`w-3.5 h-3.5`})}):null})()]}),(0,G.jsx)(`div`,{className:`mt-2 mb-1.5`,children:(0,G.jsx)(`div`,{className:`w-full h-1.5 bg-bambu-dark rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full transition-all duration-500 ${e.enabled?e.is_due?`bg-red-500`:e.is_warning?`bg-amber-500`:`bg-bambu-green`:`bg-bambu-gray/30`}`,style:{width:`${s}%`}})})}),(0,G.jsxs)(`div`,{className:`text-xs flex items-center gap-1 ${c()}`,children:[e.is_due&&(0,G.jsx)(Iu,{className:`w-3 h-3`}),e.is_warning&&!e.is_due&&(0,G.jsx)(js,{className:`w-3 h-3`}),!e.is_due&&!e.is_warning&&e.enabled&&(0,G.jsx)(fs,{className:`w-3 h-3`}),(()=>{if(!e.enabled)return i(`common.disabled`);if(o===`days`){let t=e.days_until_due??0;return e.is_due?i(`maintenance.overdueBy`,{duration:N5(Math.abs(t),`days`,i)}):e.is_warning?i(`maintenance.dueIn`,{duration:N5(t,`days`,i)}):i(`maintenance.timeLeft`,{duration:N5(t,`days`,i)})}else return e.is_due?i(`maintenance.overdueBy`,{duration:N5(Math.abs(e.hours_until_due),`hours`,i)}):e.is_warning?i(`maintenance.dueIn`,{duration:N5(e.hours_until_due,`hours`,i)}):i(`maintenance.timeLeft`,{duration:N5(e.hours_until_due,`hours`,i)})})()]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 shrink-0 max-[550px]:w-full max-[550px]:justify-end max-[550px]:mt-1`,children:[(0,G.jsx)(`span`,{title:r(`maintenance:update`)?void 0:i(`maintenance.noPermissionUpdate`),children:(0,G.jsx)(hU,{checked:e.enabled,onChange:t=>n(e.id,t),disabled:!r(`maintenance:update`)})}),(0,G.jsxs)(Q,{size:`sm`,variant:e.is_due?`primary`:`secondary`,onClick:()=>t(e.id),disabled:!e.enabled||!r(`maintenance:update`),title:r(`maintenance:update`)?void 0:i(`maintenance.noPermissionPerform`),className:`!px-3`,children:[(0,G.jsx)(Ul,{className:`w-3.5 h-3.5`}),i(`common.reset`)]})]})]})})}function DKe({overview:e,onPerform:t,onToggle:n,onSetHours:r,hasPermission:i,t:a}){let[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(e.total_print_hours.toFixed(1)),f=[...e.maintenance_items].sort((e,t)=>e.is_due&&!t.is_due?-1:!e.is_due&&t.is_due?1:e.is_warning&&!t.is_warning?-1:!e.is_warning&&t.is_warning?1:e.maintenance_type_id-t.maintenance_type_id),p=f.find(e=>e.enabled&&(e.is_due||e.is_warning)),m=()=>{let t=parseFloat(u);!isNaN(t)&&t>=0&&(r(e.printer_id,t),l(!1))};return(0,G.jsxs)(Ld,{className:`overflow-hidden`,children:[(0,G.jsxs)(`div`,{className:`p-5`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-4`,children:[(0,G.jsx)(`h2`,{className:`text-xl font-semibold text-white`,children:e.printer_name}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[e.due_count>0&&(0,G.jsxs)(`span`,{className:`px-2.5 py-1 bg-red-100 text-red-700 dark:bg-red-500/20 dark:text-red-400 text-xs font-medium rounded-full flex items-center gap-1.5`,children:[(0,G.jsx)(Iu,{className:`w-3 h-3`}),a(`maintenance.overdueCount`,{count:e.due_count})]}),e.warning_count>0&&(0,G.jsxs)(`span`,{className:`px-2.5 py-1 bg-amber-100 text-amber-700 dark:bg-amber-500/20 dark:text-amber-400 text-xs font-medium rounded-full flex items-center gap-1.5`,children:[(0,G.jsx)(js,{className:`w-3 h-3`}),a(`maintenance.dueSoonCount`,{count:e.warning_count})]}),e.due_count===0&&e.warning_count===0&&(0,G.jsxs)(`span`,{className:`px-2.5 py-1 bg-bambu-green/20 text-bambu-green text-xs font-medium rounded-full flex items-center gap-1.5`,children:[(0,G.jsx)(fs,{className:`w-3 h-3`}),a(`maintenance.allGood`)]})]})]}),(0,G.jsxs)(`button`,{onClick:()=>s(!o),className:`flex items-center gap-1.5 px-3 py-1.5 text-sm text-bambu-gray hover:text-white hover:bg-bambu-dark rounded-lg transition-colors`,children:[o?(0,G.jsx)(gs,{className:`w-4 h-4`}):(0,G.jsx)(ps,{className:`w-4 h-4`}),a(o?`common.collapse`:`common.expand`)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-6 mt-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 bg-bambu-dark/50 rounded-lg`,children:(0,G.jsx)(Mu,{className:`w-4 h-4 text-bambu-gray`})}),c?(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,value:u,onChange:e=>d(e.target.value),onKeyDown:e=>{e.key===`Enter`&&m(),e.key===`Escape`&&l(!1)},className:`w-24 px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm`,min:`0`,step:`1`,autoFocus:!0}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:a(`common.hours`)}),(0,G.jsx)(Q,{size:`sm`,onClick:m,children:a(`common.save`)}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>l(!1),children:a(`common.cancel`)})]}):(0,G.jsxs)(`button`,{onClick:()=>{i(`maintenance:update`)&&(d(Math.round(e.total_print_hours).toString()),l(!0))},className:`group ${i(`maintenance:update`)?``:`cursor-not-allowed opacity-60`}`,title:i(`maintenance:update`)?void 0:a(`maintenance.noPermissionEditHours`),children:[(0,G.jsxs)(`div`,{className:`text-sm font-medium text-white ${i(`maintenance:update`)?`group-hover:text-bambu-green`:``} transition-colors flex items-center gap-1`,children:[Math.round(e.total_print_hours),` `,a(`common.hours`),(0,G.jsx)(Dl,{className:`w-3 h-3 text-bambu-gray ${i(`maintenance:update`)?`group-hover:text-bambu-green`:``}`})]}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray`,children:a(`maintenance.totalPrintTime`)})]})]}),(0,G.jsx)(`div`,{className:`w-px h-10 bg-bambu-dark-tertiary`}),p&&(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg ${p.is_due?`bg-red-500/20`:`bg-amber-500/20`}`,children:(0,G.jsx)(M5(p.maintenance_type_icon),{className:`w-4 h-4 ${p.is_due?`text-red-600 dark:text-red-400`:`text-amber-600 dark:text-amber-400`}`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`text-sm font-medium ${p.is_due?`text-red-700 dark:text-red-400`:`text-amber-700 dark:text-amber-400`}`,children:p.maintenance_type_name}),(0,G.jsx)(`div`,{className:`text-xs ${p.is_due?`text-red-700/80 dark:text-red-400/70`:`text-amber-700/80 dark:text-amber-400/70`}`,children:p.is_due?a(`common.overdue`):a(`maintenance.dueSoon`)})]})]})]})]}),o&&(0,G.jsx)(zd,{className:`pt-0 border-t border-bambu-dark-tertiary`,children:(0,G.jsx)(`div`,{className:`grid grid-cols-1 lg:grid-cols-2 gap-3 pt-4`,children:f.map(e=>(0,G.jsx)(EKe,{item:e,onPerform:t,onToggle:n,hasPermission:i,t:a},e.id))})})]})}function OKe({overview:e,types:t,onUpdateInterval:n,onAddType:r,onUpdateType:i,onDeleteType:a,onRestoreDefaults:o,isRestoringDefaults:s,onAssignType:c,onRemoveItem:l,hasPermission:u,t:d}){let[f,p]=(0,y.useState)(null),[m,h]=(0,y.useState)(``),[g,_]=(0,y.useState)(`hours`),[v,b]=(0,y.useState)(!1),[x,S]=(0,y.useState)(``),[C,w]=(0,y.useState)(`100`),[T,E]=(0,y.useState)(`hours`),[D,O]=(0,y.useState)(`Wrench`),[k,A]=(0,y.useState)(``),[j,M]=(0,y.useState)(new Set),[N,P]=(0,y.useState)(null),[F,I]=(0,y.useState)(null),L=(0,y.useMemo)(()=>e?e.map(e=>({id:e.printer_id,name:e.printer_name})):[],[e]),R=t=>e?e.filter(e=>e.maintenance_items.some(e=>e.maintenance_type_id===t)).map(e=>({printerId:e.printer_id,printerName:e.printer_name,itemId:e.maintenance_items.find(e=>e.maintenance_type_id===t)?.id})):[],z=t=>{if(!e)return[];let n=new Set(R(t).map(e=>e.printerId));return L.filter(e=>!n.has(e.id))},[B,V]=(0,y.useState)(null),[ee,te]=(0,y.useState)(``),[ne,re]=(0,y.useState)(``),[ie,ae]=(0,y.useState)(`hours`),[oe,se]=(0,y.useState)(`Wrench`),[H,ce]=(0,y.useState)(``),le=e=>{V(e),te(e.name),re(e.default_interval_hours.toString()),ae(e.interval_type||`hours`),se(e.icon||`Wrench`),ce(e.wiki_url||``)},ue=()=>{B&&ee.trim()&&parseFloat(ne)>0&&(i(B.id,{name:ee.trim(),default_interval_hours:parseFloat(ne),interval_type:ie,icon:oe,wiki_url:H.trim()||null}),V(null))},de=(e,t,r)=>{let i=parseFloat(m);!isNaN(i)&&i>0&&n(e,{custom_interval_hours:Math.abs(i-t)<.01?null:i,custom_interval_type:g===r?null:g}),p(null)},fe=e=>{e.preventDefault(),x.trim()&&parseFloat(C)>0&&j.size>0&&(r({name:x.trim(),default_interval_hours:parseFloat(C),interval_type:T,icon:D,wiki_url:k.trim()||null},Array.from(j)),S(``),w(`100`),E(`hours`),A(``),M(new Set),b(!1))},pe=e=>{M(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},me=e?.map(e=>({printerId:e.printer_id,printerName:e.printer_name,items:e.maintenance_items.sort((e,t)=>e.maintenance_type_id-t.maintenance_type_id)})).sort((e,t)=>e.printerName.localeCompare(t.printerName))||[],he=t.filter(e=>e.is_system),ge=t.filter(e=>!e.is_system);return(0,G.jsxs)(`div`,{className:`space-y-8`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:d(`maintenance.maintenanceTypes`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:d(`maintenance.maintenanceTypesDescription`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:o,disabled:!u(`maintenance:delete`)||s,title:u(`maintenance:delete`)?void 0:d(`maintenance.noPermissionDeleteTypes`),children:d(`maintenance.restoreDefaults`)}),(0,G.jsxs)(Q,{onClick:()=>b(!v),disabled:!u(`maintenance:create`),title:u(`maintenance:create`)?void 0:d(`maintenance.noPermissionEditTypes`),children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),d(`maintenance.addCustomType`)]})]})]}),v&&(0,G.jsx)(Ld,{className:`mb-6`,children:(0,G.jsx)(zd,{className:`py-4`,children:(0,G.jsxs)(`form`,{onSubmit:fe,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 lg:grid-cols-4 gap-4`,children:[(0,G.jsxs)(`div`,{className:`lg:col-span-2`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1.5`,children:d(`common.name`)}),(0,G.jsx)(`input`,{type:`text`,value:x,onChange:e=>S(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,placeholder:d(`maintenance.exampleName`),autoFocus:!0})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1.5`,children:d(`maintenance.intervalType`)}),(0,G.jsxs)(`select`,{value:T,onChange:e=>{E(e.target.value),e.target.value===`days`?w(`30`):w(`100`)},className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`hours`,children:d(`maintenance.printHours`)}),(0,G.jsx)(`option`,{value:`days`,children:d(`maintenance.calendarDays`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1.5`,children:d(`maintenance.intervalValue`,{type:T===`days`?d(`maintenance.calendarDays`).toLowerCase():d(`common.hours`)})}),(0,G.jsx)(`input`,{type:`number`,value:C,onChange:e=>w(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,min:`1`})]})]}),(0,G.jsx)(`div`,{className:`mt-4 flex items-end justify-between`,children:(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1.5`,children:d(`maintenance.icon`)}),(0,G.jsx)(`div`,{className:`flex gap-1`,children:Object.keys(j5).map(e=>{let t=j5[e];return(0,G.jsx)(`button`,{type:`button`,onClick:()=>O(e),className:`p-2 rounded-lg transition-colors ${D===e?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(t,{className:`w-4 h-4`})},e)})})]})}),(0,G.jsxs)(`div`,{className:`mt-4`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1.5`,children:d(`maintenance.documentationLink`)}),(0,G.jsx)(`input`,{type:`url`,value:k,onChange:e=>A(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,placeholder:`https://wiki.bambulab.com/...`})]}),(0,G.jsxs)(`div`,{className:`mt-4`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-bambu-gray mb-1.5`,children:d(`maintenance.assignToPrinters`)}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-2`,children:L.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>pe(e.id),className:`px-3 py-1.5 rounded-lg text-sm transition-colors ${j.has(e.id)?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white hover:bg-bambu-dark-tertiary`}`,children:e.name},e.id))}),j.size===0&&(0,G.jsx)(`p`,{className:`text-xs text-orange-700 dark:text-orange-400 mt-1`,children:d(`maintenance.selectAtLeastOnePrinter`)})]}),(0,G.jsxs)(`div`,{className:`mt-4 flex justify-end gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:()=>{b(!1),M(new Set)},children:d(`common.cancel`)}),(0,G.jsx)(Q,{type:`submit`,disabled:!x.trim()||j.size===0,children:d(`maintenance.addType`)})]})]})})}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 lg:grid-cols-3 gap-3`,children:[he.map(e=>{let t=M5(e.icon),n=e.interval_type||`hours`;return(0,G.jsx)(`div`,{className:`bg-bambu-dark-secondary rounded-xl p-4 border border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2.5 bg-bambu-dark rounded-lg`,children:(0,G.jsx)(t,{className:`w-5 h-5 text-bambu-gray`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-sm font-medium text-white truncate`,children:e.name}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray mt-0.5 flex items-center gap-1`,children:[n===`days`?(0,G.jsx)(as,{className:`w-3 h-3`}):(0,G.jsx)(Mu,{className:`w-3 h-3`}),P5(e.default_interval_hours,n,d)]})]}),(0,G.jsx)(`button`,{onClick:()=>{u(`maintenance:delete`)&&I(e)},disabled:!u(`maintenance:delete`),title:u(`maintenance:delete`)?void 0:d(`maintenance.noPermissionDeleteTypes`),className:`p-2 rounded-lg hover:bg-bambu-dark text-bambu-gray hover:text-red-600 dark:hover:text-red-400 transition-colors ${u(`maintenance:delete`)?``:`opacity-50 cursor-not-allowed`}`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})},e.id)}),ge.map(e=>{let t=M5(e.icon),n=e.interval_type||`hours`;if(B?.id===e.id)return(0,G.jsx)(`div`,{className:`bg-bambu-dark-secondary rounded-xl p-4 border border-bambu-green`,children:(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsx)(`input`,{type:`text`,value:ee,onChange:e=>te(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,placeholder:d(`common.name`),autoFocus:!0}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(`select`,{value:ie,onChange:e=>ae(e.target.value),className:`flex-1 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,children:[(0,G.jsx)(`option`,{value:`hours`,children:d(`maintenance.printHours`)}),(0,G.jsx)(`option`,{value:`days`,children:d(`maintenance.calendarDays`)})]}),(0,G.jsx)(`input`,{type:`number`,value:ne,onChange:e=>re(e.target.value),className:`w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,min:`1`})]}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1`,children:Object.keys(j5).map(e=>{let t=j5[e];return(0,G.jsx)(`button`,{type:`button`,onClick:()=>se(e),className:`p-1.5 rounded transition-colors ${oe===e?`bg-bambu-green text-white`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,children:(0,G.jsx)(t,{className:`w-3.5 h-3.5`})},e)})}),(0,G.jsx)(`input`,{type:`url`,value:H,onChange:e=>ce(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:border-bambu-green focus:outline-none`,placeholder:d(`maintenance.documentationLink`)}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Q,{size:`sm`,onClick:ue,disabled:!ee.trim(),children:d(`common.save`)}),(0,G.jsx)(Q,{size:`sm`,variant:`secondary`,onClick:()=>V(null),children:d(`common.cancel`)})]})]})},e.id);let r=R(e.id),i=z(e.id),o=N===e.id;return(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-xl p-4 border border-bambu-green/30`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2.5 bg-bambu-green/20 rounded-lg`,children:(0,G.jsx)(t,{className:`w-5 h-5 text-bambu-green`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-sm font-medium text-white truncate`,children:e.name}),(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 bg-bambu-green/20 text-bambu-green text-[10px] font-medium rounded`,children:d(`maintenance.custom`)})]}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray mt-0.5 flex items-center gap-1`,children:[n===`days`?(0,G.jsx)(as,{className:`w-3 h-3`}):(0,G.jsx)(Mu,{className:`w-3 h-3`}),P5(e.default_interval_hours,n,d)]})]}),(0,G.jsxs)(`button`,{onClick:()=>P(o?null:e.id),className:`px-2 py-1 rounded-lg border transition-colors flex items-center gap-1 ${r.length>0?`border-bambu-green/50 bg-bambu-green/10 text-bambu-green hover:bg-bambu-green/20`:`border-orange-300 bg-orange-50 text-orange-700 hover:bg-orange-100 dark:border-orange-400/50 dark:bg-orange-400/10 dark:text-orange-400 dark:hover:bg-orange-400/20`}`,title:d(`maintenance.printersAssignedClick`,{count:r.length}),children:[(0,G.jsx)(Ll,{className:`w-3 h-3`}),(0,G.jsx)(`span`,{className:`text-xs font-medium`,children:r.length}),(0,G.jsx)(ps,{className:`w-3 h-3 transition-transform ${o?`rotate-180`:``}`})]}),(0,G.jsx)(`button`,{onClick:()=>le(e),disabled:!u(`maintenance:update`),title:u(`maintenance:update`)?void 0:d(`maintenance.noPermissionEditTypes`),className:`p-2 rounded-lg hover:bg-bambu-dark text-bambu-gray hover:text-white transition-colors ${u(`maintenance:update`)?``:`opacity-50 cursor-not-allowed`}`,children:(0,G.jsx)(Dl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>{confirm(d(`maintenance.deleteTypeConfirm`,{name:e.name}))&&a(e.id)},disabled:!u(`maintenance:delete`),title:u(`maintenance:delete`)?void 0:d(`maintenance.noPermissionDeleteTypes`),className:`p-2 rounded-lg hover:bg-bambu-dark text-bambu-gray hover:text-red-600 dark:hover:text-red-400 transition-colors ${u(`maintenance:delete`)?``:`opacity-50 cursor-not-allowed`}`,children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]}),o&&(0,G.jsxs)(`div`,{className:`mt-3 pt-3 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:d(`maintenance.assignedToPrinters`)}),r.length===0?(0,G.jsx)(`p`,{className:`text-xs text-orange-700 dark:text-orange-400`,children:d(`maintenance.noPrintersAssigned`)}):(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1 mb-2`,children:r.map(e=>(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 px-2 py-1 bg-bambu-dark rounded text-xs text-white`,children:[e.printerName,(0,G.jsx)(`button`,{onClick:()=>e.itemId&&l(e.itemId),disabled:!u(`maintenance:delete`),title:u(`maintenance:delete`)?d(`maintenance.removeFromPrinter`):d(`maintenance.noPermissionRemovePrinter`),className:`ml-1 ${u(`maintenance:delete`)?`hover:text-red-600 dark:hover:text-red-400`:`opacity-50 cursor-not-allowed`}`,children:`×`})]},e.printerId))}),i.length>0&&(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-1`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray mr-1`,children:d(`maintenance.addPrinterShort`)}),i.map(t=>(0,G.jsxs)(`button`,{onClick:()=>c(t.id,e.id),disabled:!u(`maintenance:create`),title:u(`maintenance:create`)?void 0:d(`maintenance.noPermissionAssignPrinter`),className:`px-2 py-1 bg-bambu-dark rounded text-xs transition-colors ${u(`maintenance:create`)?`hover:bg-bambu-green/20 text-bambu-gray hover:text-bambu-green`:`opacity-50 cursor-not-allowed text-bambu-gray`}`,children:[`+ `,t.name]},t.id))]})]})]},e.id)})]})]}),me.length>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:d(`maintenance.intervalOverrides`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:d(`maintenance.intervalOverridesDescription`)})]}),(0,G.jsx)(`div`,{className:`space-y-4`,children:me.map(e=>(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`py-4`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white mb-3`,children:e.printerName}),(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 lg:grid-cols-3 gap-2`,children:e.items.map(e=>{let n=M5(e.maintenance_type_icon),r=t.find(t=>t.id===e.maintenance_type_id),i=r?.default_interval_hours||e.interval_hours,a=r?.interval_type||`hours`,o=e.interval_type||`hours`,s=f===e.id;return(0,G.jsxs)(`div`,{className:`flex items-center gap-2 p-2.5 bg-bambu-dark rounded-lg`,children:[(0,G.jsx)(n,{className:`w-4 h-4 text-bambu-gray shrink-0`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray flex-1 truncate`,children:e.maintenance_type_name}),s?(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[g===`days`?(0,G.jsx)(as,{className:`w-3.5 h-3.5 text-bambu-gray shrink-0`}):(0,G.jsx)(Mu,{className:`w-3.5 h-3.5 text-bambu-gray shrink-0`}),(0,G.jsxs)(`select`,{value:g,onChange:e=>_(e.target.value),className:`px-1.5 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-xs`,children:[(0,G.jsx)(`option`,{value:`hours`,children:d(`maintenance.printHours`)}),(0,G.jsx)(`option`,{value:`days`,children:d(`maintenance.calendarDays`)})]}),(0,G.jsx)(`input`,{type:`number`,value:m,onChange:e=>h(e.target.value),onKeyDown:t=>{t.key===`Enter`&&de(e.id,i,a),t.key===`Escape`&&p(null)},className:`w-16 px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-xs`,min:`1`}),(0,G.jsx)(Q,{size:`sm`,onClick:()=>de(e.id,i,a),children:`OK`})]}):(0,G.jsxs)(`button`,{onClick:()=>{u(`maintenance:update`)&&(p(e.id),h(e.interval_hours.toString()),_(o))},disabled:!u(`maintenance:update`),title:u(`maintenance:update`)?void 0:d(`maintenance.noPermissionEditIntervals`),className:`px-2 py-1 bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded text-xs font-medium text-white transition-colors flex items-center gap-1 ${u(`maintenance:update`)?`hover:bg-bambu-dark-secondary hover:border-bambu-green`:`opacity-50 cursor-not-allowed`}`,children:[o===`days`?(0,G.jsx)(as,{className:`w-3 h-3`}):(0,G.jsx)(Mu,{className:`w-3 h-3`}),P5(e.interval_hours,o,d),(0,G.jsx)(Dl,{className:`w-3 h-3 text-bambu-gray`})]})]},e.id)})})]})},e.printerId))})]}),me.length===0&&(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`text-center py-12`,children:[(0,G.jsx)(js,{className:`w-12 h-12 mx-auto mb-4 text-bambu-gray/30`}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:d(`common.noPrinters`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray/70 mt-1`,children:d(`maintenance.intervalOverridesDescription`)})]})}),F&&(0,G.jsx)(rf,{title:d(`maintenance.deleteSystemTypeTitle`),message:d(`maintenance.deleteSystemTypeMessage`,{name:F.name}),confirmText:d(`common.delete`),cancelText:d(`common.cancel`),variant:`danger`,cancelVariant:`primary`,cardClassName:`bg-red-950/70 border border-red-800/70`,onConfirm:()=>{a(F.id),I(null)},onCancel:()=>I(null)})]})}function kKe(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),{hasPermission:r}=jd(),[i,a]=(0,y.useState)(`status`),{data:o,isLoading:s}=K({queryKey:[`maintenanceOverview`],queryFn:Z.getMaintenanceOverview}),{data:c}=K({queryKey:[`maintenanceTypes`],queryFn:Z.getMaintenanceTypes}),l=q({mutationFn:({id:e,notes:t})=>Z.performMaintenance(e,t),onSuccess:()=>{t.invalidateQueries({queryKey:[`maintenanceOverview`]}),t.invalidateQueries({queryKey:[`maintenanceSummary`]}),n(e(`maintenance.maintenanceComplete`))},onError:e=>{n(e.message,`error`)}}),u=q({mutationFn:({id:e,data:t})=>Z.updateMaintenanceItem(e,t),onSuccess:()=>{t.invalidateQueries({queryKey:[`maintenanceOverview`]})},onError:e=>{n(e.message,`error`)}}),d=q({mutationFn:({id:e,data:t})=>Z.updateMaintenanceType(e,t),onSuccess:()=>{t.invalidateQueries({queryKey:[`maintenanceTypes`]}),t.invalidateQueries({queryKey:[`maintenanceOverview`]}),n(e(`maintenance.typeUpdated`))},onError:e=>{n(e.message,`error`)}}),f=q({mutationFn:Z.deleteMaintenanceType,onSuccess:()=>{t.invalidateQueries({queryKey:[`maintenanceTypes`]}),t.invalidateQueries({queryKey:[`maintenanceOverview`]}),n(e(`maintenance.typeDeleted`))},onError:e=>{n(e.message,`error`)}}),p=q({mutationFn:Z.restoreDefaultMaintenanceTypes,onSuccess:r=>{t.invalidateQueries({queryKey:[`maintenanceTypes`]}),t.invalidateQueries({queryKey:[`maintenanceOverview`]}),n(e(`maintenance.defaultsRestored`,{count:r.restored}))},onError:e=>{n(e.message,`error`)}}),m=q({mutationFn:({printerId:e,hours:t})=>Z.setPrinterHours(e,t),onSuccess:()=>{t.invalidateQueries({queryKey:[`maintenanceOverview`]}),t.invalidateQueries({queryKey:[`maintenanceSummary`]}),n(e(`maintenance.printHoursUpdated`))},onError:e=>{n(e.message,`error`)}}),h=q({mutationFn:({printerId:e,typeId:t})=>Z.assignMaintenanceType(e,t),onSuccess:()=>{t.invalidateQueries({queryKey:[`maintenanceOverview`]}),n(e(`maintenance.printerAssigned`))},onError:e=>{n(e.message,`error`)}}),g=q({mutationFn:Z.removeMaintenanceItem,onSuccess:()=>{t.invalidateQueries({queryKey:[`maintenanceOverview`]}),n(e(`maintenance.printerRemoved`))},onError:e=>{n(e.message,`error`)}}),_=e=>{l.mutate({id:e})},v=(e,t)=>{u.mutate({id:e,data:{enabled:t}})},b=(e,t)=>{m.mutate({printerId:e,hours:t})};if(s)return(0,G.jsx)(`div`,{className:`p-4 md:p-8 flex justify-center`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})});let x=o?.reduce((e,t)=>e+t.due_count,0)||0,S=o?.reduce((e,t)=>e+t.warning_count,0)||0;return(0,G.jsxs)(`div`,{className:`p-4 md:p-8`,children:[(0,G.jsxs)(`div`,{className:`mb-6`,children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(ed,{className:`w-7 h-7 text-bambu-green`}),e(`maintenance.title`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:i===`status`?(0,G.jsxs)(G.Fragment,{children:[x>0&&(0,G.jsx)(`span`,{className:`text-red-700 dark:text-red-400`,children:e(`maintenance.dueCount`,{count:x})}),x>0&&S>0&&` · `,S>0&&(0,G.jsx)(`span`,{className:`text-amber-700 dark:text-amber-400`,children:e(`maintenance.warningCount`,{count:S})}),x===0&&S===0&&(0,G.jsx)(`span`,{className:`text-bambu-green`,children:e(`maintenance.allOk`)})]}):e(`maintenance.configureSettings`)})]}),(0,G.jsxs)(`div`,{className:`flex gap-1 mb-6 border-b border-bambu-dark-tertiary`,children:[(0,G.jsx)(`button`,{onClick:()=>a(`status`),className:`px-4 py-2 text-sm font-medium border-b-2 -mb-px transition-colors ${i===`status`?`text-bambu-green border-bambu-green`:`text-bambu-gray border-transparent hover:text-white`}`,children:e(`maintenance.statusTab`)}),(0,G.jsx)(`button`,{onClick:()=>a(`settings`),className:`px-4 py-2 text-sm font-medium border-b-2 -mb-px transition-colors ${i===`settings`?`text-bambu-green border-bambu-green`:`text-bambu-gray border-transparent hover:text-white`}`,children:e(`maintenance.settingsTab`)})]}),i===`status`?(0,G.jsx)(`div`,{className:`space-y-6`,children:o&&o.length>0?[...o].sort((e,t)=>{let n=e.due_count*10+e.warning_count,r=t.due_count*10+t.warning_count;return n===r?e.printer_name.localeCompare(t.printer_name):r-n}).map(t=>(0,G.jsx)(DKe,{overview:t,onPerform:_,onToggle:v,onSetHours:b,hasPermission:r,t:e},t.printer_id)):(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`text-center py-16`,children:[(0,G.jsx)(ed,{className:`w-16 h-16 mx-auto mb-4 text-bambu-gray/30`}),(0,G.jsx)(`p`,{className:`text-lg font-medium text-white mb-2`,children:e(`common.noPrinters`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`maintenance.configureSettings`)})]})})}):(0,G.jsx)(OKe,{overview:o,types:c||[],onUpdateInterval:(e,t)=>u.mutate({id:e,data:t}),onAddType:async(r,i)=>{let a=await Z.createMaintenanceType(r);for(let e of i)await Z.assignMaintenanceType(e,a.id);t.invalidateQueries({queryKey:[`maintenanceTypes`]}),t.invalidateQueries({queryKey:[`maintenanceOverview`]}),n(e(`maintenance.typeUpdated`))},onUpdateType:(e,t)=>d.mutate({id:e,data:t}),onDeleteType:e=>f.mutate(e),onRestoreDefaults:()=>p.mutate(),isRestoringDefaults:p.isPending,onAssignType:(e,t)=>h.mutate({printerId:e,typeId:t}),onRemoveItem:e=>g.mutate(e),hasPermission:r,t:e})]})}var AKe=[`#ef4444`,`#f97316`,`#eab308`,`#22c55e`,`#06b6d4`,`#3b82f6`,`#8b5cf6`,`#ec4899`,`#6b7280`];function jKe({project:e,onClose:t,onSave:n,isLoading:r,currencySymbol:i,t:a}){let[o,s]=(0,y.useState)(e?.name||``),[c,l]=(0,y.useState)(e?.description||``),[u,d]=(0,y.useState)(e?.color||AKe[0]),[f,p]=(0,y.useState)(e?.target_count?.toString()||``),[m,h]=(0,y.useState)(e?.target_parts_count?.toString()||``),[g,_]=(0,y.useState)(e?.target_sets?.toString()||``),[v,b]=(0,y.useState)(e?.status||`active`),[x,S]=(0,y.useState)(e?.tags||``),[C,w]=(0,y.useState)(e?.due_date?.split(`T`)[0]||``),[T,E]=(0,y.useState)(e?.priority||`normal`),[D,O]=(0,y.useState)(e?.budget?.toString()||``),[k,A]=(0,y.useState)(e?.url||``),[j,M]=(0,y.useState)(null),[N,P]=(0,y.useState)(e?.parent_id??null),F=co(),{data:I}=K({queryKey:[`projects`,void 0],queryFn:()=>Z.getProjects()}),L=_Ae(I||[],e?.id),[R,z]=(0,y.useState)(e?.cover_image_filename||null),B=(0,y.useRef)(null),[V,ee]=(0,y.useState)(!1),[te,ne]=(0,y.useState)(0);return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg w-full max-w-md border border-bambu-dark-tertiary flex flex-col max-h-[calc(100vh-2rem)]`,children:[(0,G.jsx)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary flex-shrink-0`,children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:a(e?`projects.editProject`:`projects.newProject`)})}),(0,G.jsxs)(`form`,{onSubmit:t=>{t.preventDefault();let r=k.trim();if(r&&!/^https?:\/\//i.test(r)){M(a(`projects.urlInvalid`));return}M(null),n({name:o.trim(),description:c.trim()||void 0,color:u,target_count:f?parseInt(f,10):void 0,target_parts_count:m?parseInt(m,10):void 0,target_sets:e?g?parseInt(g,10):null:g?parseInt(g,10):void 0,tags:e?x.trim()||null:x.trim()||void 0,due_date:e?C||null:C||void 0,priority:T,budget:D.trim()?parseFloat(D):null,url:e?r||null:r||void 0,parent_id:e?N??0:N??void 0,...e&&{status:v}})},className:`flex flex-col flex-1 min-h-0`,children:[(0,G.jsxs)(`div`,{className:`p-4 space-y-4 overflow-y-auto flex-1`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`common.name`)}),(0,G.jsx)(`input`,{type:`text`,value:o,onChange:e=>s(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:a(`projects.namePlaceholder`),required:!0})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`common.description`)}),(0,G.jsx)(`textarea`,{value:c,onChange:e=>l(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green resize-none`,placeholder:a(`projects.descriptionPlaceholder`),rows:2})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projects.urlLabel`)}),(0,G.jsx)(`input`,{type:`url`,value:k,onChange:e=>{A(e.target.value),j&&M(null)},className:`w-full bg-bambu-dark border rounded px-3 py-2 text-white placeholder-bambu-gray focus:outline-none ${j?`border-red-500 focus:border-red-500`:`border-bambu-dark-tertiary focus:border-bambu-green`}`,placeholder:a(`projects.urlPlaceholder`),maxLength:2048}),j&&(0,G.jsx)(`p`,{className:`text-xs text-red-600 dark:text-red-400 mt-1`,children:j})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projects.parentLabel`)}),(0,G.jsxs)(`select`,{value:N??``,onChange:e=>P(e.target.value?parseInt(e.target.value,10):null),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white focus:outline-none focus:border-bambu-green`,children:[(0,G.jsx)(`option`,{value:``,children:a(`projects.parentNone`)}),L.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:a(`projects.parentHint`)})]}),e&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projects.coverImageLabel`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-20 h-20 rounded bg-bambu-dark border border-bambu-dark-tertiary overflow-hidden flex items-center justify-center flex-shrink-0`,children:R?(0,G.jsx)(`img`,{src:Z.getProjectCoverImageUrl(e.id,te),alt:a(`projects.coverImageAlt`),className:`w-full h-full object-cover`}):(0,G.jsx)(Vc,{className:`w-6 h-6 text-bambu-gray`})}),(0,G.jsxs)(`div`,{className:`flex flex-col gap-2`,children:[(0,G.jsx)(`input`,{ref:B,type:`file`,accept:`image/jpeg,image/png,image/gif,image/webp`,onChange:async t=>{let n=t.target.files?.[0];if(!(!n||!e)){ee(!0);try{z((await Z.uploadProjectCoverImage(e.id,n)).filename),ne(e=>e+1),F.invalidateQueries({queryKey:[`projects`]})}catch{}finally{ee(!1),B.current&&(B.current.value=``)}}},className:`hidden`}),(0,G.jsxs)(Q,{type:`button`,variant:`secondary`,onClick:()=>B.current?.click(),disabled:V,children:[V?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Bu,{className:`w-4 h-4 mr-1`}),a(R?`projects.coverImageReplace`:`projects.coverImageUpload`)]}),R&&(0,G.jsxs)(Q,{type:`button`,variant:`secondary`,onClick:async()=>{if(e){ee(!0);try{await Z.deleteProjectCoverImage(e.id),z(null),ne(e=>e+1),F.invalidateQueries({queryKey:[`projects`]})}finally{ee(!1)}}},disabled:V,children:[(0,G.jsx)(td,{className:`w-4 h-4 mr-1`}),a(`projects.coverImageRemove`)]})]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projects.color`)}),(0,G.jsx)(`div`,{className:`flex gap-2 flex-wrap`,children:AKe.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>d(e),className:`w-8 h-8 rounded-full transition-transform ${u===e?`ring-2 ring-white ring-offset-2 ring-offset-bambu-dark-secondary scale-110`:``}`,style:{backgroundColor:e}},e))})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projects.targetPlates`)}),(0,G.jsx)(`input`,{type:`number`,value:f,onChange:e=>p(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:a(`projects.targetPlatesPlaceholder`),min:`1`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:a(`projects.targetPlatesHelp`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projects.targetParts`)}),(0,G.jsx)(`input`,{type:`number`,value:m,onChange:e=>h(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:a(`projects.targetPartsPlaceholder`),min:`1`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:a(`projects.targetPartsHelp`)})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projects.targetSets`)}),(0,G.jsx)(`input`,{type:`number`,value:g,onChange:e=>_(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:a(`projects.targetSetsPlaceholder`),min:`1`}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:a(`projects.targetSetsHelp`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projects.tagsLabel`)}),(0,G.jsx)(`input`,{type:`text`,value:x,onChange:e=>S(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:a(`projects.tagsPlaceholder`)})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projects.dueDate`)}),(0,G.jsx)(`input`,{type:`date`,value:C,onChange:e=>w(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white focus:outline-none focus:border-bambu-green`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projects.priority`)}),(0,G.jsxs)(`select`,{value:T,onChange:e=>E(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white focus:outline-none focus:border-bambu-green`,children:[(0,G.jsx)(`option`,{value:`low`,children:a(`projects.priorityLow`)}),(0,G.jsx)(`option`,{value:`normal`,children:a(`projects.priorityNormal`)}),(0,G.jsx)(`option`,{value:`high`,children:a(`projects.priorityHigh`)}),(0,G.jsx)(`option`,{value:`urgent`,children:a(`projects.priorityUrgent`)})]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`projectDetail.cost.budget`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`span`,{className:`absolute left-3 top-1/2 -translate-y-1/2 text-bambu-gray pointer-events-none`,children:i}),(0,G.jsx)(`input`,{type:`number`,step:`0.01`,min:`0`,value:D,onChange:e=>O(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded pl-8 pr-3 py-2 text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:`0.00`})]})]}),e&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`common.status`)}),(0,G.jsxs)(`select`,{value:v,onChange:e=>b(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white focus:outline-none focus:border-bambu-green`,children:[(0,G.jsx)(`option`,{value:`active`,children:a(`projects.statusActive`)}),(0,G.jsx)(`option`,{value:`completed`,children:a(`projects.statusCompleted`)}),(0,G.jsx)(`option`,{value:`archived`,children:a(`projects.statusArchived`)})]})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 p-4 border-t border-bambu-dark-tertiary flex-shrink-0`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:t,children:a(`common.cancel`)}),(0,G.jsx)(Q,{type:`submit`,disabled:!o.trim()||r,children:r?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):a(e?`common.save`:`projects.create`)})]})]})]})})}function MKe({projectId:e,altText:t}){let n=(0,y.useRef)(null),[r,i]=(0,y.useState)(!1),[a,o]=(0,y.useState)(null);return(0,G.jsxs)(`div`,{ref:n,className:`relative flex-shrink-0`,onMouseEnter:()=>{if(!n.current)return;let e=n.current.getBoundingClientRect(),t=window.innerWidth,r=window.innerHeight,a=e.right+8;a+384>t-8&&(a=e.left-384-8);let s=e.top;s+384>r-8&&(s=r-384-8),s<8&&(s=8),o({left:a,top:s}),i(!0)},onMouseLeave:()=>i(!1),onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-lg overflow-hidden bg-bambu-dark border border-bambu-dark-tertiary`,children:(0,G.jsx)(`img`,{src:Z.getProjectCoverImageUrl(e),alt:t,className:`w-full h-full object-cover`,loading:`lazy`})}),r&&a&&(0,At.createPortal)((0,G.jsx)(`div`,{className:`fixed z-[100] w-96 h-96 rounded-lg overflow-hidden border border-bambu-dark-tertiary shadow-2xl bg-bambu-dark pointer-events-none`,style:{left:a.left,top:a.top},"aria-hidden":`true`,children:(0,G.jsx)(`img`,{src:Z.getProjectCoverImageUrl(e),alt:``,className:`w-full h-full object-contain`,loading:`lazy`})}),document.body)]})}function NKe({project:e,parentName:t,onClick:n,onEdit:r,onDelete:i,hasPermission:a,t:o}){let s=e.target_count?Math.round(e.archive_count/e.target_count*100):0,c=e.target_parts_count?Math.round(e.completed_count/e.target_parts_count*100):0,l=e.status===`completed`,u=e.status===`archived`,[d,f]=(0,y.useState)(!1),p=l?{icon:Ss,color:`text-bambu-green`,bg:`bg-bambu-green/10`}:u?{icon:Po,color:`text-bambu-gray`,bg:`bg-bambu-gray/10`}:e.queue_count>0?{icon:js,color:`text-blue-600 dark:text-blue-400`,bg:`bg-blue-50 dark:bg-blue-400/10`}:{icon:gc,color:`text-bambu-gray`,bg:`bg-bambu-gray/10`};return(0,G.jsxs)(`div`,{className:`group relative bg-gradient-to-br from-bambu-card to-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary hover:border-bambu-green/50 hover:shadow-lg hover:shadow-bambu-green/5 transition-all duration-300 cursor-pointer overflow-hidden`,onClick:n,children:[(0,G.jsx)(`div`,{className:`absolute top-0 left-0 w-1.5 h-full`,style:{backgroundColor:e.color||`#6b7280`,boxShadow:`0 0 12px ${e.color||`#6b7280`}40`}}),(0,G.jsxs)(`div`,{className:`p-5 pl-6`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between mb-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 min-w-0 flex-1`,children:[e.cover_image_filename?(0,G.jsx)(MKe,{projectId:e.id,altText:o(`projects.coverImageAlt`)}):(0,G.jsx)(`div`,{className:`p-2 rounded-lg ${p.bg} flex-shrink-0`,children:(0,G.jsx)(p.icon,{className:`w-5 h-5 ${p.color}`})}),(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-wrap`,children:[(0,G.jsx)(`h3`,{className:`font-semibold text-white truncate`,children:e.name}),e.url&&(0,G.jsx)(`a`,{href:e.url,target:`_blank`,rel:`noopener noreferrer`,onClick:e=>e.stopPropagation(),title:e.url,"aria-label":o(`projects.openExternalUrl`),className:`inline-flex items-center justify-center w-6 h-6 rounded bg-bambu-dark border border-bambu-dark-tertiary text-bambu-green hover:bg-bambu-green/10 hover:border-bambu-green transition-colors flex-shrink-0`,children:(0,G.jsx)(nc,{className:`w-3.5 h-3.5`})}),e.target_parts_count?(0,G.jsxs)(`span`,{className:`text-xs px-2 py-0.5 rounded-full whitespace-nowrap font-medium ${c>=100?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark text-bambu-gray`}`,children:[e.completed_count,`/`,e.target_parts_count,` `,o(`projects.parts`)]}):e.target_count?(0,G.jsxs)(`span`,{className:`text-xs px-2 py-0.5 rounded-full whitespace-nowrap font-medium ${s>=100?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark text-bambu-gray`}`,children:[e.archive_count,`/`,e.target_count,` `,o(`projects.plates`)]}):e.completed_count>0?(0,G.jsxs)(`span`,{className:`text-xs px-2 py-0.5 rounded-full whitespace-nowrap font-medium bg-bambu-dark text-bambu-gray`,children:[e.completed_count,` `,o(`projects.parts`)]}):null,l&&(0,G.jsx)(`span`,{className:`text-xs bg-bambu-green/20 text-bambu-green px-2 py-0.5 rounded-full whitespace-nowrap`,children:o(`projects.done`)}),u&&(0,G.jsx)(`span`,{className:`text-xs bg-bambu-gray/20 text-bambu-gray px-2 py-0.5 rounded-full whitespace-nowrap`,children:o(`projects.statusArchived`)}),e.child_count>0&&(0,G.jsxs)(`span`,{className:`text-xs bg-bambu-dark text-bambu-gray px-2 py-0.5 rounded-full whitespace-nowrap inline-flex items-center gap-1`,title:o(`projects.subProjectCount`,{count:e.child_count}),children:[(0,G.jsx)(bc,{className:`w-3 h-3`}),e.child_count]})]}),t&&(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-1 flex items-center gap-1`,children:[(0,G.jsx)(qc,{className:`w-3 h-3 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,children:o(`projects.partOf`,{name:t})})]}),e.description&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray/70 mt-1 line-clamp-1`,children:e.description}),e.archives&&e.archives.length>0&&(()=>{let t=e.archives.map(e=>e.filament_type).filter(Boolean).flatMap(e=>e.split(`,`).map(e=>e.trim())).filter(Boolean),n=[...new Set(t)],r=e.archives.map(e=>e.filament_color).filter(Boolean).flatMap(e=>e.split(`,`).map(e=>e.trim())).filter(e=>e.startsWith(`#`)||/^[0-9A-Fa-f]{6}$/.test(e)),i=[...new Set(r)];return n.length===0&&i.length===0?null:(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mt-1.5`,children:[n.slice(0,3).map(e=>(0,G.jsx)(`span`,{className:`text-[10px] px-1.5 py-0.5 bg-bambu-dark text-bambu-gray rounded`,children:e},e)),i.length>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-0.5`,children:[i.slice(0,5).map(e=>(0,G.jsx)(`div`,{className:`w-3 h-3 rounded-full border border-black/20`,style:{backgroundColor:e.startsWith(`#`)?e:`#${e}`},title:e},e)),i.length>5&&(0,G.jsxs)(`span`,{className:`text-[10px] text-bambu-gray ml-0.5`,children:[`+`,i.length-5]})]})]})})()]})]}),(0,G.jsxs)(`div`,{className:`relative`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(`button`,{className:`p-1.5 rounded-lg hover:bg-bambu-dark text-bambu-gray hover:text-white transition-colors can-hover:opacity-0 group-hover:opacity-100 focus-visible:opacity-100`,onClick:()=>f(!d),children:(0,G.jsx)(Qs,{className:`w-4 h-4`})}),d&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-10`,onClick:()=>f(!1)}),(0,G.jsxs)(`div`,{className:`absolute right-0 top-8 z-20 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl py-1 min-w-[120px]`,children:[(0,G.jsxs)(`button`,{className:`w-full px-3 py-2 text-left text-sm flex items-center gap-2 ${a(`projects:update`)?`text-white hover:bg-bambu-dark`:`text-bambu-gray cursor-not-allowed`}`,onClick:()=>{a(`projects:update`)&&(r(),f(!1))},disabled:!a(`projects:update`),title:a(`projects:update`)?void 0:o(`projects.noEditPermission`),children:[(0,G.jsx)(Dl,{className:`w-4 h-4`}),o(`common.edit`)]}),(0,G.jsxs)(`button`,{className:`w-full px-3 py-2 text-left text-sm flex items-center gap-2 ${a(`projects:delete`)?`text-red-600 dark:text-red-400 hover:bg-bambu-dark`:`text-bambu-gray cursor-not-allowed`}`,onClick:()=>{a(`projects:delete`)&&(i(),f(!1))},disabled:!a(`projects:delete`),title:a(`projects:delete`)?void 0:o(`projects.noDeletePermission`),children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),o(`common.delete`)]})]})]})]})]}),(0,G.jsx)(`div`,{className:`mb-4`,children:e.target_count||e.target_parts_count?(0,G.jsxs)(`div`,{className:`space-y-3`,children:[e.target_count&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-xs mb-1`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:o(`projects.plates`)}),(0,G.jsxs)(`span`,{className:s>=100?`text-bambu-green font-medium`:`text-white`,children:[e.archive_count,` / `,e.target_count]})]}),(0,G.jsx)(`div`,{className:`h-2 bg-bambu-dark/80 rounded-full overflow-hidden backdrop-blur-sm`,children:(0,G.jsx)(`div`,{className:`h-full transition-all duration-500 ease-out rounded-full relative`,style:{width:`${Math.min(s,100)}%`,background:s>=100?`linear-gradient(90deg, #22c55e, #4ade80)`:`linear-gradient(90deg, ${e.color||`#6b7280`}, ${e.color||`#6b7280`}cc)`,boxShadow:`0 0 8px ${s>=100?`#22c55e`:e.color||`#6b7280`}60`}})})]}),e.target_parts_count&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-xs mb-1`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:o(`projects.parts`)}),(0,G.jsxs)(`span`,{className:c>=100?`text-bambu-green font-medium`:`text-white`,children:[e.completed_count,` / `,e.target_parts_count]})]}),(0,G.jsx)(`div`,{className:`h-2 bg-bambu-dark/80 rounded-full overflow-hidden backdrop-blur-sm`,children:(0,G.jsx)(`div`,{className:`h-full transition-all duration-500 ease-out rounded-full relative`,style:{width:`${Math.min(c,100)}%`,background:c>=100?`linear-gradient(90deg, #22c55e, #4ade80)`:`linear-gradient(90deg, ${e.color||`#6b7280`}, ${e.color||`#6b7280`}cc)`,boxShadow:`0 0 8px ${c>=100?`#22c55e`:e.color||`#6b7280`}60`}})})]}),e.failed_count>0&&(0,G.jsxs)(`div`,{className:`text-xs text-red-600 dark:text-red-400`,children:[e.failed_count,` `,o(`projects.failed`)]})]}):e.completed_count>0||e.failed_count>0?(0,G.jsxs)(`div`,{className:`flex items-center gap-4 text-xs`,children:[e.completed_count>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-bambu-gray`,children:[(0,G.jsx)(Po,{className:`w-3.5 h-3.5`}),(0,G.jsxs)(`span`,{children:[e.completed_count,` `,o(`projects.completed`)]})]}),e.failed_count>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-red-600 dark:text-red-400`,children:[(0,G.jsx)(Iu,{className:`w-3.5 h-3.5`}),(0,G.jsxs)(`span`,{children:[e.failed_count,` `,o(`projects.failed`)]})]}),e.queue_count>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-blue-600 dark:text-blue-400`,children:[(0,G.jsx)(js,{className:`w-3.5 h-3.5`}),(0,G.jsxs)(`span`,{children:[e.queue_count,` `,o(`projects.inQueue`)]})]})]}):(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray/60 italic`,children:o(`projects.noPrintsYet`)})}),e.archives&&e.archives.length>0&&(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsx)(`div`,{className:`grid grid-cols-4 gap-1.5`,children:e.archives.slice(0,4).map(e=>(0,G.jsxs)(`div`,{className:`relative aspect-square rounded-lg bg-bambu-dark overflow-hidden border border-bambu-dark-tertiary`,title:e.print_name||`Unknown`,children:[e.thumbnail_path?(0,G.jsx)(`img`,{src:Z.getArchiveThumbnail(e.id),alt:e.print_name||``,className:`w-full h-full object-cover`}):(0,G.jsx)(`div`,{className:`w-full h-full flex items-center justify-center text-bambu-gray/50`,children:(0,G.jsx)(Sl,{className:`w-6 h-6`})}),e.status===`failed`&&(0,G.jsx)(`div`,{className:`absolute inset-0 bg-red-500/40 flex items-center justify-center`,children:(0,G.jsx)(Iu,{className:`w-4 h-4 text-white`})})]},e.id))}),e.archive_count>4&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1.5 text-center`,children:o(`common.more`,{count:e.archive_count-4})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between pt-3 border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-4 text-xs text-bambu-gray`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,title:o(`projects.printJobs`),children:[(0,G.jsx)(qc,{className:`w-3.5 h-3.5 text-blue-600 dark:text-blue-400`}),(0,G.jsxs)(`span`,{children:[e.archive_count,` `,o(`projects.plates`)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,title:o(`projects.partsPrinted`),children:[(0,G.jsx)(Sl,{className:`w-3.5 h-3.5 text-bambu-green`}),(0,G.jsxs)(`span`,{children:[e.completed_count,` `,o(`projects.parts`)]})]}),e.failed_count>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-red-600 dark:text-red-400`,title:o(`projects.failedParts`),children:[(0,G.jsx)(Iu,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`span`,{children:e.failed_count})]}),e.queue_count>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-yellow-600 dark:text-yellow-400`,title:o(`projects.inQueue`),children:[(0,G.jsx)(Qc,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`span`,{children:e.queue_count})]})]}),(0,G.jsx)(ms,{className:`w-4 h-4 text-bambu-gray/50 group-hover:text-bambu-gray transition-colors`})]})]})]})}function PKe(){let{t:e}=U(),t=or(),n=co(),{showToast:r}=Gd(),{hasPermission:i}=jd(),[a,o]=(0,y.useState)(!1),[s,c]=(0,y.useState)(),[l,u]=(0,y.useState)(`active`),[d,f]=(0,y.useState)(null),[p,m]=(0,y.useState)(()=>localStorage.getItem(`projects-collapse-subprojects`)===`true`),[h,g]=(0,y.useState)({}),_=()=>{let e=!p;m(e),g({}),localStorage.setItem(`projects-collapse-subprojects`,String(e))},{data:v}=K({queryKey:[`settings`],queryFn:Z.getSettings}),b=Pf(v?.currency||`USD`),{data:x,isLoading:S}=K({queryKey:[`projects`,l===`all`?void 0:l],queryFn:()=>Z.getProjects(l===`all`?void 0:l)}),{data:C}=K({queryKey:[`projects`,void 0],queryFn:()=>Z.getProjects()}),w=new Map((C||[]).map(e=>[e.id,e.name])),T=x||[],E=new Set(T.map(e=>e.id)),D=new Map;for(let e of T)if(e.parent_id!==null&&E.has(e.parent_id)){let t=D.get(e.parent_id)||[];t.push(e),D.set(e.parent_id,t)}let O=new Set,k=e=>{if(!O.has(e)){O.add(e);for(let t of D.get(e)||[])k(t.id)}},A=[];for(let e of T)e.parent_id!==null&&E.has(e.parent_id)||(A.push(e),k(e.id));for(let e of T)O.has(e.id)||(A.push(e),k(e.id));let j=(t,n,r)=>{let a=(0,G.jsx)(NKe,{project:t,parentName:n===0&&t.parent_id!==null?w.get(t.parent_id):void 0,onClick:()=>ee(t),onEdit:()=>V(t),onDelete:()=>te(t.id),hasPermission:i,t:e}),o=new Set(r).add(t.id),s=(D.get(t.id)||[]).filter(e=>!o.has(e.id));if(s.length===0)return(0,G.jsx)(`div`,{children:a},t.id);let c=h[t.id]??!p;return(0,G.jsxs)(`div`,{className:c?`col-span-full space-y-4`:`space-y-4`,children:[a,(0,G.jsxs)(`div`,{className:`ml-4 md:ml-8 pl-4 md:pl-6 border-l-2 rounded-l space-y-4`,style:{borderColor:t.color||`#6b7280`},children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>g(e=>({...e,[t.id]:!c})),"aria-expanded":c,title:e(c?`projects.collapseSubProjects`:`projects.expandSubProjects`),className:`text-xs uppercase tracking-wide text-bambu-gray hover:text-white transition-colors flex items-center gap-1.5 max-w-full min-w-0`,children:[c?(0,G.jsx)(ps,{className:`w-3.5 h-3.5 flex-shrink-0`}):(0,G.jsx)(ms,{className:`w-3.5 h-3.5 flex-shrink-0`}),(0,G.jsx)(bc,{className:`w-3.5 h-3.5 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,children:e(`projects.subProjectsOf`,{name:t.name})}),(0,G.jsx)(`span`,{className:`px-1.5 py-0.5 rounded-full bg-bambu-dark normal-case tracking-normal flex-shrink-0`,children:s.length})]}),c&&(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-8`,children:s.map(e=>j(e,n+1,o))})]})]},t.id)},M=q({mutationFn:e=>Z.createProject(e),onSuccess:()=>{n.invalidateQueries({queryKey:[`projects`]}),o(!1),r(e(`projects.toast.created`),`success`)},onError:e=>{r(e.message,`error`)}}),N=q({mutationFn:({id:e,data:t})=>Z.updateProject(e,t),onSuccess:()=>{n.invalidateQueries({queryKey:[`projects`]}),o(!1),c(void 0),r(e(`projects.toast.updated`),`success`)},onError:e=>{r(e.message,`error`)}}),P=q({mutationFn:e=>Z.deleteProject(e),onSuccess:()=>{f(null),r(e(`projects.toast.deleted`),`success`),setTimeout(()=>window.location.reload(),100)},onError:e=>{f(null),r(e.message,`error`)}}),F=q({mutationFn:e=>Z.importProject(e),onSuccess:()=>{n.invalidateQueries({queryKey:[`projects`]}),r(e(`projects.toast.imported`),`success`)},onError:e=>{r(e.message,`error`)}}),I=(0,y.useRef)(null),L=async()=>{try{let t=await Z.getProjects(),n=await Promise.all(t.map(async e=>await Z.exportProjectJson(e.id))),i=new Blob([JSON.stringify(n,null,2)],{type:`application/json`}),a=URL.createObjectURL(i),o=document.createElement(`a`);o.href=a,o.download=`bambuddy_projects_${new Date().toISOString().split(`T`)[0]}.json`,o.click(),URL.revokeObjectURL(a),r(e(`projects.toast.exported`),`success`)}catch(e){r(e.message,`error`)}},R=()=>{I.current?.click()},z=async t=>{let i=t.target.files?.[0];if(i){try{if(i.name.toLowerCase().endsWith(`.zip`))await Z.importProjectFile(i),n.invalidateQueries({queryKey:[`projects`]}),r(e(`projects.toast.imported`),`success`);else{let t=await i.text(),n=JSON.parse(t),a=Array.isArray(n)?n:[n];for(let e of a)await F.mutateAsync(e);a.length>1&&r(e(`projects.toast.multipleImported`,{count:a.length}),`success`)}}catch(t){r(`${e(`projects.toast.importFailed`)}: ${t.message}`,`error`)}t.target.value=``}},B=e=>{s?N.mutate({id:s.id,data:e}):M.mutate(e)},V=e=>{c(e),o(!0)},ee=e=>{t(`/projects/${e.id}`)},te=e=>{f(e)},ne=()=>{d!==null&&P.mutate(d)},re=C?.reduce((e,t)=>(e[t.status]=(e[t.status]||0)+1,e.all=(e.all||0)+1,e),{})||{};return(0,G.jsxs)(`div`,{className:`p-4 md:p-8 space-y-8`,children:[(0,G.jsx)(`input`,{ref:I,type:`file`,accept:`.json,.zip`,onChange:z,className:`hidden`}),(0,G.jsxs)(`div`,{className:`flex flex-col sm:flex-row sm:items-center justify-between gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(gc,{className:`w-7 h-7 text-bambu-green`}),e(`projects.title`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:e(`projects.subtitle`)})]}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:R,disabled:!i(`projects:create`),title:i(`projects:create`)?e(`projects.importProject`):e(`projects.noImportPermission`),children:[(0,G.jsx)(Bu,{className:`w-4 h-4 mr-2`}),e(`projects.import`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:L,disabled:!i(`projects:read`),title:i(`projects:read`)?e(`projects.exportAll`):e(`projects.noExportPermission`),children:[(0,G.jsx)(Ys,{className:`w-4 h-4 mr-2`}),e(`projects.export`)]}),(0,G.jsxs)(Q,{onClick:()=>o(!0),className:`sm:w-auto w-full`,disabled:!i(`projects:create`),title:i(`projects:create`)?void 0:e(`projects.noCreatePermission`),children:[(0,G.jsx)(Pl,{className:`w-4 h-4 mr-2`}),e(`projects.newProject`)]})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`flex gap-1 p-1 bg-bambu-dark rounded-xl w-fit`,children:[{key:`active`,label:e(`projects.statusActive`),icon:js},{key:`completed`,label:e(`projects.statusCompleted`),icon:Ss},{key:`archived`,label:e(`projects.statusArchived`),icon:Po},{key:`all`,label:e(`common.all`),icon:gc}].map(({key:e,label:t,icon:n})=>(0,G.jsxs)(`button`,{onClick:()=>u(e),className:`flex items-center gap-2 px-4 py-2 text-sm rounded-lg transition-all ${l===e?`bg-bambu-card text-white shadow-sm`:`text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(n,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{children:t}),re[e]>0&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded-full ${l===e?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark-tertiary`}`,children:re[e]})]},e))}),D.size>0&&(0,G.jsxs)(`button`,{type:`button`,onClick:_,"aria-pressed":p,title:e(p?`projects.expandSubProjects`:`projects.collapseSubProjects`),className:`flex items-center gap-2 px-3 py-1.5 text-sm rounded-lg transition-colors ${p?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:text-white hover:bg-bambu-dark`}`,children:[(0,G.jsx)(bc,{className:`w-4 h-4`}),e(`common.collapse`)]})]}),S?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-20`,children:(0,G.jsxs)(`div`,{className:`flex flex-col items-center gap-3`,children:[(0,G.jsx)(Y,{className:`w-8 h-8 animate-spin text-bambu-green`}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`projects.loading`)})]})}):x?.length===0?(0,G.jsxs)(`div`,{className:`flex flex-col items-center justify-center py-20 px-4`,children:[(0,G.jsx)(`div`,{className:`p-4 bg-bambu-dark rounded-2xl mb-4`,children:(0,G.jsx)(gc,{className:`w-12 h-12 text-bambu-gray/50`})}),(0,G.jsx)(`h3`,{className:`text-lg font-medium text-white mb-2`,children:l===`all`?e(`projects.noProjects`):e(`projects.noProjectsFiltered`,{status:l})}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-center max-w-md mb-6`,children:l===`all`?e(`projects.createFirst`):e(`projects.noProjectsFilteredHelp`,{status:l})}),l===`all`&&(0,G.jsxs)(Q,{onClick:()=>o(!0),disabled:!i(`projects:create`),title:i(`projects:create`)?void 0:e(`projects.noCreatePermission`),children:[(0,G.jsx)(Pl,{className:`w-4 h-4 mr-2`}),e(`projects.createFirstButton`)]})]}):(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 xl:grid-cols-3 gap-8`,children:A.map(e=>j(e,0,new Set))}),d!==null&&(0,G.jsx)(rf,{title:e(`projects.deleteProject`),message:e(`projects.deleteConfirm`),confirmText:e(`projects.deleteProject`),variant:`danger`,onConfirm:ne,onCancel:()=>f(null)}),a&&(0,G.jsx)(jKe,{project:s,onClose:()=>{o(!1),c(void 0)},onSave:B,isLoading:M.isPending||N.isPending,currencySymbol:b,t:e})]})}function F5(e){let t=(e.file_type||``).toLowerCase();if(t===`gcode`||t===`gcode.3mf`)return!0;let n=(e.filename||``).toLowerCase();return n.endsWith(`.gcode`)||n.endsWith(`.gcode.3mf`)}function I5(e,t,n){return F5(e)?!1:t?fAe(e.filename):dAe(e.filename,n)}function L5(e){return e>=1e3?`${(e/1e3).toFixed(2)}kg`:`${Math.round(e)}g`}function FKe({status:e,t}){let n={active:`bg-bambu-green/20 text-bambu-green`,completed:`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`,archived:`bg-bambu-gray/20 text-bambu-gray`},r=n[e]||n.active,i={active:t(`projectDetail.status.active`),completed:t(`projectDetail.status.completed`),archived:t(`projectDetail.status.archived`)};return(0,G.jsx)(`span`,{className:`px-2 py-1 rounded text-sm font-medium ${r}`,children:i[e]||e.charAt(0).toUpperCase()+e.slice(1)})}function IKe({icon:e,label:t,value:n,subValue:r,hint:i,color:a=`text-bambu-gray`}){return(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`p-4`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,title:i,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg bg-bambu-dark ${a}`,children:(0,G.jsx)(e,{className:`w-5 h-5`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:t}),(0,G.jsx)(`p`,{className:`text-xl font-semibold text-white`,children:n}),r&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/70`,children:r})]})]})})})}function LKe({archives:e,t}){return e.length===0?(0,G.jsxs)(`div`,{className:`text-center py-8 text-bambu-gray`,children:[(0,G.jsx)(Sl,{className:`w-12 h-12 mx-auto mb-2 opacity-50`}),(0,G.jsx)(`p`,{children:t(`projectDetail.noPrints`)})]}):(0,G.jsx)(`div`,{className:`grid grid-cols-2 sm:grid-cols-3 md:grid-cols-4 lg:grid-cols-5 xl:grid-cols-6 gap-3`,children:e.map(e=>(0,G.jsxs)(Ai,{to:`/archives?search=${encodeURIComponent(e.print_name||``)}`,className:`group relative aspect-square rounded-lg bg-bambu-dark border border-bambu-dark-tertiary overflow-hidden hover:border-bambu-green transition-colors`,children:[e.thumbnail_path?(0,G.jsx)(`img`,{src:Z.getArchiveThumbnail(e.id),alt:e.print_name||`Print`,className:`w-full h-full object-cover`}):(0,G.jsx)(`div`,{className:`w-full h-full flex items-center justify-center text-bambu-gray`,children:(0,G.jsx)(Sl,{className:`w-8 h-8`})}),e.status===`failed`&&(0,G.jsx)(`div`,{className:`absolute inset-0 bg-red-500/30 flex items-center justify-center`,children:(0,G.jsx)(Ds,{className:`w-8 h-8 text-white`})}),e.status===`completed`&&(0,G.jsx)(`div`,{className:`absolute top-1 right-1`,children:(0,G.jsx)(xs,{className:`w-4 h-4 text-bambu-green`})}),(0,G.jsx)(`div`,{className:`absolute inset-x-0 bottom-0 bg-gradient-to-t from-black/80 to-transparent p-2 opacity-0 group-hover:opacity-100 transition-opacity`,children:(0,G.jsx)(`p`,{className:`text-xs text-white truncate`,children:e.print_name||`Unknown`})})]},e.id))})}function RKe({priority:e,t}){let n={low:{color:`bg-gray-500/20 text-gray-400`,label:t(`projectDetail.priority.low`)},normal:{color:`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`,label:t(`projectDetail.priority.normal`)},high:{color:`bg-orange-100 dark:bg-orange-500/20 text-orange-700 dark:text-orange-400`,label:t(`projectDetail.priority.high`)},urgent:{color:`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`,label:t(`projectDetail.priority.urgent`)}},{color:r,label:i}=n[e]||n.normal;return(0,G.jsxs)(`span`,{className:`px-2 py-1 rounded text-xs font-medium flex items-center gap-1 ${r}`,children:[e===`urgent`&&(0,G.jsx)(Iu,{className:`w-3 h-3`}),i]})}function R5(e,t){if(!e)return null;let n=ep(e);if(!n)return null;let r=new Date,i=Math.ceil((n.getTime()-r.getTime())/(1e3*60*60*24));return i<0?{color:`text-red-700 dark:text-red-400`,label:t(`projectDetail.dueDate.overdue`)}:i===0?{color:`text-orange-700 dark:text-orange-400`,label:t(`projectDetail.dueDate.today`)}:i<=3?{color:`text-yellow-700 dark:text-yellow-400`,label:t(`projectDetail.dueDate.daysLeft`,{count:i})}:{color:`text-bambu-gray`,label:t(`projectDetail.dueDate.daysLeft`,{count:i})}}function zKe(){let{id:e}=dr(),t=or(),{t:n}=U(),r=co(),{showToast:i}=Gd(),{hasPermission:a}=jd(),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(``),[f,p]=(0,y.useState)(null),m=parseInt(e||`0`,10),{data:h,isLoading:g,error:_}=K({queryKey:[`project`,m],queryFn:()=>Z.getProject(m),enabled:m>0}),{data:v,isLoading:b}=K({queryKey:[`project-archives`,m],queryFn:()=>Z.getProjectArchives(m),enabled:m>0}),{data:x,isLoading:S}=K({queryKey:[`project-bom`,m],queryFn:()=>Z.getProjectBOM(m),enabled:m>0}),{data:C,isLoading:w}=K({queryKey:[`project-timeline`,m],queryFn:()=>Z.getProjectTimeline(m,20),enabled:m>0}),{data:T}=K({queryKey:[`settings`],queryFn:Z.getSettings}),{data:E}=K({queryKey:[`project-folders`,m],queryFn:()=>Z.getLibraryFoldersByProject(m),enabled:m>0}),{data:D,isLoading:O}=K({queryKey:[`project-files`,m],queryFn:()=>Z.getLibraryFiles(null,!1,m),enabled:m>0}),k=(0,y.useMemo)(()=>{let e=new Map;for(let t of D??[])if(t.folder_id!=null){let n=e.get(t.folder_id)??[];n.push(t),e.set(t.folder_id,n)}return e},[D]),{data:A}=K({queryKey:[`project-file-progress`,m],queryFn:()=>Z.getProjectFileProgress(m),enabled:m>0}),j=(0,y.useMemo)(()=>{let e=new Map;for(let t of A??[])e.set(t.file_id,t.completed_count);return e},[A]),M=(0,y.useMemo)(()=>{let e=h?.target_sets;if(!e||!D)return null;let t=D.filter(e=>F5(e));return t.length===0?null:Math.min(...t.map(t=>Math.min(j.get(t.id)??0,e)))},[h?.target_sets,D,j]),N=Pf(T?.currency||`USD`),P=T?.time_format||`system`,F=q({mutationFn:e=>Z.updateProject(m,e),onSuccess:()=>{r.invalidateQueries({queryKey:[`project`,m]}),r.invalidateQueries({queryKey:[`projects`]}),s(!1),l(!1),i(n(`projectDetail.toast.projectUpdated`),`success`)},onError:e=>{i(e.message,`error`)}}),I=()=>{d(h?.notes||``),l(!0)},L=()=>{F.mutate({notes:u})},R=()=>{l(!1),d(``)},[z,B]=(0,y.useState)(``),[V,ee]=(0,y.useState)(1),[te,ne]=(0,y.useState)(``),[re,ie]=(0,y.useState)(``),[ae,oe]=(0,y.useState)(``),[se,H]=(0,y.useState)(!1),[ce,le]=(0,y.useState)(!1),[ue,de]=(0,y.useState)(null),[fe,pe]=(0,y.useState)(``),[me,he]=(0,y.useState)(1),[ge,_e]=(0,y.useState)(``),[ve,ye]=(0,y.useState)(``),[be,xe]=(0,y.useState)(``),[Se,Ce]=(0,y.useState)({isOpen:!1,title:``,message:``,onConfirm:()=>{}}),we=q({mutationFn:e=>Z.createBOMItem(m,e),onSuccess:()=>{r.invalidateQueries({queryKey:[`project-bom`,m]}),r.invalidateQueries({queryKey:[`project`,m]}),B(``),ee(1),ne(``),ie(``),oe(``),H(!1),i(n(`projectDetail.toast.partAdded`),`success`)},onError:e=>i(e.message,`error`)}),Te=q({mutationFn:({itemId:e,data:t})=>Z.updateBOMItem(m,e,t),onSuccess:()=>{r.invalidateQueries({queryKey:[`project-bom`,m]}),r.invalidateQueries({queryKey:[`project`,m]}),de(null)},onError:e=>i(e.message,`error`)}),Ee=q({mutationFn:e=>Z.deleteBOMItem(m,e),onSuccess:()=>{r.invalidateQueries({queryKey:[`project-bom`,m]}),r.invalidateQueries({queryKey:[`project`,m]}),i(n(`projectDetail.toast.partRemoved`),`success`)},onError:e=>i(e.message,`error`)}),De=e=>{e.preventDefault(),z.trim()&&we.mutate({name:z.trim(),quantity_needed:V,unit_price:te?parseFloat(te):void 0,sourcing_url:re.trim()||void 0,remarks:ae.trim()||void 0})},Oe=e=>{let t=e.is_complete?0:e.quantity_needed;Te.mutate({itemId:e.id,data:{quantity_acquired:t}})},ke=(e,t)=>{Ce({isOpen:!0,title:n(`projectDetail.bom.deletePart`),message:n(`projectDetail.bom.deleteConfirm`,{name:t}),onConfirm:()=>{Ce(e=>({...e,isOpen:!1})),Ee.mutate(e)}})},Ae=e=>{de(e),pe(e.name),he(e.quantity_needed),_e(e.unit_price?.toString()||``),ye(e.sourcing_url||``),xe(e.remarks||``)},je=e=>{e.preventDefault(),!(!ue||!fe.trim())&&Te.mutate({itemId:ue.id,data:{name:fe.trim(),quantity_needed:me,unit_price:ge?parseFloat(ge):void 0,sourcing_url:ve.trim()||void 0,remarks:be.trim()||void 0}})},Me=()=>{de(null)},Ne=async()=>{try{let{blob:e,filename:t}=await Z.exportProjectZip(Number(m)),r=URL.createObjectURL(e),a=document.createElement(`a`);a.href=r,a.download=t||`${h?.name||`project`}_${new Date().toISOString().split(`T`)[0]}.zip`,a.click(),URL.revokeObjectURL(r),i(n(`projectDetail.toast.projectExported`),`success`)}catch(e){i(e.message,`error`)}},Pe=q({mutationFn:()=>Z.createTemplateFromProject(m),onSuccess:()=>{r.invalidateQueries({queryKey:[`projects`]}),i(n(`projectDetail.toast.templateCreated`),`success`)},onError:e=>i(e.message,`error`)}),Fe=e=>rp(e,P,{month:`short`,day:`numeric`,hour:`2-digit`,minute:`2-digit`});if(g)return(0,G.jsx)(`div`,{className:`flex items-center justify-center py-24`,children:(0,G.jsx)(Y,{className:`w-8 h-8 animate-spin text-bambu-green`})});if(_||!h)return(0,G.jsxs)(`div`,{className:`text-center py-24`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:_?`${n(`common.error`)}: ${_.message}`:n(`projectDetail.notFound`)}),(0,G.jsx)(Q,{variant:`secondary`,className:`mt-4`,onClick:()=>t(`/projects`),children:n(`projectDetail.backToProjects`)})]});let Ie=h.stats,Le=Ie?.progress_percent??0,Re=Ie?.parts_progress_percent??0;return(0,G.jsxs)(`div`,{className:`p-4 md:p-8 space-y-8`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray`,children:[(0,G.jsx)(Ai,{to:`/projects`,className:`hover:text-white transition-colors`,children:n(`nav.projects`)}),(0,G.jsx)(ms,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-white`,children:h.name})]}),(0,G.jsxs)(`div`,{className:`flex items-start justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-4`,children:[(0,G.jsx)(`button`,{onClick:()=>t(`/projects`),className:`p-2 rounded-lg bg-bambu-card hover:bg-bambu-dark-tertiary transition-colors`,children:(0,G.jsx)(Lo,{className:`w-5 h-5 text-bambu-gray`})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-4 h-4 rounded-full shrink-0`,style:{backgroundColor:h.color||`#6b7280`}}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h1`,{className:`text-2xl font-bold text-white`,children:h.name}),h.description&&(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:h.description})]})]}),(0,G.jsx)(FKe,{status:h.status,t:n})]}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:Ne,disabled:!a(`projects:read`),title:a(`projects:read`)?n(`projectDetail.exportProject`):n(`projectDetail.noExportPermission`),children:[(0,G.jsx)(Ys,{className:`w-4 h-4 mr-2`}),n(`projectDetail.export`)]}),(0,G.jsxs)(Q,{onClick:()=>s(!0),disabled:!a(`projects:update`),title:a(`projects:update`)?void 0:n(`projectDetail.noEditPermission`),children:[(0,G.jsx)(Dl,{className:`w-4 h-4 mr-2`}),n(`common.edit`)]})]})]}),(h.target_count||h.target_parts_count||h.target_sets)&&(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-4 space-y-4`,children:[h.target_count&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:n(`projectDetail.progress.platesProgress`)}),(0,G.jsxs)(`span`,{className:`text-sm font-medium text-white`,children:[Ie?.total_archives||0,` / `,h.target_count,` `,n(`projectDetail.progress.printJobs`)]})]}),(0,G.jsx)(`div`,{className:`h-3 bg-bambu-dark rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full transition-all duration-500`,style:{width:`${Math.min(Le,100)}%`,backgroundColor:Le>=100?`#22c55e`:h.color||`#6b7280`}})}),(0,G.jsxs)(`div`,{className:`flex justify-between mt-1`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray/70`,children:n(`projectDetail.progress.percentComplete`,{percent:Le.toFixed(0)})}),Ie?.remaining_prints!=null&&Ie.remaining_prints>0&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray/70`,children:n(`projectDetail.progress.remaining`,{count:Ie.remaining_prints})})]})]}),h.target_parts_count&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:n(`projectDetail.progress.partsProgress`)}),(0,G.jsxs)(`span`,{className:`text-sm font-medium text-white`,children:[Ie?.completed_prints||0,` / `,h.target_parts_count,` `,n(`projectDetail.progress.parts`)]})]}),(0,G.jsx)(`div`,{className:`h-3 bg-bambu-dark rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full transition-all duration-500`,style:{width:`${Math.min(Re,100)}%`,backgroundColor:Re>=100?`#22c55e`:h.color||`#6b7280`}})}),(0,G.jsxs)(`div`,{className:`flex justify-between mt-1`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray/70`,children:n(`projectDetail.progress.percentComplete`,{percent:Re.toFixed(0)})}),Ie?.remaining_parts!=null&&Ie.remaining_parts>0&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray/70`,children:n(`projectDetail.progress.remaining`,{count:Ie.remaining_parts})})]})]}),h.target_sets?(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:n(`projectDetail.progress.setsProgress`)}),(0,G.jsxs)(`span`,{className:`text-sm font-medium text-white`,children:[M??0,` / `,h.target_sets,` `,n(`projectDetail.progress.sets`)]})]}),(0,G.jsx)(`div`,{className:`h-3 bg-bambu-dark rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full transition-all duration-500`,style:{width:`${Math.min((M??0)/h.target_sets*100,100)}%`,backgroundColor:(M??0)>=h.target_sets?`#22c55e`:h.color||`#6b7280`}})}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/70 mt-1`,children:n(`projectDetail.progress.setsHint`)})]}):null]})}),Ie&&(0,G.jsxs)(`div`,{className:`grid grid-cols-2 md:grid-cols-4 gap-4`,children:[(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{className:`p-4`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg bg-bambu-dark text-bambu-green`,children:(0,G.jsx)(Sl,{className:`w-5 h-5`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`projectDetail.stats.printJobs`)}),(0,G.jsxs)(`p`,{className:`text-xl font-semibold text-white`,children:[Ie.total_archives,` `,(0,G.jsx)(`span`,{className:`text-sm font-normal text-bambu-gray`,children:n(`projectDetail.stats.total`)})]}),Ie.failed_prints>0&&(0,G.jsx)(`p`,{className:`text-sm text-status-error`,children:n(`projectDetail.stats.failed`,{count:Ie.failed_prints})}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`projectDetail.stats.partsPrinted`,{count:Ie.completed_prints})})]})]})})}),(0,G.jsx)(IKe,{icon:js,label:n(`projectDetail.stats.printTime`),value:lp(Ie.total_print_time_hours),color:`text-yellow-600 dark:text-yellow-400`}),(0,G.jsx)(IKe,{icon:Ll,label:n(`projectDetail.stats.filamentUsed`),value:L5(Ie.total_filament_grams),color:`text-purple-600 dark:text-purple-400`})]}),h.rollup_stats&&(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-4`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2 mb-3`,children:[(0,G.jsx)(bc,{className:`w-5 h-5`}),n(`projectDetail.rollup.title`,{count:h.descendant_count})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 md:grid-cols-4 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase`,children:n(`projectDetail.stats.printJobs`)}),(0,G.jsx)(`p`,{className:`text-lg font-semibold text-white`,children:h.rollup_stats.total_archives}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:n(`projectDetail.stats.partsPrinted`,{count:h.rollup_stats.completed_prints})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase`,children:n(`projectDetail.stats.printTime`)}),(0,G.jsx)(`p`,{className:`text-lg font-semibold text-white`,children:lp(h.rollup_stats.total_print_time_hours)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase`,children:n(`projectDetail.stats.filamentUsed`)}),(0,G.jsx)(`p`,{className:`text-lg font-semibold text-white`,children:L5(h.rollup_stats.total_filament_grams)})]}),(()=>{let e=h.rollup_stats.estimated_cost+h.rollup_stats.total_energy_cost+h.rollup_stats.bom_cost;return e<=0?null:(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase`,children:n(`projectDetail.cost.totalCost`)}),(0,G.jsxs)(`p`,{className:`text-lg font-semibold text-bambu-green`,children:[N,e.toFixed(2)]})]})})()]}),h.rollup_stats.progress_percent!==null&&(0,G.jsxs)(`div`,{className:`mt-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:n(`projectDetail.rollup.progress`)}),(0,G.jsx)(`span`,{className:`text-sm font-medium text-white`,children:n(`projectDetail.rollup.percentComplete`,{percent:h.rollup_stats.progress_percent.toFixed(0)})})]}),(0,G.jsx)(`div`,{className:`h-3 bg-bambu-dark rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full transition-all duration-500`,style:{width:`${Math.min(h.rollup_stats.progress_percent,100)}%`,backgroundColor:h.rollup_stats.progress_percent>=100?`#22c55e`:h.color||`#6b7280`}})})]})]})}),Ie&&(()=>{let e=Ie.estimated_cost+Ie.total_energy_cost+Ie.bom_cost;return Ie.estimated_cost>0||e>0||h.budget!==null})()&&(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-4`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white mb-3`,children:n(`projectDetail.cost.title`)}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 md:grid-cols-4 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase`,children:n(`projectDetail.cost.filamentCost`)}),(0,G.jsxs)(`p`,{className:`text-lg font-semibold text-white`,children:[N,Ie.estimated_cost.toFixed(2)]})]}),Ie.total_energy_kwh>0&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase`,children:n(`projectDetail.cost.energy`)}),(0,G.jsxs)(`p`,{className:`text-lg font-semibold text-white`,children:[Ie.total_energy_kwh.toFixed(3),` kWh`,Ie.total_energy_cost>0&&(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray ml-1`,children:[`(`,N,Ie.total_energy_cost.toFixed(2),`)`]})]})]}),(()=>{let e=Ie.estimated_cost+Ie.total_energy_cost+Ie.bom_cost;return e<=0?null:(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase`,children:n(`projectDetail.cost.totalCost`)}),(0,G.jsxs)(`p`,{className:`text-lg font-semibold text-bambu-green`,children:[N,e.toFixed(2)]}),Ie.bom_cost>0&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/70`,children:n(`projectDetail.cost.includesBom`)})]})})(),h.budget!==null&&(()=>{let e=Ie.estimated_cost+Ie.total_energy_cost+Ie.bom_cost,t=h.budget-e;return(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray uppercase`,children:n(`projectDetail.cost.budget`)}),(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[n(`projectDetail.cost.total`),`: `,(0,G.jsxs)(`span`,{className:`text-white font-semibold`,children:[N,h.budget.toFixed(2)]})]}),(0,G.jsxs)(`p`,{className:`text-sm ${t>=0?`text-bambu-green`:`text-red-700 dark:text-red-400`}`,children:[n(`projectDetail.cost.remaining`),`: `,(0,G.jsxs)(`span`,{className:`font-semibold`,children:[N,t.toFixed(2)]})]})]})})()]})]})}),h.children&&h.children.length>0&&(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-4`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2 mb-3`,children:[(0,G.jsx)(bc,{className:`w-5 h-5`}),n(`projectDetail.subProjects.title`,{count:h.children.length})]}),(0,G.jsx)(`div`,{className:`space-y-2`,children:h.children.map(e=>(0,G.jsxs)(Ai,{to:`/projects/${e.id}`,className:`flex items-center justify-between gap-4 p-3 bg-bambu-dark rounded-lg hover:bg-bambu-dark-tertiary transition-colors`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 min-w-0`,children:[(0,G.jsx)(`div`,{className:`w-3 h-3 rounded-full flex-shrink-0`,style:{backgroundColor:e.color||`#6b7280`}}),(0,G.jsx)(`span`,{className:`text-white truncate`,children:e.name}),(0,G.jsx)(`span`,{className:`text-xs px-2 py-0.5 rounded flex-shrink-0 ${e.status===`completed`?`bg-status-ok/20 text-status-ok`:e.status===`archived`?`bg-bambu-gray/20 text-bambu-gray`:`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`}`,children:e.status}),e.descendant_count>0&&(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray flex-shrink-0 inline-flex items-center gap-1`,children:[(0,G.jsx)(bc,{className:`w-3 h-3`}),e.descendant_count]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-4 text-sm text-bambu-gray flex-shrink-0`,children:[e.total_archives>0&&(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:n(`projectDetail.subProjects.jobs`,{count:e.total_archives})}),e.total_filament_grams>0&&(0,G.jsx)(`span`,{className:`hidden md:inline`,children:L5(e.total_filament_grams)}),e.total_cost>0&&(0,G.jsxs)(`span`,{className:`hidden md:inline`,children:[N,e.total_cost.toFixed(2)]}),e.progress_percent!==null&&(0,G.jsxs)(`span`,{children:[e.progress_percent.toFixed(0),`%`]})]})]},e.id))})]})}),h.parent_id&&h.parent_name&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(qc,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:n(`projectDetail.partOf`)}),(0,G.jsx)(Ai,{to:`/projects/${h.parent_id}`,className:`text-bambu-green hover:underline`,children:h.parent_name})]}),(h.tags||h.due_date||h.priority!==`normal`)&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-4`,children:[h.priority&&h.priority!==`normal`&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray uppercase`,children:n(`projectDetail.priorityLabel`)}),(0,G.jsx)(RKe,{priority:h.priority,t:n})]}),h.due_date&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(as,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:np(h.due_date,{year:`numeric`,month:`short`,day:`numeric`})}),R5(h.due_date,n)&&(0,G.jsxs)(`span`,{className:`text-xs ${R5(h.due_date,n).color}`,children:[`(`,R5(h.due_date,n).label,`)`]})]}),h.tags&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Tu,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1`,children:h.tags.split(`,`).map((e,t)=>(0,G.jsx)(`span`,{className:`px-2 py-0.5 bg-bambu-dark-tertiary text-bambu-gray text-xs rounded`,children:e.trim()},t))})]})]}),(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(dc,{className:`w-5 h-5`}),n(`projectDetail.notes.title`)]}),c?(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:R,disabled:F.isPending,children:[(0,G.jsx)(td,{className:`w-4 h-4 mr-1`}),n(`common.cancel`)]}),(0,G.jsxs)(Q,{size:`sm`,onClick:L,disabled:F.isPending,children:[F.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin mr-1`}):(0,G.jsx)(Kl,{className:`w-4 h-4 mr-1`}),n(`common.save`)]})]}):(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:I,disabled:!a(`projects:update`),title:a(`projects:update`)?void 0:n(`projectDetail.notes.noEditPermission`),children:[(0,G.jsx)(Dl,{className:`w-4 h-4 mr-1`}),n(`common.edit`)]})]}),c?(0,G.jsx)(q4,{content:u,onChange:d,placeholder:n(`projectDetail.notes.placeholder`)}):h.notes?(0,G.jsx)(`div`,{className:`prose prose-invert prose-sm max-w-none`,dangerouslySetInnerHTML:{__html:nq.sanitize(h.notes)}}):(0,G.jsx)(`p`,{className:`text-bambu-gray/70 text-sm italic`,children:n(`projectDetail.notes.empty`)})]})}),(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-4`,children:[(0,G.jsx)(`div`,{className:`flex items-center justify-between mb-3`,children:(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(_c,{className:`w-5 h-5`}),n(`projectDetail.files.title`)]})}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mb-3`,children:[(0,G.jsx)(Ai,{to:`/files`,className:`text-bambu-green hover:underline`,children:n(`projectDetail.files.linkFolders`)}),` `,n(`projectDetail.files.forQuickAccess`)]}),E&&E.length>0?(0,G.jsx)(`div`,{className:`space-y-4`,children:E.map(e=>{let t=k.get(e.id)??[],r=O;return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(Ai,{to:`/files?folder=${e.id}`,className:`flex items-center justify-between p-3 bg-bambu-dark rounded-lg hover:bg-bambu-dark-tertiary transition-colors mb-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 min-w-0`,children:[(0,G.jsx)(_c,{className:`w-5 h-5 text-bambu-green shrink-0`}),(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white truncate`,children:e.name}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`projectDetail.files.fileCount`,{count:e.file_count})})]})]}),(0,G.jsx)(ms,{className:`w-4 h-4 text-bambu-gray shrink-0`})]}),r?(0,G.jsx)(`div`,{className:`flex items-center gap-2 px-3 py-2 text-bambu-gray text-sm`,children:(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`})}):t.length===0?(0,G.jsx)(`p`,{className:`text-bambu-gray/60 text-xs italic px-3`,children:n(`projectDetail.files.noFiles`)}):(0,G.jsx)(`div`,{className:`space-y-1 pl-3`,children:t.map(e=>{let t=F5(e);return(0,G.jsxs)(`div`,{className:`flex items-center gap-3 p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 shrink-0 rounded bg-bambu-dark overflow-hidden flex items-center justify-center`,children:e.thumbnail_path?(0,G.jsx)(`img`,{src:Z.getLibraryFileThumbnailUrl(e.id),alt:e.print_name||e.filename,className:`w-full h-full object-cover`}):(0,G.jsx)(oc,{className:`w-5 h-5 text-bambu-gray/40`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white truncate`,title:e.print_name||e.filename,children:e.print_name||e.filename}),(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded font-medium ${e.file_type===`3mf`?`bg-bambu-green/20 text-bambu-green`:e.file_type===`gcode`||e.file_type===`gcode.3mf`?`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`:`bg-bambu-gray/20 text-bambu-gray`}`,children:e.file_type.toUpperCase()})]}),t&&(()=>{let t=j.get(e.id)??0,r=h.target_sets;if(!r)return t>0?(0,G.jsxs)(`span`,{className:`shrink-0 text-xs px-1.5 py-0.5 rounded-full bg-bambu-dark text-bambu-gray`,title:n(`projectDetail.files.printedCount`,{count:t}),children:[t,`×`]}):null;let i=Math.min(t/r*100,100),a=t>=r?`text-status-ok`:t>0?`text-status-warning`:`text-bambu-gray`,o=t>=r?`bg-status-ok`:t>0?`bg-status-warning`:`bg-bambu-gray`;return(0,G.jsxs)(`div`,{className:`shrink-0 w-20`,title:n(`projectDetail.files.progressTooltip`,{done:t,target:r}),children:[(0,G.jsxs)(`p`,{className:`text-xs font-medium text-right ${a}`,children:[t,` / `,r]}),(0,G.jsx)(`div`,{className:`h-1 bg-bambu-dark rounded-full overflow-hidden mt-1`,children:(0,G.jsx)(`div`,{className:`h-full ${o}`,style:{width:`${i}%`}})})]})})(),t&&(0,G.jsx)(`div`,{className:`flex items-center gap-1 shrink-0`,children:(0,G.jsx)(`button`,{onClick:()=>p(e),title:n(`common.print`),className:`p-1.5 rounded hover:bg-bambu-green/20 text-bambu-green transition-colors`,children:(0,G.jsx)(Ll,{className:`w-4 h-4`})})})]},e.id)})})]},e.id)})}):(0,G.jsx)(`p`,{className:`text-bambu-gray/70 text-sm italic`,children:n(`projectDetail.files.empty`)})]})}),(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-4`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(su,{className:`w-5 h-5`}),n(`projectDetail.bom.title`),Ie&&Ie.bom_total_items>0&&(0,G.jsxs)(`span`,{className:`text-sm font-normal text-bambu-gray`,children:[`(`,n(`projectDetail.bom.acquired`,{completed:Ie.bom_completed_items,total:Ie.bom_total_items}),`)`]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[x&&x.some(e=>e.is_complete)&&(0,G.jsx)(`button`,{onClick:()=>le(!ce),className:`text-xs px-2 py-1 rounded transition-colors ${ce?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark text-bambu-gray hover:text-white`}`,children:n(ce?`projectDetail.bom.showAll`:`projectDetail.bom.hideDone`)}),!se&&(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>H(!0),disabled:!a(`projects:update`),title:a(`projects:update`)?void 0:n(`projectDetail.bom.noAddPermission`),children:[(0,G.jsx)(Pl,{className:`w-4 h-4 mr-1`}),n(`projectDetail.bom.addPart`)]})]})]}),se&&(0,G.jsxs)(`form`,{onSubmit:De,className:`bg-bambu-dark rounded-lg p-4 mb-4 space-y-3`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-3`,children:[(0,G.jsx)(`input`,{type:`text`,value:z,onChange:e=>B(e.target.value),className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:n(`projectDetail.bom.partNamePlaceholder`),autoFocus:!0}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,value:V,onChange:e=>ee(parseInt(e.target.value)||1),className:`w-20 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-sm text-white focus:outline-none focus:border-bambu-green`,min:`1`,placeholder:n(`projectDetail.bom.qty`)}),(0,G.jsx)(`input`,{type:`number`,step:`0.01`,value:te,onChange:e=>ne(e.target.value),className:`flex-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:n(`projectDetail.bom.price`,{currency:N})})]})]}),(0,G.jsx)(`input`,{type:`url`,value:re,onChange:e=>ie(e.target.value),className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:n(`projectDetail.bom.sourcingUrlPlaceholder`)}),(0,G.jsx)(`input`,{type:`text`,value:ae,onChange:e=>oe(e.target.value),className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:n(`projectDetail.bom.remarksPlaceholder`)}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,size:`sm`,onClick:()=>H(!1),children:n(`common.cancel`)}),(0,G.jsx)(Q,{type:`submit`,size:`sm`,disabled:!z.trim()||we.isPending,children:we.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):n(`projectDetail.bom.addPart`)})]})]}),S?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-4`,children:(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin text-bambu-green`})}):x&&x.length>0?(0,G.jsxs)(`div`,{className:`space-y-2`,children:[x.filter(e=>!ce||!e.is_complete).map(e=>(0,G.jsx)(`div`,{className:`p-3 rounded-lg transition-colors ${e.is_complete?`bg-status-ok/10`:`bg-bambu-dark`}`,children:ue?.id===e.id?(0,G.jsxs)(`form`,{onSubmit:je,className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-3`,children:[(0,G.jsx)(`input`,{type:`text`,value:fe,onChange:e=>pe(e.target.value),className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:n(`projectDetail.bom.partName`),autoFocus:!0}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`input`,{type:`number`,value:me,onChange:e=>he(parseInt(e.target.value)||1),className:`w-20 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-sm text-white focus:outline-none focus:border-bambu-green`,min:`1`,placeholder:n(`projectDetail.bom.qty`)}),(0,G.jsx)(`input`,{type:`number`,step:`0.01`,value:ge,onChange:e=>_e(e.target.value),className:`flex-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:n(`projectDetail.bom.price`,{currency:N})})]})]}),(0,G.jsx)(`input`,{type:`url`,value:ve,onChange:e=>ye(e.target.value),className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:n(`projectDetail.bom.sourcingUrlPlaceholder`)}),(0,G.jsx)(`input`,{type:`text`,value:be,onChange:e=>xe(e.target.value),className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded px-3 py-2 text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:n(`projectDetail.bom.remarksPlaceholder`)}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,size:`sm`,onClick:Me,children:n(`common.cancel`)}),(0,G.jsx)(Q,{type:`submit`,size:`sm`,disabled:!fe.trim()||Te.isPending,children:Te.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):n(`common.save`)})]})]}):(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(`button`,{onClick:()=>a(`projects:update`)&&Oe(e),disabled:Te.isPending||!a(`projects:update`),title:a(`projects:update`)?void 0:n(`projectDetail.bom.noUpdatePermission`),className:`w-5 h-5 mt-0.5 rounded border-2 flex items-center justify-center transition-colors shrink-0 ${e.is_complete?`bg-status-ok border-status-ok text-white`:a(`projects:update`)?`border-bambu-gray hover:border-bambu-green`:`border-bambu-gray/50 cursor-not-allowed`}`,children:e.is_complete&&(0,G.jsx)(xs,{className:`w-3 h-3`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 min-w-0`,children:[(0,G.jsxs)(`p`,{className:`text-sm font-medium ${e.is_complete?`text-bambu-gray line-through`:`text-white`}`,children:[e.name,(0,G.jsxs)(`span`,{className:`text-bambu-gray font-normal ml-2`,children:[`x`,e.quantity_needed]})]}),e.unit_price!==null&&(0,G.jsxs)(`span`,{className:`text-xs text-bambu-green whitespace-nowrap`,children:[N,(e.unit_price*e.quantity_needed).toFixed(2)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`button`,{onClick:()=>a(`projects:update`)&&Ae(e),disabled:!a(`projects:update`),className:`p-1 rounded transition-colors shrink-0 ${a(`projects:update`)?`hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white`:`text-bambu-gray/50 cursor-not-allowed`}`,title:a(`projects:update`)?n(`common.edit`):n(`projectDetail.bom.noEditPermission`),children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>a(`projects:update`)&&ke(e.id,e.name),disabled:!a(`projects:update`),className:`p-1 rounded transition-colors shrink-0 ${a(`projects:update`)?`hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-red-400`:`text-bambu-gray/50 cursor-not-allowed`}`,title:a(`projects:update`)?n(`common.delete`):n(`projectDetail.bom.noDeletePermission`),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})]}),e.sourcing_url&&(0,G.jsxs)(`a`,{href:e.sourcing_url,target:`_blank`,rel:`noopener noreferrer`,className:`flex items-center gap-1 mt-1 text-xs text-blue-700 dark:text-blue-400 hover:text-blue-900 dark:hover:text-blue-300 transition-colors`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(nc,{className:`w-3 h-3 shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,children:(()=>{try{return new URL(e.sourcing_url).hostname.replace(`www.`,``)}catch{return e.sourcing_url}})()})]}),e.remarks&&(0,G.jsx)(`p`,{className:`mt-1 text-xs text-bambu-gray/80 italic`,children:e.remarks})]})]})},e.id)),Ie&&Ie.bom_cost>0&&(0,G.jsxs)(`div`,{className:`pt-2 mt-2 border-t border-bambu-dark-tertiary flex justify-between text-sm`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:n(`projectDetail.bom.totalCost`)}),(0,G.jsxs)(`span`,{className:`text-white font-medium`,children:[N,Ie.bom_cost.toFixed(2)]})]})]}):(0,G.jsx)(`p`,{className:`text-bambu-gray/70 text-sm italic`,children:n(`projectDetail.bom.empty`)})]})}),(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-4`,children:[(0,G.jsx)(`div`,{className:`flex items-center justify-between mb-3`,children:(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Rc,{className:`w-5 h-5`}),n(`projectDetail.timeline.title`)]})}),w?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-4`,children:(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin text-bambu-green`})}):C&&C.length>0?(0,G.jsx)(`div`,{className:`space-y-3`,children:C.slice(0,10).map((e,t)=>(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsxs)(`div`,{className:`w-8 h-8 rounded-full flex items-center justify-center shrink-0 ${e.event_type===`print_completed`?`bg-status-ok/20 text-status-ok`:e.event_type===`print_failed`?`bg-status-error/20 text-status-error`:e.event_type===`print_started`?`bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:[e.event_type===`print_completed`&&(0,G.jsx)(xs,{className:`w-4 h-4`}),e.event_type===`print_failed`&&(0,G.jsx)(Ds,{className:`w-4 h-4`}),e.event_type===`print_started`&&(0,G.jsx)(Ll,{className:`w-4 h-4`}),e.event_type===`queued`&&(0,G.jsx)(Qc,{className:`w-4 h-4`}),e.event_type===`project_created`&&(0,G.jsx)(Pl,{className:`w-4 h-4`})]}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white`,children:e.title}),e.description&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray truncate`,children:e.description}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/70`,children:Fe(e.timestamp)})]})]},t))}):(0,G.jsx)(`p`,{className:`text-bambu-gray/70 text-sm italic`,children:n(`projectDetail.timeline.empty`)})]})}),!h.is_template&&(0,G.jsx)(`div`,{className:`flex justify-end`,children:(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>Pe.mutate(),disabled:Pe.isPending||!a(`projects:create`),title:a(`projects:create`)?void 0:n(`projectDetail.template.noCreatePermission`),children:[Pe.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin mr-2`}):(0,G.jsx)(Vs,{className:`w-4 h-4 mr-2`}),n(`projectDetail.template.saveAsTemplate`)]})}),Ie&&(Ie.queued_prints>0||Ie.in_progress_prints>0)&&(0,G.jsx)(Ld,{children:(0,G.jsxs)(zd,{className:`p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Qc,{className:`w-5 h-5`}),n(`projectDetail.queue.title`)]}),(0,G.jsx)(Ai,{to:`/queue?project=${m}`,className:`text-sm text-bambu-green hover:underline`,children:n(`projectDetail.queue.viewAll`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-4 text-sm`,children:[Ie.in_progress_prints>0&&(0,G.jsx)(`span`,{className:`text-yellow-700 dark:text-yellow-400`,children:n(`projectDetail.queue.printing`,{count:Ie.in_progress_prints})}),Ie.queued_prints>0&&(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:n(`projectDetail.queue.queued`,{count:Ie.queued_prints})})]})]})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`div`,{className:`flex items-center justify-between mb-4`,children:(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Sl,{className:`w-5 h-5`}),n(`projectDetail.prints.title`,{count:v?.length||0})]})}),b?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-8`,children:(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin text-bambu-green`})}):(0,G.jsx)(LKe,{archives:v||[],t:n})]}),o&&(0,G.jsx)(jKe,{t:n,currencySymbol:N,project:{...h,archive_count:Ie?.total_archives||0,total_items:Ie?.total_items||0,completed_count:Ie?.completed_prints||0,failed_count:Ie?.failed_prints||0,queue_count:Ie?.queued_prints||0,progress_percent:Ie?.progress_percent||null,child_count:h.children?.length??0,archives:[]},onClose:()=>s(!1),onSave:e=>F.mutate(e),isLoading:F.isPending}),Se.isOpen&&(0,G.jsx)(rf,{title:Se.title,message:Se.message,confirmText:n(`common.delete`),variant:`danger`,onConfirm:Se.onConfirm,onCancel:()=>Ce(e=>({...e,isOpen:!1}))}),f&&(0,G.jsx)(qW,{mode:`create`,libraryFileId:f.id,archiveName:f.print_name||f.filename,projectId:m,onClose:()=>p(null),onSuccess:()=>{p(null),r.invalidateQueries({queryKey:[`archives`]}),r.invalidateQueries({queryKey:[`queue`]})}})]})}function BKe({icon:e,label:t,dropdownLabel:n,onPrimary:r,items:i}){let[a,o]=(0,y.useState)(!1),s=(0,y.useRef)(null);return(0,y.useEffect)(()=>{if(!a)return;let e=e=>{s.current&&!s.current.contains(e.target)&&o(!1)},t=e=>{e.key===`Escape`&&(e.stopPropagation(),o(!1))};return document.addEventListener(`mousedown`,e),document.addEventListener(`keydown`,t),()=>{document.removeEventListener(`mousedown`,e),document.removeEventListener(`keydown`,t)}},[a]),i.length===0?(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:r,children:[e,t]}):(0,G.jsxs)(`div`,{className:`relative inline-flex`,ref:s,children:[(0,G.jsxs)(`div`,{className:`flex relative z-50`,children:[(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>{o(!1),r()},className:`rounded-r-none`,children:[e,t]}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>o(e=>!e),"aria-label":n,"aria-haspopup":`menu`,"aria-expanded":a,className:`rounded-l-none border-l border-bambu-dark px-2`,children:(0,G.jsx)(ps,{className:`w-4 h-4 transition-transform ${a?`rotate-180`:``}`})})]}),a&&(0,G.jsx)(`div`,{role:`menu`,className:`absolute right-0 top-full mt-1 w-56 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg z-50 py-1`,children:i.map(e=>(0,G.jsxs)(`button`,{type:`button`,role:`menuitem`,onClick:()=>{o(!1),e.onClick()},className:`w-full text-left px-3 py-2 text-sm text-bambu-gray-light hover:bg-bambu-dark-tertiary hover:text-white transition-colors flex items-center gap-2`,children:[(0,G.jsx)(nc,{className:`w-4 h-4 flex-shrink-0`}),e.label]},e.key))})]})}function VKe({archiveId:e,libraryFileId:t,title:n,fileType:r,onClose:i,onSliceWithBambuddy:a}){let{t:o}=U(),{showToast:s}=Gd(),{data:c}=K({queryKey:[`settings`],queryFn:Z.getSettings}),l=XG(c?.open_in_slicer,c?.preferred_slicer),u=t!=null,[d,f]=(0,y.useState)(null),[p,m]=(0,y.useState)(null),[h,g]=(0,y.useState)(!0),[_,v]=(0,y.useState)(null),[b,x]=(0,y.useState)(!1),[S,C]=(0,y.useState)(null),[w,T]=(0,y.useState)(0),[E,D]=(0,y.useState)(!1),[O,k]=(0,y.useState)(null),[A,j]=(0,y.useState)(!1),[M,N]=(0,y.useState)(!1),P=(0,y.useRef)(null),F=(0,y.useRef)(null),I=.35;(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&i()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[i]),(0,y.useEffect)(()=>{if(g(!0),u){let e=(r||``).toLowerCase(),t=e===`3mf`||e===`gcode.3mf`||e===`stl`;m({has_model:t,has_source:!1,build_volume:{x:256,y:256,z:256},filament_colors:[]}),f(t?`3d`:null),g(!1);return}if(!e){m(null),f(null),g(!1);return}Z.getArchiveCapabilities(e).then(e=>{m(e),e.has_model&&f(`3d`),g(!1)}).catch(()=>{m({has_model:!0,has_source:!1,build_volume:{x:256,y:256,z:256},filament_colors:[]}),f(`3d`),g(!1)})},[e,r,u]),(0,y.useEffect)(()=>{if(x(!0),C(null),T(0),u){let e=(r||``).toLowerCase();if(!t||!(e===`3mf`||e===`gcode.3mf`)){v(null),x(!1);return}Z.getLibraryFilePlates(t).then(e=>v(e)).catch(()=>v(null)).finally(()=>x(!1));return}if(!e){v(null),x(!1);return}Z.getArchivePlates(e).then(e=>v(e)).catch(()=>v(null)).finally(()=>x(!1))},[e,r,u,t]);let L=(0,y.useMemo)(()=>_?.plates??[],[_]),R=(_?.is_multi_plate??!1)&&L.length>1,z=E&&R,B=S==null?null:L.find(e=>e.index===S)??null,V=e=>e.object_count??e.objects?.length??0,ee=L.reduce((e,t)=>e+V(t),0),te=B?V(B):ee,ne=B?o(`modelViewer.plateNumber`,{number:B.index}):o(`modelViewer.allPlates`),re=L.length>0,ie=(0,y.useRef)(null),ae=(0,y.useRef)(null),[oe,se]=(0,y.useState)(10),[H,ce]=(0,y.useState)(3),le=L.length>oe,ue=Math.max(1,Math.ceil(L.length/oe)),de=le?L.slice(w*oe,(w+1)*oe):L;(0,y.useEffect)(()=>{if(!z){se(10),ce(3);return}let e=ie.current,t=ae.current;if(!e||!t)return;let n=0,r=()=>{let n=t.clientWidth,r=Math.floor(n/210),i=Math.max(3,Math.min(5,r||3));ce(e=>e===i?e:i);let a=window.getComputedStyle(e),o=Number.parseFloat(a.rowGap||`0`),s=e.querySelector(`button`)?.getBoundingClientRect().height??44,c=t.clientHeight,l=Math.max(1,Math.floor((c+o)/(s+o)))*i,u=Math.max(1,l-1);se(e=>e===u?e:u)},i=()=>{n&&cancelAnimationFrame(n),n=requestAnimationFrame(r)};i();let a=new ResizeObserver(i);return a.observe(t),a.observe(e),()=>{n&&cancelAnimationFrame(n),a.disconnect()}},[z,L.length]),(0,y.useEffect)(()=>{if(!le){T(0);return}T(e=>Math.min(e,ue-1))},[L.length,le,ue]),(0,y.useEffect)(()=>{if(!le||S==null)return;let e=L.findIndex(e=>e.index===S);if(e<0)return;let t=Math.floor(e/oe);T(e=>e===t?e:t)},[L,oe,S,le]),(0,y.useEffect)(()=>{if(!z){k(null),N(!1);return}if(M)return;let e=P.current,t=F.current;if(!e||!t)return;let n=e.clientHeight;if(!n)return;let r=Math.max(240,n*I),i=Math.max(160,n-10-r),a=Math.min(t.scrollHeight,i);k(Math.max(160,a))},[z,M,L.length,w,10,160,240,I]),(0,y.useEffect)(()=>{if(!A)return;let e=e=>{let t=P.current;if(!t)return;let n=t.getBoundingClientRect(),r=n.height;if(!r)return;let i=Math.max(240,r*I),a=Math.max(160,r-10-i);k(Math.min(a,Math.max(160,e.clientY-n.top)))},t=()=>{j(!1),N(!0)};return document.addEventListener(`mousemove`,e),document.addEventListener(`mouseup`,t),document.body.style.cursor=`row-resize`,document.body.style.userSelect=`none`,()=>{document.removeEventListener(`mousemove`,e),document.removeEventListener(`mouseup`,t),document.body.style.cursor=``,document.body.style.userSelect=``}},[A,10,160,240,I]);let fe=l===`orcaslicer`?[`orcaslicer`,`bambu_studio`]:[`bambu_studio`,`orcaslicer`],pe=u?fe.filter(e=>uAe(r,e)):fe,me=pe.length>0,he=mAe(r),ge=!!(u&&c?.use_slicer_api&&a&&he),_e=async r=>{if(!me)return;let i=n||`model`;try{if(u){let{token:e}=await Z.createLibrarySlicerToken(t),n=Z.getLibrarySlicerDownloadUrl(t,e,i);eK(`${window.location.origin}${n}`,r)}else{let{token:t}=await Z.createArchiveSlicerToken(e),n=Z.getArchiveSlicerDownloadUrl(e,t,i);eK(`${window.location.origin}${n}`,r)}}catch{s(o(`modelViewer.openInSlicerFailed`),`error`),eK(u?`${window.location.origin}${Z.getLibraryFileDownloadUrl(t)}`:`${window.location.origin}${Z.getArchiveForSlicer(e,i)}`,r)}},ve=ge?pe:pe.slice(1),ye=e=>o(e===`orcaslicer`?`settings.slicerOrcaSlicer`:`settings.slicerBambuStudio`),be=ve.map(e=>({key:e,label:o(`modelViewer.openInSlicerWith`,{slicer:ye(e)}),onClick:()=>_e(e)}));return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 ${E?`p-0`:`p-8`}`,onClick:i,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary w-full flex flex-col ${E?`h-full max-w-none rounded-none`:`h-[80vh] max-w-4xl rounded-xl`}`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 min-w-0 flex-1 mr-4`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white truncate`,children:n}),re&&(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray bg-bambu-dark-tertiary/70 px-2 py-1 rounded whitespace-nowrap`,children:[ne,`: `,o(`modelViewer.objectCount`,{count:te})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[ge?(0,G.jsx)(BKe,{icon:(0,G.jsx)(Rs,{className:`w-4 h-4`}),label:o(`slice.action`),dropdownLabel:o(`modelViewer.moreSlicerOptions`),onPrimary:()=>a?.(),items:be}):me?(0,G.jsx)(BKe,{icon:(0,G.jsx)(nc,{className:`w-4 h-4`}),label:pe[0]===l?o(`modelViewer.openInSlicer`):o(`modelViewer.openInSlicerWith`,{slicer:ye(pe[0])}),dropdownLabel:o(`modelViewer.moreSlicerOptions`),onPrimary:()=>_e(pe[0]),items:be}):(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,disabled:!0,children:[(0,G.jsx)(nc,{className:`w-4 h-4`}),o(`modelViewer.openInSlicer`)]}),(0,G.jsx)(Q,{variant:`secondary`,size:`sm`,onClick:()=>D(e=>!e),title:E?`Exit fullscreen`:`Enter fullscreen`,children:E?(0,G.jsx)(dl,{className:`w-4 h-4`}):(0,G.jsx)(sl,{className:`w-4 h-4`})}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:i,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]})]}),p&&(0,G.jsx)(`div`,{className:`flex border-b border-bambu-dark-tertiary`,children:(0,G.jsxs)(`button`,{onClick:()=>p.has_model&&f(`3d`),disabled:!p.has_model,className:`flex items-center gap-2 px-6 py-3 text-sm font-medium transition-colors ${d===`3d`?`text-bambu-green border-b-2 border-bambu-green`:p.has_model?`text-bambu-gray hover:text-white`:`text-bambu-gray/30 cursor-not-allowed`}`,children:[(0,G.jsx)(Zo,{className:`w-4 h-4`}),o(`modelViewer.tabs.model`),!p.has_model&&(0,G.jsxs)(`span`,{className:`text-xs`,children:[`(`,o(`modelViewer.notAvailable`),`)`]})]})}),(0,G.jsx)(`div`,{className:`flex-1 overflow-hidden p-4`,children:h?(0,G.jsx)(`div`,{className:`w-full h-full flex items-center justify-center`,children:(0,G.jsx)(Y,{className:`w-8 h-8 animate-spin text-bambu-green`})}):d===`3d`&&p?(0,G.jsxs)(`div`,{ref:P,className:`w-full h-full flex flex-col ${z?`gap-0 min-h-0`:`gap-3`}`,children:[R&&(0,G.jsxs)(`div`,{ref:F,style:z&&O!=null?{height:O}:void 0,className:`rounded-lg border border-bambu-dark-tertiary bg-bambu-dark p-3 ${z?`flex flex-col shrink-0`:``}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-bambu-gray mb-2`,children:[(0,G.jsx)(qc,{className:`w-4 h-4`}),o(`modelViewer.plates`),b&&(0,G.jsx)(Y,{className:`w-3 h-3 animate-spin`})]}),(0,G.jsxs)(`div`,{className:z?`flex flex-col min-h-0 flex-1`:void 0,children:[(0,G.jsx)(`div`,{ref:ae,className:z?`min-h-0 overflow-hidden pr-1 flex-1`:void 0,children:(0,G.jsxs)(`div`,{ref:ie,className:z?`grid gap-2`:`grid grid-cols-2 md:grid-cols-3 gap-2`,style:z?{gridTemplateColumns:`repeat(${H}, minmax(0, 1fr))`}:void 0,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>C(null),className:`flex items-center rounded-lg border text-left transition-colors ${z?`gap-1.5 p-1.5 w-full`:`gap-2 p-2`} ${S==null?`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary bg-bambu-dark-secondary hover:border-bambu-gray`}`,children:[(0,G.jsx)(`div`,{className:`rounded bg-bambu-dark-tertiary flex items-center justify-center ${z?`w-8 h-8`:`w-10 h-10`}`,children:(0,G.jsx)(qc,{className:`${z?`w-4 h-4`:`w-5 h-5`} text-bambu-gray`})}),(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`p`,{className:`${z?`text-xs`:`text-sm`} text-white font-medium truncate`,children:o(`modelViewer.allPlates`)}),(0,G.jsx)(`p`,{className:`${z?`text-[10px]`:`text-xs`} text-bambu-gray truncate`,children:o(`modelViewer.plateCount`,{count:L.length})})]}),S==null&&(0,G.jsx)(fs,{className:`${z?`w-3.5 h-3.5`:`w-4 h-4`} text-bambu-green flex-shrink-0`})]}),de.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>C(e.index),className:`flex items-center rounded-lg border text-left transition-colors ${z?`gap-1.5 p-1.5 w-full`:`gap-2 p-2`} ${S===e.index?`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary bg-bambu-dark-secondary hover:border-bambu-gray`}`,children:[e.has_thumbnail&&e.thumbnail_url?(0,G.jsx)(`img`,{src:_d(e.thumbnail_url),alt:`Plate ${e.index}`,className:`${z?`w-8 h-8`:`w-10 h-10`} rounded object-cover bg-bambu-dark-tertiary`}):(0,G.jsx)(`div`,{className:`rounded bg-bambu-dark-tertiary flex items-center justify-center ${z?`w-8 h-8`:`w-10 h-10`}`,children:(0,G.jsx)(qc,{className:`${z?`w-4 h-4`:`w-5 h-5`} text-bambu-gray`})}),(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`p`,{className:`${z?`text-xs`:`text-sm`} text-white font-medium truncate`,children:e.name||o(`modelViewer.plateNumber`,{number:e.index})}),(0,G.jsx)(`p`,{className:`${z?`text-[10px]`:`text-xs`} text-bambu-gray truncate`,children:o(`modelViewer.objectCount`,{count:e.object_count??e.objects?.length??0})})]}),S===e.index&&(0,G.jsx)(fs,{className:`${z?`w-3.5 h-3.5`:`w-4 h-4`} text-bambu-green flex-shrink-0`})]},e.index))]})}),(B||le)&&(0,G.jsxs)(`div`,{className:`mt-auto pt-3 flex items-center gap-4 text-xs text-bambu-gray overflow-x-auto`,children:[B&&(0,G.jsxs)(`div`,{className:`flex items-center gap-3 whitespace-nowrap`,children:[(0,G.jsx)(`span`,{children:o(`modelViewer.plateNumber`,{number:B.index})}),B.print_time_seconds!=null&&(0,G.jsx)(`span`,{children:o(`modelViewer.eta`,{minutes:Math.round(B.print_time_seconds/60)})}),B.filament_used_grams!=null&&(0,G.jsxs)(`span`,{children:[B.filament_used_grams.toFixed(1),` g`]}),B.filaments.length>0&&(0,G.jsx)(`span`,{children:o(`modelViewer.filamentCount`,{count:B.filaments.length})})]}),le&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 whitespace-nowrap ${B?`ml-auto`:``}`,children:[(0,G.jsx)(`span`,{children:o(`modelViewer.pagination.pageOf`,{current:w+1,total:ue})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>T(e=>Math.max(e-1,0)),disabled:w===0,className:`px-2 py-1 rounded border text-xs ${w===0?`border-bambu-dark-tertiary text-bambu-gray/40 cursor-not-allowed`:`border-bambu-dark-tertiary text-bambu-gray hover:text-white hover:border-bambu-gray`}`,children:o(`modelViewer.pagination.prev`)}),(()=>{let e=Math.max(0,w-2),t=Math.min(ue,e+5);t-e<5&&(e=Math.max(0,t-5));let n=Array.from({length:t-e},(t,n)=>e+n);return(0,G.jsxs)(G.Fragment,{children:[e>0&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>T(0),className:`px-2 py-1 rounded border text-xs ${w===0?`border-bambu-green text-bambu-green`:`border-bambu-dark-tertiary text-bambu-gray hover:text-white hover:border-bambu-gray`}`,children:`1`}),e>1&&(0,G.jsx)(`span`,{className:`px-1`,children:`…`}),n.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>T(e),className:`px-2 py-1 rounded border text-xs ${w===e?`border-bambu-green text-bambu-green`:`border-bambu-dark-tertiary text-bambu-gray hover:text-white hover:border-bambu-gray`}`,children:e+1},e)),t<ue-1&&(0,G.jsx)(`span`,{className:`px-1`,children:`…`}),t<ue&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>T(ue-1),className:`px-2 py-1 rounded border text-xs ${w===ue-1?`border-bambu-green text-bambu-green`:`border-bambu-dark-tertiary text-bambu-gray hover:text-white hover:border-bambu-gray`}`,children:ue})]})})(),(0,G.jsx)(`button`,{type:`button`,onClick:()=>T(e=>Math.min(e+1,ue-1)),disabled:w>=ue-1,className:`px-2 py-1 rounded border text-xs ${w>=ue-1?`border-bambu-dark-tertiary text-bambu-gray/40 cursor-not-allowed`:`border-bambu-dark-tertiary text-bambu-gray hover:text-white hover:border-bambu-gray`}`,children:o(`modelViewer.pagination.next`)})]})]})]})]})]}),z&&(0,G.jsx)(`div`,{role:`separator`,"aria-orientation":`horizontal`,onMouseDown:e=>{e.preventDefault(),j(!0),N(!0)},className:`h-2 cursor-row-resize flex items-center justify-center ${A?`bg-bambu-dark-tertiary`:`bg-bambu-dark-secondary/60 hover:bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(`div`,{className:`w-12 h-1 rounded-full bg-bambu-gray/50`})}),(0,G.jsx)(`div`,{className:`flex-1 ${z?`min-h-0`:``}`,children:(0,G.jsx)(lT,{url:u?Z.getLibraryFileDownloadUrl(t):p.has_source?Z.getSource3mfDownloadUrl(e):Z.getArchiveDownload(e),fileType:r,buildVolume:p.build_volume,filamentColors:p.filament_colors,selectedPlateId:S,className:`w-full h-full`})})]}):(0,G.jsx)(`div`,{className:`w-full h-full flex items-center justify-center text-bambu-gray`,children:o(`modelViewer.noPreview`)})})]})})}var z5=[`library-tags`];function HKe({open:e,fileIds:t,onClose:n}){let{t:r}=U(),i=co(),{showToast:a}=Gd(),[o,s]=(0,y.useState)(`add`),[c,l]=(0,y.useState)(new Set),[u,d]=(0,y.useState)(``),[f,p]=(0,y.useState)(``);(0,y.useEffect)(()=>{e||(s(`add`),l(new Set),d(``),p(``))},[e]);let{data:m=[],isLoading:h}=K({queryKey:z5,queryFn:Z.getLibraryTags,enabled:e}),g=(0,y.useMemo)(()=>{let e=u.trim().toLowerCase();return e?m.filter(t=>t.name.toLowerCase().includes(e)):m},[m,u]),_=e=>{l(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},v=q({mutationFn:e=>Z.createLibraryTag(e),onSuccess:e=>{l(t=>new Set(t).add(e.id)),p(``),i.invalidateQueries({queryKey:z5})},onError:e=>{a(e.message||r(`fileManager.tags.saveFailed`),`error`)}}),b=q({mutationFn:()=>Z.bulkAssignLibraryTags(t,Array.from(c),o),onSuccess:e=>{a(o===`add`?r(`fileManager.tags.applyAddSuccess`,{count:e.associations_added,files:e.files_updated}):r(`fileManager.tags.applyRemoveSuccess`,{count:e.associations_removed,files:e.files_updated}),`success`),i.invalidateQueries({queryKey:[`library-files`]}),i.invalidateQueries({queryKey:z5}),n()},onError:e=>{a(e.message||r(`fileManager.tags.applyFailed`),`error`)}});if((0,y.useEffect)(()=>{if(!e)return;let t=e=>{e.key===`Escape`&&!b.isPending&&!v.isPending&&n()};return document.addEventListener(`keydown`,t),()=>document.removeEventListener(`keydown`,t)},[e,n,b.isPending,v.isPending]),!e)return null;let x=!f.trim()||v.isPending||m.some(e=>e.name.toLowerCase()===f.trim().toLowerCase()),S=`bulk-tags-picker-title`;return(0,G.jsxs)(`div`,{className:`fixed inset-0 z-[60] flex items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60`,onClick:()=>!b.isPending&&n()}),(0,G.jsxs)(`div`,{className:`relative w-full max-w-md mx-4 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-2xl max-h-[90vh] flex flex-col`,role:`dialog`,"aria-modal":`true`,"aria-labelledby":S,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-4 px-5 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`h3`,{id:S,className:`text-base font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Tu,{className:`w-4 h-4 text-bambu-green`}),r(`fileManager.tags.bulkTitle`,{count:t.length})]}),(0,G.jsx)(`button`,{type:`button`,className:`p-1.5 text-bambu-gray hover:text-white rounded`,onClick:n,"aria-label":r(`common.close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`px-5 py-3 border-b border-bambu-dark-tertiary flex gap-4 text-sm`,children:[(0,G.jsxs)(`label`,{className:`flex items-center gap-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`radio`,name:`bulk-action`,checked:o===`add`,onChange:()=>s(`add`),className:`accent-bambu-green`}),(0,G.jsx)(`span`,{className:`text-white`,children:r(`fileManager.tags.actionAdd`)})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`radio`,name:`bulk-action`,checked:o===`remove`,onChange:()=>s(`remove`),className:`accent-bambu-green`}),(0,G.jsx)(`span`,{className:`text-white`,children:r(`fileManager.tags.actionRemove`)})]})]}),(0,G.jsx)(`div`,{className:`px-5 py-3 border-b border-bambu-dark-tertiary`,children:(0,G.jsx)(`input`,{type:`text`,value:u,onChange:e=>d(e.target.value),placeholder:r(`fileManager.tags.searchPlaceholder`),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`})}),(0,G.jsx)(`div`,{className:`overflow-y-auto flex-1 min-h-[8rem] max-h-[24rem]`,children:h?(0,G.jsxs)(`div`,{className:`flex items-center justify-center py-12 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-5 h-5 animate-spin mr-2`}),r(`common.loading`)]}):g.length===0?(0,G.jsx)(`div`,{className:`py-12 text-center text-bambu-gray text-sm`,children:m.length===0?r(`fileManager.tags.empty`):r(`fileManager.tags.noMatches`)}):(0,G.jsx)(`ul`,{className:`divide-y divide-bambu-dark-tertiary/40`,children:g.map(e=>(0,G.jsx)(`li`,{children:(0,G.jsxs)(`label`,{className:`flex items-center gap-3 px-5 py-2 hover:bg-bambu-dark-tertiary/30 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:c.has(e.id),onChange:()=>_(e.id),className:`accent-bambu-green`}),(0,G.jsx)(`span`,{className:`text-sm text-white truncate flex-1`,children:e.name}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:e.file_count})]})},e.id))})}),o===`add`&&(0,G.jsxs)(`div`,{className:`px-5 py-3 border-t border-bambu-dark-tertiary flex gap-2`,children:[(0,G.jsx)(`input`,{type:`text`,value:f,onChange:e=>p(e.target.value),placeholder:r(`fileManager.tags.createPlaceholder`),maxLength:64,className:`flex-1 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,onKeyDown:e=>{e.key===`Enter`&&!x&&(e.preventDefault(),v.mutate(f.trim()))}}),(0,G.jsxs)(Q,{type:`button`,variant:`secondary`,onClick:()=>v.mutate(f.trim()),disabled:x,children:[v.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Pl,{className:`w-4 h-4`}),r(`fileManager.tags.createButton`)]})]}),(0,G.jsxs)(`div`,{className:`px-5 py-4 border-t border-bambu-dark-tertiary flex justify-end gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:n,disabled:b.isPending,children:r(`common.cancel`)}),(0,G.jsxs)(Q,{type:`button`,onClick:()=>b.mutate(),disabled:c.size===0||b.isPending||t.length===0,children:[b.isPending&&(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),r(o===`add`?`fileManager.tags.applyAdd`:`fileManager.tags.applyRemove`)]})]})]})]})}function UKe(e,t){let n=t||{};return(e[e.length-1]===``?[...e,``]:e).join((n.padRight?` `:``)+`,`+(n.padLeft===!1?``:` `)).trim()}var WKe=/^[$_\p{ID_Start}][$_\u{200C}\u{200D}\p{ID_Continue}]*$/u,GKe=/^[$_\p{ID_Start}][-$_\u{200C}\u{200D}\p{ID_Continue}]*$/u,KKe={};function qKe(e,t){return((t||KKe).jsx?GKe:WKe).test(e)}var JKe=/[ \t\n\f\r]/g;function YKe(e){return typeof e==`object`?e.type===`text`?XKe(e.value):!1:XKe(e)}function XKe(e){return e.replace(JKe,``)===``}var B5=class{constructor(e,t,n){this.normal=t,this.property=e,n&&(this.space=n)}};B5.prototype.normal={},B5.prototype.property={},B5.prototype.space=void 0;function ZKe(e,t){let n={},r={};for(let t of e)Object.assign(n,t.property),Object.assign(r,t.normal);return new B5(n,r,t)}function V5(e){return e.toLowerCase()}var H5=class{constructor(e,t){this.attribute=t,this.property=e}};H5.prototype.attribute=``,H5.prototype.booleanish=!1,H5.prototype.boolean=!1,H5.prototype.commaOrSpaceSeparated=!1,H5.prototype.commaSeparated=!1,H5.prototype.defined=!1,H5.prototype.mustUseProperty=!1,H5.prototype.number=!1,H5.prototype.overloadedBoolean=!1,H5.prototype.property=``,H5.prototype.spaceSeparated=!1,H5.prototype.space=void 0;var U5=s({boolean:()=>W5,booleanish:()=>G5,commaOrSpaceSeparated:()=>X5,commaSeparated:()=>Y5,number:()=>q5,overloadedBoolean:()=>K5,spaceSeparated:()=>J5}),QKe=0,W5=Z5(),G5=Z5(),K5=Z5(),q5=Z5(),J5=Z5(),Y5=Z5(),X5=Z5();function Z5(){return 2**++QKe}var Q5=Object.keys(U5),$5=class extends H5{constructor(e,t,n,r){let i=-1;if(super(e,t),$Ke(this,`space`,r),typeof n==`number`)for(;++i<Q5.length;){let e=Q5[i];$Ke(this,Q5[i],(n&U5[e])===U5[e])}}};$5.prototype.defined=!0;function $Ke(e,t,n){n&&(e[t]=n)}function e7(e){let t={},n={};for(let[r,i]of Object.entries(e.properties)){let a=new $5(r,e.transform(e.attributes||{},r),i,e.space);e.mustUseProperty&&e.mustUseProperty.includes(r)&&(a.mustUseProperty=!0),t[r]=a,n[V5(r)]=r,n[V5(a.attribute)]=r}return new B5(t,n,e.space)}var eqe=e7({properties:{ariaActiveDescendant:null,ariaAtomic:G5,ariaAutoComplete:null,ariaBusy:G5,ariaChecked:G5,ariaColCount:q5,ariaColIndex:q5,ariaColSpan:q5,ariaControls:J5,ariaCurrent:null,ariaDescribedBy:J5,ariaDetails:null,ariaDisabled:G5,ariaDropEffect:J5,ariaErrorMessage:null,ariaExpanded:G5,ariaFlowTo:J5,ariaGrabbed:G5,ariaHasPopup:null,ariaHidden:G5,ariaInvalid:null,ariaKeyShortcuts:null,ariaLabel:null,ariaLabelledBy:J5,ariaLevel:q5,ariaLive:null,ariaModal:G5,ariaMultiLine:G5,ariaMultiSelectable:G5,ariaOrientation:null,ariaOwns:J5,ariaPlaceholder:null,ariaPosInSet:q5,ariaPressed:G5,ariaReadOnly:G5,ariaRelevant:null,ariaRequired:G5,ariaRoleDescription:J5,ariaRowCount:q5,ariaRowIndex:q5,ariaRowSpan:q5,ariaSelected:G5,ariaSetSize:q5,ariaSort:null,ariaValueMax:q5,ariaValueMin:q5,ariaValueNow:q5,ariaValueText:null,role:null},transform(e,t){return t===`role`?t:`aria-`+t.slice(4).toLowerCase()}});function tqe(e,t){return t in e?e[t]:t}function nqe(e,t){return tqe(e,t.toLowerCase())}var rqe=e7({attributes:{acceptcharset:`accept-charset`,classname:`class`,htmlfor:`for`,httpequiv:`http-equiv`},mustUseProperty:[`checked`,`multiple`,`muted`,`selected`],properties:{abbr:null,accept:Y5,acceptCharset:J5,accessKey:J5,action:null,allow:null,allowFullScreen:W5,allowPaymentRequest:W5,allowUserMedia:W5,alpha:W5,alt:null,as:null,async:W5,autoCapitalize:null,autoComplete:J5,autoFocus:W5,autoPlay:W5,blocking:J5,capture:null,charSet:null,checked:W5,cite:null,className:J5,closedBy:null,colorSpace:null,cols:q5,colSpan:q5,command:null,commandFor:null,content:null,contentEditable:G5,controls:W5,controlsList:J5,coords:q5|Y5,crossOrigin:null,data:null,dateTime:null,decoding:null,default:W5,defer:W5,dir:null,dirName:null,disabled:W5,download:K5,draggable:G5,encType:null,enterKeyHint:null,fetchPriority:null,form:null,formAction:null,formEncType:null,formMethod:null,formNoValidate:W5,formTarget:null,headers:J5,height:q5,hidden:K5,high:q5,href:null,hrefLang:null,htmlFor:J5,httpEquiv:J5,id:null,imageSizes:null,imageSrcSet:null,inert:W5,inputMode:null,integrity:null,is:null,isMap:W5,itemId:null,itemProp:J5,itemRef:J5,itemScope:W5,itemType:J5,kind:null,label:null,lang:null,language:null,list:null,loading:null,loop:W5,low:q5,manifest:null,max:null,maxLength:q5,media:null,method:null,min:null,minLength:q5,multiple:W5,muted:W5,name:null,nonce:null,noModule:W5,noValidate:W5,onAbort:null,onAfterPrint:null,onAuxClick:null,onBeforeMatch:null,onBeforePrint:null,onBeforeToggle:null,onBeforeUnload:null,onBlur:null,onCancel:null,onCanPlay:null,onCanPlayThrough:null,onChange:null,onClick:null,onClose:null,onContextLost:null,onContextMenu:null,onContextRestored:null,onCopy:null,onCueChange:null,onCut:null,onDblClick:null,onDrag:null,onDragEnd:null,onDragEnter:null,onDragExit:null,onDragLeave:null,onDragOver:null,onDragStart:null,onDrop:null,onDurationChange:null,onEmptied:null,onEnded:null,onError:null,onFocus:null,onFormData:null,onHashChange:null,onInput:null,onInvalid:null,onKeyDown:null,onKeyPress:null,onKeyUp:null,onLanguageChange:null,onLoad:null,onLoadedData:null,onLoadedMetadata:null,onLoadEnd:null,onLoadStart:null,onMessage:null,onMessageError:null,onMouseDown:null,onMouseEnter:null,onMouseLeave:null,onMouseMove:null,onMouseOut:null,onMouseOver:null,onMouseUp:null,onOffline:null,onOnline:null,onPageHide:null,onPageShow:null,onPaste:null,onPause:null,onPlay:null,onPlaying:null,onPopState:null,onProgress:null,onRateChange:null,onRejectionHandled:null,onReset:null,onResize:null,onScroll:null,onScrollEnd:null,onSecurityPolicyViolation:null,onSeeked:null,onSeeking:null,onSelect:null,onSlotChange:null,onStalled:null,onStorage:null,onSubmit:null,onSuspend:null,onTimeUpdate:null,onToggle:null,onUnhandledRejection:null,onUnload:null,onVolumeChange:null,onWaiting:null,onWheel:null,open:W5,optimum:q5,pattern:null,ping:J5,placeholder:null,playsInline:W5,popover:null,popoverTarget:null,popoverTargetAction:null,poster:null,preload:null,readOnly:W5,referrerPolicy:null,rel:J5,required:W5,reversed:W5,rows:q5,rowSpan:q5,sandbox:J5,scope:null,scoped:W5,seamless:W5,selected:W5,shadowRootClonable:W5,shadowRootCustomElementRegistry:W5,shadowRootDelegatesFocus:W5,shadowRootMode:null,shadowRootSerializable:W5,shape:null,size:q5,sizes:null,slot:null,span:q5,spellCheck:G5,src:null,srcDoc:null,srcLang:null,srcSet:null,start:q5,step:null,style:null,tabIndex:q5,target:null,title:null,translate:null,type:null,typeMustMatch:W5,useMap:null,value:G5,width:q5,wrap:null,writingSuggestions:null,align:null,aLink:null,archive:J5,axis:null,background:null,bgColor:null,border:q5,borderColor:null,bottomMargin:q5,cellPadding:null,cellSpacing:null,char:null,charOff:null,classId:null,clear:null,code:null,codeBase:null,codeType:null,color:null,compact:W5,declare:W5,event:null,face:null,frame:null,frameBorder:null,hSpace:q5,leftMargin:q5,link:null,longDesc:null,lowSrc:null,marginHeight:q5,marginWidth:q5,noResize:W5,noHref:W5,noShade:W5,noWrap:W5,object:null,profile:null,prompt:null,rev:null,rightMargin:q5,rules:null,scheme:null,scrolling:G5,standby:null,summary:null,text:null,topMargin:q5,valueType:null,version:null,vAlign:null,vLink:null,vSpace:q5,allowTransparency:null,autoCorrect:null,autoSave:null,credentialless:W5,disablePictureInPicture:W5,disableRemotePlayback:W5,exportParts:Y5,part:J5,prefix:null,property:null,results:q5,security:null,unselectable:null},space:`html`,transform:nqe}),iqe=e7({attributes:{accentHeight:`accent-height`,alignmentBaseline:`alignment-baseline`,arabicForm:`arabic-form`,baselineShift:`baseline-shift`,capHeight:`cap-height`,className:`class`,clipPath:`clip-path`,clipRule:`clip-rule`,colorInterpolation:`color-interpolation`,colorInterpolationFilters:`color-interpolation-filters`,colorProfile:`color-profile`,colorRendering:`color-rendering`,crossOrigin:`crossorigin`,dataType:`datatype`,dominantBaseline:`dominant-baseline`,enableBackground:`enable-background`,fillOpacity:`fill-opacity`,fillRule:`fill-rule`,floodColor:`flood-color`,floodOpacity:`flood-opacity`,fontFamily:`font-family`,fontSize:`font-size`,fontSizeAdjust:`font-size-adjust`,fontStretch:`font-stretch`,fontStyle:`font-style`,fontVariant:`font-variant`,fontWeight:`font-weight`,glyphName:`glyph-name`,glyphOrientationHorizontal:`glyph-orientation-horizontal`,glyphOrientationVertical:`glyph-orientation-vertical`,hrefLang:`hreflang`,horizAdvX:`horiz-adv-x`,horizOriginX:`horiz-origin-x`,horizOriginY:`horiz-origin-y`,imageRendering:`image-rendering`,letterSpacing:`letter-spacing`,lightingColor:`lighting-color`,markerEnd:`marker-end`,markerMid:`marker-mid`,markerStart:`marker-start`,maskType:`mask-type`,navDown:`nav-down`,navDownLeft:`nav-down-left`,navDownRight:`nav-down-right`,navLeft:`nav-left`,navNext:`nav-next`,navPrev:`nav-prev`,navRight:`nav-right`,navUp:`nav-up`,navUpLeft:`nav-up-left`,navUpRight:`nav-up-right`,onAbort:`onabort`,onActivate:`onactivate`,onAfterPrint:`onafterprint`,onBeforePrint:`onbeforeprint`,onBegin:`onbegin`,onCancel:`oncancel`,onCanPlay:`oncanplay`,onCanPlayThrough:`oncanplaythrough`,onChange:`onchange`,onClick:`onclick`,onClose:`onclose`,onCopy:`oncopy`,onCueChange:`oncuechange`,onCut:`oncut`,onDblClick:`ondblclick`,onDrag:`ondrag`,onDragEnd:`ondragend`,onDragEnter:`ondragenter`,onDragExit:`ondragexit`,onDragLeave:`ondragleave`,onDragOver:`ondragover`,onDragStart:`ondragstart`,onDrop:`ondrop`,onDurationChange:`ondurationchange`,onEmptied:`onemptied`,onEnd:`onend`,onEnded:`onended`,onError:`onerror`,onFocus:`onfocus`,onFocusIn:`onfocusin`,onFocusOut:`onfocusout`,onHashChange:`onhashchange`,onInput:`oninput`,onInvalid:`oninvalid`,onKeyDown:`onkeydown`,onKeyPress:`onkeypress`,onKeyUp:`onkeyup`,onLoad:`onload`,onLoadedData:`onloadeddata`,onLoadedMetadata:`onloadedmetadata`,onLoadStart:`onloadstart`,onMessage:`onmessage`,onMouseDown:`onmousedown`,onMouseEnter:`onmouseenter`,onMouseLeave:`onmouseleave`,onMouseMove:`onmousemove`,onMouseOut:`onmouseout`,onMouseOver:`onmouseover`,onMouseUp:`onmouseup`,onMouseWheel:`onmousewheel`,onOffline:`onoffline`,onOnline:`ononline`,onPageHide:`onpagehide`,onPageShow:`onpageshow`,onPaste:`onpaste`,onPause:`onpause`,onPlay:`onplay`,onPlaying:`onplaying`,onPopState:`onpopstate`,onProgress:`onprogress`,onRateChange:`onratechange`,onRepeat:`onrepeat`,onReset:`onreset`,onResize:`onresize`,onScroll:`onscroll`,onSeeked:`onseeked`,onSeeking:`onseeking`,onSelect:`onselect`,onShow:`onshow`,onStalled:`onstalled`,onStorage:`onstorage`,onSubmit:`onsubmit`,onSuspend:`onsuspend`,onTimeUpdate:`ontimeupdate`,onToggle:`ontoggle`,onUnload:`onunload`,onVolumeChange:`onvolumechange`,onWaiting:`onwaiting`,onZoom:`onzoom`,overlinePosition:`overline-position`,overlineThickness:`overline-thickness`,paintOrder:`paint-order`,panose1:`panose-1`,pointerEvents:`pointer-events`,referrerPolicy:`referrerpolicy`,renderingIntent:`rendering-intent`,shapeRendering:`shape-rendering`,stopColor:`stop-color`,stopOpacity:`stop-opacity`,strikethroughPosition:`strikethrough-position`,strikethroughThickness:`strikethrough-thickness`,strokeDashArray:`stroke-dasharray`,strokeDashOffset:`stroke-dashoffset`,strokeLineCap:`stroke-linecap`,strokeLineJoin:`stroke-linejoin`,strokeMiterLimit:`stroke-miterlimit`,strokeOpacity:`stroke-opacity`,strokeWidth:`stroke-width`,tabIndex:`tabindex`,textAnchor:`text-anchor`,textDecoration:`text-decoration`,textRendering:`text-rendering`,transformOrigin:`transform-origin`,typeOf:`typeof`,underlinePosition:`underline-position`,underlineThickness:`underline-thickness`,unicodeBidi:`unicode-bidi`,unicodeRange:`unicode-range`,unitsPerEm:`units-per-em`,vAlphabetic:`v-alphabetic`,vHanging:`v-hanging`,vIdeographic:`v-ideographic`,vMathematical:`v-mathematical`,vectorEffect:`vector-effect`,vertAdvY:`vert-adv-y`,vertOriginX:`vert-origin-x`,vertOriginY:`vert-origin-y`,wordSpacing:`word-spacing`,writingMode:`writing-mode`,xHeight:`x-height`,playbackOrder:`playbackorder`,timelineBegin:`timelinebegin`},properties:{about:X5,accentHeight:q5,accumulate:null,additive:null,alignmentBaseline:null,alphabetic:q5,amplitude:q5,arabicForm:null,ascent:q5,attributeName:null,attributeType:null,azimuth:q5,bandwidth:null,baselineShift:null,baseFrequency:null,baseProfile:null,bbox:null,begin:null,bias:q5,by:null,calcMode:null,capHeight:q5,className:J5,clip:null,clipPath:null,clipPathUnits:null,clipRule:null,color:null,colorInterpolation:null,colorInterpolationFilters:null,colorProfile:null,colorRendering:null,content:null,contentScriptType:null,contentStyleType:null,crossOrigin:null,cursor:null,cx:null,cy:null,d:null,dataType:null,defaultAction:null,descent:q5,diffuseConstant:q5,direction:null,display:null,dur:null,divisor:q5,dominantBaseline:null,download:W5,dx:null,dy:null,edgeMode:null,editable:null,elevation:q5,enableBackground:null,end:null,event:null,exponent:q5,externalResourcesRequired:null,fill:null,fillOpacity:q5,fillRule:null,filter:null,filterRes:null,filterUnits:null,floodColor:null,floodOpacity:null,focusable:null,focusHighlight:null,fontFamily:null,fontSize:null,fontSizeAdjust:null,fontStretch:null,fontStyle:null,fontVariant:null,fontWeight:null,format:null,fr:null,from:null,fx:null,fy:null,g1:Y5,g2:Y5,glyphName:Y5,glyphOrientationHorizontal:null,glyphOrientationVertical:null,glyphRef:null,gradientTransform:null,gradientUnits:null,handler:null,hanging:q5,hatchContentUnits:null,hatchUnits:null,height:null,href:null,hrefLang:null,horizAdvX:q5,horizOriginX:q5,horizOriginY:q5,id:null,ideographic:q5,imageRendering:null,initialVisibility:null,in:null,in2:null,intercept:q5,k:q5,k1:q5,k2:q5,k3:q5,k4:q5,kernelMatrix:X5,kernelUnitLength:null,keyPoints:null,keySplines:null,keyTimes:null,kerning:null,lang:null,lengthAdjust:null,letterSpacing:null,lightingColor:null,limitingConeAngle:q5,local:null,markerEnd:null,markerMid:null,markerStart:null,markerHeight:null,markerUnits:null,markerWidth:null,mask:null,maskContentUnits:null,maskType:null,maskUnits:null,mathematical:null,max:null,media:null,mediaCharacterEncoding:null,mediaContentEncodings:null,mediaSize:q5,mediaTime:null,method:null,min:null,mode:null,name:null,navDown:null,navDownLeft:null,navDownRight:null,navLeft:null,navNext:null,navPrev:null,navRight:null,navUp:null,navUpLeft:null,navUpRight:null,numOctaves:null,observer:null,offset:null,onAbort:null,onActivate:null,onAfterPrint:null,onBeforePrint:null,onBegin:null,onCancel:null,onCanPlay:null,onCanPlayThrough:null,onChange:null,onClick:null,onClose:null,onCopy:null,onCueChange:null,onCut:null,onDblClick:null,onDrag:null,onDragEnd:null,onDragEnter:null,onDragExit:null,onDragLeave:null,onDragOver:null,onDragStart:null,onDrop:null,onDurationChange:null,onEmptied:null,onEnd:null,onEnded:null,onError:null,onFocus:null,onFocusIn:null,onFocusOut:null,onHashChange:null,onInput:null,onInvalid:null,onKeyDown:null,onKeyPress:null,onKeyUp:null,onLoad:null,onLoadedData:null,onLoadedMetadata:null,onLoadStart:null,onMessage:null,onMouseDown:null,onMouseEnter:null,onMouseLeave:null,onMouseMove:null,onMouseOut:null,onMouseOver:null,onMouseUp:null,onMouseWheel:null,onOffline:null,onOnline:null,onPageHide:null,onPageShow:null,onPaste:null,onPause:null,onPlay:null,onPlaying:null,onPopState:null,onProgress:null,onRateChange:null,onRepeat:null,onReset:null,onResize:null,onScroll:null,onSeeked:null,onSeeking:null,onSelect:null,onShow:null,onStalled:null,onStorage:null,onSubmit:null,onSuspend:null,onTimeUpdate:null,onToggle:null,onUnload:null,onVolumeChange:null,onWaiting:null,onZoom:null,opacity:null,operator:null,order:null,orient:null,orientation:null,origin:null,overflow:null,overlay:null,overlinePosition:q5,overlineThickness:q5,paintOrder:null,panose1:null,path:null,pathLength:q5,patternContentUnits:null,patternTransform:null,patternUnits:null,phase:null,ping:J5,pitch:null,playbackOrder:null,pointerEvents:null,points:null,pointsAtX:q5,pointsAtY:q5,pointsAtZ:q5,preserveAlpha:null,preserveAspectRatio:null,primitiveUnits:null,propagate:null,property:X5,r:null,radius:null,referrerPolicy:null,refX:null,refY:null,rel:X5,rev:X5,renderingIntent:null,repeatCount:null,repeatDur:null,requiredExtensions:X5,requiredFeatures:X5,requiredFonts:X5,requiredFormats:X5,resource:null,restart:null,result:null,rotate:null,rx:null,ry:null,scale:null,seed:null,shapeRendering:null,side:null,slope:null,snapshotTime:null,specularConstant:q5,specularExponent:q5,spreadMethod:null,spacing:null,startOffset:null,stdDeviation:null,stemh:null,stemv:null,stitchTiles:null,stopColor:null,stopOpacity:null,strikethroughPosition:q5,strikethroughThickness:q5,string:null,stroke:null,strokeDashArray:X5,strokeDashOffset:null,strokeLineCap:null,strokeLineJoin:null,strokeMiterLimit:q5,strokeOpacity:q5,strokeWidth:null,style:null,surfaceScale:q5,syncBehavior:null,syncBehaviorDefault:null,syncMaster:null,syncTolerance:null,syncToleranceDefault:null,systemLanguage:X5,tabIndex:q5,tableValues:null,target:null,targetX:q5,targetY:q5,textAnchor:null,textDecoration:null,textRendering:null,textLength:null,timelineBegin:null,title:null,transformBehavior:null,type:null,typeOf:X5,to:null,transform:null,transformOrigin:null,u1:null,u2:null,underlinePosition:q5,underlineThickness:q5,unicode:null,unicodeBidi:null,unicodeRange:null,unitsPerEm:q5,values:null,vAlphabetic:q5,vMathematical:q5,vectorEffect:null,vHanging:q5,vIdeographic:q5,version:null,vertAdvY:q5,vertOriginX:q5,vertOriginY:q5,viewBox:null,viewTarget:null,visibility:null,width:null,widths:null,wordSpacing:null,writingMode:null,x:null,x1:null,x2:null,xChannelSelector:null,xHeight:q5,y:null,y1:null,y2:null,yChannelSelector:null,z:null,zoomAndPan:null},space:`svg`,transform:tqe}),aqe=e7({properties:{xLinkActuate:null,xLinkArcRole:null,xLinkHref:null,xLinkRole:null,xLinkShow:null,xLinkTitle:null,xLinkType:null},space:`xlink`,transform(e,t){return`xlink:`+t.slice(5).toLowerCase()}}),oqe=e7({attributes:{xmlnsxlink:`xmlns:xlink`},properties:{xmlnsXLink:null,xmlns:null},space:`xmlns`,transform:nqe}),sqe=e7({properties:{xmlBase:null,xmlLang:null,xmlSpace:null},space:`xml`,transform(e,t){return`xml:`+t.slice(3).toLowerCase()}}),cqe={classId:`classID`,dataType:`datatype`,itemId:`itemID`,strokeDashArray:`strokeDasharray`,strokeDashOffset:`strokeDashoffset`,strokeLineCap:`strokeLinecap`,strokeLineJoin:`strokeLinejoin`,strokeMiterLimit:`strokeMiterlimit`,typeOf:`typeof`,xLinkActuate:`xlinkActuate`,xLinkArcRole:`xlinkArcrole`,xLinkHref:`xlinkHref`,xLinkRole:`xlinkRole`,xLinkShow:`xlinkShow`,xLinkTitle:`xlinkTitle`,xLinkType:`xlinkType`,xmlnsXLink:`xmlnsXlink`},lqe=/[A-Z]/g,uqe=/-[a-z]/g,dqe=/^data[-\w.:]+$/i;function fqe(e,t){let n=V5(t),r=t,i=H5;if(n in e.normal)return e.property[e.normal[n]];if(n.length>4&&n.slice(0,4)===`data`&&dqe.test(t)){if(t.charAt(4)===`-`){let e=t.slice(5).replace(uqe,mqe);r=`data`+e.charAt(0).toUpperCase()+e.slice(1)}else{let e=t.slice(4);if(!uqe.test(e)){let n=e.replace(lqe,pqe);n.charAt(0)!==`-`&&(n=`-`+n),t=`data`+n}}i=$5}return new i(r,t)}function pqe(e){return`-`+e.toLowerCase()}function mqe(e){return e.charAt(1).toUpperCase()}var hqe=ZKe([eqe,rqe,aqe,oqe,sqe],`html`),t7=ZKe([eqe,iqe,aqe,oqe,sqe],`svg`);function gqe(e){return e.join(` `).trim()}var _qe=o(((e,t)=>{var n=/\/\*[^*]*\*+([^/*][^*]*\*+)*\//g,r=/\n/g,i=/^\s*/,a=/^(\*?[-#/*\\\w]+(\[[0-9a-z_-]+\])?)\s*/,o=/^:\s*/,s=/^((?:'(?:\\'|.)*?'|"(?:\\"|.)*?"|\([^)]*?\)|[^};])+)/,c=/^[;\s]*/,l=/^\s+|\s+$/g,u=`
+`,d=`/`,f=`*`,p=``,m=`comment`,h=`declaration`;function g(e,t){if(typeof e!=`string`)throw TypeError(`First argument must be a string`);if(!e)return[];t||={};var l=1,g=1;function v(e){var t=e.match(r);t&&(l+=t.length);var n=e.lastIndexOf(u);g=~n?e.length-n:g+e.length}function y(){var e={line:l,column:g};return function(t){return t.position=new b(e),C(),t}}function b(e){this.start=e,this.end={line:l,column:g},this.source=t.source}b.prototype.content=e;function x(n){var r=Error(t.source+`:`+l+`:`+g+`: `+n);if(r.reason=n,r.filename=t.source,r.line=l,r.column=g,r.source=e,!t.silent)throw r}function S(t){var n=t.exec(e);if(n){var r=n[0];return v(r),e=e.slice(r.length),n}}function C(){S(i)}function w(e){var t;for(e||=[];t=T();)t!==!1&&e.push(t);return e}function T(){var t=y();if(!(d!=e.charAt(0)||f!=e.charAt(1))){for(var n=2;p!=e.charAt(n)&&(f!=e.charAt(n)||d!=e.charAt(n+1));)++n;if(n+=2,p===e.charAt(n-1))return x(`End of comment missing`);var r=e.slice(2,n-2);return g+=2,v(r),e=e.slice(n),g+=2,t({type:m,comment:r})}}function E(){var e=y(),t=S(a);if(t){if(T(),!S(o))return x(`property missing ':'`);var r=S(s),i=e({type:h,property:_(t[0].replace(n,p)),value:r?_(r[0].replace(n,p)):p});return S(c),i}}function D(){var e=[];w(e);for(var t;t=E();)t!==!1&&(e.push(t),w(e));return e}return C(),D()}function _(e){return e?e.replace(l,p):p}t.exports=g})),vqe=o((e=>{var t=e&&e.__importDefault||function(e){return e&&e.__esModule?e:{default:e}};Object.defineProperty(e,"__esModule",{value:!0}),e.default=r;var n=t(_qe());function r(e,t){let r=null;if(!e||typeof e!=`string`)return r;let i=(0,n.default)(e),a=typeof t==`function`;return i.forEach(e=>{if(e.type!==`declaration`)return;let{property:n,value:i}=e;a?t(n,i,e):i&&(r||={},r[n]=i)}),r}})),yqe=o((e=>{Object.defineProperty(e,"__esModule",{value:!0}),e.camelCase=void 0;var t=/^--[a-zA-Z0-9_-]+$/,n=/-([a-z])/g,r=/^[^-]+$/,i=/^-(webkit|moz|ms|o|khtml)-/,a=/^-(ms)-/,o=function(e){return!e||r.test(e)||t.test(e)},s=function(e,t){return t.toUpperCase()},c=function(e,t){return`${t}-`};e.camelCase=function(e,t){return t===void 0&&(t={}),o(e)?e:(e=e.toLowerCase(),e=t.reactCompat?e.replace(a,c):e.replace(i,c),e.replace(n,s))}})),bqe=o(((e,t)=>{var n=(e&&e.__importDefault||function(e){return e&&e.__esModule?e:{default:e}})(vqe()),r=yqe();function i(e,t){var i={};return!e||typeof e!=`string`||(0,n.default)(e,function(e,n){e&&n&&(i[(0,r.camelCase)(e,t)]=n)}),i}i.default=i,t.exports=i})),xqe=Sqe(`end`),n7=Sqe(`start`);function Sqe(e){return t;function t(t){let n=t&&t.position&&t.position[e]||{};if(typeof n.line==`number`&&n.line>0&&typeof n.column==`number`&&n.column>0)return{line:n.line,column:n.column,offset:typeof n.offset==`number`&&n.offset>-1?n.offset:void 0}}}function Cqe(e){let t=n7(e),n=xqe(e);if(t&&n)return{start:t,end:n}}function r7(e){return!e||typeof e!=`object`?``:`position`in e||`type`in e?wqe(e.position):`start`in e||`end`in e?wqe(e):`line`in e||`column`in e?i7(e):``}function i7(e){return Tqe(e&&e.line)+`:`+Tqe(e&&e.column)}function wqe(e){return i7(e&&e.start)+`-`+i7(e&&e.end)}function Tqe(e){return e&&typeof e==`number`?e:1}var a7=class extends Error{constructor(e,t,n){super(),typeof t==`string`&&(n=t,t=void 0);let r=``,i={},a=!1;if(t&&(i=`line`in t&&`column`in t||`start`in t&&`end`in t?{place:t}:`type`in t?{ancestors:[t],place:t.position}:{...t}),typeof e==`string`?r=e:!i.cause&&e&&(a=!0,r=e.message,i.cause=e),!i.ruleId&&!i.source&&typeof n==`string`){let e=n.indexOf(`:`);e===-1?i.ruleId=n:(i.source=n.slice(0,e),i.ruleId=n.slice(e+1))}if(!i.place&&i.ancestors&&i.ancestors){let e=i.ancestors[i.ancestors.length-1];e&&(i.place=e.position)}let o=i.place&&`start`in i.place?i.place.start:i.place;this.ancestors=i.ancestors||void 0,this.cause=i.cause||void 0,this.column=o?o.column:void 0,this.fatal=void 0,this.file=``,this.message=r,this.line=o?o.line:void 0,this.name=r7(i.place)||`1:1`,this.place=i.place||void 0,this.reason=this.message,this.ruleId=i.ruleId||void 0,this.source=i.source||void 0,this.stack=a&&i.cause&&typeof i.cause.stack==`string`?i.cause.stack:``,this.actual=void 0,this.expected=void 0,this.note=void 0,this.url=void 0}};a7.prototype.file=``,a7.prototype.name=``,a7.prototype.reason=``,a7.prototype.message=``,a7.prototype.stack=``,a7.prototype.column=void 0,a7.prototype.line=void 0,a7.prototype.ancestors=void 0,a7.prototype.cause=void 0,a7.prototype.fatal=void 0,a7.prototype.place=void 0,a7.prototype.ruleId=void 0,a7.prototype.source=void 0;var Eqe=l(bqe(),1),o7={}.hasOwnProperty,Dqe=new Map,Oqe=/[A-Z]/g,kqe=new Set([`table`,`tbody`,`thead`,`tfoot`,`tr`]),Aqe=new Set([`td`,`th`]);function jqe(e,t){if(!t||t.Fragment===void 0)throw TypeError("Expected `Fragment` in options");let n=t.filePath||void 0,r;if(t.development){if(typeof t.jsxDEV!=`function`)throw TypeError("Expected `jsxDEV` in options when `development: true`");r=Vqe(n,t.jsxDEV)}else{if(typeof t.jsx!=`function`)throw TypeError("Expected `jsx` in production options");if(typeof t.jsxs!=`function`)throw TypeError("Expected `jsxs` in production options");r=Bqe(n,t.jsx,t.jsxs)}let i={Fragment:t.Fragment,ancestors:[],components:t.components||{},create:r,elementAttributeNameCase:t.elementAttributeNameCase||`react`,evaluater:t.createEvaluater?t.createEvaluater():void 0,filePath:n,ignoreInvalidStyle:t.ignoreInvalidStyle||!1,passKeys:t.passKeys!==!1,passNode:t.passNode||!1,schema:t.space===`svg`?t7:hqe,stylePropertyNameCase:t.stylePropertyNameCase||`dom`,tableCellAlignToStyle:t.tableCellAlignToStyle!==!1},a=Mqe(i,e,void 0);return a&&typeof a!=`string`?a:i.create(e,i.Fragment,{children:a||void 0},void 0)}function Mqe(e,t,n){if(t.type===`element`)return Nqe(e,t,n);if(t.type===`mdxFlowExpression`||t.type===`mdxTextExpression`)return Pqe(e,t);if(t.type===`mdxJsxFlowElement`||t.type===`mdxJsxTextElement`)return Iqe(e,t,n);if(t.type===`mdxjsEsm`)return Fqe(e,t);if(t.type===`root`)return Lqe(e,t,n);if(t.type===`text`)return Rqe(e,t)}function Nqe(e,t,n){let r=e.schema,i=r;t.tagName.toLowerCase()===`svg`&&r.space===`html`&&(i=t7,e.schema=i),e.ancestors.push(t);let a=Kqe(e,t.tagName,!1),o=Hqe(e,t),s=c7(e,t);return kqe.has(t.tagName)&&(s=s.filter(function(e){return typeof e==`string`?!YKe(e):!0})),zqe(e,o,a,t),s7(o,s),e.ancestors.pop(),e.schema=r,e.create(t,a,o,n)}function Pqe(e,t){if(t.data&&t.data.estree&&e.evaluater){let n=t.data.estree.body[0];return n.type,e.evaluater.evaluateExpression(n.expression)}l7(e,t.position)}function Fqe(e,t){if(t.data&&t.data.estree&&e.evaluater)return e.evaluater.evaluateProgram(t.data.estree);l7(e,t.position)}function Iqe(e,t,n){let r=e.schema,i=r;t.name===`svg`&&r.space===`html`&&(i=t7,e.schema=i),e.ancestors.push(t);let a=t.name===null?e.Fragment:Kqe(e,t.name,!0),o=Uqe(e,t),s=c7(e,t);return zqe(e,o,a,t),s7(o,s),e.ancestors.pop(),e.schema=r,e.create(t,a,o,n)}function Lqe(e,t,n){let r={};return s7(r,c7(e,t)),e.create(t,e.Fragment,r,n)}function Rqe(e,t){return t.value}function zqe(e,t,n,r){typeof n!=`string`&&n!==e.Fragment&&e.passNode&&(t.node=r)}function s7(e,t){if(t.length>0){let n=t.length>1?t:t[0];n&&(e.children=n)}}function Bqe(e,t,n){return r;function r(e,r,i,a){let o=Array.isArray(i.children)?n:t;return a?o(r,i,a):o(r,i)}}function Vqe(e,t){return n;function n(n,r,i,a){let o=Array.isArray(i.children),s=n7(n);return t(r,i,a,o,{columnNumber:s?s.column-1:void 0,fileName:e,lineNumber:s?s.line:void 0},void 0)}}function Hqe(e,t){let n={},r,i;for(i in t.properties)if(i!==`children`&&o7.call(t.properties,i)){let a=Wqe(e,i,t.properties[i]);if(a){let[i,o]=a;e.tableCellAlignToStyle&&i===`align`&&typeof o==`string`&&Aqe.has(t.tagName)?r=o:n[i]=o}}if(r){let t=n.style||={};t[e.stylePropertyNameCase===`css`?`text-align`:`textAlign`]=r}return n}function Uqe(e,t){let n={};for(let r of t.attributes)if(r.type===`mdxJsxExpressionAttribute`)if(r.data&&r.data.estree&&e.evaluater){let t=r.data.estree.body[0];t.type;let i=t.expression;i.type;let a=i.properties[0];a.type,Object.assign(n,e.evaluater.evaluateExpression(a.argument))}else l7(e,t.position);else{let i=r.name,a;if(r.value&&typeof r.value==`object`)if(r.value.data&&r.value.data.estree&&e.evaluater){let t=r.value.data.estree.body[0];t.type,a=e.evaluater.evaluateExpression(t.expression)}else l7(e,t.position);else a=r.value===null?!0:r.value;n[i]=a}return n}function c7(e,t){let n=[],r=-1,i=e.passKeys?new Map:Dqe;for(;++r<t.children.length;){let a=t.children[r],o;if(e.passKeys){let e=a.type===`element`?a.tagName:a.type===`mdxJsxFlowElement`||a.type===`mdxJsxTextElement`?a.name:void 0;if(e){let t=i.get(e)||0;o=e+`-`+t,i.set(e,t+1)}}let s=Mqe(e,a,o);s!==void 0&&n.push(s)}return n}function Wqe(e,t,n){let r=fqe(e.schema,t);if(!(n==null||typeof n==`number`&&Number.isNaN(n))){if(Array.isArray(n)&&(n=r.commaSeparated?UKe(n):gqe(n)),r.property===`style`){let t=typeof n==`object`?n:Gqe(e,String(n));return e.stylePropertyNameCase===`css`&&(t=qqe(t)),[`style`,t]}return[e.elementAttributeNameCase===`react`&&r.space?cqe[r.property]||r.property:r.attribute,n]}}function Gqe(e,t){try{return(0,Eqe.default)(t,{reactCompat:!0})}catch(t){if(e.ignoreInvalidStyle)return{};let n=t,r=new a7("Cannot parse `style` attribute",{ancestors:e.ancestors,cause:n,ruleId:`style`,source:`hast-util-to-jsx-runtime`});throw r.file=e.filePath||void 0,r.url=`https://github.com/syntax-tree/hast-util-to-jsx-runtime#cannot-parse-style-attribute`,r}}function Kqe(e,t,n){let r;if(!n)r={type:`Literal`,value:t};else if(t.includes(`.`)){let e=t.split(`.`),n=-1,i;for(;++n<e.length;){let t=qKe(e[n])?{type:`Identifier`,name:e[n]}:{type:`Literal`,value:e[n]};i=i?{type:`MemberExpression`,object:i,property:t,computed:!!(n&&t.type===`Literal`),optional:!1}:t}r=i}else r=qKe(t)&&!/^[a-z]/.test(t)?{type:`Identifier`,name:t}:{type:`Literal`,value:t};if(r.type===`Literal`){let t=r.value;return o7.call(e.components,t)?e.components[t]:t}if(e.evaluater)return e.evaluater.evaluateExpression(r);l7(e)}function l7(e,t){let n=new a7("Cannot handle MDX estrees without `createEvaluater`",{ancestors:e.ancestors,place:t,ruleId:`mdx-estree`,source:`hast-util-to-jsx-runtime`});throw n.file=e.filePath||void 0,n.url=`https://github.com/syntax-tree/hast-util-to-jsx-runtime#cannot-handle-mdx-estrees-without-createevaluater`,n}function qqe(e){let t={},n;for(n in e)o7.call(e,n)&&(t[Jqe(n)]=e[n]);return t}function Jqe(e){let t=e.replace(Oqe,Yqe);return t.slice(0,3)===`ms-`&&(t=`-`+t),t}function Yqe(e){return`-`+e.toLowerCase()}var u7={action:[`form`],cite:[`blockquote`,`del`,`ins`,`q`],data:[`object`],formAction:[`button`,`input`],href:[`a`,`area`,`base`,`link`],icon:[`menuitem`],itemId:null,manifest:[`html`],ping:[`a`,`area`],poster:[`video`],src:[`audio`,`embed`,`iframe`,`img`,`input`,`script`,`source`,`track`,`video`]},Xqe={};function Zqe(e,t){let n=t||Xqe;return Qqe(e,typeof n.includeImageAlt==`boolean`?n.includeImageAlt:!0,typeof n.includeHtml==`boolean`?n.includeHtml:!0)}function Qqe(e,t,n){if(eJe(e)){if(`value`in e)return e.type===`html`&&!n?``:e.value;if(t&&`alt`in e&&e.alt)return e.alt;if(`children`in e)return $qe(e.children,t,n)}return Array.isArray(e)?$qe(e,t,n):``}function $qe(e,t,n){let r=[],i=-1;for(;++i<e.length;)r[i]=Qqe(e[i],t,n);return r.join(``)}function eJe(e){return!!(e&&typeof e==`object`)}var tJe=document.createElement(`i`);function d7(e){let t=`&`+e+`;`;tJe.innerHTML=t;let n=tJe.textContent;return n.charCodeAt(n.length-1)===59&&e!==`semi`||n===t?!1:n}function f7(e,t,n,r){let i=e.length,a=0,o;if(t=t<0?-t>i?0:i+t:t>i?i:t,n=n>0?n:0,r.length<1e4)o=Array.from(r),o.unshift(t,n),e.splice(...o);else for(n&&e.splice(t,n);a<r.length;)o=r.slice(a,a+1e4),o.unshift(t,0),e.splice(...o),a+=1e4,t+=1e4}function p7(e,t){return e.length>0?(f7(e,e.length,0,t),e):t}var nJe={}.hasOwnProperty;function rJe(e){let t={},n=-1;for(;++n<e.length;)iJe(t,e[n]);return t}function iJe(e,t){let n;for(n in t){let r=(nJe.call(e,n)?e[n]:void 0)||(e[n]={}),i=t[n],a;if(i)for(a in i){nJe.call(r,a)||(r[a]=[]);let e=i[a];aJe(r[a],Array.isArray(e)?e:e?[e]:[])}}}function aJe(e,t){let n=-1,r=[];for(;++n<t.length;)(t[n].add===`after`?e:r).push(t[n]);f7(e,0,0,r)}function oJe(e,t){let n=Number.parseInt(e,t);return n<9||n===11||n>13&&n<32||n>126&&n<160||n>55295&&n<57344||n>64975&&n<65008||(n&65535)==65535||(n&65535)==65534||n>1114111?`�`:String.fromCodePoint(n)}function m7(e){return e.replace(/[\t\n\r ]+/g,` `).replace(/^ | $/g,``).toLowerCase().toUpperCase()}var h7=S7(/[A-Za-z]/),g7=S7(/[\dA-Za-z]/),sJe=S7(/[#-'*+\--9=?A-Z^-~]/);function _7(e){return e!==null&&(e<32||e===127)}var v7=S7(/\d/),cJe=S7(/[\dA-Fa-f]/),lJe=S7(/[!-/:-@[-`{-~]/);function y7(e){return e!==null&&e<-2}function b7(e){return e!==null&&(e<0||e===32)}function x7(e){return e===-2||e===-1||e===32}var uJe=S7(/\p{P}|\p{S}/u),dJe=S7(/\s/);function S7(e){return t;function t(t){return t!==null&&t>-1&&e.test(String.fromCharCode(t))}}function C7(e){let t=[],n=-1,r=0,i=0;for(;++n<e.length;){let a=e.charCodeAt(n),o=``;if(a===37&&g7(e.charCodeAt(n+1))&&g7(e.charCodeAt(n+2)))i=2;else if(a<128)/[!#$&-;=?-Z_a-z~]/.test(String.fromCharCode(a))||(o=String.fromCharCode(a));else if(a>55295&&a<57344){let t=e.charCodeAt(n+1);a<56320&&t>56319&&t<57344?(o=String.fromCharCode(a,t),i=1):o=`�`}else o=String.fromCharCode(a);o&&=(t.push(e.slice(r,n),encodeURIComponent(o)),r=n+i+1,``),i&&=(n+=i,0)}return t.join(``)+e.slice(r)}function w7(e,t,n,r){let i=r?r-1:1/0,a=0;return o;function o(r){return x7(r)?(e.enter(n),s(r)):t(r)}function s(r){return x7(r)&&a++<i?(e.consume(r),s):(e.exit(n),t(r))}}var fJe={tokenize:pJe};function pJe(e){let t=e.attempt(this.parser.constructs.contentInitial,r,i),n;return t;function r(n){if(n===null){e.consume(n);return}return e.enter(`lineEnding`),e.consume(n),e.exit(`lineEnding`),w7(e,t,`linePrefix`)}function i(t){return e.enter(`paragraph`),a(t)}function a(t){let r=e.enter(`chunkText`,{contentType:`text`,previous:n});return n&&(n.next=r),n=r,o(t)}function o(t){if(t===null){e.exit(`chunkText`),e.exit(`paragraph`),e.consume(t);return}return y7(t)?(e.consume(t),e.exit(`chunkText`),a):(e.consume(t),o)}}var mJe={tokenize:gJe},hJe={tokenize:_Je};function gJe(e){let t=this,n=[],r=0,i,a,o;return s;function s(i){if(r<n.length){let a=n[r];return t.containerState=a[1],e.attempt(a[0].continuation,c,l)(i)}return l(i)}function c(e){if(r++,t.containerState._closeFlow){t.containerState._closeFlow=void 0,i&&v();let n=t.events.length,a=n,o;for(;a--;)if(t.events[a][0]===`exit`&&t.events[a][1].type===`chunkFlow`){o=t.events[a][1].end;break}_(r);let s=n;for(;s<t.events.length;)t.events[s][1].end={...o},s++;return f7(t.events,a+1,0,t.events.slice(n)),t.events.length=s,l(e)}return s(e)}function l(a){if(r===n.length){if(!i)return f(a);if(i.currentConstruct&&i.currentConstruct.concrete)return m(a);t.interrupt=!!(i.currentConstruct&&!i._gfmTableDynamicInterruptHack)}return t.containerState={},e.check(hJe,u,d)(a)}function u(e){return i&&v(),_(r),f(e)}function d(e){return t.parser.lazy[t.now().line]=r!==n.length,o=t.now().offset,m(e)}function f(n){return t.containerState={},e.attempt(hJe,p,m)(n)}function p(e){return r++,n.push([t.currentConstruct,t.containerState]),f(e)}function m(n){if(n===null){i&&v(),_(0),e.consume(n);return}return i||=t.parser.flow(t.now()),e.enter(`chunkFlow`,{_tokenizer:i,contentType:`flow`,previous:a}),h(n)}function h(n){if(n===null){g(e.exit(`chunkFlow`),!0),_(0),e.consume(n);return}return y7(n)?(e.consume(n),g(e.exit(`chunkFlow`)),r=0,t.interrupt=void 0,s):(e.consume(n),h)}function g(e,n){let s=t.sliceStream(e);if(n&&s.push(null),e.previous=a,a&&(a.next=e),a=e,i.defineSkip(e.start),i.write(s),t.parser.lazy[e.start.line]){let e=i.events.length;for(;e--;)if(i.events[e][1].start.offset<o&&(!i.events[e][1].end||i.events[e][1].end.offset>o))return;let n=t.events.length,a=n,s,c;for(;a--;)if(t.events[a][0]===`exit`&&t.events[a][1].type===`chunkFlow`){if(s){c=t.events[a][1].end;break}s=!0}for(_(r),e=n;e<t.events.length;)t.events[e][1].end={...c},e++;f7(t.events,a+1,0,t.events.slice(n)),t.events.length=e}}function _(r){let i=n.length;for(;i-- >r;){let r=n[i];t.containerState=r[1],r[0].exit.call(t,e)}n.length=r}function v(){i.write([null]),a=void 0,i=void 0,t.containerState._closeFlow=void 0}}function _Je(e,t,n){return w7(e,e.attempt(this.parser.constructs.document,t,n),`linePrefix`,this.parser.constructs.disable.null.includes(`codeIndented`)?void 0:4)}function T7(e){if(e===null||b7(e)||dJe(e))return 1;if(uJe(e))return 2}function E7(e,t,n){let r=[],i=-1;for(;++i<e.length;){let a=e[i].resolveAll;a&&!r.includes(a)&&(t=a(t,n),r.push(a))}return t}var D7={name:`attention`,resolveAll:vJe,tokenize:yJe};function vJe(e,t){let n=-1,r,i,a,o,s,c,l,u;for(;++n<e.length;)if(e[n][0]===`enter`&&e[n][1].type===`attentionSequence`&&e[n][1]._close){for(r=n;r--;)if(e[r][0]===`exit`&&e[r][1].type===`attentionSequence`&&e[r][1]._open&&t.sliceSerialize(e[r][1]).charCodeAt(0)===t.sliceSerialize(e[n][1]).charCodeAt(0)){if((e[r][1]._close||e[n][1]._open)&&(e[n][1].end.offset-e[n][1].start.offset)%3&&!((e[r][1].end.offset-e[r][1].start.offset+e[n][1].end.offset-e[n][1].start.offset)%3))continue;c=e[r][1].end.offset-e[r][1].start.offset>1&&e[n][1].end.offset-e[n][1].start.offset>1?2:1;let d={...e[r][1].end},f={...e[n][1].start};bJe(d,-c),bJe(f,c),o={type:c>1?`strongSequence`:`emphasisSequence`,start:d,end:{...e[r][1].end}},s={type:c>1?`strongSequence`:`emphasisSequence`,start:{...e[n][1].start},end:f},a={type:c>1?`strongText`:`emphasisText`,start:{...e[r][1].end},end:{...e[n][1].start}},i={type:c>1?`strong`:`emphasis`,start:{...o.start},end:{...s.end}},e[r][1].end={...o.start},e[n][1].start={...s.end},l=[],e[r][1].end.offset-e[r][1].start.offset&&(l=p7(l,[[`enter`,e[r][1],t],[`exit`,e[r][1],t]])),l=p7(l,[[`enter`,i,t],[`enter`,o,t],[`exit`,o,t],[`enter`,a,t]]),l=p7(l,E7(t.parser.constructs.insideSpan.null,e.slice(r+1,n),t)),l=p7(l,[[`exit`,a,t],[`enter`,s,t],[`exit`,s,t],[`exit`,i,t]]),e[n][1].end.offset-e[n][1].start.offset?(u=2,l=p7(l,[[`enter`,e[n][1],t],[`exit`,e[n][1],t]])):u=0,f7(e,r-1,n-r+3,l),n=r+l.length-u-2;break}}for(n=-1;++n<e.length;)e[n][1].type===`attentionSequence`&&(e[n][1].type=`data`);return e}function yJe(e,t){let n=this.parser.constructs.attentionMarkers.null,r=this.previous,i=T7(r),a;return o;function o(t){return a=t,e.enter(`attentionSequence`),s(t)}function s(o){if(o===a)return e.consume(o),s;let c=e.exit(`attentionSequence`),l=T7(o),u=!l||l===2&&i||n.includes(o),d=!i||i===2&&l||n.includes(r);return c._open=!!(a===42?u:u&&(i||!d)),c._close=!!(a===42?d:d&&(l||!u)),t(o)}}function bJe(e,t){e.column+=t,e.offset+=t,e._bufferIndex+=t}var xJe={name:`autolink`,tokenize:SJe};function SJe(e,t,n){let r=0;return i;function i(t){return e.enter(`autolink`),e.enter(`autolinkMarker`),e.consume(t),e.exit(`autolinkMarker`),e.enter(`autolinkProtocol`),a}function a(t){return h7(t)?(e.consume(t),o):t===64?n(t):l(t)}function o(e){return e===43||e===45||e===46||g7(e)?(r=1,s(e)):l(e)}function s(t){return t===58?(e.consume(t),r=0,c):(t===43||t===45||t===46||g7(t))&&r++<32?(e.consume(t),s):(r=0,l(t))}function c(r){return r===62?(e.exit(`autolinkProtocol`),e.enter(`autolinkMarker`),e.consume(r),e.exit(`autolinkMarker`),e.exit(`autolink`),t):r===null||r===32||r===60||_7(r)?n(r):(e.consume(r),c)}function l(t){return t===64?(e.consume(t),u):sJe(t)?(e.consume(t),l):n(t)}function u(e){return g7(e)?d(e):n(e)}function d(n){return n===46?(e.consume(n),r=0,u):n===62?(e.exit(`autolinkProtocol`).type=`autolinkEmail`,e.enter(`autolinkMarker`),e.consume(n),e.exit(`autolinkMarker`),e.exit(`autolink`),t):f(n)}function f(t){if((t===45||g7(t))&&r++<63){let n=t===45?f:d;return e.consume(t),n}return n(t)}}var O7={partial:!0,tokenize:CJe};function CJe(e,t,n){return r;function r(t){return x7(t)?w7(e,i,`linePrefix`)(t):i(t)}function i(e){return e===null||y7(e)?t(e):n(e)}}var wJe={continuation:{tokenize:EJe},exit:DJe,name:`blockQuote`,tokenize:TJe};function TJe(e,t,n){let r=this;return i;function i(t){if(t===62){let n=r.containerState;return n.open||=(e.enter(`blockQuote`,{_container:!0}),!0),e.enter(`blockQuotePrefix`),e.enter(`blockQuoteMarker`),e.consume(t),e.exit(`blockQuoteMarker`),a}return n(t)}function a(n){return x7(n)?(e.enter(`blockQuotePrefixWhitespace`),e.consume(n),e.exit(`blockQuotePrefixWhitespace`),e.exit(`blockQuotePrefix`),t):(e.exit(`blockQuotePrefix`),t(n))}}function EJe(e,t,n){let r=this;return i;function i(t){return x7(t)?w7(e,a,`linePrefix`,r.parser.constructs.disable.null.includes(`codeIndented`)?void 0:4)(t):a(t)}function a(r){return e.attempt(wJe,t,n)(r)}}function DJe(e){e.exit(`blockQuote`)}var OJe={name:`characterEscape`,tokenize:kJe};function kJe(e,t,n){return r;function r(t){return e.enter(`characterEscape`),e.enter(`escapeMarker`),e.consume(t),e.exit(`escapeMarker`),i}function i(r){return lJe(r)?(e.enter(`characterEscapeValue`),e.consume(r),e.exit(`characterEscapeValue`),e.exit(`characterEscape`),t):n(r)}}var AJe={name:`characterReference`,tokenize:jJe};function jJe(e,t,n){let r=this,i=0,a,o;return s;function s(t){return e.enter(`characterReference`),e.enter(`characterReferenceMarker`),e.consume(t),e.exit(`characterReferenceMarker`),c}function c(t){return t===35?(e.enter(`characterReferenceMarkerNumeric`),e.consume(t),e.exit(`characterReferenceMarkerNumeric`),l):(e.enter(`characterReferenceValue`),a=31,o=g7,u(t))}function l(t){return t===88||t===120?(e.enter(`characterReferenceMarkerHexadecimal`),e.consume(t),e.exit(`characterReferenceMarkerHexadecimal`),e.enter(`characterReferenceValue`),a=6,o=cJe,u):(e.enter(`characterReferenceValue`),a=7,o=v7,u(t))}function u(s){if(s===59&&i){let i=e.exit(`characterReferenceValue`);return o===g7&&!d7(r.sliceSerialize(i))?n(s):(e.enter(`characterReferenceMarker`),e.consume(s),e.exit(`characterReferenceMarker`),e.exit(`characterReference`),t)}return o(s)&&i++<a?(e.consume(s),u):n(s)}}var MJe={partial:!0,tokenize:FJe},NJe={concrete:!0,name:`codeFenced`,tokenize:PJe};function PJe(e,t,n){let r=this,i={partial:!0,tokenize:x},a=0,o=0,s;return c;function c(e){return l(e)}function l(t){let n=r.events[r.events.length-1];return a=n&&n[1].type===`linePrefix`?n[2].sliceSerialize(n[1],!0).length:0,s=t,e.enter(`codeFenced`),e.enter(`codeFencedFence`),e.enter(`codeFencedFenceSequence`),u(t)}function u(t){return t===s?(o++,e.consume(t),u):o<3?n(t):(e.exit(`codeFencedFenceSequence`),x7(t)?w7(e,d,`whitespace`)(t):d(t))}function d(n){return n===null||y7(n)?(e.exit(`codeFencedFence`),r.interrupt?t(n):e.check(MJe,h,b)(n)):(e.enter(`codeFencedFenceInfo`),e.enter(`chunkString`,{contentType:`string`}),f(n))}function f(t){return t===null||y7(t)?(e.exit(`chunkString`),e.exit(`codeFencedFenceInfo`),d(t)):x7(t)?(e.exit(`chunkString`),e.exit(`codeFencedFenceInfo`),w7(e,p,`whitespace`)(t)):t===96&&t===s?n(t):(e.consume(t),f)}function p(t){return t===null||y7(t)?d(t):(e.enter(`codeFencedFenceMeta`),e.enter(`chunkString`,{contentType:`string`}),m(t))}function m(t){return t===null||y7(t)?(e.exit(`chunkString`),e.exit(`codeFencedFenceMeta`),d(t)):t===96&&t===s?n(t):(e.consume(t),m)}function h(t){return e.attempt(i,b,g)(t)}function g(t){return e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),_}function _(t){return a>0&&x7(t)?w7(e,v,`linePrefix`,a+1)(t):v(t)}function v(t){return t===null||y7(t)?e.check(MJe,h,b)(t):(e.enter(`codeFlowValue`),y(t))}function y(t){return t===null||y7(t)?(e.exit(`codeFlowValue`),v(t)):(e.consume(t),y)}function b(n){return e.exit(`codeFenced`),t(n)}function x(e,t,n){let i=0;return a;function a(t){return e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),c}function c(t){return e.enter(`codeFencedFence`),x7(t)?w7(e,l,`linePrefix`,r.parser.constructs.disable.null.includes(`codeIndented`)?void 0:4)(t):l(t)}function l(t){return t===s?(e.enter(`codeFencedFenceSequence`),u(t)):n(t)}function u(t){return t===s?(i++,e.consume(t),u):i>=o?(e.exit(`codeFencedFenceSequence`),x7(t)?w7(e,d,`whitespace`)(t):d(t)):n(t)}function d(r){return r===null||y7(r)?(e.exit(`codeFencedFence`),t(r)):n(r)}}}function FJe(e,t,n){let r=this;return i;function i(t){return t===null?n(t):(e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),a)}function a(e){return r.parser.lazy[r.now().line]?n(e):t(e)}}var k7={name:`codeIndented`,tokenize:LJe},IJe={partial:!0,tokenize:RJe};function LJe(e,t,n){let r=this;return i;function i(t){return e.enter(`codeIndented`),w7(e,a,`linePrefix`,5)(t)}function a(e){let t=r.events[r.events.length-1];return t&&t[1].type===`linePrefix`&&t[2].sliceSerialize(t[1],!0).length>=4?o(e):n(e)}function o(t){return t===null?c(t):y7(t)?e.attempt(IJe,o,c)(t):(e.enter(`codeFlowValue`),s(t))}function s(t){return t===null||y7(t)?(e.exit(`codeFlowValue`),o(t)):(e.consume(t),s)}function c(n){return e.exit(`codeIndented`),t(n)}}function RJe(e,t,n){let r=this;return i;function i(t){return r.parser.lazy[r.now().line]?n(t):y7(t)?(e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),i):w7(e,a,`linePrefix`,5)(t)}function a(e){let a=r.events[r.events.length-1];return a&&a[1].type===`linePrefix`&&a[2].sliceSerialize(a[1],!0).length>=4?t(e):y7(e)?i(e):n(e)}}var zJe={name:`codeText`,previous:VJe,resolve:BJe,tokenize:HJe};function BJe(e){let t=e.length-4,n=3,r,i;if((e[n][1].type===`lineEnding`||e[n][1].type===`space`)&&(e[t][1].type===`lineEnding`||e[t][1].type===`space`)){for(r=n;++r<t;)if(e[r][1].type===`codeTextData`){e[n][1].type=`codeTextPadding`,e[t][1].type=`codeTextPadding`,n+=2,t-=2;break}}for(r=n-1,t++;++r<=t;)i===void 0?r!==t&&e[r][1].type!==`lineEnding`&&(i=r):(r===t||e[r][1].type===`lineEnding`)&&(e[i][1].type=`codeTextData`,r!==i+2&&(e[i][1].end=e[r-1][1].end,e.splice(i+2,r-i-2),t-=r-i-2,r=i+2),i=void 0);return e}function VJe(e){return e!==96||this.events[this.events.length-1][1].type===`characterEscape`}function HJe(e,t,n){let r=0,i,a;return o;function o(t){return e.enter(`codeText`),e.enter(`codeTextSequence`),s(t)}function s(t){return t===96?(e.consume(t),r++,s):(e.exit(`codeTextSequence`),c(t))}function c(t){return t===null?n(t):t===32?(e.enter(`space`),e.consume(t),e.exit(`space`),c):t===96?(a=e.enter(`codeTextSequence`),i=0,u(t)):y7(t)?(e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),c):(e.enter(`codeTextData`),l(t))}function l(t){return t===null||t===32||t===96||y7(t)?(e.exit(`codeTextData`),c(t)):(e.consume(t),l)}function u(n){return n===96?(e.consume(n),i++,u):i===r?(e.exit(`codeTextSequence`),e.exit(`codeText`),t(n)):(a.type=`codeTextData`,l(n))}}var UJe=class{constructor(e){this.left=e?[...e]:[],this.right=[]}get(e){if(e<0||e>=this.left.length+this.right.length)throw RangeError("Cannot access index `"+e+"` in a splice buffer of size `"+(this.left.length+this.right.length)+"`");return e<this.left.length?this.left[e]:this.right[this.right.length-e+this.left.length-1]}get length(){return this.left.length+this.right.length}shift(){return this.setCursor(0),this.right.pop()}slice(e,t){let n=t??1/0;return n<this.left.length?this.left.slice(e,n):e>this.left.length?this.right.slice(this.right.length-n+this.left.length,this.right.length-e+this.left.length).reverse():this.left.slice(e).concat(this.right.slice(this.right.length-n+this.left.length).reverse())}splice(e,t,n){let r=t||0;this.setCursor(Math.trunc(e));let i=this.right.splice(this.right.length-r,1/0);return n&&A7(this.left,n),i.reverse()}pop(){return this.setCursor(1/0),this.left.pop()}push(e){this.setCursor(1/0),this.left.push(e)}pushMany(e){this.setCursor(1/0),A7(this.left,e)}unshift(e){this.setCursor(0),this.right.push(e)}unshiftMany(e){this.setCursor(0),A7(this.right,e.reverse())}setCursor(e){if(!(e===this.left.length||e>this.left.length&&this.right.length===0||e<0&&this.left.length===0))if(e<this.left.length){let t=this.left.splice(e,1/0);A7(this.right,t.reverse())}else{let t=this.right.splice(this.left.length+this.right.length-e,1/0);A7(this.left,t.reverse())}}};function A7(e,t){let n=0;if(t.length<1e4)e.push(...t);else for(;n<t.length;)e.push(...t.slice(n,n+1e4)),n+=1e4}function WJe(e){let t={},n=-1,r,i,a,o,s,c,l,u=new UJe(e);for(;++n<u.length;){for(;n in t;)n=t[n];if(r=u.get(n),n&&r[1].type===`chunkFlow`&&u.get(n-1)[1].type===`listItemPrefix`&&(c=r[1]._tokenizer.events,a=0,a<c.length&&c[a][1].type===`lineEndingBlank`&&(a+=2),a<c.length&&c[a][1].type===`content`))for(;++a<c.length&&c[a][1].type!==`content`;)c[a][1].type===`chunkText`&&(c[a][1]._isInFirstContentOfListItem=!0,a++);if(r[0]===`enter`)r[1].contentType&&(Object.assign(t,GJe(u,n)),n=t[n],l=!0);else if(r[1]._container){for(a=n,i=void 0;a--;)if(o=u.get(a),o[1].type===`lineEnding`||o[1].type===`lineEndingBlank`)o[0]===`enter`&&(i&&(u.get(i)[1].type=`lineEndingBlank`),o[1].type=`lineEnding`,i=a);else if(!(o[1].type===`linePrefix`||o[1].type===`listItemIndent`))break;i&&(r[1].end={...u.get(i)[1].start},s=u.slice(i,n),s.unshift(r),u.splice(i,n-i+1,s))}}return f7(e,0,1/0,u.slice(0)),!l}function GJe(e,t){let n=e.get(t)[1],r=e.get(t)[2],i=t-1,a=[],o=n._tokenizer;o||(o=r.parser[n.contentType](n.start),n._contentTypeTextTrailing&&(o._contentTypeTextTrailing=!0));let s=o.events,c=[],l={},u,d,f=-1,p=n,m=0,h=0,g=[h];for(;p;){for(;e.get(++i)[1]!==p;);a.push(i),p._tokenizer||(u=r.sliceStream(p),p.next||u.push(null),d&&o.defineSkip(p.start),p._isInFirstContentOfListItem&&(o._gfmTasklistFirstContentOfListItem=!0),o.write(u),p._isInFirstContentOfListItem&&(o._gfmTasklistFirstContentOfListItem=void 0)),d=p,p=p.next}for(p=n;++f<s.length;)s[f][0]===`exit`&&s[f-1][0]===`enter`&&s[f][1].type===s[f-1][1].type&&s[f][1].start.line!==s[f][1].end.line&&(h=f+1,g.push(h),p._tokenizer=void 0,p.previous=void 0,p=p.next);for(o.events=[],p?(p._tokenizer=void 0,p.previous=void 0):g.pop(),f=g.length;f--;){let t=s.slice(g[f],g[f+1]),n=a.pop();c.push([n,n+t.length-1]),e.splice(n,2,t)}for(c.reverse(),f=-1;++f<c.length;)l[m+c[f][0]]=m+c[f][1],m+=c[f][1]-c[f][0]-1;return l}var KJe={resolve:JJe,tokenize:YJe},qJe={partial:!0,tokenize:XJe};function JJe(e){return WJe(e),e}function YJe(e,t){let n;return r;function r(t){return e.enter(`content`),n=e.enter(`chunkContent`,{contentType:`content`}),i(t)}function i(t){return t===null?a(t):y7(t)?e.check(qJe,o,a)(t):(e.consume(t),i)}function a(n){return e.exit(`chunkContent`),e.exit(`content`),t(n)}function o(t){return e.consume(t),e.exit(`chunkContent`),n.next=e.enter(`chunkContent`,{contentType:`content`,previous:n}),n=n.next,i}}function XJe(e,t,n){let r=this;return i;function i(t){return e.exit(`chunkContent`),e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),w7(e,a,`linePrefix`)}function a(i){if(i===null||y7(i))return n(i);let a=r.events[r.events.length-1];return!r.parser.constructs.disable.null.includes(`codeIndented`)&&a&&a[1].type===`linePrefix`&&a[2].sliceSerialize(a[1],!0).length>=4?t(i):e.interrupt(r.parser.constructs.flow,n,t)(i)}}function ZJe(e,t,n,r,i,a,o,s,c){let l=c||1/0,u=0;return d;function d(t){return t===60?(e.enter(r),e.enter(i),e.enter(a),e.consume(t),e.exit(a),f):t===null||t===32||t===41||_7(t)?n(t):(e.enter(r),e.enter(o),e.enter(s),e.enter(`chunkString`,{contentType:`string`}),h(t))}function f(n){return n===62?(e.enter(a),e.consume(n),e.exit(a),e.exit(i),e.exit(r),t):(e.enter(s),e.enter(`chunkString`,{contentType:`string`}),p(n))}function p(t){return t===62?(e.exit(`chunkString`),e.exit(s),f(t)):t===null||t===60||y7(t)?n(t):(e.consume(t),t===92?m:p)}function m(t){return t===60||t===62||t===92?(e.consume(t),p):p(t)}function h(i){return!u&&(i===null||i===41||b7(i))?(e.exit(`chunkString`),e.exit(s),e.exit(o),e.exit(r),t(i)):u<l&&i===40?(e.consume(i),u++,h):i===41?(e.consume(i),u--,h):i===null||i===32||i===40||_7(i)?n(i):(e.consume(i),i===92?g:h)}function g(t){return t===40||t===41||t===92?(e.consume(t),h):h(t)}}function QJe(e,t,n,r,i,a){let o=this,s=0,c;return l;function l(t){return e.enter(r),e.enter(i),e.consume(t),e.exit(i),e.enter(a),u}function u(l){return s>999||l===null||l===91||l===93&&!c||l===94&&!s&&`_hiddenFootnoteSupport`in o.parser.constructs?n(l):l===93?(e.exit(a),e.enter(i),e.consume(l),e.exit(i),e.exit(r),t):y7(l)?(e.enter(`lineEnding`),e.consume(l),e.exit(`lineEnding`),u):(e.enter(`chunkString`,{contentType:`string`}),d(l))}function d(t){return t===null||t===91||t===93||y7(t)||s++>999?(e.exit(`chunkString`),u(t)):(e.consume(t),c||=!x7(t),t===92?f:d)}function f(t){return t===91||t===92||t===93?(e.consume(t),s++,d):d(t)}}function $Je(e,t,n,r,i,a){let o;return s;function s(t){return t===34||t===39||t===40?(e.enter(r),e.enter(i),e.consume(t),e.exit(i),o=t===40?41:t,c):n(t)}function c(n){return n===o?(e.enter(i),e.consume(n),e.exit(i),e.exit(r),t):(e.enter(a),l(n))}function l(t){return t===o?(e.exit(a),c(o)):t===null?n(t):y7(t)?(e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),w7(e,l,`linePrefix`)):(e.enter(`chunkString`,{contentType:`string`}),u(t))}function u(t){return t===o||t===null||y7(t)?(e.exit(`chunkString`),l(t)):(e.consume(t),t===92?d:u)}function d(t){return t===o||t===92?(e.consume(t),u):u(t)}}function j7(e,t){let n;return r;function r(i){return y7(i)?(e.enter(`lineEnding`),e.consume(i),e.exit(`lineEnding`),n=!0,r):x7(i)?w7(e,r,n?`linePrefix`:`lineSuffix`)(i):t(i)}}var eYe={name:`definition`,tokenize:nYe},tYe={partial:!0,tokenize:rYe};function nYe(e,t,n){let r=this,i;return a;function a(t){return e.enter(`definition`),o(t)}function o(t){return QJe.call(r,e,s,n,`definitionLabel`,`definitionLabelMarker`,`definitionLabelString`)(t)}function s(t){return i=m7(r.sliceSerialize(r.events[r.events.length-1][1]).slice(1,-1)),t===58?(e.enter(`definitionMarker`),e.consume(t),e.exit(`definitionMarker`),c):n(t)}function c(t){return b7(t)?j7(e,l)(t):l(t)}function l(t){return ZJe(e,u,n,`definitionDestination`,`definitionDestinationLiteral`,`definitionDestinationLiteralMarker`,`definitionDestinationRaw`,`definitionDestinationString`)(t)}function u(t){return e.attempt(tYe,d,d)(t)}function d(t){return x7(t)?w7(e,f,`whitespace`)(t):f(t)}function f(a){return a===null||y7(a)?(e.exit(`definition`),r.parser.defined.push(i),t(a)):n(a)}}function rYe(e,t,n){return r;function r(t){return b7(t)?j7(e,i)(t):n(t)}function i(t){return $Je(e,a,n,`definitionTitle`,`definitionTitleMarker`,`definitionTitleString`)(t)}function a(t){return x7(t)?w7(e,o,`whitespace`)(t):o(t)}function o(e){return e===null||y7(e)?t(e):n(e)}}var iYe={name:`hardBreakEscape`,tokenize:aYe};function aYe(e,t,n){return r;function r(t){return e.enter(`hardBreakEscape`),e.consume(t),i}function i(r){return y7(r)?(e.exit(`hardBreakEscape`),t(r)):n(r)}}var oYe={name:`headingAtx`,resolve:sYe,tokenize:cYe};function sYe(e,t){let n=e.length-2,r=3,i,a;return e[r][1].type===`whitespace`&&(r+=2),n-2>r&&e[n][1].type===`whitespace`&&(n-=2),e[n][1].type===`atxHeadingSequence`&&(r===n-1||n-4>r&&e[n-2][1].type===`whitespace`)&&(n-=r+1===n?2:4),n>r&&(i={type:`atxHeadingText`,start:e[r][1].start,end:e[n][1].end},a={type:`chunkText`,start:e[r][1].start,end:e[n][1].end,contentType:`text`},f7(e,r,n-r+1,[[`enter`,i,t],[`enter`,a,t],[`exit`,a,t],[`exit`,i,t]])),e}function cYe(e,t,n){let r=0;return i;function i(t){return e.enter(`atxHeading`),a(t)}function a(t){return e.enter(`atxHeadingSequence`),o(t)}function o(t){return t===35&&r++<6?(e.consume(t),o):t===null||b7(t)?(e.exit(`atxHeadingSequence`),s(t)):n(t)}function s(n){return n===35?(e.enter(`atxHeadingSequence`),c(n)):n===null||y7(n)?(e.exit(`atxHeading`),t(n)):x7(n)?w7(e,s,`whitespace`)(n):(e.enter(`atxHeadingText`),l(n))}function c(t){return t===35?(e.consume(t),c):(e.exit(`atxHeadingSequence`),s(t))}function l(t){return t===null||t===35||b7(t)?(e.exit(`atxHeadingText`),s(t)):(e.consume(t),l)}}var lYe=`address.article.aside.base.basefont.blockquote.body.caption.center.col.colgroup.dd.details.dialog.dir.div.dl.dt.fieldset.figcaption.figure.footer.form.frame.frameset.h1.h2.h3.h4.h5.h6.head.header.hr.html.iframe.legend.li.link.main.menu.menuitem.nav.noframes.ol.optgroup.option.p.param.search.section.summary.table.tbody.td.tfoot.th.thead.title.tr.track.ul`.split(`.`),uYe=[`pre`,`script`,`style`,`textarea`],dYe={concrete:!0,name:`htmlFlow`,resolveTo:mYe,tokenize:hYe},fYe={partial:!0,tokenize:_Ye},pYe={partial:!0,tokenize:gYe};function mYe(e){let t=e.length;for(;t--&&!(e[t][0]===`enter`&&e[t][1].type===`htmlFlow`););return t>1&&e[t-2][1].type===`linePrefix`&&(e[t][1].start=e[t-2][1].start,e[t+1][1].start=e[t-2][1].start,e.splice(t-2,2)),e}function hYe(e,t,n){let r=this,i,a,o,s,c;return l;function l(e){return u(e)}function u(t){return e.enter(`htmlFlow`),e.enter(`htmlFlowData`),e.consume(t),d}function d(s){return s===33?(e.consume(s),f):s===47?(e.consume(s),a=!0,h):s===63?(e.consume(s),i=3,r.interrupt?t:I):h7(s)?(e.consume(s),o=String.fromCharCode(s),g):n(s)}function f(a){return a===45?(e.consume(a),i=2,p):a===91?(e.consume(a),i=5,s=0,m):h7(a)?(e.consume(a),i=4,r.interrupt?t:I):n(a)}function p(i){return i===45?(e.consume(i),r.interrupt?t:I):n(i)}function m(i){return i===`CDATA[`.charCodeAt(s++)?(e.consume(i),s===6?r.interrupt?t:O:m):n(i)}function h(t){return h7(t)?(e.consume(t),o=String.fromCharCode(t),g):n(t)}function g(s){if(s===null||s===47||s===62||b7(s)){let c=s===47,l=o.toLowerCase();return!c&&!a&&uYe.includes(l)?(i=1,r.interrupt?t(s):O(s)):lYe.includes(o.toLowerCase())?(i=6,c?(e.consume(s),_):r.interrupt?t(s):O(s)):(i=7,r.interrupt&&!r.parser.lazy[r.now().line]?n(s):a?v(s):y(s))}return s===45||g7(s)?(e.consume(s),o+=String.fromCharCode(s),g):n(s)}function _(i){return i===62?(e.consume(i),r.interrupt?t:O):n(i)}function v(t){return x7(t)?(e.consume(t),v):E(t)}function y(t){return t===47?(e.consume(t),E):t===58||t===95||h7(t)?(e.consume(t),b):x7(t)?(e.consume(t),y):E(t)}function b(t){return t===45||t===46||t===58||t===95||g7(t)?(e.consume(t),b):x(t)}function x(t){return t===61?(e.consume(t),S):x7(t)?(e.consume(t),x):y(t)}function S(t){return t===null||t===60||t===61||t===62||t===96?n(t):t===34||t===39?(e.consume(t),c=t,C):x7(t)?(e.consume(t),S):w(t)}function C(t){return t===c?(e.consume(t),c=null,T):t===null||y7(t)?n(t):(e.consume(t),C)}function w(t){return t===null||t===34||t===39||t===47||t===60||t===61||t===62||t===96||b7(t)?x(t):(e.consume(t),w)}function T(e){return e===47||e===62||x7(e)?y(e):n(e)}function E(t){return t===62?(e.consume(t),D):n(t)}function D(t){return t===null||y7(t)?O(t):x7(t)?(e.consume(t),D):n(t)}function O(t){return t===45&&i===2?(e.consume(t),M):t===60&&i===1?(e.consume(t),N):t===62&&i===4?(e.consume(t),L):t===63&&i===3?(e.consume(t),I):t===93&&i===5?(e.consume(t),F):y7(t)&&(i===6||i===7)?(e.exit(`htmlFlowData`),e.check(fYe,R,k)(t)):t===null||y7(t)?(e.exit(`htmlFlowData`),k(t)):(e.consume(t),O)}function k(t){return e.check(pYe,A,R)(t)}function A(t){return e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),j}function j(t){return t===null||y7(t)?k(t):(e.enter(`htmlFlowData`),O(t))}function M(t){return t===45?(e.consume(t),I):O(t)}function N(t){return t===47?(e.consume(t),o=``,P):O(t)}function P(t){if(t===62){let n=o.toLowerCase();return uYe.includes(n)?(e.consume(t),L):O(t)}return h7(t)&&o.length<8?(e.consume(t),o+=String.fromCharCode(t),P):O(t)}function F(t){return t===93?(e.consume(t),I):O(t)}function I(t){return t===62?(e.consume(t),L):t===45&&i===2?(e.consume(t),I):O(t)}function L(t){return t===null||y7(t)?(e.exit(`htmlFlowData`),R(t)):(e.consume(t),L)}function R(n){return e.exit(`htmlFlow`),t(n)}}function gYe(e,t,n){let r=this;return i;function i(t){return y7(t)?(e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),a):n(t)}function a(e){return r.parser.lazy[r.now().line]?n(e):t(e)}}function _Ye(e,t,n){return r;function r(r){return e.enter(`lineEnding`),e.consume(r),e.exit(`lineEnding`),e.attempt(O7,t,n)}}var vYe={name:`htmlText`,tokenize:yYe};function yYe(e,t,n){let r=this,i,a,o;return s;function s(t){return e.enter(`htmlText`),e.enter(`htmlTextData`),e.consume(t),c}function c(t){return t===33?(e.consume(t),l):t===47?(e.consume(t),x):t===63?(e.consume(t),y):h7(t)?(e.consume(t),w):n(t)}function l(t){return t===45?(e.consume(t),u):t===91?(e.consume(t),a=0,m):h7(t)?(e.consume(t),v):n(t)}function u(t){return t===45?(e.consume(t),p):n(t)}function d(t){return t===null?n(t):t===45?(e.consume(t),f):y7(t)?(o=d,N(t)):(e.consume(t),d)}function f(t){return t===45?(e.consume(t),p):d(t)}function p(e){return e===62?M(e):e===45?f(e):d(e)}function m(t){return t===`CDATA[`.charCodeAt(a++)?(e.consume(t),a===6?h:m):n(t)}function h(t){return t===null?n(t):t===93?(e.consume(t),g):y7(t)?(o=h,N(t)):(e.consume(t),h)}function g(t){return t===93?(e.consume(t),_):h(t)}function _(t){return t===62?M(t):t===93?(e.consume(t),_):h(t)}function v(t){return t===null||t===62?M(t):y7(t)?(o=v,N(t)):(e.consume(t),v)}function y(t){return t===null?n(t):t===63?(e.consume(t),b):y7(t)?(o=y,N(t)):(e.consume(t),y)}function b(e){return e===62?M(e):y(e)}function x(t){return h7(t)?(e.consume(t),S):n(t)}function S(t){return t===45||g7(t)?(e.consume(t),S):C(t)}function C(t){return y7(t)?(o=C,N(t)):x7(t)?(e.consume(t),C):M(t)}function w(t){return t===45||g7(t)?(e.consume(t),w):t===47||t===62||b7(t)?T(t):n(t)}function T(t){return t===47?(e.consume(t),M):t===58||t===95||h7(t)?(e.consume(t),E):y7(t)?(o=T,N(t)):x7(t)?(e.consume(t),T):M(t)}function E(t){return t===45||t===46||t===58||t===95||g7(t)?(e.consume(t),E):D(t)}function D(t){return t===61?(e.consume(t),O):y7(t)?(o=D,N(t)):x7(t)?(e.consume(t),D):T(t)}function O(t){return t===null||t===60||t===61||t===62||t===96?n(t):t===34||t===39?(e.consume(t),i=t,k):y7(t)?(o=O,N(t)):x7(t)?(e.consume(t),O):(e.consume(t),A)}function k(t){return t===i?(e.consume(t),i=void 0,j):t===null?n(t):y7(t)?(o=k,N(t)):(e.consume(t),k)}function A(t){return t===null||t===34||t===39||t===60||t===61||t===96?n(t):t===47||t===62||b7(t)?T(t):(e.consume(t),A)}function j(e){return e===47||e===62||b7(e)?T(e):n(e)}function M(r){return r===62?(e.consume(r),e.exit(`htmlTextData`),e.exit(`htmlText`),t):n(r)}function N(t){return e.exit(`htmlTextData`),e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),P}function P(t){return x7(t)?w7(e,F,`linePrefix`,r.parser.constructs.disable.null.includes(`codeIndented`)?void 0:4)(t):F(t)}function F(t){return e.enter(`htmlTextData`),o(t)}}var M7={name:`labelEnd`,resolveAll:CYe,resolveTo:wYe,tokenize:TYe},bYe={tokenize:EYe},xYe={tokenize:DYe},SYe={tokenize:OYe};function CYe(e){let t=-1,n=[];for(;++t<e.length;){let r=e[t][1];if(n.push(e[t]),r.type===`labelImage`||r.type===`labelLink`||r.type===`labelEnd`){let e=r.type===`labelImage`?4:2;r.type=`data`,t+=e}}return e.length!==n.length&&f7(e,0,e.length,n),e}function wYe(e,t){let n=e.length,r=0,i,a,o,s;for(;n--;)if(i=e[n][1],a){if(i.type===`link`||i.type===`labelLink`&&i._inactive)break;e[n][0]===`enter`&&i.type===`labelLink`&&(i._inactive=!0)}else if(o){if(e[n][0]===`enter`&&(i.type===`labelImage`||i.type===`labelLink`)&&!i._balanced&&(a=n,i.type!==`labelLink`)){r=2;break}}else i.type===`labelEnd`&&(o=n);let c={type:e[a][1].type===`labelLink`?`link`:`image`,start:{...e[a][1].start},end:{...e[e.length-1][1].end}},l={type:`label`,start:{...e[a][1].start},end:{...e[o][1].end}},u={type:`labelText`,start:{...e[a+r+2][1].end},end:{...e[o-2][1].start}};return s=[[`enter`,c,t],[`enter`,l,t]],s=p7(s,e.slice(a+1,a+r+3)),s=p7(s,[[`enter`,u,t]]),s=p7(s,E7(t.parser.constructs.insideSpan.null,e.slice(a+r+4,o-3),t)),s=p7(s,[[`exit`,u,t],e[o-2],e[o-1],[`exit`,l,t]]),s=p7(s,e.slice(o+1)),s=p7(s,[[`exit`,c,t]]),f7(e,a,e.length,s),e}function TYe(e,t,n){let r=this,i=r.events.length,a,o;for(;i--;)if((r.events[i][1].type===`labelImage`||r.events[i][1].type===`labelLink`)&&!r.events[i][1]._balanced){a=r.events[i][1];break}return s;function s(t){return a?a._inactive?d(t):(o=r.parser.defined.includes(m7(r.sliceSerialize({start:a.end,end:r.now()}))),e.enter(`labelEnd`),e.enter(`labelMarker`),e.consume(t),e.exit(`labelMarker`),e.exit(`labelEnd`),c):n(t)}function c(t){return t===40?e.attempt(bYe,u,o?u:d)(t):t===91?e.attempt(xYe,u,o?l:d)(t):o?u(t):d(t)}function l(t){return e.attempt(SYe,u,d)(t)}function u(e){return t(e)}function d(e){return a._balanced=!0,n(e)}}function EYe(e,t,n){return r;function r(t){return e.enter(`resource`),e.enter(`resourceMarker`),e.consume(t),e.exit(`resourceMarker`),i}function i(t){return b7(t)?j7(e,a)(t):a(t)}function a(t){return t===41?u(t):ZJe(e,o,s,`resourceDestination`,`resourceDestinationLiteral`,`resourceDestinationLiteralMarker`,`resourceDestinationRaw`,`resourceDestinationString`,32)(t)}function o(t){return b7(t)?j7(e,c)(t):u(t)}function s(e){return n(e)}function c(t){return t===34||t===39||t===40?$Je(e,l,n,`resourceTitle`,`resourceTitleMarker`,`resourceTitleString`)(t):u(t)}function l(t){return b7(t)?j7(e,u)(t):u(t)}function u(r){return r===41?(e.enter(`resourceMarker`),e.consume(r),e.exit(`resourceMarker`),e.exit(`resource`),t):n(r)}}function DYe(e,t,n){let r=this;return i;function i(t){return QJe.call(r,e,a,o,`reference`,`referenceMarker`,`referenceString`)(t)}function a(e){return r.parser.defined.includes(m7(r.sliceSerialize(r.events[r.events.length-1][1]).slice(1,-1)))?t(e):n(e)}function o(e){return n(e)}}function OYe(e,t,n){return r;function r(t){return e.enter(`reference`),e.enter(`referenceMarker`),e.consume(t),e.exit(`referenceMarker`),i}function i(r){return r===93?(e.enter(`referenceMarker`),e.consume(r),e.exit(`referenceMarker`),e.exit(`reference`),t):n(r)}}var kYe={name:`labelStartImage`,resolveAll:M7.resolveAll,tokenize:AYe};function AYe(e,t,n){let r=this;return i;function i(t){return e.enter(`labelImage`),e.enter(`labelImageMarker`),e.consume(t),e.exit(`labelImageMarker`),a}function a(t){return t===91?(e.enter(`labelMarker`),e.consume(t),e.exit(`labelMarker`),e.exit(`labelImage`),o):n(t)}function o(e){return e===94&&`_hiddenFootnoteSupport`in r.parser.constructs?n(e):t(e)}}var jYe={name:`labelStartLink`,resolveAll:M7.resolveAll,tokenize:MYe};function MYe(e,t,n){let r=this;return i;function i(t){return e.enter(`labelLink`),e.enter(`labelMarker`),e.consume(t),e.exit(`labelMarker`),e.exit(`labelLink`),a}function a(e){return e===94&&`_hiddenFootnoteSupport`in r.parser.constructs?n(e):t(e)}}var N7={name:`lineEnding`,tokenize:NYe};function NYe(e,t){return n;function n(n){return e.enter(`lineEnding`),e.consume(n),e.exit(`lineEnding`),w7(e,t,`linePrefix`)}}var P7={name:`thematicBreak`,tokenize:PYe};function PYe(e,t,n){let r=0,i;return a;function a(t){return e.enter(`thematicBreak`),o(t)}function o(e){return i=e,s(e)}function s(a){return a===i?(e.enter(`thematicBreakSequence`),c(a)):r>=3&&(a===null||y7(a))?(e.exit(`thematicBreak`),t(a)):n(a)}function c(t){return t===i?(e.consume(t),r++,c):(e.exit(`thematicBreakSequence`),x7(t)?w7(e,s,`whitespace`)(t):s(t))}}var F7={continuation:{tokenize:RYe},exit:BYe,name:`list`,tokenize:LYe},FYe={partial:!0,tokenize:VYe},IYe={partial:!0,tokenize:zYe};function LYe(e,t,n){let r=this,i=r.events[r.events.length-1],a=i&&i[1].type===`linePrefix`?i[2].sliceSerialize(i[1],!0).length:0,o=0;return s;function s(t){let i=r.containerState.type||(t===42||t===43||t===45?`listUnordered`:`listOrdered`);if(i===`listUnordered`?!r.containerState.marker||t===r.containerState.marker:v7(t)){if(r.containerState.type||(r.containerState.type=i,e.enter(i,{_container:!0})),i===`listUnordered`)return e.enter(`listItemPrefix`),t===42||t===45?e.check(P7,n,l)(t):l(t);if(!r.interrupt||t===49)return e.enter(`listItemPrefix`),e.enter(`listItemValue`),c(t)}return n(t)}function c(t){return v7(t)&&++o<10?(e.consume(t),c):(!r.interrupt||o<2)&&(r.containerState.marker?t===r.containerState.marker:t===41||t===46)?(e.exit(`listItemValue`),l(t)):n(t)}function l(t){return e.enter(`listItemMarker`),e.consume(t),e.exit(`listItemMarker`),r.containerState.marker=r.containerState.marker||t,e.check(O7,r.interrupt?n:u,e.attempt(FYe,f,d))}function u(e){return r.containerState.initialBlankLine=!0,a++,f(e)}function d(t){return x7(t)?(e.enter(`listItemPrefixWhitespace`),e.consume(t),e.exit(`listItemPrefixWhitespace`),f):n(t)}function f(n){return r.containerState.size=a+r.sliceSerialize(e.exit(`listItemPrefix`),!0).length,t(n)}}function RYe(e,t,n){let r=this;return r.containerState._closeFlow=void 0,e.check(O7,i,a);function i(n){return r.containerState.furtherBlankLines=r.containerState.furtherBlankLines||r.containerState.initialBlankLine,w7(e,t,`listItemIndent`,r.containerState.size+1)(n)}function a(n){return r.containerState.furtherBlankLines||!x7(n)?(r.containerState.furtherBlankLines=void 0,r.containerState.initialBlankLine=void 0,o(n)):(r.containerState.furtherBlankLines=void 0,r.containerState.initialBlankLine=void 0,e.attempt(IYe,t,o)(n))}function o(i){return r.containerState._closeFlow=!0,r.interrupt=void 0,w7(e,e.attempt(F7,t,n),`linePrefix`,r.parser.constructs.disable.null.includes(`codeIndented`)?void 0:4)(i)}}function zYe(e,t,n){let r=this;return w7(e,i,`listItemIndent`,r.containerState.size+1);function i(e){let i=r.events[r.events.length-1];return i&&i[1].type===`listItemIndent`&&i[2].sliceSerialize(i[1],!0).length===r.containerState.size?t(e):n(e)}}function BYe(e){e.exit(this.containerState.type)}function VYe(e,t,n){let r=this;return w7(e,i,`listItemPrefixWhitespace`,r.parser.constructs.disable.null.includes(`codeIndented`)?void 0:5);function i(e){let i=r.events[r.events.length-1];return!x7(e)&&i&&i[1].type===`listItemPrefixWhitespace`?t(e):n(e)}}var HYe={name:`setextUnderline`,resolveTo:UYe,tokenize:WYe};function UYe(e,t){let n=e.length,r,i,a;for(;n--;)if(e[n][0]===`enter`){if(e[n][1].type===`content`){r=n;break}e[n][1].type===`paragraph`&&(i=n)}else e[n][1].type===`content`&&e.splice(n,1),!a&&e[n][1].type===`definition`&&(a=n);let o={type:`setextHeading`,start:{...e[r][1].start},end:{...e[e.length-1][1].end}};return e[i][1].type=`setextHeadingText`,a?(e.splice(i,0,[`enter`,o,t]),e.splice(a+1,0,[`exit`,e[r][1],t]),e[r][1].end={...e[a][1].end}):e[r][1]=o,e.push([`exit`,o,t]),e}function WYe(e,t,n){let r=this,i;return a;function a(t){let a=r.events.length,s;for(;a--;)if(r.events[a][1].type!==`lineEnding`&&r.events[a][1].type!==`linePrefix`&&r.events[a][1].type!==`content`){s=r.events[a][1].type===`paragraph`;break}return!r.parser.lazy[r.now().line]&&(r.interrupt||s)?(e.enter(`setextHeadingLine`),i=t,o(t)):n(t)}function o(t){return e.enter(`setextHeadingLineSequence`),s(t)}function s(t){return t===i?(e.consume(t),s):(e.exit(`setextHeadingLineSequence`),x7(t)?w7(e,c,`lineSuffix`)(t):c(t))}function c(r){return r===null||y7(r)?(e.exit(`setextHeadingLine`),t(r)):n(r)}}var GYe={tokenize:KYe};function KYe(e){let t=this,n=e.attempt(O7,r,e.attempt(this.parser.constructs.flowInitial,i,w7(e,e.attempt(this.parser.constructs.flow,i,e.attempt(KJe,i)),`linePrefix`)));return n;function r(r){if(r===null){e.consume(r);return}return e.enter(`lineEndingBlank`),e.consume(r),e.exit(`lineEndingBlank`),t.currentConstruct=void 0,n}function i(r){if(r===null){e.consume(r);return}return e.enter(`lineEnding`),e.consume(r),e.exit(`lineEnding`),t.currentConstruct=void 0,n}}var qYe={resolveAll:ZYe()},JYe=XYe(`string`),YYe=XYe(`text`);function XYe(e){return{resolveAll:ZYe(e===`text`?QYe:void 0),tokenize:t};function t(t){let n=this,r=this.parser.constructs[e],i=t.attempt(r,a,o);return a;function a(e){return c(e)?i(e):o(e)}function o(e){if(e===null){t.consume(e);return}return t.enter(`data`),t.consume(e),s}function s(e){return c(e)?(t.exit(`data`),i(e)):(t.consume(e),s)}function c(e){if(e===null)return!0;let t=r[e],i=-1;if(t)for(;++i<t.length;){let e=t[i];if(!e.previous||e.previous.call(n,n.previous))return!0}return!1}}}function ZYe(e){return t;function t(t,n){let r=-1,i;for(;++r<=t.length;)i===void 0?t[r]&&t[r][1].type===`data`&&(i=r,r++):(!t[r]||t[r][1].type!==`data`)&&(r!==i+2&&(t[i][1].end=t[r-1][1].end,t.splice(i+2,r-i-2),r=i+2),i=void 0);return e?e(t,n):t}}function QYe(e,t){let n=0;for(;++n<=e.length;)if((n===e.length||e[n][1].type===`lineEnding`)&&e[n-1][1].type===`data`){let r=e[n-1][1],i=t.sliceStream(r),a=i.length,o=-1,s=0,c;for(;a--;){let e=i[a];if(typeof e==`string`){for(o=e.length;e.charCodeAt(o-1)===32;)s++,o--;if(o)break;o=-1}else if(e===-2)c=!0,s++;else if(e!==-1){a++;break}}if(t._contentTypeTextTrailing&&n===e.length&&(s=0),s){let i={type:n===e.length||c||s<2?`lineSuffix`:`hardBreakTrailing`,start:{_bufferIndex:a?o:r.start._bufferIndex+o,_index:r.start._index+a,line:r.end.line,column:r.end.column-s,offset:r.end.offset-s},end:{...r.end}};r.end={...i.start},r.start.offset===r.end.offset?Object.assign(r,i):(e.splice(n,0,[`enter`,i,t],[`exit`,i,t]),n+=2)}n++}return e}var $Ye=s({attentionMarkers:()=>sXe,contentInitial:()=>tXe,disable:()=>cXe,document:()=>eXe,flow:()=>rXe,flowInitial:()=>nXe,insideSpan:()=>oXe,string:()=>iXe,text:()=>aXe}),eXe={42:F7,43:F7,45:F7,48:F7,49:F7,50:F7,51:F7,52:F7,53:F7,54:F7,55:F7,56:F7,57:F7,62:wJe},tXe={91:eYe},nXe={[-2]:k7,[-1]:k7,32:k7},rXe={35:oYe,42:P7,45:[HYe,P7],60:dYe,61:HYe,95:P7,96:NJe,126:NJe},iXe={38:AJe,92:OJe},aXe={[-5]:N7,[-4]:N7,[-3]:N7,33:kYe,38:AJe,42:D7,60:[xJe,vYe],91:jYe,92:[iYe,OJe],93:M7,95:D7,96:zJe},oXe={null:[D7,qYe]},sXe={null:[42,95]},cXe={null:[]};function lXe(e,t,n){let r={_bufferIndex:-1,_index:0,line:n&&n.line||1,column:n&&n.column||1,offset:n&&n.offset||0},i={},a=[],o=[],s=[],c={attempt:C(x),check:C(S),consume:v,enter:y,exit:b,interrupt:C(S,{interrupt:!0})},l={code:null,containerState:{},defineSkip:h,events:[],now:m,parser:e,previous:null,sliceSerialize:f,sliceStream:p,write:d},u=t.tokenize.call(l,c);return t.resolveAll&&a.push(t),l;function d(e){return o=p7(o,e),g(),o[o.length-1]===null?(w(t,0),l.events=E7(a,l.events,l),l.events):[]}function f(e,t){return dXe(p(e),t)}function p(e){return uXe(o,e)}function m(){let{_bufferIndex:e,_index:t,line:n,column:i,offset:a}=r;return{_bufferIndex:e,_index:t,line:n,column:i,offset:a}}function h(e){i[e.line]=e.column,E()}function g(){let e;for(;r._index<o.length;){let t=o[r._index];if(typeof t==`string`)for(e=r._index,r._bufferIndex<0&&(r._bufferIndex=0);r._index===e&&r._bufferIndex<t.length;)_(t.charCodeAt(r._bufferIndex));else _(t)}}function _(e){u=u(e)}function v(e){y7(e)?(r.line++,r.column=1,r.offset+=e===-3?2:1,E()):e!==-1&&(r.column++,r.offset++),r._bufferIndex<0?r._index++:(r._bufferIndex++,r._bufferIndex===o[r._index].length&&(r._bufferIndex=-1,r._index++)),l.previous=e}function y(e,t){let n=t||{};return n.type=e,n.start=m(),l.events.push([`enter`,n,l]),s.push(n),n}function b(e){let t=s.pop();return t.end=m(),l.events.push([`exit`,t,l]),t}function x(e,t){w(e,t.from)}function S(e,t){t.restore()}function C(e,t){return n;function n(n,r,i){let a,o,s,u;return Array.isArray(n)?f(n):`tokenize`in n?f([n]):d(n);function d(e){return t;function t(t){let n=t!==null&&e[t],r=t!==null&&e.null;return f([...Array.isArray(n)?n:n?[n]:[],...Array.isArray(r)?r:r?[r]:[]])(t)}}function f(e){return a=e,o=0,e.length===0?i:p(e[o])}function p(e){return n;function n(n){return u=T(),s=e,e.partial||(l.currentConstruct=e),e.name&&l.parser.constructs.disable.null.includes(e.name)?h(n):e.tokenize.call(t?Object.assign(Object.create(l),t):l,c,m,h)(n)}}function m(t){return e(s,u),r}function h(e){return u.restore(),++o<a.length?p(a[o]):i}}}function w(e,t){e.resolveAll&&!a.includes(e)&&a.push(e),e.resolve&&f7(l.events,t,l.events.length-t,e.resolve(l.events.slice(t),l)),e.resolveTo&&(l.events=e.resolveTo(l.events,l))}function T(){let e=m(),t=l.previous,n=l.currentConstruct,i=l.events.length,a=Array.from(s);return{from:i,restore:o};function o(){r=e,l.previous=t,l.currentConstruct=n,l.events.length=i,s=a,E()}}function E(){r.line in i&&r.column<2&&(r.column=i[r.line],r.offset+=i[r.line]-1)}}function uXe(e,t){let n=t.start._index,r=t.start._bufferIndex,i=t.end._index,a=t.end._bufferIndex,o;if(n===i)o=[e[n].slice(r,a)];else{if(o=e.slice(n,i),r>-1){let e=o[0];typeof e==`string`?o[0]=e.slice(r):o.shift()}a>0&&o.push(e[i].slice(0,a))}return o}function dXe(e,t){let n=-1,r=[],i;for(;++n<e.length;){let a=e[n],o;if(typeof a==`string`)o=a;else switch(a){case-5:o=`\r`;break;case-4:o=`
 `;break;case-3:o=`\r
-`;break;case-2:o=t?` `:`	`;break;case-1:if(!t&&i)continue;o=` `;break;default:o=String.fromCharCode(a)}i=a===-2,r.push(o)}return r.join(``)}function lXe(e){let t={constructs:eJe([XYe,...(e||{}).extensions||[]]),content:n(lJe),defined:[],document:n(dJe),flow:n(HYe),lazy:{},string:n(GYe),text:n(KYe)};return t;function n(e){return n;function n(n){return oXe(t,e,n)}}}function uXe(e){for(;!VJe(e););return e}var dXe=/[\0\t\n\r]/g;function fXe(){let e=1,t=``,n=!0,r;return i;function i(i,a,o){let s=[],c,l,u,d,f;for(i=t+(typeof i==`string`?i.toString():new TextDecoder(a||void 0).decode(i)),u=0,t=``,n&&=(i.charCodeAt(0)===65279&&u++,void 0);u<i.length;){if(dXe.lastIndex=u,c=dXe.exec(i),d=c&&c.index!==void 0?c.index:i.length,f=i.charCodeAt(d),!c){t=i.slice(u);break}if(f===10&&u===d&&r)s.push(-3),r=void 0;else switch(r&&=(s.push(-5),void 0),u<d&&(s.push(i.slice(u,d)),e+=d-u),f){case 0:s.push(65533),e++;break;case 9:for(l=Math.ceil(e/4)*4,s.push(-2);e++<l;)s.push(-1);break;case 10:s.push(-4),e=1;break;default:r=!0,e=1}u=d+1}return o&&(r&&s.push(-5),t&&s.push(t),s.push(null)),s}}var pXe=/\\([!-/:-@[-`{-~])|&(#(?:\d{1,7}|x[\da-f]{1,6})|[\da-z]{1,31});/gi;function mXe(e){return e.replace(pXe,hXe)}function hXe(e,t,n){if(t)return t;if(n.charCodeAt(0)===35){let e=n.charCodeAt(1),t=e===120||e===88;return rJe(n.slice(t?2:1),t?16:10)}return d7(n)||e}var gXe={}.hasOwnProperty;function _Xe(e,t,n){return t&&typeof t==`object`&&(n=t,t=void 0),vXe(n)(uXe(lXe(n).document().write(fXe()(e,t,!0))))}function vXe(e){let t={transforms:[],canContainEols:[`emphasis`,`fragment`,`heading`,`paragraph`,`strong`],enter:{autolink:a(fe),autolinkProtocol:T,autolinkEmail:T,atxHeading:a(ce),blockQuote:a(ie),characterEscape:T,characterReference:T,codeFenced:a(ae),codeFencedFenceInfo:o,codeFencedFenceMeta:o,codeIndented:a(ae,o),codeText:a(oe,o),codeTextData:T,data:T,codeFlowValue:T,definition:a(se),definitionDestinationString:o,definitionLabelString:o,definitionTitleString:o,emphasis:a(H),hardBreakEscape:a(le),hardBreakTrailing:a(le),htmlFlow:a(ue,o),htmlFlowData:T,htmlText:a(ue,o),htmlTextData:T,image:a(de),label:o,link:a(fe),listItem:a(me),listItemValue:f,listOrdered:a(pe,d),listUnordered:a(pe),paragraph:a(he),reference:z,referenceString:o,resourceDestinationString:o,resourceTitleString:o,setextHeading:a(ce),strong:a(ge),thematicBreak:a(ve)},exit:{atxHeading:c(),atxHeadingSequence:x,autolink:c(),autolinkEmail:re,autolinkProtocol:ne,blockQuote:c(),characterEscapeValue:E,characterReferenceMarkerHexadecimal:V,characterReferenceMarkerNumeric:V,characterReferenceValue:ee,characterReference:te,codeFenced:c(g),codeFencedFence:h,codeFencedFenceInfo:p,codeFencedFenceMeta:m,codeFlowValue:E,codeIndented:c(_),codeText:c(j),codeTextData:E,data:E,definition:c(),definitionDestinationString:b,definitionLabelString:v,definitionTitleString:y,emphasis:c(),hardBreakEscape:c(O),hardBreakTrailing:c(O),htmlFlow:c(k),htmlFlowData:E,htmlText:c(A),htmlTextData:E,image:c(N),label:F,labelText:P,lineEnding:D,link:c(M),listItem:c(),listOrdered:c(),listUnordered:c(),paragraph:c(),referenceString:B,resourceDestinationString:I,resourceTitleString:L,resource:R,setextHeading:c(w),setextHeadingLineSequence:C,setextHeadingText:S,strong:c(),thematicBreak:c()}};yXe(t,(e||{}).mdastExtensions||[]);let n={};return r;function r(e){let r={type:`root`,children:[]},a={stack:[r],tokenStack:[],config:t,enter:s,exit:l,buffer:o,resume:u,data:n},c=[],d=-1;for(;++d<e.length;)(e[d][1].type===`listOrdered`||e[d][1].type===`listUnordered`)&&(e[d][0]===`enter`?c.push(d):d=i(e,c.pop(),d));for(d=-1;++d<e.length;){let n=t[e[d][0]];gXe.call(n,e[d][1].type)&&n[e[d][1].type].call(Object.assign({sliceSerialize:e[d][2].sliceSerialize},a),e[d][1])}if(a.tokenStack.length>0){let e=a.tokenStack[a.tokenStack.length-1];(e[1]||xXe).call(a,void 0,e[0])}for(r.position={start:I7(e.length>0?e[0][1].start:{line:1,column:1,offset:0}),end:I7(e.length>0?e[e.length-2][1].end:{line:1,column:1,offset:0})},d=-1;++d<t.transforms.length;)r=t.transforms[d](r)||r;return r}function i(e,t,n){let r=t-1,i=-1,a=!1,o,s,c,l;for(;++r<=n;){let t=e[r];switch(t[1].type){case`listUnordered`:case`listOrdered`:case`blockQuote`:t[0]===`enter`?i++:i--,l=void 0;break;case`lineEndingBlank`:t[0]===`enter`&&(o&&!l&&!i&&!c&&(c=r),l=void 0);break;case`linePrefix`:case`listItemValue`:case`listItemMarker`:case`listItemPrefix`:case`listItemPrefixWhitespace`:break;default:l=void 0}if(!i&&t[0]===`enter`&&t[1].type===`listItemPrefix`||i===-1&&t[0]===`exit`&&(t[1].type===`listUnordered`||t[1].type===`listOrdered`)){if(o){let i=r;for(s=void 0;i--;){let t=e[i];if(t[1].type===`lineEnding`||t[1].type===`lineEndingBlank`){if(t[0]===`exit`)continue;s&&(e[s][1].type=`lineEndingBlank`,a=!0),t[1].type=`lineEnding`,s=i}else if(!(t[1].type===`linePrefix`||t[1].type===`blockQuotePrefix`||t[1].type===`blockQuotePrefixWhitespace`||t[1].type===`blockQuoteMarker`||t[1].type===`listItemIndent`))break}c&&(!s||c<s)&&(o._spread=!0),o.end=Object.assign({},s?e[s][1].start:t[1].end),e.splice(s||r,0,[`exit`,o,t[2]]),r++,n++}if(t[1].type===`listItemPrefix`){let i={type:`listItem`,_spread:!1,start:Object.assign({},t[1].start),end:void 0};o=i,e.splice(r,0,[`enter`,i,t[2]]),r++,n++,c=void 0,l=!0}}}return e[t][1]._spread=a,n}function a(e,t){return n;function n(n){s.call(this,e(n),n),t&&t.call(this,n)}}function o(){this.stack.push({type:`fragment`,children:[]})}function s(e,t,n){this.stack[this.stack.length-1].children.push(e),this.stack.push(e),this.tokenStack.push([t,n||void 0]),e.position={start:I7(t.start),end:void 0}}function c(e){return t;function t(t){e&&e.call(this,t),l.call(this,t)}}function l(e,t){let n=this.stack.pop(),r=this.tokenStack.pop();if(r)r[0].type!==e.type&&(t?t.call(this,e,r[0]):(r[1]||xXe).call(this,e,r[0]));else throw Error("Cannot close `"+e.type+"` ("+r7({start:e.start,end:e.end})+`): it’s not open`);n.position.end=I7(e.end)}function u(){return Jqe(this.stack.pop())}function d(){this.data.expectingFirstListItemValue=!0}function f(e){if(this.data.expectingFirstListItemValue){let t=this.stack[this.stack.length-2];t.start=Number.parseInt(this.sliceSerialize(e),10),this.data.expectingFirstListItemValue=void 0}}function p(){let e=this.resume(),t=this.stack[this.stack.length-1];t.lang=e}function m(){let e=this.resume(),t=this.stack[this.stack.length-1];t.meta=e}function h(){this.data.flowCodeInside||(this.buffer(),this.data.flowCodeInside=!0)}function g(){let e=this.resume(),t=this.stack[this.stack.length-1];t.value=e.replace(/^(\r?\n|\r)|(\r?\n|\r)$/g,``),this.data.flowCodeInside=void 0}function _(){let e=this.resume(),t=this.stack[this.stack.length-1];t.value=e.replace(/(\r?\n|\r)$/g,``)}function v(e){let t=this.resume(),n=this.stack[this.stack.length-1];n.label=t,n.identifier=m7(this.sliceSerialize(e)).toLowerCase()}function y(){let e=this.resume(),t=this.stack[this.stack.length-1];t.title=e}function b(){let e=this.resume(),t=this.stack[this.stack.length-1];t.url=e}function x(e){let t=this.stack[this.stack.length-1];t.depth||=this.sliceSerialize(e).length}function S(){this.data.setextHeadingSlurpLineEnding=!0}function C(e){let t=this.stack[this.stack.length-1];t.depth=this.sliceSerialize(e).codePointAt(0)===61?1:2}function w(){this.data.setextHeadingSlurpLineEnding=void 0}function T(e){let t=this.stack[this.stack.length-1].children,n=t[t.length-1];(!n||n.type!==`text`)&&(n=_e(),n.position={start:I7(e.start),end:void 0},t.push(n)),this.stack.push(n)}function E(e){let t=this.stack.pop();t.value+=this.sliceSerialize(e),t.position.end=I7(e.end)}function D(e){let n=this.stack[this.stack.length-1];if(this.data.atHardBreak){let t=n.children[n.children.length-1];t.position.end=I7(e.end),this.data.atHardBreak=void 0;return}!this.data.setextHeadingSlurpLineEnding&&t.canContainEols.includes(n.type)&&(T.call(this,e),E.call(this,e))}function O(){this.data.atHardBreak=!0}function k(){let e=this.resume(),t=this.stack[this.stack.length-1];t.value=e}function A(){let e=this.resume(),t=this.stack[this.stack.length-1];t.value=e}function j(){let e=this.resume(),t=this.stack[this.stack.length-1];t.value=e}function M(){let e=this.stack[this.stack.length-1];if(this.data.inReference){let t=this.data.referenceType||`shortcut`;e.type+=`Reference`,e.referenceType=t,delete e.url,delete e.title}else delete e.identifier,delete e.label;this.data.referenceType=void 0}function N(){let e=this.stack[this.stack.length-1];if(this.data.inReference){let t=this.data.referenceType||`shortcut`;e.type+=`Reference`,e.referenceType=t,delete e.url,delete e.title}else delete e.identifier,delete e.label;this.data.referenceType=void 0}function P(e){let t=this.sliceSerialize(e),n=this.stack[this.stack.length-2];n.label=mXe(t),n.identifier=m7(t).toLowerCase()}function F(){let e=this.stack[this.stack.length-1],t=this.resume(),n=this.stack[this.stack.length-1];this.data.inReference=!0,n.type===`link`?n.children=e.children:n.alt=t}function I(){let e=this.resume(),t=this.stack[this.stack.length-1];t.url=e}function L(){let e=this.resume(),t=this.stack[this.stack.length-1];t.title=e}function R(){this.data.inReference=void 0}function z(){this.data.referenceType=`collapsed`}function B(e){let t=this.resume(),n=this.stack[this.stack.length-1];n.label=t,n.identifier=m7(this.sliceSerialize(e)).toLowerCase(),this.data.referenceType=`full`}function V(e){this.data.characterReferenceType=e.type}function ee(e){let t=this.sliceSerialize(e),n=this.data.characterReferenceType,r;n?(r=rJe(t,n===`characterReferenceMarkerNumeric`?10:16),this.data.characterReferenceType=void 0):r=d7(t);let i=this.stack[this.stack.length-1];i.value+=r}function te(e){let t=this.stack.pop();t.position.end=I7(e.end)}function ne(e){E.call(this,e);let t=this.stack[this.stack.length-1];t.url=this.sliceSerialize(e)}function re(e){E.call(this,e);let t=this.stack[this.stack.length-1];t.url=`mailto:`+this.sliceSerialize(e)}function ie(){return{type:`blockquote`,children:[]}}function ae(){return{type:`code`,lang:null,meta:null,value:``}}function oe(){return{type:`inlineCode`,value:``}}function se(){return{type:`definition`,identifier:``,label:null,title:null,url:``}}function H(){return{type:`emphasis`,children:[]}}function ce(){return{type:`heading`,depth:0,children:[]}}function le(){return{type:`break`}}function ue(){return{type:`html`,value:``}}function de(){return{type:`image`,title:null,url:``,alt:null}}function fe(){return{type:`link`,title:null,url:``,children:[]}}function pe(e){return{type:`list`,ordered:e.type===`listOrdered`,start:null,spread:e._spread,children:[]}}function me(e){return{type:`listItem`,spread:e._spread,checked:null,children:[]}}function he(){return{type:`paragraph`,children:[]}}function ge(){return{type:`strong`,children:[]}}function _e(){return{type:`text`,value:``}}function ve(){return{type:`thematicBreak`}}}function I7(e){return{line:e.line,column:e.column,offset:e.offset}}function yXe(e,t){let n=-1;for(;++n<t.length;){let r=t[n];Array.isArray(r)?yXe(e,r):bXe(e,r)}}function bXe(e,t){let n;for(n in t)if(gXe.call(t,n))switch(n){case`canContainEols`:{let r=t[n];r&&e[n].push(...r);break}case`transforms`:{let r=t[n];r&&e[n].push(...r);break}case`enter`:case`exit`:{let r=t[n];r&&Object.assign(e[n],r);break}}}function xXe(e,t){throw Error(e?"Cannot close `"+e.type+"` ("+r7({start:e.start,end:e.end})+"): a different token (`"+t.type+"`, "+r7({start:t.start,end:t.end})+`) is open`:"Cannot close document, a token (`"+t.type+"`, "+r7({start:t.start,end:t.end})+`) is still open`)}function SXe(e){let t=this;t.parser=n;function n(n){return _Xe(n,{...t.data(`settings`),...e,extensions:t.data(`micromarkExtensions`)||[],mdastExtensions:t.data(`fromMarkdownExtensions`)||[]})}}function CXe(e,t){let n={type:`element`,tagName:`blockquote`,properties:{},children:e.wrap(e.all(t),!0)};return e.patch(t,n),e.applyData(t,n)}function wXe(e,t){let n={type:`element`,tagName:`br`,properties:{},children:[]};return e.patch(t,n),[e.applyData(t,n),{type:`text`,value:`
-`}]}function TXe(e,t){let n=t.value?t.value+`
-`:``,r={},i=t.lang?t.lang.split(/\s+/):[];i.length>0&&(r.className=[`language-`+i[0]]);let a={type:`element`,tagName:`code`,properties:r,children:[{type:`text`,value:n}]};return t.meta&&(a.data={meta:t.meta}),e.patch(t,a),a=e.applyData(t,a),a={type:`element`,tagName:`pre`,properties:{},children:[a]},e.patch(t,a),a}function EXe(e,t){let n={type:`element`,tagName:`del`,properties:{},children:e.all(t)};return e.patch(t,n),e.applyData(t,n)}function DXe(e,t){let n={type:`element`,tagName:`em`,properties:{},children:e.all(t)};return e.patch(t,n),e.applyData(t,n)}function OXe(e,t){let n=typeof e.options.clobberPrefix==`string`?e.options.clobberPrefix:`user-content-`,r=String(t.identifier).toUpperCase(),i=C7(r.toLowerCase()),a=e.footnoteOrder.indexOf(r),o,s=e.footnoteCounts.get(r);s===void 0?(s=0,e.footnoteOrder.push(r),o=e.footnoteOrder.length):o=a+1,s+=1,e.footnoteCounts.set(r,s);let c={type:`element`,tagName:`a`,properties:{href:`#`+n+`fn-`+i,id:n+`fnref-`+i+(s>1?`-`+s:``),dataFootnoteRef:!0,ariaDescribedBy:[`footnote-label`]},children:[{type:`text`,value:String(o)}]};e.patch(t,c);let l={type:`element`,tagName:`sup`,properties:{},children:[c]};return e.patch(t,l),e.applyData(t,l)}function kXe(e,t){let n={type:`element`,tagName:`h`+t.depth,properties:{},children:e.all(t)};return e.patch(t,n),e.applyData(t,n)}function AXe(e,t){if(e.options.allowDangerousHtml){let n={type:`raw`,value:t.value};return e.patch(t,n),e.applyData(t,n)}}function jXe(e,t){let n=t.referenceType,r=`]`;if(n===`collapsed`?r+=`[]`:n===`full`&&(r+=`[`+(t.label||t.identifier)+`]`),t.type===`imageReference`)return[{type:`text`,value:`![`+t.alt+r}];let i=e.all(t),a=i[0];a&&a.type===`text`?a.value=`[`+a.value:i.unshift({type:`text`,value:`[`});let o=i[i.length-1];return o&&o.type===`text`?o.value+=r:i.push({type:`text`,value:r}),i}function MXe(e,t){let n=String(t.identifier).toUpperCase(),r=e.definitionById.get(n);if(!r)return jXe(e,t);let i={src:C7(r.url||``),alt:t.alt};r.title!==null&&r.title!==void 0&&(i.title=r.title);let a={type:`element`,tagName:`img`,properties:i,children:[]};return e.patch(t,a),e.applyData(t,a)}function NXe(e,t){let n={src:C7(t.url)};t.alt!==null&&t.alt!==void 0&&(n.alt=t.alt),t.title!==null&&t.title!==void 0&&(n.title=t.title);let r={type:`element`,tagName:`img`,properties:n,children:[]};return e.patch(t,r),e.applyData(t,r)}function PXe(e,t){let n={type:`text`,value:t.value.replace(/\r?\n|\r/g,` `)};e.patch(t,n);let r={type:`element`,tagName:`code`,properties:{},children:[n]};return e.patch(t,r),e.applyData(t,r)}function FXe(e,t){let n=String(t.identifier).toUpperCase(),r=e.definitionById.get(n);if(!r)return jXe(e,t);let i={href:C7(r.url||``)};r.title!==null&&r.title!==void 0&&(i.title=r.title);let a={type:`element`,tagName:`a`,properties:i,children:e.all(t)};return e.patch(t,a),e.applyData(t,a)}function IXe(e,t){let n={href:C7(t.url)};t.title!==null&&t.title!==void 0&&(n.title=t.title);let r={type:`element`,tagName:`a`,properties:n,children:e.all(t)};return e.patch(t,r),e.applyData(t,r)}function LXe(e,t,n){let r=e.all(t),i=n?RXe(n):zXe(t),a={},o=[];if(typeof t.checked==`boolean`){let e=r[0],n;e&&e.type===`element`&&e.tagName===`p`?n=e:(n={type:`element`,tagName:`p`,properties:{},children:[]},r.unshift(n)),n.children.length>0&&n.children.unshift({type:`text`,value:` `}),n.children.unshift({type:`element`,tagName:`input`,properties:{type:`checkbox`,checked:t.checked,disabled:!0},children:[]}),a.className=[`task-list-item`]}let s=-1;for(;++s<r.length;){let e=r[s];(i||s!==0||e.type!==`element`||e.tagName!==`p`)&&o.push({type:`text`,value:`
+`;break;case-2:o=t?` `:`	`;break;case-1:if(!t&&i)continue;o=` `;break;default:o=String.fromCharCode(a)}i=a===-2,r.push(o)}return r.join(``)}function fXe(e){let t={constructs:rJe([$Ye,...(e||{}).extensions||[]]),content:n(fJe),defined:[],document:n(mJe),flow:n(GYe),lazy:{},string:n(JYe),text:n(YYe)};return t;function n(e){return n;function n(n){return lXe(t,e,n)}}}function pXe(e){for(;!WJe(e););return e}var mXe=/[\0\t\n\r]/g;function hXe(){let e=1,t=``,n=!0,r;return i;function i(i,a,o){let s=[],c,l,u,d,f;for(i=t+(typeof i==`string`?i.toString():new TextDecoder(a||void 0).decode(i)),u=0,t=``,n&&=(i.charCodeAt(0)===65279&&u++,void 0);u<i.length;){if(mXe.lastIndex=u,c=mXe.exec(i),d=c&&c.index!==void 0?c.index:i.length,f=i.charCodeAt(d),!c){t=i.slice(u);break}if(f===10&&u===d&&r)s.push(-3),r=void 0;else switch(r&&=(s.push(-5),void 0),u<d&&(s.push(i.slice(u,d)),e+=d-u),f){case 0:s.push(65533),e++;break;case 9:for(l=Math.ceil(e/4)*4,s.push(-2);e++<l;)s.push(-1);break;case 10:s.push(-4),e=1;break;default:r=!0,e=1}u=d+1}return o&&(r&&s.push(-5),t&&s.push(t),s.push(null)),s}}var gXe=/\\([!-/:-@[-`{-~])|&(#(?:\d{1,7}|x[\da-f]{1,6})|[\da-z]{1,31});/gi;function _Xe(e){return e.replace(gXe,vXe)}function vXe(e,t,n){if(t)return t;if(n.charCodeAt(0)===35){let e=n.charCodeAt(1),t=e===120||e===88;return oJe(n.slice(t?2:1),t?16:10)}return d7(n)||e}var yXe={}.hasOwnProperty;function bXe(e,t,n){return t&&typeof t==`object`&&(n=t,t=void 0),xXe(n)(pXe(fXe(n).document().write(hXe()(e,t,!0))))}function xXe(e){let t={transforms:[],canContainEols:[`emphasis`,`fragment`,`heading`,`paragraph`,`strong`],enter:{autolink:a(fe),autolinkProtocol:T,autolinkEmail:T,atxHeading:a(ce),blockQuote:a(ie),characterEscape:T,characterReference:T,codeFenced:a(ae),codeFencedFenceInfo:o,codeFencedFenceMeta:o,codeIndented:a(ae,o),codeText:a(oe,o),codeTextData:T,data:T,codeFlowValue:T,definition:a(se),definitionDestinationString:o,definitionLabelString:o,definitionTitleString:o,emphasis:a(H),hardBreakEscape:a(le),hardBreakTrailing:a(le),htmlFlow:a(ue,o),htmlFlowData:T,htmlText:a(ue,o),htmlTextData:T,image:a(de),label:o,link:a(fe),listItem:a(me),listItemValue:f,listOrdered:a(pe,d),listUnordered:a(pe),paragraph:a(he),reference:z,referenceString:o,resourceDestinationString:o,resourceTitleString:o,setextHeading:a(ce),strong:a(ge),thematicBreak:a(ve)},exit:{atxHeading:c(),atxHeadingSequence:x,autolink:c(),autolinkEmail:re,autolinkProtocol:ne,blockQuote:c(),characterEscapeValue:E,characterReferenceMarkerHexadecimal:V,characterReferenceMarkerNumeric:V,characterReferenceValue:ee,characterReference:te,codeFenced:c(g),codeFencedFence:h,codeFencedFenceInfo:p,codeFencedFenceMeta:m,codeFlowValue:E,codeIndented:c(_),codeText:c(j),codeTextData:E,data:E,definition:c(),definitionDestinationString:b,definitionLabelString:v,definitionTitleString:y,emphasis:c(),hardBreakEscape:c(O),hardBreakTrailing:c(O),htmlFlow:c(k),htmlFlowData:E,htmlText:c(A),htmlTextData:E,image:c(N),label:F,labelText:P,lineEnding:D,link:c(M),listItem:c(),listOrdered:c(),listUnordered:c(),paragraph:c(),referenceString:B,resourceDestinationString:I,resourceTitleString:L,resource:R,setextHeading:c(w),setextHeadingLineSequence:C,setextHeadingText:S,strong:c(),thematicBreak:c()}};SXe(t,(e||{}).mdastExtensions||[]);let n={};return r;function r(e){let r={type:`root`,children:[]},a={stack:[r],tokenStack:[],config:t,enter:s,exit:l,buffer:o,resume:u,data:n},c=[],d=-1;for(;++d<e.length;)(e[d][1].type===`listOrdered`||e[d][1].type===`listUnordered`)&&(e[d][0]===`enter`?c.push(d):d=i(e,c.pop(),d));for(d=-1;++d<e.length;){let n=t[e[d][0]];yXe.call(n,e[d][1].type)&&n[e[d][1].type].call(Object.assign({sliceSerialize:e[d][2].sliceSerialize},a),e[d][1])}if(a.tokenStack.length>0){let e=a.tokenStack[a.tokenStack.length-1];(e[1]||wXe).call(a,void 0,e[0])}for(r.position={start:I7(e.length>0?e[0][1].start:{line:1,column:1,offset:0}),end:I7(e.length>0?e[e.length-2][1].end:{line:1,column:1,offset:0})},d=-1;++d<t.transforms.length;)r=t.transforms[d](r)||r;return r}function i(e,t,n){let r=t-1,i=-1,a=!1,o,s,c,l;for(;++r<=n;){let t=e[r];switch(t[1].type){case`listUnordered`:case`listOrdered`:case`blockQuote`:t[0]===`enter`?i++:i--,l=void 0;break;case`lineEndingBlank`:t[0]===`enter`&&(o&&!l&&!i&&!c&&(c=r),l=void 0);break;case`linePrefix`:case`listItemValue`:case`listItemMarker`:case`listItemPrefix`:case`listItemPrefixWhitespace`:break;default:l=void 0}if(!i&&t[0]===`enter`&&t[1].type===`listItemPrefix`||i===-1&&t[0]===`exit`&&(t[1].type===`listUnordered`||t[1].type===`listOrdered`)){if(o){let i=r;for(s=void 0;i--;){let t=e[i];if(t[1].type===`lineEnding`||t[1].type===`lineEndingBlank`){if(t[0]===`exit`)continue;s&&(e[s][1].type=`lineEndingBlank`,a=!0),t[1].type=`lineEnding`,s=i}else if(!(t[1].type===`linePrefix`||t[1].type===`blockQuotePrefix`||t[1].type===`blockQuotePrefixWhitespace`||t[1].type===`blockQuoteMarker`||t[1].type===`listItemIndent`))break}c&&(!s||c<s)&&(o._spread=!0),o.end=Object.assign({},s?e[s][1].start:t[1].end),e.splice(s||r,0,[`exit`,o,t[2]]),r++,n++}if(t[1].type===`listItemPrefix`){let i={type:`listItem`,_spread:!1,start:Object.assign({},t[1].start),end:void 0};o=i,e.splice(r,0,[`enter`,i,t[2]]),r++,n++,c=void 0,l=!0}}}return e[t][1]._spread=a,n}function a(e,t){return n;function n(n){s.call(this,e(n),n),t&&t.call(this,n)}}function o(){this.stack.push({type:`fragment`,children:[]})}function s(e,t,n){this.stack[this.stack.length-1].children.push(e),this.stack.push(e),this.tokenStack.push([t,n||void 0]),e.position={start:I7(t.start),end:void 0}}function c(e){return t;function t(t){e&&e.call(this,t),l.call(this,t)}}function l(e,t){let n=this.stack.pop(),r=this.tokenStack.pop();if(r)r[0].type!==e.type&&(t?t.call(this,e,r[0]):(r[1]||wXe).call(this,e,r[0]));else throw Error("Cannot close `"+e.type+"` ("+r7({start:e.start,end:e.end})+`): it’s not open`);n.position.end=I7(e.end)}function u(){return Zqe(this.stack.pop())}function d(){this.data.expectingFirstListItemValue=!0}function f(e){if(this.data.expectingFirstListItemValue){let t=this.stack[this.stack.length-2];t.start=Number.parseInt(this.sliceSerialize(e),10),this.data.expectingFirstListItemValue=void 0}}function p(){let e=this.resume(),t=this.stack[this.stack.length-1];t.lang=e}function m(){let e=this.resume(),t=this.stack[this.stack.length-1];t.meta=e}function h(){this.data.flowCodeInside||(this.buffer(),this.data.flowCodeInside=!0)}function g(){let e=this.resume(),t=this.stack[this.stack.length-1];t.value=e.replace(/^(\r?\n|\r)|(\r?\n|\r)$/g,``),this.data.flowCodeInside=void 0}function _(){let e=this.resume(),t=this.stack[this.stack.length-1];t.value=e.replace(/(\r?\n|\r)$/g,``)}function v(e){let t=this.resume(),n=this.stack[this.stack.length-1];n.label=t,n.identifier=m7(this.sliceSerialize(e)).toLowerCase()}function y(){let e=this.resume(),t=this.stack[this.stack.length-1];t.title=e}function b(){let e=this.resume(),t=this.stack[this.stack.length-1];t.url=e}function x(e){let t=this.stack[this.stack.length-1];t.depth||=this.sliceSerialize(e).length}function S(){this.data.setextHeadingSlurpLineEnding=!0}function C(e){let t=this.stack[this.stack.length-1];t.depth=this.sliceSerialize(e).codePointAt(0)===61?1:2}function w(){this.data.setextHeadingSlurpLineEnding=void 0}function T(e){let t=this.stack[this.stack.length-1].children,n=t[t.length-1];(!n||n.type!==`text`)&&(n=_e(),n.position={start:I7(e.start),end:void 0},t.push(n)),this.stack.push(n)}function E(e){let t=this.stack.pop();t.value+=this.sliceSerialize(e),t.position.end=I7(e.end)}function D(e){let n=this.stack[this.stack.length-1];if(this.data.atHardBreak){let t=n.children[n.children.length-1];t.position.end=I7(e.end),this.data.atHardBreak=void 0;return}!this.data.setextHeadingSlurpLineEnding&&t.canContainEols.includes(n.type)&&(T.call(this,e),E.call(this,e))}function O(){this.data.atHardBreak=!0}function k(){let e=this.resume(),t=this.stack[this.stack.length-1];t.value=e}function A(){let e=this.resume(),t=this.stack[this.stack.length-1];t.value=e}function j(){let e=this.resume(),t=this.stack[this.stack.length-1];t.value=e}function M(){let e=this.stack[this.stack.length-1];if(this.data.inReference){let t=this.data.referenceType||`shortcut`;e.type+=`Reference`,e.referenceType=t,delete e.url,delete e.title}else delete e.identifier,delete e.label;this.data.referenceType=void 0}function N(){let e=this.stack[this.stack.length-1];if(this.data.inReference){let t=this.data.referenceType||`shortcut`;e.type+=`Reference`,e.referenceType=t,delete e.url,delete e.title}else delete e.identifier,delete e.label;this.data.referenceType=void 0}function P(e){let t=this.sliceSerialize(e),n=this.stack[this.stack.length-2];n.label=_Xe(t),n.identifier=m7(t).toLowerCase()}function F(){let e=this.stack[this.stack.length-1],t=this.resume(),n=this.stack[this.stack.length-1];this.data.inReference=!0,n.type===`link`?n.children=e.children:n.alt=t}function I(){let e=this.resume(),t=this.stack[this.stack.length-1];t.url=e}function L(){let e=this.resume(),t=this.stack[this.stack.length-1];t.title=e}function R(){this.data.inReference=void 0}function z(){this.data.referenceType=`collapsed`}function B(e){let t=this.resume(),n=this.stack[this.stack.length-1];n.label=t,n.identifier=m7(this.sliceSerialize(e)).toLowerCase(),this.data.referenceType=`full`}function V(e){this.data.characterReferenceType=e.type}function ee(e){let t=this.sliceSerialize(e),n=this.data.characterReferenceType,r;n?(r=oJe(t,n===`characterReferenceMarkerNumeric`?10:16),this.data.characterReferenceType=void 0):r=d7(t);let i=this.stack[this.stack.length-1];i.value+=r}function te(e){let t=this.stack.pop();t.position.end=I7(e.end)}function ne(e){E.call(this,e);let t=this.stack[this.stack.length-1];t.url=this.sliceSerialize(e)}function re(e){E.call(this,e);let t=this.stack[this.stack.length-1];t.url=`mailto:`+this.sliceSerialize(e)}function ie(){return{type:`blockquote`,children:[]}}function ae(){return{type:`code`,lang:null,meta:null,value:``}}function oe(){return{type:`inlineCode`,value:``}}function se(){return{type:`definition`,identifier:``,label:null,title:null,url:``}}function H(){return{type:`emphasis`,children:[]}}function ce(){return{type:`heading`,depth:0,children:[]}}function le(){return{type:`break`}}function ue(){return{type:`html`,value:``}}function de(){return{type:`image`,title:null,url:``,alt:null}}function fe(){return{type:`link`,title:null,url:``,children:[]}}function pe(e){return{type:`list`,ordered:e.type===`listOrdered`,start:null,spread:e._spread,children:[]}}function me(e){return{type:`listItem`,spread:e._spread,checked:null,children:[]}}function he(){return{type:`paragraph`,children:[]}}function ge(){return{type:`strong`,children:[]}}function _e(){return{type:`text`,value:``}}function ve(){return{type:`thematicBreak`}}}function I7(e){return{line:e.line,column:e.column,offset:e.offset}}function SXe(e,t){let n=-1;for(;++n<t.length;){let r=t[n];Array.isArray(r)?SXe(e,r):CXe(e,r)}}function CXe(e,t){let n;for(n in t)if(yXe.call(t,n))switch(n){case`canContainEols`:{let r=t[n];r&&e[n].push(...r);break}case`transforms`:{let r=t[n];r&&e[n].push(...r);break}case`enter`:case`exit`:{let r=t[n];r&&Object.assign(e[n],r);break}}}function wXe(e,t){throw Error(e?"Cannot close `"+e.type+"` ("+r7({start:e.start,end:e.end})+"): a different token (`"+t.type+"`, "+r7({start:t.start,end:t.end})+`) is open`:"Cannot close document, a token (`"+t.type+"`, "+r7({start:t.start,end:t.end})+`) is still open`)}function TXe(e){let t=this;t.parser=n;function n(n){return bXe(n,{...t.data(`settings`),...e,extensions:t.data(`micromarkExtensions`)||[],mdastExtensions:t.data(`fromMarkdownExtensions`)||[]})}}function EXe(e,t){let n={type:`element`,tagName:`blockquote`,properties:{},children:e.wrap(e.all(t),!0)};return e.patch(t,n),e.applyData(t,n)}function DXe(e,t){let n={type:`element`,tagName:`br`,properties:{},children:[]};return e.patch(t,n),[e.applyData(t,n),{type:`text`,value:`
+`}]}function OXe(e,t){let n=t.value?t.value+`
+`:``,r={},i=t.lang?t.lang.split(/\s+/):[];i.length>0&&(r.className=[`language-`+i[0]]);let a={type:`element`,tagName:`code`,properties:r,children:[{type:`text`,value:n}]};return t.meta&&(a.data={meta:t.meta}),e.patch(t,a),a=e.applyData(t,a),a={type:`element`,tagName:`pre`,properties:{},children:[a]},e.patch(t,a),a}function kXe(e,t){let n={type:`element`,tagName:`del`,properties:{},children:e.all(t)};return e.patch(t,n),e.applyData(t,n)}function AXe(e,t){let n={type:`element`,tagName:`em`,properties:{},children:e.all(t)};return e.patch(t,n),e.applyData(t,n)}function jXe(e,t){let n=typeof e.options.clobberPrefix==`string`?e.options.clobberPrefix:`user-content-`,r=String(t.identifier).toUpperCase(),i=C7(r.toLowerCase()),a=e.footnoteOrder.indexOf(r),o,s=e.footnoteCounts.get(r);s===void 0?(s=0,e.footnoteOrder.push(r),o=e.footnoteOrder.length):o=a+1,s+=1,e.footnoteCounts.set(r,s);let c={type:`element`,tagName:`a`,properties:{href:`#`+n+`fn-`+i,id:n+`fnref-`+i+(s>1?`-`+s:``),dataFootnoteRef:!0,ariaDescribedBy:[`footnote-label`]},children:[{type:`text`,value:String(o)}]};e.patch(t,c);let l={type:`element`,tagName:`sup`,properties:{},children:[c]};return e.patch(t,l),e.applyData(t,l)}function MXe(e,t){let n={type:`element`,tagName:`h`+t.depth,properties:{},children:e.all(t)};return e.patch(t,n),e.applyData(t,n)}function NXe(e,t){if(e.options.allowDangerousHtml){let n={type:`raw`,value:t.value};return e.patch(t,n),e.applyData(t,n)}}function PXe(e,t){let n=t.referenceType,r=`]`;if(n===`collapsed`?r+=`[]`:n===`full`&&(r+=`[`+(t.label||t.identifier)+`]`),t.type===`imageReference`)return[{type:`text`,value:`![`+t.alt+r}];let i=e.all(t),a=i[0];a&&a.type===`text`?a.value=`[`+a.value:i.unshift({type:`text`,value:`[`});let o=i[i.length-1];return o&&o.type===`text`?o.value+=r:i.push({type:`text`,value:r}),i}function FXe(e,t){let n=String(t.identifier).toUpperCase(),r=e.definitionById.get(n);if(!r)return PXe(e,t);let i={src:C7(r.url||``),alt:t.alt};r.title!==null&&r.title!==void 0&&(i.title=r.title);let a={type:`element`,tagName:`img`,properties:i,children:[]};return e.patch(t,a),e.applyData(t,a)}function IXe(e,t){let n={src:C7(t.url)};t.alt!==null&&t.alt!==void 0&&(n.alt=t.alt),t.title!==null&&t.title!==void 0&&(n.title=t.title);let r={type:`element`,tagName:`img`,properties:n,children:[]};return e.patch(t,r),e.applyData(t,r)}function LXe(e,t){let n={type:`text`,value:t.value.replace(/\r?\n|\r/g,` `)};e.patch(t,n);let r={type:`element`,tagName:`code`,properties:{},children:[n]};return e.patch(t,r),e.applyData(t,r)}function RXe(e,t){let n=String(t.identifier).toUpperCase(),r=e.definitionById.get(n);if(!r)return PXe(e,t);let i={href:C7(r.url||``)};r.title!==null&&r.title!==void 0&&(i.title=r.title);let a={type:`element`,tagName:`a`,properties:i,children:e.all(t)};return e.patch(t,a),e.applyData(t,a)}function zXe(e,t){let n={href:C7(t.url)};t.title!==null&&t.title!==void 0&&(n.title=t.title);let r={type:`element`,tagName:`a`,properties:n,children:e.all(t)};return e.patch(t,r),e.applyData(t,r)}function BXe(e,t,n){let r=e.all(t),i=n?VXe(n):HXe(t),a={},o=[];if(typeof t.checked==`boolean`){let e=r[0],n;e&&e.type===`element`&&e.tagName===`p`?n=e:(n={type:`element`,tagName:`p`,properties:{},children:[]},r.unshift(n)),n.children.length>0&&n.children.unshift({type:`text`,value:` `}),n.children.unshift({type:`element`,tagName:`input`,properties:{type:`checkbox`,checked:t.checked,disabled:!0},children:[]}),a.className=[`task-list-item`]}let s=-1;for(;++s<r.length;){let e=r[s];(i||s!==0||e.type!==`element`||e.tagName!==`p`)&&o.push({type:`text`,value:`
 `}),e.type===`element`&&e.tagName===`p`&&!i?o.push(...e.children):o.push(e)}let c=r[r.length-1];c&&(i||c.type!==`element`||c.tagName!==`p`)&&o.push({type:`text`,value:`
-`});let l={type:`element`,tagName:`li`,properties:a,children:o};return e.patch(t,l),e.applyData(t,l)}function RXe(e){let t=!1;if(e.type===`list`){t=e.spread||!1;let n=e.children,r=-1;for(;!t&&++r<n.length;)t=zXe(n[r])}return t}function zXe(e){return e.spread??e.children.length>1}function BXe(e,t){let n={},r=e.all(t),i=-1;for(typeof t.start==`number`&&t.start!==1&&(n.start=t.start);++i<r.length;){let e=r[i];if(e.type===`element`&&e.tagName===`li`&&e.properties&&Array.isArray(e.properties.className)&&e.properties.className.includes(`task-list-item`)){n.className=[`contains-task-list`];break}}let a={type:`element`,tagName:t.ordered?`ol`:`ul`,properties:n,children:e.wrap(r,!0)};return e.patch(t,a),e.applyData(t,a)}function VXe(e,t){let n={type:`element`,tagName:`p`,properties:{},children:e.all(t)};return e.patch(t,n),e.applyData(t,n)}function HXe(e,t){let n={type:`root`,children:e.wrap(e.all(t))};return e.patch(t,n),e.applyData(t,n)}function UXe(e,t){let n={type:`element`,tagName:`strong`,properties:{},children:e.all(t)};return e.patch(t,n),e.applyData(t,n)}function WXe(e,t){let n=e.all(t),r=n.shift(),i=[];if(r){let n={type:`element`,tagName:`thead`,properties:{},children:e.wrap([r],!0)};e.patch(t.children[0],n),i.push(n)}if(n.length>0){let r={type:`element`,tagName:`tbody`,properties:{},children:e.wrap(n,!0)},a=n7(t.children[1]),o=vqe(t.children[t.children.length-1]);a&&o&&(r.position={start:a,end:o}),i.push(r)}let a={type:`element`,tagName:`table`,properties:{},children:e.wrap(i,!0)};return e.patch(t,a),e.applyData(t,a)}function GXe(e,t,n){let r=n?n.children:void 0,i=(r?r.indexOf(t):1)===0?`th`:`td`,a=n&&n.type===`table`?n.align:void 0,o=a?a.length:t.children.length,s=-1,c=[];for(;++s<o;){let n=t.children[s],r={},o=a?a[s]:void 0;o&&(r.align=o);let l={type:`element`,tagName:i,properties:r,children:[]};n&&(l.children=e.all(n),e.patch(n,l),l=e.applyData(n,l)),c.push(l)}let l={type:`element`,tagName:`tr`,properties:{},children:e.wrap(c,!0)};return e.patch(t,l),e.applyData(t,l)}function KXe(e,t){let n={type:`element`,tagName:`td`,properties:{},children:e.all(t)};return e.patch(t,n),e.applyData(t,n)}var qXe=9,JXe=32;function YXe(e){let t=String(e),n=/\r?\n|\r/g,r=n.exec(t),i=0,a=[];for(;r;)a.push(XXe(t.slice(i,r.index),i>0,!0),r[0]),i=r.index+r[0].length,r=n.exec(t);return a.push(XXe(t.slice(i),i>0,!1)),a.join(``)}function XXe(e,t,n){let r=0,i=e.length;if(t){let t=e.codePointAt(r);for(;t===qXe||t===JXe;)r++,t=e.codePointAt(r)}if(n){let t=e.codePointAt(i-1);for(;t===qXe||t===JXe;)i--,t=e.codePointAt(i-1)}return i>r?e.slice(r,i):``}function ZXe(e,t){let n={type:`text`,value:YXe(String(t.value))};return e.patch(t,n),e.applyData(t,n)}function QXe(e,t){let n={type:`element`,tagName:`hr`,properties:{},children:[]};return e.patch(t,n),e.applyData(t,n)}var $Xe={blockquote:CXe,break:wXe,code:TXe,delete:EXe,emphasis:DXe,footnoteReference:OXe,heading:kXe,html:AXe,imageReference:MXe,image:NXe,inlineCode:PXe,linkReference:FXe,link:IXe,listItem:LXe,list:BXe,paragraph:VXe,root:HXe,strong:UXe,table:WXe,tableCell:KXe,tableRow:GXe,text:ZXe,thematicBreak:QXe,toml:L7,yaml:L7,definition:L7,footnoteDefinition:L7};function L7(){}var eZe=typeof self==`object`?self:globalThis,tZe=(e,t)=>{switch(e){case`Function`:case`SharedWorker`:case`Worker`:case`eval`:case`setInterval`:case`setTimeout`:throw TypeError(`unable to deserialize `+e)}return new eZe[e](t)},nZe=(e,t)=>{let n=(t,n)=>(e.set(n,t),t),r=i=>{if(e.has(i))return e.get(i);let[a,o]=t[i];switch(a){case 0:case-1:return n(o,i);case 1:{let e=n([],i);for(let t of o)e.push(r(t));return e}case 2:{let e=n({},i);for(let[t,n]of o)e[r(t)]=r(n);return e}case 3:return n(new Date(o),i);case 4:{let{source:e,flags:t}=o;return n(new RegExp(e,t),i)}case 5:{let e=n(new Map,i);for(let[t,n]of o)e.set(r(t),r(n));return e}case 6:{let e=n(new Set,i);for(let t of o)e.add(r(t));return e}case 7:{let{name:e,message:t}=o;return n(tZe(e,t),i)}case 8:return n(BigInt(o),i);case`BigInt`:return n(Object(BigInt(o)),i);case`ArrayBuffer`:return n(new Uint8Array(o).buffer,o);case`DataView`:{let{buffer:e}=new Uint8Array(o);return n(new DataView(e),o)}}return n(tZe(a,o),i)};return r},rZe=e=>nZe(new Map,e)(0),R7=``,{toString:iZe}={},{keys:aZe}=Object,z7=e=>{let t=typeof e;if(t!==`object`||!e)return[0,t];let n=iZe.call(e).slice(8,-1);switch(n){case`Array`:return[1,R7];case`Object`:return[2,R7];case`Date`:return[3,R7];case`RegExp`:return[4,R7];case`Map`:return[5,R7];case`Set`:return[6,R7];case`DataView`:return[1,n]}return n.includes(`Array`)?[1,n]:n.includes(`Error`)?[7,n]:[2,n]},B7=([e,t])=>e===0&&(t===`function`||t===`symbol`),oZe=(e,t,n,r)=>{let i=(e,t)=>{let i=r.push(e)-1;return n.set(t,i),i},a=r=>{if(n.has(r))return n.get(r);let[o,s]=z7(r);switch(o){case 0:{let t=r;switch(s){case`bigint`:o=8,t=r.toString();break;case`function`:case`symbol`:if(e)throw TypeError(`unable to serialize `+s);t=null;break;case`undefined`:return i([-1],r)}return i([o,t],r)}case 1:{if(s){let e=r;return s===`DataView`?e=new Uint8Array(r.buffer):s===`ArrayBuffer`&&(e=new Uint8Array(r)),i([s,[...e]],r)}let e=[],t=i([o,e],r);for(let t of r)e.push(a(t));return t}case 2:{if(s)switch(s){case`BigInt`:return i([s,r.toString()],r);case`Boolean`:case`Number`:case`String`:return i([s,r.valueOf()],r)}if(t&&`toJSON`in r)return a(r.toJSON());let n=[],c=i([o,n],r);for(let t of aZe(r))(e||!B7(z7(r[t])))&&n.push([a(t),a(r[t])]);return c}case 3:return i([o,r.toISOString()],r);case 4:{let{source:e,flags:t}=r;return i([o,{source:e,flags:t}],r)}case 5:{let t=[],n=i([o,t],r);for(let[n,i]of r)(e||!(B7(z7(n))||B7(z7(i))))&&t.push([a(n),a(i)]);return n}case 6:{let t=[],n=i([o,t],r);for(let n of r)(e||!B7(z7(n)))&&t.push(a(n));return n}}let{message:c}=r;return i([o,{name:s,message:c}],r)};return a},sZe=(e,{json:t,lossy:n}={})=>{let r=[];return oZe(!(t||n),!!t,new Map,r)(e),r},V7=typeof structuredClone==`function`?(e,t)=>t&&(`json`in t||`lossy`in t)?rZe(sZe(e,t)):structuredClone(e):(e,t)=>rZe(sZe(e,t));function cZe(e,t){let n=[{type:`text`,value:`↩`}];return t>1&&n.push({type:`element`,tagName:`sup`,properties:{},children:[{type:`text`,value:String(t)}]}),n}function lZe(e,t){return`Back to reference `+(e+1)+(t>1?`-`+t:``)}function uZe(e){let t=typeof e.options.clobberPrefix==`string`?e.options.clobberPrefix:`user-content-`,n=e.options.footnoteBackContent||cZe,r=e.options.footnoteBackLabel||lZe,i=e.options.footnoteLabel||`Footnotes`,a=e.options.footnoteLabelTagName||`h2`,o=e.options.footnoteLabelProperties||{className:[`sr-only`]},s=[],c=-1;for(;++c<e.footnoteOrder.length;){let i=e.footnoteById.get(e.footnoteOrder[c]);if(!i)continue;let a=e.all(i),o=String(i.identifier).toUpperCase(),l=C7(o.toLowerCase()),u=0,d=[],f=e.footnoteCounts.get(o);for(;f!==void 0&&++u<=f;){d.length>0&&d.push({type:`text`,value:` `});let e=typeof n==`string`?n:n(c,u);typeof e==`string`&&(e={type:`text`,value:e}),d.push({type:`element`,tagName:`a`,properties:{href:`#`+t+`fnref-`+l+(u>1?`-`+u:``),dataFootnoteBackref:``,ariaLabel:typeof r==`string`?r:r(c,u),className:[`data-footnote-backref`]},children:Array.isArray(e)?e:[e]})}let p=a[a.length-1];if(p&&p.type===`element`&&p.tagName===`p`){let e=p.children[p.children.length-1];e&&e.type===`text`?e.value+=` `:p.children.push({type:`text`,value:` `}),p.children.push(...d)}else a.push(...d);let m={type:`element`,tagName:`li`,properties:{id:t+`fn-`+l},children:e.wrap(a,!0)};e.patch(i,m),s.push(m)}if(s.length!==0)return{type:`element`,tagName:`section`,properties:{dataFootnotes:!0,className:[`footnotes`]},children:[{type:`element`,tagName:a,properties:{...V7(o),id:`footnote-label`},children:[{type:`text`,value:i}]},{type:`text`,value:`
+`});let l={type:`element`,tagName:`li`,properties:a,children:o};return e.patch(t,l),e.applyData(t,l)}function VXe(e){let t=!1;if(e.type===`list`){t=e.spread||!1;let n=e.children,r=-1;for(;!t&&++r<n.length;)t=HXe(n[r])}return t}function HXe(e){return e.spread??e.children.length>1}function UXe(e,t){let n={},r=e.all(t),i=-1;for(typeof t.start==`number`&&t.start!==1&&(n.start=t.start);++i<r.length;){let e=r[i];if(e.type===`element`&&e.tagName===`li`&&e.properties&&Array.isArray(e.properties.className)&&e.properties.className.includes(`task-list-item`)){n.className=[`contains-task-list`];break}}let a={type:`element`,tagName:t.ordered?`ol`:`ul`,properties:n,children:e.wrap(r,!0)};return e.patch(t,a),e.applyData(t,a)}function WXe(e,t){let n={type:`element`,tagName:`p`,properties:{},children:e.all(t)};return e.patch(t,n),e.applyData(t,n)}function GXe(e,t){let n={type:`root`,children:e.wrap(e.all(t))};return e.patch(t,n),e.applyData(t,n)}function KXe(e,t){let n={type:`element`,tagName:`strong`,properties:{},children:e.all(t)};return e.patch(t,n),e.applyData(t,n)}function qXe(e,t){let n=e.all(t),r=n.shift(),i=[];if(r){let n={type:`element`,tagName:`thead`,properties:{},children:e.wrap([r],!0)};e.patch(t.children[0],n),i.push(n)}if(n.length>0){let r={type:`element`,tagName:`tbody`,properties:{},children:e.wrap(n,!0)},a=n7(t.children[1]),o=xqe(t.children[t.children.length-1]);a&&o&&(r.position={start:a,end:o}),i.push(r)}let a={type:`element`,tagName:`table`,properties:{},children:e.wrap(i,!0)};return e.patch(t,a),e.applyData(t,a)}function JXe(e,t,n){let r=n?n.children:void 0,i=(r?r.indexOf(t):1)===0?`th`:`td`,a=n&&n.type===`table`?n.align:void 0,o=a?a.length:t.children.length,s=-1,c=[];for(;++s<o;){let n=t.children[s],r={},o=a?a[s]:void 0;o&&(r.align=o);let l={type:`element`,tagName:i,properties:r,children:[]};n&&(l.children=e.all(n),e.patch(n,l),l=e.applyData(n,l)),c.push(l)}let l={type:`element`,tagName:`tr`,properties:{},children:e.wrap(c,!0)};return e.patch(t,l),e.applyData(t,l)}function YXe(e,t){let n={type:`element`,tagName:`td`,properties:{},children:e.all(t)};return e.patch(t,n),e.applyData(t,n)}var XXe=9,ZXe=32;function QXe(e){let t=String(e),n=/\r?\n|\r/g,r=n.exec(t),i=0,a=[];for(;r;)a.push($Xe(t.slice(i,r.index),i>0,!0),r[0]),i=r.index+r[0].length,r=n.exec(t);return a.push($Xe(t.slice(i),i>0,!1)),a.join(``)}function $Xe(e,t,n){let r=0,i=e.length;if(t){let t=e.codePointAt(r);for(;t===XXe||t===ZXe;)r++,t=e.codePointAt(r)}if(n){let t=e.codePointAt(i-1);for(;t===XXe||t===ZXe;)i--,t=e.codePointAt(i-1)}return i>r?e.slice(r,i):``}function eZe(e,t){let n={type:`text`,value:QXe(String(t.value))};return e.patch(t,n),e.applyData(t,n)}function tZe(e,t){let n={type:`element`,tagName:`hr`,properties:{},children:[]};return e.patch(t,n),e.applyData(t,n)}var nZe={blockquote:EXe,break:DXe,code:OXe,delete:kXe,emphasis:AXe,footnoteReference:jXe,heading:MXe,html:NXe,imageReference:FXe,image:IXe,inlineCode:LXe,linkReference:RXe,link:zXe,listItem:BXe,list:UXe,paragraph:WXe,root:GXe,strong:KXe,table:qXe,tableCell:YXe,tableRow:JXe,text:eZe,thematicBreak:tZe,toml:L7,yaml:L7,definition:L7,footnoteDefinition:L7};function L7(){}var rZe=typeof self==`object`?self:globalThis,iZe=(e,t)=>{switch(e){case`Function`:case`SharedWorker`:case`Worker`:case`eval`:case`setInterval`:case`setTimeout`:throw TypeError(`unable to deserialize `+e)}return new rZe[e](t)},aZe=(e,t)=>{let n=(t,n)=>(e.set(n,t),t),r=i=>{if(e.has(i))return e.get(i);let[a,o]=t[i];switch(a){case 0:case-1:return n(o,i);case 1:{let e=n([],i);for(let t of o)e.push(r(t));return e}case 2:{let e=n({},i);for(let[t,n]of o)e[r(t)]=r(n);return e}case 3:return n(new Date(o),i);case 4:{let{source:e,flags:t}=o;return n(new RegExp(e,t),i)}case 5:{let e=n(new Map,i);for(let[t,n]of o)e.set(r(t),r(n));return e}case 6:{let e=n(new Set,i);for(let t of o)e.add(r(t));return e}case 7:{let{name:e,message:t}=o;return n(iZe(e,t),i)}case 8:return n(BigInt(o),i);case`BigInt`:return n(Object(BigInt(o)),i);case`ArrayBuffer`:return n(new Uint8Array(o).buffer,o);case`DataView`:{let{buffer:e}=new Uint8Array(o);return n(new DataView(e),o)}}return n(iZe(a,o),i)};return r},oZe=e=>aZe(new Map,e)(0),R7=``,{toString:sZe}={},{keys:cZe}=Object,z7=e=>{let t=typeof e;if(t!==`object`||!e)return[0,t];let n=sZe.call(e).slice(8,-1);switch(n){case`Array`:return[1,R7];case`Object`:return[2,R7];case`Date`:return[3,R7];case`RegExp`:return[4,R7];case`Map`:return[5,R7];case`Set`:return[6,R7];case`DataView`:return[1,n]}return n.includes(`Array`)?[1,n]:n.includes(`Error`)?[7,n]:[2,n]},B7=([e,t])=>e===0&&(t===`function`||t===`symbol`),lZe=(e,t,n,r)=>{let i=(e,t)=>{let i=r.push(e)-1;return n.set(t,i),i},a=r=>{if(n.has(r))return n.get(r);let[o,s]=z7(r);switch(o){case 0:{let t=r;switch(s){case`bigint`:o=8,t=r.toString();break;case`function`:case`symbol`:if(e)throw TypeError(`unable to serialize `+s);t=null;break;case`undefined`:return i([-1],r)}return i([o,t],r)}case 1:{if(s){let e=r;return s===`DataView`?e=new Uint8Array(r.buffer):s===`ArrayBuffer`&&(e=new Uint8Array(r)),i([s,[...e]],r)}let e=[],t=i([o,e],r);for(let t of r)e.push(a(t));return t}case 2:{if(s)switch(s){case`BigInt`:return i([s,r.toString()],r);case`Boolean`:case`Number`:case`String`:return i([s,r.valueOf()],r)}if(t&&`toJSON`in r)return a(r.toJSON());let n=[],c=i([o,n],r);for(let t of cZe(r))(e||!B7(z7(r[t])))&&n.push([a(t),a(r[t])]);return c}case 3:return i([o,r.toISOString()],r);case 4:{let{source:e,flags:t}=r;return i([o,{source:e,flags:t}],r)}case 5:{let t=[],n=i([o,t],r);for(let[n,i]of r)(e||!(B7(z7(n))||B7(z7(i))))&&t.push([a(n),a(i)]);return n}case 6:{let t=[],n=i([o,t],r);for(let n of r)(e||!B7(z7(n)))&&t.push(a(n));return n}}let{message:c}=r;return i([o,{name:s,message:c}],r)};return a},uZe=(e,{json:t,lossy:n}={})=>{let r=[];return lZe(!(t||n),!!t,new Map,r)(e),r},V7=typeof structuredClone==`function`?(e,t)=>t&&(`json`in t||`lossy`in t)?oZe(uZe(e,t)):structuredClone(e):(e,t)=>oZe(uZe(e,t));function dZe(e,t){let n=[{type:`text`,value:`↩`}];return t>1&&n.push({type:`element`,tagName:`sup`,properties:{},children:[{type:`text`,value:String(t)}]}),n}function fZe(e,t){return`Back to reference `+(e+1)+(t>1?`-`+t:``)}function pZe(e){let t=typeof e.options.clobberPrefix==`string`?e.options.clobberPrefix:`user-content-`,n=e.options.footnoteBackContent||dZe,r=e.options.footnoteBackLabel||fZe,i=e.options.footnoteLabel||`Footnotes`,a=e.options.footnoteLabelTagName||`h2`,o=e.options.footnoteLabelProperties||{className:[`sr-only`]},s=[],c=-1;for(;++c<e.footnoteOrder.length;){let i=e.footnoteById.get(e.footnoteOrder[c]);if(!i)continue;let a=e.all(i),o=String(i.identifier).toUpperCase(),l=C7(o.toLowerCase()),u=0,d=[],f=e.footnoteCounts.get(o);for(;f!==void 0&&++u<=f;){d.length>0&&d.push({type:`text`,value:` `});let e=typeof n==`string`?n:n(c,u);typeof e==`string`&&(e={type:`text`,value:e}),d.push({type:`element`,tagName:`a`,properties:{href:`#`+t+`fnref-`+l+(u>1?`-`+u:``),dataFootnoteBackref:``,ariaLabel:typeof r==`string`?r:r(c,u),className:[`data-footnote-backref`]},children:Array.isArray(e)?e:[e]})}let p=a[a.length-1];if(p&&p.type===`element`&&p.tagName===`p`){let e=p.children[p.children.length-1];e&&e.type===`text`?e.value+=` `:p.children.push({type:`text`,value:` `}),p.children.push(...d)}else a.push(...d);let m={type:`element`,tagName:`li`,properties:{id:t+`fn-`+l},children:e.wrap(a,!0)};e.patch(i,m),s.push(m)}if(s.length!==0)return{type:`element`,tagName:`section`,properties:{dataFootnotes:!0,className:[`footnotes`]},children:[{type:`element`,tagName:a,properties:{...V7(o),id:`footnote-label`},children:[{type:`text`,value:i}]},{type:`text`,value:`
 `},{type:`element`,tagName:`ol`,properties:{},children:e.wrap(s,!0)},{type:`text`,value:`
-`}]}}var dZe=(function(e){if(e==null)return hZe;if(typeof e==`function`)return H7(e);if(typeof e==`object`)return Array.isArray(e)?fZe(e):pZe(e);if(typeof e==`string`)return mZe(e);throw Error(`Expected function, string, or object as test`)});function fZe(e){let t=[],n=-1;for(;++n<e.length;)t[n]=dZe(e[n]);return H7(r);function r(...e){let n=-1;for(;++n<t.length;)if(t[n].apply(this,e))return!0;return!1}}function pZe(e){let t=e;return H7(n);function n(n){let r=n,i;for(i in e)if(r[i]!==t[i])return!1;return!0}}function mZe(e){return H7(t);function t(t){return t&&t.type===e}}function H7(e){return t;function t(t,n,r){return!!(gZe(t)&&e.call(this,t,typeof n==`number`?n:void 0,r||void 0))}}function hZe(){return!0}function gZe(e){return typeof e==`object`&&!!e&&`type`in e}function _Ze(e){return e}var vZe=[];function yZe(e,t,n,r){let i;typeof t==`function`&&typeof n!=`function`?(r=n,n=t):i=t;let a=dZe(i),o=r?-1:1;s(e,void 0,[])();function s(e,i,c){let l=e&&typeof e==`object`?e:{};if(typeof l.type==`string`){let t=typeof l.tagName==`string`?l.tagName:typeof l.name==`string`?l.name:void 0;Object.defineProperty(u,"name",{value:`node (`+_Ze(e.type+(t?`<`+t+`>`:``))+`)`})}return u;function u(){let l=vZe,u,d,f;if((!t||a(e,i,c[c.length-1]||void 0))&&(l=bZe(n(e,c)),l[0]===!1))return l;if(`children`in e&&e.children){let t=e;if(t.children&&l[0]!==`skip`)for(d=(r?t.children.length:-1)+o,f=c.concat(t);d>-1&&d<t.children.length;){let e=t.children[d];if(u=s(e,d,f)(),u[0]===!1)return u;d=typeof u[1]==`number`?u[1]:d+o}}return l}}}function bZe(e){return Array.isArray(e)?e:typeof e==`number`?[!0,e]:e==null?vZe:[e]}function xZe(e,t,n,r){let i,a,o;typeof t==`function`&&typeof n!=`function`?(a=void 0,o=t,i=n):(a=t,o=n,i=r),yZe(e,a,s,i);function s(e,t){let n=t[t.length-1],r=n?n.children.indexOf(e):void 0;return o(e,r,n)}}var U7={}.hasOwnProperty,SZe={};function CZe(e,t){let n=t||SZe,r=new Map,i=new Map,a={all:s,applyData:TZe,definitionById:r,footnoteById:i,footnoteCounts:new Map,footnoteOrder:[],handlers:{...$Xe,...n.handlers},one:o,options:n,patch:wZe,wrap:DZe};return xZe(e,function(e){if(e.type===`definition`||e.type===`footnoteDefinition`){let t=e.type===`definition`?r:i,n=String(e.identifier).toUpperCase();t.has(n)||t.set(n,e)}}),a;function o(e,t){let n=e.type,r=a.handlers[n];if(U7.call(a.handlers,n)&&r)return r(a,e,t);if(a.options.passThrough&&a.options.passThrough.includes(n)){if(`children`in e){let{children:t,...n}=e,r=V7(n);return r.children=a.all(e),r}return V7(e)}return(a.options.unknownHandler||EZe)(a,e,t)}function s(e){let t=[];if(`children`in e){let n=e.children,r=-1;for(;++r<n.length;){let i=a.one(n[r],e);if(i){if(r&&n[r-1].type===`break`&&(!Array.isArray(i)&&i.type===`text`&&(i.value=OZe(i.value)),!Array.isArray(i)&&i.type===`element`)){let e=i.children[0];e&&e.type===`text`&&(e.value=OZe(e.value))}Array.isArray(i)?t.push(...i):t.push(i)}}}return t}}function wZe(e,t){e.position&&(t.position=bqe(e))}function TZe(e,t){let n=t;if(e&&e.data){let t=e.data.hName,r=e.data.hChildren,i=e.data.hProperties;typeof t==`string`&&(n.type===`element`?n.tagName=t:n={type:`element`,tagName:t,properties:{},children:`children`in n?n.children:[n]}),n.type===`element`&&i&&Object.assign(n.properties,V7(i)),`children`in n&&n.children&&r!=null&&(n.children=r)}return n}function EZe(e,t){let n=t.data||{},r=`value`in t&&!(U7.call(n,`hProperties`)||U7.call(n,`hChildren`))?{type:`text`,value:t.value}:{type:`element`,tagName:`div`,properties:{},children:e.all(t)};return e.patch(t,r),e.applyData(t,r)}function DZe(e,t){let n=[],r=-1;for(t&&n.push({type:`text`,value:`
+`}]}}var mZe=(function(e){if(e==null)return vZe;if(typeof e==`function`)return H7(e);if(typeof e==`object`)return Array.isArray(e)?hZe(e):gZe(e);if(typeof e==`string`)return _Ze(e);throw Error(`Expected function, string, or object as test`)});function hZe(e){let t=[],n=-1;for(;++n<e.length;)t[n]=mZe(e[n]);return H7(r);function r(...e){let n=-1;for(;++n<t.length;)if(t[n].apply(this,e))return!0;return!1}}function gZe(e){let t=e;return H7(n);function n(n){let r=n,i;for(i in e)if(r[i]!==t[i])return!1;return!0}}function _Ze(e){return H7(t);function t(t){return t&&t.type===e}}function H7(e){return t;function t(t,n,r){return!!(yZe(t)&&e.call(this,t,typeof n==`number`?n:void 0,r||void 0))}}function vZe(){return!0}function yZe(e){return typeof e==`object`&&!!e&&`type`in e}function bZe(e){return e}var xZe=[];function SZe(e,t,n,r){let i;typeof t==`function`&&typeof n!=`function`?(r=n,n=t):i=t;let a=mZe(i),o=r?-1:1;s(e,void 0,[])();function s(e,i,c){let l=e&&typeof e==`object`?e:{};if(typeof l.type==`string`){let t=typeof l.tagName==`string`?l.tagName:typeof l.name==`string`?l.name:void 0;Object.defineProperty(u,"name",{value:`node (`+bZe(e.type+(t?`<`+t+`>`:``))+`)`})}return u;function u(){let l=xZe,u,d,f;if((!t||a(e,i,c[c.length-1]||void 0))&&(l=CZe(n(e,c)),l[0]===!1))return l;if(`children`in e&&e.children){let t=e;if(t.children&&l[0]!==`skip`)for(d=(r?t.children.length:-1)+o,f=c.concat(t);d>-1&&d<t.children.length;){let e=t.children[d];if(u=s(e,d,f)(),u[0]===!1)return u;d=typeof u[1]==`number`?u[1]:d+o}}return l}}}function CZe(e){return Array.isArray(e)?e:typeof e==`number`?[!0,e]:e==null?xZe:[e]}function wZe(e,t,n,r){let i,a,o;typeof t==`function`&&typeof n!=`function`?(a=void 0,o=t,i=n):(a=t,o=n,i=r),SZe(e,a,s,i);function s(e,t){let n=t[t.length-1],r=n?n.children.indexOf(e):void 0;return o(e,r,n)}}var U7={}.hasOwnProperty,TZe={};function EZe(e,t){let n=t||TZe,r=new Map,i=new Map,a={all:s,applyData:OZe,definitionById:r,footnoteById:i,footnoteCounts:new Map,footnoteOrder:[],handlers:{...nZe,...n.handlers},one:o,options:n,patch:DZe,wrap:AZe};return wZe(e,function(e){if(e.type===`definition`||e.type===`footnoteDefinition`){let t=e.type===`definition`?r:i,n=String(e.identifier).toUpperCase();t.has(n)||t.set(n,e)}}),a;function o(e,t){let n=e.type,r=a.handlers[n];if(U7.call(a.handlers,n)&&r)return r(a,e,t);if(a.options.passThrough&&a.options.passThrough.includes(n)){if(`children`in e){let{children:t,...n}=e,r=V7(n);return r.children=a.all(e),r}return V7(e)}return(a.options.unknownHandler||kZe)(a,e,t)}function s(e){let t=[];if(`children`in e){let n=e.children,r=-1;for(;++r<n.length;){let i=a.one(n[r],e);if(i){if(r&&n[r-1].type===`break`&&(!Array.isArray(i)&&i.type===`text`&&(i.value=jZe(i.value)),!Array.isArray(i)&&i.type===`element`)){let e=i.children[0];e&&e.type===`text`&&(e.value=jZe(e.value))}Array.isArray(i)?t.push(...i):t.push(i)}}}return t}}function DZe(e,t){e.position&&(t.position=Cqe(e))}function OZe(e,t){let n=t;if(e&&e.data){let t=e.data.hName,r=e.data.hChildren,i=e.data.hProperties;typeof t==`string`&&(n.type===`element`?n.tagName=t:n={type:`element`,tagName:t,properties:{},children:`children`in n?n.children:[n]}),n.type===`element`&&i&&Object.assign(n.properties,V7(i)),`children`in n&&n.children&&r!=null&&(n.children=r)}return n}function kZe(e,t){let n=t.data||{},r=`value`in t&&!(U7.call(n,`hProperties`)||U7.call(n,`hChildren`))?{type:`text`,value:t.value}:{type:`element`,tagName:`div`,properties:{},children:e.all(t)};return e.patch(t,r),e.applyData(t,r)}function AZe(e,t){let n=[],r=-1;for(t&&n.push({type:`text`,value:`
 `});++r<e.length;)r&&n.push({type:`text`,value:`
 `}),n.push(e[r]);return t&&e.length>0&&n.push({type:`text`,value:`
-`}),n}function OZe(e){let t=0,n=e.charCodeAt(t);for(;n===9||n===32;)t++,n=e.charCodeAt(t);return e.slice(t)}function kZe(e,t){let n=CZe(e,t),r=n.one(e,void 0),i=uZe(n),a=Array.isArray(r)?{type:`root`,children:r}:r||{type:`root`,children:[]};return i&&(`children`in a,a.children.push({type:`text`,value:`
-`},i)),a}function AZe(e,t){return e&&`run`in e?async function(n,r){let i=kZe(n,{file:r,...t});await e.run(i,r)}:function(n,r){return kZe(n,{file:r,...e||t})}}function jZe(e){if(e)throw e}var MZe=o(((e,t)=>{var n=Object.prototype.hasOwnProperty,r=Object.prototype.toString,i=Object.defineProperty,a=Object.getOwnPropertyDescriptor,o=function(e){return typeof Array.isArray==`function`?Array.isArray(e):r.call(e)===`[object Array]`},s=function(e){if(!e||r.call(e)!==`[object Object]`)return!1;var t=n.call(e,`constructor`),i=e.constructor&&e.constructor.prototype&&n.call(e.constructor.prototype,`isPrototypeOf`);if(e.constructor&&!t&&!i)return!1;for(var a in e);return a===void 0||n.call(e,a)},c=function(e,t){i&&t.name===`__proto__`?i(e,t.name,{enumerable:!0,configurable:!0,value:t.newValue,writable:!0}):e[t.name]=t.newValue},l=function(e,t){if(t===`__proto__`){if(!n.call(e,t))return;if(a)return a(e,t).value}return e[t]};t.exports=function e(){var t,n,r,i,a,u,d=arguments[0],f=1,p=arguments.length,m=!1;for(typeof d==`boolean`&&(m=d,d=arguments[1]||{},f=2),(d==null||typeof d!=`object`&&typeof d!=`function`)&&(d={});f<p;++f)if(t=arguments[f],t!=null)for(n in t)r=l(d,n),i=l(t,n),d!==i&&(m&&i&&(s(i)||(a=o(i)))?(a?(a=!1,u=r&&o(r)?r:[]):u=r&&s(r)?r:{},c(d,{name:n,newValue:e(m,u,i)})):i!==void 0&&c(d,{name:n,newValue:i}));return d}}));function W7(e){if(typeof e!=`object`||!e)return!1;let t=Object.getPrototypeOf(e);return(t===null||t===Object.prototype||Object.getPrototypeOf(t)===null)&&!(Symbol.toStringTag in e)&&!(Symbol.iterator in e)}function NZe(){let e=[],t={run:n,use:r};return t;function n(...t){let n=-1,r=t.pop();if(typeof r!=`function`)throw TypeError(`Expected function as last argument, not `+r);i(null,...t);function i(a,...o){let s=e[++n],c=-1;if(a){r(a);return}for(;++c<t.length;)(o[c]===null||o[c]===void 0)&&(o[c]=t[c]);t=o,s?PZe(s,i)(...o):r(null,...o)}}function r(n){if(typeof n!=`function`)throw TypeError("Expected `middelware` to be a function, not "+n);return e.push(n),t}}function PZe(e,t){let n;return r;function r(...t){let r=e.length>t.length,o;r&&t.push(i);try{o=e.apply(this,t)}catch(e){let t=e;if(r&&n)throw t;return i(t)}r||(o&&o.then&&typeof o.then==`function`?o.then(a,i):o instanceof Error?i(o):a(o))}function i(e,...r){n||(n=!0,t(e,...r))}function a(e){i(null,e)}}var G7={basename:FZe,dirname:IZe,extname:LZe,join:RZe,sep:`/`};function FZe(e,t){if(t!==void 0&&typeof t!=`string`)throw TypeError(`"ext" argument must be a string`);K7(e);let n=0,r=-1,i=e.length,a;if(t===void 0||t.length===0||t.length>e.length){for(;i--;)if(e.codePointAt(i)===47){if(a){n=i+1;break}}else r<0&&(a=!0,r=i+1);return r<0?``:e.slice(n,r)}if(t===e)return``;let o=-1,s=t.length-1;for(;i--;)if(e.codePointAt(i)===47){if(a){n=i+1;break}}else o<0&&(a=!0,o=i+1),s>-1&&(e.codePointAt(i)===t.codePointAt(s--)?s<0&&(r=i):(s=-1,r=o));return n===r?r=o:r<0&&(r=e.length),e.slice(n,r)}function IZe(e){if(K7(e),e.length===0)return`.`;let t=-1,n=e.length,r;for(;--n;)if(e.codePointAt(n)===47){if(r){t=n;break}}else r||=!0;return t<0?e.codePointAt(0)===47?`/`:`.`:t===1&&e.codePointAt(0)===47?`//`:e.slice(0,t)}function LZe(e){K7(e);let t=e.length,n=-1,r=0,i=-1,a=0,o;for(;t--;){let s=e.codePointAt(t);if(s===47){if(o){r=t+1;break}continue}n<0&&(o=!0,n=t+1),s===46?i<0?i=t:a!==1&&(a=1):i>-1&&(a=-1)}return i<0||n<0||a===0||a===1&&i===n-1&&i===r+1?``:e.slice(i,n)}function RZe(...e){let t=-1,n;for(;++t<e.length;)K7(e[t]),e[t]&&(n=n===void 0?e[t]:n+`/`+e[t]);return n===void 0?`.`:zZe(n)}function zZe(e){K7(e);let t=e.codePointAt(0)===47,n=BZe(e,!t);return n.length===0&&!t&&(n=`.`),n.length>0&&e.codePointAt(e.length-1)===47&&(n+=`/`),t?`/`+n:n}function BZe(e,t){let n=``,r=0,i=-1,a=0,o=-1,s,c;for(;++o<=e.length;){if(o<e.length)s=e.codePointAt(o);else if(s===47)break;else s=47;if(s===47){if(!(i===o-1||a===1))if(i!==o-1&&a===2){if(n.length<2||r!==2||n.codePointAt(n.length-1)!==46||n.codePointAt(n.length-2)!==46){if(n.length>2){if(c=n.lastIndexOf(`/`),c!==n.length-1){c<0?(n=``,r=0):(n=n.slice(0,c),r=n.length-1-n.lastIndexOf(`/`)),i=o,a=0;continue}}else if(n.length>0){n=``,r=0,i=o,a=0;continue}}t&&(n=n.length>0?n+`/..`:`..`,r=2)}else n.length>0?n+=`/`+e.slice(i+1,o):n=e.slice(i+1,o),r=o-i-1;i=o,a=0}else s===46&&a>-1?a++:a=-1}return n}function K7(e){if(typeof e!=`string`)throw TypeError(`Path must be a string. Received `+JSON.stringify(e))}var VZe={cwd:HZe};function HZe(){return`/`}function q7(e){return!!(typeof e==`object`&&e&&`href`in e&&e.href&&`protocol`in e&&e.protocol&&e.auth===void 0)}function UZe(e){if(typeof e==`string`)e=new URL(e);else if(!q7(e)){let t=TypeError('The "path" argument must be of type string or an instance of URL. Received `'+e+"`");throw t.code=`ERR_INVALID_ARG_TYPE`,t}if(e.protocol!==`file:`){let e=TypeError(`The URL must be of scheme file`);throw e.code=`ERR_INVALID_URL_SCHEME`,e}return WZe(e)}function WZe(e){if(e.hostname!==``){let e=TypeError(`File URL host must be "localhost" or empty on darwin`);throw e.code=`ERR_INVALID_FILE_URL_HOST`,e}let t=e.pathname,n=-1;for(;++n<t.length;)if(t.codePointAt(n)===37&&t.codePointAt(n+1)===50){let e=t.codePointAt(n+2);if(e===70||e===102){let e=TypeError(`File URL path must not include encoded / characters`);throw e.code=`ERR_INVALID_FILE_URL_PATH`,e}}return decodeURIComponent(t)}var J7=[`history`,`path`,`basename`,`stem`,`extname`,`dirname`],GZe=class{constructor(e){let t;t=e?q7(e)?{path:e}:typeof e==`string`||qZe(e)?{value:e}:e:{},this.cwd=`cwd`in t?``:VZe.cwd(),this.data={},this.history=[],this.messages=[],this.value,this.map,this.result,this.stored;let n=-1;for(;++n<J7.length;){let e=J7[n];e in t&&t[e]!==void 0&&t[e]!==null&&(this[e]=e===`history`?[...t[e]]:t[e])}let r;for(r in t)J7.includes(r)||(this[r]=t[r])}get basename(){return typeof this.path==`string`?G7.basename(this.path):void 0}set basename(e){X7(e,`basename`),Y7(e,`basename`),this.path=G7.join(this.dirname||``,e)}get dirname(){return typeof this.path==`string`?G7.dirname(this.path):void 0}set dirname(e){KZe(this.basename,`dirname`),this.path=G7.join(e||``,this.basename)}get extname(){return typeof this.path==`string`?G7.extname(this.path):void 0}set extname(e){if(Y7(e,`extname`),KZe(this.dirname,`extname`),e){if(e.codePointAt(0)!==46)throw Error("`extname` must start with `.`");if(e.includes(`.`,1))throw Error("`extname` cannot contain multiple dots")}this.path=G7.join(this.dirname,this.stem+(e||``))}get path(){return this.history[this.history.length-1]}set path(e){q7(e)&&(e=UZe(e)),X7(e,`path`),this.path!==e&&this.history.push(e)}get stem(){return typeof this.path==`string`?G7.basename(this.path,this.extname):void 0}set stem(e){X7(e,`stem`),Y7(e,`stem`),this.path=G7.join(this.dirname||``,e+(this.extname||``))}fail(e,t,n){let r=this.message(e,t,n);throw r.fatal=!0,r}info(e,t,n){let r=this.message(e,t,n);return r.fatal=void 0,r}message(e,t,n){let r=new a7(e,t,n);return this.path&&(r.name=this.path+`:`+r.name,r.file=this.path),r.fatal=!1,this.messages.push(r),r}toString(e){return this.value===void 0?``:typeof this.value==`string`?this.value:new TextDecoder(e||void 0).decode(this.value)}};function Y7(e,t){if(e&&e.includes(G7.sep))throw Error("`"+t+"` cannot be a path: did not expect `"+G7.sep+"`")}function X7(e,t){if(!e)throw Error("`"+t+"` cannot be empty")}function KZe(e,t){if(!e)throw Error("Setting `"+t+"` requires `path` to be set too")}function qZe(e){return!!(e&&typeof e==`object`&&`byteLength`in e&&`byteOffset`in e)}var JZe=(function(e){let t=this.constructor.prototype,n=t[e],r=function(){return n.apply(r,arguments)};return Object.setPrototypeOf(r,t),r}),Z7=l(MZe(),1),YZe={}.hasOwnProperty,XZe=new class e extends JZe{constructor(){super(`copy`),this.Compiler=void 0,this.Parser=void 0,this.attachers=[],this.compiler=void 0,this.freezeIndex=-1,this.frozen=void 0,this.namespace={},this.parser=void 0,this.transformers=NZe()}copy(){let t=new e,n=-1;for(;++n<this.attachers.length;){let e=this.attachers[n];t.use(...e)}return t.data((0,Z7.default)(!0,{},this.namespace)),t}data(e,t){return typeof e==`string`?arguments.length===2?(e9(`data`,this.frozen),this.namespace[e]=t,this):YZe.call(this.namespace,e)&&this.namespace[e]||void 0:e?(e9(`data`,this.frozen),this.namespace=e,this):this.namespace}freeze(){if(this.frozen)return this;let e=this;for(;++this.freezeIndex<this.attachers.length;){let[t,...n]=this.attachers[this.freezeIndex];if(n[0]===!1)continue;n[0]===!0&&(n[0]=void 0);let r=t.call(e,...n);typeof r==`function`&&this.transformers.use(r)}return this.frozen=!0,this.freezeIndex=1/0,this}parse(e){this.freeze();let t=t9(e),n=this.parser||this.Parser;return Q7(`parse`,n),n(String(t),t)}process(e,t){let n=this;return this.freeze(),Q7(`process`,this.parser||this.Parser),$7(`process`,this.compiler||this.Compiler),t?r(void 0,t):new Promise(r);function r(r,i){let a=t9(e),o=n.parse(a);n.run(o,a,function(e,t,r){if(e||!t||!r)return s(e);let i=t,a=n.stringify(i,r);eQe(a)?r.value=a:r.result=a,s(e,r)});function s(e,n){e||!n?i(e):r?r(n):t(void 0,n)}}}processSync(e){let t=!1,n;return this.freeze(),Q7(`processSync`,this.parser||this.Parser),$7(`processSync`,this.compiler||this.Compiler),this.process(e,r),QZe(`processSync`,`process`,t),n;function r(e,r){t=!0,jZe(e),n=r}}run(e,t,n){ZZe(e),this.freeze();let r=this.transformers;return!n&&typeof t==`function`&&(n=t,t=void 0),n?i(void 0,n):new Promise(i);function i(i,a){let o=t9(t);r.run(e,o,s);function s(t,r,o){let s=r||e;t?a(t):i?i(s):n(void 0,s,o)}}}runSync(e,t){let n=!1,r;return this.run(e,t,i),QZe(`runSync`,`run`,n),r;function i(e,t){jZe(e),r=t,n=!0}}stringify(e,t){this.freeze();let n=t9(t),r=this.compiler||this.Compiler;return $7(`stringify`,r),ZZe(e),r(e,n)}use(e,...t){let n=this.attachers,r=this.namespace;if(e9(`use`,this.frozen),e!=null)if(typeof e==`function`)s(e,t);else if(typeof e==`object`)Array.isArray(e)?o(e):a(e);else throw TypeError("Expected usable value, not `"+e+"`");return this;function i(e){if(typeof e==`function`)s(e,[]);else if(typeof e==`object`)if(Array.isArray(e)){let[t,...n]=e;s(t,n)}else a(e);else throw TypeError("Expected usable value, not `"+e+"`")}function a(e){if(!(`plugins`in e)&&!(`settings`in e))throw Error("Expected usable value but received an empty preset, which is probably a mistake: presets typically come with `plugins` and sometimes with `settings`, but this has neither");o(e.plugins),e.settings&&(r.settings=(0,Z7.default)(!0,r.settings,e.settings))}function o(e){let t=-1;if(e!=null)if(Array.isArray(e))for(;++t<e.length;){let n=e[t];i(n)}else throw TypeError("Expected a list of plugins, not `"+e+"`")}function s(e,t){let r=-1,i=-1;for(;++r<n.length;)if(n[r][0]===e){i=r;break}if(i===-1)n.push([e,...t]);else if(t.length>0){let[r,...a]=t,o=n[i][1];W7(o)&&W7(r)&&(r=(0,Z7.default)(!0,o,r)),n[i]=[e,r,...a]}}}}().freeze();function Q7(e,t){if(typeof t!=`function`)throw TypeError("Cannot `"+e+"` without `parser`")}function $7(e,t){if(typeof t!=`function`)throw TypeError("Cannot `"+e+"` without `compiler`")}function e9(e,t){if(t)throw Error("Cannot call `"+e+"` on a frozen processor.\nCreate a new processor first, by calling it: use `processor()` instead of `processor`.")}function ZZe(e){if(!W7(e)||typeof e.type!=`string`)throw TypeError("Expected node, got `"+e+"`")}function QZe(e,t,n){if(!n)throw Error("`"+e+"` finished async. Use `"+t+"` instead")}function t9(e){return $Ze(e)?e:new GZe(e)}function $Ze(e){return!!(e&&typeof e==`object`&&`message`in e&&`messages`in e)}function eQe(e){return typeof e==`string`||tQe(e)}function tQe(e){return!!(e&&typeof e==`object`&&`byteLength`in e&&`byteOffset`in e)}var nQe=[],rQe={allowDangerousHtml:!0},iQe=/^(https?|ircs?|mailto|xmpp)$/i,aQe=[{from:`astPlugins`,id:`remove-buggy-html-in-markdown-parser`},{from:`allowDangerousHtml`,id:`remove-buggy-html-in-markdown-parser`},{from:`allowNode`,id:`replace-allownode-allowedtypes-and-disallowedtypes`,to:`allowElement`},{from:`allowedTypes`,id:`replace-allownode-allowedtypes-and-disallowedtypes`,to:`allowedElements`},{from:`disallowedTypes`,id:`replace-allownode-allowedtypes-and-disallowedtypes`,to:`disallowedElements`},{from:`escapeHtml`,id:`remove-buggy-html-in-markdown-parser`},{from:`includeElementIndex`,id:`#remove-includeelementindex`},{from:`includeNodeIndex`,id:`change-includenodeindex-to-includeelementindex`},{from:`linkTarget`,id:`remove-linktarget`},{from:`plugins`,id:`change-plugins-to-remarkplugins`,to:`remarkPlugins`},{from:`rawSourcePos`,id:`#remove-rawsourcepos`},{from:`renderers`,id:`change-renderers-to-components`,to:`components`},{from:`source`,id:`change-source-to-children`,to:`children`},{from:`sourcePos`,id:`#remove-sourcepos`},{from:`transformImageUri`,id:`#add-urltransform`,to:`urlTransform`},{from:`transformLinkUri`,id:`#add-urltransform`,to:`urlTransform`}];function oQe(e){let t=sQe(e),n=cQe(e);return lQe(t.runSync(t.parse(n),n),e)}function sQe(e){let t=e.rehypePlugins||nQe,n=e.remarkPlugins||nQe,r=e.remarkRehypeOptions?{...e.remarkRehypeOptions,...rQe}:rQe;return XZe().use(SXe).use(n).use(AZe,r).use(t)}function cQe(e){let t=e.children||``,n=new GZe;return typeof t==`string`?n.value=t:``+t,n}function lQe(e,t){let n=t.allowedElements,r=t.allowElement,i=t.components,a=t.disallowedElements,o=t.skipHtml,s=t.unwrapDisallowed,c=t.urlTransform||uQe;for(let e of aQe)Object.hasOwn(t,e.from)&&``+e.from+(e.to?"use `"+e.to+"` instead":`remove it`)+e.id;return t.className&&(e={type:`element`,tagName:`div`,properties:{className:t.className},children:e.type===`root`?e.children:[e]}),xZe(e,l),Oqe(e,{Fragment:G.Fragment,components:i,ignoreInvalidStyle:!0,jsx:G.jsx,jsxs:G.jsxs,passKeys:!0,passNode:!0});function l(e,t,i){if(e.type===`raw`&&i&&typeof t==`number`)return o?i.children.splice(t,1):i.children[t]={type:`text`,value:e.value},t;if(e.type===`element`){let t;for(t in u7)if(Object.hasOwn(u7,t)&&Object.hasOwn(e.properties,t)){let n=e.properties[t],r=u7[t];(r===null||r.includes(e.tagName))&&(e.properties[t]=c(String(n||``),t,e))}}if(e.type===`element`){let o=n?!n.includes(e.tagName):a?a.includes(e.tagName):!1;if(!o&&r&&typeof t==`number`&&(o=!r(e,t,i)),o&&i&&typeof t==`number`)return s&&e.children?i.children.splice(t,1,...e.children):i.children.splice(t,1),t}}}function uQe(e){let t=e.indexOf(`:`),n=e.indexOf(`?`),r=e.indexOf(`#`),i=e.indexOf(`/`);return t===-1||i!==-1&&t>i||n!==-1&&t>n||r!==-1&&t>r||iQe.test(e.slice(0,t))?e:``}bQe.peek=yQe;function dQe(){this.buffer()}function fQe(e){this.enter({type:`footnoteReference`,identifier:``,label:``},e)}function pQe(){this.buffer()}function mQe(e){this.enter({type:`footnoteDefinition`,identifier:``,label:``,children:[]},e)}function hQe(e){let t=this.resume(),n=this.stack[this.stack.length-1];n.type,n.identifier=m7(this.sliceSerialize(e)).toLowerCase(),n.label=t}function gQe(e){this.exit(e)}function _Qe(e){let t=this.resume(),n=this.stack[this.stack.length-1];n.type,n.identifier=m7(this.sliceSerialize(e)).toLowerCase(),n.label=t}function vQe(e){this.exit(e)}function yQe(){return`[`}function bQe(e,t,n,r){let i=n.createTracker(r),a=i.move(`[^`),o=n.enter(`footnoteReference`),s=n.enter(`reference`);return a+=i.move(n.safe(n.associationId(e),{after:`]`,before:a})),s(),o(),a+=i.move(`]`),a}function xQe(){return{enter:{gfmFootnoteCallString:dQe,gfmFootnoteCall:fQe,gfmFootnoteDefinitionLabelString:pQe,gfmFootnoteDefinition:mQe},exit:{gfmFootnoteCallString:hQe,gfmFootnoteCall:gQe,gfmFootnoteDefinitionLabelString:_Qe,gfmFootnoteDefinition:vQe}}}TQe.peek=EQe;function SQe(){return{canContainEols:[`delete`],enter:{strikethrough:CQe},exit:{strikethrough:wQe}}}function CQe(e){this.enter({type:`delete`,children:[]},e)}function wQe(e){this.exit(e)}function TQe(e,t,n,r){let i=n.createTracker(r),a=n.enter(`strikethrough`),o=i.move(`~~`);return o+=n.containerPhrasing(e,{...i.current(),before:o,after:`~`}),o+=i.move(`~~`),a(),o}function EQe(){return`~`}function DQe(){return{enter:{table:OQe,tableData:jQe,tableHeader:jQe,tableRow:AQe},exit:{codeText:MQe,table:kQe,tableData:n9,tableHeader:n9,tableRow:n9}}}function OQe(e){let t=e._align;this.enter({type:`table`,align:t.map(function(e){return e===`none`?null:e}),children:[]},e),this.data.inTable=!0}function kQe(e){this.exit(e),this.data.inTable=void 0}function AQe(e){this.enter({type:`tableRow`,children:[]},e)}function n9(e){this.exit(e)}function jQe(e){this.enter({type:`tableCell`,children:[]},e)}function MQe(e){let t=this.resume();this.data.inTable&&(t=t.replace(/\\([\\|])/g,NQe));let n=this.stack[this.stack.length-1];n.type,n.value=t,this.exit(e)}function NQe(e,t){return t===`|`?t:e}function PQe(){return{exit:{taskListCheckValueChecked:FQe,taskListCheckValueUnchecked:FQe,paragraph:IQe}}}function FQe(e){let t=this.stack[this.stack.length-2];t.type,t.checked=e.type===`taskListCheckValueChecked`}function IQe(e){let t=this.stack[this.stack.length-2];if(t&&t.type===`listItem`&&typeof t.checked==`boolean`){let e=this.stack[this.stack.length-1];e.type;let n=e.children[0];if(n&&n.type===`text`){let r=t.children,i=-1,a;for(;++i<r.length;){let e=r[i];if(e.type===`paragraph`){a=e;break}}a===e&&(n.value=n.value.slice(1),n.value.length===0?e.children.shift():e.position&&n.position&&typeof n.position.start.offset==`number`&&(n.position.start.column++,n.position.start.offset++,e.position.start=Object.assign({},n.position.start)))}}this.exit(e)}var LQe={tokenize:GQe,partial:!0};function RQe(){return{document:{91:{name:`gfmFootnoteDefinition`,tokenize:HQe,continuation:{tokenize:UQe},exit:WQe}},text:{91:{name:`gfmFootnoteCall`,tokenize:VQe},93:{name:`gfmPotentialFootnoteCall`,add:`after`,tokenize:zQe,resolveTo:BQe}}}}function zQe(e,t,n){let r=this,i=r.events.length,a=r.parser.gfmFootnotes||(r.parser.gfmFootnotes=[]),o;for(;i--;){let e=r.events[i][1];if(e.type===`labelImage`){o=e;break}if(e.type===`gfmFootnoteCall`||e.type===`labelLink`||e.type===`label`||e.type===`image`||e.type===`link`)break}return s;function s(i){if(!o||!o._balanced)return n(i);let s=m7(r.sliceSerialize({start:o.end,end:r.now()}));return s.codePointAt(0)!==94||!a.includes(s.slice(1))?n(i):(e.enter(`gfmFootnoteCallLabelMarker`),e.consume(i),e.exit(`gfmFootnoteCallLabelMarker`),t(i))}}function BQe(e,t){let n=e.length;for(;n--;)if(e[n][1].type===`labelImage`&&e[n][0]===`enter`){e[n][1];break}e[n+1][1].type=`data`,e[n+3][1].type=`gfmFootnoteCallLabelMarker`;let r={type:`gfmFootnoteCall`,start:Object.assign({},e[n+3][1].start),end:Object.assign({},e[e.length-1][1].end)},i={type:`gfmFootnoteCallMarker`,start:Object.assign({},e[n+3][1].end),end:Object.assign({},e[n+3][1].end)};i.end.column++,i.end.offset++,i.end._bufferIndex++;let a={type:`gfmFootnoteCallString`,start:Object.assign({},i.end),end:Object.assign({},e[e.length-1][1].start)},o={type:`chunkString`,contentType:`string`,start:Object.assign({},a.start),end:Object.assign({},a.end)},s=[e[n+1],e[n+2],[`enter`,r,t],e[n+3],e[n+4],[`enter`,i,t],[`exit`,i,t],[`enter`,a,t],[`enter`,o,t],[`exit`,o,t],[`exit`,a,t],e[e.length-2],e[e.length-1],[`exit`,r,t]];return e.splice(n,e.length-n+1,...s),e}function VQe(e,t,n){let r=this,i=r.parser.gfmFootnotes||(r.parser.gfmFootnotes=[]),a=0,o;return s;function s(t){return e.enter(`gfmFootnoteCall`),e.enter(`gfmFootnoteCallLabelMarker`),e.consume(t),e.exit(`gfmFootnoteCallLabelMarker`),c}function c(t){return t===94?(e.enter(`gfmFootnoteCallMarker`),e.consume(t),e.exit(`gfmFootnoteCallMarker`),e.enter(`gfmFootnoteCallString`),e.enter(`chunkString`).contentType=`string`,l):n(t)}function l(s){if(a>999||s===93&&!o||s===null||s===91||b7(s))return n(s);if(s===93){e.exit(`chunkString`);let a=e.exit(`gfmFootnoteCallString`);return i.includes(m7(r.sliceSerialize(a)))?(e.enter(`gfmFootnoteCallLabelMarker`),e.consume(s),e.exit(`gfmFootnoteCallLabelMarker`),e.exit(`gfmFootnoteCall`),t):n(s)}return b7(s)||(o=!0),a++,e.consume(s),s===92?u:l}function u(t){return t===91||t===92||t===93?(e.consume(t),a++,l):l(t)}}function HQe(e,t,n){let r=this,i=r.parser.gfmFootnotes||(r.parser.gfmFootnotes=[]),a,o=0,s;return c;function c(t){return e.enter(`gfmFootnoteDefinition`)._container=!0,e.enter(`gfmFootnoteDefinitionLabel`),e.enter(`gfmFootnoteDefinitionLabelMarker`),e.consume(t),e.exit(`gfmFootnoteDefinitionLabelMarker`),l}function l(t){return t===94?(e.enter(`gfmFootnoteDefinitionMarker`),e.consume(t),e.exit(`gfmFootnoteDefinitionMarker`),e.enter(`gfmFootnoteDefinitionLabelString`),e.enter(`chunkString`).contentType=`string`,u):n(t)}function u(t){if(o>999||t===93&&!s||t===null||t===91||b7(t))return n(t);if(t===93){e.exit(`chunkString`);let n=e.exit(`gfmFootnoteDefinitionLabelString`);return a=m7(r.sliceSerialize(n)),e.enter(`gfmFootnoteDefinitionLabelMarker`),e.consume(t),e.exit(`gfmFootnoteDefinitionLabelMarker`),e.exit(`gfmFootnoteDefinitionLabel`),f}return b7(t)||(s=!0),o++,e.consume(t),t===92?d:u}function d(t){return t===91||t===92||t===93?(e.consume(t),o++,u):u(t)}function f(t){return t===58?(e.enter(`definitionMarker`),e.consume(t),e.exit(`definitionMarker`),i.includes(a)||i.push(a),w7(e,p,`gfmFootnoteDefinitionWhitespace`)):n(t)}function p(e){return t(e)}}function UQe(e,t,n){return e.check(O7,t,e.attempt(LQe,t,n))}function WQe(e){e.exit(`gfmFootnoteDefinition`)}function GQe(e,t,n){let r=this;return w7(e,i,`gfmFootnoteDefinitionIndent`,5);function i(e){let i=r.events[r.events.length-1];return i&&i[1].type===`gfmFootnoteDefinitionIndent`&&i[2].sliceSerialize(i[1],!0).length===4?t(e):n(e)}}function KQe(e){let t=(e||{}).singleTilde,n={name:`strikethrough`,tokenize:i,resolveAll:r};return t??=!0,{text:{126:n},insideSpan:{null:[n]},attentionMarkers:{null:[126]}};function r(e,t){let n=-1;for(;++n<e.length;)if(e[n][0]===`enter`&&e[n][1].type===`strikethroughSequenceTemporary`&&e[n][1]._close){let r=n;for(;r--;)if(e[r][0]===`exit`&&e[r][1].type===`strikethroughSequenceTemporary`&&e[r][1]._open&&e[n][1].end.offset-e[n][1].start.offset===e[r][1].end.offset-e[r][1].start.offset){e[n][1].type=`strikethroughSequence`,e[r][1].type=`strikethroughSequence`;let i={type:`strikethrough`,start:Object.assign({},e[r][1].start),end:Object.assign({},e[n][1].end)},a={type:`strikethroughText`,start:Object.assign({},e[r][1].end),end:Object.assign({},e[n][1].start)},o=[[`enter`,i,t],[`enter`,e[r][1],t],[`exit`,e[r][1],t],[`enter`,a,t]],s=t.parser.constructs.insideSpan.null;s&&f7(o,o.length,0,E7(s,e.slice(r+1,n),t)),f7(o,o.length,0,[[`exit`,a,t],[`enter`,e[n][1],t],[`exit`,e[n][1],t],[`exit`,i,t]]),f7(e,r-1,n-r+3,o),n=r+o.length-2;break}}for(n=-1;++n<e.length;)e[n][1].type===`strikethroughSequenceTemporary`&&(e[n][1].type=`data`);return e}function i(e,n,r){let i=this.previous,a=this.events,o=0;return s;function s(t){return i===126&&a[a.length-1][1].type!==`characterEscape`?r(t):(e.enter(`strikethroughSequenceTemporary`),c(t))}function c(a){let s=T7(i);if(a===126)return o>1?r(a):(e.consume(a),o++,c);if(o<2&&!t)return r(a);let l=e.exit(`strikethroughSequenceTemporary`),u=T7(a);return l._open=!u||u===2&&!!s,l._close=!s||s===2&&!!u,n(a)}}}var qQe=class{constructor(){this.map=[]}add(e,t,n){JQe(this,e,t,n)}consume(e){if(this.map.sort(function(e,t){return e[0]-t[0]}),this.map.length===0)return;let t=this.map.length,n=[];for(;t>0;)--t,n.push(e.slice(this.map[t][0]+this.map[t][1]),this.map[t][2]),e.length=this.map[t][0];n.push(e.slice()),e.length=0;let r=n.pop();for(;r;){for(let t of r)e.push(t);r=n.pop()}this.map.length=0}};function JQe(e,t,n,r){let i=0;if(!(n===0&&r.length===0)){for(;i<e.map.length;){if(e.map[i][0]===t){e.map[i][1]+=n,e.map[i][2].push(...r);return}i+=1}e.map.push([t,n,r])}}function YQe(e,t){let n=!1,r=[];for(;t<e.length;){let i=e[t];if(n){if(i[0]===`enter`)i[1].type===`tableContent`&&r.push(e[t+1][1].type===`tableDelimiterMarker`?`left`:`none`);else if(i[1].type===`tableContent`){if(e[t-1][1].type===`tableDelimiterMarker`){let e=r.length-1;r[e]=r[e]===`left`?`center`:`right`}}else if(i[1].type===`tableDelimiterRow`)break}else i[0]===`enter`&&i[1].type===`tableDelimiterRow`&&(n=!0);t+=1}return r}function XQe(){return{flow:{null:{name:`table`,tokenize:ZQe,resolveAll:QQe}}}}function ZQe(e,t,n){let r=this,i=0,a=0,o;return s;function s(e){let t=r.events.length-1;for(;t>-1;){let e=r.events[t][1].type;if(e===`lineEnding`||e===`linePrefix`)t--;else break}let i=t>-1?r.events[t][1].type:null,a=i===`tableHead`||i===`tableRow`?S:c;return a===S&&r.parser.lazy[r.now().line]?n(e):a(e)}function c(t){return e.enter(`tableHead`),e.enter(`tableRow`),l(t)}function l(e){return e===124?u(e):(o=!0,a+=1,u(e))}function u(t){return t===null?n(t):y7(t)?a>1?(a=0,r.interrupt=!0,e.exit(`tableRow`),e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),p):n(t):x7(t)?w7(e,u,`whitespace`)(t):(a+=1,o&&(o=!1,i+=1),t===124?(e.enter(`tableCellDivider`),e.consume(t),e.exit(`tableCellDivider`),o=!0,u):(e.enter(`data`),d(t)))}function d(t){return t===null||t===124||b7(t)?(e.exit(`data`),u(t)):(e.consume(t),t===92?f:d)}function f(t){return t===92||t===124?(e.consume(t),d):d(t)}function p(t){return r.interrupt=!1,r.parser.lazy[r.now().line]?n(t):(e.enter(`tableDelimiterRow`),o=!1,x7(t)?w7(e,m,`linePrefix`,r.parser.constructs.disable.null.includes(`codeIndented`)?void 0:4)(t):m(t))}function m(t){return t===45||t===58?g(t):t===124?(o=!0,e.enter(`tableCellDivider`),e.consume(t),e.exit(`tableCellDivider`),h):x(t)}function h(t){return x7(t)?w7(e,g,`whitespace`)(t):g(t)}function g(t){return t===58?(a+=1,o=!0,e.enter(`tableDelimiterMarker`),e.consume(t),e.exit(`tableDelimiterMarker`),_):t===45?(a+=1,_(t)):t===null||y7(t)?b(t):x(t)}function _(t){return t===45?(e.enter(`tableDelimiterFiller`),v(t)):x(t)}function v(t){return t===45?(e.consume(t),v):t===58?(o=!0,e.exit(`tableDelimiterFiller`),e.enter(`tableDelimiterMarker`),e.consume(t),e.exit(`tableDelimiterMarker`),y):(e.exit(`tableDelimiterFiller`),y(t))}function y(t){return x7(t)?w7(e,b,`whitespace`)(t):b(t)}function b(n){return n===124?m(n):n===null||y7(n)?!o||i!==a?x(n):(e.exit(`tableDelimiterRow`),e.exit(`tableHead`),t(n)):x(n)}function x(e){return n(e)}function S(t){return e.enter(`tableRow`),C(t)}function C(n){return n===124?(e.enter(`tableCellDivider`),e.consume(n),e.exit(`tableCellDivider`),C):n===null||y7(n)?(e.exit(`tableRow`),t(n)):x7(n)?w7(e,C,`whitespace`)(n):(e.enter(`data`),w(n))}function w(t){return t===null||t===124||b7(t)?(e.exit(`data`),C(t)):(e.consume(t),t===92?T:w)}function T(t){return t===92||t===124?(e.consume(t),w):w(t)}}function QQe(e,t){let n=-1,r=!0,i=0,a=[0,0,0,0],o=[0,0,0,0],s=!1,c=0,l,u,d,f=new qQe;for(;++n<e.length;){let p=e[n],m=p[1];p[0]===`enter`?m.type===`tableHead`?(s=!1,c!==0&&($Qe(f,t,c,l,u),u=void 0,c=0),l={type:`table`,start:Object.assign({},m.start),end:Object.assign({},m.end)},f.add(n,0,[[`enter`,l,t]])):m.type===`tableRow`||m.type===`tableDelimiterRow`?(r=!0,d=void 0,a=[0,0,0,0],o=[0,n+1,0,0],s&&(s=!1,u={type:`tableBody`,start:Object.assign({},m.start),end:Object.assign({},m.end)},f.add(n,0,[[`enter`,u,t]])),i=m.type===`tableDelimiterRow`?2:u?3:1):i&&(m.type===`data`||m.type===`tableDelimiterMarker`||m.type===`tableDelimiterFiller`)?(r=!1,o[2]===0&&(a[1]!==0&&(o[0]=o[1],d=r9(f,t,a,i,void 0,d),a=[0,0,0,0]),o[2]=n)):m.type===`tableCellDivider`&&(r?r=!1:(a[1]!==0&&(o[0]=o[1],d=r9(f,t,a,i,void 0,d)),a=o,o=[a[1],n,0,0])):m.type===`tableHead`?(s=!0,c=n):m.type===`tableRow`||m.type===`tableDelimiterRow`?(c=n,a[1]===0?o[1]!==0&&(d=r9(f,t,o,i,n,d)):(o[0]=o[1],d=r9(f,t,a,i,n,d)),i=0):i&&(m.type===`data`||m.type===`tableDelimiterMarker`||m.type===`tableDelimiterFiller`)&&(o[3]=n)}for(c!==0&&$Qe(f,t,c,l,u),f.consume(t.events),n=-1;++n<t.events.length;){let e=t.events[n];e[0]===`enter`&&e[1].type===`table`&&(e[1]._align=YQe(t.events,n))}return e}function r9(e,t,n,r,i,a){let o=r===1?`tableHeader`:r===2?`tableDelimiter`:`tableData`;n[0]!==0&&(a.end=Object.assign({},i9(t.events,n[0])),e.add(n[0],0,[[`exit`,a,t]]));let s=i9(t.events,n[1]);if(a={type:o,start:Object.assign({},s),end:Object.assign({},s)},e.add(n[1],0,[[`enter`,a,t]]),n[2]!==0){let i=i9(t.events,n[2]),a=i9(t.events,n[3]),o={type:`tableContent`,start:Object.assign({},i),end:Object.assign({},a)};if(e.add(n[2],0,[[`enter`,o,t]]),r!==2){let r=t.events[n[2]],i=t.events[n[3]];if(r[1].end=Object.assign({},i[1].end),r[1].type=`chunkText`,r[1].contentType=`text`,n[3]>n[2]+1){let t=n[2]+1,r=n[3]-n[2]-1;e.add(t,r,[])}}e.add(n[3]+1,0,[[`exit`,o,t]])}return i!==void 0&&(a.end=Object.assign({},i9(t.events,i)),e.add(i,0,[[`exit`,a,t]]),a=void 0),a}function $Qe(e,t,n,r,i){let a=[],o=i9(t.events,n);i&&(i.end=Object.assign({},o),a.push([`exit`,i,t])),r.end=Object.assign({},o),a.push([`exit`,r,t]),e.add(n+1,0,a)}function i9(e,t){let n=e[t],r=n[0]===`enter`?`start`:`end`;return n[1][r]}var e$e={name:`tasklistCheck`,tokenize:n$e};function t$e(){return{text:{91:e$e}}}function n$e(e,t,n){let r=this;return i;function i(t){return r.previous!==null||!r._gfmTasklistFirstContentOfListItem?n(t):(e.enter(`taskListCheck`),e.enter(`taskListCheckMarker`),e.consume(t),e.exit(`taskListCheckMarker`),a)}function a(t){return b7(t)?(e.enter(`taskListCheckValueUnchecked`),e.consume(t),e.exit(`taskListCheckValueUnchecked`),o):t===88||t===120?(e.enter(`taskListCheckValueChecked`),e.consume(t),e.exit(`taskListCheckValueChecked`),o):n(t)}function o(t){return t===93?(e.enter(`taskListCheckMarker`),e.consume(t),e.exit(`taskListCheckMarker`),e.exit(`taskListCheck`),s):n(t)}function s(r){return y7(r)?t(r):x7(r)?e.check({tokenize:r$e},t,n)(r):n(r)}}function r$e(e,t,n){return w7(e,r,`whitespace`);function r(e){return e===null?n(e):t(e)}}function i$e(){let e=this.data(),t=e.micromarkExtensions||=[],n=e.fromMarkdownExtensions||=[];t.push(RQe(),KQe(),XQe(),t$e()),n.push(xQe(),SQe(),DQe(),PQe())}var a$e=`fileManager.readmeCollapsed`;function o$e({folderId:e}){let{t}=U(),[n,r]=(0,y.useState)(()=>localStorage.getItem(a$e)===`1`);(0,y.useEffect)(()=>{localStorage.setItem(a$e,n?`1`:`0`)},[n]);let{data:i,isLoading:a,error:o}=K({queryKey:[`folder-readme`,e],queryFn:()=>Z.getLibraryFolderReadme(e),retry:!1,staleTime:3e4});return a||o||!i?null:n?(0,G.jsxs)(`div`,{className:`mb-2 lg:mb-0 order-first lg:order-none lg:w-10 lg:flex-shrink-0 lg:h-full`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>r(!1),title:t(`fileManager.readme.show`),"aria-label":t(`fileManager.readme.show`),className:`flex lg:hidden w-full items-center gap-2 px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg hover:bg-bambu-dark/40 transition-colors`,children:[(0,G.jsx)(dc,{className:`w-4 h-4 text-bambu-green flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm font-medium text-white truncate`,children:i.filename}),(0,G.jsx)(Tl,{className:`w-4 h-4 text-bambu-gray flex-shrink-0 ml-auto`})]}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>r(!1),title:t(`fileManager.readme.show`),"aria-label":t(`fileManager.readme.show`),className:`hidden lg:flex h-full w-10 flex-col items-center gap-2 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg hover:bg-bambu-dark/40 transition-colors`,children:[(0,G.jsx)(Tl,{className:`w-4 h-4 text-bambu-green flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-xs font-medium text-bambu-gray [writing-mode:vertical-rl] rotate-180 select-none`,children:t(`fileManager.readme.label`)})]})]}):(0,G.jsxs)(`div`,{className:`mb-4 lg:mb-0 order-first lg:order-none lg:w-80 xl:w-96 lg:flex-shrink-0 lg:h-full flex flex-col bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg overflow-hidden`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2 px-3 py-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 min-w-0`,children:[(0,G.jsx)(dc,{className:`w-4 h-4 text-bambu-green flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm font-medium text-white truncate`,title:i.filename,children:i.filename}),i.truncated&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400 flex-shrink-0`,children:t(`fileManager.readme.truncated`)})]}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>r(!0),title:t(`fileManager.readme.hide`),"aria-label":t(`fileManager.readme.hide`),className:`p-1 rounded text-bambu-gray hover:text-white hover:bg-bambu-dark/40 transition-colors flex-shrink-0`,children:(0,G.jsx)(wl,{className:`w-4 h-4`})})]}),(0,G.jsx)(`div`,{className:`px-4 py-3 border-t border-bambu-dark-tertiary flex-1 overflow-y-auto max-h-96 lg:max-h-none text-sm text-bambu-gray-light leading-relaxed space-y-2`,children:(0,G.jsx)(oQe,{remarkPlugins:[i$e],components:{h1:({children:e})=>(0,G.jsx)(`h1`,{className:`text-lg font-semibold text-white mt-2 mb-1`,children:e}),h2:({children:e})=>(0,G.jsx)(`h2`,{className:`text-base font-semibold text-white mt-2 mb-1`,children:e}),h3:({children:e})=>(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-white mt-2 mb-1`,children:e}),p:({children:e})=>(0,G.jsx)(`p`,{className:`my-1`,children:e}),ul:({children:e})=>(0,G.jsx)(`ul`,{className:`list-disc list-inside space-y-0.5 ml-2`,children:e}),ol:({children:e})=>(0,G.jsx)(`ol`,{className:`list-decimal list-inside space-y-0.5 ml-2`,children:e}),li:({children:e})=>(0,G.jsx)(`li`,{children:e}),code:({children:e,...t})=>t.className?(0,G.jsx)(`code`,{className:`block p-2 bg-bambu-dark rounded text-xs font-mono text-bambu-gray-light overflow-x-auto`,children:e}):(0,G.jsx)(`code`,{className:`px-1 py-0.5 bg-bambu-dark rounded text-xs font-mono text-bambu-green`,children:e}),pre:({children:e})=>(0,G.jsx)(`pre`,{className:`my-2`,children:e}),blockquote:({children:e})=>(0,G.jsx)(`blockquote`,{className:`border-l-2 border-bambu-dark-tertiary pl-3 text-bambu-gray italic`,children:e}),a:({children:e,href:t})=>(0,G.jsx)(`a`,{href:t,target:`_blank`,rel:`noopener noreferrer`,className:`text-bambu-green hover:underline`,children:e}),table:({children:e})=>(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsx)(`table`,{className:`min-w-full text-xs border-collapse`,children:e})}),th:({children:e})=>(0,G.jsx)(`th`,{className:`border border-bambu-dark-tertiary px-2 py-1 text-left font-semibold text-white`,children:e}),td:({children:e})=>(0,G.jsx)(`td`,{className:`border border-bambu-dark-tertiary px-2 py-1`,children:e}),hr:()=>(0,G.jsx)(`hr`,{className:`border-bambu-dark-tertiary my-2`})},children:i.content})})]})}function s$e({open:e,onClose:t,onPickTag:n}){let{t:r}=U(),i=co(),{showToast:a}=Gd(),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(null),[u,d]=(0,y.useState)(``),[f,p]=(0,y.useState)(null),{data:m=[],isLoading:h}=K({queryKey:z5,queryFn:Z.getLibraryTags,enabled:e}),g=()=>{i.invalidateQueries({queryKey:z5}),i.invalidateQueries({queryKey:[`library-files`]})},_=q({mutationFn:async()=>{let e=u.trim();if(!e)throw Error(r(`fileManager.tags.nameRequired`));return c?Z.updateLibraryTag(c.id,e):Z.createLibraryTag(e)},onSuccess:()=>{a(r(c?`fileManager.tags.updated`:`fileManager.tags.created`),`success`),s(!1),l(null),d(``),g()},onError:e=>{a(e.message||r(`fileManager.tags.saveFailed`),`error`)}}),v=q({mutationFn:e=>Z.deleteLibraryTag(e),onSuccess:()=>{a(r(`fileManager.tags.deleted`),`success`),p(null),g()},onError:e=>{a(e.message||r(`fileManager.tags.deleteFailed`),`error`)}}),b=()=>{l(null),d(``),s(!0)},x=e=>{l(e),d(e.name),s(!0)},S=(0,y.useCallback)(()=>{_.isPending||(s(!1),l(null),d(``))},[_.isPending]);(0,y.useEffect)(()=>{if(!e)return;let n=e=>{e.key===`Escape`&&(_.isPending||v.isPending||(o?S():f||t()))};return document.addEventListener(`keydown`,n),()=>document.removeEventListener(`keydown`,n)},[e,o,f,_.isPending,v.isPending,S,t]);let C=e=>{e.preventDefault(),_.mutate()};if(!e)return null;let w=`library-tags-modal-title`,T=`library-tag-editor-title`;return(0,G.jsxs)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60`,onClick:()=>{_.isPending||v.isPending||t()}}),(0,G.jsxs)(`div`,{className:`relative w-full max-w-4xl mx-4 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-2xl max-h-[90vh] flex flex-col`,role:`dialog`,"aria-modal":`true`,"aria-labelledby":w,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-4 px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsxs)(`h2`,{id:w,className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Tu,{className:`w-5 h-5 text-bambu-green`}),r(`fileManager.tags.title`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm mt-0.5`,children:r(`fileManager.tags.subtitle`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(Q,{onClick:b,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),r(`fileManager.tags.add`)]}),(0,G.jsx)(`button`,{type:`button`,className:`p-1.5 text-bambu-gray hover:text-white rounded`,onClick:t,"aria-label":r(`common.close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})})]})]}),(0,G.jsx)(`div`,{className:`overflow-y-auto`,children:h?(0,G.jsxs)(`div`,{className:`flex items-center justify-center py-16 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin mr-2`}),r(`common.loading`)]}):m.length===0?(0,G.jsx)(`div`,{className:`py-16 text-center text-bambu-gray`,children:r(`fileManager.tags.empty`)}):(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary text-left text-bambu-gray`,children:[(0,G.jsx)(`th`,{className:`px-4 py-3 font-medium`,children:r(`fileManager.tags.name`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 font-medium text-right`,children:r(`fileManager.tags.fileCount`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 font-medium text-right w-32`,children:r(`common.actions`)})]})}),(0,G.jsx)(`tbody`,{children:m.map(e=>(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/60 hover:bg-bambu-dark-tertiary/30 ${n?`cursor-pointer`:``}`,onClick:()=>{n&&(n(e.id),t())},children:[(0,G.jsx)(`td`,{className:`px-4 py-3 text-white font-medium`,children:e.name}),(0,G.jsx)(`td`,{className:`px-4 py-3 text-right text-bambu-gray`,children:e.file_count}),(0,G.jsx)(`td`,{className:`px-4 py-3 text-right`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-1`,children:[(0,G.jsx)(`button`,{type:`button`,className:`p-1.5 text-bambu-gray hover:text-bambu-green rounded`,onClick:()=>x(e),title:r(`common.edit`),"aria-label":r(`fileManager.tags.editAria`,{name:e.name}),children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{type:`button`,className:`p-1.5 text-bambu-gray hover:text-red-600 dark:hover:text-red-400 rounded`,onClick:()=>p(e),title:r(`common.delete`),"aria-label":r(`fileManager.tags.deleteAria`,{name:e.name}),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})})]},e.id))})]})})]}),o&&(0,G.jsxs)(`div`,{className:`fixed inset-0 z-[60] flex items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60`,onClick:S}),(0,G.jsxs)(`div`,{className:`relative w-full max-w-md mx-4 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl p-6 shadow-2xl`,role:`dialog`,"aria-modal":`true`,"aria-labelledby":T,children:[(0,G.jsx)(`h3`,{id:T,className:`text-lg font-semibold text-white mb-4`,children:r(c?`fileManager.tags.edit`:`fileManager.tags.add`)}),(0,G.jsxs)(`form`,{onSubmit:C,children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,htmlFor:`library-tag-name`,children:r(`fileManager.tags.name`)}),(0,G.jsx)(`input`,{id:`library-tag-name`,type:`text`,maxLength:64,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green mb-4`,placeholder:r(`fileManager.tags.createPlaceholder`),value:u,onChange:e=>d(e.target.value),autoFocus:!0}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:S,children:r(`common.cancel`)}),(0,G.jsxs)(Q,{type:`submit`,disabled:_.isPending||!u.trim(),children:[_.isPending&&(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),r(`common.save`)]})]})]})]})]}),f&&(0,G.jsx)(rf,{title:r(`fileManager.tags.confirmDelete`,{name:f.name}),message:f.file_count>0?r(`fileManager.tags.confirmDeleteInUseMessage`,{count:f.file_count}):r(`fileManager.tags.confirmDeleteMessage`),confirmText:r(`common.delete`),variant:`danger`,isLoading:v.isPending,onConfirm:()=>v.mutate(f.id),onCancel:()=>p(null)})]})}var c$e=90;function l$e({onClose:e}){let{t}=U(),n=co(),{showToast:r}=Gd(),[i,a]=(0,y.useState)(c$e),[o,s]=(0,y.useState)(!0),[c,l]=(0,y.useState)(i);(0,y.useEffect)(()=>{let e=window.setTimeout(()=>l(i),300);return()=>window.clearTimeout(e)},[i]);let u=K({queryKey:[`library-purge-preview`,c,o],queryFn:()=>Z.previewLibraryPurge(c,o),enabled:c>=1}),d=q({mutationFn:()=>Z.executeLibraryPurge(i,o),onSuccess:i=>{r(t(`libraryPurge.toast.success`,{count:i.moved_to_trash}),`success`),n.invalidateQueries({queryKey:[`library-files`]}),n.invalidateQueries({queryKey:[`library-folders`]}),n.invalidateQueries({queryKey:[`library-trash`]}),n.invalidateQueries({queryKey:[`library-trash-count`]}),e()},onError:e=>r(e.message||t(`libraryPurge.toast.failed`),`error`)});(0,y.useEffect)(()=>{let t=t=>{t.key===`Escape`&&!d.isPending&&e()};return window.addEventListener(`keydown`,t),()=>window.removeEventListener(`keydown`,t)},[e,d.isPending]);let f=u.data,p=f?.count??0,m=f?.total_bytes??0,h=p>0&&!d.isPending;return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-white dark:bg-gray-900 rounded-lg shadow-xl max-w-lg w-full`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-gray-200 dark:border-gray-700`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-gray-900 dark:text-gray-100 flex items-center gap-2`,children:[(0,G.jsx)(Nu,{className:`w-5 h-5`}),t(`libraryPurge.title`)]}),(0,G.jsx)(`button`,{onClick:e,className:`text-gray-400 hover:text-gray-600 dark:hover:text-gray-200`,"aria-label":t(`common.close`),disabled:d.isPending,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-gray-600 dark:text-gray-400`,children:t(`libraryPurge.description`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`purge-days`,className:`block text-sm font-medium text-gray-700 dark:text-gray-300 mb-1`,children:t(`libraryPurge.ageLabel`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`input`,{id:`purge-days`,type:`number`,min:1,max:3650,value:i,onChange:e=>a(Math.max(1,Math.min(3650,parseInt(e.target.value||`0`,10)||0))),className:`w-24 rounded border border-gray-300 dark:border-gray-600 bg-white dark:bg-gray-800 text-sm px-2 py-1 text-gray-900 dark:text-gray-100`}),(0,G.jsx)(`span`,{className:`text-sm text-gray-600 dark:text-gray-400`,children:t(`libraryPurge.days`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 text-sm text-gray-700 dark:text-gray-300`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:o,onChange:e=>s(e.target.checked),className:`rounded border-gray-300`}),t(`libraryPurge.includeNeverPrinted`)]}),(0,G.jsxs)(`div`,{className:`rounded border border-gray-200 dark:border-gray-700 bg-gray-50 dark:bg-gray-800/30 p-3`,children:[(0,G.jsx)(`div`,{className:`text-xs font-semibold uppercase tracking-wide text-gray-600 dark:text-gray-300 mb-2`,children:t(`libraryPurge.effectsTitle`)}),(0,G.jsxs)(`ul`,{className:`text-xs text-gray-700 dark:text-gray-300 space-y-1 list-disc pl-4`,children:[(0,G.jsx)(`li`,{children:t(`libraryPurge.effect1`)}),(0,G.jsx)(`li`,{children:t(`libraryPurge.effect2`)}),(0,G.jsx)(`li`,{children:t(`libraryPurge.effect3`)}),(0,G.jsx)(`li`,{children:t(`libraryPurge.effect4`)})]})]}),(0,G.jsx)(`div`,{className:`rounded border border-gray-200 dark:border-gray-700 bg-gray-50 dark:bg-gray-800/50 p-3`,children:u.isLoading||u.isFetching?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-gray-500 dark:text-gray-400`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),` `,t(`libraryPurge.previewLoading`)]}):u.isError?(0,G.jsx)(`div`,{className:`text-sm text-red-600 dark:text-red-400`,children:u.error?.message??t(`libraryPurge.previewFailed`)}):(0,G.jsxs)(`div`,{className:`text-sm text-gray-900 dark:text-gray-100`,children:[(0,G.jsx)(`div`,{className:`font-medium`,children:t(`libraryPurge.previewSummary`,{count:p,size:Ud(m)})}),f?.sample_filenames&&f.sample_filenames.length>0&&(0,G.jsxs)(`ul`,{className:`mt-2 text-xs text-gray-600 dark:text-gray-400 space-y-0.5 list-disc pl-4`,children:[f.sample_filenames.map(e=>(0,G.jsx)(`li`,{className:`truncate`,children:e},e)),p>f.sample_filenames.length&&(0,G.jsx)(`li`,{className:`list-none italic text-gray-500`,children:t(`libraryPurge.andMore`,{count:p-f.sample_filenames.length})})]})]})}),(0,G.jsxs)(`div`,{className:`flex gap-2 items-start text-xs text-amber-700 dark:text-amber-400 bg-amber-50 dark:bg-amber-900/20 rounded px-3 py-2`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 mt-0.5 shrink-0`}),(0,G.jsx)(`span`,{children:t(`libraryPurge.warning`)})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 p-4 border-t border-gray-200 dark:border-gray-700`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:e,disabled:d.isPending,children:t(`common.cancel`)}),(0,G.jsx)(Q,{variant:`danger`,disabled:!h,onClick:()=>d.mutate(),children:d.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin mr-1`}),t(`libraryPurge.purging`)]}):t(`libraryPurge.confirmCta`,{count:p})})]})]})})}function u$e({parentId:e,onClose:t,onSave:n,isLoading:r,t:i}){let[a,o]=(0,y.useState)(``);return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg w-full max-w-sm border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary`,children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`fileManager.newFolder`)})}),(0,G.jsxs)(`form`,{onSubmit:t=>{t.preventDefault(),n({name:a.trim(),parent_id:e})},className:`p-4 space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:i(`fileManager.folderName`)}),(0,G.jsx)(`input`,{type:`text`,value:a,onChange:e=>o(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:i(`fileManager.folderNamePlaceholder`),autoFocus:!0,required:!0})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 pt-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:t,children:i(`common.cancel`)}),(0,G.jsx)(Q,{type:`submit`,disabled:!a.trim()||r,children:r?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):i(`common.create`)})]})]})]})})}function d$e({onClose:e,onSave:t,isLoading:n,t:r}){let[i,a]=(0,y.useState)(``),[o,s]=(0,y.useState)(``),[c,l]=(0,y.useState)(!0),[u,d]=(0,y.useState)(!1);return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg w-full max-w-md border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(yc,{className:`w-5 h-5 text-bambu-green`}),r(`fileManager.linkExternalFolder`)]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:r(`fileManager.linkExternalFolderDescription`)})]}),(0,G.jsxs)(`form`,{onSubmit:e=>{e.preventDefault(),t({name:i.trim(),external_path:o.trim(),readonly:c,show_hidden:u})},className:`p-4 space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:r(`fileManager.folderName`)}),(0,G.jsx)(`input`,{type:`text`,value:i,onChange:e=>a(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:r(`fileManager.externalFolderNamePlaceholder`),autoFocus:!0,required:!0})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:r(`fileManager.externalPath`)}),(0,G.jsx)(`input`,{type:`text`,value:o,onChange:e=>s(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green font-mono text-sm`,placeholder:`/mnt/nas/3d-prints`,required:!0}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:r(`fileManager.externalPathHelp`)})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`label`,{className:`flex items-center gap-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:c,onChange:e=>l(e.target.checked),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:r(`fileManager.readOnly`)}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[`(`,r(`fileManager.readOnlyHelp`),`)`]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:u,onChange:e=>d(e.target.checked),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:r(`fileManager.showHiddenFiles`)})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 pt-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:e,children:r(`common.cancel`)}),(0,G.jsx)(Q,{type:`submit`,disabled:!i.trim()||!o.trim()||n,children:n?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):r(`fileManager.linkFolder`)})]})]})]})})}var f$e=`<>:"/\\|?*`;function p$e(e){for(let t of e)if(f$e.includes(t)||t.charCodeAt(0)<32)return t;return null}function m$e({type:e,currentName:t,onClose:n,onSave:r,isLoading:i,t:a}){let o=e===`file`?t.match(/(\.gcode\.3mf|\.3mf|\.gcode)$/i)?.[1]??``:``,s=e===`file`&&o?t.slice(0,-o.length):t,[c,l]=(0,y.useState)(s),u=e===`file`?p$e(c):null,d=u?a(`fileManager.invalidFilenameChar`,{char:u}):null;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg w-full max-w-sm border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary`,children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:a(e===`file`?`fileManager.renameFile`:`fileManager.renameFolder`)})}),(0,G.jsxs)(`form`,{onSubmit:n=>{if(n.preventDefault(),d)return;let i=e===`file`?c.trim()+o:c.trim();c.trim()&&i!==t&&r(i)},className:`p-4 space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`common.name`)}),(0,G.jsxs)(`div`,{className:`flex items-center bg-bambu-dark border rounded focus-within:border-bambu-green ${d?`border-red-500`:`border-bambu-dark-tertiary`}`,children:[(0,G.jsx)(`input`,{type:`text`,value:c,onChange:e=>l(e.target.value),className:`flex-1 bg-transparent px-3 py-2 text-white placeholder-bambu-gray focus:outline-none min-w-0`,autoFocus:!0,required:!0}),o&&(0,G.jsx)(`span`,{className:`pr-3 text-bambu-gray text-sm select-none whitespace-nowrap`,children:o})]}),d&&(0,G.jsx)(`p`,{className:`mt-1 text-xs text-red-700 dark:text-red-400`,children:d})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 pt-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:n,children:a(`common.cancel`)}),(0,G.jsx)(Q,{type:`submit`,disabled:!c.trim()||c.trim()===s||!!d||i,children:i?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):a(`common.rename`)})]})]})]})})}function h$e({folders:e,selectedFiles:t,currentFolderId:n,onClose:r,onMove:i,isLoading:a,t:o}){let[s,c]=(0,y.useState)(null),l=(e,t=0)=>{let n=[];for(let r of e)n.push({id:r.id,name:r.name,depth:t}),r.children.length>0&&n.push(...l(r.children,t+1));return n},u=[{id:null,name:o(`fileManager.rootNoFolder`),depth:0},...l(e)];return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg w-full max-w-sm border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary`,children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:o(`fileManager.moveFiles`,{count:t.length})})}),(0,G.jsxs)(`div`,{className:`p-4 space-y-4`,children:[(0,G.jsx)(`div`,{className:`max-h-64 overflow-y-auto space-y-1`,children:u.map(e=>(0,G.jsxs)(`button`,{onClick:()=>c(e.id),disabled:e.id===n,className:`w-full text-left px-3 py-2 rounded transition-colors flex items-center gap-2 ${s===e.id?`bg-bambu-green/20 text-bambu-green`:e.id===n?`opacity-50 cursor-not-allowed text-bambu-gray`:`hover:bg-bambu-dark text-white`}`,style:{paddingLeft:`${12+e.depth*16}px`},children:[(0,G.jsx)(_c,{className:`w-4 h-4`}),e.name,e.id===n&&(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray ml-auto`,children:[`(`,o(`fileManager.current`),`)`]})]},e.id??`root`))}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 pt-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:r,children:o(`common.cancel`)}),(0,G.jsx)(Q,{onClick:()=>i(s),disabled:a,children:a?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):o(`common.move`)})]})]})]})})}function g$e({folder:e,onClose:t,onLink:n,isLoading:r,t:i}){let[a,o]=(0,y.useState)(`project`),[s,c]=(0,y.useState)(e.project_id||e.archive_id||null);(0,y.useState)(()=>{e.archive_id&&o(`archive`)});let{data:l}=K({queryKey:[`projects`],queryFn:()=>Z.getProjects(),select:t=>$G([...t].sort((e,t)=>e.name.localeCompare(t.name)),e.project_id)}),{data:u}=K({queryKey:[`archives-for-link`],queryFn:()=>Z.getArchives(void 0,void 0,100)}),d=()=>{n(a===`project`?{project_id:s,archive_id:0}:{project_id:0,archive_id:s})},f=()=>{n({project_id:0,archive_id:0})},p=e.project_id||e.archive_id;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg w-full max-w-md border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary flex items-center justify-between`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Yc,{className:`w-5 h-5 text-bambu-green`}),i(`fileManager.linkFolder`)]}),(0,G.jsx)(`button`,{onClick:t,className:`p-1 hover:bg-bambu-dark rounded`,children:(0,G.jsx)(td,{className:`w-5 h-5 text-bambu-gray`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`fileManager.linkFolderDescription`,{name:e.name})}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(`button`,{onClick:()=>{o(`project`),c(null)},className:`flex-1 flex items-center justify-center gap-2 px-3 py-2 rounded-lg border transition-colors ${a===`project`?`border-bambu-green bg-bambu-green/10 text-bambu-green`:`border-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(Qo,{className:`w-4 h-4`}),i(`fileManager.project`)]}),(0,G.jsxs)(`button`,{onClick:()=>{o(`archive`),c(null)},className:`flex-1 flex items-center justify-center gap-2 px-3 py-2 rounded-lg border transition-colors ${a===`archive`?`border-bambu-green bg-bambu-green/10 text-bambu-green`:`border-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(Po,{className:`w-4 h-4`}),i(`fileManager.archive`)]})]}),(0,G.jsx)(`div`,{className:`max-h-64 overflow-y-auto space-y-1 bg-bambu-dark rounded-lg p-2`,children:a===`project`?l&&l.length>0?l.map(e=>(0,G.jsxs)(`button`,{onClick:()=>c(e.id),className:`w-full text-left px-3 py-2 rounded transition-colors flex items-center gap-2 ${s===e.id?`bg-bambu-green/20 text-bambu-green`:`hover:bg-bambu-dark-tertiary text-white`}`,children:[(0,G.jsx)(`div`,{className:`w-3 h-3 rounded-full flex-shrink-0`,style:{backgroundColor:e.color||`#00ae42`}}),(0,G.jsx)(`span`,{className:`truncate`,children:e.name})]},e.id)):(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray text-center py-4`,children:i(`fileManager.noProjectsFound`)}):u&&u.length>0?u.map(e=>(0,G.jsxs)(`button`,{onClick:()=>c(e.id),className:`w-full text-left px-3 py-2 rounded transition-colors flex items-center gap-2 ${s===e.id?`bg-bambu-green/20 text-bambu-green`:`hover:bg-bambu-dark-tertiary text-white`}`,children:[(0,G.jsx)(oc,{className:`w-4 h-4 text-bambu-gray flex-shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,children:e.print_name||e.filename})]},e.id)):(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray text-center py-4`,children:i(`fileManager.noArchivesFound`)})})]}),(0,G.jsxs)(`div`,{className:`p-4 border-t border-bambu-dark-tertiary flex justify-between`,children:[p&&(0,G.jsxs)(Q,{variant:`danger`,onClick:f,disabled:r,children:[(0,G.jsx)(zu,{className:`w-4 h-4 mr-2`}),i(`fileManager.unlink`)]}),(0,G.jsxs)(`div`,{className:`flex gap-2 ${p?``:`ml-auto`}`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:t,children:i(`common.cancel`)}),(0,G.jsx)(Q,{onClick:d,disabled:!s||r,children:r?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):i(`fileManager.link`)})]})]})]})})}function _$e({folder:e,selectedFolderId:t,onSelect:n,onDelete:r,onLink:i,onRename:a,depth:o=0,wrapNames:s=!1,defaultExpanded:c=!0,showModified:l=!1,hasPermission:u,t:d}){let[f,p]=(0,y.useState)(c),[m,h]=(0,y.useState)(!1),g=e.children.length>0,_=e.project_id||e.archive_id,v=e.is_external,b=u(`library:delete_all`)||u(`library:delete_own`)&&e.file_count===0&&!g&&!v&&!_,x=b?void 0:u(`library:delete_own`)&&!v&&!_?d(`fileManager.onlyEmptyFoldersDeletable`):d(`fileManager.noPermissionDeleteFolder`);return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`group flex items-center gap-1 px-2 py-1.5 rounded cursor-pointer transition-colors ${t===e.id?`bg-bambu-green/20 text-bambu-green`:`hover:bg-bambu-dark text-white`}`,style:{paddingLeft:`${8+o*12}px`},onClick:()=>n(e.id),children:[g?(0,G.jsx)(`button`,{onClick:e=>{e.stopPropagation(),p(!f)},className:`p-0.5 hover:bg-bambu-dark-tertiary rounded`,children:(0,G.jsx)(ms,{className:`w-3.5 h-3.5 transition-transform ${f?`rotate-90`:``}`})}):(0,G.jsx)(`div`,{className:`w-4.5`}),v?(0,G.jsx)(yc,{className:`w-4 h-4 text-purple-600 dark:text-purple-400 flex-shrink-0`}):(0,G.jsx)(_c,{className:`w-4 h-4 text-bambu-green flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`span`,{className:`block text-sm ${s?`break-all`:`truncate`}`,title:e.name,children:e.name}),l&&e.latest_activity_at&&(0,G.jsxs)(`span`,{className:`mt-0.5 flex items-center gap-1 text-xs text-bambu-gray`,title:d(`fileManager.lastActivity`),children:[(0,G.jsx)(rs,{className:`w-3 h-3 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,children:tp(e.latest_activity_at)})]})]}),_&&(0,G.jsxs)(`button`,{onClick:t=>{t.stopPropagation(),i(e)},className:`flex-shrink-0 flex items-center gap-1 text-xs px-1.5 py-0.5 rounded bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400 hover:bg-blue-200 dark:hover:bg-blue-500/30 transition-colors`,title:`${e.project_name?`Project: ${e.project_name}`:`Archive: ${e.archive_name}`} (click to change)`,children:[(0,G.jsx)(Yc,{className:`w-3 h-3`}),e.project_name?(0,G.jsx)(Qo,{className:`w-3 h-3`}):(0,G.jsx)(Po,{className:`w-3 h-3`})]}),v&&e.external_readonly&&(0,G.jsx)(`span`,{title:d(`fileManager.readOnly`),children:(0,G.jsx)(tl,{className:`w-3 h-3 text-amber-600 dark:text-amber-400 flex-shrink-0`})}),e.file_count>0&&(0,G.jsx)(`span`,{className:`flex-shrink-0 text-xs text-bambu-gray`,children:e.file_count}),!_&&!v&&(0,G.jsx)(`button`,{onClick:t=>{t.stopPropagation(),i(e)},className:`flex-shrink-0 p-1 rounded hover:bg-bambu-dark-tertiary`,title:d(`fileManager.linkToProjectOrArchive`),children:(0,G.jsx)(Yc,{className:`w-3.5 h-3.5 text-bambu-gray hover:text-bambu-green`})}),(0,G.jsx)(`div`,{className:`flex-shrink-0 flex items-center gap-0.5 transition-opacity ${s?``:`can-hover:opacity-0 group-hover:opacity-100 group-focus-within:opacity-100`}`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`button`,{onClick:()=>h(!m),className:`p-1 rounded hover:bg-bambu-dark-tertiary`,children:(0,G.jsx)(Qs,{className:`w-3.5 h-3.5 text-bambu-gray`})}),m&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-10`,onClick:()=>h(!1)}),(0,G.jsxs)(`div`,{className:`absolute right-0 top-full mt-1 z-20 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl py-1 min-w-[120px]`,children:[(0,G.jsxs)(`button`,{className:`w-full px-3 py-1.5 text-left text-sm flex items-center gap-2 ${u(`library:update_all`)?`text-white hover:bg-bambu-dark`:`text-bambu-gray cursor-not-allowed`}`,onClick:()=>{u(`library:update_all`)&&(a(e),h(!1))},disabled:!u(`library:update_all`),title:u(`library:update_all`)?void 0:d(`fileManager.noPermissionRenameFolder`),children:[(0,G.jsx)(kl,{className:`w-3.5 h-3.5`}),d(`common.rename`)]}),(0,G.jsxs)(`button`,{className:`w-full px-3 py-1.5 text-left text-sm flex items-center gap-2 ${u(`library:update_all`)?`text-white hover:bg-bambu-dark`:`text-bambu-gray cursor-not-allowed`}`,onClick:()=>{u(`library:update_all`)&&(i(e),h(!1))},disabled:!u(`library:update_all`),title:u(`library:update_all`)?void 0:d(`fileManager.noPermissionLinkFolder`),children:[(0,G.jsx)(Yc,{className:`w-3.5 h-3.5`}),d(_?`fileManager.changeLink`:`fileManager.linkTo`)]}),(0,G.jsxs)(`button`,{className:`w-full px-3 py-1.5 text-left text-sm flex items-center gap-2 ${b?`text-red-700 dark:text-red-400 hover:bg-bambu-dark`:`text-bambu-gray cursor-not-allowed`}`,onClick:()=>{b&&(r(e.id),h(!1))},disabled:!b,title:x,children:[(0,G.jsx)(Nu,{className:`w-3.5 h-3.5`}),d(`common.delete`)]})]})]})]})})]}),g&&f&&(0,G.jsx)(`div`,{children:e.children.map(e=>(0,G.jsx)(_$e,{folder:e,selectedFolderId:t,onSelect:n,onDelete:r,onLink:i,onRename:a,depth:o+1,wrapNames:s,defaultExpanded:c,showModified:l,hasPermission:u,t:d},e.id))})]})}function v$e({file:e,isSelected:t,onSelect:n,onDelete:r,onDownload:i,onPrint:a,onSlice:o,onOpenInSlicer:s,onRunPipeline:c,useSlicerApi:l,desktopSlicer:u,canSlice:d,onPreview3d:f,onRename:p,onGenerateThumbnail:m,onTagClick:h,thumbnailVersion:g,hasPermission:_,canModify:v,authEnabled:b,showModified:x,t:S}){let[C,w]=(0,y.useState)(null),T=_(`library:read`),E=v(`library`,`update`,e.created_by_id),D=v(`library`,`delete`,e.created_by_id),O=[];return a&&F5(e)&&O.push({label:S(`common.print`),icon:(0,G.jsx)(Ll,{className:`w-4 h-4 text-bambu-green`}),onClick:()=>a(e),disabled:!_(`queue:create`),title:_(`queue:create`)?void 0:S(`fileManager.noPermissionAddToQueue`)}),I5(e,!!l,u)&&(l?o:s)&&O.push({label:S(`slice.action`),icon:l?(0,G.jsx)(Rs,{className:`w-4 h-4`}):(0,G.jsx)(nc,{className:`w-4 h-4`}),onClick:()=>{l?o?.(e):s?.(e)},disabled:!d,title:d?void 0:S(l?`fileManager.noPermissionSlice`:`fileManager.noPermissionDownload`)}),c&&l&&I5(e,!0,u)&&O.push({label:S(`library.runWithPipeline.actionLabel`),icon:(0,G.jsx)(Ml,{className:`w-4 h-4`}),onClick:()=>c(e),disabled:!_(`pipelines:run`),title:_(`pipelines:run`)?void 0:S(`library.runWithPipeline.noPermission`)}),f&&(e.file_type===`3mf`||e.file_type===`gcode`||e.file_type===`stl`||e.file_type===`gcode.3mf`)&&O.push({label:S(`fileManager.preview3d`),icon:(0,G.jsx)(Zo,{className:`w-4 h-4`}),onClick:()=>f(e),disabled:!T,title:T?void 0:S(`fileManager.noPermissionPreview`)}),O.push({label:S(`common.download`),icon:(0,G.jsx)(Ys,{className:`w-4 h-4`}),onClick:()=>i(e.id),disabled:!_(`library:read`),title:_(`library:read`)?void 0:S(`fileManager.noPermissionDownload`)}),p&&O.push({label:S(`common.rename`),icon:(0,G.jsx)(kl,{className:`w-4 h-4`}),onClick:()=>p(e),disabled:!E,title:E?void 0:S(`fileManager.noPermissionRenameFile`)}),m&&e.file_type===`stl`&&O.push({label:S(`fileManager.generateThumbnail`),icon:(0,G.jsx)(Vc,{className:`w-4 h-4`}),onClick:()=>m(e),disabled:!E,title:E?void 0:S(`fileManager.noPermissionGenerateThumbnail`)}),O.push({label:S(`common.delete`),icon:(0,G.jsx)(Nu,{className:`w-4 h-4`}),onClick:()=>r(e.id),danger:!0,disabled:!D,title:D?void 0:S(`fileManager.noPermissionDeleteFile`)}),(0,G.jsxs)(`div`,{className:`group relative bg-bambu-dark-secondary rounded-lg border transition-all cursor-pointer ${t?`border-bambu-green ring-1 ring-bambu-green`:`border-bambu-dark-tertiary hover:border-bambu-green/50`}`,onClick:()=>n(e.id),children:[(0,G.jsxs)(`div`,{className:`aspect-square bg-bambu-dark flex items-center justify-center overflow-hidden rounded-t-lg`,children:[e.thumbnail_path?(0,G.jsx)(`img`,{src:`${Z.getLibraryFileThumbnailUrl(e.id)}${g?(Z.getLibraryFileThumbnailUrl(e.id).includes(`?`)?`&`:`?`)+`v=${g}`:``}`,alt:e.filename,className:`w-full h-full object-cover`}):(0,G.jsx)(oc,{className:`w-12 h-12 text-bambu-gray/30`}),(0,G.jsx)(`div`,{className:`absolute top-2 right-2 text-xs px-1.5 py-0.5 rounded font-medium ${e.file_type===`3mf`?`bg-bambu-green/90 text-white`:e.file_type===`gcode`||e.file_type===`gcode.3mf`?`bg-blue-500/90 text-white`:e.file_type===`stl`?`bg-purple-500/90 text-white`:`bg-bambu-gray/90 text-white`}`,children:e.file_type.toUpperCase()})]}),(0,G.jsxs)(`div`,{className:`p-3`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white truncate`,title:e.print_name||e.filename,children:e.print_name||e.filename}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mt-1 text-xs text-bambu-gray`,children:[(0,G.jsx)(`span`,{children:Ud(e.file_size)}),e.print_time_seconds&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(js,{className:`w-3 h-3`}),op(e.print_time_seconds)]})]}),e.sliced_for_model&&(0,G.jsxs)(`div`,{className:`mt-1 text-xs text-bambu-gray flex items-center gap-1`,children:[(0,G.jsx)(Ll,{className:`w-3 h-3`}),e.sliced_for_model]}),(e.variant_count??0)>1&&(0,G.jsxs)(`div`,{className:`mt-1 text-xs text-bambu-green flex items-center gap-1`,children:[(0,G.jsx)(qc,{className:`w-3 h-3`}),S(`fileManager.variants.badge`,{count:e.variant_count})]}),e.print_count>0&&(0,G.jsx)(`div`,{className:`mt-1 text-xs text-bambu-green`,children:S(`fileManager.printedCount`,{count:e.print_count})}),b&&e.created_by_username&&(0,G.jsxs)(`div`,{className:`mt-1 text-xs text-bambu-gray flex items-center gap-1`,children:[(0,G.jsx)(Vu,{className:`w-3 h-3`}),e.created_by_username]}),x&&(0,G.jsxs)(`div`,{className:`mt-1 text-xs text-bambu-gray flex items-center gap-1`,title:S(`fileManager.lastModified`),children:[(0,G.jsx)(rs,{className:`w-3 h-3`}),tp(e.fs_modified_at??e.created_at)]}),(e.tags?.length??0)>0&&(0,G.jsx)(`div`,{className:`mt-2 flex flex-wrap gap-1`,onClick:e=>e.stopPropagation(),children:e.tags.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>h?.(e.id),className:`inline-flex items-center gap-0.5 px-1.5 py-0.5 rounded-full text-[10px] bg-bambu-green/10 text-bambu-green hover:bg-bambu-green/20 transition-colors max-w-full`,title:e.name,children:[(0,G.jsx)(Tu,{className:`w-2.5 h-2.5 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,children:e.name})]},e.id))})]}),(0,G.jsxs)(`div`,{className:`absolute bottom-2 right-2 transition-opacity can-hover:opacity-0 group-hover:opacity-100 group-focus-within:opacity-100`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(`button`,{onClick:e=>{let t=e.currentTarget.getBoundingClientRect();w({x:t.left,y:t.bottom+4})},className:`p-1.5 rounded bg-bambu-dark-secondary/90 hover:bg-bambu-dark-tertiary`,children:(0,G.jsx)(Qs,{className:`w-4 h-4 text-bambu-gray`})}),C&&(0,G.jsx)(FT,{x:C.x,y:C.y,items:O,onClose:()=>w(null)})]}),(0,G.jsx)(`div`,{className:`absolute top-2 left-2 w-5 h-5 rounded border-2 flex items-center justify-center transition-all ${t?`bg-bambu-green border-bambu-green`:`border-white/30 bg-black/30 can-hover:opacity-0 group-hover:opacity-100 group-focus-within:opacity-100`}`,children:t&&(0,G.jsx)(`div`,{className:`w-2 h-2 bg-white rounded-sm`})})]})}function y$e(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),{hasPermission:r,hasAnyPermission:i,canModify:a,authEnabled:o}=jd(),[s]=Ri(),c=or(),l=s.get(`folder`),[u,d]=(0,y.useState)(l?parseInt(l,10):null),[f,p]=(0,y.useState)(`internal`),[m,h]=(0,y.useState)([]),[g,_]=(0,y.useState)(!1),[v,b]=(0,y.useState)(!1),[x,S]=(0,y.useState)(!1),[C,w]=(0,y.useState)(!1),[T,E]=(0,y.useState)([]),[D,O]=(0,y.useState)(!1),[k,A]=(0,y.useState)(!1),[j,M]=(0,y.useState)(!1),[N,P]=(0,y.useState)([]),[F,I]=(0,y.useState)(null),[L,R]=(0,y.useState)(null),[z,B]=(0,y.useState)(null),[V,ee]=(0,y.useState)(null),[te,ne]=(0,y.useState)(null),[re,ie]=(0,y.useState)(null),[ae,oe]=(0,y.useState)({}),[se,H]=(0,y.useState)(null),[ce,le]=(0,y.useState)(()=>localStorage.getItem(`library-view-mode`)||`grid`),[ue,de]=(0,y.useState)(()=>localStorage.getItem(`library-wrap-folders`)===`true`),[fe,pe]=(0,y.useState)(()=>localStorage.getItem(`library-collapse-folders`)===`true`),[me,he]=(0,y.useState)(()=>localStorage.getItem(`library-folder-sort-field`)===`activity`?`activity`:`name`),[ge,_e]=(0,y.useState)(()=>localStorage.getItem(`library-folder-sort-direction`)===`desc`?`desc`:`asc`),[ve,ye]=(0,y.useState)(()=>{let e=localStorage.getItem(`library-sidebar-width`);return e?parseInt(e,10):256}),[be,xe]=(0,y.useState)(!1),Se=(0,y.useRef)(null);(0,y.useEffect)(()=>{if(!be)return;document.body.style.userSelect=`none`,document.body.style.cursor=`col-resize`;let e=e=>{if(!Se.current)return;let t=Se.current.parentElement?.getBoundingClientRect();if(!t)return;let n=e.clientX-t.left;ye(Math.min(500,Math.max(200,n)))},t=()=>{xe(!1),document.body.style.userSelect=``,document.body.style.cursor=``,localStorage.setItem(`library-sidebar-width`,String(ve))};return document.addEventListener(`mousemove`,e),document.addEventListener(`mouseup`,t),()=>{document.removeEventListener(`mousemove`,e),document.removeEventListener(`mouseup`,t),document.body.style.userSelect=``,document.body.style.cursor=``}},[be,ve]);let[Ce,we]=(0,y.useState)(``),[Te,Ee]=(0,y.useState)(`all`),[De,Oe]=(0,y.useState)(``),[ke,Ae]=(0,y.useState)(()=>localStorage.getItem(`library-sort-field`)||`name`),[je,Me]=(0,y.useState)(()=>localStorage.getItem(`library-sort-direction`)||`asc`),[Ne,Pe]=(0,y.useState)(()=>localStorage.getItem(`library-show-modified`)===`true`);(0,y.useEffect)(()=>{let e=s.get(`folder`);e&&d(parseInt(e,10))},[s]);let{data:Fe}=K({queryKey:[`settings`],queryFn:()=>Z.getSettings()}),Ie=qG(Fe?.open_in_slicer,Fe?.preferred_slicer),Le=(0,y.useCallback)(async t=>{try{let{token:e}=await Z.createLibrarySlicerToken(t.id),n=Z.getLibrarySlicerDownloadUrl(t.id,e,t.filename);ZG(`${window.location.origin}${n}`,Ie)}catch{n(e(`fileManager.toast.openInSlicerFailed`),`error`);let r=Z.getLibraryFileDownloadUrl(t.id);ZG(`${window.location.origin}${r}`,Ie)}},[Ie,n,e]),Re=(0,y.useCallback)(()=>Fe?.use_slicer_api?r(`library:upload`):i(`library:read_all`,`library:read_own`),[Fe?.use_slicer_api,r,i]),{data:ze,isLoading:Be}=K({queryKey:[`library-folders`],queryFn:()=>Z.getLibraryFolders()}),Ve=(0,y.useMemo)(()=>{if(!ze)return ze;let e=t=>[...t].sort((e,t)=>{let n=0;if(me===`name`)n=e.name.localeCompare(t.name);else{let r=e.latest_activity_at?new Date(e.latest_activity_at).getTime():null,i=t.latest_activity_at?new Date(t.latest_activity_at).getTime():null;if(r===null&&i===null)n=e.name.localeCompare(t.name);else if(r===null)return 1;else if(i===null)return-1;else n=r-i}return ge===`asc`?n:-n}).map(t=>({...t,children:e(t.children)}));return e(ze)},[ze,me,ge]),{data:He}=K({queryKey:[`library-trash-count`],queryFn:async()=>{try{return(await Z.listLibraryTrash(1,0)).total}catch{return 0}},staleTime:3e4}),Ue=u!==null&&Ce.trim().length>0,We=(0,y.useMemo)(()=>[...N].sort((e,t)=>e-t),[N]),{data:Ge=[]}=K({queryKey:[`library-tags`],queryFn:Z.getLibraryTags}),Ke=(0,y.useMemo)(()=>{let e=new Map;for(let t of Ge)e.set(t.id,t.name);return e},[Ge]);(0,y.useEffect)(()=>{Ge.length!==0&&P(e=>{let t=e.filter(e=>Ke.has(e));return t.length===e.length?e:t})},[Ge.length,Ke]);let qe=(0,y.useCallback)(e=>{P(t=>t.includes(e)?t.filter(t=>t!==e):[...t,e])},[]),{data:Je,isLoading:Ye}=K({queryKey:[`library-files`,u,f,Ue,We],queryFn:()=>Z.getLibraryFiles(u,!1,void 0,u===null?f:void 0,Ue,We)}),{data:Xe}=K({queryKey:[`library-stats`],queryFn:()=>Z.getLibraryStats()}),{data:Ze}=K({queryKey:[`users`,`slim`],queryFn:()=>Z.getUsersSlim()}),Qe=(0,y.useMemo)(()=>{if(!Je)return[];let e=new Set(Je.map(e=>e.file_type));return Array.from(e).sort()},[Je]),$e=(0,y.useMemo)(()=>{if(!Je)return[];let e=[...Je];if(Ce.trim()){let t=Ce.toLowerCase();e=e.filter(e=>e.filename.toLowerCase().includes(t)||e.print_name&&e.print_name.toLowerCase().includes(t))}if(Te!==`all`&&(e=e.filter(e=>e.file_type===Te)),De.trim()){let t=De.toLowerCase();e=e.filter(e=>e.created_by_username&&e.created_by_username.toLowerCase().includes(t))}return e.sort((e,t)=>{let n=0;switch(ke){case`name`:n=(e.print_name||e.filename).localeCompare(t.print_name||t.filename);break;case`date`:n=(ep(e.fs_modified_at??e.created_at)?.getTime()??0)-(ep(t.fs_modified_at??t.created_at)?.getTime()??0);break;case`size`:n=e.file_size-t.file_size;break;case`type`:n=e.file_type.localeCompare(t.file_type);break;case`prints`:n=e.print_count-t.print_count;break}return je===`asc`?n:-n}),e},[Je,Ce,Te,De,ke,je]),et=(0,y.useMemo)(()=>{if(!Xe||!Fe)return!1;let e=(Fe.library_disk_warning_gb||5)*1024*1024*1024;return Xe.disk_free_bytes<e},[Xe,Fe]),tt=q({mutationFn:e=>Z.createLibraryFolder(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`library-folders`]}),_(!1),n(e(`fileManager.toast.folderCreated`),`success`)},onError:e=>n(e.message,`error`)}),nt=q({mutationFn:async e=>{let t=await Z.createExternalFolder(e);return await Z.scanExternalFolder(t.id),t},onSuccess:r=>{t.invalidateQueries({queryKey:[`library-folders`]}),t.invalidateQueries({queryKey:[`library-files`]}),t.invalidateQueries({queryKey:[`library-stats`]}),b(!1),d(r.id),n(e(`fileManager.toast.externalFolderLinked`),`success`)},onError:e=>n(e.message,`error`)}),rt=q({mutationFn:e=>Z.scanExternalFolder(e),onSuccess:r=>{t.invalidateQueries({queryKey:[`library-files`]}),t.invalidateQueries({queryKey:[`library-folders`]}),t.invalidateQueries({queryKey:[`library-stats`]}),n(e(`fileManager.toast.folderScanned`,{added:r.added,removed:r.removed}),`success`)},onError:e=>n(e.message,`error`)}),it=q({mutationFn:e=>Z.deleteLibraryFolder(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`library-folders`]}),t.invalidateQueries({queryKey:[`library-files`]}),t.invalidateQueries({queryKey:[`library-stats`]}),u===L?.id&&d(null),R(null),n(e(`fileManager.toast.folderDeleted`),`success`)},onError:e=>{R(null),n(e.message,`error`)}}),at=q({mutationFn:e=>Z.deleteLibraryFile(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`library-files`]}),t.invalidateQueries({queryKey:[`library-folders`]}),t.invalidateQueries({queryKey:[`library-stats`]}),t.invalidateQueries({queryKey:[`library-trash-count`]}),h(e=>e.filter(e=>e!==L?.id)),R(null),n(e(`fileManager.toast.fileDeleted`),`success`)},onError:e=>{R(null),n(e.message,`error`)}}),ot=q({mutationFn:e=>Z.createVariantGroup(e.map(e=>({library_file_id:e}))),onSuccess:r=>{t.invalidateQueries({queryKey:[`library-files`]}),n(e(`fileManager.variants.grouped`,{count:r.members.length}),`success`),h([])},onError:e=>n(e.message,`error`)}),st=q({mutationFn:e=>Z.bulkDeleteLibrary(e,[]),onSuccess:(r,i)=>{t.invalidateQueries({queryKey:[`library-files`]}),t.invalidateQueries({queryKey:[`library-folders`]}),t.invalidateQueries({queryKey:[`library-stats`]}),t.invalidateQueries({queryKey:[`library-trash-count`]}),n(e(`fileManager.toast.filesDeleted`,{count:i.length}),`success`),h([]),R(null)},onError:e=>{R(null),n(e.message,`error`)}}),ct=q({mutationFn:({fileIds:e,folderId:t})=>Z.moveLibraryFiles(e,t),onSuccess:()=>{t.invalidateQueries({queryKey:[`library-files`]}),t.invalidateQueries({queryKey:[`library-folders`]}),h([]),S(!1),n(e(`fileManager.toast.filesMoved`),`success`)},onError:e=>n(e.message,`error`)}),lt=q({mutationFn:({id:e,data:t})=>Z.updateLibraryFolder(e,t),onSuccess:(r,i)=>{t.invalidateQueries({queryKey:[`library-folders`]}),t.invalidateQueries({queryKey:[`project-folders`]}),t.invalidateQueries({queryKey:[`archive-folders`]}),I(null),n(i.data.project_id===0&&i.data.archive_id===0?e(`fileManager.toast.folderUnlinked`):e(`fileManager.toast.folderLinked`),`success`)},onError:e=>n(e.message,`error`)}),ut=q({mutationFn:({id:e,filename:t})=>Z.updateLibraryFile(e,{filename:t}),onSuccess:()=>{t.invalidateQueries({queryKey:[`library-files`]}),ie(null),n(e(`fileManager.toast.fileRenamed`),`success`)},onError:e=>{ie(null),n(e.message,`error`)}}),dt=q({mutationFn:({id:e,name:t})=>Z.updateLibraryFolder(e,{name:t}),onSuccess:()=>{t.invalidateQueries({queryKey:[`library-folders`]}),t.invalidateQueries({queryKey:[`library-files`]}),ie(null),n(e(`fileManager.toast.folderRenamed`),`success`)},onError:e=>{ie(null),n(e.message,`error`)}}),ft=q({mutationFn:()=>Z.batchGenerateStlThumbnails({all_missing:!0}),onSuccess:r=>{if(t.invalidateQueries({queryKey:[`library-files`]}),r.succeeded>0){let e=Date.now(),t={};r.results.forEach(n=>{n.success&&(t[n.file_id]=e)}),oe(e=>({...e,...t}))}r.succeeded>0&&r.failed===0?n(e(`fileManager.toast.thumbnailsGenerated`,{count:r.succeeded}),`success`):r.succeeded>0&&r.failed>0?n(e(`fileManager.toast.thumbnailsGeneratedPartial`,{succeeded:r.succeeded,failed:r.failed}),`success`):r.processed===0?n(e(`fileManager.toast.noStlMissingThumbnails`),`info`):n(e(`fileManager.toast.failedToGenerateThumbnails`,{error:r.results[0]?.error||`Unknown error`}),`error`)},onError:e=>n(e.message,`error`)}),pt=q({mutationFn:e=>Z.batchGenerateStlThumbnails({file_ids:[e]}),onSuccess:r=>{if(t.invalidateQueries({queryKey:[`library-files`]}),r.succeeded>0){let t=r.results[0]?.file_id;t&&oe(e=>({...e,[t]:Date.now()})),n(e(`fileManager.toast.thumbnailGenerated`),`success`)}else n(e(`fileManager.toast.failedToGenerateThumbnail`,{error:r.results[0]?.error||`Unknown error`}),`error`)},onError:e=>n(e.message,`error`)}),mt=(0,y.useMemo)(()=>Je?Je.filter(e=>m.includes(e.id)&&F5(e)):[],[Je,m]),{data:ht}=K({queryKey:[`variant-group`,z?.variant_group_id],queryFn:()=>Z.getVariantGroup(z.variant_group_id),enabled:!!z?.variant_group_id}),gt=(0,y.useMemo)(()=>{if(z){if(mt.length>1)return mt.map(e=>({id:e.id,filename:e.filename,sliced_for_model:e.sliced_for_model}));if(ht&&ht.members.length>1)return ht.members.map(e=>({id:e.library_file_id,filename:e.filename,sliced_for_model:e.target_model}))}},[z,mt,ht]),_t=(0,y.useCallback)(e=>{h(t=>t.includes(e)?t.filter(t=>t!==e):[...t,e])},[]),vt=(0,y.useCallback)(()=>{$e.length>0&&h($e.map(e=>e.id))},[$e]),yt=(0,y.useCallback)(()=>{h([])},[]),bt=()=>{t.invalidateQueries({queryKey:[`library-files`]}),t.invalidateQueries({queryKey:[`library-folders`]}),t.invalidateQueries({queryKey:[`library-stats`]})},{isDraggingOver:xt,dragHandlers:St}=eK({disabled:!r(`library:upload`)||C,onFiles:e=>{E(e),w(!0)}}),Ct=e=>{Z.downloadLibraryFile(e).catch(e=>{console.error(`Library file download failed:`,e)})},wt=()=>{L&&(L.type===`file`?at.mutate(L.id):L.type===`folder`?it.mutate(L.id):L.type===`bulk`&&st.mutate(m))},Tt=it.isPending||at.isPending||st.isPending,Et=e=>{le(e),localStorage.setItem(`library-view-mode`,e)},Dt=Be||Ye,Ot=(0,y.useMemo)(()=>{if(!u||!ze)return null;let e=t=>{for(let n of t){if(n.id===u)return n;let t=e(n.children);if(t)return t}return null};return e(ze)},[u,ze]);return(0,G.jsxs)(`div`,{className:`p-4 md:p-8 min-h-[calc(100vh-64px)] lg:h-[calc(100vh-64px)] flex flex-col relative`,...St,children:[xt&&(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 bg-bambu-dark/90 flex items-center justify-center pointer-events-none`,children:(0,G.jsxs)(`div`,{className:`border-4 border-dashed border-bambu-green rounded-xl p-12 text-center`,children:[(0,G.jsx)(Bu,{className:`w-16 h-16 mx-auto mb-4 text-bambu-green`}),(0,G.jsx)(`p`,{className:`text-2xl font-semibold text-white mb-2`,children:e(`fileManager.dropFilesHere`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`fileManager.releaseToUpload`)})]})}),(0,G.jsxs)(`div`,{className:`flex flex-col sm:flex-row sm:items-center justify-between gap-4 mb-6`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(_c,{className:`w-7 h-7 text-bambu-green`}),e(`fileManager.title`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:e(`fileManager.subtitle`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center bg-bambu-dark rounded-lg p-1`,children:[(0,G.jsx)(`button`,{onClick:()=>Et(`grid`),className:`p-1.5 rounded transition-colors ${ce===`grid`?`bg-bambu-dark-secondary text-white`:`text-bambu-gray hover:text-white`}`,title:e(`fileManager.gridView`),children:(0,G.jsx)(Jc,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>Et(`list`),className:`p-1.5 rounded transition-colors ${ce===`list`?`bg-bambu-dark-secondary text-white`:`text-bambu-gray hover:text-white`}`,title:e(`fileManager.listView`),children:(0,G.jsx)($c,{className:`w-4 h-4`})})]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>ft.mutate(),disabled:ft.isPending||!i(`library:update_own`,`library:update_all`),title:i(`library:update_own`,`library:update_all`)?e(`fileManager.generateThumbnailsForMissing`):e(`fileManager.noPermissionGenerateThumbnail`),children:[ft.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 mr-2 animate-spin`}):(0,G.jsx)(Vc,{className:`w-4 h-4 mr-2`}),e(`fileManager.generateThumbnails`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>b(!0),disabled:!r(`library:upload`),title:r(`library:upload`)?e(`fileManager.linkExternalFolder`):e(`fileManager.noPermissionCreateFolder`),children:[(0,G.jsx)(yc,{className:`w-4 h-4 mr-2`}),e(`fileManager.linkExternal`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>_(!0),disabled:!r(`library:upload`),title:r(`library:upload`)?void 0:e(`fileManager.noPermissionCreateFolder`),children:[(0,G.jsx)(vc,{className:`w-4 h-4 mr-2`}),e(`fileManager.newFolder`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>A(!0),title:e(`fileManager.tags.manageTitle`),children:[(0,G.jsx)(Tu,{className:`w-4 h-4 mr-2`}),e(`fileManager.tags.manage`)]}),r(`library:purge`)&&(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>O(!0),title:e(`libraryPurge.headerTooltip`),children:[(0,G.jsx)(Nu,{className:`w-4 h-4 mr-2`}),e(`libraryPurge.headerButton`)]}),i(`library:delete_own`,`library:delete_all`)&&(0,G.jsxs)(Ai,{to:`/files/trash`,className:`inline-flex items-center px-3 py-1.5 text-sm rounded bg-bambu-dark-secondary text-bambu-gray hover:text-white hover:bg-bambu-dark transition-colors`,title:e(`libraryTrash.headerTooltip`),children:[(0,G.jsx)(Nu,{className:`w-4 h-4 mr-2`}),e(`libraryTrash.headerButton`),typeof He==`number`&&He>0&&(0,G.jsx)(`span`,{className:`ml-1.5 px-1.5 py-0.5 text-xs rounded-full bg-bambu-green/20 text-bambu-green`,children:He})]}),(0,G.jsxs)(Q,{onClick:()=>w(!0),disabled:!r(`library:upload`),title:r(`library:upload`)?void 0:e(`fileManager.noPermissionUpload`),children:[(0,G.jsx)(Bu,{className:`w-4 h-4 mr-2`}),e(`common.upload`)]})]})]}),et&&Xe&&Fe&&(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mb-4 p-3 bg-amber-500/10 border border-amber-500/30 rounded-lg`,children:[(0,G.jsx)(Iu,{className:`w-5 h-5 text-amber-500 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`p`,{className:`text-sm text-amber-500 font-medium`,children:e(`fileManager.lowDiskSpaceWarning`)}),(0,G.jsx)(`p`,{className:`text-xs text-amber-500/80`,children:e(`fileManager.lowDiskSpaceDetails`,{free:Ud(Xe.disk_free_bytes),total:Ud(Xe.disk_total_bytes),threshold:Fe.library_disk_warning_gb})})]})]}),Xe&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-3 sm:gap-6 mb-6 p-3 bg-bambu-dark-secondary rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(fc,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[e(`fileManager.files`),`:`]}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:Xe.total_files})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(_c,{className:`w-4 h-4 text-blue-600 dark:text-blue-400`}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[e(`fileManager.folders`),`:`]}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:Xe.total_folders})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(Nc,{className:`w-4 h-4 text-amber-600 dark:text-amber-400`}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[e(`fileManager.size`),`:`]}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:Ud(Xe.total_size_bytes)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm sm:ml-auto`,children:[(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[e(`fileManager.free`),`:`]}),(0,G.jsx)(`span`,{className:`font-medium ${et?`text-amber-500`:`text-white`}`,children:Ud(Xe.disk_free_bytes)})]})]}),(0,G.jsxs)(`div`,{className:`flex-1 flex flex-col lg:flex-row gap-4 lg:gap-6 min-h-0`,children:[(0,G.jsx)(`div`,{className:`lg:hidden`,children:(0,G.jsxs)(`select`,{value:u===null?`__top:${f}`:String(u),onChange:e=>{let t=e.target.value;t.startsWith(`__top:`)?(d(null),p(t.slice(6))):d(parseInt(t,10))},className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg px-3 py-2.5 text-white focus:outline-none focus:border-bambu-green`,children:[(0,G.jsxs)(`option`,{value:`__top:internal`,children:[`📁 `,e(`fileManager.allFiles`)]}),ze?.some(e=>e.is_external)&&(0,G.jsxs)(`option`,{value:`__top:external`,children:[`🔗 `,e(`fileManager.allExternal`)]}),Ve&&(()=>{let e=(t,n=0)=>{let r=[];for(let i of t)r.push({id:i.id,name:i.name,fileCount:i.file_count,depth:n}),i.children.length>0&&r.push(...e(i.children,n+1));return r};return e(Ve).map(e=>(0,G.jsxs)(`option`,{value:e.id,children:[`│ `.repeat(e.depth),`📂 `,e.name,` `,e.fileCount>0?`(${e.fileCount})`:``]},e.id))})()]})}),(0,G.jsxs)(`div`,{ref:Se,className:`hidden lg:flex flex-shrink-0 bg-bambu-dark-secondary rounded-lg border border-bambu-dark-tertiary overflow-hidden flex-col relative`,style:{width:`${ve}px`},children:[(0,G.jsx)(`div`,{className:`absolute right-0 top-0 bottom-0 w-1.5 cursor-col-resize z-10 group/resize flex items-center justify-center transition-colors ${be?`bg-bambu-green`:`hover:bg-bambu-green/50`}`,onMouseDown:e=>{e.preventDefault(),xe(!0)},onDoubleClick:()=>{ye(256),localStorage.setItem(`library-sidebar-width`,`256`)},title:e(`fileManager.dragToResizeTooltip`),children:(0,G.jsxs)(`div`,{className:`flex flex-col gap-1 opacity-0 group-hover/resize:opacity-100 transition-opacity ${be?`opacity-100`:``}`,children:[(0,G.jsx)(`div`,{className:`w-0.5 h-0.5 rounded-full bg-white/70`}),(0,G.jsx)(`div`,{className:`w-0.5 h-0.5 rounded-full bg-white/70`}),(0,G.jsx)(`div`,{className:`w-0.5 h-0.5 rounded-full bg-white/70`})]})}),(0,G.jsxs)(`div`,{className:`p-3 border-b border-bambu-dark-tertiary flex items-center justify-between`,children:[(0,G.jsx)(`h2`,{className:`text-sm font-medium text-white`,children:e(`fileManager.folders`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsxs)(`select`,{value:me,onChange:e=>{let t=e.target.value===`activity`?`activity`:`name`;he(t),localStorage.setItem(`library-folder-sort-field`,t)},className:`text-xs px-1 py-0.5 rounded bg-bambu-dark border border-bambu-dark-tertiary text-bambu-gray focus:outline-none focus:border-bambu-green`,title:e(`fileManager.folderSort`),"aria-label":e(`fileManager.folderSort`),children:[(0,G.jsx)(`option`,{value:`name`,children:e(`fileManager.folderSortByName`)}),(0,G.jsx)(`option`,{value:`activity`,children:e(`fileManager.folderSortByActivity`)})]}),(0,G.jsx)(`button`,{onClick:()=>{let e=ge===`asc`?`desc`:`asc`;_e(e),localStorage.setItem(`library-folder-sort-direction`,e)},className:`text-bambu-gray hover:text-white hover:bg-bambu-dark p-1 rounded transition-colors`,title:e(ge===`asc`?`fileManager.ascending`:`fileManager.descending`),"aria-label":e(ge===`asc`?`fileManager.ascending`:`fileManager.descending`),children:ge===`asc`?(0,G.jsx)(Vo,{className:`w-3.5 h-3.5`}):(0,G.jsx)(Fo,{className:`w-3.5 h-3.5`})}),(0,G.jsx)(`button`,{onClick:()=>{let e=!fe;pe(e),localStorage.setItem(`library-collapse-folders`,String(e))},className:`text-xs px-1.5 py-0.5 rounded transition-colors ${fe?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:text-white hover:bg-bambu-dark`}`,title:e(fe?`fileManager.expandFoldersByDefault`:`fileManager.collapseFoldersByDefault`),children:e(`fileManager.collapse`)}),(0,G.jsx)(`button`,{onClick:()=>{let e=!ue;de(e),localStorage.setItem(`library-wrap-folders`,String(e))},className:`text-xs px-1.5 py-0.5 rounded transition-colors ${ue?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:text-white hover:bg-bambu-dark`}`,title:e(ue?`fileManager.disableTextWrapping`:`fileManager.enableTextWrapping`),children:e(`fileManager.wrap`)})]})]}),(0,G.jsxs)(`div`,{className:`flex-1 overflow-y-auto p-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 px-2 py-1.5 rounded cursor-pointer transition-colors ${u===null&&f===`internal`?`bg-bambu-green/20 text-bambu-green`:`hover:bg-bambu-dark text-white`}`,onClick:()=>{d(null),p(`internal`)},children:[(0,G.jsx)(oc,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-sm`,children:e(`fileManager.allFiles`)})]}),ze?.some(e=>e.is_external)&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 px-2 py-1.5 rounded cursor-pointer transition-colors ${u===null&&f===`external`?`bg-bambu-green/20 text-bambu-green`:`hover:bg-bambu-dark text-white`}`,onClick:()=>{d(null),p(`external`)},children:[(0,G.jsx)(yc,{className:`w-4 h-4 text-purple-600 dark:text-purple-400`}),(0,G.jsx)(`span`,{className:`text-sm`,children:e(`fileManager.allExternal`)})]}),Ve?.map(t=>(0,G.jsx)(_$e,{folder:t,selectedFolderId:u,onSelect:d,onDelete:e=>R({type:`folder`,id:e}),onLink:I,onRename:e=>ie({type:`folder`,id:e.id,name:e.name}),wrapNames:ue,defaultExpanded:!fe,showModified:Ne,hasPermission:r,t:e},`${t.id}-${fe?`c`:`e`}`))]})]}),(0,G.jsxs)(`div`,{className:`flex-1 flex flex-col lg:flex-row min-w-0 min-h-0 gap-4 lg:gap-6`,children:[(0,G.jsxs)(`div`,{className:`flex-1 flex flex-col min-w-0 min-h-0`,children:[Ge.length>0&&(0,G.jsxs)(`div`,{className:`mb-3 flex flex-wrap items-center gap-2 p-2 sm:p-3 bg-bambu-dark-secondary rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray font-medium shrink-0`,children:e(`fileManager.tags.filterLabel`)}),Ge.map(e=>{let t=N.includes(e.id);return(0,G.jsxs)(`button`,{type:`button`,onClick:()=>qe(e.id),className:t?`inline-flex items-center gap-1 px-2 py-0.5 rounded-full text-xs bg-bambu-green/20 text-bambu-green border border-bambu-green/40 hover:bg-bambu-green/30 transition-colors`:`inline-flex items-center gap-1 px-2 py-0.5 rounded-full text-xs bg-bambu-dark text-bambu-gray border border-bambu-dark-tertiary hover:text-white hover:border-bambu-green/40 transition-colors`,title:e.name,children:[(0,G.jsx)(Tu,{className:`w-3 h-3`}),(0,G.jsx)(`span`,{children:e.name}),t&&(0,G.jsx)(td,{className:`w-3 h-3`})]},e.id)}),N.length>0&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>P([]),className:`ml-auto text-xs text-bambu-gray hover:text-white shrink-0`,children:e(`fileManager.tags.clearAll`)})]}),Ot?.is_external&&(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mb-4 p-3 bg-purple-50 dark:bg-purple-500/10 border border-purple-300 dark:border-purple-500/30 rounded-lg`,children:[(0,G.jsx)(yc,{className:`w-5 h-5 text-purple-600 dark:text-purple-400 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-sm font-medium text-purple-700 dark:text-purple-300`,children:e(`fileManager.externalFolder`)}),Ot.external_readonly&&(0,G.jsxs)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400 flex items-center gap-1`,children:[(0,G.jsx)(tl,{className:`w-3 h-3`}),e(`fileManager.readOnly`)]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray truncate font-mono`,title:Ot.external_path||``,children:Ot.external_path})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>u&&rt.mutate(u),disabled:rt.isPending,title:e(`fileManager.scanFolder`),children:[rt.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Vl,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`ml-1.5`,children:e(`fileManager.scanFolder`)})]})]}),Je&&Je.length>0&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 sm:gap-3 mb-4 p-2 sm:p-3 bg-bambu-dark-secondary rounded-lg border border-bambu-dark-tertiary sticky top-0 z-10 lg:static`,children:[(0,G.jsxs)(`div`,{className:`relative w-full sm:w-auto sm:flex-1 sm:max-w-xs`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,placeholder:e(`fileManager.searchFiles`),value:Ce,onChange:e=>we(e.target.value),className:`w-full pl-9 pr-3 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`}),Ue&&(0,G.jsx)(`span`,{className:`absolute -bottom-4 left-0 text-[10px] text-bambu-gray whitespace-nowrap`,title:e(`fileManager.searchSubfoldersHint`),children:e(`fileManager.searchSubfoldersHint`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Cc,{className:`w-4 h-4 text-bambu-gray hidden sm:block`}),(0,G.jsxs)(`select`,{value:Te,onChange:e=>Ee(e.target.value),className:`bg-bambu-dark border border-bambu-dark-tertiary rounded px-2 py-1.5 text-sm text-white focus:outline-none focus:border-bambu-green`,children:[(0,G.jsx)(`option`,{value:`all`,children:e(`fileManager.allTypes`)}),Qe.map(e=>(0,G.jsx)(`option`,{value:e,children:e.toUpperCase()},e))]})]}),o&&(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`input`,{type:`text`,placeholder:e(`fileManager.filterByUser`,{defaultValue:`Filter by user`}),value:De,onChange:e=>Oe(e.target.value),list:`usernames-list`,className:`w-32 sm:w-40 px-2 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green ${De?`pr-7`:``}`,style:De?{WebkitAppearance:`none`,MozAppearance:`textfield`}:void 0}),De&&(0,G.jsx)(`button`,{onClick:()=>Oe(``),className:`absolute right-2 top-1/2 -translate-y-1/2 text-bambu-gray hover:text-white z-10`,children:(0,G.jsx)(td,{className:`w-3 h-3`})}),(0,G.jsx)(`datalist`,{id:`usernames-list`,children:Ze?.map(e=>(0,G.jsx)(`option`,{value:e.username},e.id))})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`select`,{value:ke,onChange:e=>{let t=e.target.value;Ae(t),localStorage.setItem(`library-sort-field`,t)},className:`bg-bambu-dark border border-bambu-dark-tertiary rounded px-2 py-1.5 text-sm text-white focus:outline-none focus:border-bambu-green`,children:[(0,G.jsx)(`option`,{value:`name`,children:e(`common.name`)}),(0,G.jsx)(`option`,{value:`date`,children:e(`common.date`)}),(0,G.jsx)(`option`,{value:`size`,children:e(`fileManager.size`)}),(0,G.jsx)(`option`,{value:`type`,children:e(`common.type`)}),(0,G.jsx)(`option`,{value:`prints`,children:e(`fileManager.prints`)})]}),(0,G.jsx)(`button`,{onClick:()=>Me(e=>{let t=e===`asc`?`desc`:`asc`;return localStorage.setItem(`library-sort-direction`,t),t}),className:`p-1.5 rounded bg-bambu-dark border border-bambu-dark-tertiary hover:border-bambu-green transition-colors`,title:e(je===`asc`?`fileManager.ascending`:`fileManager.descending`),children:je===`asc`?(0,G.jsx)(Vo,{className:`w-4 h-4 text-white`}):(0,G.jsx)(Fo,{className:`w-4 h-4 text-white`})}),(0,G.jsx)(`button`,{onClick:()=>Pe(e=>{let t=!e;return localStorage.setItem(`library-show-modified`,String(t)),t}),className:`p-1.5 rounded bg-bambu-dark border transition-colors ${Ne?`border-bambu-green text-bambu-green`:`border-bambu-dark-tertiary text-white hover:border-bambu-green`}`,title:e(Ne?`fileManager.hideModified`:`fileManager.showModified`),"aria-pressed":Ne,children:(0,G.jsx)(rs,{className:`w-4 h-4`})})]}),(Ce||Te!==`all`||De)&&(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray hidden sm:inline`,children:e(`fileManager.resultsCount`,{showing:$e.length,total:Je.length})})]}),$e.length>0&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 mb-4 p-2 bg-bambu-dark-secondary rounded-lg border border-bambu-dark-tertiary sticky top-[52px] z-10 lg:static`,children:[m.length===$e.length&&m.length>0?(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:yt,children:[(0,G.jsx)(yu,{className:`w-4 h-4 sm:mr-1`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`fileManager.deselectAll`)})]}):(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:vt,children:[(0,G.jsx)(_u,{className:`w-4 h-4 sm:mr-1`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`fileManager.selectAll`)})]}),m.length>0&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray ml-2`,children:e(`fileManager.selected`,{count:m.length})}),(0,G.jsx)(`div`,{className:`hidden sm:block flex-1`}),(0,G.jsxs)(`div`,{className:`w-full sm:w-auto flex flex-wrap items-center gap-2 mt-2 sm:mt-0`,children:[mt.length>=1&&(0,G.jsxs)(Q,{variant:`primary`,size:`sm`,onClick:()=>B(mt[0]),disabled:!r(`queue:create`),title:r(`queue:create`)?void 0:e(`fileManager.noPermissionAddToQueue`),children:[(0,G.jsx)(Ll,{className:`w-4 h-4 sm:mr-1`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:mt.length>1?e(`fileManager.variants.printAlternatives`,{count:mt.length}):e(`common.print`)})]}),mt.length>=2&&!mt.some(e=>e.variant_group_id)&&(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>ot.mutate(mt.map(e=>e.id)),disabled:ot.isPending||!i(`library:update_own`,`library:update_all`),title:e(`fileManager.variants.groupTooltip`),children:[(0,G.jsx)(qc,{className:`w-4 h-4 sm:mr-1`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`fileManager.variants.groupAction`)})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>S(!0),disabled:!i(`library:update_own`,`library:update_all`),title:i(`library:update_own`,`library:update_all`)?void 0:e(`fileManager.noPermissionMoveFiles`),children:[(0,G.jsx)(_l,{className:`w-4 h-4 sm:mr-1`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.move`)})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>M(!0),disabled:!i(`library:update_own`,`library:update_all`),title:i(`library:update_own`,`library:update_all`)?e(`fileManager.tags.bulkTooltip`):e(`fileManager.tags.noPermission`),children:[(0,G.jsx)(Tu,{className:`w-4 h-4 sm:mr-1`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`fileManager.tags.tagAction`)})]}),(0,G.jsxs)(Q,{variant:`danger`,size:`sm`,onClick:()=>{m.length===1?R({type:`file`,id:m[0]}):R({type:`bulk`,id:0,count:m.length})},disabled:!i(`library:delete_own`,`library:delete_all`),title:i(`library:delete_own`,`library:delete_all`)?void 0:e(`fileManager.noPermissionDeleteFiles`),children:[(0,G.jsx)(Nu,{className:`w-4 h-4 sm:mr-1`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.delete`)})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:yt,children:[(0,G.jsx)(td,{className:`w-4 h-4 sm:mr-1`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.clear`)})]})]})]})]}),Dt?(0,G.jsx)(`div`,{className:`flex-1 flex items-center justify-center`,children:(0,G.jsxs)(`div`,{className:`flex flex-col items-center gap-3`,children:[(0,G.jsx)(Y,{className:`w-8 h-8 animate-spin text-bambu-green`}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`fileManager.loadingFiles`)})]})}):Je?.length===0?(0,G.jsxs)(`div`,{className:`flex-1 flex flex-col items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`p-4 bg-bambu-dark rounded-2xl mb-4`,children:(0,G.jsx)(oc,{className:`w-12 h-12 text-bambu-gray/50`})}),(0,G.jsx)(`h3`,{className:`text-lg font-medium text-white mb-2`,children:e(u===null?f===`external`?`fileManager.externalIsEmpty`:`fileManager.noFilesYet`:`fileManager.folderIsEmpty`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-center max-w-md mb-6`,children:e(u===null?f===`external`?`fileManager.externalEmptyDescription`:`fileManager.noFilesDescription`:`fileManager.folderEmptyDescription`)}),(0,G.jsxs)(Q,{onClick:()=>w(!0),disabled:!r(`library:upload`),title:r(`library:upload`)?void 0:e(`fileManager.noPermissionUpload`),children:[(0,G.jsx)(Pl,{className:`w-4 h-4 mr-2`}),e(`fileManager.uploadFiles`)]})]}):$e.length===0?(0,G.jsxs)(`div`,{className:`flex-1 flex flex-col items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`p-4 bg-bambu-dark rounded-2xl mb-4`,children:(0,G.jsx)(Zl,{className:`w-12 h-12 text-bambu-gray/50`})}),(0,G.jsx)(`h3`,{className:`text-lg font-medium text-white mb-2`,children:e(`fileManager.noMatchingFiles`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-center max-w-md mb-6`,children:e(`fileManager.noMatchingFilesDescription`)}),(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{we(``),Ee(`all`)},children:e(`fileManager.clearFilters`)})]}):ce===`grid`?(0,G.jsx)(`div`,{className:`flex-1 lg:overflow-y-auto`,children:(0,G.jsx)(`div`,{className:`grid grid-cols-2 sm:grid-cols-3 lg:grid-cols-4 xl:grid-cols-5 2xl:grid-cols-6 gap-4`,children:$e.map(t=>(0,G.jsx)(v$e,{file:t,isSelected:m.includes(t.id),t:e,onSelect:_t,onDelete:e=>R({type:`file`,id:e}),onDownload:Ct,onPrint:B,onSlice:ee,onOpenInSlicer:Le,desktopSlicer:Ie,onRunPipeline:ne,useSlicerApi:Fe?.use_slicer_api??!1,canSlice:Re(),onPreview3d:e=>{F5(e)?c(`/gcode-viewer?library_file=${e.id}`):H(e)},onRename:e=>ie({type:`file`,id:e.id,name:e.filename}),onGenerateThumbnail:e=>pt.mutate(e.id),onTagClick:qe,thumbnailVersion:ae[t.id],hasPermission:r,canModify:a,authEnabled:o,showModified:Ne},t.id))})}):(0,G.jsx)(`div`,{className:`flex-1 lg:overflow-y-auto`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg border border-bambu-dark-tertiary overflow-x-auto`,children:[(0,G.jsxs)(`div`,{className:`hidden sm:grid ${o?`grid-cols-[auto_1fr_120px_100px_100px_100px_minmax(0,200px)_220px]`:`grid-cols-[auto_1fr_100px_100px_100px_minmax(0,200px)_220px]`} gap-4 px-4 py-2 bg-bambu-dark-secondary border-b border-bambu-dark-tertiary text-xs text-bambu-gray font-medium`,children:[(0,G.jsx)(`div`,{className:`w-6`}),(0,G.jsx)(`div`,{children:e(`common.name`)}),o&&(0,G.jsx)(`div`,{children:e(`fileManager.uploadedBy`,{defaultValue:`Uploaded By`})}),(0,G.jsx)(`div`,{children:e(`common.type`)}),(0,G.jsx)(`div`,{children:e(`fileManager.size`)}),(0,G.jsx)(`div`,{children:e(`fileManager.prints`)}),(0,G.jsx)(`div`,{children:e(`fileManager.tags.title`)}),(0,G.jsx)(`div`,{})]}),$e.map(t=>(0,G.jsxs)(`div`,{className:`grid ${o?`grid-cols-[auto_1fr_120px_100px_100px_100px_minmax(0,200px)_220px]`:`grid-cols-[auto_1fr_100px_100px_100px_minmax(0,200px)_220px]`} gap-4 px-4 py-3 items-center border-b border-bambu-dark-tertiary last:border-b-0 cursor-pointer hover:bg-bambu-dark/50 transition-colors ${m.includes(t.id)?`bg-bambu-green/10`:``}`,onClick:()=>_t(t.id),children:[(0,G.jsx)(`div`,{className:`w-5 h-5 rounded border-2 flex items-center justify-center ${m.includes(t.id)?`bg-bambu-green border-bambu-green`:`border-bambu-gray/50`}`,children:m.includes(t.id)&&(0,G.jsx)(`div`,{className:`w-2 h-2 bg-white rounded-sm`})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`relative group/thumb`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded bg-bambu-dark flex-shrink-0 overflow-hidden`,children:t.thumbnail_path?(0,G.jsx)(`img`,{src:`${Z.getLibraryFileThumbnailUrl(t.id)}${ae[t.id]?(Z.getLibraryFileThumbnailUrl(t.id).includes(`?`)?`&`:`?`)+`v=${ae[t.id]}`:``}`,alt:``,className:`w-full h-full object-cover`}):(0,G.jsx)(`div`,{className:`w-full h-full flex items-center justify-center`,children:(0,G.jsx)(oc,{className:`w-5 h-5 text-bambu-gray/50`})})}),t.thumbnail_path&&(0,G.jsx)(`div`,{className:`absolute left-0 top-full mt-2 z-50 hidden group-hover/thumb:block`,children:(0,G.jsx)(`div`,{className:`w-48 h-48 rounded-lg bg-bambu-dark-secondary border border-bambu-dark-tertiary shadow-xl overflow-hidden`,children:(0,G.jsx)(`img`,{src:`${Z.getLibraryFileThumbnailUrl(t.id)}${ae[t.id]?(Z.getLibraryFileThumbnailUrl(t.id).includes(`?`)?`&`:`?`)+`v=${ae[t.id]}`:``}`,alt:t.filename,className:`w-full h-full object-contain`})})})]}),(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-sm text-white truncate`,children:t.print_name||t.filename}),Ne&&(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray flex items-center gap-1 mt-0.5`,title:e(`fileManager.lastModified`),children:[(0,G.jsx)(rs,{className:`w-3 h-3 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,children:tp(t.fs_modified_at??t.created_at)})]})]})]}),o&&(0,G.jsx)(`div`,{className:`text-sm text-bambu-gray flex items-center gap-1`,children:t.created_by_username?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Vu,{className:`w-3 h-3`}),(0,G.jsx)(`span`,{className:`truncate`,children:t.created_by_username})]}):`-`}),(0,G.jsx)(`div`,{children:(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded font-medium ${t.file_type===`3mf`?`bg-bambu-green/20 text-bambu-green`:t.file_type===`gcode`||t.file_type===`gcode.3mf`?`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`:t.file_type===`stl`?`bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-400`:`bg-bambu-gray/20 text-bambu-gray`}`,children:t.file_type.toUpperCase()})}),(0,G.jsx)(`div`,{className:`text-sm text-bambu-gray`,children:Ud(t.file_size)}),(0,G.jsx)(`div`,{className:`text-sm text-bambu-gray`,children:t.print_count>0?`${t.print_count}x`:`-`}),(0,G.jsx)(`div`,{className:`min-w-0`,onClick:e=>e.stopPropagation(),children:!t.tags||t.tags.length===0?(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray/50`,children:`-`}):(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1`,children:t.tags.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>qe(e.id),className:`inline-flex items-center gap-0.5 px-1.5 py-0.5 rounded-full text-[10px] bg-bambu-green/10 text-bambu-green hover:bg-bambu-green/20 transition-colors max-w-full`,title:e.name,children:[(0,G.jsx)(Tu,{className:`w-2.5 h-2.5 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,children:e.name})]},e.id))})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,onClick:e=>e.stopPropagation(),children:[F5(t)&&(0,G.jsx)(G.Fragment,{children:(0,G.jsx)(`button`,{onClick:()=>r(`queue:create`)&&B(t),className:`p-1.5 rounded transition-colors ${r(`queue:create`)?`hover:bg-bambu-dark text-bambu-gray hover:text-bambu-green`:`text-bambu-gray/50 cursor-not-allowed`}`,title:r(`queue:create`)?e(`common.print`):e(`fileManager.noPermissionAddToQueue`),disabled:!r(`queue:create`),children:(0,G.jsx)(Ll,{className:`w-4 h-4`})})}),I5(t,!!Fe?.use_slicer_api,Ie)&&(0,G.jsx)(`button`,{onClick:()=>{Re()&&(Fe?.use_slicer_api?ee:Le)(t)},className:`p-1.5 rounded transition-colors ${Re()?`hover:bg-bambu-dark text-bambu-gray hover:text-bambu-green`:`text-bambu-gray/50 cursor-not-allowed`}`,title:Re()?e(`slice.action`):Fe?.use_slicer_api?e(`fileManager.noPermissionSlice`):e(`fileManager.noPermissionDownload`),disabled:!Re(),children:Fe?.use_slicer_api?(0,G.jsx)(Rs,{className:`w-4 h-4`}):(0,G.jsx)(nc,{className:`w-4 h-4`})}),(Fe?.use_slicer_api??!1)&&I5(t,!0,Ie)&&(0,G.jsx)(`button`,{onClick:()=>r(`pipelines:run`)&&ne(t),className:`p-1.5 rounded transition-colors ${r(`pipelines:run`)?`hover:bg-bambu-dark text-bambu-gray hover:text-bambu-green`:`text-bambu-gray/50 cursor-not-allowed`}`,title:r(`pipelines:run`)?e(`library.runWithPipeline.actionLabel`,`Run with pipeline`):e(`library.runWithPipeline.noPermission`,`You do not have permission to run pipelines`),disabled:!r(`pipelines:run`),children:(0,G.jsx)(Ml,{className:`w-4 h-4`})}),(t.file_type===`3mf`||t.file_type===`gcode`||t.file_type===`gcode.3mf`||t.file_type===`stl`)&&(0,G.jsx)(`button`,{onClick:()=>{r(`library:read`)&&(F5(t)?c(`/gcode-viewer?library_file=${t.id}`):H(t))},className:`p-1.5 rounded transition-colors ${r(`library:read`)?`hover:bg-bambu-dark text-bambu-gray hover:text-bambu-green`:`text-bambu-gray/50 cursor-not-allowed`}`,title:r(`library:read`)?`3D Preview`:`You do not have permission to preview files`,disabled:!r(`library:read`),children:(0,G.jsx)(Zo,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>r(`library:read`)&&Ct(t.id),className:`p-1.5 rounded transition-colors ${r(`library:read`)?`hover:bg-bambu-dark text-bambu-gray hover:text-white`:`text-bambu-gray/50 cursor-not-allowed`}`,title:r(`library:read`)?e(`common.download`):e(`fileManager.noPermissionDownload`),disabled:!r(`library:read`),children:(0,G.jsx)(Ys,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>a(`library`,`update`,t.created_by_id)&&ie({type:`file`,id:t.id,name:t.filename}),className:`p-1.5 rounded transition-colors ${a(`library`,`update`,t.created_by_id)?`hover:bg-bambu-dark text-bambu-gray hover:text-white`:`text-bambu-gray/50 cursor-not-allowed`}`,title:a(`library`,`update`,t.created_by_id)?e(`common.rename`):e(`fileManager.noPermissionRenameFile`),disabled:!a(`library`,`update`,t.created_by_id),children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),t.file_type===`stl`&&(0,G.jsx)(`button`,{onClick:()=>a(`library`,`update`,t.created_by_id)&&pt.mutate(t.id),className:`p-1.5 rounded transition-colors ${a(`library`,`update`,t.created_by_id)?`hover:bg-bambu-dark text-bambu-gray hover:text-bambu-green`:`text-bambu-gray/50 cursor-not-allowed`}`,title:a(`library`,`update`,t.created_by_id)?e(`fileManager.generateThumbnail`):e(`fileManager.noPermissionGenerateThumbnail`),disabled:pt.isPending||!a(`library`,`update`,t.created_by_id),children:(0,G.jsx)(Vc,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>a(`library`,`delete`,t.created_by_id)&&R({type:`file`,id:t.id}),className:`p-1.5 rounded transition-colors ${a(`library`,`delete`,t.created_by_id)?`hover:bg-bambu-dark text-bambu-gray hover:text-red-700 dark:hover:text-red-400`:`text-bambu-gray/50 cursor-not-allowed`}`,title:a(`library`,`delete`,t.created_by_id)?e(`common.delete`):e(`fileManager.noPermissionDeleteFile`),disabled:!a(`library`,`delete`,t.created_by_id),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})]},t.id))]})})]}),u!==null&&(0,G.jsx)(o$e,{folderId:u})]})]}),g&&(0,G.jsx)(u$e,{parentId:u,onClose:()=>_(!1),onSave:e=>tt.mutate(e),isLoading:tt.isPending,t:e}),v&&(0,G.jsx)(d$e,{onClose:()=>b(!1),onSave:e=>nt.mutate(e),isLoading:nt.isPending,t:e}),x&&ze&&(0,G.jsx)(h$e,{folders:ze,selectedFiles:m,currentFolderId:u,onClose:()=>S(!1),onMove:e=>ct.mutate({fileIds:m,folderId:e}),isLoading:ct.isPending,t:e}),C&&(0,G.jsx)(yW,{folderId:u,onClose:()=>{w(!1),E([])},onUploadComplete:bt,initialFiles:T.length>0?T:void 0}),D&&(0,G.jsx)(l$e,{onClose:()=>O(!1)}),(0,G.jsx)(s$e,{open:k,onClose:()=>A(!1),onPickTag:e=>{N.includes(e)||P(t=>[...t,e])}}),(0,G.jsx)(zKe,{open:j,fileIds:m,onClose:()=>M(!1)}),F&&(0,G.jsx)(g$e,{folder:F,onClose:()=>I(null),onLink:e=>lt.mutate({id:F.id,data:e}),isLoading:lt.isPending,t:e}),L&&(0,G.jsx)(rf,{title:L.type===`folder`?e(`fileManager.deleteFolder`):L.type===`bulk`?e(`fileManager.deleteFilesCount`,{count:L.count}):e(`fileManager.deleteFile`),message:L.type===`folder`?e(`fileManager.deleteFolderConfirm`):L.type===`bulk`?e(`fileManager.deleteFilesConfirm`,{count:L.count}):e(`fileManager.deleteFileConfirm`),confirmText:e(`common.delete`),variant:`danger`,isLoading:Tt,loadingText:e(`fileManager.deleting`),onConfirm:wt,onCancel:()=>R(null)}),z&&(!z.variant_group_id||ht!==void 0)&&(0,G.jsx)(WW,{mode:`create`,libraryFileId:gt?.[0]?.id??z.id,variantFiles:gt,archiveName:gt&&gt.length>1?`${gt[0].filename} ${e(`common.plusNMore`,{count:gt.length-1})}`:z.print_name||z.filename,onClose:()=>B(null),onSuccess:()=>{B(null),h([]),t.invalidateQueries({queryKey:[`library-files`]}),t.invalidateQueries({queryKey:[`queue`]}),t.invalidateQueries({queryKey:[`archives`]})}}),V&&(0,G.jsx)(UG,{source:{kind:`libraryFile`,id:V.id,filename:V.filename},onClose:()=>ee(null)}),te&&(0,G.jsx)(KG,{source:{kind:`libraryFile`,id:te.id,filename:te.filename},onClose:()=>ne(null)}),se&&(0,G.jsx)(RKe,{libraryFileId:se.id,title:se.print_name||se.filename,fileType:se.file_type,onClose:()=>H(null),onSliceWithBambuddy:I5(se,!0,Ie)&&r(`library:upload`)?()=>{let e=se;H(null),ee(e)}:void 0}),re&&(0,G.jsx)(m$e,{type:re.type,currentName:re.name,onClose:()=>ie(null),onSave:e=>{re.type===`file`?ut.mutate({id:re.id,filename:e}):dt.mutate({id:re.id,name:e})},isLoading:ut.isPending||dt.isPending,t:e})]})}function b$e(e){let t=ep(e);if(!t)return``;let n=Math.ceil((t.getTime()-Date.now())/(1e3*60*60*24));return n<=0?`any moment`:n===1?`1 day`:`${n} days`}function x$e(e){let t=ep(e);return t?t.toLocaleString():e}function S$e(){let{t:e}=U(),t=or(),n=co(),{showToast:r}=Gd(),{hasPermission:i,authEnabled:a}=jd(),[o,s]=(0,y.useState)(null),[c,l]=(0,y.useState)(new Set),u=!a||i(`library:purge`),d=K({queryKey:[`library-trash`],queryFn:()=>Z.listLibraryTrash(200,0)}),f=K({queryKey:[`library-trash-settings`],queryFn:()=>Z.getLibraryTrashSettings(),enabled:u}),[p,m]=(0,y.useState)(null);(0,y.useEffect)(()=>{f.data&&p===null&&m(f.data.retention_days)},[f.data,p]);let h=q({mutationFn:e=>{let t=f.data;return Z.updateLibraryTrashSettings({retention_days:e,auto_purge_enabled:t?.auto_purge_enabled??!1,auto_purge_days:t?.auto_purge_days??90,auto_purge_include_never_printed:t?.auto_purge_include_never_printed??!0})},onSuccess:t=>{r(e(`libraryTrash.toast.retentionSaved`,{days:t.retention_days}),`success`),n.invalidateQueries({queryKey:[`library-trash-settings`]}),n.invalidateQueries({queryKey:[`library-trash`]})},onError:t=>r(t.message||e(`libraryTrash.toast.retentionFailed`),`error`)}),g=q({mutationFn:e=>Z.restoreLibraryTrash(e),onSuccess:()=>{r(e(`libraryTrash.toast.restored`),`success`),n.invalidateQueries({queryKey:[`library-trash`]}),n.invalidateQueries({queryKey:[`library-trash-count`]}),n.invalidateQueries({queryKey:[`library-files`]}),n.invalidateQueries({queryKey:[`library-folders`]})},onError:t=>r(t.message||e(`libraryTrash.toast.restoreFailed`),`error`)}),_=q({mutationFn:e=>Z.hardDeleteLibraryTrash(e),onSuccess:()=>{r(e(`libraryTrash.toast.purged`),`success`),n.invalidateQueries({queryKey:[`library-trash`]}),n.invalidateQueries({queryKey:[`library-trash-count`]})},onError:t=>r(t.message||e(`libraryTrash.toast.purgeFailed`),`error`)}),v=q({mutationFn:()=>Z.emptyLibraryTrash(),onSuccess:t=>{r(e(`libraryTrash.toast.emptied`,{count:t.deleted}),`success`),n.invalidateQueries({queryKey:[`library-trash`]}),n.invalidateQueries({queryKey:[`library-trash-count`]})},onError:t=>r(t.message||e(`libraryTrash.toast.emptyFailed`),`error`)}),b=q({mutationFn:e=>Promise.all(e.map(e=>Z.restoreLibraryTrash(e))),onSuccess:(t,i)=>{r(e(`libraryTrash.toast.bulkRestored`,{count:i.length}),`success`),l(new Set),n.invalidateQueries({queryKey:[`library-trash`]}),n.invalidateQueries({queryKey:[`library-trash-count`]}),n.invalidateQueries({queryKey:[`library-files`]}),n.invalidateQueries({queryKey:[`library-folders`]})},onError:t=>r(t.message||e(`libraryTrash.toast.restoreFailed`),`error`)}),x=q({mutationFn:e=>Promise.all(e.map(e=>Z.hardDeleteLibraryTrash(e))),onSuccess:(t,i)=>{r(e(`libraryTrash.toast.bulkPurged`,{count:i.length}),`success`),l(new Set),n.invalidateQueries({queryKey:[`library-trash`]}),n.invalidateQueries({queryKey:[`library-trash-count`]})},onError:t=>r(t.message||e(`libraryTrash.toast.purgeFailed`),`error`)}),S=(0,y.useMemo)(()=>d.data?.items??[],[d.data?.items]),C=d.data?.retention_days??30,w=(0,y.useMemo)(()=>S.reduce((e,t)=>e+t.file_size,0),[S]),T=S.length>0&&S.every(e=>c.has(e.id)),E=c.size>0&&!T,D=e=>{l(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})};return(0,G.jsxs)(`div`,{className:`p-6 max-w-screen-2xl mx-auto`,children:[(0,G.jsx)(`div`,{className:`flex items-center gap-3 mb-4`,children:(0,G.jsxs)(Ai,{to:`/files`,className:`inline-flex items-center gap-1 text-sm text-gray-600 dark:text-gray-400 hover:text-gray-900 dark:hover:text-gray-200`,children:[(0,G.jsx)(Lo,{className:`w-4 h-4`}),` `,e(`libraryTrash.backToFiles`)]})}),(0,G.jsxs)(`div`,{className:`flex items-start justify-between mb-6 gap-4 flex-wrap`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h1`,{className:`text-2xl font-bold text-gray-900 dark:text-gray-100`,children:e(`libraryTrash.title`)}),(0,G.jsx)(`p`,{className:`text-sm text-gray-600 dark:text-gray-400 mt-1`,children:e(u?`libraryTrash.subtitleAdmin`:`libraryTrash.subtitleUser`,{days:C})})]}),S.length>0&&(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>s({type:`empty`}),className:`text-red-600 dark:text-red-400`,children:[(0,G.jsx)(Nu,{className:`w-4 h-4 mr-1`}),e(`libraryTrash.emptyTrash`)]})]}),u&&f.data&&(0,G.jsxs)(`div`,{className:`mb-4 border border-gray-200 dark:border-gray-700 rounded-lg p-3 flex items-center gap-3 bg-gray-50 dark:bg-gray-800/40`,children:[(0,G.jsx)(`label`,{htmlFor:`retention-days`,className:`text-sm font-medium text-gray-700 dark:text-gray-300`,children:e(`libraryTrash.retentionLabel`)}),(0,G.jsx)(`input`,{id:`retention-days`,type:`number`,min:1,max:365,value:p??f.data.retention_days,onChange:e=>m(Math.max(1,Math.min(365,parseInt(e.target.value||`0`,10)||0))),className:`w-20 rounded border border-gray-300 dark:border-gray-600 bg-white dark:bg-gray-800 text-sm px-2 py-1 text-gray-900 dark:text-gray-100`}),(0,G.jsx)(`span`,{className:`text-sm text-gray-600 dark:text-gray-400`,children:e(`libraryTrash.days`)}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>p!=null&&h.mutate(p),disabled:h.isPending||p==null||p===f.data.retention_days,className:`ml-auto`,children:[(0,G.jsx)(Kl,{className:`w-4 h-4 mr-1`}),e(`common.save`)]})]}),d.isLoading?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-gray-500 dark:text-gray-400`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),` `,e(`libraryTrash.loading`)]}):S.length===0?(0,G.jsx)(`div`,{className:`border border-dashed border-gray-300 dark:border-gray-700 rounded-lg p-12 text-center`,children:(0,G.jsx)(`p`,{className:`text-gray-500 dark:text-gray-400`,children:e(`libraryTrash.empty`)})}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`div`,{className:`text-xs text-gray-500 dark:text-gray-400`,children:e(`libraryTrash.summary`,{count:S.length,size:Ud(w)})}),c.size>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(`span`,{className:`text-gray-600 dark:text-gray-400`,children:e(`libraryTrash.selectionCount`,{count:c.size})}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>b.mutate(Array.from(c)),disabled:b.isPending,children:[(0,G.jsx)(Ul,{className:`w-4 h-4 mr-1`}),e(`libraryTrash.bulkRestore`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>s({type:`bulkDelete`,count:c.size}),disabled:x.isPending,className:`text-red-600 dark:text-red-400`,children:[(0,G.jsx)(Nu,{className:`w-4 h-4 mr-1`}),e(`libraryTrash.bulkPurge`)]})]})]}),(0,G.jsx)(`div`,{className:`border border-gray-200 dark:border-gray-700 rounded-lg overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{className:`bg-gray-50 dark:bg-gray-800 text-left text-gray-600 dark:text-gray-300`,children:(0,G.jsxs)(`tr`,{children:[(0,G.jsx)(`th`,{className:`px-3 py-2 w-10`,children:(0,G.jsx)(`input`,{type:`checkbox`,checked:T,ref:e=>{e&&(e.indeterminate=E)},onChange:()=>{l(e=>e.size===S.length?new Set:new Set(S.map(e=>e.id)))},"aria-label":e(`libraryTrash.selectAll`),className:`rounded border-gray-300 cursor-pointer`})}),(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium`,children:e(`libraryTrash.col.filename`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium`,children:e(`libraryTrash.col.folder`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium text-right`,children:e(`libraryTrash.col.size`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium whitespace-nowrap`,children:e(`libraryTrash.col.deleted`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium whitespace-nowrap`,children:e(`libraryTrash.col.autoPurge`)}),u&&(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium`,children:e(`libraryTrash.col.owner`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium text-right`,children:e(`libraryTrash.col.actions`)})]})}),(0,G.jsx)(`tbody`,{className:`divide-y divide-gray-100 dark:divide-gray-800`,children:S.map(t=>(0,G.jsxs)(`tr`,{className:`hover:bg-gray-50 dark:hover:bg-gray-800/50`,children:[(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsx)(`input`,{type:`checkbox`,checked:c.has(t.id),onChange:()=>D(t.id),"aria-label":e(`libraryTrash.selectOne`,{filename:t.filename}),className:`rounded border-gray-300 cursor-pointer`})}),(0,G.jsx)(`td`,{className:`px-3 py-2 text-gray-900 dark:text-gray-100 truncate max-w-md`,title:t.filename,children:t.filename}),(0,G.jsx)(`td`,{className:`px-3 py-2 text-gray-600 dark:text-gray-400`,children:t.folder_name??`—`}),(0,G.jsx)(`td`,{className:`px-3 py-2 text-right text-gray-600 dark:text-gray-400 tabular-nums whitespace-nowrap`,children:Ud(t.file_size)}),(0,G.jsx)(`td`,{className:`px-3 py-2 text-gray-600 dark:text-gray-400 whitespace-nowrap`,children:x$e(t.deleted_at)}),(0,G.jsx)(`td`,{className:`px-3 py-2 text-gray-600 dark:text-gray-400 whitespace-nowrap`,children:(0,G.jsx)(`span`,{title:x$e(t.auto_purge_at),children:e(`libraryTrash.autoPurgeIn`,{when:b$e(t.auto_purge_at)})})}),u&&(0,G.jsx)(`td`,{className:`px-3 py-2 text-gray-600 dark:text-gray-400`,children:t.created_by_username??`—`}),(0,G.jsxs)(`td`,{className:`px-3 py-2 text-right whitespace-nowrap`,children:[(0,G.jsxs)(`button`,{onClick:()=>g.mutate(t.id),disabled:g.isPending,className:`inline-flex items-center gap-1 px-2 py-1 text-xs text-blue-600 hover:text-blue-800 dark:text-blue-400 dark:hover:text-blue-300`,children:[(0,G.jsx)(Ul,{className:`w-3.5 h-3.5`}),e(`libraryTrash.restore`)]}),(0,G.jsxs)(`button`,{onClick:()=>s({type:`delete`,id:t.id,filename:t.filename}),disabled:_.isPending,className:`inline-flex items-center gap-1 px-2 py-1 text-xs text-red-600 hover:text-red-800 dark:text-red-400 dark:hover:text-red-300 ml-2`,children:[(0,G.jsx)(Nu,{className:`w-3.5 h-3.5`}),e(`libraryTrash.purgeNow`)]})]})]},t.id))})]})})]}),o&&(0,G.jsx)(rf,{onCancel:()=>s(null),onConfirm:()=>{o&&(o.type===`delete`?_.mutate(o.id):o.type===`bulkDelete`?x.mutate(Array.from(c)):v.mutate(),s(null))},title:o.type===`delete`?e(`libraryTrash.confirm.purgeTitle`):o.type===`bulkDelete`?e(`libraryTrash.confirm.bulkPurgeTitle`):e(`libraryTrash.confirm.emptyTitle`),message:o.type===`delete`?e(`libraryTrash.confirm.purgeBody`,{filename:o.filename}):o.type===`bulkDelete`?e(`libraryTrash.confirm.bulkPurgeBody`,{count:o.count}):e(`libraryTrash.confirm.emptyBody`,{count:S.length}),confirmText:e(`libraryTrash.confirm.cta`),variant:`danger`}),d.isError&&(0,G.jsxs)(`div`,{className:`mt-4 text-sm text-red-600 dark:text-red-400`,children:[d.error?.message??e(`libraryTrash.loadError`),(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>t(`/files`),className:`ml-3`,children:e(`libraryTrash.backToFiles`)})]})]})}function C$e(e){return e.includes(`/camera/`)}function w$e(e,t,n){let r=0;return e.querySelectorAll(`img[src*="/api/v1/"], video[src*="/api/v1/"]`).forEach(e=>{let i=e.getAttribute(`src`)||``,a=C$e(i)?n:t;if(!a)return;let o=`token=${encodeURIComponent(a)}`;if(i.includes(o))return;let s=i.replace(/([?&])token=[^&]*(&|$)/,(e,t,n)=>n===`&`?t:``);e.src=`${s}${s.includes(`?`)?`&`:`?`}${o}`,r+=1}),r}function T$e(){let{authEnabled:e,user:t,loading:n,hasPermission:r}=jd(),i=co(),a=(0,y.useRef)(!1),o=!n&&(!e||t!==null),{data:s}=K({queryKey:[`media-token`,t?.id??null],queryFn:()=>Z.getMediaToken(),enabled:o,staleTime:3e3*1e3,refetchInterval:3e3*1e3}),c=!e||r(`camera:view`),{data:l}=K({queryKey:[`camera-stream-token`,t?.id??null],queryFn:()=>Z.getCameraStreamToken(),enabled:o&&c,staleTime:3e3*1e3,refetchInterval:3e3*1e3}),u=s?.token??null,d=l?.token??null;(0,y.useEffect)(()=>(md(u),fd(d),(u||d)&&w$e(document,u,d),()=>{md(null),fd(null)}),[u,d]),(0,y.useEffect)(()=>{if(!e)return;let t=e=>{let t=e.target;if(!(t instanceof HTMLImageElement||t instanceof HTMLVideoElement))return;let n=t.src||``,r=C$e(n),o=r?pd():hd();!o||!n.includes(`token=${encodeURIComponent(o)}`)||a.current||(a.current=!0,i.invalidateQueries({queryKey:r?[`camera-stream-token`]:[`media-token`]}),setTimeout(()=>{a.current=!1},5e3))};return document.addEventListener(`error`,t,!0),()=>document.removeEventListener(`error`,t,!0)},[e,i])}var a9=5,E$e=2e3,D$e=3e4,O$e=5e3;function k$e(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),{hasPermission:r,authEnabled:i,user:a}=jd(),{printerId:o}=dr(),s=parseInt(o||`0`,10),[c]=Ri(),l=parseInt(c.get(`fps`)||`15`,10),u=Math.min(Math.max(isNaN(l)?15:l,1),30);T$e();let{data:d,isPending:f}=K({queryKey:[`camera-stream-token`,a?.id??null],queryFn:()=>Z.getCameraStreamToken(),enabled:i?!!a:!0,staleTime:3e3*1e3}),p=d?.token??pd(),[m,h]=(0,y.useState)(`stream`),[g,_]=(0,y.useState)(!1),[v,b]=(0,y.useState)(!1),[x,S]=(0,y.useState)(!1),[C,w]=(0,y.useState)(!0),[T,E]=(0,y.useState)(Date.now()),[D,O]=(0,y.useState)(!1),[k,A]=(0,y.useState)(!1),[j,M]=(0,y.useState)(0),[N,P]=(0,y.useState)(!1),[F,I]=(0,y.useState)(0),[L,R]=(0,y.useState)(1),[z,B]=(0,y.useState)({x:0,y:0}),[V,ee]=(0,y.useState)(!1),[te,ne]=(0,y.useState)({x:0,y:0}),[re,ie]=(0,y.useState)(null),[ae,oe]=(0,y.useState)(null),se=(0,y.useRef)(null),H=(0,y.useRef)(null),ce=(0,y.useRef)(null),le=(0,y.useRef)(null),ue=(0,y.useRef)(null),de=(0,y.useRef)(0),{data:fe}=K({queryKey:[`printer`,s],queryFn:()=>Z.getPrinter(s),enabled:s>0}),{data:pe}=K({queryKey:[`printerStatus`,s],queryFn:()=>Z.getPrinterStatus(s),refetchInterval:3e4,enabled:s>0}),me=q({mutationFn:e=>Z.setChamberLight(s,e),onMutate:async e=>{await t.cancelQueries({queryKey:[`printerStatus`,s]});let n=t.getQueryData([`printerStatus`,s]);return t.setQueryData([`printerStatus`,s],t=>({...t,chamber_light:e})),{previousStatus:n}},onSuccess:(e,t)=>{n(`Chamber light ${t?`on`:`off`}`)},onError:(r,i,a)=>{a?.previousStatus&&t.setQueryData([`printerStatus`,s],a.previousStatus),n(r.message||e(`printers.toast.failedToControlChamberLight`),`error`)}}),he=(pe?.state===`RUNNING`||pe?.state===`PAUSE`)&&(pe?.printable_objects_count??0)>=2;(0,y.useEffect)(()=>(fe&&(document.title=`${fe.name} - Camera`),()=>{document.title=`Bambuddy`}),[fe]);let ge=(0,y.useRef)(!1);(0,y.useEffect)(()=>{let e=`/api/v1/printers/${s}/camera/stop`;ge.current=!1;let t=()=>{if(s>0&&!ge.current){ge.current=!0;let t={},n=ld();n&&(t.Authorization=`Bearer ${n}`),fetch(e,{method:`POST`,keepalive:!0,headers:t}).catch(()=>{})}},n=()=>{t()};window.addEventListener(`beforeunload`,n);let r=se.current;return()=>{window.removeEventListener(`beforeunload`,n),r&&(r.src=``),t()}},[s]),(0,y.useEffect)(()=>{if(C&&!D){let e=setTimeout(()=>{w(!1)},m===`stream`?3e3:2e4);return()=>clearTimeout(e)}},[m,C,T,D]),(0,y.useEffect)(()=>{let e=()=>{A(!!document.fullscreenElement),R(1),B({x:0,y:0}),m===`stream`&&!D&&(se.current&&(se.current.src=``),setTimeout(()=>{w(!0),E(Date.now())},200))};return document.addEventListener(`fullscreenchange`,e),()=>document.removeEventListener(`fullscreenchange`,e)},[m,D]),(0,y.useEffect)(()=>{let e,t=()=>{clearTimeout(e),e=setTimeout(()=>{localStorage.setItem(`cameraWindowState`,JSON.stringify({width:window.outerWidth,height:window.outerHeight,left:window.screenX,top:window.screenY}))},500)};return window.addEventListener(`resize`,t),()=>{clearTimeout(e),window.removeEventListener(`resize`,t)}},[]),(0,y.useEffect)(()=>()=>{ce.current&&clearTimeout(ce.current),le.current&&clearInterval(le.current),ue.current&&clearInterval(ue.current)},[]);let _e=(0,y.useCallback)(()=>{if(j>=a9){P(!1),S(!0);return}let e=Math.min(E$e*2**j,D$e);P(!0),I(Math.ceil(e/1e3)),le.current=setInterval(()=>{I(e=>e<=1?(le.current&&clearInterval(le.current),0):e-1)},1e3),ce.current=setTimeout(()=>{M(e=>e+1),P(!1),w(!0),S(!1),se.current&&(se.current.src=``),E(Date.now())},e)},[j]);(0,y.useEffect)(()=>{if(m!==`stream`||C||N||D){ue.current&&=(clearInterval(ue.current),null);return}return de.current=0,ue.current=setInterval(async()=>{try{let e=await Z.getCameraStatus(s);if(!(e.stalled||!e.active&&!x)){de.current=0;return}if(de.current+=1,de.current<2)return;de.current=0,console.log(`Stream issue detected: stalled=${e.stalled}, active=${e.active}, reconnecting...`),ue.current&&=(clearInterval(ue.current),null),w(!1),_e()}catch{}},O$e),()=>{ue.current&&=(clearInterval(ue.current),null)}},[m,C,x,N,D,s,_e]);let ve=()=>{w(!1),m===`stream`&&j<a9?_e():S(!0)},ye=()=>{if(w(!1),S(!1),M(0),de.current=0,P(!1),ce.current&&clearTimeout(ce.current),le.current&&clearInterval(le.current),se.current&&!localStorage.getItem(`cameraWindowState`)){let e=se.current,t=e.naturalWidth,n=e.naturalHeight;if(t>0&&n>0){let e=window.outerWidth-window.innerWidth,r=window.outerHeight-window.innerHeight,i=t+16+e,a=n+45+16+r;try{window.resizeTo(i,a)}catch{}}}},be=()=>{if(s>0){let e={},t=ld();t&&(e.Authorization=`Bearer ${t}`),fetch(`/api/v1/printers/${s}/camera/stop`,{method:`POST`,headers:e}).catch(()=>{})}},xe=e=>{m===e||D||(O(!0),w(!0),S(!1),M(0),P(!1),R(1),B({x:0,y:0}),ce.current&&clearTimeout(ce.current),le.current&&clearInterval(le.current),se.current&&(se.current.src=``),m===`stream`&&be(),setTimeout(()=>{h(e),E(Date.now()),O(!1)},100))},Se=()=>{D||(O(!0),w(!0),S(!1),M(0),P(!1),ce.current&&clearTimeout(ce.current),le.current&&clearInterval(le.current),se.current&&(se.current.src=``),m===`stream`&&be(),setTimeout(()=>{E(Date.now()),O(!1)},100))},Ce=()=>{H.current&&(document.fullscreenElement?document.exitFullscreen():H.current.requestFullscreen())},we=()=>{R(e=>Math.min(e+.5,4))},Te=()=>{R(e=>{let t=Math.max(e-.5,1);return t===1&&B({x:0,y:0}),t})},Ee=e=>{e.preventDefault(),e.deltaY<0?we():Te()},De=e=>{L>1&&(e.preventDefault(),ee(!0),ne({x:e.clientX-z.x,y:e.clientY-z.y}))},Oe=(0,y.useCallback)(()=>{if(!H.current)return{x:300,y:200};let e=H.current.getBoundingClientRect(),t=e.width*(L-1)/2,n=e.height*(L-1)/2;return{x:Math.max(50,t),y:Math.max(50,n)}},[L]),ke=e=>{if(V&&L>1){let t=e.clientX-te.x,n=e.clientY-te.y,r=Oe();B({x:Math.max(-r.x,Math.min(r.x,t)),y:Math.max(-r.y,Math.min(r.y,n))})}},Ae=()=>{ee(!1)},je=e=>{if(e.length<2)return 0;let t=e[0].clientX-e[1].clientX,n=e[0].clientY-e[1].clientY;return Math.sqrt(t*t+n*n)},Me=e=>e.length<2?{x:e[0].clientX,y:e[0].clientY}:{x:(e[0].clientX+e[1].clientX)/2,y:(e[0].clientY+e[1].clientY)/2},Ne=e=>{e.touches.length===2?(e.preventDefault(),ie(je(e.touches)),oe(Me(e.touches))):e.touches.length===1&&L>1&&(e.preventDefault(),ee(!0),ne({x:e.touches[0].clientX-z.x,y:e.touches[0].clientY-z.y}))},Pe=e=>{if(e.touches.length===2&&re!==null){e.preventDefault();let t=je(e.touches),n=t/re;R(e=>{let t=Math.max(1,Math.min(4,e*n));return t===1&&B({x:0,y:0}),t}),ie(t);let r=Me(e.touches);if(ae){let e=Oe();B(t=>({x:Math.max(-e.x,Math.min(e.x,t.x+(r.x-ae.x))),y:Math.max(-e.y,Math.min(e.y,t.y+(r.y-ae.y)))}))}oe(r)}else if(e.touches.length===1&&V&&L>1){e.preventDefault();let t=e.touches[0].clientX-te.x,n=e.touches[0].clientY-te.y,r=Oe();B({x:Math.max(-r.x,Math.min(r.x,t)),y:Math.max(-r.y,Math.min(r.y,n))})}},Fe=e=>{e.touches.length<2&&(ie(null),oe(null)),e.touches.length===0&&ee(!1)},Ie=()=>{R(1),B({x:0,y:0})},Le=D||!p&&(i||f)?``:(e=>p?`${e}&token=${encodeURIComponent(p)}`:gd(e))(m===`stream`?`/api/v1/printers/${s}/camera/stream?fps=${u}&t=${T}`:`/api/v1/printers/${s}/camera/snapshot?t=${T}`),Re=C||D||N;return s?(0,G.jsxs)(`div`,{ref:H,className:`min-h-screen bg-black flex flex-col`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-4 py-2 bg-bambu-dark-secondary border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`h1`,{className:`text-sm font-medium text-white flex items-center gap-2`,children:[(0,G.jsx)(ss,{className:`w-4 h-4`}),fe?.name||`Printer ${s}`]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex bg-bambu-dark rounded p-0.5`,children:[(0,G.jsx)(`button`,{onClick:()=>xe(`stream`),disabled:Re,className:`px-3 py-1 text-xs rounded transition-colors ${m===`stream`?`bg-bambu-green text-white`:`text-bambu-gray hover:text-white disabled:opacity-50`}`,children:e(`camera.live`)}),(0,G.jsx)(`button`,{onClick:()=>xe(`snapshot`),disabled:Re,className:`px-3 py-1 text-xs rounded transition-colors ${m===`snapshot`?`bg-bambu-green text-white`:`text-bambu-gray hover:text-white disabled:opacity-50`}`,children:e(`camera.snapshot`)})]}),(0,G.jsx)(`button`,{onClick:()=>me.mutate(!pe?.chamber_light),disabled:!pe?.connected||me.isPending||!r(`printers:control`),className:`p-1.5 rounded disabled:opacity-50 ${pe?.chamber_light?`bg-yellow-500/20 hover:bg-yellow-500/30`:`hover:bg-bambu-dark-tertiary`}`,title:r(`printers:control`)?e(`camera.chamberLight`):e(`printers.permission.noControl`),children:(0,G.jsx)(wT,{on:pe?.chamber_light??!1,className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>_(!0),disabled:!he||!r(`printers:control`),className:`p-1.5 rounded disabled:opacity-50 ${he&&r(`printers:control`)?`hover:bg-bambu-dark-tertiary`:``}`,title:r(`printers:control`)?e(he?`printers.skipObjects.tooltip`:`printers.skipObjects.onlyWhilePrinting`):e(`printers.permission.noControl`),children:(0,G.jsx)(TT,{className:`w-4 h-4 text-bambu-gray`})}),(0,G.jsx)(`button`,{onClick:Se,disabled:Re,className:`p-1.5 hover:bg-bambu-dark-tertiary rounded disabled:opacity-50`,title:e(m===`stream`?`camera.restartStream`:`camera.refreshSnapshot`),children:(0,G.jsx)(Vl,{className:`w-4 h-4 text-bambu-gray ${Re?`animate-spin`:``}`})}),(0,G.jsx)(`button`,{onClick:()=>b(!0),className:`p-1.5 hover:bg-bambu-dark-tertiary rounded`,title:e(`camera.diagnose.button`),children:(0,G.jsx)(xu,{className:`w-4 h-4 text-bambu-gray`})}),(0,G.jsx)(`button`,{onClick:Ce,className:`p-1.5 hover:bg-bambu-dark-tertiary rounded`,title:e(k?`camera.exitFullscreen`:`camera.fullscreen`),children:k?(0,G.jsx)(fl,{className:`w-4 h-4 text-bambu-gray`}):(0,G.jsx)(cl,{className:`w-4 h-4 text-bambu-gray`})})]})]}),(0,G.jsx)(`div`,{className:`flex-1 flex items-center justify-center p-2 overflow-hidden`,onWheel:Ee,onMouseMove:ke,onMouseUp:Ae,onMouseLeave:Ae,onTouchStart:Ne,onTouchMove:Pe,onTouchEnd:Fe,style:{touchAction:`none`},children:(0,G.jsxs)(`div`,{className:`relative w-full h-full flex items-center justify-center`,children:[(C||D)&&!N&&(0,G.jsx)(`div`,{className:`absolute inset-0 flex items-center justify-center bg-black/50 z-10`,children:(0,G.jsxs)(`div`,{className:`text-center`,children:[(0,G.jsx)(Vl,{className:`w-8 h-8 text-bambu-gray animate-spin mx-auto mb-2`}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(m===`stream`?`camera.connectingToCamera`:`camera.capturingSnapshot`)})]})}),N&&(0,G.jsx)(`div`,{className:`absolute inset-0 flex items-center justify-center bg-black/80 z-10`,children:(0,G.jsxs)(`div`,{className:`text-center p-4`,children:[(0,G.jsx)(Xu,{className:`w-10 h-10 text-orange-400 mx-auto mb-3`}),(0,G.jsx)(`p`,{className:`text-white mb-2`,children:e(`camera.connectionLost`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-3`,children:e(`camera.reconnecting`,{countdown:F,attempt:Math.min(j+1,a9),max:a9})}),(0,G.jsx)(`button`,{onClick:Se,className:`px-4 py-2 bg-bambu-green text-white text-sm rounded hover:bg-bambu-green/80 transition-colors`,children:e(`camera.reconnectNow`)})]})}),x&&!N&&(0,G.jsx)(`div`,{className:`absolute inset-0 flex items-center justify-center bg-black z-10`,children:(0,G.jsxs)(`div`,{className:`text-center p-4`,children:[(0,G.jsx)(Iu,{className:`w-12 h-12 text-orange-400 mx-auto mb-3`}),(0,G.jsx)(`p`,{className:`text-white mb-2`,children:e(`camera.cameraUnavailable`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-4 max-w-md`,children:e(`camera.cameraUnavailableDesc`)}),(0,G.jsxs)(`div`,{className:`flex gap-2 justify-center`,children:[(0,G.jsx)(`button`,{onClick:Se,className:`px-4 py-2 bg-bambu-green text-white rounded hover:bg-bambu-green/80 transition-colors`,children:e(`camera.retry`)}),(0,G.jsx)(`button`,{onClick:()=>b(!0),className:`px-4 py-2 bg-bambu-dark border border-bambu-dark-tertiary text-bambu-gray hover:text-white rounded transition-colors`,children:e(`camera.diagnose.button`)})]})]})}),(0,G.jsx)(`img`,{ref:se,src:Le,alt:e(`camera.cameraStream`),className:`max-w-full max-h-full object-contain select-none`,style:{transform:`scale(${L}) translate(${z.x/L}px, ${z.y/L}px) rotate(${fe?.camera_rotation||0}deg)`,...fe?.camera_rotation===90||fe?.camera_rotation===270?{maxWidth:`100vh`,maxHeight:`100vw`}:{},cursor:L>1?V?`grabbing`:`grab`:`default`},onError:Le?ve:void 0,onLoad:Le?ye:void 0,onMouseDown:De,draggable:!1},T),(0,G.jsxs)(`div`,{className:`absolute bottom-4 left-4 flex items-center gap-1.5 bg-black/60 rounded-lg px-2 py-1.5`,children:[(0,G.jsx)(`button`,{onClick:Te,disabled:L<=1,className:`p-1.5 hover:bg-white/10 rounded disabled:opacity-30`,title:e(`camera.zoomOut`),children:(0,G.jsx)(id,{className:`w-4 h-4 text-white`})}),(0,G.jsxs)(`button`,{onClick:Ie,className:`px-2 py-1 text-sm text-white hover:bg-white/10 rounded min-w-[48px]`,title:e(`camera.resetZoom`),children:[Math.round(L*100),`%`]}),(0,G.jsx)(`button`,{onClick:we,disabled:L>=4,className:`p-1.5 hover:bg-white/10 rounded disabled:opacity-30`,title:e(`camera.zoomIn`),children:(0,G.jsx)(nd,{className:`w-4 h-4 text-white`})})]})]})}),(0,G.jsx)(ET,{printerId:s,isOpen:g,onClose:()=>_(!1)}),v&&(0,G.jsx)(DT,{printerId:s,printerName:fe?.name||null,onClose:()=>b(!1)})]}):(0,G.jsx)(`div`,{className:`min-h-screen bg-black flex items-center justify-center`,children:(0,G.jsx)(`p`,{className:`text-white`,children:e(`camera.invalidPrinterId`)})})}var A$e=5e3,j$e=4,M$e=8,N$e=1,P$e=16,F$e=2,I$e=60;function L$e(e,t,n,r){let i=parseInt(e??``,10);return Number.isFinite(i)?Math.min(r,Math.max(n,i)):t}function R$e(e,t,n,r,i,a){return e.has(t)?L$e(e.get(t),r,i,a):L$e(localStorage.getItem(n),r,i,a)}function z$e(){let{t:e}=U(),t=rr(),{authEnabled:n,loading:r,user:i}=jd(),[a]=Ri(),o=a.get(`token`),s=o!=null&&o!==``,[c,l]=(0,y.useState)(()=>R$e(a,`maxLive`,`camWallMaxLive`,j$e,N$e,P$e)),[u,d]=(0,y.useState)(()=>R$e(a,`interval`,`camWallSnapshotSec`,M$e,F$e,I$e)),[f,p]=(0,y.useState)(()=>{let e=a.get(`status`)??localStorage.getItem(`camWallStatusMode`);return(s?[`off`,`compact`]:[`off`,`compact`,`full`]).includes(e)?e:`compact`});(0,y.useEffect)(()=>{if(s)return fd(o),()=>fd(null)},[s,o]);let m=K({queryKey:[`camwall-printers`,o],queryFn:()=>Z.getCamWallPrinters(o??void 0),enabled:s,refetchInterval:A$e}),h=K({queryKey:[`printers`],queryFn:()=>Z.getPrinters(),enabled:!s&&!r&&(!n||i!==null),refetchInterval:A$e}),g=(0,y.useMemo)(()=>{let e=new Map;for(let t of m.data??[])e.set(t.id,{connected:t.connected,state:t.state,progress:t.progress,remaining_time:t.remaining_time,layer_num:t.layer_num,total_layers:t.total_layers,hms_errors:t.hms_errors});return e},[m.data]);if(!s&&r)return(0,G.jsx)(`div`,{className:`flex min-h-screen items-center justify-center bg-bambu-dark text-bambu-gray`,children:e(`common.loading`)});if(!s&&n&&!i)return(0,G.jsx)(Fr,{to:`/login`,replace:!0,state:{from:t}});let _=s?m:h,v=s?m.data??[]:h.data??[];return _.isError?(0,G.jsx)(`div`,{className:`flex min-h-screen items-center justify-center bg-bambu-dark p-6 text-center`,children:(0,G.jsx)(`p`,{className:`max-w-md text-sm text-red-400`,children:e(s?`printers.camWall.page.tokenRejected`:`printers.camWall.page.loadFailed`)})}):(0,G.jsx)(`div`,{className:`min-h-screen bg-bambu-dark p-4`,children:(0,G.jsx)(PT,{printers:v,maxLive:c,snapshotIntervalSec:u,statusMode:f,statuses:s?g:void 0,showSettings:!s,onTileClick:s?void 0:e=>window.open(`/camera/${e}`,`camera-${e}`),onChangeMaxLive:e=>{l(e),localStorage.setItem(`camWallMaxLive`,String(e))},onChangeSnapshotIntervalSec:e=>{d(e),localStorage.setItem(`camWallSnapshotSec`,String(e))},onChangeStatusMode:e=>{p(e),localStorage.setItem(`camWallStatusMode`,e)}})})}function B$e(e,t,n){if(!e)return``;if(!t)return e;let r=t.match(/plate_(\d+)\.gcode/);return r&&parseInt(r[1],10)>1?`${e} — ${n(`printers.plateNumber`,`Plate {{number}}`,{number:r[1]})}`:e}function V$e(e){let t=e.get(`show`)?.split(`,`)||[`progress`,`layers`,`eta`,`filename`,`status`],n=parseInt(e.get(`fps`)||`15`,10),r=Math.min(Math.max(isNaN(n)?15:n,1),30),i=e.get(`camera`),a=i!==`false`&&i!==`0`;return{size:e.get(`size`)||`medium`,fps:r,showCamera:a,showProgress:t.includes(`progress`),showLayers:t.includes(`layers`),showEta:t.includes(`eta`),showFilename:t.includes(`filename`),showStatus:t.includes(`status`),showPrinter:t.includes(`printer`),showNozzle:t.includes(`nozzle`),showBed:t.includes(`bed`),showChamber:t.includes(`chamber`)}}function H$e(e,t){if(e.stg_cur_name)return e.stg_cur_name;switch(e.state){case`RUNNING`:return t(`streamOverlay.status.printing`);case`PAUSE`:return t(`streamOverlay.status.paused`);case`FINISH`:return t(`streamOverlay.status.finished`);case`FAILED`:return t(`streamOverlay.status.failed`);case`IDLE`:return t(`streamOverlay.status.idle`);default:return e.state||t(`streamOverlay.status.unknown`)}}function o9(e,t){let n=e[t];return typeof n==`number`?n:null}function U$e({icon:e,label:t,current:n,target:r,sizes:i}){let a=r!=null&&r>0&&Math.round(r)!==Math.round(n);return(0,G.jsxs)(`div`,{className:`flex items-center ${i.gap} text-white/70`,children:[e,(0,G.jsxs)(`span`,{className:i.text,children:[(0,G.jsx)(`span`,{className:`mr-1`,children:t}),(0,G.jsxs)(`span`,{className:`text-white`,children:[Math.round(n),`°C`]}),a&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{className:`mx-1`,children:`/`}),(0,G.jsxs)(`span`,{children:[Math.round(r),`°C`]})]})]})]})}function W$e(e){switch(e){case`small`:return{container:`p-3`,text:`text-sm`,textLarge:`text-lg`,progressHeight:`h-2`,icon:`w-3 h-3`,gap:`gap-2`,logoHeight:`h-12`};case`large`:return{container:`p-6`,text:`text-xl`,textLarge:`text-3xl`,progressHeight:`h-4`,icon:`w-6 h-6`,gap:`gap-4`,logoHeight:`h-24`};default:return{container:`p-4`,text:`text-base`,textLarge:`text-xl`,progressHeight:`h-3`,icon:`w-4 h-4`,gap:`gap-3`,logoHeight:`h-16`}}}function G$e(){let{printerId:e}=dr(),[t]=Ri(),{t:n}=U(),r=co(),i=parseInt(e||`0`,10),[a,o]=(0,y.useState)(Date.now()),s=(0,y.useMemo)(()=>V$e(t),[t]),c=W$e(s.size),l=t.get(`token`),u=l!=null&&l!==``,{data:d}=K({queryKey:[`overlayStatus`,i,l],queryFn:()=>Z.getOverlayStatus(i,l??void 0),enabled:i>0&&u,refetchInterval:2e3}),{data:f}=K({queryKey:[`printer`,i],queryFn:()=>Z.getPrinter(i),enabled:i>0&&!u}),{data:p}=K({queryKey:[`printerStatus`,i],queryFn:()=>Z.getPrinterStatus(i),enabled:i>0&&!u,refetchInterval:2e3}),{data:m}=K({queryKey:[`settings`],queryFn:Z.getSettings,enabled:!u}),h=(0,y.useMemo)(()=>u?d&&{name:d.name,camera_rotation:d.camera_rotation}:f,[u,d,f]),g=u?d:p,_=(u?d?.time_format:m?.time_format)||`system`;(0,y.useEffect)(()=>{if(!i||u)return;let e=null,t=!1;return(async()=>{let n;try{n=(await Z.getWebSocketToken()).token}catch(e){let t=e instanceof od?e.status:0;if(t===401||t===403)return}if(t)return;let a=window.location.protocol===`https:`?`wss:`:`ws:`,o=n?`?token=${encodeURIComponent(n)}`:``,s=`${a}//${window.location.host}/api/v1/ws${o}`;e=new WebSocket(s),e.onmessage=e=>{try{let t=JSON.parse(e.data);t.type===`printer_status`&&t.printer_id===i&&r.setQueryData([`printerStatus`,i],t.status)}catch{}},e.onerror=()=>{}})(),()=>{t=!0,e&&e.close()}},[i,u,r]),(0,y.useEffect)(()=>(document.title=h?`${h.name} - ${n(`streamOverlay.title`)}`:n(`streamOverlay.title`),()=>{document.title=`Bambuddy`}),[h,n]);let v=()=>{setTimeout(()=>{o(Date.now())},3e3)};if(!i)return(0,G.jsx)(`div`,{className:`min-h-screen bg-black flex items-center justify-center`,children:(0,G.jsx)(`p`,{className:`text-white`,children:n(`streamOverlay.invalidPrinterId`)})});if(!g)return(0,G.jsx)(`div`,{className:`min-h-screen bg-black flex items-center justify-center`,children:(0,G.jsx)(`p`,{className:`text-gray-400`,children:n(`common.loading`)})});let b=g.state===`RUNNING`||g.state===`PAUSE`,x=g.progress||0,S=g.temperatures??{},C=[];if(s.showNozzle){let e=o9(S,`nozzle`),t=o9(S,`nozzle_2`);e!=null&&C.push({key:`nozzle`,icon:(0,G.jsx)(mc,{className:c.icon}),label:n(`printers.heaterHistory.nozzle`,`Nozzle`),current:e,target:o9(S,`nozzle_target`)}),t!=null&&C.push({key:`nozzle_2`,icon:(0,G.jsx)(mc,{className:c.icon}),label:n(`printers.heaterHistory.nozzle2`,`Nozzle 2`),current:t,target:o9(S,`nozzle_2_target`)})}if(s.showBed){let e=o9(S,`bed`);e!=null&&C.push({key:`bed`,icon:(0,G.jsx)(yu,{className:c.icon}),label:n(`printers.heaterHistory.bed`,`Bed`),current:e,target:o9(S,`bed_target`)})}if(s.showChamber){let e=o9(S,`chamber`);e!=null&&C.push({key:`chamber`,icon:(0,G.jsx)(Zo,{className:c.icon}),label:n(`printers.heaterHistory.chamber`,`Chamber`),current:e,target:o9(S,`chamber_target`)})}let w=`/api/v1/printers/${i}/camera/stream?fps=${s.fps}&t=${a}`,T=u&&l?`${w}&token=${encodeURIComponent(l)}`:gd(w);return(0,G.jsxs)(`div`,{className:`min-h-screen bg-black relative overflow-hidden`,children:[s.showCamera&&(0,G.jsx)(`img`,{src:T,alt:n(`streamOverlay.cameraStream`),className:`absolute inset-0 w-full h-full object-contain`,style:h?.camera_rotation?{transform:`rotate(${h.camera_rotation}deg)`}:void 0,onError:v},a),(0,G.jsx)(`a`,{href:`https://github.com/maziggy/bambuddy`,target:`_blank`,rel:`noopener noreferrer`,className:`absolute top-4 right-4 z-10`,children:(0,G.jsx)(`img`,{src:`/img/bambuddy_logo_dark_transparent.png`,alt:`Bambuddy`,className:`${c.logoHeight} object-contain drop-shadow-lg hover:scale-105 transition-transform`})}),(0,G.jsx)(`div`,{className:`absolute bottom-0 left-0 right-0 z-10 bg-gradient-to-t from-black/80 via-black/60 to-transparent`,children:(0,G.jsxs)(`div`,{className:`${c.container}`,children:[s.showPrinter&&h&&(0,G.jsxs)(`div`,{className:`flex items-center ${c.gap} mb-2`,children:[(0,G.jsx)(Ll,{className:`${c.icon} text-white/70`}),(0,G.jsx)(`span`,{className:`${c.text} text-white font-medium`,children:h.name})]}),s.showFilename&&g.current_print&&(0,G.jsx)(`div`,{className:`${c.textLarge} text-white font-semibold mb-2 truncate drop-shadow-md`,children:B$e(g.current_print.replace(/\.gcode\.3mf$|\.3mf$|\.gcode$/i,``),g.gcode_file,n)}),s.showStatus&&(0,G.jsx)(`div`,{className:`${c.text} text-white/70 mb-2`,children:H$e(g,n)}),s.showProgress&&b&&(0,G.jsxs)(`div`,{className:`mb-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-1 ${c.text}`,children:[(0,G.jsx)(`span`,{className:`text-white/70`,children:n(`streamOverlay.progress`)}),(0,G.jsxs)(`span`,{className:`text-white font-bold`,children:[Math.round(x),`%`]})]}),(0,G.jsx)(`div`,{className:`w-full bg-white/20 rounded-full ${c.progressHeight}`,children:(0,G.jsx)(`div`,{className:`bg-bambu-green ${c.progressHeight} rounded-full transition-all duration-500`,style:{width:`${x}%`}})})]}),b&&(s.showLayers||s.showEta)&&(0,G.jsxs)(`div`,{className:`flex items-center ${c.gap} flex-wrap`,children:[s.showLayers&&g.layer_num!=null&&g.total_layers!=null&&g.total_layers>0&&(0,G.jsxs)(`div`,{className:`flex items-center ${c.gap} text-white/70`,children:[(0,G.jsx)(qc,{className:c.icon}),(0,G.jsxs)(`span`,{className:c.text,children:[(0,G.jsx)(`span`,{className:`text-white`,children:g.layer_num}),(0,G.jsx)(`span`,{className:`mx-1`,children:`/`}),(0,G.jsx)(`span`,{children:g.total_layers})]})]}),s.showEta&&g.remaining_time!=null&&g.remaining_time>0&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex items-center ${c.gap} text-white/70`,children:[(0,G.jsx)(Mu,{className:c.icon}),(0,G.jsx)(`span`,{className:`${c.text} text-white`,children:op(g.remaining_time*60)})]}),(0,G.jsxs)(`div`,{className:`flex items-center ${c.gap} text-white/70`,children:[(0,G.jsx)(js,{className:c.icon}),(0,G.jsxs)(`span`,{className:`${c.text} text-white`,children:[n(`streamOverlay.eta`),` `,ap(g.remaining_time,_,n)]})]})]})]}),!b&&(0,G.jsx)(`div`,{className:`${c.text} text-white/70 py-2`,children:g.connected?n(`streamOverlay.printerIdle`):n(`streamOverlay.printerOffline`)}),C.length>0&&(0,G.jsx)(`div`,{className:`flex items-center ${c.gap} flex-wrap mt-2`,children:C.map(e=>(0,G.jsx)(U$e,{icon:e.icon,label:e.label,current:e.current,target:e.target,sizes:c},e.key))})]})})]})}function K$e(){let{t:e}=U(),{id:t}=dr(),{mode:n}=Pd(),{data:r,isLoading:i,error:a}=K({queryKey:[`external-link`,t],queryFn:()=>Z.getExternalLink(Number(t)),enabled:!!t});return i?(0,G.jsx)(`div`,{className:`flex items-center justify-center h-full`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):a||!r?(0,G.jsxs)(`div`,{className:`flex flex-col items-center justify-center h-full gap-4 text-bambu-gray`,children:[(0,G.jsx)(Iu,{className:`w-12 h-12`}),(0,G.jsx)(`p`,{children:e(`common.linkNotFound`)})]}):(0,G.jsx)(`iframe`,{src:r.url,className:`h-full w-full border-0`,style:{colorScheme:n},title:r.name,sandbox:`allow-scripts allow-same-origin allow-forms allow-popups allow-popups-to-escape-sandbox`})}function q$e(){let{id:e}=dr(),t=or(),n=co(),{t:r}=U(),{showToast:i}=Gd(),a=!!e,[o,s]=(0,y.useState)(``),[c,l]=(0,y.useState)(``),[u,d]=(0,y.useState)([]),[f,p]=(0,y.useState)(``),[m,h]=(0,y.useState)(!1),{data:g,isLoading:_}=K({queryKey:[`group`,e],queryFn:()=>Z.getGroup(Number(e)),enabled:a}),{data:v,isLoading:b}=K({queryKey:[`permissions`],queryFn:()=>Z.getPermissions()});a&&g&&!m&&(s(g.name),l(g.description||``),d(g.permissions),h(!0));let x=q({mutationFn:e=>Z.createGroup(e),onSuccess:()=>{n.invalidateQueries({queryKey:[`groups`]}),n.invalidateQueries({queryKey:[`group`]}),i(r(`groups.toast.created`)),t(`/settings?tab=users`)},onError:e=>{i(e.message,`error`)}}),S=q({mutationFn:t=>Z.updateGroup(Number(e),t),onSuccess:a=>{n.invalidateQueries({queryKey:[`groups`]}),a&&n.setQueryData([`group`,e],a),i(r(`groups.toast.updated`)),t(`/settings?tab=users`)},onError:e=>{i(e.message,`error`)}}),C=x.isPending||S.isPending,w=()=>{if(!o.trim()){i(r(`groups.toast.enterGroupName`),`error`);return}a?S.mutate({name:o===g?.name?void 0:o,description:c,permissions:u}):x.mutate({name:o,description:c||void 0,permissions:u})},T=e=>{d(t=>t.includes(e)?t.filter(t=>t!==e):[...t,e])},E=(e,t)=>{let n=e.permissions.map(e=>e.value);d(e=>{let r=e.filter(e=>!n.includes(e));return t?[...r,...n]:r})},D=e=>e.permissions.every(e=>u.includes(e.value)),O=e=>{let t=e.permissions.filter(e=>u.includes(e.value)).length;return t>0&&t<e.permissions.length},k=()=>{v&&d(v.all_permissions)},A=()=>{d([])},j=f.toLowerCase(),M=(0,y.useMemo)(()=>v?j?v.categories.map(e=>({...e,permissions:e.permissions.filter(e=>e.label.toLowerCase().includes(j))})).filter(e=>e.permissions.length>0):v.categories:[],[v,j]),N=v?.all_permissions.length??0;return _||b?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-16`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):(0,G.jsxs)(`div`,{className:`space-y-6 max-w-5xl mx-auto`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`button`,{onClick:()=>t(`/settings?tab=users`),className:`p-2 rounded-lg hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(Lo,{className:`w-5 h-5`})}),(0,G.jsx)(`h1`,{className:`text-xl font-bold text-white`,children:r(a?`groups.editor.title`:`groups.editor.createTitle`)})]}),a&&g?.is_system&&(0,G.jsxs)(`div`,{className:`flex items-center gap-3 px-4 py-3 rounded-lg bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/20 text-yellow-700 dark:text-yellow-400 text-sm`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 shrink-0`}),r(`groups.form.systemGroupWarning`)]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:r(`groups.form.groupName`)}),(0,G.jsx)(`input`,{type:`text`,value:o,onChange:e=>s(e.target.value),disabled:a&&g?.is_system,className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors disabled:opacity-50`,placeholder:r(`groups.form.groupNamePlaceholder`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:r(`groups.form.description`)}),(0,G.jsx)(`input`,{type:`text`,value:c,onChange:e=>l(e.target.value),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:r(`groups.form.descriptionPlaceholder`)})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between flex-wrap gap-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[r(`groups.editor.permissionsSelected`,{count:u.length}),` / `,N]}),(0,G.jsx)(Q,{size:`sm`,variant:`ghost`,onClick:k,children:r(`groups.editor.selectAll`)}),(0,G.jsx)(Q,{size:`sm`,variant:`ghost`,onClick:A,children:r(`groups.editor.clearAll`)})]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`w-4 h-4 absolute left-3 top-1/2 -translate-y-1/2 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:f,onChange:e=>p(e.target.value),placeholder:r(`groups.editor.search`),className:`pl-9 pr-4 py-2 text-sm bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors w-64`})]})]}),M.length===0?(0,G.jsx)(`div`,{className:`text-center py-12 text-bambu-gray`,children:r(`groups.editor.noResults`)}):(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-4`,children:M.map(e=>{let t=v.categories.find(t=>t.name===e.name),n=t.permissions.filter(e=>u.includes(e.value)).length,i=t.permissions.length,a=D(t),o=O(t);return(0,G.jsxs)(Ld,{children:[(0,G.jsxs)(`div`,{className:`sticky top-0 z-10 flex items-center justify-between px-4 py-3 bg-bambu-dark-secondary border-b border-bambu-dark-tertiary rounded-t-xl`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>E(t,!a),className:`w-5 h-5 rounded border flex items-center justify-center transition-colors shrink-0 ${a?`bg-bambu-green border-bambu-green`:o?`bg-bambu-green/50 border-bambu-green`:`border-bambu-gray hover:border-white`}`,children:[a&&(0,G.jsx)(fs,{className:`w-3 h-3 text-white`}),o&&!a&&(0,G.jsx)(pl,{className:`w-3 h-3 text-white`})]}),(0,G.jsx)(ou,{className:`w-4 h-4 text-bambu-gray shrink-0`}),(0,G.jsx)(`span`,{className:`text-white font-medium text-sm`,children:e.name})]}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray tabular-nums`,children:[n,`/`,i]})]}),(0,G.jsx)(`div`,{className:`p-3 space-y-1`,children:e.permissions.map(e=>(0,G.jsxs)(`label`,{className:`flex items-center gap-3 px-2 py-1.5 rounded hover:bg-bambu-dark-secondary cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:u.includes(e.value),onChange:()=>T(e.value),className:`w-4 h-4 shrink-0 rounded border-bambu-gray text-bambu-green focus:ring-bambu-green focus:ring-offset-0 bg-bambu-dark-secondary`}),(0,G.jsxs)(`span`,{className:`flex flex-col`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.label}),e.value===`websocket:connect`&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray/60`,children:r(`groups.editor.websocketHint`)})]})]},e.value))})]},e.name)})}),(0,G.jsx)(`div`,{className:`h-16`}),(0,G.jsxs)(`div`,{className:`fixed bottom-0 left-0 right-0 z-20 px-6 py-3 bg-bambu-dark-secondary border-t border-bambu-dark-tertiary flex items-center justify-center gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>t(`/settings?tab=users`),children:r(`common.cancel`)}),(0,G.jsx)(Q,{onClick:w,disabled:C||!o.trim(),children:C?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),r(`common.saving`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Kl,{className:`w-4 h-4`}),r(`common.save`)]})})]})]})}var J$e=1.65,Y$e=[`#1DB954`,`#3B82F6`,`#F59E0B`,`#EF4444`,`#8B5CF6`];function s9(e,t,n,r){return`${e}||${t??``}||${n??``}||${r??``}`}function c9(e,t){let n=new Date(e);return n.setDate(n.getDate()+Math.round(t)),n}function l9(e){return e.toLocaleDateString(void 0,{month:`short`,day:`numeric`,year:`numeric`})}function u9(e){return e.toLocaleDateString(void 0,{month:`short`,day:`numeric`})}function X$e(e){if(e.length<2)return null;let t=new Map;for(let n of e){let e=n.created_at.slice(0,10);t.set(e,(t.get(e)??0)+n.weight_used)}if(t.size<2)return null;let n=[...t.entries()].map(([e,t])=>({ms:new Date(e).getTime(),totalG:t})).sort((e,t)=>e.ms-t.ms),r=Date.now(),i=Math.LN2/30,a=[];for(let e=1;e<n.length;e++){let t=Math.max((n[e].ms-n[e-1].ms)/864e5,1),o=(r-n[e].ms)/864e5,s=n[e].totalG/t,c=Math.exp(-i*o);a.push({rate:s,weight:c})}let o=a.reduce((e,t)=>e+t.weight,0);if(o===0)return null;let s=a.reduce((e,t)=>e+t.rate*t.weight,0)/o,c=a.reduce((e,t)=>e+t.weight*(t.rate-s)**2,0)/o;return{rate:s,stdDev:Math.sqrt(c)}}function Z$e(e){let t=e.reduce((e,t)=>e+Math.max(0,t.weight_used-(t.weight_used_baseline??0)),0);if(t===0)return null;let n=Date.now(),r=(n-e.reduce((e,t)=>{let n=new Date(t.created_at).getTime();return n<e?n:e},n))/864e5;return r<1?null:t/r}function Q$e(e,t=60){if(e.dailyRateG===null)return[];let n=e.dailyRateG,r=[];for(let i=0;i<=t;i++){let t=Math.max(0,e.totalRemainingG-n*i);if(r.push({day:i,label:u9(c9(new Date,i)),stock:Math.round(t),rop:Math.round(e.reorderPointG)}),t===0)break}return r}function $$e({spools:e}){let t=co(),{showToast:n}=Gd(),{t:r}=U(),{hasPermission:i,hasAnyPermission:a}=jd(),o=i(`inventory:forecast_read`),s=a(`inventory:forecast_write`,`inventory:update`),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(`material`),[f,p]=(0,y.useState)(`asc`),[m,h]=(0,y.useState)(``),[g,_]=(0,y.useState)(``),[v,b]=(0,y.useState)(null),[x,S]=(0,y.useState)(!1),[C,w]=(0,y.useState)(30),{data:T}=K({queryKey:[`settings`],queryFn:Z.getSettings,enabled:o}),{data:E=[]}=K({queryKey:[`sku-settings`],queryFn:Z.getSkuSettings,staleTime:6e4,enabled:o}),{data:D=[]}=K({queryKey:[`all-usage-history-forecast`],queryFn:()=>Z.getAllUsageHistory(5e3),staleTime:6e4,enabled:o}),{data:O=[]}=K({queryKey:[`shopping-list`],queryFn:Z.getShoppingList,staleTime:3e4,enabled:o}),k=T?.forecast_global_lead_time_days??0,A=(0,y.useMemo)(()=>{let e=new Map;for(let t of E)e.set(s9(t.material,t.subtype,t.brand,t.color_name),t);return e},[E]),j=(0,y.useMemo)(()=>{let e=new Map;for(let t of D){let n=e.get(t.spool_id)??[];n.push(t),e.set(t.spool_id,n)}return e},[D]),M=(0,y.useMemo)(()=>{let t=new Map;for(let n of e){if(n.archived_at)continue;let e=s9(n.material,n.subtype,n.brand,n.color_name),r=t.get(e)??{key:e,material:n.material,subtype:n.subtype,brand:n.brand,colorName:n.color_name,spools:[]};r.spools.push(n),t.set(e,r)}return[...t.values()]},[e]),N=(0,y.useMemo)(()=>{let e=new Date;return e.setHours(0,0,0,0),M.map(t=>{let n=A.get(t.key)??(t.colorName===null?null:A.get(s9(t.material,t.subtype,t.brand,null))??null),r=n?.lead_time_days??0,i=Math.max(k,r),a=n?.safety_margin_value??14,o=n?.safety_margin_unit??`days`,s=t.spools.reduce((e,t)=>e+Math.max(0,t.label_weight-t.weight_used),0),c=t.spools.reduce((e,t)=>e+t.label_weight,0),l=t.spools.reduce((e,t)=>e+Math.max(0,t.weight_used-(t.weight_used_baseline??0)),0),u=[];for(let e of t.spools)(e.weight_used_baseline??0)===0&&u.push(...j.get(e.id)??[]);let d=null,f=null,p=`none`,m=X$e(u);if(m!==null)d=m.rate,f=m.stdDev,p=`history`;else{let e=Z$e(t.spools);e!==null&&(d=e,p=`delta`)}let h=J$e*(f??(d===null?0:d*.2))*Math.sqrt(i)+(o===`g`?a:d===null?a*5:d*a),g=d===null?0:d*i+h,_=d&&d>0?Math.floor(s/d):null,v=_===null?null:c9(e,_),y=d&&d>0?Math.floor((s-g)/d):null,b=y===null?null:c9(e,Math.max(0,y)),x=_!==null&&i>0&&_<=i,S=!x&&y!==null&&y<=0;return{group:t,settings:n,totalRemainingG:s,totalLabelG:c,totalSpools:t.spools.length,totalUsedG:l,dailyRateG:d,dailyRateStdDev:f,rateTier:p,effectiveLeadTimeDays:i,safetyStockG:h,reorderPointG:g,daysRemaining:_,daysUntilROP:y,projectedEmptyDate:v,reorderTriggerDate:b,reorderAlert:S,stockBreakAlert:x}})},[M,A,j,k]),P=(0,y.useMemo)(()=>[...new Set(M.map(e=>e.material))].sort(),[M]),F=(0,y.useMemo)(()=>[...new Set(M.map(e=>e.brand).filter(Boolean))].sort(),[M]),I=(0,y.useMemo)(()=>{let e=[...N];return m&&(e=e.filter(e=>e.group.material===m)),g&&(e=e.filter(e=>e.group.brand===g)),e.sort((e,t)=>{let n=0,r=0;switch(u){case`material`:n=[e.group.material,e.group.subtype??``,e.group.brand??``].join(` `).toLowerCase(),r=[t.group.material,t.group.subtype??``,t.group.brand??``].join(` `).toLowerCase();break;case`used`:n=e.totalUsedG,r=t.totalUsedG;break;case`days_left`:n=e.daysRemaining??999999,r=t.daysRemaining??999999;break;case`stock`:n=e.totalRemainingG,r=t.totalRemainingG;break}let i=n<r?-1:+(n>r);return f===`asc`?i:-i}),e},[N,u,f,m,g]),L=(0,y.useMemo)(()=>N.filter(e=>!e.settings?.alerts_snoozed&&(e.stockBreakAlert||e.reorderAlert)),[N]),R=(0,y.useMemo)(()=>[...N].filter(e=>e.dailyRateG!==null).sort((e,t)=>t.totalUsedG-e.totalUsedG).slice(0,5),[N]);if(!o)return(0,G.jsxs)(`div`,{className:`flex flex-col items-center justify-center py-16 text-bambu-gray gap-3`,children:[(0,G.jsx)(tl,{className:`w-8 h-8 opacity-40`}),(0,G.jsx)(`p`,{className:`text-sm`,children:r(`forecast.noReadAccess`)})]});function z(e){u===e?p(e=>e===`asc`?`desc`:`asc`):(d(e),p(e===`days_left`?`asc`:`desc`))}let B=O.length>0?O.length:null;return(0,G.jsxs)(`div`,{className:`space-y-5`,children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-3`,children:[L.length>0&&(0,G.jsxs)(`button`,{onClick:()=>l(e=>!e),className:`flex items-center gap-2 px-3 py-1.5 rounded-lg border text-sm font-medium transition-colors ${L.some(e=>e.stockBreakAlert)?`bg-red-100 dark:bg-red-500/15 border-red-300 dark:border-red-500/30 text-red-700 dark:text-red-300 hover:bg-red-200 dark:hover:bg-red-500/25`:`bg-yellow-100 dark:bg-yellow-500/15 border-yellow-300 dark:border-yellow-500/30 text-yellow-700 dark:text-yellow-300 hover:bg-yellow-200 dark:hover:bg-yellow-500/25`}`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4`}),r(`forecast.alertCount`,{count:L.length}),c?(0,G.jsx)(gs,{className:`w-3.5 h-3.5`}):(0,G.jsx)(ps,{className:`w-3.5 h-3.5`})]}),s&&(0,G.jsx)(r1e,{value:k,onSave:e=>{Z.updateSettings({forecast_global_lead_time_days:e}).then(()=>{t.invalidateQueries({queryKey:[`settings`]}),n(r(`forecast.globalLeadTimeSaved`),`success`)})}}),(0,G.jsxs)(`select`,{value:m,onChange:e=>h(e.target.value),className:`px-3 py-1.5 rounded-lg border text-xs font-medium transition-colors cursor-pointer focus:outline-none ${m?`bg-bambu-green/20 text-bambu-green border-bambu-green/30`:`bg-transparent text-bambu-gray border-bambu-dark-tertiary hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(`option`,{value:``,children:r(`inventory.material`)}),P.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]}),(0,G.jsxs)(`select`,{value:g,onChange:e=>_(e.target.value),className:`px-3 py-1.5 rounded-lg border text-xs font-medium transition-colors cursor-pointer focus:outline-none ${g?`bg-bambu-green/20 text-bambu-green border-bambu-green/30`:`bg-transparent text-bambu-gray border-bambu-dark-tertiary hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(`option`,{value:``,children:r(`inventory.brand`)}),F.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]}),(0,G.jsxs)(`button`,{onClick:()=>S(e=>!e),className:`relative flex items-center gap-2 px-3 py-1.5 rounded-lg border border-bambu-dark-tertiary text-bambu-gray hover:bg-bambu-dark-tertiary text-sm transition-colors ml-auto`,children:[(0,G.jsx)(su,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:r(`forecast.shoppingList`)}),B&&(0,G.jsx)(`span`,{className:`absolute -top-1.5 -right-1.5 w-4 h-4 rounded-full bg-bambu-green text-white text-[10px] font-bold flex items-center justify-center`,children:B})]})]}),c&&L.length>0&&(0,G.jsx)(`div`,{className:`space-y-2`,children:L.map(e=>(0,G.jsx)(e1e,{forecast:e,onCart:()=>b(e)},e.group.key))}),x&&(0,G.jsx)(c1e,{items:O,forecasts:N,globalLeadTime:k,canWrite:s,onClose:()=>S(!1),onRemove:e=>{Z.removeFromShoppingList(e).then(()=>t.invalidateQueries({queryKey:[`shopping-list`]})).catch(()=>n(r(`forecast.failedSaveSettings`),`error`))},onClear:()=>{Z.clearShoppingList().then(()=>t.invalidateQueries({queryKey:[`shopping-list`]})).catch(()=>n(r(`forecast.failedSaveSettings`),`error`))}}),R.length>0&&(0,G.jsx)(n1e,{forecasts:R,days:C,onDaysChange:w}),N.length===0?(0,G.jsxs)(`div`,{className:`flex flex-col items-center justify-center py-16 text-bambu-gray`,children:[(0,G.jsx)(Pu,{className:`w-10 h-10 mb-3 opacity-40`}),(0,G.jsx)(`p`,{className:`text-sm`,children:r(`forecast.noSpools`)})]}):(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg overflow-hidden border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary bg-bambu-dark-tertiary/30`,children:[(0,G.jsx)(`th`,{className:`w-8 px-4 py-3`}),(0,G.jsx)(d9,{col:`material`,active:u,dir:f,onSort:z,children:r(`forecast.sku`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:r(`locations.spools`)}),(0,G.jsx)(d9,{col:`stock`,active:u,dir:f,onSort:z,children:r(`forecast.stock`)}),(0,G.jsx)(d9,{col:`used`,active:u,dir:f,onSort:z,children:r(`forecast.dailyRate`)}),(0,G.jsx)(d9,{col:`days_left`,active:u,dir:f,onSort:z,children:r(`forecast.daysLeft`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:r(`forecast.emptyBy`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:r(`forecast.reorderBy`)}),(0,G.jsx)(`th`,{className:`w-24 px-4 py-3`})]})}),(0,G.jsx)(`tbody`,{className:`divide-y divide-bambu-dark-tertiary`,children:I.map(e=>(0,G.jsx)(i1e,{forecast:e,globalLeadTime:k,canWrite:s,onSaved:()=>t.invalidateQueries({queryKey:[`sku-settings`]}),onCart:()=>b(e),showToast:n},e.group.key))})]})}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-4 px-4 py-3 text-xs text-bambu-gray border-t border-bambu-dark-tertiary bg-bambu-dark-tertiary/20`,children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full bg-bambu-green inline-block`}),r(`forecast.trendLegend`)]}),(0,G.jsxs)(`span`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full bg-blue-400 inline-block`}),r(`forecast.estimatedLegend`)]}),(0,G.jsxs)(`span`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full bg-bambu-gray/40 inline-block`}),r(`forecast.noDataLegend`)]})]})]}),v&&(0,G.jsx)(u1e,{forecast:v,onClose:()=>b(null),onAdd:e=>{Z.addToShoppingList(e).then(()=>{t.invalidateQueries({queryKey:[`shopping-list`]}),n(r(`forecast.addedToCart`),`success`),b(null),S(!0)}).catch(()=>n(r(`forecast.failedAddItem`),`error`))}})]})}function d9({col:e,active:t,dir:n,onSort:r,children:i}){return(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide cursor-pointer select-none hover:text-white transition-colors`,onClick:()=>r(e),children:(0,G.jsxs)(`span`,{className:`inline-flex items-center`,children:[i,t===e?n===`asc`?(0,G.jsx)(Ho,{className:`w-3 h-3 ml-1 text-bambu-green`}):(0,G.jsx)(Io,{className:`w-3 h-3 ml-1 text-bambu-green`}):(0,G.jsx)(Bo,{className:`w-3 h-3 ml-1 opacity-40`})]})})}function e1e({forecast:e,onCart:t}){let{t:n}=U(),r=[e.group.brand,e.group.material,e.group.subtype,e.group.colorName].filter(Boolean).join(` `),i=e.stockBreakAlert;return(0,G.jsxs)(`div`,{className:`flex items-center gap-3 px-4 py-3 rounded-lg border text-sm ${i?`bg-red-50 dark:bg-red-500/10 border-red-300 dark:border-red-500/30 text-red-700 dark:text-red-300`:`bg-yellow-50 dark:bg-yellow-500/10 border-yellow-300 dark:border-yellow-500/30 text-yellow-700 dark:text-yellow-300`}`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`span`,{className:`font-medium`,children:r}),i?(0,G.jsxs)(`span`,{className:`ml-2 text-xs opacity-80`,children:[n(`forecast.stockBreakRisk`),` — `,n(`forecast.stockBreakDetail`,{days:e.daysRemaining,lt:e.effectiveLeadTimeDays})]}):(0,G.jsxs)(`span`,{className:`ml-2 text-xs opacity-80`,children:[n(`forecast.reorderNow`),` — `,n(`forecast.reorderTriggerPassed`,{date:e.reorderTriggerDate?l9(e.reorderTriggerDate):`—`})]})]}),(0,G.jsxs)(`button`,{onClick:t,className:`flex items-center gap-1.5 px-2.5 py-1 rounded border border-current text-xs opacity-70 hover:opacity-100 transition-opacity`,children:[(0,G.jsx)(su,{className:`w-3 h-3`}),` `,n(`forecast.order`)]})]})}var t1e=[{label:`1W`,value:7},{label:`1M`,value:30},{label:`6M`,value:180}];function n1e({forecasts:e,days:t,onDaysChange:n}){let{t:r}=U(),i=Array.from({length:t+1},(e,t)=>t),a=e.map((e,n)=>({key:e.group.key,label:[e.group.brand,e.group.material,e.group.subtype,e.group.colorName].filter(Boolean).join(` `),color:Y$e[n%Y$e.length],rop:e.reorderPointG,points:Q$e(e,t)})),o=i.map(e=>{let t={day:e,label:u9(c9(new Date,e))};for(let n of a){let r=n.points.find(t=>t.day===e);t[n.key]=r?.stock??0}return t}),s=(()=>{for(let e=t;e>=0;e--)if(a.some(t=>o[e]?.[t.key]>0))return e;return t})(),c=o.slice(0,s+1),l=a.filter(e=>e.rop>0);return(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg overflow-hidden border border-bambu-dark-tertiary p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-4`,children:[(0,G.jsx)(Pu,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-white`,children:r(`forecast.chartTitle`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray ml-1 hidden sm:inline`,children:r(`forecast.dashedLinesROP`)}),(0,G.jsx)(`div`,{className:`ml-auto flex items-center bg-bambu-dark-tertiary rounded-lg p-0.5`,children:t1e.map(e=>(0,G.jsx)(`button`,{onClick:()=>n(e.value),className:`px-2.5 py-1 text-xs font-medium rounded-md transition-colors ${t===e.value?`bg-bambu-dark-secondary text-white shadow`:`text-bambu-gray hover:text-white`}`,children:e.label},e.value))})]}),(0,G.jsx)(lA,{width:`100%`,height:220,children:(0,G.jsxs)(pU,{data:c,margin:{top:4,right:8,bottom:0,left:0},children:[(0,G.jsx)(`defs`,{children:a.map(e=>(0,G.jsxs)(`linearGradient`,{id:`grad-${e.key}`,x1:`0`,y1:`0`,x2:`0`,y2:`1`,children:[(0,G.jsx)(`stop`,{offset:`5%`,stopColor:e.color,stopOpacity:.25}),(0,G.jsx)(`stop`,{offset:`95%`,stopColor:e.color,stopOpacity:.02})]},e.key))}),(0,G.jsx)(yV,{strokeDasharray:`3 3`,stroke:`#374151`,strokeOpacity:.5}),(0,G.jsx)(CH,{dataKey:`label`,tick:{fill:`#6B7280`,fontSize:10},interval:Math.max(0,Math.ceil(s/8)-1),axisLine:!1,tickLine:!1}),(0,G.jsx)(OH,{tick:{fill:`#6B7280`,fontSize:10},axisLine:!1,tickLine:!1,tickFormatter:e=>e>=1e3?`${(e/1e3).toFixed(1)}kg`:`${e}g`,width:48}),(0,G.jsx)(tz,{content:({label:e,payload:t})=>t?.length?(0,G.jsxs)(`div`,{style:{background:`#1a1a2e`,border:`1px solid #374151`,borderRadius:8,fontSize:12,padding:`8px 12px`},children:[(0,G.jsx)(`div`,{style:{color:`#9CA3AF`,marginBottom:6},children:e}),t.map(e=>{let t=a.find(t=>t.key===String(e.dataKey));return typeof e.value==`number`?(0,G.jsxs)(`div`,{style:{display:`flex`,alignItems:`center`,gap:6,color:`#E5E7EB`,marginBottom:2},children:[(0,G.jsx)(`span`,{style:{color:t?.color??`#9CA3AF`,fontSize:10},children:`●`}),(0,G.jsx)(`span`,{children:t?.label??String(e.dataKey)}),(0,G.jsxs)(`span`,{style:{color:`#9CA3AF`,marginLeft:4},children:[e.value,`g`]})]},String(e.dataKey)):null})]}):null}),(0,G.jsx)(nj,{formatter:e=>(0,G.jsx)(`span`,{style:{color:`#9CA3AF`,fontSize:11},children:a.find(t=>t.key===e)?.label??e})}),a.map(e=>(0,G.jsx)(tH,{type:`monotone`,dataKey:e.key,stroke:e.color,strokeWidth:2,fill:`url(#grad-${e.key})`,dot:!1,activeDot:{r:3}},e.key)),l.map(e=>(0,G.jsx)(rV,{y:e.rop,stroke:e.color,strokeDasharray:`4 3`,strokeOpacity:.6},`rop-${e.key}`))]})})]})}function r1e({value:e,onSave:t}){let{t:n}=U(),[r,i]=(0,y.useState)(!1),[a,o]=(0,y.useState)(String(e));function s(){let e=parseInt(a,10);isNaN(e)||e<0||(t(e),i(!1))}return(0,G.jsxs)(`div`,{className:`flex items-center gap-2 px-3 py-1.5 bg-bambu-dark-tertiary/40 rounded-lg border border-bambu-dark-tertiary text-xs text-bambu-gray`,children:[(0,G.jsx)(Uc,{className:`w-3.5 h-3.5 flex-shrink-0`,"aria-label":n(`forecast.globalLeadTimeHint`)}),(0,G.jsxs)(`span`,{className:`hidden sm:inline`,children:[n(`forecast.globalLeadTime`),`:`]}),r?(0,G.jsxs)(`form`,{className:`flex items-center gap-1.5`,onSubmit:e=>{e.preventDefault(),s()},children:[(0,G.jsx)(`input`,{type:`number`,min:0,max:365,value:a,onChange:e=>o(e.target.value),className:`w-14 px-1.5 py-0.5 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-sm text-white focus:outline-none focus:border-bambu-green`,autoFocus:!0}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`d`}),(0,G.jsx)(`button`,{type:`submit`,className:`px-2 py-0.5 bg-bambu-green text-white text-xs rounded hover:bg-bambu-green/80`,children:n(`forecast.save`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>i(!1),className:`text-xs text-bambu-gray hover:text-white`,children:`✕`})]}):(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsxs)(`span`,{className:`font-semibold text-white`,children:[e,`d`]}),(0,G.jsx)(`button`,{onClick:()=>{o(String(e)),i(!0)},className:`p-0.5 text-bambu-gray hover:text-white rounded transition-colors`,children:(0,G.jsx)(Ol,{className:`w-3 h-3`})})]})]})}function i1e({forecast:e,globalLeadTime:t,canWrite:n,onSaved:r,onCart:i,showToast:a}){let{t:o}=U(),[s,c]=(0,y.useState)(!1),[l,u]=(0,y.useState)(!1),[d,f]=(0,y.useState)(!1),[p,m]=(0,y.useState)(String(e.settings?.lead_time_days??0)),[h,g]=(0,y.useState)(String(e.settings?.safety_margin_value??14)),[_,v]=(0,y.useState)(e.settings?.safety_margin_unit??`days`);(0,y.useEffect)(()=>{l||m(String(e.settings?.lead_time_days??0))},[e.settings?.lead_time_days,l]),(0,y.useEffect)(()=>{d||(g(String(e.settings?.safety_margin_value??14)),v(e.settings?.safety_margin_unit??`days`))},[e.settings?.safety_margin_value,e.settings?.safety_margin_unit,d]);let b=q({mutationFn:Z.upsertSkuSettings,onSuccess:()=>{r(),a(o(`forecast.settingsSaved`),`success`)},onError:()=>a(o(`forecast.failedSaveSettings`),`error`)}),x=e.settings?.alerts_snoozed??!1,S=[e.group.brand,e.group.material,e.group.subtype,e.group.colorName].filter(Boolean).join(` `),C=e.group.spools[0]?.rgba?kf(e.group.spools[0].rgba):{backgroundColor:`#4B5563`},w=e.totalLabelG>0?Math.round(e.totalRemainingG/e.totalLabelG*100):0,T=x||e.daysRemaining===null?`text-bambu-gray`:e.stockBreakAlert?`text-red-700 dark:text-red-400`:e.reorderAlert||e.daysRemaining<30?`text-yellow-700 dark:text-yellow-400`:`text-green-700 dark:text-green-400`;function E(t,n,r,i=x){b.mutate({material:e.group.material,subtype:e.group.subtype,brand:e.group.brand,color_name:e.group.colorName,lead_time_days:t,safety_margin_value:n,safety_margin_unit:r,alerts_snoozed:i})}function D(t){t.stopPropagation(),E(e.settings?.lead_time_days??0,e.settings?.safety_margin_value??14,e.settings?.safety_margin_unit??`days`,!x)}let O=e.rateTier===`history`?(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 text-xs px-1.5 py-0.5 rounded bg-bambu-green/15 text-bambu-green`,children:[(0,G.jsx)(`span`,{className:`w-1.5 h-1.5 rounded-full bg-bambu-green`}),o(`forecast.trend`)]}):e.rateTier===`delta`?(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 text-xs px-1.5 py-0.5 rounded bg-blue-100 dark:bg-blue-400/15 text-blue-700 dark:text-blue-400`,children:[(0,G.jsx)(`span`,{className:`w-1.5 h-1.5 rounded-full bg-blue-400`}),o(`forecast.estimated`)]}):(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 text-xs px-1.5 py-0.5 rounded bg-bambu-dark-tertiary text-bambu-gray/60`,children:[(0,G.jsx)(`span`,{className:`w-1.5 h-1.5 rounded-full bg-bambu-gray/40`}),o(`forecast.noData`)]});return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/50 cursor-pointer hover:bg-bambu-dark-tertiary/30 transition-colors ${x?``:e.stockBreakAlert?`bg-red-500/5`:e.reorderAlert?`bg-yellow-500/5`:``} ${x?`opacity-50`:``}`,onClick:()=>c(e=>!e),children:[(0,G.jsx)(`td`,{className:`px-4 py-3`,children:(0,G.jsx)(`span`,{className:`block w-5 h-5 rounded-full border border-black/20`,style:C})}),(0,G.jsx)(`td`,{className:`px-4 py-3`,children:(0,G.jsx)(`span`,{className:`text-sm text-white`,children:S})}),(0,G.jsx)(`td`,{className:`px-4 py-3`,children:(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.totalSpools})}),(0,G.jsx)(`td`,{className:`px-4 py-3 min-w-[140px]`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`div`,{className:`flex-1 h-2 bg-bambu-dark-tertiary rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full ${w>50?`bg-bambu-green`:w>20?`bg-yellow-500`:`bg-red-500`}`,style:{width:`${Math.min(w,100)}%`}})}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray min-w-[40px] text-right`,children:[Math.round(e.totalRemainingG),`g`]})]})}),(0,G.jsx)(`td`,{className:`px-4 py-3`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 flex-wrap`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:e.dailyRateG===null?`—`:`${e.dailyRateG.toFixed(1)}g/d`}),O]})}),(0,G.jsx)(`td`,{className:`px-4 py-3`,children:(0,G.jsx)(`span`,{className:`text-sm font-semibold ${T}`,children:e.daysRemaining===null?(0,G.jsx)(`span`,{className:`text-bambu-gray font-normal`,children:`—`}):`${e.daysRemaining}d`})}),(0,G.jsx)(`td`,{className:`px-4 py-3`,children:(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.projectedEmptyDate?l9(e.projectedEmptyDate):`—`})}),(0,G.jsx)(`td`,{className:`px-4 py-3`,children:(0,G.jsx)(`span`,{className:`text-sm ${!x&&e.reorderAlert?`text-yellow-700 dark:text-yellow-400`:`text-bambu-gray`}`,children:e.reorderTriggerDate?l9(e.reorderTriggerDate):`—`})}),(0,G.jsx)(`td`,{className:`px-4 py-3`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-1`,children:[n&&(0,G.jsx)(`button`,{onClick:i,className:`p-1.5 text-bambu-gray hover:text-bambu-green rounded transition-colors`,title:o(`forecast.addToCart`),children:(0,G.jsx)(su,{className:`w-4 h-4`})}),!x&&(e.stockBreakAlert?(0,G.jsx)(Iu,{className:`w-4 h-4 text-red-600 dark:text-red-400`,"aria-label":o(`forecast.stockBreakRisk`)}):e.reorderAlert?(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-600 dark:text-yellow-400`,"aria-label":o(`forecast.reorderNow`)}):e.daysRemaining===null?null:(0,G.jsx)(fs,{className:`w-4 h-4 text-bambu-green/50`})),n&&(0,G.jsx)(`button`,{onClick:D,className:`p-1 rounded transition-colors ${x?`text-amber-600/80 dark:text-amber-400/80 hover:text-amber-700 dark:hover:text-amber-300`:`text-slate-400 hover:text-white`}`,title:o(x?`forecast.alertsEnabled`:`forecast.alertsSnoozed`),children:(0,G.jsx)(Ko,{className:`w-3.5 h-3.5`})}),(0,G.jsx)(`button`,{onClick:e=>{e.stopPropagation(),c(e=>!e)},className:`p-1.5 text-bambu-gray hover:text-white rounded transition-colors`,children:s?(0,G.jsx)(gs,{className:`w-4 h-4`}):(0,G.jsx)(ps,{className:`w-4 h-4`})})]})})]}),s&&(0,G.jsx)(`tr`,{className:`bg-bambu-dark-tertiary/10`,children:(0,G.jsx)(`td`,{colSpan:9,className:`px-6 py-4`,children:(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`grid gap-2 ${n?`grid-cols-2 sm:grid-cols-4`:`grid-cols-2`}`,children:[(0,G.jsx)(a1e,{label:o(`forecast.effectiveLeadTime`),value:`${e.effectiveLeadTimeDays}d`,hint:o(`forecast.effectiveLeadTimeHint`,{global:t,sku:e.settings?.lead_time_days??0})}),(0,G.jsx)(a1e,{label:o(`forecast.reorderPoint`),value:`${Math.round(e.reorderPointG)}g`,hint:o(`forecast.reorderPointHint`)}),n&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(o1e,{label:o(`forecast.skuLeadTimeOverride`),hint:o(`forecast.skuLeadTimeHint`),unit:o(`forecast.leadTime`),editing:l,value:e.settings?.lead_time_days??0,inputValue:p,onInputChange:m,onEdit:()=>{m(String(e.settings?.lead_time_days??0)),u(!0)},onSave:()=>{let t=parseInt(p,10);!isNaN(t)&&t>=0&&(E(t,e.settings?.safety_margin_value??14,_),u(!1))},onCancel:()=>u(!1),isPending:b.isPending,saveLabel:o(`forecast.save`),cancelLabel:o(`forecast.cancel`)}),(0,G.jsx)(s1e,{value:e.settings?.safety_margin_value??14,unit:_,editing:d,inputValue:h,dailyRateG:e.dailyRateG,onInputChange:g,onUnitChange:e=>v(e),onEdit:()=>{g(String(e.settings?.safety_margin_value??14)),v(e.settings?.safety_margin_unit??`days`),f(!0)},onSave:()=>{let t=parseInt(h,10);!isNaN(t)&&t>=0&&(E(e.settings?.lead_time_days??0,t,_),f(!1))},onCancel:()=>f(!1),isPending:b.isPending,saveLabel:o(`forecast.save`),cancelLabel:o(`forecast.cancel`),safetyMarginLabel:o(`forecast.safetyMarginLabel`)})]})]}),e.group.spools.length>1&&(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary pt-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:o(`forecast.individualSpools`)}),(0,G.jsx)(`div`,{className:`bg-bambu-dark-secondary rounded-lg overflow-hidden border border-bambu-dark-tertiary`,children:(0,G.jsxs)(`table`,{className:`w-full`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary bg-bambu-dark-tertiary/30`,children:[(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:`#`}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:o(`inventory.remaining`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:o(`inventory.used`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:o(`forecast.labelWeight`)})]})}),(0,G.jsx)(`tbody`,{className:`divide-y divide-bambu-dark-tertiary`,children:e.group.spools.map(e=>{let t=Math.max(0,e.label_weight-e.weight_used),n=e.label_weight>0?t/e.label_weight*100:0;return(0,G.jsxs)(`tr`,{className:`hover:bg-bambu-dark-tertiary/30 transition-colors`,children:[(0,G.jsx)(`td`,{className:`px-4 py-2`,children:(0,G.jsxs)(`span`,{className:`text-xs font-mono text-bambu-gray/70`,children:[`#`,e.id]})}),(0,G.jsx)(`td`,{className:`px-4 py-2`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-24 h-1.5 bg-bambu-dark-tertiary rounded-full overflow-hidden flex-shrink-0`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full ${n>50?`bg-bambu-green`:n>20?`bg-yellow-500`:`bg-red-500`}`,style:{width:`${Math.min(n,100)}%`}})}),(0,G.jsxs)(`span`,{className:`text-sm text-white`,children:[Math.round(t),`g`]})]})}),(0,G.jsx)(`td`,{className:`px-4 py-2`,children:(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[Math.round(Math.max(0,e.weight_used-(e.weight_used_baseline??0))),`g`]})}),(0,G.jsx)(`td`,{className:`px-4 py-2`,children:(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[e.label_weight,`g`]})})]},e.id)})})]})})]})]})})})]})}function a1e({label:e,value:t,hint:n}){return(0,G.jsxs)(`div`,{className:`bg-bambu-dark-tertiary/40 rounded-lg p-3`,title:n,children:[(0,G.jsx)(`div`,{className:`text-xs font-medium text-white mb-1`,children:e}),(0,G.jsx)(`div`,{className:`text-lg font-semibold text-white`,children:t})]})}function o1e({label:e,hint:t,unit:n,editing:r,value:i,inputValue:a,onInputChange:o,onEdit:s,onSave:c,onCancel:l,isPending:u,saveLabel:d=`Save`,cancelLabel:f=`Cancel`}){return(0,G.jsxs)(`div`,{className:`bg-bambu-dark-tertiary/40 rounded-lg p-3 space-y-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(`span`,{className:`text-xs font-medium text-white`,children:e}),(0,G.jsx)(`span`,{title:t,children:(0,G.jsx)(Uc,{className:`w-3 h-3 text-bambu-gray/50`})})]}),r?(0,G.jsxs)(`form`,{className:`flex items-center gap-2`,onSubmit:e=>{e.preventDefault(),c()},children:[(0,G.jsx)(`input`,{type:`number`,min:0,max:365,value:a,onChange:e=>o(e.target.value),className:`w-20 px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-sm text-white focus:outline-none focus:border-bambu-green`,autoFocus:!0,disabled:u}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:n}),(0,G.jsx)(`button`,{type:`submit`,disabled:u,className:`px-2 py-1 bg-bambu-green text-white text-xs rounded hover:bg-bambu-green/80 disabled:opacity-50`,children:d}),(0,G.jsx)(`button`,{type:`button`,onClick:l,disabled:u,className:`px-2 py-1 text-xs text-bambu-gray hover:text-white`,children:f})]}):(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-lg font-semibold text-white`,children:i}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:n}),(0,G.jsx)(`button`,{onClick:s,className:`p-1 text-bambu-gray hover:text-white rounded transition-colors`,children:(0,G.jsx)(Ol,{className:`w-3 h-3`})})]})]})}function s1e({value:e,unit:t,editing:n,inputValue:r,dailyRateG:i,onInputChange:a,onUnitChange:o,onEdit:s,onSave:c,onCancel:l,isPending:u,saveLabel:d=`Save`,cancelLabel:f=`Cancel`,safetyMarginLabel:p=`Safety Margin`}){let{t:m}=U(),h=t===`g`?e:i===null?null:Math.round(i*e),g=t===`days`?m(`forecast.safetyMarginHintDays`,{approx:h===null?``:m(`forecast.safetyMarginHintDaysApprox`,{g:h})}):m(`forecast.safetyMarginHintG`,{approx:i===null?``:m(`forecast.safetyMarginHintGApprox`,{days:Math.round(e/i)})});return(0,G.jsxs)(`div`,{className:`bg-bambu-dark-tertiary/40 rounded-lg p-3 space-y-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(`span`,{className:`text-xs font-medium text-white`,children:p}),(0,G.jsx)(`span`,{title:g,children:(0,G.jsx)(Uc,{className:`w-3 h-3 text-bambu-gray/50`})})]}),n?(0,G.jsxs)(`form`,{className:`flex items-center gap-2 flex-wrap`,onSubmit:e=>{e.preventDefault(),c()},children:[(0,G.jsx)(`input`,{type:`number`,min:0,max:t===`g`?1e4:365,value:r,onChange:e=>a(e.target.value),className:`w-20 px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-sm text-white focus:outline-none focus:border-bambu-green`,autoFocus:!0,disabled:u}),(0,G.jsxs)(`div`,{className:`flex bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded overflow-hidden text-xs`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>o(`days`),className:`px-2 py-1 transition-colors ${t===`days`?`bg-bambu-green text-white`:`text-bambu-gray hover:text-white`}`,children:`days`}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>o(`g`),className:`px-2 py-1 transition-colors ${t===`g`?`bg-bambu-green text-white`:`text-bambu-gray hover:text-white`}`,children:`g`})]}),(0,G.jsx)(`button`,{type:`submit`,disabled:u,className:`px-2 py-1 bg-bambu-green text-white text-xs rounded hover:bg-bambu-green/80 disabled:opacity-50`,children:d}),(0,G.jsx)(`button`,{type:`button`,onClick:l,disabled:u,className:`px-2 py-1 text-xs text-bambu-gray hover:text-white`,children:f})]}):(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-lg font-semibold text-white`,children:e}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:t}),h!==null&&t===`days`&&(0,G.jsxs)(`span`,{className:`text-lg font-semibold text-white`,children:[`≈ `,h,`g`]}),t===`g`&&i!==null&&(0,G.jsxs)(`span`,{className:`text-lg font-semibold text-white`,children:[`≈ `,Math.round(e/i),`d`]}),(0,G.jsx)(`button`,{onClick:s,className:`p-1 text-bambu-gray hover:text-white rounded transition-colors`,children:(0,G.jsx)(Ol,{className:`w-3 h-3`})})]})]})}function c1e({items:e,forecasts:t,globalLeadTime:n,canWrite:r,onClose:i,onRemove:a,onClear:o}){let{t:s}=U(),c=co(),[l,u]=(0,y.useState)(`list`),d=q({mutationFn:async({id:e,status:t,item:n,avgSpoolG:r})=>{if(await Z.updateShoppingListStatus(e,t),t===`received`&&n){let t=r??1e3,i={material:n.material,subtype:n.subtype,brand:n.brand,label_weight:t,core_weight:0,core_weight_catalog_id:null,color_name:n.color_name,rgba:null,extra_colors:null,effect_type:null,nozzle_temp_min:null,nozzle_temp_max:null,note:n.note??null,tag_uid:null,tray_uuid:null,data_origin:`manual`,tag_type:null,cost_per_kg:null,last_scale_weight:null,last_weighed_at:null,weight_used:0,slicer_filament:null,slicer_filament_name:null,added_full:null,last_used:null,encode_time:null,category:`Stock`,low_stock_threshold_pct:null};await Z.bulkCreateSpools(i,n.quantity_spools),await Z.removeFromShoppingList(e)}},onSuccess:()=>{c.invalidateQueries({queryKey:[`shopping-list`]}),c.invalidateQueries({queryKey:[`spools`]})}}),f=(0,y.useMemo)(()=>{let e=new Map;for(let n of t)e.set(n.group.key,n);return e},[t]),p=(0,y.useMemo)(()=>e.map(e=>({item:e,forecast:f.get(s9(e.material,e.subtype,e.brand,e.color_name))??null})),[e,f]),m=(0,y.useMemo)(()=>p.filter(({forecast:e})=>!e||e.dailyRateG===null?!1:e.stockBreakAlert||e.daysRemaining!==null&&e.daysRemaining<=e.effectiveLeadTimeDays),[p]);function h(){let t=[s(`forecast.qty`),s(`forecast.material`),s(`inventory.brand`),s(`inventory.subtype`),s(`inventory.color`),`${s(`forecast.weight`)} (g)`,`${s(`forecast.leadTime`)} (d)`,s(`forecast.expectedRestock`),s(`forecast.status`),s(`forecast.note`)],r=e.map(e=>{let t=f.get(s9(e.material,e.subtype,e.brand,e.color_name))??null,r=t&&t.totalSpools>0?t.totalLabelG/t.totalSpools:1e3,i=Math.round(e.quantity_spools*r),a=t?.effectiveLeadTimeDays??n??0,o=a>0?l9(c9(new Date,a)):``;return[e.quantity_spools,e.material,e.brand??``,e.subtype??``,e.color_name??``,i,a||``,o,e.status,e.note??``].map(e=>`"${String(e).replace(/"/g,`""`)}"`).join(`,`)}),i=[t.join(`,`),...r].join(`
-`),a=new Blob([i],{type:`text/csv`}),o=URL.createObjectURL(a),c=document.createElement(`a`);c.href=o,c.download=`shopping-list-${new Date().toISOString().slice(0,10)}.csv`,c.click(),setTimeout(()=>URL.revokeObjectURL(o),100)}return(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg overflow-hidden border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-4 py-3 border-b border-bambu-dark-tertiary bg-bambu-dark-tertiary/30`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(su,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-white`,children:s(`forecast.shoppingList`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:s(`forecast.shoppingListItems`,{count:e.length})}),e.length>0&&(0,G.jsxs)(`div`,{className:`flex bg-bambu-dark-tertiary rounded-md p-0.5 ml-1`,children:[(0,G.jsxs)(`button`,{onClick:()=>u(`list`),className:`flex items-center gap-1.5 px-2 py-0.5 text-xs font-medium rounded transition-colors ${l===`list`?`bg-bambu-dark-secondary text-white shadow`:`text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(Sl,{className:`w-3 h-3`}),s(`forecast.listView`)]}),(0,G.jsxs)(`button`,{onClick:()=>u(`logistics`),className:`flex items-center gap-1.5 px-2 py-0.5 text-xs font-medium rounded transition-colors ${l===`logistics`?`bg-bambu-dark-secondary text-white shadow`:`text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(us,{className:`w-3 h-3`}),s(`forecast.logisticsView`),m.length>0&&(0,G.jsx)(`span`,{className:`w-3.5 h-3.5 rounded-full bg-red-500 text-white text-[9px] font-bold flex items-center justify-center`,children:m.length})]})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[e.length>0&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`button`,{onClick:h,className:`flex items-center gap-1.5 text-xs text-bambu-gray hover:text-white transition-colors px-2 py-1 rounded border border-bambu-dark-tertiary hover:bg-bambu-dark-tertiary`,children:[(0,G.jsx)(Ys,{className:`w-3 h-3`}),s(`forecast.downloadCsv`)]}),r&&(0,G.jsx)(`button`,{onClick:o,className:`text-xs text-red-700 dark:text-red-400 hover:text-red-800 dark:hover:text-red-300 transition-colors px-2 py-1 rounded border border-red-200 dark:border-red-500/20 hover:bg-red-50 dark:hover:bg-red-500/10`,children:s(`forecast.clearAll`)})]}),(0,G.jsx)(`button`,{onClick:i,className:`p-1 text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]})]}),e.length===0?(0,G.jsxs)(`div`,{className:`flex flex-col items-center py-8 text-bambu-gray`,children:[(0,G.jsx)(Sl,{className:`w-8 h-8 mb-2 opacity-30`}),(0,G.jsx)(`p`,{className:`text-sm`,children:s(`forecast.shoppingListEmpty`)})]}):l===`list`?(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary bg-bambu-dark-tertiary/20`,children:[(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:s(`forecast.qty`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:s(`forecast.material`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:s(`forecast.weight`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:s(`forecast.leadTime`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:s(`forecast.expectedRestock`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:s(`forecast.status`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:s(`forecast.note`)}),(0,G.jsx)(`th`,{className:`px-4 py-2 text-right text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:s(`forecast.actions`)})]})}),(0,G.jsx)(`tbody`,{className:`divide-y divide-bambu-dark-tertiary`,children:e.map(e=>{let t=[e.brand,e.material,e.subtype,e.color_name].filter(Boolean).join(` `),i=m.some(t=>t.item.id===e.id),o=f.get(s9(e.material,e.subtype,e.brand,e.color_name))??null,c=o&&o.totalSpools>0?o.totalLabelG/o.totalSpools:1e3,l=Math.round(e.quantity_spools*c),u=o?.effectiveLeadTimeDays??n??0,p=u>0?c9(new Date,u):null,h=e.status===`purchased`||e.status===`received`,g=e.status===`received`,_=d.isPending;return(0,G.jsxs)(`tr`,{className:`hover:bg-bambu-dark-tertiary/30 transition-colors ${i&&!h?`bg-red-500/5`:``}`,children:[(0,G.jsx)(`td`,{className:`px-4 py-2.5`,children:(0,G.jsxs)(`span`,{className:`text-sm font-semibold text-bambu-green`,children:[e.quantity_spools,`×`]})}),(0,G.jsx)(`td`,{className:`px-4 py-2.5`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:t}),i&&!h&&(0,G.jsx)(Iu,{className:`w-3.5 h-3.5 text-red-600 dark:text-red-400 flex-shrink-0`,"aria-label":s(`forecast.stockBreakBefore`)})]})}),(0,G.jsx)(`td`,{className:`px-4 py-2.5`,children:(0,G.jsx)(`span`,{className:`text-sm text-white`,children:l>=1e3?`${(l/1e3).toFixed(1)}kg`:`${l}g`})}),(0,G.jsx)(`td`,{className:`px-4 py-2.5`,children:(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:u>0?`${u}d`:`—`})}),(0,G.jsx)(`td`,{className:`px-4 py-2.5`,children:(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:p?l9(p):`—`})}),(0,G.jsx)(`td`,{className:`px-4 py-2.5`,children:(0,G.jsx)(`span`,{className:`inline-flex items-center px-2 py-0.5 rounded text-xs font-medium ${g?`bg-bambu-green/20 text-bambu-green`:h?`bg-blue-100 dark:bg-blue-400/20 text-blue-700 dark:text-blue-400`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:s(g?`forecast.received`:h?`forecast.purchased`:`forecast.pending`)})}),(0,G.jsx)(`td`,{className:`px-4 py-2.5`,children:(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:e.note||`—`})}),(0,G.jsx)(`td`,{className:`px-4 py-2.5`,children:(0,G.jsx)(`div`,{className:`flex items-center justify-end gap-1`,children:r&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`button`,{onClick:()=>d.mutate({id:e.id,status:h?`pending`:`purchased`}),disabled:_||g,title:s(h?`forecast.resetToPending`:`forecast.markPurchased`),className:`p-1.5 rounded transition-colors disabled:opacity-30 ${h?`text-blue-600 dark:text-blue-400 hover:text-blue-700 dark:hover:text-blue-300`:`text-blue-600/50 dark:text-blue-400/50 hover:text-blue-600 dark:hover:text-blue-400`}`,children:h?(0,G.jsx)(Ul,{className:`w-4 h-4`}):(0,G.jsx)(eee,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>d.mutate({id:e.id,status:`received`,item:e,avgSpoolG:c}),disabled:_||!h||g,title:s(`forecast.markReceived`),className:`p-1.5 rounded transition-colors text-bambu-green/50 hover:text-bambu-green disabled:opacity-30`,children:(0,G.jsx)(bl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>a(e.id),className:`p-1 text-bambu-gray hover:text-red-600 dark:hover:text-red-400 transition-colors`,title:s(`forecast.remove`),children:(0,G.jsx)(Nu,{className:`w-3.5 h-3.5`})})]})})})]},e.id)})})]})}):(0,G.jsx)(`div`,{className:`divide-y divide-bambu-dark-tertiary`,children:p.filter(({item:e})=>e.status!==`received`).map(({item:e,forecast:t})=>(0,G.jsx)(l1e,{item:e,forecast:t,globalLeadTime:n,canWrite:r,onRemove:()=>a(e.id)},e.id))})]})}function l1e({item:e,forecast:t,globalLeadTime:n,canWrite:r,onRemove:i}){let{t:a}=U(),o=[e.brand,e.material,e.subtype,e.color_name].filter(Boolean).join(` `),s=(0,y.useMemo)(()=>{if(!t||t.dailyRateG===null||t.dailyRateG<=0)return null;let n=t.dailyRateG,r=t.effectiveLeadTimeDays,i=t.totalSpools>0?t.totalLabelG/t.totalSpools:1e3,a=e.quantity_spools*i,o=Math.max(0,t.totalRemainingG-n*r),s=o+a,c=Math.ceil(s/n),l=Math.min(r+c+5,365),u=[];for(let e=0;e<=l;e++){let i=u9(c9(new Date,e));if(e===r)u.push({day:e,label:i,stock:Math.round(o),rop:Math.round(t.reorderPointG),safetyStock:Math.round(t.safetyStockG)}),u.push({day:e,label:i,stock:Math.round(s),rop:Math.round(t.reorderPointG),safetyStock:Math.round(t.safetyStockG),arrival:!0});else{let a=e<r?Math.max(0,t.totalRemainingG-n*e):Math.max(0,s-n*(e-r));u.push({day:e,label:i,stock:Math.round(a),rop:Math.round(t.reorderPointG),safetyStock:Math.round(t.safetyStockG)})}}return{points:u,lt:r,maxDays:l,arrivalG:a,peakG:s,stockAtArrival:o}},[t,e.quantity_spools]),c=(0,y.useMemo)(()=>{if(!t||t.dailyRateG===null||t.dailyRateG<=0)return null;let e=Math.floor(t.totalRemainingG/t.dailyRateG);return e<t.effectiveLeadTimeDays?e:null},[t]),l=c!==null;return(0,G.jsxs)(`div`,{className:`px-4 py-4 ${l?`bg-red-500/5`:``}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 min-w-0`,children:[l?(0,G.jsx)(Iu,{className:`w-4 h-4 text-red-600 dark:text-red-400 flex-shrink-0`}):(0,G.jsx)(fs,{className:`w-4 h-4 text-bambu-green/60 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm font-medium text-white truncate`,children:o}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray flex-shrink-0`,children:[a(`forecast.spoolCount`,{count:e.quantity_spools}),` ordered`]})]}),r&&(0,G.jsx)(`button`,{onClick:i,className:`p-1 text-bambu-gray hover:text-red-600 dark:hover:text-red-400 transition-colors flex-shrink-0`,children:(0,G.jsx)(Nu,{className:`w-3.5 h-3.5`})})]}),l&&(0,G.jsxs)(`div`,{className:`mb-3 px-3 py-2 rounded-lg bg-red-50 dark:bg-red-500/10 border border-red-200 dark:border-red-500/20 text-xs text-red-700 dark:text-red-300`,children:[(0,G.jsx)(`span`,{className:`font-medium`,children:a(`forecast.stockBreakIn`,{days:c})}),` `,a(`forecast.stockRunsOutBefore`,{lt:t.effectiveLeadTimeDays}),t.dailyRateG!==null&&(0,G.jsxs)(`span`,{children:[` `,a(`forecast.atRate`,{rate:t.dailyRateG.toFixed(1)}),` `,(0,G.jsx)(`span`,{className:`font-semibold`,children:a(`forecast.moreSpools`,{count:Math.ceil((t.dailyRateG*t.effectiveLeadTimeDays-t.totalRemainingG)/(t.totalLabelG/(t.totalSpools||1)||1e3))})}),` `,a(`forecast.bridgeGap`)]})]}),!t||t.dailyRateG===null?(0,G.jsx)(`div`,{className:`py-4 text-center text-xs text-bambu-gray`,children:a(`forecast.noUsageData`)}):s?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-5 gap-2 mb-3`,children:[(0,G.jsxs)(`div`,{className:`bg-bambu-dark-tertiary/40 rounded-lg px-2.5 py-2 text-center`,children:[(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mb-0.5`,children:a(`forecast.stock`)}),(0,G.jsxs)(`div`,{className:`text-sm font-semibold text-white`,children:[Math.round(t.totalRemainingG),`g`]})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark-tertiary/40 rounded-lg px-2.5 py-2 text-center`,children:[(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mb-0.5`,children:a(`forecast.leadTime`)}),(0,G.jsxs)(`div`,{className:`text-sm font-semibold text-white`,children:[t.effectiveLeadTimeDays,`d`]}),(0,G.jsxs)(`div`,{className:`text-[10px] text-bambu-gray/60`,children:[`max(g:`,n,`, sku:`,t.settings?.lead_time_days??0,`)`]})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark-tertiary/40 rounded-lg px-2.5 py-2 text-center`,children:[(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mb-0.5`,children:a(`forecast.safetyMarginLabel`)}),(0,G.jsxs)(`div`,{className:`text-sm font-semibold text-white`,children:[Math.round(t.safetyStockG),`g`]})]}),(0,G.jsxs)(`div`,{className:`rounded-lg px-2.5 py-2 text-center ${l?`bg-red-100 dark:bg-red-500/15`:`bg-bambu-dark-tertiary/40`}`,children:[(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mb-0.5`,children:a(`forecast.daysLeft`)}),(0,G.jsxs)(`div`,{className:`text-sm font-semibold ${l?`text-red-700 dark:text-red-400`:`text-green-700 dark:text-green-400`}`,children:[t.daysRemaining??`—`,`d`]})]}),s&&(0,G.jsxs)(`div`,{className:`bg-bambu-green/15 rounded-lg px-2.5 py-2 text-center`,children:[(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mb-0.5`,children:a(`forecast.onArrival`)}),(0,G.jsxs)(`div`,{className:`text-sm font-semibold text-bambu-green`,children:[Math.round(s.arrivalG),`g`]}),(0,G.jsxs)(`div`,{className:`text-[10px] text-bambu-gray/60`,children:[`+`,a(`forecast.spoolCount`,{count:e.quantity_spools})]})]})]}),(0,G.jsx)(lA,{width:`100%`,height:180,children:(0,G.jsxs)(pU,{data:s.points,margin:{top:8,right:8,bottom:0,left:0},children:[(0,G.jsxs)(`defs`,{children:[(0,G.jsxs)(`linearGradient`,{id:`cart-pre-${e.id}`,x1:`0`,y1:`0`,x2:`0`,y2:`1`,children:[(0,G.jsx)(`stop`,{offset:`5%`,stopColor:l?`#EF4444`:`#1DB954`,stopOpacity:.25}),(0,G.jsx)(`stop`,{offset:`95%`,stopColor:l?`#EF4444`:`#1DB954`,stopOpacity:.02})]}),(0,G.jsxs)(`linearGradient`,{id:`cart-post-${e.id}`,x1:`0`,y1:`0`,x2:`0`,y2:`1`,children:[(0,G.jsx)(`stop`,{offset:`5%`,stopColor:`#1DB954`,stopOpacity:.3}),(0,G.jsx)(`stop`,{offset:`95%`,stopColor:`#1DB954`,stopOpacity:.03})]})]}),(0,G.jsx)(yV,{strokeDasharray:`3 3`,stroke:`#374151`,strokeOpacity:.4}),(0,G.jsx)(CH,{dataKey:`label`,tick:{fill:`#6B7280`,fontSize:9},interval:Math.max(0,Math.ceil(s.maxDays/6)-1),axisLine:!1,tickLine:!1}),(0,G.jsx)(OH,{tick:{fill:`#6B7280`,fontSize:9},axisLine:!1,tickLine:!1,tickFormatter:e=>e>=1e3?`${(e/1e3).toFixed(1)}kg`:`${e}g`,width:44}),(0,G.jsx)(tz,{contentStyle:{background:`#1a1a2e`,border:`1px solid #374151`,borderRadius:8,fontSize:11},labelStyle:{color:`#9CA3AF`},formatter:(e,t)=>typeof e==`number`?t===`stock`?`${e}g — ${a(`forecast.stock`)}`:t===`rop`?`${e}g — ${a(`forecast.reorderPoint`)}`:t===`safetyStock`?`${e}g — ${a(`forecast.safetyMarginLabel`)}`:`${e}`:``}),(0,G.jsx)(tH,{type:`linear`,dataKey:`stock`,stroke:`#1DB954`,strokeWidth:2,fill:`url(#cart-post-${e.id})`,dot:!1,activeDot:{r:3}}),t.reorderPointG>0&&(0,G.jsx)(rV,{y:t.reorderPointG,stroke:`#F59E0B`,strokeDasharray:`5 3`,strokeOpacity:.8,label:{value:`ROP`,position:`insideTopRight`,fill:`#F59E0B`,fontSize:9}}),t.safetyStockG>0&&(0,G.jsx)(rV,{y:t.safetyStockG,stroke:`#6B7280`,strokeDasharray:`3 3`,strokeOpacity:.6,label:{value:`SS`,position:`insideTopRight`,fill:`#6B7280`,fontSize:9}}),(0,G.jsx)(rV,{x:u9(c9(new Date,s.lt)),stroke:`#3B82F6`,strokeWidth:1.5,strokeDasharray:`4 3`,strokeOpacity:.9,label:{value:`+${s.arrivalG>=1e3?`${(s.arrivalG/1e3).toFixed(1)}kg`:`${Math.round(s.arrivalG)}g`} arrives (d${s.lt})`,position:`insideTopLeft`,fill:`#3B82F6`,fontSize:9}}),c!==null&&(0,G.jsx)(rV,{x:u9(c9(new Date,c)),stroke:`#EF4444`,strokeWidth:1.5,strokeOpacity:.9,label:{value:`OUT`,position:`insideTopLeft`,fill:`#EF4444`,fontSize:9}})]})}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-3 mt-2 text-[10px] text-bambu-gray`,children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`span`,{className:`inline-block w-4 border-t-2 border-yellow-400 border-dashed`}),` `,a(`forecast.ropLabel`)]}),(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`span`,{className:`inline-block w-4 border-t border-bambu-gray border-dashed`}),` `,a(`forecast.safetyStockLegend`)]}),(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`span`,{className:`inline-block w-4 border-t-2 border-blue-400 border-dashed`}),` `,a(`forecast.stockArrivalLegend`)]}),l&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-red-700 dark:text-red-400`,children:[(0,G.jsx)(`span`,{className:`inline-block w-4 border-t-2 border-red-400`}),` `,a(`forecast.stockoutLegend`)]})]})]}):null]})}function u1e({forecast:e,onClose:t,onAdd:n}){let{t:r}=U(),i=[e.group.brand,e.group.material,e.group.subtype,e.group.colorName].filter(Boolean).join(` `),[a,o]=(0,y.useState)(`qty`),[s,c]=(0,y.useState)(`1`),[l,u]=(0,y.useState)(`30`),[d,f]=(0,y.useState)(``),p=(0,y.useMemo)(()=>{if(!e.dailyRateG||e.dailyRateG<=0)return null;let t=e.dailyRateG*Number(l),n=e.group.spools.length>0?e.group.spools.reduce((e,t)=>e+t.label_weight,0)/e.group.spools.length:1e3;return Math.ceil(t/n)},[e,l]),m=a===`qty`?parseInt(s,10)||1:p??1;function h(t){t.preventDefault(),n({material:e.group.material,subtype:e.group.subtype,brand:e.group.brand,color_name:e.group.colorName,quantity_spools:m,note:d||null})}return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/60 backdrop-blur-sm p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-2xl border border-bambu-dark-tertiary w-full max-w-sm shadow-2xl`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-5 pt-5 pb-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(su,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-base font-semibold text-white`,children:r(`forecast.addToCartTitle`)})]}),(0,G.jsx)(`button`,{onClick:t,className:`p-1 text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`form`,{onSubmit:h,className:`p-5 space-y-4`,children:[(0,G.jsx)(`div`,{className:`text-sm text-bambu-gray`,children:i}),(0,G.jsxs)(`div`,{className:`flex bg-bambu-dark-tertiary rounded-lg p-0.5`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>o(`qty`),className:`flex-1 py-1.5 text-xs font-medium rounded-md transition-colors ${a===`qty`?`bg-bambu-dark-secondary text-white shadow`:`text-bambu-gray hover:text-white`}`,children:r(`forecast.byQuantity`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>o(`duration`),className:`flex-1 py-1.5 text-xs font-medium rounded-md transition-colors ${a===`duration`?`bg-bambu-dark-secondary text-white shadow`:`text-bambu-gray hover:text-white`}`,children:r(`forecast.byDuration`)})]}),a===`qty`?(0,G.jsxs)(`div`,{className:`space-y-1.5`,children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray`,children:r(`forecast.numberOfSpools`)}),(0,G.jsx)(`input`,{type:`number`,min:1,max:99,value:s,onChange:e=>c(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`,autoFocus:!0})]}):(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`space-y-1.5`,children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray`,children:r(`forecast.lastHowManyDays`)}),(0,G.jsx)(`input`,{type:`number`,min:1,max:365,value:l,onChange:e=>u(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`,autoFocus:!0})]}),e.dailyRateG===null?(0,G.jsx)(`div`,{className:`text-xs text-yellow-700 dark:text-yellow-400 px-1`,children:r(`forecast.noUsageQty`)}):(0,G.jsxs)(`div`,{className:`flex items-center gap-2 px-3 py-2 bg-bambu-dark-tertiary/50 rounded-lg`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`≈`}),(0,G.jsx)(`span`,{className:`text-sm font-semibold text-bambu-green`,children:r(`forecast.spoolCount`,{count:p??0})}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[`at `,e.dailyRateG.toFixed(1),`g/day`]})]})]}),(0,G.jsxs)(`div`,{className:`space-y-1.5`,children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray`,children:r(`forecast.noteOptional`)}),(0,G.jsx)(`input`,{type:`text`,maxLength:200,value:d,onChange:e=>f(e.target.value),placeholder:r(`forecast.notePlaceholder`),className:`w-full px-3 py-2 bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/40 focus:outline-none focus:border-bambu-green`})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3 pt-1`,children:[(0,G.jsx)(`button`,{type:`submit`,className:`flex-1 py-2 bg-bambu-green text-white text-sm font-medium rounded-lg hover:bg-bambu-green/80 transition-colors`,children:r(`forecast.addNSpools`,{count:m})}),(0,G.jsx)(`button`,{type:`button`,onClick:t,className:`px-4 py-2 text-sm text-bambu-gray hover:text-white border border-bambu-dark-tertiary rounded-lg transition-colors`,children:r(`forecast.cancel`)})]})]})]})})}var f9={material:``,subtype:``,brand:``,color_name:``,rgba:`808080FF`,extra_colors:``,effect_type:``,label_weight:1e3,core_weight:250,core_weight_catalog_id:null,weight_used:0,slicer_filament:``,note:``,cost_per_kg:null,category:``,low_stock_threshold_pct:null,location_id:null,spoolman_filament_id:null},d1e=new Set([`material`,`subtype`,`brand`,`rgba`,`color_name`,`label_weight`]);function f1e(e,t=!1,n=!1,r=`create`){let i={};return t||n||r!==`create`?(!e.material&&!e.spoolman_filament_id&&(i.material=`Material is required`),{isValid:Object.keys(i).length===0,errors:i}):(e.slicer_filament||(i.slicer_filament=`Slicer preset is required`),e.material||(i.material=`Material is required`),e.brand||(i.brand=`Brand is required`),e.subtype||(i.subtype=`Subtype is required`),{isValid:Object.keys(i).length===0,errors:i})}var p1e={local:`bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-400`,orca_cloud:`bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-400`,cloud:`bg-bambu-blue/20 text-bambu-blue`,builtin:`bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400`};function p9({source:e}){let{t}=U(),n={local:t(`profiles.localProfiles.badge`),orca_cloud:t(`configureAmsSlot.orcaCloud`),cloud:t(`configureAmsSlot.bambuCloud`),builtin:t(`configureAmsSlot.builtin`)}[e];return(0,G.jsx)(`span`,{className:`text-[10px] px-1.5 py-0.5 rounded whitespace-nowrap ${p1e[e]}`,children:n})}function m1e({value:e,options:t,inheritLabel:n,onChange:r,disabled:i=!1,ariaLabel:a}){let{t:o}=U(),[s,c]=(0,y.useState)(!1),[l,u]=(0,y.useState)(``),d=(0,y.useRef)(null),f=t.find(t=>t.code===e);(0,y.useEffect)(()=>{if(!s)return;let e=e=>{d.current&&!d.current.contains(e.target)&&c(!1)},t=e=>{e.key===`Escape`&&(e.stopPropagation(),c(!1))};return document.addEventListener(`mousedown`,e),document.addEventListener(`keydown`,t,!0),()=>{document.removeEventListener(`mousedown`,e),document.removeEventListener(`keydown`,t,!0)}},[s]);let p=l.trim().toLowerCase(),m=p?t.filter(e=>e.displayName.toLowerCase().includes(p)):t,h=e=>{r(e),c(!1),u(``)};return(0,G.jsxs)(`div`,{className:`relative`,ref:d,children:[(0,G.jsxs)(`button`,{type:`button`,"aria-label":a,"aria-haspopup":`listbox`,"aria-expanded":s,disabled:i,onClick:()=>c(e=>!e),className:`w-full flex items-center gap-2 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-sm text-left focus:outline-none focus:border-bambu-green disabled:opacity-50`,children:[(0,G.jsx)(`span`,{className:`flex-1 min-w-0 truncate ${f?`text-white`:`text-bambu-gray italic`}`,children:f?f.displayName:n}),f&&(0,G.jsx)(p9,{source:f.source}),(0,G.jsx)(ps,{className:`w-3.5 h-3.5 text-bambu-gray shrink-0`})]}),s&&(0,G.jsxs)(`div`,{className:`absolute z-50 mt-1 w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl`,children:[(0,G.jsx)(`div`,{className:`p-2 border-b border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`w-3.5 h-3.5 text-bambu-gray absolute left-2 top-1/2 -translate-y-1/2`}),(0,G.jsx)(`input`,{autoFocus:!0,type:`text`,value:l,onChange:e=>u(e.target.value),placeholder:o(`inventory.searchPresets`),className:`w-full pl-7 pr-7 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded-md text-sm text-white placeholder:text-bambu-gray/60 focus:outline-none focus:border-bambu-green`}),l&&(0,G.jsx)(`button`,{type:`button`,"aria-label":o(`common.clear`),onClick:()=>u(``),className:`absolute right-2 top-1/2 -translate-y-1/2 text-bambu-gray hover:text-white`,children:(0,G.jsx)(td,{className:`w-3.5 h-3.5`})})]})}),(0,G.jsxs)(`div`,{className:`max-h-56 overflow-y-auto p-1`,role:`listbox`,"aria-label":a,children:[(0,G.jsx)(`button`,{type:`button`,role:`option`,"aria-selected":!f,onClick:()=>h(null),className:`w-full text-left px-2 py-1.5 rounded-md text-sm italic ${f?`text-bambu-gray hover:bg-bambu-dark`:`bg-bambu-green/15 text-bambu-green`}`,children:n}),m.length===0?(0,G.jsx)(`p`,{className:`px-2 py-2 text-sm text-bambu-gray`,children:o(`inventory.noResults`)}):m.map(t=>(0,G.jsxs)(`button`,{type:`button`,role:`option`,"aria-selected":t.code===e,onClick:()=>h(t),className:`w-full flex items-center gap-2 text-left px-2 py-1.5 rounded-md text-sm ${t.code===e?`bg-bambu-green/15 text-bambu-green`:`text-white hover:bg-bambu-dark`}`,children:[(0,G.jsx)(`span`,{className:`flex-1 min-w-0 truncate`,title:t.displayName,children:t.displayName}),(0,G.jsx)(p9,{source:t.source})]},t.code))]})]})]})}function h1e(e,t){if(t.length===0)return{top:[],rest:e};let n=new Set(t.map(e=>e.toLowerCase()));return{top:e.filter(e=>n.has(e.toLowerCase())),rest:e.filter(e=>!n.has(e.toLowerCase()))}}function m9({label:e}){return(0,G.jsx)(`div`,{className:`px-3 py-1 text-[11px] font-semibold uppercase tracking-wide text-bambu-gray/70 bg-bambu-dark-tertiary/40`,children:e})}function g1e({formData:e,updateField:t,cloudAuthenticated:n,loadingCloudPresets:r,presetInputValue:i,setPresetInputValue:a,selectedPresetOption:o,filamentOptions:s,availableBrands:c,availableMaterials:l,suggestedBrands:u,suggestedMaterials:d,quickAdd:f,detailsRequired:p,quantity:m,onQuantityChange:h,errors:g}){let{t:_}=U(),[v,b]=(0,y.useState)(!1),[x,S]=(0,y.useState)(!1),[C,w]=(0,y.useState)(!1),[T,E]=(0,y.useState)(!1),[D,O]=(0,y.useState)(``),[k,A]=(0,y.useState)(``),[j,M]=(0,y.useState)(``),[N,P]=(0,y.useState)(String(e.label_weight)),[F,I]=(0,y.useState)(!1),[L,R]=(0,y.useState)(new Set),z=(0,y.useRef)(null),B=(0,y.useRef)(null),V=(0,y.useRef)(null),ee=(0,y.useRef)(null);(0,y.useEffect)(()=>{let e=e=>{z.current&&!z.current.contains(e.target)&&b(!1),ee.current&&!ee.current.contains(e.target)&&E(!1),B.current&&!B.current.contains(e.target)&&S(!1),V.current&&!V.current.contains(e.target)&&w(!1)};return document.addEventListener(`mousedown`,e),()=>document.removeEventListener(`mousedown`,e)},[]);let te=(0,y.useMemo)(()=>{if(!i)return s;let e=i.toLowerCase();return s.filter(t=>t.displayName.toLowerCase().includes(e)||t.code.toLowerCase().includes(e))},[s,i]),ne=(0,y.useMemo)(()=>{if(!D)return c;let e=D.toLowerCase();return c.filter(t=>t.toLowerCase().includes(e)).sort((t,n)=>{let r=t.toLowerCase()===e,i=n.toLowerCase()===e;return r&&!i?-1:!r&&i?1:t.localeCompare(n)})},[c,D]),re=(0,y.useMemo)(()=>{if(!k)return VU;let e=k.toLowerCase();return VU.filter(t=>t.toLowerCase().includes(e))},[k]),ie=(0,y.useMemo)(()=>{if(!j)return l;let e=j.toLowerCase();return l.filter(t=>t.toLowerCase().includes(e)).sort((t,n)=>{let r=t.toLowerCase()===e,i=n.toLowerCase()===e;return r&&!i?-1:!r&&i?1:t.localeCompare(n)})},[j,l]),ae=(0,y.useMemo)(()=>h1e(ne,u),[ne,u]),oe=(0,y.useMemo)(()=>h1e(ie,d),[ie,d]);(0,y.useEffect)(()=>{F||P(String(e.label_weight))},[e.label_weight,F]);let se=n=>{t(`slicer_filament`,n.code),a(n.displayName),b(!1);let r=qU(n.name),i=new Set,o=[[`material`,r.material],[`brand`,r.brand],[`subtype`,r.variant]];for(let[n,r]of o)r&&(e[n]&&!L.has(n)||(t(n,r),i.add(n)));R(i)},H=(e,n)=>{L.has(e)&&R(t=>{let n=new Set(t);return n.delete(e),n}),t(e,n)},ce=t=>(0,G.jsx)(`button`,{type:`button`,className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary ${e.brand===t?`bg-bambu-green/10 text-bambu-green`:`text-white`}`,onClick:()=>{H(`brand`,t),S(!1),O(``)},children:t},t),le=t=>(0,G.jsx)(`button`,{type:`button`,className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary ${e.material===t?`bg-bambu-green/10 text-bambu-green`:`text-white`}`,onClick:()=>{H(`material`,t),E(!1),M(``)},children:t},t);return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[!f&&(0,G.jsx)(`div`,{className:`flex items-center gap-2 text-xs text-bambu-gray`,children:r?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-3 h-3 animate-spin`}),` `,_(`inventory.loadingPresets`)]}):n?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ps,{className:`w-3 h-3 text-bambu-green`}),` `,_(`inventory.cloudConnected`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ms,{className:`w-3 h-3`}),` `,_(`inventory.cloudNotConnected`)]})}),!f&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:[_(`inventory.slicerPreset`),p&&` *`]}),(0,G.jsxs)(`div`,{className:`relative`,ref:z,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray/50 pointer-events-none`}),(0,G.jsx)(`input`,{type:`text`,className:`w-full pl-9 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`,placeholder:_(`inventory.searchPresets`),value:i,onChange:e=>{a(e.target.value),b(!0)},onFocus:()=>{b(!0),a(``)}}),v&&(0,G.jsx)(`div`,{className:`absolute z-50 w-full mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg max-h-64 overflow-y-auto`,children:te.length===0?(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:_(`inventory.noPresetsFound`)}):te.map(e=>(0,G.jsxs)(`button`,{type:`button`,className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex items-center gap-2 ${o?.code===e.code?`bg-bambu-green/10 text-bambu-green`:`text-white`}`,onClick:()=>se(e),children:[(0,G.jsx)(`span`,{className:`flex-1 min-w-0 truncate`,title:e.displayName,children:e.displayName}),(0,G.jsx)(p9,{source:e.source})]},`${e.code}::${e.name}`))})]}),o&&(0,G.jsxs)(`div`,{className:`mt-1 text-xs text-bambu-gray`,children:[_(`inventory.selectedPreset`),`: `,(0,G.jsx)(`span`,{className:`font-mono text-bambu-green`,children:o.code})]}),g?.slicer_filament&&(0,G.jsx)(`p`,{className:`mt-1 text-xs text-red-700 dark:text-red-400`,children:g.slicer_filament})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:[_(`inventory.material`),` *`]}),(0,G.jsxs)(`div`,{className:`relative`,ref:ee,children:[(0,G.jsx)(`input`,{type:`text`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`,placeholder:_(`inventory.selectMaterial`),value:T?j:e.material,onChange:e=>{M(e.target.value),E(!0)},onFocus:()=>{E(!0),M(``)}}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray/50 pointer-events-none`}),T&&(0,G.jsxs)(`div`,{className:`absolute z-50 w-full mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg max-h-48 overflow-y-auto`,children:[ie.length===0?(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:_(`inventory.noResults`)}):(0,G.jsxs)(G.Fragment,{children:[oe.top.length>0&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(m9,{label:_(`inventory.suggestedOptions`)}),oe.top.map(le)]}),oe.rest.length>0&&(0,G.jsxs)(G.Fragment,{children:[oe.top.length>0&&(0,G.jsx)(m9,{label:_(`inventory.allOptions`)}),oe.rest.map(le)]})]}),j&&!ie.includes(j)&&(0,G.jsx)(`button`,{type:`button`,className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary text-bambu-green border-t border-bambu-dark-tertiary`,onClick:()=>{H(`material`,j),E(!1),M(``)},children:_(`inventory.useCustomMaterial`,{material:j})})]})]}),g?.material&&(0,G.jsx)(`p`,{className:`mt-1 text-xs text-red-700 dark:text-red-400`,children:g.material})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:[_(`inventory.brand`),p&&` *`]}),(0,G.jsxs)(`div`,{className:`relative`,ref:B,children:[(0,G.jsx)(`input`,{type:`text`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`,placeholder:_(`inventory.searchBrand`),value:x?D:e.brand,onChange:e=>{O(e.target.value),S(!0)},onFocus:()=>{S(!0),O(``)}}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray/50 pointer-events-none`}),x&&(0,G.jsxs)(`div`,{className:`absolute z-50 w-full mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg max-h-48 overflow-y-auto`,children:[ne.length===0?(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:_(`inventory.noResults`)}):(0,G.jsxs)(G.Fragment,{children:[ae.top.length>0&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(m9,{label:_(`inventory.suggestedOptions`)}),ae.top.map(ce)]}),ae.rest.length>0&&(0,G.jsxs)(G.Fragment,{children:[ae.top.length>0&&(0,G.jsx)(m9,{label:_(`inventory.allOptions`)}),ae.rest.map(ce)]})]}),D&&!ne.includes(D)&&(0,G.jsx)(`button`,{type:`button`,className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary text-bambu-green border-t border-bambu-dark-tertiary`,onClick:()=>{H(`brand`,D),S(!1),O(``)},children:_(`inventory.useCustomBrand`,{brand:D})})]})]}),g?.brand&&(0,G.jsx)(`p`,{className:`mt-1 text-xs text-red-700 dark:text-red-400`,children:g.brand})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:[_(`inventory.subtype`),p&&` *`]}),(0,G.jsxs)(`div`,{className:`relative`,ref:V,children:[(0,G.jsx)(`input`,{type:`text`,value:C?k:e.subtype,onChange:e=>{A(e.target.value),w(!0)},onFocus:()=>{w(!0),A(``)},placeholder:`Basic, Matte, Silk...`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray/50 pointer-events-none`}),C&&(0,G.jsxs)(`div`,{className:`absolute z-50 w-full mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg max-h-48 overflow-y-auto`,children:[re.length===0?(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:_(`inventory.noResults`)}):re.map(t=>(0,G.jsx)(`button`,{type:`button`,className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary ${e.subtype===t?`bg-bambu-green/10 text-bambu-green`:`text-white`}`,onClick:()=>{H(`subtype`,t),w(!1),A(``)},children:t},t)),k&&!VU.some(e=>e.toLowerCase()===k.toLowerCase().trim())&&(0,G.jsx)(`button`,{type:`button`,className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary text-bambu-green border-t border-bambu-dark-tertiary`,onClick:()=>{H(`subtype`,k),w(!1),A(``)},children:_(`inventory.useCustomBrand`,{brand:k})})]})]}),g?.subtype&&(0,G.jsx)(`p`,{className:`mt-1 text-xs text-red-700 dark:text-red-400`,children:g.subtype})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:_(`inventory.labelWeight`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`input`,{type:`number`,className:`w-full px-3 py-2 pr-7 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`,value:N,min:0,onFocus:()=>I(!0),onChange:e=>P(e.target.value),onBlur:()=>{I(!1);let n=N.trim(),r=Number(n);if(!n||!Number.isFinite(r)||r<0){P(String(e.label_weight));return}let i=Math.round(r);t(`label_weight`,i),P(String(i))}}),(0,G.jsx)(`span`,{className:`absolute right-2 top-1/2 -translate-y-1/2 text-xs text-bambu-gray`,children:`g`})]})]}),f&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:_(`inventory.quantity`)}),(0,G.jsx)(`input`,{type:`number`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`,value:m,min:1,max:100,onChange:e=>{h(Math.max(1,Math.min(100,parseInt(e.target.value)||1)))}})]})]})}function _1e(e){let t=e.split(/[\s,]+/).map(e=>e.trim().replace(/^#/,``)).filter(Boolean),n=[],r=[];for(let e of t)(e.length===6||e.length===8)&&/^[0-9a-fA-F]+$/.test(e)?n.push(e.toLowerCase()):r.push(e);return{value:n.join(`,`),invalid:r}}function v1e({formData:e,updateField:t,recentColors:n,onColorUsed:r,catalogColors:i}){let{t:a}=U(),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(``),u=(e.rgba.replace(`#`,``)+`FF`).substring(0,8).toUpperCase(),d=u.substring(0,6),f=u.substring(6,8)===`00`,[p,m]=(0,y.useState)(f?u:d);(0,y.useEffect)(()=>{m(f?u:d)},[d,u,f]);let h=e=>u===(e.replace(`#`,``)+`FF`).substring(0,8).toUpperCase(),g=e=>kf(e),_=(e,n,i,a)=>{let o=e.replace(`#`,``).toUpperCase();if(t(`rgba`,o.length===8?o:o+`FF`),t(`color_name`,n),i!==void 0){let e=i??``;w(e),E([]),D.current=e,t(`extra_colors`,e)}a!==void 0&&t(`effect_type`,a??``),r({name:n,hex:e})},v=(0,y.useMemo)(()=>{if(i.length===0)return[];let t=e.brand?.trim(),n=e.material?.toLowerCase().trim(),r=e.subtype?.toLowerCase().trim();if(!t&&!n)return[];let a=t?t.toLowerCase().split(/[\s\-_]+/).filter(e=>e.length>=2):[],o=e=>{if(a.length===0)return!0;let t=e.toLowerCase();return a.some(e=>t.includes(e))};if(t&&!n){let e=i.filter(e=>o(e.manufacturer));if(e.length>0)return e.map(e=>({name:e.color_name,hex:e.hex_color.replace(`#`,``).substring(0,6),manufacturer:e.manufacturer,material:typeof e.material==`string`?e.material:void 0,extra_colors:e.extra_colors??null,effect_type:e.effect_type??null}))}let s=n&&r?`${n} ${r}`:``;if(s){let e=i.filter(e=>o(e.manufacturer)&&e.material?.toLowerCase()===s);if(e.length>0)return e.map(e=>({name:e.color_name,hex:e.hex_color.replace(`#`,``).substring(0,6),manufacturer:e.manufacturer,material:typeof e.material==`string`?e.material:void 0,extra_colors:e.extra_colors??null,effect_type:e.effect_type??null}));let t=s.replace(/\+$/,``);if(t!==s){let e=i.filter(e=>o(e.manufacturer)&&e.material?.toLowerCase()===t);if(e.length>0)return e.map(e=>({name:e.color_name,hex:e.hex_color.replace(`#`,``).substring(0,6),manufacturer:e.manufacturer,material:typeof e.material==`string`?e.material:void 0}))}}if(n){let e=i.filter(e=>o(e.manufacturer)&&(!e.material||e.material.toLowerCase().startsWith(n)));if(e.length>0)return e.map(e=>({name:e.color_name,hex:e.hex_color.replace(`#`,``).substring(0,6),manufacturer:e.manufacturer,material:typeof e.material==`string`?e.material:void 0,extra_colors:e.extra_colors??null,effect_type:e.effect_type??null}))}return[]},[i,e.brand,e.material,e.subtype]),b=(0,y.useMemo)(()=>{if(!c)return v;if(v.length===0)return[];let e=c.toLowerCase();return v.filter(t=>t.name.toLowerCase().includes(e)||(t.manufacturer?.toLowerCase().includes(e)??!1)||(t.material?.toLowerCase().includes(e)??!1))},[c,v]),x=v.length>0,S=(0,y.useMemo)(()=>c?UU.filter(e=>e.name.toLowerCase().includes(c.toLowerCase())):o?UU:HU,[c,o]),[C,w]=(0,y.useState)(e.extra_colors),[T,E]=(0,y.useState)([]),D=(0,y.useRef)(e.extra_colors);(0,y.useEffect)(()=>{e.extra_colors!==D.current&&(w(e.extra_colors),E([]),D.current=e.extra_colors)},[e.extra_colors]);let O=(0,y.useMemo)(()=>CU({rgba:e.rgba,extraColors:e.extra_colors,effectType:e.effect_type,subtype:e.subtype,effectSize:`bar`}),[e.rgba,e.extra_colors,e.effect_type,e.subtype]),k=e=>{if(w(e),!e.trim()){E([]),D.current=``,t(`extra_colors`,``);return}let{value:n,invalid:r}=_1e(e);E(r),D.current=n,t(`extra_colors`,n)};return(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsx)(`div`,{className:`h-10 rounded-lg border border-bambu-dark-tertiary`,style:O,"data-testid":`color-preview-banner`}),n.length>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-xs text-bambu-gray shrink-0`,children:[(0,G.jsx)(js,{className:`w-3 h-3`}),(0,G.jsx)(`span`,{children:a(`inventory.recentColors`)})]}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1.5`,children:n.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>_(e.hex,e.name),className:`w-6 h-6 rounded border-2 transition-all hover:scale-110 ${h(e.hex)?`border-bambu-green ring-1 ring-bambu-green/30 scale-110`:`border-bambu-dark-tertiary`}`,style:g(e.hex),title:e.name},e.hex))})]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray/50 pointer-events-none`}),(0,G.jsx)(`input`,{type:`text`,className:`w-full pl-9 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`,placeholder:a(`inventory.searchColors`),value:c,onChange:e=>l(e.target.value)})]}),x?(0,G.jsxs)(`div`,{className:`space-y-1.5`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:c?a(`inventory.searchResults`):`${e.brand}${e.material?` ${e.material}`:``}`}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-1.5`,children:[b.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>_(e.hex,e.name,e.extra_colors,e.effect_type),className:`w-6 h-6 rounded border-2 transition-all hover:scale-110 hover:z-20 relative group ${h(e.hex)?`border-bambu-green ring-1 ring-bambu-green/30 scale-110`:`border-bambu-dark-tertiary`}`,style:g(e.hex),title:e.manufacturer&&e.material?`${e.name} (${e.manufacturer} — ${e.material})`:e.manufacturer?`${e.name} (${e.manufacturer})`:e.name,children:(0,G.jsx)(`span`,{className:`absolute -bottom-7 left-1/2 -translate-x-1/2 px-2 py-0.5 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-xs whitespace-nowrap opacity-0 group-hover:opacity-100 transition-opacity pointer-events-none z-20 shadow-lg text-white`,children:e.manufacturer&&e.material?`${e.name} (${e.manufacturer} — ${e.material})`:e.manufacturer?`${e.name} (${e.manufacturer})`:e.name})},`${e.hex}-${e.name}-${e.manufacturer??``}`)),b.length===0&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray py-1`,children:a(`inventory.noColorsFound`)})]})]}):(0,G.jsxs)(`div`,{className:`space-y-1.5`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-xs text-bambu-gray`,children:[(0,G.jsx)(`span`,{children:a(c?`inventory.searchResults`:o?`inventory.allColors`:`inventory.commonColors`)}),!c&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>s(!o),className:`flex items-center gap-1 hover:text-white transition-colors`,children:o?(0,G.jsxs)(G.Fragment,{children:[a(`inventory.showLess`),` `,(0,G.jsx)(gs,{className:`w-3 h-3`})]}):(0,G.jsxs)(G.Fragment,{children:[a(`inventory.showAll`),` `,(0,G.jsx)(ps,{className:`w-3 h-3`})]})})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-1.5`,children:[S.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>_(e.hex,e.name),className:`w-6 h-6 rounded border-2 transition-all hover:scale-110 hover:z-20 relative group ${h(e.hex)?`border-bambu-green ring-1 ring-bambu-green/30 scale-110`:`border-bambu-dark-tertiary`}`,style:g(e.hex),title:e.name,children:(0,G.jsx)(`span`,{className:`absolute -bottom-7 left-1/2 -translate-x-1/2 px-2 py-0.5 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-xs whitespace-nowrap opacity-0 group-hover:opacity-100 transition-opacity pointer-events-none z-20 shadow-lg text-white`,children:e.name})},e.hex)),S.length===0&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray py-1`,children:a(`inventory.noColorsFound`)})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:a(`inventory.colorName`)}),(0,G.jsx)(`input`,{type:`text`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`,placeholder:a(`inventory.colorNamePlaceholder`),value:e.color_name,onChange:e=>t(`color_name`,e.target.value)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:a(`inventory.hexColor`)}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsx)(`span`,{className:`absolute left-3 top-1/2 -translate-y-1/2 text-bambu-gray`,children:`#`}),(0,G.jsx)(`input`,{type:`text`,className:`w-full pl-7 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm font-mono uppercase focus:outline-none focus:border-bambu-green`,placeholder:`RRGGBB`,value:p.toUpperCase(),onChange:e=>{let n=e.target.value.replace(`#`,``).replace(/[^0-9A-Fa-f]/g,``).toUpperCase(),r=n.length>8?n.substring(0,8):n;m(r),r.length===6?t(`rgba`,r+`FF`):r.length===8&&t(`rgba`,r)},onBlur:()=>{if(p.length===7){let e=p+`0`;m(e),t(`rgba`,e)}else if(p.length>0&&p.length<6){let e=p.padEnd(6,`0`);m(e),t(`rgba`,e+`FF`)}}})]}),(0,G.jsx)(`input`,{type:`color`,className:`w-11 h-[38px] rounded-lg cursor-pointer border border-bambu-dark-tertiary shrink-0 bg-transparent`,value:`#${d}`,onChange:e=>{t(`rgba`,e.target.value.replace(`#`,``).toUpperCase()+`FF`)},title:a(`inventory.pickColor`)})]})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 gap-3 pt-2 border-t border-bambu-dark-tertiary/50`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:a(`inventory.extraColorsLabel`)}),(0,G.jsx)(`input`,{type:`text`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm font-mono placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`,placeholder:a(`inventory.extraColorsPlaceholder`),value:C,onChange:e=>k(e.target.value),"data-testid":`extra-colors-input`}),T.length>0&&(0,G.jsx)(`p`,{className:`text-xs text-red-700 dark:text-red-400 mt-1`,children:a(`inventory.extraColorsInvalid`,{tokens:T.join(`, `)})}),!T.length&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/70 mt-1`,children:a(`inventory.extraColorsHint`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1 flex items-center gap-1.5`,children:[(0,G.jsx)(gu,{className:`w-3.5 h-3.5`}),a(`inventory.colorEffectLabel`)]}),(0,G.jsxs)(`div`,{className:`flex gap-2 items-stretch`,children:[(0,G.jsx)(`select`,{className:`flex-1 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`,value:e.effect_type,onChange:e=>t(`effect_type`,e.target.value),"data-testid":`effect-type-select`,children:bU.map(e=>(0,G.jsx)(`option`,{value:e.value,children:a(e.labelKey)},e.value||`none`))}),(0,G.jsx)($8,{rgba:e.rgba,extraColors:e.extra_colors,effectType:e.effect_type,subtype:e.subtype,effectSize:`preview`,className:`w-10 h-10`,shape:`square`})]})]})]})]})}function y1e({catalog:e,value:t,onChange:n,catalogId:r,onCatalogIdChange:i}){let{t:a}=U(),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(``),u=(0,y.useRef)(null),d=(0,y.useRef)(null);(0,y.useEffect)(()=>{let e=e=>{u.current&&!u.current.contains(e.target)&&s(!1)};return document.addEventListener(`mousedown`,e),()=>document.removeEventListener(`mousedown`,e)},[]),(0,y.useEffect)(()=>{if(e.length===0)return;let n=e.filter(e=>e.weight===t);if(r){let n=e.find(e=>e.id===r);if(n&&n.weight===t)return}n.length===1?i(n[0].id):n.length===0&&r!==null&&i(null)},[t,e,r,i]);let f=(0,y.useMemo)(()=>{if(!c)return e;let t=c.toLowerCase();return e.filter(e=>e.name.toLowerCase().includes(t)||e.weight.toString().includes(t))},[e,c]),p=(0,y.useMemo)(()=>e.filter(e=>e.weight===t),[e,t]),m=(0,y.useMemo)(()=>{if(o)return c;if(r){let t=e.find(e=>e.id===r);if(t)return t.name}return p.length>0?p[0].name:``},[o,c,r,e,p]);return(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:(0,G.jsxs)(`span`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(ql,{className:`w-3.5 h-3.5 text-bambu-gray`}),a(`inventory.coreWeight`)]})}),(0,G.jsxs)(`div`,{className:`flex gap-2 items-center`,children:[(0,G.jsxs)(`div`,{className:`flex-1 min-w-0 relative`,ref:u,children:[(0,G.jsx)(`input`,{ref:d,type:`text`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`,placeholder:a(`inventory.searchSpoolWeight`),value:m,onFocus:()=>{s(!0),l(``)},onChange:e=>{l(e.target.value),s(!0)}}),o&&(0,G.jsx)(`div`,{className:`absolute z-50 w-full mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg max-h-64 overflow-y-auto`,children:f.length===0?(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:a(`inventory.noResults`)}):f.map(e=>(0,G.jsxs)(`button`,{type:`button`,className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex justify-between items-center ${(r?e.id===r:e.weight===t)?`bg-bambu-green/10 text-bambu-green`:`text-white`}`,onClick:()=>{i(e.id),n(e.weight),s(!1),l(``)},children:[(0,G.jsx)(`span`,{className:`truncate`,children:e.name}),(0,G.jsxs)(`span`,{className:`font-mono text-xs text-bambu-gray ml-2 shrink-0`,children:[e.weight,`g`]})]},e.id))})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 shrink-0`,children:[(0,G.jsx)(`input`,{type:`number`,className:`w-16 px-2 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm text-center font-mono focus:outline-none focus:border-bambu-green`,value:t,min:0,max:2e3,onChange:e=>{let t=parseInt(e.target.value);!isNaN(t)&&t>=0&&n(t)}}),(0,G.jsx)(`span`,{className:`text-bambu-gray text-sm`,children:`g`})]})]})]})}function b1e({formData:e,updateField:t,spoolCatalog:n,currencySymbol:r,availableCategories:i,availableLocations:a=[],onCreateLocation:o,globalLowStockThreshold:s,spoolmanMode:c=!1}){let{t:l}=U(),{showToast:u}=Gd(),[d,f]=(0,y.useState)(``),[p,m]=(0,y.useState)(!1),[h,g]=(0,y.useState)(``),[_,v]=(0,y.useState)(!1),[b,x]=(0,y.useState)(``),[S,C]=(0,y.useState)(!1),w=Math.max(0,e.label_weight-e.weight_used),T=e.core_weight+w;return(0,y.useEffect)(()=>{p||f(String(T))},[p,T]),(0,y.useEffect)(()=>{_||g(String(w))},[_,w]),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 gap-x-4 gap-y-4`,children:[(0,G.jsx)(`div`,{className:`sm:col-span-2`,children:c?(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray px-1`,children:l(`inventory.spoolWeightManagedBySpoolman`)}):(0,G.jsx)(y1e,{catalog:n,value:e.core_weight,onChange:e=>t(`core_weight`,e),catalogId:e.core_weight_catalog_id,onCatalogIdChange:e=>t(`core_weight_catalog_id`,e)})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:l(`inventory.currentWeight`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsx)(`input`,{type:`number`,value:h,min:0,max:e.label_weight,onFocus:()=>v(!0),onChange:e=>{g(e.target.value)},onBlur:()=>{v(!1);let n=h.trim(),r=Number(n);if(!n||!Number.isFinite(r)||r<0||r>e.label_weight){g(String(w));return}let i=Math.round(r);t(`weight_used`,Math.max(0,e.label_weight-i)),g(String(i))},className:`w-full px-3 py-2 pr-7 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`}),(0,G.jsx)(`span`,{className:`absolute right-2 top-1/2 -translate-y-1/2 text-xs text-bambu-gray`,children:`g`})]}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray shrink-0`,children:[`/ `,e.label_weight,`g`]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:l(`inventory.measuredWeight`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsx)(`input`,{type:`number`,value:d,min:0,onFocus:()=>m(!0),onChange:e=>{f(e.target.value)},onBlur:()=>{m(!1);let n=d.trim(),r=Number(n),i=e.core_weight,a=e.core_weight+e.label_weight;if(!n||!Number.isFinite(r)||r<i||r>a){u(l(`inventory.measuredWeightError`,{min:i,max:a}),`error`),f(String(T));return}let o=Math.round(r),s=Math.max(0,Math.min(e.label_weight,o-e.core_weight));t(`weight_used`,Math.max(0,e.label_weight-s)),f(String(o))},className:`w-full px-3 py-2 pr-7 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`}),(0,G.jsx)(`span`,{className:`absolute right-2 top-1/2 -translate-y-1/2 text-xs text-bambu-gray`,children:`g`})]}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray shrink-0`,children:[`/ `,e.core_weight+e.label_weight,`g`]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:l(`inventory.costPerKg`,`Cost per kg`)}),(0,G.jsx)(`div`,{className:`flex items-center gap-2`,children:(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsx)(`span`,{className:`absolute left-3 top-1/2 -translate-y-1/2 text-bambu-gray text-sm pointer-events-none`,children:r}),(0,G.jsx)(`input`,{type:`number`,value:e.cost_per_kg??``,min:0,step:.01,placeholder:`0.00`,onChange:e=>{t(`cost_per_kg`,e.target.value===``?null:parseFloat(e.target.value))},style:{paddingLeft:`${Math.max(2,r.length*.6+1)}rem`},className:`w-full py-2 pr-3 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`})]})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,htmlFor:`spool-category`,children:l(`inventory.category`)}),(0,G.jsx)(`input`,{id:`spool-category`,type:`text`,list:`spool-category-options`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`,placeholder:l(`inventory.categoryPlaceholder`),value:e.category,maxLength:50,onChange:e=>t(`category`,e.target.value)}),i.length>0&&(0,G.jsx)(`datalist`,{id:`spool-category-options`,children:i.map(e=>(0,G.jsx)(`option`,{value:e},e))})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,htmlFor:`spool-low-stock-threshold`,children:l(`inventory.lowStockThresholdOverride`)}),(0,G.jsx)(`div`,{className:`flex items-center gap-2`,children:(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsx)(`input`,{id:`spool-low-stock-threshold`,type:`number`,className:`w-full px-3 py-2 pr-8 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`,placeholder:String(s),value:e.low_stock_threshold_pct??``,min:1,max:99,step:1,onChange:e=>{let n=e.target.value;if(n===``){t(`low_stock_threshold_pct`,null);return}let r=Number(n);Number.isFinite(r)&&t(`low_stock_threshold_pct`,Math.min(99,Math.max(1,Math.round(r))))}}),(0,G.jsx)(`span`,{className:`absolute right-3 top-1/2 -translate-y-1/2 text-xs text-bambu-gray pointer-events-none`,children:`%`})]})}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:l(`inventory.lowStockThresholdOverrideHelp`,{global:s})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,htmlFor:`spool-storage-location`,children:l(`inventory.storageLocation`)}),(0,G.jsxs)(`select`,{id:`spool-storage-location`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`,value:e.location_id??``,onChange:e=>{let n=e.target.value;if(!n){t(`location_id`,null);return}t(`location_id`,Number(n))},children:[(0,G.jsx)(`option`,{value:``,children:l(`inventory.storageLocationNone`)}),a.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]}),o&&(0,G.jsxs)(`div`,{className:`mt-2 flex gap-2`,children:[(0,G.jsx)(`input`,{type:`text`,maxLength:255,className:`flex-1 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`,placeholder:l(`locations.createPlaceholder`),value:b,onChange:e=>x(e.target.value)}),(0,G.jsx)(`button`,{type:`button`,className:`px-3 py-2 text-sm rounded-lg bg-bambu-dark-tertiary text-white hover:bg-bambu-gray-dark disabled:opacity-50`,disabled:!b.trim()||S,onClick:async()=>{let e=b.trim();if(!(!e||!o)){C(!0);try{let n=await o(e);n&&(t(`location_id`,n.id),x(``))}finally{C(!1)}}},children:l(`locations.addShort`)})]})]}),(0,G.jsxs)(`div`,{className:`sm:col-span-2`,children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:l(`inventory.note`)}),(0,G.jsx)(`textarea`,{className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green resize-none min-h-[80px]`,placeholder:l(`inventory.notePlaceholder`),value:e.note,onChange:e=>t(`note`,e.target.value)})]})]})}function x1e({filaments:e,isLoading:t,selectedId:n,onSelect:r}){let{t:i}=U(),[a,o]=(0,y.useState)(!1),[s,c]=(0,y.useState)(``),l=(0,y.useRef)(null),u=(0,y.useRef)(null),d=(0,y.useMemo)(()=>e.find(e=>e.id===n)??null,[e,n]);(0,y.useEffect)(()=>{let e=e=>{l.current&&!l.current.contains(e.target)&&(o(!1),c(``))};return document.addEventListener(`mousedown`,e),()=>document.removeEventListener(`mousedown`,e)},[]);let f=(0,y.useMemo)(()=>{let t=s.toLowerCase().trim();return t?e.filter(e=>e.name.toLowerCase().includes(t)||(e.material?.toLowerCase().includes(t)??!1)||(e.vendor?.name.toLowerCase().includes(t)??!1)||(e.color_name?.toLowerCase().includes(t)??!1)):e},[e,s]);(0,y.useEffect)(()=>{a&&u.current?.focus()},[a]);let p=()=>{o(!0),c(``)},m=e=>{r(e),o(!1),c(``)};return(0,G.jsxs)(`div`,{ref:l,className:`relative`,children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:i(`inventory.pickFromSpoolmanCatalog`)}),(0,G.jsxs)(`button`,{type:`button`,onClick:p,className:`w-full flex items-center gap-2 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-left focus:outline-none focus:border-bambu-green hover:border-bambu-gray transition-colors`,children:[t?(0,G.jsx)(Y,{className:`w-4 h-4 text-bambu-gray animate-spin shrink-0`}):d?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{className:`w-4 h-4 rounded-full shrink-0 border border-white/20`,style:kf(d.color_hex),"aria-label":i(`inventory.spoolmanFilamentColorSwatch`)}),(0,G.jsxs)(`span`,{className:`text-white text-sm truncate flex-1`,children:[d.vendor?.name?`${d.vendor.name} — `:``,d.name]})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Sl,{className:`w-4 h-4 text-bambu-gray shrink-0`}),(0,G.jsx)(`span`,{className:`text-bambu-gray text-sm flex-1`,children:i(`inventory.spoolmanFilamentCatalog`)})]}),(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray shrink-0 ml-auto`})]}),a&&(0,G.jsxs)(`div`,{className:`absolute z-50 w-full mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl`,children:[(0,G.jsx)(`div`,{className:`p-2 border-b border-bambu-dark-tertiary`,children:(0,G.jsx)(`input`,{ref:u,type:`text`,value:s,onChange:e=>c(e.target.value),placeholder:i(`inventory.pickFromSpoolmanCatalog`),className:`w-full px-2 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm placeholder-bambu-gray focus:outline-none focus:border-bambu-green`})}),(0,G.jsx)(`ul`,{className:`max-h-56 overflow-y-auto py-1`,children:t?(0,G.jsxs)(`li`,{className:`flex items-center justify-center gap-2 py-4 text-bambu-gray text-sm`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),(0,G.jsx)(`span`,{children:i(`common.loading`,`Loading…`)})]}):f.length===0?(0,G.jsx)(`li`,{className:`py-4 text-center text-bambu-gray text-sm`,children:i(`inventory.noSpoolmanFilaments`)}):f.map(e=>(0,G.jsx)(`li`,{children:(0,G.jsxs)(`button`,{type:`button`,onClick:()=>m(e),className:`w-full flex items-center gap-2 px-3 py-2 text-left hover:bg-bambu-dark-tertiary transition-colors ${e.id===n?`bg-bambu-dark-tertiary`:``}`,children:[(0,G.jsx)(`span`,{className:`w-4 h-4 rounded-full shrink-0 border border-white/20`,style:kf(e.color_hex),"aria-label":i(`inventory.spoolmanFilamentColorSwatch`)}),(0,G.jsxs)(`span`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`span`,{className:`block text-white text-sm truncate`,children:[e.vendor?.name?`${e.vendor.name} — `:``,e.name]}),(0,G.jsxs)(`span`,{className:`block text-bambu-gray text-xs truncate`,children:[[e.material,e.color_name].filter(Boolean).join(` · `),e.weight?` · ${e.weight}g`:``]})]})]})},e.id))})]})]})}function h9(e){let t=(e??``).trim().toUpperCase().slice(0,2);return t===`HH`||t===`HS`?t:null}function g9(e){return e?e===`HH`?`HF`:`S`:null}function S1e(e,t){let n=e.nozzles??[];return h9(n[(e.printer.nozzle_count??1)>1&&t>0?t:0]?.nozzle_type)??h9(n[0]?.nozzle_type)}function C1e(e){let t=new Set;for(let n of e.nozzles??[]){let e=(n?.nozzle_diameter??``).trim();e&&parseFloat(e)>0&&t.add(e)}for(let n of e.calibrations){let e=(n.nozzle_diameter??``).trim();e&&parseFloat(e)>0&&t.add(e)}return Array.from(t).sort((e,t)=>parseFloat(e)-parseFloat(t))}function w1e(e,t){return(e.printer.nozzle_count??1)>1?[{extruder:1,label:t.left},{extruder:0,label:t.right}]:[{extruder:0,label:t.single}]}function T1e({formData:e,printersWithCalibrations:t,filamentOptions:n,modelPresets:r,setModelPresets:i,selectedProfiles:a,setSelectedProfiles:o,selectedGroupId:s,setSelectedGroupId:c,printerModels:l,isLoading:u=!1}){let{t:d}=U(),f=(0,y.useMemo)(()=>{let e=new Map,n=[];for(let r of t){let t=(r.printer.model||``).trim();if(!t){n.push(r);continue}let i=e.get(t);i?i.push(r):e.set(t,[r])}return[...Array.from(e.entries()).map(([e,t])=>({id:`m:${e}`,model:e,printers:t,diameters:Array.from(new Set([...GU,...t.flatMap(C1e)])).sort((e,t)=>parseFloat(e)-parseFloat(t))})).sort((e,t)=>e.model.localeCompare(t.model)),...n.map(e=>({id:`p:${e.printer.id}`,model:``,printers:[e],diameters:Array.from(new Set([...GU,...C1e(e)])).sort((e,t)=>parseFloat(e)-parseFloat(t))}))]},[t]),p=f.find(e=>e.id===s)??f[0],m=(0,y.useMemo)(()=>{let e=new Map;return(t,r)=>{if(!t)return n;let i=e.get(t);if(i||(i=n.filter(e=>{let n=RU(e.name,l??{});return!n||AU(n,t)}),e.set(t,i)),r&&!i.some(e=>e.code===r)){let e=n.find(e=>e.code===r);if(e)return[e,...i]}return i}},[n,l]),h=[e.brand,e.material,e.subtype].map(e=>e.trim()).filter(Boolean).join(` `),g=/^[0-9A-Fa-f]{6,8}$/.test(e.rgba)?`#${e.rgba.slice(0,6)}`:`var(--bambu-gray, #808080)`,_=e=>w1e(e,{left:d(`inventory.leftNozzle`),right:d(`inventory.rightNozzle`),single:d(`inventory.nozzle`)}),v=t=>t.printer.connected?t.calibrations.filter(t=>aW(t,e)):[],b=e=>{let t=0;for(let n of e.printers){let r=v(n);for(let i of _(n))for(let o of e.diameters)r.some(e=>(e.extruder_id??0)===i.extruder&&((e.nozzle_diameter??``).trim()||`0.4`)===o)&&(a.get(rW(n.printer.id,i.extruder,o))||t++)}return t},x=(e,t,n)=>{i(r=>{let i=new Map(r),a=iW(e,t);return n?i.set(a,{code:n.code,name:n.name}):i.delete(a),i})},S=(e,t,n,r)=>{o(i=>{let a=new Map(i),o=rW(e,t,n);return r?a.set(o,r):a.delete(o),a})},C=()=>{let t=n.find(t=>t.code===e.slicer_filament);if(!t)return;let r=t.name.split(`@`)[0].trim().toLowerCase();r&&i(e=>{let t=new Map(e);for(let e of f){if(!e.model)continue;let n=m(e.model,void 0).filter(e=>e.name.toLowerCase().startsWith(r)&&RU(e.name,l??{})!==null);if(n.length!==0)for(let r of e.diameters){let i=n.find(e=>RegExp(`\\b${r.replace(`.`,`\\.`)}\\s*nozzle\\b`,`i`).test(e.name)),a=n.find(e=>!/\b[\d.]+\s*nozzle\b/i.test(e.name)),o=i??a;o&&t.set(iW(e.model,r),{code:o.code,name:o.name})}}return t})};if(t.length===0)return(0,G.jsx)(`div`,{className:`p-6 bg-bambu-dark rounded-lg text-center`,children:(0,G.jsxs)(`p`,{className:`text-bambu-gray flex items-center justify-center gap-2`,children:[u&&(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),d(u?`common.loading`:`inventory.noPrintersConfigured`)]})});let w=(e,t,n)=>{let i=iW(e,t),a=r.get(i),o=m(e,a?.code);return(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`div`,{className:`flex-1 min-w-0`,children:(0,G.jsx)(m1e,{ariaLabel:`${e} ${t}mm ${d(`inventory.filamentPreset`)}`,value:a?.code??``,options:o,inheritLabel:n,disabled:!e,onChange:n=>x(e,t,n)})}),(0,G.jsx)(`span`,{className:`text-[10px] font-semibold uppercase tracking-wide px-2 py-1 rounded-full shrink-0 ${a?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:d(a?`inventory.presetOverride`:`inventory.presetInherited`)})]})};return(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(h||e.color_name)&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2.5 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg`,children:[(0,G.jsx)(`span`,{className:`w-5 h-5 rounded-full border border-white/15 shrink-0`,style:{background:g},"aria-hidden":`true`}),h&&(0,G.jsx)(`span`,{className:`text-sm text-white truncate`,children:h}),e.color_name&&(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray truncate`,children:e.color_name})]}),(0,G.jsxs)(`div`,{className:`flex flex-col md:flex-row gap-4`,children:[(0,G.jsx)(`div`,{role:`tablist`,"aria-label":d(`inventory.printersTab`),"aria-orientation":`vertical`,className:`md:w-52 md:shrink-0 md:self-start md:sticky md:top-0 flex md:flex-col gap-1.5 overflow-x-auto md:overflow-x-visible`,children:f.map(e=>{let t=e===p,n=b(e);return(0,G.jsxs)(`button`,{type:`button`,role:`tab`,onClick:()=>c(e.id),"aria-selected":t,className:`flex items-center gap-2 px-3 py-2 rounded-lg border text-left transition-colors shrink-0 md:shrink ${t?`bg-bambu-green/10 border-bambu-green/40 text-white`:`bg-transparent border-transparent text-bambu-gray hover:bg-bambu-dark hover:text-white`}`,children:[(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`div`,{className:`text-sm font-semibold truncate`,children:e.model||d(`inventory.unknownModel`)}),(0,G.jsx)(`div`,{className:`text-[11px] text-bambu-gray`,children:e.printers.length===1?d(`inventory.onePrinter`):d(`inventory.nPrinters`,{n:e.printers.length})})]}),n>0?(0,G.jsx)(`span`,{className:`text-[10px] font-mono px-1.5 py-0.5 rounded-full bg-bambu-dark-tertiary text-bambu-gray shrink-0`,children:n}):(0,G.jsx)(fs,{className:`w-3.5 h-3.5 text-bambu-green shrink-0`})]},e.id)})}),(0,G.jsx)(`div`,{className:`flex-1 min-w-0`,children:p&&(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-3`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`h4`,{className:`text-base font-semibold text-white truncate`,children:p.model||d(`inventory.unknownModel`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:p.printers.map(e=>e.printer.name).join(`, `)})]}),e.slicer_filament&&(0,G.jsxs)(`button`,{type:`button`,onClick:C,title:d(`inventory.autoMatchPresetsHint`),className:`flex items-center gap-1.5 px-2 py-1 text-xs bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray hover:text-white hover:border-bambu-green transition-colors shrink-0`,children:[(0,G.jsx)(gu,{className:`w-3.5 h-3.5`}),d(`inventory.autoMatchPresets`)]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs font-semibold text-bambu-gray uppercase tracking-wide`,children:d(`inventory.filamentPreset`)}),p.model?(0,G.jsx)(`div`,{className:`space-y-2`,children:p.diameters.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsxs)(`span`,{className:`text-xs font-mono text-bambu-gray w-14 shrink-0`,children:[e,`mm`]}),(0,G.jsx)(`div`,{className:`flex-1 min-w-0`,children:w(p.model,e,d(`inventory.presetUseSpoolDefault`))})]},e))}):(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic`,children:d(`inventory.presetNeedsModel`)})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs font-semibold text-bambu-gray uppercase tracking-wide`,children:d(`inventory.kProfilesPerPrinter`)}),e.material?p.printers.map(e=>{let t=v(e);return(0,G.jsxs)(`div`,{className:`p-3 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1`,children:[(0,G.jsx)(Ll,{className:`w-3.5 h-3.5 text-bambu-gray shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm font-semibold text-white truncate`,children:e.printer.name}),(0,G.jsx)(`span`,{className:`text-[10px] font-semibold uppercase tracking-wide px-2 py-0.5 rounded-full shrink-0 ${e.printer.connected?`bg-green-500/20 text-green-500`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:e.printer.connected?d(`inventory.connected`):d(`inventory.offline`)})]}),e.printer.connected?t.length===0?(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic py-1`,children:d(`inventory.noKProfilesMatch`)}):(0,G.jsxs)(`div`,{className:`grid gap-x-3 gap-y-1.5 items-center`,style:{gridTemplateColumns:`3.5rem repeat(${_(e).length}, minmax(0, 1fr))`},children:[(0,G.jsx)(`span`,{}),_(e).map(e=>(0,G.jsx)(`span`,{className:`text-[11px] font-semibold uppercase tracking-wide text-bambu-gray`,children:e.label},e.extruder)),p.diameters.map(n=>(0,G.jsxs)(y.Fragment,{children:[(0,G.jsxs)(`span`,{className:`text-xs font-mono text-bambu-gray`,children:[n,`mm`]}),_(e).map(r=>{let i=t.filter(e=>(e.extruder_id??0)===r.extruder&&((e.nozzle_diameter??``).trim()||`0.4`)===n),o=rW(e.printer.id,r.extruder,n),s=a.get(o);if(i.length===0)return(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray/50 px-2 py-1.5`,title:d(`inventory.noKProfilesMatch`),children:`—`},o);let c=S1e(e,r.extruder),l=h9(s?.nozzle_id),u=!!(c&&l&&c!==l);return(0,G.jsxs)(`select`,{title:u?d(`inventory.kProfileFlowMismatch`,{profile:g9(l),fitted:g9(c)}):void 0,"aria-label":`${e.printer.name} ${r.label} ${n}mm`,value:s?String(s.cali_idx):``,onChange:t=>{let a=i.find(e=>String(e.cali_idx)===t.target.value)??null;S(e.printer.id,r.extruder,n,a)},className:`min-w-0 px-2 py-1.5 bg-bambu-dark-secondary border rounded-lg text-sm text-white focus:outline-none focus:border-bambu-green ${u?`border-amber-500/60`:`border-bambu-dark-tertiary`}`,children:[(0,G.jsx)(`option`,{value:``,children:d(`inventory.kProfileNotSet`)}),i.map(e=>{let t=g9(h9(e.nozzle_id));return(0,G.jsx)(`option`,{value:e.cali_idx,children:`${t?`[${t}] `:``}${e.name||e.filament_id}  K=${e.k_value.toFixed(3)}`},e.cali_idx)})]},o)})]},n))]}):(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic py-1`,children:d(`inventory.printerOffline`)})]},e.printer.id)}):(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic`,children:d(`inventory.selectMaterialFirst`)})]})]})})]})]})}function E1e(e){let t=ep(e);return t?t.toLocaleDateString(`en-GB`,{day:`2-digit`,month:`2-digit`,year:`2-digit`})+` `+t.toLocaleTimeString(`en-GB`,{hour:`2-digit`,minute:`2-digit`}):``}var D1e={completed:`text-bambu-green`,failed:`text-red-700 dark:text-red-400`,aborted:`text-yellow-700 dark:text-yellow-400`};function O1e({spoolId:e}){let{t}=U(),n=co(),{showToast:r}=Gd(),{data:i,isLoading:a}=K({queryKey:[`spool-usage`,e],queryFn:()=>Z.getSpoolUsageHistory(e)}),o=q({mutationFn:()=>Z.clearSpoolUsageHistory(e),onSuccess:()=>{n.invalidateQueries({queryKey:[`spool-usage`,e]}),r(t(`inventory.historyCleared`),`success`)}});return a?(0,G.jsx)(`div`,{className:`flex justify-center py-4`,children:(0,G.jsx)(Y,{className:`w-5 h-5 animate-spin text-bambu-green`})}):!i||i.length===0?(0,G.jsxs)(`div`,{className:`text-center py-4 text-bambu-gray text-sm`,children:[(0,G.jsx)(js,{className:`w-5 h-5 mx-auto mb-2 opacity-50`}),t(`inventory.noUsageHistory`)]}):(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-white`,children:t(`inventory.usageHistory`)}),(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:()=>o.mutate(),disabled:o.isPending,className:`text-xs text-bambu-gray hover:text-red-700 dark:hover:text-red-400`,children:[(0,G.jsx)(Nu,{className:`w-3 h-3 mr-1`}),t(`inventory.clearHistory`)]})]}),(0,G.jsx)(`div`,{className:`max-h-48 overflow-y-auto space-y-1`,children:i.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-2 rounded bg-bambu-dark/50 text-xs`,children:[(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:E1e(e.created_at)}),e.print_name&&(0,G.jsx)(`span`,{className:`text-white ml-2 truncate`,title:e.print_name,children:e.print_name})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-shrink-0 ml-2`,children:[(0,G.jsxs)(`span`,{className:`text-white font-medium`,children:[e.weight_used.toFixed(1),`g`]}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[`(`,e.percent_used,`%)`]}),(0,G.jsx)(`span`,{className:D1e[e.status]||`text-bambu-gray`,children:e.status})]})]},e.id))})]})}var k1e={tag_uid:null,tray_uuid:null,tag_type:null,data_origin:null};function A1e({isOpen:e,onClose:t,spool:n,mode:r,printersWithCalibrations:i=[],currencySymbol:a,onSpoolsCreated:o,spoolmanMode:s=!1,spoolsQueryKey:c=[`inventory-spools`]}){let{t:l}=U(),u=co(),{showToast:d}=Gd(),f=()=>w8(u,c),p=r===`edit`,m=r===`copy`,[h,g]=(0,y.useState)(f9),[_,v]=(0,y.useState)({}),[b,x]=(0,y.useState)(`filament`),[S,C]=(0,y.useState)(!1),[w,T]=(0,y.useState)(!1),[E,D]=(0,y.useState)(!1),[O,k]=(0,y.useState)(1),[A,j]=(0,y.useState)(!1),[M,N]=(0,y.useState)(!1),[P,F]=(0,y.useState)([]),[I,L]=(0,y.useState)(new Set),[R,z]=(0,y.useState)(``),[B,V]=(0,y.useState)([]),[ee,te]=(0,y.useState)([]),[ne,re]=(0,y.useState)([]),[ie,ae]=(0,y.useState)([]),[oe,se]=(0,y.useState)([]),[H,ce]=(0,y.useState)([]),[le,ue]=(0,y.useState)([]),[de,fe]=(0,y.useState)(!1),[pe,me]=(0,y.useState)(new Map),[he,ge]=(0,y.useState)(new Map),[_e,ve]=(0,y.useState)(``),ye=i.length>0?i:le,be=pe.size+he.size,{data:xe=[],isLoading:Se,error:Ce}=K({queryKey:[`spoolman-inventory-filaments`],queryFn:()=>Z.getSpoolmanInventoryFilaments(),enabled:s&&e,staleTime:6e4,retry:!1});(0,y.useEffect)(()=>{ce($U())},[]),(0,y.useEffect)(()=>{let t=!1;return e&&((async()=>{N(!0);try{let[e,n]=await Promise.allSettled([(async()=>(await Z.getCloudStatus()).is_authenticated?{connected:!0,presets:await Z.getFilamentPresets()}:{connected:!1,presets:[]})(),(async()=>(await Z.orcaCloudStatus()).connected?{connected:!0,presets:(await Z.orcaCloudListProfiles()).filament}:{connected:!1,presets:[]})()]);if(t)return;let r=e.status===`fulfilled`&&e.value.connected,i=n.status===`fulfilled`&&n.value.connected,a=e.status===`fulfilled`?e.value.presets:[],o=n.status===`fulfilled`?n.value.presets:[];j(r||i),F([...a,...o]),L(new Set(o.map(e=>e.setting_id)))}catch(e){if(t)return;console.error(`Failed to fetch cloud presets:`,e),j(!1)}finally{t||N(!1)}})(),s||Z.getSpoolCatalog().then(V).catch(console.error),Z.getColorCatalog().then(se).catch(console.error),Z.getLocalPresets().then(e=>re(e.filament)).catch(console.error),Z.getBuiltinFilaments().then(ae).catch(console.error),Z.getLocations().then(e=>te(e.map(e=>({id:e.id,name:e.name})))).catch(console.error),i.length===0&&(async()=>{fe(!0);try{let e=await Z.getPrinters(),n=await Promise.all(e.map(e=>Z.getPrinterStatus(e.id).catch(()=>null))),r=await Promise.all(e.map(async(e,t)=>{let r=n[t],i=r?.connected??!1,a=[];return i&&(a=await KU(e.id,r)),{printer:{...e,connected:i},calibrations:a,nozzles:r?.nozzles}}));t||ue(r)}catch(e){console.error(`Failed to fetch printer calibrations:`,e)}finally{t||fe(!1)}})()),()=>{t=!0}},[e,i.length]);let we=(0,y.useMemo)(()=>YU(P,new Set,ne,ie,I),[P,ne,ie,I]),Te=(0,y.useMemo)(()=>{let e=JU(P,ne),t=oe.map(e=>e.manufacturer?.trim()).filter(e=>!!e),n=new Set([...e,...t]);return Array.from(n).sort((e,t)=>e.localeCompare(t))},[P,ne,oe]),Ee=(0,y.useMemo)(()=>{let e=oe.map(e=>e.material?.trim()).filter(e=>!!e),t=new Set([...zU,...e]);return Array.from(t).sort((e,t)=>e.localeCompare(t))},[oe]),De=(0,y.useMemo)(()=>{let e=[];for(let t of oe){let n=t.manufacturer?.trim(),r=t.material?.trim();n&&r&&e.push({brand:n,material:r})}for(let t of P){let n=qU(t.name);n.brand&&n.material&&e.push({brand:n.brand,material:n.material})}for(let t of ne){let n=qU(t.name),r=t.filament_vendor?.trim()||n.brand,i=n.material;r&&i&&e.push({brand:r,material:i})}return e},[P,oe,ne]),Oe=(0,y.useMemo)(()=>{let e=new Map;for(let t of De){let n=t.brand.toLowerCase(),r=t.material.toLowerCase();e.has(n)||e.set(n,new Set),e.get(n).add(r)}return e},[De]),ke=(0,y.useMemo)(()=>{let e=new Map;for(let t of De){let n=t.brand.toLowerCase(),r=t.material.toLowerCase();e.has(r)||e.set(r,new Set),e.get(r).add(n)}return e},[De]),Ae=(0,y.useMemo)(()=>ZU(Te,h.brand),[Te,h.brand]),je=(0,y.useMemo)(()=>ZU(Ee,h.material),[Ee,h.material]),Me=(0,y.useMemo)(()=>QU(Ae,h.material,ke),[Ae,h.material,ke]),Ne=(0,y.useMemo)(()=>QU(je,h.brand,Oe),[je,h.brand,Oe]),Pe=(0,y.useMemo)(()=>XU(h.slicer_filament,we),[h.slicer_filament,we]);(0,y.useEffect)(()=>{if(e){if(n){let e=n.rgba&&/^[0-9A-Fa-f]{8}$/.test(n.rgba)?n.rgba:`808080FF`;if(g({material:n.material||``,subtype:n.subtype||``,brand:n.brand||``,color_name:n.color_name_is_synthesized?``:n.color_name||``,rgba:e,extra_colors:n.extra_colors||``,effect_type:n.effect_type||``,label_weight:n.label_weight||1e3,core_weight:n.core_weight||250,core_weight_catalog_id:n.core_weight_catalog_id??null,weight_used:m?0:n.weight_used||0,slicer_filament:n.slicer_filament||``,note:n.note||``,cost_per_kg:n.cost_per_kg??null,category:n.category||``,low_stock_threshold_pct:n.low_stock_threshold_pct??null,location_id:n.location_id??null,spoolman_filament_id:null}),z(n.slicer_filament_name||n.slicer_filament||``),n.k_profiles&&n.k_profiles.length>0){let e=new Map;for(let t of n.k_profiles){if(t.cali_idx===null||t.cali_idx===void 0)continue;let n=(t.nozzle_diameter||``).trim()||`0.4`,r=t.extruder??0;e.set(rW(t.printer_id,r,n),{cali_idx:t.cali_idx,filament_id:``,setting_id:t.setting_id||``,name:t.name||``,k_value:t.k_value,n_coef:0,extruder_id:r,nozzle_diameter:n,nozzle_id:t.nozzle_type||``})}me(e)}else me(new Map)}else g(f9),z(``),me(new Map);D(!1),k(1),v({}),x(`filament`),ve(``),ge(new Map),C(!1),T(!1)}},[e,n,r,m]),(0,y.useEffect)(()=>{if(!e||!n)return;let t=!1;return(s?Z.getSpoolmanFilamentPresets:Z.getSpoolFilamentPresets)(n.id).then(e=>{if(t)return;let n=new Map;for(let t of e)n.set(iW(t.printer_model,t.nozzle_diameter||``),{code:t.slicer_filament||``,name:t.slicer_filament_name||``});ge(n)}).catch(e=>{t||(console.error(`Failed to load filament preset overrides:`,e),d(l(`inventory.filamentPresetsLoadFailed`),`warning`))}),()=>{t=!0}},[e,n?.id,s]),(0,y.useEffect)(()=>{if(!e||!n||w||h.location_id!=null)return;let t=n.storage_location?.trim();if(!t||ee.length===0)return;let r=ee.find(e=>e.name.toLowerCase()===t.toLowerCase());r&&g(e=>e.location_id===r.id?e:{...e,location_id:r.id})},[e,n,ee,h.location_id,w]);let Fe=(e,t)=>{let n=d1e.has(e);s&&n&&h.spoolman_filament_id!==null&&d(l(`inventory.spoolmanFilamentUnlinked`),`info`),g(r=>({...r,[e]:t,...s&&n&&r.spoolman_filament_id!==null?{spoolman_filament_id:null}:{}})),e===`weight_used`&&C(!0),e===`location_id`&&T(!0),_[e]&&v(t=>({...t,[e]:void 0}))},Ie=e=>{let t=e.material||``,n=e.name||``,r=t&&n.startsWith(t)?n.slice(t.length).trim():n,i=(e.color_hex??``).replace(`#`,``).toUpperCase(),a=/^[0-9A-F]{6}(?:[0-9A-F]{2})?$/.test(i)?i:`808080`,o=a.length===8?a:`${a}FF`;g(n=>({...n,spoolman_filament_id:e.id,material:t,subtype:r,brand:e.vendor?.name||``,rgba:o,color_name:e.color_name||``,label_weight:e.weight??n.label_weight})),d(l(`inventory.spoolmanFilamentSelected`),`success`)},Le=e=>{ce(t=>eW(e,t))},Re=q({mutationFn:e=>s?Z.createSpoolmanInventorySpool(e):Z.createSpool(e),onSuccess:async e=>{e?.id&&!await Ze(e.id)||(await f(),o&&o([e]),d(l(`inventory.spoolCreated`),`success`),t())},onError:e=>{e instanceof od&&e.status===503?d(l(`inventory.spoolmanUnreachable`),`error`):d(l(`inventory.saveFailed`),`error`)}}),ze=q({mutationFn:({data:e,qty:t})=>s?Z.bulkCreateSpoolmanInventorySpools(e,t):Z.bulkCreateSpools(e,t),onSuccess:async e=>{let n=s&&`created`in e?e:null,r=n?n.created:e;if(pe.size>0||he.size>0)for(let e of r)await Ze(e.id);await f(),o&&o(r),n&&n.failed_count>0?d(l(`inventory.spoolsPartiallyCreated`,{created:r.length,total:n.requested_count}),`warning`):d(l(`inventory.spoolsCreated`,{count:r.length}),`success`),t()},onError:e=>{e instanceof od&&e.status===503?d(l(`inventory.spoolmanUnreachable`),`error`):d(l(`inventory.saveFailed`),`error`)}}),Be=q({mutationFn:e=>s?Z.updateSpoolmanInventorySpool(n.id,e):Z.updateSpool(n.id,e),onSuccess:async()=>{n?.id&&!await Ze(n.id)||(await f(),d(l(`inventory.spoolUpdated`),`success`),t())},onError:e=>{e instanceof od&&e.status===503?d(l(`inventory.spoolmanUnreachable`),`error`):d(l(`inventory.saveFailed`),`error`)}}),Ve=q({mutationFn:()=>s?Z.updateSpoolmanInventorySpool(n.id,k1e):Z.updateSpool(n.id,k1e),onSuccess:async()=>{await f(),d(l(`inventory.rfidCleared`,`RFID tag cleared`),`success`),t()},onError:e=>{e instanceof od&&e.status===503?d(l(`inventory.spoolmanUnreachable`),`error`):d(l(`inventory.tagClearFailed`),`error`)}}),{data:He}=K({queryKey:[`spool-assignments`],queryFn:()=>Z.getAssignments(),enabled:e&&p&&!s}),{data:Ue}=K({queryKey:[`spoolman-slot-assignments-all`],queryFn:()=>Z.getSpoolmanSlotAssignments(),enabled:e&&p&&s}),We=(()=>{if(n)return s?Ue?.find(e=>e.spoolman_spool_id===n.id):He?.find(e=>e.spool_id===n.id)})(),{data:Ge}=K({queryKey:[`inventory-spools`],queryFn:()=>Z.getSpools(!0),enabled:e}),{data:Ke}=K({queryKey:[`settings`],queryFn:Z.getSettings,enabled:e}),{data:qe}=K({queryKey:[`slicerPrinterModels`],queryFn:Z.getSlicerPrinterModels,enabled:e,staleTime:1/0}),Je=(()=>{let e=new Set;for(let t of Ge??[]){let n=t.category?.trim();n&&e.add(n)}return Array.from(e).sort((e,t)=>e.localeCompare(t))})(),Ye=Ke?.low_stock_threshold??20,Xe=q({mutationFn:async()=>{if(!We)throw Error(`No assignment`);if(s){if(!n)throw Error(`No spool`);await Z.unassignSpoolmanSlot(n.id);return}await Z.unassignSpool(We.printer_id,We.ams_id,We.tray_id)},onSuccess:async()=>{s?(await u.invalidateQueries({queryKey:[`spoolman-slot-assignments-all`]}),await u.invalidateQueries({queryKey:[`spoolman-slot-assignments`]})):await u.invalidateQueries({queryKey:[`spool-assignments`]}),d(l(`inventory.unassignSuccess`,`Spool unassigned`),`success`),t()},onError:e=>{d(e.message,`error`)}}),Ze=async e=>{let t=s?Z.saveSpoolmanKProfiles:Z.saveSpoolKProfiles,n=s?Z.saveSpoolmanFilamentPresets:Z.saveSpoolFilamentPresets,r=[];for(let[e,t]of pe){let[n,i,a]=e.split(`:`);r.push({printer_id:parseInt(n),extruder:parseInt(i),nozzle_diameter:a||`0.4`,nozzle_type:h9(t.nozzle_id),k_value:t.k_value,name:t.name||null,cali_idx:t.cali_idx,setting_id:t.setting_id||null})}let i=[];for(let[e,t]of he){let{model:n,diameter:r}=bOe(e);n&&i.push({printer_model:n,nozzle_diameter:r,slicer_filament:t.code||null,slicer_filament_name:t.name||null})}try{await t(e,r)}catch(e){return console.error(`Failed to save K-profiles:`,e),d(l(`inventory.kProfileSaveFailed`),`warning`),!1}try{await n(e,i)}catch(e){return console.error(`Failed to save filament preset overrides:`,e),d(l(`inventory.filamentPresetSaveFailed`),`warning`),!1}return!0};if((0,y.useEffect)(()=>{if(!e)return;let n=e=>{e.key===`Escape`&&t()};return document.addEventListener(`keydown`,n),()=>document.removeEventListener(`keydown`,n)},[e,t]),!e)return null;let Qe=()=>{let e=f1e(h,E,s,r);if(!e.isValid){v(e.errors),(e.errors.slicer_filament||e.errors.material||e.errors.brand||e.errors.subtype)&&x(`filament`);return}let t=Pe?.displayName||R||null,n={material:h.material||null,subtype:h.subtype||null,brand:h.brand||null,color_name:h.color_name||null,rgba:h.rgba||null,extra_colors:h.extra_colors||null,effect_type:h.effect_type||null,label_weight:h.label_weight,...s?{}:{core_weight:h.core_weight,core_weight_catalog_id:h.core_weight_catalog_id},slicer_filament:h.slicer_filament||null,slicer_filament_name:t,nozzle_temp_min:null,nozzle_temp_max:null,note:h.note||null,cost_per_kg:h.cost_per_kg,category:h.category.trim()||null,low_stock_threshold_pct:h.low_stock_threshold_pct,...s?{spoolman_filament_id:h.spoolman_filament_id}:{}};(!p||S)&&(n.weight_used=h.weight_used),(!p||w)&&(n.location_id=h.location_id),p?Be.mutate(n):O>1?ze.mutate({data:n,qty:O}):Re.mutate(n)},$e=Re.isPending||ze.isPending||Be.isPending||Ve.isPending||Xe.isPending;return(0,G.jsxs)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60 backdrop-blur-sm`,onClick:t}),(0,G.jsxs)(`div`,{className:`relative w-full max-w-5xl mx-4 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-2xl max-h-[90vh] flex flex-col`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary flex-shrink-0`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-baseline gap-2`,children:[l(p?`inventory.editSpool`:m?`inventory.copySpool`:`inventory.addSpool`),p&&n&&(0,G.jsxs)(`span`,{className:`text-sm font-mono text-bambu-gray`,children:[`#`,n.id]})]}),(0,G.jsx)(`button`,{onClick:t,className:`p-1 text-bambu-gray hover:text-white rounded transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),r===`create`&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-4 py-2 border-b border-bambu-dark-tertiary flex-shrink-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(rd,{className:`w-4 h-4 text-amber-600 dark:text-amber-400`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:l(`inventory.quickAdd`)})]}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>{D(!E),E||x(`filament`)},className:`relative inline-flex h-5 w-9 items-center rounded-full transition-colors ${E?`bg-bambu-green`:`bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(`span`,{className:`inline-block h-3.5 w-3.5 rounded-full bg-white transition-transform ${E?`translate-x-4`:`translate-x-0.5`}`})})]}),(0,G.jsxs)(`div`,{className:`flex border-b border-bambu-dark-tertiary flex-shrink-0`,children:[(0,G.jsxs)(`button`,{onClick:()=>x(`filament`),className:`flex-1 px-4 py-2.5 text-sm font-medium flex items-center justify-center gap-2 transition-colors ${b===`filament`?`text-bambu-green border-b-2 border-bambu-green`:`text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(Go,{className:`w-4 h-4`}),l(`inventory.filamentInfoTab`)]}),!E&&(0,G.jsxs)(`button`,{onClick:()=>x(`appearance`),className:`flex-1 px-4 py-2.5 text-sm font-medium flex items-center justify-center gap-2 transition-colors ${b===`appearance`?`text-bambu-green border-b-2 border-bambu-green`:`text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(Cl,{className:`w-4 h-4`}),l(`inventory.colorAndCostTab`)]}),!E&&(0,G.jsxs)(`button`,{onClick:()=>x(`printers`),className:`flex-1 px-4 py-2.5 text-sm font-medium flex items-center justify-center gap-2 transition-colors ${b===`printers`?`text-bambu-green border-b-2 border-bambu-green`:`text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(rd,{className:`w-4 h-4`}),l(`inventory.printersTab`),be>0&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded-full bg-bambu-green/20 text-bambu-green`,children:be})]})]}),(0,G.jsx)(`div`,{className:`p-4 overflow-y-auto flex-1`,style:{scrollbarGutter:`stable`},children:b===`filament`?(0,G.jsxs)(`div`,{className:`space-y-6`,children:[s&&!p&&(0,G.jsx)(`div`,{children:Ce?(0,G.jsx)(`p`,{className:`text-sm text-red-700 dark:text-red-400 px-1`,children:l(`inventory.spoolmanCatalogLoadFailed`)}):(0,G.jsx)(x1e,{filaments:xe,isLoading:Se,selectedId:h.spoolman_filament_id,onSelect:Ie})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-bambu-gray uppercase tracking-wide mb-3`,children:l(`inventory.filamentInfo`)}),(0,G.jsx)(g1e,{formData:h,updateField:Fe,cloudAuthenticated:A,loadingCloudPresets:M,presetInputValue:R,setPresetInputValue:z,selectedPresetOption:Pe,filamentOptions:we,availableBrands:Ae,availableMaterials:je,suggestedBrands:Me,suggestedMaterials:Ne,quickAdd:E,detailsRequired:!E&&!s&&r===`create`,quantity:O,onQuantityChange:k,errors:_})]})]}):b===`appearance`?(0,G.jsxs)(`div`,{className:`space-y-6`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-bambu-gray uppercase tracking-wide mb-3`,children:l(`inventory.color`)}),(0,G.jsx)(v1e,{formData:h,updateField:Fe,recentColors:H,onColorUsed:Le,catalogColors:oe})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-bambu-gray uppercase tracking-wide mb-3`,children:l(`inventory.additional`)}),(0,G.jsx)(b1e,{formData:h,updateField:Fe,spoolCatalog:B,currencySymbol:a,availableCategories:Je,availableLocations:ee,onCreateLocation:async e=>{try{let t=await Z.createLocation({name:e});return te(e=>[...e,{id:t.id,name:t.name}].sort((e,t)=>e.name.localeCompare(t.name))),await C8(u),{id:t.id,name:t.name}}catch(e){return console.error(e),d((e instanceof Error?e.message:l(`locations.saveFailed`))||l(`locations.saveFailed`),`error`),null}},globalLowStockThreshold:Ye,spoolmanMode:s})]}),p&&n&&!s&&(0,G.jsx)(`div`,{children:(0,G.jsx)(O1e,{spoolId:n.id})})]}):(0,G.jsx)(T1e,{formData:h,printersWithCalibrations:ye,filamentOptions:we,modelPresets:he,setModelPresets:ge,selectedProfiles:pe,setSelectedProfiles:me,selectedGroupId:_e,setSelectedGroupId:ve,printerModels:qe,isLoading:de})}),(0,G.jsxs)(`div`,{className:`flex gap-2 p-4 border-t border-bambu-dark-tertiary flex-shrink-0`,children:[p&&(0,G.jsxs)(`div`,{className:`flex gap-2 mr-auto`,children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>Ve.mutate(),disabled:$e||!(n?.tag_uid||n?.tray_uuid),children:[(0,G.jsx)(Tu,{className:`w-4 h-4`}),l(`inventory.clearRfid`,`Clear RFID Tag`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>Xe.mutate(),disabled:$e||!We,children:[(0,G.jsx)(zu,{className:`w-4 h-4`}),l(`inventory.unassignSpool`,`Unassign`)]})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 ml-auto`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:t,children:l(`common.cancel`)}),(0,G.jsx)(Q,{onClick:Qe,disabled:$e,children:$e?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),l(`common.saving`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Kl,{className:`w-4 h-4`}),l(p?`common.save`:m?`inventory.copySpool`:`inventory.addSpool`)]})})]})]})]})]})}var j1e=[{value:`ams_holder_74x33`,i18nKey:`amsHolderSmall`,fallbackLabel:`AMS holder — small (74 × 33 mm)`,fallbackHint:`Single label per page; matches the printable label from MakerWorld model 752566 (AMS Filament Label Holder).`},{value:`ams_holder_75x55`,i18nKey:`amsHolderLarge`,fallbackLabel:`AMS holder — large (75 × 55 mm)`,fallbackHint:`Single label per page; fits the cardstock-insert variant of the AMS Filament Label Holder. Roomy enough for swatch, brand, material, ID, and QR code.`},{value:`box_40x30`,i18nKey:`box40x30`,fallbackLabel:`Box label (40 × 30 mm)`,fallbackHint:`Single label per page; common DK/Brother roll size, good for filament-bag and storage-bin labels.`},{value:`box_62x29`,i18nKey:`box`,fallbackLabel:`Box label (62 × 29 mm)`,fallbackHint:`Single label per page; sized for Brother PT/QL and Dymo small labels.`},{value:`avery_l7160`,i18nKey:`averyL7160`,fallbackLabel:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,fallbackHint:`EU sheet stock; 21 labels per A4 page.`},{value:`avery_5160`,i18nKey:`avery5160`,fallbackLabel:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,fallbackHint:`US sheet stock; 30 labels per Letter page.`}],_9={avery_l7160:21,avery_5160:30},v9=Math.max(...Object.values(_9));function M1e(e){let t=window.URL.createObjectURL(e);if(!window.open(t,`_blank`)){let e=document.createElement(`a`);e.href=t,e.download=`bambuddy-labels.pdf`,document.body.appendChild(e),e.click(),document.body.removeChild(e)}setTimeout(()=>window.URL.revokeObjectURL(t),6e4)}function N1e(e){return kf(e)}function P1e(e){return Ef(e.color_name,e.rgba,e.color_name_is_synthesized)}function F1e(e){return`${P1e(e)??`${e.material}${e.subtype?` ${e.subtype}`:``}`}${e.brand?` · ${e.brand}`:``}`}function I1e(e){return[P1e(e),e.color_name,e.material,e.subtype,e.brand,`#${e.id}`].filter(Boolean).join(` `).toLowerCase()}function L1e(e){if(!e)return[1,0];let t=e.replace(/^#/,``).slice(0,6);if(t.length!==6)return[1,0];let n=parseInt(t.slice(0,2),16),r=parseInt(t.slice(2,4),16),i=parseInt(t.slice(4,6),16);if([n,r,i].some(Number.isNaN))return[1,0];let a=n/255,o=r/255,s=i/255,c=Math.max(a,o,s),l=Math.min(a,o,s),u=(c+l)/2,d=c-l;if((d===0?0:d/(1-Math.abs(2*u-1)))<.1)return[1,u];let f=0;return f=c===a?(o-s)/d%6:c===o?(s-a)/d+2:(a-o)/d+4,f*=60,f<0&&(f+=360),[0,f]}function R1e({isOpen:e,onClose:t,availableSpools:n,initialSelectedIds:r,spoolmanMode:i}){let{t:a}=U(),o=Mf(),{showToast:s}=Gd(),[c,l]=(0,y.useState)(null),[u,d]=(0,y.useState)(new Set),[f,p]=(0,y.useState)(``),[m,h]=(0,y.useState)(``),[g,_]=(0,y.useState)(`id`),[v,b]=(0,y.useState)(!1),[x,S]=(0,y.useState)(`1`);(0,y.useEffect)(()=>{if(e){let e=new Set(n.map(e=>e.id));d(new Set(r.filter(t=>e.has(t)))),p(``),h(``),_(`id`),b(!1),S(`1`),l(null)}},[e]);let C=(0,y.useMemo)(()=>{let e=[...n];return g===`color`?(e.sort((e,t)=>{let n=L1e(e.rgba),r=L1e(t.rgba);return n[0]===r[0]?n[1]===r[1]?e.id-t.id:n[1]-r[1]:n[0]-r[0]}),e):(e.sort((e,t)=>e.id-t.id),e)},[n,g]),w=(0,y.useMemo)(()=>{let e=new Set;for(let t of C)t.material&&e.add(t.material.toUpperCase());return[...e].sort()},[C]),T=(0,y.useMemo)(()=>{let e=f.trim().toLowerCase();return C.filter(t=>!(m&&(t.material||``).toUpperCase()!==m||e&&!I1e(t).includes(e)))},[C,f,m,o]),E=T.length>0&&T.every(e=>u.has(e.id));if(!e)return null;let D=u.size,O=D===0,k=Number(x),A=Number.isInteger(k)&&k>=1&&k<=v9;function j(e){d(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})}function M(){d(e=>{let t=new Set(e);for(let e of T)t.add(e.id);return t})}function N(){d(e=>{let t=new Set(e);for(let e of T)t.delete(e.id);return t})}function P(){d(new Set)}async function F(e){if(O||c)return;let n=_9[e];if(n!==void 0&&(!A||k>n)){s(a(`inventory.labels.startingPositionRangeError`,`Starting position must be between 1 and {{capacity}} for this sheet.`,{capacity:n}),`error`);return}let r=C.filter(e=>u.has(e.id)).map(e=>e.id);l(e);try{M1e(i?await Z.printSpoolmanSpoolLabels({spool_ids:r,template:e,monochrome:v,starting_position:n===void 0?1:k}):await Z.printSpoolLabels({spool_ids:r,template:e,monochrome:v,starting_position:n===void 0?1:k})),t()}catch(e){s(a(`inventory.labels.error`,`Could not generate labels: {{msg}}`,{msg:e instanceof Error?e.message:String(e)}),`error`)}finally{l(null)}}return(0,G.jsxs)(`div`,{className:`fixed inset-0 z-50 flex items-start sm:items-center justify-center p-4 overflow-y-auto`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60 backdrop-blur-sm`,onClick:t}),(0,G.jsxs)(`div`,{"data-testid":`label-template-picker-panel`,className:`relative w-full max-w-3xl bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-2xl max-h-[90vh] overflow-clip flex flex-col my-auto`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Ll,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:a(`inventory.labels.title`,`Print spool labels`)}),D>0&&(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[`(`,a(`inventory.labels.selectedCount`,`{{count}} selected`,{count:D}),`)`]})]}),(0,G.jsx)(`button`,{onClick:t,className:`p-1 text-bambu-gray hover:text-white rounded transition-colors`,"aria-label":a(`common.close`,`Close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-2 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`}),(0,G.jsx)(`input`,{type:`search`,value:f,onChange:e=>p(e.target.value),placeholder:a(`inventory.labels.searchPlaceholder`,`Search name, brand, or #ID`),className:`w-full pl-9 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray focus:outline-none focus:border-bambu-green`})]}),w.length>1&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-1.5`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray mr-1`,children:a(`inventory.labels.filterByMaterial`,`Material:`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>h(``),className:`px-2 py-0.5 text-xs rounded-full border transition ${m===``?`bg-bambu-green text-bambu-dark border-bambu-green`:`bg-bambu-dark text-bambu-gray border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:a(`inventory.labels.allMaterials`,`All`)}),w.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>h(e),className:`px-2 py-0.5 text-xs rounded-full border transition ${m===e?`bg-bambu-green text-bambu-dark border-bambu-green`:`bg-bambu-dark text-bambu-gray border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:e},e))]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-1.5`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray mr-1`,children:a(`inventory.labels.sortBy.label`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>_(`id`),className:`px-2 py-0.5 text-xs rounded-full border transition ${g===`id`?`bg-bambu-green text-bambu-dark border-bambu-green`:`bg-bambu-dark text-bambu-gray border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:a(`inventory.labels.sortBy.id`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>_(`color`),className:`px-2 py-0.5 text-xs rounded-full border transition ${g===`color`?`bg-bambu-green text-bambu-dark border-bambu-green`:`bg-bambu-dark text-bambu-gray border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:a(`inventory.labels.sortBy.color`)})]})]}),(0,G.jsxs)(`div`,{className:`px-4 pt-3 pb-2 flex items-center justify-between gap-3 flex-wrap`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:a(`inventory.labels.pickSpools`,`Pick which spools to print labels for:`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3 text-xs`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:E?N:M,disabled:T.length===0,className:`text-bambu-green hover:underline disabled:opacity-50 disabled:no-underline disabled:cursor-not-allowed`,children:E?a(`inventory.labels.deselectVisible`,`Deselect visible`):a(`inventory.labels.selectVisible`,`Select all visible ({{count}})`,{count:T.length})}),(0,G.jsx)(`button`,{type:`button`,onClick:P,disabled:D===0,className:`text-bambu-gray hover:text-white hover:underline disabled:opacity-50 disabled:no-underline disabled:cursor-not-allowed`,children:a(`inventory.labels.clearAll`,`Clear all`)})]})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto px-2 pb-2 min-h-0`,children:T.length===0?(0,G.jsx)(`div`,{className:`text-center text-sm text-bambu-gray py-6`,children:C.length===0?a(`inventory.labels.noSpoolsToShow`,`No spools to show. Adjust your filter and try again.`):a(`inventory.labels.noMatches`,`No spools match the current search or filter.`)}):(0,G.jsx)(`ul`,{className:`space-y-0.5`,children:T.map(e=>{let t=u.has(e.id);return(0,G.jsx)(`li`,{children:(0,G.jsxs)(`label`,{className:`flex items-center gap-3 px-2 py-1.5 rounded hover:bg-bambu-dark-tertiary/50 cursor-pointer`,children:[t?(0,G.jsx)(_u,{className:`w-4 h-4 text-bambu-green shrink-0`}):(0,G.jsx)(yu,{className:`w-4 h-4 text-bambu-gray shrink-0`}),(0,G.jsx)(`input`,{type:`checkbox`,checked:t,onChange:()=>j(e.id),className:`sr-only`}),(0,G.jsx)(`span`,{className:`w-4 h-4 rounded border border-black/20 shrink-0`,style:N1e(e.rgba)}),(0,G.jsx)(`span`,{className:`flex-1 min-w-0 truncate text-sm text-white`,children:F1e(e)}),(0,G.jsxs)(`span`,{className:`text-xs font-mono text-bambu-gray shrink-0`,children:[`#`,e.id]})]})},e.id)})})}),(0,G.jsxs)(`div`,{className:`px-4 pt-2 pb-1 border-t border-bambu-dark-tertiary space-y-2`,children:[(0,G.jsxs)(`label`,{className:`inline-flex items-center gap-2 cursor-pointer select-none`,children:[v?(0,G.jsx)(_u,{className:`w-4 h-4 text-bambu-green shrink-0`}):(0,G.jsx)(yu,{className:`w-4 h-4 text-bambu-gray shrink-0`}),(0,G.jsx)(`input`,{type:`checkbox`,checked:v,onChange:e=>b(e.target.checked),className:`sr-only`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:a(`inventory.labels.monochrome`,`Monochrome (black & white printer)`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:a(`inventory.labels.monochromeHint`,`Drops the colour swatch and widens the text`)})]}),(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(`label`,{htmlFor:`label-starting-position`,className:`text-sm text-white whitespace-nowrap pt-1.5`,children:a(`inventory.labels.startingPosition`,`Starting label position`)}),(0,G.jsx)(`input`,{id:`label-starting-position`,"data-testid":`label-starting-position`,type:`number`,min:1,max:v9,step:1,value:x,onChange:e=>S(e.target.value),"aria-describedby":`label-starting-position-help`,className:`w-20 px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm focus:outline-none focus:border-bambu-green`}),(0,G.jsxs)(`div`,{id:`label-starting-position-help`,className:`text-xs text-bambu-gray pt-1.5`,children:[(0,G.jsx)(`div`,{children:a(`inventory.labels.startingPositionRange`,`Sheet templates only: L7160 supports 1–21; 5160 supports 1–30.`)}),(0,G.jsx)(`div`,{"data-testid":`label-starting-position-status`,className:A?``:`text-red-400`,children:A?k===1?a(`inventory.labels.startingPositionFirst`,`Printing starts at position 1.`):a(`inventory.labels.startingPositionSkipped`,`Positions 1 through {{lastPosition}} will be left blank on the first sheet.`,{lastPosition:k-1}):a(`inventory.labels.startingPositionInvalid`,`Enter a whole number from 1 to {{capacity}}.`,{capacity:v9})})]})]})]}),(0,G.jsx)(`div`,{className:`px-3 pt-1 pb-2 grid grid-cols-1 sm:grid-cols-2 gap-2`,children:j1e.map(e=>{let t=c===e.value,n=_9[e.value],r=n!==void 0&&(!A||k>n),i=a(`inventory.labels.templates.${e.i18nKey}.label`,e.fallbackLabel),o=r?a(`inventory.labels.startingPositionRangeError`,`Starting position must be between 1 and {{capacity}} for this sheet.`,{capacity:n}):a(`inventory.labels.templates.${e.i18nKey}.hint`,e.fallbackHint);return(0,G.jsxs)(`button`,{"data-testid":`print-labels-${e.value}`,disabled:O||c!==null||r,onClick:()=>F(e.value),title:`${i} — ${o}`,className:`w-full text-left p-2.5 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark hover:border-bambu-green hover:bg-bambu-green/10 disabled:opacity-50 disabled:cursor-not-allowed disabled:hover:border-bambu-dark-tertiary disabled:hover:bg-bambu-dark transition flex items-center gap-3`,children:[(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`div`,{className:`font-medium text-white text-sm truncate`,children:i}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mt-0.5 truncate`,children:o})]}),t&&(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin text-bambu-green shrink-0`})]},e.value)})}),(0,G.jsx)(`div`,{className:`flex justify-end gap-2 px-5 py-2 border-t border-bambu-dark-tertiary`,children:(0,G.jsx)(Q,{variant:`secondary`,onClick:t,disabled:c!==null,children:a(`common.cancel`,`Cancel`)})})]})]})}function z1e({onClose:e,onImported:t}){let{t:n}=U(),[r,i]=(0,y.useState)(null),[a,o]=(0,y.useState)(!1),[s,c]=(0,y.useState)(null),[l,u]=(0,y.useState)(!1),[d,f]=(0,y.useState)(!1),[p,m]=(0,y.useState)(null),h=(0,y.useRef)(null),g=async e=>{i(e),c(null),m(null),u(!0);try{c(await Z.importSpoolsCsvPreview(e))}catch(e){m(e instanceof Error?e.message:n(`inventory.csv.previewError`,`Could not read the CSV file`))}finally{u(!1)}},_=e=>{let t=e.target.files?.[0];t&&g(t)},v=e=>{e.preventDefault(),o(!1);let t=e.dataTransfer.files?.[0];t&&g(t)},b=async()=>{if(r){f(!0),m(null);try{t((await Z.importSpoolsCsv(r)).created)}catch(e){m(e instanceof Error?e.message:n(`inventory.csv.importError`,`Import failed`)),f(!1)}}},x=e=>e===`valid`?(0,G.jsx)(xs,{className:`w-4 h-4 text-green-500 flex-shrink-0`}):e===`error`?(0,G.jsx)(Ds,{className:`w-4 h-4 text-red-500 flex-shrink-0`}):(0,G.jsx)(ws,{className:`w-4 h-4 text-bambu-gray flex-shrink-0`}),S=s?.valid_count??0;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg w-full max-w-3xl border border-bambu-dark-tertiary flex flex-col max-h-[90vh]`,children:[(0,G.jsxs)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary flex items-center justify-between`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:n(`inventory.csv.modalTitle`,`Import spools from CSV`)}),(0,G.jsx)(`button`,{onClick:e,className:`p-1 hover:bg-bambu-dark rounded`,children:(0,G.jsx)(td,{className:`w-5 h-5 text-bambu-gray`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-4 overflow-y-auto flex-1`,children:[(0,G.jsxs)(`div`,{onDragOver:e=>{e.preventDefault(),o(!0)},onDragLeave:e=>{e.preventDefault(),o(!1)},onDrop:v,onClick:()=>h.current?.click(),className:`border-2 border-dashed rounded-lg p-6 text-center cursor-pointer transition-colors ${a?`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary hover:border-bambu-green/50`}`,children:[(0,G.jsx)(Bu,{className:`w-9 h-9 mx-auto mb-2 ${a?`text-bambu-green`:`text-bambu-gray`}`}),r?(0,G.jsxs)(`p`,{className:`text-white font-medium flex items-center justify-center gap-2`,children:[(0,G.jsx)(dc,{className:`w-4 h-4`}),` `,r.name]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:n(`inventory.csv.selectFile`,`Choose a CSV file or drag it here`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/70 mt-1`,children:n(`inventory.csv.dragHint`,`Header: material (required), brand, subtype, color_name, rgba, …`)})]})]}),(0,G.jsx)(`input`,{ref:h,type:`file`,accept:`.csv,text/csv`,className:`hidden`,onChange:_}),l&&(0,G.jsxs)(`div`,{className:`flex items-center justify-center gap-2 text-bambu-gray py-4`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),n(`inventory.csv.parsing`,`Reading file…`)]}),p&&(0,G.jsxs)(`div`,{className:`p-3 bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 rounded-lg flex items-start gap-3`,children:[(0,G.jsx)(Ds,{className:`w-5 h-5 text-red-600 dark:text-red-400 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`p`,{className:`text-sm text-red-700 dark:text-red-300 break-words`,children:p})]}),s&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-3 text-sm`,children:[(0,G.jsx)(`span`,{className:`px-2 py-1 rounded bg-green-50 dark:bg-green-500/10 text-green-700 dark:text-green-400`,children:n(`inventory.csv.validCount`,`{{count}} valid`,{count:s.valid_count})}),(0,G.jsx)(`span`,{className:`px-2 py-1 rounded bg-red-50 dark:bg-red-500/10 text-red-700 dark:text-red-400`,children:n(`inventory.csv.errorCount`,`{{count}} error`,{count:s.error_count})}),(0,G.jsx)(`span`,{className:`px-2 py-1 rounded bg-bambu-dark text-bambu-gray`,children:n(`inventory.csv.skippedCount`,`{{count}} skipped`,{count:s.skipped_count})})]}),s.warnings.length>0&&(0,G.jsx)(`div`,{className:`p-3 bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30 rounded-lg space-y-1`,children:s.warnings.map((e,t)=>(0,G.jsx)(`p`,{className:`text-xs text-yellow-700 dark:text-yellow-300`,children:e},t))}),s.rows.length>0&&(0,G.jsx)(`div`,{className:`border border-bambu-dark-tertiary rounded-lg overflow-hidden`,children:(0,G.jsx)(`div`,{className:`max-h-72 overflow-y-auto`,children:(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{className:`bg-bambu-dark sticky top-0`,children:(0,G.jsxs)(`tr`,{className:`text-left text-bambu-gray`,children:[(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium`,children:n(`inventory.csv.colRow`,`Row`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium`,children:n(`inventory.csv.colStatus`,`Status`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium`,children:n(`inventory.material`,`Material`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium`,children:n(`inventory.brand`,`Brand`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium`,children:n(`inventory.csv.colColor`,`Color`)})]})}),(0,G.jsx)(`tbody`,{children:s.rows.map(e=>(0,G.jsxs)(`tr`,{className:`border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(`td`,{className:`px-3 py-2 text-bambu-gray`,children:e.row_number}),(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[x(e.status),e.status===`error`&&e.reason&&(0,G.jsx)(`span`,{className:`text-xs text-red-700 dark:text-red-400 break-words`,children:e.reason})]})}),(0,G.jsx)(`td`,{className:`px-3 py-2 text-white`,children:e.material||`—`}),(0,G.jsx)(`td`,{className:`px-3 py-2 text-white`,children:e.brand||`—`}),(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[e.rgba&&(0,G.jsx)(`span`,{className:`inline-block w-4 h-4 rounded-full border border-bambu-dark-tertiary flex-shrink-0`,style:kf(e.rgba)}),(0,G.jsx)(`span`,{className:`text-white`,children:e.color_name||`—`}),e.resolved_color&&!e.cross_material_color&&(0,G.jsx)(`span`,{title:n(`inventory.csv.colorResolved`,`Color filled from catalog`),children:(0,G.jsx)(Ju,{className:`w-3.5 h-3.5 text-bambu-green flex-shrink-0`})}),e.cross_material_color&&(0,G.jsx)(`span`,{title:n(`inventory.csv.colorCrossMaterial`,`Color taken from a different material — no exact match in catalog`),children:(0,G.jsx)(Iu,{className:`w-3.5 h-3.5 text-yellow-500 flex-shrink-0`})}),e.duplicate_of_existing&&(0,G.jsx)(`span`,{title:n(`inventory.csv.duplicateExisting`,`A spool with this material, brand and color already exists — it will still be imported as a new spool`),children:(0,G.jsx)(Vs,{className:`w-3.5 h-3.5 text-amber-600 dark:text-amber-400 flex-shrink-0`})})]})})]},e.row_number))})]})})})]})]}),(0,G.jsxs)(`div`,{className:`p-4 border-t border-bambu-dark-tertiary flex justify-end gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:e,disabled:d,children:n(`common.cancel`)}),(0,G.jsx)(Q,{onClick:b,disabled:!s||S===0||d,children:d?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 mr-2 animate-spin`}),n(`inventory.csv.importing`,`Importing…`)]}):S>0?n(`inventory.csv.importValidRows`,`Import {{count}} valid rows`,{count:S}):n(`inventory.csv.noValidRows`,`No valid rows`)})]})]})})}var y9=[{id:`material`,type:`searchable`,labelKey:`inventory.material`},{id:`subtype`,type:`searchable`,labelKey:`inventory.subtype`},{id:`brand`,type:`searchable`,labelKey:`inventory.brand`},{id:`color_name`,type:`text`,labelKey:`inventory.colorName`},{id:`rgba`,type:`color`,labelKey:`inventory.color`,pattern:`^[0-9A-Fa-f]{6}([0-9A-Fa-f]{2})?$`},{id:`location_id`,type:`searchableClosed`,labelKey:`inventory.storageLocation`},{id:`slicer_filament_name`,type:`searchable`,labelKey:`inventory.slicerFilamentName`},{id:`slicer_filament`,type:`searchable`,labelKey:`inventory.slicerFilament`},{id:`cost_per_kg`,type:`number`,labelKey:`inventory.costPerKg`,min:0,step:.01},{id:`note`,type:`textarea`,labelKey:`inventory.note`},{id:`label_weight`,type:`number`,labelKey:`inventory.labelWeight`,min:1,step:1},{id:`core_weight`,type:`number`,labelKey:`inventory.coreWeight`,min:0,step:1},{id:`category`,type:`searchable`,labelKey:`inventory.category`},{id:`low_stock_threshold_pct`,type:`number`,labelKey:`inventory.lowStockThresholdOverride`,min:1,max:99,step:1}];function B1e({value:e,onChange:t,options:n,allowCustom:r,placeholderKey:i,disabled:a}){let{t:o}=U(),s=(0,y.useRef)(null),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(``);(0,y.useEffect)(()=>{if(!c)return;let e=e=>{s.current&&!s.current.contains(e.target)&&(l(!1),d(``))},t=e=>{e.key===`Escape`&&(l(!1),d(``))};return document.addEventListener(`mousedown`,e),document.addEventListener(`keydown`,t),()=>{document.removeEventListener(`mousedown`,e),document.removeEventListener(`keydown`,t)}},[c]);let f=c?u:n.find(t=>t.value===e)?.label??e,p=(0,y.useMemo)(()=>{if(!c)return n;let e=u.trim().toLowerCase();return e?n.filter(t=>t.label.toLowerCase().includes(e)||t.value.toLowerCase().includes(e)):n},[c,u,n]),m=c&&u.trim()&&!n.some(e=>e.value.toLowerCase()===u.trim().toLowerCase());return(0,G.jsxs)(`div`,{className:`relative`,ref:s,children:[(0,G.jsx)(`input`,{type:`text`,disabled:a,value:f,onChange:e=>{d(e.target.value),l(!0),r&&t(e.target.value)},onFocus:()=>{l(!0),d(``)},placeholder:i?o(i):void 0,className:`w-full px-3 py-2 pr-9 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray/50 focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray/50 pointer-events-none`}),c&&(0,G.jsxs)(`div`,{className:`absolute z-50 left-0 right-0 mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg max-h-64 overflow-y-auto`,children:[p.length===0&&!r&&(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:o(`inventory.noResults`)}),p.map(n=>(0,G.jsx)(`button`,{type:`button`,className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary ${e===n.value?`bg-bambu-green/10 text-bambu-green`:`text-white`}`,onClick:()=>{t(n.value),l(!1),d(``)},children:n.label},n.value)),r&&m&&(0,G.jsx)(`button`,{type:`button`,className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary text-bambu-green border-t border-bambu-dark-tertiary`,onClick:()=>{t(u.trim()),l(!1),d(``)},children:o(`inventory.bulk.useCustom`,{value:u.trim()})})]})]})}function b9(...e){let t=new Set;for(let n of e)for(let e of n){let n=e?.trim();n&&t.add(n)}return Array.from(t).sort((e,t)=>e.localeCompare(t))}function V1e({isOpen:e,selectedCount:t,isPending:n,availableLocations:r,availableMaterials:i,availableSubtypes:a,availableBrands:o,availableCategories:s,availableSlicerFilaments:c,availableSlicerFilamentNames:l,onClose:u,onApply:d}){let{t:f}=U(),{data:p=[]}=K({queryKey:[`bulk-edit-cloud-presets`],enabled:e,staleTime:300*1e3,queryFn:async()=>{let e=[];try{if((await Z.getCloudStatus()).is_authenticated){let t=await Z.getFilamentPresets();e.push(...t)}}catch{}try{if((await Z.orcaCloudStatus()).connected){let t=await Z.orcaCloudListProfiles();e.push(...t.filament)}}catch{}return e}}),{data:m}=K({queryKey:[`bulk-edit-local-presets`],enabled:e,staleTime:300*1e3,queryFn:Z.getLocalPresets}),{data:h=[]}=K({queryKey:[`builtin-filaments`],enabled:e,staleTime:300*1e3,queryFn:Z.getBuiltinFilaments}),g=(0,y.useMemo)(()=>YU(p,new Set,m?.filament??[],h),[p,m,h]),[_,v]=(0,y.useState)({}),b=(0,y.useMemo)(()=>b9(zU,i).map(e=>({value:e,label:e})),[i]),x=(0,y.useMemo)(()=>b9(VU,a).map(e=>({value:e,label:e})),[a]),S=(0,y.useMemo)(()=>b9(BU,o).map(e=>({value:e,label:e})),[o]),C=(0,y.useMemo)(()=>b9(s).map(e=>({value:e,label:e})),[s]),w=(0,y.useMemo)(()=>{let e=g.map(e=>({value:e.code,label:e.displayName})),t=c.filter(t=>!e.some(e=>e.value===t)).map(e=>({value:e,label:e}));return[...e,...t].sort((e,t)=>e.label.localeCompare(t.label))},[g,c]),T=(0,y.useMemo)(()=>{let e=g.map(e=>({value:e.displayName,label:e.displayName})),t=l.filter(t=>!e.some(e=>e.value===t)).map(e=>({value:e,label:e}));return[...e,...t].sort((e,t)=>e.label.localeCompare(t.label))},[g,l]),E=(0,y.useMemo)(()=>r.map(e=>({value:String(e.id),label:e.name})),[r]);if(!e)return null;let D=(e,t)=>{v(n=>({...n,[e]:t}))},O=e=>{v(t=>{let n={...t};return delete n[e],n})},k=(()=>{let e={};for(let t of y9){let n=_[t.id];if(n===void 0)continue;let r=typeof n==`string`?n.trim():n;if(!(r===``||r===null))if(t.type===`number`){let n=Number(r);Number.isFinite(n)&&(e[t.id]=n)}else if(t.id===`location_id`){let n=Number(r);Number.isFinite(n)&&n>0&&(e[t.id]=n)}else if(t.id===`rgba`){let n=String(r).replace(/^#/,``),i=n.length===6?`${n}FF`:n;/^[0-9A-Fa-f]{8}$/.test(i)&&(e[t.id]=i.toUpperCase())}else e[t.id]=String(r)}return e})(),A=Object.keys(k).length>0,j=y9.some(e=>{let t=_[e.id];return t===void 0||t.trim()===``?!1:k[e.id]===void 0}),M=e=>e===`material`?b:e===`subtype`?x:e===`brand`?S:e===`category`?C:e===`slicer_filament`?w:e===`slicer_filament_name`?T:e===`location_id`?E:[],N=e=>{let t=_[e.id]??``;if(e.type===`searchable`||e.type===`searchableClosed`)return(0,G.jsx)(B1e,{value:t,onChange:t=>{t===``?O(e.id):D(e.id,t)},options:M(e.id),allowCustom:e.type===`searchable`,disabled:n});if(e.type===`textarea`)return(0,G.jsx)(`textarea`,{disabled:n,value:t,onChange:t=>D(e.id,t.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray/50 focus:border-bambu-green focus:outline-none resize-none min-h-[60px]`});if(e.type===`color`){let r=t.trim().replace(/^#/,``),i=r.length===6?`${r}FF`:r,a=t.trim()!==``&&!/^[0-9A-Fa-f]{8}$/.test(i);return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`color`,disabled:n,value:`#${(t||`808080`).replace(/^#/,``).slice(0,6)}`,onChange:t=>D(e.id,t.target.value.replace(/^#/,``).toUpperCase()),className:`h-9 w-12 rounded cursor-pointer`}),(0,G.jsx)(`input`,{type:`text`,disabled:n,value:t,onChange:t=>D(e.id,t.target.value.replace(/^#/,``).toUpperCase()),placeholder:`RRGGBB or RRGGBBAA`,className:`flex-1 px-3 py-2 bg-bambu-dark border rounded-lg text-white placeholder-bambu-gray/50 focus:outline-none ${a?`border-red-500 focus:border-red-500`:`border-bambu-dark-tertiary focus:border-bambu-green`}`,pattern:e.pattern})]}),a&&(0,G.jsx)(`p`,{className:`mt-1 text-xs text-red-600 dark:text-red-400`,children:f(`inventory.bulk.invalidHex`)})]})}return(0,G.jsx)(`input`,{type:e.type===`number`?`number`:`text`,disabled:n,value:t,onChange:t=>D(e.id,t.target.value),min:e.min,max:e.max,step:e.step,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray/50 focus:border-bambu-green focus:outline-none`})};return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center p-4 z-50`,onClick:n?void 0:u,children:(0,G.jsxs)(`div`,{className:`w-full max-w-3xl bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg max-h-[90vh] flex flex-col`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-5 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:f(`inventory.bulk.editTitle`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-0.5`,children:f(`inventory.bulk.editSubtitle`,{count:t})})]}),(0,G.jsx)(`button`,{onClick:u,disabled:n,className:`p-1 text-bambu-gray hover:text-white transition-colors`,"aria-label":f(`common.close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(`p`,{className:`px-5 pt-4 text-xs text-bambu-gray`,children:f(`inventory.bulk.editHint`)}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto p-5 space-y-3`,children:y9.map(e=>{let t=_[e.id]!==void 0;return(0,G.jsxs)(`div`,{className:`flex items-start gap-3 rounded-md p-2 transition-colors ${t?`bg-bambu-green/5 border border-bambu-green/30`:`border border-transparent`}`,children:[(0,G.jsx)(`div`,{className:`pt-2`,children:(0,G.jsx)(`input`,{type:`checkbox`,className:`h-4 w-4 cursor-pointer`,checked:t,onChange:t=>{t.target.checked?D(e.id,``):O(e.id)},"aria-label":f(`inventory.bulk.toggleField`)})}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:f(e.labelKey)}),N(e)]})]},e.id)})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3 p-5 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:f(`inventory.bulk.changeCount`,{count:Object.keys(k).length})}),(0,G.jsxs)(`div`,{className:`ml-auto flex gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:u,disabled:n,children:f(`common.cancel`)}),(0,G.jsx)(Q,{onClick:()=>d(k),disabled:!A||n||j,children:n?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 mr-2 animate-spin`}),f(`inventory.bulk.applyPending`)]}):f(`inventory.bulk.applyButton`,{count:t})})]})]})]})})}function H1e(e){let t=e[0],n=0,r=0,i=0;for(let t of e)n+=t.label_weight,r+=t.weight_used,i+=t.core_weight;return{...t,label_weight:n,weight_used:r,core_weight:i}}function x9(e){let t=new Set;for(let n of e)if(typeof n==`string`){let e=n.trim();e&&t.add(e)}return Array.from(t).sort((e,t)=>e.localeCompare(t))}function U1e(e){return`${e.material}|${e.subtype||``}|${e.brand||``}|${e.color_name||``}|${e.rgba||``}|${e.extra_colors||``}|${e.effect_type||``}|${e.label_weight}`}var W1e=`bambuddy-inventory-columns`,S9=[{id:`id`,label:`#`,visible:!0},{id:`added_time`,label:`Added`,visible:!0},{id:`encode_time`,label:`Encoded`,visible:!1},{id:`last_used_time`,label:`Last Used`,visible:!1},{id:`rgba`,label:`Color`,visible:!0},{id:`material`,label:`Material`,visible:!0},{id:`subtype`,label:`Subtype`,visible:!0},{id:`color_name`,label:`Color Name`,visible:!1},{id:`brand`,label:`Brand`,visible:!0},{id:`slicer_filament`,label:`Slicer Filament`,visible:!1},{id:`location`,label:`Location`,visible:!0},{id:`storage_location`,label:`Storage Location`,visible:!1},{id:`temperature`,label:`Temperature`,visible:!1},{id:`humidity`,label:`Humidity`,visible:!1},{id:`battery`,label:`Battery`,visible:!1},{id:`label_weight`,label:`Label`,visible:!0},{id:`net`,label:`Net`,visible:!0},{id:`gross`,label:`Gross`,visible:!1},{id:`added_full`,label:`Full`,visible:!1},{id:`used`,label:`Used`,visible:!1},{id:`printed_total`,label:`Printed Total`,visible:!1},{id:`printed_since_weight`,label:`Printed Since Weight`,visible:!1},{id:`note`,label:`Note`,visible:!1},{id:`pa_k`,label:`PA(K)`,visible:!0},{id:`tag_id`,label:`Tag ID`,visible:!1},{id:`data_origin`,label:`Data Origin`,visible:!1},{id:`tag_type`,label:`Linked Tag Type`,visible:!1},{id:`stock`,label:`Stock`,visible:!1},{id:`remaining`,label:`Remaining`,visible:!0},{id:`spool_name`,label:`Spool`,visible:!1},{id:`cost_per_kg`,label:`Cost/kg`,visible:!1},{id:`weight_check`,label:`Weight Check`,visible:!1}];function G1e(){try{let e=localStorage.getItem(W1e);if(e){let t=JSON.parse(e),n=new Set(S9.map(e=>e.id)),r=new Set(t.map(e=>e.id)),i=[...t.filter(e=>n.has(e.id))];for(let e of S9){if(r.has(e.id))continue;let t=S9.indexOf(e),n=i.length;for(let e=t-1;e>=0;e--){let t=i.findIndex(t=>t.id===S9[e].id);if(t!==-1){n=t+1;break}}i.splice(n,0,e)}return i}}catch{}return S9.map(e=>({...e}))}function K1e(e){try{localStorage.setItem(W1e,JSON.stringify(e))}catch{}}function C9(e,t=!1){return t&&e>=1e3?`${(e/1e3).toFixed(1)}kg`:`${Math.round(e)}g`}var q1e={PLA:`bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-400`,ABS:`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`,PETG:`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`,TPU:`bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-400`,ASA:`bg-orange-100 dark:bg-orange-500/20 text-orange-700 dark:text-orange-400`,PA:`bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`,PC:`bg-cyan-100 dark:bg-cyan-500/20 text-cyan-700 dark:text-cyan-400`,PET:`bg-sky-100 dark:bg-sky-500/20 text-sky-700 dark:text-sky-400`};function w9(e,t=`system`){if(!e)return`-`;let n=ep(e);return n?Kf(n,t):`-`}var J1e={id:()=>`#`,added_time:()=>`Added`,encode_time:()=>`Encoded`,last_used_time:()=>`Last Used`,rgba:e=>e(`inventory.color`),material:e=>e(`inventory.material`),subtype:e=>e(`inventory.subtype`),color_name:e=>e(`inventory.colorName`),brand:e=>e(`inventory.brand`),slicer_filament:e=>e(`inventory.slicerFilament`),location:()=>`Location`,storage_location:e=>e(`inventory.storageLocation`),temperature:e=>e(`inventory.temperature`),humidity:e=>e(`inventory.humidity`),battery:e=>e(`inventory.battery`),label_weight:e=>e(`inventory.labelWeight`),net:e=>e(`inventory.net`),gross:()=>`Gross`,added_full:()=>`Full`,used:e=>e(`inventory.weightUsed`),printed_total:()=>`Printed Total`,printed_since_weight:()=>`Printed Since Weight`,note:e=>e(`inventory.note`),pa_k:()=>`PA(K)`,tag_id:()=>`Tag ID`,data_origin:()=>`Data Origin`,tag_type:()=>`Linked Tag Type`,stock:e=>e(`inventory.stock`),remaining:e=>e(`inventory.remaining`),spool_name:e=>e(`inventory.spoolName`),cost_per_kg:e=>e(`inventory.costPerKg`),weight_check:e=>e(`inventory.weightCheck`)},T9={id:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm font-medium text-white`,children:e.id}),added_time:({spool:e,dateFormat:t})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:w9(e.created_at,t)}),encode_time:({spool:e,dateFormat:t})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:w9(e.encode_time,t)}),last_used_time:({spool:e,dateFormat:t})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.last_used?w9(e.last_used,t):`Never`}),rgba:({spool:e})=>(0,G.jsx)(`div`,{className:`flex items-center justify-center`,children:(0,G.jsx)($8,{rgba:e.rgba,extraColors:e.extra_colors,effectType:e.effect_type,effectSize:`table`,subtype:e.subtype})}),material:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-white`,children:e.material}),subtype:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.subtype||`-`}),color_name:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:Ef(e.color_name,e.rgba,e.color_name_is_synthesized)||`-`}),brand:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.brand||`-`}),slicer_filament:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,title:e.slicer_filament||void 0,children:e.slicer_filament_name||e.slicer_filament||`-`}),location:({spool:e,assignmentMap:t})=>{let n=t[e.id];if(!n)return(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:`-`});let r=n.printer_name||`Printer ${n.printer_id}`,i=n.ams_id===254||n.ams_id===255,a=!i&&n.ams_id>=128;return(0,G.jsxs)(`span`,{className:`inline-flex items-center px-1.5 py-0.5 rounded text-xs font-medium bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-400`,children:[r,` `,Op(n.ams_id,n.tray_id,a,i),n.ams_label?` (${n.ams_label})`:``]})},storage_location:({spool:e})=>e.storage_location?(0,G.jsx)(`span`,{className:`inline-flex items-center px-1.5 py-0.5 rounded text-xs font-medium bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`,children:e.storage_location}):(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:`-`}),temperature:({spool:e,locationReadingsMap:t,t:n,colorizeLocationSensors:r,locationSensorAboveColor:i,locationSensorBelowColor:a,locationSensorOptimalColor:o})=>{let s=e.location_id?t[e.location_id]?.find(e=>e.device_class===`temperature`):void 0;return s?(0,G.jsx)(`span`,{title:s.name,className:`text-sm ${k9(s,r,i,a,o)}`,children:O9(s,n)}):(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray/50`,children:`-`})},humidity:({spool:e,locationReadingsMap:t,t:n,colorizeLocationSensors:r,locationSensorAboveColor:i,locationSensorBelowColor:a,locationSensorOptimalColor:o})=>{let s=e.location_id?t[e.location_id]?.find(e=>e.device_class===`humidity`):void 0;return s?(0,G.jsx)(`span`,{title:s.name,className:`text-sm ${k9(s,r,i,a,o)}`,children:O9(s,n)}):(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray/50`,children:`-`})},battery:({spool:e,locationReadingsMap:t,t:n,colorizeLocationSensors:r,locationSensorAboveColor:i,locationSensorBelowColor:a,locationSensorOptimalColor:o})=>{let s=e.location_id?t[e.location_id]?.find(e=>e.device_class===`battery`):void 0;return s?(0,G.jsx)(`span`,{title:s.name,className:`text-sm ${k9(s,r,i,a,o)}`,children:O9(s,n)}):(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray/50`,children:`-`})},label_weight:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-white`,children:C9(e.label_weight)}),net:({remaining:e})=>(0,G.jsx)(`span`,{className:`text-sm text-white`,children:C9(e)}),gross:({spool:e,remaining:t})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:C9(t+e.core_weight)}),added_full:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.added_full==null?`-`:e.added_full?`Yes`:`No`}),used:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.weight_used>0?C9(e.weight_used):`-`}),printed_total:()=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray/50`,children:`-`}),printed_since_weight:()=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray/50`,children:`-`}),note:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray max-w-[150px] truncate block`,title:e.note||void 0,children:e.note||`-`}),pa_k:({spool:e})=>(e.k_profiles?.length??0)===0?(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:`-`}):(0,G.jsx)(`span`,{className:`inline-flex items-center px-1.5 py-0.5 rounded text-xs font-medium bg-bambu-green/20 text-bambu-green`,children:`K`}),tag_id:({spool:e})=>{let t=e.tag_uid||e.tray_uuid;return t?(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray font-mono`,title:t,children:t.length>12?`${t.slice(0,6)}...${t.slice(-4)}`:t}):(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray/50`,children:`-`})},data_origin:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.data_origin||`-`}),tag_type:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.tag_type||`-`}),stock:({spool:e,t})=>e.slicer_filament?(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:`-`}):(0,G.jsx)(`span`,{className:`inline-flex items-center px-1.5 py-0.5 rounded text-xs font-medium bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400`,children:t(`inventory.stock`)}),remaining:({remaining:e,pct:t})=>(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`div`,{className:`flex-1 h-2 bg-bambu-dark-tertiary rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full ${t>50?`bg-bambu-green`:t>20?`bg-yellow-500`:`bg-red-500`}`,style:{width:`${Math.min(t,100)}%`}})}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray min-w-[40px] text-right`,children:[Math.round(e),`g`]})]}),spool_name:({spool:e,catalogMap:t})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:(e.core_weight_catalog_id==null?void 0:t[e.core_weight_catalog_id])?.name||`-`}),cost_per_kg:({spool:e,currencySymbol:t})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.cost_per_kg==null?`-`:`${t}${e.cost_per_kg.toFixed(2)}`}),weight_check:({spool:e,onSyncWeight:t})=>{let n=e.last_scale_weight;if(n==null)return(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray/50`,title:`No scale measurement`,children:`-`});let r=e.core_weight||0,i=Math.max(0,e.label_weight-e.weight_used)+r,a,o;n<r?(a=n-r,o=!0):(a=n-i,o=Math.abs(a)<=50);let s=a>0?`+${Math.round(a)}`:`${Math.round(a)}`,c=o?`Scale: ${Math.round(n)}g\nCalculated: ${Math.round(i)}g\nDifference: ${s}g (within tolerance)`:`Scale: ${Math.round(n)}g\nCalculated: ${Math.round(i)}g\nDifference: ${s}g (mismatch!)`;return(0,G.jsxs)(`div`,{className:`flex items-center gap-1 text-sm font-medium ${o?`text-green-700 dark:text-green-400`:`text-yellow-700 dark:text-yellow-400`}`,title:c,children:[(0,G.jsxs)(`span`,{children:[Math.round(n),`g`]}),o?(0,G.jsx)(fs,{className:`w-3 h-3`}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Iu,{className:`w-3 h-3`}),t&&(0,G.jsx)(`button`,{type:`button`,onClick:n=>{n.stopPropagation(),n.preventDefault(),t(e)},className:`p-1 hover:bg-bambu-green/20 rounded transition-colors text-bambu-green`,title:`Sync: trust scale weight and reset tracking`,children:(0,G.jsx)(Vl,{className:`w-3.5 h-3.5`})})]})]})}},E9={id:e=>e.id,added_time:e=>e.created_at||``,encode_time:e=>e.encode_time||``,last_used_time:e=>e.last_used||``,material:e=>(e.material||``).toLowerCase(),subtype:e=>(e.subtype||``).toLowerCase(),color_name:e=>(e.color_name||``).toLowerCase(),rgba:e=>wf(e.rgba),brand:e=>(e.brand||``).toLowerCase(),slicer_filament:e=>(e.slicer_filament_name||e.slicer_filament||``).toLowerCase(),location:(e,t)=>{let n=t[e.id];if(!n)return``;let r=n.ams_id===254||n.ams_id===255,i=!r&&n.ams_id>=128,a=n.ams_label?` (${n.ams_label})`:``;return`${n.printer_name||``} ${Op(n.ams_id,n.tray_id,i,r)}${a}`},storage_location:e=>(e.storage_location||``).toLowerCase(),label_weight:e=>e.label_weight,net:e=>Math.max(0,e.label_weight-e.weight_used),gross:e=>Math.max(0,e.label_weight-e.weight_used)+e.core_weight,used:e=>e.weight_used,remaining:e=>e.label_weight>0?Math.max(0,e.label_weight-e.weight_used)/e.label_weight:0,note:e=>(e.note||``).toLowerCase(),data_origin:e=>(e.data_origin||``).toLowerCase(),tag_type:e=>(e.tag_type||``).toLowerCase(),stock:e=>+!!e.slicer_filament,spool_name:e=>e.core_weight_catalog_id??0,cost_per_kg:e=>e.cost_per_kg??0,weight_check:e=>{if(e.last_scale_weight==null)return-1;let t=Math.max(0,e.label_weight-e.weight_used)+e.core_weight;return Math.abs(e.last_scale_weight-t)},temperature:(e,t,n)=>(e.location_id?n[e.location_id]:void 0)?.find(e=>e.device_class===`temperature`)?.value??-1/0,humidity:(e,t,n)=>(e.location_id?n[e.location_id]:void 0)?.find(e=>e.device_class===`humidity`)?.value??-1/0,battery:(e,t,n)=>(e.location_id?n[e.location_id]:void 0)?.find(e=>e.device_class===`battery`)?.value??-1/0},D9=`bambuddy-inventory-sort`;function Y1e(){try{let e=localStorage.getItem(D9);if(e)return JSON.parse(e)}catch{}return null}function X1e(e){try{e?localStorage.setItem(D9,JSON.stringify(e)):localStorage.removeItem(D9)}catch{}}function Z1e(){let{data:e}=K({queryKey:[`spoolman-settings`],queryFn:Z.getSpoolmanSettings,staleTime:300*1e3}),t=e!==void 0;return(0,G.jsx)(Q1e,{spoolmanMode:e?.spoolman_enabled===`true`&&!!e?.spoolman_url,spoolmanModeReady:t})}function Q1e({spoolmanMode:e=!1,spoolmanModeReady:t=!0}){let{t:n}=U(),r=Mf(),i=co(),{showToast:a}=Gd(),{hasPermission:o,loading:s}=jd(),c=!s&&o(`inventory:forecast_read`),[l,u]=Ri(),[d,f]=(0,y.useState)(null),p=(0,y.useRef)(!1),[m,h]=(0,y.useState)(null),[g,_]=(0,y.useState)(null),[v,b]=(0,y.useState)(!1),[x,S]=(0,y.useState)(!1),[C,w]=(0,y.useState)(!1),[T,E]=(0,y.useState)(`active`),[D,O]=(0,y.useState)(`all`),[k,A]=(0,y.useState)(``),[j,M]=(0,y.useState)(``),[N,P]=(0,y.useState)(``),[F,I]=(0,y.useState)(``),[L,R]=(0,y.useState)(`all`),[z,B]=(0,y.useState)(``),[V,ee]=(0,y.useState)(`table`),[te,ne]=(0,y.useState)(Y1e),[re,ie]=(0,y.useState)(G1e),[ae,oe]=(0,y.useState)(!1),[se,H]=(0,y.useState)(()=>{try{return localStorage.getItem(`bambuddy-inventory-group`)===`true`}catch{return!1}}),[ce,le]=(0,y.useState)(new Set),[ue,de]=(0,y.useState)(new Set),[fe,pe]=(0,y.useState)(!1),[me,he]=(0,y.useState)(null),ge=(0,y.useCallback)(e=>{de(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},[]),_e=(0,y.useCallback)(()=>de(new Set),[]);(0,y.useEffect)(()=>{de(new Set)},[T,D,k,j,N,F,L,z]);let[ve,ye]=(0,y.useState)(0),[be,xe]=(0,y.useState)(()=>{try{let e=localStorage.getItem(`bambuddy-inventory-pageSize`);if(e){let t=Number(e);if([15,30,50,100,-1].includes(t))return t}}catch{}return 15}),{data:Se}=K({queryKey:[`settings`],queryFn:Z.getSettings}),Ce=Se?.date_format||`system`,we=(Se?.location_sensor_poll_interval||120)*1e3,{colorize:Te,aboveColor:Ee,belowColor:De,optimalColor:Oe}=CUe(),ke=e?[`spoolman-inventory-spools`]:[`inventory-spools`],Ae=()=>w8(i,ke),{data:je,isLoading:Me}=K({queryKey:ke,queryFn:()=>e?Z.getSpoolmanInventorySpools(!0):Z.getSpools(!0),refetchInterval:3e4}),Ne=(0,y.useCallback)(async()=>{S(!0);try{await Z.exportSpoolsCsv()}catch(e){a(e instanceof Error?e.message:n(`inventory.csv.exportError`,`Export failed`),`error`)}finally{S(!1)}},[a,n]),Pe=e?n(`inventory.csv.spoolmanHint`,`In Spoolman mode, use Spoolman's built-in CSV import/export.`):void 0,{data:Fe=[]}=K({queryKey:S8,queryFn:Z.getLocations}),Ie=l.get(`location_id`),Le=Ie===`__none__`?`__none__`:Ie&&/^\d+$/.test(Ie)&&Number(Ie)>0?Ie:``,Re=l.get(`spool`),ze=Re&&/^\d+$/.test(Re)&&Number(Re)>0?Number(Re):null,Be=je?.find(e=>e.id===ze)??null,Ve=(0,y.useCallback)(()=>{p.current=!0,u(e=>(e.delete(`spool`),e),{replace:!0})},[u]),{data:He,isError:Ue,error:We}=K({queryKey:e?[`spoolman-inventory-spool`,ze]:[`inventory-spool`,ze],queryFn:()=>e?Z.getSpoolmanInventorySpool(ze):Z.getSpool(ze),enabled:t&&ze!==null&&Be===null,staleTime:1/0,retry:(e,t)=>e<2&&!(t instanceof od&&t.status===404)});(0,y.useEffect)(()=>{if(!p.current){if(t&&ze&&Be){Ve(),f({spool:Be,mode:`edit`});return}if(He){Ve(),f({spool:He,mode:`edit`});return}Ue&&(Ve(),a(n(We instanceof od&&We.status===404?`inventory.deepLinkSpoolNotFound`:`inventory.deepLinkFetchFailed`),`error`))}},[t,ze,Be,He,Ue,We,Ve,a,n]);let{data:Ge}=K({queryKey:[`spool-assignments`],queryFn:()=>Z.getAssignments(),refetchInterval:3e4}),{data:Ke=[],isError:qe}=K({queryKey:[`spoolman-slot-assignments-all`],queryFn:()=>Z.getSpoolmanSlotAssignments(),enabled:e,refetchInterval:3e4,staleTime:1e4,retry:1}),Je=(0,y.useRef)(!1);(0,y.useEffect)(()=>{qe&&!Je.current?(Je.current=!0,a(n(`inventory.spoolmanUnreachable`),`error`)):qe||(Je.current=!1)},[qe,a,n]);let{data:Ye}=K({queryKey:[`spool-catalog`],queryFn:()=>Z.getSpoolCatalog()}),Xe=q({mutationFn:t=>e?Z.deleteSpoolmanInventorySpool(t):Z.deleteSpool(t),onSuccess:()=>{Ae(),a(n(`inventory.spoolDeleted`),`success`)},onError:e=>{e instanceof od&&e.status===404?a(n(`inventory.deleteSpoolNotFound`),`error`):e instanceof od&&e.status===503?a(n(`inventory.spoolmanUnreachable`),`error`):a(n(`inventory.deleteFailed`),`error`)}}),Ze=q({mutationFn:t=>e?Z.archiveSpoolmanInventorySpool(t):Z.archiveSpool(t),onSuccess:()=>{Ae(),a(n(`inventory.spoolArchived`),`success`)},onError:e=>{e instanceof od&&e.status===404?a(n(`inventory.archiveSpoolNotFound`),`error`):e instanceof od&&e.status===503?a(n(`inventory.spoolmanUnreachable`),`error`):a(n(`inventory.archiveFailed`),`error`)}}),Qe=q({mutationFn:t=>e?Z.restoreSpoolmanInventorySpool(t):Z.restoreSpool(t),onSuccess:()=>{Ae(),a(n(`inventory.spoolRestored`),`success`)},onError:e=>{e instanceof od&&e.status===404?a(n(`inventory.restoreSpoolNotFound`),`error`):e instanceof od&&e.status===503?a(n(`inventory.spoolmanUnreachable`),`error`):a(n(`inventory.restoreFailed`),`error`)}}),$e=q({mutationFn:t=>e?Z.resetSpoolmanInventorySpoolConsumedCounter(t):Z.resetSpoolConsumedCounter(t),onSuccess:()=>{i.invalidateQueries({queryKey:ke}),a(n(`inventory.consumedCounterReset`),`success`)},onError:()=>{a(n(`inventory.resetConsumedCounterFailed`),`error`)}}),et=q({mutationFn:t=>e?Z.bulkResetSpoolmanInventorySpoolConsumedCounter(t):Z.bulkResetSpoolConsumedCounter(t),onSuccess:e=>{i.invalidateQueries({queryKey:ke}),a(n(`inventory.allConsumedCountersReset`,{count:e.reset}),`success`),he(null),_e()},onError:()=>{a(n(`inventory.resetConsumedCounterFailed`),`error`)}}),tt=e=>(e.not_found?.length??0)+(e.errors?.length??0),nt=q({mutationFn:async({ids:t,update:n})=>e?Z.bulkUpdateSpoolmanInventorySpools(t,n):Z.bulkUpdateSpools(t,n),onSuccess:e=>{Ae();let t=tt(e);if(e.updated===0){a(n(`inventory.bulk.updateAllFailed`,{count:t}),`error`);return}t>0?a(n(`inventory.bulk.updatePartial`,{ok:e.updated,failed:t}),`warning`):a(n(`inventory.bulk.updateSuccess`,{count:e.updated}),`success`),pe(!1),_e()},onError:e=>{a(e.message||n(`inventory.bulk.updateFailed`),`error`)}}),rt=q({mutationFn:async t=>e?Z.bulkDeleteSpoolmanInventorySpools(t):Z.bulkDeleteSpools(t),onSuccess:e=>{Ae();let t=tt(e);if(e.deleted===0){a(n(`inventory.bulk.deleteAllFailed`,{count:t}),`error`);return}t>0?a(n(`inventory.bulk.deletePartial`,{ok:e.deleted,failed:t}),`warning`):a(n(`inventory.bulk.deleteSuccess`,{count:e.deleted}),`success`),he(null),_e()},onError:e=>{a(e.message||n(`inventory.bulk.deleteFailed`),`error`)}}),it=q({mutationFn:async t=>e?Z.bulkArchiveSpoolmanInventorySpools(t):Z.bulkArchiveSpools(t),onSuccess:e=>{Ae();let t=tt(e);if(e.archived===0&&t>0){a(n(`inventory.bulk.archiveAllFailed`,{count:t}),`error`);return}t>0?a(n(`inventory.bulk.archivePartial`,{ok:e.archived,failed:t}),`warning`):a(n(`inventory.bulk.archiveSuccess`,{count:e.archived}),`success`),he(null),_e()},onError:e=>{a(e.message||n(`inventory.bulk.archiveFailed`),`error`)}}),at=q({mutationFn:async t=>e?Z.bulkRestoreSpoolmanInventorySpools(t):Z.bulkRestoreSpools(t),onSuccess:e=>{Ae();let t=tt(e);if(e.restored===0&&t>0){a(n(`inventory.bulk.restoreAllFailed`,{count:t}),`error`);return}t>0?a(n(`inventory.bulk.restorePartial`,{ok:e.restored,failed:t}),`warning`):a(n(`inventory.bulk.restoreSuccess`,{count:e.restored}),`success`),he(null),_e()},onError:e=>{a(e.message||n(`inventory.bulk.restoreFailed`),`error`)}}),ot=(0,y.useMemo)(()=>(je??[]).map(e=>e.id),[je]),st=async t=>{if(t.last_scale_weight!=null)try{e?await Z.syncSpoolmanSpoolWeight(t.id,t.last_scale_weight):await Dd.updateSpoolWeight(t.id,t.last_scale_weight),i.invalidateQueries({queryKey:ke}),a(`Synced "${[t.brand,t.material,Ef(t.color_name,t.rgba,t.color_name_is_synthesized)].filter(Boolean).join(` `)}" to scale weight`,`success`)}catch(e){let t=e instanceof od&&e.status===404,r=e instanceof od&&e.status===503;a(n(t?`inventory.syncWeightSpoolNotFound`:r?`inventory.syncWeightSpoolmanUnreachable`:`inventory.syncWeightFailed`),`error`)}},ct=Se?.low_stock_threshold??20,[lt,ut]=(0,y.useState)(!1),[dt,ft]=(0,y.useState)(ct.toString());(0,y.useEffect)(()=>{lt||ft(ct.toString())},[ct,lt]);let pt=q({mutationFn:e=>Z.updateSettings({low_stock_threshold:e}),onSuccess:()=>{i.invalidateQueries({queryKey:[`settings`]}),a(n(`common.saved`),`success`),ut(!1)},onError:()=>{a(n(`inventory.lowStockThresholdError`),`error`)}}),mt=(0,y.useMemo)(()=>{if(!je)return null;let e=0,t=0,n=0,r=0,i={};for(let a of je){if(t+=Math.max(0,a.weight_used-(a.weight_used_baseline??0)),a.archived_at)continue;r++;let o=Math.max(0,a.label_weight-a.weight_used);e+=o,(a.label_weight>0?o/a.label_weight*100:0)<(a.low_stock_threshold_pct??ct)&&n++;let s=a.material||`Unknown`;i[s]||(i[s]={count:0,weight:0}),i[s].count++,i[s].weight+=o}return{totalWeight:e,totalConsumed:t,lowStock:n,byMaterial:i,totalSpools:r}},[je,ct]),ht=(Ge?.length??0)+(e?Ke.length:0),gt=Pf(Se?.currency||`USD`),_t=(0,y.useMemo)(()=>{let e={};for(let t of Ge||[])e[t.spool_id]={printer_id:t.printer_id,printer_name:t.printer_name,ams_id:t.ams_id,tray_id:t.tray_id,ams_label:t.ams_label??null};for(let t of Ke)typeof t?.spoolman_spool_id!=`number`||t.spoolman_spool_id<=0||typeof t.printer_id!=`number`||typeof t.ams_id!=`number`||typeof t.tray_id!=`number`||e[t.spoolman_spool_id]||(e[t.spoolman_spool_id]={printer_id:t.printer_id,printer_name:t.printer_name??null,ams_id:t.ams_id,tray_id:t.tray_id,ams_label:t.ams_label??null});return e},[Ge,Ke]),vt=(0,y.useMemo)(()=>{let e={};for(let t of Ye||[])e[t.id]=t;return e},[Ye]),{data:yt}=K({queryKey:[`locationHaSensors`],queryFn:()=>Z.getLocationHASensors()}),bt=(0,y.useMemo)(()=>new Set((yt??[]).map(e=>e.location_id)),[yt]),xt=(0,y.useMemo)(()=>{let e=new Set;for(let t of je||[])t.location_id&&bt.has(t.location_id)&&e.add(t.location_id);return Array.from(e)},[je,bt]),St=V===`cards`||V===`table`&&re.some(e=>e.visible&&(e.id===`temperature`||e.id===`humidity`||e.id===`battery`)),Ct=Co({queries:xt.map(e=>({queryKey:[`locationHaSensorReadings`,e],queryFn:()=>Z.getLocationHASensorReadings(e,!1),refetchInterval:we,enabled:St}))}),wt=(0,y.useMemo)(()=>{let e={};return xt.forEach((t,n)=>{let r=Ct[n]?.data;r&&(e[t]=r)}),e},[xt,Ct]),Tt=(0,y.useMemo)(()=>mt?Object.entries(mt.byMaterial).sort((e,t)=>t[1].weight-e[1].weight).slice(0,4):[],[mt]),Et=(0,y.useMemo)(()=>{let e=je||[];if(e=T===`active`?e.filter(e=>!e.archived_at):e.filter(e=>!!e.archived_at),D===`used`?e=e.filter(e=>e.weight_used>0):D===`new`?e=e.filter(e=>e.weight_used===0):D===`lowstock`&&(e=e.filter(e=>{let t=Math.max(0,e.label_weight-e.weight_used);return(e.label_weight>0?t/e.label_weight*100:0)<(e.low_stock_threshold_pct??ct)})),k&&(e=e.filter(e=>e.material===k)),j&&(e=e.filter(e=>e.brand===j)),N&&(e=N===`__none__`?e.filter(e=>!e.category):e.filter(e=>e.category===N)),F){let t=Number(F);e=e.filter(e=>e.core_weight_catalog_id===t)}if(Le)if(Le===`__none__`)e=e.filter(e=>!e.location_id&&!e.storage_location?.trim());else{let t=Number(Le),n=Fe.find(e=>e.id===t)?.name?.trim().toLowerCase();e=e.filter(e=>e.location_id==null?n?(e.storage_location||``).trim().toLowerCase()===n:!1:e.location_id===t)}return L===`stock`?e=e.filter(e=>!e.slicer_filament):L===`configured`&&(e=e.filter(e=>!!e.slicer_filament)),z&&(e=DU(e,z)),e},[je,T,D,k,j,N,F,L,Le,z,ct,Fe,r]),Dt=()=>ye(0),Ot=(0,y.useCallback)(e=>{u(t=>(t.delete(`location_id`),e&&t.set(`location_id`,e),t),{replace:!0}),Dt()},[u]),kt=[...new Set(je?.map(e=>e.material)||[])].sort(),At=[...new Set(je?.map(e=>e.brand).filter(Boolean)||[])].sort(),jt=[...new Set(je?.map(e=>e.category?.trim()).filter(Boolean)||[])].sort(),Mt=(je??[]).some(e=>!e.category),Nt=[...new Set(je?.map(e=>e.core_weight_catalog_id).filter(e=>e!=null)||[])].sort((e,t)=>{let n=(vt[e]?.name||``).toLowerCase(),r=(vt[t]?.name||``).toLowerCase();return n.localeCompare(r)}),Pt=(je??[]).some(e=>!e.location_id&&!e.storage_location?.trim()),Ft=T!==`active`||D!==`all`||!!k||!!j||!!N||!!F||!!Le||L!==`all`||!!z,It=e=>{ie(e),K1e(e)},Lt=(0,y.useMemo)(()=>re.filter(e=>e.visible).map(e=>e.id),[re]),Rt=e=>{E9[e]&&(ne(t=>{let n;return n=t?.column===e?t.direction===`asc`?{column:e,direction:`desc`}:null:{column:e,direction:`asc`},X1e(n),n}),Dt())},zt=(0,y.useMemo)(()=>{if(!te)return Et;let e=E9[te.column];return e?[...Et].sort((t,n)=>{let r=e(t,_t,wt),i=e(n,_t,wt);return r<i?te.direction===`asc`?-1:1:r>i?te.direction===`asc`?1:-1:0}):Et},[Et,te,_t,wt]),Bt=(0,y.useMemo)(()=>{if(!se)return zt.map(e=>({type:`single`,spool:e}));let e=new Map;for(let t of zt)if(!(t.weight_used>0||_t[t.id])){let n=U1e(t),r=e.get(n);r?r.push(t):e.set(n,[t])}let t=[],n=new Set;for(let r of zt){if(r.weight_used>0||_t[r.id]){t.push({type:`single`,spool:r});continue}let i=U1e(r);if(n.has(i))continue;n.add(i);let a=e.get(i);a.length===1?t.push({type:`single`,spool:a[0]}):t.push({type:`group`,key:i,spools:a,representative:a[0]})}return t},[zt,se,_t]),Vt=be===-1,Ht=Bt.length,Ut=Vt?Ht||1:be,Wt=Math.max(1,Math.ceil(Ht/Ut)),Gt=Vt?0:Math.min(ve,Wt-1),Kt=Vt?Bt:Bt.slice(Gt*Ut,(Gt+1)*Ut),qt=()=>{let e=!se;H(e),le(new Set),Dt();try{localStorage.setItem(`bambuddy-inventory-group`,String(e))}catch{}},Jt=e=>{le(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},Yt=e=>{xe(e),ye(0);try{localStorage.setItem(`bambuddy-inventory-pageSize`,String(e))}catch{}};return(0,G.jsxs)(`div`,{className:`p-4 md:p-8 space-y-6`,children:[(0,G.jsxs)(`div`,{className:`flex flex-col gap-4 sm:flex-row sm:items-center sm:justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(Sl,{className:`w-7 h-7 text-bambu-green`}),n(`inventory.title`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:n(`inventory.subtitle`)})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2`,children:[(0,G.jsxs)(Q,{variant:`secondary`,disabled:e,onClick:()=>b(!0),title:Pe,children:[(0,G.jsx)(Bu,{className:`w-4 h-4`}),n(`inventory.csv.importButton`,`Import CSV`)]}),(0,G.jsxs)(Q,{variant:`secondary`,disabled:e||x,onClick:Ne,title:Pe,children:[x?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Ys,{className:`w-4 h-4`}),n(`inventory.csv.exportButton`,`Export CSV`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>w(!0),children:[(0,G.jsx)(al,{className:`w-4 h-4`}),n(`locations.manage`)]}),(0,G.jsxs)(Q,{variant:`secondary`,disabled:Et.length===0,onClick:()=>_(Et.map(e=>e.id)),title:Et.length===0?n(`inventory.labels.noSpoolsTitle`,`No spools to label`):n(`inventory.labels.bulkTitle`,`Pick spools to print labels for from the {{count}} currently shown`,{count:Et.length}),children:[(0,G.jsx)(Ll,{className:`w-4 h-4`}),n(`inventory.labels.printLabels`,`Print labels…`)]}),(0,G.jsxs)(Q,{onClick:()=>f({spool:null,mode:`create`}),children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),n(`inventory.addSpool`)]})]})]}),mt&&!Me&&(0,G.jsxs)(`div`,{className:`grid grid-cols-2 md:grid-cols-3 lg:grid-cols-5 gap-3`,children:[(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1`,children:[(0,G.jsx)(Sl,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray font-medium uppercase tracking-wide`,children:n(`inventory.totalInventory`)})]}),(0,G.jsx)(`div`,{className:`text-xl font-bold text-white`,children:C9(mt.totalWeight,!0)}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray mt-1`,children:[mt.totalSpools,` `,mt.totalSpools===1?n(`inventory.spool`):n(`inventory.spools`)]})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2 mb-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Pu,{className:`w-4 h-4 text-blue-600 dark:text-blue-400`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray font-medium uppercase tracking-wide`,children:n(`inventory.totalConsumed`)})]}),mt.totalConsumed>0&&ot.length>0&&(0,G.jsx)(`button`,{onClick:()=>h({type:`reset-all-consumed-counters`}),className:`p-1 text-bambu-gray hover:text-red-600 dark:hover:text-red-400 rounded transition-colors`,title:n(`inventory.resetAllConsumedCountersTooltip`),"aria-label":n(`inventory.resetAllConsumedCounters`),children:(0,G.jsx)(tc,{className:`w-3.5 h-3.5`})})]}),(0,G.jsx)(`div`,{className:`text-xl font-bold text-white`,children:C9(mt.totalConsumed,!0)}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mt-1`,children:n(`inventory.sinceTracking`)})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1`,children:[(0,G.jsx)(qc,{className:`w-4 h-4 text-green-600 dark:text-green-400`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray font-medium uppercase tracking-wide`,children:n(`inventory.byMaterial`)})]}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1.5 mt-1`,children:Tt.map(([e,t])=>(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 px-2 py-0.5 rounded-full text-xs font-medium ${q1e[e]||`bg-bambu-dark-tertiary text-bambu-gray`}`,children:[e,` `,(0,G.jsx)(`span`,{className:`opacity-70`,children:C9(t.weight,!0)})]},e))})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1`,children:[(0,G.jsx)(Ll,{className:`w-4 h-4 text-purple-600 dark:text-purple-400`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray font-medium uppercase tracking-wide`,children:n(`inventory.inPrinter`)})]}),(0,G.jsx)(`div`,{className:`text-xl font-bold text-white`,children:ht}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mt-1`,children:n(`inventory.loadedInAms`)})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-600 dark:text-yellow-400`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray font-medium uppercase tracking-wide`,children:n(`inventory.lowStock`)})]}),(0,G.jsx)(`div`,{className:`text-xl font-bold ${mt.lowStock>0?`text-yellow-700 dark:text-yellow-400`:`text-white`}`,children:mt.lowStock}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mt-1 flex items-center gap-2`,children:lt?(0,G.jsxs)(`form`,{onSubmit:e=>{e.preventDefault();let t=parseFloat(dt);!isNaN(t)&&t>=.1&&t<=99.9?pt.mutate(t):a(n(`inventory.lowStockThresholdError`),`error`)},className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`<`}),(0,G.jsx)(`input`,{type:`text`,inputMode:`decimal`,pattern:`^\\d{0,2}(\\.\\d?)?$`,maxLength:4,value:dt,onChange:e=>{let t=e.target.value.replace(/[^\d.]/g,``);/^\d{0,2}(\.\d?)?$/.test(t)&&ft(t)},className:`px-1.5 py-1 rounded border border-bambu-dark-tertiary text-xs text-white bg-bambu-dark-secondary focus:outline-none focus:border-bambu-green w-14 text-center`,onWheel:e=>e.currentTarget.blur(),disabled:pt.isPending}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`%`}),(0,G.jsx)(Q,{type:`submit`,size:`sm`,disabled:pt.isPending,children:n(`common.save`)}),(0,G.jsx)(Q,{type:`button`,size:`sm`,variant:`ghost`,onClick:()=>ut(!1),disabled:pt.isPending,children:n(`common.cancel`)})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[`< `,ct,`%`]}),(0,G.jsx)(`button`,{className:`p-1.5 text-bambu-gray hover:text-white rounded transition-colors`,title:n(`common.edit`),onClick:()=>{ft(ct.toString()),ut(!0)},children:(0,G.jsx)(Ol,{className:`w-4 h-4`})})]})})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-col sm:flex-row gap-3 items-start sm:items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1 max-w-md ${V===`forecast`?`invisible pointer-events-none`:``}`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray/50`}),(0,G.jsx)(`input`,{type:`text`,value:z,onChange:e=>{B(e.target.value),Dt()},placeholder:n(`inventory.search`),className:`w-full pl-10 pr-8 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`}),z&&(0,G.jsx)(`button`,{onClick:()=>{B(``),Dt()},className:`absolute right-3 top-1/2 -translate-y-1/2 text-bambu-gray hover:text-white`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[V===`table`&&(0,G.jsxs)(`button`,{onClick:()=>oe(!0),className:`flex items-center gap-1.5 px-3 py-1.5 text-sm font-medium text-bambu-gray border border-bambu-dark-tertiary rounded-lg hover:bg-bambu-dark-tertiary transition-colors`,title:n(`inventory.configureColumns`),children:[(0,G.jsx)(zs,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:n(`inventory.columns`)})]}),V!==`forecast`&&(0,G.jsxs)(`button`,{onClick:qt,className:`flex items-center gap-1.5 px-3 py-1.5 text-sm font-medium border rounded-lg transition-colors ${se?`bg-bambu-green/20 text-bambu-green border-bambu-green/30`:`text-bambu-gray border-bambu-dark-tertiary hover:bg-bambu-dark-tertiary`}`,title:n(`inventory.groupSimilar`),children:[(0,G.jsx)(jc,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:n(`inventory.groupSimilar`)})]}),(0,G.jsxs)(`div`,{className:`flex bg-bambu-dark-primary border border-bambu-dark-tertiary rounded-lg overflow-hidden`,children:[(0,G.jsxs)(`button`,{onClick:()=>ee(`table`),className:`flex items-center gap-1.5 px-3 py-1.5 text-sm font-medium transition-colors ${V===`table`?`bg-bambu-green text-white`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(wu,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:n(`inventory.table`)})]}),(0,G.jsxs)(`button`,{onClick:()=>ee(`cards`),className:`flex items-center gap-1.5 px-3 py-1.5 text-sm font-medium transition-colors ${V===`cards`?`bg-bambu-green text-white`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(Jc,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:n(`inventory.cards`)})]}),(0,G.jsxs)(`button`,{onClick:()=>c&&ee(`forecast`),disabled:!c,title:c?void 0:n(`forecast.noReadAccess`),className:`flex items-center gap-1.5 px-3 py-1.5 text-sm font-medium transition-colors disabled:opacity-40 disabled:cursor-not-allowed ${V===`forecast`?`bg-bambu-green text-white`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:[c?(0,G.jsx)(Fu,{className:`w-4 h-4`}):(0,G.jsx)(tl,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:n(`forecast.title`)})]})]})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 ${V===`forecast`?`hidden`:``}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center rounded-lg border border-bambu-dark-tertiary overflow-hidden`,children:[(0,G.jsxs)(`button`,{onClick:()=>{E(`active`),Dt()},className:`flex items-center gap-1.5 px-3 py-1.5 text-xs font-medium transition-colors ${T===`active`?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(Sl,{className:`w-3.5 h-3.5`}),n(`inventory.active`)]}),(0,G.jsxs)(`button`,{onClick:()=>{E(`archived`),Dt()},className:`flex items-center gap-1.5 px-3 py-1.5 text-xs font-medium transition-colors ${T===`archived`?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(Po,{className:`w-3.5 h-3.5`}),n(`inventory.archived`)]})]}),(0,G.jsx)(`div`,{className:`w-px h-5 bg-bambu-dark-tertiary`}),(0,G.jsxs)(`div`,{className:`flex items-center rounded-lg border border-bambu-dark-tertiary overflow-hidden`,children:[(0,G.jsx)(`button`,{onClick:()=>{O(`all`),Dt()},className:`px-3 py-1.5 text-xs font-medium transition-colors ${D===`all`?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:n(`inventory.all`)}),(0,G.jsxs)(`button`,{onClick:()=>{O(`used`),Dt()},className:`flex items-center gap-1.5 px-3 py-1.5 text-xs font-medium transition-colors ${D===`used`?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(js,{className:`w-3.5 h-3.5`}),n(`inventory.used`)]}),(0,G.jsx)(`button`,{onClick:()=>{O(`new`),Dt()},className:`px-3 py-1.5 text-xs font-medium transition-colors ${D===`new`?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:n(`inventory.new`)}),(0,G.jsxs)(`button`,{onClick:()=>{O(`lowstock`),Dt()},className:`flex items-center gap-1.5 px-3 py-1.5 text-xs font-medium transition-colors ${D===`lowstock`?`bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(Iu,{className:`w-3.5 h-3.5`}),n(`inventory.lowStock`)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center rounded-lg border border-bambu-dark-tertiary overflow-hidden`,children:[(0,G.jsx)(`button`,{onClick:()=>{R(`all`),Dt()},className:`px-3 py-1.5 text-xs font-medium transition-colors ${L===`all`?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:n(`inventory.all`)}),(0,G.jsx)(`button`,{onClick:()=>{R(`stock`),Dt()},className:`px-3 py-1.5 text-xs font-medium transition-colors ${L===`stock`?`bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:n(`inventory.stock`)}),(0,G.jsx)(`button`,{onClick:()=>{R(`configured`),Dt()},className:`px-3 py-1.5 text-xs font-medium transition-colors ${L===`configured`?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:n(`inventory.configured`)})]}),(0,G.jsx)(`div`,{className:`w-px h-5 bg-bambu-dark-tertiary`}),(0,G.jsxs)(`select`,{value:k,onChange:e=>{A(e.target.value),Dt()},className:`px-3 py-1.5 rounded-lg border text-xs font-medium transition-colors cursor-pointer focus:outline-none ${k?`bg-bambu-green/20 text-bambu-green border-bambu-green/30`:`bg-transparent text-bambu-gray border-bambu-dark-tertiary hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(`option`,{value:``,children:n(`inventory.material`)}),kt.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]}),(0,G.jsxs)(`select`,{value:j,onChange:e=>{M(e.target.value),Dt()},className:`px-3 py-1.5 rounded-lg border text-xs font-medium transition-colors cursor-pointer focus:outline-none ${j?`bg-bambu-green/20 text-bambu-green border-bambu-green/30`:`bg-transparent text-bambu-gray border-bambu-dark-tertiary hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(`option`,{value:``,children:n(`inventory.brand`)}),At.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]}),(jt.length>0||N)&&(0,G.jsxs)(`select`,{value:N,onChange:e=>{P(e.target.value),Dt()},className:`px-3 py-1.5 rounded-lg border text-xs font-medium transition-colors cursor-pointer focus:outline-none ${N?`bg-bambu-green/20 text-bambu-green border-bambu-green/30`:`bg-transparent text-bambu-gray border-bambu-dark-tertiary hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(`option`,{value:``,children:n(`inventory.category`)}),jt.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e)),Mt&&(0,G.jsx)(`option`,{value:`__none__`,children:n(`inventory.categoryNone`)})]}),Nt.length>0&&(0,G.jsxs)(`select`,{value:F,onChange:e=>{I(e.target.value),Dt()},className:`px-3 py-1.5 rounded-lg border text-xs font-medium transition-colors cursor-pointer focus:outline-none ${F?`bg-bambu-green/20 text-bambu-green border-bambu-green/30`:`bg-transparent text-bambu-gray border-bambu-dark-tertiary hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(`option`,{value:``,children:n(`inventory.spoolName`)}),Nt.map(e=>(0,G.jsx)(`option`,{value:e,children:vt[e]?.name||`#${e}`},e))]}),(Fe.length>0||Le)&&(0,G.jsxs)(`select`,{value:Le,onChange:e=>{Ot(e.target.value)},className:`px-3 py-1.5 rounded-lg border text-xs font-medium transition-colors cursor-pointer focus:outline-none ${Le?`bg-bambu-green/20 text-bambu-green border-bambu-green/30`:`bg-transparent text-bambu-gray border-bambu-dark-tertiary hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(`option`,{value:``,children:n(`inventory.storageLocation`)}),Fe.map(e=>(0,G.jsx)(`option`,{value:String(e.id),children:e.name},e.id)),Pt&&(0,G.jsx)(`option`,{value:`__none__`,children:n(`inventory.storageLocationNone`)})]}),Ft&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`w-px h-5 bg-bambu-dark-tertiary`}),(0,G.jsxs)(`button`,{onClick:()=>{E(`active`),O(`all`),A(``),M(``),P(``),I(``),R(`all`),B(``),u(e=>(e.delete(`location_id`),e),{replace:!0}),Dt()},className:`flex items-center gap-1 text-xs text-bambu-gray hover:text-bambu-green transition-colors`,children:[(0,G.jsx)(td,{className:`w-3.5 h-3.5`}),n(`inventory.clearFilters`)]})]}),V!==`forecast`&&(0,G.jsxs)(`span`,{className:`ml-auto text-xs text-bambu-gray`,children:[zt.length,` `,zt.length===1?n(`inventory.spool`):n(`inventory.spools`),se&&Ht<zt.length&&` (${Ht} ${n(`inventory.groupedRows`)})`]})]}),ue.size>0&&V!==`forecast`&&(0,G.jsxs)(`div`,{className:`sticky top-2 z-10 mb-4 flex items-center gap-2 px-3 py-2 bg-bambu-green/10 border border-bambu-green/30 rounded-lg backdrop-blur-sm`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-green font-medium`,children:n(`inventory.bulk.selectionCount`,{count:ue.size})}),(0,G.jsxs)(`div`,{className:`ml-auto flex flex-wrap items-center gap-2`,children:[(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>pe(!0),children:[(0,G.jsx)(Ol,{className:`w-3.5 h-3.5 mr-1.5`}),n(`inventory.bulk.edit`)]}),(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>_([...ue]),children:[(0,G.jsx)(Ll,{className:`w-3.5 h-3.5 mr-1.5`}),n(`inventory.bulk.printLabels`)]}),(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>he(`reset-consumed-counter`),children:[(0,G.jsx)(tc,{className:`w-3.5 h-3.5 mr-1.5`}),n(`inventory.bulk.resetUsage`)]}),T===`archived`?(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>he(`restore`),children:[(0,G.jsx)(Ul,{className:`w-3.5 h-3.5 mr-1.5`}),n(`inventory.bulk.restore`)]}):(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>he(`archive`),children:[(0,G.jsx)(Po,{className:`w-3.5 h-3.5 mr-1.5`}),n(`inventory.bulk.archive`)]}),(0,G.jsxs)(Q,{size:`sm`,variant:`danger`,onClick:()=>he(`delete`),children:[(0,G.jsx)(Nu,{className:`w-3.5 h-3.5 mr-1.5`}),n(`inventory.bulk.delete`)]}),(0,G.jsx)(`button`,{className:`p-1.5 text-bambu-gray hover:text-white rounded transition-colors`,onClick:_e,title:n(`inventory.bulk.clearSelection`),"aria-label":n(`inventory.bulk.clearSelection`),children:(0,G.jsx)(td,{className:`w-4 h-4`})})]})]}),Me?(0,G.jsx)(`div`,{className:`flex justify-center py-16`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):V===`forecast`?(0,G.jsx)($$e,{spools:je||[]}):V===`cards`?Kt.length>0?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 lg:grid-cols-3 xl:grid-cols-4 gap-4`,children:Kt.map(e=>{if(e.type===`group`){let{key:t,spools:r,representative:i}=e,a=r.reduce((e,t)=>e+Math.max(0,t.label_weight-t.weight_used),0),o=CU({rgba:i.rgba,extraColors:i.extra_colors,effectType:i.effect_type,subtype:i.subtype,effectSize:`groupheader`}),s=ce.has(t);return(0,G.jsxs)(`div`,{className:`col-span-full`,children:[(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg overflow-hidden border border-bambu-green/30 hover:border-bambu-green transition-colors cursor-pointer`,onClick:()=>Jt(t),children:[(0,G.jsx)(`div`,{className:`h-10 flex items-center px-4 gap-3`,style:o,children:(0,G.jsx)(`span`,{className:`bg-white/90 text-gray-800 px-3 py-0.5 rounded-full text-sm font-medium`,children:Ef(i.color_name,i.rgba,i.color_name_is_synthesized)||`-`})}),(0,G.jsxs)(`div`,{className:`px-4 py-3 flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray transition-transform ${s?``:`-rotate-90`}`}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h3`,{className:`font-semibold text-white`,children:[i.material,i.subtype?` ${i.subtype}`:``]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i.brand||`-`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,title:n(`inventory.remaining`),children:C9(a)}),(0,G.jsx)(`span`,{className:`text-xs font-medium bg-bambu-green/20 text-bambu-green px-2 py-0.5 rounded-full`,children:n(`inventory.groupedSpools`,{count:r.length})})]})]})]}),s&&(0,G.jsx)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 lg:grid-cols-3 xl:grid-cols-4 gap-4 mt-2 ml-4`,children:r.map(e=>{let t=Math.max(0,e.label_weight-e.weight_used);return(0,G.jsx)(e0e,{spool:e,remaining:t,pct:e.label_weight>0?t/e.label_weight*100:0,onClick:()=>f({spool:e,mode:`edit`}),onPrintLabel:()=>_([e.id]),onCopy:()=>f({spool:e,mode:`copy`}),t:n,colorizeLocationSensors:Te,locationSensorAboveColor:Ee,locationSensorBelowColor:De,locationSensorOptimalColor:Oe},e.id)})})]},`group-${t}`)}let t=e.spool,r=Math.max(0,t.label_weight-t.weight_used);return(0,G.jsx)(e0e,{spool:t,remaining:r,pct:t.label_weight>0?r/t.label_weight*100:0,onClick:()=>f({spool:t,mode:`edit`}),onPrintLabel:()=>_([t.id]),onCopy:()=>f({spool:t,mode:`copy`}),t:n,colorizeLocationSensors:Te,locationSensorAboveColor:Ee,locationSensorBelowColor:De,locationSensorOptimalColor:Oe},t.id)})}),(0,G.jsx)($1e,{pageIndex:Gt,pageSize:be,totalRows:Ht,totalPages:Wt,onPageChange:ye,onPageSizeChange:Yt,t:n})]}):(0,G.jsx)(o0e,{hasFilters:Ft,onAddSpool:()=>f({spool:null,mode:`create`}),t:n}):Kt.length>0?(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg overflow-hidden border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary bg-bambu-dark-tertiary/30`,children:[(0,G.jsx)(`th`,{className:`w-10 px-3 py-3`,children:(0,G.jsx)(`input`,{type:`checkbox`,className:`h-4 w-4 cursor-pointer`,"aria-label":n(`inventory.bulk.selectAllVisible`),checked:Kt.length>0&&Kt.every(e=>(e.type===`group`?e.spools.map(e=>e.id):[e.spool.id]).every(e=>ue.has(e))),onChange:e=>{if(e.target.checked){let e=new Set(ue);for(let t of Kt){let n=t.type===`group`?t.spools.map(e=>e.id):[t.spool.id];for(let t of n)e.add(t)}de(e)}else{let e=new Set(ue);for(let t of Kt){let n=t.type===`group`?t.spools.map(e=>e.id):[t.spool.id];for(let t of n)e.delete(t)}de(e)}}})}),Lt.map(e=>{let t=!!E9[e],r=te?.column===e;return(0,G.jsx)(`th`,{className:`text-left py-3 px-4 text-xs font-medium uppercase tracking-wide select-none ${e===`remaining`?`min-w-[150px]`:``} ${t?`cursor-pointer hover:text-bambu-green transition-colors`:``} ${r?`text-bambu-green`:`text-bambu-gray`}`,onClick:t?()=>Rt(e):void 0,children:(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1`,children:[J1e[e]?.(n)??e,t&&(r?te.direction===`asc`?(0,G.jsx)(Ho,{className:`w-3 h-3`}):(0,G.jsx)(Io,{className:`w-3 h-3`}):(0,G.jsx)(Bo,{className:`w-3 h-3 opacity-30`}))]})},e)}),(0,G.jsx)(`th`,{className:`text-right py-3 px-4 text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:n(`common.actions`)})]})}),(0,G.jsx)(`tbody`,{children:Kt.map(e=>{if(e.type===`group`){let{key:t,spools:r}=e,i=ce.has(t),a=H1e(r),o=Math.max(0,a.label_weight-a.weight_used);return(0,G.jsx)(a0e,{spools:r,headerSpool:a,remaining:o,pct:a.label_weight>0?o/a.label_weight*100:0,isExpanded:i,onToggle:()=>Jt(t),selectedIds:ue,onToggleSelected:ge,onToggleGroupSelected:(e,t)=>{de(n=>{let r=new Set(n);for(let n of e)t?r.add(n):r.delete(n);return r})},onEdit:e=>f({spool:e,mode:`edit`}),onCopy:e=>f({spool:e,mode:`copy`}),onArchive:e=>h({type:`archive`,spoolId:e}),onDelete:e=>h({type:`delete`,spoolId:e}),onPrintLabel:e=>_([e]),onResetConsumedCounter:e=>h({type:`reset-consumed-counter`,spoolId:e}),visibleColumns:Lt,assignmentMap:_t,catalogMap:vt,locationReadingsMap:wt,currencySymbol:gt,dateFormat:Ce,t:n,onSyncWeight:st,colorizeLocationSensors:Te,locationSensorAboveColor:Ee,locationSensorBelowColor:De,locationSensorOptimalColor:Oe},`group-${t}`)}let t=e.spool,r=Math.max(0,t.label_weight-t.weight_used);return(0,G.jsx)(i0e,{spool:t,remaining:r,pct:t.label_weight>0?r/t.label_weight*100:0,isSelected:ue.has(t.id),onToggleSelected:()=>ge(t.id),onEdit:()=>f({spool:t,mode:`edit`}),onCopy:()=>f({spool:t,mode:`copy`}),onRestore:()=>Qe.mutate(t.id),onArchive:()=>h({type:`archive`,spoolId:t.id}),onDelete:()=>h({type:`delete`,spoolId:t.id}),onPrintLabel:()=>_([t.id]),onResetConsumedCounter:()=>h({type:`reset-consumed-counter`,spoolId:t.id}),visibleColumns:Lt,assignmentMap:_t,catalogMap:vt,locationReadingsMap:wt,currencySymbol:gt,dateFormat:Ce,t:n,onSyncWeight:st,colorizeLocationSensors:Te,locationSensorAboveColor:Ee,locationSensorBelowColor:De,locationSensorOptimalColor:Oe},t.id)})})]})}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-4 py-3 bg-bambu-dark-tertiary/50 border-t border-bambu-dark-tertiary text-sm`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:Vt?`${Ht} ${n(Ht===1?`inventory.spool`:`inventory.spools`)}`:(0,G.jsxs)(G.Fragment,{children:[n(`inventory.showing`),` `,Gt*Ut+1,` `,n(`inventory.to`),` `,Math.min((Gt+1)*Ut,Ht),` `,n(`inventory.of`),` `,Ht,` `,n(`inventory.spools`)]})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:n(`inventory.show`)}),(0,G.jsxs)(`select`,{value:be,onChange:e=>Yt(Number(e.target.value)),className:`px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:outline-none focus:border-bambu-green`,children:[[15,30,50,100].map(e=>(0,G.jsx)(`option`,{value:e,children:e},e)),(0,G.jsx)(`option`,{value:-1,children:n(`inventory.all`)})]}),!Vt&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`button`,{onClick:()=>ye(0),disabled:Gt===0,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,title:`First page`,children:(0,G.jsx)(_s,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>ye(e=>Math.max(0,e-1)),disabled:Gt===0,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,children:(0,G.jsx)(hs,{className:`w-4 h-4`})}),(0,G.jsxs)(`span`,{className:`text-bambu-gray px-2 whitespace-nowrap`,children:[n(`inventory.page`),` `,Gt+1,` `,n(`inventory.of`),` `,Wt]}),(0,G.jsx)(`button`,{onClick:()=>ye(e=>Math.min(Wt-1,e+1)),disabled:Gt>=Wt-1,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,children:(0,G.jsx)(ms,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>ye(Wt-1),disabled:Gt>=Wt-1,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,title:`Last page`,children:(0,G.jsx)(vs,{className:`w-4 h-4`})})]})]})]})]}):(0,G.jsx)(o0e,{hasFilters:Ft,onAddSpool:()=>f({spool:null,mode:`create`}),t:n}),d!==null&&(0,G.jsx)(A1e,{isOpen:!0,onClose:()=>f(null),spool:d.spool,mode:d.mode,currencySymbol:gt,spoolmanMode:e,spoolsQueryKey:ke}),m&&(0,G.jsx)(rf,{title:m.type===`delete`?n(`common.delete`):m.type===`archive`?n(`inventory.archive`):m.type===`reset-consumed-counter`?n(`inventory.resetConsumedCounter`):n(`inventory.resetAllConsumedCounters`),message:m.type===`delete`?n(`inventory.deleteConfirm`):m.type===`archive`?n(`inventory.archiveConfirm`):m.type===`reset-consumed-counter`?n(`inventory.resetConsumedCounterConfirm`):n(`inventory.resetAllConsumedCountersConfirm`,{count:ot.length}),confirmText:m.type===`delete`?n(`common.delete`):m.type===`archive`?n(`inventory.archive`):n(`inventory.resetConsumedCounter`),variant:m.type===`archive`?`warning`:`danger`,onConfirm:()=>{m.type===`delete`?Xe.mutate(m.spoolId):m.type===`archive`?Ze.mutate(m.spoolId):m.type===`reset-consumed-counter`?$e.mutate(m.spoolId):et.mutate(ot),h(null)},onCancel:()=>h(null)}),(0,G.jsx)(oK,{isOpen:ae,onClose:()=>oe(!1),columns:re,defaultColumns:S9,onSave:It}),(0,G.jsx)(R1e,{isOpen:g!==null,onClose:()=>_(null),availableSpools:Et,initialSelectedIds:g??[],spoolmanMode:e}),(0,G.jsx)(V1e,{isOpen:fe,selectedCount:ue.size,isPending:nt.isPending,availableLocations:Fe.map(e=>({id:e.id,name:e.name})),availableMaterials:x9((je??[]).map(e=>e.material)),availableSubtypes:x9((je??[]).map(e=>e.subtype)),availableBrands:x9((je??[]).map(e=>e.brand)),availableCategories:x9((je??[]).map(e=>e.category)),availableSlicerFilaments:x9((je??[]).map(e=>e.slicer_filament)),availableSlicerFilamentNames:x9((je??[]).map(e=>e.slicer_filament_name)),onClose:()=>pe(!1),onApply:e=>nt.mutate({ids:[...ue],update:e})}),me&&(0,G.jsx)(rf,{title:n(me===`delete`?`inventory.bulk.deleteTitle`:me===`archive`?`inventory.bulk.archiveTitle`:me===`restore`?`inventory.bulk.restoreTitle`:`inventory.bulk.resetUsageTitle`),message:n(me===`delete`?`inventory.bulk.deleteMessage`:me===`archive`?`inventory.bulk.archiveMessage`:me===`restore`?`inventory.bulk.restoreMessage`:`inventory.bulk.resetUsageMessage`,{count:ue.size}),confirmText:n(me===`delete`?`common.delete`:me===`archive`?`inventory.archive`:me===`restore`?`inventory.restore`:`inventory.resetConsumedCounter`),variant:me===`delete`?`danger`:`warning`,isLoading:rt.isPending||it.isPending||at.isPending||et.isPending,onConfirm:()=>{let e=[...ue];me===`delete`?rt.mutate(e):me===`archive`?it.mutate(e):me===`restore`?at.mutate(e):et.mutate(e)},onCancel:()=>he(null)}),v&&(0,G.jsx)(z1e,{onClose:()=>b(!1),onImported:e=>{b(!1),i.invalidateQueries({queryKey:ke}),a(n(`inventory.csv.importSuccess`,`{{count}} spools imported`,{count:e}),`success`)}}),(0,G.jsx)(XUe,{open:C,onClose:()=>w(!1),onPickLocation:e=>Ot(String(e))})]})}function $1e({pageIndex:e,pageSize:t,totalRows:n,totalPages:r,onPageChange:i,onPageSizeChange:a,t:o}){let s=t===-1;if(r<=1&&!s)return null;let c=s?n||1:t;return(0,G.jsxs)(`div`,{className:`flex items-center justify-between pt-2 text-sm`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:s?`${n} ${o(n===1?`inventory.spool`:`inventory.spools`)}`:(0,G.jsxs)(G.Fragment,{children:[o(`inventory.showing`),` `,e*c+1,` `,o(`inventory.to`),` `,Math.min((e+1)*c,n),` `,o(`inventory.of`),` `,n,` `,o(`inventory.spools`)]})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:o(`inventory.show`)}),(0,G.jsxs)(`select`,{value:t,onChange:e=>a(Number(e.target.value)),className:`px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:outline-none focus:border-bambu-green`,children:[[15,30,50,100].map(e=>(0,G.jsx)(`option`,{value:e,children:e},e)),(0,G.jsx)(`option`,{value:-1,children:o(`inventory.all`)})]}),!s&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`button`,{onClick:()=>i(0),disabled:e===0,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,children:(0,G.jsx)(_s,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>i(Math.max(0,e-1)),disabled:e===0,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,children:(0,G.jsx)(hs,{className:`w-4 h-4`})}),(0,G.jsxs)(`span`,{className:`text-bambu-gray px-2 whitespace-nowrap`,children:[o(`inventory.page`),` `,e+1,` `,o(`inventory.of`),` `,r]}),(0,G.jsx)(`button`,{onClick:()=>i(Math.min(r-1,e+1)),disabled:e>=r-1,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,children:(0,G.jsx)(ms,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>i(r-1),disabled:e>=r-1,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,children:(0,G.jsx)(vs,{className:`w-4 h-4`})})]})]})]})}function e0e({spool:e,remaining:t,pct:n,onClick:r,onPrintLabel:i,onCopy:a,t:o,colorizeLocationSensors:s,locationSensorAboveColor:c,locationSensorBelowColor:l,locationSensorOptimalColor:u}){let d=CU({rgba:e.rgba,extraColors:e.extra_colors,effectType:e.effect_type,subtype:e.subtype,effectSize:`card`});return(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg overflow-hidden border border-bambu-dark-tertiary hover:border-bambu-green transition-colors cursor-pointer ${e.archived_at?`opacity-50`:``}`,onClick:r,children:[(0,G.jsxs)(`div`,{className:`h-14 flex items-center justify-center`,style:d,children:[(0,G.jsx)(`span`,{className:`bg-white/90 text-gray-800 px-3 py-0.5 rounded-full text-sm font-medium`,children:Ef(e.color_name,e.rgba,e.color_name_is_synthesized)||`-`}),a&&(0,G.jsx)(`button`,{type:`button`,onClick:e=>{e.stopPropagation(),a()},className:`p-1.5 bg-black/20 hover:bg-black/40 text-white rounded-full transition-colors`,title:o(`inventory.copySpool`),children:(0,G.jsx)(Vs,{className:`w-3.5 h-3.5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h3`,{className:`font-semibold text-white`,children:[e.material,e.subtype?` ${e.subtype}`:``]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e.brand||`-`})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[i&&(0,G.jsx)(`button`,{onClick:e=>{e.stopPropagation(),i()},className:`p-1 text-bambu-gray hover:text-white rounded transition-colors`,title:o(`inventory.labels.printOne`),"aria-label":o(`inventory.labels.printOne`),children:(0,G.jsx)(Ll,{className:`w-4 h-4`})}),(0,G.jsxs)(`span`,{className:`text-xs font-mono text-bambu-gray bg-bambu-dark-tertiary px-2 py-1 rounded`,children:[`#`,e.id]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex justify-between text-xs text-bambu-gray mb-1`,children:[(0,G.jsx)(`span`,{children:o(`inventory.remaining`)}),(0,G.jsxs)(`span`,{children:[Math.round(n),`%`]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`div`,{className:`flex-1 h-2 bg-bambu-dark-tertiary rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full ${n>50?`bg-bambu-green`:n>20?`bg-yellow-500`:`bg-red-500`}`,style:{width:`${Math.min(n,100)}%`}})}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray min-w-[40px] text-right`,children:[Math.round(t),`g`]})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2 text-xs`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`span`,{className:`text-bambu-gray/60`,children:[o(`inventory.labelWeight`),`: `]}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:C9(e.label_weight)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`span`,{className:`text-bambu-gray/60`,children:[o(`inventory.weightUsed`),`: `]}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:e.weight_used>0?C9(e.weight_used):`-`})]})]}),e.location_id&&(0,G.jsx)(r0e,{locationId:e.location_id,locationName:e.storage_location??null,isLast:!e.note,colorize:s,aboveColor:c,belowColor:l,optimalColor:u}),e.note&&(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray/60 pt-3 border-t border-bambu-dark-tertiary truncate`,title:e.note,children:e.note})]})]})}var t0e={temperature:0,humidity:1,battery:2};function n0e(e){return e===`humidity`?`mr-[2px]`:e===`battery`?`mr-[3px]`:``}function O9(e,t){return BT(e,t,{decimals:2})}function k9(e,t,n,r,i){return t&&TUe(wUe(e),n,r,i)||`text-bambu-gray`}function r0e({locationId:e,locationName:t,isLast:n,colorize:r,aboveColor:i,belowColor:a,optimalColor:o}){let{t:s}=U(),{data:c}=K({queryKey:[`settings`],queryFn:Z.getSettings}),l=(c?.location_sensor_poll_interval||120)*1e3,{data:u}=K({queryKey:[`locationHaSensors`],queryFn:()=>Z.getLocationHASensors()}),d=(u??[]).some(t=>t.location_id===e),{data:f}=K({queryKey:[`locationHaSensorReadings`,e],queryFn:()=>Z.getLocationHASensorReadings(e,!1),refetchInterval:l,enabled:d}),p=f?.filter(e=>e.show_on_card);if(!p?.length)return null;let m=p.find(e=>e.device_class===`battery`),h=p.filter(e=>e.device_class!==`battery`).sort((e,t)=>(t0e[e.device_class??``]??99)-(t0e[t.device_class??``]??99));return(0,G.jsxs)(`div`,{className:`flex items-center gap-2 pt-3 border-t border-bambu-dark-tertiary text-xs text-bambu-gray ${n?`-mb-1`:``}`,children:[t&&(0,G.jsx)(`span`,{className:`truncate`,children:t}),(0,G.jsx)(`span`,{className:`text-bambu-gray/40`,children:`|`}),(0,G.jsx)(`div`,{className:`flex items-center gap-3`,children:h.map((e,t)=>{let n=VT(e),c=t===0?`ml-[-3.6px]`:``;return(0,G.jsxs)(`span`,{title:e.name,className:`flex items-center gap-[3px]`,children:[(0,G.jsx)(n,{className:`w-3 h-3 ${n0e(e.device_class)} ${c}`}),(0,G.jsx)(`span`,{className:k9(e,r,i,a,o),children:O9(e,s)})]},e.id)})}),m&&(()=>{let e=VT(m);return(0,G.jsxs)(`span`,{title:m.name,className:`flex items-center gap-[3px] ml-auto`,children:[(0,G.jsx)(e,{className:`w-3 h-3 ${n0e(m.device_class)}`}),(0,G.jsx)(`span`,{className:k9(m,r,i,a,o),children:O9(m,s)})]},m.id)})()]})}function i0e({spool:e,remaining:t,pct:n,isSelected:r,onToggleSelected:i,onEdit:a,onCopy:o,onRestore:s,onArchive:c,onDelete:l,onPrintLabel:u,onResetConsumedCounter:d,visibleColumns:f,assignmentMap:p,catalogMap:m,locationReadingsMap:h,currencySymbol:g,dateFormat:_,t:v,onSyncWeight:y,colorizeLocationSensors:b,locationSensorAboveColor:x,locationSensorBelowColor:S,locationSensorOptimalColor:C}){return(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/50 hover:bg-bambu-dark-tertiary/30 transition-colors cursor-pointer ${e.archived_at?`opacity-50`:``} ${r?`bg-bambu-green/10`:``}`,onClick:a,children:[(0,G.jsx)(`td`,{className:`w-10 px-3 py-3`,onClick:e=>e.stopPropagation(),children:i&&(0,G.jsx)(`input`,{type:`checkbox`,className:`h-4 w-4 cursor-pointer`,"aria-label":v(`inventory.bulk.selectRow`),checked:!!r,onChange:i})}),f.map(r=>(0,G.jsx)(`td`,{className:`py-3 px-4`,children:T9[r]?.({spool:e,remaining:t,pct:n,assignmentMap:p,catalogMap:m,locationReadingsMap:h,currencySymbol:g,dateFormat:_,t:v,onSyncWeight:y,colorizeLocationSensors:b,locationSensorAboveColor:x,locationSensorBelowColor:S,locationSensorOptimalColor:C})},r)),(0,G.jsx)(`td`,{className:`py-3 px-4`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-1`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(`button`,{onClick:a,className:`p-1.5 text-bambu-gray hover:text-white rounded transition-colors`,title:v(`common.edit`),children:(0,G.jsx)(Ol,{className:`w-4 h-4`})}),o&&(0,G.jsx)(`button`,{onClick:o,className:`p-1.5 text-bambu-gray hover:text-bambu-green rounded transition-colors`,title:v(`inventory.copySpool`),children:(0,G.jsx)(Vs,{className:`w-4 h-4`})}),u&&(0,G.jsx)(`button`,{onClick:u,className:`p-1.5 text-bambu-gray hover:text-white rounded transition-colors`,title:v(`inventory.labels.printOne`),children:(0,G.jsx)(Ll,{className:`w-4 h-4`})}),d&&e.weight_used>0&&(0,G.jsx)(`button`,{onClick:d,className:`p-1.5 text-bambu-gray hover:text-orange-600 dark:hover:text-orange-400 rounded transition-colors`,title:v(`inventory.resetConsumedCounterTooltip`),children:(0,G.jsx)(tc,{className:`w-4 h-4`})}),e.archived_at?(0,G.jsx)(`button`,{onClick:s,className:`p-1.5 text-bambu-gray hover:text-bambu-green rounded transition-colors`,title:v(`inventory.restore`),children:(0,G.jsx)(Ul,{className:`w-4 h-4`})}):(0,G.jsx)(`button`,{onClick:c,className:`p-1.5 text-bambu-gray hover:text-yellow-600 dark:hover:text-yellow-400 rounded transition-colors`,title:v(`inventory.archive`),children:(0,G.jsx)(Po,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:l,className:`p-1.5 text-bambu-gray hover:text-red-600 dark:hover:text-red-400 rounded transition-colors`,title:v(`common.delete`),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})})]})}function a0e({spools:e,headerSpool:t,remaining:n,pct:r,isExpanded:i,onToggle:a,onEdit:o,onCopy:s,onArchive:c,onDelete:l,onPrintLabel:u,onResetConsumedCounter:d,visibleColumns:f,assignmentMap:p,catalogMap:m,locationReadingsMap:h,currencySymbol:g,dateFormat:_,t:v,onSyncWeight:y,colorizeLocationSensors:b,locationSensorAboveColor:x,locationSensorBelowColor:S,locationSensorOptimalColor:C,selectedIds:w,onToggleSelected:T,onToggleGroupSelected:E}){let D=!!w&&e.every(e=>w.has(e.id));return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/50 hover:bg-bambu-dark-tertiary/30 transition-colors cursor-pointer bg-bambu-green/5`,onClick:a,children:[(0,G.jsx)(`td`,{className:`w-10 px-3 py-3`,onClick:e=>e.stopPropagation(),children:E&&(0,G.jsx)(`input`,{type:`checkbox`,className:`h-4 w-4 cursor-pointer`,"aria-label":v(`inventory.bulk.selectGroup`),checked:D,onChange:t=>E(e.map(e=>e.id),t.target.checked)})}),f.map((a,o)=>(0,G.jsx)(`td`,{className:`py-3 px-4`,children:o===0?(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray transition-transform ${i?``:`-rotate-90`}`}),T9[a]?.({spool:t,remaining:n,pct:r,assignmentMap:p,catalogMap:m,locationReadingsMap:h,currencySymbol:g,dateFormat:_,t:v,onSyncWeight:y,colorizeLocationSensors:b,locationSensorAboveColor:x,locationSensorBelowColor:S,locationSensorOptimalColor:C})]}):a===`id`?(0,G.jsx)(`span`,{className:`text-xs font-medium bg-bambu-green/20 text-bambu-green px-2 py-0.5 rounded-full`,children:v(`inventory.groupedSpools`,{count:e.length})}):T9[a]?.({spool:t,remaining:n,pct:r,assignmentMap:p,catalogMap:m,locationReadingsMap:h,currencySymbol:g,dateFormat:_,t:v,onSyncWeight:y,colorizeLocationSensors:b,locationSensorAboveColor:x,locationSensorBelowColor:S,locationSensorOptimalColor:C})},a)),(0,G.jsx)(`td`,{className:`py-3 px-4`,children:(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:e.map(e=>`#${e.id}`).join(`, `)})})]}),i&&e.map(e=>{let t=Math.max(0,e.label_weight-e.weight_used);return(0,G.jsx)(i0e,{spool:e,remaining:t,pct:e.label_weight>0?t/e.label_weight*100:0,isSelected:w?.has(e.id),onToggleSelected:T?()=>T(e.id):void 0,onEdit:()=>o(e),onCopy:s?()=>s(e):void 0,onRestore:()=>{},onArchive:()=>c(e.id),onDelete:()=>l(e.id),onPrintLabel:u?()=>u(e.id):void 0,onResetConsumedCounter:d?()=>d(e.id):void 0,visibleColumns:f,assignmentMap:p,catalogMap:m,locationReadingsMap:h,currencySymbol:g,dateFormat:_,t:v,onSyncWeight:y,colorizeLocationSensors:b,locationSensorAboveColor:x,locationSensorBelowColor:S,locationSensorOptimalColor:C},e.id)})]})}function o0e({hasFilters:e,onAddSpool:t,t:n}){return(0,G.jsxs)(`div`,{className:`flex flex-col items-center justify-center py-16 px-4`,children:[(0,G.jsxs)(`div`,{className:`relative mb-6`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 -m-4 bg-bambu-green/5 rounded-full blur-2xl`}),(0,G.jsxs)(`div`,{className:`relative flex items-center justify-center w-24 h-24 rounded-2xl bg-gradient-to-br from-bambu-dark-secondary to-bambu-dark-tertiary border border-bambu-dark-tertiary shadow-lg`,children:[(0,G.jsx)(`div`,{className:`absolute -top-1 -right-1 w-3 h-3 rounded-full bg-bambu-green/30`}),(0,G.jsx)(`div`,{className:`absolute -bottom-2 -left-2 w-2 h-2 rounded-full bg-bambu-green/20`}),e?(0,G.jsx)(Zl,{className:`w-10 h-10 text-bambu-gray/40`,strokeWidth:1.5}):(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`div`,{className:`w-14 h-14 rounded-full border-4 border-bambu-gray/20 flex items-center justify-center`,children:(0,G.jsx)(`div`,{className:`w-6 h-6 rounded-full bg-bambu-gray/10 border-2 border-bambu-gray/20`})}),(0,G.jsx)(`div`,{className:`absolute -bottom-1 -right-1 w-6 h-6 rounded-full bg-bambu-green flex items-center justify-center shadow-md`,children:(0,G.jsx)(`span`,{className:`text-white text-lg font-bold leading-none`,children:`+`})})]})]})]}),(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white mb-2 text-center`,children:e?n(`inventory.noSpoolsMatch`):n(`inventory.noSpools`).split(`.`)[0]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray text-center max-w-sm mb-6`,children:n(e?`inventory.noSpoolsMatchDesc`:`inventory.noSpools`)}),!e&&(0,G.jsxs)(Q,{onClick:t,children:[(0,G.jsx)(Sl,{className:`w-4 h-4`}),n(`inventory.addSpool`)]})]})}function A9(e,t){let n=e?.[t];return typeof n==`string`?n:``}function s0e(e){return e.replace(/(https?:\/\/(?:makerworld|public-cdn)\.bblmw\.com\/[^\s"']+)/gi,e=>`/api/v1/makerworld/thumbnail?url=${encodeURIComponent(e)}`)}function j9(e){return e?/^https?:\/\/(makerworld|public-cdn)\.bblmw\.com\//i.test(e)?`/api/v1/makerworld/thumbnail?url=${encodeURIComponent(e)}`:e:``}function M9(e,t){let n=e?.[t];return typeof n==`number`?n:null}function c0e(e,t){let n=e?.[t];return n&&typeof n==`object`&&!Array.isArray(n)?n:void 0}function l0e(e,t=0,n=[]){n.push({folder:e,depth:t});for(let r of e.children??[])l0e(r,t+1,n);return n}function u0e(e,t){return t(e<1?`makerworld.phaseResolving`:`makerworld.phaseDownloading`)}function d0e(e){let[t,n]=(0,y.useState)(0);return(0,y.useEffect)(()=>{if(!e){n(0);return}let t=Date.now(),r=()=>n(Math.floor((Date.now()-t)/1e3));r();let i=window.setInterval(r,1e3);return()=>window.clearInterval(i)},[e]),t}function f0e(){let{t:e}=U(),{hasPermission:t}=jd(),{showToast:n}=Gd(),r=co(),i=t(`makerworld:import`),[a,o]=(0,y.useState)(``),[s,c]=(0,y.useState)(null),[l,u]=(0,y.useState)(null),[d,f]=(0,y.useState)(null),[p,m]=(0,y.useState)(null),[h,g]=(0,y.useState)(null),[_,v]=(0,y.useState)(``),[b,x]=(0,y.useState)({}),S=K({queryKey:[`makerworld-status`],queryFn:()=>Z.getMakerworldStatus()}),C=K({queryKey:[`library-folders`],queryFn:()=>Z.getLibraryFolders()}),w=K({queryKey:[`makerworld-recent-imports`],queryFn:()=>Z.getMakerworldRecentImports(10)}),T=K({queryKey:[`settings`],queryFn:()=>Z.getSettings()}),E=T.data?.use_slicer_api??!1,D=T.data?.preferred_slicer||`bambu_studio`,O=qG(T.data?.open_in_slicer,T.data?.preferred_slicer),k=E?D:O,A=k===`orcaslicer`?`OrcaSlicer`:`Bambu Studio`,[j,M]=(0,y.useState)(null),N=(e,t)=>{M({kind:`libraryFile`,id:e,filename:t})},P=q({mutationFn:e=>Z.resolveMakerworldUrl(e),onSuccess:(e,t)=>{c(e),v(t),x({})},onError:t=>n(t.message||e(`makerworld.errors.resolveFailed`),`error`)});(0,y.useEffect)(()=>{s!==null&&a.trim()!==_.trim()&&(c(null),v(``),x({}))},[a,s,_]);let F=q({mutationFn:({instanceId:e,profileId:t})=>Z.importMakerworldInstance(s?.model_id??0,e,t,l),onSuccess:t=>{r.invalidateQueries({queryKey:[`library-files`]}),r.invalidateQueries({queryKey:[`library-folders`]}),t.profile_id&&x(e=>({...e,[t.profile_id]:t})),n(t.was_existing?e(`makerworld.alreadyInLibrary`):e(`makerworld.importSuccess`,{filename:t.filename}),`success`)},onError:t=>n(t.message||e(`makerworld.errors.downloadFailed`),`error`)}),I=q({mutationFn:({libraryFileId:e})=>Z.deleteLibraryFile(e),onSuccess:(t,{profileId:i})=>{r.invalidateQueries({queryKey:[`library-files`]}),r.invalidateQueries({queryKey:[`library-folders`]}),r.invalidateQueries({queryKey:[`makerworld-recent-imports`]}),x(e=>{let t={...e};return delete t[i],t}),m(null),n(e(`makerworld.importDeleted`),`success`)},onError:t=>{m(null),n(t.message||e(`makerworld.errors.deleteFailed`),`error`)}}),L=q({mutationFn:({instanceId:e,profileId:t})=>Z.importMakerworldInstance(s?.model_id??0,e,t,l),onSuccess:async e=>{r.invalidateQueries({queryKey:[`library-files`]}),r.invalidateQueries({queryKey:[`library-folders`]}),r.invalidateQueries({queryKey:[`makerworld-recent-imports`]}),e.profile_id&&x(t=>({...t,[e.profile_id]:e})),E?N(e.library_file_id,e.filename):await te(e.library_file_id,e.filename,k)},onError:t=>n(t.message||e(`makerworld.errors.downloadFailed`),`error`)}),R=d0e(F.isPending||L.isPending),z=u0e(R,e),B=e=>{e?.preventDefault();let t=a.trim();t&&P.mutate(t)};(0,y.useEffect)(()=>{if(!h)return;let e=e=>{e.key===`Escape`?g(null):e.key===`ArrowLeft`?g(e=>e&&e.index>0?{...e,index:e.index-1}:e):e.key===`ArrowRight`&&g(e=>e&&e.index<e.images.length-1?{...e,index:e.index+1}:e)};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[h]);let V=e=>{let t=(Array.isArray(e.pictures)?e.pictures:[]).filter(e=>typeof e==`object`&&!!e).map(e=>({name:A9(e,`name`)||`image`,url:A9(e,`url`)})).filter(e=>e.url);if(t.length>0)return t;let n=A9(e,`cover`);return n?[{name:`cover`,url:n}]:[]},ee=async()=>{if(!s)return;let e=s.instances.filter(e=>{let t=M9(e,`profileId`);return t!==null&&!b[t]});if(e.length!==0){f({current:0,total:e.length});try{for(let t=0;t<e.length;t+=1){let n=e[t],r=M9(n,`id`),i=M9(n,`profileId`);if(!(r===null||i===null)){f({current:t+1,total:e.length});try{await F.mutateAsync({instanceId:r,profileId:i})}catch{}}}}finally{f(null)}}},te=async(e,t,n)=>{try{let{token:r}=await Z.createLibrarySlicerToken(e),i=Z.getLibrarySlicerDownloadUrl(e,r,t);ZG(`${window.location.origin}${i}`,n)}catch{let t=Z.getLibraryFileDownloadUrl(e);ZG(`${window.location.origin}${t}`,n)}},ne=s?.design,re=c0e(ne,`designCreator`),ie=s?.instances??[],ae=(s?.already_imported_library_ids.length??0)>0,oe=S.data?.can_download??!1,se=S.data?.sign_in_expired??!1,H=(0,y.useMemo)(()=>A9(ne,`coverUrl`),[ne]),ce=A9(ne,`title`),le=A9(ne,`summary`),ue=A9(ne,`license`),de=M9(ne,`downloadCount`);return(0,G.jsxs)(`div`,{className:`p-4 md:p-8 max-w-screen-2xl space-y-6`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(kc,{className:`w-7 h-7 text-bambu-green`}),e(`makerworld.title`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:e(`makerworld.description`)})]}),(0,G.jsxs)(`div`,{className:`grid gap-6 lg:grid-cols-[1fr_20rem]`,children:[(0,G.jsxs)(`div`,{className:`space-y-6 min-w-0`,children:[!oe&&(0,G.jsx)(Ld,{className:`border-amber-300 dark:border-amber-700 bg-amber-50 dark:bg-amber-900/20`,children:(0,G.jsx)(zd,{children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3 py-2`,children:[(0,G.jsx)(ys,{className:`w-5 h-5 text-amber-600 dark:text-amber-400 mt-0.5 shrink-0`}),(0,G.jsxs)(`div`,{className:`text-sm`,children:[(0,G.jsx)(`p`,{className:`font-medium text-amber-900 dark:text-amber-100`,children:e(se?`makerworld.signInExpiredTitle`:`makerworld.signInRequiredTitle`)}),(0,G.jsxs)(`p`,{className:`text-amber-800 dark:text-amber-200 mt-1`,children:[e(se?`makerworld.signInExpiredBody`:`makerworld.signInRequiredBody`),` `,(0,G.jsx)(Ai,{to:`/profiles`,className:`underline`,children:e(`makerworld.openCloudSettings`)})]})]})]})})}),(0,G.jsxs)(Ld,{children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold`,children:e(`makerworld.pasteUrlHeader`)})}),(0,G.jsx)(zd,{children:(0,G.jsxs)(`form`,{onSubmit:B,className:`flex gap-2`,children:[(0,G.jsx)(`input`,{type:`text`,value:a,onChange:e=>o(e.target.value),placeholder:e(`makerworld.pasteUrlPlaceholder`),className:`flex-1 min-w-0 px-3 py-2 border rounded bg-white dark:bg-gray-800 border-gray-300 dark:border-gray-700`,autoComplete:`off`}),(0,G.jsxs)(Q,{type:`submit`,variant:`primary`,disabled:!a.trim()||P.isPending,children:[P.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(zo,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`ml-2`,children:e(`makerworld.resolveButton`)})]})]})})]}),s&&(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{children:(0,G.jsxs)(`div`,{className:`flex gap-4 py-2`,children:[H&&(0,G.jsx)(`img`,{src:j9(H),alt:ce,className:`w-32 h-32 object-cover rounded`,loading:`lazy`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`h3`,{className:`text-xl font-semibold truncate`,children:ce||e(`makerworld.untitledModel`)}),re&&(0,G.jsx)(`p`,{className:`text-sm text-gray-600 dark:text-gray-400 mt-1`,children:e(`makerworld.byCreator`,{name:A9(re,`name`)})}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-3 mt-2 text-xs text-gray-500 dark:text-gray-400`,children:[de!==null&&(0,G.jsx)(`span`,{children:e(`makerworld.downloadsCount`,{count:de})}),ue&&(0,G.jsxs)(`span`,{children:[e(`makerworld.licensePrefix`),`: `,ue]}),ae&&(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 text-emerald-600 dark:text-emerald-400`,children:[(0,G.jsx)(fs,{className:`w-3 h-3`}),` `,e(`makerworld.alreadyImported`)]})]}),le&&(0,G.jsx)(`div`,{className:`mt-3 text-sm prose prose-sm max-w-none dark:prose-invert line-clamp-3`,dangerouslySetInnerHTML:{__html:$K.sanitize(s0e(le))}}),s&&(0,G.jsxs)(`a`,{href:`https://makerworld.com/models/${s.model_id}${s.profile_id?`#profileId-${s.profile_id}`:``}`,target:`_blank`,rel:`noopener noreferrer`,className:`mt-3 inline-flex items-center gap-1 text-xs text-brand-500 hover:underline`,children:[(0,G.jsx)(nc,{className:`w-3 h-3`}),` `,e(`makerworld.openOnMakerworld`)]})]})]})})}),s&&ie.length>0&&(0,G.jsxs)(Ld,{children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center justify-between gap-3`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold`,children:e(`makerworld.platesHeader`,{count:ie.length})}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2`,children:[(0,G.jsx)(`label`,{className:`text-xs text-gray-600 dark:text-gray-400`,children:e(`makerworld.importTo`)}),(0,G.jsxs)(`select`,{value:l??``,onChange:e=>u(e.target.value?Number(e.target.value):null),className:`text-sm px-2 py-1 border rounded bg-white dark:bg-gray-800 border-gray-300 dark:border-gray-700`,disabled:d!==null,children:[(0,G.jsx)(`option`,{value:``,children:e(`makerworld.folderAuto`)}),(C.data??[]).filter(e=>!(e.is_external&&e.external_readonly)).flatMap(e=>l0e(e)).map(({folder:e,depth:t})=>(0,G.jsx)(`option`,{value:e.id,children:`${`— `.repeat(t)}${e.name}`},e.id))]}),(0,G.jsx)(Q,{variant:`primary`,size:`sm`,disabled:!i||!oe||d!==null||F.isPending||L.isPending,onClick:ee,children:d===null?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`ml-2`,children:e(`makerworld.importAll`)})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),(0,G.jsxs)(`span`,{className:`ml-2`,children:[e(`makerworld.importAllProgress`,{current:d.current,total:d.total}),R>0&&` · ${z} · ${R}s`]})]})})]})]})}),(0,G.jsx)(zd,{children:(0,G.jsx)(`div`,{className:`grid gap-3`,children:ie.map((t,n)=>{let r=M9(t,`id`),a=M9(t,`profileId`),o=A9(t,`title`),s=A9(t,`cover`),c=M9(t,`materialCnt`),l=t?.needAms===!0,u=M9(t,`downloadCount`),f=t?.compatibility??null,p=t?.otherCompatibility??null,h=f?.devProductName??null,_=Array.isArray(p)?p.map(e=>e?.devProductName??``).filter(Boolean):[];if(r==null)return null;let v=F.isPending&&F.variables?.instanceId===r,y=L.isPending&&L.variables?.instanceId===r,x=a===null?void 0:b[a];return(0,G.jsxs)(`div`,{className:`flex flex-col gap-2 p-3 border rounded border-gray-200 dark:border-gray-700`,children:[(0,G.jsxs)(`div`,{className:`flex gap-3 items-center`,children:[(()=>{let n=V(t),r=n.length>0;return(0,G.jsxs)(`button`,{type:`button`,disabled:!r,onClick:()=>r&&g({images:n,index:0}),className:`relative w-16 h-16 shrink-0 rounded overflow-hidden group`,"aria-label":e(`makerworld.openGallery`),children:[s?(0,G.jsx)(`img`,{src:j9(s),alt:``,className:`w-16 h-16 object-cover`,loading:`lazy`}):(0,G.jsx)(`div`,{className:`w-16 h-16 bg-gray-100 dark:bg-gray-800`}),n.length>1&&(0,G.jsxs)(`span`,{className:`absolute bottom-0.5 right-0.5 bg-black/70 text-white text-[10px] px-1.5 py-0.5 rounded flex items-center gap-1`,children:[(0,G.jsx)(Hc,{className:`w-2.5 h-2.5`}),n.length]})]})})(),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`font-medium truncate`,children:o||e(`makerworld.plateDefaultName`,{n:n+1})}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-3 text-xs text-gray-500 dark:text-gray-400 mt-1`,children:[h&&(0,G.jsx)(`span`,{className:`font-medium text-gray-700 dark:text-gray-300`,children:e(`makerworld.slicedFor`,{printer:h,defaultValue:`Sliced for {{printer}}`})}),c!==null&&(0,G.jsx)(`span`,{children:e(`makerworld.materialCount`,{count:c})}),l&&(0,G.jsx)(`span`,{children:e(`makerworld.amsRequired`)}),u!==null&&(0,G.jsx)(`span`,{children:e(`makerworld.downloadsCount`,{count:u})})]}),_.length>0&&(0,G.jsx)(`p`,{className:`text-xs text-gray-500 dark:text-gray-400 mt-1`,title:_.join(`, `),children:e(`makerworld.alsoCompatible`,{printers:_.slice(0,6).join(`, `)+(_.length>6?`…`:``),defaultValue:`Also marked compatible: {{printers}}`})})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 shrink-0`,children:[(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,disabled:!i||!oe||v||y||d!==null,onClick:()=>F.mutate({instanceId:r,profileId:a}),title:oe?void 0:e(`makerworld.signInRequiredTitle`),children:v?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),(0,G.jsxs)(`span`,{className:`ml-2`,children:[z,R>0&&` · ${R}s`]})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`ml-2`,children:e(`makerworld.importToLibrary`)})]})}),(0,G.jsx)(Q,{variant:`primary`,size:`sm`,disabled:!i||!oe||v||y||d!==null,onClick:()=>L.mutate({instanceId:r,profileId:a}),title:oe?void 0:e(`makerworld.signInRequiredTitle`),children:y?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),(0,G.jsxs)(`span`,{className:`ml-2`,children:[z,R>0&&` · ${R}s`]})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(nc,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`ml-2`,children:e(`makerworld.sliceIn`,{slicer:A})})]})})]})]}),x&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 pl-20 text-xs`,children:[(0,G.jsx)(fs,{className:`w-3.5 h-3.5 text-emerald-600 dark:text-emerald-400 shrink-0`}),(0,G.jsx)(`span`,{className:`text-emerald-700 dark:text-emerald-300`,children:x.was_existing?e(`makerworld.lastImportAlreadyInLibrary`):e(`makerworld.lastImportSuccess`)}),(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:()=>{let e=x.folder_id?`/files?folder=${x.folder_id}`:`/files`;window.location.assign(e)},children:[(0,G.jsx)(_c,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`span`,{className:`ml-1.5`,children:e(`makerworld.viewInLibrary`)})]}),E?(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:()=>N(x.library_file_id,x.filename),children:[(0,G.jsx)(Rs,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`span`,{className:`ml-1.5`,children:e(`slice.action`,`Slice`)})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:()=>te(x.library_file_id,x.filename,`bambu_studio`),children:[(0,G.jsx)(nc,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`span`,{className:`ml-1.5`,children:e(`makerworld.openInBambuStudio`)})]}),(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:()=>te(x.library_file_id,x.filename,`orcaslicer`),children:[(0,G.jsx)(nc,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`span`,{className:`ml-1.5`,children:e(`makerworld.openInOrcaSlicer`)})]})]}),(0,G.jsx)(`div`,{className:`ml-auto`,children:(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,disabled:I.isPending&&I.variables?.profileId===a,onClick:()=>{a!==null&&m({libraryFileId:x.library_file_id,profileId:a,filename:x.filename})},title:e(`makerworld.deleteImport`),children:I.isPending&&I.variables?.profileId===a?(0,G.jsx)(Y,{className:`w-3.5 h-3.5 animate-spin`}):(0,G.jsx)(Nu,{className:`w-3.5 h-3.5 text-red-500`})})})]})]},r)})})})]})]}),(0,G.jsx)(`aside`,{className:`lg:sticky lg:top-6 lg:self-start min-w-0`,children:w.data&&w.data.length>0&&(0,G.jsxs)(Ld,{children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-base font-semibold`,children:e(`makerworld.recentImportsHeader`)})}),(0,G.jsx)(zd,{children:(0,G.jsx)(`div`,{className:`flex flex-col gap-2 max-h-[28rem] overflow-y-auto -mx-2 px-2`,children:w.data.map(t=>(0,G.jsxs)(`div`,{className:`flex gap-2 p-2 border rounded border-gray-200 dark:border-gray-700`,children:[t.thumbnail_path?(0,G.jsx)(`img`,{src:Z.getLibraryFileThumbnailUrl(t.library_file_id),alt:``,className:`w-12 h-12 shrink-0 object-cover rounded bg-gray-100 dark:bg-gray-800`,loading:`lazy`}):(0,G.jsx)(`div`,{className:`w-12 h-12 shrink-0 rounded bg-gray-100 dark:bg-gray-800`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0 flex flex-col gap-1`,children:[(0,G.jsx)(`p`,{className:`text-xs font-medium truncate`,title:t.filename,children:t.filename}),(0,G.jsxs)(`div`,{className:`flex gap-0.5`,children:[(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>{let e=t.folder_id?`/files?folder=${t.folder_id}`:`/files`;window.location.assign(e)},title:e(`makerworld.viewInLibrary`),children:(0,G.jsx)(_c,{className:`w-3.5 h-3.5`})}),E?(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>N(t.library_file_id,t.filename),title:e(`slice.action`,`Slice`),children:(0,G.jsx)(Rs,{className:`w-3.5 h-3.5`})}):(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>te(t.library_file_id,t.filename,`bambu_studio`),title:e(`makerworld.openInBambuStudio`),children:(0,G.jsx)(nc,{className:`w-3.5 h-3.5`})}),t.source_url&&(0,G.jsx)(`a`,{href:t.source_url,target:`_blank`,rel:`noopener noreferrer`,className:`inline-flex items-center justify-center h-7 w-7 rounded text-gray-500 hover:text-gray-700 dark:hover:text-gray-300`,title:e(`makerworld.openOnMakerworld`),children:(0,G.jsx)(kc,{className:`w-3.5 h-3.5`})})]})]})]},t.library_file_id))})})]})})]}),(0,G.jsx)(`p`,{className:`text-xs text-gray-500 dark:text-gray-400 pt-4 border-t border-gray-200 dark:border-gray-700`,children:e(`makerworld.disclaimer`)}),p&&(0,G.jsx)(rf,{title:e(`makerworld.deleteImport`),message:e(`makerworld.confirmDelete`,{filename:p.filename}),confirmText:e(`makerworld.deleteImport`),variant:`danger`,isLoading:I.isPending,loadingText:e(`makerworld.importDeleting`),onCancel:()=>m(null),onConfirm:()=>I.mutate({libraryFileId:p.libraryFileId,profileId:p.profileId})}),j&&(0,G.jsx)(UG,{source:j,onClose:()=>M(null)}),h&&(0,G.jsxs)(`div`,{className:`fixed inset-0 bg-black/90 flex items-center justify-center z-50`,onClick:()=>g(null),role:`dialog`,"aria-modal":`true`,children:[(0,G.jsx)(`button`,{type:`button`,className:`absolute top-4 right-4 p-2 bg-white/10 hover:bg-white/20 rounded-full text-white`,onClick:e=>{e.stopPropagation(),g(null)},"aria-label":e(`common.close`,`Close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})}),h.images.length>1&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`button`,{type:`button`,className:`absolute left-4 p-2 bg-white/10 hover:bg-white/20 rounded-full text-white disabled:opacity-30`,disabled:h.index===0,onClick:e=>{e.stopPropagation(),g(e=>e&&{...e,index:Math.max(0,e.index-1)})},"aria-label":e(`makerworld.galleryPrev`),children:(0,G.jsx)(hs,{className:`w-6 h-6`})}),(0,G.jsx)(`button`,{type:`button`,className:`absolute right-4 p-2 bg-white/10 hover:bg-white/20 rounded-full text-white disabled:opacity-30`,disabled:h.index>=h.images.length-1,onClick:e=>{e.stopPropagation(),g(e=>e&&{...e,index:Math.min(e.images.length-1,e.index+1)})},"aria-label":e(`makerworld.galleryNext`),children:(0,G.jsx)(ms,{className:`w-6 h-6`})})]}),(0,G.jsx)(`img`,{src:j9(h.images[h.index].url),alt:h.images[h.index].name,className:`max-w-[90vw] max-h-[90vh] object-contain`,onClick:e=>e.stopPropagation()}),h.images.length>1&&(0,G.jsxs)(`div`,{className:`absolute bottom-6 left-1/2 -translate-x-1/2 text-white bg-black/60 px-3 py-1 rounded text-xs`,children:[h.index+1,` / `,h.images.length]})]})]})}var p0e=[`DEBUG`,`INFO`,`WARNING`,`ERROR`],N9={DEBUG:`text-gray-400`,INFO:`text-blue-400`,WARNING:`text-yellow-400`,ERROR:`text-red-400`},m0e={DEBUG:$o,INFO:Uc,WARNING:Iu,ERROR:ys};function h0e(){let e=co(),[t,n]=(0,y.useState)(!0),[r,i]=(0,y.useState)(new Set),[a,o]=(0,y.useState)(``),[s,c]=(0,y.useState)(`ALL`),[l,u]=(0,y.useState)(!1),[d,f]=(0,y.useState)(!1),p=(0,y.useRef)(null),{data:m,isLoading:h,refetch:g}=K({queryKey:[`application-logs`,s,a],queryFn:()=>Ed.getLogs({limit:200,level:s===`ALL`?void 0:s,search:a||void 0}),refetchInterval:d?2e3:!1,enabled:l});(0,y.useEffect)(()=>{l||f(!1)},[l]);let _=q({mutationFn:()=>Ed.clearLogs(),onSuccess:()=>{e.invalidateQueries({queryKey:[`application-logs`]})}});(0,y.useEffect)(()=>{t&&p.current&&m?.entries&&(p.current.scrollTop=p.current.scrollHeight)},[m?.entries,t]);let v=e=>{i(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},b=e=>{let t=e.split(` `);return t.length>=2?t[1]:e},x=(0,y.useMemo)(()=>m?.entries??[],[m?.entries]),S=(0,y.useMemo)(()=>[...x].reverse(),[x]),C=({level:e})=>(0,G.jsx)(m0e[e]||Uc,{className:`w-3.5 h-3.5 ${N9[e]||`text-gray-400`}`});return(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg overflow-hidden`,children:[(0,G.jsxs)(`button`,{onClick:()=>u(!l),className:`w-full flex items-center justify-between p-4 hover:bg-bambu-dark-tertiary/50 transition-colors`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg ${d?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:(0,G.jsx)($o,{className:`w-5 h-5`})}),(0,G.jsxs)(`div`,{className:`text-left`,children:[(0,G.jsx)(`p`,{className:`font-medium text-white`,children:`Application Logs`}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:d?`Live streaming - ${m?.filtered_count??0} entries`:`View and filter application logs`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[d&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1.5 px-2 py-1 bg-bambu-green/20 rounded text-bambu-green text-xs`,children:[(0,G.jsx)(`span`,{className:`w-1.5 h-1.5 bg-bambu-green rounded-full animate-pulse`}),`Live`]}),l?(0,G.jsx)(gs,{className:`w-5 h-5 text-bambu-gray`}):(0,G.jsx)(ps,{className:`w-5 h-5 text-bambu-gray`})]})]}),l&&(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex flex-col gap-2 p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-wrap`,children:[d?(0,G.jsxs)(`button`,{onClick:e=>{e.stopPropagation(),f(!1)},className:`flex items-center gap-1.5 px-3 py-1.5 text-sm bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400 hover:bg-red-200 dark:hover:bg-red-500/30 rounded transition-colors`,children:[(0,G.jsx)(yu,{className:`w-4 h-4`}),`Stop`]}):(0,G.jsxs)(`button`,{onClick:e=>{e.stopPropagation(),f(!0),g()},className:`flex items-center gap-1.5 px-3 py-1.5 text-sm bg-bambu-green/20 text-bambu-green hover:bg-bambu-green/30 rounded transition-colors`,children:[(0,G.jsx)(Ml,{className:`w-4 h-4`}),`Start`]}),(0,G.jsxs)(`button`,{onClick:()=>_.mutate(),disabled:_.isPending||x.length===0,className:`flex items-center gap-1.5 px-3 py-1.5 text-sm bg-bambu-dark-tertiary text-bambu-gray hover:text-white hover:bg-bambu-dark-secondary rounded transition-colors disabled:opacity-50`,children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),`Clear`]}),(0,G.jsx)(`button`,{onClick:()=>g(),disabled:h,className:`flex items-center gap-1.5 px-3 py-1.5 text-sm bg-bambu-dark-tertiary text-bambu-gray hover:text-white hover:bg-bambu-dark-secondary rounded transition-colors disabled:opacity-50`,children:(0,G.jsx)(Vl,{className:`w-4 h-4 ${h?`animate-spin`:``}`})}),(0,G.jsx)(`div`,{className:`flex-1`}),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 text-sm text-bambu-gray cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:t,onChange:e=>n(e.target.checked),className:`rounded border-bambu-dark-tertiary bg-bambu-dark-tertiary`}),`Auto-scroll`]}),(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[m?.filtered_count??0,`/`,m?.total_in_file??0]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsx)(Zl,{className:`absolute left-2.5 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,placeholder:`Search message or logger name...`,value:a,onChange:e=>o(e.target.value),className:`w-full pl-8 pr-8 py-1.5 text-sm bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`}),a&&(0,G.jsx)(`button`,{onClick:()=>o(``),className:`absolute right-2 top-1/2 -translate-y-1/2 text-bambu-gray hover:text-white`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 bg-bambu-dark-secondary rounded border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`button`,{onClick:()=>c(`ALL`),className:`px-2 py-1.5 text-xs rounded-l transition-colors ${s===`ALL`?`bg-bambu-green text-white`:`text-bambu-gray hover:text-white`}`,children:`All`}),p0e.map((e,t)=>(0,G.jsx)(`button`,{onClick:()=>c(e),className:`px-2 py-1.5 text-xs transition-colors flex items-center gap-1 ${t===p0e.length-1?`rounded-r`:``} ${s===e?`${N9[e]} bg-bambu-dark-tertiary`:`text-bambu-gray hover:text-white`}`,children:e},e))]})]})]}),(0,G.jsx)(`div`,{ref:p,className:`overflow-auto font-mono text-xs bg-black min-h-[300px] max-h-[500px]`,children:x.length===0?(0,G.jsxs)(`div`,{className:`flex flex-col items-center justify-center h-[300px] text-bambu-gray`,children:[(0,G.jsx)(`p`,{className:`mb-2`,children:`No log entries found`}),(0,G.jsx)(`p`,{className:`text-sm`,children:`Log file may be empty or cleared`})]}):(0,G.jsx)(`div`,{className:`divide-y divide-bambu-dark-tertiary/30`,children:S.map((e,t)=>{let n=r.has(t),i=e.message.includes(`
+`}),n}function jZe(e){let t=0,n=e.charCodeAt(t);for(;n===9||n===32;)t++,n=e.charCodeAt(t);return e.slice(t)}function MZe(e,t){let n=EZe(e,t),r=n.one(e,void 0),i=pZe(n),a=Array.isArray(r)?{type:`root`,children:r}:r||{type:`root`,children:[]};return i&&(`children`in a,a.children.push({type:`text`,value:`
+`},i)),a}function NZe(e,t){return e&&`run`in e?async function(n,r){let i=MZe(n,{file:r,...t});await e.run(i,r)}:function(n,r){return MZe(n,{file:r,...e||t})}}function PZe(e){if(e)throw e}var FZe=o(((e,t)=>{var n=Object.prototype.hasOwnProperty,r=Object.prototype.toString,i=Object.defineProperty,a=Object.getOwnPropertyDescriptor,o=function(e){return typeof Array.isArray==`function`?Array.isArray(e):r.call(e)===`[object Array]`},s=function(e){if(!e||r.call(e)!==`[object Object]`)return!1;var t=n.call(e,`constructor`),i=e.constructor&&e.constructor.prototype&&n.call(e.constructor.prototype,`isPrototypeOf`);if(e.constructor&&!t&&!i)return!1;for(var a in e);return a===void 0||n.call(e,a)},c=function(e,t){i&&t.name===`__proto__`?i(e,t.name,{enumerable:!0,configurable:!0,value:t.newValue,writable:!0}):e[t.name]=t.newValue},l=function(e,t){if(t===`__proto__`){if(!n.call(e,t))return;if(a)return a(e,t).value}return e[t]};t.exports=function e(){var t,n,r,i,a,u,d=arguments[0],f=1,p=arguments.length,m=!1;for(typeof d==`boolean`&&(m=d,d=arguments[1]||{},f=2),(d==null||typeof d!=`object`&&typeof d!=`function`)&&(d={});f<p;++f)if(t=arguments[f],t!=null)for(n in t)r=l(d,n),i=l(t,n),d!==i&&(m&&i&&(s(i)||(a=o(i)))?(a?(a=!1,u=r&&o(r)?r:[]):u=r&&s(r)?r:{},c(d,{name:n,newValue:e(m,u,i)})):i!==void 0&&c(d,{name:n,newValue:i}));return d}}));function W7(e){if(typeof e!=`object`||!e)return!1;let t=Object.getPrototypeOf(e);return(t===null||t===Object.prototype||Object.getPrototypeOf(t)===null)&&!(Symbol.toStringTag in e)&&!(Symbol.iterator in e)}function IZe(){let e=[],t={run:n,use:r};return t;function n(...t){let n=-1,r=t.pop();if(typeof r!=`function`)throw TypeError(`Expected function as last argument, not `+r);i(null,...t);function i(a,...o){let s=e[++n],c=-1;if(a){r(a);return}for(;++c<t.length;)(o[c]===null||o[c]===void 0)&&(o[c]=t[c]);t=o,s?LZe(s,i)(...o):r(null,...o)}}function r(n){if(typeof n!=`function`)throw TypeError("Expected `middelware` to be a function, not "+n);return e.push(n),t}}function LZe(e,t){let n;return r;function r(...t){let r=e.length>t.length,o;r&&t.push(i);try{o=e.apply(this,t)}catch(e){let t=e;if(r&&n)throw t;return i(t)}r||(o&&o.then&&typeof o.then==`function`?o.then(a,i):o instanceof Error?i(o):a(o))}function i(e,...r){n||(n=!0,t(e,...r))}function a(e){i(null,e)}}var G7={basename:RZe,dirname:zZe,extname:BZe,join:VZe,sep:`/`};function RZe(e,t){if(t!==void 0&&typeof t!=`string`)throw TypeError(`"ext" argument must be a string`);K7(e);let n=0,r=-1,i=e.length,a;if(t===void 0||t.length===0||t.length>e.length){for(;i--;)if(e.codePointAt(i)===47){if(a){n=i+1;break}}else r<0&&(a=!0,r=i+1);return r<0?``:e.slice(n,r)}if(t===e)return``;let o=-1,s=t.length-1;for(;i--;)if(e.codePointAt(i)===47){if(a){n=i+1;break}}else o<0&&(a=!0,o=i+1),s>-1&&(e.codePointAt(i)===t.codePointAt(s--)?s<0&&(r=i):(s=-1,r=o));return n===r?r=o:r<0&&(r=e.length),e.slice(n,r)}function zZe(e){if(K7(e),e.length===0)return`.`;let t=-1,n=e.length,r;for(;--n;)if(e.codePointAt(n)===47){if(r){t=n;break}}else r||=!0;return t<0?e.codePointAt(0)===47?`/`:`.`:t===1&&e.codePointAt(0)===47?`//`:e.slice(0,t)}function BZe(e){K7(e);let t=e.length,n=-1,r=0,i=-1,a=0,o;for(;t--;){let s=e.codePointAt(t);if(s===47){if(o){r=t+1;break}continue}n<0&&(o=!0,n=t+1),s===46?i<0?i=t:a!==1&&(a=1):i>-1&&(a=-1)}return i<0||n<0||a===0||a===1&&i===n-1&&i===r+1?``:e.slice(i,n)}function VZe(...e){let t=-1,n;for(;++t<e.length;)K7(e[t]),e[t]&&(n=n===void 0?e[t]:n+`/`+e[t]);return n===void 0?`.`:HZe(n)}function HZe(e){K7(e);let t=e.codePointAt(0)===47,n=UZe(e,!t);return n.length===0&&!t&&(n=`.`),n.length>0&&e.codePointAt(e.length-1)===47&&(n+=`/`),t?`/`+n:n}function UZe(e,t){let n=``,r=0,i=-1,a=0,o=-1,s,c;for(;++o<=e.length;){if(o<e.length)s=e.codePointAt(o);else if(s===47)break;else s=47;if(s===47){if(!(i===o-1||a===1))if(i!==o-1&&a===2){if(n.length<2||r!==2||n.codePointAt(n.length-1)!==46||n.codePointAt(n.length-2)!==46){if(n.length>2){if(c=n.lastIndexOf(`/`),c!==n.length-1){c<0?(n=``,r=0):(n=n.slice(0,c),r=n.length-1-n.lastIndexOf(`/`)),i=o,a=0;continue}}else if(n.length>0){n=``,r=0,i=o,a=0;continue}}t&&(n=n.length>0?n+`/..`:`..`,r=2)}else n.length>0?n+=`/`+e.slice(i+1,o):n=e.slice(i+1,o),r=o-i-1;i=o,a=0}else s===46&&a>-1?a++:a=-1}return n}function K7(e){if(typeof e!=`string`)throw TypeError(`Path must be a string. Received `+JSON.stringify(e))}var WZe={cwd:GZe};function GZe(){return`/`}function q7(e){return!!(typeof e==`object`&&e&&`href`in e&&e.href&&`protocol`in e&&e.protocol&&e.auth===void 0)}function KZe(e){if(typeof e==`string`)e=new URL(e);else if(!q7(e)){let t=TypeError('The "path" argument must be of type string or an instance of URL. Received `'+e+"`");throw t.code=`ERR_INVALID_ARG_TYPE`,t}if(e.protocol!==`file:`){let e=TypeError(`The URL must be of scheme file`);throw e.code=`ERR_INVALID_URL_SCHEME`,e}return qZe(e)}function qZe(e){if(e.hostname!==``){let e=TypeError(`File URL host must be "localhost" or empty on darwin`);throw e.code=`ERR_INVALID_FILE_URL_HOST`,e}let t=e.pathname,n=-1;for(;++n<t.length;)if(t.codePointAt(n)===37&&t.codePointAt(n+1)===50){let e=t.codePointAt(n+2);if(e===70||e===102){let e=TypeError(`File URL path must not include encoded / characters`);throw e.code=`ERR_INVALID_FILE_URL_PATH`,e}}return decodeURIComponent(t)}var J7=[`history`,`path`,`basename`,`stem`,`extname`,`dirname`],JZe=class{constructor(e){let t;t=e?q7(e)?{path:e}:typeof e==`string`||XZe(e)?{value:e}:e:{},this.cwd=`cwd`in t?``:WZe.cwd(),this.data={},this.history=[],this.messages=[],this.value,this.map,this.result,this.stored;let n=-1;for(;++n<J7.length;){let e=J7[n];e in t&&t[e]!==void 0&&t[e]!==null&&(this[e]=e===`history`?[...t[e]]:t[e])}let r;for(r in t)J7.includes(r)||(this[r]=t[r])}get basename(){return typeof this.path==`string`?G7.basename(this.path):void 0}set basename(e){X7(e,`basename`),Y7(e,`basename`),this.path=G7.join(this.dirname||``,e)}get dirname(){return typeof this.path==`string`?G7.dirname(this.path):void 0}set dirname(e){YZe(this.basename,`dirname`),this.path=G7.join(e||``,this.basename)}get extname(){return typeof this.path==`string`?G7.extname(this.path):void 0}set extname(e){if(Y7(e,`extname`),YZe(this.dirname,`extname`),e){if(e.codePointAt(0)!==46)throw Error("`extname` must start with `.`");if(e.includes(`.`,1))throw Error("`extname` cannot contain multiple dots")}this.path=G7.join(this.dirname,this.stem+(e||``))}get path(){return this.history[this.history.length-1]}set path(e){q7(e)&&(e=KZe(e)),X7(e,`path`),this.path!==e&&this.history.push(e)}get stem(){return typeof this.path==`string`?G7.basename(this.path,this.extname):void 0}set stem(e){X7(e,`stem`),Y7(e,`stem`),this.path=G7.join(this.dirname||``,e+(this.extname||``))}fail(e,t,n){let r=this.message(e,t,n);throw r.fatal=!0,r}info(e,t,n){let r=this.message(e,t,n);return r.fatal=void 0,r}message(e,t,n){let r=new a7(e,t,n);return this.path&&(r.name=this.path+`:`+r.name,r.file=this.path),r.fatal=!1,this.messages.push(r),r}toString(e){return this.value===void 0?``:typeof this.value==`string`?this.value:new TextDecoder(e||void 0).decode(this.value)}};function Y7(e,t){if(e&&e.includes(G7.sep))throw Error("`"+t+"` cannot be a path: did not expect `"+G7.sep+"`")}function X7(e,t){if(!e)throw Error("`"+t+"` cannot be empty")}function YZe(e,t){if(!e)throw Error("Setting `"+t+"` requires `path` to be set too")}function XZe(e){return!!(e&&typeof e==`object`&&`byteLength`in e&&`byteOffset`in e)}var ZZe=(function(e){let t=this.constructor.prototype,n=t[e],r=function(){return n.apply(r,arguments)};return Object.setPrototypeOf(r,t),r}),Z7=l(FZe(),1),QZe={}.hasOwnProperty,$Ze=new class e extends ZZe{constructor(){super(`copy`),this.Compiler=void 0,this.Parser=void 0,this.attachers=[],this.compiler=void 0,this.freezeIndex=-1,this.frozen=void 0,this.namespace={},this.parser=void 0,this.transformers=IZe()}copy(){let t=new e,n=-1;for(;++n<this.attachers.length;){let e=this.attachers[n];t.use(...e)}return t.data((0,Z7.default)(!0,{},this.namespace)),t}data(e,t){return typeof e==`string`?arguments.length===2?(e9(`data`,this.frozen),this.namespace[e]=t,this):QZe.call(this.namespace,e)&&this.namespace[e]||void 0:e?(e9(`data`,this.frozen),this.namespace=e,this):this.namespace}freeze(){if(this.frozen)return this;let e=this;for(;++this.freezeIndex<this.attachers.length;){let[t,...n]=this.attachers[this.freezeIndex];if(n[0]===!1)continue;n[0]===!0&&(n[0]=void 0);let r=t.call(e,...n);typeof r==`function`&&this.transformers.use(r)}return this.frozen=!0,this.freezeIndex=1/0,this}parse(e){this.freeze();let t=t9(e),n=this.parser||this.Parser;return Q7(`parse`,n),n(String(t),t)}process(e,t){let n=this;return this.freeze(),Q7(`process`,this.parser||this.Parser),$7(`process`,this.compiler||this.Compiler),t?r(void 0,t):new Promise(r);function r(r,i){let a=t9(e),o=n.parse(a);n.run(o,a,function(e,t,r){if(e||!t||!r)return s(e);let i=t,a=n.stringify(i,r);rQe(a)?r.value=a:r.result=a,s(e,r)});function s(e,n){e||!n?i(e):r?r(n):t(void 0,n)}}}processSync(e){let t=!1,n;return this.freeze(),Q7(`processSync`,this.parser||this.Parser),$7(`processSync`,this.compiler||this.Compiler),this.process(e,r),tQe(`processSync`,`process`,t),n;function r(e,r){t=!0,PZe(e),n=r}}run(e,t,n){eQe(e),this.freeze();let r=this.transformers;return!n&&typeof t==`function`&&(n=t,t=void 0),n?i(void 0,n):new Promise(i);function i(i,a){let o=t9(t);r.run(e,o,s);function s(t,r,o){let s=r||e;t?a(t):i?i(s):n(void 0,s,o)}}}runSync(e,t){let n=!1,r;return this.run(e,t,i),tQe(`runSync`,`run`,n),r;function i(e,t){PZe(e),r=t,n=!0}}stringify(e,t){this.freeze();let n=t9(t),r=this.compiler||this.Compiler;return $7(`stringify`,r),eQe(e),r(e,n)}use(e,...t){let n=this.attachers,r=this.namespace;if(e9(`use`,this.frozen),e!=null)if(typeof e==`function`)s(e,t);else if(typeof e==`object`)Array.isArray(e)?o(e):a(e);else throw TypeError("Expected usable value, not `"+e+"`");return this;function i(e){if(typeof e==`function`)s(e,[]);else if(typeof e==`object`)if(Array.isArray(e)){let[t,...n]=e;s(t,n)}else a(e);else throw TypeError("Expected usable value, not `"+e+"`")}function a(e){if(!(`plugins`in e)&&!(`settings`in e))throw Error("Expected usable value but received an empty preset, which is probably a mistake: presets typically come with `plugins` and sometimes with `settings`, but this has neither");o(e.plugins),e.settings&&(r.settings=(0,Z7.default)(!0,r.settings,e.settings))}function o(e){let t=-1;if(e!=null)if(Array.isArray(e))for(;++t<e.length;){let n=e[t];i(n)}else throw TypeError("Expected a list of plugins, not `"+e+"`")}function s(e,t){let r=-1,i=-1;for(;++r<n.length;)if(n[r][0]===e){i=r;break}if(i===-1)n.push([e,...t]);else if(t.length>0){let[r,...a]=t,o=n[i][1];W7(o)&&W7(r)&&(r=(0,Z7.default)(!0,o,r)),n[i]=[e,r,...a]}}}}().freeze();function Q7(e,t){if(typeof t!=`function`)throw TypeError("Cannot `"+e+"` without `parser`")}function $7(e,t){if(typeof t!=`function`)throw TypeError("Cannot `"+e+"` without `compiler`")}function e9(e,t){if(t)throw Error("Cannot call `"+e+"` on a frozen processor.\nCreate a new processor first, by calling it: use `processor()` instead of `processor`.")}function eQe(e){if(!W7(e)||typeof e.type!=`string`)throw TypeError("Expected node, got `"+e+"`")}function tQe(e,t,n){if(!n)throw Error("`"+e+"` finished async. Use `"+t+"` instead")}function t9(e){return nQe(e)?e:new JZe(e)}function nQe(e){return!!(e&&typeof e==`object`&&`message`in e&&`messages`in e)}function rQe(e){return typeof e==`string`||iQe(e)}function iQe(e){return!!(e&&typeof e==`object`&&`byteLength`in e&&`byteOffset`in e)}var aQe=[],oQe={allowDangerousHtml:!0},sQe=/^(https?|ircs?|mailto|xmpp)$/i,cQe=[{from:`astPlugins`,id:`remove-buggy-html-in-markdown-parser`},{from:`allowDangerousHtml`,id:`remove-buggy-html-in-markdown-parser`},{from:`allowNode`,id:`replace-allownode-allowedtypes-and-disallowedtypes`,to:`allowElement`},{from:`allowedTypes`,id:`replace-allownode-allowedtypes-and-disallowedtypes`,to:`allowedElements`},{from:`disallowedTypes`,id:`replace-allownode-allowedtypes-and-disallowedtypes`,to:`disallowedElements`},{from:`escapeHtml`,id:`remove-buggy-html-in-markdown-parser`},{from:`includeElementIndex`,id:`#remove-includeelementindex`},{from:`includeNodeIndex`,id:`change-includenodeindex-to-includeelementindex`},{from:`linkTarget`,id:`remove-linktarget`},{from:`plugins`,id:`change-plugins-to-remarkplugins`,to:`remarkPlugins`},{from:`rawSourcePos`,id:`#remove-rawsourcepos`},{from:`renderers`,id:`change-renderers-to-components`,to:`components`},{from:`source`,id:`change-source-to-children`,to:`children`},{from:`sourcePos`,id:`#remove-sourcepos`},{from:`transformImageUri`,id:`#add-urltransform`,to:`urlTransform`},{from:`transformLinkUri`,id:`#add-urltransform`,to:`urlTransform`}];function lQe(e){let t=uQe(e),n=dQe(e);return fQe(t.runSync(t.parse(n),n),e)}function uQe(e){let t=e.rehypePlugins||aQe,n=e.remarkPlugins||aQe,r=e.remarkRehypeOptions?{...e.remarkRehypeOptions,...oQe}:oQe;return $Ze().use(TXe).use(n).use(NZe,r).use(t)}function dQe(e){let t=e.children||``,n=new JZe;return typeof t==`string`?n.value=t:``+t,n}function fQe(e,t){let n=t.allowedElements,r=t.allowElement,i=t.components,a=t.disallowedElements,o=t.skipHtml,s=t.unwrapDisallowed,c=t.urlTransform||pQe;for(let e of cQe)Object.hasOwn(t,e.from)&&``+e.from+(e.to?"use `"+e.to+"` instead":`remove it`)+e.id;return t.className&&(e={type:`element`,tagName:`div`,properties:{className:t.className},children:e.type===`root`?e.children:[e]}),wZe(e,l),jqe(e,{Fragment:G.Fragment,components:i,ignoreInvalidStyle:!0,jsx:G.jsx,jsxs:G.jsxs,passKeys:!0,passNode:!0});function l(e,t,i){if(e.type===`raw`&&i&&typeof t==`number`)return o?i.children.splice(t,1):i.children[t]={type:`text`,value:e.value},t;if(e.type===`element`){let t;for(t in u7)if(Object.hasOwn(u7,t)&&Object.hasOwn(e.properties,t)){let n=e.properties[t],r=u7[t];(r===null||r.includes(e.tagName))&&(e.properties[t]=c(String(n||``),t,e))}}if(e.type===`element`){let o=n?!n.includes(e.tagName):a?a.includes(e.tagName):!1;if(!o&&r&&typeof t==`number`&&(o=!r(e,t,i)),o&&i&&typeof t==`number`)return s&&e.children?i.children.splice(t,1,...e.children):i.children.splice(t,1),t}}}function pQe(e){let t=e.indexOf(`:`),n=e.indexOf(`?`),r=e.indexOf(`#`),i=e.indexOf(`/`);return t===-1||i!==-1&&t>i||n!==-1&&t>n||r!==-1&&t>r||sQe.test(e.slice(0,t))?e:``}CQe.peek=SQe;function mQe(){this.buffer()}function hQe(e){this.enter({type:`footnoteReference`,identifier:``,label:``},e)}function gQe(){this.buffer()}function _Qe(e){this.enter({type:`footnoteDefinition`,identifier:``,label:``,children:[]},e)}function vQe(e){let t=this.resume(),n=this.stack[this.stack.length-1];n.type,n.identifier=m7(this.sliceSerialize(e)).toLowerCase(),n.label=t}function yQe(e){this.exit(e)}function bQe(e){let t=this.resume(),n=this.stack[this.stack.length-1];n.type,n.identifier=m7(this.sliceSerialize(e)).toLowerCase(),n.label=t}function xQe(e){this.exit(e)}function SQe(){return`[`}function CQe(e,t,n,r){let i=n.createTracker(r),a=i.move(`[^`),o=n.enter(`footnoteReference`),s=n.enter(`reference`);return a+=i.move(n.safe(n.associationId(e),{after:`]`,before:a})),s(),o(),a+=i.move(`]`),a}function wQe(){return{enter:{gfmFootnoteCallString:mQe,gfmFootnoteCall:hQe,gfmFootnoteDefinitionLabelString:gQe,gfmFootnoteDefinition:_Qe},exit:{gfmFootnoteCallString:vQe,gfmFootnoteCall:yQe,gfmFootnoteDefinitionLabelString:bQe,gfmFootnoteDefinition:xQe}}}OQe.peek=kQe;function TQe(){return{canContainEols:[`delete`],enter:{strikethrough:EQe},exit:{strikethrough:DQe}}}function EQe(e){this.enter({type:`delete`,children:[]},e)}function DQe(e){this.exit(e)}function OQe(e,t,n,r){let i=n.createTracker(r),a=n.enter(`strikethrough`),o=i.move(`~~`);return o+=n.containerPhrasing(e,{...i.current(),before:o,after:`~`}),o+=i.move(`~~`),a(),o}function kQe(){return`~`}function AQe(){return{enter:{table:jQe,tableData:PQe,tableHeader:PQe,tableRow:NQe},exit:{codeText:FQe,table:MQe,tableData:n9,tableHeader:n9,tableRow:n9}}}function jQe(e){let t=e._align;this.enter({type:`table`,align:t.map(function(e){return e===`none`?null:e}),children:[]},e),this.data.inTable=!0}function MQe(e){this.exit(e),this.data.inTable=void 0}function NQe(e){this.enter({type:`tableRow`,children:[]},e)}function n9(e){this.exit(e)}function PQe(e){this.enter({type:`tableCell`,children:[]},e)}function FQe(e){let t=this.resume();this.data.inTable&&(t=t.replace(/\\([\\|])/g,IQe));let n=this.stack[this.stack.length-1];n.type,n.value=t,this.exit(e)}function IQe(e,t){return t===`|`?t:e}function LQe(){return{exit:{taskListCheckValueChecked:RQe,taskListCheckValueUnchecked:RQe,paragraph:zQe}}}function RQe(e){let t=this.stack[this.stack.length-2];t.type,t.checked=e.type===`taskListCheckValueChecked`}function zQe(e){let t=this.stack[this.stack.length-2];if(t&&t.type===`listItem`&&typeof t.checked==`boolean`){let e=this.stack[this.stack.length-1];e.type;let n=e.children[0];if(n&&n.type===`text`){let r=t.children,i=-1,a;for(;++i<r.length;){let e=r[i];if(e.type===`paragraph`){a=e;break}}a===e&&(n.value=n.value.slice(1),n.value.length===0?e.children.shift():e.position&&n.position&&typeof n.position.start.offset==`number`&&(n.position.start.column++,n.position.start.offset++,e.position.start=Object.assign({},n.position.start)))}}this.exit(e)}var BQe={tokenize:JQe,partial:!0};function VQe(){return{document:{91:{name:`gfmFootnoteDefinition`,tokenize:GQe,continuation:{tokenize:KQe},exit:qQe}},text:{91:{name:`gfmFootnoteCall`,tokenize:WQe},93:{name:`gfmPotentialFootnoteCall`,add:`after`,tokenize:HQe,resolveTo:UQe}}}}function HQe(e,t,n){let r=this,i=r.events.length,a=r.parser.gfmFootnotes||(r.parser.gfmFootnotes=[]),o;for(;i--;){let e=r.events[i][1];if(e.type===`labelImage`){o=e;break}if(e.type===`gfmFootnoteCall`||e.type===`labelLink`||e.type===`label`||e.type===`image`||e.type===`link`)break}return s;function s(i){if(!o||!o._balanced)return n(i);let s=m7(r.sliceSerialize({start:o.end,end:r.now()}));return s.codePointAt(0)!==94||!a.includes(s.slice(1))?n(i):(e.enter(`gfmFootnoteCallLabelMarker`),e.consume(i),e.exit(`gfmFootnoteCallLabelMarker`),t(i))}}function UQe(e,t){let n=e.length;for(;n--;)if(e[n][1].type===`labelImage`&&e[n][0]===`enter`){e[n][1];break}e[n+1][1].type=`data`,e[n+3][1].type=`gfmFootnoteCallLabelMarker`;let r={type:`gfmFootnoteCall`,start:Object.assign({},e[n+3][1].start),end:Object.assign({},e[e.length-1][1].end)},i={type:`gfmFootnoteCallMarker`,start:Object.assign({},e[n+3][1].end),end:Object.assign({},e[n+3][1].end)};i.end.column++,i.end.offset++,i.end._bufferIndex++;let a={type:`gfmFootnoteCallString`,start:Object.assign({},i.end),end:Object.assign({},e[e.length-1][1].start)},o={type:`chunkString`,contentType:`string`,start:Object.assign({},a.start),end:Object.assign({},a.end)},s=[e[n+1],e[n+2],[`enter`,r,t],e[n+3],e[n+4],[`enter`,i,t],[`exit`,i,t],[`enter`,a,t],[`enter`,o,t],[`exit`,o,t],[`exit`,a,t],e[e.length-2],e[e.length-1],[`exit`,r,t]];return e.splice(n,e.length-n+1,...s),e}function WQe(e,t,n){let r=this,i=r.parser.gfmFootnotes||(r.parser.gfmFootnotes=[]),a=0,o;return s;function s(t){return e.enter(`gfmFootnoteCall`),e.enter(`gfmFootnoteCallLabelMarker`),e.consume(t),e.exit(`gfmFootnoteCallLabelMarker`),c}function c(t){return t===94?(e.enter(`gfmFootnoteCallMarker`),e.consume(t),e.exit(`gfmFootnoteCallMarker`),e.enter(`gfmFootnoteCallString`),e.enter(`chunkString`).contentType=`string`,l):n(t)}function l(s){if(a>999||s===93&&!o||s===null||s===91||b7(s))return n(s);if(s===93){e.exit(`chunkString`);let a=e.exit(`gfmFootnoteCallString`);return i.includes(m7(r.sliceSerialize(a)))?(e.enter(`gfmFootnoteCallLabelMarker`),e.consume(s),e.exit(`gfmFootnoteCallLabelMarker`),e.exit(`gfmFootnoteCall`),t):n(s)}return b7(s)||(o=!0),a++,e.consume(s),s===92?u:l}function u(t){return t===91||t===92||t===93?(e.consume(t),a++,l):l(t)}}function GQe(e,t,n){let r=this,i=r.parser.gfmFootnotes||(r.parser.gfmFootnotes=[]),a,o=0,s;return c;function c(t){return e.enter(`gfmFootnoteDefinition`)._container=!0,e.enter(`gfmFootnoteDefinitionLabel`),e.enter(`gfmFootnoteDefinitionLabelMarker`),e.consume(t),e.exit(`gfmFootnoteDefinitionLabelMarker`),l}function l(t){return t===94?(e.enter(`gfmFootnoteDefinitionMarker`),e.consume(t),e.exit(`gfmFootnoteDefinitionMarker`),e.enter(`gfmFootnoteDefinitionLabelString`),e.enter(`chunkString`).contentType=`string`,u):n(t)}function u(t){if(o>999||t===93&&!s||t===null||t===91||b7(t))return n(t);if(t===93){e.exit(`chunkString`);let n=e.exit(`gfmFootnoteDefinitionLabelString`);return a=m7(r.sliceSerialize(n)),e.enter(`gfmFootnoteDefinitionLabelMarker`),e.consume(t),e.exit(`gfmFootnoteDefinitionLabelMarker`),e.exit(`gfmFootnoteDefinitionLabel`),f}return b7(t)||(s=!0),o++,e.consume(t),t===92?d:u}function d(t){return t===91||t===92||t===93?(e.consume(t),o++,u):u(t)}function f(t){return t===58?(e.enter(`definitionMarker`),e.consume(t),e.exit(`definitionMarker`),i.includes(a)||i.push(a),w7(e,p,`gfmFootnoteDefinitionWhitespace`)):n(t)}function p(e){return t(e)}}function KQe(e,t,n){return e.check(O7,t,e.attempt(BQe,t,n))}function qQe(e){e.exit(`gfmFootnoteDefinition`)}function JQe(e,t,n){let r=this;return w7(e,i,`gfmFootnoteDefinitionIndent`,5);function i(e){let i=r.events[r.events.length-1];return i&&i[1].type===`gfmFootnoteDefinitionIndent`&&i[2].sliceSerialize(i[1],!0).length===4?t(e):n(e)}}function YQe(e){let t=(e||{}).singleTilde,n={name:`strikethrough`,tokenize:i,resolveAll:r};return t??=!0,{text:{126:n},insideSpan:{null:[n]},attentionMarkers:{null:[126]}};function r(e,t){let n=-1;for(;++n<e.length;)if(e[n][0]===`enter`&&e[n][1].type===`strikethroughSequenceTemporary`&&e[n][1]._close){let r=n;for(;r--;)if(e[r][0]===`exit`&&e[r][1].type===`strikethroughSequenceTemporary`&&e[r][1]._open&&e[n][1].end.offset-e[n][1].start.offset===e[r][1].end.offset-e[r][1].start.offset){e[n][1].type=`strikethroughSequence`,e[r][1].type=`strikethroughSequence`;let i={type:`strikethrough`,start:Object.assign({},e[r][1].start),end:Object.assign({},e[n][1].end)},a={type:`strikethroughText`,start:Object.assign({},e[r][1].end),end:Object.assign({},e[n][1].start)},o=[[`enter`,i,t],[`enter`,e[r][1],t],[`exit`,e[r][1],t],[`enter`,a,t]],s=t.parser.constructs.insideSpan.null;s&&f7(o,o.length,0,E7(s,e.slice(r+1,n),t)),f7(o,o.length,0,[[`exit`,a,t],[`enter`,e[n][1],t],[`exit`,e[n][1],t],[`exit`,i,t]]),f7(e,r-1,n-r+3,o),n=r+o.length-2;break}}for(n=-1;++n<e.length;)e[n][1].type===`strikethroughSequenceTemporary`&&(e[n][1].type=`data`);return e}function i(e,n,r){let i=this.previous,a=this.events,o=0;return s;function s(t){return i===126&&a[a.length-1][1].type!==`characterEscape`?r(t):(e.enter(`strikethroughSequenceTemporary`),c(t))}function c(a){let s=T7(i);if(a===126)return o>1?r(a):(e.consume(a),o++,c);if(o<2&&!t)return r(a);let l=e.exit(`strikethroughSequenceTemporary`),u=T7(a);return l._open=!u||u===2&&!!s,l._close=!s||s===2&&!!u,n(a)}}}var XQe=class{constructor(){this.map=[]}add(e,t,n){ZQe(this,e,t,n)}consume(e){if(this.map.sort(function(e,t){return e[0]-t[0]}),this.map.length===0)return;let t=this.map.length,n=[];for(;t>0;)--t,n.push(e.slice(this.map[t][0]+this.map[t][1]),this.map[t][2]),e.length=this.map[t][0];n.push(e.slice()),e.length=0;let r=n.pop();for(;r;){for(let t of r)e.push(t);r=n.pop()}this.map.length=0}};function ZQe(e,t,n,r){let i=0;if(!(n===0&&r.length===0)){for(;i<e.map.length;){if(e.map[i][0]===t){e.map[i][1]+=n,e.map[i][2].push(...r);return}i+=1}e.map.push([t,n,r])}}function QQe(e,t){let n=!1,r=[];for(;t<e.length;){let i=e[t];if(n){if(i[0]===`enter`)i[1].type===`tableContent`&&r.push(e[t+1][1].type===`tableDelimiterMarker`?`left`:`none`);else if(i[1].type===`tableContent`){if(e[t-1][1].type===`tableDelimiterMarker`){let e=r.length-1;r[e]=r[e]===`left`?`center`:`right`}}else if(i[1].type===`tableDelimiterRow`)break}else i[0]===`enter`&&i[1].type===`tableDelimiterRow`&&(n=!0);t+=1}return r}function $Qe(){return{flow:{null:{name:`table`,tokenize:e$e,resolveAll:t$e}}}}function e$e(e,t,n){let r=this,i=0,a=0,o;return s;function s(e){let t=r.events.length-1;for(;t>-1;){let e=r.events[t][1].type;if(e===`lineEnding`||e===`linePrefix`)t--;else break}let i=t>-1?r.events[t][1].type:null,a=i===`tableHead`||i===`tableRow`?S:c;return a===S&&r.parser.lazy[r.now().line]?n(e):a(e)}function c(t){return e.enter(`tableHead`),e.enter(`tableRow`),l(t)}function l(e){return e===124?u(e):(o=!0,a+=1,u(e))}function u(t){return t===null?n(t):y7(t)?a>1?(a=0,r.interrupt=!0,e.exit(`tableRow`),e.enter(`lineEnding`),e.consume(t),e.exit(`lineEnding`),p):n(t):x7(t)?w7(e,u,`whitespace`)(t):(a+=1,o&&(o=!1,i+=1),t===124?(e.enter(`tableCellDivider`),e.consume(t),e.exit(`tableCellDivider`),o=!0,u):(e.enter(`data`),d(t)))}function d(t){return t===null||t===124||b7(t)?(e.exit(`data`),u(t)):(e.consume(t),t===92?f:d)}function f(t){return t===92||t===124?(e.consume(t),d):d(t)}function p(t){return r.interrupt=!1,r.parser.lazy[r.now().line]?n(t):(e.enter(`tableDelimiterRow`),o=!1,x7(t)?w7(e,m,`linePrefix`,r.parser.constructs.disable.null.includes(`codeIndented`)?void 0:4)(t):m(t))}function m(t){return t===45||t===58?g(t):t===124?(o=!0,e.enter(`tableCellDivider`),e.consume(t),e.exit(`tableCellDivider`),h):x(t)}function h(t){return x7(t)?w7(e,g,`whitespace`)(t):g(t)}function g(t){return t===58?(a+=1,o=!0,e.enter(`tableDelimiterMarker`),e.consume(t),e.exit(`tableDelimiterMarker`),_):t===45?(a+=1,_(t)):t===null||y7(t)?b(t):x(t)}function _(t){return t===45?(e.enter(`tableDelimiterFiller`),v(t)):x(t)}function v(t){return t===45?(e.consume(t),v):t===58?(o=!0,e.exit(`tableDelimiterFiller`),e.enter(`tableDelimiterMarker`),e.consume(t),e.exit(`tableDelimiterMarker`),y):(e.exit(`tableDelimiterFiller`),y(t))}function y(t){return x7(t)?w7(e,b,`whitespace`)(t):b(t)}function b(n){return n===124?m(n):n===null||y7(n)?!o||i!==a?x(n):(e.exit(`tableDelimiterRow`),e.exit(`tableHead`),t(n)):x(n)}function x(e){return n(e)}function S(t){return e.enter(`tableRow`),C(t)}function C(n){return n===124?(e.enter(`tableCellDivider`),e.consume(n),e.exit(`tableCellDivider`),C):n===null||y7(n)?(e.exit(`tableRow`),t(n)):x7(n)?w7(e,C,`whitespace`)(n):(e.enter(`data`),w(n))}function w(t){return t===null||t===124||b7(t)?(e.exit(`data`),C(t)):(e.consume(t),t===92?T:w)}function T(t){return t===92||t===124?(e.consume(t),w):w(t)}}function t$e(e,t){let n=-1,r=!0,i=0,a=[0,0,0,0],o=[0,0,0,0],s=!1,c=0,l,u,d,f=new XQe;for(;++n<e.length;){let p=e[n],m=p[1];p[0]===`enter`?m.type===`tableHead`?(s=!1,c!==0&&(n$e(f,t,c,l,u),u=void 0,c=0),l={type:`table`,start:Object.assign({},m.start),end:Object.assign({},m.end)},f.add(n,0,[[`enter`,l,t]])):m.type===`tableRow`||m.type===`tableDelimiterRow`?(r=!0,d=void 0,a=[0,0,0,0],o=[0,n+1,0,0],s&&(s=!1,u={type:`tableBody`,start:Object.assign({},m.start),end:Object.assign({},m.end)},f.add(n,0,[[`enter`,u,t]])),i=m.type===`tableDelimiterRow`?2:u?3:1):i&&(m.type===`data`||m.type===`tableDelimiterMarker`||m.type===`tableDelimiterFiller`)?(r=!1,o[2]===0&&(a[1]!==0&&(o[0]=o[1],d=r9(f,t,a,i,void 0,d),a=[0,0,0,0]),o[2]=n)):m.type===`tableCellDivider`&&(r?r=!1:(a[1]!==0&&(o[0]=o[1],d=r9(f,t,a,i,void 0,d)),a=o,o=[a[1],n,0,0])):m.type===`tableHead`?(s=!0,c=n):m.type===`tableRow`||m.type===`tableDelimiterRow`?(c=n,a[1]===0?o[1]!==0&&(d=r9(f,t,o,i,n,d)):(o[0]=o[1],d=r9(f,t,a,i,n,d)),i=0):i&&(m.type===`data`||m.type===`tableDelimiterMarker`||m.type===`tableDelimiterFiller`)&&(o[3]=n)}for(c!==0&&n$e(f,t,c,l,u),f.consume(t.events),n=-1;++n<t.events.length;){let e=t.events[n];e[0]===`enter`&&e[1].type===`table`&&(e[1]._align=QQe(t.events,n))}return e}function r9(e,t,n,r,i,a){let o=r===1?`tableHeader`:r===2?`tableDelimiter`:`tableData`;n[0]!==0&&(a.end=Object.assign({},i9(t.events,n[0])),e.add(n[0],0,[[`exit`,a,t]]));let s=i9(t.events,n[1]);if(a={type:o,start:Object.assign({},s),end:Object.assign({},s)},e.add(n[1],0,[[`enter`,a,t]]),n[2]!==0){let i=i9(t.events,n[2]),a=i9(t.events,n[3]),o={type:`tableContent`,start:Object.assign({},i),end:Object.assign({},a)};if(e.add(n[2],0,[[`enter`,o,t]]),r!==2){let r=t.events[n[2]],i=t.events[n[3]];if(r[1].end=Object.assign({},i[1].end),r[1].type=`chunkText`,r[1].contentType=`text`,n[3]>n[2]+1){let t=n[2]+1,r=n[3]-n[2]-1;e.add(t,r,[])}}e.add(n[3]+1,0,[[`exit`,o,t]])}return i!==void 0&&(a.end=Object.assign({},i9(t.events,i)),e.add(i,0,[[`exit`,a,t]]),a=void 0),a}function n$e(e,t,n,r,i){let a=[],o=i9(t.events,n);i&&(i.end=Object.assign({},o),a.push([`exit`,i,t])),r.end=Object.assign({},o),a.push([`exit`,r,t]),e.add(n+1,0,a)}function i9(e,t){let n=e[t],r=n[0]===`enter`?`start`:`end`;return n[1][r]}var r$e={name:`tasklistCheck`,tokenize:a$e};function i$e(){return{text:{91:r$e}}}function a$e(e,t,n){let r=this;return i;function i(t){return r.previous!==null||!r._gfmTasklistFirstContentOfListItem?n(t):(e.enter(`taskListCheck`),e.enter(`taskListCheckMarker`),e.consume(t),e.exit(`taskListCheckMarker`),a)}function a(t){return b7(t)?(e.enter(`taskListCheckValueUnchecked`),e.consume(t),e.exit(`taskListCheckValueUnchecked`),o):t===88||t===120?(e.enter(`taskListCheckValueChecked`),e.consume(t),e.exit(`taskListCheckValueChecked`),o):n(t)}function o(t){return t===93?(e.enter(`taskListCheckMarker`),e.consume(t),e.exit(`taskListCheckMarker`),e.exit(`taskListCheck`),s):n(t)}function s(r){return y7(r)?t(r):x7(r)?e.check({tokenize:o$e},t,n)(r):n(r)}}function o$e(e,t,n){return w7(e,r,`whitespace`);function r(e){return e===null?n(e):t(e)}}function s$e(){let e=this.data(),t=e.micromarkExtensions||=[],n=e.fromMarkdownExtensions||=[];t.push(VQe(),YQe(),$Qe(),i$e()),n.push(wQe(),TQe(),AQe(),LQe())}var c$e=`fileManager.readmeCollapsed`;function l$e({folderId:e}){let{t}=U(),[n,r]=(0,y.useState)(()=>localStorage.getItem(c$e)===`1`);(0,y.useEffect)(()=>{localStorage.setItem(c$e,n?`1`:`0`)},[n]);let{data:i,isLoading:a,error:o}=K({queryKey:[`folder-readme`,e],queryFn:()=>Z.getLibraryFolderReadme(e),retry:!1,staleTime:3e4});return a||o||!i?null:n?(0,G.jsxs)(`div`,{className:`mb-2 lg:mb-0 order-first lg:order-none lg:w-10 lg:flex-shrink-0 lg:h-full`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>r(!1),title:t(`fileManager.readme.show`),"aria-label":t(`fileManager.readme.show`),className:`flex lg:hidden w-full items-center gap-2 px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg hover:bg-bambu-dark/40 transition-colors`,children:[(0,G.jsx)(dc,{className:`w-4 h-4 text-bambu-green flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm font-medium text-white truncate`,children:i.filename}),(0,G.jsx)(Tl,{className:`w-4 h-4 text-bambu-gray flex-shrink-0 ml-auto`})]}),(0,G.jsxs)(`button`,{type:`button`,onClick:()=>r(!1),title:t(`fileManager.readme.show`),"aria-label":t(`fileManager.readme.show`),className:`hidden lg:flex h-full w-10 flex-col items-center gap-2 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg hover:bg-bambu-dark/40 transition-colors`,children:[(0,G.jsx)(Tl,{className:`w-4 h-4 text-bambu-green flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-xs font-medium text-bambu-gray [writing-mode:vertical-rl] rotate-180 select-none`,children:t(`fileManager.readme.label`)})]})]}):(0,G.jsxs)(`div`,{className:`mb-4 lg:mb-0 order-first lg:order-none lg:w-80 xl:w-96 lg:flex-shrink-0 lg:h-full flex flex-col bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg overflow-hidden`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2 px-3 py-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 min-w-0`,children:[(0,G.jsx)(dc,{className:`w-4 h-4 text-bambu-green flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm font-medium text-white truncate`,title:i.filename,children:i.filename}),i.truncated&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400 flex-shrink-0`,children:t(`fileManager.readme.truncated`)})]}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>r(!0),title:t(`fileManager.readme.hide`),"aria-label":t(`fileManager.readme.hide`),className:`p-1 rounded text-bambu-gray hover:text-white hover:bg-bambu-dark/40 transition-colors flex-shrink-0`,children:(0,G.jsx)(wl,{className:`w-4 h-4`})})]}),(0,G.jsx)(`div`,{className:`px-4 py-3 border-t border-bambu-dark-tertiary flex-1 overflow-y-auto max-h-96 lg:max-h-none text-sm text-bambu-gray-light leading-relaxed space-y-2`,children:(0,G.jsx)(lQe,{remarkPlugins:[s$e],components:{h1:({children:e})=>(0,G.jsx)(`h1`,{className:`text-lg font-semibold text-white mt-2 mb-1`,children:e}),h2:({children:e})=>(0,G.jsx)(`h2`,{className:`text-base font-semibold text-white mt-2 mb-1`,children:e}),h3:({children:e})=>(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-white mt-2 mb-1`,children:e}),p:({children:e})=>(0,G.jsx)(`p`,{className:`my-1`,children:e}),ul:({children:e})=>(0,G.jsx)(`ul`,{className:`list-disc list-inside space-y-0.5 ml-2`,children:e}),ol:({children:e})=>(0,G.jsx)(`ol`,{className:`list-decimal list-inside space-y-0.5 ml-2`,children:e}),li:({children:e})=>(0,G.jsx)(`li`,{children:e}),code:({children:e,...t})=>t.className?(0,G.jsx)(`code`,{className:`block p-2 bg-bambu-dark rounded text-xs font-mono text-bambu-gray-light overflow-x-auto`,children:e}):(0,G.jsx)(`code`,{className:`px-1 py-0.5 bg-bambu-dark rounded text-xs font-mono text-bambu-green`,children:e}),pre:({children:e})=>(0,G.jsx)(`pre`,{className:`my-2`,children:e}),blockquote:({children:e})=>(0,G.jsx)(`blockquote`,{className:`border-l-2 border-bambu-dark-tertiary pl-3 text-bambu-gray italic`,children:e}),a:({children:e,href:t})=>(0,G.jsx)(`a`,{href:t,target:`_blank`,rel:`noopener noreferrer`,className:`text-bambu-green hover:underline`,children:e}),table:({children:e})=>(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsx)(`table`,{className:`min-w-full text-xs border-collapse`,children:e})}),th:({children:e})=>(0,G.jsx)(`th`,{className:`border border-bambu-dark-tertiary px-2 py-1 text-left font-semibold text-white`,children:e}),td:({children:e})=>(0,G.jsx)(`td`,{className:`border border-bambu-dark-tertiary px-2 py-1`,children:e}),hr:()=>(0,G.jsx)(`hr`,{className:`border-bambu-dark-tertiary my-2`})},children:i.content})})]})}function u$e({open:e,onClose:t,onPickTag:n}){let{t:r}=U(),i=co(),{showToast:a}=Gd(),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(null),[u,d]=(0,y.useState)(``),[f,p]=(0,y.useState)(null),{data:m=[],isLoading:h}=K({queryKey:z5,queryFn:Z.getLibraryTags,enabled:e}),g=()=>{i.invalidateQueries({queryKey:z5}),i.invalidateQueries({queryKey:[`library-files`]})},_=q({mutationFn:async()=>{let e=u.trim();if(!e)throw Error(r(`fileManager.tags.nameRequired`));return c?Z.updateLibraryTag(c.id,e):Z.createLibraryTag(e)},onSuccess:()=>{a(r(c?`fileManager.tags.updated`:`fileManager.tags.created`),`success`),s(!1),l(null),d(``),g()},onError:e=>{a(e.message||r(`fileManager.tags.saveFailed`),`error`)}}),v=q({mutationFn:e=>Z.deleteLibraryTag(e),onSuccess:()=>{a(r(`fileManager.tags.deleted`),`success`),p(null),g()},onError:e=>{a(e.message||r(`fileManager.tags.deleteFailed`),`error`)}}),b=()=>{l(null),d(``),s(!0)},x=e=>{l(e),d(e.name),s(!0)},S=(0,y.useCallback)(()=>{_.isPending||(s(!1),l(null),d(``))},[_.isPending]);(0,y.useEffect)(()=>{if(!e)return;let n=e=>{e.key===`Escape`&&(_.isPending||v.isPending||(o?S():f||t()))};return document.addEventListener(`keydown`,n),()=>document.removeEventListener(`keydown`,n)},[e,o,f,_.isPending,v.isPending,S,t]);let C=e=>{e.preventDefault(),_.mutate()};if(!e)return null;let w=`library-tags-modal-title`,T=`library-tag-editor-title`;return(0,G.jsxs)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60`,onClick:()=>{_.isPending||v.isPending||t()}}),(0,G.jsxs)(`div`,{className:`relative w-full max-w-4xl mx-4 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-2xl max-h-[90vh] flex flex-col`,role:`dialog`,"aria-modal":`true`,"aria-labelledby":w,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-4 px-6 py-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsxs)(`h2`,{id:w,className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Tu,{className:`w-5 h-5 text-bambu-green`}),r(`fileManager.tags.title`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm mt-0.5`,children:r(`fileManager.tags.subtitle`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(Q,{onClick:b,children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),r(`fileManager.tags.add`)]}),(0,G.jsx)(`button`,{type:`button`,className:`p-1.5 text-bambu-gray hover:text-white rounded`,onClick:t,"aria-label":r(`common.close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})})]})]}),(0,G.jsx)(`div`,{className:`overflow-y-auto`,children:h?(0,G.jsxs)(`div`,{className:`flex items-center justify-center py-16 text-bambu-gray`,children:[(0,G.jsx)(Y,{className:`w-6 h-6 animate-spin mr-2`}),r(`common.loading`)]}):m.length===0?(0,G.jsx)(`div`,{className:`py-16 text-center text-bambu-gray`,children:r(`fileManager.tags.empty`)}):(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary text-left text-bambu-gray`,children:[(0,G.jsx)(`th`,{className:`px-4 py-3 font-medium`,children:r(`fileManager.tags.name`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 font-medium text-right`,children:r(`fileManager.tags.fileCount`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 font-medium text-right w-32`,children:r(`common.actions`)})]})}),(0,G.jsx)(`tbody`,{children:m.map(e=>(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/60 hover:bg-bambu-dark-tertiary/30 ${n?`cursor-pointer`:``}`,onClick:()=>{n&&(n(e.id),t())},children:[(0,G.jsx)(`td`,{className:`px-4 py-3 text-white font-medium`,children:e.name}),(0,G.jsx)(`td`,{className:`px-4 py-3 text-right text-bambu-gray`,children:e.file_count}),(0,G.jsx)(`td`,{className:`px-4 py-3 text-right`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-1`,children:[(0,G.jsx)(`button`,{type:`button`,className:`p-1.5 text-bambu-gray hover:text-bambu-green rounded`,onClick:()=>x(e),title:r(`common.edit`),"aria-label":r(`fileManager.tags.editAria`,{name:e.name}),children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{type:`button`,className:`p-1.5 text-bambu-gray hover:text-red-600 dark:hover:text-red-400 rounded`,onClick:()=>p(e),title:r(`common.delete`),"aria-label":r(`fileManager.tags.deleteAria`,{name:e.name}),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})})]},e.id))})]})})]}),o&&(0,G.jsxs)(`div`,{className:`fixed inset-0 z-[60] flex items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60`,onClick:S}),(0,G.jsxs)(`div`,{className:`relative w-full max-w-md mx-4 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl p-6 shadow-2xl`,role:`dialog`,"aria-modal":`true`,"aria-labelledby":T,children:[(0,G.jsx)(`h3`,{id:T,className:`text-lg font-semibold text-white mb-4`,children:r(c?`fileManager.tags.edit`:`fileManager.tags.add`)}),(0,G.jsxs)(`form`,{onSubmit:C,children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,htmlFor:`library-tag-name`,children:r(`fileManager.tags.name`)}),(0,G.jsx)(`input`,{id:`library-tag-name`,type:`text`,maxLength:64,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green mb-4`,placeholder:r(`fileManager.tags.createPlaceholder`),value:u,onChange:e=>d(e.target.value),autoFocus:!0}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:S,children:r(`common.cancel`)}),(0,G.jsxs)(Q,{type:`submit`,disabled:_.isPending||!u.trim(),children:[_.isPending&&(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),r(`common.save`)]})]})]})]})]}),f&&(0,G.jsx)(rf,{title:r(`fileManager.tags.confirmDelete`,{name:f.name}),message:f.file_count>0?r(`fileManager.tags.confirmDeleteInUseMessage`,{count:f.file_count}):r(`fileManager.tags.confirmDeleteMessage`),confirmText:r(`common.delete`),variant:`danger`,isLoading:v.isPending,onConfirm:()=>v.mutate(f.id),onCancel:()=>p(null)})]})}var d$e=90;function f$e({onClose:e}){let{t}=U(),n=co(),{showToast:r}=Gd(),[i,a]=(0,y.useState)(d$e),[o,s]=(0,y.useState)(!0),[c,l]=(0,y.useState)(i);(0,y.useEffect)(()=>{let e=window.setTimeout(()=>l(i),300);return()=>window.clearTimeout(e)},[i]);let u=K({queryKey:[`library-purge-preview`,c,o],queryFn:()=>Z.previewLibraryPurge(c,o),enabled:c>=1}),d=q({mutationFn:()=>Z.executeLibraryPurge(i,o),onSuccess:i=>{r(t(`libraryPurge.toast.success`,{count:i.moved_to_trash}),`success`),n.invalidateQueries({queryKey:[`library-files`]}),n.invalidateQueries({queryKey:[`library-folders`]}),n.invalidateQueries({queryKey:[`library-trash`]}),n.invalidateQueries({queryKey:[`library-trash-count`]}),e()},onError:e=>r(e.message||t(`libraryPurge.toast.failed`),`error`)});(0,y.useEffect)(()=>{let t=t=>{t.key===`Escape`&&!d.isPending&&e()};return window.addEventListener(`keydown`,t),()=>window.removeEventListener(`keydown`,t)},[e,d.isPending]);let f=u.data,p=f?.count??0,m=f?.total_bytes??0,h=p>0&&!d.isPending;return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-white dark:bg-gray-900 rounded-lg shadow-xl max-w-lg w-full`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-gray-200 dark:border-gray-700`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-gray-900 dark:text-gray-100 flex items-center gap-2`,children:[(0,G.jsx)(Nu,{className:`w-5 h-5`}),t(`libraryPurge.title`)]}),(0,G.jsx)(`button`,{onClick:e,className:`text-gray-400 hover:text-gray-600 dark:hover:text-gray-200`,"aria-label":t(`common.close`),disabled:d.isPending,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-gray-600 dark:text-gray-400`,children:t(`libraryPurge.description`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`purge-days`,className:`block text-sm font-medium text-gray-700 dark:text-gray-300 mb-1`,children:t(`libraryPurge.ageLabel`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`input`,{id:`purge-days`,type:`number`,min:1,max:3650,value:i,onChange:e=>a(Math.max(1,Math.min(3650,parseInt(e.target.value||`0`,10)||0))),className:`w-24 rounded border border-gray-300 dark:border-gray-600 bg-white dark:bg-gray-800 text-sm px-2 py-1 text-gray-900 dark:text-gray-100`}),(0,G.jsx)(`span`,{className:`text-sm text-gray-600 dark:text-gray-400`,children:t(`libraryPurge.days`)})]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 text-sm text-gray-700 dark:text-gray-300`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:o,onChange:e=>s(e.target.checked),className:`rounded border-gray-300`}),t(`libraryPurge.includeNeverPrinted`)]}),(0,G.jsxs)(`div`,{className:`rounded border border-gray-200 dark:border-gray-700 bg-gray-50 dark:bg-gray-800/30 p-3`,children:[(0,G.jsx)(`div`,{className:`text-xs font-semibold uppercase tracking-wide text-gray-600 dark:text-gray-300 mb-2`,children:t(`libraryPurge.effectsTitle`)}),(0,G.jsxs)(`ul`,{className:`text-xs text-gray-700 dark:text-gray-300 space-y-1 list-disc pl-4`,children:[(0,G.jsx)(`li`,{children:t(`libraryPurge.effect1`)}),(0,G.jsx)(`li`,{children:t(`libraryPurge.effect2`)}),(0,G.jsx)(`li`,{children:t(`libraryPurge.effect3`)}),(0,G.jsx)(`li`,{children:t(`libraryPurge.effect4`)})]})]}),(0,G.jsx)(`div`,{className:`rounded border border-gray-200 dark:border-gray-700 bg-gray-50 dark:bg-gray-800/50 p-3`,children:u.isLoading||u.isFetching?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm text-gray-500 dark:text-gray-400`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),` `,t(`libraryPurge.previewLoading`)]}):u.isError?(0,G.jsx)(`div`,{className:`text-sm text-red-600 dark:text-red-400`,children:u.error?.message??t(`libraryPurge.previewFailed`)}):(0,G.jsxs)(`div`,{className:`text-sm text-gray-900 dark:text-gray-100`,children:[(0,G.jsx)(`div`,{className:`font-medium`,children:t(`libraryPurge.previewSummary`,{count:p,size:Ud(m)})}),f?.sample_filenames&&f.sample_filenames.length>0&&(0,G.jsxs)(`ul`,{className:`mt-2 text-xs text-gray-600 dark:text-gray-400 space-y-0.5 list-disc pl-4`,children:[f.sample_filenames.map(e=>(0,G.jsx)(`li`,{className:`truncate`,children:e},e)),p>f.sample_filenames.length&&(0,G.jsx)(`li`,{className:`list-none italic text-gray-500`,children:t(`libraryPurge.andMore`,{count:p-f.sample_filenames.length})})]})]})}),(0,G.jsxs)(`div`,{className:`flex gap-2 items-start text-xs text-amber-700 dark:text-amber-400 bg-amber-50 dark:bg-amber-900/20 rounded px-3 py-2`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 mt-0.5 shrink-0`}),(0,G.jsx)(`span`,{children:t(`libraryPurge.warning`)})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 p-4 border-t border-gray-200 dark:border-gray-700`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:e,disabled:d.isPending,children:t(`common.cancel`)}),(0,G.jsx)(Q,{variant:`danger`,disabled:!h,onClick:()=>d.mutate(),children:d.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin mr-1`}),t(`libraryPurge.purging`)]}):t(`libraryPurge.confirmCta`,{count:p})})]})]})})}function p$e({parentId:e,onClose:t,onSave:n,isLoading:r,t:i}){let[a,o]=(0,y.useState)(``);return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg w-full max-w-sm border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary`,children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:i(`fileManager.newFolder`)})}),(0,G.jsxs)(`form`,{onSubmit:t=>{t.preventDefault(),n({name:a.trim(),parent_id:e})},className:`p-4 space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:i(`fileManager.folderName`)}),(0,G.jsx)(`input`,{type:`text`,value:a,onChange:e=>o(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:i(`fileManager.folderNamePlaceholder`),autoFocus:!0,required:!0})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 pt-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:t,children:i(`common.cancel`)}),(0,G.jsx)(Q,{type:`submit`,disabled:!a.trim()||r,children:r?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):i(`common.create`)})]})]})]})})}function m$e({onClose:e,onSave:t,isLoading:n,t:r}){let[i,a]=(0,y.useState)(``),[o,s]=(0,y.useState)(``),[c,l]=(0,y.useState)(!0),[u,d]=(0,y.useState)(!1);return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg w-full max-w-md border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(yc,{className:`w-5 h-5 text-bambu-green`}),r(`fileManager.linkExternalFolder`)]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:r(`fileManager.linkExternalFolderDescription`)})]}),(0,G.jsxs)(`form`,{onSubmit:e=>{e.preventDefault(),t({name:i.trim(),external_path:o.trim(),readonly:c,show_hidden:u})},className:`p-4 space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:r(`fileManager.folderName`)}),(0,G.jsx)(`input`,{type:`text`,value:i,onChange:e=>a(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`,placeholder:r(`fileManager.externalFolderNamePlaceholder`),autoFocus:!0,required:!0})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:r(`fileManager.externalPath`)}),(0,G.jsx)(`input`,{type:`text`,value:o,onChange:e=>s(e.target.value),className:`w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-3 py-2 text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green font-mono text-sm`,placeholder:`/mnt/nas/3d-prints`,required:!0}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:r(`fileManager.externalPathHelp`)})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`label`,{className:`flex items-center gap-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:c,onChange:e=>l(e.target.checked),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:r(`fileManager.readOnly`)}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[`(`,r(`fileManager.readOnlyHelp`),`)`]})]}),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:u,onChange:e=>d(e.target.checked),className:`rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:r(`fileManager.showHiddenFiles`)})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 pt-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:e,children:r(`common.cancel`)}),(0,G.jsx)(Q,{type:`submit`,disabled:!i.trim()||!o.trim()||n,children:n?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):r(`fileManager.linkFolder`)})]})]})]})})}var h$e=`<>:"/\\|?*`;function g$e(e){for(let t of e)if(h$e.includes(t)||t.charCodeAt(0)<32)return t;return null}function _$e({type:e,currentName:t,onClose:n,onSave:r,isLoading:i,t:a}){let o=e===`file`?t.match(/(\.gcode\.3mf|\.3mf|\.gcode)$/i)?.[1]??``:``,s=e===`file`&&o?t.slice(0,-o.length):t,[c,l]=(0,y.useState)(s),u=e===`file`?g$e(c):null,d=u?a(`fileManager.invalidFilenameChar`,{char:u}):null;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg w-full max-w-sm border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary`,children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:a(e===`file`?`fileManager.renameFile`:`fileManager.renameFolder`)})}),(0,G.jsxs)(`form`,{onSubmit:n=>{if(n.preventDefault(),d)return;let i=e===`file`?c.trim()+o:c.trim();c.trim()&&i!==t&&r(i)},className:`p-4 space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-1`,children:a(`common.name`)}),(0,G.jsxs)(`div`,{className:`flex items-center bg-bambu-dark border rounded focus-within:border-bambu-green ${d?`border-red-500`:`border-bambu-dark-tertiary`}`,children:[(0,G.jsx)(`input`,{type:`text`,value:c,onChange:e=>l(e.target.value),className:`flex-1 bg-transparent px-3 py-2 text-white placeholder-bambu-gray focus:outline-none min-w-0`,autoFocus:!0,required:!0}),o&&(0,G.jsx)(`span`,{className:`pr-3 text-bambu-gray text-sm select-none whitespace-nowrap`,children:o})]}),d&&(0,G.jsx)(`p`,{className:`mt-1 text-xs text-red-700 dark:text-red-400`,children:d})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 pt-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:n,children:a(`common.cancel`)}),(0,G.jsx)(Q,{type:`submit`,disabled:!c.trim()||c.trim()===s||!!d||i,children:i?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):a(`common.rename`)})]})]})]})})}function v$e({folders:e,selectedFiles:t,currentFolderId:n,onClose:r,onMove:i,isLoading:a,t:o}){let[s,c]=(0,y.useState)(null),l=(e,t=0)=>{let n=[];for(let r of e)n.push({id:r.id,name:r.name,depth:t}),r.children.length>0&&n.push(...l(r.children,t+1));return n},u=[{id:null,name:o(`fileManager.rootNoFolder`),depth:0},...l(e)];return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg w-full max-w-sm border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary`,children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:o(`fileManager.moveFiles`,{count:t.length})})}),(0,G.jsxs)(`div`,{className:`p-4 space-y-4`,children:[(0,G.jsx)(`div`,{className:`max-h-64 overflow-y-auto space-y-1`,children:u.map(e=>(0,G.jsxs)(`button`,{onClick:()=>c(e.id),disabled:e.id===n,className:`w-full text-left px-3 py-2 rounded transition-colors flex items-center gap-2 ${s===e.id?`bg-bambu-green/20 text-bambu-green`:e.id===n?`opacity-50 cursor-not-allowed text-bambu-gray`:`hover:bg-bambu-dark text-white`}`,style:{paddingLeft:`${12+e.depth*16}px`},children:[(0,G.jsx)(_c,{className:`w-4 h-4`}),e.name,e.id===n&&(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray ml-auto`,children:[`(`,o(`fileManager.current`),`)`]})]},e.id??`root`))}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 pt-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,onClick:r,children:o(`common.cancel`)}),(0,G.jsx)(Q,{onClick:()=>i(s),disabled:a,children:a?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):o(`common.move`)})]})]})]})})}function y$e({folder:e,onClose:t,onLink:n,isLoading:r,t:i}){let[a,o]=(0,y.useState)(`project`),[s,c]=(0,y.useState)(e.project_id||e.archive_id||null);(0,y.useState)(()=>{e.archive_id&&o(`archive`)});let{data:l}=K({queryKey:[`projects`],queryFn:()=>Z.getProjects(),select:t=>nK([...t].sort((e,t)=>e.name.localeCompare(t.name)),e.project_id)}),{data:u}=K({queryKey:[`archives-for-link`],queryFn:()=>Z.getArchives(void 0,void 0,100)}),d=()=>{n(a===`project`?{project_id:s,archive_id:0}:{project_id:0,archive_id:s})},f=()=>{n({project_id:0,archive_id:0})},p=e.project_id||e.archive_id;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg w-full max-w-md border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary flex items-center justify-between`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-center gap-2`,children:[(0,G.jsx)(Yc,{className:`w-5 h-5 text-bambu-green`}),i(`fileManager.linkFolder`)]}),(0,G.jsx)(`button`,{onClick:t,className:`p-1 hover:bg-bambu-dark rounded`,children:(0,G.jsx)(td,{className:`w-5 h-5 text-bambu-gray`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i(`fileManager.linkFolderDescription`,{name:e.name})}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(`button`,{onClick:()=>{o(`project`),c(null)},className:`flex-1 flex items-center justify-center gap-2 px-3 py-2 rounded-lg border transition-colors ${a===`project`?`border-bambu-green bg-bambu-green/10 text-bambu-green`:`border-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(Qo,{className:`w-4 h-4`}),i(`fileManager.project`)]}),(0,G.jsxs)(`button`,{onClick:()=>{o(`archive`),c(null)},className:`flex-1 flex items-center justify-center gap-2 px-3 py-2 rounded-lg border transition-colors ${a===`archive`?`border-bambu-green bg-bambu-green/10 text-bambu-green`:`border-bambu-dark-tertiary text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(Po,{className:`w-4 h-4`}),i(`fileManager.archive`)]})]}),(0,G.jsx)(`div`,{className:`max-h-64 overflow-y-auto space-y-1 bg-bambu-dark rounded-lg p-2`,children:a===`project`?l&&l.length>0?l.map(e=>(0,G.jsxs)(`button`,{onClick:()=>c(e.id),className:`w-full text-left px-3 py-2 rounded transition-colors flex items-center gap-2 ${s===e.id?`bg-bambu-green/20 text-bambu-green`:`hover:bg-bambu-dark-tertiary text-white`}`,children:[(0,G.jsx)(`div`,{className:`w-3 h-3 rounded-full flex-shrink-0`,style:{backgroundColor:e.color||`#00ae42`}}),(0,G.jsx)(`span`,{className:`truncate`,children:e.name})]},e.id)):(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray text-center py-4`,children:i(`fileManager.noProjectsFound`)}):u&&u.length>0?u.map(e=>(0,G.jsxs)(`button`,{onClick:()=>c(e.id),className:`w-full text-left px-3 py-2 rounded transition-colors flex items-center gap-2 ${s===e.id?`bg-bambu-green/20 text-bambu-green`:`hover:bg-bambu-dark-tertiary text-white`}`,children:[(0,G.jsx)(oc,{className:`w-4 h-4 text-bambu-gray flex-shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,children:e.print_name||e.filename})]},e.id)):(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray text-center py-4`,children:i(`fileManager.noArchivesFound`)})})]}),(0,G.jsxs)(`div`,{className:`p-4 border-t border-bambu-dark-tertiary flex justify-between`,children:[p&&(0,G.jsxs)(Q,{variant:`danger`,onClick:f,disabled:r,children:[(0,G.jsx)(zu,{className:`w-4 h-4 mr-2`}),i(`fileManager.unlink`)]}),(0,G.jsxs)(`div`,{className:`flex gap-2 ${p?``:`ml-auto`}`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:t,children:i(`common.cancel`)}),(0,G.jsx)(Q,{onClick:d,disabled:!s||r,children:r?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):i(`fileManager.link`)})]})]})]})})}function b$e({folder:e,selectedFolderId:t,onSelect:n,onDelete:r,onLink:i,onRename:a,depth:o=0,wrapNames:s=!1,defaultExpanded:c=!0,showModified:l=!1,hasPermission:u,t:d}){let[f,p]=(0,y.useState)(c),[m,h]=(0,y.useState)(!1),g=e.children.length>0,_=e.project_id||e.archive_id,v=e.is_external,b=u(`library:delete_all`)||u(`library:delete_own`)&&e.file_count===0&&!g&&!v&&!_,x=b?void 0:u(`library:delete_own`)&&!v&&!_?d(`fileManager.onlyEmptyFoldersDeletable`):d(`fileManager.noPermissionDeleteFolder`);return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`group flex items-center gap-1 px-2 py-1.5 rounded cursor-pointer transition-colors ${t===e.id?`bg-bambu-green/20 text-bambu-green`:`hover:bg-bambu-dark text-white`}`,style:{paddingLeft:`${8+o*12}px`},onClick:()=>n(e.id),children:[g?(0,G.jsx)(`button`,{onClick:e=>{e.stopPropagation(),p(!f)},className:`p-0.5 hover:bg-bambu-dark-tertiary rounded`,children:(0,G.jsx)(ms,{className:`w-3.5 h-3.5 transition-transform ${f?`rotate-90`:``}`})}):(0,G.jsx)(`div`,{className:`w-4.5`}),v?(0,G.jsx)(yc,{className:`w-4 h-4 text-purple-600 dark:text-purple-400 flex-shrink-0`}):(0,G.jsx)(_c,{className:`w-4 h-4 text-bambu-green flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`span`,{className:`block text-sm ${s?`break-all`:`truncate`}`,title:e.name,children:e.name}),l&&e.latest_activity_at&&(0,G.jsxs)(`span`,{className:`mt-0.5 flex items-center gap-1 text-xs text-bambu-gray`,title:d(`fileManager.lastActivity`),children:[(0,G.jsx)(rs,{className:`w-3 h-3 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,children:tp(e.latest_activity_at)})]})]}),_&&(0,G.jsxs)(`button`,{onClick:t=>{t.stopPropagation(),i(e)},className:`flex-shrink-0 flex items-center gap-1 text-xs px-1.5 py-0.5 rounded bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400 hover:bg-blue-200 dark:hover:bg-blue-500/30 transition-colors`,title:`${e.project_name?`Project: ${e.project_name}`:`Archive: ${e.archive_name}`} (click to change)`,children:[(0,G.jsx)(Yc,{className:`w-3 h-3`}),e.project_name?(0,G.jsx)(Qo,{className:`w-3 h-3`}):(0,G.jsx)(Po,{className:`w-3 h-3`})]}),v&&e.external_readonly&&(0,G.jsx)(`span`,{title:d(`fileManager.readOnly`),children:(0,G.jsx)(tl,{className:`w-3 h-3 text-amber-600 dark:text-amber-400 flex-shrink-0`})}),e.file_count>0&&(0,G.jsx)(`span`,{className:`flex-shrink-0 text-xs text-bambu-gray`,children:e.file_count}),!_&&!v&&(0,G.jsx)(`button`,{onClick:t=>{t.stopPropagation(),i(e)},className:`flex-shrink-0 p-1 rounded hover:bg-bambu-dark-tertiary`,title:d(`fileManager.linkToProjectOrArchive`),children:(0,G.jsx)(Yc,{className:`w-3.5 h-3.5 text-bambu-gray hover:text-bambu-green`})}),(0,G.jsx)(`div`,{className:`flex-shrink-0 flex items-center gap-0.5 transition-opacity ${s?``:`can-hover:opacity-0 group-hover:opacity-100 group-focus-within:opacity-100`}`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`button`,{onClick:()=>h(!m),className:`p-1 rounded hover:bg-bambu-dark-tertiary`,children:(0,G.jsx)(Qs,{className:`w-3.5 h-3.5 text-bambu-gray`})}),m&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-10`,onClick:()=>h(!1)}),(0,G.jsxs)(`div`,{className:`absolute right-0 top-full mt-1 z-20 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl py-1 min-w-[120px]`,children:[(0,G.jsxs)(`button`,{className:`w-full px-3 py-1.5 text-left text-sm flex items-center gap-2 ${u(`library:update_all`)?`text-white hover:bg-bambu-dark`:`text-bambu-gray cursor-not-allowed`}`,onClick:()=>{u(`library:update_all`)&&(a(e),h(!1))},disabled:!u(`library:update_all`),title:u(`library:update_all`)?void 0:d(`fileManager.noPermissionRenameFolder`),children:[(0,G.jsx)(kl,{className:`w-3.5 h-3.5`}),d(`common.rename`)]}),(0,G.jsxs)(`button`,{className:`w-full px-3 py-1.5 text-left text-sm flex items-center gap-2 ${u(`library:update_all`)?`text-white hover:bg-bambu-dark`:`text-bambu-gray cursor-not-allowed`}`,onClick:()=>{u(`library:update_all`)&&(i(e),h(!1))},disabled:!u(`library:update_all`),title:u(`library:update_all`)?void 0:d(`fileManager.noPermissionLinkFolder`),children:[(0,G.jsx)(Yc,{className:`w-3.5 h-3.5`}),d(_?`fileManager.changeLink`:`fileManager.linkTo`)]}),(0,G.jsxs)(`button`,{className:`w-full px-3 py-1.5 text-left text-sm flex items-center gap-2 ${b?`text-red-700 dark:text-red-400 hover:bg-bambu-dark`:`text-bambu-gray cursor-not-allowed`}`,onClick:()=>{b&&(r(e.id),h(!1))},disabled:!b,title:x,children:[(0,G.jsx)(Nu,{className:`w-3.5 h-3.5`}),d(`common.delete`)]})]})]})]})})]}),g&&f&&(0,G.jsx)(`div`,{children:e.children.map(e=>(0,G.jsx)(b$e,{folder:e,selectedFolderId:t,onSelect:n,onDelete:r,onLink:i,onRename:a,depth:o+1,wrapNames:s,defaultExpanded:c,showModified:l,hasPermission:u,t:d},e.id))})]})}function x$e({file:e,isSelected:t,onSelect:n,onDelete:r,onDownload:i,onPrint:a,onSlice:o,onOpenInSlicer:s,onRunPipeline:c,useSlicerApi:l,desktopSlicer:u,canSlice:d,onPreview3d:f,onRename:p,onGenerateThumbnail:m,onTagClick:h,thumbnailVersion:g,hasPermission:_,canModify:v,authEnabled:b,showModified:x,t:S}){let[C,w]=(0,y.useState)(null),T=_(`library:read`),E=v(`library`,`update`,e.created_by_id),D=v(`library`,`delete`,e.created_by_id),O=[];return a&&F5(e)&&O.push({label:S(`common.print`),icon:(0,G.jsx)(Ll,{className:`w-4 h-4 text-bambu-green`}),onClick:()=>a(e),disabled:!_(`queue:create`),title:_(`queue:create`)?void 0:S(`fileManager.noPermissionAddToQueue`)}),I5(e,!!l,u)&&(l?o:s)&&O.push({label:S(`slice.action`),icon:l?(0,G.jsx)(Rs,{className:`w-4 h-4`}):(0,G.jsx)(nc,{className:`w-4 h-4`}),onClick:()=>{l?o?.(e):s?.(e)},disabled:!d,title:d?void 0:S(l?`fileManager.noPermissionSlice`:`fileManager.noPermissionDownload`)}),c&&l&&I5(e,!0,u)&&O.push({label:S(`library.runWithPipeline.actionLabel`),icon:(0,G.jsx)(Ml,{className:`w-4 h-4`}),onClick:()=>c(e),disabled:!_(`pipelines:run`),title:_(`pipelines:run`)?void 0:S(`library.runWithPipeline.noPermission`)}),f&&(e.file_type===`3mf`||e.file_type===`gcode`||e.file_type===`stl`||e.file_type===`gcode.3mf`)&&O.push({label:S(`fileManager.preview3d`),icon:(0,G.jsx)(Zo,{className:`w-4 h-4`}),onClick:()=>f(e),disabled:!T,title:T?void 0:S(`fileManager.noPermissionPreview`)}),O.push({label:S(`common.download`),icon:(0,G.jsx)(Ys,{className:`w-4 h-4`}),onClick:()=>i(e.id),disabled:!_(`library:read`),title:_(`library:read`)?void 0:S(`fileManager.noPermissionDownload`)}),p&&O.push({label:S(`common.rename`),icon:(0,G.jsx)(kl,{className:`w-4 h-4`}),onClick:()=>p(e),disabled:!E,title:E?void 0:S(`fileManager.noPermissionRenameFile`)}),m&&e.file_type===`stl`&&O.push({label:S(`fileManager.generateThumbnail`),icon:(0,G.jsx)(Vc,{className:`w-4 h-4`}),onClick:()=>m(e),disabled:!E,title:E?void 0:S(`fileManager.noPermissionGenerateThumbnail`)}),O.push({label:S(`common.delete`),icon:(0,G.jsx)(Nu,{className:`w-4 h-4`}),onClick:()=>r(e.id),danger:!0,disabled:!D,title:D?void 0:S(`fileManager.noPermissionDeleteFile`)}),(0,G.jsxs)(`div`,{className:`group relative bg-bambu-dark-secondary rounded-lg border transition-all cursor-pointer ${t?`border-bambu-green ring-1 ring-bambu-green`:`border-bambu-dark-tertiary hover:border-bambu-green/50`}`,onClick:()=>n(e.id),children:[(0,G.jsxs)(`div`,{className:`aspect-square bg-bambu-dark flex items-center justify-center overflow-hidden rounded-t-lg`,children:[e.thumbnail_path?(0,G.jsx)(`img`,{src:`${Z.getLibraryFileThumbnailUrl(e.id)}${g?(Z.getLibraryFileThumbnailUrl(e.id).includes(`?`)?`&`:`?`)+`v=${g}`:``}`,alt:e.filename,className:`w-full h-full object-cover`}):(0,G.jsx)(oc,{className:`w-12 h-12 text-bambu-gray/30`}),(0,G.jsx)(`div`,{className:`absolute top-2 right-2 text-xs px-1.5 py-0.5 rounded font-medium ${e.file_type===`3mf`?`bg-bambu-green/90 text-white`:e.file_type===`gcode`||e.file_type===`gcode.3mf`?`bg-blue-500/90 text-white`:e.file_type===`stl`?`bg-purple-500/90 text-white`:`bg-bambu-gray/90 text-white`}`,children:e.file_type.toUpperCase()})]}),(0,G.jsxs)(`div`,{className:`p-3`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-medium text-white truncate`,title:e.print_name||e.filename,children:e.print_name||e.filename}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mt-1 text-xs text-bambu-gray`,children:[(0,G.jsx)(`span`,{children:Ud(e.file_size)}),e.print_time_seconds&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(js,{className:`w-3 h-3`}),op(e.print_time_seconds)]})]}),e.sliced_for_model&&(0,G.jsxs)(`div`,{className:`mt-1 text-xs text-bambu-gray flex items-center gap-1`,children:[(0,G.jsx)(Ll,{className:`w-3 h-3`}),e.sliced_for_model]}),(e.variant_count??0)>1&&(0,G.jsxs)(`div`,{className:`mt-1 text-xs text-bambu-green flex items-center gap-1`,children:[(0,G.jsx)(qc,{className:`w-3 h-3`}),S(`fileManager.variants.badge`,{count:e.variant_count})]}),e.print_count>0&&(0,G.jsx)(`div`,{className:`mt-1 text-xs text-bambu-green`,children:S(`fileManager.printedCount`,{count:e.print_count})}),b&&e.created_by_username&&(0,G.jsxs)(`div`,{className:`mt-1 text-xs text-bambu-gray flex items-center gap-1`,children:[(0,G.jsx)(Vu,{className:`w-3 h-3`}),e.created_by_username]}),x&&(0,G.jsxs)(`div`,{className:`mt-1 text-xs text-bambu-gray flex items-center gap-1`,title:S(`fileManager.lastModified`),children:[(0,G.jsx)(rs,{className:`w-3 h-3`}),tp(e.fs_modified_at??e.created_at)]}),(e.tags?.length??0)>0&&(0,G.jsx)(`div`,{className:`mt-2 flex flex-wrap gap-1`,onClick:e=>e.stopPropagation(),children:e.tags.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>h?.(e.id),className:`inline-flex items-center gap-0.5 px-1.5 py-0.5 rounded-full text-[10px] bg-bambu-green/10 text-bambu-green hover:bg-bambu-green/20 transition-colors max-w-full`,title:e.name,children:[(0,G.jsx)(Tu,{className:`w-2.5 h-2.5 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,children:e.name})]},e.id))})]}),(0,G.jsxs)(`div`,{className:`absolute bottom-2 right-2 transition-opacity can-hover:opacity-0 group-hover:opacity-100 group-focus-within:opacity-100`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(`button`,{onClick:e=>{let t=e.currentTarget.getBoundingClientRect();w({x:t.left,y:t.bottom+4})},className:`p-1.5 rounded bg-bambu-dark-secondary/90 hover:bg-bambu-dark-tertiary`,children:(0,G.jsx)(Qs,{className:`w-4 h-4 text-bambu-gray`})}),C&&(0,G.jsx)(FT,{x:C.x,y:C.y,items:O,onClose:()=>w(null)})]}),(0,G.jsx)(`div`,{className:`absolute top-2 left-2 w-5 h-5 rounded border-2 flex items-center justify-center transition-all ${t?`bg-bambu-green border-bambu-green`:`border-white/30 bg-black/30 can-hover:opacity-0 group-hover:opacity-100 group-focus-within:opacity-100`}`,children:t&&(0,G.jsx)(`div`,{className:`w-2 h-2 bg-white rounded-sm`})})]})}function S$e(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),{hasPermission:r,hasAnyPermission:i,canModify:a,authEnabled:o}=jd(),[s]=Ri(),c=or(),l=s.get(`folder`),[u,d]=(0,y.useState)(l?parseInt(l,10):null),[f,p]=(0,y.useState)(`internal`),[m,h]=(0,y.useState)([]),[g,_]=(0,y.useState)(!1),[v,b]=(0,y.useState)(!1),[x,S]=(0,y.useState)(!1),[C,w]=(0,y.useState)(!1),[T,E]=(0,y.useState)([]),[D,O]=(0,y.useState)(!1),[k,A]=(0,y.useState)(!1),[j,M]=(0,y.useState)(!1),[N,P]=(0,y.useState)([]),[F,I]=(0,y.useState)(null),[L,R]=(0,y.useState)(null),[z,B]=(0,y.useState)(null),[V,ee]=(0,y.useState)(null),[te,ne]=(0,y.useState)(null),[re,ie]=(0,y.useState)(null),[ae,oe]=(0,y.useState)({}),[se,H]=(0,y.useState)(null),[ce,le]=(0,y.useState)(()=>localStorage.getItem(`library-view-mode`)||`grid`),[ue,de]=(0,y.useState)(()=>localStorage.getItem(`library-wrap-folders`)===`true`),[fe,pe]=(0,y.useState)(()=>localStorage.getItem(`library-collapse-folders`)===`true`),[me,he]=(0,y.useState)(()=>localStorage.getItem(`library-folder-sort-field`)===`activity`?`activity`:`name`),[ge,_e]=(0,y.useState)(()=>localStorage.getItem(`library-folder-sort-direction`)===`desc`?`desc`:`asc`),[ve,ye]=(0,y.useState)(()=>{let e=localStorage.getItem(`library-sidebar-width`);return e?parseInt(e,10):256}),[be,xe]=(0,y.useState)(!1),Se=(0,y.useRef)(null);(0,y.useEffect)(()=>{if(!be)return;document.body.style.userSelect=`none`,document.body.style.cursor=`col-resize`;let e=e=>{if(!Se.current)return;let t=Se.current.parentElement?.getBoundingClientRect();if(!t)return;let n=e.clientX-t.left;ye(Math.min(500,Math.max(200,n)))},t=()=>{xe(!1),document.body.style.userSelect=``,document.body.style.cursor=``,localStorage.setItem(`library-sidebar-width`,String(ve))};return document.addEventListener(`mousemove`,e),document.addEventListener(`mouseup`,t),()=>{document.removeEventListener(`mousemove`,e),document.removeEventListener(`mouseup`,t),document.body.style.userSelect=``,document.body.style.cursor=``}},[be,ve]);let[Ce,we]=(0,y.useState)(``),[Te,Ee]=(0,y.useState)(`all`),[De,Oe]=(0,y.useState)(``),[ke,Ae]=(0,y.useState)(()=>localStorage.getItem(`library-sort-field`)||`name`),[je,Me]=(0,y.useState)(()=>localStorage.getItem(`library-sort-direction`)||`asc`),[Ne,Pe]=(0,y.useState)(()=>localStorage.getItem(`library-show-modified`)===`true`);(0,y.useEffect)(()=>{let e=s.get(`folder`);e&&d(parseInt(e,10))},[s]);let{data:Fe}=K({queryKey:[`settings`],queryFn:()=>Z.getSettings()}),Ie=XG(Fe?.open_in_slicer,Fe?.preferred_slicer),Le=(0,y.useCallback)(async t=>{try{let{token:e}=await Z.createLibrarySlicerToken(t.id),n=Z.getLibrarySlicerDownloadUrl(t.id,e,t.filename);eK(`${window.location.origin}${n}`,Ie)}catch{n(e(`fileManager.toast.openInSlicerFailed`),`error`);let r=Z.getLibraryFileDownloadUrl(t.id);eK(`${window.location.origin}${r}`,Ie)}},[Ie,n,e]),Re=(0,y.useCallback)(()=>Fe?.use_slicer_api?r(`library:upload`):i(`library:read_all`,`library:read_own`),[Fe?.use_slicer_api,r,i]),{data:ze,isLoading:Be}=K({queryKey:[`library-folders`],queryFn:()=>Z.getLibraryFolders()}),Ve=(0,y.useMemo)(()=>{if(!ze)return ze;let e=t=>[...t].sort((e,t)=>{let n=0;if(me===`name`)n=e.name.localeCompare(t.name);else{let r=e.latest_activity_at?new Date(e.latest_activity_at).getTime():null,i=t.latest_activity_at?new Date(t.latest_activity_at).getTime():null;if(r===null&&i===null)n=e.name.localeCompare(t.name);else if(r===null)return 1;else if(i===null)return-1;else n=r-i}return ge===`asc`?n:-n}).map(t=>({...t,children:e(t.children)}));return e(ze)},[ze,me,ge]),{data:He}=K({queryKey:[`library-trash-count`],queryFn:async()=>{try{return(await Z.listLibraryTrash(1,0)).total}catch{return 0}},staleTime:3e4}),Ue=u!==null&&Ce.trim().length>0,We=(0,y.useMemo)(()=>[...N].sort((e,t)=>e-t),[N]),{data:Ge=[]}=K({queryKey:[`library-tags`],queryFn:Z.getLibraryTags}),Ke=(0,y.useMemo)(()=>{let e=new Map;for(let t of Ge)e.set(t.id,t.name);return e},[Ge]);(0,y.useEffect)(()=>{Ge.length!==0&&P(e=>{let t=e.filter(e=>Ke.has(e));return t.length===e.length?e:t})},[Ge.length,Ke]);let qe=(0,y.useCallback)(e=>{P(t=>t.includes(e)?t.filter(t=>t!==e):[...t,e])},[]),{data:Je,isLoading:Ye}=K({queryKey:[`library-files`,u,f,Ue,We],queryFn:()=>Z.getLibraryFiles(u,!1,void 0,u===null?f:void 0,Ue,We)}),{data:Xe}=K({queryKey:[`library-stats`],queryFn:()=>Z.getLibraryStats()}),{data:Ze}=K({queryKey:[`users`,`slim`],queryFn:()=>Z.getUsersSlim()}),Qe=(0,y.useMemo)(()=>{if(!Je)return[];let e=new Set(Je.map(e=>e.file_type));return Array.from(e).sort()},[Je]),$e=(0,y.useMemo)(()=>{if(!Je)return[];let e=[...Je];if(Ce.trim()){let t=Ce.toLowerCase();e=e.filter(e=>e.filename.toLowerCase().includes(t)||e.print_name&&e.print_name.toLowerCase().includes(t))}if(Te!==`all`&&(e=e.filter(e=>e.file_type===Te)),De.trim()){let t=De.toLowerCase();e=e.filter(e=>e.created_by_username&&e.created_by_username.toLowerCase().includes(t))}return e.sort((e,t)=>{let n=0;switch(ke){case`name`:n=(e.print_name||e.filename).localeCompare(t.print_name||t.filename);break;case`date`:n=(ep(e.fs_modified_at??e.created_at)?.getTime()??0)-(ep(t.fs_modified_at??t.created_at)?.getTime()??0);break;case`size`:n=e.file_size-t.file_size;break;case`type`:n=e.file_type.localeCompare(t.file_type);break;case`prints`:n=e.print_count-t.print_count;break}return je===`asc`?n:-n}),e},[Je,Ce,Te,De,ke,je]),et=(0,y.useMemo)(()=>{if(!Xe||!Fe)return!1;let e=(Fe.library_disk_warning_gb||5)*1024*1024*1024;return Xe.disk_free_bytes<e},[Xe,Fe]),tt=q({mutationFn:e=>Z.createLibraryFolder(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`library-folders`]}),_(!1),n(e(`fileManager.toast.folderCreated`),`success`)},onError:e=>n(e.message,`error`)}),nt=q({mutationFn:async e=>{let t=await Z.createExternalFolder(e);return await Z.scanExternalFolder(t.id),t},onSuccess:r=>{t.invalidateQueries({queryKey:[`library-folders`]}),t.invalidateQueries({queryKey:[`library-files`]}),t.invalidateQueries({queryKey:[`library-stats`]}),b(!1),d(r.id),n(e(`fileManager.toast.externalFolderLinked`),`success`)},onError:e=>n(e.message,`error`)}),rt=q({mutationFn:e=>Z.scanExternalFolder(e),onSuccess:r=>{t.invalidateQueries({queryKey:[`library-files`]}),t.invalidateQueries({queryKey:[`library-folders`]}),t.invalidateQueries({queryKey:[`library-stats`]}),n(e(`fileManager.toast.folderScanned`,{added:r.added,removed:r.removed}),`success`)},onError:e=>n(e.message,`error`)}),it=q({mutationFn:e=>Z.deleteLibraryFolder(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`library-folders`]}),t.invalidateQueries({queryKey:[`library-files`]}),t.invalidateQueries({queryKey:[`library-stats`]}),u===L?.id&&d(null),R(null),n(e(`fileManager.toast.folderDeleted`),`success`)},onError:e=>{R(null),n(e.message,`error`)}}),at=q({mutationFn:e=>Z.deleteLibraryFile(e),onSuccess:()=>{t.invalidateQueries({queryKey:[`library-files`]}),t.invalidateQueries({queryKey:[`library-folders`]}),t.invalidateQueries({queryKey:[`library-stats`]}),t.invalidateQueries({queryKey:[`library-trash-count`]}),h(e=>e.filter(e=>e!==L?.id)),R(null),n(e(`fileManager.toast.fileDeleted`),`success`)},onError:e=>{R(null),n(e.message,`error`)}}),ot=q({mutationFn:e=>Z.createVariantGroup(e.map(e=>({library_file_id:e}))),onSuccess:r=>{t.invalidateQueries({queryKey:[`library-files`]}),n(e(`fileManager.variants.grouped`,{count:r.members.length}),`success`),h([])},onError:e=>n(e.message,`error`)}),st=q({mutationFn:e=>Z.bulkDeleteLibrary(e,[]),onSuccess:(r,i)=>{t.invalidateQueries({queryKey:[`library-files`]}),t.invalidateQueries({queryKey:[`library-folders`]}),t.invalidateQueries({queryKey:[`library-stats`]}),t.invalidateQueries({queryKey:[`library-trash-count`]}),n(e(`fileManager.toast.filesDeleted`,{count:i.length}),`success`),h([]),R(null)},onError:e=>{R(null),n(e.message,`error`)}}),ct=q({mutationFn:({fileIds:e,folderId:t})=>Z.moveLibraryFiles(e,t),onSuccess:()=>{t.invalidateQueries({queryKey:[`library-files`]}),t.invalidateQueries({queryKey:[`library-folders`]}),h([]),S(!1),n(e(`fileManager.toast.filesMoved`),`success`)},onError:e=>n(e.message,`error`)}),lt=q({mutationFn:({id:e,data:t})=>Z.updateLibraryFolder(e,t),onSuccess:(r,i)=>{t.invalidateQueries({queryKey:[`library-folders`]}),t.invalidateQueries({queryKey:[`project-folders`]}),t.invalidateQueries({queryKey:[`archive-folders`]}),I(null),n(i.data.project_id===0&&i.data.archive_id===0?e(`fileManager.toast.folderUnlinked`):e(`fileManager.toast.folderLinked`),`success`)},onError:e=>n(e.message,`error`)}),ut=q({mutationFn:({id:e,filename:t})=>Z.updateLibraryFile(e,{filename:t}),onSuccess:()=>{t.invalidateQueries({queryKey:[`library-files`]}),ie(null),n(e(`fileManager.toast.fileRenamed`),`success`)},onError:e=>{ie(null),n(e.message,`error`)}}),dt=q({mutationFn:({id:e,name:t})=>Z.updateLibraryFolder(e,{name:t}),onSuccess:()=>{t.invalidateQueries({queryKey:[`library-folders`]}),t.invalidateQueries({queryKey:[`library-files`]}),ie(null),n(e(`fileManager.toast.folderRenamed`),`success`)},onError:e=>{ie(null),n(e.message,`error`)}}),ft=q({mutationFn:()=>Z.batchGenerateStlThumbnails({all_missing:!0}),onSuccess:r=>{if(t.invalidateQueries({queryKey:[`library-files`]}),r.succeeded>0){let e=Date.now(),t={};r.results.forEach(n=>{n.success&&(t[n.file_id]=e)}),oe(e=>({...e,...t}))}r.succeeded>0&&r.failed===0?n(e(`fileManager.toast.thumbnailsGenerated`,{count:r.succeeded}),`success`):r.succeeded>0&&r.failed>0?n(e(`fileManager.toast.thumbnailsGeneratedPartial`,{succeeded:r.succeeded,failed:r.failed}),`success`):r.processed===0?n(e(`fileManager.toast.noStlMissingThumbnails`),`info`):n(e(`fileManager.toast.failedToGenerateThumbnails`,{error:r.results[0]?.error||`Unknown error`}),`error`)},onError:e=>n(e.message,`error`)}),pt=q({mutationFn:e=>Z.batchGenerateStlThumbnails({file_ids:[e]}),onSuccess:r=>{if(t.invalidateQueries({queryKey:[`library-files`]}),r.succeeded>0){let t=r.results[0]?.file_id;t&&oe(e=>({...e,[t]:Date.now()})),n(e(`fileManager.toast.thumbnailGenerated`),`success`)}else n(e(`fileManager.toast.failedToGenerateThumbnail`,{error:r.results[0]?.error||`Unknown error`}),`error`)},onError:e=>n(e.message,`error`)}),mt=(0,y.useMemo)(()=>Je?Je.filter(e=>m.includes(e.id)&&F5(e)):[],[Je,m]),{data:ht}=K({queryKey:[`variant-group`,z?.variant_group_id],queryFn:()=>Z.getVariantGroup(z.variant_group_id),enabled:!!z?.variant_group_id}),gt=(0,y.useMemo)(()=>{if(z){if(mt.length>1)return mt.map(e=>({id:e.id,filename:e.filename,sliced_for_model:e.sliced_for_model}));if(ht&&ht.members.length>1)return ht.members.map(e=>({id:e.library_file_id,filename:e.filename,sliced_for_model:e.target_model}))}},[z,mt,ht]),_t=(0,y.useCallback)(e=>{h(t=>t.includes(e)?t.filter(t=>t!==e):[...t,e])},[]),vt=(0,y.useCallback)(()=>{$e.length>0&&h($e.map(e=>e.id))},[$e]),yt=(0,y.useCallback)(()=>{h([])},[]),bt=()=>{t.invalidateQueries({queryKey:[`library-files`]}),t.invalidateQueries({queryKey:[`library-folders`]}),t.invalidateQueries({queryKey:[`library-stats`]})},{isDraggingOver:xt,dragHandlers:St}=rK({disabled:!r(`library:upload`)||C,onFiles:e=>{E(e),w(!0)}}),Ct=e=>{Z.downloadLibraryFile(e).catch(e=>{console.error(`Library file download failed:`,e)})},wt=()=>{L&&(L.type===`file`?at.mutate(L.id):L.type===`folder`?it.mutate(L.id):L.type===`bulk`&&st.mutate(m))},Tt=it.isPending||at.isPending||st.isPending,Et=e=>{le(e),localStorage.setItem(`library-view-mode`,e)},Dt=Be||Ye,Ot=(0,y.useMemo)(()=>{if(!u||!ze)return null;let e=t=>{for(let n of t){if(n.id===u)return n;let t=e(n.children);if(t)return t}return null};return e(ze)},[u,ze]);return(0,G.jsxs)(`div`,{className:`p-4 md:p-8 min-h-[calc(100vh-64px)] lg:h-[calc(100vh-64px)] flex flex-col relative`,...St,children:[xt&&(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 bg-bambu-dark/90 flex items-center justify-center pointer-events-none`,children:(0,G.jsxs)(`div`,{className:`border-4 border-dashed border-bambu-green rounded-xl p-12 text-center`,children:[(0,G.jsx)(Bu,{className:`w-16 h-16 mx-auto mb-4 text-bambu-green`}),(0,G.jsx)(`p`,{className:`text-2xl font-semibold text-white mb-2`,children:e(`fileManager.dropFilesHere`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`fileManager.releaseToUpload`)})]})}),(0,G.jsxs)(`div`,{className:`flex flex-col sm:flex-row sm:items-center justify-between gap-4 mb-6`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(_c,{className:`w-7 h-7 text-bambu-green`}),e(`fileManager.title`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:e(`fileManager.subtitle`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center bg-bambu-dark rounded-lg p-1`,children:[(0,G.jsx)(`button`,{onClick:()=>Et(`grid`),className:`p-1.5 rounded transition-colors ${ce===`grid`?`bg-bambu-dark-secondary text-white`:`text-bambu-gray hover:text-white`}`,title:e(`fileManager.gridView`),children:(0,G.jsx)(Jc,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>Et(`list`),className:`p-1.5 rounded transition-colors ${ce===`list`?`bg-bambu-dark-secondary text-white`:`text-bambu-gray hover:text-white`}`,title:e(`fileManager.listView`),children:(0,G.jsx)($c,{className:`w-4 h-4`})})]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>ft.mutate(),disabled:ft.isPending||!i(`library:update_own`,`library:update_all`),title:i(`library:update_own`,`library:update_all`)?e(`fileManager.generateThumbnailsForMissing`):e(`fileManager.noPermissionGenerateThumbnail`),children:[ft.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 mr-2 animate-spin`}):(0,G.jsx)(Vc,{className:`w-4 h-4 mr-2`}),e(`fileManager.generateThumbnails`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>b(!0),disabled:!r(`library:upload`),title:r(`library:upload`)?e(`fileManager.linkExternalFolder`):e(`fileManager.noPermissionCreateFolder`),children:[(0,G.jsx)(yc,{className:`w-4 h-4 mr-2`}),e(`fileManager.linkExternal`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>_(!0),disabled:!r(`library:upload`),title:r(`library:upload`)?void 0:e(`fileManager.noPermissionCreateFolder`),children:[(0,G.jsx)(vc,{className:`w-4 h-4 mr-2`}),e(`fileManager.newFolder`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>A(!0),title:e(`fileManager.tags.manageTitle`),children:[(0,G.jsx)(Tu,{className:`w-4 h-4 mr-2`}),e(`fileManager.tags.manage`)]}),r(`library:purge`)&&(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>O(!0),title:e(`libraryPurge.headerTooltip`),children:[(0,G.jsx)(Nu,{className:`w-4 h-4 mr-2`}),e(`libraryPurge.headerButton`)]}),i(`library:delete_own`,`library:delete_all`)&&(0,G.jsxs)(Ai,{to:`/files/trash`,className:`inline-flex items-center px-3 py-1.5 text-sm rounded bg-bambu-dark-secondary text-bambu-gray hover:text-white hover:bg-bambu-dark transition-colors`,title:e(`libraryTrash.headerTooltip`),children:[(0,G.jsx)(Nu,{className:`w-4 h-4 mr-2`}),e(`libraryTrash.headerButton`),typeof He==`number`&&He>0&&(0,G.jsx)(`span`,{className:`ml-1.5 px-1.5 py-0.5 text-xs rounded-full bg-bambu-green/20 text-bambu-green`,children:He})]}),(0,G.jsxs)(Q,{onClick:()=>w(!0),disabled:!r(`library:upload`),title:r(`library:upload`)?void 0:e(`fileManager.noPermissionUpload`),children:[(0,G.jsx)(Bu,{className:`w-4 h-4 mr-2`}),e(`common.upload`)]})]})]}),et&&Xe&&Fe&&(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mb-4 p-3 bg-amber-500/10 border border-amber-500/30 rounded-lg`,children:[(0,G.jsx)(Iu,{className:`w-5 h-5 text-amber-500 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`p`,{className:`text-sm text-amber-500 font-medium`,children:e(`fileManager.lowDiskSpaceWarning`)}),(0,G.jsx)(`p`,{className:`text-xs text-amber-500/80`,children:e(`fileManager.lowDiskSpaceDetails`,{free:Ud(Xe.disk_free_bytes),total:Ud(Xe.disk_total_bytes),threshold:Fe.library_disk_warning_gb})})]})]}),Xe&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-3 sm:gap-6 mb-6 p-3 bg-bambu-dark-secondary rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(fc,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[e(`fileManager.files`),`:`]}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:Xe.total_files})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(_c,{className:`w-4 h-4 text-blue-600 dark:text-blue-400`}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[e(`fileManager.folders`),`:`]}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:Xe.total_folders})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(Nc,{className:`w-4 h-4 text-amber-600 dark:text-amber-400`}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[e(`fileManager.size`),`:`]}),(0,G.jsx)(`span`,{className:`text-white font-medium`,children:Ud(Xe.total_size_bytes)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm sm:ml-auto`,children:[(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[e(`fileManager.free`),`:`]}),(0,G.jsx)(`span`,{className:`font-medium ${et?`text-amber-500`:`text-white`}`,children:Ud(Xe.disk_free_bytes)})]})]}),(0,G.jsxs)(`div`,{className:`flex-1 flex flex-col lg:flex-row gap-4 lg:gap-6 min-h-0`,children:[(0,G.jsx)(`div`,{className:`lg:hidden`,children:(0,G.jsxs)(`select`,{value:u===null?`__top:${f}`:String(u),onChange:e=>{let t=e.target.value;t.startsWith(`__top:`)?(d(null),p(t.slice(6))):d(parseInt(t,10))},className:`w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg px-3 py-2.5 text-white focus:outline-none focus:border-bambu-green`,children:[(0,G.jsxs)(`option`,{value:`__top:internal`,children:[`📁 `,e(`fileManager.allFiles`)]}),ze?.some(e=>e.is_external)&&(0,G.jsxs)(`option`,{value:`__top:external`,children:[`🔗 `,e(`fileManager.allExternal`)]}),Ve&&(()=>{let e=(t,n=0)=>{let r=[];for(let i of t)r.push({id:i.id,name:i.name,fileCount:i.file_count,depth:n}),i.children.length>0&&r.push(...e(i.children,n+1));return r};return e(Ve).map(e=>(0,G.jsxs)(`option`,{value:e.id,children:[`│ `.repeat(e.depth),`📂 `,e.name,` `,e.fileCount>0?`(${e.fileCount})`:``]},e.id))})()]})}),(0,G.jsxs)(`div`,{ref:Se,className:`hidden lg:flex flex-shrink-0 bg-bambu-dark-secondary rounded-lg border border-bambu-dark-tertiary overflow-hidden flex-col relative`,style:{width:`${ve}px`},children:[(0,G.jsx)(`div`,{className:`absolute right-0 top-0 bottom-0 w-1.5 cursor-col-resize z-10 group/resize flex items-center justify-center transition-colors ${be?`bg-bambu-green`:`hover:bg-bambu-green/50`}`,onMouseDown:e=>{e.preventDefault(),xe(!0)},onDoubleClick:()=>{ye(256),localStorage.setItem(`library-sidebar-width`,`256`)},title:e(`fileManager.dragToResizeTooltip`),children:(0,G.jsxs)(`div`,{className:`flex flex-col gap-1 opacity-0 group-hover/resize:opacity-100 transition-opacity ${be?`opacity-100`:``}`,children:[(0,G.jsx)(`div`,{className:`w-0.5 h-0.5 rounded-full bg-white/70`}),(0,G.jsx)(`div`,{className:`w-0.5 h-0.5 rounded-full bg-white/70`}),(0,G.jsx)(`div`,{className:`w-0.5 h-0.5 rounded-full bg-white/70`})]})}),(0,G.jsxs)(`div`,{className:`p-3 border-b border-bambu-dark-tertiary flex items-center justify-between`,children:[(0,G.jsx)(`h2`,{className:`text-sm font-medium text-white`,children:e(`fileManager.folders`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsxs)(`select`,{value:me,onChange:e=>{let t=e.target.value===`activity`?`activity`:`name`;he(t),localStorage.setItem(`library-folder-sort-field`,t)},className:`text-xs px-1 py-0.5 rounded bg-bambu-dark border border-bambu-dark-tertiary text-bambu-gray focus:outline-none focus:border-bambu-green`,title:e(`fileManager.folderSort`),"aria-label":e(`fileManager.folderSort`),children:[(0,G.jsx)(`option`,{value:`name`,children:e(`fileManager.folderSortByName`)}),(0,G.jsx)(`option`,{value:`activity`,children:e(`fileManager.folderSortByActivity`)})]}),(0,G.jsx)(`button`,{onClick:()=>{let e=ge===`asc`?`desc`:`asc`;_e(e),localStorage.setItem(`library-folder-sort-direction`,e)},className:`text-bambu-gray hover:text-white hover:bg-bambu-dark p-1 rounded transition-colors`,title:e(ge===`asc`?`fileManager.ascending`:`fileManager.descending`),"aria-label":e(ge===`asc`?`fileManager.ascending`:`fileManager.descending`),children:ge===`asc`?(0,G.jsx)(Vo,{className:`w-3.5 h-3.5`}):(0,G.jsx)(Fo,{className:`w-3.5 h-3.5`})}),(0,G.jsx)(`button`,{onClick:()=>{let e=!fe;pe(e),localStorage.setItem(`library-collapse-folders`,String(e))},className:`text-xs px-1.5 py-0.5 rounded transition-colors ${fe?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:text-white hover:bg-bambu-dark`}`,title:e(fe?`fileManager.expandFoldersByDefault`:`fileManager.collapseFoldersByDefault`),children:e(`fileManager.collapse`)}),(0,G.jsx)(`button`,{onClick:()=>{let e=!ue;de(e),localStorage.setItem(`library-wrap-folders`,String(e))},className:`text-xs px-1.5 py-0.5 rounded transition-colors ${ue?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:text-white hover:bg-bambu-dark`}`,title:e(ue?`fileManager.disableTextWrapping`:`fileManager.enableTextWrapping`),children:e(`fileManager.wrap`)})]})]}),(0,G.jsxs)(`div`,{className:`flex-1 overflow-y-auto p-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 px-2 py-1.5 rounded cursor-pointer transition-colors ${u===null&&f===`internal`?`bg-bambu-green/20 text-bambu-green`:`hover:bg-bambu-dark text-white`}`,onClick:()=>{d(null),p(`internal`)},children:[(0,G.jsx)(oc,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`text-sm`,children:e(`fileManager.allFiles`)})]}),ze?.some(e=>e.is_external)&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 px-2 py-1.5 rounded cursor-pointer transition-colors ${u===null&&f===`external`?`bg-bambu-green/20 text-bambu-green`:`hover:bg-bambu-dark text-white`}`,onClick:()=>{d(null),p(`external`)},children:[(0,G.jsx)(yc,{className:`w-4 h-4 text-purple-600 dark:text-purple-400`}),(0,G.jsx)(`span`,{className:`text-sm`,children:e(`fileManager.allExternal`)})]}),Ve?.map(t=>(0,G.jsx)(b$e,{folder:t,selectedFolderId:u,onSelect:d,onDelete:e=>R({type:`folder`,id:e}),onLink:I,onRename:e=>ie({type:`folder`,id:e.id,name:e.name}),wrapNames:ue,defaultExpanded:!fe,showModified:Ne,hasPermission:r,t:e},`${t.id}-${fe?`c`:`e`}`))]})]}),(0,G.jsxs)(`div`,{className:`flex-1 flex flex-col lg:flex-row min-w-0 min-h-0 gap-4 lg:gap-6`,children:[(0,G.jsxs)(`div`,{className:`flex-1 flex flex-col min-w-0 min-h-0`,children:[Ge.length>0&&(0,G.jsxs)(`div`,{className:`mb-3 flex flex-wrap items-center gap-2 p-2 sm:p-3 bg-bambu-dark-secondary rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray font-medium shrink-0`,children:e(`fileManager.tags.filterLabel`)}),Ge.map(e=>{let t=N.includes(e.id);return(0,G.jsxs)(`button`,{type:`button`,onClick:()=>qe(e.id),className:t?`inline-flex items-center gap-1 px-2 py-0.5 rounded-full text-xs bg-bambu-green/20 text-bambu-green border border-bambu-green/40 hover:bg-bambu-green/30 transition-colors`:`inline-flex items-center gap-1 px-2 py-0.5 rounded-full text-xs bg-bambu-dark text-bambu-gray border border-bambu-dark-tertiary hover:text-white hover:border-bambu-green/40 transition-colors`,title:e.name,children:[(0,G.jsx)(Tu,{className:`w-3 h-3`}),(0,G.jsx)(`span`,{children:e.name}),t&&(0,G.jsx)(td,{className:`w-3 h-3`})]},e.id)}),N.length>0&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>P([]),className:`ml-auto text-xs text-bambu-gray hover:text-white shrink-0`,children:e(`fileManager.tags.clearAll`)})]}),Ot?.is_external&&(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mb-4 p-3 bg-purple-50 dark:bg-purple-500/10 border border-purple-300 dark:border-purple-500/30 rounded-lg`,children:[(0,G.jsx)(yc,{className:`w-5 h-5 text-purple-600 dark:text-purple-400 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-sm font-medium text-purple-700 dark:text-purple-300`,children:e(`fileManager.externalFolder`)}),Ot.external_readonly&&(0,G.jsxs)(`span`,{className:`text-xs px-1.5 py-0.5 rounded bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400 flex items-center gap-1`,children:[(0,G.jsx)(tl,{className:`w-3 h-3`}),e(`fileManager.readOnly`)]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray truncate font-mono`,title:Ot.external_path||``,children:Ot.external_path})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>u&&rt.mutate(u),disabled:rt.isPending,title:e(`fileManager.scanFolder`),children:[rt.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Vl,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`ml-1.5`,children:e(`fileManager.scanFolder`)})]})]}),Je&&Je.length>0&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 sm:gap-3 mb-4 p-2 sm:p-3 bg-bambu-dark-secondary rounded-lg border border-bambu-dark-tertiary sticky top-0 z-10 lg:static`,children:[(0,G.jsxs)(`div`,{className:`relative w-full sm:w-auto sm:flex-1 sm:max-w-xs`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,placeholder:e(`fileManager.searchFiles`),value:Ce,onChange:e=>we(e.target.value),className:`w-full pl-9 pr-3 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green`}),Ue&&(0,G.jsx)(`span`,{className:`absolute -bottom-4 left-0 text-[10px] text-bambu-gray whitespace-nowrap`,title:e(`fileManager.searchSubfoldersHint`),children:e(`fileManager.searchSubfoldersHint`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Cc,{className:`w-4 h-4 text-bambu-gray hidden sm:block`}),(0,G.jsxs)(`select`,{value:Te,onChange:e=>Ee(e.target.value),className:`bg-bambu-dark border border-bambu-dark-tertiary rounded px-2 py-1.5 text-sm text-white focus:outline-none focus:border-bambu-green`,children:[(0,G.jsx)(`option`,{value:`all`,children:e(`fileManager.allTypes`)}),Qe.map(e=>(0,G.jsx)(`option`,{value:e,children:e.toUpperCase()},e))]})]}),o&&(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`input`,{type:`text`,placeholder:e(`fileManager.filterByUser`,{defaultValue:`Filter by user`}),value:De,onChange:e=>Oe(e.target.value),list:`usernames-list`,className:`w-32 sm:w-40 px-2 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green ${De?`pr-7`:``}`,style:De?{WebkitAppearance:`none`,MozAppearance:`textfield`}:void 0}),De&&(0,G.jsx)(`button`,{onClick:()=>Oe(``),className:`absolute right-2 top-1/2 -translate-y-1/2 text-bambu-gray hover:text-white z-10`,children:(0,G.jsx)(td,{className:`w-3 h-3`})}),(0,G.jsx)(`datalist`,{id:`usernames-list`,children:Ze?.map(e=>(0,G.jsx)(`option`,{value:e.username},e.id))})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`select`,{value:ke,onChange:e=>{let t=e.target.value;Ae(t),localStorage.setItem(`library-sort-field`,t)},className:`bg-bambu-dark border border-bambu-dark-tertiary rounded px-2 py-1.5 text-sm text-white focus:outline-none focus:border-bambu-green`,children:[(0,G.jsx)(`option`,{value:`name`,children:e(`common.name`)}),(0,G.jsx)(`option`,{value:`date`,children:e(`common.date`)}),(0,G.jsx)(`option`,{value:`size`,children:e(`fileManager.size`)}),(0,G.jsx)(`option`,{value:`type`,children:e(`common.type`)}),(0,G.jsx)(`option`,{value:`prints`,children:e(`fileManager.prints`)})]}),(0,G.jsx)(`button`,{onClick:()=>Me(e=>{let t=e===`asc`?`desc`:`asc`;return localStorage.setItem(`library-sort-direction`,t),t}),className:`p-1.5 rounded bg-bambu-dark border border-bambu-dark-tertiary hover:border-bambu-green transition-colors`,title:e(je===`asc`?`fileManager.ascending`:`fileManager.descending`),children:je===`asc`?(0,G.jsx)(Vo,{className:`w-4 h-4 text-white`}):(0,G.jsx)(Fo,{className:`w-4 h-4 text-white`})}),(0,G.jsx)(`button`,{onClick:()=>Pe(e=>{let t=!e;return localStorage.setItem(`library-show-modified`,String(t)),t}),className:`p-1.5 rounded bg-bambu-dark border transition-colors ${Ne?`border-bambu-green text-bambu-green`:`border-bambu-dark-tertiary text-white hover:border-bambu-green`}`,title:e(Ne?`fileManager.hideModified`:`fileManager.showModified`),"aria-pressed":Ne,children:(0,G.jsx)(rs,{className:`w-4 h-4`})})]}),(Ce||Te!==`all`||De)&&(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray hidden sm:inline`,children:e(`fileManager.resultsCount`,{showing:$e.length,total:Je.length})})]}),$e.length>0&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 mb-4 p-2 bg-bambu-dark-secondary rounded-lg border border-bambu-dark-tertiary sticky top-[52px] z-10 lg:static`,children:[m.length===$e.length&&m.length>0?(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:yt,children:[(0,G.jsx)(yu,{className:`w-4 h-4 sm:mr-1`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`fileManager.deselectAll`)})]}):(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:vt,children:[(0,G.jsx)(_u,{className:`w-4 h-4 sm:mr-1`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`fileManager.selectAll`)})]}),m.length>0&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray ml-2`,children:e(`fileManager.selected`,{count:m.length})}),(0,G.jsx)(`div`,{className:`hidden sm:block flex-1`}),(0,G.jsxs)(`div`,{className:`w-full sm:w-auto flex flex-wrap items-center gap-2 mt-2 sm:mt-0`,children:[mt.length>=1&&(0,G.jsxs)(Q,{variant:`primary`,size:`sm`,onClick:()=>B(mt[0]),disabled:!r(`queue:create`),title:r(`queue:create`)?void 0:e(`fileManager.noPermissionAddToQueue`),children:[(0,G.jsx)(Ll,{className:`w-4 h-4 sm:mr-1`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:mt.length>1?e(`fileManager.variants.printAlternatives`,{count:mt.length}):e(`common.print`)})]}),mt.length>=2&&!mt.some(e=>e.variant_group_id)&&(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>ot.mutate(mt.map(e=>e.id)),disabled:ot.isPending||!i(`library:update_own`,`library:update_all`),title:e(`fileManager.variants.groupTooltip`),children:[(0,G.jsx)(qc,{className:`w-4 h-4 sm:mr-1`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`fileManager.variants.groupAction`)})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>S(!0),disabled:!i(`library:update_own`,`library:update_all`),title:i(`library:update_own`,`library:update_all`)?void 0:e(`fileManager.noPermissionMoveFiles`),children:[(0,G.jsx)(_l,{className:`w-4 h-4 sm:mr-1`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.move`)})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:()=>M(!0),disabled:!i(`library:update_own`,`library:update_all`),title:i(`library:update_own`,`library:update_all`)?e(`fileManager.tags.bulkTooltip`):e(`fileManager.tags.noPermission`),children:[(0,G.jsx)(Tu,{className:`w-4 h-4 sm:mr-1`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`fileManager.tags.tagAction`)})]}),(0,G.jsxs)(Q,{variant:`danger`,size:`sm`,onClick:()=>{m.length===1?R({type:`file`,id:m[0]}):R({type:`bulk`,id:0,count:m.length})},disabled:!i(`library:delete_own`,`library:delete_all`),title:i(`library:delete_own`,`library:delete_all`)?void 0:e(`fileManager.noPermissionDeleteFiles`),children:[(0,G.jsx)(Nu,{className:`w-4 h-4 sm:mr-1`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.delete`)})]}),(0,G.jsxs)(Q,{variant:`secondary`,size:`sm`,onClick:yt,children:[(0,G.jsx)(td,{className:`w-4 h-4 sm:mr-1`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:e(`common.clear`)})]})]})]})]}),Dt?(0,G.jsx)(`div`,{className:`flex-1 flex items-center justify-center`,children:(0,G.jsxs)(`div`,{className:`flex flex-col items-center gap-3`,children:[(0,G.jsx)(Y,{className:`w-8 h-8 animate-spin text-bambu-green`}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`fileManager.loadingFiles`)})]})}):Je?.length===0?(0,G.jsxs)(`div`,{className:`flex-1 flex flex-col items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`p-4 bg-bambu-dark rounded-2xl mb-4`,children:(0,G.jsx)(oc,{className:`w-12 h-12 text-bambu-gray/50`})}),(0,G.jsx)(`h3`,{className:`text-lg font-medium text-white mb-2`,children:e(u===null?f===`external`?`fileManager.externalIsEmpty`:`fileManager.noFilesYet`:`fileManager.folderIsEmpty`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-center max-w-md mb-6`,children:e(u===null?f===`external`?`fileManager.externalEmptyDescription`:`fileManager.noFilesDescription`:`fileManager.folderEmptyDescription`)}),(0,G.jsxs)(Q,{onClick:()=>w(!0),disabled:!r(`library:upload`),title:r(`library:upload`)?void 0:e(`fileManager.noPermissionUpload`),children:[(0,G.jsx)(Pl,{className:`w-4 h-4 mr-2`}),e(`fileManager.uploadFiles`)]})]}):$e.length===0?(0,G.jsxs)(`div`,{className:`flex-1 flex flex-col items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`p-4 bg-bambu-dark rounded-2xl mb-4`,children:(0,G.jsx)(Zl,{className:`w-12 h-12 text-bambu-gray/50`})}),(0,G.jsx)(`h3`,{className:`text-lg font-medium text-white mb-2`,children:e(`fileManager.noMatchingFiles`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray text-center max-w-md mb-6`,children:e(`fileManager.noMatchingFilesDescription`)}),(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>{we(``),Ee(`all`)},children:e(`fileManager.clearFilters`)})]}):ce===`grid`?(0,G.jsx)(`div`,{className:`flex-1 lg:overflow-y-auto`,children:(0,G.jsx)(`div`,{className:`grid grid-cols-2 sm:grid-cols-3 lg:grid-cols-4 xl:grid-cols-5 2xl:grid-cols-6 gap-4`,children:$e.map(t=>(0,G.jsx)(x$e,{file:t,isSelected:m.includes(t.id),t:e,onSelect:_t,onDelete:e=>R({type:`file`,id:e}),onDownload:Ct,onPrint:B,onSlice:ee,onOpenInSlicer:Le,desktopSlicer:Ie,onRunPipeline:ne,useSlicerApi:Fe?.use_slicer_api??!1,canSlice:Re(),onPreview3d:e=>{F5(e)?c(`/gcode-viewer?library_file=${e.id}`):H(e)},onRename:e=>ie({type:`file`,id:e.id,name:e.filename}),onGenerateThumbnail:e=>pt.mutate(e.id),onTagClick:qe,thumbnailVersion:ae[t.id],hasPermission:r,canModify:a,authEnabled:o,showModified:Ne},t.id))})}):(0,G.jsx)(`div`,{className:`flex-1 lg:overflow-y-auto`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg border border-bambu-dark-tertiary overflow-x-auto`,children:[(0,G.jsxs)(`div`,{className:`hidden sm:grid ${o?`grid-cols-[auto_1fr_120px_100px_100px_100px_minmax(0,200px)_220px]`:`grid-cols-[auto_1fr_100px_100px_100px_minmax(0,200px)_220px]`} gap-4 px-4 py-2 bg-bambu-dark-secondary border-b border-bambu-dark-tertiary text-xs text-bambu-gray font-medium`,children:[(0,G.jsx)(`div`,{className:`w-6`}),(0,G.jsx)(`div`,{children:e(`common.name`)}),o&&(0,G.jsx)(`div`,{children:e(`fileManager.uploadedBy`,{defaultValue:`Uploaded By`})}),(0,G.jsx)(`div`,{children:e(`common.type`)}),(0,G.jsx)(`div`,{children:e(`fileManager.size`)}),(0,G.jsx)(`div`,{children:e(`fileManager.prints`)}),(0,G.jsx)(`div`,{children:e(`fileManager.tags.title`)}),(0,G.jsx)(`div`,{})]}),$e.map(t=>(0,G.jsxs)(`div`,{className:`grid ${o?`grid-cols-[auto_1fr_120px_100px_100px_100px_minmax(0,200px)_220px]`:`grid-cols-[auto_1fr_100px_100px_100px_minmax(0,200px)_220px]`} gap-4 px-4 py-3 items-center border-b border-bambu-dark-tertiary last:border-b-0 cursor-pointer hover:bg-bambu-dark/50 transition-colors ${m.includes(t.id)?`bg-bambu-green/10`:``}`,onClick:()=>_t(t.id),children:[(0,G.jsx)(`div`,{className:`w-5 h-5 rounded border-2 flex items-center justify-center ${m.includes(t.id)?`bg-bambu-green border-bambu-green`:`border-bambu-gray/50`}`,children:m.includes(t.id)&&(0,G.jsx)(`div`,{className:`w-2 h-2 bg-white rounded-sm`})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`relative group/thumb`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded bg-bambu-dark flex-shrink-0 overflow-hidden`,children:t.thumbnail_path?(0,G.jsx)(`img`,{src:`${Z.getLibraryFileThumbnailUrl(t.id)}${ae[t.id]?(Z.getLibraryFileThumbnailUrl(t.id).includes(`?`)?`&`:`?`)+`v=${ae[t.id]}`:``}`,alt:``,className:`w-full h-full object-cover`}):(0,G.jsx)(`div`,{className:`w-full h-full flex items-center justify-center`,children:(0,G.jsx)(oc,{className:`w-5 h-5 text-bambu-gray/50`})})}),t.thumbnail_path&&(0,G.jsx)(`div`,{className:`absolute left-0 top-full mt-2 z-50 hidden group-hover/thumb:block`,children:(0,G.jsx)(`div`,{className:`w-48 h-48 rounded-lg bg-bambu-dark-secondary border border-bambu-dark-tertiary shadow-xl overflow-hidden`,children:(0,G.jsx)(`img`,{src:`${Z.getLibraryFileThumbnailUrl(t.id)}${ae[t.id]?(Z.getLibraryFileThumbnailUrl(t.id).includes(`?`)?`&`:`?`)+`v=${ae[t.id]}`:``}`,alt:t.filename,className:`w-full h-full object-contain`})})})]}),(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`div`,{className:`text-sm text-white truncate`,children:t.print_name||t.filename}),Ne&&(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray flex items-center gap-1 mt-0.5`,title:e(`fileManager.lastModified`),children:[(0,G.jsx)(rs,{className:`w-3 h-3 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,children:tp(t.fs_modified_at??t.created_at)})]})]})]}),o&&(0,G.jsx)(`div`,{className:`text-sm text-bambu-gray flex items-center gap-1`,children:t.created_by_username?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Vu,{className:`w-3 h-3`}),(0,G.jsx)(`span`,{className:`truncate`,children:t.created_by_username})]}):`-`}),(0,G.jsx)(`div`,{children:(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded font-medium ${t.file_type===`3mf`?`bg-bambu-green/20 text-bambu-green`:t.file_type===`gcode`||t.file_type===`gcode.3mf`?`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`:t.file_type===`stl`?`bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-400`:`bg-bambu-gray/20 text-bambu-gray`}`,children:t.file_type.toUpperCase()})}),(0,G.jsx)(`div`,{className:`text-sm text-bambu-gray`,children:Ud(t.file_size)}),(0,G.jsx)(`div`,{className:`text-sm text-bambu-gray`,children:t.print_count>0?`${t.print_count}x`:`-`}),(0,G.jsx)(`div`,{className:`min-w-0`,onClick:e=>e.stopPropagation(),children:!t.tags||t.tags.length===0?(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray/50`,children:`-`}):(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1`,children:t.tags.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>qe(e.id),className:`inline-flex items-center gap-0.5 px-1.5 py-0.5 rounded-full text-[10px] bg-bambu-green/10 text-bambu-green hover:bg-bambu-green/20 transition-colors max-w-full`,title:e.name,children:[(0,G.jsx)(Tu,{className:`w-2.5 h-2.5 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`truncate`,children:e.name})]},e.id))})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,onClick:e=>e.stopPropagation(),children:[F5(t)&&(0,G.jsx)(G.Fragment,{children:(0,G.jsx)(`button`,{onClick:()=>r(`queue:create`)&&B(t),className:`p-1.5 rounded transition-colors ${r(`queue:create`)?`hover:bg-bambu-dark text-bambu-gray hover:text-bambu-green`:`text-bambu-gray/50 cursor-not-allowed`}`,title:r(`queue:create`)?e(`common.print`):e(`fileManager.noPermissionAddToQueue`),disabled:!r(`queue:create`),children:(0,G.jsx)(Ll,{className:`w-4 h-4`})})}),I5(t,!!Fe?.use_slicer_api,Ie)&&(0,G.jsx)(`button`,{onClick:()=>{Re()&&(Fe?.use_slicer_api?ee:Le)(t)},className:`p-1.5 rounded transition-colors ${Re()?`hover:bg-bambu-dark text-bambu-gray hover:text-bambu-green`:`text-bambu-gray/50 cursor-not-allowed`}`,title:Re()?e(`slice.action`):Fe?.use_slicer_api?e(`fileManager.noPermissionSlice`):e(`fileManager.noPermissionDownload`),disabled:!Re(),children:Fe?.use_slicer_api?(0,G.jsx)(Rs,{className:`w-4 h-4`}):(0,G.jsx)(nc,{className:`w-4 h-4`})}),(Fe?.use_slicer_api??!1)&&I5(t,!0,Ie)&&(0,G.jsx)(`button`,{onClick:()=>r(`pipelines:run`)&&ne(t),className:`p-1.5 rounded transition-colors ${r(`pipelines:run`)?`hover:bg-bambu-dark text-bambu-gray hover:text-bambu-green`:`text-bambu-gray/50 cursor-not-allowed`}`,title:r(`pipelines:run`)?e(`library.runWithPipeline.actionLabel`,`Run with pipeline`):e(`library.runWithPipeline.noPermission`,`You do not have permission to run pipelines`),disabled:!r(`pipelines:run`),children:(0,G.jsx)(Ml,{className:`w-4 h-4`})}),(t.file_type===`3mf`||t.file_type===`gcode`||t.file_type===`gcode.3mf`||t.file_type===`stl`)&&(0,G.jsx)(`button`,{onClick:()=>{r(`library:read`)&&(F5(t)?c(`/gcode-viewer?library_file=${t.id}`):H(t))},className:`p-1.5 rounded transition-colors ${r(`library:read`)?`hover:bg-bambu-dark text-bambu-gray hover:text-bambu-green`:`text-bambu-gray/50 cursor-not-allowed`}`,title:r(`library:read`)?`3D Preview`:`You do not have permission to preview files`,disabled:!r(`library:read`),children:(0,G.jsx)(Zo,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>r(`library:read`)&&Ct(t.id),className:`p-1.5 rounded transition-colors ${r(`library:read`)?`hover:bg-bambu-dark text-bambu-gray hover:text-white`:`text-bambu-gray/50 cursor-not-allowed`}`,title:r(`library:read`)?e(`common.download`):e(`fileManager.noPermissionDownload`),disabled:!r(`library:read`),children:(0,G.jsx)(Ys,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>a(`library`,`update`,t.created_by_id)&&ie({type:`file`,id:t.id,name:t.filename}),className:`p-1.5 rounded transition-colors ${a(`library`,`update`,t.created_by_id)?`hover:bg-bambu-dark text-bambu-gray hover:text-white`:`text-bambu-gray/50 cursor-not-allowed`}`,title:a(`library`,`update`,t.created_by_id)?e(`common.rename`):e(`fileManager.noPermissionRenameFile`),disabled:!a(`library`,`update`,t.created_by_id),children:(0,G.jsx)(kl,{className:`w-4 h-4`})}),t.file_type===`stl`&&(0,G.jsx)(`button`,{onClick:()=>a(`library`,`update`,t.created_by_id)&&pt.mutate(t.id),className:`p-1.5 rounded transition-colors ${a(`library`,`update`,t.created_by_id)?`hover:bg-bambu-dark text-bambu-gray hover:text-bambu-green`:`text-bambu-gray/50 cursor-not-allowed`}`,title:a(`library`,`update`,t.created_by_id)?e(`fileManager.generateThumbnail`):e(`fileManager.noPermissionGenerateThumbnail`),disabled:pt.isPending||!a(`library`,`update`,t.created_by_id),children:(0,G.jsx)(Vc,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>a(`library`,`delete`,t.created_by_id)&&R({type:`file`,id:t.id}),className:`p-1.5 rounded transition-colors ${a(`library`,`delete`,t.created_by_id)?`hover:bg-bambu-dark text-bambu-gray hover:text-red-700 dark:hover:text-red-400`:`text-bambu-gray/50 cursor-not-allowed`}`,title:a(`library`,`delete`,t.created_by_id)?e(`common.delete`):e(`fileManager.noPermissionDeleteFile`),disabled:!a(`library`,`delete`,t.created_by_id),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})]},t.id))]})})]}),u!==null&&(0,G.jsx)(l$e,{folderId:u})]})]}),g&&(0,G.jsx)(p$e,{parentId:u,onClose:()=>_(!1),onSave:e=>tt.mutate(e),isLoading:tt.isPending,t:e}),v&&(0,G.jsx)(m$e,{onClose:()=>b(!1),onSave:e=>nt.mutate(e),isLoading:nt.isPending,t:e}),x&&ze&&(0,G.jsx)(v$e,{folders:ze,selectedFiles:m,currentFolderId:u,onClose:()=>S(!1),onMove:e=>ct.mutate({fileIds:m,folderId:e}),isLoading:ct.isPending,t:e}),C&&(0,G.jsx)(yW,{folderId:u,onClose:()=>{w(!1),E([])},onUploadComplete:bt,initialFiles:T.length>0?T:void 0}),D&&(0,G.jsx)(f$e,{onClose:()=>O(!1)}),(0,G.jsx)(u$e,{open:k,onClose:()=>A(!1),onPickTag:e=>{N.includes(e)||P(t=>[...t,e])}}),(0,G.jsx)(HKe,{open:j,fileIds:m,onClose:()=>M(!1)}),F&&(0,G.jsx)(y$e,{folder:F,onClose:()=>I(null),onLink:e=>lt.mutate({id:F.id,data:e}),isLoading:lt.isPending,t:e}),L&&(0,G.jsx)(rf,{title:L.type===`folder`?e(`fileManager.deleteFolder`):L.type===`bulk`?e(`fileManager.deleteFilesCount`,{count:L.count}):e(`fileManager.deleteFile`),message:L.type===`folder`?e(`fileManager.deleteFolderConfirm`):L.type===`bulk`?e(`fileManager.deleteFilesConfirm`,{count:L.count}):e(`fileManager.deleteFileConfirm`),confirmText:e(`common.delete`),variant:`danger`,isLoading:Tt,loadingText:e(`fileManager.deleting`),onConfirm:wt,onCancel:()=>R(null)}),z&&(!z.variant_group_id||ht!==void 0)&&(0,G.jsx)(qW,{mode:`create`,libraryFileId:gt?.[0]?.id??z.id,variantFiles:gt,archiveName:gt&&gt.length>1?`${gt[0].filename} ${e(`common.plusNMore`,{count:gt.length-1})}`:z.print_name||z.filename,onClose:()=>B(null),onSuccess:()=>{B(null),h([]),t.invalidateQueries({queryKey:[`library-files`]}),t.invalidateQueries({queryKey:[`queue`]}),t.invalidateQueries({queryKey:[`archives`]})}}),V&&(0,G.jsx)(KG,{source:{kind:`libraryFile`,id:V.id,filename:V.filename},onClose:()=>ee(null)}),te&&(0,G.jsx)(YG,{source:{kind:`libraryFile`,id:te.id,filename:te.filename},onClose:()=>ne(null)}),se&&(0,G.jsx)(VKe,{libraryFileId:se.id,title:se.print_name||se.filename,fileType:se.file_type,onClose:()=>H(null),onSliceWithBambuddy:I5(se,!0,Ie)&&r(`library:upload`)?()=>{let e=se;H(null),ee(e)}:void 0}),re&&(0,G.jsx)(_$e,{type:re.type,currentName:re.name,onClose:()=>ie(null),onSave:e=>{re.type===`file`?ut.mutate({id:re.id,filename:e}):dt.mutate({id:re.id,name:e})},isLoading:ut.isPending||dt.isPending,t:e})]})}function C$e(e){let t=ep(e);if(!t)return``;let n=Math.ceil((t.getTime()-Date.now())/(1e3*60*60*24));return n<=0?`any moment`:n===1?`1 day`:`${n} days`}function w$e(e){let t=ep(e);return t?t.toLocaleString():e}function T$e(){let{t:e}=U(),t=or(),n=co(),{showToast:r}=Gd(),{hasPermission:i,authEnabled:a}=jd(),[o,s]=(0,y.useState)(null),[c,l]=(0,y.useState)(new Set),u=!a||i(`library:purge`),d=K({queryKey:[`library-trash`],queryFn:()=>Z.listLibraryTrash(200,0)}),f=K({queryKey:[`library-trash-settings`],queryFn:()=>Z.getLibraryTrashSettings(),enabled:u}),[p,m]=(0,y.useState)(null);(0,y.useEffect)(()=>{f.data&&p===null&&m(f.data.retention_days)},[f.data,p]);let h=q({mutationFn:e=>{let t=f.data;return Z.updateLibraryTrashSettings({retention_days:e,auto_purge_enabled:t?.auto_purge_enabled??!1,auto_purge_days:t?.auto_purge_days??90,auto_purge_include_never_printed:t?.auto_purge_include_never_printed??!0})},onSuccess:t=>{r(e(`libraryTrash.toast.retentionSaved`,{days:t.retention_days}),`success`),n.invalidateQueries({queryKey:[`library-trash-settings`]}),n.invalidateQueries({queryKey:[`library-trash`]})},onError:t=>r(t.message||e(`libraryTrash.toast.retentionFailed`),`error`)}),g=q({mutationFn:e=>Z.restoreLibraryTrash(e),onSuccess:()=>{r(e(`libraryTrash.toast.restored`),`success`),n.invalidateQueries({queryKey:[`library-trash`]}),n.invalidateQueries({queryKey:[`library-trash-count`]}),n.invalidateQueries({queryKey:[`library-files`]}),n.invalidateQueries({queryKey:[`library-folders`]})},onError:t=>r(t.message||e(`libraryTrash.toast.restoreFailed`),`error`)}),_=q({mutationFn:e=>Z.hardDeleteLibraryTrash(e),onSuccess:()=>{r(e(`libraryTrash.toast.purged`),`success`),n.invalidateQueries({queryKey:[`library-trash`]}),n.invalidateQueries({queryKey:[`library-trash-count`]})},onError:t=>r(t.message||e(`libraryTrash.toast.purgeFailed`),`error`)}),v=q({mutationFn:()=>Z.emptyLibraryTrash(),onSuccess:t=>{r(e(`libraryTrash.toast.emptied`,{count:t.deleted}),`success`),n.invalidateQueries({queryKey:[`library-trash`]}),n.invalidateQueries({queryKey:[`library-trash-count`]})},onError:t=>r(t.message||e(`libraryTrash.toast.emptyFailed`),`error`)}),b=q({mutationFn:e=>Promise.all(e.map(e=>Z.restoreLibraryTrash(e))),onSuccess:(t,i)=>{r(e(`libraryTrash.toast.bulkRestored`,{count:i.length}),`success`),l(new Set),n.invalidateQueries({queryKey:[`library-trash`]}),n.invalidateQueries({queryKey:[`library-trash-count`]}),n.invalidateQueries({queryKey:[`library-files`]}),n.invalidateQueries({queryKey:[`library-folders`]})},onError:t=>r(t.message||e(`libraryTrash.toast.restoreFailed`),`error`)}),x=q({mutationFn:e=>Promise.all(e.map(e=>Z.hardDeleteLibraryTrash(e))),onSuccess:(t,i)=>{r(e(`libraryTrash.toast.bulkPurged`,{count:i.length}),`success`),l(new Set),n.invalidateQueries({queryKey:[`library-trash`]}),n.invalidateQueries({queryKey:[`library-trash-count`]})},onError:t=>r(t.message||e(`libraryTrash.toast.purgeFailed`),`error`)}),S=(0,y.useMemo)(()=>d.data?.items??[],[d.data?.items]),C=d.data?.retention_days??30,w=(0,y.useMemo)(()=>S.reduce((e,t)=>e+t.file_size,0),[S]),T=S.length>0&&S.every(e=>c.has(e.id)),E=c.size>0&&!T,D=e=>{l(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})};return(0,G.jsxs)(`div`,{className:`p-6 max-w-screen-2xl mx-auto`,children:[(0,G.jsx)(`div`,{className:`flex items-center gap-3 mb-4`,children:(0,G.jsxs)(Ai,{to:`/files`,className:`inline-flex items-center gap-1 text-sm text-gray-600 dark:text-gray-400 hover:text-gray-900 dark:hover:text-gray-200`,children:[(0,G.jsx)(Lo,{className:`w-4 h-4`}),` `,e(`libraryTrash.backToFiles`)]})}),(0,G.jsxs)(`div`,{className:`flex items-start justify-between mb-6 gap-4 flex-wrap`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h1`,{className:`text-2xl font-bold text-gray-900 dark:text-gray-100`,children:e(`libraryTrash.title`)}),(0,G.jsx)(`p`,{className:`text-sm text-gray-600 dark:text-gray-400 mt-1`,children:e(u?`libraryTrash.subtitleAdmin`:`libraryTrash.subtitleUser`,{days:C})})]}),S.length>0&&(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>s({type:`empty`}),className:`text-red-600 dark:text-red-400`,children:[(0,G.jsx)(Nu,{className:`w-4 h-4 mr-1`}),e(`libraryTrash.emptyTrash`)]})]}),u&&f.data&&(0,G.jsxs)(`div`,{className:`mb-4 border border-gray-200 dark:border-gray-700 rounded-lg p-3 flex items-center gap-3 bg-gray-50 dark:bg-gray-800/40`,children:[(0,G.jsx)(`label`,{htmlFor:`retention-days`,className:`text-sm font-medium text-gray-700 dark:text-gray-300`,children:e(`libraryTrash.retentionLabel`)}),(0,G.jsx)(`input`,{id:`retention-days`,type:`number`,min:1,max:365,value:p??f.data.retention_days,onChange:e=>m(Math.max(1,Math.min(365,parseInt(e.target.value||`0`,10)||0))),className:`w-20 rounded border border-gray-300 dark:border-gray-600 bg-white dark:bg-gray-800 text-sm px-2 py-1 text-gray-900 dark:text-gray-100`}),(0,G.jsx)(`span`,{className:`text-sm text-gray-600 dark:text-gray-400`,children:e(`libraryTrash.days`)}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>p!=null&&h.mutate(p),disabled:h.isPending||p==null||p===f.data.retention_days,className:`ml-auto`,children:[(0,G.jsx)(Kl,{className:`w-4 h-4 mr-1`}),e(`common.save`)]})]}),d.isLoading?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-gray-500 dark:text-gray-400`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),` `,e(`libraryTrash.loading`)]}):S.length===0?(0,G.jsx)(`div`,{className:`border border-dashed border-gray-300 dark:border-gray-700 rounded-lg p-12 text-center`,children:(0,G.jsx)(`p`,{className:`text-gray-500 dark:text-gray-400`,children:e(`libraryTrash.empty`)})}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsx)(`div`,{className:`text-xs text-gray-500 dark:text-gray-400`,children:e(`libraryTrash.summary`,{count:S.length,size:Ud(w)})}),c.size>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-sm`,children:[(0,G.jsx)(`span`,{className:`text-gray-600 dark:text-gray-400`,children:e(`libraryTrash.selectionCount`,{count:c.size})}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>b.mutate(Array.from(c)),disabled:b.isPending,children:[(0,G.jsx)(Ul,{className:`w-4 h-4 mr-1`}),e(`libraryTrash.bulkRestore`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>s({type:`bulkDelete`,count:c.size}),disabled:x.isPending,className:`text-red-600 dark:text-red-400`,children:[(0,G.jsx)(Nu,{className:`w-4 h-4 mr-1`}),e(`libraryTrash.bulkPurge`)]})]})]}),(0,G.jsx)(`div`,{className:`border border-gray-200 dark:border-gray-700 rounded-lg overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{className:`bg-gray-50 dark:bg-gray-800 text-left text-gray-600 dark:text-gray-300`,children:(0,G.jsxs)(`tr`,{children:[(0,G.jsx)(`th`,{className:`px-3 py-2 w-10`,children:(0,G.jsx)(`input`,{type:`checkbox`,checked:T,ref:e=>{e&&(e.indeterminate=E)},onChange:()=>{l(e=>e.size===S.length?new Set:new Set(S.map(e=>e.id)))},"aria-label":e(`libraryTrash.selectAll`),className:`rounded border-gray-300 cursor-pointer`})}),(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium`,children:e(`libraryTrash.col.filename`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium`,children:e(`libraryTrash.col.folder`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium text-right`,children:e(`libraryTrash.col.size`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium whitespace-nowrap`,children:e(`libraryTrash.col.deleted`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium whitespace-nowrap`,children:e(`libraryTrash.col.autoPurge`)}),u&&(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium`,children:e(`libraryTrash.col.owner`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium text-right`,children:e(`libraryTrash.col.actions`)})]})}),(0,G.jsx)(`tbody`,{className:`divide-y divide-gray-100 dark:divide-gray-800`,children:S.map(t=>(0,G.jsxs)(`tr`,{className:`hover:bg-gray-50 dark:hover:bg-gray-800/50`,children:[(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsx)(`input`,{type:`checkbox`,checked:c.has(t.id),onChange:()=>D(t.id),"aria-label":e(`libraryTrash.selectOne`,{filename:t.filename}),className:`rounded border-gray-300 cursor-pointer`})}),(0,G.jsx)(`td`,{className:`px-3 py-2 text-gray-900 dark:text-gray-100 truncate max-w-md`,title:t.filename,children:t.filename}),(0,G.jsx)(`td`,{className:`px-3 py-2 text-gray-600 dark:text-gray-400`,children:t.folder_name??`—`}),(0,G.jsx)(`td`,{className:`px-3 py-2 text-right text-gray-600 dark:text-gray-400 tabular-nums whitespace-nowrap`,children:Ud(t.file_size)}),(0,G.jsx)(`td`,{className:`px-3 py-2 text-gray-600 dark:text-gray-400 whitespace-nowrap`,children:w$e(t.deleted_at)}),(0,G.jsx)(`td`,{className:`px-3 py-2 text-gray-600 dark:text-gray-400 whitespace-nowrap`,children:(0,G.jsx)(`span`,{title:w$e(t.auto_purge_at),children:e(`libraryTrash.autoPurgeIn`,{when:C$e(t.auto_purge_at)})})}),u&&(0,G.jsx)(`td`,{className:`px-3 py-2 text-gray-600 dark:text-gray-400`,children:t.created_by_username??`—`}),(0,G.jsxs)(`td`,{className:`px-3 py-2 text-right whitespace-nowrap`,children:[(0,G.jsxs)(`button`,{onClick:()=>g.mutate(t.id),disabled:g.isPending,className:`inline-flex items-center gap-1 px-2 py-1 text-xs text-blue-600 hover:text-blue-800 dark:text-blue-400 dark:hover:text-blue-300`,children:[(0,G.jsx)(Ul,{className:`w-3.5 h-3.5`}),e(`libraryTrash.restore`)]}),(0,G.jsxs)(`button`,{onClick:()=>s({type:`delete`,id:t.id,filename:t.filename}),disabled:_.isPending,className:`inline-flex items-center gap-1 px-2 py-1 text-xs text-red-600 hover:text-red-800 dark:text-red-400 dark:hover:text-red-300 ml-2`,children:[(0,G.jsx)(Nu,{className:`w-3.5 h-3.5`}),e(`libraryTrash.purgeNow`)]})]})]},t.id))})]})})]}),o&&(0,G.jsx)(rf,{onCancel:()=>s(null),onConfirm:()=>{o&&(o.type===`delete`?_.mutate(o.id):o.type===`bulkDelete`?x.mutate(Array.from(c)):v.mutate(),s(null))},title:o.type===`delete`?e(`libraryTrash.confirm.purgeTitle`):o.type===`bulkDelete`?e(`libraryTrash.confirm.bulkPurgeTitle`):e(`libraryTrash.confirm.emptyTitle`),message:o.type===`delete`?e(`libraryTrash.confirm.purgeBody`,{filename:o.filename}):o.type===`bulkDelete`?e(`libraryTrash.confirm.bulkPurgeBody`,{count:o.count}):e(`libraryTrash.confirm.emptyBody`,{count:S.length}),confirmText:e(`libraryTrash.confirm.cta`),variant:`danger`}),d.isError&&(0,G.jsxs)(`div`,{className:`mt-4 text-sm text-red-600 dark:text-red-400`,children:[d.error?.message??e(`libraryTrash.loadError`),(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>t(`/files`),className:`ml-3`,children:e(`libraryTrash.backToFiles`)})]})]})}function E$e(e){return e.includes(`/camera/`)}function D$e(e,t,n){let r=0;return e.querySelectorAll(`img[src*="/api/v1/"], video[src*="/api/v1/"]`).forEach(e=>{let i=e.getAttribute(`src`)||``,a=E$e(i)?n:t;if(!a)return;let o=`token=${encodeURIComponent(a)}`;if(i.includes(o))return;let s=i.replace(/([?&])token=[^&]*(&|$)/,(e,t,n)=>n===`&`?t:``);e.src=`${s}${s.includes(`?`)?`&`:`?`}${o}`,r+=1}),r}function O$e(){let{authEnabled:e,user:t,loading:n,hasPermission:r}=jd(),i=co(),a=(0,y.useRef)(!1),o=!n&&(!e||t!==null),{data:s}=K({queryKey:[`media-token`,t?.id??null],queryFn:()=>Z.getMediaToken(),enabled:o,staleTime:3e3*1e3,refetchInterval:3e3*1e3}),c=!e||r(`camera:view`),{data:l}=K({queryKey:[`camera-stream-token`,t?.id??null],queryFn:()=>Z.getCameraStreamToken(),enabled:o&&c,staleTime:3e3*1e3,refetchInterval:3e3*1e3}),u=s?.token??null,d=l?.token??null;(0,y.useEffect)(()=>(md(u),fd(d),(u||d)&&D$e(document,u,d),()=>{md(null),fd(null)}),[u,d]),(0,y.useEffect)(()=>{if(!e)return;let t=e=>{let t=e.target;if(!(t instanceof HTMLImageElement||t instanceof HTMLVideoElement))return;let n=t.src||``,r=E$e(n),o=r?pd():hd();!o||!n.includes(`token=${encodeURIComponent(o)}`)||a.current||(a.current=!0,i.invalidateQueries({queryKey:r?[`camera-stream-token`]:[`media-token`]}),setTimeout(()=>{a.current=!1},5e3))};return document.addEventListener(`error`,t,!0),()=>document.removeEventListener(`error`,t,!0)},[e,i])}var a9=5,k$e=2e3,A$e=3e4,j$e=5e3;function M$e(){let{t:e}=U(),t=co(),{showToast:n}=Gd(),{hasPermission:r,authEnabled:i,user:a}=jd(),{printerId:o}=dr(),s=parseInt(o||`0`,10),[c]=Ri(),l=parseInt(c.get(`fps`)||`15`,10),u=Math.min(Math.max(isNaN(l)?15:l,1),30);O$e();let{data:d,isPending:f}=K({queryKey:[`camera-stream-token`,a?.id??null],queryFn:()=>Z.getCameraStreamToken(),enabled:i?!!a:!0,staleTime:3e3*1e3}),p=d?.token??pd(),[m,h]=(0,y.useState)(`stream`),[g,_]=(0,y.useState)(!1),[v,b]=(0,y.useState)(!1),[x,S]=(0,y.useState)(!1),[C,w]=(0,y.useState)(!0),[T,E]=(0,y.useState)(Date.now()),[D,O]=(0,y.useState)(!1),[k,A]=(0,y.useState)(!1),[j,M]=(0,y.useState)(0),[N,P]=(0,y.useState)(!1),[F,I]=(0,y.useState)(0),[L,R]=(0,y.useState)(1),[z,B]=(0,y.useState)({x:0,y:0}),[V,ee]=(0,y.useState)(!1),[te,ne]=(0,y.useState)({x:0,y:0}),[re,ie]=(0,y.useState)(null),[ae,oe]=(0,y.useState)(null),se=(0,y.useRef)(null),H=(0,y.useRef)(null),ce=(0,y.useRef)(null),le=(0,y.useRef)(null),ue=(0,y.useRef)(null),de=(0,y.useRef)(0),{data:fe}=K({queryKey:[`printer`,s],queryFn:()=>Z.getPrinter(s),enabled:s>0}),{data:pe}=K({queryKey:[`printerStatus`,s],queryFn:()=>Z.getPrinterStatus(s),refetchInterval:3e4,enabled:s>0}),me=q({mutationFn:e=>Z.setChamberLight(s,e),onMutate:async e=>{await t.cancelQueries({queryKey:[`printerStatus`,s]});let n=t.getQueryData([`printerStatus`,s]);return t.setQueryData([`printerStatus`,s],t=>({...t,chamber_light:e})),{previousStatus:n}},onSuccess:(e,t)=>{n(`Chamber light ${t?`on`:`off`}`)},onError:(r,i,a)=>{a?.previousStatus&&t.setQueryData([`printerStatus`,s],a.previousStatus),n(r.message||e(`printers.toast.failedToControlChamberLight`),`error`)}}),he=(pe?.state===`RUNNING`||pe?.state===`PAUSE`)&&(pe?.printable_objects_count??0)>=2;(0,y.useEffect)(()=>(fe&&(document.title=`${fe.name} - Camera`),()=>{document.title=`Bambuddy`}),[fe]);let ge=(0,y.useRef)(!1);(0,y.useEffect)(()=>{let e=`/api/v1/printers/${s}/camera/stop`;ge.current=!1;let t=()=>{if(s>0&&!ge.current){ge.current=!0;let t={},n=ld();n&&(t.Authorization=`Bearer ${n}`),fetch(e,{method:`POST`,keepalive:!0,headers:t}).catch(()=>{})}},n=()=>{t()};window.addEventListener(`beforeunload`,n);let r=se.current;return()=>{window.removeEventListener(`beforeunload`,n),r&&(r.src=``),t()}},[s]),(0,y.useEffect)(()=>{if(C&&!D){let e=setTimeout(()=>{w(!1)},m===`stream`?3e3:2e4);return()=>clearTimeout(e)}},[m,C,T,D]),(0,y.useEffect)(()=>{let e=()=>{A(!!document.fullscreenElement),R(1),B({x:0,y:0}),m===`stream`&&!D&&(se.current&&(se.current.src=``),setTimeout(()=>{w(!0),E(Date.now())},200))};return document.addEventListener(`fullscreenchange`,e),()=>document.removeEventListener(`fullscreenchange`,e)},[m,D]),(0,y.useEffect)(()=>{let e,t=()=>{clearTimeout(e),e=setTimeout(()=>{localStorage.setItem(`cameraWindowState`,JSON.stringify({width:window.outerWidth,height:window.outerHeight,left:window.screenX,top:window.screenY}))},500)};return window.addEventListener(`resize`,t),()=>{clearTimeout(e),window.removeEventListener(`resize`,t)}},[]),(0,y.useEffect)(()=>()=>{ce.current&&clearTimeout(ce.current),le.current&&clearInterval(le.current),ue.current&&clearInterval(ue.current)},[]);let _e=(0,y.useCallback)(()=>{if(j>=a9){P(!1),S(!0);return}let e=Math.min(k$e*2**j,A$e);P(!0),I(Math.ceil(e/1e3)),le.current=setInterval(()=>{I(e=>e<=1?(le.current&&clearInterval(le.current),0):e-1)},1e3),ce.current=setTimeout(()=>{M(e=>e+1),P(!1),w(!0),S(!1),se.current&&(se.current.src=``),E(Date.now())},e)},[j]);(0,y.useEffect)(()=>{if(m!==`stream`||C||N||D){ue.current&&=(clearInterval(ue.current),null);return}return de.current=0,ue.current=setInterval(async()=>{try{let e=await Z.getCameraStatus(s);if(!(e.stalled||!e.active&&!x)){de.current=0;return}if(de.current+=1,de.current<2)return;de.current=0,console.log(`Stream issue detected: stalled=${e.stalled}, active=${e.active}, reconnecting...`),ue.current&&=(clearInterval(ue.current),null),w(!1),_e()}catch{}},j$e),()=>{ue.current&&=(clearInterval(ue.current),null)}},[m,C,x,N,D,s,_e]);let ve=()=>{w(!1),m===`stream`&&j<a9?_e():S(!0)},ye=()=>{if(w(!1),S(!1),M(0),de.current=0,P(!1),ce.current&&clearTimeout(ce.current),le.current&&clearInterval(le.current),se.current&&!localStorage.getItem(`cameraWindowState`)){let e=se.current,t=e.naturalWidth,n=e.naturalHeight;if(t>0&&n>0){let e=window.outerWidth-window.innerWidth,r=window.outerHeight-window.innerHeight,i=t+16+e,a=n+45+16+r;try{window.resizeTo(i,a)}catch{}}}},be=()=>{if(s>0){let e={},t=ld();t&&(e.Authorization=`Bearer ${t}`),fetch(`/api/v1/printers/${s}/camera/stop`,{method:`POST`,headers:e}).catch(()=>{})}},xe=e=>{m===e||D||(O(!0),w(!0),S(!1),M(0),P(!1),R(1),B({x:0,y:0}),ce.current&&clearTimeout(ce.current),le.current&&clearInterval(le.current),se.current&&(se.current.src=``),m===`stream`&&be(),setTimeout(()=>{h(e),E(Date.now()),O(!1)},100))},Se=()=>{D||(O(!0),w(!0),S(!1),M(0),P(!1),ce.current&&clearTimeout(ce.current),le.current&&clearInterval(le.current),se.current&&(se.current.src=``),m===`stream`&&be(),setTimeout(()=>{E(Date.now()),O(!1)},100))},Ce=()=>{H.current&&(document.fullscreenElement?document.exitFullscreen():H.current.requestFullscreen())},we=()=>{R(e=>Math.min(e+.5,4))},Te=()=>{R(e=>{let t=Math.max(e-.5,1);return t===1&&B({x:0,y:0}),t})},Ee=e=>{e.preventDefault(),e.deltaY<0?we():Te()},De=e=>{L>1&&(e.preventDefault(),ee(!0),ne({x:e.clientX-z.x,y:e.clientY-z.y}))},Oe=(0,y.useCallback)(()=>{if(!H.current)return{x:300,y:200};let e=H.current.getBoundingClientRect(),t=e.width*(L-1)/2,n=e.height*(L-1)/2;return{x:Math.max(50,t),y:Math.max(50,n)}},[L]),ke=e=>{if(V&&L>1){let t=e.clientX-te.x,n=e.clientY-te.y,r=Oe();B({x:Math.max(-r.x,Math.min(r.x,t)),y:Math.max(-r.y,Math.min(r.y,n))})}},Ae=()=>{ee(!1)},je=e=>{if(e.length<2)return 0;let t=e[0].clientX-e[1].clientX,n=e[0].clientY-e[1].clientY;return Math.sqrt(t*t+n*n)},Me=e=>e.length<2?{x:e[0].clientX,y:e[0].clientY}:{x:(e[0].clientX+e[1].clientX)/2,y:(e[0].clientY+e[1].clientY)/2},Ne=e=>{e.touches.length===2?(e.preventDefault(),ie(je(e.touches)),oe(Me(e.touches))):e.touches.length===1&&L>1&&(e.preventDefault(),ee(!0),ne({x:e.touches[0].clientX-z.x,y:e.touches[0].clientY-z.y}))},Pe=e=>{if(e.touches.length===2&&re!==null){e.preventDefault();let t=je(e.touches),n=t/re;R(e=>{let t=Math.max(1,Math.min(4,e*n));return t===1&&B({x:0,y:0}),t}),ie(t);let r=Me(e.touches);if(ae){let e=Oe();B(t=>({x:Math.max(-e.x,Math.min(e.x,t.x+(r.x-ae.x))),y:Math.max(-e.y,Math.min(e.y,t.y+(r.y-ae.y)))}))}oe(r)}else if(e.touches.length===1&&V&&L>1){e.preventDefault();let t=e.touches[0].clientX-te.x,n=e.touches[0].clientY-te.y,r=Oe();B({x:Math.max(-r.x,Math.min(r.x,t)),y:Math.max(-r.y,Math.min(r.y,n))})}},Fe=e=>{e.touches.length<2&&(ie(null),oe(null)),e.touches.length===0&&ee(!1)},Ie=()=>{R(1),B({x:0,y:0})},Le=D||!p&&(i||f)?``:(e=>p?`${e}&token=${encodeURIComponent(p)}`:gd(e))(m===`stream`?`/api/v1/printers/${s}/camera/stream?fps=${u}&t=${T}`:`/api/v1/printers/${s}/camera/snapshot?t=${T}`),Re=C||D||N;return s?(0,G.jsxs)(`div`,{ref:H,className:`min-h-screen bg-black flex flex-col`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-4 py-2 bg-bambu-dark-secondary border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`h1`,{className:`text-sm font-medium text-white flex items-center gap-2`,children:[(0,G.jsx)(ss,{className:`w-4 h-4`}),fe?.name||`Printer ${s}`]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex bg-bambu-dark rounded p-0.5`,children:[(0,G.jsx)(`button`,{onClick:()=>xe(`stream`),disabled:Re,className:`px-3 py-1 text-xs rounded transition-colors ${m===`stream`?`bg-bambu-green text-white`:`text-bambu-gray hover:text-white disabled:opacity-50`}`,children:e(`camera.live`)}),(0,G.jsx)(`button`,{onClick:()=>xe(`snapshot`),disabled:Re,className:`px-3 py-1 text-xs rounded transition-colors ${m===`snapshot`?`bg-bambu-green text-white`:`text-bambu-gray hover:text-white disabled:opacity-50`}`,children:e(`camera.snapshot`)})]}),(0,G.jsx)(`button`,{onClick:()=>me.mutate(!pe?.chamber_light),disabled:!pe?.connected||me.isPending||!r(`printers:control`),className:`p-1.5 rounded disabled:opacity-50 ${pe?.chamber_light?`bg-yellow-500/20 hover:bg-yellow-500/30`:`hover:bg-bambu-dark-tertiary`}`,title:r(`printers:control`)?e(`camera.chamberLight`):e(`printers.permission.noControl`),children:(0,G.jsx)(wT,{on:pe?.chamber_light??!1,className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>_(!0),disabled:!he||!r(`printers:control`),className:`p-1.5 rounded disabled:opacity-50 ${he&&r(`printers:control`)?`hover:bg-bambu-dark-tertiary`:``}`,title:r(`printers:control`)?e(he?`printers.skipObjects.tooltip`:`printers.skipObjects.onlyWhilePrinting`):e(`printers.permission.noControl`),children:(0,G.jsx)(TT,{className:`w-4 h-4 text-bambu-gray`})}),(0,G.jsx)(`button`,{onClick:Se,disabled:Re,className:`p-1.5 hover:bg-bambu-dark-tertiary rounded disabled:opacity-50`,title:e(m===`stream`?`camera.restartStream`:`camera.refreshSnapshot`),children:(0,G.jsx)(Vl,{className:`w-4 h-4 text-bambu-gray ${Re?`animate-spin`:``}`})}),(0,G.jsx)(`button`,{onClick:()=>b(!0),className:`p-1.5 hover:bg-bambu-dark-tertiary rounded`,title:e(`camera.diagnose.button`),children:(0,G.jsx)(xu,{className:`w-4 h-4 text-bambu-gray`})}),(0,G.jsx)(`button`,{onClick:Ce,className:`p-1.5 hover:bg-bambu-dark-tertiary rounded`,title:e(k?`camera.exitFullscreen`:`camera.fullscreen`),children:k?(0,G.jsx)(fl,{className:`w-4 h-4 text-bambu-gray`}):(0,G.jsx)(cl,{className:`w-4 h-4 text-bambu-gray`})})]})]}),(0,G.jsx)(`div`,{className:`flex-1 flex items-center justify-center p-2 overflow-hidden`,onWheel:Ee,onMouseMove:ke,onMouseUp:Ae,onMouseLeave:Ae,onTouchStart:Ne,onTouchMove:Pe,onTouchEnd:Fe,style:{touchAction:`none`},children:(0,G.jsxs)(`div`,{className:`relative w-full h-full flex items-center justify-center`,children:[(C||D)&&!N&&(0,G.jsx)(`div`,{className:`absolute inset-0 flex items-center justify-center bg-black/50 z-10`,children:(0,G.jsxs)(`div`,{className:`text-center`,children:[(0,G.jsx)(Vl,{className:`w-8 h-8 text-bambu-gray animate-spin mx-auto mb-2`}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(m===`stream`?`camera.connectingToCamera`:`camera.capturingSnapshot`)})]})}),N&&(0,G.jsx)(`div`,{className:`absolute inset-0 flex items-center justify-center bg-black/80 z-10`,children:(0,G.jsxs)(`div`,{className:`text-center p-4`,children:[(0,G.jsx)(Xu,{className:`w-10 h-10 text-orange-400 mx-auto mb-3`}),(0,G.jsx)(`p`,{className:`text-white mb-2`,children:e(`camera.connectionLost`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-3`,children:e(`camera.reconnecting`,{countdown:F,attempt:Math.min(j+1,a9),max:a9})}),(0,G.jsx)(`button`,{onClick:Se,className:`px-4 py-2 bg-bambu-green text-white text-sm rounded hover:bg-bambu-green/80 transition-colors`,children:e(`camera.reconnectNow`)})]})}),x&&!N&&(0,G.jsx)(`div`,{className:`absolute inset-0 flex items-center justify-center bg-black z-10`,children:(0,G.jsxs)(`div`,{className:`text-center p-4`,children:[(0,G.jsx)(Iu,{className:`w-12 h-12 text-orange-400 mx-auto mb-3`}),(0,G.jsx)(`p`,{className:`text-white mb-2`,children:e(`camera.cameraUnavailable`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-4 max-w-md`,children:e(`camera.cameraUnavailableDesc`)}),(0,G.jsxs)(`div`,{className:`flex gap-2 justify-center`,children:[(0,G.jsx)(`button`,{onClick:Se,className:`px-4 py-2 bg-bambu-green text-white rounded hover:bg-bambu-green/80 transition-colors`,children:e(`camera.retry`)}),(0,G.jsx)(`button`,{onClick:()=>b(!0),className:`px-4 py-2 bg-bambu-dark border border-bambu-dark-tertiary text-bambu-gray hover:text-white rounded transition-colors`,children:e(`camera.diagnose.button`)})]})]})}),(0,G.jsx)(`img`,{ref:se,src:Le,alt:e(`camera.cameraStream`),className:`max-w-full max-h-full object-contain select-none`,style:{transform:`scale(${L}) translate(${z.x/L}px, ${z.y/L}px) rotate(${fe?.camera_rotation||0}deg)`,...fe?.camera_rotation===90||fe?.camera_rotation===270?{maxWidth:`100vh`,maxHeight:`100vw`}:{},cursor:L>1?V?`grabbing`:`grab`:`default`},onError:Le?ve:void 0,onLoad:Le?ye:void 0,onMouseDown:De,draggable:!1},T),(0,G.jsxs)(`div`,{className:`absolute bottom-4 left-4 flex items-center gap-1.5 bg-black/60 rounded-lg px-2 py-1.5`,children:[(0,G.jsx)(`button`,{onClick:Te,disabled:L<=1,className:`p-1.5 hover:bg-white/10 rounded disabled:opacity-30`,title:e(`camera.zoomOut`),children:(0,G.jsx)(id,{className:`w-4 h-4 text-white`})}),(0,G.jsxs)(`button`,{onClick:Ie,className:`px-2 py-1 text-sm text-white hover:bg-white/10 rounded min-w-[48px]`,title:e(`camera.resetZoom`),children:[Math.round(L*100),`%`]}),(0,G.jsx)(`button`,{onClick:we,disabled:L>=4,className:`p-1.5 hover:bg-white/10 rounded disabled:opacity-30`,title:e(`camera.zoomIn`),children:(0,G.jsx)(nd,{className:`w-4 h-4 text-white`})})]})]})}),(0,G.jsx)(ET,{printerId:s,isOpen:g,onClose:()=>_(!1)}),v&&(0,G.jsx)(DT,{printerId:s,printerName:fe?.name||null,onClose:()=>b(!1)})]}):(0,G.jsx)(`div`,{className:`min-h-screen bg-black flex items-center justify-center`,children:(0,G.jsx)(`p`,{className:`text-white`,children:e(`camera.invalidPrinterId`)})})}var N$e=5e3,P$e=4,F$e=8,I$e=1,L$e=16,R$e=2,z$e=60;function B$e(e,t,n,r){let i=parseInt(e??``,10);return Number.isFinite(i)?Math.min(r,Math.max(n,i)):t}function V$e(e,t,n,r,i,a){return e.has(t)?B$e(e.get(t),r,i,a):B$e(localStorage.getItem(n),r,i,a)}function H$e(){let{t:e}=U(),t=rr(),{authEnabled:n,loading:r,user:i}=jd(),[a]=Ri(),o=a.get(`token`),s=o!=null&&o!==``,[c,l]=(0,y.useState)(()=>V$e(a,`maxLive`,`camWallMaxLive`,P$e,I$e,L$e)),[u,d]=(0,y.useState)(()=>V$e(a,`interval`,`camWallSnapshotSec`,F$e,R$e,z$e)),[f,p]=(0,y.useState)(()=>{let e=a.get(`status`)??localStorage.getItem(`camWallStatusMode`);return(s?[`off`,`compact`]:[`off`,`compact`,`full`]).includes(e)?e:`compact`});(0,y.useEffect)(()=>{if(s)return fd(o),()=>fd(null)},[s,o]);let m=K({queryKey:[`camwall-printers`,o],queryFn:()=>Z.getCamWallPrinters(o??void 0),enabled:s,refetchInterval:N$e}),h=K({queryKey:[`printers`],queryFn:()=>Z.getPrinters(),enabled:!s&&!r&&(!n||i!==null),refetchInterval:N$e}),g=(0,y.useMemo)(()=>{let e=new Map;for(let t of m.data??[])e.set(t.id,{connected:t.connected,state:t.state,progress:t.progress,remaining_time:t.remaining_time,layer_num:t.layer_num,total_layers:t.total_layers,hms_errors:t.hms_errors});return e},[m.data]);if(!s&&r)return(0,G.jsx)(`div`,{className:`flex min-h-screen items-center justify-center bg-bambu-dark text-bambu-gray`,children:e(`common.loading`)});if(!s&&n&&!i)return(0,G.jsx)(Fr,{to:`/login`,replace:!0,state:{from:t}});let _=s?m:h,v=s?m.data??[]:h.data??[];return _.isError?(0,G.jsx)(`div`,{className:`flex min-h-screen items-center justify-center bg-bambu-dark p-6 text-center`,children:(0,G.jsx)(`p`,{className:`max-w-md text-sm text-red-400`,children:e(s?`printers.camWall.page.tokenRejected`:`printers.camWall.page.loadFailed`)})}):(0,G.jsx)(`div`,{className:`min-h-screen bg-bambu-dark p-4`,children:(0,G.jsx)(PT,{printers:v,maxLive:c,snapshotIntervalSec:u,statusMode:f,statuses:s?g:void 0,showSettings:!s,onTileClick:s?void 0:e=>window.open(`/camera/${e}`,`camera-${e}`),onChangeMaxLive:e=>{l(e),localStorage.setItem(`camWallMaxLive`,String(e))},onChangeSnapshotIntervalSec:e=>{d(e),localStorage.setItem(`camWallSnapshotSec`,String(e))},onChangeStatusMode:e=>{p(e),localStorage.setItem(`camWallStatusMode`,e)}})})}function U$e(e,t,n){if(!e)return``;if(!t)return e;let r=t.match(/plate_(\d+)\.gcode/);return r&&parseInt(r[1],10)>1?`${e} — ${n(`printers.plateNumber`,`Plate {{number}}`,{number:r[1]})}`:e}function W$e(e){let t=e.get(`show`)?.split(`,`)||[`progress`,`layers`,`eta`,`filename`,`status`],n=parseInt(e.get(`fps`)||`15`,10),r=Math.min(Math.max(isNaN(n)?15:n,1),30),i=e.get(`camera`),a=i!==`false`&&i!==`0`;return{size:e.get(`size`)||`medium`,fps:r,showCamera:a,showProgress:t.includes(`progress`),showLayers:t.includes(`layers`),showEta:t.includes(`eta`),showFilename:t.includes(`filename`),showStatus:t.includes(`status`),showPrinter:t.includes(`printer`),showNozzle:t.includes(`nozzle`),showBed:t.includes(`bed`),showChamber:t.includes(`chamber`)}}function G$e(e,t){if(e.stg_cur_name)return e.stg_cur_name;switch(e.state){case`RUNNING`:return t(`streamOverlay.status.printing`);case`PAUSE`:return t(`streamOverlay.status.paused`);case`FINISH`:return t(`streamOverlay.status.finished`);case`FAILED`:return t(`streamOverlay.status.failed`);case`IDLE`:return t(`streamOverlay.status.idle`);default:return e.state||t(`streamOverlay.status.unknown`)}}function o9(e,t){let n=e[t];return typeof n==`number`?n:null}function K$e({icon:e,label:t,current:n,target:r,sizes:i}){let a=r!=null&&r>0&&Math.round(r)!==Math.round(n);return(0,G.jsxs)(`div`,{className:`flex items-center ${i.gap} text-white/70`,children:[e,(0,G.jsxs)(`span`,{className:i.text,children:[(0,G.jsx)(`span`,{className:`mr-1`,children:t}),(0,G.jsxs)(`span`,{className:`text-white`,children:[Math.round(n),`°C`]}),a&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{className:`mx-1`,children:`/`}),(0,G.jsxs)(`span`,{children:[Math.round(r),`°C`]})]})]})]})}function q$e(e){switch(e){case`small`:return{container:`p-3`,text:`text-sm`,textLarge:`text-lg`,progressHeight:`h-2`,icon:`w-3 h-3`,gap:`gap-2`,logoHeight:`h-12`};case`large`:return{container:`p-6`,text:`text-xl`,textLarge:`text-3xl`,progressHeight:`h-4`,icon:`w-6 h-6`,gap:`gap-4`,logoHeight:`h-24`};default:return{container:`p-4`,text:`text-base`,textLarge:`text-xl`,progressHeight:`h-3`,icon:`w-4 h-4`,gap:`gap-3`,logoHeight:`h-16`}}}function J$e(){let{printerId:e}=dr(),[t]=Ri(),{t:n}=U(),r=co(),i=parseInt(e||`0`,10),[a,o]=(0,y.useState)(Date.now()),s=(0,y.useMemo)(()=>W$e(t),[t]),c=q$e(s.size),l=t.get(`token`),u=l!=null&&l!==``,{data:d}=K({queryKey:[`overlayStatus`,i,l],queryFn:()=>Z.getOverlayStatus(i,l??void 0),enabled:i>0&&u,refetchInterval:2e3}),{data:f}=K({queryKey:[`printer`,i],queryFn:()=>Z.getPrinter(i),enabled:i>0&&!u}),{data:p}=K({queryKey:[`printerStatus`,i],queryFn:()=>Z.getPrinterStatus(i),enabled:i>0&&!u,refetchInterval:2e3}),{data:m}=K({queryKey:[`settings`],queryFn:Z.getSettings,enabled:!u}),h=(0,y.useMemo)(()=>u?d&&{name:d.name,camera_rotation:d.camera_rotation}:f,[u,d,f]),g=u?d:p,_=(u?d?.time_format:m?.time_format)||`system`;(0,y.useEffect)(()=>{if(!i||u)return;let e=null,t=!1;return(async()=>{let n;try{n=(await Z.getWebSocketToken()).token}catch(e){let t=e instanceof od?e.status:0;if(t===401||t===403)return}if(t)return;let a=window.location.protocol===`https:`?`wss:`:`ws:`,o=n?`?token=${encodeURIComponent(n)}`:``,s=`${a}//${window.location.host}/api/v1/ws${o}`;e=new WebSocket(s),e.onmessage=e=>{try{let t=JSON.parse(e.data);t.type===`printer_status`&&t.printer_id===i&&r.setQueryData([`printerStatus`,i],t.status)}catch{}},e.onerror=()=>{}})(),()=>{t=!0,e&&e.close()}},[i,u,r]),(0,y.useEffect)(()=>(document.title=h?`${h.name} - ${n(`streamOverlay.title`)}`:n(`streamOverlay.title`),()=>{document.title=`Bambuddy`}),[h,n]);let v=()=>{setTimeout(()=>{o(Date.now())},3e3)};if(!i)return(0,G.jsx)(`div`,{className:`min-h-screen bg-black flex items-center justify-center`,children:(0,G.jsx)(`p`,{className:`text-white`,children:n(`streamOverlay.invalidPrinterId`)})});if(!g)return(0,G.jsx)(`div`,{className:`min-h-screen bg-black flex items-center justify-center`,children:(0,G.jsx)(`p`,{className:`text-gray-400`,children:n(`common.loading`)})});let b=g.state===`RUNNING`||g.state===`PAUSE`,x=g.progress||0,S=g.temperatures??{},C=[];if(s.showNozzle){let e=o9(S,`nozzle`),t=o9(S,`nozzle_2`);e!=null&&C.push({key:`nozzle`,icon:(0,G.jsx)(mc,{className:c.icon}),label:n(`printers.heaterHistory.nozzle`,`Nozzle`),current:e,target:o9(S,`nozzle_target`)}),t!=null&&C.push({key:`nozzle_2`,icon:(0,G.jsx)(mc,{className:c.icon}),label:n(`printers.heaterHistory.nozzle2`,`Nozzle 2`),current:t,target:o9(S,`nozzle_2_target`)})}if(s.showBed){let e=o9(S,`bed`);e!=null&&C.push({key:`bed`,icon:(0,G.jsx)(yu,{className:c.icon}),label:n(`printers.heaterHistory.bed`,`Bed`),current:e,target:o9(S,`bed_target`)})}if(s.showChamber){let e=o9(S,`chamber`);e!=null&&C.push({key:`chamber`,icon:(0,G.jsx)(Zo,{className:c.icon}),label:n(`printers.heaterHistory.chamber`,`Chamber`),current:e,target:o9(S,`chamber_target`)})}let w=`/api/v1/printers/${i}/camera/stream?fps=${s.fps}&t=${a}`,T=u&&l?`${w}&token=${encodeURIComponent(l)}`:gd(w);return(0,G.jsxs)(`div`,{className:`min-h-screen bg-black relative overflow-hidden`,children:[s.showCamera&&(0,G.jsx)(`img`,{src:T,alt:n(`streamOverlay.cameraStream`),className:`absolute inset-0 w-full h-full object-contain`,style:h?.camera_rotation?{transform:`rotate(${h.camera_rotation}deg)`}:void 0,onError:v},a),(0,G.jsx)(`a`,{href:`https://github.com/maziggy/bambuddy`,target:`_blank`,rel:`noopener noreferrer`,className:`absolute top-4 right-4 z-10`,children:(0,G.jsx)(`img`,{src:`/img/bambuddy_logo_dark_transparent.png`,alt:`Bambuddy`,className:`${c.logoHeight} object-contain drop-shadow-lg hover:scale-105 transition-transform`})}),(0,G.jsx)(`div`,{className:`absolute bottom-0 left-0 right-0 z-10 bg-gradient-to-t from-black/80 via-black/60 to-transparent`,children:(0,G.jsxs)(`div`,{className:`${c.container}`,children:[s.showPrinter&&h&&(0,G.jsxs)(`div`,{className:`flex items-center ${c.gap} mb-2`,children:[(0,G.jsx)(Ll,{className:`${c.icon} text-white/70`}),(0,G.jsx)(`span`,{className:`${c.text} text-white font-medium`,children:h.name})]}),s.showFilename&&g.current_print&&(0,G.jsx)(`div`,{className:`${c.textLarge} text-white font-semibold mb-2 truncate drop-shadow-md`,children:U$e(g.current_print.replace(/\.gcode\.3mf$|\.3mf$|\.gcode$/i,``),g.gcode_file,n)}),s.showStatus&&(0,G.jsx)(`div`,{className:`${c.text} text-white/70 mb-2`,children:G$e(g,n)}),s.showProgress&&b&&(0,G.jsxs)(`div`,{className:`mb-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-1 ${c.text}`,children:[(0,G.jsx)(`span`,{className:`text-white/70`,children:n(`streamOverlay.progress`)}),(0,G.jsxs)(`span`,{className:`text-white font-bold`,children:[Math.round(x),`%`]})]}),(0,G.jsx)(`div`,{className:`w-full bg-white/20 rounded-full ${c.progressHeight}`,children:(0,G.jsx)(`div`,{className:`bg-bambu-green ${c.progressHeight} rounded-full transition-all duration-500`,style:{width:`${x}%`}})})]}),b&&(s.showLayers||s.showEta)&&(0,G.jsxs)(`div`,{className:`flex items-center ${c.gap} flex-wrap`,children:[s.showLayers&&g.layer_num!=null&&g.total_layers!=null&&g.total_layers>0&&(0,G.jsxs)(`div`,{className:`flex items-center ${c.gap} text-white/70`,children:[(0,G.jsx)(qc,{className:c.icon}),(0,G.jsxs)(`span`,{className:c.text,children:[(0,G.jsx)(`span`,{className:`text-white`,children:g.layer_num}),(0,G.jsx)(`span`,{className:`mx-1`,children:`/`}),(0,G.jsx)(`span`,{children:g.total_layers})]})]}),s.showEta&&g.remaining_time!=null&&g.remaining_time>0&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex items-center ${c.gap} text-white/70`,children:[(0,G.jsx)(Mu,{className:c.icon}),(0,G.jsx)(`span`,{className:`${c.text} text-white`,children:op(g.remaining_time*60)})]}),(0,G.jsxs)(`div`,{className:`flex items-center ${c.gap} text-white/70`,children:[(0,G.jsx)(js,{className:c.icon}),(0,G.jsxs)(`span`,{className:`${c.text} text-white`,children:[n(`streamOverlay.eta`),` `,ap(g.remaining_time,_,n)]})]})]})]}),!b&&(0,G.jsx)(`div`,{className:`${c.text} text-white/70 py-2`,children:g.connected?n(`streamOverlay.printerIdle`):n(`streamOverlay.printerOffline`)}),C.length>0&&(0,G.jsx)(`div`,{className:`flex items-center ${c.gap} flex-wrap mt-2`,children:C.map(e=>(0,G.jsx)(K$e,{icon:e.icon,label:e.label,current:e.current,target:e.target,sizes:c},e.key))})]})})]})}function Y$e(){let{t:e}=U(),{id:t}=dr(),{mode:n}=Pd(),{data:r,isLoading:i,error:a}=K({queryKey:[`external-link`,t],queryFn:()=>Z.getExternalLink(Number(t)),enabled:!!t});return i?(0,G.jsx)(`div`,{className:`flex items-center justify-center h-full`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):a||!r?(0,G.jsxs)(`div`,{className:`flex flex-col items-center justify-center h-full gap-4 text-bambu-gray`,children:[(0,G.jsx)(Iu,{className:`w-12 h-12`}),(0,G.jsx)(`p`,{children:e(`common.linkNotFound`)})]}):(0,G.jsx)(`iframe`,{src:r.url,className:`h-full w-full border-0`,style:{colorScheme:n},title:r.name,sandbox:`allow-scripts allow-same-origin allow-forms allow-popups allow-popups-to-escape-sandbox`})}function X$e(){let{id:e}=dr(),t=or(),n=co(),{t:r}=U(),{showToast:i}=Gd(),a=!!e,[o,s]=(0,y.useState)(``),[c,l]=(0,y.useState)(``),[u,d]=(0,y.useState)([]),[f,p]=(0,y.useState)(``),[m,h]=(0,y.useState)(!1),{data:g,isLoading:_}=K({queryKey:[`group`,e],queryFn:()=>Z.getGroup(Number(e)),enabled:a}),{data:v,isLoading:b}=K({queryKey:[`permissions`],queryFn:()=>Z.getPermissions()});a&&g&&!m&&(s(g.name),l(g.description||``),d(g.permissions),h(!0));let x=q({mutationFn:e=>Z.createGroup(e),onSuccess:()=>{n.invalidateQueries({queryKey:[`groups`]}),n.invalidateQueries({queryKey:[`group`]}),i(r(`groups.toast.created`)),t(`/settings?tab=users`)},onError:e=>{i(e.message,`error`)}}),S=q({mutationFn:t=>Z.updateGroup(Number(e),t),onSuccess:a=>{n.invalidateQueries({queryKey:[`groups`]}),a&&n.setQueryData([`group`,e],a),i(r(`groups.toast.updated`)),t(`/settings?tab=users`)},onError:e=>{i(e.message,`error`)}}),C=x.isPending||S.isPending,w=()=>{if(!o.trim()){i(r(`groups.toast.enterGroupName`),`error`);return}a?S.mutate({name:o===g?.name?void 0:o,description:c,permissions:u}):x.mutate({name:o,description:c||void 0,permissions:u})},T=e=>{d(t=>t.includes(e)?t.filter(t=>t!==e):[...t,e])},E=(e,t)=>{let n=e.permissions.map(e=>e.value);d(e=>{let r=e.filter(e=>!n.includes(e));return t?[...r,...n]:r})},D=e=>e.permissions.every(e=>u.includes(e.value)),O=e=>{let t=e.permissions.filter(e=>u.includes(e.value)).length;return t>0&&t<e.permissions.length},k=()=>{v&&d(v.all_permissions)},A=()=>{d([])},j=f.toLowerCase(),M=(0,y.useMemo)(()=>v?j?v.categories.map(e=>({...e,permissions:e.permissions.filter(e=>e.label.toLowerCase().includes(j))})).filter(e=>e.permissions.length>0):v.categories:[],[v,j]),N=v?.all_permissions.length??0;return _||b?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-16`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):(0,G.jsxs)(`div`,{className:`space-y-6 max-w-5xl mx-auto`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`button`,{onClick:()=>t(`/settings?tab=users`),className:`p-2 rounded-lg hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(Lo,{className:`w-5 h-5`})}),(0,G.jsx)(`h1`,{className:`text-xl font-bold text-white`,children:r(a?`groups.editor.title`:`groups.editor.createTitle`)})]}),a&&g?.is_system&&(0,G.jsxs)(`div`,{className:`flex items-center gap-3 px-4 py-3 rounded-lg bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/20 text-yellow-700 dark:text-yellow-400 text-sm`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 shrink-0`}),r(`groups.form.systemGroupWarning`)]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:r(`groups.form.groupName`)}),(0,G.jsx)(`input`,{type:`text`,value:o,onChange:e=>s(e.target.value),disabled:a&&g?.is_system,className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors disabled:opacity-50`,placeholder:r(`groups.form.groupNamePlaceholder`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-white mb-2`,children:r(`groups.form.description`)}),(0,G.jsx)(`input`,{type:`text`,value:c,onChange:e=>l(e.target.value),className:`w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:r(`groups.form.descriptionPlaceholder`)})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between flex-wrap gap-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[r(`groups.editor.permissionsSelected`,{count:u.length}),` / `,N]}),(0,G.jsx)(Q,{size:`sm`,variant:`ghost`,onClick:k,children:r(`groups.editor.selectAll`)}),(0,G.jsx)(Q,{size:`sm`,variant:`ghost`,onClick:A,children:r(`groups.editor.clearAll`)})]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`w-4 h-4 absolute left-3 top-1/2 -translate-y-1/2 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,value:f,onChange:e=>p(e.target.value),placeholder:r(`groups.editor.search`),className:`pl-9 pr-4 py-2 text-sm bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors w-64`})]})]}),M.length===0?(0,G.jsx)(`div`,{className:`text-center py-12 text-bambu-gray`,children:r(`groups.editor.noResults`)}):(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-4`,children:M.map(e=>{let t=v.categories.find(t=>t.name===e.name),n=t.permissions.filter(e=>u.includes(e.value)).length,i=t.permissions.length,a=D(t),o=O(t);return(0,G.jsxs)(Ld,{children:[(0,G.jsxs)(`div`,{className:`sticky top-0 z-10 flex items-center justify-between px-4 py-3 bg-bambu-dark-secondary border-b border-bambu-dark-tertiary rounded-t-xl`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>E(t,!a),className:`w-5 h-5 rounded border flex items-center justify-center transition-colors shrink-0 ${a?`bg-bambu-green border-bambu-green`:o?`bg-bambu-green/50 border-bambu-green`:`border-bambu-gray hover:border-white`}`,children:[a&&(0,G.jsx)(fs,{className:`w-3 h-3 text-white`}),o&&!a&&(0,G.jsx)(pl,{className:`w-3 h-3 text-white`})]}),(0,G.jsx)(ou,{className:`w-4 h-4 text-bambu-gray shrink-0`}),(0,G.jsx)(`span`,{className:`text-white font-medium text-sm`,children:e.name})]}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray tabular-nums`,children:[n,`/`,i]})]}),(0,G.jsx)(`div`,{className:`p-3 space-y-1`,children:e.permissions.map(e=>(0,G.jsxs)(`label`,{className:`flex items-center gap-3 px-2 py-1.5 rounded hover:bg-bambu-dark-secondary cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:u.includes(e.value),onChange:()=>T(e.value),className:`w-4 h-4 shrink-0 rounded border-bambu-gray text-bambu-green focus:ring-bambu-green focus:ring-offset-0 bg-bambu-dark-secondary`}),(0,G.jsxs)(`span`,{className:`flex flex-col`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.label}),e.value===`websocket:connect`&&(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray/60`,children:r(`groups.editor.websocketHint`)})]})]},e.value))})]},e.name)})}),(0,G.jsx)(`div`,{className:`h-16`}),(0,G.jsxs)(`div`,{className:`fixed bottom-0 left-0 right-0 z-20 px-6 py-3 bg-bambu-dark-secondary border-t border-bambu-dark-tertiary flex items-center justify-center gap-3`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:()=>t(`/settings?tab=users`),children:r(`common.cancel`)}),(0,G.jsx)(Q,{onClick:w,disabled:C||!o.trim(),children:C?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),r(`common.saving`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Kl,{className:`w-4 h-4`}),r(`common.save`)]})})]})]})}var Z$e=1.65,Q$e=[`#1DB954`,`#3B82F6`,`#F59E0B`,`#EF4444`,`#8B5CF6`];function s9(e,t,n,r){return`${e}||${t??``}||${n??``}||${r??``}`}function c9(e,t){let n=new Date(e);return n.setDate(n.getDate()+Math.round(t)),n}function l9(e){return e.toLocaleDateString(void 0,{month:`short`,day:`numeric`,year:`numeric`})}function u9(e){return e.toLocaleDateString(void 0,{month:`short`,day:`numeric`})}function $$e(e){if(e.length<2)return null;let t=new Map;for(let n of e){let e=n.created_at.slice(0,10);t.set(e,(t.get(e)??0)+n.weight_used)}if(t.size<2)return null;let n=[...t.entries()].map(([e,t])=>({ms:new Date(e).getTime(),totalG:t})).sort((e,t)=>e.ms-t.ms),r=Date.now(),i=Math.LN2/30,a=[];for(let e=1;e<n.length;e++){let t=Math.max((n[e].ms-n[e-1].ms)/864e5,1),o=(r-n[e].ms)/864e5,s=n[e].totalG/t,c=Math.exp(-i*o);a.push({rate:s,weight:c})}let o=a.reduce((e,t)=>e+t.weight,0);if(o===0)return null;let s=a.reduce((e,t)=>e+t.rate*t.weight,0)/o,c=a.reduce((e,t)=>e+t.weight*(t.rate-s)**2,0)/o;return{rate:s,stdDev:Math.sqrt(c)}}function e1e(e){let t=e.reduce((e,t)=>e+Math.max(0,t.weight_used-(t.weight_used_baseline??0)),0);if(t===0)return null;let n=Date.now(),r=(n-e.reduce((e,t)=>{let n=new Date(t.created_at).getTime();return n<e?n:e},n))/864e5;return r<1?null:t/r}function t1e(e,t=60){if(e.dailyRateG===null)return[];let n=e.dailyRateG,r=[];for(let i=0;i<=t;i++){let t=Math.max(0,e.totalRemainingG-n*i);if(r.push({day:i,label:u9(c9(new Date,i)),stock:Math.round(t),rop:Math.round(e.reorderPointG)}),t===0)break}return r}function n1e({spools:e}){let t=co(),{showToast:n}=Gd(),{t:r}=U(),{hasPermission:i,hasAnyPermission:a}=jd(),o=i(`inventory:forecast_read`),s=a(`inventory:forecast_write`,`inventory:update`),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(`material`),[f,p]=(0,y.useState)(`asc`),[m,h]=(0,y.useState)(``),[g,_]=(0,y.useState)(``),[v,b]=(0,y.useState)(null),[x,S]=(0,y.useState)(!1),[C,w]=(0,y.useState)(30),{data:T}=K({queryKey:[`settings`],queryFn:Z.getSettings,enabled:o}),{data:E=[]}=K({queryKey:[`sku-settings`],queryFn:Z.getSkuSettings,staleTime:6e4,enabled:o}),{data:D=[]}=K({queryKey:[`all-usage-history-forecast`],queryFn:()=>Z.getAllUsageHistory(5e3),staleTime:6e4,enabled:o}),{data:O=[]}=K({queryKey:[`shopping-list`],queryFn:Z.getShoppingList,staleTime:3e4,enabled:o}),k=T?.forecast_global_lead_time_days??0,A=(0,y.useMemo)(()=>{let e=new Map;for(let t of E)e.set(s9(t.material,t.subtype,t.brand,t.color_name),t);return e},[E]),j=(0,y.useMemo)(()=>{let e=new Map;for(let t of D){let n=e.get(t.spool_id)??[];n.push(t),e.set(t.spool_id,n)}return e},[D]),M=(0,y.useMemo)(()=>{let t=new Map;for(let n of e){if(n.archived_at)continue;let e=s9(n.material,n.subtype,n.brand,n.color_name),r=t.get(e)??{key:e,material:n.material,subtype:n.subtype,brand:n.brand,colorName:n.color_name,spools:[]};r.spools.push(n),t.set(e,r)}return[...t.values()]},[e]),N=(0,y.useMemo)(()=>{let e=new Date;return e.setHours(0,0,0,0),M.map(t=>{let n=A.get(t.key)??(t.colorName===null?null:A.get(s9(t.material,t.subtype,t.brand,null))??null),r=n?.lead_time_days??0,i=Math.max(k,r),a=n?.safety_margin_value??14,o=n?.safety_margin_unit??`days`,s=t.spools.reduce((e,t)=>e+Math.max(0,t.label_weight-t.weight_used),0),c=t.spools.reduce((e,t)=>e+t.label_weight,0),l=t.spools.reduce((e,t)=>e+Math.max(0,t.weight_used-(t.weight_used_baseline??0)),0),u=[];for(let e of t.spools)(e.weight_used_baseline??0)===0&&u.push(...j.get(e.id)??[]);let d=null,f=null,p=`none`,m=$$e(u);if(m!==null)d=m.rate,f=m.stdDev,p=`history`;else{let e=e1e(t.spools);e!==null&&(d=e,p=`delta`)}let h=Z$e*(f??(d===null?0:d*.2))*Math.sqrt(i)+(o===`g`?a:d===null?a*5:d*a),g=d===null?0:d*i+h,_=d&&d>0?Math.floor(s/d):null,v=_===null?null:c9(e,_),y=d&&d>0?Math.floor((s-g)/d):null,b=y===null?null:c9(e,Math.max(0,y)),x=_!==null&&i>0&&_<=i,S=!x&&y!==null&&y<=0;return{group:t,settings:n,totalRemainingG:s,totalLabelG:c,totalSpools:t.spools.length,totalUsedG:l,dailyRateG:d,dailyRateStdDev:f,rateTier:p,effectiveLeadTimeDays:i,safetyStockG:h,reorderPointG:g,daysRemaining:_,daysUntilROP:y,projectedEmptyDate:v,reorderTriggerDate:b,reorderAlert:S,stockBreakAlert:x}})},[M,A,j,k]),P=(0,y.useMemo)(()=>[...new Set(M.map(e=>e.material))].sort(),[M]),F=(0,y.useMemo)(()=>[...new Set(M.map(e=>e.brand).filter(Boolean))].sort(),[M]),I=(0,y.useMemo)(()=>{let e=[...N];return m&&(e=e.filter(e=>e.group.material===m)),g&&(e=e.filter(e=>e.group.brand===g)),e.sort((e,t)=>{let n=0,r=0;switch(u){case`material`:n=[e.group.material,e.group.subtype??``,e.group.brand??``].join(` `).toLowerCase(),r=[t.group.material,t.group.subtype??``,t.group.brand??``].join(` `).toLowerCase();break;case`used`:n=e.totalUsedG,r=t.totalUsedG;break;case`days_left`:n=e.daysRemaining??999999,r=t.daysRemaining??999999;break;case`stock`:n=e.totalRemainingG,r=t.totalRemainingG;break}let i=n<r?-1:+(n>r);return f===`asc`?i:-i}),e},[N,u,f,m,g]),L=(0,y.useMemo)(()=>N.filter(e=>!e.settings?.alerts_snoozed&&(e.stockBreakAlert||e.reorderAlert)),[N]),R=(0,y.useMemo)(()=>[...N].filter(e=>e.dailyRateG!==null).sort((e,t)=>t.totalUsedG-e.totalUsedG).slice(0,5),[N]);if(!o)return(0,G.jsxs)(`div`,{className:`flex flex-col items-center justify-center py-16 text-bambu-gray gap-3`,children:[(0,G.jsx)(tl,{className:`w-8 h-8 opacity-40`}),(0,G.jsx)(`p`,{className:`text-sm`,children:r(`forecast.noReadAccess`)})]});function z(e){u===e?p(e=>e===`asc`?`desc`:`asc`):(d(e),p(e===`days_left`?`asc`:`desc`))}let B=O.length>0?O.length:null;return(0,G.jsxs)(`div`,{className:`space-y-5`,children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-3`,children:[L.length>0&&(0,G.jsxs)(`button`,{onClick:()=>l(e=>!e),className:`flex items-center gap-2 px-3 py-1.5 rounded-lg border text-sm font-medium transition-colors ${L.some(e=>e.stockBreakAlert)?`bg-red-100 dark:bg-red-500/15 border-red-300 dark:border-red-500/30 text-red-700 dark:text-red-300 hover:bg-red-200 dark:hover:bg-red-500/25`:`bg-yellow-100 dark:bg-yellow-500/15 border-yellow-300 dark:border-yellow-500/30 text-yellow-700 dark:text-yellow-300 hover:bg-yellow-200 dark:hover:bg-yellow-500/25`}`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4`}),r(`forecast.alertCount`,{count:L.length}),c?(0,G.jsx)(gs,{className:`w-3.5 h-3.5`}):(0,G.jsx)(ps,{className:`w-3.5 h-3.5`})]}),s&&(0,G.jsx)(o1e,{value:k,onSave:e=>{Z.updateSettings({forecast_global_lead_time_days:e}).then(()=>{t.invalidateQueries({queryKey:[`settings`]}),n(r(`forecast.globalLeadTimeSaved`),`success`)})}}),(0,G.jsxs)(`select`,{value:m,onChange:e=>h(e.target.value),className:`px-3 py-1.5 rounded-lg border text-xs font-medium transition-colors cursor-pointer focus:outline-none ${m?`bg-bambu-green/20 text-bambu-green border-bambu-green/30`:`bg-transparent text-bambu-gray border-bambu-dark-tertiary hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(`option`,{value:``,children:r(`inventory.material`)}),P.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]}),(0,G.jsxs)(`select`,{value:g,onChange:e=>_(e.target.value),className:`px-3 py-1.5 rounded-lg border text-xs font-medium transition-colors cursor-pointer focus:outline-none ${g?`bg-bambu-green/20 text-bambu-green border-bambu-green/30`:`bg-transparent text-bambu-gray border-bambu-dark-tertiary hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(`option`,{value:``,children:r(`inventory.brand`)}),F.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]}),(0,G.jsxs)(`button`,{onClick:()=>S(e=>!e),className:`relative flex items-center gap-2 px-3 py-1.5 rounded-lg border border-bambu-dark-tertiary text-bambu-gray hover:bg-bambu-dark-tertiary text-sm transition-colors ml-auto`,children:[(0,G.jsx)(su,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:r(`forecast.shoppingList`)}),B&&(0,G.jsx)(`span`,{className:`absolute -top-1.5 -right-1.5 w-4 h-4 rounded-full bg-bambu-green text-white text-[10px] font-bold flex items-center justify-center`,children:B})]})]}),c&&L.length>0&&(0,G.jsx)(`div`,{className:`space-y-2`,children:L.map(e=>(0,G.jsx)(r1e,{forecast:e,onCart:()=>b(e)},e.group.key))}),x&&(0,G.jsx)(d1e,{items:O,forecasts:N,globalLeadTime:k,canWrite:s,onClose:()=>S(!1),onRemove:e=>{Z.removeFromShoppingList(e).then(()=>t.invalidateQueries({queryKey:[`shopping-list`]})).catch(()=>n(r(`forecast.failedSaveSettings`),`error`))},onClear:()=>{Z.clearShoppingList().then(()=>t.invalidateQueries({queryKey:[`shopping-list`]})).catch(()=>n(r(`forecast.failedSaveSettings`),`error`))}}),R.length>0&&(0,G.jsx)(a1e,{forecasts:R,days:C,onDaysChange:w}),N.length===0?(0,G.jsxs)(`div`,{className:`flex flex-col items-center justify-center py-16 text-bambu-gray`,children:[(0,G.jsx)(Pu,{className:`w-10 h-10 mb-3 opacity-40`}),(0,G.jsx)(`p`,{className:`text-sm`,children:r(`forecast.noSpools`)})]}):(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg overflow-hidden border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary bg-bambu-dark-tertiary/30`,children:[(0,G.jsx)(`th`,{className:`w-8 px-4 py-3`}),(0,G.jsx)(d9,{col:`material`,active:u,dir:f,onSort:z,children:r(`forecast.sku`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:r(`locations.spools`)}),(0,G.jsx)(d9,{col:`stock`,active:u,dir:f,onSort:z,children:r(`forecast.stock`)}),(0,G.jsx)(d9,{col:`used`,active:u,dir:f,onSort:z,children:r(`forecast.dailyRate`)}),(0,G.jsx)(d9,{col:`days_left`,active:u,dir:f,onSort:z,children:r(`forecast.daysLeft`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:r(`forecast.emptyBy`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:r(`forecast.reorderBy`)}),(0,G.jsx)(`th`,{className:`w-24 px-4 py-3`})]})}),(0,G.jsx)(`tbody`,{className:`divide-y divide-bambu-dark-tertiary`,children:I.map(e=>(0,G.jsx)(s1e,{forecast:e,globalLeadTime:k,canWrite:s,onSaved:()=>t.invalidateQueries({queryKey:[`sku-settings`]}),onCart:()=>b(e),showToast:n},e.group.key))})]})}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-4 px-4 py-3 text-xs text-bambu-gray border-t border-bambu-dark-tertiary bg-bambu-dark-tertiary/20`,children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full bg-bambu-green inline-block`}),r(`forecast.trendLegend`)]}),(0,G.jsxs)(`span`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full bg-blue-400 inline-block`}),r(`forecast.estimatedLegend`)]}),(0,G.jsxs)(`span`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(`span`,{className:`w-2 h-2 rounded-full bg-bambu-gray/40 inline-block`}),r(`forecast.noDataLegend`)]})]})]}),v&&(0,G.jsx)(p1e,{forecast:v,onClose:()=>b(null),onAdd:e=>{Z.addToShoppingList(e).then(()=>{t.invalidateQueries({queryKey:[`shopping-list`]}),n(r(`forecast.addedToCart`),`success`),b(null),S(!0)}).catch(()=>n(r(`forecast.failedAddItem`),`error`))}})]})}function d9({col:e,active:t,dir:n,onSort:r,children:i}){return(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide cursor-pointer select-none hover:text-white transition-colors`,onClick:()=>r(e),children:(0,G.jsxs)(`span`,{className:`inline-flex items-center`,children:[i,t===e?n===`asc`?(0,G.jsx)(Ho,{className:`w-3 h-3 ml-1 text-bambu-green`}):(0,G.jsx)(Io,{className:`w-3 h-3 ml-1 text-bambu-green`}):(0,G.jsx)(Bo,{className:`w-3 h-3 ml-1 opacity-40`})]})})}function r1e({forecast:e,onCart:t}){let{t:n}=U(),r=[e.group.brand,e.group.material,e.group.subtype,e.group.colorName].filter(Boolean).join(` `),i=e.stockBreakAlert;return(0,G.jsxs)(`div`,{className:`flex items-center gap-3 px-4 py-3 rounded-lg border text-sm ${i?`bg-red-50 dark:bg-red-500/10 border-red-300 dark:border-red-500/30 text-red-700 dark:text-red-300`:`bg-yellow-50 dark:bg-yellow-500/10 border-yellow-300 dark:border-yellow-500/30 text-yellow-700 dark:text-yellow-300`}`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`span`,{className:`font-medium`,children:r}),i?(0,G.jsxs)(`span`,{className:`ml-2 text-xs opacity-80`,children:[n(`forecast.stockBreakRisk`),` — `,n(`forecast.stockBreakDetail`,{days:e.daysRemaining,lt:e.effectiveLeadTimeDays})]}):(0,G.jsxs)(`span`,{className:`ml-2 text-xs opacity-80`,children:[n(`forecast.reorderNow`),` — `,n(`forecast.reorderTriggerPassed`,{date:e.reorderTriggerDate?l9(e.reorderTriggerDate):`—`})]})]}),(0,G.jsxs)(`button`,{onClick:t,className:`flex items-center gap-1.5 px-2.5 py-1 rounded border border-current text-xs opacity-70 hover:opacity-100 transition-opacity`,children:[(0,G.jsx)(su,{className:`w-3 h-3`}),` `,n(`forecast.order`)]})]})}var i1e=[{label:`1W`,value:7},{label:`1M`,value:30},{label:`6M`,value:180}];function a1e({forecasts:e,days:t,onDaysChange:n}){let{t:r}=U(),i=Array.from({length:t+1},(e,t)=>t),a=e.map((e,n)=>({key:e.group.key,label:[e.group.brand,e.group.material,e.group.subtype,e.group.colorName].filter(Boolean).join(` `),color:Q$e[n%Q$e.length],rop:e.reorderPointG,points:t1e(e,t)})),o=i.map(e=>{let t={day:e,label:u9(c9(new Date,e))};for(let n of a){let r=n.points.find(t=>t.day===e);t[n.key]=r?.stock??0}return t}),s=(()=>{for(let e=t;e>=0;e--)if(a.some(t=>o[e]?.[t.key]>0))return e;return t})(),c=o.slice(0,s+1),l=a.filter(e=>e.rop>0);return(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg overflow-hidden border border-bambu-dark-tertiary p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-4`,children:[(0,G.jsx)(Pu,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-white`,children:r(`forecast.chartTitle`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray ml-1 hidden sm:inline`,children:r(`forecast.dashedLinesROP`)}),(0,G.jsx)(`div`,{className:`ml-auto flex items-center bg-bambu-dark-tertiary rounded-lg p-0.5`,children:i1e.map(e=>(0,G.jsx)(`button`,{onClick:()=>n(e.value),className:`px-2.5 py-1 text-xs font-medium rounded-md transition-colors ${t===e.value?`bg-bambu-dark-secondary text-white shadow`:`text-bambu-gray hover:text-white`}`,children:e.label},e.value))})]}),(0,G.jsx)(lA,{width:`100%`,height:220,children:(0,G.jsxs)(pU,{data:c,margin:{top:4,right:8,bottom:0,left:0},children:[(0,G.jsx)(`defs`,{children:a.map(e=>(0,G.jsxs)(`linearGradient`,{id:`grad-${e.key}`,x1:`0`,y1:`0`,x2:`0`,y2:`1`,children:[(0,G.jsx)(`stop`,{offset:`5%`,stopColor:e.color,stopOpacity:.25}),(0,G.jsx)(`stop`,{offset:`95%`,stopColor:e.color,stopOpacity:.02})]},e.key))}),(0,G.jsx)(yV,{strokeDasharray:`3 3`,stroke:`#374151`,strokeOpacity:.5}),(0,G.jsx)(CH,{dataKey:`label`,tick:{fill:`#6B7280`,fontSize:10},interval:Math.max(0,Math.ceil(s/8)-1),axisLine:!1,tickLine:!1}),(0,G.jsx)(OH,{tick:{fill:`#6B7280`,fontSize:10},axisLine:!1,tickLine:!1,tickFormatter:e=>e>=1e3?`${(e/1e3).toFixed(1)}kg`:`${e}g`,width:48}),(0,G.jsx)(tz,{content:({label:e,payload:t})=>t?.length?(0,G.jsxs)(`div`,{style:{background:`#1a1a2e`,border:`1px solid #374151`,borderRadius:8,fontSize:12,padding:`8px 12px`},children:[(0,G.jsx)(`div`,{style:{color:`#9CA3AF`,marginBottom:6},children:e}),t.map(e=>{let t=a.find(t=>t.key===String(e.dataKey));return typeof e.value==`number`?(0,G.jsxs)(`div`,{style:{display:`flex`,alignItems:`center`,gap:6,color:`#E5E7EB`,marginBottom:2},children:[(0,G.jsx)(`span`,{style:{color:t?.color??`#9CA3AF`,fontSize:10},children:`●`}),(0,G.jsx)(`span`,{children:t?.label??String(e.dataKey)}),(0,G.jsxs)(`span`,{style:{color:`#9CA3AF`,marginLeft:4},children:[e.value,`g`]})]},String(e.dataKey)):null})]}):null}),(0,G.jsx)(nj,{formatter:e=>(0,G.jsx)(`span`,{style:{color:`#9CA3AF`,fontSize:11},children:a.find(t=>t.key===e)?.label??e})}),a.map(e=>(0,G.jsx)(tH,{type:`monotone`,dataKey:e.key,stroke:e.color,strokeWidth:2,fill:`url(#grad-${e.key})`,dot:!1,activeDot:{r:3}},e.key)),l.map(e=>(0,G.jsx)(rV,{y:e.rop,stroke:e.color,strokeDasharray:`4 3`,strokeOpacity:.6},`rop-${e.key}`))]})})]})}function o1e({value:e,onSave:t}){let{t:n}=U(),[r,i]=(0,y.useState)(!1),[a,o]=(0,y.useState)(String(e));function s(){let e=parseInt(a,10);isNaN(e)||e<0||(t(e),i(!1))}return(0,G.jsxs)(`div`,{className:`flex items-center gap-2 px-3 py-1.5 bg-bambu-dark-tertiary/40 rounded-lg border border-bambu-dark-tertiary text-xs text-bambu-gray`,children:[(0,G.jsx)(Uc,{className:`w-3.5 h-3.5 flex-shrink-0`,"aria-label":n(`forecast.globalLeadTimeHint`)}),(0,G.jsxs)(`span`,{className:`hidden sm:inline`,children:[n(`forecast.globalLeadTime`),`:`]}),r?(0,G.jsxs)(`form`,{className:`flex items-center gap-1.5`,onSubmit:e=>{e.preventDefault(),s()},children:[(0,G.jsx)(`input`,{type:`number`,min:0,max:365,value:a,onChange:e=>o(e.target.value),className:`w-14 px-1.5 py-0.5 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-sm text-white focus:outline-none focus:border-bambu-green`,autoFocus:!0}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:`d`}),(0,G.jsx)(`button`,{type:`submit`,className:`px-2 py-0.5 bg-bambu-green text-white text-xs rounded hover:bg-bambu-green/80`,children:n(`forecast.save`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>i(!1),className:`text-xs text-bambu-gray hover:text-white`,children:`✕`})]}):(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsxs)(`span`,{className:`font-semibold text-white`,children:[e,`d`]}),(0,G.jsx)(`button`,{onClick:()=>{o(String(e)),i(!0)},className:`p-0.5 text-bambu-gray hover:text-white rounded transition-colors`,children:(0,G.jsx)(Ol,{className:`w-3 h-3`})})]})]})}function s1e({forecast:e,globalLeadTime:t,canWrite:n,onSaved:r,onCart:i,showToast:a}){let{t:o}=U(),[s,c]=(0,y.useState)(!1),[l,u]=(0,y.useState)(!1),[d,f]=(0,y.useState)(!1),[p,m]=(0,y.useState)(String(e.settings?.lead_time_days??0)),[h,g]=(0,y.useState)(String(e.settings?.safety_margin_value??14)),[_,v]=(0,y.useState)(e.settings?.safety_margin_unit??`days`);(0,y.useEffect)(()=>{l||m(String(e.settings?.lead_time_days??0))},[e.settings?.lead_time_days,l]),(0,y.useEffect)(()=>{d||(g(String(e.settings?.safety_margin_value??14)),v(e.settings?.safety_margin_unit??`days`))},[e.settings?.safety_margin_value,e.settings?.safety_margin_unit,d]);let b=q({mutationFn:Z.upsertSkuSettings,onSuccess:()=>{r(),a(o(`forecast.settingsSaved`),`success`)},onError:()=>a(o(`forecast.failedSaveSettings`),`error`)}),x=e.settings?.alerts_snoozed??!1,S=[e.group.brand,e.group.material,e.group.subtype,e.group.colorName].filter(Boolean).join(` `),C=e.group.spools[0]?.rgba?kf(e.group.spools[0].rgba):{backgroundColor:`#4B5563`},w=e.totalLabelG>0?Math.round(e.totalRemainingG/e.totalLabelG*100):0,T=x||e.daysRemaining===null?`text-bambu-gray`:e.stockBreakAlert?`text-red-700 dark:text-red-400`:e.reorderAlert||e.daysRemaining<30?`text-yellow-700 dark:text-yellow-400`:`text-green-700 dark:text-green-400`;function E(t,n,r,i=x){b.mutate({material:e.group.material,subtype:e.group.subtype,brand:e.group.brand,color_name:e.group.colorName,lead_time_days:t,safety_margin_value:n,safety_margin_unit:r,alerts_snoozed:i})}function D(t){t.stopPropagation(),E(e.settings?.lead_time_days??0,e.settings?.safety_margin_value??14,e.settings?.safety_margin_unit??`days`,!x)}let O=e.rateTier===`history`?(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 text-xs px-1.5 py-0.5 rounded bg-bambu-green/15 text-bambu-green`,children:[(0,G.jsx)(`span`,{className:`w-1.5 h-1.5 rounded-full bg-bambu-green`}),o(`forecast.trend`)]}):e.rateTier===`delta`?(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 text-xs px-1.5 py-0.5 rounded bg-blue-100 dark:bg-blue-400/15 text-blue-700 dark:text-blue-400`,children:[(0,G.jsx)(`span`,{className:`w-1.5 h-1.5 rounded-full bg-blue-400`}),o(`forecast.estimated`)]}):(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 text-xs px-1.5 py-0.5 rounded bg-bambu-dark-tertiary text-bambu-gray/60`,children:[(0,G.jsx)(`span`,{className:`w-1.5 h-1.5 rounded-full bg-bambu-gray/40`}),o(`forecast.noData`)]});return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/50 cursor-pointer hover:bg-bambu-dark-tertiary/30 transition-colors ${x?``:e.stockBreakAlert?`bg-red-500/5`:e.reorderAlert?`bg-yellow-500/5`:``} ${x?`opacity-50`:``}`,onClick:()=>c(e=>!e),children:[(0,G.jsx)(`td`,{className:`px-4 py-3`,children:(0,G.jsx)(`span`,{className:`block w-5 h-5 rounded-full border border-black/20`,style:C})}),(0,G.jsx)(`td`,{className:`px-4 py-3`,children:(0,G.jsx)(`span`,{className:`text-sm text-white`,children:S})}),(0,G.jsx)(`td`,{className:`px-4 py-3`,children:(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.totalSpools})}),(0,G.jsx)(`td`,{className:`px-4 py-3 min-w-[140px]`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`div`,{className:`flex-1 h-2 bg-bambu-dark-tertiary rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full ${w>50?`bg-bambu-green`:w>20?`bg-yellow-500`:`bg-red-500`}`,style:{width:`${Math.min(w,100)}%`}})}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray min-w-[40px] text-right`,children:[Math.round(e.totalRemainingG),`g`]})]})}),(0,G.jsx)(`td`,{className:`px-4 py-3`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 flex-wrap`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:e.dailyRateG===null?`—`:`${e.dailyRateG.toFixed(1)}g/d`}),O]})}),(0,G.jsx)(`td`,{className:`px-4 py-3`,children:(0,G.jsx)(`span`,{className:`text-sm font-semibold ${T}`,children:e.daysRemaining===null?(0,G.jsx)(`span`,{className:`text-bambu-gray font-normal`,children:`—`}):`${e.daysRemaining}d`})}),(0,G.jsx)(`td`,{className:`px-4 py-3`,children:(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.projectedEmptyDate?l9(e.projectedEmptyDate):`—`})}),(0,G.jsx)(`td`,{className:`px-4 py-3`,children:(0,G.jsx)(`span`,{className:`text-sm ${!x&&e.reorderAlert?`text-yellow-700 dark:text-yellow-400`:`text-bambu-gray`}`,children:e.reorderTriggerDate?l9(e.reorderTriggerDate):`—`})}),(0,G.jsx)(`td`,{className:`px-4 py-3`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-1`,children:[n&&(0,G.jsx)(`button`,{onClick:i,className:`p-1.5 text-bambu-gray hover:text-bambu-green rounded transition-colors`,title:o(`forecast.addToCart`),children:(0,G.jsx)(su,{className:`w-4 h-4`})}),!x&&(e.stockBreakAlert?(0,G.jsx)(Iu,{className:`w-4 h-4 text-red-600 dark:text-red-400`,"aria-label":o(`forecast.stockBreakRisk`)}):e.reorderAlert?(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-600 dark:text-yellow-400`,"aria-label":o(`forecast.reorderNow`)}):e.daysRemaining===null?null:(0,G.jsx)(fs,{className:`w-4 h-4 text-bambu-green/50`})),n&&(0,G.jsx)(`button`,{onClick:D,className:`p-1 rounded transition-colors ${x?`text-amber-600/80 dark:text-amber-400/80 hover:text-amber-700 dark:hover:text-amber-300`:`text-slate-400 hover:text-white`}`,title:o(x?`forecast.alertsEnabled`:`forecast.alertsSnoozed`),children:(0,G.jsx)(Ko,{className:`w-3.5 h-3.5`})}),(0,G.jsx)(`button`,{onClick:e=>{e.stopPropagation(),c(e=>!e)},className:`p-1.5 text-bambu-gray hover:text-white rounded transition-colors`,children:s?(0,G.jsx)(gs,{className:`w-4 h-4`}):(0,G.jsx)(ps,{className:`w-4 h-4`})})]})})]}),s&&(0,G.jsx)(`tr`,{className:`bg-bambu-dark-tertiary/10`,children:(0,G.jsx)(`td`,{colSpan:9,className:`px-6 py-4`,children:(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`grid gap-2 ${n?`grid-cols-2 sm:grid-cols-4`:`grid-cols-2`}`,children:[(0,G.jsx)(c1e,{label:o(`forecast.effectiveLeadTime`),value:`${e.effectiveLeadTimeDays}d`,hint:o(`forecast.effectiveLeadTimeHint`,{global:t,sku:e.settings?.lead_time_days??0})}),(0,G.jsx)(c1e,{label:o(`forecast.reorderPoint`),value:`${Math.round(e.reorderPointG)}g`,hint:o(`forecast.reorderPointHint`)}),n&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(l1e,{label:o(`forecast.skuLeadTimeOverride`),hint:o(`forecast.skuLeadTimeHint`),unit:o(`forecast.leadTime`),editing:l,value:e.settings?.lead_time_days??0,inputValue:p,onInputChange:m,onEdit:()=>{m(String(e.settings?.lead_time_days??0)),u(!0)},onSave:()=>{let t=parseInt(p,10);!isNaN(t)&&t>=0&&(E(t,e.settings?.safety_margin_value??14,_),u(!1))},onCancel:()=>u(!1),isPending:b.isPending,saveLabel:o(`forecast.save`),cancelLabel:o(`forecast.cancel`)}),(0,G.jsx)(u1e,{value:e.settings?.safety_margin_value??14,unit:_,editing:d,inputValue:h,dailyRateG:e.dailyRateG,onInputChange:g,onUnitChange:e=>v(e),onEdit:()=>{g(String(e.settings?.safety_margin_value??14)),v(e.settings?.safety_margin_unit??`days`),f(!0)},onSave:()=>{let t=parseInt(h,10);!isNaN(t)&&t>=0&&(E(e.settings?.lead_time_days??0,t,_),f(!1))},onCancel:()=>f(!1),isPending:b.isPending,saveLabel:o(`forecast.save`),cancelLabel:o(`forecast.cancel`),safetyMarginLabel:o(`forecast.safetyMarginLabel`)})]})]}),e.group.spools.length>1&&(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary pt-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-2`,children:o(`forecast.individualSpools`)}),(0,G.jsx)(`div`,{className:`bg-bambu-dark-secondary rounded-lg overflow-hidden border border-bambu-dark-tertiary`,children:(0,G.jsxs)(`table`,{className:`w-full`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary bg-bambu-dark-tertiary/30`,children:[(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:`#`}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:o(`inventory.remaining`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:o(`inventory.used`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:o(`forecast.labelWeight`)})]})}),(0,G.jsx)(`tbody`,{className:`divide-y divide-bambu-dark-tertiary`,children:e.group.spools.map(e=>{let t=Math.max(0,e.label_weight-e.weight_used),n=e.label_weight>0?t/e.label_weight*100:0;return(0,G.jsxs)(`tr`,{className:`hover:bg-bambu-dark-tertiary/30 transition-colors`,children:[(0,G.jsx)(`td`,{className:`px-4 py-2`,children:(0,G.jsxs)(`span`,{className:`text-xs font-mono text-bambu-gray/70`,children:[`#`,e.id]})}),(0,G.jsx)(`td`,{className:`px-4 py-2`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-24 h-1.5 bg-bambu-dark-tertiary rounded-full overflow-hidden flex-shrink-0`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full ${n>50?`bg-bambu-green`:n>20?`bg-yellow-500`:`bg-red-500`}`,style:{width:`${Math.min(n,100)}%`}})}),(0,G.jsxs)(`span`,{className:`text-sm text-white`,children:[Math.round(t),`g`]})]})}),(0,G.jsx)(`td`,{className:`px-4 py-2`,children:(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[Math.round(Math.max(0,e.weight_used-(e.weight_used_baseline??0))),`g`]})}),(0,G.jsx)(`td`,{className:`px-4 py-2`,children:(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[e.label_weight,`g`]})})]},e.id)})})]})})]})]})})})]})}function c1e({label:e,value:t,hint:n}){return(0,G.jsxs)(`div`,{className:`bg-bambu-dark-tertiary/40 rounded-lg p-3`,title:n,children:[(0,G.jsx)(`div`,{className:`text-xs font-medium text-white mb-1`,children:e}),(0,G.jsx)(`div`,{className:`text-lg font-semibold text-white`,children:t})]})}function l1e({label:e,hint:t,unit:n,editing:r,value:i,inputValue:a,onInputChange:o,onEdit:s,onSave:c,onCancel:l,isPending:u,saveLabel:d=`Save`,cancelLabel:f=`Cancel`}){return(0,G.jsxs)(`div`,{className:`bg-bambu-dark-tertiary/40 rounded-lg p-3 space-y-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(`span`,{className:`text-xs font-medium text-white`,children:e}),(0,G.jsx)(`span`,{title:t,children:(0,G.jsx)(Uc,{className:`w-3 h-3 text-bambu-gray/50`})})]}),r?(0,G.jsxs)(`form`,{className:`flex items-center gap-2`,onSubmit:e=>{e.preventDefault(),c()},children:[(0,G.jsx)(`input`,{type:`number`,min:0,max:365,value:a,onChange:e=>o(e.target.value),className:`w-20 px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-sm text-white focus:outline-none focus:border-bambu-green`,autoFocus:!0,disabled:u}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:n}),(0,G.jsx)(`button`,{type:`submit`,disabled:u,className:`px-2 py-1 bg-bambu-green text-white text-xs rounded hover:bg-bambu-green/80 disabled:opacity-50`,children:d}),(0,G.jsx)(`button`,{type:`button`,onClick:l,disabled:u,className:`px-2 py-1 text-xs text-bambu-gray hover:text-white`,children:f})]}):(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-lg font-semibold text-white`,children:i}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:n}),(0,G.jsx)(`button`,{onClick:s,className:`p-1 text-bambu-gray hover:text-white rounded transition-colors`,children:(0,G.jsx)(Ol,{className:`w-3 h-3`})})]})]})}function u1e({value:e,unit:t,editing:n,inputValue:r,dailyRateG:i,onInputChange:a,onUnitChange:o,onEdit:s,onSave:c,onCancel:l,isPending:u,saveLabel:d=`Save`,cancelLabel:f=`Cancel`,safetyMarginLabel:p=`Safety Margin`}){let{t:m}=U(),h=t===`g`?e:i===null?null:Math.round(i*e),g=t===`days`?m(`forecast.safetyMarginHintDays`,{approx:h===null?``:m(`forecast.safetyMarginHintDaysApprox`,{g:h})}):m(`forecast.safetyMarginHintG`,{approx:i===null?``:m(`forecast.safetyMarginHintGApprox`,{days:Math.round(e/i)})});return(0,G.jsxs)(`div`,{className:`bg-bambu-dark-tertiary/40 rounded-lg p-3 space-y-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(`span`,{className:`text-xs font-medium text-white`,children:p}),(0,G.jsx)(`span`,{title:g,children:(0,G.jsx)(Uc,{className:`w-3 h-3 text-bambu-gray/50`})})]}),n?(0,G.jsxs)(`form`,{className:`flex items-center gap-2 flex-wrap`,onSubmit:e=>{e.preventDefault(),c()},children:[(0,G.jsx)(`input`,{type:`number`,min:0,max:t===`g`?1e4:365,value:r,onChange:e=>a(e.target.value),className:`w-20 px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-sm text-white focus:outline-none focus:border-bambu-green`,autoFocus:!0,disabled:u}),(0,G.jsxs)(`div`,{className:`flex bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded overflow-hidden text-xs`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>o(`days`),className:`px-2 py-1 transition-colors ${t===`days`?`bg-bambu-green text-white`:`text-bambu-gray hover:text-white`}`,children:`days`}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>o(`g`),className:`px-2 py-1 transition-colors ${t===`g`?`bg-bambu-green text-white`:`text-bambu-gray hover:text-white`}`,children:`g`})]}),(0,G.jsx)(`button`,{type:`submit`,disabled:u,className:`px-2 py-1 bg-bambu-green text-white text-xs rounded hover:bg-bambu-green/80 disabled:opacity-50`,children:d}),(0,G.jsx)(`button`,{type:`button`,onClick:l,disabled:u,className:`px-2 py-1 text-xs text-bambu-gray hover:text-white`,children:f})]}):(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-lg font-semibold text-white`,children:e}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:t}),h!==null&&t===`days`&&(0,G.jsxs)(`span`,{className:`text-lg font-semibold text-white`,children:[`≈ `,h,`g`]}),t===`g`&&i!==null&&(0,G.jsxs)(`span`,{className:`text-lg font-semibold text-white`,children:[`≈ `,Math.round(e/i),`d`]}),(0,G.jsx)(`button`,{onClick:s,className:`p-1 text-bambu-gray hover:text-white rounded transition-colors`,children:(0,G.jsx)(Ol,{className:`w-3 h-3`})})]})]})}function d1e({items:e,forecasts:t,globalLeadTime:n,canWrite:r,onClose:i,onRemove:a,onClear:o}){let{t:s}=U(),c=co(),[l,u]=(0,y.useState)(`list`),d=q({mutationFn:async({id:e,status:t,item:n,avgSpoolG:r})=>{if(await Z.updateShoppingListStatus(e,t),t===`received`&&n){let t=r??1e3,i={material:n.material,subtype:n.subtype,brand:n.brand,label_weight:t,core_weight:0,core_weight_catalog_id:null,color_name:n.color_name,rgba:null,extra_colors:null,effect_type:null,nozzle_temp_min:null,nozzle_temp_max:null,note:n.note??null,tag_uid:null,tray_uuid:null,data_origin:`manual`,tag_type:null,cost_per_kg:null,last_scale_weight:null,last_weighed_at:null,weight_used:0,slicer_filament:null,slicer_filament_name:null,added_full:null,last_used:null,encode_time:null,category:`Stock`,low_stock_threshold_pct:null};await Z.bulkCreateSpools(i,n.quantity_spools),await Z.removeFromShoppingList(e)}},onSuccess:()=>{c.invalidateQueries({queryKey:[`shopping-list`]}),c.invalidateQueries({queryKey:[`spools`]})}}),f=(0,y.useMemo)(()=>{let e=new Map;for(let n of t)e.set(n.group.key,n);return e},[t]),p=(0,y.useMemo)(()=>e.map(e=>({item:e,forecast:f.get(s9(e.material,e.subtype,e.brand,e.color_name))??null})),[e,f]),m=(0,y.useMemo)(()=>p.filter(({forecast:e})=>!e||e.dailyRateG===null?!1:e.stockBreakAlert||e.daysRemaining!==null&&e.daysRemaining<=e.effectiveLeadTimeDays),[p]);function h(){let t=[s(`forecast.qty`),s(`forecast.material`),s(`inventory.brand`),s(`inventory.subtype`),s(`inventory.color`),`${s(`forecast.weight`)} (g)`,`${s(`forecast.leadTime`)} (d)`,s(`forecast.expectedRestock`),s(`forecast.status`),s(`forecast.note`)],r=e.map(e=>{let t=f.get(s9(e.material,e.subtype,e.brand,e.color_name))??null,r=t&&t.totalSpools>0?t.totalLabelG/t.totalSpools:1e3,i=Math.round(e.quantity_spools*r),a=t?.effectiveLeadTimeDays??n??0,o=a>0?l9(c9(new Date,a)):``;return[e.quantity_spools,e.material,e.brand??``,e.subtype??``,e.color_name??``,i,a||``,o,e.status,e.note??``].map(e=>`"${String(e).replace(/"/g,`""`)}"`).join(`,`)}),i=[t.join(`,`),...r].join(`
+`),a=new Blob([i],{type:`text/csv`}),o=URL.createObjectURL(a),c=document.createElement(`a`);c.href=o,c.download=`shopping-list-${new Date().toISOString().slice(0,10)}.csv`,c.click(),setTimeout(()=>URL.revokeObjectURL(o),100)}return(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg overflow-hidden border border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-4 py-3 border-b border-bambu-dark-tertiary bg-bambu-dark-tertiary/30`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(su,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-white`,children:s(`forecast.shoppingList`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:s(`forecast.shoppingListItems`,{count:e.length})}),e.length>0&&(0,G.jsxs)(`div`,{className:`flex bg-bambu-dark-tertiary rounded-md p-0.5 ml-1`,children:[(0,G.jsxs)(`button`,{onClick:()=>u(`list`),className:`flex items-center gap-1.5 px-2 py-0.5 text-xs font-medium rounded transition-colors ${l===`list`?`bg-bambu-dark-secondary text-white shadow`:`text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(Sl,{className:`w-3 h-3`}),s(`forecast.listView`)]}),(0,G.jsxs)(`button`,{onClick:()=>u(`logistics`),className:`flex items-center gap-1.5 px-2 py-0.5 text-xs font-medium rounded transition-colors ${l===`logistics`?`bg-bambu-dark-secondary text-white shadow`:`text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(us,{className:`w-3 h-3`}),s(`forecast.logisticsView`),m.length>0&&(0,G.jsx)(`span`,{className:`w-3.5 h-3.5 rounded-full bg-red-500 text-white text-[9px] font-bold flex items-center justify-center`,children:m.length})]})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[e.length>0&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`button`,{onClick:h,className:`flex items-center gap-1.5 text-xs text-bambu-gray hover:text-white transition-colors px-2 py-1 rounded border border-bambu-dark-tertiary hover:bg-bambu-dark-tertiary`,children:[(0,G.jsx)(Ys,{className:`w-3 h-3`}),s(`forecast.downloadCsv`)]}),r&&(0,G.jsx)(`button`,{onClick:o,className:`text-xs text-red-700 dark:text-red-400 hover:text-red-800 dark:hover:text-red-300 transition-colors px-2 py-1 rounded border border-red-200 dark:border-red-500/20 hover:bg-red-50 dark:hover:bg-red-500/10`,children:s(`forecast.clearAll`)})]}),(0,G.jsx)(`button`,{onClick:i,className:`p-1 text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]})]}),e.length===0?(0,G.jsxs)(`div`,{className:`flex flex-col items-center py-8 text-bambu-gray`,children:[(0,G.jsx)(Sl,{className:`w-8 h-8 mb-2 opacity-30`}),(0,G.jsx)(`p`,{className:`text-sm`,children:s(`forecast.shoppingListEmpty`)})]}):l===`list`?(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary bg-bambu-dark-tertiary/20`,children:[(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:s(`forecast.qty`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:s(`forecast.material`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:s(`forecast.weight`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:s(`forecast.leadTime`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:s(`forecast.expectedRestock`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:s(`forecast.status`)}),(0,G.jsx)(`th`,{className:`px-4 py-3 text-left text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:s(`forecast.note`)}),(0,G.jsx)(`th`,{className:`px-4 py-2 text-right text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:s(`forecast.actions`)})]})}),(0,G.jsx)(`tbody`,{className:`divide-y divide-bambu-dark-tertiary`,children:e.map(e=>{let t=[e.brand,e.material,e.subtype,e.color_name].filter(Boolean).join(` `),i=m.some(t=>t.item.id===e.id),o=f.get(s9(e.material,e.subtype,e.brand,e.color_name))??null,c=o&&o.totalSpools>0?o.totalLabelG/o.totalSpools:1e3,l=Math.round(e.quantity_spools*c),u=o?.effectiveLeadTimeDays??n??0,p=u>0?c9(new Date,u):null,h=e.status===`purchased`||e.status===`received`,g=e.status===`received`,_=d.isPending;return(0,G.jsxs)(`tr`,{className:`hover:bg-bambu-dark-tertiary/30 transition-colors ${i&&!h?`bg-red-500/5`:``}`,children:[(0,G.jsx)(`td`,{className:`px-4 py-2.5`,children:(0,G.jsxs)(`span`,{className:`text-sm font-semibold text-bambu-green`,children:[e.quantity_spools,`×`]})}),(0,G.jsx)(`td`,{className:`px-4 py-2.5`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-white`,children:t}),i&&!h&&(0,G.jsx)(Iu,{className:`w-3.5 h-3.5 text-red-600 dark:text-red-400 flex-shrink-0`,"aria-label":s(`forecast.stockBreakBefore`)})]})}),(0,G.jsx)(`td`,{className:`px-4 py-2.5`,children:(0,G.jsx)(`span`,{className:`text-sm text-white`,children:l>=1e3?`${(l/1e3).toFixed(1)}kg`:`${l}g`})}),(0,G.jsx)(`td`,{className:`px-4 py-2.5`,children:(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:u>0?`${u}d`:`—`})}),(0,G.jsx)(`td`,{className:`px-4 py-2.5`,children:(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:p?l9(p):`—`})}),(0,G.jsx)(`td`,{className:`px-4 py-2.5`,children:(0,G.jsx)(`span`,{className:`inline-flex items-center px-2 py-0.5 rounded text-xs font-medium ${g?`bg-bambu-green/20 text-bambu-green`:h?`bg-blue-100 dark:bg-blue-400/20 text-blue-700 dark:text-blue-400`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:s(g?`forecast.received`:h?`forecast.purchased`:`forecast.pending`)})}),(0,G.jsx)(`td`,{className:`px-4 py-2.5`,children:(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:e.note||`—`})}),(0,G.jsx)(`td`,{className:`px-4 py-2.5`,children:(0,G.jsx)(`div`,{className:`flex items-center justify-end gap-1`,children:r&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`button`,{onClick:()=>d.mutate({id:e.id,status:h?`pending`:`purchased`}),disabled:_||g,title:s(h?`forecast.resetToPending`:`forecast.markPurchased`),className:`p-1.5 rounded transition-colors disabled:opacity-30 ${h?`text-blue-600 dark:text-blue-400 hover:text-blue-700 dark:hover:text-blue-300`:`text-blue-600/50 dark:text-blue-400/50 hover:text-blue-600 dark:hover:text-blue-400`}`,children:h?(0,G.jsx)(Ul,{className:`w-4 h-4`}):(0,G.jsx)(eee,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>d.mutate({id:e.id,status:`received`,item:e,avgSpoolG:c}),disabled:_||!h||g,title:s(`forecast.markReceived`),className:`p-1.5 rounded transition-colors text-bambu-green/50 hover:text-bambu-green disabled:opacity-30`,children:(0,G.jsx)(bl,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>a(e.id),className:`p-1 text-bambu-gray hover:text-red-600 dark:hover:text-red-400 transition-colors`,title:s(`forecast.remove`),children:(0,G.jsx)(Nu,{className:`w-3.5 h-3.5`})})]})})})]},e.id)})})]})}):(0,G.jsx)(`div`,{className:`divide-y divide-bambu-dark-tertiary`,children:p.filter(({item:e})=>e.status!==`received`).map(({item:e,forecast:t})=>(0,G.jsx)(f1e,{item:e,forecast:t,globalLeadTime:n,canWrite:r,onRemove:()=>a(e.id)},e.id))})]})}function f1e({item:e,forecast:t,globalLeadTime:n,canWrite:r,onRemove:i}){let{t:a}=U(),o=[e.brand,e.material,e.subtype,e.color_name].filter(Boolean).join(` `),s=(0,y.useMemo)(()=>{if(!t||t.dailyRateG===null||t.dailyRateG<=0)return null;let n=t.dailyRateG,r=t.effectiveLeadTimeDays,i=t.totalSpools>0?t.totalLabelG/t.totalSpools:1e3,a=e.quantity_spools*i,o=Math.max(0,t.totalRemainingG-n*r),s=o+a,c=Math.ceil(s/n),l=Math.min(r+c+5,365),u=[];for(let e=0;e<=l;e++){let i=u9(c9(new Date,e));if(e===r)u.push({day:e,label:i,stock:Math.round(o),rop:Math.round(t.reorderPointG),safetyStock:Math.round(t.safetyStockG)}),u.push({day:e,label:i,stock:Math.round(s),rop:Math.round(t.reorderPointG),safetyStock:Math.round(t.safetyStockG),arrival:!0});else{let a=e<r?Math.max(0,t.totalRemainingG-n*e):Math.max(0,s-n*(e-r));u.push({day:e,label:i,stock:Math.round(a),rop:Math.round(t.reorderPointG),safetyStock:Math.round(t.safetyStockG)})}}return{points:u,lt:r,maxDays:l,arrivalG:a,peakG:s,stockAtArrival:o}},[t,e.quantity_spools]),c=(0,y.useMemo)(()=>{if(!t||t.dailyRateG===null||t.dailyRateG<=0)return null;let e=Math.floor(t.totalRemainingG/t.dailyRateG);return e<t.effectiveLeadTimeDays?e:null},[t]),l=c!==null;return(0,G.jsxs)(`div`,{className:`px-4 py-4 ${l?`bg-red-500/5`:``}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 min-w-0`,children:[l?(0,G.jsx)(Iu,{className:`w-4 h-4 text-red-600 dark:text-red-400 flex-shrink-0`}):(0,G.jsx)(fs,{className:`w-4 h-4 text-bambu-green/60 flex-shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm font-medium text-white truncate`,children:o}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray flex-shrink-0`,children:[a(`forecast.spoolCount`,{count:e.quantity_spools}),` ordered`]})]}),r&&(0,G.jsx)(`button`,{onClick:i,className:`p-1 text-bambu-gray hover:text-red-600 dark:hover:text-red-400 transition-colors flex-shrink-0`,children:(0,G.jsx)(Nu,{className:`w-3.5 h-3.5`})})]}),l&&(0,G.jsxs)(`div`,{className:`mb-3 px-3 py-2 rounded-lg bg-red-50 dark:bg-red-500/10 border border-red-200 dark:border-red-500/20 text-xs text-red-700 dark:text-red-300`,children:[(0,G.jsx)(`span`,{className:`font-medium`,children:a(`forecast.stockBreakIn`,{days:c})}),` `,a(`forecast.stockRunsOutBefore`,{lt:t.effectiveLeadTimeDays}),t.dailyRateG!==null&&(0,G.jsxs)(`span`,{children:[` `,a(`forecast.atRate`,{rate:t.dailyRateG.toFixed(1)}),` `,(0,G.jsx)(`span`,{className:`font-semibold`,children:a(`forecast.moreSpools`,{count:Math.ceil((t.dailyRateG*t.effectiveLeadTimeDays-t.totalRemainingG)/(t.totalLabelG/(t.totalSpools||1)||1e3))})}),` `,a(`forecast.bridgeGap`)]})]}),!t||t.dailyRateG===null?(0,G.jsx)(`div`,{className:`py-4 text-center text-xs text-bambu-gray`,children:a(`forecast.noUsageData`)}):s?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-5 gap-2 mb-3`,children:[(0,G.jsxs)(`div`,{className:`bg-bambu-dark-tertiary/40 rounded-lg px-2.5 py-2 text-center`,children:[(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mb-0.5`,children:a(`forecast.stock`)}),(0,G.jsxs)(`div`,{className:`text-sm font-semibold text-white`,children:[Math.round(t.totalRemainingG),`g`]})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark-tertiary/40 rounded-lg px-2.5 py-2 text-center`,children:[(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mb-0.5`,children:a(`forecast.leadTime`)}),(0,G.jsxs)(`div`,{className:`text-sm font-semibold text-white`,children:[t.effectiveLeadTimeDays,`d`]}),(0,G.jsxs)(`div`,{className:`text-[10px] text-bambu-gray/60`,children:[`max(g:`,n,`, sku:`,t.settings?.lead_time_days??0,`)`]})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark-tertiary/40 rounded-lg px-2.5 py-2 text-center`,children:[(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mb-0.5`,children:a(`forecast.safetyMarginLabel`)}),(0,G.jsxs)(`div`,{className:`text-sm font-semibold text-white`,children:[Math.round(t.safetyStockG),`g`]})]}),(0,G.jsxs)(`div`,{className:`rounded-lg px-2.5 py-2 text-center ${l?`bg-red-100 dark:bg-red-500/15`:`bg-bambu-dark-tertiary/40`}`,children:[(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mb-0.5`,children:a(`forecast.daysLeft`)}),(0,G.jsxs)(`div`,{className:`text-sm font-semibold ${l?`text-red-700 dark:text-red-400`:`text-green-700 dark:text-green-400`}`,children:[t.daysRemaining??`—`,`d`]})]}),s&&(0,G.jsxs)(`div`,{className:`bg-bambu-green/15 rounded-lg px-2.5 py-2 text-center`,children:[(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mb-0.5`,children:a(`forecast.onArrival`)}),(0,G.jsxs)(`div`,{className:`text-sm font-semibold text-bambu-green`,children:[Math.round(s.arrivalG),`g`]}),(0,G.jsxs)(`div`,{className:`text-[10px] text-bambu-gray/60`,children:[`+`,a(`forecast.spoolCount`,{count:e.quantity_spools})]})]})]}),(0,G.jsx)(lA,{width:`100%`,height:180,children:(0,G.jsxs)(pU,{data:s.points,margin:{top:8,right:8,bottom:0,left:0},children:[(0,G.jsxs)(`defs`,{children:[(0,G.jsxs)(`linearGradient`,{id:`cart-pre-${e.id}`,x1:`0`,y1:`0`,x2:`0`,y2:`1`,children:[(0,G.jsx)(`stop`,{offset:`5%`,stopColor:l?`#EF4444`:`#1DB954`,stopOpacity:.25}),(0,G.jsx)(`stop`,{offset:`95%`,stopColor:l?`#EF4444`:`#1DB954`,stopOpacity:.02})]}),(0,G.jsxs)(`linearGradient`,{id:`cart-post-${e.id}`,x1:`0`,y1:`0`,x2:`0`,y2:`1`,children:[(0,G.jsx)(`stop`,{offset:`5%`,stopColor:`#1DB954`,stopOpacity:.3}),(0,G.jsx)(`stop`,{offset:`95%`,stopColor:`#1DB954`,stopOpacity:.03})]})]}),(0,G.jsx)(yV,{strokeDasharray:`3 3`,stroke:`#374151`,strokeOpacity:.4}),(0,G.jsx)(CH,{dataKey:`label`,tick:{fill:`#6B7280`,fontSize:9},interval:Math.max(0,Math.ceil(s.maxDays/6)-1),axisLine:!1,tickLine:!1}),(0,G.jsx)(OH,{tick:{fill:`#6B7280`,fontSize:9},axisLine:!1,tickLine:!1,tickFormatter:e=>e>=1e3?`${(e/1e3).toFixed(1)}kg`:`${e}g`,width:44}),(0,G.jsx)(tz,{contentStyle:{background:`#1a1a2e`,border:`1px solid #374151`,borderRadius:8,fontSize:11},labelStyle:{color:`#9CA3AF`},formatter:(e,t)=>typeof e==`number`?t===`stock`?`${e}g — ${a(`forecast.stock`)}`:t===`rop`?`${e}g — ${a(`forecast.reorderPoint`)}`:t===`safetyStock`?`${e}g — ${a(`forecast.safetyMarginLabel`)}`:`${e}`:``}),(0,G.jsx)(tH,{type:`linear`,dataKey:`stock`,stroke:`#1DB954`,strokeWidth:2,fill:`url(#cart-post-${e.id})`,dot:!1,activeDot:{r:3}}),t.reorderPointG>0&&(0,G.jsx)(rV,{y:t.reorderPointG,stroke:`#F59E0B`,strokeDasharray:`5 3`,strokeOpacity:.8,label:{value:`ROP`,position:`insideTopRight`,fill:`#F59E0B`,fontSize:9}}),t.safetyStockG>0&&(0,G.jsx)(rV,{y:t.safetyStockG,stroke:`#6B7280`,strokeDasharray:`3 3`,strokeOpacity:.6,label:{value:`SS`,position:`insideTopRight`,fill:`#6B7280`,fontSize:9}}),(0,G.jsx)(rV,{x:u9(c9(new Date,s.lt)),stroke:`#3B82F6`,strokeWidth:1.5,strokeDasharray:`4 3`,strokeOpacity:.9,label:{value:`+${s.arrivalG>=1e3?`${(s.arrivalG/1e3).toFixed(1)}kg`:`${Math.round(s.arrivalG)}g`} arrives (d${s.lt})`,position:`insideTopLeft`,fill:`#3B82F6`,fontSize:9}}),c!==null&&(0,G.jsx)(rV,{x:u9(c9(new Date,c)),stroke:`#EF4444`,strokeWidth:1.5,strokeOpacity:.9,label:{value:`OUT`,position:`insideTopLeft`,fill:`#EF4444`,fontSize:9}})]})}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-3 mt-2 text-[10px] text-bambu-gray`,children:[(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`span`,{className:`inline-block w-4 border-t-2 border-yellow-400 border-dashed`}),` `,a(`forecast.ropLabel`)]}),(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`span`,{className:`inline-block w-4 border-t border-bambu-gray border-dashed`}),` `,a(`forecast.safetyStockLegend`)]}),(0,G.jsxs)(`span`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`span`,{className:`inline-block w-4 border-t-2 border-blue-400 border-dashed`}),` `,a(`forecast.stockArrivalLegend`)]}),l&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1 text-red-700 dark:text-red-400`,children:[(0,G.jsx)(`span`,{className:`inline-block w-4 border-t-2 border-red-400`}),` `,a(`forecast.stockoutLegend`)]})]})]}):null]})}function p1e({forecast:e,onClose:t,onAdd:n}){let{t:r}=U(),i=[e.group.brand,e.group.material,e.group.subtype,e.group.colorName].filter(Boolean).join(` `),[a,o]=(0,y.useState)(`qty`),[s,c]=(0,y.useState)(`1`),[l,u]=(0,y.useState)(`30`),[d,f]=(0,y.useState)(``),p=(0,y.useMemo)(()=>{if(!e.dailyRateG||e.dailyRateG<=0)return null;let t=e.dailyRateG*Number(l),n=e.group.spools.length>0?e.group.spools.reduce((e,t)=>e+t.label_weight,0)/e.group.spools.length:1e3;return Math.ceil(t/n)},[e,l]),m=a===`qty`?parseInt(s,10)||1:p??1;function h(t){t.preventDefault(),n({material:e.group.material,subtype:e.group.subtype,brand:e.group.brand,color_name:e.group.colorName,quantity_spools:m,note:d||null})}return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/60 backdrop-blur-sm p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-2xl border border-bambu-dark-tertiary w-full max-w-sm shadow-2xl`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-5 pt-5 pb-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(su,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-base font-semibold text-white`,children:r(`forecast.addToCartTitle`)})]}),(0,G.jsx)(`button`,{onClick:t,className:`p-1 text-bambu-gray hover:text-white transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`form`,{onSubmit:h,className:`p-5 space-y-4`,children:[(0,G.jsx)(`div`,{className:`text-sm text-bambu-gray`,children:i}),(0,G.jsxs)(`div`,{className:`flex bg-bambu-dark-tertiary rounded-lg p-0.5`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>o(`qty`),className:`flex-1 py-1.5 text-xs font-medium rounded-md transition-colors ${a===`qty`?`bg-bambu-dark-secondary text-white shadow`:`text-bambu-gray hover:text-white`}`,children:r(`forecast.byQuantity`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>o(`duration`),className:`flex-1 py-1.5 text-xs font-medium rounded-md transition-colors ${a===`duration`?`bg-bambu-dark-secondary text-white shadow`:`text-bambu-gray hover:text-white`}`,children:r(`forecast.byDuration`)})]}),a===`qty`?(0,G.jsxs)(`div`,{className:`space-y-1.5`,children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray`,children:r(`forecast.numberOfSpools`)}),(0,G.jsx)(`input`,{type:`number`,min:1,max:99,value:s,onChange:e=>c(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`,autoFocus:!0})]}):(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`space-y-1.5`,children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray`,children:r(`forecast.lastHowManyDays`)}),(0,G.jsx)(`input`,{type:`number`,min:1,max:365,value:l,onChange:e=>u(e.target.value),className:`w-full px-3 py-2 bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`,autoFocus:!0})]}),e.dailyRateG===null?(0,G.jsx)(`div`,{className:`text-xs text-yellow-700 dark:text-yellow-400 px-1`,children:r(`forecast.noUsageQty`)}):(0,G.jsxs)(`div`,{className:`flex items-center gap-2 px-3 py-2 bg-bambu-dark-tertiary/50 rounded-lg`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`≈`}),(0,G.jsx)(`span`,{className:`text-sm font-semibold text-bambu-green`,children:r(`forecast.spoolCount`,{count:p??0})}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray`,children:[`at `,e.dailyRateG.toFixed(1),`g/day`]})]})]}),(0,G.jsxs)(`div`,{className:`space-y-1.5`,children:[(0,G.jsx)(`label`,{className:`text-xs text-bambu-gray`,children:r(`forecast.noteOptional`)}),(0,G.jsx)(`input`,{type:`text`,maxLength:200,value:d,onChange:e=>f(e.target.value),placeholder:r(`forecast.notePlaceholder`),className:`w-full px-3 py-2 bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/40 focus:outline-none focus:border-bambu-green`})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3 pt-1`,children:[(0,G.jsx)(`button`,{type:`submit`,className:`flex-1 py-2 bg-bambu-green text-white text-sm font-medium rounded-lg hover:bg-bambu-green/80 transition-colors`,children:r(`forecast.addNSpools`,{count:m})}),(0,G.jsx)(`button`,{type:`button`,onClick:t,className:`px-4 py-2 text-sm text-bambu-gray hover:text-white border border-bambu-dark-tertiary rounded-lg transition-colors`,children:r(`forecast.cancel`)})]})]})]})})}var f9={material:``,subtype:``,brand:``,color_name:``,rgba:`808080FF`,extra_colors:``,effect_type:``,label_weight:1e3,core_weight:250,core_weight_catalog_id:null,weight_used:0,slicer_filament:``,note:``,cost_per_kg:null,category:``,low_stock_threshold_pct:null,location_id:null,spoolman_filament_id:null},m1e=new Set([`material`,`subtype`,`brand`,`rgba`,`color_name`,`label_weight`]);function h1e(e,t=!1,n=!1,r=`create`){let i={};return t||n||r!==`create`?(!e.material&&!e.spoolman_filament_id&&(i.material=`Material is required`),{isValid:Object.keys(i).length===0,errors:i}):(e.slicer_filament||(i.slicer_filament=`Slicer preset is required`),e.material||(i.material=`Material is required`),e.brand||(i.brand=`Brand is required`),e.subtype||(i.subtype=`Subtype is required`),{isValid:Object.keys(i).length===0,errors:i})}var g1e={local:`bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-400`,orca_cloud:`bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-400`,cloud:`bg-bambu-blue/20 text-bambu-blue`,builtin:`bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400`};function p9({source:e}){let{t}=U(),n={local:t(`profiles.localProfiles.badge`),orca_cloud:t(`configureAmsSlot.orcaCloud`),cloud:t(`configureAmsSlot.bambuCloud`),builtin:t(`configureAmsSlot.builtin`)}[e];return(0,G.jsx)(`span`,{className:`text-[10px] px-1.5 py-0.5 rounded whitespace-nowrap ${g1e[e]}`,children:n})}function _1e({value:e,options:t,inheritLabel:n,onChange:r,disabled:i=!1,ariaLabel:a}){let{t:o}=U(),[s,c]=(0,y.useState)(!1),[l,u]=(0,y.useState)(``),d=(0,y.useRef)(null),f=t.find(t=>t.code===e);(0,y.useEffect)(()=>{if(!s)return;let e=e=>{d.current&&!d.current.contains(e.target)&&c(!1)},t=e=>{e.key===`Escape`&&(e.stopPropagation(),c(!1))};return document.addEventListener(`mousedown`,e),document.addEventListener(`keydown`,t,!0),()=>{document.removeEventListener(`mousedown`,e),document.removeEventListener(`keydown`,t,!0)}},[s]);let p=l.trim().toLowerCase(),m=p?t.filter(e=>e.displayName.toLowerCase().includes(p)):t,h=e=>{r(e),c(!1),u(``)};return(0,G.jsxs)(`div`,{className:`relative`,ref:d,children:[(0,G.jsxs)(`button`,{type:`button`,"aria-label":a,"aria-haspopup":`listbox`,"aria-expanded":s,disabled:i,onClick:()=>c(e=>!e),className:`w-full flex items-center gap-2 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-sm text-left focus:outline-none focus:border-bambu-green disabled:opacity-50`,children:[(0,G.jsx)(`span`,{className:`flex-1 min-w-0 truncate ${f?`text-white`:`text-bambu-gray italic`}`,children:f?f.displayName:n}),f&&(0,G.jsx)(p9,{source:f.source}),(0,G.jsx)(ps,{className:`w-3.5 h-3.5 text-bambu-gray shrink-0`})]}),s&&(0,G.jsxs)(`div`,{className:`absolute z-50 mt-1 w-full bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl`,children:[(0,G.jsx)(`div`,{className:`p-2 border-b border-bambu-dark-tertiary`,children:(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`w-3.5 h-3.5 text-bambu-gray absolute left-2 top-1/2 -translate-y-1/2`}),(0,G.jsx)(`input`,{autoFocus:!0,type:`text`,value:l,onChange:e=>u(e.target.value),placeholder:o(`inventory.searchPresets`),className:`w-full pl-7 pr-7 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded-md text-sm text-white placeholder:text-bambu-gray/60 focus:outline-none focus:border-bambu-green`}),l&&(0,G.jsx)(`button`,{type:`button`,"aria-label":o(`common.clear`),onClick:()=>u(``),className:`absolute right-2 top-1/2 -translate-y-1/2 text-bambu-gray hover:text-white`,children:(0,G.jsx)(td,{className:`w-3.5 h-3.5`})})]})}),(0,G.jsxs)(`div`,{className:`max-h-56 overflow-y-auto p-1`,role:`listbox`,"aria-label":a,children:[(0,G.jsx)(`button`,{type:`button`,role:`option`,"aria-selected":!f,onClick:()=>h(null),className:`w-full text-left px-2 py-1.5 rounded-md text-sm italic ${f?`text-bambu-gray hover:bg-bambu-dark`:`bg-bambu-green/15 text-bambu-green`}`,children:n}),m.length===0?(0,G.jsx)(`p`,{className:`px-2 py-2 text-sm text-bambu-gray`,children:o(`inventory.noResults`)}):m.map(t=>(0,G.jsxs)(`button`,{type:`button`,role:`option`,"aria-selected":t.code===e,onClick:()=>h(t),className:`w-full flex items-center gap-2 text-left px-2 py-1.5 rounded-md text-sm ${t.code===e?`bg-bambu-green/15 text-bambu-green`:`text-white hover:bg-bambu-dark`}`,children:[(0,G.jsx)(`span`,{className:`flex-1 min-w-0 truncate`,title:t.displayName,children:t.displayName}),(0,G.jsx)(p9,{source:t.source})]},t.code))]})]})]})}function v1e(e,t){if(t.length===0)return{top:[],rest:e};let n=new Set(t.map(e=>e.toLowerCase()));return{top:e.filter(e=>n.has(e.toLowerCase())),rest:e.filter(e=>!n.has(e.toLowerCase()))}}function m9({label:e}){return(0,G.jsx)(`div`,{className:`px-3 py-1 text-[11px] font-semibold uppercase tracking-wide text-bambu-gray/70 bg-bambu-dark-tertiary/40`,children:e})}function y1e({formData:e,updateField:t,cloudAuthenticated:n,loadingCloudPresets:r,presetInputValue:i,setPresetInputValue:a,selectedPresetOption:o,filamentOptions:s,availableBrands:c,availableMaterials:l,suggestedBrands:u,suggestedMaterials:d,quickAdd:f,detailsRequired:p,quantity:m,onQuantityChange:h,errors:g}){let{t:_}=U(),[v,b]=(0,y.useState)(!1),[x,S]=(0,y.useState)(!1),[C,w]=(0,y.useState)(!1),[T,E]=(0,y.useState)(!1),[D,O]=(0,y.useState)(``),[k,A]=(0,y.useState)(``),[j,M]=(0,y.useState)(``),[N,P]=(0,y.useState)(String(e.label_weight)),[F,I]=(0,y.useState)(!1),[L,R]=(0,y.useState)(new Set),z=(0,y.useRef)(null),B=(0,y.useRef)(null),V=(0,y.useRef)(null),ee=(0,y.useRef)(null);(0,y.useEffect)(()=>{let e=e=>{z.current&&!z.current.contains(e.target)&&b(!1),ee.current&&!ee.current.contains(e.target)&&E(!1),B.current&&!B.current.contains(e.target)&&S(!1),V.current&&!V.current.contains(e.target)&&w(!1)};return document.addEventListener(`mousedown`,e),()=>document.removeEventListener(`mousedown`,e)},[]);let te=(0,y.useMemo)(()=>{if(!i)return s;let e=i.toLowerCase();return s.filter(t=>t.displayName.toLowerCase().includes(e)||t.code.toLowerCase().includes(e))},[s,i]),ne=(0,y.useMemo)(()=>{if(!D)return c;let e=D.toLowerCase();return c.filter(t=>t.toLowerCase().includes(e)).sort((t,n)=>{let r=t.toLowerCase()===e,i=n.toLowerCase()===e;return r&&!i?-1:!r&&i?1:t.localeCompare(n)})},[c,D]),re=(0,y.useMemo)(()=>{if(!k)return VU;let e=k.toLowerCase();return VU.filter(t=>t.toLowerCase().includes(e))},[k]),ie=(0,y.useMemo)(()=>{if(!j)return l;let e=j.toLowerCase();return l.filter(t=>t.toLowerCase().includes(e)).sort((t,n)=>{let r=t.toLowerCase()===e,i=n.toLowerCase()===e;return r&&!i?-1:!r&&i?1:t.localeCompare(n)})},[j,l]),ae=(0,y.useMemo)(()=>v1e(ne,u),[ne,u]),oe=(0,y.useMemo)(()=>v1e(ie,d),[ie,d]);(0,y.useEffect)(()=>{F||P(String(e.label_weight))},[e.label_weight,F]);let se=n=>{t(`slicer_filament`,n.code),a(n.displayName),b(!1);let r=qU(n.name),i=new Set,o=[[`material`,r.material],[`brand`,r.brand],[`subtype`,r.variant]];for(let[n,r]of o)r&&(e[n]&&!L.has(n)||(t(n,r),i.add(n)));R(i)},H=(e,n)=>{L.has(e)&&R(t=>{let n=new Set(t);return n.delete(e),n}),t(e,n)},ce=t=>(0,G.jsx)(`button`,{type:`button`,className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary ${e.brand===t?`bg-bambu-green/10 text-bambu-green`:`text-white`}`,onClick:()=>{H(`brand`,t),S(!1),O(``)},children:t},t),le=t=>(0,G.jsx)(`button`,{type:`button`,className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary ${e.material===t?`bg-bambu-green/10 text-bambu-green`:`text-white`}`,onClick:()=>{H(`material`,t),E(!1),M(``)},children:t},t);return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[!f&&(0,G.jsx)(`div`,{className:`flex items-center gap-2 text-xs text-bambu-gray`,children:r?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-3 h-3 animate-spin`}),` `,_(`inventory.loadingPresets`)]}):n?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ps,{className:`w-3 h-3 text-bambu-green`}),` `,_(`inventory.cloudConnected`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ms,{className:`w-3 h-3`}),` `,_(`inventory.cloudNotConnected`)]})}),!f&&(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:[_(`inventory.slicerPreset`),p&&` *`]}),(0,G.jsxs)(`div`,{className:`relative`,ref:z,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray/50 pointer-events-none`}),(0,G.jsx)(`input`,{type:`text`,className:`w-full pl-9 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`,placeholder:_(`inventory.searchPresets`),value:i,onChange:e=>{a(e.target.value),b(!0)},onFocus:()=>{b(!0),a(``)}}),v&&(0,G.jsx)(`div`,{className:`absolute z-50 w-full mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg max-h-64 overflow-y-auto`,children:te.length===0?(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:_(`inventory.noPresetsFound`)}):te.map(e=>(0,G.jsxs)(`button`,{type:`button`,className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex items-center gap-2 ${o?.code===e.code?`bg-bambu-green/10 text-bambu-green`:`text-white`}`,onClick:()=>se(e),children:[(0,G.jsx)(`span`,{className:`flex-1 min-w-0 truncate`,title:e.displayName,children:e.displayName}),(0,G.jsx)(p9,{source:e.source})]},`${e.code}::${e.name}`))})]}),o&&(0,G.jsxs)(`div`,{className:`mt-1 text-xs text-bambu-gray`,children:[_(`inventory.selectedPreset`),`: `,(0,G.jsx)(`span`,{className:`font-mono text-bambu-green`,children:o.code})]}),g?.slicer_filament&&(0,G.jsx)(`p`,{className:`mt-1 text-xs text-red-700 dark:text-red-400`,children:g.slicer_filament})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:[_(`inventory.material`),` *`]}),(0,G.jsxs)(`div`,{className:`relative`,ref:ee,children:[(0,G.jsx)(`input`,{type:`text`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`,placeholder:_(`inventory.selectMaterial`),value:T?j:e.material,onChange:e=>{M(e.target.value),E(!0)},onFocus:()=>{E(!0),M(``)}}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray/50 pointer-events-none`}),T&&(0,G.jsxs)(`div`,{className:`absolute z-50 w-full mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg max-h-48 overflow-y-auto`,children:[ie.length===0?(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:_(`inventory.noResults`)}):(0,G.jsxs)(G.Fragment,{children:[oe.top.length>0&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(m9,{label:_(`inventory.suggestedOptions`)}),oe.top.map(le)]}),oe.rest.length>0&&(0,G.jsxs)(G.Fragment,{children:[oe.top.length>0&&(0,G.jsx)(m9,{label:_(`inventory.allOptions`)}),oe.rest.map(le)]})]}),j&&!ie.includes(j)&&(0,G.jsx)(`button`,{type:`button`,className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary text-bambu-green border-t border-bambu-dark-tertiary`,onClick:()=>{H(`material`,j),E(!1),M(``)},children:_(`inventory.useCustomMaterial`,{material:j})})]})]}),g?.material&&(0,G.jsx)(`p`,{className:`mt-1 text-xs text-red-700 dark:text-red-400`,children:g.material})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:[_(`inventory.brand`),p&&` *`]}),(0,G.jsxs)(`div`,{className:`relative`,ref:B,children:[(0,G.jsx)(`input`,{type:`text`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`,placeholder:_(`inventory.searchBrand`),value:x?D:e.brand,onChange:e=>{O(e.target.value),S(!0)},onFocus:()=>{S(!0),O(``)}}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray/50 pointer-events-none`}),x&&(0,G.jsxs)(`div`,{className:`absolute z-50 w-full mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg max-h-48 overflow-y-auto`,children:[ne.length===0?(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:_(`inventory.noResults`)}):(0,G.jsxs)(G.Fragment,{children:[ae.top.length>0&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(m9,{label:_(`inventory.suggestedOptions`)}),ae.top.map(ce)]}),ae.rest.length>0&&(0,G.jsxs)(G.Fragment,{children:[ae.top.length>0&&(0,G.jsx)(m9,{label:_(`inventory.allOptions`)}),ae.rest.map(ce)]})]}),D&&!ne.includes(D)&&(0,G.jsx)(`button`,{type:`button`,className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary text-bambu-green border-t border-bambu-dark-tertiary`,onClick:()=>{H(`brand`,D),S(!1),O(``)},children:_(`inventory.useCustomBrand`,{brand:D})})]})]}),g?.brand&&(0,G.jsx)(`p`,{className:`mt-1 text-xs text-red-700 dark:text-red-400`,children:g.brand})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:[_(`inventory.subtype`),p&&` *`]}),(0,G.jsxs)(`div`,{className:`relative`,ref:V,children:[(0,G.jsx)(`input`,{type:`text`,value:C?k:e.subtype,onChange:e=>{A(e.target.value),w(!0)},onFocus:()=>{w(!0),A(``)},placeholder:`Basic, Matte, Silk...`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray/50 pointer-events-none`}),C&&(0,G.jsxs)(`div`,{className:`absolute z-50 w-full mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg max-h-48 overflow-y-auto`,children:[re.length===0?(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:_(`inventory.noResults`)}):re.map(t=>(0,G.jsx)(`button`,{type:`button`,className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary ${e.subtype===t?`bg-bambu-green/10 text-bambu-green`:`text-white`}`,onClick:()=>{H(`subtype`,t),w(!1),A(``)},children:t},t)),k&&!VU.some(e=>e.toLowerCase()===k.toLowerCase().trim())&&(0,G.jsx)(`button`,{type:`button`,className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary text-bambu-green border-t border-bambu-dark-tertiary`,onClick:()=>{H(`subtype`,k),w(!1),A(``)},children:_(`inventory.useCustomBrand`,{brand:k})})]})]}),g?.subtype&&(0,G.jsx)(`p`,{className:`mt-1 text-xs text-red-700 dark:text-red-400`,children:g.subtype})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:_(`inventory.labelWeight`)}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`input`,{type:`number`,className:`w-full px-3 py-2 pr-7 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`,value:N,min:0,onFocus:()=>I(!0),onChange:e=>P(e.target.value),onBlur:()=>{I(!1);let n=N.trim(),r=Number(n);if(!n||!Number.isFinite(r)||r<0){P(String(e.label_weight));return}let i=Math.round(r);t(`label_weight`,i),P(String(i))}}),(0,G.jsx)(`span`,{className:`absolute right-2 top-1/2 -translate-y-1/2 text-xs text-bambu-gray`,children:`g`})]})]}),f&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:_(`inventory.quantity`)}),(0,G.jsx)(`input`,{type:`number`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`,value:m,min:1,max:100,onChange:e=>{h(Math.max(1,Math.min(100,parseInt(e.target.value)||1)))}})]})]})}function b1e(e){let t=e.split(/[\s,]+/).map(e=>e.trim().replace(/^#/,``)).filter(Boolean),n=[],r=[];for(let e of t)(e.length===6||e.length===8)&&/^[0-9a-fA-F]+$/.test(e)?n.push(e.toLowerCase()):r.push(e);return{value:n.join(`,`),invalid:r}}function x1e({formData:e,updateField:t,recentColors:n,onColorUsed:r,catalogColors:i}){let{t:a}=U(),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(``),u=(e.rgba.replace(`#`,``)+`FF`).substring(0,8).toUpperCase(),d=u.substring(0,6),f=u.substring(6,8)===`00`,[p,m]=(0,y.useState)(f?u:d);(0,y.useEffect)(()=>{m(f?u:d)},[d,u,f]);let h=e=>u===(e.replace(`#`,``)+`FF`).substring(0,8).toUpperCase(),g=e=>kf(e),_=(e,n,i,a)=>{let o=e.replace(`#`,``).toUpperCase();if(t(`rgba`,o.length===8?o:o+`FF`),t(`color_name`,n),i!==void 0){let e=i??``;w(e),E([]),D.current=e,t(`extra_colors`,e)}a!==void 0&&t(`effect_type`,a??``),r({name:n,hex:e})},v=(0,y.useMemo)(()=>{if(i.length===0)return[];let t=e.brand?.trim(),n=e.material?.toLowerCase().trim(),r=e.subtype?.toLowerCase().trim();if(!t&&!n)return[];let a=t?t.toLowerCase().split(/[\s\-_]+/).filter(e=>e.length>=2):[],o=e=>{if(a.length===0)return!0;let t=e.toLowerCase();return a.some(e=>t.includes(e))};if(t&&!n){let e=i.filter(e=>o(e.manufacturer));if(e.length>0)return e.map(e=>({name:e.color_name,hex:e.hex_color.replace(`#`,``).substring(0,6),manufacturer:e.manufacturer,material:typeof e.material==`string`?e.material:void 0,extra_colors:e.extra_colors??null,effect_type:e.effect_type??null}))}let s=n&&r?`${n} ${r}`:``;if(s){let e=i.filter(e=>o(e.manufacturer)&&e.material?.toLowerCase()===s);if(e.length>0)return e.map(e=>({name:e.color_name,hex:e.hex_color.replace(`#`,``).substring(0,6),manufacturer:e.manufacturer,material:typeof e.material==`string`?e.material:void 0,extra_colors:e.extra_colors??null,effect_type:e.effect_type??null}));let t=s.replace(/\+$/,``);if(t!==s){let e=i.filter(e=>o(e.manufacturer)&&e.material?.toLowerCase()===t);if(e.length>0)return e.map(e=>({name:e.color_name,hex:e.hex_color.replace(`#`,``).substring(0,6),manufacturer:e.manufacturer,material:typeof e.material==`string`?e.material:void 0}))}}if(n){let e=i.filter(e=>o(e.manufacturer)&&(!e.material||e.material.toLowerCase().startsWith(n)));if(e.length>0)return e.map(e=>({name:e.color_name,hex:e.hex_color.replace(`#`,``).substring(0,6),manufacturer:e.manufacturer,material:typeof e.material==`string`?e.material:void 0,extra_colors:e.extra_colors??null,effect_type:e.effect_type??null}))}return[]},[i,e.brand,e.material,e.subtype]),b=(0,y.useMemo)(()=>{if(!c)return v;if(v.length===0)return[];let e=c.toLowerCase();return v.filter(t=>t.name.toLowerCase().includes(e)||(t.manufacturer?.toLowerCase().includes(e)??!1)||(t.material?.toLowerCase().includes(e)??!1))},[c,v]),x=v.length>0,S=(0,y.useMemo)(()=>c?UU.filter(e=>e.name.toLowerCase().includes(c.toLowerCase())):o?UU:HU,[c,o]),[C,w]=(0,y.useState)(e.extra_colors),[T,E]=(0,y.useState)([]),D=(0,y.useRef)(e.extra_colors);(0,y.useEffect)(()=>{e.extra_colors!==D.current&&(w(e.extra_colors),E([]),D.current=e.extra_colors)},[e.extra_colors]);let O=(0,y.useMemo)(()=>CU({rgba:e.rgba,extraColors:e.extra_colors,effectType:e.effect_type,subtype:e.subtype,effectSize:`bar`}),[e.rgba,e.extra_colors,e.effect_type,e.subtype]),k=e=>{if(w(e),!e.trim()){E([]),D.current=``,t(`extra_colors`,``);return}let{value:n,invalid:r}=b1e(e);E(r),D.current=n,t(`extra_colors`,n)};return(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsx)(`div`,{className:`h-10 rounded-lg border border-bambu-dark-tertiary`,style:O,"data-testid":`color-preview-banner`}),n.length>0&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 text-xs text-bambu-gray shrink-0`,children:[(0,G.jsx)(js,{className:`w-3 h-3`}),(0,G.jsx)(`span`,{children:a(`inventory.recentColors`)})]}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1.5`,children:n.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>_(e.hex,e.name),className:`w-6 h-6 rounded border-2 transition-all hover:scale-110 ${h(e.hex)?`border-bambu-green ring-1 ring-bambu-green/30 scale-110`:`border-bambu-dark-tertiary`}`,style:g(e.hex),title:e.name},e.hex))})]}),(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray/50 pointer-events-none`}),(0,G.jsx)(`input`,{type:`text`,className:`w-full pl-9 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`,placeholder:a(`inventory.searchColors`),value:c,onChange:e=>l(e.target.value)})]}),x?(0,G.jsxs)(`div`,{className:`space-y-1.5`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:c?a(`inventory.searchResults`):`${e.brand}${e.material?` ${e.material}`:``}`}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-1.5`,children:[b.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>_(e.hex,e.name,e.extra_colors,e.effect_type),className:`w-6 h-6 rounded border-2 transition-all hover:scale-110 hover:z-20 relative group ${h(e.hex)?`border-bambu-green ring-1 ring-bambu-green/30 scale-110`:`border-bambu-dark-tertiary`}`,style:g(e.hex),title:e.manufacturer&&e.material?`${e.name} (${e.manufacturer} — ${e.material})`:e.manufacturer?`${e.name} (${e.manufacturer})`:e.name,children:(0,G.jsx)(`span`,{className:`absolute -bottom-7 left-1/2 -translate-x-1/2 px-2 py-0.5 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-xs whitespace-nowrap opacity-0 group-hover:opacity-100 transition-opacity pointer-events-none z-20 shadow-lg text-white`,children:e.manufacturer&&e.material?`${e.name} (${e.manufacturer} — ${e.material})`:e.manufacturer?`${e.name} (${e.manufacturer})`:e.name})},`${e.hex}-${e.name}-${e.manufacturer??``}`)),b.length===0&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray py-1`,children:a(`inventory.noColorsFound`)})]})]}):(0,G.jsxs)(`div`,{className:`space-y-1.5`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between text-xs text-bambu-gray`,children:[(0,G.jsx)(`span`,{children:a(c?`inventory.searchResults`:o?`inventory.allColors`:`inventory.commonColors`)}),!c&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>s(!o),className:`flex items-center gap-1 hover:text-white transition-colors`,children:o?(0,G.jsxs)(G.Fragment,{children:[a(`inventory.showLess`),` `,(0,G.jsx)(gs,{className:`w-3 h-3`})]}):(0,G.jsxs)(G.Fragment,{children:[a(`inventory.showAll`),` `,(0,G.jsx)(ps,{className:`w-3 h-3`})]})})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-1.5`,children:[S.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>_(e.hex,e.name),className:`w-6 h-6 rounded border-2 transition-all hover:scale-110 hover:z-20 relative group ${h(e.hex)?`border-bambu-green ring-1 ring-bambu-green/30 scale-110`:`border-bambu-dark-tertiary`}`,style:g(e.hex),title:e.name,children:(0,G.jsx)(`span`,{className:`absolute -bottom-7 left-1/2 -translate-x-1/2 px-2 py-0.5 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-xs whitespace-nowrap opacity-0 group-hover:opacity-100 transition-opacity pointer-events-none z-20 shadow-lg text-white`,children:e.name})},e.hex)),S.length===0&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray py-1`,children:a(`inventory.noColorsFound`)})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-3`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:a(`inventory.colorName`)}),(0,G.jsx)(`input`,{type:`text`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`,placeholder:a(`inventory.colorNamePlaceholder`),value:e.color_name,onChange:e=>t(`color_name`,e.target.value)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:a(`inventory.hexColor`)}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsx)(`span`,{className:`absolute left-3 top-1/2 -translate-y-1/2 text-bambu-gray`,children:`#`}),(0,G.jsx)(`input`,{type:`text`,className:`w-full pl-7 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm font-mono uppercase focus:outline-none focus:border-bambu-green`,placeholder:`RRGGBB`,value:p.toUpperCase(),onChange:e=>{let n=e.target.value.replace(`#`,``).replace(/[^0-9A-Fa-f]/g,``).toUpperCase(),r=n.length>8?n.substring(0,8):n;m(r),r.length===6?t(`rgba`,r+`FF`):r.length===8&&t(`rgba`,r)},onBlur:()=>{if(p.length===7){let e=p+`0`;m(e),t(`rgba`,e)}else if(p.length>0&&p.length<6){let e=p.padEnd(6,`0`);m(e),t(`rgba`,e+`FF`)}}})]}),(0,G.jsx)(`input`,{type:`color`,className:`w-11 h-[38px] rounded-lg cursor-pointer border border-bambu-dark-tertiary shrink-0 bg-transparent`,value:`#${d}`,onChange:e=>{t(`rgba`,e.target.value.replace(`#`,``).toUpperCase()+`FF`)},title:a(`inventory.pickColor`)})]})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 gap-3 pt-2 border-t border-bambu-dark-tertiary/50`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:a(`inventory.extraColorsLabel`)}),(0,G.jsx)(`input`,{type:`text`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm font-mono placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`,placeholder:a(`inventory.extraColorsPlaceholder`),value:C,onChange:e=>k(e.target.value),"data-testid":`extra-colors-input`}),T.length>0&&(0,G.jsx)(`p`,{className:`text-xs text-red-700 dark:text-red-400 mt-1`,children:a(`inventory.extraColorsInvalid`,{tokens:T.join(`, `)})}),!T.length&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/70 mt-1`,children:a(`inventory.extraColorsHint`)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1 flex items-center gap-1.5`,children:[(0,G.jsx)(gu,{className:`w-3.5 h-3.5`}),a(`inventory.colorEffectLabel`)]}),(0,G.jsxs)(`div`,{className:`flex gap-2 items-stretch`,children:[(0,G.jsx)(`select`,{className:`flex-1 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`,value:e.effect_type,onChange:e=>t(`effect_type`,e.target.value),"data-testid":`effect-type-select`,children:bU.map(e=>(0,G.jsx)(`option`,{value:e.value,children:a(e.labelKey)},e.value||`none`))}),(0,G.jsx)(AW,{rgba:e.rgba,extraColors:e.extra_colors,effectType:e.effect_type,subtype:e.subtype,effectSize:`preview`,className:`w-10 h-10`,shape:`square`})]})]})]})]})}function S1e({catalog:e,value:t,onChange:n,catalogId:r,onCatalogIdChange:i}){let{t:a}=U(),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(``),u=(0,y.useRef)(null),d=(0,y.useRef)(null);(0,y.useEffect)(()=>{let e=e=>{u.current&&!u.current.contains(e.target)&&s(!1)};return document.addEventListener(`mousedown`,e),()=>document.removeEventListener(`mousedown`,e)},[]),(0,y.useEffect)(()=>{if(e.length===0)return;let n=e.filter(e=>e.weight===t);if(r){let n=e.find(e=>e.id===r);if(n&&n.weight===t)return}n.length===1?i(n[0].id):n.length===0&&r!==null&&i(null)},[t,e,r,i]);let f=(0,y.useMemo)(()=>{if(!c)return e;let t=c.toLowerCase();return e.filter(e=>e.name.toLowerCase().includes(t)||e.weight.toString().includes(t))},[e,c]),p=(0,y.useMemo)(()=>e.filter(e=>e.weight===t),[e,t]),m=(0,y.useMemo)(()=>{if(o)return c;if(r){let t=e.find(e=>e.id===r);if(t)return t.name}return p.length>0?p[0].name:``},[o,c,r,e,p]);return(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:(0,G.jsxs)(`span`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(ql,{className:`w-3.5 h-3.5 text-bambu-gray`}),a(`inventory.coreWeight`)]})}),(0,G.jsxs)(`div`,{className:`flex gap-2 items-center`,children:[(0,G.jsxs)(`div`,{className:`flex-1 min-w-0 relative`,ref:u,children:[(0,G.jsx)(`input`,{ref:d,type:`text`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`,placeholder:a(`inventory.searchSpoolWeight`),value:m,onFocus:()=>{s(!0),l(``)},onChange:e=>{l(e.target.value),s(!0)}}),o&&(0,G.jsx)(`div`,{className:`absolute z-50 w-full mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg max-h-64 overflow-y-auto`,children:f.length===0?(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:a(`inventory.noResults`)}):f.map(e=>(0,G.jsxs)(`button`,{type:`button`,className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex justify-between items-center ${(r?e.id===r:e.weight===t)?`bg-bambu-green/10 text-bambu-green`:`text-white`}`,onClick:()=>{i(e.id),n(e.weight),s(!1),l(``)},children:[(0,G.jsx)(`span`,{className:`truncate`,children:e.name}),(0,G.jsxs)(`span`,{className:`font-mono text-xs text-bambu-gray ml-2 shrink-0`,children:[e.weight,`g`]})]},e.id))})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 shrink-0`,children:[(0,G.jsx)(`input`,{type:`number`,className:`w-16 px-2 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm text-center font-mono focus:outline-none focus:border-bambu-green`,value:t,min:0,max:2e3,onChange:e=>{let t=parseInt(e.target.value);!isNaN(t)&&t>=0&&n(t)}}),(0,G.jsx)(`span`,{className:`text-bambu-gray text-sm`,children:`g`})]})]})]})}function C1e({formData:e,updateField:t,spoolCatalog:n,currencySymbol:r,availableCategories:i,availableLocations:a=[],onCreateLocation:o,globalLowStockThreshold:s,spoolmanMode:c=!1}){let{t:l}=U(),{showToast:u}=Gd(),[d,f]=(0,y.useState)(``),[p,m]=(0,y.useState)(!1),[h,g]=(0,y.useState)(``),[_,v]=(0,y.useState)(!1),[b,x]=(0,y.useState)(``),[S,C]=(0,y.useState)(!1),w=Math.max(0,e.label_weight-e.weight_used),T=e.core_weight+w;return(0,y.useEffect)(()=>{p||f(String(T))},[p,T]),(0,y.useEffect)(()=>{_||g(String(w))},[_,w]),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 gap-x-4 gap-y-4`,children:[(0,G.jsx)(`div`,{className:`sm:col-span-2`,children:c?(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray px-1`,children:l(`inventory.spoolWeightManagedBySpoolman`)}):(0,G.jsx)(S1e,{catalog:n,value:e.core_weight,onChange:e=>t(`core_weight`,e),catalogId:e.core_weight_catalog_id,onCatalogIdChange:e=>t(`core_weight_catalog_id`,e)})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:l(`inventory.currentWeight`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsx)(`input`,{type:`number`,value:h,min:0,max:e.label_weight,onFocus:()=>v(!0),onChange:e=>{g(e.target.value)},onBlur:()=>{v(!1);let n=h.trim(),r=Number(n);if(!n||!Number.isFinite(r)||r<0||r>e.label_weight){g(String(w));return}let i=Math.round(r);t(`weight_used`,Math.max(0,e.label_weight-i)),g(String(i))},className:`w-full px-3 py-2 pr-7 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`}),(0,G.jsx)(`span`,{className:`absolute right-2 top-1/2 -translate-y-1/2 text-xs text-bambu-gray`,children:`g`})]}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray shrink-0`,children:[`/ `,e.label_weight,`g`]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:l(`inventory.measuredWeight`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsx)(`input`,{type:`number`,value:d,min:0,onFocus:()=>m(!0),onChange:e=>{f(e.target.value)},onBlur:()=>{m(!1);let n=d.trim(),r=Number(n),i=e.core_weight,a=e.core_weight+e.label_weight;if(!n||!Number.isFinite(r)||r<i||r>a){u(l(`inventory.measuredWeightError`,{min:i,max:a}),`error`),f(String(T));return}let o=Math.round(r),s=Math.max(0,Math.min(e.label_weight,o-e.core_weight));t(`weight_used`,Math.max(0,e.label_weight-s)),f(String(o))},className:`w-full px-3 py-2 pr-7 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`}),(0,G.jsx)(`span`,{className:`absolute right-2 top-1/2 -translate-y-1/2 text-xs text-bambu-gray`,children:`g`})]}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray shrink-0`,children:[`/ `,e.core_weight+e.label_weight,`g`]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:l(`inventory.costPerKg`,`Cost per kg`)}),(0,G.jsx)(`div`,{className:`flex items-center gap-2`,children:(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsx)(`span`,{className:`absolute left-3 top-1/2 -translate-y-1/2 text-bambu-gray text-sm pointer-events-none`,children:r}),(0,G.jsx)(`input`,{type:`number`,value:e.cost_per_kg??``,min:0,step:.01,placeholder:`0.00`,onChange:e=>{t(`cost_per_kg`,e.target.value===``?null:parseFloat(e.target.value))},style:{paddingLeft:`${Math.max(2,r.length*.6+1)}rem`},className:`w-full py-2 pr-3 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`})]})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,htmlFor:`spool-category`,children:l(`inventory.category`)}),(0,G.jsx)(`input`,{id:`spool-category`,type:`text`,list:`spool-category-options`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`,placeholder:l(`inventory.categoryPlaceholder`),value:e.category,maxLength:50,onChange:e=>t(`category`,e.target.value)}),i.length>0&&(0,G.jsx)(`datalist`,{id:`spool-category-options`,children:i.map(e=>(0,G.jsx)(`option`,{value:e},e))})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,htmlFor:`spool-low-stock-threshold`,children:l(`inventory.lowStockThresholdOverride`)}),(0,G.jsx)(`div`,{className:`flex items-center gap-2`,children:(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsx)(`input`,{id:`spool-low-stock-threshold`,type:`number`,className:`w-full px-3 py-2 pr-8 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`,placeholder:String(s),value:e.low_stock_threshold_pct??``,min:1,max:99,step:1,onChange:e=>{let n=e.target.value;if(n===``){t(`low_stock_threshold_pct`,null);return}let r=Number(n);Number.isFinite(r)&&t(`low_stock_threshold_pct`,Math.min(99,Math.max(1,Math.round(r))))}}),(0,G.jsx)(`span`,{className:`absolute right-3 top-1/2 -translate-y-1/2 text-xs text-bambu-gray pointer-events-none`,children:`%`})]})}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:l(`inventory.lowStockThresholdOverrideHelp`,{global:s})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,htmlFor:`spool-storage-location`,children:l(`inventory.storageLocation`)}),(0,G.jsxs)(`select`,{id:`spool-storage-location`,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green`,value:e.location_id??``,onChange:e=>{let n=e.target.value;if(!n){t(`location_id`,null);return}t(`location_id`,Number(n))},children:[(0,G.jsx)(`option`,{value:``,children:l(`inventory.storageLocationNone`)}),a.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))]}),o&&(0,G.jsxs)(`div`,{className:`mt-2 flex gap-2`,children:[(0,G.jsx)(`input`,{type:`text`,maxLength:255,className:`flex-1 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`,placeholder:l(`locations.createPlaceholder`),value:b,onChange:e=>x(e.target.value)}),(0,G.jsx)(`button`,{type:`button`,className:`px-3 py-2 text-sm rounded-lg bg-bambu-dark-tertiary text-white hover:bg-bambu-gray-dark disabled:opacity-50`,disabled:!b.trim()||S,onClick:async()=>{let e=b.trim();if(!(!e||!o)){C(!0);try{let n=await o(e);n&&(t(`location_id`,n.id),x(``))}finally{C(!1)}}},children:l(`locations.addShort`)})]})]}),(0,G.jsxs)(`div`,{className:`sm:col-span-2`,children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:l(`inventory.note`)}),(0,G.jsx)(`textarea`,{className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green resize-none min-h-[80px]`,placeholder:l(`inventory.notePlaceholder`),value:e.note,onChange:e=>t(`note`,e.target.value)})]})]})}function w1e({filaments:e,isLoading:t,selectedId:n,onSelect:r}){let{t:i}=U(),[a,o]=(0,y.useState)(!1),[s,c]=(0,y.useState)(``),l=(0,y.useRef)(null),u=(0,y.useRef)(null),d=(0,y.useMemo)(()=>e.find(e=>e.id===n)??null,[e,n]);(0,y.useEffect)(()=>{let e=e=>{l.current&&!l.current.contains(e.target)&&(o(!1),c(``))};return document.addEventListener(`mousedown`,e),()=>document.removeEventListener(`mousedown`,e)},[]);let f=(0,y.useMemo)(()=>{let t=s.toLowerCase().trim();return t?e.filter(e=>e.name.toLowerCase().includes(t)||(e.material?.toLowerCase().includes(t)??!1)||(e.vendor?.name.toLowerCase().includes(t)??!1)||(e.color_name?.toLowerCase().includes(t)??!1)):e},[e,s]);(0,y.useEffect)(()=>{a&&u.current?.focus()},[a]);let p=()=>{o(!0),c(``)},m=e=>{r(e),o(!1),c(``)};return(0,G.jsxs)(`div`,{ref:l,className:`relative`,children:[(0,G.jsx)(`label`,{className:`block text-sm font-medium text-bambu-gray mb-1`,children:i(`inventory.pickFromSpoolmanCatalog`)}),(0,G.jsxs)(`button`,{type:`button`,onClick:p,className:`w-full flex items-center gap-2 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-left focus:outline-none focus:border-bambu-green hover:border-bambu-gray transition-colors`,children:[t?(0,G.jsx)(Y,{className:`w-4 h-4 text-bambu-gray animate-spin shrink-0`}):d?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`span`,{className:`w-4 h-4 rounded-full shrink-0 border border-white/20`,style:kf(d.color_hex),"aria-label":i(`inventory.spoolmanFilamentColorSwatch`)}),(0,G.jsxs)(`span`,{className:`text-white text-sm truncate flex-1`,children:[d.vendor?.name?`${d.vendor.name} — `:``,d.name]})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Sl,{className:`w-4 h-4 text-bambu-gray shrink-0`}),(0,G.jsx)(`span`,{className:`text-bambu-gray text-sm flex-1`,children:i(`inventory.spoolmanFilamentCatalog`)})]}),(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray shrink-0 ml-auto`})]}),a&&(0,G.jsxs)(`div`,{className:`absolute z-50 w-full mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl`,children:[(0,G.jsx)(`div`,{className:`p-2 border-b border-bambu-dark-tertiary`,children:(0,G.jsx)(`input`,{ref:u,type:`text`,value:s,onChange:e=>c(e.target.value),placeholder:i(`inventory.pickFromSpoolmanCatalog`),className:`w-full px-2 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm placeholder-bambu-gray focus:outline-none focus:border-bambu-green`})}),(0,G.jsx)(`ul`,{className:`max-h-56 overflow-y-auto py-1`,children:t?(0,G.jsxs)(`li`,{className:`flex items-center justify-center gap-2 py-4 text-bambu-gray text-sm`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),(0,G.jsx)(`span`,{children:i(`common.loading`,`Loading…`)})]}):f.length===0?(0,G.jsx)(`li`,{className:`py-4 text-center text-bambu-gray text-sm`,children:i(`inventory.noSpoolmanFilaments`)}):f.map(e=>(0,G.jsx)(`li`,{children:(0,G.jsxs)(`button`,{type:`button`,onClick:()=>m(e),className:`w-full flex items-center gap-2 px-3 py-2 text-left hover:bg-bambu-dark-tertiary transition-colors ${e.id===n?`bg-bambu-dark-tertiary`:``}`,children:[(0,G.jsx)(`span`,{className:`w-4 h-4 rounded-full shrink-0 border border-white/20`,style:kf(e.color_hex),"aria-label":i(`inventory.spoolmanFilamentColorSwatch`)}),(0,G.jsxs)(`span`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`span`,{className:`block text-white text-sm truncate`,children:[e.vendor?.name?`${e.vendor.name} — `:``,e.name]}),(0,G.jsxs)(`span`,{className:`block text-bambu-gray text-xs truncate`,children:[[e.material,e.color_name].filter(Boolean).join(` · `),e.weight?` · ${e.weight}g`:``]})]})]})},e.id))})]})]})}function h9(e){let t=(e??``).trim().toUpperCase().slice(0,2);return t===`HH`||t===`HS`?t:null}function g9(e){return e?e===`HH`?`HF`:`S`:null}function T1e(e,t){let n=e.nozzles??[];return h9(n[(e.printer.nozzle_count??1)>1&&t>0?t:0]?.nozzle_type)??h9(n[0]?.nozzle_type)}function E1e(e){let t=new Set;for(let n of e.nozzles??[]){let e=(n?.nozzle_diameter??``).trim();e&&parseFloat(e)>0&&t.add(e)}for(let n of e.calibrations){let e=(n.nozzle_diameter??``).trim();e&&parseFloat(e)>0&&t.add(e)}return Array.from(t).sort((e,t)=>parseFloat(e)-parseFloat(t))}function D1e(e,t){return(e.printer.nozzle_count??1)>1?[{extruder:1,label:t.left},{extruder:0,label:t.right}]:[{extruder:0,label:t.single}]}function O1e({formData:e,printersWithCalibrations:t,filamentOptions:n,modelPresets:r,setModelPresets:i,selectedProfiles:a,setSelectedProfiles:o,selectedGroupId:s,setSelectedGroupId:c,printerModels:l,isLoading:u=!1}){let{t:d}=U(),f=(0,y.useMemo)(()=>{let e=new Map,n=[];for(let r of t){let t=(r.printer.model||``).trim();if(!t){n.push(r);continue}let i=e.get(t);i?i.push(r):e.set(t,[r])}return[...Array.from(e.entries()).map(([e,t])=>({id:`m:${e}`,model:e,printers:t,diameters:Array.from(new Set([...GU,...t.flatMap(E1e)])).sort((e,t)=>parseFloat(e)-parseFloat(t))})).sort((e,t)=>e.model.localeCompare(t.model)),...n.map(e=>({id:`p:${e.printer.id}`,model:``,printers:[e],diameters:Array.from(new Set([...GU,...E1e(e)])).sort((e,t)=>parseFloat(e)-parseFloat(t))}))]},[t]),p=f.find(e=>e.id===s)??f[0],m=(0,y.useMemo)(()=>{let e=new Map;return(t,r)=>{if(!t)return n;let i=e.get(t);if(i||(i=n.filter(e=>{let n=RU(e.name,l??{});return!n||AU(n,t)}),e.set(t,i)),r&&!i.some(e=>e.code===r)){let e=n.find(e=>e.code===r);if(e)return[e,...i]}return i}},[n,l]),h=[e.brand,e.material,e.subtype].map(e=>e.trim()).filter(Boolean).join(` `),g=/^[0-9A-Fa-f]{6,8}$/.test(e.rgba)?`#${e.rgba.slice(0,6)}`:`var(--bambu-gray, #808080)`,_=e=>D1e(e,{left:d(`inventory.leftNozzle`),right:d(`inventory.rightNozzle`),single:d(`inventory.nozzle`)}),v=t=>t.printer.connected?t.calibrations.filter(t=>aW(t,e)):[],b=e=>{let t=0;for(let n of e.printers){let r=v(n);for(let i of _(n))for(let o of e.diameters)r.some(e=>(e.extruder_id??0)===i.extruder&&((e.nozzle_diameter??``).trim()||`0.4`)===o)&&(a.get(rW(n.printer.id,i.extruder,o))||t++)}return t},x=(e,t,n)=>{i(r=>{let i=new Map(r),a=iW(e,t);return n?i.set(a,{code:n.code,name:n.name}):i.delete(a),i})},S=(e,t,n,r)=>{o(i=>{let a=new Map(i),o=rW(e,t,n);return r?a.set(o,r):a.delete(o),a})},C=()=>{let t=n.find(t=>t.code===e.slicer_filament);if(!t)return;let r=t.name.split(`@`)[0].trim().toLowerCase();r&&i(e=>{let t=new Map(e);for(let e of f){if(!e.model)continue;let n=m(e.model,void 0).filter(e=>e.name.toLowerCase().startsWith(r)&&RU(e.name,l??{})!==null);if(n.length!==0)for(let r of e.diameters){let i=n.find(e=>RegExp(`\\b${r.replace(`.`,`\\.`)}\\s*nozzle\\b`,`i`).test(e.name)),a=n.find(e=>!/\b[\d.]+\s*nozzle\b/i.test(e.name)),o=i??a;o&&t.set(iW(e.model,r),{code:o.code,name:o.name})}}return t})};if(t.length===0)return(0,G.jsx)(`div`,{className:`p-6 bg-bambu-dark rounded-lg text-center`,children:(0,G.jsxs)(`p`,{className:`text-bambu-gray flex items-center justify-center gap-2`,children:[u&&(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),d(u?`common.loading`:`inventory.noPrintersConfigured`)]})});let w=(e,t,n)=>{let i=iW(e,t),a=r.get(i),o=m(e,a?.code);return(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`div`,{className:`flex-1 min-w-0`,children:(0,G.jsx)(_1e,{ariaLabel:`${e} ${t}mm ${d(`inventory.filamentPreset`)}`,value:a?.code??``,options:o,inheritLabel:n,disabled:!e,onChange:n=>x(e,t,n)})}),(0,G.jsx)(`span`,{className:`text-[10px] font-semibold uppercase tracking-wide px-2 py-1 rounded-full shrink-0 ${a?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:d(a?`inventory.presetOverride`:`inventory.presetInherited`)})]})};return(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(h||e.color_name)&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2.5 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg`,children:[(0,G.jsx)(`span`,{className:`w-5 h-5 rounded-full border border-white/15 shrink-0`,style:{background:g},"aria-hidden":`true`}),h&&(0,G.jsx)(`span`,{className:`text-sm text-white truncate`,children:h}),e.color_name&&(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray truncate`,children:e.color_name})]}),(0,G.jsxs)(`div`,{className:`flex flex-col md:flex-row gap-4`,children:[(0,G.jsx)(`div`,{role:`tablist`,"aria-label":d(`inventory.printersTab`),"aria-orientation":`vertical`,className:`md:w-52 md:shrink-0 md:self-start md:sticky md:top-0 flex md:flex-col gap-1.5 overflow-x-auto md:overflow-x-visible`,children:f.map(e=>{let t=e===p,n=b(e);return(0,G.jsxs)(`button`,{type:`button`,role:`tab`,onClick:()=>c(e.id),"aria-selected":t,className:`flex items-center gap-2 px-3 py-2 rounded-lg border text-left transition-colors shrink-0 md:shrink ${t?`bg-bambu-green/10 border-bambu-green/40 text-white`:`bg-transparent border-transparent text-bambu-gray hover:bg-bambu-dark hover:text-white`}`,children:[(0,G.jsxs)(`div`,{className:`min-w-0 flex-1`,children:[(0,G.jsx)(`div`,{className:`text-sm font-semibold truncate`,children:e.model||d(`inventory.unknownModel`)}),(0,G.jsx)(`div`,{className:`text-[11px] text-bambu-gray`,children:e.printers.length===1?d(`inventory.onePrinter`):d(`inventory.nPrinters`,{n:e.printers.length})})]}),n>0?(0,G.jsx)(`span`,{className:`text-[10px] font-mono px-1.5 py-0.5 rounded-full bg-bambu-dark-tertiary text-bambu-gray shrink-0`,children:n}):(0,G.jsx)(fs,{className:`w-3.5 h-3.5 text-bambu-green shrink-0`})]},e.id)})}),(0,G.jsx)(`div`,{className:`flex-1 min-w-0`,children:p&&(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-3`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`h4`,{className:`text-base font-semibold text-white truncate`,children:p.model||d(`inventory.unknownModel`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:p.printers.map(e=>e.printer.name).join(`, `)})]}),e.slicer_filament&&(0,G.jsxs)(`button`,{type:`button`,onClick:C,title:d(`inventory.autoMatchPresetsHint`),className:`flex items-center gap-1.5 px-2 py-1 text-xs bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray hover:text-white hover:border-bambu-green transition-colors shrink-0`,children:[(0,G.jsx)(gu,{className:`w-3.5 h-3.5`}),d(`inventory.autoMatchPresets`)]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs font-semibold text-bambu-gray uppercase tracking-wide`,children:d(`inventory.filamentPreset`)}),p.model?(0,G.jsx)(`div`,{className:`space-y-2`,children:p.diameters.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsxs)(`span`,{className:`text-xs font-mono text-bambu-gray w-14 shrink-0`,children:[e,`mm`]}),(0,G.jsx)(`div`,{className:`flex-1 min-w-0`,children:w(p.model,e,d(`inventory.presetUseSpoolDefault`))})]},e))}):(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic`,children:d(`inventory.presetNeedsModel`)})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs font-semibold text-bambu-gray uppercase tracking-wide`,children:d(`inventory.kProfilesPerPrinter`)}),e.material?p.printers.map(e=>{let t=v(e);return(0,G.jsxs)(`div`,{className:`p-3 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1`,children:[(0,G.jsx)(Ll,{className:`w-3.5 h-3.5 text-bambu-gray shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm font-semibold text-white truncate`,children:e.printer.name}),(0,G.jsx)(`span`,{className:`text-[10px] font-semibold uppercase tracking-wide px-2 py-0.5 rounded-full shrink-0 ${e.printer.connected?`bg-green-500/20 text-green-500`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:e.printer.connected?d(`inventory.connected`):d(`inventory.offline`)})]}),e.printer.connected?t.length===0?(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic py-1`,children:d(`inventory.noKProfilesMatch`)}):(0,G.jsxs)(`div`,{className:`grid gap-x-3 gap-y-1.5 items-center`,style:{gridTemplateColumns:`3.5rem repeat(${_(e).length}, minmax(0, 1fr))`},children:[(0,G.jsx)(`span`,{}),_(e).map(e=>(0,G.jsx)(`span`,{className:`text-[11px] font-semibold uppercase tracking-wide text-bambu-gray`,children:e.label},e.extruder)),p.diameters.map(n=>(0,G.jsxs)(y.Fragment,{children:[(0,G.jsxs)(`span`,{className:`text-xs font-mono text-bambu-gray`,children:[n,`mm`]}),_(e).map(r=>{let i=t.filter(e=>(e.extruder_id??0)===r.extruder&&((e.nozzle_diameter??``).trim()||`0.4`)===n),o=rW(e.printer.id,r.extruder,n),s=a.get(o);if(i.length===0)return(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray/50 px-2 py-1.5`,title:d(`inventory.noKProfilesMatch`),children:`—`},o);let c=T1e(e,r.extruder),l=h9(s?.nozzle_id),u=!!(c&&l&&c!==l);return(0,G.jsxs)(`select`,{title:u?d(`inventory.kProfileFlowMismatch`,{profile:g9(l),fitted:g9(c)}):void 0,"aria-label":`${e.printer.name} ${r.label} ${n}mm`,value:s?String(s.cali_idx):``,onChange:t=>{let a=i.find(e=>String(e.cali_idx)===t.target.value)??null;S(e.printer.id,r.extruder,n,a)},className:`min-w-0 px-2 py-1.5 bg-bambu-dark-secondary border rounded-lg text-sm text-white focus:outline-none focus:border-bambu-green ${u?`border-amber-500/60`:`border-bambu-dark-tertiary`}`,children:[(0,G.jsx)(`option`,{value:``,children:d(`inventory.kProfileNotSet`)}),i.map(e=>{let t=g9(h9(e.nozzle_id));return(0,G.jsx)(`option`,{value:e.cali_idx,children:`${t?`[${t}] `:``}${e.name||e.filament_id}  K=${e.k_value.toFixed(3)}`},e.cali_idx)})]},o)})]},n))]}):(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic py-1`,children:d(`inventory.printerOffline`)})]},e.printer.id)}):(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic`,children:d(`inventory.selectMaterialFirst`)})]})]})})]})]})}function k1e(e){let t=ep(e);return t?t.toLocaleDateString(`en-GB`,{day:`2-digit`,month:`2-digit`,year:`2-digit`})+` `+t.toLocaleTimeString(`en-GB`,{hour:`2-digit`,minute:`2-digit`}):``}var A1e={completed:`text-bambu-green`,failed:`text-red-700 dark:text-red-400`,aborted:`text-yellow-700 dark:text-yellow-400`};function j1e({spoolId:e}){let{t}=U(),n=co(),{showToast:r}=Gd(),{data:i,isLoading:a}=K({queryKey:[`spool-usage`,e],queryFn:()=>Z.getSpoolUsageHistory(e)}),o=q({mutationFn:()=>Z.clearSpoolUsageHistory(e),onSuccess:()=>{n.invalidateQueries({queryKey:[`spool-usage`,e]}),r(t(`inventory.historyCleared`),`success`)}});return a?(0,G.jsx)(`div`,{className:`flex justify-center py-4`,children:(0,G.jsx)(Y,{className:`w-5 h-5 animate-spin text-bambu-green`})}):!i||i.length===0?(0,G.jsxs)(`div`,{className:`text-center py-4 text-bambu-gray text-sm`,children:[(0,G.jsx)(js,{className:`w-5 h-5 mx-auto mb-2 opacity-50`}),t(`inventory.noUsageHistory`)]}):(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`h4`,{className:`text-sm font-medium text-white`,children:t(`inventory.usageHistory`)}),(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:()=>o.mutate(),disabled:o.isPending,className:`text-xs text-bambu-gray hover:text-red-700 dark:hover:text-red-400`,children:[(0,G.jsx)(Nu,{className:`w-3 h-3 mr-1`}),t(`inventory.clearHistory`)]})]}),(0,G.jsx)(`div`,{className:`max-h-48 overflow-y-auto space-y-1`,children:i.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-2 rounded bg-bambu-dark/50 text-xs`,children:[(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:k1e(e.created_at)}),e.print_name&&(0,G.jsx)(`span`,{className:`text-white ml-2 truncate`,title:e.print_name,children:e.print_name})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-shrink-0 ml-2`,children:[(0,G.jsxs)(`span`,{className:`text-white font-medium`,children:[e.weight_used.toFixed(1),`g`]}),(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[`(`,e.percent_used,`%)`]}),(0,G.jsx)(`span`,{className:A1e[e.status]||`text-bambu-gray`,children:e.status})]})]},e.id))})]})}var M1e={tag_uid:null,tray_uuid:null,tag_type:null,data_origin:null};function N1e({isOpen:e,onClose:t,spool:n,mode:r,printersWithCalibrations:i=[],currencySymbol:a,onSpoolsCreated:o,spoolmanMode:s=!1,spoolsQueryKey:c=[`inventory-spools`]}){let{t:l}=U(),u=co(),{showToast:d}=Gd(),f=()=>D8(u,c),p=r===`edit`,m=r===`copy`,[h,g]=(0,y.useState)(f9),[_,v]=(0,y.useState)({}),[b,x]=(0,y.useState)(`filament`),[S,C]=(0,y.useState)(!1),[w,T]=(0,y.useState)(!1),[E,D]=(0,y.useState)(!1),[O,k]=(0,y.useState)(1),[A,j]=(0,y.useState)(!1),[M,N]=(0,y.useState)(!1),[P,F]=(0,y.useState)([]),[I,L]=(0,y.useState)(new Set),[R,z]=(0,y.useState)(``),[B,V]=(0,y.useState)([]),[ee,te]=(0,y.useState)([]),[ne,re]=(0,y.useState)([]),[ie,ae]=(0,y.useState)([]),[oe,se]=(0,y.useState)([]),[H,ce]=(0,y.useState)([]),[le,ue]=(0,y.useState)([]),[de,fe]=(0,y.useState)(!1),[pe,me]=(0,y.useState)(new Map),[he,ge]=(0,y.useState)(new Map),[_e,ve]=(0,y.useState)(``),ye=i.length>0?i:le,be=pe.size+he.size,{data:xe=[],isLoading:Se,error:Ce}=K({queryKey:[`spoolman-inventory-filaments`],queryFn:()=>Z.getSpoolmanInventoryFilaments(),enabled:s&&e,staleTime:6e4,retry:!1});(0,y.useEffect)(()=>{ce($U())},[]),(0,y.useEffect)(()=>{let t=!1;return e&&((async()=>{N(!0);try{let[e,n]=await Promise.allSettled([(async()=>(await Z.getCloudStatus()).is_authenticated?{connected:!0,presets:await Z.getFilamentPresets()}:{connected:!1,presets:[]})(),(async()=>(await Z.orcaCloudStatus()).connected?{connected:!0,presets:(await Z.orcaCloudListProfiles()).filament}:{connected:!1,presets:[]})()]);if(t)return;let r=e.status===`fulfilled`&&e.value.connected,i=n.status===`fulfilled`&&n.value.connected,a=e.status===`fulfilled`?e.value.presets:[],o=n.status===`fulfilled`?n.value.presets:[];j(r||i),F([...a,...o]),L(new Set(o.map(e=>e.setting_id)))}catch(e){if(t)return;console.error(`Failed to fetch cloud presets:`,e),j(!1)}finally{t||N(!1)}})(),s||Z.getSpoolCatalog().then(V).catch(console.error),Z.getColorCatalog().then(se).catch(console.error),Z.getLocalPresets().then(e=>re(e.filament)).catch(console.error),Z.getBuiltinFilaments().then(ae).catch(console.error),Z.getLocations().then(e=>te(e.map(e=>({id:e.id,name:e.name})))).catch(console.error),i.length===0&&(async()=>{fe(!0);try{let e=await Z.getPrinters(),n=await Promise.all(e.map(e=>Z.getPrinterStatus(e.id).catch(()=>null))),r=await Promise.all(e.map(async(e,t)=>{let r=n[t],i=r?.connected??!1,a=[];return i&&(a=await KU(e.id,r)),{printer:{...e,connected:i},calibrations:a,nozzles:r?.nozzles}}));t||ue(r)}catch(e){console.error(`Failed to fetch printer calibrations:`,e)}finally{t||fe(!1)}})()),()=>{t=!0}},[e,i.length]);let we=(0,y.useMemo)(()=>YU(P,new Set,ne,ie,I),[P,ne,ie,I]),Te=(0,y.useMemo)(()=>{let e=JU(P,ne),t=oe.map(e=>e.manufacturer?.trim()).filter(e=>!!e),n=new Set([...e,...t]);return Array.from(n).sort((e,t)=>e.localeCompare(t))},[P,ne,oe]),Ee=(0,y.useMemo)(()=>{let e=oe.map(e=>e.material?.trim()).filter(e=>!!e),t=new Set([...zU,...e]);return Array.from(t).sort((e,t)=>e.localeCompare(t))},[oe]),De=(0,y.useMemo)(()=>{let e=[];for(let t of oe){let n=t.manufacturer?.trim(),r=t.material?.trim();n&&r&&e.push({brand:n,material:r})}for(let t of P){let n=qU(t.name);n.brand&&n.material&&e.push({brand:n.brand,material:n.material})}for(let t of ne){let n=qU(t.name),r=t.filament_vendor?.trim()||n.brand,i=n.material;r&&i&&e.push({brand:r,material:i})}return e},[P,oe,ne]),Oe=(0,y.useMemo)(()=>{let e=new Map;for(let t of De){let n=t.brand.toLowerCase(),r=t.material.toLowerCase();e.has(n)||e.set(n,new Set),e.get(n).add(r)}return e},[De]),ke=(0,y.useMemo)(()=>{let e=new Map;for(let t of De){let n=t.brand.toLowerCase(),r=t.material.toLowerCase();e.has(r)||e.set(r,new Set),e.get(r).add(n)}return e},[De]),Ae=(0,y.useMemo)(()=>ZU(Te,h.brand),[Te,h.brand]),je=(0,y.useMemo)(()=>ZU(Ee,h.material),[Ee,h.material]),Me=(0,y.useMemo)(()=>QU(Ae,h.material,ke),[Ae,h.material,ke]),Ne=(0,y.useMemo)(()=>QU(je,h.brand,Oe),[je,h.brand,Oe]),Pe=(0,y.useMemo)(()=>XU(h.slicer_filament,we),[h.slicer_filament,we]);(0,y.useEffect)(()=>{if(e){if(n){let e=n.rgba&&/^[0-9A-Fa-f]{8}$/.test(n.rgba)?n.rgba:`808080FF`;if(g({material:n.material||``,subtype:n.subtype||``,brand:n.brand||``,color_name:n.color_name_is_synthesized?``:n.color_name||``,rgba:e,extra_colors:n.extra_colors||``,effect_type:n.effect_type||``,label_weight:n.label_weight||1e3,core_weight:n.core_weight||250,core_weight_catalog_id:n.core_weight_catalog_id??null,weight_used:m?0:n.weight_used||0,slicer_filament:n.slicer_filament||``,note:n.note||``,cost_per_kg:n.cost_per_kg??null,category:n.category||``,low_stock_threshold_pct:n.low_stock_threshold_pct??null,location_id:n.location_id??null,spoolman_filament_id:null}),z(n.slicer_filament_name||n.slicer_filament||``),n.k_profiles&&n.k_profiles.length>0){let e=new Map;for(let t of n.k_profiles){if(t.cali_idx===null||t.cali_idx===void 0)continue;let n=(t.nozzle_diameter||``).trim()||`0.4`,r=t.extruder??0;e.set(rW(t.printer_id,r,n),{cali_idx:t.cali_idx,filament_id:``,setting_id:t.setting_id||``,name:t.name||``,k_value:t.k_value,n_coef:0,extruder_id:r,nozzle_diameter:n,nozzle_id:t.nozzle_type||``})}me(e)}else me(new Map)}else g(f9),z(``),me(new Map);D(!1),k(1),v({}),x(`filament`),ve(``),ge(new Map),C(!1),T(!1)}},[e,n,r,m]),(0,y.useEffect)(()=>{if(!e||!n)return;let t=!1;return(s?Z.getSpoolmanFilamentPresets:Z.getSpoolFilamentPresets)(n.id).then(e=>{if(t)return;let n=new Map;for(let t of e)n.set(iW(t.printer_model,t.nozzle_diameter||``),{code:t.slicer_filament||``,name:t.slicer_filament_name||``});ge(n)}).catch(e=>{t||(console.error(`Failed to load filament preset overrides:`,e),d(l(`inventory.filamentPresetsLoadFailed`),`warning`))}),()=>{t=!0}},[e,n?.id,s]),(0,y.useEffect)(()=>{if(!e||!n||w||h.location_id!=null)return;let t=n.storage_location?.trim();if(!t||ee.length===0)return;let r=ee.find(e=>e.name.toLowerCase()===t.toLowerCase());r&&g(e=>e.location_id===r.id?e:{...e,location_id:r.id})},[e,n,ee,h.location_id,w]);let Fe=(e,t)=>{let n=m1e.has(e);s&&n&&h.spoolman_filament_id!==null&&d(l(`inventory.spoolmanFilamentUnlinked`),`info`),g(r=>({...r,[e]:t,...s&&n&&r.spoolman_filament_id!==null?{spoolman_filament_id:null}:{}})),e===`weight_used`&&C(!0),e===`location_id`&&T(!0),_[e]&&v(t=>({...t,[e]:void 0}))},Ie=e=>{let t=e.material||``,n=e.name||``,r=t&&n.startsWith(t)?n.slice(t.length).trim():n,i=(e.color_hex??``).replace(`#`,``).toUpperCase(),a=/^[0-9A-F]{6}(?:[0-9A-F]{2})?$/.test(i)?i:`808080`,o=a.length===8?a:`${a}FF`;g(n=>({...n,spoolman_filament_id:e.id,material:t,subtype:r,brand:e.vendor?.name||``,rgba:o,color_name:e.color_name||``,label_weight:e.weight??n.label_weight})),d(l(`inventory.spoolmanFilamentSelected`),`success`)},Le=e=>{ce(t=>eW(e,t))},Re=q({mutationFn:e=>s?Z.createSpoolmanInventorySpool(e):Z.createSpool(e),onSuccess:async e=>{e?.id&&!await Ze(e.id)||(await f(),o&&o([e]),d(l(`inventory.spoolCreated`),`success`),t())},onError:e=>{e instanceof od&&e.status===503?d(l(`inventory.spoolmanUnreachable`),`error`):d(l(`inventory.saveFailed`),`error`)}}),ze=q({mutationFn:({data:e,qty:t})=>s?Z.bulkCreateSpoolmanInventorySpools(e,t):Z.bulkCreateSpools(e,t),onSuccess:async e=>{let n=s&&`created`in e?e:null,r=n?n.created:e;if(pe.size>0||he.size>0)for(let e of r)await Ze(e.id);await f(),o&&o(r),n&&n.failed_count>0?d(l(`inventory.spoolsPartiallyCreated`,{created:r.length,total:n.requested_count}),`warning`):d(l(`inventory.spoolsCreated`,{count:r.length}),`success`),t()},onError:e=>{e instanceof od&&e.status===503?d(l(`inventory.spoolmanUnreachable`),`error`):d(l(`inventory.saveFailed`),`error`)}}),Be=q({mutationFn:e=>s?Z.updateSpoolmanInventorySpool(n.id,e):Z.updateSpool(n.id,e),onSuccess:async()=>{n?.id&&!await Ze(n.id)||(await f(),d(l(`inventory.spoolUpdated`),`success`),t())},onError:e=>{e instanceof od&&e.status===503?d(l(`inventory.spoolmanUnreachable`),`error`):d(l(`inventory.saveFailed`),`error`)}}),Ve=q({mutationFn:()=>s?Z.updateSpoolmanInventorySpool(n.id,M1e):Z.updateSpool(n.id,M1e),onSuccess:async()=>{await f(),d(l(`inventory.rfidCleared`,`RFID tag cleared`),`success`),t()},onError:e=>{e instanceof od&&e.status===503?d(l(`inventory.spoolmanUnreachable`),`error`):d(l(`inventory.tagClearFailed`),`error`)}}),{data:He}=K({queryKey:[`spool-assignments`],queryFn:()=>Z.getAssignments(),enabled:e&&p&&!s}),{data:Ue}=K({queryKey:[`spoolman-slot-assignments-all`],queryFn:()=>Z.getSpoolmanSlotAssignments(),enabled:e&&p&&s}),We=(()=>{if(n)return s?Ue?.find(e=>e.spoolman_spool_id===n.id):He?.find(e=>e.spool_id===n.id)})(),{data:Ge}=K({queryKey:[`inventory-spools`],queryFn:()=>Z.getSpools(!0),enabled:e}),{data:Ke}=K({queryKey:[`settings`],queryFn:Z.getSettings,enabled:e}),{data:qe}=K({queryKey:[`slicerPrinterModels`],queryFn:Z.getSlicerPrinterModels,enabled:e,staleTime:1/0}),Je=(()=>{let e=new Set;for(let t of Ge??[]){let n=t.category?.trim();n&&e.add(n)}return Array.from(e).sort((e,t)=>e.localeCompare(t))})(),Ye=Ke?.low_stock_threshold??20,Xe=q({mutationFn:async()=>{if(!We)throw Error(`No assignment`);if(s){if(!n)throw Error(`No spool`);await Z.unassignSpoolmanSlot(n.id);return}await Z.unassignSpool(We.printer_id,We.ams_id,We.tray_id)},onSuccess:async()=>{s?(await u.invalidateQueries({queryKey:[`spoolman-slot-assignments-all`]}),await u.invalidateQueries({queryKey:[`spoolman-slot-assignments`]})):await u.invalidateQueries({queryKey:[`spool-assignments`]}),d(l(`inventory.unassignSuccess`,`Spool unassigned`),`success`),t()},onError:e=>{d(e.message,`error`)}}),Ze=async e=>{let t=s?Z.saveSpoolmanKProfiles:Z.saveSpoolKProfiles,n=s?Z.saveSpoolmanFilamentPresets:Z.saveSpoolFilamentPresets,r=[];for(let[e,t]of pe){let[n,i,a]=e.split(`:`);r.push({printer_id:parseInt(n),extruder:parseInt(i),nozzle_diameter:a||`0.4`,nozzle_type:h9(t.nozzle_id),k_value:t.k_value,name:t.name||null,cali_idx:t.cali_idx,setting_id:t.setting_id||null})}let i=[];for(let[e,t]of he){let{model:n,diameter:r}=bOe(e);n&&i.push({printer_model:n,nozzle_diameter:r,slicer_filament:t.code||null,slicer_filament_name:t.name||null})}try{await t(e,r)}catch(e){return console.error(`Failed to save K-profiles:`,e),d(l(`inventory.kProfileSaveFailed`),`warning`),!1}try{await n(e,i)}catch(e){return console.error(`Failed to save filament preset overrides:`,e),d(l(`inventory.filamentPresetSaveFailed`),`warning`),!1}return!0};if((0,y.useEffect)(()=>{if(!e)return;let n=e=>{e.key===`Escape`&&t()};return document.addEventListener(`keydown`,n),()=>document.removeEventListener(`keydown`,n)},[e,t]),!e)return null;let Qe=()=>{let e=h1e(h,E,s,r);if(!e.isValid){v(e.errors),(e.errors.slicer_filament||e.errors.material||e.errors.brand||e.errors.subtype)&&x(`filament`);return}let t=Pe?.displayName||R||null,n={material:h.material||null,subtype:h.subtype||null,brand:h.brand||null,color_name:h.color_name||null,rgba:h.rgba||null,extra_colors:h.extra_colors||null,effect_type:h.effect_type||null,label_weight:h.label_weight,...s?{}:{core_weight:h.core_weight,core_weight_catalog_id:h.core_weight_catalog_id},slicer_filament:h.slicer_filament||null,slicer_filament_name:t,nozzle_temp_min:null,nozzle_temp_max:null,note:h.note||null,cost_per_kg:h.cost_per_kg,category:h.category.trim()||null,low_stock_threshold_pct:h.low_stock_threshold_pct,...s?{spoolman_filament_id:h.spoolman_filament_id}:{}};(!p||S)&&(n.weight_used=h.weight_used),(!p||w)&&(n.location_id=h.location_id),p?Be.mutate(n):O>1?ze.mutate({data:n,qty:O}):Re.mutate(n)},$e=Re.isPending||ze.isPending||Be.isPending||Ve.isPending||Xe.isPending;return(0,G.jsxs)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60 backdrop-blur-sm`,onClick:t}),(0,G.jsxs)(`div`,{className:`relative w-full max-w-5xl mx-4 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-2xl max-h-[90vh] flex flex-col`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary flex-shrink-0`,children:[(0,G.jsxs)(`h2`,{className:`text-lg font-semibold text-white flex items-baseline gap-2`,children:[l(p?`inventory.editSpool`:m?`inventory.copySpool`:`inventory.addSpool`),p&&n&&(0,G.jsxs)(`span`,{className:`text-sm font-mono text-bambu-gray`,children:[`#`,n.id]})]}),(0,G.jsx)(`button`,{onClick:t,className:`p-1 text-bambu-gray hover:text-white rounded transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),r===`create`&&(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-4 py-2 border-b border-bambu-dark-tertiary flex-shrink-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(rd,{className:`w-4 h-4 text-amber-600 dark:text-amber-400`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:l(`inventory.quickAdd`)})]}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>{D(!E),E||x(`filament`)},className:`relative inline-flex h-5 w-9 items-center rounded-full transition-colors ${E?`bg-bambu-green`:`bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(`span`,{className:`inline-block h-3.5 w-3.5 rounded-full bg-white transition-transform ${E?`translate-x-4`:`translate-x-0.5`}`})})]}),(0,G.jsxs)(`div`,{className:`flex border-b border-bambu-dark-tertiary flex-shrink-0`,children:[(0,G.jsxs)(`button`,{onClick:()=>x(`filament`),className:`flex-1 px-4 py-2.5 text-sm font-medium flex items-center justify-center gap-2 transition-colors ${b===`filament`?`text-bambu-green border-b-2 border-bambu-green`:`text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(Go,{className:`w-4 h-4`}),l(`inventory.filamentInfoTab`)]}),!E&&(0,G.jsxs)(`button`,{onClick:()=>x(`appearance`),className:`flex-1 px-4 py-2.5 text-sm font-medium flex items-center justify-center gap-2 transition-colors ${b===`appearance`?`text-bambu-green border-b-2 border-bambu-green`:`text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(Cl,{className:`w-4 h-4`}),l(`inventory.colorAndCostTab`)]}),!E&&(0,G.jsxs)(`button`,{onClick:()=>x(`printers`),className:`flex-1 px-4 py-2.5 text-sm font-medium flex items-center justify-center gap-2 transition-colors ${b===`printers`?`text-bambu-green border-b-2 border-bambu-green`:`text-bambu-gray hover:text-white`}`,children:[(0,G.jsx)(rd,{className:`w-4 h-4`}),l(`inventory.printersTab`),be>0&&(0,G.jsx)(`span`,{className:`text-xs px-1.5 py-0.5 rounded-full bg-bambu-green/20 text-bambu-green`,children:be})]})]}),(0,G.jsx)(`div`,{className:`p-4 overflow-y-auto flex-1`,style:{scrollbarGutter:`stable`},children:b===`filament`?(0,G.jsxs)(`div`,{className:`space-y-6`,children:[s&&!p&&(0,G.jsx)(`div`,{children:Ce?(0,G.jsx)(`p`,{className:`text-sm text-red-700 dark:text-red-400 px-1`,children:l(`inventory.spoolmanCatalogLoadFailed`)}):(0,G.jsx)(w1e,{filaments:xe,isLoading:Se,selectedId:h.spoolman_filament_id,onSelect:Ie})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-bambu-gray uppercase tracking-wide mb-3`,children:l(`inventory.filamentInfo`)}),(0,G.jsx)(y1e,{formData:h,updateField:Fe,cloudAuthenticated:A,loadingCloudPresets:M,presetInputValue:R,setPresetInputValue:z,selectedPresetOption:Pe,filamentOptions:we,availableBrands:Ae,availableMaterials:je,suggestedBrands:Me,suggestedMaterials:Ne,quickAdd:E,detailsRequired:!E&&!s&&r===`create`,quantity:O,onQuantityChange:k,errors:_})]})]}):b===`appearance`?(0,G.jsxs)(`div`,{className:`space-y-6`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-bambu-gray uppercase tracking-wide mb-3`,children:l(`inventory.color`)}),(0,G.jsx)(x1e,{formData:h,updateField:Fe,recentColors:H,onColorUsed:Le,catalogColors:oe})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-bambu-gray uppercase tracking-wide mb-3`,children:l(`inventory.additional`)}),(0,G.jsx)(C1e,{formData:h,updateField:Fe,spoolCatalog:B,currencySymbol:a,availableCategories:Je,availableLocations:ee,onCreateLocation:async e=>{try{let t=await Z.createLocation({name:e});return te(e=>[...e,{id:t.id,name:t.name}].sort((e,t)=>e.name.localeCompare(t.name))),await E8(u),{id:t.id,name:t.name}}catch(e){return console.error(e),d((e instanceof Error?e.message:l(`locations.saveFailed`))||l(`locations.saveFailed`),`error`),null}},globalLowStockThreshold:Ye,spoolmanMode:s})]}),p&&n&&!s&&(0,G.jsx)(`div`,{children:(0,G.jsx)(j1e,{spoolId:n.id})})]}):(0,G.jsx)(O1e,{formData:h,printersWithCalibrations:ye,filamentOptions:we,modelPresets:he,setModelPresets:ge,selectedProfiles:pe,setSelectedProfiles:me,selectedGroupId:_e,setSelectedGroupId:ve,printerModels:qe,isLoading:de})}),(0,G.jsxs)(`div`,{className:`flex gap-2 p-4 border-t border-bambu-dark-tertiary flex-shrink-0`,children:[p&&(0,G.jsxs)(`div`,{className:`flex gap-2 mr-auto`,children:[(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>Ve.mutate(),disabled:$e||!(n?.tag_uid||n?.tray_uuid),children:[(0,G.jsx)(Tu,{className:`w-4 h-4`}),l(`inventory.clearRfid`,`Clear RFID Tag`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>Xe.mutate(),disabled:$e||!We,children:[(0,G.jsx)(zu,{className:`w-4 h-4`}),l(`inventory.unassignSpool`,`Unassign`)]})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 ml-auto`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:t,children:l(`common.cancel`)}),(0,G.jsx)(Q,{onClick:Qe,disabled:$e,children:$e?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),l(`common.saving`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Kl,{className:`w-4 h-4`}),l(p?`common.save`:m?`inventory.copySpool`:`inventory.addSpool`)]})})]})]})]})]})}var P1e=[{value:`ams_holder_74x33`,i18nKey:`amsHolderSmall`,fallbackLabel:`AMS holder — small (74 × 33 mm)`,fallbackHint:`Single label per page; matches the printable label from MakerWorld model 752566 (AMS Filament Label Holder).`},{value:`ams_holder_75x55`,i18nKey:`amsHolderLarge`,fallbackLabel:`AMS holder — large (75 × 55 mm)`,fallbackHint:`Single label per page; fits the cardstock-insert variant of the AMS Filament Label Holder. Roomy enough for swatch, brand, material, ID, and QR code.`},{value:`box_40x30`,i18nKey:`box40x30`,fallbackLabel:`Box label (40 × 30 mm)`,fallbackHint:`Single label per page; common DK/Brother roll size, good for filament-bag and storage-bin labels.`},{value:`box_62x29`,i18nKey:`box`,fallbackLabel:`Box label (62 × 29 mm)`,fallbackHint:`Single label per page; sized for Brother PT/QL and Dymo small labels.`},{value:`avery_l7160`,i18nKey:`averyL7160`,fallbackLabel:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,fallbackHint:`EU sheet stock; 21 labels per A4 page.`},{value:`avery_5160`,i18nKey:`avery5160`,fallbackLabel:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,fallbackHint:`US sheet stock; 30 labels per Letter page.`}],_9={avery_l7160:21,avery_5160:30},v9=Math.max(...Object.values(_9));function F1e(e){let t=window.URL.createObjectURL(e);if(!window.open(t,`_blank`)){let e=document.createElement(`a`);e.href=t,e.download=`bambuddy-labels.pdf`,document.body.appendChild(e),e.click(),document.body.removeChild(e)}setTimeout(()=>window.URL.revokeObjectURL(t),6e4)}function I1e(e){return kf(e)}function L1e(e){return Ef(e.color_name,e.rgba,e.color_name_is_synthesized)}function R1e(e){return`${L1e(e)??`${e.material}${e.subtype?` ${e.subtype}`:``}`}${e.brand?` · ${e.brand}`:``}`}function z1e(e){return[L1e(e),e.color_name,e.material,e.subtype,e.brand,`#${e.id}`].filter(Boolean).join(` `).toLowerCase()}function B1e(e){if(!e)return[1,0];let t=e.replace(/^#/,``).slice(0,6);if(t.length!==6)return[1,0];let n=parseInt(t.slice(0,2),16),r=parseInt(t.slice(2,4),16),i=parseInt(t.slice(4,6),16);if([n,r,i].some(Number.isNaN))return[1,0];let a=n/255,o=r/255,s=i/255,c=Math.max(a,o,s),l=Math.min(a,o,s),u=(c+l)/2,d=c-l;if((d===0?0:d/(1-Math.abs(2*u-1)))<.1)return[1,u];let f=0;return f=c===a?(o-s)/d%6:c===o?(s-a)/d+2:(a-o)/d+4,f*=60,f<0&&(f+=360),[0,f]}function V1e({isOpen:e,onClose:t,availableSpools:n,initialSelectedIds:r,spoolmanMode:i}){let{t:a}=U(),o=Mf(),{showToast:s}=Gd(),[c,l]=(0,y.useState)(null),[u,d]=(0,y.useState)(new Set),[f,p]=(0,y.useState)(``),[m,h]=(0,y.useState)(``),[g,_]=(0,y.useState)(`id`),[v,b]=(0,y.useState)(!1),[x,S]=(0,y.useState)(`1`);(0,y.useEffect)(()=>{if(e){let e=new Set(n.map(e=>e.id));d(new Set(r.filter(t=>e.has(t)))),p(``),h(``),_(`id`),b(!1),S(`1`),l(null)}},[e]);let C=(0,y.useMemo)(()=>{let e=[...n];return g===`color`?(e.sort((e,t)=>{let n=B1e(e.rgba),r=B1e(t.rgba);return n[0]===r[0]?n[1]===r[1]?e.id-t.id:n[1]-r[1]:n[0]-r[0]}),e):(e.sort((e,t)=>e.id-t.id),e)},[n,g]),w=(0,y.useMemo)(()=>{let e=new Set;for(let t of C)t.material&&e.add(t.material.toUpperCase());return[...e].sort()},[C]),T=(0,y.useMemo)(()=>{let e=f.trim().toLowerCase();return C.filter(t=>!(m&&(t.material||``).toUpperCase()!==m||e&&!z1e(t).includes(e)))},[C,f,m,o]),E=T.length>0&&T.every(e=>u.has(e.id));if(!e)return null;let D=u.size,O=D===0,k=Number(x),A=Number.isInteger(k)&&k>=1&&k<=v9;function j(e){d(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})}function M(){d(e=>{let t=new Set(e);for(let e of T)t.add(e.id);return t})}function N(){d(e=>{let t=new Set(e);for(let e of T)t.delete(e.id);return t})}function P(){d(new Set)}async function F(e){if(O||c)return;let n=_9[e];if(n!==void 0&&(!A||k>n)){s(a(`inventory.labels.startingPositionRangeError`,`Starting position must be between 1 and {{capacity}} for this sheet.`,{capacity:n}),`error`);return}let r=C.filter(e=>u.has(e.id)).map(e=>e.id);l(e);try{F1e(i?await Z.printSpoolmanSpoolLabels({spool_ids:r,template:e,monochrome:v,starting_position:n===void 0?1:k}):await Z.printSpoolLabels({spool_ids:r,template:e,monochrome:v,starting_position:n===void 0?1:k})),t()}catch(e){s(a(`inventory.labels.error`,`Could not generate labels: {{msg}}`,{msg:e instanceof Error?e.message:String(e)}),`error`)}finally{l(null)}}return(0,G.jsxs)(`div`,{className:`fixed inset-0 z-50 flex items-start sm:items-center justify-center p-4 overflow-y-auto`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60 backdrop-blur-sm`,onClick:t}),(0,G.jsxs)(`div`,{"data-testid":`label-template-picker-panel`,className:`relative w-full max-w-3xl bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-2xl max-h-[90vh] overflow-clip flex flex-col my-auto`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Ll,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:a(`inventory.labels.title`,`Print spool labels`)}),D>0&&(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[`(`,a(`inventory.labels.selectedCount`,`{{count}} selected`,{count:D}),`)`]})]}),(0,G.jsx)(`button`,{onClick:t,className:`p-1 text-bambu-gray hover:text-white rounded transition-colors`,"aria-label":a(`common.close`,`Close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-2 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none`}),(0,G.jsx)(`input`,{type:`search`,value:f,onChange:e=>p(e.target.value),placeholder:a(`inventory.labels.searchPlaceholder`,`Search name, brand, or #ID`),className:`w-full pl-9 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray focus:outline-none focus:border-bambu-green`})]}),w.length>1&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-1.5`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray mr-1`,children:a(`inventory.labels.filterByMaterial`,`Material:`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>h(``),className:`px-2 py-0.5 text-xs rounded-full border transition ${m===``?`bg-bambu-green text-bambu-dark border-bambu-green`:`bg-bambu-dark text-bambu-gray border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:a(`inventory.labels.allMaterials`,`All`)}),w.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>h(e),className:`px-2 py-0.5 text-xs rounded-full border transition ${m===e?`bg-bambu-green text-bambu-dark border-bambu-green`:`bg-bambu-dark text-bambu-gray border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:e},e))]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-1.5`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray mr-1`,children:a(`inventory.labels.sortBy.label`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>_(`id`),className:`px-2 py-0.5 text-xs rounded-full border transition ${g===`id`?`bg-bambu-green text-bambu-dark border-bambu-green`:`bg-bambu-dark text-bambu-gray border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:a(`inventory.labels.sortBy.id`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>_(`color`),className:`px-2 py-0.5 text-xs rounded-full border transition ${g===`color`?`bg-bambu-green text-bambu-dark border-bambu-green`:`bg-bambu-dark text-bambu-gray border-bambu-dark-tertiary hover:border-bambu-gray`}`,children:a(`inventory.labels.sortBy.color`)})]})]}),(0,G.jsxs)(`div`,{className:`px-4 pt-3 pb-2 flex items-center justify-between gap-3 flex-wrap`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:a(`inventory.labels.pickSpools`,`Pick which spools to print labels for:`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3 text-xs`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:E?N:M,disabled:T.length===0,className:`text-bambu-green hover:underline disabled:opacity-50 disabled:no-underline disabled:cursor-not-allowed`,children:E?a(`inventory.labels.deselectVisible`,`Deselect visible`):a(`inventory.labels.selectVisible`,`Select all visible ({{count}})`,{count:T.length})}),(0,G.jsx)(`button`,{type:`button`,onClick:P,disabled:D===0,className:`text-bambu-gray hover:text-white hover:underline disabled:opacity-50 disabled:no-underline disabled:cursor-not-allowed`,children:a(`inventory.labels.clearAll`,`Clear all`)})]})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto px-2 pb-2 min-h-0`,children:T.length===0?(0,G.jsx)(`div`,{className:`text-center text-sm text-bambu-gray py-6`,children:C.length===0?a(`inventory.labels.noSpoolsToShow`,`No spools to show. Adjust your filter and try again.`):a(`inventory.labels.noMatches`,`No spools match the current search or filter.`)}):(0,G.jsx)(`ul`,{className:`space-y-0.5`,children:T.map(e=>{let t=u.has(e.id);return(0,G.jsx)(`li`,{children:(0,G.jsxs)(`label`,{className:`flex items-center gap-3 px-2 py-1.5 rounded hover:bg-bambu-dark-tertiary/50 cursor-pointer`,children:[t?(0,G.jsx)(_u,{className:`w-4 h-4 text-bambu-green shrink-0`}):(0,G.jsx)(yu,{className:`w-4 h-4 text-bambu-gray shrink-0`}),(0,G.jsx)(`input`,{type:`checkbox`,checked:t,onChange:()=>j(e.id),className:`sr-only`}),(0,G.jsx)(`span`,{className:`w-4 h-4 rounded border border-black/20 shrink-0`,style:I1e(e.rgba)}),(0,G.jsx)(`span`,{className:`flex-1 min-w-0 truncate text-sm text-white`,children:R1e(e)}),(0,G.jsxs)(`span`,{className:`text-xs font-mono text-bambu-gray shrink-0`,children:[`#`,e.id]})]})},e.id)})})}),(0,G.jsxs)(`div`,{className:`px-4 pt-2 pb-1 border-t border-bambu-dark-tertiary space-y-2`,children:[(0,G.jsxs)(`label`,{className:`inline-flex items-center gap-2 cursor-pointer select-none`,children:[v?(0,G.jsx)(_u,{className:`w-4 h-4 text-bambu-green shrink-0`}):(0,G.jsx)(yu,{className:`w-4 h-4 text-bambu-gray shrink-0`}),(0,G.jsx)(`input`,{type:`checkbox`,checked:v,onChange:e=>b(e.target.checked),className:`sr-only`}),(0,G.jsx)(`span`,{className:`text-sm text-white`,children:a(`inventory.labels.monochrome`,`Monochrome (black & white printer)`)}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:a(`inventory.labels.monochromeHint`,`Drops the colour swatch and widens the text`)})]}),(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(`label`,{htmlFor:`label-starting-position`,className:`text-sm text-white whitespace-nowrap pt-1.5`,children:a(`inventory.labels.startingPosition`,`Starting label position`)}),(0,G.jsx)(`input`,{id:`label-starting-position`,"data-testid":`label-starting-position`,type:`number`,min:1,max:v9,step:1,value:x,onChange:e=>S(e.target.value),"aria-describedby":`label-starting-position-help`,className:`w-20 px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm focus:outline-none focus:border-bambu-green`}),(0,G.jsxs)(`div`,{id:`label-starting-position-help`,className:`text-xs text-bambu-gray pt-1.5`,children:[(0,G.jsx)(`div`,{children:a(`inventory.labels.startingPositionRange`,`Sheet templates only: L7160 supports 1–21; 5160 supports 1–30.`)}),(0,G.jsx)(`div`,{"data-testid":`label-starting-position-status`,className:A?``:`text-red-400`,children:A?k===1?a(`inventory.labels.startingPositionFirst`,`Printing starts at position 1.`):a(`inventory.labels.startingPositionSkipped`,`Positions 1 through {{lastPosition}} will be left blank on the first sheet.`,{lastPosition:k-1}):a(`inventory.labels.startingPositionInvalid`,`Enter a whole number from 1 to {{capacity}}.`,{capacity:v9})})]})]})]}),(0,G.jsx)(`div`,{className:`px-3 pt-1 pb-2 grid grid-cols-1 sm:grid-cols-2 gap-2`,children:P1e.map(e=>{let t=c===e.value,n=_9[e.value],r=n!==void 0&&(!A||k>n),i=a(`inventory.labels.templates.${e.i18nKey}.label`,e.fallbackLabel),o=r?a(`inventory.labels.startingPositionRangeError`,`Starting position must be between 1 and {{capacity}} for this sheet.`,{capacity:n}):a(`inventory.labels.templates.${e.i18nKey}.hint`,e.fallbackHint);return(0,G.jsxs)(`button`,{"data-testid":`print-labels-${e.value}`,disabled:O||c!==null||r,onClick:()=>F(e.value),title:`${i} — ${o}`,className:`w-full text-left p-2.5 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark hover:border-bambu-green hover:bg-bambu-green/10 disabled:opacity-50 disabled:cursor-not-allowed disabled:hover:border-bambu-dark-tertiary disabled:hover:bg-bambu-dark transition flex items-center gap-3`,children:[(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`div`,{className:`font-medium text-white text-sm truncate`,children:i}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mt-0.5 truncate`,children:o})]}),t&&(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin text-bambu-green shrink-0`})]},e.value)})}),(0,G.jsx)(`div`,{className:`flex justify-end gap-2 px-5 py-2 border-t border-bambu-dark-tertiary`,children:(0,G.jsx)(Q,{variant:`secondary`,onClick:t,disabled:c!==null,children:a(`common.cancel`,`Cancel`)})})]})]})}function H1e({onClose:e,onImported:t}){let{t:n}=U(),[r,i]=(0,y.useState)(null),[a,o]=(0,y.useState)(!1),[s,c]=(0,y.useState)(null),[l,u]=(0,y.useState)(!1),[d,f]=(0,y.useState)(!1),[p,m]=(0,y.useState)(null),h=(0,y.useRef)(null),g=async e=>{i(e),c(null),m(null),u(!0);try{c(await Z.importSpoolsCsvPreview(e))}catch(e){m(e instanceof Error?e.message:n(`inventory.csv.previewError`,`Could not read the CSV file`))}finally{u(!1)}},_=e=>{let t=e.target.files?.[0];t&&g(t)},v=e=>{e.preventDefault(),o(!1);let t=e.dataTransfer.files?.[0];t&&g(t)},b=async()=>{if(r){f(!0),m(null);try{t((await Z.importSpoolsCsv(r)).created)}catch(e){m(e instanceof Error?e.message:n(`inventory.csv.importError`,`Import failed`)),f(!1)}}},x=e=>e===`valid`?(0,G.jsx)(xs,{className:`w-4 h-4 text-green-500 flex-shrink-0`}):e===`error`?(0,G.jsx)(Ds,{className:`w-4 h-4 text-red-500 flex-shrink-0`}):(0,G.jsx)(ws,{className:`w-4 h-4 text-bambu-gray flex-shrink-0`}),S=s?.valid_count??0;return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,children:(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg w-full max-w-3xl border border-bambu-dark-tertiary flex flex-col max-h-[90vh]`,children:[(0,G.jsxs)(`div`,{className:`p-4 border-b border-bambu-dark-tertiary flex items-center justify-between`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:n(`inventory.csv.modalTitle`,`Import spools from CSV`)}),(0,G.jsx)(`button`,{onClick:e,className:`p-1 hover:bg-bambu-dark rounded`,children:(0,G.jsx)(td,{className:`w-5 h-5 text-bambu-gray`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-4 overflow-y-auto flex-1`,children:[(0,G.jsxs)(`div`,{onDragOver:e=>{e.preventDefault(),o(!0)},onDragLeave:e=>{e.preventDefault(),o(!1)},onDrop:v,onClick:()=>h.current?.click(),className:`border-2 border-dashed rounded-lg p-6 text-center cursor-pointer transition-colors ${a?`border-bambu-green bg-bambu-green/10`:`border-bambu-dark-tertiary hover:border-bambu-green/50`}`,children:[(0,G.jsx)(Bu,{className:`w-9 h-9 mx-auto mb-2 ${a?`text-bambu-green`:`text-bambu-gray`}`}),r?(0,G.jsxs)(`p`,{className:`text-white font-medium flex items-center justify-center gap-2`,children:[(0,G.jsx)(dc,{className:`w-4 h-4`}),` `,r.name]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:n(`inventory.csv.selectFile`,`Choose a CSV file or drag it here`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/70 mt-1`,children:n(`inventory.csv.dragHint`,`Header: material (required), brand, subtype, color_name, rgba, …`)})]})]}),(0,G.jsx)(`input`,{ref:h,type:`file`,accept:`.csv,text/csv`,className:`hidden`,onChange:_}),l&&(0,G.jsxs)(`div`,{className:`flex items-center justify-center gap-2 text-bambu-gray py-4`,children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),n(`inventory.csv.parsing`,`Reading file…`)]}),p&&(0,G.jsxs)(`div`,{className:`p-3 bg-red-50 dark:bg-red-500/10 border border-red-300 dark:border-red-500/30 rounded-lg flex items-start gap-3`,children:[(0,G.jsx)(Ds,{className:`w-5 h-5 text-red-600 dark:text-red-400 mt-0.5 flex-shrink-0`}),(0,G.jsx)(`p`,{className:`text-sm text-red-700 dark:text-red-300 break-words`,children:p})]}),s&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-3 text-sm`,children:[(0,G.jsx)(`span`,{className:`px-2 py-1 rounded bg-green-50 dark:bg-green-500/10 text-green-700 dark:text-green-400`,children:n(`inventory.csv.validCount`,`{{count}} valid`,{count:s.valid_count})}),(0,G.jsx)(`span`,{className:`px-2 py-1 rounded bg-red-50 dark:bg-red-500/10 text-red-700 dark:text-red-400`,children:n(`inventory.csv.errorCount`,`{{count}} error`,{count:s.error_count})}),(0,G.jsx)(`span`,{className:`px-2 py-1 rounded bg-bambu-dark text-bambu-gray`,children:n(`inventory.csv.skippedCount`,`{{count}} skipped`,{count:s.skipped_count})})]}),s.warnings.length>0&&(0,G.jsx)(`div`,{className:`p-3 bg-yellow-50 dark:bg-yellow-500/10 border border-yellow-300 dark:border-yellow-500/30 rounded-lg space-y-1`,children:s.warnings.map((e,t)=>(0,G.jsx)(`p`,{className:`text-xs text-yellow-700 dark:text-yellow-300`,children:e},t))}),s.rows.length>0&&(0,G.jsx)(`div`,{className:`border border-bambu-dark-tertiary rounded-lg overflow-hidden`,children:(0,G.jsx)(`div`,{className:`max-h-72 overflow-y-auto`,children:(0,G.jsxs)(`table`,{className:`w-full text-sm`,children:[(0,G.jsx)(`thead`,{className:`bg-bambu-dark sticky top-0`,children:(0,G.jsxs)(`tr`,{className:`text-left text-bambu-gray`,children:[(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium`,children:n(`inventory.csv.colRow`,`Row`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium`,children:n(`inventory.csv.colStatus`,`Status`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium`,children:n(`inventory.material`,`Material`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium`,children:n(`inventory.brand`,`Brand`)}),(0,G.jsx)(`th`,{className:`px-3 py-2 font-medium`,children:n(`inventory.csv.colColor`,`Color`)})]})}),(0,G.jsx)(`tbody`,{children:s.rows.map(e=>(0,G.jsxs)(`tr`,{className:`border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(`td`,{className:`px-3 py-2 text-bambu-gray`,children:e.row_number}),(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[x(e.status),e.status===`error`&&e.reason&&(0,G.jsx)(`span`,{className:`text-xs text-red-700 dark:text-red-400 break-words`,children:e.reason})]})}),(0,G.jsx)(`td`,{className:`px-3 py-2 text-white`,children:e.material||`—`}),(0,G.jsx)(`td`,{className:`px-3 py-2 text-white`,children:e.brand||`—`}),(0,G.jsx)(`td`,{className:`px-3 py-2`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[e.rgba&&(0,G.jsx)(`span`,{className:`inline-block w-4 h-4 rounded-full border border-bambu-dark-tertiary flex-shrink-0`,style:kf(e.rgba)}),(0,G.jsx)(`span`,{className:`text-white`,children:e.color_name||`—`}),e.resolved_color&&!e.cross_material_color&&(0,G.jsx)(`span`,{title:n(`inventory.csv.colorResolved`,`Color filled from catalog`),children:(0,G.jsx)(Ju,{className:`w-3.5 h-3.5 text-bambu-green flex-shrink-0`})}),e.cross_material_color&&(0,G.jsx)(`span`,{title:n(`inventory.csv.colorCrossMaterial`,`Color taken from a different material — no exact match in catalog`),children:(0,G.jsx)(Iu,{className:`w-3.5 h-3.5 text-yellow-500 flex-shrink-0`})}),e.duplicate_of_existing&&(0,G.jsx)(`span`,{title:n(`inventory.csv.duplicateExisting`,`A spool with this material, brand and color already exists — it will still be imported as a new spool`),children:(0,G.jsx)(Vs,{className:`w-3.5 h-3.5 text-amber-600 dark:text-amber-400 flex-shrink-0`})})]})})]},e.row_number))})]})})})]})]}),(0,G.jsxs)(`div`,{className:`p-4 border-t border-bambu-dark-tertiary flex justify-end gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:e,disabled:d,children:n(`common.cancel`)}),(0,G.jsx)(Q,{onClick:b,disabled:!s||S===0||d,children:d?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 mr-2 animate-spin`}),n(`inventory.csv.importing`,`Importing…`)]}):S>0?n(`inventory.csv.importValidRows`,`Import {{count}} valid rows`,{count:S}):n(`inventory.csv.noValidRows`,`No valid rows`)})]})]})})}var y9=[{id:`material`,type:`searchable`,labelKey:`inventory.material`},{id:`subtype`,type:`searchable`,labelKey:`inventory.subtype`},{id:`brand`,type:`searchable`,labelKey:`inventory.brand`},{id:`color_name`,type:`text`,labelKey:`inventory.colorName`},{id:`rgba`,type:`color`,labelKey:`inventory.color`,pattern:`^[0-9A-Fa-f]{6}([0-9A-Fa-f]{2})?$`},{id:`location_id`,type:`searchableClosed`,labelKey:`inventory.storageLocation`},{id:`slicer_filament_name`,type:`searchable`,labelKey:`inventory.slicerFilamentName`},{id:`slicer_filament`,type:`searchable`,labelKey:`inventory.slicerFilament`},{id:`cost_per_kg`,type:`number`,labelKey:`inventory.costPerKg`,min:0,step:.01},{id:`note`,type:`textarea`,labelKey:`inventory.note`},{id:`label_weight`,type:`number`,labelKey:`inventory.labelWeight`,min:1,step:1},{id:`core_weight`,type:`number`,labelKey:`inventory.coreWeight`,min:0,step:1},{id:`category`,type:`searchable`,labelKey:`inventory.category`},{id:`low_stock_threshold_pct`,type:`number`,labelKey:`inventory.lowStockThresholdOverride`,min:1,max:99,step:1}];function U1e({value:e,onChange:t,options:n,allowCustom:r,placeholderKey:i,disabled:a}){let{t:o}=U(),s=(0,y.useRef)(null),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(``);(0,y.useEffect)(()=>{if(!c)return;let e=e=>{s.current&&!s.current.contains(e.target)&&(l(!1),d(``))},t=e=>{e.key===`Escape`&&(l(!1),d(``))};return document.addEventListener(`mousedown`,e),document.addEventListener(`keydown`,t),()=>{document.removeEventListener(`mousedown`,e),document.removeEventListener(`keydown`,t)}},[c]);let f=c?u:n.find(t=>t.value===e)?.label??e,p=(0,y.useMemo)(()=>{if(!c)return n;let e=u.trim().toLowerCase();return e?n.filter(t=>t.label.toLowerCase().includes(e)||t.value.toLowerCase().includes(e)):n},[c,u,n]),m=c&&u.trim()&&!n.some(e=>e.value.toLowerCase()===u.trim().toLowerCase());return(0,G.jsxs)(`div`,{className:`relative`,ref:s,children:[(0,G.jsx)(`input`,{type:`text`,disabled:a,value:f,onChange:e=>{d(e.target.value),l(!0),r&&t(e.target.value)},onFocus:()=>{l(!0),d(``)},placeholder:i?o(i):void 0,className:`w-full px-3 py-2 pr-9 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray/50 focus:border-bambu-green focus:outline-none`}),(0,G.jsx)(ps,{className:`absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray/50 pointer-events-none`}),c&&(0,G.jsxs)(`div`,{className:`absolute z-50 left-0 right-0 mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg max-h-64 overflow-y-auto`,children:[p.length===0&&!r&&(0,G.jsx)(`div`,{className:`px-3 py-2 text-sm text-bambu-gray`,children:o(`inventory.noResults`)}),p.map(n=>(0,G.jsx)(`button`,{type:`button`,className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary ${e===n.value?`bg-bambu-green/10 text-bambu-green`:`text-white`}`,onClick:()=>{t(n.value),l(!1),d(``)},children:n.label},n.value)),r&&m&&(0,G.jsx)(`button`,{type:`button`,className:`w-full px-3 py-2 text-left text-sm hover:bg-bambu-dark-tertiary text-bambu-green border-t border-bambu-dark-tertiary`,onClick:()=>{t(u.trim()),l(!1),d(``)},children:o(`inventory.bulk.useCustom`,{value:u.trim()})})]})]})}function b9(...e){let t=new Set;for(let n of e)for(let e of n){let n=e?.trim();n&&t.add(n)}return Array.from(t).sort((e,t)=>e.localeCompare(t))}function W1e({isOpen:e,selectedCount:t,isPending:n,availableLocations:r,availableMaterials:i,availableSubtypes:a,availableBrands:o,availableCategories:s,availableSlicerFilaments:c,availableSlicerFilamentNames:l,onClose:u,onApply:d}){let{t:f}=U(),{data:p=[]}=K({queryKey:[`bulk-edit-cloud-presets`],enabled:e,staleTime:300*1e3,queryFn:async()=>{let e=[];try{if((await Z.getCloudStatus()).is_authenticated){let t=await Z.getFilamentPresets();e.push(...t)}}catch{}try{if((await Z.orcaCloudStatus()).connected){let t=await Z.orcaCloudListProfiles();e.push(...t.filament)}}catch{}return e}}),{data:m}=K({queryKey:[`bulk-edit-local-presets`],enabled:e,staleTime:300*1e3,queryFn:Z.getLocalPresets}),{data:h=[]}=K({queryKey:[`builtin-filaments`],enabled:e,staleTime:300*1e3,queryFn:Z.getBuiltinFilaments}),g=(0,y.useMemo)(()=>YU(p,new Set,m?.filament??[],h),[p,m,h]),[_,v]=(0,y.useState)({}),b=(0,y.useMemo)(()=>b9(zU,i).map(e=>({value:e,label:e})),[i]),x=(0,y.useMemo)(()=>b9(VU,a).map(e=>({value:e,label:e})),[a]),S=(0,y.useMemo)(()=>b9(BU,o).map(e=>({value:e,label:e})),[o]),C=(0,y.useMemo)(()=>b9(s).map(e=>({value:e,label:e})),[s]),w=(0,y.useMemo)(()=>{let e=g.map(e=>({value:e.code,label:e.displayName})),t=c.filter(t=>!e.some(e=>e.value===t)).map(e=>({value:e,label:e}));return[...e,...t].sort((e,t)=>e.label.localeCompare(t.label))},[g,c]),T=(0,y.useMemo)(()=>{let e=g.map(e=>({value:e.displayName,label:e.displayName})),t=l.filter(t=>!e.some(e=>e.value===t)).map(e=>({value:e,label:e}));return[...e,...t].sort((e,t)=>e.label.localeCompare(t.label))},[g,l]),E=(0,y.useMemo)(()=>r.map(e=>({value:String(e.id),label:e.name})),[r]);if(!e)return null;let D=(e,t)=>{v(n=>({...n,[e]:t}))},O=e=>{v(t=>{let n={...t};return delete n[e],n})},k=(()=>{let e={};for(let t of y9){let n=_[t.id];if(n===void 0)continue;let r=typeof n==`string`?n.trim():n;if(!(r===``||r===null))if(t.type===`number`){let n=Number(r);Number.isFinite(n)&&(e[t.id]=n)}else if(t.id===`location_id`){let n=Number(r);Number.isFinite(n)&&n>0&&(e[t.id]=n)}else if(t.id===`rgba`){let n=String(r).replace(/^#/,``),i=n.length===6?`${n}FF`:n;/^[0-9A-Fa-f]{8}$/.test(i)&&(e[t.id]=i.toUpperCase())}else e[t.id]=String(r)}return e})(),A=Object.keys(k).length>0,j=y9.some(e=>{let t=_[e.id];return t===void 0||t.trim()===``?!1:k[e.id]===void 0}),M=e=>e===`material`?b:e===`subtype`?x:e===`brand`?S:e===`category`?C:e===`slicer_filament`?w:e===`slicer_filament_name`?T:e===`location_id`?E:[],N=e=>{let t=_[e.id]??``;if(e.type===`searchable`||e.type===`searchableClosed`)return(0,G.jsx)(U1e,{value:t,onChange:t=>{t===``?O(e.id):D(e.id,t)},options:M(e.id),allowCustom:e.type===`searchable`,disabled:n});if(e.type===`textarea`)return(0,G.jsx)(`textarea`,{disabled:n,value:t,onChange:t=>D(e.id,t.target.value),className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray/50 focus:border-bambu-green focus:outline-none resize-none min-h-[60px]`});if(e.type===`color`){let r=t.trim().replace(/^#/,``),i=r.length===6?`${r}FF`:r,a=t.trim()!==``&&!/^[0-9A-Fa-f]{8}$/.test(i);return(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{type:`color`,disabled:n,value:`#${(t||`808080`).replace(/^#/,``).slice(0,6)}`,onChange:t=>D(e.id,t.target.value.replace(/^#/,``).toUpperCase()),className:`h-9 w-12 rounded cursor-pointer`}),(0,G.jsx)(`input`,{type:`text`,disabled:n,value:t,onChange:t=>D(e.id,t.target.value.replace(/^#/,``).toUpperCase()),placeholder:`RRGGBB or RRGGBBAA`,className:`flex-1 px-3 py-2 bg-bambu-dark border rounded-lg text-white placeholder-bambu-gray/50 focus:outline-none ${a?`border-red-500 focus:border-red-500`:`border-bambu-dark-tertiary focus:border-bambu-green`}`,pattern:e.pattern})]}),a&&(0,G.jsx)(`p`,{className:`mt-1 text-xs text-red-600 dark:text-red-400`,children:f(`inventory.bulk.invalidHex`)})]})}return(0,G.jsx)(`input`,{type:e.type===`number`?`number`:`text`,disabled:n,value:t,onChange:t=>D(e.id,t.target.value),min:e.min,max:e.max,step:e.step,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray/50 focus:border-bambu-green focus:outline-none`})};return(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/50 flex items-center justify-center p-4 z-50`,onClick:n?void 0:u,children:(0,G.jsxs)(`div`,{className:`w-full max-w-3xl bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg max-h-[90vh] flex flex-col`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-5 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:f(`inventory.bulk.editTitle`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-0.5`,children:f(`inventory.bulk.editSubtitle`,{count:t})})]}),(0,G.jsx)(`button`,{onClick:u,disabled:n,className:`p-1 text-bambu-gray hover:text-white transition-colors`,"aria-label":f(`common.close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsx)(`p`,{className:`px-5 pt-4 text-xs text-bambu-gray`,children:f(`inventory.bulk.editHint`)}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto p-5 space-y-3`,children:y9.map(e=>{let t=_[e.id]!==void 0;return(0,G.jsxs)(`div`,{className:`flex items-start gap-3 rounded-md p-2 transition-colors ${t?`bg-bambu-green/5 border border-bambu-green/30`:`border border-transparent`}`,children:[(0,G.jsx)(`div`,{className:`pt-2`,children:(0,G.jsx)(`input`,{type:`checkbox`,className:`h-4 w-4 cursor-pointer`,checked:t,onChange:t=>{t.target.checked?D(e.id,``):O(e.id)},"aria-label":f(`inventory.bulk.toggleField`)})}),(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`label`,{className:`block text-sm text-bambu-gray mb-1`,children:f(e.labelKey)}),N(e)]})]},e.id)})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3 p-5 border-t border-bambu-dark-tertiary`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:f(`inventory.bulk.changeCount`,{count:Object.keys(k).length})}),(0,G.jsxs)(`div`,{className:`ml-auto flex gap-2`,children:[(0,G.jsx)(Q,{variant:`secondary`,onClick:u,disabled:n,children:f(`common.cancel`)}),(0,G.jsx)(Q,{onClick:()=>d(k),disabled:!A||n||j,children:n?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 mr-2 animate-spin`}),f(`inventory.bulk.applyPending`)]}):f(`inventory.bulk.applyButton`,{count:t})})]})]})]})})}function G1e(e){let t=e[0],n=0,r=0,i=0;for(let t of e)n+=t.label_weight,r+=t.weight_used,i+=t.core_weight;return{...t,label_weight:n,weight_used:r,core_weight:i}}function x9(e){let t=new Set;for(let n of e)if(typeof n==`string`){let e=n.trim();e&&t.add(e)}return Array.from(t).sort((e,t)=>e.localeCompare(t))}function K1e(e){return`${e.material}|${e.subtype||``}|${e.brand||``}|${e.color_name||``}|${e.rgba||``}|${e.extra_colors||``}|${e.effect_type||``}|${e.label_weight}`}var q1e=`bambuddy-inventory-columns`,S9=[{id:`id`,label:`#`,visible:!0},{id:`added_time`,label:`Added`,visible:!0},{id:`encode_time`,label:`Encoded`,visible:!1},{id:`last_used_time`,label:`Last Used`,visible:!1},{id:`rgba`,label:`Color`,visible:!0},{id:`material`,label:`Material`,visible:!0},{id:`subtype`,label:`Subtype`,visible:!0},{id:`color_name`,label:`Color Name`,visible:!1},{id:`brand`,label:`Brand`,visible:!0},{id:`slicer_filament`,label:`Slicer Filament`,visible:!1},{id:`location`,label:`Location`,visible:!0},{id:`storage_location`,label:`Storage Location`,visible:!1},{id:`temperature`,label:`Temperature`,visible:!1},{id:`humidity`,label:`Humidity`,visible:!1},{id:`battery`,label:`Battery`,visible:!1},{id:`label_weight`,label:`Label`,visible:!0},{id:`net`,label:`Net`,visible:!0},{id:`gross`,label:`Gross`,visible:!1},{id:`added_full`,label:`Full`,visible:!1},{id:`used`,label:`Used`,visible:!1},{id:`printed_total`,label:`Printed Total`,visible:!1},{id:`printed_since_weight`,label:`Printed Since Weight`,visible:!1},{id:`note`,label:`Note`,visible:!1},{id:`pa_k`,label:`PA(K)`,visible:!0},{id:`tag_id`,label:`Tag ID`,visible:!1},{id:`data_origin`,label:`Data Origin`,visible:!1},{id:`tag_type`,label:`Linked Tag Type`,visible:!1},{id:`stock`,label:`Stock`,visible:!1},{id:`remaining`,label:`Remaining`,visible:!0},{id:`spool_name`,label:`Spool`,visible:!1},{id:`cost_per_kg`,label:`Cost/kg`,visible:!1},{id:`weight_check`,label:`Weight Check`,visible:!1}];function J1e(){try{let e=localStorage.getItem(q1e);if(e){let t=JSON.parse(e),n=new Set(S9.map(e=>e.id)),r=new Set(t.map(e=>e.id)),i=[...t.filter(e=>n.has(e.id))];for(let e of S9){if(r.has(e.id))continue;let t=S9.indexOf(e),n=i.length;for(let e=t-1;e>=0;e--){let t=i.findIndex(t=>t.id===S9[e].id);if(t!==-1){n=t+1;break}}i.splice(n,0,e)}return i}}catch{}return S9.map(e=>({...e}))}function Y1e(e){try{localStorage.setItem(q1e,JSON.stringify(e))}catch{}}function C9(e,t=!1){return t&&e>=1e3?`${(e/1e3).toFixed(1)}kg`:`${Math.round(e)}g`}var X1e={PLA:`bg-green-100 dark:bg-green-500/20 text-green-700 dark:text-green-400`,ABS:`bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400`,PETG:`bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`,TPU:`bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-400`,ASA:`bg-orange-100 dark:bg-orange-500/20 text-orange-700 dark:text-orange-400`,PA:`bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`,PC:`bg-cyan-100 dark:bg-cyan-500/20 text-cyan-700 dark:text-cyan-400`,PET:`bg-sky-100 dark:bg-sky-500/20 text-sky-700 dark:text-sky-400`};function w9(e,t=`system`){if(!e)return`-`;let n=ep(e);return n?Kf(n,t):`-`}var Z1e={id:()=>`#`,added_time:()=>`Added`,encode_time:()=>`Encoded`,last_used_time:()=>`Last Used`,rgba:e=>e(`inventory.color`),material:e=>e(`inventory.material`),subtype:e=>e(`inventory.subtype`),color_name:e=>e(`inventory.colorName`),brand:e=>e(`inventory.brand`),slicer_filament:e=>e(`inventory.slicerFilament`),location:()=>`Location`,storage_location:e=>e(`inventory.storageLocation`),temperature:e=>e(`inventory.temperature`),humidity:e=>e(`inventory.humidity`),battery:e=>e(`inventory.battery`),label_weight:e=>e(`inventory.labelWeight`),net:e=>e(`inventory.net`),gross:()=>`Gross`,added_full:()=>`Full`,used:e=>e(`inventory.weightUsed`),printed_total:()=>`Printed Total`,printed_since_weight:()=>`Printed Since Weight`,note:e=>e(`inventory.note`),pa_k:()=>`PA(K)`,tag_id:()=>`Tag ID`,data_origin:()=>`Data Origin`,tag_type:()=>`Linked Tag Type`,stock:e=>e(`inventory.stock`),remaining:e=>e(`inventory.remaining`),spool_name:e=>e(`inventory.spoolName`),cost_per_kg:e=>e(`inventory.costPerKg`),weight_check:e=>e(`inventory.weightCheck`)},T9={id:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm font-medium text-white`,children:e.id}),added_time:({spool:e,dateFormat:t})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:w9(e.created_at,t)}),encode_time:({spool:e,dateFormat:t})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:w9(e.encode_time,t)}),last_used_time:({spool:e,dateFormat:t})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.last_used?w9(e.last_used,t):`Never`}),rgba:({spool:e})=>(0,G.jsx)(`div`,{className:`flex items-center justify-center`,children:(0,G.jsx)(AW,{rgba:e.rgba,extraColors:e.extra_colors,effectType:e.effect_type,effectSize:`table`,subtype:e.subtype})}),material:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-white`,children:e.material}),subtype:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.subtype||`-`}),color_name:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:Ef(e.color_name,e.rgba,e.color_name_is_synthesized)||`-`}),brand:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.brand||`-`}),slicer_filament:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,title:e.slicer_filament||void 0,children:e.slicer_filament_name||e.slicer_filament||`-`}),location:({spool:e,assignmentMap:t})=>{let n=t[e.id];if(!n)return(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:`-`});let r=n.printer_name||`Printer ${n.printer_id}`,i=n.ams_id===254||n.ams_id===255,a=!i&&n.ams_id>=128;return(0,G.jsxs)(`span`,{className:`inline-flex items-center px-1.5 py-0.5 rounded text-xs font-medium bg-purple-100 dark:bg-purple-500/20 text-purple-700 dark:text-purple-400`,children:[r,` `,Op(n.ams_id,n.tray_id,a,i),n.ams_label?` (${n.ams_label})`:``]})},storage_location:({spool:e})=>e.storage_location?(0,G.jsx)(`span`,{className:`inline-flex items-center px-1.5 py-0.5 rounded text-xs font-medium bg-blue-100 dark:bg-blue-500/20 text-blue-700 dark:text-blue-400`,children:e.storage_location}):(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:`-`}),temperature:({spool:e,locationReadingsMap:t,t:n,colorizeLocationSensors:r,locationSensorAboveColor:i,locationSensorBelowColor:a,locationSensorOptimalColor:o})=>{let s=e.location_id?t[e.location_id]?.find(e=>e.device_class===`temperature`):void 0;return s?(0,G.jsx)(`span`,{title:s.name,className:`text-sm ${k9(s,r,i,a,o)}`,children:O9(s,n)}):(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray/50`,children:`-`})},humidity:({spool:e,locationReadingsMap:t,t:n,colorizeLocationSensors:r,locationSensorAboveColor:i,locationSensorBelowColor:a,locationSensorOptimalColor:o})=>{let s=e.location_id?t[e.location_id]?.find(e=>e.device_class===`humidity`):void 0;return s?(0,G.jsx)(`span`,{title:s.name,className:`text-sm ${k9(s,r,i,a,o)}`,children:O9(s,n)}):(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray/50`,children:`-`})},battery:({spool:e,locationReadingsMap:t,t:n,colorizeLocationSensors:r,locationSensorAboveColor:i,locationSensorBelowColor:a,locationSensorOptimalColor:o})=>{let s=e.location_id?t[e.location_id]?.find(e=>e.device_class===`battery`):void 0;return s?(0,G.jsx)(`span`,{title:s.name,className:`text-sm ${k9(s,r,i,a,o)}`,children:O9(s,n)}):(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray/50`,children:`-`})},label_weight:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-white`,children:C9(e.label_weight)}),net:({remaining:e})=>(0,G.jsx)(`span`,{className:`text-sm text-white`,children:C9(e)}),gross:({spool:e,remaining:t})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:C9(t+e.core_weight)}),added_full:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.added_full==null?`-`:e.added_full?`Yes`:`No`}),used:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.weight_used>0?C9(e.weight_used):`-`}),printed_total:()=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray/50`,children:`-`}),printed_since_weight:()=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray/50`,children:`-`}),note:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray max-w-[150px] truncate block`,title:e.note||void 0,children:e.note||`-`}),pa_k:({spool:e})=>(e.k_profiles?.length??0)===0?(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:`-`}):(0,G.jsx)(`span`,{className:`inline-flex items-center px-1.5 py-0.5 rounded text-xs font-medium bg-bambu-green/20 text-bambu-green`,children:`K`}),tag_id:({spool:e})=>{let t=e.tag_uid||e.tray_uuid;return t?(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray font-mono`,title:t,children:t.length>12?`${t.slice(0,6)}...${t.slice(-4)}`:t}):(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray/50`,children:`-`})},data_origin:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.data_origin||`-`}),tag_type:({spool:e})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.tag_type||`-`}),stock:({spool:e,t})=>e.slicer_filament?(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:`-`}):(0,G.jsx)(`span`,{className:`inline-flex items-center px-1.5 py-0.5 rounded text-xs font-medium bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400`,children:t(`inventory.stock`)}),remaining:({remaining:e,pct:t})=>(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`div`,{className:`flex-1 h-2 bg-bambu-dark-tertiary rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full ${t>50?`bg-bambu-green`:t>20?`bg-yellow-500`:`bg-red-500`}`,style:{width:`${Math.min(t,100)}%`}})}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray min-w-[40px] text-right`,children:[Math.round(e),`g`]})]}),spool_name:({spool:e,catalogMap:t})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:(e.core_weight_catalog_id==null?void 0:t[e.core_weight_catalog_id])?.name||`-`}),cost_per_kg:({spool:e,currencySymbol:t})=>(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,children:e.cost_per_kg==null?`-`:`${t}${e.cost_per_kg.toFixed(2)}`}),weight_check:({spool:e,onSyncWeight:t})=>{let n=e.last_scale_weight;if(n==null)return(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray/50`,title:`No scale measurement`,children:`-`});let r=e.core_weight||0,i=Math.max(0,e.label_weight-e.weight_used)+r,a,o;n<r?(a=n-r,o=!0):(a=n-i,o=Math.abs(a)<=50);let s=a>0?`+${Math.round(a)}`:`${Math.round(a)}`,c=o?`Scale: ${Math.round(n)}g\nCalculated: ${Math.round(i)}g\nDifference: ${s}g (within tolerance)`:`Scale: ${Math.round(n)}g\nCalculated: ${Math.round(i)}g\nDifference: ${s}g (mismatch!)`;return(0,G.jsxs)(`div`,{className:`flex items-center gap-1 text-sm font-medium ${o?`text-green-700 dark:text-green-400`:`text-yellow-700 dark:text-yellow-400`}`,title:c,children:[(0,G.jsxs)(`span`,{children:[Math.round(n),`g`]}),o?(0,G.jsx)(fs,{className:`w-3 h-3`}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Iu,{className:`w-3 h-3`}),t&&(0,G.jsx)(`button`,{type:`button`,onClick:n=>{n.stopPropagation(),n.preventDefault(),t(e)},className:`p-1 hover:bg-bambu-green/20 rounded transition-colors text-bambu-green`,title:`Sync: trust scale weight and reset tracking`,children:(0,G.jsx)(Vl,{className:`w-3.5 h-3.5`})})]})]})}},E9={id:e=>e.id,added_time:e=>e.created_at||``,encode_time:e=>e.encode_time||``,last_used_time:e=>e.last_used||``,material:e=>(e.material||``).toLowerCase(),subtype:e=>(e.subtype||``).toLowerCase(),color_name:e=>(e.color_name||``).toLowerCase(),rgba:e=>wf(e.rgba),brand:e=>(e.brand||``).toLowerCase(),slicer_filament:e=>(e.slicer_filament_name||e.slicer_filament||``).toLowerCase(),location:(e,t)=>{let n=t[e.id];if(!n)return``;let r=n.ams_id===254||n.ams_id===255,i=!r&&n.ams_id>=128,a=n.ams_label?` (${n.ams_label})`:``;return`${n.printer_name||``} ${Op(n.ams_id,n.tray_id,i,r)}${a}`},storage_location:e=>(e.storage_location||``).toLowerCase(),label_weight:e=>e.label_weight,net:e=>Math.max(0,e.label_weight-e.weight_used),gross:e=>Math.max(0,e.label_weight-e.weight_used)+e.core_weight,used:e=>e.weight_used,remaining:e=>e.label_weight>0?Math.max(0,e.label_weight-e.weight_used)/e.label_weight:0,note:e=>(e.note||``).toLowerCase(),data_origin:e=>(e.data_origin||``).toLowerCase(),tag_type:e=>(e.tag_type||``).toLowerCase(),stock:e=>+!!e.slicer_filament,spool_name:e=>e.core_weight_catalog_id??0,cost_per_kg:e=>e.cost_per_kg??0,weight_check:e=>{if(e.last_scale_weight==null)return-1;let t=Math.max(0,e.label_weight-e.weight_used)+e.core_weight;return Math.abs(e.last_scale_weight-t)},temperature:(e,t,n)=>(e.location_id?n[e.location_id]:void 0)?.find(e=>e.device_class===`temperature`)?.value??-1/0,humidity:(e,t,n)=>(e.location_id?n[e.location_id]:void 0)?.find(e=>e.device_class===`humidity`)?.value??-1/0,battery:(e,t,n)=>(e.location_id?n[e.location_id]:void 0)?.find(e=>e.device_class===`battery`)?.value??-1/0},D9=`bambuddy-inventory-sort`;function Q1e(){try{let e=localStorage.getItem(D9);if(e)return JSON.parse(e)}catch{}return null}function $1e(e){try{e?localStorage.setItem(D9,JSON.stringify(e)):localStorage.removeItem(D9)}catch{}}function e0e(){let{data:e}=K({queryKey:[`spoolman-settings`],queryFn:Z.getSpoolmanSettings,staleTime:300*1e3}),t=e!==void 0;return(0,G.jsx)(t0e,{spoolmanMode:e?.spoolman_enabled===`true`&&!!e?.spoolman_url,spoolmanModeReady:t})}function t0e({spoolmanMode:e=!1,spoolmanModeReady:t=!0}){let{t:n}=U(),r=Mf(),i=co(),{showToast:a}=Gd(),{hasPermission:o,loading:s}=jd(),c=!s&&o(`inventory:forecast_read`),[l,u]=Ri(),[d,f]=(0,y.useState)(null),p=(0,y.useRef)(!1),[m,h]=(0,y.useState)(null),[g,_]=(0,y.useState)(null),[v,b]=(0,y.useState)(!1),[x,S]=(0,y.useState)(!1),[C,w]=(0,y.useState)(!1),[T,E]=(0,y.useState)(`active`),[D,O]=(0,y.useState)(`all`),[k,A]=(0,y.useState)(``),[j,M]=(0,y.useState)(``),[N,P]=(0,y.useState)(``),[F,I]=(0,y.useState)(``),[L,R]=(0,y.useState)(`all`),[z,B]=(0,y.useState)(``),[V,ee]=(0,y.useState)(`table`),[te,ne]=(0,y.useState)(Q1e),[re,ie]=(0,y.useState)(J1e),[ae,oe]=(0,y.useState)(!1),[se,H]=(0,y.useState)(()=>{try{return localStorage.getItem(`bambuddy-inventory-group`)===`true`}catch{return!1}}),[ce,le]=(0,y.useState)(new Set),[ue,de]=(0,y.useState)(new Set),[fe,pe]=(0,y.useState)(!1),[me,he]=(0,y.useState)(null),ge=(0,y.useCallback)(e=>{de(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},[]),_e=(0,y.useCallback)(()=>de(new Set),[]);(0,y.useEffect)(()=>{de(new Set)},[T,D,k,j,N,F,L,z]);let[ve,ye]=(0,y.useState)(0),[be,xe]=(0,y.useState)(()=>{try{let e=localStorage.getItem(`bambuddy-inventory-pageSize`);if(e){let t=Number(e);if([15,30,50,100,-1].includes(t))return t}}catch{}return 15}),{data:Se}=K({queryKey:[`settings`],queryFn:Z.getSettings}),Ce=Se?.date_format||`system`,we=(Se?.location_sensor_poll_interval||120)*1e3,{colorize:Te,aboveColor:Ee,belowColor:De,optimalColor:Oe}=TUe(),ke=e?[`spoolman-inventory-spools`]:[`inventory-spools`],Ae=()=>D8(i,ke),{data:je,isLoading:Me}=K({queryKey:ke,queryFn:()=>e?Z.getSpoolmanInventorySpools(!0):Z.getSpools(!0),refetchInterval:3e4}),Ne=(0,y.useCallback)(async()=>{S(!0);try{await Z.exportSpoolsCsv()}catch(e){a(e instanceof Error?e.message:n(`inventory.csv.exportError`,`Export failed`),`error`)}finally{S(!1)}},[a,n]),Pe=e?n(`inventory.csv.spoolmanHint`,`In Spoolman mode, use Spoolman's built-in CSV import/export.`):void 0,{data:Fe=[]}=K({queryKey:T8,queryFn:Z.getLocations}),Ie=l.get(`location_id`),Le=Ie===`__none__`?`__none__`:Ie&&/^\d+$/.test(Ie)&&Number(Ie)>0?Ie:``,Re=l.get(`spool`),ze=Re&&/^\d+$/.test(Re)&&Number(Re)>0?Number(Re):null,Be=je?.find(e=>e.id===ze)??null,Ve=(0,y.useCallback)(()=>{p.current=!0,u(e=>(e.delete(`spool`),e),{replace:!0})},[u]),{data:He,isError:Ue,error:We}=K({queryKey:e?[`spoolman-inventory-spool`,ze]:[`inventory-spool`,ze],queryFn:()=>e?Z.getSpoolmanInventorySpool(ze):Z.getSpool(ze),enabled:t&&ze!==null&&Be===null,staleTime:1/0,retry:(e,t)=>e<2&&!(t instanceof od&&t.status===404)});(0,y.useEffect)(()=>{if(!p.current){if(t&&ze&&Be){Ve(),f({spool:Be,mode:`edit`});return}if(He){Ve(),f({spool:He,mode:`edit`});return}Ue&&(Ve(),a(n(We instanceof od&&We.status===404?`inventory.deepLinkSpoolNotFound`:`inventory.deepLinkFetchFailed`),`error`))}},[t,ze,Be,He,Ue,We,Ve,a,n]);let{data:Ge}=K({queryKey:[`spool-assignments`],queryFn:()=>Z.getAssignments(),refetchInterval:3e4}),{data:Ke=[],isError:qe}=K({queryKey:[`spoolman-slot-assignments-all`],queryFn:()=>Z.getSpoolmanSlotAssignments(),enabled:e,refetchInterval:3e4,staleTime:1e4,retry:1}),Je=(0,y.useRef)(!1);(0,y.useEffect)(()=>{qe&&!Je.current?(Je.current=!0,a(n(`inventory.spoolmanUnreachable`),`error`)):qe||(Je.current=!1)},[qe,a,n]);let{data:Ye}=K({queryKey:[`spool-catalog`],queryFn:()=>Z.getSpoolCatalog()}),Xe=q({mutationFn:t=>e?Z.deleteSpoolmanInventorySpool(t):Z.deleteSpool(t),onSuccess:()=>{Ae(),a(n(`inventory.spoolDeleted`),`success`)},onError:e=>{e instanceof od&&e.status===404?a(n(`inventory.deleteSpoolNotFound`),`error`):e instanceof od&&e.status===503?a(n(`inventory.spoolmanUnreachable`),`error`):a(n(`inventory.deleteFailed`),`error`)}}),Ze=q({mutationFn:t=>e?Z.archiveSpoolmanInventorySpool(t):Z.archiveSpool(t),onSuccess:()=>{Ae(),a(n(`inventory.spoolArchived`),`success`)},onError:e=>{e instanceof od&&e.status===404?a(n(`inventory.archiveSpoolNotFound`),`error`):e instanceof od&&e.status===503?a(n(`inventory.spoolmanUnreachable`),`error`):a(n(`inventory.archiveFailed`),`error`)}}),Qe=q({mutationFn:t=>e?Z.restoreSpoolmanInventorySpool(t):Z.restoreSpool(t),onSuccess:()=>{Ae(),a(n(`inventory.spoolRestored`),`success`)},onError:e=>{e instanceof od&&e.status===404?a(n(`inventory.restoreSpoolNotFound`),`error`):e instanceof od&&e.status===503?a(n(`inventory.spoolmanUnreachable`),`error`):a(n(`inventory.restoreFailed`),`error`)}}),$e=q({mutationFn:t=>e?Z.resetSpoolmanInventorySpoolConsumedCounter(t):Z.resetSpoolConsumedCounter(t),onSuccess:()=>{i.invalidateQueries({queryKey:ke}),a(n(`inventory.consumedCounterReset`),`success`)},onError:()=>{a(n(`inventory.resetConsumedCounterFailed`),`error`)}}),et=q({mutationFn:t=>e?Z.bulkResetSpoolmanInventorySpoolConsumedCounter(t):Z.bulkResetSpoolConsumedCounter(t),onSuccess:e=>{i.invalidateQueries({queryKey:ke}),a(n(`inventory.allConsumedCountersReset`,{count:e.reset}),`success`),he(null),_e()},onError:()=>{a(n(`inventory.resetConsumedCounterFailed`),`error`)}}),tt=e=>(e.not_found?.length??0)+(e.errors?.length??0),nt=q({mutationFn:async({ids:t,update:n})=>e?Z.bulkUpdateSpoolmanInventorySpools(t,n):Z.bulkUpdateSpools(t,n),onSuccess:e=>{Ae();let t=tt(e);if(e.updated===0){a(n(`inventory.bulk.updateAllFailed`,{count:t}),`error`);return}t>0?a(n(`inventory.bulk.updatePartial`,{ok:e.updated,failed:t}),`warning`):a(n(`inventory.bulk.updateSuccess`,{count:e.updated}),`success`),pe(!1),_e()},onError:e=>{a(e.message||n(`inventory.bulk.updateFailed`),`error`)}}),rt=q({mutationFn:async t=>e?Z.bulkDeleteSpoolmanInventorySpools(t):Z.bulkDeleteSpools(t),onSuccess:e=>{Ae();let t=tt(e);if(e.deleted===0){a(n(`inventory.bulk.deleteAllFailed`,{count:t}),`error`);return}t>0?a(n(`inventory.bulk.deletePartial`,{ok:e.deleted,failed:t}),`warning`):a(n(`inventory.bulk.deleteSuccess`,{count:e.deleted}),`success`),he(null),_e()},onError:e=>{a(e.message||n(`inventory.bulk.deleteFailed`),`error`)}}),it=q({mutationFn:async t=>e?Z.bulkArchiveSpoolmanInventorySpools(t):Z.bulkArchiveSpools(t),onSuccess:e=>{Ae();let t=tt(e);if(e.archived===0&&t>0){a(n(`inventory.bulk.archiveAllFailed`,{count:t}),`error`);return}t>0?a(n(`inventory.bulk.archivePartial`,{ok:e.archived,failed:t}),`warning`):a(n(`inventory.bulk.archiveSuccess`,{count:e.archived}),`success`),he(null),_e()},onError:e=>{a(e.message||n(`inventory.bulk.archiveFailed`),`error`)}}),at=q({mutationFn:async t=>e?Z.bulkRestoreSpoolmanInventorySpools(t):Z.bulkRestoreSpools(t),onSuccess:e=>{Ae();let t=tt(e);if(e.restored===0&&t>0){a(n(`inventory.bulk.restoreAllFailed`,{count:t}),`error`);return}t>0?a(n(`inventory.bulk.restorePartial`,{ok:e.restored,failed:t}),`warning`):a(n(`inventory.bulk.restoreSuccess`,{count:e.restored}),`success`),he(null),_e()},onError:e=>{a(e.message||n(`inventory.bulk.restoreFailed`),`error`)}}),ot=(0,y.useMemo)(()=>(je??[]).map(e=>e.id),[je]),st=async t=>{if(t.last_scale_weight!=null)try{e?await Z.syncSpoolmanSpoolWeight(t.id,t.last_scale_weight):await Dd.updateSpoolWeight(t.id,t.last_scale_weight),i.invalidateQueries({queryKey:ke}),a(`Synced "${[t.brand,t.material,Ef(t.color_name,t.rgba,t.color_name_is_synthesized)].filter(Boolean).join(` `)}" to scale weight`,`success`)}catch(e){let t=e instanceof od&&e.status===404,r=e instanceof od&&e.status===503;a(n(t?`inventory.syncWeightSpoolNotFound`:r?`inventory.syncWeightSpoolmanUnreachable`:`inventory.syncWeightFailed`),`error`)}},ct=Se?.low_stock_threshold??20,[lt,ut]=(0,y.useState)(!1),[dt,ft]=(0,y.useState)(ct.toString());(0,y.useEffect)(()=>{lt||ft(ct.toString())},[ct,lt]);let pt=q({mutationFn:e=>Z.updateSettings({low_stock_threshold:e}),onSuccess:()=>{i.invalidateQueries({queryKey:[`settings`]}),a(n(`common.saved`),`success`),ut(!1)},onError:()=>{a(n(`inventory.lowStockThresholdError`),`error`)}}),mt=(0,y.useMemo)(()=>{if(!je)return null;let e=0,t=0,n=0,r=0,i={};for(let a of je){if(t+=Math.max(0,a.weight_used-(a.weight_used_baseline??0)),a.archived_at)continue;r++;let o=Math.max(0,a.label_weight-a.weight_used);e+=o,(a.label_weight>0?o/a.label_weight*100:0)<(a.low_stock_threshold_pct??ct)&&n++;let s=a.material||`Unknown`;i[s]||(i[s]={count:0,weight:0}),i[s].count++,i[s].weight+=o}return{totalWeight:e,totalConsumed:t,lowStock:n,byMaterial:i,totalSpools:r}},[je,ct]),ht=(Ge?.length??0)+(e?Ke.length:0),gt=Pf(Se?.currency||`USD`),_t=(0,y.useMemo)(()=>{let e={};for(let t of Ge||[])e[t.spool_id]={printer_id:t.printer_id,printer_name:t.printer_name,ams_id:t.ams_id,tray_id:t.tray_id,ams_label:t.ams_label??null};for(let t of Ke)typeof t?.spoolman_spool_id!=`number`||t.spoolman_spool_id<=0||typeof t.printer_id!=`number`||typeof t.ams_id!=`number`||typeof t.tray_id!=`number`||e[t.spoolman_spool_id]||(e[t.spoolman_spool_id]={printer_id:t.printer_id,printer_name:t.printer_name??null,ams_id:t.ams_id,tray_id:t.tray_id,ams_label:t.ams_label??null});return e},[Ge,Ke]),vt=(0,y.useMemo)(()=>{let e={};for(let t of Ye||[])e[t.id]=t;return e},[Ye]),{data:yt}=K({queryKey:[`locationHaSensors`],queryFn:()=>Z.getLocationHASensors()}),bt=(0,y.useMemo)(()=>new Set((yt??[]).map(e=>e.location_id)),[yt]),xt=(0,y.useMemo)(()=>{let e=new Set;for(let t of je||[])t.location_id&&bt.has(t.location_id)&&e.add(t.location_id);return Array.from(e)},[je,bt]),St=V===`cards`||V===`table`&&re.some(e=>e.visible&&(e.id===`temperature`||e.id===`humidity`||e.id===`battery`)),Ct=Co({queries:xt.map(e=>({queryKey:[`locationHaSensorReadings`,e],queryFn:()=>Z.getLocationHASensorReadings(e,!1),refetchInterval:we,enabled:St}))}),wt=(0,y.useMemo)(()=>{let e={};return xt.forEach((t,n)=>{let r=Ct[n]?.data;r&&(e[t]=r)}),e},[xt,Ct]),Tt=(0,y.useMemo)(()=>mt?Object.entries(mt.byMaterial).sort((e,t)=>t[1].weight-e[1].weight).slice(0,4):[],[mt]),Et=(0,y.useMemo)(()=>{let e=je||[];if(e=T===`active`?e.filter(e=>!e.archived_at):e.filter(e=>!!e.archived_at),D===`used`?e=e.filter(e=>e.weight_used>0):D===`new`?e=e.filter(e=>e.weight_used===0):D===`lowstock`&&(e=e.filter(e=>{let t=Math.max(0,e.label_weight-e.weight_used);return(e.label_weight>0?t/e.label_weight*100:0)<(e.low_stock_threshold_pct??ct)})),k&&(e=e.filter(e=>e.material===k)),j&&(e=e.filter(e=>e.brand===j)),N&&(e=N===`__none__`?e.filter(e=>!e.category):e.filter(e=>e.category===N)),F){let t=Number(F);e=e.filter(e=>e.core_weight_catalog_id===t)}if(Le)if(Le===`__none__`)e=e.filter(e=>!e.location_id&&!e.storage_location?.trim());else{let t=Number(Le),n=Fe.find(e=>e.id===t)?.name?.trim().toLowerCase();e=e.filter(e=>e.location_id==null?n?(e.storage_location||``).trim().toLowerCase()===n:!1:e.location_id===t)}return L===`stock`?e=e.filter(e=>!e.slicer_filament):L===`configured`&&(e=e.filter(e=>!!e.slicer_filament)),z&&(e=DU(e,z)),e},[je,T,D,k,j,N,F,L,Le,z,ct,Fe,r]),Dt=()=>ye(0),Ot=(0,y.useCallback)(e=>{u(t=>(t.delete(`location_id`),e&&t.set(`location_id`,e),t),{replace:!0}),Dt()},[u]),kt=[...new Set(je?.map(e=>e.material)||[])].sort(),At=[...new Set(je?.map(e=>e.brand).filter(Boolean)||[])].sort(),jt=[...new Set(je?.map(e=>e.category?.trim()).filter(Boolean)||[])].sort(),Mt=(je??[]).some(e=>!e.category),Nt=[...new Set(je?.map(e=>e.core_weight_catalog_id).filter(e=>e!=null)||[])].sort((e,t)=>{let n=(vt[e]?.name||``).toLowerCase(),r=(vt[t]?.name||``).toLowerCase();return n.localeCompare(r)}),Pt=(je??[]).some(e=>!e.location_id&&!e.storage_location?.trim()),Ft=T!==`active`||D!==`all`||!!k||!!j||!!N||!!F||!!Le||L!==`all`||!!z,It=e=>{ie(e),Y1e(e)},Lt=(0,y.useMemo)(()=>re.filter(e=>e.visible).map(e=>e.id),[re]),Rt=e=>{E9[e]&&(ne(t=>{let n;return n=t?.column===e?t.direction===`asc`?{column:e,direction:`desc`}:null:{column:e,direction:`asc`},$1e(n),n}),Dt())},zt=(0,y.useMemo)(()=>{if(!te)return Et;let e=E9[te.column];return e?[...Et].sort((t,n)=>{let r=e(t,_t,wt),i=e(n,_t,wt);return r<i?te.direction===`asc`?-1:1:r>i?te.direction===`asc`?1:-1:0}):Et},[Et,te,_t,wt]),Bt=(0,y.useMemo)(()=>{if(!se)return zt.map(e=>({type:`single`,spool:e}));let e=new Map;for(let t of zt)if(!(t.weight_used>0||_t[t.id])){let n=K1e(t),r=e.get(n);r?r.push(t):e.set(n,[t])}let t=[],n=new Set;for(let r of zt){if(r.weight_used>0||_t[r.id]){t.push({type:`single`,spool:r});continue}let i=K1e(r);if(n.has(i))continue;n.add(i);let a=e.get(i);a.length===1?t.push({type:`single`,spool:a[0]}):t.push({type:`group`,key:i,spools:a,representative:a[0]})}return t},[zt,se,_t]),Vt=be===-1,Ht=Bt.length,Ut=Vt?Ht||1:be,Wt=Math.max(1,Math.ceil(Ht/Ut)),Gt=Vt?0:Math.min(ve,Wt-1),Kt=Vt?Bt:Bt.slice(Gt*Ut,(Gt+1)*Ut),qt=()=>{let e=!se;H(e),le(new Set),Dt();try{localStorage.setItem(`bambuddy-inventory-group`,String(e))}catch{}},Jt=e=>{le(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},Yt=e=>{xe(e),ye(0);try{localStorage.setItem(`bambuddy-inventory-pageSize`,String(e))}catch{}};return(0,G.jsxs)(`div`,{className:`p-4 md:p-8 space-y-6`,children:[(0,G.jsxs)(`div`,{className:`flex flex-col gap-4 sm:flex-row sm:items-center sm:justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(Sl,{className:`w-7 h-7 text-bambu-green`}),n(`inventory.title`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:n(`inventory.subtitle`)})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2`,children:[(0,G.jsxs)(Q,{variant:`secondary`,disabled:e,onClick:()=>b(!0),title:Pe,children:[(0,G.jsx)(Bu,{className:`w-4 h-4`}),n(`inventory.csv.importButton`,`Import CSV`)]}),(0,G.jsxs)(Q,{variant:`secondary`,disabled:e||x,onClick:Ne,title:Pe,children:[x?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(Ys,{className:`w-4 h-4`}),n(`inventory.csv.exportButton`,`Export CSV`)]}),(0,G.jsxs)(Q,{variant:`secondary`,onClick:()=>w(!0),children:[(0,G.jsx)(al,{className:`w-4 h-4`}),n(`locations.manage`)]}),(0,G.jsxs)(Q,{variant:`secondary`,disabled:Et.length===0,onClick:()=>_(Et.map(e=>e.id)),title:Et.length===0?n(`inventory.labels.noSpoolsTitle`,`No spools to label`):n(`inventory.labels.bulkTitle`,`Pick spools to print labels for from the {{count}} currently shown`,{count:Et.length}),children:[(0,G.jsx)(Ll,{className:`w-4 h-4`}),n(`inventory.labels.printLabels`,`Print labels…`)]}),(0,G.jsxs)(Q,{onClick:()=>f({spool:null,mode:`create`}),children:[(0,G.jsx)(Pl,{className:`w-4 h-4`}),n(`inventory.addSpool`)]})]})]}),mt&&!Me&&(0,G.jsxs)(`div`,{className:`grid grid-cols-2 md:grid-cols-3 lg:grid-cols-5 gap-3`,children:[(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1`,children:[(0,G.jsx)(Sl,{className:`w-4 h-4 text-bambu-green`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray font-medium uppercase tracking-wide`,children:n(`inventory.totalInventory`)})]}),(0,G.jsx)(`div`,{className:`text-xl font-bold text-white`,children:C9(mt.totalWeight,!0)}),(0,G.jsxs)(`div`,{className:`text-xs text-bambu-gray mt-1`,children:[mt.totalSpools,` `,mt.totalSpools===1?n(`inventory.spool`):n(`inventory.spools`)]})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between gap-2 mb-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(Pu,{className:`w-4 h-4 text-blue-600 dark:text-blue-400`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray font-medium uppercase tracking-wide`,children:n(`inventory.totalConsumed`)})]}),mt.totalConsumed>0&&ot.length>0&&(0,G.jsx)(`button`,{onClick:()=>h({type:`reset-all-consumed-counters`}),className:`p-1 text-bambu-gray hover:text-red-600 dark:hover:text-red-400 rounded transition-colors`,title:n(`inventory.resetAllConsumedCountersTooltip`),"aria-label":n(`inventory.resetAllConsumedCounters`),children:(0,G.jsx)(tc,{className:`w-3.5 h-3.5`})})]}),(0,G.jsx)(`div`,{className:`text-xl font-bold text-white`,children:C9(mt.totalConsumed,!0)}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mt-1`,children:n(`inventory.sinceTracking`)})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1`,children:[(0,G.jsx)(qc,{className:`w-4 h-4 text-green-600 dark:text-green-400`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray font-medium uppercase tracking-wide`,children:n(`inventory.byMaterial`)})]}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-1.5 mt-1`,children:Tt.map(([e,t])=>(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 px-2 py-0.5 rounded-full text-xs font-medium ${X1e[e]||`bg-bambu-dark-tertiary text-bambu-gray`}`,children:[e,` `,(0,G.jsx)(`span`,{className:`opacity-70`,children:C9(t.weight,!0)})]},e))})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1`,children:[(0,G.jsx)(Ll,{className:`w-4 h-4 text-purple-600 dark:text-purple-400`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray font-medium uppercase tracking-wide`,children:n(`inventory.inPrinter`)})]}),(0,G.jsx)(`div`,{className:`text-xl font-bold text-white`,children:ht}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mt-1`,children:n(`inventory.loadedInAms`)})]}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1`,children:[(0,G.jsx)(Iu,{className:`w-4 h-4 text-yellow-600 dark:text-yellow-400`}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray font-medium uppercase tracking-wide`,children:n(`inventory.lowStock`)})]}),(0,G.jsx)(`div`,{className:`text-xl font-bold ${mt.lowStock>0?`text-yellow-700 dark:text-yellow-400`:`text-white`}`,children:mt.lowStock}),(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray mt-1 flex items-center gap-2`,children:lt?(0,G.jsxs)(`form`,{onSubmit:e=>{e.preventDefault();let t=parseFloat(dt);!isNaN(t)&&t>=.1&&t<=99.9?pt.mutate(t):a(n(`inventory.lowStockThresholdError`),`error`)},className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`<`}),(0,G.jsx)(`input`,{type:`text`,inputMode:`decimal`,pattern:`^\\d{0,2}(\\.\\d?)?$`,maxLength:4,value:dt,onChange:e=>{let t=e.target.value.replace(/[^\d.]/g,``);/^\d{0,2}(\.\d?)?$/.test(t)&&ft(t)},className:`px-1.5 py-1 rounded border border-bambu-dark-tertiary text-xs text-white bg-bambu-dark-secondary focus:outline-none focus:border-bambu-green w-14 text-center`,onWheel:e=>e.currentTarget.blur(),disabled:pt.isPending}),(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:`%`}),(0,G.jsx)(Q,{type:`submit`,size:`sm`,disabled:pt.isPending,children:n(`common.save`)}),(0,G.jsx)(Q,{type:`button`,size:`sm`,variant:`ghost`,onClick:()=>ut(!1),disabled:pt.isPending,children:n(`common.cancel`)})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`span`,{className:`text-bambu-gray`,children:[`< `,ct,`%`]}),(0,G.jsx)(`button`,{className:`p-1.5 text-bambu-gray hover:text-white rounded transition-colors`,title:n(`common.edit`),onClick:()=>{ft(ct.toString()),ut(!0)},children:(0,G.jsx)(Ol,{className:`w-4 h-4`})})]})})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-col sm:flex-row gap-3 items-start sm:items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1 max-w-md ${V===`forecast`?`invisible pointer-events-none`:``}`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray/50`}),(0,G.jsx)(`input`,{type:`text`,value:z,onChange:e=>{B(e.target.value),Dt()},placeholder:n(`inventory.search`),className:`w-full pl-10 pr-8 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white text-sm placeholder:text-bambu-gray/50 focus:outline-none focus:border-bambu-green`}),z&&(0,G.jsx)(`button`,{onClick:()=>{B(``),Dt()},className:`absolute right-3 top-1/2 -translate-y-1/2 text-bambu-gray hover:text-white`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[V===`table`&&(0,G.jsxs)(`button`,{onClick:()=>oe(!0),className:`flex items-center gap-1.5 px-3 py-1.5 text-sm font-medium text-bambu-gray border border-bambu-dark-tertiary rounded-lg hover:bg-bambu-dark-tertiary transition-colors`,title:n(`inventory.configureColumns`),children:[(0,G.jsx)(zs,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:n(`inventory.columns`)})]}),V!==`forecast`&&(0,G.jsxs)(`button`,{onClick:qt,className:`flex items-center gap-1.5 px-3 py-1.5 text-sm font-medium border rounded-lg transition-colors ${se?`bg-bambu-green/20 text-bambu-green border-bambu-green/30`:`text-bambu-gray border-bambu-dark-tertiary hover:bg-bambu-dark-tertiary`}`,title:n(`inventory.groupSimilar`),children:[(0,G.jsx)(jc,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:n(`inventory.groupSimilar`)})]}),(0,G.jsxs)(`div`,{className:`flex bg-bambu-dark-primary border border-bambu-dark-tertiary rounded-lg overflow-hidden`,children:[(0,G.jsxs)(`button`,{onClick:()=>ee(`table`),className:`flex items-center gap-1.5 px-3 py-1.5 text-sm font-medium transition-colors ${V===`table`?`bg-bambu-green text-white`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(wu,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:n(`inventory.table`)})]}),(0,G.jsxs)(`button`,{onClick:()=>ee(`cards`),className:`flex items-center gap-1.5 px-3 py-1.5 text-sm font-medium transition-colors ${V===`cards`?`bg-bambu-green text-white`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(Jc,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:n(`inventory.cards`)})]}),(0,G.jsxs)(`button`,{onClick:()=>c&&ee(`forecast`),disabled:!c,title:c?void 0:n(`forecast.noReadAccess`),className:`flex items-center gap-1.5 px-3 py-1.5 text-sm font-medium transition-colors disabled:opacity-40 disabled:cursor-not-allowed ${V===`forecast`?`bg-bambu-green text-white`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:[c?(0,G.jsx)(Fu,{className:`w-4 h-4`}):(0,G.jsx)(tl,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`hidden sm:inline`,children:n(`forecast.title`)})]})]})]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2 ${V===`forecast`?`hidden`:``}`,children:[(0,G.jsxs)(`div`,{className:`flex items-center rounded-lg border border-bambu-dark-tertiary overflow-hidden`,children:[(0,G.jsxs)(`button`,{onClick:()=>{E(`active`),Dt()},className:`flex items-center gap-1.5 px-3 py-1.5 text-xs font-medium transition-colors ${T===`active`?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(Sl,{className:`w-3.5 h-3.5`}),n(`inventory.active`)]}),(0,G.jsxs)(`button`,{onClick:()=>{E(`archived`),Dt()},className:`flex items-center gap-1.5 px-3 py-1.5 text-xs font-medium transition-colors ${T===`archived`?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(Po,{className:`w-3.5 h-3.5`}),n(`inventory.archived`)]})]}),(0,G.jsx)(`div`,{className:`w-px h-5 bg-bambu-dark-tertiary`}),(0,G.jsxs)(`div`,{className:`flex items-center rounded-lg border border-bambu-dark-tertiary overflow-hidden`,children:[(0,G.jsx)(`button`,{onClick:()=>{O(`all`),Dt()},className:`px-3 py-1.5 text-xs font-medium transition-colors ${D===`all`?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:n(`inventory.all`)}),(0,G.jsxs)(`button`,{onClick:()=>{O(`used`),Dt()},className:`flex items-center gap-1.5 px-3 py-1.5 text-xs font-medium transition-colors ${D===`used`?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(js,{className:`w-3.5 h-3.5`}),n(`inventory.used`)]}),(0,G.jsx)(`button`,{onClick:()=>{O(`new`),Dt()},className:`px-3 py-1.5 text-xs font-medium transition-colors ${D===`new`?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:n(`inventory.new`)}),(0,G.jsxs)(`button`,{onClick:()=>{O(`lowstock`),Dt()},className:`flex items-center gap-1.5 px-3 py-1.5 text-xs font-medium transition-colors ${D===`lowstock`?`bg-yellow-100 dark:bg-yellow-500/20 text-yellow-700 dark:text-yellow-400`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(Iu,{className:`w-3.5 h-3.5`}),n(`inventory.lowStock`)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center rounded-lg border border-bambu-dark-tertiary overflow-hidden`,children:[(0,G.jsx)(`button`,{onClick:()=>{R(`all`),Dt()},className:`px-3 py-1.5 text-xs font-medium transition-colors ${L===`all`?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:n(`inventory.all`)}),(0,G.jsx)(`button`,{onClick:()=>{R(`stock`),Dt()},className:`px-3 py-1.5 text-xs font-medium transition-colors ${L===`stock`?`bg-amber-100 dark:bg-amber-500/20 text-amber-700 dark:text-amber-400`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:n(`inventory.stock`)}),(0,G.jsx)(`button`,{onClick:()=>{R(`configured`),Dt()},className:`px-3 py-1.5 text-xs font-medium transition-colors ${L===`configured`?`bg-bambu-green/20 text-bambu-green`:`text-bambu-gray hover:bg-bambu-dark-tertiary`}`,children:n(`inventory.configured`)})]}),(0,G.jsx)(`div`,{className:`w-px h-5 bg-bambu-dark-tertiary`}),(0,G.jsxs)(`select`,{value:k,onChange:e=>{A(e.target.value),Dt()},className:`px-3 py-1.5 rounded-lg border text-xs font-medium transition-colors cursor-pointer focus:outline-none ${k?`bg-bambu-green/20 text-bambu-green border-bambu-green/30`:`bg-transparent text-bambu-gray border-bambu-dark-tertiary hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(`option`,{value:``,children:n(`inventory.material`)}),kt.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]}),(0,G.jsxs)(`select`,{value:j,onChange:e=>{M(e.target.value),Dt()},className:`px-3 py-1.5 rounded-lg border text-xs font-medium transition-colors cursor-pointer focus:outline-none ${j?`bg-bambu-green/20 text-bambu-green border-bambu-green/30`:`bg-transparent text-bambu-gray border-bambu-dark-tertiary hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(`option`,{value:``,children:n(`inventory.brand`)}),At.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))]}),(jt.length>0||N)&&(0,G.jsxs)(`select`,{value:N,onChange:e=>{P(e.target.value),Dt()},className:`px-3 py-1.5 rounded-lg border text-xs font-medium transition-colors cursor-pointer focus:outline-none ${N?`bg-bambu-green/20 text-bambu-green border-bambu-green/30`:`bg-transparent text-bambu-gray border-bambu-dark-tertiary hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(`option`,{value:``,children:n(`inventory.category`)}),jt.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e)),Mt&&(0,G.jsx)(`option`,{value:`__none__`,children:n(`inventory.categoryNone`)})]}),Nt.length>0&&(0,G.jsxs)(`select`,{value:F,onChange:e=>{I(e.target.value),Dt()},className:`px-3 py-1.5 rounded-lg border text-xs font-medium transition-colors cursor-pointer focus:outline-none ${F?`bg-bambu-green/20 text-bambu-green border-bambu-green/30`:`bg-transparent text-bambu-gray border-bambu-dark-tertiary hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(`option`,{value:``,children:n(`inventory.spoolName`)}),Nt.map(e=>(0,G.jsx)(`option`,{value:e,children:vt[e]?.name||`#${e}`},e))]}),(Fe.length>0||Le)&&(0,G.jsxs)(`select`,{value:Le,onChange:e=>{Ot(e.target.value)},className:`px-3 py-1.5 rounded-lg border text-xs font-medium transition-colors cursor-pointer focus:outline-none ${Le?`bg-bambu-green/20 text-bambu-green border-bambu-green/30`:`bg-transparent text-bambu-gray border-bambu-dark-tertiary hover:bg-bambu-dark-tertiary`}`,children:[(0,G.jsx)(`option`,{value:``,children:n(`inventory.storageLocation`)}),Fe.map(e=>(0,G.jsx)(`option`,{value:String(e.id),children:e.name},e.id)),Pt&&(0,G.jsx)(`option`,{value:`__none__`,children:n(`inventory.storageLocationNone`)})]}),Ft&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`w-px h-5 bg-bambu-dark-tertiary`}),(0,G.jsxs)(`button`,{onClick:()=>{E(`active`),O(`all`),A(``),M(``),P(``),I(``),R(`all`),B(``),u(e=>(e.delete(`location_id`),e),{replace:!0}),Dt()},className:`flex items-center gap-1 text-xs text-bambu-gray hover:text-bambu-green transition-colors`,children:[(0,G.jsx)(td,{className:`w-3.5 h-3.5`}),n(`inventory.clearFilters`)]})]}),V!==`forecast`&&(0,G.jsxs)(`span`,{className:`ml-auto text-xs text-bambu-gray`,children:[zt.length,` `,zt.length===1?n(`inventory.spool`):n(`inventory.spools`),se&&Ht<zt.length&&` (${Ht} ${n(`inventory.groupedRows`)})`]})]}),ue.size>0&&V!==`forecast`&&(0,G.jsxs)(`div`,{className:`sticky top-2 z-10 mb-4 flex items-center gap-2 px-3 py-2 bg-bambu-green/10 border border-bambu-green/30 rounded-lg backdrop-blur-sm`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-green font-medium`,children:n(`inventory.bulk.selectionCount`,{count:ue.size})}),(0,G.jsxs)(`div`,{className:`ml-auto flex flex-wrap items-center gap-2`,children:[(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>pe(!0),children:[(0,G.jsx)(Ol,{className:`w-3.5 h-3.5 mr-1.5`}),n(`inventory.bulk.edit`)]}),(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>_([...ue]),children:[(0,G.jsx)(Ll,{className:`w-3.5 h-3.5 mr-1.5`}),n(`inventory.bulk.printLabels`)]}),(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>he(`reset-consumed-counter`),children:[(0,G.jsx)(tc,{className:`w-3.5 h-3.5 mr-1.5`}),n(`inventory.bulk.resetUsage`)]}),T===`archived`?(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>he(`restore`),children:[(0,G.jsx)(Ul,{className:`w-3.5 h-3.5 mr-1.5`}),n(`inventory.bulk.restore`)]}):(0,G.jsxs)(Q,{size:`sm`,variant:`secondary`,onClick:()=>he(`archive`),children:[(0,G.jsx)(Po,{className:`w-3.5 h-3.5 mr-1.5`}),n(`inventory.bulk.archive`)]}),(0,G.jsxs)(Q,{size:`sm`,variant:`danger`,onClick:()=>he(`delete`),children:[(0,G.jsx)(Nu,{className:`w-3.5 h-3.5 mr-1.5`}),n(`inventory.bulk.delete`)]}),(0,G.jsx)(`button`,{className:`p-1.5 text-bambu-gray hover:text-white rounded transition-colors`,onClick:_e,title:n(`inventory.bulk.clearSelection`),"aria-label":n(`inventory.bulk.clearSelection`),children:(0,G.jsx)(td,{className:`w-4 h-4`})})]})]}),Me?(0,G.jsx)(`div`,{className:`flex justify-center py-16`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})}):V===`forecast`?(0,G.jsx)(n1e,{spools:je||[]}):V===`cards`?Kt.length>0?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 lg:grid-cols-3 xl:grid-cols-4 gap-4`,children:Kt.map(e=>{if(e.type===`group`){let{key:t,spools:r,representative:i}=e,a=r.reduce((e,t)=>e+Math.max(0,t.label_weight-t.weight_used),0),o=CU({rgba:i.rgba,extraColors:i.extra_colors,effectType:i.effect_type,subtype:i.subtype,effectSize:`groupheader`}),s=ce.has(t);return(0,G.jsxs)(`div`,{className:`col-span-full`,children:[(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg overflow-hidden border border-bambu-green/30 hover:border-bambu-green transition-colors cursor-pointer`,onClick:()=>Jt(t),children:[(0,G.jsx)(`div`,{className:`h-10 flex items-center px-4 gap-3`,style:o,children:(0,G.jsx)(`span`,{className:`bg-white/90 text-gray-800 px-3 py-0.5 rounded-full text-sm font-medium`,children:Ef(i.color_name,i.rgba,i.color_name_is_synthesized)||`-`})}),(0,G.jsxs)(`div`,{className:`px-4 py-3 flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray transition-transform ${s?``:`-rotate-90`}`}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h3`,{className:`font-semibold text-white`,children:[i.material,i.subtype?` ${i.subtype}`:``]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:i.brand||`-`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray`,title:n(`inventory.remaining`),children:C9(a)}),(0,G.jsx)(`span`,{className:`text-xs font-medium bg-bambu-green/20 text-bambu-green px-2 py-0.5 rounded-full`,children:n(`inventory.groupedSpools`,{count:r.length})})]})]})]}),s&&(0,G.jsx)(`div`,{className:`grid grid-cols-1 sm:grid-cols-2 lg:grid-cols-3 xl:grid-cols-4 gap-4 mt-2 ml-4`,children:r.map(e=>{let t=Math.max(0,e.label_weight-e.weight_used);return(0,G.jsx)(r0e,{spool:e,remaining:t,pct:e.label_weight>0?t/e.label_weight*100:0,onClick:()=>f({spool:e,mode:`edit`}),onPrintLabel:()=>_([e.id]),onCopy:()=>f({spool:e,mode:`copy`}),t:n,colorizeLocationSensors:Te,locationSensorAboveColor:Ee,locationSensorBelowColor:De,locationSensorOptimalColor:Oe},e.id)})})]},`group-${t}`)}let t=e.spool,r=Math.max(0,t.label_weight-t.weight_used);return(0,G.jsx)(r0e,{spool:t,remaining:r,pct:t.label_weight>0?r/t.label_weight*100:0,onClick:()=>f({spool:t,mode:`edit`}),onPrintLabel:()=>_([t.id]),onCopy:()=>f({spool:t,mode:`copy`}),t:n,colorizeLocationSensors:Te,locationSensorAboveColor:Ee,locationSensorBelowColor:De,locationSensorOptimalColor:Oe},t.id)})}),(0,G.jsx)(n0e,{pageIndex:Gt,pageSize:be,totalRows:Ht,totalPages:Wt,onPageChange:ye,onPageSizeChange:Yt,t:n})]}):(0,G.jsx)(l0e,{hasFilters:Ft,onAddSpool:()=>f({spool:null,mode:`create`}),t:n}):Kt.length>0?(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg overflow-hidden border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`div`,{className:`overflow-x-auto`,children:(0,G.jsxs)(`table`,{className:`w-full`,children:[(0,G.jsx)(`thead`,{children:(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary bg-bambu-dark-tertiary/30`,children:[(0,G.jsx)(`th`,{className:`w-10 px-3 py-3`,children:(0,G.jsx)(`input`,{type:`checkbox`,className:`h-4 w-4 cursor-pointer`,"aria-label":n(`inventory.bulk.selectAllVisible`),checked:Kt.length>0&&Kt.every(e=>(e.type===`group`?e.spools.map(e=>e.id):[e.spool.id]).every(e=>ue.has(e))),onChange:e=>{if(e.target.checked){let e=new Set(ue);for(let t of Kt){let n=t.type===`group`?t.spools.map(e=>e.id):[t.spool.id];for(let t of n)e.add(t)}de(e)}else{let e=new Set(ue);for(let t of Kt){let n=t.type===`group`?t.spools.map(e=>e.id):[t.spool.id];for(let t of n)e.delete(t)}de(e)}}})}),Lt.map(e=>{let t=!!E9[e],r=te?.column===e;return(0,G.jsx)(`th`,{className:`text-left py-3 px-4 text-xs font-medium uppercase tracking-wide select-none ${e===`remaining`?`min-w-[150px]`:``} ${t?`cursor-pointer hover:text-bambu-green transition-colors`:``} ${r?`text-bambu-green`:`text-bambu-gray`}`,onClick:t?()=>Rt(e):void 0,children:(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1`,children:[Z1e[e]?.(n)??e,t&&(r?te.direction===`asc`?(0,G.jsx)(Ho,{className:`w-3 h-3`}):(0,G.jsx)(Io,{className:`w-3 h-3`}):(0,G.jsx)(Bo,{className:`w-3 h-3 opacity-30`}))]})},e)}),(0,G.jsx)(`th`,{className:`text-right py-3 px-4 text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:n(`common.actions`)})]})}),(0,G.jsx)(`tbody`,{children:Kt.map(e=>{if(e.type===`group`){let{key:t,spools:r}=e,i=ce.has(t),a=G1e(r),o=Math.max(0,a.label_weight-a.weight_used);return(0,G.jsx)(c0e,{spools:r,headerSpool:a,remaining:o,pct:a.label_weight>0?o/a.label_weight*100:0,isExpanded:i,onToggle:()=>Jt(t),selectedIds:ue,onToggleSelected:ge,onToggleGroupSelected:(e,t)=>{de(n=>{let r=new Set(n);for(let n of e)t?r.add(n):r.delete(n);return r})},onEdit:e=>f({spool:e,mode:`edit`}),onCopy:e=>f({spool:e,mode:`copy`}),onArchive:e=>h({type:`archive`,spoolId:e}),onDelete:e=>h({type:`delete`,spoolId:e}),onPrintLabel:e=>_([e]),onResetConsumedCounter:e=>h({type:`reset-consumed-counter`,spoolId:e}),visibleColumns:Lt,assignmentMap:_t,catalogMap:vt,locationReadingsMap:wt,currencySymbol:gt,dateFormat:Ce,t:n,onSyncWeight:st,colorizeLocationSensors:Te,locationSensorAboveColor:Ee,locationSensorBelowColor:De,locationSensorOptimalColor:Oe},`group-${t}`)}let t=e.spool,r=Math.max(0,t.label_weight-t.weight_used);return(0,G.jsx)(s0e,{spool:t,remaining:r,pct:t.label_weight>0?r/t.label_weight*100:0,isSelected:ue.has(t.id),onToggleSelected:()=>ge(t.id),onEdit:()=>f({spool:t,mode:`edit`}),onCopy:()=>f({spool:t,mode:`copy`}),onRestore:()=>Qe.mutate(t.id),onArchive:()=>h({type:`archive`,spoolId:t.id}),onDelete:()=>h({type:`delete`,spoolId:t.id}),onPrintLabel:()=>_([t.id]),onResetConsumedCounter:()=>h({type:`reset-consumed-counter`,spoolId:t.id}),visibleColumns:Lt,assignmentMap:_t,catalogMap:vt,locationReadingsMap:wt,currencySymbol:gt,dateFormat:Ce,t:n,onSyncWeight:st,colorizeLocationSensors:Te,locationSensorAboveColor:Ee,locationSensorBelowColor:De,locationSensorOptimalColor:Oe},t.id)})})]})}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-4 py-3 bg-bambu-dark-tertiary/50 border-t border-bambu-dark-tertiary text-sm`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:Vt?`${Ht} ${n(Ht===1?`inventory.spool`:`inventory.spools`)}`:(0,G.jsxs)(G.Fragment,{children:[n(`inventory.showing`),` `,Gt*Ut+1,` `,n(`inventory.to`),` `,Math.min((Gt+1)*Ut,Ht),` `,n(`inventory.of`),` `,Ht,` `,n(`inventory.spools`)]})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:n(`inventory.show`)}),(0,G.jsxs)(`select`,{value:be,onChange:e=>Yt(Number(e.target.value)),className:`px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:outline-none focus:border-bambu-green`,children:[[15,30,50,100].map(e=>(0,G.jsx)(`option`,{value:e,children:e},e)),(0,G.jsx)(`option`,{value:-1,children:n(`inventory.all`)})]}),!Vt&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`button`,{onClick:()=>ye(0),disabled:Gt===0,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,title:`First page`,children:(0,G.jsx)(_s,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>ye(e=>Math.max(0,e-1)),disabled:Gt===0,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,children:(0,G.jsx)(hs,{className:`w-4 h-4`})}),(0,G.jsxs)(`span`,{className:`text-bambu-gray px-2 whitespace-nowrap`,children:[n(`inventory.page`),` `,Gt+1,` `,n(`inventory.of`),` `,Wt]}),(0,G.jsx)(`button`,{onClick:()=>ye(e=>Math.min(Wt-1,e+1)),disabled:Gt>=Wt-1,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,children:(0,G.jsx)(ms,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>ye(Wt-1),disabled:Gt>=Wt-1,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,title:`Last page`,children:(0,G.jsx)(vs,{className:`w-4 h-4`})})]})]})]})]}):(0,G.jsx)(l0e,{hasFilters:Ft,onAddSpool:()=>f({spool:null,mode:`create`}),t:n}),d!==null&&(0,G.jsx)(N1e,{isOpen:!0,onClose:()=>f(null),spool:d.spool,mode:d.mode,currencySymbol:gt,spoolmanMode:e,spoolsQueryKey:ke}),m&&(0,G.jsx)(rf,{title:m.type===`delete`?n(`common.delete`):m.type===`archive`?n(`inventory.archive`):m.type===`reset-consumed-counter`?n(`inventory.resetConsumedCounter`):n(`inventory.resetAllConsumedCounters`),message:m.type===`delete`?n(`inventory.deleteConfirm`):m.type===`archive`?n(`inventory.archiveConfirm`):m.type===`reset-consumed-counter`?n(`inventory.resetConsumedCounterConfirm`):n(`inventory.resetAllConsumedCountersConfirm`,{count:ot.length}),confirmText:m.type===`delete`?n(`common.delete`):m.type===`archive`?n(`inventory.archive`):n(`inventory.resetConsumedCounter`),variant:m.type===`archive`?`warning`:`danger`,onConfirm:()=>{m.type===`delete`?Xe.mutate(m.spoolId):m.type===`archive`?Ze.mutate(m.spoolId):m.type===`reset-consumed-counter`?$e.mutate(m.spoolId):et.mutate(ot),h(null)},onCancel:()=>h(null)}),(0,G.jsx)(lK,{isOpen:ae,onClose:()=>oe(!1),columns:re,defaultColumns:S9,onSave:It}),(0,G.jsx)(V1e,{isOpen:g!==null,onClose:()=>_(null),availableSpools:Et,initialSelectedIds:g??[],spoolmanMode:e}),(0,G.jsx)(W1e,{isOpen:fe,selectedCount:ue.size,isPending:nt.isPending,availableLocations:Fe.map(e=>({id:e.id,name:e.name})),availableMaterials:x9((je??[]).map(e=>e.material)),availableSubtypes:x9((je??[]).map(e=>e.subtype)),availableBrands:x9((je??[]).map(e=>e.brand)),availableCategories:x9((je??[]).map(e=>e.category)),availableSlicerFilaments:x9((je??[]).map(e=>e.slicer_filament)),availableSlicerFilamentNames:x9((je??[]).map(e=>e.slicer_filament_name)),onClose:()=>pe(!1),onApply:e=>nt.mutate({ids:[...ue],update:e})}),me&&(0,G.jsx)(rf,{title:n(me===`delete`?`inventory.bulk.deleteTitle`:me===`archive`?`inventory.bulk.archiveTitle`:me===`restore`?`inventory.bulk.restoreTitle`:`inventory.bulk.resetUsageTitle`),message:n(me===`delete`?`inventory.bulk.deleteMessage`:me===`archive`?`inventory.bulk.archiveMessage`:me===`restore`?`inventory.bulk.restoreMessage`:`inventory.bulk.resetUsageMessage`,{count:ue.size}),confirmText:n(me===`delete`?`common.delete`:me===`archive`?`inventory.archive`:me===`restore`?`inventory.restore`:`inventory.resetConsumedCounter`),variant:me===`delete`?`danger`:`warning`,isLoading:rt.isPending||it.isPending||at.isPending||et.isPending,onConfirm:()=>{let e=[...ue];me===`delete`?rt.mutate(e):me===`archive`?it.mutate(e):me===`restore`?at.mutate(e):et.mutate(e)},onCancel:()=>he(null)}),v&&(0,G.jsx)(H1e,{onClose:()=>b(!1),onImported:e=>{b(!1),i.invalidateQueries({queryKey:ke}),a(n(`inventory.csv.importSuccess`,`{{count}} spools imported`,{count:e}),`success`)}}),(0,G.jsx)(QUe,{open:C,onClose:()=>w(!1),onPickLocation:e=>Ot(String(e))})]})}function n0e({pageIndex:e,pageSize:t,totalRows:n,totalPages:r,onPageChange:i,onPageSizeChange:a,t:o}){let s=t===-1;if(r<=1&&!s)return null;let c=s?n||1:t;return(0,G.jsxs)(`div`,{className:`flex items-center justify-between pt-2 text-sm`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:s?`${n} ${o(n===1?`inventory.spool`:`inventory.spools`)}`:(0,G.jsxs)(G.Fragment,{children:[o(`inventory.showing`),` `,e*c+1,` `,o(`inventory.to`),` `,Math.min((e+1)*c,n),` `,o(`inventory.of`),` `,n,` `,o(`inventory.spools`)]})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:o(`inventory.show`)}),(0,G.jsxs)(`select`,{value:t,onChange:e=>a(Number(e.target.value)),className:`px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:outline-none focus:border-bambu-green`,children:[[15,30,50,100].map(e=>(0,G.jsx)(`option`,{value:e,children:e},e)),(0,G.jsx)(`option`,{value:-1,children:o(`inventory.all`)})]}),!s&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`button`,{onClick:()=>i(0),disabled:e===0,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,children:(0,G.jsx)(_s,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>i(Math.max(0,e-1)),disabled:e===0,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,children:(0,G.jsx)(hs,{className:`w-4 h-4`})}),(0,G.jsxs)(`span`,{className:`text-bambu-gray px-2 whitespace-nowrap`,children:[o(`inventory.page`),` `,e+1,` `,o(`inventory.of`),` `,r]}),(0,G.jsx)(`button`,{onClick:()=>i(Math.min(r-1,e+1)),disabled:e>=r-1,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,children:(0,G.jsx)(ms,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:()=>i(r-1),disabled:e>=r-1,className:`p-1.5 rounded text-bambu-gray hover:text-white disabled:opacity-30 disabled:cursor-not-allowed transition-colors`,children:(0,G.jsx)(vs,{className:`w-4 h-4`})})]})]})]})}function r0e({spool:e,remaining:t,pct:n,onClick:r,onPrintLabel:i,onCopy:a,t:o,colorizeLocationSensors:s,locationSensorAboveColor:c,locationSensorBelowColor:l,locationSensorOptimalColor:u}){let d=CU({rgba:e.rgba,extraColors:e.extra_colors,effectType:e.effect_type,subtype:e.subtype,effectSize:`card`});return(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg overflow-hidden border border-bambu-dark-tertiary hover:border-bambu-green transition-colors cursor-pointer ${e.archived_at?`opacity-50`:``}`,onClick:r,children:[(0,G.jsxs)(`div`,{className:`h-14 flex items-center justify-center`,style:d,children:[(0,G.jsx)(`span`,{className:`bg-white/90 text-gray-800 px-3 py-0.5 rounded-full text-sm font-medium`,children:Ef(e.color_name,e.rgba,e.color_name_is_synthesized)||`-`}),a&&(0,G.jsx)(`button`,{type:`button`,onClick:e=>{e.stopPropagation(),a()},className:`p-1.5 bg-black/20 hover:bg-black/40 text-white rounded-full transition-colors`,title:o(`inventory.copySpool`),children:(0,G.jsx)(Vs,{className:`w-3.5 h-3.5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-2`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h3`,{className:`font-semibold text-white`,children:[e.material,e.subtype?` ${e.subtype}`:``]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e.brand||`-`})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[i&&(0,G.jsx)(`button`,{onClick:e=>{e.stopPropagation(),i()},className:`p-1 text-bambu-gray hover:text-white rounded transition-colors`,title:o(`inventory.labels.printOne`),"aria-label":o(`inventory.labels.printOne`),children:(0,G.jsx)(Ll,{className:`w-4 h-4`})}),(0,G.jsxs)(`span`,{className:`text-xs font-mono text-bambu-gray bg-bambu-dark-tertiary px-2 py-1 rounded`,children:[`#`,e.id]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex justify-between text-xs text-bambu-gray mb-1`,children:[(0,G.jsx)(`span`,{children:o(`inventory.remaining`)}),(0,G.jsxs)(`span`,{children:[Math.round(n),`%`]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`div`,{className:`flex-1 h-2 bg-bambu-dark-tertiary rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full ${n>50?`bg-bambu-green`:n>20?`bg-yellow-500`:`bg-red-500`}`,style:{width:`${Math.min(n,100)}%`}})}),(0,G.jsxs)(`span`,{className:`text-xs text-bambu-gray min-w-[40px] text-right`,children:[Math.round(t),`g`]})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2 text-xs`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`span`,{className:`text-bambu-gray/60`,children:[o(`inventory.labelWeight`),`: `]}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:C9(e.label_weight)})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`span`,{className:`text-bambu-gray/60`,children:[o(`inventory.weightUsed`),`: `]}),(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:e.weight_used>0?C9(e.weight_used):`-`})]})]}),e.location_id&&(0,G.jsx)(o0e,{locationId:e.location_id,locationName:e.storage_location??null,isLast:!e.note,colorize:s,aboveColor:c,belowColor:l,optimalColor:u}),e.note&&(0,G.jsx)(`div`,{className:`text-xs text-bambu-gray/60 pt-3 border-t border-bambu-dark-tertiary truncate`,title:e.note,children:e.note})]})]})}var i0e={temperature:0,humidity:1,battery:2};function a0e(e){return e===`humidity`?`mr-[2px]`:e===`battery`?`mr-[3px]`:``}function O9(e,t){return BT(e,t,{decimals:2})}function k9(e,t,n,r,i){return t&&DUe(EUe(e),n,r,i)||`text-bambu-gray`}function o0e({locationId:e,locationName:t,isLast:n,colorize:r,aboveColor:i,belowColor:a,optimalColor:o}){let{t:s}=U(),{data:c}=K({queryKey:[`settings`],queryFn:Z.getSettings}),l=(c?.location_sensor_poll_interval||120)*1e3,{data:u}=K({queryKey:[`locationHaSensors`],queryFn:()=>Z.getLocationHASensors()}),d=(u??[]).some(t=>t.location_id===e),{data:f}=K({queryKey:[`locationHaSensorReadings`,e],queryFn:()=>Z.getLocationHASensorReadings(e,!1),refetchInterval:l,enabled:d}),p=f?.filter(e=>e.show_on_card);if(!p?.length)return null;let m=p.find(e=>e.device_class===`battery`),h=p.filter(e=>e.device_class!==`battery`).sort((e,t)=>(i0e[e.device_class??``]??99)-(i0e[t.device_class??``]??99));return(0,G.jsxs)(`div`,{className:`flex items-center gap-2 pt-3 border-t border-bambu-dark-tertiary text-xs text-bambu-gray ${n?`-mb-1`:``}`,children:[t&&(0,G.jsx)(`span`,{className:`truncate`,children:t}),(0,G.jsx)(`span`,{className:`text-bambu-gray/40`,children:`|`}),(0,G.jsx)(`div`,{className:`flex items-center gap-3`,children:h.map((e,t)=>{let n=VT(e),c=t===0?`ml-[-3.6px]`:``;return(0,G.jsxs)(`span`,{title:e.name,className:`flex items-center gap-[3px]`,children:[(0,G.jsx)(n,{className:`w-3 h-3 ${a0e(e.device_class)} ${c}`}),(0,G.jsx)(`span`,{className:k9(e,r,i,a,o),children:O9(e,s)})]},e.id)})}),m&&(()=>{let e=VT(m);return(0,G.jsxs)(`span`,{title:m.name,className:`flex items-center gap-[3px] ml-auto`,children:[(0,G.jsx)(e,{className:`w-3 h-3 ${a0e(m.device_class)}`}),(0,G.jsx)(`span`,{className:k9(m,r,i,a,o),children:O9(m,s)})]},m.id)})()]})}function s0e({spool:e,remaining:t,pct:n,isSelected:r,onToggleSelected:i,onEdit:a,onCopy:o,onRestore:s,onArchive:c,onDelete:l,onPrintLabel:u,onResetConsumedCounter:d,visibleColumns:f,assignmentMap:p,catalogMap:m,locationReadingsMap:h,currencySymbol:g,dateFormat:_,t:v,onSyncWeight:y,colorizeLocationSensors:b,locationSensorAboveColor:x,locationSensorBelowColor:S,locationSensorOptimalColor:C}){return(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/50 hover:bg-bambu-dark-tertiary/30 transition-colors cursor-pointer ${e.archived_at?`opacity-50`:``} ${r?`bg-bambu-green/10`:``}`,onClick:a,children:[(0,G.jsx)(`td`,{className:`w-10 px-3 py-3`,onClick:e=>e.stopPropagation(),children:i&&(0,G.jsx)(`input`,{type:`checkbox`,className:`h-4 w-4 cursor-pointer`,"aria-label":v(`inventory.bulk.selectRow`),checked:!!r,onChange:i})}),f.map(r=>(0,G.jsx)(`td`,{className:`py-3 px-4`,children:T9[r]?.({spool:e,remaining:t,pct:n,assignmentMap:p,catalogMap:m,locationReadingsMap:h,currencySymbol:g,dateFormat:_,t:v,onSyncWeight:y,colorizeLocationSensors:b,locationSensorAboveColor:x,locationSensorBelowColor:S,locationSensorOptimalColor:C})},r)),(0,G.jsx)(`td`,{className:`py-3 px-4`,children:(0,G.jsxs)(`div`,{className:`flex items-center justify-end gap-1`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(`button`,{onClick:a,className:`p-1.5 text-bambu-gray hover:text-white rounded transition-colors`,title:v(`common.edit`),children:(0,G.jsx)(Ol,{className:`w-4 h-4`})}),o&&(0,G.jsx)(`button`,{onClick:o,className:`p-1.5 text-bambu-gray hover:text-bambu-green rounded transition-colors`,title:v(`inventory.copySpool`),children:(0,G.jsx)(Vs,{className:`w-4 h-4`})}),u&&(0,G.jsx)(`button`,{onClick:u,className:`p-1.5 text-bambu-gray hover:text-white rounded transition-colors`,title:v(`inventory.labels.printOne`),children:(0,G.jsx)(Ll,{className:`w-4 h-4`})}),d&&e.weight_used>0&&(0,G.jsx)(`button`,{onClick:d,className:`p-1.5 text-bambu-gray hover:text-orange-600 dark:hover:text-orange-400 rounded transition-colors`,title:v(`inventory.resetConsumedCounterTooltip`),children:(0,G.jsx)(tc,{className:`w-4 h-4`})}),e.archived_at?(0,G.jsx)(`button`,{onClick:s,className:`p-1.5 text-bambu-gray hover:text-bambu-green rounded transition-colors`,title:v(`inventory.restore`),children:(0,G.jsx)(Ul,{className:`w-4 h-4`})}):(0,G.jsx)(`button`,{onClick:c,className:`p-1.5 text-bambu-gray hover:text-yellow-600 dark:hover:text-yellow-400 rounded transition-colors`,title:v(`inventory.archive`),children:(0,G.jsx)(Po,{className:`w-4 h-4`})}),(0,G.jsx)(`button`,{onClick:l,className:`p-1.5 text-bambu-gray hover:text-red-600 dark:hover:text-red-400 rounded transition-colors`,title:v(`common.delete`),children:(0,G.jsx)(Nu,{className:`w-4 h-4`})})]})})]})}function c0e({spools:e,headerSpool:t,remaining:n,pct:r,isExpanded:i,onToggle:a,onEdit:o,onCopy:s,onArchive:c,onDelete:l,onPrintLabel:u,onResetConsumedCounter:d,visibleColumns:f,assignmentMap:p,catalogMap:m,locationReadingsMap:h,currencySymbol:g,dateFormat:_,t:v,onSyncWeight:y,colorizeLocationSensors:b,locationSensorAboveColor:x,locationSensorBelowColor:S,locationSensorOptimalColor:C,selectedIds:w,onToggleSelected:T,onToggleGroupSelected:E}){let D=!!w&&e.every(e=>w.has(e.id));return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`tr`,{className:`border-b border-bambu-dark-tertiary/50 hover:bg-bambu-dark-tertiary/30 transition-colors cursor-pointer bg-bambu-green/5`,onClick:a,children:[(0,G.jsx)(`td`,{className:`w-10 px-3 py-3`,onClick:e=>e.stopPropagation(),children:E&&(0,G.jsx)(`input`,{type:`checkbox`,className:`h-4 w-4 cursor-pointer`,"aria-label":v(`inventory.bulk.selectGroup`),checked:D,onChange:t=>E(e.map(e=>e.id),t.target.checked)})}),f.map((a,o)=>(0,G.jsx)(`td`,{className:`py-3 px-4`,children:o===0?(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray transition-transform ${i?``:`-rotate-90`}`}),T9[a]?.({spool:t,remaining:n,pct:r,assignmentMap:p,catalogMap:m,locationReadingsMap:h,currencySymbol:g,dateFormat:_,t:v,onSyncWeight:y,colorizeLocationSensors:b,locationSensorAboveColor:x,locationSensorBelowColor:S,locationSensorOptimalColor:C})]}):a===`id`?(0,G.jsx)(`span`,{className:`text-xs font-medium bg-bambu-green/20 text-bambu-green px-2 py-0.5 rounded-full`,children:v(`inventory.groupedSpools`,{count:e.length})}):T9[a]?.({spool:t,remaining:n,pct:r,assignmentMap:p,catalogMap:m,locationReadingsMap:h,currencySymbol:g,dateFormat:_,t:v,onSyncWeight:y,colorizeLocationSensors:b,locationSensorAboveColor:x,locationSensorBelowColor:S,locationSensorOptimalColor:C})},a)),(0,G.jsx)(`td`,{className:`py-3 px-4`,children:(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:e.map(e=>`#${e.id}`).join(`, `)})})]}),i&&e.map(e=>{let t=Math.max(0,e.label_weight-e.weight_used);return(0,G.jsx)(s0e,{spool:e,remaining:t,pct:e.label_weight>0?t/e.label_weight*100:0,isSelected:w?.has(e.id),onToggleSelected:T?()=>T(e.id):void 0,onEdit:()=>o(e),onCopy:s?()=>s(e):void 0,onRestore:()=>{},onArchive:()=>c(e.id),onDelete:()=>l(e.id),onPrintLabel:u?()=>u(e.id):void 0,onResetConsumedCounter:d?()=>d(e.id):void 0,visibleColumns:f,assignmentMap:p,catalogMap:m,locationReadingsMap:h,currencySymbol:g,dateFormat:_,t:v,onSyncWeight:y,colorizeLocationSensors:b,locationSensorAboveColor:x,locationSensorBelowColor:S,locationSensorOptimalColor:C},e.id)})]})}function l0e({hasFilters:e,onAddSpool:t,t:n}){return(0,G.jsxs)(`div`,{className:`flex flex-col items-center justify-center py-16 px-4`,children:[(0,G.jsxs)(`div`,{className:`relative mb-6`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 -m-4 bg-bambu-green/5 rounded-full blur-2xl`}),(0,G.jsxs)(`div`,{className:`relative flex items-center justify-center w-24 h-24 rounded-2xl bg-gradient-to-br from-bambu-dark-secondary to-bambu-dark-tertiary border border-bambu-dark-tertiary shadow-lg`,children:[(0,G.jsx)(`div`,{className:`absolute -top-1 -right-1 w-3 h-3 rounded-full bg-bambu-green/30`}),(0,G.jsx)(`div`,{className:`absolute -bottom-2 -left-2 w-2 h-2 rounded-full bg-bambu-green/20`}),e?(0,G.jsx)(Zl,{className:`w-10 h-10 text-bambu-gray/40`,strokeWidth:1.5}):(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`div`,{className:`w-14 h-14 rounded-full border-4 border-bambu-gray/20 flex items-center justify-center`,children:(0,G.jsx)(`div`,{className:`w-6 h-6 rounded-full bg-bambu-gray/10 border-2 border-bambu-gray/20`})}),(0,G.jsx)(`div`,{className:`absolute -bottom-1 -right-1 w-6 h-6 rounded-full bg-bambu-green flex items-center justify-center shadow-md`,children:(0,G.jsx)(`span`,{className:`text-white text-lg font-bold leading-none`,children:`+`})})]})]})]}),(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-white mb-2 text-center`,children:e?n(`inventory.noSpoolsMatch`):n(`inventory.noSpools`).split(`.`)[0]}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray text-center max-w-sm mb-6`,children:n(e?`inventory.noSpoolsMatchDesc`:`inventory.noSpools`)}),!e&&(0,G.jsxs)(Q,{onClick:t,children:[(0,G.jsx)(Sl,{className:`w-4 h-4`}),n(`inventory.addSpool`)]})]})}function A9(e,t){let n=e?.[t];return typeof n==`string`?n:``}function u0e(e){return e.replace(/(https?:\/\/(?:makerworld|public-cdn)\.bblmw\.com\/[^\s"']+)/gi,e=>`/api/v1/makerworld/thumbnail?url=${encodeURIComponent(e)}`)}function j9(e){return e?/^https?:\/\/(makerworld|public-cdn)\.bblmw\.com\//i.test(e)?`/api/v1/makerworld/thumbnail?url=${encodeURIComponent(e)}`:e:``}function M9(e,t){let n=e?.[t];return typeof n==`number`?n:null}function d0e(e,t){let n=e?.[t];return n&&typeof n==`object`&&!Array.isArray(n)?n:void 0}function f0e(e,t=0,n=[]){n.push({folder:e,depth:t});for(let r of e.children??[])f0e(r,t+1,n);return n}function p0e(e,t){return t(e<1?`makerworld.phaseResolving`:`makerworld.phaseDownloading`)}function m0e(e){let[t,n]=(0,y.useState)(0);return(0,y.useEffect)(()=>{if(!e){n(0);return}let t=Date.now(),r=()=>n(Math.floor((Date.now()-t)/1e3));r();let i=window.setInterval(r,1e3);return()=>window.clearInterval(i)},[e]),t}function h0e(){let{t:e}=U(),{hasPermission:t}=jd(),{showToast:n}=Gd(),r=co(),i=t(`makerworld:import`),[a,o]=(0,y.useState)(``),[s,c]=(0,y.useState)(null),[l,u]=(0,y.useState)(null),[d,f]=(0,y.useState)(null),[p,m]=(0,y.useState)(null),[h,g]=(0,y.useState)(null),[_,v]=(0,y.useState)(``),[b,x]=(0,y.useState)({}),S=K({queryKey:[`makerworld-status`],queryFn:()=>Z.getMakerworldStatus()}),C=K({queryKey:[`library-folders`],queryFn:()=>Z.getLibraryFolders()}),w=K({queryKey:[`makerworld-recent-imports`],queryFn:()=>Z.getMakerworldRecentImports(10)}),T=K({queryKey:[`settings`],queryFn:()=>Z.getSettings()}),E=T.data?.use_slicer_api??!1,D=T.data?.preferred_slicer||`bambu_studio`,O=XG(T.data?.open_in_slicer,T.data?.preferred_slicer),k=E?D:O,A=k===`orcaslicer`?`OrcaSlicer`:`Bambu Studio`,[j,M]=(0,y.useState)(null),N=(e,t)=>{M({kind:`libraryFile`,id:e,filename:t})},P=q({mutationFn:e=>Z.resolveMakerworldUrl(e),onSuccess:(e,t)=>{c(e),v(t),x({})},onError:t=>n(t.message||e(`makerworld.errors.resolveFailed`),`error`)});(0,y.useEffect)(()=>{s!==null&&a.trim()!==_.trim()&&(c(null),v(``),x({}))},[a,s,_]);let F=q({mutationFn:({instanceId:e,profileId:t})=>Z.importMakerworldInstance(s?.model_id??0,e,t,l),onSuccess:t=>{r.invalidateQueries({queryKey:[`library-files`]}),r.invalidateQueries({queryKey:[`library-folders`]}),t.profile_id&&x(e=>({...e,[t.profile_id]:t})),n(t.was_existing?e(`makerworld.alreadyInLibrary`):e(`makerworld.importSuccess`,{filename:t.filename}),`success`)},onError:t=>n(t.message||e(`makerworld.errors.downloadFailed`),`error`)}),I=q({mutationFn:({libraryFileId:e})=>Z.deleteLibraryFile(e),onSuccess:(t,{profileId:i})=>{r.invalidateQueries({queryKey:[`library-files`]}),r.invalidateQueries({queryKey:[`library-folders`]}),r.invalidateQueries({queryKey:[`makerworld-recent-imports`]}),x(e=>{let t={...e};return delete t[i],t}),m(null),n(e(`makerworld.importDeleted`),`success`)},onError:t=>{m(null),n(t.message||e(`makerworld.errors.deleteFailed`),`error`)}}),L=q({mutationFn:({instanceId:e,profileId:t})=>Z.importMakerworldInstance(s?.model_id??0,e,t,l),onSuccess:async e=>{r.invalidateQueries({queryKey:[`library-files`]}),r.invalidateQueries({queryKey:[`library-folders`]}),r.invalidateQueries({queryKey:[`makerworld-recent-imports`]}),e.profile_id&&x(t=>({...t,[e.profile_id]:e})),E?N(e.library_file_id,e.filename):await te(e.library_file_id,e.filename,k)},onError:t=>n(t.message||e(`makerworld.errors.downloadFailed`),`error`)}),R=m0e(F.isPending||L.isPending),z=p0e(R,e),B=e=>{e?.preventDefault();let t=a.trim();t&&P.mutate(t)};(0,y.useEffect)(()=>{if(!h)return;let e=e=>{e.key===`Escape`?g(null):e.key===`ArrowLeft`?g(e=>e&&e.index>0?{...e,index:e.index-1}:e):e.key===`ArrowRight`&&g(e=>e&&e.index<e.images.length-1?{...e,index:e.index+1}:e)};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[h]);let V=e=>{let t=(Array.isArray(e.pictures)?e.pictures:[]).filter(e=>typeof e==`object`&&!!e).map(e=>({name:A9(e,`name`)||`image`,url:A9(e,`url`)})).filter(e=>e.url);if(t.length>0)return t;let n=A9(e,`cover`);return n?[{name:`cover`,url:n}]:[]},ee=async()=>{if(!s)return;let e=s.instances.filter(e=>{let t=M9(e,`profileId`);return t!==null&&!b[t]});if(e.length!==0){f({current:0,total:e.length});try{for(let t=0;t<e.length;t+=1){let n=e[t],r=M9(n,`id`),i=M9(n,`profileId`);if(!(r===null||i===null)){f({current:t+1,total:e.length});try{await F.mutateAsync({instanceId:r,profileId:i})}catch{}}}}finally{f(null)}}},te=async(e,t,n)=>{try{let{token:r}=await Z.createLibrarySlicerToken(e),i=Z.getLibrarySlicerDownloadUrl(e,r,t);eK(`${window.location.origin}${i}`,n)}catch{let t=Z.getLibraryFileDownloadUrl(e);eK(`${window.location.origin}${t}`,n)}},ne=s?.design,re=d0e(ne,`designCreator`),ie=s?.instances??[],ae=(s?.already_imported_library_ids.length??0)>0,oe=S.data?.can_download??!1,se=S.data?.sign_in_expired??!1,H=(0,y.useMemo)(()=>A9(ne,`coverUrl`),[ne]),ce=A9(ne,`title`),le=A9(ne,`summary`),ue=A9(ne,`license`),de=M9(ne,`downloadCount`);return(0,G.jsxs)(`div`,{className:`p-4 md:p-8 max-w-screen-2xl space-y-6`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`h1`,{className:`text-2xl font-bold text-white flex items-center gap-3`,children:[(0,G.jsx)(kc,{className:`w-7 h-7 text-bambu-green`}),e(`makerworld.title`)]}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:e(`makerworld.description`)})]}),(0,G.jsxs)(`div`,{className:`grid gap-6 lg:grid-cols-[1fr_20rem]`,children:[(0,G.jsxs)(`div`,{className:`space-y-6 min-w-0`,children:[!oe&&(0,G.jsx)(Ld,{className:`border-amber-300 dark:border-amber-700 bg-amber-50 dark:bg-amber-900/20`,children:(0,G.jsx)(zd,{children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3 py-2`,children:[(0,G.jsx)(ys,{className:`w-5 h-5 text-amber-600 dark:text-amber-400 mt-0.5 shrink-0`}),(0,G.jsxs)(`div`,{className:`text-sm`,children:[(0,G.jsx)(`p`,{className:`font-medium text-amber-900 dark:text-amber-100`,children:e(se?`makerworld.signInExpiredTitle`:`makerworld.signInRequiredTitle`)}),(0,G.jsxs)(`p`,{className:`text-amber-800 dark:text-amber-200 mt-1`,children:[e(se?`makerworld.signInExpiredBody`:`makerworld.signInRequiredBody`),` `,(0,G.jsx)(Ai,{to:`/profiles`,className:`underline`,children:e(`makerworld.openCloudSettings`)})]})]})]})})}),(0,G.jsxs)(Ld,{children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-lg font-semibold`,children:e(`makerworld.pasteUrlHeader`)})}),(0,G.jsx)(zd,{children:(0,G.jsxs)(`form`,{onSubmit:B,className:`flex gap-2`,children:[(0,G.jsx)(`input`,{type:`text`,value:a,onChange:e=>o(e.target.value),placeholder:e(`makerworld.pasteUrlPlaceholder`),className:`flex-1 min-w-0 px-3 py-2 border rounded bg-white dark:bg-gray-800 border-gray-300 dark:border-gray-700`,autoComplete:`off`}),(0,G.jsxs)(Q,{type:`submit`,variant:`primary`,disabled:!a.trim()||P.isPending,children:[P.isPending?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}):(0,G.jsx)(zo,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`ml-2`,children:e(`makerworld.resolveButton`)})]})]})})]}),s&&(0,G.jsx)(Ld,{children:(0,G.jsx)(zd,{children:(0,G.jsxs)(`div`,{className:`flex gap-4 py-2`,children:[H&&(0,G.jsx)(`img`,{src:j9(H),alt:ce,className:`w-32 h-32 object-cover rounded`,loading:`lazy`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`h3`,{className:`text-xl font-semibold truncate`,children:ce||e(`makerworld.untitledModel`)}),re&&(0,G.jsx)(`p`,{className:`text-sm text-gray-600 dark:text-gray-400 mt-1`,children:e(`makerworld.byCreator`,{name:A9(re,`name`)})}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-3 mt-2 text-xs text-gray-500 dark:text-gray-400`,children:[de!==null&&(0,G.jsx)(`span`,{children:e(`makerworld.downloadsCount`,{count:de})}),ue&&(0,G.jsxs)(`span`,{children:[e(`makerworld.licensePrefix`),`: `,ue]}),ae&&(0,G.jsxs)(`span`,{className:`inline-flex items-center gap-1 text-emerald-600 dark:text-emerald-400`,children:[(0,G.jsx)(fs,{className:`w-3 h-3`}),` `,e(`makerworld.alreadyImported`)]})]}),le&&(0,G.jsx)(`div`,{className:`mt-3 text-sm prose prose-sm max-w-none dark:prose-invert line-clamp-3`,dangerouslySetInnerHTML:{__html:nq.sanitize(u0e(le))}}),s&&(0,G.jsxs)(`a`,{href:`https://makerworld.com/models/${s.model_id}${s.profile_id?`#profileId-${s.profile_id}`:``}`,target:`_blank`,rel:`noopener noreferrer`,className:`mt-3 inline-flex items-center gap-1 text-xs text-brand-500 hover:underline`,children:[(0,G.jsx)(nc,{className:`w-3 h-3`}),` `,e(`makerworld.openOnMakerworld`)]})]})]})})}),s&&ie.length>0&&(0,G.jsxs)(Ld,{children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center justify-between gap-3`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold`,children:e(`makerworld.platesHeader`,{count:ie.length})}),(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-2`,children:[(0,G.jsx)(`label`,{className:`text-xs text-gray-600 dark:text-gray-400`,children:e(`makerworld.importTo`)}),(0,G.jsxs)(`select`,{value:l??``,onChange:e=>u(e.target.value?Number(e.target.value):null),className:`text-sm px-2 py-1 border rounded bg-white dark:bg-gray-800 border-gray-300 dark:border-gray-700`,disabled:d!==null,children:[(0,G.jsx)(`option`,{value:``,children:e(`makerworld.folderAuto`)}),(C.data??[]).filter(e=>!(e.is_external&&e.external_readonly)).flatMap(e=>f0e(e)).map(({folder:e,depth:t})=>(0,G.jsx)(`option`,{value:e.id,children:`${`— `.repeat(t)}${e.name}`},e.id))]}),(0,G.jsx)(Q,{variant:`primary`,size:`sm`,disabled:!i||!oe||d!==null||F.isPending||L.isPending,onClick:ee,children:d===null?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`ml-2`,children:e(`makerworld.importAll`)})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),(0,G.jsxs)(`span`,{className:`ml-2`,children:[e(`makerworld.importAllProgress`,{current:d.current,total:d.total}),R>0&&` · ${z} · ${R}s`]})]})})]})]})}),(0,G.jsx)(zd,{children:(0,G.jsx)(`div`,{className:`grid gap-3`,children:ie.map((t,n)=>{let r=M9(t,`id`),a=M9(t,`profileId`),o=A9(t,`title`),s=A9(t,`cover`),c=M9(t,`materialCnt`),l=t?.needAms===!0,u=M9(t,`downloadCount`),f=t?.compatibility??null,p=t?.otherCompatibility??null,h=f?.devProductName??null,_=Array.isArray(p)?p.map(e=>e?.devProductName??``).filter(Boolean):[];if(r==null)return null;let v=F.isPending&&F.variables?.instanceId===r,y=L.isPending&&L.variables?.instanceId===r,x=a===null?void 0:b[a];return(0,G.jsxs)(`div`,{className:`flex flex-col gap-2 p-3 border rounded border-gray-200 dark:border-gray-700`,children:[(0,G.jsxs)(`div`,{className:`flex gap-3 items-center`,children:[(()=>{let n=V(t),r=n.length>0;return(0,G.jsxs)(`button`,{type:`button`,disabled:!r,onClick:()=>r&&g({images:n,index:0}),className:`relative w-16 h-16 shrink-0 rounded overflow-hidden group`,"aria-label":e(`makerworld.openGallery`),children:[s?(0,G.jsx)(`img`,{src:j9(s),alt:``,className:`w-16 h-16 object-cover`,loading:`lazy`}):(0,G.jsx)(`div`,{className:`w-16 h-16 bg-gray-100 dark:bg-gray-800`}),n.length>1&&(0,G.jsxs)(`span`,{className:`absolute bottom-0.5 right-0.5 bg-black/70 text-white text-[10px] px-1.5 py-0.5 rounded flex items-center gap-1`,children:[(0,G.jsx)(Hc,{className:`w-2.5 h-2.5`}),n.length]})]})})(),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`font-medium truncate`,children:o||e(`makerworld.plateDefaultName`,{n:n+1})}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-3 text-xs text-gray-500 dark:text-gray-400 mt-1`,children:[h&&(0,G.jsx)(`span`,{className:`font-medium text-gray-700 dark:text-gray-300`,children:e(`makerworld.slicedFor`,{printer:h,defaultValue:`Sliced for {{printer}}`})}),c!==null&&(0,G.jsx)(`span`,{children:e(`makerworld.materialCount`,{count:c})}),l&&(0,G.jsx)(`span`,{children:e(`makerworld.amsRequired`)}),u!==null&&(0,G.jsx)(`span`,{children:e(`makerworld.downloadsCount`,{count:u})})]}),_.length>0&&(0,G.jsx)(`p`,{className:`text-xs text-gray-500 dark:text-gray-400 mt-1`,title:_.join(`, `),children:e(`makerworld.alsoCompatible`,{printers:_.slice(0,6).join(`, `)+(_.length>6?`…`:``),defaultValue:`Also marked compatible: {{printers}}`})})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 shrink-0`,children:[(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,disabled:!i||!oe||v||y||d!==null,onClick:()=>F.mutate({instanceId:r,profileId:a}),title:oe?void 0:e(`makerworld.signInRequiredTitle`),children:v?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),(0,G.jsxs)(`span`,{className:`ml-2`,children:[z,R>0&&` · ${R}s`]})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ys,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`ml-2`,children:e(`makerworld.importToLibrary`)})]})}),(0,G.jsx)(Q,{variant:`primary`,size:`sm`,disabled:!i||!oe||v||y||d!==null,onClick:()=>L.mutate({instanceId:r,profileId:a}),title:oe?void 0:e(`makerworld.signInRequiredTitle`),children:y?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),(0,G.jsxs)(`span`,{className:`ml-2`,children:[z,R>0&&` · ${R}s`]})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(nc,{className:`w-4 h-4`}),(0,G.jsx)(`span`,{className:`ml-2`,children:e(`makerworld.sliceIn`,{slicer:A})})]})})]})]}),x&&(0,G.jsxs)(`div`,{className:`flex items-center gap-2 pl-20 text-xs`,children:[(0,G.jsx)(fs,{className:`w-3.5 h-3.5 text-emerald-600 dark:text-emerald-400 shrink-0`}),(0,G.jsx)(`span`,{className:`text-emerald-700 dark:text-emerald-300`,children:x.was_existing?e(`makerworld.lastImportAlreadyInLibrary`):e(`makerworld.lastImportSuccess`)}),(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:()=>{let e=x.folder_id?`/files?folder=${x.folder_id}`:`/files`;window.location.assign(e)},children:[(0,G.jsx)(_c,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`span`,{className:`ml-1.5`,children:e(`makerworld.viewInLibrary`)})]}),E?(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:()=>N(x.library_file_id,x.filename),children:[(0,G.jsx)(Rs,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`span`,{className:`ml-1.5`,children:e(`slice.action`,`Slice`)})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:()=>te(x.library_file_id,x.filename,`bambu_studio`),children:[(0,G.jsx)(nc,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`span`,{className:`ml-1.5`,children:e(`makerworld.openInBambuStudio`)})]}),(0,G.jsxs)(Q,{variant:`ghost`,size:`sm`,onClick:()=>te(x.library_file_id,x.filename,`orcaslicer`),children:[(0,G.jsx)(nc,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`span`,{className:`ml-1.5`,children:e(`makerworld.openInOrcaSlicer`)})]})]}),(0,G.jsx)(`div`,{className:`ml-auto`,children:(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,disabled:I.isPending&&I.variables?.profileId===a,onClick:()=>{a!==null&&m({libraryFileId:x.library_file_id,profileId:a,filename:x.filename})},title:e(`makerworld.deleteImport`),children:I.isPending&&I.variables?.profileId===a?(0,G.jsx)(Y,{className:`w-3.5 h-3.5 animate-spin`}):(0,G.jsx)(Nu,{className:`w-3.5 h-3.5 text-red-500`})})})]})]},r)})})})]})]}),(0,G.jsx)(`aside`,{className:`lg:sticky lg:top-6 lg:self-start min-w-0`,children:w.data&&w.data.length>0&&(0,G.jsxs)(Ld,{children:[(0,G.jsx)(Rd,{children:(0,G.jsx)(`h2`,{className:`text-base font-semibold`,children:e(`makerworld.recentImportsHeader`)})}),(0,G.jsx)(zd,{children:(0,G.jsx)(`div`,{className:`flex flex-col gap-2 max-h-[28rem] overflow-y-auto -mx-2 px-2`,children:w.data.map(t=>(0,G.jsxs)(`div`,{className:`flex gap-2 p-2 border rounded border-gray-200 dark:border-gray-700`,children:[t.thumbnail_path?(0,G.jsx)(`img`,{src:Z.getLibraryFileThumbnailUrl(t.library_file_id),alt:``,className:`w-12 h-12 shrink-0 object-cover rounded bg-gray-100 dark:bg-gray-800`,loading:`lazy`}):(0,G.jsx)(`div`,{className:`w-12 h-12 shrink-0 rounded bg-gray-100 dark:bg-gray-800`}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0 flex flex-col gap-1`,children:[(0,G.jsx)(`p`,{className:`text-xs font-medium truncate`,title:t.filename,children:t.filename}),(0,G.jsxs)(`div`,{className:`flex gap-0.5`,children:[(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>{let e=t.folder_id?`/files?folder=${t.folder_id}`:`/files`;window.location.assign(e)},title:e(`makerworld.viewInLibrary`),children:(0,G.jsx)(_c,{className:`w-3.5 h-3.5`})}),E?(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>N(t.library_file_id,t.filename),title:e(`slice.action`,`Slice`),children:(0,G.jsx)(Rs,{className:`w-3.5 h-3.5`})}):(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>te(t.library_file_id,t.filename,`bambu_studio`),title:e(`makerworld.openInBambuStudio`),children:(0,G.jsx)(nc,{className:`w-3.5 h-3.5`})}),t.source_url&&(0,G.jsx)(`a`,{href:t.source_url,target:`_blank`,rel:`noopener noreferrer`,className:`inline-flex items-center justify-center h-7 w-7 rounded text-gray-500 hover:text-gray-700 dark:hover:text-gray-300`,title:e(`makerworld.openOnMakerworld`),children:(0,G.jsx)(kc,{className:`w-3.5 h-3.5`})})]})]})]},t.library_file_id))})})]})})]}),(0,G.jsx)(`p`,{className:`text-xs text-gray-500 dark:text-gray-400 pt-4 border-t border-gray-200 dark:border-gray-700`,children:e(`makerworld.disclaimer`)}),p&&(0,G.jsx)(rf,{title:e(`makerworld.deleteImport`),message:e(`makerworld.confirmDelete`,{filename:p.filename}),confirmText:e(`makerworld.deleteImport`),variant:`danger`,isLoading:I.isPending,loadingText:e(`makerworld.importDeleting`),onCancel:()=>m(null),onConfirm:()=>I.mutate({libraryFileId:p.libraryFileId,profileId:p.profileId})}),j&&(0,G.jsx)(KG,{source:j,onClose:()=>M(null)}),h&&(0,G.jsxs)(`div`,{className:`fixed inset-0 bg-black/90 flex items-center justify-center z-50`,onClick:()=>g(null),role:`dialog`,"aria-modal":`true`,children:[(0,G.jsx)(`button`,{type:`button`,className:`absolute top-4 right-4 p-2 bg-white/10 hover:bg-white/20 rounded-full text-white`,onClick:e=>{e.stopPropagation(),g(null)},"aria-label":e(`common.close`,`Close`),children:(0,G.jsx)(td,{className:`w-5 h-5`})}),h.images.length>1&&(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`button`,{type:`button`,className:`absolute left-4 p-2 bg-white/10 hover:bg-white/20 rounded-full text-white disabled:opacity-30`,disabled:h.index===0,onClick:e=>{e.stopPropagation(),g(e=>e&&{...e,index:Math.max(0,e.index-1)})},"aria-label":e(`makerworld.galleryPrev`),children:(0,G.jsx)(hs,{className:`w-6 h-6`})}),(0,G.jsx)(`button`,{type:`button`,className:`absolute right-4 p-2 bg-white/10 hover:bg-white/20 rounded-full text-white disabled:opacity-30`,disabled:h.index>=h.images.length-1,onClick:e=>{e.stopPropagation(),g(e=>e&&{...e,index:Math.min(e.images.length-1,e.index+1)})},"aria-label":e(`makerworld.galleryNext`),children:(0,G.jsx)(ms,{className:`w-6 h-6`})})]}),(0,G.jsx)(`img`,{src:j9(h.images[h.index].url),alt:h.images[h.index].name,className:`max-w-[90vw] max-h-[90vh] object-contain`,onClick:e=>e.stopPropagation()}),h.images.length>1&&(0,G.jsxs)(`div`,{className:`absolute bottom-6 left-1/2 -translate-x-1/2 text-white bg-black/60 px-3 py-1 rounded text-xs`,children:[h.index+1,` / `,h.images.length]})]})]})}var g0e=[`DEBUG`,`INFO`,`WARNING`,`ERROR`],N9={DEBUG:`text-gray-400`,INFO:`text-blue-400`,WARNING:`text-yellow-400`,ERROR:`text-red-400`},_0e={DEBUG:$o,INFO:Uc,WARNING:Iu,ERROR:ys};function v0e(){let e=co(),[t,n]=(0,y.useState)(!0),[r,i]=(0,y.useState)(new Set),[a,o]=(0,y.useState)(``),[s,c]=(0,y.useState)(`ALL`),[l,u]=(0,y.useState)(!1),[d,f]=(0,y.useState)(!1),p=(0,y.useRef)(null),{data:m,isLoading:h,refetch:g}=K({queryKey:[`application-logs`,s,a],queryFn:()=>Ed.getLogs({limit:200,level:s===`ALL`?void 0:s,search:a||void 0}),refetchInterval:d?2e3:!1,enabled:l});(0,y.useEffect)(()=>{l||f(!1)},[l]);let _=q({mutationFn:()=>Ed.clearLogs(),onSuccess:()=>{e.invalidateQueries({queryKey:[`application-logs`]})}});(0,y.useEffect)(()=>{t&&p.current&&m?.entries&&(p.current.scrollTop=p.current.scrollHeight)},[m?.entries,t]);let v=e=>{i(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},b=e=>{let t=e.split(` `);return t.length>=2?t[1]:e},x=(0,y.useMemo)(()=>m?.entries??[],[m?.entries]),S=(0,y.useMemo)(()=>[...x].reverse(),[x]),C=({level:e})=>(0,G.jsx)(_0e[e]||Uc,{className:`w-3.5 h-3.5 ${N9[e]||`text-gray-400`}`});return(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg overflow-hidden`,children:[(0,G.jsxs)(`button`,{onClick:()=>u(!l),className:`w-full flex items-center justify-between p-4 hover:bg-bambu-dark-tertiary/50 transition-colors`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg ${d?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:(0,G.jsx)($o,{className:`w-5 h-5`})}),(0,G.jsxs)(`div`,{className:`text-left`,children:[(0,G.jsx)(`p`,{className:`font-medium text-white`,children:`Application Logs`}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:d?`Live streaming - ${m?.filtered_count??0} entries`:`View and filter application logs`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[d&&(0,G.jsxs)(`span`,{className:`flex items-center gap-1.5 px-2 py-1 bg-bambu-green/20 rounded text-bambu-green text-xs`,children:[(0,G.jsx)(`span`,{className:`w-1.5 h-1.5 bg-bambu-green rounded-full animate-pulse`}),`Live`]}),l?(0,G.jsx)(gs,{className:`w-5 h-5 text-bambu-gray`}):(0,G.jsx)(ps,{className:`w-5 h-5 text-bambu-gray`})]})]}),l&&(0,G.jsxs)(`div`,{className:`border-t border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex flex-col gap-2 p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 flex-wrap`,children:[d?(0,G.jsxs)(`button`,{onClick:e=>{e.stopPropagation(),f(!1)},className:`flex items-center gap-1.5 px-3 py-1.5 text-sm bg-red-100 dark:bg-red-500/20 text-red-700 dark:text-red-400 hover:bg-red-200 dark:hover:bg-red-500/30 rounded transition-colors`,children:[(0,G.jsx)(yu,{className:`w-4 h-4`}),`Stop`]}):(0,G.jsxs)(`button`,{onClick:e=>{e.stopPropagation(),f(!0),g()},className:`flex items-center gap-1.5 px-3 py-1.5 text-sm bg-bambu-green/20 text-bambu-green hover:bg-bambu-green/30 rounded transition-colors`,children:[(0,G.jsx)(Ml,{className:`w-4 h-4`}),`Start`]}),(0,G.jsxs)(`button`,{onClick:()=>_.mutate(),disabled:_.isPending||x.length===0,className:`flex items-center gap-1.5 px-3 py-1.5 text-sm bg-bambu-dark-tertiary text-bambu-gray hover:text-white hover:bg-bambu-dark-secondary rounded transition-colors disabled:opacity-50`,children:[(0,G.jsx)(Nu,{className:`w-4 h-4`}),`Clear`]}),(0,G.jsx)(`button`,{onClick:()=>g(),disabled:h,className:`flex items-center gap-1.5 px-3 py-1.5 text-sm bg-bambu-dark-tertiary text-bambu-gray hover:text-white hover:bg-bambu-dark-secondary rounded transition-colors disabled:opacity-50`,children:(0,G.jsx)(Vl,{className:`w-4 h-4 ${h?`animate-spin`:``}`})}),(0,G.jsx)(`div`,{className:`flex-1`}),(0,G.jsxs)(`label`,{className:`flex items-center gap-2 text-sm text-bambu-gray cursor-pointer`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:t,onChange:e=>n(e.target.checked),className:`rounded border-bambu-dark-tertiary bg-bambu-dark-tertiary`}),`Auto-scroll`]}),(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[m?.filtered_count??0,`/`,m?.total_in_file??0]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`div`,{className:`relative flex-1`,children:[(0,G.jsx)(Zl,{className:`absolute left-2.5 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`input`,{type:`text`,placeholder:`Search message or logger name...`,value:a,onChange:e=>o(e.target.value),className:`w-full pl-8 pr-8 py-1.5 text-sm bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none`}),a&&(0,G.jsx)(`button`,{onClick:()=>o(``),className:`absolute right-2 top-1/2 -translate-y-1/2 text-bambu-gray hover:text-white`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 bg-bambu-dark-secondary rounded border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`button`,{onClick:()=>c(`ALL`),className:`px-2 py-1.5 text-xs rounded-l transition-colors ${s===`ALL`?`bg-bambu-green text-white`:`text-bambu-gray hover:text-white`}`,children:`All`}),g0e.map((e,t)=>(0,G.jsx)(`button`,{onClick:()=>c(e),className:`px-2 py-1.5 text-xs transition-colors flex items-center gap-1 ${t===g0e.length-1?`rounded-r`:``} ${s===e?`${N9[e]} bg-bambu-dark-tertiary`:`text-bambu-gray hover:text-white`}`,children:e},e))]})]})]}),(0,G.jsx)(`div`,{ref:p,className:`overflow-auto font-mono text-xs bg-black min-h-[300px] max-h-[500px]`,children:x.length===0?(0,G.jsxs)(`div`,{className:`flex flex-col items-center justify-center h-[300px] text-bambu-gray`,children:[(0,G.jsx)(`p`,{className:`mb-2`,children:`No log entries found`}),(0,G.jsx)(`p`,{className:`text-sm`,children:`Log file may be empty or cleared`})]}):(0,G.jsx)(`div`,{className:`divide-y divide-bambu-dark-tertiary/30`,children:S.map((e,t)=>{let n=r.has(t),i=e.message.includes(`
 `);return(0,G.jsx)(`div`,{className:`p-2 cursor-pointer hover:bg-bambu-dark-secondary/50 transition-colors ${n?`bg-bambu-dark-secondary/30`:``}`,onClick:()=>i&&v(t),children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray/70 shrink-0 w-20`,children:b(e.timestamp)}),(0,G.jsx)(`span`,{className:`shrink-0`,children:(0,G.jsx)(C,{level:e.level})}),(0,G.jsxs)(`span`,{className:`text-purple-400/80 shrink-0 max-w-[200px] truncate`,title:e.logger_name,children:[`[`,e.logger_name,`]`]}),(0,G.jsx)(`span`,{className:`flex-1 ${N9[e.level]||`text-white/80`} ${!n&&i?`truncate`:``}`,children:n?(0,G.jsx)(`pre`,{className:`whitespace-pre-wrap break-all`,children:e.message}):e.message.split(`
-`)[0]}),i&&(0,G.jsx)(`span`,{className:`text-bambu-gray/50 shrink-0`,children:n?(0,G.jsx)(gs,{className:`w-3.5 h-3.5`}):(0,G.jsx)(ps,{className:`w-3.5 h-3.5`})})]})},t)})})}),(0,G.jsx)(`div`,{className:`flex items-center justify-between p-3 border-t border-bambu-dark-tertiary text-sm text-bambu-gray`,children:d?(0,G.jsxs)(`span`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`w-2 h-2 bg-green-500 rounded-full animate-pulse`}),`Auto-refreshing every 2 seconds`]}):(0,G.jsx)(`span`,{children:`Click Start to enable live log streaming`})})]})]})}function g0e(e){return e<1024?`${e} B`:e<1024*1024?`${(e/1024).toFixed(1)} KB`:e<1024*1024*1024?`${(e/(1024*1024)).toFixed(1)} MB`:`${(e/(1024*1024*1024)).toFixed(2)} GB`}function P9({icon:e,label:t,value:n,subValue:r,color:i=`text-bambu-green`}){return(0,G.jsxs)(`div`,{className:`flex items-start gap-3 p-4 bg-bambu-dark rounded-lg`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg bg-bambu-dark-tertiary ${i}`,children:(0,G.jsx)(e,{className:`w-5 h-5`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:t}),(0,G.jsx)(`p`,{className:`text-lg font-semibold text-white truncate`,children:n}),r&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:r})]})]})}function _0e({percent:e,color:t=`bg-bambu-green`}){return(0,G.jsx)(`div`,{className:`w-full h-2 bg-bambu-dark rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full ${t} transition-all duration-300`,style:{width:`${Math.min(100,e)}%`}})})}function F9({title:e,icon:t,children:n}){return(0,G.jsxs)(Ld,{className:`p-6`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-4`,children:[(0,G.jsx)(t,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e})]}),n]})}function v0e(){let{t:e}=U(),t=co(),[n,r]=(0,y.useState)(null),[i,a]=(0,y.useState)(!1),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(null),{data:u,isLoading:d,refetch:f,isFetching:p}=K({queryKey:[`systemInfo`],queryFn:Z.getSystemInfo,refetchInterval:3e4}),{data:m}=K({queryKey:[`debugLogging`],queryFn:Ed.getDebugLoggingState,staleTime:10*1e3,refetchInterval:10*1e3}),{data:h}=K({queryKey:[`settings`],queryFn:Z.getSettings}),{data:g}=K({queryKey:[`library-stats`],queryFn:Z.getLibraryStats}),{data:_}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:v,refetch:b,isFetching:x}=K({queryKey:[`systemHealth`],queryFn:Z.getSystemHealth,staleTime:60*1e3}),S=h?.time_format||`system`,C=async()=>{s(!0);try{let e=await Ed.setDebugLogging(!m?.enabled);t.setQueryData([`debugLogging`],e)}catch(e){console.error(`Failed to toggle debug logging:`,e)}finally{s(!1)}},w=async()=>{r(null),a(!0);try{await Ed.downloadSupportBundle()}catch(e){r(e instanceof Error?e.message:`Failed to download support bundle`)}finally{a(!1)}};if(d)return(0,G.jsx)(`div`,{className:`flex items-center justify-center h-64`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})});if(!u)return(0,G.jsx)(`div`,{className:`p-6 text-center text-bambu-gray`,children:e(`system.failedToLoad`,`Failed to load system information`)});let T=u.storage.disk_percent_used>90?`bg-red-500`:u.storage.disk_percent_used>75?`bg-yellow-500`:`bg-bambu-green`,E=u.memory.percent_used>90?`bg-red-500`:u.memory.percent_used>75?`bg-yellow-500`:`bg-bambu-green`;return(0,G.jsxs)(`div`,{className:`p-6 space-y-6`,children:[(0,G.jsxs)(`div`,{className:`flex flex-col items-start gap-4 sm:flex-row sm:items-center sm:justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h1`,{className:`text-2xl font-bold text-white`,children:e(`system.title`,`System Information`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:e(`system.subtitle`,`Monitor system resources and database statistics`)})]}),(0,G.jsxs)(`button`,{onClick:()=>f(),disabled:p,className:`flex items-center gap-2 px-4 py-2 bg-bambu-dark-secondary hover:bg-bambu-dark-tertiary rounded-lg transition-colors disabled:opacity-50`,children:[(0,G.jsx)(Vl,{className:`w-4 h-4 ${p?`animate-spin`:``}`}),e(`common.refresh`,`Refresh`)]})]}),(0,G.jsx)(F9,{title:e(`system.application`,`Application`),icon:eu,children:(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-3 gap-4`,children:[(0,G.jsx)(P9,{icon:eu,label:e(`system.version`,`Version`),value:`v${u.app.version}`}),(0,G.jsx)(P9,{icon:js,label:e(`system.uptime`,`System Uptime`),value:u.system.uptime_formatted}),(0,G.jsx)(P9,{icon:eu,label:e(`system.hostname`,`Hostname`),value:u.system.hostname})]})}),(0,G.jsx)(F9,{title:e(`support.title`,`Support & Troubleshooting`),icon:Fc,children:(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`support.description`,`Enable debug logging to capture detailed information, then download a support bundle to share when reporting issues.`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg ${m?.enabled?`bg-amber-500/20 text-amber-500`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:(0,G.jsx)($o,{className:`w-5 h-5`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`font-medium text-white`,children:e(`support.debugLogging`,`Debug Logging`)}),(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[m?.enabled?e(`support.debugLoggingEnabled`,`Capturing detailed logs`):e(`support.debugLoggingDisabled`,`Normal logging level`),m?.enabled&&m.duration_seconds!==null&&(0,G.jsxs)(`span`,{className:`text-amber-700 dark:text-amber-400 ml-2`,children:[`(`,Math.floor(m.duration_seconds/60),`m `,m.duration_seconds%60,`s)`]})]})]})]}),(0,G.jsxs)(`button`,{onClick:C,disabled:o,className:`px-4 py-2 rounded-lg font-medium transition-colors flex items-center gap-2 ${m?.enabled?`bg-amber-100 text-amber-700 hover:bg-amber-200 dark:bg-amber-500/20 dark:text-amber-400 dark:hover:bg-amber-500/30`:`bg-bambu-green/20 text-bambu-green hover:bg-bambu-green/30`} disabled:opacity-50`,children:[o&&(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),m?.enabled?e(`support.disableDebug`,`Disable`):e(`support.enableDebug`,`Enable`)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg bg-bambu-dark-tertiary text-bambu-green`,children:(0,G.jsx)(Ys,{className:`w-5 h-5`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`font-medium text-white`,children:e(`support.supportBundle`,`Support Bundle`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`support.supportBundleDescription`,`Download system info and logs as a ZIP file`)})]})]}),(0,G.jsxs)(`button`,{onClick:w,disabled:i||!m?.enabled,className:`px-4 py-2 rounded-lg font-medium bg-bambu-green/20 text-bambu-green hover:bg-bambu-green/30 transition-colors flex items-center gap-2 disabled:opacity-50 disabled:cursor-not-allowed`,title:m?.enabled?void 0:e(`support.enableDebugFirst`,`Enable debug logging first`),children:[i&&(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),i?e(`support.bundleGenerating`,`Generating...`):e(`common.download`,`Download`)]})]}),i&&(0,G.jsxs)(`div`,{className:`p-3 bg-bambu-dark-tertiary/40 rounded-lg space-y-1`,children:[(0,G.jsxs)(`p`,{className:`text-sm font-medium text-white flex items-center gap-2`,children:[(0,G.jsx)(Y,{className:`w-3.5 h-3.5 animate-spin text-bambu-green`}),e(`support.bundleGenerating`,`Generating...`)]}),(0,G.jsxs)(`ul`,{className:`text-xs text-bambu-gray list-disc list-inside space-y-0.5 pl-1`,children:[(0,G.jsx)(`li`,{children:e(`support.bundleStepConnection`,`Running printer connectivity checks`)}),(0,G.jsx)(`li`,{children:e(`support.bundleStepVirtualPrinters`,`Running virtual-printer setup checks`)}),(0,G.jsx)(`li`,{children:e(`support.bundleStepLogScan`,`Scanning recent logs for known issues`)}),(0,G.jsx)(`li`,{children:e(`support.bundleStepBuild`,`Building the support bundle ZIP`)})]})]}),n&&(0,G.jsx)(`div`,{className:`p-3 bg-red-100 border border-red-300 rounded-lg text-red-700 dark:bg-red-500/20 dark:border-red-500/30 dark:text-red-400 text-sm`,children:n}),!m?.enabled&&(0,G.jsx)(`div`,{className:`p-4 bg-bambu-dark-tertiary/50 rounded-lg`,children:(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[(0,G.jsx)(`span`,{className:`text-amber-700 dark:text-amber-400 font-medium`,children:e(`support.instructions`,`To report an issue:`)}),(0,G.jsx)(`br`,{}),`1. `,e(`support.step1`,`Enable debug logging`),(0,G.jsx)(`br`,{}),`2. `,e(`support.step2`,`Reproduce the issue`),(0,G.jsx)(`br`,{}),`3. `,e(`support.step3`,`Download the support bundle`),(0,G.jsx)(`br`,{}),`4. `,e(`support.step4`,`Attach the ZIP file to your issue report`)]})}),(0,G.jsxs)(`div`,{className:`p-4 bg-bambu-dark rounded-lg space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white`,children:e(`support.privacyTitle`,`What's in the support bundle?`)}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-4 text-sm`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-bambu-green font-medium mb-1`,children:e(`support.collected`,`Collected:`)}),(0,G.jsxs)(`ul`,{className:`text-bambu-gray space-y-0.5`,children:[(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem1`,`App version and debug mode`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem2`,`OS, architecture, Python version`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem3`,`Database statistics (counts only)`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem4`,`Printer models and nozzle counts`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem5`,`Non-sensitive settings (themes, formats)`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem6`,`Debug logs (sanitized)`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem7`,`Printer connectivity and firmware versions`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem8`,`Integration status (Spoolman, MQTT, HA)`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem9`,`Network interfaces (subnets only)`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem10`,`Python package versions`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem11`,`Database health checks`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem12`,`Docker environment details`)]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-red-700 dark:text-red-400 font-medium mb-1`,children:e(`support.notCollected`,`NOT collected:`)}),(0,G.jsxs)(`ul`,{className:`text-bambu-gray space-y-0.5`,children:[(0,G.jsxs)(`li`,{children:[`• `,e(`support.notItem1`,`Printer names and serial numbers`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.notItem2`,`Access codes and passwords`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.notItem3`,`Email addresses`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.notItem4`,`API keys and tokens`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.notItem5`,`Webhook URLs`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.notItem6`,`Your hostname or username`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.notItem7`,`IP addresses`)]})]})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/70`,children:e(`support.privacyNote`,`Email addresses in logs are replaced with [EMAIL], printer names with [PRINTER], serial numbers with [SERIAL], and IP addresses with [IP].`)})]}),(0,G.jsx)(h0e,{})]})}),(0,G.jsxs)(F9,{title:e(`diagnostic.sectionTitle`,`Connection Diagnostic`),icon:xu,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4`,children:e(`diagnostic.sectionDescription`,`Check why a printer won't connect or won't print — port reachability, LAN developer mode, Docker network mode, and credentials.`)}),_&&_.length>0?(0,G.jsx)(`div`,{className:`space-y-2`,children:_.map(t=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-3 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`span`,{className:`font-medium text-white`,children:t.name}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray ml-2`,children:t.ip_address})]}),(0,G.jsxs)(`button`,{onClick:()=>l(t),className:`flex items-center gap-2 px-3 py-1.5 text-sm bg-bambu-dark-secondary hover:bg-bambu-dark-tertiary text-white rounded-lg transition-colors flex-shrink-0`,children:[(0,G.jsx)(xu,{className:`w-4 h-4`}),e(`diagnostic.runButton`,`Run diagnostic`)]})]},t.id))}):(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`diagnostic.noPrinters`,`No printers configured.`)})]}),(0,G.jsxs)(F9,{title:e(`systemHealth.sectionTitle`),icon:Ic,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-3 mb-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`systemHealth.sectionDescription`)}),(0,G.jsxs)(`button`,{onClick:()=>b(),disabled:x,className:`flex items-center gap-2 px-3 py-1.5 text-sm bg-bambu-dark-secondary hover:bg-bambu-dark-tertiary text-white rounded-lg transition-colors flex-shrink-0 disabled:opacity-50`,children:[(0,G.jsx)(Vl,{className:`w-4 h-4 ${x?`animate-spin`:``}`}),e(`systemHealth.rescan`)]})]}),v?(0,G.jsx)(Kp,{result:v}):(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`common.loading`)})]}),(0,G.jsxs)(F9,{title:e(`system.database`,`Database`),icon:Ws,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-4 mb-4`,children:[(0,G.jsx)(P9,{icon:Ws,label:e(`system.dbEngine`,`Database Engine`),value:u.database.engine||`SQLite`}),(0,G.jsx)(P9,{icon:Ws,label:e(`system.dbVersion`,`Version`),value:u.database.version||`unknown`})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 md:grid-cols-4 gap-4 mb-4`,children:[(0,G.jsx)(P9,{icon:Po,label:e(`system.totalArchives`,`Total Archives`),value:u.database.archives}),(0,G.jsx)(P9,{icon:Ss,label:e(`system.completed`,`Completed`),value:u.database.archives_completed,color:`text-green-500`}),(0,G.jsx)(P9,{icon:Ds,label:e(`system.failed`,`Failed`),value:u.database.archives_failed,color:`text-red-500`}),(0,G.jsx)(P9,{icon:Y,label:e(`system.printing`,`Printing`),value:u.database.archives_printing,color:`text-yellow-500`})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 md:grid-cols-4 gap-4`,children:[(0,G.jsx)(P9,{icon:Ll,label:e(`system.printers`,`Printers`),value:u.database.printers}),(0,G.jsx)(P9,{icon:Cl,label:e(`system.filaments`,`Filaments`),value:u.database.filaments}),(0,G.jsx)(P9,{icon:gc,label:e(`system.projects`,`Projects`),value:u.database.projects}),(0,G.jsx)(P9,{icon:Nl,label:e(`system.smartPlugs`,`Smart Plugs`),value:u.database.smart_plugs})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-4 mt-4`,children:[(0,G.jsx)(P9,{icon:js,label:e(`system.totalPrintTime`,`Total Print Time`),value:u.database.total_print_time_formatted}),(0,G.jsx)(P9,{icon:Po,label:e(`system.totalFilament`,`Total Filament Used`),value:`${u.database.total_filament_kg} kg`,subValue:`${u.database.total_filament_grams.toLocaleString()} g`})]})]}),(0,G.jsxs)(F9,{title:e(`system.connectedPrinters`,`Connected Printers`),icon:Ll,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-4 mb-4`,children:[(0,G.jsx)(`div`,{className:`text-3xl font-bold text-bambu-green`,children:u.printers.connected}),(0,G.jsx)(`div`,{className:`text-bambu-gray`,children:e(`system.ofTotal`,`of {{total}} printers connected`,{total:u.printers.total})})]}),u.printers.connected_list.length>0?(0,G.jsx)(`div`,{className:`space-y-2`,children:u.printers.connected_list.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-3 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full bg-bambu-green`}),(0,G.jsx)(`span`,{className:`font-medium text-white`,children:e.name})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-4 text-sm text-bambu-gray`,children:[(0,G.jsx)(`span`,{children:e.model}),(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded ${e.state===`RUNNING`?`bg-bambu-green/20 text-bambu-green`:e.state===`IDLE`?`bg-blue-100 text-blue-700 dark:bg-blue-500/20 dark:text-blue-400`:`bg-bambu-dark-tertiary`}`,children:e.state})]})]},e.id))}):(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`system.noPrintersConnected`,`No printers connected`)})]}),(0,G.jsx)(F9,{title:e(`system.storage`,`Storage`),icon:Nc,children:(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex justify-between text-sm mb-1`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:e(`system.diskUsage`,`Disk Usage`)}),(0,G.jsxs)(`span`,{className:`text-white`,children:[u.storage.disk_used_formatted,` / `,u.storage.disk_total_formatted]})]}),(0,G.jsx)(_0e,{percent:u.storage.disk_percent_used,color:T}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:[u.storage.disk_free_formatted,` `,e(`system.free`,`free`),` (`,(100-u.storage.disk_percent_used).toFixed(1),`%)`]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-3 gap-4`,children:[(0,G.jsx)(P9,{icon:Po,label:e(`system.archiveStorage`,`Archive Storage`),value:u.storage.archive_size_formatted}),(0,G.jsx)(P9,{icon:Ws,label:e(`system.databaseSize`,`Database Size`),value:u.storage.database_size_formatted}),g&&(0,G.jsx)(P9,{icon:_c,label:e(`system.fileManagerStorage`,`File Manager`),value:g0e(g.total_size_bytes),subValue:`${g.total_files} files, ${g.total_folders} folders`})]})]})}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-6`,children:[(0,G.jsx)(F9,{title:e(`system.memory`,`Memory`),icon:ll,children:(0,G.jsx)(`div`,{className:`space-y-4`,children:(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex justify-between text-sm mb-1`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:e(`system.memoryUsage`,`Memory Usage`)}),(0,G.jsxs)(`span`,{className:`text-white`,children:[u.memory.used_formatted,` / `,u.memory.total_formatted]})]}),(0,G.jsx)(_0e,{percent:u.memory.percent_used,color:E}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:[u.memory.available_formatted,` `,e(`system.available`,`available`)]})]})})}),(0,G.jsx)(F9,{title:e(`system.cpu`,`CPU`),icon:Hs,children:(0,G.jsx)(`div`,{className:`space-y-4`,children:(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-4`,children:[(0,G.jsx)(P9,{icon:Hs,label:e(`system.cores`,`Cores`),value:u.cpu.count,subValue:`${u.cpu.count_logical} logical`}),(0,G.jsx)(P9,{icon:Hs,label:e(`system.usage`,`Usage`),value:`${u.cpu.percent}%`})]})})})]}),(0,G.jsx)(F9,{title:e(`system.systemDetails`,`System Details`),icon:eu,children:(0,G.jsxs)(`div`,{className:`grid grid-cols-2 md:grid-cols-4 gap-4`,children:[(0,G.jsx)(P9,{icon:eu,label:e(`system.os`,`Operating System`),value:u.system.platform,subValue:u.system.platform_release}),(0,G.jsx)(P9,{icon:Hs,label:e(`system.architecture`,`Architecture`),value:u.system.architecture}),(0,G.jsx)(P9,{icon:eu,label:e(`system.python`,`Python`),value:u.system.python_version}),(0,G.jsx)(P9,{icon:js,label:e(`system.bootTime`,`Boot Time`),value:rp(u.system.boot_time,S)})]})}),c&&(0,G.jsx)(Wp,{printerId:c.id,printerName:c.name,onClose:()=>l(null)})]})}var I9=`auth_remember_me`,L9=`auth_post_login_redirect`;function R9(e){return e?`persistent`:`session`}function y0e(){try{let e=sessionStorage.getItem(I9)===`1`;return sessionStorage.removeItem(I9),e}catch(e){return console.warn(`consumeSavedRememberMe: sessionStorage unavailable, Remember Me preference lost across OIDC redirect`,e),!1}}function z9(e){return!e||!e.startsWith(`/`)||e.startsWith(`//`)||e.startsWith(`/login`)?null:e}function b0e(e){let t=z9(e);if(t)try{sessionStorage.setItem(L9,t)}catch(e){console.warn(`stashPostLoginRedirect: sessionStorage unavailable, post-login target will be lost across OIDC redirect`,e)}}function x0e(){try{let e=sessionStorage.getItem(L9);return sessionStorage.removeItem(L9),z9(e)}catch(e){return console.warn(`consumePostLoginRedirect: sessionStorage unavailable`,e),null}}function S0e({provider:e,onClick:t,disabled:n}){let{t:r}=U(),[i,a]=(0,y.useState)(!1);return(0,G.jsxs)(`button`,{type:`button`,onClick:t,disabled:n,className:`w-full flex items-center justify-center gap-3 py-3 px-4 bg-bambu-dark-secondary border border-bambu-dark-tertiary hover:border-bambu-green/50 rounded-lg text-white font-medium transition-colors disabled:opacity-50`,children:[e.has_icon&&!i?(0,G.jsx)(`img`,{src:Z.oidcProviderIconUrl(e.id),alt:``,className:`w-5 h-5 object-contain`,onError:()=>a(!0)}):(0,G.jsx)(ou,{className:`w-5 h-5 text-bambu-green`}),r(`login.twoFA.signInWith`,{provider:e.name})]})}function C0e(){let e=or(),t=rr(),[n]=Ri(),{t:r}=U(),{login:i,loginWithToken:a,user:o,loading:s}=jd(),{showToast:c}=Gd(),{mode:l}=Pd();function u(){let e=t.state?.from;if(e?.pathname){let t=z9(`${e.pathname}${e.search??``}`);if(t)return t}return x0e()??`/`}let[d,f]=(0,y.useState)(``),[p,m]=(0,y.useState)(``),[h,g]=(0,y.useState)(!1),[_,v]=(0,y.useState)(``),[b,x]=(0,y.useState)(`credentials`),[S,C]=(0,y.useState)(``),[w,T]=(0,y.useState)([]),[E,D]=(0,y.useState)(`totp`),[O,k]=(0,y.useState)(``),[A,j]=(0,y.useState)(!1),M=(0,y.useRef)(null),[N,P]=(0,y.useState)(!1),[F,I]=(0,y.useState)(``),[L,R]=(0,y.useState)(``),[z,B]=(0,y.useState)(``),{data:V}=K({queryKey:[`advancedAuthStatus`],queryFn:()=>Z.getAdvancedAuthStatus()}),{data:ee}=K({queryKey:[`oidcProviders`],queryFn:()=>Z.getOIDCProviders()}),[te,ne]=(0,y.useState)(!1);(0,y.useEffect)(()=>{!s&&o&&b===`credentials`&&e(`/`,{replace:!0})},[s,o,b,e]);let re=(0,y.useRef)(!1);(0,y.useEffect)(()=>{if(re.current||n.get(`fallback`)===`local`||!V||!V.autologin_provider_id||window.location.hash.startsWith(`#oidc_token=`)||n.get(`oidc_error`))return;re.current=!0;let e=V.autologin_provider_id,t=new Promise((e,t)=>setTimeout(()=>t(Error(`autologin timeout`)),5e3));Promise.race([Z.getOIDCAuthorizeUrl(e),t]).then(e=>{window.location.href=e.auth_url}).catch(()=>{ne(!0)})},[V,n]);let ie=V?.local_login_enabled!==!1,ae=te&&V?.autologin_provider_id!=null;(0,y.useEffect)(()=>{let t=window.location.hash,n=t.startsWith(`#reset_token=`)?t.slice(13):null;n&&(I(n),x(`reset-password`),e(`/login`,{replace:!0}))},[]),(0,y.useEffect)(()=>{let t=window.location.hash,i=t.startsWith(`#oidc_token=`)?t.slice(12):null,o=n.get(`oidc_error`);if(!i&&!o)return;let s=y0e();if(o){c({oidc_provider_error:r(`login.oidcErrors.providerError`),missing_parameters:r(`login.oidcErrors.missingParameters`),invalid_state:r(`login.oidcErrors.invalidState`),state_expired:r(`login.oidcErrors.stateExpired`),provider_not_found:r(`login.oidcErrors.providerNotFound`),discovery_failed:r(`login.oidcErrors.discoveryFailed`),invalid_discovery_document:r(`login.oidcErrors.invalidDiscovery`),token_exchange_network_error:r(`login.oidcErrors.networkError`),token_exchange_bad_response:r(`login.oidcErrors.badResponse`),no_id_token:r(`login.oidcErrors.noIdToken`),token_validation_failed:r(`login.oidcErrors.validationFailed`),nonce_mismatch:r(`login.oidcErrors.nonceMismatch`),missing_sub_claim:r(`login.oidcErrors.missingSubClaim`),no_linked_account:r(`login.oidcErrors.noLinkedAccount`),account_inactive:r(`login.oidcErrors.accountInactive`),user_resolution_failed:r(`login.oidcErrors.userResolutionFailed`),internal_error:r(`login.oidcErrors.internalError`)}[o]??(o.startsWith(`token_exchange_`)?r(`login.oidcErrors.tokenExchangeFailed`):r(`login.oidcLoginFailed`)),`error`),e(`/login`,{replace:!0});return}i&&Z.exchangeOIDCToken(i).then(t=>{if(t.requires_2fa&&t.pre_auth_token){P(s),C(t.pre_auth_token);let n=t.two_fa_methods??[];T(n),n.includes(`totp`)?D(`totp`):n.includes(`email`)?D(`email`):D(`backup`),x(`2fa`),e(`/login`,{replace:!0})}else t.access_token&&t.user?(a(t.access_token,t.user,R9(s)),c(r(`login.loginSuccess`)),e(u(),{replace:!0})):(c(r(`login.oidcLoginFailed`),`error`),e(`/login`,{replace:!0}))}).catch(t=>{console.error(`OIDC token exchange failed`,t),c(r(`login.oidcLoginFailed`),`error`),e(`/login`,{replace:!0})})},[n]);let oe=q({mutationFn:()=>i(d,p,R9(N)),onSuccess:t=>{if(t.requires_2fa&&t.pre_auth_token){C(t.pre_auth_token);let e=t.two_fa_methods??[];T(e),e.includes(`totp`)?D(`totp`):e.includes(`email`)?D(`email`):D(`backup`),x(`2fa`)}else t.access_token&&t.user&&(c(r(`login.loginSuccess`)),e(u(),{replace:!0}))},onError:e=>{c(e.message||r(`login.loginFailed`),`error`)}}),se=q({mutationFn:e=>Z.forgotPassword({email:e}),onSuccess:e=>{c(e.message,`success`),g(!1),v(``)},onError:e=>{c(e.message,`error`)}}),H=q({mutationFn:()=>Z.forgotPasswordConfirm(F,L),onSuccess:e=>{c(e.message,`success`),x(`credentials`),I(``),R(``),B(``)},onError:e=>{c(e.message||r(`login.resetPassword.resetFailed`),`error`)}}),ce=q({mutationFn:()=>Z.sendEmailOTP(S),onSuccess:e=>{j(!0),e.pre_auth_token&&C(e.pre_auth_token),c(e.message,`success`)},onError:e=>{c(e.message||r(`login.twoFA.sendCodeFailed`),`error`)}}),le=q({mutationFn:()=>Z.verify2FA({pre_auth_token:S,code:O,method:E}),onSuccess:t=>{t.access_token&&t.user?(a(t.access_token,t.user,R9(N)),c(r(`login.loginSuccess`)),e(u(),{replace:!0})):(console.error(`2FA verify: unexpected response shape`,t),c(r(`login.loginFailed`),`error`))},onError:e=>{c(e.message||r(`login.twoFA.invalidCode`),`error`),k(``)}}),ue=q({mutationFn:e=>Z.getOIDCAuthorizeUrl(e),onSuccess:e=>{if(N)try{sessionStorage.setItem(I9,`1`)}catch(e){console.warn(`setItem auth_remember_me failed, Remember Me will not carry through OIDC redirect`,e)}let n=t.state?.from;n?.pathname&&b0e(`${n.pathname}${n.search??``}`),window.location.href=e.auth_url},onError:e=>{c(e.message||r(`login.oidcLoginFailed`),`error`)}}),de=e=>{if(e.preventDefault(),!d||!p){c(r(`login.enterCredentials`),`error`);return}oe.mutate()},fe=e=>{if(e.preventDefault(),!O.trim()){c(r(`login.twoFA.enterCode`),`error`);return}le.mutate()},pe=e=>{if(e.preventDefault(),!_){c(r(`login.enterEmail`),`error`);return}se.mutate(_)},me=e=>{D(e),k(``),j(!1),setTimeout(()=>M.current?.focus(),0)};return b===`reset-password`?(0,G.jsx)(`div`,{className:`min-h-screen flex items-center justify-center bg-bambu-dark p-4`,children:(0,G.jsxs)(`div`,{className:`max-w-md w-full space-y-8 p-8 bg-gradient-to-br from-bambu-card to-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary shadow-lg`,children:[(0,G.jsxs)(`div`,{className:`text-center`,children:[(0,G.jsx)(`div`,{className:`flex items-center justify-center mb-4`,children:(0,G.jsx)(`div`,{className:`w-14 h-14 rounded-full bg-bambu-green/20 flex items-center justify-center`,children:(0,G.jsx)(Gc,{className:`w-7 h-7 text-bambu-green`})})}),(0,G.jsx)(`h2`,{className:`text-2xl font-bold text-white`,children:r(`login.resetPassword.title`)}),(0,G.jsx)(`p`,{className:`mt-2 text-sm text-bambu-gray`,children:r(`login.resetPassword.subtitle`)})]}),(0,G.jsxs)(`form`,{onSubmit:e=>{if(e.preventDefault(),L!==z){c(r(`login.resetPassword.passwordsDoNotMatch`),`error`);return}if(L.length<8){c(r(`login.resetPassword.passwordTooShort`),`error`);return}H.mutate()},className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`new-password`,className:`block text-sm font-medium text-white mb-2`,children:r(`login.resetPassword.newPassword`)}),(0,G.jsx)(`input`,{id:`new-password`,type:`password`,required:!0,value:L,onChange:e=>R(e.target.value),className:`block w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:r(`login.resetPassword.newPasswordPlaceholder`),autoFocus:!0,autoComplete:`new-password`,minLength:8})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`confirm-password`,className:`block text-sm font-medium text-white mb-2`,children:r(`login.resetPassword.confirmPassword`)}),(0,G.jsx)(`input`,{id:`confirm-password`,type:`password`,required:!0,value:z,onChange:e=>B(e.target.value),className:`block w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:r(`login.resetPassword.confirmPasswordPlaceholder`),autoComplete:`new-password`})]}),(0,G.jsx)(`button`,{type:`submit`,disabled:H.isPending||!L||!z,className:`w-full flex justify-center py-3 px-4 bg-bambu-green hover:bg-bambu-green-light text-white font-medium rounded-lg shadow-lg shadow-bambu-green/20 hover:shadow-bambu-green/30 focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:ring-offset-2 focus:ring-offset-bambu-dark-secondary transition-all disabled:opacity-50 disabled:cursor-not-allowed`,children:H.isPending?r(`login.resetPassword.saving`):r(`login.resetPassword.submit`)})]}),(0,G.jsx)(`div`,{className:`text-center`,children:(0,G.jsx)(`button`,{type:`button`,onClick:()=>{x(`credentials`),I(``),R(``),B(``)},className:`text-sm text-bambu-gray hover:text-bambu-green transition-colors`,children:r(`login.resetPassword.backToLogin`)})})]})}):b===`2fa`?(0,G.jsx)(`div`,{className:`min-h-screen flex items-center justify-center bg-bambu-dark p-4`,children:(0,G.jsxs)(`div`,{className:`max-w-md w-full space-y-8 p-8 bg-gradient-to-br from-bambu-card to-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary shadow-lg`,children:[(0,G.jsxs)(`div`,{className:`text-center`,children:[(0,G.jsx)(`div`,{className:`flex items-center justify-center mb-4`,children:(0,G.jsx)(`div`,{className:`w-14 h-14 rounded-full bg-bambu-green/20 flex items-center justify-center`,children:(0,G.jsx)(ou,{className:`w-7 h-7 text-bambu-green`})})}),(0,G.jsx)(`h2`,{className:`text-2xl font-bold text-white`,children:r(`login.twoFA.title`)}),(0,G.jsx)(`p`,{className:`mt-2 text-sm text-bambu-gray`,children:r(`login.twoFA.subtitle`)})]}),w.length>1&&(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[w.includes(`totp`)&&(0,G.jsxs)(`button`,{type:`button`,onClick:()=>me(`totp`),className:`flex-1 flex flex-col items-center gap-1 py-2 px-3 rounded-lg border text-xs font-medium transition-colors ${E===`totp`?`border-bambu-green bg-bambu-green/10 text-bambu-green`:`border-bambu-dark-tertiary text-bambu-gray hover:border-bambu-green/50`}`,children:[(0,G.jsx)(pu,{className:`w-4 h-4`}),r(`login.twoFA.methodAuthenticator`)]}),w.includes(`email`)&&(0,G.jsxs)(`button`,{type:`button`,onClick:()=>me(`email`),className:`flex-1 flex flex-col items-center gap-1 py-2 px-3 rounded-lg border text-xs font-medium transition-colors ${E===`email`?`border-bambu-green bg-bambu-green/10 text-bambu-green`:`border-bambu-dark-tertiary text-bambu-gray hover:border-bambu-green/50`}`,children:[(0,G.jsx)(il,{className:`w-4 h-4`}),r(`login.twoFA.methodEmail`)]}),w.includes(`backup`)&&(0,G.jsxs)(`button`,{type:`button`,onClick:()=>me(`backup`),className:`flex-1 flex flex-col items-center gap-1 py-2 px-3 rounded-lg border text-xs font-medium transition-colors ${E===`backup`?`border-bambu-green bg-bambu-green/10 text-bambu-green`:`border-bambu-dark-tertiary text-bambu-gray hover:border-bambu-green/50`}`,children:[(0,G.jsx)(Gc,{className:`w-4 h-4`}),r(`login.twoFA.methodBackup`)]})]}),(0,G.jsxs)(`form`,{onSubmit:fe,className:`space-y-4`,children:[E===`totp`&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:r(`login.twoFA.instructionsTotp`)}),E===`email`&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:r(A?`login.twoFA.instructionsEmail`:`login.twoFA.instructionsEmailNotSent`)}),!A&&(0,G.jsx)(Q,{type:`button`,variant:`secondary`,className:`w-full`,onClick:()=>ce.mutate(),disabled:ce.isPending,children:ce.isPending?r(`login.twoFA.sendingCode`):r(`login.twoFA.sendCodeButton`)}),A&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>{j(!1),ce.mutate()},className:`text-xs text-bambu-gray hover:text-bambu-green transition-colors`,children:r(`login.twoFA.resendCode`)})]}),E===`backup`&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:r(`login.twoFA.instructionsBackup`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`twofa-code`,className:`block text-sm font-medium text-white mb-2`,children:r(E===`backup`?`login.twoFA.backupCodeLabel`:`login.twoFA.codeLabel`)}),(0,G.jsx)(`input`,{ref:M,id:`twofa-code`,type:`text`,inputMode:E===`backup`?`text`:`numeric`,autoComplete:`one-time-code`,value:O,onChange:e=>k(e.target.value.trim()),disabled:E===`email`&&!A,className:`block w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray text-center tracking-widest text-xl font-mono focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors disabled:opacity-40`,placeholder:r(E===`backup`?`login.twoFA.backupCodePlaceholder`:`login.twoFA.codePlaceholder`),maxLength:E===`backup`?8:6,autoFocus:!0})]}),(0,G.jsx)(`button`,{type:`submit`,disabled:le.isPending||!O.trim()||E===`email`&&!A,className:`w-full flex justify-center py-3 px-4 bg-bambu-green hover:bg-bambu-green-light text-white font-medium rounded-lg shadow-lg shadow-bambu-green/20 hover:shadow-bambu-green/30 focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:ring-offset-2 focus:ring-offset-bambu-dark-secondary transition-all disabled:opacity-50 disabled:cursor-not-allowed`,children:le.isPending?r(`login.twoFA.verifyingButton`):r(`login.twoFA.verifyButton`)})]}),(0,G.jsx)(`div`,{className:`text-center`,children:(0,G.jsx)(`button`,{type:`button`,onClick:()=>{x(`credentials`),C(``),k(``),j(!1)},className:`text-sm text-bambu-gray hover:text-bambu-green transition-colors`,children:r(`login.twoFA.backToLogin`)})})]})}):(0,G.jsxs)(`div`,{className:`min-h-screen flex items-center justify-center bg-bambu-dark p-4`,children:[(0,G.jsxs)(`div`,{className:`max-w-md w-full space-y-8 p-8 bg-gradient-to-br from-bambu-card to-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary shadow-lg`,children:[(0,G.jsxs)(`div`,{className:`text-center`,children:[(0,G.jsx)(`div`,{className:`flex items-center justify-center mb-6`,children:(0,G.jsx)(`img`,{src:l===`dark`?`/img/bambuddy_logo_dark_transparent.png`:`/img/bambuddy_logo_light.png`,alt:`Bambuddy`,className:`h-16`})}),(0,G.jsx)(`h2`,{className:`text-3xl font-bold text-white`,children:r(`login.title`)}),(0,G.jsx)(`p`,{className:`mt-2 text-sm text-bambu-gray`,children:r(`login.subtitle`)})]}),ae&&(0,G.jsx)(`div`,{className:`mt-6 rounded-lg border border-amber-300 dark:border-amber-500/40 bg-amber-50 dark:bg-amber-500/10 px-4 py-3 text-sm text-amber-800 dark:text-amber-200`,children:r(`login.autologinFailed`)}),!ie&&(0,G.jsx)(`div`,{className:`mt-6 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark/40 px-4 py-3 text-sm text-bambu-gray`,children:r(`login.localDisabledNotice`)}),ie&&(0,G.jsxs)(`form`,{className:`mt-8 space-y-6`,onSubmit:de,children:[(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`username`,className:`block text-sm font-medium text-white mb-2`,children:V?.advanced_auth_enabled?r(`login.usernameOrEmail`):r(`login.username`)}),(0,G.jsx)(`input`,{id:`username`,type:`text`,required:!0,value:d,onChange:e=>f(e.target.value),className:`block w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:V?.advanced_auth_enabled?r(`login.usernameOrEmailPlaceholder`):r(`login.usernamePlaceholder`),autoComplete:`username`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`password`,className:`block text-sm font-medium text-white mb-2`,children:r(`login.password`)||`Password`}),(0,G.jsx)(`input`,{id:`password`,type:`password`,required:!0,value:p,onChange:e=>m(e.target.value),className:`block w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:r(`login.passwordPlaceholder`),autoComplete:`current-password`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{id:`remember-me`,type:`checkbox`,checked:N,onChange:e=>P(e.target.checked),className:`h-4 w-4 rounded border-bambu-dark-tertiary bg-bambu-dark-secondary text-bambu-green focus:ring-bambu-green/50 cursor-pointer`}),(0,G.jsx)(`label`,{htmlFor:`remember-me`,className:`text-sm text-bambu-gray cursor-pointer`,children:r(`login.rememberMe`)})]}),(0,G.jsx)(`div`,{children:(0,G.jsx)(`button`,{type:`submit`,disabled:oe.isPending,className:`w-full flex justify-center py-3 px-4 bg-bambu-green hover:bg-bambu-green-light text-white font-medium rounded-lg shadow-lg shadow-bambu-green/20 hover:shadow-bambu-green/30 focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:ring-offset-2 focus:ring-offset-bambu-dark-secondary transition-all disabled:opacity-50 disabled:cursor-not-allowed disabled:hover:bg-bambu-green`,children:oe.isPending?r(`login.signingIn`):r(`login.signIn`)})}),(0,G.jsx)(`div`,{className:`text-center`,children:(0,G.jsx)(`button`,{type:`button`,onClick:()=>g(!0),className:`text-sm text-bambu-gray hover:text-bambu-green transition-colors`,children:r(`login.forgotPassword`)})})]}),ee&&ee.length>0&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 flex items-center`,children:(0,G.jsx)(`div`,{className:`w-full border-t border-bambu-dark-tertiary`})}),(0,G.jsx)(`div`,{className:`relative flex justify-center text-sm`,children:(0,G.jsx)(`span`,{className:`px-2 bg-bambu-dark-secondary text-bambu-gray`,children:r(`login.twoFA.orContinueWith`)})})]}),(0,G.jsx)(`div`,{className:`space-y-2`,children:ee.map(e=>(0,G.jsx)(S0e,{provider:e,onClick:()=>ue.mutate(e.id),disabled:ue.isPending},e.id))})]})]}),h&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:()=>g(!1),children:(0,G.jsxs)(Ld,{className:`w-full max-w-md`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(il,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:r(`login.forgotPasswordTitle`)})]}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>{g(!1),v(``)},children:(0,G.jsx)(td,{className:`w-5 h-5`})})]})}),(0,G.jsx)(zd,{children:V?.advanced_auth_enabled?(0,G.jsxs)(`form`,{onSubmit:pe,className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm`,children:r(`login.forgotPasswordEmailMessage`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`forgot-email`,className:`block text-sm font-medium text-white mb-2`,children:r(`login.emailAddress`)}),(0,G.jsx)(`input`,{id:`forgot-email`,type:`email`,required:!0,value:_,onChange:e=>v(e.target.value),className:`block w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:r(`login.emailPlaceholder`)})]}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,className:`flex-1`,onClick:()=>{g(!1),v(``)},children:r(`login.cancel`)}),(0,G.jsx)(Q,{type:`submit`,className:`flex-1`,disabled:se.isPending,children:se.isPending?r(`login.sending`):r(`login.sendResetEmail`)})]})]}):(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:r(`login.forgotPasswordMessage`)}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4 space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white font-medium`,children:r(`login.howToReset`)}),(0,G.jsxs)(`ol`,{className:`text-sm text-bambu-gray space-y-1 list-decimal list-inside`,children:[(0,G.jsx)(`li`,{children:r(`login.resetStep1`)}),(0,G.jsx)(`li`,{children:r(`login.resetStep2`)}),(0,G.jsx)(`li`,{children:r(`login.resetStep3`)}),(0,G.jsx)(`li`,{children:r(`login.resetStep4`)})]})]}),(0,G.jsx)(Q,{variant:`secondary`,className:`w-full`,onClick:()=>g(!1),children:r(`login.gotIt`)})]})})]})})]})}function w0e(){let e=or(),{t}=U(),{showToast:n}=Gd(),{mode:r}=Pd(),{refreshAuth:i}=jd(),[a,o]=(0,y.useState)(!1),[s,c]=(0,y.useState)(``),[l,u]=(0,y.useState)(``),[d,f]=(0,y.useState)(``),p=q({mutationFn:()=>Z.setupAuth({auth_enabled:a,admin_username:a?s:void 0,admin_password:a?l:void 0}),onSuccess:async r=>{await i(),r.auth_enabled?r.admin_created?(n(t(`setup.toast.authEnabledAdminCreated`)),e(`/login`)):(n(t(`setup.toast.authEnabledExistingAdmins`)),e(`/login`)):(n(t(`setup.toast.setupCompleted`)),e(`/`))},onError:e=>{n(e.message,`error`)}});return(0,G.jsx)(`div`,{className:`min-h-screen flex items-center justify-center bg-bambu-dark p-4`,children:(0,G.jsxs)(`div`,{className:`max-w-md w-full space-y-8 p-8 bg-gradient-to-br from-bambu-card to-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary shadow-lg`,children:[(0,G.jsxs)(`div`,{className:`text-center`,children:[(0,G.jsx)(`div`,{className:`flex items-center justify-center mb-6`,children:(0,G.jsx)(`img`,{src:r===`dark`?`/img/bambuddy_logo_dark_transparent.png`:`/img/bambuddy_logo_light.png`,alt:`Bambuddy`,className:`h-16`})}),(0,G.jsx)(`h2`,{className:`text-3xl font-bold text-white`,children:t(`setup.title`)}),(0,G.jsx)(`p`,{className:`mt-2 text-sm text-bambu-gray`,children:t(`setup.subtitle`)})]}),(0,G.jsxs)(`form`,{className:`mt-8 space-y-6`,onSubmit:e=>{if(e.preventDefault(),a&&(s||l)){if(!s||!l){n(t(`setup.toast.enterBothCredentials`),`error`);return}if(l!==d){n(t(`setup.toast.passwordsDoNotMatch`),`error`);return}if(l.length<6){n(t(`setup.toast.passwordTooShort`),`error`);return}}p.mutate()},children:[(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center p-4 bg-bambu-dark-secondary/50 rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`input`,{id:`auth-enabled`,type:`checkbox`,checked:a,onChange:e=>o(e.target.checked),className:`h-4 w-4 text-bambu-green focus:ring-bambu-green border-bambu-dark-tertiary rounded bg-bambu-dark-secondary`}),(0,G.jsx)(`label`,{htmlFor:`auth-enabled`,className:`ml-3 block text-sm font-medium text-white`,children:t(`setup.enableAuth`)})]}),a&&(0,G.jsxs)(`div`,{className:`space-y-4 mt-4`,children:[(0,G.jsx)(`div`,{className:`p-3 bg-bambu-dark-secondary/50 border border-bambu-dark-tertiary rounded-lg`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2`,children:[(0,G.jsx)(Uc,{className:`w-4 h-4 text-bambu-green mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`text-sm text-bambu-gray`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium mb-1`,children:t(`setup.adminAccount`)}),(0,G.jsx)(`p`,{children:t(`setup.adminAccountDesc`)})]})]})}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{htmlFor:`admin-username`,className:`block text-sm font-medium text-white mb-2`,children:[t(`setup.adminUsername`),` `,(0,G.jsx)(`span`,{className:`text-bambu-gray text-xs`,children:t(`setup.optionalIfAdminExists`)})]}),(0,G.jsx)(`input`,{id:`admin-username`,type:`text`,value:s,onChange:e=>c(e.target.value),className:`block w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:t(`setup.adminUsernamePlaceholder`),autoComplete:`username`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{htmlFor:`admin-password`,className:`block text-sm font-medium text-white mb-2`,children:[t(`setup.adminPassword`),` `,(0,G.jsx)(`span`,{className:`text-bambu-gray text-xs`,children:t(`setup.optionalIfAdminExists`)})]}),(0,G.jsx)(`input`,{id:`admin-password`,type:`password`,value:l,onChange:e=>u(e.target.value),className:`block w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:t(`setup.adminPasswordPlaceholder`),minLength:6,autoComplete:`new-password`})]}),l&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`confirm-password`,className:`block text-sm font-medium text-white mb-2`,children:t(`setup.confirmPassword`)}),(0,G.jsx)(`input`,{id:`confirm-password`,type:`password`,value:d,onChange:e=>f(e.target.value),className:`block w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:t(`setup.confirmPasswordPlaceholder`),minLength:6,autoComplete:`new-password`})]})]})]}),(0,G.jsx)(`div`,{children:(0,G.jsx)(`button`,{type:`submit`,disabled:p.isPending,className:`w-full flex justify-center py-3 px-4 bg-bambu-green hover:bg-bambu-green-light text-white font-medium rounded-lg shadow-lg shadow-bambu-green/20 hover:shadow-bambu-green/30 focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:ring-offset-2 focus:ring-offset-bambu-dark-secondary transition-all disabled:opacity-50 disabled:cursor-not-allowed disabled:hover:bg-bambu-green`,children:p.isPending?t(`setup.settingUp`):t(`setup.completeSetup`)})})]})]})})}function T0e(){let{t:e}=U(),{user:t}=jd(),{showToast:n}=Gd(),r=co(),i=or(),[a,o]=(0,y.useState)(!0),[s,c]=(0,y.useState)(!0),[l,u]=(0,y.useState)(!0),[d,f]=(0,y.useState)(!0),[p,m]=(0,y.useState)(!1),{data:h,isLoading:g}=K({queryKey:[`advancedAuthStatus`],queryFn:Z.getAdvancedAuthStatus,staleTime:300*1e3}),{data:_,isLoading:v}=K({queryKey:[`settings`],queryFn:Z.getSettings,staleTime:300*1e3}),{data:b,isLoading:x}=K({queryKey:[`user-email-preferences`],queryFn:()=>Z.getUserEmailPreferences()});(0,y.useEffect)(()=>{(h&&!h.advanced_auth_enabled||_&&!_.user_notifications_enabled)&&i(`/settings`,{replace:!0})},[h,_,i]),(0,y.useEffect)(()=>{b&&(o(b.notify_print_start),c(b.notify_print_complete),u(b.notify_print_failed),f(b.notify_print_stopped),m(!1))},[b]);let S=q({mutationFn:()=>Z.updateUserEmailPreferences({notify_print_start:a,notify_print_complete:s,notify_print_failed:l,notify_print_stopped:d}),onSuccess:()=>{r.invalidateQueries({queryKey:[`user-email-preferences`]}),m(!1),n(e(`notifications.userEmail.saveSuccess`),`success`)},onError:t=>{n(t.message||e(`notifications.userEmail.saveError`),`error`)}}),C=(e,t)=>{e(!t),m(!0)};return x||g||v?(0,G.jsx)(`div`,{className:`flex items-center justify-center h-64`,children:(0,G.jsx)(Y,{className:`w-8 h-8 animate-spin text-bambu-green`})}):(0,G.jsxs)(`div`,{className:`p-4 md:p-6 max-w-2xl mx-auto`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mb-6`,children:[(0,G.jsx)(qo,{className:`w-7 h-7 text-bambu-green`}),(0,G.jsx)(`h1`,{className:`text-2xl font-bold text-white`,children:e(`notifications.userEmail.title`)})]}),(0,G.jsx)(Ld,{className:`mb-6 border-blue-300 bg-blue-50 dark:border-blue-500/30 dark:bg-blue-500/5`,children:(0,G.jsx)(zd,{className:`py-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full flex items-center justify-center bg-blue-100 dark:bg-blue-500/20 flex-shrink-0`,children:(0,G.jsx)(il,{className:`w-5 h-5 text-blue-600 dark:text-blue-400`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-white font-medium`,children:e(`notifications.userEmail.emailNotifications`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:e(`notifications.userEmail.emailNotificationsDesc`)}),t?.email?(0,G.jsxs)(`p`,{className:`text-sm text-blue-700 dark:text-blue-400 mt-2`,children:[e(`notifications.userEmail.sendingTo`),`: `,(0,G.jsx)(`strong`,{children:t.email})]}):(0,G.jsx)(`p`,{className:`text-sm text-yellow-700 dark:text-yellow-400 mt-2`,children:e(`notifications.userEmail.noEmailWarning`)})]})]})})}),(0,G.jsxs)(Ld,{className:`mb-6`,children:[(0,G.jsxs)(Rd,{children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`notifications.userEmail.printJobNotifications`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:e(`notifications.userEmail.printJobNotificationsDesc`)})]}),(0,G.jsxs)(zd,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full flex items-center justify-center ${a?`bg-bambu-green/20`:`bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(Ss,{className:`w-5 h-5 ${a?`text-bambu-green`:`text-bambu-gray`}`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`notifications.userEmail.printJobStarts`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`notifications.userEmail.printJobStartsDesc`)})]})]}),(0,G.jsx)(`button`,{onClick:()=>C(o,a),className:`relative inline-flex h-6 w-11 items-center rounded-full transition-colors focus:outline-none focus:ring-2 focus:ring-bambu-green focus:ring-offset-2 focus:ring-offset-bambu-dark ${a?`bg-bambu-green`:`bg-bambu-dark-tertiary`}`,role:`switch`,"aria-checked":a,children:(0,G.jsx)(`span`,{className:`inline-block h-4 w-4 transform rounded-full bg-white transition-transform ${a?`translate-x-6`:`translate-x-1`}`})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full flex items-center justify-center ${s?`bg-bambu-green/20`:`bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(Ss,{className:`w-5 h-5 ${s?`text-bambu-green`:`text-bambu-gray`}`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`notifications.userEmail.printJobFinishes`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`notifications.userEmail.printJobFinishesDesc`)})]})]}),(0,G.jsx)(`button`,{onClick:()=>C(c,s),className:`relative inline-flex h-6 w-11 items-center rounded-full transition-colors focus:outline-none focus:ring-2 focus:ring-bambu-green focus:ring-offset-2 focus:ring-offset-bambu-dark ${s?`bg-bambu-green`:`bg-bambu-dark-tertiary`}`,role:`switch`,"aria-checked":s,children:(0,G.jsx)(`span`,{className:`inline-block h-4 w-4 transform rounded-full bg-white transition-transform ${s?`translate-x-6`:`translate-x-1`}`})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full flex items-center justify-center ${l?`bg-bambu-green/20`:`bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(Ss,{className:`w-5 h-5 ${l?`text-bambu-green`:`text-bambu-gray`}`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`notifications.userEmail.printErrors`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`notifications.userEmail.printErrorsDesc`)})]})]}),(0,G.jsx)(`button`,{onClick:()=>C(u,l),className:`relative inline-flex h-6 w-11 items-center rounded-full transition-colors focus:outline-none focus:ring-2 focus:ring-bambu-green focus:ring-offset-2 focus:ring-offset-bambu-dark ${l?`bg-bambu-green`:`bg-bambu-dark-tertiary`}`,role:`switch`,"aria-checked":l,children:(0,G.jsx)(`span`,{className:`inline-block h-4 w-4 transform rounded-full bg-white transition-transform ${l?`translate-x-6`:`translate-x-1`}`})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full flex items-center justify-center ${d?`bg-bambu-green/20`:`bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(Ss,{className:`w-5 h-5 ${d?`text-bambu-green`:`text-bambu-gray`}`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`notifications.userEmail.printJobStops`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`notifications.userEmail.printJobStopsDesc`)})]})]}),(0,G.jsx)(`button`,{onClick:()=>C(f,d),className:`relative inline-flex h-6 w-11 items-center rounded-full transition-colors focus:outline-none focus:ring-2 focus:ring-bambu-green focus:ring-offset-2 focus:ring-offset-bambu-dark ${d?`bg-bambu-green`:`bg-bambu-dark-tertiary`}`,role:`switch`,"aria-checked":d,children:(0,G.jsx)(`span`,{className:`inline-block h-4 w-4 transform rounded-full bg-white transition-transform ${d?`translate-x-6`:`translate-x-1`}`})})]})]})]}),(0,G.jsx)(`div`,{className:`flex justify-end`,children:(0,G.jsx)(Q,{onClick:()=>S.mutate(),disabled:!p||S.isPending||!t?.email,children:S.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),e(`common.saving`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Kl,{className:`w-4 h-4`}),e(`common.save`)]})})})]})}function E0e(){let e=or(),[t,n]=Ri(),{t:r}=U(),i=t.get(`archive`),a=t.get(`library_file`),o=t.get(`plate`),s=K({queryKey:[`gcode-viewer-archive-colors`,i],queryFn:()=>Z.getArchiveCapabilities(Number(i)),enabled:!!i,staleTime:5*6e4,retry:!1}),c=K({queryKey:[`gcode-viewer-library-colors`,a],queryFn:()=>Z.getLibraryFilePlates(Number(a)),enabled:!!a,staleTime:5*6e4,retry:!1}),l=K({queryKey:[`gcode-viewer-archive-plates`,i],queryFn:()=>Z.getArchivePlates(Number(i)),enabled:!!i,staleTime:5*6e4,retry:!1}),u=(0,y.useMemo)(()=>(i?l.data?.plates:c.data?.plates)??[],[i,l.data,c.data]),d=(0,y.useMemo)(()=>o?Number(o):u.length===0?null:Math.min(...u.map(e=>e.index)),[o,u]),f=e=>{if(e===d)return;let r=new URLSearchParams(t);r.set(`plate`,String(e)),n(r,{replace:!0})},p=(0,y.useMemo)(()=>{if(i)return s.data?.filament_colors;let e=u.find(e=>e.index===d)||u[0];if(!e?.filaments?.length)return;let t=[];for(let n of e.filaments){let e=Math.max(0,(n.slot_id??1)-1);n.color&&(t[e]=n.color)}return t.length>0?t:void 0},[i,s.data,u,d]),m=(0,y.useMemo)(()=>{let e=e=>o?`${e}?plate=${encodeURIComponent(o)}`:e;return i?e(Z.getArchiveGcode(Number(i))):a?e(Z.getLibraryFileGcodeUrl(Number(a))):null},[i,a,o]),h=()=>{window.history.length>1?e(-1):e(i?`/archives`:`/files`)},g=i?r(`gcodeViewer.backToArchives`,`Back to Archives`):r(`gcodeViewer.backToFiles`,`Back to File Manager`);return(0,G.jsxs)(`div`,{className:`flex flex-col min-h-[calc(100vh-64px)] lg:h-[calc(100vh-64px)]`,children:[(0,G.jsxs)(`div`,{className:`flex-shrink-0 px-4 py-2 border-b border-bambu-dark-tertiary flex flex-wrap items-center gap-x-4 gap-y-2`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:h,className:`inline-flex items-center gap-1.5 text-sm text-gray-700 dark:text-gray-300 hover:text-gray-900 dark:hover:text-white transition-colors`,children:[(0,G.jsx)(Lo,{className:`w-4 h-4`}),g]}),u.length>1&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-1.5`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:r(`gcodeViewer.plates`,`Plates`)}),u.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>f(e.index),"aria-pressed":e.index===d,title:e.name??void 0,className:`px-2 py-0.5 rounded text-xs transition-colors ${e.index===d?`bg-bambu-green text-white`:`bg-bambu-dark-tertiary text-gray-700 dark:text-gray-300 hover:text-gray-900 dark:hover:text-white`}`,children:r(`gcodeViewer.plateN`,`Plate {{n}}`,{n:e.index})},e.index))]})]}),m?(0,G.jsx)(ST,{gcodeUrl:m,filamentColors:p,className:`flex-1 min-h-0`}):(0,G.jsx)(`div`,{className:`flex-1 flex items-center justify-center text-sm text-bambu-gray`,children:r(`gcodeViewer.noSource`,`No file was given to preview.`)})]})}var D0e=4401;function O0e(){let e=(0,y.useRef)(null),t=(0,y.useRef)(null),n=(0,y.useRef)(!1),r=co(),[i,a]=(0,y.useState)(!1),o=(0,y.useRef)(new Map),{showToast:s}=Gd(),{t:c}=U(),l=(0,y.useRef)(new Set),u=(0,y.useRef)(null),d=(0,y.useRef)(new Map),f=(0,y.useRef)(null),p=(0,y.useRef)([]),m=(0,y.useRef)(!1),h=(0,y.useRef)(()=>{}),g=(0,y.useCallback)(()=>{if(m.current||p.current.length===0)return;m.current=!0;let e=()=>{let t=p.current.shift();t?(h.current(t),p.current.length>0?setTimeout(e,16):m.current=!1):m.current=!1};e()},[]),_=(0,y.useCallback)(async()=>{if(n.current||e.current?.readyState===WebSocket.OPEN)return;let r;try{r=(await Z.getWebSocketToken()).token}catch(e){let t=e instanceof od?e.status:0;if(t===401||t===403)return}if(n.current)return;let i=window.location.protocol===`https:`?`wss:`:`ws:`,o=r?`?token=${encodeURIComponent(r)}`:``,s=`${i}//${window.location.host}/api/v1/ws${o}`,c=new WebSocket(s),l=null;c.onopen=()=>{console.log(`[WebSocket] Connected`),a(!0),l=window.setInterval(()=>{c.readyState===WebSocket.OPEN&&c.send(JSON.stringify({type:`ping`}))},3e4)},c.onmessage=e=>{try{let t=JSON.parse(e.data);t.type===`printer_status`&&t.printer_id!==void 0&&t.data?h.current(t):(p.current.push(t),g())}catch{}},c.onclose=r=>{console.log(`[WebSocket] Closed`,r.code,r.reason),l&&=(clearInterval(l),null),a(!1),e.current=null,!(n.current||r.code===D0e)&&(t.current=window.setTimeout(()=>{_()},3e3))},c.onerror=e=>{console.error(`[WebSocket] Error`,e),c.close()},e.current=c},[g]),v=(0,y.useCallback)(()=>{f.current&&=(clearTimeout(f.current),null);let e=new Map(d.current);d.current.clear(),e.forEach((e,t)=>{r.setQueryData([`printerStatus`,t],t=>{let n={...t,...e};return n.wifi_signal==null&&t?.wifi_signal!=null&&(n.wifi_signal=t.wifi_signal),n})})},[r]),b=(0,y.useCallback)((e,t)=>{let n=d.current.get(e)||{};if(d.current.set(e,{...n,...t}),document.hidden){v();return}f.current||=window.setTimeout(v,100)},[v]),x=(0,y.useCallback)(e=>{l.current.add(e),u.current&&clearTimeout(u.current),u.current=window.setTimeout(()=>{let e=Array.from(l.current);l.current.clear(),u.current=null;let t=0;e.forEach(e=>{setTimeout(()=>{r.invalidateQueries({queryKey:[e]})},t),t+=500})},3e3)},[r]),S=(0,y.useCallback)(()=>{r.invalidateQueries({queryKey:[`spool-assignments`]}),r.invalidateQueries({queryKey:[`spoolman-slot-assignments`]}),r.invalidateQueries({queryKey:[`slotPresets`]})},[r]),C=(0,y.useCallback)(e=>{switch(e.type){case`printer_status`:e.printer_id!==void 0&&e.data&&b(e.printer_id,e.data);break;case`print_start`:e.printer_id!==void 0&&r.invalidateQueries({queryKey:[`printerStatus`,e.printer_id]});break;case`missing_spool_assignment`:{if(e.printer_id===void 0||!Array.isArray(e.missing_slots))break;let t=e.missing_slots.map(e=>e&&typeof e.slot==`string`?e.slot:`Unknown`).filter(e=>e.length>0);if(t.length===0){o.current.delete(e.printer_id);break}let n=t.join(`|`);if(o.current.get(e.printer_id)===n)break;o.current.set(e.printer_id,n),s(c(`printers.toast.missingSpoolAssignment`,{printer:e.printer_name||`Printer ${e.printer_id}`,slots:t.join(`, `)}),`warning`);break}case`print_complete`:x(`archives`),x(`archiveStats`);break;case`kill_switch_triggered`:s(c(`printers.toast.killSwitchTriggered`,{printer:e.printer_name||`Printer ${e.printer_id??`?`}`,filename:e.filename||c(`common.unknown`)}),`error`);break;case`billing_charge_failed`:s(c(`printers.toast.billingChargeFailed`,{printer:e.printer_name||`Printer ${e.printer_id??`?`}`,filename:e.filename||c(`common.unknown`)}),`error`);break;case`archive_created`:x(`archives`),x(`archiveStats`);break;case`archive_updated`:x(`archives`);break;case`pong`:break;case`plate_not_empty`:window.dispatchEvent(new CustomEvent(`plate-not-empty`,{detail:{printer_id:e.printer_id,printer_name:e.printer_name,message:e.message}}));break;case`inventory_changed`:x(`inventory-spools`),x(`spoolman-inventory-spools`),x(S8[0]);break;case`spool_assignment_changed`:S();break;case`spool_assignment_verified`:{let t=e.printer_name||`Printer`,n=e.slot||`?`;e.verified?e.kprofile_applied===!1?s(c(`printers.toast.assignmentVerifiedNoKprofile`,{slot:n,printer:t}),`warning`):s(c(`printers.toast.assignmentVerified`,{slot:n,printer:t}),`success`):s(c(`printers.toast.assignmentNotConfirmed`,{slot:n,printer:t}),`warning`);break}case`spool_auto_assigned`:x(`inventory-spools`),S();break;case`spool_usage_logged`:x(`inventory-spools`);break;case`unknown_tag`:{let t=e;window.dispatchEvent(new CustomEvent(`unknown-tag`,{detail:{printer_id:t.printer_id,ams_id:t.ams_id,tray_id:t.tray_id,tag_uid:t.tag_uid,tray_uuid:t.tray_uuid,tray_type:t.tray_type,tray_color:t.tray_color,tray_sub_brands:t.tray_sub_brands,tray_count:t.tray_count}}));break}case`spoolbuddy_weight`:window.dispatchEvent(new CustomEvent(`spoolbuddy-weight`,{detail:e}));break;case`spoolbuddy_tag_matched`:window.dispatchEvent(new CustomEvent(`spoolbuddy-tag-matched`,{detail:e})),x(`inventory-spools`);break;case`spoolbuddy_unknown_tag`:window.dispatchEvent(new CustomEvent(`spoolbuddy-unknown-tag`,{detail:e}));break;case`spoolbuddy_tag_removed`:window.dispatchEvent(new CustomEvent(`spoolbuddy-tag-removed`,{detail:e}));break;case`spoolbuddy_tag_written`:window.dispatchEvent(new CustomEvent(`spoolbuddy-tag-written`,{detail:e})),x(`inventory-spools`);break;case`spoolbuddy_tag_write_failed`:window.dispatchEvent(new CustomEvent(`spoolbuddy-tag-write-failed`,{detail:e}));break;case`spoolbuddy_online`:window.dispatchEvent(new CustomEvent(`spoolbuddy-online`,{detail:e})),x(`spoolbuddy-devices`),x(`spoolbuddy-update-check`);break;case`spoolbuddy_offline`:window.dispatchEvent(new CustomEvent(`spoolbuddy-offline`,{detail:e})),x(`spoolbuddy-devices`);break;case`spoolbuddy_update`:x(`spoolbuddy-devices`),x(`spoolbuddy-update-check`);break;case`queue_item_uploading`:case`queue_item_upload_progress`:case`queue_item_acked`:case`queue_item_failed`:window.dispatchEvent(new CustomEvent(`bambuddy:dispatch-toast`,{detail:e}));break;case`pipeline_run_updated`:r.invalidateQueries({queryKey:[`pipeline-runs-all`]}),e.run?.pipeline_id&&r.invalidateQueries({queryKey:[`pipeline-runs`,e.run.pipeline_id]});break}},[r,x,S,b,s,c]);return(0,y.useEffect)(()=>{h.current=C},[C]),(0,y.useEffect)(()=>(n.current=!1,_(),()=>{n.current=!0,t.current&&clearTimeout(t.current),u.current&&clearTimeout(u.current),f.current&&clearTimeout(f.current),e.current&&e.current.close()}),[_]),{isConnected:i,sendMessage:(0,y.useCallback)(t=>{e.current?.readyState===WebSocket.OPEN&&e.current.send(JSON.stringify(t))},[])}}var k0e=`#00ae42`,A0e=e=>e!=null&&e>0?e:1/0;function j0e(e){let t=null;for(let n of e){if(!n||n.state!==`RUNNING`||n.progress==null)continue;if(t===null){t=n;continue}let e=A0e(n.remaining_time),r=A0e(t.remaining_time);(e<r||e===r&&(n.progress??0)>(t.progress??0))&&(t=n)}return t}function M0e(e){let t=document.createElement(`canvas`);t.width=32,t.height=32;let n=t.getContext(`2d`);if(!n)return null;let r=getComputedStyle(document.documentElement).getPropertyValue(`--accent`).trim()||k0e,i=Math.max(0,Math.min(100,e))/100,a=-Math.PI/2;return n.lineWidth=4,n.beginPath(),n.arc(16,16,13,0,Math.PI*2),n.strokeStyle=`rgba(128,128,128,0.3)`,n.stroke(),n.beginPath(),n.arc(16,16,13,a,a+i*Math.PI*2),n.strokeStyle=r,n.lineCap=`round`,n.stroke(),t.toDataURL(`image/png`)}function B9(e,t){document.querySelectorAll(`link[rel~="icon"]`).forEach(n=>{if(e)t.has(n)||t.set(n,n.href),n.href=e;else{let e=t.get(n);e!==void 0&&(n.href=e)}}),e||t.clear()}function N0e(){let{progressInTitle:e,resolvedMode:t,darkAccent:n,lightAccent:r}=Pd(),i=t===`dark`?n:r,{data:a}=K({queryKey:[`printers`],queryFn:Z.getPrinters,enabled:e}),o=Co({queries:(e?a??[]:[]).map(e=>({queryKey:[`printerStatus`,e.id],queryFn:()=>Z.getPrinterStatus(e.id)}))}),s=(0,y.useRef)(new Map),c=(0,y.useRef)(document.title),l=(0,y.useRef)(!1),u=e?j0e(o.map(e=>e.data)):null,d=u&&u.progress!=null?Math.round(u.progress):null;(0,y.useEffect)(()=>{e&&d!=null?(document.title=`${d}% · ${c.current}`,B9(M0e(d),s.current),l.current=!0):l.current&&=(document.title=c.current,B9(null,s.current),!1)},[e,d,i]),(0,y.useEffect)(()=>{let e=s.current,t=l,n=c.current;return()=>{t.current&&(document.title=n,B9(null,e))}},[])}function P0e({children:e}){let{authEnabled:t,user:n,loading:r}=jd(),{data:i}=K({queryKey:[`color-catalog-map`],queryFn:async()=>{let e=await Z.getColorNameMap();return{colors:e.colors,byMaterial:e.by_material??{}}},staleTime:1/0,gcTime:1/0,retry:2,enabled:!r&&(!t||n!==null)});return(0,y.useEffect)(()=>{i&&gf(i.colors,i.byMaterial)},[i]),(0,G.jsx)(G.Fragment,{children:e})}function F0e({selectedPrinterId:e,onPrinterChange:t,deviceOnline:n}){let{t:r}=U(),[i,a]=(0,y.useState)(new Date),{data:o=[]}=K({queryKey:[`printers`],queryFn:()=>Z.getPrinters()}),s=Co({queries:o.map(e=>({queryKey:[`printerStatus`,e.id],queryFn:()=>Z.getPrinterStatus(e.id),refetchInterval:1e4}))}),c=(0,y.useMemo)(()=>o.filter((e,t)=>s[t]?.data?.connected),[o,s]);(0,y.useEffect)(()=>{let n=c.some(t=>t.id===e);(!e||!n)&&c.length>0&&t(c[0].id)},[c,e,t]);let{data:l}=K({queryKey:[`settings`],queryFn:Z.getSettings});return(0,y.useEffect)(()=>{let e=setInterval(()=>a(new Date),1e3);return()=>clearInterval(e)},[]),(0,G.jsxs)(`div`,{className:`h-12 bg-bambu-dark-secondary border-b border-bambu-dark-tertiary flex items-center px-3 gap-4 shrink-0`,children:[(0,G.jsx)(`div`,{className:`flex items-center shrink-0`,children:(0,G.jsx)(`img`,{src:`/img/spoolbuddy_logo_dark_small.png`,alt:`SpoolBuddy`,width:113,height:28,className:`h-7 w-auto`})}),(0,G.jsx)(`div`,{className:`flex-1 flex justify-center`,children:(0,G.jsx)(`select`,{value:e??``,onChange:e=>t(Number(e.target.value)),className:`bg-bambu-dark text-white text-base px-4 py-2 rounded border border-bambu-dark-tertiary focus:outline-none focus:border-bambu-green min-w-[180px]`,children:c.length===0?(0,G.jsx)(`option`,{value:``,children:r(`spoolbuddy.status.noPrinters`,`No printers online`)}):c.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3 shrink-0`,children:[(0,G.jsx)(`div`,{className:`flex items-center`,title:n?r(`spoolbuddy.status.backend`,`Backend`):r(`spoolbuddy.status.offline`,`Offline`),children:n?(0,G.jsx)(`div`,{className:`flex items-end gap-0.5 h-4`,children:[1,2,3,4].map(e=>(0,G.jsx)(`div`,{className:`w-1 rounded-sm ${e<=4?`bg-white`:`bg-bambu-dark-tertiary`}`,style:{height:`${e*4}px`}},e))}):(0,G.jsx)(Xu,{className:`w-5 h-5 text-red-400`})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(`div`,{className:`w-3 h-3 rounded-full ${n?`bg-bambu-green shadow-[0_0_6px_rgba(34,197,94,0.5)]`:`bg-bambu-gray`}`}),(0,G.jsx)(`span`,{className:`text-sm text-white/50`,children:n?r(`spoolbuddy.status.backend`,`Backend`):r(`spoolbuddy.status.offline`,`Offline`)})]}),(0,G.jsx)(`span`,{className:`text-white/50 text-base font-mono min-w-[50px] text-right`,children:ip(i,l?.time_format||`system`)})]})]})}var I0e=[{to:`/spoolbuddy`,labelKey:`spoolbuddy.nav.dashboard`,fallback:`Dashboard`,icon:(0,G.jsx)(`svg`,{className:`w-6 h-6`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:2,d:`M3 12l2-2m0 0l7-7 7 7M5 10v10a1 1 0 001 1h3m10-11l2 2m-2-2v10a1 1 0 01-1 1h-3m-6 0a1 1 0 001-1v-4a1 1 0 011-1h2a1 1 0 011 1v4a1 1 0 001 1m-6 0h6`})})},{to:`/spoolbuddy/ams`,labelKey:`spoolbuddy.nav.ams`,fallback:`AMS`,icon:(0,G.jsx)(`svg`,{className:`w-6 h-6`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:2,d:`M19 11H5m14 0a2 2 0 012 2v6a2 2 0 01-2 2H5a2 2 0 01-2-2v-6a2 2 0 012-2m14 0V9a2 2 0 00-2-2M5 11V9a2 2 0 012-2m0 0V5a2 2 0 012-2h6a2 2 0 012 2v2M7 7h10`})})},{to:`/spoolbuddy/write-tag`,labelKey:`spoolbuddy.nav.writeTag`,fallback:`Write`,icon:(0,G.jsxs)(`svg`,{className:`w-6 h-6`,viewBox:`0 0 24 24`,fill:`none`,stroke:`currentColor`,strokeWidth:2,children:[(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,d:`M8.288 15.038a5.25 5.25 0 017.424 0M5.106 11.856c3.807-3.808 9.98-3.808 13.788 0M1.924 8.674c5.565-5.565 14.587-5.565 20.152 0`}),(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,d:`M12.53 18.22l-.53.53-.53-.53a.75.75 0 011.06 0z`})]})},{to:`/spoolbuddy/inventory`,labelKey:`spoolbuddy.nav.inventory`,fallback:`Inventory`,icon:(0,G.jsx)(`svg`,{className:`w-6 h-6`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:2,d:`M20 7l-8-4-8 4m16 0l-8 4m8-4v10l-8 4m0-10L4 7m8 4v10M4 7v10l8 4`})})},{to:`/spoolbuddy/settings`,labelKey:`spoolbuddy.nav.settings`,fallback:`Settings`,icon:(0,G.jsxs)(`svg`,{className:`w-6 h-6`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:[(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:2,d:`M10.325 4.317c.426-1.756 2.924-1.756 3.35 0a1.724 1.724 0 002.573 1.066c1.543-.94 3.31.826 2.37 2.37a1.724 1.724 0 001.066 2.573c1.756.426 1.756 2.924 0 3.35a1.724 1.724 0 00-1.066 2.573c.94 1.543-.826 3.31-2.37 2.37a1.724 1.724 0 00-2.573 1.066c-.426 1.756-2.924 1.756-3.35 0a1.724 1.724 0 00-2.573-1.066c-1.543.94-3.31-.826-2.37-2.37a1.724 1.724 0 00-1.066-2.573c-1.756-.426-1.756-2.924 0-3.35a1.724 1.724 0 001.066-2.573c-.94-1.543.826-3.31 2.37-2.37.996.608 2.296.07 2.572-1.065z`}),(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:2,d:`M15 12a3 3 0 11-6 0 3 3 0 016 0z`})]})}];function L0e(){let{t:e}=U();return(0,G.jsx)(`nav`,{className:`h-14 bg-bambu-dark-secondary border-t border-bambu-dark-tertiary flex items-stretch shrink-0`,children:I0e.map(t=>(0,G.jsxs)(ji,{to:t.to,end:t.to===`/spoolbuddy`,className:({isActive:e})=>`flex-1 flex flex-col items-center justify-center gap-1 transition-colors ${e?`text-bambu-green bg-bambu-dark`:`text-white/50 hover:text-white/70 hover:bg-bambu-dark-tertiary`}`,children:[t.icon,(0,G.jsx)(`span`,{className:`text-xs font-medium`,children:e(t.labelKey,t.fallback)})]},t.to))})}function R0e({alert:e}){let{t}=U(),n=e?e.type===`error`?`bg-red-500`:e.type===`warning`?`bg-amber-500`:`bg-bambu-green`:`bg-bambu-green`;return(0,G.jsxs)(`div`,{className:`h-9 bg-bambu-dark-secondary border-t-2 ${e?e.type===`error`?`border-red-500`:e.type===`warning`?`border-amber-500`:`border-bambu-dark-tertiary`:`border-bambu-dark-tertiary`} flex items-center px-3 gap-3 shrink-0`,children:[(0,G.jsx)(`div`,{className:`w-3.5 h-3.5 rounded-full ${n}`}),(0,G.jsx)(`div`,{className:`flex-1 text-sm text-white/50 truncate`,children:e?(0,G.jsx)(`span`,{children:e.message}):(0,G.jsx)(`span`,{className:`text-bambu-green`,children:t(`spoolbuddy.status.systemReady`,`System Ready`)})})]})}function z0e({isOpen:e,onClose:t,deviceId:n,deviceOnline:r}){let{t:i}=U(),[a,o]=(0,y.useState)(null),[s,c]=(0,y.useState)(!1),[l,u]=(0,y.useState)(new Map),{data:d=[]}=K({queryKey:[`printers`],queryFn:()=>Z.getPrinters(),enabled:e}),{data:f=[]}=K({queryKey:[`smart-plugs`],queryFn:()=>Z.getSmartPlugs(),enabled:e}),p=d.map(e=>{let t=f.find(t=>t.printer_id===e.id&&t.plug_type!==`mqtt`&&t.enabled);if(!t)return null;let n=l.get(t.id);return{plug:t,printer:e,status:n?{state:n.state,reachable:!0,device_name:null,energy:null}:null,loading:n?.loading??!1}}).filter(Boolean);(0,y.useEffect)(()=>{!e||f.length===0||f.filter(e=>e.printer_id!==null&&e.plug_type!==`mqtt`&&e.enabled).forEach(async e=>{try{let t=await Z.getSmartPlugStatus(e.id);u(n=>{let r=new Map(n);return r.set(e.id,{loading:!1,state:t.state}),r})}catch{u(t=>{let n=new Map(t);return n.set(e.id,{loading:!1,state:null}),n})}})},[e,f]),(0,y.useEffect)(()=>{e||(o(null),c(!1))},[e]);let m=(0,y.useCallback)(async e=>{u(t=>{let n=new Map(t),r=n.get(e.id);return n.set(e.id,{loading:!0,state:r?.state??null}),n});try{await Z.controlSmartPlug(e.id,`toggle`);let t=await Z.getSmartPlugStatus(e.id);u(n=>{let r=new Map(n);return r.set(e.id,{loading:!1,state:t.state}),r})}catch{u(t=>{let n=new Map(t),r=n.get(e.id);return n.set(e.id,{loading:!1,state:r?.state??null}),n})}},[]),h=(0,y.useCallback)(async e=>{if(n){c(!0);try{await Dd.systemCommand(n,e),setTimeout(()=>t(),500)}catch{c(!1)}}},[n,t]),g=(0,y.useCallback)(()=>{a&&(a.type===`system`?h(a.command):m(a.plug),o(null))},[a,h,m]);if(!e)return null;let _=e=>e===`ON`||e===`on`;return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-40 bg-black/50`,onPointerDown:t}),(0,G.jsxs)(`div`,{className:`fixed top-0 left-0 right-0 z-50 bg-bambu-dark-secondary border-b border-bambu-dark-tertiary rounded-b-2xl shadow-2xl animate-slide-down`,children:[(0,G.jsx)(`div`,{className:`flex justify-center pt-2 pb-1`,children:(0,G.jsx)(`div`,{className:`w-10 h-1 rounded-full bg-zinc-600`})}),(0,G.jsxs)(`div`,{className:`px-4 pb-4 max-h-[80vh] overflow-y-auto`,children:[p.length>0&&(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsx)(`h3`,{className:`text-xs font-semibold text-zinc-500 uppercase tracking-wide mb-2`,children:i(`spoolbuddy.quickMenu.printerPower`,`Printer Power`)}),(0,G.jsx)(`div`,{className:`space-y-1`,children:p.map(({plug:e,printer:t,loading:n})=>{let r=l.get(e.id),i=_(r?.state??null);return(0,G.jsxs)(`button`,{onClick:()=>o({type:`plug`,plug:e,printer:t,currentState:r?.state??null}),disabled:n,className:`w-full flex items-center gap-2 px-3 py-1.5 rounded-lg bg-zinc-800/60 hover:bg-zinc-700/60 transition-colors min-h-[36px]`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full shrink-0 ${i?`bg-green-500`:`bg-zinc-600`}`}),n&&(0,G.jsx)(Y,{className:`w-3 h-3 animate-spin text-zinc-400 shrink-0`}),(0,G.jsx)(`span`,{className:`flex-1 text-sm text-zinc-200 text-left truncate`,children:t.name}),(0,G.jsx)(`span`,{className:`text-xs font-medium ${i?`text-green-400`:`text-zinc-500`}`,children:r?.state??`—`})]},e.id)})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-xs font-semibold text-zinc-500 uppercase tracking-wide mb-2`,children:i(`spoolbuddy.quickMenu.systemControls`,`System`)}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2`,children:[(0,G.jsx)(V9,{icon:(0,G.jsx)(Wl,{className:`w-4 h-4`}),label:i(`spoolbuddy.quickMenu.restartDaemon`,`Restart Daemon`),onClick:()=>o({type:`system`,command:`restart_daemon`}),disabled:!n||!r||s}),(0,G.jsx)(V9,{icon:(0,G.jsx)(hl,{className:`w-4 h-4`}),label:i(`spoolbuddy.quickMenu.restartBrowser`,`Restart Browser`),onClick:()=>o({type:`system`,command:`restart_browser`}),disabled:!n||!r||s}),(0,G.jsx)(V9,{icon:(0,G.jsx)(Wl,{className:`w-4 h-4`}),label:i(`spoolbuddy.quickMenu.reboot`,`Reboot`),onClick:()=>o({type:`system`,command:`reboot`}),disabled:!n||!r||s,variant:`warning`}),(0,G.jsx)(V9,{icon:(0,G.jsx)(Fl,{className:`w-4 h-4`}),label:i(`spoolbuddy.quickMenu.shutdown`,`Shutdown`),onClick:()=>o({type:`system`,command:`shutdown`}),disabled:!n||!r||s,variant:`danger`})]})]}),(0,G.jsx)(`div`,{className:`flex justify-center mt-3`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-1 text-xs text-zinc-600`,children:[(0,G.jsx)(ps,{className:`w-3 h-3`}),(0,G.jsx)(`span`,{children:i(`spoolbuddy.quickMenu.swipeToClose`,`Swipe down to close`)})]})})]})]}),a&&(0,G.jsx)(`div`,{className:`fixed inset-0 z-[60] flex items-center justify-center bg-black/60`,children:(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-2xl p-5 mx-4 max-w-sm w-full border border-zinc-700`,children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-zinc-100 mb-2`,children:i(`spoolbuddy.quickMenu.confirmTitle`,`Confirm`)}),(0,G.jsx)(`p`,{className:`text-sm text-zinc-400 mb-5`,children:a.type===`plug`?_(a.currentState)?i(`spoolbuddy.quickMenu.confirmPlugOff`,`Turn off {{name}}?`,{name:a.printer.name}):i(`spoolbuddy.quickMenu.confirmPlugOn`,`Turn on {{name}}?`,{name:a.printer.name}):a.command===`shutdown`?i(`spoolbuddy.quickMenu.confirmShutdown`,`Are you sure you want to shut down the SpoolBuddy? You will need physical access to turn it back on.`):a.command===`reboot`?i(`spoolbuddy.quickMenu.confirmReboot`,`Are you sure you want to reboot the SpoolBuddy?`):a.command===`restart_daemon`?i(`spoolbuddy.quickMenu.confirmRestartDaemon`,`Restart the SpoolBuddy daemon? NFC and scale will be temporarily unavailable.`):i(`spoolbuddy.quickMenu.confirmRestartBrowser`,`Restart the kiosk browser? The display will briefly go blank.`)}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(`button`,{onClick:()=>o(null),className:`flex-1 px-4 py-2.5 rounded-lg text-sm font-medium bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors min-h-[44px]`,children:i(`common.cancel`,`Cancel`)}),(0,G.jsx)(`button`,{onClick:g,disabled:s,className:`flex-1 px-4 py-2.5 rounded-lg text-sm font-medium text-white transition-colors min-h-[44px] ${a.type===`plug`?_(a.currentState)?`bg-red-600 hover:bg-red-700`:`bg-green-600 hover:bg-green-700`:a.command===`shutdown`?`bg-red-600 hover:bg-red-700`:a.command===`reboot`?`bg-amber-600 hover:bg-amber-700`:`bg-blue-600 hover:bg-blue-700`} disabled:opacity-50`,children:s?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin mx-auto`}):a.type===`plug`?_(a.currentState)?i(`spoolbuddy.quickMenu.turnOff`,`Turn Off`):i(`spoolbuddy.quickMenu.turnOn`,`Turn On`):i(`spoolbuddy.quickMenu.confirm`,`Confirm`)})]})]})})]})}function V9({icon:e,label:t,onClick:n,disabled:r,variant:i=`default`}){return(0,G.jsxs)(`button`,{onClick:n,disabled:r,className:`flex items-center gap-2.5 p-3 rounded-xl transition-colors min-h-[48px] disabled:opacity-40 ${{default:`bg-zinc-800/60 hover:bg-zinc-700/60 text-zinc-300`,warning:`bg-amber-900/30 hover:bg-amber-900/50 text-amber-400`,danger:`bg-red-900/30 hover:bg-red-900/50 text-red-400`}[i]}`,children:[e,(0,G.jsx)(`span`,{className:`text-sm font-medium`,children:t})]})}var B0e={weight:null,weightStable:!1,rawAdc:null,matchedSpool:null,unknownTagUid:null,unknownTrayUuid:null,deviceOnline:!1,deviceId:null};function V0e(e,t){switch(t.type){case`WEIGHT_UPDATE`:return{...e,weight:t.weight,weightStable:t.stable,rawAdc:t.rawAdc,deviceId:t.deviceId,deviceOnline:!0};case`TAG_MATCHED`:return{...e,matchedSpool:t.spool,unknownTagUid:null,unknownTrayUuid:null,deviceId:t.deviceId};case`UNKNOWN_TAG`:return{...e,matchedSpool:null,unknownTagUid:t.tagUid,unknownTrayUuid:t.trayUuid??null,deviceId:t.deviceId};case`TAG_REMOVED`:return{...e,matchedSpool:null,unknownTagUid:null,unknownTrayUuid:null};case`DEVICE_ONLINE`:return{...e,deviceOnline:!0,deviceId:t.deviceId};case`DEVICE_OFFLINE`:return{...e,deviceOnline:!1,weight:null,weightStable:!1,rawAdc:null};default:return e}}function H0e(){let[e,t]=(0,y.useReducer)(V0e,B0e),n=(0,y.useCallback)(e=>{let n=e.detail;t({type:`WEIGHT_UPDATE`,weight:n.weight_grams??n.data?.weight_grams,stable:n.stable??n.data?.stable??!1,rawAdc:n.raw_adc??n.data?.raw_adc??null,deviceId:n.device_id??n.data?.device_id??``})},[]),r=(0,y.useCallback)(e=>{let n=e.detail,r=n.spool??n.data?.spool;r&&t({type:`TAG_MATCHED`,spool:{id:r.id,tag_uid:n.tag_uid??n.data?.tag_uid??``,material:r.material??``,subtype:r.subtype??null,color_name:r.color_name??null,color_name_is_synthesized:r.color_name_is_synthesized??!1,rgba:r.rgba??null,brand:r.brand??null,label_weight:r.label_weight??0,core_weight:r.core_weight??0,weight_used:r.weight_used??0},deviceId:n.device_id??n.data?.device_id??``})},[]),i=(0,y.useCallback)(e=>{let n=e.detail;t({type:`UNKNOWN_TAG`,tagUid:n.tag_uid??n.data?.tag_uid??``,trayUuid:n.tray_uuid??n.data?.tray_uuid??null,deviceId:n.device_id??n.data?.device_id??``})},[]),a=(0,y.useCallback)(e=>{let n=e.detail;t({type:`TAG_REMOVED`,deviceId:n.device_id??n.data?.device_id??``})},[]),o=(0,y.useCallback)(e=>{let n=e.detail;t({type:`DEVICE_ONLINE`,deviceId:n.device_id??n.data?.device_id??``})},[]),s=(0,y.useCallback)(e=>{let n=e.detail;t({type:`DEVICE_OFFLINE`,deviceId:n.device_id??n.data?.device_id??``})},[]);(0,y.useEffect)(()=>(window.addEventListener(`spoolbuddy-weight`,n),window.addEventListener(`spoolbuddy-tag-matched`,r),window.addEventListener(`spoolbuddy-unknown-tag`,i),window.addEventListener(`spoolbuddy-tag-removed`,a),window.addEventListener(`spoolbuddy-online`,o),window.addEventListener(`spoolbuddy-offline`,s),()=>{window.removeEventListener(`spoolbuddy-weight`,n),window.removeEventListener(`spoolbuddy-tag-matched`,r),window.removeEventListener(`spoolbuddy-unknown-tag`,i),window.removeEventListener(`spoolbuddy-tag-removed`,a),window.removeEventListener(`spoolbuddy-online`,o),window.removeEventListener(`spoolbuddy-offline`,s)}),[n,r,i,a,o,s]);let c=e.matchedSpool?Math.max(0,e.matchedSpool.label_weight-e.matchedSpool.weight_used):null,l=e.weight!==null&&e.matchedSpool?Math.max(0,e.weight-e.matchedSpool.core_weight):null;return{...e,remainingWeight:c,netWeight:l}}var U0e=l(o(((e,t)=>{(function(n,r){typeof e==`object`&&typeof t==`object`?t.exports=r(f()):typeof define==`function`&&define.amd?define([`react`],r):typeof e==`object`?e.ReactSimpleKeyboard=r(f()):n.ReactSimpleKeyboard=r(n.React)})(e,(function(e){return function(){var t={981:function(){typeof Element>`u`||`remove`in Element.prototype||(Element.prototype.remove=function(){this.parentNode&&this.parentNode.removeChild(this)}),typeof self<`u`&&`document`in self&&((!(`classList`in document.createElement(`_`))||document.createElementNS&&!(`classList`in document.createElementNS(`http://www.w3.org/2000/svg`,`g`)))&&function(e){if(`Element`in e){var t=`classList`,n=`prototype`,r=e.Element[n],i=Object,a=String[n].trim||function(){return this.replace(/^\s+|\s+$/g,``)},o=Array[n].indexOf||function(e){for(var t=0,n=this.length;t<n;t++)if(t in this&&this[t]===e)return t;return-1},s=function(e,t){this.name=e,this.code=DOMException[e],this.message=t},c=function(e,t){if(t===``)throw new s(`SYNTAX_ERR`,`The token must not be empty.`);if(/\s/.test(t))throw new s(`INVALID_CHARACTER_ERR`,`The token must not contain space characters.`);return o.call(e,t)},l=function(e){for(var t=a.call(e.getAttribute(`class`)||``),n=t?t.split(/\s+/):[],r=0,i=n.length;r<i;r++)this.push(n[r]);this._updateClassName=function(){e.setAttribute(`class`,this.toString())}},u=l[n]=[],d=function(){return new l(this)};if(s[n]=Error[n],u.item=function(e){return this[e]||null},u.contains=function(e){return~c(this,e+``)},u.add=function(){var e,t=arguments,n=0,r=t.length,i=!1;do~c(this,e=t[n]+``)||(this.push(e),i=!0);while(++n<r);i&&this._updateClassName()},u.remove=function(){var e,t,n=arguments,r=0,i=n.length,a=!1;do for(t=c(this,e=n[r]+``);~t;)this.splice(t,1),a=!0,t=c(this,e);while(++r<i);a&&this._updateClassName()},u.toggle=function(e,t){var n=this.contains(e),r=n?!0!==t&&`remove`:!1!==t&&`add`;return r&&this[r](e),!0===t||!1===t?t:!n},u.replace=function(e,t){var n=c(e+``);~n&&(this.splice(n,1,t),this._updateClassName())},u.toString=function(){return this.join(` `)},i.defineProperty){var f={get:d,enumerable:!0,configurable:!0};try{i.defineProperty(r,t,f)}catch(e){e.number!==void 0&&e.number!==-2146823252||(f.enumerable=!1,i.defineProperty(r,t,f))}}else i[n].__defineGetter__&&r.__defineGetter__(t,d)}}(self),function(){var e=document.createElement(`_`);if(e.classList.add(`c1`,`c2`),!e.classList.contains(`c2`)){var t=function(e){var t=DOMTokenList.prototype[e];DOMTokenList.prototype[e]=function(e){var n,r=arguments.length;for(n=0;n<r;n++)e=arguments[n],t.call(this,e)}};t(`add`),t(`remove`)}if(e.classList.toggle(`c3`,!1),e.classList.contains(`c3`)){var n=DOMTokenList.prototype.toggle;DOMTokenList.prototype.toggle=function(e,t){return 1 in arguments&&!this.contains(e)==!t?t:n.call(this,e)}}`replace`in document.createElement(`_`).classList||(DOMTokenList.prototype.replace=function(e,t){var n=this.toString().split(` `),r=n.indexOf(e+``);~r&&(n=n.slice(r),this.remove.apply(this,n),this.add(t),this.add.apply(this,n.slice(1)))}),e=null}())},548:function(e){e.exports=function(){var e={9306:function(e,t,n){var r=n(4901),i=n(6823),a=TypeError;e.exports=function(e){if(r(e))return e;throw new a(i(e)+` is not a function`)}},5548:function(e,t,n){var r=n(3517),i=n(6823),a=TypeError;e.exports=function(e){if(r(e))return e;throw new a(i(e)+` is not a constructor`)}},3506:function(e,t,n){var r=n(3925),i=String,a=TypeError;e.exports=function(e){if(r(e))return e;throw new a(`Can't set `+i(e)+` as a prototype`)}},6469:function(e,t,n){var r=n(8227),i=n(2360),a=n(4913).f,o=r(`unscopables`),s=Array.prototype;s[o]===void 0&&a(s,o,{configurable:!0,value:i(null)}),e.exports=function(e){s[o][e]=!0}},7829:function(e,t,n){var r=n(8183).charAt;e.exports=function(e,t,n){return t+(n?r(e,t).length:1)}},8551:function(e,t,n){var r=n(34),i=String,a=TypeError;e.exports=function(e){if(r(e))return e;throw new a(i(e)+` is not an object`)}},235:function(e,t,n){var r=n(9213).forEach;e.exports=n(4598)(`forEach`)?[].forEach:function(e){return r(this,e,arguments.length>1?arguments[1]:void 0)}},7916:function(e,t,n){var r=n(6080),i=n(9565),a=n(8981),o=n(6319),s=n(4209),c=n(3517),l=n(6198),u=n(4659),d=n(4527),f=n(81),p=n(851),m=Array;e.exports=function(e){var t=a(e),n=c(this),h=arguments.length,g=h>1?arguments[1]:void 0,_=g!==void 0;_&&(g=r(g,h>2?arguments[2]:void 0));var v,y,b,x,S,C,w=p(t),T=0;if(!w||this===m&&s(w))for(v=l(t),y=n?new this(v):m(v);v>T;T++)C=_?g(t[T],T):t[T],u(y,T,C);else for(y=n?new this:[],S=(x=f(t,w)).next;!(b=i(S,x)).done;T++)C=_?o(x,g,[b.value,T],!0):b.value,u(y,T,C);return d(y,T),y}},9617:function(e,t,n){var r=n(5397),i=n(5610),a=n(6198),o=function(e){return function(t,n,o){var s=r(t),c=a(s);if(c===0)return!e&&-1;var l,u=i(o,c);if(e&&n!=n){for(;c>u;)if((l=s[u++])!=l)return!0}else for(;c>u;u++)if((e||u in s)&&s[u]===n)return e||u||0;return!e&&-1}};e.exports={includes:o(!0),indexOf:o(!1)}},9213:function(e,t,n){var r=n(6080),i=n(7055),a=n(8981),o=n(6198),s=n(1469),c=n(4659),l=function(e){var t=e===1,n=e===2,l=e===3,u=e===4,d=e===6,f=e===7,p=e===5||d;return function(m,h,g){for(var _,v,y=a(m),b=i(y),x=o(b),S=r(h,g),C=0,w=0,T=t?s(m,x):n||f?s(m,0):void 0;x>C;C++)if((p||C in b)&&(v=S(_=b[C],C,y),e))if(t)c(T,C,v);else if(v)switch(e){case 3:return!0;case 5:return _;case 6:return C;case 2:c(T,w++,_)}else switch(e){case 4:return!1;case 7:c(T,w++,_)}return d?-1:l||u?u:T}};e.exports={forEach:l(0),map:l(1),filter:l(2),some:l(3),every:l(4),find:l(5),findIndex:l(6),filterReject:l(7)}},597:function(e,t,n){var r=n(9039),i=n(8227),a=n(9519),o=i(`species`);e.exports=function(e){return a>=51||!r((function(){var t=[];return(t.constructor={})[o]=function(){return{foo:1}},t[e](Boolean).foo!==1}))}},4598:function(e,t,n){var r=n(9039);e.exports=function(e,t){var n=[][e];return!!n&&r((function(){n.call(null,t||function(){return 1},1)}))}},926:function(e,t,n){var r=n(9306),i=n(8981),a=n(7055),o=n(6198),s=TypeError,c=`Reduce of empty array with no initial value`,l=function(e){return function(t,n,l,u){var d=i(t),f=a(d),p=o(d);if(r(n),p===0&&l<2)throw new s(c);var m=e?p-1:0,h=e?-1:1;if(l<2)for(;;){if(m in f){u=f[m],m+=h;break}if(m+=h,e?m<0:p<=m)throw new s(c)}for(;e?m>=0:p>m;m+=h)m in f&&(u=n(u,f[m],m,d));return u}};e.exports={left:l(!1),right:l(!0)}},4527:function(e,t,n){var r=n(3724),i=n(4376),a=TypeError,o=Object.getOwnPropertyDescriptor;e.exports=r&&!function(){if(this!==void 0)return!0;try{Object.defineProperty([],"length",{writable:!1}).length=1}catch(e){return e instanceof TypeError}}()?function(e,t){if(i(e)&&!o(e,`length`).writable)throw new a(`Cannot set read only .length`);return e.length=t}:function(e,t){return e.length=t}},7680:function(e,t,n){e.exports=n(9504)([].slice)},4488:function(e,t,n){var r=n(7680),i=Math.floor,a=function(e,t){var n=e.length;if(n<8)for(var o,s,c=1;c<n;){for(s=c,o=e[c];s&&t(e[s-1],o)>0;)e[s]=e[--s];s!==c++&&(e[s]=o)}else for(var l=i(n/2),u=a(r(e,0,l),t),d=a(r(e,l),t),f=u.length,p=d.length,m=0,h=0;m<f||h<p;)e[m+h]=m<f&&h<p?t(u[m],d[h])<=0?u[m++]:d[h++]:m<f?u[m++]:d[h++];return e};e.exports=a},7433:function(e,t,n){var r=n(4376),i=n(3517),a=n(34),o=n(8227)(`species`),s=Array;e.exports=function(e){var t;return r(e)&&(t=e.constructor,(i(t)&&(t===s||r(t.prototype))||a(t)&&(t=t[o])===null)&&(t=void 0)),t===void 0?s:t}},1469:function(e,t,n){var r=n(7433);e.exports=function(e,t){return new(r(e))(t===0?0:t)}},6319:function(e,t,n){var r=n(8551),i=n(9539);e.exports=function(e,t,n,a){try{return a?t(r(n)[0],n[1]):t(n)}catch(t){i(e,`throw`,t)}}},4428:function(e,t,n){var r=n(8227)(`iterator`),i=!1;try{var a=0,o={next:function(){return{done:!!a++}},return:function(){i=!0}};o[r]=function(){return this},Array.from(o,(function(){throw 2}))}catch{}e.exports=function(e,t){try{if(!t&&!i)return!1}catch{return!1}var n=!1;try{var a={};a[r]=function(){return{next:function(){return{done:n=!0}}}},e(a)}catch{}return n}},2195:function(e,t,n){var r=n(9504),i=r({}.toString),a=r(``.slice);e.exports=function(e){return a(i(e),8,-1)}},6955:function(e,t,n){var r=n(2140),i=n(4901),a=n(2195),o=n(8227)(`toStringTag`),s=Object,c=a(function(){return arguments}())===`Arguments`;e.exports=r?a:function(e){var t,n,r;return e===void 0?`Undefined`:e===null?`Null`:typeof(n=function(e,t){try{return e[t]}catch{}}(t=s(e),o))==`string`?n:c?a(t):(r=a(t))===`Object`&&i(t.callee)?`Arguments`:r}},7740:function(e,t,n){var r=n(9297),i=n(5031),a=n(7347),o=n(4913);e.exports=function(e,t,n){for(var s=i(t),c=o.f,l=a.f,u=0;u<s.length;u++){var d=s[u];r(e,d)||n&&r(n,d)||c(e,d,l(t,d))}}},1436:function(e,t,n){var r=n(8227)(`match`);e.exports=function(e){var t=/./;try{`/./`[e](t)}catch{try{return t[r]=!1,`/./`[e](t)}catch{}}return!1}},2211:function(e,t,n){e.exports=!n(9039)((function(){function e(){}return e.prototype.constructor=null,Object.getPrototypeOf(new e)!==e.prototype}))},2529:function(e){e.exports=function(e,t){return{value:e,done:t}}},6699:function(e,t,n){var r=n(3724),i=n(4913),a=n(6980);e.exports=r?function(e,t,n){return i.f(e,t,a(1,n))}:function(e,t,n){return e[t]=n,e}},6980:function(e){e.exports=function(e,t){return{enumerable:!(1&e),configurable:!(2&e),writable:!(4&e),value:t}}},4659:function(e,t,n){var r=n(3724),i=n(4913),a=n(6980);e.exports=function(e,t,n){r?i.f(e,t,a(0,n)):e[t]=n}},3640:function(e,t,n){var r=n(8551),i=n(4270),a=TypeError;e.exports=function(e){if(r(this),e===`string`||e==="default")e=`string`;else if(e!==`number`)throw new a(`Incorrect hint`);return i(this,e)}},2106:function(e,t,n){var r=n(283),i=n(4913);e.exports=function(e,t,n){return n.get&&r(n.get,t,{getter:!0}),n.set&&r(n.set,t,{setter:!0}),i.f(e,t,n)}},6840:function(e,t,n){var r=n(4901),i=n(4913),a=n(283),o=n(9433);e.exports=function(e,t,n,s){s||={};var c=s.enumerable,l=s.name===void 0?t:s.name;if(r(n)&&a(n,l,s),s.global)c?e[t]=n:o(t,n);else{try{s.unsafe?e[t]&&(c=!0):delete e[t]}catch{}c?e[t]=n:i.f(e,t,{value:n,enumerable:!1,configurable:!s.nonConfigurable,writable:!s.nonWritable})}return e}},9433:function(e,t,n){var r=n(4576),i=Object.defineProperty;e.exports=function(e,t){try{i(r,e,{value:t,configurable:!0,writable:!0})}catch{r[e]=t}return t}},4606:function(e,t,n){var r=n(6823),i=TypeError;e.exports=function(e,t){if(!delete e[t])throw new i(`Cannot delete property `+r(t)+` of `+r(e))}},3724:function(e,t,n){e.exports=!n(9039)((function(){return Object.defineProperty({},1,{get:function(){return 7}})[1]!==7}))},4055:function(e,t,n){var r=n(4576),i=n(34),a=r.document,o=i(a)&&i(a.createElement);e.exports=function(e){return o?a.createElement(e):{}}},6837:function(e){var t=TypeError;e.exports=function(e){if(e>9007199254740991)throw t(`Maximum allowed index exceeded`);return e}},7400:function(e){e.exports={CSSRuleList:0,CSSStyleDeclaration:0,CSSValueList:0,ClientRectList:0,DOMRectList:0,DOMStringList:0,DOMTokenList:1,DataTransferItemList:0,FileList:0,HTMLAllCollection:0,HTMLCollection:0,HTMLFormElement:0,HTMLSelectElement:0,MediaList:0,MimeTypeArray:0,NamedNodeMap:0,NodeList:1,PaintRequestList:0,Plugin:0,PluginArray:0,SVGLengthList:0,SVGNumberList:0,SVGPathSegList:0,SVGPointList:0,SVGStringList:0,SVGTransformList:0,SourceBufferList:0,StyleSheetList:0,TextTrackCueList:0,TextTrackList:0,TouchList:0}},9296:function(e,t,n){var r=n(4055)(`span`).classList,i=r&&r.constructor&&r.constructor.prototype;e.exports=i===Object.prototype?void 0:i},8727:function(e){e.exports=[`constructor`,`hasOwnProperty`,`isPrototypeOf`,`propertyIsEnumerable`,`toLocaleString`,`toString`,`valueOf`]},3709:function(e,t,n){var r=n(2839).match(/firefox\/(\d+)/i);e.exports=!!r&&+r[1]},3763:function(e,t,n){var r=n(2839);e.exports=/MSIE|Trident/.test(r)},6193:function(e,t,n){e.exports=n(4215)===`NODE`},2839:function(e,t,n){var r=n(4576).navigator,i=r&&r.userAgent;e.exports=i?String(i):``},9519:function(e,t,n){var r,i,a=n(4576),o=n(2839),s=a.process,c=a.Deno,l=s&&s.versions||c&&c.version,u=l&&l.v8;u&&(i=(r=u.split(`.`))[0]>0&&r[0]<4?1:+(r[0]+r[1])),!i&&o&&(!(r=o.match(/Edge\/(\d+)/))||r[1]>=74)&&(r=o.match(/Chrome\/(\d+)/))&&(i=+r[1]),e.exports=i},3607:function(e,t,n){var r=n(2839).match(/AppleWebKit\/(\d+)\./);e.exports=!!r&&+r[1]},4215:function(e,t,n){var r=n(4576),i=n(2839),a=n(2195),o=function(e){return i.slice(0,e.length)===e};e.exports=o(`Bun/`)?`BUN`:o(`Cloudflare-Workers`)?`CLOUDFLARE`:o(`Deno/`)?`DENO`:o(`Node.js/`)?`NODE`:r.Bun&&typeof Bun.version==`string`?`BUN`:r.Deno&&typeof Deno.version==`object`?`DENO`:a(r.process)===`process`?`NODE`:r.window&&r.document?`BROWSER`:`REST`},6518:function(e,t,n){var r=n(4576),i=n(7347).f,a=n(6699),o=n(6840),s=n(9433),c=n(7740),l=n(2796);e.exports=function(e,t){var n,u,d,f,p,m=e.target,h=e.global,g=e.stat;if(n=h?r:g?r[m]||s(m,{}):r[m]&&r[m].prototype)for(u in t){if(f=t[u],d=e.dontCallGetSet?(p=i(n,u))&&p.value:n[u],!l(h?u:m+(g?`.`:`#`)+u,e.forced)&&d!==void 0){if(typeof f==typeof d)continue;c(f,d)}(e.sham||d&&d.sham)&&a(f,`sham`,!0),o(n,u,f,e)}}},9039:function(e){e.exports=function(e){try{return!!e()}catch{return!0}}},9228:function(e,t,n){n(7495);var r=n(9565),i=n(6840),a=n(7323),o=n(9039),s=n(8227),c=n(6699),l=s(`species`),u=RegExp.prototype;e.exports=function(e,t,n,d){var f=s(e),p=!o((function(){var t={};return t[f]=function(){return 7},``[e](t)!==7})),m=p&&!o((function(){var t=!1,n=/a/;if(e===`split`){var r={};r[l]=function(){return n},(n={constructor:r,flags:``})[f]=/./[f]}return n.exec=function(){return t=!0,null},n[f](``),!t}));if(!p||!m||n){var h=/./[f],g=t(f,``[e],(function(e,t,n,i,o){var s=t.exec;return s===a||s===u.exec?p&&!o?{done:!0,value:r(h,t,n,i)}:{done:!0,value:r(e,n,t,i)}:{done:!1}}));i(String.prototype,e,g[0]),i(u,f,g[1])}d&&c(u[f],`sham`,!0)}},8745:function(e,t,n){var r=n(616),i=Function.prototype,a=i.apply,o=i.call;e.exports=typeof Reflect==`object`&&Reflect.apply||(r?o.bind(a):function(){return o.apply(a,arguments)})},6080:function(e,t,n){var r=n(7476),i=n(9306),a=n(616),o=r(r.bind);e.exports=function(e,t){return i(e),t===void 0?e:a?o(e,t):function(){return e.apply(t,arguments)}}},616:function(e,t,n){e.exports=!n(9039)((function(){var e=function(){}.bind();return typeof e!=`function`||e.hasOwnProperty(`prototype`)}))},566:function(e,t,n){var r=n(9504),i=n(9306),a=n(34),o=n(9297),s=n(7680),c=n(616),l=Function,u=r([].concat),d=r([].join),f={};e.exports=c?l.bind:function(e){var t=i(this),n=t.prototype,r=s(arguments,1),c=function(){var n=u(r,s(arguments));return this instanceof c?function(e,t,n){if(!o(f,t)){for(var r=[],i=0;i<t;i++)r[i]=`a[`+i+`]`;f[t]=l(`C,a`,`return new C(`+d(r,`,`)+`)`)}return f[t](e,n)}(t,n.length,n):t.apply(e,n)};return a(n)&&(c.prototype=n),c}},9565:function(e,t,n){var r=n(616),i=Function.prototype.call;e.exports=r?i.bind(i):function(){return i.apply(i,arguments)}},350:function(e,t,n){var r=n(3724),i=n(9297),a=Function.prototype,o=r&&Object.getOwnPropertyDescriptor,s=i(a,`name`);e.exports={EXISTS:s,PROPER:s&&function(){}.name===`something`,CONFIGURABLE:s&&(!r||r&&o(a,`name`).configurable)}},6706:function(e,t,n){var r=n(9504),i=n(9306);e.exports=function(e,t,n){try{return r(i(Object.getOwnPropertyDescriptor(e,t)[n]))}catch{}}},7476:function(e,t,n){var r=n(2195),i=n(9504);e.exports=function(e){if(r(e)===`Function`)return i(e)}},9504:function(e,t,n){var r=n(616),i=Function.prototype,a=i.call,o=r&&i.bind.bind(a,a);e.exports=r?o:function(e){return function(){return a.apply(e,arguments)}}},7751:function(e,t,n){var r=n(4576),i=n(4901);e.exports=function(e,t){return arguments.length<2?(n=r[e],i(n)?n:void 0):r[e]&&r[e][t];var n}},851:function(e,t,n){var r=n(6955),i=n(5966),a=n(4117),o=n(6269),s=n(8227)(`iterator`);e.exports=function(e){if(!a(e))return i(e,s)||i(e,`@@iterator`)||o[r(e)]}},81:function(e,t,n){var r=n(9565),i=n(9306),a=n(8551),o=n(6823),s=n(851),c=TypeError;e.exports=function(e,t){var n=arguments.length<2?s(e):t;if(i(n))return a(r(n,e));throw new c(o(e)+` is not iterable`)}},5966:function(e,t,n){var r=n(9306),i=n(4117);e.exports=function(e,t){var n=e[t];return i(n)?void 0:r(n)}},2478:function(e,t,n){var r=n(9504),i=n(8981),a=Math.floor,o=r(``.charAt),s=r(``.replace),c=r(``.slice),l=/\$([$&'`]|\d{1,2}|<[^>]*>)/g,u=/\$([$&'`]|\d{1,2})/g;e.exports=function(e,t,n,r,d,f){var p=n+e.length,m=r.length,h=u;return d!==void 0&&(d=i(d),h=l),s(f,h,(function(i,s){var l;switch(o(s,0)){case`$`:return`$`;case`&`:return e;case"`":return c(t,0,n);case`'`:return c(t,p);case`<`:l=d[c(s,1,-1)];break;default:var u=+s;if(u===0)return i;if(u>m){var f=a(u/10);return f===0?i:f<=m?r[f-1]===void 0?o(s,1):r[f-1]+o(s,1):i}l=r[u-1]}return l===void 0?``:l}))}},4576:function(e,t,n){var r=function(e){return e&&e.Math===Math&&e};e.exports=r(typeof globalThis==`object`&&globalThis)||r(typeof window==`object`&&window)||r(typeof self==`object`&&self)||r(typeof n.g==`object`&&n.g)||r(typeof this==`object`&&this)||function(){return this}()||Function(`return this`)()},9297:function(e,t,n){var r=n(9504),i=n(8981),a=r({}.hasOwnProperty);e.exports=Object.hasOwn||function(e,t){return a(i(e),t)}},421:function(e){e.exports={}},397:function(e,t,n){e.exports=n(7751)(`document`,`documentElement`)},5917:function(e,t,n){var r=n(3724),i=n(9039),a=n(4055);e.exports=!r&&!i((function(){return Object.defineProperty(a(`div`),"a",{get:function(){return 7}}).a!==7}))},7055:function(e,t,n){var r=n(9504),i=n(9039),a=n(2195),o=Object,s=r(``.split);e.exports=i((function(){return!o(`z`).propertyIsEnumerable(0)}))?function(e){return a(e)===`String`?s(e,``):o(e)}:o},3167:function(e,t,n){var r=n(4901),i=n(34),a=n(2967);e.exports=function(e,t,n){var o,s;return a&&r(o=t.constructor)&&o!==n&&i(s=o.prototype)&&s!==n.prototype&&a(e,s),e}},3706:function(e,t,n){var r=n(9504),i=n(4901),a=n(7629),o=r(Function.toString);i(a.inspectSource)||(a.inspectSource=function(e){return o(e)}),e.exports=a.inspectSource},1181:function(e,t,n){var r,i,a,o=n(8622),s=n(4576),c=n(34),l=n(6699),u=n(9297),d=n(7629),f=n(6119),p=n(421),m=`Object already initialized`,h=s.TypeError,g=s.WeakMap;if(o||d.state){var _=d.state||=new g;_.get=_.get,_.has=_.has,_.set=_.set,r=function(e,t){if(_.has(e))throw new h(m);return t.facade=e,_.set(e,t),t},i=function(e){return _.get(e)||{}},a=function(e){return _.has(e)}}else{var v=f(`state`);p[v]=!0,r=function(e,t){if(u(e,v))throw new h(m);return t.facade=e,l(e,v,t),t},i=function(e){return u(e,v)?e[v]:{}},a=function(e){return u(e,v)}}e.exports={set:r,get:i,has:a,enforce:function(e){return a(e)?i(e):r(e,{})},getterFor:function(e){return function(t){var n;if(!c(t)||(n=i(t)).type!==e)throw new h(`Incompatible receiver, `+e+` required`);return n}}}},4209:function(e,t,n){var r=n(8227),i=n(6269),a=r(`iterator`),o=Array.prototype;e.exports=function(e){return e!==void 0&&(i.Array===e||o[a]===e)}},4376:function(e,t,n){var r=n(2195);e.exports=Array.isArray||function(e){return r(e)===`Array`}},4901:function(e){var t=typeof document==`object`&&document.all;e.exports=t===void 0&&t!==void 0?function(e){return typeof e==`function`||e===t}:function(e){return typeof e==`function`}},3517:function(e,t,n){var r=n(9504),i=n(9039),a=n(4901),o=n(6955),s=n(7751),c=n(3706),l=function(){},u=s(`Reflect`,`construct`),d=/^\s*(?:class|function)\b/,f=r(d.exec),p=!d.test(l),m=function(e){if(!a(e))return!1;try{return u(l,[],e),!0}catch{return!1}},h=function(e){if(!a(e))return!1;switch(o(e)){case`AsyncFunction`:case`GeneratorFunction`:case`AsyncGeneratorFunction`:return!1}try{return p||!!f(d,c(e))}catch{return!0}};h.sham=!0,e.exports=!u||i((function(){var e;return m(m.call)||!m(Object)||!m((function(){e=!0}))||e}))?h:m},2796:function(e,t,n){var r=n(9039),i=n(4901),a=/#|\.prototype\./,o=function(e,t){var n=c[s(e)];return n===u||n!==l&&(i(t)?r(t):!!t)},s=o.normalize=function(e){return String(e).replace(a,`.`).toLowerCase()},c=o.data={},l=o.NATIVE=`N`,u=o.POLYFILL=`P`;e.exports=o},2087:function(e,t,n){var r=n(34),i=Math.floor;e.exports=Number.isInteger||function(e){return!r(e)&&isFinite(e)&&i(e)===e}},4117:function(e){e.exports=function(e){return e==null}},34:function(e,t,n){var r=n(4901);e.exports=function(e){return typeof e==`object`?e!==null:r(e)}},3925:function(e,t,n){var r=n(34);e.exports=function(e){return r(e)||e===null}},6395:function(e){e.exports=!1},5810:function(e,t,n){var r=n(34),i=n(1181).get;e.exports=function(e){if(!r(e))return!1;var t=i(e);return!!t&&t.type===`RawJSON`}},788:function(e,t,n){var r=n(34),i=n(2195),a=n(8227)(`match`);e.exports=function(e){var t;return r(e)&&((t=e[a])===void 0?i(e)===`RegExp`:!!t)}},757:function(e,t,n){var r=n(7751),i=n(4901),a=n(1625),o=n(7040),s=Object;e.exports=o?function(e){return typeof e==`symbol`}:function(e){var t=r(`Symbol`);return i(t)&&a(t.prototype,s(e))}},9539:function(e,t,n){var r=n(9565),i=n(8551),a=n(5966);e.exports=function(e,t,n){var o,s;i(e);try{if(!(o=a(e,`return`))){if(t===`throw`)throw n;return n}o=r(o,e)}catch(e){s=!0,o=e}if(t===`throw`)throw n;if(s)throw o;return i(o),n}},3994:function(e,t,n){var r=n(7657).IteratorPrototype,i=n(2360),a=n(6980),o=n(687),s=n(6269),c=function(){return this};e.exports=function(e,t,n,l){var u=t+` Iterator`;return e.prototype=i(r,{next:a(+!l,n)}),o(e,u,!1,!0),s[u]=c,e}},1088:function(e,t,n){var r=n(6518),i=n(9565),a=n(6395),o=n(350),s=n(4901),c=n(3994),l=n(2787),u=n(2967),d=n(687),f=n(6699),p=n(6840),m=n(8227),h=n(6269),g=n(7657),_=o.PROPER,v=o.CONFIGURABLE,y=g.IteratorPrototype,b=g.BUGGY_SAFARI_ITERATORS,x=m(`iterator`),S=`keys`,C=`values`,w=`entries`,T=function(){return this};e.exports=function(e,t,n,o,m,g,E){c(n,t,o);var D,O,k,A=function(e){if(e===m&&F)return F;if(!b&&e&&e in N)return N[e];switch(e){case S:case C:case w:return function(){return new n(this,e)}}return function(){return new n(this)}},j=t+` Iterator`,M=!1,N=e.prototype,P=N[x]||N[`@@iterator`]||m&&N[m],F=!b&&P||A(m),I=t===`Array`&&N.entries||P;if(I&&(D=l(I.call(new e)))!==Object.prototype&&D.next&&(a||l(D)===y||(u?u(D,y):s(D[x])||p(D,x,T)),d(D,j,!0,!0),a&&(h[j]=T)),_&&m===C&&P&&P.name!==C&&(!a&&v?f(N,`name`,C):(M=!0,F=function(){return i(P,this)})),m)if(O={values:A(C),keys:g?F:A(S),entries:A(w)},E)for(k in O)(b||M||!(k in N))&&p(N,k,O[k]);else r({target:t,proto:!0,forced:b||M},O);return a&&!E||N[x]===F||p(N,x,F,{name:m}),h[t]=F,O}},7657:function(e,t,n){var r,i,a,o=n(9039),s=n(4901),c=n(34),l=n(2360),u=n(2787),d=n(6840),f=n(8227),p=n(6395),m=f(`iterator`),h=!1;[].keys&&(`next`in(a=[].keys())?(i=u(u(a)))!==Object.prototype&&(r=i):h=!0),!c(r)||o((function(){var e={};return r[m].call(e)!==e}))?r={}:p&&(r=l(r)),s(r[m])||d(r,m,(function(){return this})),e.exports={IteratorPrototype:r,BUGGY_SAFARI_ITERATORS:h}},6269:function(e){e.exports={}},6198:function(e,t,n){var r=n(8014);e.exports=function(e){return r(e.length)}},283:function(e,t,n){var r=n(9504),i=n(9039),a=n(4901),o=n(9297),s=n(3724),c=n(350).CONFIGURABLE,l=n(3706),u=n(1181),d=u.enforce,f=u.get,p=String,m=Object.defineProperty,h=r(``.slice),g=r(``.replace),_=r([].join),v=s&&!i((function(){return m((function(){}),`length`,{value:8}).length!==8})),y=String(String).split(`String`),b=e.exports=function(e,t,n){h(p(t),0,7)===`Symbol(`&&(t=`[`+g(p(t),/^Symbol\(([^)]*)\).*$/,`$1`)+`]`),n&&n.getter&&(t=`get `+t),n&&n.setter&&(t=`set `+t),(!o(e,`name`)||c&&e.name!==t)&&(s?m(e,`name`,{value:t,configurable:!0}):e.name=t),v&&n&&o(n,`arity`)&&e.length!==n.arity&&m(e,`length`,{value:n.arity});try{n&&o(n,`constructor`)&&n.constructor?s&&m(e,`prototype`,{writable:!1}):e.prototype&&=void 0}catch{}var r=d(e);return o(r,`source`)||(r.source=_(y,typeof t==`string`?t:``)),e};Function.prototype.toString=b((function(){return a(this)&&f(this).source||l(this)}),`toString`)},741:function(e){var t=Math.ceil,n=Math.floor;e.exports=Math.trunc||function(e){var r=+e;return(r>0?n:t)(r)}},7819:function(e,t,n){e.exports=!n(9039)((function(){var e=`9007199254740993`,t=JSON.rawJSON(e);return!JSON.isRawJSON(t)||JSON.stringify(t)!==e}))},5749:function(e,t,n){var r=n(788),i=TypeError;e.exports=function(e){if(r(e))throw new i(`The method doesn't accept regular expressions`);return e}},4213:function(e,t,n){var r=n(3724),i=n(9504),a=n(9565),o=n(9039),s=n(1072),c=n(3717),l=n(8773),u=n(8981),d=n(7055),f=Object.assign,p=Object.defineProperty,m=i([].concat);e.exports=!f||o((function(){if(r&&f({b:1},f(p({},`a`,{enumerable:!0,get:function(){p(this,`b`,{value:3,enumerable:!1})}}),{b:2})).b!==1)return!0;var e={},t={},n=Symbol(`assign detection`),i=`abcdefghijklmnopqrst`;return e[n]=7,i.split(``).forEach((function(e){t[e]=e})),f({},e)[n]!==7||s(f({},t)).join(``)!==i}))?function(e,t){for(var n=u(e),i=arguments.length,o=1,f=c.f,p=l.f;i>o;)for(var h,g=d(arguments[o++]),_=f?m(s(g),f(g)):s(g),v=_.length,y=0;v>y;)h=_[y++],r&&!a(p,g,h)||(n[h]=g[h]);return n}:f},2360:function(e,t,n){var r,i=n(8551),a=n(6801),o=n(8727),s=n(421),c=n(397),l=n(4055),u=n(6119),d=`prototype`,f=`script`,p=u(`IE_PROTO`),m=function(){},h=function(e){return`<`+f+`>`+e+`</`+f+`>`},g=function(e){e.write(h(``)),e.close();var t=e.parentWindow.Object;return e=null,t},_=function(){try{r=new ActiveXObject(`htmlfile`)}catch{}var e,t,n;_=typeof document<`u`?document.domain&&r?g(r):(t=l(`iframe`),n=`java`+f+`:`,t.style.display=`none`,c.appendChild(t),t.src=String(n),(e=t.contentWindow.document).open(),e.write(h(`document.F=Object`)),e.close(),e.F):g(r);for(var i=o.length;i--;)delete _[d][o[i]];return _()};s[p]=!0,e.exports=Object.create||function(e,t){var n;return e===null?n=_():(m[d]=i(e),n=new m,m[d]=null,n[p]=e),t===void 0?n:a.f(n,t)}},6801:function(e,t,n){var r=n(3724),i=n(8686),a=n(4913),o=n(8551),s=n(5397),c=n(1072);t.f=r&&!i?Object.defineProperties:function(e,t){o(e);for(var n,r=s(t),i=c(t),l=i.length,u=0;l>u;)a.f(e,n=i[u++],r[n]);return e}},4913:function(e,t,n){var r=n(3724),i=n(5917),a=n(8686),o=n(8551),s=n(6969),c=TypeError,l=Object.defineProperty,u=Object.getOwnPropertyDescriptor,d=`enumerable`,f=`configurable`,p=`writable`;t.f=r?a?function(e,t,n){if(o(e),t=s(t),o(n),typeof e==`function`&&t===`prototype`&&`value`in n&&p in n&&!n[p]){var r=u(e,t);r&&r[p]&&(e[t]=n.value,n={configurable:f in n?n[f]:r[f],enumerable:d in n?n[d]:r[d],writable:!1})}return l(e,t,n)}:l:function(e,t,n){if(o(e),t=s(t),o(n),i)try{return l(e,t,n)}catch{}if(`get`in n||`set`in n)throw new c(`Accessors not supported`);return`value`in n&&(e[t]=n.value),e}},7347:function(e,t,n){var r=n(3724),i=n(9565),a=n(8773),o=n(6980),s=n(5397),c=n(6969),l=n(9297),u=n(5917),d=Object.getOwnPropertyDescriptor;t.f=r?d:function(e,t){if(e=s(e),t=c(t),u)try{return d(e,t)}catch{}if(l(e,t))return o(!i(a.f,e,t),e[t])}},298:function(e,t,n){var r=n(2195),i=n(5397),a=n(8480).f,o=n(7680),s=typeof window==`object`&&window&&Object.getOwnPropertyNames?Object.getOwnPropertyNames(window):[];e.exports.f=function(e){return s&&r(e)===`Window`?function(e){try{return a(e)}catch{return o(s)}}(e):a(i(e))}},8480:function(e,t,n){var r=n(1828),i=n(8727).concat(`length`,`prototype`);t.f=Object.getOwnPropertyNames||function(e){return r(e,i)}},3717:function(e,t){t.f=Object.getOwnPropertySymbols},2787:function(e,t,n){var r=n(9297),i=n(4901),a=n(8981),o=n(6119),s=n(2211),c=o(`IE_PROTO`),l=Object,u=l.prototype;e.exports=s?l.getPrototypeOf:function(e){var t=a(e);if(r(t,c))return t[c];var n=t.constructor;return i(n)&&t instanceof n?n.prototype:t instanceof l?u:null}},1625:function(e,t,n){e.exports=n(9504)({}.isPrototypeOf)},1828:function(e,t,n){var r=n(9504),i=n(9297),a=n(5397),o=n(9617).indexOf,s=n(421),c=r([].push);e.exports=function(e,t){var n,r=a(e),l=0,u=[];for(n in r)!i(s,n)&&i(r,n)&&c(u,n);for(;t.length>l;)i(r,n=t[l++])&&(~o(u,n)||c(u,n));return u}},1072:function(e,t,n){var r=n(1828),i=n(8727);e.exports=Object.keys||function(e){return r(e,i)}},8773:function(e,t){var n={}.propertyIsEnumerable,r=Object.getOwnPropertyDescriptor;t.f=r&&!n.call({1:2},1)?function(e){var t=r(this,e);return!!t&&t.enumerable}:n},2551:function(e,t,n){var r=n(6395),i=n(4576),a=n(9039),o=n(3607);e.exports=r||!a((function(){if(!(o&&o<535)){var e=Math.random();__defineSetter__.call(null,e,(function(){})),delete i[e]}}))},2967:function(e,t,n){var r=n(6706),i=n(34),a=n(7750),o=n(3506);e.exports=Object.setPrototypeOf||(`__proto__`in{}?function(){var e,t=!1,n={};try{(e=r(Object.prototype,`__proto__`,`set`))(n,[]),t=n instanceof Array}catch{}return function(n,r){return a(n),o(r),i(n)&&(t?e(n,r):n.__proto__=r),n}}():void 0)},3179:function(e,t,n){var r=n(2140),i=n(6955);e.exports=r?{}.toString:function(){return`[object `+i(this)+`]`}},4270:function(e,t,n){var r=n(9565),i=n(4901),a=n(34),o=TypeError;e.exports=function(e,t){var n,s;if(t===`string`&&i(n=e.toString)&&!a(s=r(n,e))||i(n=e.valueOf)&&!a(s=r(n,e))||t!==`string`&&i(n=e.toString)&&!a(s=r(n,e)))return s;throw new o(`Can't convert object to primitive value`)}},5031:function(e,t,n){var r=n(7751),i=n(9504),a=n(8480),o=n(3717),s=n(8551),c=i([].concat);e.exports=r(`Reflect`,`ownKeys`)||function(e){var t=a.f(s(e)),n=o.f;return n?c(t,n(e)):t}},8235:function(e,t,n){var r=n(9504),i=n(9297),a=SyntaxError,o=parseInt,s=String.fromCharCode,c=r(``.charAt),l=r(``.slice),u=r(/./.exec),d={'\\"':`"`,"\\\\":`\\`,"\\/":`/`,"\\b":`\b`,"\\f":`\f`,"\\n":`
+`)[0]}),i&&(0,G.jsx)(`span`,{className:`text-bambu-gray/50 shrink-0`,children:n?(0,G.jsx)(gs,{className:`w-3.5 h-3.5`}):(0,G.jsx)(ps,{className:`w-3.5 h-3.5`})})]})},t)})})}),(0,G.jsx)(`div`,{className:`flex items-center justify-between p-3 border-t border-bambu-dark-tertiary text-sm text-bambu-gray`,children:d?(0,G.jsxs)(`span`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`w-2 h-2 bg-green-500 rounded-full animate-pulse`}),`Auto-refreshing every 2 seconds`]}):(0,G.jsx)(`span`,{children:`Click Start to enable live log streaming`})})]})]})}function y0e(e){return e<1024?`${e} B`:e<1024*1024?`${(e/1024).toFixed(1)} KB`:e<1024*1024*1024?`${(e/(1024*1024)).toFixed(1)} MB`:`${(e/(1024*1024*1024)).toFixed(2)} GB`}function P9({icon:e,label:t,value:n,subValue:r,color:i=`text-bambu-green`}){return(0,G.jsxs)(`div`,{className:`flex items-start gap-3 p-4 bg-bambu-dark rounded-lg`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg bg-bambu-dark-tertiary ${i}`,children:(0,G.jsx)(e,{className:`w-5 h-5`})}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:t}),(0,G.jsx)(`p`,{className:`text-lg font-semibold text-white truncate`,children:n}),r&&(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mt-0.5`,children:r})]})]})}function b0e({percent:e,color:t=`bg-bambu-green`}){return(0,G.jsx)(`div`,{className:`w-full h-2 bg-bambu-dark rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full ${t} transition-all duration-300`,style:{width:`${Math.min(100,e)}%`}})})}function F9({title:e,icon:t,children:n}){return(0,G.jsxs)(Ld,{className:`p-6`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-4`,children:[(0,G.jsx)(t,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e})]}),n]})}function x0e(){let{t:e}=U(),t=co(),[n,r]=(0,y.useState)(null),[i,a]=(0,y.useState)(!1),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(null),{data:u,isLoading:d,refetch:f,isFetching:p}=K({queryKey:[`systemInfo`],queryFn:Z.getSystemInfo,refetchInterval:3e4}),{data:m}=K({queryKey:[`debugLogging`],queryFn:Ed.getDebugLoggingState,staleTime:10*1e3,refetchInterval:10*1e3}),{data:h}=K({queryKey:[`settings`],queryFn:Z.getSettings}),{data:g}=K({queryKey:[`library-stats`],queryFn:Z.getLibraryStats}),{data:_}=K({queryKey:[`printers`],queryFn:Z.getPrinters}),{data:v,refetch:b,isFetching:x}=K({queryKey:[`systemHealth`],queryFn:Z.getSystemHealth,staleTime:60*1e3}),S=h?.time_format||`system`,C=async()=>{s(!0);try{let e=await Ed.setDebugLogging(!m?.enabled);t.setQueryData([`debugLogging`],e)}catch(e){console.error(`Failed to toggle debug logging:`,e)}finally{s(!1)}},w=async()=>{r(null),a(!0);try{await Ed.downloadSupportBundle()}catch(e){r(e instanceof Error?e.message:`Failed to download support bundle`)}finally{a(!1)}};if(d)return(0,G.jsx)(`div`,{className:`flex items-center justify-center h-64`,children:(0,G.jsx)(Y,{className:`w-8 h-8 text-bambu-green animate-spin`})});if(!u)return(0,G.jsx)(`div`,{className:`p-6 text-center text-bambu-gray`,children:e(`system.failedToLoad`,`Failed to load system information`)});let T=u.storage.disk_percent_used>90?`bg-red-500`:u.storage.disk_percent_used>75?`bg-yellow-500`:`bg-bambu-green`,E=u.memory.percent_used>90?`bg-red-500`:u.memory.percent_used>75?`bg-yellow-500`:`bg-bambu-green`;return(0,G.jsxs)(`div`,{className:`p-6 space-y-6`,children:[(0,G.jsxs)(`div`,{className:`flex flex-col items-start gap-4 sm:flex-row sm:items-center sm:justify-between`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h1`,{className:`text-2xl font-bold text-white`,children:e(`system.title`,`System Information`)}),(0,G.jsx)(`p`,{className:`text-bambu-gray mt-1`,children:e(`system.subtitle`,`Monitor system resources and database statistics`)})]}),(0,G.jsxs)(`button`,{onClick:()=>f(),disabled:p,className:`flex items-center gap-2 px-4 py-2 bg-bambu-dark-secondary hover:bg-bambu-dark-tertiary rounded-lg transition-colors disabled:opacity-50`,children:[(0,G.jsx)(Vl,{className:`w-4 h-4 ${p?`animate-spin`:``}`}),e(`common.refresh`,`Refresh`)]})]}),(0,G.jsx)(F9,{title:e(`system.application`,`Application`),icon:eu,children:(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-3 gap-4`,children:[(0,G.jsx)(P9,{icon:eu,label:e(`system.version`,`Version`),value:`v${u.app.version}`}),(0,G.jsx)(P9,{icon:js,label:e(`system.uptime`,`System Uptime`),value:u.system.uptime_formatted}),(0,G.jsx)(P9,{icon:eu,label:e(`system.hostname`,`Hostname`),value:u.system.hostname})]})}),(0,G.jsx)(F9,{title:e(`support.title`,`Support & Troubleshooting`),icon:Fc,children:(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`support.description`,`Enable debug logging to capture detailed information, then download a support bundle to share when reporting issues.`)}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg ${m?.enabled?`bg-amber-500/20 text-amber-500`:`bg-bambu-dark-tertiary text-bambu-gray`}`,children:(0,G.jsx)($o,{className:`w-5 h-5`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`font-medium text-white`,children:e(`support.debugLogging`,`Debug Logging`)}),(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[m?.enabled?e(`support.debugLoggingEnabled`,`Capturing detailed logs`):e(`support.debugLoggingDisabled`,`Normal logging level`),m?.enabled&&m.duration_seconds!==null&&(0,G.jsxs)(`span`,{className:`text-amber-700 dark:text-amber-400 ml-2`,children:[`(`,Math.floor(m.duration_seconds/60),`m `,m.duration_seconds%60,`s)`]})]})]})]}),(0,G.jsxs)(`button`,{onClick:C,disabled:o,className:`px-4 py-2 rounded-lg font-medium transition-colors flex items-center gap-2 ${m?.enabled?`bg-amber-100 text-amber-700 hover:bg-amber-200 dark:bg-amber-500/20 dark:text-amber-400 dark:hover:bg-amber-500/30`:`bg-bambu-green/20 text-bambu-green hover:bg-bambu-green/30`} disabled:opacity-50`,children:[o&&(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),m?.enabled?e(`support.disableDebug`,`Disable`):e(`support.enableDebug`,`Enable`)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`p-2 rounded-lg bg-bambu-dark-tertiary text-bambu-green`,children:(0,G.jsx)(Ys,{className:`w-5 h-5`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`font-medium text-white`,children:e(`support.supportBundle`,`Support Bundle`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`support.supportBundleDescription`,`Download system info and logs as a ZIP file`)})]})]}),(0,G.jsxs)(`button`,{onClick:w,disabled:i||!m?.enabled,className:`px-4 py-2 rounded-lg font-medium bg-bambu-green/20 text-bambu-green hover:bg-bambu-green/30 transition-colors flex items-center gap-2 disabled:opacity-50 disabled:cursor-not-allowed`,title:m?.enabled?void 0:e(`support.enableDebugFirst`,`Enable debug logging first`),children:[i&&(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),i?e(`support.bundleGenerating`,`Generating...`):e(`common.download`,`Download`)]})]}),i&&(0,G.jsxs)(`div`,{className:`p-3 bg-bambu-dark-tertiary/40 rounded-lg space-y-1`,children:[(0,G.jsxs)(`p`,{className:`text-sm font-medium text-white flex items-center gap-2`,children:[(0,G.jsx)(Y,{className:`w-3.5 h-3.5 animate-spin text-bambu-green`}),e(`support.bundleGenerating`,`Generating...`)]}),(0,G.jsxs)(`ul`,{className:`text-xs text-bambu-gray list-disc list-inside space-y-0.5 pl-1`,children:[(0,G.jsx)(`li`,{children:e(`support.bundleStepConnection`,`Running printer connectivity checks`)}),(0,G.jsx)(`li`,{children:e(`support.bundleStepVirtualPrinters`,`Running virtual-printer setup checks`)}),(0,G.jsx)(`li`,{children:e(`support.bundleStepLogScan`,`Scanning recent logs for known issues`)}),(0,G.jsx)(`li`,{children:e(`support.bundleStepBuild`,`Building the support bundle ZIP`)})]})]}),n&&(0,G.jsx)(`div`,{className:`p-3 bg-red-100 border border-red-300 rounded-lg text-red-700 dark:bg-red-500/20 dark:border-red-500/30 dark:text-red-400 text-sm`,children:n}),!m?.enabled&&(0,G.jsx)(`div`,{className:`p-4 bg-bambu-dark-tertiary/50 rounded-lg`,children:(0,G.jsxs)(`p`,{className:`text-sm text-bambu-gray`,children:[(0,G.jsx)(`span`,{className:`text-amber-700 dark:text-amber-400 font-medium`,children:e(`support.instructions`,`To report an issue:`)}),(0,G.jsx)(`br`,{}),`1. `,e(`support.step1`,`Enable debug logging`),(0,G.jsx)(`br`,{}),`2. `,e(`support.step2`,`Reproduce the issue`),(0,G.jsx)(`br`,{}),`3. `,e(`support.step3`,`Download the support bundle`),(0,G.jsx)(`br`,{}),`4. `,e(`support.step4`,`Attach the ZIP file to your issue report`)]})}),(0,G.jsxs)(`div`,{className:`p-4 bg-bambu-dark rounded-lg space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm font-medium text-white`,children:e(`support.privacyTitle`,`What's in the support bundle?`)}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-4 text-sm`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-bambu-green font-medium mb-1`,children:e(`support.collected`,`Collected:`)}),(0,G.jsxs)(`ul`,{className:`text-bambu-gray space-y-0.5`,children:[(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem1`,`App version and debug mode`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem2`,`OS, architecture, Python version`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem3`,`Database statistics (counts only)`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem4`,`Printer models and nozzle counts`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem5`,`Non-sensitive settings (themes, formats)`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem6`,`Debug logs (sanitized)`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem7`,`Printer connectivity and firmware versions`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem8`,`Integration status (Spoolman, MQTT, HA)`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem9`,`Network interfaces (subnets only)`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem10`,`Python package versions`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem11`,`Database health checks`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.collectItem12`,`Docker environment details`)]})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-red-700 dark:text-red-400 font-medium mb-1`,children:e(`support.notCollected`,`NOT collected:`)}),(0,G.jsxs)(`ul`,{className:`text-bambu-gray space-y-0.5`,children:[(0,G.jsxs)(`li`,{children:[`• `,e(`support.notItem1`,`Printer names and serial numbers`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.notItem2`,`Access codes and passwords`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.notItem3`,`Email addresses`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.notItem4`,`API keys and tokens`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.notItem5`,`Webhook URLs`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.notItem6`,`Your hostname or username`)]}),(0,G.jsxs)(`li`,{children:[`• `,e(`support.notItem7`,`IP addresses`)]})]})]})]}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray/70`,children:e(`support.privacyNote`,`Email addresses in logs are replaced with [EMAIL], printer names with [PRINTER], serial numbers with [SERIAL], and IP addresses with [IP].`)})]}),(0,G.jsx)(v0e,{})]})}),(0,G.jsxs)(F9,{title:e(`diagnostic.sectionTitle`,`Connection Diagnostic`),icon:xu,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mb-4`,children:e(`diagnostic.sectionDescription`,`Check why a printer won't connect or won't print — port reachability, LAN developer mode, Docker network mode, and credentials.`)}),_&&_.length>0?(0,G.jsx)(`div`,{className:`space-y-2`,children:_.map(t=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-3 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`span`,{className:`font-medium text-white`,children:t.name}),(0,G.jsx)(`span`,{className:`text-sm text-bambu-gray ml-2`,children:t.ip_address})]}),(0,G.jsxs)(`button`,{onClick:()=>l(t),className:`flex items-center gap-2 px-3 py-1.5 text-sm bg-bambu-dark-secondary hover:bg-bambu-dark-tertiary text-white rounded-lg transition-colors flex-shrink-0`,children:[(0,G.jsx)(xu,{className:`w-4 h-4`}),e(`diagnostic.runButton`,`Run diagnostic`)]})]},t.id))}):(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`diagnostic.noPrinters`,`No printers configured.`)})]}),(0,G.jsxs)(F9,{title:e(`systemHealth.sectionTitle`),icon:Ic,children:[(0,G.jsxs)(`div`,{className:`flex items-start justify-between gap-3 mb-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`systemHealth.sectionDescription`)}),(0,G.jsxs)(`button`,{onClick:()=>b(),disabled:x,className:`flex items-center gap-2 px-3 py-1.5 text-sm bg-bambu-dark-secondary hover:bg-bambu-dark-tertiary text-white rounded-lg transition-colors flex-shrink-0 disabled:opacity-50`,children:[(0,G.jsx)(Vl,{className:`w-4 h-4 ${x?`animate-spin`:``}`}),e(`systemHealth.rescan`)]})]}),v?(0,G.jsx)(Kp,{result:v}):(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`common.loading`)})]}),(0,G.jsxs)(F9,{title:e(`system.database`,`Database`),icon:Ws,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-4 mb-4`,children:[(0,G.jsx)(P9,{icon:Ws,label:e(`system.dbEngine`,`Database Engine`),value:u.database.engine||`SQLite`}),(0,G.jsx)(P9,{icon:Ws,label:e(`system.dbVersion`,`Version`),value:u.database.version||`unknown`})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 md:grid-cols-4 gap-4 mb-4`,children:[(0,G.jsx)(P9,{icon:Po,label:e(`system.totalArchives`,`Total Archives`),value:u.database.archives}),(0,G.jsx)(P9,{icon:Ss,label:e(`system.completed`,`Completed`),value:u.database.archives_completed,color:`text-green-500`}),(0,G.jsx)(P9,{icon:Ds,label:e(`system.failed`,`Failed`),value:u.database.archives_failed,color:`text-red-500`}),(0,G.jsx)(P9,{icon:Y,label:e(`system.printing`,`Printing`),value:u.database.archives_printing,color:`text-yellow-500`})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 md:grid-cols-4 gap-4`,children:[(0,G.jsx)(P9,{icon:Ll,label:e(`system.printers`,`Printers`),value:u.database.printers}),(0,G.jsx)(P9,{icon:Cl,label:e(`system.filaments`,`Filaments`),value:u.database.filaments}),(0,G.jsx)(P9,{icon:gc,label:e(`system.projects`,`Projects`),value:u.database.projects}),(0,G.jsx)(P9,{icon:Nl,label:e(`system.smartPlugs`,`Smart Plugs`),value:u.database.smart_plugs})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-4 mt-4`,children:[(0,G.jsx)(P9,{icon:js,label:e(`system.totalPrintTime`,`Total Print Time`),value:u.database.total_print_time_formatted}),(0,G.jsx)(P9,{icon:Po,label:e(`system.totalFilament`,`Total Filament Used`),value:`${u.database.total_filament_kg} kg`,subValue:`${u.database.total_filament_grams.toLocaleString()} g`})]})]}),(0,G.jsxs)(F9,{title:e(`system.connectedPrinters`,`Connected Printers`),icon:Ll,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-4 mb-4`,children:[(0,G.jsx)(`div`,{className:`text-3xl font-bold text-bambu-green`,children:u.printers.connected}),(0,G.jsx)(`div`,{className:`text-bambu-gray`,children:e(`system.ofTotal`,`of {{total}} printers connected`,{total:u.printers.total})})]}),u.printers.connected_list.length>0?(0,G.jsx)(`div`,{className:`space-y-2`,children:u.printers.connected_list.map(e=>(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-3 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full bg-bambu-green`}),(0,G.jsx)(`span`,{className:`font-medium text-white`,children:e.name})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-4 text-sm text-bambu-gray`,children:[(0,G.jsx)(`span`,{children:e.model}),(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded ${e.state===`RUNNING`?`bg-bambu-green/20 text-bambu-green`:e.state===`IDLE`?`bg-blue-100 text-blue-700 dark:bg-blue-500/20 dark:text-blue-400`:`bg-bambu-dark-tertiary`}`,children:e.state})]})]},e.id))}):(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:e(`system.noPrintersConnected`,`No printers connected`)})]}),(0,G.jsx)(F9,{title:e(`system.storage`,`Storage`),icon:Nc,children:(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex justify-between text-sm mb-1`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:e(`system.diskUsage`,`Disk Usage`)}),(0,G.jsxs)(`span`,{className:`text-white`,children:[u.storage.disk_used_formatted,` / `,u.storage.disk_total_formatted]})]}),(0,G.jsx)(b0e,{percent:u.storage.disk_percent_used,color:T}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:[u.storage.disk_free_formatted,` `,e(`system.free`,`free`),` (`,(100-u.storage.disk_percent_used).toFixed(1),`%)`]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-3 gap-4`,children:[(0,G.jsx)(P9,{icon:Po,label:e(`system.archiveStorage`,`Archive Storage`),value:u.storage.archive_size_formatted}),(0,G.jsx)(P9,{icon:Ws,label:e(`system.databaseSize`,`Database Size`),value:u.storage.database_size_formatted}),g&&(0,G.jsx)(P9,{icon:_c,label:e(`system.fileManagerStorage`,`File Manager`),value:y0e(g.total_size_bytes),subValue:`${g.total_files} files, ${g.total_folders} folders`})]})]})}),(0,G.jsxs)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-6`,children:[(0,G.jsx)(F9,{title:e(`system.memory`,`Memory`),icon:ll,children:(0,G.jsx)(`div`,{className:`space-y-4`,children:(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`div`,{className:`flex justify-between text-sm mb-1`,children:[(0,G.jsx)(`span`,{className:`text-bambu-gray`,children:e(`system.memoryUsage`,`Memory Usage`)}),(0,G.jsxs)(`span`,{className:`text-white`,children:[u.memory.used_formatted,` / `,u.memory.total_formatted]})]}),(0,G.jsx)(b0e,{percent:u.memory.percent_used,color:E}),(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray mt-1`,children:[u.memory.available_formatted,` `,e(`system.available`,`available`)]})]})})}),(0,G.jsx)(F9,{title:e(`system.cpu`,`CPU`),icon:Hs,children:(0,G.jsx)(`div`,{className:`space-y-4`,children:(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-4`,children:[(0,G.jsx)(P9,{icon:Hs,label:e(`system.cores`,`Cores`),value:u.cpu.count,subValue:`${u.cpu.count_logical} logical`}),(0,G.jsx)(P9,{icon:Hs,label:e(`system.usage`,`Usage`),value:`${u.cpu.percent}%`})]})})})]}),(0,G.jsx)(F9,{title:e(`system.systemDetails`,`System Details`),icon:eu,children:(0,G.jsxs)(`div`,{className:`grid grid-cols-2 md:grid-cols-4 gap-4`,children:[(0,G.jsx)(P9,{icon:eu,label:e(`system.os`,`Operating System`),value:u.system.platform,subValue:u.system.platform_release}),(0,G.jsx)(P9,{icon:Hs,label:e(`system.architecture`,`Architecture`),value:u.system.architecture}),(0,G.jsx)(P9,{icon:eu,label:e(`system.python`,`Python`),value:u.system.python_version}),(0,G.jsx)(P9,{icon:js,label:e(`system.bootTime`,`Boot Time`),value:rp(u.system.boot_time,S)})]})}),c&&(0,G.jsx)(Wp,{printerId:c.id,printerName:c.name,onClose:()=>l(null)})]})}var I9=`auth_remember_me`,L9=`auth_post_login_redirect`;function R9(e){return e?`persistent`:`session`}function S0e(){try{let e=sessionStorage.getItem(I9)===`1`;return sessionStorage.removeItem(I9),e}catch(e){return console.warn(`consumeSavedRememberMe: sessionStorage unavailable, Remember Me preference lost across OIDC redirect`,e),!1}}function z9(e){return!e||!e.startsWith(`/`)||e.startsWith(`//`)||e.startsWith(`/login`)?null:e}function C0e(e){let t=z9(e);if(t)try{sessionStorage.setItem(L9,t)}catch(e){console.warn(`stashPostLoginRedirect: sessionStorage unavailable, post-login target will be lost across OIDC redirect`,e)}}function w0e(){try{let e=sessionStorage.getItem(L9);return sessionStorage.removeItem(L9),z9(e)}catch(e){return console.warn(`consumePostLoginRedirect: sessionStorage unavailable`,e),null}}function T0e({provider:e,onClick:t,disabled:n}){let{t:r}=U(),[i,a]=(0,y.useState)(!1);return(0,G.jsxs)(`button`,{type:`button`,onClick:t,disabled:n,className:`w-full flex items-center justify-center gap-3 py-3 px-4 bg-bambu-dark-secondary border border-bambu-dark-tertiary hover:border-bambu-green/50 rounded-lg text-white font-medium transition-colors disabled:opacity-50`,children:[e.has_icon&&!i?(0,G.jsx)(`img`,{src:Z.oidcProviderIconUrl(e.id),alt:``,className:`w-5 h-5 object-contain`,onError:()=>a(!0)}):(0,G.jsx)(ou,{className:`w-5 h-5 text-bambu-green`}),r(`login.twoFA.signInWith`,{provider:e.name})]})}function E0e(){let e=or(),t=rr(),[n]=Ri(),{t:r}=U(),{login:i,loginWithToken:a,user:o,loading:s}=jd(),{showToast:c}=Gd(),{mode:l}=Pd();function u(){let e=t.state?.from;if(e?.pathname){let t=z9(`${e.pathname}${e.search??``}`);if(t)return t}return w0e()??`/`}let[d,f]=(0,y.useState)(``),[p,m]=(0,y.useState)(``),[h,g]=(0,y.useState)(!1),[_,v]=(0,y.useState)(``),[b,x]=(0,y.useState)(`credentials`),[S,C]=(0,y.useState)(``),[w,T]=(0,y.useState)([]),[E,D]=(0,y.useState)(`totp`),[O,k]=(0,y.useState)(``),[A,j]=(0,y.useState)(!1),M=(0,y.useRef)(null),[N,P]=(0,y.useState)(!1),[F,I]=(0,y.useState)(``),[L,R]=(0,y.useState)(``),[z,B]=(0,y.useState)(``),{data:V}=K({queryKey:[`advancedAuthStatus`],queryFn:()=>Z.getAdvancedAuthStatus()}),{data:ee}=K({queryKey:[`oidcProviders`],queryFn:()=>Z.getOIDCProviders()}),[te,ne]=(0,y.useState)(!1);(0,y.useEffect)(()=>{!s&&o&&b===`credentials`&&e(`/`,{replace:!0})},[s,o,b,e]);let re=(0,y.useRef)(!1);(0,y.useEffect)(()=>{if(re.current||n.get(`fallback`)===`local`||!V||!V.autologin_provider_id||window.location.hash.startsWith(`#oidc_token=`)||n.get(`oidc_error`))return;re.current=!0;let e=V.autologin_provider_id,t=new Promise((e,t)=>setTimeout(()=>t(Error(`autologin timeout`)),5e3));Promise.race([Z.getOIDCAuthorizeUrl(e),t]).then(e=>{window.location.href=e.auth_url}).catch(()=>{ne(!0)})},[V,n]);let ie=V?.local_login_enabled!==!1,ae=te&&V?.autologin_provider_id!=null;(0,y.useEffect)(()=>{let t=window.location.hash,n=t.startsWith(`#reset_token=`)?t.slice(13):null;n&&(I(n),x(`reset-password`),e(`/login`,{replace:!0}))},[]),(0,y.useEffect)(()=>{let t=window.location.hash,i=t.startsWith(`#oidc_token=`)?t.slice(12):null,o=n.get(`oidc_error`);if(!i&&!o)return;let s=S0e();if(o){c({oidc_provider_error:r(`login.oidcErrors.providerError`),missing_parameters:r(`login.oidcErrors.missingParameters`),invalid_state:r(`login.oidcErrors.invalidState`),state_expired:r(`login.oidcErrors.stateExpired`),provider_not_found:r(`login.oidcErrors.providerNotFound`),discovery_failed:r(`login.oidcErrors.discoveryFailed`),invalid_discovery_document:r(`login.oidcErrors.invalidDiscovery`),token_exchange_network_error:r(`login.oidcErrors.networkError`),token_exchange_bad_response:r(`login.oidcErrors.badResponse`),no_id_token:r(`login.oidcErrors.noIdToken`),token_validation_failed:r(`login.oidcErrors.validationFailed`),nonce_mismatch:r(`login.oidcErrors.nonceMismatch`),missing_sub_claim:r(`login.oidcErrors.missingSubClaim`),no_linked_account:r(`login.oidcErrors.noLinkedAccount`),account_inactive:r(`login.oidcErrors.accountInactive`),user_resolution_failed:r(`login.oidcErrors.userResolutionFailed`),internal_error:r(`login.oidcErrors.internalError`)}[o]??(o.startsWith(`token_exchange_`)?r(`login.oidcErrors.tokenExchangeFailed`):r(`login.oidcLoginFailed`)),`error`),e(`/login`,{replace:!0});return}i&&Z.exchangeOIDCToken(i).then(t=>{if(t.requires_2fa&&t.pre_auth_token){P(s),C(t.pre_auth_token);let n=t.two_fa_methods??[];T(n),n.includes(`totp`)?D(`totp`):n.includes(`email`)?D(`email`):D(`backup`),x(`2fa`),e(`/login`,{replace:!0})}else t.access_token&&t.user?(a(t.access_token,t.user,R9(s)),c(r(`login.loginSuccess`)),e(u(),{replace:!0})):(c(r(`login.oidcLoginFailed`),`error`),e(`/login`,{replace:!0}))}).catch(t=>{console.error(`OIDC token exchange failed`,t),c(r(`login.oidcLoginFailed`),`error`),e(`/login`,{replace:!0})})},[n]);let oe=q({mutationFn:()=>i(d,p,R9(N)),onSuccess:t=>{if(t.requires_2fa&&t.pre_auth_token){C(t.pre_auth_token);let e=t.two_fa_methods??[];T(e),e.includes(`totp`)?D(`totp`):e.includes(`email`)?D(`email`):D(`backup`),x(`2fa`)}else t.access_token&&t.user&&(c(r(`login.loginSuccess`)),e(u(),{replace:!0}))},onError:e=>{c(e.message||r(`login.loginFailed`),`error`)}}),se=q({mutationFn:e=>Z.forgotPassword({email:e}),onSuccess:e=>{c(e.message,`success`),g(!1),v(``)},onError:e=>{c(e.message,`error`)}}),H=q({mutationFn:()=>Z.forgotPasswordConfirm(F,L),onSuccess:e=>{c(e.message,`success`),x(`credentials`),I(``),R(``),B(``)},onError:e=>{c(e.message||r(`login.resetPassword.resetFailed`),`error`)}}),ce=q({mutationFn:()=>Z.sendEmailOTP(S),onSuccess:e=>{j(!0),e.pre_auth_token&&C(e.pre_auth_token),c(e.message,`success`)},onError:e=>{c(e.message||r(`login.twoFA.sendCodeFailed`),`error`)}}),le=q({mutationFn:()=>Z.verify2FA({pre_auth_token:S,code:O,method:E}),onSuccess:t=>{t.access_token&&t.user?(a(t.access_token,t.user,R9(N)),c(r(`login.loginSuccess`)),e(u(),{replace:!0})):(console.error(`2FA verify: unexpected response shape`,t),c(r(`login.loginFailed`),`error`))},onError:e=>{c(e.message||r(`login.twoFA.invalidCode`),`error`),k(``)}}),ue=q({mutationFn:e=>Z.getOIDCAuthorizeUrl(e),onSuccess:e=>{if(N)try{sessionStorage.setItem(I9,`1`)}catch(e){console.warn(`setItem auth_remember_me failed, Remember Me will not carry through OIDC redirect`,e)}let n=t.state?.from;n?.pathname&&C0e(`${n.pathname}${n.search??``}`),window.location.href=e.auth_url},onError:e=>{c(e.message||r(`login.oidcLoginFailed`),`error`)}}),de=e=>{if(e.preventDefault(),!d||!p){c(r(`login.enterCredentials`),`error`);return}oe.mutate()},fe=e=>{if(e.preventDefault(),!O.trim()){c(r(`login.twoFA.enterCode`),`error`);return}le.mutate()},pe=e=>{if(e.preventDefault(),!_){c(r(`login.enterEmail`),`error`);return}se.mutate(_)},me=e=>{D(e),k(``),j(!1),setTimeout(()=>M.current?.focus(),0)};return b===`reset-password`?(0,G.jsx)(`div`,{className:`min-h-screen flex items-center justify-center bg-bambu-dark p-4`,children:(0,G.jsxs)(`div`,{className:`max-w-md w-full space-y-8 p-8 bg-gradient-to-br from-bambu-card to-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary shadow-lg`,children:[(0,G.jsxs)(`div`,{className:`text-center`,children:[(0,G.jsx)(`div`,{className:`flex items-center justify-center mb-4`,children:(0,G.jsx)(`div`,{className:`w-14 h-14 rounded-full bg-bambu-green/20 flex items-center justify-center`,children:(0,G.jsx)(Gc,{className:`w-7 h-7 text-bambu-green`})})}),(0,G.jsx)(`h2`,{className:`text-2xl font-bold text-white`,children:r(`login.resetPassword.title`)}),(0,G.jsx)(`p`,{className:`mt-2 text-sm text-bambu-gray`,children:r(`login.resetPassword.subtitle`)})]}),(0,G.jsxs)(`form`,{onSubmit:e=>{if(e.preventDefault(),L!==z){c(r(`login.resetPassword.passwordsDoNotMatch`),`error`);return}if(L.length<8){c(r(`login.resetPassword.passwordTooShort`),`error`);return}H.mutate()},className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`new-password`,className:`block text-sm font-medium text-white mb-2`,children:r(`login.resetPassword.newPassword`)}),(0,G.jsx)(`input`,{id:`new-password`,type:`password`,required:!0,value:L,onChange:e=>R(e.target.value),className:`block w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:r(`login.resetPassword.newPasswordPlaceholder`),autoFocus:!0,autoComplete:`new-password`,minLength:8})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`confirm-password`,className:`block text-sm font-medium text-white mb-2`,children:r(`login.resetPassword.confirmPassword`)}),(0,G.jsx)(`input`,{id:`confirm-password`,type:`password`,required:!0,value:z,onChange:e=>B(e.target.value),className:`block w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:r(`login.resetPassword.confirmPasswordPlaceholder`),autoComplete:`new-password`})]}),(0,G.jsx)(`button`,{type:`submit`,disabled:H.isPending||!L||!z,className:`w-full flex justify-center py-3 px-4 bg-bambu-green hover:bg-bambu-green-light text-white font-medium rounded-lg shadow-lg shadow-bambu-green/20 hover:shadow-bambu-green/30 focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:ring-offset-2 focus:ring-offset-bambu-dark-secondary transition-all disabled:opacity-50 disabled:cursor-not-allowed`,children:H.isPending?r(`login.resetPassword.saving`):r(`login.resetPassword.submit`)})]}),(0,G.jsx)(`div`,{className:`text-center`,children:(0,G.jsx)(`button`,{type:`button`,onClick:()=>{x(`credentials`),I(``),R(``),B(``)},className:`text-sm text-bambu-gray hover:text-bambu-green transition-colors`,children:r(`login.resetPassword.backToLogin`)})})]})}):b===`2fa`?(0,G.jsx)(`div`,{className:`min-h-screen flex items-center justify-center bg-bambu-dark p-4`,children:(0,G.jsxs)(`div`,{className:`max-w-md w-full space-y-8 p-8 bg-gradient-to-br from-bambu-card to-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary shadow-lg`,children:[(0,G.jsxs)(`div`,{className:`text-center`,children:[(0,G.jsx)(`div`,{className:`flex items-center justify-center mb-4`,children:(0,G.jsx)(`div`,{className:`w-14 h-14 rounded-full bg-bambu-green/20 flex items-center justify-center`,children:(0,G.jsx)(ou,{className:`w-7 h-7 text-bambu-green`})})}),(0,G.jsx)(`h2`,{className:`text-2xl font-bold text-white`,children:r(`login.twoFA.title`)}),(0,G.jsx)(`p`,{className:`mt-2 text-sm text-bambu-gray`,children:r(`login.twoFA.subtitle`)})]}),w.length>1&&(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[w.includes(`totp`)&&(0,G.jsxs)(`button`,{type:`button`,onClick:()=>me(`totp`),className:`flex-1 flex flex-col items-center gap-1 py-2 px-3 rounded-lg border text-xs font-medium transition-colors ${E===`totp`?`border-bambu-green bg-bambu-green/10 text-bambu-green`:`border-bambu-dark-tertiary text-bambu-gray hover:border-bambu-green/50`}`,children:[(0,G.jsx)(pu,{className:`w-4 h-4`}),r(`login.twoFA.methodAuthenticator`)]}),w.includes(`email`)&&(0,G.jsxs)(`button`,{type:`button`,onClick:()=>me(`email`),className:`flex-1 flex flex-col items-center gap-1 py-2 px-3 rounded-lg border text-xs font-medium transition-colors ${E===`email`?`border-bambu-green bg-bambu-green/10 text-bambu-green`:`border-bambu-dark-tertiary text-bambu-gray hover:border-bambu-green/50`}`,children:[(0,G.jsx)(il,{className:`w-4 h-4`}),r(`login.twoFA.methodEmail`)]}),w.includes(`backup`)&&(0,G.jsxs)(`button`,{type:`button`,onClick:()=>me(`backup`),className:`flex-1 flex flex-col items-center gap-1 py-2 px-3 rounded-lg border text-xs font-medium transition-colors ${E===`backup`?`border-bambu-green bg-bambu-green/10 text-bambu-green`:`border-bambu-dark-tertiary text-bambu-gray hover:border-bambu-green/50`}`,children:[(0,G.jsx)(Gc,{className:`w-4 h-4`}),r(`login.twoFA.methodBackup`)]})]}),(0,G.jsxs)(`form`,{onSubmit:fe,className:`space-y-4`,children:[E===`totp`&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:r(`login.twoFA.instructionsTotp`)}),E===`email`&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:r(A?`login.twoFA.instructionsEmail`:`login.twoFA.instructionsEmailNotSent`)}),!A&&(0,G.jsx)(Q,{type:`button`,variant:`secondary`,className:`w-full`,onClick:()=>ce.mutate(),disabled:ce.isPending,children:ce.isPending?r(`login.twoFA.sendingCode`):r(`login.twoFA.sendCodeButton`)}),A&&(0,G.jsx)(`button`,{type:`button`,onClick:()=>{j(!1),ce.mutate()},className:`text-xs text-bambu-gray hover:text-bambu-green transition-colors`,children:r(`login.twoFA.resendCode`)})]}),E===`backup`&&(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:r(`login.twoFA.instructionsBackup`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`twofa-code`,className:`block text-sm font-medium text-white mb-2`,children:r(E===`backup`?`login.twoFA.backupCodeLabel`:`login.twoFA.codeLabel`)}),(0,G.jsx)(`input`,{ref:M,id:`twofa-code`,type:`text`,inputMode:E===`backup`?`text`:`numeric`,autoComplete:`one-time-code`,value:O,onChange:e=>k(e.target.value.trim()),disabled:E===`email`&&!A,className:`block w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray text-center tracking-widest text-xl font-mono focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors disabled:opacity-40`,placeholder:r(E===`backup`?`login.twoFA.backupCodePlaceholder`:`login.twoFA.codePlaceholder`),maxLength:E===`backup`?8:6,autoFocus:!0})]}),(0,G.jsx)(`button`,{type:`submit`,disabled:le.isPending||!O.trim()||E===`email`&&!A,className:`w-full flex justify-center py-3 px-4 bg-bambu-green hover:bg-bambu-green-light text-white font-medium rounded-lg shadow-lg shadow-bambu-green/20 hover:shadow-bambu-green/30 focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:ring-offset-2 focus:ring-offset-bambu-dark-secondary transition-all disabled:opacity-50 disabled:cursor-not-allowed`,children:le.isPending?r(`login.twoFA.verifyingButton`):r(`login.twoFA.verifyButton`)})]}),(0,G.jsx)(`div`,{className:`text-center`,children:(0,G.jsx)(`button`,{type:`button`,onClick:()=>{x(`credentials`),C(``),k(``),j(!1)},className:`text-sm text-bambu-gray hover:text-bambu-green transition-colors`,children:r(`login.twoFA.backToLogin`)})})]})}):(0,G.jsxs)(`div`,{className:`min-h-screen flex items-center justify-center bg-bambu-dark p-4`,children:[(0,G.jsxs)(`div`,{className:`max-w-md w-full space-y-8 p-8 bg-gradient-to-br from-bambu-card to-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary shadow-lg`,children:[(0,G.jsxs)(`div`,{className:`text-center`,children:[(0,G.jsx)(`div`,{className:`flex items-center justify-center mb-6`,children:(0,G.jsx)(`img`,{src:l===`dark`?`/img/bambuddy_logo_dark_transparent.png`:`/img/bambuddy_logo_light.png`,alt:`Bambuddy`,className:`h-16`})}),(0,G.jsx)(`h2`,{className:`text-3xl font-bold text-white`,children:r(`login.title`)}),(0,G.jsx)(`p`,{className:`mt-2 text-sm text-bambu-gray`,children:r(`login.subtitle`)})]}),ae&&(0,G.jsx)(`div`,{className:`mt-6 rounded-lg border border-amber-300 dark:border-amber-500/40 bg-amber-50 dark:bg-amber-500/10 px-4 py-3 text-sm text-amber-800 dark:text-amber-200`,children:r(`login.autologinFailed`)}),!ie&&(0,G.jsx)(`div`,{className:`mt-6 rounded-lg border border-bambu-dark-tertiary bg-bambu-dark/40 px-4 py-3 text-sm text-bambu-gray`,children:r(`login.localDisabledNotice`)}),ie&&(0,G.jsxs)(`form`,{className:`mt-8 space-y-6`,onSubmit:de,children:[(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`username`,className:`block text-sm font-medium text-white mb-2`,children:V?.advanced_auth_enabled?r(`login.usernameOrEmail`):r(`login.username`)}),(0,G.jsx)(`input`,{id:`username`,type:`text`,required:!0,value:d,onChange:e=>f(e.target.value),className:`block w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:V?.advanced_auth_enabled?r(`login.usernameOrEmailPlaceholder`):r(`login.usernamePlaceholder`),autoComplete:`username`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`password`,className:`block text-sm font-medium text-white mb-2`,children:r(`login.password`)||`Password`}),(0,G.jsx)(`input`,{id:`password`,type:`password`,required:!0,value:p,onChange:e=>m(e.target.value),className:`block w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:r(`login.passwordPlaceholder`),autoComplete:`current-password`})]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`input`,{id:`remember-me`,type:`checkbox`,checked:N,onChange:e=>P(e.target.checked),className:`h-4 w-4 rounded border-bambu-dark-tertiary bg-bambu-dark-secondary text-bambu-green focus:ring-bambu-green/50 cursor-pointer`}),(0,G.jsx)(`label`,{htmlFor:`remember-me`,className:`text-sm text-bambu-gray cursor-pointer`,children:r(`login.rememberMe`)})]}),(0,G.jsx)(`div`,{children:(0,G.jsx)(`button`,{type:`submit`,disabled:oe.isPending,className:`w-full flex justify-center py-3 px-4 bg-bambu-green hover:bg-bambu-green-light text-white font-medium rounded-lg shadow-lg shadow-bambu-green/20 hover:shadow-bambu-green/30 focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:ring-offset-2 focus:ring-offset-bambu-dark-secondary transition-all disabled:opacity-50 disabled:cursor-not-allowed disabled:hover:bg-bambu-green`,children:oe.isPending?r(`login.signingIn`):r(`login.signIn`)})}),(0,G.jsx)(`div`,{className:`text-center`,children:(0,G.jsx)(`button`,{type:`button`,onClick:()=>g(!0),className:`text-sm text-bambu-gray hover:text-bambu-green transition-colors`,children:r(`login.forgotPassword`)})})]}),ee&&ee.length>0&&(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 flex items-center`,children:(0,G.jsx)(`div`,{className:`w-full border-t border-bambu-dark-tertiary`})}),(0,G.jsx)(`div`,{className:`relative flex justify-center text-sm`,children:(0,G.jsx)(`span`,{className:`px-2 bg-bambu-dark-secondary text-bambu-gray`,children:r(`login.twoFA.orContinueWith`)})})]}),(0,G.jsx)(`div`,{className:`space-y-2`,children:ee.map(e=>(0,G.jsx)(T0e,{provider:e,onClick:()=>ue.mutate(e.id),disabled:ue.isPending},e.id))})]})]}),h&&(0,G.jsx)(`div`,{className:`fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4`,onClick:()=>g(!1),children:(0,G.jsxs)(Ld,{className:`w-full max-w-md`,onClick:e=>e.stopPropagation(),children:[(0,G.jsx)(Rd,{children:(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(il,{className:`w-5 h-5 text-bambu-green`}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:r(`login.forgotPasswordTitle`)})]}),(0,G.jsx)(Q,{variant:`ghost`,size:`sm`,onClick:()=>{g(!1),v(``)},children:(0,G.jsx)(td,{className:`w-5 h-5`})})]})}),(0,G.jsx)(zd,{children:V?.advanced_auth_enabled?(0,G.jsxs)(`form`,{onSubmit:pe,className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray text-sm`,children:r(`login.forgotPasswordEmailMessage`)}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`forgot-email`,className:`block text-sm font-medium text-white mb-2`,children:r(`login.emailAddress`)}),(0,G.jsx)(`input`,{id:`forgot-email`,type:`email`,required:!0,value:_,onChange:e=>v(e.target.value),className:`block w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:r(`login.emailPlaceholder`)})]}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(Q,{type:`button`,variant:`secondary`,className:`flex-1`,onClick:()=>{g(!1),v(``)},children:r(`login.cancel`)}),(0,G.jsx)(Q,{type:`submit`,className:`flex-1`,disabled:se.isPending,children:se.isPending?r(`login.sending`):r(`login.sendResetEmail`)})]})]}):(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:r(`login.forgotPasswordMessage`)}),(0,G.jsxs)(`div`,{className:`bg-bambu-dark rounded-lg p-4 space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-sm text-white font-medium`,children:r(`login.howToReset`)}),(0,G.jsxs)(`ol`,{className:`text-sm text-bambu-gray space-y-1 list-decimal list-inside`,children:[(0,G.jsx)(`li`,{children:r(`login.resetStep1`)}),(0,G.jsx)(`li`,{children:r(`login.resetStep2`)}),(0,G.jsx)(`li`,{children:r(`login.resetStep3`)}),(0,G.jsx)(`li`,{children:r(`login.resetStep4`)})]})]}),(0,G.jsx)(Q,{variant:`secondary`,className:`w-full`,onClick:()=>g(!1),children:r(`login.gotIt`)})]})})]})})]})}function D0e(){let e=or(),{t}=U(),{showToast:n}=Gd(),{mode:r}=Pd(),{refreshAuth:i}=jd(),[a,o]=(0,y.useState)(!1),[s,c]=(0,y.useState)(``),[l,u]=(0,y.useState)(``),[d,f]=(0,y.useState)(``),p=q({mutationFn:()=>Z.setupAuth({auth_enabled:a,admin_username:a?s:void 0,admin_password:a?l:void 0}),onSuccess:async r=>{await i(),r.auth_enabled?r.admin_created?(n(t(`setup.toast.authEnabledAdminCreated`)),e(`/login`)):(n(t(`setup.toast.authEnabledExistingAdmins`)),e(`/login`)):(n(t(`setup.toast.setupCompleted`)),e(`/`))},onError:e=>{n(e.message,`error`)}});return(0,G.jsx)(`div`,{className:`min-h-screen flex items-center justify-center bg-bambu-dark p-4`,children:(0,G.jsxs)(`div`,{className:`max-w-md w-full space-y-8 p-8 bg-gradient-to-br from-bambu-card to-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary shadow-lg`,children:[(0,G.jsxs)(`div`,{className:`text-center`,children:[(0,G.jsx)(`div`,{className:`flex items-center justify-center mb-6`,children:(0,G.jsx)(`img`,{src:r===`dark`?`/img/bambuddy_logo_dark_transparent.png`:`/img/bambuddy_logo_light.png`,alt:`Bambuddy`,className:`h-16`})}),(0,G.jsx)(`h2`,{className:`text-3xl font-bold text-white`,children:t(`setup.title`)}),(0,G.jsx)(`p`,{className:`mt-2 text-sm text-bambu-gray`,children:t(`setup.subtitle`)})]}),(0,G.jsxs)(`form`,{className:`mt-8 space-y-6`,onSubmit:e=>{if(e.preventDefault(),a&&(s||l)){if(!s||!l){n(t(`setup.toast.enterBothCredentials`),`error`);return}if(l!==d){n(t(`setup.toast.passwordsDoNotMatch`),`error`);return}if(l.length<6){n(t(`setup.toast.passwordTooShort`),`error`);return}}p.mutate()},children:[(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center p-4 bg-bambu-dark-secondary/50 rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`input`,{id:`auth-enabled`,type:`checkbox`,checked:a,onChange:e=>o(e.target.checked),className:`h-4 w-4 text-bambu-green focus:ring-bambu-green border-bambu-dark-tertiary rounded bg-bambu-dark-secondary`}),(0,G.jsx)(`label`,{htmlFor:`auth-enabled`,className:`ml-3 block text-sm font-medium text-white`,children:t(`setup.enableAuth`)})]}),a&&(0,G.jsxs)(`div`,{className:`space-y-4 mt-4`,children:[(0,G.jsx)(`div`,{className:`p-3 bg-bambu-dark-secondary/50 border border-bambu-dark-tertiary rounded-lg`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-2`,children:[(0,G.jsx)(Uc,{className:`w-4 h-4 text-bambu-green mt-0.5 flex-shrink-0`}),(0,G.jsxs)(`div`,{className:`text-sm text-bambu-gray`,children:[(0,G.jsx)(`p`,{className:`text-white font-medium mb-1`,children:t(`setup.adminAccount`)}),(0,G.jsx)(`p`,{children:t(`setup.adminAccountDesc`)})]})]})}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{htmlFor:`admin-username`,className:`block text-sm font-medium text-white mb-2`,children:[t(`setup.adminUsername`),` `,(0,G.jsx)(`span`,{className:`text-bambu-gray text-xs`,children:t(`setup.optionalIfAdminExists`)})]}),(0,G.jsx)(`input`,{id:`admin-username`,type:`text`,value:s,onChange:e=>c(e.target.value),className:`block w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:t(`setup.adminUsernamePlaceholder`),autoComplete:`username`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsxs)(`label`,{htmlFor:`admin-password`,className:`block text-sm font-medium text-white mb-2`,children:[t(`setup.adminPassword`),` `,(0,G.jsx)(`span`,{className:`text-bambu-gray text-xs`,children:t(`setup.optionalIfAdminExists`)})]}),(0,G.jsx)(`input`,{id:`admin-password`,type:`password`,value:l,onChange:e=>u(e.target.value),className:`block w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:t(`setup.adminPasswordPlaceholder`),minLength:6,autoComplete:`new-password`})]}),l&&(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{htmlFor:`confirm-password`,className:`block text-sm font-medium text-white mb-2`,children:t(`setup.confirmPassword`)}),(0,G.jsx)(`input`,{id:`confirm-password`,type:`password`,value:d,onChange:e=>f(e.target.value),className:`block w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors`,placeholder:t(`setup.confirmPasswordPlaceholder`),minLength:6,autoComplete:`new-password`})]})]})]}),(0,G.jsx)(`div`,{children:(0,G.jsx)(`button`,{type:`submit`,disabled:p.isPending,className:`w-full flex justify-center py-3 px-4 bg-bambu-green hover:bg-bambu-green-light text-white font-medium rounded-lg shadow-lg shadow-bambu-green/20 hover:shadow-bambu-green/30 focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:ring-offset-2 focus:ring-offset-bambu-dark-secondary transition-all disabled:opacity-50 disabled:cursor-not-allowed disabled:hover:bg-bambu-green`,children:p.isPending?t(`setup.settingUp`):t(`setup.completeSetup`)})})]})]})})}function O0e(){let{t:e}=U(),{user:t}=jd(),{showToast:n}=Gd(),r=co(),i=or(),[a,o]=(0,y.useState)(!0),[s,c]=(0,y.useState)(!0),[l,u]=(0,y.useState)(!0),[d,f]=(0,y.useState)(!0),[p,m]=(0,y.useState)(!1),{data:h,isLoading:g}=K({queryKey:[`advancedAuthStatus`],queryFn:Z.getAdvancedAuthStatus,staleTime:300*1e3}),{data:_,isLoading:v}=K({queryKey:[`settings`],queryFn:Z.getSettings,staleTime:300*1e3}),{data:b,isLoading:x}=K({queryKey:[`user-email-preferences`],queryFn:()=>Z.getUserEmailPreferences()});(0,y.useEffect)(()=>{(h&&!h.advanced_auth_enabled||_&&!_.user_notifications_enabled)&&i(`/settings`,{replace:!0})},[h,_,i]),(0,y.useEffect)(()=>{b&&(o(b.notify_print_start),c(b.notify_print_complete),u(b.notify_print_failed),f(b.notify_print_stopped),m(!1))},[b]);let S=q({mutationFn:()=>Z.updateUserEmailPreferences({notify_print_start:a,notify_print_complete:s,notify_print_failed:l,notify_print_stopped:d}),onSuccess:()=>{r.invalidateQueries({queryKey:[`user-email-preferences`]}),m(!1),n(e(`notifications.userEmail.saveSuccess`),`success`)},onError:t=>{n(t.message||e(`notifications.userEmail.saveError`),`error`)}}),C=(e,t)=>{e(!t),m(!0)};return x||g||v?(0,G.jsx)(`div`,{className:`flex items-center justify-center h-64`,children:(0,G.jsx)(Y,{className:`w-8 h-8 animate-spin text-bambu-green`})}):(0,G.jsxs)(`div`,{className:`p-4 md:p-6 max-w-2xl mx-auto`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mb-6`,children:[(0,G.jsx)(qo,{className:`w-7 h-7 text-bambu-green`}),(0,G.jsx)(`h1`,{className:`text-2xl font-bold text-white`,children:e(`notifications.userEmail.title`)})]}),(0,G.jsx)(Ld,{className:`mb-6 border-blue-300 bg-blue-50 dark:border-blue-500/30 dark:bg-blue-500/5`,children:(0,G.jsx)(zd,{className:`py-4`,children:(0,G.jsxs)(`div`,{className:`flex items-start gap-3`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full flex items-center justify-center bg-blue-100 dark:bg-blue-500/20 flex-shrink-0`,children:(0,G.jsx)(il,{className:`w-5 h-5 text-blue-600 dark:text-blue-400`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-white font-medium`,children:e(`notifications.userEmail.emailNotifications`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:e(`notifications.userEmail.emailNotificationsDesc`)}),t?.email?(0,G.jsxs)(`p`,{className:`text-sm text-blue-700 dark:text-blue-400 mt-2`,children:[e(`notifications.userEmail.sendingTo`),`: `,(0,G.jsx)(`strong`,{children:t.email})]}):(0,G.jsx)(`p`,{className:`text-sm text-yellow-700 dark:text-yellow-400 mt-2`,children:e(`notifications.userEmail.noEmailWarning`)})]})]})})}),(0,G.jsxs)(Ld,{className:`mb-6`,children:[(0,G.jsxs)(Rd,{children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e(`notifications.userEmail.printJobNotifications`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray mt-1`,children:e(`notifications.userEmail.printJobNotificationsDesc`)})]}),(0,G.jsxs)(zd,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full flex items-center justify-center ${a?`bg-bambu-green/20`:`bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(Ss,{className:`w-5 h-5 ${a?`text-bambu-green`:`text-bambu-gray`}`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`notifications.userEmail.printJobStarts`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`notifications.userEmail.printJobStartsDesc`)})]})]}),(0,G.jsx)(`button`,{onClick:()=>C(o,a),className:`relative inline-flex h-6 w-11 items-center rounded-full transition-colors focus:outline-none focus:ring-2 focus:ring-bambu-green focus:ring-offset-2 focus:ring-offset-bambu-dark ${a?`bg-bambu-green`:`bg-bambu-dark-tertiary`}`,role:`switch`,"aria-checked":a,children:(0,G.jsx)(`span`,{className:`inline-block h-4 w-4 transform rounded-full bg-white transition-transform ${a?`translate-x-6`:`translate-x-1`}`})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full flex items-center justify-center ${s?`bg-bambu-green/20`:`bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(Ss,{className:`w-5 h-5 ${s?`text-bambu-green`:`text-bambu-gray`}`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`notifications.userEmail.printJobFinishes`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`notifications.userEmail.printJobFinishesDesc`)})]})]}),(0,G.jsx)(`button`,{onClick:()=>C(c,s),className:`relative inline-flex h-6 w-11 items-center rounded-full transition-colors focus:outline-none focus:ring-2 focus:ring-bambu-green focus:ring-offset-2 focus:ring-offset-bambu-dark ${s?`bg-bambu-green`:`bg-bambu-dark-tertiary`}`,role:`switch`,"aria-checked":s,children:(0,G.jsx)(`span`,{className:`inline-block h-4 w-4 transform rounded-full bg-white transition-transform ${s?`translate-x-6`:`translate-x-1`}`})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full flex items-center justify-center ${l?`bg-bambu-green/20`:`bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(Ss,{className:`w-5 h-5 ${l?`text-bambu-green`:`text-bambu-gray`}`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`notifications.userEmail.printErrors`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`notifications.userEmail.printErrorsDesc`)})]})]}),(0,G.jsx)(`button`,{onClick:()=>C(u,l),className:`relative inline-flex h-6 w-11 items-center rounded-full transition-colors focus:outline-none focus:ring-2 focus:ring-bambu-green focus:ring-offset-2 focus:ring-offset-bambu-dark ${l?`bg-bambu-green`:`bg-bambu-dark-tertiary`}`,role:`switch`,"aria-checked":l,children:(0,G.jsx)(`span`,{className:`inline-block h-4 w-4 transform rounded-full bg-white transition-transform ${l?`translate-x-6`:`translate-x-1`}`})})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 bg-bambu-dark rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-10 h-10 rounded-full flex items-center justify-center ${d?`bg-bambu-green/20`:`bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(Ss,{className:`w-5 h-5 ${d?`text-bambu-green`:`text-bambu-gray`}`})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:e(`notifications.userEmail.printJobStops`)}),(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray`,children:e(`notifications.userEmail.printJobStopsDesc`)})]})]}),(0,G.jsx)(`button`,{onClick:()=>C(f,d),className:`relative inline-flex h-6 w-11 items-center rounded-full transition-colors focus:outline-none focus:ring-2 focus:ring-bambu-green focus:ring-offset-2 focus:ring-offset-bambu-dark ${d?`bg-bambu-green`:`bg-bambu-dark-tertiary`}`,role:`switch`,"aria-checked":d,children:(0,G.jsx)(`span`,{className:`inline-block h-4 w-4 transform rounded-full bg-white transition-transform ${d?`translate-x-6`:`translate-x-1`}`})})]})]})]}),(0,G.jsx)(`div`,{className:`flex justify-end`,children:(0,G.jsx)(Q,{onClick:()=>S.mutate(),disabled:!p||S.isPending||!t?.email,children:S.isPending?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin`}),e(`common.saving`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Kl,{className:`w-4 h-4`}),e(`common.save`)]})})})]})}function k0e(){let e=or(),[t,n]=Ri(),{t:r}=U(),i=t.get(`archive`),a=t.get(`library_file`),o=t.get(`plate`),s=K({queryKey:[`gcode-viewer-archive-colors`,i],queryFn:()=>Z.getArchiveCapabilities(Number(i)),enabled:!!i,staleTime:5*6e4,retry:!1}),c=K({queryKey:[`gcode-viewer-library-colors`,a],queryFn:()=>Z.getLibraryFilePlates(Number(a)),enabled:!!a,staleTime:5*6e4,retry:!1}),l=K({queryKey:[`gcode-viewer-archive-plates`,i],queryFn:()=>Z.getArchivePlates(Number(i)),enabled:!!i,staleTime:5*6e4,retry:!1}),u=(0,y.useMemo)(()=>(i?l.data?.plates:c.data?.plates)??[],[i,l.data,c.data]),d=(0,y.useMemo)(()=>o?Number(o):u.length===0?null:Math.min(...u.map(e=>e.index)),[o,u]),f=e=>{if(e===d)return;let r=new URLSearchParams(t);r.set(`plate`,String(e)),n(r,{replace:!0})},p=(0,y.useMemo)(()=>{if(i)return s.data?.filament_colors;let e=u.find(e=>e.index===d)||u[0];if(!e?.filaments?.length)return;let t=[];for(let n of e.filaments){let e=Math.max(0,(n.slot_id??1)-1);n.color&&(t[e]=n.color)}return t.length>0?t:void 0},[i,s.data,u,d]),m=(0,y.useMemo)(()=>{let e=e=>o?`${e}?plate=${encodeURIComponent(o)}`:e;return i?e(Z.getArchiveGcode(Number(i))):a?e(Z.getLibraryFileGcodeUrl(Number(a))):null},[i,a,o]),h=()=>{window.history.length>1?e(-1):e(i?`/archives`:`/files`)},g=i?r(`gcodeViewer.backToArchives`,`Back to Archives`):r(`gcodeViewer.backToFiles`,`Back to File Manager`);return(0,G.jsxs)(`div`,{className:`flex flex-col min-h-[calc(100vh-64px)] lg:h-[calc(100vh-64px)]`,children:[(0,G.jsxs)(`div`,{className:`flex-shrink-0 px-4 py-2 border-b border-bambu-dark-tertiary flex flex-wrap items-center gap-x-4 gap-y-2`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:h,className:`inline-flex items-center gap-1.5 text-sm text-gray-700 dark:text-gray-300 hover:text-gray-900 dark:hover:text-white transition-colors`,children:[(0,G.jsx)(Lo,{className:`w-4 h-4`}),g]}),u.length>1&&(0,G.jsxs)(`div`,{className:`flex flex-wrap items-center gap-1.5`,children:[(0,G.jsx)(`span`,{className:`text-xs text-bambu-gray`,children:r(`gcodeViewer.plates`,`Plates`)}),u.map(e=>(0,G.jsx)(`button`,{type:`button`,onClick:()=>f(e.index),"aria-pressed":e.index===d,title:e.name??void 0,className:`px-2 py-0.5 rounded text-xs transition-colors ${e.index===d?`bg-bambu-green text-white`:`bg-bambu-dark-tertiary text-gray-700 dark:text-gray-300 hover:text-gray-900 dark:hover:text-white`}`,children:r(`gcodeViewer.plateN`,`Plate {{n}}`,{n:e.index})},e.index))]})]}),m?(0,G.jsx)(ST,{gcodeUrl:m,filamentColors:p,className:`flex-1 min-h-0`}):(0,G.jsx)(`div`,{className:`flex-1 flex items-center justify-center text-sm text-bambu-gray`,children:r(`gcodeViewer.noSource`,`No file was given to preview.`)})]})}var A0e=4401;function j0e(){let e=(0,y.useRef)(null),t=(0,y.useRef)(null),n=(0,y.useRef)(!1),r=co(),[i,a]=(0,y.useState)(!1),o=(0,y.useRef)(new Map),{showToast:s}=Gd(),{t:c}=U(),l=(0,y.useRef)(new Set),u=(0,y.useRef)(null),d=(0,y.useRef)(new Map),f=(0,y.useRef)(null),p=(0,y.useRef)([]),m=(0,y.useRef)(!1),h=(0,y.useRef)(()=>{}),g=(0,y.useCallback)(()=>{if(m.current||p.current.length===0)return;m.current=!0;let e=()=>{let t=p.current.shift();t?(h.current(t),p.current.length>0?setTimeout(e,16):m.current=!1):m.current=!1};e()},[]),_=(0,y.useCallback)(async()=>{if(n.current||e.current?.readyState===WebSocket.OPEN)return;let r;try{r=(await Z.getWebSocketToken()).token}catch(e){let t=e instanceof od?e.status:0;if(t===401||t===403)return}if(n.current)return;let i=window.location.protocol===`https:`?`wss:`:`ws:`,o=r?`?token=${encodeURIComponent(r)}`:``,s=`${i}//${window.location.host}/api/v1/ws${o}`,c=new WebSocket(s),l=null;c.onopen=()=>{console.log(`[WebSocket] Connected`),a(!0),l=window.setInterval(()=>{c.readyState===WebSocket.OPEN&&c.send(JSON.stringify({type:`ping`}))},3e4)},c.onmessage=e=>{try{let t=JSON.parse(e.data);t.type===`printer_status`&&t.printer_id!==void 0&&t.data?h.current(t):(p.current.push(t),g())}catch{}},c.onclose=r=>{console.log(`[WebSocket] Closed`,r.code,r.reason),l&&=(clearInterval(l),null),a(!1),e.current=null,!(n.current||r.code===A0e)&&(t.current=window.setTimeout(()=>{_()},3e3))},c.onerror=e=>{console.error(`[WebSocket] Error`,e),c.close()},e.current=c},[g]),v=(0,y.useCallback)(()=>{f.current&&=(clearTimeout(f.current),null);let e=new Map(d.current);d.current.clear(),e.forEach((e,t)=>{r.setQueryData([`printerStatus`,t],t=>{let n={...t,...e};return n.wifi_signal==null&&t?.wifi_signal!=null&&(n.wifi_signal=t.wifi_signal),n})})},[r]),b=(0,y.useCallback)((e,t)=>{let n=d.current.get(e)||{};if(d.current.set(e,{...n,...t}),document.hidden){v();return}f.current||=window.setTimeout(v,100)},[v]),x=(0,y.useCallback)(e=>{l.current.add(e),u.current&&clearTimeout(u.current),u.current=window.setTimeout(()=>{let e=Array.from(l.current);l.current.clear(),u.current=null;let t=0;e.forEach(e=>{setTimeout(()=>{r.invalidateQueries({queryKey:[e]})},t),t+=500})},3e3)},[r]),S=(0,y.useCallback)(()=>{r.invalidateQueries({queryKey:[`spool-assignments`]}),r.invalidateQueries({queryKey:[`spoolman-slot-assignments`]}),r.invalidateQueries({queryKey:[`slotPresets`]})},[r]),C=(0,y.useCallback)(e=>{switch(e.type){case`printer_status`:e.printer_id!==void 0&&e.data&&b(e.printer_id,e.data);break;case`print_start`:e.printer_id!==void 0&&r.invalidateQueries({queryKey:[`printerStatus`,e.printer_id]});break;case`missing_spool_assignment`:{if(e.printer_id===void 0||!Array.isArray(e.missing_slots))break;let t=e.missing_slots.map(e=>e&&typeof e.slot==`string`?e.slot:`Unknown`).filter(e=>e.length>0);if(t.length===0){o.current.delete(e.printer_id);break}let n=t.join(`|`);if(o.current.get(e.printer_id)===n)break;o.current.set(e.printer_id,n),s(c(`printers.toast.missingSpoolAssignment`,{printer:e.printer_name||`Printer ${e.printer_id}`,slots:t.join(`, `)}),`warning`);break}case`print_complete`:x(`archives`),x(`archiveStats`);break;case`kill_switch_triggered`:s(c(`printers.toast.killSwitchTriggered`,{printer:e.printer_name||`Printer ${e.printer_id??`?`}`,filename:e.filename||c(`common.unknown`)}),`error`);break;case`billing_charge_failed`:s(c(`printers.toast.billingChargeFailed`,{printer:e.printer_name||`Printer ${e.printer_id??`?`}`,filename:e.filename||c(`common.unknown`)}),`error`);break;case`archive_created`:x(`archives`),x(`archiveStats`);break;case`archive_updated`:x(`archives`);break;case`pong`:break;case`plate_not_empty`:window.dispatchEvent(new CustomEvent(`plate-not-empty`,{detail:{printer_id:e.printer_id,printer_name:e.printer_name,message:e.message}}));break;case`inventory_changed`:x(`inventory-spools`),x(`spoolman-inventory-spools`),x(T8[0]);break;case`spool_assignment_changed`:S();break;case`spool_assignment_verified`:{let t=e.printer_name||`Printer`,n=e.slot||`?`;e.verified?e.kprofile_applied===!1?s(c(`printers.toast.assignmentVerifiedNoKprofile`,{slot:n,printer:t}),`warning`):s(c(`printers.toast.assignmentVerified`,{slot:n,printer:t}),`success`):s(c(`printers.toast.assignmentNotConfirmed`,{slot:n,printer:t}),`warning`);break}case`spool_auto_assigned`:x(`inventory-spools`),S();break;case`spool_usage_logged`:x(`inventory-spools`);break;case`unknown_tag`:{let t=e;window.dispatchEvent(new CustomEvent(`unknown-tag`,{detail:{printer_id:t.printer_id,ams_id:t.ams_id,tray_id:t.tray_id,tag_uid:t.tag_uid,tray_uuid:t.tray_uuid,tray_type:t.tray_type,tray_color:t.tray_color,tray_sub_brands:t.tray_sub_brands,tray_count:t.tray_count}}));break}case`spoolbuddy_weight`:window.dispatchEvent(new CustomEvent(`spoolbuddy-weight`,{detail:e}));break;case`spoolbuddy_tag_matched`:window.dispatchEvent(new CustomEvent(`spoolbuddy-tag-matched`,{detail:e})),x(`inventory-spools`);break;case`spoolbuddy_unknown_tag`:window.dispatchEvent(new CustomEvent(`spoolbuddy-unknown-tag`,{detail:e}));break;case`spoolbuddy_tag_removed`:window.dispatchEvent(new CustomEvent(`spoolbuddy-tag-removed`,{detail:e}));break;case`spoolbuddy_tag_written`:window.dispatchEvent(new CustomEvent(`spoolbuddy-tag-written`,{detail:e})),x(`inventory-spools`);break;case`spoolbuddy_tag_write_failed`:window.dispatchEvent(new CustomEvent(`spoolbuddy-tag-write-failed`,{detail:e}));break;case`spoolbuddy_online`:window.dispatchEvent(new CustomEvent(`spoolbuddy-online`,{detail:e})),x(`spoolbuddy-devices`),x(`spoolbuddy-update-check`);break;case`spoolbuddy_offline`:window.dispatchEvent(new CustomEvent(`spoolbuddy-offline`,{detail:e})),x(`spoolbuddy-devices`);break;case`spoolbuddy_update`:x(`spoolbuddy-devices`),x(`spoolbuddy-update-check`);break;case`queue_item_uploading`:case`queue_item_upload_progress`:case`queue_item_acked`:case`queue_item_failed`:window.dispatchEvent(new CustomEvent(`bambuddy:dispatch-toast`,{detail:e}));break;case`pipeline_run_updated`:r.invalidateQueries({queryKey:[`pipeline-runs-all`]}),e.run?.pipeline_id&&r.invalidateQueries({queryKey:[`pipeline-runs`,e.run.pipeline_id]});break}},[r,x,S,b,s,c]);return(0,y.useEffect)(()=>{h.current=C},[C]),(0,y.useEffect)(()=>(n.current=!1,_(),()=>{n.current=!0,t.current&&clearTimeout(t.current),u.current&&clearTimeout(u.current),f.current&&clearTimeout(f.current),e.current&&e.current.close()}),[_]),{isConnected:i,sendMessage:(0,y.useCallback)(t=>{e.current?.readyState===WebSocket.OPEN&&e.current.send(JSON.stringify(t))},[])}}var M0e=`#00ae42`,N0e=e=>e!=null&&e>0?e:1/0;function P0e(e){let t=null;for(let n of e){if(!n||n.state!==`RUNNING`||n.progress==null)continue;if(t===null){t=n;continue}let e=N0e(n.remaining_time),r=N0e(t.remaining_time);(e<r||e===r&&(n.progress??0)>(t.progress??0))&&(t=n)}return t}function F0e(e){let t=document.createElement(`canvas`);t.width=32,t.height=32;let n=t.getContext(`2d`);if(!n)return null;let r=getComputedStyle(document.documentElement).getPropertyValue(`--accent`).trim()||M0e,i=Math.max(0,Math.min(100,e))/100,a=-Math.PI/2;return n.lineWidth=4,n.beginPath(),n.arc(16,16,13,0,Math.PI*2),n.strokeStyle=`rgba(128,128,128,0.3)`,n.stroke(),n.beginPath(),n.arc(16,16,13,a,a+i*Math.PI*2),n.strokeStyle=r,n.lineCap=`round`,n.stroke(),t.toDataURL(`image/png`)}function B9(e,t){document.querySelectorAll(`link[rel~="icon"]`).forEach(n=>{if(e)t.has(n)||t.set(n,n.href),n.href=e;else{let e=t.get(n);e!==void 0&&(n.href=e)}}),e||t.clear()}function I0e(){let{progressInTitle:e,resolvedMode:t,darkAccent:n,lightAccent:r}=Pd(),i=t===`dark`?n:r,{data:a}=K({queryKey:[`printers`],queryFn:Z.getPrinters,enabled:e}),o=Co({queries:(e?a??[]:[]).map(e=>({queryKey:[`printerStatus`,e.id],queryFn:()=>Z.getPrinterStatus(e.id)}))}),s=(0,y.useRef)(new Map),c=(0,y.useRef)(document.title),l=(0,y.useRef)(!1),u=e?P0e(o.map(e=>e.data)):null,d=u&&u.progress!=null?Math.round(u.progress):null;(0,y.useEffect)(()=>{e&&d!=null?(document.title=`${d}% · ${c.current}`,B9(F0e(d),s.current),l.current=!0):l.current&&=(document.title=c.current,B9(null,s.current),!1)},[e,d,i]),(0,y.useEffect)(()=>{let e=s.current,t=l,n=c.current;return()=>{t.current&&(document.title=n,B9(null,e))}},[])}function L0e({children:e}){let{authEnabled:t,user:n,loading:r}=jd(),{data:i}=K({queryKey:[`color-catalog-map`],queryFn:async()=>{let e=await Z.getColorNameMap();return{colors:e.colors,byMaterial:e.by_material??{}}},staleTime:1/0,gcTime:1/0,retry:2,enabled:!r&&(!t||n!==null)});return(0,y.useEffect)(()=>{i&&gf(i.colors,i.byMaterial)},[i]),(0,G.jsx)(G.Fragment,{children:e})}function R0e({selectedPrinterId:e,onPrinterChange:t,deviceOnline:n}){let{t:r}=U(),[i,a]=(0,y.useState)(new Date),{data:o=[]}=K({queryKey:[`printers`],queryFn:()=>Z.getPrinters()}),s=Co({queries:o.map(e=>({queryKey:[`printerStatus`,e.id],queryFn:()=>Z.getPrinterStatus(e.id),refetchInterval:1e4}))}),c=(0,y.useMemo)(()=>o.filter((e,t)=>s[t]?.data?.connected),[o,s]);(0,y.useEffect)(()=>{let n=c.some(t=>t.id===e);(!e||!n)&&c.length>0&&t(c[0].id)},[c,e,t]);let{data:l}=K({queryKey:[`settings`],queryFn:Z.getSettings});return(0,y.useEffect)(()=>{let e=setInterval(()=>a(new Date),1e3);return()=>clearInterval(e)},[]),(0,G.jsxs)(`div`,{className:`h-12 bg-bambu-dark-secondary border-b border-bambu-dark-tertiary flex items-center px-3 gap-4 shrink-0`,children:[(0,G.jsx)(`div`,{className:`flex items-center shrink-0`,children:(0,G.jsx)(`img`,{src:`/img/spoolbuddy_logo_dark_small.png`,alt:`SpoolBuddy`,width:113,height:28,className:`h-7 w-auto`})}),(0,G.jsx)(`div`,{className:`flex-1 flex justify-center`,children:(0,G.jsx)(`select`,{value:e??``,onChange:e=>t(Number(e.target.value)),className:`bg-bambu-dark text-white text-base px-4 py-2 rounded border border-bambu-dark-tertiary focus:outline-none focus:border-bambu-green min-w-[180px]`,children:c.length===0?(0,G.jsx)(`option`,{value:``,children:r(`spoolbuddy.status.noPrinters`,`No printers online`)}):c.map(e=>(0,G.jsx)(`option`,{value:e.id,children:e.name},e.id))})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3 shrink-0`,children:[(0,G.jsx)(`div`,{className:`flex items-center`,title:n?r(`spoolbuddy.status.backend`,`Backend`):r(`spoolbuddy.status.offline`,`Offline`),children:n?(0,G.jsx)(`div`,{className:`flex items-end gap-0.5 h-4`,children:[1,2,3,4].map(e=>(0,G.jsx)(`div`,{className:`w-1 rounded-sm ${e<=4?`bg-white`:`bg-bambu-dark-tertiary`}`,style:{height:`${e*4}px`}},e))}):(0,G.jsx)(Xu,{className:`w-5 h-5 text-red-400`})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(`div`,{className:`w-3 h-3 rounded-full ${n?`bg-bambu-green shadow-[0_0_6px_rgba(34,197,94,0.5)]`:`bg-bambu-gray`}`}),(0,G.jsx)(`span`,{className:`text-sm text-white/50`,children:n?r(`spoolbuddy.status.backend`,`Backend`):r(`spoolbuddy.status.offline`,`Offline`)})]}),(0,G.jsx)(`span`,{className:`text-white/50 text-base font-mono min-w-[50px] text-right`,children:ip(i,l?.time_format||`system`)})]})]})}var z0e=[{to:`/spoolbuddy`,labelKey:`spoolbuddy.nav.dashboard`,fallback:`Dashboard`,icon:(0,G.jsx)(`svg`,{className:`w-6 h-6`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:2,d:`M3 12l2-2m0 0l7-7 7 7M5 10v10a1 1 0 001 1h3m10-11l2 2m-2-2v10a1 1 0 01-1 1h-3m-6 0a1 1 0 001-1v-4a1 1 0 011-1h2a1 1 0 011 1v4a1 1 0 001 1m-6 0h6`})})},{to:`/spoolbuddy/ams`,labelKey:`spoolbuddy.nav.ams`,fallback:`AMS`,icon:(0,G.jsx)(`svg`,{className:`w-6 h-6`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:2,d:`M19 11H5m14 0a2 2 0 012 2v6a2 2 0 01-2 2H5a2 2 0 01-2-2v-6a2 2 0 012-2m14 0V9a2 2 0 00-2-2M5 11V9a2 2 0 012-2m0 0V5a2 2 0 012-2h6a2 2 0 012 2v2M7 7h10`})})},{to:`/spoolbuddy/write-tag`,labelKey:`spoolbuddy.nav.writeTag`,fallback:`Write`,icon:(0,G.jsxs)(`svg`,{className:`w-6 h-6`,viewBox:`0 0 24 24`,fill:`none`,stroke:`currentColor`,strokeWidth:2,children:[(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,d:`M8.288 15.038a5.25 5.25 0 017.424 0M5.106 11.856c3.807-3.808 9.98-3.808 13.788 0M1.924 8.674c5.565-5.565 14.587-5.565 20.152 0`}),(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,d:`M12.53 18.22l-.53.53-.53-.53a.75.75 0 011.06 0z`})]})},{to:`/spoolbuddy/inventory`,labelKey:`spoolbuddy.nav.inventory`,fallback:`Inventory`,icon:(0,G.jsx)(`svg`,{className:`w-6 h-6`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:2,d:`M20 7l-8-4-8 4m16 0l-8 4m8-4v10l-8 4m0-10L4 7m8 4v10M4 7v10l8 4`})})},{to:`/spoolbuddy/settings`,labelKey:`spoolbuddy.nav.settings`,fallback:`Settings`,icon:(0,G.jsxs)(`svg`,{className:`w-6 h-6`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:[(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:2,d:`M10.325 4.317c.426-1.756 2.924-1.756 3.35 0a1.724 1.724 0 002.573 1.066c1.543-.94 3.31.826 2.37 2.37a1.724 1.724 0 001.066 2.573c1.756.426 1.756 2.924 0 3.35a1.724 1.724 0 00-1.066 2.573c.94 1.543-.826 3.31-2.37 2.37a1.724 1.724 0 00-2.573 1.066c-.426 1.756-2.924 1.756-3.35 0a1.724 1.724 0 00-2.573-1.066c-1.543.94-3.31-.826-2.37-2.37a1.724 1.724 0 00-1.066-2.573c-1.756-.426-1.756-2.924 0-3.35a1.724 1.724 0 001.066-2.573c-.94-1.543.826-3.31 2.37-2.37.996.608 2.296.07 2.572-1.065z`}),(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:2,d:`M15 12a3 3 0 11-6 0 3 3 0 016 0z`})]})}];function B0e(){let{t:e}=U();return(0,G.jsx)(`nav`,{className:`h-14 bg-bambu-dark-secondary border-t border-bambu-dark-tertiary flex items-stretch shrink-0`,children:z0e.map(t=>(0,G.jsxs)(ji,{to:t.to,end:t.to===`/spoolbuddy`,className:({isActive:e})=>`flex-1 flex flex-col items-center justify-center gap-1 transition-colors ${e?`text-bambu-green bg-bambu-dark`:`text-white/50 hover:text-white/70 hover:bg-bambu-dark-tertiary`}`,children:[t.icon,(0,G.jsx)(`span`,{className:`text-xs font-medium`,children:e(t.labelKey,t.fallback)})]},t.to))})}function V0e({alert:e}){let{t}=U(),n=e?e.type===`error`?`bg-red-500`:e.type===`warning`?`bg-amber-500`:`bg-bambu-green`:`bg-bambu-green`;return(0,G.jsxs)(`div`,{className:`h-9 bg-bambu-dark-secondary border-t-2 ${e?e.type===`error`?`border-red-500`:e.type===`warning`?`border-amber-500`:`border-bambu-dark-tertiary`:`border-bambu-dark-tertiary`} flex items-center px-3 gap-3 shrink-0`,children:[(0,G.jsx)(`div`,{className:`w-3.5 h-3.5 rounded-full ${n}`}),(0,G.jsx)(`div`,{className:`flex-1 text-sm text-white/50 truncate`,children:e?(0,G.jsx)(`span`,{children:e.message}):(0,G.jsx)(`span`,{className:`text-bambu-green`,children:t(`spoolbuddy.status.systemReady`,`System Ready`)})})]})}function H0e({isOpen:e,onClose:t,deviceId:n,deviceOnline:r}){let{t:i}=U(),[a,o]=(0,y.useState)(null),[s,c]=(0,y.useState)(!1),[l,u]=(0,y.useState)(new Map),{data:d=[]}=K({queryKey:[`printers`],queryFn:()=>Z.getPrinters(),enabled:e}),{data:f=[]}=K({queryKey:[`smart-plugs`],queryFn:()=>Z.getSmartPlugs(),enabled:e}),p=d.map(e=>{let t=f.find(t=>t.printer_id===e.id&&t.plug_type!==`mqtt`&&t.enabled);if(!t)return null;let n=l.get(t.id);return{plug:t,printer:e,status:n?{state:n.state,reachable:!0,device_name:null,energy:null}:null,loading:n?.loading??!1}}).filter(Boolean);(0,y.useEffect)(()=>{!e||f.length===0||f.filter(e=>e.printer_id!==null&&e.plug_type!==`mqtt`&&e.enabled).forEach(async e=>{try{let t=await Z.getSmartPlugStatus(e.id);u(n=>{let r=new Map(n);return r.set(e.id,{loading:!1,state:t.state}),r})}catch{u(t=>{let n=new Map(t);return n.set(e.id,{loading:!1,state:null}),n})}})},[e,f]),(0,y.useEffect)(()=>{e||(o(null),c(!1))},[e]);let m=(0,y.useCallback)(async e=>{u(t=>{let n=new Map(t),r=n.get(e.id);return n.set(e.id,{loading:!0,state:r?.state??null}),n});try{await Z.controlSmartPlug(e.id,`toggle`);let t=await Z.getSmartPlugStatus(e.id);u(n=>{let r=new Map(n);return r.set(e.id,{loading:!1,state:t.state}),r})}catch{u(t=>{let n=new Map(t),r=n.get(e.id);return n.set(e.id,{loading:!1,state:r?.state??null}),n})}},[]),h=(0,y.useCallback)(async e=>{if(n){c(!0);try{await Dd.systemCommand(n,e),setTimeout(()=>t(),500)}catch{c(!1)}}},[n,t]),g=(0,y.useCallback)(()=>{a&&(a.type===`system`?h(a.command):m(a.plug),o(null))},[a,h,m]);if(!e)return null;let _=e=>e===`ON`||e===`on`;return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-40 bg-black/50`,onPointerDown:t}),(0,G.jsxs)(`div`,{className:`fixed top-0 left-0 right-0 z-50 bg-bambu-dark-secondary border-b border-bambu-dark-tertiary rounded-b-2xl shadow-2xl animate-slide-down`,children:[(0,G.jsx)(`div`,{className:`flex justify-center pt-2 pb-1`,children:(0,G.jsx)(`div`,{className:`w-10 h-1 rounded-full bg-zinc-600`})}),(0,G.jsxs)(`div`,{className:`px-4 pb-4 max-h-[80vh] overflow-y-auto`,children:[p.length>0&&(0,G.jsxs)(`div`,{className:`mb-4`,children:[(0,G.jsx)(`h3`,{className:`text-xs font-semibold text-zinc-500 uppercase tracking-wide mb-2`,children:i(`spoolbuddy.quickMenu.printerPower`,`Printer Power`)}),(0,G.jsx)(`div`,{className:`space-y-1`,children:p.map(({plug:e,printer:t,loading:n})=>{let r=l.get(e.id),i=_(r?.state??null);return(0,G.jsxs)(`button`,{onClick:()=>o({type:`plug`,plug:e,printer:t,currentState:r?.state??null}),disabled:n,className:`w-full flex items-center gap-2 px-3 py-1.5 rounded-lg bg-zinc-800/60 hover:bg-zinc-700/60 transition-colors min-h-[36px]`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full shrink-0 ${i?`bg-green-500`:`bg-zinc-600`}`}),n&&(0,G.jsx)(Y,{className:`w-3 h-3 animate-spin text-zinc-400 shrink-0`}),(0,G.jsx)(`span`,{className:`flex-1 text-sm text-zinc-200 text-left truncate`,children:t.name}),(0,G.jsx)(`span`,{className:`text-xs font-medium ${i?`text-green-400`:`text-zinc-500`}`,children:r?.state??`—`})]},e.id)})})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-xs font-semibold text-zinc-500 uppercase tracking-wide mb-2`,children:i(`spoolbuddy.quickMenu.systemControls`,`System`)}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2`,children:[(0,G.jsx)(V9,{icon:(0,G.jsx)(Wl,{className:`w-4 h-4`}),label:i(`spoolbuddy.quickMenu.restartDaemon`,`Restart Daemon`),onClick:()=>o({type:`system`,command:`restart_daemon`}),disabled:!n||!r||s}),(0,G.jsx)(V9,{icon:(0,G.jsx)(hl,{className:`w-4 h-4`}),label:i(`spoolbuddy.quickMenu.restartBrowser`,`Restart Browser`),onClick:()=>o({type:`system`,command:`restart_browser`}),disabled:!n||!r||s}),(0,G.jsx)(V9,{icon:(0,G.jsx)(Wl,{className:`w-4 h-4`}),label:i(`spoolbuddy.quickMenu.reboot`,`Reboot`),onClick:()=>o({type:`system`,command:`reboot`}),disabled:!n||!r||s,variant:`warning`}),(0,G.jsx)(V9,{icon:(0,G.jsx)(Fl,{className:`w-4 h-4`}),label:i(`spoolbuddy.quickMenu.shutdown`,`Shutdown`),onClick:()=>o({type:`system`,command:`shutdown`}),disabled:!n||!r||s,variant:`danger`})]})]}),(0,G.jsx)(`div`,{className:`flex justify-center mt-3`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-1 text-xs text-zinc-600`,children:[(0,G.jsx)(ps,{className:`w-3 h-3`}),(0,G.jsx)(`span`,{children:i(`spoolbuddy.quickMenu.swipeToClose`,`Swipe down to close`)})]})})]})]}),a&&(0,G.jsx)(`div`,{className:`fixed inset-0 z-[60] flex items-center justify-center bg-black/60`,children:(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-2xl p-5 mx-4 max-w-sm w-full border border-zinc-700`,children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-zinc-100 mb-2`,children:i(`spoolbuddy.quickMenu.confirmTitle`,`Confirm`)}),(0,G.jsx)(`p`,{className:`text-sm text-zinc-400 mb-5`,children:a.type===`plug`?_(a.currentState)?i(`spoolbuddy.quickMenu.confirmPlugOff`,`Turn off {{name}}?`,{name:a.printer.name}):i(`spoolbuddy.quickMenu.confirmPlugOn`,`Turn on {{name}}?`,{name:a.printer.name}):a.command===`shutdown`?i(`spoolbuddy.quickMenu.confirmShutdown`,`Are you sure you want to shut down the SpoolBuddy? You will need physical access to turn it back on.`):a.command===`reboot`?i(`spoolbuddy.quickMenu.confirmReboot`,`Are you sure you want to reboot the SpoolBuddy?`):a.command===`restart_daemon`?i(`spoolbuddy.quickMenu.confirmRestartDaemon`,`Restart the SpoolBuddy daemon? NFC and scale will be temporarily unavailable.`):i(`spoolbuddy.quickMenu.confirmRestartBrowser`,`Restart the kiosk browser? The display will briefly go blank.`)}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(`button`,{onClick:()=>o(null),className:`flex-1 px-4 py-2.5 rounded-lg text-sm font-medium bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors min-h-[44px]`,children:i(`common.cancel`,`Cancel`)}),(0,G.jsx)(`button`,{onClick:g,disabled:s,className:`flex-1 px-4 py-2.5 rounded-lg text-sm font-medium text-white transition-colors min-h-[44px] ${a.type===`plug`?_(a.currentState)?`bg-red-600 hover:bg-red-700`:`bg-green-600 hover:bg-green-700`:a.command===`shutdown`?`bg-red-600 hover:bg-red-700`:a.command===`reboot`?`bg-amber-600 hover:bg-amber-700`:`bg-blue-600 hover:bg-blue-700`} disabled:opacity-50`,children:s?(0,G.jsx)(Y,{className:`w-4 h-4 animate-spin mx-auto`}):a.type===`plug`?_(a.currentState)?i(`spoolbuddy.quickMenu.turnOff`,`Turn Off`):i(`spoolbuddy.quickMenu.turnOn`,`Turn On`):i(`spoolbuddy.quickMenu.confirm`,`Confirm`)})]})]})})]})}function V9({icon:e,label:t,onClick:n,disabled:r,variant:i=`default`}){return(0,G.jsxs)(`button`,{onClick:n,disabled:r,className:`flex items-center gap-2.5 p-3 rounded-xl transition-colors min-h-[48px] disabled:opacity-40 ${{default:`bg-zinc-800/60 hover:bg-zinc-700/60 text-zinc-300`,warning:`bg-amber-900/30 hover:bg-amber-900/50 text-amber-400`,danger:`bg-red-900/30 hover:bg-red-900/50 text-red-400`}[i]}`,children:[e,(0,G.jsx)(`span`,{className:`text-sm font-medium`,children:t})]})}var U0e={weight:null,weightStable:!1,rawAdc:null,matchedSpool:null,unknownTagUid:null,unknownTrayUuid:null,deviceOnline:!1,deviceId:null};function W0e(e,t){switch(t.type){case`WEIGHT_UPDATE`:return{...e,weight:t.weight,weightStable:t.stable,rawAdc:t.rawAdc,deviceId:t.deviceId,deviceOnline:!0};case`TAG_MATCHED`:return{...e,matchedSpool:t.spool,unknownTagUid:null,unknownTrayUuid:null,deviceId:t.deviceId};case`UNKNOWN_TAG`:return{...e,matchedSpool:null,unknownTagUid:t.tagUid,unknownTrayUuid:t.trayUuid??null,deviceId:t.deviceId};case`TAG_REMOVED`:return{...e,matchedSpool:null,unknownTagUid:null,unknownTrayUuid:null};case`DEVICE_ONLINE`:return{...e,deviceOnline:!0,deviceId:t.deviceId};case`DEVICE_OFFLINE`:return{...e,deviceOnline:!1,weight:null,weightStable:!1,rawAdc:null};default:return e}}function G0e(){let[e,t]=(0,y.useReducer)(W0e,U0e),n=(0,y.useCallback)(e=>{let n=e.detail;t({type:`WEIGHT_UPDATE`,weight:n.weight_grams??n.data?.weight_grams,stable:n.stable??n.data?.stable??!1,rawAdc:n.raw_adc??n.data?.raw_adc??null,deviceId:n.device_id??n.data?.device_id??``})},[]),r=(0,y.useCallback)(e=>{let n=e.detail,r=n.spool??n.data?.spool;r&&t({type:`TAG_MATCHED`,spool:{id:r.id,tag_uid:n.tag_uid??n.data?.tag_uid??``,material:r.material??``,subtype:r.subtype??null,color_name:r.color_name??null,color_name_is_synthesized:r.color_name_is_synthesized??!1,rgba:r.rgba??null,brand:r.brand??null,label_weight:r.label_weight??0,core_weight:r.core_weight??0,weight_used:r.weight_used??0},deviceId:n.device_id??n.data?.device_id??``})},[]),i=(0,y.useCallback)(e=>{let n=e.detail;t({type:`UNKNOWN_TAG`,tagUid:n.tag_uid??n.data?.tag_uid??``,trayUuid:n.tray_uuid??n.data?.tray_uuid??null,deviceId:n.device_id??n.data?.device_id??``})},[]),a=(0,y.useCallback)(e=>{let n=e.detail;t({type:`TAG_REMOVED`,deviceId:n.device_id??n.data?.device_id??``})},[]),o=(0,y.useCallback)(e=>{let n=e.detail;t({type:`DEVICE_ONLINE`,deviceId:n.device_id??n.data?.device_id??``})},[]),s=(0,y.useCallback)(e=>{let n=e.detail;t({type:`DEVICE_OFFLINE`,deviceId:n.device_id??n.data?.device_id??``})},[]);(0,y.useEffect)(()=>(window.addEventListener(`spoolbuddy-weight`,n),window.addEventListener(`spoolbuddy-tag-matched`,r),window.addEventListener(`spoolbuddy-unknown-tag`,i),window.addEventListener(`spoolbuddy-tag-removed`,a),window.addEventListener(`spoolbuddy-online`,o),window.addEventListener(`spoolbuddy-offline`,s),()=>{window.removeEventListener(`spoolbuddy-weight`,n),window.removeEventListener(`spoolbuddy-tag-matched`,r),window.removeEventListener(`spoolbuddy-unknown-tag`,i),window.removeEventListener(`spoolbuddy-tag-removed`,a),window.removeEventListener(`spoolbuddy-online`,o),window.removeEventListener(`spoolbuddy-offline`,s)}),[n,r,i,a,o,s]);let c=e.matchedSpool?Math.max(0,e.matchedSpool.label_weight-e.matchedSpool.weight_used):null,l=e.weight!==null&&e.matchedSpool?Math.max(0,e.weight-e.matchedSpool.core_weight):null;return{...e,remainingWeight:c,netWeight:l}}var K0e=l(o(((e,t)=>{(function(n,r){typeof e==`object`&&typeof t==`object`?t.exports=r(f()):typeof define==`function`&&define.amd?define([`react`],r):typeof e==`object`?e.ReactSimpleKeyboard=r(f()):n.ReactSimpleKeyboard=r(n.React)})(e,(function(e){return function(){var t={981:function(){typeof Element>`u`||`remove`in Element.prototype||(Element.prototype.remove=function(){this.parentNode&&this.parentNode.removeChild(this)}),typeof self<`u`&&`document`in self&&((!(`classList`in document.createElement(`_`))||document.createElementNS&&!(`classList`in document.createElementNS(`http://www.w3.org/2000/svg`,`g`)))&&function(e){if(`Element`in e){var t=`classList`,n=`prototype`,r=e.Element[n],i=Object,a=String[n].trim||function(){return this.replace(/^\s+|\s+$/g,``)},o=Array[n].indexOf||function(e){for(var t=0,n=this.length;t<n;t++)if(t in this&&this[t]===e)return t;return-1},s=function(e,t){this.name=e,this.code=DOMException[e],this.message=t},c=function(e,t){if(t===``)throw new s(`SYNTAX_ERR`,`The token must not be empty.`);if(/\s/.test(t))throw new s(`INVALID_CHARACTER_ERR`,`The token must not contain space characters.`);return o.call(e,t)},l=function(e){for(var t=a.call(e.getAttribute(`class`)||``),n=t?t.split(/\s+/):[],r=0,i=n.length;r<i;r++)this.push(n[r]);this._updateClassName=function(){e.setAttribute(`class`,this.toString())}},u=l[n]=[],d=function(){return new l(this)};if(s[n]=Error[n],u.item=function(e){return this[e]||null},u.contains=function(e){return~c(this,e+``)},u.add=function(){var e,t=arguments,n=0,r=t.length,i=!1;do~c(this,e=t[n]+``)||(this.push(e),i=!0);while(++n<r);i&&this._updateClassName()},u.remove=function(){var e,t,n=arguments,r=0,i=n.length,a=!1;do for(t=c(this,e=n[r]+``);~t;)this.splice(t,1),a=!0,t=c(this,e);while(++r<i);a&&this._updateClassName()},u.toggle=function(e,t){var n=this.contains(e),r=n?!0!==t&&`remove`:!1!==t&&`add`;return r&&this[r](e),!0===t||!1===t?t:!n},u.replace=function(e,t){var n=c(e+``);~n&&(this.splice(n,1,t),this._updateClassName())},u.toString=function(){return this.join(` `)},i.defineProperty){var f={get:d,enumerable:!0,configurable:!0};try{i.defineProperty(r,t,f)}catch(e){e.number!==void 0&&e.number!==-2146823252||(f.enumerable=!1,i.defineProperty(r,t,f))}}else i[n].__defineGetter__&&r.__defineGetter__(t,d)}}(self),function(){var e=document.createElement(`_`);if(e.classList.add(`c1`,`c2`),!e.classList.contains(`c2`)){var t=function(e){var t=DOMTokenList.prototype[e];DOMTokenList.prototype[e]=function(e){var n,r=arguments.length;for(n=0;n<r;n++)e=arguments[n],t.call(this,e)}};t(`add`),t(`remove`)}if(e.classList.toggle(`c3`,!1),e.classList.contains(`c3`)){var n=DOMTokenList.prototype.toggle;DOMTokenList.prototype.toggle=function(e,t){return 1 in arguments&&!this.contains(e)==!t?t:n.call(this,e)}}`replace`in document.createElement(`_`).classList||(DOMTokenList.prototype.replace=function(e,t){var n=this.toString().split(` `),r=n.indexOf(e+``);~r&&(n=n.slice(r),this.remove.apply(this,n),this.add(t),this.add.apply(this,n.slice(1)))}),e=null}())},548:function(e){e.exports=function(){var e={9306:function(e,t,n){var r=n(4901),i=n(6823),a=TypeError;e.exports=function(e){if(r(e))return e;throw new a(i(e)+` is not a function`)}},5548:function(e,t,n){var r=n(3517),i=n(6823),a=TypeError;e.exports=function(e){if(r(e))return e;throw new a(i(e)+` is not a constructor`)}},3506:function(e,t,n){var r=n(3925),i=String,a=TypeError;e.exports=function(e){if(r(e))return e;throw new a(`Can't set `+i(e)+` as a prototype`)}},6469:function(e,t,n){var r=n(8227),i=n(2360),a=n(4913).f,o=r(`unscopables`),s=Array.prototype;s[o]===void 0&&a(s,o,{configurable:!0,value:i(null)}),e.exports=function(e){s[o][e]=!0}},7829:function(e,t,n){var r=n(8183).charAt;e.exports=function(e,t,n){return t+(n?r(e,t).length:1)}},8551:function(e,t,n){var r=n(34),i=String,a=TypeError;e.exports=function(e){if(r(e))return e;throw new a(i(e)+` is not an object`)}},235:function(e,t,n){var r=n(9213).forEach;e.exports=n(4598)(`forEach`)?[].forEach:function(e){return r(this,e,arguments.length>1?arguments[1]:void 0)}},7916:function(e,t,n){var r=n(6080),i=n(9565),a=n(8981),o=n(6319),s=n(4209),c=n(3517),l=n(6198),u=n(4659),d=n(4527),f=n(81),p=n(851),m=Array;e.exports=function(e){var t=a(e),n=c(this),h=arguments.length,g=h>1?arguments[1]:void 0,_=g!==void 0;_&&(g=r(g,h>2?arguments[2]:void 0));var v,y,b,x,S,C,w=p(t),T=0;if(!w||this===m&&s(w))for(v=l(t),y=n?new this(v):m(v);v>T;T++)C=_?g(t[T],T):t[T],u(y,T,C);else for(y=n?new this:[],S=(x=f(t,w)).next;!(b=i(S,x)).done;T++)C=_?o(x,g,[b.value,T],!0):b.value,u(y,T,C);return d(y,T),y}},9617:function(e,t,n){var r=n(5397),i=n(5610),a=n(6198),o=function(e){return function(t,n,o){var s=r(t),c=a(s);if(c===0)return!e&&-1;var l,u=i(o,c);if(e&&n!=n){for(;c>u;)if((l=s[u++])!=l)return!0}else for(;c>u;u++)if((e||u in s)&&s[u]===n)return e||u||0;return!e&&-1}};e.exports={includes:o(!0),indexOf:o(!1)}},9213:function(e,t,n){var r=n(6080),i=n(7055),a=n(8981),o=n(6198),s=n(1469),c=n(4659),l=function(e){var t=e===1,n=e===2,l=e===3,u=e===4,d=e===6,f=e===7,p=e===5||d;return function(m,h,g){for(var _,v,y=a(m),b=i(y),x=o(b),S=r(h,g),C=0,w=0,T=t?s(m,x):n||f?s(m,0):void 0;x>C;C++)if((p||C in b)&&(v=S(_=b[C],C,y),e))if(t)c(T,C,v);else if(v)switch(e){case 3:return!0;case 5:return _;case 6:return C;case 2:c(T,w++,_)}else switch(e){case 4:return!1;case 7:c(T,w++,_)}return d?-1:l||u?u:T}};e.exports={forEach:l(0),map:l(1),filter:l(2),some:l(3),every:l(4),find:l(5),findIndex:l(6),filterReject:l(7)}},597:function(e,t,n){var r=n(9039),i=n(8227),a=n(9519),o=i(`species`);e.exports=function(e){return a>=51||!r((function(){var t=[];return(t.constructor={})[o]=function(){return{foo:1}},t[e](Boolean).foo!==1}))}},4598:function(e,t,n){var r=n(9039);e.exports=function(e,t){var n=[][e];return!!n&&r((function(){n.call(null,t||function(){return 1},1)}))}},926:function(e,t,n){var r=n(9306),i=n(8981),a=n(7055),o=n(6198),s=TypeError,c=`Reduce of empty array with no initial value`,l=function(e){return function(t,n,l,u){var d=i(t),f=a(d),p=o(d);if(r(n),p===0&&l<2)throw new s(c);var m=e?p-1:0,h=e?-1:1;if(l<2)for(;;){if(m in f){u=f[m],m+=h;break}if(m+=h,e?m<0:p<=m)throw new s(c)}for(;e?m>=0:p>m;m+=h)m in f&&(u=n(u,f[m],m,d));return u}};e.exports={left:l(!1),right:l(!0)}},4527:function(e,t,n){var r=n(3724),i=n(4376),a=TypeError,o=Object.getOwnPropertyDescriptor;e.exports=r&&!function(){if(this!==void 0)return!0;try{Object.defineProperty([],"length",{writable:!1}).length=1}catch(e){return e instanceof TypeError}}()?function(e,t){if(i(e)&&!o(e,`length`).writable)throw new a(`Cannot set read only .length`);return e.length=t}:function(e,t){return e.length=t}},7680:function(e,t,n){e.exports=n(9504)([].slice)},4488:function(e,t,n){var r=n(7680),i=Math.floor,a=function(e,t){var n=e.length;if(n<8)for(var o,s,c=1;c<n;){for(s=c,o=e[c];s&&t(e[s-1],o)>0;)e[s]=e[--s];s!==c++&&(e[s]=o)}else for(var l=i(n/2),u=a(r(e,0,l),t),d=a(r(e,l),t),f=u.length,p=d.length,m=0,h=0;m<f||h<p;)e[m+h]=m<f&&h<p?t(u[m],d[h])<=0?u[m++]:d[h++]:m<f?u[m++]:d[h++];return e};e.exports=a},7433:function(e,t,n){var r=n(4376),i=n(3517),a=n(34),o=n(8227)(`species`),s=Array;e.exports=function(e){var t;return r(e)&&(t=e.constructor,(i(t)&&(t===s||r(t.prototype))||a(t)&&(t=t[o])===null)&&(t=void 0)),t===void 0?s:t}},1469:function(e,t,n){var r=n(7433);e.exports=function(e,t){return new(r(e))(t===0?0:t)}},6319:function(e,t,n){var r=n(8551),i=n(9539);e.exports=function(e,t,n,a){try{return a?t(r(n)[0],n[1]):t(n)}catch(t){i(e,`throw`,t)}}},4428:function(e,t,n){var r=n(8227)(`iterator`),i=!1;try{var a=0,o={next:function(){return{done:!!a++}},return:function(){i=!0}};o[r]=function(){return this},Array.from(o,(function(){throw 2}))}catch{}e.exports=function(e,t){try{if(!t&&!i)return!1}catch{return!1}var n=!1;try{var a={};a[r]=function(){return{next:function(){return{done:n=!0}}}},e(a)}catch{}return n}},2195:function(e,t,n){var r=n(9504),i=r({}.toString),a=r(``.slice);e.exports=function(e){return a(i(e),8,-1)}},6955:function(e,t,n){var r=n(2140),i=n(4901),a=n(2195),o=n(8227)(`toStringTag`),s=Object,c=a(function(){return arguments}())===`Arguments`;e.exports=r?a:function(e){var t,n,r;return e===void 0?`Undefined`:e===null?`Null`:typeof(n=function(e,t){try{return e[t]}catch{}}(t=s(e),o))==`string`?n:c?a(t):(r=a(t))===`Object`&&i(t.callee)?`Arguments`:r}},7740:function(e,t,n){var r=n(9297),i=n(5031),a=n(7347),o=n(4913);e.exports=function(e,t,n){for(var s=i(t),c=o.f,l=a.f,u=0;u<s.length;u++){var d=s[u];r(e,d)||n&&r(n,d)||c(e,d,l(t,d))}}},1436:function(e,t,n){var r=n(8227)(`match`);e.exports=function(e){var t=/./;try{`/./`[e](t)}catch{try{return t[r]=!1,`/./`[e](t)}catch{}}return!1}},2211:function(e,t,n){e.exports=!n(9039)((function(){function e(){}return e.prototype.constructor=null,Object.getPrototypeOf(new e)!==e.prototype}))},2529:function(e){e.exports=function(e,t){return{value:e,done:t}}},6699:function(e,t,n){var r=n(3724),i=n(4913),a=n(6980);e.exports=r?function(e,t,n){return i.f(e,t,a(1,n))}:function(e,t,n){return e[t]=n,e}},6980:function(e){e.exports=function(e,t){return{enumerable:!(1&e),configurable:!(2&e),writable:!(4&e),value:t}}},4659:function(e,t,n){var r=n(3724),i=n(4913),a=n(6980);e.exports=function(e,t,n){r?i.f(e,t,a(0,n)):e[t]=n}},3640:function(e,t,n){var r=n(8551),i=n(4270),a=TypeError;e.exports=function(e){if(r(this),e===`string`||e==="default")e=`string`;else if(e!==`number`)throw new a(`Incorrect hint`);return i(this,e)}},2106:function(e,t,n){var r=n(283),i=n(4913);e.exports=function(e,t,n){return n.get&&r(n.get,t,{getter:!0}),n.set&&r(n.set,t,{setter:!0}),i.f(e,t,n)}},6840:function(e,t,n){var r=n(4901),i=n(4913),a=n(283),o=n(9433);e.exports=function(e,t,n,s){s||={};var c=s.enumerable,l=s.name===void 0?t:s.name;if(r(n)&&a(n,l,s),s.global)c?e[t]=n:o(t,n);else{try{s.unsafe?e[t]&&(c=!0):delete e[t]}catch{}c?e[t]=n:i.f(e,t,{value:n,enumerable:!1,configurable:!s.nonConfigurable,writable:!s.nonWritable})}return e}},9433:function(e,t,n){var r=n(4576),i=Object.defineProperty;e.exports=function(e,t){try{i(r,e,{value:t,configurable:!0,writable:!0})}catch{r[e]=t}return t}},4606:function(e,t,n){var r=n(6823),i=TypeError;e.exports=function(e,t){if(!delete e[t])throw new i(`Cannot delete property `+r(t)+` of `+r(e))}},3724:function(e,t,n){e.exports=!n(9039)((function(){return Object.defineProperty({},1,{get:function(){return 7}})[1]!==7}))},4055:function(e,t,n){var r=n(4576),i=n(34),a=r.document,o=i(a)&&i(a.createElement);e.exports=function(e){return o?a.createElement(e):{}}},6837:function(e){var t=TypeError;e.exports=function(e){if(e>9007199254740991)throw t(`Maximum allowed index exceeded`);return e}},7400:function(e){e.exports={CSSRuleList:0,CSSStyleDeclaration:0,CSSValueList:0,ClientRectList:0,DOMRectList:0,DOMStringList:0,DOMTokenList:1,DataTransferItemList:0,FileList:0,HTMLAllCollection:0,HTMLCollection:0,HTMLFormElement:0,HTMLSelectElement:0,MediaList:0,MimeTypeArray:0,NamedNodeMap:0,NodeList:1,PaintRequestList:0,Plugin:0,PluginArray:0,SVGLengthList:0,SVGNumberList:0,SVGPathSegList:0,SVGPointList:0,SVGStringList:0,SVGTransformList:0,SourceBufferList:0,StyleSheetList:0,TextTrackCueList:0,TextTrackList:0,TouchList:0}},9296:function(e,t,n){var r=n(4055)(`span`).classList,i=r&&r.constructor&&r.constructor.prototype;e.exports=i===Object.prototype?void 0:i},8727:function(e){e.exports=[`constructor`,`hasOwnProperty`,`isPrototypeOf`,`propertyIsEnumerable`,`toLocaleString`,`toString`,`valueOf`]},3709:function(e,t,n){var r=n(2839).match(/firefox\/(\d+)/i);e.exports=!!r&&+r[1]},3763:function(e,t,n){var r=n(2839);e.exports=/MSIE|Trident/.test(r)},6193:function(e,t,n){e.exports=n(4215)===`NODE`},2839:function(e,t,n){var r=n(4576).navigator,i=r&&r.userAgent;e.exports=i?String(i):``},9519:function(e,t,n){var r,i,a=n(4576),o=n(2839),s=a.process,c=a.Deno,l=s&&s.versions||c&&c.version,u=l&&l.v8;u&&(i=(r=u.split(`.`))[0]>0&&r[0]<4?1:+(r[0]+r[1])),!i&&o&&(!(r=o.match(/Edge\/(\d+)/))||r[1]>=74)&&(r=o.match(/Chrome\/(\d+)/))&&(i=+r[1]),e.exports=i},3607:function(e,t,n){var r=n(2839).match(/AppleWebKit\/(\d+)\./);e.exports=!!r&&+r[1]},4215:function(e,t,n){var r=n(4576),i=n(2839),a=n(2195),o=function(e){return i.slice(0,e.length)===e};e.exports=o(`Bun/`)?`BUN`:o(`Cloudflare-Workers`)?`CLOUDFLARE`:o(`Deno/`)?`DENO`:o(`Node.js/`)?`NODE`:r.Bun&&typeof Bun.version==`string`?`BUN`:r.Deno&&typeof Deno.version==`object`?`DENO`:a(r.process)===`process`?`NODE`:r.window&&r.document?`BROWSER`:`REST`},6518:function(e,t,n){var r=n(4576),i=n(7347).f,a=n(6699),o=n(6840),s=n(9433),c=n(7740),l=n(2796);e.exports=function(e,t){var n,u,d,f,p,m=e.target,h=e.global,g=e.stat;if(n=h?r:g?r[m]||s(m,{}):r[m]&&r[m].prototype)for(u in t){if(f=t[u],d=e.dontCallGetSet?(p=i(n,u))&&p.value:n[u],!l(h?u:m+(g?`.`:`#`)+u,e.forced)&&d!==void 0){if(typeof f==typeof d)continue;c(f,d)}(e.sham||d&&d.sham)&&a(f,`sham`,!0),o(n,u,f,e)}}},9039:function(e){e.exports=function(e){try{return!!e()}catch{return!0}}},9228:function(e,t,n){n(7495);var r=n(9565),i=n(6840),a=n(7323),o=n(9039),s=n(8227),c=n(6699),l=s(`species`),u=RegExp.prototype;e.exports=function(e,t,n,d){var f=s(e),p=!o((function(){var t={};return t[f]=function(){return 7},``[e](t)!==7})),m=p&&!o((function(){var t=!1,n=/a/;if(e===`split`){var r={};r[l]=function(){return n},(n={constructor:r,flags:``})[f]=/./[f]}return n.exec=function(){return t=!0,null},n[f](``),!t}));if(!p||!m||n){var h=/./[f],g=t(f,``[e],(function(e,t,n,i,o){var s=t.exec;return s===a||s===u.exec?p&&!o?{done:!0,value:r(h,t,n,i)}:{done:!0,value:r(e,n,t,i)}:{done:!1}}));i(String.prototype,e,g[0]),i(u,f,g[1])}d&&c(u[f],`sham`,!0)}},8745:function(e,t,n){var r=n(616),i=Function.prototype,a=i.apply,o=i.call;e.exports=typeof Reflect==`object`&&Reflect.apply||(r?o.bind(a):function(){return o.apply(a,arguments)})},6080:function(e,t,n){var r=n(7476),i=n(9306),a=n(616),o=r(r.bind);e.exports=function(e,t){return i(e),t===void 0?e:a?o(e,t):function(){return e.apply(t,arguments)}}},616:function(e,t,n){e.exports=!n(9039)((function(){var e=function(){}.bind();return typeof e!=`function`||e.hasOwnProperty(`prototype`)}))},566:function(e,t,n){var r=n(9504),i=n(9306),a=n(34),o=n(9297),s=n(7680),c=n(616),l=Function,u=r([].concat),d=r([].join),f={};e.exports=c?l.bind:function(e){var t=i(this),n=t.prototype,r=s(arguments,1),c=function(){var n=u(r,s(arguments));return this instanceof c?function(e,t,n){if(!o(f,t)){for(var r=[],i=0;i<t;i++)r[i]=`a[`+i+`]`;f[t]=l(`C,a`,`return new C(`+d(r,`,`)+`)`)}return f[t](e,n)}(t,n.length,n):t.apply(e,n)};return a(n)&&(c.prototype=n),c}},9565:function(e,t,n){var r=n(616),i=Function.prototype.call;e.exports=r?i.bind(i):function(){return i.apply(i,arguments)}},350:function(e,t,n){var r=n(3724),i=n(9297),a=Function.prototype,o=r&&Object.getOwnPropertyDescriptor,s=i(a,`name`);e.exports={EXISTS:s,PROPER:s&&function(){}.name===`something`,CONFIGURABLE:s&&(!r||r&&o(a,`name`).configurable)}},6706:function(e,t,n){var r=n(9504),i=n(9306);e.exports=function(e,t,n){try{return r(i(Object.getOwnPropertyDescriptor(e,t)[n]))}catch{}}},7476:function(e,t,n){var r=n(2195),i=n(9504);e.exports=function(e){if(r(e)===`Function`)return i(e)}},9504:function(e,t,n){var r=n(616),i=Function.prototype,a=i.call,o=r&&i.bind.bind(a,a);e.exports=r?o:function(e){return function(){return a.apply(e,arguments)}}},7751:function(e,t,n){var r=n(4576),i=n(4901);e.exports=function(e,t){return arguments.length<2?(n=r[e],i(n)?n:void 0):r[e]&&r[e][t];var n}},851:function(e,t,n){var r=n(6955),i=n(5966),a=n(4117),o=n(6269),s=n(8227)(`iterator`);e.exports=function(e){if(!a(e))return i(e,s)||i(e,`@@iterator`)||o[r(e)]}},81:function(e,t,n){var r=n(9565),i=n(9306),a=n(8551),o=n(6823),s=n(851),c=TypeError;e.exports=function(e,t){var n=arguments.length<2?s(e):t;if(i(n))return a(r(n,e));throw new c(o(e)+` is not iterable`)}},5966:function(e,t,n){var r=n(9306),i=n(4117);e.exports=function(e,t){var n=e[t];return i(n)?void 0:r(n)}},2478:function(e,t,n){var r=n(9504),i=n(8981),a=Math.floor,o=r(``.charAt),s=r(``.replace),c=r(``.slice),l=/\$([$&'`]|\d{1,2}|<[^>]*>)/g,u=/\$([$&'`]|\d{1,2})/g;e.exports=function(e,t,n,r,d,f){var p=n+e.length,m=r.length,h=u;return d!==void 0&&(d=i(d),h=l),s(f,h,(function(i,s){var l;switch(o(s,0)){case`$`:return`$`;case`&`:return e;case"`":return c(t,0,n);case`'`:return c(t,p);case`<`:l=d[c(s,1,-1)];break;default:var u=+s;if(u===0)return i;if(u>m){var f=a(u/10);return f===0?i:f<=m?r[f-1]===void 0?o(s,1):r[f-1]+o(s,1):i}l=r[u-1]}return l===void 0?``:l}))}},4576:function(e,t,n){var r=function(e){return e&&e.Math===Math&&e};e.exports=r(typeof globalThis==`object`&&globalThis)||r(typeof window==`object`&&window)||r(typeof self==`object`&&self)||r(typeof n.g==`object`&&n.g)||r(typeof this==`object`&&this)||function(){return this}()||Function(`return this`)()},9297:function(e,t,n){var r=n(9504),i=n(8981),a=r({}.hasOwnProperty);e.exports=Object.hasOwn||function(e,t){return a(i(e),t)}},421:function(e){e.exports={}},397:function(e,t,n){e.exports=n(7751)(`document`,`documentElement`)},5917:function(e,t,n){var r=n(3724),i=n(9039),a=n(4055);e.exports=!r&&!i((function(){return Object.defineProperty(a(`div`),"a",{get:function(){return 7}}).a!==7}))},7055:function(e,t,n){var r=n(9504),i=n(9039),a=n(2195),o=Object,s=r(``.split);e.exports=i((function(){return!o(`z`).propertyIsEnumerable(0)}))?function(e){return a(e)===`String`?s(e,``):o(e)}:o},3167:function(e,t,n){var r=n(4901),i=n(34),a=n(2967);e.exports=function(e,t,n){var o,s;return a&&r(o=t.constructor)&&o!==n&&i(s=o.prototype)&&s!==n.prototype&&a(e,s),e}},3706:function(e,t,n){var r=n(9504),i=n(4901),a=n(7629),o=r(Function.toString);i(a.inspectSource)||(a.inspectSource=function(e){return o(e)}),e.exports=a.inspectSource},1181:function(e,t,n){var r,i,a,o=n(8622),s=n(4576),c=n(34),l=n(6699),u=n(9297),d=n(7629),f=n(6119),p=n(421),m=`Object already initialized`,h=s.TypeError,g=s.WeakMap;if(o||d.state){var _=d.state||=new g;_.get=_.get,_.has=_.has,_.set=_.set,r=function(e,t){if(_.has(e))throw new h(m);return t.facade=e,_.set(e,t),t},i=function(e){return _.get(e)||{}},a=function(e){return _.has(e)}}else{var v=f(`state`);p[v]=!0,r=function(e,t){if(u(e,v))throw new h(m);return t.facade=e,l(e,v,t),t},i=function(e){return u(e,v)?e[v]:{}},a=function(e){return u(e,v)}}e.exports={set:r,get:i,has:a,enforce:function(e){return a(e)?i(e):r(e,{})},getterFor:function(e){return function(t){var n;if(!c(t)||(n=i(t)).type!==e)throw new h(`Incompatible receiver, `+e+` required`);return n}}}},4209:function(e,t,n){var r=n(8227),i=n(6269),a=r(`iterator`),o=Array.prototype;e.exports=function(e){return e!==void 0&&(i.Array===e||o[a]===e)}},4376:function(e,t,n){var r=n(2195);e.exports=Array.isArray||function(e){return r(e)===`Array`}},4901:function(e){var t=typeof document==`object`&&document.all;e.exports=t===void 0&&t!==void 0?function(e){return typeof e==`function`||e===t}:function(e){return typeof e==`function`}},3517:function(e,t,n){var r=n(9504),i=n(9039),a=n(4901),o=n(6955),s=n(7751),c=n(3706),l=function(){},u=s(`Reflect`,`construct`),d=/^\s*(?:class|function)\b/,f=r(d.exec),p=!d.test(l),m=function(e){if(!a(e))return!1;try{return u(l,[],e),!0}catch{return!1}},h=function(e){if(!a(e))return!1;switch(o(e)){case`AsyncFunction`:case`GeneratorFunction`:case`AsyncGeneratorFunction`:return!1}try{return p||!!f(d,c(e))}catch{return!0}};h.sham=!0,e.exports=!u||i((function(){var e;return m(m.call)||!m(Object)||!m((function(){e=!0}))||e}))?h:m},2796:function(e,t,n){var r=n(9039),i=n(4901),a=/#|\.prototype\./,o=function(e,t){var n=c[s(e)];return n===u||n!==l&&(i(t)?r(t):!!t)},s=o.normalize=function(e){return String(e).replace(a,`.`).toLowerCase()},c=o.data={},l=o.NATIVE=`N`,u=o.POLYFILL=`P`;e.exports=o},2087:function(e,t,n){var r=n(34),i=Math.floor;e.exports=Number.isInteger||function(e){return!r(e)&&isFinite(e)&&i(e)===e}},4117:function(e){e.exports=function(e){return e==null}},34:function(e,t,n){var r=n(4901);e.exports=function(e){return typeof e==`object`?e!==null:r(e)}},3925:function(e,t,n){var r=n(34);e.exports=function(e){return r(e)||e===null}},6395:function(e){e.exports=!1},5810:function(e,t,n){var r=n(34),i=n(1181).get;e.exports=function(e){if(!r(e))return!1;var t=i(e);return!!t&&t.type===`RawJSON`}},788:function(e,t,n){var r=n(34),i=n(2195),a=n(8227)(`match`);e.exports=function(e){var t;return r(e)&&((t=e[a])===void 0?i(e)===`RegExp`:!!t)}},757:function(e,t,n){var r=n(7751),i=n(4901),a=n(1625),o=n(7040),s=Object;e.exports=o?function(e){return typeof e==`symbol`}:function(e){var t=r(`Symbol`);return i(t)&&a(t.prototype,s(e))}},9539:function(e,t,n){var r=n(9565),i=n(8551),a=n(5966);e.exports=function(e,t,n){var o,s;i(e);try{if(!(o=a(e,`return`))){if(t===`throw`)throw n;return n}o=r(o,e)}catch(e){s=!0,o=e}if(t===`throw`)throw n;if(s)throw o;return i(o),n}},3994:function(e,t,n){var r=n(7657).IteratorPrototype,i=n(2360),a=n(6980),o=n(687),s=n(6269),c=function(){return this};e.exports=function(e,t,n,l){var u=t+` Iterator`;return e.prototype=i(r,{next:a(+!l,n)}),o(e,u,!1,!0),s[u]=c,e}},1088:function(e,t,n){var r=n(6518),i=n(9565),a=n(6395),o=n(350),s=n(4901),c=n(3994),l=n(2787),u=n(2967),d=n(687),f=n(6699),p=n(6840),m=n(8227),h=n(6269),g=n(7657),_=o.PROPER,v=o.CONFIGURABLE,y=g.IteratorPrototype,b=g.BUGGY_SAFARI_ITERATORS,x=m(`iterator`),S=`keys`,C=`values`,w=`entries`,T=function(){return this};e.exports=function(e,t,n,o,m,g,E){c(n,t,o);var D,O,k,A=function(e){if(e===m&&F)return F;if(!b&&e&&e in N)return N[e];switch(e){case S:case C:case w:return function(){return new n(this,e)}}return function(){return new n(this)}},j=t+` Iterator`,M=!1,N=e.prototype,P=N[x]||N[`@@iterator`]||m&&N[m],F=!b&&P||A(m),I=t===`Array`&&N.entries||P;if(I&&(D=l(I.call(new e)))!==Object.prototype&&D.next&&(a||l(D)===y||(u?u(D,y):s(D[x])||p(D,x,T)),d(D,j,!0,!0),a&&(h[j]=T)),_&&m===C&&P&&P.name!==C&&(!a&&v?f(N,`name`,C):(M=!0,F=function(){return i(P,this)})),m)if(O={values:A(C),keys:g?F:A(S),entries:A(w)},E)for(k in O)(b||M||!(k in N))&&p(N,k,O[k]);else r({target:t,proto:!0,forced:b||M},O);return a&&!E||N[x]===F||p(N,x,F,{name:m}),h[t]=F,O}},7657:function(e,t,n){var r,i,a,o=n(9039),s=n(4901),c=n(34),l=n(2360),u=n(2787),d=n(6840),f=n(8227),p=n(6395),m=f(`iterator`),h=!1;[].keys&&(`next`in(a=[].keys())?(i=u(u(a)))!==Object.prototype&&(r=i):h=!0),!c(r)||o((function(){var e={};return r[m].call(e)!==e}))?r={}:p&&(r=l(r)),s(r[m])||d(r,m,(function(){return this})),e.exports={IteratorPrototype:r,BUGGY_SAFARI_ITERATORS:h}},6269:function(e){e.exports={}},6198:function(e,t,n){var r=n(8014);e.exports=function(e){return r(e.length)}},283:function(e,t,n){var r=n(9504),i=n(9039),a=n(4901),o=n(9297),s=n(3724),c=n(350).CONFIGURABLE,l=n(3706),u=n(1181),d=u.enforce,f=u.get,p=String,m=Object.defineProperty,h=r(``.slice),g=r(``.replace),_=r([].join),v=s&&!i((function(){return m((function(){}),`length`,{value:8}).length!==8})),y=String(String).split(`String`),b=e.exports=function(e,t,n){h(p(t),0,7)===`Symbol(`&&(t=`[`+g(p(t),/^Symbol\(([^)]*)\).*$/,`$1`)+`]`),n&&n.getter&&(t=`get `+t),n&&n.setter&&(t=`set `+t),(!o(e,`name`)||c&&e.name!==t)&&(s?m(e,`name`,{value:t,configurable:!0}):e.name=t),v&&n&&o(n,`arity`)&&e.length!==n.arity&&m(e,`length`,{value:n.arity});try{n&&o(n,`constructor`)&&n.constructor?s&&m(e,`prototype`,{writable:!1}):e.prototype&&=void 0}catch{}var r=d(e);return o(r,`source`)||(r.source=_(y,typeof t==`string`?t:``)),e};Function.prototype.toString=b((function(){return a(this)&&f(this).source||l(this)}),`toString`)},741:function(e){var t=Math.ceil,n=Math.floor;e.exports=Math.trunc||function(e){var r=+e;return(r>0?n:t)(r)}},7819:function(e,t,n){e.exports=!n(9039)((function(){var e=`9007199254740993`,t=JSON.rawJSON(e);return!JSON.isRawJSON(t)||JSON.stringify(t)!==e}))},5749:function(e,t,n){var r=n(788),i=TypeError;e.exports=function(e){if(r(e))throw new i(`The method doesn't accept regular expressions`);return e}},4213:function(e,t,n){var r=n(3724),i=n(9504),a=n(9565),o=n(9039),s=n(1072),c=n(3717),l=n(8773),u=n(8981),d=n(7055),f=Object.assign,p=Object.defineProperty,m=i([].concat);e.exports=!f||o((function(){if(r&&f({b:1},f(p({},`a`,{enumerable:!0,get:function(){p(this,`b`,{value:3,enumerable:!1})}}),{b:2})).b!==1)return!0;var e={},t={},n=Symbol(`assign detection`),i=`abcdefghijklmnopqrst`;return e[n]=7,i.split(``).forEach((function(e){t[e]=e})),f({},e)[n]!==7||s(f({},t)).join(``)!==i}))?function(e,t){for(var n=u(e),i=arguments.length,o=1,f=c.f,p=l.f;i>o;)for(var h,g=d(arguments[o++]),_=f?m(s(g),f(g)):s(g),v=_.length,y=0;v>y;)h=_[y++],r&&!a(p,g,h)||(n[h]=g[h]);return n}:f},2360:function(e,t,n){var r,i=n(8551),a=n(6801),o=n(8727),s=n(421),c=n(397),l=n(4055),u=n(6119),d=`prototype`,f=`script`,p=u(`IE_PROTO`),m=function(){},h=function(e){return`<`+f+`>`+e+`</`+f+`>`},g=function(e){e.write(h(``)),e.close();var t=e.parentWindow.Object;return e=null,t},_=function(){try{r=new ActiveXObject(`htmlfile`)}catch{}var e,t,n;_=typeof document<`u`?document.domain&&r?g(r):(t=l(`iframe`),n=`java`+f+`:`,t.style.display=`none`,c.appendChild(t),t.src=String(n),(e=t.contentWindow.document).open(),e.write(h(`document.F=Object`)),e.close(),e.F):g(r);for(var i=o.length;i--;)delete _[d][o[i]];return _()};s[p]=!0,e.exports=Object.create||function(e,t){var n;return e===null?n=_():(m[d]=i(e),n=new m,m[d]=null,n[p]=e),t===void 0?n:a.f(n,t)}},6801:function(e,t,n){var r=n(3724),i=n(8686),a=n(4913),o=n(8551),s=n(5397),c=n(1072);t.f=r&&!i?Object.defineProperties:function(e,t){o(e);for(var n,r=s(t),i=c(t),l=i.length,u=0;l>u;)a.f(e,n=i[u++],r[n]);return e}},4913:function(e,t,n){var r=n(3724),i=n(5917),a=n(8686),o=n(8551),s=n(6969),c=TypeError,l=Object.defineProperty,u=Object.getOwnPropertyDescriptor,d=`enumerable`,f=`configurable`,p=`writable`;t.f=r?a?function(e,t,n){if(o(e),t=s(t),o(n),typeof e==`function`&&t===`prototype`&&`value`in n&&p in n&&!n[p]){var r=u(e,t);r&&r[p]&&(e[t]=n.value,n={configurable:f in n?n[f]:r[f],enumerable:d in n?n[d]:r[d],writable:!1})}return l(e,t,n)}:l:function(e,t,n){if(o(e),t=s(t),o(n),i)try{return l(e,t,n)}catch{}if(`get`in n||`set`in n)throw new c(`Accessors not supported`);return`value`in n&&(e[t]=n.value),e}},7347:function(e,t,n){var r=n(3724),i=n(9565),a=n(8773),o=n(6980),s=n(5397),c=n(6969),l=n(9297),u=n(5917),d=Object.getOwnPropertyDescriptor;t.f=r?d:function(e,t){if(e=s(e),t=c(t),u)try{return d(e,t)}catch{}if(l(e,t))return o(!i(a.f,e,t),e[t])}},298:function(e,t,n){var r=n(2195),i=n(5397),a=n(8480).f,o=n(7680),s=typeof window==`object`&&window&&Object.getOwnPropertyNames?Object.getOwnPropertyNames(window):[];e.exports.f=function(e){return s&&r(e)===`Window`?function(e){try{return a(e)}catch{return o(s)}}(e):a(i(e))}},8480:function(e,t,n){var r=n(1828),i=n(8727).concat(`length`,`prototype`);t.f=Object.getOwnPropertyNames||function(e){return r(e,i)}},3717:function(e,t){t.f=Object.getOwnPropertySymbols},2787:function(e,t,n){var r=n(9297),i=n(4901),a=n(8981),o=n(6119),s=n(2211),c=o(`IE_PROTO`),l=Object,u=l.prototype;e.exports=s?l.getPrototypeOf:function(e){var t=a(e);if(r(t,c))return t[c];var n=t.constructor;return i(n)&&t instanceof n?n.prototype:t instanceof l?u:null}},1625:function(e,t,n){e.exports=n(9504)({}.isPrototypeOf)},1828:function(e,t,n){var r=n(9504),i=n(9297),a=n(5397),o=n(9617).indexOf,s=n(421),c=r([].push);e.exports=function(e,t){var n,r=a(e),l=0,u=[];for(n in r)!i(s,n)&&i(r,n)&&c(u,n);for(;t.length>l;)i(r,n=t[l++])&&(~o(u,n)||c(u,n));return u}},1072:function(e,t,n){var r=n(1828),i=n(8727);e.exports=Object.keys||function(e){return r(e,i)}},8773:function(e,t){var n={}.propertyIsEnumerable,r=Object.getOwnPropertyDescriptor;t.f=r&&!n.call({1:2},1)?function(e){var t=r(this,e);return!!t&&t.enumerable}:n},2551:function(e,t,n){var r=n(6395),i=n(4576),a=n(9039),o=n(3607);e.exports=r||!a((function(){if(!(o&&o<535)){var e=Math.random();__defineSetter__.call(null,e,(function(){})),delete i[e]}}))},2967:function(e,t,n){var r=n(6706),i=n(34),a=n(7750),o=n(3506);e.exports=Object.setPrototypeOf||(`__proto__`in{}?function(){var e,t=!1,n={};try{(e=r(Object.prototype,`__proto__`,`set`))(n,[]),t=n instanceof Array}catch{}return function(n,r){return a(n),o(r),i(n)&&(t?e(n,r):n.__proto__=r),n}}():void 0)},3179:function(e,t,n){var r=n(2140),i=n(6955);e.exports=r?{}.toString:function(){return`[object `+i(this)+`]`}},4270:function(e,t,n){var r=n(9565),i=n(4901),a=n(34),o=TypeError;e.exports=function(e,t){var n,s;if(t===`string`&&i(n=e.toString)&&!a(s=r(n,e))||i(n=e.valueOf)&&!a(s=r(n,e))||t!==`string`&&i(n=e.toString)&&!a(s=r(n,e)))return s;throw new o(`Can't convert object to primitive value`)}},5031:function(e,t,n){var r=n(7751),i=n(9504),a=n(8480),o=n(3717),s=n(8551),c=i([].concat);e.exports=r(`Reflect`,`ownKeys`)||function(e){var t=a.f(s(e)),n=o.f;return n?c(t,n(e)):t}},8235:function(e,t,n){var r=n(9504),i=n(9297),a=SyntaxError,o=parseInt,s=String.fromCharCode,c=r(``.charAt),l=r(``.slice),u=r(/./.exec),d={'\\"':`"`,"\\\\":`\\`,"\\/":`/`,"\\b":`\b`,"\\f":`\f`,"\\n":`
 `,"\\r":`\r`,"\\t":`	`},f=/^[\da-f]{4}$/i,p=/^[\u0000-\u001F]$/;e.exports=function(e,t){for(var n=!0,r=``;t<e.length;){var m=c(e,t);if(m===`\\`){var h=l(e,t,t+2);if(i(d,h))r+=d[h],t+=2;else{if(h!==`\\u`)throw new a(`Unknown escape sequence: "`+h+`"`);var g=l(e,t+=2,t+4);if(!u(f,g))throw new a(`Bad Unicode escape at: `+t);r+=s(o(g,16)),t+=4}}else{if(m===`"`){n=!1,t++;break}if(u(p,m))throw new a(`Bad control character in string literal at: `+t);r+=m,t++}}if(n)throw new a(`Unterminated string at: `+t);return{value:r,end:t}}},9167:function(e,t,n){e.exports=n(4576)},1056:function(e,t,n){var r=n(4913).f;e.exports=function(e,t,n){n in e||r(e,n,{configurable:!0,get:function(){return t[n]},set:function(e){t[n]=e}})}},6682:function(e,t,n){var r=n(9565),i=n(8551),a=n(4901),o=n(2195),s=n(7323),c=TypeError;e.exports=function(e,t){var n=e.exec;if(a(n)){var l=r(n,e,t);return l!==null&&i(l),l}if(o(e)===`RegExp`)return r(s,e,t);throw new c(`RegExp#exec called on incompatible receiver`)}},7323:function(e,t,n){var r,i,a=n(9565),o=n(9504),s=n(655),c=n(7979),l=n(8429),u=n(5745),d=n(2360),f=n(1181).get,p=n(3635),m=n(8814),h=u(`native-string-replace`,String.prototype.replace),g=RegExp.prototype.exec,_=g,v=o(``.charAt),y=o(``.indexOf),b=o(``.replace),x=o(``.slice),S=(i=/b*/g,a(g,r=/a/,`a`),a(g,i,`a`),r.lastIndex!==0||i.lastIndex!==0),C=l.BROKEN_CARET,w=/()??/.exec(``)[1]!==void 0;(S||w||C||p||m)&&(_=function(e){var t,n,r,i,o,l,u,p=this,m=f(p),T=s(e),E=m.raw;if(E)return E.lastIndex=p.lastIndex,t=a(_,E,T),p.lastIndex=E.lastIndex,t;var D=m.groups,O=C&&p.sticky,k=a(c,p),A=p.source,j=0,M=T;if(O&&(k=b(k,`y`,``),y(k,`g`)===-1&&(k+=`g`),M=x(T,p.lastIndex),p.lastIndex>0&&(!p.multiline||p.multiline&&v(T,p.lastIndex-1)!==`
 `)&&(A=`(?: `+A+`)`,M=` `+M,j++),n=RegExp(`^(?:`+A+`)`,k)),w&&(n=RegExp(`^`+A+`$(?!\\s)`,k)),S&&(r=p.lastIndex),i=a(g,O?n:p,M),O?i?(i.input=x(i.input,j),i[0]=x(i[0],j),i.index=p.lastIndex,p.lastIndex+=i[0].length):p.lastIndex=0:S&&i&&(p.lastIndex=p.global?i.index+i[0].length:r),w&&i&&i.length>1&&a(h,i[0],n,(function(){for(o=1;o<arguments.length-2;o++)arguments[o]===void 0&&(i[o]=void 0)})),i&&D)for(i.groups=l=d(null),o=0;o<D.length;o++)l[(u=D[o])[0]]=i[u[1]];return i}),e.exports=_},5213:function(e,t,n){var r=n(4576),i=n(9039),a=r.RegExp;e.exports={correct:!i((function(){var e=!0;try{a(`.`,`d`)}catch{e=!1}var t={},n=``,r=e?`dgimsy`:`gimsy`,i=function(e,r){Object.defineProperty(t,e,{get:function(){return n+=r,!0}})},o={dotAll:`s`,global:`g`,ignoreCase:`i`,multiline:`m`,sticky:`y`};for(var s in e&&(o.hasIndices=`d`),o)i(s,o[s]);return Object.getOwnPropertyDescriptor(a.prototype,`flags`).get.call(t)!==r||n!==r}))}},7979:function(e,t,n){var r=n(8551);e.exports=function(){var e=r(this),t=``;return e.hasIndices&&(t+=`d`),e.global&&(t+=`g`),e.ignoreCase&&(t+=`i`),e.multiline&&(t+=`m`),e.dotAll&&(t+=`s`),e.unicode&&(t+=`u`),e.unicodeSets&&(t+=`v`),e.sticky&&(t+=`y`),t}},1034:function(e,t,n){var r=n(9565),i=n(9297),a=n(1625),o=n(5213),s=n(7979),c=RegExp.prototype;e.exports=o.correct?function(e){return e.flags}:function(e){return o.correct||!a(c,e)||i(e,`flags`)?e.flags:r(s,e)}},8429:function(e,t,n){var r=n(9039),i=n(4576).RegExp,a=r((function(){var e=i(`a`,`y`);return e.lastIndex=2,e.exec(`abcd`)!==null})),o=a||r((function(){return!i(`a`,`y`).sticky}));e.exports={BROKEN_CARET:a||r((function(){var e=i(`^r`,`gy`);return e.lastIndex=2,e.exec(`str`)!==null})),MISSED_STICKY:o,UNSUPPORTED_Y:a}},3635:function(e,t,n){var r=n(9039),i=n(4576).RegExp;e.exports=r((function(){var e=i(`.`,`s`);return!(e.dotAll&&e.test(`
 `)&&e.flags===`s`)}))},8814:function(e,t,n){var r=n(9039),i=n(4576).RegExp;e.exports=r((function(){var e=i(`(?<a>b)`,`g`);return e.exec(`b`).groups.a!==`b`||`b`.replace(e,`$<a>c`)!==`bc`}))},7750:function(e,t,n){var r=n(4117),i=TypeError;e.exports=function(e){if(r(e))throw new i(`Can't call method on `+e);return e}},7633:function(e,t,n){var r=n(7751),i=n(2106),a=n(8227),o=n(3724),s=a(`species`);e.exports=function(e){var t=r(e);o&&t&&!t[s]&&i(t,s,{configurable:!0,get:function(){return this}})}},687:function(e,t,n){var r=n(4913).f,i=n(9297),a=n(8227)(`toStringTag`);e.exports=function(e,t,n){e&&!n&&(e=e.prototype),e&&!i(e,a)&&r(e,a,{configurable:!0,value:t})}},6119:function(e,t,n){var r=n(5745),i=n(3392),a=r(`keys`);e.exports=function(e){return a[e]||(a[e]=i(e))}},7629:function(e,t,n){var r=n(6395),i=n(4576),a=n(9433),o=`__core-js_shared__`,s=e.exports=i[o]||a(o,{});(s.versions||=[]).push({version:`3.48.0`,mode:r?`pure`:`global`,copyright:`© 2013–2025 Denis Pushkarev (zloirock.ru), 2025–2026 CoreJS Company (core-js.io). All rights reserved.`,license:`https://github.com/zloirock/core-js/blob/v3.48.0/LICENSE`,source:`https://github.com/zloirock/core-js`})},5745:function(e,t,n){var r=n(7629);e.exports=function(e,t){return r[e]||(r[e]=t||{})}},2293:function(e,t,n){var r=n(8551),i=n(5548),a=n(4117),o=n(8227)(`species`);e.exports=function(e,t){var n,s=r(e).constructor;return s===void 0||a(n=r(s)[o])?t:i(n)}},8183:function(e,t,n){var r=n(9504),i=n(1291),a=n(655),o=n(7750),s=r(``.charAt),c=r(``.charCodeAt),l=r(``.slice),u=function(e){return function(t,n){var r,u,d=a(o(t)),f=i(n),p=d.length;return f<0||f>=p?e?``:void 0:(r=c(d,f))<55296||r>56319||f+1===p||(u=c(d,f+1))<56320||u>57343?e?s(d,f):r:e?l(d,f,f+2):u-56320+(r-55296<<10)+65536}};e.exports={codeAt:u(!1),charAt:u(!0)}},706:function(e,t,n){var r=n(350).PROPER,i=n(9039),a=n(7452);e.exports=function(e){return i((function(){return!!a[e]()||`​…᠎`[e]()!==`​…᠎`||r&&a[e].name!==e}))}},3802:function(e,t,n){var r=n(9504),i=n(7750),a=n(655),o=n(7452),s=r(``.replace),c=RegExp(`^[`+o+`]+`),l=RegExp(`(^|[^`+o+`])[`+o+`]+$`),u=function(e){return function(t){var n=a(i(t));return 1&e&&(n=s(n,c,``)),2&e&&(n=s(n,l,`$1`)),n}};e.exports={start:u(1),end:u(2),trim:u(3)}},4495:function(e,t,n){var r=n(9519),i=n(9039),a=n(4576).String;e.exports=!!Object.getOwnPropertySymbols&&!i((function(){var e=Symbol(`symbol detection`);return!a(e)||!(Object(e)instanceof Symbol)||!Symbol.sham&&r&&r<41}))},8242:function(e,t,n){var r=n(9565),i=n(7751),a=n(8227),o=n(6840);e.exports=function(){var e=i(`Symbol`),t=e&&e.prototype,n=t&&t.valueOf,s=a(`toPrimitive`);t&&!t[s]&&o(t,s,(function(e){return r(n,this)}),{arity:1})}},1296:function(e,t,n){e.exports=n(4495)&&!!Symbol.for&&!!Symbol.keyFor},1240:function(e,t,n){e.exports=n(9504)(1.1.valueOf)},5610:function(e,t,n){var r=n(1291),i=Math.max,a=Math.min;e.exports=function(e,t){var n=r(e);return n<0?i(n+t,0):a(n,t)}},5397:function(e,t,n){var r=n(7055),i=n(7750);e.exports=function(e){return r(i(e))}},1291:function(e,t,n){var r=n(741);e.exports=function(e){var t=+e;return t!=t||t===0?0:r(t)}},8014:function(e,t,n){var r=n(1291),i=Math.min;e.exports=function(e){var t=r(e);return t>0?i(t,9007199254740991):0}},8981:function(e,t,n){var r=n(7750),i=Object;e.exports=function(e){return i(r(e))}},2777:function(e,t,n){var r=n(9565),i=n(34),a=n(757),o=n(5966),s=n(4270),c=n(8227),l=TypeError,u=c(`toPrimitive`);e.exports=function(e,t){if(!i(e)||a(e))return e;var n,c=o(e,u);if(c){if(t===void 0&&(t=`default`),n=r(c,e,t),!i(n)||a(n))return n;throw new l(`Can't convert object to primitive value`)}return t===void 0&&(t=`number`),s(e,t)}},6969:function(e,t,n){var r=n(2777),i=n(757);e.exports=function(e){var t=r(e,`string`);return i(t)?t:t+``}},2140:function(e,t,n){var r={};r[n(8227)(`toStringTag`)]=`z`,e.exports=String(r)===`[object z]`},655:function(e,t,n){var r=n(6955),i=String;e.exports=function(e){if(r(e)===`Symbol`)throw TypeError(`Cannot convert a Symbol value to a string`);return i(e)}},6823:function(e){var t=String;e.exports=function(e){try{return t(e)}catch{return`Object`}}},3392:function(e,t,n){var r=n(9504),i=0,a=Math.random(),o=r(1.1.toString);e.exports=function(e){return`Symbol(`+(e===void 0?``:e)+`)_`+o(++i+a,36)}},7040:function(e,t,n){e.exports=n(4495)&&!Symbol.sham&&typeof Symbol.iterator==`symbol`},8686:function(e,t,n){var r=n(3724),i=n(9039);e.exports=r&&i((function(){return Object.defineProperty((function(){}),"prototype",{value:42,writable:!1}).prototype!==42}))},8622:function(e,t,n){var r=n(4576),i=n(4901),a=r.WeakMap;e.exports=i(a)&&/native code/.test(String(a))},511:function(e,t,n){var r=n(9167),i=n(9297),a=n(1951),o=n(4913).f;e.exports=function(e){var t=r.Symbol||={};i(t,e)||o(t,e,{value:a.f(e)})}},1951:function(e,t,n){t.f=n(8227)},8227:function(e,t,n){var r=n(4576),i=n(5745),a=n(9297),o=n(3392),s=n(4495),c=n(7040),l=r.Symbol,u=i(`wks`),d=c?l.for||l:l&&l.withoutSetter||o;e.exports=function(e){return a(u,e)||(u[e]=s&&a(l,e)?l[e]:d(`Symbol.`+e)),u[e]}},7452:function(e){e.exports=`	
@@ -4408,5 +4408,5 @@ img.ProseMirror-separator {
 In order to be iterable, non-array objects must have a [Symbol.iterator]() method.`)}()}function a(e,t){if(e){if(typeof e==`string`)return o(e,t);var n={}.toString.call(e).slice(8,-1);return n===`Object`&&e.constructor&&(n=e.constructor.name),n===`Map`||n===`Set`?Array.from(e):n===`Arguments`||/^(?:Ui|I)nt(?:8|16|32)(?:Clamped)?Array$/.test(n)?o(e,t):void 0}}function o(e,t){(t==null||t>e.length)&&(t=e.length);for(var n=0,r=Array(t);n<t;n++)r[n]=e[n];return r}function s(e){return s=typeof Symbol==`function`&&typeof Symbol.iterator==`symbol`?function(e){return typeof e}:function(e){return e&&typeof Symbol==`function`&&e.constructor===Symbol&&e!==Symbol.prototype?`symbol`:typeof e},s(e)}function c(e,t){for(var n=0;n<t.length;n++){var r=t[n];r.enumerable=r.enumerable||!1,r.configurable=!0,`value`in r&&(r.writable=!0),Object.defineProperty(e,u(r.key),r)}}function l(e,t,n){return(t=u(t))in e?Object.defineProperty(e,t,{value:n,enumerable:!0,configurable:!0,writable:!0}):e[t]=n,e}function u(e){var t=function(e,t){if(s(e)!=`object`||!e)return e;var n=e[Symbol.toPrimitive];if(n!==void 0){var r=n.call(e,t||`default`);if(s(r)!=`object`)return r;throw TypeError(`@@toPrimitive must return a primitive value.`)}return(t===`string`?String:Number)(e)}(e,`string`);return s(t)==`symbol`?t:t+``}n.r(r),n.d(r,{SimpleKeyboard:function(){return A},default:function(){return j}}),n(5276),n(8598),n(4782),n(4554),n(2010),n(7427),n(6099),n(7495),n(8781),n(5440),n(744),n(2762),typeof Element>`u`||`remove`in Element.prototype||(Element.prototype.remove=function(){this.parentNode&&this.parentNode.removeChild(this)}),typeof self<`u`&&`document`in self&&((!(`classList`in document.createElement(`_`))||document.createElementNS&&!(`classList`in document.createElementNS(`http://www.w3.org/2000/svg`,`g`)))&&function(e){if(`Element`in e){var t=`classList`,n=`prototype`,r=e.Element[n],i=Object,a=String[n].trim||function(){return this.replace(/^\s+|\s+$/g,``)},o=Array[n].indexOf||function(e){for(var t=0,n=this.length;t<n;t++)if(t in this&&this[t]===e)return t;return-1},s=function(e,t){this.name=e,this.code=DOMException[e],this.message=t},c=function(e,t){if(t===``)throw new s(`SYNTAX_ERR`,`The token must not be empty.`);if(/\s/.test(t))throw new s(`INVALID_CHARACTER_ERR`,`The token must not contain space characters.`);return o.call(e,t)},l=function(e){for(var t=a.call(e.getAttribute(`class`)||``),n=t?t.split(/\s+/):[],r=0,i=n.length;r<i;r++)this.push(n[r]);this._updateClassName=function(){e.setAttribute(`class`,this.toString())}},u=l[n]=[],d=function(){return new l(this)};if(s[n]=Error[n],u.item=function(e){return this[e]||null},u.contains=function(e){return~c(this,e+``)},u.add=function(){var e,t=arguments,n=0,r=t.length,i=!1;do~c(this,e=t[n]+``)||(this.push(e),i=!0);while(++n<r);i&&this._updateClassName()},u.remove=function(){var e,t,n=arguments,r=0,i=n.length,a=!1;do for(t=c(this,e=n[r]+``);~t;)this.splice(t,1),a=!0,t=c(this,e);while(++r<i);a&&this._updateClassName()},u.toggle=function(e,t){var n=this.contains(e),r=n?!0!==t&&`remove`:!1!==t&&`add`;return r&&this[r](e),!0===t||!1===t?t:!n},u.replace=function(e,t){var n=c(e+``);~n&&(this.splice(n,1,t),this._updateClassName())},u.toString=function(){return this.join(` `)},i.defineProperty){var f={get:d,enumerable:!0,configurable:!0};try{i.defineProperty(r,t,f)}catch(e){e.number!==void 0&&e.number!==-2146823252||(f.enumerable=!1,i.defineProperty(r,t,f))}}else i[n].__defineGetter__&&r.__defineGetter__(t,d)}}(self),function(){var e=document.createElement(`_`);if(e.classList.add(`c1`,`c2`),!e.classList.contains(`c2`)){var t=function(e){var t=DOMTokenList.prototype[e];DOMTokenList.prototype[e]=function(e){var n,r=arguments.length;for(n=0;n<r;n++)e=arguments[n],t.call(this,e)}};t(`add`),t(`remove`)}if(e.classList.toggle(`c3`,!1),e.classList.contains(`c3`)){var n=DOMTokenList.prototype.toggle;DOMTokenList.prototype.toggle=function(e,t){return 1 in arguments&&!this.contains(e)==!t?t:n.call(this,e)}}`replace`in document.createElement(`_`).classList||(DOMTokenList.prototype.replace=function(e,t){var n=this.toString().split(` `),r=n.indexOf(e+``);~r&&(n=n.slice(r),this.remove.apply(this,n),this.add(t),this.add.apply(this,n.slice(1)))}),e=null}()),n(2675),n(9463),n(2259),n(5700),n(8706),n(2008),n(3418),n(4423),n(3792),n(2062),n(6910),n(739),n(9572),n(2892),n(9085),n(3851),n(1278),n(9432),n(4864),n(1699),n(7764),n(8344),n(3500),n(2953),n(2712),n(2637),n(1480),n(825),n(1761);var d=function(){return e=function e(t){var n=t.getOptions,r=t.getCaretPosition,i=t.getCaretPositionEnd,a=t.dispatch;(function(e,t){if(!(e instanceof t))throw TypeError(`Cannot call a class as a function`)})(this,e),l(this,`getOptions`,void 0),l(this,`getCaretPosition`,void 0),l(this,`getCaretPositionEnd`,void 0),l(this,`dispatch`,void 0),l(this,`maxLengthReached`,void 0),l(this,`isStandardButton`,(function(e){return e&&!(e[0]===`{`&&e[e.length-1]===`}`)})),this.getOptions=n,this.getCaretPosition=r,this.getCaretPositionEnd=i,this.dispatch=a,e.bindMethods(e,this)},t=[{key:`getButtonType`,value:function(e){return e.includes(`{`)&&e.includes(`}`)&&e!==`{//}`?`functionBtn`:`standardBtn`}},{key:`getButtonClass`,value:function(e){var t=this.getButtonType(e),n=e.replace(`{`,``).replace(`}`,``),r=``;return t!==`standardBtn`&&(r=` hg-button-${n}`),`hg-${t}${r}`}},{key:`getDefaultDiplay`,value:function(){return{"{bksp}":`backspace`,"{backspace}":`backspace`,"{enter}":`< enter`,"{shift}":`shift`,"{shiftleft}":`shift`,"{shiftright}":`shift`,"{alt}":`alt`,"{s}":`shift`,"{tab}":`tab`,"{lock}":`caps`,"{capslock}":`caps`,"{accept}":`Submit`,"{space}":` `,"{//}":` `,"{esc}":`esc`,"{escape}":`esc`,"{f1}":`f1`,"{f2}":`f2`,"{f3}":`f3`,"{f4}":`f4`,"{f5}":`f5`,"{f6}":`f6`,"{f7}":`f7`,"{f8}":`f8`,"{f9}":`f9`,"{f10}":`f10`,"{f11}":`f11`,"{f12}":`f12`,"{numpaddivide}":`/`,"{numlock}":`lock`,"{arrowup}":`↑`,"{arrowleft}":`←`,"{arrowdown}":`↓`,"{arrowright}":`→`,"{prtscr}":`print`,"{scrolllock}":`scroll`,"{pause}":`pause`,"{insert}":`ins`,"{home}":`home`,"{pageup}":`up`,"{delete}":`del`,"{forwarddelete}":`del`,"{end}":`end`,"{pagedown}":`down`,"{numpadmultiply}":`*`,"{numpadsubtract}":`-`,"{numpadadd}":`+`,"{numpadenter}":`enter`,"{period}":`.`,"{numpaddecimal}":`.`,"{numpad0}":`0`,"{numpad1}":`1`,"{numpad2}":`2`,"{numpad3}":`3`,"{numpad4}":`4`,"{numpad5}":`5`,"{numpad6}":`6`,"{numpad7}":`7`,"{numpad8}":`8`,"{numpad9}":`9`}}},{key:`getButtonDisplayName`,value:function(e,t){return(t=arguments.length>2&&arguments[2]!==void 0&&arguments[2]?Object.assign({},this.getDefaultDiplay(),t):t||this.getDefaultDiplay())[e]||e}},{key:`getUpdatedInput`,value:function(e,t,n){var r=arguments.length>3&&arguments[3]!==void 0?arguments[3]:n,i=arguments.length>4&&arguments[4]!==void 0&&arguments[4],a=this.getOptions(),o=[n,r,i],s=t;return(e===`{bksp}`||e===`{backspace}`)&&s.length>0?s=this.removeAt.apply(this,[s].concat(o)):(e===`{delete}`||e===`{forwarddelete}`)&&s.length>0?s=this.removeForwardsAt.apply(this,[s].concat(o)):e===`{space}`?s=this.addStringAt.apply(this,[s,` `].concat(o)):e!==`{tab}`||typeof a.tabCharOnTab==`boolean`&&!1===a.tabCharOnTab?e!==`{enter}`&&e!==`{numpadenter}`||!a.newLineOnEnter?e.includes(`numpad`)&&Number.isInteger(Number(e[e.length-2]))?s=this.addStringAt.apply(this,[s,e[e.length-2]].concat(o)):e===`{numpaddivide}`?s=this.addStringAt.apply(this,[s,`/`].concat(o)):e===`{numpadmultiply}`?s=this.addStringAt.apply(this,[s,`*`].concat(o)):e===`{numpadsubtract}`?s=this.addStringAt.apply(this,[s,`-`].concat(o)):e===`{numpadadd}`?s=this.addStringAt.apply(this,[s,`+`].concat(o)):e===`{numpaddecimal}`?s=this.addStringAt.apply(this,[s,`.`].concat(o)):e===`{`||e===`}`?s=this.addStringAt.apply(this,[s,e].concat(o)):e.includes(`{`)||e.includes(`}`)||(s=this.addStringAt.apply(this,[s,e].concat(o))):s=this.addStringAt.apply(this,[s,`
 `].concat(o)):s=this.addStringAt.apply(this,[s,`	`].concat(o)),a.debug&&console.log(`Input will be: `+s),s}},{key:`updateCaretPos`,value:function(e){var t=arguments.length>1&&arguments[1]!==void 0&&arguments[1],n=this.updateCaretPosAction(e,t);this.dispatch((function(e){e.setCaretPosition(n)}))}},{key:`updateCaretPosAction`,value:function(e){var t=arguments.length>1&&arguments[1]!==void 0&&arguments[1],n=this.getOptions(),r=this.getCaretPosition();return r!=null&&(t?r>0&&(r-=e):r+=e),n.debug&&console.log(`Caret at:`,r),r}},{key:`addStringAt`,value:function(e,t){var n,r=arguments.length>2&&arguments[2]!==void 0?arguments[2]:e.length,i=arguments.length>3&&arguments[3]!==void 0?arguments[3]:e.length,a=arguments.length>4&&arguments[4]!==void 0&&arguments[4];return r||r===0?(n=[e.slice(0,r),t,e.slice(i)].join(``),this.isMaxLengthReached()||a&&this.updateCaretPos(t.length)):n=e+t,n}},{key:`removeAt`,value:function(e){var t,n=arguments.length>1&&arguments[1]!==void 0?arguments[1]:e.length,r=arguments.length>2&&arguments[2]!==void 0?arguments[2]:e.length,i=arguments.length>3&&arguments[3]!==void 0&&arguments[3];if(n===0&&r===0)return e;if(n===r){var a=/([\uD800-\uDBFF][\uDC00-\uDFFF])/g;n&&n>=0?e.substring(n-2,n).match(a)?(t=e.substr(0,n-2)+e.substr(n),i&&this.updateCaretPos(2,!0)):(t=e.substr(0,n-1)+e.substr(n),i&&this.updateCaretPos(1,!0)):e.slice(-2).match(a)?(t=e.slice(0,-2),i&&this.updateCaretPos(2,!0)):(t=e.slice(0,-1),i&&this.updateCaretPos(1,!0))}else t=e.slice(0,n)+e.slice(r),i&&this.dispatch((function(e){e.setCaretPosition(n)}));return t}},{key:`removeForwardsAt`,value:function(e){var t,n=arguments.length>1&&arguments[1]!==void 0?arguments[1]:e.length,r=arguments.length>2&&arguments[2]!==void 0?arguments[2]:e.length,i=arguments.length>3&&arguments[3]!==void 0&&arguments[3];return e!=null&&e.length&&n!==null?(n===r?t=e.substring(n,n+2).match(/([\uD800-\uDBFF][\uDC00-\uDFFF])/g)?e.substr(0,n)+e.substr(n+2):e.substr(0,n)+e.substr(n+1):(t=e.slice(0,n)+e.slice(r),i&&this.dispatch((function(e){e.setCaretPosition(n)}))),t):e}},{key:`handleMaxLength`,value:function(e,t){var n=this.getOptions(),r=n.maxLength,i=e[n.inputName||`default`],a=t.length-1>=r;if(t.length<=i.length)return!1;if(Number.isInteger(r))return n.debug&&console.log(`maxLength (num) reached:`,a),a?(this.maxLengthReached=!0,!0):(this.maxLengthReached=!1,!1);if(s(r)===`object`){var o=t.length-1>=r[n.inputName||`default`];return n.debug&&console.log(`maxLength (obj) reached:`,o),o?(this.maxLengthReached=!0,!0):(this.maxLengthReached=!1,!1)}}},{key:`isMaxLengthReached`,value:function(){return!!this.maxLengthReached}},{key:`isTouchDevice`,value:function(){return`ontouchstart`in window||navigator.maxTouchPoints}},{key:`pointerEventsSupported`,value:function(){return!!window.PointerEvent}},{key:`camelCase`,value:function(e){return e?e.toLowerCase().trim().split(/[.\-_\s]/g).reduce((function(e,t){return t.length?e+t[0].toUpperCase()+t.slice(1):e})):``}},{key:`chunkArray`,value:function(e,t){return i(Array(Math.ceil(e.length/t))).map((function(n,r){return e.slice(t*r,t+t*r)}))}},{key:`escapeRegex`,value:function(e){return e.replace(/[-\/\\^$*+?.()|[\]{}]/g,`\\$&`)}},{key:`getRtlOffset`,value:function(e,t){var n=e,r=t.indexOf(`‫`);return r<e&&r!=-1&&n--,t.indexOf(`‬`)<e&&r!=-1&&n--,n<0?0:n}},{key:`isConstructor`,value:function(e){try{Reflect.construct(String,[],e)}catch{return!1}return!0}}],n=[{key:`bindMethods`,value:function(e,t){var n,r=function(e,t){var n=typeof Symbol<`u`&&e[Symbol.iterator]||e[`@@iterator`];if(!n){if(Array.isArray(e)||(n=a(e))||t&&e&&typeof e.length==`number`){n&&(e=n);var r=0,i=function(){};return{s:i,n:function(){return r>=e.length?{done:!0}:{done:!1,value:e[r++]}},e:function(e){throw e},f:i}}throw TypeError(`Invalid attempt to iterate non-iterable instance.
 In order to be iterable, non-array objects must have a [Symbol.iterator]() method.`)}var o,s=!0,c=!1;return{s:function(){n=n.call(e)},n:function(){var e=n.next();return s=e.done,e},e:function(e){c=!0,o=e},f:function(){try{s||n.return==null||n.return()}finally{if(c)throw o}}}}(Object.getOwnPropertyNames(e.prototype));try{for(r.s();!(n=r.n()).done;){var i=n.value;i===`constructor`||i===`bindMethods`||(t[i]=t[i].bind(t))}}catch(e){r.e(e)}finally{r.f()}}}],t&&c(e.prototype,t),n&&c(e,n),Object.defineProperty(e,"prototype",{writable:!1}),e;var e,t,n}();l(d,`noop`,(function(){}));var f=d;function p(e){return p=typeof Symbol==`function`&&typeof Symbol.iterator==`symbol`?function(e){return typeof e}:function(e){return e&&typeof Symbol==`function`&&e.constructor===Symbol&&e!==Symbol.prototype?`symbol`:typeof e},p(e)}function m(e,t){for(var n=0;n<t.length;n++){var r=t[n];r.enumerable=r.enumerable||!1,r.configurable=!0,`value`in r&&(r.writable=!0),Object.defineProperty(e,g(r.key),r)}}function h(e,t,n){return(t=g(t))in e?Object.defineProperty(e,t,{value:n,enumerable:!0,configurable:!0,writable:!0}):e[t]=n,e}function g(e){var t=function(e,t){if(p(e)!=`object`||!e)return e;var n=e[Symbol.toPrimitive];if(n!==void 0){var r=n.call(e,t||`default`);if(p(r)!=`object`)return r;throw TypeError(`@@toPrimitive must return a primitive value.`)}return(t===`string`?String:Number)(e)}(e,`string`);return p(t)==`symbol`?t:t+``}var _=function(){return e=function e(t){var n=this,r=t.dispatch,i=t.getOptions;(function(e,t){if(!(e instanceof t))throw TypeError(`Cannot call a class as a function`)})(this,e),h(this,`getOptions`,void 0),h(this,`dispatch`,void 0),h(this,`isModifierKey`,(function(e){return e.altKey||e.ctrlKey||e.shiftKey||[`Tab`,`CapsLock`,`Esc`,`ArrowUp`,`ArrowDown`,`ArrowLeft`,`ArrowRight`].includes(e.code||e.key||n.keyCodeToKey(e?.keyCode))})),this.dispatch=r,this.getOptions=i,f.bindMethods(e,this)},t=[{key:`handleHighlightKeyDown`,value:function(e){var t=this.getOptions();t.physicalKeyboardHighlightPreventDefault&&this.isModifierKey(e)&&(e.preventDefault(),e.stopImmediatePropagation());var n=this.getSimpleKeyboardLayoutKey(e);this.dispatch((function(r){var i,a,o=r.getButtonElement(n),s=r.getButtonElement(`{${n}}`);if(o)i=o,a=n;else{if(!s)return;i=s,a=`{${n}}`}var c,l,u,d,f=function(e){e.style.background=t.physicalKeyboardHighlightBgColor||`#dadce4`,e.style.color=t.physicalKeyboardHighlightTextColor||`black`};if(i)if(Array.isArray(i)){if(i.forEach((function(e){return f(e)})),t.physicalKeyboardHighlightPress)if(t.physicalKeyboardHighlightPressUsePointerEvents)(c=i[0])==null||(l=c.onpointerdown)==null||l.call(c,e);else if(t.physicalKeyboardHighlightPressUseClick){var p;(p=i[0])==null||p.click()}else r.handleButtonClicked(a,e)}else f(i),t.physicalKeyboardHighlightPress&&(t.physicalKeyboardHighlightPressUsePointerEvents?(u=i)==null||(d=u.onpointerdown)==null||d.call(u,e):t.physicalKeyboardHighlightPressUseClick?i.click():r.handleButtonClicked(a,e))}))}},{key:`handleHighlightKeyUp`,value:function(e){var t=this.getOptions();t.physicalKeyboardHighlightPreventDefault&&this.isModifierKey(e)&&(e.preventDefault(),e.stopImmediatePropagation());var n=this.getSimpleKeyboardLayoutKey(e);this.dispatch((function(r){var i,a,o,s=r.getButtonElement(n)||r.getButtonElement(`{${n}}`),c=function(e){e.removeAttribute&&e.removeAttribute(`style`)};s&&(Array.isArray(s)?(s.forEach((function(e){return c(e)})),t.physicalKeyboardHighlightPressUsePointerEvents&&((i=s[0])==null||(a=i.onpointerup)==null||a.call(i,e))):(c(s),t.physicalKeyboardHighlightPressUsePointerEvents&&(s==null||(o=s.onpointerup)==null||o.call(s,e))))}))}},{key:`getSimpleKeyboardLayoutKey`,value:function(e){var t=``,n=e.code||e.key||this.keyCodeToKey(e?.keyCode);return(t=n!=null&&n.includes(`Numpad`)||n!=null&&n.includes(`Shift`)||n!=null&&n.includes(`Space`)||n!=null&&n.includes(`Backspace`)||n!=null&&n.includes(`Control`)||n!=null&&n.includes(`Alt`)||n!=null&&n.includes(`Meta`)?e.code||``:e.key||this.keyCodeToKey(e?.keyCode)||``).length>1?t?.toLowerCase():t}},{key:`keyCodeToKey`,value:function(e){return{8:`Backspace`,9:`Tab`,13:`Enter`,16:`Shift`,17:`Ctrl`,18:`Alt`,19:`Pause`,20:`CapsLock`,27:`Esc`,32:`Space`,33:`PageUp`,34:`PageDown`,35:`End`,36:`Home`,37:`ArrowLeft`,38:`ArrowUp`,39:`ArrowRight`,40:`ArrowDown`,45:`Insert`,46:`Delete`,48:`0`,49:`1`,50:`2`,51:`3`,52:`4`,53:`5`,54:`6`,55:`7`,56:`8`,57:`9`,65:`A`,66:`B`,67:`C`,68:`D`,69:`E`,70:`F`,71:`G`,72:`H`,73:`I`,74:`J`,75:`K`,76:`L`,77:`M`,78:`N`,79:`O`,80:`P`,81:`Q`,82:`R`,83:`S`,84:`T`,85:`U`,86:`V`,87:`W`,88:`X`,89:`Y`,90:`Z`,91:`Meta`,96:`Numpad0`,97:`Numpad1`,98:`Numpad2`,99:`Numpad3`,100:`Numpad4`,101:`Numpad5`,102:`Numpad6`,103:`Numpad7`,104:`Numpad8`,105:`Numpad9`,106:`NumpadMultiply`,107:`NumpadAdd`,109:`NumpadSubtract`,110:`NumpadDecimal`,111:`NumpadDivide`,112:`F1`,113:`F2`,114:`F3`,115:`F4`,116:`F5`,117:`F6`,118:`F7`,119:`F8`,120:`F9`,121:`F10`,122:`F11`,123:`F12`,144:`NumLock`,145:`ScrollLock`,186:`;`,187:`=`,188:`,`,189:`-`,190:`.`,191:`/`,192:"`",219:`[`,220:`\\`,221:`]`,222:`'`}[e]||``}}],t&&m(e.prototype,t),n&&m(e,n),Object.defineProperty(e,"prototype",{writable:!1}),e;var e,t,n}();function v(e){return v=typeof Symbol==`function`&&typeof Symbol.iterator==`symbol`?function(e){return typeof e}:function(e){return e&&typeof Symbol==`function`&&e.constructor===Symbol&&e!==Symbol.prototype?`symbol`:typeof e},v(e)}function y(e,t){for(var n=0;n<t.length;n++){var r=t[n];r.enumerable=r.enumerable||!1,r.configurable=!0,`value`in r&&(r.writable=!0),Object.defineProperty(e,x(r.key),r)}}function b(e,t,n){return(t=x(t))in e?Object.defineProperty(e,t,{value:n,enumerable:!0,configurable:!0,writable:!0}):e[t]=n,e}function x(e){var t=function(e,t){if(v(e)!=`object`||!e)return e;var n=e[Symbol.toPrimitive];if(n!==void 0){var r=n.call(e,t||`default`);if(v(r)!=`object`)return r;throw TypeError(`@@toPrimitive must return a primitive value.`)}return(t===`string`?String:Number)(e)}(e,`string`);return v(t)==`symbol`?t:t+``}var S=function(){return e=function e(t){var n=t.utilities,r=t.options;(function(e,t){if(!(e instanceof t))throw TypeError(`Cannot call a class as a function`)})(this,e),b(this,`utilities`,void 0),b(this,`options`,void 0),b(this,`candidateBoxElement`,void 0),b(this,`pageIndex`,0),b(this,`pageSize`,void 0),this.utilities=n,this.options=r,f.bindMethods(e,this),this.pageSize=this.utilities.getOptions().layoutCandidatesPageSize||5},t=[{key:`destroy`,value:function(){this.candidateBoxElement&&(this.candidateBoxElement.remove(),this.pageIndex=0)}},{key:`show`,value:function(e){var t=this,n=e.candidateValue,r=e.targetElement,i=e.onSelect;if(n&&n.length){var a=this.utilities.chunkArray(n.split(` `),this.pageSize);this.renderPage({candidateListPages:a,targetElement:r,pageIndex:this.pageIndex,nbPages:a.length,onItemSelected:function(e,n){i(e,n),t.destroy()}})}}},{key:`renderPage`,value:function(e){var t,n=this,r=e.candidateListPages,i=e.targetElement,a=e.pageIndex,o=e.nbPages,s=e.onItemSelected;(t=this.candidateBoxElement)==null||t.remove(),this.candidateBoxElement=document.createElement(`div`),this.candidateBoxElement.className=`hg-candidate-box`;var c=document.createElement(`ul`);c.className=`hg-candidate-box-list`,r[a].forEach((function(e){var t=document.createElement(`li`),r=function(){var e=new(n.options.useTouchEvents?TouchEvent:MouseEvent)(`click`);return Object.defineProperty(e,"target",{value:t}),e};t.className=`hg-candidate-box-list-item`,t.innerHTML=n.options.display?.[e]||e,n.options.useTouchEvents?t.ontouchstart=function(t){return s(e,t||r())}:t.onclick=function(){return s(e,arguments.length>0&&arguments[0]!==void 0?arguments[0]:r())},c.appendChild(t)}));var l=a>0,u=document.createElement(`div`);u.classList.add(`hg-candidate-box-prev`),l&&u.classList.add(`hg-candidate-box-btn-active`);var d=function(){l&&n.renderPage({candidateListPages:r,targetElement:i,pageIndex:a-1,nbPages:o,onItemSelected:s})};this.options.useTouchEvents?u.ontouchstart=d:u.onclick=d,this.candidateBoxElement.appendChild(u),this.candidateBoxElement.appendChild(c);var f=a<o-1,p=document.createElement(`div`);p.classList.add(`hg-candidate-box-next`),f&&p.classList.add(`hg-candidate-box-btn-active`);var m=function(){f&&n.renderPage({candidateListPages:r,targetElement:i,pageIndex:a+1,nbPages:o,onItemSelected:s})};this.options.useTouchEvents?p.ontouchstart=m:p.onclick=m,this.candidateBoxElement.appendChild(p),i.prepend(this.candidateBoxElement)}}],t&&y(e.prototype,t),n&&y(e,n),Object.defineProperty(e,"prototype",{writable:!1}),e;var e,t,n}();function C(e){return function(e){if(Array.isArray(e))return w(e)}(e)||function(e){if(typeof Symbol<`u`&&e[Symbol.iterator]!=null||e[`@@iterator`]!=null)return Array.from(e)}(e)||function(e,t){if(e){if(typeof e==`string`)return w(e,t);var n={}.toString.call(e).slice(8,-1);return n===`Object`&&e.constructor&&(n=e.constructor.name),n===`Map`||n===`Set`?Array.from(e):n===`Arguments`||/^(?:Ui|I)nt(?:8|16|32)(?:Clamped)?Array$/.test(n)?w(e,t):void 0}}(e)||function(){throw TypeError(`Invalid attempt to spread non-iterable instance.
-In order to be iterable, non-array objects must have a [Symbol.iterator]() method.`)}()}function w(e,t){(t==null||t>e.length)&&(t=e.length);for(var n=0,r=Array(t);n<t;n++)r[n]=e[n];return r}function T(e){return T=typeof Symbol==`function`&&typeof Symbol.iterator==`symbol`?function(e){return typeof e}:function(e){return e&&typeof Symbol==`function`&&e.constructor===Symbol&&e!==Symbol.prototype?`symbol`:typeof e},T(e)}function E(e,t){var n=Object.keys(e);if(Object.getOwnPropertySymbols){var r=Object.getOwnPropertySymbols(e);t&&(r=r.filter((function(t){return Object.getOwnPropertyDescriptor(e,t).enumerable}))),n.push.apply(n,r)}return n}function D(e,t){for(var n=0;n<t.length;n++){var r=t[n];r.enumerable=r.enumerable||!1,r.configurable=!0,`value`in r&&(r.writable=!0),Object.defineProperty(e,k(r.key),r)}}function O(e,t,n){return(t=k(t))in e?Object.defineProperty(e,t,{value:n,enumerable:!0,configurable:!0,writable:!0}):e[t]=n,e}function k(e){var t=function(e,t){if(T(e)!=`object`||!e)return e;var n=e[Symbol.toPrimitive];if(n!==void 0){var r=n.call(e,t||`default`);if(T(r)!=`object`)return r;throw TypeError(`@@toPrimitive must return a primitive value.`)}return(t===`string`?String:Number)(e)}(e,`string`);return T(t)==`symbol`?t:t+``}var A=function(){return e=function e(t,n){var r=this;if(function(e,t){if(!(e instanceof t))throw TypeError(`Cannot call a class as a function`)}(this,e),O(this,`input`,void 0),O(this,`options`,void 0),O(this,`utilities`,void 0),O(this,`caretPosition`,void 0),O(this,`caretPositionEnd`,void 0),O(this,`keyboardDOM`,void 0),O(this,`keyboardPluginClasses`,void 0),O(this,`keyboardDOMClass`,void 0),O(this,`buttonElements`,void 0),O(this,`currentInstanceName`,void 0),O(this,`allKeyboardInstances`,void 0),O(this,`keyboardInstanceNames`,void 0),O(this,`isFirstKeyboardInstance`,void 0),O(this,`physicalKeyboard`,void 0),O(this,`modules`,void 0),O(this,`activeButtonClass`,void 0),O(this,`holdInteractionTimeout`,void 0),O(this,`holdTimeout`,void 0),O(this,`isMouseHold`,void 0),O(this,`initialized`,void 0),O(this,`candidateBox`,void 0),O(this,`keyboardRowsDOM`,void 0),O(this,`defaultName`,`default`),O(this,`activeInputElement`,null),O(this,`handleParams`,(function(e,t){var n,r,i;if(typeof e==`string`)n=e.split(`.`).join(``),r=document.querySelector(`.${n}`),i=t;else if(e instanceof HTMLDivElement){if(!e.className)throw console.warn(`Any DOM element passed as parameter must have a class.`),Error(`KEYBOARD_DOM_CLASS_ERROR`);n=e.className.split(` `)[0],r=e,i=t}else n=`simple-keyboard`,r=document.querySelector(`.${n}`),i=e;return{keyboardDOMClass:n,keyboardDOM:r,options:i}})),O(this,`getOptions`,(function(){return r.options})),O(this,`getCaretPosition`,(function(){return r.caretPosition})),O(this,`getCaretPositionEnd`,(function(){return r.caretPositionEnd})),O(this,`registerModule`,(function(e,t){r.modules[e]||(r.modules[e]={}),t(r.modules[e])})),O(this,`getKeyboardClassString`,(function(){var e=[...arguments];return[r.keyboardDOMClass].concat(e).filter((function(e){return!!e})).join(` `)})),typeof window<`u`){var i=this.handleParams(t,n),a=i.keyboardDOMClass,o=i.keyboardDOM,s=i.options,c=s===void 0?{}:s;this.utilities=new f({getOptions:this.getOptions,getCaretPosition:this.getCaretPosition,getCaretPositionEnd:this.getCaretPositionEnd,dispatch:this.dispatch}),this.caretPosition=null,this.caretPositionEnd=null,this.keyboardDOM=o,this.options=function(e){for(var t=1;t<arguments.length;t++){var n=arguments[t]==null?{}:arguments[t];t%2?E(Object(n),!0).forEach((function(t){O(e,t,n[t])})):Object.getOwnPropertyDescriptors?Object.defineProperties(e,Object.getOwnPropertyDescriptors(n)):E(Object(n)).forEach((function(t){Object.defineProperty(e,t,Object.getOwnPropertyDescriptor(n,t))}))}return e}({layoutName:`default`,theme:`hg-theme-default`,inputName:`default`,preventMouseDownDefault:!1,enableLayoutCandidates:!0,excludeFromLayout:{}},c),this.keyboardPluginClasses=``,f.bindMethods(e,this);var l=this.options.inputName,u=l===void 0?this.defaultName:l;if(this.input={},this.input[u]=``,this.keyboardDOMClass=a,this.buttonElements={},window.SimpleKeyboardInstances||(window.SimpleKeyboardInstances={}),this.currentInstanceName=this.utilities.camelCase(this.keyboardDOMClass),window.SimpleKeyboardInstances[this.currentInstanceName]=this,this.allKeyboardInstances=window.SimpleKeyboardInstances,this.keyboardInstanceNames=Object.keys(window.SimpleKeyboardInstances),this.isFirstKeyboardInstance=this.keyboardInstanceNames[0]===this.currentInstanceName,this.physicalKeyboard=new _({dispatch:this.dispatch,getOptions:this.getOptions}),this.candidateBox=this.options.enableLayoutCandidates?new S({utilities:this.utilities,options:this.options}):null,!this.keyboardDOM)throw console.warn(`".${a}" was not found in the DOM.`),Error(`KEYBOARD_DOM_ERROR`);this.render(),this.modules={},this.loadModules()}},t=[{key:`setCaretPosition`,value:function(e){var t=arguments.length>1&&arguments[1]!==void 0?arguments[1]:e;this.caretPosition=e,this.caretPositionEnd=t}},{key:`getInputCandidates`,value:function(e){var t=this,n=this.options,r=n.layoutCandidates,i=n.layoutCandidatesCaseSensitiveMatch;if(!r||T(r)!==`object`)return{};var a=Object.keys(r).filter((function(n){var r=e.substring(0,t.getCaretPositionEnd()||0)||e,a=RegExp(`${t.utilities.escapeRegex(n)}\$`,i?`g`:`gi`);return!!C(r.matchAll(a)).length}));if(a.length>1){var o=a.sort((function(e,t){return t.length-e.length}))[0];return{candidateKey:o,candidateValue:r[o]}}if(a.length){var s=a[0];return{candidateKey:s,candidateValue:r[s]}}return{}}},{key:`showCandidatesBox`,value:function(e,t,n){var r=this;this.candidateBox&&this.candidateBox.show({candidateValue:t,targetElement:n,onSelect:function(t,n){var i=r.options,a=i.layoutCandidatesCaseSensitiveMatch,o=i.disableCandidateNormalization,s=i.enableLayoutCandidatesKeyPress,c=t;o||(c=t.normalize(`NFD`)),typeof r.options.beforeInputUpdate==`function`&&r.options.beforeInputUpdate(r);var l=r.getInput(r.options.inputName,!0),u=r.getCaretPositionEnd()||0,d=l.substring(0,u||0)||l,f=RegExp(`${r.utilities.escapeRegex(e)}\$`,a?`g`:`gi`),p=d.replace(f,c),m=l.replace(d,p),h=p.length-d.length,g=(u||l.length)+h;g<0&&(g=0),r.setInput(m,r.options.inputName,!0),r.setCaretPosition(g),s&&typeof r.options.onKeyPress==`function`&&r.options.onKeyPress(t,n),typeof r.options.onChange==`function`&&r.options.onChange(r.getInput(r.options.inputName,!0),n),typeof r.options.onChangeAll==`function`&&r.options.onChangeAll(r.getAllInputs(),n)}})}},{key:`handleButtonClicked`,value:function(e,t){var n=this.options,r=n.inputName,i=r===void 0?this.defaultName:r,a=n.debug;if(e!==`{//}`){this.input[i]||(this.input[i]=``),typeof this.options.beforeInputUpdate==`function`&&this.options.beforeInputUpdate(this);var o=this.utilities.getUpdatedInput(e,this.input[i],this.caretPosition,this.caretPositionEnd);if(this.utilities.isStandardButton(e)&&this.activeInputElement&&this.input[i]&&this.input[i]===o&&this.caretPosition===0&&this.caretPositionEnd===o.length)return this.setInput(``,this.options.inputName,!0),this.setCaretPosition(0),this.activeInputElement.value=``,this.activeInputElement.setSelectionRange(0,0),void this.handleButtonClicked(e,t);if(typeof this.options.onKeyPress==`function`&&this.options.onKeyPress(e,t),this.input[i]!==o&&(!this.options.inputPattern||this.options.inputPattern&&this.inputPatternIsValid(o))){if(this.options.maxLength&&this.utilities.handleMaxLength(this.input,o))return;var s=this.utilities.getUpdatedInput(e,this.input[i],this.caretPosition,this.caretPositionEnd,!0);if(this.setInput(s,this.options.inputName,!0),a&&console.log(`Input changed:`,this.getAllInputs()),this.options.debug&&console.log(`Caret at: `,this.getCaretPosition(),this.getCaretPositionEnd(),`(${this.keyboardDOMClass})`,t?.type),this.options.syncInstanceInputs&&this.syncInstanceInputs(),typeof this.options.onChange==`function`&&this.options.onChange(this.getInput(this.options.inputName,!0),t),typeof this.options.onChangeAll==`function`&&this.options.onChangeAll(this.getAllInputs(),t),t!=null&&t.target&&this.options.enableLayoutCandidates){var c,l=this.getInputCandidates(o),u=l.candidateKey,d=l.candidateValue;u&&d?this.showCandidatesBox(u,d,this.keyboardDOM):(c=this.candidateBox)==null||c.destroy()}}this.caretPositionEnd&&this.caretPosition!==this.caretPositionEnd&&(this.setCaretPosition(this.caretPositionEnd,this.caretPositionEnd),this.activeInputElement&&this.activeInputElement.setSelectionRange(this.caretPositionEnd,this.caretPositionEnd),this.options.debug&&console.log(`Caret position aligned`,this.caretPosition)),a&&console.log(`Key pressed:`,e)}}},{key:`getMouseHold`,value:function(){return this.isMouseHold}},{key:`setMouseHold`,value:function(e){this.options.syncInstanceInputs?this.dispatch((function(t){t.isMouseHold=e})):this.isMouseHold=e}},{key:`handleButtonMouseDown`,value:function(e,t){var n=this;t&&(this.options.preventMouseDownDefault&&t.preventDefault(),this.options.stopMouseDownPropagation&&t.stopPropagation(),t.target.classList.add(this.activeButtonClass)),this.holdInteractionTimeout&&clearTimeout(this.holdInteractionTimeout),this.holdTimeout&&clearTimeout(this.holdTimeout),this.setMouseHold(!0),this.options.disableButtonHold||(this.holdTimeout=window.setTimeout((function(){(n.getMouseHold()&&(!e.includes(`{`)&&!e.includes(`}`)||e===`{delete}`||e===`{backspace}`||e===`{bksp}`||e===`{space}`||e===`{tab}`)||e===`{arrowright}`||e===`{arrowleft}`||e===`{arrowup}`||e===`{arrowdown}`)&&(n.options.debug&&console.log(`Button held:`,e),n.handleButtonHold(e)),clearTimeout(n.holdTimeout)}),500))}},{key:`handleButtonMouseUp`,value:function(e,t){var n=this;t&&(this.options.preventMouseUpDefault&&t.preventDefault&&t.preventDefault(),this.options.stopMouseUpPropagation&&t.stopPropagation&&t.stopPropagation(),!(t.target===this.keyboardDOM||t.target&&this.keyboardDOM.contains(t.target)||this.candidateBox&&this.candidateBox.candidateBoxElement&&(t.target===this.candidateBox.candidateBoxElement||t.target&&this.candidateBox.candidateBoxElement.contains(t.target)))&&this.candidateBox&&this.candidateBox.destroy()),this.recurseButtons((function(e){e.classList.remove(n.activeButtonClass)})),this.setMouseHold(!1),this.holdInteractionTimeout&&clearTimeout(this.holdInteractionTimeout),e&&typeof this.options.onKeyReleased==`function`&&this.options.onKeyReleased(e,t)}},{key:`handleKeyboardContainerMouseDown`,value:function(e){this.options.preventMouseDownDefault&&e.preventDefault()}},{key:`handleButtonHold`,value:function(e){var t=this;this.holdInteractionTimeout&&clearTimeout(this.holdInteractionTimeout),this.holdInteractionTimeout=window.setTimeout((function(){t.getMouseHold()?(t.handleButtonClicked(e),t.handleButtonHold(e)):clearTimeout(t.holdInteractionTimeout)}),100)}},{key:`syncInstanceInputs`,value:function(){var e=this;this.dispatch((function(t){t.replaceInput(e.input),t.setCaretPosition(e.caretPosition,e.caretPositionEnd)}))}},{key:`clearInput`,value:function(){var e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:this.options.inputName||this.defaultName;this.input[e]=``,this.setCaretPosition(0),this.options.syncInstanceInputs&&this.syncInstanceInputs()}},{key:`getInput`,value:function(){var e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:this.options.inputName||this.defaultName,t=arguments.length>1&&arguments[1]!==void 0&&arguments[1];return this.options.syncInstanceInputs&&!t&&this.syncInstanceInputs(),this.options.rtl?`‫`+this.input[e].replace(`‫`,``).replace(`‬`,``)+`‬`:this.input[e]}},{key:`getAllInputs`,value:function(){var e=this,t={};return Object.keys(this.input).forEach((function(n){t[n]=e.getInput(n,!0)})),t}},{key:`setInput`,value:function(e){var t=arguments.length>1&&arguments[1]!==void 0?arguments[1]:this.options.inputName||this.defaultName,n=arguments.length>2?arguments[2]:void 0;this.input[t]=e,!n&&this.options.syncInstanceInputs&&this.syncInstanceInputs()}},{key:`replaceInput`,value:function(e){this.input=e}},{key:`setOptions`,value:function(){var e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:{},t=this.changedOptions(e);this.options=Object.assign(this.options,e),t.length&&(this.options.debug&&console.log(`changedOptions`,t),this.onSetOptions(t),this.render())}},{key:`changedOptions`,value:function(e){var t=this;return Object.keys(e).filter((function(n){return JSON.stringify(e[n])!==JSON.stringify(t.options[n])}))}},{key:`onSetOptions`,value:function(){var e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:[];e.includes(`layoutName`)&&this.candidateBox&&this.candidateBox.destroy(),(e.includes(`layoutCandidatesPageSize`)||e.includes(`layoutCandidates`))&&this.candidateBox&&(this.candidateBox.destroy(),this.candidateBox=new S({utilities:this.utilities,options:this.options}))}},{key:`resetRows`,value:function(){this.keyboardRowsDOM&&this.keyboardRowsDOM.remove(),this.keyboardDOM.className=this.keyboardDOMClass,this.keyboardDOM.setAttribute(`data-skInstance`,this.currentInstanceName),this.buttonElements={}}},{key:`dispatch`,value:function(e){if(!window.SimpleKeyboardInstances)throw console.warn(`SimpleKeyboardInstances is not defined. Dispatch cannot be called.`),Error(`INSTANCES_VAR_ERROR`);return Object.keys(window.SimpleKeyboardInstances).forEach((function(t){e(window.SimpleKeyboardInstances[t],t)}))}},{key:`addButtonTheme`,value:function(e,t){var n=this;t&&e&&(e.split(` `).forEach((function(r){t.split(` `).forEach((function(t){n.options.buttonTheme||(n.options.buttonTheme=[]);var i=!1;n.options.buttonTheme.map((function(e){if(e!=null&&e.class.split(` `).includes(t)){i=!0;var n=e.buttons.split(` `);n.includes(r)||(i=!0,n.push(r),e.buttons=n.join(` `))}return e})),i||n.options.buttonTheme.push({class:t,buttons:e})}))})),this.render())}},{key:`removeButtonTheme`,value:function(e,t){var n=this;if(!e&&!t)return this.options.buttonTheme=[],void this.render();e&&Array.isArray(this.options.buttonTheme)&&this.options.buttonTheme.length&&(e.split(` `).forEach((function(e){var r;(r=n.options)==null||(r=r.buttonTheme)==null||r.map((function(r,i){if(r&&t&&t.includes(r.class)||!t){var a,o=r?.buttons.split(` `).filter((function(t){return t!==e}));r&&o!=null&&o.length?r.buttons=o.join(` `):((a=n.options.buttonTheme)==null||a.splice(i,1),r=null)}return r}))})),this.render())}},{key:`getButtonElement`,value:function(e){var t,n=this.buttonElements[e];return n&&(t=n.length>1?n:n[0]),t}},{key:`inputPatternIsValid`,value:function(e){var t,n=this.options.inputPattern;if((t=n instanceof RegExp?n:n[this.options.inputName||this.defaultName])&&e){var r=t.test(e);return this.options.debug&&console.log(`inputPattern ("${t}"): ${r?`passed`:`did not pass!`}`),r}return!0}},{key:`setEventListeners`,value:function(){if(this.isFirstKeyboardInstance||!this.allKeyboardInstances){this.options.debug&&console.log(`Caret handling started (${this.keyboardDOMClass})`);var e=this.options.physicalKeyboardHighlightPreventDefault,t=e!==void 0&&e;document.addEventListener(`keyup`,this.handleKeyUp,t),document.addEventListener(`keydown`,this.handleKeyDown,t),document.addEventListener(`mouseup`,this.handleMouseUp),document.addEventListener(`touchend`,this.handleTouchEnd),this.options.updateCaretOnSelectionChange&&document.addEventListener(`selectionchange`,this.handleSelectionChange),document.addEventListener(`select`,this.handleSelect)}}},{key:`handleKeyUp`,value:function(e){this.caretEventHandler(e),this.options.physicalKeyboardHighlight&&this.physicalKeyboard.handleHighlightKeyUp(e)}},{key:`handleKeyDown`,value:function(e){this.options.physicalKeyboardHighlight&&this.physicalKeyboard.handleHighlightKeyDown(e)}},{key:`handleMouseUp`,value:function(e){this.caretEventHandler(e)}},{key:`handleTouchEnd`,value:function(e){this.caretEventHandler(e)}},{key:`handleSelect`,value:function(e){this.caretEventHandler(e)}},{key:`handleSelectionChange`,value:function(e){navigator.userAgent.includes(`Firefox`)||this.caretEventHandler(e)}},{key:`caretEventHandler`,value:function(e){var t,n=this;e.target.tagName&&(t=e.target.tagName.toLowerCase()),this.dispatch((function(r){var i=e.target===r.keyboardDOM||e.target&&r.keyboardDOM.contains(e.target);if(n.options.syncInstanceInputs&&Array.isArray(e.path)&&(i=e.path.some((function(e){var t;return e==null||(t=e.hasAttribute)==null?void 0:t.call(e,`data-skInstance`)}))),(t===`textarea`||t===`input`&&[`text`,`search`,`url`,`tel`,`password`].includes(e.target.type))&&!r.options.disableCaretPositioning){var a=e.target.selectionStart,o=e.target.selectionEnd;r.options.rtl&&(a=r.utilities.getRtlOffset(a,r.getInput()),o=r.utilities.getRtlOffset(o,r.getInput())),r.setCaretPosition(a,o),r.activeInputElement=e.target,r.options.debug&&console.log(`Caret at: `,r.getCaretPosition(),r.getCaretPositionEnd(),e&&e.target.tagName.toLowerCase(),`(${r.keyboardDOMClass})`,e?.type)}else !r.options.disableCaretPositioning&&i||e?.type===`selectionchange`||(r.setCaretPosition(null),r.activeInputElement=null,r.options.debug&&console.log(`Caret position reset due to "${e?.type}" event`,e))}))}},{key:`recurseButtons`,value:function(e){var t=this;e&&Object.keys(this.buttonElements).forEach((function(n){return t.buttonElements[n].forEach(e)}))}},{key:`destroy`,value:function(){this.options.debug&&console.log(`Destroying simple-keyboard instance: ${this.currentInstanceName}`);var e=this.options.physicalKeyboardHighlightPreventDefault,t=e!==void 0&&e;document.removeEventListener(`keyup`,this.handleKeyUp,t),document.removeEventListener(`keydown`,this.handleKeyDown,t),document.removeEventListener(`mouseup`,this.handleMouseUp),document.removeEventListener(`touchend`,this.handleTouchEnd),document.removeEventListener(`select`,this.handleSelect),this.options.updateCaretOnSelectionChange&&document.removeEventListener(`selectionchange`,this.handleSelectionChange),document.onpointerup=null,document.ontouchend=null,document.ontouchcancel=null,document.onmouseup=null,this.recurseButtons((function(e){e&&=(e.onpointerdown=null,e.onpointerup=null,e.onpointercancel=null,e.ontouchstart=null,e.ontouchend=null,e.ontouchcancel=null,e.onclick=null,e.onmousedown=null,e.onmouseup=null,e.remove(),null)})),this.keyboardDOM.onpointerdown=null,this.keyboardDOM.ontouchstart=null,this.keyboardDOM.onmousedown=null,this.resetRows(),this.candidateBox&&=(this.candidateBox.destroy(),null),this.activeInputElement=null,this.keyboardDOM.removeAttribute(`data-skInstance`),this.keyboardDOM.innerHTML=``,window.SimpleKeyboardInstances[this.currentInstanceName]=null,delete window.SimpleKeyboardInstances[this.currentInstanceName],this.initialized=!1}},{key:`getButtonThemeClasses`,value:function(e){var t=this.options.buttonTheme,n=[];return Array.isArray(t)&&t.forEach((function(t){if(t&&t.class&&typeof t.class==`string`&&t.buttons&&typeof t.buttons==`string`){var r=t.class.split(` `);t.buttons.split(` `).includes(e)&&(n=[].concat(C(n),C(r)))}else console.warn(`Incorrect "buttonTheme". Please check the documentation.`,t)})),n}},{key:`setDOMButtonAttributes`,value:function(e,t){var n=this.options.buttonAttributes;Array.isArray(n)&&n.forEach((function(n){n.attribute&&typeof n.attribute==`string`&&n.value&&typeof n.value==`string`?n.buttons&&typeof n.buttons==`string`?n.buttons.split(` `).includes(e)&&t(n.attribute,n.value):t(n.attribute,n.value):console.warn(`Incorrect "buttonAttributes". Please check the documentation.`,n)}))}},{key:`onTouchDeviceDetected`,value:function(){this.processAutoTouchEvents(),this.disableContextualWindow()}},{key:`disableContextualWindow`,value:function(){window.oncontextmenu=function(e){var t;if((t=e.target.classList)!=null&&t.contains(`hg-button`))return e.preventDefault(),e.stopPropagation(),!1}}},{key:`processAutoTouchEvents`,value:function(){this.options.autoUseTouchEvents&&(this.options.useTouchEvents=!0,this.options.debug&&console.log(`autoUseTouchEvents: Touch device detected, useTouchEvents enabled.`))}},{key:`onInit`,value:function(){this.options.debug&&console.log(`${this.keyboardDOMClass} Initialized`),this.setEventListeners(),typeof this.options.onInit==`function`&&this.options.onInit(this)}},{key:`beforeFirstRender`,value:function(){this.utilities.isTouchDevice()&&this.onTouchDeviceDetected(),typeof this.options.beforeFirstRender==`function`&&this.options.beforeFirstRender(this),this.isFirstKeyboardInstance&&this.utilities.pointerEventsSupported()&&!this.options.useTouchEvents&&!this.options.useMouseEvents&&this.options.debug&&console.log(`Using PointerEvents as it is supported by this browser`),this.options.useTouchEvents&&this.options.debug&&console.log(`useTouchEvents has been enabled. Only touch events will be used.`)}},{key:`beforeRender`,value:function(){typeof this.options.beforeRender==`function`&&this.options.beforeRender(this)}},{key:`onRender`,value:function(){typeof this.options.onRender==`function`&&this.options.onRender(this)}},{key:`onModulesLoaded`,value:function(){typeof this.options.onModulesLoaded==`function`&&this.options.onModulesLoaded(this)}},{key:`loadModules`,value:function(){var e=this;Array.isArray(this.options.modules)&&(this.options.modules.forEach((function(t){var n=e.utilities.isConstructor(t)?new t(e):t(e);n.init&&n.init(e)})),this.keyboardPluginClasses=`modules-loaded`,this.render(),this.onModulesLoaded())}},{key:`getModuleProp`,value:function(e,t){return!!this.modules[e]&&this.modules[e][t]}},{key:`getModulesList`,value:function(){return Object.keys(this.modules)}},{key:`parseRowDOMContainers`,value:function(e,t,n,r){var i=this,a=Array.from(e.children),o=0;return a.length&&n.forEach((function(n,s){var c=r[s];if(!(c&&c>n))return!1;var l=n-o,u=c-o,d=document.createElement(`div`);d.className+=`hg-button-container`;var f=`${i.options.layoutName}-r${t}c${s}`;d.setAttribute(`data-skUID`,f);var p=a.splice(l,u-l+1);o+=u-l,p.forEach((function(e){return d.appendChild(e)})),a.splice(l,0,d),e.innerHTML=``,a.forEach((function(t){return e.appendChild(t)})),i.options.debug&&console.log(`rowDOMContainer`,p,l,u,o+1)})),e}},{key:`render`,value:function(){var e=this;this.resetRows(),this.initialized||this.beforeFirstRender(),this.beforeRender();var t=`hg-layout-${this.options.layoutName}`,n=this.options.layout||{default:["` 1 2 3 4 5 6 7 8 9 0 - = {bksp}",`{tab} q w e r t y u i o p [ ] \\`,`{lock} a s d f g h j k l ; ' {enter}`,`{shift} z x c v b n m , . / {shift}`,`.com @ {space}`],shift:[`~ ! @ # $ % ^ & * ( ) _ + {bksp}`,`{tab} Q W E R T Y U I O P { } |`,`{lock} A S D F G H J K L : " {enter}`,`{shift} Z X C V B N M < > ? {shift}`,`.com @ {space}`]},r=this.options.useTouchEvents||!1,i=r?`hg-touch-events`:``,a=this.options.useMouseEvents||!1,o=this.options.disableRowButtonContainers;this.keyboardDOM.className=this.getKeyboardClassString(this.options.theme,t,this.keyboardPluginClasses,i),this.keyboardDOM.setAttribute(`data-skInstance`,this.currentInstanceName),this.keyboardRowsDOM=document.createElement(`div`),this.keyboardRowsDOM.className=`hg-rows`,n[this.options.layoutName||this.defaultName].forEach((function(t,n){var i=t.split(` `);e.options.excludeFromLayout&&e.options.excludeFromLayout[e.options.layoutName||e.defaultName]&&(i=i.filter((function(t){return e.options.excludeFromLayout&&!e.options.excludeFromLayout[e.options.layoutName||e.defaultName].includes(t)})));var s=document.createElement(`div`);s.className+=`hg-row`;var c=[],l=[];i.forEach((function(t,i){var u,d=!o&&typeof t==`string`&&t.length>1&&t.indexOf(`[`)===0,f=!o&&typeof t==`string`&&t.length>1&&t.indexOf(`]`)===t.length-1;d&&(c.push(i),t=t.replace(/\[/g,``)),f&&(l.push(i),t=t.replace(/\]/g,``));var p=e.utilities.getButtonClass(t),m=e.utilities.getButtonDisplayName(t,e.options.display,e.options.mergeDisplay),h=e.options.useButtonTag?`button`:`div`,g=document.createElement(h);g.className+=`hg-button ${p}`,(u=g.classList).add.apply(u,C(e.getButtonThemeClasses(t))),e.setDOMButtonAttributes(t,(function(e,t){g.setAttribute(e,t)})),e.activeButtonClass=`hg-activeButton`,!e.utilities.pointerEventsSupported()||r||a?r?(g.ontouchstart=function(n){e.handleButtonClicked(t,n),e.handleButtonMouseDown(t,n)},g.ontouchend=function(n){e.handleButtonMouseUp(t,n)},g.ontouchcancel=function(n){e.handleButtonMouseUp(t,n)}):(g.onclick=function(n){e.setMouseHold(!1),typeof e.options.onKeyReleased==`function`||e.options.useMouseEvents&&e.options.clickOnMouseDown||e.handleButtonClicked(t,n)},g.onmousedown=function(n){(typeof e.options.onKeyReleased==`function`||e.options.useMouseEvents&&e.options.clickOnMouseDown)&&!e.isMouseHold&&e.handleButtonClicked(t,n),e.handleButtonMouseDown(t,n)},g.onmouseup=function(n){e.handleButtonMouseUp(t,n)}):(g.onpointerdown=function(n){e.handleButtonClicked(t,n),e.handleButtonMouseDown(t,n)},g.onpointerup=function(n){e.handleButtonMouseUp(t,n)},g.onpointercancel=function(n){e.handleButtonMouseUp(t,n)}),g.setAttribute(`data-skBtn`,t);var _=`${e.options.layoutName}-r${n}b${i}`;g.setAttribute(`data-skBtnUID`,_);var v=document.createElement(`span`);v.innerHTML=m,g.appendChild(v),e.buttonElements[t]||(e.buttonElements[t]=[]),e.buttonElements[t].push(g),s.appendChild(g)})),s=e.parseRowDOMContainers(s,n,c,l),e.keyboardRowsDOM.appendChild(s)})),this.keyboardDOM.appendChild(this.keyboardRowsDOM),this.onRender(),this.initialized||(this.initialized=!0,!this.utilities.pointerEventsSupported()||r||a?r?(document.ontouchend=function(t){return e.handleButtonMouseUp(void 0,t)},document.ontouchcancel=function(t){return e.handleButtonMouseUp(void 0,t)},this.keyboardDOM.ontouchstart=function(t){return e.handleKeyboardContainerMouseDown(t)}):r||(document.onmouseup=function(t){return e.handleButtonMouseUp(void 0,t)},this.keyboardDOM.onmousedown=function(t){return e.handleKeyboardContainerMouseDown(t)}):(document.onpointerup=function(t){return e.handleButtonMouseUp(void 0,t)},this.keyboardDOM.onpointerdown=function(t){return e.handleKeyboardContainerMouseDown(t)}),this.onInit())}}],t&&D(e.prototype,t),n&&D(e,n),Object.defineProperty(e,"prototype",{writable:!1}),e;var e,t,n}(),j=A;return r}()},442:function(t){t.exports=e}},n={};function r(e){var i=n[e];if(i!==void 0)return i.exports;var a=n[e]={exports:{}};return t[e].call(a.exports,a,a.exports,r),a.exports}r.n=function(e){var t=e&&e.__esModule?function(){return e.default}:function(){return e};return r.d(t,{a:t}),t},r.d=function(e,t){for(var n in t)r.o(t,n)&&!r.o(e,n)&&Object.defineProperty(e,n,{enumerable:!0,get:t[n]})},r.o=function(e,t){return Object.prototype.hasOwnProperty.call(e,t)},r.r=function(e){typeof Symbol<`u`&&Symbol.toStringTag&&Object.defineProperty(e,Symbol.toStringTag,{value:`Module`}),Object.defineProperty(e,"__esModule",{value:!0})};var i={};return function(){r.r(i),r.d(i,{KeyboardReact:function(){return u},default:function(){return d}}),r(981);var e=r(442),t=r(548),n=r.n(t);function a(e){return a=typeof Symbol==`function`&&typeof Symbol.iterator==`symbol`?function(e){return typeof e}:function(e){return e&&typeof Symbol==`function`&&e.constructor===Symbol&&e!==Symbol.prototype?`symbol`:typeof e},a(e)}function o(e,t){var n=Object.keys(e);if(Object.getOwnPropertySymbols){var r=Object.getOwnPropertySymbols(e);t&&(r=r.filter((function(t){return Object.getOwnPropertyDescriptor(e,t).enumerable}))),n.push.apply(n,r)}return n}function s(e){for(var t=1;t<arguments.length;t++){var n=arguments[t]==null?{}:arguments[t];t%2?o(Object(n),!0).forEach((function(t){c(e,t,n[t])})):Object.getOwnPropertyDescriptors?Object.defineProperties(e,Object.getOwnPropertyDescriptors(n)):o(Object(n)).forEach((function(t){Object.defineProperty(e,t,Object.getOwnPropertyDescriptor(n,t))}))}return e}function c(e,t,n){return(t=function(e){var t=function(e,t){if(a(e)!=`object`||!e)return e;var n=e[Symbol.toPrimitive];if(n!==void 0){var r=n.call(e,t||`default`);if(a(r)!=`object`)return r;throw TypeError(`@@toPrimitive must return a primitive value.`)}return(t===`string`?String:Number)(e)}(e,`string`);return a(t)==`symbol`?t:t+``}(t))in e?Object.defineProperty(e,t,{value:n,enumerable:!0,configurable:!0,writable:!0}):e[t]=n,e}var l=function(e){return s(s({},e),{},{keyboardRef:null})},u=function(t){var r=t.baseClass||`react-simple-keyboard`,i=e.useRef(null),a=e.useRef(null),o=e.useRef(null),c=e.useRef(t);return e.useEffect((function(){return function(){o.current&&o.current.destroy(),i.current=!1}}),[]),e.useEffect((function(){var e=function(e){return s(s({},e),{},{theme:`simple-keyboard ${e.theme||`hg-theme-default`}`})}(t);if(!i.current){i.current=!0,e.debug&&console.log(`ReactSimpleKeyboard: Init`);var u=a.current,d=`.${r}`;o.current=new(n())(u||d,e),e.keyboardRef&&e.keyboardRef(o.current)}var f=function(e,t){var n=l(t),r=l(e);return Object.keys(n).filter((function(e){return n[e]!==r[e]}))}(c.current,e);if(f.length){var p=o.current;c.current=e,p?.setOptions(e),e.debug&&console.log(`ReactSimpleKeyboard - setOptions called due to updated props:`,f)}}),[i,r,c,t]),e.createElement(`div`,{className:r,ref:a})},d=u}(),i}()}))}))(),1);function W0e(e,t=[]){if(H9(e))return e;if(typeof e==`object`&&e){let n=e;if(H9(n.default))return n.default;for(let e of t)if(H9(n[e]))return n[e]}return e}function H9(e){return typeof e==`function`||typeof e==`string`?!0:typeof e==`object`&&!!e&&`$$typeof`in e}var G0e=W0e(U0e.default,[`KeyboardReact`]),K0e=new Set([`text`,`password`,`email`,`search`,`url`,`number`]);function U9(e,t){(Object.getOwnPropertyDescriptor(HTMLInputElement.prototype,`value`)?.set??Object.getOwnPropertyDescriptor(HTMLTextAreaElement.prototype,`value`)?.set)?.call(e,t),e.dispatchEvent(new Event(`input`,{bubbles:!0}))}function q0e({onVisibilityChange:e}){let[t,n]=(0,y.useState)(!1),[r,i]=(0,y.useState)(!1),a=(0,y.useRef)(!1),[o,s]=(0,y.useState)(`default`),c=(0,y.useRef)(null),l=(0,y.useRef)(null),u=(0,y.useRef)(null);(0,y.useEffect)(()=>{e?.(t)},[t,e]);let d=(0,y.useCallback)(e=>{if(a.current)return;let t=e.target;if(!t.closest(`[data-vkb="false"]`)){if(t instanceof HTMLInputElement){if(!K0e.has(t.type))return}else if(!(t instanceof HTMLTextAreaElement))return;c.current=t,n(!0),s(`default`),l.current?.setInput?.(c.current.value),setTimeout(()=>{(t.closest(`.bg-zinc-800, .rounded-lg, [data-vkb-group]`)??t).scrollIntoView({behavior:`smooth`,block:`nearest`})},100)}},[]),f=(0,y.useCallback)(()=>{setTimeout(()=>{let e=document.activeElement;e&&(u.current?.contains(e)||e===c.current)||(n(!1),c.current=null)},150)},[]);(0,y.useEffect)(()=>(document.addEventListener(`focusin`,d),document.addEventListener(`focusout`,f),()=>{document.removeEventListener(`focusin`,d),document.removeEventListener(`focusout`,f)}),[d,f]);let p=(0,y.useCallback)(()=>{a.current=!0,i(!0),c.current?.blur(),c.current=null,setTimeout(()=>{n(!1),i(!1),a.current=!1},400)},[]),m=(0,y.useCallback)(e=>{let t=c.current;if(t){if(e===`{shift}`){s(e=>e==="default"?`shift`:`default`);return}if(e===`{lock}`){s(e=>e==="default"?`shift`:`default`);return}if(e===`{close}`){p();return}e===`{bksp}`?U9(t,t.value.slice(0,-1)):e===`{space}`?U9(t,t.value+` `):(U9(t,t.value+e),o===`shift`&&s(`default`)),t.focus(),l.current?.setInput?.(t.value)}},[o,p]);return t?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-[9998] bg-transparent`,onMouseDown:e=>{e.preventDefault(),e.stopPropagation(),r||p()},onTouchStart:e=>{e.preventDefault(),e.stopPropagation(),r||p()},onClick:e=>{e.preventDefault(),e.stopPropagation()}}),!r&&(0,G.jsx)(`div`,{ref:u,className:`relative z-[9999] shrink-0`,onMouseDown:e=>e.preventDefault(),onTouchStart:e=>{e.target.closest(`.hg-button`)||e.preventDefault()},children:(0,G.jsx)(G0e,{keyboardRef:e=>{l.current=e},layoutName:o,onKeyPress:m,theme:`simple-keyboard vkb-theme`,layout:{default:[`1 2 3 4 5 6 7 8 9 0 {bksp}`,`q w e r t y u i o p`,`{lock} a s d f g h j k l`,`{shift} z x c v b n m . @`,`{space} {close}`],shift:[`! @ # $ % ^ & * ( ) {bksp}`,`Q W E R T Y U I O P`,`{lock} A S D F G H J K L`,`{shift} Z X C V B N M , _`,`{space} {close}`]},display:{"{bksp}":`⌫`,"{close}":`✕ Close`,"{shift}":`⇧`,"{lock}":`⇪`,"{space}":` `}})})]}):null}function J0e(){Mf();let[e,t]=(0,y.useState)(null),[n,r]=(0,y.useState)(null),[i,a]=(0,y.useState)(100),{i18n:o}=U(),s=or(),c=rr(),l=H0e(),{setViewportSuppressed:u}=Gd();(0,y.useEffect)(()=>(u(!0),()=>u(!1)),[u]);let{data:d}=K({queryKey:[`settings`],queryFn:Z.getSettings});(0,y.useEffect)(()=>{d?.language&&d.language!==o.language&&o.changeLanguage(d.language)},[d?.language,o]);let{data:f=[]}=K({queryKey:[`spoolbuddy-devices`],queryFn:()=>Dd.getDevices(),refetchInterval:3e4}),p=f[0],m=l.deviceOnline||!!p?.online,h=(0,y.useMemo)(()=>({...l,deviceOnline:m}),[l,m]),g=(0,y.useRef)(!1);(0,y.useEffect)(()=>{p&&!g.current&&(a(p.display_brightness),g.current=!0)},[p]),(0,y.useEffect)(()=>{let e=document.documentElement,t=e.classList.contains(`dark`);return e.classList.add(`dark`),()=>{t||e.classList.remove(`dark`)}},[]);let{data:_}=K({queryKey:[`spoolbuddy-update-check`,p?.device_id],queryFn:()=>p?Dd.checkDaemonUpdate(p.device_id):Promise.resolve(null),enabled:!!p,refetchInterval:300*1e3,staleTime:0}),v=(0,y.useRef)(null);(0,y.useEffect)(()=>{if(!m){let e=`SpoolBuddy device disconnected`;r({type:`warning`,message:e}),v.current=e}else if(_?.update_available&&_.latest_version){let e=`Update available: v${_.latest_version}`;r({type:`info`,message:e}),v.current=e}else v.current&&=(r(null),null)},[m,_?.update_available,_?.latest_version]);let b=!!(l.matchedSpool||l.unknownTagUid||l.unknownTrayUuid),x=(0,y.useRef)(!1);(0,y.useEffect)(()=>{b&&!x.current&&c.pathname!==`/spoolbuddy`&&s(`/spoolbuddy`),x.current=b},[b,c.pathname,s]);let{data:S=[]}=K({queryKey:[`printers`],queryFn:()=>Z.getPrinters()}),C=Co({queries:S.map(e=>({queryKey:[`printerStatus`,e.id],queryFn:()=>Z.getPrinterStatus(e.id),refetchInterval:1e4,select:e=>({connected:e?.connected})}))}),w=(0,y.useMemo)(()=>S.filter((e,t)=>C[t]?.data?.connected),[S,C]),T=(0,y.useRef)(null),E=(0,y.useRef)(!1),D=(0,y.useRef)(null),O=(0,y.useCallback)(e=>{T.current={x:e.touches[0].clientX,y:e.touches[0].clientY},E.current=!1},[]),k=(0,y.useCallback)(n=>{if(!T.current)return;let r=n.changedTouches[0].clientX-T.current.x,i=n.changedTouches[0].clientY-T.current.y,a=T.current.y;if(T.current=null,E.current=!1,i>=50&&Math.abs(i)>Math.abs(r)&&a<120){N(!0);return}if(w.length<2||Math.abs(r)<50||Math.abs(i)>Math.abs(r))return;let o=w.findIndex(t=>t.id===e);t(w[r<0?(o+1)%w.length:(o-1+w.length)%w.length].id)},[w,e,t]);(0,y.useEffect)(()=>{let e=D.current;if(!e)return;let t=e=>{if(!T.current)return;let t=Math.abs(e.touches[0].clientX-T.current.x),n=Math.abs(e.touches[0].clientY-T.current.y);if(E.current){e.preventDefault();return}t>10&&t>n&&(E.current=!0,e.preventDefault())};return e.addEventListener(`touchmove`,t,{passive:!1}),()=>e.removeEventListener(`touchmove`,t)},[]);let[A,j]=(0,y.useState)(!1),[M,N]=(0,y.useState)(!1);return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{ref:D,"data-spoolbuddy-kiosk":!0,className:`w-screen h-screen bg-bambu-dark text-white flex flex-col overflow-hidden`,style:{...i<100?{filter:`brightness(${i/100})`}:void 0,overscrollBehaviorX:`none`},onTouchStart:O,onTouchEnd:k,children:[(0,G.jsx)(`button`,{onClick:()=>N(!0),className:`w-full h-1.5 bg-bambu-dark-secondary flex justify-center items-center shrink-0 touch-none`,"aria-label":`Open quick menu`,children:(0,G.jsx)(`div`,{className:`w-8 h-0.5 rounded-full bg-zinc-600`})}),(0,G.jsx)(F0e,{selectedPrinterId:e,onPrinterChange:t,deviceOnline:m}),(0,G.jsx)(`main`,{className:`flex-1 overflow-y-auto`,children:(0,G.jsx)(Ir,{context:{selectedPrinterId:e,setSelectedPrinterId:t,sbState:h,setAlert:r,displayBrightness:i,setDisplayBrightness:a}})}),!A&&(0,G.jsx)(R0e,{alert:n}),!A&&(0,G.jsx)(L0e,{}),(0,G.jsx)(q0e,{onVisibilityChange:j})]}),(0,G.jsx)(z0e,{isOpen:M,onClose:()=>N(!1),deviceId:p?.device_id??null,deviceOnline:m})]})}function W9({color:e,isEmpty:t,size:n=32}){return t?(0,G.jsx)(`div`,{className:`rounded-full border-2 border-dashed border-zinc-500 flex items-center justify-center`,style:{width:n,height:n},children:(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full bg-zinc-600`})}):(0,G.jsxs)(`svg`,{width:n,height:n,viewBox:`0 0 32 32`,children:[(0,G.jsx)(`circle`,{cx:`16`,cy:`16`,r:`14`,fill:e,stroke:`white`,strokeWidth:`1.5`,strokeOpacity:`0.7`}),(0,G.jsx)(`circle`,{cx:`16`,cy:`16`,r:`11`,fill:e,style:{filter:`brightness(0.85)`}})]})}var Y0e=`spoolbuddy-default-core-weight`;function X0e(){try{let e=localStorage.getItem(Y0e);if(e){let t=parseInt(e,10);if(t>=0&&t<=500)return t}}catch{}return 250}function Z0e({spool:e,scaleWeight:t,onClose:n,onSyncWeight:r,onAssignToAms:i,isAssigned:a,onUnassignFromAms:o}){let{t:s}=U(),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(!1),f=Df(e.rgba),p=Ef(e.color_name,e.rgba,e.color_name_is_synthesized),m=e.core_weight&&e.core_weight>0?e.core_weight:X0e(),h=t===null?null:Math.round(Math.max(0,t)),g=h===null?null:Math.round(Math.max(0,h-m)),_=Math.round(e.label_weight||1e3),v=g===null?null:Math.min(100,Math.round(g/_*100)),b=v===null?`#808080`:v>50?`#22c55e`:v>20?`#eab308`:`#ef4444`,x=Math.max(0,(e.label_weight||0)-(e.weight_used||0))+m,S=h===null?null:h-x,C=S===null?null:Math.abs(S)<=50,w=async()=>{if(t!==null){l(!0);try{await Dd.updateSpoolWeight(e.id,Math.round(t)),d(!0),r?.(),setTimeout(()=>d(!1),3e3)}catch(e){console.error(`Failed to sync weight:`,e)}finally{l(!1)}}};return(0,G.jsxs)(`div`,{className:`flex flex-col items-center space-y-4 max-w-md`,children:[(0,G.jsxs)(`div`,{className:`flex items-start gap-5`,children:[(0,G.jsxs)(`div`,{className:`relative shrink-0`,children:[(0,G.jsx)(W9,{color:f,isEmpty:!1,size:100}),v!==null&&(0,G.jsxs)(`div`,{className:`absolute -bottom-2 -right-2 px-2 py-0.5 rounded-full text-xs font-bold text-white shadow-lg`,style:{backgroundColor:b},children:[v,`%`]})]}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0 pt-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-zinc-100`,children:p||s(`spoolbuddy.spool.unknownColor`)}),(0,G.jsxs)(`span`,{className:`text-xs font-mono text-zinc-500 shrink-0`,children:[`#`,e.id]})]}),(0,G.jsxs)(`p`,{className:`text-sm text-zinc-400`,children:[e.brand,` • `,e.material,e.subtype&&` ${e.subtype}`]}),g!==null&&(0,G.jsxs)(`div`,{className:`mt-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-baseline gap-2`,children:[(0,G.jsxs)(`span`,{className:`text-3xl font-bold font-mono text-zinc-100`,children:[g,`g`]}),(0,G.jsxs)(`span`,{className:`text-sm text-zinc-500`,children:[`/ `,_,`g`]})]}),(0,G.jsx)(`p`,{className:`text-xs text-zinc-500 mt-0.5`,children:s(`spoolbuddy.spool.remaining`,`Remaining`)}),(0,G.jsx)(`div`,{className:`mt-2 max-w-xs`,children:(0,G.jsx)(`div`,{className:`h-2 bg-zinc-700 rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full transition-all duration-500`,style:{width:`${v}%`,backgroundColor:b}})})})]})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-x-6 gap-y-2 text-sm bg-zinc-800 rounded-lg p-4 w-full`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:s(`spoolbuddy.dashboard.grossWeight`,`Gross weight`)}),(0,G.jsx)(`span`,{className:`font-mono text-zinc-300`,children:h===null?`—`:`${h}g`})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:s(`spoolbuddy.spool.coreWeight`,`Core`)}),(0,G.jsxs)(`span`,{className:`font-mono text-zinc-300`,children:[m,`g`]})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:s(`spoolbuddy.dashboard.spoolSize`,`Spool size`)}),(0,G.jsxs)(`span`,{className:`font-mono text-zinc-300`,children:[_,`g`]})]}),(0,G.jsxs)(`div`,{className:`flex justify-between items-center`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:s(`spoolbuddy.spool.scaleWeight`,`Scale`)}),h===null?(0,G.jsx)(`span`,{className:`text-zinc-500`,children:`—`}):(0,G.jsxs)(`span`,{className:`flex items-center gap-1 font-mono ${C?`text-green-500`:`text-yellow-500`}`,children:[h,`g`,C?(0,G.jsx)(fs,{className:`w-3.5 h-3.5`}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Iu,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`button`,{onClick:w,className:`p-1 hover:bg-green-500/20 rounded transition-colors text-green-500`,title:s(`spoolbuddy.dashboard.syncWeight`,`Sync Weight`),children:(0,G.jsx)(Vl,{className:`w-4 h-4`})})]})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-between items-center`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:s(`spoolbuddy.dashboard.tagId`,`Tag`)}),(0,G.jsx)(`span`,{className:`font-mono text-xs text-zinc-400 truncate max-w-[120px]`,title:e.tag_uid||``,children:e.tag_uid?e.tag_uid.slice(-8):`—`})]})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 justify-center`,children:[i&&(0,G.jsx)(`button`,{onClick:a?void 0:i,disabled:!!a,className:`px-5 py-2.5 rounded-lg text-sm font-medium bg-green-600 text-white hover:bg-green-700 transition-colors min-h-[44px] disabled:opacity-50 disabled:cursor-not-allowed`,children:s(`spoolbuddy.modal.assignToAms`,`Assign to AMS`)}),o&&(0,G.jsxs)(`button`,{onClick:o,className:`px-5 py-2.5 rounded-lg text-sm font-medium bg-red-600/20 text-red-400 hover:bg-red-600/30 transition-colors min-h-[44px]`,children:[(0,G.jsx)(zu,{className:`w-4 h-4 inline mr-1`}),s(`inventory.unassignSpool`)]}),(0,G.jsx)(`button`,{onClick:w,disabled:t===null||c,className:`px-5 py-2.5 rounded-lg text-sm font-medium transition-colors min-h-[44px] ${u?`bg-green-600/20 text-green-400`:i?`bg-zinc-700 text-zinc-300 hover:bg-zinc-600 disabled:opacity-40 disabled:cursor-not-allowed`:`bg-green-600 text-white hover:bg-green-700 disabled:opacity-40 disabled:cursor-not-allowed`}`,children:c?`...`:u?s(`spoolbuddy.dashboard.weightSynced`,`Synced!`):s(`spoolbuddy.dashboard.syncWeight`,`Sync Weight`)}),n&&(0,G.jsx)(`button`,{onClick:n,className:`px-5 py-2.5 rounded-lg text-sm font-medium bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors min-h-[44px]`,children:s(`spoolbuddy.dashboard.close`,`Close`)})]})]})}function Q0e({tagUid:e,scaleWeight:t,coreWeight:n,onLinkSpool:r,onAddToInventory:i,onClose:a}){let{t:o}=U(),s=n??X0e(),c=t===null?null:Math.round(Math.max(0,t)),l=c===null?null:Math.round(Math.max(0,c-s));return(0,G.jsxs)(`div`,{className:`flex flex-col items-center text-center space-y-5`,children:[(0,G.jsx)(`div`,{className:`w-20 h-20 rounded-2xl bg-green-500/15 flex items-center justify-center`,children:(0,G.jsx)(`svg`,{className:`w-10 h-10 text-green-500`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:`2`,d:`M7 7h.01M7 3h5c.512 0 1.024.195 1.414.586l7 7a2 2 0 010 2.828l-7 7a2 2 0 01-2.828 0l-7-7A2 2 0 013 12V7a4 4 0 014-4z`})})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-zinc-100`,children:o(`spoolbuddy.dashboard.newTag`,`New Tag Detected`)}),(0,G.jsx)(`p`,{className:`text-sm text-zinc-500 font-mono mt-1`,children:e})]}),c!==null&&(0,G.jsxs)(`div`,{className:`text-sm text-zinc-400`,children:[(0,G.jsxs)(`span`,{className:`font-mono font-semibold`,children:[c,`g`]}),` `,o(`spoolbuddy.dashboard.onScale`,`on scale`),l!==null&&l>0&&(0,G.jsxs)(`span`,{className:`text-zinc-500`,children:[` • ~`,l,`g filament`]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-2 justify-center`,children:[i&&(0,G.jsx)(`button`,{onClick:i,className:`px-5 py-2.5 rounded-lg text-sm font-medium bg-green-600 text-white hover:bg-green-700 transition-colors min-h-[44px]`,children:o(`spoolbuddy.modal.addToInventory`,`Add to Inventory`)}),r&&(0,G.jsxs)(`button`,{onClick:r,className:`px-5 py-2.5 rounded-lg text-sm font-medium bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors min-h-[44px]`,children:[(0,G.jsx)(`svg`,{className:`w-4 h-4 inline-block mr-1.5 -mt-0.5`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:`2`,d:`M13.828 10.172a4 4 0 00-5.656 0l-4 4a4 4 0 105.656 5.656l1.102-1.101m-.758-4.899a4 4 0 005.656 0l4-4a4 4 0 00-5.656-5.656l-1.1 1.1`})}),o(`inventory.assignSpool`,`Assign Spool`)]}),a&&(0,G.jsx)(`button`,{onClick:a,className:`px-5 py-2.5 rounded-lg text-sm font-medium bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors min-h-[44px]`,children:o(`spoolbuddy.dashboard.close`,`Close`)})]})]})}function $0e(e){return e?`#${e.slice(0,6)}`:`#808080`}function e2e(e){return!e.tray_type||e.tray_type===``}function t2e(e){if(e.tray_type)return null;if(e.exists===!0)return`reset`;if(e.exists===!1)return`physical`;let t=e.state??null;return t===9||t===10?`physical`:`reset`}function n2e(e){return e<=3?`AMS ${String.fromCharCode(65+e)}`:e>=128&&e<=135?`AMS HT ${String.fromCharCode(65+e-128)}`:`AMS ${e}`}function r2e({className:e}){return(0,G.jsx)(`svg`,{className:e,viewBox:`0 0 36 54`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:(0,G.jsx)(`path`,{d:`M17.8131 0.00538C18.4463 -0.15091 20.3648 3.14642 20.8264 3.84781C25.4187 10.816 35.3089 26.9368 35.9383 34.8694C37.4182 53.5822 11.882 61.3357 2.53721 45.3789C-1.73471 38.0791 0.016 32.2049 3.178 25.0232C6.99221 16.3662 12.6411 7.90372 17.8131 0.00538ZM18.3738 7.24807L17.5881 7.48441C14.4452 12.9431 10.917 18.2341 8.19369 23.9368C4.6808 31.29 1.18317 38.5479 7.69403 45.5657C17.3058 55.9228 34.9847 46.8808 31.4604 32.8681C29.2558 24.0969 22.4207 15.2913 18.3776 7.24807H18.3738Z`,fill:`#C3C2C1`})})}function i2e({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 35 53`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`path`,{d:`M17.3165 0.0038C17.932 -0.14959 19.7971 3.08645 20.2458 3.77481C24.7103 10.6135 34.3251 26.4346 34.937 34.2198C36.3757 52.5848 11.5505 60.1942 2.46584 44.534C-1.68714 37.3735 0.0148 31.6085 3.08879 24.5603C6.79681 16.0605 12.2884 7.75907 17.3165 0.0038ZM17.8615 7.11561L17.0977 7.34755C14.0423 12.7048 10.6124 17.8974 7.96483 23.4941C4.54975 30.7107 1.14949 37.8337 7.47908 44.721C16.8233 54.8856 34.01 46.0117 30.5838 32.2595C28.4405 23.6512 21.7957 15.0093 17.8652 7.11561H17.8615Z`,fill:`#C3C2C1`}),(0,G.jsx)(`path`,{d:`M5.03547 30.112C9.64453 30.4936 11.632 35.7985 16.4154 35.791C19.6339 35.7873 20.2161 33.2283 22.3853 31.6197C31.6776 24.7286 33.5835 37.4894 27.9881 44.4254C18.1878 56.5653 -1.16063 44.6013 5.03917 30.1158L5.03547 30.112Z`,fill:`#1F8FEB`})]})}function a2e({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 36 54`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`path`,{d:`M17.9625 4.48059L4.77216 26.3154L2.08228 40.2175L10.0224 50.8414H23.1594L33.3246 42.1693V30.2455L17.9625 4.48059Z`,fill:`#1F8FEB`}),(0,G.jsx)(`path`,{d:`M17.7948 0.00538C18.4273 -0.15091 20.3438 3.14642 20.8048 3.84781C25.3921 10.816 35.2715 26.9368 35.9001 34.8694C37.3784 53.5822 11.8702 61.3357 2.53562 45.3789C-1.73163 38.0829 0.0134 32.2087 3.1757 25.027C6.98574 16.3662 12.6284 7.90372 17.7948 0.00538ZM18.3549 7.24807L17.57 7.48441C14.4306 12.9431 10.9063 18.2341 8.1859 23.9368C4.67686 31.29 1.18305 38.5479 7.68679 45.5657C17.2881 55.9228 34.9476 46.8808 31.4271 32.8681C29.2249 24.0969 22.3974 15.2913 18.3587 7.24807H18.3549Z`,fill:`#C3C2C1`})]})}function o2e({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 12 20`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`path`,{d:`M6 0.5C4.6 0.5 3.5 1.6 3.5 3V12.1C2.6 12.8 2 13.9 2 15C2 17.2 3.8 19 6 19C8.2 19 10 17.2 10 15C10 13.9 9.4 12.8 8.5 12.1V3C8.5 1.6 7.4 0.5 6 0.5Z`,stroke:`#C3C2C1`,strokeWidth:`1`,fill:`none`}),(0,G.jsx)(`circle`,{cx:`6`,cy:`15`,r:`2.5`,stroke:`#C3C2C1`,strokeWidth:`1`,fill:`none`})]})}function s2e({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 12 20`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`rect`,{x:`4.5`,y:`8`,width:`3`,height:`4.5`,fill:`#d4a017`,rx:`0.5`}),(0,G.jsx)(`circle`,{cx:`6`,cy:`15`,r:`2`,fill:`#d4a017`}),(0,G.jsx)(`path`,{d:`M6 0.5C4.6 0.5 3.5 1.6 3.5 3V12.1C2.6 12.8 2 13.9 2 15C2 17.2 3.8 19 6 19C8.2 19 10 17.2 10 15C10 13.9 9.4 12.8 8.5 12.1V3C8.5 1.6 7.4 0.5 6 0.5Z`,stroke:`#C3C2C1`,strokeWidth:`1`,fill:`none`})]})}function c2e({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 12 20`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`rect`,{x:`4.5`,y:`3`,width:`3`,height:`9.5`,fill:`#c62828`,rx:`0.5`}),(0,G.jsx)(`circle`,{cx:`6`,cy:`15`,r:`2`,fill:`#c62828`}),(0,G.jsx)(`path`,{d:`M6 0.5C4.6 0.5 3.5 1.6 3.5 3V12.1C2.6 12.8 2 13.9 2 15C2 17.2 3.8 19 6 19C8.2 19 10 17.2 10 15C10 13.9 9.4 12.8 8.5 12.1V3C8.5 1.6 7.4 0.5 6 0.5Z`,stroke:`#C3C2C1`,strokeWidth:`1`,fill:`none`})]})}function l2e({humidity:e,goodThreshold:t=40,fairThreshold:n=60}){let r,i;return e<=t?(r=`#22a352`,i=r2e):e<=n?(r=`#d4a017`,i=i2e):(r=`#c62828`,i=a2e),(0,G.jsxs)(`div`,{className:`flex items-center gap-0.5`,children:[(0,G.jsx)(i,{className:`w-3 h-3.5`}),(0,G.jsxs)(`span`,{className:`font-medium tabular-nums text-xs`,style:{color:r},children:[e,`%`]})]})}function u2e({temp:e,goodThreshold:t=28,fairThreshold:n=35}){let r,i;return e<=t?(r=`#22a352`,i=o2e):e<=n?(r=`#d4a017`,i=s2e):(r=`#c62828`,i=c2e),(0,G.jsxs)(`div`,{className:`flex items-center gap-0.5`,children:[(0,G.jsx)(i,{className:`w-3 h-3.5`}),(0,G.jsxs)(`span`,{className:`font-medium tabular-nums text-xs`,style:{color:r},children:[e,`°C`]})]})}function G9({side:e}){return(0,G.jsx)(`span`,{className:`inline-flex items-center justify-center w-4 h-4 text-[9px] font-bold rounded`,style:{backgroundColor:`#1a4d2e`,color:`#00ae42`},children:e})}function d2e({tray:e,slotIndex:t,isActive:n,fillOverride:r,spoolmanFill:i,onClick:a}){let o=e2e(e),s=t2e(e),c=$0e(e.tray_color),l=e.remain!==null&&e.remain!==void 0&&e.remain>=0?e.remain:null,u=i??(r===0&&l!==null&&l>0?null:r)??l;return(0,G.jsxs)(`div`,{className:`relative flex flex-col items-center p-2.5 rounded-lg transition-all ${n?`ring-2 ring-bambu-green`:``} ${a?`cursor-pointer hover:bg-white/5`:``}`,onClick:a,title:a?`AMS Slot ${t+1}`:void 0,children:[(0,G.jsxs)(`div`,{className:`relative w-16 h-16 mb-1`,children:[o?(0,G.jsx)(`div`,{className:`w-full h-full rounded-full border-2 border-dashed border-gray-500 flex items-center justify-center`,children:(0,G.jsx)(`div`,{className:`w-3 h-3 rounded-full bg-gray-600`})}):(0,G.jsxs)(`svg`,{viewBox:`0 0 56 56`,className:`w-full h-full`,children:[(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`26`,fill:c}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`20`,fill:c,style:{filter:`brightness(0.85)`}}),(0,G.jsx)(`ellipse`,{cx:`20`,cy:`20`,rx:`6`,ry:`4`,fill:`white`,opacity:`0.3`}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`8`,fill:`#2d2d2d`}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`5`,fill:`#1a1a1a`})]}),n&&(0,G.jsx)(`div`,{className:`absolute -bottom-1 left-1/2 -translate-x-1/2 w-2.5 h-2.5 bg-bambu-green rounded-full`})]}),(0,G.jsx)(`span`,{className:`text-sm text-white/70 truncate max-w-full`,title:s===`reset`?`Spool loaded — slot not configured`:void 0,children:o?s===`reset`?`?`:`Empty`:e.tray_type||`Unknown`}),!o&&u!==null&&u>=0&&(0,G.jsx)(`div`,{className:`w-full h-1 bg-bambu-dark-tertiary rounded-full overflow-hidden mt-1`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full transition-all`,style:{width:`${u}%`,backgroundColor:Ap(u)}})}),(0,G.jsx)(`span`,{className:`absolute top-1 right-1 text-xs text-white/30`,children:t+1})]})}function f2e({unit:e,activeSlot:t,onConfigureSlot:n,isDualNozzle:r,nozzleSide:i,thresholds:a,fillOverrides:o,spoolmanFillOverrides:s}){let c=e.tray||[],l=e.is_ams_ht,u=l?1:4;return(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg p-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(`span`,{className:`text-white font-medium text-base`,children:n2e(e.id)}),r&&i&&(0,G.jsx)(G9,{side:i})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[e.temp!=null&&(0,G.jsx)(u2e,{temp:e.temp,goodThreshold:a?.tempGood,fairThreshold:a?.tempFair}),e.humidity!=null&&(0,G.jsx)(l2e,{humidity:e.humidity,goodThreshold:a?.humidityGood,fairThreshold:a?.humidityFair})]})]}),(0,G.jsx)(`div`,{className:`grid ${l?`grid-cols-1 max-w-[100px] mx-auto`:`grid-cols-4`} gap-2`,children:Array.from({length:u}).map((r,i)=>{let a=c[i]||{id:i,tray_color:null,tray_type:``,tray_sub_brands:null,tray_id_name:null,tray_info_idx:null,remain:-1,k:null,cali_idx:null,tag_uid:null,tray_uuid:null,nozzle_temp_min:null,nozzle_temp_max:null};return(0,G.jsx)(d2e,{tray:a,slotIndex:i,isActive:t===i,fillOverride:o?.[`${e.id}-${i}`]??null,spoolmanFill:s?.[`${e.id}-${i}`]??null,onClick:n?()=>n(e.id,i,e2e(a)?null:a):void 0},i)})})]})}function K9(e){return e<=3?`AMS ${String.fromCharCode(65+e)}`:e>=128&&e<=135?`AMS HT ${String.fromCharCode(65+e-128)}`:`AMS ${e}`}function q9(e){return!e.tray_type||e.tray_type===``}function p2e(e){return e?`#${e.slice(0,6)}`:`#808080`}var J9=e=>(e??``).trim().toUpperCase();function m2e(e,t){let n=J9(e),r=J9(t);return!n||!r?`none`:n===r?`exact`:r.includes(n)||n.includes(r)?`partial`:`none`}function h2e(e,t){let n=J9(e),r=J9(t);return!n||!r?!1:n===r}function g2e({isOpen:e,onClose:t,spool:n,printerId:r,spoolmanMode:i=!1}){let{t:a}=U(),o=co(),[s,c]=(0,y.useState)(null),[l,u]=(0,y.useState)(null),[d,f]=(0,y.useState)(!1),[p,m]=(0,y.useState)(null),[h,g]=(0,y.useState)(null);(0,y.useEffect)(()=>{e&&(c(null),u(null),f(!1),m(null),g(null))},[e]);let _=(0,y.useCallback)(e=>{e.key===`Escape`&&t()},[t]);(0,y.useEffect)(()=>(e&&document.addEventListener(`keydown`,_),()=>document.removeEventListener(`keydown`,_)),[e,_]);let{data:v}=K({queryKey:[`printerStatus`,r],queryFn:()=>Z.getPrinterStatus(r),enabled:e&&r!==null,refetchInterval:5e3}),{data:b}=K({queryKey:[`printer`,r],queryFn:()=>Z.getPrinter(r),enabled:e&&r!==null}),{data:x}=K({queryKey:[`settings`],queryFn:()=>Z.getSettings(),enabled:e,staleTime:300*1e3}),{data:S}=K({queryKey:[`spool-assignments`,r],queryFn:()=>Z.getAssignments(r),enabled:e&&r!==null,staleTime:30*1e3}),{data:C=[]}=K({queryKey:[`spoolman-slot-assignments`,r],queryFn:()=>Z.getSpoolmanSlotAssignments(r??void 0),enabled:e&&!!i&&r!==null,staleTime:30*1e3}),w=i?C.find(e=>e.spoolman_spool_id===n.id):void 0,T=(0,y.useMemo)(()=>{let e={};if(!S)return e;for(let t of S){let n=t.spool;if(n&&n.label_weight>0&&n.weight_used!=null){let r=Math.round(Math.max(0,n.label_weight-n.weight_used)/n.label_weight*100);e[`${t.ams_id}-${t.tray_id}`]=r}}return e},[S]),E=x?{humidityGood:Number(x.ams_humidity_good)||40,humidityFair:Number(x.ams_humidity_fair)||60,tempGood:Number(x.ams_temp_good)||28,tempFair:Number(x.ams_temp_fair)||35}:void 0,D=v?.connected??!1,O=(0,y.useMemo)(()=>v?.ams??[],[v?.ams]),k=(0,y.useMemo)(()=>O.filter(e=>!e.is_ams_ht),[O]),A=(0,y.useMemo)(()=>O.filter(e=>e.is_ams_ht),[O]),j=(0,y.useMemo)(()=>[...v?.vt_tray??[]].sort((e,t)=>(e.id??254)-(t.id??254)),[v?.vt_tray]),M=b?.nozzle_count===2||v?.temperatures?.nozzle_2!==void 0,N=(0,y.useRef)({});(0,y.useEffect)(()=>{v?.ams_extruder_map&&Object.keys(v.ams_extruder_map).length>0&&(N.current=v.ams_extruder_map)},[v?.ams_extruder_map]);let P=v?.ams_extruder_map&&Object.keys(v.ams_extruder_map).length>0?v.ams_extruder_map:N.current,F=v?.fila_switch?.installed===!0,I=(0,y.useCallback)(e=>{if(!M)return null;let t=P[String(e)];return t===void 0?F?null:(e>=128?e-128:e)===1?`L`:`R`:t===1?`L`:`R`},[M,P,F]),L=q({mutationFn:async({amsId:e,trayId:t})=>{if(!r)throw Error(`No printer selected`);return i?await Z.assignSpoolmanSlot({spoolman_spool_id:n.id,printer_id:r,ams_id:e,tray_id:t}):await Z.assignSpool({spool_id:n.id,printer_id:r,ams_id:e,tray_id:t})},onSuccess:e=>{u(`success`);let n=e&&`pending_config`in e&&e.pending_config;c(n?a(`spoolbuddy.modal.assignPendingInsert`,`Assigned. Slot will configure when you insert the spool.`):a(`spoolbuddy.modal.assignSuccess`,`Assigned!`)),o.invalidateQueries({queryKey:[`slotPresets`]}),o.invalidateQueries({queryKey:[`spoolman-slot-assignments`]}),o.invalidateQueries({queryKey:[`spoolman-slot-assignments-all`]}),setTimeout(()=>t(),n?2500:1500)},onError:e=>{u(`error`),c(e instanceof Error?e.message:a(`spoolbuddy.modal.assignError`,`Failed to assign spool.`))}}),R=L.isPending,z=(0,y.useCallback)((e,t)=>{if(e===254||e===255){let n=e===254?254:254+t;return j.find(e=>(e.id??254)===n)||null}return O.find(t=>t.id===e)?.tray?.find(e=>e.id===t)||null},[O,j]),B=(0,y.useCallback)((e,t)=>e<=3?`${K9(e)} ${a(`ams.slot`,`Slot`)} ${t+1}`:e>=128&&e<=135?K9(e):e===254?a(`printers.extL`,`Ext-L`):M?a(`printers.extR`,`Ext-R`):a(`printers.ext`,`Ext`),[a,M]),V=(0,y.useCallback)((e,t)=>{u(`info`),c(a(`spoolbuddy.modal.assigning`,`Configuring slot...`)),L.mutate({amsId:e,trayId:t})},[L,a]),ee=(0,y.useCallback)((e,t)=>{if(!R){if(!x?.disable_filament_warnings){let r=z(e,t);if(r&&!q9(r)){let i=r.tray_sub_brands||r.tray_type||``,a=m2e(n.material,i),o=n.slicer_filament_name||n.slicer_filament,s=r.tray_type||``,c=h2e(o,s);if(a!==`exact`){let r;r=a===`none`&&!c?`material_profile`:a===`partial`&&!c?`partial_profile`:a===`none`?`material`:`partial`;let l=B(e,t);g({amsId:e,trayId:t}),m({type:r,spoolMaterial:n.material||``,trayMaterial:i||``,spoolProfile:o||void 0,trayProfile:s||void 0,location:l}),f(!0);return}}}V(e,t)}},[R,x?.disable_filament_warnings,n,z,B,V]),te=(0,y.useCallback)(()=>{h&&(f(!1),m(null),V(h.amsId,h.trayId),g(null))},[h,V]),ne=(0,y.useMemo)(()=>{let e=[];for(let t of A){let n=t.tray?.[0]||{id:0,tray_color:null,tray_type:``,tray_sub_brands:null,tray_id_name:null,tray_info_idx:null,remain:-1,k:null,cali_idx:null,tag_uid:null,tray_uuid:null,nozzle_temp_min:null,nozzle_temp_max:null},r=T[`${t.id}-0`]??null,i=n.remain!=null&&n.remain>=0?n.remain:null,a=r===0&&i!==null&&i>0?null:r;e.push({key:`ht-${t.id}`,label:K9(t.id),amsId:t.id,trayId:0,tray:n,isEmpty:q9(n),nozzleSide:I(t.id),effectiveFill:a??i})}for(let t of j){let n=t.id??254,r=n-254,i=T[`255-${r}`]??null,o=t.remain!=null&&t.remain>=0?t.remain:null,s=i===0&&o!==null&&o>0?null:i;e.push({key:`ext-${n}`,label:M?n===254?a(`printers.extL`,`Ext-L`):a(`printers.extR`,`Ext-R`):a(`printers.ext`,`Ext`),amsId:255,trayId:r,tray:t,isEmpty:q9(t),nozzleSide:M?n===254?`L`:`R`:null,effectiveFill:s??o})}return e},[A,j,M,a,I,T]);return e?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`fixed inset-0 z-[60] bg-bambu-dark flex flex-col`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-5 py-3 border-b border-zinc-800 shrink-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 min-w-0`,children:[(0,G.jsx)(`div`,{className:`w-7 h-7 rounded-full shrink-0`,style:kf(n.rgba)}),(0,G.jsx)(`div`,{className:`min-w-0`,children:(0,G.jsxs)(`h2`,{className:`text-sm font-semibold text-zinc-100 truncate`,children:[a(`spoolbuddy.modal.assignToAmsTitle`,`Assign to AMS`),(0,G.jsxs)(`span`,{className:`font-normal text-zinc-500 ml-2`,children:[Ef(n.color_name,n.rgba,n.color_name_is_synthesized)||a(`spoolbuddy.spool.unknownColor`),` `,`• `,n.brand,` `,n.material,n.subtype&&` ${n.subtype}`]}),(0,G.jsxs)(`span`,{className:`text-[10px] font-mono text-zinc-500 ml-2 shrink-0`,children:[`#`,n.id]})]})})]}),(0,G.jsx)(`button`,{onClick:t,disabled:R,className:`p-2 rounded-lg text-zinc-500 hover:text-zinc-300 hover:bg-zinc-800 transition-colors shrink-0 disabled:opacity-50`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),s&&(0,G.jsxs)(`div`,{className:`mx-5 mt-3 p-3 rounded-lg flex items-center gap-3 border shrink-0 ${l===`info`?`bg-blue-500/10 border-blue-500/40`:l===`success`?`bg-green-500/10 border-green-500/40`:`bg-red-500/10 border-red-500/40`}`,children:[l===`info`&&(0,G.jsx)(Y,{className:`w-4 h-4 text-blue-400 animate-spin shrink-0`}),l===`success`&&(0,G.jsx)(xs,{className:`w-4 h-4 text-green-400 shrink-0`}),l===`error`&&(0,G.jsx)(Ds,{className:`w-4 h-4 text-red-400 shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm ${l===`info`?`text-blue-300`:l===`success`?`text-green-300`:`text-red-300`}`,children:s})]}),(0,G.jsx)(`div`,{className:`flex-1 flex flex-col gap-3 p-4 min-h-0 overflow-y-auto`,children:!D&&r?(0,G.jsx)(`div`,{className:`flex-1 flex items-center justify-center`,children:(0,G.jsx)(`div`,{className:`text-center text-white/50`,children:(0,G.jsx)(`p`,{className:`text-lg mb-2`,children:a(`spoolbuddy.ams.printerDisconnected`,`Printer disconnected`)})})}):O.length===0&&j.length===0?(0,G.jsx)(`div`,{className:`flex-1 flex items-center justify-center`,children:(0,G.jsxs)(`div`,{className:`text-center text-white/50`,children:[(0,G.jsx)(qc,{className:`w-12 h-12 mx-auto mb-3 opacity-50`}),(0,G.jsx)(`p`,{className:`text-lg mb-2`,children:a(`spoolbuddy.ams.noData`,`No AMS detected`)}),(0,G.jsx)(`p`,{className:`text-sm`,children:a(`spoolbuddy.ams.connectAms`,`Connect an AMS to see filament slots`)})]})}):(0,G.jsxs)(G.Fragment,{children:[k.length>0&&(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-3 flex-1 min-h-0`,children:k.map(e=>(0,G.jsx)(f2e,{unit:e,activeSlot:w?.ams_id===e.id?w.tray_id??null:null,onConfigureSlot:(t,n)=>ee(e.id,n),isDualNozzle:M,nozzleSide:I(e.id),thresholds:E,fillOverrides:T},e.id))}),ne.length>0&&(0,G.jsx)(`div`,{className:`flex gap-2 shrink-0`,children:ne.map(({key:e,label:t,amsId:n,trayId:r,tray:i,isEmpty:a,nozzleSide:o,effectiveFill:s})=>{let c=p2e(i.tray_color);return(0,G.jsxs)(`div`,{onClick:()=>ee(n,r),className:`bg-bambu-dark-secondary rounded-lg px-3 py-2 cursor-pointer hover:bg-bambu-dark-secondary/80 transition-all flex items-center gap-2 ${w&&w.ams_id===n&&w.tray_id===r?`ring-2 ring-bambu-green`:``} ${R?`opacity-50 pointer-events-none`:``}`,children:[(0,G.jsx)(`div`,{className:`relative w-10 h-10 shrink-0`,children:a?(0,G.jsx)(`div`,{className:`w-full h-full rounded-full border-2 border-dashed border-gray-500 flex items-center justify-center`,children:(0,G.jsx)(`div`,{className:`w-1.5 h-1.5 rounded-full bg-gray-600`})}):(0,G.jsxs)(`svg`,{viewBox:`0 0 56 56`,className:`w-full h-full`,children:[(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`26`,fill:c}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`20`,fill:c,style:{filter:`brightness(0.85)`}}),(0,G.jsx)(`ellipse`,{cx:`20`,cy:`20`,rx:`6`,ry:`4`,fill:`white`,opacity:`0.3`}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`8`,fill:`#2d2d2d`}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`5`,fill:`#1a1a1a`})]})}),(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`span`,{className:`text-xs text-white/50 font-medium`,children:t}),o&&(0,G.jsx)(G9,{side:o})]}),(0,G.jsx)(`div`,{className:`text-sm text-white/80 truncate`,children:a?`Empty`:i.tray_type||`?`})]}),!a&&s!=null&&s>=0&&(0,G.jsx)(`div`,{className:`w-1.5 h-8 bg-bambu-dark-tertiary rounded-full overflow-hidden shrink-0 flex flex-col-reverse`,children:(0,G.jsx)(`div`,{className:`w-full rounded-full`,style:{height:`${s}%`,backgroundColor:Ap(s)}})})]},e)})})]})}),(0,G.jsx)(`div`,{className:`flex justify-end gap-3 px-5 py-3 border-t border-zinc-800 shrink-0`,children:(0,G.jsx)(`button`,{onClick:t,disabled:R,className:`px-5 py-2.5 rounded-lg text-sm font-medium bg-zinc-800 text-zinc-300 hover:bg-zinc-700 transition-colors min-h-[44px] disabled:opacity-50`,children:l===`success`?a(`spoolbuddy.dashboard.close`,`Close`):a(`spoolbuddy.modal.cancel`,`Cancel`)})})]}),d&&p&&(()=>{let e=``;return p.type===`material`?e=a(`inventory.assignMismatchMessage`,{spoolMaterial:p.spoolMaterial,trayMaterial:p.trayMaterial,location:p.location}):p.type===`partial`?e=a(`inventory.assignPartialMismatchMessage`,{spoolMaterial:p.spoolMaterial,trayMaterial:p.trayMaterial,location:p.location}):p.type===`material_profile`?e=`${a(`inventory.assignMismatchMessage`,{spoolMaterial:p.spoolMaterial,trayMaterial:p.trayMaterial,location:p.location})}\n\n${a(`inventory.assignProfileMismatchMessage`,{spoolProfile:p.spoolProfile||a(`common.unknown`),trayProfile:p.trayProfile||a(`common.unknown`),location:p.location})}`:p.type===`partial_profile`&&(e=`${a(`inventory.assignPartialMismatchMessage`,{spoolMaterial:p.spoolMaterial,trayMaterial:p.trayMaterial,location:p.location})}\n\n${a(`inventory.assignProfileMismatchMessage`,{spoolProfile:p.spoolProfile||a(`common.unknown`),trayProfile:p.trayProfile||a(`common.unknown`),location:p.location})}`),e=`${e}\n\n${a(`inventory.assignReconfigureNote`)}`,(0,G.jsx)(rf,{title:a(`inventory.assignMismatchTitle`),message:e,confirmText:a(`inventory.assignMismatchConfirm`),variant:`warning`,isLoading:L.isPending,onConfirm:te,onCancel:()=>{L.isPending||(f(!1),g(null),m(null))}})})()]}):null}function _2e({isOpen:e,onClose:t,tagId:n,untaggedSpools:r,onLink:i}){let{t:a}=U(),[o,s]=(0,y.useState)(null),c=(0,y.useCallback)(()=>{s(null),t()},[t]),l=(0,y.useCallback)(e=>{e.key===`Escape`&&c()},[c]);return(0,y.useEffect)(()=>(e&&(document.addEventListener(`keydown`,l),document.body.style.overflow=`hidden`),()=>{document.removeEventListener(`keydown`,l),document.body.style.overflow=``}),[e,l]),e?(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/70 animate-fade-in`,onClick:c,children:(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-xl shadow-2xl w-full max-w-lg mx-4 animate-slide-up`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-5 py-4 border-b border-zinc-700`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h2`,{className:`text-base font-semibold text-zinc-100`,children:a(`spoolbuddy.dashboard.linkTagTitle`,`Link Tag to Spool`)}),(0,G.jsx)(`p`,{className:`text-sm text-zinc-500 font-mono`,children:n})]}),(0,G.jsx)(`button`,{onClick:c,className:`p-2 rounded-lg text-zinc-500 hover:text-zinc-300 hover:bg-zinc-700 transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`px-5 py-4 space-y-3 max-h-[400px] overflow-y-auto`,children:[(0,G.jsx)(`p`,{className:`text-sm text-zinc-400`,children:a(`spoolbuddy.dashboard.selectSpool`,`Select a spool to link this tag to:`)}),r.length===0?(0,G.jsx)(`div`,{className:`text-center py-8 text-zinc-500`,children:a(`spoolbuddy.dashboard.noUntagged`,`No spools without tags found`)}):(0,G.jsx)(`div`,{className:`space-y-2`,children:r.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>s(e),className:`w-full flex items-center gap-3 p-3 rounded-lg border-2 transition-all text-left ${o?.id===e.id?`border-green-500 bg-green-500/10`:`border-zinc-700 hover:border-green-500/50 hover:bg-zinc-700/50`}`,children:[(0,G.jsx)(W9,{color:Df(e.rgba),isEmpty:!1,size:40}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`div`,{className:`font-medium text-zinc-100 truncate`,children:Ef(e.color_name,e.rgba,e.color_name_is_synthesized)||a(`spoolbuddy.spool.unknownColor`)}),(0,G.jsxs)(`span`,{className:`text-[10px] font-mono text-zinc-500 shrink-0`,children:[`#`,e.id]})]}),(0,G.jsxs)(`div`,{className:`text-sm text-zinc-400 truncate`,children:[e.brand,` • `,e.material,e.subtype&&` ${e.subtype}`]})]}),(0,G.jsxs)(`div`,{className:`text-sm font-mono text-zinc-500`,children:[Math.max(0,e.label_weight-e.weight_used),`g`]})]},e.id))})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 px-5 py-4 border-t border-zinc-700`,children:[(0,G.jsx)(`button`,{onClick:c,className:`px-4 py-2.5 rounded-lg text-sm font-medium bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors min-h-[44px]`,children:a(`common.cancel`,`Cancel`)}),(0,G.jsx)(`button`,{onClick:()=>{o&&(i(o),s(null))},disabled:!o,className:`px-4 py-2.5 rounded-lg text-sm font-medium bg-green-600 text-white hover:bg-green-700 disabled:opacity-40 disabled:cursor-not-allowed transition-colors min-h-[44px]`,children:a(`spoolbuddy.dashboard.linkTag`,`Link Tag`)})]})]})}):null}function v2e(e){return e?e.replace(/[^0-9a-f]/gi,``).toUpperCase():``}function y2e(e,t){let n=v2e(e),r=v2e(t);return!n||!r?!1:n===r?!0:n.endsWith(r)||r.endsWith(n)}var b2e=[`#00AE42`,`#FF6B35`,`#3B82F6`,`#EF4444`,`#A855F7`,`#FBBF24`,`#14B8A6`,`#EC4899`,`#F97316`,`#22C55E`];function x2e(){let{t:e}=U(),[t,n]=(0,y.useState)(0);(0,y.useEffect)(()=>{let e=setInterval(()=>{n(e=>(e+1)%b2e.length)},5e3);return()=>clearInterval(e)},[]);let r=b2e[t];return(0,G.jsxs)(`div`,{className:`flex flex-col items-center text-center`,children:[(0,G.jsxs)(`div`,{className:`relative mb-6 flex items-center justify-center`,style:{width:160,height:160},children:[(0,G.jsx)(`div`,{className:`absolute inset-0 flex items-center justify-center pointer-events-none`,children:[0,1].map(e=>(0,G.jsx)(`div`,{className:`absolute rounded-full border spoolbuddy-optimized-ping`,style:{width:80,height:80,borderColor:`${r}4D`,transition:`border-color 140ms linear`,animationDelay:`${e*.8}s`}},e))}),(0,G.jsxs)(`div`,{className:`relative overflow-hidden rounded-full`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 rounded-full opacity-30 spoolbuddy-spool-glow`,style:{background:`radial-gradient(circle, ${r} 0%, transparent 70%)`}}),(0,G.jsx)(`div`,{className:`relative`,style:{transition:`opacity 140ms linear`},children:(0,G.jsx)(W9,{color:r,isEmpty:!1,size:100})})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xl font-medium text-zinc-300`,children:e(`spoolbuddy.dashboard.readyToScan`,`Ready to scan`)}),(0,G.jsx)(`p`,{className:`text-sm text-zinc-500`,children:e(`spoolbuddy.dashboard.idleMessage`,`Place a spool on the scale to identify it`)})]}),(0,G.jsxs)(`div`,{className:`mt-6 flex items-center gap-2 text-sm text-zinc-600`,children:[(0,G.jsx)(`svg`,{className:`w-4 h-4`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:`2`,d:`M13 16h-1v-4h-1m1-4h.01M21 12a9 9 0 11-18 0 9 9 0 0118 0z`})}),(0,G.jsx)(`span`,{children:e(`spoolbuddy.dashboard.nfcHint`,`NFC tag will be read automatically`)})]})]})}function S2e(){let{t:e}=U();return(0,G.jsxs)(`div`,{className:`flex flex-col items-center text-center`,children:[(0,G.jsx)(`div`,{className:`relative mb-6 flex items-center justify-center`,style:{width:160,height:160},children:(0,G.jsx)(`div`,{className:`w-24 h-24 rounded-full bg-zinc-800 flex items-center justify-center`,children:(0,G.jsx)(`svg`,{className:`w-12 h-12 text-zinc-600`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:`1.5`,d:`M18.364 5.636a9 9 0 010 12.728m0 0l-12.728-12.728m12.728 12.728L5.636 5.636m12.728 0a9 9 0 00-12.728 0m0 12.728a9 9 0 010-12.728`})})})}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-lg font-medium text-zinc-500`,children:e(`spoolbuddy.status.deviceOffline`,`Device Offline`)}),(0,G.jsx)(`p`,{className:`text-sm text-zinc-600`,children:e(`spoolbuddy.status.connectDisplay`,`Connect the SpoolBuddy display to scan spools`)})]}),(0,G.jsxs)(`div`,{className:`mt-6 flex items-center gap-2 text-xs text-zinc-600`,children:[(0,G.jsx)(`svg`,{className:`w-4 h-4`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:`2`,d:`M8.111 16.404a5.5 5.5 0 017.778 0M12 20h.01m-7.08-7.071c3.904-3.905 10.236-3.905 14.14 0M1.394 9.393c5.857-5.857 15.355-5.857 21.213 0`})}),(0,G.jsx)(`span`,{children:e(`spoolbuddy.status.waitingConnection`,`Waiting for device connection...`)})]})]})}function C2e(){let{sbState:e,selectedPrinterId:t}=lr(),{t:n}=U(),{showToast:r}=Gd(),{data:i}=K({queryKey:[`spoolman-settings`],queryFn:Z.getSpoolmanSettings,staleTime:300*1e3}),a=i?.spoolman_enabled===`true`&&!!i?.spoolman_url,{data:o=[],refetch:s}=K({queryKey:a?[`spoolman-inventory-spools`]:[`inventory-spools`],queryFn:()=>a?Z.getSpoolmanInventorySpools(!1):Z.getSpools(!1),enabled:i!==void 0}),{data:c=[]}=K({queryKey:[`spoolman-slot-assignments`],queryFn:()=>Z.getSpoolmanSlotAssignments(),enabled:a,staleTime:3*1e3,refetchInterval:3*1e3,refetchIntervalInBackground:!1}),{data:l=[]}=K({queryKey:[`printers`],queryFn:()=>Z.getPrinters()}),u=Co({queries:l.map(e=>({queryKey:[`printerStatus`,e.id],queryFn:()=>Z.getPrinterStatus(e.id),refetchInterval:1e4,select:e=>({connected:e?.connected,awaiting_plate_clear:e?.awaiting_plate_clear===!0})}))}),d=l.map((e,t)=>({printer:e,pending:u[t]?.data?.awaiting_plate_clear===!0})).filter(e=>e.pending),f=co(),p=q({mutationFn:e=>Z.clearPlate(e),onSuccess:(e,t)=>{f.setQueryData([`printerStatus`,t],e=>e&&{...e,awaiting_plate_clear:!1}),r(n(`spoolbuddy.dashboard.plateClearedToast`,`Plate marked as cleared`),`success`)},onError:()=>{r(n(`spoolbuddy.dashboard.plateClearFailed`,`Could not mark plate as cleared`),`error`)}}),m=q({mutationFn:e=>Z.unassignSpoolmanSlot(e),onSuccess:()=>{f.invalidateQueries({queryKey:[`spoolman-slot-assignments`]}),f.invalidateQueries({queryKey:[`spoolman-inventory-spools`]})},onError:()=>r(n(`inventory.unassignFailed`,`Failed to unassign spool`),`error`)}),[h,g]=(0,y.useState)(null),[_,v]=(0,y.useState)(null),[b,x]=(0,y.useState)(null),[S,C]=(0,y.useState)(!1),[w,T]=(0,y.useState)(!1),[E,D]=(0,y.useState)(!1),[O,k]=(0,y.useState)(!1),[A,j]=(0,y.useState)(null),M=e.matchedSpool?.tag_uid??e.unknownTagUid??null,N=e.weight,P=e.weightStable,F=(0,y.useRef)(null);N===null?F.current=null:(F.current===null||Math.abs(N-F.current)>=3||P)&&(F.current=N);let I=F.current,L=(0,y.useMemo)(()=>{if(e.matchedSpool?.id){let t=o.find(t=>t.id===e.matchedSpool?.id);if(t)return t}return h&&(o.find(e=>y2e(e.tag_uid,h))||A)||null},[h,e.matchedSpool,o,A]),R=(0,y.useMemo)(()=>{if(L&&!A)return L;let t=e.matchedSpool;return t?{id:t.id,tag_uid:t.tag_uid,material:t.material,subtype:t.subtype,color_name:t.color_name,color_name_is_synthesized:t.color_name_is_synthesized,rgba:t.rgba,brand:t.brand,label_weight:t.label_weight,core_weight:t.core_weight,weight_used:t.weight_used}:null},[L,A,e.matchedSpool]),z=a&&R!=null?c.some(e=>e.spoolman_spool_id===R.id):!1,B=(0,y.useMemo)(()=>a?o.filter(e=>!e.tag_uid&&!e.tray_uuid&&!e.archived_at):o.filter(e=>!e.tag_uid&&!e.archived_at),[o,a]);(0,y.useEffect)(()=>{if(M){let e=b===M;(h!==null&&h!==M||!e&&h!==M)&&(g(M),v(null),x(null),j(null)),!e&&N!==null&&P&&v(Math.round(Math.max(0,N)))}else b&&(g(null),x(null),v(null),j(null))},[M,N,P,h,b]);let V=()=>{x(h)},ee=async t=>{if(h)try{if(a){let i=e.unknownTagUid||void 0,a=!e.unknownTagUid&&e.unknownTrayUuid?e.unknownTrayUuid:void 0;if(!i&&!a){r(n(`spoolman.linkFailed`),`error`);return}let o=await Z.linkTagToSpoolmanSpool(t.id,{tray_uuid:a,tag_uid:i});if(!o){r(n(`spoolman.linkFailed`),`error`);return}let{id:s,material:c,subtype:l,color_name:u,color_name_is_synthesized:d,rgba:f,brand:p,label_weight:m,core_weight:h,weight_used:g}=o;j({id:s,material:c,subtype:l,color_name:u,color_name_is_synthesized:d,rgba:f,brand:p,label_weight:m,core_weight:h,weight_used:g}),r(n(`spoolman.linkSuccess`),`success`)}else await Z.linkTagToSpool(t.id,{tag_uid:h,tag_type:`generic`,data_origin:`nfc_link`});s()}catch(e){console.error(`Failed to link tag:`,e);let t=e instanceof od&&e.status===409&&e.code===`tag_already_linked`?e.detail?.spool_id:void 0;r(typeof t==`number`?n(`inventory.tagAlreadyLinked`,{id:t}):n(`spoolman.linkFailed`),`error`)}finally{C(!1)}},te=async()=>{if(h){k(!0);try{let t=ne??_;if(a){let n=await Z.createSpoolmanInventorySpool({material:`PLA`,subtype:null,color_name:null,rgba:null,extra_colors:null,effect_type:null,brand:null,label_weight:1e3,core_weight:250,core_weight_catalog_id:null,weight_used:0,slicer_filament:null,slicer_filament_name:null,nozzle_temp_min:null,nozzle_temp_max:null,note:null,added_full:null,last_used:null,encode_time:null,tag_uid:null,tray_uuid:null,data_origin:null,tag_type:null,cost_per_kg:null,last_scale_weight:t===null?null:Math.round(t),last_weighed_at:t===null?null:new Date().toISOString(),category:null,low_stock_threshold_pct:null});await Z.linkTagToSpoolmanSpool(n.id,{tag_uid:e.unknownTagUid||void 0,tray_uuid:!e.unknownTagUid&&e.unknownTrayUuid?e.unknownTrayUuid:void 0})}else await Z.createSpool({material:`PLA`,subtype:null,color_name:null,rgba:null,extra_colors:null,effect_type:null,brand:null,label_weight:1e3,core_weight:250,core_weight_catalog_id:null,weight_used:0,slicer_filament:null,slicer_filament_name:null,nozzle_temp_min:null,nozzle_temp_max:null,note:null,added_full:null,last_used:null,encode_time:null,tag_uid:h,tray_uuid:null,data_origin:`spoolbuddy`,tag_type:`generic`,cost_per_kg:null,last_scale_weight:t===null?null:Math.round(t),last_weighed_at:t===null?null:new Date().toISOString(),category:null,low_stock_threshold_pct:null})}catch(e){let t=e instanceof Error?e.message:String(e);console.error(`Failed to quick-add spool:`,t),r(t||n(`spoolbuddy.errors.quickAddFailed`,`Failed to add spool`),`error`)}finally{D(!1),k(!1),s()}}},ne=N!==null&&(M===h||M===null&&h!==null)?N:null,re=o.length,ie=new Set(o.map(e=>e.material)).size,ae=new Set(o.filter(e=>e.brand).map(e=>e.brand)).size;return(0,G.jsxs)(`div`,{className:`h-full flex flex-col p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-6 px-4 py-1.5 bg-zinc-800/50 rounded-xl border border-zinc-700/50 mb-3 shrink-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-xl font-bold text-zinc-100`,children:re}),(0,G.jsx)(`span`,{className:`text-sm text-zinc-500`,children:n(`spoolbuddy.inventory.spools`,`Spools`)})]}),(0,G.jsx)(`div`,{className:`w-px h-5 bg-zinc-700`}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-xl font-bold text-zinc-100`,children:ie}),(0,G.jsx)(`span`,{className:`text-sm text-zinc-500`,children:n(`spoolbuddy.spool.material`,`Materials`)})]}),(0,G.jsx)(`div`,{className:`w-px h-5 bg-zinc-700`}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-xl font-bold text-zinc-100`,children:ae}),(0,G.jsx)(`span`,{className:`text-sm text-zinc-500`,children:n(`spoolbuddy.spool.brand`,`Brands`)})]})]}),(0,G.jsxs)(`div`,{className:`flex-1 flex gap-4 min-h-0`,children:[(0,G.jsxs)(`div`,{className:`w-5/12 flex flex-col min-h-0`,children:[(0,G.jsxs)(`div`,{className:`border border-dashed border-zinc-700/50 rounded-xl p-4`,children:[(0,G.jsx)(`h2`,{className:`text-sm font-semibold text-zinc-400 uppercase tracking-wide mb-3`,children:n(`spoolbuddy.dashboard.device`,`Device`)}),(0,G.jsxs)(`div`,{className:`space-y-2.5`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-2.5 h-2.5 rounded-full ${e.deviceOnline?`bg-green-500`:`bg-red-500`}`}),(0,G.jsx)(`span`,{className:`text-base text-zinc-400`,children:e.deviceOnline?n(`spoolbuddy.status.online`,`Online`):n(`spoolbuddy.status.offline`,`Disconnected`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-3 bg-zinc-800/50 rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`svg`,{className:`w-4 h-4 ${e.deviceOnline?`text-green-500`:`text-zinc-500`}`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:`2`,d:`M3 6l3 1m0 0l-3 9a5.002 5.002 0 006.001 0M6 7l3 9M6 7l6-2m6 2l3-1m-3 1l-3 9a5.002 5.002 0 006.001 0M18 7l3 9m-3-9l-6-2m0-2v2m0 16V5m0 16H9m3 0h3`})}),(0,G.jsx)(`span`,{className:`text-sm text-zinc-500`,children:n(`spoolbuddy.spool.scaleWeight`,`Scale`)})]}),(0,G.jsx)(`span`,{className:`text-lg font-mono font-semibold text-zinc-100`,children:I===null?`—`:`${Math.abs(I)<=20?0:Math.round(Math.max(0,I))}g`})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-3 bg-zinc-800/50 rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`svg`,{className:`w-4 h-4 ${e.deviceOnline?`text-green-500`:`text-zinc-500`}`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:`2`,d:`M7 7h.01M7 3h5c.512 0 1.024.195 1.414.586l7 7a2 2 0 010 2.828l-7 7a2 2 0 01-2.828 0l-7-7A2 2 0 013 12V7a4 4 0 014-4z`})}),(0,G.jsx)(`span`,{className:`text-sm text-zinc-500`,children:`NFC`})]}),(0,G.jsx)(`span`,{className:`text-sm font-medium ${M?`text-green-500`:`text-zinc-500`}`,children:M?n(`spoolbuddy.dashboard.tagDetected`,`Tag detected`):n(`spoolbuddy.dashboard.noTag`,`No tag`)})]})]})]}),l.length>0&&(0,G.jsxs)(`div`,{className:`mt-3 border border-dashed border-zinc-700/50 rounded-xl p-4`,children:[(0,G.jsx)(`h2`,{className:`text-sm font-semibold text-zinc-400 uppercase tracking-wide mb-2.5`,children:n(`spoolbuddy.dashboard.printers`,`Printers`)}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-2 overflow-hidden`,children:l.map((e,t)=>{let n=u[t]?.data?.connected??!1;return(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 px-2.5 py-1 bg-zinc-800/50 rounded-lg`,title:`${e.name} — ${n?`Online`:`Offline`}`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full shrink-0 ${n?`bg-green-500`:`bg-zinc-600`}`}),(0,G.jsx)(`span`,{className:`text-xs text-zinc-400 truncate max-w-[100px]`,children:e.name})]},e.id)})}),d.length>0&&(0,G.jsx)(`div`,{className:`mt-2 flex flex-wrap gap-2`,"data-testid":`plate-clear-section`,"aria-label":n(`spoolbuddy.dashboard.plateReadyLabel`,`Plates ready to clear`),children:d.map(({printer:e})=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>p.mutate(e.id),disabled:p.isPending,"data-testid":`plate-clear-button-${e.id}`,title:n(`spoolbuddy.dashboard.plateReady`,`Plate ready: {{name}}`,{name:e.name}),className:`flex items-center gap-1.5 px-2.5 py-1 rounded-lg bg-amber-500/10 hover:bg-amber-500/20 active:bg-amber-500/30 border border-amber-500/30 text-amber-200 transition-colors disabled:opacity-60 disabled:cursor-wait`,children:[(0,G.jsxs)(`svg`,{className:`w-3 h-3 shrink-0`,viewBox:`0 0 24 24`,fill:`none`,stroke:`currentColor`,strokeWidth:`2.5`,strokeLinecap:`round`,strokeLinejoin:`round`,"aria-hidden":`true`,children:[(0,G.jsx)(`path`,{d:`M12 9v4`}),(0,G.jsx)(`path`,{d:`M12 17h.01`}),(0,G.jsx)(`path`,{d:`M10.29 3.86 1.82 18a2 2 0 0 0 1.71 3h16.94a2 2 0 0 0 1.71-3L13.71 3.86a2 2 0 0 0-3.42 0z`})]}),(0,G.jsx)(`span`,{className:`text-xs truncate max-w-[100px]`,children:e.name}),(0,G.jsx)(`span`,{className:`text-xs opacity-70`,"aria-hidden":`true`,children:`·`}),(0,G.jsx)(`span`,{className:`text-xs font-medium`,children:n(`spoolbuddy.dashboard.plateClearAction`,`Clear`)})]},e.id))})]})]}),(0,G.jsx)(`div`,{className:`w-7/12 min-h-0`,children:(0,G.jsxs)(`div`,{className:`border border-dashed border-zinc-700/50 rounded-xl p-6 h-full flex flex-col`,children:[(0,G.jsx)(`h2`,{className:`text-sm font-semibold text-zinc-400 uppercase tracking-wide mb-4 shrink-0`,children:n(`spoolbuddy.dashboard.currentSpool`,`Current Spool`)}),(0,G.jsx)(`div`,{className:`flex-1 flex items-center justify-center min-h-0`,children:e.deviceOnline?(L||e.matchedSpool)&&h&&b!==h?(0,G.jsx)(Z0e,{spool:(()=>{let t=L??e.matchedSpool;return{id:t.id,tag_uid:h,material:t.material,subtype:t.subtype,color_name:t.color_name,color_name_is_synthesized:t.color_name_is_synthesized,rgba:t.rgba,brand:t.brand,label_weight:t.label_weight,core_weight:t.core_weight,weight_used:t.weight_used}})(),scaleWeight:ne??_,onSyncWeight:()=>s(),onAssignToAms:()=>T(!0),isAssigned:z,onUnassignFromAms:z&&L?.id!=null?()=>m.mutate(L.id):void 0,onClose:V}):M&&h&&!L&&!e.matchedSpool&&b!==h?(0,G.jsx)(Q0e,{tagUid:h,scaleWeight:ne??_,onLinkSpool:B.length>0?()=>C(!0):void 0,onAddToInventory:()=>D(!0),onClose:V}):(0,G.jsx)(x2e,{}):(0,G.jsx)(S2e,{})})]})})]}),R&&!A&&h&&(0,G.jsx)(g2e,{isOpen:w,onClose:()=>T(!1),spool:R,printerId:t,spoolmanMode:a}),h&&(0,G.jsx)(_2e,{isOpen:S,onClose:()=>C(!1),tagId:h,untaggedSpools:B,onLink:ee}),E&&h&&(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/60`,children:(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-2xl p-6 mx-4 max-w-sm w-full border border-zinc-700`,children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-zinc-100 mb-3`,children:n(`spoolbuddy.modal.addToInventory`,`Add to Inventory`)}),(0,G.jsxs)(`div`,{className:`flex gap-2.5 p-3 bg-amber-500/10 border border-amber-500/20 rounded-lg mb-4`,children:[(0,G.jsx)(`svg`,{className:`w-5 h-5 text-amber-500 shrink-0 mt-0.5`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:`2`,d:`M13 16h-1v-4h-1m1-4h.01M21 12a9 9 0 11-18 0 9 9 0 0118 0z`})}),(0,G.jsx)(`p`,{className:`text-sm text-amber-200/80`,children:n(`spoolbuddy.modal.quickAddHint`,`For best results, add the spool in the Bambuddy web interface first (with material, color, brand), then use "Assign Spool" here to assign the NFC tag.`)})]}),(0,G.jsx)(`p`,{className:`text-sm text-zinc-400 mb-1`,children:n(`spoolbuddy.modal.quickAddDesc`,`This will create a basic PLA spool entry with this NFC tag. You can edit the details later in Bambuddy.`)}),(0,G.jsx)(`p`,{className:`text-xs text-zinc-500 font-mono mb-5`,children:h}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(`button`,{onClick:()=>D(!1),className:`flex-1 px-4 py-2.5 rounded-lg text-sm font-medium bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors min-h-[44px]`,children:n(`common.cancel`,`Cancel`)}),(0,G.jsx)(`button`,{onClick:te,disabled:O,className:`flex-1 px-4 py-2.5 rounded-lg text-sm font-medium bg-green-600 text-white hover:bg-green-700 disabled:opacity-50 transition-colors min-h-[44px]`,children:O?n(`common.saving`,`Saving...`):n(`spoolbuddy.modal.addAnyway`,`Add Anyway`)})]})]})})]})}function w2e(e){let t=Ef(e.color_name,e.rgba,e.color_name_is_synthesized);return t?` - ${t}`:``}function T2e(e){return e<=3?`AMS ${String.fromCharCode(65+e)}`:e>=128&&e<=135?`AMS HT ${String.fromCharCode(65+e-128)}`:`AMS ${e}`}function E2e(e){return e?{O1D:`H2D`,O1E:`H2D Pro`,O2D:`H2D Pro`,O1C:`H2C`,O1C2:`H2C`,O1S:`H2S`,"BL-P001":`X1C`,"BL-P002":`X1`,"BL-P003":`X1E`,N6:`X2D`,N9:`A2L`,C11:`P1S`,C12:`P1P`,C13:`P2S`,N2S:`A1`,N1:`A1 Mini`,X1C:`X1C`,X1:`X1`,X1E:`X1E`,X2D:`X2D`,P1S:`P1S`,P1P:`P1P`,P2S:`P2S`,A1:`A1`,"A1 Mini":`A1 Mini`,A2L:`A2L`,H2D:`H2D`,"H2D Pro":`H2D Pro`,H2C:`H2C`,H2S:`H2S`}[e]||e:``}function Y9(e){return!e.tray_type||e.tray_type===``}function D2e(e){return e?`#${e.slice(0,6)}`:`#808080`}function O2e(){let{selectedPrinterId:e,setAlert:t}=lr(),{t:n}=U(),r=co(),{showToast:i}=Gd(),{data:a}=K({queryKey:[`printerStatus`,e],queryFn:()=>Z.getPrinterStatus(e),enabled:e!==null,staleTime:30*1e3}),{data:o}=K({queryKey:[`printer`,e],queryFn:()=>Z.getPrinter(e),enabled:e!==null,staleTime:60*1e3}),{data:s}=K({queryKey:[`slotPresets`,e],queryFn:()=>Z.getSlotPresets(e),enabled:e!==null,staleTime:120*1e3}),{data:c}=K({queryKey:[`settings`],queryFn:()=>Z.getSettings(),staleTime:300*1e3}),{data:l}=K({queryKey:[`spoolman-status`],queryFn:Z.getSpoolmanStatus,staleTime:60*1e3}),u=l?.enabled&&l?.connected,{data:d}=K({queryKey:[`linked-spools`],queryFn:Z.getLinkedSpools,enabled:!!u,staleTime:30*1e3}),f=d?.linked,{data:p=[]}=K({queryKey:[`spoolman-slot-assignments-all`],queryFn:()=>Z.getSpoolmanSlotAssignments(),enabled:!!u,staleTime:30*1e3}),{data:m=[]}=K({queryKey:[`spoolman-inventory-spools`],queryFn:()=>Z.getSpoolmanInventorySpools(!1),enabled:!!u,staleTime:30*1e3}),{data:h}=K({queryKey:[`spool-assignments`,e],queryFn:()=>Z.getAssignments(e),enabled:e!==null,staleTime:30*1e3}),g=(0,y.useMemo)(()=>{let e={};if(!h)return e;for(let t of h){let n=t.spool;if(n&&n.label_weight>0&&n.weight_used!=null){let r=Math.round(Math.max(0,n.label_weight-n.weight_used)/n.label_weight*100);e[`${t.ams_id}-${t.tray_id}`]=r}}return e},[h]),_=o?.serial_number??``,v=(0,y.useCallback)((t,n,r)=>{if(e!==null&&p.length&&m.length){let r=p.find(r=>r.printer_id===e&&r.ams_id===t&&r.tray_id===n);if(r){let e=m.find(e=>e.id===r.spoolman_spool_id);if(e&&(e.label_weight??0)>0)return Math.round(Math.max(0,e.label_weight-e.weight_used)/e.label_weight*100)}}if(f&&_){let e=(r?.tray_uuid||r?.tag_uid||Pp(_,t,n))?.toUpperCase(),i=jp(e?f[e]:void 0);if(i!==null)return i}return null},[f,_,e,p,m]),b=a?.connected??!1,x=(0,y.useRef)({});(0,y.useEffect)(()=>{e&&a?.ams&&a.ams.length>0&&(x.current[e]=a.ams)},[a?.ams,e]);let S=(0,y.useMemo)(()=>{let t=a?.ams;return t&&t.length>0?t:(e?x.current[e]:null)??[]},[a?.ams,e]),C=(0,y.useMemo)(()=>S.filter(e=>!e.is_ams_ht),[S]),w=(0,y.useMemo)(()=>S.filter(e=>e.is_ams_ht),[S]),T=(0,y.useMemo)(()=>{let e={};if(!f||!_)return e;for(let t of C)for(let n=0;n<(t.tray?.length??0);n++){let r=t.tray[n],i=v(t.id,n,Y9(r)?null:r);i!==null&&(e[`${t.id}-${n}`]=i)}return e},[f,_,C,v]),E=(0,y.useRef)(void 0),D=a?.tray_now;D!==void 0&&D!==255?E.current=D:D===255&&(E.current=void 0);let O=D!==void 0&&D!==255?D:E.current,k=o?.nozzle_count===2||a?.temperatures?.nozzle_2!==void 0,A=(0,y.useMemo)(()=>[...a?.vt_tray??[]].sort((e,t)=>(e.id??254)-(t.id??254)),[a?.vt_tray]),j=c?{humidityGood:Number(c.ams_humidity_good)||40,humidityFair:Number(c.ams_humidity_fair)||60,tempGood:Number(c.ams_temp_good)||28,tempFair:Number(c.ams_temp_fair)||35}:void 0,M=(0,y.useRef)({});(0,y.useEffect)(()=>{a?.ams_extruder_map&&Object.keys(a.ams_extruder_map).length>0&&(M.current=a.ams_extruder_map)},[a?.ams_extruder_map]);let N=a?.ams_extruder_map&&Object.keys(a.ams_extruder_map).length>0?a.ams_extruder_map:M.current,P=(0,y.useCallback)(e=>{if(!k)return null;let t=N[String(e)],n=e>=128?e-128:e;return(t===void 0?n:t)===1?`L`:`R`},[k,N]),[F,I]=(0,y.useState)(null),[L,R]=(0,y.useState)(null),[z,B]=(0,y.useState)(null),[V,ee]=(0,y.useState)(null),te=(0,y.useCallback)((e,t)=>h?.find(n=>n.ams_id===Number(e)&&n.tray_id===Number(t)),[h]),ne=(0,y.useCallback)((e,t,n)=>{if(!f||!_)return;let r=(n?.tray_uuid||n?.tag_uid||Pp(_,e,t))?.toUpperCase();return r?f[r]:void 0},[f,_]),re=q({mutationFn:({printerId:e,amsId:t,trayId:n})=>Z.unassignSpool(e,t,n),onSuccess:()=>{r.invalidateQueries({queryKey:[`spool-assignments`,e]}),r.invalidateQueries({queryKey:[`spool-assignments`]}),i(n(`inventory.unassignSuccess`,`Spool unassigned`),`success`),R(null)}}),ie=q({mutationFn:e=>Z.unlinkSpool(e),onSuccess:e=>{i(n(`spoolman.unlinkSuccess`)||e?.message,`success`),r.invalidateQueries({queryKey:[`linked-spools`]}),r.invalidateQueries({queryKey:[`unlinked-spools`]}),r.invalidateQueries({queryKey:[`spoolman-slot-assignments`]}),r.invalidateQueries({queryKey:[`spoolman-slot-assignments-all`]}),r.invalidateQueries({queryKey:[`spoolman-inventory-spools`]}),R(null)},onError:e=>{i(e.message||n(`spoolman.unlinkFailed`),`error`)}}),ae=q({mutationFn:e=>Z.unassignSpoolmanSlot(e),onSuccess:()=>{i(n(`inventory.unassignSuccess`,`Spool unassigned`),`success`),r.invalidateQueries({queryKey:[`spoolman-slot-assignments`]}),r.invalidateQueries({queryKey:[`spoolman-slot-assignments-all`]}),r.invalidateQueries({queryKey:[`spoolman-inventory-spools`]}),r.invalidateQueries({queryKey:[`unlinked-spools`]}),r.invalidateQueries({queryKey:[`linked-spools`]}),R(null)},onError:e=>{i(e.message||n(`inventory.assignFailed`,`Failed to unassign spool`),`error`)}}),oe=(0,y.useCallback)(e=>O===void 0?null:e<=3&&Math.floor(O/4)===e?O%4:e>=128&&e<=135&&O===kp(e,0,!1)?0:null,[O]),se=(0,y.useCallback)((e,t,n)=>{let r=kp(e,t,!1),i=s?.[r],a=N[String(e)],o=e>=128?e-128:e,c=a===void 0?o:a;R({amsId:e,trayId:t,trayCount:n&&e>=128?1:4,tray:n,trayType:n?.tray_type||void 0,trayColor:n?.tray_color||void 0,traySubBrands:n?.tray_sub_brands||void 0,trayInfoIdx:n?.tray_info_idx||void 0,extruderId:k?c:void 0,caliIdx:n?.cali_idx,savedPresetId:i?.preset_id,location:`${T2e(e)} Slot ${t+1}`})},[s,N,k]),H=(0,y.useCallback)(e=>{let t=e.id??254,n=t-254,r=s?.[1020+n];R({amsId:255,trayId:n,trayCount:1,tray:Y9(e)?null:e,trayType:e.tray_type||void 0,trayColor:e.tray_color||void 0,traySubBrands:e.tray_sub_brands||void 0,trayInfoIdx:e.tray_info_idx||void 0,extruderId:k?+(t===254):void 0,caliIdx:e.cali_idx,savedPresetId:r?.preset_id,location:k?t===254?`Ext-L`:`Ext-R`:`External`})},[s,k]),ce=(0,y.useCallback)(()=>{if(!L)return;let{tray:e,location:t,...n}=L;R(null),I(n)},[L]),le=(0,y.useCallback)(()=>{if(!L||!e)return;let{amsId:t,trayId:n,trayType:r,trayColor:i,location:a}=L;R(null),B({printerId:e,amsId:t,trayId:n,trayInfo:{type:r||``,material:r,color:i?.slice(0,6)||``,location:a}})},[L,e]),ue=(0,y.useCallback)(()=>{if(!L||!e)return;let{amsId:t,trayId:n,tray:r}=L,i=(r?.tray_uuid||r?.tag_uid||Pp(_,t,n))?.toUpperCase()||``;R(null),ee({tagUid:r?.tag_uid||i,trayUuid:r?.tray_uuid||``,printerId:e,amsId:t,trayId:n})},[L,e,_]),de=(0,y.useCallback)(()=>{if(!L||!e)return;let{amsId:t,trayId:n}=L;re.mutate({printerId:e,amsId:t,trayId:n})},[L,e,re]);(0,y.useEffect)(()=>{if(!b&&e){t({type:`warning`,message:n(`spoolbuddy.ams.printerDisconnected`,`Printer disconnected`)});return}for(let e of S){let n=e.tray||[];for(let r=0;r<n.length;r++){let i=n[r];if(i.remain!==null&&i.remain>=0&&i.remain<15&&i.tray_type){let n=e.id===254||e.id===255,a=!n&&e.id>=128,o=Op(e.id,r,a,n);t({type:`warning`,message:`Low Filament: ${i.tray_type} (${o}) - ${i.remain}% remaining`});return}}}t(null)},[S,b,e,t,n]);let fe=(0,y.useMemo)(()=>{let e=[];for(let t of w){let n=t.tray?.[0]||{id:0,tray_color:null,tray_type:``,tray_sub_brands:null,tray_id_name:null,tray_info_idx:null,remain:-1,k:null,cali_idx:null,tag_uid:null,tray_uuid:null,nozzle_temp_min:null,nozzle_temp_max:null},r=v(t.id,0,Y9(n)?null:n),i=g[`${t.id}-0`]??null,a=n.remain!=null&&n.remain>=0?n.remain:null,o=i===0&&a!==null&&a>0?null:i;e.push({key:`ht-${t.id}`,label:T2e(t.id),tray:n,isEmpty:Y9(n),isActive:oe(t.id)===0,temp:t.temp,humidity:t.humidity,nozzleSide:P(t.id),effectiveFill:r??o??a,onClick:()=>se(t.id,0,Y9(n)?null:n)})}for(let t of A){let r=t.id??254,i=k&&O===254?r===254&&a?.active_extruder===1||r===255&&a?.active_extruder===0:O===r,o=r-254,s=v(255,o,Y9(t)?null:t),c=g[`255-${o}`]??null,l=t.remain!=null&&t.remain>=0?t.remain:null,u=c===0&&l!==null&&l>0?null:c;e.push({key:`ext-${r}`,label:k?r===254?n(`printers.extL`,`Ext-L`):n(`printers.extR`,`Ext-R`):n(`printers.ext`,`Ext`),tray:t,isEmpty:Y9(t),isActive:i,nozzleSide:null,effectiveFill:s??u??l,onClick:()=>H(t)})}return e},[w,A,k,O,a?.active_extruder,n,oe,P,se,H,g,v]);return(0,G.jsxs)(`div`,{className:`h-full flex flex-col p-4`,children:[(0,G.jsx)(`div`,{className:`flex-1 min-h-0`,children:e?b?S.length===0&&A.length===0?(0,G.jsx)(`div`,{className:`flex-1 flex items-center justify-center h-full`,children:(0,G.jsxs)(`div`,{className:`text-center text-white/50`,children:[(0,G.jsx)(qc,{className:`w-12 h-12 mx-auto mb-3 opacity-50`}),(0,G.jsx)(`p`,{className:`text-lg mb-2`,children:n(`spoolbuddy.ams.noData`,`No AMS detected`)}),(0,G.jsx)(`p`,{className:`text-sm`,children:n(`spoolbuddy.ams.connectAms`,`Connect an AMS to see filament slots`)})]})}):(0,G.jsxs)(`div`,{className:`flex flex-col gap-3 h-full`,children:[(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-3`,children:C.map(e=>(0,G.jsx)(f2e,{unit:e,activeSlot:oe(e.id),onConfigureSlot:se,isDualNozzle:k,nozzleSide:P(e.id),thresholds:j,fillOverrides:g,spoolmanFillOverrides:T},e.id))}),fe.length>0&&(0,G.jsx)(`div`,{className:`grid grid-cols-2 md:grid-cols-4 gap-3`,children:fe.map(({key:e,label:t,tray:n,isEmpty:r,isActive:i,temp:a,humidity:o,nozzleSide:s,effectiveFill:c,onClick:l})=>{let u=D2e(n.tray_color);return(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg px-3 py-2 cursor-pointer hover:bg-bambu-dark-secondary/80 transition-all flex items-center gap-3 ${i?`ring-2 ring-bambu-green`:``}`,onClick:l,children:[(0,G.jsxs)(`div`,{className:`relative w-10 h-10 flex-shrink-0`,children:[r?(0,G.jsx)(`div`,{className:`w-full h-full rounded-full border-2 border-dashed border-gray-500 flex items-center justify-center`,children:(0,G.jsx)(`div`,{className:`w-1.5 h-1.5 rounded-full bg-gray-600`})}):(0,G.jsxs)(`svg`,{viewBox:`0 0 56 56`,className:`w-full h-full`,children:[(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`26`,fill:u}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`20`,fill:u,style:{filter:`brightness(0.85)`}}),(0,G.jsx)(`ellipse`,{cx:`20`,cy:`20`,rx:`6`,ry:`4`,fill:`white`,opacity:`0.3`}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`8`,fill:`#2d2d2d`}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`5`,fill:`#1a1a1a`})]}),i&&(0,G.jsx)(`div`,{className:`absolute -bottom-0.5 left-1/2 -translate-x-1/2 w-1.5 h-1.5 bg-bambu-green rounded-full`})]}),(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`span`,{className:`text-xs text-white/50 font-medium truncate`,children:t}),s&&(0,G.jsx)(G9,{side:s})]}),(0,G.jsx)(`div`,{className:`text-sm text-white/80 truncate`,children:r?`Empty`:n.tray_type||`?`}),(a!=null||o!=null)&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[a!=null&&(0,G.jsx)(u2e,{temp:a,goodThreshold:j?.tempGood,fairThreshold:j?.tempFair}),o!=null&&(0,G.jsx)(l2e,{humidity:o,goodThreshold:j?.humidityGood,fairThreshold:j?.humidityFair})]})]}),!r&&c!=null&&c>=0&&(0,G.jsx)(`div`,{className:`w-1.5 h-8 bg-bambu-dark-tertiary rounded-full overflow-hidden flex-shrink-0 flex flex-col-reverse`,children:(0,G.jsx)(`div`,{className:`w-full rounded-full`,style:{height:`${c}%`,backgroundColor:Ap(c)}})})]},e)})})]}):(0,G.jsx)(`div`,{className:`flex-1 flex items-center justify-center h-full`,children:(0,G.jsx)(`div`,{className:`text-center text-white/50`,children:(0,G.jsx)(`p`,{className:`text-lg mb-2`,children:n(`spoolbuddy.ams.printerDisconnected`,`Printer disconnected`)})})}):(0,G.jsx)(`div`,{className:`flex-1 flex items-center justify-center h-full`,children:(0,G.jsxs)(`div`,{className:`text-center text-white/50`,children:[(0,G.jsx)(`p`,{className:`text-lg mb-2`,children:n(`spoolbuddy.ams.noPrinter`,`No printer selected`)}),(0,G.jsx)(`p`,{className:`text-sm`,children:n(`spoolbuddy.ams.selectPrinter`,`Select a printer from the top bar`)})]})})}),F&&e&&(0,G.jsx)(_W,{isOpen:!!F,onClose:()=>I(null),printerId:e,slotInfo:F,printerModel:E2e(o?.model??null)||void 0,nozzleDiameter:aee(a,F.amsId),fullScreen:!0,onSuccess:()=>{r.invalidateQueries({queryKey:[`slotPresets`,e]}),r.invalidateQueries({queryKey:[`printerStatus`,e]})}}),L&&e&&(()=>{let t=te(L.amsId,L.trayId),r=ne(L.amsId,L.trayId,L.tray),i=u?p.find(t=>t.printer_id===e&&t.ams_id===L.amsId&&t.tray_id===L.trayId):void 0,a=i?m.find(e=>e.id===i.spoolman_spool_id)??null:null;return(0,G.jsxs)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60 backdrop-blur-sm`,onClick:()=>R(null)}),(0,G.jsxs)(`div`,{className:`relative w-full max-w-sm mx-4 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-2xl`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[L.trayColor&&(0,G.jsx)(`span`,{className:`w-4 h-4 rounded-full border border-black/20`,style:{backgroundColor:`#${L.trayColor.slice(0,6)}`}}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:L.location}),L.traySubBrands&&(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[`(`,L.traySubBrands,`)`]})]}),(0,G.jsx)(`button`,{onClick:()=>R(null),className:`p-1 text-bambu-gray hover:text-white rounded transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-2`,children:[!u&&t?.spool&&(0,G.jsxs)(`div`,{className:`p-2.5 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary mb-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-1`,children:n(`inventory.assignedSpool`,`Assigned spool`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[t.spool.rgba&&(0,G.jsx)(`span`,{className:`w-3 h-3 rounded-full border border-black/20 flex-shrink-0`,style:kf(t.spool.rgba)}),(0,G.jsxs)(`span`,{className:`text-sm text-white`,children:[t.spool.brand?`${t.spool.brand} `:``,t.spool.material,t.spool.subtype?` ${t.spool.subtype}`:``,w2e(t.spool)]}),(0,G.jsxs)(`span`,{className:`text-[10px] font-mono text-zinc-500 shrink-0 ml-auto`,children:[`#`,t.spool.id]})]})]}),u&&r&&!a&&(0,G.jsxs)(`div`,{className:`p-2.5 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary mb-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-1`,children:n(`spoolman.linkedSpool`,`Linked spool`)}),(0,G.jsx)(`div`,{className:`flex items-center gap-2`,children:(0,G.jsxs)(`span`,{className:`text-sm text-white`,children:[`Spoolman #`,r.id,r.remaining_weight==null?``:` (${Math.round(r.remaining_weight)}g)`]})})]}),u&&a&&(0,G.jsxs)(`div`,{className:`p-2.5 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary mb-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-1`,children:n(`inventory.assignedSpool`,`Assigned spool`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[a.rgba&&(0,G.jsx)(`span`,{className:`w-3 h-3 rounded-full border border-black/20 flex-shrink-0`,style:kf(a.rgba)}),(0,G.jsxs)(`span`,{className:`text-sm text-white`,children:[a.brand?`${a.brand} `:``,a.material,a.subtype?` ${a.subtype}`:``,w2e(a)]})]})]}),(0,G.jsxs)(`button`,{onClick:ce,className:`w-full flex items-center gap-3 p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary hover:border-bambu-blue transition-colors text-left`,children:[(0,G.jsx)(tu,{className:`w-5 h-5 text-bambu-blue flex-shrink-0`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:n(`configureAmsSlot.title`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`spoolbuddy.ams.configureDesc`,`Set filament preset, K-profile, and color`)})]})]}),!u&&(Vp(L?.tray)?null:t?(0,G.jsxs)(`button`,{onClick:de,disabled:re.isPending,className:`w-full flex items-center gap-3 p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary hover:border-amber-500 transition-colors text-left`,children:[(0,G.jsx)(zu,{className:`w-5 h-5 text-amber-400 flex-shrink-0`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-amber-400 font-medium`,children:n(`inventory.unassignSpool`,`Unassign`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`spoolbuddy.ams.unassignDesc`,`Remove inventory spool from this slot`)})]})]}):(0,G.jsxs)(`button`,{onClick:le,className:`w-full flex items-center gap-3 p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary hover:border-bambu-green transition-colors text-left`,children:[(0,G.jsx)(Sl,{className:`w-5 h-5 text-bambu-green flex-shrink-0`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:n(`inventory.assignSpool`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`spoolbuddy.ams.assignDesc`,`Track a spool from your inventory`)})]})]})),u&&(r?.id?(0,G.jsxs)(`button`,{onClick:()=>ie.mutate(r.id),disabled:ie.isPending,className:`w-full flex items-center gap-3 p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary hover:border-amber-500 transition-colors text-left active:opacity-50`,children:[(0,G.jsx)(zu,{className:`w-5 h-5 text-amber-400 flex-shrink-0`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-amber-400 font-medium`,children:n(`inventory.unassignSpool`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`spoolbuddy.ams.unlinkDesc`,`Remove Spoolman link from this slot`)})]})]}):a?(0,G.jsxs)(`button`,{onClick:()=>ae.mutate(a.id),disabled:ae.isPending,className:`w-full flex items-center gap-3 p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary hover:border-amber-500 transition-colors text-left active:opacity-50`,children:[(0,G.jsx)(zu,{className:`w-5 h-5 text-amber-400 flex-shrink-0`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-amber-400 font-medium`,children:n(`inventory.unassignSpool`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`spoolbuddy.ams.unassignDesc`,`Remove inventory spool from this slot`)})]})]}):(0,G.jsxs)(`button`,{onClick:ue,className:`w-full flex items-center gap-3 p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary hover:border-bambu-green transition-colors text-left`,children:[(0,G.jsx)(Yc,{className:`w-5 h-5 text-bambu-green flex-shrink-0`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:n(`inventory.assignSpool`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`spoolbuddy.ams.linkDesc`,`Link a Spoolman spool to this slot`)})]})]}))]})]})]})})(),z&&(0,G.jsx)(OU,{isOpen:!!z,onClose:()=>{B(null),r.invalidateQueries({queryKey:[`spool-assignments`,e]}),r.invalidateQueries({queryKey:[`spool-assignments`]})},printerId:z.printerId,amsId:z.amsId,trayId:z.trayId,trayInfo:z.trayInfo,spoolmanEnabled:!!u}),V&&(0,G.jsx)(EU,{isOpen:!!V,onClose:()=>ee(null),tagUid:V.tagUid,trayUuid:V.trayUuid,printerId:V.printerId,amsId:V.amsId,trayId:V.trayId})]})}function k2e({type:e,deviceId:t,onClose:n}){let{t:r}=U(),[i,a]=(0,y.useState)(!1),[o,s]=(0,y.useState)(``),[c,l]=(0,y.useState)(``),[u,d]=(0,y.useState)(!1);(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&!i&&n()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[i,n]);let f=(0,y.useCallback)(async()=>{a(!0),s(``),l(``),d(!0);try{s(r(`spoolbuddy.diagnostic.queuing`,`Queuing diagnostic on device...
-`)),await Dd.queueDiagnostics(t,e);let n=null,i=0;for(;i<60&&!n;){await new Promise(e=>setTimeout(e,500));try{n=await Dd.getDiagnosticResult(t,e);break}catch{i++,i%4==0&&s(e=>e+`.`)}}if(!n)throw Error(`Diagnostic timed out - device did not report results`);s(n.output),n.success||l(`Exit code: ${n.exit_code}`)}catch(e){l(e instanceof Error?e.message:`Unknown error`),s(``)}finally{a(!1)}},[e,t,r]);return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/70 animate-fade-in`,onClick:n,children:(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg shadow-xl w-full max-w-2xl mx-4 max-h-[80vh] flex flex-col animate-slide-up`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex justify-between items-center p-4 border-b border-zinc-700`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e===`scale`?r(`spoolbuddy.diagnostic.scaleTitle`,`Scale Diagnostic`):e===`read_tag`?r(`spoolbuddy.diagnostic.readTagTitle`,`Read Tag Diagnostic`):r(`spoolbuddy.diagnostic.nfcTitle`,`NFC Reader Diagnostic`)}),(0,G.jsx)(`button`,{onClick:n,className:`text-zinc-400 hover:text-white transition-colors`,"aria-label":`Close`,children:(0,G.jsx)(td,{size:20})})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-auto p-4 bg-black/50 font-mono text-sm`,children:i?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-green-400`,children:[(0,G.jsx)(`div`,{className:`animate-spin w-4 h-4 border-2 border-green-400 border-t-transparent rounded-full`}),(0,G.jsx)(`span`,{children:r(`spoolbuddy.diagnostic.running`,`Running diagnostic on device...`)})]}):o?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`text-green-400 whitespace-pre-wrap break-words`,children:o}),c&&(0,G.jsxs)(`div`,{className:`text-red-400 mt-2`,children:[`❌ `,c]})]}):u?(0,G.jsx)(`div`,{children:c?(0,G.jsxs)(`div`,{className:`text-red-400`,children:[`ERROR: `,c]}):(0,G.jsx)(`span`,{className:`text-green-400`,children:r(`spoolbuddy.diagnostic.completed`,`Diagnostic completed successfully.`)})}):(0,G.jsxs)(`div`,{className:`text-zinc-500`,children:[r(`spoolbuddy.diagnostic.clickStart`,`Click "Run Diagnostic" to start the hardware diagnostic on`),` `,t,`.`]})}),(0,G.jsxs)(`div`,{className:`flex gap-2 p-4 border-t border-zinc-700 bg-zinc-800`,children:[(0,G.jsx)(`button`,{onClick:f,disabled:i,className:`flex-1 flex items-center justify-center gap-2 bg-green-600 hover:bg-green-700 disabled:bg-gray-600 disabled:cursor-not-allowed px-4 py-2 rounded font-semibold text-white transition-colors`,children:i?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`animate-spin w-4 h-4 border-2 border-white border-t-transparent rounded-full`}),r(`spoolbuddy.diagnostic.runningBtn`,`Running...`)]}):u?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Wl,{size:16}),r(`spoolbuddy.diagnostic.runAgain`,`Run Again`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ml,{size:16}),r(`spoolbuddy.diagnostic.runBtn`,`Run Diagnostic`)]})}),(0,G.jsx)(`button`,{onClick:n,className:`px-4 py-2 rounded bg-zinc-700 hover:bg-zinc-600 text-white font-semibold transition-colors`,children:r(`spoolbuddy.diagnostic.close`,`Close`)})]})]})})}function A2e(e){return e<60?`${e}s`:e<3600?`${Math.floor(e/60)}m`:`${Math.floor(e/3600)}h ${Math.floor(e%3600/60)}m`}function j2e(e){if(!e)return`-`;let t=ep(e);return t?t.toLocaleDateString(void 0,{month:`short`,day:`numeric`})+` `+t.toLocaleTimeString(void 0,{hour:`2-digit`,minute:`2-digit`}):`-`}var M2e=[{label:`Off`,value:0},{label:`1m`,value:60},{label:`2m`,value:120},{label:`5m`,value:300},{label:`10m`,value:600},{label:`30m`,value:1800}];function N2e({device:e}){let{t}=U(),[n,r]=(0,y.useState)(null),[i,a]=(0,y.useState)(``),[o,s]=(0,y.useState)(``),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(null);return(0,y.useEffect)(()=>{!i&&e.backend_url&&a(e.backend_url)},[e.backend_url,i]),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2`,children:[(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-zinc-300 mb-2`,children:t(`spoolbuddy.settings.nfcReader`,`NFC Reader`)}),(0,G.jsxs)(`div`,{className:`space-y-1.5 text-xs`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.type`,`Type`)}),(0,G.jsx)(`span`,{className:`text-zinc-300 font-mono`,children:e.nfc_reader_type||`N/A`})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.connection`,`Connection`)}),(0,G.jsx)(`span`,{className:`text-zinc-300 font-mono`,children:e.nfc_connection||`N/A`})]}),(0,G.jsxs)(`div`,{className:`flex justify-between items-center`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.status.status`,`Status`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full ${e.nfc_ok?`bg-green-500`:e.nfc_reader_type?`bg-red-500`:`bg-zinc-600`}`}),(0,G.jsx)(`span`,{className:e.nfc_ok?`text-green-400`:e.nfc_reader_type?`text-red-400`:`text-zinc-500`,children:e.nfc_ok?t(`spoolbuddy.status.nfcReady`,`Ready`):e.nfc_reader_type?t(`common.error`,`Error`):t(`spoolbuddy.settings.notConnected`,`N/A`)})]})]})]})]}),(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-zinc-300 mb-2`,children:t(`spoolbuddy.settings.deviceInfo`,`Device Info`)}),(0,G.jsxs)(`div`,{className:`space-y-1.5 text-xs`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.hostname`,`Host`)}),(0,G.jsx)(`span`,{className:`text-zinc-300 truncate ml-2`,children:e.hostname})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:`IP`}),(0,G.jsx)(`span`,{className:`text-zinc-300`,children:e.ip_address})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.uptime`,`Uptime`)}),(0,G.jsx)(`span`,{className:`text-zinc-300`,children:A2e(e.uptime_s)})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:`ID`}),(0,G.jsx)(`span`,{className:`text-zinc-400 font-mono truncate ml-2`,children:e.device_id})]})]})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2`,children:[(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3 space-y-2`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-zinc-300`,children:t(`spoolbuddy.settings.systemConfig`,`Backend & Auth`)}),(0,G.jsx)(`input`,{value:i,onChange:e=>a(e.target.value),placeholder:`http://192.168.1.100:5000`,className:`w-full px-2 py-1.5 rounded bg-zinc-900 border border-zinc-700 text-zinc-100 text-xs`}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`input`,{type:`password`,value:o,onChange:e=>s(e.target.value),placeholder:t(`spoolbuddy.settings.apiTokenPlaceholder`,`API token`),className:`flex-1 px-2 py-1.5 rounded bg-zinc-900 border border-zinc-700 text-zinc-100 text-xs`}),(0,G.jsx)(`button`,{onClick:async()=>{if(!i.trim()){d({type:`error`,text:t(`spoolbuddy.settings.systemFieldsRequired`,`Backend URL is required.`)});return}l(!0),d(null);try{await Dd.updateSystemConfig(e.device_id,i.trim(),o.trim()||void 0),d({type:`ok`,text:t(`spoolbuddy.settings.systemQueued`,`Config queued.`)})}catch(e){d({type:`error`,text:e instanceof Error?e.message:t(`common.error`,`Error`)})}finally{l(!1)}},disabled:c,className:`px-3 py-1.5 rounded bg-green-700 hover:bg-green-600 disabled:bg-zinc-700 text-xs font-medium text-zinc-100`,children:t(`spoolbuddy.settings.saveConfig`,`Save`)})]}),u&&(0,G.jsx)(`div`,{className:`text-xs ${u.type===`ok`?`text-green-400`:`text-red-400`}`,children:u.text})]}),(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3 flex flex-col gap-2`,children:[(0,G.jsxs)(`button`,{onClick:()=>r(`nfc`),className:`flex-1 bg-blue-700 hover:bg-blue-600 transition-colors rounded-lg p-2 flex items-center gap-2`,children:[(0,G.jsx)(Ju,{className:`w-4 h-4 text-blue-300 shrink-0`}),(0,G.jsx)(`span`,{className:`text-xs font-medium text-blue-100`,children:t(`spoolbuddy.settings.nfcDiagnostic`,`NFC Diagnostic`)})]}),(0,G.jsxs)(`button`,{onClick:()=>r(`scale`),className:`flex-1 bg-yellow-700 hover:bg-yellow-600 transition-colors rounded-lg p-2 flex items-center gap-2`,children:[(0,G.jsx)(rd,{className:`w-4 h-4 text-yellow-300 shrink-0`}),(0,G.jsx)(`span`,{className:`text-xs font-medium text-yellow-100`,children:t(`spoolbuddy.settings.scaleDiagnostic`,`Scale Diagnostic`)})]}),(0,G.jsxs)(`button`,{onClick:()=>r(`read_tag`),className:`flex-1 bg-emerald-700 hover:bg-emerald-600 transition-colors rounded-lg p-2 flex items-center gap-2`,children:[(0,G.jsx)(dc,{className:`w-4 h-4 text-emerald-300 shrink-0`}),(0,G.jsx)(`span`,{className:`text-xs font-medium text-emerald-100`,children:t(`spoolbuddy.settings.readTagDiagnostic`,`Read Tag`)})]})]})]}),n&&e&&(0,G.jsx)(k2e,{type:n,deviceId:e.device_id,onClose:()=>r(null)})]})}function P2e({device:e,onBrightnessChange:t}){let{t:n}=U(),[r,i]=(0,y.useState)(e.display_brightness),[a,o]=(0,y.useState)(e.display_blank_timeout),[s,c]=(0,y.useState)(!1),l=(0,y.useRef)(void 0),u=(0,y.useRef)(void 0);(0,y.useEffect)(()=>{i(e.display_brightness),o(e.display_blank_timeout)},[e.display_brightness,e.display_blank_timeout]);let d=(0,y.useCallback)(()=>{c(!0),u.current&&clearTimeout(u.current),u.current=setTimeout(()=>c(!1),1500)},[]),f=(0,y.useCallback)((t,n)=>{l.current&&clearTimeout(l.current),l.current=setTimeout(()=>{Dd.updateDisplay(e.device_id,t,n).then(()=>d()).catch(e=>console.error(`Failed to update display:`,e))},300)},[e.device_id,d]),p=e=>{i(e),t(e),f(e,a)},m=e=>{o(e),f(r,e)};return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-zinc-300`,children:n(`spoolbuddy.settings.brightness`,`Brightness`)}),s&&(0,G.jsxs)(`span`,{className:`text-xs text-green-400 flex items-center gap-1 animate-pulse`,children:[(0,G.jsx)(`svg`,{className:`w-3 h-3`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,strokeWidth:3,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,d:`M5 13l4 4L19 7`})}),n(`spoolbuddy.settings.saved`,`Saved`)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`svg`,{className:`w-4 h-4 text-zinc-500 flex-shrink-0`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,strokeWidth:2,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,d:`M12 3v1m0 16v1m9-9h-1M4 12H3m15.364 6.364l-.707-.707M6.343 6.343l-.707-.707m12.728 0l-.707.707M6.343 17.657l-.707.707M16 12a4 4 0 11-8 0 4 4 0 018 0z`})}),(0,G.jsx)(`input`,{type:`range`,min:0,max:100,value:r,onChange:e=>p(parseInt(e.target.value)),className:`flex-1 h-2 bg-zinc-700 rounded-lg appearance-none cursor-pointer accent-green-500`}),(0,G.jsxs)(`span`,{className:`text-sm font-mono text-zinc-400 w-10 text-right`,children:[r,`%`]})]}),!e.has_backlight&&(0,G.jsx)(`p`,{className:`text-xs text-zinc-600 mt-2`,children:n(`spoolbuddy.settings.noBacklight`,`No DSI backlight detected. Brightness control requires a DSI display.`)})]}),(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-4`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-zinc-300 mb-1`,children:n(`spoolbuddy.settings.screenBlank`,`Screen Blank Timeout`)}),(0,G.jsx)(`p`,{className:`text-xs text-zinc-500 mb-3`,children:n(`spoolbuddy.settings.screenBlankDesc`,`Screen turns off after inactivity. Touch to wake.`)}),(0,G.jsx)(`div`,{className:`grid grid-cols-3 gap-2`,children:M2e.map(e=>(0,G.jsx)(`button`,{onClick:()=>m(e.value),className:`px-3 py-2 rounded-lg text-sm font-medium transition-colors min-h-[40px] ${a===e.value?`bg-green-600 text-white`:`bg-zinc-700 text-zinc-300 hover:bg-zinc-600`}`,children:e.label},e.value))})]}),(0,G.jsx)(`p`,{className:`text-xs text-zinc-600 text-center`,children:n(`spoolbuddy.settings.displayNote`,`Brightness is applied as a software filter.`)})]})}function F2e({step:e,labels:t}){return(0,G.jsxs)(`div`,{className:`flex flex-col items-center w-16 shrink-0 pt-1`,children:[(0,G.jsx)(`div`,{className:`flex items-center justify-center w-7 h-7 rounded-full text-xs font-bold ${e===`tare`?`bg-green-600 text-white`:`bg-green-600/20 text-green-400`}`,children:e===`weight`?(0,G.jsx)(`svg`,{className:`w-3.5 h-3.5`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,strokeWidth:3,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,d:`M5 13l4 4L19 7`})}):`1`}),(0,G.jsx)(`span`,{className:`text-[10px] mt-0.5 ${e===`tare`?`text-green-400 font-medium`:`text-green-400/60`}`,children:t.tare}),(0,G.jsx)(`div`,{className:`w-px h-5 my-1 ${e===`weight`?`bg-green-600/40`:`bg-zinc-700`}`}),(0,G.jsx)(`div`,{className:`flex items-center justify-center w-7 h-7 rounded-full text-xs font-bold ${e===`weight`?`bg-green-600 text-white`:`bg-zinc-700 text-zinc-500`}`,children:`2`}),(0,G.jsx)(`span`,{className:`text-[10px] mt-0.5 ${e===`weight`?`text-green-400 font-medium`:`text-zinc-600`}`,children:t.weight})]})}function I2e({device:e,weight:t,weightStable:n,rawAdc:r}){let{t:i}=U(),a=co(),[o,s]=(0,y.useState)(`idle`),[c,l]=(0,y.useState)(`500`),[u,d]=(0,y.useState)(null),[f,p]=(0,y.useState)(!1),[m,h]=(0,y.useState)(null),[g,_]=(0,y.useState)(null),v=(0,y.useRef)(null);(0,y.useEffect)(()=>()=>{v.current&&clearTimeout(v.current)},[]);let b=(0,y.useCallback)(e=>{v.current&&clearTimeout(v.current),v.current=setTimeout(()=>h(null),e)},[]);(0,y.useEffect)(()=>{if(!g)return;let e=()=>Date.now()-g.startedAtMs,t=setInterval(()=>{a.invalidateQueries({queryKey:[`spoolbuddy-devices`]})},1e3),n=setTimeout(()=>{_(null),h({type:`error`,msg:i(`spoolbuddy.settings.tareTimedOut`,`Tare timed out — is the SpoolBuddy daemon running?`)}),b(5e3)},Math.max(0,15e3-e()));return()=>{clearInterval(t),clearTimeout(n)}},[g,a,i,b]),(0,y.useEffect)(()=>{g&&(e?.last_calibrated_at??null)!==g.snapshot&&(_(null),h({type:`ok`,msg:i(`spoolbuddy.settings.tareComplete`,`Tare complete!`)}),b(3e3))},[e?.last_calibrated_at,g,i,b]);let x=e=>{e===`backspace`?l(e=>e.slice(0,-1)||``):e===`.`&&!c.includes(`.`)?l(e=>e+`.`):e>=`0`&&e<=`9`&&l(t=>t===`0`?e:t+e)};return o===`idle`?(0,G.jsxs)(`div`,{className:`flex flex-col h-full`,children:[(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3 mb-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full ${n?`bg-green-500`:`bg-amber-500 animate-pulse`}`}),(0,G.jsx)(`span`,{className:`text-lg font-mono text-zinc-200`,children:t===null?`-- g`:`${t.toFixed(1)} g`})]}),(0,G.jsxs)(`div`,{className:`text-xs text-zinc-500 text-right`,children:[(0,G.jsxs)(`span`,{children:[i(`spoolbuddy.settings.tareOffset`,`Tare`),`: `,e.tare_offset]}),(0,G.jsx)(`span`,{className:`mx-1.5`,children:`·`}),(0,G.jsxs)(`span`,{children:[i(`spoolbuddy.settings.calFactor`,`Factor`),`: `,e.calibration_factor.toFixed(2)]})]})]}),e.last_calibrated_at&&(0,G.jsxs)(`div`,{className:`text-xs text-zinc-600 mt-1`,children:[i(`spoolbuddy.settings.lastCalibrated`,`Last calibrated`),`: `,j2e(e.last_calibrated_at)]})]}),m&&(0,G.jsx)(`div`,{className:`rounded-lg px-3 py-2 mb-3 text-sm ${m.type===`ok`?`bg-green-900/30 text-green-300 border border-green-800`:`bg-red-900/30 text-red-300 border border-red-800`}`,children:m.msg}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(`button`,{onClick:async()=>{p(!0),h(null),v.current&&=(clearTimeout(v.current),null);let t=e?.last_calibrated_at??null;try{await Dd.tare(e.device_id),h({type:`ok`,msg:i(`spoolbuddy.settings.tareSet`,`Tare command sent. Waiting for device...`)}),_({snapshot:t,startedAtMs:Date.now()})}catch{h({type:`error`,msg:i(`spoolbuddy.settings.tareFailed`,`Failed to send tare command`)}),b(5e3)}finally{p(!1)}},disabled:f,className:`flex-1 px-4 py-2.5 rounded-lg text-sm font-medium bg-zinc-700 text-zinc-200 hover:bg-zinc-600 disabled:opacity-40 transition-colors min-h-[44px] flex items-center justify-center gap-2`,children:[f&&(0,G.jsxs)(`svg`,{className:`w-4 h-4 animate-spin`,viewBox:`0 0 24 24`,fill:`none`,children:[(0,G.jsx)(`circle`,{className:`opacity-25`,cx:`12`,cy:`12`,r:`10`,stroke:`currentColor`,strokeWidth:`4`}),(0,G.jsx)(`path`,{className:`opacity-75`,fill:`currentColor`,d:`M4 12a8 8 0 018-8V0C5.373 0 0 5.373 0 12h4z`})]}),i(`spoolbuddy.weight.tare`,`Tare`)]}),(0,G.jsx)(`button`,{onClick:()=>{s(`tare`),h(null)},className:`flex-1 px-4 py-2.5 rounded-lg text-sm font-medium bg-green-600 text-white hover:bg-green-700 transition-colors min-h-[44px]`,children:i(`spoolbuddy.weight.calibrate`,`Calibrate`)})]})]}):(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(F2e,{step:o,labels:{tare:i(`spoolbuddy.weight.tare`,`Tare`),weight:i(`spoolbuddy.settings.knownWeight`,`Known weight`)}}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 bg-zinc-800 rounded-lg px-3 py-1.5 mb-1.5`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full shrink-0 ${n?`bg-green-500`:`bg-amber-500 animate-pulse`}`}),(0,G.jsx)(`span`,{className:`text-sm font-mono text-zinc-200`,children:t===null?`-- g`:`${t.toFixed(1)} g`}),(0,G.jsx)(`span`,{className:`text-xs ml-auto ${n?`text-green-400`:`text-amber-400`}`,children:n?i(`spoolbuddy.settings.stable`,`Stable`):i(`spoolbuddy.settings.settling`,`Settling...`)})]}),m&&(0,G.jsx)(`div`,{className:`rounded-lg px-3 py-1.5 mb-1.5 text-xs ${m.type===`ok`?`bg-green-900/30 text-green-300 border border-green-800`:`bg-red-900/30 text-red-300 border border-red-800`}`,children:m.msg}),o===`tare`?(0,G.jsx)(`p`,{className:`text-sm text-zinc-300 mb-3`,children:i(`spoolbuddy.settings.calStep1`,`Remove all items from the scale and press Set Zero.`)}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1.5`,children:[(0,G.jsx)(`span`,{className:`text-xs text-zinc-400 shrink-0`,children:i(`spoolbuddy.settings.knownWeight`,`Known weight`)}),(0,G.jsxs)(`div`,{className:`flex-1 bg-zinc-900 border border-zinc-600 rounded px-3 py-1 text-right text-lg font-mono text-zinc-100`,children:[c||`0`,(0,G.jsx)(`span`,{className:`text-zinc-500 ml-1`,children:`g`})]})]}),(0,G.jsx)(`div`,{className:`grid grid-cols-4 gap-1 mb-1.5`,children:[`7`,`8`,`9`,`backspace`,`4`,`5`,`6`,`.`,`1`,`2`,`3`,`0`].map(e=>(0,G.jsx)(`button`,{onClick:()=>x(e),className:`rounded text-lg font-medium transition-colors h-[48px] active:scale-95 ${e===`backspace`?`bg-zinc-700 text-zinc-300 hover:bg-zinc-600`:`bg-zinc-800 text-zinc-100 hover:bg-zinc-700 border border-zinc-700`}`,children:e===`backspace`?`⌫`:e},e))})]}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`button`,{onClick:()=>{s(`idle`),h(null)},className:`flex-1 px-4 py-2 rounded-lg text-sm bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors h-[40px]`,children:i(`common.cancel`,`Cancel`)}),(0,G.jsxs)(`button`,{onClick:async()=>{if(o===`tare`){p(!0),h(null);try{d(r),await Dd.tare(e.device_id),h({type:`ok`,msg:i(`spoolbuddy.settings.zeroSet`,`Zero point set. Place known weight on scale.`)}),s(`weight`)}catch{h({type:`error`,msg:i(`spoolbuddy.settings.tareFailed`,`Failed to send tare command`)})}finally{p(!1)}}else if(o===`weight`){let t=parseFloat(c);if(r===null||!t||t<=0)return;p(!0),h(null);try{await Dd.setCalibrationFactor(e.device_id,t,r,u??void 0),h({type:`ok`,msg:i(`spoolbuddy.settings.calibrationDone`,`Calibration complete!`)}),b(3e3),s(`idle`)}catch{h({type:`error`,msg:i(`spoolbuddy.settings.calibrationFailed`,`Calibration failed`)}),b(5e3)}finally{p(!1)}}},disabled:f,className:`flex-1 px-4 py-2 rounded-lg text-sm font-medium bg-green-600 text-white hover:bg-green-700 disabled:opacity-40 transition-colors h-[40px] flex items-center justify-center gap-2`,children:[f&&(0,G.jsxs)(`svg`,{className:`w-4 h-4 animate-spin`,viewBox:`0 0 24 24`,fill:`none`,children:[(0,G.jsx)(`circle`,{className:`opacity-25`,cx:`12`,cy:`12`,r:`10`,stroke:`currentColor`,strokeWidth:`4`}),(0,G.jsx)(`path`,{className:`opacity-75`,fill:`currentColor`,d:`M4 12a8 8 0 018-8V0C5.373 0 0 5.373 0 12h4z`})]}),o===`tare`?i(`spoolbuddy.settings.setZero`,`Set Zero`):i(`spoolbuddy.settings.calibrateNow`,`Calibrate`)]})]})]})]})}function L2e({device:e}){let{t}=U(),[n,r]=(0,y.useState)(null),[i,a]=(0,y.useState)(null),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(!1),u=e.update_status===`pending`||e.update_status===`updating`;(0,y.useEffect)(()=>{u&&n===`applying`&&r(null)},[u,n]),(0,y.useEffect)(()=>{let e=()=>{u&&setTimeout(()=>window.location.reload(),1e3)};return window.addEventListener(`spoolbuddy-online`,e),()=>window.removeEventListener(`spoolbuddy-online`,e)},[u]);let{data:d,refetch:f}=K({queryKey:[`spoolbuddy-update-check`,e.device_id],queryFn:()=>Dd.checkDaemonUpdate(e.device_id),staleTime:0}),{data:p}=K({queryKey:[`spoolbuddy-ssh-key`],queryFn:()=>Dd.getSSHPublicKey(),enabled:o,staleTime:1/0}),m=async()=>{r(`checking`),a(null);try{await f()}finally{r(null)}},h=async()=>{r(`applying`),a(null);try{await Dd.triggerUpdate(e.device_id)}catch(e){a(e instanceof Error?e.message:`Failed to trigger update`),r(null)}},g=n!=null||u,_=()=>{p?.public_key&&(navigator.clipboard.writeText(p.public_key),l(!0),setTimeout(()=>l(!1),2e3))},v=e.firmware_version||(d?.current_version&&d.current_version!==`0.0.0`?d.current_version:null);return(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3 space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between items-center text-sm`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.currentVersion`,`Current Version`)}),(0,G.jsx)(`span`,{className:`text-zinc-200 font-mono`,children:v||(0,G.jsx)(`span`,{className:`text-zinc-500 italic text-xs`,children:t(`spoolbuddy.settings.versionPending`,`Waiting for daemon...`)})})]}),g?(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`svg`,{className:`w-4 h-4 animate-spin text-green-400 flex-shrink-0`,viewBox:`0 0 24 24`,fill:`none`,children:[(0,G.jsx)(`circle`,{className:`opacity-25`,cx:`12`,cy:`12`,r:`10`,stroke:`currentColor`,strokeWidth:`4`}),(0,G.jsx)(`path`,{className:`opacity-75`,fill:`currentColor`,d:`M4 12a8 8 0 018-8V0C5.373 0 0 5.373 0 12h4z`})]}),(0,G.jsx)(`span`,{className:`text-green-300 text-xs`,children:n===`checking`?t(`spoolbuddy.settings.checking`,`Checking for updates...`):e.update_message||t(`spoolbuddy.settings.updateWaiting`,`Updating...`)})]}):e.update_status===`error`?(0,G.jsx)(`p`,{className:`text-xs text-red-300`,children:e.update_message||t(`spoolbuddy.settings.updateFailed`,`Update failed`)}):i?(0,G.jsx)(`p`,{className:`text-xs text-red-300`,children:i}):d?.update_available?(0,G.jsxs)(`p`,{className:`text-xs text-green-300`,children:[t(`spoolbuddy.settings.updateAvailable`,`Update available`),`: `,v,` → `,d.latest_version]}):null,!g&&(d?.update_available?(0,G.jsx)(`button`,{onClick:h,disabled:!e.online,className:`w-full px-3 py-2 rounded-lg text-sm font-medium bg-green-600 text-white hover:bg-green-700 disabled:opacity-40 transition-colors`,children:e.online?t(`spoolbuddy.settings.applyUpdate`,`Apply Update`):t(`spoolbuddy.settings.deviceOffline`,`Device Offline`)}):(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`button`,{onClick:m,className:`flex-1 px-3 py-2 rounded-lg text-xs font-medium bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors`,children:t(`spoolbuddy.settings.checkUpdates`,`Check for Updates`)}),(0,G.jsx)(`button`,{onClick:h,disabled:!e.online,className:`px-3 py-2 rounded-lg text-xs font-medium bg-zinc-700 text-zinc-400 hover:bg-zinc-600 hover:text-zinc-200 disabled:opacity-40 transition-colors`,children:t(`spoolbuddy.settings.forceUpdate`,`Force Update`)})]}))]}),(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3`,children:[(0,G.jsxs)(`button`,{onClick:()=>s(!o),className:`w-full flex justify-between items-center text-xs`,children:[(0,G.jsx)(`span`,{className:`font-medium text-zinc-400`,children:t(`spoolbuddy.settings.sshSetup`,`SSH Setup`)}),(0,G.jsx)(`svg`,{className:`w-3 h-3 text-zinc-500 transition-transform ${o?`rotate-180`:``}`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,strokeWidth:2,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,d:`M19 9l-7 7-7-7`})})]}),o&&(0,G.jsxs)(`div`,{className:`mt-2 space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-zinc-500`,children:t(`spoolbuddy.settings.sshDescription`,`SSH key is deployed automatically. For manual setup, add this key to ~/.ssh/authorized_keys on the device.`)}),p?.public_key?(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`pre`,{className:`bg-zinc-900 rounded p-2 text-[10px] text-zinc-400 font-mono break-all whitespace-pre-wrap`,children:p.public_key}),(0,G.jsx)(`button`,{onClick:_,className:`absolute top-1 right-1 px-1.5 py-0.5 rounded text-[10px] bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors`,children:c?t(`common.copied`,`Copied!`):t(`common.copy`,`Copy`)})]}):(0,G.jsx)(`span`,{className:`text-[10px] text-zinc-500 italic`,children:t(`spoolbuddy.settings.sshKeyLoading`,`Loading...`)})]})]})]})}function R2e({percent:e,color:t}){return(0,G.jsx)(`div`,{className:`w-full h-2 bg-zinc-700 rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full transition-all ${t}`,style:{width:`${Math.min(100,Math.max(0,e))}%`}})})}function z2e(e){let t=Math.floor(e/86400),n=Math.floor(e%86400/3600),r=Math.floor(e%3600/60);return t>0?`${t}d ${n}h ${r}m`:n>0?`${n}h ${r}m`:`${r}m`}function B2e({device:e}){let{t}=U(),n=e.system_stats;if(!n)return(0,G.jsx)(`div`,{className:`flex items-center justify-center h-32`,children:(0,G.jsx)(`p`,{className:`text-sm text-zinc-500`,children:t(`spoolbuddy.settings.systemStatsWaiting`,`Waiting for system stats...`)})});let r=n.memory,i=n.disk,a=(n.cpu_temp_c??0)>=80?`text-red-400`:(n.cpu_temp_c??0)>=65?`text-amber-400`:`text-green-400`,o=(r?.percent??0)>=90?`bg-red-500`:(r?.percent??0)>=70?`bg-amber-500`:`bg-green-500`,s=(i?.percent??0)>=90?`bg-red-500`:(i?.percent??0)>=70?`bg-amber-500`:`bg-green-500`;return(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2`,children:[(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-zinc-300 mb-2`,children:`CPU`}),(0,G.jsxs)(`div`,{className:`space-y-1.5 text-xs`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.cores`,`Cores`)}),(0,G.jsx)(`span`,{className:`text-zinc-300 font-mono`,children:n.cpu_count??`-`})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.loadAvg`,`Load Avg`)}),(0,G.jsx)(`span`,{className:`text-zinc-300 font-mono`,children:n.load_avg?n.load_avg.join(` / `):`-`})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.temp`,`Temp`)}),(0,G.jsx)(`span`,{className:`font-mono font-medium ${a}`,children:n.cpu_temp_c==null?`-`:`${n.cpu_temp_c}\u00B0C`})]})]})]}),(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-zinc-300 mb-2`,children:t(`spoolbuddy.settings.memory`,`Memory`)}),r?(0,G.jsxs)(`div`,{className:`space-y-1.5`,children:[(0,G.jsx)(R2e,{percent:r.percent??0,color:o}),(0,G.jsxs)(`div`,{className:`space-y-1 text-xs`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.used`,`Used`)}),(0,G.jsxs)(`span`,{className:`text-zinc-300 font-mono`,children:[r.used_mb,` / `,r.total_mb,` MB`]})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.available`,`Free`)}),(0,G.jsxs)(`span`,{className:`text-zinc-300 font-mono`,children:[r.available_mb,` MB`]})]})]})]}):(0,G.jsx)(`span`,{className:`text-xs text-zinc-500`,children:`-`})]})]}),(0,G.jsx)(`div`,{className:`bg-zinc-800 rounded-lg px-3 py-2`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-zinc-300 shrink-0`,children:t(`spoolbuddy.settings.disk`,`Disk`)}),i?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`flex-1`,children:(0,G.jsx)(R2e,{percent:i.percent??0,color:s})}),(0,G.jsxs)(`span`,{className:`text-xs text-zinc-300 font-mono shrink-0`,children:[i.used_gb,` / `,i.total_gb,` GB`]})]}):(0,G.jsx)(`span`,{className:`text-xs text-zinc-500`,children:`-`})]})}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2`,children:[(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-zinc-300 mb-1.5`,children:t(`spoolbuddy.settings.osInfo`,`OS`)}),(0,G.jsxs)(`div`,{className:`space-y-1 text-xs`,children:[n.os?.os&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.distro`,`Distro`)}),(0,G.jsx)(`span`,{className:`text-zinc-300 truncate ml-2`,children:n.os.os})]}),n.os?.kernel&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.kernel`,`Kernel`)}),(0,G.jsx)(`span`,{className:`text-zinc-300 font-mono truncate ml-2`,children:n.os.kernel})]}),n.os?.arch&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.arch`,`Arch`)}),(0,G.jsx)(`span`,{className:`text-zinc-300 font-mono`,children:n.os.arch})]})]})]}),(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-zinc-300 mb-1.5`,children:t(`spoolbuddy.settings.runtime`,`Runtime`)}),(0,G.jsxs)(`div`,{className:`space-y-1 text-xs`,children:[n.os?.python&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:`Python`}),(0,G.jsx)(`span`,{className:`text-zinc-300 font-mono`,children:n.os.python})]}),n.system_uptime_s!=null&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.systemUptime`,`Uptime`)}),(0,G.jsx)(`span`,{className:`text-zinc-300`,children:z2e(n.system_uptime_s)})]})]})]})]})]})}function V2e(){let{sbState:e,setDisplayBrightness:t}=lr(),{t:n}=U(),[r,i]=(0,y.useState)(`device`),{data:a=[]}=K({queryKey:[`spoolbuddy-devices`],queryFn:()=>Dd.getDevices(),refetchInterval:1e4}),o=e.deviceId?a.find(t=>t.device_id===e.deviceId)??a[0]:a[0],s=[{id:`device`,label:n(`spoolbuddy.settings.tabDevice`,`Device`)},{id:`display`,label:n(`spoolbuddy.settings.tabDisplay`,`Display`)},{id:`scale`,label:n(`spoolbuddy.settings.tabScale`,`Scale`)},{id:`updates`,label:n(`spoolbuddy.settings.tabUpdates`,`Updates`)},{id:`system`,label:n(`spoolbuddy.settings.tabSystem`,`System`)}];return(0,G.jsxs)(`div`,{className:`h-full flex flex-col p-4`,children:[(0,G.jsx)(`h1`,{className:`text-xl font-semibold text-zinc-100 mb-3`,children:n(`spoolbuddy.nav.settings`,`Settings`)}),(0,G.jsx)(`div`,{className:`flex gap-1 bg-zinc-800/50 rounded-lg p-1 mb-4`,children:s.map(e=>(0,G.jsx)(`button`,{onClick:()=>i(e.id),className:`flex-1 px-2 py-2 rounded-md text-sm font-medium transition-colors min-h-[36px] ${r===e.id?`bg-zinc-700 text-zinc-100`:`text-zinc-500 hover:text-zinc-300`}`,children:e.label},e.id))}),(0,G.jsx)(`div`,{className:`flex-1 min-h-0 overflow-y-auto`,children:o?(0,G.jsxs)(G.Fragment,{children:[r===`device`&&(0,G.jsx)(N2e,{device:o}),r===`display`&&(0,G.jsx)(P2e,{device:o,onBrightnessChange:t}),r===`scale`&&(0,G.jsx)(I2e,{device:o,weight:e.weight,weightStable:e.weightStable,rawAdc:e.rawAdc}),r===`updates`&&(0,G.jsx)(L2e,{device:o}),r===`system`&&(0,G.jsx)(B2e,{device:o})]}):(0,G.jsx)(`div`,{className:`flex items-center justify-center h-32`,children:(0,G.jsx)(`div`,{className:`text-center text-zinc-500`,children:(0,G.jsx)(`p`,{className:`text-sm`,children:n(`spoolbuddy.settings.noDevice`,`No SpoolBuddy device found`)})})})})]})}function H2e({device:e,weight:t,weightStable:n,rawAdc:r}){let{t:i}=U(),[a,o]=(0,y.useState)(!1),[s,c]=(0,y.useState)(`idle`),[l,u]=(0,y.useState)(`500`),[d,f]=(0,y.useState)(null),[p,m]=(0,y.useState)(!1),h=e=>{e===`backspace`?u(e=>e.slice(0,-1)||``):e===`.`&&!l.includes(`.`)?u(e=>e+`.`):e>=`0`&&e<=`9`&&u(t=>t===`0`?e:t+e)};return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm text-zinc-400`,children:i(`spoolbuddy.settings.currentWeight`,`Current weight`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full ${n?`bg-green-500`:`bg-amber-500 animate-pulse`}`}),(0,G.jsx)(`span`,{className:`text-lg font-mono text-zinc-200`,children:t===null?`-- g`:`${t.toFixed(1)} g`})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-4 mt-3 text-xs`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:i(`spoolbuddy.settings.tareOffset`,`Tare offset`)}),(0,G.jsx)(`span`,{className:`text-zinc-400 font-mono`,children:e.tare_offset})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:i(`spoolbuddy.settings.calFactor`,`Cal. factor`)}),(0,G.jsx)(`span`,{className:`text-zinc-400 font-mono`,children:e.calibration_factor.toFixed(2)})]})]})]}),s===`idle`?(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`button`,{onClick:async()=>{m(!0);try{await Dd.tare(e.device_id)}catch(e){console.error(`Failed to tare:`,e)}finally{m(!1)}},disabled:p,className:`flex-1 px-4 py-2.5 rounded-lg text-sm font-medium bg-zinc-700 text-zinc-200 hover:bg-zinc-600 disabled:opacity-40 transition-colors min-h-[44px]`,children:p?`...`:i(`spoolbuddy.weight.tare`,`Tare`)}),(0,G.jsx)(`button`,{onClick:()=>{c(`tare`)},className:`flex-1 px-4 py-2.5 rounded-lg text-sm font-medium bg-green-600 text-white hover:bg-green-700 transition-colors min-h-[44px]`,children:i(`spoolbuddy.weight.calibrate`,`Calibrate`)})]}):(0,G.jsxs)(`div`,{className:`bg-zinc-800 border border-zinc-700 rounded-lg p-3 space-y-2`,children:[(0,G.jsx)(`div`,{className:`text-sm font-medium text-zinc-200`,children:s===`tare`?i(`spoolbuddy.settings.calStep1`,`Step 1: Remove all items from the scale`):i(`spoolbuddy.settings.calStep2`,`Step 2: Place known weight on scale`)}),s===`weight`&&(0,G.jsxs)(`div`,{className:`space-y-1.5`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-xs text-zinc-400`,children:i(`spoolbuddy.settings.knownWeight`,`Known weight (g)`)}),(0,G.jsxs)(`div`,{className:`flex-1 bg-zinc-900 border border-zinc-600 rounded px-3 py-1.5 text-right text-base font-mono text-zinc-100`,children:[l||`0`,(0,G.jsx)(`span`,{className:`text-zinc-500 ml-1`,children:`g`})]})]}),(0,G.jsx)(`div`,{className:`grid grid-cols-4 gap-1`,children:[`7`,`8`,`9`,`backspace`,`4`,`5`,`6`,`.`,`1`,`2`,`3`,`0`].map(e=>(0,G.jsx)(`button`,{onClick:()=>h(e),className:`py-2 rounded text-sm font-medium transition-colors min-h-[36px] ${e===`backspace`?`bg-zinc-700 text-zinc-300 hover:bg-zinc-600`:`bg-zinc-800 text-zinc-100 hover:bg-zinc-700 border border-zinc-700`}`,children:e===`backspace`?`⌫`:e},e))})]}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`button`,{onClick:()=>c(`idle`),className:`flex-1 px-4 py-2 rounded-lg text-sm bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors min-h-[40px]`,children:i(`common.cancel`,`Cancel`)}),(0,G.jsx)(`button`,{onClick:async()=>{if(s===`tare`){o(!0);try{f(r),await Dd.tare(e.device_id),c(`weight`)}catch(e){console.error(`Failed to tare:`,e)}finally{o(!1)}}else if(s===`weight`){let t=parseFloat(l);if(r===null||!t||t<=0)return;o(!0);try{await Dd.setCalibrationFactor(e.device_id,t,r,d??void 0),c(`idle`)}catch(e){console.error(`Failed to calibrate:`,e)}finally{o(!1)}}},disabled:a,className:`flex-1 px-4 py-2 rounded-lg text-sm font-medium bg-green-600 text-white hover:bg-green-700 disabled:opacity-40 transition-colors min-h-[40px]`,children:a?`...`:s===`tare`?i(`spoolbuddy.settings.setZero`,`Set Zero`):i(`spoolbuddy.settings.calibrateNow`,`Calibrate`)})]})]})]})}function U2e(){let{sbState:e}=lr(),{t}=U(),n=or(),{data:r=[]}=K({queryKey:[`spoolbuddy-devices`],queryFn:()=>Dd.getDevices(),refetchInterval:1e4}),i=e.deviceId?r.find(t=>t.device_id===e.deviceId)??r[0]:r[0];return(0,G.jsxs)(`div`,{className:`h-full flex flex-col p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mb-4`,children:[(0,G.jsx)(`button`,{onClick:()=>n(`/spoolbuddy/settings`),className:`p-1.5 rounded-lg text-zinc-400 hover:text-zinc-200 hover:bg-zinc-800 transition-colors`,children:(0,G.jsx)(`svg`,{className:`w-5 h-5`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,strokeWidth:2,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,d:`M15 19l-7-7 7-7`})})}),(0,G.jsx)(`h1`,{className:`text-xl font-semibold text-zinc-100`,children:t(`spoolbuddy.settings.scaleCalibration`,`Scale Calibration`)})]}),(0,G.jsx)(`div`,{className:`flex-1 min-h-0 overflow-y-auto`,children:i?(0,G.jsx)(H2e,{device:i,weight:e.weight,weightStable:e.weightStable,rawAdc:e.rawAdc}):(0,G.jsx)(`div`,{className:`flex items-center justify-center h-32`,children:(0,G.jsx)(`div`,{className:`text-center text-zinc-500`,children:(0,G.jsx)(`p`,{className:`text-sm`,children:t(`spoolbuddy.settings.noDevice`,`No SpoolBuddy device found`)})})})})]})}function W2e({formData:e,printersWithCalibrations:t,selectedProfiles:n,setSelectedProfiles:r,expandedPrinters:i,setExpandedPrinters:a}){let{t:o}=U(),s=e=>{a(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},c=(e,t,n)=>{let i=`${e}:${t}:${n??`null`}`,a=`${e}:${n??`null`}`;r(e=>{let t=new Set(e);if(t.has(i))t.delete(i);else{for(let e of Array.from(t)){let n=e.split(`:`);`${n[0]}:${n[2]}`===a&&t.delete(e)}t.add(i)}return t})},l=()=>{let n=new Set;for(let{printer:r,calibrations:i}of t){if(!r.connected)continue;let t=i.filter(t=>aW(t,e)),a=new Map;for(let e of t){let t=`${e.extruder_id??`null`}`;a.has(t)||a.set(t,[]),a.get(t).push(e)}for(let[e,t]of a)if(t.length>0){let i=[...t].sort((e,t)=>t.k_value-e.k_value)[0];n.add(`${r.id}:${i.cali_idx}:${e}`)}}r(n)};if(!e.material)return(0,G.jsx)(`div`,{className:`p-6 bg-bambu-dark rounded-lg text-center`,children:(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:o(`inventory.selectMaterialFirst`)})});if(t.length===0)return(0,G.jsx)(`div`,{className:`p-6 bg-bambu-dark rounded-lg text-center`,children:(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:o(`inventory.noPrintersConfigured`)})});let u=t.reduce((t,{printer:n,calibrations:r})=>n.connected?t+r.filter(t=>aW(t,e)).length:t,0),d=(e,t)=>{let r=`${e.id}:${t.cali_idx}:${t.extruder_id??`null`}`,i=n.has(r);return(0,G.jsxs)(`label`,{className:`flex items-center gap-3 p-3 rounded-lg cursor-pointer transition-all border ${i?`bg-bambu-green/10 border-bambu-green/30`:`bg-bambu-dark border-transparent hover:bg-bambu-dark/80`}`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:i,onChange:()=>c(String(e.id),t.cali_idx,t.extruder_id),className:`w-4 h-4 rounded border-bambu-dark-tertiary text-bambu-green focus:ring-bambu-green`}),(0,G.jsx)(`div`,{className:`flex-1 min-w-0`,children:(0,G.jsx)(`span`,{className:`text-sm font-medium ${i?`text-bambu-green`:`text-white`}`,children:t.name||t.filament_id})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 shrink-0`,children:[t.nozzle_diameter&&(0,G.jsxs)(`span`,{className:`text-xs font-mono px-2 py-0.5 rounded bg-bambu-dark text-bambu-gray`,children:[t.nozzle_diameter,`mm`]}),(0,G.jsxs)(`span`,{className:`text-xs font-mono px-2 py-0.5 rounded bg-bambu-dark text-bambu-gray`,children:[`K=`,t.k_value.toFixed(3)]})]})]},`${t.cali_idx}-${t.extruder_id}`)};return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[o(`inventory.matchingFilter`),`: `,e.brand||o(`inventory.anyBrand`),` / `,e.material,` / `,e.subtype||o(`inventory.anyVariant`)]}),u>0&&(0,G.jsxs)(`button`,{type:`button`,onClick:l,className:`flex items-center gap-1.5 px-2 py-1 text-xs bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray hover:text-white hover:border-bambu-green transition-colors`,children:[(0,G.jsx)(gu,{className:`w-3.5 h-3.5`}),o(`inventory.autoSelect`),` (`,u,`)`]})]}),(0,G.jsx)(`div`,{className:`space-y-3`,children:t.map(({printer:t,calibrations:n})=>{let r=i.has(String(t.id)),a=n.filter(t=>aW(t,e)),c=a.length,l=a.some(e=>e.extruder_id!==void 0&&e.extruder_id!==null&&e.extruder_id>0),u=a.filter(e=>e.extruder_id===1),f=a.filter(e=>e.extruder_id===0||e.extruder_id===void 0||e.extruder_id===null);return(0,G.jsxs)(`div`,{className:`border border-bambu-dark-tertiary rounded-lg overflow-hidden`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>s(String(t.id)),className:`w-full px-4 py-3 flex items-center justify-between bg-bambu-dark-secondary hover:bg-bambu-dark-tertiary transition-colors`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[r?(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray`}):(0,G.jsx)(ms,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`span`,{className:`font-medium text-white`,children:t.name}),c>0?(0,G.jsxs)(`span`,{className:`text-xs px-2 py-0.5 rounded-full bg-bambu-green/20 text-bambu-green`,children:[c,` `,o(c===1?`inventory.match`:`inventory.matches`)]}):(0,G.jsx)(`span`,{className:`text-xs px-2 py-0.5 rounded-full bg-bambu-dark-tertiary text-bambu-gray`,children:o(`inventory.noMatches`)})]}),(0,G.jsx)(`span`,{className:`text-xs px-2 py-1 rounded-full ${t.connected?`bg-green-500/20 text-green-500`:`bg-bambu-gray/20 text-bambu-gray`}`,children:t.connected?o(`inventory.connected`):o(`inventory.offline`)})]}),r&&(0,G.jsx)(`div`,{className:`px-4 py-3 space-y-3 bg-bambu-dark border-t border-bambu-dark-tertiary`,children:t.connected?c===0?(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic py-2`,children:o(`inventory.noKProfilesMatch`)}):l?(0,G.jsxs)(G.Fragment,{children:[u.length>0&&(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:o(`inventory.leftNozzle`)}),(0,G.jsx)(`div`,{className:`space-y-2`,children:u.map(e=>d(t,e))})]}),f.length>0&&(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:o(`inventory.rightNozzle`)}),(0,G.jsx)(`div`,{className:`space-y-2`,children:f.map(e=>d(t,e))})]})]}):(0,G.jsx)(`div`,{className:`space-y-2`,children:a.map(e=>d(t,e))}):(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic py-2`,children:o(`inventory.printerOffline`)})})]},t.id)})}),n.size>0&&(0,G.jsx)(`div`,{className:`p-3 bg-bambu-green/10 border border-bambu-green/30 rounded-lg`,children:(0,G.jsxs)(`p`,{className:`text-sm text-white`,children:[(0,G.jsx)(`span`,{className:`font-semibold`,children:n.size}),` `,o(`inventory.profilesSelected`)]})})]})}function X9(e){return Ef(e.color_name,e.rgba,e.color_name_is_synthesized)}var G2e=[`PLA`,`PETG`,`ABS`,`ASA`,`TPU`,`PA`,`PC`,`PVA`,`HIPS`];function K2e(){let{t:e}=U(),t=Mf(),{showToast:n}=Gd(),{sbState:r}=lr(),[i,a]=(0,y.useState)(`existing`),[o,s]=(0,y.useState)(null),[c,l]=(0,y.useState)(``),[u,d]=(0,y.useState)(`idle`),[f,p]=(0,y.useState)(``),[m,h]=(0,y.useState)(!1),[g,_]=(0,y.useState)(!1),[v,b]=(0,y.useState)(null),{data:x}=K({queryKey:[`spoolman-settings`],queryFn:Z.getSpoolmanSettings,staleTime:300*1e3}),S=x!==void 0,C=x?.spoolman_enabled===`true`&&!!x?.spoolman_url,{data:w=[],refetch:T}=K({queryKey:[C?`spoolman-inventory-spools`:`inventory-spools`,`write-tag`],queryFn:()=>C?Z.getSpoolmanInventorySpools(!1):Z.getSpools(!1),refetchInterval:1e4,enabled:S}),{data:E=[]}=K({queryKey:[`spoolbuddy-devices`],queryFn:()=>Dd.getDevices(),refetchInterval:5e3}),{data:D}=K({queryKey:[`settings`],queryFn:Z.getSettings}),O=E[0],k=r.deviceOnline,A=Pf(D?.currency||`USD`),j=(0,y.useMemo)(()=>{let e;if(i===`existing`)e=w.filter(e=>!e.tag_uid&&!e.archived_at);else if(i===`replace`)e=w.filter(e=>(e.tag_uid||e.tray_uuid)&&!e.archived_at);else return[];if(c){let t=c.toLowerCase();e=e.filter(e=>e.material?.toLowerCase().includes(t)||X9(e)?.toLowerCase().includes(t)||e.color_name?.toLowerCase().includes(t)||e.brand?.toLowerCase().includes(t)||e.subtype?.toLowerCase().includes(t))}return e},[w,i,c,t]),M=(0,y.useCallback)(e=>{let t=e.detail;(t.sak??t.data?.sak)===0&&(_(!0),b(t.tag_uid??t.data?.tag_uid??null))},[]),N=(0,y.useCallback)(e=>{let t=e.detail;_(!0),b(t.tag_uid??t.data?.tag_uid??null)},[]),P=(0,y.useCallback)(()=>{_(!1),b(null)},[]),F=(0,y.useCallback)(t=>{let n=t.detail;(n.spool_id===o?.id||n.data?.spool_id===o?.id)&&(d(`success`),p(e(`spoolbuddy.writeTag.writeSuccess`,`Tag written successfully!`)),T(),setTimeout(()=>{d(`idle`),s(null),p(``)},5e3))},[o,e,T]),I=(0,y.useCallback)(t=>{let n=t.detail;(n.spool_id===o?.id||n.data?.spool_id===o?.id)&&(d(`error`),p(n.message??n.data?.message??e(`spoolbuddy.writeTag.writeFailed`,`Write failed`)))},[o,e]);(0,y.useEffect)(()=>(window.addEventListener(`spoolbuddy-unknown-tag`,M),window.addEventListener(`spoolbuddy-tag-matched`,N),window.addEventListener(`spoolbuddy-tag-removed`,P),window.addEventListener(`spoolbuddy-tag-written`,F),window.addEventListener(`spoolbuddy-tag-write-failed`,I),()=>{window.removeEventListener(`spoolbuddy-unknown-tag`,M),window.removeEventListener(`spoolbuddy-tag-matched`,N),window.removeEventListener(`spoolbuddy-tag-removed`,P),window.removeEventListener(`spoolbuddy-tag-written`,F),window.removeEventListener(`spoolbuddy-tag-write-failed`,I)}),[M,N,P,F,I]),(0,y.useEffect)(()=>{s(null),d(`idle`),p(``),l(``)},[i]);let L=async()=>{if(!(!o||!O)){d(`writing`),p(e(`spoolbuddy.writeTag.waiting`,`Waiting for SpoolBuddy...`));try{let e=await Dd.writeTag(O.device_id,o.id);if(e?.warnings?.length)for(let t of e.warnings)n(t,`warning`)}catch{d(`error`),p(e(`spoolbuddy.writeTag.queueFailed`,`Failed to queue write command`))}}},R=async()=>{if(O){try{await Dd.cancelWrite(O.device_id)}catch{}d(`idle`),p(``)}},z=async()=>{if(!(!o||!q2e(o))){h(!0),d(`idle`),p(``);try{C?await Z.linkTagToSpoolmanSpool(o.id,{tag_uid:``,tray_uuid:``}):await Z.linkTagToSpool(o.id,{tag_uid:``,tray_uuid:``,data_origin:`manual`}),await T(),s(null),d(`success`),p(e(`spoolbuddy.writeTag.untagSuccess`,`Tag removed from spool`)),setTimeout(()=>{d(`idle`),p(``)},2500)}catch{d(`error`),p(e(`spoolbuddy.writeTag.untagFailed`,`Failed to remove tag from spool`))}finally{h(!1)}}},B=(0,y.useCallback)(e=>{s(e),d(`idle`),p(``),T()},[T]),V=o&&k&&u!==`writing`&&u!==`success`;return(0,G.jsxs)(`div`,{className:`flex flex-col h-full`,children:[(0,G.jsx)(`div`,{className:`flex border-b border-bambu-dark-tertiary shrink-0`,children:[{key:`existing`,label:e(`spoolbuddy.writeTag.tabExisting`,`Existing Spool`)},{key:`new`,label:e(`spoolbuddy.writeTag.tabNew`,`New Spool`)},{key:`replace`,label:e(`spoolbuddy.writeTag.tabReplace`,`Replace Tag`)}].map(e=>(0,G.jsx)(`button`,{onClick:()=>a(e.key),className:`flex-1 py-3 text-sm font-medium transition-colors ${i===e.key?`text-bambu-green border-b-2 border-bambu-green bg-bambu-dark`:`text-zinc-400 hover:text-zinc-200 hover:bg-bambu-dark-tertiary`}`,children:e.label},e.key))}),(0,G.jsxs)(`div`,{className:`flex flex-1 overflow-hidden`,children:[(0,G.jsx)(`div`,{className:`flex-1 flex flex-col overflow-hidden border-r border-bambu-dark-tertiary`,children:i===`new`?(0,G.jsx)(Y2e,{currencySymbol:A,onCreated:B,selectedSpool:o,spoolmanMode:C,t:e}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`p-3 shrink-0`,children:(0,G.jsx)(`input`,{type:`text`,value:c,onChange:e=>l(e.target.value),placeholder:e(`spoolbuddy.writeTag.searchPlaceholder`,`Search by material, color, brand...`),className:`w-full px-3 py-2 bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded text-sm text-white placeholder-zinc-500 focus:outline-none focus:border-bambu-green`})}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto px-3 pb-3 space-y-2`,children:j.length===0?(0,G.jsx)(`div`,{className:`text-center text-zinc-500 py-8 text-sm`,children:i===`existing`?e(`spoolbuddy.writeTag.noUntaggedSpools`,`No spools without tags`):e(`spoolbuddy.writeTag.noTaggedSpools`,`No spools with tags`)}):j.map(e=>(0,G.jsx)(J2e,{spool:e,selected:o?.id===e.id,showTag:i===`replace`,onClick:()=>{s(e),d(`idle`),p(``)}},e.id))})]})}),(0,G.jsx)(`div`,{className:`w-[340px] flex flex-col items-center justify-center p-6 shrink-0`,children:(0,G.jsx)(X2e,{writeStatus:u,writeMessage:f,selectedSpool:o,tagOnReader:g,tagUid:v,deviceOnline:k,canWrite:!!V,isReplace:i===`replace`,canUntag:i===`replace`&&!!o&&q2e(o),untagging:m,onWrite:L,onUntag:z,onCancel:R,onRetry:()=>{d(`idle`),p(``)},t:e})})]})]})}function q2e(e){return!!(e.tag_uid||e.tray_uuid)}function J2e({spool:e,selected:t,showTag:n,onClick:r}){let i=Math.max(0,e.label_weight-e.weight_used),a=e.label_weight>0?Math.round(i/e.label_weight*100):0;return(0,G.jsxs)(`button`,{onClick:r,className:`w-full flex items-center gap-3 p-3 rounded-lg text-left transition-colors ${t?`bg-bambu-green/15 border border-bambu-green/50`:`bg-bambu-dark-secondary hover:bg-bambu-dark-tertiary border border-transparent`}`,children:[(0,G.jsx)(`div`,{className:`w-8 h-8 rounded-full shrink-0 border border-white/10`,style:e.rgba?kf(e.rgba):{backgroundColor:`#666`}}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`span`,{className:`text-sm font-medium text-white truncate`,children:[e.brand?`${e.brand} `:``,e.material,e.subtype?` ${e.subtype}`:``]}),(0,G.jsxs)(`span`,{className:`text-[10px] font-mono text-zinc-500 shrink-0`,children:[`#`,e.id]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-xs text-zinc-400`,children:[X9(e)&&(0,G.jsx)(`span`,{children:X9(e)}),(0,G.jsxs)(`span`,{children:[i,`g / `,e.label_weight,`g (`,a,`%)`]})]}),n&&e.tag_uid&&(0,G.jsx)(`div`,{className:`text-xs text-zinc-500 mt-0.5 font-mono`,children:e.tag_uid})]}),t&&(0,G.jsx)(`svg`,{className:`w-5 h-5 text-bambu-green shrink-0`,fill:`currentColor`,viewBox:`0 0 20 20`,children:(0,G.jsx)(`path`,{fillRule:`evenodd`,d:`M16.707 5.293a1 1 0 010 1.414l-8 8a1 1 0 01-1.414 0l-4-4a1 1 0 011.414-1.414L8 12.586l7.293-7.293a1 1 0 011.414 0z`,clipRule:`evenodd`})})]})}function Y2e({currencySymbol:e,onCreated:t,selectedSpool:n,spoolmanMode:r,t:i}){let{data:a=[]}=K({queryKey:[r?`spoolman-inventory-spools`:`inventory-spools`,`write-tag-form`],queryFn:()=>r?Z.getSpoolmanInventorySpools(!0):Z.getSpools(!0)}),{data:o}=K({queryKey:[`settings`],queryFn:Z.getSettings}),[s,c]=(0,y.useState)(`simple`),[l,u]=(0,y.useState)(`filament`),[d,f]=(0,y.useState)(f9),[p,m]=(0,y.useState)({}),[h,g]=(0,y.useState)(!1),[_,v]=(0,y.useState)(1),[b,x]=(0,y.useState)(!1),[S,C]=(0,y.useState)(null),[w,T]=(0,y.useState)(!1),[E,D]=(0,y.useState)(!1),[O,k]=(0,y.useState)([]),[A,j]=(0,y.useState)([]),[M,N]=(0,y.useState)([]),[P,F]=(0,y.useState)([]),[I,L]=(0,y.useState)([]),[R,z]=(0,y.useState)(``),[B,V]=(0,y.useState)([]),[ee,te]=(0,y.useState)([]),[ne,re]=(0,y.useState)(new Set),[ie,ae]=(0,y.useState)(new Set);(0,y.useEffect)(()=>{V($U())},[]),(0,y.useEffect)(()=>{let e=!1;return(async()=>{if(s===`full`){D(!0);try{let[t,n]=await Promise.allSettled([(async()=>(await Z.getCloudStatus()).is_authenticated?{connected:!0,presets:await Z.getFilamentPresets()}:{connected:!1,presets:[]})(),(async()=>(await Z.orcaCloudStatus()).connected?{connected:!0,presets:(await Z.orcaCloudListProfiles()).filament}:{connected:!1,presets:[]})()]);if(e)return;let r=t.status===`fulfilled`&&t.value.connected,i=n.status===`fulfilled`&&n.value.connected,a=t.status===`fulfilled`?t.value.presets:[],o=n.status===`fulfilled`?n.value.presets:[];T(r||i),k([...a,...o])}catch{e||T(!1)}finally{e||D(!1)}Z.getSpoolCatalog().then(t=>{e||F(t)}).catch(()=>void 0),Z.getColorCatalog().then(t=>{e||L(t)}).catch(()=>void 0),Z.getLocalPresets().then(t=>{e||j(t.filament)}).catch(()=>void 0),Z.getBuiltinFilaments().then(t=>{e||N(t)}).catch(()=>void 0);try{let t=await Z.getPrinters(),n=await Promise.all(t.map(e=>Z.getPrinterStatus(e.id).catch(()=>null))),r=[];for(let e=0;e<t.length;e++){let i=t[e],a=n[e],o=a?.connected??!1,s=[];o&&(s=await KU(i.id,a)),r.push({printer:{...i,connected:o},calibrations:s})}e||te(r)}catch{}}})(),()=>{e=!0}},[s]),(0,y.useEffect)(()=>{ee.length>0&&ae(new Set(ee.map(e=>String(e.printer.id))))},[ee]);let oe=(0,y.useMemo)(()=>YU(O,new Set,A,M),[O,A,M]),se=(0,y.useMemo)(()=>XU(d.slicer_filament,oe),[d.slicer_filament,oe]),H=(0,y.useMemo)(()=>{let e=JU(O,A),t=I.map(e=>e.manufacturer?.trim()).filter(e=>!!e);return Array.from(new Set([...e,...t])).sort((e,t)=>e.localeCompare(t))},[O,A,I]),ce=(0,y.useMemo)(()=>{let e=I.map(e=>e.material?.trim()).filter(e=>!!e);return Array.from(new Set([...zU,...e])).sort((e,t)=>e.localeCompare(t))},[I]),le=(0,y.useMemo)(()=>{let e=[];for(let t of I){let n=t.manufacturer?.trim(),r=t.material?.trim();n&&r&&e.push({brand:n,material:r})}for(let t of O){let n=qU(t.name);n.brand&&n.material&&e.push({brand:n.brand,material:n.material})}for(let t of A){let n=qU(t.name),r=t.filament_vendor?.trim()||n.brand,i=n.material;r&&i&&e.push({brand:r,material:i})}return e},[O,I,A]),ue=(0,y.useMemo)(()=>{let e=new Map;for(let t of le){let n=t.brand.toLowerCase(),r=t.material.toLowerCase();e.has(n)||e.set(n,new Set),e.get(n).add(r)}return e},[le]),de=(0,y.useMemo)(()=>{let e=new Map;for(let t of le){let n=t.brand.toLowerCase(),r=t.material.toLowerCase();e.has(r)||e.set(r,new Set),e.get(r).add(n)}return e},[le]),fe=(0,y.useMemo)(()=>ZU(H,d.brand),[H,d.brand]),pe=(0,y.useMemo)(()=>ZU(ce,d.material),[ce,d.material]),me=(0,y.useMemo)(()=>QU(fe,d.material,de),[fe,d.material,de]),he=(0,y.useMemo)(()=>QU(pe,d.brand,ue),[pe,d.brand,ue]),ge=(e,t)=>{f(n=>({...n,[e]:t})),p[e]&&m(t=>({...t,[e]:void 0}))},_e=e=>{V(t=>eW(e,t))},ve=async e=>{let t=r?Z.saveSpoolmanKProfiles:Z.saveSpoolKProfiles;if(ne.size===0){try{await t(e,[])}catch{}return}let n=[];for(let e of ne){let[t,r,i]=e.split(`:`),a=parseInt(t),o=parseInt(r),s=i===`null`?0:parseInt(i),c=ee.find(e=>e.printer.id===a);if(c){let e=c.calibrations.find(e=>e.cali_idx===o&&(e.extruder_id??0)===s);e&&n.push({printer_id:a,extruder:s,nozzle_diameter:e.nozzle_diameter||`0.4`,k_value:e.k_value,name:e.name||null,cali_idx:e.cali_idx,setting_id:e.setting_id||null})}}n.length>0&&await t(e,n)},ye=async()=>{C(null);let e=f1e(d,s===`simple`?!0:h);if(!e.isValid){m(e.errors),u(`filament`);return}let n=se?.displayName||R||null,a={material:d.material,subtype:d.subtype||null,brand:d.brand||null,color_name:d.color_name||null,rgba:d.rgba||null,extra_colors:d.extra_colors||null,effect_type:d.effect_type||null,label_weight:d.label_weight,core_weight:d.core_weight,core_weight_catalog_id:d.core_weight_catalog_id,weight_used:d.weight_used,slicer_filament:d.slicer_filament||null,slicer_filament_name:n,nozzle_temp_min:null,nozzle_temp_max:null,note:d.note||null,cost_per_kg:d.cost_per_kg,added_full:null,last_used:null,encode_time:null,tag_uid:null,tray_uuid:null,data_origin:null,tag_type:null,last_scale_weight:null,last_weighed_at:null,category:d.category.trim()||null,low_stock_threshold_pct:d.low_stock_threshold_pct};x(!0);try{if(_>1){let e=r?await Z.bulkCreateSpoolmanInventorySpools(a,_):await Z.bulkCreateSpools(a,_),n=r&&e&&typeof e==`object`&&`created`in e?e.created:e;for(let e of n)await ve(e.id);n.length>0&&t(n[0])}else{let e=r?await Z.createSpoolmanInventorySpool(a):await Z.createSpool(a);await ve(e.id),t(e)}}catch{C(i(`spoolbuddy.writeTag.createFailed`,`Failed to create spool`))}finally{x(!1)}},be=`#${(d.rgba||`808080FF`).slice(0,6)}`;return(0,G.jsxs)(`div`,{className:`p-3 space-y-3 overflow-y-auto h-full`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-2 py-2 bg-bambu-dark-secondary rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`span`,{className:`text-sm text-zinc-200`,children:i(`spoolbuddy.writeTag.viewMode`,`View`)}),(0,G.jsxs)(`div`,{className:`flex rounded-lg overflow-hidden border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>c(`simple`),className:`px-3 py-1.5 text-xs font-medium ${s===`simple`?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark text-zinc-400`}`,children:i(`spoolbuddy.writeTag.simpleView`,`Simple`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>c(`full`),className:`px-3 py-1.5 text-xs font-medium ${s===`full`?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark text-zinc-400`}`,children:i(`spoolbuddy.writeTag.fullView`,`Full`)})]})]}),s===`simple`?n?(0,G.jsxs)(`div`,{className:`flex flex-col items-center justify-center h-full p-6 text-center bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg`,children:[(0,G.jsx)(`div`,{className:`w-12 h-12 rounded-full mb-4 border border-white/10`,style:n.rgba?kf(n.rgba):{backgroundColor:`#666`}}),(0,G.jsxs)(`p`,{className:`text-white font-medium`,children:[n.brand?`${n.brand} `:``,n.material]}),X9(n)&&(0,G.jsx)(`p`,{className:`text-zinc-400 text-sm`,children:X9(n)}),(0,G.jsxs)(`p`,{className:`text-zinc-500 text-xs mt-1`,children:[n.label_weight,`g`]}),(0,G.jsx)(`p`,{className:`text-bambu-green text-sm mt-4`,children:i(`spoolbuddy.writeTag.spoolCreated`,`Spool created! Ready to write.`)})]}):(0,G.jsxs)(`div`,{className:`p-4 space-y-4 overflow-y-auto bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-zinc-400 mb-1`,children:i(`spoolbuddy.writeTag.material`,`Material`)}),(0,G.jsx)(`select`,{value:d.material,onChange:e=>ge(`material`,e.target.value),className:`w-full px-3 py-2 bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded text-sm text-white focus:outline-none focus:border-bambu-green`,children:G2e.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))})]}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-zinc-400 mb-1`,children:i(`spoolbuddy.writeTag.colorName`,`Color Name`)}),(0,G.jsx)(`input`,{type:`text`,value:d.color_name,onChange:e=>ge(`color_name`,e.target.value),placeholder:`Jade White`,className:`w-full px-3 py-2 bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded text-sm text-white placeholder-zinc-500 focus:outline-none focus:border-bambu-green`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-zinc-400 mb-1`,children:i(`spoolbuddy.writeTag.color`,`Color`)}),(0,G.jsx)(`input`,{type:`color`,value:be,onChange:e=>ge(`rgba`,e.target.value.replace(`#`,``).toUpperCase()+`FF`),className:`w-10 h-9 bg-transparent border border-bambu-dark-tertiary rounded cursor-pointer`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-zinc-400 mb-1`,children:i(`spoolbuddy.writeTag.brand`,`Brand`)}),(0,G.jsx)(`input`,{type:`text`,value:d.brand,onChange:e=>ge(`brand`,e.target.value),placeholder:`Polymaker`,className:`w-full px-3 py-2 bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded text-sm text-white placeholder-zinc-500 focus:outline-none focus:border-bambu-green`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-zinc-400 mb-1`,children:i(`spoolbuddy.writeTag.weight`,`Weight (g)`)}),(0,G.jsx)(`input`,{type:`number`,value:d.label_weight,onChange:e=>ge(`label_weight`,parseInt(e.target.value)||0),min:0,max:1e4,className:`w-full px-3 py-2 bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded text-sm text-white focus:outline-none focus:border-bambu-green`})]}),(0,G.jsx)(`button`,{onClick:ye,disabled:b||!d.material,className:`w-full py-2.5 bg-bambu-green hover:bg-bambu-green/80 disabled:opacity-50 disabled:cursor-not-allowed text-white text-sm font-medium rounded transition-colors`,children:b?i(`spoolbuddy.writeTag.creating`,`Creating...`):i(`spoolbuddy.writeTag.createSpool`,`Create Spool`)})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-2 py-2 bg-bambu-dark-secondary rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`span`,{className:`text-sm text-zinc-200`,children:i(`inventory.quickAdd`,`Quick Add`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>g(e=>!e),className:`relative inline-flex h-6 w-11 items-center rounded-full transition-colors ${h?`bg-bambu-green`:`bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(`span`,{className:`inline-block h-4.5 w-4.5 rounded-full bg-white transition-transform ${h?`translate-x-6`:`translate-x-1`}`})})]}),(0,G.jsxs)(`div`,{className:`flex border border-bambu-dark-tertiary rounded-lg overflow-hidden`,children:[(0,G.jsx)(`button`,{onClick:()=>u(`filament`),className:`flex-1 py-2.5 text-sm font-medium ${l===`filament`?`bg-bambu-green/15 text-bambu-green`:`bg-bambu-dark-secondary text-zinc-400`}`,children:i(`inventory.filamentInfoTab`,`Filament`)}),!h&&(0,G.jsx)(`button`,{onClick:()=>u(`pa-profile`),className:`flex-1 py-2.5 text-sm font-medium ${l===`pa-profile`?`bg-bambu-green/15 text-bambu-green`:`bg-bambu-dark-secondary text-zinc-400`}`,children:i(`inventory.paProfileTab`,`PA Profile`)})]}),(0,G.jsx)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg p-3`,children:l===`filament`?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(g1e,{formData:d,updateField:ge,cloudAuthenticated:w,loadingCloudPresets:E,presetInputValue:R,setPresetInputValue:z,selectedPresetOption:se,filamentOptions:oe,availableBrands:fe,availableMaterials:pe,suggestedBrands:me,suggestedMaterials:he,quickAdd:h,detailsRequired:!h,quantity:_,onQuantityChange:v,errors:p}),(0,G.jsx)(v1e,{formData:d,updateField:ge,recentColors:B,onColorUsed:_e,catalogColors:I}),(0,G.jsx)(b1e,{formData:d,updateField:ge,spoolCatalog:P,currencySymbol:e,availableCategories:Array.from(new Set(a.map(e=>e.category?.trim()).filter(e=>!!e))).sort((e,t)=>e.localeCompare(t)),globalLowStockThreshold:o?.low_stock_threshold??20})]}):(0,G.jsx)(W2e,{formData:d,updateField:ge,printersWithCalibrations:ee,selectedProfiles:ne,setSelectedProfiles:re,expandedPrinters:ie,setExpandedPrinters:ae})})]}),S&&(0,G.jsx)(`div`,{className:`text-sm text-red-400 bg-red-900/20 border border-red-900/40 rounded-lg px-3 py-2`,children:S}),s===`full`&&(0,G.jsx)(`button`,{onClick:ye,disabled:b,className:`w-full py-3 bg-bambu-green hover:bg-bambu-green/80 disabled:opacity-50 disabled:cursor-not-allowed text-white text-sm font-medium rounded transition-colors`,children:b?i(`spoolbuddy.writeTag.creating`,`Creating...`):i(`spoolbuddy.writeTag.createSpool`,`Create Spool`)}),s===`full`&&n&&(0,G.jsxs)(`div`,{className:`flex flex-col items-center justify-center p-4 text-center bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg`,children:[(0,G.jsx)(`div`,{className:`w-12 h-12 rounded-full mb-4 border border-white/10`,style:n.rgba?kf(n.rgba):{backgroundColor:`#666`}}),(0,G.jsxs)(`p`,{className:`text-white font-medium`,children:[n.brand?`${n.brand} `:``,n.material]}),X9(n)&&(0,G.jsx)(`p`,{className:`text-zinc-400 text-sm`,children:X9(n)}),(0,G.jsxs)(`p`,{className:`text-zinc-500 text-xs mt-1`,children:[n.label_weight,`g`]}),(0,G.jsx)(`p`,{className:`text-bambu-green text-sm mt-4`,children:i(`spoolbuddy.writeTag.spoolCreated`,`Spool created! Ready to write.`)})]})]})}function X2e({writeStatus:e,writeMessage:t,selectedSpool:n,tagOnReader:r,tagUid:i,deviceOnline:a,canWrite:o,isReplace:s,canUntag:c,untagging:l,onWrite:u,onUntag:d,onCancel:f,onRetry:p,t:m}){if(e===`success`)return(0,G.jsxs)(`div`,{className:`flex flex-col items-center text-center space-y-4`,children:[(0,G.jsx)(`div`,{className:`w-16 h-16 rounded-full bg-green-500/20 flex items-center justify-center`,children:(0,G.jsx)(`svg`,{className:`w-8 h-8 text-green-400`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:2,d:`M5 13l4 4L19 7`})})}),(0,G.jsx)(`p`,{className:`text-green-400 font-medium`,children:t}),n&&(0,G.jsxs)(`p`,{className:`text-zinc-400 text-sm`,children:[n.brand?`${n.brand} `:``,n.material,n.subtype?` ${n.subtype}`:``,X9(n)?` - ${X9(n)}`:``]})]});if(e===`error`)return(0,G.jsxs)(`div`,{className:`flex flex-col items-center text-center space-y-4`,children:[(0,G.jsx)(`div`,{className:`w-16 h-16 rounded-full bg-red-500/20 flex items-center justify-center`,children:(0,G.jsx)(`svg`,{className:`w-8 h-8 text-red-400`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:2,d:`M6 18L18 6M6 6l12 12`})})}),(0,G.jsx)(`p`,{className:`text-red-400 font-medium`,children:t}),(0,G.jsx)(`button`,{onClick:p,className:`px-4 py-2 bg-bambu-dark-tertiary hover:bg-bambu-dark-secondary text-white text-sm rounded transition-colors`,children:m(`spoolbuddy.writeTag.tryAgain`,`Try Again`)})]});if(e===`writing`)return(0,G.jsxs)(`div`,{className:`flex flex-col items-center text-center space-y-4`,children:[(0,G.jsxs)(`div`,{className:`relative w-16 h-16`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 rounded-full border-2 border-bambu-green/30 animate-ping`}),(0,G.jsx)(`div`,{className:`absolute inset-2 rounded-full border-2 border-bambu-green/50 animate-pulse`}),(0,G.jsx)(`div`,{className:`absolute inset-0 flex items-center justify-center`,children:(0,G.jsx)(Z9,{className:`w-8 h-8 text-bambu-green`})})]}),(0,G.jsx)(`p`,{className:`text-bambu-green font-medium`,children:m(`spoolbuddy.writeTag.writing`,`Writing tag...`)}),(0,G.jsx)(`p`,{className:`text-zinc-500 text-xs`,children:t}),(0,G.jsx)(`button`,{onClick:f,className:`px-4 py-2 bg-bambu-dark-tertiary hover:bg-bambu-dark-secondary text-zinc-400 text-sm rounded transition-colors`,children:m(`spoolbuddy.writeTag.cancel`,`Cancel`)})]});if(!a)return(0,G.jsxs)(`div`,{className:`flex flex-col items-center text-center space-y-3`,children:[(0,G.jsx)(Z9,{className:`w-12 h-12 text-zinc-600`}),(0,G.jsx)(`p`,{className:`text-zinc-500 text-sm`,children:m(`spoolbuddy.writeTag.deviceOffline`,`SpoolBuddy is offline`)})]});if(!n)return(0,G.jsxs)(`div`,{className:`flex flex-col items-center text-center space-y-3`,children:[(0,G.jsx)(Z9,{className:`w-12 h-12 text-zinc-600`}),(0,G.jsx)(`p`,{className:`text-zinc-400 text-sm`,children:m(`spoolbuddy.writeTag.selectSpool`,`Select a spool, then place a blank NTAG on the reader`)})]});let h=n.rgba?kf(n.rgba):{backgroundColor:`#666`};return(0,G.jsxs)(`div`,{className:`flex flex-col items-center text-center space-y-4 w-full`,children:[(0,G.jsx)(`div`,{className:`relative w-16 h-16`,children:r?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`absolute inset-0 rounded-full bg-bambu-green/10`}),(0,G.jsx)(`div`,{className:`absolute inset-0 flex items-center justify-center`,children:(0,G.jsx)(Z9,{className:`w-8 h-8 text-bambu-green`})})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`absolute inset-0 rounded-full border-2 border-zinc-600 animate-pulse`}),(0,G.jsx)(`div`,{className:`absolute inset-0 flex items-center justify-center`,children:(0,G.jsx)(Z9,{className:`w-8 h-8 text-zinc-500`})})]})}),r?(0,G.jsxs)(`div`,{className:`space-y-1`,children:[(0,G.jsx)(`p`,{className:`text-bambu-green text-sm font-medium`,children:m(`spoolbuddy.writeTag.tagReady`,`Tag detected — ready to write`)}),i&&(0,G.jsx)(`p`,{className:`text-zinc-500 text-xs font-mono`,children:i})]}):(0,G.jsx)(`p`,{className:`text-zinc-400 text-sm`,children:m(`spoolbuddy.writeTag.placeTag`,`Place an NTAG on the reader`)}),(0,G.jsxs)(`div`,{className:`w-full bg-bambu-dark-secondary rounded-lg p-3 space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-8 h-8 rounded-full border border-white/10 shrink-0`,style:h}),(0,G.jsxs)(`div`,{className:`text-left min-w-0`,children:[(0,G.jsxs)(`p`,{className:`text-white text-sm font-medium truncate`,children:[n.brand?`${n.brand} `:``,n.material]}),X9(n)&&(0,G.jsx)(`p`,{className:`text-zinc-400 text-xs`,children:X9(n)})]})]}),(0,G.jsxs)(`div`,{className:`text-xs text-zinc-500`,children:[n.label_weight,`g`]})]}),s&&n.tag_uid&&(0,G.jsx)(`p`,{className:`text-yellow-500/80 text-xs`,children:m(`spoolbuddy.writeTag.replaceWarning`,`Old tag will be unlinked. New tag will replace it.`)}),(0,G.jsx)(`button`,{onClick:u,disabled:!o,className:`w-full py-3 bg-bambu-green hover:bg-bambu-green/80 disabled:opacity-40 disabled:cursor-not-allowed text-white font-medium rounded-lg transition-colors text-sm`,children:s?m(`spoolbuddy.writeTag.replaceTag`,`Replace Tag`):m(`spoolbuddy.writeTag.writeTag`,`Write Tag`)}),s&&c&&(0,G.jsx)(`button`,{onClick:d,disabled:l,className:`w-full py-2.5 bg-bambu-dark-tertiary hover:bg-bambu-dark-secondary disabled:opacity-40 disabled:cursor-not-allowed text-zinc-200 rounded-lg transition-colors text-sm`,children:l?m(`spoolbuddy.writeTag.untagging`,`Removing tag...`):m(`spoolbuddy.writeTag.untagSpool`,`Untag Selected Spool`)})]})}function Z9({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 24 24`,fill:`none`,stroke:`currentColor`,strokeWidth:1.5,children:[(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,d:`M8.288 15.038a5.25 5.25 0 017.424 0M5.106 11.856c3.807-3.808 9.98-3.808 13.788 0M1.924 8.674c5.565-5.565 14.587-5.565 20.152 0`}),(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,d:`M12.53 18.22l-.53.53-.53-.53a.75.75 0 011.06 0z`})]})}var Z2e=`spoolbuddy-default-core-weight`;function Q2e(){try{let e=localStorage.getItem(Z2e);if(e){let t=parseInt(e,10);if(t>=0&&t<=500)return t}}catch{}return 250}function $2e({spool:e,liveScaleWeight:t,persistedGrossWeight:n,onClose:r,onSyncWeight:i,onAssignToAms:a,isAssigned:o,onUnassignFromAms:s,className:c}){let{t:l}=U(),[u,d]=(0,y.useState)(!1),[f,p]=(0,y.useState)(!1),[m,h]=(0,y.useState)(null),{data:g}=K({queryKey:[`spool-k-profiles`,e.id],queryFn:()=>Z.getSpoolKProfiles(e.id),enabled:!e.k_profiles||e.k_profiles.length===0,staleTime:300*1e3}),_=e.k_profiles&&e.k_profiles.length>0?e.k_profiles:g,v=Df(e.rgba),b=Ef(e.color_name,e.rgba,e.color_name_is_synthesized),x=e.core_weight&&e.core_weight>0?e.core_weight:Q2e(),S=t===null?null:Math.round(Math.max(0,t)),C=m??(n===void 0?S:n===null?null:Math.round(Math.max(0,n))),w=Math.round(Math.max(0,(e.label_weight||0)-(e.weight_used||0))),T=S!==null&&S>=10?Math.round(Math.max(0,S-x)):w,E=Math.round(e.label_weight||1e3),D=E>0?Math.min(100,Math.round(T/E*100)):null,O=D===null?`#808080`:D>50?`#22c55e`:D>20?`#eab308`:`#ef4444`,k=Math.max(0,(e.label_weight||0)-(e.weight_used||0))+x,A=S===null?null:S-k,j=A===null?null:Math.abs(A)<=50,M=C??Math.round(k),N=e.nozzle_temp_min!=null&&e.nozzle_temp_max!=null?`${e.nozzle_temp_min}-${e.nozzle_temp_max}\u00B0C`:null,P=e.slicer_filament_name||e.slicer_filament||null,F=e.note?.trim()||null,I=_&&_.length>0?Array.from(new Set(_.map(e=>e.k_value.toFixed(3)))).join(`, `):null,L=async()=>{if(t===null)return;let n=Math.round(Math.max(0,t));d(!0);try{await Dd.updateSpoolWeight(e.id,n),h(n),p(!0),i?.(),setTimeout(()=>p(!1),3e3)}catch(e){console.error(`Failed to sync weight:`,e)}finally{d(!1)}};return(0,G.jsxs)(`div`,{className:`flex flex-col items-center space-y-4 max-w-md ${c??``}`,children:[(0,G.jsxs)(`div`,{className:`flex items-start gap-5`,children:[(0,G.jsxs)(`div`,{className:`relative shrink-0`,children:[(0,G.jsx)(W9,{color:v,isEmpty:!1,size:100}),D!==null&&(0,G.jsxs)(`div`,{className:`absolute -bottom-2 -right-2 px-2 py-0.5 rounded-full text-xs font-bold text-white shadow-lg`,style:{backgroundColor:O},children:[D,`%`]})]}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0 pt-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-zinc-100`,children:b||l(`spoolbuddy.spool.unknownColor`)}),(0,G.jsxs)(`span`,{className:`text-xs font-mono text-zinc-500 shrink-0`,children:[`#`,e.id]})]}),(0,G.jsxs)(`p`,{className:`text-sm text-zinc-400`,children:[e.brand,` • `,e.material,e.subtype&&` ${e.subtype}`]}),(0,G.jsxs)(`div`,{className:`mt-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-baseline gap-2`,children:[(0,G.jsxs)(`span`,{className:`text-3xl font-bold font-mono text-zinc-100`,children:[T,`g`]}),(0,G.jsxs)(`span`,{className:`text-sm text-zinc-500`,children:[`/ `,E,`g`]})]}),(0,G.jsx)(`p`,{className:`text-xs text-zinc-500 mt-0.5`,children:l(`spoolbuddy.spool.remaining`,`Remaining`)}),(0,G.jsx)(`div`,{className:`mt-2 max-w-xs`,children:(0,G.jsx)(`div`,{className:`h-2 bg-zinc-700 rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full transition-all duration-500`,style:{width:`${D??0}%`,backgroundColor:O}})})})]})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-x-6 gap-y-2 text-sm bg-zinc-800 rounded-lg p-4 w-full`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:l(`spoolbuddy.dashboard.grossWeight`,`Gross weight`)}),(0,G.jsxs)(`span`,{className:`font-mono text-zinc-300`,children:[M,`g`]})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:l(`spoolbuddy.spool.coreWeight`,`Core`)}),(0,G.jsxs)(`span`,{className:`font-mono text-zinc-300`,children:[x,`g`]})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:l(`spoolbuddy.dashboard.spoolSize`,`Spool size`)}),(0,G.jsxs)(`span`,{className:`font-mono text-zinc-300`,children:[E,`g`]})]}),(0,G.jsxs)(`div`,{className:`flex justify-between items-center`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:l(`spoolbuddy.spool.scaleWeight`,`Scale`)}),S===null?(0,G.jsx)(`span`,{className:`text-zinc-500`,children:`—`}):(0,G.jsxs)(`span`,{className:`flex items-center gap-1 font-mono ${j?`text-green-500`:`text-yellow-500`}`,children:[S,`g`,j?(0,G.jsx)(fs,{className:`w-3.5 h-3.5`}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Iu,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`button`,{onClick:L,className:`p-1 hover:bg-green-500/20 rounded transition-colors text-green-500`,title:l(`spoolbuddy.dashboard.syncWeight`,`Sync Weight`),children:(0,G.jsx)(Vl,{className:`w-4 h-4`})})]})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-between items-center`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:l(`spoolbuddy.dashboard.tagId`,`Tag`)}),(0,G.jsx)(`span`,{className:`font-mono text-xs text-zinc-400 truncate max-w-[120px]`,title:e.tag_uid||``,children:e.tag_uid?e.tag_uid.slice(-8):`—`})]}),N&&(0,G.jsxs)(`div`,{className:`flex justify-between items-center`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:l(`spoolbuddy.inventory.nozzleTemp`,`Nozzle`)}),(0,G.jsx)(`span`,{className:`font-mono text-zinc-300`,children:N})]}),e.cost_per_kg!=null&&e.cost_per_kg>0&&(0,G.jsxs)(`div`,{className:`flex justify-between items-center`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:l(`spoolbuddy.inventory.costPerKg`,`Cost/kg`)}),(0,G.jsxs)(`span`,{className:`font-mono text-zinc-300`,children:[e.cost_per_kg.toFixed(2),`/kg`]})]}),I&&(0,G.jsxs)(`div`,{className:`flex justify-between items-center`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:l(`spoolbuddy.inventory.kProfiles`,`K-Profile`)}),(0,G.jsx)(`span`,{className:`font-mono text-zinc-300 truncate max-w-[220px] text-right`,title:I,children:I})]}),P&&(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-xs text-zinc-500 mb-1`,children:l(`spoolbuddy.inventory.slicerFilament`,`Slicer Filament`)}),(0,G.jsx)(`p`,{className:`text-sm text-zinc-300 whitespace-pre-wrap break-words`,children:P})]}),F&&(0,G.jsxs)(`div`,{className:`col-span-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-zinc-500 mb-1`,children:l(`spoolbuddy.inventory.note`,`Note`)}),(0,G.jsx)(`p`,{className:`text-sm leading-5 text-zinc-300 whitespace-pre-wrap break-words max-h-[3.75rem] overflow-y-auto pr-1`,children:F})]})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 justify-center`,children:[a&&(0,G.jsx)(`button`,{onClick:o?void 0:a,disabled:!!o,className:`px-5 py-2.5 rounded-lg text-sm font-medium bg-green-600 text-white hover:bg-green-700 transition-colors min-h-[44px] disabled:opacity-50 disabled:cursor-not-allowed`,children:l(`spoolbuddy.modal.assignToAms`,`Assign to AMS`)}),s&&(0,G.jsxs)(`button`,{onClick:s,className:`px-5 py-2.5 rounded-lg text-sm font-medium bg-red-600/20 text-red-400 hover:bg-red-600/30 transition-colors min-h-[44px]`,children:[(0,G.jsx)(zu,{className:`w-4 h-4 inline mr-1`}),l(`inventory.unassignSpool`)]}),(0,G.jsx)(`button`,{onClick:L,disabled:t===null||u,className:`px-5 py-2.5 rounded-lg text-sm font-medium transition-colors min-h-[44px] ${f?`bg-green-600/20 text-green-400`:a?`bg-zinc-700 text-zinc-300 hover:bg-zinc-600 disabled:opacity-40 disabled:cursor-not-allowed`:`bg-green-600 text-white hover:bg-green-700 disabled:opacity-40 disabled:cursor-not-allowed`}`,children:u?`...`:f?l(`spoolbuddy.dashboard.weightSynced`,`Synced!`):l(`spoolbuddy.dashboard.syncWeight`,`Sync Weight`)}),r&&(0,G.jsx)(`button`,{onClick:r,className:`px-5 py-2.5 rounded-lg text-sm font-medium bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors min-h-[44px]`,children:l(`spoolbuddy.dashboard.close`,`Close`)})]})]})}function e4e(e){return Df(e.rgba)}function t4e(e){return Math.max(0,e.label_weight-e.weight_used)}function n4e(e){return e.label_weight<=0?0:Math.max(0,Math.min(100,(e.label_weight-e.weight_used)/e.label_weight*100))}function r4e(e){let t=[e.material];return e.subtype&&t.push(e.subtype),t.join(` `)}function i4e(e){let t=e.ams_id===254||e.ams_id===255,n=!t&&e.ams_id>=128;return Op(e.ams_id,e.tray_id,n,t)}function a4e({color:e,size:t=56}){return(0,G.jsxs)(`svg`,{width:t,height:t,viewBox:`0 0 56 56`,children:[(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`26`,fill:e}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`20`,fill:e,style:{filter:`brightness(0.85)`}}),(0,G.jsx)(`ellipse`,{cx:`20`,cy:`20`,rx:`6`,ry:`4`,fill:`white`,opacity:`0.3`}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`8`,fill:`#2d2d2d`}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`5`,fill:`#1a1a1a`})]})}function o4e(){let{sbState:e,selectedPrinterId:t}=lr(),{t:n}=U(),r=Mf(),{showToast:i}=Gd(),a=co(),[o,s]=(0,y.useState)(``),[c,l]=(0,y.useState)(`all`),[u,d]=(0,y.useState)(null),[f,p]=(0,y.useState)(!1),{data:m}=K({queryKey:[`spoolman-settings`],queryFn:Z.getSpoolmanSettings,staleTime:300*1e3}),h=m?.spoolman_enabled===`true`&&!!m?.spoolman_url,{data:g=[],isLoading:_,refetch:v}=K({queryKey:h?[`spoolman-inventory-spools`]:[`inventory-spools`],queryFn:()=>h?Z.getSpoolmanInventorySpools(!1):Z.getSpools(!1),enabled:m!==void 0,refetchInterval:3e4}),{data:b=[]}=K({queryKey:[`spool-assignments`],queryFn:()=>Z.getAssignments(),refetchInterval:3e4,enabled:!h}),{data:x=[]}=K({queryKey:[`spoolman-slot-assignments`],queryFn:()=>Z.getSpoolmanSlotAssignments(),refetchInterval:3e4,enabled:h}),S=q({mutationFn:e=>Z.unassignSpoolmanSlot(e),onSuccess:()=>{a.invalidateQueries({queryKey:[`spoolman-slot-assignments`]}),a.invalidateQueries({queryKey:[`spoolman-inventory-spools`]})},onError:()=>i(n(`inventory.unassignFailed`,`Failed to unassign spool`),`error`)}),C=(0,y.useMemo)(()=>{if(h){let e={};return x.forEach(t=>{e[t.spoolman_spool_id]={ams_id:t.ams_id,tray_id:t.tray_id}}),e}let e={};return b.forEach(t=>{e[t.spool_id]={ams_id:t.ams_id,tray_id:t.tray_id,printer_name:t.printer_name}}),e},[h,b,x]),w=(0,y.useMemo)(()=>g.filter(e=>!e.archived_at),[g]),T=(0,y.useMemo)(()=>new Set(Object.keys(C).map(Number)),[C]),E=(0,y.useMemo)(()=>w.filter(e=>T.has(e.id)).length,[w,T]),D=(0,y.useMemo)(()=>{let e=new Set;return w.forEach(t=>e.add(t.material)),Array.from(e).sort()},[w]),O=(0,y.useMemo)(()=>{let e=w;return c===`in_ams`?e=e.filter(e=>T.has(e.id)):c!==`all`&&(e=e.filter(e=>e.material===c)),e=DU(e,o.trim()),[...e].sort((e,t)=>{let n=+!T.has(e.id),r=+!T.has(t.id);return n===r?new Date(t.updated_at).getTime()-new Date(e.updated_at).getTime():n-r})},[w,c,o,T,r]);return(0,G.jsxs)(`div`,{className:`h-full flex flex-col`,children:[(0,G.jsxs)(`div`,{className:`px-3 pt-3 pb-2 space-y-2.5`,children:[(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-white/40`}),(0,G.jsx)(`input`,{type:`text`,value:o,onChange:e=>s(e.target.value),placeholder:n(`spoolbuddy.inventory.searchPlaceholder`,`Search spools...`),className:`w-full pl-9 pr-8 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-sm text-white placeholder-white/30 focus:outline-none focus:border-bambu-green`}),o&&(0,G.jsx)(`button`,{onClick:()=>s(``),className:`absolute right-2 top-1/2 -translate-y-1/2 text-white/40 hover:text-white/60`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}),(0,G.jsxs)(`div`,{className:`flex gap-1.5 overflow-x-auto no-scrollbar`,children:[(0,G.jsx)(Q9,{active:c===`all`,onClick:()=>l(`all`),label:`${n(`spoolbuddy.inventory.all`,`All`)} (${w.length})`,green:!0}),E>0&&(0,G.jsx)(Q9,{active:c===`in_ams`,onClick:()=>l(`in_ams`),label:`${n(`spoolbuddy.inventory.inAms`,`In AMS`)} (${E})`}),D.map(e=>(0,G.jsx)(Q9,{active:c===e,onClick:()=>l(c===e?`all`:e),label:e},e))]})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto px-3 pb-3`,children:_?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-16`,children:(0,G.jsx)(`div`,{className:`w-8 h-8 border-2 border-bambu-green border-t-transparent rounded-full animate-spin`})}):O.length===0?(0,G.jsxs)(`div`,{className:`flex flex-col items-center justify-center py-16 text-white/30`,children:[(0,G.jsx)(Sl,{className:`w-12 h-12 mb-3`}),(0,G.jsx)(`p`,{className:`text-sm`,children:o||c!==`all`?n(`spoolbuddy.inventory.noResults`,`No spools match your filters`):n(`spoolbuddy.inventory.empty`,`No spools in inventory`)})]}):(0,G.jsx)(`div`,{className:`grid grid-cols-[repeat(auto-fill,minmax(130px,1fr))] gap-2`,children:O.map(e=>(0,G.jsx)(s4e,{spool:e,assignment:C[e.id],onClick:()=>d(e.id)},e.id))})}),u!=null&&(()=>{let n=g.find(e=>e.id===u);return n?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(c4e,{spool:n,assignment:C[n.id],sbState:e,onSyncWeight:()=>{v()},onAssignToAms:()=>p(!0),onUnassignFromAms:h&&C[n.id]?()=>S.mutate(n.id):void 0,onClose:()=>{d(null),p(!1)}}),(0,G.jsx)(g2e,{isOpen:f,onClose:()=>p(!1),spool:n,printerId:t,spoolmanMode:h})]}):null})()]})}function Q9({active:e,onClick:t,label:n,green:r}){return(0,G.jsx)(`button`,{onClick:t,className:`px-4 py-1.5 rounded-full text-sm font-medium border whitespace-nowrap shrink-0 transition-colors ${e?r?`bg-bambu-green/20 text-bambu-green border-bambu-green/50`:`bg-white/10 text-white border-white/20`:`bg-transparent text-white/40 border-bambu-dark-tertiary hover:text-white/60`}`,children:n})}function s4e({spool:e,assignment:t,onClick:n}){let r=e4e(e),i=n4e(e),a=t4e(e),o=Ef(e.color_name,e.rgba,e.color_name_is_synthesized);return(0,G.jsxs)(`button`,{onClick:n,className:`bg-bambu-dark-secondary rounded-xl p-3 flex flex-col items-center text-center gap-1.5 border border-transparent hover:border-bambu-green/50 transition-colors`,children:[(0,G.jsx)(a4e,{color:r,size:56}),(0,G.jsx)(`p`,{className:`text-xs font-semibold text-white leading-tight truncate w-full`,children:r4e(e)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 min-w-0 max-w-full`,children:[(0,G.jsx)(`span`,{className:`w-2.5 h-2.5 rounded-full shrink-0 border border-white/10`,style:kf(e.rgba)}),(0,G.jsx)(`span`,{className:`text-[11px] text-white/50 truncate`,children:o||`-`})]}),(0,G.jsxs)(`div`,{className:`w-full space-y-0.5`,children:[(0,G.jsx)(`div`,{className:`h-1.5 bg-bambu-dark-tertiary rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full ${i>50?`bg-bambu-green`:i>20?`bg-yellow-500`:`bg-red-500`}`,style:{width:`${Math.min(i,100)}%`}})}),(0,G.jsxs)(`p`,{className:`text-[11px] text-white/40`,children:[Math.round(a),`g (`,Math.round(i),`%)`]})]}),t&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded text-[10px] font-bold bg-bambu-green/20 text-bambu-green`,children:i4e(t)})]})}function c4e({spool:e,assignment:t,sbState:n,onSyncWeight:r,onAssignToAms:i,onUnassignFromAms:a,onClose:o}){let s=n.deviceOnline&&n.weight!==null?Math.round(n.weight):null,c=e.last_scale_weight==null?null:Math.round(e.last_scale_weight);return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 bg-black/70 flex items-center justify-center p-4`,onClick:o,children:(0,G.jsx)(`div`,{className:`w-full max-w-md bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-2xl p-4 overflow-y-auto max-h-[90vh]`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(`div`,{className:`space-y-3`,children:[t&&(0,G.jsxs)(`div`,{className:`flex items-center justify-center gap-2`,children:[(0,G.jsx)(`span`,{className:`px-2.5 py-1 rounded-md text-xs font-bold bg-bambu-green/20 text-bambu-green`,children:i4e(t)}),t.printer_name&&(0,G.jsx)(`span`,{className:`text-xs text-zinc-400`,children:t.printer_name})]}),(0,G.jsx)(`div`,{className:`flex justify-center`,children:(0,G.jsx)($2e,{spool:e,liveScaleWeight:s,persistedGrossWeight:c,onSyncWeight:r,onAssignToAms:i,isAssigned:!!t,onUnassignFromAms:a,onClose:o,className:`max-w-md`})})]})})})}var l4e=class extends y.Component{state={error:null,errorInfo:null};static getDerivedStateFromError(e){return{error:e}}componentDidCatch(e,t){this.setState({errorInfo:t}),console.error(`React crash:`,e,t)}render(){return this.state.error?(0,G.jsxs)(`div`,{style:{padding:24,color:`#ef4444`,backgroundColor:`#18181b`,minHeight:`100vh`,fontFamily:`monospace`},children:[(0,G.jsx)(`h1`,{style:{fontSize:20,marginBottom:12},children:`UI Crash`}),(0,G.jsx)(`pre`,{style:{whiteSpace:`pre-wrap`,fontSize:14},children:this.state.error.message}),(0,G.jsx)(`pre`,{style:{whiteSpace:`pre-wrap`,fontSize:12,color:`#a1a1aa`,marginTop:12},children:this.state.error.stack}),(0,G.jsx)(`button`,{onClick:()=>{this.setState({error:null,errorInfo:null})},style:{marginTop:16,padding:`8px 16px`,backgroundColor:`#3b82f6`,color:`#fff`,border:`none`,borderRadius:8,cursor:`pointer`},children:`Retry`})]}):this.props.children}},u4e=new ao({defaultOptions:{queries:{staleTime:1e3*60,retry:1}}});function d4e(){return T$e(),null}function f4e({children:e}){return O0e(),N0e(),(0,G.jsx)(G.Fragment,{children:e})}function p4e({children:e}){let{authEnabled:t,loading:n,user:r}=jd(),i=rr();return n?(0,G.jsx)(`div`,{className:`min-h-screen flex items-center justify-center`,children:`Loading...`}):t&&!r?(0,G.jsx)(Fr,{to:`/login`,replace:!0,state:{from:i}}):(0,G.jsx)(G.Fragment,{children:e})}function $9({permission:e,children:t}){let{authEnabled:n,loading:r,user:i,hasPermission:a}=jd(),o=rr();return r?(0,G.jsx)(`div`,{className:`min-h-screen flex items-center justify-center`,children:`Loading...`}):n?i?a(e)?(0,G.jsx)(G.Fragment,{children:t}):(0,G.jsx)(Fr,{to:`/`,replace:!0}):(0,G.jsx)(Fr,{to:`/login`,replace:!0,state:{from:o}}):(0,G.jsx)(G.Fragment,{children:t})}function m4e({children:e}){let{authEnabled:t,loading:n}=jd();return n?(0,G.jsx)(`div`,{className:`min-h-screen flex items-center justify-center`,children:`Loading...`}):t?(0,G.jsx)(Fr,{to:`/login`,replace:!0}):(0,G.jsx)(G.Fragment,{children:e})}function h4e(){return(0,G.jsx)(l4e,{children:(0,G.jsx)(tf,{children:(0,G.jsx)(lo,{client:u4e,children:(0,G.jsx)(tee,{children:(0,G.jsx)(Nd,{children:(0,G.jsx)(P0e,{children:(0,G.jsxs)(Oke,{children:[(0,G.jsx)(d4e,{}),(0,G.jsx)(Oi,{children:(0,G.jsxs)(zr,{children:[(0,G.jsx)(Lr,{path:`/setup`,element:(0,G.jsx)(m4e,{children:(0,G.jsx)(w0e,{})})}),(0,G.jsx)(Lr,{path:`/login`,element:(0,G.jsx)(C0e,{})}),(0,G.jsx)(Lr,{path:`/camera/:printerId`,element:(0,G.jsx)(k$e,{})}),(0,G.jsx)(Lr,{path:`/overlay/:printerId`,element:(0,G.jsx)(G$e,{})}),(0,G.jsx)(Lr,{path:`/camwall`,element:(0,G.jsx)(z$e,{})}),(0,G.jsxs)(Lr,{element:(0,G.jsx)(p4e,{children:(0,G.jsx)(f4e,{children:(0,G.jsx)(J0e,{})})}),children:[(0,G.jsx)(Lr,{path:`spoolbuddy`,element:(0,G.jsx)(C2e,{})}),(0,G.jsx)(Lr,{path:`spoolbuddy/ams`,element:(0,G.jsx)(O2e,{})}),(0,G.jsx)(Lr,{path:`spoolbuddy/write-tag`,element:(0,G.jsx)(K2e,{})}),(0,G.jsx)(Lr,{path:`spoolbuddy/inventory`,element:(0,G.jsx)(o4e,{})}),(0,G.jsx)(Lr,{path:`spoolbuddy/settings`,element:(0,G.jsx)(V2e,{})}),(0,G.jsx)(Lr,{path:`spoolbuddy/calibration`,element:(0,G.jsx)(U2e,{})})]}),(0,G.jsxs)(Lr,{element:(0,G.jsx)(p4e,{children:(0,G.jsx)(f4e,{children:(0,G.jsx)(See,{})})}),children:[(0,G.jsx)(Lr,{index:!0,element:(0,G.jsx)(Cke,{})}),(0,G.jsx)(Lr,{path:`archives`,element:(0,G.jsx)(LBe,{})}),(0,G.jsx)(Lr,{path:`queue`,element:(0,G.jsx)(KHe,{})}),(0,G.jsx)(Lr,{path:`pipelines/runs`,element:(0,G.jsx)(Fr,{to:`/queue?tab=pipelines`,replace:!0})}),(0,G.jsx)(Lr,{path:`stats`,element:(0,G.jsx)(dUe,{})}),(0,G.jsx)(Lr,{path:`profiles`,element:(0,G.jsx)(xKe,{})}),(0,G.jsx)(Lr,{path:`finance`,element:(0,G.jsx)($9,{permission:`cost_centers:read_own`,children:(0,G.jsx)(GGe,{})})}),(0,G.jsx)(Lr,{path:`maintenance`,element:(0,G.jsx)(EKe,{})}),(0,G.jsx)(Lr,{path:`projects`,element:(0,G.jsx)(jKe,{})}),(0,G.jsx)(Lr,{path:`projects/:id`,element:(0,G.jsx)(IKe,{})}),(0,G.jsx)(Lr,{path:`inventory`,element:(0,G.jsx)(Z1e,{})}),(0,G.jsx)(Lr,{path:`files`,element:(0,G.jsx)(y$e,{})}),(0,G.jsx)(Lr,{path:`files/trash`,element:(0,G.jsx)(S$e,{})}),(0,G.jsx)(Lr,{path:`makerworld`,element:(0,G.jsx)($9,{permission:`makerworld:view`,children:(0,G.jsx)(f0e,{})})}),(0,G.jsx)(Lr,{path:`settings`,element:(0,G.jsx)($9,{permission:`settings:read`,children:(0,G.jsx)(BGe,{})})}),(0,G.jsx)(Lr,{path:`groups/new`,element:(0,G.jsx)($9,{permission:`groups:create`,children:(0,G.jsx)(q$e,{})})}),(0,G.jsx)(Lr,{path:`groups/:id/edit`,element:(0,G.jsx)($9,{permission:`groups:update`,children:(0,G.jsx)(q$e,{})})}),(0,G.jsx)(Lr,{path:`users`,element:(0,G.jsx)(Fr,{to:`/settings?tab=users`,replace:!0})}),(0,G.jsx)(Lr,{path:`groups`,element:(0,G.jsx)(Fr,{to:`/settings?tab=users`,replace:!0})}),(0,G.jsx)(Lr,{path:`system`,element:(0,G.jsx)(v0e,{})}),(0,G.jsx)(Lr,{path:`notifications`,element:(0,G.jsx)(T0e,{})}),(0,G.jsx)(Lr,{path:`gcode-viewer`,element:(0,G.jsx)(E0e,{})}),(0,G.jsx)(Lr,{path:`external/:id`,element:(0,G.jsx)(K$e,{})}),(0,G.jsx)(Lr,{path:`camera-tokens`,element:(0,G.jsx)(Fr,{to:`/settings?tab=apikeys#card-camera-tokens`,replace:!0})})]})]})})]})})})})})})})}(0,b.createRoot)(document.getElementById(`root`)).render((0,G.jsx)(y.StrictMode,{children:(0,G.jsx)(h4e,{})}));
\ No newline at end of file
+In order to be iterable, non-array objects must have a [Symbol.iterator]() method.`)}()}function w(e,t){(t==null||t>e.length)&&(t=e.length);for(var n=0,r=Array(t);n<t;n++)r[n]=e[n];return r}function T(e){return T=typeof Symbol==`function`&&typeof Symbol.iterator==`symbol`?function(e){return typeof e}:function(e){return e&&typeof Symbol==`function`&&e.constructor===Symbol&&e!==Symbol.prototype?`symbol`:typeof e},T(e)}function E(e,t){var n=Object.keys(e);if(Object.getOwnPropertySymbols){var r=Object.getOwnPropertySymbols(e);t&&(r=r.filter((function(t){return Object.getOwnPropertyDescriptor(e,t).enumerable}))),n.push.apply(n,r)}return n}function D(e,t){for(var n=0;n<t.length;n++){var r=t[n];r.enumerable=r.enumerable||!1,r.configurable=!0,`value`in r&&(r.writable=!0),Object.defineProperty(e,k(r.key),r)}}function O(e,t,n){return(t=k(t))in e?Object.defineProperty(e,t,{value:n,enumerable:!0,configurable:!0,writable:!0}):e[t]=n,e}function k(e){var t=function(e,t){if(T(e)!=`object`||!e)return e;var n=e[Symbol.toPrimitive];if(n!==void 0){var r=n.call(e,t||`default`);if(T(r)!=`object`)return r;throw TypeError(`@@toPrimitive must return a primitive value.`)}return(t===`string`?String:Number)(e)}(e,`string`);return T(t)==`symbol`?t:t+``}var A=function(){return e=function e(t,n){var r=this;if(function(e,t){if(!(e instanceof t))throw TypeError(`Cannot call a class as a function`)}(this,e),O(this,`input`,void 0),O(this,`options`,void 0),O(this,`utilities`,void 0),O(this,`caretPosition`,void 0),O(this,`caretPositionEnd`,void 0),O(this,`keyboardDOM`,void 0),O(this,`keyboardPluginClasses`,void 0),O(this,`keyboardDOMClass`,void 0),O(this,`buttonElements`,void 0),O(this,`currentInstanceName`,void 0),O(this,`allKeyboardInstances`,void 0),O(this,`keyboardInstanceNames`,void 0),O(this,`isFirstKeyboardInstance`,void 0),O(this,`physicalKeyboard`,void 0),O(this,`modules`,void 0),O(this,`activeButtonClass`,void 0),O(this,`holdInteractionTimeout`,void 0),O(this,`holdTimeout`,void 0),O(this,`isMouseHold`,void 0),O(this,`initialized`,void 0),O(this,`candidateBox`,void 0),O(this,`keyboardRowsDOM`,void 0),O(this,`defaultName`,`default`),O(this,`activeInputElement`,null),O(this,`handleParams`,(function(e,t){var n,r,i;if(typeof e==`string`)n=e.split(`.`).join(``),r=document.querySelector(`.${n}`),i=t;else if(e instanceof HTMLDivElement){if(!e.className)throw console.warn(`Any DOM element passed as parameter must have a class.`),Error(`KEYBOARD_DOM_CLASS_ERROR`);n=e.className.split(` `)[0],r=e,i=t}else n=`simple-keyboard`,r=document.querySelector(`.${n}`),i=e;return{keyboardDOMClass:n,keyboardDOM:r,options:i}})),O(this,`getOptions`,(function(){return r.options})),O(this,`getCaretPosition`,(function(){return r.caretPosition})),O(this,`getCaretPositionEnd`,(function(){return r.caretPositionEnd})),O(this,`registerModule`,(function(e,t){r.modules[e]||(r.modules[e]={}),t(r.modules[e])})),O(this,`getKeyboardClassString`,(function(){var e=[...arguments];return[r.keyboardDOMClass].concat(e).filter((function(e){return!!e})).join(` `)})),typeof window<`u`){var i=this.handleParams(t,n),a=i.keyboardDOMClass,o=i.keyboardDOM,s=i.options,c=s===void 0?{}:s;this.utilities=new f({getOptions:this.getOptions,getCaretPosition:this.getCaretPosition,getCaretPositionEnd:this.getCaretPositionEnd,dispatch:this.dispatch}),this.caretPosition=null,this.caretPositionEnd=null,this.keyboardDOM=o,this.options=function(e){for(var t=1;t<arguments.length;t++){var n=arguments[t]==null?{}:arguments[t];t%2?E(Object(n),!0).forEach((function(t){O(e,t,n[t])})):Object.getOwnPropertyDescriptors?Object.defineProperties(e,Object.getOwnPropertyDescriptors(n)):E(Object(n)).forEach((function(t){Object.defineProperty(e,t,Object.getOwnPropertyDescriptor(n,t))}))}return e}({layoutName:`default`,theme:`hg-theme-default`,inputName:`default`,preventMouseDownDefault:!1,enableLayoutCandidates:!0,excludeFromLayout:{}},c),this.keyboardPluginClasses=``,f.bindMethods(e,this);var l=this.options.inputName,u=l===void 0?this.defaultName:l;if(this.input={},this.input[u]=``,this.keyboardDOMClass=a,this.buttonElements={},window.SimpleKeyboardInstances||(window.SimpleKeyboardInstances={}),this.currentInstanceName=this.utilities.camelCase(this.keyboardDOMClass),window.SimpleKeyboardInstances[this.currentInstanceName]=this,this.allKeyboardInstances=window.SimpleKeyboardInstances,this.keyboardInstanceNames=Object.keys(window.SimpleKeyboardInstances),this.isFirstKeyboardInstance=this.keyboardInstanceNames[0]===this.currentInstanceName,this.physicalKeyboard=new _({dispatch:this.dispatch,getOptions:this.getOptions}),this.candidateBox=this.options.enableLayoutCandidates?new S({utilities:this.utilities,options:this.options}):null,!this.keyboardDOM)throw console.warn(`".${a}" was not found in the DOM.`),Error(`KEYBOARD_DOM_ERROR`);this.render(),this.modules={},this.loadModules()}},t=[{key:`setCaretPosition`,value:function(e){var t=arguments.length>1&&arguments[1]!==void 0?arguments[1]:e;this.caretPosition=e,this.caretPositionEnd=t}},{key:`getInputCandidates`,value:function(e){var t=this,n=this.options,r=n.layoutCandidates,i=n.layoutCandidatesCaseSensitiveMatch;if(!r||T(r)!==`object`)return{};var a=Object.keys(r).filter((function(n){var r=e.substring(0,t.getCaretPositionEnd()||0)||e,a=RegExp(`${t.utilities.escapeRegex(n)}\$`,i?`g`:`gi`);return!!C(r.matchAll(a)).length}));if(a.length>1){var o=a.sort((function(e,t){return t.length-e.length}))[0];return{candidateKey:o,candidateValue:r[o]}}if(a.length){var s=a[0];return{candidateKey:s,candidateValue:r[s]}}return{}}},{key:`showCandidatesBox`,value:function(e,t,n){var r=this;this.candidateBox&&this.candidateBox.show({candidateValue:t,targetElement:n,onSelect:function(t,n){var i=r.options,a=i.layoutCandidatesCaseSensitiveMatch,o=i.disableCandidateNormalization,s=i.enableLayoutCandidatesKeyPress,c=t;o||(c=t.normalize(`NFD`)),typeof r.options.beforeInputUpdate==`function`&&r.options.beforeInputUpdate(r);var l=r.getInput(r.options.inputName,!0),u=r.getCaretPositionEnd()||0,d=l.substring(0,u||0)||l,f=RegExp(`${r.utilities.escapeRegex(e)}\$`,a?`g`:`gi`),p=d.replace(f,c),m=l.replace(d,p),h=p.length-d.length,g=(u||l.length)+h;g<0&&(g=0),r.setInput(m,r.options.inputName,!0),r.setCaretPosition(g),s&&typeof r.options.onKeyPress==`function`&&r.options.onKeyPress(t,n),typeof r.options.onChange==`function`&&r.options.onChange(r.getInput(r.options.inputName,!0),n),typeof r.options.onChangeAll==`function`&&r.options.onChangeAll(r.getAllInputs(),n)}})}},{key:`handleButtonClicked`,value:function(e,t){var n=this.options,r=n.inputName,i=r===void 0?this.defaultName:r,a=n.debug;if(e!==`{//}`){this.input[i]||(this.input[i]=``),typeof this.options.beforeInputUpdate==`function`&&this.options.beforeInputUpdate(this);var o=this.utilities.getUpdatedInput(e,this.input[i],this.caretPosition,this.caretPositionEnd);if(this.utilities.isStandardButton(e)&&this.activeInputElement&&this.input[i]&&this.input[i]===o&&this.caretPosition===0&&this.caretPositionEnd===o.length)return this.setInput(``,this.options.inputName,!0),this.setCaretPosition(0),this.activeInputElement.value=``,this.activeInputElement.setSelectionRange(0,0),void this.handleButtonClicked(e,t);if(typeof this.options.onKeyPress==`function`&&this.options.onKeyPress(e,t),this.input[i]!==o&&(!this.options.inputPattern||this.options.inputPattern&&this.inputPatternIsValid(o))){if(this.options.maxLength&&this.utilities.handleMaxLength(this.input,o))return;var s=this.utilities.getUpdatedInput(e,this.input[i],this.caretPosition,this.caretPositionEnd,!0);if(this.setInput(s,this.options.inputName,!0),a&&console.log(`Input changed:`,this.getAllInputs()),this.options.debug&&console.log(`Caret at: `,this.getCaretPosition(),this.getCaretPositionEnd(),`(${this.keyboardDOMClass})`,t?.type),this.options.syncInstanceInputs&&this.syncInstanceInputs(),typeof this.options.onChange==`function`&&this.options.onChange(this.getInput(this.options.inputName,!0),t),typeof this.options.onChangeAll==`function`&&this.options.onChangeAll(this.getAllInputs(),t),t!=null&&t.target&&this.options.enableLayoutCandidates){var c,l=this.getInputCandidates(o),u=l.candidateKey,d=l.candidateValue;u&&d?this.showCandidatesBox(u,d,this.keyboardDOM):(c=this.candidateBox)==null||c.destroy()}}this.caretPositionEnd&&this.caretPosition!==this.caretPositionEnd&&(this.setCaretPosition(this.caretPositionEnd,this.caretPositionEnd),this.activeInputElement&&this.activeInputElement.setSelectionRange(this.caretPositionEnd,this.caretPositionEnd),this.options.debug&&console.log(`Caret position aligned`,this.caretPosition)),a&&console.log(`Key pressed:`,e)}}},{key:`getMouseHold`,value:function(){return this.isMouseHold}},{key:`setMouseHold`,value:function(e){this.options.syncInstanceInputs?this.dispatch((function(t){t.isMouseHold=e})):this.isMouseHold=e}},{key:`handleButtonMouseDown`,value:function(e,t){var n=this;t&&(this.options.preventMouseDownDefault&&t.preventDefault(),this.options.stopMouseDownPropagation&&t.stopPropagation(),t.target.classList.add(this.activeButtonClass)),this.holdInteractionTimeout&&clearTimeout(this.holdInteractionTimeout),this.holdTimeout&&clearTimeout(this.holdTimeout),this.setMouseHold(!0),this.options.disableButtonHold||(this.holdTimeout=window.setTimeout((function(){(n.getMouseHold()&&(!e.includes(`{`)&&!e.includes(`}`)||e===`{delete}`||e===`{backspace}`||e===`{bksp}`||e===`{space}`||e===`{tab}`)||e===`{arrowright}`||e===`{arrowleft}`||e===`{arrowup}`||e===`{arrowdown}`)&&(n.options.debug&&console.log(`Button held:`,e),n.handleButtonHold(e)),clearTimeout(n.holdTimeout)}),500))}},{key:`handleButtonMouseUp`,value:function(e,t){var n=this;t&&(this.options.preventMouseUpDefault&&t.preventDefault&&t.preventDefault(),this.options.stopMouseUpPropagation&&t.stopPropagation&&t.stopPropagation(),!(t.target===this.keyboardDOM||t.target&&this.keyboardDOM.contains(t.target)||this.candidateBox&&this.candidateBox.candidateBoxElement&&(t.target===this.candidateBox.candidateBoxElement||t.target&&this.candidateBox.candidateBoxElement.contains(t.target)))&&this.candidateBox&&this.candidateBox.destroy()),this.recurseButtons((function(e){e.classList.remove(n.activeButtonClass)})),this.setMouseHold(!1),this.holdInteractionTimeout&&clearTimeout(this.holdInteractionTimeout),e&&typeof this.options.onKeyReleased==`function`&&this.options.onKeyReleased(e,t)}},{key:`handleKeyboardContainerMouseDown`,value:function(e){this.options.preventMouseDownDefault&&e.preventDefault()}},{key:`handleButtonHold`,value:function(e){var t=this;this.holdInteractionTimeout&&clearTimeout(this.holdInteractionTimeout),this.holdInteractionTimeout=window.setTimeout((function(){t.getMouseHold()?(t.handleButtonClicked(e),t.handleButtonHold(e)):clearTimeout(t.holdInteractionTimeout)}),100)}},{key:`syncInstanceInputs`,value:function(){var e=this;this.dispatch((function(t){t.replaceInput(e.input),t.setCaretPosition(e.caretPosition,e.caretPositionEnd)}))}},{key:`clearInput`,value:function(){var e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:this.options.inputName||this.defaultName;this.input[e]=``,this.setCaretPosition(0),this.options.syncInstanceInputs&&this.syncInstanceInputs()}},{key:`getInput`,value:function(){var e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:this.options.inputName||this.defaultName,t=arguments.length>1&&arguments[1]!==void 0&&arguments[1];return this.options.syncInstanceInputs&&!t&&this.syncInstanceInputs(),this.options.rtl?`‫`+this.input[e].replace(`‫`,``).replace(`‬`,``)+`‬`:this.input[e]}},{key:`getAllInputs`,value:function(){var e=this,t={};return Object.keys(this.input).forEach((function(n){t[n]=e.getInput(n,!0)})),t}},{key:`setInput`,value:function(e){var t=arguments.length>1&&arguments[1]!==void 0?arguments[1]:this.options.inputName||this.defaultName,n=arguments.length>2?arguments[2]:void 0;this.input[t]=e,!n&&this.options.syncInstanceInputs&&this.syncInstanceInputs()}},{key:`replaceInput`,value:function(e){this.input=e}},{key:`setOptions`,value:function(){var e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:{},t=this.changedOptions(e);this.options=Object.assign(this.options,e),t.length&&(this.options.debug&&console.log(`changedOptions`,t),this.onSetOptions(t),this.render())}},{key:`changedOptions`,value:function(e){var t=this;return Object.keys(e).filter((function(n){return JSON.stringify(e[n])!==JSON.stringify(t.options[n])}))}},{key:`onSetOptions`,value:function(){var e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:[];e.includes(`layoutName`)&&this.candidateBox&&this.candidateBox.destroy(),(e.includes(`layoutCandidatesPageSize`)||e.includes(`layoutCandidates`))&&this.candidateBox&&(this.candidateBox.destroy(),this.candidateBox=new S({utilities:this.utilities,options:this.options}))}},{key:`resetRows`,value:function(){this.keyboardRowsDOM&&this.keyboardRowsDOM.remove(),this.keyboardDOM.className=this.keyboardDOMClass,this.keyboardDOM.setAttribute(`data-skInstance`,this.currentInstanceName),this.buttonElements={}}},{key:`dispatch`,value:function(e){if(!window.SimpleKeyboardInstances)throw console.warn(`SimpleKeyboardInstances is not defined. Dispatch cannot be called.`),Error(`INSTANCES_VAR_ERROR`);return Object.keys(window.SimpleKeyboardInstances).forEach((function(t){e(window.SimpleKeyboardInstances[t],t)}))}},{key:`addButtonTheme`,value:function(e,t){var n=this;t&&e&&(e.split(` `).forEach((function(r){t.split(` `).forEach((function(t){n.options.buttonTheme||(n.options.buttonTheme=[]);var i=!1;n.options.buttonTheme.map((function(e){if(e!=null&&e.class.split(` `).includes(t)){i=!0;var n=e.buttons.split(` `);n.includes(r)||(i=!0,n.push(r),e.buttons=n.join(` `))}return e})),i||n.options.buttonTheme.push({class:t,buttons:e})}))})),this.render())}},{key:`removeButtonTheme`,value:function(e,t){var n=this;if(!e&&!t)return this.options.buttonTheme=[],void this.render();e&&Array.isArray(this.options.buttonTheme)&&this.options.buttonTheme.length&&(e.split(` `).forEach((function(e){var r;(r=n.options)==null||(r=r.buttonTheme)==null||r.map((function(r,i){if(r&&t&&t.includes(r.class)||!t){var a,o=r?.buttons.split(` `).filter((function(t){return t!==e}));r&&o!=null&&o.length?r.buttons=o.join(` `):((a=n.options.buttonTheme)==null||a.splice(i,1),r=null)}return r}))})),this.render())}},{key:`getButtonElement`,value:function(e){var t,n=this.buttonElements[e];return n&&(t=n.length>1?n:n[0]),t}},{key:`inputPatternIsValid`,value:function(e){var t,n=this.options.inputPattern;if((t=n instanceof RegExp?n:n[this.options.inputName||this.defaultName])&&e){var r=t.test(e);return this.options.debug&&console.log(`inputPattern ("${t}"): ${r?`passed`:`did not pass!`}`),r}return!0}},{key:`setEventListeners`,value:function(){if(this.isFirstKeyboardInstance||!this.allKeyboardInstances){this.options.debug&&console.log(`Caret handling started (${this.keyboardDOMClass})`);var e=this.options.physicalKeyboardHighlightPreventDefault,t=e!==void 0&&e;document.addEventListener(`keyup`,this.handleKeyUp,t),document.addEventListener(`keydown`,this.handleKeyDown,t),document.addEventListener(`mouseup`,this.handleMouseUp),document.addEventListener(`touchend`,this.handleTouchEnd),this.options.updateCaretOnSelectionChange&&document.addEventListener(`selectionchange`,this.handleSelectionChange),document.addEventListener(`select`,this.handleSelect)}}},{key:`handleKeyUp`,value:function(e){this.caretEventHandler(e),this.options.physicalKeyboardHighlight&&this.physicalKeyboard.handleHighlightKeyUp(e)}},{key:`handleKeyDown`,value:function(e){this.options.physicalKeyboardHighlight&&this.physicalKeyboard.handleHighlightKeyDown(e)}},{key:`handleMouseUp`,value:function(e){this.caretEventHandler(e)}},{key:`handleTouchEnd`,value:function(e){this.caretEventHandler(e)}},{key:`handleSelect`,value:function(e){this.caretEventHandler(e)}},{key:`handleSelectionChange`,value:function(e){navigator.userAgent.includes(`Firefox`)||this.caretEventHandler(e)}},{key:`caretEventHandler`,value:function(e){var t,n=this;e.target.tagName&&(t=e.target.tagName.toLowerCase()),this.dispatch((function(r){var i=e.target===r.keyboardDOM||e.target&&r.keyboardDOM.contains(e.target);if(n.options.syncInstanceInputs&&Array.isArray(e.path)&&(i=e.path.some((function(e){var t;return e==null||(t=e.hasAttribute)==null?void 0:t.call(e,`data-skInstance`)}))),(t===`textarea`||t===`input`&&[`text`,`search`,`url`,`tel`,`password`].includes(e.target.type))&&!r.options.disableCaretPositioning){var a=e.target.selectionStart,o=e.target.selectionEnd;r.options.rtl&&(a=r.utilities.getRtlOffset(a,r.getInput()),o=r.utilities.getRtlOffset(o,r.getInput())),r.setCaretPosition(a,o),r.activeInputElement=e.target,r.options.debug&&console.log(`Caret at: `,r.getCaretPosition(),r.getCaretPositionEnd(),e&&e.target.tagName.toLowerCase(),`(${r.keyboardDOMClass})`,e?.type)}else !r.options.disableCaretPositioning&&i||e?.type===`selectionchange`||(r.setCaretPosition(null),r.activeInputElement=null,r.options.debug&&console.log(`Caret position reset due to "${e?.type}" event`,e))}))}},{key:`recurseButtons`,value:function(e){var t=this;e&&Object.keys(this.buttonElements).forEach((function(n){return t.buttonElements[n].forEach(e)}))}},{key:`destroy`,value:function(){this.options.debug&&console.log(`Destroying simple-keyboard instance: ${this.currentInstanceName}`);var e=this.options.physicalKeyboardHighlightPreventDefault,t=e!==void 0&&e;document.removeEventListener(`keyup`,this.handleKeyUp,t),document.removeEventListener(`keydown`,this.handleKeyDown,t),document.removeEventListener(`mouseup`,this.handleMouseUp),document.removeEventListener(`touchend`,this.handleTouchEnd),document.removeEventListener(`select`,this.handleSelect),this.options.updateCaretOnSelectionChange&&document.removeEventListener(`selectionchange`,this.handleSelectionChange),document.onpointerup=null,document.ontouchend=null,document.ontouchcancel=null,document.onmouseup=null,this.recurseButtons((function(e){e&&=(e.onpointerdown=null,e.onpointerup=null,e.onpointercancel=null,e.ontouchstart=null,e.ontouchend=null,e.ontouchcancel=null,e.onclick=null,e.onmousedown=null,e.onmouseup=null,e.remove(),null)})),this.keyboardDOM.onpointerdown=null,this.keyboardDOM.ontouchstart=null,this.keyboardDOM.onmousedown=null,this.resetRows(),this.candidateBox&&=(this.candidateBox.destroy(),null),this.activeInputElement=null,this.keyboardDOM.removeAttribute(`data-skInstance`),this.keyboardDOM.innerHTML=``,window.SimpleKeyboardInstances[this.currentInstanceName]=null,delete window.SimpleKeyboardInstances[this.currentInstanceName],this.initialized=!1}},{key:`getButtonThemeClasses`,value:function(e){var t=this.options.buttonTheme,n=[];return Array.isArray(t)&&t.forEach((function(t){if(t&&t.class&&typeof t.class==`string`&&t.buttons&&typeof t.buttons==`string`){var r=t.class.split(` `);t.buttons.split(` `).includes(e)&&(n=[].concat(C(n),C(r)))}else console.warn(`Incorrect "buttonTheme". Please check the documentation.`,t)})),n}},{key:`setDOMButtonAttributes`,value:function(e,t){var n=this.options.buttonAttributes;Array.isArray(n)&&n.forEach((function(n){n.attribute&&typeof n.attribute==`string`&&n.value&&typeof n.value==`string`?n.buttons&&typeof n.buttons==`string`?n.buttons.split(` `).includes(e)&&t(n.attribute,n.value):t(n.attribute,n.value):console.warn(`Incorrect "buttonAttributes". Please check the documentation.`,n)}))}},{key:`onTouchDeviceDetected`,value:function(){this.processAutoTouchEvents(),this.disableContextualWindow()}},{key:`disableContextualWindow`,value:function(){window.oncontextmenu=function(e){var t;if((t=e.target.classList)!=null&&t.contains(`hg-button`))return e.preventDefault(),e.stopPropagation(),!1}}},{key:`processAutoTouchEvents`,value:function(){this.options.autoUseTouchEvents&&(this.options.useTouchEvents=!0,this.options.debug&&console.log(`autoUseTouchEvents: Touch device detected, useTouchEvents enabled.`))}},{key:`onInit`,value:function(){this.options.debug&&console.log(`${this.keyboardDOMClass} Initialized`),this.setEventListeners(),typeof this.options.onInit==`function`&&this.options.onInit(this)}},{key:`beforeFirstRender`,value:function(){this.utilities.isTouchDevice()&&this.onTouchDeviceDetected(),typeof this.options.beforeFirstRender==`function`&&this.options.beforeFirstRender(this),this.isFirstKeyboardInstance&&this.utilities.pointerEventsSupported()&&!this.options.useTouchEvents&&!this.options.useMouseEvents&&this.options.debug&&console.log(`Using PointerEvents as it is supported by this browser`),this.options.useTouchEvents&&this.options.debug&&console.log(`useTouchEvents has been enabled. Only touch events will be used.`)}},{key:`beforeRender`,value:function(){typeof this.options.beforeRender==`function`&&this.options.beforeRender(this)}},{key:`onRender`,value:function(){typeof this.options.onRender==`function`&&this.options.onRender(this)}},{key:`onModulesLoaded`,value:function(){typeof this.options.onModulesLoaded==`function`&&this.options.onModulesLoaded(this)}},{key:`loadModules`,value:function(){var e=this;Array.isArray(this.options.modules)&&(this.options.modules.forEach((function(t){var n=e.utilities.isConstructor(t)?new t(e):t(e);n.init&&n.init(e)})),this.keyboardPluginClasses=`modules-loaded`,this.render(),this.onModulesLoaded())}},{key:`getModuleProp`,value:function(e,t){return!!this.modules[e]&&this.modules[e][t]}},{key:`getModulesList`,value:function(){return Object.keys(this.modules)}},{key:`parseRowDOMContainers`,value:function(e,t,n,r){var i=this,a=Array.from(e.children),o=0;return a.length&&n.forEach((function(n,s){var c=r[s];if(!(c&&c>n))return!1;var l=n-o,u=c-o,d=document.createElement(`div`);d.className+=`hg-button-container`;var f=`${i.options.layoutName}-r${t}c${s}`;d.setAttribute(`data-skUID`,f);var p=a.splice(l,u-l+1);o+=u-l,p.forEach((function(e){return d.appendChild(e)})),a.splice(l,0,d),e.innerHTML=``,a.forEach((function(t){return e.appendChild(t)})),i.options.debug&&console.log(`rowDOMContainer`,p,l,u,o+1)})),e}},{key:`render`,value:function(){var e=this;this.resetRows(),this.initialized||this.beforeFirstRender(),this.beforeRender();var t=`hg-layout-${this.options.layoutName}`,n=this.options.layout||{default:["` 1 2 3 4 5 6 7 8 9 0 - = {bksp}",`{tab} q w e r t y u i o p [ ] \\`,`{lock} a s d f g h j k l ; ' {enter}`,`{shift} z x c v b n m , . / {shift}`,`.com @ {space}`],shift:[`~ ! @ # $ % ^ & * ( ) _ + {bksp}`,`{tab} Q W E R T Y U I O P { } |`,`{lock} A S D F G H J K L : " {enter}`,`{shift} Z X C V B N M < > ? {shift}`,`.com @ {space}`]},r=this.options.useTouchEvents||!1,i=r?`hg-touch-events`:``,a=this.options.useMouseEvents||!1,o=this.options.disableRowButtonContainers;this.keyboardDOM.className=this.getKeyboardClassString(this.options.theme,t,this.keyboardPluginClasses,i),this.keyboardDOM.setAttribute(`data-skInstance`,this.currentInstanceName),this.keyboardRowsDOM=document.createElement(`div`),this.keyboardRowsDOM.className=`hg-rows`,n[this.options.layoutName||this.defaultName].forEach((function(t,n){var i=t.split(` `);e.options.excludeFromLayout&&e.options.excludeFromLayout[e.options.layoutName||e.defaultName]&&(i=i.filter((function(t){return e.options.excludeFromLayout&&!e.options.excludeFromLayout[e.options.layoutName||e.defaultName].includes(t)})));var s=document.createElement(`div`);s.className+=`hg-row`;var c=[],l=[];i.forEach((function(t,i){var u,d=!o&&typeof t==`string`&&t.length>1&&t.indexOf(`[`)===0,f=!o&&typeof t==`string`&&t.length>1&&t.indexOf(`]`)===t.length-1;d&&(c.push(i),t=t.replace(/\[/g,``)),f&&(l.push(i),t=t.replace(/\]/g,``));var p=e.utilities.getButtonClass(t),m=e.utilities.getButtonDisplayName(t,e.options.display,e.options.mergeDisplay),h=e.options.useButtonTag?`button`:`div`,g=document.createElement(h);g.className+=`hg-button ${p}`,(u=g.classList).add.apply(u,C(e.getButtonThemeClasses(t))),e.setDOMButtonAttributes(t,(function(e,t){g.setAttribute(e,t)})),e.activeButtonClass=`hg-activeButton`,!e.utilities.pointerEventsSupported()||r||a?r?(g.ontouchstart=function(n){e.handleButtonClicked(t,n),e.handleButtonMouseDown(t,n)},g.ontouchend=function(n){e.handleButtonMouseUp(t,n)},g.ontouchcancel=function(n){e.handleButtonMouseUp(t,n)}):(g.onclick=function(n){e.setMouseHold(!1),typeof e.options.onKeyReleased==`function`||e.options.useMouseEvents&&e.options.clickOnMouseDown||e.handleButtonClicked(t,n)},g.onmousedown=function(n){(typeof e.options.onKeyReleased==`function`||e.options.useMouseEvents&&e.options.clickOnMouseDown)&&!e.isMouseHold&&e.handleButtonClicked(t,n),e.handleButtonMouseDown(t,n)},g.onmouseup=function(n){e.handleButtonMouseUp(t,n)}):(g.onpointerdown=function(n){e.handleButtonClicked(t,n),e.handleButtonMouseDown(t,n)},g.onpointerup=function(n){e.handleButtonMouseUp(t,n)},g.onpointercancel=function(n){e.handleButtonMouseUp(t,n)}),g.setAttribute(`data-skBtn`,t);var _=`${e.options.layoutName}-r${n}b${i}`;g.setAttribute(`data-skBtnUID`,_);var v=document.createElement(`span`);v.innerHTML=m,g.appendChild(v),e.buttonElements[t]||(e.buttonElements[t]=[]),e.buttonElements[t].push(g),s.appendChild(g)})),s=e.parseRowDOMContainers(s,n,c,l),e.keyboardRowsDOM.appendChild(s)})),this.keyboardDOM.appendChild(this.keyboardRowsDOM),this.onRender(),this.initialized||(this.initialized=!0,!this.utilities.pointerEventsSupported()||r||a?r?(document.ontouchend=function(t){return e.handleButtonMouseUp(void 0,t)},document.ontouchcancel=function(t){return e.handleButtonMouseUp(void 0,t)},this.keyboardDOM.ontouchstart=function(t){return e.handleKeyboardContainerMouseDown(t)}):r||(document.onmouseup=function(t){return e.handleButtonMouseUp(void 0,t)},this.keyboardDOM.onmousedown=function(t){return e.handleKeyboardContainerMouseDown(t)}):(document.onpointerup=function(t){return e.handleButtonMouseUp(void 0,t)},this.keyboardDOM.onpointerdown=function(t){return e.handleKeyboardContainerMouseDown(t)}),this.onInit())}}],t&&D(e.prototype,t),n&&D(e,n),Object.defineProperty(e,"prototype",{writable:!1}),e;var e,t,n}(),j=A;return r}()},442:function(t){t.exports=e}},n={};function r(e){var i=n[e];if(i!==void 0)return i.exports;var a=n[e]={exports:{}};return t[e].call(a.exports,a,a.exports,r),a.exports}r.n=function(e){var t=e&&e.__esModule?function(){return e.default}:function(){return e};return r.d(t,{a:t}),t},r.d=function(e,t){for(var n in t)r.o(t,n)&&!r.o(e,n)&&Object.defineProperty(e,n,{enumerable:!0,get:t[n]})},r.o=function(e,t){return Object.prototype.hasOwnProperty.call(e,t)},r.r=function(e){typeof Symbol<`u`&&Symbol.toStringTag&&Object.defineProperty(e,Symbol.toStringTag,{value:`Module`}),Object.defineProperty(e,"__esModule",{value:!0})};var i={};return function(){r.r(i),r.d(i,{KeyboardReact:function(){return u},default:function(){return d}}),r(981);var e=r(442),t=r(548),n=r.n(t);function a(e){return a=typeof Symbol==`function`&&typeof Symbol.iterator==`symbol`?function(e){return typeof e}:function(e){return e&&typeof Symbol==`function`&&e.constructor===Symbol&&e!==Symbol.prototype?`symbol`:typeof e},a(e)}function o(e,t){var n=Object.keys(e);if(Object.getOwnPropertySymbols){var r=Object.getOwnPropertySymbols(e);t&&(r=r.filter((function(t){return Object.getOwnPropertyDescriptor(e,t).enumerable}))),n.push.apply(n,r)}return n}function s(e){for(var t=1;t<arguments.length;t++){var n=arguments[t]==null?{}:arguments[t];t%2?o(Object(n),!0).forEach((function(t){c(e,t,n[t])})):Object.getOwnPropertyDescriptors?Object.defineProperties(e,Object.getOwnPropertyDescriptors(n)):o(Object(n)).forEach((function(t){Object.defineProperty(e,t,Object.getOwnPropertyDescriptor(n,t))}))}return e}function c(e,t,n){return(t=function(e){var t=function(e,t){if(a(e)!=`object`||!e)return e;var n=e[Symbol.toPrimitive];if(n!==void 0){var r=n.call(e,t||`default`);if(a(r)!=`object`)return r;throw TypeError(`@@toPrimitive must return a primitive value.`)}return(t===`string`?String:Number)(e)}(e,`string`);return a(t)==`symbol`?t:t+``}(t))in e?Object.defineProperty(e,t,{value:n,enumerable:!0,configurable:!0,writable:!0}):e[t]=n,e}var l=function(e){return s(s({},e),{},{keyboardRef:null})},u=function(t){var r=t.baseClass||`react-simple-keyboard`,i=e.useRef(null),a=e.useRef(null),o=e.useRef(null),c=e.useRef(t);return e.useEffect((function(){return function(){o.current&&o.current.destroy(),i.current=!1}}),[]),e.useEffect((function(){var e=function(e){return s(s({},e),{},{theme:`simple-keyboard ${e.theme||`hg-theme-default`}`})}(t);if(!i.current){i.current=!0,e.debug&&console.log(`ReactSimpleKeyboard: Init`);var u=a.current,d=`.${r}`;o.current=new(n())(u||d,e),e.keyboardRef&&e.keyboardRef(o.current)}var f=function(e,t){var n=l(t),r=l(e);return Object.keys(n).filter((function(e){return n[e]!==r[e]}))}(c.current,e);if(f.length){var p=o.current;c.current=e,p?.setOptions(e),e.debug&&console.log(`ReactSimpleKeyboard - setOptions called due to updated props:`,f)}}),[i,r,c,t]),e.createElement(`div`,{className:r,ref:a})},d=u}(),i}()}))}))(),1);function q0e(e,t=[]){if(H9(e))return e;if(typeof e==`object`&&e){let n=e;if(H9(n.default))return n.default;for(let e of t)if(H9(n[e]))return n[e]}return e}function H9(e){return typeof e==`function`||typeof e==`string`?!0:typeof e==`object`&&!!e&&`$$typeof`in e}var J0e=q0e(K0e.default,[`KeyboardReact`]),Y0e=new Set([`text`,`password`,`email`,`search`,`url`,`number`]);function U9(e,t){(Object.getOwnPropertyDescriptor(HTMLInputElement.prototype,`value`)?.set??Object.getOwnPropertyDescriptor(HTMLTextAreaElement.prototype,`value`)?.set)?.call(e,t),e.dispatchEvent(new Event(`input`,{bubbles:!0}))}function X0e({onVisibilityChange:e}){let[t,n]=(0,y.useState)(!1),[r,i]=(0,y.useState)(!1),a=(0,y.useRef)(!1),[o,s]=(0,y.useState)(`default`),c=(0,y.useRef)(null),l=(0,y.useRef)(null),u=(0,y.useRef)(null);(0,y.useEffect)(()=>{e?.(t)},[t,e]);let d=(0,y.useCallback)(e=>{if(a.current)return;let t=e.target;if(!t.closest(`[data-vkb="false"]`)){if(t instanceof HTMLInputElement){if(!Y0e.has(t.type))return}else if(!(t instanceof HTMLTextAreaElement))return;c.current=t,n(!0),s(`default`),l.current?.setInput?.(c.current.value),setTimeout(()=>{(t.closest(`.bg-zinc-800, .rounded-lg, [data-vkb-group]`)??t).scrollIntoView({behavior:`smooth`,block:`nearest`})},100)}},[]),f=(0,y.useCallback)(()=>{setTimeout(()=>{let e=document.activeElement;e&&(u.current?.contains(e)||e===c.current)||(n(!1),c.current=null)},150)},[]);(0,y.useEffect)(()=>(document.addEventListener(`focusin`,d),document.addEventListener(`focusout`,f),()=>{document.removeEventListener(`focusin`,d),document.removeEventListener(`focusout`,f)}),[d,f]);let p=(0,y.useCallback)(()=>{a.current=!0,i(!0),c.current?.blur(),c.current=null,setTimeout(()=>{n(!1),i(!1),a.current=!1},400)},[]),m=(0,y.useCallback)(e=>{let t=c.current;if(t){if(e===`{shift}`){s(e=>e==="default"?`shift`:`default`);return}if(e===`{lock}`){s(e=>e==="default"?`shift`:`default`);return}if(e===`{close}`){p();return}e===`{bksp}`?U9(t,t.value.slice(0,-1)):e===`{space}`?U9(t,t.value+` `):(U9(t,t.value+e),o===`shift`&&s(`default`)),t.focus(),l.current?.setInput?.(t.value)}},[o,p]);return t?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`fixed inset-0 z-[9998] bg-transparent`,onMouseDown:e=>{e.preventDefault(),e.stopPropagation(),r||p()},onTouchStart:e=>{e.preventDefault(),e.stopPropagation(),r||p()},onClick:e=>{e.preventDefault(),e.stopPropagation()}}),!r&&(0,G.jsx)(`div`,{ref:u,className:`relative z-[9999] shrink-0`,onMouseDown:e=>e.preventDefault(),onTouchStart:e=>{e.target.closest(`.hg-button`)||e.preventDefault()},children:(0,G.jsx)(J0e,{keyboardRef:e=>{l.current=e},layoutName:o,onKeyPress:m,theme:`simple-keyboard vkb-theme`,layout:{default:[`1 2 3 4 5 6 7 8 9 0 {bksp}`,`q w e r t y u i o p`,`{lock} a s d f g h j k l`,`{shift} z x c v b n m . @`,`{space} {close}`],shift:[`! @ # $ % ^ & * ( ) {bksp}`,`Q W E R T Y U I O P`,`{lock} A S D F G H J K L`,`{shift} Z X C V B N M , _`,`{space} {close}`]},display:{"{bksp}":`⌫`,"{close}":`✕ Close`,"{shift}":`⇧`,"{lock}":`⇪`,"{space}":` `}})})]}):null}function Z0e(){Mf();let[e,t]=(0,y.useState)(null),[n,r]=(0,y.useState)(null),[i,a]=(0,y.useState)(100),{i18n:o}=U(),s=or(),c=rr(),l=G0e(),{setViewportSuppressed:u}=Gd();(0,y.useEffect)(()=>(u(!0),()=>u(!1)),[u]);let{data:d}=K({queryKey:[`settings`],queryFn:Z.getSettings});(0,y.useEffect)(()=>{d?.language&&d.language!==o.language&&o.changeLanguage(d.language)},[d?.language,o]);let{data:f=[]}=K({queryKey:[`spoolbuddy-devices`],queryFn:()=>Dd.getDevices(),refetchInterval:3e4}),p=f[0],m=l.deviceOnline||!!p?.online,h=(0,y.useMemo)(()=>({...l,deviceOnline:m}),[l,m]),g=(0,y.useRef)(!1);(0,y.useEffect)(()=>{p&&!g.current&&(a(p.display_brightness),g.current=!0)},[p]),(0,y.useEffect)(()=>{let e=document.documentElement,t=e.classList.contains(`dark`);return e.classList.add(`dark`),()=>{t||e.classList.remove(`dark`)}},[]);let{data:_}=K({queryKey:[`spoolbuddy-update-check`,p?.device_id],queryFn:()=>p?Dd.checkDaemonUpdate(p.device_id):Promise.resolve(null),enabled:!!p,refetchInterval:300*1e3,staleTime:0}),v=(0,y.useRef)(null);(0,y.useEffect)(()=>{if(!m){let e=`SpoolBuddy device disconnected`;r({type:`warning`,message:e}),v.current=e}else if(_?.update_available&&_.latest_version){let e=`Update available: v${_.latest_version}`;r({type:`info`,message:e}),v.current=e}else v.current&&=(r(null),null)},[m,_?.update_available,_?.latest_version]);let b=!!(l.matchedSpool||l.unknownTagUid||l.unknownTrayUuid),x=(0,y.useRef)(!1);(0,y.useEffect)(()=>{b&&!x.current&&c.pathname!==`/spoolbuddy`&&s(`/spoolbuddy`),x.current=b},[b,c.pathname,s]);let{data:S=[]}=K({queryKey:[`printers`],queryFn:()=>Z.getPrinters()}),C=Co({queries:S.map(e=>({queryKey:[`printerStatus`,e.id],queryFn:()=>Z.getPrinterStatus(e.id),refetchInterval:1e4,select:e=>({connected:e?.connected})}))}),w=(0,y.useMemo)(()=>S.filter((e,t)=>C[t]?.data?.connected),[S,C]),T=(0,y.useRef)(null),E=(0,y.useRef)(!1),D=(0,y.useRef)(null),O=(0,y.useCallback)(e=>{T.current={x:e.touches[0].clientX,y:e.touches[0].clientY},E.current=!1},[]),k=(0,y.useCallback)(n=>{if(!T.current)return;let r=n.changedTouches[0].clientX-T.current.x,i=n.changedTouches[0].clientY-T.current.y,a=T.current.y;if(T.current=null,E.current=!1,i>=50&&Math.abs(i)>Math.abs(r)&&a<120){N(!0);return}if(w.length<2||Math.abs(r)<50||Math.abs(i)>Math.abs(r))return;let o=w.findIndex(t=>t.id===e);t(w[r<0?(o+1)%w.length:(o-1+w.length)%w.length].id)},[w,e,t]);(0,y.useEffect)(()=>{let e=D.current;if(!e)return;let t=e=>{if(!T.current)return;let t=Math.abs(e.touches[0].clientX-T.current.x),n=Math.abs(e.touches[0].clientY-T.current.y);if(E.current){e.preventDefault();return}t>10&&t>n&&(E.current=!0,e.preventDefault())};return e.addEventListener(`touchmove`,t,{passive:!1}),()=>e.removeEventListener(`touchmove`,t)},[]);let[A,j]=(0,y.useState)(!1),[M,N]=(0,y.useState)(!1);return(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{ref:D,"data-spoolbuddy-kiosk":!0,className:`w-screen h-screen bg-bambu-dark text-white flex flex-col overflow-hidden`,style:{...i<100?{filter:`brightness(${i/100})`}:void 0,overscrollBehaviorX:`none`},onTouchStart:O,onTouchEnd:k,children:[(0,G.jsx)(`button`,{onClick:()=>N(!0),className:`w-full h-1.5 bg-bambu-dark-secondary flex justify-center items-center shrink-0 touch-none`,"aria-label":`Open quick menu`,children:(0,G.jsx)(`div`,{className:`w-8 h-0.5 rounded-full bg-zinc-600`})}),(0,G.jsx)(R0e,{selectedPrinterId:e,onPrinterChange:t,deviceOnline:m}),(0,G.jsx)(`main`,{className:`flex-1 overflow-y-auto`,children:(0,G.jsx)(Ir,{context:{selectedPrinterId:e,setSelectedPrinterId:t,sbState:h,setAlert:r,displayBrightness:i,setDisplayBrightness:a}})}),!A&&(0,G.jsx)(V0e,{alert:n}),!A&&(0,G.jsx)(B0e,{}),(0,G.jsx)(X0e,{onVisibilityChange:j})]}),(0,G.jsx)(H0e,{isOpen:M,onClose:()=>N(!1),deviceId:p?.device_id??null,deviceOnline:m})]})}function W9({color:e,isEmpty:t,size:n=32}){return t?(0,G.jsx)(`div`,{className:`rounded-full border-2 border-dashed border-zinc-500 flex items-center justify-center`,style:{width:n,height:n},children:(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full bg-zinc-600`})}):(0,G.jsxs)(`svg`,{width:n,height:n,viewBox:`0 0 32 32`,children:[(0,G.jsx)(`circle`,{cx:`16`,cy:`16`,r:`14`,fill:e,stroke:`white`,strokeWidth:`1.5`,strokeOpacity:`0.7`}),(0,G.jsx)(`circle`,{cx:`16`,cy:`16`,r:`11`,fill:e,style:{filter:`brightness(0.85)`}})]})}var Q0e=`spoolbuddy-default-core-weight`;function $0e(){try{let e=localStorage.getItem(Q0e);if(e){let t=parseInt(e,10);if(t>=0&&t<=500)return t}}catch{}return 250}function e2e({spool:e,scaleWeight:t,onClose:n,onSyncWeight:r,onAssignToAms:i,isAssigned:a,onUnassignFromAms:o}){let{t:s}=U(),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(!1),f=Df(e.rgba),p=Ef(e.color_name,e.rgba,e.color_name_is_synthesized),m=e.core_weight&&e.core_weight>0?e.core_weight:$0e(),h=t===null?null:Math.round(Math.max(0,t)),g=h===null?null:Math.round(Math.max(0,h-m)),_=Math.round(e.label_weight||1e3),v=g===null?null:Math.min(100,Math.round(g/_*100)),b=v===null?`#808080`:v>50?`#22c55e`:v>20?`#eab308`:`#ef4444`,x=Math.max(0,(e.label_weight||0)-(e.weight_used||0))+m,S=h===null?null:h-x,C=S===null?null:Math.abs(S)<=50,w=async()=>{if(t!==null){l(!0);try{await Dd.updateSpoolWeight(e.id,Math.round(t)),d(!0),r?.(),setTimeout(()=>d(!1),3e3)}catch(e){console.error(`Failed to sync weight:`,e)}finally{l(!1)}}};return(0,G.jsxs)(`div`,{className:`flex flex-col items-center space-y-4 max-w-md`,children:[(0,G.jsxs)(`div`,{className:`flex items-start gap-5`,children:[(0,G.jsxs)(`div`,{className:`relative shrink-0`,children:[(0,G.jsx)(W9,{color:f,isEmpty:!1,size:100}),v!==null&&(0,G.jsxs)(`div`,{className:`absolute -bottom-2 -right-2 px-2 py-0.5 rounded-full text-xs font-bold text-white shadow-lg`,style:{backgroundColor:b},children:[v,`%`]})]}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0 pt-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-zinc-100`,children:p||s(`spoolbuddy.spool.unknownColor`)}),(0,G.jsxs)(`span`,{className:`text-xs font-mono text-zinc-500 shrink-0`,children:[`#`,e.id]})]}),(0,G.jsxs)(`p`,{className:`text-sm text-zinc-400`,children:[e.brand,` • `,e.material,e.subtype&&` ${e.subtype}`]}),g!==null&&(0,G.jsxs)(`div`,{className:`mt-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-baseline gap-2`,children:[(0,G.jsxs)(`span`,{className:`text-3xl font-bold font-mono text-zinc-100`,children:[g,`g`]}),(0,G.jsxs)(`span`,{className:`text-sm text-zinc-500`,children:[`/ `,_,`g`]})]}),(0,G.jsx)(`p`,{className:`text-xs text-zinc-500 mt-0.5`,children:s(`spoolbuddy.spool.remaining`,`Remaining`)}),(0,G.jsx)(`div`,{className:`mt-2 max-w-xs`,children:(0,G.jsx)(`div`,{className:`h-2 bg-zinc-700 rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full transition-all duration-500`,style:{width:`${v}%`,backgroundColor:b}})})})]})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-x-6 gap-y-2 text-sm bg-zinc-800 rounded-lg p-4 w-full`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:s(`spoolbuddy.dashboard.grossWeight`,`Gross weight`)}),(0,G.jsx)(`span`,{className:`font-mono text-zinc-300`,children:h===null?`—`:`${h}g`})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:s(`spoolbuddy.spool.coreWeight`,`Core`)}),(0,G.jsxs)(`span`,{className:`font-mono text-zinc-300`,children:[m,`g`]})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:s(`spoolbuddy.dashboard.spoolSize`,`Spool size`)}),(0,G.jsxs)(`span`,{className:`font-mono text-zinc-300`,children:[_,`g`]})]}),(0,G.jsxs)(`div`,{className:`flex justify-between items-center`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:s(`spoolbuddy.spool.scaleWeight`,`Scale`)}),h===null?(0,G.jsx)(`span`,{className:`text-zinc-500`,children:`—`}):(0,G.jsxs)(`span`,{className:`flex items-center gap-1 font-mono ${C?`text-green-500`:`text-yellow-500`}`,children:[h,`g`,C?(0,G.jsx)(fs,{className:`w-3.5 h-3.5`}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Iu,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`button`,{onClick:w,className:`p-1 hover:bg-green-500/20 rounded transition-colors text-green-500`,title:s(`spoolbuddy.dashboard.syncWeight`,`Sync Weight`),children:(0,G.jsx)(Vl,{className:`w-4 h-4`})})]})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-between items-center`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:s(`spoolbuddy.dashboard.tagId`,`Tag`)}),(0,G.jsx)(`span`,{className:`font-mono text-xs text-zinc-400 truncate max-w-[120px]`,title:e.tag_uid||``,children:e.tag_uid?e.tag_uid.slice(-8):`—`})]})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 justify-center`,children:[i&&(0,G.jsx)(`button`,{onClick:a?void 0:i,disabled:!!a,className:`px-5 py-2.5 rounded-lg text-sm font-medium bg-green-600 text-white hover:bg-green-700 transition-colors min-h-[44px] disabled:opacity-50 disabled:cursor-not-allowed`,children:s(`spoolbuddy.modal.assignToAms`,`Assign to AMS`)}),o&&(0,G.jsxs)(`button`,{onClick:o,className:`px-5 py-2.5 rounded-lg text-sm font-medium bg-red-600/20 text-red-400 hover:bg-red-600/30 transition-colors min-h-[44px]`,children:[(0,G.jsx)(zu,{className:`w-4 h-4 inline mr-1`}),s(`inventory.unassignSpool`)]}),(0,G.jsx)(`button`,{onClick:w,disabled:t===null||c,className:`px-5 py-2.5 rounded-lg text-sm font-medium transition-colors min-h-[44px] ${u?`bg-green-600/20 text-green-400`:i?`bg-zinc-700 text-zinc-300 hover:bg-zinc-600 disabled:opacity-40 disabled:cursor-not-allowed`:`bg-green-600 text-white hover:bg-green-700 disabled:opacity-40 disabled:cursor-not-allowed`}`,children:c?`...`:u?s(`spoolbuddy.dashboard.weightSynced`,`Synced!`):s(`spoolbuddy.dashboard.syncWeight`,`Sync Weight`)}),n&&(0,G.jsx)(`button`,{onClick:n,className:`px-5 py-2.5 rounded-lg text-sm font-medium bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors min-h-[44px]`,children:s(`spoolbuddy.dashboard.close`,`Close`)})]})]})}function t2e({tagUid:e,scaleWeight:t,coreWeight:n,onLinkSpool:r,onAddToInventory:i,onClose:a}){let{t:o}=U(),s=n??$0e(),c=t===null?null:Math.round(Math.max(0,t)),l=c===null?null:Math.round(Math.max(0,c-s));return(0,G.jsxs)(`div`,{className:`flex flex-col items-center text-center space-y-5`,children:[(0,G.jsx)(`div`,{className:`w-20 h-20 rounded-2xl bg-green-500/15 flex items-center justify-center`,children:(0,G.jsx)(`svg`,{className:`w-10 h-10 text-green-500`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:`2`,d:`M7 7h.01M7 3h5c.512 0 1.024.195 1.414.586l7 7a2 2 0 010 2.828l-7 7a2 2 0 01-2.828 0l-7-7A2 2 0 013 12V7a4 4 0 014-4z`})})}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-zinc-100`,children:o(`spoolbuddy.dashboard.newTag`,`New Tag Detected`)}),(0,G.jsx)(`p`,{className:`text-sm text-zinc-500 font-mono mt-1`,children:e})]}),c!==null&&(0,G.jsxs)(`div`,{className:`text-sm text-zinc-400`,children:[(0,G.jsxs)(`span`,{className:`font-mono font-semibold`,children:[c,`g`]}),` `,o(`spoolbuddy.dashboard.onScale`,`on scale`),l!==null&&l>0&&(0,G.jsxs)(`span`,{className:`text-zinc-500`,children:[` • ~`,l,`g filament`]})]}),(0,G.jsxs)(`div`,{className:`flex flex-wrap gap-2 justify-center`,children:[i&&(0,G.jsx)(`button`,{onClick:i,className:`px-5 py-2.5 rounded-lg text-sm font-medium bg-green-600 text-white hover:bg-green-700 transition-colors min-h-[44px]`,children:o(`spoolbuddy.modal.addToInventory`,`Add to Inventory`)}),r&&(0,G.jsxs)(`button`,{onClick:r,className:`px-5 py-2.5 rounded-lg text-sm font-medium bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors min-h-[44px]`,children:[(0,G.jsx)(`svg`,{className:`w-4 h-4 inline-block mr-1.5 -mt-0.5`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:`2`,d:`M13.828 10.172a4 4 0 00-5.656 0l-4 4a4 4 0 105.656 5.656l1.102-1.101m-.758-4.899a4 4 0 005.656 0l4-4a4 4 0 00-5.656-5.656l-1.1 1.1`})}),o(`inventory.assignSpool`,`Assign Spool`)]}),a&&(0,G.jsx)(`button`,{onClick:a,className:`px-5 py-2.5 rounded-lg text-sm font-medium bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors min-h-[44px]`,children:o(`spoolbuddy.dashboard.close`,`Close`)})]})]})}function n2e(e){return e?`#${e.slice(0,6)}`:`#808080`}function r2e(e){return!e.tray_type||e.tray_type===``}function i2e(e){if(e.tray_type)return null;if(e.exists===!0)return`reset`;if(e.exists===!1)return`physical`;let t=e.state??null;return t===9||t===10?`physical`:`reset`}function a2e(e){return e<=3?`AMS ${String.fromCharCode(65+e)}`:e>=128&&e<=135?`AMS HT ${String.fromCharCode(65+e-128)}`:`AMS ${e}`}function o2e({className:e}){return(0,G.jsx)(`svg`,{className:e,viewBox:`0 0 36 54`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:(0,G.jsx)(`path`,{d:`M17.8131 0.00538C18.4463 -0.15091 20.3648 3.14642 20.8264 3.84781C25.4187 10.816 35.3089 26.9368 35.9383 34.8694C37.4182 53.5822 11.882 61.3357 2.53721 45.3789C-1.73471 38.0791 0.016 32.2049 3.178 25.0232C6.99221 16.3662 12.6411 7.90372 17.8131 0.00538ZM18.3738 7.24807L17.5881 7.48441C14.4452 12.9431 10.917 18.2341 8.19369 23.9368C4.6808 31.29 1.18317 38.5479 7.69403 45.5657C17.3058 55.9228 34.9847 46.8808 31.4604 32.8681C29.2558 24.0969 22.4207 15.2913 18.3776 7.24807H18.3738Z`,fill:`#C3C2C1`})})}function s2e({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 35 53`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`path`,{d:`M17.3165 0.0038C17.932 -0.14959 19.7971 3.08645 20.2458 3.77481C24.7103 10.6135 34.3251 26.4346 34.937 34.2198C36.3757 52.5848 11.5505 60.1942 2.46584 44.534C-1.68714 37.3735 0.0148 31.6085 3.08879 24.5603C6.79681 16.0605 12.2884 7.75907 17.3165 0.0038ZM17.8615 7.11561L17.0977 7.34755C14.0423 12.7048 10.6124 17.8974 7.96483 23.4941C4.54975 30.7107 1.14949 37.8337 7.47908 44.721C16.8233 54.8856 34.01 46.0117 30.5838 32.2595C28.4405 23.6512 21.7957 15.0093 17.8652 7.11561H17.8615Z`,fill:`#C3C2C1`}),(0,G.jsx)(`path`,{d:`M5.03547 30.112C9.64453 30.4936 11.632 35.7985 16.4154 35.791C19.6339 35.7873 20.2161 33.2283 22.3853 31.6197C31.6776 24.7286 33.5835 37.4894 27.9881 44.4254C18.1878 56.5653 -1.16063 44.6013 5.03917 30.1158L5.03547 30.112Z`,fill:`#1F8FEB`})]})}function c2e({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 36 54`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`path`,{d:`M17.9625 4.48059L4.77216 26.3154L2.08228 40.2175L10.0224 50.8414H23.1594L33.3246 42.1693V30.2455L17.9625 4.48059Z`,fill:`#1F8FEB`}),(0,G.jsx)(`path`,{d:`M17.7948 0.00538C18.4273 -0.15091 20.3438 3.14642 20.8048 3.84781C25.3921 10.816 35.2715 26.9368 35.9001 34.8694C37.3784 53.5822 11.8702 61.3357 2.53562 45.3789C-1.73163 38.0829 0.0134 32.2087 3.1757 25.027C6.98574 16.3662 12.6284 7.90372 17.7948 0.00538ZM18.3549 7.24807L17.57 7.48441C14.4306 12.9431 10.9063 18.2341 8.1859 23.9368C4.67686 31.29 1.18305 38.5479 7.68679 45.5657C17.2881 55.9228 34.9476 46.8808 31.4271 32.8681C29.2249 24.0969 22.3974 15.2913 18.3587 7.24807H18.3549Z`,fill:`#C3C2C1`})]})}function l2e({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 12 20`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`path`,{d:`M6 0.5C4.6 0.5 3.5 1.6 3.5 3V12.1C2.6 12.8 2 13.9 2 15C2 17.2 3.8 19 6 19C8.2 19 10 17.2 10 15C10 13.9 9.4 12.8 8.5 12.1V3C8.5 1.6 7.4 0.5 6 0.5Z`,stroke:`#C3C2C1`,strokeWidth:`1`,fill:`none`}),(0,G.jsx)(`circle`,{cx:`6`,cy:`15`,r:`2.5`,stroke:`#C3C2C1`,strokeWidth:`1`,fill:`none`})]})}function u2e({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 12 20`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`rect`,{x:`4.5`,y:`8`,width:`3`,height:`4.5`,fill:`#d4a017`,rx:`0.5`}),(0,G.jsx)(`circle`,{cx:`6`,cy:`15`,r:`2`,fill:`#d4a017`}),(0,G.jsx)(`path`,{d:`M6 0.5C4.6 0.5 3.5 1.6 3.5 3V12.1C2.6 12.8 2 13.9 2 15C2 17.2 3.8 19 6 19C8.2 19 10 17.2 10 15C10 13.9 9.4 12.8 8.5 12.1V3C8.5 1.6 7.4 0.5 6 0.5Z`,stroke:`#C3C2C1`,strokeWidth:`1`,fill:`none`})]})}function d2e({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 12 20`,fill:`none`,xmlns:`http://www.w3.org/2000/svg`,children:[(0,G.jsx)(`rect`,{x:`4.5`,y:`3`,width:`3`,height:`9.5`,fill:`#c62828`,rx:`0.5`}),(0,G.jsx)(`circle`,{cx:`6`,cy:`15`,r:`2`,fill:`#c62828`}),(0,G.jsx)(`path`,{d:`M6 0.5C4.6 0.5 3.5 1.6 3.5 3V12.1C2.6 12.8 2 13.9 2 15C2 17.2 3.8 19 6 19C8.2 19 10 17.2 10 15C10 13.9 9.4 12.8 8.5 12.1V3C8.5 1.6 7.4 0.5 6 0.5Z`,stroke:`#C3C2C1`,strokeWidth:`1`,fill:`none`})]})}function f2e({humidity:e,goodThreshold:t=40,fairThreshold:n=60}){let r,i;return e<=t?(r=`#22a352`,i=o2e):e<=n?(r=`#d4a017`,i=s2e):(r=`#c62828`,i=c2e),(0,G.jsxs)(`div`,{className:`flex items-center gap-0.5`,children:[(0,G.jsx)(i,{className:`w-3 h-3.5`}),(0,G.jsxs)(`span`,{className:`font-medium tabular-nums text-xs`,style:{color:r},children:[e,`%`]})]})}function p2e({temp:e,goodThreshold:t=28,fairThreshold:n=35}){let r,i;return e<=t?(r=`#22a352`,i=l2e):e<=n?(r=`#d4a017`,i=u2e):(r=`#c62828`,i=d2e),(0,G.jsxs)(`div`,{className:`flex items-center gap-0.5`,children:[(0,G.jsx)(i,{className:`w-3 h-3.5`}),(0,G.jsxs)(`span`,{className:`font-medium tabular-nums text-xs`,style:{color:r},children:[e,`°C`]})]})}function G9({side:e}){return(0,G.jsx)(`span`,{className:`inline-flex items-center justify-center w-4 h-4 text-[9px] font-bold rounded`,style:{backgroundColor:`#1a4d2e`,color:`#00ae42`},children:e})}function m2e({tray:e,slotIndex:t,isActive:n,fillOverride:r,spoolmanFill:i,onClick:a}){let o=r2e(e),s=i2e(e),c=n2e(e.tray_color),l=e.remain!==null&&e.remain!==void 0&&e.remain>=0?e.remain:null,u=i??(r===0&&l!==null&&l>0?null:r)??l;return(0,G.jsxs)(`div`,{className:`relative flex flex-col items-center p-2.5 rounded-lg transition-all ${n?`ring-2 ring-bambu-green`:``} ${a?`cursor-pointer hover:bg-white/5`:``}`,onClick:a,title:a?`AMS Slot ${t+1}`:void 0,children:[(0,G.jsxs)(`div`,{className:`relative w-16 h-16 mb-1`,children:[o?(0,G.jsx)(`div`,{className:`w-full h-full rounded-full border-2 border-dashed border-gray-500 flex items-center justify-center`,children:(0,G.jsx)(`div`,{className:`w-3 h-3 rounded-full bg-gray-600`})}):(0,G.jsxs)(`svg`,{viewBox:`0 0 56 56`,className:`w-full h-full`,children:[(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`26`,fill:c}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`20`,fill:c,style:{filter:`brightness(0.85)`}}),(0,G.jsx)(`ellipse`,{cx:`20`,cy:`20`,rx:`6`,ry:`4`,fill:`white`,opacity:`0.3`}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`8`,fill:`#2d2d2d`}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`5`,fill:`#1a1a1a`})]}),n&&(0,G.jsx)(`div`,{className:`absolute -bottom-1 left-1/2 -translate-x-1/2 w-2.5 h-2.5 bg-bambu-green rounded-full`})]}),(0,G.jsx)(`span`,{className:`text-sm text-white/70 truncate max-w-full`,title:s===`reset`?`Spool loaded — slot not configured`:void 0,children:o?s===`reset`?`?`:`Empty`:e.tray_type||`Unknown`}),!o&&u!==null&&u>=0&&(0,G.jsx)(`div`,{className:`w-full h-1 bg-bambu-dark-tertiary rounded-full overflow-hidden mt-1`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full transition-all`,style:{width:`${u}%`,backgroundColor:Ap(u)}})}),(0,G.jsx)(`span`,{className:`absolute top-1 right-1 text-xs text-white/30`,children:t+1})]})}function h2e({unit:e,activeSlot:t,onConfigureSlot:n,isDualNozzle:r,nozzleSide:i,thresholds:a,fillOverrides:o,spoolmanFillOverrides:s}){let c=e.tray||[],l=e.is_ams_ht,u=l?1:4;return(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg p-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(`span`,{className:`text-white font-medium text-base`,children:a2e(e.id)}),r&&i&&(0,G.jsx)(G9,{side:i})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[e.temp!=null&&(0,G.jsx)(p2e,{temp:e.temp,goodThreshold:a?.tempGood,fairThreshold:a?.tempFair}),e.humidity!=null&&(0,G.jsx)(f2e,{humidity:e.humidity,goodThreshold:a?.humidityGood,fairThreshold:a?.humidityFair})]})]}),(0,G.jsx)(`div`,{className:`grid ${l?`grid-cols-1 max-w-[100px] mx-auto`:`grid-cols-4`} gap-2`,children:Array.from({length:u}).map((r,i)=>{let a=c[i]||{id:i,tray_color:null,tray_type:``,tray_sub_brands:null,tray_id_name:null,tray_info_idx:null,remain:-1,k:null,cali_idx:null,tag_uid:null,tray_uuid:null,nozzle_temp_min:null,nozzle_temp_max:null};return(0,G.jsx)(m2e,{tray:a,slotIndex:i,isActive:t===i,fillOverride:o?.[`${e.id}-${i}`]??null,spoolmanFill:s?.[`${e.id}-${i}`]??null,onClick:n?()=>n(e.id,i,r2e(a)?null:a):void 0},i)})})]})}function K9(e){return e<=3?`AMS ${String.fromCharCode(65+e)}`:e>=128&&e<=135?`AMS HT ${String.fromCharCode(65+e-128)}`:`AMS ${e}`}function q9(e){return!e.tray_type||e.tray_type===``}function g2e(e){return e?`#${e.slice(0,6)}`:`#808080`}var J9=e=>(e??``).trim().toUpperCase();function _2e(e,t){let n=J9(e),r=J9(t);return!n||!r?`none`:n===r?`exact`:r.includes(n)||n.includes(r)?`partial`:`none`}function v2e(e,t){let n=J9(e),r=J9(t);return!n||!r?!1:n===r}function y2e({isOpen:e,onClose:t,spool:n,printerId:r,spoolmanMode:i=!1}){let{t:a}=U(),o=co(),[s,c]=(0,y.useState)(null),[l,u]=(0,y.useState)(null),[d,f]=(0,y.useState)(!1),[p,m]=(0,y.useState)(null),[h,g]=(0,y.useState)(null);(0,y.useEffect)(()=>{e&&(c(null),u(null),f(!1),m(null),g(null))},[e]);let _=(0,y.useCallback)(e=>{e.key===`Escape`&&t()},[t]);(0,y.useEffect)(()=>(e&&document.addEventListener(`keydown`,_),()=>document.removeEventListener(`keydown`,_)),[e,_]);let{data:v}=K({queryKey:[`printerStatus`,r],queryFn:()=>Z.getPrinterStatus(r),enabled:e&&r!==null,refetchInterval:5e3}),{data:b}=K({queryKey:[`printer`,r],queryFn:()=>Z.getPrinter(r),enabled:e&&r!==null}),{data:x}=K({queryKey:[`settings`],queryFn:()=>Z.getSettings(),enabled:e,staleTime:300*1e3}),{data:S}=K({queryKey:[`spool-assignments`,r],queryFn:()=>Z.getAssignments(r),enabled:e&&r!==null,staleTime:30*1e3}),{data:C=[]}=K({queryKey:[`spoolman-slot-assignments`,r],queryFn:()=>Z.getSpoolmanSlotAssignments(r??void 0),enabled:e&&!!i&&r!==null,staleTime:30*1e3}),w=i?C.find(e=>e.spoolman_spool_id===n.id):void 0,T=(0,y.useMemo)(()=>{let e={};if(!S)return e;for(let t of S){let n=t.spool;if(n&&n.label_weight>0&&n.weight_used!=null){let r=Math.round(Math.max(0,n.label_weight-n.weight_used)/n.label_weight*100);e[`${t.ams_id}-${t.tray_id}`]=r}}return e},[S]),E=x?{humidityGood:Number(x.ams_humidity_good)||40,humidityFair:Number(x.ams_humidity_fair)||60,tempGood:Number(x.ams_temp_good)||28,tempFair:Number(x.ams_temp_fair)||35}:void 0,D=v?.connected??!1,O=(0,y.useMemo)(()=>v?.ams??[],[v?.ams]),k=(0,y.useMemo)(()=>O.filter(e=>!e.is_ams_ht),[O]),A=(0,y.useMemo)(()=>O.filter(e=>e.is_ams_ht),[O]),j=(0,y.useMemo)(()=>[...v?.vt_tray??[]].sort((e,t)=>(e.id??254)-(t.id??254)),[v?.vt_tray]),M=b?.nozzle_count===2||v?.temperatures?.nozzle_2!==void 0,N=(0,y.useRef)({});(0,y.useEffect)(()=>{v?.ams_extruder_map&&Object.keys(v.ams_extruder_map).length>0&&(N.current=v.ams_extruder_map)},[v?.ams_extruder_map]);let P=v?.ams_extruder_map&&Object.keys(v.ams_extruder_map).length>0?v.ams_extruder_map:N.current,F=v?.fila_switch?.installed===!0,I=(0,y.useCallback)(e=>{if(!M)return null;let t=P[String(e)];return t===void 0?F?null:(e>=128?e-128:e)===1?`L`:`R`:t===1?`L`:`R`},[M,P,F]),L=q({mutationFn:async({amsId:e,trayId:t})=>{if(!r)throw Error(`No printer selected`);return i?await Z.assignSpoolmanSlot({spoolman_spool_id:n.id,printer_id:r,ams_id:e,tray_id:t}):await Z.assignSpool({spool_id:n.id,printer_id:r,ams_id:e,tray_id:t})},onSuccess:e=>{u(`success`);let n=e&&`pending_config`in e&&e.pending_config;c(n?a(`spoolbuddy.modal.assignPendingInsert`,`Assigned. Slot will configure when you insert the spool.`):a(`spoolbuddy.modal.assignSuccess`,`Assigned!`)),o.invalidateQueries({queryKey:[`slotPresets`]}),o.invalidateQueries({queryKey:[`spoolman-slot-assignments`]}),o.invalidateQueries({queryKey:[`spoolman-slot-assignments-all`]}),setTimeout(()=>t(),n?2500:1500)},onError:e=>{u(`error`),c(e instanceof Error?e.message:a(`spoolbuddy.modal.assignError`,`Failed to assign spool.`))}}),R=L.isPending,z=(0,y.useCallback)((e,t)=>{if(e===254||e===255){let n=e===254?254:254+t;return j.find(e=>(e.id??254)===n)||null}return O.find(t=>t.id===e)?.tray?.find(e=>e.id===t)||null},[O,j]),B=(0,y.useCallback)((e,t)=>e<=3?`${K9(e)} ${a(`ams.slot`,`Slot`)} ${t+1}`:e>=128&&e<=135?K9(e):e===254?a(`printers.extL`,`Ext-L`):M?a(`printers.extR`,`Ext-R`):a(`printers.ext`,`Ext`),[a,M]),V=(0,y.useCallback)((e,t)=>{u(`info`),c(a(`spoolbuddy.modal.assigning`,`Configuring slot...`)),L.mutate({amsId:e,trayId:t})},[L,a]),ee=(0,y.useCallback)((e,t)=>{if(!R){if(!x?.disable_filament_warnings){let r=z(e,t);if(r&&!q9(r)){let i=r.tray_sub_brands||r.tray_type||``,a=_2e(n.material,i),o=n.slicer_filament_name||n.slicer_filament,s=r.tray_type||``,c=v2e(o,s);if(a!==`exact`){let r;r=a===`none`&&!c?`material_profile`:a===`partial`&&!c?`partial_profile`:a===`none`?`material`:`partial`;let l=B(e,t);g({amsId:e,trayId:t}),m({type:r,spoolMaterial:n.material||``,trayMaterial:i||``,spoolProfile:o||void 0,trayProfile:s||void 0,location:l}),f(!0);return}}}V(e,t)}},[R,x?.disable_filament_warnings,n,z,B,V]),te=(0,y.useCallback)(()=>{h&&(f(!1),m(null),V(h.amsId,h.trayId),g(null))},[h,V]),ne=(0,y.useMemo)(()=>{let e=[];for(let t of A){let n=t.tray?.[0]||{id:0,tray_color:null,tray_type:``,tray_sub_brands:null,tray_id_name:null,tray_info_idx:null,remain:-1,k:null,cali_idx:null,tag_uid:null,tray_uuid:null,nozzle_temp_min:null,nozzle_temp_max:null},r=T[`${t.id}-0`]??null,i=n.remain!=null&&n.remain>=0?n.remain:null,a=r===0&&i!==null&&i>0?null:r;e.push({key:`ht-${t.id}`,label:K9(t.id),amsId:t.id,trayId:0,tray:n,isEmpty:q9(n),nozzleSide:I(t.id),effectiveFill:a??i})}for(let t of j){let n=t.id??254,r=n-254,i=T[`255-${r}`]??null,o=t.remain!=null&&t.remain>=0?t.remain:null,s=i===0&&o!==null&&o>0?null:i;e.push({key:`ext-${n}`,label:M?n===254?a(`printers.extL`,`Ext-L`):a(`printers.extR`,`Ext-R`):a(`printers.ext`,`Ext`),amsId:255,trayId:r,tray:t,isEmpty:q9(t),nozzleSide:M?n===254?`L`:`R`:null,effectiveFill:s??o})}return e},[A,j,M,a,I,T]);return e?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`fixed inset-0 z-[60] bg-bambu-dark flex flex-col`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-5 py-3 border-b border-zinc-800 shrink-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 min-w-0`,children:[(0,G.jsx)(`div`,{className:`w-7 h-7 rounded-full shrink-0`,style:kf(n.rgba)}),(0,G.jsx)(`div`,{className:`min-w-0`,children:(0,G.jsxs)(`h2`,{className:`text-sm font-semibold text-zinc-100 truncate`,children:[a(`spoolbuddy.modal.assignToAmsTitle`,`Assign to AMS`),(0,G.jsxs)(`span`,{className:`font-normal text-zinc-500 ml-2`,children:[Ef(n.color_name,n.rgba,n.color_name_is_synthesized)||a(`spoolbuddy.spool.unknownColor`),` `,`• `,n.brand,` `,n.material,n.subtype&&` ${n.subtype}`]}),(0,G.jsxs)(`span`,{className:`text-[10px] font-mono text-zinc-500 ml-2 shrink-0`,children:[`#`,n.id]})]})})]}),(0,G.jsx)(`button`,{onClick:t,disabled:R,className:`p-2 rounded-lg text-zinc-500 hover:text-zinc-300 hover:bg-zinc-800 transition-colors shrink-0 disabled:opacity-50`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),s&&(0,G.jsxs)(`div`,{className:`mx-5 mt-3 p-3 rounded-lg flex items-center gap-3 border shrink-0 ${l===`info`?`bg-blue-500/10 border-blue-500/40`:l===`success`?`bg-green-500/10 border-green-500/40`:`bg-red-500/10 border-red-500/40`}`,children:[l===`info`&&(0,G.jsx)(Y,{className:`w-4 h-4 text-blue-400 animate-spin shrink-0`}),l===`success`&&(0,G.jsx)(xs,{className:`w-4 h-4 text-green-400 shrink-0`}),l===`error`&&(0,G.jsx)(Ds,{className:`w-4 h-4 text-red-400 shrink-0`}),(0,G.jsx)(`span`,{className:`text-sm ${l===`info`?`text-blue-300`:l===`success`?`text-green-300`:`text-red-300`}`,children:s})]}),(0,G.jsx)(`div`,{className:`flex-1 flex flex-col gap-3 p-4 min-h-0 overflow-y-auto`,children:!D&&r?(0,G.jsx)(`div`,{className:`flex-1 flex items-center justify-center`,children:(0,G.jsx)(`div`,{className:`text-center text-white/50`,children:(0,G.jsx)(`p`,{className:`text-lg mb-2`,children:a(`spoolbuddy.ams.printerDisconnected`,`Printer disconnected`)})})}):O.length===0&&j.length===0?(0,G.jsx)(`div`,{className:`flex-1 flex items-center justify-center`,children:(0,G.jsxs)(`div`,{className:`text-center text-white/50`,children:[(0,G.jsx)(qc,{className:`w-12 h-12 mx-auto mb-3 opacity-50`}),(0,G.jsx)(`p`,{className:`text-lg mb-2`,children:a(`spoolbuddy.ams.noData`,`No AMS detected`)}),(0,G.jsx)(`p`,{className:`text-sm`,children:a(`spoolbuddy.ams.connectAms`,`Connect an AMS to see filament slots`)})]})}):(0,G.jsxs)(G.Fragment,{children:[k.length>0&&(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-3 flex-1 min-h-0`,children:k.map(e=>(0,G.jsx)(h2e,{unit:e,activeSlot:w?.ams_id===e.id?w.tray_id??null:null,onConfigureSlot:(t,n)=>ee(e.id,n),isDualNozzle:M,nozzleSide:I(e.id),thresholds:E,fillOverrides:T},e.id))}),ne.length>0&&(0,G.jsx)(`div`,{className:`flex gap-2 shrink-0`,children:ne.map(({key:e,label:t,amsId:n,trayId:r,tray:i,isEmpty:a,nozzleSide:o,effectiveFill:s})=>{let c=g2e(i.tray_color);return(0,G.jsxs)(`div`,{onClick:()=>ee(n,r),className:`bg-bambu-dark-secondary rounded-lg px-3 py-2 cursor-pointer hover:bg-bambu-dark-secondary/80 transition-all flex items-center gap-2 ${w&&w.ams_id===n&&w.tray_id===r?`ring-2 ring-bambu-green`:``} ${R?`opacity-50 pointer-events-none`:``}`,children:[(0,G.jsx)(`div`,{className:`relative w-10 h-10 shrink-0`,children:a?(0,G.jsx)(`div`,{className:`w-full h-full rounded-full border-2 border-dashed border-gray-500 flex items-center justify-center`,children:(0,G.jsx)(`div`,{className:`w-1.5 h-1.5 rounded-full bg-gray-600`})}):(0,G.jsxs)(`svg`,{viewBox:`0 0 56 56`,className:`w-full h-full`,children:[(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`26`,fill:c}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`20`,fill:c,style:{filter:`brightness(0.85)`}}),(0,G.jsx)(`ellipse`,{cx:`20`,cy:`20`,rx:`6`,ry:`4`,fill:`white`,opacity:`0.3`}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`8`,fill:`#2d2d2d`}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`5`,fill:`#1a1a1a`})]})}),(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`span`,{className:`text-xs text-white/50 font-medium`,children:t}),o&&(0,G.jsx)(G9,{side:o})]}),(0,G.jsx)(`div`,{className:`text-sm text-white/80 truncate`,children:a?`Empty`:i.tray_type||`?`})]}),!a&&s!=null&&s>=0&&(0,G.jsx)(`div`,{className:`w-1.5 h-8 bg-bambu-dark-tertiary rounded-full overflow-hidden shrink-0 flex flex-col-reverse`,children:(0,G.jsx)(`div`,{className:`w-full rounded-full`,style:{height:`${s}%`,backgroundColor:Ap(s)}})})]},e)})})]})}),(0,G.jsx)(`div`,{className:`flex justify-end gap-3 px-5 py-3 border-t border-zinc-800 shrink-0`,children:(0,G.jsx)(`button`,{onClick:t,disabled:R,className:`px-5 py-2.5 rounded-lg text-sm font-medium bg-zinc-800 text-zinc-300 hover:bg-zinc-700 transition-colors min-h-[44px] disabled:opacity-50`,children:l===`success`?a(`spoolbuddy.dashboard.close`,`Close`):a(`spoolbuddy.modal.cancel`,`Cancel`)})})]}),d&&p&&(()=>{let e=``;return p.type===`material`?e=a(`inventory.assignMismatchMessage`,{spoolMaterial:p.spoolMaterial,trayMaterial:p.trayMaterial,location:p.location}):p.type===`partial`?e=a(`inventory.assignPartialMismatchMessage`,{spoolMaterial:p.spoolMaterial,trayMaterial:p.trayMaterial,location:p.location}):p.type===`material_profile`?e=`${a(`inventory.assignMismatchMessage`,{spoolMaterial:p.spoolMaterial,trayMaterial:p.trayMaterial,location:p.location})}\n\n${a(`inventory.assignProfileMismatchMessage`,{spoolProfile:p.spoolProfile||a(`common.unknown`),trayProfile:p.trayProfile||a(`common.unknown`),location:p.location})}`:p.type===`partial_profile`&&(e=`${a(`inventory.assignPartialMismatchMessage`,{spoolMaterial:p.spoolMaterial,trayMaterial:p.trayMaterial,location:p.location})}\n\n${a(`inventory.assignProfileMismatchMessage`,{spoolProfile:p.spoolProfile||a(`common.unknown`),trayProfile:p.trayProfile||a(`common.unknown`),location:p.location})}`),e=`${e}\n\n${a(`inventory.assignReconfigureNote`)}`,(0,G.jsx)(rf,{title:a(`inventory.assignMismatchTitle`),message:e,confirmText:a(`inventory.assignMismatchConfirm`),variant:`warning`,isLoading:L.isPending,onConfirm:te,onCancel:()=>{L.isPending||(f(!1),g(null),m(null))}})})()]}):null}function b2e({isOpen:e,onClose:t,tagId:n,untaggedSpools:r,onLink:i}){let{t:a}=U(),[o,s]=(0,y.useState)(null),c=(0,y.useCallback)(()=>{s(null),t()},[t]),l=(0,y.useCallback)(e=>{e.key===`Escape`&&c()},[c]);return(0,y.useEffect)(()=>(e&&(document.addEventListener(`keydown`,l),document.body.style.overflow=`hidden`),()=>{document.removeEventListener(`keydown`,l),document.body.style.overflow=``}),[e,l]),e?(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/70 animate-fade-in`,onClick:c,children:(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-xl shadow-2xl w-full max-w-lg mx-4 animate-slide-up`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-5 py-4 border-b border-zinc-700`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`h2`,{className:`text-base font-semibold text-zinc-100`,children:a(`spoolbuddy.dashboard.linkTagTitle`,`Link Tag to Spool`)}),(0,G.jsx)(`p`,{className:`text-sm text-zinc-500 font-mono`,children:n})]}),(0,G.jsx)(`button`,{onClick:c,className:`p-2 rounded-lg text-zinc-500 hover:text-zinc-300 hover:bg-zinc-700 transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`px-5 py-4 space-y-3 max-h-[400px] overflow-y-auto`,children:[(0,G.jsx)(`p`,{className:`text-sm text-zinc-400`,children:a(`spoolbuddy.dashboard.selectSpool`,`Select a spool to link this tag to:`)}),r.length===0?(0,G.jsx)(`div`,{className:`text-center py-8 text-zinc-500`,children:a(`spoolbuddy.dashboard.noUntagged`,`No spools without tags found`)}):(0,G.jsx)(`div`,{className:`space-y-2`,children:r.map(e=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>s(e),className:`w-full flex items-center gap-3 p-3 rounded-lg border-2 transition-all text-left ${o?.id===e.id?`border-green-500 bg-green-500/10`:`border-zinc-700 hover:border-green-500/50 hover:bg-zinc-700/50`}`,children:[(0,G.jsx)(W9,{color:Df(e.rgba),isEmpty:!1,size:40}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`div`,{className:`font-medium text-zinc-100 truncate`,children:Ef(e.color_name,e.rgba,e.color_name_is_synthesized)||a(`spoolbuddy.spool.unknownColor`)}),(0,G.jsxs)(`span`,{className:`text-[10px] font-mono text-zinc-500 shrink-0`,children:[`#`,e.id]})]}),(0,G.jsxs)(`div`,{className:`text-sm text-zinc-400 truncate`,children:[e.brand,` • `,e.material,e.subtype&&` ${e.subtype}`]})]}),(0,G.jsxs)(`div`,{className:`text-sm font-mono text-zinc-500`,children:[Math.max(0,e.label_weight-e.weight_used),`g`]})]},e.id))})]}),(0,G.jsxs)(`div`,{className:`flex justify-end gap-2 px-5 py-4 border-t border-zinc-700`,children:[(0,G.jsx)(`button`,{onClick:c,className:`px-4 py-2.5 rounded-lg text-sm font-medium bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors min-h-[44px]`,children:a(`common.cancel`,`Cancel`)}),(0,G.jsx)(`button`,{onClick:()=>{o&&(i(o),s(null))},disabled:!o,className:`px-4 py-2.5 rounded-lg text-sm font-medium bg-green-600 text-white hover:bg-green-700 disabled:opacity-40 disabled:cursor-not-allowed transition-colors min-h-[44px]`,children:a(`spoolbuddy.dashboard.linkTag`,`Link Tag`)})]})]})}):null}function x2e(e){return e?e.replace(/[^0-9a-f]/gi,``).toUpperCase():``}function S2e(e,t){let n=x2e(e),r=x2e(t);return!n||!r?!1:n===r?!0:n.endsWith(r)||r.endsWith(n)}var C2e=[`#00AE42`,`#FF6B35`,`#3B82F6`,`#EF4444`,`#A855F7`,`#FBBF24`,`#14B8A6`,`#EC4899`,`#F97316`,`#22C55E`];function w2e(){let{t:e}=U(),[t,n]=(0,y.useState)(0);(0,y.useEffect)(()=>{let e=setInterval(()=>{n(e=>(e+1)%C2e.length)},5e3);return()=>clearInterval(e)},[]);let r=C2e[t];return(0,G.jsxs)(`div`,{className:`flex flex-col items-center text-center`,children:[(0,G.jsxs)(`div`,{className:`relative mb-6 flex items-center justify-center`,style:{width:160,height:160},children:[(0,G.jsx)(`div`,{className:`absolute inset-0 flex items-center justify-center pointer-events-none`,children:[0,1].map(e=>(0,G.jsx)(`div`,{className:`absolute rounded-full border spoolbuddy-optimized-ping`,style:{width:80,height:80,borderColor:`${r}4D`,transition:`border-color 140ms linear`,animationDelay:`${e*.8}s`}},e))}),(0,G.jsxs)(`div`,{className:`relative overflow-hidden rounded-full`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 rounded-full opacity-30 spoolbuddy-spool-glow`,style:{background:`radial-gradient(circle, ${r} 0%, transparent 70%)`}}),(0,G.jsx)(`div`,{className:`relative`,style:{transition:`opacity 140ms linear`},children:(0,G.jsx)(W9,{color:r,isEmpty:!1,size:100})})]})]}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xl font-medium text-zinc-300`,children:e(`spoolbuddy.dashboard.readyToScan`,`Ready to scan`)}),(0,G.jsx)(`p`,{className:`text-sm text-zinc-500`,children:e(`spoolbuddy.dashboard.idleMessage`,`Place a spool on the scale to identify it`)})]}),(0,G.jsxs)(`div`,{className:`mt-6 flex items-center gap-2 text-sm text-zinc-600`,children:[(0,G.jsx)(`svg`,{className:`w-4 h-4`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:`2`,d:`M13 16h-1v-4h-1m1-4h.01M21 12a9 9 0 11-18 0 9 9 0 0118 0z`})}),(0,G.jsx)(`span`,{children:e(`spoolbuddy.dashboard.nfcHint`,`NFC tag will be read automatically`)})]})]})}function T2e(){let{t:e}=U();return(0,G.jsxs)(`div`,{className:`flex flex-col items-center text-center`,children:[(0,G.jsx)(`div`,{className:`relative mb-6 flex items-center justify-center`,style:{width:160,height:160},children:(0,G.jsx)(`div`,{className:`w-24 h-24 rounded-full bg-zinc-800 flex items-center justify-center`,children:(0,G.jsx)(`svg`,{className:`w-12 h-12 text-zinc-600`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:`1.5`,d:`M18.364 5.636a9 9 0 010 12.728m0 0l-12.728-12.728m12.728 12.728L5.636 5.636m12.728 0a9 9 0 00-12.728 0m0 12.728a9 9 0 010-12.728`})})})}),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-lg font-medium text-zinc-500`,children:e(`spoolbuddy.status.deviceOffline`,`Device Offline`)}),(0,G.jsx)(`p`,{className:`text-sm text-zinc-600`,children:e(`spoolbuddy.status.connectDisplay`,`Connect the SpoolBuddy display to scan spools`)})]}),(0,G.jsxs)(`div`,{className:`mt-6 flex items-center gap-2 text-xs text-zinc-600`,children:[(0,G.jsx)(`svg`,{className:`w-4 h-4`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:`2`,d:`M8.111 16.404a5.5 5.5 0 017.778 0M12 20h.01m-7.08-7.071c3.904-3.905 10.236-3.905 14.14 0M1.394 9.393c5.857-5.857 15.355-5.857 21.213 0`})}),(0,G.jsx)(`span`,{children:e(`spoolbuddy.status.waitingConnection`,`Waiting for device connection...`)})]})]})}function E2e(){let{sbState:e,selectedPrinterId:t}=lr(),{t:n}=U(),{showToast:r}=Gd(),{data:i}=K({queryKey:[`spoolman-settings`],queryFn:Z.getSpoolmanSettings,staleTime:300*1e3}),a=i?.spoolman_enabled===`true`&&!!i?.spoolman_url,{data:o=[],refetch:s}=K({queryKey:a?[`spoolman-inventory-spools`]:[`inventory-spools`],queryFn:()=>a?Z.getSpoolmanInventorySpools(!1):Z.getSpools(!1),enabled:i!==void 0}),{data:c=[]}=K({queryKey:[`spoolman-slot-assignments`],queryFn:()=>Z.getSpoolmanSlotAssignments(),enabled:a,staleTime:3*1e3,refetchInterval:3*1e3,refetchIntervalInBackground:!1}),{data:l=[]}=K({queryKey:[`printers`],queryFn:()=>Z.getPrinters()}),u=Co({queries:l.map(e=>({queryKey:[`printerStatus`,e.id],queryFn:()=>Z.getPrinterStatus(e.id),refetchInterval:1e4,select:e=>({connected:e?.connected,awaiting_plate_clear:e?.awaiting_plate_clear===!0})}))}),d=l.map((e,t)=>({printer:e,pending:u[t]?.data?.awaiting_plate_clear===!0})).filter(e=>e.pending),f=co(),p=q({mutationFn:e=>Z.clearPlate(e),onSuccess:(e,t)=>{f.setQueryData([`printerStatus`,t],e=>e&&{...e,awaiting_plate_clear:!1}),r(n(`spoolbuddy.dashboard.plateClearedToast`,`Plate marked as cleared`),`success`)},onError:()=>{r(n(`spoolbuddy.dashboard.plateClearFailed`,`Could not mark plate as cleared`),`error`)}}),m=q({mutationFn:e=>Z.unassignSpoolmanSlot(e),onSuccess:()=>{f.invalidateQueries({queryKey:[`spoolman-slot-assignments`]}),f.invalidateQueries({queryKey:[`spoolman-inventory-spools`]})},onError:()=>r(n(`inventory.unassignFailed`,`Failed to unassign spool`),`error`)}),[h,g]=(0,y.useState)(null),[_,v]=(0,y.useState)(null),[b,x]=(0,y.useState)(null),[S,C]=(0,y.useState)(!1),[w,T]=(0,y.useState)(!1),[E,D]=(0,y.useState)(!1),[O,k]=(0,y.useState)(!1),[A,j]=(0,y.useState)(null),M=e.matchedSpool?.tag_uid??e.unknownTagUid??null,N=e.weight,P=e.weightStable,F=(0,y.useRef)(null);N===null?F.current=null:(F.current===null||Math.abs(N-F.current)>=3||P)&&(F.current=N);let I=F.current,L=(0,y.useMemo)(()=>{if(e.matchedSpool?.id){let t=o.find(t=>t.id===e.matchedSpool?.id);if(t)return t}return h&&(o.find(e=>S2e(e.tag_uid,h))||A)||null},[h,e.matchedSpool,o,A]),R=(0,y.useMemo)(()=>{if(L&&!A)return L;let t=e.matchedSpool;return t?{id:t.id,tag_uid:t.tag_uid,material:t.material,subtype:t.subtype,color_name:t.color_name,color_name_is_synthesized:t.color_name_is_synthesized,rgba:t.rgba,brand:t.brand,label_weight:t.label_weight,core_weight:t.core_weight,weight_used:t.weight_used}:null},[L,A,e.matchedSpool]),z=a&&R!=null?c.some(e=>e.spoolman_spool_id===R.id):!1,B=(0,y.useMemo)(()=>a?o.filter(e=>!e.tag_uid&&!e.tray_uuid&&!e.archived_at):o.filter(e=>!e.tag_uid&&!e.archived_at),[o,a]);(0,y.useEffect)(()=>{if(M){let e=b===M;(h!==null&&h!==M||!e&&h!==M)&&(g(M),v(null),x(null),j(null)),!e&&N!==null&&P&&v(Math.round(Math.max(0,N)))}else b&&(g(null),x(null),v(null),j(null))},[M,N,P,h,b]);let V=()=>{x(h)},ee=async t=>{if(h)try{if(a){let i=e.unknownTagUid||void 0,a=!e.unknownTagUid&&e.unknownTrayUuid?e.unknownTrayUuid:void 0;if(!i&&!a){r(n(`spoolman.linkFailed`),`error`);return}let o=await Z.linkTagToSpoolmanSpool(t.id,{tray_uuid:a,tag_uid:i});if(!o){r(n(`spoolman.linkFailed`),`error`);return}let{id:s,material:c,subtype:l,color_name:u,color_name_is_synthesized:d,rgba:f,brand:p,label_weight:m,core_weight:h,weight_used:g}=o;j({id:s,material:c,subtype:l,color_name:u,color_name_is_synthesized:d,rgba:f,brand:p,label_weight:m,core_weight:h,weight_used:g}),r(n(`spoolman.linkSuccess`),`success`)}else await Z.linkTagToSpool(t.id,{tag_uid:h,tag_type:`generic`,data_origin:`nfc_link`});s()}catch(e){console.error(`Failed to link tag:`,e);let t=e instanceof od&&e.status===409&&e.code===`tag_already_linked`?e.detail?.spool_id:void 0;r(typeof t==`number`?n(`inventory.tagAlreadyLinked`,{id:t}):n(`spoolman.linkFailed`),`error`)}finally{C(!1)}},te=async()=>{if(h){k(!0);try{let t=ne??_;if(a){let n=await Z.createSpoolmanInventorySpool({material:`PLA`,subtype:null,color_name:null,rgba:null,extra_colors:null,effect_type:null,brand:null,label_weight:1e3,core_weight:250,core_weight_catalog_id:null,weight_used:0,slicer_filament:null,slicer_filament_name:null,nozzle_temp_min:null,nozzle_temp_max:null,note:null,added_full:null,last_used:null,encode_time:null,tag_uid:null,tray_uuid:null,data_origin:null,tag_type:null,cost_per_kg:null,last_scale_weight:t===null?null:Math.round(t),last_weighed_at:t===null?null:new Date().toISOString(),category:null,low_stock_threshold_pct:null});await Z.linkTagToSpoolmanSpool(n.id,{tag_uid:e.unknownTagUid||void 0,tray_uuid:!e.unknownTagUid&&e.unknownTrayUuid?e.unknownTrayUuid:void 0})}else await Z.createSpool({material:`PLA`,subtype:null,color_name:null,rgba:null,extra_colors:null,effect_type:null,brand:null,label_weight:1e3,core_weight:250,core_weight_catalog_id:null,weight_used:0,slicer_filament:null,slicer_filament_name:null,nozzle_temp_min:null,nozzle_temp_max:null,note:null,added_full:null,last_used:null,encode_time:null,tag_uid:h,tray_uuid:null,data_origin:`spoolbuddy`,tag_type:`generic`,cost_per_kg:null,last_scale_weight:t===null?null:Math.round(t),last_weighed_at:t===null?null:new Date().toISOString(),category:null,low_stock_threshold_pct:null})}catch(e){let t=e instanceof Error?e.message:String(e);console.error(`Failed to quick-add spool:`,t),r(t||n(`spoolbuddy.errors.quickAddFailed`,`Failed to add spool`),`error`)}finally{D(!1),k(!1),s()}}},ne=N!==null&&(M===h||M===null&&h!==null)?N:null,re=o.length,ie=new Set(o.map(e=>e.material)).size,ae=new Set(o.filter(e=>e.brand).map(e=>e.brand)).size;return(0,G.jsxs)(`div`,{className:`h-full flex flex-col p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-6 px-4 py-1.5 bg-zinc-800/50 rounded-xl border border-zinc-700/50 mb-3 shrink-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-xl font-bold text-zinc-100`,children:re}),(0,G.jsx)(`span`,{className:`text-sm text-zinc-500`,children:n(`spoolbuddy.inventory.spools`,`Spools`)})]}),(0,G.jsx)(`div`,{className:`w-px h-5 bg-zinc-700`}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-xl font-bold text-zinc-100`,children:ie}),(0,G.jsx)(`span`,{className:`text-sm text-zinc-500`,children:n(`spoolbuddy.spool.material`,`Materials`)})]}),(0,G.jsx)(`div`,{className:`w-px h-5 bg-zinc-700`}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-xl font-bold text-zinc-100`,children:ae}),(0,G.jsx)(`span`,{className:`text-sm text-zinc-500`,children:n(`spoolbuddy.spool.brand`,`Brands`)})]})]}),(0,G.jsxs)(`div`,{className:`flex-1 flex gap-4 min-h-0`,children:[(0,G.jsxs)(`div`,{className:`w-5/12 flex flex-col min-h-0`,children:[(0,G.jsxs)(`div`,{className:`border border-dashed border-zinc-700/50 rounded-xl p-4`,children:[(0,G.jsx)(`h2`,{className:`text-sm font-semibold text-zinc-400 uppercase tracking-wide mb-3`,children:n(`spoolbuddy.dashboard.device`,`Device`)}),(0,G.jsxs)(`div`,{className:`space-y-2.5`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-2.5 h-2.5 rounded-full ${e.deviceOnline?`bg-green-500`:`bg-red-500`}`}),(0,G.jsx)(`span`,{className:`text-base text-zinc-400`,children:e.deviceOnline?n(`spoolbuddy.status.online`,`Online`):n(`spoolbuddy.status.offline`,`Disconnected`)})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-3 bg-zinc-800/50 rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`svg`,{className:`w-4 h-4 ${e.deviceOnline?`text-green-500`:`text-zinc-500`}`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:`2`,d:`M3 6l3 1m0 0l-3 9a5.002 5.002 0 006.001 0M6 7l3 9M6 7l6-2m6 2l3-1m-3 1l-3 9a5.002 5.002 0 006.001 0M18 7l3 9m-3-9l-6-2m0-2v2m0 16V5m0 16H9m3 0h3`})}),(0,G.jsx)(`span`,{className:`text-sm text-zinc-500`,children:n(`spoolbuddy.spool.scaleWeight`,`Scale`)})]}),(0,G.jsx)(`span`,{className:`text-lg font-mono font-semibold text-zinc-100`,children:I===null?`—`:`${Math.abs(I)<=20?0:Math.round(Math.max(0,I))}g`})]}),(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-3 bg-zinc-800/50 rounded-lg`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`svg`,{className:`w-4 h-4 ${e.deviceOnline?`text-green-500`:`text-zinc-500`}`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:`2`,d:`M7 7h.01M7 3h5c.512 0 1.024.195 1.414.586l7 7a2 2 0 010 2.828l-7 7a2 2 0 01-2.828 0l-7-7A2 2 0 013 12V7a4 4 0 014-4z`})}),(0,G.jsx)(`span`,{className:`text-sm text-zinc-500`,children:`NFC`})]}),(0,G.jsx)(`span`,{className:`text-sm font-medium ${M?`text-green-500`:`text-zinc-500`}`,children:M?n(`spoolbuddy.dashboard.tagDetected`,`Tag detected`):n(`spoolbuddy.dashboard.noTag`,`No tag`)})]})]})]}),l.length>0&&(0,G.jsxs)(`div`,{className:`mt-3 border border-dashed border-zinc-700/50 rounded-xl p-4`,children:[(0,G.jsx)(`h2`,{className:`text-sm font-semibold text-zinc-400 uppercase tracking-wide mb-2.5`,children:n(`spoolbuddy.dashboard.printers`,`Printers`)}),(0,G.jsx)(`div`,{className:`flex flex-wrap gap-2 overflow-hidden`,children:l.map((e,t)=>{let n=u[t]?.data?.connected??!1;return(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5 px-2.5 py-1 bg-zinc-800/50 rounded-lg`,title:`${e.name} — ${n?`Online`:`Offline`}`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full shrink-0 ${n?`bg-green-500`:`bg-zinc-600`}`}),(0,G.jsx)(`span`,{className:`text-xs text-zinc-400 truncate max-w-[100px]`,children:e.name})]},e.id)})}),d.length>0&&(0,G.jsx)(`div`,{className:`mt-2 flex flex-wrap gap-2`,"data-testid":`plate-clear-section`,"aria-label":n(`spoolbuddy.dashboard.plateReadyLabel`,`Plates ready to clear`),children:d.map(({printer:e})=>(0,G.jsxs)(`button`,{type:`button`,onClick:()=>p.mutate(e.id),disabled:p.isPending,"data-testid":`plate-clear-button-${e.id}`,title:n(`spoolbuddy.dashboard.plateReady`,`Plate ready: {{name}}`,{name:e.name}),className:`flex items-center gap-1.5 px-2.5 py-1 rounded-lg bg-amber-500/10 hover:bg-amber-500/20 active:bg-amber-500/30 border border-amber-500/30 text-amber-200 transition-colors disabled:opacity-60 disabled:cursor-wait`,children:[(0,G.jsxs)(`svg`,{className:`w-3 h-3 shrink-0`,viewBox:`0 0 24 24`,fill:`none`,stroke:`currentColor`,strokeWidth:`2.5`,strokeLinecap:`round`,strokeLinejoin:`round`,"aria-hidden":`true`,children:[(0,G.jsx)(`path`,{d:`M12 9v4`}),(0,G.jsx)(`path`,{d:`M12 17h.01`}),(0,G.jsx)(`path`,{d:`M10.29 3.86 1.82 18a2 2 0 0 0 1.71 3h16.94a2 2 0 0 0 1.71-3L13.71 3.86a2 2 0 0 0-3.42 0z`})]}),(0,G.jsx)(`span`,{className:`text-xs truncate max-w-[100px]`,children:e.name}),(0,G.jsx)(`span`,{className:`text-xs opacity-70`,"aria-hidden":`true`,children:`·`}),(0,G.jsx)(`span`,{className:`text-xs font-medium`,children:n(`spoolbuddy.dashboard.plateClearAction`,`Clear`)})]},e.id))})]})]}),(0,G.jsx)(`div`,{className:`w-7/12 min-h-0`,children:(0,G.jsxs)(`div`,{className:`border border-dashed border-zinc-700/50 rounded-xl p-6 h-full flex flex-col`,children:[(0,G.jsx)(`h2`,{className:`text-sm font-semibold text-zinc-400 uppercase tracking-wide mb-4 shrink-0`,children:n(`spoolbuddy.dashboard.currentSpool`,`Current Spool`)}),(0,G.jsx)(`div`,{className:`flex-1 flex items-center justify-center min-h-0`,children:e.deviceOnline?(L||e.matchedSpool)&&h&&b!==h?(0,G.jsx)(e2e,{spool:(()=>{let t=L??e.matchedSpool;return{id:t.id,tag_uid:h,material:t.material,subtype:t.subtype,color_name:t.color_name,color_name_is_synthesized:t.color_name_is_synthesized,rgba:t.rgba,brand:t.brand,label_weight:t.label_weight,core_weight:t.core_weight,weight_used:t.weight_used}})(),scaleWeight:ne??_,onSyncWeight:()=>s(),onAssignToAms:()=>T(!0),isAssigned:z,onUnassignFromAms:z&&L?.id!=null?()=>m.mutate(L.id):void 0,onClose:V}):M&&h&&!L&&!e.matchedSpool&&b!==h?(0,G.jsx)(t2e,{tagUid:h,scaleWeight:ne??_,onLinkSpool:B.length>0?()=>C(!0):void 0,onAddToInventory:()=>D(!0),onClose:V}):(0,G.jsx)(w2e,{}):(0,G.jsx)(T2e,{})})]})})]}),R&&!A&&h&&(0,G.jsx)(y2e,{isOpen:w,onClose:()=>T(!1),spool:R,printerId:t,spoolmanMode:a}),h&&(0,G.jsx)(b2e,{isOpen:S,onClose:()=>C(!1),tagId:h,untaggedSpools:B,onLink:ee}),E&&h&&(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/60`,children:(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-2xl p-6 mx-4 max-w-sm w-full border border-zinc-700`,children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-zinc-100 mb-3`,children:n(`spoolbuddy.modal.addToInventory`,`Add to Inventory`)}),(0,G.jsxs)(`div`,{className:`flex gap-2.5 p-3 bg-amber-500/10 border border-amber-500/20 rounded-lg mb-4`,children:[(0,G.jsx)(`svg`,{className:`w-5 h-5 text-amber-500 shrink-0 mt-0.5`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:`2`,d:`M13 16h-1v-4h-1m1-4h.01M21 12a9 9 0 11-18 0 9 9 0 0118 0z`})}),(0,G.jsx)(`p`,{className:`text-sm text-amber-200/80`,children:n(`spoolbuddy.modal.quickAddHint`,`For best results, add the spool in the Bambuddy web interface first (with material, color, brand), then use "Assign Spool" here to assign the NFC tag.`)})]}),(0,G.jsx)(`p`,{className:`text-sm text-zinc-400 mb-1`,children:n(`spoolbuddy.modal.quickAddDesc`,`This will create a basic PLA spool entry with this NFC tag. You can edit the details later in Bambuddy.`)}),(0,G.jsx)(`p`,{className:`text-xs text-zinc-500 font-mono mb-5`,children:h}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(`button`,{onClick:()=>D(!1),className:`flex-1 px-4 py-2.5 rounded-lg text-sm font-medium bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors min-h-[44px]`,children:n(`common.cancel`,`Cancel`)}),(0,G.jsx)(`button`,{onClick:te,disabled:O,className:`flex-1 px-4 py-2.5 rounded-lg text-sm font-medium bg-green-600 text-white hover:bg-green-700 disabled:opacity-50 transition-colors min-h-[44px]`,children:O?n(`common.saving`,`Saving...`):n(`spoolbuddy.modal.addAnyway`,`Add Anyway`)})]})]})})]})}function D2e(e){let t=Ef(e.color_name,e.rgba,e.color_name_is_synthesized);return t?` - ${t}`:``}function O2e(e){return e<=3?`AMS ${String.fromCharCode(65+e)}`:e>=128&&e<=135?`AMS HT ${String.fromCharCode(65+e-128)}`:`AMS ${e}`}function k2e(e){return e?{O1D:`H2D`,O1E:`H2D Pro`,O2D:`H2D Pro`,O1C:`H2C`,O1C2:`H2C`,O1S:`H2S`,"BL-P001":`X1C`,"BL-P002":`X1`,"BL-P003":`X1E`,N6:`X2D`,N9:`A2L`,C11:`P1S`,C12:`P1P`,C13:`P2S`,N2S:`A1`,N1:`A1 Mini`,X1C:`X1C`,X1:`X1`,X1E:`X1E`,X2D:`X2D`,P1S:`P1S`,P1P:`P1P`,P2S:`P2S`,A1:`A1`,"A1 Mini":`A1 Mini`,A2L:`A2L`,H2D:`H2D`,"H2D Pro":`H2D Pro`,H2C:`H2C`,H2S:`H2S`}[e]||e:``}function Y9(e){return!e.tray_type||e.tray_type===``}function A2e(e){return e?`#${e.slice(0,6)}`:`#808080`}function j2e(){let{selectedPrinterId:e,setAlert:t}=lr(),{t:n}=U(),r=co(),{showToast:i}=Gd(),{data:a}=K({queryKey:[`printerStatus`,e],queryFn:()=>Z.getPrinterStatus(e),enabled:e!==null,staleTime:30*1e3}),{data:o}=K({queryKey:[`printer`,e],queryFn:()=>Z.getPrinter(e),enabled:e!==null,staleTime:60*1e3}),{data:s}=K({queryKey:[`slotPresets`,e],queryFn:()=>Z.getSlotPresets(e),enabled:e!==null,staleTime:120*1e3}),{data:c}=K({queryKey:[`settings`],queryFn:()=>Z.getSettings(),staleTime:300*1e3}),{data:l}=K({queryKey:[`spoolman-status`],queryFn:Z.getSpoolmanStatus,staleTime:60*1e3}),u=l?.enabled&&l?.connected,{data:d}=K({queryKey:[`linked-spools`],queryFn:Z.getLinkedSpools,enabled:!!u,staleTime:30*1e3}),f=d?.linked,{data:p=[]}=K({queryKey:[`spoolman-slot-assignments-all`],queryFn:()=>Z.getSpoolmanSlotAssignments(),enabled:!!u,staleTime:30*1e3}),{data:m=[]}=K({queryKey:[`spoolman-inventory-spools`],queryFn:()=>Z.getSpoolmanInventorySpools(!1),enabled:!!u,staleTime:30*1e3}),{data:h}=K({queryKey:[`spool-assignments`,e],queryFn:()=>Z.getAssignments(e),enabled:e!==null,staleTime:30*1e3}),g=(0,y.useMemo)(()=>{let e={};if(!h)return e;for(let t of h){let n=t.spool;if(n&&n.label_weight>0&&n.weight_used!=null){let r=Math.round(Math.max(0,n.label_weight-n.weight_used)/n.label_weight*100);e[`${t.ams_id}-${t.tray_id}`]=r}}return e},[h]),_=o?.serial_number??``,v=(0,y.useCallback)((t,n,r)=>{if(e!==null&&p.length&&m.length){let r=p.find(r=>r.printer_id===e&&r.ams_id===t&&r.tray_id===n);if(r){let e=m.find(e=>e.id===r.spoolman_spool_id);if(e&&(e.label_weight??0)>0)return Math.round(Math.max(0,e.label_weight-e.weight_used)/e.label_weight*100)}}if(f&&_){let e=(r?.tray_uuid||r?.tag_uid||Pp(_,t,n))?.toUpperCase(),i=jp(e?f[e]:void 0);if(i!==null)return i}return null},[f,_,e,p,m]),b=a?.connected??!1,x=(0,y.useRef)({});(0,y.useEffect)(()=>{e&&a?.ams&&a.ams.length>0&&(x.current[e]=a.ams)},[a?.ams,e]);let S=(0,y.useMemo)(()=>{let t=a?.ams;return t&&t.length>0?t:(e?x.current[e]:null)??[]},[a?.ams,e]),C=(0,y.useMemo)(()=>S.filter(e=>!e.is_ams_ht),[S]),w=(0,y.useMemo)(()=>S.filter(e=>e.is_ams_ht),[S]),T=(0,y.useMemo)(()=>{let e={};if(!f||!_)return e;for(let t of C)for(let n=0;n<(t.tray?.length??0);n++){let r=t.tray[n],i=v(t.id,n,Y9(r)?null:r);i!==null&&(e[`${t.id}-${n}`]=i)}return e},[f,_,C,v]),E=(0,y.useRef)(void 0),D=a?.tray_now;D!==void 0&&D!==255?E.current=D:D===255&&(E.current=void 0);let O=D!==void 0&&D!==255?D:E.current,k=o?.nozzle_count===2||a?.temperatures?.nozzle_2!==void 0,A=(0,y.useMemo)(()=>[...a?.vt_tray??[]].sort((e,t)=>(e.id??254)-(t.id??254)),[a?.vt_tray]),j=c?{humidityGood:Number(c.ams_humidity_good)||40,humidityFair:Number(c.ams_humidity_fair)||60,tempGood:Number(c.ams_temp_good)||28,tempFair:Number(c.ams_temp_fair)||35}:void 0,M=(0,y.useRef)({});(0,y.useEffect)(()=>{a?.ams_extruder_map&&Object.keys(a.ams_extruder_map).length>0&&(M.current=a.ams_extruder_map)},[a?.ams_extruder_map]);let N=a?.ams_extruder_map&&Object.keys(a.ams_extruder_map).length>0?a.ams_extruder_map:M.current,P=(0,y.useCallback)(e=>{if(!k)return null;let t=N[String(e)],n=e>=128?e-128:e;return(t===void 0?n:t)===1?`L`:`R`},[k,N]),[F,I]=(0,y.useState)(null),[L,R]=(0,y.useState)(null),[z,B]=(0,y.useState)(null),[V,ee]=(0,y.useState)(null),te=(0,y.useCallback)((e,t)=>h?.find(n=>n.ams_id===Number(e)&&n.tray_id===Number(t)),[h]),ne=(0,y.useCallback)((e,t,n)=>{if(!f||!_)return;let r=(n?.tray_uuid||n?.tag_uid||Pp(_,e,t))?.toUpperCase();return r?f[r]:void 0},[f,_]),re=q({mutationFn:({printerId:e,amsId:t,trayId:n})=>Z.unassignSpool(e,t,n),onSuccess:()=>{r.invalidateQueries({queryKey:[`spool-assignments`,e]}),r.invalidateQueries({queryKey:[`spool-assignments`]}),i(n(`inventory.unassignSuccess`,`Spool unassigned`),`success`),R(null)}}),ie=q({mutationFn:e=>Z.unlinkSpool(e),onSuccess:e=>{i(n(`spoolman.unlinkSuccess`)||e?.message,`success`),r.invalidateQueries({queryKey:[`linked-spools`]}),r.invalidateQueries({queryKey:[`unlinked-spools`]}),r.invalidateQueries({queryKey:[`spoolman-slot-assignments`]}),r.invalidateQueries({queryKey:[`spoolman-slot-assignments-all`]}),r.invalidateQueries({queryKey:[`spoolman-inventory-spools`]}),R(null)},onError:e=>{i(e.message||n(`spoolman.unlinkFailed`),`error`)}}),ae=q({mutationFn:e=>Z.unassignSpoolmanSlot(e),onSuccess:()=>{i(n(`inventory.unassignSuccess`,`Spool unassigned`),`success`),r.invalidateQueries({queryKey:[`spoolman-slot-assignments`]}),r.invalidateQueries({queryKey:[`spoolman-slot-assignments-all`]}),r.invalidateQueries({queryKey:[`spoolman-inventory-spools`]}),r.invalidateQueries({queryKey:[`unlinked-spools`]}),r.invalidateQueries({queryKey:[`linked-spools`]}),R(null)},onError:e=>{i(e.message||n(`inventory.assignFailed`,`Failed to unassign spool`),`error`)}}),oe=(0,y.useCallback)(e=>O===void 0?null:e<=3&&Math.floor(O/4)===e?O%4:e>=128&&e<=135&&O===kp(e,0,!1)?0:null,[O]),se=(0,y.useCallback)((e,t,n)=>{let r=kp(e,t,!1),i=s?.[r],a=N[String(e)],o=e>=128?e-128:e,c=a===void 0?o:a;R({amsId:e,trayId:t,trayCount:n&&e>=128?1:4,tray:n,trayType:n?.tray_type||void 0,trayColor:n?.tray_color||void 0,traySubBrands:n?.tray_sub_brands||void 0,trayInfoIdx:n?.tray_info_idx||void 0,extruderId:k?c:void 0,caliIdx:n?.cali_idx,savedPresetId:i?.preset_id,location:`${O2e(e)} Slot ${t+1}`})},[s,N,k]),H=(0,y.useCallback)(e=>{let t=e.id??254,n=t-254,r=s?.[1020+n];R({amsId:255,trayId:n,trayCount:1,tray:Y9(e)?null:e,trayType:e.tray_type||void 0,trayColor:e.tray_color||void 0,traySubBrands:e.tray_sub_brands||void 0,trayInfoIdx:e.tray_info_idx||void 0,extruderId:k?+(t===254):void 0,caliIdx:e.cali_idx,savedPresetId:r?.preset_id,location:k?t===254?`Ext-L`:`Ext-R`:`External`})},[s,k]),ce=(0,y.useCallback)(()=>{if(!L)return;let{tray:e,location:t,...n}=L;R(null),I(n)},[L]),le=(0,y.useCallback)(()=>{if(!L||!e)return;let{amsId:t,trayId:n,trayType:r,trayColor:i,location:a}=L;R(null),B({printerId:e,amsId:t,trayId:n,trayInfo:{type:r||``,material:r,color:i?.slice(0,6)||``,location:a}})},[L,e]),ue=(0,y.useCallback)(()=>{if(!L||!e)return;let{amsId:t,trayId:n,tray:r}=L,i=(r?.tray_uuid||r?.tag_uid||Pp(_,t,n))?.toUpperCase()||``;R(null),ee({tagUid:r?.tag_uid||i,trayUuid:r?.tray_uuid||``,printerId:e,amsId:t,trayId:n})},[L,e,_]),de=(0,y.useCallback)(()=>{if(!L||!e)return;let{amsId:t,trayId:n}=L;re.mutate({printerId:e,amsId:t,trayId:n})},[L,e,re]);(0,y.useEffect)(()=>{if(!b&&e){t({type:`warning`,message:n(`spoolbuddy.ams.printerDisconnected`,`Printer disconnected`)});return}for(let e of S){let n=e.tray||[];for(let r=0;r<n.length;r++){let i=n[r];if(i.remain!==null&&i.remain>=0&&i.remain<15&&i.tray_type){let n=e.id===254||e.id===255,a=!n&&e.id>=128,o=Op(e.id,r,a,n);t({type:`warning`,message:`Low Filament: ${i.tray_type} (${o}) - ${i.remain}% remaining`});return}}}t(null)},[S,b,e,t,n]);let fe=(0,y.useMemo)(()=>{let e=[];for(let t of w){let n=t.tray?.[0]||{id:0,tray_color:null,tray_type:``,tray_sub_brands:null,tray_id_name:null,tray_info_idx:null,remain:-1,k:null,cali_idx:null,tag_uid:null,tray_uuid:null,nozzle_temp_min:null,nozzle_temp_max:null},r=v(t.id,0,Y9(n)?null:n),i=g[`${t.id}-0`]??null,a=n.remain!=null&&n.remain>=0?n.remain:null,o=i===0&&a!==null&&a>0?null:i;e.push({key:`ht-${t.id}`,label:O2e(t.id),tray:n,isEmpty:Y9(n),isActive:oe(t.id)===0,temp:t.temp,humidity:t.humidity,nozzleSide:P(t.id),effectiveFill:r??o??a,onClick:()=>se(t.id,0,Y9(n)?null:n)})}for(let t of A){let r=t.id??254,i=k&&O===254?r===254&&a?.active_extruder===1||r===255&&a?.active_extruder===0:O===r,o=r-254,s=v(255,o,Y9(t)?null:t),c=g[`255-${o}`]??null,l=t.remain!=null&&t.remain>=0?t.remain:null,u=c===0&&l!==null&&l>0?null:c;e.push({key:`ext-${r}`,label:k?r===254?n(`printers.extL`,`Ext-L`):n(`printers.extR`,`Ext-R`):n(`printers.ext`,`Ext`),tray:t,isEmpty:Y9(t),isActive:i,nozzleSide:null,effectiveFill:s??u??l,onClick:()=>H(t)})}return e},[w,A,k,O,a?.active_extruder,n,oe,P,se,H,g,v]);return(0,G.jsxs)(`div`,{className:`h-full flex flex-col p-4`,children:[(0,G.jsx)(`div`,{className:`flex-1 min-h-0`,children:e?b?S.length===0&&A.length===0?(0,G.jsx)(`div`,{className:`flex-1 flex items-center justify-center h-full`,children:(0,G.jsxs)(`div`,{className:`text-center text-white/50`,children:[(0,G.jsx)(qc,{className:`w-12 h-12 mx-auto mb-3 opacity-50`}),(0,G.jsx)(`p`,{className:`text-lg mb-2`,children:n(`spoolbuddy.ams.noData`,`No AMS detected`)}),(0,G.jsx)(`p`,{className:`text-sm`,children:n(`spoolbuddy.ams.connectAms`,`Connect an AMS to see filament slots`)})]})}):(0,G.jsxs)(`div`,{className:`flex flex-col gap-3 h-full`,children:[(0,G.jsx)(`div`,{className:`grid grid-cols-1 md:grid-cols-2 gap-3`,children:C.map(e=>(0,G.jsx)(h2e,{unit:e,activeSlot:oe(e.id),onConfigureSlot:se,isDualNozzle:k,nozzleSide:P(e.id),thresholds:j,fillOverrides:g,spoolmanFillOverrides:T},e.id))}),fe.length>0&&(0,G.jsx)(`div`,{className:`grid grid-cols-2 md:grid-cols-4 gap-3`,children:fe.map(({key:e,label:t,tray:n,isEmpty:r,isActive:i,temp:a,humidity:o,nozzleSide:s,effectiveFill:c,onClick:l})=>{let u=A2e(n.tray_color);return(0,G.jsxs)(`div`,{className:`bg-bambu-dark-secondary rounded-lg px-3 py-2 cursor-pointer hover:bg-bambu-dark-secondary/80 transition-all flex items-center gap-3 ${i?`ring-2 ring-bambu-green`:``}`,onClick:l,children:[(0,G.jsxs)(`div`,{className:`relative w-10 h-10 flex-shrink-0`,children:[r?(0,G.jsx)(`div`,{className:`w-full h-full rounded-full border-2 border-dashed border-gray-500 flex items-center justify-center`,children:(0,G.jsx)(`div`,{className:`w-1.5 h-1.5 rounded-full bg-gray-600`})}):(0,G.jsxs)(`svg`,{viewBox:`0 0 56 56`,className:`w-full h-full`,children:[(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`26`,fill:u}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`20`,fill:u,style:{filter:`brightness(0.85)`}}),(0,G.jsx)(`ellipse`,{cx:`20`,cy:`20`,rx:`6`,ry:`4`,fill:`white`,opacity:`0.3`}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`8`,fill:`#2d2d2d`}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`5`,fill:`#1a1a1a`})]}),i&&(0,G.jsx)(`div`,{className:`absolute -bottom-0.5 left-1/2 -translate-x-1/2 w-1.5 h-1.5 bg-bambu-green rounded-full`})]}),(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-1`,children:[(0,G.jsx)(`span`,{className:`text-xs text-white/50 font-medium truncate`,children:t}),s&&(0,G.jsx)(G9,{side:s})]}),(0,G.jsx)(`div`,{className:`text-sm text-white/80 truncate`,children:r?`Empty`:n.tray_type||`?`}),(a!=null||o!=null)&&(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[a!=null&&(0,G.jsx)(p2e,{temp:a,goodThreshold:j?.tempGood,fairThreshold:j?.tempFair}),o!=null&&(0,G.jsx)(f2e,{humidity:o,goodThreshold:j?.humidityGood,fairThreshold:j?.humidityFair})]})]}),!r&&c!=null&&c>=0&&(0,G.jsx)(`div`,{className:`w-1.5 h-8 bg-bambu-dark-tertiary rounded-full overflow-hidden flex-shrink-0 flex flex-col-reverse`,children:(0,G.jsx)(`div`,{className:`w-full rounded-full`,style:{height:`${c}%`,backgroundColor:Ap(c)}})})]},e)})})]}):(0,G.jsx)(`div`,{className:`flex-1 flex items-center justify-center h-full`,children:(0,G.jsx)(`div`,{className:`text-center text-white/50`,children:(0,G.jsx)(`p`,{className:`text-lg mb-2`,children:n(`spoolbuddy.ams.printerDisconnected`,`Printer disconnected`)})})}):(0,G.jsx)(`div`,{className:`flex-1 flex items-center justify-center h-full`,children:(0,G.jsxs)(`div`,{className:`text-center text-white/50`,children:[(0,G.jsx)(`p`,{className:`text-lg mb-2`,children:n(`spoolbuddy.ams.noPrinter`,`No printer selected`)}),(0,G.jsx)(`p`,{className:`text-sm`,children:n(`spoolbuddy.ams.selectPrinter`,`Select a printer from the top bar`)})]})})}),F&&e&&(0,G.jsx)(_W,{isOpen:!!F,onClose:()=>I(null),printerId:e,slotInfo:F,printerModel:k2e(o?.model??null)||void 0,nozzleDiameter:aee(a,F.amsId),fullScreen:!0,onSuccess:()=>{r.invalidateQueries({queryKey:[`slotPresets`,e]}),r.invalidateQueries({queryKey:[`printerStatus`,e]})}}),L&&e&&(()=>{let t=te(L.amsId,L.trayId),r=ne(L.amsId,L.trayId,L.tray),i=u?p.find(t=>t.printer_id===e&&t.ams_id===L.amsId&&t.tray_id===L.trayId):void 0,a=i?m.find(e=>e.id===i.spoolman_spool_id)??null:null;return(0,G.jsxs)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 bg-black/60 backdrop-blur-sm`,onClick:()=>R(null)}),(0,G.jsxs)(`div`,{className:`relative w-full max-w-sm mx-4 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-2xl`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between p-4 border-b border-bambu-dark-tertiary`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[L.trayColor&&(0,G.jsx)(`span`,{className:`w-4 h-4 rounded-full border border-black/20`,style:{backgroundColor:`#${L.trayColor.slice(0,6)}`}}),(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:L.location}),L.traySubBrands&&(0,G.jsxs)(`span`,{className:`text-sm text-bambu-gray`,children:[`(`,L.traySubBrands,`)`]})]}),(0,G.jsx)(`button`,{onClick:()=>R(null),className:`p-1 text-bambu-gray hover:text-white rounded transition-colors`,children:(0,G.jsx)(td,{className:`w-5 h-5`})})]}),(0,G.jsxs)(`div`,{className:`p-4 space-y-2`,children:[!u&&t?.spool&&(0,G.jsxs)(`div`,{className:`p-2.5 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary mb-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-1`,children:n(`inventory.assignedSpool`,`Assigned spool`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[t.spool.rgba&&(0,G.jsx)(`span`,{className:`w-3 h-3 rounded-full border border-black/20 flex-shrink-0`,style:kf(t.spool.rgba)}),(0,G.jsxs)(`span`,{className:`text-sm text-white`,children:[t.spool.brand?`${t.spool.brand} `:``,t.spool.material,t.spool.subtype?` ${t.spool.subtype}`:``,D2e(t.spool)]}),(0,G.jsxs)(`span`,{className:`text-[10px] font-mono text-zinc-500 shrink-0 ml-auto`,children:[`#`,t.spool.id]})]})]}),u&&r&&!a&&(0,G.jsxs)(`div`,{className:`p-2.5 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary mb-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-1`,children:n(`spoolman.linkedSpool`,`Linked spool`)}),(0,G.jsx)(`div`,{className:`flex items-center gap-2`,children:(0,G.jsxs)(`span`,{className:`text-sm text-white`,children:[`Spoolman #`,r.id,r.remaining_weight==null?``:` (${Math.round(r.remaining_weight)}g)`]})})]}),u&&a&&(0,G.jsxs)(`div`,{className:`p-2.5 bg-bambu-dark rounded-lg border border-bambu-dark-tertiary mb-3`,children:[(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray mb-1`,children:n(`inventory.assignedSpool`,`Assigned spool`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[a.rgba&&(0,G.jsx)(`span`,{className:`w-3 h-3 rounded-full border border-black/20 flex-shrink-0`,style:kf(a.rgba)}),(0,G.jsxs)(`span`,{className:`text-sm text-white`,children:[a.brand?`${a.brand} `:``,a.material,a.subtype?` ${a.subtype}`:``,D2e(a)]})]})]}),(0,G.jsxs)(`button`,{onClick:ce,className:`w-full flex items-center gap-3 p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary hover:border-bambu-blue transition-colors text-left`,children:[(0,G.jsx)(tu,{className:`w-5 h-5 text-bambu-blue flex-shrink-0`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:n(`configureAmsSlot.title`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`spoolbuddy.ams.configureDesc`,`Set filament preset, K-profile, and color`)})]})]}),!u&&(Vp(L?.tray)?null:t?(0,G.jsxs)(`button`,{onClick:de,disabled:re.isPending,className:`w-full flex items-center gap-3 p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary hover:border-amber-500 transition-colors text-left`,children:[(0,G.jsx)(zu,{className:`w-5 h-5 text-amber-400 flex-shrink-0`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-amber-400 font-medium`,children:n(`inventory.unassignSpool`,`Unassign`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`spoolbuddy.ams.unassignDesc`,`Remove inventory spool from this slot`)})]})]}):(0,G.jsxs)(`button`,{onClick:le,className:`w-full flex items-center gap-3 p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary hover:border-bambu-green transition-colors text-left`,children:[(0,G.jsx)(Sl,{className:`w-5 h-5 text-bambu-green flex-shrink-0`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:n(`inventory.assignSpool`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`spoolbuddy.ams.assignDesc`,`Track a spool from your inventory`)})]})]})),u&&(r?.id?(0,G.jsxs)(`button`,{onClick:()=>ie.mutate(r.id),disabled:ie.isPending,className:`w-full flex items-center gap-3 p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary hover:border-amber-500 transition-colors text-left active:opacity-50`,children:[(0,G.jsx)(zu,{className:`w-5 h-5 text-amber-400 flex-shrink-0`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-amber-400 font-medium`,children:n(`inventory.unassignSpool`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`spoolbuddy.ams.unlinkDesc`,`Remove Spoolman link from this slot`)})]})]}):a?(0,G.jsxs)(`button`,{onClick:()=>ae.mutate(a.id),disabled:ae.isPending,className:`w-full flex items-center gap-3 p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary hover:border-amber-500 transition-colors text-left active:opacity-50`,children:[(0,G.jsx)(zu,{className:`w-5 h-5 text-amber-400 flex-shrink-0`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-amber-400 font-medium`,children:n(`inventory.unassignSpool`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`spoolbuddy.ams.unassignDesc`,`Remove inventory spool from this slot`)})]})]}):(0,G.jsxs)(`button`,{onClick:ue,className:`w-full flex items-center gap-3 p-3 rounded-lg bg-bambu-dark border border-bambu-dark-tertiary hover:border-bambu-green transition-colors text-left`,children:[(0,G.jsx)(Yc,{className:`w-5 h-5 text-bambu-green flex-shrink-0`}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`p`,{className:`text-white font-medium`,children:n(`inventory.assignSpool`)}),(0,G.jsx)(`p`,{className:`text-xs text-bambu-gray`,children:n(`spoolbuddy.ams.linkDesc`,`Link a Spoolman spool to this slot`)})]})]}))]})]})]})})(),z&&(0,G.jsx)(OU,{isOpen:!!z,onClose:()=>{B(null),r.invalidateQueries({queryKey:[`spool-assignments`,e]}),r.invalidateQueries({queryKey:[`spool-assignments`]})},printerId:z.printerId,amsId:z.amsId,trayId:z.trayId,trayInfo:z.trayInfo,spoolmanEnabled:!!u}),V&&(0,G.jsx)(EU,{isOpen:!!V,onClose:()=>ee(null),tagUid:V.tagUid,trayUuid:V.trayUuid,printerId:V.printerId,amsId:V.amsId,trayId:V.trayId})]})}function M2e({type:e,deviceId:t,onClose:n}){let{t:r}=U(),[i,a]=(0,y.useState)(!1),[o,s]=(0,y.useState)(``),[c,l]=(0,y.useState)(``),[u,d]=(0,y.useState)(!1);(0,y.useEffect)(()=>{let e=e=>{e.key===`Escape`&&!i&&n()};return window.addEventListener(`keydown`,e),()=>window.removeEventListener(`keydown`,e)},[i,n]);let f=(0,y.useCallback)(async()=>{a(!0),s(``),l(``),d(!0);try{s(r(`spoolbuddy.diagnostic.queuing`,`Queuing diagnostic on device...
+`)),await Dd.queueDiagnostics(t,e);let n=null,i=0;for(;i<60&&!n;){await new Promise(e=>setTimeout(e,500));try{n=await Dd.getDiagnosticResult(t,e);break}catch{i++,i%4==0&&s(e=>e+`.`)}}if(!n)throw Error(`Diagnostic timed out - device did not report results`);s(n.output),n.success||l(`Exit code: ${n.exit_code}`)}catch(e){l(e instanceof Error?e.message:`Unknown error`),s(``)}finally{a(!1)}},[e,t,r]);return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 flex items-center justify-center bg-black/70 animate-fade-in`,onClick:n,children:(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg shadow-xl w-full max-w-2xl mx-4 max-h-[80vh] flex flex-col animate-slide-up`,onClick:e=>e.stopPropagation(),children:[(0,G.jsxs)(`div`,{className:`flex justify-between items-center p-4 border-b border-zinc-700`,children:[(0,G.jsx)(`h2`,{className:`text-lg font-semibold text-white`,children:e===`scale`?r(`spoolbuddy.diagnostic.scaleTitle`,`Scale Diagnostic`):e===`read_tag`?r(`spoolbuddy.diagnostic.readTagTitle`,`Read Tag Diagnostic`):r(`spoolbuddy.diagnostic.nfcTitle`,`NFC Reader Diagnostic`)}),(0,G.jsx)(`button`,{onClick:n,className:`text-zinc-400 hover:text-white transition-colors`,"aria-label":`Close`,children:(0,G.jsx)(td,{size:20})})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-auto p-4 bg-black/50 font-mono text-sm`,children:i?(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-green-400`,children:[(0,G.jsx)(`div`,{className:`animate-spin w-4 h-4 border-2 border-green-400 border-t-transparent rounded-full`}),(0,G.jsx)(`span`,{children:r(`spoolbuddy.diagnostic.running`,`Running diagnostic on device...`)})]}):o?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`text-green-400 whitespace-pre-wrap break-words`,children:o}),c&&(0,G.jsxs)(`div`,{className:`text-red-400 mt-2`,children:[`❌ `,c]})]}):u?(0,G.jsx)(`div`,{children:c?(0,G.jsxs)(`div`,{className:`text-red-400`,children:[`ERROR: `,c]}):(0,G.jsx)(`span`,{className:`text-green-400`,children:r(`spoolbuddy.diagnostic.completed`,`Diagnostic completed successfully.`)})}):(0,G.jsxs)(`div`,{className:`text-zinc-500`,children:[r(`spoolbuddy.diagnostic.clickStart`,`Click "Run Diagnostic" to start the hardware diagnostic on`),` `,t,`.`]})}),(0,G.jsxs)(`div`,{className:`flex gap-2 p-4 border-t border-zinc-700 bg-zinc-800`,children:[(0,G.jsx)(`button`,{onClick:f,disabled:i,className:`flex-1 flex items-center justify-center gap-2 bg-green-600 hover:bg-green-700 disabled:bg-gray-600 disabled:cursor-not-allowed px-4 py-2 rounded font-semibold text-white transition-colors`,children:i?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`animate-spin w-4 h-4 border-2 border-white border-t-transparent rounded-full`}),r(`spoolbuddy.diagnostic.runningBtn`,`Running...`)]}):u?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Wl,{size:16}),r(`spoolbuddy.diagnostic.runAgain`,`Run Again`)]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Ml,{size:16}),r(`spoolbuddy.diagnostic.runBtn`,`Run Diagnostic`)]})}),(0,G.jsx)(`button`,{onClick:n,className:`px-4 py-2 rounded bg-zinc-700 hover:bg-zinc-600 text-white font-semibold transition-colors`,children:r(`spoolbuddy.diagnostic.close`,`Close`)})]})]})})}function N2e(e){return e<60?`${e}s`:e<3600?`${Math.floor(e/60)}m`:`${Math.floor(e/3600)}h ${Math.floor(e%3600/60)}m`}function P2e(e){if(!e)return`-`;let t=ep(e);return t?t.toLocaleDateString(void 0,{month:`short`,day:`numeric`})+` `+t.toLocaleTimeString(void 0,{hour:`2-digit`,minute:`2-digit`}):`-`}var F2e=[{label:`Off`,value:0},{label:`1m`,value:60},{label:`2m`,value:120},{label:`5m`,value:300},{label:`10m`,value:600},{label:`30m`,value:1800}];function I2e({device:e}){let{t}=U(),[n,r]=(0,y.useState)(null),[i,a]=(0,y.useState)(``),[o,s]=(0,y.useState)(``),[c,l]=(0,y.useState)(!1),[u,d]=(0,y.useState)(null);return(0,y.useEffect)(()=>{!i&&e.backend_url&&a(e.backend_url)},[e.backend_url,i]),(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2`,children:[(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-zinc-300 mb-2`,children:t(`spoolbuddy.settings.nfcReader`,`NFC Reader`)}),(0,G.jsxs)(`div`,{className:`space-y-1.5 text-xs`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.type`,`Type`)}),(0,G.jsx)(`span`,{className:`text-zinc-300 font-mono`,children:e.nfc_reader_type||`N/A`})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.connection`,`Connection`)}),(0,G.jsx)(`span`,{className:`text-zinc-300 font-mono`,children:e.nfc_connection||`N/A`})]}),(0,G.jsxs)(`div`,{className:`flex justify-between items-center`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.status.status`,`Status`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1.5`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full ${e.nfc_ok?`bg-green-500`:e.nfc_reader_type?`bg-red-500`:`bg-zinc-600`}`}),(0,G.jsx)(`span`,{className:e.nfc_ok?`text-green-400`:e.nfc_reader_type?`text-red-400`:`text-zinc-500`,children:e.nfc_ok?t(`spoolbuddy.status.nfcReady`,`Ready`):e.nfc_reader_type?t(`common.error`,`Error`):t(`spoolbuddy.settings.notConnected`,`N/A`)})]})]})]})]}),(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-zinc-300 mb-2`,children:t(`spoolbuddy.settings.deviceInfo`,`Device Info`)}),(0,G.jsxs)(`div`,{className:`space-y-1.5 text-xs`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.hostname`,`Host`)}),(0,G.jsx)(`span`,{className:`text-zinc-300 truncate ml-2`,children:e.hostname})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:`IP`}),(0,G.jsx)(`span`,{className:`text-zinc-300`,children:e.ip_address})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.uptime`,`Uptime`)}),(0,G.jsx)(`span`,{className:`text-zinc-300`,children:N2e(e.uptime_s)})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:`ID`}),(0,G.jsx)(`span`,{className:`text-zinc-400 font-mono truncate ml-2`,children:e.device_id})]})]})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2`,children:[(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3 space-y-2`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-zinc-300`,children:t(`spoolbuddy.settings.systemConfig`,`Backend & Auth`)}),(0,G.jsx)(`input`,{value:i,onChange:e=>a(e.target.value),placeholder:`http://192.168.1.100:5000`,className:`w-full px-2 py-1.5 rounded bg-zinc-900 border border-zinc-700 text-zinc-100 text-xs`}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`input`,{type:`password`,value:o,onChange:e=>s(e.target.value),placeholder:t(`spoolbuddy.settings.apiTokenPlaceholder`,`API token`),className:`flex-1 px-2 py-1.5 rounded bg-zinc-900 border border-zinc-700 text-zinc-100 text-xs`}),(0,G.jsx)(`button`,{onClick:async()=>{if(!i.trim()){d({type:`error`,text:t(`spoolbuddy.settings.systemFieldsRequired`,`Backend URL is required.`)});return}l(!0),d(null);try{await Dd.updateSystemConfig(e.device_id,i.trim(),o.trim()||void 0),d({type:`ok`,text:t(`spoolbuddy.settings.systemQueued`,`Config queued.`)})}catch(e){d({type:`error`,text:e instanceof Error?e.message:t(`common.error`,`Error`)})}finally{l(!1)}},disabled:c,className:`px-3 py-1.5 rounded bg-green-700 hover:bg-green-600 disabled:bg-zinc-700 text-xs font-medium text-zinc-100`,children:t(`spoolbuddy.settings.saveConfig`,`Save`)})]}),u&&(0,G.jsx)(`div`,{className:`text-xs ${u.type===`ok`?`text-green-400`:`text-red-400`}`,children:u.text})]}),(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3 flex flex-col gap-2`,children:[(0,G.jsxs)(`button`,{onClick:()=>r(`nfc`),className:`flex-1 bg-blue-700 hover:bg-blue-600 transition-colors rounded-lg p-2 flex items-center gap-2`,children:[(0,G.jsx)(Ju,{className:`w-4 h-4 text-blue-300 shrink-0`}),(0,G.jsx)(`span`,{className:`text-xs font-medium text-blue-100`,children:t(`spoolbuddy.settings.nfcDiagnostic`,`NFC Diagnostic`)})]}),(0,G.jsxs)(`button`,{onClick:()=>r(`scale`),className:`flex-1 bg-yellow-700 hover:bg-yellow-600 transition-colors rounded-lg p-2 flex items-center gap-2`,children:[(0,G.jsx)(rd,{className:`w-4 h-4 text-yellow-300 shrink-0`}),(0,G.jsx)(`span`,{className:`text-xs font-medium text-yellow-100`,children:t(`spoolbuddy.settings.scaleDiagnostic`,`Scale Diagnostic`)})]}),(0,G.jsxs)(`button`,{onClick:()=>r(`read_tag`),className:`flex-1 bg-emerald-700 hover:bg-emerald-600 transition-colors rounded-lg p-2 flex items-center gap-2`,children:[(0,G.jsx)(dc,{className:`w-4 h-4 text-emerald-300 shrink-0`}),(0,G.jsx)(`span`,{className:`text-xs font-medium text-emerald-100`,children:t(`spoolbuddy.settings.readTagDiagnostic`,`Read Tag`)})]})]})]}),n&&e&&(0,G.jsx)(M2e,{type:n,deviceId:e.device_id,onClose:()=>r(null)})]})}function L2e({device:e,onBrightnessChange:t}){let{t:n}=U(),[r,i]=(0,y.useState)(e.display_brightness),[a,o]=(0,y.useState)(e.display_blank_timeout),[s,c]=(0,y.useState)(!1),l=(0,y.useRef)(void 0),u=(0,y.useRef)(void 0);(0,y.useEffect)(()=>{i(e.display_brightness),o(e.display_blank_timeout)},[e.display_brightness,e.display_blank_timeout]);let d=(0,y.useCallback)(()=>{c(!0),u.current&&clearTimeout(u.current),u.current=setTimeout(()=>c(!1),1500)},[]),f=(0,y.useCallback)((t,n)=>{l.current&&clearTimeout(l.current),l.current=setTimeout(()=>{Dd.updateDisplay(e.device_id,t,n).then(()=>d()).catch(e=>console.error(`Failed to update display:`,e))},300)},[e.device_id,d]),p=e=>{i(e),t(e),f(e,a)},m=e=>{o(e),f(r,e)};return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between mb-3`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-zinc-300`,children:n(`spoolbuddy.settings.brightness`,`Brightness`)}),s&&(0,G.jsxs)(`span`,{className:`text-xs text-green-400 flex items-center gap-1 animate-pulse`,children:[(0,G.jsx)(`svg`,{className:`w-3 h-3`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,strokeWidth:3,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,d:`M5 13l4 4L19 7`})}),n(`spoolbuddy.settings.saved`,`Saved`)]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`svg`,{className:`w-4 h-4 text-zinc-500 flex-shrink-0`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,strokeWidth:2,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,d:`M12 3v1m0 16v1m9-9h-1M4 12H3m15.364 6.364l-.707-.707M6.343 6.343l-.707-.707m12.728 0l-.707.707M6.343 17.657l-.707.707M16 12a4 4 0 11-8 0 4 4 0 018 0z`})}),(0,G.jsx)(`input`,{type:`range`,min:0,max:100,value:r,onChange:e=>p(parseInt(e.target.value)),className:`flex-1 h-2 bg-zinc-700 rounded-lg appearance-none cursor-pointer accent-green-500`}),(0,G.jsxs)(`span`,{className:`text-sm font-mono text-zinc-400 w-10 text-right`,children:[r,`%`]})]}),!e.has_backlight&&(0,G.jsx)(`p`,{className:`text-xs text-zinc-600 mt-2`,children:n(`spoolbuddy.settings.noBacklight`,`No DSI backlight detected. Brightness control requires a DSI display.`)})]}),(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-4`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-zinc-300 mb-1`,children:n(`spoolbuddy.settings.screenBlank`,`Screen Blank Timeout`)}),(0,G.jsx)(`p`,{className:`text-xs text-zinc-500 mb-3`,children:n(`spoolbuddy.settings.screenBlankDesc`,`Screen turns off after inactivity. Touch to wake.`)}),(0,G.jsx)(`div`,{className:`grid grid-cols-3 gap-2`,children:F2e.map(e=>(0,G.jsx)(`button`,{onClick:()=>m(e.value),className:`px-3 py-2 rounded-lg text-sm font-medium transition-colors min-h-[40px] ${a===e.value?`bg-green-600 text-white`:`bg-zinc-700 text-zinc-300 hover:bg-zinc-600`}`,children:e.label},e.value))})]}),(0,G.jsx)(`p`,{className:`text-xs text-zinc-600 text-center`,children:n(`spoolbuddy.settings.displayNote`,`Brightness is applied as a software filter.`)})]})}function R2e({step:e,labels:t}){return(0,G.jsxs)(`div`,{className:`flex flex-col items-center w-16 shrink-0 pt-1`,children:[(0,G.jsx)(`div`,{className:`flex items-center justify-center w-7 h-7 rounded-full text-xs font-bold ${e===`tare`?`bg-green-600 text-white`:`bg-green-600/20 text-green-400`}`,children:e===`weight`?(0,G.jsx)(`svg`,{className:`w-3.5 h-3.5`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,strokeWidth:3,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,d:`M5 13l4 4L19 7`})}):`1`}),(0,G.jsx)(`span`,{className:`text-[10px] mt-0.5 ${e===`tare`?`text-green-400 font-medium`:`text-green-400/60`}`,children:t.tare}),(0,G.jsx)(`div`,{className:`w-px h-5 my-1 ${e===`weight`?`bg-green-600/40`:`bg-zinc-700`}`}),(0,G.jsx)(`div`,{className:`flex items-center justify-center w-7 h-7 rounded-full text-xs font-bold ${e===`weight`?`bg-green-600 text-white`:`bg-zinc-700 text-zinc-500`}`,children:`2`}),(0,G.jsx)(`span`,{className:`text-[10px] mt-0.5 ${e===`weight`?`text-green-400 font-medium`:`text-zinc-600`}`,children:t.weight})]})}function z2e({device:e,weight:t,weightStable:n,rawAdc:r}){let{t:i}=U(),a=co(),[o,s]=(0,y.useState)(`idle`),[c,l]=(0,y.useState)(`500`),[u,d]=(0,y.useState)(null),[f,p]=(0,y.useState)(!1),[m,h]=(0,y.useState)(null),[g,_]=(0,y.useState)(null),v=(0,y.useRef)(null);(0,y.useEffect)(()=>()=>{v.current&&clearTimeout(v.current)},[]);let b=(0,y.useCallback)(e=>{v.current&&clearTimeout(v.current),v.current=setTimeout(()=>h(null),e)},[]);(0,y.useEffect)(()=>{if(!g)return;let e=()=>Date.now()-g.startedAtMs,t=setInterval(()=>{a.invalidateQueries({queryKey:[`spoolbuddy-devices`]})},1e3),n=setTimeout(()=>{_(null),h({type:`error`,msg:i(`spoolbuddy.settings.tareTimedOut`,`Tare timed out — is the SpoolBuddy daemon running?`)}),b(5e3)},Math.max(0,15e3-e()));return()=>{clearInterval(t),clearTimeout(n)}},[g,a,i,b]),(0,y.useEffect)(()=>{g&&(e?.last_calibrated_at??null)!==g.snapshot&&(_(null),h({type:`ok`,msg:i(`spoolbuddy.settings.tareComplete`,`Tare complete!`)}),b(3e3))},[e?.last_calibrated_at,g,i,b]);let x=e=>{e===`backspace`?l(e=>e.slice(0,-1)||``):e===`.`&&!c.includes(`.`)?l(e=>e+`.`):e>=`0`&&e<=`9`&&l(t=>t===`0`?e:t+e)};return o===`idle`?(0,G.jsxs)(`div`,{className:`flex flex-col h-full`,children:[(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3 mb-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full ${n?`bg-green-500`:`bg-amber-500 animate-pulse`}`}),(0,G.jsx)(`span`,{className:`text-lg font-mono text-zinc-200`,children:t===null?`-- g`:`${t.toFixed(1)} g`})]}),(0,G.jsxs)(`div`,{className:`text-xs text-zinc-500 text-right`,children:[(0,G.jsxs)(`span`,{children:[i(`spoolbuddy.settings.tareOffset`,`Tare`),`: `,e.tare_offset]}),(0,G.jsx)(`span`,{className:`mx-1.5`,children:`·`}),(0,G.jsxs)(`span`,{children:[i(`spoolbuddy.settings.calFactor`,`Factor`),`: `,e.calibration_factor.toFixed(2)]})]})]}),e.last_calibrated_at&&(0,G.jsxs)(`div`,{className:`text-xs text-zinc-600 mt-1`,children:[i(`spoolbuddy.settings.lastCalibrated`,`Last calibrated`),`: `,P2e(e.last_calibrated_at)]})]}),m&&(0,G.jsx)(`div`,{className:`rounded-lg px-3 py-2 mb-3 text-sm ${m.type===`ok`?`bg-green-900/30 text-green-300 border border-green-800`:`bg-red-900/30 text-red-300 border border-red-800`}`,children:m.msg}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsxs)(`button`,{onClick:async()=>{p(!0),h(null),v.current&&=(clearTimeout(v.current),null);let t=e?.last_calibrated_at??null;try{await Dd.tare(e.device_id),h({type:`ok`,msg:i(`spoolbuddy.settings.tareSet`,`Tare command sent. Waiting for device...`)}),_({snapshot:t,startedAtMs:Date.now()})}catch{h({type:`error`,msg:i(`spoolbuddy.settings.tareFailed`,`Failed to send tare command`)}),b(5e3)}finally{p(!1)}},disabled:f,className:`flex-1 px-4 py-2.5 rounded-lg text-sm font-medium bg-zinc-700 text-zinc-200 hover:bg-zinc-600 disabled:opacity-40 transition-colors min-h-[44px] flex items-center justify-center gap-2`,children:[f&&(0,G.jsxs)(`svg`,{className:`w-4 h-4 animate-spin`,viewBox:`0 0 24 24`,fill:`none`,children:[(0,G.jsx)(`circle`,{className:`opacity-25`,cx:`12`,cy:`12`,r:`10`,stroke:`currentColor`,strokeWidth:`4`}),(0,G.jsx)(`path`,{className:`opacity-75`,fill:`currentColor`,d:`M4 12a8 8 0 018-8V0C5.373 0 0 5.373 0 12h4z`})]}),i(`spoolbuddy.weight.tare`,`Tare`)]}),(0,G.jsx)(`button`,{onClick:()=>{s(`tare`),h(null)},className:`flex-1 px-4 py-2.5 rounded-lg text-sm font-medium bg-green-600 text-white hover:bg-green-700 transition-colors min-h-[44px]`,children:i(`spoolbuddy.weight.calibrate`,`Calibrate`)})]})]}):(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsx)(R2e,{step:o,labels:{tare:i(`spoolbuddy.weight.tare`,`Tare`),weight:i(`spoolbuddy.settings.knownWeight`,`Known weight`)}}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 bg-zinc-800 rounded-lg px-3 py-1.5 mb-1.5`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full shrink-0 ${n?`bg-green-500`:`bg-amber-500 animate-pulse`}`}),(0,G.jsx)(`span`,{className:`text-sm font-mono text-zinc-200`,children:t===null?`-- g`:`${t.toFixed(1)} g`}),(0,G.jsx)(`span`,{className:`text-xs ml-auto ${n?`text-green-400`:`text-amber-400`}`,children:n?i(`spoolbuddy.settings.stable`,`Stable`):i(`spoolbuddy.settings.settling`,`Settling...`)})]}),m&&(0,G.jsx)(`div`,{className:`rounded-lg px-3 py-1.5 mb-1.5 text-xs ${m.type===`ok`?`bg-green-900/30 text-green-300 border border-green-800`:`bg-red-900/30 text-red-300 border border-red-800`}`,children:m.msg}),o===`tare`?(0,G.jsx)(`p`,{className:`text-sm text-zinc-300 mb-3`,children:i(`spoolbuddy.settings.calStep1`,`Remove all items from the scale and press Set Zero.`)}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2 mb-1.5`,children:[(0,G.jsx)(`span`,{className:`text-xs text-zinc-400 shrink-0`,children:i(`spoolbuddy.settings.knownWeight`,`Known weight`)}),(0,G.jsxs)(`div`,{className:`flex-1 bg-zinc-900 border border-zinc-600 rounded px-3 py-1 text-right text-lg font-mono text-zinc-100`,children:[c||`0`,(0,G.jsx)(`span`,{className:`text-zinc-500 ml-1`,children:`g`})]})]}),(0,G.jsx)(`div`,{className:`grid grid-cols-4 gap-1 mb-1.5`,children:[`7`,`8`,`9`,`backspace`,`4`,`5`,`6`,`.`,`1`,`2`,`3`,`0`].map(e=>(0,G.jsx)(`button`,{onClick:()=>x(e),className:`rounded text-lg font-medium transition-colors h-[48px] active:scale-95 ${e===`backspace`?`bg-zinc-700 text-zinc-300 hover:bg-zinc-600`:`bg-zinc-800 text-zinc-100 hover:bg-zinc-700 border border-zinc-700`}`,children:e===`backspace`?`⌫`:e},e))})]}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`button`,{onClick:()=>{s(`idle`),h(null)},className:`flex-1 px-4 py-2 rounded-lg text-sm bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors h-[40px]`,children:i(`common.cancel`,`Cancel`)}),(0,G.jsxs)(`button`,{onClick:async()=>{if(o===`tare`){p(!0),h(null);try{d(r),await Dd.tare(e.device_id),h({type:`ok`,msg:i(`spoolbuddy.settings.zeroSet`,`Zero point set. Place known weight on scale.`)}),s(`weight`)}catch{h({type:`error`,msg:i(`spoolbuddy.settings.tareFailed`,`Failed to send tare command`)})}finally{p(!1)}}else if(o===`weight`){let t=parseFloat(c);if(r===null||!t||t<=0)return;p(!0),h(null);try{await Dd.setCalibrationFactor(e.device_id,t,r,u??void 0),h({type:`ok`,msg:i(`spoolbuddy.settings.calibrationDone`,`Calibration complete!`)}),b(3e3),s(`idle`)}catch{h({type:`error`,msg:i(`spoolbuddy.settings.calibrationFailed`,`Calibration failed`)}),b(5e3)}finally{p(!1)}}},disabled:f,className:`flex-1 px-4 py-2 rounded-lg text-sm font-medium bg-green-600 text-white hover:bg-green-700 disabled:opacity-40 transition-colors h-[40px] flex items-center justify-center gap-2`,children:[f&&(0,G.jsxs)(`svg`,{className:`w-4 h-4 animate-spin`,viewBox:`0 0 24 24`,fill:`none`,children:[(0,G.jsx)(`circle`,{className:`opacity-25`,cx:`12`,cy:`12`,r:`10`,stroke:`currentColor`,strokeWidth:`4`}),(0,G.jsx)(`path`,{className:`opacity-75`,fill:`currentColor`,d:`M4 12a8 8 0 018-8V0C5.373 0 0 5.373 0 12h4z`})]}),o===`tare`?i(`spoolbuddy.settings.setZero`,`Set Zero`):i(`spoolbuddy.settings.calibrateNow`,`Calibrate`)]})]})]})]})}function B2e({device:e}){let{t}=U(),[n,r]=(0,y.useState)(null),[i,a]=(0,y.useState)(null),[o,s]=(0,y.useState)(!1),[c,l]=(0,y.useState)(!1),u=e.update_status===`pending`||e.update_status===`updating`;(0,y.useEffect)(()=>{u&&n===`applying`&&r(null)},[u,n]),(0,y.useEffect)(()=>{let e=()=>{u&&setTimeout(()=>window.location.reload(),1e3)};return window.addEventListener(`spoolbuddy-online`,e),()=>window.removeEventListener(`spoolbuddy-online`,e)},[u]);let{data:d,refetch:f}=K({queryKey:[`spoolbuddy-update-check`,e.device_id],queryFn:()=>Dd.checkDaemonUpdate(e.device_id),staleTime:0}),{data:p}=K({queryKey:[`spoolbuddy-ssh-key`],queryFn:()=>Dd.getSSHPublicKey(),enabled:o,staleTime:1/0}),m=async()=>{r(`checking`),a(null);try{await f()}finally{r(null)}},h=async()=>{r(`applying`),a(null);try{await Dd.triggerUpdate(e.device_id)}catch(e){a(e instanceof Error?e.message:`Failed to trigger update`),r(null)}},g=n!=null||u,_=()=>{p?.public_key&&(navigator.clipboard.writeText(p.public_key),l(!0),setTimeout(()=>l(!1),2e3))},v=e.firmware_version||(d?.current_version&&d.current_version!==`0.0.0`?d.current_version:null);return(0,G.jsxs)(`div`,{className:`space-y-3`,children:[(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3 space-y-3`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between items-center text-sm`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.currentVersion`,`Current Version`)}),(0,G.jsx)(`span`,{className:`text-zinc-200 font-mono`,children:v||(0,G.jsx)(`span`,{className:`text-zinc-500 italic text-xs`,children:t(`spoolbuddy.settings.versionPending`,`Waiting for daemon...`)})})]}),g?(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`svg`,{className:`w-4 h-4 animate-spin text-green-400 flex-shrink-0`,viewBox:`0 0 24 24`,fill:`none`,children:[(0,G.jsx)(`circle`,{className:`opacity-25`,cx:`12`,cy:`12`,r:`10`,stroke:`currentColor`,strokeWidth:`4`}),(0,G.jsx)(`path`,{className:`opacity-75`,fill:`currentColor`,d:`M4 12a8 8 0 018-8V0C5.373 0 0 5.373 0 12h4z`})]}),(0,G.jsx)(`span`,{className:`text-green-300 text-xs`,children:n===`checking`?t(`spoolbuddy.settings.checking`,`Checking for updates...`):e.update_message||t(`spoolbuddy.settings.updateWaiting`,`Updating...`)})]}):e.update_status===`error`?(0,G.jsx)(`p`,{className:`text-xs text-red-300`,children:e.update_message||t(`spoolbuddy.settings.updateFailed`,`Update failed`)}):i?(0,G.jsx)(`p`,{className:`text-xs text-red-300`,children:i}):d?.update_available?(0,G.jsxs)(`p`,{className:`text-xs text-green-300`,children:[t(`spoolbuddy.settings.updateAvailable`,`Update available`),`: `,v,` → `,d.latest_version]}):null,!g&&(d?.update_available?(0,G.jsx)(`button`,{onClick:h,disabled:!e.online,className:`w-full px-3 py-2 rounded-lg text-sm font-medium bg-green-600 text-white hover:bg-green-700 disabled:opacity-40 transition-colors`,children:e.online?t(`spoolbuddy.settings.applyUpdate`,`Apply Update`):t(`spoolbuddy.settings.deviceOffline`,`Device Offline`)}):(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`button`,{onClick:m,className:`flex-1 px-3 py-2 rounded-lg text-xs font-medium bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors`,children:t(`spoolbuddy.settings.checkUpdates`,`Check for Updates`)}),(0,G.jsx)(`button`,{onClick:h,disabled:!e.online,className:`px-3 py-2 rounded-lg text-xs font-medium bg-zinc-700 text-zinc-400 hover:bg-zinc-600 hover:text-zinc-200 disabled:opacity-40 transition-colors`,children:t(`spoolbuddy.settings.forceUpdate`,`Force Update`)})]}))]}),(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3`,children:[(0,G.jsxs)(`button`,{onClick:()=>s(!o),className:`w-full flex justify-between items-center text-xs`,children:[(0,G.jsx)(`span`,{className:`font-medium text-zinc-400`,children:t(`spoolbuddy.settings.sshSetup`,`SSH Setup`)}),(0,G.jsx)(`svg`,{className:`w-3 h-3 text-zinc-500 transition-transform ${o?`rotate-180`:``}`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,strokeWidth:2,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,d:`M19 9l-7 7-7-7`})})]}),o&&(0,G.jsxs)(`div`,{className:`mt-2 space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-zinc-500`,children:t(`spoolbuddy.settings.sshDescription`,`SSH key is deployed automatically. For manual setup, add this key to ~/.ssh/authorized_keys on the device.`)}),p?.public_key?(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(`pre`,{className:`bg-zinc-900 rounded p-2 text-[10px] text-zinc-400 font-mono break-all whitespace-pre-wrap`,children:p.public_key}),(0,G.jsx)(`button`,{onClick:_,className:`absolute top-1 right-1 px-1.5 py-0.5 rounded text-[10px] bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors`,children:c?t(`common.copied`,`Copied!`):t(`common.copy`,`Copy`)})]}):(0,G.jsx)(`span`,{className:`text-[10px] text-zinc-500 italic`,children:t(`spoolbuddy.settings.sshKeyLoading`,`Loading...`)})]})]})]})}function V2e({percent:e,color:t}){return(0,G.jsx)(`div`,{className:`w-full h-2 bg-zinc-700 rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full transition-all ${t}`,style:{width:`${Math.min(100,Math.max(0,e))}%`}})})}function H2e(e){let t=Math.floor(e/86400),n=Math.floor(e%86400/3600),r=Math.floor(e%3600/60);return t>0?`${t}d ${n}h ${r}m`:n>0?`${n}h ${r}m`:`${r}m`}function U2e({device:e}){let{t}=U(),n=e.system_stats;if(!n)return(0,G.jsx)(`div`,{className:`flex items-center justify-center h-32`,children:(0,G.jsx)(`p`,{className:`text-sm text-zinc-500`,children:t(`spoolbuddy.settings.systemStatsWaiting`,`Waiting for system stats...`)})});let r=n.memory,i=n.disk,a=(n.cpu_temp_c??0)>=80?`text-red-400`:(n.cpu_temp_c??0)>=65?`text-amber-400`:`text-green-400`,o=(r?.percent??0)>=90?`bg-red-500`:(r?.percent??0)>=70?`bg-amber-500`:`bg-green-500`,s=(i?.percent??0)>=90?`bg-red-500`:(i?.percent??0)>=70?`bg-amber-500`:`bg-green-500`;return(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2`,children:[(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-zinc-300 mb-2`,children:`CPU`}),(0,G.jsxs)(`div`,{className:`space-y-1.5 text-xs`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.cores`,`Cores`)}),(0,G.jsx)(`span`,{className:`text-zinc-300 font-mono`,children:n.cpu_count??`-`})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.loadAvg`,`Load Avg`)}),(0,G.jsx)(`span`,{className:`text-zinc-300 font-mono`,children:n.load_avg?n.load_avg.join(` / `):`-`})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.temp`,`Temp`)}),(0,G.jsx)(`span`,{className:`font-mono font-medium ${a}`,children:n.cpu_temp_c==null?`-`:`${n.cpu_temp_c}\u00B0C`})]})]})]}),(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-zinc-300 mb-2`,children:t(`spoolbuddy.settings.memory`,`Memory`)}),r?(0,G.jsxs)(`div`,{className:`space-y-1.5`,children:[(0,G.jsx)(V2e,{percent:r.percent??0,color:o}),(0,G.jsxs)(`div`,{className:`space-y-1 text-xs`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.used`,`Used`)}),(0,G.jsxs)(`span`,{className:`text-zinc-300 font-mono`,children:[r.used_mb,` / `,r.total_mb,` MB`]})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.available`,`Free`)}),(0,G.jsxs)(`span`,{className:`text-zinc-300 font-mono`,children:[r.available_mb,` MB`]})]})]})]}):(0,G.jsx)(`span`,{className:`text-xs text-zinc-500`,children:`-`})]})]}),(0,G.jsx)(`div`,{className:`bg-zinc-800 rounded-lg px-3 py-2`,children:(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-zinc-300 shrink-0`,children:t(`spoolbuddy.settings.disk`,`Disk`)}),i?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`flex-1`,children:(0,G.jsx)(V2e,{percent:i.percent??0,color:s})}),(0,G.jsxs)(`span`,{className:`text-xs text-zinc-300 font-mono shrink-0`,children:[i.used_gb,` / `,i.total_gb,` GB`]})]}):(0,G.jsx)(`span`,{className:`text-xs text-zinc-500`,children:`-`})]})}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-2`,children:[(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-zinc-300 mb-1.5`,children:t(`spoolbuddy.settings.osInfo`,`OS`)}),(0,G.jsxs)(`div`,{className:`space-y-1 text-xs`,children:[n.os?.os&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.distro`,`Distro`)}),(0,G.jsx)(`span`,{className:`text-zinc-300 truncate ml-2`,children:n.os.os})]}),n.os?.kernel&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.kernel`,`Kernel`)}),(0,G.jsx)(`span`,{className:`text-zinc-300 font-mono truncate ml-2`,children:n.os.kernel})]}),n.os?.arch&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.arch`,`Arch`)}),(0,G.jsx)(`span`,{className:`text-zinc-300 font-mono`,children:n.os.arch})]})]})]}),(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-3`,children:[(0,G.jsx)(`h3`,{className:`text-sm font-semibold text-zinc-300 mb-1.5`,children:t(`spoolbuddy.settings.runtime`,`Runtime`)}),(0,G.jsxs)(`div`,{className:`space-y-1 text-xs`,children:[n.os?.python&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:`Python`}),(0,G.jsx)(`span`,{className:`text-zinc-300 font-mono`,children:n.os.python})]}),n.system_uptime_s!=null&&(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:t(`spoolbuddy.settings.systemUptime`,`Uptime`)}),(0,G.jsx)(`span`,{className:`text-zinc-300`,children:H2e(n.system_uptime_s)})]})]})]})]})]})}function W2e(){let{sbState:e,setDisplayBrightness:t}=lr(),{t:n}=U(),[r,i]=(0,y.useState)(`device`),{data:a=[]}=K({queryKey:[`spoolbuddy-devices`],queryFn:()=>Dd.getDevices(),refetchInterval:1e4}),o=e.deviceId?a.find(t=>t.device_id===e.deviceId)??a[0]:a[0],s=[{id:`device`,label:n(`spoolbuddy.settings.tabDevice`,`Device`)},{id:`display`,label:n(`spoolbuddy.settings.tabDisplay`,`Display`)},{id:`scale`,label:n(`spoolbuddy.settings.tabScale`,`Scale`)},{id:`updates`,label:n(`spoolbuddy.settings.tabUpdates`,`Updates`)},{id:`system`,label:n(`spoolbuddy.settings.tabSystem`,`System`)}];return(0,G.jsxs)(`div`,{className:`h-full flex flex-col p-4`,children:[(0,G.jsx)(`h1`,{className:`text-xl font-semibold text-zinc-100 mb-3`,children:n(`spoolbuddy.nav.settings`,`Settings`)}),(0,G.jsx)(`div`,{className:`flex gap-1 bg-zinc-800/50 rounded-lg p-1 mb-4`,children:s.map(e=>(0,G.jsx)(`button`,{onClick:()=>i(e.id),className:`flex-1 px-2 py-2 rounded-md text-sm font-medium transition-colors min-h-[36px] ${r===e.id?`bg-zinc-700 text-zinc-100`:`text-zinc-500 hover:text-zinc-300`}`,children:e.label},e.id))}),(0,G.jsx)(`div`,{className:`flex-1 min-h-0 overflow-y-auto`,children:o?(0,G.jsxs)(G.Fragment,{children:[r===`device`&&(0,G.jsx)(I2e,{device:o}),r===`display`&&(0,G.jsx)(L2e,{device:o,onBrightnessChange:t}),r===`scale`&&(0,G.jsx)(z2e,{device:o,weight:e.weight,weightStable:e.weightStable,rawAdc:e.rawAdc}),r===`updates`&&(0,G.jsx)(B2e,{device:o}),r===`system`&&(0,G.jsx)(U2e,{device:o})]}):(0,G.jsx)(`div`,{className:`flex items-center justify-center h-32`,children:(0,G.jsx)(`div`,{className:`text-center text-zinc-500`,children:(0,G.jsx)(`p`,{className:`text-sm`,children:n(`spoolbuddy.settings.noDevice`,`No SpoolBuddy device found`)})})})})]})}function G2e({device:e,weight:t,weightStable:n,rawAdc:r}){let{t:i}=U(),[a,o]=(0,y.useState)(!1),[s,c]=(0,y.useState)(`idle`),[l,u]=(0,y.useState)(`500`),[d,f]=(0,y.useState)(null),[p,m]=(0,y.useState)(!1),h=e=>{e===`backspace`?u(e=>e.slice(0,-1)||``):e===`.`&&!l.includes(`.`)?u(e=>e+`.`):e>=`0`&&e<=`9`&&u(t=>t===`0`?e:t+e)};return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`bg-zinc-800 rounded-lg p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsx)(`span`,{className:`text-sm text-zinc-400`,children:i(`spoolbuddy.settings.currentWeight`,`Current weight`)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`div`,{className:`w-2 h-2 rounded-full ${n?`bg-green-500`:`bg-amber-500 animate-pulse`}`}),(0,G.jsx)(`span`,{className:`text-lg font-mono text-zinc-200`,children:t===null?`-- g`:`${t.toFixed(1)} g`})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-4 mt-3 text-xs`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:i(`spoolbuddy.settings.tareOffset`,`Tare offset`)}),(0,G.jsx)(`span`,{className:`text-zinc-400 font-mono`,children:e.tare_offset})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:i(`spoolbuddy.settings.calFactor`,`Cal. factor`)}),(0,G.jsx)(`span`,{className:`text-zinc-400 font-mono`,children:e.calibration_factor.toFixed(2)})]})]})]}),s===`idle`?(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`button`,{onClick:async()=>{m(!0);try{await Dd.tare(e.device_id)}catch(e){console.error(`Failed to tare:`,e)}finally{m(!1)}},disabled:p,className:`flex-1 px-4 py-2.5 rounded-lg text-sm font-medium bg-zinc-700 text-zinc-200 hover:bg-zinc-600 disabled:opacity-40 transition-colors min-h-[44px]`,children:p?`...`:i(`spoolbuddy.weight.tare`,`Tare`)}),(0,G.jsx)(`button`,{onClick:()=>{c(`tare`)},className:`flex-1 px-4 py-2.5 rounded-lg text-sm font-medium bg-green-600 text-white hover:bg-green-700 transition-colors min-h-[44px]`,children:i(`spoolbuddy.weight.calibrate`,`Calibrate`)})]}):(0,G.jsxs)(`div`,{className:`bg-zinc-800 border border-zinc-700 rounded-lg p-3 space-y-2`,children:[(0,G.jsx)(`div`,{className:`text-sm font-medium text-zinc-200`,children:s===`tare`?i(`spoolbuddy.settings.calStep1`,`Step 1: Remove all items from the scale`):i(`spoolbuddy.settings.calStep2`,`Step 2: Place known weight on scale`)}),s===`weight`&&(0,G.jsxs)(`div`,{className:`space-y-1.5`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`span`,{className:`text-xs text-zinc-400`,children:i(`spoolbuddy.settings.knownWeight`,`Known weight (g)`)}),(0,G.jsxs)(`div`,{className:`flex-1 bg-zinc-900 border border-zinc-600 rounded px-3 py-1.5 text-right text-base font-mono text-zinc-100`,children:[l||`0`,(0,G.jsx)(`span`,{className:`text-zinc-500 ml-1`,children:`g`})]})]}),(0,G.jsx)(`div`,{className:`grid grid-cols-4 gap-1`,children:[`7`,`8`,`9`,`backspace`,`4`,`5`,`6`,`.`,`1`,`2`,`3`,`0`].map(e=>(0,G.jsx)(`button`,{onClick:()=>h(e),className:`py-2 rounded text-sm font-medium transition-colors min-h-[36px] ${e===`backspace`?`bg-zinc-700 text-zinc-300 hover:bg-zinc-600`:`bg-zinc-800 text-zinc-100 hover:bg-zinc-700 border border-zinc-700`}`,children:e===`backspace`?`⌫`:e},e))})]}),(0,G.jsxs)(`div`,{className:`flex gap-2`,children:[(0,G.jsx)(`button`,{onClick:()=>c(`idle`),className:`flex-1 px-4 py-2 rounded-lg text-sm bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors min-h-[40px]`,children:i(`common.cancel`,`Cancel`)}),(0,G.jsx)(`button`,{onClick:async()=>{if(s===`tare`){o(!0);try{f(r),await Dd.tare(e.device_id),c(`weight`)}catch(e){console.error(`Failed to tare:`,e)}finally{o(!1)}}else if(s===`weight`){let t=parseFloat(l);if(r===null||!t||t<=0)return;o(!0);try{await Dd.setCalibrationFactor(e.device_id,t,r,d??void 0),c(`idle`)}catch(e){console.error(`Failed to calibrate:`,e)}finally{o(!1)}}},disabled:a,className:`flex-1 px-4 py-2 rounded-lg text-sm font-medium bg-green-600 text-white hover:bg-green-700 disabled:opacity-40 transition-colors min-h-[40px]`,children:a?`...`:s===`tare`?i(`spoolbuddy.settings.setZero`,`Set Zero`):i(`spoolbuddy.settings.calibrateNow`,`Calibrate`)})]})]})]})}function K2e(){let{sbState:e}=lr(),{t}=U(),n=or(),{data:r=[]}=K({queryKey:[`spoolbuddy-devices`],queryFn:()=>Dd.getDevices(),refetchInterval:1e4}),i=e.deviceId?r.find(t=>t.device_id===e.deviceId)??r[0]:r[0];return(0,G.jsxs)(`div`,{className:`h-full flex flex-col p-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3 mb-4`,children:[(0,G.jsx)(`button`,{onClick:()=>n(`/spoolbuddy/settings`),className:`p-1.5 rounded-lg text-zinc-400 hover:text-zinc-200 hover:bg-zinc-800 transition-colors`,children:(0,G.jsx)(`svg`,{className:`w-5 h-5`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,strokeWidth:2,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,d:`M15 19l-7-7 7-7`})})}),(0,G.jsx)(`h1`,{className:`text-xl font-semibold text-zinc-100`,children:t(`spoolbuddy.settings.scaleCalibration`,`Scale Calibration`)})]}),(0,G.jsx)(`div`,{className:`flex-1 min-h-0 overflow-y-auto`,children:i?(0,G.jsx)(G2e,{device:i,weight:e.weight,weightStable:e.weightStable,rawAdc:e.rawAdc}):(0,G.jsx)(`div`,{className:`flex items-center justify-center h-32`,children:(0,G.jsx)(`div`,{className:`text-center text-zinc-500`,children:(0,G.jsx)(`p`,{className:`text-sm`,children:t(`spoolbuddy.settings.noDevice`,`No SpoolBuddy device found`)})})})})]})}function q2e({formData:e,printersWithCalibrations:t,selectedProfiles:n,setSelectedProfiles:r,expandedPrinters:i,setExpandedPrinters:a}){let{t:o}=U(),s=e=>{a(t=>{let n=new Set(t);return n.has(e)?n.delete(e):n.add(e),n})},c=(e,t,n)=>{let i=`${e}:${t}:${n??`null`}`,a=`${e}:${n??`null`}`;r(e=>{let t=new Set(e);if(t.has(i))t.delete(i);else{for(let e of Array.from(t)){let n=e.split(`:`);`${n[0]}:${n[2]}`===a&&t.delete(e)}t.add(i)}return t})},l=()=>{let n=new Set;for(let{printer:r,calibrations:i}of t){if(!r.connected)continue;let t=i.filter(t=>aW(t,e)),a=new Map;for(let e of t){let t=`${e.extruder_id??`null`}`;a.has(t)||a.set(t,[]),a.get(t).push(e)}for(let[e,t]of a)if(t.length>0){let i=[...t].sort((e,t)=>t.k_value-e.k_value)[0];n.add(`${r.id}:${i.cali_idx}:${e}`)}}r(n)};if(!e.material)return(0,G.jsx)(`div`,{className:`p-6 bg-bambu-dark rounded-lg text-center`,children:(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:o(`inventory.selectMaterialFirst`)})});if(t.length===0)return(0,G.jsx)(`div`,{className:`p-6 bg-bambu-dark rounded-lg text-center`,children:(0,G.jsx)(`p`,{className:`text-bambu-gray`,children:o(`inventory.noPrintersConfigured`)})});let u=t.reduce((t,{printer:n,calibrations:r})=>n.connected?t+r.filter(t=>aW(t,e)).length:t,0),d=(e,t)=>{let r=`${e.id}:${t.cali_idx}:${t.extruder_id??`null`}`,i=n.has(r);return(0,G.jsxs)(`label`,{className:`flex items-center gap-3 p-3 rounded-lg cursor-pointer transition-all border ${i?`bg-bambu-green/10 border-bambu-green/30`:`bg-bambu-dark border-transparent hover:bg-bambu-dark/80`}`,children:[(0,G.jsx)(`input`,{type:`checkbox`,checked:i,onChange:()=>c(String(e.id),t.cali_idx,t.extruder_id),className:`w-4 h-4 rounded border-bambu-dark-tertiary text-bambu-green focus:ring-bambu-green`}),(0,G.jsx)(`div`,{className:`flex-1 min-w-0`,children:(0,G.jsx)(`span`,{className:`text-sm font-medium ${i?`text-bambu-green`:`text-white`}`,children:t.name||t.filament_id})}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 shrink-0`,children:[t.nozzle_diameter&&(0,G.jsxs)(`span`,{className:`text-xs font-mono px-2 py-0.5 rounded bg-bambu-dark text-bambu-gray`,children:[t.nozzle_diameter,`mm`]}),(0,G.jsxs)(`span`,{className:`text-xs font-mono px-2 py-0.5 rounded bg-bambu-dark text-bambu-gray`,children:[`K=`,t.k_value.toFixed(3)]})]})]},`${t.cali_idx}-${t.extruder_id}`)};return(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between`,children:[(0,G.jsxs)(`p`,{className:`text-xs text-bambu-gray`,children:[o(`inventory.matchingFilter`),`: `,e.brand||o(`inventory.anyBrand`),` / `,e.material,` / `,e.subtype||o(`inventory.anyVariant`)]}),u>0&&(0,G.jsxs)(`button`,{type:`button`,onClick:l,className:`flex items-center gap-1.5 px-2 py-1 text-xs bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-bambu-gray hover:text-white hover:border-bambu-green transition-colors`,children:[(0,G.jsx)(gu,{className:`w-3.5 h-3.5`}),o(`inventory.autoSelect`),` (`,u,`)`]})]}),(0,G.jsx)(`div`,{className:`space-y-3`,children:t.map(({printer:t,calibrations:n})=>{let r=i.has(String(t.id)),a=n.filter(t=>aW(t,e)),c=a.length,l=a.some(e=>e.extruder_id!==void 0&&e.extruder_id!==null&&e.extruder_id>0),u=a.filter(e=>e.extruder_id===1),f=a.filter(e=>e.extruder_id===0||e.extruder_id===void 0||e.extruder_id===null);return(0,G.jsxs)(`div`,{className:`border border-bambu-dark-tertiary rounded-lg overflow-hidden`,children:[(0,G.jsxs)(`button`,{type:`button`,onClick:()=>s(String(t.id)),className:`w-full px-4 py-3 flex items-center justify-between bg-bambu-dark-secondary hover:bg-bambu-dark-tertiary transition-colors`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[r?(0,G.jsx)(ps,{className:`w-4 h-4 text-bambu-gray`}):(0,G.jsx)(ms,{className:`w-4 h-4 text-bambu-gray`}),(0,G.jsx)(`span`,{className:`font-medium text-white`,children:t.name}),c>0?(0,G.jsxs)(`span`,{className:`text-xs px-2 py-0.5 rounded-full bg-bambu-green/20 text-bambu-green`,children:[c,` `,o(c===1?`inventory.match`:`inventory.matches`)]}):(0,G.jsx)(`span`,{className:`text-xs px-2 py-0.5 rounded-full bg-bambu-dark-tertiary text-bambu-gray`,children:o(`inventory.noMatches`)})]}),(0,G.jsx)(`span`,{className:`text-xs px-2 py-1 rounded-full ${t.connected?`bg-green-500/20 text-green-500`:`bg-bambu-gray/20 text-bambu-gray`}`,children:t.connected?o(`inventory.connected`):o(`inventory.offline`)})]}),r&&(0,G.jsx)(`div`,{className:`px-4 py-3 space-y-3 bg-bambu-dark border-t border-bambu-dark-tertiary`,children:t.connected?c===0?(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic py-2`,children:o(`inventory.noKProfilesMatch`)}):l?(0,G.jsxs)(G.Fragment,{children:[u.length>0&&(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:o(`inventory.leftNozzle`)}),(0,G.jsx)(`div`,{className:`space-y-2`,children:u.map(e=>d(t,e))})]}),f.length>0&&(0,G.jsxs)(`div`,{className:`space-y-2`,children:[(0,G.jsx)(`p`,{className:`text-xs font-medium text-bambu-gray uppercase tracking-wide`,children:o(`inventory.rightNozzle`)}),(0,G.jsx)(`div`,{className:`space-y-2`,children:f.map(e=>d(t,e))})]})]}):(0,G.jsx)(`div`,{className:`space-y-2`,children:a.map(e=>d(t,e))}):(0,G.jsx)(`p`,{className:`text-sm text-bambu-gray italic py-2`,children:o(`inventory.printerOffline`)})})]},t.id)})}),n.size>0&&(0,G.jsx)(`div`,{className:`p-3 bg-bambu-green/10 border border-bambu-green/30 rounded-lg`,children:(0,G.jsxs)(`p`,{className:`text-sm text-white`,children:[(0,G.jsx)(`span`,{className:`font-semibold`,children:n.size}),` `,o(`inventory.profilesSelected`)]})})]})}function X9(e){return Ef(e.color_name,e.rgba,e.color_name_is_synthesized)}var J2e=[`PLA`,`PETG`,`ABS`,`ASA`,`TPU`,`PA`,`PC`,`PVA`,`HIPS`];function Y2e(){let{t:e}=U(),t=Mf(),{showToast:n}=Gd(),{sbState:r}=lr(),[i,a]=(0,y.useState)(`existing`),[o,s]=(0,y.useState)(null),[c,l]=(0,y.useState)(``),[u,d]=(0,y.useState)(`idle`),[f,p]=(0,y.useState)(``),[m,h]=(0,y.useState)(!1),[g,_]=(0,y.useState)(!1),[v,b]=(0,y.useState)(null),{data:x}=K({queryKey:[`spoolman-settings`],queryFn:Z.getSpoolmanSettings,staleTime:300*1e3}),S=x!==void 0,C=x?.spoolman_enabled===`true`&&!!x?.spoolman_url,{data:w=[],refetch:T}=K({queryKey:[C?`spoolman-inventory-spools`:`inventory-spools`,`write-tag`],queryFn:()=>C?Z.getSpoolmanInventorySpools(!1):Z.getSpools(!1),refetchInterval:1e4,enabled:S}),{data:E=[]}=K({queryKey:[`spoolbuddy-devices`],queryFn:()=>Dd.getDevices(),refetchInterval:5e3}),{data:D}=K({queryKey:[`settings`],queryFn:Z.getSettings}),O=E[0],k=r.deviceOnline,A=Pf(D?.currency||`USD`),j=(0,y.useMemo)(()=>{let e;if(i===`existing`)e=w.filter(e=>!e.tag_uid&&!e.archived_at);else if(i===`replace`)e=w.filter(e=>(e.tag_uid||e.tray_uuid)&&!e.archived_at);else return[];if(c){let t=c.toLowerCase();e=e.filter(e=>e.material?.toLowerCase().includes(t)||X9(e)?.toLowerCase().includes(t)||e.color_name?.toLowerCase().includes(t)||e.brand?.toLowerCase().includes(t)||e.subtype?.toLowerCase().includes(t))}return e},[w,i,c,t]),M=(0,y.useCallback)(e=>{let t=e.detail;(t.sak??t.data?.sak)===0&&(_(!0),b(t.tag_uid??t.data?.tag_uid??null))},[]),N=(0,y.useCallback)(e=>{let t=e.detail;_(!0),b(t.tag_uid??t.data?.tag_uid??null)},[]),P=(0,y.useCallback)(()=>{_(!1),b(null)},[]),F=(0,y.useCallback)(t=>{let n=t.detail;(n.spool_id===o?.id||n.data?.spool_id===o?.id)&&(d(`success`),p(e(`spoolbuddy.writeTag.writeSuccess`,`Tag written successfully!`)),T(),setTimeout(()=>{d(`idle`),s(null),p(``)},5e3))},[o,e,T]),I=(0,y.useCallback)(t=>{let n=t.detail;(n.spool_id===o?.id||n.data?.spool_id===o?.id)&&(d(`error`),p(n.message??n.data?.message??e(`spoolbuddy.writeTag.writeFailed`,`Write failed`)))},[o,e]);(0,y.useEffect)(()=>(window.addEventListener(`spoolbuddy-unknown-tag`,M),window.addEventListener(`spoolbuddy-tag-matched`,N),window.addEventListener(`spoolbuddy-tag-removed`,P),window.addEventListener(`spoolbuddy-tag-written`,F),window.addEventListener(`spoolbuddy-tag-write-failed`,I),()=>{window.removeEventListener(`spoolbuddy-unknown-tag`,M),window.removeEventListener(`spoolbuddy-tag-matched`,N),window.removeEventListener(`spoolbuddy-tag-removed`,P),window.removeEventListener(`spoolbuddy-tag-written`,F),window.removeEventListener(`spoolbuddy-tag-write-failed`,I)}),[M,N,P,F,I]),(0,y.useEffect)(()=>{s(null),d(`idle`),p(``),l(``)},[i]);let L=async()=>{if(!(!o||!O)){d(`writing`),p(e(`spoolbuddy.writeTag.waiting`,`Waiting for SpoolBuddy...`));try{let e=await Dd.writeTag(O.device_id,o.id);if(e?.warnings?.length)for(let t of e.warnings)n(t,`warning`)}catch{d(`error`),p(e(`spoolbuddy.writeTag.queueFailed`,`Failed to queue write command`))}}},R=async()=>{if(O){try{await Dd.cancelWrite(O.device_id)}catch{}d(`idle`),p(``)}},z=async()=>{if(!(!o||!X2e(o))){h(!0),d(`idle`),p(``);try{C?await Z.linkTagToSpoolmanSpool(o.id,{tag_uid:``,tray_uuid:``}):await Z.linkTagToSpool(o.id,{tag_uid:``,tray_uuid:``,data_origin:`manual`}),await T(),s(null),d(`success`),p(e(`spoolbuddy.writeTag.untagSuccess`,`Tag removed from spool`)),setTimeout(()=>{d(`idle`),p(``)},2500)}catch{d(`error`),p(e(`spoolbuddy.writeTag.untagFailed`,`Failed to remove tag from spool`))}finally{h(!1)}}},B=(0,y.useCallback)(e=>{s(e),d(`idle`),p(``),T()},[T]),V=o&&k&&u!==`writing`&&u!==`success`;return(0,G.jsxs)(`div`,{className:`flex flex-col h-full`,children:[(0,G.jsx)(`div`,{className:`flex border-b border-bambu-dark-tertiary shrink-0`,children:[{key:`existing`,label:e(`spoolbuddy.writeTag.tabExisting`,`Existing Spool`)},{key:`new`,label:e(`spoolbuddy.writeTag.tabNew`,`New Spool`)},{key:`replace`,label:e(`spoolbuddy.writeTag.tabReplace`,`Replace Tag`)}].map(e=>(0,G.jsx)(`button`,{onClick:()=>a(e.key),className:`flex-1 py-3 text-sm font-medium transition-colors ${i===e.key?`text-bambu-green border-b-2 border-bambu-green bg-bambu-dark`:`text-zinc-400 hover:text-zinc-200 hover:bg-bambu-dark-tertiary`}`,children:e.label},e.key))}),(0,G.jsxs)(`div`,{className:`flex flex-1 overflow-hidden`,children:[(0,G.jsx)(`div`,{className:`flex-1 flex flex-col overflow-hidden border-r border-bambu-dark-tertiary`,children:i===`new`?(0,G.jsx)(Q2e,{currencySymbol:A,onCreated:B,selectedSpool:o,spoolmanMode:C,t:e}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`p-3 shrink-0`,children:(0,G.jsx)(`input`,{type:`text`,value:c,onChange:e=>l(e.target.value),placeholder:e(`spoolbuddy.writeTag.searchPlaceholder`,`Search by material, color, brand...`),className:`w-full px-3 py-2 bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded text-sm text-white placeholder-zinc-500 focus:outline-none focus:border-bambu-green`})}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto px-3 pb-3 space-y-2`,children:j.length===0?(0,G.jsx)(`div`,{className:`text-center text-zinc-500 py-8 text-sm`,children:i===`existing`?e(`spoolbuddy.writeTag.noUntaggedSpools`,`No spools without tags`):e(`spoolbuddy.writeTag.noTaggedSpools`,`No spools with tags`)}):j.map(e=>(0,G.jsx)(Z2e,{spool:e,selected:o?.id===e.id,showTag:i===`replace`,onClick:()=>{s(e),d(`idle`),p(``)}},e.id))})]})}),(0,G.jsx)(`div`,{className:`w-[340px] flex flex-col items-center justify-center p-6 shrink-0`,children:(0,G.jsx)($2e,{writeStatus:u,writeMessage:f,selectedSpool:o,tagOnReader:g,tagUid:v,deviceOnline:k,canWrite:!!V,isReplace:i===`replace`,canUntag:i===`replace`&&!!o&&X2e(o),untagging:m,onWrite:L,onUntag:z,onCancel:R,onRetry:()=>{d(`idle`),p(``)},t:e})})]})]})}function X2e(e){return!!(e.tag_uid||e.tray_uuid)}function Z2e({spool:e,selected:t,showTag:n,onClick:r}){let i=Math.max(0,e.label_weight-e.weight_used),a=e.label_weight>0?Math.round(i/e.label_weight*100):0;return(0,G.jsxs)(`button`,{onClick:r,className:`w-full flex items-center gap-3 p-3 rounded-lg text-left transition-colors ${t?`bg-bambu-green/15 border border-bambu-green/50`:`bg-bambu-dark-secondary hover:bg-bambu-dark-tertiary border border-transparent`}`,children:[(0,G.jsx)(`div`,{className:`w-8 h-8 rounded-full shrink-0 border border-white/10`,style:e.rgba?kf(e.rgba):{backgroundColor:`#666`}}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsxs)(`span`,{className:`text-sm font-medium text-white truncate`,children:[e.brand?`${e.brand} `:``,e.material,e.subtype?` ${e.subtype}`:``]}),(0,G.jsxs)(`span`,{className:`text-[10px] font-mono text-zinc-500 shrink-0`,children:[`#`,e.id]})]}),(0,G.jsxs)(`div`,{className:`flex items-center gap-2 text-xs text-zinc-400`,children:[X9(e)&&(0,G.jsx)(`span`,{children:X9(e)}),(0,G.jsxs)(`span`,{children:[i,`g / `,e.label_weight,`g (`,a,`%)`]})]}),n&&e.tag_uid&&(0,G.jsx)(`div`,{className:`text-xs text-zinc-500 mt-0.5 font-mono`,children:e.tag_uid})]}),t&&(0,G.jsx)(`svg`,{className:`w-5 h-5 text-bambu-green shrink-0`,fill:`currentColor`,viewBox:`0 0 20 20`,children:(0,G.jsx)(`path`,{fillRule:`evenodd`,d:`M16.707 5.293a1 1 0 010 1.414l-8 8a1 1 0 01-1.414 0l-4-4a1 1 0 011.414-1.414L8 12.586l7.293-7.293a1 1 0 011.414 0z`,clipRule:`evenodd`})})]})}function Q2e({currencySymbol:e,onCreated:t,selectedSpool:n,spoolmanMode:r,t:i}){let{data:a=[]}=K({queryKey:[r?`spoolman-inventory-spools`:`inventory-spools`,`write-tag-form`],queryFn:()=>r?Z.getSpoolmanInventorySpools(!0):Z.getSpools(!0)}),{data:o}=K({queryKey:[`settings`],queryFn:Z.getSettings}),[s,c]=(0,y.useState)(`simple`),[l,u]=(0,y.useState)(`filament`),[d,f]=(0,y.useState)(f9),[p,m]=(0,y.useState)({}),[h,g]=(0,y.useState)(!1),[_,v]=(0,y.useState)(1),[b,x]=(0,y.useState)(!1),[S,C]=(0,y.useState)(null),[w,T]=(0,y.useState)(!1),[E,D]=(0,y.useState)(!1),[O,k]=(0,y.useState)([]),[A,j]=(0,y.useState)([]),[M,N]=(0,y.useState)([]),[P,F]=(0,y.useState)([]),[I,L]=(0,y.useState)([]),[R,z]=(0,y.useState)(``),[B,V]=(0,y.useState)([]),[ee,te]=(0,y.useState)([]),[ne,re]=(0,y.useState)(new Set),[ie,ae]=(0,y.useState)(new Set);(0,y.useEffect)(()=>{V($U())},[]),(0,y.useEffect)(()=>{let e=!1;return(async()=>{if(s===`full`){D(!0);try{let[t,n]=await Promise.allSettled([(async()=>(await Z.getCloudStatus()).is_authenticated?{connected:!0,presets:await Z.getFilamentPresets()}:{connected:!1,presets:[]})(),(async()=>(await Z.orcaCloudStatus()).connected?{connected:!0,presets:(await Z.orcaCloudListProfiles()).filament}:{connected:!1,presets:[]})()]);if(e)return;let r=t.status===`fulfilled`&&t.value.connected,i=n.status===`fulfilled`&&n.value.connected,a=t.status===`fulfilled`?t.value.presets:[],o=n.status===`fulfilled`?n.value.presets:[];T(r||i),k([...a,...o])}catch{e||T(!1)}finally{e||D(!1)}Z.getSpoolCatalog().then(t=>{e||F(t)}).catch(()=>void 0),Z.getColorCatalog().then(t=>{e||L(t)}).catch(()=>void 0),Z.getLocalPresets().then(t=>{e||j(t.filament)}).catch(()=>void 0),Z.getBuiltinFilaments().then(t=>{e||N(t)}).catch(()=>void 0);try{let t=await Z.getPrinters(),n=await Promise.all(t.map(e=>Z.getPrinterStatus(e.id).catch(()=>null))),r=[];for(let e=0;e<t.length;e++){let i=t[e],a=n[e],o=a?.connected??!1,s=[];o&&(s=await KU(i.id,a)),r.push({printer:{...i,connected:o},calibrations:s})}e||te(r)}catch{}}})(),()=>{e=!0}},[s]),(0,y.useEffect)(()=>{ee.length>0&&ae(new Set(ee.map(e=>String(e.printer.id))))},[ee]);let oe=(0,y.useMemo)(()=>YU(O,new Set,A,M),[O,A,M]),se=(0,y.useMemo)(()=>XU(d.slicer_filament,oe),[d.slicer_filament,oe]),H=(0,y.useMemo)(()=>{let e=JU(O,A),t=I.map(e=>e.manufacturer?.trim()).filter(e=>!!e);return Array.from(new Set([...e,...t])).sort((e,t)=>e.localeCompare(t))},[O,A,I]),ce=(0,y.useMemo)(()=>{let e=I.map(e=>e.material?.trim()).filter(e=>!!e);return Array.from(new Set([...zU,...e])).sort((e,t)=>e.localeCompare(t))},[I]),le=(0,y.useMemo)(()=>{let e=[];for(let t of I){let n=t.manufacturer?.trim(),r=t.material?.trim();n&&r&&e.push({brand:n,material:r})}for(let t of O){let n=qU(t.name);n.brand&&n.material&&e.push({brand:n.brand,material:n.material})}for(let t of A){let n=qU(t.name),r=t.filament_vendor?.trim()||n.brand,i=n.material;r&&i&&e.push({brand:r,material:i})}return e},[O,I,A]),ue=(0,y.useMemo)(()=>{let e=new Map;for(let t of le){let n=t.brand.toLowerCase(),r=t.material.toLowerCase();e.has(n)||e.set(n,new Set),e.get(n).add(r)}return e},[le]),de=(0,y.useMemo)(()=>{let e=new Map;for(let t of le){let n=t.brand.toLowerCase(),r=t.material.toLowerCase();e.has(r)||e.set(r,new Set),e.get(r).add(n)}return e},[le]),fe=(0,y.useMemo)(()=>ZU(H,d.brand),[H,d.brand]),pe=(0,y.useMemo)(()=>ZU(ce,d.material),[ce,d.material]),me=(0,y.useMemo)(()=>QU(fe,d.material,de),[fe,d.material,de]),he=(0,y.useMemo)(()=>QU(pe,d.brand,ue),[pe,d.brand,ue]),ge=(e,t)=>{f(n=>({...n,[e]:t})),p[e]&&m(t=>({...t,[e]:void 0}))},_e=e=>{V(t=>eW(e,t))},ve=async e=>{let t=r?Z.saveSpoolmanKProfiles:Z.saveSpoolKProfiles;if(ne.size===0){try{await t(e,[])}catch{}return}let n=[];for(let e of ne){let[t,r,i]=e.split(`:`),a=parseInt(t),o=parseInt(r),s=i===`null`?0:parseInt(i),c=ee.find(e=>e.printer.id===a);if(c){let e=c.calibrations.find(e=>e.cali_idx===o&&(e.extruder_id??0)===s);e&&n.push({printer_id:a,extruder:s,nozzle_diameter:e.nozzle_diameter||`0.4`,k_value:e.k_value,name:e.name||null,cali_idx:e.cali_idx,setting_id:e.setting_id||null})}}n.length>0&&await t(e,n)},ye=async()=>{C(null);let e=h1e(d,s===`simple`?!0:h);if(!e.isValid){m(e.errors),u(`filament`);return}let n=se?.displayName||R||null,a={material:d.material,subtype:d.subtype||null,brand:d.brand||null,color_name:d.color_name||null,rgba:d.rgba||null,extra_colors:d.extra_colors||null,effect_type:d.effect_type||null,label_weight:d.label_weight,core_weight:d.core_weight,core_weight_catalog_id:d.core_weight_catalog_id,weight_used:d.weight_used,slicer_filament:d.slicer_filament||null,slicer_filament_name:n,nozzle_temp_min:null,nozzle_temp_max:null,note:d.note||null,cost_per_kg:d.cost_per_kg,added_full:null,last_used:null,encode_time:null,tag_uid:null,tray_uuid:null,data_origin:null,tag_type:null,last_scale_weight:null,last_weighed_at:null,category:d.category.trim()||null,low_stock_threshold_pct:d.low_stock_threshold_pct};x(!0);try{if(_>1){let e=r?await Z.bulkCreateSpoolmanInventorySpools(a,_):await Z.bulkCreateSpools(a,_),n=r&&e&&typeof e==`object`&&`created`in e?e.created:e;for(let e of n)await ve(e.id);n.length>0&&t(n[0])}else{let e=r?await Z.createSpoolmanInventorySpool(a):await Z.createSpool(a);await ve(e.id),t(e)}}catch{C(i(`spoolbuddy.writeTag.createFailed`,`Failed to create spool`))}finally{x(!1)}},be=`#${(d.rgba||`808080FF`).slice(0,6)}`;return(0,G.jsxs)(`div`,{className:`p-3 space-y-3 overflow-y-auto h-full`,children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-2 py-2 bg-bambu-dark-secondary rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`span`,{className:`text-sm text-zinc-200`,children:i(`spoolbuddy.writeTag.viewMode`,`View`)}),(0,G.jsxs)(`div`,{className:`flex rounded-lg overflow-hidden border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`button`,{type:`button`,onClick:()=>c(`simple`),className:`px-3 py-1.5 text-xs font-medium ${s===`simple`?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark text-zinc-400`}`,children:i(`spoolbuddy.writeTag.simpleView`,`Simple`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>c(`full`),className:`px-3 py-1.5 text-xs font-medium ${s===`full`?`bg-bambu-green/20 text-bambu-green`:`bg-bambu-dark text-zinc-400`}`,children:i(`spoolbuddy.writeTag.fullView`,`Full`)})]})]}),s===`simple`?n?(0,G.jsxs)(`div`,{className:`flex flex-col items-center justify-center h-full p-6 text-center bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg`,children:[(0,G.jsx)(`div`,{className:`w-12 h-12 rounded-full mb-4 border border-white/10`,style:n.rgba?kf(n.rgba):{backgroundColor:`#666`}}),(0,G.jsxs)(`p`,{className:`text-white font-medium`,children:[n.brand?`${n.brand} `:``,n.material]}),X9(n)&&(0,G.jsx)(`p`,{className:`text-zinc-400 text-sm`,children:X9(n)}),(0,G.jsxs)(`p`,{className:`text-zinc-500 text-xs mt-1`,children:[n.label_weight,`g`]}),(0,G.jsx)(`p`,{className:`text-bambu-green text-sm mt-4`,children:i(`spoolbuddy.writeTag.spoolCreated`,`Spool created! Ready to write.`)})]}):(0,G.jsxs)(`div`,{className:`p-4 space-y-4 overflow-y-auto bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg`,children:[(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-zinc-400 mb-1`,children:i(`spoolbuddy.writeTag.material`,`Material`)}),(0,G.jsx)(`select`,{value:d.material,onChange:e=>ge(`material`,e.target.value),className:`w-full px-3 py-2 bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded text-sm text-white focus:outline-none focus:border-bambu-green`,children:J2e.map(e=>(0,G.jsx)(`option`,{value:e,children:e},e))})]}),(0,G.jsxs)(`div`,{className:`flex gap-3`,children:[(0,G.jsxs)(`div`,{className:`flex-1`,children:[(0,G.jsx)(`label`,{className:`block text-xs text-zinc-400 mb-1`,children:i(`spoolbuddy.writeTag.colorName`,`Color Name`)}),(0,G.jsx)(`input`,{type:`text`,value:d.color_name,onChange:e=>ge(`color_name`,e.target.value),placeholder:`Jade White`,className:`w-full px-3 py-2 bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded text-sm text-white placeholder-zinc-500 focus:outline-none focus:border-bambu-green`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-zinc-400 mb-1`,children:i(`spoolbuddy.writeTag.color`,`Color`)}),(0,G.jsx)(`input`,{type:`color`,value:be,onChange:e=>ge(`rgba`,e.target.value.replace(`#`,``).toUpperCase()+`FF`),className:`w-10 h-9 bg-transparent border border-bambu-dark-tertiary rounded cursor-pointer`})]})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-zinc-400 mb-1`,children:i(`spoolbuddy.writeTag.brand`,`Brand`)}),(0,G.jsx)(`input`,{type:`text`,value:d.brand,onChange:e=>ge(`brand`,e.target.value),placeholder:`Polymaker`,className:`w-full px-3 py-2 bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded text-sm text-white placeholder-zinc-500 focus:outline-none focus:border-bambu-green`})]}),(0,G.jsxs)(`div`,{children:[(0,G.jsx)(`label`,{className:`block text-xs text-zinc-400 mb-1`,children:i(`spoolbuddy.writeTag.weight`,`Weight (g)`)}),(0,G.jsx)(`input`,{type:`number`,value:d.label_weight,onChange:e=>ge(`label_weight`,parseInt(e.target.value)||0),min:0,max:1e4,className:`w-full px-3 py-2 bg-bambu-dark-tertiary border border-bambu-dark-tertiary rounded text-sm text-white focus:outline-none focus:border-bambu-green`})]}),(0,G.jsx)(`button`,{onClick:ye,disabled:b||!d.material,className:`w-full py-2.5 bg-bambu-green hover:bg-bambu-green/80 disabled:opacity-50 disabled:cursor-not-allowed text-white text-sm font-medium rounded transition-colors`,children:b?i(`spoolbuddy.writeTag.creating`,`Creating...`):i(`spoolbuddy.writeTag.createSpool`,`Create Spool`)})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsxs)(`div`,{className:`flex items-center justify-between px-2 py-2 bg-bambu-dark-secondary rounded-lg border border-bambu-dark-tertiary`,children:[(0,G.jsx)(`span`,{className:`text-sm text-zinc-200`,children:i(`inventory.quickAdd`,`Quick Add`)}),(0,G.jsx)(`button`,{type:`button`,onClick:()=>g(e=>!e),className:`relative inline-flex h-6 w-11 items-center rounded-full transition-colors ${h?`bg-bambu-green`:`bg-bambu-dark-tertiary`}`,children:(0,G.jsx)(`span`,{className:`inline-block h-4.5 w-4.5 rounded-full bg-white transition-transform ${h?`translate-x-6`:`translate-x-1`}`})})]}),(0,G.jsxs)(`div`,{className:`flex border border-bambu-dark-tertiary rounded-lg overflow-hidden`,children:[(0,G.jsx)(`button`,{onClick:()=>u(`filament`),className:`flex-1 py-2.5 text-sm font-medium ${l===`filament`?`bg-bambu-green/15 text-bambu-green`:`bg-bambu-dark-secondary text-zinc-400`}`,children:i(`inventory.filamentInfoTab`,`Filament`)}),!h&&(0,G.jsx)(`button`,{onClick:()=>u(`pa-profile`),className:`flex-1 py-2.5 text-sm font-medium ${l===`pa-profile`?`bg-bambu-green/15 text-bambu-green`:`bg-bambu-dark-secondary text-zinc-400`}`,children:i(`inventory.paProfileTab`,`PA Profile`)})]}),(0,G.jsx)(`div`,{className:`bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg p-3`,children:l===`filament`?(0,G.jsxs)(`div`,{className:`space-y-4`,children:[(0,G.jsx)(y1e,{formData:d,updateField:ge,cloudAuthenticated:w,loadingCloudPresets:E,presetInputValue:R,setPresetInputValue:z,selectedPresetOption:se,filamentOptions:oe,availableBrands:fe,availableMaterials:pe,suggestedBrands:me,suggestedMaterials:he,quickAdd:h,detailsRequired:!h,quantity:_,onQuantityChange:v,errors:p}),(0,G.jsx)(x1e,{formData:d,updateField:ge,recentColors:B,onColorUsed:_e,catalogColors:I}),(0,G.jsx)(C1e,{formData:d,updateField:ge,spoolCatalog:P,currencySymbol:e,availableCategories:Array.from(new Set(a.map(e=>e.category?.trim()).filter(e=>!!e))).sort((e,t)=>e.localeCompare(t)),globalLowStockThreshold:o?.low_stock_threshold??20})]}):(0,G.jsx)(q2e,{formData:d,updateField:ge,printersWithCalibrations:ee,selectedProfiles:ne,setSelectedProfiles:re,expandedPrinters:ie,setExpandedPrinters:ae})})]}),S&&(0,G.jsx)(`div`,{className:`text-sm text-red-400 bg-red-900/20 border border-red-900/40 rounded-lg px-3 py-2`,children:S}),s===`full`&&(0,G.jsx)(`button`,{onClick:ye,disabled:b,className:`w-full py-3 bg-bambu-green hover:bg-bambu-green/80 disabled:opacity-50 disabled:cursor-not-allowed text-white text-sm font-medium rounded transition-colors`,children:b?i(`spoolbuddy.writeTag.creating`,`Creating...`):i(`spoolbuddy.writeTag.createSpool`,`Create Spool`)}),s===`full`&&n&&(0,G.jsxs)(`div`,{className:`flex flex-col items-center justify-center p-4 text-center bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg`,children:[(0,G.jsx)(`div`,{className:`w-12 h-12 rounded-full mb-4 border border-white/10`,style:n.rgba?kf(n.rgba):{backgroundColor:`#666`}}),(0,G.jsxs)(`p`,{className:`text-white font-medium`,children:[n.brand?`${n.brand} `:``,n.material]}),X9(n)&&(0,G.jsx)(`p`,{className:`text-zinc-400 text-sm`,children:X9(n)}),(0,G.jsxs)(`p`,{className:`text-zinc-500 text-xs mt-1`,children:[n.label_weight,`g`]}),(0,G.jsx)(`p`,{className:`text-bambu-green text-sm mt-4`,children:i(`spoolbuddy.writeTag.spoolCreated`,`Spool created! Ready to write.`)})]})]})}function $2e({writeStatus:e,writeMessage:t,selectedSpool:n,tagOnReader:r,tagUid:i,deviceOnline:a,canWrite:o,isReplace:s,canUntag:c,untagging:l,onWrite:u,onUntag:d,onCancel:f,onRetry:p,t:m}){if(e===`success`)return(0,G.jsxs)(`div`,{className:`flex flex-col items-center text-center space-y-4`,children:[(0,G.jsx)(`div`,{className:`w-16 h-16 rounded-full bg-green-500/20 flex items-center justify-center`,children:(0,G.jsx)(`svg`,{className:`w-8 h-8 text-green-400`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:2,d:`M5 13l4 4L19 7`})})}),(0,G.jsx)(`p`,{className:`text-green-400 font-medium`,children:t}),n&&(0,G.jsxs)(`p`,{className:`text-zinc-400 text-sm`,children:[n.brand?`${n.brand} `:``,n.material,n.subtype?` ${n.subtype}`:``,X9(n)?` - ${X9(n)}`:``]})]});if(e===`error`)return(0,G.jsxs)(`div`,{className:`flex flex-col items-center text-center space-y-4`,children:[(0,G.jsx)(`div`,{className:`w-16 h-16 rounded-full bg-red-500/20 flex items-center justify-center`,children:(0,G.jsx)(`svg`,{className:`w-8 h-8 text-red-400`,fill:`none`,viewBox:`0 0 24 24`,stroke:`currentColor`,children:(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,strokeWidth:2,d:`M6 18L18 6M6 6l12 12`})})}),(0,G.jsx)(`p`,{className:`text-red-400 font-medium`,children:t}),(0,G.jsx)(`button`,{onClick:p,className:`px-4 py-2 bg-bambu-dark-tertiary hover:bg-bambu-dark-secondary text-white text-sm rounded transition-colors`,children:m(`spoolbuddy.writeTag.tryAgain`,`Try Again`)})]});if(e===`writing`)return(0,G.jsxs)(`div`,{className:`flex flex-col items-center text-center space-y-4`,children:[(0,G.jsxs)(`div`,{className:`relative w-16 h-16`,children:[(0,G.jsx)(`div`,{className:`absolute inset-0 rounded-full border-2 border-bambu-green/30 animate-ping`}),(0,G.jsx)(`div`,{className:`absolute inset-2 rounded-full border-2 border-bambu-green/50 animate-pulse`}),(0,G.jsx)(`div`,{className:`absolute inset-0 flex items-center justify-center`,children:(0,G.jsx)(Z9,{className:`w-8 h-8 text-bambu-green`})})]}),(0,G.jsx)(`p`,{className:`text-bambu-green font-medium`,children:m(`spoolbuddy.writeTag.writing`,`Writing tag...`)}),(0,G.jsx)(`p`,{className:`text-zinc-500 text-xs`,children:t}),(0,G.jsx)(`button`,{onClick:f,className:`px-4 py-2 bg-bambu-dark-tertiary hover:bg-bambu-dark-secondary text-zinc-400 text-sm rounded transition-colors`,children:m(`spoolbuddy.writeTag.cancel`,`Cancel`)})]});if(!a)return(0,G.jsxs)(`div`,{className:`flex flex-col items-center text-center space-y-3`,children:[(0,G.jsx)(Z9,{className:`w-12 h-12 text-zinc-600`}),(0,G.jsx)(`p`,{className:`text-zinc-500 text-sm`,children:m(`spoolbuddy.writeTag.deviceOffline`,`SpoolBuddy is offline`)})]});if(!n)return(0,G.jsxs)(`div`,{className:`flex flex-col items-center text-center space-y-3`,children:[(0,G.jsx)(Z9,{className:`w-12 h-12 text-zinc-600`}),(0,G.jsx)(`p`,{className:`text-zinc-400 text-sm`,children:m(`spoolbuddy.writeTag.selectSpool`,`Select a spool, then place a blank NTAG on the reader`)})]});let h=n.rgba?kf(n.rgba):{backgroundColor:`#666`};return(0,G.jsxs)(`div`,{className:`flex flex-col items-center text-center space-y-4 w-full`,children:[(0,G.jsx)(`div`,{className:`relative w-16 h-16`,children:r?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`absolute inset-0 rounded-full bg-bambu-green/10`}),(0,G.jsx)(`div`,{className:`absolute inset-0 flex items-center justify-center`,children:(0,G.jsx)(Z9,{className:`w-8 h-8 text-bambu-green`})})]}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(`div`,{className:`absolute inset-0 rounded-full border-2 border-zinc-600 animate-pulse`}),(0,G.jsx)(`div`,{className:`absolute inset-0 flex items-center justify-center`,children:(0,G.jsx)(Z9,{className:`w-8 h-8 text-zinc-500`})})]})}),r?(0,G.jsxs)(`div`,{className:`space-y-1`,children:[(0,G.jsx)(`p`,{className:`text-bambu-green text-sm font-medium`,children:m(`spoolbuddy.writeTag.tagReady`,`Tag detected — ready to write`)}),i&&(0,G.jsx)(`p`,{className:`text-zinc-500 text-xs font-mono`,children:i})]}):(0,G.jsx)(`p`,{className:`text-zinc-400 text-sm`,children:m(`spoolbuddy.writeTag.placeTag`,`Place an NTAG on the reader`)}),(0,G.jsxs)(`div`,{className:`w-full bg-bambu-dark-secondary rounded-lg p-3 space-y-2`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-3`,children:[(0,G.jsx)(`div`,{className:`w-8 h-8 rounded-full border border-white/10 shrink-0`,style:h}),(0,G.jsxs)(`div`,{className:`text-left min-w-0`,children:[(0,G.jsxs)(`p`,{className:`text-white text-sm font-medium truncate`,children:[n.brand?`${n.brand} `:``,n.material]}),X9(n)&&(0,G.jsx)(`p`,{className:`text-zinc-400 text-xs`,children:X9(n)})]})]}),(0,G.jsxs)(`div`,{className:`text-xs text-zinc-500`,children:[n.label_weight,`g`]})]}),s&&n.tag_uid&&(0,G.jsx)(`p`,{className:`text-yellow-500/80 text-xs`,children:m(`spoolbuddy.writeTag.replaceWarning`,`Old tag will be unlinked. New tag will replace it.`)}),(0,G.jsx)(`button`,{onClick:u,disabled:!o,className:`w-full py-3 bg-bambu-green hover:bg-bambu-green/80 disabled:opacity-40 disabled:cursor-not-allowed text-white font-medium rounded-lg transition-colors text-sm`,children:s?m(`spoolbuddy.writeTag.replaceTag`,`Replace Tag`):m(`spoolbuddy.writeTag.writeTag`,`Write Tag`)}),s&&c&&(0,G.jsx)(`button`,{onClick:d,disabled:l,className:`w-full py-2.5 bg-bambu-dark-tertiary hover:bg-bambu-dark-secondary disabled:opacity-40 disabled:cursor-not-allowed text-zinc-200 rounded-lg transition-colors text-sm`,children:l?m(`spoolbuddy.writeTag.untagging`,`Removing tag...`):m(`spoolbuddy.writeTag.untagSpool`,`Untag Selected Spool`)})]})}function Z9({className:e}){return(0,G.jsxs)(`svg`,{className:e,viewBox:`0 0 24 24`,fill:`none`,stroke:`currentColor`,strokeWidth:1.5,children:[(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,d:`M8.288 15.038a5.25 5.25 0 017.424 0M5.106 11.856c3.807-3.808 9.98-3.808 13.788 0M1.924 8.674c5.565-5.565 14.587-5.565 20.152 0`}),(0,G.jsx)(`path`,{strokeLinecap:`round`,strokeLinejoin:`round`,d:`M12.53 18.22l-.53.53-.53-.53a.75.75 0 011.06 0z`})]})}var e4e=`spoolbuddy-default-core-weight`;function t4e(){try{let e=localStorage.getItem(e4e);if(e){let t=parseInt(e,10);if(t>=0&&t<=500)return t}}catch{}return 250}function n4e({spool:e,liveScaleWeight:t,persistedGrossWeight:n,onClose:r,onSyncWeight:i,onAssignToAms:a,isAssigned:o,onUnassignFromAms:s,className:c}){let{t:l}=U(),[u,d]=(0,y.useState)(!1),[f,p]=(0,y.useState)(!1),[m,h]=(0,y.useState)(null),{data:g}=K({queryKey:[`spool-k-profiles`,e.id],queryFn:()=>Z.getSpoolKProfiles(e.id),enabled:!e.k_profiles||e.k_profiles.length===0,staleTime:300*1e3}),_=e.k_profiles&&e.k_profiles.length>0?e.k_profiles:g,v=Df(e.rgba),b=Ef(e.color_name,e.rgba,e.color_name_is_synthesized),x=e.core_weight&&e.core_weight>0?e.core_weight:t4e(),S=t===null?null:Math.round(Math.max(0,t)),C=m??(n===void 0?S:n===null?null:Math.round(Math.max(0,n))),w=Math.round(Math.max(0,(e.label_weight||0)-(e.weight_used||0))),T=S!==null&&S>=10?Math.round(Math.max(0,S-x)):w,E=Math.round(e.label_weight||1e3),D=E>0?Math.min(100,Math.round(T/E*100)):null,O=D===null?`#808080`:D>50?`#22c55e`:D>20?`#eab308`:`#ef4444`,k=Math.max(0,(e.label_weight||0)-(e.weight_used||0))+x,A=S===null?null:S-k,j=A===null?null:Math.abs(A)<=50,M=C??Math.round(k),N=e.nozzle_temp_min!=null&&e.nozzle_temp_max!=null?`${e.nozzle_temp_min}-${e.nozzle_temp_max}\u00B0C`:null,P=e.slicer_filament_name||e.slicer_filament||null,F=e.note?.trim()||null,I=_&&_.length>0?Array.from(new Set(_.map(e=>e.k_value.toFixed(3)))).join(`, `):null,L=async()=>{if(t===null)return;let n=Math.round(Math.max(0,t));d(!0);try{await Dd.updateSpoolWeight(e.id,n),h(n),p(!0),i?.(),setTimeout(()=>p(!1),3e3)}catch(e){console.error(`Failed to sync weight:`,e)}finally{d(!1)}};return(0,G.jsxs)(`div`,{className:`flex flex-col items-center space-y-4 max-w-md ${c??``}`,children:[(0,G.jsxs)(`div`,{className:`flex items-start gap-5`,children:[(0,G.jsxs)(`div`,{className:`relative shrink-0`,children:[(0,G.jsx)(W9,{color:v,isEmpty:!1,size:100}),D!==null&&(0,G.jsxs)(`div`,{className:`absolute -bottom-2 -right-2 px-2 py-0.5 rounded-full text-xs font-bold text-white shadow-lg`,style:{backgroundColor:O},children:[D,`%`]})]}),(0,G.jsxs)(`div`,{className:`flex-1 min-w-0 pt-1`,children:[(0,G.jsxs)(`div`,{className:`flex items-center gap-2`,children:[(0,G.jsx)(`h3`,{className:`text-lg font-semibold text-zinc-100`,children:b||l(`spoolbuddy.spool.unknownColor`)}),(0,G.jsxs)(`span`,{className:`text-xs font-mono text-zinc-500 shrink-0`,children:[`#`,e.id]})]}),(0,G.jsxs)(`p`,{className:`text-sm text-zinc-400`,children:[e.brand,` • `,e.material,e.subtype&&` ${e.subtype}`]}),(0,G.jsxs)(`div`,{className:`mt-3`,children:[(0,G.jsxs)(`div`,{className:`flex items-baseline gap-2`,children:[(0,G.jsxs)(`span`,{className:`text-3xl font-bold font-mono text-zinc-100`,children:[T,`g`]}),(0,G.jsxs)(`span`,{className:`text-sm text-zinc-500`,children:[`/ `,E,`g`]})]}),(0,G.jsx)(`p`,{className:`text-xs text-zinc-500 mt-0.5`,children:l(`spoolbuddy.spool.remaining`,`Remaining`)}),(0,G.jsx)(`div`,{className:`mt-2 max-w-xs`,children:(0,G.jsx)(`div`,{className:`h-2 bg-zinc-700 rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full transition-all duration-500`,style:{width:`${D??0}%`,backgroundColor:O}})})})]})]})]}),(0,G.jsxs)(`div`,{className:`grid grid-cols-2 gap-x-6 gap-y-2 text-sm bg-zinc-800 rounded-lg p-4 w-full`,children:[(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:l(`spoolbuddy.dashboard.grossWeight`,`Gross weight`)}),(0,G.jsxs)(`span`,{className:`font-mono text-zinc-300`,children:[M,`g`]})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:l(`spoolbuddy.spool.coreWeight`,`Core`)}),(0,G.jsxs)(`span`,{className:`font-mono text-zinc-300`,children:[x,`g`]})]}),(0,G.jsxs)(`div`,{className:`flex justify-between`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:l(`spoolbuddy.dashboard.spoolSize`,`Spool size`)}),(0,G.jsxs)(`span`,{className:`font-mono text-zinc-300`,children:[E,`g`]})]}),(0,G.jsxs)(`div`,{className:`flex justify-between items-center`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:l(`spoolbuddy.spool.scaleWeight`,`Scale`)}),S===null?(0,G.jsx)(`span`,{className:`text-zinc-500`,children:`—`}):(0,G.jsxs)(`span`,{className:`flex items-center gap-1 font-mono ${j?`text-green-500`:`text-yellow-500`}`,children:[S,`g`,j?(0,G.jsx)(fs,{className:`w-3.5 h-3.5`}):(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(Iu,{className:`w-3.5 h-3.5`}),(0,G.jsx)(`button`,{onClick:L,className:`p-1 hover:bg-green-500/20 rounded transition-colors text-green-500`,title:l(`spoolbuddy.dashboard.syncWeight`,`Sync Weight`),children:(0,G.jsx)(Vl,{className:`w-4 h-4`})})]})]})]}),(0,G.jsxs)(`div`,{className:`flex justify-between items-center`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:l(`spoolbuddy.dashboard.tagId`,`Tag`)}),(0,G.jsx)(`span`,{className:`font-mono text-xs text-zinc-400 truncate max-w-[120px]`,title:e.tag_uid||``,children:e.tag_uid?e.tag_uid.slice(-8):`—`})]}),N&&(0,G.jsxs)(`div`,{className:`flex justify-between items-center`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:l(`spoolbuddy.inventory.nozzleTemp`,`Nozzle`)}),(0,G.jsx)(`span`,{className:`font-mono text-zinc-300`,children:N})]}),e.cost_per_kg!=null&&e.cost_per_kg>0&&(0,G.jsxs)(`div`,{className:`flex justify-between items-center`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:l(`spoolbuddy.inventory.costPerKg`,`Cost/kg`)}),(0,G.jsxs)(`span`,{className:`font-mono text-zinc-300`,children:[e.cost_per_kg.toFixed(2),`/kg`]})]}),I&&(0,G.jsxs)(`div`,{className:`flex justify-between items-center`,children:[(0,G.jsx)(`span`,{className:`text-zinc-500`,children:l(`spoolbuddy.inventory.kProfiles`,`K-Profile`)}),(0,G.jsx)(`span`,{className:`font-mono text-zinc-300 truncate max-w-[220px] text-right`,title:I,children:I})]}),P&&(0,G.jsxs)(`div`,{className:`min-w-0`,children:[(0,G.jsx)(`p`,{className:`text-xs text-zinc-500 mb-1`,children:l(`spoolbuddy.inventory.slicerFilament`,`Slicer Filament`)}),(0,G.jsx)(`p`,{className:`text-sm text-zinc-300 whitespace-pre-wrap break-words`,children:P})]}),F&&(0,G.jsxs)(`div`,{className:`col-span-2`,children:[(0,G.jsx)(`p`,{className:`text-xs text-zinc-500 mb-1`,children:l(`spoolbuddy.inventory.note`,`Note`)}),(0,G.jsx)(`p`,{className:`text-sm leading-5 text-zinc-300 whitespace-pre-wrap break-words max-h-[3.75rem] overflow-y-auto pr-1`,children:F})]})]}),(0,G.jsxs)(`div`,{className:`flex gap-2 justify-center`,children:[a&&(0,G.jsx)(`button`,{onClick:o?void 0:a,disabled:!!o,className:`px-5 py-2.5 rounded-lg text-sm font-medium bg-green-600 text-white hover:bg-green-700 transition-colors min-h-[44px] disabled:opacity-50 disabled:cursor-not-allowed`,children:l(`spoolbuddy.modal.assignToAms`,`Assign to AMS`)}),s&&(0,G.jsxs)(`button`,{onClick:s,className:`px-5 py-2.5 rounded-lg text-sm font-medium bg-red-600/20 text-red-400 hover:bg-red-600/30 transition-colors min-h-[44px]`,children:[(0,G.jsx)(zu,{className:`w-4 h-4 inline mr-1`}),l(`inventory.unassignSpool`)]}),(0,G.jsx)(`button`,{onClick:L,disabled:t===null||u,className:`px-5 py-2.5 rounded-lg text-sm font-medium transition-colors min-h-[44px] ${f?`bg-green-600/20 text-green-400`:a?`bg-zinc-700 text-zinc-300 hover:bg-zinc-600 disabled:opacity-40 disabled:cursor-not-allowed`:`bg-green-600 text-white hover:bg-green-700 disabled:opacity-40 disabled:cursor-not-allowed`}`,children:u?`...`:f?l(`spoolbuddy.dashboard.weightSynced`,`Synced!`):l(`spoolbuddy.dashboard.syncWeight`,`Sync Weight`)}),r&&(0,G.jsx)(`button`,{onClick:r,className:`px-5 py-2.5 rounded-lg text-sm font-medium bg-zinc-700 text-zinc-300 hover:bg-zinc-600 transition-colors min-h-[44px]`,children:l(`spoolbuddy.dashboard.close`,`Close`)})]})]})}function r4e(e){return Df(e.rgba)}function i4e(e){return Math.max(0,e.label_weight-e.weight_used)}function a4e(e){return e.label_weight<=0?0:Math.max(0,Math.min(100,(e.label_weight-e.weight_used)/e.label_weight*100))}function o4e(e){let t=[e.material];return e.subtype&&t.push(e.subtype),t.join(` `)}function s4e(e){let t=e.ams_id===254||e.ams_id===255,n=!t&&e.ams_id>=128;return Op(e.ams_id,e.tray_id,n,t)}function c4e({color:e,size:t=56}){return(0,G.jsxs)(`svg`,{width:t,height:t,viewBox:`0 0 56 56`,children:[(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`26`,fill:e}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`20`,fill:e,style:{filter:`brightness(0.85)`}}),(0,G.jsx)(`ellipse`,{cx:`20`,cy:`20`,rx:`6`,ry:`4`,fill:`white`,opacity:`0.3`}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`8`,fill:`#2d2d2d`}),(0,G.jsx)(`circle`,{cx:`28`,cy:`28`,r:`5`,fill:`#1a1a1a`})]})}function l4e(){let{sbState:e,selectedPrinterId:t}=lr(),{t:n}=U(),r=Mf(),{showToast:i}=Gd(),a=co(),[o,s]=(0,y.useState)(``),[c,l]=(0,y.useState)(`all`),[u,d]=(0,y.useState)(null),[f,p]=(0,y.useState)(!1),{data:m}=K({queryKey:[`spoolman-settings`],queryFn:Z.getSpoolmanSettings,staleTime:300*1e3}),h=m?.spoolman_enabled===`true`&&!!m?.spoolman_url,{data:g=[],isLoading:_,refetch:v}=K({queryKey:h?[`spoolman-inventory-spools`]:[`inventory-spools`],queryFn:()=>h?Z.getSpoolmanInventorySpools(!1):Z.getSpools(!1),enabled:m!==void 0,refetchInterval:3e4}),{data:b=[]}=K({queryKey:[`spool-assignments`],queryFn:()=>Z.getAssignments(),refetchInterval:3e4,enabled:!h}),{data:x=[]}=K({queryKey:[`spoolman-slot-assignments`],queryFn:()=>Z.getSpoolmanSlotAssignments(),refetchInterval:3e4,enabled:h}),S=q({mutationFn:e=>Z.unassignSpoolmanSlot(e),onSuccess:()=>{a.invalidateQueries({queryKey:[`spoolman-slot-assignments`]}),a.invalidateQueries({queryKey:[`spoolman-inventory-spools`]})},onError:()=>i(n(`inventory.unassignFailed`,`Failed to unassign spool`),`error`)}),C=(0,y.useMemo)(()=>{if(h){let e={};return x.forEach(t=>{e[t.spoolman_spool_id]={ams_id:t.ams_id,tray_id:t.tray_id}}),e}let e={};return b.forEach(t=>{e[t.spool_id]={ams_id:t.ams_id,tray_id:t.tray_id,printer_name:t.printer_name}}),e},[h,b,x]),w=(0,y.useMemo)(()=>g.filter(e=>!e.archived_at),[g]),T=(0,y.useMemo)(()=>new Set(Object.keys(C).map(Number)),[C]),E=(0,y.useMemo)(()=>w.filter(e=>T.has(e.id)).length,[w,T]),D=(0,y.useMemo)(()=>{let e=new Set;return w.forEach(t=>e.add(t.material)),Array.from(e).sort()},[w]),O=(0,y.useMemo)(()=>{let e=w;return c===`in_ams`?e=e.filter(e=>T.has(e.id)):c!==`all`&&(e=e.filter(e=>e.material===c)),e=DU(e,o.trim()),[...e].sort((e,t)=>{let n=+!T.has(e.id),r=+!T.has(t.id);return n===r?new Date(t.updated_at).getTime()-new Date(e.updated_at).getTime():n-r})},[w,c,o,T,r]);return(0,G.jsxs)(`div`,{className:`h-full flex flex-col`,children:[(0,G.jsxs)(`div`,{className:`px-3 pt-3 pb-2 space-y-2.5`,children:[(0,G.jsxs)(`div`,{className:`relative`,children:[(0,G.jsx)(Zl,{className:`absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-white/40`}),(0,G.jsx)(`input`,{type:`text`,value:o,onChange:e=>s(e.target.value),placeholder:n(`spoolbuddy.inventory.searchPlaceholder`,`Search spools...`),className:`w-full pl-9 pr-8 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-sm text-white placeholder-white/30 focus:outline-none focus:border-bambu-green`}),o&&(0,G.jsx)(`button`,{onClick:()=>s(``),className:`absolute right-2 top-1/2 -translate-y-1/2 text-white/40 hover:text-white/60`,children:(0,G.jsx)(td,{className:`w-4 h-4`})})]}),(0,G.jsxs)(`div`,{className:`flex gap-1.5 overflow-x-auto no-scrollbar`,children:[(0,G.jsx)(Q9,{active:c===`all`,onClick:()=>l(`all`),label:`${n(`spoolbuddy.inventory.all`,`All`)} (${w.length})`,green:!0}),E>0&&(0,G.jsx)(Q9,{active:c===`in_ams`,onClick:()=>l(`in_ams`),label:`${n(`spoolbuddy.inventory.inAms`,`In AMS`)} (${E})`}),D.map(e=>(0,G.jsx)(Q9,{active:c===e,onClick:()=>l(c===e?`all`:e),label:e},e))]})]}),(0,G.jsx)(`div`,{className:`flex-1 overflow-y-auto px-3 pb-3`,children:_?(0,G.jsx)(`div`,{className:`flex items-center justify-center py-16`,children:(0,G.jsx)(`div`,{className:`w-8 h-8 border-2 border-bambu-green border-t-transparent rounded-full animate-spin`})}):O.length===0?(0,G.jsxs)(`div`,{className:`flex flex-col items-center justify-center py-16 text-white/30`,children:[(0,G.jsx)(Sl,{className:`w-12 h-12 mb-3`}),(0,G.jsx)(`p`,{className:`text-sm`,children:o||c!==`all`?n(`spoolbuddy.inventory.noResults`,`No spools match your filters`):n(`spoolbuddy.inventory.empty`,`No spools in inventory`)})]}):(0,G.jsx)(`div`,{className:`grid grid-cols-[repeat(auto-fill,minmax(130px,1fr))] gap-2`,children:O.map(e=>(0,G.jsx)(u4e,{spool:e,assignment:C[e.id],onClick:()=>d(e.id)},e.id))})}),u!=null&&(()=>{let n=g.find(e=>e.id===u);return n?(0,G.jsxs)(G.Fragment,{children:[(0,G.jsx)(d4e,{spool:n,assignment:C[n.id],sbState:e,onSyncWeight:()=>{v()},onAssignToAms:()=>p(!0),onUnassignFromAms:h&&C[n.id]?()=>S.mutate(n.id):void 0,onClose:()=>{d(null),p(!1)}}),(0,G.jsx)(y2e,{isOpen:f,onClose:()=>p(!1),spool:n,printerId:t,spoolmanMode:h})]}):null})()]})}function Q9({active:e,onClick:t,label:n,green:r}){return(0,G.jsx)(`button`,{onClick:t,className:`px-4 py-1.5 rounded-full text-sm font-medium border whitespace-nowrap shrink-0 transition-colors ${e?r?`bg-bambu-green/20 text-bambu-green border-bambu-green/50`:`bg-white/10 text-white border-white/20`:`bg-transparent text-white/40 border-bambu-dark-tertiary hover:text-white/60`}`,children:n})}function u4e({spool:e,assignment:t,onClick:n}){let r=r4e(e),i=a4e(e),a=i4e(e),o=Ef(e.color_name,e.rgba,e.color_name_is_synthesized);return(0,G.jsxs)(`button`,{onClick:n,className:`bg-bambu-dark-secondary rounded-xl p-3 flex flex-col items-center text-center gap-1.5 border border-transparent hover:border-bambu-green/50 transition-colors`,children:[(0,G.jsx)(c4e,{color:r,size:56}),(0,G.jsx)(`p`,{className:`text-xs font-semibold text-white leading-tight truncate w-full`,children:o4e(e)}),(0,G.jsxs)(`div`,{className:`flex items-center gap-1 min-w-0 max-w-full`,children:[(0,G.jsx)(`span`,{className:`w-2.5 h-2.5 rounded-full shrink-0 border border-white/10`,style:kf(e.rgba)}),(0,G.jsx)(`span`,{className:`text-[11px] text-white/50 truncate`,children:o||`-`})]}),(0,G.jsxs)(`div`,{className:`w-full space-y-0.5`,children:[(0,G.jsx)(`div`,{className:`h-1.5 bg-bambu-dark-tertiary rounded-full overflow-hidden`,children:(0,G.jsx)(`div`,{className:`h-full rounded-full ${i>50?`bg-bambu-green`:i>20?`bg-yellow-500`:`bg-red-500`}`,style:{width:`${Math.min(i,100)}%`}})}),(0,G.jsxs)(`p`,{className:`text-[11px] text-white/40`,children:[Math.round(a),`g (`,Math.round(i),`%)`]})]}),t&&(0,G.jsx)(`span`,{className:`px-2 py-0.5 rounded text-[10px] font-bold bg-bambu-green/20 text-bambu-green`,children:s4e(t)})]})}function d4e({spool:e,assignment:t,sbState:n,onSyncWeight:r,onAssignToAms:i,onUnassignFromAms:a,onClose:o}){let s=n.deviceOnline&&n.weight!==null?Math.round(n.weight):null,c=e.last_scale_weight==null?null:Math.round(e.last_scale_weight);return(0,G.jsx)(`div`,{className:`fixed inset-0 z-50 bg-black/70 flex items-center justify-center p-4`,onClick:o,children:(0,G.jsx)(`div`,{className:`w-full max-w-md bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-2xl p-4 overflow-y-auto max-h-[90vh]`,onClick:e=>e.stopPropagation(),children:(0,G.jsxs)(`div`,{className:`space-y-3`,children:[t&&(0,G.jsxs)(`div`,{className:`flex items-center justify-center gap-2`,children:[(0,G.jsx)(`span`,{className:`px-2.5 py-1 rounded-md text-xs font-bold bg-bambu-green/20 text-bambu-green`,children:s4e(t)}),t.printer_name&&(0,G.jsx)(`span`,{className:`text-xs text-zinc-400`,children:t.printer_name})]}),(0,G.jsx)(`div`,{className:`flex justify-center`,children:(0,G.jsx)(n4e,{spool:e,liveScaleWeight:s,persistedGrossWeight:c,onSyncWeight:r,onAssignToAms:i,isAssigned:!!t,onUnassignFromAms:a,onClose:o,className:`max-w-md`})})]})})})}var f4e=class extends y.Component{state={error:null,errorInfo:null};static getDerivedStateFromError(e){return{error:e}}componentDidCatch(e,t){this.setState({errorInfo:t}),console.error(`React crash:`,e,t)}render(){return this.state.error?(0,G.jsxs)(`div`,{style:{padding:24,color:`#ef4444`,backgroundColor:`#18181b`,minHeight:`100vh`,fontFamily:`monospace`},children:[(0,G.jsx)(`h1`,{style:{fontSize:20,marginBottom:12},children:`UI Crash`}),(0,G.jsx)(`pre`,{style:{whiteSpace:`pre-wrap`,fontSize:14},children:this.state.error.message}),(0,G.jsx)(`pre`,{style:{whiteSpace:`pre-wrap`,fontSize:12,color:`#a1a1aa`,marginTop:12},children:this.state.error.stack}),(0,G.jsx)(`button`,{onClick:()=>{this.setState({error:null,errorInfo:null})},style:{marginTop:16,padding:`8px 16px`,backgroundColor:`#3b82f6`,color:`#fff`,border:`none`,borderRadius:8,cursor:`pointer`},children:`Retry`})]}):this.props.children}},p4e=new ao({defaultOptions:{queries:{staleTime:1e3*60,retry:1}}});function m4e(){return O$e(),null}function h4e({children:e}){return j0e(),I0e(),(0,G.jsx)(G.Fragment,{children:e})}function g4e({children:e}){let{authEnabled:t,loading:n,user:r}=jd(),i=rr();return n?(0,G.jsx)(`div`,{className:`min-h-screen flex items-center justify-center`,children:`Loading...`}):t&&!r?(0,G.jsx)(Fr,{to:`/login`,replace:!0,state:{from:i}}):(0,G.jsx)(G.Fragment,{children:e})}function $9({permission:e,children:t}){let{authEnabled:n,loading:r,user:i,hasPermission:a}=jd(),o=rr();return r?(0,G.jsx)(`div`,{className:`min-h-screen flex items-center justify-center`,children:`Loading...`}):n?i?a(e)?(0,G.jsx)(G.Fragment,{children:t}):(0,G.jsx)(Fr,{to:`/`,replace:!0}):(0,G.jsx)(Fr,{to:`/login`,replace:!0,state:{from:o}}):(0,G.jsx)(G.Fragment,{children:t})}function _4e({children:e}){let{authEnabled:t,loading:n}=jd();return n?(0,G.jsx)(`div`,{className:`min-h-screen flex items-center justify-center`,children:`Loading...`}):t?(0,G.jsx)(Fr,{to:`/login`,replace:!0}):(0,G.jsx)(G.Fragment,{children:e})}function v4e(){return(0,G.jsx)(f4e,{children:(0,G.jsx)(tf,{children:(0,G.jsx)(lo,{client:p4e,children:(0,G.jsx)(tee,{children:(0,G.jsx)(Nd,{children:(0,G.jsx)(L0e,{children:(0,G.jsxs)(kke,{children:[(0,G.jsx)(m4e,{}),(0,G.jsx)(Oi,{children:(0,G.jsxs)(zr,{children:[(0,G.jsx)(Lr,{path:`/setup`,element:(0,G.jsx)(_4e,{children:(0,G.jsx)(D0e,{})})}),(0,G.jsx)(Lr,{path:`/login`,element:(0,G.jsx)(E0e,{})}),(0,G.jsx)(Lr,{path:`/camera/:printerId`,element:(0,G.jsx)(M$e,{})}),(0,G.jsx)(Lr,{path:`/overlay/:printerId`,element:(0,G.jsx)(J$e,{})}),(0,G.jsx)(Lr,{path:`/camwall`,element:(0,G.jsx)(H$e,{})}),(0,G.jsxs)(Lr,{element:(0,G.jsx)(g4e,{children:(0,G.jsx)(h4e,{children:(0,G.jsx)(Z0e,{})})}),children:[(0,G.jsx)(Lr,{path:`spoolbuddy`,element:(0,G.jsx)(E2e,{})}),(0,G.jsx)(Lr,{path:`spoolbuddy/ams`,element:(0,G.jsx)(j2e,{})}),(0,G.jsx)(Lr,{path:`spoolbuddy/write-tag`,element:(0,G.jsx)(Y2e,{})}),(0,G.jsx)(Lr,{path:`spoolbuddy/inventory`,element:(0,G.jsx)(l4e,{})}),(0,G.jsx)(Lr,{path:`spoolbuddy/settings`,element:(0,G.jsx)(W2e,{})}),(0,G.jsx)(Lr,{path:`spoolbuddy/calibration`,element:(0,G.jsx)(K2e,{})})]}),(0,G.jsxs)(Lr,{element:(0,G.jsx)(g4e,{children:(0,G.jsx)(h4e,{children:(0,G.jsx)(See,{})})}),children:[(0,G.jsx)(Lr,{index:!0,element:(0,G.jsx)(wke,{})}),(0,G.jsx)(Lr,{path:`archives`,element:(0,G.jsx)(RBe,{})}),(0,G.jsx)(Lr,{path:`queue`,element:(0,G.jsx)(qHe,{})}),(0,G.jsx)(Lr,{path:`pipelines/runs`,element:(0,G.jsx)(Fr,{to:`/queue?tab=pipelines`,replace:!0})}),(0,G.jsx)(Lr,{path:`stats`,element:(0,G.jsx)(fUe,{})}),(0,G.jsx)(Lr,{path:`profiles`,element:(0,G.jsx)(wKe,{})}),(0,G.jsx)(Lr,{path:`finance`,element:(0,G.jsx)($9,{permission:`cost_centers:read_own`,children:(0,G.jsx)(JGe,{})})}),(0,G.jsx)(Lr,{path:`maintenance`,element:(0,G.jsx)(kKe,{})}),(0,G.jsx)(Lr,{path:`projects`,element:(0,G.jsx)(PKe,{})}),(0,G.jsx)(Lr,{path:`projects/:id`,element:(0,G.jsx)(zKe,{})}),(0,G.jsx)(Lr,{path:`inventory`,element:(0,G.jsx)(e0e,{})}),(0,G.jsx)(Lr,{path:`files`,element:(0,G.jsx)(S$e,{})}),(0,G.jsx)(Lr,{path:`files/trash`,element:(0,G.jsx)(T$e,{})}),(0,G.jsx)(Lr,{path:`makerworld`,element:(0,G.jsx)($9,{permission:`makerworld:view`,children:(0,G.jsx)(h0e,{})})}),(0,G.jsx)(Lr,{path:`settings`,element:(0,G.jsx)($9,{permission:`settings:read`,children:(0,G.jsx)(UGe,{})})}),(0,G.jsx)(Lr,{path:`groups/new`,element:(0,G.jsx)($9,{permission:`groups:create`,children:(0,G.jsx)(X$e,{})})}),(0,G.jsx)(Lr,{path:`groups/:id/edit`,element:(0,G.jsx)($9,{permission:`groups:update`,children:(0,G.jsx)(X$e,{})})}),(0,G.jsx)(Lr,{path:`users`,element:(0,G.jsx)(Fr,{to:`/settings?tab=users`,replace:!0})}),(0,G.jsx)(Lr,{path:`groups`,element:(0,G.jsx)(Fr,{to:`/settings?tab=users`,replace:!0})}),(0,G.jsx)(Lr,{path:`system`,element:(0,G.jsx)(x0e,{})}),(0,G.jsx)(Lr,{path:`notifications`,element:(0,G.jsx)(O0e,{})}),(0,G.jsx)(Lr,{path:`gcode-viewer`,element:(0,G.jsx)(k0e,{})}),(0,G.jsx)(Lr,{path:`external/:id`,element:(0,G.jsx)(Y$e,{})}),(0,G.jsx)(Lr,{path:`camera-tokens`,element:(0,G.jsx)(Fr,{to:`/settings?tab=apikeys#card-camera-tokens`,replace:!0})})]})]})})]})})})})})})})}(0,b.createRoot)(document.getElementById(`root`)).render((0,G.jsx)(y.StrictMode,{children:(0,G.jsx)(v4e,{})}));
\ No newline at end of file
diff --git a/static/index.html b/static/index.html
index 847a1f19d..2dba3c332 100644
--- a/static/index.html
+++ b/static/index.html
@@ -26,7 +26,7 @@
 
     <!-- Splash screens for iOS -->
     <link rel="apple-touch-startup-image" href="/img/android-chrome-512x512.png" />
-    <script type="module" crossorigin src="/assets/index-CN5d-0KI.js"></script>
+    <script type="module" crossorigin src="/assets/index-CCYi0XHi.js"></script>
     <link rel="stylesheet" crossorigin href="/assets/index-ChscM3lF.css">
   </head>
   <body>